Chunk 1:
March 11, 2025 at 1:13 PM, Mohammad Amir invited duzzaman Md (MCS).
March 11, 2025 at 1:19 PM, Mohammad Amir: Several jobs are in pending status because of this issue. Thank you very much!
March 11, 2025 at 1:26 PM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) pm님 원자재포트 35번포트 원자재 agv4호기 진입 시 한쪽으로 치우쳐 알람 또 발생했습니다
March 11, 2025 at 1:27 PM, Gerbovits Kevin: Solved
March 11, 2025 at 1:27 PM, Mohammad Amir: Thank you very much!

Chunk 2:
March 11, 2025 at 1:28 PM, 배병민 (Bae Byoungmin): 네 4호기는 아직 업데이트가 안되어 진행예정입니다. 타호기 지금 점검으로 잠시 4호기 투입하였는데 곧 교체예정입니다
March 11, 2025 at 1:33 PM, 권민석/Kwon Minseok: 네 현지 인원 메뉴얼 동작 후 정상 작동 중입니다.해당 agv언제 업데이트 일까요??
March 11, 2025 at 1:35 PM, FA CS AGV Jawad: Solved
March 11, 2025 at 1:39 PM, 배병민 (Bae Byoungmin): 일정은 아직 미정입니다. 우선 금일까지 원자재 1,2,3호기 AGV 점검이 끝날 예정으로 1,2,3호기 정상 운영하면 문제는 없겠습니다.
March 11, 2025 at 2:57 PM, Tóth Gyula: @Denkó Jani (F.A.) MOCNV033 problem Help ME!

Chunk 3:
March 11, 2025 at 2:58 PM, Denkó Jani (F.A.): Megyünk führer 🫡
March 11, 2025 at 2:58 PM, Mohammad Amir: @FA @Denkó Jani (F.A.) There is Stop Detect error at BP04. Thank you!
March 11, 2025 at 2:58 PM, Tóth Gyula: Gyere Múcs 😄
March 11, 2025 at 3:05 PM, Denkó Jani (F.A.): Pfertig 💪
March 11, 2025 at 3:17 PM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M4MFA300_P27,26 there is Front light curtain mutting error. Thank you very much!

Chunk 4:
March 11, 2025 at 3:22 PM, Denkó Jani (F.A.): @Kovács Kármen solved it 🙈
March 11, 2025 at 3:23 PM, Mohammad Amir: Thank you very much!
March 11, 2025 at 3:44 PM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0STK026_C01 there is MCP 1F OP2 light curtain detected error . Thank you very much!
March 11, 2025 at 4:31 PM, Horváth Adriàn: @Denkó Jani (F.A.) @Boromisza Zoltán gyertek pls a 3as sor endplatehez

Chunk 5:
March 11, 2025 at 4:58 PM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0CNV023_35_028 there is Wrapper Wrap Residual Det. Alarm . Thank you very much!
March 11, 2025 at 4:59 PM, Rácz Dániel / FA: @Denkó Jani (F.A.) 😎
March 11, 2025 at 5:54 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.11 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 6:
March 11, 2025 at 6:18 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(1): Göltl Noémi

Chunk 7:
March 11, 2025 at 9:14 PM, Shahbaz 샤바즈 MCS/RTD: @FA The job for M3MFA300_P30 is in alternated state as port is OOS. Please check. Thank you.
March 11, 2025 at 9:27 PM, Csepi Árpád: “The port is switching to automaton mode!”
March 11, 2025 at 9:54 PM, Alexandra: 2F cv026 stop detect error
March 11, 2025 at 10:04 PM, Csepi Árpád: Solved
March 11, 2025 at 11:12 PM, Shahbaz 샤바즈 MCS/RTD: @FA There is alternated job for M3MFA300_P06 as port is currently OOS. Please check Thank you.

Chunk 8:
March 11, 2025 at 11:20 PM, Csepi Árpád: “The production maintenance team repaired the equipment. The port is now operating in automatic mode again!”
March 12, 2025 at 12:24 AM, Shahbaz 샤바즈 MCS/RTD: @FA There is a job on AGV#04 for M3MFA300_P25, but P25 is OOS. As a result, AGV#04 is interrupting other AGV transfers. Please check. Thank you.
March 12, 2025 at 2:52 AM, Alexandra: 2F in lift floor in position error
March 12, 2025 at 2:55 AM, Csepi Árpád: Solved

Chunk 9:
March 12, 2025 at 6:20 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:12/13 Overtime (0): - Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 10:
March 12, 2025 at 6:47 AM, 이연수: @권민석/Kwon Minseok @배병민 (Bae Byoungmin) @주석 어제 셀 전창고 AGV 8호기 충전job 미생성 원인은 이전 충전job이 남아있었기 때문인 것으로 파악됩니다. AGV 삭제/재등록 시에 기존 충전job 삭제후 진행하시길 부탁드립니다. CommandID 가 EVT- 로 시작되는게 충전job 입니다.
March 12, 2025 at 6:47 AM, 이연수: Photo
March 12, 2025 at 6:48 AM, 이연수: 정정합니다. EVT 가 아니라 CHR 입니다.

Chunk 11:
March 12, 2025 at 7:45 AM, N.Gábor F.A.: @Mcs Good morning, I would like to ask you to cancel the work of these 2 pallets, PS22A-2502240036, PS22A-2502140058, the order has been in for days but it is not being fulfilled and the material is in the warehouse in its place. Thank you
March 12, 2025 at 7:52 AM, Shakir (MCS): Good morning, Both jobs have been canceled. ✅ Thank you
March 12, 2025 at 7:52 AM, N.Gábor F.A.: Thank you very much

Chunk 12:
March 12, 2025 at 7:53 AM, FACS_JaewonShin: 12th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong
March 12, 2025 at 7:53 AM, Shakir (MCS): You’re welcome
March 12, 2025 at 8:46 AM, Tóth Gyula: Hallo, M0CNV036 wh. Error Please help ME.

Chunk 13:
March 12, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호: There is an alarm on the GF Outlift at the South Cell Dock. We are in the process of shipment today, so please check it quickly
March 12, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호: 남측 셀 도크장 GF 아웃리프트에 알람 발생하였습니다. 금일 출하 작업 중이어서 빠른 확인 바랍니다
March 12, 2025 at 8:49 AM, FACS_JaewonShin: FA technician and FA CS will go there
March 12, 2025 at 8:49 AM, FACS_JaewonShin: 현지 테크니션이랑 CS인원 현장으로 보내겠습니다
March 12, 2025 at 9:00 AM, FACS_JaewonShin: 조치 완료되었습니다

Chunk 14:
March 12, 2025 at 9:57 AM, Shakir (MCS): @FA @N.Gábor F.A. Please check M0STK031_P12 is OOS, jobs are getting delayed. Thank you
March 12, 2025 at 10:01 AM, N.Gábor F.A.: Checking
March 12, 2025 at 10:02 AM, Szabolcs: @FA Please check M0CNV033 RTV problem.
March 12, 2025 at 10:08 AM, Shakir (MCS): Issue has been resolved. Material flow normalize. ✅ Thank you
March 12, 2025 at 10:09 AM, N.Gábor F.A.: Your welcome

Chunk 15:
March 12, 2025 at 10:32 AM, 권민석/Kwon Minseok: Module 3,4 line material discharge lift stopped. Please check it out.
March 12, 2025 at 10:50 AM, 권민석/Kwon Minseok: Are you working on this?
March 12, 2025 at 10:51 AM, FACS_Youngmin LEE: 현재 조치중입니다.
March 12, 2025 at 11:01 AM, FACS_Youngmin LEE: @권민석/Kwon Minseok 조치완료 되었습니다.
March 12, 2025 at 11:02 AM, N.Gábor F.A.: @Mcs M0CNV035 is oos 1-5 minutes
March 12, 2025 at 11:03 AM, Shakir (MCS): Thank you for the information

Chunk 16:
March 12, 2025 at 11:08 AM, N.Gábor F.A.: We are done, next is M0CNV034 1-5 Minutes oos
March 12, 2025 at 11:19 AM, N.Gábor F.A.: We are done
March 12, 2025 at 11:21 AM, Shakir (MCS): Please check M0STK027 and stk25 both are OOS. @FA Thank you
March 12, 2025 at 11:38 AM, FACS_JaewonShin: Wrap is made problem. FA technician and FACS on line
March 12, 2025 at 11:43 AM, FACS_JaewonShin: M0STK025 has been returned normal

Chunk 17:
March 12, 2025 at 11:44 AM, FACS_JaewonShin: It is occured double cargo. We will check again
March 12, 2025 at 12:08 PM, Shakir (MCS): @FA Please check E0CNV023_028, wrapper heater temp alarm. Thank you
March 12, 2025 at 12:12 PM, Dávid F.A.: Foil replacement is in progress! Thank you for the information

Chunk 18:
March 12, 2025 at 12:41 PM, Shakir (MCS): @FA Please check there is carrier PS210-2502110063 located at M0CNV034_P19 but it is not moving alternated and blocking other carriers. It has job to go to STK028_Z01. Thank you very much!
March 12, 2025 at 1:26 PM, 권민석/Kwon Minseok: @fa material agv Unit 2 stopped. Please check the status quo.
March 12, 2025 at 1:26 PM, FA CS AGV Jawad: I do

Chunk 19:
March 12, 2025 at 4:32 PM, Shakir (MCS): @FA @Dávid F.A. PS230-2503100014 job is alternated because of M3MFA300_P29 port is OOS. Please check Thank you
March 12, 2025 at 4:35 PM, N.Gábor F.A.: Now auto
March 12, 2025 at 4:37 PM, Shakir (MCS): Thank you, Now the job has been normalize. ✅

Chunk 20:
March 12, 2025 at 6:04 PM, Farkas Tamàs: Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (4) Simon Attila Marsi Gábor Skwarek Tibor Viczai Tomi ———————————— Assembly(6) Csuti Zoltán Fabriczius Gergő Gégény Dávid Lajos Gábor Nagy Tamás Kertész Dani ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc
March 12, 2025 at 7:17 PM, VacziGyula: Sziasztok! 2emeleten Conveyor det error C/V ccw stop time over

Chunk 21:
March 12, 2025 at 7:18 PM, Zoltán Harasztia FA: Megyünk
March 12, 2025 at 7:49 PM, Shahbaz 샤바즈 MCS/RTD: @FA M0CNV032_RTV01 is OOS. Please check Thank you.
March 12, 2025 at 7:50 PM, Döme György F.A: Solved
March 12, 2025 at 10:31 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.12 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 22:
March 13, 2025 at 6:17 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:10/13 Overtime (0): - Sick (1):Nagy Zsolt Holiday (1): Kasztel Balázs Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): Zsurbej Zsolt, Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 13, 2025 at 6:30 AM, Simon Attila: Please check Second floor Wrapper unit and out lift error Thank you
March 13, 2025 at 6:31 AM, N.Gábor F.A.: Checking

Chunk 23:
March 13, 2025 at 8:15 AM, N.Gábor F.A.: @MCS Good Morning M0STK033 will be stopped for 10-15 minutes due to PM
March 13, 2025 at 8:16 AM, Shakir (MCS): Thank you for the information
March 13, 2025 at 8:16 AM, N.Gábor F.A.: Your welcome
March 13, 2025 at 9:35 AM, FACS_JaewonShin: 13th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong

Chunk 24:
March 13, 2025 at 9:51 AM, Shakir (MCS): @FA @N.Gábor F.A. Please check M0STK027_C01 there is double Cargo alarm that's why several jobs are getting delayed. Thank you very much!
March 13, 2025 at 9:52 AM, N.Gábor F.A.: Checking
March 13, 2025 at 10:06 AM, Shakir (MCS): The issue has been resolved, now operation normalize ✅ Thank you
March 13, 2025 at 11:15 AM, N.Gábor F.A.: @Mcs Hello, can you send back the U015374 to the storage? Currently is on the Vc05 agv...

Chunk 25:
March 13, 2025 at 11:22 AM, Shakir (MCS): The Transfer command has been initiated ✅ Thank you
March 13, 2025 at 11:22 AM, FACS_JaewonShin: I checked VC05 made job
March 13, 2025 at 11:22 AM, FACS_JaewonShin: Thanks all
March 13, 2025 at 11:22 AM, N.Gábor F.A.: Thank you very much It's completed
March 13, 2025 at 11:23 AM, Shakir (MCS): You’re welcome
March 13, 2025 at 11:25 AM, FACS_JaewonShin: U015374 stacked completed

Chunk 26:
March 13, 2025 at 11:43 AM, FACS_JaewonShin: @MCS Is it possible to make cluster for 6314 in GF endproduct? Some times agv show ODS on 6077, 6056 because of occupation 6314 agv
March 13, 2025 at 11:44 AM, Shakir (MCS): FA team can do this @FA please check Thank you

Chunk 27:
March 13, 2025 at 11:49 AM, N.Gábor F.A.: My suggestion is to move node 6057 further away on the map. I recommend this because if an AGV is at point 6057 and another one wants to move from point 6056 to point 6314/6077, this ODS error could occur, and in my opinion, this could be a solution.
March 13, 2025 at 11:50 AM, FACS_JaewonShin: I will discuss with mr bae on weekly meeting on 15:30
March 13, 2025 at 11:50 AM, N.Gábor F.A.: Okay, thank you.

Chunk 28:
March 13, 2025 at 11:52 AM, N.Gábor F.A.: @MCS we are working on M0CNV032-RTV
March 13, 2025 at 12:54 PM, FA/CS/AGV/Taimur: @MCS AS per SL for line 5 EOL the port is on manual mode but it still getting auto load for UNL. Please amend the job for AGV: 07 with carrier: T701780 to sent it back to origin. Thanks
March 13, 2025 at 12:57 PM, FA/CS/AGV/Taimur: @Shakir (MCS) please ignore. As the pallet has been unloaded into destination. Thank you

Chunk 29:
March 13, 2025 at 12:57 PM, Shakir (MCS): Transfer job exist for F5CPM010_P01, why the port are in manual there is some issue?
March 13, 2025 at 12:58 PM, Shakir (MCS): Okay, transport job completed ✔️ Thank you

Chunk 30:
March 13, 2025 at 6:05 PM, Farkas Tamàs: Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (4) Simon Attila Marsi Gábor Skwarek Tibor Viczai Tomi ———————————— Assembly(6) Csuti Zoltán Fabriczius Gergő Gégény Dávid Lajos Gábor Nagy Tamás Kertész Dani ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc

Chunk 31:
March 13, 2025 at 11:16 PM, Döme György F.A: @MCS Could you please update the data? There is a pallet (PS22A-2502280020) at port M3MFA300_P34, but it is not visible in the MSC. Additionally, there is another material (PS22A-2502200032) at M4MFA300_P35.
March 13, 2025 at 11:17 PM, VK (mcs): Checking
March 13, 2025 at 11:28 PM, VK (mcs): MCS modified
March 13, 2025 at 11:29 PM, Döme György F.A: Thank you very much!
March 13, 2025 at 11:30 PM, VK (mcs): Most welcome

Chunk 32:
March 14, 2025 at 4:43 AM, VK (mcs): @FA Please check M0STK026 Crane ankle right detect error
March 14, 2025 at 4:48 AM, Döme György F.A: Checking

Chunk 33:
March 14, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 0Sl Overtime(0): - Holiday(0): - Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Pintye Miklós László --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pálosi Róbert, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 34:
March 14, 2025 at 6:55 AM, (Unknown): Hello! 2. E. Fólia nem fóliáz!
March 14, 2025 at 6:57 AM, Denkó Jani (F.A.): Hamarosan érkezünk
March 14, 2025 at 7:46 AM, FACS_JaewonShin: 14th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong

Chunk 35:
March 14, 2025 at 8:00 AM, Denkó Jani (F.A.): @Mohammad Amir hy. please make a task for the one agv so that M0OQC001_P01 -->M0CNV031-P01 takes the palette U015329. Thanks
March 14, 2025 at 8:01 AM, Mohammad Amir: Hello, Working on it!
March 14, 2025 at 8:02 AM, Mohammad Amir: Please confirm the current location of the carrier U015329. Thank you very much!
March 14, 2025 at 8:03 AM, Denkó Jani (F.A.): Yes sir yes 🫡

Chunk 36:
March 14, 2025 at 8:04 AM, Mohammad Amir: Is the carrier U015329 located at M00QC001_P01? Thank you very much!
March 14, 2025 at 8:05 AM, Denkó Jani (F.A.): Yes
March 14, 2025 at 8:08 AM, Mohammad Amir: Location has been updated successfully ✅ Working on the rest ! Thank you very much!
March 14, 2025 at 8:17 AM, Denkó Jani (F.A.): nothing happens🙄
March 14, 2025 at 8:18 AM, Mohammad Amir: Issue has been resolved ✅.

Chunk 37:
March 14, 2025 at 8:19 AM, Mohammad Amir: AGV#7 has been assigned.✅ Carrier on the way , monitoring the transfer. Thank you very much!
March 14, 2025 at 8:26 AM, Mohammad Amir: Job has been completed successfully ✅. Thank you very!
March 14, 2025 at 8:28 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0STK032_P02 it is OOS. Thank you very much!
March 14, 2025 at 8:36 AM, Denkó Jani (F.A.): Solved
March 14, 2025 at 8:37 AM, Mohammad Amir: Thank you very much!

Chunk 38:
March 14, 2025 at 8:46 AM, 권민석/Kwon Minseok invited 승규 (BAEK SEUNGGYU).
March 14, 2025 at 8:46 AM, 권민석/Kwon Minseok invited 윤성제(Yoon SungJe).
March 14, 2025 at 8:46 AM, 권민석/Kwon Minseok: 1
March 14, 2025 at 9:14 AM, Kovács Kármen: @Denkó Jani (F.A.) @Boromisza Zoltán van egy kis fennakadás a 3-4 sorok között. Tudnátok segíteni?
March 14, 2025 at 9:23 AM, Boromisza Zoltán: Megoldva

Chunk 39:
March 14, 2025 at 9:24 AM, Roland: Sziasztok. Megntudnatok nezni a M0CNV022-CV015 Work data es div pallet detect error hibat? Koszonom
March 14, 2025 at 9:25 AM, 김지형(Jihyung Kim): @배병민 (Bae Byoungmin) 3-4라인 4번 agv가 회전시 반대편 agv 만나서 서로 알람치고 있는 현상이었으며 테크니션이 수동으로 agv 옮겨서 해결하였습니다. 근본적인 agv 동선 점검 및 시나리오 개선 필요해보입니다.
March 14, 2025 at 9:34 AM, Denkó Jani (F.A.): Solved
March 14, 2025 at 10:05 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0STK027_P21,22 it is OOS . Thank you very much!

Chunk 40:
March 14, 2025 at 10:06 AM, Boromisza Zoltán: Okey
March 14, 2025 at 10:10 AM, 배병민 (Bae Byoungmin): 네,확인해보겠습니다 감사합니다
March 14, 2025 at 10:15 AM, Boromisza Zoltán: Solved
March 14, 2025 at 10:16 AM, Mohammad Amir: Thank you very much!
March 14, 2025 at 10:47 AM, Roland: The pallet strap got caught in the sensor on the M0CNV022_M01 IN port and bent it. Could you take a look? Thank you
March 14, 2025 at 10:49 AM, FACS_JaewonShin: @FA technician Please check M0CNV022_M01

Chunk 41:
March 14, 2025 at 11:04 AM, Radics András left this chatroom.
March 14, 2025 at 11:05 AM, FACS_JaewonShin: M0CNV022_M01 has damaged at pallet detect sensor by forklift It need to spend time for fixing
March 14, 2025 at 11:32 AM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0STK021_C01 there is CRANE fork left wide#1 check error. Several transfer commands are getting delayed. Thank you very much!

Chunk 42:
March 14, 2025 at 11:36 AM, FACS_JaewonShin: @MCS Could you check why job is not created in M0CNV22_M01?
March 14, 2025 at 11:36 AM, Mohammad Amir: Checking
March 14, 2025 at 11:38 AM, Mohammad Amir: Could you please tell me is there any carrier exists currently at M01. Thank you very much!
March 14, 2025 at 11:38 AM, FACS_JaewonShin: Yes it have
March 14, 2025 at 11:38 AM, Mohammad Amir: Please tell me the carrier Id. Thank you very much!

Chunk 43:
March 14, 2025 at 11:39 AM, FACS_JaewonShin: Ps230-2503040018
March 14, 2025 at 11:40 AM, FACS_JaewonShin: It looks like lost destination
March 14, 2025 at 11:40 AM, 김지형(Jihyung Kim): @Choi Inbo/최인보 @김승태 @양원석 T704633 셀파렛트 이력확인결과 7시 7분 4라인 도착 7시 47분 라인에서 unload request : 원인 파악필요 7시 58분 : 자동화창고 반품 8시 3분 : 자동화창고 렛아웃 to 설비 설비에서 반품해서 자창 들어가면 자동 보류 잡혀서 렉아웃되면 안되는데 다시 설비로 배출된 사유 확인부탁드립니다.
March 14, 2025 at 11:41 AM, Mohammad Amir: This message was deleted.

Chunk 44:
March 14, 2025 at 11:41 AM, FACS_JaewonShin: It is moving now.
March 14, 2025 at 11:42 AM, FACS_JaewonShin: It was problem on m01 sensor damaged so it was retried
March 14, 2025 at 11:43 AM, Mohammad Amir: Issue seems to be resolved now ✅. Job has been created with destination STK26_Z01. Thank you very much!
March 14, 2025 at 11:43 AM, FACS_JaewonShin: Could you check why CCS didnt send to us destination?

Chunk 45:
March 14, 2025 at 11:44 AM, Mohammad Amir: Yes , we received RackinValid at 11:41 and after job was created. Thank you very much!
March 14, 2025 at 11:49 AM, Mohammad Amir: We received carrier id read message at 11:41 it self and rackin at 11:41 and after job was created. Before this we didn't receive id read message for the mentioned carrier that's why job was not getting created. Thank you very much!

Chunk 46:
March 14, 2025 at 11:53 AM, Mohammad Amir: Maybe due to sensor issue id read did not get succed. @CCS could you please check this issue. Why there was delay in id read message receiving. Thank you very much!
March 14, 2025 at 12:02 PM, Mohammad Amir: @FA @Boromisza Zoltán Please check this issue still exists. Thank you very much!
March 14, 2025 at 12:08 PM, Boromisza Zoltán: Okey

Chunk 47:
March 14, 2025 at 12:20 PM, Horváth Adriàn: @Boromisza Zoltán @Denkó Jani (F.A.) @Gerbovits Kevin 3-4 között az AGVk leparkoltak.. Nézzétek meg pls.
March 14, 2025 at 12:28 PM, Boromisza Zoltán: Kész
March 14, 2025 at 1:21 PM, Mohammad Amir: @FA @Boromisza Zoltán Please check M0STK012_P10 there is AGV PIO Interface error. Thank you very much!
March 14, 2025 at 1:33 PM, Denkó Jani (F.A.): Solved sír🫡
March 14, 2025 at 1:35 PM, Mohammad Amir: Thank you very much!

Chunk 48:
March 14, 2025 at 1:57 PM, Horváth Adriàn: @Boromisza Zoltán @Denkó Jani (F.A.) 3as sor Endplate buffernél kis agv lepihent. Csekkoljàtok pls
March 14, 2025 at 2:00 PM, Denkó Jani (F.A.): Pár perc és ott az erősítés 💪
March 14, 2025 at 2:04 PM, FA/CS/AGV/Taimur: Solved.

Chunk 49:
March 14, 2025 at 3:17 PM, 양원석: @김지형(Jihyung Kim) @Choi Inbo/최인보 @김승태 07:59:17 inventoryreturn, 스토커 저장완료 07:59:33 T704633 반송자재 선정되어 4라인으로 반송명령생성 07:59:35 inventoryretunreply Wms에서 inventoryreturn처리에 18초가량 소요되는 중에 RTD에서 명령생성된것으로 보입니다.
March 14, 2025 at 3:21 PM, 김지형(Jihyung Kim): 앞으로 동일 현상이 발생할 가능성이 있으므로 인벤토리 리턴 리플라이 내려오기 전에는 반송자재로 선정 안되게 로직 변경 가능할까요? 인터락이 필요해보입니다
March 14, 2025 at 3:21 PM, 김지형(Jihyung Kim): @Choi Inbo/최인보 wms도 확인부탁드립니다

Chunk 50:
March 14, 2025 at 4:23 PM, 경준: @김지형(Jihyung Kim) 관련로직은 현재 WMS를 거치지 않고 모듈쪽에서 처리가 되고 있습니다. 김승태 과장님이 확인 후 답변 주신다고 하셨습니다.
March 14, 2025 at 4:33 PM, 양원석: 모듈 분석결과 확인후 검토해보겠습니다
March 14, 2025 at 4:37 PM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0STK25 _C01 there is MCP 2F OP 1 error. Thank you very much!
March 14, 2025 at 4:46 PM, Denkó Jani (F.A.): Solved
March 14, 2025 at 4:47 PM, Mohammad Amir: Thank you very much!

Chunk 51:
March 14, 2025 at 4:59 PM, Kovács Krisztián: Line 3 m3mfa300trop#3 hoz kérnék teknikust
March 14, 2025 at 5:00 PM, Denkó Jani (F.A.): Incoming 😎
March 14, 2025 at 5:01 PM, Kovács Krisztián: Köszönjük a hozzáállást
March 14, 2025 at 5:10 PM, Denkó Jani (F.A.): Megoldva,uram 🫡🫡
March 14, 2025 at 6:14 PM, 김승태: 모듈 반품 진행할때는 모듈 데이터 처리, erp처리와 더불어 조립테이블 보류 테이블, wms 셀입고 테이블, 셀id 테이블를 직접 DB로 반품 처리 하고 있습니다 다른 시스템과 연관관계 때문에 다른 파트와 협업하여 확인이 필요합니다 추가적으로 확인하고 공유 드리겠습니다

Chunk 52:
March 14, 2025 at 6:19 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 53:
March 14, 2025 at 8:20 PM, VK (mcs): @FA @manufacturing There is a job to the 4th line module assembly M4MFA300-P29 But port is out of service. please check
March 14, 2025 at 8:29 PM, Magosi Erik: I see in RTD there is a LR to the port. Can You remove the LR. Because the port is in manual mode. If You could not or if its easier we can make a LR to it
March 14, 2025 at 8:31 PM, VK (mcs): Yes LR received at 19:53:30 I will cancel the job.
March 14, 2025 at 8:32 PM, Magosi Erik: Thank You

Chunk 54:
March 14, 2025 at 9:24 PM, VK (mcs): @FA Please check 2F M0STK027 MCP OP2 light curtain detect error!
March 14, 2025 at 9:40 PM, Csepi Árpád: Solved
March 14, 2025 at 11:41 PM, VK (mcs): @FA Please check M0STK027 Crane ankle right detect error
March 14, 2025 at 11:48 PM, Brázik János: Solved
March 15, 2025 at 12:56 AM, VK (mcs): @FA Please check 4th line module assembly M4MFA300 port 29 is OoS Carrier is waiting on CNV output port.

Chunk 55:
March 15, 2025 at 1:02 AM, Alexandra: Sziasztok! 2. Emeleten nem megy tovább a raklap a lifthez.
March 15, 2025 at 1:08 AM, Csepi Árpád: Volt egy kis torlódás itt lent a GF szinten. Fent 2F elindult?
March 15, 2025 at 1:10 AM, Csepi Árpád: The port operates in automatic mode!
March 15, 2025 at 1:16 AM, VK (mcs): @FA Please check 2F M0CN 023 track (83-004) Stop detect error!
March 15, 2025 at 1:31 AM, Csepi Árpád: Solved

Chunk 56:
March 15, 2025 at 6:38 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.15 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom 3. Baek hojong Köszönöm szépen

Chunk 57:
March 15, 2025 at 6:42 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 0Sl Overtime(2): Kertész Kornél Dániel, Szabadi Miklós Holiday(1): Radics András Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Szabadi Miklós --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Takarítás(2): Kertész kornél Dániel, Pálo

Chunk 58:
March 15, 2025 at 7:19 AM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0STK028_C01 there is CRANE FORK Left collapse detect 1 error. Thank you very much!
March 15, 2025 at 7:35 AM, Rácz Dániel / FA: @Denkó Jani (F.A.) Start ! 😎
March 15, 2025 at 7:39 AM, Denkó Jani (F.A.): Solved 🫡🫡
March 15, 2025 at 7:39 AM, Mohammad Amir: Thank you very much!
March 15, 2025 at 12:31 PM, 배병민 (Bae Byoungmin): @FA Technician M0CNV023_RTV02 Please check the work data error.

Chunk 59:
March 15, 2025 at 12:34 PM, Kovács Krisztián: Line 3 agv stuck end plate állomáson
March 15, 2025 at 12:34 PM, Kovács Krisztián: Teknikusi segítség szükségeltetik
March 15, 2025 at 12:38 PM, Rácz Dániel / FA: @Denkó Jani (F.A.)
March 15, 2025 at 12:40 PM, Szücs Géza FT-B: @Mr @ACS
March 15, 2025 at 12:48 PM, Mohammad Amir: @Denkó Jani (F.A.) Could you please check this error because of this several jobs are pending. Thank you very much!

Chunk 60:
March 15, 2025 at 1:07 PM, FA/CS/AGV/Taimur: Solved. Thank you
March 15, 2025 at 1:08 PM, Kovács Krisztián: Thankyou
March 15, 2025 at 1:08 PM, (Unknown): Sziasztok a második emeletre a hátsó raktárba kèrek szèpen segitsèget
March 15, 2025 at 1:22 PM, Denkó Jani (F.A.): This message was deleted.
March 15, 2025 at 1:22 PM, Denkó Jani (F.A.): Solved
March 15, 2025 at 1:22 PM, Denkó Jani (F.A.): @Gerbovits Kevin megoldotta 🫡💪

Chunk 61:
March 15, 2025 at 1:32 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV022 is OOS that's why several jobs are pending. Thank you very much!
March 15, 2025 at 1:33 PM, Mohammad Amir: This issue has resolved ✅.
March 15, 2025 at 1:43 PM, Denkó Jani (F.A.): All error is solved 🫡🫡💪
March 15, 2025 at 2:49 PM, Horváth Adriàn: @Denkó Jani (F.A.) @Boromisza Zoltán nem mén az alapanyag raki 3-4 között. Csekkoljàtok pliiiiz
March 15, 2025 at 2:50 PM, Denkó Jani (F.A.): Oksa

Chunk 62:
March 15, 2025 at 2:52 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check PS22A-2503040064 located at M0CNV023_35_037 it is not moving and blocking materials tranfer. Thank you very much!
March 15, 2025 at 2:56 PM, Boromisza Zoltán: Okey
March 15, 2025 at 5:07 PM, Horváth Adriàn: @Denkó Jani (F.A.) gyere pls a 3as végére. Megàllt féluton a Dunnage kiadàs
March 15, 2025 at 5:11 PM, Mohammad Amir: This message was deleted.
March 15, 2025 at 5:20 PM, Boromisza Zoltán: Kész

Chunk 63:
March 15, 2025 at 5:43 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_83_004 there is Stop Detect Error. Thank you very much!

Chunk 64:
March 15, 2025 at 6:08 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 1 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 65:
March 15, 2025 at 6:17 PM, 김지수PM(Gyuri)_FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.15 Time: 18:00–06:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen
March 15, 2025 at 10:58 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check M0STK012_C01 “Crane W/T in abort (Double cargo)” Thank you.
March 15, 2025 at 10:59 PM, Shahbaz 샤바즈 MCS/RTD: C02*
March 16, 2025 at 12:21 AM, Csepi Árpád: Solved

Chunk 66:
March 16, 2025 at 2:14 AM, Shahbaz 샤바즈 MCS/RTD: @FA There are two alternated jobs from cell buffer to M4MFA300_P02/P04 but P02/P04 are OOS. Is the production stopped? Please confirm. Thanks
March 16, 2025 at 2:15 AM, Csepi Árpád: Yes
March 16, 2025 at 2:16 AM, Csepi Árpád: Production is already up and running, yes!
March 16, 2025 at 2:16 AM, Shahbaz 샤바즈 MCS/RTD: Ok thank you.
March 16, 2025 at 2:47 AM, FA-CS-AGV-Masoud: @FA please check port M3MFA300_P18

Chunk 67:
March 16, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9+2/12 Tech, 0Sl Overtime(2): Nagy Zsolt, Zsurbej Zsolt Holiday(2): Radics András, Boromisza Zoltán Sick(1): Czeilinger Krisztián --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (4): Böröczki Balázs, Takács Ádám, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Takarítás(2): Nagy Zsolt, Zsurbej Zsolt A technikusok elosztása változhat az elvég

Chunk 68:
March 16, 2025 at 6:37 AM, Horváth Adriàn: Sziasztok. 3-4 sor között megfeküdtek az AGVk. Check please.
March 16, 2025 at 6:38 AM, FA CS AGV Jawad: Sure
March 16, 2025 at 6:45 AM, FA CS AGV Jawad: Solved
March 16, 2025 at 8:56 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.16 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 69:
March 16, 2025 at 5:54 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 70:
March 16, 2025 at 7:57 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check M0STK028 “Crane fork right wide error” Thanks
March 16, 2025 at 8:19 PM, Csepi Árpád: Solved
March 16, 2025 at 8:41 PM, Alexandra: 2F cv037 slow detect error
March 16, 2025 at 8:52 PM, Brázik János: Solved

Chunk 71:
March 17, 2025 at 6:10 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 10Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: 1 ———————————— Electrode (3) Simon Attila Marsi Gábor Viczai Tomi ———————————— Assembly(4) Csuti Zoltán Lajos Gábor Nagy Tamás Kertész Dani ———————————— Formation/Modul(4) Döme György Harasztia Zoltán Sarvajcz Ferenc Boromissza Zoltán

Chunk 72:
March 17, 2025 at 8:12 AM, FACS_JaewonShin: 17th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong
March 17, 2025 at 10:08 AM, Szabolcs: @FA Please check M0CNV033 CV031 Conveyor run time over error CV031 Stop detected error Thank you.
March 17, 2025 at 10:10 AM, Boromisza Zoltán: Okey
March 17, 2025 at 10:23 AM, Boromisza Zoltán: Solved

Chunk 73:
March 17, 2025 at 4:34 PM, Döme György F.A: @Mcs Could you please help me? A return order was accidentally issued for port M4MFA300_P22. Could you delete it? Thank you very much!
March 17, 2025 at 4:34 PM, Shakir (MCS): Checking
March 17, 2025 at 4:37 PM, Shakir (MCS): The job has been cancelled ✅ Thank you
March 17, 2025 at 4:37 PM, Döme György F.A: Thank you very much!
March 17, 2025 at 4:38 PM, Shakir (MCS): You’re welcome

Chunk 74:
March 17, 2025 at 5:10 PM, 손병훈: @배병민 (Bae Byoungmin) @연해리 3라인 35번 포트 실물-PLC-핸디 BCR : PS22A-2502240037 RTD/MCS : PS22A-2502240039 로 나옵니다. next lot search에도 39로 올라옵니다 확인 부탁드립니다.
March 17, 2025 at 5:14 PM, FACS_JaewonShin: 현장 방문하여 확인해보겠습니다.
March 17, 2025 at 5:23 PM, Shakir (MCS): @FA Please check M0STK021_C01 there is CRANE FORK Left collapse detect 2 error. Thank you very much!
March 17, 2025 at 5:24 PM, Döme György F.A: Checking
March 17, 2025 at 5:33 PM, Döme György F.A: Solved

Chunk 75:
March 17, 2025 at 5:36 PM, FACS_JaewonShin: @MCS We already upload p35(ps22a-2502240037) P19(ps22a-2502240039) Could you check each port status and their address?
March 17, 2025 at 5:41 PM, Sazzad Bhai SKon: Line 3? P19: there is no UR received
March 17, 2025 at 5:44 PM, Sazzad Bhai SKon: P35 is ready to unload. Please raise UR from P19 and when unload complete, LR again. Material will be moving there
March 17, 2025 at 5:59 PM, FACS_JaewonShin: Please keep check M3MFA300 P19, P35

Chunk 76:
March 17, 2025 at 6:02 PM, FACS_JaewonShin: 수동 대차 이용해서 포트 변경 진행하여 정상으로 포트내 보고가 안된거같습니다. 로딩 요청 까지는 해놨는데 상황 지켜봐야 할거같습니다.
March 17, 2025 at 6:03 PM, 손병훈: UR시 BCR해도 데이터가 다시 씌워지지는 않는건가요?
March 17, 2025 at 6:04 PM, FACS_JaewonShin: Bcr리딩만 되고 상위보고가 이루어지지 않았습니다.

Chunk 77:
March 17, 2025 at 6:17 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:13/13+1 SL Overtime (1): Denkó János Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Denkó János, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 17, 2025 at 9:33 PM, N.Gábor F.A.: @MCS Good evening I am putting the M0STK022 warehouse into manual mode for inspection.

Chunk 78:
March 18, 2025 at 1:39 AM, Nemes Patrik: 2F cv019 redirect stop error
March 18, 2025 at 2:07 AM, N.Gábor F.A.: @Mcs Hello Can you sand back to the storage this carrier? U015950?
March 18, 2025 at 2:09 AM, VK (mcs): Please first cancel current job from ACS, then I will send it back to storage
March 18, 2025 at 2:13 AM, N.Gábor F.A.: Done
March 18, 2025 at 2:14 AM, VK (mcs): Transferred to the STK31
March 18, 2025 at 2:15 AM, N.Gábor F.A.: Thank you
March 18, 2025 at 2:16 AM, VK (mcs): Most welcome

Chunk 79:
March 18, 2025 at 6:10 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.18 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 80:
March 18, 2025 at 6:26 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 1 ———————————— Electrode (3) Skwarek Tibi Marsi Gábor Viczai Tomi ———————————— Assembly 1F(2) Nagy Tamás Kertész Dani ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Simon Attila ———————————— Formation/Modul(4) Döme György Harasztia Zoltán Sarvajcz Ferenc Boromissza Zoltán

Chunk 81:
March 18, 2025 at 8:27 AM, VacziGyula: Sziasztok. 2emeleten Wrapper light curtain detect error
March 18, 2025 at 8:28 AM, Zoltán Harasztia FA: Megyek
March 18, 2025 at 8:40 AM, FACS_JaewonShin: 18th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 3 people - Team leader 1 Shin jaewon - mechanic 1 Son hyeongi - plc control 1 Jin jaejeong
March 18, 2025 at 9:54 AM, VacziGyula: 2emeleten in lift gf stop time over
March 18, 2025 at 9:57 AM, Sarvajcz Ferenc FA: Hamarosan..

Chunk 82:
March 18, 2025 at 10:01 AM, (Unknown): @FA M0STKA024_C01 is OutOfService, having Crane W/T In Abort error. Please check Thank you very much
March 18, 2025 at 10:01 AM, (Unknown): M0STK024_C01*
March 18, 2025 at 10:03 AM, Döme György F.A: Solved
March 18, 2025 at 10:07 AM, Szabolcs: @FA Chech please M0CNV033 - RTV.
March 18, 2025 at 10:10 AM, Zoltán Harasztia FA: Nézzük
March 18, 2025 at 11:10 AM, VacziGyula: 2emeleten Cv021 Stop detect error Rtv carcv ccw run time delay

Chunk 83:
March 18, 2025 at 11:17 AM, Zoltán Harasztia FA: Kész
March 18, 2025 at 11:21 AM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) pm님 모듈 3,4라인 원자재 agv4호기 포트 진입 에러 다수 발생하여 모듈 비가동 시간 많이 발생합니다
March 18, 2025 at 11:26 AM, 배병민 (Bae Byoungmin): 네 해당부분 확인 되었습니다. 우선 AGV 1호기 점검 및 조치가 금주 금요일 최종 완료 예정이며 금요일 1,2,3호기로 운영 하겠습니다. AGV 4호기도 티칭 변경등 진행중으로 현장에서 계속적으로 대응해나가도록 하겠습니다.
March 18, 2025 at 11:31 AM, FACS_JaewonShin: Agv 4번 면밀히 모니터링 하고 AGV 대응인력이 현장에서 각 포트별 재티칭 진행하겠습니다.

Chunk 84:
March 18, 2025 at 2:42 PM, (Unknown): @FA One transport job is Alternated cause M4MFA300_P32 is OutOfService. Please Check Thank you very much
March 18, 2025 at 3:23 PM, VacziGyula: 2 emeleten in lift gf stop time over
March 18, 2025 at 3:24 PM, Döme György F.A: Nézem
March 18, 2025 at 3:25 PM, Döme György F.A: Kész

Chunk 85:
March 18, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13+1 Overtime Overtime (1): Böröcz Tamás Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Nagy Zsolt, Böröcz Tamás 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 19, 2025 at 12:58 AM, N.Gábor F.A.: @Mcs Hello Can you delete the T703263 palette job? And can you create a job for T600066 palette?

Chunk 86:
March 19, 2025 at 12:59 AM, VK (mcs): Checking
March 19, 2025 at 1:03 AM, VK (mcs): T703263 already cancelled job by OP action. For T600066 also cancelled. I will create job for that
March 19, 2025 at 1:16 AM, VK (mcs): Job created for T600066 .
March 19, 2025 at 1:16 AM, N.Gábor F.A.: Thank you
March 19, 2025 at 6:33 AM, FA/CS/AGV/Taimur: @Mohammad Amir Please create the job For AGV: 06 in End product GF, it is holding carrier: U016074. Thank you

Chunk 87:
March 19, 2025 at 6:34 AM, Mohammad Amir: Checking
March 19, 2025 at 6:39 AM, Mohammad Amir: Job has been created successfully ✅. As i checked AGV05(M0MGV031_VC05) has been assigned. Could you please confirm the current location of the carrier U016074 ,is it AGV #5 or AGV#6 ? Thank you very much!
March 19, 2025 at 6:39 AM, FA/CS/AGV/Taimur: FYI: The carrier is loaded on AGV: 06, but the job for this carrier is assigned to AGV: 05. Can you please modify this?

Chunk 88:
March 19, 2025 at 6:39 AM, Mohammad Amir: Okay , thank you very much for the information. Working on it!
March 19, 2025 at 6:41 AM, Mohammad Amir: Location has been updated ✅. Thank you!

Chunk 89:
March 19, 2025 at 6:50 AM, Mohammad Amir: @ACS Please check for carrier U016074 location has been updated successfully to AGV#6(M0MGV031) in MCS/RTD ✅. However i don't see location update in ACS side ,in ACS it still shows AGV#5 as assigned vehicle. Please update it so that this job can be completed. Thank you very much!
March 19, 2025 at 6:56 AM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0CNV031_RTV01 there is Interface error. It is blocking transfers. Thank you very much!

Chunk 90:
March 19, 2025 at 6:56 AM, Denkó Jani (F.A.): @Boromisza Zoltán
March 19, 2025 at 6:58 AM, Gerbovits Kevin: Going
March 19, 2025 at 7:01 AM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please check M0CNV023_RTV03 it is OOS and blocking transfers. Thank you very much!
March 19, 2025 at 7:03 AM, Denkó Jani (F.A.): @Gerbovits Kevin 😂😘

Chunk 91:
March 19, 2025 at 7:04 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9/11 Tech, 1Sl Overtime(0): Holiday(2): Pintye Miklós László, Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Denkó János --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(2): Gerbovits Kevin, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 92:
March 19, 2025 at 7:07 AM, Gerbovits Kevin: Solved
March 19, 2025 at 7:08 AM, Mohammad Amir: Thank you very much!
March 19, 2025 at 7:11 AM, (Unknown): Sziasztok a második emeletre kèrekszèpen karbantartót kifelé a munka anyagok nem jönnek köszönöm
March 19, 2025 at 7:12 AM, (Unknown): Se befele nem megy semi
March 19, 2025 at 7:24 AM, Boromisza Zoltán: Kész
March 19, 2025 at 7:31 AM, (Unknown): Köszönöm szèpen

Chunk 93:
March 19, 2025 at 7:36 AM, Mohammad Amir: This issue has been resolved ✅. Now AGV #6 has started to move. Thank you very much!
March 19, 2025 at 7:42 AM, FA/CS/AGV/Taimur: @ACS PLEASE update the carrier in port: M3MFA300_P05. In ACS it shows carrier: U016107. However, the port is actually occupied with carrier: U016113. It is a data mismatch. AGV:03 is waiting to load U016107 which is incorrect.
March 19, 2025 at 7:43 AM, 김희용 invited 동현.
March 19, 2025 at 7:43 AM, 김희용: .

Chunk 94:
March 19, 2025 at 7:45 AM, Mohammad Amir: This issue has been resolved ✅ . AGV#7 has been assigned to deposit the material to STK031_Z01. Thank you very much!
March 19, 2025 at 7:47 AM, Mohammad Amir: Now current location of U016113 is M3MFA300_P05. And U016107-M0STK031(0101401). Thank you very much!
March 19, 2025 at 7:51 AM, FA/CS/AGV/Taimur: In ACS it is different scenario.
March 19, 2025 at 8:08 AM, Mohammad Amir: @ACS Please check this issue. Thank you very much!

Chunk 95:
March 19, 2025 at 8:11 AM, (Unknown): Második emeleten raktár hátul nem megy be köszi
March 19, 2025 at 8:16 AM, Gerbovits Kevin: Solved
March 19, 2025 at 8:35 AM, 김지형(Jihyung Kim): @배병민 (Bae Byoungmin) Line 1 will be operated from next Monday. We need to receive the material in advance this Friday, so please prepare it.
March 19, 2025 at 8:42 AM, 배병민 (Bae Byoungmin): PM님 차주 월요일부터 1라인 생산이 계속 진행되는것인거죠? 금요일 자재 재공 투입은 문제없게 준비 해놓겠습니다

Chunk 96:
March 19, 2025 at 8:46 AM, 김지형(Jihyung Kim): 일단 차주 일주일간 샘플생산 이후 4월 14일부터 SOP 입니다.
March 19, 2025 at 8:47 AM, 배병민 (Bae Byoungmin): 넵 알겠습니다 감사합니다
March 19, 2025 at 9:11 AM, FACS_JaewonShin: 19th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 3 people - Team leader 1 Shin jaewon - mechanic 1 Lee yeongmin - plc control 1 Jin taehyeong

Chunk 97:
March 19, 2025 at 10:14 AM, Mohammad Amir: @FA @Boromisza Zoltán Please check M4MFA300_P05 is OOS that' s why one job is not getting completed. Thank you very much!
March 19, 2025 at 10:22 AM, 배병민 (Bae Byoungmin): The module discharge unit is in manual mode. The AGV has switched to manual mode while waiting for discharge.
March 19, 2025 at 10:24 AM, 김지형(Jihyung Kim): Line3&4 stopped due to update MES system

Chunk 98:
March 19, 2025 at 10:28 AM, 배병민 (Bae Byoungmin): @FA team When the process of modules 3 and 4 are normalized, please check the AGV and proceed with normalization.
March 19, 2025 at 10:56 AM, 권민석/Kwon Minseok: @김승태 @Choi Inbo/최인보 @배병민 (Bae Byoungmin) pm님 모듈 4라인 로워케이스 자재base id (Ps22a-2502280067)팔레트 입고 안 잡힌 채로 수동 포트 투입됬습니다.원인 파악 좀 부탁드리겠습니다
March 19, 2025 at 10:58 AM, Sazzad Bhai SKon: Hello manager, MCS order is normal. Please make LR from gantry

Chunk 99:
March 19, 2025 at 11:00 AM, Sazzad Bhai SKon: I see gantry ports (P18/19) are occupied. So please first raise UR from gantry. After unloading raise LR from gantry.
March 19, 2025 at 11:06 AM, Mohammad Amir: @FA @Boromisza Zoltán Please can M0STK026_C01 there is Crane fork left collapse detect 4 error. Thank you!
March 19, 2025 at 11:08 AM, Mohammad Amir: This error exists since 10:55. Thank you very much!
March 19, 2025 at 11:16 AM, Boromisza Zoltán: Okey

Chunk 100:
March 19, 2025 at 11:18 AM, 권민석/Kwon Minseok: @mcs Module 4line port 35:ps22a-2502280067 Occupied. Please update
March 19, 2025 at 11:18 AM, Mohammad Amir: Checking
March 19, 2025 at 11:20 AM, Mohammad Amir: Location of PS22A-2502280067 is M4MFA300_P35. ✅ Thank you!
March 19, 2025 at 11:21 AM, 권민석/Kwon Minseok: Thank you
March 19, 2025 at 11:21 AM, Mohammad Amir: You are welcome!
March 19, 2025 at 11:28 AM, Mohammad Amir: @FA @Boromisza Zoltán Please check this error still exists. Thank you!

Chunk 101:
March 19, 2025 at 11:35 AM, Boromisza Zoltán: Okey
March 19, 2025 at 12:22 PM, Hódi Attila: Sziasztok! Segítségre lenne szükség a modul késztermék AGV-nél
March 19, 2025 at 12:23 PM, Duna Don: Checking
March 19, 2025 at 1:29 PM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) pm님 모듈 완제품agv 3호기 완제품 배출 시 자주 에러 발생합니다.
March 19, 2025 at 1:35 PM, 권민석/Kwon Minseok: 배출단에서 AGV사이에 중간에 걸리는 에러 입니다.

Chunk 102:
March 19, 2025 at 1:37 PM, FACS_JaewonShin: 현장에서 확인시 포트에서 AGV로 넘어갈때 높이 단차가 4mm정도 있는것으로 확인됩니다. 해당 문제는 전체 end product라인 포트에 있는것으로 보입니다. 이로인해 언로딩시 주로 알람이 발생합니다
March 19, 2025 at 1:37 PM, FACS_JaewonShin: 포트 몰드부분 높이 조정이 필요해 보입니다
March 19, 2025 at 1:38 PM, 권민석/Kwon Minseok: 저희 기구팀이랑 같이 현장에서 확인좀 가능하실까요??
March 19, 2025 at 1:39 PM, FACS_JaewonShin: 지금EOL라인 AGV 수동전환중이라 2시쯤 참석 가능할까요?
March 19, 2025 at 1:39 PM, FACS_JaewonShin: 저도 참석 하겠습니다.

Chunk 103:
March 19, 2025 at 1:39 PM, 배병민 (Bae Byoungmin): PM님 안녕하세요 안그래도 최근 4라인 모듈 배출단에서 AGV로 반송시 이슈가 간헐적으로 확인되어 금일 현장서 보았는데 배출단 C/V에서 AGV로 넘어오기전 걸림등이 발생되고 있습니다. 아이들 롤러 단차등 확인이 필요해보입니다 AGV 전호기 대상으로 레벨이 조금 안맞는 부분입니다
March 19, 2025 at 1:39 PM, 권민석/Kwon Minseok: 넵!!알겠습니다
March 19, 2025 at 1:42 PM, 권민석/Kwon Minseok: 기구팀이랑 확인 해보겠습니다

Chunk 104:
March 19, 2025 at 1:47 PM, 김지형(Jihyung Kim): 피엠님 이력을 아실지 모르겠으나, 과거 라인 셋업시에 톱텍 자동화와 톱텍 설비 담당자들끼리 얘기하여 AGV에 맞춰 설비간 얼라인 다 맞춰놓은 상태였습니다. 특정 AGV에서 문제가 지속 발생하는거면 agv간 높이 차이가 있는지 확인 부탁드리며 AGV 호기가 알람 발생 빈도수 체크하여 어디가 문제인지 원인 파악 필요해 보입니다.
March 19, 2025 at 1:52 PM, 배병민 (Bae Byoungmin): PM님 현재 AGV는 Level을 조절하는 포인트가 없어서 상시 Level은 동일 한 수준입니다. 제가 조금있다 현장으로 가겠습니다. 한번 같이보시면 AGV 로 오기전 배출 포트에서 화물이 울렁거리면서 이동하는것이 보입니다. 우선 4라인 배출부가 확인되고 있으며 혹시 모듈 배출단 변경점등이 확인이 필요한 부분입니다. 현장가면 연락드리겠습니다.

Chunk 105:
March 19, 2025 at 2:53 PM, Boromisza Zoltán: @FA/CS/AGV/Taimur where are you? we'd put the vacuum cleaner away
March 19, 2025 at 3:14 PM, FA/CS/AGV/Taimur: I’m in EOL line, there are some AGV left, once complete i will bring it to you. Thank you
March 20, 2025 at 12:18 AM, Shahbaz 샤바즈 MCS/RTD: @FA M0CNV032_RTV01 is OOS. Please check Thank you.
March 20, 2025 at 12:25 AM, Csepi Árpád: Please bear with us! We are already on our way.
March 20, 2025 at 12:36 AM, Édl Tamás: Solved

Chunk 106:
March 20, 2025 at 6:08 AM, Horváth Adriàn: @Boromisza Zoltán @Gerbovits Kevin Modul dokkban a jobboldali magasraktàr hibàval àll. Majd nézzetek rà. Köszi.
March 20, 2025 at 6:20 AM, Mohammad Amir: @Boromisza Zoltán Please check M0CNV032_RTV01 there is RTV Car stopper down error time delay. It is blocking few jobs. Thank you!
March 20, 2025 at 6:21 AM, Mohammad Amir: @Gerbovits Kevin Please check M0CNV023_P44 there is light curtain error. Thank you!

Chunk 107:
March 20, 2025 at 6:22 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 1Sl Overtime(0): Holiday(1): Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Pintye Miklós László --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Gerbovits Kevin, Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 108:
March 20, 2025 at 6:31 AM, Boromisza Zoltán: Okey
March 20, 2025 at 6:40 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check this error still exists. Thank you!
March 20, 2025 at 6:50 AM, Denkó Jani (F.A.): Solved
March 20, 2025 at 6:51 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 6:51 AM, Boromisza Zoltán: Solved
March 20, 2025 at 6:52 AM, Mohammad Amir: Thank you very much!

Chunk 109:
March 20, 2025 at 6:56 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_35_028 there is Wrapper Heater temp alarm. Thank you!
March 20, 2025 at 6:56 AM, Boromisza Zoltán: Solved
March 20, 2025 at 6:57 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 7:29 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_RTV02 there rtv car stopper down error time delay,it is blocking transfers. Thank you!
March 20, 2025 at 7:38 AM, (Unknown): Sziasztok 2.e hátsó raktár

Chunk 110:
March 20, 2025 at 7:39 AM, Denkó Jani (F.A.): Már kész
March 20, 2025 at 7:39 AM, Denkó Jani (F.A.): Solved
March 20, 2025 at 7:39 AM, Mohammad Amir: Thank you very much
March 20, 2025 at 7:47 AM, FACS_JaewonShin: 20th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong

Chunk 111:
March 20, 2025 at 9:28 AM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) @FACS_JaewonShin pm님 모듈 3 4라인 자재 배출 포트에서 agv2호기 진입 에러발생 했습니다
March 20, 2025 at 9:29 AM, 권민석/Kwon Minseok: 진입시 한쪽으로 치우쳐 진입해 에러발생한 상황입니다.
March 20, 2025 at 9:30 AM, (Unknown): Sziasztok hátul a raktárba nem megy semi be se ki a második emeleten

Chunk 112:
March 20, 2025 at 9:32 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0VNV023_BP04 there is a carrier and it is not moving and causing other carriers to wait.PS230-2503130134. Thank you very much!
March 20, 2025 at 9:34 AM, 권민석/Kwon Minseok: 진입에러x,팔레트 옆 이물질이 끼어 에러발생했습니다
March 20, 2025 at 9:34 AM, Mohammad Amir: From MCS/RTD side everything is good. ✅

Chunk 113:
March 20, 2025 at 9:36 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check as well BP02 there is W000111 it is also not moving for while. Thank you!
March 20, 2025 at 9:39 AM, Denkó Jani (F.A.): Áll moving ,solved
March 20, 2025 at 9:40 AM, Mohammad Amir: Materials transfer has been normalised ✅. Thank you very much!
March 20, 2025 at 10:31 AM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0STK026_C01 there is CRANE FORK Left collapse detect 2 error. Thank you!

Chunk 114:
March 20, 2025 at 10:34 AM, Boromisza Zoltán: Okey
March 20, 2025 at 10:42 AM, Boromisza Zoltán: Solved
March 20, 2025 at 10:43 AM, Mohammad Amir: @Boromisza Zoltán Please check M0CNV023_RTV01 ther is RTV Car distance sensor time delay error. Thank you!
March 20, 2025 at 10:43 AM, Mohammad Amir: Thank you!
March 20, 2025 at 10:44 AM, Boromisza Zoltán: Okey
March 20, 2025 at 10:45 AM, Mohammad Amir: M0CNV032***
March 20, 2025 at 10:45 AM, Mohammad Amir: It is CNV 32_RTV01. Thank you!

Chunk 115:
March 20, 2025 at 10:45 AM, Denkó Jani (F.A.): the RTV is currently in the installation process, there are no errors
March 20, 2025 at 10:45 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 11:10 AM, (Unknown): 2 e hátul raktár nem megy az anyag
March 20, 2025 at 2:02 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_P43 there is light curtain Error. Thank you!
March 20, 2025 at 2:11 PM, Denkó Jani (F.A.): Clear
March 20, 2025 at 2:11 PM, Mohammad Amir: Thank you very much!

Chunk 116:
March 20, 2025 at 2:34 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check PS22A-2503070033 is located at M0CNV023_35_038 is not moving for a while and blocking materials delivery. Thank you very much!
March 20, 2025 at 2:52 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_P43 there is light curtain Error. Thank you!
March 20, 2025 at 2:53 PM, Denkó Jani (F.A.): All solved
March 20, 2025 at 2:53 PM, Mohammad Amir: Thank you very much!

Chunk 117:
March 20, 2025 at 4:09 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0STK025_C01 there is Double Storage issue. Thank you!
March 20, 2025 at 4:11 PM, Mohammad Amir: Double Cargo*
March 20, 2025 at 4:16 PM, Mohammad Amir: @Boromisza Zoltán Please check this ,this error still exists. Thank you!
March 20, 2025 at 4:22 PM, Denkó Jani (F.A.): Solved
March 20, 2025 at 4:22 PM, Denkó Jani (F.A.): Solved
March 20, 2025 at 4:23 PM, Mohammad Amir: Thank you very much!

Chunk 118:
March 20, 2025 at 5:26 PM, Mohammad Amir: @Denkó Jani (F.A.) Please check M0CNV023_RTV01 there is Car C/V limit det sensor delay. Thank you very much!
March 20, 2025 at 5:45 PM, Denkó Jani (F.A.): Solvedka 🤗
March 20, 2025 at 5:46 PM, Mohammad Amir: Thank you very much!

Chunk 119:
March 20, 2025 at 6:11 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás

Chunk 120:
March 20, 2025 at 6:26 PM, Alexandra: 2.emeleten CV040 megállt a raklap
March 20, 2025 at 6:43 PM, Csepi Árpád: Solved
March 20, 2025 at 7:56 PM, Alexandra: Ugyanez a hiba újra.
March 20, 2025 at 8:12 PM, Édl Tamás: Solved

Chunk 121:
March 21, 2025 at 6:17 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 1 Szabadságon: 1 Helyettesítés: 0 ———————————— Electrode (3) Skwarek Tibi Simon Attila Viczai Tomi ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Kertész Dani ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Gégény Dávid ———————————— Formation/Modul(2) Döme György Harasztia Zoltán
March 21, 2025 at 6:24 AM, 권민석/Kwon Minseok: Module 4-line material ports 20-27 power down.

Chunk 122:
March 21, 2025 at 6:26 AM, 권민석/Kwon Minseok: @fa Please support this
March 21, 2025 at 6:27 AM, Shakir (MCS): @FA Please check M0CNV023_RTV01 there is RTV carstopper, Down error time delay. Some jobs are getting delayed. Thank you
March 21, 2025 at 6:31 AM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) pm님 지금 모듈 4라인 원자재 포트20~27번 포트 전원 차단 됬는데,확인좀 가능 하실까요??
March 21, 2025 at 6:43 AM, 배병민 (Bae Byoungmin): @FA Technician There is a local box that manages the port. Open it and check if the MC is down.

Chunk 123:
March 21, 2025 at 6:52 AM, 배병민 (Bae Byoungmin): PM님 조치가 늦어지면 우선 수동 투입으로라도 가능하실까요? 최대한 빨리가서 조치해드리겠습니다.
March 21, 2025 at 6:53 AM, 권민석/Kwon Minseok: 네 수동투입중입니다
March 21, 2025 at 6:55 AM, 배병민 (Bae Byoungmin): 네 감사합니다.
March 21, 2025 at 7:01 AM, Döme György F.A: Solved

Chunk 124:
March 21, 2025 at 8:44 AM, 배병민 (Bae Byoungmin): @김지형(Jihyung Kim) @권민석/Kwon Minseok 해당 이슈 내용 공유드립니다. Main 판넬 UPS 에러로 인한 PLC 전원 Off 되어 동작 불가 상황이였으며, 조치후 재기동 되었습니다. 생산에 불편을 드려 죄송합니다. 1. 공정 : 모듈 4라인 MCP#1 2. 현상 : Main PLC 전원 Off 발생 3. 원인 : UPS error 발생으로 전원 공급 오류 발생 4. 조치 : UPS 에러 조치 후 재기동 5. Down time : 6:20 ~ 8:30

Chunk 125:
March 21, 2025 at 8:46 AM, FACS_JaewonShin: 21st march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong
March 21, 2025 at 8:48 AM, VacziGyula: Sziasztok! 2emeleten in lift gf stop time over
March 21, 2025 at 8:50 AM, Döme György F.A: Kész
March 21, 2025 at 9:09 AM, 김지형(Jihyung Kim): @FA team Please turn on AGV between line1-2

Chunk 126:
March 21, 2025 at 9:10 AM, FA/CS/AGV/Taimur: Sure. Working on it.
March 21, 2025 at 9:51 AM, 김지형(Jihyung Kim): @윤경환 2F 언랩핑 1라인쪽 파렛트 걸려있습니다 처리부탁드립니다
March 21, 2025 at 9:52 AM, 윤경환: 네 확인하고 처리 하겠습니다. 잠시만 기다려주세요.
March 21, 2025 at 9:53 AM, 김지형(Jihyung Kim): 지금 내려오고있는거 확인됐습니다!
March 21, 2025 at 9:55 AM, 김지형(Jihyung Kim): 내려오고있는 자재 밴딩 안풀려져서왔고 랩핑도 안풀어서 내려 왔습니다

Chunk 127:
March 21, 2025 at 10:02 AM, 김지형(Jihyung Kim): @RTD 1라인 회수된 자재가 아닌 신규 자재로 내려오는 이유 확인부탁드립니다 회수 Pallet ID PS230-2412020071 PS230-2412020072 PS230-2412020073 실제 내려온 Pallet PS230-2412090031
March 21, 2025 at 10:02 AM, SKOH2/제조-셀,모듈 출하/김병호: @배병민 (Bae Byoungmin) @FACS_JaewonShin U016107 U016106 U016075 U016113 U016112 U016108 해당 제품이 현재 WMS상에 적치 정보가 정확치 않으며, RTD,MCS상에서 검색이 되지 않습니다. 반송 기록도 검색되지 않아 확인 부탁드리며, WMS,RTD상에서 배출 작업도 진행 못하고 있어서 확인 부탁드립니다. SCS상에서는 검색되어 현재 자동화 창고31뱅크에 입고 되어있어 확인 부탁드립니다.

Chunk 128:
March 21, 2025 at 10:08 AM, 배병민 (Bae Byoungmin): @Shakir (MCS) Module 1 Line Raw Materials 18,19 Ports are not generated. Please check.
March 21, 2025 at 10:08 AM, Shakir (MCS): Checking
March 21, 2025 at 10:10 AM, 김지형(Jihyung Kim): @RTD BMA 뿐만아니라 다른자재도 리콜자재가 안내려오고 있습니다
March 21, 2025 at 10:10 AM, Shakir (MCS): Hello Sir LR received but there is no Lot available
March 21, 2025 at 10:10 AM, 윤경환: 모듈 2F 1라인 언랩핑 누가 바이 패스 걸어 놓으신거 같은데 담당자분이 누구실까요?

Chunk 129:
March 21, 2025 at 10:11 AM, FACS_JaewonShin: 배병민 pm님이 2층 확인하러 올라가셨습니다
March 21, 2025 at 10:13 AM, Shakir (MCS): LR received only for the Port 18 at 09:47
March 21, 2025 at 10:15 AM, Shakir (MCS): But the port 19, we don’t receive any LR. Thank you
March 21, 2025 at 10:16 AM, 권민석/Kwon Minseok: This message was deleted.
March 21, 2025 at 10:17 AM, 권민석/Kwon Minseok: There were no materials in the warehouse.

Chunk 130:
March 21, 2025 at 10:17 AM, 김지형(Jihyung Kim): @(Unknown) @Mohammad Amir @Sazzad Bhai SKon @Shahbaz 샤바즈 MCS/RTD @VK (mcs) Are you guys checking?
March 21, 2025 at 10:18 AM, Sazzad Bhai SKon: We're checking
March 21, 2025 at 10:21 AM, Sazzad Bhai SKon: These pallets are not registered in MCS/RTD
March 21, 2025 at 10:22 AM, 김지형(Jihyung Kim): But we can see on MES that pallets @최용회 @양원석 MES에 보이는데 rtd쪽에 안보이는 이유 확인 부탁드립니다. 자재상태 recall입니다.

Chunk 131:
March 21, 2025 at 10:23 AM, Sazzad Bhai SKon: And for PS230-2412090031: we don't received any UR, so this pallet is not moving to gantry
March 21, 2025 at 10:24 AM, 배병민 (Bae Byoungmin): @FACS_JaewonShin 팀장님 한분 2F에서 랩핑 1라인 재공뺄때 모니터링 부탁합니다.
March 21, 2025 at 10:24 AM, FACS_JaewonShin: 알겠습니다
March 21, 2025 at 10:24 AM, Sazzad Bhai SKon: Please first raise UR from P28 and then raise LR from gantry (P27/26) . Pallet will move

Chunk 132:
March 21, 2025 at 10:24 AM, 김지형(Jihyung Kim): That pallet is arriving at the line
March 21, 2025 at 10:25 AM, 김지형(Jihyung Kim): M1MFA300_P28
March 21, 2025 at 10:26 AM, Sazzad Bhai SKon: Yes PS230-2412090031 is on P28 now. And waiting for UR from 28.
March 21, 2025 at 10:31 AM, Sazzad Bhai SKon: U016107 carrier was deleted on 19th March 8:17 am. User: so22978
March 21, 2025 at 10:36 AM, 양원석: @sazzard reconcile 31 stocker
March 21, 2025 at 10:36 AM, Sazzad Bhai SKon: Doing it now

Chunk 133:
March 21, 2025 at 10:41 AM, Sazzad Bhai SKon: Reconciliation done
March 21, 2025 at 10:45 AM, Sazzad Bhai SKon: After reconciliation only U016107 and U016113 data was updated
March 21, 2025 at 10:52 AM, SKOH2/제조-셀,모듈 출하/김병호: Thank you for checking!
March 21, 2025 at 10:53 AM, Shakir (MCS): U016106 U016075 U016112 U016108 This carrier still not updated after reconciliation of stk31. Thank you
March 21, 2025 at 10:58 AM, 김지형(Jihyung Kim): @FA Please move cell loading AGV #5,10 Is blocked line1

Chunk 134:
March 21, 2025 at 10:59 AM, FA/CS/AGV/Taimur: Sure. Coming.
March 21, 2025 at 11:00 AM, SKOH2/제조-셀,모듈 출하/김병호: This message was deleted.
March 21, 2025 at 11:00 AM, SKOH2/제조-셀,모듈 출하/김병호: I think it will be fine because the pair plt has been updated normally on WMS.
March 21, 2025 at 11:02 AM, 권민석/Kwon Minseok: @FACS_JaewonShin 팀장님 agv14호기 조치 되시면 해당사항 공유 부탁드리겠습니다
March 21, 2025 at 11:16 AM, FACS_JaewonShin: 알겠습니다

Chunk 135:
March 21, 2025 at 11:17 AM, FA/CS/AGV/Taimur: @ACS @FACS_JaewonShin Hi, can you please unblock the links and ports for Module Line 1? Thanks
March 21, 2025 at 11:32 AM, FACS_JaewonShin: 오늘 도킹 모니터링 및 플레이백 재확인후 티칭 필요시 티칭후 모니터링 끝나면 이방에 공유 드리겠습니다.
March 21, 2025 at 11:33 AM, 권민석/Kwon Minseok: 네 감사합니다
March 21, 2025 at 11:56 AM, Shakir (MCS): @FA U016397 carrier job is alternated because the destination M1MFA300_P06 is OOS. Please check Thank you

Chunk 136:
March 21, 2025 at 11:58 AM, Zoltán Harasztia FA: He cannot load the material because the line is currently stopped, and there is still material at the port.
March 21, 2025 at 11:58 AM, Shakir (MCS): Thank for the information
March 21, 2025 at 1:27 PM, Shakir (MCS): @FA Please check M0CNV023_RTV01 there is Car work data error. Thank you
March 21, 2025 at 1:34 PM, Zoltán Harasztia FA: Solved

Chunk 137:
March 21, 2025 at 2:01 PM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) @FACS_JaewonShin pm님 모듈 1라인 18번 투입 포트 자재 가이드 안에 놓지 못해 삐뚤하게 투입되었습니다.해당 포트 점검 부탁드립니다:현장 보존 상태입니다 agv2호기
March 21, 2025 at 2:03 PM, Shakir (MCS): @FA Please check M0CNV023_RTV01 there is C/V limit DET sensor delay Thank you
March 21, 2025 at 2:04 PM, Hmyang(Hungary): @Duna Don can you pls check this? Thx
March 21, 2025 at 2:04 PM, 배병민 (Bae Byoungmin): 네 알겠습니다
March 21, 2025 at 2:05 PM, Duna Don: Sure we will check it now, Thanks

Chunk 138:
March 21, 2025 at 2:07 PM, 배병민 (Bae Byoungmin): @FACS_JaewonShin 팀장님 같이 확인 부탁드릴께요
March 21, 2025 at 2:16 PM, FACS_JaewonShin: 현장 가겠습니다.
March 21, 2025 at 2:58 PM, 최용회: rtd 양강주 부장님께 문의한 결과 rtd쪽 캐리어 정보가 삭제되어 반송잡을 생성할수 없다고 공유 받았습니다 mes에서제공하는 뷰에는 정상 조회됩니다
March 21, 2025 at 3:16 PM, FACS_JaewonShin: 1차로 현장에서 확인 후 정위치 하였습니다. 2번 agv가 포트에서 가져올때 좌측으로 편향되어 가져오는거 같습니다. 월요일날 샘플생산시 재확인후 추가조정 하겠습니다.
March 21, 2025 at 3:26 PM, Shakir (MCS): @FA Please check M0CNV023_RTV01 there is Car work data error. Thank you

Chunk 139:
March 21, 2025 at 3:56 PM, Shakir (MCS): @FA Please check M0STK025 “Crane fork left wide error. Thanks
March 21, 2025 at 5:16 PM, 김승태 left this chatroom.

Chunk 140:
March 21, 2025 at 6:22 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:10/13+2 Overtime Overtime (1): Pálosi Róbert, Csanálosi Gábor Sick (0):- Holiday (2): Magyar Balázs, Oláh András Shift change(1): Novák Zoltán Elektróda:(3) Szabadi Miklós, Kiss Balázs, Pálosi Róbert Assembly(6): GF: Novák Zoltán, Béki Norbert, Csanálosi Gábor 1F: Zsurbej Zsolt, Nagy Zsolt, Kasztel Balázs Modul(2): Martina Dávid, Nagy Gábor

Chunk 141:
March 21, 2025 at 6:37 PM, VK (mcs): @FA Is there any production for first line module assembly? There is job to M1MFA300-port 6 , but job alternated! Thx
March 21, 2025 at 6:41 PM, N.Gábor F.A.: Checking
March 21, 2025 at 6:42 PM, N.Gábor F.A.: No production today on line 1
March 21, 2025 at 6:42 PM, VK (mcs): Thank you
March 21, 2025 at 6:50 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 142:
March 21, 2025 at 8:55 PM, VK (mcs): @FA Please check 2F M0CNV 023 (83016) Stop detect error!
March 21, 2025 at 8:56 PM, N.Gábor F.A.: Checking

Chunk 143:
March 22, 2025 at 6:19 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 10 Tech, 1 SL Beteg: 1 Szabadságon: 2 Helyettesítés: 0 ———————————— Electrode (2) Marsi Gábor Viczai Tomi ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Kertész Dani ———————————— Assembly GF(3) Simon Attila Lajos Gábor Gégény Dávid ———————————— Formation/Modul(2) Csuti Zoltán Döme György

Chunk 144:
March 22, 2025 at 8:00 AM, Shakir (MCS): @FA Please check M0CNV023_RTV01 there is RTV carstopper, Down error time delay. Some jobs are getting delayed. Thank you
March 22, 2025 at 8:01 AM, Döme György F.A: Yes, we are here. We are trying to solve the problem.
March 22, 2025 at 8:01 AM, Shakir (MCS): Thank you
March 22, 2025 at 9:00 AM, VacziGyula: Sziasztok! 2emeleten cv 40 other party is not respomdimg

Chunk 145:
March 22, 2025 at 9:36 AM, Shakir (MCS): @FA Please check M0CNV022_M03 there is Stop Detect Error. Thank you very much!
March 22, 2025 at 10:22 AM, FA CS AGV Jawad: Can some one plz check ST011-0P 02..there is alarm. Carrier data receive time out
March 22, 2025 at 11:50 AM, VacziGyula: 2 emeleten cv 41 work data error & interface error
March 22, 2025 at 1:22 PM, VacziGyula: 2 emeleten cv 29 stop detect error & home run time over error

Chunk 146:
March 22, 2025 at 1:26 PM, Shakir (MCS): @FA Please check M0CNV023_35_29 Home run time error. Thank you
March 22, 2025 at 4:19 PM, Shakir (MCS): @FA @Döme György F.A Please check M0CNV023_RTV01 RTV car position sensor not detect. Thank you
March 22, 2025 at 4:32 PM, Döme György F.A: Solved
March 22, 2025 at 6:00 PM, Szabo Ede Sandor: Sziasztok az OQC porton maradt 3 paletta azt ne küldjétek vissza légyszives mert reggel szükségünk van rá. Köszönöm.

Chunk 147:
March 22, 2025 at 6:07 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Hufnágel Dániel Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs
March 22, 2025 at 6:34 PM, VK (mcs): @FA Please check 2F conveyor M0CNV023 (83010) Stop detect error!

Chunk 148:
March 22, 2025 at 6:37 PM, N.Gábor F.A.: Checking
March 22, 2025 at 8:33 PM, VK (mcs): @FA Please check 2F conveyor M0CNV023 RTV1 RTV car position sensor not detect!
March 22, 2025 at 8:33 PM, N.Gábor F.A.: Checking
March 22, 2025 at 9:34 PM, VK (mcs): @FA Please check 1F M0CN 034 is OoS! Carrier is waiting
March 23, 2025 at 1:20 AM, VK (mcs): @FA Please check 2F M0STK023 Crane fork right collapse detect 3
March 23, 2025 at 1:22 AM, N.Gábor F.A.: Checking

Chunk 149:
March 23, 2025 at 6:04 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Viczai Tomi ———————————— Assembly 1F(4) Fabricius Gergő Nagy Tamás Gégény Dávid Simon Attila ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoli

Chunk 150:
March 23, 2025 at 6:12 AM, Mohammad Amir: @Zoltán Harasztia FA Please check M0CNV023_35_014 there is inverter not ready CW/CCW Error. Thank you very much!
March 23, 2025 at 6:26 AM, Mohammad Amir: @FA This error still exists. Thank you very much!
March 23, 2025 at 6:32 AM, Zoltán Harasztia FA: We're almost there.
March 23, 2025 at 6:32 AM, Mohammad Amir: Thank you very much!
March 23, 2025 at 6:58 AM, Döme György F.A: Solved
March 23, 2025 at 6:58 AM, Mohammad Amir: Thank you very much!

Chunk 151:
March 23, 2025 at 6:59 AM, Döme György F.A: welcome
March 23, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.23 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 23, 2025 at 7:24 AM, Mohammad Amir: @Zoltán Harasztia FA Please check M0CNV023_35_014 there is inverter not ready CW/CCW Error again came. Thank you very much!
March 23, 2025 at 7:27 AM, Döme György F.A: Yes. That's where I'm heading.

Chunk 152:
March 23, 2025 at 7:27 AM, Mohammad Amir: Thank you very much!
March 23, 2025 at 7:36 AM, Döme György F.A: I eliminated the error. I didn’t switch it back to automatic because materials are not moving on the first floor.
March 23, 2025 at 7:36 AM, Mohammad Amir: Alright, Thank you very much!
March 23, 2025 at 12:36 PM, Mohammad Amir: @Döme György F.A Please check M0CNV023_LF22 there is Conveyor Det Error. Thank you!
March 23, 2025 at 12:40 PM, Zoltán Harasztia FA: Solved

Chunk 153:
March 23, 2025 at 12:41 PM, Mohammad Amir: Thank you very much!
March 23, 2025 at 5:17 PM, VacziGyula: Sziasztok! 2emeleten in lift gf stop time over

Chunk 154:
March 23, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (1):Csanálosi Gábor Sick (0):- Holiday (2):Kiss Balázs , Zsurbej Zsolt Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Hufnágel Dániel Assembly(6): GF: Novák Zoltán, Csanálosi Gábor, Béki Norbert 1F: Kasztel Balázs, Novák Károly, Nagy Zsolt Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs

Chunk 155:
March 23, 2025 at 8:07 PM, N.Gábor F.A.: @MCS Hello Could you check me why is Queued this 2 Job? Carrier Names S100479 S100480
March 23, 2025 at 8:17 PM, Shahbaz 샤바즈 MCS/RTD: Hello, I don’t see any issue in MCS/RTD. MCS has already sent the transfer command to SCS, and the reply is also okay. However, I don’t have access to SCS, so I am not sure what the issue is on the SCS side.
March 23, 2025 at 8:17 PM, N.Gábor F.A.: This message was deleted.

Chunk 156:
March 23, 2025 at 8:39 PM, N.Gábor F.A.: @MCS We take out the M0STK028 for PM 10-15 minutes
March 24, 2025 at 8:02 AM, FACS_JaewonShin: 24th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 24, 2025 at 8:25 AM, 박태영: From today, any changes to RTD and MCS related logic cannot be made without Park Taeyoung PM's approval.

Chunk 157:
March 24, 2025 at 9:01 AM, Mohammad Amir: @FA @Csepi Árpád Please check Carrier located at M0CNV023_82_019 it is not moving and blocking other carriers. Thank you!
March 24, 2025 at 9:04 AM, 권민석/Kwon Minseok: @FACS_JaewonShin @배병민 (Bae Byoungmin) pm님 1라인 연습생산 중인데 원자재agv 방전 된거 같습니다.확인좀 부탁드립니다
March 24, 2025 at 9:06 AM, 권민석/Kwon Minseok: 1라인 생산 중이라 긴급 확인좀 부탁드립니다
March 24, 2025 at 9:06 AM, 배병민 (Bae Byoungmin): 네 지금 갈께요

Chunk 158:
March 24, 2025 at 9:06 AM, FACS_JaewonShin: @FA AGV Please go to module line 1 It is argent.
March 24, 2025 at 9:07 AM, Duna Don: Checking, Thanks
March 24, 2025 at 9:09 AM, Csepi Árpád: Solved
March 24, 2025 at 9:10 AM, Mohammad Amir: Thank you very much!
March 24, 2025 at 9:10 AM, Csepi Árpád: You’re welcome!
March 24, 2025 at 9:23 AM, 배병민 (Bae Byoungmin): 죄송합니다. AGV 3대가 모두 방전되어 있습니다. 수동 충전으로 바로 복구 해드리겠습니다
March 24, 2025 at 9:24 AM, 권민석/Kwon Minseok: 네 알겠습니다

Chunk 159:
March 24, 2025 at 9:27 AM, Hmyang(Hungary): Noted well. Thx
March 24, 2025 at 9:42 AM, Mohammad Amir: @Csepi Árpád Please check M0STKC33_C01 there is MCP SMC#1 Disconnected Error ,jobs are pending because of this issue. Thank you very much!
March 24, 2025 at 9:55 AM, 김지형(Jihyung Kim): @배병민 (Bae Byoungmin) 1라인 lwr case 갠트리가 자동을놔도 움직이지 않습니다
March 24, 2025 at 9:55 AM, 배병민 (Bae Byoungmin): 네 바로 가겠습니다
March 24, 2025 at 9:57 AM, Csepi Árpád: Solved

Chunk 160:
March 24, 2025 at 9:57 AM, Mohammad Amir: Thank you very much!
March 24, 2025 at 10:02 AM, Mohammad Amir: @Csepi Árpád Please check M0CNV023_P21 is OOS and it is blocking other carriers. Thank you very much!
March 24, 2025 at 10:16 AM, Csepi Árpád: The gate is now operating in automatic mode!
March 24, 2025 at 10:16 AM, Mohammad Amir: Thank you very much!

Chunk 161:
March 24, 2025 at 11:04 AM, Mohammad Amir: @Csepi Árpád Please check M0STK022_C01 there is CRANE FORK RIGHT wide #2 check error. Several jobs are Alternated. Thank you very much!
March 24, 2025 at 11:40 AM, Mohammad Amir: @Csepi Árpád Please check M0CNV034_RTV01 there is inv-004 not ready error and because of it two jobs are Alternated. Thank you very much!
March 24, 2025 at 11:45 AM, Mohammad Amir: @Brázik János Please check this issue several jobs are Alternated. Thank you very much!

Chunk 162:
March 24, 2025 at 11:57 AM, Alexandra: 2f gf stop time over, floor in position error
March 24, 2025 at 12:00 PM, Csepi Árpád: Solved
March 24, 2025 at 12:04 PM, Mohammad Amir: @FA @Brázik János This error still exists and it causing several jobs to delay. Thank you!
March 24, 2025 at 12:08 PM, Alexandra: 2f cv036 stop detect error, conveyor error
March 24, 2025 at 12:15 PM, Csepi Árpád: Solved
March 24, 2025 at 12:18 PM, Brázik János: Cv007 Ligt Curtain Error MC01,MC02 ONTrolley AC Power. Solved

Chunk 163:
March 24, 2025 at 12:20 PM, Alexandra: 2.emeleten a hátsó fóliázónál esik le a hőfok
March 24, 2025 at 12:41 PM, Mohammad Amir: @Csepi Árpád Please check M1MFA300_P06 it is OOS that's why job for U016859 is alternated. Thank you!
March 24, 2025 at 12:48 PM, Mohammad Amir: @Brázik János @FA Please check this issue ,there is request to receive material for line 1. Thank you!
March 24, 2025 at 12:49 PM, Mohammad Amir: @Csepi Árpád This error also exists, please check! Thank you very much!

Chunk 164:
March 24, 2025 at 1:05 PM, 권민석/Kwon Minseok: @배병민 (Bae Byoungmin) @FACS_JaewonShin pm님 1라인 공더니지 공급이 되지 않아 라인 비가동 상태입니다. 지원 부탁드립니다
March 24, 2025 at 1:07 PM, Mohammad Amir: @FA @Csepi Árpád Please check this issue materials is not teaching M1MFA300_P06. Thank you very much!
March 24, 2025 at 1:07 PM, Mohammad Amir: Reaching ***
March 24, 2025 at 1:13 PM, 배병민 (Bae Byoungmin): 네 확인 해보겠습니다
March 24, 2025 at 1:51 PM, 배병민 (Bae Byoungmin): 모듈 1라인 공급 Port Inservice 되어 공더니지 반송중입니다

Chunk 165:
March 24, 2025 at 2:05 PM, Mohammad Amir: @Csepi Árpád @FA This error still exists several jobs are pending. Thank you!
March 24, 2025 at 2:30 PM, 병현 Mun: @fa M1MFA300_P33 확인부탁드립니다 Agv티칭이 필요해보입니다
March 24, 2025 at 3:49 PM, Maczó Anikó: 2F cv 026 conveyor error, cv027 stop detect error
March 24, 2025 at 4:08 PM, Mohammad Amir: @Csepi Árpád Please check M0STK023_C01 there is CRANE FORK Left collapse detect 1 error. Thank you very much!
March 24, 2025 at 4:22 PM, Brázik János: Solved

Chunk 166:
March 24, 2025 at 4:23 PM, Mohammad Amir: Thank you very much!

Chunk 167:
March 24, 2025 at 6:22 PM, Szücs Géza FT-B: Jó estét! Good morning! "B" műszak, 8+3/11(+1) Tech, 1Sl Overtime(3): Novák Zoltán, Novák Károly, Béki Norbert Holiday(3+1): Czeilinger Krisztián, Gerbovits Kevin, Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Novák Zoltán, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Pintye Miklós László, Béki Norbert --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János ----

Chunk 168:
March 24, 2025 at 6:41 PM, Horváth Adriàn: @Boromisza Zoltán @Denkó Jani (F.A.) 1es sor 3as port fénykapu hiba miatt nem teszi a dolgàt. Nézzétek meg pls. Köszi.
March 24, 2025 at 7:24 PM, (Unknown): Sziasztok 2 e hátsó gépen az anyag se ki se be nem megy!
March 24, 2025 at 7:27 PM, Denkó Jani (F.A.): Megyünk
March 24, 2025 at 9:39 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check M0STK033_C01 there is “MCP GF OP2 light curtain detected error.” Please check.

Chunk 169:
March 24, 2025 at 10:17 PM, Boromisza Zoltán: Solved
March 25, 2025 at 3:54 AM, Kovács Kármen: @Denkó Jani (F.A.) @Boromisza Zoltán tudnátok jönni segíteni a 4esre? Köszi
March 25, 2025 at 4:05 AM, Denkó Jani (F.A.): Solved

Chunk 170:
March 25, 2025 at 6:08 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 171:
March 25, 2025 at 7:59 AM, FACS_JaewonShin: 25th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 25, 2025 at 9:57 AM, Mohammad Amir: @FA @Csepi Árpád Please check M0STK032_C01 there is CRANE STK action 5 minutes time over . Several jobs are Alternated. Thank you!
March 25, 2025 at 10:00 AM, Csepi Árpád: Solved

Chunk 172:
March 25, 2025 at 10:01 AM, Mohammad Amir: Thank you very much!
March 25, 2025 at 10:03 AM, Csepi Árpád: You’re welcome
March 25, 2025 at 10:23 AM, SKOH2/제조-셀,모듈 출하/김병호 invited Farkas Misi.
March 25, 2025 at 10:28 AM, Mohammad Amir: @Brázik János Please check F0BPM012_P03 is OOS that's why one job is alternated. Thank you very much!
March 25, 2025 at 10:29 AM, 김지형(Jihyung Kim) invited 유주환(Yoo Joohwan).

Chunk 173:
March 25, 2025 at 11:10 AM, Maczó Anikó: Sziasztok 2. emeleten a hátsó résznél meg állt az anyag a foliázó után
March 25, 2025 at 11:33 AM, Csepi Árpád: Solved
March 25, 2025 at 1:19 PM, Tóth Gyula: MOCNV036 M02 Megállt a cella kiadás, kèrlek nèzzetek rá! Köszönöm szépen.
March 25, 2025 at 1:21 PM, Mohammad Amir: @FA @Csepi Árpád Please check M0CNV036_LF02 it is OOS and it is blocking transfer destined to CNV036_M02. Thank you very much!
March 25, 2025 at 1:33 PM, Csepi Árpád: Solved

Chunk 174:
March 25, 2025 at 1:33 PM, Mohammad Amir: Thank you very much!
March 25, 2025 at 1:44 PM, 배병민 (Bae Byoungmin): @권민석/Kwon Minseok PM님 모듈 1라아 앞 자제가 놓여있어 AGV 이동시 문제가 되고있습니다. 확인 부탁드립니다
March 25, 2025 at 1:45 PM, 권민석/Kwon Minseok: 금일 1라인 잡체인지 중이라 생산없는데 치워야할까요??
March 25, 2025 at 1:48 PM, Hmyang(Hungary): Agv 회전시 문제되고 있습니다
March 25, 2025 at 1:49 PM, 배병민 (Bae Byoungmin): 네 충전기쪽이라 장애물로 인식되어 충전이 불가하면 방전되는 부분입니다
March 25, 2025 at 1:50 PM, 권민석/Kwon Minseok: 네 이동시키겠습니다

Chunk 175:
March 25, 2025 at 1:50 PM, 배병민 (Bae Byoungmin): 감사합니다.
March 25, 2025 at 2:42 PM, 병현 Mun: M1MFA300_P31 라이트커튼 오감지로 자재호출이 안되고있습니다 확인 부탁드립니다
March 25, 2025 at 2:43 PM, 병현 Mun: 해결되었습니다
March 25, 2025 at 2:50 PM, Mohammad Amir: LR received successfully at 14:43 carrier on the way. ✅ Thank you very much!

Chunk 176:
March 25, 2025 at 6:13 PM, Horváth Adriàn: Sziasztok. @Denkó Jani (F.A.) @Boromisza Zoltán 3-4 között 3as AGV folyamatosan kiàll hibàra. ACS problémàval. Plusz a 4es soron a 3as port nem emelkedik fel automatàn. Check please!
March 25, 2025 at 6:20 PM, Denkó Jani (F.A.): Úton

Chunk 177:
March 25, 2025 at 6:22 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 6+5/11(+1) Tech, 1Sl Overtime(5): Novák Zoltán, Novák Károly, Kasztel Balázs, Zsurbej Zsolt, Nagy Zsolt Holiday(5+1): Czeilinger Krisztián, Gerbovits Kevin, Kovács Ágnes, Pálosi Róbert,Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Kasztel Balázs --------------- Assy GF (3): Novák Zoltán, Novák Károly, Pintye Miklós --------------- Assy 1F (3): Böröczki Balázs, Zsurbej Zsolt, Nagy Zsolt --------------- Form

Chunk 178:
March 25, 2025 at 6:30 PM, Kiara: Sziasztok 2. Emeletre szeretnék karbantartót kérni hátsó raktárba.
March 25, 2025 at 6:39 PM, Denkó Jani (F.A.): Solvedka 🫶🏻🌹
March 25, 2025 at 6:52 PM, Boromisza Zoltán: Kész
March 25, 2025 at 10:37 PM, Muneeb Ur Rehman: @FA can someone bring manual charger to GF 1-2 module line. Agv 2 needs to be charged manually
March 25, 2025 at 10:45 PM, 배병민 (Bae Byoungmin): Find out why your AGV is discharging.

Chunk 179:
March 25, 2025 at 10:49 PM, Muneeb Ur Rehman: I will work on it and will inform soon
March 25, 2025 at 10:49 PM, Denkó Jani (F.A.): Meg van már 🫡
March 26, 2025 at 2:24 AM, Horváth Adriàn: @Denkó Jani (F.A.) @Boromisza Zoltán dokk magasraki segítségért kiàlt. Nézzétek meg pls. Köszi.
March 26, 2025 at 2:25 AM, Boromisza Zoltán: Úton
March 26, 2025 at 2:35 AM, Boromisza Zoltán: @Boromisza Zoltán @Denkó Jani (F.A.) kész

Chunk 180:
March 26, 2025 at 5:34 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check M0STK011 “Crane fork right collapse detect” Thank you!
March 26, 2025 at 5:42 AM, Denkó Jani (F.A.): Solved

Chunk 181:
March 26, 2025 at 6:11 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Viczai Tomi ———————————— Assembly 1F(4) Fabricius Gergő Nagy Tamás Gégény Dávid Simon Attila ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoli Sarvajcz Ferenc

Chunk 182:
March 26, 2025 at 7:57 AM, FACS_JaewonShin: 26th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 26, 2025 at 8:27 AM, Roland: Hello. Could you check M0CNV022 - Cv10 stop detect error, please? thank you
March 26, 2025 at 8:33 AM, duzzaman Md (MCS): @FA Please check M0STK022 “Crane fork left wide error at M0STK022_C01 Thanks

Chunk 183:
March 26, 2025 at 8:41 AM, Döme György F.A: Solved
March 26, 2025 at 8:44 AM, duzzaman Md (MCS): Thank you
March 26, 2025 at 9:03 AM, Roland: M0STK023 Crane fork tight collapse detect. Could you check it, please? Thank you
March 26, 2025 at 9:04 AM, Roland: and M0STK021 too!
March 26, 2025 at 9:07 AM, Zoltán Harasztia FA: Mindjárt megyünk, csak tbm- en vagyunk
March 26, 2025 at 9:48 AM, Döme György F.A: Mind a 2 daru rendben
March 26, 2025 at 10:33 AM, SKOH2/제조-셀,모듈 출하/김병호 invited 애니.

Chunk 184:
March 26, 2025 at 1:36 PM, FACS_JaewonShin: End product agv 12 line out wheel steering problem
March 26, 2025 at 2:55 PM, 손병훈: @배병민 (Bae Byoungmin) 모듈 1라인 엔드플레이트 투입 부분근처에 천장 배선 지나가는 트레이 고정하는 와이어가 풀려서 FA설비 케이블 베어쪽에 간섭이 생깁니다. 확인 부탁드립니다.
March 26, 2025 at 3:01 PM, 배병민 (Bae Byoungmin): @FACS_JaewonShin 팀장님 모듈 1라인 바로 대응좀 부탁합니다
March 26, 2025 at 3:13 PM, FACS_JaewonShin: 알겠습니다.

Chunk 185:
March 26, 2025 at 3:19 PM, 배병민 (Bae Byoungmin): @손병훈 PM님 유틸 덕트 와이어가 쳐짐발생으로 FA 설비 간섭이 우려되는 부분으로 유틸에서 와이어 고정후 설비 재기동 해야 할것으로 판단됩니다
March 26, 2025 at 3:19 PM, 손병훈: 넵 현장에서 말씀드렸듯 유틸에 인폼 해 놨고, 내용 공유차 말씀 드렸습니다.
March 26, 2025 at 3:20 PM, 배병민 (Bae Byoungmin): 넵 감사합니다
March 26, 2025 at 3:31 PM, duzzaman Md (MCS): Please check M0CNV034_RTV01 @FA
March 26, 2025 at 3:36 PM, duzzaman Md (MCS): One job is alternated because M4MFA300_P32 is out of service. @FA please check

Chunk 186:
March 26, 2025 at 3:54 PM, Zoltán Harasztia FA: Please delete the command, they requested it by mistake, and that's why they put the port in manual so it wouldn't show up.
March 26, 2025 at 3:55 PM, Shakir (MCS): On it.
March 26, 2025 at 3:56 PM, Zoltán Harasztia FA: Thank you for your help.
March 26, 2025 at 3:56 PM, Shakir (MCS): The Job has been cancelled successfully. Thank you
March 26, 2025 at 4:00 PM, Zoltán Harasztia FA: Solved
March 26, 2025 at 4:01 PM, Shakir (MCS): Thank you

Chunk 187:
March 26, 2025 at 6:12 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 26, 2025 at 6:26 PM, Simon Attila: Please check second floor RTV car error

Chunk 188:
March 26, 2025 at 6:33 PM, 승규 (BAEK SEUNGGYU): @fa 1라인 완제품 배출 agv 12번 방전된 것 같습니다. 확인 부탁드립니다
March 26, 2025 at 6:34 PM, Muneeb Ur Rehman: On my way
March 26, 2025 at 6:45 PM, FACS_JaewonShin: 12번 라인아웃 호기이고 위치 이동후 정상동작중입니다
March 26, 2025 at 7:00 PM, VK (mcs): @FA Please check M0STK031 MCP 1F OP1 light curtain detect error.
March 26, 2025 at 7:13 PM, Nemes Patrik: Megint nem jön le a kocsiról a raklap …
March 26, 2025 at 8:05 PM, 병현 Mun: M1MFA300_P27 UR 올렸는데 RTD상 잡이 안생깁니다 확인 부탁드립니다

Chunk 189:
March 26, 2025 at 8:09 PM, 병현 Mun: 겐트리PLC 정지 후 재가동하니 잡생겼습니다 해결되었습니다
March 26, 2025 at 9:02 PM, Dávid F.A.: @MCS Good evening.. I would like to request a job cancellation. ID PS290-2406280017 Thank you in advance! Last position M0MGV042_VC01 checked! Not at this position!
March 26, 2025 at 9:03 PM, VK (mcs): Do you have any idea where is the carrier?

Chunk 190:
March 26, 2025 at 9:08 PM, Dávid F.A.: I checked the current one... There are currently no pallets in rows here! As I saw, the work was done on 03.25! There are no warehouses STK025!
March 26, 2025 at 9:09 PM, VK (mcs): Okay thank you I will cancel it.
March 26, 2025 at 9:10 PM, Dávid F.A.: Thank you very much!
March 26, 2025 at 9:12 PM, VK (mcs): Job canceled

Chunk 191:
March 27, 2025 at 5:58 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (4) Kertész Dani Marsi Gábor Skwarek Tibi Viczai Tomi ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Simon Attila ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc

Chunk 192:
March 27, 2025 at 7:58 AM, FACS_JaewonShin: 27th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 27, 2025 at 8:54 AM, SKOH2/제조-셀,모듈 출하/김병호: 남측 M0STK036,037에서 북측 도크장으로 모듈 배출 작업 진행중입니다. M0CNV035_P07 1F 에서 동간 넘어오다거 제품이 멈처 있습니다. 금일 출고작업 진행중이어서 빠른 확인 부탁드립니다

Chunk 193:
March 27, 2025 at 8:55 AM, SKOH2/제조-셀,모듈 출하/김병호: South side M0STK036,037 is in the process of unloading the module to the north dock. M0CNV035_P07 The product is stopped at 1F. We are in the process of shipping today, so please check it quickly.
March 27, 2025 at 8:56 AM, FACS_JaewonShin: 테크니션하고 같이 가보겠습니다.
March 27, 2025 at 8:57 AM, FACS_JaewonShin: @fa technician M0CNV035 RTV has problem. I will go and meet there
March 27, 2025 at 8:58 AM, SKOH2/제조-셀,모듈 출하/김병호: 네 감사합니다

Chunk 194:
March 27, 2025 at 9:00 AM, FACS_JaewonShin: 요청시 @facs 또는 @FA Technician 넣어주시면 좀더 빠른확인 가능할거같습니다.
March 27, 2025 at 9:00 AM, SKOH2/제조-셀,모듈 출하/김병호: 네 다음부터 적어 드리겠습니다
March 27, 2025 at 9:04 AM, FACS_JaewonShin: 북쪽창고 auto상태가 아니어서 넘어가지 않고 있었습니다. 현재 가동중입니다
March 27, 2025 at 1:33 PM, 권민석/Kwon Minseok: @mcs m1mfa300_p29 job delete please
March 27, 2025 at 1:34 PM, 권민석/Kwon Minseok: Please delete the work.
March 27, 2025 at 1:36 PM, Shakir (MCS): The Job has been cancelled ✅ Thank you

Chunk 195:
March 27, 2025 at 1:45 PM, Shakir (MCS): @FA @Döme György F.A Please check M0STK023 “Crane fork left collapse detect” Thank you!
March 27, 2025 at 1:47 PM, Zoltán Harasztia FA: Cheking
March 27, 2025 at 2:00 PM, Zoltán Harasztia FA: Solved
March 27, 2025 at 2:02 PM, Shakir (MCS): Thank you
March 27, 2025 at 2:04 PM, Shakir (MCS): There is a stop detect error on M0CNV021_P11_BP01. Please check
March 27, 2025 at 2:05 PM, Zoltán Harasztia FA: Cheking

Chunk 196:
March 27, 2025 at 2:08 PM, Zoltán Harasztia FA: Solved
March 27, 2025 at 2:19 PM, Shakir (MCS): Please check M0CNV023_RTV03 ,RTV car return to origin error. Thank you
March 27, 2025 at 2:21 PM, Zoltán Harasztia FA: Solved
March 27, 2025 at 2:52 PM, Sarvajcz Ferenc FA: Box packing, oldalsó fal ferde.
March 27, 2025 at 2:56 PM, Sarvajcz Ferenc FA: Kész, de Koreai kollégak dolgoznak
March 27, 2025 at 3:38 PM, Roland: Could you check M0CNV21 -Cv027 div pallett detect error, please? thank you

Chunk 197:
March 27, 2025 at 3:40 PM, Zoltán Harasztia FA: Megyek
March 27, 2025 at 6:10 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs

Chunk 198:
March 27, 2025 at 11:32 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check M0STK034 “Crane STK action 5 min time over error “ Thank you.
March 27, 2025 at 11:46 PM, F.A.Balazs: Complete

Chunk 199:
March 28, 2025 at 6:32 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 13 Technician, 1 Sl, 4 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 200:
March 28, 2025 at 7:46 AM, FA CS AGV Jawad: @Mohammad Amir can you check is there any job exists for Box packing line ? ( in Module side)
March 28, 2025 at 7:46 AM, Mohammad Amir: Checking!
March 28, 2025 at 7:51 AM, Mohammad Amir: There is no Job exists. Thank you very much!

Chunk 201:
March 28, 2025 at 7:52 AM, FACS_JaewonShin: 28th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 28, 2025 at 8:55 AM, Alexandra: 2f cv026 stop detect error
March 28, 2025 at 8:59 AM, 권민석/Kwon Minseok: @fa calling 1-line materials, but it is being delayed. Please check it out.

Chunk 202:
March 28, 2025 at 9:00 AM, Mohammad Amir: Sir, Please tell me which Port Id you are requesting,I will check. Thank you very much!
March 28, 2025 at 9:01 AM, 권민석/Kwon Minseok: 1 Line 28-31,16,19 ports
March 28, 2025 at 9:02 AM, Mohammad Amir: Checking Sir
March 28, 2025 at 9:04 AM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check PS210-2410160073 located at M0CNV023_B03 it is not moving and blocking materials delivery to line -1. Thank you very much!

Chunk 203:
March 28, 2025 at 9:05 AM, Mohammad Amir: Sir, Everything good from MCS/RTD side ✅. Just one material blocking transfer,I already informed FA. Thank you very much!
March 28, 2025 at 9:10 AM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check M0CNV023_34_027 there is Home Run Time over error. Thank you very much!
March 28, 2025 at 9:13 AM, Mohammad Amir: Issue has been resolved ✅. Material transfer has been normalised. Thank you very much!
March 28, 2025 at 9:13 AM, Zoltán Harasztia FA: Solved

Chunk 204:
March 28, 2025 at 9:13 AM, Mohammad Amir: Thank you very much!
March 28, 2025 at 9:42 AM, 윤성제(Yoon SungJe): @FA 1라인 35번 포트 AGV가 PALLET 안착을 잘못했습니다 확인 부탁드립니다
March 28, 2025 at 9:43 AM, 권민석/Kwon Minseok: @FACS_JaewonShin 현장 확인 부탁드립니다 매니저님
March 28, 2025 at 9:43 AM, FACS_JaewonShin: 현장으로 가겠습니다.
March 28, 2025 at 9:45 AM, FACS_JaewonShin: @FA AGV Location : M1MFA300_P35 Problem : failed pallet location.

Chunk 205:
March 28, 2025 at 11:23 AM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check M0CNV021_BP02 there is DIV redirect CV stop Error. Thank you very much!
March 28, 2025 at 11:34 AM, Mohammad Amir: @FA Please check this error exists since 11:04. Thank you very much!
March 28, 2025 at 11:35 AM, Zoltán Harasztia FA: Cheking
March 28, 2025 at 11:35 AM, Mohammad Amir: Thank you very much!

Chunk 206:
March 28, 2025 at 11:57 AM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check M0CNV022_M01 there is Pallet Overhang Det Error. Thank you very much!
March 28, 2025 at 12:55 PM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check M0CNV022_M02 there is Pallet Overhang Det Error. Thank you very much!
March 28, 2025 at 2:15 PM, 배병민 (Bae Byoungmin): @김지형(Jihyung Kim) PM님 모듈 1라인 샘플생산 금일로 마무리되는건지 문의드립니다.
March 28, 2025 at 2:23 PM, 김지형(Jihyung Kim): 네 금일이 마지막입니다.

Chunk 207:
March 28, 2025 at 2:25 PM, 배병민 (Bae Byoungmin): 네 감사합니다. 생산 종료 시점에서 우선 AGV 전원 Off후 재생산 시점에서 투입하겠습니다
March 28, 2025 at 3:06 PM, Mohammad Amir: @Zoltán Harasztia FA @FA Please check M0STK021_C01 there is CRANE FORK Left collapse detect alarm Thank you very much!
March 28, 2025 at 3:07 PM, Zoltán Harasztia FA: Cheking
March 28, 2025 at 3:07 PM, Mohammad Amir: Thank you very much!
March 28, 2025 at 3:11 PM, Zoltán Harasztia FA: Solved
March 28, 2025 at 3:21 PM, Alexandra: 2f cv036 stop detect error

Chunk 208:
March 28, 2025 at 3:27 PM, Zoltán Harasztia FA: Kész
March 28, 2025 at 4:06 PM, Maczó Anikó: 2f floor in pozitívnak error
March 28, 2025 at 4:18 PM, Brázik János: Kész
March 28, 2025 at 4:19 PM, Mohammad Amir: @Brázik János Please check M0STK037 _C01 there is CRANE STK 5 minutes Timeover error. Thank you very much!
March 28, 2025 at 4:23 PM, Zoltán Harasztia FA: Solved
March 28, 2025 at 4:23 PM, Mohammad Amir: Thank you very much 🙏!

Chunk 209:
March 28, 2025 at 5:13 PM, Mohammad Amir: @Zoltán Harasztia FA Please check M0CNV023_RTV01 there is RTV Car Fiber Communication Error. Thank you very much!
March 28, 2025 at 5:24 PM, Zoltán Harasztia FA: Solved
March 28, 2025 at 5:26 PM, Mohammad Amir: Thank you very much!

Chunk 210:
March 28, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 9+2/11(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(2+1): Pálosi Róbert, Kovács Ágnes, (+Radics András) Sick(0): --------------- Electrode3): Szabadi Miki, Kiss Balázs, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Denkó János --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztás

Chunk 211:
March 28, 2025 at 6:48 PM, (Unknown): Hali 2 e. Foliázó gép előtt a szenzor nem érzékel! Köszönöm;Niki
March 28, 2025 at 7:12 PM, Gerbovits Kevin: Megyünk
March 28, 2025 at 10:01 PM, Boromisza Zoltán: @Shahbaz 샤바즈 MCS/RTD Please help, I need to delete a piece of data, skoh packing convy 33045 carrier id S100901E5CP073CPF31331
March 28, 2025 at 10:03 PM, Shahbaz 샤바즈 MCS/RTD: Checking
March 28, 2025 at 10:03 PM, Boromisza Zoltán: Thank you

Chunk 212:
March 28, 2025 at 10:05 PM, Shahbaz 샤바즈 MCS/RTD: So what should I delete? Any job are data?
March 28, 2025 at 10:06 PM, Boromisza Zoltán: Yes
March 28, 2025 at 10:08 PM, (Unknown): 2.emelet CVO21 stop detect error RTV carcv ccw run Time delay
March 28, 2025 at 10:09 PM, Shahbaz 샤바즈 MCS/RTD: There is no job against this carrier and it stored to stocker M0STK034-0202506 What action should i take?
March 28, 2025 at 10:16 PM, Boromisza Zoltán: then nothing thank

Chunk 213:
March 28, 2025 at 10:17 PM, Shahbaz 샤바즈 MCS/RTD: Ok.
March 29, 2025 at 6:10 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl ———————————— Electrode (3): Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 214:
March 29, 2025 at 6:30 AM, Mohammad Amir: @FA @Brázik János Please check M0STK012 there is Firesensor Abnormal state alarm. Thank you very much!
March 29, 2025 at 6:45 AM, Brázik János: Megyek
March 29, 2025 at 6:49 AM, Brázik János: Solved
March 29, 2025 at 6:49 AM, Mohammad Amir: Thank you very much!
March 29, 2025 at 6:56 AM, Brázik János: Modul cellbuffer AGV#9 Solved
March 29, 2025 at 7:21 AM, Mohammad Amir: Could you please check again ,I see this alarm still exists. Thank you very much 🙏!

Chunk 215:
March 29, 2025 at 9:05 AM, Mohammad Amir: @Brázik János Please check M0CNV023_RTV01 there is RTV car return to origin Error , causing delay. Thank you very much!
March 29, 2025 at 9:06 AM, 윤성제(Yoon SungJe): @FA line 1 port 28 material cannot be recovered. Is there anyone who can check this?

Chunk 216:
March 29, 2025 at 9:09 AM, Mohammad Amir: For Line-1 P28 (M1MFA300_P28) We received UR at 8:34 . And reply is that UR has failed cause not allowed MES state. Carrier id:-PS230-2502260004. @MES , Please check the issue. Thank you very much!
March 29, 2025 at 9:29 AM, Mohammad Amir: @FA @Csepi Árpád Please check this error exists since 8:44 and because of this several jobs are waiting. Thank you very much!
March 29, 2025 at 9:37 AM, Brázik János: Solved

Chunk 217:
March 29, 2025 at 9:38 AM, Mohammad Amir: Thank you very much!
March 29, 2025 at 10:07 AM, 윤성제(Yoon SungJe): @MCS can you delete the M1MFA300_p28 work? Please
March 29, 2025 at 10:07 AM, Mohammad Amir: Checking,Sir!
March 29, 2025 at 10:08 AM, Mohammad Amir: Sir, There is no job because of UR is being failed cause of not allowed MES state. I already informed MES team mmebe about the issue. Thank you very much!
March 29, 2025 at 10:09 AM, Mohammad Amir: Member**

Chunk 218:
March 29, 2025 at 10:10 AM, 윤성제(Yoon SungJe): Thank you so much
March 29, 2025 at 10:10 AM, Mohammad Amir: You are welcome,Sir!
March 29, 2025 at 10:10 AM, Mohammad Amir: @MES Please check this issue ,it still exists. Thank you very much!
March 29, 2025 at 10:22 AM, 윤성제(Yoon SungJe): It's my mistake, I'll take care of it again.
March 29, 2025 at 10:29 AM, Mohammad Amir: @FA @Csepi Árpád Please M0STK021_C01 there is MCP GF OP1 Light Curtain detected error. Thank you very much!

Chunk 219:
March 29, 2025 at 10:31 AM, Mohammad Amir: @FA @Brázik János Please check M0STK012 there is Firesensor Abnormal state alarm still exists. Thank you very much!
March 29, 2025 at 10:41 AM, Mohammad Amir: UR has started to receive successfully ✅. Thank you very much!
March 29, 2025 at 10:42 AM, 윤성제(Yoon SungJe): I'm sorry, but I won't let this happen next time.
March 29, 2025 at 10:49 AM, Mohammad Amir: @FA @Csepi Árpád Please check this error exists since 10:17. Thank you very much!

Chunk 220:
March 29, 2025 at 10:52 AM, Mohammad Amir: @FA @Brázik János Please check M0STK012_0201113 there is Fire and smoke detected in shelf alaram. Thank you very much!
March 29, 2025 at 10:56 AM, Mohammad Amir: @FA @Édl Tamás Please check M0STK028_C01 there is CRANE FORK Left collapse detect 2 alarm and causing several jobs to be in alternated state. Thank you very much!

Chunk 221:
March 29, 2025 at 10:57 AM, Mohammad Amir: @FA @Édl Tamás Also please check M0CNV021_RTV01 there is Car Fiber Communication Error two jobs are pending. Thank you very much!
March 29, 2025 at 10:57 AM, 배병민 (Bae Byoungmin): @FA This is a fire alarm. Please go and check it out quickly. If there is a problem with the sensor, please let me know.
March 29, 2025 at 10:59 AM, Csepi Árpád: The fire alarm is giving a false signal.

Chunk 222:
March 29, 2025 at 11:01 AM, 배병민 (Bae Byoungmin): There may be foreign matter in it. Please open the smoke sensor and check.
March 29, 2025 at 11:04 AM, Csepi Árpád: The fire alarm is coming from the 11th position on the top level of Bank 2. It is not accessible.
March 29, 2025 at 11:14 AM, Maczó Anikó: Sziasztok 2 emeleten meg álltak az anyagok nem megy be a raktárba és nem is jön hibát nem jelez a gép

Chunk 223:
March 29, 2025 at 11:15 AM, Mohammad Amir: Currently M0STK028 is OOS that's why this phenomenon is happening,I already informed the FA. Thank you very much!
March 29, 2025 at 11:17 AM, Mohammad Amir: Currently material in RTV02_M0CNV023 is busy with materials which has destination M0STK028 and as STK028 is OOS so RTV can not deliver material and causing traffic of materials on the CNV023. Thank you very much!

Chunk 224:
March 29, 2025 at 11:19 AM, Mohammad Amir: @FA @Brázik János Please check M0CNV023_82_003 there is Work Data Error. Thank you very much!
March 29, 2025 at 11:19 AM, Maczó Anikó: 2 emeleten cv003 stop detect error
March 29, 2025 at 11:20 AM, Csepi Árpád: Megyunk
March 29, 2025 at 11:21 AM, Maczó Anikó: Köszönöm
March 29, 2025 at 11:24 AM, Brázik János: Solved
March 29, 2025 at 11:25 AM, Mohammad Amir: Thank you very much!

Chunk 225:
March 29, 2025 at 11:27 AM, Mohammad Amir: @FA @Csepi Árpád @Brázik János @Édl Tamás Please check this issue exists since 10:17 AM. Thank you very much!
March 29, 2025 at 11:39 AM, Csepi Árpád: M0STK 028 is operating in automatic mode!
March 29, 2025 at 11:40 AM, Mohammad Amir: Thank you very much!

Chunk 226:
March 29, 2025 at 11:49 AM, Mohammad Amir: @Csepi Árpád Please check M0CNV023_RTV02 is OOS cause of Car Fiber Communication Error and eventually there is traffic of materials on M0CNV023. Thank you very much!
March 29, 2025 at 11:52 AM, Csepi Árpád: M0STK 021 is operating in automatic mode!
March 29, 2025 at 11:52 AM, Mohammad Amir: Thank you very much!
March 29, 2025 at 11:53 AM, Csepi Árpád: I am on my way already.

Chunk 227:
March 29, 2025 at 11:53 AM, Mohammad Amir: Thank you very much for your hard work , Appreciated.🙏
March 29, 2025 at 11:54 AM, Mohammad Amir: Error has been resolved now ✅. Materials flow has been normalised. Thank you very much!
March 29, 2025 at 11:55 AM, Brázik János: Sűrű volt a program az emeleten
March 29, 2025 at 11:58 AM, Csepi Árpád: Solved
March 29, 2025 at 2:12 PM, 손병훈: line#3,4 cell input is stopped

Chunk 228:
March 29, 2025 at 2:12 PM, 손병훈: M0stk012 is still OOS please check all the line is stopped
March 29, 2025 at 2:14 PM, 배병민 (Bae Byoungmin): @손병훈 PM님 현재 설버퍼 2번창고 천장 누수로 인해 설비가 다운된 상태입니다. 죄송하지만 우선 2번 창고 자동포트에 배출되어있는 화물 지게차로 수동투입 가능하실까요?
March 29, 2025 at 2:20 PM, 손병훈: 유선상 말씀드린대로, 모듈3,4라인 셀 투입 잡 생성된 4라인 : T703942/T703910 3라인 : T704410/T703934 잡 삭제 부탁드리고 스태커 3,4호기로 투입 요청드립니다.
March 29, 2025 at 2:24 PM, 손병훈: 2번창고 자동포트 배출되어있는 팔레트 없다고 합니다.

Chunk 229:
March 29, 2025 at 2:32 PM, 손병훈: @배병민 (Bae Byoungmin) 지금 답장이 없으셔서 제가 job 삭제하고 다시 라인에서 LR올렸는데 1호기에서 잡이 생깁니다. 이것도 중간 동간물류타려면 2호기 지나와야하는거같은데 나올수있는게 맞을까요? 이미 T703901도 못나오고 있는거같은데
March 29, 2025 at 2:36 PM, Mohammad Amir: Issue has been resolved. Material delivery to Module line 3 and Line -4 has been normalised ✅ Monitoring the process. Thank you very much!
March 29, 2025 at 2:37 PM, 배병민 (Bae Byoungmin): 1번창고에서 3번창고를 통해 4번창고로 나올수있게 되어있습니다

Chunk 230:
March 29, 2025 at 2:38 PM, Mohammad Amir: Materials for Line 3 :- Will arrive this Path :- M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M3MFA300. Materials for Line 4:- Will arrive this Path :- M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M4MFA300.
March 29, 2025 at 2:40 PM, 손병훈: 네 확인했습니다 방향전환 되어있나보네요 감사합니다. 추가로 지금 T703901이 M0STK012_P06에 있는데 해당 팔레트도 전산상 현재 모듈 입고 상태라 실물 입고 필요합니다. 혹시 해당 자재 수동출고 가능 할까요?

Chunk 231:
March 29, 2025 at 2:43 PM, 배병민 (Bae Byoungmin): 넵 방향 전환되었습니다. 현재 2번창고 유틸 점검 조치 및 물기 제거중이로 스태커 운행이 불가해서 수습 이후 수동으로 출고 가능한상황입니다
March 29, 2025 at 2:45 PM, 손병훈: 넵 확인 감사합니다. 해당건 해결되면 스태커2호기 비가동으로 인한 실물-전산 틀어짐은 없을 것 같습니다. 다만 해당 팔레트 지금 Job이 없어서 조치후 수동 출고가 필요할 것 같습니다. 수동 출고 가능시 말씀 주시면 지게차 보내도록 하겠습니다.
March 29, 2025 at 2:46 PM, 배병민 (Bae Byoungmin): 넵 알겠습니다 감사합니다
March 29, 2025 at 5:32 PM, Atom Yang(MCS/RTD): Photo

Chunk 232:
March 29, 2025 at 5:33 PM, Atom Yang(MCS/RTD): InventoryMove 시간이 오래 걸린 듯 합니다. 럽무에 참고하시기 바랍니다.
March 29, 2025 at 5:45 PM, 손병훈: @Choi Inbo/최인보 WMS 쪽에서 iventortmvt reply가 없습니다 확인부탁드립니다
March 29, 2025 at 5:58 PM, 손병훈: @최용회 @KIMYOUNGKWANG 확인가능하실까요 PS22A-2503070051 (22A-00285A / 2p18r lwr case) inventorymovement reply가 없어서 입고가 안되었습니다.

Chunk 233:
March 29, 2025 at 6:20 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 10+1/11(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(1+1): Pálosi Róbert (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Szabadi Miki, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Denkó János --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő

Chunk 234:
March 29, 2025 at 6:57 PM, VK (mcs): @FA Please check Cell buffer M0STK014 Crane PLC interface error!
March 29, 2025 at 7:00 PM, FA CS AGV David 데이비드: Solved
March 29, 2025 at 7:35 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.29 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 29, 2025 at 8:40 PM, 배병민 (Bae Byoungmin): @손병훈 PM님 셀버퍼 2번창고 정상화되어 반송진행중입니다. T703901 제품은 19시46분쯤 모듈 3라인으로 자동 반송되었습니다.
March 29, 2025 at 8:40 PM, 손병훈: 확인감사합니다!

Chunk 235:
March 29, 2025 at 11:16 PM, (Unknown): 2. Emeletről dupla palettás anyag megy le! Csak szólok,ne érjen senkit váratlanul!
March 29, 2025 at 11:25 PM, (Unknown): 2. Emelet lift error
March 30, 2025 at 5:18 AM, 최용회 invited 민지홍.
March 30, 2025 at 6:12 AM, Bozó Gyula: Jó reggelt!! Szeretnék segítséget kérni a Modul OQC porthoz! Köszönöm!

Chunk 236:
March 30, 2025 at 6:18 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————
March 30, 2025 at 1:07 PM, Alexandra: 2f out lift conveyor det error

Chunk 237:
March 30, 2025 at 6:17 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(5): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián, Gégény Dávid --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János ---------

Chunk 238:
March 30, 2025 at 6:32 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 239:
March 30, 2025 at 7:50 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 30, 2025 at 10:01 PM, VK (mcs): @FA Please check M0STK 033 Crane rack position does not detect error!
March 30, 2025 at 10:05 PM, Boromisza Zoltán: Okey
March 30, 2025 at 10:28 PM, (Unknown): @Denkó Jani (F.A.) 2 emelet fóliázógépnél az anyag lefordult a palettáról! Üdv;Niki

Chunk 240:
March 30, 2025 at 10:29 PM, Denkó Jani (F.A.): @(Unknown) szia Niki! Hamarosan érkezünk,csak jelenleg minden ügyintézőnk foglalt 🫣😅
March 30, 2025 at 10:31 PM, (Unknown): @Denkó Jani (F.A.) a helyzet káosz,szóval mind a 3an kelletek 🥹 Niki
March 30, 2025 at 10:39 PM, Boromisza Zoltán: Solved
March 30, 2025 at 10:50 PM, Denkó Jani (F.A.): Kész 🙄💪🏻
March 31, 2025 at 1:31 AM, Horváth Adriàn: @Denkó Jani (F.A.) @Boromisza Zoltán 3-4sor között a kis AGV nem viszi el a Kalodàt. Check pliiz

Chunk 241:
March 31, 2025 at 1:31 AM, Denkó Jani (F.A.): Azonnal megyünk 🫡
March 31, 2025 at 1:42 AM, Denkó Jani (F.A.): Kész 🤙🏻
March 31, 2025 at 5:59 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:8/12 Overtime (0):- Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(2): Magyar Balázs, Nagy Gábor

Chunk 242:
March 31, 2025 at 6:52 AM, Simon Attila: Please check second floor RTV car error Thank you
March 31, 2025 at 7:12 AM, N.Gábor F.A.: Good morning Can you check me pls why this 2 job Queud? Carrier IDs: U017456 U017579 @MCS
March 31, 2025 at 7:15 AM, Shakir (MCS): For U017456 job just created 4 min ago, storage reply is Okay.
March 31, 2025 at 7:22 AM, Shakir (MCS): U017579 Transfer job cancelled by OP action.

Chunk 243:
March 31, 2025 at 7:29 AM, N.Gábor F.A.: Yes, it was me, after that work returned to normal
March 31, 2025 at 7:29 AM, Shakir (MCS): U017534 job has been successfully created and on the way for Line 4 (M4MFA300_P05). AGV#15 has been assigned. ✅ Thank you
March 31, 2025 at 7:31 AM, Shakir (MCS): **AGV#14

Chunk 244:
March 31, 2025 at 8:38 AM, FACS_JaewonShin: 31st march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong
March 31, 2025 at 9:07 AM, SKOH2/제조-셀,모듈 출하/김병호: M0STK033 - U016472 - U016403 RTD 잡생성후 해당 제품이 배출 되지 않습니다. 모듈 이관제품이라 빠른 확인 부탁드립니다

Chunk 245:
March 31, 2025 at 9:08 AM, SKOH2/제조-셀,모듈 출하/김병호: M0STK033 U016472 U016403 After creating the RTD job, the product will not be released. Please check it quickly because it is a module transfer product.
March 31, 2025 at 9:10 AM, (Unknown): @FA Please check the M0STK033. The StorageCarrierTransferReply for these carriers is Success but carriers are not moving. Thank you very much
March 31, 2025 at 9:12 AM, N.Gábor F.A.: Checking

Chunk 246:
March 31, 2025 at 9:12 AM, (Unknown): Please check the M0ST033_C01 It's not transferring the carriers
March 31, 2025 at 9:17 AM, FACS_JaewonShin: 내용 확인중입니다
March 31, 2025 at 9:30 AM, FACS_JaewonShin: 33스토커 scs오프라인 되었습니다. 재가동 까지 시간 걸릴거같습니다.
March 31, 2025 at 10:02 AM, FACS_JaewonShin: 현장 조치했습니다.
March 31, 2025 at 10:14 AM, SKOH2/제조-셀,모듈 출하/김병호: M0STK033 1F port no: M0CNV033_P06 carrier id : U016403 제품이 아직 계속 대기중인데 확인 부탁드립니다
March 31, 2025 at 10:14 AM, FACS_JaewonShin: 1f로 가겠습니다

Chunk 247:
March 31, 2025 at 10:18 AM, (Unknown): This message was deleted.
March 31, 2025 at 10:20 AM, SKOH2/제조-셀,모듈 출하/김병호: We need to transfer the finished product to STK033 today. Please let us know when it can be operated
March 31, 2025 at 10:20 AM, (Unknown): For your information based on the request from FA and operation. The stk33 is Offline now, The warehouse is under repair for an indefinite period. The job is created for this carrier ID Thank you very much

Chunk 248:
March 31, 2025 at 10:21 AM, FACS_JaewonShin: I will check stacker 33 status again
March 31, 2025 at 10:25 AM, (Unknown): U016403 carrier is moving and transport job is completed We don't know exactly when the repair will finish. Once we get an update from the operations and FA we will update you in this group
March 31, 2025 at 10:28 AM, 권민석/Kwon Minseok left this chatroom.

Chunk 249:
March 31, 2025 at 10:43 AM, (Unknown): For your information The STK033 is online. And the carrier started to move towards M03. Thank you very much
March 31, 2025 at 10:48 AM, N.Gábor F.A.: @MCS Could you please return this material to one of the warehouses? U017462 It is currently on the AGV, but there will be no production on the line today.
March 31, 2025 at 10:52 AM, Shakir (MCS): The Job has been created ✅
March 31, 2025 at 10:52 AM, N.Gábor F.A.: Thank you It's already going

Chunk 250:
March 31, 2025 at 11:20 AM, FA-CS-AGV-Masoud: @FA please check port MOSTK012_p10
March 31, 2025 at 11:27 AM, Shakir (MCS): @FA Could you please check the Port M4MFA300_P04, It is occupied by carrier T704911. One job is waiting for the same destination. Thank you
March 31, 2025 at 11:28 AM, N.Gábor F.A.: Checking
March 31, 2025 at 11:41 AM, N.Gábor F.A.: T704911 is already loaded onto the production line, there is no material on port P04.

Chunk 251:
March 31, 2025 at 11:43 AM, Shakir (MCS): Alright, The carrier data is cleared from the Port. Thank you
March 31, 2025 at 11:44 AM, N.Gábor F.A.: Okay Thank you
March 31, 2025 at 11:46 AM, Shakir (MCS): @ACS Please check the AGV#12 it has PIO loading error. Thank you
March 31, 2025 at 11:46 AM, N.Gábor F.A.: We are here
March 31, 2025 at 11:52 AM, Shakir (MCS): The problem has been resolved agv#12 successfully unload the carrier to the Port 04. ✅ Thank you

Chunk 252:
March 31, 2025 at 1:17 PM, Shakir (MCS): This message was deleted.
March 31, 2025 at 1:17 PM, Shakir (MCS): @FA Please check M0STK023_C01 there is CRANE FORK right collapse detect 1 alarm and causing some jobs getting delayed. Thank you very much!
March 31, 2025 at 1:18 PM, N.Gábor F.A.: Checking

Chunk 253:
March 31, 2025 at 6:09 PM, Farkas Tamàs: Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 ———————————— Electrode (4) Kertész Dani Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Denkó János ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc

Chunk 254:
March 31, 2025 at 7:06 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 31, 2025 at 7:29 PM, Atom Yang(MCS/RTD): Photo
March 31, 2025 at 7:30 PM, Atom Yang(MCS/RTD): @MES, WMS InventoryMove Timeout 발생하였습니다. 업무에 참고하시기 바랍니다.
March 31, 2025 at 8:03 PM, 최용회: 해당건 wms에서 rtd msg 수신 후 모듈 mes로 msg 전달 과정에서 자재lot정보를 제대로 전달해 주지 못한거 같습니다. wms 에서 확인 필요할꺼 같습니다.
March 31, 2025 at 8:04 PM, 최용회 invited 김동식/SKC&C/ROC.

Chunk 255:
March 31, 2025 at 8:06 PM, Choi Inbo/최인보: 메세지 및 로그 확인후 상황 공유 드리겠습니다
March 31, 2025 at 8:35 PM, 손병훈: 네 감사합니다
March 31, 2025 at 9:10 PM, 손병훈: 명일 생산 마감이라 오전 9시 전에 입고 될 수 있도록 부탁드립니다
March 31, 2025 at 9:24 PM, Choi Inbo/최인보: 그렇다면 우선 메시지를 다시 발생시켜서 시스템적으로 처리시키는 것 보다는 해당 팔렛의 자재가 모듈 몇라인으로 입고되는지 확인해서 wms수동출고, mes수동입고하는 것이 빠를 것 같은데 모듈 몇라인에서 사용하실 자재인지 알고 계신가요?
March 31, 2025 at 9:36 PM, Choi Inbo/최인보: 혹시 mcs,rtd에서 동일 inventory move메시지 재전송해 주실 수 있으신가요?
March 31, 2025 at 10:01 PM, 박태영: 확인 좀 햐볼게요

Chunk 256:
March 31, 2025 at 10:08 PM, 손병훈: 4라인입니다.
March 31, 2025 at 10:11 PM, 박태영: RTD -> MES 로 메세지를 인위적으로 생성해야하는 방법이 있는데 이 방법은 하지 않는것이 좋을듯 합니다
March 31, 2025 at 10:17 PM, Choi Inbo/최인보: 우선 저 타이밍때 접속에러가 나서 타임아웃이 발생됐는데 원인은 추가분석 해봐야될거 같습니다. 이번 자재 팔렛을 wms 출고할 수 있는데 mes 자재입고 화면에서 수동으로 입고처리해 주실 수 있으신가요?
March 31, 2025 at 10:21 PM, 손병훈: 네 wms출고하면 mes에서 수동처리하겠습니다

Chunk 257:
March 31, 2025 at 10:38 PM, HY: 수동 출고 후 모듈 자재입고등록에 확인했습니다 PS230-2503270004, April 1, 2025 at 6:28 AM April 1, 2025 at 6:28 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:8/12+1 overtime Overtime (1): Boromisza Zoltán Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Boromisza Zoltán April 1, 2025 at 7:56 AM, FACS_JaewonShin : ■ 1st April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 1, 2025 at 9:25 AM, Mohammad Amir : @FA @Boromisza Zoltán . Please check M0CNV031_RTV01 it is OOS ,is there any maintenance going on? Thank you very much! April 1, 2025 at 9:33 AM, FA-CS-AGV-Masoud : @FA please check port MOMGV012_VC11 April 1, 2025 at 10:02 AM, Mohammad Amir : @FA @Boromisza Zoltán Please check M0CNV036_RTV01 there is Car distance sensor time delay error causing some jobs to be late. Thank you very much! April 1, 2025 at 10:06 AM, Boromisza Zoltán : Korean colleagues are working on it April 1, 2025 at 10:07 AM, Mohammad Amir : Thank you very much for your information! April 1, 2025 at 10:08 AM, Boromisza Zoltán : Szívesen April 1, 2025 at 11:10 AM, Nemes Patrik : Rtv car stop working 2nd floor April 1, 2025 at 12:13 PM, Roland : Hello, can you check m0stk022 - rtv car det sensor delay error, please? thank you April 1, 2025 at 12:13 PM, N.Gábor F.A. : Megyünk April 1, 2025 at 1:29 PM, Tóth Gyula : Sziasztok, MOCNV036 M_02 állomáson megállt a cella kiszedès. Hibát nem ír. Rá tudnátok nèzni? Köszönöm szépen. April 1, 2025 at 1:34 PM, N.Gábor F.A. : Szia Mindjárt meg nézzük April 1, 2025 at 4:22 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_35_028 there is Wrapper wrap Residual Det. alarm it is causing delay. Thank you very much! April 1, 2025 at 4:23 PM, N.Gábor F.A. : Checking April 1, 2025 at 4:40 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_35_028 there is Wrapper wrap Residual Det. alarm it is causing delay again came. Thank you very much! April 1, 2025 at 4:41 PM, N.Gábor F.A. : Foil replacement required on unit People in the area are working on it Please be patient April 1, 2025 at 4:41 PM, Mohammad Amir : Thank you very much for the information! April 1, 2025 at 4:41 PM, N.Gábor F.A. : Your welcome April 1, 2025 at 5:52 PM, VacziGyula : Sziasztok! 2 emeleten cv 30 work data error & rtv cv limit der sensor delay April 1, 2025 at 5:55 PM, 승규 (BAEK SEUNGGYU) : @FA 완제품 배출 AGV 7번 정지상태입니다 확인 부탁드립니다 April 1, 2025 at 5:55 PM, Döme György F.A : Amint tudunk érkezünk.Műszakátadáson vagyunk Elektródán April 1, 2025 at 6:16 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Gégény Dávid ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc April 1, 2025 at 6:35 PM, Zoltán Harasztia FA invited Halász György SL. April 1, 2025 at 6:35 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 2025.Apr Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 1, 2025 at 6:48 PM, Döme György F.A : Kész April 1, 2025 at 8:48 PM, Zoltán Harasztia FA : @mcs Hi, could you help us? In warehouse M0STK028, there is a command for the crane, but it has already completed the task and placed the material (PS230-2412090042) on the designated shelf at location 0201501. Could you update it? April 1, 2025 at 8:49 PM, Shahbaz 샤바즈 MCS/RTD : Checking April 1, 2025 at 8:52 PM, Shahbaz 샤바즈 MCS/RTD : I updated. Please can you confirm it. April 1, 2025 at 8:58 PM, Zoltán Harasztia FA : The problem is that the warehouse system still shows the shelf as empty. We have deleted the command. April 1, 2025 at 8:59 PM, Shahbaz 샤바즈 MCS/RTD : Please remove it and restock again. April 2, 2025 at 6:15 AM April 2, 2025 at 6:15 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 2, 2025 at 7:54 AM, FACS_JaewonShin : ■ 2nd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 2, 2025 at 9:45 AM, Maczó Anikó : Sziasztok 2 emeleten hiba a raktárba April 2, 2025 at 9:59 AM, Mohammad Amir : This message was deleted. April 2, 2025 at 9:59 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK033_C01 there is MCP 1F HP light curtain detected error. Thank you very much! April 2, 2025 at 10:11 AM, Csepi Árpád : Solved April 2, 2025 at 10:12 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 10:12 AM, Csepi Árpád : You’re welcome! April 2, 2025 at 10:13 AM, Mohammad Amir : Could you please also check M0CNV023_84_023 there is Product Detect error it exists since 9:08. Thank you very much! April 2, 2025 at 10:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 북측 모듈 M0STK031 1F M0CNV033_RTV01 정지상태여서 제품 배출이 되지않고 있습니다 확인 부탁드립니다 April 2, 2025 at 10:14 AM, FACS_Hyeongi Son : 이동하겠습니다 April 2, 2025 at 10:15 AM, SKOH2/제조-셀,모듈 출하/김병호 : 현지 테크니션분이 조치 해주신거 같습니다 April 2, 2025 at 10:16 AM, FACS_Hyeongi Son : 넵 확인했습니다 April 2, 2025 at 12:59 PM, Roland : Hello. Please check M0CNV021-CV10 product detect error? Thank you April 2, 2025 at 1:03 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV021_RTV01 interface error. Thank you very much! April 2, 2025 at 1:19 PM, Csepi Árpád : Solved April 2, 2025 at 1:57 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV036_RTV01 there is RTV Car fiber communication error. Thank you very much! April 2, 2025 at 2:18 PM, Roland : Hello. M0CNV021-CV15 Interface and work data error. Can you check it please? Thank you April 2, 2025 at 2:40 PM, Csepi Árpád : Solved April 2, 2025 at 2:40 PM, Mohammad Amir : Thank you very much! April 2, 2025 at 2:50 PM, Édl Tamás : Solved April 2, 2025 at 6:08 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 2, 2025 at 6:18 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.04.02 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen April 2, 2025 at 8:20 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK025_C01 there is CRANE FORK Left wide#1 check error. Thank you. April 2, 2025 at 8:39 PM, Denkó Jani (F.A.) : Solved April 2, 2025 at 9:57 PM, Kiara : Sziasztok Második emeletre szeretnék karbantartót kérni fóliázó géphez. April 2, 2025 at 10:22 PM, Boromisza Zoltán : Kész April 3, 2025 at 2:54 AM April 3, 2025 at 2:54 AM, Horváth Adriàn : @Denkó Jani (F.A.) 9es AGV az 1es sor elött megàllt ACS hibával. April 3, 2025 at 2:54 AM, FA CS AGV David 데이비드 : Ok I'm coming April 3, 2025 at 2:59 AM, FA CS AGV David 데이비드 : Solved April 3, 2025 at 3:33 AM, Denkó Jani (F.A.) : Thank you bro 💪🏻🫶🏻 April 3, 2025 at 6:56 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4: Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 3, 2025 at 7:57 AM, FACS_JaewonShin : ■ 3rd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 3, 2025 at 8:25 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 북측 모듈 M0STK033 1F M0CNV033_P06_BP01 컨베이어 정지상태여서 제품 배출이 되지않고 있습니다 확인 부탁드립니다 April 3, 2025 at 8:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician North module M0STK033 1F M0CNV033_P06_BP01 The conveyor is stopped, so the product is not discharged. Please check. April 3, 2025 at 8:28 AM, FACS_Hyeongi Son : 이동하겠습니다 April 3, 2025 at 8:39 AM, FACS_Hyeongi Son : 조치했습니다 April 3, 2025 at 9:47 AM, Roland : Hello. M0CNV022-CV16 Product detect error. Can you check it please? Thank you April 3, 2025 at 9:54 AM, Csepi Árpád : Solved April 3, 2025 at 10:54 AM, Shakir (MCS) : @FA @Csepi Árpád Please check M0STK023_C01 there is CRANE FORK right collapse detect 1 alarm and causing some jobs getting delayed. Thank you very much! April 3, 2025 at 11:14 AM, Csepi Árpád : Solved April 3, 2025 at 11:14 AM, Shakir (MCS) : Thank you April 3, 2025 at 12:22 PM, Alexandra : 2f CV037 stop detect error April 3, 2025 at 12:48 PM, Brázik János : Solved April 3, 2025 at 1:53 PM, Roland : M0STK028 - Crane fork left error. Can you check it please? April 3, 2025 at 1:54 PM, Roland : M0STK025 - Crane fork right error April 3, 2025 at 1:55 PM, Shakir (MCS) : @Fa Also check M0STK025, Crane fork right wide error. Thank you April 3, 2025 at 2:00 PM, Csepi Árpád : Solved April 3, 2025 at 2:19 PM, Brázik János : Solved April 3, 2025 at 2:39 PM, Maczó Anikó : Sziasztok 2 emeleten cv003 work data error Cv003 stop detect error April 3, 2025 at 2:39 PM, Maczó Anikó : Köszönöm April 3, 2025 at 2:46 PM, Csepi Árpád : Solved April 3, 2025 at 3:02 PM, Roland : M0STK028 Double cargo error. Can you check it, please? Thanks! April 3, 2025 at 3:16 PM, Brázik János : Solved April 3, 2025 at 3:31 PM, Roland : Still not working 🥺 April 3, 2025 at 4:32 PM, Shakir (MCS) : Pallet ID PS22A-2504010005 is waiting on crane STK028. The job has been terminated by OP action. Make a job for stk28 zone 1. Several Job getting delayed. Thank you April 3, 2025 at 5:04 PM, Maczó Anikó : Sziasztok 2 emeleten cv003 work data error Cv003 stop detect error Köszönöm April 3, 2025 at 5:06 PM, Brázik János : Megyek April 3, 2025 at 5:58 PM, Kiara : Sziasztok 2. Emeleten nem megy le az anyag, nem jó a lift. April 3, 2025 at 6:21 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 3, 2025 at 8:27 PM, VK (mcs) : @FA Please check 2F M0CNV023 ports (3527 &3528) Wrapper heater temp alarm April 3, 2025 at 8:28 PM, VK (mcs) : 35028* April 3, 2025 at 8:48 PM, Denkó Jani (F.A.) : Solved April 3, 2025 at 10:36 PM, VK (mcs) : @FA Please check 3rd line module assembly port 30 M3MFA300-P30 Is out of service. Carrier is waiting April 3, 2025 at 10:46 PM, Denkó Jani (F.A.) : That's good, it has raw materials, and that's how production is currently using it. April 3, 2025 at 10:48 PM, VK (mcs) : But we received LR at 22:05 and right now carrier is in CNV port and waiting for that. April 3, 2025 at 11:05 PM, Denkó Jani (F.A.) : that's the problem. April 3, 2025 at 11:06 PM, Denkó Jani (F.A.) : There's a full palette there right now, they haven't even started using it yet, so I won't know what to do with it for a while. April 3, 2025 at 11:07 PM, VK (mcs) : Okay, thanks I will send it back to STK April 3, 2025 at 11:09 PM, Denkó Jani (F.A.) : Thank you April 4, 2025 at 2:05 AM April 4, 2025 at 2:05 AM, VK (mcs) : @FA Please check M0STK023 Crane STK action 5 min time over error! April 4, 2025 at 2:17 AM, Boromisza Zoltán : Solved April 4, 2025 at 6:08 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 4, 2025 at 7:43 AM, 윤성제(Yoon SungJe) : @FA M3MFA300_P22 material is not coming down. Can you check this? CARRIER ID:PS290-2411180057 April 4, 2025 at 7:47 AM, Shakir (MCS) : @FA Please confirm the port M3MFA300_P22 Is it empty or full. In MCS PS290-2411180053 carrier is occupied in this port. Thank you April 4, 2025 at 7:48 AM, N.Gábor F.A. : Checking April 4, 2025 at 7:49 AM, 윤성제(Yoon SungJe) : It's currently empty. April 4, 2025 at 7:50 AM, Shakir (MCS) : Okay, Do you know actual location of this carrier, Is it manually transfer? April 4, 2025 at 7:53 AM, FACS_JaewonShin : ■ 4th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 4, 2025 at 7:53 AM, 윤성제(Yoon SungJe) : It's not there after using all the materials. FA personnel are working on it now. April 4, 2025 at 7:57 AM, Shakir (MCS) : @Fa Please check the M0CNV023_35_038, 2F having carrier is not moving blocking other carrier. Thank you April 4, 2025 at 7:58 AM, N.Gábor F.A. : Checking April 4, 2025 at 8:06 AM, Shakir (MCS) : Issue has been resolved ✅ AGV#02 assigned, on the way to M3MFA300_P22. Thank you April 4, 2025 at 8:07 AM, 윤성제(Yoon SungJe) : Thank you, I checked that the materials are coming in. April 4, 2025 at 10:34 AM, Szabolcs : @FA Please check M0CNV033-RTV-OP#2 CV031 Light Curtain Error. CV033 Light Curtain Error. Thank you. April 4, 2025 at 10:38 AM, N.Gábor F.A. : Checking April 4, 2025 at 1:44 PM, Roland : Hello. M0CNV021-CV015 Div pallet detect and work data error. Can you check it please? April 4, 2025 at 1:57 PM, Dávid F.A. : Solved April 4, 2025 at 8:52 PM, VacziGyula : Sziasztok! 2 emeleten out lift conveyor det error April 4, 2025 at 8:55 PM, Zoltán Harasztia FA : Kész April 4, 2025 at 10:00 PM, VK (mcs) : @FA Please check M0STK022 Crane fork right collapse detect 1 April 4, 2025 at 11:16 PM, VK (mcs) : @FA Do you working on it ? April 4, 2025 at 11:38 PM, Döme György F.A : It's done. The barcode on the pallet had to be adjusted. April 5, 2025 at 5:58 AM April 5, 2025 at 5:58 AM, FA CS AGV Jawad : @Mohammad Amir can you plz check STK011 P06...why crane is not taking pallet S101634 April 5, 2025 at 5:58 AM, duzzaman Md (MCS) : Checking April 5, 2025 at 6:06 AM, duzzaman Md (MCS) : This message was deleted. April 5, 2025 at 6:20 AM, Mohammad Amir : @SCS @FA Please check S101634 located at M0STK011_P06. Everything seems okay from MCS side ✅. At 5:35 port P06 went OOS and after port came to in service at 5:40 , however carrier is still not moving and blocking other carriers, please check it physically. Thank you! April 5, 2025 at 6:20 AM, Mohammad Amir : @FA CS AGV Jawad April 5, 2025 at 6:22 AM, FA CS AGV Jawad : I am already at location.....pallet exists at said port and not moving....Out port is working perfectly... April 5, 2025 at 6:23 AM, FA CS AGV Jawad : 2 AGVs are waiting for unload April 5, 2025 at 6:24 AM, Dávid F.A. : We'll be there soon and solve the problem. April 5, 2025 at 6:26 AM, Mohammad Amir : It is an SCS situation everything is okay from MCS side. ✅ @FA @Dávid F.A. Please check this issue physically,pallet located at M0STK011_P06 and it is not moving and blocking other transfer. Thank you very much! April 5, 2025 at 6:53 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Nagy Zsolt Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 5, 2025 at 6:56 AM, N.Gábor F.A. : @MCS Good morning Can you delete and add new job for this palette? S101634 Currently in M0STK011_P06 April 5, 2025 at 6:56 AM, Mohammad Amir : Good morning, Checking April 5, 2025 at 6:56 AM, N.Gábor F.A. : Thank you April 5, 2025 at 6:59 AM, N.Gábor F.A. : I'll clarify, I'd like to ask for a new job. April 5, 2025 at 7:01 AM, Mohammad Amir : As I checked job for this carrier has been cancelled by Operator at 6:55. I have given the command to the carrier to store in STK12. I am monitoring the process. Thank you! April 5, 2025 at 7:02 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 05 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 5, 2025 at 7:03 AM, N.Gábor F.A. : I see that the job is queued April 5, 2025 at 7:09 AM, Mohammad Amir : I checked for this carrier ,for created job we have received Hack-4 response for storage reply so everything is good from the MCS side. ✅ Please check physically why carrier not moving. And please confirm me is port M0STK011_P12 is empty ? Thank you! April 5, 2025 at 7:10 AM, N.Gábor F.A. : The M0STK011_P12 is empty yes April 5, 2025 at 7:15 AM, Mohammad Amir : For your information, Port M0STK011_P06 is going to Constant OOS from morning since I have created new job at 6:59 port went to OOS constantly. Thank you very much! April 5, 2025 at 7:15 AM, Mohammad Amir : Thank you very much! April 5, 2025 at 7:17 AM, Mohammad Amir : Issue has been resolved ✅. Carriers has started to move. Thank you! April 5, 2025 at 7:18 AM, N.Gábor F.A. : Thank you for your cooperation April 5, 2025 at 7:18 AM, Mohammad Amir : You are welcome! April 5, 2025 at 8:09 AM, Simon Attila : Please check second floor RTV car error Thank you April 5, 2025 at 8:13 AM, Simon Attila : Solved April 5, 2025 at 9:54 AM, Simon Attila : Please check second floor Out lift stopper Time Over error Thank you April 5, 2025 at 9:54 AM, Mohammad Amir : @Dávid F.A. Please check M0CNV023_LF21 there is stopper up/down time over error and it is causing transfer delays. Thank you! April 5, 2025 at 9:55 AM, N.Gábor F.A. : Checking April 5, 2025 at 10:05 AM, N.Gábor F.A. : Done April 5, 2025 at 10:05 AM, Mohammad Amir : Thank you very much! April 5, 2025 at 10:11 AM, N.Gábor F.A. : Your welcome April 5, 2025 at 12:07 PM, N.Gábor F.A. : @Mcs Hello Could you send me this numbered palette to M0CNV036_M02? April 5, 2025 at 12:08 PM, Mohammad Amir : Hello, Sure, please share with me Palette id. Thank you very much! April 5, 2025 at 12:08 PM, N.Gábor F.A. : S101625 April 5, 2025 at 12:08 PM, N.Gábor F.A. : sorry, missed this April 5, 2025 at 12:09 PM, Mohammad Amir : Semmi baj,I am working on it! April 5, 2025 at 12:09 PM, N.Gábor F.A. : Thank you April 5, 2025 at 12:11 PM, Mohammad Amir : Carrier is on the way ✅. Please collect it from the Manual port M02 _M0CNV036. Monitoring the transfer. Thank you very much! April 5, 2025 at 12:11 PM, N.Gábor F.A. : Thank you April 5, 2025 at 12:12 PM, Mohammad Amir : You are welcome! April 5, 2025 at 12:16 PM, Mohammad Amir : Update :- Material S101625 has arrived successfully at M02_CNV036 at 12:15. ✅ Thank you very much! April 5, 2025 at 12:16 PM, N.Gábor F.A. : Thank you April 5, 2025 at 1:24 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK022_C01 there is Double cargo error and because of this one job is getting delayed. Thank you very much! April 5, 2025 at 1:32 PM, N.Gábor F.A. : Checking April 5, 2025 at 1:33 PM, Mohammad Amir : Thank you very much! April 5, 2025 at 1:33 PM, N.Gábor F.A. : @MCS Can you send back to the M0STK034 storage this palette? S101625 Currently is in M0CNV036_M03 April 5, 2025 at 1:36 PM, Mohammad Amir : Working on it. April 5, 2025 at 1:38 PM, Mohammad Amir : Job has been created successfully ✅ Please check MCNV036_M03 there is stop detect error that's why pallet is not moving. Thank you very much! April 5, 2025 at 1:42 PM, N.Gábor F.A. : Now moving Thank you April 5, 2025 at 1:43 PM, Mohammad Amir : Now carrier has started to move ✅. Monitoring the process. Thank you! April 5, 2025 at 1:46 PM, Mohammad Amir : @FA @N.Gábor F.A. Could you please check this ,this error still exists since 13:22. Thank you very much! April 5, 2025 at 1:46 PM, N.Gábor F.A. : Going April 5, 2025 at 1:46 PM, Mohammad Amir : Thank you very much! April 5, 2025 at 1:48 PM, Mohammad Amir : Update:- As requested this carrier has successfully stored in STK034 at 13:48. ✅ Thank you very much! April 5, 2025 at 1:49 PM, N.Gábor F.A. : Thank you very much April 5, 2025 at 1:49 PM, Mohammad Amir : You are welcome! April 5, 2025 at 1:51 PM, N.Gábor F.A. : This message was deleted. April 5, 2025 at 1:52 PM, N.Gábor F.A. : Solved April 5, 2025 at 1:52 PM, Mohammad Amir : Thank you very much, Transfer has resumed. April 5, 2025 at 2:45 PM, FA CS AGV Jawad : Can you plz help at STK012- OP2 inport, there is light curtain error April 5, 2025 at 3:09 PM, Mohammad Amir : @N.Gábor F.A. Please check M0CNV032_P01 there is Stop detect error. Thank you very much! April 5, 2025 at 3:10 PM, N.Gábor F.A. : Checking April 5, 2025 at 3:12 PM, N.Gábor F.A. : Solved April 5, 2025 at 3:13 PM, Mohammad Amir : Thank you very much! April 5, 2025 at 6:15 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(2) Döme György Sarvajcz Ferenc April 6, 2025 at 6:03 AM April 6, 2025 at 6:03 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Szabadi Miklós Kiss Balázs Oláh Andris ———————————— Assembly(5): Nagy Zsolt Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor April 6, 2025 at 9:11 AM, Shakir (MCS) : @FA Please check M0STK023_C01 there is MCP 2F OP light curtain detected error. Thank you very much! April 6, 2025 at 9:12 AM, N.Gábor F.A. : Checking April 6, 2025 at 9:28 AM, Dávid F.A. : @MCS Good morning! I would like to apply for a delivery job! Status M0CNV031_P01 ID:.U018296 sending M0STKSTK031 thank you very much! April 6, 2025 at 9:34 AM, duzzaman Md (MCS) : Please confirm that, you'd like us to create a job to the STK031. We see that it have been terminated several time earlier as per the log. April 6, 2025 at 9:35 AM, duzzaman Md (MCS) : Currently the CNV port is OOS as well. April 6, 2025 at 9:39 AM, Dávid F.A. : Currently CNV031_P01 has the ID:.U018296 April 6, 2025 at 9:40 AM, duzzaman Md (MCS) : Should we create the job. Kindly confirm. April 6, 2025 at 9:41 AM, Dávid F.A. : Yes, I would like to apply for a new job. April 6, 2025 at 9:48 AM, duzzaman Md (MCS) : Job has been created. Carrier is in the way . Thank you April 6, 2025 at 9:49 AM, Dávid F.A. : Thank you very much for your help! April 6, 2025 at 9:51 AM, Shakir (MCS) : The job has been completed successfully carrier stocked M0STK031(0101102). Issue has been resolved now ✅ Thank you April 6, 2025 at 10:31 AM, Shakir (MCS) : @FA Please check M0CNV023_84_026 stop detect error. Thank you April 6, 2025 at 10:39 AM, Dávid F.A. : Solved April 6, 2025 at 4:39 PM, Shakir (MCS) : @Fa Please check M0STK034_C01, Crane STK, time out error. Job getting delayed. Thank you April 6, 2025 at 4:39 PM, N.Gábor F.A. : Checking April 6, 2025 at 6:10 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc April 7, 2025 at 12:43 AM April 7, 2025 at 12:43 AM, FA CS AGV David 데이비드 : @FA can someone please check the OQC port April 7, 2025 at 12:45 AM, Zoltán Harasztia FA : What's wrong with it? April 7, 2025 at 12:51 AM, Zoltán Harasztia FA : I'm here at the OQC port, what exactly should I check? April 7, 2025 at 6:10 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10+2/12(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin, Rácz Dániel --------------- Electrode(4): Kiss Balázs, Szabadi Miklós, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A techn April 7, 2025 at 6:24 AM, Bozó Gyula : Jó reggelt!! Szeretnék segítséget kérni a Modul OQC porthoz! Köszönöm! April 7, 2025 at 7:03 AM, Shakir (MCS) : @FA W000233 carrier at M0CNV023_35_038 is not moving since 06:36 , other carrier are waiting and job is getting delayed (2F). Thank you April 7, 2025 at 7:05 AM, Bozó Gyula : Ismét szeretnék segítséget kérni az OQC porthoz! Köszönöm! April 7, 2025 at 7:11 AM, Shakir (MCS) : Issue has been resolved now ✅ Carriers started to move Thank you @Denkó Jani (F.A.) April 7, 2025 at 7:15 AM, Denkó Jani (F.A.) : @Shakir (MCS) please help M0OQC001 port ,U018278 not moving. Please create jobb ,send for back to M0CNV031_P01 April 7, 2025 at 7:15 AM, Denkó Jani (F.A.) : Thank you April 7, 2025 at 7:16 AM, Shakir (MCS) : Checking April 7, 2025 at 7:18 AM, Shakir (MCS) : Need confirmation! U018278 actual location? In MCS location is NA Thank you April 7, 2025 at 7:19 AM, Denkó Jani (F.A.) : Actual location is M0OQC001 April 7, 2025 at 7:19 AM, Shakir (MCS) : Job exist for this carrier to the destination M0STK031_Z01 April 7, 2025 at 7:20 AM, Denkó Jani (F.A.) : Ok April 7, 2025 at 7:22 AM, Shakir (MCS) : Carrier location has been updated ✅ April 7, 2025 at 7:23 AM, Denkó Jani (F.A.) : Okay, I'm waiting for AGV to pick it up. April 7, 2025 at 7:25 AM, Kiara : Sziasztok. 2:30 óta (F753) CIM Élő jel hiba April 7, 2025 at 7:27 AM, Shakir (MCS) : AGV#05 has been assigned ✅ On the way to pick up the carrier Thank you April 7, 2025 at 7:32 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán 3as sor elött 7es AGV data mismatch. Nézzetek rà pls April 7, 2025 at 7:32 AM, FA/CS/AGV/Taimur : Checking April 7, 2025 at 7:38 AM, FA/CS/AGV/Taimur : Sorted. Thank you April 7, 2025 at 7:42 AM, Denkó Jani (F.A.) : Megoldva 🫡 April 7, 2025 at 7:46 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 07 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 7, 2025 at 7:51 AM, FACS_JaewonShin : ■ 7th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 7, 2025 at 9:11 AM, 윤성제(Yoon SungJe) : @MCS can you find out about this material? PS230-2503290015 M4MFA300 There is no record of that material coming down. April 7, 2025 at 9:11 AM, Shakir (MCS) : Checking April 7, 2025 at 9:17 AM, Shakir (MCS) : There was LR from M4MFA300_P28 at 8:28 , Job created at 8:30 to the destination M4MFA300_P28 from source M0STK026_Z01 Thank you April 7, 2025 at 9:44 AM, Horváth Adriàn : @Denkó Jani (F.A.) gyere pls a 3as sor 1blockhoz April 7, 2025 at 9:45 AM, Denkó Jani (F.A.) : Fél pill April 7, 2025 at 9:46 AM, Horváth Adriàn : Megoldva. Köszii April 7, 2025 at 9:50 AM, 윤성제(Yoon SungJe) : @Choi Inbo/최인보 @최용회 @배병민 (Bae Byoungmin) PM님 지금 3라인 1블럭만 셀 파렛트 입고가 안된채로 계속 들어가는데 확인 가능하실까요? April 7, 2025 at 9:51 AM, Choi Inbo/최인보 : 안녕하세요 현재 증상의 베이스팔렛 id 알려주실 수 있으신가요? April 7, 2025 at 9:55 AM, 최용회 invited 이정미. April 7, 2025 at 9:56 AM, 윤성제(Yoon SungJe) : T701465 T701459 입니다 현재 입고는 수동으로 잡아놓은 상태입니다.. April 7, 2025 at 9:57 AM, 손병훈 : at this pallet (PS230-2503290015) there are no InventoryMoveReport msg from mcs April 7, 2025 at 10:00 AM, 손병훈 : Please check and resend the msg if you can. April 7, 2025 at 10:03 AM, Sazzad Bhai SKon : Pallet PS230-2503290015 has been removed from P28 as PS230-2503290014 arrived there April 7, 2025 at 10:05 AM, 손병훈 : yeah I know I need 1. why that msg was missing 2. Resend that msg to inventory move (wms -> mes & erp) April 7, 2025 at 10:09 AM, Sazzad Bhai SKon : Checking the reason April 7, 2025 at 10:14 AM, 윤성제(Yoon SungJe) : @FA I don't take out the 3-line M3MFA300-P2, P4 empty palette. Can you check it? April 7, 2025 at 10:50 AM, 손병훈 : is it possible to resend the msg? or we need to manually move the inventory ? April 7, 2025 at 10:53 AM, Sazzad Bhai SKon : Please manually move the inventory. *We're still checking the reason for missing report. Thank you April 7, 2025 at 11:03 AM, 배병민 (Bae Byoungmin) : Everything is controlled manually and is now normal. April 7, 2025 at 12:38 PM, 이민호 MINHO : @Sazzad Bhai SKon Hello Please check the pallet ID PS230-2412090042 The info of location on MCS, is missing April 7, 2025 at 12:51 PM, Shakir (MCS) : There is no carrier with this Id in MCS/RTD now however as per last log we received successful reck out report from M0STK028 on 04/02 at 08:35. Thank you April 7, 2025 at 1:06 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán 3-4 közötti alapanyag raktàr CV6 slow detect hibàval àll. Nézzetek rà April 7, 2025 at 1:09 PM, Shakir (MCS) : @FA Please check M0CNV023_35_006 stop detect error. Thank you April 7, 2025 at 1:10 PM, Denkó Jani (F.A.) : Solved April 7, 2025 at 1:10 PM, Denkó Jani (F.A.) : Solved April 7, 2025 at 1:21 PM, Beatrix : Hello. MOCNV021-CV04 Stop detect error. Can you check it please? April 7, 2025 at 1:23 PM, Boromisza Zoltán : Úton April 7, 2025 at 1:28 PM, Boromisza Zoltán : Kész April 7, 2025 at 1:51 PM, FA/CS/AGV/Taimur : @MCS Please sent AGV: 08 with carrier: S101645 and AGV: 05 with carrier: S011656 back to orign as the material is not required as per line members. Thanks April 7, 2025 at 1:51 PM, Sazzad Bhai SKon : Checking April 7, 2025 at 1:52 PM, Sazzad Bhai SKon : They have job. Okay we will delete the job and sent them to origin as per request from operations April 7, 2025 at 1:57 PM, 이민호 MINHO : @Shakir (MCS) I didn't get informed from FA team. I couldn't find any proof about where the pallet was released at. The pallet should be on the rack. @Roland @윤경환 Please check the location of pallet on SCS with FA team April 7, 2025 at 1:58 PM, Sazzad Bhai SKon : Checking April 7, 2025 at 2:03 PM, Sazzad Bhai SKon : On this shelf (0201501).there is an UNKDBS carrier installed on 02/04/2025 00:09 April 7, 2025 at 2:33 PM, (Unknown) : Hy @Denkó Jani (F.A.) 2.e. megállt az anyag a fóliázó előt! Még nem cseréltünk fóliát! Üdv; Niki April 7, 2025 at 2:34 PM, Shakir (MCS) : Check M0CNV023_35_028 wrapper light curtains error. Thnx April 7, 2025 at 2:36 PM, (Unknown) : Anyag se megy le! 😵‍💫 April 7, 2025 at 2:44 PM, Denkó Jani (F.A.) : Solved April 7, 2025 at 2:45 PM, Shakir (MCS) : Thank you April 7, 2025 at 3:02 PM, Shakir (MCS) : @Fa Please Check M0CNV023_35_028 wrapper heater temp alaram Thank you April 7, 2025 at 3:04 PM, Denkó Jani (F.A.) : @(Unknown) indítsd el kérlek April 7, 2025 at 3:05 PM, (Unknown) : Mèg esik lefelé a höfok nem tudom mèg elinditani April 7, 2025 at 3:05 PM, (Unknown) : De meglesz köszi April 7, 2025 at 3:44 PM, (Unknown) : Fóliázógép nem megy és el szakadt a fólia ! Már masodcor! April 7, 2025 at 3:45 PM, Denkó Jani (F.A.) : *másodszor April 7, 2025 at 3:46 PM, Shakir (MCS) : @FA Please check M0STK028 CIM heart beat stop 2! April 7, 2025 at 3:51 PM, Shakir (MCS) : Also check M0STK032 crane stk action timeover error. Thanks April 7, 2025 at 4:00 PM, Farkas Kevin : @Denkó Jani (F.A.) Szia, tudsz nekem segíteni? M28 ból szeretnénk kihozni egy nagy raklapot, de útban van az AGV. April 7, 2025 at 4:01 PM, Denkó Jani (F.A.) : Hali. Hamarosan ott vagyunk 🫡 April 7, 2025 at 4:01 PM, Farkas Kevin : Köszönöm April 7, 2025 at 4:02 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Gondolom összefüggésben van màs problémàval de azért jelzem h nem viszi az üres tàrolókat fel a magasraki. April 7, 2025 at 4:02 PM, Denkó Jani (F.A.) : Nyertél 😉😘 April 7, 2025 at 4:04 PM, Farkas Kevin : M28 elől most elindult, de megfogtam a másikat amíg kiszedjük April 7, 2025 at 4:05 PM, Boromisza Zoltán : Jól gondolod April 7, 2025 at 4:07 PM, Horváth Adriàn : Hàt tudom én. Nem ma kezdtem a szakmàt 🤣😁 April 7, 2025 at 4:24 PM, SKOH2/제조-셀,모듈 출하/김병호 : 북쪽 모듈 완제춤 창고 M0STK032_C01 크레인 정지 상태입니다. 빈더니지 입고 작엊 중이라 확인 부탁드립니다 April 7, 2025 at 4:27 PM, Boromisza Zoltán : Solved April 7, 2025 at 4:28 PM, Denkó Jani (F.A.) : Let's do it, it's hard to go with only 2 people towards 6.. April 7, 2025 at 4:28 PM, Boromisza Zoltán : Kész April 7, 2025 at 4:35 PM, Denkó Jani (F.A.) : @Horváth Adriàn @Shakir (MCS) @(Unknown) @all Solved solved solved 😉🤝 April 7, 2025 at 4:35 PM, Shakir (MCS) : Thank you April 7, 2025 at 4:39 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán pls help line 3. 😁 April 7, 2025 at 4:40 PM, FA/CS/AGV/Taimur : Checking April 7, 2025 at 4:42 PM, Boromisza Zoltán : We ask for a little peace and understanding, we are hiring people. April 7, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 3 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 7, 2025 at 8:04 PM, 승규 (BAEK SEUNGGYU) : @FA 셀 로딩 AGV7번 12번 이동 간섭으로 정지중입니다. 확인 부탁드립니다. April 7, 2025 at 8:04 PM, FA-CS-AGV-Masoud : Coming April 7, 2025 at 8:08 PM, FA-CS-AGV-Masoud : Solved April 7, 2025 at 8:41 PM, VK (mcs) : @FA Please check M0STK028 PLC connection fail. April 7, 2025 at 9:00 PM, Zoltán Harasztia FA : Solved April 7, 2025 at 9:48 PM, Alexandra : 2f in lift floor in position error April 7, 2025 at 9:56 PM, VK (mcs) : @FA Please check M0CNV023 -LF 22 GF stop time over ! April 7, 2025 at 10:03 PM, Zoltán Harasztia FA : Solved April 8, 2025 at 6:07 AM April 8, 2025 at 6:07 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10/12(+1) Tech, 1Sl Overtime(0): Holiday(1+1): Kovács Ágnes, (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyi April 8, 2025 at 7:09 AM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0CNV023_RTV02 there is car l/r carrier set sensor delay error and it causing delays in several jobs. Thank you! April 8, 2025 at 7:10 AM, (Unknown) : Sziasztok 2emelet ferde a paletta a foliázo előtt! April 8, 2025 at 7:11 AM, Denkó Jani (F.A.) : Mindjárt ott vagyunk April 8, 2025 at 7:22 AM, Denkó Jani (F.A.) : Solved April 8, 2025 at 7:23 AM, Boromisza Zoltán : Solved April 8, 2025 at 7:23 AM, Shakir (MCS) : Thank you April 8, 2025 at 8:10 AM, FACS_JaewonShin : ■ 8th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 8, 2025 at 9:39 AM, Shakir (MCS) : @Boromisza Zoltán @FA Please check M0STK028_C01 is OutOfService, Crane auto mode fork not home error. Thank you very much April 8, 2025 at 9:49 AM, Boromisza Zoltán : Okey April 8, 2025 at 9:54 AM, Denkó Jani (F.A.) : Solved April 8, 2025 at 9:54 AM, Boromisza Zoltán : Solved April 8, 2025 at 11:13 AM, 윤성제(Yoon SungJe) : @Shakir (MCS) AGV12에 대한 작업을 변경해 주시겠습니까? 3번 항구 라인에서 STK로 다시 재료를 가져오고 있는데, 왜 이런 일이 발생하는지 확인해 주십시오. April 8, 2025 at 11:18 AM, Sazzad Bhai SKon : I understand, the problem is we received an UR first and before completing the job we received an LR! April 8, 2025 at 11:19 AM, FA/CS/AGV/Taimur : @MCS AGV: 12 is taking carrier: T704550 from inport: M3MFA300_P03 back to stocker. Now AGV: 11 with carrier T704567 is unloading material to same port and creating problem. Please check April 8, 2025 at 11:20 AM, Sazzad Bhai SKon : This is because there is a load request from this port P03 at 10:53 April 8, 2025 at 11:21 AM, Sazzad Bhai SKon : Solution: we will cancel job for LR (T704567) as soon as the UR is completed please press LR April 8, 2025 at 11:22 AM, Shakir (MCS) : The Job for AGV011 has been cancelled now ✅ April 8, 2025 at 11:23 AM, 윤성제(Yoon SungJe) : @mcs Can I put T704550 back in the 3-line 2 block? April 8, 2025 at 11:25 AM, Sazzad Bhai SKon : No, please transfer to the cell buffer STK. Because we received UR for this pallet April 8, 2025 at 11:27 AM, 손병훈 : But it is full pallet and also inventory is moved is it possilble to let this pallet come out first at next LR ? April 8, 2025 at 11:28 AM, 손병훈 : or if LR comes out from cell input port, cancel the job in rtd/mcs , make a job at acs to take that pallet April 8, 2025 at 11:31 AM, Sazzad Bhai SKon : If you need this, you can proceed with manual command April 8, 2025 at 11:37 AM, 손병훈 : It is FA’s job. @윤성제(Yoon SungJe) 주임님 입고포트들어왔다가 나간거 2개 버퍼창고로 다 들어갔나요? April 8, 2025 at 11:38 AM, 윤성제(Yoon SungJe) : 지금 704550은 들어갔는데 배병민pm님에게 빼 달라고 요청했습니다 April 8, 2025 at 11:40 AM, 윤성제(Yoon SungJe) : 704567은 2블럭에 들어갔습니다 April 8, 2025 at 12:00 PM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0STK026 there is MCP GF OP2 light curtain detected error since 11:45. Thank you very much! April 8, 2025 at 12:06 PM, Denkó Jani (F.A.) : Solved April 8, 2025 at 1:01 PM, Farkas Kevin : Sziasztok, 5ös sor végén az OQC panelen erősen szól az alarm April 8, 2025 at 1:01 PM, Denkó Jani (F.A.) : Buzzer stop , please 🙄🫣 April 8, 2025 at 1:02 PM, Denkó Jani (F.A.) : Jövök már 🤝 April 8, 2025 at 1:02 PM, Farkas Kevin : Megvolt :) April 8, 2025 at 2:41 PM, 배병민 (Bae Byoungmin) : @이영혁 paul 부장님 안녕하세요 GF 셀버퍼 후창고쪽 AGV Job이 전부 Cell buffer#2 창고 po_09으로 잡히고 있습니다. Cell buffer#4 창고 적재율이 만재가 아닌 상황인데 이상한부분이 있어 확인 요청드립니다. April 8, 2025 at 2:42 PM, 이영혁 paul : 확인해보겠습니다 April 8, 2025 at 3:23 PM, Horváth Adriàn : @Denkó Jani (F.A.) két AGV összecsattant a line 3-4 közt April 8, 2025 at 3:23 PM, 손병훈 : @배병민 (Bae Byoungmin) 모듈 3,4라인 리프트 앞단 이니셜영역에서 agv끼리 충돌햇습니다 April 8, 2025 at 3:24 PM, Horváth Adriàn : Màr Megjött az erősités.😄 April 8, 2025 at 3:33 PM, 이영혁 paul : m0stk012 14 적재정도를 캐리어 갯수로 소팅하고 있는거 같습니다 박태영 pm과 개선 논의 하겠습니다 April 8, 2025 at 3:37 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 한쪽 포트로 집중되다 보니 AGV 에러가 간헐적 발생중입니다 April 8, 2025 at 3:37 PM, FA/CS/AGV/Taimur : @MCS please assign a job to AGV:02 at module side and please investigate why the job got deleted. Thank you April 8, 2025 at 3:38 PM, FA/CS/AGV/Taimur : @Shakir (MCS) @Sazzad Bhai SKon April 8, 2025 at 3:39 PM, Shakir (MCS) : Please write carrier Id or full agv name Thank you April 8, 2025 at 3:39 PM, Shakir (MCS) : Or Area April 8, 2025 at 3:40 PM, FA/CS/AGV/Taimur : Carrier: Z053715 Area: GF_CELL_BUFFER_MODULE AGV: 02 April 8, 2025 at 3:42 PM, Shakir (MCS) : The job was deleted by OP action at 14:49. April 8, 2025 at 3:45 PM, Shakir (MCS) : There is No agv alarm nothing suspicious in log, after carrier installed OP terminated the Job. Thank you April 8, 2025 at 3:47 PM, FA/CS/AGV/Taimur : @Denkó Jani (F.A.) @Boromisza Zoltán can you please come to Raw Material line 3,4 there is a light curtain problem. April 8, 2025 at 3:48 PM, 배병민 (Bae Byoungmin) : @진재정 과장님 같이 한번 확인 해주세요 April 8, 2025 at 3:51 PM, FA/CS/AGV/Taimur : please sent it to the destination. Thank you April 8, 2025 at 3:51 PM, Shakir (MCS) : On it April 8, 2025 at 3:56 PM, Shakir (MCS) : Job has been initiated agv02 started to move to its destination stk11 Thank you April 8, 2025 at 4:10 PM, Shakir (MCS) : Now AGV02 has been completed job successfully ✅ Thank you April 8, 2025 at 4:24 PM, Boromisza Zoltán : Solved April 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 8, 2025 at 7:51 PM, Zoltán Harasztia FA : @mcs Could you help me? A material was accidentally sent back to the warehouse: PF221-2503310005. I need the command for this one to be deleted. April 8, 2025 at 7:52 PM, VK (mcs) : Checking April 8, 2025 at 7:56 PM, VK (mcs) : Job canceled April 8, 2025 at 7:57 PM, Zoltán Harasztia FA : Thanks April 9, 2025 at 1:30 AM April 9, 2025 at 1:30 AM, Alexandra : 2f in lift gf stop time over, floor in position error April 9, 2025 at 1:32 AM, Zoltán Harasztia FA : Kész April 9, 2025 at 6:18 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13 Overtime (0):- Sick (2):Nagy Zsolt, Kasztel Balázs Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(3): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 9, 2025 at 7:46 AM, Mohammad Amir : @Dávid F.A. Please check M0STK025_C01 there is Crane fork left wide #1 check error and because of this everal jobs are Alternated. Thank you very much! April 9, 2025 at 7:52 AM, N.Gábor F.A. : @MCS Good morning Could you send back to the warehouse this material? U018620 April 9, 2025 at 7:52 AM, Mohammad Amir : Good morning, We are working on it! April 9, 2025 at 7:53 AM, N.Gábor F.A. : Thank you April 9, 2025 at 7:53 AM, Mohammad Amir : You are welcome! April 9, 2025 at 7:54 AM, FACS_JaewonShin : ■ 9th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 9, 2025 at 7:56 AM, Mohammad Amir : Job has started ✅. AGV#3 is started to move. We are monitoring the process. Thank you very much! April 9, 2025 at 7:56 AM, N.Gábor F.A. : Thank you very much! April 9, 2025 at 7:56 AM, Mohammad Amir : Nagyon szivesen! April 9, 2025 at 8:06 AM, Mohammad Amir : Job has been completed successfully at 8:04.✅ Carrier has stored in M0STK033(0201805). Thank you very much! April 9, 2025 at 8:27 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK022_C01 there is Crane fork right collapsed detect 1 Error and it is causing delays in completion of jobs. Thank you very much! April 9, 2025 at 8:38 AM, Muneeb Ur Rehman : @Mohammad Amir please check AGV 18. It has a job for port F4CPM010_P01. However it is stopped without any alarm and reason. Please check April 9, 2025 at 8:39 AM, Mohammad Amir : Checking April 9, 2025 at 8:39 AM, Muneeb Ur Rehman : It is carrying material. T703657 April 9, 2025 at 8:39 AM, Roland : Hello. Can you check M0CNV021-CV15 Work data error, please? Thank you April 9, 2025 at 8:42 AM, N.Gábor F.A. : @MCS Hello could you send back to the warehouse this material? U018587 April 9, 2025 at 8:42 AM, Mohammad Amir : Working on it! April 9, 2025 at 8:42 AM, N.Gábor F.A. : Thank you April 9, 2025 at 8:45 AM, Mohammad Amir : Everything seems good from MCS/RTD end ✅. @ACS @N.Gábor F.A. Please check why AGV#18 is not moving it has job to go to EOL4_P01. Thank you very much! April 9, 2025 at 8:46 AM, Dávid F.A. : Solved April 9, 2025 at 8:46 AM, N.Gábor F.A. : Thank you very much! April 9, 2025 at 8:47 AM, Mohammad Amir : Job has started ✅. AGV#5 is started to move. We are monitoring the process. Thank you very much! April 9, 2025 at 8:47 AM, Mohammad Amir : You are welcome! April 9, 2025 at 8:49 AM, Mohammad Amir : Update :- Issue has been resolved and now AGV#18 has started to move ✅. Material delivery to EOL-4 has been normalized. Thank you! April 9, 2025 at 9:02 AM, Mohammad Amir : Job has been completed successfully at 8:56✅ Carrier has stored in M0STK033(0102303). Thank you very much! April 9, 2025 at 9:07 AM, Mohammad Amir : @FA @N.Gábor F.A. Please Check M0CNV023_35_028 wrapper wrap clip check alarm. Thank you April 9, 2025 at 9:17 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV021_P14 there is Conveyer Run time Over Error. Thank you very much! April 9, 2025 at 9:28 AM, Simon Attila : Please check second floor Wrapper heater cover check error Thank you April 9, 2025 at 9:47 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_RTV003,04 there is RTV Car fiber communication error. Thank you very much! April 9, 2025 at 9:47 AM, N.Gábor F.A. : I'm here Thank you April 9, 2025 at 9:47 AM, Mohammad Amir : Köszönom szepen! April 9, 2025 at 10:38 AM, Atom Yang(MCS/RTD) : Photo April 9, 2025 at 10:38 AM, Atom Yang(MCS/RTD) : 참고 자료 공유합니다. April 9, 2025 at 10:55 AM, 최용회 : 모듈 mes 서버 작업 중이었습니다. 메세지 재전송 가능하실까요? April 9, 2025 at 11:29 AM, Mohammad Amir : @FA @N.Gábor F.A. Please Check M0CNV023_35_028 wrapper heater temp alarm. Thank you April 9, 2025 at 11:29 AM, N.Gábor F.A. : Checking April 9, 2025 at 11:29 AM, Mohammad Amir : Köszönom szepen! April 9, 2025 at 11:42 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV021_P11_BP01 there is Stop Detect Error. Thank you! April 9, 2025 at 11:44 AM, Mohammad Amir : @@FA @N.Gábor F.A. Please Check M0CNV023_35_028 wrapper heater temp alarm occured again. Thank you April 9, 2025 at 11:45 AM, N.Gábor F.A. : I'm already here Need time to heat up April 9, 2025 at 11:45 AM, Mohammad Amir : Alright, Thank you very much! April 9, 2025 at 3:26 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK022_C01 there is MCP GF OP01 Light curtain detect error. Thank you very much! April 9, 2025 at 3:27 PM, N.Gábor F.A. : Checking April 9, 2025 at 6:12 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Nagy Tamás Gégény Dávid Kertész Dani ———————————— Assembly GF(2) Csuti Zoltán Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc April 10, 2025 at 1:27 AM April 10, 2025 at 1:27 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0CNV032_RTV01 OOS, “RTV Car stopper down error time delay” Thank you! April 10, 2025 at 1:29 AM, Zoltán Harasztia FA : Solved April 10, 2025 at 2:04 AM, VacziGyula : Sziasztok! 2 emeleten cv 40 other party is not responding April 10, 2025 at 2:18 AM, Döme György F.A : Kész April 10, 2025 at 6:24 AM, Gábor Vercz : Jó reggelt. Rá tudnátok nézni az OQC port-ra ? Nem jön az AGV a palettákért. Hibaüzenet nincs. Köszi. April 10, 2025 at 6:28 AM, Mohammad Amir : Good morning, Unload Request is getting failed that's why AGV is not coming. Could you please tell me which pallet exists at MO0QC001_P01? April 10, 2025 at 6:29 AM, Gábor Vercz : U018590 April 10, 2025 at 6:30 AM, Mohammad Amir : Working on it!! April 10, 2025 at 6:30 AM, Gábor Vercz : Thank you. April 10, 2025 at 6:31 AM, Mohammad Amir : You are welcome! April 10, 2025 at 6:32 AM, Mohammad Amir : Location has been updated ✅. Working on other issue. Thank you very much! April 10, 2025 at 6:34 AM, Mohammad Amir : Issue has been resolved ✅. Please press Unload Request again. We are monitoring. Thank you! April 10, 2025 at 7:59 AM, FACS_JaewonShin : ■ 10th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 10, 2025 at 8:36 AM, Tóth Gyula : Sziasztok, MOCNV036 M02 Cella kikèrèsnèl megállt a lift. Kèrlek nèzzètek meg. Köszönöm szépen. April 10, 2025 at 8:37 AM, N.Gábor F.A. : Megyünk April 10, 2025 at 8:39 AM, Tóth Gyula : Modul Dock dèli oldal külső raktár April 10, 2025 at 8:41 AM, Szabo Ede Sandor : Sziasztok a OQC port nem küldi vissza a palettákat,kb. 1órája van rajta. Ha lesz időtök légyszives nézzetek rá. Köszönöm April 10, 2025 at 8:44 AM, N.Gábor F.A. : Öhm Üres a port April 10, 2025 at 8:47 AM, Szabo Ede Sandor : Bocsánat oktatáson vagyok,mikor elindultunk.még rajta volt April 10, 2025 at 8:52 AM, duzzaman Md (MCS) : @FA Could you please check M0STK023_C01? There is a reported "Crane fork left wide #1 check error." Thank you for your assistance. April 10, 2025 at 8:52 AM, N.Gábor F.A. : Checking April 10, 2025 at 9:18 AM, 윤성제(Yoon SungJe) : Can you support @FA 3 line P27? April 10, 2025 at 9:19 AM, N.Gábor F.A. : We are in tbm Need some minutes April 10, 2025 at 9:49 AM, duzzaman Md (MCS) : @FA Could you please check M0CN023? A wrapper heater temperature alarm has been active since 9:31. April 10, 2025 at 9:51 AM, Mohammad Amir : ***Location is M0CNV023_35_028 April 10, 2025 at 9:51 AM, N.Gábor F.A. : Checking April 10, 2025 at 6:02 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Nagy Tamás Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc April 10, 2025 at 6:12 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 10 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 10, 2025 at 9:26 PM, VacziGyula : Sziasztok! 2emeleten cv 19 & 18 other party is not responding April 10, 2025 at 9:27 PM, Sarvajcz Ferenc FA : .. Igyekszünk.. April 10, 2025 at 9:42 PM, Döme György F.A : Kész April 10, 2025 at 11:37 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK027_C01 there is CRANE FORK right collapse detect 1 alarm Thank you April 10, 2025 at 11:38 PM, Döme György F.A : Checking April 10, 2025 at 11:48 PM, Döme György F.A : Solved April 11, 2025 at 6:13 AM April 11, 2025 at 6:13 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12(+1) Tech, 1Sl Overtime(0): Holiday(2+1): Rácz Dániel, Czeilinger Krisztián (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Csanálosi Gábor, Böröcz Tamás --------------- Assy GF (2): Pintye Miklós, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 11, 2025 at 7:45 AM, (Unknown) : Reggelt! 2. E raktárból nem tud kijönni az anyag! Üdv:Niki April 11, 2025 at 7:47 AM, Shakir (MCS) : @FA Please check M0CNV023 RTV CAR work data error. Thank you April 11, 2025 at 7:48 AM, Boromisza Zoltán : Okey April 11, 2025 at 7:50 AM, FACS_JaewonShin : ■ 11th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 11, 2025 at 7:52 AM, Denkó Jani (F.A.) : Solved April 11, 2025 at 7:52 AM, Denkó Jani (F.A.) : Kész April 11, 2025 at 8:25 AM, Shakir (MCS) : @FA Please check M0STK023_C01 there is Crane fork left collapse detect 1 Error and it is causing delays in completion of jobs. Thank you very much! April 11, 2025 at 8:33 AM, Boromisza Zoltán : @Boromisza Zoltán @Denkó Jani (F.A.) solved April 11, 2025 at 8:47 AM, Kiara : Sziasztok 2. emeletre szeretnénk kérni karbantartót a hátsó raktárba. April 11, 2025 at 8:52 AM, Boromisza Zoltán : Úton April 11, 2025 at 8:53 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni a Modul OQC porthoz! Köszönöm! April 11, 2025 at 8:56 AM, Denkó Jani (F.A.) : Itt vagyunk April 11, 2025 at 9:04 AM, Denkó Jani (F.A.) : Solved April 11, 2025 at 11:41 AM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0STK022_C01 there is Crane fork right collapse detect 2 Error and it is causing delays in completion of jobs. Thank you very much! April 11, 2025 at 11:44 AM, Szücs Géza FT-B : Please be patient. FA technicians are currently having card problems, their cards are not good anywhere at the moment April 11, 2025 at 11:45 AM, Shakir (MCS) : Alright, thank you for your update April 11, 2025 at 12:34 PM, Boromisza Zoltán : Solved April 11, 2025 at 12:43 PM, Deepu Divan FA-Eng : Dear @Fa Technicians I need a picture of geared motor used in the module conveyor (The name tag) Maker- NISSEI Specification-G3LM-28-30-TXXX Reason for request: Need to know the exact specification(Gear ratio) Thank you @Szücs Géza FT-B please help April 11, 2025 at 1:58 PM, Shakir (MCS) : @FA Please check M0STK021_C01 there is Double cargo error and M0STK022 MCP GF OP1 Light curtain error. because of this one job is getting delayed. Thank you very much! April 11, 2025 at 2:16 PM, Denkó Jani (F.A.) : Solved April 11, 2025 at 2:19 PM, Boromisza Zoltán : Solved April 11, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 11, 2025 at 6:56 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 11 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 11, 2025 at 8:13 PM, FA-CS-AGV-Masoud : @FA Please check Port FOBPM011_P02 April 11, 2025 at 8:19 PM, Csepi Árpád : Check okay! Solved April 11, 2025 at 9:11 PM, VK (mcs) : @FA Please check GF M0CNV032 RTV car stopper #2 down error time delay! April 11, 2025 at 9:20 PM, VK (mcs) : @FA Please check 2F M0STK 028 Crane fork right collapse detect 2 April 11, 2025 at 9:26 PM, Brázik János : Solved April 11, 2025 at 9:36 PM, VK (mcs) : Can you please check it again? Same error April 11, 2025 at 9:46 PM, Brázik János : It's already working April 11, 2025 at 9:51 PM, VK (mcs) : Yes it was solved but again same error with a different carrier happened. April 11, 2025 at 10:12 PM, Brázik János : Solved April 11, 2025 at 10:15 PM, Brázik János : Solved April 11, 2025 at 11:33 PM, VK (mcs) : @FA Please check 1F M0STK021-P11 Carrier is stopped. Destination is M0STK027. April 11, 2025 at 11:54 PM, Alexandra : Sziasztok! Második emeletre szeretnék segítséget kérni, mert a fóliázó gépnél esik le a hőfok. April 11, 2025 at 11:59 PM, Brázik János : Megyünk April 12, 2025 at 12:05 AM April 12, 2025 at 12:05 AM, Csepi Árpád : Íme a fordítás angol nyelvre: Hi! Please check. ID: PS230-2504040020 April 12, 2025 at 12:10 AM, VK (mcs) : The carrier now in the STK27 port 22. Moving to destination. Thx April 12, 2025 at 12:11 AM, Csepi Árpád : Okay April 12, 2025 at 12:18 AM, Csepi Árpád : Solved April 12, 2025 at 3:27 AM, VK (mcs) : @FA Please check GF M0CNV032 RTV car stopper #2 down error time delay! April 12, 2025 at 3:42 AM, Csepi Árpád : Solved April 12, 2025 at 4:29 AM, Csepi Árpád : @VK (mcs) A PLC fault occurred on 1F M0CNV034-RTV! I have requested its repair in the designated group. April 12, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása válto April 12, 2025 at 6:52 AM, Kovács Krisztián : Jó reggelt modul hármas sor alsó burkolatot nem hozza a kis agv. Szeretnénk hozzá szakértőt April 12, 2025 at 6:52 AM, Denkó Jani (F.A.) : Hamarosan érkezünk April 12, 2025 at 7:21 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK022_C01 there is Crane PLC interface Error and it is delaying job. Thank you! April 12, 2025 at 7:37 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV023_35_028 there is Wrapper Heater Temp Alarm. Thank you! April 12, 2025 at 7:53 AM, Boromisza Zoltán : Okey April 12, 2025 at 7:53 AM, Boromisza Zoltán : Solved April 12, 2025 at 7:54 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 7:58 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV023_35_028 there is Wrapper Heater Cover check Alarm. Thank you! April 12, 2025 at 7:59 AM, Mohammad Amir : @Boromisza Zoltán Please check M0STK022_C01 there is Crane PLC interface Error and it is delaying jobs. Thank you! April 12, 2025 at 8:07 AM, Denkó Jani (F.A.) : Solved April 12, 2025 at 8:07 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 8:07 AM, Mohammad Amir : @Denkó Jani (F.A.) April 12, 2025 at 8:26 AM, Boromisza Zoltán : Solved April 12, 2025 at 8:27 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 9:28 AM, Mohammad Amir : @Boromisza Zoltán Please check M0STK021_C01 there is Crane PLC interface Error and it is delaying jobs. Thank you! April 12, 2025 at 9:55 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check this error still exists since 9:21. Because of this error one job is waiting. Thank you very much! April 12, 2025 at 10:05 AM, Denkó Jani (F.A.) : Okés April 12, 2025 at 10:07 AM, Denkó Jani (F.A.) : Solved April 12, 2025 at 10:07 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 11:08 AM, Mohammad Amir : @Boromisza Zoltán Please check M0STK024_C01 there is Crane PLC interface Error and it is delaying jobs. Thank you! April 12, 2025 at 11:24 AM, FACS_TaehyeongJin : Solved April 12, 2025 at 11:28 AM, 배병민 (Bae Byoungmin) : 고생하셨습니다. 감사합니다 April 12, 2025 at 12:00 PM, Mohammad Amir : @Boromisza Zoltán Please check M0STK021_C01 there is Crane fork right collapsed detect 1. Thank you very much! April 12, 2025 at 12:09 PM, Boromisza Zoltán : Okey April 12, 2025 at 12:16 PM, Boromisza Zoltán : Solved April 12, 2025 at 12:17 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 4:01 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Nem kapunk felső burkolat alapanyagot. Gépből és a Buffer portról is elfogyott. Nézzétek meg pls. Igy megàll a sor April 12, 2025 at 4:02 PM, Boromisza Zoltán : Oké megyünk April 12, 2025 at 4:03 PM, Denkó Jani (F.A.) : Az baj April 12, 2025 at 4:03 PM, Boromisza Zoltán : Nem lehet anélkül megoldani ?😆😆 April 12, 2025 at 4:12 PM, Boromisza Zoltán : Kész hamarosan érkezik April 12, 2025 at 4:14 PM, Horváth Adriàn : Mi volt a problematika? April 12, 2025 at 4:27 PM, (Unknown) : @Denkó Jani (F.A.) 2.e nem megy le az anyag 🫣🥹 April 12, 2025 at 4:28 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV023_35_037 it is OOs and it is blocking materials transfer. Thank you! April 12, 2025 at 4:28 PM, Boromisza Zoltán : Megyek April 12, 2025 at 4:28 PM, Boromisza Zoltán : Okey April 12, 2025 at 4:28 PM, Mohammad Amir : Error:- Home Run time Over Error. April 12, 2025 at 4:29 PM, Denkó Jani (F.A.) : Checking April 12, 2025 at 4:50 PM, Boromisza Zoltán : All solved April 12, 2025 at 4:53 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 4:53 PM, Denkó Jani (F.A.) : El volt romolva April 12, 2025 at 5:00 PM, (Unknown) : @Denkó Jani (F.A.) @Boromisza Zoltán a lift MOST szart be végleg! Most 3hónapig nem lesz lift 🥹🫣🤣 Üdv Niki April 12, 2025 at 5:10 PM, Horváth Adriàn : @Denkó Jani (F.A.) romantikàzni akart két AGV elkéne választani őket😆 April 12, 2025 at 5:11 PM, Horváth Adriàn : Pliiiz🫣 April 12, 2025 at 5:11 PM, Boromisza Zoltán : Megyek April 12, 2025 at 5:11 PM, FA CS AGV Jawad : OMW April 12, 2025 at 5:12 PM, Denkó Jani (F.A.) : Shell April 12, 2025 at 5:14 PM, Szücs Géza FT-B : MOL April 12, 2025 at 5:27 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check W000229 located at M0CNV023_35_028 ,it is not moving and blocking materials delivery. Everything is good from MCS/RTD side ✅, please check physically. Thank you very much! April 12, 2025 at 5:34 PM, Mohammad Amir : @Boromisza Zoltán Please check M0STK34_C01 there is double cargo error. Thank you! April 12, 2025 at 5:35 PM, Denkó Jani (F.A.) : Going April 12, 2025 at 5:35 PM, Denkó Jani (F.A.) : Solved April 12, 2025 at 5:35 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 5:38 PM, Boromisza Zoltán : Okey April 12, 2025 at 5:39 PM, Denkó Jani (F.A.) : Maradj , már nyomom April 12, 2025 at 5:40 PM, Denkó Jani (F.A.) : Solved April 12, 2025 at 5:40 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 5:50 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2+2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 12, 2025 at 10:30 PM, VK (mcs) : @FA Please check GF M0CNV032 Stop detect error! April 12, 2025 at 10:50 PM, Brázik János : Solved April 13, 2025 at 4:52 AM April 13, 2025 at 4:52 AM, Maczó Anikó : Sziasztok 2 emeleten wrapper heater cover check April 13, 2025 at 4:53 AM, Csepi Árpád : Okay, check April 13, 2025 at 5:52 AM, Csepi Árpád : @ FA A 2F #2 -Wrapper fűtőszál takaró fedél mozgató munkahenger szorul. További intézkedés szükséges a hiba javításához! April 13, 2025 at 5:52 AM, Csepi Árpád : The 2F #2 Wrapper heating element cover moving cylinder is sticking. Further action is required to fix the issue! April 13, 2025 at 5:53 AM, Csepi Árpád : Thank you very much! April 13, 2025 at 6:08 AM, (Unknown) : Sziasztok jó reggelt a második emeletre karbantartót kèrek szèpen köszönöm April 13, 2025 at 6:20 AM, Denkó Jani (F.A.) : Nemsokára megyünk April 13, 2025 at 6:20 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Fabriczius Gergely, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztá April 13, 2025 at 8:15 AM, Kiara : Sziasztok @Denkó Jani (F.A.) anyag nem jött de a hőfok leesett a fóliázó gépnél :( April 13, 2025 at 8:16 AM, Boromisza Zoltán : Megyünk April 13, 2025 at 8:23 AM, Bozó Gyula : Szeretnék segítséget kérni a Modul OQC porthoz!! Köszönöm!! April 13, 2025 at 10:13 AM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0CNV023_84_027 , 2F Stop detect error. Thank you April 13, 2025 at 10:16 AM, Denkó Jani (F.A.) : Solved April 13, 2025 at 1:13 PM, Shakir (MCS) : @FA Please check M0STK032_C01 Crane STK action 5 min time over error! Thank you April 13, 2025 at 1:20 PM, Boromisza Zoltán : Okey April 13, 2025 at 1:23 PM, Boromisza Zoltán : Solved April 13, 2025 at 4:00 PM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0STK034_C01 Crane STK action 5 min time over error! Thank you April 13, 2025 at 4:02 PM, Boromisza Zoltán : Okey April 13, 2025 at 4:07 PM, Boromisza Zoltán : Solved April 13, 2025 at 6:18 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 6:39 PM, Shahbaz 샤바즈 MCS/RTD : @FA M0STK011 is out of service. Are you working on it? Please take a look. Thank you. April 13, 2025 at 6:42 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 13 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi April 13, 2025 at 7:34 PM, Brázik János : Solved April 13, 2025 at 8:18 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0CNV032_RTV01 OOS, “RTV Car stopper down error time delay” Thank you! April 13, 2025 at 8:25 PM, Csepi Árpád : Solved April 13, 2025 at 10:16 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK032_C01 Crane unload timeout. Thank you April 13, 2025 at 10:20 PM, Csepi Árpád : @Magosi Erik Szia! Szeretnék kérni segítséget a 032 daru bejutáshoz. April 13, 2025 at 10:39 PM, Csepi Árpád : Solved April 13, 2025 at 11:35 PM, Alexandra : 2f cv027 stop detect error April 14, 2025 at 12:05 AM April 14, 2025 at 12:05 AM, Magosi Erik : Ez a probléma miatt az alapanyag szállítás is problémába ütközött a földszinten. @Csepi Árpád rátudnátok nézni? April 14, 2025 at 12:31 AM, FA-CS-AGV-Masoud : @fa Please check port M0CNV023_P32 April 14, 2025 at 12:33 AM, Brázik János : Kész April 14, 2025 at 12:33 AM, Magosi Erik : Köszönöm! April 14, 2025 at 12:34 AM, Magosi Erik : Valaki majd reseteli a hibát a földszinti alapanyag lift hmi-n is? April 14, 2025 at 12:34 AM, Magosi Erik : Ezt is köszi April 14, 2025 at 12:54 AM, Magosi Erik : @Csepi Árpád kitudtok jönni a 4es sorra? April 14, 2025 at 12:54 AM, Magosi Erik : Itt vagyok hátul a modul kitöltés él April 14, 2025 at 12:54 AM, Magosi Erik : *kitöltésnél April 14, 2025 at 12:55 AM, Csepi Árpád : Ok April 14, 2025 at 12:55 AM, Magosi Erik : Egy paletta keresztbe van állva ami menne fel a lifttel April 14, 2025 at 1:01 AM, Csepi Árpád : Solved April 14, 2025 at 1:02 AM, Magosi Erik : Tuank You April 14, 2025 at 1:02 AM, Magosi Erik : Tank April 14, 2025 at 1:02 AM, Magosi Erik : 😀 April 14, 2025 at 2:42 AM, Magosi Erik : @Csepi Árpád légyszives ki tudnátok jönni a 3as sorra? Az egyik agv nem fér el a másiktól. Köszönöm April 14, 2025 at 2:42 AM, FA-CS-AGV-Masoud : Coming April 14, 2025 at 2:45 AM, FA-CS-AGV-Masoud : Solved April 14, 2025 at 3:26 AM, Magosi Erik : Thank You April 14, 2025 at 6:36 AM, Shakir (MCS) : @FA @Döme György F.A Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! April 14, 2025 at 6:38 AM, Shakir (MCS) : This message was deleted. April 14, 2025 at 6:39 AM, Shakir (MCS) : Also please check M0STK023, Crane fork right wide error. Jos is getting delayed. Thank you April 14, 2025 at 6:39 AM, Döme György F.A : Checking April 14, 2025 at 7:15 AM, Döme György F.A : The issue is currently being resolved. Production is not affected, as there is no material movement in that area. April 14, 2025 at 7:18 AM, Shakir (MCS) : Thank you April 14, 2025 at 8:03 AM, 윤성제(Yoon SungJe) : @FA The substance has not come down since am06:20. of M4MFA300_P22. Can you check it? April 14, 2025 at 8:07 AM, Shakir (MCS) : Carrier not come because M0STK23 is OOS. i already informed @FA team Thank you April 14, 2025 at 8:10 AM, 배병민 (Bae Byoungmin) : 보안에서 창고 외부도어를 차단하였습니다. 남측, 북측 창고 외부도어를 출입하면 보안에 적발되어 출입이 불가하여 조치가 안되는 부분입니다. 금일 보안팀과 이부분에 대해 논의예정입니다. 우선 해당 잡을 삭제하고 다른 창고에서 출고할수있을까요? April 14, 2025 at 8:10 AM, Döme György F.A : Yes, crane 23 is currently out of order. We can only access the area through the emergency exit door, which triggers an alert to the security service. Therefore, we are waiting for authorization. April 14, 2025 at 8:20 AM, 윤성제(Yoon SungJe) : Can I delete the job and receive the material to another warehouse? April 14, 2025 at 8:21 AM, Shakir (MCS) : On it April 14, 2025 at 8:23 AM, Shakir (MCS) : Yes, because the carrier still on stk shelf, if you delete it then job will create from alternate warehouse. Thank you April 14, 2025 at 8:24 AM, Mohammad Amir : Should we cancel the job ? And you can press LR again and materials will arrive from in-service warehouse. Thank you very much! April 14, 2025 at 8:24 AM, Mohammad Amir : @윤성제(Yoon SungJe) April 14, 2025 at 8:26 AM, 윤성제(Yoon SungJe) : Please delete the job, I'll try again. April 14, 2025 at 8:26 AM, Mohammad Amir : Alright we are working on it! April 14, 2025 at 8:28 AM, Shakir (MCS) : Job has been cancelled successfully ✅ Press the LR again Thank you April 14, 2025 at 8:30 AM, Shakir (MCS) : This message was deleted. April 14, 2025 at 8:31 AM, Shakir (MCS) : Job has been successfully initiated from alternate warehouse M0STK024. Monitoring further Thank you April 14, 2025 at 8:38 AM, FACS_JaewonShin : ■ 14th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 3 Jin taehyeong Jin jaejeong Kim bareum April 14, 2025 at 8:49 AM, Shakir (MCS) : AGV#01 has been assigned ✅ Carrier on the way Thank you April 14, 2025 at 9:53 AM, Döme György F.A : @mcs Could you please help? The removal order needs to be deleted from port M3MFA300_P16. There was a sensor issue at the port, and the pallet is still empty. Thank you! April 14, 2025 at 9:54 AM, Mohammad Amir : Checking April 14, 2025 at 9:55 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! April 14, 2025 at 9:57 AM, Döme György F.A : Köszönöm szépen! April 14, 2025 at 9:57 AM, Mohammad Amir : Nagyon Szivesen! April 14, 2025 at 9:59 AM, Mohammad Amir : @Döme György F.A Please check M0CNV022_M03 it OOOS and several jobs are waiting. Thank you! April 14, 2025 at 10:00 AM, Döme György F.A : Checking April 14, 2025 at 10:00 AM, Mohammad Amir : RTV error- RTV Carstopper down error time delay. Thank you! April 14, 2025 at 10:23 AM, Döme György F.A : Solved April 14, 2025 at 10:24 AM, Mohammad Amir : Thank you very much! Jobs have been normalized. ✅ April 14, 2025 at 3:24 PM, Mohammad Amir : @FA @Döme György F.A Please check M0STK032_C01 Crane STK action 5 min time over error! Thank you April 14, 2025 at 3:25 PM, Zoltán Harasztia FA : Solved April 14, 2025 at 3:25 PM, Mohammad Amir : Thank you very much! April 14, 2025 at 5:35 PM, Shakir (MCS) : @FA Please M0STK034 is OOS Crane unload timeout. Thank you April 14, 2025 at 5:36 PM, Shakir (MCS) : Please check April 14, 2025 at 5:36 PM, Mohammad Amir : @FA @Döme György F.A Please check M0CNV032_P01 there is stop detect error and it is blocking transfer. Thank you very much! April 14, 2025 at 5:37 PM, Döme György F.A : Checking April 14, 2025 at 5:43 PM, Döme György F.A : Solved April 14, 2025 at 5:46 PM, Mohammad Amir : Thank you very much! April 14, 2025 at 5:47 PM, Döme György F.A : Solved April 14, 2025 at 5:49 PM, Shakir (MCS) : Thank you April 14, 2025 at 5:50 PM, Mohammad Amir : This message was deleted. April 14, 2025 at 6:36 PM, Atom Yang(MCS/RTD) : Photo April 14, 2025 at 6:36 PM, Atom Yang(MCS/RTD) : InventoryMoveReportReply Timeout 공유합니다. April 14, 2025 at 6:52 PM, Choi Inbo/최인보 : 안녕하세요 이 팔렛이 몇라인으로 반송된건지 봐줄 수 있으신가요? April 14, 2025 at 9:03 PM, Atom Yang(MCS/RTD) : PM님, 모듈 조립라인 3라인 3호기로 반송되었습니다. April 14, 2025 at 9:10 PM, Atom Yang(MCS/RTD) : PM님, WMS에서 정상적으로 응답을 보낸 것을 쥐 늦게 확인하였습니다. 금 번 알람 건은 RTD에서 이미 InventoryMove 보고 한 carrier를 재 보고한 경우로 CIM - MCS에서 다시 확인해 보겠습니다. April 14, 2025 at 10:03 PM, 승규 (BAEK SEUNGGYU) : @FA 셀 로딩 AGV12번 ACS Ailve Alarm으로 정지상태입니다. 확인 부탁드립니다 April 14, 2025 at 10:18 PM, 배병민 (Bae Byoungmin) : @Muneeb Ur Rehman Please check. April 14, 2025 at 10:19 PM, Muneeb Ur Rehman : Yes on my way April 14, 2025 at 10:21 PM, Muneeb Ur Rehman : Agv is good now April 15, 2025 at 6:00 AM April 15, 2025 at 6:00 AM, Farkas Tamàs : This message was deleted. April 15, 2025 at 6:03 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: ———————————— Electrode (4) Marsi Gábor Simon Attila Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(2) Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoltán Nagy Tamás Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoltán April 15, 2025 at 8:05 AM, FACS_JaewonShin : ■ 15th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 3 Jin taehyeong Jin jaejeong Kim bareum April 15, 2025 at 9:58 AM, Shakir (MCS) : @FA @Döme György F.A Please check M0CNV036_P011_BP01 there is stop detect error and it is blocking transfer. Thank you very much! April 15, 2025 at 10:00 AM, Döme György F.A : Checking April 15, 2025 at 10:10 AM, Döme György F.A : Solved April 15, 2025 at 10:11 AM, Shakir (MCS) : Thank you April 15, 2025 at 10:22 AM, Shakir (MCS) : @FA Please check M0STK022_C01 there is Crane fork right collapsed detect 1. Thank you very much! April 15, 2025 at 10:39 AM, Döme György F.A : Solved April 15, 2025 at 10:41 AM, Shakir (MCS) : Thank you April 15, 2025 at 10:59 AM, Shakir (MCS) : @FA Please check M0CNV032_RTV01 OOS, “RTV Car stopper down error time delay” Thank you! April 15, 2025 at 5:36 PM, VacziGyula : Sziasztok! 2 emeleten wapper carrier id check alarm April 15, 2025 at 6:20 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "D" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Szabadi Miklós Oláh András ———————————— Assembly(6+1): Zsurbej Zsolt Novák Károly Novák Zoltán Kovács Szabolcs Kasztel Balázs Nagy Zsolt ———————————— Formation/Modul(3): Magyar Balázs Nagy Gábor Martina Dávid ———————————— April 15, 2025 at 6:30 PM, VK (mcs) : @FA Please check North raw material conveyor M0CNV021 -M01 W000102 is not being transferred. April 15, 2025 at 6:35 PM, N.Gábor F.A. : Checking April 15, 2025 at 6:40 PM, N.Gábor F.A. : Could you create a new job for this palette? April 15, 2025 at 6:41 PM, VK (mcs) : Yes sure, but please first cancel job in CCS and then I will do it. April 15, 2025 at 6:41 PM, N.Gábor F.A. : Done April 15, 2025 at 6:44 PM, VK (mcs) : Thank you April 15, 2025 at 6:44 PM, N.Gábor F.A. : Moving Thank you April 15, 2025 at 9:49 PM, Roland invited Ákos (Modul 2.E.). April 15, 2025 at 10:30 PM, 손병훈 : @fa please check line3 p35, p34 p18/19 lwr case input is stopped April 15, 2025 at 10:31 PM, N.Gábor F.A. : Checking April 16, 2025 at 1:44 AM April 16, 2025 at 1:44 AM, N.Gábor F.A. : @Mcs Hello Could you locate me this palette? Z300640 April 16, 2025 at 1:46 AM, VK (mcs) : In MCS also location is NA Last location was STK 11 port 12 April 16, 2025 at 1:52 AM, N.Gábor F.A. : Could you delete the job Z300640? It's already stored in the storage April 16, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(2): Boromisza Zoltán, Pintye Miklós Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Rácz Dániel --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 16, 2025 at 7:56 AM, FACS_JaewonShin : ■ 16th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 16, 2025 at 8:05 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check M0CNV021_P13_BP01 there is Stop detect error and it is blocking transfer. Thank you! April 16, 2025 at 8:22 AM, Mohammad Amir : @FA @Rácz Dániel / FA Please check this issue still exists since 8:02 and because of this issue job for pallet PF220-2503290035 is not moving. Thank you very much! April 16, 2025 at 8:22 AM, Denkó Jani (F.A.) : Checking April 16, 2025 at 8:23 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 8:33 AM, Rácz Dániel / FA : Solved April 16, 2025 at 8:33 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 8:40 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Could you please check M0CNV021_RTV01 ,it has frozen without error and because of this materials delivery has stopped. Everything is good ftom MCS/RTD end ✅. Please check physically. Thank you very much! April 16, 2025 at 8:42 AM, Denkó Jani (F.A.) : Manual material removal is taking place, RTV is waiting for operators, thank you for your attention 😁 April 16, 2025 at 8:42 AM, Mohammad Amir : Thank you very much for the information! April 16, 2025 at 9:02 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK011_C01 there is Crane unload timeout error. Thank you! April 16, 2025 at 9:19 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) @Rácz Dániel / FA Please check this error on priority cause because of this error job for EOL #4 is pending. Thank you very much! April 16, 2025 at 9:23 AM, Mohammad Amir : @FACS_JaewonShin Sir, Could you please check M0STK011_C01 there is Crane PLC interface Error and because of this job for EOL#4 line is pending for 22 minutes. Thank you very much! April 16, 2025 at 9:24 AM, FACS_JaewonShin : Yeongmin lee will go eol4 April 16, 2025 at 9:24 AM, Mohammad Amir : Thank you very much Sir! April 16, 2025 at 9:25 AM, Mohammad Amir : @FA @Rácz Dániel / FA Please check M0STK022_C01 there is MCP GF OP01 Light Curtain detect error. Thank you! April 16, 2025 at 9:32 AM, Mohammad Amir : Thank you very much Sir. Issue in M0STK011 has been resolved and Now empty pallet delivery to EOL#4 has been normalized and pallet T703966 on the way. ✅ April 16, 2025 at 9:33 AM, FACS_Youngmin LEE : done👍 April 16, 2025 at 9:33 AM, Mohammad Amir : Thank you very much Sir! April 16, 2025 at 9:39 AM, Mohammad Amir : @Rácz Dániel / FA Please check M4MFA300_P04 it is OOS and one job is Alternated cause of this. Thank you! April 16, 2025 at 9:41 AM, Denkó Jani (F.A.) : Solved April 16, 2025 at 9:41 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 9:53 AM, Rácz Dániel / FA : Currently no production. April 16, 2025 at 9:54 AM, Mohammad Amir : There is a job exists for this port ,should I cancel it in this case ? Carrier is still in the STK. Thank you very much! April 16, 2025 at 9:54 AM, 손병훈 : yes plz April 16, 2025 at 9:55 AM, Mohammad Amir : Job has been cancelled successfully ✅ Thank you very much! April 16, 2025 at 9:56 AM, FA CS AGV Jawad : Can someone plz help to remove pallets at End product near packing line..??? AGV detects OSD April 16, 2025 at 9:57 AM, FA CS AGV Jawad : Asap April 16, 2025 at 9:59 AM, Roland : Hello. Could you check itM0CNV021 - CV15 DIV Up/Down Time over error, please? Thank you. April 16, 2025 at 10:01 AM, Mohammad Amir : This message was deleted. April 16, 2025 at 10:02 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! April 16, 2025 at 10:05 AM, Mohammad Amir : @FA @Rácz Dániel / FA Please check M0STK022_P02 is OOS and it is blocking transfers. Thank you! April 16, 2025 at 10:06 AM, Rácz Dániel / FA : Also April 16, 2025 at 10:06 AM, 윤성제(Yoon SungJe) : @FA 5라인 앞 AGV 9번을 옮기고 싶습니다 도와주실 수 있으신가요? April 16, 2025 at 10:06 AM, Duna Don : Checking April 16, 2025 at 10:16 AM, FA CS AGV Jawad : @Mohammad Amir . April 16, 2025 at 10:16 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 10:21 AM, Denkó Jani (F.A.) : Solved April 16, 2025 at 10:22 AM, Denkó Jani (F.A.) : Solved April 16, 2025 at 10:22 AM, FA CS AGV Jawad : Thanks @Denkó Jani (F.A.) April 16, 2025 at 10:25 AM, Denkó Jani (F.A.) : Solved April 16, 2025 at 10:25 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 10:32 AM, Roland : Visszajott a hiba ujra 🥺 April 16, 2025 at 10:33 AM, Denkó Jani (F.A.) : Solved April 16, 2025 at 10:33 AM, Denkó Jani (F.A.) : Megyünk April 16, 2025 at 10:33 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 10:36 AM, Denkó Jani (F.A.) : @FACS_JaewonShin @FACS_TaehyeongJin @FACS_Hyeongi Son @FACS_Youngmin LEE It happened several times in half an hour, the solution is to reset-start... please look into it because I think this must be a program error April 16, 2025 at 10:37 AM, FACS_Hyeongi Son : @Denkó Jani (F.A.) This problem? April 16, 2025 at 10:39 AM, Denkó Jani (F.A.) : Hello. Could you check itM0CNV021 - CV15 DIV Up/Down Time over error, please? Thank you. April 16, 2025 at 10:39 AM, Denkó Jani (F.A.) : This April 16, 2025 at 10:41 AM, FACS_Hyeongi Son : Okii i’ll check it April 16, 2025 at 11:07 AM, Roland invited Niki (Modul). April 16, 2025 at 12:32 PM, Mohammad Amir : @FA @Rácz Dániel / FA Please check M0STK022_P02 is OOS again and it is blocking transfer for PS230-2504100124. Thank you! April 16, 2025 at 12:33 PM, Rácz Dániel / FA : OmV April 16, 2025 at 12:33 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 12:44 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV021_RTV01 there is car return to origin Error. Thank you! April 16, 2025 at 12:46 PM, Rácz Dániel / FA : Yes, we here checkin. April 16, 2025 at 12:46 PM, Rácz Dániel / FA : G April 16, 2025 at 12:57 PM, Rácz Dániel / FA : Solved April 16, 2025 at 12:57 PM, Rácz Dániel / FA : Solved April 16, 2025 at 12:58 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 2:16 PM, Niki (Modul) : @Denkó Jani (F.A.) 2. E. Anyag nem megy el,de be se jön! April 16, 2025 at 2:16 PM, Denkó Jani (F.A.) : Az baj April 16, 2025 at 2:16 PM, Niki (Modul) : Sorfalat állítanak a kis drágák 😪 April 16, 2025 at 2:17 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV023_82_003 there is Work data error. Thank you very much! April 16, 2025 at 2:18 PM, Mohammad Amir : @Denkó Jani (F.A.) please check M0CNV023_35_029 material located at this Port is not moving and blocking materials transfer. Thank you very much! April 16, 2025 at 2:22 PM, Denkó Jani (F.A.) : Yes,I know. On my way April 16, 2025 at 2:22 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 2:24 PM, Denkó Jani (F.A.) : All solved bro 💪🏻 April 16, 2025 at 2:25 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 2:35 PM, Niki (Modul) : @Rácz Dániel / FA Hátsó raktából nem jön az anyag April 16, 2025 at 2:37 PM, Denkó Jani (F.A.) : Megyünk már April 16, 2025 at 2:47 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK021_C01 there is Double Storage issue and it is causing several transfer to be delayed. Thank you! April 16, 2025 at 2:54 PM, Denkó Jani (F.A.) : Oks April 16, 2025 at 2:56 PM, Mohammad Amir : @FA @Denkó Jani (F.A.) There is one job created for M4MFA300_P35 ,but P35 is OOS that's why it is not moving. Do you have production for this line and port now ? It is an automatic job. Thank you very much! April 16, 2025 at 2:57 PM, Denkó Jani (F.A.) : yes, there is production there. we will see soon, we just have to go to many places over long distances... please be patient April 16, 2025 at 2:58 PM, Mohammad Amir : I understand,Thank you very much. April 16, 2025 at 3:13 PM, Denkó Jani (F.A.) : Solved April 16, 2025 at 3:13 PM, Mohammad Amir : @Rácz Dániel / FA Please check M0CNV023_RTV03 ,there is RTV car stopper down time it is causing material delivery blockage. Thank you! April 16, 2025 at 3:13 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 3:16 PM, Niki (Modul) : @Denkó Jani (F.A.) 2. Emelet...ugyanaz a probléma,nem megy az anyag April 16, 2025 at 3:16 PM, Mohammad Amir : For you information:- RTV03_M0CNV023 is OOS and because of this you are witnessing this situation,I already informed FA team ,they are working on it. Thank you! April 16, 2025 at 3:19 PM, Denkó Jani (F.A.) : This port is empty and now autó,maybe solved April 16, 2025 at 3:20 PM, Mohammad Amir : Thank you very much,yes issue has been resolved. ✅ April 16, 2025 at 3:22 PM, Denkó Jani (F.A.) : Is there a task for these ports? If so, please delete it, thank you April 16, 2025 at 3:24 PM, Mohammad Amir : Okay on it. April 16, 2025 at 3:27 PM, Mohammad Amir : I have cancelled the Job for this Port and send the carrier back to its source warehouse. ✅ Thank you very much! April 16, 2025 at 3:30 PM, Denkó Jani (F.A.) : Thank you April 16, 2025 at 3:30 PM, Mohammad Amir : You are welcome! April 16, 2025 at 3:30 PM, Denkó Jani (F.A.) : Solved April 16, 2025 at 3:30 PM, Mohammad Amir : Thank you very much, material delivery seems to be normalised now ✅. April 16, 2025 at 3:34 PM, Mohammad Amir : @Denkó Jani (F.A.) @FA We are receiving UR request from M4MFA300_P17 but it not being able to completed because this Port is OOS. Thank you! April 16, 2025 at 3:38 PM, Mohammad Amir : @Denkó Jani (F.A.) This issue has been resolved ✅. Thank you! April 16, 2025 at 3:39 PM, Denkó Jani (F.A.) : M4MFA300 all not produces April 16, 2025 at 4:09 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK023_C01 there is CRANE fork left collapse detect 1 error. Thank you! April 16, 2025 at 4:21 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300 P19 collection job is not being created April 16, 2025 at 4:21 PM, Mohammad Amir : Checking Sir! April 16, 2025 at 4:23 PM, Denkó Jani (F.A.) : M4MFA300 all not produces April 16, 2025 at 4:25 PM, Mohammad Amir : This message was deleted. April 16, 2025 at 4:25 PM, 승규 (BAEK SEUNGGYU) : It's been resolved. Thanks April 16, 2025 at 4:43 PM, Denkó Jani (F.A.) : I would like to ask for help with M0STK023, the cargo is very high up and the pallet label is hanging out. We did not receive permission to climb the crane. Immediate action is required. April 16, 2025 at 4:44 PM, Denkó Jani (F.A.) : @FACS_JaewonShin @FACS_TaehyeongJin @FACS_Hyeongi Son @FACS_Youngmin LEE April 16, 2025 at 4:45 PM, FACS_Hyeongi Son : I‘m going April 16, 2025 at 4:46 PM, Denkó Jani (F.A.) : Thank you April 16, 2025 at 5:17 PM, FACS_Hyeongi Son : Solved April 16, 2025 at 5:18 PM, Denkó Jani (F.A.) : Thank you for helping 🤝 April 16, 2025 at 5:18 PM, FACS_Hyeongi Son : szívesen April 16, 2025 at 6:12 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 16, 2025 at 7:51 PM, Alexandra : 2F out lift conveyor det. error April 16, 2025 at 7:56 PM, Csepi Árpád : Solved April 16, 2025 at 11:04 PM, Maczó Anikó : Sziasztok 2 emeleten a foliázonál le eset a hő fok April 16, 2025 at 11:04 PM, Csepi Árpád : Megyünk April 16, 2025 at 11:23 PM, Csepi Árpád : Elkészült! April 16, 2025 at 11:51 PM, Maczó Anikó : 2 emeleten cv003 work data error Cv003 stp detect error April 17, 2025 at 12:01 AM April 17, 2025 at 12:01 AM, Csepi Árpád : Solved April 17, 2025 at 6:15 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 8/12 Tech, 1Sl Overtime(0): Holiday(2): Csanálosi Gábor, Pintye Miklós Sick(1): Gerbovits Kevin, kovács Ágnes --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Rácz Dániel, Böröcz Zamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 17, 2025 at 6:21 AM, Shakir (MCS) : @FA @Denkó Jani (F.A.) Please check M0STK034_C01, Crane shelf in abort (Double cargo) Thank you April 17, 2025 at 6:44 AM, Denkó Jani (F.A.) : Solved April 17, 2025 at 6:44 AM, Shakir (MCS) : Thank you very much April 17, 2025 at 7:22 AM, Kovács Kármen : @Denkó Jani (F.A.) @Boromisza Zoltán Sziasztok! Egyes sor előtt probléma van az #7-es AGV-vel. Nézzetek rá légyszi. Köszi April 17, 2025 at 7:22 AM, FA/CS/AGV/Taimur : Checking April 17, 2025 at 7:37 AM, FA/CS/AGV/Taimur : Solved, Thanks April 17, 2025 at 8:02 AM, FACS_JaewonShin : ■ 17th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 17, 2025 at 8:54 AM, 이민호 MINHO : Dear, FA team Please release 2 pallets to the port, M0CNV022_M03 or M04 UNKDUP-PS22A-2504030047A-2 UNKDUP-PS22A-2504030047B-1 @Roland Please correct the issue with FA team. April 17, 2025 at 10:21 AM, Roland : Hello. Could you check M0CNV022 - CV012 and 009 RTV STK Alive Signal Error, please? Thank you! April 17, 2025 at 10:41 AM, Shakir (MCS) : @Boromisza Zoltán @FA Please check M0STK028_C01 there is Crane PLC interface Error and it is delaying jobs. Thank you! April 17, 2025 at 10:51 AM, Denkó Jani (F.A.) : Solved April 17, 2025 at 10:51 AM, Denkó Jani (F.A.) : Solved April 17, 2025 at 11:04 AM, Choi Inbo/최인보 invited 전효철. April 17, 2025 at 12:58 PM, 이민호 MINHO : 해당 팔렛 SCS 에서 출고 처리 가능하신 분 계실까요? April 17, 2025 at 12:59 PM, 배병민 (Bae Byoungmin) : 어디로 출고하면 될까요? April 17, 2025 at 12:59 PM, 배병민 (Bae Byoungmin) : 위 요청 위치로 보내드리면 될까요? April 17, 2025 at 1:01 PM, 이민호 MINHO : 네 피엠님 감사합니다! April 17, 2025 at 1:10 PM, 배병민 (Bae Byoungmin) : 네 지금 반송중입니다 April 17, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician, 1 Sl, ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 9:50 PM, Maczó Anikó : Sziasztok 2 emeletre karbantartott kérünk hibát nem jelez de az anyag meg állt köszönöm April 17, 2025 at 10:40 PM, Magosi Erik : @Csepi Árpád kitudnátok pliiz jönni a 3as sor alapanyag lifthez? Köszi April 17, 2025 at 10:40 PM, Magosi Erik : Hmi-n láthatjátok a hiba üzit April 17, 2025 at 11:49 PM, Magosi Erik : @Csepi Árpád kitudátok jönni a 3as sor P35-ös porthoz? Köszi April 18, 2025 at 12:38 AM April 18, 2025 at 12:38 AM, Maczó Anikó : Sziasztok 2 emeleten floor in position error Gf stop time over Köszönöm April 18, 2025 at 12:41 AM, Csepi Árpád : Készen van! April 18, 2025 at 5:06 AM, Alexandra : 2f in lift gf stop time over, floor in position error April 18, 2025 at 5:28 AM, Csepi Árpád : Solved April 18, 2025 at 6:16 AM, Shakir (MCS) : Good morning @FA Please check M0STK021, Crane Unload timeout error and M0CNV031_P15_BP01 Stop detect error. Few jobs delaying. Thank you April 18, 2025 at 6:22 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 + 2 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(4) Gégény Dávid Fabricius Gergő Nagy Tamás Kertész Dani ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Böröc Tomi ———————————— Formation/Modul(4) Döme György Harasztia Zoltán Sarvajcz Ferenc Boromissza Zoltán April 18, 2025 at 6:23 AM, Zoltán Harasztia FA : Solved April 18, 2025 at 6:23 AM, Shakir (MCS) : Thank you April 18, 2025 at 8:09 AM, FACS_JaewonShin : ■ 18th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 18, 2025 at 6:17 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (3):Csanálosi Gábor, Nagy Tibor, Céhman Zsolt, Sick (0):- Holiday (1):- Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András, Kiss Balázs, Céhman Zsolt Assembly(8): GF: Novák Zoltán, Kovács Szabolcs, Csanálosi Gábor, Zsurbej Zsolt 1F:Nagy Zsolt, Novák Károly, Kasztel Balázs, Nagy Tibor Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 18, 2025 at 9:30 PM, Nemes Patrik : (Rtv car error ) Raktárból kifele megállt a kocsi April 19, 2025 at 6:05 AM April 19, 2025 at 6:05 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: ———————————— Electrode (4) Marsi Gábor Simon Attila Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(2) Gégény Dávid Kertész Dani ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Nagy Tamás ———————————— Formation/Modul(2) Döme György Harasztia Zoltán April 19, 2025 at 6:05 AM, Mohammad Amir : @FA Please check M0STK024_C01 there crane ankle left detect error. Thank you! April 19, 2025 at 7:00 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 19 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 19, 2025 at 7:14 AM, Mohammad Amir : @FA @Döme György F.A Please check M0STK022_C01 there crane ankle right detect error. Thank you! April 19, 2025 at 7:17 AM, Zoltán Harasztia FA : Solved April 19, 2025 at 7:17 AM, Mohammad Amir : Thank you very much! April 19, 2025 at 7:54 AM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK021_C01 there crane ankle left detect error. Thank you! April 19, 2025 at 7:59 AM, Zoltán Harasztia FA : Solved. A bird is flying into the sensors, that's what's causing all these warehouse errors. April 19, 2025 at 8:00 AM, Mohammad Amir : Okay , thank you very much for the information! April 19, 2025 at 8:00 AM, Zoltán Harasztia FA : You're welcome. April 19, 2025 at 8:35 AM, Mohammad Amir : @Zoltán Harasztia FA Could you please check M3MFA300_P06 it OOS and because of it,one job is pending. Thank you very much! April 19, 2025 at 8:41 AM, Döme György F.A : The local maintenance team is working on it. The port is in manual mode. April 19, 2025 at 8:42 AM, Mohammad Amir : Thank you very much for the information! April 19, 2025 at 10:26 AM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK031 _C01 there crane ankle left detect error. Thank you! April 19, 2025 at 10:29 AM, Zoltán Harasztia FA : Solved April 19, 2025 at 10:30 AM, Mohammad Amir : Thank you very much! April 19, 2025 at 12:42 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK034/35 _C01 there crane ankle left detect error. Thank you! April 19, 2025 at 1:31 PM, Mohammad Amir : This message was deleted. April 19, 2025 at 1:32 PM, Mohammad Amir : @FA @Döme György F.A Please check M0STK035_C01 there crane ankle right detect error. Thank you! April 19, 2025 at 1:38 PM, Zoltán Harasztia FA : Solved April 19, 2025 at 1:38 PM, Mohammad Amir : Thank you very much! April 19, 2025 at 1:59 PM, Krisztian Bozor invited András. April 19, 2025 at 3:33 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK027_C01 there is MCP GF Light Curtain detected error. Thank you very much! April 19, 2025 at 3:33 PM, Mohammad Amir : @Döme György F.A Please check M0STK25 _C01 there is CRANE ankle left detect error. Thank you very much! April 19, 2025 at 3:36 PM, Mohammad Amir : This message was deleted. April 19, 2025 at 3:37 PM, Mohammad Amir : This message was deleted. April 19, 2025 at 3:37 PM, Mohammad Amir : @Döme György F.A @Zoltán Harasztia FA Please check M0STK34_C01 there is CRANE ankle left detect error. Thank you very much! April 19, 2025 at 3:48 PM, 배병민 (Bae Byoungmin) : A bird has entered the warehouse. I need to get it out...ㅜㅜ April 19, 2025 at 3:58 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0CNV023_83_013 there is Work Data Error. Thank you! April 19, 2025 at 3:59 PM, Döme György F.A : I'm going there now. April 19, 2025 at 4:00 PM, Mohammad Amir : Thank you very much 🙏! April 19, 2025 at 4:03 PM, Döme György F.A : Done April 19, 2025 at 4:49 PM, Mohammad Amir : @Döme György F.A Please check M0STK027_C01 there is Double cargo error and it is blocking transfer. Thank you! April 19, 2025 at 4:58 PM, Zoltán Harasztia FA : Solved April 19, 2025 at 4:59 PM, Mohammad Amir : Jobs has been normalized ✅. Thank you very much! April 19, 2025 at 5:28 PM, Mohammad Amir : @Döme György F.A Please check M0STK026_C01 there is Crane fork right collapsed detect 1 Error and jobs are pending because of it. Thank you very much! April 19, 2025 at 5:31 PM, Döme György F.A : Checking April 19, 2025 at 5:40 PM, Döme György F.A : Solved April 19, 2025 at 5:40 PM, Mohammad Amir : Thank you very much! April 19, 2025 at 5:40 PM, Döme György F.A : Szívesen April 19, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(5): Novák Zoltán, Kovács Szabolcs, Zsurbej Zsolt, Nagy Zsolt, , Kasztel Balázs, Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 19, 2025 at 7:21 PM, N.Gábor F.A. : @MCS Good afternoon I would like to request that the materials on these ports be sent back to the warehouse. The materials on each port are full, but for some reason they don't appear to be here in the mes system. M3MFA300_P32; M3MFA300_P33; M3MFA300_P34 April 19, 2025 at 7:22 PM, VK (mcs) : Checking April 19, 2025 at 7:22 PM, N.Gábor F.A. : Thank you April 19, 2025 at 7:25 PM, VK (mcs) : UR received and reply is : pallet is ready. Waiting for LR job from gantry port. April 19, 2025 at 7:27 PM, N.Gábor F.A. : Yes, but in the story the data is not included here and thus the unloading from the port does not take place. That is why I asked you to send the materials back to the warehouse. April 19, 2025 at 7:31 PM, VK (mcs) : I see, inventory report reply is: An error occurred in MES. Okay I will send them April 19, 2025 at 7:31 PM, N.Gábor F.A. : Thank you April 19, 2025 at 7:37 PM, VK (mcs) : @FA Please check M0STK028 Crane ankle right detect error! April 19, 2025 at 7:38 PM, N.Gábor F.A. : Checking April 20, 2025 at 12:52 AM April 20, 2025 at 12:52 AM, VK (mcs) : @FA Please check M0STK021 MCP GF OP2 light curtain detect error. April 20, 2025 at 12:53 AM, N.Gábor F.A. : Checking April 20, 2025 at 5:03 AM, VK (mcs) : @FA Please check M0STK038 Crane ankle left detect error! April 20, 2025 at 5:04 AM, N.Gábor F.A. : Checking April 20, 2025 at 6:14 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 13 + 1 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 1 ———————————— Electrode (4) Marsi Gábor Simon Attila Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(3) Gégény Dávid Kertész Dani Fabricius Gergő ———————————— Assembly GF(4) Csuti Zoltán Lajos Gábor Nagy Tamás Nagy Tibor ———————————— Formation/Modul(3) Döme György Harasztia Zoltán Sarvajcz Ferenc April 20, 2025 at 6:24 AM, Mohammad Amir : @FA @Döme György F.A Please check M0STK028_C01 there crane ankle right detect error. Thank you! April 20, 2025 at 7:13 AM, Mohammad Amir : @Döme György F.A @Zoltán Harasztia FA Please check M0STK34_C01 there is CRANE ankle left detect error and because of this some jobs are pending. Thank you very much! April 20, 2025 at 7:16 AM, Zoltán Harasztia FA : Solved April 20, 2025 at 7:16 AM, Mohammad Amir : Thank you very much! April 20, 2025 at 8:07 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK014_P09 there is AGV PIO error and it is blocking transfers. Thank you very much! April 20, 2025 at 8:08 AM, Döme György F.A : Solved April 20, 2025 at 8:09 AM, Mohammad Amir : This message was deleted. April 20, 2025 at 8:09 AM, Mohammad Amir : Thank you very much! Transfer has resumed ✅. AGV#9 on the way for Module -3 _P03 port. April 20, 2025 at 8:41 AM, Döme György F.A : @Mohammad Amir Could you please check? Material was brought to port MFA300_P18 from the warehouse, even though there are pallets available at P34 and P35. Why might it be that the material wasn't taken from there instead? April 20, 2025 at 8:42 AM, Mohammad Amir : This message was deleted. April 20, 2025 at 8:42 AM, Mohammad Amir : Could you please tell me which Module line are you taking about. Thank you very much! April 20, 2025 at 8:43 AM, Mohammad Amir : Is it Line -3(M3MFA300)? Thank you! April 20, 2025 at 8:43 AM, Döme György F.A : M3MFA300 April 20, 2025 at 8:53 AM, Döme György F.A : It also delivers material from the warehouse to port P27. However, there is also a pallet on buffer P25. April 20, 2025 at 8:58 AM, Mohammad Amir : There is an issue with inventory Move Report and Inventory Arrive report . For Both carriers Located at P34 and P35 inventory Move Report was failed . Also for carrier arrived at P18 for this port Inventory arrived report also shows error in MES system. This is the core Reason for the phenomenal you faced. @MES could you please check this phenomena. We are receiving an error from MES side for inventory arrived report for Gantry Port M3MFA300_P18. Thank you very much! April 20, 2025 at 8:58 AM, Mohammad Amir : Checking for this one. April 20, 2025 at 9:03 AM, Döme György F.A : Thank you very much for the information April 20, 2025 at 9:03 AM, Mohammad Amir : Same issue for this one as well. For P25 , Inventory move report was failed as well. And for P27, Inventory arrived report is showing error in MES. @MES please check this issue as well. Thank you very much! April 20, 2025 at 9:03 AM, Mohammad Amir : You are welcome! April 20, 2025 at 9:10 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0CNV023_B02/82_041 there is light curtain error. Thank you very much! April 20, 2025 at 9:20 AM, Zoltán Harasztia FA : Solved April 20, 2025 at 9:20 AM, Mohammad Amir : Thank you very much! April 20, 2025 at 9:27 AM, FA-CS-AGV-Masoud : @Mohammad Amir The job for AGV 1 is terminated in ACS thats why AGV stopped middle of the line The carrier id pf221-2504090025 could you sent it again?? April 20, 2025 at 9:28 AM, Mohammad Amir : Okay,I am sending it back to it's source warehouse. Thank you very much! April 20, 2025 at 9:29 AM, Mohammad Amir : Job Jas started to send it to the source warehouse ✅. Monitoring the transfer. Thank you very much! April 20, 2025 at 9:29 AM, FA-CS-AGV-Masoud : Thanks 🙏 April 20, 2025 at 9:30 AM, Mohammad Amir : You are welcome! April 20, 2025 at 9:45 AM, Mohammad Amir : For you information, Carrier has successfully stored in the STK028(0101008) at 9:44. ✅ Thank you very much! April 20, 2025 at 11:21 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK021_C01 there is MCP GF OP2 Light Curtain detected error. Thank you very much! April 20, 2025 at 11:24 AM, Zoltán Harasztia FA : Solved April 20, 2025 at 11:24 AM, Mohammad Amir : Thank you very much! April 20, 2025 at 4:46 PM, Mohammad Amir : @Döme György F.A Please check M0CNV032_P01 there is Stop detect error and because of this several jobs are Alternated. Thank you! April 20, 2025 at 4:47 PM, Döme György F.A : Checking April 20, 2025 at 4:50 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK014_P09 there is AGV PIO error and it is blocking transfer. Thank you very much! April 20, 2025 at 4:58 PM, Döme György F.A : Solved April 20, 2025 at 4:59 PM, Mohammad Amir : Thank you very much! April 20, 2025 at 5:00 PM, Mohammad Amir : This message was deleted. April 20, 2025 at 5:00 PM, Mohammad Amir : @Döme György F.A For your information this error has already been fixed . Thank you very much! April 20, 2025 at 6:12 PM, VK (mcs) : @FA Please check M0STK022 Crane ankle left detect error! April 20, 2025 at 6:14 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13+3 Overtime (3):Boromisza Zoltán, Csanálosi Gábor, Szűcs Géza Sick (0):- Holiday (0): Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(7): GF: Novák Károly, Kasztel Balázs, Kovács Szabolcs, Csanálosi gábor 1F: Novák Zoltán, Zsurbej Zsolt, Nagy Zsolt Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Boromisza Zoltán April 20, 2025 at 6:15 PM, N.Gábor F.A. : Checking April 20, 2025 at 8:44 PM, 배병민 (Bae Byoungmin) : @KIMYOUNGKWANG 안녕하세요 이반차 FA 배병민PM입니다. 해당 건 한번 확인 가능하실까요? April 20, 2025 at 8:45 PM, 배병민 (Bae Byoungmin) : 전일부터 이와 비슷한 문제가 계속 발생중이라고 합니다 April 20, 2025 at 10:41 PM, KIMYOUNGKWANG : @배병민 (Bae Byoungmin) 3라인 InventoryarrivedReport오류 로그 확인하면 WMS에 존재 하지 않는 BASEPALLET 으로 나옵니다. CARRIERID 확인 되실까요? April 20, 2025 at 10:44 PM, 배병민 (Bae Byoungmin) : @VK (mcs) Can you tell me the carrier ID? April 20, 2025 at 10:45 PM, VK (mcs) : Checking April 20, 2025 at 10:49 PM, VK (mcs) : Port 26 : PF221-2504090048 Port 27: PF221-2504090044 Port 16:PS22A-2504110062 April 20, 2025 at 10:51 PM, KIMYOUNGKWANG : @배병민 (Bae Byoungmin) 3개다 WMS에 없는것으로 나오네요 April 20, 2025 at 10:51 PM, 배병민 (Bae Byoungmin) : thank you so much. April 20, 2025 at 10:51 PM, KIMYOUNGKWANG : 확인부탁드리겠습니다 April 20, 2025 at 10:51 PM, 손병훈 : nothing at P25?? April 20, 2025 at 10:52 PM, 손병훈 : we dont have p16 April 20, 2025 at 10:53 PM, 손병훈 : mes 입고이력은 없나요? April 20, 2025 at 10:53 PM, VK (mcs) : It's gantry April 20, 2025 at 10:53 PM, KIMYOUNGKWANG : WMS에 없는 Pallet Id라서 입고 내역도없습니다 April 20, 2025 at 10:55 PM, KIMYOUNGKWANG : @손병훈 MES 재확인시 입고 내역없습니다. April 20, 2025 at 10:55 PM, VK (mcs) : Carrier in port 25 have not error, UR reply is: pallet is really to unload. Waiting for LR job from gantry port. Port 25 : PF221-2504090019 April 20, 2025 at 10:55 PM, 손병훈 : 어떻게 내려왔을까요.. April 20, 2025 at 10:56 PM, KIMYOUNGKWANG : MES가 제공하는 VIEW에 입고 대상인지 확인해보겠습니다. April 20, 2025 at 11:01 PM, KIMYOUNGKWANG : MES제공VIEW에는 해당 팔렛이없습니다. April 20, 2025 at 11:09 PM, 손병훈 : @배병민 (Bae Byoungmin) UR/LR이 다 문제인기요? April 20, 2025 at 11:24 PM, 배병민 (Bae Byoungmin) : LR시에만 문제가 되는것으로 보입니다 April 21, 2025 at 2:34 AM April 21, 2025 at 2:34 AM, Dávid F.A. : @MCS Warehouse STK026 STK025 PM Inspection underway..It will be out of service for a short time! April 21, 2025 at 2:35 AM, VK (mcs) : Thanks for information. April 21, 2025 at 6:28 AM, duzzaman Md (MCS) : @FA Good morning. Please check - M0STK012 & M0STK014: FIRE SENSOR ABNORMAL STATE Thank you April 21, 2025 at 6:48 AM, 손병훈 : 지금 토요일 342 번 모듈부터 mes에 자재 재고 없이 실적전송되는 모듈 발생하고 있습니다. mes 에서 보여주는 테이블에서 확인불가한 자재들이 현장에 들어오고있고, 이로인해 입고도 안되는 상황인거같은데 mcs/rtd에서 잘못보고 내리는 상황인가요? April 21, 2025 at 7:07 AM, 손병훈 : 빠른 확인 부탁드립니다 April 21, 2025 at 7:12 AM, KIM SEYEON [김세연]_FA : @박태영 피엠님 @이영혁 paul 매니저님 금일 상기현상 확인 가능한 분 계실까요? April 21, 2025 at 7:13 AM, KIM SEYEON [김세연]_FA : @배병민 (Bae Byoungmin) 피엠님 출근하실건데 같이 확인해보고 싶습니다. April 21, 2025 at 7:13 AM, duzzaman Md (MCS) : This message was deleted. April 21, 2025 at 7:20 AM, 배병민 (Bae Byoungmin) : 제가 운전중이라 출근해서 확인해보겠습니다 April 21, 2025 at 7:42 AM, Atom Yang(MCS/RTD) : @KIM SEYEON [김세연]_FA PM님, 0062 팔렛트 외에는 2개 모두 MES에 정시상적으로 11일에 RACKin 보고 되었고, 20일에 MES RACKOut 까지는 정상이었습니다. WMS InventoryMove 보고에서 우선 Oracle 0001 오류가 발생한 이력이 확인됩니다. 나머지 0062 팔렛트는 RTD에서도 반송 이력이 없습니다. 상세 시간 정보는 메일로 공유하겠습니다. April 21, 2025 at 7:45 AM, FACS_JaewonShin : ■ 21st April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son seungmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 21, 2025 at 7:54 AM, KIM SEYEON [김세연]_FA : 혹시 oracle0001 오류는 어느분이 확인 가능하신건가요? April 21, 2025 at 7:55 AM, Atom Yang(MCS/RTD) : WMS에서 확인해 주셔야 할 듯 합니다. April 21, 2025 at 7:58 AM, 이영혁 paul : 0062 팔레트까지 모두 mes 로 부터 받은 inventorymoverepoortreply 메시지가 ora-00001 로 실패입니다 April 21, 2025 at 8:06 AM, KIM SEYEON [김세연]_FA : @Choi Inbo/최인보 피엠님 해당 현상 확인 가능하신가요? April 21, 2025 at 8:09 AM, Choi Inbo/최인보 : 안녕하세요 wms에서 출고번호가 겹치는 현상이 있어 자동 자재 출고시 에러가 난 것으로 확인했습니다. 출고할때, 번호를 날짜+시퀀스를 이용해 만드는데 시퀀스가 누적 10만회를 넘어서 이렇게 됐습니다. 현재 시퀀스 초기화하여 출고시 에러 없어졌을 것으로 보이는데 반송 실패됐던 것 있으면 다시 보내봐 주실 수 있으신가요? April 21, 2025 at 8:10 AM, KIM SEYEON [김세연]_FA : @손병훈 피엠님 다시 시도해주실수 있을까요? April 21, 2025 at 8:11 AM, KIM SEYEON [김세연]_FA : 그럼 재발방지를 위해서는 시퀀스를 주기적으로 초기화를 시켜줘야 하는건가요? April 21, 2025 at 8:11 AM, Choi Inbo/최인보 : 네 그렇게 되도록 같이 해놨습니다 April 21, 2025 at 8:18 AM, 손병훈 : 11일 저녁부터 있었고 수동자재의 경우 이미 ur올린것도 있는거 같아서 반송실패한것이 뭔지 지금 파악하기가 어렵습니다. 반송로그보고 찾아주셔야할거같습니다. April 21, 2025 at 8:21 AM, Choi Inbo/최인보 : 실패했던 팔렛들로 제한되는건 아니고 다음 팔렛 이동되는 경우 부터는 이런 에러로 중단되는 현상은 없을 것 같습니다 April 21, 2025 at 8:34 AM, 손병훈 : 해당 이슈로 wms->mes 자재이동 안된 pallet Id 조회 부탁드립니다 April 21, 2025 at 8:38 AM, Choi Inbo/최인보 : 하나 보면 PS22A-250416109 있습니다 April 21, 2025 at 8:42 AM, 손병훈 : 현장에 06시 기준 확인결과 엔드플레이트,버스바,2p12s인슐커버A/B, FR캡슐,2p12s어퍼,로어 대부분 입고 안된 채 사용중이었습니다 전체 조회가 필요해보입니다 April 21, 2025 at 8:44 AM, Atom Yang(MCS/RTD) : RTD 시스템 기준으로 동일 증상이 지난 19일부터 확인되고 있습니다. 전체 65건 확인되며, 메일로 공유하겠습니다. April 21, 2025 at 9:14 AM, Choi Inbo/최인보 : 총 에러난 팔렛이 63개이고 그중 45개는 창고에 있는 상태입니다. 18개가 창고 내부에서 안보이는데 이런 자재가 모듈 공정으로 이동되서 사용중인 건지 봐야될거 같습니다. 이동된게 맞으면 wms 수동출고하고 각 팔렛별 반송된 라인으로 mes 수동 입고처리가 필요합니다. April 21, 2025 at 9:19 AM, Choi Inbo/최인보 : 저도 이메일로 분류해서 엑셀탭 나눠서 드렸는데 18개 반송이 다 공정으로 간 것인지 확인 부탁드리겠습니다, 다 간게 맞으면 wms 출고는 제가 하고 모듈mes 자재 입고처리가 같이 진행되면 될 거 같습니다 April 21, 2025 at 9:50 AM, Atom Yang(MCS/RTD) : @Choi Inbo/최인보 PM님, 보내주신 18개 팔렛트에 대한 공정 투입 이력을 확인하여 메일 회신하였습니다. April 21, 2025 at 9:56 AM, Choi Inbo/최인보 : 각 팔렛별로 몇라인으로 갔는지 봐주실 수 있으신가요? April 21, 2025 at 9:58 AM, Atom Yang(MCS/RTD) : 네, 첨부 파일에 투입 라인 설비명을 함께 기재하였습니다. April 21, 2025 at 9:59 AM, Atom Yang(MCS/RTD) : 모두 3라인으로 투입되었습니다. April 21, 2025 at 10:00 AM, Choi Inbo/최인보 : 넵 감사합니다 April 21, 2025 at 11:33 AM, Choi Inbo/최인보 : 이번에 확인된 자재 팔렛들 wms 출고처리 완료하여 모듈mes 자재입고 화면에 보이는 중인 것을 확인 완료했습니다. 번거로우시겠지만, 자재 입고처리 부탁드리겠습니다 April 21, 2025 at 12:37 PM, 손병훈 : 입고처리후에도 lwr bma갯수가 턱없이 부족합니다 추가확인이필요합니다 April 21, 2025 at 12:56 PM, Choi Inbo/최인보 : 자재 코드가 어떻게 되나요? April 21, 2025 at 12:59 PM, 손병훈 : 2p12s BOM에 있는 자재 전부 재확인 해야할거같습니다 April 21, 2025 at 1:00 PM, 손병훈 : 토요일 랏 324번 이후 모듈 실적전송하면 erp백로그날거같습니다. April 21, 2025 at 1:01 PM, 손병훈 : 일단 급한건 22a-00280a (uper) 22a-00279a(lower) 230-00355a (bma) 전부 재고가 0입니다 April 21, 2025 at 1:06 PM, Choi Inbo/최인보 : 4월 19일부터 실패됐던 팔렛인데 다시 창고로 empty상태로 들어온 자재들일거 같아서 확인해 보겠습니다 April 21, 2025 at 1:09 PM, 손병훈 : 넵 부탁드리겠습니다 기간을 조금 더 길게 잡아서 bma로 보면 ps 230 - 2504100112 / 2504100111 / 2504100123 / 2504100127 / 2504100126 2504100104 / 2504100106 / 2504100107 / 2504100134 / 2504100135 / 2504100109 비어있는거같습니다 April 21, 2025 at 1:32 PM, Roland : Hello. Could you check M0STK021 - Crane Fork left detect error, please? Thank you April 21, 2025 at 1:41 PM, 손병훈 : 관련해서 급한 bma upr lwr 정리해서 메일 송부드렸습니다 차후 확인부탁드립니다 April 21, 2025 at 1:54 PM, 전효철 : BMA 11팔렛 704개 우선 출고했습니다 April 21, 2025 at 2:12 PM, Brázik János : Solved April 21, 2025 at 2:12 PM, Choi Inbo/최인보 : lower case 16 pallet, 768개 출고 됐습니다. April 21, 2025 at 3:34 PM, duzzaman Md (MCS) : @FA Please check M0CNV023_P44 Light Curtain Error Thank you April 21, 2025 at 3:52 PM, 손병훈 : 김사합니다 Upper case 도 확인되는대로 부탁드리겠습니다😀 April 21, 2025 at 3:53 PM, Choi Inbo/최인보 : 19일부터 wms 출고 안됐던 pallet들 출고 완료되었습니다. 혹시 수량 보고 계신 방법 있으시면 다시 봐주시겠어요? April 21, 2025 at 3:55 PM, 손병훈 : 어퍼케이스는 자재 없는거로 나옵니다ㅠ April 21, 2025 at 4:10 PM, 승규 (BAEK SEUNGGYU) : @FA PS210-2503100022 appears to have been lifted incorrectly. It is loaded with materials. April 21, 2025 at 4:15 PM, Édl Tamás : Solved April 21, 2025 at 4:33 PM, 손병훈 : 메일 드린것처럼 uppercase PS22A-2504110059 - 2504110062 -2504110064 -2504110068 -2504110066 -2504110058 -2504110060 -2504110063 -2504110061 -2504110069 -2504110056 미입고 인거로 보입니다 April 21, 2025 at 4:33 PM, Choi Inbo/최인보 : 추가 확인해 보니 upper case 11팔렛트 1144개가 있어서 추가 조치하였습니다. 다시 확인 부탁 드리겠습니다 April 21, 2025 at 4:33 PM, Choi Inbo/최인보 : 같은 타이밍에 보셨네요, 다시 봐주시겠어요? April 21, 2025 at 4:35 PM, 손병훈 : 입고확인했습니다. 감사합니다 April 21, 2025 at 6:32 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 8+5/12 Tech, 1Sl Overtime(5): Szabadi Miklós, Harasztia Zoltán, Gégény Dávid, Zsurbej Zsolt Holiday(2): Böröcz Tamás, Rácz Dániel Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Szabadi Miklós - Powder CA AGV(1): Kertész Kornél Dániel --------------- Assy GF (3): Csanálosi Gábor, Gégény Dávid, Zsurbej Zsolt --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Form April 22, 2025 at 5:49 AM April 22, 2025 at 5:49 AM, Horváth Adriàn : Sziasztok. 10es AGV megfeküdt a 3as sor elött. Please check. April 22, 2025 at 5:50 AM, FA CS AGV David 데이비드 : Checking April 22, 2025 at 7:49 AM, FACS_JaewonShin : ■ 22nd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son seungmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 22, 2025 at 10:01 AM, 유주환(Yoo Joohwan) : Mes상 Pallet Base 번호 없어도 회수 하는거에 문제 없나요? April 22, 2025 at 10:45 AM, 유주환(Yoo Joohwan) : 커버A PS210-2503100024 304ea PS210-2503100018 304ea 18번 현장실물 23번 MES상 번호 수량은 동일 합니다 PS210-2503100023 304ea PS210-2503100016 10ea 16번 현장실물 15번 MES상 수량 PS210-2503100015 54ea 커버B PS210-2503100009 624ea PS210-2503100007 450ea 어퍼케이스 PS22A-2504110057 104ea PS22A-2504110072 79ea 위아이디는 실물 아래는 MES상 PS22A-2504110068 104ea PS22A-2504110069 80ea 로어케이스 PS22A-2504110026 48ea PS22A-2504160109 48ea PS22A-2504160102 30ea 위아이디는 실물 아래는 MES상 PS22A-2504160040 48ea PS22A-2504160045 48ea PS22A-2504160042 10ea PS22A April 22, 2025 at 11:02 AM, Mohammad Amir : @Csepi Árpád Please check M0CNV023_P22 there is light curtain error. Thank you! April 22, 2025 at 11:15 AM, Csepi Árpád : Solved April 22, 2025 at 11:15 AM, Mohammad Amir : Thank you very much! April 22, 2025 at 11:15 AM, Csepi Árpád : “You’re welcome!” April 22, 2025 at 11:29 AM, Mohammad Amir : @Csepi Árpád Please check M0CNV021_M02 there is Pallet Overhang Det Error. Thank you very much! April 22, 2025 at 11:34 AM, Csepi Árpád : “It has been resolved!” April 22, 2025 at 11:34 AM, Mohammad Amir : Köszönom szepen 🙏 April 22, 2025 at 11:35 AM, Csepi Árpád : Okay April 22, 2025 at 11:36 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK028_C01 there is MCP 0140MC03 ,MC04 On inverter power error and because of this several jobs are waiting. Thank you very much! April 22, 2025 at 11:58 AM, Maczó Anikó : 2 emeleten a M0STK028. 84003 raktárba nem ment be az anyag . Hibát nem jelez de a gépen látni hogy meg állt az anyag . April 22, 2025 at 11:59 AM, Mohammad Amir : @Csepi Árpád @FA Please check this issue. Thank you very much! April 22, 2025 at 12:15 PM, Mohammad Amir : @FA @Brázik János @Boromisza Zoltán Please check M0STK021_C01 there is Crane fork right Collapse Detect 1 Error,one job is waiting. Thank you! April 22, 2025 at 12:29 PM, Csepi Árpád : Solved April 22, 2025 at 12:29 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 12:42 PM, Csepi Árpád : Solved April 22, 2025 at 12:42 PM, Mohammad Amir : Thank you very much 🙏 April 22, 2025 at 2:47 PM, Mohammad Amir : @Csepi Árpád Please check M0STK028_C01 there is Crane fork left wide #2 check error and it is blocking several jobs. Thank you! April 22, 2025 at 2:57 PM, Édl Tamás : Solved April 22, 2025 at 2:58 PM, Mohammad Amir : Thank you! April 22, 2025 at 3:40 PM, Mohammad Amir : @Brázik János Please check M0CNV036_P13_BP01 there is stop detect error. Thank you! April 22, 2025 at 3:57 PM, Mohammad Amir : @Édl Tamás Please check M0STK022_C01 there is Crane fork right Collapse detect2 error. Thank you! April 22, 2025 at 4:12 PM, Brázik János : Solved April 22, 2025 at 4:13 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 4:13 PM, Mohammad Amir : This error still exists since 15:56. @FA please check Thank you very much! April 22, 2025 at 4:39 PM, Édl Tamás : Solved! April 22, 2025 at 4:39 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 6:10 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 9+3/12 Tech, 1Sl Overtime(3): Hufnágel Dániel, Kasztel Balázs, Novák Zoltán Holiday(1): Czeilinger Krisztián Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós, Novák Zoltán --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Kasztel Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikuso April 22, 2025 at 6:38 PM, Kiara : Sziasztok másodikon anyag nincs de pirosan sírnak a liftek :( April 22, 2025 at 6:39 PM, Denkó Jani (F.A.) : Megyünk April 22, 2025 at 7:52 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK025 The materials have not arrived yet. The job has been created. Please check April 22, 2025 at 7:58 PM, Denkó Jani (F.A.) : What exactly would be the problem? April 22, 2025 at 8:01 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. April 22, 2025 at 8:01 PM, 승규 (BAEK SEUNGGYU) : I requested the materials needed for tomorrow’s production in M3MFA300, but they haven’t been delivered yet April 22, 2025 at 8:08 PM, Shahbaz 샤바즈 MCS/RTD : Now they are transferring, before the jobs were alternated and the reason showing was “M0CNV023 not available “ April 22, 2025 at 8:14 PM, Niki (Modul) : 2 emelet Conveyor Det Error April 22, 2025 at 8:14 PM, Denkó Jani (F.A.) : Látom, megyünk April 22, 2025 at 8:14 PM, Niki (Modul) : De anyag se jön fel még April 22, 2025 at 8:16 PM, Horváth Adriàn invited Kurkó Péter. April 22, 2025 at 8:16 PM, Denkó Jani (F.A.) : Azért is megyünk April 23, 2025 at 6:24 AM April 23, 2025 at 6:24 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 7 Tech, 1 SL Beteg: 4 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(1) Fabricius Gergő ———————————— Assembly GF(1) Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoltán April 23, 2025 at 8:01 AM, FACS_JaewonShin : ■ 23rd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 23, 2025 at 8:35 AM, SKOH2/제조-셀,모듈 출하/김병호 invited ?. April 23, 2025 at 8:35 AM, SKOH2/제조-셀,모듈 출하/김병호 : . April 23, 2025 at 9:24 AM, Mohammad Amir : @Döme György F.A Please check M0STK021_C01 there is Crane fork right collapsed detect 2 error and it is blocking the transfers. Thank you very much! April 23, 2025 at 9:25 AM, Döme György F.A : Checking April 23, 2025 at 9:35 AM, Döme György F.A : Solved April 23, 2025 at 9:36 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 10:46 AM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! April 23, 2025 at 11:02 AM, Zoltán Harasztia FA : Cheking April 23, 2025 at 11:03 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 11:14 AM, Zoltán Harasztia FA : Solved April 23, 2025 at 11:14 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 2:36 PM, Mohammad Amir : @Döme György F.A Please check M0STK035_C01 there is Crane unload error and because of this several jobs with destination M0CNV036-M02 are waiting. Thank you very much! April 23, 2025 at 2:37 PM, Döme György F.A : Checking April 23, 2025 at 2:44 PM, Döme György F.A : Solved April 23, 2025 at 2:45 PM, Mohammad Amir : Thank you very much! April 23, 2025 at 3:22 PM, VacziGyula : Sziasztok! 2emeleten in lift gf stop time over April 23, 2025 at 3:23 PM, Zoltán Harasztia FA : Kész April 23, 2025 at 4:25 PM, 손병훈 : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA @연해리 생산계획대로 8라인 샘플 생산이 있습니다. AGV 바로 사용이 가능 할까요? #8line 샘플 생산 일정 4/24 4P10S-S 165ea 4/26 4P10S-R 165ea 4/28 4P8S 83ea April 23, 2025 at 4:28 PM, 배병민 (Bae Byoungmin) : 모듈 투입 원자재 완제품 샘플 생산시 상위 3군대 다 사용예정이신가요? April 23, 2025 at 4:28 PM, 손병훈 : 넵 맞습니다 April 23, 2025 at 4:33 PM, 배병민 (Bae Byoungmin) : 네 AGV 사용은 가능하겠습니다 지난주 화성에서 항공포장진행으로 1F AGV를 노드에서 다 치워뒀습니다. 1F 화성 자재가 다치워져 있다면 AGV 정위치 노드 준비 해놓겠습니다 명일 샘플생산 시간 공유 부탁드립니다. April 23, 2025 at 4:35 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK021_C01 there is Crane ankle right detect error. Thank you! April 23, 2025 at 4:35 PM, Hmyang(Hungary) : @Duna Don pls manage that. Thx April 23, 2025 at 4:35 PM, 배병민 (Bae Byoungmin) : 원자재 재공은 금일 채우실껀 아니신거죠? April 23, 2025 at 4:37 PM, Zoltán Harasztia FA : This message was deleted. April 23, 2025 at 4:38 PM, Zoltán Harasztia FA : Solved April 23, 2025 at 4:38 PM, 손병훈 : 장폭 앞 노드만 비우면 되지않을까요? 원자재 재공을 오늘 채울수는 없을까요? April 23, 2025 at 4:42 PM, 배병민 (Bae Byoungmin) : 1F 현장 상황을 먼저 확인 해보고 말씀드리겠습니다. April 23, 2025 at 5:16 PM, 배병민 (Bae Byoungmin) : 네 원자재 재공 채우는거 가능하겠습니다 지금 바로 재공채우는거 가능하실까요? April 23, 2025 at 5:16 PM, 손병훈 : 네 바로진행하겠습니다 April 23, 2025 at 5:17 PM, 배병민 (Bae Byoungmin) : 넵 April 23, 2025 at 5:33 PM, 배병민 (Bae Byoungmin) : PM님 명일 연습생산 시작 시간은 어떻게 될까요? April 23, 2025 at 5:34 PM, 송호석(Ho seok song) : 연습생산은 아니고 FRC 샘플생산시작 8시예정입니다. April 23, 2025 at 5:35 PM, 배병민 (Bae Byoungmin) : 네 감사합니다 April 23, 2025 at 5:49 PM, 송호석(Ho seok song) : 4/24 4P10S-S 152ea 4/26 4P10S-R 152ea 4/28 4P8S 76ea 8라인 계획 참고부탁드립니다. @연해리 피엠님, 모듈 생산 계획 내부 공유 부탁드립니다. April 23, 2025 at 5:50 PM, 배병민 (Bae Byoungmin) : 원자재는 재공 투입 진행되셨을까요? April 23, 2025 at 5:52 PM, 송호석(Ho seok song) : 지금 채웁니다 피엠님 April 23, 2025 at 5:59 PM, 연해리 : 넵 특이사항있으시면 말씀 부탁드립니다 April 23, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Novák Károly, Kasztel Balázs, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 23, 2025 at 6:11 PM, 송호석(Ho seok song) : 8라인 P25포트 090 근접센서 감도랑 위치 확인 부탁드립니다. 화물 없는데 감지 뜹니다. April 23, 2025 at 6:12 PM, 배병민 (Bae Byoungmin) : 엔드, 어퍼, 로우쪽 모듈설비를 정상화해야지 자동 이재기쪽 정상화가 가능한분분입니다. April 23, 2025 at 6:14 PM, 손병훈 : 로워는 정상적으로 진행중 어퍼는 미상의 이유로 auto run이 안붙는 상황 - 설비확인중 엔드플레이트는 버퍼06번(엔드플레이트 버퍼) 화물감지 센서 헌팅으로 미작동 April 23, 2025 at 6:20 PM, 배병민 (Bae Byoungmin) : @FA Technician Please check and adjust the sensor on module 1F 8Line PO_25 port. April 23, 2025 at 6:20 PM, N.Gábor F.A. : Okay April 23, 2025 at 6:50 PM, N.Gábor F.A. : We checked each sensor and set them as needed. April 23, 2025 at 6:50 PM, Muneeb Ur Rehman : @FA please check agv 11 at node 2018 April 23, 2025 at 6:51 PM, Muneeb Ur Rehman : There is a tray in front of AGV. Thnkx April 23, 2025 at 6:53 PM, 배병민 (Bae Byoungmin) : Are the end plate gantry and ports back to normal? April 23, 2025 at 6:54 PM, N.Gábor F.A. : The sensors are good, but the gantry is not working due to the position of the server machine April 23, 2025 at 9:06 PM, 승규 (BAEK SEUNGGYU) : @FA M8MFA300_P26 원자재 AGV3번 확인 부탁드립니다 April 24, 2025 at 12:17 AM April 24, 2025 at 12:17 AM, VK (mcs) : @FA Please check 2F M0STK023 Crane fork left collapse detect 3 April 24, 2025 at 12:17 AM, N.Gábor F.A. : Checking April 24, 2025 at 12:34 AM, N.Gábor F.A. : @MCS Hello Could you cancel the job and send this material back to the warehouse? U013430 April 24, 2025 at 12:35 AM, VK (mcs) : P05 won’t be back to in service tonight? April 24, 2025 at 12:35 AM, N.Gábor F.A. : It will not operate until after the morning shift change. April 24, 2025 at 12:36 AM, VK (mcs) : Okay, I will send it back , thx April 24, 2025 at 12:36 AM, N.Gábor F.A. : Thank you April 24, 2025 at 6:11 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 6 Tech, 1 SL Beteg: 4 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(2) Fabricius Gergő Kertész Dani ———————————— Assembly GF(0) ———————————— Formation/Modul(1) Döme György April 24, 2025 at 7:18 AM, FACS_JaewonShin : ■ 24th April Ivancsa FA CS - Withes service Daily(07:30 - 17:30) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 24, 2025 at 9:25 AM, VacziGyula : Sziasztok! 2emeleten in lift 2F slow time over & conveyor det error April 24, 2025 at 9:26 AM, Döme György F.A : Máris nézem April 24, 2025 at 9:46 AM, Döme György F.A : Kész April 24, 2025 at 1:54 PM, FACS_TaehyeongJin : This message was deleted. April 24, 2025 at 2:21 PM, 손병훈 : 8라인 로워케이스 이재기 grip 이 안됩니다. 확인해보면 솔 하나 빠져있는데 이유가있을까요? April 24, 2025 at 2:23 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 빠른 확인 부탁합니다 April 24, 2025 at 2:23 PM, FACS_Hyeongi Son : 넵 확인하겠습니다 April 24, 2025 at 2:30 PM, FACS_Hyeongi Son : 조치했습니다 April 24, 2025 at 4:29 PM, 승규 (BAEK SEUNGGYU) : @FA M3MAF300 완제품 배출 AGV11번 safety Ailve error 정지중입니다. 확인 부탁드립니다 April 24, 2025 at 4:30 PM, FA/CS/AGV/Taimur : Checking April 24, 2025 at 4:32 PM, Duna Don : Solved April 24, 2025 at 4:58 PM, Döme György F.A : @MCS Could you please update the data? The material (U020208) located on M0OQC001_P01 is to be returned to the warehouse. Thank you! April 24, 2025 at 5:09 PM, duzzaman Md (MCS) : Its done. Thanks April 24, 2025 at 6:12 PM, Gábor Vercz : Sziasztok az oqc portról nem viszi el a palettát az agv. Légyszi nézzetek rá. April 24, 2025 at 6:16 PM, Herceg Sándor SSL/C : This message was deleted. April 24, 2025 at 6:17 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Novák Zoltán, Nagy Zsolt, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 24, 2025 at 8:41 PM, VK (mcs) : @FA Please check 2F M0STK025 Crane fork right collapse detect 4 April 24, 2025 at 10:42 PM, Muneeb Ur Rehman : @FA please come to the end product at the end of line 3. There is an error on equipment side. April 24, 2025 at 11:03 PM, Muneeb Ur Rehman : At 1F END product side. There is consistent ACS alive alarm. The agv are not getting connected with the ACS April 24, 2025 at 11:06 PM, 배병민 (Bae Byoungmin) : Does the AGV in question have any remaining commands? April 24, 2025 at 11:07 PM, Muneeb Ur Rehman : Yes they have commands April 24, 2025 at 11:14 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. April 24, 2025 at 11:15 PM, 승규 (BAEK SEUNGGYU) : @FA M8MAF300 셀 버퍼 AGV2번 정지 상태. 확인 부탁드립니다 April 24, 2025 at 11:22 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK022에서 자재가 안 내려옵니다. Carrier ID SMP250420003 April 24, 2025 at 11:23 PM, 배병민 (Bae Byoungmin) : @VK (mcs) Please Check April 24, 2025 at 11:24 PM, VK (mcs) : Checking April 24, 2025 at 11:25 PM, VK (mcs) : @FA Please check 8th line M8MFA300_P29 is OoS. Carrier is waiting on conveyor outport. Thx April 24, 2025 at 11:27 PM, 배병민 (Bae Byoungmin) : @승규 (BAEK SEUNGGYU) 자재는 C/V IN단에 와있는거 같습니다 P29 상태 한번 확인 가능하실까요? April 24, 2025 at 11:32 PM, 승규 (BAEK SEUNGGYU) : M8 P29 상태 다시 확인하였고. 자재 오는 것 확인했습니다. 감사합니다 April 24, 2025 at 11:33 PM, 배병민 (Bae Byoungmin) : 네 감사합니다 April 24, 2025 at 11:34 PM, 배병민 (Bae Byoungmin) : 해당 부분은 지금 처리중입니다 조금만 기다려주세요 April 24, 2025 at 11:52 PM, 배병민 (Bae Byoungmin) : 처리되어 정상운행중인데 좀더 모니터링 중입니다 April 25, 2025 at 4:06 AM April 25, 2025 at 4:06 AM, VK (mcs) : @FA Please check Cell buffer M0STK014 Crane rack position not detect error! April 25, 2025 at 6:05 AM, duzzaman Md (MCS) : @FA Good morning! Please check M0CNV021_RTV01 RTV CAR FIBER COMMUNICATION ERROR thanks and have a great day ahead. April 25, 2025 at 6:22 AM, Maczó Anikó : Sziasztok 2 emeleten M0STK022 raktárba nem megy be az anyag April 25, 2025 at 6:29 AM, duzzaman Md (MCS) : @FA Also kindly check M0CNV035_PO3 WORK DATA ERROR Thanks April 25, 2025 at 6:54 AM, Brázik János : Solved April 25, 2025 at 7:06 AM, duzzaman Md (MCS) : @FA Same error persists. Please take a look. M0CNV021_RTV01 RTV CAR FIBER COMMUNICATION ERROR thank you. April 25, 2025 at 7:39 AM, 윤성제(Yoon SungJe) : @FA 8라인 P02,P04 빈 팔렛트를 제거하지 않습니다 확인 해 주실수 있을까요? April 25, 2025 at 7:41 AM, 배병민 (Bae Byoungmin) : 네 올라 가볼께요 April 25, 2025 at 8:01 AM, 배병민 (Bae Byoungmin) : @손병훈 PM님 셀버퍼 4번창고 오류로 지금 조치중입니다. 4번창고 불가시 1F 8라인 입/출가 불가한 상황입니다. 빨리 정상화 시켜놓겠습니다 죄송합니다 April 25, 2025 at 8:02 AM, 손병훈 : 네 알겠습니다 April 25, 2025 at 8:13 AM, FACS_JaewonShin : ■ 25th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 25, 2025 at 8:14 AM, Roland : Good Morning! M0CNV021 - MC01, MC02 On Trolley AC power and ER01,02 Safety Relay on Check error! Could you check it, please? Thank you April 25, 2025 at 8:19 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 25, 2025 at 8:21 AM, 송호석(Ho seok song) : 조치 소요 시간 문의드립니다. 금일 8라인 생산 오전 중 일찍 완료 후 J/C 및 너트러너 cal 작업 걸려 있는게 많습니다. 소요 시간 보고 타 작업 진행 여부 판단 필요합니다. April 25, 2025 at 8:24 AM, Brázik János : Kész April 25, 2025 at 8:31 AM, 배병민 (Bae Byoungmin) : 좀전에 4번 창고 정상화 되었습니다 생산에 불편을 드려 죄송합니다 April 25, 2025 at 8:33 AM, 송호석(Ho seok song) : 감사합니다. 생산 재개하겠습니다. April 25, 2025 at 8:42 AM, 배병민 (Bae Byoungmin) : @duzzaman Md (MCS) There is a command for Cellbuffer Warehouse 4, but it is not being executed. Please check. April 25, 2025 at 8:43 AM, 배병민 (Bae Byoungmin) : T704594 T702286 April 25, 2025 at 8:46 AM, 배병민 (Bae Byoungmin) : PM님 혹시 모듈 8라인 투입부 오토되었을까요? April 25, 2025 at 8:46 AM, 윤성제(Yoon SungJe) : 네 지금 오토상태입니다 April 25, 2025 at 8:50 AM, duzzaman Md (MCS) : T704594 Everything is okay from MCS , we received HCACK 4 reply. April 25, 2025 at 8:54 AM, FACS_Youngmin LEE : @Mohammad Amir T701921 T702759 plz make job April 25, 2025 at 8:58 AM, duzzaman Md (MCS) : Job is created already from the STK operations April 25, 2025 at 9:00 AM, 배병민 (Bae Byoungmin) : @이영혁 paul 부장님 모듈 1F 8라인 셀버퍼4번창고쪽 Job은 생성이 되었는데 반송을 하지 않습니다 4번창고 GF는 정상적으로 반송중이고 1F가 전체 미반송중입니다. 확인 가능하실까요! April 25, 2025 at 9:01 AM, 배병민 (Bae Byoungmin) : 1F의 모든 목적지가 MCS상 BP01로 되어있습니다 그문제일까요? April 25, 2025 at 9:07 AM, 배병민 (Bae Byoungmin) : @송호석(Ho seok song) PM님 창고 해당 팔레트 NG품입니다 그래서 반송이 안되는거 같습니다 April 25, 2025 at 9:08 AM, 윤성제(Yoon SungJe) : @MCS Hello, could you delete the JOB of M8MFA300_P33? April 25, 2025 at 9:09 AM, 배병민 (Bae Byoungmin) : T704594 T702286 8라인 투입 대기중인 팔레트 NG제품입니나 April 25, 2025 at 9:10 AM, Atom Yang(MCS/RTD) : 안녕하세요, 반송 잡 삭제 요청 사유를 함께 간략하게 설명 부탁드립니다. April 25, 2025 at 9:12 AM, 윤성제(Yoon SungJe) : @mcs There are enough products to complete the production of the model. April 25, 2025 at 9:13 AM, 이영혁 paul : 목적지가 8라인 모듈로 lLR요청받고 딜레이 상태입니다 April 25, 2025 at 9:18 AM, 이영혁 paul : bp01에서 p22 으로 반송이 딜레이 되고 있는걸로 보입니다 April 25, 2025 at 9:23 AM, 송호석(Ho seok song) : 어떤 NG 일까요. 확인해보니 따로 보류 내역은 없습니다. @유주환(Yoo Joohwan) 피엠님 해당cell plt Ng 여부 화성쪽 확인 좀 해주셔요. 반송이 안되고 있습니다. April 25, 2025 at 9:24 AM, Roland : Sziasztok. Megtudjatok nezni a M0STK025 raktarat, mert engedtem ki raklapokat onnan, de nem jonnek ki. April 25, 2025 at 9:28 AM, duzzaman Md (MCS) : M0STK025 is out of service M0STK025_C01 MCP 014MC03,MC04 ON INVERTER POWER April 25, 2025 at 9:57 AM, Csepi Árpád : Solved April 25, 2025 at 10:01 AM, 유주환(Yoo Joohwan) : 설비 반품 오작동이라고 뜨는거같습니다 April 25, 2025 at 10:09 AM, 손병훈 : 셀 버퍼 4번창고 아직 수리중일까요? oos입니다 April 25, 2025 at 10:14 AM, 배병민 (Bae Byoungmin) : 지금 정상동작중입니다 April 25, 2025 at 10:20 AM, 배병민 (Bae Byoungmin) : @손병훈 @송호석(Ho seok song) 지금 8라인 정상 반송 확인되고있습니다 April 25, 2025 at 10:34 AM, FA/CS/AGV/Taimur : @MCS Can you please check carrier: T704569 is going to M8MFA300_P02 as full carrier but physically it is empty. Please check April 25, 2025 at 10:40 AM, 윤성제(Yoon SungJe) : 이 팔렛은 full cell로 들어가려고 하고있습니다 하지만 빈 팔렛입니다 해당 job을 삭제 해 주시고 반송명령을 주실 수 있으실까요? April 25, 2025 at 10:41 AM, duzzaman Md (MCS) : From MCS/RTD it shows full as well. But let me delete it as per Mr Yoon SungJe's request. April 25, 2025 at 10:42 AM, 윤성제(Yoon SungJe) : Sorry my mistake full cell이 아닙니다 잔량 셀이 왔습니다 April 25, 2025 at 10:43 AM, FA/CS/AGV/Taimur : @duzzaman Md (MCS) please reinstate the job thank you. It was miss understanding April 25, 2025 at 10:48 AM, duzzaman Md (MCS) : Reinstated. It has been sent to STK again as we dont have the permission to send it to pricess machine. Please press LR again. Thanks ! April 25, 2025 at 11:25 AM, duzzaman Md (MCS) : @FA Please check M0STK021_C01 there is Crane fork right collapsed detect 1 error Thank you very much! April 25, 2025 at 11:31 AM, duzzaman Md (MCS) : Kindly check M0STK012 as well. Both cranes are OOS. April 25, 2025 at 11:54 AM, Brázik János : Solved April 25, 2025 at 12:07 PM, 손병훈 : @배병민 (Bae Byoungmin) 명일 까지 투입이 안될거같아서 8라인 공더니지 입고 AGV 전원 off 해놨습니다 참고 부탁드립니다 April 25, 2025 at 12:08 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 April 25, 2025 at 1:39 PM, Gabor(priv) : @Csepi Árpád fel tudtok jonni a 8-asra? April 25, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+2/12+1 Tech, 1Sl Overtime(2): Novák Zoltán, Zsurbej Zsolt Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Zsurbej Zsolt --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Novák Zoltán --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása vált April 25, 2025 at 8:54 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán műszak eleje óta nem kapunk két oldalú ragacsot. Kiàll a port hibàra egy idő utàn de a raktárból semmi nem jön. Check pliiiz April 25, 2025 at 8:58 PM, Denkó Jani (F.A.) : Okés April 25, 2025 at 9:06 PM, Denkó Jani (F.A.) : Hányas számú port? April 25, 2025 at 9:09 PM, Horváth Adriàn : Igen 🤣 P23 April 25, 2025 at 9:24 PM, Denkó Jani (F.A.) : @Mohammad Amir @Shahbaz 샤바즈 MCS/RTD @Shakir (MCS) Hello. Please delete the data from the M3MFA300_P23 port. There is no physical material inside, but there is a palette data with the career ID: PS290-2410210005. Thank you. April 25, 2025 at 9:27 PM, Shahbaz 샤바즈 MCS/RTD : Okay, I updated M3MFA300_P23 info. Thank you. April 25, 2025 at 9:48 PM, Denkó Jani (F.A.) : Sir, the data is still there, and because of this the next palette is not coming out. Action is required. April 25, 2025 at 9:51 PM, Shahbaz 샤바즈 MCS/RTD : The Load request is already up, pallet is not coming because there is no Lot available at the moment. April 25, 2025 at 10:46 PM, Atom Yang(MCS/RTD) : T704455 Carrier를 M0STK014 창고에 입고하고 RackInReport 보고하였는데, WMS에서 ORA-01013 오류 발생하였습니다. 확인 요청합니다. April 25, 2025 at 10:47 PM, Atom Yang(MCS/RTD) : 보고 시간은 04-25 21:31:08 입니다. April 25, 2025 at 11:31 PM, Denkó Jani (F.A.) : the data is still not deleted April 25, 2025 at 11:33 PM, Shahbaz 샤바즈 MCS/RTD : Sorry, I MCS there is no carrier data for M3MFA300_P23. April 25, 2025 at 11:48 PM, 손병훈 : is there any material if next lot search at M3M P23?? April 25, 2025 at 11:49 PM, 손병훈 : it means there are no material at all or no material in the shelf? April 25, 2025 at 11:50 PM, Shahbaz 샤바즈 MCS/RTD : Was the port in use? I can see the last transfer was on 29/03/2025 at 11:41 PM with Pallet ID PS290-2410210005. April 25, 2025 at 11:50 PM, Shahbaz 샤바즈 MCS/RTD : The RTD next lot search for this port is zero. April 25, 2025 at 11:52 PM, 손병훈 : got it👍 But is it mean there are no material at all right? not sorted by any rules April 25, 2025 at 11:58 PM, Shahbaz 샤바즈 MCS/RTD : Yes, the LR is up, but RTD is showing zero in lot search, so the job is not being created. April 26, 2025 at 12:18 AM April 26, 2025 at 12:18 AM, 손병훈 : @wms @이민호 MINHO tape반송가능한 자재가없는거같은데 확인되는대로 부탁드립니다 April 26, 2025 at 12:22 AM, Horváth Adriàn : @Denkó Jani (F.A.) alapanyag raktàr CV13 stop detect error.. Check please April 26, 2025 at 12:29 AM, Horváth Adriàn : Solved😁 April 26, 2025 at 3:37 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK021_C01 “Crane unload timeout “ Thanks April 26, 2025 at 3:45 AM, Denkó Jani (F.A.) : Solved April 26, 2025 at 4:42 AM, Kiara : Sziasztok 2.emeletre szeretnék karbantartót kérni April 26, 2025 at 4:44 AM, Rácz Dániel / FA : This message was deleted. April 26, 2025 at 4:47 AM, Boromisza Zoltán : Megyek April 26, 2025 at 4:51 AM, Boromisza Zoltán : Kész April 26, 2025 at 6:07 AM, Mohammad Amir : @FA Please check M0STK022_C01 there is CRANE fork left collapse detect 1 error and it is blocking transfer to Module line-3 P34 port. Thank you very much! April 26, 2025 at 6:32 AM, Csepi Árpád : Solved April 26, 2025 at 6:33 AM, Mohammad Amir : Thank you very much! April 26, 2025 at 6:35 AM, Csepi Árpád : You’re welcome! April 26, 2025 at 9:30 AM, Bozó Gyula : Sziasztok! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! April 26, 2025 at 2:15 PM, Atom Yang(MCS/RTD) : Photo April 26, 2025 at 2:15 PM, Atom Yang(MCS/RTD) : InventoryMoveReportReply 에서 WMS Oracle 오류가 발생하였습니다. 확인 부탁드립니다. Oracle connection error April 26, 2025 at 2:43 PM, Mohammad Amir : @Csepi Árpád Please check M0STK021_C01 there is CRANE ankle left detect error. Thank you! April 26, 2025 at 2:59 PM, Mohammad Amir : @Csepi Árpád @FA Please check this issue it still exists. Thank you very much! April 26, 2025 at 3:02 PM, Csepi Árpád : “I’m on my way there!” April 26, 2025 at 3:02 PM, Mohammad Amir : Thank you very much 🙏 April 26, 2025 at 3:06 PM, Csepi Árpád : Solved April 26, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 26, 2025 at 8:24 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK028_C01 “Crane TimeOver Error” Thank you April 26, 2025 at 8:29 PM, Boromisza Zoltán : Solved April 26, 2025 at 8:43 PM, Kurkó Péter : Hello we need helping 3line dunnage unloading position AGV 14 P10_loading time over alarm April 26, 2025 at 8:43 PM, Kurkó Péter : Module April 26, 2025 at 8:43 PM, Kurkó Péter : Thx April 26, 2025 at 8:43 PM, FA CS AGV David 데이비드 : Okay coming April 26, 2025 at 8:46 PM, Denkó Jani (F.A.) : Solved April 27, 2025 at 6:10 AM April 27, 2025 at 6:10 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— April 27, 2025 at 6:25 AM, Alexandra : Sziasztok! 2.emeleten a fóliázó gépnél esik le a hőfok. April 27, 2025 at 6:26 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0CNV023_35_028 there is Wrapper Heater Temp Alarm. Thank you! April 27, 2025 at 6:46 AM, Csepi Árpád : Solved April 27, 2025 at 6:46 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 8:25 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! April 27, 2025 at 8:28 AM, Mohammad Amir : @Édl Tamás Could you please check this Manual Rackout request is getting failed cause OQC_P01 is OOS. Thank you! April 27, 2025 at 8:36 AM, Mohammad Amir : For you information, Issue has been resolved ✅ And job has been created,U020707 on the way. Thank you very much! April 27, 2025 at 8:37 AM, Édl Tamás : Solved April 27, 2025 at 8:37 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 8:42 AM, Mohammad Amir : AGV#10 on the way to M0OQC001_P01. ✅ Thank you! April 27, 2025 at 1:43 PM, Alexandra : 2.emeleten keresztbe fordult a conveyor pályán az anyag, a fóliázó gép után April 27, 2025 at 2:05 PM, Mohammad Amir : @Édl Tamás Could you please check M0CNV023_35_029 there is Stop detect error. Thank you! April 27, 2025 at 2:22 PM, Édl Tamás : Solved April 27, 2025 at 2:22 PM, Mohammad Amir : Thank you very much! April 27, 2025 at 4:26 PM, Maczó Anikó : Sziasztok 2 emeleten floor in position error Gf stop time over April 27, 2025 at 4:30 PM, Mr.Miti (미티) FA : Árpi megy nemsokára 🫣 elloptam picit April 27, 2025 at 4:31 PM, Édl Tamás : Ok April 27, 2025 at 4:49 PM, Édl Tamás : Kész April 27, 2025 at 4:50 PM, Maczó Anikó : Thank you April 27, 2025 at 5:09 PM, Magosi Erik : @Csepi Árpád 3as 4as sor között az alapanyag liftes hmi hibában áll. Néz márr rá kérlek miaz April 27, 2025 at 5:09 PM, Magosi Erik : Köszi April 27, 2025 at 5:14 PM, Csepi Árpád : Elkészült! April 27, 2025 at 5:14 PM, Magosi Erik : Köszi Árpi April 27, 2025 at 6:15 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+1/12 Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Fabriczius Gergely, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő April 27, 2025 at 7:57 PM, Niki (Modul) : Sziasztok @Boromisza Zoltán nem megy be az anyag 🥺 April 27, 2025 at 7:57 PM, Boromisza Zoltán : Megyek April 27, 2025 at 8:08 PM, Boromisza Zoltán : Kész April 27, 2025 at 8:18 PM, Kiara : Elszakadt a fólia :( @Denkó Jani (F.A.) April 27, 2025 at 8:19 PM, Kiara : Magától megy a fólia (feltekeredik) April 27, 2025 at 8:20 PM, Boromisza Zoltán : Megyek April 27, 2025 at 8:36 PM, Boromisza Zoltán : Remélem kész 😆😆 April 27, 2025 at 8:59 PM, Kovács Krisztián : Fa segítséget kérnék line3 April 27, 2025 at 8:59 PM, Kovács Krisztián : Legvégén April 27, 2025 at 9:44 PM, Kiara : Fóliázógép megadta magát :( April 27, 2025 at 9:44 PM, Denkó Jani (F.A.) : Az baj 😮‍💨 April 27, 2025 at 10:31 PM, Boromisza Zoltán : Kész van ismét April 27, 2025 at 11:15 PM, Niki (Modul) : @Boromisza Zoltán @Denkó Jani (F.A.) szellemünk basztazja csavarja fel a fóliát!! April 27, 2025 at 11:15 PM, Ákos (Modul 2.E.) : Második emelet fóliázott nem jó April 27, 2025 at 11:15 PM, Ákos (Modul 2.E.) : Köszi April 27, 2025 at 11:16 PM, Denkó Jani (F.A.) : Mindjárt megyünk April 27, 2025 at 11:17 PM, Ákos (Modul 2.E.) : Okés April 27, 2025 at 11:17 PM, Ákos (Modul 2.E.) : Mert tekeri a fóliát még mindig April 27, 2025 at 11:17 PM, Ákos (Modul 2.E.) : Nem jó April 27, 2025 at 11:17 PM, Ákos (Modul 2.E.) : Direkt nem nyúlok hozzá April 27, 2025 at 11:17 PM, Boromisza Zoltán : Nyissátok ki az ajtót April 27, 2025 at 11:18 PM, Ákos (Modul 2.E.) : Miket? April 27, 2025 at 11:18 PM, Ákos (Modul 2.E.) : Meg van állítva a gép April 27, 2025 at 11:18 PM, Denkó Jani (F.A.) : És úgy is tekeri? April 27, 2025 at 11:20 PM, Ákos (Modul 2.E.) : Nem April 27, 2025 at 11:20 PM, Boromisza Zoltán : 👍 April 27, 2025 at 11:55 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán nem mén az alapanyag raktàr. De gondolom màr hekkelitek April 27, 2025 at 11:56 PM, Denkó Jani (F.A.) : Igen April 28, 2025 at 12:07 AM April 28, 2025 at 12:07 AM, Boromisza Zoltán : Kész April 28, 2025 at 1:53 AM, Kovács Krisztián : Legyetek kedvesek egy agv-t arrébb vinni Line 3 block 2 legelején ragasztás miatt April 28, 2025 at 1:53 AM, Kovács Krisztián : Modul* April 28, 2025 at 1:54 AM, Muneeb Ur Rehman : Checking April 28, 2025 at 4:33 AM, VK (mcs) : @FA There is a job to the 3rd line module assembly M3MFA300_P03 but it's alternated. Port is out of service! April 28, 2025 at 4:34 AM, Boromisza Zoltán : Okey April 28, 2025 at 4:37 AM, Boromisza Zoltán : Solved April 28, 2025 at 6:04 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 28, 2025 at 7:00 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV023_34_035 wrapper heater temp alarm. Thank you very much! April 28, 2025 at 7:55 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK028_C01 there is Crane fork right Collapse Detect 1 Error. Thank you! April 28, 2025 at 8:00 AM, FACS_JaewonShin : ■ 28th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 28, 2025 at 9:08 AM, 윤성제(Yoon SungJe) : @FA M3MFA300 P27.P26 COMMUNICATION ERROR Please check it. April 28, 2025 at 9:10 AM, 윤성제(Yoon SungJe) : solved.. April 28, 2025 at 9:13 AM, Roland : Hello. Can you check it M0CNV022 - CV031 IN port, please? We can’t use it, because throws Product Detect error! April 28, 2025 at 9:43 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK028_C01 there is Crane fork wide #2 check Error. Thank you! April 28, 2025 at 9:43 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK021_C01 crane fork wide #2 check error. Thank you very much! April 28, 2025 at 9:43 AM, Mohammad Amir : Several jobs are waiting because of these issues. Thank you very much! April 28, 2025 at 11:05 AM, 손병훈 : @Choi Inbo/최인보 @최용회 @rtd PS22A-2503190011 PF221-2504110017 둘다 inventorymovereport reply 에러입니다. 오라클에러 인데 확인부탁드립니다 April 28, 2025 at 11:21 AM, 손병훈 : 추가로 PS230-2503190015 도 있습니다 April 28, 2025 at 11:36 AM, Choi Inbo/최인보 : 네 확인해 보겠습니다 April 28, 2025 at 11:42 AM, SKOH2/제조-셀,모듈 출하/김병호 : @Facs 북측 1F M0CNV033_RTV01 정지 상태입니다. 확인부탁드립니다. 이관품 배출 중이라 빠른 확인 부탁드리겠습니다. April 28, 2025 at 11:45 AM, SKOH2/제조-셀,모듈 출하/김병호 : @Facs North 1F M0CNV033_RTV01 Stopped. Please check. April 28, 2025 at 11:47 AM, Mohammad Amir : Sir , It has stopped cause the carrier Loaded on it U019784 has no job. Please inform me where you would like to receive it ,I will send it. Thank you very much! April 28, 2025 at 11:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV033_M03 April 28, 2025 at 11:52 AM, Mohammad Amir : Issue has been resolved Sir ✅ Carrier on its way to M03. I am monitoring for smooth delivery. Thank you very much! April 28, 2025 at 11:53 AM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you, the problem has been solved April 28, 2025 at 11:54 AM, Mohammad Amir : You are welcome Sir. Feel free to reach out to me again if you face any issues. April 28, 2025 at 11:55 AM, Mohammad Amir : For you information Sir, Carrier has successfully arrived at M03_M0CNV033 at 11:54. ✅ RTV is now working fine. Thank you very much! April 28, 2025 at 2:03 PM, Szabolcs : @FA M0CNV033 problem. Check please. April 28, 2025 at 2:07 PM, Roland : Please check it, Thank you April 28, 2025 at 2:23 PM, 손병훈 : 해당 건 수동 출고로 진행될까요? April 28, 2025 at 2:47 PM, Choi Inbo/최인보 : 네, 혹시 3 팔렛 모두 3라인으로 간거 맞을까요? April 28, 2025 at 2:54 PM, Szabolcs : @FA M0CNV033_M03 CV031 Conveyor Rum Time Over Error and CV031 STOP DETECT Error. Check please. April 28, 2025 at 2:55 PM, Choi Inbo/최인보 : Does M3MFA300_P28 mean, module production 3rd line? April 28, 2025 at 2:58 PM, 손병훈 : 네 맞습니다 April 28, 2025 at 3:27 PM, N.Gábor F.A. : @MCS Good day I would like to request that the pallet U020854 be deleted and I would like to request a job so that it can be placed in the warehouse. It is currently physically on port M0CNV031_P01. April 28, 2025 at 3:28 PM, Mohammad Amir : Checking April 28, 2025 at 3:30 PM, Mohammad Amir : Issue has been resolved ✅ Carrier on its way to store in M0STK032_Z01. I am monitoring the transfer for smooth delivery. Thank you very much! April 28, 2025 at 3:31 PM, N.Gábor F.A. : Thank you very much! April 28, 2025 at 3:31 PM, Mohammad Amir : You are welcome! April 28, 2025 at 3:33 PM, Mohammad Amir : For your information, According to your request,Carrier U020854 has successfully stored in M0STK032(0102302) at 15:33. ✅ If you have any issues ,feel free to contact me again. Thank you very much! April 28, 2025 at 3:37 PM, Choi Inbo/최인보 : 위 3 팔렛 포함하여 같은 증상인 2팔렛 포함하여 총 5 팔렛수동 출고 처리 완료되었습니다. 자재입고 화면에서 보이실 것입니다. PF221-2504110017 PS22A-2503190011 PS22A-2503190015 PS22A-2503190018 PS230-2503190015 이번 현상은 출고가 처리되는 과정에서 DB연결에 시간이 소요되어 에러가 발생한 것으로 딜레이 원인은 아직 파악중에 있습니다. 본사 DB관리자와 같이 확인을 해봐야해서 분석하는데 더 시간이 걸릴것 같아 원인 확인되어 개선 방안 있으면 반영하면서 공유 드리도록 하겠습니다. April 28, 2025 at 4:14 PM, F.A.Balazs : @MCS Good day I would like to request that the pallet U020857 be deleted and I would like to request a job so that it can be placed in the warehouse. It is currently physically on port M0CNV031_P01. April 28, 2025 at 4:15 PM, Mohammad Amir : Checking April 28, 2025 at 4:17 PM, F.A.Balazs : Thx April 28, 2025 at 4:17 PM, Mohammad Amir : Issue has been resolved ✅ Carrier on its way to store in M0STK031_Z01. I am monitoring the transfer for smooth delivery. Thank you very much! April 28, 2025 at 4:17 PM, Mohammad Amir : You are welcome! April 28, 2025 at 4:21 PM, Mohammad Amir : This message was deleted. April 28, 2025 at 4:21 PM, Mohammad Amir : For your information, According to your request,Carrier U020857 has successfully stored in M0STK031(0102402) at 16:20. ✅ Thank you very much! April 28, 2025 at 6:17 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 + 1 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 1 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Fabricius Gergő Kertész Dani Gégény Dávid ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(4) Döme György Harasztia Zoli Sarvajcz Ferenc Denko János April 28, 2025 at 7:18 PM, Zoltán Harasztia FA : @mcs Hi, could you check why no material is arriving at F0BPM011 P02? April 28, 2025 at 7:22 PM, VK (mcs) : There is no LR Last one was at 16:51 April 28, 2025 at 7:29 PM, Zoltán Harasztia FA : Thank you for your help April 28, 2025 at 7:30 PM, VK (mcs) : This message was deleted. April 28, 2025 at 7:32 PM, VK (mcs) : @FA Please check Z301541 Location: M0STK011_P13_BP01 Carrier doesn't move! Last destination is STK 12 April 29, 2025 at 12:05 AM April 29, 2025 at 12:05 AM, VK (mcs) : @FA Please check M0STK 028 April 29, 2025 at 12:06 AM, Denkó Jani (F.A.) : I am here🫡 April 29, 2025 at 12:16 AM, VacziGyula : Sziasztok! 2emeleten in lift conveyor det error April 29, 2025 at 12:17 AM, Sarvajcz Ferenc FA : Okes. April 29, 2025 at 12:18 AM, Döme György F.A : Kész April 29, 2025 at 12:47 AM, VK (mcs) : @FA Please check 2F M0STK026 Crane fork right collapse detect 2 April 29, 2025 at 12:47 AM, Denkó Jani (F.A.) : Going April 29, 2025 at 1:05 AM, Denkó Jani (F.A.) : Solved April 29, 2025 at 1:18 AM, Denkó Jani (F.A.) : Solved 🫡 April 29, 2025 at 3:06 AM, András : Sziasztok! 2emeleten in lift conveyor det error April 29, 2025 at 3:12 AM, Denkó Jani (F.A.) : Már megy is April 29, 2025 at 3:12 AM, András : Köszi April 29, 2025 at 3:16 AM, VK (mcs) : @FA Please check 2F M0STK025 Crane fork right collapse detect 2 April 29, 2025 at 3:17 AM, Denkó Jani (F.A.) : F.A. team is going 🫡💪🏻 April 29, 2025 at 3:20 AM, Denkó Jani (F.A.) : Solved April 29, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+3 Overtime (3):Édl Tamás, Böröcz Tamás, Céhman Zsolt Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Oláh András, Céhman Zsolt Assembly(6): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs,Böröcz Tamás Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Édl Tamás April 29, 2025 at 7:44 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 29, 2025 at 8:28 AM, 배병민 (Bae Byoungmin) : @FA Please check the Collapsed alarm in Raw Materials Warehouse No. 23. April 29, 2025 at 8:32 AM, Roland : Sziasztok. A M0STK028 daru iszonyú lassan hozza a cuccokat. Tudjatok miert van ez? Koszonom April 29, 2025 at 10:38 AM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 원자재 28번 크레인 조치에 문제가 있을까요? April 29, 2025 at 11:27 AM, duzzaman Md (MCS) : @FA Please check M0CNV023_P31 Inverter not ready CW/CCW error. Thank you very much! April 29, 2025 at 11:29 AM, duzzaman Md (MCS) : @FA Kindly check M0STK021_C01, too Crane ankle left detect error Thanks ! April 29, 2025 at 11:58 AM, FACS_TaehyeongJin : Solved April 29, 2025 at 12:07 PM, 배병민 (Bae Byoungmin) : @duzzaman Md (MCS) Can you please cancel the return job on MOSTK028? PS22A-2504280076 April 29, 2025 at 12:07 PM, duzzaman Md (MCS) : Sure. On it. April 29, 2025 at 12:15 PM, duzzaman Md (MCS) : Cancelled and created a new job to the STK from MCS. Let me know if you'd want something else with this carrier. For this STK , Crane is still out of service. April 29, 2025 at 12:31 PM, FA CS AGV Jawad : Dear MCS / RTD, is it possible to send AGV 11 back to ita source..? April 29, 2025 at 12:31 PM, Sazzad Bhai SKon : Checking April 29, 2025 at 12:31 PM, FA CS AGV Jawad : Pallet ID - R705363, box packing April 29, 2025 at 12:43 PM, Sazzad Bhai SKon : The job is still on ACS system. So, new job is not being executed. Please delete from ACS April 29, 2025 at 12:45 PM, FA CS AGV Jawad : Thanks bhae April 29, 2025 at 12:47 PM, FA CS AGV Jawad : Can you someone plz delete the job...@Fa , @ACS April 29, 2025 at 1:32 PM, 이영혁 paul : M0STK028_C01 OOS 상태 메시지 이후 inservice 메시지를 못받았습니다 April 29, 2025 at 1:53 PM, 배병민 (Bae Byoungmin) : 네 확인 감사합니다. 정상조치되었습니다 April 29, 2025 at 4:45 PM, N.Gábor F.A. : @MCS Hello Is it possible to solve the problem that the raw material supply for M3MFA300 does not come from M0STK028? That warehouse is currently in error and cannot supply the line with raw material. April 29, 2025 at 4:47 PM, N.Gábor F.A. : Also, so that the returned empty pallets do not go to M0STK028 for storage. April 29, 2025 at 4:49 PM, duzzaman Md (MCS) : We are fully aware of the current situation. The teams are diligently endeavoring to resolve the issue. We kindly request for patience as we await the resolution. April 29, 2025 at 6:01 PM, Édl Tamás : STK028 is out of service at night, repairs will continue tomorrow April 29, 2025 at 6:15 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 + 1 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 1 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Fabricius Gergő Kertész Dani Gégény Dávid ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(4) Döme György Harasztia Zoli Sarvajcz Ferenc Denko János April 29, 2025 at 6:19 PM, 송호석(Ho seok song) : @연해리 @배병민 (Bae Byoungmin) 3라인 Bma shortage로 생산 지연중인데요, 창고 반송관련 확인 부탁드립니다. @승규 (BAEK SEUNGGYU) 창고 내 자재현황 확인 부탁드리고 자재 잡 잡혀져있는지 봐주셔요 주임님. April 29, 2025 at 6:22 PM, 배병민 (Bae Byoungmin) : 네 확인 해보겠습니다 April 29, 2025 at 6:27 PM, 승규 (BAEK SEUNGGYU) : 3라인 BMA Active 자재 모두 소진했습니다. P28 생성된 잡이 없습니다. April 29, 2025 at 6:29 PM, 승규 (BAEK SEUNGGYU) : 3라인 P28 원점 후 다시 로딩하였고 잡 생성되었습니다. April 29, 2025 at 6:35 PM, FA-CS-AGV-Masoud : @fa Please check MFMFA300_P34 BCR read error April 29, 2025 at 6:41 PM, Zoltán Harasztia FA : Which line is this? April 29, 2025 at 6:41 PM, 배병민 (Bae Byoungmin) : 죄송합니다 한번만더 P28 재로딩 가능하실까요? April 29, 2025 at 6:41 PM, FA-CS-AGV-Masoud : Raw material 3-4 April 29, 2025 at 6:42 PM, 승규 (BAEK SEUNGGYU) : 다시 로딩 했습니다. April 29, 2025 at 6:43 PM, Zoltán Harasztia FA : Solved April 29, 2025 at 9:00 PM, VacziGyula : Sziasztok! 2emeleten cv42 other party is not responding April 29, 2025 at 9:01 PM, Zoltán Harasztia FA : Megyünk April 29, 2025 at 9:19 PM, Zoltán Harasztia FA : @ mcs Hi, could you help me, please? The empty materials from M3MFA300 are currently set to return to warehouse 28, which is not operational at the moment. This setting needs to be changed so that the empty pallets are sent to a different warehouse. Because of this, the material flow is now backed up. The following materials are also stuck because they are trying to go to warehouse 28: PS230-2504170145 on M0CVN023_84_27 PS230-2504170148 on M0CNV023_B2-N PS230-2504100051 on M0CNV023_B04 The April 29, 2025 at 9:20 PM, Shahbaz 샤바즈 MCS/RTD : Checking.. April 29, 2025 at 9:31 PM, Zoltán Harasztia FA : It has started now, thank you very much for your help. April 29, 2025 at 9:32 PM, Shahbaz 샤바즈 MCS/RTD : Yes we are rerouting them. April 29, 2025 at 9:37 PM, Shahbaz 샤바즈 MCS/RTD : @FA The stocker M0STK025, 27 are OOS. Please check April 29, 2025 at 10:04 PM, Zoltán Harasztia FA : Solved April 29, 2025 at 11:28 PM, VacziGyula : 2emeleten in lift gf stop time over April 30, 2025 at 12:29 AM April 30, 2025 at 12:29 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK021 “Crane unload timeout” Thanks April 30, 2025 at 12:34 AM, Zoltán Harasztia FA : Solved April 30, 2025 at 12:44 AM, FA-CS-AGV-Masoud : @FA Please check port M0STK012_P10 April 30, 2025 at 12:45 AM, Döme György F.A : Checking April 30, 2025 at 3:02 AM, András : MOCNV023_RTV02 car stopper down error time delay April 30, 2025 at 3:03 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK011 “Crane carrier data mismatch “ Thank you April 30, 2025 at 3:42 AM, Denkó Jani (F.A.) : Solved April 30, 2025 at 3:57 AM, (Unknown) left this chatroom. April 30, 2025 at 6:18 AM, Maczó Anikó : Sziasztok 2.-dik emeleten M0STK028 raktárba nem megy be az anyag hibát nem jelez 84003 April 30, 2025 at 6:25 AM, duzzaman Md (MCS) : Crane is out of service for this STK. Hope this info helps. Thank you. April 30, 2025 at 6:43 AM, Maczó Anikó : Yes, thank you April 30, 2025 at 7:01 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 30 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 30, 2025 at 7:11 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— April 30, 2025 at 7:23 AM, Maczó Anikó : Sziasztok 2 -dik emeleten Floor in position error Gf stop time over Köszönöm April 30, 2025 at 7:38 AM, duzzaman Md (MCS) : @FA Please check M0CNV023_LF22 there is GF STOP TIME OVER ERROR Thank you! April 30, 2025 at 7:56 AM, Édl Tamás : Solved! April 30, 2025 at 8:27 AM, Maczó Anikó : Sziasztok 2-dik emeleten The other party is not responding Köszönöm April 30, 2025 at 8:32 AM, 배병민 (Bae Byoungmin) : 원자재 창고#28이 정상적으로 복구되었습니다. Raw Materials Warehouse #28 has been restored to normal operation. April 30, 2025 at 8:40 AM, Édl Tamás : Kész! April 30, 2025 at 9:17 AM, Édl Tamás : Megyek egy kisebb koreai csoporttal April 30, 2025 at 10:33 AM, Édl Tamás : Mégsem April 30, 2025 at 11:30 AM, Beatrix : Hello! M0CNV021_CV004 Stop detect error. April 30, 2025 at 11:55 AM, Édl Tamás : Kész! April 30, 2025 at 11:55 AM, Mr.Miti (미티) FA : Fuu de jó vagy! April 30, 2025 at 1:21 PM, Laci : Sziasztok. M0CNV021_CV004 stop detect error April 30, 2025 at 1:24 PM, duzzaman Md (MCS) : @FA Please check April 30, 2025 at 1:33 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Conveyor DET error Köszönöm April 30, 2025 at 1:36 PM, duzzaman Md (MCS) : @FA Please check M0CNV021_P11 STOP DETECT ERROR M0CNV023_LF22 CONVEYOR DET ERROR @Édl Tamás April 30, 2025 at 1:46 PM, Tóth Gyula : Sziasztok, MOCNV033 M_03 modul kiszedès elakadt. Kèrlek nèzzètek rá. Köszönöm szépen. April 30, 2025 at 2:03 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son Lift_22 한번 같이 확인 부탁드립니다 April 30, 2025 at 2:04 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 완제품 창고 1F M0CNV033 구역 “conveyor run time over error” 발생하여 제품 배출이 안되고 있습니다 재품 출하중이라 빠른 확인 부탁드립니다 April 30, 2025 at 2:04 PM, FACS_Hyeongi Son : 넵 확인하겠습니다 April 30, 2025 at 2:05 PM, Édl Tamás : Solved April 30, 2025 at 2:11 PM, 배병민 (Bae Byoungmin) : @진재정 과장님 금일 출하쪽 마무리될때까지 한분 붙어서 대응 부탁드립니다 April 30, 2025 at 2:12 PM, FACS_TaehyeongJin : 이동중입니다 April 30, 2025 at 2:16 PM, Édl Tamás : Solved April 30, 2025 at 2:20 PM, FACS_TaehyeongJin : Solved April 30, 2025 at 2:48 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300_P33,34 M0STK024에서 자재 안내려오고 있습니다. 잡은 생성되었습니다. Catrier ID P33 - PS22A-2503310006 P34 - PS22A-2504040047 April 30, 2025 at 3:03 PM, 배병민 (Bae Byoungmin) : 네 확인 해보겠습니다 April 30, 2025 at 3:11 PM, FACS_Hyeongi Son : @mcs PS22A-2504230044 exists inside the crane. But there is no job. Please create it April 30, 2025 at 3:11 PM, FACS_Hyeongi Son : This message was deleted. April 30, 2025 at 3:12 PM, FACS_Hyeongi Son : M0STK024_C01 crane April 30, 2025 at 3:12 PM, FACS_Hyeongi Son : @duzzaman Md (MCS) April 30, 2025 at 3:14 PM, 배병민 (Bae Byoungmin) : 제가 컨트롤 중입니다 April 30, 2025 at 3:14 PM, FACS_Hyeongi Son : 넵 감사합니다 April 30, 2025 at 3:15 PM, 배병민 (Bae Byoungmin) : 정상 반송 진행되었습니다 April 30, 2025 at 3:47 PM, duzzaman Md (MCS) : @FA Kindly check MOSTK034_C01 Its OOS. Thanks ! April 30, 2025 at 3:53 PM, Édl Tamás : Solved! April 30, 2025 at 4:36 PM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 주임님 안녕하세요 혹시 금주 휴일 (목,금) 출하 또는 입고 예정이 있으실까요? April 30, 2025 at 4:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 목금은 출하 일정이 없습니다. 5월 3일 토요일 셀 항공 출하 및 재고실사(차주 월요일 셀,모듈 출고품 배출 작업 진행이 있습니다. April 30, 2025 at 5:00 PM, 배병민 (Bae Byoungmin) : 넵 정보 감사합니다 April 30, 2025 at 5:28 PM, Édl Tamás : Solved again 17:26 April 30, 2025 at 5:30 PM, duzzaman Md (MCS) : Appreciate you continued support. Thank you. April 30, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 7:56 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. April 30, 2025 at 7:57 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300_P34. Materials are not coming down from M0STK027. The job has been created Carrier ID PS22A-2504160026 April 30, 2025 at 8:02 PM, Denkó Jani (F.A.) : I do it. April 30, 2025 at 8:09 PM, Denkó Jani (F.A.) : I have resolved the error, please be patient and the requested material will arrive. April 30, 2025 at 10:13 PM, Kiara : Sziasztok Másodikra karbantartót szeretnénk kérniiii :( April 30, 2025 at 10:34 PM, Denkó Jani (F.A.) : Solved May 1, 2025 at 1:22 AM May 1, 2025 at 1:22 AM, VK (mcs) : @FA Please check M0STK013 Z301874 (0101308) has destination to STK 14 but it is not transferring. May 1, 2025 at 1:24 AM, VK (mcs) : Also please check M0STK027 PF221-2504280005 is on crane and not moving. May 1, 2025 at 1:43 AM, VK (mcs) : @FA Please check M0STK023 Crane STK action 5 min time over error! May 1, 2025 at 1:44 AM, Boromisza Zoltán : Okey May 1, 2025 at 1:48 AM, Boromisza Zoltán : Solved May 1, 2025 at 1:54 AM, Boromisza Zoltán : Solved May 1, 2025 at 1:54 AM, Denkó Jani (F.A.) : because there is no such palette in stock May 1, 2025 at 1:55 AM, Denkó Jani (F.A.) : PF221-2504230005 there is such a thing May 1, 2025 at 1:57 AM, VK (mcs) : So there is nothing on the crane ? MCS indicates it is on the crane! May 1, 2025 at 1:59 AM, Denkó Jani (F.A.) : SCS says the crane is empty. May 1, 2025 at 1:59 AM, VK (mcs) : According to log it transferred from CNV22-M02 > CNV22-P16 and then stopped on crane! May 1, 2025 at 2:00 AM, VK (mcs) : Okay thank you May 1, 2025 at 2:14 AM, Denkó Jani (F.A.) : there was a data stuck on cnv22 p16, we deleted the data, but the palette is not physically here either May 1, 2025 at 2:15 AM, VK (mcs) : I got it, that’s why still it’s showing on crane. Thank you so much for checking May 1, 2025 at 6:00 AM, 윤성제(Yoon SungJe) : @FA Please support P35. I can't get initials. May 1, 2025 at 6:01 AM, 윤성제(Yoon SungJe) : LINE 8 May 1, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— May 1, 2025 at 6:51 AM, 윤성제(Yoon SungJe) : @FA Is there anyone who can support 8-line p35? I can't get my port initials. May 1, 2025 at 7:44 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 1, 2025 at 7:48 AM, 배병민 (Bae Byoungmin) : @진재정 1F 8라인 확인 및 조치 부탁드립니다 May 1, 2025 at 8:23 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! May 1, 2025 at 8:59 AM, FACS_TaehyeongJin : 조치완료했습니다 May 1, 2025 at 12:40 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK014 “crane travel X distance safety error “ Thanks May 1, 2025 at 12:43 PM, 배병민 (Bae Byoungmin) : 제가 지금 곧 현장도착하는데 상태 그대로 유지 부탁합니다 May 1, 2025 at 4:50 PM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! May 1, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 1, 2025 at 7:16 PM, Kurkó Péter : Hello modulon a 3line végén nem tudta felvenni a dunnage t az agv valaki nézze meg köszi May 1, 2025 at 7:17 PM, Muneeb Ur Rehman : Checking May 1, 2025 at 7:21 PM, Denkó Jani (F.A.) : Solved May 1, 2025 at 7:30 PM, 배병민 (Bae Byoungmin) : @FA Please check M0STK027 crane. Double cargo error May 1, 2025 at 7:43 PM, Denkó Jani (F.A.) : Solved May 1, 2025 at 7:50 PM, 배병민 (Bae Byoungmin) : Thank you May 1, 2025 at 10:50 PM, Horváth Adriàn : @Denkó Jani (F.A.) 3as sorra gyere ki pls. FRC porthoz May 1, 2025 at 10:51 PM, Boromisza Zoltán : Megyek May 1, 2025 at 10:54 PM, Boromisza Zoltán : Kész May 2, 2025 at 2:29 AM May 2, 2025 at 2:29 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán dokk folyoson 10 AGV slam error May 2, 2025 at 2:30 AM, Denkó Jani (F.A.) : Megyek May 2, 2025 at 4:47 AM, Horváth Adriàn : @Denkó Jani (F.A.) dokk magasraki zenél egy ideje. Check pliiiz 😁 May 2, 2025 at 4:51 AM, Denkó Jani (F.A.) : Solved May 2, 2025 at 6:11 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2):Novák Károly, Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Kovács Szabolcs 1F: Kasztel Balázs, Novák Zoltán Modul(2): Magyar Balázs, Martina Dávid, May 2, 2025 at 6:16 AM, duzzaman Md (MCS) : @FA Good morning. Kindly check M0STK036_C01 Its OOS. Thanks ! May 2, 2025 at 6:36 AM, duzzaman Md (MCS) : @FA Please check M0STK021_C01 “MCP GF HP1 LIGHT CURTAIN DETECT ERROR ” Thanks May 2, 2025 at 6:40 AM, Dávid F.A. : @duzzaman Md (MCS) Good morning! STK036 Inspection has been carried out. The warehouse is not operational! May 2, 2025 at 6:41 AM, duzzaman Md (MCS) : Thank you for your insight. I'll keep it in mind. Please check STK21. Have a wonderful day ahead. May 2, 2025 at 7:43 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 2, 2025 at 7:45 AM, duzzaman Md (MCS) : @FA Kindly check M0STK021_C01 Crane ankle right detect error Thank you May 2, 2025 at 8:21 AM, duzzaman Md (MCS) : @FA Kindly check M0STK028_C01 Crane ankle right detect error Thank you May 2, 2025 at 9:22 AM, duzzaman Md (MCS) : @FA Please check M0STK011 Both cranes are OOS Thank you May 2, 2025 at 9:31 AM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx 8 pallet to GF port in raw material warehouse. May 2, 2025 at 9:33 AM, 윤경환 : It's a waste pallet. May 2, 2025 at 9:35 AM, Sazzad Bhai SKon : We will send to Manual ports M0CNV021 M03/04 May 2, 2025 at 9:35 AM, 윤경환 : Thank you. May 2, 2025 at 9:57 AM, duzzaman Md (MCS) : 🚨 Current Machine Status 🔧 M0STK011-C01 & C02 Issue: MCP rear door open Since: 2 May 2025, 09:50 AM ⚠ Attention M0STK034 — 100% full in capacity May 2, 2025 at 10:04 AM, 윤성제(Yoon SungJe) : @FA Hello, we are waiting for AGV loaded with the complete module GF product. Please check. AGV 8,11,14 May 2, 2025 at 10:05 AM, FA/CS/AGV/Taimur : Checking May 2, 2025 at 10:08 AM, 송호석(Ho seok song) : @Mes / RTD / FA 3라인 bma 재고(2p18s-r)가 이상한데요, mes에 active로 살아있는 풀 팔레트가 있는데 rtd캐리어 이력조회 시 자재 소진 후 empty로 올라간 이력 확인됩니다. mes에서는 실제 사용 실물과 다른 base plt의 bma를 차감 중이고요. 확인 부탁드립니다. May 2, 2025 at 10:09 AM, 송호석(Ho seok song) : [mes : active , rtd : empty 적치] PS230-2504100071 PS230-2504100069 PS230-2504100070 May 2, 2025 at 10:10 AM, 송호석(Ho seok song) : [현장 사용 실물] PS230-2504100074 full PS230-2504100076 full PS230-2504100075 사용중 May 2, 2025 at 10:24 AM, Dávid F.A. : @MCS Palette Local M0CNV031_P01 : U021457 I would like to request a new workflow! Delete an old task! May 2, 2025 at 10:32 AM, duzzaman Md (MCS) : Done. Thanks May 2, 2025 at 10:35 AM, Dávid F.A. : Thank you very much for your help! May 2, 2025 at 6:17 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 + 1 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (5) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Czeilinger Krisztián ———————————— Assembly 1F(2) Kertész Dani Gégény Dávid ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc May 2, 2025 at 6:27 PM, András : Sziasztok! 2. emelet cv027 detect error May 2, 2025 at 6:27 PM, Zoltán Harasztia FA : Megyünk May 3, 2025 at 5:14 AM May 3, 2025 at 5:14 AM, VK (mcs) : @FA Please check M0STK0 11 port 13 - BP 01 Z301844 is not moving Destination is STK 12. May 3, 2025 at 5:19 AM, Zoltán Harasztia FA : Solved May 3, 2025 at 5:35 AM, VK (mcs) : @FA Please check M0STK 032 Fire and smoke detected in shelf . May 3, 2025 at 5:38 AM, Döme György F.A : Yes.I'm here May 3, 2025 at 6:06 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13+1 overtime Overtime (1): Csanálosi Gábor Sick (0):- Holiday (3):Novák Károly, Nagy Gábor , Novák Zoltán Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Csanálosi Gábor 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 3, 2025 at 6:54 AM, Dávid F.A. : @CSS STK032 Occurred 04:43 Error :. Fire And Smoke Detect Inshelf :. Pallet ID U021703 check has been made there is no fire in the warehouse ! We believe the situation is according to SCS. Local 0201207! Smoke alarm is faulty! The warehouse is out of order. We would like to ask for help. May 3, 2025 at 7:07 AM, Szabo Ede Sandor : Sziasztok Be kértük a U021876 palettát kb. 1 órája és nem történt semmi a port azt jelzi hogy jön de nem ért ide. Légyzives nézzetek rá ha van időtök. Köszönöm szépen. May 3, 2025 at 7:10 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK032 is OOS. Thank you May 3, 2025 at 7:19 AM, Dávid F.A. : STK032 Occurred 04:43 Error :. Fire And Smoke Detect Inshelf... It is out of service. Due to the problem described! May 3, 2025 at 7:21 AM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you for the information. The carrier mentioned above is from this stocker. May 3, 2025 at 7:23 AM, Dávid F.A. : Jelenleg nem üzemel a raktár STK032 ahogy a MCS ellenőriztem! A U021876 paletta ott található! Amíg nem hárítják el koreai kollégák problémát addig nem kerül ki szállításra QC porta! Amint üzemkész a raktár szólni fogok! May 3, 2025 at 7:24 AM, Szabo Ede Sandor : Köszönöm szépen. May 3, 2025 at 9:20 AM, 배병민 (Bae Byoungmin) : The cargo in question would have been automatically released to the manual port through the fire scenario logic. Has the cargo in question been confirmed and re-released? May 3, 2025 at 9:23 AM, Dávid F.A. : @MCS @Szabo Ede Sandor @배병민 (Bae Byoungmin) STK032 The warehouse is ready for operation! Üzemkész a raktár! May 3, 2025 at 9:24 AM, Shahbaz 샤바즈 MCS/RTD : I’m not fully sure about the fire scenario logic, but the stocker is currently in service and the carrier is moving toward the destination. May 3, 2025 at 9:25 AM, 배병민 (Bae Byoungmin) : Ok,Thank you May 3, 2025 at 9:31 AM, Szabo Ede Sandor : Köszönöm szépen. May 3, 2025 at 10:00 AM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx 3 pallet to GF port in raw material warehouse. May 3, 2025 at 10:03 AM, Shahbaz 샤바즈 MCS/RTD : Hello, To M0CNV022_M03/M04? May 3, 2025 at 10:09 AM, 윤경환 : Please send to M0CNV021 M03/04. May 3, 2025 at 10:14 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for W000229, W000231 and W000235. Thanks May 3, 2025 at 10:15 AM, 윤경환 : Thank you. 👍 May 3, 2025 at 10:39 AM, FA/CS/AGV/Taimur : @mcs Can you please check In GF end product line 3 port: M3MFA300_P05 the carrier ID in the port and carrier ID assigned for job doesn’t match. It is causing AGV alarm, also the dunnage is not completely filled yet. Thank you May 3, 2025 at 10:43 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the actual carrier ID. There was UR for U021625 and job is created for that. May 3, 2025 at 10:46 AM, FA/CS/AGV/Taimur : The actual carrier ID must be: U021595. The previous UR is incorrect U021625 carrier doesn’t exist in this dunnage May 3, 2025 at 10:48 AM, Shahbaz 샤바즈 MCS/RTD : In this case I will cancel previous transfer. Please UR again with correct carrier Id. May 3, 2025 at 12:10 PM, Dávid F.A. : @Shahbaz 샤바즈 MCS/RTD I would like to ask for help! Pallet storage ID:. U021595 Local : M0CNV031_P01 There is a job. Then delete it! Create a new job! May 3, 2025 at 12:14 PM, Shahbaz 샤바즈 MCS/RTD : Checking May 3, 2025 at 12:18 PM, Shahbaz 샤바즈 MCS/RTD : I can’t see any log for this pallet. There is a UR from M0MFA300_P05, but the job was terminated. How did it move to M0CNV031_P01, and is it physically there? Please confirm. May 3, 2025 at 12:25 PM, Dávid F.A. : Currently located here. M0CNV031_P01 ID:. U021595 MCS job is missing! May 3, 2025 at 12:28 PM, Dávid F.A. : Inspection was also physically located there! May 3, 2025 at 12:33 PM, Dávid F.A. : @Shahbaz 샤바즈 MCS/RTD Thank you for your help! May 3, 2025 at 12:33 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome. May 3, 2025 at 5:40 PM, Simon Attila : Please check Second floor inverter not ready error Thank you May 3, 2025 at 5:44 PM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV023 there are several alarms and because of this several jobs are pending. Thank you very much; May 3, 2025 at 5:51 PM, Dávid F.A. : Transferred to next shift @Zoltán Harasztia FA They come to fix the problem! May 3, 2025 at 5:57 PM, 방혁 PM(Bang.Hyuk) FA : Sziasztok Night shift FA Technician Schedule Date: 2025.05.03 Time:18:00-06:00 1. Bang hyuk 2. Baek hojong Köszönöm szépen May 3, 2025 at 6:05 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Kertész Dani Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc May 3, 2025 at 6:07 PM, Mohammad Amir : @Zoltán Harasztia FA @Döme György F.A Please check this issue ,there are several jobs pending because of this. Thank you very much! May 3, 2025 at 6:09 PM, Zoltán Harasztia FA : Cheking May 3, 2025 at 9:17 PM, András : please check MOCNV023_82_038 interface error May 3, 2025 at 9:18 PM, András : Sziasztok a 2. emeleten stop detect error May 3, 2025 at 9:19 PM, Zoltán Harasztia FA : Megyünk May 3, 2025 at 10:50 PM, András : Sziasztok 2. emeleten Invertor not ready CW/CCW error May 3, 2025 at 10:50 PM, Zoltán Harasztia FA : Már úton vagyunk May 3, 2025 at 11:12 PM, András : Sziasztok 2. emeleten Invertor not ready CW/CCW error újra May 3, 2025 at 11:12 PM, Zoltán Harasztia FA : Nézzük May 3, 2025 at 11:12 PM, András : Köszi May 4, 2025 at 2:04 AM May 4, 2025 at 2:04 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK024_C01 there is Double cargo error. Thank you very much! May 4, 2025 at 2:20 AM, Zoltán Harasztia FA : Solved May 4, 2025 at 2:21 AM, Mohammad Amir : Thank you very much! May 4, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+1 overtime Overtime (1): Csanálosi Gábor Sick (1):Kiss Balázs Holiday (3): Nagy Gábor , Novák Zoltán , Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: , Nagy Zsolt, Csanálosi Gábor, Novák Károly 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 4, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 4 Time: 06:00~18:00 1. Jeong Woo-jun May 4, 2025 at 10:07 AM, Simon Attila : Please check second floor Out lift conveyor slow error Thank you May 4, 2025 at 10:27 AM, Dávid F.A. : Kérlek a kicsomagolás után nézzétek meg palettát,most csomagoló fólia darab okozta megállast! May 4, 2025 at 3:13 PM, Shahbaz 샤바즈 MCS/RTD : @FA M0STKA037_C01 is OutOfService, having Crane W/T In Abort error. Please check Thank you! May 4, 2025 at 3:25 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check 2F M0STK028 Crane fork left wide#03 check error Thanks May 4, 2025 at 3:47 PM, Szabo Ede Sandor : Sziasztok Légyszives töröljétek az OQC porton az adatokat /U021929/ mert nem jól raktuk össze a palettákat. Levettük és jól összeraktuk de az adatot nem tudjuk törölni. May 4, 2025 at 3:53 PM, Shahbaz 샤바즈 MCS/RTD : There is no U021929 data in the system, please confirm the carrier Id. May 4, 2025 at 3:53 PM, FA CS AGV Jawad : This message was deleted. May 4, 2025 at 3:54 PM, Shahbaz 샤바즈 MCS/RTD : Currently U021942 is showing at OQC_P01 May 4, 2025 at 3:55 PM, Gábor Vercz : @Mohammad Amir I would like to request that the pallet number U021942 be deleted from the OQC port. Because the stack was assembled incorrectly. Thank you May 4, 2025 at 3:56 PM, FA CS AGV Jawad : Bhae is it possible to remove data temporarily from OQC port of this pallet U 021943 They have removed the pallet and AGV has job for this .? May 4, 2025 at 4:01 PM, Shahbaz 샤바즈 MCS/RTD : I deleted the data, please UR again when it’s ready. Thanks May 4, 2025 at 4:04 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK037_C01 is OOS there is CRANE move timeout error. Thank you May 4, 2025 at 4:15 PM, Gábor Vercz : Thank you for your help, we managed to return the pallets to the warehouse in the correct way. May 4, 2025 at 4:51 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK023_C01 “MCP 2F OP1 LIGHT CURTAIN DETECT ERROR ” Thanks May 4, 2025 at 6:06 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Kertész Dani Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc May 4, 2025 at 6:22 PM, VK (mcs) : @FA Please check M0STK024 MCP SMC# 1 disconnected error! May 4, 2025 at 6:22 PM, Döme György F.A : I'm here May 4, 2025 at 6:23 PM, Döme György F.A : Done May 5, 2025 at 6:04 AM May 5, 2025 at 6:04 AM, Shahbaz 샤바즈 MCS/RTD : @FA Good morning! Kindly check M0STK034_C01 Crane ankle right detect error Thank you May 5, 2025 at 6:10 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Szabadi Miklós, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladat May 5, 2025 at 6:54 AM, Szabolcs : Good morning. @FA M0STK031 warehouse problem. Please Check. May 5, 2025 at 6:59 AM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD pls help us, manufacturing looking for MA4122 MA1283 magazines, could you find them? May 5, 2025 at 7:00 AM, Shahbaz 샤바즈 MCS/RTD : Checking… May 5, 2025 at 7:05 AM, Shahbaz 샤바즈 MCS/RTD : MLA4232 @ C1STKA71_0100705 Magazines: MA1283,4122,1204… May 5, 2025 at 7:09 AM, Csanálosi Gábor FA : Could you send it to manual port? Those 2 magazines are NGs, they want to take out May 5, 2025 at 7:11 AM, Shahbaz 샤바즈 MCS/RTD : Okay, transfer command created to the manual port. May 5, 2025 at 7:13 AM, Csanálosi Gábor FA : Thank you! May 5, 2025 at 7:15 AM, Denkó Jani (F.A.) : @Shahbaz 샤바즈 MCS/RTD Helló.Please modify the following data for the pallet on port M0STK014_P02, which is T703283 May 5, 2025 at 7:17 AM, Denkó Jani (F.A.) : and please put the pallet on shelf M0STK014, 0200404. thank you. May 5, 2025 at 7:18 AM, Shahbaz 샤바즈 MCS/RTD : That is ID read fail so updating data will not work. May 5, 2025 at 7:18 AM, Shahbaz 샤바즈 MCS/RTD : So it will be stored as UNK carrier in the stocker. May 5, 2025 at 7:19 AM, Shahbaz 샤바즈 MCS/RTD : Later it has to be removed and Rack In with proper ID read. Thank you May 5, 2025 at 7:19 AM, Denkó Jani (F.A.) : I can solve it if it's unknown, but right now I'm stuck with quite a lot of things and I need to get that palette out of the way. May 5, 2025 at 7:21 AM, Shahbaz 샤바즈 MCS/RTD : The port is OOS, there is already transfer command for UNK to the zone. May 5, 2025 at 7:23 AM, Denkó Jani (F.A.) : And now? May 5, 2025 at 7:25 AM, Shahbaz 샤바즈 MCS/RTD : Still port P02 is OOS. May 5, 2025 at 7:26 AM, Denkó Jani (F.A.) : no longer May 5, 2025 at 7:30 AM, Shahbaz 샤바즈 MCS/RTD : The SCS is replying with HCACK:10 “Mismatch cassette size” for the transfer command. May 5, 2025 at 7:31 AM, Denkó Jani (F.A.) : the problem🙄 May 5, 2025 at 7:33 AM, Boromisza Zoltán : Most 34 stk solved May 5, 2025 at 8:07 AM, FACS_JaewonShin : ■ 5th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 5, 2025 at 9:00 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK027 Crane fork right collapse detect 2 Thank you May 5, 2025 at 9:05 AM, Shahbaz 샤바즈 MCS/RTD : And M0STK022 as well. Thank you May 5, 2025 at 9:27 AM, Denkó Jani (F.A.) : Solved May 5, 2025 at 9:31 AM, Boromisza Zoltán : Solved May 5, 2025 at 10:31 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK021 Crane fork right collapse detect 2 Thank you May 5, 2025 at 10:32 AM, Boromisza Zoltán : Okey May 5, 2025 at 10:36 AM, Boromisza Zoltán : Solved May 5, 2025 at 11:24 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK024 Crane fork right collapse detect 1 Thank you May 5, 2025 at 11:25 AM, Boromisza Zoltán : Okey May 5, 2025 at 11:38 AM, Boromisza Zoltán : Solved May 5, 2025 at 1:01 PM, Kurkó Péter : Hello modul 4line we waiting dunnage pls check the warehouse thx May 5, 2025 at 1:05 PM, Sazzad Bhai SKon : There are pending jobs for both 3/4 line. M3MFA300_P06 and M4MFA300_P05. but line 3, Port 06 is oos. So this dunnage is blocking the job for 4th line. May 5, 2025 at 1:05 PM, Sazzad Bhai SKon : @FA Please check M3MFA300_P06 it is oos now. Blocking other transport jobs May 5, 2025 at 1:09 PM, Sazzad Bhai SKon : Thank you FA, The transfer initiated now May 5, 2025 at 1:38 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK021 Crane fork right collapse detect 1 Thank you May 5, 2025 at 1:43 PM, Shahbaz 샤바즈 MCS/RTD : Also M0CNV022_P15_BP01 port is OOS. Please check Thanks May 5, 2025 at 1:46 PM, Boromisza Zoltán : Okey May 5, 2025 at 1:50 PM, Boromisza Zoltán : Solved May 5, 2025 at 1:58 PM, Boromisza Zoltán : Solved May 5, 2025 at 2:28 PM, Beatrix : Hello. M0CNV022_CV025 Light Curtain Error. Can you please check it? May 5, 2025 at 2:33 PM, Boromisza Zoltán : Megyek May 5, 2025 at 2:37 PM, Boromisza Zoltán : Kész May 5, 2025 at 3:10 PM, Horváth Adriàn : @Boromisza Zoltán Line 3 AGV keresztbe fordult a màsik elött. Pls check May 5, 2025 at 3:10 PM, FA CS AGV Jawad : OMW May 5, 2025 at 4:55 PM, Niki (Modul) : @Boromisza Zoltán tutul hátul a gép May 5, 2025 at 5:09 PM, Boromisza Zoltán : Megyek May 5, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 5, 2025 at 8:03 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Floor in position error Gf stop time over Köszönöm May 5, 2025 at 8:15 PM, Csepi Árpád : Solved May 5, 2025 at 8:22 PM, Mohammad Amir : @Csepi Árpád Please check M0STK024_C01 there is MCP 2F light curtain detect error. Thank you very much! May 5, 2025 at 9:43 PM, Maczó Anikó : Sziasztok 2.-dik emeleten conveyor det error Köszönöm May 5, 2025 at 9:43 PM, Mohammad Amir : @Csepi Árpád Please check M0CNV023_LF21 there is Conveyer det error. Jobs have been stopped. Thank you! May 5, 2025 at 10:09 PM, Csepi Árpád : Solved May 5, 2025 at 10:09 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 12:12 AM May 6, 2025 at 12:12 AM, Mohammad Amir : This message was deleted. May 6, 2025 at 12:12 AM, Mohammad Amir : @Csepi Árpád @FA Coould you please check M4MFA300_P02 ,it is OOS and because of this AGV#4 can not deliver the material T701188. Thank you very much! May 6, 2025 at 12:14 AM, Mohammad Amir : Please take care of this issue on priority as it is affecting the production. Thank you very much! May 6, 2025 at 12:22 AM, Csepi Árpád : Production for this shift has been completed! May 6, 2025 at 12:23 AM, Mohammad Amir : Thank you very much! May 6, 2025 at 12:35 AM, Mohammad Amir : @Csepi Árpád I need one confirmation from you,could you please confirm me is F0BPM011_P02 full or empty ? It has any carrier ? AGV #6 is waiting to deliver for some time. Thank you very much! May 6, 2025 at 12:48 AM, Csepi Árpád : The 06 AGV is in manual mode. The Z301973 pallet has not been moved to the F0BPM011_P02 location. The production line is not operating! May 6, 2025 at 12:50 AM, Mohammad Amir : Thank you very much 🙏 for this information. Please also confirm,is F0BPM011_P02 ,is actually empty of is there any material located on this port ? May 6, 2025 at 12:56 AM, Csepi Árpád : The P02 is currently empty, but according to new information, production will soon start in the department. May 6, 2025 at 12:57 AM, Mohammad Amir : Thank you very much for the confirmation. May 6, 2025 at 1:35 AM, Csepi Árpád : @Mohammad Amir Hi! I need your assistance. There is a data discrepancy on the F0BPM011_P02 port. The current ID: Z301983 Please update the data to this ID: ID: Z301973 Thank you very much! May 6, 2025 at 1:40 AM, Mohammad Amir : As it shows In MCS Z301973 currently located at AGV#6 . So , currently Z301973 located at F0BPM011_P02? Thank you very much! May 6, 2025 at 1:41 AM, Csepi Árpád : Yes! It was moved manually. May 6, 2025 at 1:42 AM, Mohammad Amir : Please first cancel the command from ACS side as I checked it still exists there. Afterwards I will update the information. Thank you very much! May 6, 2025 at 1:47 AM, Csepi Árpád : Alright! I don’t have a password to delete the data. I kindly ask for a little patience! May 6, 2025 at 1:47 AM, Mohammad Amir : Okay , I understand. Please let me know once the job is cancelled from ACS side. Thank you very much! May 6, 2025 at 2:36 AM, Csepi Árpád : I couldn’t delete the data, so the task is currently on hold. Thank you very much for your help! May 6, 2025 at 2:41 AM, Mohammad Amir : Dear @이민재 Sir, I hope you are well. Could you please cancel the job from ACS for Z301973 as according to @Csepi Árpád this job has already been completed as AGV#6 has manually delivered the materials. Unfortunately @Csepi Árpád couldn't cancel the job so we need your assistance. Afterwards I will update the relevent data. Thank you very much! May 6, 2025 at 2:59 AM, 이주봉PM LEE JUBONG(FA) : Job deleted May 6, 2025 at 3:00 AM, Mohammad Amir : Thank you very much Sir🙏. May 6, 2025 at 3:02 AM, Mohammad Amir : Issue has been resolved ✅. Location has been updated as requested. Thank you very much! May 6, 2025 at 3:53 AM, Csepi Árpád : Thank you for your help! The issue has been resolved! May 6, 2025 at 3:53 AM, Mohammad Amir : You are welcome! May 6, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 1Sl Overtime(2): Szabadi Miklós, Novák Károly Holiday(1): Czeilinger Krisztián Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Szabadi Miklós, Rácz Dániel --------------- Assy GF (4): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása v May 6, 2025 at 7:19 AM, 윤성제(Yoon SungJe) : This message was deleted. May 6, 2025 at 7:20 AM, 윤성제(Yoon SungJe) : @안녕하세요 4라인 P03의 빈 팔레트를 배출하지못하고 있습니다 job은 생성되었는데 확인 해 주실수 있을까요? May 6, 2025 at 7:21 AM, 윤성제(Yoon SungJe) : @FA May 6, 2025 at 7:28 AM, 윤성제(Yoon SungJe) : 추가로 M4MFA300_P02,04번도 JOB은 생성되었지만 셀이 오고있지 않습니다 확인 부탁드립니다 May 6, 2025 at 7:31 AM, 윤성제(Yoon SungJe) : @MCS 안녕하세요 확인결과 FA팀은 AGV가 문제없다고 합니다 이 문제를 확인 해 주실수 있을까요? 4라인 설비도 이상없습니다 May 6, 2025 at 7:55 AM, duzzaman Md (MCS) : As I was monitoring, both jobs are already executed. May 6, 2025 at 7:56 AM, Atom Yang(MCS/RTD) : 지금은 MCS 시스템 상태로는 반송이 정상 진행되고 있으나, 06:50 ~ 07:30 까지 ACS에서 Assign 되지 못한 상태로 확인됩니다. May 6, 2025 at 7:56 AM, 이영혁 paul : 7시52분 vc05 어사인되었습니다 May 6, 2025 at 7:58 AM, 윤성제(Yoon SungJe) : 확인 감사합니다 지금 1,2블럭 정상가동중입니다 May 6, 2025 at 8:29 AM, FACS_JaewonShin : ■ 6th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 6, 2025 at 9:19 AM, duzzaman Md (MCS) : @FA Please check M0CNV021_P14 STOP DETECT ERROR Thank you May 6, 2025 at 9:20 AM, Boromisza Zoltán : Okey May 6, 2025 at 9:31 AM, Denkó Jani (F.A.) : SOLVED May 6, 2025 at 9:35 AM, Böröcz Tamás : Ne kiabálj May 6, 2025 at 9:36 AM, Denkó Jani (F.A.) : Ő kezdte 🤷🏻‍♂️ May 6, 2025 at 11:46 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! May 6, 2025 at 11:51 AM, Boromisza Zoltán : Kész May 6, 2025 at 1:31 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#1.2 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 13:31 -End : 5. Remark(special note) : -X May 6, 2025 at 1:43 PM, Beatrix : @MCS/RTD PS230-2504100131 is not coming outside. Can you help me? Location: 04/19/08 May 6, 2025 at 1:52 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#1.2 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 13:31 -End : 13:52 5. Remark(special note) : -X May 6, 2025 at 1:58 PM, duzzaman Md (MCS) : Can you confirm me the destination for this carrier please ? May 6, 2025 at 2:02 PM, 윤경환 : Please send to M0CNV021 M03/04. May 6, 2025 at 2:06 PM, duzzaman Md (MCS) : Done. Its moving now. May 6, 2025 at 2:08 PM, 윤경환 : Thank you.👍 May 6, 2025 at 2:43 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#1.2 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 13:31 -End : 5. Remark(special note) : -X May 6, 2025 at 2:50 PM, Roland : Hello. Can you check M0CNV022_M01 IN port, please? Product detect error! Thank you May 6, 2025 at 2:58 PM, duzzaman Md (MCS) : @FA Please check M0STK027_C01 Crane fork left collapse detect M0STK028_C01 MCP on inverter error. Thank you May 6, 2025 at 3:01 PM, Boromisza Zoltán : Solved May 6, 2025 at 3:03 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#3.4 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 15:03 -End : 5. Remark(special note) : -X May 6, 2025 at 3:06 PM, Denkó Jani (F.A.) : Solved May 6, 2025 at 3:27 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#3.4 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 15:03 -End : 15:26 5. Remark(special note) : -X May 6, 2025 at 4:55 PM, Niki (Modul) : @Denkó Jani (F.A.) hátsó raktárnál gond van May 6, 2025 at 4:58 PM, FA CS AGV Jawad : Stk014_P10 May 6, 2025 at 4:58 PM, Denkó Jani (F.A.) : ? May 6, 2025 at 4:59 PM, FA CS AGV Jawad : AGV is unable to unload pallet..? May 6, 2025 at 5:01 PM, Niki (Modul) : Galambbal nézek farkas szemet itt van hátul! Azért riaszt be folyton a szenzorba! May 6, 2025 at 5:02 PM, Niki (Modul) : Erős a gyanú,hogy nem 2 hanem 3 van! May 6, 2025 at 5:07 PM, Boromisza Zoltán : Megyek May 6, 2025 at 5:07 PM, Denkó Jani (F.A.) : Solved May 6, 2025 at 5:08 PM, Niki (Modul) : Maradj! Újra lett indítva May 6, 2025 at 5:09 PM, Boromisza Zoltán : Köszi May 6, 2025 at 5:09 PM, Boromisza Zoltán : Már itt vagyok May 6, 2025 at 5:09 PM, Boromisza Zoltán : Látom May 6, 2025 at 5:14 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz come to stk14_port 10 infront of box packing May 6, 2025 at 5:20 PM, Denkó Jani (F.A.) : Solved May 6, 2025 at 5:20 PM, FA CS AGV Jawad : Bundle of Thanksss May 6, 2025 at 5:21 PM, Niki (Modul) : Hátsó raktár piros 🥺😩 May 6, 2025 at 5:21 PM, Denkó Jani (F.A.) : Photo May 6, 2025 at 5:30 PM, Niki (Modul) : Photo May 6, 2025 at 5:30 PM, Boromisza Zoltán : Kész May 6, 2025 at 5:54 PM, Bozó Gyula : Sziasztok!! Modul PQC portot megnéznétek légyszi a 3 palettáért nem jött AGV hogy visszavigye a raktárba! Köszönöm! May 6, 2025 at 6:05 PM, Mohammad Amir : @FA M0STK023_C01 there is MCP 014MC03,MC04 ON Inverter Power error. Thank you very much! May 6, 2025 at 6:19 PM, Édl Tamás : Solved May 6, 2025 at 6:20 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 6:37 PM, FA-CS-AGV-Masoud : @FA Please check port M0STK012_P10 PIO communication failed May 6, 2025 at 6:42 PM, Csepi Árpád : @Mohammad Amir Hi! There is a pending transport task at the M0OQC001_P01 port. I would like to send it back to the warehouse. Please assist me! ID: U022125 May 6, 2025 at 6:42 PM, Mohammad Amir : Good Evening, Checking. May 6, 2025 at 6:43 PM, Csepi Árpád : The port is in automatic mode and waiting for a command! May 6, 2025 at 6:44 PM, Mohammad Amir : I have resolved the issue ✅. Please raise UR again from P01. I am monitoring. Thank you very much! May 6, 2025 at 6:51 PM, Csepi Árpád : Thank you for your help! The shipment has started. May 6, 2025 at 6:52 PM, Mohammad Amir : You are welcome ✅ I am monitoring the transfer command for smooth delivery. Thank you very much! May 6, 2025 at 6:53 PM, FA-CS-AGV-Masoud : @Csepi Árpád May 6, 2025 at 7:02 PM, Mohammad Amir : Carrier U022125 has been successfully stored in M0STK033 at 19:01. ✅ Feel free to contact me again if you face any issue. Thank you very much! May 6, 2025 at 7:10 PM, Csepi Árpád : “Thank you very much for the information!” May 6, 2025 at 7:10 PM, Mohammad Amir : You are welcome! May 6, 2025 at 10:36 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK027_C01 there is Crane fork left collapse detect error. Jobs are pending because of this. Thank you! May 6, 2025 at 10:37 PM, Mohammad Amir : @FA @Édl Tamás Please check M0STK012_C01 there is Crane abnormal start time out error and it is also blocking transfers. Thank you very much! May 6, 2025 at 10:40 PM, Édl Tamás : @FA @Édl Tamás Please check M0STK012_C01 there is Crane abnormal start time out error and it is also blocking transfers. Thank you very much! May 6, 2025 at 10:44 PM, Csepi Árpád : “The crane repair is ongoing! I will let you know once it is completed.” May 6, 2025 at 10:44 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 10:49 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 7, 2025 at 12:11 AM May 7, 2025 at 12:11 AM, Mohammad Amir : @Csepi Árpád Please check M3MFA300_P20 it is OOS and because of this one job is Alternated. Thank you very much! May 7, 2025 at 12:14 AM, Mohammad Amir : @Csepi Árpád Is there any update on the repair of M0STK027_C01,it is still OOS ,one job is pending for a long time. Thank you very much! May 7, 2025 at 12:20 AM, Magosi Erik : Port is in manual mode as it has to be. Agv delivered a waste plt. Is there still any issue? May 7, 2025 at 12:21 AM, Mohammad Amir : @Csepi Árpád is already checking the issue. He will respond. Thank you very much! May 7, 2025 at 12:22 AM, Magosi Erik : I replied to M3MFA300_P20 port issue. If its the same than good. Sorry, thank You May 7, 2025 at 12:23 AM, Mohammad Amir : Yes issue still exists that's why job is pending. Port is still not in service. Thank you very much May 7, 2025 at 12:29 AM, Brázik János : Solved May 7, 2025 at 12:29 AM, Mohammad Amir : Thank you very much! May 7, 2025 at 12:30 AM, Magosi Erik : I set the port to automatic mode. It will be good now i think. I saw a job for the port on RTD. The source of the is was the operators made a load request whrn cleaning. Sorry May 7, 2025 at 12:32 AM, Mohammad Amir : Thank you very much. So should I cancel the generated job? May 7, 2025 at 12:33 AM, Magosi Erik : If its not a problem that would be the best. Is it possible? May 7, 2025 at 12:33 AM, Magosi Erik : If so i will set the port to manual mode May 7, 2025 at 12:33 AM, Mohammad Amir : Checking May 7, 2025 at 12:41 AM, Mohammad Amir : I have cancelled the job ✅ And send this carrier back to it's source warehouse. So now issue has been resolved. Feel free to contact me if you need any assistance. Thank you very much! May 7, 2025 at 12:42 AM, Magosi Erik : I will set the port to manual mode now. Thank You Sir May 7, 2025 at 12:42 AM, Mohammad Amir : You are welcome! May 7, 2025 at 12:43 AM, Mohammad Amir : @FA @Csepi Árpád Could you please check M0CNV023_35_027 there is Stop detect error. Thank you! May 7, 2025 at 12:43 AM, Maczó Anikó : Sziasztok 2.-dik emeleten cv037 stop detect error Köszönöm May 7, 2025 at 1:00 AM, Mohammad Amir : @FA @Édl Tamás Could you please check physically why W000103 located at M0CNV023_35_037 is not moving. Everything is good from MCS RTD side ✅. It is blocking materials, please check. Thank you very much! May 7, 2025 at 1:02 AM, Csepi Árpád : “I am already repairing it on-site!” May 7, 2025 at 1:02 AM, Mohammad Amir : Thank you very much 🙏. May 7, 2025 at 1:14 AM, Csepi Árpád : “I need information! ID: W000103; W000100 Which port was the pallet requested for?” May 7, 2025 at 1:17 AM, Mohammad Amir : For W00103 it has job to go to STK021. For W000100 has job to go to M3MFA300_P20. May 7, 2025 at 1:19 AM, Mohammad Amir : @Magosi Erik There is another job for M3MFA300_P20 ,carrier id is W000100 ,should I cancel this one as well and send it back to STK? Is it also mistaken called ? Please confirm. Thank you very much! May 7, 2025 at 1:22 AM, Magosi Erik : Yes it can be cancelled. We have enough waste plt. Sorry for the inconvenience. Thank You May 7, 2025 at 1:22 AM, Csepi Árpád : “There is a pallet at the P20 port! Yes, I would like you to send both pallets back to the warehouse. ID: W000103; W000100 Thank you very much!” May 7, 2025 at 1:23 AM, Mohammad Amir : I have already resolved the issue for W000103 . ✅ I am working for W000100 now. Thank you very much! May 7, 2025 at 1:25 AM, Mohammad Amir : @Csepi Árpád @Magosi Erik I have cancelled the job for W000100✅ And send this carrier back to it's source warehouse. So now issue has been resolved. Feel free to contact me if you need any assistance. Thank you very much! May 7, 2025 at 1:26 AM, Magosi Erik : Thank You! May 7, 2025 at 1:26 AM, Mohammad Amir : You are welcome! May 7, 2025 at 1:27 AM, Csepi Árpád : “Alright! Thank you as well for your help with the work!” May 7, 2025 at 1:27 AM, Mohammad Amir : You are welcome! May 7, 2025 at 1:32 AM, Maczó Anikó : Sziasztok 2.-dik emeleten waiting for the other party's response cv037 ugyan ez cv036 Köszönöm May 7, 2025 at 3:05 AM, Mohammad Amir : @Csepi Árpád Is there any update on the maintenance of M0CNV023 ,it still under maintenance? Thank you very much! May 7, 2025 at 3:22 AM, Csepi Árpád : “Yes! The repair is still ongoing at the moment.” May 7, 2025 at 3:27 AM, Mohammad Amir : Thank you very much for the update! May 7, 2025 at 3:36 AM, FA-CS-AGV-Masoud : @Csepi Árpád Is the production stopped in raw materials 3-4 ?because one AGV stopped in front of the port which is on manual mode and AGV waiting for loading material May 7, 2025 at 3:57 AM, Csepi Árpád : Yes May 7, 2025 at 4:35 AM, Csepi Árpád : “There is an error on the 2F M0CNV023 section! I need PLC assistance with it!” May 7, 2025 at 6:01 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 7, 2025 at 6:15 AM, FA/CS/AGV/Taimur : @MCS Can you please check carrier: Z302021 in F0BPM011_P01 box packing has a error”Progress status of the tray is not for waitFotRule.” Thanks May 7, 2025 at 6:19 AM, Shahbaz 샤바즈 MCS/RTD : Is it P02? the given pallet is showing on P02 in MCS and P01 is currently empty. May 7, 2025 at 6:26 AM, FA/CS/AGV/Taimur : This message was deleted. May 7, 2025 at 6:28 AM, FA/CS/AGV/Taimur : Yes Its in: F0BPM011_P02. Thanks May 7, 2025 at 6:28 AM, Shahbaz 샤바즈 MCS/RTD : So Z302021 is still at P02 physically? May 7, 2025 at 6:28 AM, FA/CS/AGV/Taimur : Yes. May 7, 2025 at 6:30 AM, Shahbaz 샤바즈 MCS/RTD : Then next pallet can’t be deposited until this one is removed from the port. May 7, 2025 at 6:32 AM, Shahbaz 샤바즈 MCS/RTD : @FA 2F M0CNV023 is OOS. Please check. Thank you. May 7, 2025 at 6:47 AM, KIM SEYEON [김세연]_FA : checking May 7, 2025 at 6:53 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 7 Time: 06:00~18:00 1. Jeong Woo-jun May 7, 2025 at 7:01 AM, FA/CS/AGV/Taimur : Hi @Jun(정우준)_SKOH FA , can you please delete the ACS job for GF_Raw Material 3-4 line module side Carrier ID: W000229 Agv: M0MGV042_VC01. The UR was unnecessary as the carrier not ready to sent back to stk. Thank you May 7, 2025 at 7:04 AM, Jun(정우준)_SKOH FA : can you wit 10min? May 7, 2025 at 7:04 AM, FA/CS/AGV/Taimur : It has been removed already. Thank you for your help. May 7, 2025 at 7:07 AM, Shahbaz 샤바즈 MCS/RTD : I cancelled it from MCS. Thanks May 7, 2025 at 7:23 AM, Jun(정우준)_SKOH FA : thank you May 7, 2025 at 7:30 AM, 윤성제(Yoon SungJe) : @FA @RTD Hello. Is there a problem with M0STK021,27?M3MFA300_P17,18,29 M4MFA300_P18,29 are all queued. May 7, 2025 at 7:34 AM, N.Gábor F.A. : Hello There is no problem with the warehouses, there is a problem with the conveyor system on the 2nd floor, because of this there is no raw material supply on the lines. We ask for your patience, we are working on the problem. May 7, 2025 at 7:42 AM, FA/CS/AGV/Taimur : @Shahbaz 샤바즈 MCS/RTD can you please cancel the pending job for port: F0BPM011_P02 in GF_Cell_Buffer with Carrier: Z302036 AGV: VC05 The port is occupied with stuck carrier: Z302021 pallet already. ALSO can you please sent it back to origin. Thanks Thank you. May 7, 2025 at 7:45 AM, Shahbaz 샤바즈 MCS/RTD : Please put the AVG in auto mode. May 7, 2025 at 8:01 AM, FACS_JaewonShin : ■ 7th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi Daily(12:00 - 18:00) : 2 people - PLC Control 2 Jin taehyeong Jin jaejeong May 7, 2025 at 8:12 AM, FACS_Hyeongi Son : I got rid of it now May 7, 2025 at 8:17 AM, FACS_Hyeongi Son : Where should go for the removed part? May 7, 2025 at 8:17 AM, 윤성제(Yoon SungJe) : @FACS_JaewonShin 안녕하세요 팀장님 이 내용 확인 해 주실수 있으실까요? 모듈라인 자재공급안되어 라인 정지상태입니다 May 7, 2025 at 8:18 AM, 윤성제(Yoon SungJe) : @FACS_JaewonShin May 7, 2025 at 8:20 AM, Shahbaz 샤바즈 MCS/RTD : Probably inside cell packaging and will be removed with UR from F0BPM011_P04 May 7, 2025 at 8:51 AM, 송호석(Ho seok song) : @배병민 (Bae Byoungmin) 당건 진행상황 문의드립니다 피엠님. LOWER CASE 공급 문제로 설비 정지중입니다. [비가동 시간] 3라인 07:36 ~ 4라인 08:20 ~ May 7, 2025 at 9:11 AM, 송호석(Ho seok song) : @연해리 진행상황 공유 부탁드립니다. 현장 라인 맞춰서 운영 필요합니다(장기 비가동 예상 시 설비 점검 등) 대략 2F 컨베이어 쪽 문제로 알고 있으나, 급한 조치 완료 되시면 이슈 내용 공유 부탁드립니다. *참고 금일 3,4,8라인 생산 필요. May 7, 2025 at 9:15 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK035 error. Thank you May 7, 2025 at 9:22 AM, KIM SEYEON [김세연]_FA : @송호석(Ho seok song) 안녕하십니까 늦어서 죄송합니다. 조치완료 되었습니다. May 7, 2025 at 9:25 AM, 송호석(Ho seok song) : 확인 감사합니다 피엠님. 물류 이동 확인하겠습니다. @윤성제(Yoon SungJe) 중지 상태 오토런 각 라인 다시 잡아주세요 주임님. May 7, 2025 at 9:26 AM, 윤성제(Yoon SungJe) : 네 알겠습니다 May 7, 2025 at 9:27 AM, KIM SEYEON [김세연]_FA : @연해리 라인 가동 정상화되는지 LV로 확인 부탁드립니다. May 7, 2025 at 9:28 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check fa technicians placed at module area for error reset. May 7, 2025 at 9:30 AM, 연해리 : 네 알겠습니다 May 7, 2025 at 10:20 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK027 and M0STK035 error. Thank you May 7, 2025 at 10:21 AM, N.Gábor F.A. : Checking May 7, 2025 at 10:33 AM, Shahbaz 샤바즈 MCS/RTD : M0STK023 as well. Thank you. May 7, 2025 at 11:03 AM, Roland : Hello. Can you check M0STK027 - MCP Front Door open error, please? Thank you May 7, 2025 at 11:06 AM, F.A.Balazs : in this case, repair is underway May 7, 2025 at 11:31 AM, Gabor(priv) : Please check line8 cell agv! Agv did not take empty cell plts from the line, and the lines is stopped due to this issue! May 7, 2025 at 11:40 AM, Duna Don : Now AGV is working. Thanks! May 7, 2025 at 1:51 PM, 윤성제(Yoon SungJe) : @MCS Hello. Can you delete the M8MFA300_P17 return command? AGV has loaded empty palette with nothing. May 7, 2025 at 1:54 PM, Shahbaz 샤바즈 MCS/RTD : Is the pallet loaded on AGV? There is a job for Q004693 but the location is NA. May 7, 2025 at 1:56 PM, 윤성제(Yoon SungJe) : It only has a palette and nothing is on it. May 7, 2025 at 1:58 PM, Shahbaz 샤바즈 MCS/RTD : Ok aborted. May 7, 2025 at 1:59 PM, 윤성제(Yoon SungJe) : I have checked, and thank you so much. May 7, 2025 at 2:03 PM, 윤성제(Yoon SungJe) : @진재정 안녕하세요 8라인 어퍼 투입완료했습니다 May 7, 2025 at 4:22 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK024 error. Thank you May 7, 2025 at 4:26 PM, FACS_TaehyeongJin : Solved May 7, 2025 at 7:01 PM, VK (mcs) : @FA Good evening 2nd cell buffer M0STK012 and also M0STK031 Indicates alarm : Fire sensor abnormal state. Please confirm. May 7, 2025 at 7:04 PM, Zoltán Harasztia FA : These warehouses have been showing an error for a while, most likely due to a faulty sensor. It does not affect operation. May 7, 2025 at 7:04 PM, VK (mcs) : Thanks for confirmation May 7, 2025 at 7:05 PM, Zoltán Harasztia FA : You're welcome. May 7, 2025 at 10:13 PM, VK (mcs) : @FA Please check 2F M0STK 023 MCP 2F op1 light curtain detect error! May 7, 2025 at 10:24 PM, Döme György F.A : Done May 7, 2025 at 11:46 PM, András : Sziasztok 2. emeleten slow detect error May 7, 2025 at 11:47 PM, Döme György F.A : Nemsokára érkezünk May 8, 2025 at 12:03 AM May 8, 2025 at 12:03 AM, VK (mcs) : @FA Please check 2F conveyor M0CNV023(35030) Inverter not ready chain CW/CCW error. May 8, 2025 at 1:47 AM, VK (mcs) : @FA Please check 2nd cell buffer port 11 M0STK012-P11 T703904 is not moving. It seems there is an UNK carrier in front of it. May 8, 2025 at 1:48 AM, VK (mcs) : Also please check M0STK014 Crane move timeout error. Thx May 8, 2025 at 1:49 AM, Sarvajcz Ferenc FA : Im here.. May 8, 2025 at 1:50 AM, Sarvajcz Ferenc FA : Solved May 8, 2025 at 2:49 AM, VK (mcs) : @FA Can you please check it. Problem not solved yet . Thx May 8, 2025 at 3:00 AM, VK (mcs) : A few jobs are pending due to this issue. May 8, 2025 at 3:12 AM, Döme György F.A : It has started. May 8, 2025 at 5:40 AM, 송호석(Ho seok song) : @KIM SEYEON [김세연]_FA @연해리 피엠님, 3, 4LINE 자재 Lift 물류 공급 지연(인버터 동작 불가로 전달받음)되어 전일 생산량 shortage 발생 하였습니다. [전일 생산량] 3Line 생산수량 : 612ea (Target : 792ea, shortage : 80ea) 4Line 생산수량 : 449ea (Target : 470ea, shortage : 20ea) 전일 생산 부족분 커버 위해서 물류 바로 돌아줘야되는데 현재도 정지 상황입니다. 지급으로 대응 부탁드립니다 피엠님들. * 야간 비가동 타임 참고부탁드립니다. #3Line : 01:11~ #4Line : 02:20~ May 8, 2025 at 5:41 AM, KIM SEYEON [김세연]_FA : 네 조치 빠르게 하겠습니다. 죄송합니다. May 8, 2025 at 6:21 AM, 이민영(Minyoung Lee) : 장기비가동 걸리면 캐치업에 많이 어려워요. 수동으로라도 공급되어야 합니다 지원부탁드려요 May 8, 2025 at 6:22 AM, 이민영(Minyoung Lee) : There is a shortage of module production. We need to supply raw materials manually. May 8, 2025 at 6:24 AM, 이민영(Minyoung Lee) : 셀과 다르게 모듈은 고객 납품 일정이 있어서 최우선적으로 챙겨주세요 May 8, 2025 at 6:27 AM, KIM SEYEON [김세연]_FA : 네 다른것보다 최우선으로 챙기겠습니다. 전극 R@R쪽 인력 전부 모듈로 가서 해결하겠습니다. May 8, 2025 at 6:29 AM, Gábor Vercz : Jó reggelt. Légyszíves töröljétek az adatot az OQC portról. Levettük a rendelt palettákat de a port még foglaltat jelez. Így nem tudunk másikat rendelni. Köszönöm. May 8, 2025 at 6:33 AM, Shahbaz 샤바즈 MCS/RTD : Jó reggelt, The data is updated. Please try again. Thank you May 8, 2025 at 6:37 AM, Gábor Vercz : Köszönöm. May 8, 2025 at 6:47 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 8 Time: 06:00~18:00 1. Jeong Woo-jun May 8, 2025 at 6:54 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András, Kiss Balázs Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsokt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 8, 2025 at 7:14 AM, 윤성제(Yoon SungJe) : @MCS hello. Could you delete the command of PS22A-2504160116 M3MFA300_P35? We manually moved the pallet to M3MFA300_P19. May 8, 2025 at 7:17 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Done. May 8, 2025 at 7:19 AM, 윤성제(Yoon SungJe) : Thank you so much. May 8, 2025 at 7:24 AM, KIM SEYEON [김세연]_FA : This message was deleted. May 8, 2025 at 7:30 AM, 윤성제(Yoon SungJe) : @MCS I have one more request. Please delete the command of PF221-2504230007 M3MFA300_P27. I manually put the material in another PORT. May 8, 2025 at 7:33 AM, Shahbaz 샤바즈 MCS/RTD : Done. May 8, 2025 at 7:33 AM, 윤성제(Yoon SungJe) : Thank you very much, T T. May 8, 2025 at 7:42 AM, 윤성제(Yoon SungJe) : Sorry, please delete the JOB of PS22A-2504250247 M4MFA300_P17 as well. I also manually put the material here. May 8, 2025 at 7:43 AM, Shahbaz 샤바즈 MCS/RTD : Done. May 8, 2025 at 7:43 AM, 윤성제(Yoon SungJe) : Thank you very much. May 8, 2025 at 7:44 AM, Shahbaz 샤바즈 MCS/RTD : You’re welcome. May 8, 2025 at 7:46 AM, 송호석(Ho seok song) : @KIM SEYEON [김세연]_FA @연해리 생산이 급해서 현재 버퍼 쪽 자재 수동으로 투입해서 진행중입니다만, 조금 있으면 해당 재고도 소진입니다 피엠님들. 수동 자재 출고 여부 및 Lift 정상가동 진행상황 공유 부탁드립니다. [05.07_실생산량/타겟 수량] -3Line : 612ea/792ea(-180ea) -4Line : 450ea/470ea(-20ea) [05.08_추가필요 생산량/타겟 수량] -3Line : 972ea/792ea(+180ea) -4Line : 490ea/470ea(+20ea) 이상. May 8, 2025 at 7:46 AM, 이민영(Minyoung Lee) : @FA team Can module raw materials be manually fed through a lift on another line? May 8, 2025 at 7:47 AM, KIM SEYEON [김세연]_FA : @배병민 (Bae Byoungmin) 피엠님 현황 공유 부탁드립니다. 현상황에서 모듈 메뉴얼 자재공급 가능한지도 확인 부탁드립니다. May 8, 2025 at 7:50 AM, 송호석(Ho seok song) : @배병민 (Bae Byoungmin) 현장 오시면 연락 주십시요. May 8, 2025 at 7:51 AM, 배병민 (Bae Byoungmin) : 지금 2F에서 조치중입니다. 우선 임시조치로 가능하게 진행중입니다. 저희 테크니션통해서 원자재 우선 수동으로 공급될수있게 지원하겠습니다 May 8, 2025 at 7:55 AM, 배병민 (Bae Byoungmin) : 오류 현황은 세이프티쪽 문제로 도어 접점 또는 케이블 이상으로 추정되고있고 이로인해 판넬 인버터가 전체 다운되는 현상입니다. 도어를 하나씩 확인해서 조치하기에는 시간이 다수 소요되서 임시 케이블 점프하여 진행 해보고있습니다 May 8, 2025 at 8:00 AM, 송호석(Ho seok song) : 네 확인 감사합니다. 세이프티 접점 하나로 묶어 임시 조치 후 lift 정상가동되면 바로 가동 부탁드립니다. 일단 들어가 있는 자재기준 1시간정도는 가동 가능하기에 조치 후 자동으로 공급 받겠습니다. 조치시간이 1시간이상으로 길어질것 같으면 바로 연락주세요. 수동 대응 필요. @윤성제(Yoon SungJe) @유주환(Yoo Joohwan) 쇼티지 예상 자재에 대해서 미리 파악해주세요. 케이스, Bma. May 8, 2025 at 8:09 AM, 송호석(Ho seok song) : @Gabor(priv) May 8, 2025 at 8:12 AM, 윤성제(Yoon SungJe) : 안녕하세요 모듈 자재소진 완료한 빈 팔레트를 수동으로 옮기는게 가능하다면 어디로 옮겨야 할지 알고 계신분 있으실까요? May 8, 2025 at 8:16 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다 May 8, 2025 at 8:28 AM, 송호석(Ho seok song) : 우선 창고 빈공간 or 5라인 빈공간에 놔두셔요. 자재공급 이슈 어느정도 정리되면 빈파렛트 자동화 창고 적치관련 배피엠님께서 도움주실예정 입니다. May 8, 2025 at 8:30 AM, 윤성제(Yoon SungJe) : 아 방금 이민호pm님과 연락했는데 도크장으로 배출하면 된다고 합니다 May 8, 2025 at 8:36 AM, 윤성제(Yoon SungJe) : @MCSHello, please delete the PS22A-2504250207 M4MFA300_P18 command.We will manually transfer the empty pallet that has used all the materials to the dock. May 8, 2025 at 8:37 AM, Shahbaz 샤바즈 MCS/RTD : Done May 8, 2025 at 8:40 AM, Gabor(priv) : I just checked the dock, there is no space for the empty plts. Temporary move to line5 empty area. May 8, 2025 at 8:40 AM, 윤성제(Yoon SungJe) : Thank you so much. May 8, 2025 at 8:40 AM, 배병민 (Bae Byoungmin) : 2F 컨베어 정상화되어 자재 이송중입니다 May 8, 2025 at 8:47 AM, 송호석(Ho seok song) : 현장 최종 정리까지 마무리 도움 부탁드립니다 피엠님. 현장 급한 자재부터 빈파렛 올리고 있고, 신규 자재 job 형성 확인중입니다. May 8, 2025 at 8:48 AM, 배병민 (Bae Byoungmin) : 네 제가 계속 현장서 비가동 안되도록 챙기겠습니다. 현장 정리도 마무리 지원하겠습니다 생산에 차질을 드려 죄송합니다. May 8, 2025 at 6:15 PM, VK (mcs) : @FA Please check M0STK023 Crane STK action 5 min time over error. May 8, 2025 at 8:33 PM, VK (mcs) : @FA Please check M0STK023 MCP 0140MC03, MC04 on inverter power. May 8, 2025 at 8:35 PM, Döme György F.A : I'm here.Working now. May 8, 2025 at 8:46 PM, 배병민 (Bae Byoungmin) : Can the problem be solved right away? May 8, 2025 at 8:49 PM, VK (mcs) : Alarm cleared at 20:33 May 8, 2025 at 8:49 PM, 배병민 (Bae Byoungmin) : Thank you goog job May 8, 2025 at 10:27 PM, VK (mcs) : @FA Please check 2F M0STK023 MCP 2F OP1 light curtain detect error. May 8, 2025 at 10:28 PM, Döme György F.A : On my way May 8, 2025 at 10:30 PM, Döme György F.A : Solved May 8, 2025 at 11:09 PM, András : Sziasztok 2. emeleten inverter not ready CW/CCW May 8, 2025 at 11:12 PM, VK (mcs) : @FA Please check M0STK033 Crane STK action 5 min time over error. May 8, 2025 at 11:13 PM, Zoltán Harasztia FA : Solved May 8, 2025 at 11:14 PM, KIM SEYEON [김세연]_FA : @Döme György F.A please check May 8, 2025 at 11:14 PM, Döme György F.A : On my way May 8, 2025 at 11:14 PM, KIM SEYEON [김세연]_FA : thank you for your hard work!!!! May 8, 2025 at 11:24 PM, 배병민 (Bae Byoungmin) : Please let me know the progress of the 2F measures. May 8, 2025 at 11:25 PM, Döme György F.A : Resolved. The error could be cleared with an acknowledgment and the system could be restarted. There was an inverter fault from CV26 to CV35 — interestingly, the conveyor was empty. May 8, 2025 at 11:26 PM, 배병민 (Bae Byoungmin) : Was it a light curtain detection problem? May 8, 2025 at 11:29 PM, Döme György F.A : It didn't report any light curtain error. This time it didn't shut down the lift, only the 2F conveyor line. May 8, 2025 at 11:32 PM, 배병민 (Bae Byoungmin) : Ok, thank you for your hard work. Please organize the errors at night and share them with us during the week. I will check them. May 8, 2025 at 11:34 PM, Döme György F.A : Okay May 9, 2025 at 12:19 AM May 9, 2025 at 12:19 AM, VK (mcs) : @FA Please check 2F M0STK026 Crane shelf in abort( double cargo) May 9, 2025 at 12:23 AM, Zoltán Harasztia FA : Solved May 9, 2025 at 1:58 AM, András : 2. emeleten Stop detect errer May 9, 2025 at 1:58 AM, Döme György F.A : Úton May 9, 2025 at 2:26 AM, VK (mcs) : @FA Please check 1st cell buffer M0STK011 -P11 UNK carrier is alternated. Destination is STK 12 but current capacity is 98% May 9, 2025 at 2:27 AM, Döme György F.A : Checking May 9, 2025 at 2:46 AM, Döme György F.A : The material in question (R110595) is already in Cell Buffer 4 (0201109), I just checked it. Therefore, I will delete the crane task from the SCS. May 9, 2025 at 2:48 AM, VK (mcs) : Thank you for confirmation May 9, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 9, 2025 at 6:04 AM, 방혁 PM(Bang.Hyuk) FA : Day Shift FA Technician Schedule Date: 25. May. 9 Time: 06:00~18:00 1. BANG HYUK May 9, 2025 at 7:18 AM, Niki (Modul) : Jó reggelt fiúk @Denkó Jani (F.A.) @Boromisza Zoltán nagy a gáz fent!!! Hátul a raktár és a fóliázógép is piros!!! May 9, 2025 at 7:20 AM, Horváth Adriàn : @Denkó Jani (F.A.) 4es sorn endplate gantry is megfeküdt May 9, 2025 at 7:21 AM, Boromisza Zoltán : Megyek May 9, 2025 at 7:22 AM, Ákos (Modul 2.E.) : Elöl megvan csak a raktárban van hiba köszönjük May 9, 2025 at 7:30 AM, Denkó Jani (F.A.) : Megyek May 9, 2025 at 7:37 AM, Denkó Jani (F.A.) : Kész May 9, 2025 at 7:49 AM, Boromisza Zoltán : Kész May 9, 2025 at 7:57 AM, FACS_JaewonShin : ■ 9th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 9, 2025 at 8:03 AM, duzzaman Md (MCS) : @FA Please check 2F M0STK023_C01 CRANE FORK RIGHT COLLAPSE detect 1. May 9, 2025 at 8:28 AM, duzzaman Md (MCS) : @FA Please check M0STK027_C01 Crane fork right collapse detect Thanks May 9, 2025 at 8:34 AM, duzzaman Md (MCS) : M0STK012 is OOS. PLEASE CHECK. May 9, 2025 at 8:35 AM, Boromisza Zoltán : Solved May 9, 2025 at 8:37 AM, FACS_TaehyeongJin : Solved May 9, 2025 at 8:41 AM, Denkó Jani (F.A.) : Solved May 9, 2025 at 9:00 AM, duzzaman Md (MCS) : Kindly check M0STK028_C01 CRANE FORK RIGHT COLLAPSE DETECT 2 M0CNV036_P13_BP01 Stop detect error May 9, 2025 at 9:18 AM, FACS_Hyeongi Son : M0STK028_C01 solved Now going M0CNV036 May 9, 2025 at 9:20 AM, FACS_Hyeongi Son : M0CNV036 also solved May 9, 2025 at 9:21 AM, Denkó Jani (F.A.) : 🤝 May 9, 2025 at 9:21 AM, FACS_Hyeongi Son : 👍 May 9, 2025 at 9:23 AM, Denkó Jani (F.A.) : 💪🏻 May 9, 2025 at 9:25 AM, KIM SEYEON [김세연]_FA : good May 9, 2025 at 10:21 AM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 CRANE FORK RIGHT COLLAPSE detect 1. Since 09:37 May 9, 2025 at 10:25 AM, Boromisza Zoltán : Okey May 9, 2025 at 10:34 AM, Boromisza Zoltán : Solved May 9, 2025 at 10:35 AM, Beatrix : @MCS/RTD Hello! PS230-2412090004 is not coming outside. Can you help me? Location: 06/15/02 Please send to: M0CNV021 M03/04 May 9, 2025 at 10:39 AM, duzzaman Md (MCS) : Could you please confirm the carrier number? Is it PS290-2412090004 May 9, 2025 at 10:42 AM, Beatrix : Yes, thank you. PS290-2412090004 May 9, 2025 at 10:42 AM, Boromisza Zoltán : Úton May 9, 2025 at 10:45 AM, duzzaman Md (MCS) : As we see its moving.current location is CNV021_BP02 May 9, 2025 at 10:50 AM, Beatrix : Thank you. This is arrived May 9, 2025 at 11:00 AM, 배병민 (Bae Byoungmin) : @송호석(Ho seok song) 화성 Cell buffer 2번창고 지난 천장 누수 이벤트건 보수작업 완료되어 누수구간 최종 점검 후 재기동 진행하겠습니다. 2번창고 15분정도 비가동 발생되겠습니다. May 9, 2025 at 11:03 AM, 송호석(Ho seok song) : 네 진행하셔도 됩니다. May 9, 2025 at 11:12 AM, duzzaman Md (MCS) : @Denkó Jani (F.A.) Please check M0STK035_C01 MCP 1F HP1 LIGHT CURTAIN DETECT ERROR THANK YOU May 9, 2025 at 11:12 AM, duzzaman Md (MCS) : Also M0STK012 , Crane is OOS May 9, 2025 at 11:17 AM, 배병민 (Bae Byoungmin) : 점검 완료 되어 재기동 시작하였습니다. 누수구간 물기 없는거 확인 되어 해당 Rack 구간 열연 감지 센서 재 설치하였으며 센서 정상동작여부 이상없이 작동중입니다. May 9, 2025 at 11:17 AM, Denkó Jani (F.A.) : Solved May 9, 2025 at 1:09 PM, Beatrix : @MCS/RTD Hello! These plts not coming outside. PS230-2412090042 Location: 0200804 Please send to: M0CNV021 PS230-2504160002 Location: 0102804 M0CNV022 these locations are in RTD. I didn't find these plts in WMS. Can you please help me? May 9, 2025 at 1:21 PM, duzzaman Md (MCS) : Both jobs has been created. Thank you May 9, 2025 at 1:26 PM, Beatrix : Thank you too May 9, 2025 at 1:26 PM, 윤성제(Yoon SungJe) : @FA 안녕하세요 모듈 GF 도크장 앞 에러로 인해 AGV대기상태입니다 확인 해 주실수 있을까요? AGV번호 8,1번 May 9, 2025 at 1:27 PM, FA CS AGV Jawad : I check it. May 9, 2025 at 1:30 PM, FA CS AGV Jawad : AGV 8 is line out AGV and 1 is on charging status. I dont see any error. May 9, 2025 at 1:33 PM, 윤성제(Yoon SungJe) : @MCSHello, there is no JOB for U014177. Can you check it? May 9, 2025 at 1:34 PM, duzzaman Md (MCS) : Yes, there is no job currently for this carrier. Its at M0CNV031_P01 Thank you May 9, 2025 at 1:37 PM, 윤성제(Yoon SungJe) : This is a dunnage pallet with modules. Can you create a job? It is now at M0CNV031_P01. May 9, 2025 at 1:38 PM, duzzaman Md (MCS) : Could you tell me where you'd like it to be sent ? May 9, 2025 at 1:38 PM, 윤성제(Yoon SungJe) : You can go into the warehouse. May 9, 2025 at 1:39 PM, Beatrix : Hello. Still these are not coming outside. May 9, 2025 at 1:43 PM, duzzaman Md (MCS) : Job have been created. And transferring now. May 9, 2025 at 1:44 PM, duzzaman Md (MCS) : On it May 9, 2025 at 1:44 PM, 윤성제(Yoon SungJe) : I'm on the move now, and thank you for your help. May 9, 2025 at 1:51 PM, Roland : Truck is waiting for these two pallets, please check it! May 9, 2025 at 1:53 PM, 이민호 MINHO : Queue 상태로 30분째 있는데 확인 부탁드리겠습니다 May 9, 2025 at 2:02 PM, duzzaman Md (MCS) : This message was deleted. May 9, 2025 at 2:04 PM, duzzaman Md (MCS) : Route doesn't exist between the source and destinations you mentioned. No routes from STK 024 to CNV021 and STK 025 to CNV 022 May 9, 2025 at 2:06 PM, Sazzad Bhai SKon : Please tell us another CNV. Because between M0STK024 and M0CNV021_M01, no route exist May 9, 2025 at 2:07 PM, Roland : M0CNV021_M03 or M04 May 9, 2025 at 2:09 PM, Sazzad Bhai SKon : M03 available May 9, 2025 at 2:10 PM, Roland : Okay May 9, 2025 at 2:10 PM, Beatrix : Okay this is good May 9, 2025 at 2:12 PM, Sazzad Bhai SKon : Transfer initiated May 9, 2025 at 2:12 PM, Sazzad Bhai SKon : I sent ***0042 to M03 May 9, 2025 at 2:15 PM, duzzaman Md (MCS) : For 2nd one it is initiated as well to cnv021 m03 May 9, 2025 at 2:21 PM, Beatrix : PS230-25041600002 in 2nd floor right now May 9, 2025 at 2:21 PM, Beatrix : This is going to production? May 9, 2025 at 2:23 PM, Sazzad Bhai SKon : It has job for M0CNV021_M03 May 9, 2025 at 2:23 PM, Sazzad Bhai SKon : It'll come to M03 May 9, 2025 at 2:29 PM, Roland : Thank you so much May 9, 2025 at 2:30 PM, Beatrix : Thank you May 9, 2025 at 2:31 PM, Sazzad Bhai SKon : We really appreciate your patience. Thank you for your support as well. @Beatrix @Roland 🙏 May 9, 2025 at 2:39 PM, Sazzad Bhai SKon : M01 and M02 are IN put port. This is the reason job was not created initially. M03/M04 is out put port. May 9, 2025 at 2:40 PM, Tóth Gyula : MOCNV033 M_02 állomáson nem mennek be a Dunnagèk. May 9, 2025 at 2:44 PM, 배병민 (Bae Byoungmin) : @송호석(Ho seok song) PM님 모듈 1F 8라인 추가 생산 계획은 당분간 없으신거죠? 추가 생산 없으시면 AGV 대기위치 주차해두고 전원 Off 하려고 합니다 May 9, 2025 at 2:45 PM, 유주환(Yoo Joohwan) : 없습니다 May 9, 2025 at 2:47 PM, Sazzad Bhai SKon : Transfer initiated now May 9, 2025 at 2:47 PM, Denkó Jani (F.A.) : Solved May 9, 2025 at 3:00 PM, FACS_Youngmin LEE : @agv All AGVs on the first floor have been lined out because there are no production plans. May 9, 2025 at 3:12 PM, 송호석(Ho seok song) : 네 피엠님, 8라인 생산 계획은 따로 없고 CW21주차부터 1라인 추가 생산 계획 잡혀있습니다. 해당 시기 GF 3개소 라인 런 예정이니 일정 참고 부탁드립니다. May 9, 2025 at 3:12 PM, 배병민 (Bae Byoungmin) : 네 공유 감사합니다 May 9, 2025 at 3:47 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Nem kapunk ürws Dunnaget a sorokhoz. Pls check May 9, 2025 at 3:48 PM, Denkó Jani (F.A.) : Mert nem megy pár darunk,rajta vagyunk az ügyön Türelem May 9, 2025 at 3:59 PM, duzzaman Md (MCS) : @FA Kindly check M0STK033_C01 MCP 1F OP LIGHT CURTAIN DETECT ERROR May 9, 2025 at 4:00 PM, FACS_TaehyeongJin : Working on it May 9, 2025 at 4:02 PM, Niki (Modul) : @Denkó Jani (F.A.) hiányol a gép 🤣 foliázonál gond van May 9, 2025 at 4:07 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. May 9, 2025 at 4:10 PM, 승규 (BAEK SEUNGGYU) : @FA M3MFA300_P06 Please check. There is a delay in Donnage supply. Please check from here. There is a delay in Donnage supply. May 9, 2025 at 4:11 PM, Denkó Jani (F.A.) : Mert nem megy pár darunk,rajta vagyunk az ügyön Türelem May 9, 2025 at 4:12 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son @진재정 @FACS_TaehyeongJin 해당 오류 같이 확인 및 조치 부탁드립니다. May 9, 2025 at 4:15 PM, Denkó Jani (F.A.) : 소년들은 함께 일하고 있어요... May 9, 2025 at 4:37 PM, Kiara : @Denkó Jani (F.A.) fóliázó gép ☠️ May 9, 2025 at 4:37 PM, duzzaman Md (MCS) : Dear @Denkó Jani (F.A.) Please check M0STK033_C01 MCP SMC1 DISCONNECTED ERROR May 9, 2025 at 4:39 PM, Denkó Jani (F.A.) : yes, we know there's a problem with it, several of us are working on it, in vain they type it in every existing language every 5 minutes.... thank you for your patience. May 9, 2025 at 4:39 PM, 유주환(Yoo Joohwan) : M0STK033 설비에서 나오는 더니지 잡혀있는거 다 삭제 해주세요 May 9, 2025 at 4:39 PM, 유주환(Yoo Joohwan) : 3,4라인 설비 다 잡혀 있습니다 May 9, 2025 at 4:40 PM, 배병민 (Bae Byoungmin) : 네 지금 삭제중입니다 May 9, 2025 at 4:54 PM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! May 9, 2025 at 4:57 PM, 유주환(Yoo Joohwan) : M0STK032 설비에서 나오는 더니지 잡혔습니다 근방 공급 될거같습니다 May 9, 2025 at 5:10 PM, FACS_Hyeongi Son : M0STK033 조치완료했습니다 May 9, 2025 at 6:00 PM, 승규 (BAEK SEUNGGYU) : @mcs M4MFA300_P06 carrier ID U014171 It seems that there is a job that has already been completed. Please check it. May 9, 2025 at 6:01 PM, Mohammad Amir : Checking May 9, 2025 at 6:03 PM, Mohammad Amir : Please confirm me the current location of this carrier . Thank you very much! May 9, 2025 at 6:09 PM, 승규 (BAEK SEUNGGYU) : The catch is complete and it seems that the catch remains without disappearing. May 9, 2025 at 6:11 PM, Mohammad Amir : Sure Sir, This issue has been been resolved ✅. Please confirm me the current location of this carrier. There is another issue that's why UR is getting failed. Thank you very much! May 9, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 9, 2025 at 6:15 PM, Mohammad Amir : Sir, Issue has been resolved ✅. Could you please raise Unload request again. Thank you very much! May 9, 2025 at 6:21 PM, 승규 (BAEK SEUNGGYU) : It is confirmed that the warehouse of the Dungee has been loaded. May 9, 2025 at 6:24 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Cv021 stop detect error Rtv carcv ccw run time delay Köszönöm May 9, 2025 at 6:25 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV023_RTV04 there is RTV Car CCW run time delay error. Thank you very much! May 9, 2025 at 6:43 PM, Édl Tamás : Solved May 9, 2025 at 6:43 PM, Mohammad Amir : Thank you very much! May 9, 2025 at 11:22 PM, Csepi Árpád : @Mohammad Amir There is a pending transport task on the M0OQC001_P01 port. ID: U014171. May 9, 2025 at 11:22 PM, Mohammad Amir : There was an issue that's why Job was not getting created. I have resolved the issue.✅. Please press UR again . I am monitoring. Thank you very much! May 9, 2025 at 11:23 PM, Csepi Árpád : There was an issue that's why Job was not getting created. I have resolved the issue.✅. Please press UR again . I am monitoring. Thank you very much! May 9, 2025 at 11:30 PM, Csepi Árpád : The transporter has started! Thank you for your work. May 9, 2025 at 11:30 PM, Mohammad Amir : UR has been received successfully at 23:29. ✅ Job has been created to STK031. I am monitoring the transfer for smooth delivery. Thank you very much! May 9, 2025 at 11:40 PM, Mohammad Amir : The carrier U014171 has been successfully stored in M0STK031(0201204) at 23:39. ✅ Please feel free to reach out to me again if you need any assistance. Thank you very much! May 10, 2025 at 1:39 AM May 10, 2025 at 1:39 AM, Maczó Anikó : Sziasztok 2.-dik emeleten Floor in position error Gf stop time over Köszönöm May 10, 2025 at 1:52 AM, Magosi Erik : @Csepi Árpád kitudnál pliiz jönni a 3as 4es sor közti alapanyag lifthez? Köszike May 10, 2025 at 1:56 AM, Csepi Árpád : Javítva a hiba! May 10, 2025 at 1:56 AM, Csepi Árpád : El készült! May 10, 2025 at 1:56 AM, Magosi Erik : Köszi May 10, 2025 at 3:46 AM, Mohammad Amir : @Csepi Árpád Please check M0STK028_C01 there is Crane fork left collapse detect 2 error. Thank you very much! May 10, 2025 at 3:58 AM, Csepi Árpád : Solved May 10, 2025 at 4:04 AM, Mohammad Amir : Köszönom szepen! May 10, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 7/12 Tech, 1Sl Overtime(0): Holiday(3): Pintye Miklós, Kovács Ágnes, Boromisza Zoltán Sick(2): Gerbovits Kevin, BöröczbTamás --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(1): Denkó János --------------- The number of technicians is low. In all areas. May 10, 2025 at 7:29 AM, Kurkó Péter : Hello valaki nézzen rá a dunnage raktárra mert a 4line várja az üres dunnaget Köszi May 10, 2025 at 7:32 AM, Denkó Jani (F.A.) : Hamarosan érkezik a szajré 🫡🤙🏻 May 10, 2025 at 8:48 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK023_C01 there is Crane fork left collapse detect 1 error. Thank you! May 10, 2025 at 8:55 AM, Denkó Jani (F.A.) : Solved May 10, 2025 at 10:25 AM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx 9 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. May 10, 2025 at 10:25 AM, Shahbaz 샤바즈 MCS/RTD : Checking May 10, 2025 at 10:30 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for all 9 “Full” pallets starting with W00XXX to M0CNV021_M03/M04. Thank you May 10, 2025 at 10:34 AM, 윤경환 : Thank you.👍 May 10, 2025 at 10:51 AM, Niki (Modul) : @Denkó Jani (F.A.) "Cicám" [F7200] wrapper wrap residual det. Nem süti el rendesen a fóliát! May 10, 2025 at 11:26 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA can you check it please, we have a mechanikal problem on this machine. one cylinder not moving well. please contact with @Denkó Jani (F.A.) . Thank You. May 10, 2025 at 11:29 AM, 배병민 (Bae Byoungmin) : Is the 2F wrapping machine conveyor not working? May 10, 2025 at 11:36 AM, Szücs Géza FT-B : yes May 10, 2025 at 11:39 AM, Denkó Jani (F.A.) : Solved May 10, 2025 at 11:42 AM, 배병민 (Bae Byoungmin) : Ok,thank you. If there is any part that is difficult to handle, please ask. I am at the electrode. May 10, 2025 at 11:42 AM, Denkó Jani (F.A.) : One of the working cylinders is stuck in the housing in which it would move. I just adjusted the air pressure and loosened the screws. It is currently working, but this solution cannot be considered a permanent solution. This part will probably need to be replaced soon. May 10, 2025 at 11:42 AM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz help at STK011_P06, there is data mismatch alarm May 10, 2025 at 11:42 AM, Denkó Jani (F.A.) : Sure, going 🫡 May 10, 2025 at 11:59 AM, Denkó Jani (F.A.) : Solved May 10, 2025 at 12:00 PM, FA CS AGV Jawad : Thank you so much May 10, 2025 at 2:19 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK011_C01 “Crane order shelf LD cage in work X” Thank you May 10, 2025 at 2:30 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz help at STK 11...Fork Left collapse error May 10, 2025 at 2:32 PM, Denkó Jani (F.A.) : I'm still working on the crane.🤝 May 10, 2025 at 2:33 PM, FA CS AGV Jawad : Thanks 🙏 May 10, 2025 at 2:51 PM, Horváth Adriàn : @Denkó Jani (F.A.) Dokk folyosón sír a magasraktàr. Check pliiiz. 😁 May 10, 2025 at 2:56 PM, Denkó Jani (F.A.) : Türelem May 10, 2025 at 2:57 PM, Denkó Jani (F.A.) : Addig próbáld meg vigasztalni 🙄😅😅 May 10, 2025 at 2:57 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK035_C01 “Crane rack position not detect error” Thank you May 10, 2025 at 3:09 PM, Denkó Jani (F.A.) : Solved 🫡 May 10, 2025 at 3:09 PM, Denkó Jani (F.A.) : Going May 10, 2025 at 3:09 PM, Shahbaz 샤바즈 MCS/RTD : Köszönöm szépen May 10, 2025 at 3:11 PM, Denkó Jani (F.A.) : Solved May 10, 2025 at 3:21 PM, Niki (Modul) : @Denkó Jani (F.A.) CV015 May 10, 2025 at 3:22 PM, Niki (Modul) : Nálunk a monitoron ki se jelzi,hogy gond van May 10, 2025 at 3:24 PM, Denkó Jani (F.A.) : Solved May 10, 2025 at 3:31 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK022_C01 error. Thank you May 10, 2025 at 3:32 PM, Denkó Jani (F.A.) : I see, please wait....There are a lot of errors right now... everywhere 😂 May 10, 2025 at 3:33 PM, Shahbaz 샤바즈 MCS/RTD : Yes, sure. Thank you for your hard work. May 10, 2025 at 3:35 PM, 배병민 (Bae Byoungmin) : I'll take a look at this. May 10, 2025 at 3:36 PM, Denkó Jani (F.A.) : I'm currently on this error, but I'm on 2f because it also indicates an error here, so it's obviously related. If everything is fine here, I'll go and start the crane again. May 10, 2025 at 3:40 PM, 배병민 (Bae Byoungmin) : Ok, I'm in front of the stacker OP box. Let me know when you're ready and I'll get started. May 10, 2025 at 3:42 PM, Denkó Jani (F.A.) : please start May 10, 2025 at 3:42 PM, 배병민 (Bae Byoungmin) : Ok May 10, 2025 at 3:43 PM, Denkó Jani (F.A.) : Super, crane is working 🤝💪🏻 May 10, 2025 at 3:43 PM, 배병민 (Bae Byoungmin) : Good job May 10, 2025 at 3:43 PM, Denkó Jani (F.A.) : Thank you,for helping May 10, 2025 at 3:50 PM, Horváth Adriàn : @Denkó Jani (F.A.) 🐱 minden is feltorlódott a dokk folyosón.😁 May 10, 2025 at 3:53 PM, Denkó Jani (F.A.) : Solved May 10, 2025 at 4:20 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK035_C01 again “Crane rack position not detect error” Thank you May 10, 2025 at 4:21 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz help at STK 11 May 10, 2025 at 4:33 PM, Denkó Jani (F.A.) : Solved May 10, 2025 at 4:35 PM, Shahbaz 샤바즈 MCS/RTD : Thank you!! May 10, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 6:59 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK023_C01 there is MCP 2F OP1 Light curtain detect error. Thank you! May 10, 2025 at 7:16 PM, Csepi Árpád : Solved May 10, 2025 at 7:17 PM, Mohammad Amir : Thank you very much! May 10, 2025 at 7:48 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Conveyor det error F5037 out lift May 10, 2025 at 7:57 PM, Csepi Árpád : El készült! May 10, 2025 at 8:06 PM, Maczó Anikó : Köszönöm May 10, 2025 at 8:16 PM, Csepi Árpád : @Mohammad Amir Hi! Please help! There is a transport task waiting: M0OQC001_P01 port ID: U014525 Thank you very much! May 10, 2025 at 8:16 PM, Mohammad Amir : Checking May 10, 2025 at 8:18 PM, Mohammad Amir : I have resolved the issue. ✅ Please raise UR again. I am monitoring. Thank you very much! May 10, 2025 at 8:21 PM, Csepi Árpád : Thank you very much! The carrier has departed. May 10, 2025 at 8:21 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you need any further assistance. Thank you very much! May 10, 2025 at 9:39 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Cv021 stop detect error [F6013] Cim alive signal error [F753] Köszönöm May 11, 2025 at 4:28 AM May 11, 2025 at 4:28 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK028_C01 there is Crane fork right collapsed Detect 3 error. Thank you very much! May 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12+1+1 Tech, 1Sl Overtime(0): Holiday(2): Kovács Ágnes, 방혁_이반차 Sick(1): Gerbovits Kevin Shift Change(1): Böröczki Balázs --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok May 11, 2025 at 6:25 AM, Kovács Kármen : Jó reggelt! @Denkó Jani (F.A.) @Boromisza Zoltán modul raktár hibát jelez. Nézzétek majd meg légyszíves. Köszönjük May 11, 2025 at 6:26 AM, Boromisza Zoltán : Úton May 11, 2025 at 1:08 PM, Niki (Modul) : @Denkó Jani (F.A.) [F535] [RTV] CAR distanceSensor time delay May 11, 2025 at 1:13 PM, Boromisza Zoltán : Megyek May 11, 2025 at 1:20 PM, Boromisza Zoltán : Kész May 11, 2025 at 2:00 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Line 4 félig jött ki a Dunnage az AGVre. May 11, 2025 at 2:01 PM, Denkó Jani (F.A.) : Az baj May 11, 2025 at 2:02 PM, Horváth Adriàn : Solveeed😁 May 11, 2025 at 2:02 PM, Denkó Jani (F.A.) : Photo May 11, 2025 at 2:03 PM, Horváth Adriàn : Viszont a magasraki is letérdelt. Check pls May 11, 2025 at 2:04 PM, Denkó Jani (F.A.) : Csinálnom May 11, 2025 at 2:05 PM, Denkó Jani (F.A.) : Meg van szolvedálva 🫡 May 11, 2025 at 2:39 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz help me at STK 11...light curtain error May 11, 2025 at 2:47 PM, Denkó Jani (F.A.) : Solved May 11, 2025 at 2:49 PM, FA CS AGV Jawad : Thanks May 11, 2025 at 2:58 PM, Denkó Jani (F.A.) : @Shahbaz 샤바즈 MCS/RTD Please generate a task for the pallet number U013451 on the port M0OQC001_P01 and please send it to M0CNV031_P01, then to one of the warehouses. Thank you May 11, 2025 at 3:01 PM, Shahbaz 샤바즈 MCS/RTD : Please can you Unload request again, it will go automatically. There was a previous job which I cancelled. May 11, 2025 at 3:06 PM, Shahbaz 샤바즈 MCS/RTD : Done May 11, 2025 at 3:22 PM, Denkó Jani (F.A.) : Thank you 🤝 May 11, 2025 at 3:33 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome 🤝 May 11, 2025 at 4:40 PM, Niki (Modul) : @Boromisza Zoltán raktárba megint gond van May 11, 2025 at 4:53 PM, Boromisza Zoltán : Megyek May 11, 2025 at 5:04 PM, Boromisza Zoltán : Kész May 11, 2025 at 7:01 PM, VK (mcs) : @FA Please check M0STK012 Carriers are not transferred: T703423 shelf (0101206) T704053 (0201306) T700813 (0101001) T703533 (0101108) Destination is M0STK011 May 11, 2025 at 7:51 PM, Édl Tamás : @VK (mcs) I would respectfully request that the marked items be removed from paused status. May 11, 2025 at 7:55 PM, VK (mcs) : Status of Carriers in MCS is transferring. I have not access to SCS to modify May 11, 2025 at 7:57 PM, Édl Tamás : thank you for the information May 11, 2025 at 8:09 PM, VK (mcs) : @FA Please check 2F M0STK021 Crane fork right collapse detect 1 May 11, 2025 at 8:20 PM, VK (mcs) : @이주봉PM LEE JUBONG(FA) Can you please check it. According to FA technicians, the status of carriers is paused. Thx May 11, 2025 at 8:21 PM, 배병민 (Bae Byoungmin) : I'll go to the scene. May 11, 2025 at 8:22 PM, VK (mcs) : Thank you May 11, 2025 at 8:30 PM, Édl Tamás : Solved May 11, 2025 at 8:40 PM, Csepi Árpád : Solved May 11, 2025 at 8:41 PM, 배병민 (Bae Byoungmin) : Everything moved normally. May 11, 2025 at 8:42 PM, VK (mcs) : Thank you for confirmation May 12, 2025 at 12:08 AM May 12, 2025 at 12:08 AM, VK (mcs) : @FA Please check Cell buffer M0STK012 Crane fork right collapse detect 4 May 12, 2025 at 12:37 AM, Csepi Árpád : Solved May 12, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Iváncsa "C" shift (06:00-18:00) 12 Tech, 0 SL Beteg(sick ): 1 Sarvajz Ferenc Szabadság(Holisay): 1, Farkas Tamás(SL) Helyettesít(Substitution): 2, Szücs Géza Imre(SL), Boromisza Zoltán Túlóra(Overtime): 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Csuti Zoli Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasz May 12, 2025 at 8:00 AM, 윤성제(Yoon SungJe) : This message was deleted. May 12, 2025 at 8:00 AM, 윤성제(Yoon SungJe) : @Choi Inbo/최인보 @SK 배병민 PM님 SFA 안녕하세요 pm님 4라인 BMA(PS230-2505070059)팔렛트 입고 안된채로 포트 투입됐습니다 확인 가능하실까요? May 12, 2025 at 8:05 AM, András : Sziasztok 2. emeleten GF stop time over May 12, 2025 at 8:05 AM, FACS_JaewonShin : ■ 12th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 12, 2025 at 8:06 AM, Boromisza Zoltán : Megyek May 12, 2025 at 8:09 AM, 윤성제(Yoon SungJe) : @FA Hello, module GF empty pallet is not being discharged. Can you check it? May 12, 2025 at 8:12 AM, Boromisza Zoltán : Kész May 12, 2025 at 8:12 AM, András : Köszi May 12, 2025 at 9:37 AM, 송호석(Ho seok song) : @Choi Inbo/최인보 @최용회 @민지홍 Pm님, 매니저님, 3라인 BMA(PS230-2505070015)자동화 입고 이력은 있는데 mes 재고 조정에 없습니다. 4라인 BMA(PS230-2505070059)도 자동화 입고 이력 있고, mes 재고 내역에 없습니다. 확인 부탁드립니다. May 12, 2025 at 10:00 AM, 윤경환 : @ MCS/RTD Hello. Please move the PS230-2505070015 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. May 12, 2025 at 10:02 AM, Sazzad Bhai SKon : Transfer initiated, crane active May 12, 2025 at 10:03 AM, 윤경환 : Thank you.👍 May 12, 2025 at 10:11 AM, 송호석(Ho seok song) : @연해리 @배병민 (Bae Byoungmin) 모듈라인 생산 계획 변경에 따른 금주 1라인 샘플 생산 계획 잡혀져 있습니다. (#1,3,4Line) 해당 구역 Run을 위한 사전 제반 준비 부탁드립니다. May 12, 2025 at 10:11 AM, 윤경환 : Please check the location of the pallet. May 12, 2025 at 10:13 AM, Sazzad Bhai SKon : It's on the way. Currently on M0CNV023. May 12, 2025 at 10:13 AM, 윤경환 : Thank you.🫡 May 12, 2025 at 10:17 AM, Sazzad Bhai SKon : It's taking a route that costs 30! Stk28 > CNV 23 > STK 22 > CNV 21 May 12, 2025 at 10:25 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) @MCS/RTD team bank : M0STK031 source : 0102201 carrier id : U013526 Dest EQP unit : M0CNV033_M03 @배병민(Bae Byoungmin) 해당 케리어 아이디가 RTD상에서 배출이 인되고 있습니다. 금일 사외창고 이관품이라 확인 부탁드립니다. @MCS/RTD team The product is not generating RTD commands. Can you manually move it to the M0CNV033_M03 port? May 12, 2025 at 10:26 AM, FACS_Hyeongi Son : 이동하겠습니다 May 12, 2025 at 10:30 AM, Sazzad Bhai SKon : This shelf is not occupied. MCS have no loga for this carrier May 12, 2025 at 10:30 AM, Sazzad Bhai SKon : *logs May 12, 2025 at 10:30 AM, Choi Inbo/최인보 : 안녕하세요 자재 자동출고 하는 과정에서 타임아웃 발생하여 모듈mes로 전달 완료가 안됐습니다. 수동 출고 하려고 하는데 몇라인에 사용되는 자재인지 알려주실 수 있으신가요? May 12, 2025 at 10:34 AM, 윤경환 : 2건다 실물 확인 후 수동 출고 완료 하였습니다. May 12, 2025 at 10:35 AM, FACS_Hyeongi Son : 자재 반송합니다 May 12, 2025 at 10:39 AM, 송호석(Ho seok song) : 현장에서는 수동 출고로 입고 받아 우선 자재 수량은 매칭 합니다. 타임 아웃 발생에 따른 전산 I/F 미전송 오류에 대해 조치측면으로 부탁드립니다 피엠님. ERP 부분도 확인 한번 부탁드립니다. May 12, 2025 at 11:40 AM, András : 2. emelet Stop detect error May 12, 2025 at 11:41 AM, Döme György F.A : Megyek May 12, 2025 at 12:01 PM, 배병민 (Bae Byoungmin) : PM님 확인이 늦었습니다. 1라인 샘플 생산일자가 언제로 변경되었을까요? 변경 일정에 맞추어 1라인 준비 해놓겠습니다 May 12, 2025 at 12:05 PM, 송호석(Ho seok song) : 네 해리피엠이랑 얘기 나누었는데요, 샘플 금주 수요일부터 생산이며 자재는 내일부터 채울계획입니다. May 12, 2025 at 12:05 PM, 배병민 (Bae Byoungmin) : 넵 알겠습니다 감사합니다 May 12, 2025 at 1:05 PM, András : 2.emelet Slow Detect error ismét May 12, 2025 at 1:07 PM, Döme György F.A : Megyek May 12, 2025 at 3:13 PM, Krisztian Bozor invited Ági. May 12, 2025 at 3:21 PM, Krisztian Bozor : . May 12, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 +2 Overtime Overtime (2):Csanálosi Gábor, Denkó János Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 12, 2025 at 6:09 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 12 Time: 18:00~06:00 1. Jeong Woo-jun May 12, 2025 at 6:20 PM, VK (mcs) : @FA Please check M0STK034 MCP SMC#1 disconnected error! May 12, 2025 at 6:21 PM, N.Gábor F.A. : Checking May 12, 2025 at 6:26 PM, N.Gábor F.A. : Is it known that the 34 warehouses have been operating in recent days? May 12, 2025 at 6:29 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son #34 창고 금일 전체 출고 완료된 상태인가요? May 12, 2025 at 6:29 PM, VK (mcs) : I am not sure about it But as I see there is some errors in manual port and crane since a few hours. May 12, 2025 at 6:32 PM, 배병민 (Bae Byoungmin) : @N.Gábor F.A. Cell finished product warehouse #34 is still experiencing difficulties in operating due to a problem with the driving wheel. Please do not take any action as it is being managed by the CS team. May 12, 2025 at 6:33 PM, FACS_Hyeongi Son : 넵 오늘 마지막 완제품까지 출고 완료되었습니다 May 12, 2025 at 6:33 PM, N.Gábor F.A. : Okay, we don't do anything May 12, 2025 at 6:34 PM, 배병민 (Bae Byoungmin) : 네, 테크니션분들꺼 상황 인지할수있게 공유부탁드립니다. 비가동 상태로 유지 될수있도록... May 12, 2025 at 6:37 PM, 배병민 (Bae Byoungmin) : @FA team The Cell finished goods warehouse #34 will be out of operation until the drive wheel is replaced due to a problem. May 12, 2025 at 6:38 PM, FACS_Hyeongi Son : 넵 알겠습니다 May 12, 2025 at 10:00 PM, VK (mcs) : @FA Please check 2 F M0CNV023-35028 Wrapper wrap residual Det alarm. May 12, 2025 at 10:14 PM, KIM SEYEON [김세연]_FA : @Denkó Jani (F.A.) please check 2F May 12, 2025 at 10:14 PM, N.Gábor F.A. : Done May 12, 2025 at 10:14 PM, KIM SEYEON [김세연]_FA : 👍 May 12, 2025 at 10:15 PM, Denkó Jani (F.A.) : Solved 🫡 May 12, 2025 at 10:19 PM, KIM SEYEON [김세연]_FA : 👍 May 13, 2025 at 6:03 AM May 13, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt, sziasztok! A teherporta felőli parkolóban egy GLD-047-es rendszámú Suzuki Swift-en fent maradt a világítás. kérlek osszátok tovább más csoportba. May 13, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.13 FA Iváncsa "C" shift (06:00-18:00) 13 Tech, 1 SL Beteg(sick): 1, Sarvajz Ferenc Szabadság(Holisay): 2, Farkas Tamás(SL), Fabriczius Gergely Helyettesít(Substitution): 2, Böröcz Tamás, Pálosi Róbert, Szücs Géza Imre(SL) Túlóra(Overtime): 1, Édl Tamás --- Electrode (5) --- Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Pálosi Róbert --- Assembly 1F(3) --- Csuti Zoli Gégény Dávid Böröcz Tamás ---Assembly GF(3) --- Kertész Dániel Lajos Gábor Nagy Tamás --- May 13, 2025 at 7:19 AM, 윤성제(Yoon SungJe) : @FA Hello, the module GF AGV is not moving. JOB has been created. Can you check it? May 13, 2025 at 7:20 AM, Muneeb Ur Rehman : Checking May 13, 2025 at 7:23 AM, Muneeb Ur Rehman : Fixed May 13, 2025 at 8:03 AM, FACS_JaewonShin : ■ 13th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 13, 2025 at 8:42 AM, Duna Don invited FA/CS/AGV_ Asjad. May 13, 2025 at 9:33 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check MOSTK035 “1F HP1 light curtain detect error “ Thank you May 13, 2025 at 10:03 AM, FACS_Hyeongi Son : @MCS Plz move the UNKDBS-250501191352 M0STK027_0103002 to M0CNV022_M03 May 13, 2025 at 10:07 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for the given carrier. May 13, 2025 at 10:18 AM, FACS_Hyeongi Son : @MCS PF221-2504280005 Can you create a catch for this raw material? It is currently located at M0CNV022_M02 May 13, 2025 at 10:20 AM, FACS_Hyeongi Son : Material transfer completed May 13, 2025 at 11:12 AM, Muneeb Ur Rehman : @FA please check the port as the AGV 3 in line 1-2 raw material is waiting for it to May 13, 2025 at 11:15 AM, Sazzad Bhai SKon : Line2 in port M2MFA300_P05 is in manual mode since 1st May May 13, 2025 at 11:22 AM, Shahbaz 샤바즈 MCS/RTD : Is it the one in front of M2MFA300_P17 with PS210-2410310060? May 13, 2025 at 11:32 AM, András : Sziasztok 2.emeleten Stop detect error and alive Signal error May 13, 2025 at 11:51 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check MOSTK035 “1F HP1 light curtain detect error “ Thank you May 13, 2025 at 1:40 PM, 송호석(Ho seok song) : @연해리 3라인 생산 종료 후 J/C 진행 중으로 셀완제품 창고 가동계획 없습니다(4라인은 지속 생산 중, 셀 입고 필요) 문의주신 점검 관련 진행하시면 됩니다. May 13, 2025 at 1:50 PM, 연해리 : 네 4라인 셀 공급 상태 확인하면서 shortage 없도록 점검 진행하겠습니다 May 13, 2025 at 1:51 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check MOSTK035 “1F HP1 light curtain detect error “ Thank you May 13, 2025 at 1:52 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK031 M0STK031_C01 크레인 정지 상태인데 확인 부탁드립니다 May 13, 2025 at 1:52 PM, FACS_Hyeongi Son : 이동하겠습니더 May 13, 2025 at 1:55 PM, Döme György F.A : I will start the crane immediately.The smoke detectors were tested by an external company. May 13, 2025 at 1:58 PM, FACS_TaehyeongJin : 소방 점검으로 일시 정지 중이었습니다 현재 정상 가동중입니다 May 13, 2025 at 1:58 PM, Édl Tamás : Solved May 13, 2025 at 2:01 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 확인 감사합니다 May 13, 2025 at 2:04 PM, Döme György F.A : The test continues at crane 32. May 13, 2025 at 2:07 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.05.13 2.Machine name : -셀버퍼#1.2.3.4 3. Action detail : -물건 감지 센서 조정 작업 4.Work time -Start : 14:05 -End : 5. Remark(special note) : -X May 13, 2025 at 2:34 PM, Döme György F.A : The testing of crane 32 has been completed. May 13, 2025 at 2:42 PM, FACS_JaewonShin : Stk 13 finished Stk 12 on going May 13, 2025 at 2:53 PM, FACS_JaewonShin : Stk12, 13 finished Stk11 on going May 13, 2025 at 3:01 PM, 윤경환 : @ MCS/RTD Hello. Please move the PS22A-2505080400 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. May 13, 2025 at 3:01 PM, 윤성제(Yoon SungJe) : @FA @MCS Hello, the JOB for PS22A-2505080386 has disappeared. It is a RECALL material, but it has departed M3MFA300_P19 and needs to go into the warehouse. Can you help me? May 13, 2025 at 3:03 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created to M0CNV023_M03. May 13, 2025 at 3:03 PM, 윤성제(Yoon SungJe) : It is now in AGV1 between module 3 and 4 lines. May 13, 2025 at 3:04 PM, Shahbaz 샤바즈 MCS/RTD : The job is terminated because of source interlock error. May 13, 2025 at 3:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035 M0STK035_C01 크레인 정지 상태입니다. 제품 배풀이 되지 않고 있어서 빠른확인 부탁드립니다 May 13, 2025 at 3:05 PM, 윤경환 : Thank you. May 13, 2025 at 3:07 PM, FACS_TaehyeongJin : 이동중입니다 May 13, 2025 at 3:08 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command recreated to the previous destination. May 13, 2025 at 3:11 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command recreated to the previous destination. May 13, 2025 at 3:28 PM, FACS_TaehyeongJin : Solved May 13, 2025 at 3:38 PM, FACS_JaewonShin : Stk11,12,13 finished Stk14 on going May 13, 2025 at 3:59 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK023 Crane STK action 5 min time over error. May 13, 2025 at 4:03 PM, Édl Tamás : Solved May 13, 2025 at 4:04 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.13 2.Machine name : -셀버퍼#1.2.3.4 3. Action detail : -물건 감지 센서 조정 작업 4.Work time -Start : 14:05 -End : 15:59 5. Remark(special note) : -X May 13, 2025 at 4:15 PM, 연해리 : @송호석(Ho seok song) 셀버퍼 창고 점검 작업 완료되었습니다. 협조 감사드립니다. May 13, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (0):- Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 13, 2025 at 6:07 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) @MCS/RTD team bank : M0STK031 source : 0202104 carrier id : U013481 Dest EQP unit : M0CNV033_M03 @배병민(Bae Byoungmin) 해당 케리어 아이디가 RTD상에서 배출이 인되고 있습니다. 금일 사외창고 이관품이라 확인 부탁드립니다. @MCS/RTD team The product is not generating RTD commands. Can you manually move it to the M0CNV033_M03 port? May 13, 2025 at 6:07 PM, Mohammad Amir : Checking Sir. May 13, 2025 at 6:14 PM, Mohammad Amir : Sir, Unfortunately I didn't find any carrier with such Id in MCS and RTD database. Could you please tell me ,Carrier type and physical location of this carrier ,so that I will install this carrier and try again. Thank you very much! May 13, 2025 at 6:17 PM, SKOH2/제조-셀,모듈 출하/김병호 : I know. It can't be searched in MCS and RTD. It can only be searched on SCS(sim). The product must be discharged manually. Is it possible? May 13, 2025 at 6:19 PM, Mohammad Amir : Sir, Unfortunately As this carrier not available in our MCS RTD system that's why I can not discharge manually. However if you tell me pallet type and physical location I can install the carrier and try again using MCS . Thank you very much! May 13, 2025 at 6:29 PM, SKOH2/제조-셀,모듈 출하/김병호 : I'll contact the FACS team tomorrow to solve it. Thanks May 13, 2025 at 6:29 PM, Mohammad Amir : Okay Sir, Thank you very much! May 13, 2025 at 6:39 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS-team @배병민 (Bae Byoungmin) 해당 케리어 아이디가 상위 MCS/RTD상에서 검색이 되지않고 SCS상에서는 검색이 됩니다. 수동으로 배출이 필요하여, 해당제품 명일 오전에 이관예정이어서 명일 아침에 수동 배출 부탁드입니다 FACS 매니저님.. bank : M0STK031 source : 0202104 carrier id : U013481 Dest EQP unit : M0CNV033_M03 May 13, 2025 at 6:40 PM, FACS_Hyeongi Son : 넵 명일 오전 출근하는데로 바로 수동배출 해드리겠습니다 May 13, 2025 at 6:44 PM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 주임님 계속적으로 MCS/RTD 캐리어 아뒤가 조회안되는 현상이 한번씩 발생되고있는데 일전 제가 확인 했을때는 누군가 캐리어아뒤를 삭제한것으로 파악되었습니다. 혹시나 작업자분들께서 삭제 부분 있는지 확인 부탁드립니다. @김주연 PM님 해당 캐리어 "U013481" 조회가 MCS/RTD에서 왜 안되는지 한번만더 확인 부탁드립니다. May 13, 2025 at 6:51 PM, Mohammad Amir : Dear @배병민 (Bae Byoungmin) @SKOH2/제조-셀,모듈 출하/김병호 For your information, The carrier U013481 was located successfully at M0STK031(0202104) at 2025-05-08 at 2:29:20. Carrier removed report was received at 2025-05-08 at 9:18. Thank you very much! May 13, 2025 at 6:52 PM, SKOH2/제조-셀,모듈 출하/김병호 : pm님 당팀에서 사용중인 아이디는 삭제 권한자체가 없습니다. May 13, 2025 at 6:54 PM, SKOH2/제조-셀,모듈 출하/김병호 : Can you tell me who the account that executed the deletion is? May 13, 2025 at 6:55 PM, 김주연 : Can you check it at RTD - dms carrier hist table? Please check the last activity May 13, 2025 at 7:15 PM, Mohammad Amir : Dear Ma'am, The last activity is :- Modifier:- MCS Time:-2025-08-08 ,09-18. Load state-Full State -Removed Activity:-Carrier Data Removed Report. Carrier id:-U013481. Thank you! May 13, 2025 at 9:48 PM, Mohammad Amir : @FA @Dávid F.A. Please check M3MFA300_P20/21 are OOS that's why two jobs are Alternated. Thank you very much! May 13, 2025 at 9:50 PM, N.Gábor F.A. : The line 3 currently doesn't operate May 13, 2025 at 9:53 PM, Mohammad Amir : Thank you very much! May 13, 2025 at 9:53 PM, N.Gábor F.A. : Your welcome May 13, 2025 at 10:14 PM, Dávid F.A. : @Mohammad Amir I would like to ask for help! Would you like to deliver Paletta Local M0CNV032_P01 ID: Z302546 Delete old workflow! Verification has been done, Paletta is physically here! Thank you very much in advance! May 13, 2025 at 10:14 PM, Mohammad Amir : Checkking May 13, 2025 at 10:16 PM, Mohammad Amir : Issue has been resolved ✅. The carrier has started to move. I am monitoring for smooth delivery of materials. Thank you very much! May 13, 2025 at 10:17 PM, Dávid F.A. : Thank you for your help! Problem solved! The sticker was damaged! May 13, 2025 at 10:17 PM, Mohammad Amir : Now slowly all the AGVs which are in queue will start delivering the materials. ✅ Thank you very much! May 13, 2025 at 10:18 PM, Mohammad Amir : You are welcome! Feel free to reach out me again if you face any issue. May 14, 2025 at 2:37 AM May 14, 2025 at 2:37 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV023_P31/P32 there is Light Curtain Error. Thank you very much! May 14, 2025 at 2:37 AM, N.Gábor F.A. : Cleaning is currently underway, please be patient. May 14, 2025 at 2:38 AM, Mohammad Amir : Thank you very much for the update. May 14, 2025 at 2:38 AM, N.Gábor F.A. : Your welcome May 14, 2025 at 5:51 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.14 "B" műszak, 8+1/12+1 Tech, 1Sl Overtime(0): Holiday(3): Csanálosi Gábor, Takács Ádám, Kovács Ágnes Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Böröcz Tamás, Rácz Dániel --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- Support: 방혁_이반차 (Bang Hyuk) May 14, 2025 at 7:59 AM, FACS_Hyeongi Son : 안녕하세요 주임님 지금 수동 출고 중입니다 May 14, 2025 at 8:03 AM, FACS_Hyeongi Son : @SKOH2/제조-셀,모듈 출하/김병호 U013481 제품 M0CNV033_M03에 있습니다 확인 부탁드립니다~ May 14, 2025 at 8:08 AM, Tóth Gyula : Came out. Thank you. May 14, 2025 at 8:08 AM, FACS_Hyeongi Son : 👍🏻 May 14, 2025 at 8:17 AM, Sazzad Bhai SKon : This has been deleted by MCS system, (no manual action). We're analysing the reason May 14, 2025 at 8:31 AM, FACS_JaewonShin : ■ 14th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 14, 2025 at 8:41 AM, Sazzad Bhai SKon : U013481: this error happened due to wrong reconciliation report from #4 line module assembly P06. May 14, 2025 at 10:37 AM, Niki (Modul) : Sziasztok fiúk! @Boromisza Zoltán @Denkó Jani (F.A.) hátsó raktárba gond van May 14, 2025 at 10:39 AM, duzzaman Md (MCS) : @FA Please check M0STK026 Crane is OOS. Thank you May 14, 2025 at 10:49 AM, Denkó Jani (F.A.) : @FACS_Hyeongi Son Please check May 14, 2025 at 10:50 AM, FACS_Hyeongi Son : Where is it? Please write down the exact area name May 14, 2025 at 10:52 AM, FACS_Hyeongi Son : M0CNV? M0STK? F0BPM? May 14, 2025 at 10:53 AM, Niki (Modul) : As you go up the back door to the second floor, the boys know the warehouse on the right. May 14, 2025 at 10:54 AM, Denkó Jani (F.A.) : Maybe 2f endprodukt RTV May 14, 2025 at 10:55 AM, FACS_Hyeongi Son : Got it i’m going now May 14, 2025 at 10:56 AM, Niki (Modul) : CV016 May 14, 2025 at 11:09 AM, FACS_Hyeongi Son : Is anyone working on M0STK026? @Denkó Jani (F.A.) May 14, 2025 at 11:09 AM, FACS_Hyeongi Son : Solved May 14, 2025 at 11:10 AM, Denkó Jani (F.A.) : No May 14, 2025 at 11:13 AM, Niki (Modul) : @Boromisza Zoltán bazi nagy probléma van az egyik foliázógépnél! May 14, 2025 at 11:14 AM, Niki (Modul) : Az a korong amit letol az anyagra totál ferdén áll!!! May 14, 2025 at 11:19 AM, Boromisza Zoltán : Megyek May 14, 2025 at 11:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS-team @배병민(Bae Byoungmin) bank : M0STK037 1F M0STK037_P12 carrier id : U014384 제품이 알람발생없이 해당포트에 기동중지 상태입니다 확인 부탁드립니다 May 14, 2025 at 11:27 AM, 방혁 PM(Bang.Hyuk) FA : @FACS_JaewonShin 팀장님 확인 부탁드립니다 May 14, 2025 at 11:27 AM, FACS_Hyeongi Son : 이동하겠습니다 May 14, 2025 at 11:38 AM, FACS_TaehyeongJin : 조치완료했습니다 May 14, 2025 at 1:30 PM, Tóth Gyula : Sziasztok, Dunnagèt szeretnènk betölteni, de nem működik a raktár. MOCNV033_M02 May 14, 2025 at 1:33 PM, FACS_Hyeongi Son : Going May 14, 2025 at 1:33 PM, Boromisza Zoltán : Úton May 14, 2025 at 1:36 PM, Boromisza Zoltán : Kész May 14, 2025 at 3:23 PM, Niki (Modul) : 2. Emelet Lift error May 14, 2025 at 3:39 PM, 손병훈 : 모듈 4라인 어퍼 투입 갠트리 Idle-run 반복중입니다. alive가 계속 붙었다 떨어졌다합니다. 컨베이어 내부 수량 때문인거 같은데 제어쪽 확인부탁드립니다. May 14, 2025 at 3:56 PM, FACS_TaehyeongJin : 정상작동중입니다 May 14, 2025 at 4:25 PM, duzzaman Md (MCS) : @FA Please check M0STK032 , Crane is OOS. Crane unload timeout Thank you May 14, 2025 at 4:29 PM, Denkó Jani (F.A.) : Solved May 14, 2025 at 6:10 PM, Mohammad Amir : @FA Please check M0CNV031_RTV01 there is Port interface Error. It has blocked several jobs . Thank you very much! May 14, 2025 at 6:38 PM, Édl Tamás : Solved May 14, 2025 at 6:38 PM, Mohammad Amir : Thank you very much! May 14, 2025 at 7:27 PM, Alexandra : 2f cv031 stop detect error, product detect error May 14, 2025 at 7:50 PM, Magosi Erik : @Csepi Árpád kitudnátok jönni az 1es sor alapanyag lifthez? Product Detect error és stop detect error van May 14, 2025 at 7:50 PM, Magosi Erik : Köszi May 14, 2025 at 8:21 PM, 승규 (BAEK SEUNGGYU) : @FA I need help with M1MFA300 M0CNV023 LF01. The job disappeared during the material recovery. May 14, 2025 at 8:23 PM, Mohammad Amir : @FA @Édl Tamás Please check M0STK032_C01 there is Crane Unload Timeout error. Thank you very much! May 14, 2025 at 8:25 PM, Mohammad Amir : This message was deleted. May 14, 2025 at 8:27 PM, Mohammad Amir : Sir, Could you please share me carrier id so that I can examine what is the reason behind this phenomena. And try to solve the issue . Thank you very much! May 14, 2025 at 8:31 PM, Mohammad Amir : @Édl Tamás This error still exists and because of this Job for Module line -4 is getting delayed. Thank you very much! May 14, 2025 at 8:33 PM, 승규 (BAEK SEUNGGYU) : PS290-2412020020 empty pallet. May 14, 2025 at 8:34 PM, Mohammad Amir : Checking Sir. May 14, 2025 at 8:34 PM, Csepi Árpád : @Mohammad Amir Hi! I need assistance with a transport task waiting at M0CNV023-LF C/V 013 port. ID: PS290-2412020020. May 14, 2025 at 8:35 PM, Mohammad Amir : Checking May 14, 2025 at 8:36 PM, Csepi Árpád : P22 port May 14, 2025 at 8:38 PM, Csepi Árpád : “Thank you very much!” May 14, 2025 at 8:38 PM, Mohammad Amir : Sir, Issue has been resolved ✅. Carrier on its way to Warehouse STK28. I am monitoring the transfer for smooth delivery. Thank you very much! May 14, 2025 at 8:39 PM, Mohammad Amir : @Csepi Árpád For you information. Thank you very much! May 14, 2025 at 8:39 PM, Mohammad Amir : You are welcome! May 14, 2025 at 8:45 PM, Sánta László : @Mohammad Amir Empty dunnages do not arrive at Modul line4. Please check it! May 14, 2025 at 8:45 PM, Mohammad Amir : Checking May 14, 2025 at 8:46 PM, Édl Tamás : Solved May 14, 2025 at 8:46 PM, Csepi Árpád : This message was deleted. May 14, 2025 at 8:46 PM, Csepi Árpád : Szia! Eddig hibába állt a 032 daru! May 14, 2025 at 8:47 PM, Mohammad Amir : Issue has been resolved with STK032 and now empty dunnage on the way. ✅ You witnessed delay because of STK032 error. I am monitoring. Thank you very much! May 14, 2025 at 8:47 PM, Mohammad Amir : @Sánta László May 14, 2025 at 8:48 PM, Mohammad Amir : Thank you very much! May 14, 2025 at 8:53 PM, Mohammad Amir : Empty dunnage has arrived successfully for line -4. ✅ Thank you very much! May 14, 2025 at 9:04 PM, SKOH2/제조-셀,모듈 출하/김병호 : @RTD/MCS team M0CNV033_M02 carrier id : U013614 CCS created a receiving command, but the destination information is not marked, and the product is not moving. Please check May 14, 2025 at 9:05 PM, Mohammad Amir : Checking Sir. May 14, 2025 at 9:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : This is Full plt. Can you put it anywhere between 31~33bank?? May 14, 2025 at 9:08 PM, Mohammad Amir : I am checking Sir. May 14, 2025 at 9:11 PM, Mohammad Amir : Sir, Could you please confirm me carrier id again. Are you sure,Is it U013614? Thank you very much! May 14, 2025 at 9:12 PM, SKOH2/제조-셀,모듈 출하/김병호 : Sorry U013631 May 14, 2025 at 9:12 PM, Mohammad Amir : Thank you very much Sir . I am checking. May 14, 2025 at 9:13 PM, Sánta László : Thank you! 🤝🏼 May 14, 2025 at 9:13 PM, Mohammad Amir : You are welcome! May 14, 2025 at 9:14 PM, SKOH2/제조-셀,모듈 출하/김병호 : It's moving, thank you May 14, 2025 at 9:15 PM, Mohammad Amir : I have resolved the issue sir ✅. Carrier has started to move . I am monitoring for smooth delivery. Thank you very much! May 14, 2025 at 9:20 PM, Mohammad Amir : Carrier U013631 has successfully stored in STK031 (0201003) at 21:19. ✅ Thank you very much! May 14, 2025 at 9:21 PM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you for your quick confirmation. May 14, 2025 at 9:21 PM, Mohammad Amir : You are welcome Sir. Feel free to contact me again if you need any further assistance. May 14, 2025 at 11:43 PM, Mohammad Amir : @Édl Tamás Please check M3MFA300_P01 ,it is OOS that's why one job is pending. Thank you very much! May 14, 2025 at 11:52 PM, Édl Tamás : Sir, production is complete. May 14, 2025 at 11:55 PM, Mohammad Amir : In this case should I cancel the job? Thank you very much! May 14, 2025 at 11:57 PM, Édl Tamás : Yes, thank you! May 14, 2025 at 11:58 PM, Mohammad Amir : Job has been cancelled successfully. ✅ In future when production will start simply press LR and job will be created. Thank you very much! May 15, 2025 at 5:30 AM May 15, 2025 at 5:30 AM, Csepi Árpád : The M0STK-014 warehouse shelf 0100906 has been locked due to a detection error! The crane is operating in automatic mode! May 15, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.15 "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(4): Csanálosi Gábor, Takács Ádám, Kovács Ágnes , 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(0): May 15, 2025 at 6:29 AM, Niki (Modul) : Jó reggelt fiúk! @Boromisza Zoltán @Gerbovits Kevin lift error! Paletta elvan törve valószínű lehet azért nem veszi le! May 15, 2025 at 6:38 AM, Gerbovits Kevin : Úton May 15, 2025 at 6:53 AM, Boromisza Zoltán : Kész May 15, 2025 at 7:31 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! May 15, 2025 at 7:36 AM, Boromisza Zoltán : Úton May 15, 2025 at 7:45 AM, Boromisza Zoltán : Kész May 15, 2025 at 8:07 AM, Kurkó Péter : Helló modul 3line endplate gantryre valaki nézzen rá köszi May 15, 2025 at 8:09 AM, FACS_JaewonShin : ■ 15th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 15, 2025 at 8:10 AM, 윤성제(Yoon SungJe) : @FA Ungrip is not working, please check. May 15, 2025 at 8:12 AM, Boromisza Zoltán : Going May 15, 2025 at 8:30 AM, Boromisza Zoltán : Solved May 15, 2025 at 9:28 AM, Tóth Gyula : Sziasztok, MOCNV036 M_02 Nem jönnek ki a kikért cellák. May 15, 2025 at 9:29 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK035_C01 “MCP 1F HP1 light curtain detect error “ Thank you May 15, 2025 at 9:33 AM, Boromisza Zoltán : Going May 15, 2025 at 9:33 AM, Boromisza Zoltán : Going May 15, 2025 at 9:37 AM, Boromisza Zoltán : Solved May 15, 2025 at 9:48 AM, KIM SEYEON [김세연]_FA : Do you know why it happens often? May 15, 2025 at 9:51 AM, 배병민 (Bae Byoungmin) : 비둘기입니다. May 15, 2025 at 9:52 AM, Boromisza Zoltán : I don't know, but there are more birds inside, maybe they fly in. May 15, 2025 at 9:53 AM, KIM SEYEON [김세연]_FA : ok May 15, 2025 at 9:53 AM, KIM SEYEON [김세연]_FA : will buy more bird traps May 15, 2025 at 10:17 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK031 - 1F M0CNV033_P02_BP01 해당 구역 알람발생으로 기동 중지상태입니다, 제품 배출이 되지 않고 있어 확인 부탁드립니다 May 15, 2025 at 10:18 AM, FACS_Hyeongi Son : 이동하겠습니다 May 15, 2025 at 10:25 AM, FACS_Hyeongi Son : 조치완료하였습니다 May 15, 2025 at 10:40 AM, Shahbaz 샤바즈 MCS/RTD : @FA M0STK035_C01 there is again“MCP 1F HP1 light curtain detect error “ Please check Thank you May 15, 2025 at 10:40 AM, Tóth Gyula : Sziasztok, MOCNV036 M_02 Nem jönnek ki a kikért cellák. May 15, 2025 at 10:40 AM, FACS_Hyeongi Son : Solved May 15, 2025 at 10:40 AM, FACS_Hyeongi Son : Going May 15, 2025 at 10:43 AM, FACS_Hyeongi Son : It works normally and well May 15, 2025 at 1:09 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cell buffer M0STK021 Crane fork right collapse detect 1 Thank you May 15, 2025 at 1:19 PM, Gerbovits Kevin : Solved May 15, 2025 at 2:26 PM, Sazzad Bhai SKon : @FA Please confirm if pallet U022842 is in this location: M0STK032 (0102306) May 15, 2025 at 2:27 PM, Gerbovits Kevin : Going May 15, 2025 at 3:34 PM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin line 3 alsó burkolat Gantryhez kérnék egy kis segítséget May 15, 2025 at 3:35 PM, Sazzad Bhai SKon : Please confirm if you found the pallet on that shelf May 15, 2025 at 3:38 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cell buffer M0STK028 Crane fork right collapse detect 1 Thank you May 15, 2025 at 3:38 PM, Boromisza Zoltán : Kész May 15, 2025 at 3:47 PM, Boromisza Zoltán : Solved May 15, 2025 at 5:02 PM, Horváth Adriàn : Line 3 2es AGV work data problem. Check please May 15, 2025 at 5:02 PM, Muneeb Ur Rehman : Checking May 15, 2025 at 5:05 PM, Muneeb Ur Rehman : Fixed May 15, 2025 at 5:24 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FA team Please check if the AGV is stopped in front of the module automation warehouse. GF May 15, 2025 at 5:59 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. May 15, 2025 at 6:00 PM, 승규 (BAEK SEUNGGYU) : @MCS M3MFA300_P27 AGV3 FP221-2504290001 Can you cancel the job of the AGV? This pallet is an empty pallet. May 15, 2025 at 6:02 PM, VK (mcs) : Checking May 15, 2025 at 6:02 PM, Alexandra : 2f cv037 stop detect error May 15, 2025 at 6:05 PM, VK (mcs) : Cancellation from MCS will not work. It should first cancel from ACS then I will delete it. @FA Please cancel current job for AGV #3 In 3rd line module assembly . Thx May 15, 2025 at 6:07 PM, FA CS AGV Jawad : @ACS May 15, 2025 at 6:13 PM, VK (mcs) : @FA Please check 2F M0CNV023 unit(35037) Stop detect error. May 15, 2025 at 6:13 PM, 승규 (BAEK SEUNGGYU) : @ACS M3MFA300_P27 AGV3 FP221-2504290001 Can you cancel the job? May 15, 2025 at 6:19 PM, VK (mcs) : I contacted with ACS member in charge and job has been cancelled. Thx May 15, 2025 at 6:37 PM, Édl Tamás : Solved May 15, 2025 at 7:31 PM, SKOH2/제조-셀,모듈 출하/김병호 : @RTD/MCS team M0CNV033_M01 carrier id : U022074 M0CNV033_M02 carrier id : U022185 CCS created a receiving command, but the destination information is not marked, and the product is not moving. Please check This is Full plt. Can you put it anywhere between 31~33bank?? May 15, 2025 at 7:31 PM, Maczó Anikó : Sziasztok 2.-dik emeleten 84001 May 15, 2025 at 7:43 PM, SKOH2/제조-셀,모듈 출하/김병호 : Should I wait for a long time?? May 15, 2025 at 7:44 PM, VK (mcs) : Please wait I am checking May 15, 2025 at 7:45 PM, SKOH2/제조-셀,모듈 출하/김병호 : Okay. Thanks May 15, 2025 at 7:51 PM, SKOH2/제조-셀,모듈 출하/김병호 : It's moving, thank you May 15, 2025 at 7:52 PM, VK (mcs) : Jobs created to STK 32. Currently rate capacity for 31 and 33 is 98% and it's not possible to transfer there. Thx May 15, 2025 at 7:56 PM, VK (mcs) : @FA Please check 1F M0CNV035 RTV car fiber communication error. MC01, MC02 on trolley AC power. May 15, 2025 at 7:58 PM, Édl Tamás : Kész May 15, 2025 at 8:10 PM, Maczó Anikó : Köszönöm May 15, 2025 at 8:11 PM, Brázik János : Solved May 15, 2025 at 8:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : RTD usage account : outbound I entered the wrong password and locked it. I need to reset, please help me May 15, 2025 at 8:32 PM, VK (mcs) : Password changed to 1234. Please log in and change it. Thx May 15, 2025 at 8:51 PM, SKOH2/제조-셀,모듈 출하/김병호 : thank you^^\ May 15, 2025 at 9:39 PM, Maczó Anikó : Sziasztok 2.-dik emeleten Cv021 stop detect error Rtv carcv ccw run time delay Köszönöm May 15, 2025 at 9:49 PM, VK (mcs) : @FA Please check 2F M0CN023 RTV 04 RTV at cv CCW run time delay. M0CN023-B03(82021) Stop detect error. May 15, 2025 at 10:02 PM, Édl Tamás : Solved May 15, 2025 at 10:18 PM, VK (mcs) : @FA Please check 2F M0STK 025 MCP 2F OP2 light curtain detect error. May 15, 2025 at 10:57 PM, Édl Tamás : Solved May 16, 2025 at 12:02 AM May 16, 2025 at 12:02 AM, FA CS AGV Jawad : This message was deleted. May 16, 2025 at 12:03 AM, FA CS AGV Jawad : This message was deleted. May 16, 2025 at 12:48 AM, FA CS AGV Jawad : @Édl Tamás can you plz come to end product, box packing, I need the key for Tool trolley May 16, 2025 at 3:31 AM, VK (mcs) : @FA Please check 2nd cell buffer M0STK012 R110748 shelf (0101604) It's not transferring. destination is boxpacking. May 16, 2025 at 4:19 AM, Brázik János : Solved May 16, 2025 at 6:26 AM, Farkas Tamàs : Jó napot! FA Iváncsa "C" shift (6:00-18:00) 11+1 Tech, 1 SL Beteg: 1 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (3) Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Kertész Dani Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasztia Zoli Boromissza Zoltán May 16, 2025 at 7:21 AM, András : Sziasztok 2. emeleten CV029 Product Detect error May 16, 2025 at 7:22 AM, Döme György F.A : Megyünk May 16, 2025 at 7:22 AM, duzzaman Md (MCS) : Unit name: M0CNV023_35_029 May 16, 2025 at 7:23 AM, András : Yes May 16, 2025 at 7:54 AM, FA/CS/AGV/Taimur : This message was deleted. May 16, 2025 at 7:58 AM, Zoltán Harasztia FA : @duzzaman Md (MCS) Hi, could you help us? We need to check from which port (M4MFA300 P31 or P30) and to where, including the pallet ID, the last pallet was returned to the warehouse. May 16, 2025 at 8:05 AM, duzzaman Md (MCS) : P31 PS222-2504240011 to M0STK027 on 2025-05-16 06:53 P30 PS290-2406280037 to MOSTK026 on 2025-05-16 06:47 May 16, 2025 at 8:07 AM, duzzaman Md (MCS) : Now, PS222-2504240012 is located at the P30 May 16, 2025 at 8:21 AM, Zoltán Harasztia FA : Hi, we would like to request pallet PS222-2504240011 to be sent to M0CNV023_35_38, because it previously lost the material boxes and returned to the warehouse empty. Once it arrives, we will put the boxes back on it and wrap it with film. After that, I will let you know, and we would like to send it back to the warehouse. May 16, 2025 at 8:26 AM, duzzaman Md (MCS) : Unfortunately, we don't have the authority to send it to the port you mentioned. If it was a manual port, we could have transferred it. May 16, 2025 at 8:28 AM, Zoltán Harasztia FA : Then please send it back to port M4MFA300 P30. May 16, 2025 at 8:32 AM, Zoltán Harasztia FA : @duzzaman Md (MCS) May 16, 2025 at 8:32 AM, duzzaman Md (MCS) : Please be acknowledged that, we don't have the authority to send materials to process machines or buffer ports or any auto ports. If its extremely important, please send it from your side manually. Thank you and apologies. May 16, 2025 at 8:33 AM, duzzaman Md (MCS) : Additionally, this port is OOS. May 16, 2025 at 8:37 AM, Zoltán Harasztia FA : We don’t have any authorization either. We’ll find another solution then, thank you. May 16, 2025 at 8:47 AM, 윤성제(Yoon SungJe) : Hello, and are you saying that I need to check if this pallet contains materials? May 16, 2025 at 8:52 AM, FACS_JaewonShin : ■ 16th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 16, 2025 at 8:57 AM, Zoltán Harasztia FA : 방금 창고 담당자들과 확인했습니다. 당신은 아무것도 하지 않으셔도 됩니다. May 16, 2025 at 9:30 AM, Beatrix : Hello. We have problem. We can not load marerials to the Automatic Warehouse. Conveyors are not moving. But there is no error message. Can you help us? M0CNV021 and M0CNV022 May 16, 2025 at 9:33 AM, Sazzad Bhai SKon : Which port? Because I see from M0CNV021_M01 the job was created successful May 16, 2025 at 9:39 AM, FA/CS/AGV/Taimur : @MCS Can you please restore the transfer job for agv: 08. Its standing idle with no job assigned. Thank you May 16, 2025 at 9:40 AM, Sazzad Bhai SKon : This message was deleted. May 16, 2025 at 9:40 AM, Sazzad Bhai SKon : Checking May 16, 2025 at 9:41 AM, FA/CS/AGV/Taimur : GF_END_Product May 16, 2025 at 9:42 AM, Sazzad Bhai SKon : I see there is already a manual job on it. Destination is M0STK011, which is wrong. Please delete the job from ACS May 16, 2025 at 9:44 AM, FA/CS/AGV/Taimur : The job for AGV: 08 doesnt exist in ACS anymore. May 16, 2025 at 9:46 AM, 김주연 : agv위에 잇는화물에 수동잡을 생성햇는데요, 이런 행위는 위험합니다. 반송생성하신 사유가 있을까요? @KIM SEYEON [김세연]_FA 피엠님 참고부탁드립니다. May 16, 2025 at 9:46 AM, Sazzad Bhai SKon : We'll delete the existing job and send it to original destination M0STK035 May 16, 2025 at 9:48 AM, KIM SEYEON [김세연]_FA : 수동잡을 누가 생성한건가요? ID 확인 가능할까요? May 16, 2025 at 9:48 AM, duzzaman Md (MCS) : Its moving. Transfer initiated May 16, 2025 at 9:51 AM, FA/CS/AGV/Taimur : I checked the Pallet ID also and it is correct. R110749 transferred to M0CNV032_P01 port. Thank you May 16, 2025 at 10:42 AM, Beatrix : Hello. M0CNV021 stacker crane problem. This is in red but no error message and not moving. Can you help me? May 16, 2025 at 10:45 AM, Döme György F.A : Már is nézem May 16, 2025 at 10:59 AM, Döme György F.A : Megoldva May 16, 2025 at 11:00 AM, Beatrix : Köszönöm May 16, 2025 at 11:47 AM, Beatrix : Hello! M0CNV021_CV031 product detect error and CV_029 DIV redirect CV Stop error. Can you help us? May 16, 2025 at 11:48 AM, Döme György F.A : Megyek May 16, 2025 at 11:56 AM, Döme György F.A : Megoldva May 16, 2025 at 11:59 AM, Beatrix : Köszönöm May 16, 2025 at 12:55 PM, András : 2.emeleten CV021 stop detect error and alive Signal error May 16, 2025 at 12:56 PM, Zoltán Harasztia FA : Megyünk May 16, 2025 at 1:01 PM, Zoltán Harasztia FA : Kész May 16, 2025 at 1:12 PM, András : Köszi 👌 May 16, 2025 at 1:59 PM, 송호석(Ho seok song) : @KIM SEYEON [김세연]_FA 피엠님, 7라인 일정이 하기와 같이 예정되어 있는데요, 일전에 메일은 드렸지만 차주부터 자동화 대응이 필요합니다. 7라인 가동 가능 여부 확인 부탁드려요. -CW21(5/18~24) PFO교체 및 연습10모듈 -CW22 연습 및 설비 점검 50~80모듈 -CW23 R@R 2P12S 300모듈 -CW24 SOP 일정 단축 가능성도 있습니다. May 16, 2025 at 2:04 PM, KIM SEYEON [김세연]_FA : 5월18일 일요일부터 시작이 맞을까요? May 16, 2025 at 2:05 PM, 송호석(Ho seok song) : 18일은 아니고, 빠르면 19일, 늦어도 20일 연습생산 시작 예정 입니다 피엠님. May 16, 2025 at 2:14 PM, András : 2.emeleten CV021 stop detect error and alive RTV Car error May 16, 2025 at 4:06 PM, 유주환(Yoo Joohwan) : @Glócz István Please help me. May 16, 2025 at 4:07 PM, KIM SEYEON [김세연]_FA : @송호석(Ho seok song) 님 7라인 연습생산 준비를 하고싶은데, 혹시 7라인쪽 원자재 쪽 포트와 동선 정리해주실수 있을까요? May 16, 2025 at 4:11 PM, 송호석(Ho seok song) : 네 알겠습니다 May 16, 2025 at 4:11 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 16, 2025 at 5:58 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 16, 2025 at 5:59 PM, Mohammad Amir : @N.Gábor F.A. Please check M0STK035_C01 there is MCP GF OP2 Light Curtain Detect Error. One job is pending because of this error. Thank you very much! May 16, 2025 at 6:08 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 16 Time: 18:00~06:00 1. Jeong Woo-jun May 16, 2025 at 6:11 PM, Mohammad Amir : @FA @Dávid F.A. Please check this issue still exists. Thank you very much! May 16, 2025 at 6:11 PM, N.Gábor F.A. : Omw May 16, 2025 at 6:12 PM, Mohammad Amir : Thank you very much! May 16, 2025 at 6:34 PM, Mohammad Amir : Are you still checking M0STK035? It is still under error. Thank you very much! May 16, 2025 at 6:35 PM, N.Gábor F.A. : Yes I'm working on it May 16, 2025 at 6:35 PM, Mohammad Amir : Okay thank you very much! May 16, 2025 at 6:38 PM, N.Gábor F.A. : Done Operating May 16, 2025 at 7:44 PM, Mohammad Amir : @N.Gábor F.A. Please check M0CNV023_34_036 there is Stop detect error ,it is blocking materials delivery. Thank you very much! May 17, 2025 at 2:19 AM May 17, 2025 at 2:19 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK026_C01 there is Crane fork left collapse detect 4 error. Thank you very much! May 17, 2025 at 2:20 AM, N.Gábor F.A. : I'm going May 17, 2025 at 2:27 AM, N.Gábor F.A. : Done May 17, 2025 at 2:27 AM, Mohammad Amir : Thank you very much! May 17, 2025 at 6:11 AM, Farkas Tamàs : Jó napot! FA Iváncsa "C" shift (6:00-18:00) 12+1 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Kertész Dani Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(2) Döme György Harasztia Zoli May 17, 2025 at 9:56 AM, 유주환(Yoo Joohwan) : 금일 정리 완료 됐습니다 May 17, 2025 at 11:07 AM, Ági : Sziasztok 2.emelet CV003 work data error CV003 stop detect error May 17, 2025 at 11:08 AM, Döme György F.A : Megyek May 17, 2025 at 11:11 AM, duzzaman Md (MCS) : @FA PLEASE CHECK M0CNV023_82_003 THERE IS WORK DATA ERROR THANK YOU May 17, 2025 at 11:12 AM, Döme György F.A : On my way May 17, 2025 at 11:13 AM, duzzaman Md (MCS) : Thank you. Also kindly check STK 028 CRANE C01 Crane fork right collapse detect 3 May 17, 2025 at 11:14 AM, Döme György F.A : Checking May 17, 2025 at 11:24 AM, Döme György F.A : Solved May 17, 2025 at 5:13 PM, András : Sziasztok 2.emelet CV003 work data error May 17, 2025 at 5:13 PM, Döme György F.A : Megyek May 17, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs, Novák Károly Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 17, 2025 at 6:05 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 17, 2025 at 8:13 PM, N.Gábor F.A. : @MCS Hello Can you delete a job and create a new for this palette? Z302753 Curent location is M0CNV032_P01 May 17, 2025 at 8:20 PM, Shakir (MCS) : Currently RTV is oos please check May 17, 2025 at 8:21 PM, N.Gábor F.A. : Now ready May 17, 2025 at 8:22 PM, Shakir (MCS) : Again there is stop detect error May 17, 2025 at 8:27 PM, N.Gábor F.A. : Don't need a new job The currently its started May 18, 2025 at 6:13 AM May 18, 2025 at 6:13 AM, Farkas Tamàs : Jó napot! FA Iváncsa "C" shift (6:00-18:00) 12+1 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Kertész Dani Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Csuti Zoli Lajos Gábor Nagy Tamás ———————————— Formation/Modul(2) Döme György Harasztia Zoli May 18, 2025 at 8:01 AM, FACS_JaewonShin : ■ 18th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 1 people - Team leader 1 Shin jaewon May 18, 2025 at 12:29 PM, András : Sziasztok 2.emeleten Stop detect error May 18, 2025 at 12:32 PM, Zoltán Harasztia FA : Úton May 18, 2025 at 1:12 PM, Ági : Sziasztok 2.emelet CV041 conveyor run time over error Stop detect error May 18, 2025 at 1:13 PM, Döme György F.A : Megyek May 18, 2025 at 1:31 PM, Döme György F.A : Kész May 18, 2025 at 2:31 PM, duzzaman Md (MCS) : @FA Please check M0STK028_C01 there is Crane fork left collapse detect 1 error. Thank you very much! May 18, 2025 at 2:40 PM, Zoltán Harasztia FA : Kész May 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13+1 Overtime Overtime (1): Denkó János Sick (2):Kiss Balázs, Magyar Balázs Holiday (0):- Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Novák Károly Modul(3): Martina Dávid, Nagy Gábor, Denkó János May 18, 2025 at 6:03 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 18, 2025 at 6:31 PM, FA CS AGV Jawad : @Dávid F.A. can you plx check STK11, there is data mismatach error May 18, 2025 at 6:39 PM, N.Gábor F.A. : Done May 18, 2025 at 6:39 PM, FA CS AGV Jawad : Thank youzz May 18, 2025 at 7:39 PM, Denkó Jani (F.A.) : This message was deleted. May 19, 2025 at 6:21 AM May 19, 2025 at 6:21 AM, Sánta László : Hello! The control panel of the built-in component lift conveyor (M0CNV023-LF#2-OP#1), located on the ground floor of the module, is in error. Please check it! May 19, 2025 at 6:24 AM, Farkas Tamàs : Jó napot! FA Iváncsa "A" shift (6:00-18:00) 9+2 Tech, 1 SL Beteg: 1 Szabadságon: 1 Helyettesítés: 2 Túlórás: 0 ———————————— Electrode (3) Benczik Ádám Gutenkunst Ábel Viczai Tamás ———————————— Assembly 1F(2) Nagy Tibor Vékony Ferenc ———————————— Assembly GF(3) Csuti Zoli Magyar Imre Sopronyi Gábor ———————————— Formation/Modul(3) Brázik János Csepi Árpád Édl Tamás May 19, 2025 at 6:33 AM, Maczó Anikó : Sziasztok 2.-dik emeleten Cv034 stop detect error Cv030 chain cv run time over error Köszönöm May 19, 2025 at 6:40 AM, Mohammad Amir : @Csepi Árpád Please check M0STK027_C01 there is Crane fork left collapse detect 3 error and because of this several jobs are Alternated. Thank you very much! May 19, 2025 at 6:42 AM, Édl Tamás : Kész May 19, 2025 at 6:43 AM, Mohammad Amir : @Brázik János Please check M1MFA300_P34 it is OOS and it is causing delays in transfer. Thank you very much! May 19, 2025 at 6:55 AM, Csepi Árpád : This message was deleted. May 19, 2025 at 6:55 AM, Csepi Árpád : Solved May 19, 2025 at 6:56 AM, Sánta László : Köszönöm szépen! May 19, 2025 at 6:57 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0CNV031_RTV01 there is Interface Error and because of this one job is getting delayed. Thank you very much! May 19, 2025 at 7:02 AM, Csepi Árpád : Solved May 19, 2025 at 7:02 AM, Mohammad Amir : Thank you very much! May 19, 2025 at 7:06 AM, Sánta László : Morning! Empty Dunnage is not arriving at Module 4. Please check! May 19, 2025 at 7:06 AM, Sánta László : Thank you May 19, 2025 at 7:08 AM, Mohammad Amir : Checking May 19, 2025 at 7:09 AM, Mohammad Amir : This message was deleted. May 19, 2025 at 7:10 AM, Csepi Árpád : Solved May 19, 2025 at 7:11 AM, Mohammad Amir : Issue has been resolved ✅ Empty dunnage on the way to Module -4. I am monitoring. Thank you very much! May 19, 2025 at 7:11 AM, Mohammad Amir : Thank you very much! May 19, 2025 at 7:14 AM, Sánta László : Thank you May 19, 2025 at 7:14 AM, Mohammad Amir : You are welcome! May 19, 2025 at 7:33 AM, Mohammad Amir : @Brázik János @FA Please check this issue,it still exists and because of this one job is Alternated for quite a long time. Thank you very much! May 19, 2025 at 7:34 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK035_C01 there is Crane Rack position not detect error. Thank you very much! May 19, 2025 at 7:44 AM, Brázik János : Solved May 19, 2025 at 7:44 AM, Mohammad Amir : This message was deleted. May 19, 2025 at 7:44 AM, Mohammad Amir : Thank you very much 🙏 May 19, 2025 at 7:58 AM, Csepi Árpád : @Mohammad Amir Hi! I would like to request the work to be deleted from the gate! M1MFA300 P34 Thank you very much! May 19, 2025 at 8:01 AM, Mohammad Amir : Job has been cancelled successfully as requested ✅. Thank you very much! May 19, 2025 at 8:03 AM, FACS_JaewonShin : ■ 19th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 19, 2025 at 8:55 AM, Sazzad Bhai SKon : @FA M0STK034 is 100% full and currently stopped now. It's alternate storage machine M0STK035 is also 90% full now. So, please manage the material accordingly. May 19, 2025 at 9:04 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK027_C01 there is MCP 014,0MC03,04 On inverter power error ,several jobs are pending. Thank you very much! May 19, 2025 at 9:05 AM, Mohammad Amir : @Brázik János Please check M0STK035_P13 there is DIV Pallet Detect Error and because of this two jobs are Alternated. Thank you very much! May 19, 2025 at 9:14 AM, Mohammad Amir : @FA Please check these error still exists. Thank you very much! May 19, 2025 at 9:15 AM, FACS_Hyeongi Son : Going May 19, 2025 at 9:15 AM, Mohammad Amir : Thank you very much! May 19, 2025 at 9:28 AM, FACS_Hyeongi Son : M0STK035 M0STK027 Solved May 19, 2025 at 9:29 AM, Mohammad Amir : Thank you very much. May 19, 2025 at 9:29 AM, Mohammad Amir : @FACS_Hyeongi Son May 19, 2025 at 9:43 AM, Mohammad Amir : Could you please check M0STK035_C01 there is Light curtain detect error now. Thank you very much! May 19, 2025 at 9:43 AM, FACS_Hyeongi Son : Solved May 19, 2025 at 9:43 AM, Mohammad Amir : Thank you very much 🙏 May 19, 2025 at 9:44 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV023_36_035 wrapper heater temp alarm. Thank you very much! May 19, 2025 at 9:45 AM, Mohammad Amir : wrapper heater Cover Check alarm** May 19, 2025 at 10:43 AM, FACS_Hyeongi Son : @MCS M0CNV036_RTV Can you make a catch for Z302700? May 19, 2025 at 10:50 AM, Mohammad Amir : You are welcome,Sir. May 19, 2025 at 10:53 AM, Mohammad Amir : Sir, Carrier Z302700 has been successfully delivered to the requested port at 10:52 ✅ Feel free to contact me again if you need any further assistance. Thank you very much! May 19, 2025 at 10:54 AM, FACS_Hyeongi Son : Jó Köszönöm May 19, 2025 at 10:54 AM, Mohammad Amir : Szivesen! May 19, 2025 at 10:57 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV023_36_035 wrapper heater temp alarm. Thank you very much! May 19, 2025 at 11:13 AM, Csepi Árpád : Solved May 19, 2025 at 11:14 AM, Mohammad Amir : Köszönom szepen Nagyon! May 19, 2025 at 11:14 AM, Csepi Árpád : Szívesen! May 19, 2025 at 12:55 PM, Mohammad Amir : @Csepi Árpád Please check M0STK035_C01 there is Light curtain detect error. Two jobs are pending. Thank you very much! May 19, 2025 at 1:01 PM, Csepi Árpád : Solved May 19, 2025 at 1:01 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 2:07 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK024_C01 there is Crane fork left collapse detect 2 error and it has blocked the transfer for one pallet. Thank you very much! May 19, 2025 at 2:16 PM, Csepi Árpád : Solved May 19, 2025 at 2:16 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 3:06 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK032_C01 there is Crane Rack position not detect error. Thank you very much! May 19, 2025 at 3:08 PM, FACS_Youngmin LEE : Az 1F cella pufferhez targonca támogatás szükséges. Van valaki, aki tudna nekem segíteni? May 19, 2025 at 3:11 PM, Csepi Árpád : Solved May 19, 2025 at 3:11 PM, Mohammad Amir : Köszönom szepen! May 19, 2025 at 3:11 PM, Csepi Árpád : Szívesen🙂 May 19, 2025 at 3:13 PM, Sánta László : @Csepi Árpád I need help at the end of line 4. The empty dunnage would have entered the line from AGV, but it got stuck. Thank you May 19, 2025 at 3:17 PM, Sánta László : Sorry, not empty. Out cv, so its full. May 19, 2025 at 3:34 PM, FA-CS-AGV-Masoud : Its already solved sir thanks for information 🙏 May 19, 2025 at 4:16 PM, Sánta László : Thank you very much too. May 19, 2025 at 5:26 PM, FA-CS-AGV-Masoud : @Csepi Árpád please check M0STK012_P10 PIO interface error May 19, 2025 at 5:32 PM, Csepi Árpád : Solved May 19, 2025 at 5:54 PM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.19 "B" műszak, 11+1/12+1 Tech, 1Sl Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Sup May 19, 2025 at 6:48 PM, Niki (Modul) : Sziasztok @Boromisza Zoltán @Denkó Jani (F.A.) @Gerbovits Kevin gond van a fóliázógéppel! May 19, 2025 at 7:03 PM, Denkó Jani (F.A.) : Kész May 19, 2025 at 7:09 PM, Tóth Gyula : Sziasztok MOCNV036_M02 Nem jönnek ki a cellák May 19, 2025 at 7:11 PM, Denkó Jani (F.A.) : Megyünk führer May 19, 2025 at 7:12 PM, VK (mcs) : @FA Please check M0STK035 MCP 1F HP1 light curtain detect error. May 19, 2025 at 7:15 PM, Denkó Jani (F.A.) : Solved May 19, 2025 at 7:16 PM, Denkó Jani (F.A.) : @Tóth Gyula valószínűleg ez a hiba miatt nem ment hozzátok anyag ,kis türelmet kérünk, elvileg hamarosan lesz valami 🤷🏻‍♂️ May 19, 2025 at 7:18 PM, VK (mcs) : Carriers are on the way. May 19, 2025 at 7:20 PM, Tóth Gyula : Megindult... Köszönöm szépen. May 19, 2025 at 10:12 PM, Niki (Modul) : @Boromisza Zoltán hátsó raaktárban gond van May 19, 2025 at 10:12 PM, Boromisza Zoltán : Megyek May 19, 2025 at 10:22 PM, Boromisza Zoltán : Kész May 20, 2025 at 2:40 AM May 20, 2025 at 2:40 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán @Gerbovits Kevin line 4 műanyag hulladékos port nem akar dolgozni. Vegyétek rà pls a munkàra. Köszi. May 20, 2025 at 4:28 AM, Denkó Jani (F.A.) : Megy má ✌🏻 May 20, 2025 at 6:22 AM, Farkas Tamàs : Jó napot! FA Iváncsa "A" shift (6:00-18:00) 9+3 Tech, 1 SL Beteg: 1 Szabadságon: 1 Helyettesítés: 2 Túlórás: 1 ———————————— Electrode (4) Benczik Ádám Gutenkunst Ábel Skwarek Tibi Viczai Tamás ———————————— Assembly 1F(2) Nagy Tibor Vékony Ferenc ———————————— Assembly GF(3) Kertész Dani Magyar Imre Sopronyi Gábor ———————————— Formation/Modul(3) Brázik János Csepi Árpád Édl Tamás May 20, 2025 at 8:08 AM, FACS_JaewonShin : ■ 20th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 20, 2025 at 8:38 AM, Farkas Kevin : @Csepi Árpád Szia, tudsz esetleg jönni a 3as soron végére a lifthez? May 20, 2025 at 8:55 AM, Alexandra : 2f cv029 stop detect error May 20, 2025 at 9:13 AM, 윤성제(Yoon SungJe) : @FA Module raw material AGV ACS ALIVE ALARM has occurred. Please check AGV number 3. May 20, 2025 at 9:13 AM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 9:18 AM, FA-CS-AGV-Masoud : Solved May 20, 2025 at 9:19 AM, KIM SEYEON [김세연]_FA : @송호석(Ho seok song) 피엠님 금일 7라인 생산이 있을까요? May 20, 2025 at 9:21 AM, 송호석(Ho seok song) : 아니요 피엠님 금주 수요일 부터 생산예정이고, 자재는 빠르면 내일, 수요일부터는 채울생각입니다. May 20, 2025 at 9:22 AM, 송호석(Ho seok song) : 자동화 연동해서 런돌리는 시점에 내용 공유 한번 더 드리겠습니다. May 20, 2025 at 9:28 AM, Csepi Árpád : Solved May 20, 2025 at 10:01 AM, Farkas Kevin : Sziasztok. Külsős cég érkezett az automata raktárhoz tartozó tűzgátló ajtókat kalibrálni. El tudja valaki navigálni őket a területen? Jelenleg a Modul irodában vannak. May 20, 2025 at 10:04 AM, Csepi Árpád : Szia! Segíthetek? May 20, 2025 at 10:04 AM, Farkas Kevin : Kérlek :) May 20, 2025 at 10:50 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK023_C01 there is Crane Fork Left wide #1 check error. Several jobs are Alternated. Thank you very much! May 20, 2025 at 11:20 AM, 차용문/CHA YONGMOON : @배병민 (Bae Byoungmin) 7라인 저상 agv랑 셀 agv 간섭으로 막혀있습니다. May 20, 2025 at 11:21 AM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 11:25 AM, 송호석(Ho seok song) : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 7라인 금일 부터 연습생산 진행하겠습니다 피엠님. 셀은 써야되는 셀있어서 수동 투입 예정이고, 자재랑 모듈 더니지 콜 계획입니다. May 20, 2025 at 11:27 AM, Roland : Hello. Can you check M0STK023_C01, please. Some pallets are in queue. Thank you May 20, 2025 at 11:27 AM, Duna Don : Solved May 20, 2025 at 11:37 AM, FACS_TaehyeongJin : @mcs M0CNV033 Carrier id U014699 There is no job Check plz May 20, 2025 at 11:37 AM, Mohammad Amir : Checking Sir. May 20, 2025 at 11:38 AM, 윤성제(Yoon SungJe) : @FA Hello, please check the 7-line upper case gantry gripper clamp detect error. May 20, 2025 at 11:39 AM, Mohammad Amir : This message was deleted. May 20, 2025 at 11:39 AM, Mohammad Amir : Please inform me would you like to receive this carrier at M0CNV033_M03? Thank you very much! May 20, 2025 at 11:39 AM, FACS_TaehyeongJin : Yes May 20, 2025 at 11:40 AM, KIM SEYEON [김세연]_FA : @FACS_JaewonShin 팀장님 모듈7라인 대응 부탁드립니다. May 20, 2025 at 11:41 AM, Mohammad Amir : Job has been created successfully ✅. Carrier on its way to M0CNV033_M03 . I am monitoring for smooth delivery of the carrier. Thank you very much! May 20, 2025 at 11:41 AM, FACS_TaehyeongJin : 이동중입니다 May 20, 2025 at 11:44 AM, Mohammad Amir : Carrier U014699 has successfully arrived at M0CNV033_M03 at 11:42 ✅. Please collect it. Thank you very much! May 20, 2025 at 11:47 AM, FACS_JaewonShin : 알겠습니다. May 20, 2025 at 11:49 AM, Alexandra : Második emeleten a raktárban hiba van. May 20, 2025 at 11:49 AM, FACS_TaehyeongJin : 조치완료되었습니다 May 20, 2025 at 11:50 AM, 윤성제(Yoon SungJe) : 감사합니다 ㅠ May 20, 2025 at 11:51 AM, Mohammad Amir : @Csepi Árpád @FA @Brázik János Please check M0CNV023_RTV02 there is car stopper down time delay error that's why several jobs are getting delayed. Thank you very much! May 20, 2025 at 11:52 AM, Csepi Árpád : Solved May 20, 2025 at 11:52 AM, Mohammad Amir : Thank you very much! May 20, 2025 at 12:01 PM, FACS_Hyeongi Son : @SL Please pay more attention when wrapping paper There are a lot of defective wrapping In particular, the operators on the 2F floor need to check the hand-wrapping May 20, 2025 at 12:16 PM, KIM SEYEON [김세연]_FA : @송호석(Ho seok song) 피엠님 상기는 중요합니다. 저희 FA에서 인력이 없어서 에러대응도 근근히 하고 있는데, 래핑 잘 안돼서 오면 라이트커튼에러로 긴 시간 설비가 다운될겁니다. 교육 부탁드립니다. 감사합니다. May 20, 2025 at 12:20 PM, 송호석(Ho seok song) : 자재 별 발생 빈도가 있을까요. 전반적으로 재교육은 하겠지만 특정 자재면 좀 더 주의시키려고합니다. May 20, 2025 at 12:26 PM, FACS_Hyeongi Son : BMA박스랑 노란박스 자재가 특히 그렇습니다 오후에 제가 창고 가서 한번 더 확인하고 연락드리겠습니다 May 20, 2025 at 12:34 PM, 송호석(Ho seok song) : 네 BMA 및 노란박스(endplate)는 별도의 래핑 자재가 아닌 규격화 된 박스안에 적재 후 보내는 자재입니다. 감지센서 셋팅 위치/감도 같이 한번 확인해주시고, 초기 자재입고시에는 래핑되어 들어오는 걸로 알고있습니다. 해당 부분도 확인해보시면 좋을것 같습니다. 저희쪽도 신경 쓰도록하겠습니다. 감사합니다. May 20, 2025 at 2:23 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 주임님 BMA 박스 파랑 박스인걸까요? 엔드플레이트 노랑 박스는 혹시 실입고/회수 어떤 상황시 발생이 되는지도 재확인 부탁드립니다. May 20, 2025 at 2:24 PM, FACS_Hyeongi Son : 넵 재확인 하겠습니다 May 20, 2025 at 2:47 PM, 승규 (BAEK SEUNGGYU) : @FA M7MFA300 Overlapping of AGV movement lines in buffer section. Please check. May 20, 2025 at 2:48 PM, FA-CS-AGV-Masoud : Checking May 20, 2025 at 3:22 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK028_C01 there is MCP 0140MC03,MC04 on inverter power error. Thank you very much! May 20, 2025 at 3:27 PM, Csepi Árpád : Solved May 20, 2025 at 3:29 PM, Mohammad Amir : Thank you very much! May 20, 2025 at 3:32 PM, Mohammad Amir : Could you please check again ? Now there is light curtain error. Thank you very much! May 20, 2025 at 3:37 PM, Édl Tamás : Solved May 20, 2025 at 3:37 PM, Mohammad Amir : Thank you very much! May 20, 2025 at 4:33 PM, Mohammad Amir : @Édl Tamás Please check M0STK027_C01 there is Crane ankle right detect error. Thank you very much! May 20, 2025 at 4:39 PM, Édl Tamás : Solved May 20, 2025 at 4:40 PM, Mohammad Amir : Thank you very much! May 20, 2025 at 4:52 PM, Magosi Erik : @Csepi Árpád gyertek ki légyszi a 4es sor alsóburkolat gantryhez. Köszi May 20, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.20. "B" műszak, 12+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(0): Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(5): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromis May 20, 2025 at 9:43 PM, Kurkó Péter : Hello modulon a 4line out cnv nél a 11es AGV re valaki nézzen rá folyamat kiáll time out hibával köszi May 20, 2025 at 9:45 PM, Denkó Jani (F.A.) : Lass uns nachsehen May 20, 2025 at 9:50 PM, Kurkó Péter : Danke🐱 May 20, 2025 at 9:56 PM, Denkó Jani (F.A.) : gelöst 🙋🏻‍♂️ May 21, 2025 at 12:25 AM May 21, 2025 at 12:25 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán valaki legyen olyan kedves h a 7es soron felső burkolat gantry 6os buffer porton csekkolja a BCR olvasót. Folyamatosan hibàra àll, nem olvassa a palettàt. Köszi May 21, 2025 at 3:48 AM, Denkó Jani (F.A.) : Kész, paletta beolvasva,lehet használni. May 21, 2025 at 6:13 AM, Farkas Tamàs : Jó napot! FA Iváncsa "A" shift (6:00-18:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc May 21, 2025 at 7:23 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK012_P10 PIO interface error May 21, 2025 at 7:23 AM, Zoltán Harasztia FA : Cheking May 21, 2025 at 7:28 AM, Zoltán Harasztia FA : Solved May 21, 2025 at 8:26 AM, FACS_JaewonShin : ■ 21st May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 21, 2025 at 9:13 AM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0CNV023_36_035 wrapper heater Check alarm. Thank you very much! May 21, 2025 at 9:14 AM, Mohammad Amir : Heater Cover ** May 21, 2025 at 9:14 AM, Zoltán Harasztia FA : Cheking May 21, 2025 at 9:35 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS-team @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 해당 케리어 아이디가 상위 MCS/RTD상에서 검색이 되지않고 SCS상에서는 검색이 됩니다. 지난번과 같이 수동으로 배출이 필요하여, 해당제품 금일 오전에 이관예정이어서 지금 바로 수동 배출 부탁드입니다 FACS 매니저님.. bank : M0STK032 source : 0102302 carrier id : U014159 Dest EQP unit : M0CNV033_M03 May 21, 2025 at 9:35 AM, SKOH2/제조-셀,모듈 출하/김병호 : 지속적으로 이런 현상이 계속 발생되어 확인 부탁드립니다 May 21, 2025 at 9:51 AM, FACS_JaewonShin : 확인후 수동배출 하겠습니다. May 21, 2025 at 10:05 AM, FACS_JaewonShin : U014159 m0cnv033_m03으로 이송중입니다. May 21, 2025 at 10:22 AM, Ági : Sziasztok 2.emelet conveyor run time over error CV029 stop detect error May 21, 2025 at 10:26 AM, Mohammad Amir : @Zoltán Harasztia FA Please check this issue because of it one job is pending. Thank you very much! May 21, 2025 at 10:28 AM, Zoltán Harasztia FA : Cheking May 21, 2025 at 10:40 AM, Zoltán Harasztia FA : Solved May 21, 2025 at 10:41 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 10:42 AM, Ági : 2.emelet Megint nem megy tovább a paletta May 21, 2025 at 10:43 AM, Zoltán Harasztia FA : Megyek May 21, 2025 at 10:48 AM, Zoltán Harasztia FA : Kész May 21, 2025 at 10:50 AM, Roland : Hello. M0CNV021 - CV029 - Home Run time Error (PF22A-2503200017) Can you delete this job, please? May 21, 2025 at 10:51 AM, Zoltán Harasztia FA : Megyünk May 21, 2025 at 10:53 AM, Zoltán Harasztia FA : Kész May 21, 2025 at 4:04 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK026_C01 there is Crane fork left collapse detect 2 error. Thank you very much! May 21, 2025 at 4:04 PM, Zoltán Harasztia FA : Cheking May 21, 2025 at 4:08 PM, Zoltán Harasztia FA : Solved May 21, 2025 at 4:08 PM, Mohammad Amir : Thank you very much! May 21, 2025 at 4:32 PM, 박태영 invited 김 민성. May 21, 2025 at 5:19 PM, Mohammad Amir : @Zoltán Harasztia FA @FA Please check M0CNV023_P33/34 there is Inverter Not Ready CW/CCW error. Thank you very much! May 21, 2025 at 5:19 PM, Döme György F.A : Checking May 21, 2025 at 5:32 PM, Döme György F.A : Solved May 21, 2025 at 5:32 PM, Mohammad Amir : Thank you very much! May 21, 2025 at 6:16 PM, Jun(정우준)_SKOH FA : Night shift 05.21 18:00-06:00 Jeong woojun May 21, 2025 at 6:24 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (2): Magyar Balázs, Novák Károly Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 21, 2025 at 7:16 PM, Muneeb Ur Rehman : Agv 10 cell buffer Module Ground floor has the same alarm again. This AGV has the issue of Slam error rear traction motor. Please check it in the morning. For the time being I’m fixing and monitoring it May 21, 2025 at 7:54 PM, FACS_Youngmin LEE : @agv @Muneeb Ur Rehman can you turn off AGV10 at parking place? May 21, 2025 at 7:55 PM, Muneeb Ur Rehman : Yeah sure. I will find a node then turn it off May 21, 2025 at 7:55 PM, FACS_Youngmin LEE : and keep going monitoring AGV7 May 21, 2025 at 7:58 PM, Muneeb Ur Rehman : Yeah sure May 21, 2025 at 8:01 PM, FACS_Youngmin LEE : teach me plz problem node number May 21, 2025 at 8:21 PM, Muneeb Ur Rehman : Agv 10 Problem Node was 2308 and sometimes 2044. Mostly at the turning node. Now the AGV is parked at node 2669. May 21, 2025 at 8:42 PM, N.Gábor F.A. : This message was deleted. May 21, 2025 at 9:52 PM, Nemes Patrik : 2 f rtv car error May 22, 2025 at 6:29 AM May 22, 2025 at 6:29 AM, Farkas Tamàs : Jó napot! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Skwarek Tibi Simon Attila Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc May 22, 2025 at 8:13 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK021_C01 there is Crane Unload Timeout error . Thank you very much! May 22, 2025 at 8:13 AM, Zoltán Harasztia FA : Cheking May 22, 2025 at 8:15 AM, Zoltán Harasztia FA : Solved May 22, 2025 at 8:15 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 8:32 AM, FACS_JaewonShin : ■ 22nd May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 22, 2025 at 8:58 AM, Ági : Sziasztok 2.emelet Cv030 show detect error Product detect error May 22, 2025 at 8:59 AM, Zoltán Harasztia FA : Mindjárt megyünk May 22, 2025 at 9:08 AM, Mohammad Amir : @Sarvajcz Ferenc FA Please check M0STK022_C01 there is Crane Fork Right Collapse Detect 1 Error. Thank you very much! May 22, 2025 at 9:15 AM, Zoltán Harasztia FA : Kész May 22, 2025 at 9:21 AM, Döme György F.A : Checking May 22, 2025 at 9:29 AM, Döme György F.A : Solved May 22, 2025 at 9:34 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 12:06 PM, 윤성제(Yoon SungJe) : @FA @MCS Hello. No job was generated in M3MFA300_P02 T701336 RTD. This should be discharged to EMPTY PALLET. Can you create JOB? May 22, 2025 at 12:06 PM, Mohammad Amir : Checking Sir. May 22, 2025 at 12:08 PM, Mohammad Amir : Could you please tell me :- 1:- what is the current location of this carrier ? 2:-Where you would like to receive it? Thank you very much! May 22, 2025 at 12:10 PM, 윤성제(Yoon SungJe) : The current location is M3MFA300_P02 and this is OUT PORT. It's an empty pallet, and if it's discharged, there will be no problem. May 22, 2025 at 12:11 PM, Mohammad Amir : Thank you very much for the information! May 22, 2025 at 12:11 PM, 윤성제(Yoon SungJe) : A job has been created now. Thank you for your help. I am monitoring. May 22, 2025 at 12:12 PM, Mohammad Amir : I have resolved the issue ✅. Carrier on its way to STK013. Feel free to contact me again if you need any further assistance. Thank you very much! May 22, 2025 at 12:15 PM, 윤성제(Yoon SungJe) : I'm on the move after discharging. Thank you so much, T T. May 22, 2025 at 12:15 PM, Mohammad Amir : You are welcome Sir. May 22, 2025 at 1:12 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK026_C01 there is Light curtain detect error. Thank you very much! May 22, 2025 at 1:12 PM, Zoltán Harasztia FA : Cheking May 22, 2025 at 1:15 PM, Zoltán Harasztia FA : Solved May 22, 2025 at 1:15 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 1:31 PM, Mohammad Amir : @FA @Döme György F.A Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you very much! May 22, 2025 at 1:32 PM, Döme György F.A : Checking May 22, 2025 at 1:33 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 1:41 PM, Döme György F.A : Solved May 22, 2025 at 2:17 PM, Mohammad Amir : @Döme György F.A Please check M0STK027_C01 there is Crane ankle right detect error. Thank you very much! May 22, 2025 at 2:17 PM, Zoltán Harasztia FA : Cheking May 22, 2025 at 2:19 PM, Zoltán Harasztia FA : Solved May 22, 2025 at 2:19 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 2:48 PM, Mohammad Amir : @Döme György F.A Please check M0STK027_C01 there is Crane ankle right detect error again. Thank you very much! May 22, 2025 at 2:49 PM, Döme György F.A : Checking May 22, 2025 at 2:49 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK026_C01 there is Double cargo error. Several jobs are pending. Thank you very much! May 22, 2025 at 2:50 PM, Zoltán Harasztia FA : @Mohammad Amir Hi, we have a material PS230-2505170008 on port M0CNV023 P31-, but it has no destination station. Could you check where it went? May 22, 2025 at 2:50 PM, Mohammad Amir : Checking May 22, 2025 at 2:52 PM, Zoltán Harasztia FA : Solved May 22, 2025 at 2:53 PM, Mohammad Amir : Please check port M4MFA300_P29 ,it is OOS . I am monitoring, please fix this port first. Thank you very much! May 22, 2025 at 2:53 PM, Mohammad Amir : Thank you very much 🙏 May 22, 2025 at 2:55 PM, Zoltán Harasztia FA : The port was in manual mode. May 22, 2025 at 2:55 PM, Mohammad Amir : Issue has been resolved now ✅ AGV#2 will be bringing this material to M4MFA300_P29. Thank you very much! May 22, 2025 at 2:56 PM, Zoltán Harasztia FA : It’s already working, thank you for your help. May 22, 2025 at 2:56 PM, Mohammad Amir : You are welcome! May 22, 2025 at 2:57 PM, Döme György F.A : Solved May 22, 2025 at 2:57 PM, Mohammad Amir : Thank you very much! 🙏 May 22, 2025 at 2:57 PM, Döme György F.A : Szívesen May 22, 2025 at 3:35 PM, Ági : Sziasztok Agv robot nem megy a palettáért, de hiba jelzés nincs. Megtudnátok nézni? 2.emelet May 22, 2025 at 3:35 PM, FA/CS/AGV/Taimur : Checking May 22, 2025 at 3:35 PM, Zoltán Harasztia FA : Megyünk May 22, 2025 at 3:41 PM, Zoltán Harasztia FA : @Mohammad Amir Hi, could you check where the material PS290-2503070036-OS on port M0CNV023 B03 is going? It keeps stopping continuously. May 22, 2025 at 3:42 PM, Mohammad Amir : Hello, Checking May 22, 2025 at 3:45 PM, Mohammad Amir : Currently There is no Job for this carrier that's why it is not moving. Where you would like to receive it ,I will create a command for it. Thank you very much! May 22, 2025 at 3:47 PM, Zoltán Harasztia FA : Then please send it back to the warehouse where it came from. May 22, 2025 at 3:47 PM, Mohammad Amir : Sure, Working on it. May 22, 2025 at 3:51 PM, Zoltán Harasztia FA : Thank you for your help. It has already started moving. May 22, 2025 at 3:51 PM, Mohammad Amir : I have given it command to store in warehouse. ✅ I am monitoring for smooth transfer. Thank you very much! May 22, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1): Magyar Balázs, Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 22, 2025 at 6:17 PM, Jun(정우준)_SKOH FA : Night shift 05.22 18:00-06:00 Jeong woojun May 22, 2025 at 9:12 PM, Dávid F.A. : @MCS Good evening! I would like to ask for help! Transfer Job I see a job Source Machine STK014 ID:. MNL20250522145904 Desk Machine not found I checked physically. Please delete the job. thank you May 22, 2025 at 9:14 PM, Shakir (MCS) : Job has been cancelled as per request ✅ Thank you May 22, 2025 at 9:14 PM, Dávid F.A. : Nagyon köszönöm! May 23, 2025 at 6:11 AM May 23, 2025 at 6:11 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 3 Overtime ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 23, 2025 at 7:43 AM, Alexandra : 2f out lift conveyor det error May 23, 2025 at 7:47 AM, Csepi Árpád : Solved May 23, 2025 at 8:10 AM, FACS_JaewonShin : ■ 23rd May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 23, 2025 at 9:28 AM, duzzaman Md (MCS) : @FA M0STK021_C01 Crane unload timeout Thanks May 23, 2025 at 9:28 AM, duzzaman Md (MCS) : Please check May 23, 2025 at 9:34 AM, Édl Tamás : Solved May 23, 2025 at 10:06 AM, duzzaman Md (MCS) : @FA Please check M0STK033_C01 there is Crane SRC Disconnected Error. Thank you ! May 23, 2025 at 10:14 AM, Roland : Hello. Please check M0CNV022 - CV15 Div pallet detect error. Thank you ! May 23, 2025 at 10:17 AM, Csepi Árpád : Solved May 23, 2025 at 10:23 AM, Édl Tamás : Solved May 23, 2025 at 11:09 AM, Roland : Hello. Can you check M0STK024_C01 crane, please? Thank you! May 23, 2025 at 12:17 PM, Magosi Erik : @Csepi Árpád Szia! Ki tudnátok jönni a L3-L4 közti alapanyag lifthez? Van egy cv04 stop detect error May 23, 2025 at 12:17 PM, Magosi Erik : Köszi May 23, 2025 at 12:21 PM, Csepi Árpád : Kész May 23, 2025 at 12:34 PM, Magosi Erik : Köszi May 23, 2025 at 1:05 PM, Roland : Hello. Please check M0STK023 - Crane fork right collapse error and M0STK021 - Double cargo error. Thank you May 23, 2025 at 1:11 PM, Brázik János : M0STK21 Solved May 23, 2025 at 1:12 PM, Csepi Árpád : Solved May 23, 2025 at 1:31 PM, duzzaman Md (MCS) : Dear @Csepi Árpád Please check M0STK021 Crane is OOS. Thank you May 23, 2025 at 1:43 PM, Csepi Árpád : Solved May 23, 2025 at 1:55 PM, duzzaman Md (MCS) : @FA Please check M0CNV022 - Div pallet detect error. Thank you ! May 23, 2025 at 2:07 PM, Csepi Árpád : Solved May 23, 2025 at 3:09 PM, Maczó Anikó : Sziasztok 2 emeleten 84001 Conveyor nem viszi be az anyagot a raktárba . Köszönöm May 23, 2025 at 3:10 PM, duzzaman Md (MCS) : @FA Please check M0CNV023_RTV02 ,there is RTV car stopper down. Thank you! May 23, 2025 at 3:20 PM, Csepi Árpád : Solved May 23, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 11+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(0): Translater: -- --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Hara May 23, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 10+1+1/12+1 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(1): Böröczki Balázs Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Harasztia Zoltán -------------- May 23, 2025 at 6:28 PM, 승규 (BAEK SEUNGGYU) : @FA M3MFA300_P30 Materials are not coming from M0STK021. Carrier ID:PS210-2504040074. Please check. May 23, 2025 at 6:34 PM, VK (mcs) : @FA Please check M0STK021 Crane fork right WIDE#2 check error. May 23, 2025 at 6:36 PM, Szücs Géza FT-B : @Zoltán Harasztia FA like és stb jel nem megfelelő reakció. Vezetőség kérte, hogy írásban legyen inkább jelezve. erre figyeljetek, kösszi May 23, 2025 at 6:37 PM, Zoltán Harasztia FA : Tudom csak még nem értünk át azét csak likeoltam May 23, 2025 at 6:37 PM, Zoltán Harasztia FA : Solved May 23, 2025 at 7:56 PM, VK (mcs) : @FA Please check M0STK021 Crane unload timeout. May 23, 2025 at 7:57 PM, Zoltán Harasztia FA : Cheking May 23, 2025 at 7:59 PM, Zoltán Harasztia FA : Solved May 24, 2025 at 12:17 AM May 24, 2025 at 12:17 AM, VK (mcs) : @FA Please check M0STK021 Crane fork left collapse detect 3 May 24, 2025 at 12:17 AM, Zoltán Harasztia FA : Cheking May 24, 2025 at 12:29 AM, Zoltán Harasztia FA : Solved May 24, 2025 at 1:45 AM, Horváth Adriàn : 2es AGV line 4 ACS alive alarm folyamatosan megàll. May 24, 2025 at 1:48 AM, FA CS AGV David 데이비드 : Solved May 24, 2025 at 2:39 AM, Horváth Adriàn : Line 3 AGV 6 work data problem Check please. May 24, 2025 at 2:39 AM, FA CS AGV David 데이비드 : Coming May 24, 2025 at 2:41 AM, FA CS AGV David 데이비드 : Solved May 24, 2025 at 5:15 AM, VK (mcs) : @FA Please check 2F. M0STK024 Crane fork left collapse detect 2. May 24, 2025 at 5:16 AM, Zoltán Harasztia FA : Cheking May 24, 2025 at 5:25 AM, Zoltán Harasztia FA : Solved May 24, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime, 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 24, 2025 at 8:13 AM, duzzaman Md (MCS) : @FA Please check M0STK027, 028 Crane fork left collapse detect. Thank you May 24, 2025 at 8:24 AM, duzzaman Md (MCS) : @Édl Tamás also please check M0CNV023_RTV02 It's OOS too May 24, 2025 at 8:57 AM, Édl Tamás : Solved May 24, 2025 at 8:57 AM, Édl Tamás : Solved May 24, 2025 at 11:36 AM, duzzaman Md (MCS) : This message was deleted. May 24, 2025 at 11:37 AM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 there is MCP SMC#1 Disconnected Error. Thank you ! May 24, 2025 at 11:57 AM, Édl Tamás : Solved May 24, 2025 at 2:55 PM, duzzaman Md (MCS) : Please check M0STK031_C01 there is MCP SMC#1 Disconnected Error. Thank you ! May 24, 2025 at 3:19 PM, Sánta László : Hi all! The empty dunnage is not arriving at Module Line 3. Please check it! Thank you! May 24, 2025 at 3:30 PM, duzzaman Md (MCS) : Its because stk031 was OOS. Now, new job has been created May 24, 2025 at 3:30 PM, duzzaman Md (MCS) : Please check this one. May 24, 2025 at 3:31 PM, Sánta László : Okay! Thank you very much! May 24, 2025 at 3:34 PM, Csepi Árpád : Solved May 24, 2025 at 3:39 PM, Sánta László : The empty dunnage has arrived at Line 4, but not at Line 3. May 24, 2025 at 3:47 PM, duzzaman Md (MCS) : Carrier started move for Line 3. May 24, 2025 at 3:51 PM, Sánta László : It has arrived! May 24, 2025 at 3:51 PM, Sánta László : Thank you! May 24, 2025 at 3:52 PM, duzzaman Md (MCS) : Anytime for you. It was for the crane STK issue. May 24, 2025 at 5:42 PM, Alexandra : 2f in lift conveyor det error May 24, 2025 at 5:45 PM, Csepi Árpád : Checked! May 24, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23á4. "B" műszak, 12+2/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(0): Shift Change(0): Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(2): 방혁_이반차 (Bang Hyuk May 24, 2025 at 7:54 PM, Niki (Modul) : Sziasztok @Boromisza Zoltán @Gerbovits Kevin lift nem megy le May 24, 2025 at 8:05 PM, Gerbovits Kevin : Mindjárt megyünk May 24, 2025 at 8:26 PM, Niki (Modul) : @Boromisza Zoltán fólia előtt megállt az anyag May 24, 2025 at 8:28 PM, Boromisza Zoltán : Hamarosan ott leszünk May 24, 2025 at 9:03 PM, Boromisza Zoltán : Kész May 24, 2025 at 9:31 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC#1 disconnected error. May 24, 2025 at 9:48 PM, Niki (Modul) : @Boromisza Zoltán fóliázónál az anyag megállt May 24, 2025 at 9:56 PM, Boromisza Zoltán : Hamarosan ott vagyunk May 24, 2025 at 9:56 PM, Boromisza Zoltán : Okey May 24, 2025 at 9:58 PM, Boromisza Zoltán : @Szücs Géza FT-B valószínű PLC hiba van a box packingon kérünk segítséget ez túl nőt rajtunk May 24, 2025 at 9:59 PM, Szücs Géza FT-B : rendben May 24, 2025 at 10:00 PM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA Please help to technicians on Modul Bock packing. Thank You May 24, 2025 at 10:02 PM, 방혁 PM(Bang.Hyuk) FA : Okay May 24, 2025 at 10:32 PM, Boromisza Zoltán : @Szücs Géza FT-B M0SZK031 daru hiba üzenetek Lift inverter fault MPC SMC#1 disconnected error Nem tudjuk vissza kapcsolni segítséget kérünk múltkor is hasonló volt a hiba csak a koreai CS -es kollégák oldották meg PLC-s úton May 24, 2025 at 10:32 PM, VK (mcs) : @Manufacturing Please check M3MFA300-P29. Its out of service and carrier is waiting in CNV out put port and blocked the way. Thx May 24, 2025 at 10:34 PM, VK (mcs) : @FA Please check 2F M0CN 023-35028 Wrapper Light curtain detect error May 24, 2025 at 10:39 PM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA Can u check this too? May 24, 2025 at 10:39 PM, Boromisza Zoltán : Okey May 24, 2025 at 10:42 PM, 방혁 PM(Bang.Hyuk) FA : Yes May 24, 2025 at 10:47 PM, Horváth Adriàn : Sziasztok. Összefüggésben van a probléma azzal hogy nem üzemel az alapanyag raktàr modul line 3-4 között? May 24, 2025 at 11:11 PM, Niki (Modul) : Nálunk még áll fent a cucc May 24, 2025 at 11:19 PM, 방혁 PM(Bang.Hyuk) FA : 금일 모듈 제조담당분 계십니까 May 24, 2025 at 11:27 PM, Boromisza Zoltán : Jövünk May 24, 2025 at 11:27 PM, Boromisza Zoltán : Folyamatban May 24, 2025 at 11:29 PM, 김지수PM(Gyuri)_FA : 박스포장기 쪽 제조 담당자분 오시면, 전화 좀 부탁드리겠습니다. May 24, 2025 at 11:31 PM, Horváth Adriàn : A màr leérkezett árút mért nem szedi ki az AGV ha befele meg pakol? 😀 May 24, 2025 at 11:32 PM, Boromisza Zoltán : Mindjárt ott vagyunk de most a másodikon oldjuk meg s problémát May 24, 2025 at 11:36 PM, VK (mcs) : @FA Can you please check this issue. There is no response from manufacturing. Thx May 24, 2025 at 11:38 PM, Boromisza Zoltán : Solved May 24, 2025 at 11:39 PM, Kovács Kármen : Now P29 is working. May 25, 2025 at 4:37 AM May 25, 2025 at 4:37 AM, Niki (Modul) : @Boromisza Zoltán hátsó raktárban gond van May 25, 2025 at 5:08 AM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin két törpe AGV kicsit közel ment egymàshoz és sírnak.. Orvosoljàtok pls May 25, 2025 at 5:09 AM, FA CS AGV David 데이비드 : I'm coming May 25, 2025 at 5:16 AM, Gerbovits Kevin : Kész May 25, 2025 at 5:20 AM, Boromisza Zoltán : Oké May 25, 2025 at 5:21 AM, FA CS AGV David 데이비드 : Solved May 25, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) Technician, 1 Sl, 1 Overtime 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 25, 2025 at 6:34 AM, Csepi Árpád : @ mcs Hi! The M0STK031 crane is in automatic mode. May 25, 2025 at 6:34 AM, Mohammad Amir : Hello, Thank you very much for the information! May 25, 2025 at 9:06 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK026_C01 there is CRANE Shelf in abort(Double Cargo) error. Thank you! May 25, 2025 at 9:34 AM, Csepi Árpád : Solved May 25, 2025 at 9:34 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 12:32 PM, Csepi Árpád : @Mohammad Amir Hello! I need your help! There is a pending task on port M0STK011_P06. ID: R 111233 Thank you very much! May 25, 2025 at 12:32 PM, Mohammad Amir : Hello, Checking! May 25, 2025 at 12:33 PM, Csepi Árpád : Okay May 25, 2025 at 12:41 PM, Mohammad Amir : The job was terminated by the operator at 12:28 that's why it is not moving. I have given it command to store in the warehouse STK012,I am monitoring for smooth transfer ✅. Thank you very much! May 25, 2025 at 12:48 PM, Mohammad Amir : @Csepi Árpád Carrier R111233 has been successfully stored in warehouse M0STK012(0200406 ) at 12:47.✅. Thank you very much! May 25, 2025 at 12:48 PM, Csepi Árpád : Köszönöm szépen! 👌 May 25, 2025 at 12:49 PM, Mohammad Amir : Szívesen! May 25, 2025 at 2:12 PM, Maczó Anikó : Sziasztok 2 emeleten Cv027 stop detect error Plusz a foliázonál le eset a hőfok May 25, 2025 at 2:13 PM, Maczó Anikó : A hőfok megy vissza May 25, 2025 at 2:22 PM, Maczó Anikó : Most már magasabb a hőfok May 25, 2025 at 2:28 PM, Csepi Árpád : Solved May 25, 2025 at 2:56 PM, Maczó Anikó : Sziasztok 2 emeleten meg állt az anyag nem megy tovább de hibát nem jelez meg tudnátok nézni . Köszönöm May 25, 2025 at 3:03 PM, Csepi Árpád : Azért áll a továbbítás mert a földszinten nincs hely a palettának! May 25, 2025 at 4:17 PM, Deepu Divan FA-Eng : Photo May 25, 2025 at 4:17 PM, Deepu Divan FA-Eng : Announcement in Boards: Photo May 25, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.25. "B" műszak, 12+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(0): Sick(0): Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Harasztia Z May 25, 2025 at 6:12 PM, Shakir (MCS) : @FA Please check M0STK013_C01 there is Crane PLC interface Error. Thank you! May 25, 2025 at 6:20 PM, Shakir (MCS) : @Boromisza Zoltán Please this 2 job has been alternated for EOL line 9/10. Thank you May 25, 2025 at 6:21 PM, Boromisza Zoltán : Okey May 25, 2025 at 6:21 PM, Boromisza Zoltán : Okey May 25, 2025 at 6:57 PM, Boromisza Zoltán : Solved May 25, 2025 at 6:57 PM, Boromisza Zoltán : Solved May 25, 2025 at 8:46 PM, Shakir (MCS) : @FA Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you ! May 25, 2025 at 8:47 PM, Zoltán Harasztia FA : Cheking May 25, 2025 at 8:48 PM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin line 4 elött az AGV Acs alive error miatt megfeküdt. Check pls May 25, 2025 at 8:50 PM, Boromisza Zoltán : Úton May 25, 2025 at 8:50 PM, Zoltán Harasztia FA : Solved May 25, 2025 at 9:00 PM, Boromisza Zoltán : Kész May 25, 2025 at 10:32 PM, Niki (Modul) : @Boromisza Zoltán hátsó raktár káosz May 25, 2025 at 10:37 PM, Boromisza Zoltán : Úton May 25, 2025 at 10:38 PM, Shakir (MCS) : @FA Please check M0CNV023_82_040,20 light curtain error Thank you May 25, 2025 at 10:47 PM, Boromisza Zoltán : Solved May 25, 2025 at 10:47 PM, Boromisza Zoltán : Kész May 25, 2025 at 11:47 PM, Shakir (MCS) : @FA Please check M0STK034_C01 there is MCP 0140MC03,MC04 on inverter power error. Thank you May 25, 2025 at 11:48 PM, Zoltán Harasztia FA : Cheking May 25, 2025 at 11:53 PM, Zoltán Harasztia FA : Solved May 26, 2025 at 12:23 AM May 26, 2025 at 12:23 AM, FA-CS-AGV-Masoud : @Boromisza Zoltán Please check M0STK011_P05 SEW travel X fault Thanks May 26, 2025 at 12:25 AM, Boromisza Zoltán : Okey May 26, 2025 at 12:46 AM, Kurkó Péter : Hello modul 3line endplate gantry: gripper reverse detect error Pls fix it thx May 26, 2025 at 12:47 AM, Zoltán Harasztia FA : Megyünk May 26, 2025 at 2:08 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA please check port MFMFA300_P22 Thanks May 26, 2025 at 2:09 AM, Zoltán Harasztia FA : Cheking May 26, 2025 at 2:17 AM, Zoltán Harasztia FA : @mcs Hi, I would like to cancel a command because the operator accidentally pressed the button on the wrong port. They tried to return the material PS290-2502070029- to the warehouse from port M4MFA300 P22. Please delete this command. May 26, 2025 at 2:21 AM, Shakir (MCS) : The job has been cancelled as per request. Thank you May 26, 2025 at 2:21 AM, Zoltán Harasztia FA : Thank you for your help. May 26, 2025 at 3:31 AM, Kovács Kármen : @Boromisza Zoltán @Gerbovits Kevin sziasztok! #13 AGV ACS Alive error. Dokk folyosón. Nézzétek meg kérlek. Köszi May 26, 2025 at 3:32 AM, FA-CS-AGV-Masoud : Coming May 26, 2025 at 3:36 AM, FA-CS-AGV-Masoud : Solved May 26, 2025 at 3:42 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK012_P10 Thanks May 26, 2025 at 3:43 AM, Zoltán Harasztia FA : Cheking May 26, 2025 at 3:51 AM, Gerbovits Kevin : Solved May 26, 2025 at 6:08 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Nagy Zsolt, Kasztel Balázs Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(4): GF: Novák Zoltán, Zsurbej Zsolt 1F: Novák Károly, Kovács Szabolcs, Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs May 26, 2025 at 6:49 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun May 26, 2025 at 7:27 AM, 윤성제(Yoon SungJe) : @FA Hello, can you tell me why M3MFA300_P01,P03 is in QUEUED status? Is there a problem with STK012? May 26, 2025 at 7:30 AM, duzzaman Md (MCS) : Carrier is moving for P01 May 26, 2025 at 7:31 AM, 윤성제(Yoon SungJe) : Thank you, and I am monitoring. May 26, 2025 at 7:32 AM, duzzaman Md (MCS) : For P03, no problem from MCS side. It should started moving too. May 26, 2025 at 7:36 AM, 윤성제(Yoon SungJe) : Now AGV12 is moving cell PALLET it will go to P03 May 26, 2025 at 8:12 AM, duzzaman Md (MCS) : @FA M0STK 023_c01 MCP 2F OP2 light curtain detect error. May 26, 2025 at 8:19 AM, Dávid F.A. : Solved! May 26, 2025 at 8:24 AM, FACS_JaewonShin : ■ 26th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 26, 2025 at 10:36 AM, N.Gábor F.A. : @MCS Hello I would like to request that Modulon supply M3MFA300 and M3MFA400 from warehouse M0STK014 in order to ensure smooth production. Can this be resolved? May 26, 2025 at 10:39 AM, duzzaman Md (MCS) : Hi, there are existing jobs and as per MCS, there is nothing wrong with the automatic process. May 26, 2025 at 10:41 AM, N.Gábor F.A. : There is no problem with it at the moment, but previously there was a period where the job waited for almost 1 hour, and the line almost emptied because of this. May 26, 2025 at 10:48 AM, Sazzad Bhai SKon : Please tell me the destination port name, I'll check the reason for delay May 26, 2025 at 10:50 AM, N.Gábor F.A. : M3MFA300 P01&P03 M3MFA400 P01&P03 May 26, 2025 at 10:53 AM, 윤성제(Yoon SungJe) : Hello, did you mean the cell input port? May 26, 2025 at 10:54 AM, N.Gábor F.A. : Yes May 26, 2025 at 10:57 AM, 윤성제(Yoon SungJe) : Correct it. M3MFA300_P01,P03 M4MFA300_P02,P04 Thank you so much. May 26, 2025 at 10:58 AM, N.Gábor F.A. : thank you for the correction May 26, 2025 at 11:05 AM, Sazzad Bhai SKon : T702647 received a job for M3MFA300_P01 at 7:59. source STK M0STK012 received the job with HCACK '4'. But transfer initiated by SCS at 9:08 STK had lots of jobs during this time May 26, 2025 at 11:09 AM, N.Gábor F.A. : Currently, the M0STK012 warehouse has 9 jobs, 6 of which are queued. Production indicated to me that the pallets are slowly arriving on the lines May 26, 2025 at 1:26 PM, duzzaman Md (MCS) : @FA Please check M0STK022_C01 there is Crane fork left wide #2 check error. Thank you! May 26, 2025 at 1:32 PM, Roland : Hello. Can you check M0CNV021 - CV015 Div pallet Detect error and work data error, please? Thank you May 26, 2025 at 1:55 PM, Dávid F.A. : Please remove the edge protector when loading because it causes a warehouse error.. thank you! Problem solved May 26, 2025 at 3:46 PM, N.Gábor F.A. : I would like to point out again that only M0STK012 is unable to supply the lines with material and do its other tasks on time, while M0STK014 barely has any work to do. The material is again arriving very slowly to the M4MFA300 line. May 26, 2025 at 3:49 PM, duzzaman Md (MCS) : We can see there's an error. Process type not matched transport machine exist in route. For this reason, jobs are veing alternated. May 26, 2025 at 4:13 PM, Nemes Patrik : 2F cv27 error May 26, 2025 at 4:19 PM, Nemes Patrik : Problem solved May 26, 2025 at 5:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_Team 북쪽 모듈 도크장 1F 알람 발생하여 모듈 배출이 안되고 있습니다. 확인 부탁드립니다 M0STk031_P12 May 26, 2025 at 5:39 PM, FACS_Youngmin LEE : 조치되었습니다. May 26, 2025 at 6:06 PM, Shakir (MCS) : @Fa Please check M0STK012_M01, Port validation timeout. Thank you May 27, 2025 at 1:06 AM May 27, 2025 at 1:06 AM, Shakir (MCS) : @FA Please check M0STK031 MCP SMC#1 disconnected error. Thank you May 27, 2025 at 1:07 AM, Zoltán Harasztia FA : Cheking May 27, 2025 at 1:13 AM, Zoltán Harasztia FA : Solved May 27, 2025 at 5:42 AM, Zoltán Harasztia FA : @ mcs Hi, could you please check why there is no command for the material T704785 located on port M0STK012 P06? It has lost its destination. May 27, 2025 at 5:48 AM, Shakir (MCS) : Job exists for this carrier, but the current location is NA. Please confirm the location. Thank you May 27, 2025 at 5:50 AM, Shakir (MCS) : M0STK012_P16, carrier data receive timeout May 27, 2025 at 5:51 AM, Zoltán Harasztia FA : Yes, the material is currently at port M0STK012 P06. May 27, 2025 at 5:59 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+2 overtime Overtime (2): Böröcz Tamás, Cehman Zsolt Sick (0):- Holiday (4): Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt, Martina Dávid Shift change(0): Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Cehman Zsolt Assembly(4): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Böröcz Tamás Modul(2): Nagy Gábor, Magyar Balázs May 27, 2025 at 6:34 AM, Jun(정우준)_SKOH FA : Day shift 05.27 06:00-18:00 Jeong woojun May 27, 2025 at 8:01 AM, 윤성제(Yoon SungJe) : @Choi Inbo/최인보 @최용회 안녕하세요 pm님 3라인 PF221-2505170001 (endplate) 5월25일 04:46분경 자동화로 내려온 이력은있는데 MES 입고가 되지 않았습니다 확인 부탁드립니다 May 27, 2025 at 8:17 AM, Choi Inbo/최인보 : 네 확인해서 공유드리겠습니다 May 27, 2025 at 8:20 AM, 윤성제(Yoon SungJe) : 네 감사합니다 May 27, 2025 at 8:49 AM, 윤성제(Yoon SungJe) : @FA Hello, all AGVs are gathered in the 5-line cell input area. The movement seems to be twisted. Can you check it? May 27, 2025 at 8:50 AM, Muneeb Ur Rehman : Checking May 27, 2025 at 8:53 AM, FACS_JaewonShin : ■ 27th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 27, 2025 at 9:10 AM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you ! May 27, 2025 at 9:18 AM, N.Gábor F.A. : Solved May 27, 2025 at 10:43 AM, duzzaman Md (MCS) : Thank you. Please check M0CNV031_RTV01 there is Interface Error! May 27, 2025 at 10:44 AM, 윤성제(Yoon SungJe) : @FA Hello, we are not entering the finished product pallet warehouse of the end port module. Can you check it? May 27, 2025 at 10:45 AM, N.Gábor F.A. : Checking May 27, 2025 at 10:57 AM, N.Gábor F.A. : Solved May 27, 2025 at 10:58 AM, 윤성제(Yoon SungJe) : @FAA lift work data mismatch alarm has occurred between the 3rd and 4th lines of the module. Please check AGV. AGV number 1. May 27, 2025 at 10:58 AM, Duna Don : Checking May 27, 2025 at 11:02 AM, Duna Don : Solved! May 27, 2025 at 11:22 AM, duzzaman Md (MCS) : @FA PLEASE CHECK M0STK012_P09 AGV PIO INTERFACE error May 27, 2025 at 11:40 AM, duzzaman Md (MCS) : @FA Please check M0STK031 MCP SMC#1 disconnected error. Thank you May 27, 2025 at 11:44 AM, N.Gábor F.A. : Checking May 27, 2025 at 11:50 AM, duzzaman Md (MCS) : Also, kindly check M0CNV021_M03 Work data error May 27, 2025 at 11:51 AM, N.Gábor F.A. : Solved May 27, 2025 at 12:07 PM, Roland : Hello. Can you check M0CNV022 - Rtv car cw run time delay error, please? Thank you May 27, 2025 at 12:12 PM, FACS_Hyeongi Son : @mcs Hello Can you move this product? T703091 M0STK014_P08->M0STK014_P01 May 27, 2025 at 12:16 PM, duzzaman Md (MCS) : Job created and we got HCACK 4 reply. May 27, 2025 at 12:17 PM, FACS_Hyeongi Son : Thank you:) May 27, 2025 at 12:19 PM, N.Gábor F.A. : Done May 27, 2025 at 12:40 PM, FACS_Hyeongi Son : I'm sorry, but can you make job for this again? May 27, 2025 at 12:40 PM, FACS_Hyeongi Son : @mcs May 27, 2025 at 12:40 PM, Sazzad Bhai SKon : We'll check May 27, 2025 at 12:43 PM, FACS_Hyeongi Son : It's solved Thanks May 27, 2025 at 1:12 PM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you ! May 27, 2025 at 1:14 PM, N.Gábor F.A. : Checking May 27, 2025 at 1:18 PM, duzzaman Md (MCS) : Please check this one too🙏 May 27, 2025 at 1:20 PM, N.Gábor F.A. : In CCS i can't see any problem this port May 27, 2025 at 1:21 PM, duzzaman Md (MCS) : Sorted it from MCS. Thank you May 27, 2025 at 1:21 PM, N.Gábor F.A. : Your welcome May 27, 2025 at 1:50 PM, duzzaman Md (MCS) : @FA Please check M0STK027 Crane fork left collapse detect. Thank you 🙏 May 27, 2025 at 1:53 PM, N.Gábor F.A. : On the way May 27, 2025 at 2:00 PM, duzzaman Md (MCS) : @F.A.Balazs Please check M0STK013_C01 there is Crane PLC interface Error. Thank you! May 27, 2025 at 2:01 PM, N.Gábor F.A. : Our Korean colleagues are working on it. We ask for your patience. May 27, 2025 at 2:30 PM, N.Gábor F.A. : @Duna Don Could you come to the beginning of line 2 of module, there is something interesting here with the agv. May 27, 2025 at 2:30 PM, Duna Don : Coming May 27, 2025 at 2:30 PM, N.Gábor F.A. : Thank you May 27, 2025 at 2:36 PM, Duna Don : Solved May 27, 2025 at 2:37 PM, N.Gábor F.A. : Thank you May 27, 2025 at 2:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남측 모듈 도크 GF 입고 포트 알람 발생하여 확인 부탁드립니다 May 27, 2025 at 2:50 PM, FACS_Hyeongi Son : 이동하겠습니다 May 27, 2025 at 3:03 PM, FACS_Hyeongi Son : 조치 완료하였습니다 May 27, 2025 at 3:18 PM, Sazzad Bhai SKon : @FA @manufacturing Z300736 has been stored as in UNK carrier at M0STK012 (0201902) May 27, 2025 at 3:23 PM, SKOH2/제조-셀,모듈 출하/김병호 : @RTD/MCS team M0CNV033_M02 carrier id : U026361 CCS created a receiving command, but the destination information is not marked, and the product is not moving. Please check May 27, 2025 at 3:25 PM, Sazzad Bhai SKon : It has previous existing job destination at M0STK031 May 27, 2025 at 4:04 PM, duzzaman Md (MCS) : Should we delete the previous job and create a new one ? May 27, 2025 at 4:21 PM, SKOH2/제조-셀,모듈 출하/김병호 : Yes, please. May 27, 2025 at 4:34 PM, Nemes Patrik : This message was deleted. May 27, 2025 at 5:19 PM, duzzaman Md (MCS) : Just wanted to recheck , it should already be at the destination. May 27, 2025 at 5:30 PM, 이민영(Minyoung Lee) : Cell shipment AGV stopped due to alarm (near dock) May 27, 2025 at 5:31 PM, Muneeb Ur Rehman : Yes I’m coming May 28, 2025 at 12:10 AM May 28, 2025 at 12:10 AM, András : Sziasztok 2. emeleten floor in position error and lift GF stop time error May 28, 2025 at 12:11 AM, Döme György F.A : Máris nézem May 28, 2025 at 12:11 AM, András : Köszönöm May 28, 2025 at 12:15 AM, Döme György F.A : Kész May 28, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 28, 2025 at 6:42 AM, Maczó Anikó : Sziasztok 2.-dik emeleten Cv036 stop detect error Cv036 product detect error Köszönöm May 28, 2025 at 6:46 AM, Mohammad Amir : @Csepi Árpád Please check M0STK028_C01 there is CRANE FORK left wide #1 check error. Thank you very much! May 28, 2025 at 7:01 AM, Csepi Árpád : El készült! May 28, 2025 at 7:35 AM, 김지형(Jihyung Kim) : Module Dunnage AGV No.9 ACS alive error May 28, 2025 at 7:35 AM, Duna Don : Checking May 28, 2025 at 7:37 AM, Duna Don : Solved May 28, 2025 at 7:40 AM, Mohammad Amir : @Csepi Árpád @Brázik János Please inform me ,Are you working on M0STK028? It is still out of service and several jobs are pending. Thank you very much! May 28, 2025 at 7:43 AM, Csepi Árpád : Solved May 28, 2025 at 7:44 AM, 윤성제(Yoon SungJe) : @이민호 MINHO @윤경환 안녕하세요 pm님 조장님 3라인 엔드플레이트 PF221-2505170001 3라인 로어 케이스 PS22A-2505220002 4라인 로어 케이스 PS22A-2505200076 4라인 BMA PS230-2505220092 전부 자동화로 내려온 이력은 있는데 mes에 입고등록이 안 되어 있습니다 전산 수동출고 요청 가능할까요? 실물은 현장에 전부 있습니다 May 28, 2025 at 7:45 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 7:47 AM, 윤경환 : 네 알겠습니다. May 28, 2025 at 7:48 AM, 이민영(Minyoung Lee) : @KIM SEYEON [김세연]_FA 피엠님 금일 3/4라인 PPAP3(24시간 가동)로 물류에 문제 없게 부탁드릴게요 May 28, 2025 at 7:48 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. May 28, 2025 at 7:52 AM, 윤성제(Yoon SungJe) : 감사합니다 May 28, 2025 at 8:02 AM, 윤경환 : 수동 출고 완료 하였습니다. May 28, 2025 at 8:10 AM, 윤성제(Yoon SungJe) : 감사합니다 May 28, 2025 at 8:20 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK031_C01 there is MC 014MC03,MC04 On Inverter Power. Thank you very much! May 28, 2025 at 8:31 AM, FACS_JaewonShin : ■ 28th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 28, 2025 at 8:38 AM, Csepi Árpád : Solved May 28, 2025 at 8:39 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 8:39 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm May 28, 2025 at 9:18 AM, SKOH2/제조-셀,모듈 출하/김병호 : @RTD/MCS team M0CNV033_M01 carrier id : U026361 CCS created a receiving command, but the destination information is not marked, and the product is not moving. Please check May 28, 2025 at 9:19 AM, Mohammad Amir : Good morning Ma'am, Checking May 28, 2025 at 9:19 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK031~33 bank anywhere, please put it in. May 28, 2025 at 9:28 AM, Mohammad Amir : We are working on this issue. Thank you very much! May 28, 2025 at 9:29 AM, Mohammad Amir : @CCS Could you please cancel the command for U026361 from your End. Form MCS it is not possible to cancel unfortunately. Thank you very much! May 28, 2025 at 9:37 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK025_C01 there is Crane fork Left collapse Detect2 error. Thank you! May 28, 2025 at 9:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 북측 모듈 도크 GF 더니지 입고중인데 입고가 되지 않아서 확인 부탁드립니다. May 28, 2025 at 9:43 AM, Mohammad Amir : @CCS After cancel please confirm I will send it to the STK. Thank you very much! May 28, 2025 at 9:51 AM, Csepi Árpád : Solved May 28, 2025 at 9:56 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 9:58 AM, FACS_Youngmin LEE : 조치되었습니다. May 28, 2025 at 11:55 AM, 윤성제(Yoon SungJe) : @MCSHello, U025477 has a history of going from M3MFA300_P05 to MOSTK033 at 09:52 today. Can you delete JOB? May 28, 2025 at 11:55 AM, Mohammad Amir : This message was deleted. May 28, 2025 at 11:56 AM, Mohammad Amir : Dear Manager, Job has been cancelled as requested ✅ Feel free to contact me again if you need any further assistance. Thank you very much! May 28, 2025 at 11:57 AM, 윤성제(Yoon SungJe) : @FA Hello, can you check the material AGV between the 3rd and 4th lines of the module? AGV number 2 ACS ALIVE ERROR. May 28, 2025 at 11:57 AM, Duna Don : Checking May 28, 2025 at 11:57 AM, 윤성제(Yoon SungJe) : Thank you always. May 28, 2025 at 11:58 AM, Mohammad Amir : You are most welcome! May 28, 2025 at 12:00 PM, Duna Don : Solved May 28, 2025 at 12:01 PM, 윤성제(Yoon SungJe) : Thank you so much. May 28, 2025 at 12:01 PM, Duna Don : You’re welcome! May 28, 2025 at 12:04 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK037_C01 there is Carne W/T in Abort (Double cargo ) error. Thank you! May 28, 2025 at 12:18 PM, Maczó Anikó : Sziasztok 2 emeleten Conveyor run time over error cv036 Stop detect error cv036 Köszönöm May 28, 2025 at 12:36 PM, Brázik János : Solved May 28, 2025 at 12:56 PM, Csepi Árpád : Solved May 28, 2025 at 1:02 PM, Mohammad Amir : @Csepi Árpád Please check M0STK023_C01 there is Crane Fork Right Collapse Detect 1 Error. Thank you! May 28, 2025 at 1:07 PM, Mohammad Amir : @FA @Brázik János Please check M0STK037_C01 there is Carne W/T in Abort (Double cargo ) error. Thank you! May 28, 2025 at 1:08 PM, Brázik János : Solved May 28, 2025 at 1:09 PM, Mohammad Amir : Thank you very much! May 28, 2025 at 1:27 PM, Brázik János : Solved May 28, 2025 at 1:57 PM, Mohammad Amir : @FA Please check M0STKC031_C01 there is MCP SMC#1 Disconnected Error. Thank you! May 28, 2025 at 2:08 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0CNV023_36_035 wrapper heater Check alarm. Thank you very much! May 28, 2025 at 2:09 PM, Szabolcs : @FA M0CNV033 lift problem. Check please. May 28, 2025 at 2:24 PM, Csepi Árpád : The equipment is currently in manual mode! May 28, 2025 at 2:24 PM, Mohammad Amir : Rendben, köszönjük az infót! May 28, 2025 at 2:25 PM, Csepi Árpád : Ok 👍🏼 May 28, 2025 at 2:29 PM, Brázik János : Solved May 28, 2025 at 2:31 PM, Mohammad Amir : Thank you very much! May 28, 2025 at 2:32 PM, Brázik János : Kész May 28, 2025 at 2:33 PM, Csepi Árpád : Solved May 28, 2025 at 2:36 PM, Sánta László : @Csepi Árpád Kérlek gyere az egyes sor BMA és Insulation cover bufferhez. Kellene egy kis segítség! Köszönöm May 28, 2025 at 2:37 PM, Sánta László : @Csepi Árpád I need help on Line1, BMA and IC buffer. May 28, 2025 at 2:37 PM, Sánta László : Thank you! May 28, 2025 at 2:39 PM, Maczó Anikó : Sziasztok 2 emeleten Cv026 waiting for the other party's response Cv004 ugyan ez Köszönöm May 28, 2025 at 3:06 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK023_C01 there is MCP 014,MC03 ,MC04 on Inverter power . Thank you very much! May 28, 2025 at 3:07 PM, Szabolcs : @FA M0CNV033 lift problem. Check please. May 28, 2025 at 3:23 PM, Mohammad Amir : @FA @Brázik János Please check M0STK022_C01 there is Crane fork left wide #2 check error. Thank you! May 28, 2025 at 3:26 PM, Csepi Árpád : Solved May 28, 2025 at 3:26 PM, Csepi Árpád : Solved May 28, 2025 at 3:26 PM, Mohammad Amir : Thank you very much! May 28, 2025 at 3:33 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0CNV036_58_023 there is work data error it is blocking materials flow. Thank you! May 28, 2025 at 3:43 PM, Csepi Árpád : The error has already been fixed! And I can see it is moving. May 28, 2025 at 3:43 PM, Mohammad Amir : Thank you very much 👍! May 28, 2025 at 3:43 PM, Brázik János : Solved May 28, 2025 at 3:43 PM, Mohammad Amir : Thank you very much! May 28, 2025 at 4:43 PM, Mohammad Amir : @Csepi Árpád Please check M4MFA300_P20 is OOS and because of this job for W000229 is pending. Thank you! May 28, 2025 at 4:56 PM, Csepi Árpád : @Mohammad Amir In coordination with production, please delete the requested work for the M4MFA300_P20 port. ID: W000229 Thank you very much. May 28, 2025 at 4:57 PM, Maczó Anikó : Sziasztok 2 emeleten Floor in position error Gf stop time over May 28, 2025 at 4:58 PM, Mohammad Amir : Job has been cancelled successfully ✅ And I have sent the carrier back to warehouse. Thank you very much! May 28, 2025 at 4:59 PM, Csepi Árpád : Solved May 28, 2025 at 5:47 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK012 P09. Please check cell buffer AGV6.Transfer is being delayed. May 28, 2025 at 5:48 PM, Muneeb Ur Rehman : Checking May 28, 2025 at 5:57 PM, 승규 (BAEK SEUNGGYU) : It's solved. May 28, 2025 at 5:59 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.28. "B" műszak, 8+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Böröczki Balázs, Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián, --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin ------------- May 28, 2025 at 6:04 PM, 승규 (BAEK SEUNGGYU) : @FA Please check cell buffer AGV8. There are no obstacles, but the detection sensor rings. May 28, 2025 at 6:05 PM, FA CS AGV David 데이비드 : Checking May 28, 2025 at 6:30 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. May 28, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : @Boromisza Zoltán please check May 28, 2025 at 6:42 PM, Gerbovits Kevin : Going May 28, 2025 at 6:47 PM, FACS_TaehyeongJin : Solved May 28, 2025 at 6:52 PM, Gerbovits Kevin : Solved May 28, 2025 at 7:01 PM, Niki (Modul) : Sziasztok! @Boromisza Zoltán @Gerbovits Kevin CV040DIV stop error CV037 time over error May 28, 2025 at 7:04 PM, Boromisza Zoltán : Úton May 28, 2025 at 7:19 PM, Boromisza Zoltán : Kész May 28, 2025 at 7:27 PM, Horváth Adriàn : @Gerbovits Kevin @Boromisza Zoltán line 3-4 között alapanyag raki cv4 diverter probléma. Check pls May 28, 2025 at 7:31 PM, Boromisza Zoltán : Megyünk May 28, 2025 at 7:37 PM, Boromisza Zoltán : Kész May 28, 2025 at 9:26 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. May 28, 2025 at 9:30 PM, Gerbovits Kevin : Going May 28, 2025 at 9:45 PM, Boromisza Zoltán : Solved May 28, 2025 at 10:11 PM, VK (mcs) : @FA Please check M0STK032 and M0STK021 Both have a Crane unload time-out error.thx May 28, 2025 at 10:12 PM, Boromisza Zoltán : Going May 28, 2025 at 10:18 PM, Gerbovits Kevin : Solved May 28, 2025 at 10:49 PM, Niki (Modul) : @Boromisza Zoltán hátsó raktárban gond van! De nem jelzi ki a monitor May 28, 2025 at 11:16 PM, Boromisza Zoltán : Megyünk May 28, 2025 at 11:41 PM, Boromisza Zoltán : Kész May 29, 2025 at 12:27 AM May 29, 2025 at 12:27 AM, VK (mcs) : @FA Please check M0STK031 Crane SRC disconnected error. May 29, 2025 at 12:29 AM, Gerbovits Kevin : Going May 29, 2025 at 12:59 AM, Gerbovits Kevin : Solved May 29, 2025 at 1:46 AM, Niki (Modul) : @Boromisza Zoltán hátsó raktárban gond van May 29, 2025 at 1:47 AM, Boromisza Zoltán : Úton May 29, 2025 at 3:28 AM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin gyertek pls line 4 Uppercase gantryhez May 29, 2025 at 3:30 AM, Boromisza Zoltán : Megyünk May 29, 2025 at 3:31 AM, Horváth Adriàn : Line 3 AGV ACS emergency alarm check please May 29, 2025 at 3:32 AM, FA CS AGV David 데이비드 : Coming May 29, 2025 at 3:38 AM, FA CS AGV David 데이비드 : Solved May 29, 2025 at 3:44 AM, Boromisza Zoltán : Kész May 29, 2025 at 4:38 AM, Boromisza Zoltán : @VK (mcs) I would like to ask for help Pallet number PS22A-250520096 should be returned to the warehouse #AGV1 a M4MFA300 P16 May 29, 2025 at 4:39 AM, VK (mcs) : Checking May 29, 2025 at 4:40 AM, Boromisza Zoltán : Thank May 29, 2025 at 4:45 AM, VK (mcs) : @김지수PM(Gyuri)_FA Can you please cancel current job for AGV#1 Module assembly line 3 May 29, 2025 at 4:46 AM, 김지수PM(Gyuri)_FA : Takes some time cause has to go there(on site) May 29, 2025 at 5:04 AM, VK (mcs) : Job created to STK25 May 29, 2025 at 5:06 AM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. May 29, 2025 at 5:06 AM, Boromisza Zoltán : Thank May 29, 2025 at 5:40 AM, Niki (Modul) : @Boromisza Zoltán hátsó raktárnál gond van May 29, 2025 at 5:42 AM, Boromisza Zoltán : Úton May 29, 2025 at 5:54 AM, Boromisza Zoltán : Kész May 29, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 29, 2025 at 6:36 AM, Maczó Anikó : Sziasztok a 2.-dik emeleten a raktárnál a conveyor nem megy a ki jövö anyagért de hibát nem jelez meg tudnátok nézni . Köszönöm May 29, 2025 at 6:39 AM, Csepi Árpád : @ mcs Hi! There is a pending task on port “M0STK011_P06” and it is not progressing. ID: Z100095 May 29, 2025 at 6:41 AM, Muneeb Ur Rehman : @Mohammad Amir please check this carrier ID May 29, 2025 at 6:41 AM, Mohammad Amir : Good morning, I am checking! May 29, 2025 at 6:50 AM, Mohammad Amir : Job was cancelled at 6:18 by Operator that's why it was not moving. I have created a new command for it to store in warehouse ✅. However currently port M0STK011_P06 is OOS that's why it not moving. Please check P06 port there is Carrier Data received timeout error. Thank you very much! May 29, 2025 at 6:53 AM, Mohammad Amir : @FA @Brázik János Please check M0STK026_C01 there is Crane Fork Right Collapse Detect Error. Several jobs are waiting because of this issue. Thank you very much! May 29, 2025 at 6:54 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA and fa technicians could you check it May 29, 2025 at 6:56 AM, Mr.Miti (미티) FA : They are on it May 29, 2025 at 6:58 AM, Maczó Anikó : Sziasztok 2 emeleten 83001 conveyor nem hoz anyagot de hiba nincs . May 29, 2025 at 6:59 AM, KIM SEYEON [김세연]_FA : 👍 May 29, 2025 at 7:01 AM, Mohammad Amir : @Manufacturing Please check several jobs are created for destination M0CNV033_M02 , however it is Input ports that's why these jobs can not be completed hence in pending state and not moving. All these jobs are created by manually. For your information M03/M04 are Out put ports . Please let me know you would like to receive Materials at M03? Thank you very much! May 29, 2025 at 7:01 AM, KIM SEYEON [김세연]_FA : @이민영(Minyoung Lee) 피엠님 PPAP3는 종료인가요? May 29, 2025 at 7:03 AM, Tóth Gyula : Yes May 29, 2025 at 7:04 AM, 이민영(Minyoung Lee) : 네 6시로 종료되었습니다. 덕분에 잘 진행되었습니다. 감사합니다 May 29, 2025 at 7:08 AM, Mohammad Amir : I have cancelled the current materials unexecutable transfer jobs which have destinations to M0CNV033_M02. Now these materials are free and you can request at M0CNV033_M03(Output port) and materials will start to arrive. Please let me know if you need any further assistance. I am monitoring Thank you very much! May 29, 2025 at 7:10 AM, Tóth Gyula : We are using the M04 port. May 29, 2025 at 7:10 AM, Mohammad Amir : Sure ,M04 is also Out put port. You can request materials there as well without any issue. I am monitoring. Thank you very much! May 29, 2025 at 7:12 AM, Mohammad Amir : Issue has been resolved ✅. Materials have started to arrive at M04. Thank you very much! May 29, 2025 at 7:23 AM, Csepi Árpád : @AGV-CS I need help! AGV 15 cannot be switched to automatic mode! P06 port Cell 011 warehouse May 29, 2025 at 7:23 AM, Muneeb Ur Rehman : I’m checking May 29, 2025 at 7:24 AM, Muneeb Ur Rehman : It is now on auto mode May 29, 2025 at 7:27 AM, Csepi Árpád : Solved May 29, 2025 at 7:30 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 7:35 AM, Mohammad Amir : @Csepi Árpád @FA Please check M1MFA300_P30 and M4MFA300_P29 are OOS that's why two jobs are pending for while. Thank you very much! May 29, 2025 at 7:42 AM, Csepi Árpád : @Mohammad Amir Storage has been completed in the M0STK-012 warehouse! ID: Z100095 May 29, 2025 at 7:42 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 7:48 AM, Csepi Árpád : Fordítás angolra: Hi! Is M1MFA300 P30 the location of the error? May 29, 2025 at 7:50 AM, Csepi Árpád : Fordítás angolra: Please delete the work instruction for the M4MFA300 P29 port! The M4MFA300 line is in manual mode. May 29, 2025 at 7:50 AM, Mohammad Amir : Yes . May 29, 2025 at 7:51 AM, Csepi Árpád : Fordítás angolra: I am checking now. May 29, 2025 at 7:54 AM, Mohammad Amir : Job has been cancelled as requested ✅. I have sent the carrier to it's source warehouse. Feel free to contact if you need any assistance. Thank you very much! May 29, 2025 at 7:56 AM, Csepi Árpád : Fordítás angolra: The M1MFA300 P30 port is operating in automatic mode! May 29, 2025 at 7:57 AM, Mohammad Amir : Thank you very much. Now job has been normalized ✅. May 29, 2025 at 7:58 AM, Mohammad Amir : @FA Are you checking this issue,STK is still in error. Thank you very much! May 29, 2025 at 7:59 AM, Mohammad Amir : M0STK026*** May 29, 2025 at 8:00 AM, Csepi Árpád : Fordítás angolra: I am working on it right now. May 29, 2025 at 8:00 AM, Mohammad Amir : Nagyon Köszönom szepen 🙏 May 29, 2025 at 8:06 AM, Csepi Árpád : Solved May 29, 2025 at 8:15 AM, 윤성제(Yoon SungJe) : @이민호 MINHO @윤경환 안녕하세요 pm님 조장님 3라인 BMA PS230-2505150071 UPPER CASE PS22A-2505220063 4라인 BMA PS230-2505230150 END PLATE PF221-2505220015 자동화로 내려온 이력 있는데 전부 미 입고상태입니다 수동출고 가능하실까요? 그리고 4라인 UPPER CASE PS22A-2505200096 05:02분 경 자동화로 내려왔다가 포트로 들어가지않고 AGV통해 05:48분 반송 된 이력있습니다 전산 입고잡혀서 수동출고 필요합니다 감사합니다 May 29, 2025 at 8:15 AM, 윤경환 : 지금 해드리겠습니다. May 29, 2025 at 8:24 AM, 윤경환 : 3라인 4라인 전산 출고 처리 다 했는데, 마지막 어퍼는 전산 출고 처리를 해달라고 하시는 건가요? 아니면 자동화 창고에 들어가서 수동으로 빼달라고 하시는 건가요? May 29, 2025 at 8:25 AM, 윤성제(Yoon SungJe) : 마지막 4라인 어퍼는 pm님이 mes로 회수처리 하신다고 합니다 수동출고 안해주셔도 될 것 같습니다 May 29, 2025 at 8:25 AM, Bozó Gyula : Sziasztok! Segítséget szeretnék kérni az OQC porthoz!! Köszönöm! May 29, 2025 at 8:28 AM, FACS_JaewonShin : ■ 29th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 29, 2025 at 8:37 AM, 윤성제(Yoon SungJe) : @윤경환 조장님 정말 죄송합니다.. 1라인 BMA PS230-2502260017 LOWER CASE PF220-2505220196 수동출고 부탁드립니다 실물 현장에 있습니다 May 29, 2025 at 8:38 AM, 윤경환 : 네 지금 해드리겠습니다. May 29, 2025 at 8:39 AM, Mohammad Amir : @FA @Brázik János Please check M0STK031_C01 there is Crane SRC Disconnected Error. Two jobs are waiting because of this issue. Thank you ! May 29, 2025 at 8:45 AM, Brázik János : Solved May 29, 2025 at 8:45 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 8:55 AM, 윤경환 : 출고 완려 하였습니다. May 29, 2025 at 8:55 AM, 윤경환 : *완료 May 29, 2025 at 8:57 AM, Csepi Árpád : @Mohammad Amir Please help! There is a pending task! M0OQC001_P01 ID: U025736 May 29, 2025 at 8:58 AM, Mohammad Amir : Sure ,I am checking. May 29, 2025 at 8:59 AM, Mohammad Amir : Issue has been resolved ✅. Please press UR again from P01. I am monitoring. Thank you very much! May 29, 2025 at 9:01 AM, Csepi Árpád : Köszönöm szépen! May 29, 2025 at 9:01 AM, Mohammad Amir : Szivesen! May 29, 2025 at 9:04 AM, Mohammad Amir : UR received successfully at 9:03. Job has been created ✅ I am monitoring for smooth delivery of the material. Thank you very much! May 29, 2025 at 9:04 AM, 윤성제(Yoon SungJe) : 감사합니다 May 29, 2025 at 9:05 AM, Csepi Árpád : All right! I thank you for your work. May 29, 2025 at 9:05 AM, 윤성제(Yoon SungJe) : @FA Hello, can you check the light curtains of M4MFA300_P33? May 29, 2025 at 9:05 AM, Mohammad Amir : You are welcome! Feel free to contact me again if you face any further issues. May 29, 2025 at 9:12 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK028_C01 there is Crane Fork Right Collapse Detect 2 alarm. One job is pending because of it. Thank you very much! May 29, 2025 at 9:13 AM, Mohammad Amir : @Brázik János @FA Please check M0STK026_C01 there is Crane Fork Right Collapse Detect 2 alarm. Thank you very much! May 29, 2025 at 9:14 AM, Roland : Hello. M0CNV022 - CV021 Div pallet detect and work data error. Can you check it, please? Thank you May 29, 2025 at 9:20 AM, Mohammad Amir : Update:- Carrier U025736 has finally stored in M0STK031(0101805 )at 9:16. ✅ Thank you very much! May 29, 2025 at 9:36 AM, 윤경환 : @ MCS/RTD Hello. Please move the 2 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. (PS22A-2505260032,35) May 29, 2025 at 9:36 AM, Mohammad Amir : Good morning Sir, Sure,I am working on it. Thank you very much! May 29, 2025 at 9:37 AM, Brázik János : Solved May 29, 2025 at 9:37 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 9:37 AM, Brázik János : Solved May 29, 2025 at 9:38 AM, 윤경환 : Thank you.👍 May 29, 2025 at 9:40 AM, Mohammad Amir : Job has been created successfully ✅. Carriers have started to move to it's destination. I am monitoring. Thank you very much! May 29, 2025 at 9:45 AM, Maczó Anikó : Sziasztok 2 emeleten a 83020-as raktárba nem megy be az anyag hibát nem jelez . May 29, 2025 at 9:46 AM, Maczó Anikó : Be ment bocsi de eddig ott állt 😁 May 29, 2025 at 9:47 AM, Csepi Árpád : Türelem! 😁👌 May 29, 2025 at 9:53 AM, Mohammad Amir : Sir, Update :- Both Carriers (PS22A-2505260032,35) have successfully arrived at M0CNV021_M03 ✅. Please let me know if you need any further assistance. Thank you very much! May 29, 2025 at 9:57 AM, 윤경환 : Thank you for your Support.👍 May 29, 2025 at 9:57 AM, Mohammad Amir : You are most welcome Sir. May 29, 2025 at 9:58 AM, Maczó Anikó : Nálam türelmesebb ember nincs 😆😆😆 May 29, 2025 at 10:33 AM, Roland : Please check M0CNV022-CV015 Work data error, please, Thank you! May 29, 2025 at 10:39 AM, Mohammad Amir : @Csepi Árpád Please check M0STK022_P02 there is Interface Error. Thank you very much! May 29, 2025 at 10:42 AM, Mohammad Amir : @Brázik János Please check M0STK031_C01 there is MCP SMC#1 Disconnected Error. Some jobs are Alternated. Thank you very much! May 29, 2025 at 10:47 AM, Brázik János : Solved May 29, 2025 at 10:51 AM, Alexandra : 2f cv021 stop detect error May 29, 2025 at 11:01 AM, Csepi Árpád : Solved May 29, 2025 at 11:11 AM, Brázik János : Kész May 29, 2025 at 11:11 AM, Brázik János : Solved May 29, 2025 at 11:12 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 12:25 PM, Mohammad Amir : @FA @Brázik János Please check M0STK031_C01 there is Crane SRC Disconnected Error. One job is waiting because of this issue. Thank you ! May 29, 2025 at 12:26 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0CNV032_P01 there is Stop detect error and it has blocked few jobs. Thank you very much! May 29, 2025 at 12:32 PM, Brázik János : Solved May 29, 2025 at 12:32 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 12:40 PM, Csepi Árpád : Solved May 29, 2025 at 12:41 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 1:18 PM, Mohammad Amir : @Brázik János @FA Please check M0STK021_C01 there is Crane Fork Right Collapse Detect 1 alarm. Thank you very much! May 29, 2025 at 1:22 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK023_C01 there is Crane Fork Right Collapse Detect 1 alarm. Several jobs are pending. Thank you very much! May 29, 2025 at 1:30 PM, Brázik János : Solved May 29, 2025 at 1:30 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 1:30 PM, Brázik János : Solved May 29, 2025 at 1:32 PM, Mohammad Amir : @Brázik János @FA Please check M0CNV021_P11_BP01 there is Stop detect error and it has blocked two jobs . Thank you very much! May 29, 2025 at 1:35 PM, Csepi Árpád : Solved May 29, 2025 at 1:35 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 1:47 PM, Farkas Kevin : I'd like to ask for FA support at Module Line 1 May 29, 2025 at 1:48 PM, Farkas Kevin : UPR Case loading May 29, 2025 at 1:57 PM, Mohammad Amir : @FA @Brázik János Please check M0STK031_C01 there is Crane SRC Disconnected Error. One job is waiting because of this issue. Thank you ! May 29, 2025 at 2:10 PM, Brázik János : Solved May 29, 2025 at 2:12 PM, 승규 (BAEK SEUNGGYU) invited 손병훈. May 29, 2025 at 2:12 PM, 승규 (BAEK SEUNGGYU) : . May 29, 2025 at 2:13 PM, 손병훈 : 안녕하세요 7라인 로워케이스 투입부 무언정지 발생했습니다. plc스텝상 gripper forward 인데 그립을 안하고 있습니다. 확인 부탁드립니다 May 29, 2025 at 2:19 PM, 손병훈 : 기다리는중에 타임오버났습니다 May 29, 2025 at 2:19 PM, 김지형(Jihyung Kim) : Line7 End plate gantry Gripper clamp tran not detect alarm Please check May 29, 2025 at 2:21 PM, FACS_Youngmin LEE : 이동하겠습니다. May 29, 2025 at 2:50 PM, FACS_Youngmin LEE : 조치되었습니다. May 29, 2025 at 2:50 PM, 손병훈 : 감사합니다 May 29, 2025 at 3:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 북쪽 모듈 도크 GF 입구포트에서 더니지 입고 작업중인데 CCS에서 잡생성이 안되고 있어 확인 부탁드립니다 May 29, 2025 at 3:35 PM, FACS_Hyeongi Son : 이동하겠습니다 May 29, 2025 at 3:41 PM, FACS_Hyeongi Son : @MCS Hello Can you move this product? -U026787 M0CNV033_M02 -> M0STK033_0201504 May 29, 2025 at 3:41 PM, Mohammad Amir : Hello, I am checking. Thank you very much! May 29, 2025 at 3:43 PM, Mohammad Amir : Issue has been resolved ✅ Carrier has started to move . I am monitoring for smooth delivery of the materials. Thank you very much! May 29, 2025 at 3:44 PM, FACS_Hyeongi Son : Thank you very much:) May 29, 2025 at 3:44 PM, FACS_Hyeongi Son : 자재 반송중입니다 May 29, 2025 at 3:44 PM, Mohammad Amir : You are welcome! May 29, 2025 at 3:54 PM, Mohammad Amir : Update :- For your information carrier U026787 has been successfully stored in M0STK033 at 15:48. ✅ Thank you very much! May 29, 2025 at 4:20 PM, 손병훈 : 7라인 로워 갠트리 포트2번 /2단/ 트레이2번 포지션에서 그립 후 상승 회피시 상승회피 x축 방향이 반대로 들어가있는거같습니다. 트레이1번쪽 (+x 방향)으로 밀고 트레이끼리 마찰하면서 올라갑니다. 확인 부탁드립니다. May 29, 2025 at 4:21 PM, KIM SEYEON [김세연]_FA : @FACS_Hyeongi Son 확인 부탁드립니다. May 29, 2025 at 4:22 PM, FACS_Hyeongi Son : 이동하겠습미자 May 29, 2025 at 4:59 PM, 승규 (BAEK SEUNGGYU) : @FA 1F AGV No. 4 Charger bar detect error for discharging finished products. Please check it. May 29, 2025 at 4:59 PM, Muneeb Ur Rehman : Checking May 29, 2025 at 5:41 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK012 P09. Please check cell buffer AGV8. I got caught in the facility while putting it in. May 29, 2025 at 5:41 PM, Duna Don : Checking May 29, 2025 at 5:45 PM, Mohammad Amir : @FA @Brázik János Please check M0STK023_C01 there is MCP 0140MC03,MC04 on inverter power error. Thank you May 29, 2025 at 5:50 PM, Brázik János : Solved May 29, 2025 at 5:50 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 6:04 PM, Mohammad Amir : This message was deleted. May 29, 2025 at 6:04 PM, Mohammad Amir : @FA Please check M0STK031_C01 there is MCP 0140MC03,MC04 on inverter power error again. Thank you May 29, 2025 at 6:04 PM, Mohammad Amir : @FA Please check M0STK023_C01 there is crane fork right collapsed again. Thank you May 29, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.29. "B" műszak, 9+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Böröczki Balázs --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(1): 김지수 May 29, 2025 at 6:19 PM, Mohammad Amir : @Boromisza Zoltán Please check these errors still exists , several jobs are pending. Thank you very much! May 29, 2025 at 6:30 PM, Boromisza Zoltán : Going May 29, 2025 at 6:40 PM, Boromisza Zoltán : Solved May 29, 2025 at 6:41 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 6:57 PM, Shakir (MCS) : @FA Please check M0CNV023_RTV01 there is RTV car return to origin Error. Thank you May 29, 2025 at 6:58 PM, Boromisza Zoltán : Going May 29, 2025 at 7:06 PM, Niki (Modul) : Sziasztok! @Boromisza Zoltán hátsó raktárnál gond van. May 29, 2025 at 7:07 PM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin Line 3 final. AGV 13 ACS alive alarm. Check please May 29, 2025 at 7:08 PM, Boromisza Zoltán : Megyek May 29, 2025 at 7:08 PM, Boromisza Zoltán : Úton May 29, 2025 at 7:11 PM, Boromisza Zoltán : Kész May 29, 2025 at 7:12 PM, Boromisza Zoltán : Solved May 29, 2025 at 7:24 PM, Boromisza Zoltán : Kész May 29, 2025 at 9:07 PM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin Line 3 nem kap üres dunnaget. Pls check May 29, 2025 at 9:07 PM, Boromisza Zoltán : Megyünk May 29, 2025 at 9:22 PM, Boromisza Zoltán : Kész May 29, 2025 at 9:54 PM, Niki (Modul) : @Boromisza Zoltán gáz van a fóliázógéppel May 29, 2025 at 9:54 PM, Boromisza Zoltán : Megyünk May 29, 2025 at 10:13 PM, Boromisza Zoltán : Kész May 30, 2025 at 12:52 AM May 30, 2025 at 12:52 AM, Shakir (MCS) : @FA Please check M0STK023_C01, Crane fork left wide error. M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 30, 2025 at 12:55 AM, Boromisza Zoltán : Boeing 😆😆 May 30, 2025 at 1:15 AM, Gerbovits Kevin : Solved May 30, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (2): Martina Dávid, Kiss Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 30, 2025 at 6:19 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.30 Time:06:00~18:00 Jeong woojun May 30, 2025 at 6:31 AM, FA-CS-AGV-Masoud : @fa Please check M0STK12_P10 May 30, 2025 at 6:39 AM, N.Gábor F.A. : Just a moment May 30, 2025 at 7:35 AM, duzzaman Md (MCS) : @FA Good morning! Please check M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 30, 2025 at 7:40 AM, 윤성제(Yoon SungJe) : @FA Hello, AGV is waiting in the first row in front of the module GF line 5. The work seems to be twisted. Can you check it? May 30, 2025 at 7:41 AM, FA-CS-AGV-Masoud : Yes sir im here to check thanks May 30, 2025 at 7:43 AM, FA-CS-AGV-Masoud : Solved May 30, 2025 at 7:44 AM, N.Gábor F.A. : Solved May 30, 2025 at 7:49 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please Please check the box packing . The port is occupied, and two AGVs are waiting to deliver the pallet. This has caused delays in the rest of the jobs. May 30, 2025 at 7:49 AM, N.Gábor F.A. : Just a moment May 30, 2025 at 8:11 AM, FACS_JaewonShin : ■ 30th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 30, 2025 at 8:13 AM, 윤성제(Yoon SungJe) : @윤경환 안녕하세요 조장님 전일과 동일한 현상으로 3라인 Insulation cover PS210-2504040116 입고 안된 채 자동화로 내려왔습니다 수동출고 부탁드립니다 May 30, 2025 at 8:15 AM, 윤경환 : 출고 처리 완료 되었습니다. May 30, 2025 at 8:16 AM, 윤성제(Yoon SungJe) : 매번 감사합니다.. May 30, 2025 at 8:49 AM, Sazzad Bhai SKon : @Acs @Duna Don Could you please check AgV M0MGV032_VC03 (1F). It has a pending job for 7 line for a long time. May 30, 2025 at 8:49 AM, FA-CS-AGV-Masoud : Coming May 30, 2025 at 8:55 AM, FA-CS-AGV-Masoud : The AGV had shut down because the port was inactive, which caused it to remain in pending mode . It has now returned to operation and now the pallet delivered. May 30, 2025 at 8:59 AM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 there is MCP 0140MC03,MC04 on inverter power error. Thank you May 30, 2025 at 8:59 AM, N.Gábor F.A. : Solved 🫡 May 30, 2025 at 9:50 AM, 김지형(Jihyung Kim) : 7라인 lwr case gantry Idle 상황인데 경광등 파란색 초록색 점등되어있습니다 점검요청드립니다 May 30, 2025 at 9:53 AM, FACS_Youngmin LEE : 이동하겠습니다. May 30, 2025 at 10:25 AM, FACS_Youngmin LEE : 조치되었습니다. May 30, 2025 at 10:52 AM, N.Gábor F.A. : @FA-CS-AGV-Masoud @Duna Don Hello, can you come to Modul 1F Line7 End product? May 30, 2025 at 10:53 AM, FA-CS-AGV-Masoud : Sure coming May 30, 2025 at 10:53 AM, N.Gábor F.A. : Thank you May 30, 2025 at 11:07 AM, FA-CS-AGV-Masoud : AGV successfully completed unloading tray . The issue has been resolved. May 30, 2025 at 11:09 AM, N.Gábor F.A. : Thank you May 30, 2025 at 12:01 PM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 there is Carne W/T in Abort (Double cargo ) error. Thank you! May 30, 2025 at 12:15 PM, N.Gábor F.A. : Solved May 30, 2025 at 1:17 PM, 김지형(Jihyung Kim) : 7라인 lwr case gantry Gripper tray overrun detect error 입니다 확인부탁드립니다 May 30, 2025 at 1:17 PM, FACS_Youngmin LEE : 이동하겠습니다. May 30, 2025 at 1:28 PM, duzzaman Md (MCS) : @FA @N.Gábor F.A. M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 30, 2025 at 1:29 PM, Roland : Hello, Please check M0CNV022 - CV15 Work data error. Thank you May 30, 2025 at 1:40 PM, N.Gábor F.A. : Solved May 30, 2025 at 1:52 PM, N.Gábor F.A. : Solved May 30, 2025 at 2:30 PM, Roland : Sziasztok. Megneznetek a M0CNV022-es raktar CV16os portjat legyszives? Nem akarnak jonni kifele az anyagok. Koszonom May 30, 2025 at 2:30 PM, N.Gábor F.A. : Megyek May 30, 2025 at 4:09 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK031 bank 기동 정지 상태입니다 확인 부탁드립니다 May 30, 2025 at 4:09 PM, FACS_Youngmin LEE : 이동하겠습니다. May 30, 2025 at 4:27 PM, FACS_Youngmin LEE : 조치되었습니다. May 30, 2025 at 4:33 PM, Sazzad Bhai SKon : @FA M0STK031,32,33 are all 97% full. This is also their HWM. Please consider it May 30, 2025 at 4:43 PM, Szabolcs : @FA M0STK031 problem. Check please. May 30, 2025 at 4:57 PM, N.Gábor F.A. : Done May 30, 2025 at 6:53 PM, Shakir (MCS) : @FA M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 30, 2025 at 6:54 PM, Shakir (MCS) : @FA Please check M0CNV023_P21 RUN time over error. Thank you May 30, 2025 at 7:07 PM, Sarvajcz Ferenc FA : Solved May 30, 2025 at 7:10 PM, Sarvajcz Ferenc FA : Next... May 30, 2025 at 7:23 PM, Sarvajcz Ferenc FA : I don't see any error.. May 30, 2025 at 7:24 PM, Shakir (MCS) : Solved thank you May 30, 2025 at 7:24 PM, Sarvajcz Ferenc FA : Ok.. May 30, 2025 at 8:24 PM, Sarvajcz Ferenc FA : M0stk 21,23 inverter tripping too often. May 30, 2025 at 9:08 PM, Sarvajcz Ferenc FA : @Shakir (MCS) Please check the Modul m3 mfa 300 tr- op#1 end plate unloading area because this error message is: tray block placement order NG error. Thank you May 30, 2025 at 9:11 PM, Shakir (MCS) : Please provide me port id, I can check May 30, 2025 at 9:12 PM, Sarvajcz Ferenc FA : Modul ,line 3, Transfer -OP#1 May 30, 2025 at 9:12 PM, Shakir (MCS) : Please check, Again Thank you May 30, 2025 at 9:14 PM, Sarvajcz Ferenc FA : It is highly likely that the unloading pallet has moved. During the inspection, the last point has been experiencing the specified error since 20:42. May 30, 2025 at 9:19 PM, FA CS AGV David 데이비드 : What's the port ID please? May 30, 2025 at 9:32 PM, Sarvajcz Ferenc FA : The problem is being resolved. May 30, 2025 at 9:52 PM, Shakir (MCS) : @FA M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 30, 2025 at 9:53 PM, Sarvajcz Ferenc FA : I 'll try.. May 30, 2025 at 10:03 PM, FACS_Hyeongi Son : It works normally now The reason is that the order of the tray is bad May 30, 2025 at 10:06 PM, Sarvajcz Ferenc FA : Ok. Thanks to you! May 30, 2025 at 10:46 PM, Sarvajcz Ferenc FA : @Shakir (MCS) Hello, please check why the module 3 line BMA does not come with material? Unfortunately, I cannot enter the kiosk, so I cannot check it. Thank you May 30, 2025 at 10:52 PM, Shakir (MCS) : Carrier is on the way to the port M3MFA300_P28. May 30, 2025 at 10:53 PM, Sarvajcz Ferenc FA : Okey. Super! Thx again. May 31, 2025 at 12:20 AM May 31, 2025 at 12:20 AM, Shakir (MCS) : @FA M0STK031_C01 , MCP SMC1 Disconnected error Thank you May 31, 2025 at 12:21 AM, Shakir (MCS) : Also M0STK026_C01 crane shelf In abort Double cargo error May 31, 2025 at 12:21 AM, FA CS AGV David 데이비드 : It's being worked on atm May 31, 2025 at 1:59 AM, András : Sziasztok 2.emeletre kaptunk egy üres paletát A 2-es csomagoló gépnél van May 31, 2025 at 2:00 AM, Sarvajcz Ferenc FA : Igen, tudom..kellene csak nem tudom hogyan.. May 31, 2025 at 2:00 AM, András : Tovább küldjem ? May 31, 2025 at 2:02 AM, Sarvajcz Ferenc FA : Nem tudom ,most intézem.. May 31, 2025 at 2:02 AM, András : Rendben May 31, 2025 at 2:14 AM, FACS_Hyeongi Son : @Shakir (MCS) Can you erase the existing data for PF221-2505200011 and create a new data on M3MFA300_P28? May 31, 2025 at 2:15 AM, FACS_Hyeongi Son : *P27 May 31, 2025 at 2:16 AM, Shakir (MCS) : What is the current location of the carrrier May 31, 2025 at 2:18 AM, Shakir (MCS) : @FA Please check M0CNV023_35_028 Wrapper sealing not detected error. Thank you May 31, 2025 at 2:20 AM, FACS_Hyeongi Son : Current location M3MFA300_P27 May 31, 2025 at 2:22 AM, Shakir (MCS) : Unfortunately, we are not allowed to create job from gantry. May 31, 2025 at 2:27 AM, Shakir (MCS) : @FA M0STK 023_c01 MCP 2F OP2 light curtain detect error. May 31, 2025 at 2:41 AM, Sarvajcz Ferenc FA : What is it " 2F"? May 31, 2025 at 2:41 AM, Shakir (MCS) : 2 floor May 31, 2025 at 2:42 AM, Sarvajcz Ferenc FA : Ok.. May 31, 2025 at 3:02 AM, Sarvajcz Ferenc FA : Is the error still there? Do you see it? May 31, 2025 at 3:03 AM, Shakir (MCS) : Yes still error May 31, 2025 at 3:03 AM, Sarvajcz Ferenc FA : Ok.. May 31, 2025 at 3:10 AM, Sarvajcz Ferenc FA : I haven't found the error yet, do you still see it? May 31, 2025 at 3:12 AM, Shakir (MCS) : Yes, But different error this time ‘Crane fork left wide#1 check error. May 31, 2025 at 3:13 AM, Sarvajcz Ferenc FA : ..I've already visited Kenya, but I can't find it..there was another mistake in between.. May 31, 2025 at 3:43 AM, Sarvajcz Ferenc FA : Solved. May 31, 2025 at 3:43 AM, Sarvajcz Ferenc FA : Its okey? What seeing? May 31, 2025 at 3:44 AM, Shakir (MCS) : Now all clear, Thank you May 31, 2025 at 5:56 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 31, 2025 at 6:06 AM, Mohammad Amir : @FA @F.A.Balazs Please check M0STK031_C01 , MCP SMC1 Disconnected error. Thank you May 31, 2025 at 6:08 AM, N.Gábor F.A. : Solved May 31, 2025 at 6:11 AM, Mohammad Amir : @FA @N.Gábor F.A. Please also check M0STK012 it is OOS and several jobs are waiting. Thank you very much! May 31, 2025 at 6:13 AM, N.Gábor F.A. : Checking May 31, 2025 at 6:31 AM, Simon Attila : Please check second floor CV027 Slow detect error Thank you May 31, 2025 at 6:40 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK031_C01 there is Crane SRC Disconnected Error. One job is waiting because of this issue. Thank you ! May 31, 2025 at 6:44 AM, N.Gábor F.A. : Solved May 31, 2025 at 6:44 AM, N.Gábor F.A. : Checking May 31, 2025 at 6:46 AM, Mohammad Amir : Thank you very much! May 31, 2025 at 7:02 AM, N.Gábor F.A. : Solved May 31, 2025 at 7:02 AM, Mohammad Amir : Thank you very much! May 31, 2025 at 7:05 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.31 Time:06:00~18:00 Jeong woojun May 31, 2025 at 7:13 AM, N.Gábor F.A. : @MCS Hello Could you create the job for this palette? Z100435 Don't have a job and just waiting in this port M0STK011_P06 May 31, 2025 at 7:13 AM, Mohammad Amir : Hello, Checking May 31, 2025 at 7:13 AM, N.Gábor F.A. : Thank you May 31, 2025 at 7:17 AM, N.Gábor F.A. : Oh, I apologize, the palette's job has been showed in the meantime. May 31, 2025 at 7:18 AM, Mohammad Amir : Job has been created successfully already ✅. Everything is good from MCS RTD side ✅. Carrier is waiting to be picked by the cranes. Could you please check M0STK011_C02 ,it is nit performing tasks for last 2 hours ,if it will be also active jobs will be executed faster. Thank you very much! May 31, 2025 at 7:19 AM, N.Gábor F.A. : Thank you very much May 31, 2025 at 7:19 AM, Mohammad Amir : You are welcome. May 31, 2025 at 7:48 AM, Mohammad Amir : This message was deleted. May 31, 2025 at 7:48 AM, Mohammad Amir : @N.Gábor F.A. Update :- Carrier has been successfully stored in M0STK011_0100112 at 7:40. ✅ Thank you very much! May 31, 2025 at 7:50 AM, N.Gábor F.A. : Thank you very much May 31, 2025 at 7:50 AM, Mohammad Amir : You are welcome! May 31, 2025 at 7:56 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK031_C01 there is MCP SMC#1 Disconnected error. Thank you very much! May 31, 2025 at 7:57 AM, Mohammad Amir : @FA Please check M0CNV023_82_003 there is Work Data Error. Thank you very much! May 31, 2025 at 8:22 AM, Mohammad Amir : @N.Gábor F.A. Please check this issue now there is Crane PLC error. Thank you! May 31, 2025 at 8:23 AM, N.Gábor F.A. : Checking May 31, 2025 at 8:23 AM, Mohammad Amir : This issue still exists @FA please check this issue it exists since 7:52 and because of this materials recovery is affected. Thank you very much! May 31, 2025 at 8:27 AM, N.Gábor F.A. : Checking May 31, 2025 at 8:44 AM, N.Gábor F.A. : Solved May 31, 2025 at 8:44 AM, Mohammad Amir : Thank you very much 🙏 May 31, 2025 at 9:24 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK031_C01 is OOS. Thank you very much! May 31, 2025 at 9:24 AM, N.Gábor F.A. : Checking May 31, 2025 at 9:46 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV031_RTV01 there is Interface Error and because of this several jobs are getting delayed. Thank you! May 31, 2025 at 9:59 AM, N.Gábor F.A. : Solved May 31, 2025 at 9:59 AM, Mohammad Amir : Thank you very much! May 31, 2025 at 10:16 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you ! May 31, 2025 at 10:17 AM, N.Gábor F.A. : Checking May 31, 2025 at 10:37 AM, N.Gábor F.A. : Solved May 31, 2025 at 10:37 AM, Mohammad Amir : Thank you very much! May 31, 2025 at 1:08 PM, Mohammad Amir : @N.Gábor F.A. Please check M1MFA300_P21 it is OOS that's why one job is pending. Thank you very much! May 31, 2025 at 1:15 PM, N.Gábor F.A. : Checking May 31, 2025 at 1:21 PM, N.Gábor F.A. : Please delete the job This port is a packaging paper waste port, don't need an unload May 31, 2025 at 1:22 PM, Mohammad Amir : Job has been cancelled successfully as requested ✅. Thank you very much! May 31, 2025 at 1:22 PM, N.Gábor F.A. : Thank you May 31, 2025 at 1:23 PM, Mohammad Amir : You are welcome! May 31, 2025 at 1:40 PM, Mohammad Amir : @FA Please check M0STK031_C01 there is MCP SMC#1 Disconnected error. Thank you very much! May 31, 2025 at 2:09 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK034_C01 there is MCP0140MC03,MC04 On inverter power because of this several jobs are pending. Thank you very much! May 31, 2025 at 2:16 PM, Nemes Patrik : 2f wrapping machine error loop May 31, 2025 at 2:18 PM, N.Gábor F.A. : Solved May 31, 2025 at 2:18 PM, Mohammad Amir : Thank you very much! May 31, 2025 at 2:19 PM, Nemes Patrik : This message was deleted. May 31, 2025 at 2:56 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK024_C01 there MCP 2F OP1 Light curtain detect error. Thank you very much! May 31, 2025 at 2:57 PM, Mohammad Amir : @FA Please check M0STK031_C01 there is MCP SMC#1 Disconnected error. Thank you very much! May 31, 2025 at 3:00 PM, N.Gábor F.A. : Checking May 31, 2025 at 3:00 PM, Mohammad Amir : Köszönom szepen 🙏 May 31, 2025 at 3:44 PM, Mohammad Amir : Please check this error came again. Thank you very much! May 31, 2025 at 3:46 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK012_P09 there is C/V stop detect time over error. May 31, 2025 at 4:14 PM, FA-CS-AGV-Masoud : This message was deleted. May 31, 2025 at 4:14 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK012_P10. May 31, 2025 at 4:15 PM, Mohammad Amir : @FA Please check this issue still exists. Thank you very much! May 31, 2025 at 6:05 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 10 Tech, 1 SL Beteg: 1 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Skwarek Tibi Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Kertész Dani Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Lajos Gábor ———————————— Formation/Modul(2) Harasztia Zoli Sarvajcz Ferenc May 31, 2025 at 8:04 PM, András : Sziasztok 2f stop detect error May 31, 2025 at 8:05 PM, Zoltán Harasztia FA : Megyek May 31, 2025 at 9:51 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. May 31, 2025 at 9:55 PM, Zoltán Harasztia FA : Cheking May 31, 2025 at 9:55 PM, 배병민 (Bae Byoungmin) : @Zoltán Harasztia FA The problem is with the optical modem settings. I will set it up tomorrow. And I will tell you how to do it during my next shift. May 31, 2025 at 9:59 PM, Zoltán Harasztia FA : Solved May 31, 2025 at 10:01 PM, Zoltán Harasztia FA : Alright, thank you. Tonight, it has already stopped 4 times due to this error, 3 of which happened while retracting the fork. We had to turn the inverter back on, move the fork to the center position, and only then it could be started again. May 31, 2025 at 10:06 PM, 배병민 (Bae Byoungmin) : Sorry, I couldn't resolve this issue due to other issues. This is caused by a signal setting issue between the crane optical modem and the optical modem on the ground. I will adjust it tomorrow. May 31, 2025 at 10:09 PM, Zoltán Harasztia FA : Thank you May 31, 2025 at 10:55 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. May 31, 2025 at 10:56 PM, Zoltán Harasztia FA : "I'm already on my way." May 31, 2025 at 11:02 PM, Zoltán Harasztia FA : Solved May 31, 2025 at 11:06 PM, FA/CS/AGV/Taimur : @Zoltán Harasztia FA can you please check STK11_P06, carrier data timeout alarm Thank you May 31, 2025 at 11:11 PM, Sarvajcz Ferenc FA : Waiting for delivery. Usual. May 31, 2025 at 11:38 PM, Zoltán Harasztia FA : @mcs Hi, could you help me? On M0CNV031, pallet U026091 doesn’t have a destination station because the machine it was supposed to go to has finished production for today and has been shut down. Could you please send this pallet back to where it came from? May 31, 2025 at 11:39 PM, VK (mcs) : Checking May 31, 2025 at 11:41 PM, VK (mcs) : There is no production in first line ? Then I will return it to STK. May 31, 2025 at 11:42 PM, Zoltán Harasztia FA : Yes, production has stopped on line 1. May 31, 2025 at 11:44 PM, VK (mcs) : Transferred to STK33 May 31, 2025 at 11:53 PM, Zoltán Harasztia FA : Thank you June 1, 2025 at 2:33 AM June 1, 2025 at 2:33 AM, András : 2F lift of stop time over June 1, 2025 at 2:33 AM, Zoltán Harasztia FA : Nézem June 1, 2025 at 2:34 AM, András : Rendben, köszi June 1, 2025 at 4:03 AM, VK (mcs) : @FA Please check 2 F M0CNV023 (35029) Stop detect error. June 1, 2025 at 4:04 AM, Zoltán Harasztia FA : Cheking June 1, 2025 at 4:12 AM, Zoltán Harasztia FA : Solved June 1, 2025 at 8:34 AM, duzzaman Md (MCS) : @FA Please check M0CNV023 Light curtain error. June 1, 2025 at 8:34 AM, duzzaman Md (MCS) : P31/P32 June 1, 2025 at 8:36 AM, N.Gábor F.A. : Checking June 1, 2025 at 8:43 AM, N.Gábor F.A. : Solved June 1, 2025 at 8:53 AM, duzzaman Md (MCS) : Please check again M0CNV023 P32 Light curtain error June 1, 2025 at 10:30 AM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 MCP SMC1 disconnected error. June 1, 2025 at 10:31 AM, N.Gábor F.A. : Checking June 1, 2025 at 10:39 AM, duzzaman Md (MCS) : @FA M0STKA037_C01 is OutOfService, having Crane W/T In Abort error. Please check Thank you! June 1, 2025 at 10:42 AM, N.Gábor F.A. : Checking June 1, 2025 at 10:46 AM, N.Gábor F.A. : Solved June 1, 2025 at 12:47 PM, 윤경환 : @ MCS/RTD Hello. Please move the 8 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. PF221-2505280023 PS22A-250260052 PS210-2505070051 PS230-2504160034 PS230-2505090047 PF220-2505290019 PS230-2505230172 PS290-2412240009 Thank you for you support. June 1, 2025 at 12:48 PM, duzzaman Md (MCS) : On it. Will update once done June 1, 2025 at 12:56 PM, duzzaman Md (MCS) : Please check the 2nd carrier no. Rest 7 job has been created. June 1, 2025 at 12:59 PM, 윤경환 : This message was deleted. June 1, 2025 at 1:00 PM, 윤경환 : Sorry. PS22A-2505260052 June 1, 2025 at 1:01 PM, duzzaman Md (MCS) : No problem. This job has been created, too. June 1, 2025 at 1:01 PM, 윤경환 : Thank you.👍 June 1, 2025 at 2:19 PM, Gabor(priv) : Modul 1. Emeleten 2 agv összeütközött, kérlek gyertek! June 1, 2025 at 2:19 PM, Duna Don : Checking June 1, 2025 at 2:25 PM, Duna Don : Solved June 1, 2025 at 5:21 PM, duzzaman Md (MCS) : @FA Please check M0STK031_C01 MCP SMC1 disconnected error. June 1, 2025 at 6:11 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 9 Tech, 1 SL Beteg: 1 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Skwarek Tibor Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Lajos Gábor ———————————— Formation/Modul(2) Harasztia Zoli Sarvajcz Ferenc June 2, 2025 at 3:47 AM June 2, 2025 at 3:47 AM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. June 2, 2025 at 3:52 AM, Sarvajcz Ferenc FA : Okey. June 2, 2025 at 6:09 AM, duzzaman Md (MCS) : @FA Good morning! Please check M0STK031_C01 there is Crane SRC Disconnected Error. Thank you ! June 2, 2025 at 6:22 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.02. "B" műszak, 9+1+1/12+1 Tech, 1Sl Overtime(1): Kiss Balázs Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(3): Takács Ádám, Denkó János, Böröcz Tamás Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(1): Boromisza Z June 2, 2025 at 6:32 AM, duzzaman Md (MCS) : @Boromisza Zoltán please check June 2, 2025 at 6:50 AM, Boromisza Zoltán : Okey Solved June 2, 2025 at 6:53 AM, duzzaman Md (MCS) : Please be acknowledged that the capacity of M0STK031 : 129% MOSTK032: 96% MOSTK033: 96% M0STK012: 98% June 2, 2025 at 6:59 AM, 배병민 (Bae Byoungmin) : @김지형(Jihyung Kim) @손병훈 PM님 금일 7라인 R@R 진행은 8시부터 시작이 맞으실까요? June 2, 2025 at 7:16 AM, 김지형(Jihyung Kim) : 8시~8시 30분 사이 시작입니다. June 2, 2025 at 7:34 AM, Niki (Modul) : Jó reggelt @Boromisza Zoltán foliázónál gond van June 2, 2025 at 7:43 AM, Boromisza Zoltán : Megyek June 2, 2025 at 7:45 AM, duzzaman Md (MCS) : @FA Please check M0STK031 MCP SMC1 disconnected error. June 2, 2025 at 7:46 AM, duzzaman Md (MCS) : Also, Please check M0CNV023_35_028 Wrapper sealing not detected error. Thank you June 2, 2025 at 7:48 AM, Horváth Adriàn : @Boromisza Zoltán Line 3 kis AGV work data alarm. Check pls June 2, 2025 at 7:48 AM, FA/CS/AGV_ Asjad : Coming June 2, 2025 at 7:56 AM, FA/CS/AGV_ Asjad : Fixed June 2, 2025 at 8:01 AM, Boromisza Zoltán : Kész June 2, 2025 at 8:11 AM, FACS_JaewonShin invited 김상태. June 2, 2025 at 8:25 AM, 윤성제(Yoon SungJe) : @윤경환 안녕하세요 조장님 PF221-2505230008 end plate 5월31일 13시20분 EMPTY로 올라간 이력있는데 전산상으로 full pallet입니다 실물 수동출고 요청드려도 될까요? 확인이 필요할 것 같습니다 June 2, 2025 at 8:25 AM, 윤경환 : 창고에서 빼달라는 말씀이시죠? June 2, 2025 at 8:25 AM, 윤성제(Yoon SungJe) : 네 맞습니다 번거롭게 해드려 죄송합니다 June 2, 2025 at 8:28 AM, 윤경환 : 네 확인해 보겠습니다. June 2, 2025 at 8:29 AM, duzzaman Md (MCS) : Still exists Also, Please check M0STK021_C01 there is Crane Fork Right Collapse Detect 3 alarm. Several jobs are pending. June 2, 2025 at 8:34 AM, Boromisza Zoltán : Okey June 2, 2025 at 8:43 AM, 김 민성 : Halo Currently transfer job remain over 100 to M0STK031. It is seem to be happen before 7 hour when 031 Stocker going to out of service. Please let us know how long not use the M0STK032. June 2, 2025 at 8:45 AM, 윤성제(Yoon SungJe) : 감사합니다 조장님 실물 확인했고 저희가 가져가도 될까요? June 2, 2025 at 8:46 AM, 윤경환 : 네 그러시면 됩니다. June 2, 2025 at 8:48 AM, Sazzad Bhai SKon : The STK showing 129% full rate. Which in not standard June 2, 2025 at 8:48 AM, Boromisza Zoltán : Solved June 2, 2025 at 8:48 AM, Boromisza Zoltán : Solved June 2, 2025 at 8:49 AM, 윤성제(Yoon SungJe) : 감사합니다 June 2, 2025 at 8:49 AM, 김 민성 : Halo Currently transfer job remain over 100 to M0STK031. It is seem to be happen before 7 hour when 031 Stocker going to out of service. Please let us know how long not use the M0STK031*. June 2, 2025 at 8:50 AM, 김 민성 : @Fa machine If know scheduled down time, please announce. June 2, 2025 at 8:54 AM, FACS_JaewonShin : ■ 2nd June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 1 Choi wooseok - Plc control 1 Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 2 Jin jaejeong Kim sangtae June 2, 2025 at 8:58 AM, Niki (Modul) : @Boromisza Zoltán 1-es gép lift error June 2, 2025 at 8:58 AM, Boromisza Zoltán : Megyek June 2, 2025 at 9:01 AM, 윤성제(Yoon SungJe) : @FA Hello, can you check module M7MFA300_P29? Unloading is not possible. June 2, 2025 at 9:02 AM, Sazzad Bhai SKon : Please raise UR, MCS didn't receive any UR June 2, 2025 at 9:05 AM, 윤성제(Yoon SungJe) : There is a problem with port 29. Unloading is not possible. We need to check by FA team. June 2, 2025 at 9:05 AM, Sazzad Bhai SKon : I understand, it's out of service as well. Yes, @FA can help June 2, 2025 at 9:06 AM, 윤성제(Yoon SungJe) : M7MFA300_P30 is not available. June 2, 2025 at 9:06 AM, Boromisza Zoltán : Kész June 2, 2025 at 9:23 AM, SKOH2/제조-셀,모듈 출하/김병호 : 화성 포장기 앞단에 AGV3대가 충전기 앞에 길을 다 막고 있어서 확인부탁드립니다. 금일 사외창고 이관품을 5라인옆 평치에서 도크장으로 이동 해야해서요 June 2, 2025 at 9:24 AM, FA/CS/AGV_ Asjad : Checking June 2, 2025 at 9:28 AM, duzzaman Md (MCS) : @FA Please check M0STK028_C01 there is MCP0140MC03,MC04 On inverter power Thank you very much! June 2, 2025 at 9:29 AM, Boromisza Zoltán : Boeing 😆😆 June 2, 2025 at 9:39 AM, Niki (Modul) : @Boromisza Zoltán lift error 3-as gépnél June 2, 2025 at 9:44 AM, Boromisza Zoltán : Megyek June 2, 2025 at 10:05 AM, Kovács Krisztián : Szükségem lenne segítségre modul line 1 m1mfa300 June 2, 2025 at 10:06 AM, Boromisza Zoltán : Megyek June 2, 2025 at 10:13 AM, Boromisza Zoltán : Kész June 2, 2025 at 10:13 AM, Kovács Krisztián : Köszönöm June 2, 2025 at 10:19 AM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! June 2, 2025 at 10:22 AM, Boromisza Zoltán : Megyek June 2, 2025 at 10:30 AM, Horváth Adriàn : @Boromisza Zoltán dokk magasraktàr zenél June 2, 2025 at 10:38 AM, Boromisza Zoltán : Úton June 2, 2025 at 10:39 AM, Boromisza Zoltán : Kész June 2, 2025 at 10:46 AM, Kovács Kármen : @Boromisza Zoltán segítségre lenne szükségünk a Line 1 P29nél June 2, 2025 at 10:50 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_Team 북측 모듈 1F M0CNv033_RTV01 기동정지라 확인 부탁드립니다. June 2, 2025 at 10:50 AM, Boromisza Zoltán : Megyek June 2, 2025 at 10:50 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK031_C01 크레인도 기동 정지 상태입니다 같이 확이 부탁드립니다 June 2, 2025 at 10:55 AM, 윤성제(Yoon SungJe) : @FAPlease check module 1F AGV3. An error occurred while transporting materials. June 2, 2025 at 10:58 AM, Duna Don : Checking June 2, 2025 at 11:03 AM, Boromisza Zoltán : Kész June 2, 2025 at 11:04 AM, Duna Don : Solved June 2, 2025 at 11:05 AM, SKOH2/제조-셀,모듈 출하/김병호 : 북측 모듈 창고 오래 걸리실까요?? 배출명령한지 한시간이 지나서요 차량,인원 대기중이라 빠른 확인 부탁드립니다 June 2, 2025 at 11:21 AM, Horváth Adriàn : @Boromisza Zoltán line1 nem kap Dunnaget. Pls check June 2, 2025 at 11:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 북측 모듈자동화 창고 M0STK031 사용할려면 얼마나 더 걸릴까요? 빠른 확인 부탁드립니다 10시 8분에 배출 명령 생성했는데 아직도 안나오고 있어서요 6셋트입니다. June 2, 2025 at 11:28 AM, FACS_Youngmin LEE : 스테커 크레인 광 통신센서 수정중입니다. June 2, 2025 at 11:29 AM, 윤성제(Yoon SungJe) : @FA M1MFA300_P06 EMPTY DUNNAGE PALLET supply is delayed. Is there a problem with MOSTK031? Line is stationary. June 2, 2025 at 11:29 AM, Boromisza Zoltán : Nem is fog mert a koreai kollégák szerelik a darut June 2, 2025 at 11:30 AM, Horváth Adriàn : Zsiir June 2, 2025 at 11:31 AM, Boromisza Zoltán : Elméletileg lehet hogy most elindul a buli June 2, 2025 at 11:38 AM, Horváth Adriàn : Màr nem bizunk ilyenekben 😁 June 2, 2025 at 11:50 AM, FACS_JaewonShin : @fa technician M0STK031 is stopped by mcp smc#1 communication. Please check optical direction and communication June 2, 2025 at 12:01 PM, 김희용 : @배병민 (Bae Byoungmin) PM님 광모뎀 센서 문제라고 가정하고 교체 후 세팅시간 공유부탁드립니다. June 2, 2025 at 12:03 PM, 김지형(Jihyung Kim) : @배병민 (Bae Byoungmin) 7라인 R@R 20시에 종료예정입니다 참고부탁드립니다. June 2, 2025 at 12:05 PM, 배병민 (Bae Byoungmin) : 네 정보 감사합니다 June 2, 2025 at 12:06 PM, 윤성제(Yoon SungJe) : @MCS Hello, can you delete the JOB for M7MFA300_P02 T702585? This pallet was manually discharged. June 2, 2025 at 12:07 PM, 배병민 (Bae Byoungmin) : 지금 SCS 잡생성된거 전체 출고하고 교체 진행할려고 합니다. 교체 및 재세팅은 1시간정도 예상합니다 June 2, 2025 at 12:08 PM, duzzaman Md (MCS) : Done June 2, 2025 at 12:08 PM, 윤성제(Yoon SungJe) : Thank you so much. June 2, 2025 at 12:46 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사힙니다 June 2, 2025 at 12:46 PM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! June 2, 2025 at 1:08 PM, Farkas Kevin : Please check the F23 Module 1F warehouse. It has continous alarms and the AGVs are not bringing the Dunnage to Line #7. June 2, 2025 at 1:10 PM, 윤성제(Yoon SungJe) : @FA Please check, empty dunnage pallet is not coming. Job has been created. M7MFA300_P06 June 2, 2025 at 1:13 PM, 김지형(Jihyung Kim) : @배병민 (Bae Byoungmin) R@R간 전담인원 배정부탁드립니다. 빠른 조치 부탁드립니다. June 2, 2025 at 1:14 PM, 배병민 (Bae Byoungmin) : 네 지금 모듈 완제품 31번창고 조치 다되어 올라가겠습니다 June 2, 2025 at 1:15 PM, Boromisza Zoltán : Megyek June 2, 2025 at 1:15 PM, duzzaman Md (MCS) : Its moving June 2, 2025 at 1:16 PM, Farkas Kevin : Thank you June 2, 2025 at 1:23 PM, Niki (Modul) : @Boromisza Zoltán 3-as gép az anyag meg állt a lift előtt June 2, 2025 at 1:27 PM, Boromisza Zoltán : Megyek June 2, 2025 at 1:27 PM, Boromisza Zoltán : Itt vagyok June 2, 2025 at 1:28 PM, duzzaman Md (MCS) : @FA Please check M0CNV023_34_031 there is Stop detect error. Thank you ! June 2, 2025 at 1:38 PM, Boromisza Zoltán : Kész June 2, 2025 at 1:38 PM, Boromisza Zoltán : Okey Solved June 2, 2025 at 1:40 PM, 윤성제(Yoon SungJe) : @MCS Hello, can you create the JOB of M7MFA300_P04 as 1F? CARRIER IDT701117 June 2, 2025 at 1:40 PM, Bozó Gyula : Hálás köszönet!! 🙏 June 2, 2025 at 1:46 PM, duzzaman Md (MCS) : Its moving now. June 2, 2025 at 1:47 PM, KIM SEYEON [김세연]_FA : 저도 지금 갑니다 June 2, 2025 at 1:48 PM, 윤성제(Yoon SungJe) : Thank you so much. June 2, 2025 at 2:22 PM, Horváth Adriàn : @Boromisza Zoltán dokk folyosón megint szól a magasraki. June 2, 2025 at 2:35 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK031_C01 크레인도 기동 정지 상태입니다 같이 확이 부탁드립니다. June 2, 2025 at 2:36 PM, FACS_Hyeongi Son : 이동중입니다 June 2, 2025 at 2:38 PM, Boromisza Zoltán : Úton June 2, 2025 at 3:47 PM, Kurkó Péter : Hello pls check 1f dunnage warehouse thx June 2, 2025 at 3:51 PM, 김지형(Jihyung Kim) : 1F RTV OP2 CV034 DIV updown time over error Occurence time - 14:44:36 Why no one check it? Where is FA technicians? June 2, 2025 at 3:52 PM, 김지형(Jihyung Kim) : @배병민 (Bae Byoungmin) 더니지 출고 지연으로 라인 정지중입니다 빠른 대응 부탁드립니다 2번째입니다.. June 2, 2025 at 4:02 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon why empty dunnage is not come to module line 7? June 2, 2025 at 4:02 PM, KIM SEYEON [김세연]_FA : it is urgent June 2, 2025 at 4:04 PM, 김지형(Jihyung Kim) : 방금입고됐습니다 CV div up down에러 조치가 안되서 늦게온거같습니다 June 2, 2025 at 4:05 PM, duzzaman Md (MCS) : Last job completed in M7MFA300_P06 is at 16:01 After that, no LR yet June 2, 2025 at 4:12 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B @Koncz Tamás please let FA technicians to check module storage all the time by 8 pm. module R@R is now ongoing. June 2, 2025 at 6:00 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 2, 2025 at 6:01 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please remind June 2, 2025 at 6:02 PM, Mr.Miti (미티) FA : I've already told the technicians. They'll be paying close attention.(thumbsup) June 2, 2025 at 6:03 PM, Alexandra : 2f in lift stop time over June 2, 2025 at 6:11 PM, FACS_Hyeongi Son : Solved June 2, 2025 at 6:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 2, 2025 at 6:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) M0STK031 bank 재가동 언제쯤 가능할까요 ?? 펨님 빈더니지 입고후에 8시경부터 명일 사외창고 이관 모듈 배출 예정입니다. 8시 이전에 사용 가능할지요?? June 2, 2025 at 6:37 PM, 배병민 (Bae Byoungmin) : 조치는 해뒀는데 지금 가보겠습니다 June 2, 2025 at 6:38 PM, VK (mcs) : @FA Please check M0STK031 MCP SMC1 disconnected error. June 2, 2025 at 6:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 펨님 June 2, 2025 at 6:49 PM, 배병민 (Bae Byoungmin) : 재가동 되었습니다 좀더 지켜보겠습니다 June 2, 2025 at 7:24 PM, VK (mcs) : @FA Please check M0STK031 Crane SRC disconnected error. June 2, 2025 at 8:04 PM, Magosi Erik : Good evening. 2 material agv collided on Line3-4 can someone check please? June 2, 2025 at 8:06 PM, FA/CS/AGV/Taimur : Checking June 2, 2025 at 8:11 PM, FA/CS/AGV/Taimur : Sorted. June 2, 2025 at 8:19 PM, Magosi Erik : Thank You Sir June 2, 2025 at 8:20 PM, FA/CS/AGV/Taimur : Anytime Uram June 2, 2025 at 8:35 PM, Tóth Gyula : Sziasztok, U024168 paletta nem jön ki az MOCVN033_M03 porton. June 3, 2025 at 4:06 AM June 3, 2025 at 4:06 AM, Maczó Anikó : Sziasztok 2 emeleten lift stop time over June 3, 2025 at 4:11 AM, Csepi Árpád : Kész June 3, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.03. "B" műszak, 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(2): Denkó János, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Böröcz Tamás Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, G June 3, 2025 at 6:57 AM, Niki (Modul) : Jó reggelt @Boromisza Zoltán 2.fóliázó gépnél gond van June 3, 2025 at 7:01 AM, Gerbovits Kevin : Úton June 3, 2025 at 7:35 AM, Gerbovits Kevin : Kész. June 3, 2025 at 8:02 AM, Kovács Krisztián : @Boromisza Zoltán segítségre lenne szükség Line 4 m4mfa300 June 3, 2025 at 8:14 AM, Shakir (MCS) : @FA Please check M0STK025_C01 there is Crane ankle right detect error again. Thank you June 3, 2025 at 8:24 AM, Boromisza Zoltán : Okey June 3, 2025 at 8:37 AM, Boromisza Zoltán : Solved June 3, 2025 at 9:17 AM, Bozó Gyula : Sziasztok Szeretnék segítséget kérni az OQC porthoz! Köszönöm June 3, 2025 at 9:17 AM, Shakir (MCS) : @FA Please check M0STK022_C01 there is Crane fork Left collapse Detect1 error. Thank you! June 3, 2025 at 9:17 AM, Boromisza Zoltán : Megyünk June 3, 2025 at 9:17 AM, Boromisza Zoltán : Boeing 😆 June 3, 2025 at 9:20 AM, Bozó Gyula : Megoldódott közben!! June 3, 2025 at 9:41 AM, Boromisza Zoltán : Solved June 3, 2025 at 11:00 AM, Shakir (MCS) : @FA Please check M0STK025_C01 there is MCP GF OP2 Light Curtain Detect Error. Thank you June 3, 2025 at 11:00 AM, Gerbovits Kevin : Going June 3, 2025 at 11:11 AM, Gerbovits Kevin : Solved June 3, 2025 at 11:45 AM, Shakir (MCS) : @FA Please check M0STK021 Crane STK action 5 min time over error. Thank you June 3, 2025 at 11:45 AM, Boromisza Zoltán : Going June 3, 2025 at 11:49 AM, Boromisza Zoltán : Solved June 3, 2025 at 2:59 PM, Niki (Modul) : @Boromisza Zoltán hátsó raktárban gond van June 3, 2025 at 3:10 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 도크 1F M0CNV033_RTV01 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 3, 2025 at 3:10 PM, FACS_Hyeongi Son : 이동하겠습니다 June 3, 2025 at 3:11 PM, Boromisza Zoltán : Úton June 3, 2025 at 3:13 PM, Shakir (MCS) : @FA Please check M0CNV023_RTV02 ,there is RTV l car stopper down error Thank you! June 3, 2025 at 3:13 PM, Boromisza Zoltán : Solved June 3, 2025 at 3:14 PM, Boromisza Zoltán : Okey June 3, 2025 at 3:28 PM, Gerbovits Kevin : Solved June 3, 2025 at 3:58 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 도크 1F M0CNV033_RTV01 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 3, 2025 at 3:59 PM, FACS_Hyeongi Son : 넵 이동중입니다 June 3, 2025 at 4:14 PM, 승규 (BAEK SEUNGGYU) : @FA M1MFA300_P01 Carrier ID T701783 Please cancel the Jop. It has already been put into the facility, but Jop remains. June 3, 2025 at 4:15 PM, Shakir (MCS) : Job has been cancelled. Thank you June 3, 2025 at 4:16 PM, 승규 (BAEK SEUNGGYU) : Thank you so much! June 3, 2025 at 4:32 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 도크 1F M0CNV033_RTV01 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 3, 2025 at 4:32 PM, FACS_Hyeongi Son : 넵 이동 하겠습니더 June 3, 2025 at 4:42 PM, Horváth Adriàn : @Boromisza Zoltán line 3 endplate gantry. Gripper detect error. Help pls June 3, 2025 at 4:43 PM, Boromisza Zoltán : Megyünk June 3, 2025 at 4:50 PM, Boromisza Zoltán : Kész June 3, 2025 at 4:54 PM, FACS_Hyeongi Son : 정상가동중입니다 June 3, 2025 at 4:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 도크 1F M0CNV033_RTV01 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 3, 2025 at 4:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : 계속 알람 발생합니다 June 3, 2025 at 5:05 PM, FACS_Hyeongi Son : 모니터링 하면서 점검 하겠습니다 June 3, 2025 at 5:07 PM, Shakir (MCS) : @FA Please check M0STK038_P11 is OOS 1F, several jobs getting delayed. Thank you June 3, 2025 at 5:08 PM, Boromisza Zoltán : Okey June 3, 2025 at 5:15 PM, Boromisza Zoltán : Solved June 3, 2025 at 6:03 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:13 PM, Mohammad Amir : @FA @Csepi Árpád Good evening, Please check M0STK034_C01 there is CRANE hoist down run over detect error and because of this error there is a queue of materials waiting on the M0CNV036. Thank you very much! June 3, 2025 at 6:19 PM, Édl Tamás : Solved June 3, 2025 at 6:19 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 6:40 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0CNV036_RTV01 there is Car distance sensor time delay error and because of this several jobs are pending. Thank you very much! June 3, 2025 at 6:41 PM, FACS_Hyeongi Son : We are working on it June 3, 2025 at 6:41 PM, Mohammad Amir : Thank you very much for the confirmation! June 3, 2025 at 7:35 PM, Mohammad Amir : @Csepi Árpád @FA @Édl Tamás Please check M0STK023_C01 there is CRANE FORK left collapse detect 1 error . Thank you very much! June 3, 2025 at 7:44 PM, Csepi Árpád : Solved June 3, 2025 at 7:44 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 8:28 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK023_C01 there is MCP 2F 0P1 Light Curtain detected error. Thank you very much! June 3, 2025 at 8:52 PM, Csepi Árpád : Solved June 3, 2025 at 8:52 PM, Mohammad Amir : Thank you very much! June 4, 2025 at 1:17 AM June 4, 2025 at 1:17 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK021_C01 there is CRANE Unload timeout. Thank you very much! June 4, 2025 at 1:24 AM, Csepi Árpád : Solved June 4, 2025 at 1:32 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 4:05 AM, Mohammad Amir : @FA @Édl Tamás Please check M0STK021_C01 there is CRANE FORK right collapse detect 1 error. Thank you very much! June 4, 2025 at 4:15 AM, Magosi Erik : @Csepi Árpád line3-4 material lift hibában áll. Kérlek csekkolj rá June 4, 2025 at 4:21 AM, Csepi Árpád : Kész June 4, 2025 at 4:21 AM, Magosi Erik : Köszi Árpi June 4, 2025 at 4:22 AM, Csepi Árpád : Szivi June 4, 2025 at 4:40 AM, Mohammad Amir : @FA @Csepi Árpád Please check this issue still exists since 4:11 AM. Thank you very much! June 4, 2025 at 4:52 AM, Csepi Árpád : Solved June 4, 2025 at 4:52 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 5:33 AM, Magosi Erik : @Csepi Árpád modul 4es cella agvnek nem tetszik valami. Az acs visszajelző nem zöld. Kérlek csekkoljatok rá. Itt áll az 1es sor előtt June 4, 2025 at 5:33 AM, Magosi Erik : Köszi June 4, 2025 at 5:38 AM, Csepi Árpád : Kész June 4, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.04. FA "D" műszak: 9/13 Overtime (0):- Substitution (1): Szücs Géza Imre Sick (1):Nagy Zsolt Holiday (3): Martina Dávid, Kasztel Balázs, Hufnágel Dániel Shift change(0): ----- Elektróda(3): Oláh András, Szabadi Miklós, Kiss Balázs ----- Assembly GF(2): Novák Károly, Zsurbej Zsolt ----- Assembly 1F(2): Kovács Szabolcs, Novák Zoltán ----- Form+Modul(2): Nagy Gábor, Magyar Balázs June 4, 2025 at 6:31 AM, Shakir (MCS) : @FA Please check M0STK034_P11 - Div pallet detect error. Thank you ! June 4, 2025 at 6:38 AM, N.Gábor F.A. : Solved June 4, 2025 at 6:46 AM, Jun(정우준)_SKOH FA : Day shift FA Schedule Date: 2025.06.04 Time: 06:00~18:00 1. Jeong WooJun PM 정우준 Köszönöm szépen June 4, 2025 at 6:58 AM, Shakir (MCS) : @FA Please check 1F M0CNV036 RTV car fiber communication error. Thank you June 4, 2025 at 7:28 AM, Shakir (MCS) : @FA Please check M0STK011_C01 Crane fork right over run detect. Thank you June 4, 2025 at 7:39 AM, N.Gábor F.A. : Checking all June 4, 2025 at 7:48 AM, N.Gábor F.A. : Solved June 4, 2025 at 7:55 AM, N.Gábor F.A. : @MCS Hello Could you check the job of this pallet? R200225 Currently it is just waiting here on port M0CNV032_P02. June 4, 2025 at 7:57 AM, Shakir (MCS) : There no job for this pallet June 4, 2025 at 7:58 AM, Shakir (MCS) : This message was deleted. June 4, 2025 at 7:58 AM, Shakir (MCS) : Where you want this pallet ?I will create the job June 4, 2025 at 7:59 AM, N.Gábor F.A. : Unfortunately, I don't know where it originally went, could you send it back to the warehouse? June 4, 2025 at 7:59 AM, Shakir (MCS) : Okay, working on it June 4, 2025 at 8:03 AM, Shakir (MCS) : Job has been initiated to STK034, AGV11 assigned. Thank you June 4, 2025 at 8:11 AM, N.Gábor F.A. : Thank you very much June 4, 2025 at 8:49 AM, Shakir (MCS) : @FA Please check M0STK034_P01- Div pallet detect error. Thank you ! June 4, 2025 at 8:52 AM, Sazzad Bhai SKon : @ACS @FA/CS/AGV/Taimur Could you please check AGV#09. M0MGV031_VC09 June 4, 2025 at 8:54 AM, N.Gábor F.A. : Checking June 4, 2025 at 8:58 AM, FA/CS/AGV/Taimur : AGV has been shut down by line members due to No production for the Line 1. Will be turned back on once the line starts productions. If necessary can be sent back with ACS job amendment. June 4, 2025 at 9:00 AM, Sazzad Bhai SKon : This AGV has a pending job for 1 line. And 1 line port P06 is active. June 4, 2025 at 9:02 AM, FA/CS/AGV/Taimur : We will start the AGV to initiate the pending job. Thank you for notifying. June 4, 2025 at 9:04 AM, FACS_Youngmin LEE : @Sazzad Bhai SKon plz check STK34 Jobs all jobs status is queued June 4, 2025 at 9:05 AM, FACS_Youngmin LEE : solved June 4, 2025 at 9:10 AM, Sazzad Bhai SKon : What was the problem and how did you solve? June 4, 2025 at 9:12 AM, FACS_Youngmin LEE : turn on manual and turn on auto OP June 4, 2025 at 9:18 AM, FA/CS/AGV/Taimur : Resolved. June 4, 2025 at 9:50 AM, Shakir (MCS) : @FA Please check M0STK021_C01 Double cargo error Thank you June 4, 2025 at 9:51 AM, 윤성제(Yoon SungJe) : @FA Hello, can you check the sensor number M1MFA300_P25? Port initials are not available. June 4, 2025 at 9:56 AM, Shakir (MCS) : @N.Gábor F.A. June 4, 2025 at 9:57 AM, N.Gábor F.A. : Checking June 4, 2025 at 10:00 AM, Shakir (MCS) : Also please check M0STK024, same error occurred. June 4, 2025 at 10:05 AM, N.Gábor F.A. : Checking June 4, 2025 at 10:12 AM, N.Gábor F.A. : Solved June 4, 2025 at 11:09 AM, Shakir (MCS) : @FA Please check M0STK034_C01 there is MCP 1F HP1 Light Curtain detected error. Thank you very much! June 4, 2025 at 11:13 AM, Shakir (MCS) : @N.Gábor F.A. June 4, 2025 at 11:13 AM, N.Gábor F.A. : Checking checking June 4, 2025 at 1:20 PM, Shakir (MCS) : @FA Please check M0STK028_C01 there is CRANE FORK right collapse detect 2 error. Thank you very much! June 4, 2025 at 1:22 PM, Roland : Hello. Can you help me at CCS, please? We can’t warehouse pallets to M0CNV021. Thank you! June 4, 2025 at 1:26 PM, N.Gábor F.A. : Checking June 4, 2025 at 1:29 PM, Shakir (MCS) : Because M0STK021 is OOS @FA CRANE FORK right collapse detect 3 error. @FA Thank you June 4, 2025 at 1:58 PM, Shakir (MCS) : @FA Please check M0STK028/27_P02 input ports are OOS, carriers are waiting. Thank you June 4, 2025 at 1:59 PM, N.Gábor F.A. : Checking June 4, 2025 at 2:03 PM, N.Gábor F.A. : Solved June 4, 2025 at 2:27 PM, Shakir (MCS) : @FA Please check M0STK035_P01 - Div pallet detect error. Thank you ! June 4, 2025 at 2:29 PM, FACS_Youngmin LEE : going June 4, 2025 at 2:30 PM, FACS_Youngmin LEE : solved June 4, 2025 at 3:34 PM, Sazzad Bhai SKon : U026575 job is alternated because destination manual port is IN type. M0STK031_M01 June 4, 2025 at 3:41 PM, N.Gábor F.A. : Please delete that work, we don't use the manual port because it is not compatible with pallets. June 4, 2025 at 3:44 PM, Shakir (MCS) : Job has been cancelled June 4, 2025 at 3:45 PM, N.Gábor F.A. : Thank you June 4, 2025 at 4:08 PM, Shakir (MCS) : @FA Please check M0CNV032 Stop detect error Thank you June 4, 2025 at 4:08 PM, N.Gábor F.A. : Checking June 4, 2025 at 4:31 PM, Shakir (MCS) : @FA Please check M0STK035_P01 - Div pallet detect error. Thank you ! June 4, 2025 at 4:36 PM, FACS_Youngmin LEE : solved June 4, 2025 at 6:13 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 10 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Gégény Dávid Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Fabricius Gergő ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 4, 2025 at 7:50 PM, VK (mcs) : @FA Please check M0STK035 DIV pallet detect error. M0STK034 MCP 0140MC03 and MC04 inverter power error June 4, 2025 at 7:50 PM, FACS_Hyeongi Son : Going June 4, 2025 at 8:16 PM, FACS_TaehyeongJin : STK34 크레인이 뒤틀린 라이트 커튼으로 인해 간섭이 발생해 라이트커튼 위치 보정 작업중입니다 June 4, 2025 at 8:26 PM, SKOH2/제조-셀,모듈 출하/김병호 : 보정작업이 오래걸리실가요? 34번뱅크 명일 출하 셀 배출작업중이어서요 June 4, 2025 at 8:28 PM, FACS_TaehyeongJin : 10분 내외로 작업 종료될것 같습니다 June 4, 2025 at 8:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다 감사합니다 June 4, 2025 at 8:55 PM, FACS_TaehyeongJin : 펜스처짐 구간 보정 완료하였습니다 모니터링 진행하겠습니다 June 4, 2025 at 8:57 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 June 4, 2025 at 9:23 PM, KIM SEYEON [김세연]_FA : 수고하셨습니다 June 4, 2025 at 10:15 PM, VK (mcs) : @FA Please check M0STK021 Crane STK action 5 minutes time over error. June 4, 2025 at 10:23 PM, Sarvajcz Ferenc FA : Solved. June 5, 2025 at 6:03 AM June 5, 2025 at 6:03 AM, Shakir (MCS) : @FA Please check M0STK034_P01, Job getting delayed. Thank you ! June 5, 2025 at 6:07 AM, N.Gábor F.A. : Checking June 5, 2025 at 7:05 AM, Shakir (MCS) : Please check this again Thank you June 5, 2025 at 7:08 AM, N.Gábor F.A. : Checking June 5, 2025 at 7:12 AM, Shakir (MCS) : @FA Please check M0STK035_P13 - Div pallet detect error. Thank you ! June 5, 2025 at 7:14 AM, N.Gábor F.A. : Checking June 5, 2025 at 7:17 AM, N.Gábor F.A. : Solved June 5, 2025 at 8:13 AM, 윤성제(Yoon SungJe) : @FAHello, can you check module 7 line M7MFA300_P28,P29? Material recovery is not possible. June 5, 2025 at 8:13 AM, N.Gábor F.A. : Sure Comming June 5, 2025 at 8:27 AM, FACS_JaewonShin : ■ 5th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Choi wooseok Oh changhoon - PLC control 1 Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 2 Jin jaejeong Kim sangtae June 5, 2025 at 8:30 AM, 윤성제(Yoon SungJe) : @진재정 @김상태 안녕하세요 7라인 28,29번 포트 지원 가능하실까요? 지난번 R@R때처럼 포트에서 자재회수가 안되고 있습니다 June 5, 2025 at 8:36 AM, 차용문/CHA YONGMOON : @배병민 (Bae Byoungmin) 5라인 보충전 작업때문에 4,5라인 사이 포트 미사용 가능할까요? June 5, 2025 at 8:39 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 금일 오전에 해당 충전포트 미사용하고 동선에 AGV 회피하겠습니다 June 5, 2025 at 8:44 AM, 배병민 (Bae Byoungmin) : 포트 진입 미사용 설정 완료해두었습니다. June 5, 2025 at 8:48 AM, 윤성제(Yoon SungJe) : @MCS Hello, can you delete M7MFA300_P28,PS230-2505200017 JOB? The operator. June 5, 2025 at 8:48 AM, 윤성제(Yoon SungJe) : The operator pressed the wrong number. June 5, 2025 at 8:51 AM, Shakir (MCS) : Job Cancelled, Thanks June 5, 2025 at 8:52 AM, 윤성제(Yoon SungJe) : Thank you so much. June 5, 2025 at 9:40 AM, Shakir (MCS) : @FA Please check M0STK027_C01 there is CRANE FORK left collapse detect 1 error. - M0CNV021_M02 : STOP DETECT ERROR Thank you June 5, 2025 at 9:42 AM, N.Gábor F.A. : This message was deleted. June 5, 2025 at 9:42 AM, N.Gábor F.A. : Checking June 5, 2025 at 9:45 AM, Shakir (MCS) : M0CNV023_35_028 : Wrapper Heater Temp Alarm June 5, 2025 at 9:50 AM, N.Gábor F.A. : @Shakir (MCS) Hello, could you send this material to the warehouse? PS290-2504040014 It's just standing this port and don't have a job. M0CNV021_M02 June 5, 2025 at 9:53 AM, Shakir (MCS) : Could you please check carrier id again, Not in carrier list June 5, 2025 at 9:55 AM, N.Gábor F.A. : This is the carrier number June 5, 2025 at 10:01 AM, Shakir (MCS) : There is Id read issue, Now carrier started to move. Thank you June 5, 2025 at 10:38 AM, Simon Attila : Please check second floor CV022 and CV025 RTV<>STK Alive Signal Error Thank you June 5, 2025 at 10:40 AM, Roland : Hello. M0CNV022 - CV027 and CV030 RTV STK alive signal error. Can you check it, please? June 5, 2025 at 10:44 AM, Shakir (MCS) : @FA Please check M0STK025 MCP SMC1 disconnected error. Thank you June 5, 2025 at 10:44 AM, N.Gábor F.A. : Checking June 5, 2025 at 10:47 AM, FACS_Youngmin LEE : solved June 5, 2025 at 10:48 AM, 윤성제(Yoon SungJe) : @FA 1F material AGV collided. Please check AGV NUMBER 1,3 June 5, 2025 at 10:49 AM, Shakir (MCS) : @FA M0STK023_C01: MCP 2F OP1 Light curtain detect error Thank you June 5, 2025 at 10:49 AM, 윤성제(Yoon SungJe) : Module 7 line June 5, 2025 at 10:49 AM, FA/CS/AGV/Taimur : Checking June 5, 2025 at 10:49 AM, N.Gábor F.A. : Checking June 5, 2025 at 10:55 AM, FA/CS/AGV/Taimur : Cleared. Thank you June 5, 2025 at 10:59 AM, Shakir (MCS) : Both AGV 1 and AGV 3 experienced a SLAM error rear traction motor error at same time, which led to a collision. June 5, 2025 at 11:00 AM, N.Gábor F.A. : Solved June 5, 2025 at 11:00 AM, Shakir (MCS) : This message was deleted. June 5, 2025 at 11:01 AM, Shakir (MCS) : @FA M0CNV023_36_035 : Wrapper Heater Temp Alarm Thank you June 5, 2025 at 11:02 AM, FA/CS/AGV/Taimur : It was ACS traffic control logic error which lead to AGV collision detection and bunper strip triggered while AGV: 03 was rotating. June 5, 2025 at 11:04 AM, Shakir (MCS) : @FA Please check M0STK023_C01, Crane move timeout. Thank you June 5, 2025 at 11:12 AM, N.Gábor F.A. : Solved June 5, 2025 at 12:01 PM, Shakir (MCS) : @FA M0STK023_C01: MCP 2F OP1 Light curtain detect error Thank you June 5, 2025 at 12:41 PM, Shakir (MCS) : @FA Please check M0STK021_C01 there is CRANE FORK right collapse detect 1 error. Thank you June 5, 2025 at 12:44 PM, N.Gábor F.A. : Checking June 5, 2025 at 12:49 PM, Szabolcs : @FA M0CNV033_BP12 problem. Check please. June 5, 2025 at 1:05 PM, N.Gábor F.A. : Solved June 5, 2025 at 1:07 PM, 승규 (BAEK SEUNGGYU) : @FA M7MFA300_P06 Dunnage cannot be put in. Please check it. June 5, 2025 at 1:09 PM, FA/CS/AGV/Taimur : Checking June 5, 2025 at 2:12 PM, Roland : Hello. Can you check M0CNV022 - RTV car error, please? Thank you June 5, 2025 at 2:12 PM, N.Gábor F.A. : Checking June 5, 2025 at 2:19 PM, N.Gábor F.A. : Solved June 5, 2025 at 4:09 PM, Shakir (MCS) : @FA M0STK031_C01: MCP GF OP1 Light curtain detect error Thank you June 5, 2025 at 4:12 PM, N.Gábor F.A. : Checking June 5, 2025 at 4:44 PM, Shakir (MCS) : @FA Please check M0STK013 “Crane carrier data mismatch “ Thank you June 5, 2025 at 4:44 PM, N.Gábor F.A. : Checking June 5, 2025 at 4:55 PM, N.Gábor F.A. : Solved June 5, 2025 at 5:10 PM, Shakir (MCS) : @FA Please check M0CNV032_P01, Stop detect error. Thank you June 5, 2025 at 5:13 PM, N.Gábor F.A. : Checking June 5, 2025 at 5:55 PM, FACS_JaewonShin invited FACS_Wooseok Choi, FACS_Bareum kim and FACS_오창훈_CHANGHOON. June 5, 2025 at 6:01 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 10 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Gégény Dávid ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 5, 2025 at 6:06 PM, András : 2F floor in position error June 5, 2025 at 6:07 PM, Zoltán Harasztia FA : Mindjárt megyünk June 5, 2025 at 6:09 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK023_C01 there is CRANE Fork Right Collapse detect 1 error. Thank you! June 5, 2025 at 6:09 PM, Zoltán Harasztia FA : Cheking June 5, 2025 at 6:18 PM, Zoltán Harasztia FA : Solved June 5, 2025 at 6:19 PM, András : Thx 😉 June 5, 2025 at 6:21 PM, Döme György F.A : Solved June 5, 2025 at 6:23 PM, Mohammad Amir : Thank you! June 5, 2025 at 6:24 PM, Döme György F.A : Szívesen June 6, 2025 at 12:32 AM June 6, 2025 at 12:32 AM, Mohammad Amir : @Döme György F.A Please check M0STK035_P01 there is DIV Pallet Detect Error,one job is pending because of this issue. Thank you very much! June 6, 2025 at 12:32 AM, Döme György F.A : Checking June 6, 2025 at 12:35 AM, Döme György F.A : Solved June 6, 2025 at 12:35 AM, Mohammad Amir : Köszönöm szepen! June 6, 2025 at 12:35 AM, Döme György F.A : Nagyon szívesen! June 6, 2025 at 1:46 AM, Mohammad Amir : @Döme György F.A Please check M0STK035_P01 there is DIV Pallet Detect Error,one job is pending because of this issue. Thank you very much! June 6, 2025 at 1:47 AM, Zoltán Harasztia FA : Cheking June 6, 2025 at 1:48 AM, Zoltán Harasztia FA : Solved June 6, 2025 at 3:54 AM, Zoltán Harasztia FA : @Mohammad Amir Hi, I have a question: would it be possible to configure the F0 BPM012 machine so that the pallets are not taken from warehouse M0STK035, but from M0STK034 instead? Every single unit causes a "P01- and port div pallet DETECT error," and we need to have this checked in the morning June 6, 2025 at 3:55 AM, Mohammad Amir : Checking June 6, 2025 at 3:58 AM, Mohammad Amir : Yes ,it is possible. Would you like me to make in a way that Pallets are only taken from STK034 not form STK035? Thank you very much! June 6, 2025 at 3:59 AM, Zoltán Harasztia FA : Yes, I would like it that way. June 6, 2025 at 3:59 AM, Mohammad Amir : Sure ,I am working in it. Thank you very much! June 6, 2025 at 4:00 AM, Zoltán Harasztia FA : Thank you for your help. June 6, 2025 at 4:00 AM, Mohammad Amir : You are welcome! June 6, 2025 at 4:03 AM, Mohammad Amir : I have made the required changes. Now you will just receive from STK034. ✅ I am monitoring. Feel free to inform me if you face any issues. Thank you very much! June 6, 2025 at 4:04 AM, Zoltán Harasztia FA : Thank you very much! June 6, 2025 at 4:05 AM, Mohammad Amir : You are welcome! Please also inform me when you would like me to make the process back to normal. June 6, 2025 at 4:20 AM, Zoltán Harasztia FA : The Z101057 pallet is currently on M0STK035 P01, but nothing is being done with it because it has no destination. Please send it back to the warehouse. June 6, 2025 at 4:20 AM, Mohammad Amir : Sure , Working on it. June 6, 2025 at 4:22 AM, Mohammad Amir : Information has been updated and job has been created successfully ✅. Please check M0STK035_P01 it is OOS that's why it is not moving. Thank you very much! June 6, 2025 at 6:26 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.06. 10+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Support(1): 김지 June 6, 2025 at 6:26 AM, duzzaman Md (MCS) : @FA Good morning! Please check M0STK023_C01 there is CRANE Unload Timeout error. Thank you! June 6, 2025 at 6:39 AM, Denkó Jani (F.A.) : Solved June 6, 2025 at 8:00 AM, FACS_JaewonShin : ■ 6th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 3 Jin jaejeong Kim sangtae Kim bareum June 6, 2025 at 8:40 AM, Kovács Kármen : @Boromisza Zoltán @Gerbovits Kevin @Denkó Jani (F.A.) L4 Endplate gantry communication errorral áll. Nézzetek rá kérlek. Köszi June 6, 2025 at 8:40 AM, Denkó Jani (F.A.) : Megyünk June 6, 2025 at 8:45 AM, duzzaman Md (MCS) : @FA Kindly check M0STK021_C01 Crane ankle left detect error Thanks ! June 6, 2025 at 9:13 AM, duzzaman Md (MCS) : @FA Please check M0STK024_C01 there is Crane shelf in abort (double cargo). Thank you June 6, 2025 at 9:14 AM, duzzaman Md (MCS) : Still exists since last 35 mins June 6, 2025 at 9:20 AM, Niki (Modul) : Sziasztok @Boromisza Zoltán 1es gépnél a lift megállt June 6, 2025 at 9:22 AM, Denkó Jani (F.A.) : We've just finished troubleshooting another problem, let's go check out the crane. June 6, 2025 at 9:25 AM, Boromisza Zoltán : Megyek June 6, 2025 at 9:26 AM, Boromisza Zoltán : Kész June 6, 2025 at 9:28 AM, Denkó Jani (F.A.) : Solved June 6, 2025 at 9:30 AM, Denkó Jani (F.A.) : The fire alarm system on this crane is being tested, so it is indicating an error. When they are finished, the error will disappear. June 6, 2025 at 9:34 AM, duzzaman Md (MCS) : Thank you June 6, 2025 at 9:40 AM, Boromisza Zoltán : Kész June 6, 2025 at 9:43 AM, Denkó Jani (F.A.) : M0CNV032 CV07 stops at every pallet due to "DIV pallet detect error", please check because we don't have the capacity for someone to stand here all day pressing the reset-start button. There is probably some program error because it starts automatically afterwards. Thank you. June 6, 2025 at 10:00 AM, Roland : Hello. Can you check M0STK021-P01 - PS22A-2506020019 pallet stopped at port and it doesnt want come out. Thank you for help! June 6, 2025 at 10:01 AM, Denkó Jani (F.A.) : Going June 6, 2025 at 10:09 AM, Niki (Modul) : @Boromisza Zoltán középső foliázó géppel gond van June 6, 2025 at 10:15 AM, Kovács Kármen : @Boromisza Zoltán @Gerbovits Kevin @Denkó Jani (F.A.) L4 felső burkolatnál van egy kis gond. Az üres palettát vinné az AGV. Gyertek majd ha lesz időtök. Köszi June 6, 2025 at 10:21 AM, Boromisza Zoltán : Solved June 6, 2025 at 10:22 AM, FA/CS/AGV/Taimur : @mcs can you delete job for AGV:02 in 3,4 line RM GF module. It has UR for empty pallet from gantry which is creating ACS alarm. Thankyou June 6, 2025 at 10:27 AM, Denkó Jani (F.A.) : Solved June 6, 2025 at 11:18 AM, duzzaman Md (MCS) : @FA Please check M0CNV023-35_028 Wrapper wrap residual Det alarm. June 6, 2025 at 11:32 AM, Denkó Jani (F.A.) : the operators only change foil June 6, 2025 at 11:51 AM, Niki (Modul) : @Denkó Jani (F.A.) gond van a foliázónál el is szakadt az a car meg adat elcsúszott June 6, 2025 at 11:53 AM, Denkó Jani (F.A.) : Hamarosan érkezek June 6, 2025 at 11:56 AM, Ákos (Modul 2.E.) : Okos köszönöm várunk June 6, 2025 at 11:57 AM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 6, 2025 at 11:58 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK031_P12(north) carrier id : U025224 알람발생으로 제품 배출이 안되고 있습니다 확인 부탁드립니다. June 6, 2025 at 11:59 AM, Niki (Modul) : CVO29 STOP detect error June 6, 2025 at 12:20 PM, FACS_Youngmin LEE : 조치되었습니다. June 6, 2025 at 12:23 PM, Denkó Jani (F.A.) : Kész van 🫡 June 6, 2025 at 12:52 PM, 윤성제(Yoon SungJe) : @MCS Hello, M7MFA300_P01,T704448 has not been coming for an hour. Can you check this? JOB has been created June 6, 2025 at 1:04 PM, 윤성제(Yoon SungJe) : @배병민 (Bae Byoungmin) 안녕하세요 pm님 지금 7라인1블럭 셀이 공급안되고있는데 확인 가능하실까요? 곧 라인 정지할 것 같습니다 job은 생성됐습니다 June 6, 2025 at 1:04 PM, 배병민 (Bae Byoungmin) : 네 확인 바로 해드리겠습니다 June 6, 2025 at 1:08 PM, duzzaman Md (MCS) : Cassette size for the carrier UNK-2506061142306 This is blocking the other carrier, T704448 June 6, 2025 at 1:11 PM, 윤성제(Yoon SungJe) : Team leader FA is checking. June 6, 2025 at 1:11 PM, duzzaman Md (MCS) : Cassette size missmatch June 6, 2025 at 1:24 PM, 배병민 (Bae Byoungmin) : 셀버퍼창고 브릿지에서 UNK(BCR 오류) 발생되어 공급에 차질이 있었습니다. 현재 조치 진항중입니다. June 6, 2025 at 1:24 PM, 배병민 (Bae Byoungmin) : 정상 진행되어 브릿지 이동중입니다 June 6, 2025 at 1:52 PM, duzzaman Md (MCS) : @FA KINDLY CHECK M0STK021_C01 Crane STK Action 5 min timeover error Thank you June 6, 2025 at 2:04 PM, Gerbovits Kevin : Solved June 6, 2025 at 3:06 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán line 3 finalon kérnék egy kis helpet 😁 June 6, 2025 at 3:09 PM, Denkó Jani (F.A.) : Photo June 6, 2025 at 3:09 PM, Denkó Jani (F.A.) : Megyünk June 6, 2025 at 3:14 PM, Gerbovits Kevin : Solved June 6, 2025 at 3:14 PM, Niki (Modul) : @Denkó Jani (F.A.) hátsó raktár gond June 6, 2025 at 3:15 PM, Denkó Jani (F.A.) : Photo June 6, 2025 at 3:37 PM, Ákos (Modul 2.E.) : Sziasztok 1es gép fólia csere elszakadt a másodikon June 6, 2025 at 3:37 PM, Denkó Jani (F.A.) : És ahhoz mi kellünk ,vagy menni fog? June 6, 2025 at 3:53 PM, Ákos (Modul 2.E.) : Köszönöm June 6, 2025 at 4:12 PM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 there is CRANE Fork Right Collapse detect 1 error. Thank you! June 6, 2025 at 4:14 PM, duzzaman Md (MCS) : Also, Please check M0STK037_C01 there is MCP 1F OP2 light curtain detected error . Thank you 😁 June 6, 2025 at 4:14 PM, Boromisza Zoltán : Boeing June 6, 2025 at 4:15 PM, Denkó Jani (F.A.) : Megyünk June 6, 2025 at 4:19 PM, duzzaman Md (MCS) : Kindly also check M0CNV035_RTV01 June 6, 2025 at 4:20 PM, Boromisza Zoltán : Solved June 6, 2025 at 4:25 PM, Denkó Jani (F.A.) : @duzzaman Md (MCS) Both errors are because Korean colleagues are inside the conveyor belt, checking sensors. June 6, 2025 at 4:25 PM, duzzaman Md (MCS) : Thank you for informing June 6, 2025 at 4:25 PM, Denkó Jani (F.A.) : Hogyne 🤝 June 6, 2025 at 5:25 PM, Niki (Modul) : @Denkó Jani (F.A.) 🙈 1es gép fóliázógép.... June 6, 2025 at 5:44 PM, Denkó Jani (F.A.) : Solved June 6, 2025 at 5:59 PM, FA CS AGV Jawad : Dear FA can you plz check STK 11, data mismatch error June 6, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 6, 2025 at 7:44 PM, Alexandra : 2f out lift floor in position error June 6, 2025 at 7:46 PM, Magosi Erik : @Csepi Árpád kérlek gyertek a hetes sorhoz. Mind a 3 material agv gerjed mert nem férnek el egymástól June 6, 2025 at 7:46 PM, Magosi Erik : Köszike June 6, 2025 at 7:46 PM, FA CS AGV Jawad : On my way June 6, 2025 at 7:49 PM, Magosi Erik : Thank You June 6, 2025 at 8:00 PM, FA CS AGV Jawad : Resolved June 6, 2025 at 8:08 PM, Magosi Erik : Thank You Sir June 6, 2025 at 8:35 PM, VK (mcs) : @FA Please check M0CNV 023 1F down stop time over error. June 6, 2025 at 8:49 PM, Csepi Árpád : Solved June 6, 2025 at 8:56 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.06 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 6, 2025 at 9:51 PM, Maczó Anikó : Sziasztok 2 emeleten Conveyor det error in lift June 6, 2025 at 10:00 PM, Csepi Árpád : Kész June 6, 2025 at 10:15 PM, FA CS AGV Jawad : Hi @FA..can someone plz help me at 1st F - CNV- 035 June 6, 2025 at 10:24 PM, Maczó Anikó : Sziasztok 2 emeleten hátul a raktárba nem megy be az anyag rá néznétek 83020 83019 June 6, 2025 at 10:42 PM, Édl Tamás : Kész June 6, 2025 at 11:00 PM, Maczó Anikó : Sziasztok 2f cv27 stop detect error Cv026 interface error June 7, 2025 at 4:20 AM June 7, 2025 at 4:20 AM, FA CS AGV Jawad : @Fa can you plz check STK 11, crane is stucked in buffer June 7, 2025 at 4:28 AM, Magosi Erik : @FA CS AGV Jawad can you come to Line7 module unloading? Unloading stopped midway on agv June 7, 2025 at 4:28 AM, Magosi Erik : Thank You June 7, 2025 at 4:33 AM, FA CS AGV Jawad : Coming June 7, 2025 at 4:38 AM, FA CS AGV Jawad : Solved June 7, 2025 at 4:48 AM, Magosi Erik : Thank You Sir June 7, 2025 at 4:49 AM, FA CS AGV Jawad : Anytime June 7, 2025 at 5:38 AM, Magosi Erik : @Csepi Árpád amennyiben van rá kapacítás gyertek ki légyszi felsőburkolat gantryhez a 7esen June 7, 2025 at 5:38 AM, Magosi Erik : Köszike June 7, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.07. 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Boromisza Zoltán, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(1): 김지수 June 7, 2025 at 6:50 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check M0CNV031_P11_BP01 stop detect error,it is blocking one job. Thank you very much! June 7, 2025 at 6:51 AM, Denkó Jani (F.A.) : Checking June 7, 2025 at 6:57 AM, Denkó Jani (F.A.) : Solved June 7, 2025 at 6:57 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 7:56 AM, Denkó Jani (F.A.) : @Mohammad Amir Cnv23 p44 The palette is not going to the warehouse at the port, please do something with it 🫡 June 7, 2025 at 7:57 AM, Mohammad Amir : Sure ,Checking. June 7, 2025 at 7:58 AM, Mohammad Amir : Issue has been resolved ✅. Carrier has started to move. I am monitoring. Thank you very much! June 7, 2025 at 7:59 AM, Denkó Jani (F.A.) : Köszike 🫶🏻 June 7, 2025 at 8:00 AM, Mohammad Amir : Szívesen! Feel free to contact me again if you face any further issues. June 7, 2025 at 8:02 AM, 윤성제(Yoon SungJe) : @MCS Hello, can you delete the JOB of M7MFA300_P18? This carrier should still be in the port. It seems that the operator made a mistake. June 7, 2025 at 8:02 AM, Mohammad Amir : Sure Sir, Checking June 7, 2025 at 8:02 AM, 윤성제(Yoon SungJe) : PS22A-2506030042 June 7, 2025 at 8:03 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 7, 2025 at 8:03 AM, 윤성제(Yoon SungJe) : Thank you. June 7, 2025 at 8:04 AM, Mohammad Amir : You are welcome! June 7, 2025 at 8:08 AM, Kovács Kármen : @Denkó Jani (F.A.) @Gerbovits Kevin line 7 unloadingnál elakadt a dunnage. Gyertek légyszi. Köszi June 7, 2025 at 8:08 AM, Denkó Jani (F.A.) : Megyünk June 7, 2025 at 8:21 AM, 윤성제(Yoon SungJe) : 7라인 원자재 2번 AGV OUT PORT에서 회전 중 충돌이 다수 발생중입니다 June 7, 2025 at 8:26 AM, KIM SEYEON [김세연]_FA : @FA CS AGV David 데이비드 please check June 7, 2025 at 8:30 AM, FA CS AGV David 데이비드 : It's a recurring issue that has been reported already. We are still waiting for the requested assistance June 7, 2025 at 8:31 AM, 윤성제(Yoon SungJe) : 지금 FA팀이 확인중인데 3번 AGV는 사용불가이고 2번AGV는 점검중이고 1번AGV로만 가동중입니다 June 7, 2025 at 8:41 AM, Duna Don : Solved June 7, 2025 at 8:42 AM, FA CS AGV David 데이비드 : AGV 2 is functioning normally now. The issue has been solved June 7, 2025 at 8:42 AM, 윤성제(Yoon SungJe) : 2번 AGV 점검 후 모니터링 중입니다 June 7, 2025 at 8:49 AM, 윤성제(Yoon SungJe) : @MCSCan you delete the JOB of M7MFA300_P02, P04 T704693, T704506? These two palettes are not in the port, and they are not in the AGV either. June 7, 2025 at 8:51 AM, Mohammad Amir : Sure Checking! June 7, 2025 at 8:54 AM, Mohammad Amir : Dear Sir, Currently these pallets are located at M0STK011_P13_BP01(T704506) and BP02(T704693) ,these have jobs to store in M0STK011. I will suggest not to cancel these jobs and let the pallet store in the STK011. Thank you very much! June 7, 2025 at 8:56 AM, 윤성제(Yoon SungJe) : 2번 AGV 정상가동중입니다 FA TEAM 도와주셔서 감사합니다 June 7, 2025 at 8:56 AM, 윤성제(Yoon SungJe) : Yes, I see, and thank you for the confirmation. June 7, 2025 at 8:57 AM, Mohammad Amir : You are welcome Sir. June 7, 2025 at 8:57 AM, Duna Don : You’re welcome June 7, 2025 at 10:38 AM, Kovács Kármen : Hello! #8 AGV Slam error_not on path end of line 8. Could someone check it? Thank you June 7, 2025 at 10:38 AM, FA CS AGV David 데이비드 : Coming June 7, 2025 at 11:14 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin line 7 végén az AGVn betöltés közben megakadt a a dunnage. Check pls. June 7, 2025 at 11:16 AM, Horváth Adriàn : Solved😁 June 7, 2025 at 11:17 AM, Denkó Jani (F.A.) : Photo June 7, 2025 at 11:53 AM, Niki (Modul) : @Denkó Jani (F.A.) 1es gép lift error June 7, 2025 at 11:55 AM, Ákos (Modul 2.E.) : Köszi Jani készen van June 7, 2025 at 12:02 PM, Denkó Jani (F.A.) : Szívesen,szívem lelkem a temán 🙄🫡😂 June 7, 2025 at 12:18 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin Line 4 papír hulladékos port nem üzemel. Nem tudjuk elküldeni a cumot és bekérni üreset. Check please. June 7, 2025 at 12:19 PM, Denkó Jani (F.A.) : Meg lessük 🫡 June 7, 2025 at 3:01 PM, Kovács Kármen : @Denkó Jani (F.A.) @Gerbovits Kevin emeleten a magasraktár hibában áll June 7, 2025 at 3:04 PM, Denkó Jani (F.A.) : Megyünk June 7, 2025 at 3:13 PM, Denkó Jani (F.A.) : 🗡️ KÉSZ June 7, 2025 at 4:55 PM, Horváth Adriàn : @Denkó Jani (F.A.) emeleten a 8as AGV megfeküdt a kanyarba. Check pls June 7, 2025 at 4:56 PM, FA CS AGV David 데이비드 : Checking June 7, 2025 at 4:58 PM, Horváth Adriàn : Solved June 7, 2025 at 4:58 PM, FA CS AGV David 데이비드 : Thank you June 7, 2025 at 5:44 PM, Niki (Modul) : @Denkó Jani (F.A.) lift error 1gép June 7, 2025 at 5:46 PM, Denkó Jani (F.A.) : Photo June 7, 2025 at 5:46 PM, Denkó Jani (F.A.) : Skipp 🙄😂 June 7, 2025 at 6:03 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+2: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 7, 2025 at 6:10 PM, VK (mcs) : @FA Good evening Please check 1F M0CNV023_LF 31 Lift remember memory NG error. June 7, 2025 at 10:01 PM, Maczó Anikó : Sziasztok 2f az 1-es gépnél a lift nem működik köszönöm June 7, 2025 at 10:14 PM, Csepi Árpád : Solved June 7, 2025 at 10:24 PM, Maczó Anikó : Sziasztok 2f a raktárba vinyog valami de hibát nem jelez rá tudnátok nézni léci Köszönöm June 7, 2025 at 11:51 PM, FA CS AGV Jawad : @Csepi Árpád can you plz help at STK 11...datamismatch June 7, 2025 at 11:53 PM, VK (mcs) : @FA Please check M0STK023 Crane unload timeout error. June 8, 2025 at 12:04 AM June 8, 2025 at 12:04 AM, Brázik János : Solved June 8, 2025 at 12:34 AM, Magosi Erik : @FA CS AGV Jawad csn You come to Line7 module unloading? Unloading stopped midway June 8, 2025 at 12:34 AM, Magosi Erik : Thank You June 8, 2025 at 12:42 AM, FA CS AGV Jawad : Solved June 8, 2025 at 12:42 AM, Magosi Erik : Thank You Sir June 8, 2025 at 12:44 AM, FA CS AGV Jawad : Anytime June 8, 2025 at 6:11 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.08. 8+3+1/12+1 Tech, 1Sl, 1Sup. Overtime(3): Szabadi Miklós, Marsi Gábor, Harasztia Zoltán Holiday(1+1): Gerbovits Kevin, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(1): Böröczki Balázs --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Marsi Gábor --------------- Assy GF (3): Csanálosi Gábor, Denkó János, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes ---------- June 8, 2025 at 6:37 AM, Kovács Kármen : Sziasztok! Line 7 LWR case gantryhez szükségünk lenne segítségre. Kicsit megbolondult a rendszer... @Denkó Jani (F.A.) June 8, 2025 at 6:41 AM, Denkó Jani (F.A.) : Szép jó reggelt. Ma csak akkor megyek a modulra ha nagyon nagy baj lesz és erősítés kell.🙄😂 @Boromisza Zoltán @Zoltán Harasztia FA ma a kirendelt alvállalkozóim 💪🏻😎 őket legyetek kedvesek keresni hiba esetén 😇 June 8, 2025 at 6:43 AM, Zoltán Harasztia FA : Hamarosan érkezünk, már úton vagyunk a modulra June 8, 2025 at 6:43 AM, Kovács Kármen : This message was deleted. June 8, 2025 at 6:43 AM, Denkó Jani (F.A.) : Az baj 🫣 June 8, 2025 at 6:44 AM, Kovács Kármen : Hát épp saját magá akarta lebontani June 8, 2025 at 6:44 AM, Kovács Kármen : Oksa June 8, 2025 at 7:17 AM, Boromisza Zoltán : Kész June 8, 2025 at 8:35 AM, Kurkó Péter : Hello line7 elejénél 2db AGV egymásnak ment valaki nézze meg köszi June 8, 2025 at 8:35 AM, FA CS AGV David 데이비드 : Coming June 8, 2025 at 8:44 AM, FA CS AGV David 데이비드 : Solved June 8, 2025 at 9:52 AM, Niki (Modul) : Sziasztok @Boromisza Zoltán valaki rá tudna nézni a fóliázógépre? Nem megint nem vágta el a fóliát,de a gép nem tutul,viszont joo darabig elhúzta! Köszike 😊 June 8, 2025 at 10:26 AM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx 9 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. June 8, 2025 at 10:27 AM, Boromisza Zoltán : Megyek kész June 8, 2025 at 10:43 AM, Shakir (MCS) : There is only 5 pallet available with W00** full which has been released. W000100 W000104 W000105 W000232 W000233 Thank you June 8, 2025 at 10:46 AM, 윤경환 : Thank you.👍 June 8, 2025 at 12:02 PM, Horváth Adriàn : @Boromisza Zoltán Gyere line 3 végére pls June 8, 2025 at 12:07 PM, Horváth Adriàn : Megoldva. June 8, 2025 at 12:08 PM, Boromisza Zoltán : Köszi June 8, 2025 at 1:48 PM, Kurkó Péter : Helló Line7 nél 2 AGV igen közel van egymáshoz valaki csinálja meg köszi June 8, 2025 at 1:48 PM, Kurkó Péter : 1f June 8, 2025 at 1:48 PM, FA CS AGV David 데이비드 : Coming June 8, 2025 at 3:08 PM, Kurkó Péter : Hello line7 en a a felsőburkolat gantryre valaki nézzen rá köszi June 8, 2025 at 3:08 PM, Zoltán Harasztia FA : Megyek June 8, 2025 at 3:58 PM, Bozó Gyula : @Boromisza Zoltán kérhetek segítséget az OQC porthoz? Nem viszi vissza a raktárba a modulokat! June 8, 2025 at 3:59 PM, Boromisza Zoltán : Megyek June 8, 2025 at 4:35 PM, Boromisza Zoltán : @Shakir (MCS) I would like help from port M0OQC001_P01. Pallet U023767 should be given a work order to be transported back to the warehouse. June 8, 2025 at 4:40 PM, Shakir (MCS) : Issue has been resolved now AGV08 assigned and on the way Thank you June 8, 2025 at 4:41 PM, Boromisza Zoltán : Thank you June 8, 2025 at 4:41 PM, Shakir (MCS) : You’re welcome June 8, 2025 at 5:19 PM, Zoltán Harasztia FA : @ mcs Hi, could you help me? I need to delete two jobs in M0STK011. June 8, 2025 at 5:19 PM, Mohammad Amir : Sure ,share the carrier id. June 8, 2025 at 5:20 PM, Zoltán Harasztia FA : Sorry S000776 Z101062 June 8, 2025 at 5:20 PM, Mohammad Amir : Working on it. Thank you very much! June 8, 2025 at 5:21 PM, Mohammad Amir : Jobs have been cancelled successfully ✅. Feel free to reach out to us if you need further assistance. Thank you very much! June 8, 2025 at 5:22 PM, Zoltán Harasztia FA : Thank you very much June 8, 2025 at 5:23 PM, Mohammad Amir : Nagyon Szívesen! June 8, 2025 at 5:58 PM, FA CS AGV Jawad : @Mohammad Amir bhae can you plz reassign job to AGV 16 to STK 13, is it possible..? June 8, 2025 at 6:00 PM, Mohammad Amir : Sure , checking! June 8, 2025 at 6:02 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.08 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 8, 2025 at 6:05 PM, Mohammad Amir : Issue has been resolved ✅. AGV#16 on the way with carrier to STK013. Thank you very much! June 8, 2025 at 6:05 PM, FA CS AGV Jawad : Thanks June 8, 2025 at 6:05 PM, Mohammad Amir : You are welcome! June 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 3 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+3: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 8, 2025 at 6:27 PM, FA CS AGV Jawad : @Mohammad Amir bhae you plz check currently is there job exists for box packing ? June 8, 2025 at 6:30 PM, Mohammad Amir : There was an issue with last job . Coudk you please press LR again. Thank you very much! June 8, 2025 at 6:30 PM, FA CS AGV Jawad : Got it. Thanks June 8, 2025 at 6:31 PM, Mohammad Amir : Thank you very much! June 8, 2025 at 8:20 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK025_C01 there is CRANE FORK Right wide#1 check error. Thank you very much! June 8, 2025 at 8:40 PM, Csepi Árpád : Solved June 8, 2025 at 8:41 PM, Mohammad Amir : Köszönöm szepen 🙏. June 8, 2025 at 8:43 PM, Mohammad Amir : Announcement in Boards: Photo June 8, 2025 at 9:58 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK026_C01 there is Double cargo errors. Thank you very much! June 8, 2025 at 10:01 PM, Csepi Árpád : Solved June 8, 2025 at 10:02 PM, Mohammad Amir : Thank you very much! June 8, 2025 at 10:27 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK027_C01 there is CRANE FORK collapse Detect 1 error. Thank you very much! June 8, 2025 at 10:49 PM, Csepi Árpád : Solved June 8, 2025 at 10:50 PM, Mohammad Amir : Köszönöm szepen 🙏 June 8, 2025 at 10:50 PM, Csepi Árpád : Szívesen🙂 June 9, 2025 at 2:35 AM June 9, 2025 at 2:35 AM, FA CS AGV Jawad : @Csepi Árpád can you plz help at STK 11 data mismatch error June 9, 2025 at 2:56 AM, 정지윤 left this chatroom. June 9, 2025 at 3:02 AM, Csepi Árpád : After manually resetting the crane to its default position, it operates again in automatic mode. June 9, 2025 at 3:07 AM, FA CS AGV Jawad : Thanks June 9, 2025 at 6:13 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 15 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 2 ———————————— Electrode (4) Marsi Gábor Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(3 Böröcki Balázs Fabricius Gergő Nagy Tamás ———————————— Assembly GF(4) Csuti Zoltán Gégény Dávid Kertész Dani Lajos Gábor ———————————— Formation/Modul(4) Boromisza Zoltán Döme György Harasztia Zoli Sarvajcz Ferenc June 9, 2025 at 8:32 AM, FACS_JaewonShin : ■ 9th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - Mechanic 1 Oh changhoon - PLC control 3 Kim bareum Jin jaejeong Kim sangtae June 9, 2025 at 8:55 AM, Shakir (MCS) : @FA Please check M0STK037_P11 is OOS, Job is getting delayed. Thank you June 9, 2025 at 8:56 AM, Döme György F.A : Checking June 9, 2025 at 9:03 AM, Döme György F.A : Solved June 9, 2025 at 9:29 AM, Shakir (MCS) : @FA Please check M0STK024_C01 there is CRANE FORK right collapse Detect 3 error. Thank you June 9, 2025 at 9:29 AM, Zoltán Harasztia FA : Cheking June 9, 2025 at 9:37 AM, Zoltán Harasztia FA : Solved June 9, 2025 at 10:59 AM, 윤경환 : @배병민 (Bae Byoungmin) 피엠님 안녕하세요. 모듈 자동화 창고 폐기물 빈 팔렛 투입 하려 하는데 CCS에서 데이터 변경 란이 없어지고 IO monitoring이 생겼는데 뭔가 업데이트가 된걸까요? June 9, 2025 at 11:03 AM, 배병민 (Bae Byoungmin) : 안녕하세요 조장님 CIM에서 별도 업데이트나 변경사항등은 없었습니다. 현재 투입이 불가한 상황인건가요? June 9, 2025 at 11:24 AM, 윤경환 : 네 데이터를 수정해야 RTV가 작동 하는데 RTV 직전까지만 팔렛이 이동 되서요. June 9, 2025 at 12:02 PM, Ági : Sziasztok 2.emelet Stop detect error June 9, 2025 at 12:03 PM, Döme György F.A : Megyünk June 9, 2025 at 12:13 PM, 윤경환 : This message was deleted. June 9, 2025 at 12:14 PM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx 2 pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. June 9, 2025 at 12:18 PM, Sazzad Bhai SKon : Sent June 9, 2025 at 12:19 PM, 윤경환 : Thank you for your support.👍 June 9, 2025 at 1:55 PM, András : 2f floor position error and 1F down slow time error June 9, 2025 at 1:56 PM, Boromisza Zoltán : Megyek June 9, 2025 at 1:57 PM, András : Köszi 😉 June 9, 2025 at 2:04 PM, Boromisza Zoltán : Kész June 9, 2025 at 2:24 PM, Shakir (MCS) : @FA Please check M0CNV036_LF01 , conveyor L slow error. Thank you June 9, 2025 at 2:27 PM, Döme György F.A : We are currently working here. June 9, 2025 at 4:19 PM, Döme György F.A : @Shakir (MCS) Could you please check why no material is arriving at the M7MFA300-P03 port? Thank you! June 9, 2025 at 4:24 PM, Shakir (MCS) : Issue has been resolved AGV04 assigned on the way Thank you June 9, 2025 at 4:32 PM, Döme György F.A : Yes, I can see that material has arrived there as well as at the P01 port. Thank you! June 9, 2025 at 5:00 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK024_P22 Please check. It looks like the Empty palette is stopped. The ID of the material is PS22A-2506030012. Jop is generated and is delayed. June 9, 2025 at 5:02 PM, Döme György F.A : Checking June 9, 2025 at 5:03 PM, Shakir (MCS) : Please check P22 is OOS June 9, 2025 at 5:03 PM, Shakir (MCS) : @fA June 9, 2025 at 5:07 PM, Shakir (MCS) : @FA Please check M0CNV023_RTV RTV car distance sensor time delay. Thank you June 9, 2025 at 5:09 PM, Döme György F.A : Yes. We were here. June 9, 2025 at 5:10 PM, Döme György F.A : Solved June 9, 2025 at 5:11 PM, 승규 (BAEK SEUNGGYU) : Thank you! June 9, 2025 at 5:53 PM, FA-CS-AGV-Masoud : @FA Please check M0STK014_P09 Travel x distance safety error June 9, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13+2 Overtime Overtime (2):Csanálosi Gábor, Bonnyai Ákos Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Bonnyai Ákos, Csanálosi Gábor Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 9, 2025 at 8:04 PM, 승규 (BAEK SEUNGGYU) : @FA Please check Cell buffer AGV number 12. ACS Alam. June 9, 2025 at 8:04 PM, FA-CS-AGV-Masoud : Coming June 9, 2025 at 8:09 PM, FA-CS-AGV-Masoud : Solved June 9, 2025 at 9:47 PM, N.Gábor F.A. : @MCS Hello I would like to request the job cancellation of this palette PS210-2505140021 June 9, 2025 at 9:49 PM, VK (mcs) : Job cancelled June 9, 2025 at 9:49 PM, N.Gábor F.A. : Thank you June 9, 2025 at 11:41 PM, N.Gábor F.A. : @VK (mcs) Hello Could you send me this palette to port M0CNV036_M02? Z101181 thank you June 9, 2025 at 11:44 PM, VK (mcs) : Transfer command created June 9, 2025 at 11:47 PM, N.Gábor F.A. : Thank you June 9, 2025 at 11:48 PM, VK (mcs) : Anytime June 10, 2025 at 4:21 AM June 10, 2025 at 4:21 AM, N.Gábor F.A. : @VK (mcs) Hello Could you please send this pallet back to the warehouse? Z101181 Currently it is M0CNV036_M01. Thank you. June 10, 2025 at 4:22 AM, VK (mcs) : Location in MCS is NA June 10, 2025 at 4:26 AM, N.Gábor F.A. : It was successfully scanned, now it's headed to the warehouse June 10, 2025 at 4:27 AM, VK (mcs) : Yes thank you June 10, 2025 at 6:07 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Pálosi Róbert Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Nagy Tamás Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Kertész Dani Lajos Gábor Skwarek Tibor ———————————— Formation/Modul(2) Döme György Harasztia Zoli June 10, 2025 at 7:15 AM, FA/CS/AGV_ Asjad : @FA Please check M0STK011 - C/V Data Miss match Nothing error Thanks June 10, 2025 at 7:16 AM, Zoltán Harasztia FA : Cheking June 10, 2025 at 10:48 AM, Döme György F.A : @MCS Could you please help? The pickup command for port M7MFA300_P02 needs to be deleted. The T702803 pallet has been put back into the machine, so the port is now empty, but different AGVs keep coming for it. June 10, 2025 at 10:53 AM, duzzaman Md (MCS) : Done June 10, 2025 at 10:54 AM, Döme György F.A : Yes I see.Thank you very much! June 10, 2025 at 12:56 PM, Ági : Sziasztok 2f GF stop time over June 10, 2025 at 12:57 PM, Döme György F.A : Megyek June 10, 2025 at 1:05 PM, Döme György F.A : Kész June 10, 2025 at 1:05 PM, András : Köszi 😉 June 10, 2025 at 1:13 PM, duzzaman Md (MCS) : @FA M0STK023_C01: MCP 2F OP1 Light curtain detect error Thank you June 10, 2025 at 1:14 PM, Zoltán Harasztia FA : Cheking June 10, 2025 at 1:30 PM, Zoltán Harasztia FA : Solved June 10, 2025 at 2:00 PM, Roland : Hello. Can you check M0CNV021 and M0CNV022 warehouse, please? We cant warehouse right now. Thank you June 10, 2025 at 2:00 PM, Döme György F.A : Megyünk June 10, 2025 at 4:04 PM, 승규 (BAEK SEUNGGYU) : @FA M3MFA300_P19 Lower case box is broken. I need help. June 10, 2025 at 4:08 PM, Döme György F.A : Coming June 10, 2025 at 6:07 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 10, 2025 at 8:52 PM, Mohammad Amir : @FA @Dávid F.A. Please check M7MFA300_P32 it is OOS and because of this one job is pending for 58 minutes. Thank you very much! June 10, 2025 at 9:08 PM, N.Gábor F.A. : Hello I asked the shift leader on duty, there is no need for material at the moment, please delete the job here June 10, 2025 at 9:08 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. June 10, 2025 at 9:09 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300_P02 CELL is being delayed. It doesn't come from M0STK014. carrier ID T703280. June 10, 2025 at 9:09 PM, Mohammad Amir : Thank you very much for the confirmation. Job has been cancelled successfully ✅. June 10, 2025 at 9:10 PM, Mohammad Amir : Checking June 10, 2025 at 9:10 PM, N.Gábor F.A. : Your welcome June 10, 2025 at 9:17 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check T703280 is located at M0STK014(0201502) it has job to go to module line -4P02,it is not moving since 20:12. Everything is good from MCS RTD side ✅. Please check physically,job is in Queued status however currently STK014 has just two jobs including this one. Other one also getting delayed. Thank you very much! June 10, 2025 at 9:18 PM, N.Gábor F.A. : Okay, checking June 10, 2025 at 9:18 PM, Mohammad Amir : Köszönöm szepen 🙏 June 10, 2025 at 9:26 PM, N.Gábor F.A. : The problem was caused by data remaining on the port, so the warehouse could not work on the specified port, which is why the delivery did not take place. The problem has been resolved. The material has been shipped. June 10, 2025 at 9:31 PM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK035_P14 there is DIV Pallet Detect Error,several jobs are Alternated. Thank you very much! June 10, 2025 at 9:32 PM, Mohammad Amir : C01:-Crane fork Left Collapseed error. Please also check this one as well. Thank you very much! June 10, 2025 at 10:38 PM, Mohammad Amir : @FA @Dávid F.A. M0STK035_C01:-Crane fork Left Collapseed error. Please also check this one as well. Thank you very much! June 10, 2025 at 10:42 PM, FACS_TaehyeongJin : Solved June 10, 2025 at 10:43 PM, Mohammad Amir : Thank you very much! June 11, 2025 at 12:37 AM June 11, 2025 at 12:37 AM, Mohammad Amir : @FA @Dávid F.A. M0STK035_C01:-Crane fork Left Collapseed error. Please also check this. Thank you very much! June 11, 2025 at 4:43 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK012_P09 PIO interface error June 11, 2025 at 4:44 AM, N.Gábor F.A. : Okay June 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.11. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 11, 2025 at 7:21 AM, 윤성제(Yoon SungJe) : @mcs Hello, can you delete the JOB of M4MFA300_P27, PF221-2505230008? The facility seems to have malfunctioned. June 11, 2025 at 7:26 AM, duzzaman Md (MCS) : Deleted already June 11, 2025 at 7:28 AM, 윤성제(Yoon SungJe) : Thank you so much. June 11, 2025 at 7:30 AM, Kurkó Péter : Hello valaki nézzen rá a line7 felsőburkolat gantryre köszi Y1-2+ limit error June 11, 2025 at 7:36 AM, Boromisza Zoltán : Úton June 11, 2025 at 7:41 AM, Denkó Jani (F.A.) : Solved June 11, 2025 at 8:01 AM, Kurkó Péter : Hello 1F Line7 AGV2 not working pls check thx June 11, 2025 at 8:01 AM, FA/CS/AGV_ Asjad : Coming June 11, 2025 at 8:04 AM, FA/CS/AGV_ Asjad : Fixed June 11, 2025 at 9:43 AM, duzzaman Md (MCS) : @Fa Kindly check MOSTK014_P11 HOME RETURN FAIL ERROR June 11, 2025 at 9:48 AM, Boromisza Zoltán : Okey June 11, 2025 at 9:58 AM, Boromisza Zoltán : Solved June 11, 2025 at 10:52 AM, duzzaman Md (MCS) : @FA Please check M0STK025_C01 there is CRANE FORK left collapse detect 1 error. Thank you June 11, 2025 at 10:58 AM, Gerbovits Kevin : Going June 11, 2025 at 11:12 AM, Gerbovits Kevin : Solved June 11, 2025 at 12:53 PM, Roland : Hello M0STK024 - Crane Fork left Collapse error. Can you check it, please? Thank you June 11, 2025 at 12:53 PM, Boromisza Zoltán : Megyünk June 11, 2025 at 12:56 PM, Boromisza Zoltán : Kész June 11, 2025 at 12:58 PM, 윤성제(Yoon SungJe) : @FA @MCS 안녕하세요 M7MFA300_P29 BCR은 읽히는데 JOB생성이 되지 않습니다 확인 해 주실수 있을까요? June 11, 2025 at 12:59 PM, FACS_JaewonShin : 현장으로 가겠습니다 June 11, 2025 at 1:03 PM, Horváth Adriàn : @Boromisza Zoltán @Gerbovits Kevin @Denkó Jani (F.A.) lehet màr tudtok róla de a csomagoló sor elött leparkolt egy AGV ami fogja az összes többit is. June 11, 2025 at 1:04 PM, Duna Don : Checking June 11, 2025 at 1:06 PM, Duna Don : Solved, Thank you! June 11, 2025 at 1:08 PM, FACS_JaewonShin : @mcs M7MFA300_29 Unload request has been on but no job in there, could you check that? June 11, 2025 at 1:12 PM, duzzaman Md (MCS) : Carrier location missmatch. PS230-2506030109 Its currently on M0MGV046_VC03 June 11, 2025 at 1:13 PM, FACS_JaewonShin : It is on p29 now could you move that? June 11, 2025 at 1:17 PM, duzzaman Md (MCS) : Checking on it. Please reconfirm. Then we will update the location June 11, 2025 at 1:17 PM, FACS_JaewonShin : P29 unload requested few seconds ago June 11, 2025 at 1:18 PM, duzzaman Md (MCS) : Still the same error. Please reconfirm the physical location of the carrier June 11, 2025 at 1:19 PM, FACS_JaewonShin : Which means vc3? June 11, 2025 at 1:20 PM, duzzaman Md (MCS) : According to MCS, PS230-2506030109 Its currently on M0MGV046_VC03 You mentioned its on P29. So, cross checking with you about the physical location. June 11, 2025 at 1:21 PM, FACS_JaewonShin : I am on line7 in front of p29, it is in p29 June 11, 2025 at 1:22 PM, duzzaman Md (MCS) : Please raise UR now June 11, 2025 at 1:26 PM, 윤성제(Yoon SungJe) : I did UR now but still didn't create JOB. Do this carrier need to be in VC03? June 11, 2025 at 1:27 PM, duzzaman Md (MCS) : One more time please June 11, 2025 at 1:28 PM, Kurkó Péter : Hello line7 nél 2 AGV nagyon szereti egymást, valaki nézzen rá mert jobb lenne ha dolgoznának Köszi June 11, 2025 at 1:28 PM, FACS_JaewonShin : It is removed manually. When we do unload this, we will leave the message June 11, 2025 at 1:28 PM, FA/CS/AGV_ Asjad : Coming June 11, 2025 at 1:29 PM, 윤성제(Yoon SungJe) : Please wait a little bit. I'm sorry. I sent another one first because I was pushed back by another carrier. June 11, 2025 at 1:30 PM, duzzaman Md (MCS) : Okay, thank you. Please inform us if it doesn't work next time June 11, 2025 at 1:34 PM, FA/CS/AGV_ Asjad : Solved June 11, 2025 at 1:34 PM, 윤성제(Yoon SungJe) : I will send the UR now. June 11, 2025 at 1:36 PM, duzzaman Md (MCS) : UR was successful June 11, 2025 at 1:36 PM, 윤성제(Yoon SungJe) : JOB has been created. Thank you for your help. June 11, 2025 at 1:48 PM, FA/CS/AGV_ Asjad : @FA Please check M0STK011 - C/V Data Mis Match error Thanks June 11, 2025 at 1:54 PM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 ‘Crane fork left wide#1 check error.' June 11, 2025 at 1:55 PM, duzzaman Md (MCS) : Also please check M0STK012 ŹP07/08/21/22 They are OOS June 11, 2025 at 1:56 PM, Boromisza Zoltán : Boeing 😂😂 June 11, 2025 at 2:02 PM, Duna Don : @Boromisza Zoltán could you please check this? Thank you! June 11, 2025 at 2:03 PM, Boromisza Zoltán : Boeing 😆😆 June 11, 2025 at 2:04 PM, Gerbovits Kevin : Going June 11, 2025 at 2:12 PM, Boromisza Zoltán : Solved June 11, 2025 at 2:12 PM, Boromisza Zoltán : Solved June 11, 2025 at 2:14 PM, duzzaman Md (MCS) : Kindly check M0STK014_P10,too. It's OOS and there's active job for it. Thank you 🫡 June 11, 2025 at 2:16 PM, Boromisza Zoltán : Solved June 11, 2025 at 2:38 PM, Gerbovits Kevin : Solved June 11, 2025 at 2:55 PM, Niki (Modul) : @Boromisza Zoltán gond van a fóliázógépnél,megint nem vágta el! June 11, 2025 at 2:58 PM, Niki (Modul) : Lift nem jó,ha feljöttök! June 11, 2025 at 3:12 PM, duzzaman Md (MCS) : @FA Please check M0CNV023-35_028 Wrapper heater temp alarm. June 11, 2025 at 3:15 PM, Gerbovits Kevin : Going June 11, 2025 at 4:05 PM, Niki (Modul) : @Boromisza Zoltán még mindig esik a hőfok June 11, 2025 at 4:12 PM, Gabor(priv) : In module 1f end of line8 agv no8 stopped with SLAM_ERROR_NOT_ON_PATH alarm. Please check it June 11, 2025 at 4:12 PM, Gabor(priv) : Thanks! June 11, 2025 at 4:13 PM, FA/CS/AGV_ Asjad : coming June 11, 2025 at 4:15 PM, FA/CS/AGV_ Asjad : Fixed June 11, 2025 at 4:51 PM, Boromisza Zoltán : Kész June 11, 2025 at 5:20 PM, Kurkó Péter : Hello valaki nézzen rá a felsőburkolan gantryre a line7 en köszi June 11, 2025 at 5:20 PM, Kurkó Péter : Axis y1,y2 limit error June 11, 2025 at 5:29 PM, 승규 (BAEK SEUNGGYU) : @FA M7MFA300_P19 Please check. Axis #1,2 Limit Error June 11, 2025 at 5:33 PM, Boromisza Zoltán : Megyünk June 11, 2025 at 5:36 PM, 승규 (BAEK SEUNGGYU) : I wrote it wrong. It's P17. June 11, 2025 at 5:47 PM, Gerbovits Kevin : Solved June 11, 2025 at 6:04 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— June 11, 2025 at 6:24 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.11 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 11, 2025 at 7:21 PM, VK (mcs) : @FA Please check 1F M0CNV036 -P14/BF01 Stop detect error. June 11, 2025 at 7:22 PM, FACS_Hyeongi Son : Cargo without data comes in Is it possible to check? June 11, 2025 at 7:28 PM, VK (mcs) : As I checked, in MCS we received all information.and everything is fine from MCS side. June 11, 2025 at 8:00 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS_team, MCS/RTD M0STK031 location : 0202001 carrier id : U025775 배병민pm님 해당제품 명일 사외창고 이관품입니다, RTD/MCS상에서 제품 검색이 되지 않습니다. SCS상에서는 위와 같은 내용으로 적치 되어 있는것으로 확인 되었습니다. 이전에도 동일건으로 상위에서 왜 누락 되는지 확인 부탁드리며, 해당제품은 M0CNV033_M03 포트로 수동 배출 부탁드립니다 June 11, 2025 at 8:00 PM, FACS_Hyeongi Son : 넵 수동배출 하겠습니다 June 11, 2025 at 8:04 PM, FACS_Hyeongi Son : 반송중입니다 June 11, 2025 at 8:24 PM, VK (mcs) : According to MCS U025775 29th May at 7:29 job created from M1MFA300_P05 to M0STK031. Carrier transfers by AGV 9 and stored at shelf (0202001). It seems there was some misinformation in ACS, due to an error during transition.because after transfer completed, MCS still received command from ACS. 05.31 at 22:56:14 we received carrier data removed report. June 11, 2025 at 9:04 PM, SKOH2/제조-셀,모듈 출하/김병호 : Why does Carrier data keep being removed? June 11, 2025 at 9:24 PM, VK (mcs) : It seems due to an error in AGV, information didn’t received properly and it was remained in machine. M1MFA300. Because we received job terminated report 29th May at 7:41 from ACS And carrier data remove report 31d May at 22:56 from M1MFA300. June 12, 2025 at 12:01 AM June 12, 2025 at 12:01 AM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M0STK014_P08 PIO interface error June 12, 2025 at 12:04 AM, Magosi Erik : @FA-CS-AGV-Masoud material agv’s in eachother way on Line3-4. Please check June 12, 2025 at 12:04 AM, Magosi Erik : Thank You June 12, 2025 at 12:10 AM, FA-CS-AGV-Masoud : On the way June 12, 2025 at 12:13 AM, FA-CS-AGV-Masoud : Solved June 12, 2025 at 12:34 AM, FA-CS-AGV-Masoud : @Édl Tamás June 12, 2025 at 12:37 AM, Magosi Erik : Thank You Sir June 12, 2025 at 12:44 AM, Csepi Árpád : Solved June 12, 2025 at 12:59 AM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M0STK012_P09 C/V light curtain detect June 12, 2025 at 1:23 AM, Csepi Árpád : Solved June 12, 2025 at 1:43 AM, Sánta László : Sziasztok! Modul Line 7 block egyből nem viszi el az üres raklapot az AGV, ami miatt meg fog állni a block. Illetve egy AGV el is van akadva, lehet, hogy pont ez lenne a felelős érte. Nézzétek meg légyszi. Köszönöm! June 12, 2025 at 1:43 AM, FA-CS-AGV-Masoud : On the way June 12, 2025 at 1:44 AM, Sánta László : Ugyanitt Endplate-nél is gond van az egyik kis AGV-vel. June 12, 2025 at 1:44 AM, Sánta László : Köszönöm June 12, 2025 at 2:03 AM, Alexandra : 2f cv037 stop detect error June 12, 2025 at 2:17 AM, FA-CS-AGV-Masoud : The delay was caused by an issue with one of the AGVs failing to find its path. The problem was resolved by removing the AGV from the route. Monitoring of this issue will continue. Thank you for your patience. June 12, 2025 at 2:18 AM, Sánta László : Thank you very much for your help, sir! June 12, 2025 at 3:32 AM, VK (mcs) : @FA Please check 2F M0STK023 Crane fork left collapse detect 1 June 12, 2025 at 4:02 AM, Csepi Árpád : Solved June 12, 2025 at 4:37 AM, VK (mcs) : @FA Please check 2F M0STK023 MCP 2F OP1 light curtain detect error. June 12, 2025 at 4:53 AM, Sánta László : Szükségem lenne segítségre a Line7 lower case gantry-hez, Transfer Loading Incomplete Error hibához. Köszönöm! June 12, 2025 at 4:59 AM, Csepi Árpád : Solved June 12, 2025 at 5:01 AM, Magosi Erik : @Csepi Árpád nem jön üres dunnage a 3as sorra. Magasraktár hibában áll June 12, 2025 at 5:01 AM, Magosi Erik : Kérlek csekkolj rá June 12, 2025 at 5:01 AM, Magosi Erik : Köszike June 12, 2025 at 5:27 AM, VK (mcs) : @FA Please check GF M0STK032-P01 It's out of service June 12, 2025 at 5:29 AM, Csepi Árpád : Solved June 12, 2025 at 5:32 AM, Csepi Árpád : Solved June 12, 2025 at 5:38 AM, Sánta László : Köszönöm szépen! June 12, 2025 at 6:07 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.12. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 12, 2025 at 6:39 AM, Shakir (MCS) : @FA Good Morning @Boromisza Zoltán Please check M0STK011_P12, CV Data mismatch error. M0STK011_C01: Crane fork right over run detect Thank you June 12, 2025 at 6:39 AM, Boromisza Zoltán : Okey June 12, 2025 at 6:48 AM, Boromisza Zoltán : Solved June 12, 2025 at 7:22 AM, Shakir (MCS) : @FA Please check M0STK033_P14 is OOS. Thank you June 12, 2025 at 7:22 AM, Boromisza Zoltán : Okey June 12, 2025 at 7:39 AM, Boromisza Zoltán : Solved June 12, 2025 at 7:59 AM, Shakir (MCS) : @FA Please check M0STK021_C01 there is CRANE FORK right collapse detect 1 error. Thank you June 12, 2025 at 8:10 AM, Boromisza Zoltán : Okey June 12, 2025 at 8:17 AM, Gerbovits Kevin : Solved June 12, 2025 at 8:23 AM, Roland : Sziasztok! M0STK021_P01 portom megallt az anyag, amit kiengedtem, nem dobott ki semmi hibat. Megneznetek kerlek? Koszonom June 12, 2025 at 8:23 AM, Denkó Jani (F.A.) : Mindjárt megyünk June 12, 2025 at 8:32 AM, Denkó Jani (F.A.) : Solved June 12, 2025 at 9:34 AM, 윤성제(Yoon SungJe) : @MCS Hello, PS22A-2506030070 M7MFA300_P34 materials have not been coming down for more than an hour. Can you check? June 12, 2025 at 9:37 AM, Shakir (MCS) : Carrier on the way, witnessed delay because warehouse was OOS. Now carrier moving Thank you June 12, 2025 at 9:52 AM, 윤성제(Yoon SungJe) : Thank you so much for your help, and the carrier has arrived now. June 12, 2025 at 9:53 AM, Shakir (MCS) : You’re welcome June 12, 2025 at 11:09 AM, Roland : M0STK024 - Double Cargo error. Megtudnatok nezni, kerlek? Koszonom June 12, 2025 at 11:09 AM, Boromisza Zoltán : Megyek June 12, 2025 at 11:18 AM, Boromisza Zoltán : Kész June 12, 2025 at 11:27 AM, 이민영(Minyoung Lee) : Please check quickly as AGV is not coming to Out cell pallet on 7line June 12, 2025 at 11:27 AM, FA/CS/AGV/Taimur : Checking June 12, 2025 at 11:33 AM, 윤성제(Yoon SungJe) : @MCS Can you check why T702863 and T702922 of M7MFA300_P02 and P4 are on standby? June 12, 2025 at 11:37 AM, Shakir (MCS) : @Fa Please check M0STK023_C01, Crane fork right wide error. Thank you June 12, 2025 at 11:40 AM, FA/CS/AGV/Taimur : @MCS can you please create UR for this line on 1F line 7, module side. Thank you June 12, 2025 at 11:41 AM, Shakir (MCS) : Port? June 12, 2025 at 11:42 AM, FA/CS/AGV/Taimur : M7MFA300_P04 June 12, 2025 at 11:43 AM, 이민영(Minyoung Lee) : @윤성제(Yoon SungJe) 확인 좀요 June 12, 2025 at 11:43 AM, 윤성제(Yoon SungJe) : 네 지금 확인중입니다 June 12, 2025 at 11:43 AM, Shakir (MCS) : UR received successfully June 12, 2025 at 11:44 AM, 윤성제(Yoon SungJe) : The same goes for M7MFA300_P02. June 12, 2025 at 11:44 AM, Shakir (MCS) : Working on it June 12, 2025 at 11:45 AM, Shakir (MCS) : Please check this port is OOS June 12, 2025 at 11:46 AM, 윤성제(Yoon SungJe) : It's not OOS, I sent UR. June 12, 2025 at 11:46 AM, Shakir (MCS) : We received June 12, 2025 at 11:52 AM, 윤성제(Yoon SungJe) : Could you change the destination of M7MFA300_P02,P04 to M0STK014? June 12, 2025 at 11:52 AM, Shakir (MCS) : Could you please press UR again June 12, 2025 at 11:52 AM, Shakir (MCS) : For both ports P02 and P04 June 12, 2025 at 11:53 AM, Shakir (MCS) : Now agv08 assigned from P02 Issue resolved Thank you June 12, 2025 at 11:55 AM, 윤성제(Yoon SungJe) : Could you change the destination of P04 to M0STK013? June 12, 2025 at 11:55 AM, Shakir (MCS) : Checking June 12, 2025 at 11:58 AM, Shakir (MCS) : Now its transferring to STK13 AGV04 assigned Thank you June 12, 2025 at 11:59 AM, 윤성제(Yoon SungJe) : Thank you so much, and I am monitoring. June 12, 2025 at 12:00 PM, Shakir (MCS) : You’re welcome June 12, 2025 at 12:01 PM, 윤성제(Yoon SungJe) : Please change the destination map of the M7MFA_P02, P04 T702901, and T702911 created now to M0STK013. June 12, 2025 at 12:03 PM, 윤성제(Yoon SungJe) : Can't we make the port's destination be created with M0STK013? June 12, 2025 at 12:04 PM, 윤성제(Yoon SungJe) : M0STK011 is blocked, so AGV is not available. June 12, 2025 at 12:06 PM, Shakir (MCS) : Yes, There is route issue, all automated job alternated from Line7 June 12, 2025 at 12:09 PM, 윤성제(Yoon SungJe) : @Shakir (MCS) Can you change this job too? June 12, 2025 at 12:09 PM, Shakir (MCS) : Okay I will do thta June 12, 2025 at 12:19 PM, 윤성제(Yoon SungJe) : I'm sorry, but are you changing it? The line will stop soon, T T. June 12, 2025 at 12:20 PM, Sazzad Bhai SKon : @Acs @Duna Don Could you please transfer it manually by AGV? June 12, 2025 at 12:21 PM, Duna Don : Going June 12, 2025 at 12:39 PM, Duna Don : @Sazzad Bhai SKon we already loaded out manually, please check the upcoming job! Thank you! June 12, 2025 at 12:39 PM, Shakir (MCS) : Checking June 12, 2025 at 12:42 PM, FA/CS/AGV/Taimur : @MCS PLEASE sent AGV; 08 and AGV:05 to stk14 on 1F June 12, 2025 at 12:43 PM, Shakir (MCS) : For P02 still job alternated, because of route STK11. For P04 AGV04 aasigned June 12, 2025 at 12:44 PM, FA/CS/AGV/Taimur : We will load the material throught ACS cmnd but need to empty the AGVs first as all agvs are occupied. June 12, 2025 at 12:44 PM, Shakir (MCS) : Provide carrier id please June 12, 2025 at 12:45 PM, FA/CS/AGV/Taimur : This message was deleted. June 12, 2025 at 12:46 PM, FA/CS/AGV/Taimur : Sorry. AGV: 05 T702901 June 12, 2025 at 12:46 PM, FA/CS/AGV/Taimur : AGV: 08 T702911 June 12, 2025 at 12:49 PM, Duna Don : @Shakir (MCS) @Sazzad Bhai SKon could you please do it ASAP, we are waiting for free AGV to unload manually. Thank you! June 12, 2025 at 12:50 PM, Shakir (MCS) : Working on it June 12, 2025 at 12:52 PM, Shakir (MCS) : Please provide correct carrier id with agv June 12, 2025 at 12:53 PM, Shakir (MCS) : As I see AGV05 having carrier T702911 June 12, 2025 at 12:53 PM, 윤성제(Yoon SungJe) : AGV5:T702901 AGV8:T702911 June 12, 2025 at 12:54 PM, FA/CS/AGV/Taimur : There is a missmatch b/w physical and system carrier data Physically carriers are above which we write. June 12, 2025 at 1:01 PM, Shakir (MCS) : We are working, there is some issue with data, job got alternated June 12, 2025 at 1:05 PM, Sazzad Bhai SKon : @Scs @FA Please check crane M0STK011, crane is idle for long time June 12, 2025 at 1:12 PM, Denkó Jani (F.A.) : There's nothing wrong with the crane, it's working, it just doesn't have a job to do at the moment, so it's really not working right now. June 12, 2025 at 1:14 PM, Sazzad Bhai SKon : It's on grey color instead of usual white. Anyway thanks June 12, 2025 at 1:20 PM, Shakir (MCS) : ACS data mismatch, AGV08 having the carrier T702956 and AGV05 having T702933 in ACS. Please modify the data in ACS. June 12, 2025 at 1:21 PM, 윤성제(Yoon SungJe) : @배병민 (Bae Byoungmin) 안녕하세요 pm님 지금 7라인 셀 팔레트 배출 목적지가 M0STK011인 JOB만 대기상태로 배출 못하고있는데 M0STK012로 가는 길이 막혀서 배출이 안됩니다 June 12, 2025 at 1:22 PM, 윤성제(Yoon SungJe) : 생성되는 job의 목적지를 다른곳으로 생성되게 가능할까요? June 12, 2025 at 1:22 PM, Shakir (MCS) : Please update the data ACS then we will create job. @FA/CS/AGV/Taimur June 12, 2025 at 1:23 PM, 배병민 (Bae Byoungmin) : 가는 길이 막혔다는게 어떤 의미실까요? June 12, 2025 at 1:24 PM, 윤성제(Yoon SungJe) : 1F M0STK012쪽 문이 닫혀있습니다 누군가 사용을 못하도록 막아둔 것 같습니다 June 12, 2025 at 1:25 PM, 배병민 (Bae Byoungmin) : 해당 12번 창고 앞 노드는 예전에 화성서 항공포장으로 AGV 이동제한 요청이와서 노드 막아둔것입니다. June 12, 2025 at 1:26 PM, 배병민 (Bae Byoungmin) : 1번창고로 지정되어도 4번창고로도 들어가야하는데 확인 해볼께요 June 12, 2025 at 1:26 PM, 윤성제(Yoon SungJe) : 감사합니다.. 확인 부탁드립니다 June 12, 2025 at 1:27 PM, FA/CS/AGV/Taimur : Hi Mr @배병민 (Bae Byoungmin) There is a problem as ACS data is missmatching for 1F_Module side for AGV: 05, AGV: 08 Physically carrier data for AGV: 05 is T702901 and for AGV: 08 is T702911 can you please amend this in Acs so MCS team can create unload job. Thanks June 12, 2025 at 1:30 PM, 배병민 (Bae Byoungmin) : 누간가 3번창고서 1번창고로 가는 브릿지 설정을 반대로 해뒀습니다 변경 해드렸습니다 June 12, 2025 at 1:33 PM, 윤성제(Yoon SungJe) : 정말 감사합니다 그리고 해당 이슈로 인해 지금 AGV가 한대밖에 없어서 이 이슈를 확인 해 주실수 있으실까요? June 12, 2025 at 1:49 PM, FA/CS/AGV/Taimur : Sorted. Thank you June 12, 2025 at 2:59 PM, Roland : M0STK024 - Double cargo error Megtudjatok nezni, kerlek szepen? Koszonom! June 12, 2025 at 2:59 PM, Denkó Jani (F.A.) : Going June 12, 2025 at 3:06 PM, Denkó Jani (F.A.) : Kész June 12, 2025 at 3:20 PM, Shakir (MCS) : @FA @Boromisza Zoltán Please check M0STK011_P12, CV Data mismatch error. M0STK011_C01: Crane fork right over run detect Thank you June 12, 2025 at 3:23 PM, Boromisza Zoltán : Okey June 12, 2025 at 3:25 PM, Roland : Nem megy! Nem akarja kihozni a cuccokat 😕 June 12, 2025 at 3:28 PM, Boromisza Zoltán : Solved June 12, 2025 at 3:29 PM, Boromisza Zoltán : Megyünk June 12, 2025 at 3:29 PM, Denkó Jani (F.A.) : Na akkor megnézzük megint June 12, 2025 at 3:58 PM, Roland : @Denkó Jani (F.A.) M0STK023-as conveyoron ragadt az utolso palletta. Megtudjatok nezni, kerlek? Koszi 🙏🏻 June 12, 2025 at 3:59 PM, Denkó Jani (F.A.) : Persze June 12, 2025 at 4:19 PM, Niki (Modul) : @Denkó Jani (F.A.) fóliázógépnél gond van 🥹🫣 June 12, 2025 at 4:19 PM, Denkó Jani (F.A.) : Mindjárt megyünk June 12, 2025 at 4:47 PM, 승규 (BAEK SEUNGGYU) : @FA M7MFA300_P18Upper case TR It stopped during transfer. Please check. June 12, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(3): Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— June 12, 2025 at 7:40 PM, Sánta László : Modul Line 7# Lower case gantry is under falut. Transfer loading incomplete error. FA colleague is here! June 12, 2025 at 10:12 PM, Sánta László : AGV number 3 is currently stopped in front of line 10 MEB (first floor) due to the following error: Left stopper controller alarm. Please check it later. Thank you very much! June 12, 2025 at 10:13 PM, FA CS AGV Jawad : I check it June 12, 2025 at 10:16 PM, Sánta László : Thank you! June 12, 2025 at 10:22 PM, FA CS AGV Jawad : Anytime June 13, 2025 at 12:01 AM June 13, 2025 at 12:01 AM, Maczó Anikó : Sziasztok 2f lift hiba June 13, 2025 at 2:12 AM, Maczó Anikó : Sziasztok 2f lift hiba June 13, 2025 at 3:07 AM, VK (mcs) : @FA Please check M0STK024 Crane PLC interface error. June 13, 2025 at 3:21 AM, Édl Tamás : Solved June 13, 2025 at 3:38 AM, Sánta László : A small to large AGV congestion has formed at the beginning of the lines on the ground floor of the module. Could you please check what the reason might be? Thank you in advance! June 13, 2025 at 3:39 AM, FA CS AGV Jawad : Yes sure June 13, 2025 at 6:17 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Skwarek Tibor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Boromissza Zoltán Döme György Harasztia Zoli June 13, 2025 at 6:20 AM, Shakir (MCS) : @FA M0STK023_C01: MCP 2F OP1 Light curtain detect error Thank you June 13, 2025 at 6:22 AM, Zoltán Harasztia FA : Cheking June 13, 2025 at 6:35 AM, Shakir (MCS) : @FA Please check M0STK037_C01, Double cargo error. Thank you June 13, 2025 at 6:43 AM, Farkas Misi : Jó reggelt. M0STK037 raktár meg állt. Légyszives nézzétek meg. Köszönöm. June 13, 2025 at 6:45 AM, Döme György F.A : Solved June 13, 2025 at 6:49 AM, Döme György F.A : Solved June 13, 2025 at 7:45 AM, Roland : Hello M0STK024 - Crane fork right collapse detect error. Can you check it please? Thank you! June 13, 2025 at 7:46 AM, Döme György F.A : Megyek June 13, 2025 at 8:30 AM, Shakir (MCS) : @FA M0STK023_C01: MCP 2F OP1 Light curtain detect error Thank you June 13, 2025 at 8:30 AM, Zoltán Harasztia FA : Cheking June 13, 2025 at 9:41 AM, Shakir (MCS) : @FA Please check M0STK037_C01, Double cargo error. Thank you June 13, 2025 at 9:43 AM, Shakir (MCS) : @FA @Zoltán Harasztia FA Please check M0STK033_P14 is OOS, Carrier are blocked. June 13, 2025 at 9:43 AM, Döme György F.A : Checking June 13, 2025 at 9:45 AM, Döme György F.A : Checking June 13, 2025 at 9:47 AM, Döme György F.A : Solved June 13, 2025 at 10:15 AM, Shakir (MCS) : @FA Please check M0CNV023-36_035 Wrapper heater temp alarm. June 13, 2025 at 10:19 AM, Döme György F.A : The colleagues are at their workstation. June 13, 2025 at 10:30 AM, 윤성제(Yoon SungJe) : @FA Hello, the GF module 3 and 4 line raw material INPORT pallet is hung. Can you check it out? June 13, 2025 at 10:32 AM, András : 2f CV011 Stop detect error and CV010 Cycle stop time over error June 13, 2025 at 10:33 AM, Zoltán Harasztia FA : Megyek June 13, 2025 at 10:44 AM, Zoltán Harasztia FA : Kész June 13, 2025 at 10:45 AM, András : Köszi June 13, 2025 at 10:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team,MCS/RTD Carrier id U023770 U023767 해당 제품 MOSTK037 뱅크에서 반송 요청 9시 14분에 했는데 아직도 배출이 안되고 있습니다. 빠른 확인 부탁드립니다 June 13, 2025 at 10:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : 현재 1F 동간 사이에 M0CNV34_P05_BP01 에 정지상태입니다 June 13, 2025 at 10:51 AM, Shakir (MCS) : @FA @Zoltán Harasztia FA Please check M0STK033_P14 is OOS, Carrier are blocked. June 13, 2025 at 10:51 AM, Döme György F.A : Solved June 13, 2025 at 10:52 AM, Shakir (MCS) : Now, carriers started to move. Thank you June 13, 2025 at 11:10 AM, Gabor(priv) : Dear Team! In module area 1F end of line 6 3 AGV standing next to each other Agv4 AGV 8 and AGV 1 This is completely blocking the emergency exit routes! Please move on of the agv! June 13, 2025 at 11:11 AM, FA/CS/AGV/Taimur : Hi, will move AGVs to clear the path. Thanks June 13, 2025 at 11:13 AM, Gabor(priv) : Thank you! June 13, 2025 at 11:17 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS team, MCS/RDD U023770 U023767 U023764 해당제품 37뱅크에서9시 14분에 반송명령 한걸 다시 삭제하여 재 반송명령 생성하여 작업하였습니다. 해당잡을 삭제하시면 현장에서 어느제품이 배출 되고 남은지 확인 작업에 현지 직원들이 어려움이 있습니다. 해당팀에서 삭제하셨다면 다시 생성해서 작업진행 하도록 부탁드립니다 June 13, 2025 at 11:18 AM, FACS_JaewonShin : 확인해보겠습니다 June 13, 2025 at 11:22 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 현장 확인 하시어 어떠한 문제로된건지 공유해주세요 June 13, 2025 at 11:22 AM, FACS_JaewonShin : 알겠습니다 June 13, 2025 at 8:33 PM, Mohammad Amir : @FA Please check M0CNV032_P01 there is Stop detect error and several jobs are pending. Thank you very much! June 13, 2025 at 8:46 PM, Dávid F.A. : @Mohammad Amir Good evening. Problem solved! June 13, 2025 at 8:47 PM, Mohammad Amir : Jó Éstét Kivánok, Köszönöm szepen 🙏. June 13, 2025 at 9:55 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK023_C01 there is CRANE FORK left wide #1 check error. Thank you very much! June 13, 2025 at 9:55 PM, N.Gábor F.A. : Checking June 13, 2025 at 9:57 PM, N.Gábor F.A. : Solved June 13, 2025 at 9:58 PM, Mohammad Amir : Köszönöm szepen 🙏. June 13, 2025 at 10:40 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_34_040/39 there is Light Curtain error. Thank you very much! June 13, 2025 at 10:41 PM, Mohammad Amir : @N.Gábor F.A. For your information:- This issue has been resolved ✅. Thank you! June 13, 2025 at 11:19 PM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! June 13, 2025 at 11:25 PM, Dávid F.A. : The operating staff is replacing the foil, this is causing the problem! June 13, 2025 at 11:25 PM, Mohammad Amir : Thank you very much for the information. June 14, 2025 at 12:41 AM June 14, 2025 at 12:41 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV023_P43/44 there is Light Curtain error. Thank you very much! June 14, 2025 at 5:02 AM, Dávid F.A. : @Mohammad Amir I would like to request information about a certain pallet! Next ID:.PS222-2505080012! Where was it stored in the warehouse! June 14, 2025 at 5:04 AM, Mohammad Amir : Sure, Checking June 14, 2025 at 5:06 AM, Dávid F.A. : Quite an accurate warehouse name! Location! June 14, 2025 at 5:06 AM, Mohammad Amir : The location of this pallet is :- M0STK026 shelf 0102806 . Please let me know if you need further information Thank you very much! June 14, 2025 at 5:07 AM, Dávid F.A. : Thank you, it helped a lot! June 14, 2025 at 5:07 AM, Mohammad Amir : I am glad to hear this. You are welcome! June 14, 2025 at 6:08 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(2) Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 14, 2025 at 6:48 AM, András : 2f lift floor in position error and 1F down slow time ower June 14, 2025 at 6:51 AM, Döme György F.A : Nézzük June 14, 2025 at 7:04 AM, Sarvajcz Ferenc FA : Okes June 14, 2025 at 7:44 AM, András : 2F GF stop time over June 14, 2025 at 7:47 AM, Zoltán Harasztia FA : Kesz June 14, 2025 at 7:48 AM, András : Köszi June 14, 2025 at 11:23 AM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 there is CRANE FORK left wide #1 check error. Thank you June 14, 2025 at 11:42 AM, Sarvajcz Ferenc FA : In processing.. June 14, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 14, 2025 at 7:48 PM, Shakir (MCS) : @FA Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! June 15, 2025 at 12:00 AM June 15, 2025 at 12:00 AM, Shakir (MCS) : @FA Please check M0STK028_C01 there is CRANE FORK left collapse detect error. Thank you June 15, 2025 at 12:08 AM, N.Gábor F.A. : Solved June 15, 2025 at 1:12 AM, Dávid F.A. : @Shakir (MCS) I would like to ask for help to delete an existing job .. and then request it again! One Local:. M7MFA300_P02 ID: T702216 the other Local:. M7MFA300_P4 ID:. T082691 each Palette physically thanks in advance! June 15, 2025 at 1:16 AM, Shakir (MCS) : T702216 job initiated AGV05 aasigned June 15, 2025 at 1:23 AM, Shakir (MCS) : T082691 AGV05 assigned June 15, 2025 at 1:24 AM, Dávid F.A. : Thank you very much! Problem solved💪 June 15, 2025 at 1:24 AM, Shakir (MCS) : You’re welcome June 15, 2025 at 1:51 AM, FA CS AGV Jawad : @Shakir (MCS) can you plz send this pallet to its origin/ source AGV 03 Pallet ID - S001210 June 15, 2025 at 1:53 AM, FA CS AGV Jawad : @ACS can you plz delete the job for this AGV June 15, 2025 at 1:54 AM, Shakir (MCS) : First delete the job from ACS then I will send it to STK. June 15, 2025 at 6:22 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Skwarek Tibor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(2) Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 15, 2025 at 9:04 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team , MCS/RTD 지금 M0STK037,38에서 제품을 꺼내고 있는데 M0CNV034 1F 구역에서 제품이 움직이지 않고 있습니다. 확인 부탁드립니다 I'm taking out the product from M0STK037,38, but the product is not moving in the 1F area of M0CNV034. Please check June 15, 2025 at 9:05 AM, Zoltán Harasztia FA : Cheking June 15, 2025 at 9:09 AM, Zoltán Harasztia FA : Solved June 15, 2025 at 9:09 AM, Zoltán Harasztia FA : This message was deleted. June 15, 2025 at 9:13 AM, 배병민 (Bae Byoungmin) : 현재 37,38번 창고에서 배출되는 모듈 완제품이 33번 창고를 통하여 배출되는 있으므로 (적재율이 제일 낮은 창고) 배출은은 조금씩 밀릴수 있습니다 참고 부탁드립니다. June 15, 2025 at 9:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 아직도 그자리에 있는데 확인 부탁드립니다 June 15, 2025 at 9:25 AM, 배병민 (Bae Byoungmin) : 지금 33번 창고 다른 잡수행중이였습니다. 물류는 정상 진행중입니다 June 15, 2025 at 9:26 AM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 또 RTD 반송 명령을 삭제했습니다 June 15, 2025 at 9:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : 10개 잡이 남아있었는데 지금 4개밖에 검색이 되지 않습니다. 금요일에도 한번 말씀드렸는데, 반송명령을 삭제하시면 다시 생성해주셔야 합니다 June 15, 2025 at 9:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : 저희 직원들이 명령이 삭제되면 배출된것과 안된것을 찾기가 쉽지 않습니다 June 15, 2025 at 9:28 AM, SKOH2/제조-셀,모듈 출하/김병호 : 빠른 확임 부탁드립니다 June 15, 2025 at 9:29 AM, 배병민 (Bae Byoungmin) : @duzzaman Md (MCS) Please check the section on deleting return orders. June 15, 2025 at 9:29 AM, duzzaman Md (MCS) : On it June 15, 2025 at 9:38 AM, SKOH2/제조-셀,모듈 출하/김병호 : 반송 명령 10개 모두 삭제 되었습니다. June 15, 2025 at 9:41 AM, András : This message was deleted. June 15, 2025 at 9:43 AM, duzzaman Md (MCS) : Can you give me a carrier ID for reference ? June 15, 2025 at 9:47 AM, SKOH2/제조-셀,모듈 출하/김병호 : It takes a long time for us to find the deleted command again. Why? Can you tell me if the command will be deleted? June 15, 2025 at 9:48 AM, duzzaman Md (MCS) : Can you help with a bit more info. Like source, destination or a carrier ID ? Then ill be able to find the reason June 15, 2025 at 9:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) PM님 저희가 다시 반송명령 삭제된것을 찾으려면 기 배출된 제픔을 스켄작업해서 반송안된 제품을 발라내야합니다. 현지 직원들은 그렇게 까지 교육이 안되있습니다. 반송 명령 삭제가 왜 생기는지 알수 있을가요? 시스템문제인지, 휴먼에러인지요 June 15, 2025 at 9:50 AM, SKOH2/제조-셀,모듈 출하/김병호 : All destinations were set to M0CNV033_M03 port. June 15, 2025 at 9:50 AM, 배병민 (Bae Byoungmin) : 확인이 필요합니다. 반송 명령을 한번에 몇개내리시나요? June 15, 2025 at 9:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : 펨님 저희가 미 배출된 제품을 찾으려면 배출된 제품 스켄해서 발라내야해서요 시간이 걸립니다 June 15, 2025 at 9:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : 작업 끝나는데로 말씀드릴게요 June 15, 2025 at 9:54 AM, SKOH2/제조-셀,모듈 출하/김병호 : 펨님 지금 U023782 먼저 찾아서 반송 명령 내렸습니다. 33뱅크에 있습니다 June 15, 2025 at 9:54 AM, SKOH2/제조-셀,모듈 출하/김병호 : 삭제된 제품들이 다 33번 뱅크에 있는거 같습니다 June 15, 2025 at 9:55 AM, 배병민 (Bae Byoungmin) : 삭제된건지 확인이 필요하지만 반송 명령주어진 재품은 다 33반창고에 적재되었습니다 June 15, 2025 at 9:56 AM, SKOH2/제조-셀,모듈 출하/김병호 : 일단 5번째까지 찾아서 반송 명령 다시 생성했습니다 나머지도 지금 찾고 있습니다 June 15, 2025 at 9:57 AM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 확인 감사합니다. 다만 저희 현장 직원들이 명령이 삭제되면 미 배출된 제품을 찾기가 힘듭니다. 이점 이해해 주시길 바라며, 해당원인 확인 부탁드립니다 June 15, 2025 at 10:03 AM, SKOH2/제조-셀,모듈 출하/김병호 : 명령 삭제된 목록 찾아서 재 생성 했습니다.반송 명령 삭제 안되게 전달 부탁드립니다 June 15, 2025 at 10:06 AM, SKOH2/제조-셀,모듈 출하/김병호 : 한번에 적게는 대략 18~20개 정도 생성 합니다 June 15, 2025 at 10:06 AM, SKOH2/제조-셀,모듈 출하/김병호 : 많으면 20개 이상도 생성하고 있습니다 June 15, 2025 at 10:07 AM, Krisztian Bozor invited Korózs Péter Gábor. June 15, 2025 at 10:07 AM, 배병민 (Bae Byoungmin) : 일단 목적지에 설정이후 창고를 통해 목적지로 반송되다가 해당 창고에 적재되고 이후 잡 명령이 왜 안주어 졌는지를 확인해봐야 할것 같습니다. June 15, 2025 at 10:10 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다 June 15, 2025 at 10:46 AM, duzzaman Md (MCS) : I was preliminarily investigating some of the carriers. The job was being terminated automatically at M0CNV034_P16. MCS got transfer completed report and at the very next its getting terminated. The command us given to RTD by MCS. Operation name : TransferService.TerminatePreviousGarbageTransportJob> MaterialManagerImpl.updateExpectedLocation. June 15, 2025 at 12:00 PM, duzzaman Md (MCS) : @FA Please check M0STK022_C01 there is CRANE Fork Right Collapse detect 3 error. Thank you! June 15, 2025 at 12:02 PM, Döme György F.A : On my way June 15, 2025 at 12:06 PM, Döme György F.A : Solved June 15, 2025 at 1:51 PM, duzzaman Md (MCS) : @FA Please check M0STK013_P05 there is C/V CCW SLOW DETECT ERROR Thank you ! June 15, 2025 at 1:52 PM, Zoltán Harasztia FA : Cheking June 15, 2025 at 1:58 PM, Zoltán Harasztia FA : Solved June 15, 2025 at 5:23 PM, duzzaman Md (MCS) : @FA Please check M0STK013_P03/P05 there is C/V CCW SLOW DETECT ERROR Thank you ! June 15, 2025 at 5:26 PM, Döme György F.A : We are here June 15, 2025 at 5:40 PM, Mohammad Amir : @FA Please check M0STK023_C01 MCP 2F OP1 Light curtain detect error and it is blocking one job. Thank you very much! June 15, 2025 at 5:40 PM, Zoltán Harasztia FA : Omv June 15, 2025 at 5:52 PM, Döme György F.A : Solved June 15, 2025 at 5:52 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 5:53 PM, Döme György F.A : Nagyon szívesen! June 15, 2025 at 5:57 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Kiss Balázs, Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 15, 2025 at 6:34 PM, Mohammad Amir : This message was deleted. June 15, 2025 at 6:35 PM, Mohammad Amir : Good evening @Dávid F.A. Please check M7MFA300_P21 ,we received request to deliver Pallet there , however it is OOS and because of this ,job has been pending for quite a long time. Please let me ,do you need pallet at Port P21 or it was mistakenly called? Thank you very much! June 15, 2025 at 6:36 PM, Dávid F.A. : @Mohammad Amir Have a good evening! I'll check it out right away! June 15, 2025 at 6:36 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 6:38 PM, Jun(정우준)_SKOH FA : Night shift FA Schedule Date: 2025.06.15 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. GF 최명운(CHOI Myoungwoon) 3. GF 김정희(Kim jeong hul) June 15, 2025 at 6:42 PM, Dávid F.A. : Staff use it in manual mode.. no assigned task required! June 15, 2025 at 6:43 PM, Mohammad Amir : Thank you very much for the information. I have cancelled the task and pallet have been stored in the source warehouse ✅. June 15, 2025 at 8:05 PM, FA-CS-AGV-Masoud : @Dávid F.A. Please check box packing port June 15, 2025 at 8:23 PM, Mohammad Amir : @FA @Dávid F.A. Please check M0CNV036_RTV01 there Is Port interface Error and it is blocking few transfers. Thank you very much! June 15, 2025 at 8:25 PM, Dávid F.A. : Solved! June 15, 2025 at 8:25 PM, Mohammad Amir : Köszönom szepen 🙏. June 15, 2025 at 8:35 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_36_35 there is Wrapper Heater Cover check Alarm. Thank you! June 15, 2025 at 8:40 PM, N.Gábor F.A. : No problem here June 15, 2025 at 8:41 PM, Mohammad Amir : Thank you very much. Issue has been resolved already. June 16, 2025 at 12:56 AM June 16, 2025 at 12:56 AM, N.Gábor F.A. : Solved June 16, 2025 at 2:23 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_36_028 there is Wrapper Heater temp Alarm. Thank you! June 16, 2025 at 3:37 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M4MFA300_P04 it is in Manual mode hence OOS , that's why one job is Alternated. Is there production on line-4? Thank you very much! June 16, 2025 at 3:38 AM, N.Gábor F.A. : Checking June 16, 2025 at 6:29 AM, Sánta László : Thank you so much! June 16, 2025 at 7:39 AM, Shakir (MCS) : @FA Please check M0CNV032_P01 there is Stop detect error. Thank you June 16, 2025 at 7:48 AM, Shakir (MCS) : @Csepi Árpád June 16, 2025 at 7:57 AM, Csepi Árpád : Solved June 16, 2025 at 8:52 AM, 차용문/CHA YONGMOON : @배병민 (Bae Byoungmin) 피엠님 2,3라인 더니지언로딩쪽에 있는 AGV 충전기도 미사용으로 진행가능할까요? 리차징 라인이 추가 되었습니다. June 16, 2025 at 8:53 AM, 배병민 (Bae Byoungmin) : 제가 한번만 체크하고 말씀드리겠습니다. June 16, 2025 at 8:53 AM, 유주환(Yoo Joohwan) : @배병민 (Bae Byoungmin) 금일 8라인 가동 예정 입니다 AGV 전원 ON 부탁 드립니다 June 16, 2025 at 8:53 AM, 차용문/CHA YONGMOON : 감사합니다! June 16, 2025 at 8:54 AM, FACS_JaewonShin : TBM후 해당 agv점검하겠습니다 June 16, 2025 at 9:12 AM, Maczó Anikó : Sziasztok 2 emeleten az 1 gépnél lift hiba . Köszönöm June 16, 2025 at 9:13 AM, 배병민 (Bae Byoungmin) : 샘플 생산인가요? 일정 간략하게 공유 부탁드릴께요 June 16, 2025 at 9:17 AM, Shakir (MCS) : @FA Please check M0CNV 023 , 1F down slow time over error. Thanks June 16, 2025 at 9:18 AM, 송호석(Ho seok song) : 8라인 생산 전 연습생산 및 자산화 용 모듈 생산입니다. 70EA정도 타겟이고 금일부터해서 생산예정입니다 피엠님. June 16, 2025 at 9:28 AM, Shakir (MCS) : @FA Please check M0STK023_C01 there is Crane Fork Right Collapse Detect 1 error. M0STK025 : Carrier get, Load check error. Thank you Thank you June 16, 2025 at 9:38 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다 생산 문제없게 준비 대응하겠습니다 공유 감사합니다 June 16, 2025 at 9:45 AM, Shakir (MCS) : @Csepi Árpád please check June 16, 2025 at 10:01 AM, Brázik János : Solved June 16, 2025 at 10:09 AM, Shakir (MCS) : Still M0STK025 is OOS June 16, 2025 at 10:23 AM, 이민호 MINHO : @FA team Please check all pallets of UNK ID in the M0STK021 ~28 and release the pallets into each port Thank you June 16, 2025 at 10:31 AM, Roland : Hello. M0CNV022_M01 IN port - Product detect error. Can you check it, please? Thank you June 16, 2025 at 10:32 AM, 배병민 (Bae Byoungmin) : @이민호 MINHO PM님 UNKDUP는 ID 중복 발생이라 자재팀에서 확인이 필요한부분입니다. @FACS_JaewonShin 팀장님 UNKDBS UNKEMP 위 발생건은 실물 확인하시고 처리 부탁드립니다. June 16, 2025 at 10:40 AM, 이민호 MINHO : 네 DUP 같이 출고 부탁드리겠습니다 June 16, 2025 at 10:44 AM, 배병민 (Bae Byoungmin) : 네, 유선상 전달드렸듯이 우선 저희가 출고 해드리겠습니다. 차후 교육 일정 수립하여 인계해들겠습니다. 출고 Port 알려주면 해당 Port로 지금 출고해드릴께요 June 16, 2025 at 10:53 AM, 이민호 MINHO : M0CNV021_M03 / M04 포트 로 출고 부탁드리겠습니다 June 16, 2025 at 11:00 AM, 배병민 (Bae Byoungmin) : 네 지금 하나씩 출고해드릴께요 June 16, 2025 at 11:05 AM, 배병민 (Bae Byoungmin) : PM님 현재 모듈 완제품 구간 AGV 6대운영중이고 현재 4,5라인 사이 동일 사유로 충전기 사용을 막아둔 상황입니다. 1,2라인까지 막으면 총 2개사용만 하는것이라 운영이 어려울수도 있습니다. 우선 금일 주간 1,2라인 충전포트 까지 막아두고 운영하면서 모니터링 해보겠습니다. 모니터링 이후 장기적으로 가능여부는 말씀드리겠습니다 June 16, 2025 at 11:08 AM, 이민호 MINHO : @MCS team Please delete a job with PS22A-2506130044 in M0CNV022_M01 @FA team Please check a sensor, that is not fixed properly Port : M0CNV022_M01 X0B48 Product detect sensor June 16, 2025 at 11:08 AM, Shakir (MCS) : Checking June 16, 2025 at 11:10 AM, Shakir (MCS) : Job cancelled June 16, 2025 at 11:10 AM, 송호석(Ho seok song) : 네 2라인/5라인 보충전 라인 구현에 따라 이동 동선에 걸려 충전기 사용 중단을 요청드린건인데요, 충전 capa한번 봐주시고 부족 시 말씀 부탁드립니다. 보충전 완료 후 시간대 다시 On하여 충전 capa보상 등 고민해보겠습니다. June 16, 2025 at 11:11 AM, 배병민 (Bae Byoungmin) : PM님 25~28번 창고에 있는 UNKDUP 자재들 M0CNV022_M03/M04 쪽으로 배출해도 될까요? June 16, 2025 at 11:12 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다 June 16, 2025 at 11:14 AM, 이민호 MINHO : 네 부탁드리겠습니다 June 16, 2025 at 11:23 AM, FACS_JaewonShin : 남측 원자재 stk(25, 26) 남아있는 잡 확인후 unkdbs unkemp 확인하겠습니다. June 16, 2025 at 11:26 AM, 배병민 (Bae Byoungmin) : @Shakir (MCS) Please return the Pallet in Module Raw Material Warehouse 21 to the destination. PLT ID: PF221-2506100003-2315026665530102 Destination: M0CNV021-M03 June 16, 2025 at 11:27 AM, 윤성제(Yoon SungJe) : @FA Hello, can you move the AGV in front of the module 1F line 8? June 16, 2025 at 11:27 AM, FA/CS/AGV_ Asjad : Coming June 16, 2025 at 11:27 AM, Shakir (MCS) : Checking June 16, 2025 at 11:30 AM, 배병민 (Bae Byoungmin) : @Shakir (MCS) Please return the Pallet in Module Raw Material Warehouse 26 to the destination. PLT ID SAI471B-8 SAI471A-9 Destination: M0CNV022-M04 June 16, 2025 at 11:31 AM, Shakir (MCS) : Job initiated, transferring M03 ✅ Thank you June 16, 2025 at 11:32 AM, Shakir (MCS) : Working on it June 16, 2025 at 11:33 AM, FA/CS/AGV_ Asjad : Done June 16, 2025 at 11:33 AM, 배병민 (Bae Byoungmin) : @Shakir (MCS) Please return the Pallet in Module Raw Material Warehouse 27 to the destination. PLT ID : PS222-2503130004AA-1 Destination: M0CNV022-M04 June 16, 2025 at 11:36 AM, Shakir (MCS) : Done , Job initiated June 16, 2025 at 11:36 AM, 배병민 (Bae Byoungmin) : thank you so much. June 16, 2025 at 11:36 AM, Shakir (MCS) : You’re welcome June 16, 2025 at 11:37 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team , MCS/RTD @배병민 (Bae Byoungmin) 지금 M0STK037,38에서 제품을 도크장으로 반송 명령 생성 했는데 M0CNV034 뱅크로 들어가면서 잡이 삭제 되고 있습니다. 지난주 처럼 이런 현상이 계속 발생되어 빠른 확인 부탁드립니다. June 16, 2025 at 11:38 AM, Shakir (MCS) : Job initiated to M04 ✅ Thank you June 16, 2025 at 11:41 AM, Sazzad Bhai SKon : Yes we have seen the discrepancy at M0CNV034_P16 and M0STK033_P14. We're analysing the issues June 16, 2025 at 11:44 AM, 배병민 (Bae Byoungmin) : PM님 UNKDUP 발생 4개 PLT 전체 출고되었습니다 June 16, 2025 at 11:44 AM, FACS_JaewonShin : 남측 25stk unkdbs 실물없음 -> scs 내 삭제 June 16, 2025 at 11:48 AM, 이민호 MINHO : 감사합니다 June 16, 2025 at 11:50 AM, 이민영(Minyoung Lee) invited 강승수(Kang seung su). June 16, 2025 at 11:50 AM, 이민영(Minyoung Lee) : . June 16, 2025 at 11:52 AM, 강승수(Kang seung su) : 안녕하세요 모듈 강승수PM입니다 모듈 2라인 ,3라인 사이에있는 AGV 충전 미사용 요청 드립니다! 사유 : 작업자 파레트 핸드카 작업구간,에어발란스 작업구간 June 16, 2025 at 11:56 AM, FACS_JaewonShin : 북측 stk unk 확인 조치 진행하겠습니다 June 16, 2025 at 11:56 AM, 배병민 (Bae Byoungmin) : 안녕하세요 지금 해당구간은 미사용되어 있습니다. 위에 언급드린봐와같이 충전 포트 2개 사용에대한 Capa는 모니터링이 필요한부분입니다. June 16, 2025 at 12:06 PM, Alexandra : 2f in lift stop time over, floor in position error June 16, 2025 at 12:09 PM, 윤성제(Yoon SungJe) : @FA Can you check the 1F module cell loading unit AGV 2 and 6? It's too close, so an alarm is being generated. June 16, 2025 at 12:09 PM, FA/CS/AGV_ Asjad : Checking June 16, 2025 at 12:10 PM, Shakir (MCS) : @FA Please check M0CNV023_LF22 there is GF STOP TIME OVER ERROR Thank you! June 16, 2025 at 12:12 PM, FACS_JaewonShin : 북측 원자재 stk unk 조치 끝났습니다 June 16, 2025 at 12:14 PM, FA/CS/AGV_ Asjad : Solved June 16, 2025 at 12:16 PM, Shakir (MCS) : @FA @Csepi Árpád Please check M0STK031_P14 is OOS, Carrier are blocked. Thank you June 16, 2025 at 12:48 PM, Csepi Árpád : @CS I need help with the 1F M0STK-031 P14 port error! Error: Pallet Backlash. June 16, 2025 at 1:16 PM, Csepi Árpád : The error has been temporarily fixed! June 16, 2025 at 1:19 PM, Shakir (MCS) : @FA Please check M0STK022_C01: MCP GF OP1 Light curtain detect error Thank you June 16, 2025 at 1:26 PM, Édl Tamás : Solved June 16, 2025 at 1:26 PM, Csepi Árpád : Solved June 16, 2025 at 1:28 PM, Maczó Anikó : Sziasztok 2f lift hiba az 1 gépnél June 16, 2025 at 1:31 PM, Csepi Árpád : Kész June 16, 2025 at 1:47 PM, Shakir (MCS) : @FA Please check M0STK031_C01: MCP 1F OP1 Light curtain detect error Thank you June 16, 2025 at 1:47 PM, Shakir (MCS) : @FA Please check M0STK023_C01 there is MCP0140MC03,MC04 On inverter power Thank you June 16, 2025 at 1:55 PM, Brázik János : Solved June 16, 2025 at 2:15 PM, Brázik János : Solved June 16, 2025 at 2:43 PM, Maczó Anikó : Sziasztok a hiba ugyan az 😁 June 16, 2025 at 2:46 PM, Csepi Árpád : Kész ismét 😁 June 16, 2025 at 3:38 PM, Roland : Hello. M0STK023 Crane plc interface error, please check it, thanks June 16, 2025 at 3:40 PM, 이민영(Minyoung Lee) : please check 3line lowercase empty June 16, 2025 at 3:45 PM, Édl Tamás : Solved June 16, 2025 at 3:53 PM, 배병민 (Bae Byoungmin) : Lower cover PLT AGV#3로 포트 투입예정입니다. 2F 창고 RTV쪽 에러 발생 및 조치로인하여 투입에 다소 시간이 소요되었습니다 June 16, 2025 at 3:59 PM, Shakir (MCS) : @FA Please check M0STK022_C01, Double cargo error. Thank you June 16, 2025 at 4:00 PM, Shakir (MCS) : @FA Please check M0STK023_C01, Double cargo error. Thank you June 16, 2025 at 4:14 PM, Brázik János : Solved June 16, 2025 at 4:15 PM, Brázik János : Solved June 16, 2025 at 4:18 PM, Maczó Anikó : Sziasztok a hiba ugyan az csak most a középső gépnél 😆 June 16, 2025 at 4:22 PM, 승규 (BAEK SEUNGGYU) : @FA GF Please check the 3-4 Line M0CNV023 LF. The material is caught. June 16, 2025 at 4:22 PM, Roland : M0STk023 - Crane fork left wide check error. Please check it! Thank you June 16, 2025 at 4:23 PM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 원자재 3,4라인쪽 리프트 라이트 커튼으로 동작 멈췄습니다. 비닐때문인거 같은데 빠른 조치 부탁합니다 June 16, 2025 at 4:38 PM, Brázik János : would like some Korean help for stk 23. June 16, 2025 at 5:03 PM, Csepi Árpád : @Shakir (MCS) “Hi! I need help! There is a transport task that is not moving! M0CNV023-C/V-030 ID: PS210-2505130036” June 16, 2025 at 5:06 PM, Shakir (MCS) : This message was deleted. June 16, 2025 at 5:07 PM, Shakir (MCS) : Check M0CNV023_36_038 is OOS June 16, 2025 at 5:08 PM, Shakir (MCS) : Please check STOP DETECT ERROR June 16, 2025 at 5:10 PM, 배병민 (Bae Byoungmin) : @유주환(Yoo Joohwan) PM님 3,4라인 FR-capsule 박스 재회수 시 랩마감처리가안되어 나풀나풀거려서 라이트 커튼 및 화물붕괴 알람이 발생되고 있습니다. 한번 교육이 필요할듯 합니다 June 16, 2025 at 5:22 PM, Csepi Árpád : @Shakir (MCS) “Hi! I need help! There is a transport task that is not moving! M0CNV023-C/V-030 ID: PS210-2505130036” June 16, 2025 at 5:26 PM, Shakir (MCS) : Could you please tell the current location of carrier. Carrier location is NA June 16, 2025 at 5:27 PM, Shakir (MCS) : Now carry started to move June 16, 2025 at 5:27 PM, Shakir (MCS) : *carrier June 16, 2025 at 5:50 PM, Sánta László : @Csepi Árpád 7es sorra nem érkezik meg az Insulation cover. Emeletről már lejött a liftel, ott van a cv végèn, de az AGV nem megy érte. June 16, 2025 at 6:02 PM, Ákos (Modul 2.E.) : Sziasztok szép estét karbantartott kérek a második emeletre köszönöm szépen June 16, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 FA, June 16, 2025 at 6:09 PM, Kurkó Péter : Valaki nézzen rá legyen kedves a 7sornál a raktárra a conveyor tele de nem szedi le az AGV és a lift sem viszi be a cuccokat Köszi June 16, 2025 at 6:09 PM, Kurkó Péter : 1F June 16, 2025 at 6:12 PM, Denkó Jani (F.A.) : Hamarosan érkezünk mindenhova IS 🫡 June 16, 2025 at 6:28 PM, VK (mcs) : @FA Please check M0STK023 June 16, 2025 at 6:33 PM, 승규 (BAEK SEUNGGYU) : @FA 1F 7line M0CNV023_LF03_P43 Please check. The materials came down but AGV doesn't bring it. June 16, 2025 at 6:41 PM, Denkó Jani (F.A.) : @VK (mcs) Please check The palette on the port does not set a goal, the AGV has no orders to go for it. June 16, 2025 at 6:42 PM, VK (mcs) : Checking June 16, 2025 at 6:44 PM, VK (mcs) : Job canceled by OP action. Now I sent it back to STK. June 16, 2025 at 7:42 PM, Niki (Modul) : @Denkó Jani (F.A.) 2.gépnél a fóliázógép megint nem égette el a fóliát June 16, 2025 at 8:24 PM, Niki (Modul) : @Denkó Jani (F.A.) hátsó raltárban gond van June 16, 2025 at 8:25 PM, Denkó Jani (F.A.) : Tudunk róla June 16, 2025 at 8:29 PM, VK (mcs) : @FA Please check M0STK035 Crane Fork right collapse detect 4 June 16, 2025 at 8:30 PM, Denkó Jani (F.A.) : Going June 16, 2025 at 9:04 PM, FACS_Hyeongi Son : @SKOH2/제조-셀,모듈 출하/김병호 안녕하세요 주임님 금일 공더니지 투입은 끝난걸까요? June 16, 2025 at 9:11 PM, SKOH2/제조-셀,모듈 출하/김병호 : 더니지 입고는 끝났습니다. 명일 출하 모듈 작업 중일 겁니다 June 16, 2025 at 9:17 PM, FACS_Hyeongi Son : 네 알겠습니다 출하작업중에도 문제 생기면 연락주십시오 바로 조치하겠습니다 June 16, 2025 at 9:27 PM, 배병민 (Bae Byoungmin) : @이민호 MINHO 원자재 창고#21~24까지 출하 예약 잡아두고 출하장에서 화물 배출을하지않아서 물류 쭉 대기 상태입니다. 16시35분경부터 밀려있는 상황이며 23번 창고는 잡이 4개 예약잡혀있고 화물이 밀려서 계속대기중입니다. 이렇게하면 원자재 창고에서 모듈로 잡 생성시 자재가 반송안될 경우가 생기니 관리 부탁드립니다. 23번 창고에있는 잡은 다 삭제 하겠습니다. June 16, 2025 at 9:37 PM, Niki (Modul) : @Denkó Jani (F.A.) 1gép fóliázógép meg állt June 16, 2025 at 9:37 PM, Denkó Jani (F.A.) : Megyünk June 16, 2025 at 9:45 PM, 이민호 MINHO : 명일 아침에 바로 출고할려고 잡 생성해 놓은 것 같습니다. 4곳에서 대기 상태인데 23번 창고만 모듈 라인 반송이 안되는 상황이라며 어떤 문제 인지 알 수 있을까요? June 16, 2025 at 9:46 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK028In PS230-2506040125, M0STK025In PS230-2506040163Can I check if the material is empty? June 16, 2025 at 9:48 PM, Denkó Jani (F.A.) : Checki June 16, 2025 at 9:53 PM, Denkó Jani (F.A.) : Solved June 16, 2025 at 9:54 PM, 배병민 (Bae Byoungmin) : H/S에서 화물이 대기하고있고 이후 4개의 Job이 동일 H/S 경로로 잡혀있어 스택은 첫번째 Job받고 계속 대기하고 있는 상황입니다. 해당 물류는 대기해도 큰문제 없으나 창고 대기 Job이 막고있는 경우 스택은 계속 대기 상태입니다. 만약 이경우 모듈에서 요청한 화물이 23번 창고에 있을경우 H/S 자재를 한번 배출하지 않으면 이송이 불가할수 있는 부분입니다. June 16, 2025 at 10:01 PM, Denkó Jani (F.A.) : @VK (mcs) please check June 16, 2025 at 10:03 PM, VK (mcs) : According to MCS, both are Empty June 16, 2025 at 10:04 PM, 승규 (BAEK SEUNGGYU) : Thank you for the confirmation. June 16, 2025 at 11:09 PM, Kovács Krisztián : Segítséget szeretnék kérni m4mfa300 folyamatosan hibára áll. Modul line 3 June 16, 2025 at 11:11 PM, Kovács Krisztián : Line 4* June 16, 2025 at 11:11 PM, Kovács Krisztián : End plate gentry June 16, 2025 at 11:25 PM, Kovács Krisztián : Megoldval June 16, 2025 at 11:29 PM, Denkó Jani (F.A.) : Köszönjük 🤝 Másik gépnél voltunk. Sok a megkeresés és minden ügyintézőnk foglalt 😂 June 16, 2025 at 11:30 PM, Kovács Krisztián : Megértjük. Legyen néktek szerencsés .🦸 June 16, 2025 at 11:46 PM, Kovács Kármen : @Denkó Jani (F.A.) @Gerbovits Kevin line 4 unloadingnál félúton elakadt az üres dunnage. Gyertek légyszives June 16, 2025 at 11:47 PM, Denkó Jani (F.A.) : Megyünk June 16, 2025 at 11:53 PM, Denkó Jani (F.A.) : Kész June 17, 2025 at 12:51 AM June 17, 2025 at 12:51 AM, VK (mcs) : @FA Please check M0STK027 Crane fork left collapse detect 2 June 17, 2025 at 12:52 AM, Denkó Jani (F.A.) : Megyünk June 17, 2025 at 1:02 AM, Gerbovits Kevin : Solved June 17, 2025 at 5:46 AM, VK (mcs) : @FA Please check M0STK035 Crane auto mode fork not home error. June 17, 2025 at 5:59 AM, FACS_오창훈_CHANGHOON : ■ 17th June Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Oh Changhoon June 17, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 6:39 AM, Maczó Anikó : Sziasztok 2f cv029 product detect error A foliázó után el akad az anyag June 17, 2025 at 6:39 AM, Maczó Anikó : Le jött az anyag a raklapról de az tovább ment a raktárba az anyagot meg itt hagyta June 17, 2025 at 6:55 AM, Shakir (MCS) : @FA KINDLY CHECK M0STK021_C01 Crane STK Action 5 min timeover error Thank you June 17, 2025 at 6:55 AM, Shakir (MCS) : @FA Please check M0CNV031_P15_BP01, stop detect error. Thank you June 17, 2025 at 7:06 AM, Édl Tamás : Solved June 17, 2025 at 7:15 AM, Csepi Árpád : @ Sánta László Szia! Hívj fel légyszíves. June 17, 2025 at 7:21 AM, Magosi Erik : @Csepi Árpád dunnage kitöltés megállt félúton a 3ason. Kérlek nézzetek rá June 17, 2025 at 7:21 AM, Magosi Erik : Köszi June 17, 2025 at 7:31 AM, Édl Tamás : We are looking for Korean help with boxpacking. June 17, 2025 at 8:15 AM, 윤성제(Yoon SungJe) : @윤경환 안녕하세요 조장님 전일 7라인 FA팀 에러조치중 실물이 있는 BMA를 EMPTY로 보냈다고 하여 해당 두 팔레트 실물확인이 필요합니다.. 수동출고 가능하실까요? June 17, 2025 at 8:19 AM, 이민영(Minyoung Lee) : An alarm is triggered because the AGVs are close to each other in front of line 8. Please check. June 17, 2025 at 8:19 AM, FA/CS/AGV_ Asjad : Coming June 17, 2025 at 8:25 AM, FA/CS/AGV_ Asjad : Fixed June 17, 2025 at 8:28 AM, 윤경환 : 확인해보겠습니다. June 17, 2025 at 8:37 AM, Shakir (MCS) : @FA KINDLY CHECK M0STK021_C01 Crane STK Action 5 min timeover error Thank you June 17, 2025 at 8:44 AM, Édl Tamás : Solved June 17, 2025 at 9:33 AM, Maczó Anikó : Sziasztok 2f lift hiba a középső soron June 17, 2025 at 9:35 AM, Shakir (MCS) : @FA Please check M0STK025_C01: MCP GF OP1 Light curtain detect error Thank you June 17, 2025 at 9:35 AM, Csepi Árpád : “We are working on it!” June 17, 2025 at 9:54 AM, Maczó Anikó : Sziasztok megállitotuk a gépet ,hogy ne vigye el a raklapot a középső gépnél Cv029 conveyor run time over error Cv029 stop detect error June 17, 2025 at 10:06 AM, Csepi Árpád : Solved June 17, 2025 at 10:11 AM, Édl Tamás : Kész June 17, 2025 at 10:22 AM, Roland : Hello M0STK023 - Crane Fork left collapse error M0STK028 - Same error Can you check it, please? Thank you June 17, 2025 at 10:33 AM, Maczó Anikó : Sziasztok a középső foliázonál le eset a hő fok June 17, 2025 at 10:34 AM, Csepi Árpád : M0STK028 solved June 17, 2025 at 10:36 AM, Shakir (MCS) : @FA Please check M0STK021_C01, Double cargo error. Thank you June 17, 2025 at 10:38 AM, Maczó Anikó : Tárgytalan mert csinálják a foliázot June 17, 2025 at 10:40 AM, Maczó Anikó : Segítséget kérnénk 2 f June 17, 2025 at 10:40 AM, Maczó Anikó : A koreai valamit el nyomot és nem megy tovább az anyag most minden is sipol June 17, 2025 at 10:44 AM, Brázik János : Solved June 17, 2025 at 10:44 AM, Magosi Erik : @Csepi Árpád kérlek gyertek ki a 3as sor tr op2 höz. Felsőburkolat gantry nem viselkedik rendesen June 17, 2025 at 10:44 AM, Magosi Erik : Köszi June 17, 2025 at 10:44 AM, Brázik János : Solved June 17, 2025 at 10:45 AM, Brázik János : Sorri MSTK023 June 17, 2025 at 10:48 AM, Maczó Anikó : Megoldva June 17, 2025 at 11:20 AM, Shakir (MCS) : @FA Please check M0CNV032_P01, stop detect error. Thank you June 17, 2025 at 11:23 AM, Csepi Árpád : @FACS I need assistance! M3MFA300-TR-OP#2 Tray total max over error June 17, 2025 at 11:34 AM, FACS_JaewonShin : I will go soon June 17, 2025 at 11:37 AM, FA/CS/AGV_ Asjad : @FA Kindly check M0STK011 crane error Thanks June 17, 2025 at 11:46 AM, Roland : @FA Check M0STK023 - Crane fork left collapse detect Can you check it please? Thank you June 17, 2025 at 11:47 AM, Brázik János : Solved June 17, 2025 at 11:47 AM, Shakir (MCS) : @FA Please check M0CNV021_P013_BP01, stop detect error. Thank you June 17, 2025 at 11:52 AM, Brázik János : Solved June 17, 2025 at 12:16 PM, Brázik János : Solved June 17, 2025 at 1:13 PM, 윤성제(Yoon SungJe) : 조장님 죄송한데 혹시 이 팔레트 2개 수동출고 되었을까요? June 17, 2025 at 1:22 PM, 윤경환 : 오전에 빈 박스 회수 있어서 진행 못했습니다. 오후에 찾아보겠습니다. June 17, 2025 at 1:22 PM, 윤성제(Yoon SungJe) : 감사합니다 출고 완료되시면 공유 한번 부탁드립니다 June 17, 2025 at 1:39 PM, 윤경환 : M0CN022_M03,04번에 출고 명령 내려놨습니다. June 17, 2025 at 1:40 PM, 윤성제(Yoon SungJe) : 네 지금 내려가겠습니다 June 17, 2025 at 3:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team M0CNV035 1F에 확인 부탁드립니다. 해당구역에 제품이 그대로 정지 상태입니다. June 17, 2025 at 3:31 PM, SKOH2/제조-셀,모듈 출하/김병호 : 북쪽에서 남측으로 넘어가는 이동 구간입니다 June 17, 2025 at 3:31 PM, FACS_JaewonShin : 확인해보겠습니다 June 17, 2025 at 3:44 PM, Sánta László : The empty dunnages are not arriving at line 7. Could someone please look into it? Thank you! June 17, 2025 at 3:46 PM, FACS_JaewonShin : 이동중입니다 June 17, 2025 at 3:48 PM, Shakir (MCS) : @FA please check M0STK026,27&28 STK OOS. Thank you June 17, 2025 at 3:49 PM, 승규 (BAEK SEUNGGYU) : @FA M0STK014_P11_BP01 T702286 cell does not come. Please check. June 17, 2025 at 3:50 PM, Shakir (MCS) : AGV07 on the way June 17, 2025 at 3:50 PM, Sánta László : Thank you so much! June 17, 2025 at 3:59 PM, Shakir (MCS) : @Csepi Árpád please check this, MCS everything good. Carrier not moving. Thank you June 17, 2025 at 4:00 PM, Sánta László : The cell is not arriving at line 7 either. June 17, 2025 at 4:00 PM, Sánta László : Please check it! June 17, 2025 at 4:00 PM, Sánta László : Thank you! June 17, 2025 at 4:02 PM, Roland : Hello. Please check M0CNV022 CV021 div pallet error and work data error! Thank you June 17, 2025 at 4:05 PM, Shakir (MCS) : In which port ? June 17, 2025 at 4:08 PM, 승규 (BAEK SEUNGGYU) : M7MFA300 T702286, T704150 I'm in a hurry to check. I have to come from M0STK012_Z01, but it keeps not coming. June 17, 2025 at 4:09 PM, 배병민 (Bae Byoungmin) : 확인해보니 4번창고로 가는 브릿지에서 UNK 발생하여 멈춰있는 상태입니다 처리바로해드리겠습니다. June 17, 2025 at 4:24 PM, 배병민 (Bae Byoungmin) : @Shakir (MCS) Please put the two pallets in module line 7. They are in warehouse 4. June 17, 2025 at 4:27 PM, Brázik János : Solved June 17, 2025 at 4:27 PM, Brázik János : Solved June 17, 2025 at 4:30 PM, FA/CS/AGV_ Asjad : @FA Please check M0STK011 crane error Thanks June 17, 2025 at 4:32 PM, Sazzad Bhai SKon : T702286 : WRHSLOCCD of the material doesn't match, MES error June 17, 2025 at 4:33 PM, Sazzad Bhai SKon : Meaning there is mismatched in load status, MCS shows full but MES different June 17, 2025 at 4:46 PM, Shakir (MCS) : @FA @Csepi Árpád Please check M0STK037, Crane is not working for long time. Carriers Waiting. Thank you June 17, 2025 at 5:05 PM, 승규 (BAEK SEUNGGYU) : @FA 1F M0STK036 Please check it out. AGV movement is being delayed. June 17, 2025 at 5:09 PM, Shakir (MCS) : @FA Please check M0CNV035_P15_BP01 there is Work Data Error. Thank you June 17, 2025 at 5:14 PM, FA/CS/AGV_ Asjad : @FA Please check M0CNV035 Thanks June 17, 2025 at 5:33 PM, Maczó Anikó : Sziasztok 2f lift hiba June 17, 2025 at 5:35 PM, 배병민 (Bae Byoungmin) : FA technician please take action. June 17, 2025 at 5:35 PM, 배병민 (Bae Byoungmin) : @Csepi Árpád June 17, 2025 at 5:39 PM, Csepi Árpád : Kész June 17, 2025 at 5:40 PM, Csepi Árpád : Solved June 17, 2025 at 5:40 PM, 배병민 (Bae Byoungmin) : Thank you June 17, 2025 at 6:00 PM, Niki (Modul) : Sziasztok! 2.emeletre kérünk karbantartott! Köszönjük! June 17, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.17 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(1): Szabadi Miklós Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(5): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (2): Csanálosi Gábor, Takács Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 17, 2025 at 6:13 PM, Denkó Jani (F.A.) : Megyünk June 17, 2025 at 6:20 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin Line3 nem kap dunnaget. Pls check. June 17, 2025 at 6:58 PM, Gerbovits Kevin : Solved June 17, 2025 at 7:30 PM, Árpi : @Denkó Jani (F.A.) probléma van a formázos átadóval meghalt az AGV - N félig June 17, 2025 at 7:31 PM, FA-CS-AGV-Masoud : Coming June 17, 2025 at 7:31 PM, Árpi : Ajtótól a második kapu June 17, 2025 at 7:31 PM, Denkó Jani (F.A.) : Megy a koma 🫡 June 17, 2025 at 8:15 PM, Kurkó Péter : Hello module 1F Agv 1 charger bar detect sensor off alarm Pls check Thx June 17, 2025 at 8:15 PM, Denkó Jani (F.A.) : Még be se értél.... June 17, 2025 at 8:16 PM, FA-CS-AGV-Masoud : On the way June 17, 2025 at 8:19 PM, FA-CS-AGV-Masoud : Solved June 17, 2025 at 8:19 PM, Kurkó Péter : Thx June 17, 2025 at 8:23 PM, Horváth Adriàn : Line 3 14 AGVn elakadt a dunnage kitöltés közbe. Help pls June 17, 2025 at 8:23 PM, Horváth Adriàn : @Denkó Jani (F.A.) June 17, 2025 at 8:23 PM, FA-CS-AGV-Masoud : Coming June 17, 2025 at 8:37 PM, FA-CS-AGV-Masoud : Solved June 17, 2025 at 9:13 PM, Kovács Kármen : @Denkó Jani (F.A.) @Gerbovits Kevin dock folyosón #14 AGV ACS alive erroral áll. Nézzetek rá légyszi. Köszi June 17, 2025 at 9:14 PM, FA-CS-AGV-Masoud : Coming June 17, 2025 at 9:14 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin Line 4 BMA ki-be töltés és az I/C port is fénykapú hibàval szórakàzik. Nézzetek rà pls June 17, 2025 at 9:14 PM, Denkó Jani (F.A.) : Úton June 17, 2025 at 9:20 PM, Denkó Jani (F.A.) : Solved June 17, 2025 at 9:57 PM, Niki (Modul) : @Denkó Jani (F.A.) fóliázógép nem szakadt el megint! June 17, 2025 at 9:58 PM, Denkó Jani (F.A.) : A fóliázó gép eddig se sűrűn szakadt el csak a fólia 🤗 June 17, 2025 at 9:58 PM, Denkó Jani (F.A.) : De megyünk persze June 17, 2025 at 9:58 PM, Niki (Modul) : Gyorsan írtam na 😆🙈 June 17, 2025 at 10:06 PM, Gerbovits Kevin : Solved June 17, 2025 at 11:11 PM, Kurkó Péter : Hello emeleten a dunnage raktárra valaki nézzen rá köszi June 17, 2025 at 11:11 PM, Denkó Jani (F.A.) : Mindjárt megyünk June 17, 2025 at 11:12 PM, Kurkó Péter : 4es agv is itt hisztizik mert nem tud connectelni a töltővel June 17, 2025 at 11:12 PM, FA-CS-AGV-Masoud : Coming June 17, 2025 at 11:17 PM, FA-CS-AGV-Masoud : Solved June 17, 2025 at 11:23 PM, Denkó Jani (F.A.) : Solved June 17, 2025 at 11:24 PM, VK (mcs) : @FA Please check 2F M0CNV023 (36035) Wrapper sealing not detect. June 17, 2025 at 11:24 PM, Denkó Jani (F.A.) : Checking June 17, 2025 at 11:33 PM, Niki (Modul) : @Denkó Jani (F.A.) 1es gépnél nem fóliázza le az anyagot 2es gépnél fóliázógép előtt megállt az anyag és nem jelez June 17, 2025 at 11:39 PM, Denkó Jani (F.A.) : Megyünk June 18, 2025 at 12:22 AM June 18, 2025 at 12:22 AM, Denkó Jani (F.A.) : @VK (mcs) Please give a destination for the pallet number PS22A-2506110028 on M0CNV023_P31 to M4MFA300_P35, say VC01. Thank you June 18, 2025 at 12:23 AM, VK (mcs) : Checking June 18, 2025 at 12:27 AM, VK (mcs) : MCS still shows it’s on the track (35003) Can you reread carrier ID in CCS? June 18, 2025 at 12:29 AM, Denkó Jani (F.A.) : PS22A-2506110028 June 18, 2025 at 12:33 AM, VK (mcs) : Job created June 18, 2025 at 12:37 AM, VK (mcs) : Inventory move report is fail, I will cancel it and return it to STK. Please apply LR again for that port. thx June 18, 2025 at 12:43 AM, Horváth Adriàn : @Denkó Jani (F.A.) Port újraindítva de az AGV még mindig csak vàrakozik a raktàr elött. June 18, 2025 at 12:43 AM, FA-CS-AGV-Masoud : Coming June 18, 2025 at 12:48 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 12:58 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 1:00 AM, Denkó Jani (F.A.) : This message was deleted. June 18, 2025 at 1:01 AM, Denkó Jani (F.A.) : but why doesn't it work? June 18, 2025 at 1:03 AM, VK (mcs) : I created a job to the STK. Did you manually transfer it on AGV? Location of carrier is NA in system now. June 18, 2025 at 1:04 AM, Denkó Jani (F.A.) : yes, it was moved manually June 18, 2025 at 1:06 AM, VK (mcs) : @김지수PM(Gyuri)_FA Can you please modify AGV # 1 In the line 3/4 module assembly Carrier is installed manually Carrier ID is:PS22A-2506110028 June 18, 2025 at 1:07 AM, Denkó Jani (F.A.) : Please create a task to finally upload it to the M4MFA300-P35 or send it back to the STK June 18, 2025 at 1:09 AM, VK (mcs) : It has a job in system but location is NA, After modification in ACS, I will fix it again. June 18, 2025 at 1:10 AM, Denkó Jani (F.A.) : Ok June 18, 2025 at 1:29 AM, Kurkó Péter : Hello 1F dunnage raktár megint sír valami miatt valaki nézze meg köszi June 18, 2025 at 1:30 AM, FA-CS-AGV-Masoud : Pallet is delivered June 18, 2025 at 1:34 AM, Denkó Jani (F.A.) : Megyünk June 18, 2025 at 1:38 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 1:38 AM, FACS_Hyeongi Son : Returning to the raw material warehouse now June 18, 2025 at 2:12 AM, Niki (Modul) : @Denkó Jani (F.A.) nem megy be az anyag June 18, 2025 at 2:13 AM, Gerbovits Kevin : Megyek June 18, 2025 at 2:18 AM, Gerbovits Kevin : Solved June 18, 2025 at 2:38 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin alapanyagraktàr CV013 stop detect error. Check please June 18, 2025 at 2:47 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 3:24 AM, Kurkó Péter : Hello pls fix it agv3 line7 1f June 18, 2025 at 3:24 AM, Kurkó Péter : Thx June 18, 2025 at 3:25 AM, FA-CS-AGV-Masoud : Hello its the port problem Lift up/ down error thanks June 18, 2025 at 3:26 AM, Kurkó Péter : Ok but agv3 is under the port June 18, 2025 at 3:27 AM, FA-CS-AGV-Masoud : Coming June 18, 2025 at 3:38 AM, Niki (Modul) : @Gerbovits Kevin 1es gépnél fóliázógépen fent akadt a fólia. June 18, 2025 at 3:40 AM, Gerbovits Kevin : Megyünk June 18, 2025 at 3:45 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 3:53 AM, Gerbovits Kevin : Solved June 18, 2025 at 5:56 AM, Horváth Adriàn : Dokk folyosón lehaltak az AGVk. Check pls. June 18, 2025 at 5:57 AM, Mohammad Amir : @FA Please check M0CNV032_P01 there is Stop detect error,it is blocking several jobs. Thank you very much! June 18, 2025 at 6:06 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 13 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Cehmann Zsolt Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Skwarek Tibor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 18, 2025 at 6:13 AM, FA/CS/AGV/Taimur : Sorted by FA team. June 18, 2025 at 6:13 AM, FACS_Wooseok Choi : Sloved June 18, 2025 at 6:14 AM, Mohammad Amir : Thank you very much 🙏. June 18, 2025 at 7:08 AM, 윤성제(Yoon SungJe) : @FA1F module 7 line empty dunnage pallet is not available. Can you check it? June 18, 2025 at 7:09 AM, Döme György F.A : Checking June 18, 2025 at 7:09 AM, Mohammad Amir : Good morning Sir, Currently M0STK037_P12 is OOS that's why supply is disrupted,I already informed FA,they are checking. Thank you very much! June 18, 2025 at 7:19 AM, Mohammad Amir : Update:- Issue has been resolved ✅ AGV#4 on the way with Empty pallet. Thank you very much! June 18, 2025 at 7:20 AM, 윤성제(Yoon SungJe) : Thank you. June 18, 2025 at 7:20 AM, Mohammad Amir : You are welcome! June 18, 2025 at 8:06 AM, Mohammad Amir : @FA @Döme György F.A Please check M0STK023_C01 there is Light curtain detect error and because of this several jobs are pending. Thank you very much! June 18, 2025 at 8:12 AM, Döme György F.A : Checking June 18, 2025 at 8:21 AM, 윤성제(Yoon SungJe) : @FA Please check module GF 4 line END PORT 8 AGV. Thank you. June 18, 2025 at 8:21 AM, FA/CS/AGV/Taimur : Sure June 18, 2025 at 8:28 AM, Döme György F.A : Solved June 18, 2025 at 8:28 AM, Mohammad Amir : Köszönom szepen! June 18, 2025 at 8:28 AM, FA/CS/AGV/Taimur : @MCS The dunnage is not full in OP: M4MFA300_P06 But AGV got load request already. Can you please check. June 18, 2025 at 8:29 AM, Mohammad Amir : Sure,checking. June 18, 2025 at 8:33 AM, Mohammad Amir : Issue has been resolved ✅ Please let me know if you face any further issues. Thank you very much! June 18, 2025 at 8:34 AM, 윤성제(Yoon SungJe) : @MCS U028723 is not in the facility. If it is confirmed that this pallet is in the warehouse, can you delete the job? June 18, 2025 at 8:36 AM, Mohammad Amir : Sure Sir, Please let me know ,is it in the warehouse? In MCS and RTD it's location is not available,last time it was on AGV#14 at 8:13 and afterwards it was manually removed. Thank you very much! June 18, 2025 at 9:05 AM, 윤성제(Yoon SungJe) : U028723 PALLET is under inspection at PQC They seem to have manually ejected PALLET June 18, 2025 at 9:06 AM, Mohammad Amir : Thank you very much for the confirmation. In this case I am cancelling the job. June 18, 2025 at 11:23 AM, 윤성제(Yoon SungJe) : @윤경환 안녕하세요 조장님 PS230-2506040160 수동출고 가능하실까요? 실물 확인이 필요합니다.. June 18, 2025 at 11:25 AM, 윤경환 : 잠시만요. June 18, 2025 at 11:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 모듈도크장 GF 리프트 알람 발생하여 확인 부탁드립니다 June 18, 2025 at 11:29 AM, FACS_오창훈_CHANGHOON : 네 확인하겠습니다 June 18, 2025 at 11:30 AM, 윤경환 : 창고에 있는거 맞나요? WMS, RTD 어디에도 조회가 안됩니다... June 18, 2025 at 11:35 AM, Sazzad Bhai SKon : Because the carrier was deleted on 16/06 at 20:08 by a MCS user, last location was M0CNV022_M03 June 18, 2025 at 11:40 AM, 윤성제(Yoon SungJe) : This message was deleted. June 18, 2025 at 11:40 AM, 윤성제(Yoon SungJe) : 마지막위치는 MCS말대로 M0CNV022_M03입니다 이 위치가 어디인지 FA팀에게 물어볼까요? June 18, 2025 at 11:40 AM, Sazzad Bhai SKon : Yes please, because it was removed from the manual port. June 18, 2025 at 11:43 AM, 윤경환 : M03이면 배출 포트에 나온거 같네요. June 18, 2025 at 11:45 AM, 윤성제(Yoon SungJe) : 그럼 혹시.. empty로 업체로 간 건가요..? June 18, 2025 at 11:48 AM, 윤경환 : 6일날 창고에 들어갔고 13일날 제조 갔다가 사용 되고 16일날 나와서 업체 회수 간거 같네요. June 18, 2025 at 11:49 AM, 윤성제(Yoon SungJe) : 확인 감사드립니다.. June 18, 2025 at 11:55 AM, Szabolcs : @FA M0CNV033_M03 problem. Check please. June 18, 2025 at 11:55 AM, Zoltán Harasztia FA : Megyünk June 18, 2025 at 12:44 PM, Roland : Hello M0STK024 - Double cargo error Can you check it, please? Thank you June 18, 2025 at 12:44 PM, Zoltán Harasztia FA : Megyünk June 18, 2025 at 12:49 PM, Zoltán Harasztia FA : Kész June 18, 2025 at 3:30 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK023_C01 there is Crane fork Right Collapse Detect 1 Error. Thank you very much! June 18, 2025 at 3:31 PM, Döme György F.A : Checking June 18, 2025 at 3:38 PM, Döme György F.A : Solved June 18, 2025 at 3:38 PM, Mohammad Amir : Köszönom szepen 🙏 June 18, 2025 at 3:39 PM, Döme György F.A : Nagyon szívesen! June 18, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (1):Böröcz Tamás Sick (0):- Holiday (1): Kovács Szabolcs, Magyar Balázs Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András , Kiss Balázs , Böröcz Tamás Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 18, 2025 at 7:43 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300_P04 Please check. AGV7 had to put a cell in the facility, but it stopped still. June 18, 2025 at 7:49 PM, FACS_TaehyeongJin : Solved June 18, 2025 at 8:46 PM, 승규 (BAEK SEUNGGYU) : @FA I need help with M3MFA300_P04. June 19, 2025 at 2:38 AM June 19, 2025 at 2:38 AM, FA CS AGV Jawad : @FA can you plz check STK 11 Crane has stuck at bridge June 19, 2025 at 2:39 AM, N.Gábor F.A. : Sure June 19, 2025 at 6:51 AM, 윤성제(Yoon SungJe) : @FA @MCS Module 3 and 4 lines empty dunnage pallet does not come. Can you check it? June 19, 2025 at 6:52 AM, Mohammad Amir : Checking. June 19, 2025 at 6:58 AM, Mohammad Amir : Could you please LR for both lines. Thank you very much! June 19, 2025 at 7:07 AM, Mohammad Amir : Update:- LR received successfully and Empty dunnage on the way to Module line 3&4. ✅ Thank you very much! June 19, 2025 at 7:08 AM, 윤성제(Yoon SungJe) : The pallet is on the move now, thank you so much. June 19, 2025 at 7:08 AM, Mohammad Amir : You are welcome! June 19, 2025 at 8:06 AM, Roland : Hello. Please delete all job at M0CNV022 I released wrong empty packaging. Thank you so much June 19, 2025 at 8:06 AM, Mohammad Amir : Hello, Checking. June 19, 2025 at 8:09 AM, Mohammad Amir : Hello, I have cancelled all the jobs which were inside the STK. Now examining the rest of jobs which came out of STK. Thank you very much! June 19, 2025 at 8:11 AM, Roland : We unloading rest of pallets. Thank you very much! June 19, 2025 at 8:12 AM, Mohammad Amir : Okay , Please unload,Thank you very much! June 19, 2025 at 8:21 AM, Gábor Vercz : Sziasztok. Rá néznétek az OQC portra nem viszi vissza a palettákat. Hibát nem jelez. June 19, 2025 at 8:21 AM, Döme György F.A : Megyünk June 19, 2025 at 8:28 AM, Zoltán Harasztia FA : @Mohammad Amir Hi, could you please help us? There is material Q028838 at port P01 of M0OQC001, but it’s not being returned to the warehouse. Could you please send a command for it to be taken back to the warehouse? Until then, the other material that was requested cannot be issued. June 19, 2025 at 8:30 AM, Sazzad Bhai SKon : This is U028838 June 19, 2025 at 8:31 AM, Zoltán Harasztia FA : Yes June 19, 2025 at 8:31 AM, Mohammad Amir : Issue has been resolved ✅ Please press UR again. Thank you very much! June 19, 2025 at 8:33 AM, Zoltán Harasztia FA : Thank you very much June 19, 2025 at 8:33 AM, Mohammad Amir : You are welcome! June 19, 2025 at 8:34 AM, Mohammad Amir : UR received successfully and Job created at 8:32. ✅ I am monitoring for smooth delivery. Thank you very much! June 19, 2025 at 9:16 AM, Roland : Hello M0STK023 - Crane Fork Left collapse detect error. Megtudjatok nezni kerlek? Koszonom! 🤝 June 19, 2025 at 9:18 AM, Zoltán Harasztia FA : Megyünk June 19, 2025 at 10:39 AM, 윤성제(Yoon SungJe) : @FA Can you check module 7 line 1F small AGV3? The initial alarm is TIME OVER, but now ACS EMERGENCY alarm has occurred. June 19, 2025 at 11:22 AM, Roland : M0STK024 - Crane fork left wide check error. Ratudtok nezni, kerlek? Koszonom June 19, 2025 at 11:27 AM, Korózs Péter Gábor : Sziasztok! (F5032) (OUT LIFT) FLOOR IN POSITION ERROR June 19, 2025 at 11:31 AM, Döme György F.A : Kész June 19, 2025 at 11:37 AM, Korózs Péter Gábor : Köszi! June 19, 2025 at 11:51 AM, Roland : M0STK021 - Double Cargo error Kerlek nezzetek ra. Koszi 🤝 June 19, 2025 at 11:52 AM, Zoltán Harasztia FA : Megyünk June 19, 2025 at 11:57 AM, Zoltán Harasztia FA : Kész June 19, 2025 at 1:34 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK021_C01 there is Crane fork right wide#2 check error. Thank you very much! June 19, 2025 at 1:34 PM, Zoltán Harasztia FA : Cheking June 19, 2025 at 1:47 PM, Zoltán Harasztia FA : Solved June 19, 2025 at 1:50 PM, 윤성제(Yoon SungJe) : @FA Please check module 4 line unloading AGV8. Out1 sensor is unstable. June 19, 2025 at 1:51 PM, 윤성제(Yoon SungJe) : @FA/CS/AGV/Taimur solved.. sorry June 19, 2025 at 1:52 PM, FA/CS/AGV/Taimur : Thank you June 19, 2025 at 3:40 PM, Tóth Gyula : Sziasztok, MOCNV033_M02 Megállt a Dunnage betöltés. June 19, 2025 at 3:41 PM, Döme György F.A : Megyünk June 19, 2025 at 4:20 PM, 유주환(Yoo Joohwan) : @FA 금일 4시 30분 부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 부탁드리니다 June 19, 2025 at 4:20 PM, FA/CS/AGV/Taimur : Sure. June 19, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1): Magyar Balázs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 19, 2025 at 6:30 PM, Tóth Gyula : MOCNV036_M01 Megállt a cella betöltés. June 19, 2025 at 6:31 PM, FA CS AGV Jawad : I am on my way June 19, 2025 at 6:37 PM, N.Gábor F.A. : @Mcs Good afternoon Could you send to the warehouse this palette? PS230-2506110006 Currently in M0MGV046_VC03 June 19, 2025 at 6:39 PM, Shakir (MCS) : @Fa Please check M0STK035_C01 Crane fork collapse error, and P14 DIV pallet detect. Thank you June 19, 2025 at 6:41 PM, Shakir (MCS) : MCS location its on M7MFA300_P29, please confirm it. June 19, 2025 at 6:41 PM, Shakir (MCS) : And the Port is OOS June 19, 2025 at 6:42 PM, N.Gábor F.A. : No Currently on agv M0MGV046_VC03 June 19, 2025 at 6:49 PM, Shakir (MCS) : Now AGV03 transferred to warehouse On the way Thank you June 19, 2025 at 6:49 PM, N.Gábor F.A. : Thank you June 19, 2025 at 6:50 PM, Dávid F.A. : Solved! June 19, 2025 at 6:54 PM, N.Gábor F.A. : @MCS Hello Could you send back to the warehouse this palette? PS230-2506110024 This material is not needed at this time, it was requested by accident. June 19, 2025 at 7:01 PM, Shakir (MCS) : AGV01 assigned transferred to warehouse. AGV on the way Thank you June 19, 2025 at 7:04 PM, N.Gábor F.A. : Thank you June 19, 2025 at 7:31 PM, FA CS AGV Jawad : @N.Gábor F.A. can you plz help at STK 11...Crane has stucked at bridge June 19, 2025 at 7:38 PM, Dávid F.A. : Solved! June 19, 2025 at 7:38 PM, FA CS AGV Jawad : Thanks June 19, 2025 at 8:04 PM, Tóth Gyula : MOCNV036_M01 Megállt a cella betöltés. June 19, 2025 at 8:42 PM, N.Gábor F.A. : @MCS Hello Could you check this palette have a work? T700566 June 19, 2025 at 8:42 PM, Shakir (MCS) : Checking June 19, 2025 at 8:42 PM, N.Gábor F.A. : Thank you June 19, 2025 at 8:45 PM, N.Gábor F.A. : I'll clarify Can you please tell me where this material is? June 19, 2025 at 8:45 PM, Shakir (MCS) : Job completed at destination M3MFA300_P01 on 18:59 And Carrier data remove at 20:33 Thank you June 19, 2025 at 8:45 PM, N.Gábor F.A. : Okay June 19, 2025 at 8:45 PM, N.Gábor F.A. : Thank you June 19, 2025 at 8:46 PM, Shakir (MCS) : This message was deleted. June 19, 2025 at 8:47 PM, Shakir (MCS) : The current location is NA, last location at M3MFA300_P01 after that removed from this port June 19, 2025 at 8:47 PM, N.Gábor F.A. : Yes, i see it Thank you the information June 19, 2025 at 11:35 PM, FA CS AGV Jawad : @Dávid F.A. can you plz help at GF end product storage..?? June 20, 2025 at 12:20 AM June 20, 2025 at 12:20 AM, Dávid F.A. : @Shakir (MCS) Good evening! I would like to ask for help! F2CPM010_P01 is not being delivered, please check! STK011 STK013 warehouse is ready for operation. Thanks June 20, 2025 at 12:26 AM, Shakir (MCS) : Yes, Order is normal now, Just now we received LR and AGV14 with carrier T702987 assigned. On the way. Thank you June 20, 2025 at 12:28 AM, Dávid F.A. : Thank you very much for checking the information! June 20, 2025 at 12:28 AM, Shakir (MCS) : You’re welcome June 20, 2025 at 1:43 AM, Shakir (MCS) : @FA Please check M0CNV023_RTV RTV car distance sensor time delay. Thank you June 20, 2025 at 3:38 AM, Shakir (MCS) : @FA Please check M0STK032_P02 is OOS. And M0CNV023_P44 Light curtain error. Thank you June 20, 2025 at 6:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 20, 2025 at 6:28 AM, Maczó Anikó : Sziasztok 2f 1 gépnél Wrapper wrap clip check ala June 20, 2025 at 6:28 AM, Maczó Anikó : Megállt a foliázó foliázás közben . June 20, 2025 at 6:36 AM, Mohammad Amir : @FA @Csepi Árpád Jó Reggelt, Please check M0CNV033_LF2 there is Work Data Error and one job is pending. Thank you very much! June 20, 2025 at 6:38 AM, Csepi Árpád : Good morning! I’m checking it now. June 20, 2025 at 6:46 AM, Csepi Árpád : Solved June 20, 2025 at 6:50 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 7:06 AM, Csepi Árpád : Kész June 20, 2025 at 8:17 AM, Alexandra : 2f floor in position error, 1f down stop time over June 20, 2025 at 8:59 AM, Mohammad Amir : @Csepi Árpád Please check M0STK024_C01 there is Crane fork left collapse detect 1 Error. Thank you very much! June 20, 2025 at 9:00 AM, Mohammad Amir : @FA @Brázik János Please check M0STK023_C01 there is Light curtain detect error and because of this several jobs are pending. Thank you very much! June 20, 2025 at 9:06 AM, Farkas Kevin : Please check 1F Line #8 UPR case loading gantry. Error: [Tray block placement order NG] June 20, 2025 at 9:06 AM, Farkas Kevin : Also LWR case loading gantry June 20, 2025 at 9:06 AM, Édl Tamás : Solved June 20, 2025 at 9:08 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 9:18 AM, Csepi Árpád : Solved June 20, 2025 at 9:20 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 9:21 AM, Csepi Árpád : Szívesen! June 20, 2025 at 9:24 AM, 윤성제(Yoon SungJe) : @FA Can you support M8MFA300_P17,18? Tray placement order ng error. June 20, 2025 at 9:33 AM, FACS_JaewonShin : Solved June 20, 2025 at 9:39 AM, 윤성제(Yoon SungJe) : 감사합니다 June 20, 2025 at 10:42 AM, Mohammad Amir : @FA @Csepi Árpád . Please check M0STK027_C01 there is Crane Fork Left Collapse Detect 1 Error. Thank you very much! June 20, 2025 at 10:53 AM, Csepi Árpád : Solved June 20, 2025 at 11:00 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 12:30 PM, Mohammad Amir : @FA @Brázik János Please check M0STK023_C01 there is Light curtain detect error. Thank you very much! June 20, 2025 at 12:35 PM, Maczó Anikó : Sziasztok 2f wrapper light curtain detect error Megint le jött az anyag a raklaptól meg állítottuk hogy ne essen le róla June 20, 2025 at 12:40 PM, Brázik János : Solved June 20, 2025 at 12:42 PM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 12:43 PM, FACS_JaewonShin : Light curtain mutting test Location : M0STK035 Time : 13:00 - 종료 시 재보고 드리겠습니다. 35STK 사용이 필요한 경우 알려주시면 재가동 하겠습니다. June 20, 2025 at 12:49 PM, Mohammad Amir : @FA @Brázik János Please check M0STK023_C01 there is Double cargo error. Thank you very much! June 20, 2025 at 1:01 PM, Brázik János : Solved June 20, 2025 at 1:03 PM, Csepi Árpád : Kész June 20, 2025 at 1:11 PM, FACS_JaewonShin : 잡 대기 중으로 재가동 하였습니다. June 20, 2025 at 1:13 PM, Magosi Erik : @Csepi Árpád nem jön alsóburkolat a 3as sorra. Utána tudnál járni miért? Köszike June 20, 2025 at 1:25 PM, 윤성제(Yoon SungJe) : @이민호 MINHO 안녕하세요 pm님 모듈 3라인 lower case(2P18s-r)자재 검색이 안되는데 창고에 없는걸까요? June 20, 2025 at 1:27 PM, Mohammad Amir : Sir, For Module line -3 Port P18/P19(Lower case) there is currently no material available in the warehouse. Thank you very much! June 20, 2025 at 1:28 PM, Mohammad Amir : @Magosi Erik For your information. Thank you very much! June 20, 2025 at 1:31 PM, Mohammad Amir : Additionally, For Module line -3 P34/P35(Lower case buffer) available materials:-0 Thank you very much! June 20, 2025 at 1:32 PM, 윤성제(Yoon SungJe) : Thank you for the information. June 20, 2025 at 1:32 PM, Mohammad Amir : You are most welcome! June 20, 2025 at 1:34 PM, Mohammad Amir : @Csepi Árpád Please check M0STK027_C01 it is OOS . Thank you very much! June 20, 2025 at 1:46 PM, 송호석(Ho seok song) : @이민호 MINHO 해당 건 지급으로 확인 한번 부탁드립니다 피엠님. June 20, 2025 at 1:55 PM, 송호석(Ho seok song) : @윤성제(Yoon SungJe) @이민호 MINHO 해당건 2시반쯤 1700가량 트럭킹 타고 온다고 하고 192개정도가 QI에 묶여있는데 품질 확인 하고 바로 라인 공급 할겁니다 참고하세요. June 20, 2025 at 1:55 PM, 이민호 MINHO : 일부 수량 가용 전환했습니다 입고 진행 부탁드리겠습니다 June 20, 2025 at 1:57 PM, FACS_JaewonShin : Test end Time 13:00-13:50 June 20, 2025 at 1:57 PM, 윤성제(Yoon SungJe) : 지금 JOB생성됐습니다 모니터링 하겠습니다 감사합니다 June 20, 2025 at 2:01 PM, 이민호 MINHO : 감사합니다 June 20, 2025 at 2:14 PM, 윤성제(Yoon SungJe) : @FA Can you check M8MFA300_P17? June 20, 2025 at 2:24 PM, 윤성제(Yoon SungJe) : I misrepresented it. It's M7MFA300_P17. June 20, 2025 at 2:39 PM, Mohammad Amir : This message was deleted. June 20, 2025 at 2:39 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK033_C01 there is Crane SRC Disconnected Error. Thank you ! June 20, 2025 at 2:44 PM, Csepi Árpád : Solved June 20, 2025 at 2:44 PM, Mohammad Amir : Thank you very much 😊 June 20, 2025 at 2:58 PM, Maczó Anikó : Sziasztok 2f 1 gép lift hiba June 20, 2025 at 3:03 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK023_C01 there is Crane Fork Left Collapse Detect 3 Error. Thank you very much! June 20, 2025 at 3:04 PM, Beatrix : Hello! M0CNV021 - CV004 Stop detect error and product detect error. Can you check it? June 20, 2025 at 3:12 PM, Csepi Árpád : Solved June 20, 2025 at 3:14 PM, Brázik János : Solved June 20, 2025 at 3:14 PM, Mohammad Amir : Köszönöm szepen 🙏 June 20, 2025 at 3:31 PM, 유주환(Yoo Joohwan) : @FA 금일 3시 40분 부터 보충전 pallet입고,출고 이동 작업 시작하려 합니다 AGV 정지 부탁드리니다 June 20, 2025 at 3:31 PM, FA/CS/AGV/Taimur : Sure. June 20, 2025 at 3:36 PM, Beatrix : Hello! M0CNV021 - CV021 DIV Pallet Detect error and work data error.. Can you check it? June 20, 2025 at 3:44 PM, 이민호 MINHO : 차량 대기 중인데 현재 Empty 출고 중 에러가 다수 발생하는 것 같습니다 조치 부탁드리겠습니다 June 20, 2025 at 3:47 PM, Brázik János : M0STK021 Solved June 20, 2025 at 4:07 PM, Brázik János : M0STK 031 Crane Fork Right Collapse dectect Solved June 20, 2025 at 4:23 PM, Mohammad Amir : @FA @Brázik János Please check M0STK027_C01 there is Light curtain detect error. Thank you very much! June 20, 2025 at 4:23 PM, FACS_JaewonShin : Stk27 원자재 내 종이커버 감지 June 20, 2025 at 4:23 PM, FACS_JaewonShin : I will restart soon June 20, 2025 at 4:23 PM, Mohammad Amir : Thank you very much! June 20, 2025 at 5:22 PM, FACS_Wooseok Choi : @mcs I will switch manual due to M0STK037 Double Cargo error June 20, 2025 at 5:44 PM, FACS_Wooseok Choi : @Amir(MCS) I disabled original job rack. Please change the job. June 20, 2025 at 5:45 PM, Mohammad Amir : Sir, Please give me carrier id or source and destination. Thank you very much! June 20, 2025 at 5:47 PM, FACS_Wooseok Choi : M0STK37, Carrier id is U030684. Thank you June 20, 2025 at 5:47 PM, Mohammad Amir : Sure Checking June 20, 2025 at 5:49 PM, Mohammad Amir : Sir, Issue has been resolved ✅. Carrier has successfully stored in STK037(0200402). Please let me know if you need any further assistance. Thank you very much! June 20, 2025 at 5:50 PM, Gabor(priv) : Dear Team! Module 1f end of line6 AGV 1-2-3 blocking the route to ev 15& emergency exit. Please move on of the AGV June 20, 2025 at 5:50 PM, FACS_Wooseok Choi : Thank you so much! June 20, 2025 at 5:51 PM, Mohammad Amir : You are most welcome! June 20, 2025 at 5:51 PM, FA CS AGV Jawad : I check it June 20, 2025 at 5:51 PM, Maczó Anikó : Sziasztok 2f lift hiba June 20, 2025 at 5:52 PM, Maczó Anikó : Középső gépnél June 20, 2025 at 6:00 PM, FA CS AGV Jawad : Path cleared June 20, 2025 at 6:09 PM, VK (mcs) : @FA Please check M0STK023 Crane fork right collapse detect 3 June 20, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.20 "B" műszak, 9+1+3/12+2 Tech, 1SL Overtime(1): Kertész Dániel Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kertész Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 20, 2025 at 6:25 PM, Niki (Modul) : Hali @Denkó Jani (F.A.) @Gerbovits Kevin mind 2 lift rossz 1-2 gépnél June 20, 2025 at 6:28 PM, Denkó Jani (F.A.) : Megyünk mindjárt mindenhova June 20, 2025 at 6:29 PM, Denkó Jani (F.A.) : Van most egy pár hiba, idő míg oda érünk mindenhova 🫡 June 20, 2025 at 6:30 PM, 승규 (BAEK SEUNGGYU) : @FA GF M3,M4 Please check the lift floor in position error. June 20, 2025 at 6:31 PM, Denkó Jani (F.A.) : Ok June 20, 2025 at 6:37 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz check STK 11 Crane..? X Fault error June 20, 2025 at 6:42 PM, Denkó Jani (F.A.) : Okés , going.... please wait a litle June 20, 2025 at 6:42 PM, Denkó Jani (F.A.) : Solved June 20, 2025 at 6:52 PM, Niki (Modul) : @Denkó Jani (F.A.) nem megy ki az anyag 🥴 June 20, 2025 at 7:02 PM, Gerbovits Kevin : Solved June 20, 2025 at 7:38 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz chevk STK 11...Crane at alarm June 20, 2025 at 7:51 PM, Gerbovits Kevin : Solved June 20, 2025 at 8:36 PM, Niki (Modul) : @Gerbovits Kevin fóliázógépnél gond van June 20, 2025 at 8:37 PM, Denkó Jani (F.A.) : Megyek June 20, 2025 at 8:46 PM, Denkó Jani (F.A.) : Solved June 21, 2025 at 3:01 AM June 21, 2025 at 3:01 AM, FA CS AGV Jawad : @VK (mcs) can you plz send this pallet back to its origin AGV 09 Pallet ID - U029391 June 21, 2025 at 3:02 AM, VK (mcs) : Checking June 21, 2025 at 3:05 AM, VK (mcs) : Done June 21, 2025 at 3:09 AM, FA CS AGV Jawad : Thankuuzzzz June 21, 2025 at 3:39 AM, FA CS AGV Jawad : @VK (mcs) can u plz send this pallet to its origin AGV 02 1F E. Product Pallet ID U027546 June 21, 2025 at 3:48 AM, VK (mcs) : Transport job created June 21, 2025 at 4:02 AM, Denkó Jani (F.A.) : @VK (mcs) module GF M3MFA300_P03 why are you not getting material? it will decrease and the line will stop. please take action as soon as possible. thank you June 21, 2025 at 4:07 AM, Denkó Jani (F.A.) : @Shakir (MCS) @Shahbaz 샤바즈 MCS/RTD @Mohammad Amir @duzzaman Md (MCS) @Sazzad Bhai SKon @VK (mcs) June 21, 2025 at 4:07 AM, VK (mcs) : Checking June 21, 2025 at 4:14 AM, VK (mcs) : Please check M0STK014 T702904 assigned but it’s not transferring. June 21, 2025 at 4:16 AM, Denkó Jani (F.A.) : Ok deleted June 21, 2025 at 4:18 AM, Denkó Jani (F.A.) : nothing is happening, but production has already changed... June 21, 2025 at 4:18 AM, VK (mcs) : There are also 3 jobs pending they also not transferring. Please check June 21, 2025 at 4:20 AM, Denkó Jani (F.A.) : I will delete all of them. June 21, 2025 at 4:23 AM, VK (mcs) : FYI In case of deletion, Machine should be apply load request again. June 21, 2025 at 4:25 AM, VK (mcs) : Now, another carrier assigned to M3MFA300_P03. June 21, 2025 at 4:28 AM, Denkó Jani (F.A.) : Solved June 21, 2025 at 6:23 AM, FACS_Bareum kim : M0CNV036-RTV Stop for 5 minutes. Sensor check is required. June 21, 2025 at 6:26 AM, FACS_Bareum kim : Solved June 21, 2025 at 7:24 AM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 Crane fork right collapse detect 3 June 21, 2025 at 7:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 21, 2025 at 7:35 AM, Édl Tamás : Solved June 21, 2025 at 8:38 AM, duzzaman Md (MCS) : Please check M0STK035_P13 Stop detect error . Thank you June 21, 2025 at 8:52 AM, Brázik János : Solved June 21, 2025 at 11:05 AM, FA/CS/AGV_ Asjad : @FA Please check M0STK011_P06 crane is not taking pallets. ID: Z101882 Thanks June 21, 2025 at 11:12 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 북측 모듈 도크장 1F M0STk033 - P06-BP01 알람발생하여 확인 바랍니다 June 21, 2025 at 11:13 AM, Csepi Árpád : Solved June 21, 2025 at 11:27 AM, Maczó Anikó : 2f lift hiba June 21, 2025 at 11:32 AM, FACS_Bareum kim : M0CNV33-RTV C/V Stop sensor (X0A32)감지 문제로, 설비 정지하였습니다. 해당센서 Ondelay 0.0->0.5ms 변경 후 정상가동중입니다. June 21, 2025 at 11:41 AM, FACS_Bareum kim : 정정합니다. 해당센서 Ondelay 0.0->0.5s 변경 후 정상가동중입니다. June 21, 2025 at 11:42 AM, Csepi Árpád : Kész June 21, 2025 at 11:53 AM, Maczó Anikó : Hiba ugyan az megint June 21, 2025 at 2:06 PM, Maczó Anikó : Újra fent áll a hiba 😆 June 21, 2025 at 3:26 PM, duzzaman Md (MCS) : @FA Please check M0STK023_C01 Crane fork right collapse detect 1 June 21, 2025 at 3:48 PM, Brázik János : Solved June 21, 2025 at 4:32 PM, Bozó Gyula : Sziasztok! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! June 21, 2025 at 4:44 PM, Csepi Árpád : @duzzaman Md (MCS) Hi! There is a waiting transport that is not moving. M0OQC001_P01 ID: U027551 June 21, 2025 at 4:48 PM, duzzaman Md (MCS) : Issue reaolved. Please raise UR. June 21, 2025 at 4:58 PM, Csepi Árpád : The transport has started. Thank you very much! 😊 June 21, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.21 "B" műszak, 9+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Harasztia Zoltán, Gerbovits Kevin, Denkó János --------------- S June 21, 2025 at 6:34 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin line 7 alsó burkolat gantryhez kérnék egy kis segítséget. Köszii June 21, 2025 at 6:39 PM, Denkó Jani (F.A.) : Photo June 21, 2025 at 6:49 PM, Horváth Adriàn : Felső burkolat Gantry is ✝️ June 21, 2025 at 7:17 PM, Niki (Modul) : Sziasztok! 2.emeletre kérnék karbantartott a fóliázógéphez! Köszönöm! A lift még mindig nem jó lépcsön kell feljönni 🥺 June 21, 2025 at 9:14 PM, VK (mcs) : @FA Please check M0STK032 -port 2 It’s out of service. June 21, 2025 at 9:15 PM, Denkó Jani (F.A.) : Checking June 21, 2025 at 9:20 PM, Denkó Jani (F.A.) : Solved June 21, 2025 at 10:22 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin 3as kis AGV nem mén be a port alà. Check pls. Thx June 21, 2025 at 10:22 PM, Denkó Jani (F.A.) : Megyünk June 21, 2025 at 10:23 PM, Denkó Jani (F.A.) : Lokáció? June 21, 2025 at 10:24 PM, Horváth Adriàn : Line 7 BMA port June 21, 2025 at 10:46 PM, Gerbovits Kevin : @VK (mcs) Please delete this task: M7MFA300-P29 Carrier ID: PS230-2506110030 June 21, 2025 at 10:49 PM, VK (mcs) : Job canceled June 21, 2025 at 10:49 PM, Gerbovits Kevin : Thanks June 21, 2025 at 10:59 PM, Denkó Jani (F.A.) : please delete the data from the port as well June 21, 2025 at 11:00 PM, VK (mcs) : Port is empty now? June 21, 2025 at 11:01 PM, Zoltán Harasztia FA : Yes June 21, 2025 at 11:02 PM, VK (mcs) : Modified June 22, 2025 at 12:18 AM June 22, 2025 at 12:18 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Gerbovits Kevin hibában àll a magasraktàr és nem érkezik dunnage a line 7 végére. Check pls. June 22, 2025 at 12:20 AM, Horváth Adriàn : Solved😁😁 June 22, 2025 at 12:20 AM, Denkó Jani (F.A.) : Te vagy az én emberem 😎🤙🏻 June 22, 2025 at 1:43 AM, VK (mcs) : @FA Please check M0STK022 Crane fork left collapse detect 3 June 22, 2025 at 1:43 AM, Denkó Jani (F.A.) : Megyünk June 22, 2025 at 1:57 AM, Gerbovits Kevin : Solved June 22, 2025 at 2:25 AM, Niki (Modul) : @Zoltán Harasztia FA nem tud kijönni az anyag June 22, 2025 at 2:26 AM, Denkó Jani (F.A.) : Megyünk June 22, 2025 at 4:04 AM, VK (mcs) : @FA Please check 2F M0STK023 MCP 2F OP1 light curtain detect error. June 22, 2025 at 4:04 AM, Zoltán Harasztia FA : Cheking June 22, 2025 at 4:22 AM, Zoltán Harasztia FA : Solved June 22, 2025 at 4:26 AM, Zoltán Harasztia FA : @VK (mcs) Hi, I would like to update some data. The material PS290-2503070014 located at M0CNV023_36_042 has been removed because a trash bag without a crate was sent to the warehouse, and such items are not allowed. Please delete the data from the port. June 22, 2025 at 4:26 AM, VK (mcs) : Checking June 22, 2025 at 4:30 AM, VK (mcs) : Job cancelled and MCS modified. June 22, 2025 at 4:31 AM, Zoltán Harasztia FA : Thank you very much! June 22, 2025 at 4:34 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán line 4 I/C port fényfüggöny hibás. Check pls. June 22, 2025 at 4:34 AM, Denkó Jani (F.A.) : @Boromisza Zoltán hamarosan érkezik June 22, 2025 at 4:34 AM, Denkó Jani (F.A.) : Csak a héten nincs 🫡🤷🏻‍♂️ June 22, 2025 at 4:35 AM, Horváth Adriàn : Jó leszel te meg @Gerbovits Kevin is 🤣 June 22, 2025 at 4:36 AM, Denkó Jani (F.A.) : Nem rá értek..?!😂😂🙄 June 22, 2025 at 4:58 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK012_P10 June 22, 2025 at 5:10 AM, Denkó Jani (F.A.) : Solved June 22, 2025 at 6:37 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 22, 2025 at 7:14 AM, Maczó Anikó : Sziasztok 2f 2 gépnél lift hiba June 22, 2025 at 7:17 AM, Csepi Árpád : Kész June 22, 2025 at 7:17 AM, Maczó Anikó : Köszönöm June 22, 2025 at 7:42 AM, duzzaman Md (MCS) : @FA Please check M0STK014, both cranes “crane travel X distance safety error “ Thanks June 22, 2025 at 7:46 AM, duzzaman Md (MCS) : Also please check the stop detect error on M0CNV023_36_017 June 22, 2025 at 7:49 AM, Édl Tamás : Solved June 22, 2025 at 8:45 AM, FA/CS/AGV_ Asjad : @FA Please check M0OQC001_P01 Thanks June 22, 2025 at 8:56 AM, FA/CS/AGV_ Asjad : @FA Work Data Error June 22, 2025 at 9:03 AM, FACS_오창훈_CHANGHOON : We are solving the problem of module 7 line. We ask the Hungarian technician to take action. June 22, 2025 at 9:06 AM, Magosi Erik : @Csepi Árpád Line3-4 alapanyag lift hmi cv13 stop detect hibában áll. Kérlek csekkolj rá June 22, 2025 at 9:06 AM, Magosi Erik : Köszi June 22, 2025 at 9:11 AM, Csepi Árpád : Kész June 22, 2025 at 9:11 AM, Magosi Erik : Köszi Árpi June 22, 2025 at 12:42 PM, Maczó Anikó : Sziasztok 2f karbantartott kérünk az 1 géphez June 22, 2025 at 1:00 PM, Csepi Árpád : Kész June 22, 2025 at 2:37 PM, Maczó Anikó : Sziasztok 2f 1 gép lift hiba 😁 June 22, 2025 at 2:42 PM, Csepi Árpád : Kész June 22, 2025 at 5:22 PM, Maczó Anikó : Sziasztok 2f cv037 stop detect error June 22, 2025 at 5:35 PM, Csepi Árpád : Kész June 22, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.22 "B" műszak, 7+2+4/12+2 Tech, 1SL Overtime(4): Harasztia Zoltán, Gégény Dávid, Kertész Dániel, Fabriczius Gergely Holiday(3): Pintye Miklós, Gerbovits Kevin, Böröczki Balázs Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Takács Ádám --------------- Assy 1F (2): Gégény Dávid, Fab June 22, 2025 at 6:05 PM, Kurkó Péter : Hello valaki nézzen rá a 7line endplate gantry re köszi June 22, 2025 at 6:22 PM, FACS_Youngmin LEE : solved June 22, 2025 at 9:48 PM, Niki (Modul) : Sziasztok! 2.emeletre kérnék karbantartott! Köszönöm! June 22, 2025 at 9:48 PM, Zoltán Harasztia FA : Megyünk June 23, 2025 at 6:01 AM June 23, 2025 at 6:01 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid, Magyar Balázs June 23, 2025 at 6:24 AM, Mohammad Amir : @FA @N.Gábor F.A. Good morning, Please check M0CNV023_RTV03/04 there is Car fiber communication error and it is blocking many jobs. Thank you very much! June 23, 2025 at 6:25 AM, N.Gábor F.A. : Checking June 23, 2025 at 7:13 AM, FA/CS/AGV_ Asjad : @FA Please check M0STK011 - C/V Data miss match error Thanks June 23, 2025 at 7:24 AM, N.Gábor F.A. : Done June 23, 2025 at 8:15 AM, 윤성제(Yoon SungJe) : @FA Hello, we have a 1 line sample production today. Can you operate the raw material AGV? It is module 1 line. June 23, 2025 at 8:18 AM, Duna Don : Done ✅ June 23, 2025 at 8:21 AM, 윤성제(Yoon SungJe) : Thank you so much! June 23, 2025 at 8:21 AM, Duna Don : You’re welcome! June 23, 2025 at 9:10 AM, Mohammad Amir : @FA Please check and confirm os there any maintenance going on M0STK021 it shows Open door. Because of this several jobs for line -1 Module is pending. Thank you very much! June 23, 2025 at 9:11 AM, N.Gábor F.A. : We are working on it, please be patient. June 23, 2025 at 9:12 AM, Mohammad Amir : Thank you very much for the confirmation! June 23, 2025 at 9:16 AM, Mohammad Amir : @윤성제(Yoon SungJe) For you information: Issue has been resolved ✅. Now pallets on its way to module line-1. Thank you very much! June 23, 2025 at 9:20 AM, 윤성제(Yoon SungJe) : Thank you very much :) June 23, 2025 at 9:20 AM, Mohammad Amir : You are welcome! June 23, 2025 at 9:29 AM, Mohammad Amir : @N.Gábor F.A. @Dávid F.A. Please check M0STK023_C01 there is CRANE fork left collapse detect 2 error. Thank you very much! June 23, 2025 at 9:31 AM, Dávid F.A. : @Mohammad Amir Have a nice day!We are currently working on the problem! June 23, 2025 at 9:31 AM, Mohammad Amir : Good morning! Thank you very much for the confirmation! Have a beautiful day! June 23, 2025 at 10:33 AM, 윤성제(Yoon SungJe) : @Mohammad Amir Hello, the JOB for M1MFA300_P02 T701783 is not generated. Can you check it? This is OUT PORT. June 23, 2025 at 10:35 AM, Mohammad Amir : Hello, Sure, Checking! June 23, 2025 at 10:36 AM, Deepu Divan FA-Eng : @N.Gábor F.A. @Dávid F.A. could you please come to the packaging GF June 23, 2025 at 10:36 AM, Mohammad Amir : Issue has been resolved ✅. Please press UR again. Thank you very much! June 23, 2025 at 10:38 AM, Mohammad Amir : Sir, Update :- Job has been created to return this pallet to warehouse (M0STK011_Z01) successfully ✅. I am monitoring. Thank you very much! June 23, 2025 at 10:39 AM, 윤성제(Yoon SungJe) : Thank you so much, moving AGV number 5 now. June 23, 2025 at 10:40 AM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any further assistance. June 23, 2025 at 10:45 AM, N.Gábor F.A. : Sure Coming June 23, 2025 at 10:46 AM, Mohammad Amir : Sir @윤성제(Yoon SungJe) , For your information:- Mentioned carriers T701783 has successfully stored in warehouse M0STK011(0100803) at 10:45 ✅. Thank you very much! June 23, 2025 at 10:59 AM, Mohammad Amir : This message was deleted. June 23, 2025 at 11:00 AM, Mohammad Amir : @Dávid F.A. @FA Please check M0STK021_C01 there is a crane ankle right detect error. Thank you very much! June 23, 2025 at 11:12 AM, N.Gábor F.A. : Solved June 23, 2025 at 11:13 AM, Mohammad Amir : Thank you very much 🙏 June 23, 2025 at 1:56 PM, Mohammad Amir : @N.Gábor F.A. Please check M0STK021_ C01 there is CRANE fork left collapse detect 3 error and several jobs are getting delayed. Thank you very much! June 23, 2025 at 1:57 PM, N.Gábor F.A. : Checking June 23, 2025 at 2:05 PM, N.Gábor F.A. : Solved June 23, 2025 at 2:05 PM, Mohammad Amir : Thank you very much! June 23, 2025 at 3:28 PM, Beatrix : Hello! M0CNV021: CV007 Stop detect error and CV005 Work Data error. Can you help me? June 23, 2025 at 3:28 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK038_C01 Crane STK action 5 minutes time over error. Thank you very much! June 23, 2025 at 3:33 PM, N.Gábor F.A. : Mindjárt érkezünk June 23, 2025 at 3:40 PM, FACS_오창훈_CHANGHOON : Solved June 23, 2025 at 3:41 PM, Mohammad Amir : Thank you very much! June 23, 2025 at 3:48 PM, N.Gábor F.A. : Solved June 23, 2025 at 4:18 PM, 유주환(Yoo Joohwan) : 통역사 1분만 3라인으로 잠시만 와주세요 June 23, 2025 at 4:22 PM, 유주환(Yoo Joohwan) : @Delosa Viki (데로사) @Botos Viki (빅토리아) @ June 23, 2025 at 4:38 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0CNV023_RTV02 there is car stopper down error and it is blocking materials transfer. Thank you very much! June 23, 2025 at 4:43 PM, 승규 (BAEK SEUNGGYU) : @FA Today, I am going to start moving pallet warehousing and shipment before replenishment. Please support AGV suspension June 23, 2025 at 4:44 PM, FA/CS/AGV_ Asjad : coming June 23, 2025 at 4:49 PM, FA/CS/AGV_ Asjad : The path is clear now, Thanks. June 23, 2025 at 4:57 PM, Mohammad Amir : Thank you very much! June 23, 2025 at 6:10 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(4 Döme György Denkó János Harasztia Zoli Sarvajcz Ferenc June 23, 2025 at 8:49 PM, Shakir (MCS) : @FA Please check M0CNV023_036, Conveyor run time over error. Thank you June 23, 2025 at 8:49 PM, Zoltán Harasztia FA : Cheking June 23, 2025 at 9:02 PM, Zoltán Harasztia FA : Solved June 24, 2025 at 5:36 AM June 24, 2025 at 5:36 AM, András : 2f floor in position error June 24, 2025 at 5:36 AM, Döme György F.A : Megyek June 24, 2025 at 5:37 AM, András : Köszi June 24, 2025 at 5:39 AM, Döme György F.A : Kész June 24, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+1 Overtime (1): Cehman Zsolt Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Cehman Zsolt Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Martina Dávid, Magyar Balázs June 24, 2025 at 7:24 AM, Mohammad Amir : @FA @Dávid F.A. Good morning, Please check M0STK035_C01 there is light curtain detect error. Thank you very much! June 24, 2025 at 7:26 AM, Dávid F.A. : @Mohammad Amir Good morning.. let's check! June 24, 2025 at 7:32 AM, Dávid F.A. : The warehouse is ready for operation! June 24, 2025 at 7:32 AM, Mohammad Amir : Thank you very much 🙏! June 24, 2025 at 8:11 AM, Gábor Vercz : Sziasztok. Rá néznétek az OQC portra? 6:18 kor kértem rá az U027358 as palettákat és még nem érkezett meg. Köszönöm. June 24, 2025 at 8:12 AM, Mohammad Amir : Good morning, Sure,I am checking what is the issue. Thank you very much! June 24, 2025 at 8:14 AM, Mohammad Amir : @Dávid F.A. Please check M0STK032_P14 it is OOS and blocking materials transfer. Thank you very much! June 24, 2025 at 8:14 AM, Mohammad Amir : @Gábor Vercz For your information:- This is the issue. Thank you very much! June 24, 2025 at 8:30 AM, 윤성제(Yoon SungJe) : @이민호 MINHO @윤경환 안녕하세요 pm 모듈 4라인 PF221-2506180009 ENDPLATE인데 전산으로는 480개 들어왔는데 실물은 400개만 입고되었습니다 확인 해 주실수 있으실까요? June 24, 2025 at 8:31 AM, 윤경환 : 네 확인해 보겠습니다. June 24, 2025 at 8:36 AM, Dávid F.A. : @Mohammad Amir Problem solved! Thanks for letting me know. June 24, 2025 at 8:36 AM, 이민호 MINHO : 어제 16시에 라인으로 입고되었는데 어제 입고 시 확인하신 걸까요? June 24, 2025 at 8:37 AM, 윤성제(Yoon SungJe) : 아뇨 전일엔 제가 퇴근해서 확인 못했고 금일 재고확인 시 발견했습니다 June 24, 2025 at 8:37 AM, 윤성제(Yoon SungJe) : 버퍼포트에서 방금 겐트리로 투입되어 라인에 일부 투입되었습니다 June 24, 2025 at 8:38 AM, Mohammad Amir : For your information:- Issue has been resolved and now carrier is on its way ✅. Thank you very much! June 24, 2025 at 8:38 AM, Mohammad Amir : Thank you very much! June 24, 2025 at 8:40 AM, 이민호 MINHO : 최초에 22일에 라인으로 입고되고 23일에 11시에자창으로 다시 재회수되고 다시 16시에 라인 재투입 되었습니다 June 24, 2025 at 8:40 AM, 이민호 MINHO : 이력 상에는 라인에서 일부 소모된 걸로 보입니다 June 24, 2025 at 8:47 AM, Mohammad Amir : Update :- AGV#13 on the way with U027358 to OQC port. ✅ Thank you very much! June 24, 2025 at 9:15 AM, Gábor Vercz : Thank you! June 24, 2025 at 9:16 AM, Mohammad Amir : You are welcome! June 24, 2025 at 10:03 AM, Mohammad Amir : @Dávid F.A. Please check M0STK022_C01 there is Double cargo error. Thank you very much! June 24, 2025 at 10:08 AM, Dávid F.A. : It's ready, thank you for telling me! June 24, 2025 at 10:10 AM, Mohammad Amir : Thank you very much! June 24, 2025 at 12:59 PM, Roland : Hello. Can you check M0STK024 - Double Cargo error, please ? Thank you June 24, 2025 at 1:10 PM, N.Gábor F.A. : Solved June 24, 2025 at 2:00 PM, Mohammad Amir : @N.Gábor F.A. Please check the M0STK025_C01 there is CRANE FORK left wide #1 check error. Thank you very much! June 24, 2025 at 2:02 PM, N.Gábor F.A. : Checking June 24, 2025 at 2:11 PM, Dávid F.A. : It's ready to go! June 24, 2025 at 2:11 PM, Mohammad Amir : Thank you very much 🙏. June 24, 2025 at 3:33 PM, Mohammad Amir : @Dávid F.A. @N.Gábor F.A. Please check M0STK027/28_C01 there is CRANE FORK collapse detect 2 error. Thank you very much! June 24, 2025 at 3:44 PM, Dávid F.A. : The warehouse is ready for operation! Thank you for letting me know! June 24, 2025 at 3:45 PM, Mohammad Amir : Thank you very much 🙏. June 24, 2025 at 4:25 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK037_C01 there is Double cargo error. Thank you very much n June 24, 2025 at 4:25 PM, N.Gábor F.A. : Checking June 24, 2025 at 4:26 PM, Dávid F.A. : It's ready! June 24, 2025 at 4:26 PM, Mohammad Amir : Thank you very much 🙏 June 24, 2025 at 5:31 PM, 승규 (BAEK SEUNGGYU) : @FA Today, I am going to start moving pallet warehousing and shipment before replenishment. Please support AGV suspension June 24, 2025 at 5:32 PM, FA/CS/AGV/Taimur : Sure June 24, 2025 at 5:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 24, 2025 at 5:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남쪽 M0STK037 bank 크레인 정지 상태로 인하여 더니지 입고 작어이 계속 밀리고 있습니다 빠른 확인 바랍니다 June 24, 2025 at 6:00 PM, András : @Roland sziasztok kérni szeretnénk a 2f emeletre üres rak lapokat és zsákokat June 24, 2025 at 6:03 PM, FACS_오창훈_CHANGHOON : 조치 되었습니다 June 24, 2025 at 6:09 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Simon Attila Viczai Tamás Pálosi Róbert ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 24, 2025 at 6:10 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team, MCS/RTD M0CNV033_M02 carrier id : U031380 잡 생성이 안되고 있습니다 확인 부탁드립니다. I can't create a job. Please check it. June 24, 2025 at 6:14 PM, FACS_Hyeongi Son : 목적지 알려주시면 메뉴얼로 반송시켜드리겠습니다 June 24, 2025 at 6:15 PM, VK (mcs) : Do you want to transfer it to which STK? STK37 or 38? June 24, 2025 at 6:16 PM, FACS_Hyeongi Son : 반송중입니다 June 24, 2025 at 6:17 PM, VK (mcs) : @FA Please check 1 F M0CNV035-P15-BP01 It’s out of service. June 24, 2025 at 6:18 PM, FACS_TaehyeongJin : Going June 24, 2025 at 6:22 PM, FACS_TaehyeongJin : Solved June 24, 2025 at 6:39 PM, FA CS AGV Jawad : @VK (mcs) can you plz send this AGV- Pallet back to its source, line isnt working anymore AGV -15 GF End.P Pallet ID - U030393 June 24, 2025 at 6:43 PM, VK (mcs) : Please cancel it first from ACS, then I will transfer it June 24, 2025 at 6:48 PM, FA CS AGV Jawad : @VK (mcs) can you check now..? June 24, 2025 at 6:49 PM, VK (mcs) : Still job exist in ACS. June 24, 2025 at 6:49 PM, FA CS AGV Jawad : Leave it then, thanks. June 24, 2025 at 6:58 PM, 승규 (BAEK SEUNGGYU) : @FA Can you come and help me for a while with only one person who discharges the GF finished product? June 24, 2025 at 7:01 PM, FA CS AGV Jawad : Sure...i am here June 24, 2025 at 7:18 PM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 주임님 명일은 모듈 완제품 출하 계획이 있으실까요? 창고 5섯개가 모두 적재율 97% 이상되어 곧 만제 될꺼 같습니다 June 24, 2025 at 7:25 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 뱅크 5군데 거의 만제라서 해당 내용 인지하고 있습니다. 명일도 사외창고 이관 104셋트 이관 예정이며, 더니지도 104셋트 입고 예정이라 이관수량 및 더니지 입고를 조절해야 할거 같아서 담당 pm님과 협의 후 스케줄 변경시 다시 알림 드리겠습니다. June 24, 2025 at 7:29 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 June 24, 2025 at 7:30 PM, Szabolcs : FACS team, MCS/RTD M0CNV033_M02 carrier id : U031356 잡 생성이 안되고 있습니다 확인 부탁드립니다. I can't create a job. Please check it. June 24, 2025 at 7:32 PM, FACS_Hyeongi Son : 목적지 알랴주시면 메뉴얼 반송 시켜드리겠습니다 June 24, 2025 at 7:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : 그냥 아무 뱅크나 넣어주시면 됩니다 31,32,33,37,38 June 24, 2025 at 7:34 PM, FACS_Hyeongi Son : 반송중입니다 June 24, 2025 at 7:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 June 24, 2025 at 7:36 PM, FACS_Hyeongi Son : U031332도 메뉴얼로 반송 시켜야할까요? 혹시나 잡생성 안되면 알려주세요 매뉴얼로 반송 시켜드리겠습니다 June 24, 2025 at 7:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 June 24, 2025 at 7:39 PM, SKOH2/제조-셀,모듈 출하/김병호 : 그것도 안되는거 같습니다. 부탁드립니다 June 24, 2025 at 7:40 PM, FACS_Hyeongi Son : 넵 알겠습니다 June 24, 2025 at 7:40 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 June 24, 2025 at 8:09 PM, SKOH2/제조-셀,모듈 출하/김병호 : 매니저님 죄송한데요 저희팀 인원이 U031338도 넣어서 이것만 메뉴얼로 넣어주시기 바랍니다. 나머지는 내일 모듈 이관품 배출후에 입고 하도록 하겠습니다 June 24, 2025 at 8:14 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV033_M02 U031338 이것만 마지막으로 수동 입고 부탁드립니다 June 24, 2025 at 8:14 PM, FACS_Hyeongi Son : 넵 잠시만요 이동하겠습니다 June 24, 2025 at 8:19 PM, FACS_Hyeongi Son : 반송중입니더 June 24, 2025 at 9:03 PM, András : 2f CV003 stop detect error June 24, 2025 at 9:03 PM, Zoltán Harasztia FA : Megyek June 25, 2025 at 6:21 AM June 25, 2025 at 6:21 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 25, 2025 at 7:17 AM, Mohammad Amir : Good morning @Csepi Árpád Please check M0STK022_C01 there is double cargo error. Thank you very much! June 25, 2025 at 7:45 AM, Csepi Árpád : Solved June 25, 2025 at 7:45 AM, Mohammad Amir : Thank you very much! June 25, 2025 at 8:56 AM, Maczó Anikó : Sziasztok 2f 2 gépnél lift hiba Köszönöm June 25, 2025 at 9:02 AM, Csepi Árpád : Kész June 25, 2025 at 9:49 AM, Mohammad Amir : @Csepi Árpád Please check M0CNV023_34_010 there is Run Time over error Thank you very much! June 25, 2025 at 9:56 AM, 윤성제(Yoon SungJe) : @FA Hello, module 3,4 lines dunnage pallet is not being supplied, please check June 25, 2025 at 9:56 AM, Mohammad Amir : Sure Checking June 25, 2025 at 10:01 AM, 윤성제(Yoon SungJe) : @배병민 (Bae Byoungmin) 안녕하세요 pm님 모듈 1,3,4라인 전부 더니지 팔레트 공급지연 발생중이며, CV002,003,010 응답대기 알람 발생중입니다 June 25, 2025 at 10:03 AM, Mohammad Amir : Sir, For Module line -3 AGV#9 has been assigned successfully ✅. For Module line-4, Dunnage U030552 on the way ✅. Thank you very much! June 25, 2025 at 10:03 AM, FACS_Wooseok Choi : @Mohammad Amir M0STK011_M01, I want to convert 'carrier size' none please convert June 25, 2025 at 10:04 AM, Sánta László : Hi everyone! None of the module lines are receiving empty dunnage. Please check why the warehouse is not operating. Thank you! June 25, 2025 at 10:04 AM, Mohammad Amir : Sure , Checking! June 25, 2025 at 10:05 AM, 윤성제(Yoon SungJe) : 네 하지만 아직 AGV는 대기중이며 팔렛트는 컨베이어에 막혀 있습니다 June 25, 2025 at 10:06 AM, Mohammad Amir : Hello, For Module line -3 AGV#9 has been assigned successfully ✅. For Module line-4, Dunnage U030552 on the way ✅. For Module line-1, Empty dunnage U030567 on the way ✅. Thank you very much! June 25, 2025 at 10:06 AM, Sánta László : Thank you! (thumbsup) June 25, 2025 at 10:07 AM, Mohammad Amir : @ACS, Please check U030564 ,AGV#9 has assigned but it is not picking the dunnage and it is blocking all dunnage. Thank you very much! June 25, 2025 at 10:07 AM, Mohammad Amir : You are welcome! June 25, 2025 at 10:09 AM, FA/CS/AGV/Taimur : AGV: 09 is picking the Dunnage from CNV31 June 25, 2025 at 10:09 AM, FACS_Wooseok Choi : I delate that. Thank u June 25, 2025 at 10:09 AM, Mohammad Amir : Thank you very much! June 25, 2025 at 10:10 AM, Mohammad Amir : Thank you very much! Data has been removed from MCS and RTD side as well. June 25, 2025 at 10:11 AM, 배병민 (Bae Byoungmin) : 네 셀버퍼창고 에러 조치로 공급에 차질이 있었습니다 June 25, 2025 at 10:13 AM, 윤성제(Yoon SungJe) : 응답 대기는 해결된 것 같은데 지금 AGV는 FA팀이 조치중입니다 June 25, 2025 at 10:16 AM, Mohammad Amir : Sir, Update:- Issue has been resolved by AGV team ✅ and now Material has been picked by AGV#9 and empty dunnage flow to Module-1&3&4 has been normalised. I am monitoring. Thank you very much! June 25, 2025 at 10:18 AM, 윤성제(Yoon SungJe) : 완제품 창고 in/out RTV가 계속 IDLE상태입니다 June 25, 2025 at 10:21 AM, Maczó Anikó : Sziasztok 2f 83023 raktárból nem jön ki az anyag rá tudnátok nézni . Köszönöm June 25, 2025 at 10:23 AM, Sánta László : @Mohammad Amir I know you’re already working on it, I just wanted to let you know that the empty dunnage has arrived at line 3, but we’re still waiting for it at lines 1 and 4. June 25, 2025 at 10:23 AM, 배병민 (Bae Byoungmin) : GF 북측 창고인가요? June 25, 2025 at 10:24 AM, Mohammad Amir : Hello, Currently Empty dunnage U030567 which needs to go to line -1 is waiting for AGV and because of this empty dunnage delivery to line-4 is getting delayed. Everything is okay from MCS RTD side ✅. @AGV please check is there everything good with ACS side cause still AGV did not assign to U030567. Is all AGV busy? Thank you very much! June 25, 2025 at 10:24 AM, Mohammad Amir : @Sánta László for your information! Thank you very much! June 25, 2025 at 10:25 AM, FA/CS/AGV/Taimur : There is a problem with STK31 RTV, it is on Idle without any alarm, causing backlog for dunnage transfer. June 25, 2025 at 10:25 AM, Sánta László : You’re welcome! June 25, 2025 at 10:25 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 북측 모듈 완제품 투입포트에서 화물 UNK 발생되어있습니다. BCR fail입니다 June 25, 2025 at 10:25 AM, 윤성제(Yoon SungJe) : 네 북측 창고입니다 완제품 더니지 배출지연으로 인해 AGV 풀 상태입니다 June 25, 2025 at 10:29 AM, Mohammad Amir : Hello, The M0CNV031_ RTV is not moving because the destination is CNV031_P02 and currently P02 is occupied with U030567 and U030567 is not moving. @FA please check P02. Thank you very much! June 25, 2025 at 10:32 AM, 윤성제(Yoon SungJe) : Yes, the Korean FA team is trying to solve this problem. June 25, 2025 at 10:33 AM, Mohammad Amir : Thank you very much for the confirmation. I am monitoring. June 25, 2025 at 10:35 AM, FACS_Wooseok Choi : @Mohammad Amir m0cnv031 U027490 make a job please. June 25, 2025 at 10:35 AM, Mohammad Amir : Sure , Checking June 25, 2025 at 10:35 AM, FACS_Wooseok Choi : Thank you June 25, 2025 at 10:36 AM, Mohammad Amir : Please let me know the current location of this carrier and where you would like me send this carrier. Thank you very much! June 25, 2025 at 10:37 AM, Alexandra : 2f floor in position error, gf stop time over June 25, 2025 at 10:37 AM, FACS_Wooseok Choi : STK anywhere OK. June 25, 2025 at 10:37 AM, FACS_Wooseok Choi : North June 25, 2025 at 10:38 AM, Mohammad Amir : Sure, Noted , Please tell me current physical location as well. Thank you very much! June 25, 2025 at 10:38 AM, FACS_Wooseok Choi : Already check, i am only wait make to job. June 25, 2025 at 10:39 AM, FACS_Wooseok Choi : Location is good. Thank you June 25, 2025 at 10:40 AM, Mohammad Amir : Sir, In MCS and RTD database currently this carrier has no location that's why I need location afterwards I will be able to create job. Thank you very much! June 25, 2025 at 10:40 AM, Maczó Anikó : Sziasztok 2f 3 gépnél cv026 stop detect error Cv026 slow detect error Köszönöm June 25, 2025 at 10:46 AM, Csepi Árpád : Kész June 25, 2025 at 10:48 AM, Mohammad Amir : @Csepi Árpád . Please check M0CNV031_P31 there is stop detect error and it is blocking materials transfer to Module line -3. Thank you very much! June 25, 2025 at 10:50 AM, Csepi Árpád : Kész June 25, 2025 at 10:51 AM, Mohammad Amir : @윤성제(Yoon SungJe) @FA/CS/AGV/Taimur @Sánta László Update :- Now it seems issue has been resolved and AGV#9 has assigned for U030567 from M0CNV031_P02. ✅ Empty dunnage on the way to Line -1. Afterwards empty dunnage delivery to other lines will be normalised as well. Thank you very much! June 25, 2025 at 10:52 AM, 윤성제(Yoon SungJe) : Thank you, and I am monitoring. June 25, 2025 at 10:52 AM, Mohammad Amir : You are welcome! June 25, 2025 at 10:55 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK023_C01 there is CRANE FORK left wide check error and because of this several jobs are pending. Thank you very much! June 25, 2025 at 10:59 AM, Sánta László : It has arrived, thank you very much! June 25, 2025 at 10:59 AM, Mohammad Amir : You are welcome! June 25, 2025 at 11:06 AM, FACS_오창훈_CHANGHOON : STK 23번 10단 렉장 래핑 제거 작업을 진행해야해서 20분정도 비가동 하겠습니다 June 25, 2025 at 11:09 AM, 배병민 (Bae Byoungmin) : 모듈 1,3,4라인 공더니지 정상 투입완료되었습니다. 북측 완체품 창고 Full 더니지 투입 포트에서 바코드 라벨문제로 BCR fail 되어 이후 모든 AGV들이 화물 적재상태에서 완제품 투입 대기를 하고 있었으며 이로인해 공더니지 투입이 불가 상황이였습니다. 생산에 차질을 드려 죄송합니다. June 25, 2025 at 11:11 AM, 이민영(Minyoung Lee) : 향후 개선에 대해 논의 해 보겠습니다. June 25, 2025 at 11:12 AM, 윤성제(Yoon SungJe) : 고생하셨습니다. 감사합니다 June 25, 2025 at 11:30 AM, Roland : Hello. M0STK023 - Crane Fork Left wide error. Megtudjatok nezni, kerlek a hibat? Koszonom June 25, 2025 at 11:32 AM, 배병민 (Bae Byoungmin) : 조치 완료 되셨나요? June 25, 2025 at 11:36 AM, FACS_JaewonShin : 랙장안의 문제라 인터락 해제하고 이동해야합니다 30분정도 더 소요될거같습니다. 근처 다른렉장도 같이 조치하겠습니다 랩 튀어나온데가 더있네요 June 25, 2025 at 11:40 AM, 배병민 (Bae Byoungmin) : 우선 랩 문제구간만 제거하시고 다른데는 명령 Job 완료후에 해주세요 Job 5개 밀려있습니다 June 25, 2025 at 11:59 AM, 윤성제(Yoon SungJe) : @Mohammad Amir JOBs for M8MFA300_P19,SMP2506020010 are not generated. Can you check? June 25, 2025 at 11:59 AM, Mohammad Amir : Sure, Checking! June 25, 2025 at 12:02 PM, Mohammad Amir : Sir, I have resolved the issue ✅. Please press UR again. Thank you very much! June 25, 2025 at 12:03 PM, Mohammad Amir : Sir, Job has been created successfully to STK24 ✅ I am monitoring for smooth delivery. Thank you very much! June 25, 2025 at 12:04 PM, 윤성제(Yoon SungJe) : It has been created. Thank you. May I know what the cause is? June 25, 2025 at 12:05 PM, Mohammad Amir : You are welcome! UR was failing because from MCS and RTD database this carrier had different place. Feel free to ask me if you need further information. June 25, 2025 at 12:07 PM, 윤성제(Yoon SungJe) : I understand. Thank you very much. June 25, 2025 at 12:08 PM, Sánta László : At the end of line 3, an AGV is stopped due to an error. Please take a look at it. Thank you! June 25, 2025 at 12:08 PM, Mohammad Amir : You are welcome,Sir. June 25, 2025 at 12:08 PM, Duna Don : Checking June 25, 2025 at 12:09 PM, FACS_JaewonShin : 재가동 중입니다 June 25, 2025 at 1:17 PM, Mohammad Amir : @Csepi Árpád Please check M0CNV023_35_028 wrapper heater temp alarm. Thank you very much! June 25, 2025 at 1:18 PM, FACS_오창훈_CHANGHOON : I'm checking June 25, 2025 at 1:19 PM, FACS_오창훈_CHANGHOON : Solved June 25, 2025 at 1:19 PM, Mohammad Amir : Thank you very much! June 25, 2025 at 1:43 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK027/28-C01 there is CRANE FORK left collapse detect 2 error. Thank you very much! June 25, 2025 at 1:49 PM, FACS_Wooseok Choi : I need a forklift crew because the wrong product has arrived at the F0BPM012 June 25, 2025 at 1:53 PM, Csepi Árpád : M0STK027. solved June 25, 2025 at 1:53 PM, Mohammad Amir : Thank you very much! June 25, 2025 at 1:53 PM, 배병민 (Bae Byoungmin) : 박스 해체기 배출쪽인가요? June 25, 2025 at 1:56 PM, FACS_Wooseok Choi : 포장기 투입 쪽이었습니다. June 25, 2025 at 1:56 PM, Édl Tamás : M0STK028 solved June 25, 2025 at 1:56 PM, Mohammad Amir : Thank you very much! June 25, 2025 at 2:39 PM, 승규 (BAEK SEUNGGYU) : @FA GF 3,4Line Please check raw material AGV number 3. ACS error June 25, 2025 at 2:45 PM, FA/CS/AGV/Taimur : Solved. June 25, 2025 at 6:07 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.25. "B" műszak, 11+2+2/12+2 Tech, 1SL Overtime(2): Gégény Dávid, Kertész Dániel Holiday(1): Böröczki Balázs Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Kovács Ágnes --------------- Assy 1F (3): Gégény Dávid, Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovits Kevin, Denkó János, June 25, 2025 at 6:12 PM, FA CS AGV Jawad : @FA can you plz help, a pallet has stucked at End product storage June 25, 2025 at 6:34 PM, FACS_TaehyeongJin : Solved June 25, 2025 at 6:34 PM, FA CS AGV Jawad : Thanks June 25, 2025 at 7:24 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.06.25 2.Machine name : -M0STK022 3. Action detail : -이중입고 감지센서 점검 4.Work time -Start : 19:22 -End : 5. Remark(special note) : -X June 25, 2025 at 7:34 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.06.25 2.Machine name : -M0STK022 3. Action detail : -이중입고 감지센서 점검 4.Work time -Start : 19:22 -End : 19:34 5. Remark(special note) : -X June 25, 2025 at 8:01 PM, Kurkó Péter : Hello 1line 2 kis agv nagyon szereti egymást a sor elején valaki csinálja meg köszi June 25, 2025 at 8:01 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz help at STK 11 crane alarm June 25, 2025 at 8:01 PM, Denkó Jani (F.A.) : Megyünk June 25, 2025 at 8:05 PM, Gerbovits Kevin : Solved June 25, 2025 at 9:50 PM, VK (mcs) : @FA Please check 2F M0STK023 MCP 2F OP1 light curtain detect error Also please check M0STK025 Crane fork right collapse detect 1 June 25, 2025 at 10:04 PM, Denkó Jani (F.A.) : Stk25 solved June 25, 2025 at 10:07 PM, FACS_Hyeongi Son : Stk23 also solved June 25, 2025 at 11:18 PM, Kovács Krisztián : Modul Egyes blokk elején vár valamire egy agv . Segítség kellene útba igazítani. June 25, 2025 at 11:20 PM, Denkó Jani (F.A.) : Megyünk June 25, 2025 at 11:28 PM, VK (mcs) : @FA. @Manufacturing There is transport Job for 1st module assembly port 30 M1MFA300_P30 But port is out of service, and carrier is waiting in the conveyor. Please check it out. June 25, 2025 at 11:31 PM, Denkó Jani (F.A.) : Solved June 25, 2025 at 11:33 PM, Denkó Jani (F.A.) : Solved maybe June 26, 2025 at 12:15 AM June 26, 2025 at 12:15 AM, Kurkó Péter : Hello 1line agv 2 megállt a port alatt valaki nézze meg köszi June 26, 2025 at 12:20 AM, FA CS AGV Jawad : Solved June 26, 2025 at 1:03 AM, VK (mcs) : @FA Please check M0STK032-P02 It's out of service. Thx June 26, 2025 at 1:06 AM, Boromisza Zoltán : Okey June 26, 2025 at 1:07 AM, Boromisza Zoltán : Solved June 26, 2025 at 1:39 AM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz check STK 11 crane ? June 26, 2025 at 1:39 AM, Denkó Jani (F.A.) : Megyek June 26, 2025 at 4:40 AM, Horváth Adriàn : @Denkó Jani (F.A.) line 3 vége AGVn megakadt a cumo 😁 June 26, 2025 at 4:45 AM, FA CS AGV Jawad : Dome June 26, 2025 at 6:32 AM, Farkas Misi : Jó reggelt! Szeretnék segítséget kérni! M0STK037 raktár meg állt. June 26, 2025 at 6:40 AM, Shakir (MCS) : @FA M0STK 021_C01 MCP 2F OP2 light curtain detect error. Thank you June 26, 2025 at 6:46 AM, Édl Tamás : Solved June 26, 2025 at 6:50 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 26, 2025 at 6:50 AM, Brázik János : Kész June 26, 2025 at 7:44 AM, Shakir (MCS) : @FA Please check M0CNV032_P01 there is Stop detect error. Thank you June 26, 2025 at 8:01 AM, FACS_Bareum kim : M0CNV032_P01 [F5663] CV14 STOP DETECT Error X0862 Sensor Hunting Ondelay 1->1.5 Delay increment. June 26, 2025 at 11:26 AM, Shakir (MCS) : @FA M0STK 025_C01 MCP 2F OP2 light curtain detect error. Thank you June 26, 2025 at 11:27 AM, Shakir (MCS) : @FA Please check M0STK022_C01 there is Crane shelf in abort (double cargo). Thank you June 26, 2025 at 11:31 AM, Brázik János : Solved June 26, 2025 at 12:31 PM, Sánta László : @Csepi Árpád egyes soron a kettes block mellett lévő bufferek fénysorompóit be tudnátok állítani? Két helyen sem jó, ami miatt nem tudjuk automata üzemmódba helyezni a portot. Előre is köszönöm! June 26, 2025 at 12:52 PM, Csepi Árpád : Kész June 26, 2025 at 12:59 PM, Sánta László : Köszönöm szépen! June 26, 2025 at 1:11 PM, 윤성제(Yoon SungJe) : @MCS Hello, can you delete the JOB for M1MFA300_P21,W000102 and send the carrier that is being transferred to the warehouse? Operator manually placed the palette on P21 June 26, 2025 at 1:15 PM, Sazzad Bhai SKon : Transfer initiated June 26, 2025 at 1:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 26, 2025 at 1:51 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 북측 모듈 도크장 GF M0CNV033_LF02 기동 정지 상태입니다 확인 부탁드립니다 June 26, 2025 at 1:52 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 26, 2025 at 1:52 PM, SKOH2/제조-셀,모듈 출하/김병호 : out lift 알람입니다 June 26, 2025 at 2:09 PM, SKOH2/제조-셀,모듈 출하/김병호 : 저희 출하 작업중이라 빠른 확인 부탁드맂니다. June 26, 2025 at 2:16 PM, SKOH2/제조-셀,모듈 출하/김병호 : 저희 리프트 조치가 30분정도 아무도 대응을 안해주고 계신데 …언제쯤 확인 되실까요??? June 26, 2025 at 2:22 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_tema @배병민 (Bae Byoungmin) @FA 북측 모듈 도크장 GF M0CNV033_LF02 알람발생하여 기동 정지 상태입니다. 해당 알람 발생 30분이 넘었는데도 아무런 조치가 되지 않고있어 금일 이관작업이 지연되고 있습니다 빠름 확인 부탁드립니다 June 26, 2025 at 2:22 PM, KIM SEYEON [김세연]_FA : @FACS_JaewonShin 팀장님 확인 부탁드립니다 June 26, 2025 at 2:23 PM, 배병민 (Bae Byoungmin) : 팀장님 Weekly 미팅중입니다. 테크니션 확인 해보라고 하겠습니다 June 26, 2025 at 2:26 PM, 배병민 (Bae Byoungmin) : Please check this issue quickly. MpCNV033_LF02 left error June 26, 2025 at 2:27 PM, 배병민 (Bae Byoungmin) : 테크니션 확인 요청해두었습니다. 저의 테큰션으로 요청시 불편하시겠지만 영문으로 기재부탁드립니다 June 26, 2025 at 2:47 PM, Roland : Hello. Megtudjatok nezni a M0STK022 es raktarat? Varakozik jo par raklap es nem akar kijonni, hibat nem ir. Koszonom June 26, 2025 at 2:55 PM, Csepi Árpád : Kész June 26, 2025 at 2:58 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다 영문도 같이 신청드리겠습니다. 그래도 현장확인이 40분넘게 안되서 작업지연된 상황이어서 말씀드리는겁니다. 다음부터는 영문으로도 기재 드리겠지만, 영문/국문 상관없이 내용도 한번 확인 부탁드립니다. June 26, 2025 at 2:59 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 26, 2025 at 3:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 June 26, 2025 at 3:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam,RTD/MCS 북측 모듈 창고 1F M0CNV033_RTV01 기동 중지 상태입니다. 알람이 없는데 움직이지 않습니다. 더니지 입고중이라 빠른확인 부탁드립니다. June 26, 2025 at 3:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam, RTD/MCS North module warehouse 1F M0CNV033_RTV01 It is in a state of stop operation. There is no alarm It doesn’t move. dunnage is in stock, so please check it as soon as possible. June 26, 2025 at 3:55 PM, Csepi Árpád : Solved June 26, 2025 at 4:18 PM, Alexandra : 2f cv031 stop detect error, slow detect error June 26, 2025 at 6:07 PM, duzzaman Md (MCS) : @FA Please check M0STK035_C02 there is CRANE FORK left collapse detect 4 error. Thank you ! June 26, 2025 at 6:12 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz check STK 11 crane June 26, 2025 at 6:13 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.26. "B" műszak, 10+2+1/12+2 Tech, 1SL Overtime(1): Fabriczius Gergely Holiday(2): Böröczki Balázs, Csanálosi Gábor Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Por: Rácz Dániel, Nagy Sándor(op) Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Kovács Ágnes, Fabriczius Gergely NC Op: Gombos Norbert --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovi June 26, 2025 at 8:33 PM, Ákos (Modul 2.E.) : Sziasztok a második emeletre karbantartot kérek szépen nem megy be az anyag a raktárba köszönöm June 26, 2025 at 8:56 PM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz check STK 12, crane has stopped June 26, 2025 at 9:00 PM, Gerbovits Kevin : Going June 26, 2025 at 9:17 PM, duzzaman Md (MCS) : @FA Please check M0STK033_C01 MCP GF OP1 LIGHT CURTAIN DETECT ERROR Thank you June 26, 2025 at 9:38 PM, duzzaman Md (MCS) : FYI M0STK012 is at 100% capacity. Thank you! June 26, 2025 at 9:39 PM, Gerbovits Kevin : Solved June 26, 2025 at 9:48 PM, Denkó Jani (F.A.) : Solved June 26, 2025 at 9:50 PM, FA CS AGV Jawad : @duzzaman Md (MCS) is it possible to increase priority for STK12, inport...too many AGVs are in line for unload June 26, 2025 at 9:52 PM, FA CS AGV Jawad : Is it possibe to reroute AGVs to other storage June 26, 2025 at 9:55 PM, duzzaman Md (MCS) : @SCS Please check this issue June 26, 2025 at 10:10 PM, FA CS AGV Jawad : 7 AGVs are in line for STK12 and AGVs charging has reached to 55%...plz take action June 26, 2025 at 10:45 PM, FACS_Youngmin LEE : @duzzaman Md (MCS) plz make job carrier id:T701936 out port: M0STK12_P10 June 26, 2025 at 10:54 PM, duzzaman Md (MCS) : Could you tell me where you'd like it to be sent. Current location M0STK012_P10 June 26, 2025 at 11:00 PM, FACS_Youngmin LEE : anywhere June 26, 2025 at 11:04 PM, duzzaman Md (MCS) : Job has been created for the carrier June 26, 2025 at 11:05 PM, FACS_Youngmin LEE : 현재 STK12 창고가 Full 상태이며 창고로 파레트를 넣으려는 AGV가 9대이고 파레트를 배출하려는 AGV는 0대 입니다. 배출 잡 생성하여 순환되게 하려고 노력중이지만 시간이 조금 소요될 것 같습니다. June 26, 2025 at 11:07 PM, 배병민 (Bae Byoungmin) : 브릿지 상태 확인 부탁드릴께요 이동 방향 셀버퍼 3창고 > 1창고 셀버퍼 2창고 > 4창고 이렇게 되어 있는게 맞는지... June 26, 2025 at 11:12 PM, 배병민 (Bae Byoungmin) : Job이 셀버퍼 2창고_P09번으로 AGV 목적지가 다잡혀있나요? June 26, 2025 at 11:12 PM, FACS_Youngmin LEE : 네 맞습니다. June 26, 2025 at 11:14 PM, 배병민 (Bae Byoungmin) : 4창고 적재율은 여유있죠? June 26, 2025 at 11:15 PM, FACS_Youngmin LEE : This message was deleted. June 26, 2025 at 11:15 PM, FACS_Youngmin LEE : 92.10%입니다. June 26, 2025 at 11:16 PM, 배병민 (Bae Byoungmin) : 그럼 잠시 2창고 P09입고 포트 Disable 잡으시고 지금 AGV 이동중인 화물 순차적으로 매뉴얼로 하나씩 4번창고 포트 2군대로 이동해야 겠습니다 June 26, 2025 at 11:26 PM, FACS_Youngmin LEE : @duzzaman Md (MCS) plz make job carrier id:T701936 out port: M0STK12_P10 June 26, 2025 at 11:28 PM, duzzaman Md (MCS) : Job created June 26, 2025 at 11:59 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE 주임님 상황은 좀 해결되었을까요? June 27, 2025 at 12:01 AM June 27, 2025 at 12:01 AM, FACS_Youngmin LEE : STK11 Full 16.32% Empty 83.68% STK12 Full 90.31% Empty 9.69% STK13 Full 6.73% Empty 93.27% STK14 Full 89.41% Empty 10.59% June 27, 2025 at 12:02 AM, FACS_Youngmin LEE : 네 현재 입고 디스에이블 후 출고 우선순위로 빼내고 있습니다. June 27, 2025 at 12:03 AM, FACS_Youngmin LEE : 창고 여유 공간을 확보한 후 입고 진행하도록 하면 원활하게 반송 진행될 것 같습니다. June 27, 2025 at 2:40 AM, FA CS AGV Jawad : @Denkó Jani (F.A.) can you plz check end product storage alarn June 27, 2025 at 2:41 AM, Denkó Jani (F.A.) : Going June 27, 2025 at 2:50 AM, Denkó Jani (F.A.) : Solved June 27, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 27, 2025 at 10:16 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK035_C01 there is CRANE fork left collapse detect 4 error, several jobs are pending. Thank you very much! June 27, 2025 at 10:21 AM, N.Gábor F.A. : Checking June 27, 2025 at 10:23 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 팀장님 35번창고 콜랩스 알람 발생원인이 약간으 팔레트 틀어짐으로 4번 센서가 반복적으로 감지되고 있습니다. 틀어지는 위치 확인하시어 재발 방지 부탁합니다 June 27, 2025 at 10:24 AM, FACS_JaewonShin : 알겠습니다 June 27, 2025 at 10:24 AM, 송호석(Ho seok song) : @배병민 (Bae Byoungmin) @윤성제(Yoon SungJe) 저희 라인 가동수가 늘면서 엠티 더니지/언로딩 더니지 공급 순환이 잘 이루어지는지도 같이 확인 부탁드립니다. 1라인 빈더니지 공급이 늦어 모듈 배출 대기 상태로 비가동 중이였습니다(잡은 잡혀 있던 상태) June 27, 2025 at 10:25 AM, N.Gábor F.A. : Solved June 27, 2025 at 10:25 AM, Dávid F.A. : The warehouse is ready for operation, thank you for letting me know! June 27, 2025 at 10:26 AM, Mohammad Amir : This message was deleted. June 27, 2025 at 10:26 AM, Mohammad Amir : Thank you very much! 🙏 June 27, 2025 at 10:27 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 완제품쪽 AGV 8대가동중일껀데 1라인 생산 감안하여 Capa 부족하지 않은지 모니터링 부탁합니다. June 27, 2025 at 10:30 AM, 배병민 (Bae Byoungmin) : @FA/CS/AGV/Taimur Please help together verify this and share it with me. June 27, 2025 at 10:31 AM, FA/CS/AGV/Taimur : Yes sir. We are going to ramp up the AGV number. June 27, 2025 at 10:31 AM, Dávid F.A. : 팔레트가 살짝 겹쳐 있었어요! 센서는 정상 작동했어요! 조정 후! 오류가 해결되었습니다! June 27, 2025 at 10:32 AM, 송호석(Ho seok song) : @배병민 (Bae Byoungmin) GF : 연말까지 1/3/4Line full 가동. 1F : 8월부터 7/8Line 추가 가동 (GF 1/3/4 Line은 지속 Operating) 참고하셔요. June 27, 2025 at 10:33 AM, 배병민 (Bae Byoungmin) : 네 공유 감사드립니다. June 27, 2025 at 11:37 AM, Roland : Hello, Can you delete M0CNV022 all jobs please? Thank you June 27, 2025 at 11:37 AM, Mohammad Amir : Sure Checking! June 27, 2025 at 11:40 AM, Mohammad Amir : Hello, I have cancelled all the jobs which are inside STK successfully ✅. Three materials already out from the STK and heading to M03 , please unload these plates from M03 as if I cancel it will cause hurdles in materials flow. Thank you very much! June 27, 2025 at 11:40 AM, Roland : Thank you June 27, 2025 at 11:41 AM, Mohammad Amir : You are welcome! Let me know if you need any further assistance. June 27, 2025 at 1:17 PM, 윤성제(Yoon SungJe) : @MCS Hello, may I know what this JOB is, M4MFA300_P06,U028711? There is no carrier to be discharged in this port. June 27, 2025 at 1:21 PM, Mohammad Amir : Sure, Checking! June 27, 2025 at 1:23 PM, Mohammad Amir : Hello This carrier has a job to go to M0CNV033_M03 currently it is on AG #10. Please let me know if you need further information. Thank you very much! June 27, 2025 at 1:26 PM, 윤성제(Yoon SungJe) : However, there is nothing on AGV10. June 27, 2025 at 1:28 PM, FA/CS/AGV/Taimur : Please delete the job for agv: 10 from M4MFA300_P06 as dunnage is not ready for transfer. June 27, 2025 at 1:29 PM, Mohammad Amir : It our MCS data base it shows it is currently on AGV#10 assigned. In this case I will cancel the job. Thank you very much! June 27, 2025 at 1:29 PM, Mohammad Amir : Thank you very much for the confirmation! June 27, 2025 at 1:30 PM, Mohammad Amir : @FA/CS/AGV/Taimur @윤성제(Yoon SungJe) Job has been cancelled Successfully ✅. Thank you very much! June 27, 2025 at 1:30 PM, 윤성제(Yoon SungJe) : Thank you so much~ June 27, 2025 at 1:30 PM, FA/CS/AGV/Taimur : Nagyon Jo June 27, 2025 at 1:30 PM, Mohammad Amir : You are welcome! June 27, 2025 at 1:31 PM, Mohammad Amir : Köszönöm szepen 🙏. June 27, 2025 at 2:00 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team,@MCS/RTD location : M0STK031-0201406 carrier id : U028711 현재 RTD상에서 적치 위치가 M4MFA300_P06 이어서 잡생성후 배출이 진행 되지 않습니다 빠른 확인 바랍니다 June 27, 2025 at 2:02 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team,@MCS/RTD location : M0STK031-0201406 carrier id : U028711 On the current RTD, the position is M4MFA300_P06. The work does not proceed after creating the job June 27, 2025 at 2:03 PM, Mohammad Amir : Sure, Checking! June 27, 2025 at 2:05 PM, N.Gábor F.A. : This message was deleted. June 27, 2025 at 2:05 PM, Mohammad Amir : Job was terminated on the request of operation that's why it not moving. Thank you very much! June 27, 2025 at 2:07 PM, N.Gábor F.A. : This message was deleted. June 27, 2025 at 2:08 PM, Mohammad Amir : Sir, Please let me know where you would like to receive this pallet ,i will send. Thank you very much! June 27, 2025 at 2:09 PM, N.Gábor F.A. : Don't need it According to scs, the pallet is already in the warehouse at the given position. There is already another pallet on the M4MFA300_P06 port. June 27, 2025 at 2:11 PM, Mohammad Amir : Hello, Are you referring to U028711 , according to our database it still located at M4MFA300_P06. Thank you very much! June 27, 2025 at 2:12 PM, N.Gábor F.A. : Yes, I'm referring to that palette, there is already a different number of palettes on that port. June 27, 2025 at 2:17 PM, Mohammad Amir : Hello, For your information:- All the jobs for U028711 which was created from M4MFA300_P06 to CNV033_M03 was created manually by RTD user "outbound" so it was manually created jobs. And on the request of operation as dunnage is still not ready so i cancelled the Job. So now please confirm is U028711 actually exists on M4MFA300_P06? Thank you very much! June 27, 2025 at 2:20 PM, N.Gábor F.A. : U028711 is no longer physically on port M4MFA300_P06. According to SCS, it is currently at location M0STK031, 0201406. June 27, 2025 at 2:23 PM, Mohammad Amir : Thank you very much for the confirmation. I have updated the information in our MCS and RTD database as well. June 27, 2025 at 2:23 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV033_M03 port June 27, 2025 at 2:23 PM, SKOH2/제조-셀,모듈 출하/김병호 : Please move here. June 27, 2025 at 2:23 PM, Mohammad Amir : Sur Sir, Working on it. June 27, 2025 at 2:25 PM, Mohammad Amir : Sir, Job has been created successfully ✅. Carrier on its way to M03 . I am monitoring for smooth delivery. Thank you very much! June 27, 2025 at 2:25 PM, SKOH2/제조-셀,모듈 출하/김병호 : SCS is checking. Grateful June 27, 2025 at 2:32 PM, Mohammad Amir : Sir, Update :- Pallet U028711 has successfully arrived at M0CNV033_M03 at 14:32 ✅. Please collect it from M03. Feel free to contact me again if you need further assistance. Thank you very much! June 27, 2025 at 2:59 PM, Mohammad Amir : @Dávid F.A. Please check M0CNV023_36_035 wrapper heater temp alarm. Thank you very much! June 27, 2025 at 3:07 PM, Dávid F.A. : I checked! PLC colleagues are currently working on this section, there may be a stoppage in this part! Thank you for letting us know! June 27, 2025 at 3:07 PM, Mohammad Amir : Thank you very much for the confirmation! June 27, 2025 at 3:45 PM, FACS_Wooseok Choi : This message was deleted. June 27, 2025 at 3:45 PM, FACS_Wooseok Choi : We'll change plc logic. Now Add logic to delay door muting by 1 second, it works good. Thank u for confirming. June 27, 2025 at 4:04 PM, Dávid F.A. : I would like to request information and confirmation! Do you work in section M0CNV023_34_035? June 27, 2025 at 4:31 PM, FACS_Wooseok Choi : Yes, I was working on it and got it done. June 27, 2025 at 4:32 PM, Dávid F.A. : Thank you very much for the information! June 27, 2025 at 4:34 PM, FACS_Wooseok Choi : You are welcome June 27, 2025 at 5:02 PM, 승규 (BAEK SEUNGGYU) : @MCS M3MFA300_P02,04 T702149, T703349 Please check it. I don't think the job is going away. The palette has already been moved to the site. June 27, 2025 at 5:02 PM, Mohammad Amir : Sure Sir, Checking! June 27, 2025 at 5:16 PM, Mohammad Amir : This message was deleted. June 27, 2025 at 5:18 PM, Mohammad Amir : Sir, The reason why these jobs are not going away is because these jobs have destinations to STK011 but currently both carriers still exist in STK012 however currently these carriers have stored in STK012. The crane of STK012 is busy as it has several tasks. As soon as it will be free it will pick the carriers. From MCS RTD side everything is in order ✅. June 27, 2025 at 5:18 PM, Mohammad Amir : @FA Could you please check from SCS side and make sure everything is in order from SCS side as well. Carrier T702149-STK012(0101307) T703349-STK(0101208) Thank you very much! June 27, 2025 at 5:18 PM, FACS_JaewonShin : Stk 현재 진행상황 확인해보겠습니다 June 27, 2025 at 5:20 PM, N.Gábor F.A. : Both jobs have appeared in the scs, but are currently in Paused status, probably due to the amount of work the warehouse has received. June 27, 2025 at 5:22 PM, Mohammad Amir : Thank you very much for the confirmation from the SCS side. Yes from MCS and RTD side i witnessed the same phenomenon,as STK012 cranes htas several tasks that's why these carriers are not moving to STK011. As soon as cranes will be free ,it will pick the materials,I am monitoring. Thank you very much! June 27, 2025 at 5:23 PM, N.Gábor F.A. : Thank you for your cooperation. June 27, 2025 at 5:23 PM, Mohammad Amir : You are welcome! June 27, 2025 at 5:41 PM, Mohammad Amir : Dear @승규 (BAEK SEUNGGYU) Sir and @N.Gábor F.A. Update- As now crane of STK012 has been available so jobs for both carriers T702149 and T703349 has been completed successfully ,sothese jobs have been gone away successfully ✅. And these carriers have been stored in STK11. T703349-M0STK011(0101610) T702149-M0STK011(0202107). Thank you very much! June 27, 2025 at 5:42 PM, 승규 (BAEK SEUNGGYU) : Thank you for your help. June 27, 2025 at 5:42 PM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any further assistance. June 27, 2025 at 5:43 PM, N.Gábor F.A. : Thank you for the information June 27, 2025 at 5:44 PM, Mohammad Amir : You are welcome! June 27, 2025 at 6:10 PM, FACS_Wooseok Choi : @Mohammad Amir Please put it into cargo cell buffer 11 in agv15. June 27, 2025 at 6:11 PM, FACS_JaewonShin : Agv15 have full pallet June 27, 2025 at 6:12 PM, VK (mcs) : Checking June 27, 2025 at 6:14 PM, FACS_JaewonShin : Thanks June 27, 2025 at 6:15 PM, VK (mcs) : Transport job created June 27, 2025 at 6:15 PM, FACS_Wooseok Choi : Thank u June 27, 2025 at 8:23 PM, FA-CS-AGV-Masoud : @fa Please check M0STK014_P07 C/V light curtain detect June 27, 2025 at 8:24 PM, Döme György F.A : Checking June 27, 2025 at 10:21 PM, Ági : Sziasztok 2.emelet lift floor in position error June 27, 2025 at 10:21 PM, Döme György F.A : Nézem June 27, 2025 at 10:24 PM, Döme György F.A : Kész June 28, 2025 at 12:06 AM June 28, 2025 at 12:06 AM, András : 2F lift floor in position error June 28, 2025 at 12:10 AM, Döme György F.A : Nézem June 28, 2025 at 12:10 AM, András : rendben June 28, 2025 at 12:12 AM, Döme György F.A : Megyen June 28, 2025 at 12:12 AM, András : Köszi 😉 June 28, 2025 at 12:30 AM, Döme György F.A : @VK (mcs) Production has been completed on the M4MFA300 line. Could you please return the material that's on AGV09 back to the warehouse? June 28, 2025 at 12:33 AM, VK (mcs) : Please cancel job in ACS, then I will return it to STK. June 28, 2025 at 12:37 AM, Döme György F.A : Job cancel June 28, 2025 at 12:39 AM, VK (mcs) : Transport command created June 28, 2025 at 12:39 AM, Döme György F.A : Thank you very much! June 28, 2025 at 4:55 AM, Zoltán Harasztia FA : @mcs Hi, could you help me? There is a pallet S001875 that needs to be returned from the M0STK035 warehouse for inspection. Could you send it to us at M0CNV036 M02 June 28, 2025 at 4:56 AM, VK (mcs) : Checking June 28, 2025 at 5:05 AM, VK (mcs) : Transport job created June 28, 2025 at 5:06 AM, Zoltán Harasztia FA : Thank you very much! June 28, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor June 28, 2025 at 7:29 AM, Mohammad Amir : Good morning @Dávid F.A. Please check M4MFA300_P31 it is OOS and it is blocking one job. Thank you very much! June 28, 2025 at 7:37 AM, N.Gábor F.A. : Good morning. There is material on that port right now. June 28, 2025 at 7:37 AM, Mohammad Amir : Thank you very much for the confirmation! June 28, 2025 at 7:37 AM, N.Gábor F.A. : Your welcome June 28, 2025 at 8:09 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK033_P02 it is OOS and because of this several jobs are pending. Thank you very much! June 28, 2025 at 8:09 AM, N.Gábor F.A. : Checking June 28, 2025 at 8:45 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK035_C01 there is CRANE Unload timeout error and several jobs for CNV_036_M02 destination are pending. Thank you very much! June 28, 2025 at 8:46 AM, N.Gábor F.A. : Checking June 28, 2025 at 10:18 AM, N.Gábor F.A. : @MCS Hello Could you please return this pallet number to the warehouse? PS222-2506130085 It has been sitting at port M0CNV023_P11 for a long time, holding up the movement of other materials. June 28, 2025 at 10:18 AM, Mohammad Amir : Hello, Sure Checking! June 28, 2025 at 10:20 AM, N.Gábor F.A. : Thank you June 28, 2025 at 10:22 AM, Mohammad Amir : Issue has been resolved successfully ✅. Now Pallet has started to move and going to warehouse. I am monitoring for smooth delivery. Thank you very much! June 28, 2025 at 10:22 AM, N.Gábor F.A. : Thank you very much June 28, 2025 at 10:25 AM, Mohammad Amir : You are welcome! June 28, 2025 at 10:33 AM, Mohammad Amir : Update:- Pallet PS222-2506130085 has successfully deposited in the warehouse STK025(0102106)✅. Now materials flow has been normalised. Thank you very much! June 28, 2025 at 10:33 AM, N.Gábor F.A. : Thank you very much June 28, 2025 at 10:44 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK027_C01 there is CRANE FORK left collapse error ,some jobs are pending. Thank you very much! June 28, 2025 at 10:45 AM, N.Gábor F.A. : Checking June 28, 2025 at 10:52 AM, N.Gábor F.A. : Solved June 28, 2025 at 10:53 AM, Mohammad Amir : Köszönöm szepen 🙏 June 28, 2025 at 2:32 PM, Mohammad Amir : @Dávid F.A. Please check M0STK032_C01 there is CRANE Rack position not detect error. Thank you very much! June 28, 2025 at 2:39 PM, N.Gábor F.A. : Checking June 28, 2025 at 2:51 PM, N.Gábor F.A. : Solved June 28, 2025 at 2:52 PM, Mohammad Amir : Köszönöm szepen 🙏 June 28, 2025 at 3:40 PM, FA/CS/AGV_ Asjad : Hi @mcs, Could you please return the pallets on AGV#7 (ID: S001906) and AGV#6 (ID: S001923) to the source? The line will remain out of service as informed by the operators. Thank you! June 28, 2025 at 3:41 PM, Mohammad Amir : Good afternoon, Sure, working on it. June 28, 2025 at 3:46 PM, Mohammad Amir : Job has been cancelled for AGV#7(S001906) and command has been created to send this carrier back to warehouse successfully ✅. However for AGV#6(S001923) job cancellation is getting failed so please cancel from ACS side and afterwards I will send it to warehouse. Thank you very much! June 28, 2025 at 3:48 PM, FA/CS/AGV_ Asjad : Job for AGV#6 is cancelled now could you try again now? Thank you! June 28, 2025 at 3:48 PM, Mohammad Amir : Thank you very much for your assistance,sure. June 28, 2025 at 3:49 PM, Mohammad Amir : Now job has been created successfully to send this carrier back to warehouse as well. ✅ I am monitoring for smooth delivery. Thank you very much! June 28, 2025 at 3:50 PM, Duna Don : Thank you so much June 28, 2025 at 3:50 PM, Mohammad Amir : You are most welcome! June 28, 2025 at 6:05 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 28, 2025 at 6:57 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.28 2.Machine name : -Cell_buffer Brige 3. Action detail : -sensor check 4.Work time -Start : 18:57 -End : 5. Remark(specialote) : -X June 28, 2025 at 7:11 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.28 2.Machine name : -Cell_buffer Brige 3. Action detail : -sensor check 4.Work time -Start : 18:57 -End : 19:11 5. Remark(specialote) : -X June 29, 2025 at 2:06 AM June 29, 2025 at 2:06 AM, András : Sziasztok GF stop time over Floor in position error June 29, 2025 at 2:06 AM, Sarvajcz Ferenc FA : Ok June 29, 2025 at 2:09 AM, Zoltán Harasztia FA : Kész June 29, 2025 at 2:10 AM, András : Köszi June 29, 2025 at 6:03 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Zsurbej Zsolt Modul(2): Nagy Gábor, Martina Dávid Hun Operators (2): Gombos Csaba Nagypál Gábor June 29, 2025 at 6:40 AM, N.Gábor F.A. : @MCS Good Morning Could you delete this job? It's alternated, but this palette phisicly don't here UNK-2506281735570 the carrier Name June 29, 2025 at 6:44 AM, duzzaman Md (MCS) : Done , Thank you June 29, 2025 at 6:45 AM, N.Gábor F.A. : Thank you June 29, 2025 at 7:43 AM, Nemes Patrik : GF lift error June 29, 2025 at 7:48 AM, N.Gábor F.A. : Legközelebb ha beirsz valamit legalább kicsit pontosabban, hogy melyik meg, hogy mit szeretnél..... June 29, 2025 at 7:55 AM, duzzaman Md (MCS) : @FA please check the stop detect error on M0CNV023_34_031 Thank you June 29, 2025 at 7:56 AM, Nemes Patrik : Okey sorry June 29, 2025 at 9:40 AM, duzzaman Md (MCS) : @FA Please check M0STK022_C01 there is Crane shelf in abort (double cargo). Thank you June 29, 2025 at 9:50 AM, N.Gábor F.A. : Solved June 29, 2025 at 11:48 AM, Dávid F.A. : @duzzaman Md (MCS) Have a nice day! I would like to ask for help! In transport ID:.PS230-2506190063 old transport please delete I am looking for a new job! Currently located at M0CNV023_P31 I have physically checked it! June 29, 2025 at 11:52 AM, duzzaman Md (MCS) : Task has been cancelled June 29, 2025 at 11:56 AM, Dávid F.A. : Shipping is starting again! I would like to request shipping from M0CNV023_P31 to M3MF300_P28! June 29, 2025 at 12:02 PM, duzzaman Md (MCS) : Command created June 29, 2025 at 12:02 PM, Dávid F.A. : Thank you very much! Problem solved! It helped a lot! June 29, 2025 at 3:31 PM, duzzaman Md (MCS) : @FA Please check M0STK013 C/V Inverter fault Thank you June 29, 2025 at 3:32 PM, N.Gábor F.A. : Sure June 29, 2025 at 3:54 PM, N.Gábor F.A. : Solved! June 29, 2025 at 5:19 PM, FA/CS/AGV_ Asjad : @FA Please check M0STK013 - C/V Inverter Fault Thank You! June 29, 2025 at 6:00 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 29, 2025 at 6:56 PM, Zoltán Harasztia FA : @ mcs Hi, could you help me? The pallet W000111 needs to be sent back to the warehouse from M0CNV023 P43. This material was picked a while ago, but it has just been brought out, and this line is no longer in operation. June 29, 2025 at 6:57 PM, Shakir (MCS) : Checking June 29, 2025 at 7:00 PM, Shakir (MCS) : Job has been initiated AGV02 assigned and on the way Thank you June 29, 2025 at 7:01 PM, Zoltán Harasztia FA : Thank you very much! June 29, 2025 at 7:27 PM, Shakir (MCS) : @FA Please check M0STK011_P12 and M0STK013_P05 error. Thank you June 29, 2025 at 7:29 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.29 2.Machine name : -Cell_buffer 13 3. Action detail : - light curtein PLC check 4.Work time -Start : 19:29 -End : 5. Remark(specialote) : -30분 소요예상 June 29, 2025 at 7:38 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.29 2.Machine name : -Cell_buffer 13 3. Action detail : - light curtein PLC check 4.Work time -Start : 19:29 -End : 19:38 5. Remark(specialote) : -조치완료 June 29, 2025 at 9:53 PM, Döme György F.A : @Shakir (MCS) Could you please help? The production on the M1MFA300 line has been completed. At the request of Production, could you delete the order so that the material is not taken from the P05 port? June 29, 2025 at 9:55 PM, Shakir (MCS) : Job has been cancelled, Thanks June 29, 2025 at 9:55 PM, Döme György F.A : Thank you very much! June 30, 2025 at 1:55 AM June 30, 2025 at 1:55 AM, Döme György F.A : @Shakir (MCS) Could you please help? The production has finished on line M4MFA300. Could you send back the material that is on AGV09 (U031407)? June 30, 2025 at 1:56 AM, Shakir (MCS) : Working on it June 30, 2025 at 2:01 AM, Shakir (MCS) : Could you cancelled job from ACS @ACS June 30, 2025 at 2:03 AM, Shakir (MCS) : Done ✅ June 30, 2025 at 2:03 AM, Döme György F.A : I have deleted the ACS command. The AGV is on its way. Thank you very much! June 30, 2025 at 2:03 AM, Shakir (MCS) : You’re welcome June 30, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.30. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(0): Sick(0): Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dánie --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Csanálosi Gábor NC OP(2): Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ------- June 30, 2025 at 6:12 AM, Sarvajcz Ferenc FA left this chatroom. June 30, 2025 at 7:09 AM, Mohammad Amir : Good morning @Denkó Jani (F.A.) Please check M0CNV031 it is OOS. Several jobs are pending. Thank you very much! June 30, 2025 at 7:10 AM, Denkó Jani (F.A.) : Checking June 30, 2025 at 7:16 AM, Denkó Jani (F.A.) : Solved June 30, 2025 at 7:16 AM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 9:09 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0CNV023_34_035 there is wrapper sealing not detected error. Thank you very much! June 30, 2025 at 9:11 AM, Denkó Jani (F.A.) : Checking June 30, 2025 at 9:20 AM, Mohammad Amir : @Denkó Jani (F.A.) Please also check M0STK035_C01 there is CRANE STK action 5 min time over error. Thank you! June 30, 2025 at 9:21 AM, Denkó Jani (F.A.) : it was just a foil replacement June 30, 2025 at 9:21 AM, Denkó Jani (F.A.) : Going June 30, 2025 at 9:24 AM, Mohammad Amir : @FA @Boromisza Zoltán Please check M0STK025_C01 there crane fork left wide #2 check error. Thank you very much! June 30, 2025 at 9:25 AM, Boromisza Zoltán : Okey June 30, 2025 at 9:25 AM, Denkó Jani (F.A.) : Solved June 30, 2025 at 9:29 AM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 9:36 AM, Boromisza Zoltán : Solved June 30, 2025 at 9:37 AM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 10:08 AM, Mohammad Amir : @Denkó Jani (F.A.) Please also check M0STK035_C01 there is CRANE STK action 5 min time over error. Thank you! June 30, 2025 at 10:15 AM, Denkó Jani (F.A.) : Going June 30, 2025 at 10:23 AM, Mohammad Amir : @Boromisza Zoltán Please check M0STK034_C01 there is CRANE Hoist down over run detect error. Thank you very much! June 30, 2025 at 10:24 AM, Denkó Jani (F.A.) : Korean colleagues are working on stk35,stk 34 June 30, 2025 at 10:24 AM, Mohammad Amir : Thank you very much for the confirmation! June 30, 2025 at 11:53 AM, Ákos (Modul 2.E.) : Sziasztok a második emeletre karbantartott kérek szépen az anyag elakadt köszönöm June 30, 2025 at 11:54 AM, Boromisza Zoltán : Megyünk June 30, 2025 at 11:59 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK022_C01 there is Double cargo error several jobs are getting delayed. Thank you very much! June 30, 2025 at 12:06 PM, Denkó Jani (F.A.) : Going June 30, 2025 at 12:06 PM, Boromisza Zoltán : Kész June 30, 2025 at 1:55 PM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check M0STK024_C01 there is CRANE FORK left collapse detect 1 error. Thank you very much! June 30, 2025 at 2:06 PM, Mohammad Amir : @Boromisza Zoltán Please check STK035_C01 there is CRANE STK action 5 min time over error . And please check is maintainance for STK034 has been completed or not ? Jobs are pending for more than 4 hours. Thank you very much! June 30, 2025 at 2:13 PM, Denkó Jani (F.A.) : Még csinálják a 34 est a 35 megy June 30, 2025 at 2:13 PM, Denkó Jani (F.A.) : Ez is kész June 30, 2025 at 2:13 PM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 2:57 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check STK037_C01 there is light curtain-01 error. Thank you very much! June 30, 2025 at 3:05 PM, Mohammad Amir : This message was deleted. June 30, 2025 at 3:05 PM, Mohammad Amir : @Boromisza Zoltán Please check CNV031_RTV01 there is interface error and several jobs are pending. Thank you very much! June 30, 2025 at 3:08 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán @Gerbovits Kevin Line 3-4 között az AGVk nem dolgoznak. Check pls June 30, 2025 at 3:09 PM, FA/CS/AGV_ Asjad : Coming June 30, 2025 at 3:11 PM, Mohammad Amir : For your information:- Due to downtime in CNV031 you may witness a delay in dunnage supply to line -4. I already informed the FA team member regarding the issue. Thank you very much! June 30, 2025 at 3:18 PM, Mohammad Amir : @FA @Gerbovits Kevin Please check this issue, it still exists and it is blocking dunnage delivery to line -4. Thank you very much! June 30, 2025 at 3:19 PM, Denkó Jani (F.A.) : Solved June 30, 2025 at 3:20 PM, Mohammad Amir : Thank you very much! June 30, 2025 at 3:23 PM, Mohammad Amir : Dear @All Update :- Dunnage supply and recovery has been normalized for line 3&4✅. Thank you very much! June 30, 2025 at 3:25 PM, 승규 (BAEK SEUNGGYU) : @FA Please check the 8-line and plate gentry. Gripper problem June 30, 2025 at 3:27 PM, Boromisza Zoltán : Solved June 30, 2025 at 3:53 PM, 이민호 MINHO : @FA team I can see some sensors not being securely fixed and aligned. Please check the sensors, related with Overhang error #1~#5 in the Input port M0CNV021_M01 M0CNV021_M02 M0CNV022_M01 M0CNV022_M02 June 30, 2025 at 4:00 PM, 승규 (BAEK SEUNGGYU) : I need help with line 8. June 30, 2025 at 4:06 PM, Denkó Jani (F.A.) : Megyünk June 30, 2025 at 4:26 PM, Horváth Adriàn : Line 3-4 között Két AGV nagyon közeli kapcsolatba került egymàssal. Check pls June 30, 2025 at 4:35 PM, FA/CS/AGV_ Asjad : Solved June 30, 2025 at 4:39 PM, SKOH2/제조-셀,모듈 출하/김병호 : MCS/RTD team M0CNV033_M02 U031788 There is no destination information. M0STK037,38 Please put it in one of the two places. June 30, 2025 at 4:41 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team M0CNV033_M02 U031788 도착지 정보가 생성되지 않아 37,38번 뱅크로 수동입고 부탁드립니다. June 30, 2025 at 4:42 PM, Mohammad Amir : Checking,Sir. June 30, 2025 at 4:47 PM, 승규 (BAEK SEUNGGYU) : @FA 금일 4시 50분 부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 부탁드립니다 June 30, 2025 at 4:48 PM, FA/CS/AGV_ Asjad : Sure June 30, 2025 at 4:48 PM, Mohammad Amir : @MES Please check U031788 located at CNV033_M02 ,Rackin is getting failed for this carrier from MES side we are receiving WRHSLOCCD of the material doesn't match error from MES . Please check. Thank you very much! June 30, 2025 at 4:49 PM, Mohammad Amir : @SKOH2/제조-셀,모듈 출하/김병호 Sir, Due to this error from MES side destination is not getting created ,I have informed the MES side regarding the error. I am monitoring. Thank you very much! June 30, 2025 at 4:58 PM, SKOH2/제조-셀,모듈 출하/김병호 : This is empty dunnage. Please put it in 37,38 bank. June 30, 2025 at 4:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : The destination information is not generated, so please stock it manually. June 30, 2025 at 5:01 PM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you, moving June 30, 2025 at 5:02 PM, Mohammad Amir : This message was deleted. June 30, 2025 at 5:02 PM, Mohammad Amir : Sir, According to your request I have sent this empty dunnage manually to STK37_Z01 to store ✅. I am monitoring for smooth transfer. Thank you very much! June 30, 2025 at 5:16 PM, Mohammad Amir : Update:- Sir, Empty carrier U031788 has been successfully stored in warehouse M0STK037(0101603) at 17:15 ✅. Feel free to contact me again if you need further assistance. Thank you very much! June 30, 2025 at 6:31 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 30, 2025 at 7:30 PM, FA CS AGV Jawad : Hi @Csepi Árpád can you plz check STK 11 crane..? June 30, 2025 at 7:46 PM, FACS_Hyeongi Son : Solved June 30, 2025 at 7:52 PM, FA CS AGV Jawad : Thanks June 30, 2025 at 9:38 PM, Shakir (MCS) : @FA Please check M0CNV032_P01 there is Stop detect error. Thank you June 30, 2025 at 9:42 PM, FACS_Hyeongi Son : Solved June 30, 2025 at 11:44 PM, Magosi Erik : @Csepi Árpád ki tudnál jönni a 3as sorhoz légyszi? July 1, 2025 at 12:04 AM July 1, 2025 at 12:04 AM, Csepi Árpád : @mcs Hi! There is a stuck task. M3MFA300_P29 ID: PS230-2506120012 I would like to request the deletion of this task. July 1, 2025 at 12:05 AM, Shakir (MCS) : Job cancelled successfully ✅ Thanks July 1, 2025 at 12:05 AM, Csepi Árpád : Thank you very much! 🙂 July 1, 2025 at 12:35 AM, FA CS AGV Jawad : @Shakir (MCS) carrier PS230-2506120012 does not exist in the port M3MFA300-P29, and but AGVs gets unload job there July 1, 2025 at 12:36 AM, Shakir (MCS) : Now? July 1, 2025 at 12:37 AM, Shakir (MCS) : Now, issue resolved July 1, 2025 at 12:37 AM, FA CS AGV Jawad : Yes, AGV02, i deleted it, July 1, 2025 at 12:38 AM, FA CS AGV Jawad : Thanks bhae July 1, 2025 at 3:54 AM, Magosi Erik : @Csepi Árpád van egy kis torlódás a magasraktár irányába. Kérlek csekkolj rá. Köszi July 1, 2025 at 4:07 AM, FA CS AGV Jawad : Solved July 1, 2025 at 4:09 AM, Magosi Erik : Thank You Sir July 1, 2025 at 6:03 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán @Gerbovits Kevin van egy kis problem a line 3 BMA portnàl. Vàrok maajd vkit. 😁 Köszi. July 1, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.01. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): --------------- Electrode(3): Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ----------- July 1, 2025 at 7:09 AM, Boromisza Zoltán : Kész July 1, 2025 at 7:11 AM, Horváth Adriàn : Tuti?😂😁 July 1, 2025 at 7:17 AM, Denkó Jani (F.A.) : A portról eltűnt,te azt írtad hibának 😉 July 1, 2025 at 7:39 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán akkor most jelzem h a raktàrnàl megakadt BMA akadàlyozza a többi àrú visszaküldését.😁 July 1, 2025 at 9:29 AM, Roland : Sziasztok. M0STK021 conveyor beragadt. Megtudjatok csinalni nekunk, kerlek? Koszonom! 🙏🏻 July 1, 2025 at 9:40 AM, Boromisza Zoltán : Megyek July 1, 2025 at 9:46 AM, Boromisza Zoltán : Kész July 1, 2025 at 1:56 PM, Roland : M0STK021 - Double cargo error. Megtudjatok nezni, kerlek? Koszonom July 1, 2025 at 1:56 PM, Denkó Jani (F.A.) : Megyünk July 1, 2025 at 3:00 PM, duzzaman Md (MCS) : @FA M0STKA022_C01 is OutOfService, having Crane W/T In Abort error. Please check Thank you! July 1, 2025 at 3:12 PM, FACS_오창훈_CHANGHOON : Solved July 1, 2025 at 5:31 PM, 승규 (BAEK SEUNGGYU) : @FA 금일 5시 30분 부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 부탁드립니다 July 1, 2025 at 6:05 PM, 승규 (BAEK SEUNGGYU) : @FA Please check AGV9 for the finished product discharge section. silent stop July 1, 2025 at 6:06 PM, FA CS AGV Jawad : On my way July 1, 2025 at 6:12 PM, FA CS AGV Jawad : All ok now July 1, 2025 at 6:15 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 1, 2025 at 6:22 PM, Sánta László : Hi Everyone! I know that the AGV traffic was stopped due to forklift movement, but because of this, production on line 1 has now stopped on my side due to a lack of dunnage. How long will it take for the empty dunnage to arrive? Also, could I kindly ask you to please keep this in mind in the future? Thank you so much! July 1, 2025 at 6:24 PM, Magosi Erik : @Csepi Árpád magasraktár üres dunnage kitöltésnél error van. Kérlek csekkolj rá légyszives. Keresztbe áll az outconveyoron meg az agvn a dunnage July 1, 2025 at 6:24 PM, Magosi Erik : Köszi July 1, 2025 at 6:43 PM, Csepi Árpád : Kész July 1, 2025 at 6:46 PM, Magosi Erik : Köszi Árpi July 1, 2025 at 6:47 PM, Csepi Árpád : Szivi July 1, 2025 at 7:19 PM, SKOH2/제조-셀,모듈 출하/김병호 : 북측 모듈 도크장 GF M0CNV033_LF01 알람 발생하여 확인 부탁드립니다. July 1, 2025 at 7:19 PM, SKOH2/제조-셀,모듈 출하/김병호 : North module dock GF M0CNV033_LF01 Please check the alarm. July 1, 2025 at 7:26 PM, Csepi Árpád : Solved July 1, 2025 at 7:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : It hasn't been fixed yet July 1, 2025 at 7:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : It's stopped the same July 1, 2025 at 7:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 북측 모듈 도크장 GF M0CNV033_LF01 리프트 알람이 동일하게 계속 발생합니다. 지금 세번째인데 확인 바랍니다 July 1, 2025 at 7:34 PM, Csepi Árpád : “I’ll check it again now!” July 1, 2025 at 7:35 PM, FACS_Hyeongi Son : 넵 이동하겠습니다 July 1, 2025 at 8:38 PM, FA CS AGV Jawad : @Csepi Árpád can you plz check STK11 July 1, 2025 at 8:38 PM, 승규 (BAEK SEUNGGYU) : @FA It is stopped due to AGV movement interference in the finished product section. Please check. July 1, 2025 at 8:38 PM, FA CS AGV Jawad : I check it. July 1, 2025 at 8:43 PM, FA CS AGV Jawad : Solved July 1, 2025 at 8:51 PM, FA CS AGV Jawad : Again same error data timeout @Csepi Árpád July 1, 2025 at 9:18 PM, Édl Tamás : M0STK012 21:20-tól tervszerű karbantartás-ellenőrzés miatt, előre láthatólag 20 percen át állni fog. July 1, 2025 at 9:42 PM, Maczó Anikó : Sziasztok 2f 3 gép cv036 slow detect hiba July 1, 2025 at 9:43 PM, Csepi Árpád : Megyek July 1, 2025 at 9:53 PM, Csepi Árpád : Kész July 1, 2025 at 10:08 PM, VK (mcs) : @FA Please check M0STK026 MCP 2F OP2 light curtain detect error. July 1, 2025 at 10:49 PM, Csepi Árpád : Solved July 2, 2025 at 5:01 AM July 2, 2025 at 5:01 AM, FA CS AGV Jawad : @VK (mcs) can you plz send these pallets back to source 1. U0300P9 2. U029988 July 2, 2025 at 5:09 AM, VK (mcs) : Transport job created July 2, 2025 at 5:09 AM, FA CS AGV Jawad : Thanks July 2, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 2, 2025 at 6:40 AM, 이민영(Minyoung Lee) : • Line 1 • Brief description: AGVs do not transport empty dunnage. • TOTAL downtime: 06:10-ongoing please check July 2, 2025 at 6:46 AM, FA/CS/AGV/Taimur : AGV: 14 is on the way taking carrier: U031641 July 2, 2025 at 6:46 AM, 윤성제(Yoon SungJe) : @MCS Hello M4MFA300_P01,T704310 came in yesterday at 17:18 and is not here now. And there is no carrier for M4MFA300_P29,sAI 47 1. If there is no problem with the two JOBs, can you delete them? July 2, 2025 at 6:47 AM, 윤성제(Yoon SungJe) : Pm님 1라인 공 더니지 투입되었고 라인 가동중입니다 July 2, 2025 at 6:50 AM, Shakir (MCS) : There is no job exists, Thanks July 2, 2025 at 6:51 AM, 윤성제(Yoon SungJe) : Now, the JOB has been created in RTD and has not been erased since yesterday. July 2, 2025 at 6:54 AM, Shakir (MCS) : Now Job cancelled from RTD Thanks July 2, 2025 at 7:00 AM, 윤성제(Yoon SungJe) : Also, M3MFA300_P04,T701193 is not here either. And M1MFA300_P02,P04 T704311,T704315 is also not here. If there is no problem, please delete the job. July 2, 2025 at 7:01 AM, 윤성제(Yoon SungJe) : All materials for the carrier have been used. July 2, 2025 at 7:02 AM, Shakir (MCS) : Working on it July 2, 2025 at 7:06 AM, Shakir (MCS) : All the mentioned carrier job has been cancelled ✅ Thank you July 2, 2025 at 7:08 AM, 윤성제(Yoon SungJe) : Thank you very much. But the job for M4MFA300_P29 hasn't disappeared yet. July 2, 2025 at 7:09 AM, 윤성제(Yoon SungJe) : This carrier ID is strange... July 2, 2025 at 7:09 AM, Shakir (MCS) : Checking July 2, 2025 at 7:12 AM, Shakir (MCS) : I didn’t find any job on _P29, could you please provide me carrier Id. July 2, 2025 at 7:14 AM, 윤성제(Yoon SungJe) : @FA The RTV CAR RETURN error occurred in the north warehouse. Please check. EMPTY DUNNAGE emission is delayed. July 2, 2025 at 7:16 AM, 윤성제(Yoon SungJe) : sAI 47 1 July 2, 2025 at 7:18 AM, 윤성제(Yoon SungJe) : @FACS 안녕하세요 지금 완제품 더니지팔레트 배출지연으로 공 더니지 입고 지연되고 있습니다 AGV 풀 대기상태입니다 확인 부탁드립니다 July 2, 2025 at 7:23 AM, Shakir (MCS) : There is no job in MCS/RTD with this carrier id. July 2, 2025 at 7:26 AM, 윤성제(Yoon SungJe) : @MCS Can you create a JOB for U029815? It is now at M0CNV031_P01. July 2, 2025 at 7:26 AM, Shakir (MCS) : Checking July 2, 2025 at 7:27 AM, 윤성제(Yoon SungJe) : This should go into the warehouse. July 2, 2025 at 7:27 AM, Shakir (MCS) : On it July 2, 2025 at 7:33 AM, Shakir (MCS) : Done and Stocked at M0STK032(0102302) ✅ Thank you July 2, 2025 at 7:34 AM, 윤성제(Yoon SungJe) : Thank you very much. I am monitoring. July 2, 2025 at 7:35 AM, Shakir (MCS) : You’re welcome July 2, 2025 at 9:26 AM, 윤성제(Yoon SungJe) : @FA Hello, please check the module 3 line unloading unit AGV10. TIME OVER ERROR is occurring. July 2, 2025 at 9:28 AM, N.Gábor F.A. : Can't unload it beacouse the palette it's not full July 2, 2025 at 9:31 AM, FA/CS/AGV/Taimur : @Shakir (MCS) please delete the job for port: M3MFA300_P05 is dunnage is not ready for unload. The UR is false. Thanks July 2, 2025 at 9:31 AM, Shakir (MCS) : On it July 2, 2025 at 9:32 AM, Roland : Hello. M0CNV022_M01 port sensors are not set correctly, always drop an Overhang error. Can you adjust it, please? Thank you July 2, 2025 at 9:36 AM, Shakir (MCS) : Job cancelled successfully ✅ July 2, 2025 at 9:48 AM, 윤성제(Yoon SungJe) : This message was deleted. July 2, 2025 at 9:48 AM, Shakir (MCS) : This message was deleted. July 2, 2025 at 10:27 AM, N.Gábor F.A. : @Mcs Hello There is a palette data on the M1MFA300_P23 port, but the palette itself is not physically here, so no new material is arriving in its place. Could you take a look at this for me? July 2, 2025 at 10:32 AM, N.Gábor F.A. : @Shakir (MCS) July 2, 2025 at 10:40 AM, 윤성제(Yoon SungJe) : @이민호 MINHO 안녕하세요 pm님 지금 창고에 DS TAPE이 없는것 같은데 언제 입고되는지 알 수 있을까요? July 2, 2025 at 10:47 AM, Shakir (MCS) : Data Updated ✅ currently port in manual mode/OOS. Thank you July 2, 2025 at 11:21 AM, 이민호 MINHO : 안녕하세요. 항공 통해 입고 예정으로 전달받았는데 입고 일정 확인해 보고 공유드리겠습니다 July 2, 2025 at 11:21 AM, 윤성제(Yoon SungJe) : 감사합니다 July 2, 2025 at 12:31 PM, 이민영(Minyoung Lee) : 빈 더니지 안오는 경우가 많은데 문제가 뭐에요? July 2, 2025 at 12:44 PM, 윤성제(Yoon SungJe) : 제가 도착했을 땐 북측창고 RTV IDLE상태로 움직이지않다가 3분뒤에 재가동 시작했었습니다 error는 따로 없었습니다 July 2, 2025 at 12:49 PM, Shakir (MCS) : @FA Please check M0STK032_P12 and M0STK033_P14 is out of service. Thank you July 2, 2025 at 12:53 PM, N.Gábor F.A. : Just a minute July 2, 2025 at 2:16 PM, FA/CS/AGV/Taimur : @N.Gábor F.A. Can you please check STK11 crane. It is under alarm. Thanks July 2, 2025 at 2:16 PM, N.Gábor F.A. : Sure July 2, 2025 at 2:16 PM, FA/CS/AGV/Taimur : Solved. No need. Thank you July 2, 2025 at 2:17 PM, N.Gábor F.A. : Ooookay :D July 2, 2025 at 2:53 PM, Sazzad Bhai SKon : @Fa cell packing F0BPM011_P02 is oos. Delivery getting delayed July 2, 2025 at 4:41 PM, Sazzad Bhai SKon invited MCS/RTD System. July 2, 2025 at 5:03 PM, 승규 (BAEK SEUNGGYU) : @FA 금일 5시부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 부탁드립니다 July 2, 2025 at 5:32 PM, N.Gábor F.A. : @MCS Hello Could you locate to me this palette? S002040 July 2, 2025 at 5:33 PM, Shakir (MCS) : Checking July 2, 2025 at 5:33 PM, N.Gábor F.A. : Thank you July 2, 2025 at 5:36 PM, Shakir (MCS) : The Last location for this carrier was M0STK011_P13_BP01 after that carrier removed. Thank you July 2, 2025 at 5:38 PM, N.Gábor F.A. : The carrier has not been removed from the port, it is currently still on port M0STK011_P13_OP01. July 2, 2025 at 5:40 PM, Shakir (MCS) : According to MCS it showing carrier removed July 2, 2025 at 5:45 PM, Shakir (MCS) : Please confirm that we will update the location. Thanks July 2, 2025 at 6:13 PM, Sazzad Bhai SKon : @FA @manufacturing @CIM Please don't hesitate to call this number @FA System Technician in case there is urgent request related to MCS RTD. Any day anytime (24/7) Thank you. July 2, 2025 at 6:14 PM, Sazzad Bhai SKon : @MCS/RTD System July 2, 2025 at 6:39 PM, FA CS AGV Jawad : @FA can you plz check STK11, alarm . July 2, 2025 at 6:39 PM, Döme György F.A : Checking July 2, 2025 at 6:50 PM, SKOH2/제조-셀,모듈 출하/김병호 : RTD/MCS M0CNV033_M02 U926517 목적지 생성이 안되고 있습니다. mostk031,032,033,037,038 중에 한곳으로 수동으로 넣어 주세요 July 2, 2025 at 6:50 PM, SKOH2/제조-셀,모듈 출하/김병호 : RTD/MCS M0CNV033_M02 U926517 The destination is not being created. Mostk031,032,033,037,038 Please put it in one of the places manually. July 2, 2025 at 6:50 PM, Mohammad Amir : Good Evening Sir, Checking! July 2, 2025 at 6:55 PM, Mohammad Amir : Sir, Please confirm the carrier id has reported as UNKDUP-U026517-38870 at CNV033_M02 not U926517. Should I send this one to STK? Thank you very much! July 2, 2025 at 6:56 PM, SKOH2/제조-셀,모듈 출하/김병호 : yes July 2, 2025 at 6:56 PM, SKOH2/제조-셀,모듈 출하/김병호 : full plt July 2, 2025 at 6:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : sorry July 2, 2025 at 6:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : U026517 July 2, 2025 at 7:00 PM, SKOH2/제조-셀,모듈 출하/김병호 : carrier id : U026517 July 2, 2025 at 7:01 PM, Mohammad Amir : This message was deleted. July 2, 2025 at 7:01 PM, Mohammad Amir : @FA Please check UNKDUP-U02617-38870 located at M0CNV033_M02 ,while I am creating command from MCS,CCS side is not executing this command. Please make sure that all data is filled and not missing from CCS side. Thank you very much! July 2, 2025 at 7:03 PM, 배병민 (Bae Byoungmin) : UNKDUP is a ID duplicate creation error. It's not our problem. July 2, 2025 at 7:03 PM, SKOH2/제조-셀,모듈 출하/김병호 : Commands are not created in CCS. U026517 July 2, 2025 at 7:04 PM, SKOH2/제조-셀,모듈 출하/김병호 : 배병민 PM님 해당 제품은 방금 재고실사 하려고 완제품 창고에서 빼고 실물 확인후 재입고 진행중에 생긴 현상입니다 July 2, 2025 at 7:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : 중복이 될수가 없는데요 July 2, 2025 at 7:05 PM, Mohammad Amir : Good evening Sir, While creating command from MCS, CCS side is not executing the command and send HACK-2 reply that' why command it not executing and carrier is not moving. Thank you very much! July 2, 2025 at 7:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : 어떻게 해야 하나요? July 2, 2025 at 7:07 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) PM님 해당 제품은 완제품 창고 재고실사 때문에 실물 확인을 위해 배출 후 다시 재입고 상태에서 발생한 현상인데 어떻게 진행하면 되는건지요?? July 2, 2025 at 7:07 PM, SKOH2/제조-셀,모듈 출하/김병호 : 중복제품은 아닙니다. July 2, 2025 at 7:15 PM, Mohammad Amir : Sir, Could you please try Rackin this product again. Thank you very much! July 2, 2025 at 7:18 PM, SKOH2/제조-셀,모듈 출하/김병호 : We are trying to take out this product again manually. Please delete the RTD command. UNKDUP-U026517-3887 July 2, 2025 at 7:20 PM, Mohammad Amir : Sure Sir,there is no RTD/MCS command exists . Thank you very much! July 2, 2025 at 7:24 PM, SKOH2/제조-셀,모듈 출하/김병호 : Manual/Reservation Request carrier id : U026517 If you search, you will get an inquiry. July 2, 2025 at 7:31 PM, Mohammad Amir : Sir, I checked here is the short summary of the issue. Carrier U026517 was first reach from STK033 to MCNV033_M04 at 18:43. Afterwards at 18:44 when id read happened from MCNV033_M02 ,it reported U026517 as UNKDUP-U026517-38870. And that's why current location of actual carrier U026517 became NA. So Sir, that's why command is not executing from CCS side . Could you please try Rackin from M02 (id read should be success afterwards issue will be resolved and job should be created.) Thanks! July 2, 2025 at 7:41 PM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK035_C01 there is CRANE fork collapse detect 4 error and it has blocked several jobs. Thank you very much! July 2, 2025 at 7:45 PM, SKOH2/제조-셀,모듈 출하/김병호 : I'll finish the rest of the work and try again. Thanks July 2, 2025 at 7:46 PM, Mohammad Amir : Sure Sir, Feel free to ask me if you need any further assistance. Thank you very much. July 2, 2025 at 7:57 PM, FA CS AGV Jawad : @FA plz check STK11...data error July 2, 2025 at 8:15 PM, FA CS AGV Jawad : Plz check once more. July 2, 2025 at 8:42 PM, Farkas Misi : Sziasztok M0CNV033 raktárban a lift meg állt. Legyetek szívesek meg nézni. Köszönöm. July 2, 2025 at 8:42 PM, Zoltán Harasztia FA : Nézzük July 2, 2025 at 8:47 PM, Zoltán Harasztia FA : Kész July 2, 2025 at 8:47 PM, Farkas Misi : Köszönöm July 2, 2025 at 8:54 PM, FA CS AGV Jawad : @FA, plz check STK 11...data alarm July 2, 2025 at 8:54 PM, Zoltán Harasztia FA : Cheking July 2, 2025 at 9:00 PM, Zoltán Harasztia FA : Solved July 2, 2025 at 9:04 PM, FA CS AGV Jawad : Can you plz check again July 2, 2025 at 9:05 PM, FA CS AGV Jawad : As I can see Crane has stuck halfway in STK 13 too. July 2, 2025 at 9:13 PM, Farkas Misi : Sziasztok M0CNV033 raktárban a lift megint meg állt. Legyetek szívesek meg nézni. Köszönöm. July 2, 2025 at 9:14 PM, Döme György F.A : Megyek July 2, 2025 at 11:05 PM, FA CS AGV Jawad : @FA data error at STK, plz check July 2, 2025 at 11:08 PM, FACS_TaehyeongJin : Solved July 3, 2025 at 12:00 AM July 3, 2025 at 12:00 AM, FA CS AGV Jawad : @FA, can you plz check STK 11, data issue July 3, 2025 at 5:58 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(4) Oláh András , Kiss Balázs, Szabadi Miklós, Novák Károly Assembly(4): GF: Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 3, 2025 at 6:11 AM, FA/CS/AGV_ Asjad : Good Morning @FA Please check M0STK011 - CRC2 Carrier_Data_Receive_Timeout error Thank you July 3, 2025 at 6:53 AM, FA/CS/AGV_ Asjad : @FA It is still on error causing job delays, please check it. Thank You! July 3, 2025 at 6:54 AM, N.Gábor F.A. : Checking July 3, 2025 at 7:12 AM, N.Gábor F.A. : @MCS Good Morning Can you locate to me this palette? Z102654 July 3, 2025 at 7:14 AM, MCS/RTD System : The last location was M0STK011_P13 at 7:04 July 3, 2025 at 7:16 AM, N.Gábor F.A. : Could you update its position? The material is currently physically located at M0STK011_P13_OP01. July 3, 2025 at 7:17 AM, MCS/RTD System : Updated. Thank you July 3, 2025 at 7:18 AM, N.Gábor F.A. : Thank you July 3, 2025 at 7:21 AM, FA/CS/AGV_ Asjad : @N.Gábor F.A. Could you please check M0CNV032. Thank you! July 3, 2025 at 7:24 AM, N.Gábor F.A. : Checking July 3, 2025 at 7:31 AM, MCS/RTD System : Please check 'Carrier data receive timeout' at the same port M0STK11_P13_O01 July 3, 2025 at 7:31 AM, N.Gábor F.A. : I'm working on it July 3, 2025 at 7:47 AM, 윤성제(Yoon SungJe) : @MCS Hello, can you check if M4MFA300_P03,T705142 went to M0STK011? And if that carrier went to M0STK011, can you delete JOB? July 3, 2025 at 7:48 AM, MCS/RTD System : It was going to M0STK011. CANCELLED THE JOB. July 3, 2025 at 7:49 AM, 윤성제(Yoon SungJe) : @FA Hello, can you check the M4MFA300_P30,PS222-2506130077? JOB has been created and the status is QUEUED. July 3, 2025 at 7:50 AM, 윤성제(Yoon SungJe) : Are you saying that the carrier was canceled while on the way? July 3, 2025 at 7:52 AM, N.Gábor F.A. : @MCS/RTD System Could you please delete the palette data from this position? Z102654 M0STK011_P13_OP01 July 3, 2025 at 7:53 AM, MCS/RTD System : The carrier was removed from VC04 at 00:12 and it became NA July 3, 2025 at 7:54 AM, MCS/RTD System : Done July 3, 2025 at 7:54 AM, N.Gábor F.A. : Thank you July 3, 2025 at 8:11 AM, 윤성제(Yoon SungJe) : @MCS This carrier hasn't been coming for an hour now. Can you check it out? July 3, 2025 at 8:14 AM, MCS/RTD System : The destination port M4MFA300_P30 is out of service. July 3, 2025 at 8:14 AM, MCS/RTD System : @FA PLEASE CHECK July 3, 2025 at 8:20 AM, N.Gábor F.A. : The port is auto mode July 3, 2025 at 8:22 AM, MCS/RTD System : Carrier is moving now. July 3, 2025 at 8:52 AM, FA/CS/AGV_ Asjad : @mcs Can you send Pallet (ID: T702015) on AGV# 6 to EOL#1 or 3 Thank you! July 3, 2025 at 8:56 AM, FACS_JaewonShin : And could you check why eol input port job is not made? July 3, 2025 at 8:57 AM, MCS/RTD System : Job created. Thank you July 3, 2025 at 9:01 AM, FA/CS/AGV_ Asjad : This message was deleted. July 3, 2025 at 9:02 AM, FA/CS/AGV_ Asjad : It still doesn’t have any Unloading job according to ACS, can you check again? Thank you! July 3, 2025 at 9:02 AM, MCS/RTD System : Checking July 3, 2025 at 9:14 AM, MCS/RTD System : Moving now July 3, 2025 at 10:26 AM, N.Gábor F.A. : Hello Could you please check the job of this palette? S002128 July 3, 2025 at 10:26 AM, N.Gábor F.A. : @MCS/RTD System July 3, 2025 at 10:34 AM, Sazzad Bhai SKon : An user id SGCA498 manually change the location to a wrong place. This is the problem July 3, 2025 at 10:35 AM, N.Gábor F.A. : The palette is physically located at the specified position. July 3, 2025 at 10:37 AM, N.Gábor F.A. : Could you create a new job and send the mentioned material back to the M0STK013 warehouse? July 3, 2025 at 10:39 AM, MCS/RTD System : A manual job has been created July 3, 2025 at 10:39 AM, N.Gábor F.A. : Thank you much July 3, 2025 at 10:47 AM, 윤성제(Yoon SungJe) : Due to warehouse error, empty Dunnage pallet is being delayed. FA team is taking action. July 3, 2025 at 10:56 AM, FA/CS/AGV_ Asjad : @MCS/RTD System Could you please send AGV #6 pallet ID: T703500 to its destination Thank You! July 3, 2025 at 10:57 AM, Sazzad Bhai SKon : It has already a job. Is it on AgV now? July 3, 2025 at 10:58 AM, FA/CS/AGV_ Asjad : Yes, and the AGV is parked. July 3, 2025 at 10:59 AM, FA/CS/AGV_ Asjad : There is no Transfer job for it on ACS. July 3, 2025 at 11:01 AM, Sazzad Bhai SKon : Problem is MCS doesn't receive AGV installed message. So MCS can't locate it's current lol July 3, 2025 at 11:01 AM, Sazzad Bhai SKon : *location July 3, 2025 at 11:02 AM, FA/CS/AGV_ Asjad : Is it possible to delete its previous job and transfer it to its source then? July 3, 2025 at 11:06 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam/FA/MCS/RTD M0STK033 M0CNV034_P16 Carrier id : U030088 확인바랍니다 July 3, 2025 at 11:07 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam/FA/MCS/RTD M0STK033 M0CNV034_P16 Carrier id : U030088 Please check if the product is stopped. July 3, 2025 at 11:09 AM, 윤성제(Yoon SungJe) : @MCS M1MFA300_P01,T700488 The carrier is not coming. Please check it. July 3, 2025 at 11:10 AM, Sazzad Bhai SKon : STK33 inbound port was oos July 3, 2025 at 11:10 AM, FACS_Wooseok Choi : 조치 완료 했습니다. July 3, 2025 at 11:11 AM, MCS/RTD System : Source STK was 98% full. SENDING it to STK011. July 3, 2025 at 11:12 AM, FA/CS/AGV_ Asjad : Thank you July 3, 2025 at 11:13 AM, Sazzad Bhai SKon : STK 11 has many jobs. Bridge ports are oos, so transferring gets delayed July 3, 2025 at 11:16 AM, 윤성제(Yoon SungJe) : @FACS_Wooseok Choi 안녕하세요 매니저님 혹시 해당내용 확인 해 주실수 있으실까요? 모듈 1라인 셀 팔렛트 공급이 되지않고있습니다 July 3, 2025 at 11:19 AM, MCS/RTD System : @FA Please check M0STK028_C01 Crane PLC interface error July 3, 2025 at 11:25 AM, 윤성제(Yoon SungJe) : @배병민 (Bae Byoungmin) 안녕하세요 pm님 모듈 1,4라인 현재 셀 공급이 안되어 라인 정지할 것 같습니다 확인 해 주실수 있으실까요? July 3, 2025 at 11:26 AM, Sazzad Bhai SKon : We're monitoring, we'll increase the priority for module 1/2 July 3, 2025 at 11:29 AM, Sazzad Bhai SKon : M0STK011_C01 crane is idle for 8 minutes. Please check July 3, 2025 at 11:30 AM, N.Gábor F.A. : The crane is working continuously, I'm standing here and checking it July 3, 2025 at 11:31 AM, Sazzad Bhai SKon : Sorry crane 2. Is idle from 11:21 till 11:31 July 3, 2025 at 11:32 AM, Sazzad Bhai SKon : Crane 2 now activated July 3, 2025 at 11:32 AM, N.Gábor F.A. : No problem Crane number 1 held it up with its work. July 3, 2025 at 11:35 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 확인좀 바로해주세요 July 3, 2025 at 11:36 AM, 윤성제(Yoon SungJe) : 지금 반송중으로 바뀌었습니다 모니터링 하겠습니다 July 3, 2025 at 11:44 AM, Sazzad Bhai SKon : Could you please increase priority for T702966 from SCS? This is 4 line module material. July 3, 2025 at 11:47 AM, Sazzad Bhai SKon : Thank you, it got higher priority. Transferring now July 3, 2025 at 11:54 AM, FACS_Wooseok Choi : STK28 [F822 CIM 1501 crane plc interface error] SRC plc was down, so reset. July 3, 2025 at 11:57 AM, Sazzad Bhai SKon : Z102373: a manual job created from M0STK011 to M0CNV036_M02, job is not possible due to process type not matched. July 3, 2025 at 11:57 AM, MCS/RTD System : Done. Thank you July 3, 2025 at 12:38 PM, FACS_Wooseok Choi : @Sazzad Bhai SKon m0stk011_m01_bp01 z102694 job delete plzz, and why z102359 pause? Plz inform me. July 3, 2025 at 12:47 PM, MCS/RTD System : Job has been canceled. Also, everything seems fine for Z102359. The crane is busy. July 3, 2025 at 12:48 PM, FACS_Wooseok Choi : Thank u July 3, 2025 at 12:59 PM, Sazzad Bhai SKon : Module 1/4 line jobs are normal now. Everything good. July 3, 2025 at 1:04 PM, 윤성제(Yoon SungJe) : Thank you very much. July 3, 2025 at 1:10 PM, FA/CS/AGV_ Asjad : @MCS/RTD System Can you send Pallet Id: Z102696 (AGV# 8) back to its source. Thank you! July 3, 2025 at 1:13 PM, FA/CS/AGV_ Asjad : Also Pallet Id: T705106 (AGV#9) Thank you! July 3, 2025 at 1:15 PM, FA/CS/AGV_ Asjad : @MCS/RTD System July 3, 2025 at 1:16 PM, MCS/RTD System : The location became NA. Please confirm the location for Z102696 July 3, 2025 at 1:18 PM, FA/CS/AGV_ Asjad : You can send it to M0STK013 July 3, 2025 at 1:18 PM, FA/CS/AGV_ Asjad : Thank you July 3, 2025 at 1:18 PM, MCS/RTD System : It's on M0MGV011_VC17, RIGHT? July 3, 2025 at 1:20 PM, FA/CS/AGV_ Asjad : M0MGV011_VC 9 not 17 July 3, 2025 at 1:23 PM, FA/CS/AGV_ Asjad : @MCS/RTD System Please also send Pallet ID: S002177 its on VC 17 Thank you! July 3, 2025 at 1:26 PM, MCS/RTD System : Done July 3, 2025 at 1:28 PM, FA/CS/AGV_ Asjad : There is no transfer job created on ACS can you please again Thanks! July 3, 2025 at 1:29 PM, FA/CS/AGV_ Asjad : Check again* July 3, 2025 at 1:31 PM, MCS/RTD System : We've received a resultcode 99. Because stk013 is 98% full. July 3, 2025 at 1:32 PM, MCS/RTD System : Sending those to stk011 July 3, 2025 at 1:32 PM, FA/CS/AGV_ Asjad : Now, VC17 is moving but others are still in parking. Thanks July 3, 2025 at 1:34 PM, MCS/RTD System : Others will move too July 3, 2025 at 1:37 PM, MCS/RTD System : @FA PLEASE CHECK M0STK011_P05/P06 Ports are OOS Thank you July 3, 2025 at 1:51 PM, Delosa Viki (데로사) left this chatroom. July 3, 2025 at 3:05 PM, 승규 (BAEK SEUNGGYU) : This message was deleted. July 3, 2025 at 3:48 PM, FA/CS/AGV_ Asjad : @MCS/RTD System Could you please delete the current job of VC 17 (P ID:Z102707) and send it back to stk as the line is out of service and AGV is low on battery. Thank you! July 3, 2025 at 3:52 PM, Sazzad Bhai SKon : Transfer initiated, dest: STK 011 July 3, 2025 at 4:15 PM, 승규 (BAEK SEUNGGYU) : @FA M4MFA300_P02 T703238 The corresponding pallet is not coming. Please check. July 3, 2025 at 4:18 PM, Sazzad Bhai SKon : There is job, but STK is slow. I increase the priority July 3, 2025 at 4:30 PM, Sazzad Bhai SKon : @SCS Please increase the priority for this carrier. M0STK013 July 3, 2025 at 4:32 PM, N.Gábor F.A. : Done Incrased to 99 July 3, 2025 at 4:48 PM, N.Gábor F.A. : @MCS Can you delete this palette job? S002094, it's transferong status more than 4 hours ago... Currently in M0STK013 0200604 July 3, 2025 at 4:49 PM, N.Gábor F.A. : And the T703238 palette still don't moving, beacouse is queued status July 3, 2025 at 4:51 PM, 승규 (BAEK SEUNGGYU) : M4MFA300_P02 The line is slowly running out of cells. T703238 I hope the palette will come soon. July 3, 2025 at 4:58 PM, Sazzad Bhai SKon : Crane active now, coming July 3, 2025 at 4:58 PM, N.Gábor F.A. : Now is already moving July 3, 2025 at 5:05 PM, Sazzad Bhai SKon : @N.Gábor F.A. one request. In this situation please increase priority from SCS. Because MCS priority doesn't work after job creation. July 3, 2025 at 5:06 PM, N.Gábor F.A. : I did it, but later, when I investigated, I found an error somewhere else that was holding up the process, but unfortunately it didn't give an error message anywhere. July 3, 2025 at 5:12 PM, 승규 (BAEK SEUNGGYU) : Arrived. Thank you. July 3, 2025 at 5:12 PM, N.Gábor F.A. : Next palette is on route July 3, 2025 at 5:37 PM, 승규 (BAEK SEUNGGYU) : @FA 금일 5시 40분부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 및 이동 지원 부탁드립니다 July 3, 2025 at 5:37 PM, FA/CS/AGV_ Asjad : Sure July 3, 2025 at 9:03 PM, András : Sziasztok GF floor position error July 3, 2025 at 9:03 PM, Zoltán Harasztia FA : Megyek July 3, 2025 at 9:05 PM, Zoltán Harasztia FA : Kész July 3, 2025 at 9:05 PM, András : Köszi July 3, 2025 at 10:43 PM, Ági : Sziasztok GF stop time error July 3, 2025 at 10:44 PM, Zoltán Harasztia FA : Nézzük July 3, 2025 at 10:45 PM, Ági : Köszi July 3, 2025 at 10:46 PM, Zoltán Harasztia FA : Kész July 3, 2025 at 10:59 PM, András : 2F hátsó raktárban hiba van July 3, 2025 at 10:59 PM, Zoltán Harasztia FA : Már úton vagyunk July 4, 2025 at 12:08 AM July 4, 2025 at 12:08 AM, VK (mcs) : @FA Please check M0STK027 Crane fork right wide#1 check error. Also please check M0STK024 Crane fork left collapse detect 1 July 4, 2025 at 12:08 AM, Zoltán Harasztia FA : Cheking July 4, 2025 at 12:20 AM, Zoltán Harasztia FA : Solved July 4, 2025 at 2:17 AM, András : 2F product detect error July 4, 2025 at 2:18 AM, Döme György F.A : Megyünk July 4, 2025 at 3:31 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA please check M0STK012_P09 C/V data mismatch error July 4, 2025 at 3:31 AM, Zoltán Harasztia FA : Coming July 4, 2025 at 3:36 AM, Zoltán Harasztia FA : Solved July 4, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.04. 10+2/12+2 Tech, 1Sl, 1Sup. Overtime(1): Szabadi Miklós Holiday(2): Gerbovits Kevin, Böröcz Tamás Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János July 4, 2025 at 8:11 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Good morning, Please check M0CNV032_P01 there is Stop detect error and job for AGV#14 is getting delayed. Thank you very much! July 4, 2025 at 8:13 AM, Denkó Jani (F.A.) : Checking July 4, 2025 at 8:13 AM, Mohammad Amir : Good morning @Boromisza Zoltán Please check M0STK033_P02 it is in Manual mode,it could cause delay in future. So please make this Port auto. Thank you very much! July 4, 2025 at 8:17 AM, Denkó Jani (F.A.) : All solved July 4, 2025 at 8:17 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 8:40 AM, Mohammad Amir : Dear @All, For your information:- Currently there is fire sensor alaram check is taking place by FA so you might face delay in jobs for Box packing which has route through STK014 (For example:-S002082,S002017). Thank you very much for your patience. July 4, 2025 at 8:44 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check STK022_C01 there is Double cargo error and it is blocking several jobs. Thank you very much! July 4, 2025 at 8:45 AM, Denkó Jani (F.A.) : Going July 4, 2025 at 8:51 AM, Denkó Jani (F.A.) : Solved July 4, 2025 at 8:52 AM, Mohammad Amir : Jobs have been normalized. ✅ Thank you very much! July 4, 2025 at 8:57 AM, Mohammad Amir : This message was deleted. July 4, 2025 at 8:57 AM, Mohammad Amir : Dear @All, Update:- Now STK014 has come back to service after inspection and now jobs for Box packing has been normalized ✅. Materials on the way. Thank you very much! July 4, 2025 at 9:11 AM, 윤성제(Yoon SungJe) : @MCS Hello, M1MFA300_P18, PF220-2506300017 could you change the destination of this carrier to M1MFA300_P35? July 4, 2025 at 9:12 AM, Mohammad Amir : Good morning, Checking! July 4, 2025 at 9:13 AM, Mohammad Amir : Unfortunately I don't have permission to send it to process machine (M1MFA300_P35). If you don't need this material at P18 ,I will send it back to warehouse. Please let me know should I send it back to warehouse. Thank you very much! July 4, 2025 at 9:14 AM, 윤성제(Yoon SungJe) : Yes, please send it back to the warehouse. July 4, 2025 at 9:15 AM, Mohammad Amir : Sure , working on it. July 4, 2025 at 9:20 AM, Mohammad Amir : I have successfully created the command to send this carrier to its source warehouse ✅. Now AGV#2 has assigned . I am monitoring for smooth delivery back to warehouse. Thank you very much! July 4, 2025 at 9:20 AM, 윤성제(Yoon SungJe) : Thank you so much for your help. July 4, 2025 at 9:22 AM, Mohammad Amir : You are welcome! July 4, 2025 at 9:29 AM, Mohammad Amir : @Denkó Jani (F.A.) Please check STK022_C01 there is Double cargo error and it is blocking several jobs. Thank you very much! July 4, 2025 at 9:29 AM, Denkó Jani (F.A.) : Going July 4, 2025 at 9:38 AM, Mohammad Amir : Update:- Carrier PF220-2506300017 has been successfully stored in STK023(0101709) ✅ Feel free to contact me again if you need any further assistance. Thank you very much! July 4, 2025 at 9:55 AM, Denkó Jani (F.A.) : Solved July 4, 2025 at 9:56 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 10:44 AM, Kovács Kármen : @Denkó Jani (F.A.) @Boromisza Zoltán ACS Fire alarm az AGVkent line 5 előtt July 4, 2025 at 10:44 AM, Boromisza Zoltán : Oké July 4, 2025 at 10:49 AM, Denkó Jani (F.A.) : Photo July 4, 2025 at 10:49 AM, Denkó Jani (F.A.) : Megy minden 🤷🏻‍♂️ July 4, 2025 at 10:56 AM, Kovács Kármen : Mert már megcsinálták előttetek 😉 July 4, 2025 at 10:56 AM, Boromisza Zoltán : Tudjuk July 4, 2025 at 10:56 AM, Denkó Jani (F.A.) : Lényegen nem változtat,megy minden 😁 July 4, 2025 at 11:30 AM, 윤성제(Yoon SungJe) : @SKOH2/제조-셀,모듈 출하/김병호 안녕하세요 주임님 U031579 수동출고 해 주실수 있으실까요? 모듈 하나가 누락이되어서 실물 확인이 필요합니다.. July 4, 2025 at 11:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네, 오전 이관 작업 완료후에 2~3시 사이에 배출하고 알림 드리도록 하겠습니다 July 4, 2025 at 11:41 AM, 유주환(Yoo Joohwan) : 감사합니다 July 4, 2025 at 11:41 AM, 윤성제(Yoon SungJe) : 정말 감사합니다 July 4, 2025 at 11:42 AM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 July 4, 2025 at 1:39 PM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check and make M0CNV033_M03 to auto mode , currently it is in Manual mode and because of this several jobs are pending. Thank you very much! July 4, 2025 at 1:41 PM, Boromisza Zoltán : Okey July 4, 2025 at 1:45 PM, Boromisza Zoltán : there are Korean colleagues there July 4, 2025 at 1:46 PM, Mohammad Amir : Thank you very much! July 4, 2025 at 1:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 GF M0CNV033_RTV01 알람없이 기동 정지 상태입니다 확인 부탁드립니다 July 4, 2025 at 1:48 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS North module dock GF M0CNV033_RTV01 It's on stay without alarm Please check July 4, 2025 at 1:52 PM, Mohammad Amir : Checking July 4, 2025 at 1:54 PM, Mohammad Amir : I have resolved the issue ✅ RTV has started to work again. Thank you very much! July 4, 2025 at 2:55 PM, Niki (Modul) : @Boromisza Zoltán SOSbe kelletek a fóliázógéphez! Nem vágta el a fóliát,de nem is állt vissza az eredeti pozícióba! July 4, 2025 at 2:57 PM, Boromisza Zoltán : Megyek July 4, 2025 at 3:09 PM, Boromisza Zoltán : Kész July 4, 2025 at 3:39 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. July 4, 2025 at 3:40 PM, SKOH2/제조-셀,모듈 출하/김병호 : @윤성제(Yoon SungJe) @유주환(Yoo Joohwan) 4시에 도크장에서 확인하시면 되실거 같습니다. July 4, 2025 at 4:18 PM, Niki (Modul) : @Boromisza Zoltán Hátsó raktárból nem jön ki az anyag July 4, 2025 at 4:19 PM, Boromisza Zoltán : Megyek July 4, 2025 at 4:29 PM, Boromisza Zoltán : Kész July 4, 2025 at 4:29 PM, Niki (Modul) : Köszöntem 🙂 July 4, 2025 at 4:46 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M3MFA300_P21 it is OOS and because of this one job is pending. Thank you very much! July 4, 2025 at 4:49 PM, Farkas Misi : Sziasztok! M0CNV033 raktárban Meg állt a lift. Rá tudnátok nézni? Köszönöm July 4, 2025 at 4:51 PM, FACS_JaewonShin : I am going July 4, 2025 at 4:54 PM, Denkó Jani (F.A.) : Solved July 4, 2025 at 4:55 PM, Mohammad Amir : Thank you very much July 4, 2025 at 5:09 PM, Horváth Adriàn : @Denkó Jani (F.A.) line 3 papír hulladékos port hibàval àll. Check pls. July 4, 2025 at 5:11 PM, Denkó Jani (F.A.) : Solved 🤝 July 4, 2025 at 5:12 PM, Horváth Adriàn : Ezt is megcsinàltam(crackup) July 4, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 4, 2025 at 7:21 PM, VK (mcs) : @FA Please check 2F M0CNV023 (34036) Run time over error. July 4, 2025 at 7:21 PM, Alexandra : 2f cv036 stop detect error July 4, 2025 at 7:37 PM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M0STK14_P08 PIO interface error July 4, 2025 at 7:41 PM, VK (mcs) : @FA Please check M0CNV032 Stop detect error. July 4, 2025 at 7:44 PM, Édl Tamás : Solved July 4, 2025 at 7:45 PM, Brázik János : Solved July 4, 2025 at 8:24 PM, Sánta László : Empty dunnages are not arriving at Line 1. Please check the reason. Thank you. July 4, 2025 at 8:25 PM, 승규 (BAEK SEUNGGYU) : It's a little late to transfer the replenishment module. July 4, 2025 at 8:25 PM, Sánta László : Ok, thy July 4, 2025 at 8:42 PM, VK (mcs) : @FA Please check M0CNV032 -RTV RTV car destination sensor time delay. July 4, 2025 at 8:49 PM, Brázik János : Solved July 4, 2025 at 9:30 PM, Magosi Erik : @Csepi Árpád dokk area 15. Agv in error. Please check. July 4, 2025 at 9:30 PM, Magosi Erik : Thank You July 4, 2025 at 9:30 PM, FA-CS-AGV-Masoud : Coming July 4, 2025 at 9:33 PM, VK (mcs) : @FA Please check M0CNV032 -P01 Stop detect error. July 4, 2025 at 9:33 PM, FA-CS-AGV-Masoud : This message was deleted. July 4, 2025 at 9:34 PM, FA-CS-AGV-Masoud : It’s not AGV problem port is under alarm, Thanks July 4, 2025 at 10:01 PM, FACS_Youngmin LEE : solved July 4, 2025 at 10:10 PM, Alexandra : 2f conveyor det error, slow time over July 4, 2025 at 10:21 PM, Csepi Árpád : Solved July 4, 2025 at 10:47 PM, VK (mcs) : @FA Please check 1st cell buffer M0STK011 Crane unload timeout error. July 4, 2025 at 10:48 PM, FACS_Youngmin LEE : Action is being taken. July 4, 2025 at 11:13 PM, Magosi Erik : @FA-CS-AGV-Masoud can You check L3-L4 materail agv. They blocking eachother July 4, 2025 at 11:13 PM, Magosi Erik : Thank You July 4, 2025 at 11:13 PM, FA-CS-AGV-Masoud : Sure on the way July 4, 2025 at 11:15 PM, FA-CS-AGV-Masoud : Solved July 4, 2025 at 11:16 PM, Magosi Erik : Thank You Sir July 4, 2025 at 11:55 PM, Maczó Anikó : Sziasztok 2f 84018 raktárból nem jön ki az anyag July 5, 2025 at 12:02 AM July 5, 2025 at 12:02 AM, Csepi Árpád : Megyek July 5, 2025 at 12:48 AM, FACS_Youngmin LEE : @Mohammad Amir plz make ACS job M0STK011_P13_OP01 Pallet ID:T704833 Full July 5, 2025 at 12:48 AM, Csepi Árpád : @FACS_Youngmin LEE I need assistance! The inverter on the 2nd floor of M0CNV023-LF#1 cannot be switched back on. July 5, 2025 at 12:48 AM, FACS_Youngmin LEE : ok i will go soon July 5, 2025 at 12:48 AM, FA-CS-AGV-Masoud : @VK (mcs) July 5, 2025 at 12:52 AM, VK (mcs) : Carrier location in MCS is NA, and also it has job to the M0STK012 July 5, 2025 at 1:07 AM, FACS_Youngmin LEE : @VK (mcs) plz make carrier location M0STK011_P06 PALLET ID:S002335 This carrier on the M0STK011_P06 July 5, 2025 at 1:09 AM, VK (mcs) : Information is same with MCS. Carrier location is in port 6 first cell buffer July 5, 2025 at 1:10 AM, FACS_Youngmin LEE : In scs dont have carrier location July 5, 2025 at 1:12 AM, VK (mcs) : Then it should fix by SCS , there is nothing to do with MCS right now. July 5, 2025 at 1:39 AM, Sánta László : @Csepi Árpád egyes- kettes sor végében lévő alapanyag raktár szállító pályája hibában áll. Nézzétek meg légyszi, mert nem érkezi alkatrész, de nem is viszi el az üreset. Köszönöm! July 5, 2025 at 1:52 AM, Csepi Árpád : Szia! Folyamatban van a javítása! July 5, 2025 at 1:52 AM, Mr.Miti (미티) FA : This message was deleted. July 5, 2025 at 1:52 AM, Csepi Árpád : Ha minden igaz pár perc és üzemelni fog! July 5, 2025 at 1:56 AM, Sánta László : Köszönöm szépen!(thumbsup) July 5, 2025 at 1:59 AM, Csepi Árpád : Elkészült! July 5, 2025 at 1:59 AM, FACS_Youngmin LEE : 셀버퍼 창고 꽉 찬 상태로 계속 파레트 들어오던 상황의 여파로 데이터 꼬임 현상과 다수의 에러가 동시다발적으로 일어나 조치중입니다. 시간이 많이 소요 될 것 같습니다. July 5, 2025 at 2:06 AM, Sánta László : Köszönöm szépen Árpi! July 5, 2025 at 2:11 AM, FACS_Youngmin LEE : @VK (mcs) Can you move anywhere this pallet July 5, 2025 at 2:12 AM, Sánta László : Also on Line 1, at the beginning of the line, two AGVs are blocking each other and holding up the traffic. Could you please move them out of the way? Thanks! July 5, 2025 at 2:13 AM, FA-CS-AGV-Masoud : Coming July 5, 2025 at 2:14 AM, Sánta László : Árpi is already there, but thanks anyway! July 5, 2025 at 2:22 AM, Maczó Anikó : Sziasztok 2f 3 gépnél cv026 waiting for the other party's response July 5, 2025 at 2:22 AM, VK (mcs) : This message was deleted. July 5, 2025 at 2:22 AM, VK (mcs) : Carrier location is NA and also port is out of service. MCS cannot create a command July 5, 2025 at 2:25 AM, Sánta László : The Lower Case on Line 1 will run out soon. There is one pallet in the buffer, but the AGV is not picking up the empty P boxes. July 5, 2025 at 2:25 AM, Sánta László : Please check it! July 5, 2025 at 2:25 AM, Sánta László : The warehouse conveyor on the ground floor is still not working. July 5, 2025 at 2:30 AM, Csepi Árpád : Solved July 5, 2025 at 2:31 AM, Sánta László : Thank you!(thumbsup) July 5, 2025 at 2:42 AM, Maczó Anikó : Sziasztok 2f 3 gép cv036 stop detect error Cv036 product detect error July 5, 2025 at 3:00 AM, Édl Tamás : Kész July 5, 2025 at 3:10 AM, Sánta László : AGV is not delivering the cell to Line 1 in any of the blocks. Please check the cause as soon as possible, because the cell will run out shortly. July 5, 2025 at 3:16 AM, VK (mcs) : For both , jobs assigned from STK 13 but there is an issue in the STK. technicians are working on it. July 5, 2025 at 3:19 AM, Sánta László : Okay, thy! July 5, 2025 at 6:12 AM, Kurkó Péter : Helló 1line 1-2 block cellára vár valaki nézzen rá köszi July 5, 2025 at 6:30 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.05. 10+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Gerbovits Kevin Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János, Boromisza Zoltán --------- July 5, 2025 at 6:48 AM, Denkó Jani (F.A.) : Solved July 5, 2025 at 7:50 AM, Kovács Kármen : @Denkó Jani (F.A.) @Boromisza Zoltán Sziasztok! Alapanyag lifthez szeretnénk segítséget kérni. Köszi July 5, 2025 at 7:50 AM, Kovács Kármen : Line 3 July 5, 2025 at 7:51 AM, MCS/RTD System : @FA PLEASE TAKE A LOOK AT M0CNV023_35_004 DIV REDIRECT CV STOP ERROR THANKS July 5, 2025 at 7:53 AM, Denkó Jani (F.A.) : Solved July 5, 2025 at 12:38 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán line 3 üres FRC dobozokat nem viszi el a vas. Mintha nem kapnànak utasitàst h elkell vinni. Nézzetek rà pls. July 5, 2025 at 12:39 PM, Denkó Jani (F.A.) : Megyünk July 5, 2025 at 12:51 PM, Denkó Jani (F.A.) : @MCS/RTD System @duzzaman Md (MCS) @Mohammad Amir @Shahbaz 샤바즈 MCS/RTD @Shakir (MCS) Please return the PS210-2606100013 pallet on the M3MFA300_P32 port to the warehouse. For some reason the task is not generated automatically, thank you. July 5, 2025 at 12:52 PM, Denkó Jani (F.A.) : To M0CNV023_P32 July 5, 2025 at 12:53 PM, MCS/RTD System : On it July 5, 2025 at 12:57 PM, MCS/RTD System : Could you please recheck the carrier no ? According to MCS, PS210-2506180060 is there at P32 of M3MFA300 July 5, 2025 at 12:58 PM, Denkó Jani (F.A.) : The wrong palette number is there, please change the palette data as well. July 5, 2025 at 1:15 PM, MCS/RTD System : Transfer initiated already. Thank you July 5, 2025 at 1:16 PM, Denkó Jani (F.A.) : The pallet has been successfully delivered to M0CNV023_P32 (PS210-2506100013). PLEASE GIVE IT A DESTINATION. July 5, 2025 at 1:24 PM, Roischek Sanyi : Line 3 3-6 Csavarozó fej szétesett, összeszerelés. 13:15-13:22 July 5, 2025 at 1:29 PM, 윤경환 : @ MCS/RTD Hello. Please move the "Full" W00xxx all pallet to GF port in raw material warehouse. Please send to M0CNV021 M03/04. July 5, 2025 at 1:30 PM, Denkó Jani (F.A.) : Can you solve it? July 5, 2025 at 1:30 PM, MCS/RTD System : Moving again. July 5, 2025 at 1:30 PM, MCS/RTD System : Job is getting terminated July 5, 2025 at 1:36 PM, Denkó Jani (F.A.) : Please give the palette a destination and it will start.... I would do it if I had the permission to do so, but I don't.... but this palette is also hindering the progress of other products. July 5, 2025 at 1:40 PM, MCS/RTD System : Transfer initiated. We are getting HCACK 0 reply , AGV being assigned, then vehicle arrived , vehicle unassigned and transfer getting terminated July 5, 2025 at 1:40 PM, MCS/RTD System : @ACS PLEASE check July 5, 2025 at 1:42 PM, Denkó Jani (F.A.) : What kind of AGV are you ordering for where??? It should go on the conveyor, through the elevator to the warehouse.... no AGV is needed for it...🤯 July 5, 2025 at 1:54 PM, FACS_오창훈_CHANGHOON : Any warehouse from 21 to 25 is fine? I will try make the order by ccs. July 5, 2025 at 1:55 PM, Sazzad Bhai SKon : Let me check the process type July 5, 2025 at 1:56 PM, Denkó Jani (F.A.) : Do it 💪🏻 July 5, 2025 at 1:57 PM, FACS_오창훈_CHANGHOON : It will go to warehouse number 21 July 5, 2025 at 1:57 PM, Duna Don : Thank you! July 5, 2025 at 2:02 PM, FA/CS/AGV_ Asjad : @MCS/RTD System Could you please check EOL 2, 4, and 5? No pallets are arriving at these lines Thanks! July 5, 2025 at 2:04 PM, duzzaman Md (MCS) : Sent. Only two carriers were okay. Other are NA July 5, 2025 at 2:07 PM, MCS/RTD System : EOL2 vehicle departed July 5, 2025 at 2:27 PM, Sazzad Bhai SKon : This pallet was at M0STK025 (0202008), please check if there's any carrier there July 5, 2025 at 2:28 PM, Sazzad Bhai SKon : There's no log how it transferred from shelf to CNV P32 July 5, 2025 at 2:29 PM, 윤경환 : Thank you. July 5, 2025 at 2:34 PM, Sazzad Bhai SKon : EOL 5 line P01 is in manual mode July 5, 2025 at 2:36 PM, Duna Don : They were loading manually, but now it is in automatic mode. July 5, 2025 at 3:40 PM, 윤경환 : @FA Hello. Please check the CV031 product Detect Error. July 5, 2025 at 3:45 PM, FACS_오창훈_CHANGHOON : CNV31 이야기 하는 걸까요? July 5, 2025 at 3:45 PM, FACS_오창훈_CHANGHOON : 위치를 정확히 알려주면 도움이 되겠습니다 July 5, 2025 at 3:46 PM, 윤경환 : 모듈 자재 입고장 July 5, 2025 at 3:53 PM, FACS_오창훈_CHANGHOON : 조치 되었습니다 July 5, 2025 at 3:56 PM, 윤경환 : 감사 합니다. July 5, 2025 at 3:57 PM, 윤경환 : 다른거 급하게 하다가 말을 너무 짧게 보내드렸네요. 죄송 합니다.ㅠㅠ July 5, 2025 at 3:59 PM, FACS_오창훈_CHANGHOON : 괜찮습니다 July 5, 2025 at 4:01 PM, MCS/RTD System : @FA PLEASE CHECK M0CNV021_RTV01 IT'S OOS. THANK YOU July 5, 2025 at 4:05 PM, Boromisza Zoltán : Okey July 5, 2025 at 4:10 PM, Boromisza Zoltán : Solved July 5, 2025 at 4:38 PM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Megakadt a paletta az alapanyag raktàr CVn line 3-4 között. Product detect error. Vàgjàtok helyre pls. July 5, 2025 at 4:39 PM, Denkó Jani (F.A.) : Mindjárt going July 5, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Sopronyi Gábor Attila Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Novák Károly Novák Zoltán ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 5, 2025 at 6:32 PM, VK (mcs) : @FA Please check M0STK014 -port 2 S002449 job for it has been cancelled and now it’s stopped in the port. Destination was M0STK014 July 5, 2025 at 6:34 PM, FACS_Youngmin LEE : now handling July 5, 2025 at 6:35 PM, FA/CS/AGV/Taimur : This message was deleted. July 5, 2025 at 7:03 PM, VK (mcs) : @FA Please check S002507 located in M0STK12_P11 It’s not moving to destination for a while. July 5, 2025 at 8:18 PM, VK (mcs) : @FA M0STK013 -C01 MCS indicates, carrier T701995 is on the crane. Can you please check is there actual carrier there. July 5, 2025 at 8:20 PM, FACS_Youngmin LEE : no dont have carrier July 5, 2025 at 8:20 PM, VK (mcs) : Is there job exist for T701995 in the SCS? July 5, 2025 at 8:21 PM, FACS_Youngmin LEE : Yes but dont have carrier location July 5, 2025 at 8:23 PM, VK (mcs) : According to MCS, carrier transferred by crane and alarm occurred ( crane carrier sensor data mismatch ) July 5, 2025 at 8:23 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE 조치 문제있나요? July 5, 2025 at 8:24 PM, FACS_Youngmin LEE : 1F 공파레트 배출이 되면 해결 될 상황입니다. 지게차 요청해놓았습니다. July 5, 2025 at 8:25 PM, FACS_Youngmin LEE : 1F 메뉴얼포트로 작업이 4개정도 쌓여있습니다. July 5, 2025 at 8:26 PM, 배병민 (Bae Byoungmin) : 그것땜에 자동화가 문제되는게 없을텐데요... 수동배출되면서 잡은 자동 처리됩니다 저희가 신경쓸일은 아닙니다 July 5, 2025 at 8:27 PM, VK (mcs) : Any information about carrier location ? It was in the shelf (0101209) And now MCS shows it’s on the crane. Do I need to any action? July 5, 2025 at 8:29 PM, FACS_Youngmin LEE : 네 자동화 문제는 없습니다. July 5, 2025 at 8:30 PM, VK (mcs) : I see, job terminated , thanks for confirmation July 5, 2025 at 8:30 PM, FACS_Youngmin LEE : deleted job . solved. thank you July 5, 2025 at 8:31 PM, Maczó Anikó : Sziasztok 2f 3gépnél Conveyor det error Gf slow time over July 5, 2025 at 8:32 PM, FACS_Youngmin LEE : 1F 셀버퍼 메뉴얼 포트로 공파레트들이 배출중이며 지게차가 수동으로 떠서 바닥에 적재하는 상황입니다. 현재 자동화 공정에 문제 없습니다. July 5, 2025 at 8:38 PM, 배병민 (Bae Byoungmin) : 화성에서 셀버퍼창고 공팔레트 배출하여 적재율 낮추고있는것입니다. 설비/시스템적 오류 부분으로 모니터링해주시고 Job이 많이 쌓여도 임의로 삭제는 절대하지마세요 수동 Job이 쌓여있어도 크레인은 정상 반송 Rull에 따라 진행됩니다 July 5, 2025 at 8:39 PM, FACS_Youngmin LEE : 네 알겠습니다. July 5, 2025 at 9:18 PM, Csepi Árpád : Solved July 5, 2025 at 9:53 PM, Sánta László : @Csepi Árpád kérlek nézzetek rà az egyes sor végében a lifterre, mert a bemenő raklap elakadt a cv és a lifter között. Köszönöm July 5, 2025 at 10:06 PM, Csepi Árpád : Solved July 5, 2025 at 10:07 PM, Sánta László : Köszönöm July 5, 2025 at 11:29 PM, VK (mcs) : @FA Please check M0STK034 MCP GF OP2 light curtain detect error. July 5, 2025 at 11:36 PM, Sánta László : Sziasztok! A modul dokknál le van halva egy AGV és feltartja a barátait. Meg tudnátok nézni?! Előre is köszi! July 5, 2025 at 11:38 PM, FA/CS/AGV/Taimur : Solved July 5, 2025 at 11:52 PM, Sánta László : Thank you so much! July 5, 2025 at 11:53 PM, FACS_Youngmin LEE : solved July 6, 2025 at 1:17 AM July 6, 2025 at 1:17 AM, Alexandra : 2f cv003 stop detect error July 6, 2025 at 1:21 AM, Csepi Árpád : Solved July 6, 2025 at 1:39 AM, Sánta László : Segítségre lenne szükségem az egyes sor alsó ( LWR case ) burkolat gantry-nél. In oldalon magasság hiba miatt kiáll hibára. Nem látom, hogy mi lehet a probléma. Nézze meg nekem valaki légyszíves. Köszönöm! July 6, 2025 at 2:26 AM, FACS_Youngmin LEE : solved July 6, 2025 at 2:27 AM, Sánta László : Thank you so much!🤝🏼 July 6, 2025 at 3:37 AM, Édl Tamás : 04:00-kor a 14-es raktárban a darukat tervezett karbantartás miatt leállítom. A karbantartás ideje alatt a raktár teljesen inaktív lesz. A munka tervezett időtartama 20-25 perc! July 6, 2025 at 3:59 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5. Remark(specialote) : -x July 6, 2025 at 4:21 AM, VK (mcs) : @FA Please check M0STK026 Crane fork left WIDE#2 check error. July 6, 2025 at 4:24 AM, Édl Tamás : 14es raktárban a karbantartás befejeződött! July 6, 2025 at 4:39 AM, Brázik János : Solved July 6, 2025 at 5:55 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5:54 5. Remark(specialote) : -x July 6, 2025 at 6:13 AM, Kurkó Péter : Hello 1line lower case gantry stopped has axis #1 y1#2 y2 error Pls fix it Thx July 6, 2025 at 6:15 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5:54 5. Remark(specialote) : -2번 밴딩기 히팅 제대로 못하고 풀림 커버 탈거 후 내부 클리닝 및 X111 근접센서 클리닝 July 6, 2025 at 6:24 AM, Horváth Adriàn : @Denkó Jani (F.A.) @Boromisza Zoltán Line 3 endplate gantry rosszul fogta meg a dobozt. Egyik felét nem fogja.. Check pls July 6, 2025 at 6:26 AM, MCS/RTD System : @FA PLEASE CHECK M0CNV021_RTV01 RTV CAR FIBE4 COMMUNICATION ERROR. THANK YOU July 6, 2025 at 6:30 AM, FACS_Wooseok Choi : Solved July 6, 2025 at 6:31 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.06. 9+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Denkó János Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(1): Boromisza Zoltán ------------ July 6, 2025 at 6:42 AM, Kurkó Péter : Solved July 6, 2025 at 6:52 AM, FACS_Wooseok Choi : M0STK022, I will switch to manual for cim 1501 crane plc error July 6, 2025 at 6:56 AM, FACS_Wooseok Choi : Clear July 6, 2025 at 7:03 AM, Boromisza Zoltán : Solved July 6, 2025 at 8:31 AM, MCS/RTD System : @FA PLEASE CHECK M0CNV035_RTV01 It's OOS. THANK YOU July 6, 2025 at 8:46 AM, Boromisza Zoltán : Okey July 6, 2025 at 8:46 AM, FACS_오창훈_CHANGHOON : Solved July 6, 2025 at 10:55 AM, Kurkó Péter : Hello 1line not has empty dunnage Pls fix it July 6, 2025 at 10:55 AM, FA CS AGV Jawad : STK 12, alarm, can someone plz check July 6, 2025 at 11:03 AM, MCS/RTD System : There's active job for line 1 July 6, 2025 at 11:04 AM, Boromisza Zoltán : Solved July 6, 2025 at 11:09 AM, FA CS AGV Jawad : @FA can you plz check STK11.. ? CV data mismatch nohting error. July 6, 2025 at 11:10 AM, FACS_오창훈_CHANGHOON : Solved July 6, 2025 at 11:19 AM, FACS_Wooseok Choi : Solved July 6, 2025 at 11:19 AM, FA CS AGV Jawad : Thank you July 6, 2025 at 12:12 PM, Niki (Modul) : @Boromisza Zoltán hátul a raktárban sír a gép July 6, 2025 at 12:13 PM, Boromisza Zoltán : Megyek July 6, 2025 at 12:22 PM, Boromisza Zoltán : Kész July 6, 2025 at 1:48 PM, Kurkó Péter : Helló line1 en a bma out portra valaki nézzen rá kiállt hibára és nem lehet törölni köszi July 6, 2025 at 5:25 PM, Niki (Modul) : @Boromisza Zoltán hátsó raktárnál gond van July 6, 2025 at 5:26 PM, Boromisza Zoltán : Megyek July 6, 2025 at 5:39 PM, Boromisza Zoltán : Kész July 6, 2025 at 5:41 PM, FACS_Youngmin LEE : ■ 6th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 6, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Gutenkunst Ábel Zoltán Benczik Ádám Bonnyai Ákos ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 7:06 PM, Maczó Anikó : Sziasztok 2f @Csepi Árpád sír hátul a raktár de hibát nem jelez csak sír meg néznéd léci . Köszönöm July 6, 2025 at 7:28 PM, Csepi Árpád : Kész July 6, 2025 at 9:35 PM, Magosi Erik : @Csepi Árpád kitudsz kérlek a 3as sor uppercase gantryhez? Nem akar az agv betölteni July 6, 2025 at 9:35 PM, Magosi Erik : Köszi July 6, 2025 at 9:45 PM, FA/CS/AGV/Taimur : Sorted. July 6, 2025 at 9:48 PM, Magosi Erik : Thank You July 6, 2025 at 9:48 PM, Magosi Erik : Does the agv loading the uppercase into gantry? July 6, 2025 at 9:56 PM, FA/CS/AGV/Taimur : Yes Upper case pallet is on CNV right now. July 6, 2025 at 9:56 PM, Magosi Erik : Thank You Sir July 6, 2025 at 9:57 PM, FA/CS/AGV/Taimur : Anytime Uram. 🤝 July 7, 2025 at 2:05 AM July 7, 2025 at 2:05 AM, Maczó Anikó : Sziasztok 2f @Csepi Árpád cv037 pallet overhang det error Köszönöm July 7, 2025 at 2:14 AM, Csepi Árpád : Kész July 7, 2025 at 2:55 AM, Maczó Anikó : Sziasztok 2f nem viszi el a lift az anyagot érdeklődnék hogy valami valahol fent akadás miatt már 30 perce gyűlik az anyag ? July 7, 2025 at 2:55 AM, Mohammad Amir : Checking July 7, 2025 at 2:56 AM, Mohammad Amir : @Csepi Árpád Please check PS290-2503250002 located at CNV023_35_037 ,it is not moving and blocking materials delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! July 7, 2025 at 3:07 AM, FACS_Youngmin LEE : now everything okay July 7, 2025 at 3:07 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 4:11 AM, Mohammad Amir : @FACS_Youngmin LEE Could you please check CNV031 is in Manual mode hence OOS. Thank you very much! July 7, 2025 at 4:18 AM, FACS_Youngmin LEE : no problem there July 7, 2025 at 4:19 AM, Mohammad Amir : Issue has been already solved at 4:13 ✅. The downtime was from 4:09-4:13. Thank you very much! July 7, 2025 at 4:24 AM, Maczó Anikó : Sziasztok 2f lift hiba July 7, 2025 at 4:39 AM, Édl Tamás : Kész July 7, 2025 at 4:40 AM, Maczó Anikó : Köszönöm July 7, 2025 at 4:56 AM, Maczó Anikó : Sziasztok 2f cv029 stop detect error July 7, 2025 at 5:12 AM, Csepi Árpád : Kész July 7, 2025 at 5:13 AM, Mohammad Amir : @Csepi Árpád Please check M1MFA300_P28 it is OoS that's why one job is pending for quite some time. Thank you very much! July 7, 2025 at 5:17 AM, FACS_Youngmin LEE : We are currently not producing line 1. July 7, 2025 at 5:17 AM, Mohammad Amir : Thank you very much for the confirmation. In this scenario I am cancelling the task. July 7, 2025 at 6:40 AM, András : Sziasztok 2F hármas lift előtti állomáson a paletta áll! A lift nem viszi tovább July 7, 2025 at 6:42 AM, Zoltán Harasztia FA : Mindjárt megyünk July 7, 2025 at 6:47 AM, FA CS AGV Jawad : Is someome checking Line 1 Raw Material CNV..? MOCNV023 July 7, 2025 at 6:52 AM, duzzaman Md (MCS) : @FA Please check M0STK035 Crane auto mode fork not home error. Thank you July 7, 2025 at 6:53 AM, duzzaman Md (MCS) : Also kindly check, MOSTK014_P07/08/09/10 ports are OOS. Thank you July 7, 2025 at 6:53 AM, Döme György F.A : Checking July 7, 2025 at 6:55 AM, Döme György F.A : The colleagues are on it. July 7, 2025 at 7:17 AM, 윤성제(Yoon SungJe) : @이민호 MINHO 안녕하세요 pm님 이른아침에 죄송합니다. 모듈4라인(2P18S-S) Lower case 자재가 없는데 언제 입고되는지 알 수 있을까요? July 7, 2025 at 7:19 AM, 이민호 MINHO : 자창 내에 보관 중인데 수입검사 완료 여부 확인해 보겠습니다 July 7, 2025 at 7:32 AM, 윤성제(Yoon SungJe) : @FA @MCS Hello, the materials are not coming to M3MFA300_P03. Can you check? July 7, 2025 at 7:32 AM, duzzaman Md (MCS) : @FA Kindly check M0STK014_C01 Crane carrier data lost Thank you July 7, 2025 at 7:35 AM, duzzaman Md (MCS) : It will come from M0STK011 which is currently OOS. July 7, 2025 at 7:54 AM, 이민영(Minyoung Lee) : 빠른 확인 부탁드려요 July 7, 2025 at 8:04 AM, Farkas Misi : Jó reggelt! M0CNV033 raktár meg állt. Rá tudnátok nézni? Köszönöm. July 7, 2025 at 8:06 AM, duzzaman Md (MCS) : @Döme György F.A Please check. Thank you! July 7, 2025 at 8:07 AM, duzzaman Md (MCS) : Also, Please check M0STK032_C01 there is CRANE Rack position not detect error. Thank you very much! July 7, 2025 at 8:20 AM, 윤성제(Yoon SungJe) : @MCS Please increase the priority of M3MFA300_P03 M4MFA300_P04 July 7, 2025 at 8:28 AM, duzzaman Md (MCS) : Done. Thank you July 7, 2025 at 8:30 AM, 윤성제(Yoon SungJe) : Thank you very much. July 7, 2025 at 8:32 AM, Roland : Hello. M0CNV022_M01, M02 M0CNV021_M01, M02 The sensors for these ports need adjust, because every other pallet gives an OverHang error. Please check it for us! Thank you July 7, 2025 at 8:32 AM, 윤성제(Yoon SungJe) : @배병민 (Bae Byoungmin) 안녕하세요 pm님 지금 모듈1,3,4라인 셀 공급이 안되고 있어서 곧 라인 정지 할 것 같은데 확인 해 주실수 있으실까요? July 7, 2025 at 8:37 AM, 송호석(Ho seok song) : @배병민 (Bae Byoungmin) 근래 들어 셀 공급 지연 이슈 잦은데요, 해당 부분 원인이 무엇일까요. 우선 현 상황부터 지급으로 처리 부탁드립니다. July 7, 2025 at 8:47 AM, 배병민 (Bae Byoungmin) : 죄송합니다 셀버퍼창고 에러 발생 조치지연 문제입니다 지금 저도 현장와서 조치중이여서 빠르게 해결한후 공유드리겠습니다 July 7, 2025 at 8:47 AM, 윤성제(Yoon SungJe) : @FA Module 1,3,4 line raw material in/out port door is closed. Can you check? The alarm seems to have closed the door. July 7, 2025 at 8:48 AM, Duna Don : There was a fire alarm, and we are currently addressing the situation. Thank you! July 7, 2025 at 8:49 AM, 이민호 MINHO : 1 팔렛은 수동 입고 처리하여 현재 라인 투입 중입니다. 늦게 입고된 점 죄송합니다, 차후 문제 없도록 진행하겠습니다 July 7, 2025 at 8:49 AM, 송호석(Ho seok song) : 네 피엠님 해당부분 신경 부탁드립니다. 감사합니다. July 7, 2025 at 8:52 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 GF M0CNV033_RTV01 알람없이 기동 정지 상태입니다 확인 부탁드립니다 July 7, 2025 at 8:52 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS North module dock GF M0CNV033_RTV01 It's on stay without alarm Please check July 7, 2025 at 8:54 AM, duzzaman Md (MCS) : RTV 01 error- RTV Carstopper down error time delay. Thank you! July 7, 2025 at 8:56 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés July 7, 2025 at 8:56 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS @배병민 (Bae Byoungmin) 모듈 도크장 RTV 조치가 1시간 이상 걸리고 있습니다. 모듈 출하제품 이관중이라 빠른 확인 부탁드립니다 July 7, 2025 at 8:57 AM, 배병민 (Bae Byoungmin) : 셀버퍼 창고 크레인은 정상화되었습니다. 순차적으로 반송중입니다 July 7, 2025 at 8:57 AM, duzzaman Md (MCS) : @Döme György F.A please check July 7, 2025 at 9:01 AM, FA CS AGV Jawad : There is alarm at End product warehouse, can someone plz check..." the other party is not responding" CV002, CV005 July 7, 2025 at 9:03 AM, duzzaman Md (MCS) : @FA M0cnv035_Rtv01 RTV car fiber communication error Thank you July 7, 2025 at 9:09 AM, FACS_오창훈_CHANGHOON : Solved July 7, 2025 at 9:11 AM, FACS_오창훈_CHANGHOON : The RTV is currently being moved to home position July 7, 2025 at 9:17 AM, Gábor Vercz : Sziasztok. Légyszíves nézzétek meg az OQC portot mert hibajelzés nincs de nem jön az AGV a palettákért. Kb 20 perce lettek vissza küldve. Köszönöm. July 7, 2025 at 9:19 AM, duzzaman Md (MCS) : Vehicle 11 will be there soon July 7, 2025 at 9:20 AM, Gábor Vercz : Köszönöm July 7, 2025 at 9:24 AM, FACS_JaewonShin : 남측 북측 출하 정상화 되었습니다 July 7, 2025 at 9:25 AM, 윤성제(Yoon SungJe) : @MCSHello, could you send this carrier back to the warehouse, PS22A-2507030078,M4MFA300_P19? The current location is on AGV2. July 7, 2025 at 9:30 AM, duzzaman Md (MCS) : Job created. It will ve back to STk. Thank you July 7, 2025 at 9:30 AM, 윤성제(Yoon SungJe) : @FA We are not supplying the module line empty dunnage pallet, please check it. July 7, 2025 at 9:30 AM, Sazzad Bhai SKon : Checking July 7, 2025 at 9:31 AM, Sazzad Bhai SKon : There are jobs for 3/4 line July 7, 2025 at 9:31 AM, 윤성제(Yoon SungJe) : Thank you very much. July 7, 2025 at 9:34 AM, 윤성제(Yoon SungJe) : Yes, I know, but U032670 is blocking the way. This is also empty dunnage pallet, but there are no jobs for this. July 7, 2025 at 9:34 AM, Sazzad Bhai SKon : Line 5, port 6 is oos. And U032670 is blocking the other Orde July 7, 2025 at 9:35 AM, Sazzad Bhai SKon : It has a job for 5 line . But 5 line is oos. So please make the port in service. Or MCS can return the pallet to STK July 7, 2025 at 9:36 AM, 윤성제(Yoon SungJe) : Module 5 line is not working. Can you send the carrier to M1MFA300_P06? July 7, 2025 at 9:36 AM, Sazzad Bhai SKon : This message was deleted. July 7, 2025 at 9:37 AM, Sazzad Bhai SKon : We'll delete from MCS and transfer back to warehouse. We don't send manual jobs to process machine July 7, 2025 at 9:38 AM, 윤성제(Yoon SungJe) : Yes, I see, and thank you so much. July 7, 2025 at 9:40 AM, Sazzad Bhai SKon : Transfer initiated, we'll keep monitoring this until you receive materials on 3/4 line July 7, 2025 at 9:48 AM, 윤성제(Yoon SungJe) : @MCS Sorry.. Can you send the carrier to the warehouse to PS22A-2507030077,M4MFA300_P19? July 7, 2025 at 9:52 AM, duzzaman Md (MCS) : Job started already. Thank you! July 7, 2025 at 10:01 AM, 윤성제(Yoon SungJe) : @MCSPlease make sure that JOB is not created at M4MFA300_P18,19. We already have a carrier here. July 7, 2025 at 10:04 AM, 윤성제(Yoon SungJe) : There is PS22A-2507030102 in M4MFA300_P19. Why does JON keep being created? May I know why? July 7, 2025 at 10:05 AM, Sazzad Bhai SKon : According to MCS p19 is empty, so another job created July 7, 2025 at 10:06 AM, duzzaman Md (MCS) : If you re-confirm, we'll update the location for this carrier. Then job won't get created. July 7, 2025 at 10:07 AM, 윤성제(Yoon SungJe) : Now I have restarted the facility. Is p19 still empty? July 7, 2025 at 10:08 AM, duzzaman Md (MCS) : Still empty in MCS July 7, 2025 at 10:08 AM, 윤성제(Yoon SungJe) : This carrier is still there. July 7, 2025 at 10:12 AM, duzzaman Md (MCS) : Location is updated for PS22A-2507030102 July 7, 2025 at 10:17 AM, 윤성제(Yoon SungJe) : Please send PS22A-2507030078 back to the warehouse. Please. July 7, 2025 at 10:26 AM, duzzaman Md (MCS) : Transfer initiated already. Thank you! July 7, 2025 at 10:46 AM, 송호석(Ho seok song) : 전라인 셀공급 지연 발생 중입니다 피엠님. July 7, 2025 at 11:28 AM, 배병민 (Bae Byoungmin) : 네 죄송합니다. 지금 정상적으로 반송되고있으며 잡이 많이 지연되고있어 정상화에 시간이 다소 소요되었습니다. 모니터링하면서 생산 차질없게 하겠습니다. July 7, 2025 at 1:12 PM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés July 7, 2025 at 1:21 PM, FACS_오창훈_CHANGHOON : Solved July 7, 2025 at 1:32 PM, 이민호 MINHO : @배병민 (Bae Byoungmin) @FACS_오창훈_CHANGHOON 지난 번에 요청한 overhang 에러 관련 BMA 자재 48 팔렛 입고 예정인데 입고 포트에서 센서 확인해 주실 수 있을까요? July 7, 2025 at 1:35 PM, FACS_오창훈_CHANGHOON : 지금 셀버퍼쪽 모니터링 중이라서 수동 입고 작업 상태 전부 모니터링 하기는 어려울 것 같고 에러 발생시 올려주시면 바로 확인하러 가겠습니다 July 7, 2025 at 1:36 PM, 이민호 MINHO : 네 감사합니다 July 7, 2025 at 1:39 PM, 배병민 (Bae Byoungmin) : @FACS_오창훈_CHANGHOON 매니져님 원자재 입고 포트 4군대 BMA 첫투입할때 센서 위치 다시 확인하여 동일 하게 조정 부탁드립니다 July 7, 2025 at 1:41 PM, 배병민 (Bae Byoungmin) : 현재 투입예정인 BMA 자재 기준으로 높이 센서에 감지되는지 확인 후 조정 해주시면 되겠습니다 July 7, 2025 at 1:43 PM, FACS_오창훈_CHANGHOON : 네 알겠습니다 July 7, 2025 at 2:57 PM, Farkas Kevin : Sziasztok, Modul 1. Emeleten a 6os sor végén 3db AGV inaktív állapotban ellehetetleníti a hozzáférést a lifthez. Kérlek nézzetek rá. Köszönöm July 7, 2025 at 2:59 PM, Duna Don : Checking July 7, 2025 at 3:05 PM, Farkas Kevin : They are not in the way anymore. Thank you. July 7, 2025 at 3:05 PM, FA CS AGV Jawad : Yes...AGV have been moved July 7, 2025 at 3:07 PM, duzzaman Md (MCS) : @FA KINDLY CHECK M0STK014_P01 Cv data missmatch error exists Thank you July 7, 2025 at 3:08 PM, Döme György F.A : Checking July 7, 2025 at 3:16 PM, Döme György F.A : Solved July 7, 2025 at 3:43 PM, duzzaman Md (MCS) : @FA Sziasztok CV022 pallet overhang det error Köszönöm July 7, 2025 at 3:45 PM, FACS_오창훈_CHANGHOON : Now testing July 7, 2025 at 4:48 PM, Korózs Péter Gábor : Sziasztok. 2. emelet, F6043 CV021 Light Curtain Error. July 7, 2025 at 4:49 PM, Zoltán Harasztia FA : Megyünk July 7, 2025 at 4:49 PM, Korózs Péter Gábor : Köszönöm July 7, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 7, 2025 at 6:40 PM, 승규 (BAEK SEUNGGYU) : @FA 금일 6시 40분부터 보충전 이관분 이동 작업 시작하려 합니다 AGV 정지 부탁드립니다 July 7, 2025 at 6:40 PM, FACS_Hyeongi Son : 넵 확인했습니다 July 7, 2025 at 9:03 PM, 승규 (BAEK SEUNGGYU) : @FA Many Dunnage moving from the module line to the warehouse are being delayed. Please check. July 7, 2025 at 9:04 PM, 승규 (BAEK SEUNGGYU) : M0STK037, 038 heading here. July 7, 2025 at 9:09 PM, VK (mcs) : @FA Please check 1F M0CNV035_P17-BP01 Work data error. July 7, 2025 at 9:10 PM, FACS_Hyeongi Son : Going July 7, 2025 at 9:13 PM, FACS_TaehyeongJin : @mcs The wrong AGV has the job Plz check AGV 02,13 in wait AGV July 7, 2025 at 9:13 PM, FACS_TaehyeongJin : Input wait July 7, 2025 at 9:16 PM, VK (mcs) : AGV 2 and 13 have destination to the line 3 and line 4 respectively. July 7, 2025 at 9:18 PM, VK (mcs) : Mentioned issue is in first floor conveyor, July 7, 2025 at 9:18 PM, FACS_Hyeongi Son : In action July 7, 2025 at 9:24 PM, FACS_Hyeongi Son : Solved July 8, 2025 at 12:34 AM July 8, 2025 at 12:34 AM, MCS/RTD System : @FA Please check 1F M0STK037_P12 It's out of service. July 8, 2025 at 12:35 AM, N.Gábor F.A. : Checking July 8, 2025 at 12:40 AM, FACS_Hyeongi Son : Solved July 8, 2025 at 3:45 AM, VK (mcs) : @FA Please check M0STK035 Crane fork right collapse detect 3 July 8, 2025 at 3:48 AM, Dávid F.A. : Solved! July 8, 2025 at 5:56 AM, 정연동 left this chatroom. July 8, 2025 at 6:08 AM, Korózs Péter Gábor : Sziasztok! 2. emelet, CV021 Light Curtain Error July 8, 2025 at 6:09 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Skwarek Tibor ———————————— Assembly 1F(2) Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 8, 2025 at 6:10 AM, Döme György F.A : Megyek July 8, 2025 at 6:11 AM, Korózs Péter Gábor : Köszi July 8, 2025 at 6:17 AM, FA/CS/AGV_ Asjad : @mcs Could you please send Pallet ID: T705198 (AGV 18) to EOL 1,2,3. Its at EOL 6 currently. Thank you! July 8, 2025 at 6:21 AM, Shakir (MCS) : I will transfer it warehouse, and make new order. Thanks July 8, 2025 at 6:25 AM, Shakir (MCS) : Job initiated to its source and AGV departed ✅ Thank uou July 8, 2025 at 6:31 AM, FA/CS/AGV_ Asjad : @MCS Again Pallet ID:T702641 (VC 10), send it to warehouse please. Thank you! July 8, 2025 at 6:32 AM, Shakir (MCS) : Working on it Thank you July 8, 2025 at 6:33 AM, Shakir (MCS) : Job initiated to its source and AGV departed ✅ Thank you July 8, 2025 at 6:44 AM, FA/CS/AGV_ Asjad : Thank you, For EOL 6, it should be an S-type pallet instead of a T-type, as per the line members. July 8, 2025 at 6:51 AM, Shakir (MCS) : According to RTD only S type pallets available for EOL6 line. Checking further thanks July 8, 2025 at 6:55 AM, Shakir (MCS) : Now S type job assinged to 6 line July 8, 2025 at 6:55 AM, FA/CS/AGV_ Asjad : Yes, S-type pallets should be delivered , previously, T-type pallets were arriving. Thank you July 8, 2025 at 6:57 AM, Shakir (MCS) : From STK13 S Type pallet job assigned to EOL line 6 currently STK13 OOS. @FA please check M0STK013 Thank you July 8, 2025 at 6:59 AM, FA/CS/AGV_ Asjad : Solved July 8, 2025 at 7:17 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés July 8, 2025 at 7:17 AM, Tóth Gyula : MOSTK035 C01 error July 8, 2025 at 7:17 AM, Döme György F.A : Megyünk July 8, 2025 at 7:31 AM, Döme György F.A : Kész July 8, 2025 at 9:43 AM, FACS_Wooseok Choi : @Fa someone come STK28 pls, mc is down. Mc is no way to press alone. July 8, 2025 at 9:44 AM, Zoltán Harasztia FA : Cheking July 8, 2025 at 10:28 AM, Shakir (MCS) : @FA Please check M0STK021_C01 is OOS, having Crane W/T In Abort error. Thank you! July 8, 2025 at 10:29 AM, Döme György F.A : Checking July 8, 2025 at 10:35 AM, Döme György F.A : Done July 8, 2025 at 1:51 PM, 승규 (BAEK SEUNGGYU) : @FA M3MFA300_P03 Cell warehousing is being delayed. Please check. ID:T703498 July 8, 2025 at 2:35 PM, Döme György F.A : The 9th AGV is currently delivering the material to line 3. July 8, 2025 at 2:45 PM, Döme György F.A : The next pallet is also arriving soon; it is on AGV 6. July 8, 2025 at 3:26 PM, Roland : Hello M0CNV021 - CV028 Stop detect error! Megtudjatok nezni, legyszives? Koszonom July 8, 2025 at 3:27 PM, Zoltán Harasztia FA : Megyünk July 8, 2025 at 5:53 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(1): Novák Károly Elektróda:(2) Oláh András, Szabadi Miklós, Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 8, 2025 at 7:36 PM, Mohammad Amir : Good evening @All, For your information:- There is a fire sensor abnormal error in STK014 and it is delaying cell pallet module line -3 tasks. ✅ Thank you very much! July 8, 2025 at 7:53 PM, Mohammad Amir : Dear @All, Issue has been resolved now ✅ Now,AGV#6 on the way with cell pallet to module line-3. Thank you very much! July 8, 2025 at 10:12 PM, Nemes Patrik : 2F CV025 work data error and Rtv car sensor delay July 9, 2025 at 2:25 AM July 9, 2025 at 2:25 AM, Mohammad Amir : @Dávid F.A. Please check CNV032_P02 there is AGV interface Error it is blocking some jobs. Thank you very much! July 9, 2025 at 2:26 AM, Dániel Hufnágel : Fire alarm at modul area, please be patient! July 9, 2025 at 2:26 AM, N.Gábor F.A. : There is currently a fire alarm in the area, so please be patient. July 9, 2025 at 2:26 AM, Mohammad Amir : @FA Please check CNV036_RTV01 there is car distance error. Thank you very much! July 9, 2025 at 2:27 AM, Mohammad Amir : Thank you very much for the updates. July 9, 2025 at 2:57 AM, FACS_Hyeongi Son : @all If there are firefighters around, please tell them to solve the fire shutter in the 1F M0CNV035 area July 9, 2025 at 2:59 AM, Dániel Hufnágel : I will go there! July 9, 2025 at 2:59 AM, FACS_Hyeongi Son : Thank you 👍 July 9, 2025 at 5:07 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Could you please come to end product area?? July 9, 2025 at 5:07 AM, N.Gábor F.A. : Sure July 9, 2025 at 6:21 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.09. 8+1/12+1 Tech, 0Sl, 1Sup. Overtime(0): Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(1): Pintye Miklós Shift Change(0): --------------- Electrode(3): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, --------------- Assy GF (2): Kovács Ágnes, CsanálosiGábor, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Takács Ádám --------------- Form/Modul(1): Gerbovits Ke July 9, 2025 at 6:56 AM, Niki (Modul) : @Gerbovits Kevin 2.elemet lift error July 9, 2025 at 6:57 AM, Gerbovits Kevin : Megyek July 9, 2025 at 6:59 AM, Horváth Adriàn : @Boromisza Zoltán @Denkó Jani (F.A.) 3-4 között alapanyag raktàr megàllt. Elakadt a liftnél a paletta. Check pls. July 9, 2025 at 7:00 AM, Csanálosi Gábor FA : Csak a @Gerbovits Kevin van ma. July 9, 2025 at 7:02 AM, Horváth Adriàn : Akkor @Gerbovits Kevin 😁megkéne menteni hazàt. July 9, 2025 at 7:02 AM, Gerbovits Kevin : Megyek July 9, 2025 at 7:17 AM, Gerbovits Kevin : Kész July 9, 2025 at 7:18 AM, Gerbovits Kevin : Kész July 9, 2025 at 7:28 AM, Horváth Adriàn : Line 3 AGV megàllt a port alatt. Check pls July 9, 2025 at 7:28 AM, FA CS AGV Jawad : I check it July 9, 2025 at 7:40 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés July 9, 2025 at 7:40 AM, Gerbovits Kevin : Megyek July 9, 2025 at 7:45 AM, FA CS AGV Jawad : Solved July 9, 2025 at 7:49 AM, Gerbovits Kevin : Kész July 9, 2025 at 8:55 AM, FACS_Wooseok Choi : @Gerbovits Kevin do u find any spare parts? July 9, 2025 at 9:06 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 1F M0CNV033_P14 port 알람없이 기동 정지 상태입니다 확인 부탁드립니다 July 9, 2025 at 9:08 AM, Shakir (MCS) : @FA please check STK33_P14 OOS, carrier waiting. July 9, 2025 at 9:08 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 1F M0CNV033_P14 port It's on stay without alarm Please check July 9, 2025 at 9:10 AM, FACS_Wooseok Choi : 넵 알겠습니다. July 9, 2025 at 9:19 AM, SKOH2/제조-셀,모듈 출하/김병호 : 조치가 오래 걸리실까요?? 38bank에서 넘어오는 제품인데 1시간전에 반송 명령 내린건데 아직도 나오지 않고 있어서요 츌하 작업 중이라 빠른 확인 부탁드립니다 July 9, 2025 at 9:21 AM, FACS_Wooseok Choi : 33으로 가는 제품들 1F 34에서 에러로 못 가고있었습니다 July 9, 2025 at 9:21 AM, FACS_Wooseok Choi : 북측으로 이동하여 모니터링 하겠습니다 July 9, 2025 at 10:07 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés July 9, 2025 at 10:07 AM, Niki (Modul) : @Gerbovits Kevin 3as gép fóliával gond van. July 9, 2025 at 10:08 AM, Gerbovits Kevin : Megyek July 9, 2025 at 10:08 AM, Gerbovits Kevin : Megyek July 9, 2025 at 10:34 AM, Shakir (MCS) : @FA Please check M0STK035, Crane is not moving, Jobs are pending Thank you July 9, 2025 at 10:36 AM, Shakir (MCS) : @FA Please check M0STK037_C01: MCP 1F OP1 Light curtain detect error Thank you July 9, 2025 at 10:40 AM, Duna Don : Solved! July 9, 2025 at 10:41 AM, Shakir (MCS) : Thank you July 9, 2025 at 10:41 AM, FACS_Wooseok Choi : Someone pls come to m0stk37, smc down. I can't push two button. July 9, 2025 at 10:44 AM, FACS_Bareum kim : 제가 갈께요 July 9, 2025 at 10:45 AM, FACS_Wooseok Choi : 조치완료했습니다 July 9, 2025 at 10:47 AM, FACS_Wooseok Choi : This message was deleted. July 9, 2025 at 10:47 AM, Shakir (MCS) : I think crane still not moving July 9, 2025 at 10:48 AM, FACS_Wooseok Choi : Cheaking July 9, 2025 at 10:54 AM, FACS_Wooseok Choi : The banding strap is loose. July 9, 2025 at 11:04 AM, FACS_Wooseok Choi : Still it is not move. So mumual mode use it. July 9, 2025 at 11:05 AM, Gerbovits Kevin : Kész July 9, 2025 at 12:08 PM, Shakir (MCS) : @FA Please check M0CNV023_34_031, stop detect error. Thank you July 9, 2025 at 12:10 PM, Shakir (MCS) : @Fa Please check M0STK034_P11 DIV pallet detect. Thank you July 9, 2025 at 12:16 PM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés 34-es daru July 9, 2025 at 12:39 PM, FACS_Wooseok Choi : @Shakir (MCS) solved, thank u for information. if any problem ocuur, inform me. Thank u. July 9, 2025 at 12:40 PM, Shakir (MCS) : Sure ✅ July 9, 2025 at 12:57 PM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés 35-ös daru inaktív July 9, 2025 at 12:58 PM, FACS_Wooseok Choi : Cheaking July 9, 2025 at 1:01 PM, Shakir (MCS) : @FACS_Wooseok Choi Is there any maintenance going on STK35, 10+ jobs delayed by 1+ hours. Thank you July 9, 2025 at 1:03 PM, 배병민 (Bae Byoungmin) : 35번크레인 이때 조치된건가요? July 9, 2025 at 1:05 PM, Shakir (MCS) : @FA Please check M0STK025_C01, Crane fork right wide error. Thank you July 9, 2025 at 1:06 PM, FACS_Wooseok Choi : 그 때 라이트커튼 쳐서 알람 울리고 조치 후 기동 확인 했습니다 July 9, 2025 at 1:10 PM, Horváth Adriàn : @Gerbovits Kevin line 4 also burkolat gantrytől nem viszi el az üres làdàkat és nem hoz telit. Nézz rà. Megàllt a sor miatta. July 9, 2025 at 1:13 PM, Gerbovits Kevin : Megyek nemsokára July 9, 2025 at 1:17 PM, 배병민 (Bae Byoungmin) : Once the PLT has been shipped to Cellbuffer Warehouse Port #2, it will be returned to AGV#3 soon. July 9, 2025 at 1:26 PM, MCS/RTD System : @FA Still out of service, Thanks July 9, 2025 at 1:26 PM, Horváth Adriàn : Solved😎 July 9, 2025 at 1:37 PM, Roland : Sziasztok! M0STK025 - Crane fork right detect error! Megtudjatok nezni, kerlek? Koszonom July 9, 2025 at 1:41 PM, Shakir (MCS) : Now M0STK035 crane moving and delivering carriers ✅ Thank you July 9, 2025 at 1:41 PM, Duna Don : @Shakir (MCS) Could you please send the following AGVs back to their source ports? * AGV#8, Pallet ID: Z102932 * AGV#7, Pallet ID: S001604 Thank you! July 9, 2025 at 1:42 PM, Shakir (MCS) : Sure, working on it Thank you July 9, 2025 at 1:46 PM, Shakir (MCS) : Could you please cancel the job from ACS first. Still AGV having jobs. July 9, 2025 at 1:46 PM, Duna Don : Sure I am on it. Thanks July 9, 2025 at 1:46 PM, Duna Don : Done ✅ July 9, 2025 at 1:50 PM, Shakir (MCS) : Now * AGV#8, Pallet ID: Z102932 * AGV#7, Pallet ID: S001604 On the way to its source warehouse ✅ Thank you July 9, 2025 at 1:51 PM, Duna Don : Thank you bhai July 9, 2025 at 2:20 PM, FACS_Wooseok Choi : We need to replace the sencer stk25 and need some more time. Thank you. July 9, 2025 at 2:28 PM, Roland : Can you delete all jobs from M0STK025, please? Thank you July 9, 2025 at 2:29 PM, Shakir (MCS) : Working on it July 9, 2025 at 2:29 PM, Sazzad Bhai SKon : Reason please? July 9, 2025 at 2:30 PM, Roland : Because those pallets for truck but its take too much time to fix it, I send truck away, so dont need it July 9, 2025 at 2:34 PM, Shakir (MCS) : This message was deleted. July 9, 2025 at 2:34 PM, Shakir (MCS) : All the job from M0STK025 which is inside STK has been cancelled ✅. Thank you July 9, 2025 at 2:35 PM, FACS_Wooseok Choi : I delate a job, and install it. Id is ps22a-2507091422271, position is 0201202. Thank you July 9, 2025 at 2:39 PM, Shakir (MCS) : Working on it July 9, 2025 at 2:45 PM, Shakir (MCS) : Yes, there is no job and installed at 14:33 ✅ July 9, 2025 at 3:19 PM, Niki (Modul) : @Gerbovits Kevin hátsó raktába nem megy be az anyag July 9, 2025 at 3:19 PM, Gerbovits Kevin : Megyek July 9, 2025 at 3:26 PM, Shakir (MCS) : @FA Please check M0STK033_C01 there is Crane SRC Disconnected Error. Thank you ! July 9, 2025 at 3:27 PM, FACS_Wooseok Choi : Cheaking July 9, 2025 at 3:37 PM, FACS_Wooseok Choi : removing the fork, the mc went off without any other errors. Stk33 working now. Thank you July 9, 2025 at 3:38 PM, Gerbovits Kevin : This message was deleted. July 9, 2025 at 3:38 PM, Gerbovits Kevin : Kész July 9, 2025 at 3:45 PM, 유주환(Yoo Joohwan) : @FA 8라인 로어 언로딩 설비 확인 부탁 드립니다 July 9, 2025 at 4:37 PM, Shakir (MCS) : @Fa Please check M0CNV023_P21 conveyor run time error. Thank you July 9, 2025 at 4:37 PM, Gerbovits Kevin : Going July 9, 2025 at 4:53 PM, Gerbovits Kevin : Solved July 9, 2025 at 5:54 PM, Mohammad Amir : Good evening @FA, Please check Z103572 it is located at CNV036_P13 it is not moving for quite some time. Everything is good from MCS RTD side ✅. Please check physically(Ex.Plate position)on priority. Thank you very much! July 9, 2025 at 5:58 PM, Sánta László : Hi all, The empty dunnage hasn’t arrived at Line 1. The line is already down because of it. Please check what the cause might be and let us know how long it will take to get here. Thank you! July 9, 2025 at 5:58 PM, Mohammad Amir : Good evening, Sure checking! July 9, 2025 at 5:58 PM, 승규 (BAEK SEUNGGYU) : It is being delayed due to the transfer of supplementary warfare. It will take about 10 minutes. July 9, 2025 at 6:02 PM, Mohammad Amir : Good evening, Issue has been resolved now ✅ Now empty dunnage in the way to Line -1 module. I am monitoring. Thank you very much! July 9, 2025 at 6:03 PM, Sánta László : Thank you! July 9, 2025 at 6:03 PM, Mohammad Amir : You are welcome! July 9, 2025 at 6:05 PM, FACS_TaehyeongJin : Solved July 9, 2025 at 6:06 PM, Mohammad Amir : Thank you very much! Carrier has started to move ✅. July 9, 2025 at 6:08 PM, Mohammad Amir : Please feel free to contact me immediately if you face production delay due to shortages of dunnage again. I will prioritize the dunnage supply to line -1. Thank you very much! July 9, 2025 at 6:11 PM, Sánta László : Thank you very much for your support! We will contact you immediately if the issue happens again. July 9, 2025 at 6:11 PM, Mohammad Amir : You are most welcome! July 9, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Sarvajcz Ferenc Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— July 9, 2025 at 7:32 PM, Maczó Anikó : Sziasztok 2f 3 gépnél conveyor slow error July 9, 2025 at 7:40 PM, Mohammad Amir : @FA @Csepi Árpád Good evening, Please check CNV033_RTV01 there is car stopper error and it is blocking several jobs. Thank you very much! July 9, 2025 at 7:43 PM, Szabolcs : @FA M0CNV033_RTV01 problem. Check please. July 9, 2025 at 7:43 PM, FACS_Hyeongi Son : Going July 9, 2025 at 7:44 PM, FACS_Hyeongi Son : Solved July 9, 2025 at 7:44 PM, FACS_Hyeongi Son : Checking July 9, 2025 at 7:52 PM, FACS_Hyeongi Son : Solved July 9, 2025 at 7:52 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 8:25 PM, Maczó Anikó : Sziasztok 2f 3 gépnél cv31 stop detect error July 9, 2025 at 8:25 PM, Maczó Anikó : Thank you July 9, 2025 at 8:35 PM, FACS_Hyeongi Son : Solved July 9, 2025 at 8:42 PM, Maczó Anikó : Thank you July 9, 2025 at 10:11 PM, Alexandra : 2f in lift conveyor det error July 9, 2025 at 10:12 PM, Mohammad Amir : @FA Please check CNV031_RTV01 there is Interface Error and it is delaying the tasks. Thank you very much! July 9, 2025 at 10:15 PM, FACS_Hyeongi Son : @Alexandra @Maczó Anikó Going When you make a request, please tag @FA July 9, 2025 at 10:16 PM, FACS_TaehyeongJin : Solved July 9, 2025 at 10:35 PM, Mohammad Amir : Dear @All, For your information:- Due to issue in M0CNV031 ,there is a delay in dunnage delivery to Module line-1 &3&4 . I have already informed the FA regarding the issue,they are working on it. Sorry for the inconvenience. I am monitoring. Thank you very much! July 9, 2025 at 10:36 PM, Sánta László : Thank you for the information! July 9, 2025 at 10:36 PM, Mohammad Amir : You are most welcome! July 9, 2025 at 10:41 PM, FACS_TaehyeongJin : Solved July 9, 2025 at 10:42 PM, Mohammad Amir : Dear @All, Update:- Issue with CNV031 has been resolved ✅. Now AGV#2 on the way with Dunnage to Module line -1 and for line -3&4 ,dunnage also on the way. Thank you very much! July 9, 2025 at 10:42 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 10:52 PM, Sánta László : Thank you, the empty dunnage has arrived! July 9, 2025 at 10:52 PM, Mohammad Amir : You are most welcome! July 10, 2025 at 12:40 AM July 10, 2025 at 12:40 AM, Maczó Anikó : Sziasztok 2f @Fa 84021 raktárba nem megy be az anyag . July 10, 2025 at 12:40 AM, Mohammad Amir : Checking July 10, 2025 at 12:42 AM, Maczó Anikó : Be ment az anyag . July 10, 2025 at 12:42 AM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! July 10, 2025 at 1:44 AM, Mohammad Amir : @FA Please check STK028_C01 there is Light curtain error. Thank you very much! July 10, 2025 at 2:04 AM, Mohammad Amir : @FA Please check STK028_C01 there is Light curtain error. Thank you very much! July 10, 2025 at 2:04 AM, FACS_Hyeongi Son : Yes we’re checking now July 10, 2025 at 2:04 AM, Mohammad Amir : Thank you very much for the confirmation! July 10, 2025 at 2:23 AM, FACS_Hyeongi Son : Solved July 10, 2025 at 2:24 AM, FACS_Hyeongi Son : The reason is that the attached barcode of the paret was not properly attached, so the light curtain was detected and the safety was activated July 10, 2025 at 2:24 AM, Mohammad Amir : Thank you very much for sharing. July 10, 2025 at 2:36 AM, Édl Tamás : I will be shutting down the STK035 crane at 03:00 for planned maintenance (PM), expected to last 20-25 minutes. July 10, 2025 at 3:34 AM, Édl Tamás : The inspection of crane 35 has been completed. The crane is operational again. July 10, 2025 at 6:09 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.10. 9+0/12+1 Tech, 0Sl, 1Sup. Overtime(1): Harasztia Zoltán Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(0): Shift Change(0): --------------- Electrode(4): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, TakácsÁdám, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Pintye Miklós --------------- Form/Modul( July 10, 2025 at 11:28 AM, duzzaman Md (MCS) : @FA Please check M0STK021 Crane fork right collapse detect 3 Thank you July 10, 2025 at 11:28 AM, Zoltán Harasztia FA : Cheking July 10, 2025 at 12:41 PM, Hódi Attila : Szükség lenne FAra az L1-en July 10, 2025 at 12:41 PM, Zoltán Harasztia FA : Megyünk July 10, 2025 at 1:00 PM, Horváth Adriàn : Sziasztok. Földszint 3-4 közt alapanyag raki nem viszi el az üres cumókat. Nézzetek rà. July 10, 2025 at 1:01 PM, Zoltán Harasztia FA : Nézzük July 10, 2025 at 1:30 PM, Bozó Gyula : Sziasztok!! Szeretnék segítséget kérni az OQC porthoz! Köszönöm! July 10, 2025 at 1:31 PM, Zoltán Harasztia FA : Megyünk July 10, 2025 at 1:31 PM, Zoltán Harasztia FA : Itt vagyok July 10, 2025 at 2:01 PM, Niki (Modul) : @Zoltán Harasztia FA 1es gépnél az anyag fóliázas után keresztbe állt! July 10, 2025 at 2:01 PM, Zoltán Harasztia FA : Megyünk July 10, 2025 at 2:01 PM, Zoltán Harasztia FA : Megyünk July 10, 2025 at 2:36 PM, Kurkó Péter : Hello valaki nézzen rá az 1line alapanyag raktárra köszi July 10, 2025 at 2:36 PM, Zoltán Harasztia FA : Megyünk July 10, 2025 at 2:40 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 7.10 2.Machine name : - M0CNV36 3. Action detail : - RTV parameter test 4.Work time -Start : 14:30 -End : 5. Remark(specialote) : -x July 10, 2025 at 2:44 PM, Roland : Sziasztok M0STK021 conveyorba beszorult az anyag, nincs hiba. Megtudjatok nezni kerlek? July 10, 2025 at 2:45 PM, Zoltán Harasztia FA : Már itt vagyunk July 10, 2025 at 2:46 PM, Kurkó Péter : Hello line 1 végén nem viszi el az agv a teli dunnaget valaki nézze meg köszi July 10, 2025 at 2:47 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 7.10 2.Machine name : - M0CNV36 3. Action detail : - RTV parameter test 4.Work time -Start : 14:30 -End : 14:45 5. Remark(specialote) : -x July 10, 2025 at 2:48 PM, Horváth Adriàn : Solved🫣 July 10, 2025 at 2:49 PM, Zoltán Harasztia FA : Kész July 10, 2025 at 3:29 PM, duzzaman Md (MCS) : @FA Please check M0STK035_P14 there is Work Data Error. Thank you July 10, 2025 at 3:30 PM, Gerbovits Kevin : Working July 10, 2025 at 3:31 PM, Gerbovits Kevin : Solved July 10, 2025 at 4:18 PM, Kurkó Péter : Hello line1en a 2 agv megállt a bma port alatt valaki nézzen rá köszi July 10, 2025 at 4:18 PM, FA/CS/AGV_ Asjad : Coming July 10, 2025 at 4:21 PM, FA/CS/AGV_ Asjad : Solved July 10, 2025 at 5:55 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 GF M0CNV033_M02 carrier id : U033728 목적지 설정이 되지 않아 입고가 되지 않고 있습니다. 확인 부탁드립니다. July 10, 2025 at 5:56 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS North module dock GF M0CNV033_M02 carrier id : U033728 Destinations are not made. I want you to put the product in manually. July 10, 2025 at 6:01 PM, VK (mcs) : Is it U033729? July 10, 2025 at 6:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : yes.. July 10, 2025 at 6:05 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS North module dock GF M0CNV033_M02 carrier id : U033729 Destinations are not made. I want you to put the product in manually. July 10, 2025 at 6:06 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 북측 모듈 도크 GF M0CNV033_M02 carrier id : U033729 목적지 설정이 되지 않아 입고가 되지 않고 있습니다. 확인 부탁드립니다. July 10, 2025 at 6:07 PM, VK (mcs) : Transport job created July 10, 2025 at 7:52 PM, VK (mcs) : @FA Please check M0STK033 MCP 1F OP1 light curtain detect error. July 10, 2025 at 8:09 PM, Édl Tamás : Solved July 10, 2025 at 8:45 PM, VK (mcs) : @FA Please check M0STK035 Crane fork left collapse detect 4 July 10, 2025 at 8:54 PM, Magosi Erik : @VK (mcs) Good evening Sir. Can You check M4MFA300 P32 material for me please? We made a LR for FR capsule but its still not coming. Thank You July 10, 2025 at 8:57 PM, VK (mcs) : Checking July 10, 2025 at 9:01 PM, VK (mcs) : @FA Please check M0STK021 PS210-2507010006 has transfer job to line 4 module assembly but it is not transferring. July 10, 2025 at 9:08 PM, FACS_Youngmin LEE : solved it will be go to there transferring now July 10, 2025 at 9:09 PM, Magosi Erik : Thank You Everyone July 10, 2025 at 9:13 PM, Alexandra : @FA 2f cv 036 stop detect error, product detect error July 10, 2025 at 9:34 PM, Édl Tamás : Kész July 10, 2025 at 9:53 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 21:52 -End : 5. Remark(special note) : - July 10, 2025 at 10:02 PM, FACS_Youngmin LEE : This message was deleted. July 10, 2025 at 10:03 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 21:52 -End : 22:01 5. Remark(special note) : - 1열 2행 6단 조치:플러그 탈거 후 재연결 결과:EMS 컨트롤 시스템 화면 정상 July 10, 2025 at 10:07 PM, FACS_Youngmin LEE : ■화재 오알람으로 인한 에러발생 July 10, 2025 at 10:36 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -GF EOL LINE 3. Action detail : -현재 GF EOL라인 ACS PLC가 디스커넥티드 상태로 AGV통신불가 합니다. 원인 찾고 있습니다. 지게차 수동투입 바랍니다. 4.Work time -Start : 22:36 -End : 5. Remark(special note) : - July 10, 2025 at 10:53 PM, Alexandra : @FA 2. emeleten a raktárnál hiba van, az anyagok nem mennek be a raktárba. July 10, 2025 at 11:05 PM, VK (mcs) : @FA Please check M0STK021-P22 Carrier is not transferring to the STK. July 10, 2025 at 11:07 PM, FACS_Youngmin LEE : solved July 10, 2025 at 11:14 PM, Csepi Árpád : Kész July 10, 2025 at 11:15 PM, Csepi Árpád : Solved July 10, 2025 at 11:30 PM, FACS_Youngmin LEE : This message was deleted. July 11, 2025 at 4:06 AM July 11, 2025 at 4:06 AM, FA/CS/AGV/Taimur : @VK (mcs) Can you please sent carrier: U032877 on AGV: 13 U032886 on AGV: 11 In GF END product back to STK. The production is on pause for both Line 1 and line 4 and we need to recover AGV. Thank you July 11, 2025 at 4:09 AM, MCS/RTD System : Transport command created July 11, 2025 at 6:09 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés Elakadt a liftnèl a paletta... July 11, 2025 at 6:10 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 11, 2025 at 6:43 AM, Farkas Misi : Jó reggelt! M0CNV033 raktár meg állt légyszives nézzétek meg. Köszönöm. July 11, 2025 at 6:54 AM, Döme György F.A : Megyek July 11, 2025 at 7:11 AM, Shakir (MCS) : @FA Please check M0STK 023_C01 MCP 2F OP1 light curtain detect error. Thank you July 11, 2025 at 7:12 AM, Shakir (MCS) : @FA Please check M0CNV023_83_019 stop detect error. Thank you July 11, 2025 at 7:13 AM, Döme György F.A : I'm working on it. July 11, 2025 at 7:19 AM, Döme György F.A : All done July 11, 2025 at 7:19 AM, Shakir (MCS) : Thank you July 11, 2025 at 9:12 AM, András : 2f conveyor det error July 11, 2025 at 9:15 AM, Döme György F.A : Megyünk July 11, 2025 at 9:24 AM, Farkas Misi : Sziasztok. M0CNV033 raktár meg állt légyszives nézzétek meg. Köszönöm. July 11, 2025 at 9:25 AM, Döme György F.A : Amint tudunk megyünk July 11, 2025 at 9:26 AM, Farkas Misi : Rendben! Köszönöm July 11, 2025 at 9:41 AM, FA/CS/AGV_ Asjad : @FA Please check M0STK014 - crane double cargo error. Thank you! July 11, 2025 at 9:48 AM, Döme György F.A : Checking July 11, 2025 at 9:59 AM, 윤성제(Yoon SungJe) : @FA Hello, the supply of module 1, 3, and 4 lines is being delayed, is there a problem? Please check it. July 11, 2025 at 9:59 AM, Shakir (MCS) : Checking July 11, 2025 at 10:01 AM, 윤성제(Yoon SungJe) : All jobs are supposed to come from M0STK12 only. July 11, 2025 at 10:02 AM, Shakir (MCS) : Yes There is too many jobs assigned from STK12 July 11, 2025 at 10:05 AM, Shakir (MCS) : 2 job for line 1 and 4 and 1 job for line 3 are queued. July 11, 2025 at 10:05 AM, 윤성제(Yoon SungJe) : Is the JOB created only at M0STK12 due to the M0STK14 problem? July 11, 2025 at 10:08 AM, Shakir (MCS) : From 9:16-9:49 STK14 was OOS, due to this problem job created from STK12. July 11, 2025 at 10:10 AM, 윤성제(Yoon SungJe) : Thank you so much for checking. I am monitoring. I will tell you again if there is a problem. July 11, 2025 at 10:12 AM, Shakir (MCS) : Sure, Thank you July 11, 2025 at 10:24 AM, 윤성제(Yoon SungJe) : @FA Please check M0STK12. Double cargo error July 11, 2025 at 10:24 AM, Zoltán Harasztia FA : Cheking July 11, 2025 at 10:29 AM, Zoltán Harasztia FA : Solved July 11, 2025 at 11:47 AM, Shakir (MCS) : @FA Please check M0STK021_C01 is OOS, having Crane W/T In Abort error. Thank you! July 11, 2025 at 11:47 AM, Zoltán Harasztia FA : Cheking July 11, 2025 at 11:55 AM, Döme György F.A : Done July 11, 2025 at 2:36 PM, Roland : Sziasztok! M0CNV022_M02-es port elromlott, folyamatosan OverHang-et dob ki, valszeg a szenzor elmozdult vagy valami. Megtudjatok nezni kerlek? Koszonom! July 11, 2025 at 2:36 PM, Zoltán Harasztia FA : Megyünk July 11, 2025 at 4:01 PM, Korózs Péter Gábor : Sziasztok! 2F F6043 CV021 Light Curtain Error July 11, 2025 at 4:02 PM, Zoltán Harasztia FA : Nézzük July 11, 2025 at 4:02 PM, Korózs Péter Gábor : Köszi July 11, 2025 at 4:08 PM, Shakir (MCS) : @FA Please check M0STK023_C01, Crane fork left wide1 error. Thank you July 11, 2025 at 4:08 PM, Zoltán Harasztia FA : Cheking July 11, 2025 at 4:26 PM, Döme György F.A : Solved July 11, 2025 at 4:35 PM, 승규 (BAEK SEUNGGYU) : @FA Please check M0STK027. Materials are not coming from here. July 11, 2025 at 4:35 PM, Zoltán Harasztia FA : Cheking July 11, 2025 at 4:37 PM, Zoltán Harasztia FA : Warehouse 27 is already working. July 11, 2025 at 4:39 PM, 승규 (BAEK SEUNGGYU) : M0STK027_P02 I think there's a delay here. July 11, 2025 at 4:45 PM, Shakir (MCS) : M0STK027_P02 working normally, Pallets are going inside STK easily without delay. Thank you July 11, 2025 at 4:46 PM, Döme György F.A : The material had to be unloaded manually from the crane. After that, the remaining tasks were carried out automatically. July 11, 2025 at 4:47 PM, 승규 (BAEK SEUNGGYU) : Thank you. I'll be waiting for you. July 11, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0):- Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 11, 2025 at 7:39 PM, 승규 (BAEK SEUNGGYU) : @FA The cell coming out of M0STK012 is being delayed. M1MFA300_P01. T705208 M1MAF300_P03. T705209 M3MFA300_P03 T703901 Please check it. July 11, 2025 at 7:45 PM, N.Gábor F.A. : I raised the priority, the warehouse will start working on the aforementioned materials first. July 11, 2025 at 11:35 PM, VK (mcs) : @FA Please check M0STK023 MCP 2F OP1 light curtain detect error. July 11, 2025 at 11:35 PM, N.Gábor F.A. : We're on our way Thank you July 12, 2025 at 3:03 AM July 12, 2025 at 3:03 AM, FA/CS/AGV/Taimur : @VK (mcs) can you please sent carrier: U033168 on AGV: 10 back to stk. The prod. Is on pause in GF END Product LINE: 04z July 12, 2025 at 3:05 AM, VK (mcs) : Done July 12, 2025 at 6:01 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(3) Gégény Dávid Győri József Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 12, 2025 at 9:41 AM, András : GF Stop time over July 12, 2025 at 9:42 AM, Zoltán Harasztia FA : Megyek July 12, 2025 at 9:44 AM, Zoltán Harasztia FA : Kész July 12, 2025 at 9:44 AM, András : Köszi 😉 July 12, 2025 at 6:06 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (0): - Holiday (1): Kovács Szabolcs Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(4): GF: Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 12, 2025 at 7:27 PM, Mohammad Amir : @FA @Dávid F.A. Good evening, Please check STK028_C01 there is Carne right wide #1 check error and it is blocking job for module line -4 BMA. Thank you very much! July 12, 2025 at 7:28 PM, Dávid F.A. : Have a nice evening! I'll check! July 12, 2025 at 7:46 PM, Dávid F.A. : The warehouse is ready for operation! Thank you for letting me know! July 12, 2025 at 7:46 PM, Mohammad Amir : Thank you very much! July 13, 2025 at 12:16 AM July 13, 2025 at 12:16 AM, Mohammad Amir : @Dávid F.A. Please check STK023_C01 there is Light curtain error. Thank you very much! July 13, 2025 at 1:16 AM, duzzaman Md (MCS) : @FA Please check M0STK032_C01 Crane fork right collapse detect 1 Thank you July 13, 2025 at 1:24 AM, Dávid F.A. : I would like to ask for information! Is U033432 an empty or full pallet?! July 13, 2025 at 1:24 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 1:25 AM, duzzaman Md (MCS) : It's MODULE_PALLET_SHORT TYPE: Empty Thank you! July 13, 2025 at 1:26 AM, Dávid F.A. : Thank you very much, it helped a lot! STK032 warehouse is ready for operation! July 13, 2025 at 1:27 AM, duzzaman Md (MCS) : Thank you for informing. July 13, 2025 at 1:29 AM, Mohammad Amir : Empty dunnage on the way to Module lien-1 now ✅. Thank you very much! July 13, 2025 at 2:30 AM, duzzaman Md (MCS) : This message was deleted. July 13, 2025 at 7:59 AM, FA CS AGV Jawad : @FA can you plz check End Product storage..? Conveyer has stopped July 13, 2025 at 8:09 AM, FACS_오창훈_CHANGHOON : Solved July 13, 2025 at 2:08 PM, András : 2F conveyor det error July 13, 2025 at 2:19 PM, Zoltán Harasztia FA : Kész July 13, 2025 at 2:19 PM, András : Köszi 😉 July 13, 2025 at 3:19 PM, FA CS AGV Jawad : @Zoltán Harasztia FA can you plz help at STK11..? July 13, 2025 at 3:19 PM, Döme György F.A : Coming July 13, 2025 at 3:19 PM, FA CS AGV Jawad : Thanks July 13, 2025 at 3:26 PM, FACS_Wooseok Choi : Solved July 13, 2025 at 3:28 PM, FA CS AGV Jawad : Thanka July 13, 2025 at 3:53 PM, FA CS AGV Jawad : @FA can you plz check STK 11 crane...? SEW travel X ERROR July 13, 2025 at 3:59 PM, Zoltán Harasztia FA : Solved July 13, 2025 at 4:32 PM, FA CS AGV Jawad : @FA can you plz check . July 13, 2025 at 4:33 PM, FACS_오창훈_CHANGHOON : Solved July 13, 2025 at 6:00 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0): - Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kasztel Balázs, Kovács Szabika Modul(2): Nagy Gábor, Martina Dávid July 13, 2025 at 6:20 PM, duzzaman Md (MCS) : Good evening @Fa For your information:- There is a fire sensor abnormal error in STK014 . Thank you very much! July 13, 2025 at 8:13 PM, N.Gábor F.A. : @MCS Hello. Could you please delete and then issue a new job for this pallet? It is currently on port M0CNV031_P01. U033628 July 13, 2025 at 8:14 PM, duzzaman Md (MCS) : @FA Please check M0CNV031_RTV01 It's OOS. Thank you! July 13, 2025 at 8:14 PM, duzzaman Md (MCS) : Checking July 13, 2025 at 8:14 PM, N.Gábor F.A. : Thank you July 13, 2025 at 8:15 PM, duzzaman Md (MCS) : Also, kindly check M0CNV023_83_025 Interface error Thank you very much. July 13, 2025 at 8:18 PM, Mohammad Amir : Good evening, Issue has been resolved successfully ✅ Now carrier has started to move to warehouse. We are monitoring for smooth delivery. Thank you very much! July 13, 2025 at 8:18 PM, N.Gábor F.A. : Thank you very much! July 13, 2025 at 8:18 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 8:22 PM, Mohammad Amir : Update :- Module Pallet short U033628 has successfully stored in the warehouse STK033(0201305) ✅. Feel free to contact us if you need any further assistance. Thank you very much! July 13, 2025 at 8:30 PM, Dávid F.A. : @duzzaman Md (MCS) Have a good evening!Solved July 13, 2025 at 8:31 PM, duzzaman Md (MCS) : Thank you very much for your support. July 13, 2025 at 9:44 PM, Mohammad Amir : @Dávid F.A. Please check CNV032_P01 there is Stop detect error and it is blocking tasks for AGV#10. Thank you very much! July 13, 2025 at 9:52 PM, Dávid F.A. : Solved !Thank you for telling me! July 13, 2025 at 9:52 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 11:10 PM, duzzaman Md (MCS) : Dear @FA Please check M0CNV031_RTV01 It's OOS. Interface error. And it has active job. Thank you very much ! July 13, 2025 at 11:19 PM, N.Gábor F.A. : Solved July 13, 2025 at 11:21 PM, duzzaman Md (MCS) : Thank you so much for your quick support as always. July 14, 2025 at 1:31 AM July 14, 2025 at 1:31 AM, duzzaman Md (MCS) : @FA @N.Gábor F.A. Please check M0CNV023_RTV02 RTV car stopper down error time delay. Thank you so much ! July 14, 2025 at 1:31 AM, N.Gábor F.A. : Checking July 14, 2025 at 1:31 AM, N.Gábor F.A. : Solved July 14, 2025 at 1:32 AM, Mohammad Amir : Thank you very much 🙏 July 14, 2025 at 2:08 AM, Mohammad Amir : @FA @Dávid F.A. Please check STK035_C01 there is Crane PLC error and it is blocking cell packaging jobs. Thank you very much! July 14, 2025 at 2:13 AM, Dávid F.A. : Thank you for letting me know! The warehouse is ready for operation! July 14, 2025 at 2:15 AM, duzzaman Md (MCS) : Thank you, too. Have a good rest of the shift. July 14, 2025 at 2:35 AM, duzzaman Md (MCS) : @FA Please check M0CNV032_P01 there is Stop detect error. Thank you very much ! July 14, 2025 at 2:38 AM, N.Gábor F.A. : Solved July 14, 2025 at 6:35 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 14, 2025 at 7:59 AM, Szabolcs : @FA M0CNV033_RTV01 1F not moving. Check please. July 14, 2025 at 8:06 AM, FACS_Wooseok Choi : Going July 14, 2025 at 8:16 AM, FACS_Wooseok Choi : It's auto run mode but it's stopped. July 14, 2025 at 8:25 AM, FACS_Wooseok Choi : @mcs rtv do not have destination. And now north area do not connect ccs. So, do you make a destination? July 14, 2025 at 8:26 AM, Shakir (MCS) : Could you please provide us carrier name or equipment id we will check Thank you July 14, 2025 at 8:27 AM, FACS_Wooseok Choi : M0CNV033-RTV, U030787 Thank you. July 14, 2025 at 8:27 AM, Shakir (MCS) : Checking July 14, 2025 at 8:29 AM, Shakir (MCS) : Where you want this carrier ?? July 14, 2025 at 8:31 AM, FACS_Wooseok Choi : North Ship dock out plz. Thank you July 14, 2025 at 8:35 AM, FACS_Wooseok Choi : It is moving. Thank you July 14, 2025 at 8:36 AM, Shakir (MCS) : Done ✅ Job created to M0CNV033_M03 Carrier started to move now Issue resolved Thank you July 14, 2025 at 8:49 AM, Magosi Erik : @Csepi Árpád 3-4 sor közt a material agv összefutnak. Csekkolj rájuk légyszi köszike July 14, 2025 at 9:11 AM, Shakir (MCS) : @FA Please check M0STK022_C01 there is MCP 0140MC03,MC04 on inverter power error. Thank you July 14, 2025 at 9:12 AM, FACS_Wooseok Choi : Checking July 14, 2025 at 9:26 AM, Roland : Sziasztok! M0CNV021 - CV012, CV015 RTav STK Alive signal error. Megtudnatok nezni kerlek? Koszonom July 14, 2025 at 9:32 AM, Édl Tamás : Kész July 14, 2025 at 9:35 AM, Brázik János : Kész July 14, 2025 at 9:39 AM, FACS_Wooseok Choi : The cause was a light curtain, and it looks like there will be a delay due to the current Mc problem. July 14, 2025 at 10:04 AM, FACS_Wooseok Choi : Machine name : M0STK022-STK Error : -Light curtain STK22_M01[bcr sticker]>>MC shut down Action : -Take off a bcr sticker -The crane is in auto mode when mc shut down, so I can't change it from OP to manual. -Change to PLC, identification code c197 July 14, 2025 at 10:36 AM, Alexandra : Sziasztok! A 2.emeleten a raktárban hiba van. Az anyag nem megy be. July 14, 2025 at 10:47 AM, 윤성제(Yoon SungJe) : @MCS Hello, may I know the current location of W000230? M4MFA300_P21 now has a carrier July 14, 2025 at 10:48 AM, Shakir (MCS) : Sure, Checking Thank you July 14, 2025 at 10:50 AM, Shakir (MCS) : The current location of carrier W000230: M0STK021(0201609) Thank you July 14, 2025 at 10:51 AM, Shakir (MCS) : Transfer job exists for M4MFA300_P21 but port P21 OOS. July 14, 2025 at 10:52 AM, Édl Tamás : Kész July 14, 2025 at 10:52 AM, 윤성제(Yoon SungJe) : If there is no problem, can you delete the job? July 14, 2025 at 10:53 AM, Shakir (MCS) : Yes, working on it ✅ July 14, 2025 at 10:53 AM, Shakir (MCS) : Job has been cancelled successfully ✅ Thank you July 14, 2025 at 10:54 AM, 윤성제(Yoon SungJe) : Thank you very much. July 14, 2025 at 10:54 AM, Shakir (MCS) : You’re welcome July 14, 2025 at 11:49 AM, Roland : M0STK021-es darun beragadt az anyag, nincs hiba, nem akarja kiadni. Raneztek kerlek? Koszonom July 14, 2025 at 11:55 AM, FACS_Wooseok Choi : Checking July 14, 2025 at 12:05 PM, FACS_Wooseok Choi : This issue was double cargo error because the wrapping was not perfect. Now it is moving. Thank you July 14, 2025 at 12:21 PM, Shakir (MCS) : @FA Please check M0STK035 Crane auto mode fork not home error. Thank you July 14, 2025 at 1:03 PM, FACS_JaewonShin : M0STK035 cant do fork out. We are checking on manual port July 14, 2025 at 1:07 PM, Alexandra : 2f cv021 light curtain error July 14, 2025 at 1:18 PM, FACS_JaewonShin : 0102307 has been blocked in m0stk035 July 14, 2025 at 1:31 PM, FACS_JaewonShin : When m0stk035 has no job, we will check 0102307 July 14, 2025 at 1:32 PM, Sazzad Bhai SKon : Currently it has 6 jobs July 14, 2025 at 1:57 PM, 윤성제(Yoon SungJe) : @FA Please check M0STK011 OUT PORT AGV7. July 14, 2025 at 1:59 PM, Roland : Most a M0STK024 daruba ragadt be egy anyag, hiba nelkul. Megtudjatok nezni, kerlek? Koszonom July 14, 2025 at 2:00 PM, Duna Don : There’s no error sir. Thank you! July 14, 2025 at 2:17 PM, Brázik János : Kész July 14, 2025 at 3:01 PM, Shakir (MCS) : @FA Please check M0STK014 MCP SMC2 disconnected error. Thank you July 14, 2025 at 3:01 PM, FACS_Bareum kim : Ok July 14, 2025 at 3:01 PM, FA CS AGV Jawad : FA team is working on it July 14, 2025 at 3:02 PM, Shakir (MCS) : Thank you for the information ✅ July 14, 2025 at 3:20 PM, 승규 (BAEK SEUNGGYU) : @FA All are stopped due to the cell buffer AGV ACS Fire Alarm. Please check. July 14, 2025 at 3:23 PM, FA CS AGV Jawad : All reset... July 14, 2025 at 3:23 PM, FA CS AGV Jawad : Back to normal now July 14, 2025 at 3:39 PM, 승규 (BAEK SEUNGGYU) : @FA GF Please check the 3-4 line lift. CV004DIV redirect CV STOP ERROR July 14, 2025 at 3:42 PM, Csepi Árpád : Solved July 14, 2025 at 3:48 PM, 승규 (BAEK SEUNGGYU) : @FA All are stopped due to the cell buffer AGV ACS Fire Alarm. Please check. Second. July 14, 2025 at 4:26 PM, 승규 (BAEK SEUNGGYU) : @FA,MCS M3MFA300_P03 T702208 Please raise your priorities. Cell warehousing is delayed. Thank you. July 14, 2025 at 4:26 PM, Shakir (MCS) : Working on it July 14, 2025 at 4:28 PM, Shakir (MCS) : Priority has been changed to highest. Thank you July 14, 2025 at 4:28 PM, 승규 (BAEK SEUNGGYU) : Thank you for your help. July 14, 2025 at 4:31 PM, Shakir (MCS) : @FA Please check M0STK011_C01 “Crane sew travel X fault” Thanks July 14, 2025 at 4:52 PM, FACS_Wooseok Choi : Solved July 14, 2025 at 6:47 PM, Kovács Krisztián : Line 1 Final agv in side stopped. Please check July 14, 2025 at 6:47 PM, FA-CS-AGV-Masoud : Coming July 14, 2025 at 8:39 PM, MCS/RTD System : @FA Please check M0CNV034 RTV 01 , RTV car work data error. Thank you very much ! July 14, 2025 at 8:45 PM, Denkó Jani (F.A.) : Going July 14, 2025 at 8:51 PM, Denkó Jani (F.A.) : Solved July 14, 2025 at 8:52 PM, MCS/RTD System : Thank you very much for the update. July 14, 2025 at 9:22 PM, Kurkó Péter : Hello valaki nézzen rá a line1 alkatrész raktárra nem hoz alsóburkolatot Köszönöm July 14, 2025 at 9:23 PM, Horváth Adriàn : Rànéztem. Tényleg nem hoz. 😁😎😂 July 14, 2025 at 9:25 PM, Denkó Jani (F.A.) : Köszönöm a megerősítést 🫡😂 July 14, 2025 at 9:38 PM, MCS/RTD System : @FA Please check M0STK038 MCP 1F OP1 light curtain detect error. Thank you very much July 14, 2025 at 10:11 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK031_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:11 -End : 5. Remark(special note) : - July 14, 2025 at 10:27 PM, Kovács Kármen : @Denkó Jani (F.A.) @Boromisza Zoltán Sziasztok! Line 3 és line 4re nem érkezik AGV a teli palettákért. Nézzetek rá légyszi. July 14, 2025 at 10:29 PM, Denkó Jani (F.A.) : Böing 🫡 July 14, 2025 at 10:29 PM, Denkó Jani (F.A.) : Photo July 14, 2025 at 10:34 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK031_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:11 -End : 22:34 5. Remark(special note) : -X July 14, 2025 at 10:37 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK032_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:37 -End : 5. Remark(special note) : - July 14, 2025 at 10:54 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK032_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:37 -End : 22:54 5. Remark(special note) : -X July 14, 2025 at 10:55 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK033_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:55 -End : 5. Remark(special note) : - July 14, 2025 at 11:17 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK033_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:55 -End : 23:10 5. Remark(special note) : -X July 14, 2025 at 11:28 PM, Niki (Modul) : @Boromisza Zoltán hátsó rakiban az anyag megragadt July 14, 2025 at 11:30 PM, MCS/RTD System : @FA Please check M0CNV023_RTV02 RTV car stopper down error time delay. Thank you so much ! July 15, 2025 at 12:27 AM July 15, 2025 at 12:27 AM, MCS/RTD System : @FA Please check M0STK035 Crane auto mode fork not home error. Thank you very much ! July 15, 2025 at 3:41 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:40 -End : 5. Remark(special note) : - July 15, 2025 at 4:04 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:40 -End : 04:03 5. Remark(special note) : - 1열7행6단 케이블 접촉 불량 -> 재결합 July 15, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 15, 2025 at 6:29 AM, MCS/RTD System : @FA Please check M0STK022_P02 is out of service. Thank you July 15, 2025 at 6:40 AM, Édl Tamás : Solved July 15, 2025 at 6:52 AM, Szabolcs : @FA M0CNV033_RTV01 problem. Check please. July 15, 2025 at 7:18 AM, FA/CS/AGV_ Asjad : @MCS Good morning! Could you please send Pallet Z103395 (AGV #4) and Z103386 (AGV #5) back to the warehouse, as the box packing machine is currently out of service. Thank you! July 15, 2025 at 7:19 AM, Shakir (MCS) : Sure Checking Thank you July 15, 2025 at 7:25 AM, Shakir (MCS) : Issue has been resolved now ✅ AGV04 and AGV05 on the way to its source warehouse Thank you July 15, 2025 at 7:34 AM, Magosi Erik : @Édl Tamás kérlek gyere a 3-4 sorhoz. Material agv-k nem férnek el egymastól July 15, 2025 at 7:34 AM, Magosi Erik : Köszike July 15, 2025 at 7:35 AM, FA/CS/AGV_ Asjad : Checking July 15, 2025 at 7:55 AM, Szabolcs : @FA M0CNV033_RTV01 problem. Check please. July 15, 2025 at 7:57 AM, FACS_Wooseok Choi : Checking July 15, 2025 at 9:15 AM, Roland : Hello M0STK22,23-asnal Double cargo error van. Megtudjatok nezni kerlek? Koszonom! July 15, 2025 at 9:16 AM, Szabolcs : @FA M0CNV033 GF CV031 Light Curtain Error CV031 Product DETECT Error Check please. July 15, 2025 at 9:27 AM, Alexandra : 2f cv042 light curtain error July 15, 2025 at 9:28 AM, Csepi Árpád : Solved July 15, 2025 at 9:29 AM, Édl Tamás : Kész July 15, 2025 at 9:59 AM, Édl Tamás : Kész July 15, 2025 at 10:32 AM, Roland : M0STK021 - Double cargo error! Megtudjatok nekunk csinalni, legyszives? Koszonjuk! July 15, 2025 at 10:37 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 남측 모듈 완제품 창고 1F M0CNV036_RTV01 기동 정지 상태입니다. 확인 브틱드립니다 July 15, 2025 at 10:37 AM, FACS_JaewonShin : 현장으로 가겠습니다 July 15, 2025 at 12:20 PM, Szabolcs : @FA M0STK033_P14 port problem. Not moving. Check please. July 15, 2025 at 12:21 PM, Szabolcs : 1F July 15, 2025 at 12:28 PM, Csepi Árpád : Solved July 15, 2025 at 12:28 PM, Alexandra : 2f in lift conveyor det. error July 15, 2025 at 12:30 PM, Csepi Árpád : Solved July 15, 2025 at 1:06 PM, FACS_Wooseok Choi : @Shakir (MCS) Can you delete Command id T703482? Cell buffer 14 and it is m0stk14_p03 currently July 15, 2025 at 1:09 PM, FACS_Wooseok Choi : And then T703482 do not have a destination. Could you make a destination? July 15, 2025 at 1:12 PM, Sazzad Bhai SKon : Job failed. Reason: object doesn't exist. Please confirm it's physical location July 15, 2025 at 1:13 PM, FACS_Wooseok Choi : Okay. We will do it manual. Thank you. July 15, 2025 at 1:28 PM, MCS/RTD System : @FA Please check M0STK027 MCP 2F OP2 light curtain detect error. Thank you July 15, 2025 at 1:29 PM, MCS/RTD System : Also please check M0STK037_P12 is OOS. July 15, 2025 at 1:30 PM, MCS/RTD System : Please check M0CNV033_BP03 Interface error. July 15, 2025 at 1:42 PM, FACS_Wooseok Choi : Solved July 15, 2025 at 1:43 PM, Brázik János : Solved July 15, 2025 at 2:06 PM, 윤성제(Yoon SungJe) : @MCS Hello M3MFA300_P17,PS22A-2507100660 Please send the carrier back to the warehouse P17 has PS22A-2507100664. July 15, 2025 at 2:06 PM, Shakir (MCS) : Sure, Working on it Thank you July 15, 2025 at 2:09 PM, Shakir (MCS) : @FA/CS/AGV_ Asjad Could you please cancel the Job for AGV03 from ACS, then I will transfer carrier to the warehouse. Thank you July 15, 2025 at 2:09 PM, FA/CS/AGV_ Asjad : Sure July 15, 2025 at 2:14 PM, FA/CS/AGV_ Asjad : Done July 15, 2025 at 2:15 PM, Alexandra : 2f cv037 stop detect error, slow detect error July 15, 2025 at 2:18 PM, Shakir (MCS) : Job has been initiated and AGV03 on the way to its source warehouse. Thank you July 15, 2025 at 2:20 PM, 윤성제(Yoon SungJe) : Thank you very much. July 15, 2025 at 2:20 PM, Shakir (MCS) : You’re welcome July 15, 2025 at 2:24 PM, 승규 (BAEK SEUNGGYU) : @MCS M3MFA300_P33 PS22A-2507090009 The material must also be moved to the warehouse. July 15, 2025 at 2:30 PM, Shakir (MCS) : Working on it Thank you July 15, 2025 at 2:35 PM, Shakir (MCS) : @FA Please check M0STK027_P22 port is OOS, carriers blocked. Thank you July 15, 2025 at 2:37 PM, Shakir (MCS) : Due to STK027 input port being Out of Service, the carrier is currently unable to return to the warehouse and is waiting for the port to become available. The issue has already been reported to the FA team for further action. Thank you. July 15, 2025 at 2:43 PM, 승규 (BAEK SEUNGGYU) : M3MFA300_P33 resolved. Thank you. July 15, 2025 at 2:44 PM, Shakir (MCS) : You’re welcome July 15, 2025 at 4:43 PM, FA/CS/AGV_ Asjad : @Shakir (MCS) Could you please check only Z, S, and R-type pallets should come to box packing. T-type pallets should not be sent there. Thank You! July 15, 2025 at 4:49 PM, Shakir (MCS) : Checking July 15, 2025 at 4:52 PM, Shakir (MCS) : There is only 1 T pallet available in lot. That’s why T pallets not coming to Box packing. July 15, 2025 at 4:52 PM, FA/CS/AGV_ Asjad : T-type pallets should not come. July 15, 2025 at 4:53 PM, Shakir (MCS) : On it, we are working on it July 15, 2025 at 4:53 PM, FA/CS/AGV_ Asjad : Thank you July 15, 2025 at 4:57 PM, Sazzad Bhai SKon : In that case please request to PM @박태영 . If he order then we can modify RTd rules. July 15, 2025 at 5:00 PM, FA/CS/AGV_ Asjad : The operators had to manually remove T-type pallets twice earlier, so they’ve requested that only Z, S, and R-type pallets be sent to box packing. July 15, 2025 at 5:01 PM, FA/CS/AGV_ Asjad : Thank you for your assistance. July 15, 2025 at 5:01 PM, Hmyang(Hungary) : @배병민 (Bae Byoungmin) @FACS_JaewonShin July 15, 2025 at 5:09 PM, 배병민 (Bae Byoungmin) : This part may have been entered incorrectly due to a mistake in MES packaging selection in Formation. July 15, 2025 at 5:21 PM, MCS/RTD System : @FA Please check STK038_C01 there is Crane PLC interface error. Thank you July 15, 2025 at 5:48 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. July 15, 2025 at 5:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : South module product warehouse 1F M0STK038_C01 Please check the crane alarm. July 15, 2025 at 5:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : 남측 모듈 완제품 창고 1F M0STK038_C01 크레인 알람발생하여 확인 부탁드립니다 July 15, 2025 at 5:54 PM, FACS_Bareum kim : 증상 : 무언정지 원인 : Manual Port#01 제품감지센서(X8D0), 센서틀어짐. 오작동 조치 : 센서 위치고정 July 15, 2025 at 6:23 PM, Dániel Hufnágel : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.15. 9 Tech,+3 overtime 1SL Overtime(3): Szabadi Miklós, Kovács Szabolcs, Hufnágel Dániel Holiday(1): Szücs Géza Imre, Sick(1): Czeilinger Krisztián Shift Change(0): --------------- Electrode(4): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (4): Takács Ádám, Böröczki Balázs, Kovács Szabolcs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbe July 15, 2025 at 7:41 PM, Tóth Gyula : Sziasztok, Az MOCNV033_M02 porton Dunnage betöltés van folyamatban, de nagyon lassan megy. Nem lehet ezen valahogy gyorsítani? July 15, 2025 at 7:45 PM, FACS_Hyeongi Son : Going July 15, 2025 at 7:58 PM, Denkó Jani (F.A.) : Solved July 15, 2025 at 8:14 PM, Tóth Gyula : Danke July 15, 2025 at 8:14 PM, Denkó Jani (F.A.) : Bitte 🫡 July 15, 2025 at 8:49 PM, MCS/RTD System : @FA Please check 1F M0STK037 port 12 It's out of service July 15, 2025 at 8:52 PM, FACS_Hyeongi Son : Going July 15, 2025 at 8:59 PM, Denkó Jani (F.A.) : Solved July 15, 2025 at 9:06 PM, Tóth Gyula : U032825 U032821 Paletták nagyon lassan jönnek ki... July 15, 2025 at 9:06 PM, Tóth Gyula : Sorry, U032831 July 15, 2025 at 9:07 PM, Denkó Jani (F.A.) : Megyek July 15, 2025 at 9:28 PM, Tóth Gyula : U032825 🙏 July 15, 2025 at 9:41 PM, FACS_Hyeongi Son : @MCS Can you check this? July 15, 2025 at 9:43 PM, VK (mcs) : First floor M0STK033 port 14 is out of service and carrier is waiting for that. July 15, 2025 at 9:43 PM, FACS_Hyeongi Son : Thank you for your information July 15, 2025 at 9:43 PM, VK (mcs) : Anytime July 15, 2025 at 9:50 PM, FACS_Hyeongi Son : @VK (mcs) The cargo is moving now July 15, 2025 at 9:50 PM, VK (mcs) : Thank you July 15, 2025 at 9:53 PM, Tóth Gyula : It is here Thank you... July 15, 2025 at 10:04 PM, Kurkó Péter : Hello 4line endplate gantry stopped Gripper clamp tray not detect error Pls check thx July 15, 2025 at 10:29 PM, Boromisza Zoltán : Solved July 16, 2025 at 12:27 AM July 16, 2025 at 12:27 AM, FA/CS/AGV/Taimur : @VK (mcs) can you please sent carrier: U033933 back to origin autostorage loaded on AGV: 14 in END PROD GF. The job is pending since last night. Thanks. July 16, 2025 at 12:30 AM, VK (mcs) : Done July 16, 2025 at 3:12 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:11 -End : 5. Remark(special note) : - July 16, 2025 at 3:25 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:11 -End : 03:21 5. Remark(special note) : - 1열15행6단 케이블 접촉불량 ->재결합 July 16, 2025 at 5:50 AM, FACS_오창훈_CHANGHOON : ■16th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Oh Changhoon July 16, 2025 at 8:00 AM, FACS_JaewonShin : ■16th July Ivancsa FA CS - Withes service Daily(08:00 - 18:00) Jaewon shin July 16, 2025 at 8:11 AM, Szabolcs : @FA M0STK033_P14 1F port problem. Not moving. Check please. July 16, 2025 at 8:11 AM, Döme György F.A : Megyünk July 16, 2025 at 8:17 AM, Csuti Zoltán F.A : Kész July 16, 2025 at 8:29 AM, MCS/RTD System : Dear @FA @Zoltán Harasztia FA Please check CNV034-RTV01 it has car work data error and several jobs are pending. Thank you! July 16, 2025 at 8:31 AM, Döme György F.A : Checking July 16, 2025 at 8:38 AM, Döme György F.A : Solved July 16, 2025 at 9:13 AM, MCS/RTD System : @FA Please check STK014_P01 there is stop detect time over error. Thank you! July 16, 2025 at 9:17 AM, MCS/RTD System : @FA Please check STK035_C01 there is SMC #1 disconnected error and it is blocking several tasks. Thank you very much! July 16, 2025 at 9:18 AM, Zoltán Harasztia FA : Cheking July 16, 2025 at 9:19 AM, Mohammad Amir : @Zoltán Harasztia FA Update :- This issue has been resolved ✅ Thank you very much! July 16, 2025 at 9:23 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK034 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:25 -End : 5. Remark(special note) : July 16, 2025 at 9:32 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK034 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:25 -End : 09:30 5. Remark(special note) : July 16, 2025 at 9:35 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK037 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:35 -End : 5. Remark(special note) : July 16, 2025 at 9:36 AM, Roland : Sziasztok! M0CNV021 - CV015 Conveyor Run Time over error. Megtudjatok kerlek nezni? Koszonom July 16, 2025 at 9:38 AM, Zoltán Harasztia FA : Megyünk July 16, 2025 at 9:40 AM, MCS/RTD System : This message was deleted. July 16, 2025 at 9:40 AM, MCS/RTD System : @FA Please check STK014_P03 there is data mismatch error and some jobs are getting delayed. Thank you! July 16, 2025 at 9:42 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK037 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:35 -End : 09:42 5. Remark(special note) : July 16, 2025 at 9:43 AM, FACS_JaewonShin : Checking now July 16, 2025 at 9:44 AM, Zoltán Harasztia FA : Kész July 16, 2025 at 9:44 AM, MCS/RTD System : Thank you very much July 16, 2025 at 9:44 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK025 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:45 -End : 5. Remark(special note) : July 16, 2025 at 9:57 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK025 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:45 -End : 09:50 5. Remark(special note) : July 16, 2025 at 9:57 AM, MCS/RTD System : @FA Please check STK027 ,it is OOS. Thank you! July 16, 2025 at 9:57 AM, Mohammad Amir : Dear @Zoltán Harasztia FA , Please check M0STK021_C01 there is Crane fork right collapsed detect error and it has blocked several jobs. Thank you very much! July 16, 2025 at 9:57 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK027 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:55 -End : 5. Remark(special note) : July 16, 2025 at 9:58 AM, FACS_오창훈_CHANGHOON : This message was deleted. July 16, 2025 at 9:58 AM, FACS_오창훈_CHANGHOON : Now checking July 16, 2025 at 10:04 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK027 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 09:55 -End : 10:03 5. Remark(special note) : July 16, 2025 at 10:05 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK026 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 10:05 -End : 5. Remark(special note) : July 16, 2025 at 10:10 AM, MCS/RTD System : Dear @Zoltán Harasztia FA This error still exists since 9:53 and because of this several jobs are pending. Thank you very much! July 16, 2025 at 10:12 AM, Zoltán Harasztia FA : We are also on TBM, and we will take action soon. July 16, 2025 at 10:12 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK026 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 10:05 -End : 10:12 5. Remark(special note) : July 16, 2025 at 10:19 AM, FACS_오창훈_CHANGHOON : Checking July 16, 2025 at 10:23 AM, Gabor(priv) : Dear Team! Please move AGV15 on module GF to somewhere else. It is blocking the maunal fire alarm button. July 16, 2025 at 10:24 AM, FA/CS/AGV_ Asjad : Sure July 16, 2025 at 10:26 AM, FA/CS/AGV_ Asjad : Done July 16, 2025 at 10:27 AM, FACS_오창훈_CHANGHOON : Solved July 16, 2025 at 10:31 AM, MCS/RTD System : Please also check CNV036 ,it is OOS as well. Thank you! July 16, 2025 at 10:32 AM, Zoltán Harasztia FA : Solved July 16, 2025 at 10:36 AM, MCS/RTD System : Thank you very much July 16, 2025 at 10:39 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK035 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 10:40 -End : 5. Remark(special note) : July 16, 2025 at 10:44 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK035 3. Action detail : -크레인 와이어 체크 4.Work time -Start : 10:40 -End : 10:45 5. Remark(special note) : July 16, 2025 at 10:50 AM, Roland : M0CNV021es conveyorba beragadt a raklap, nem adja ki, nincs hiba kod. Meglesitek legyszives? Koszonom 🙏🏻 July 16, 2025 at 10:59 AM, Zoltán Harasztia FA : Megyünk July 16, 2025 at 11:04 AM, Döme György F.A : Kész July 16, 2025 at 11:12 AM, MCS/RTD System : @FA , Please check M0STK021_C01 there is Crane fork right collapsed detect error and it has blocked several jobs. Thank you very much! July 16, 2025 at 11:20 AM, Döme György F.A : Checking July 16, 2025 at 11:26 AM, Mohammad Amir : @Zoltán Harasztia FA Please check STK022_C01 there is Double cargo error and it also blocking several tasks. Thank you very much! July 16, 2025 at 11:29 AM, Döme György F.A : Checking.I'm here July 16, 2025 at 11:35 AM, Döme György F.A : Solved July 16, 2025 at 11:35 AM, Mohammad Amir : Thank you very much! July 16, 2025 at 11:40 AM, Mohammad Amir : @Döme György F.A Please check CNV033_BP04 there is Run time error and it is blocking materials delivery to manual port. Thank you very much! July 16, 2025 at 11:41 AM, Döme György F.A : Solved July 16, 2025 at 11:41 AM, Döme György F.A : Checking July 16, 2025 at 11:41 AM, Mohammad Amir : Thank you very much! July 16, 2025 at 11:47 AM, Döme György F.A : There is no problem with it at the moment. We are monitoring a few pieces. July 16, 2025 at 11:50 AM, Mohammad Amir : It was OOS since 11:32 and at 11:41 it came to service ,so issue has been already resolved ✅. Thank you very much! July 16, 2025 at 11:51 AM, Döme György F.A : thank you very much for the information! July 16, 2025 at 11:52 AM, Mohammad Amir : You are most welcome! July 16, 2025 at 11:59 AM, Mohammad Amir : @Döme György F.A Please check STK021_C01 there is Double Cargo error and it is blocking materials delivery to manual port. Thank you very much! July 16, 2025 at 12:01 PM, Döme György F.A : Solved July 16, 2025 at 12:01 PM, MCS/RTD System : Thank you very much July 16, 2025 at 12:03 PM, Döme György F.A : Szívesen July 16, 2025 at 12:50 PM, MCS/RTD System : @FA, Please check CNV023_34_035 there is wrapper sealing not detected error. Thank you! July 16, 2025 at 12:53 PM, Döme György F.A : It is likely that the machine operator is changing the film, but we’ll check it right away. July 16, 2025 at 12:54 PM, Mohammad Amir : Dear @Döme György F.A Update:- Issue has already been resolved ✅. You don't need to go. Thank you very much! July 16, 2025 at 12:55 PM, Döme György F.A : Thank you very much! July 16, 2025 at 12:55 PM, Mohammad Amir : You are welcome! July 16, 2025 at 1:05 PM, 윤성제(Yoon SungJe) : @FA Today, we are planning to move modules by forklift at module line endport from 1pm. Please control AGV. July 16, 2025 at 1:06 PM, FA/CS/AGV_ Asjad : Sure July 16, 2025 at 1:06 PM, 배병민 (Bae Byoungmin) : 전라인 배출은 수동 투입이신건가요? July 16, 2025 at 1:07 PM, 윤성제(Yoon SungJe) : 아닙니다 5라인 보충전 모듈 지게차 이동으로 인해 AGV컨트롤 지원 부탁드렸습니다 July 16, 2025 at 1:09 PM, 배병민 (Bae Byoungmin) : 아..넵 알겠습니다 July 16, 2025 at 1:16 PM, FA/CS/AGV_ Asjad : The path is clear for forkLift movement. Thank you! July 16, 2025 at 1:19 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK31,32,33,21,22,23,24 3. Action detail : -북측 창고 크레인 와이어 체크 진행합니다. 설비 작업이 없을 때 진행하고 10분 이내 완료 예정입니다. -We will carry out a wire check on the north-side warehouse crane. The inspection will be conducted when there is no operation on each piece of equipment, and it is expected to be completed within 10 minutes. Thanks 4.Work time -Start : 13:20 -End : 5. Remark(special note) : July 16, 2025 at 1:31 PM, MCS/RTD System : @Zoltán Harasztia FA Please check STK022_C01 there is Double cargo error and it also blocking several tasks. Thank you very much! July 16, 2025 at 1:31 PM, Zoltán Harasztia FA : Cheking July 16, 2025 at 1:35 PM, FACS_오창훈_CHANGHOON : Checking July 16, 2025 at 1:38 PM, Zoltán Harasztia FA : Solved July 16, 2025 at 2:20 PM, FACS_오창훈_CHANGHOON : @Mohammad Amir Please check the job for STK Unit 33. There is no cargo on the crane or at the port. July 16, 2025 at 2:21 PM, MCS/RTD System : Checking Sir July 16, 2025 at 2:23 PM, MCS/RTD System : Sir Currently, this STK033 has no job. If you need further information, please feel free to ask me. Thank you very much! July 16, 2025 at 2:26 PM, FACS_오창훈_CHANGHOON : Thank you July 16, 2025 at 2:26 PM, Mohammad Amir : You are most welcome! July 16, 2025 at 2:45 PM, Mohammad Amir : Dear @All, For your information:- Available materials for Box packing:- Box packing (F0BPM011_P02){S}:-121. Thank you very much! July 16, 2025 at 2:49 PM, 승규 (BAEK SEUNGGYU) : @FA M3MFA300_P01 T702908Please raise your priorities. We expect delays. July 16, 2025 at 2:54 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK31,32,33,21,22,23,24 3. Action detail : -북측 창고 크레인 와이어 체크 진행합니다. 설비 작업이 없을 때 진행하고 10분 이내 완료 예정입니다. -We will carry out a wire check on the north-side warehouse crane. The inspection will be conducted when there is no operation on each piece of equipment, and it is expected to be completed within 10 minutes. Thanks 4.Work time -Start : 13:20 -End : 14:50 5. Remark(special note) : July 16, 2025 at 2:58 PM, FACS_JaewonShin : 브릿지 문제로 정체되었습니다 현재 stk14로 이송중이며 이후 m3mfa300으로 이송할거같습니다 July 16, 2025 at 3:05 PM, FACS_JaewonShin : AGV Vc07에 싣고 M3MFA300으로 이송중입니다 July 16, 2025 at 3:06 PM, 승규 (BAEK SEUNGGYU) : 도움 감사합니다! July 16, 2025 at 3:11 PM, Roland : M0STK024-et megtudjatok nezni? Koszonom! July 16, 2025 at 3:12 PM, Döme György F.A : Nézzük July 16, 2025 at 3:22 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 남측 모듈 완제품 창고 1F M0CNV033_RTV01 무언 정지 상태입니다. M0STK032_C01 크레인 정지 상태입니다 확인 부탁드립니다. July 16, 2025 at 3:23 PM, FACS_오창훈_CHANGHOON : 지금 조치중입니다 July 16, 2025 at 3:26 PM, Gabor(priv) : Please check one more time… Agv still in same position. July 16, 2025 at 3:27 PM, FA/CS/AGV_ Asjad : Moved July 16, 2025 at 3:28 PM, Gabor(priv) : No July 16, 2025 at 3:28 PM, FACS_오창훈_CHANGHOON : 조치되었습니다 July 16, 2025 at 3:31 PM, Gabor(priv) : I’m standing in front of it. The AGV with a big 15 label on it is still powerd off and in the same position. July 16, 2025 at 3:31 PM, FA/CS/AGV_ Asjad : Coming July 16, 2025 at 4:43 PM, Farkas Misi : Sziasztok! M0CNV033 Raktár meg állt. Légyszives nézzetek rá! Köszönöm. July 16, 2025 at 4:56 PM, Zoltán Harasztia FA : Megyünk July 16, 2025 at 6:12 PM, FACS_Hyeongi Son : ■ 16th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 16, 2025 at 6:22 PM, MCS/RTD System : @FA , Good evening Please check M0CNV031_RTV01 , Interface error. Thank you July 16, 2025 at 6:23 PM, FACS_Hyeongi Son : Going July 16, 2025 at 6:30 PM, FACS_Hyeongi Son : Solved July 16, 2025 at 6:30 PM, Shakir (MCS) : Thank you July 16, 2025 at 7:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12+1 Overtime (1):Denkó János Sick (0): - Holiday (2): Kasztel Balázs, Kiss Balázs Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kovács Szabika Modul(2): Denkó János, Martina Dávid July 17, 2025 at 7:29 AM July 17, 2025 at 7:29 AM, FA/CS/AGV_ Asjad : @FA Please check M0STK011 - Crane error Thank you! July 17, 2025 at 7:29 AM, Döme György F.A : Checking July 17, 2025 at 8:32 AM, MCS/RTD System : Dear @All, For your information:- Available materials for Box packing:- Box packing (F0BPM011_P02){S}:-31. Thank you very much! July 17, 2025 at 9:04 AM, Roland : Hello M0STK023 - Crane Fork Right Collapse detect error! Megtudjatok nezni, legyszives? Koszonom July 17, 2025 at 9:04 AM, Zoltán Harasztia FA : Megyünk July 17, 2025 at 9:18 AM, Csuti Zoltán F.A : Kész July 17, 2025 at 9:49 AM, Mohammad Amir : Dear @All, Good morning, We are receiving MCS buzzer from CNV021_M01 because of MES error. Cause manufacturing trying to Rackin carrier PS22A-2507160023 but for this carrier WRHSLOCCD of the material does not match. @MES , please check this issue. Thank you very much! July 17, 2025 at 9:51 AM, MCS/RTD System : @Zoltán Harasztia FA Please check STK028_C01 there is light curtain detected error. Thank you very much! July 17, 2025 at 9:51 AM, Zoltán Harasztia FA : Cheking July 17, 2025 at 11:26 AM, Mohammad Amir : Dear @Zoltán Harasztia FA Please make port STK033_P02 into Auto mode , currently it is in Manual mode hence OOS and because of it job for U034215 is pending. Thank you very much! July 17, 2025 at 11:27 AM, Zoltán Harasztia FA : Cheking July 17, 2025 at 11:32 AM, Zoltán Harasztia FA : The PLC colleagues are checking the port, that’s why it is still in manual mode. July 17, 2025 at 11:33 AM, Mohammad Amir : Thank you very much for the confirmation! July 17, 2025 at 11:33 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.17 2.Machine name : -M0CNV031_21 3. Action detail : -DIV UP/DOWN Time Over 원인 분석 4.Work time -Start : 11:30 -End : 5. Remark(special note) : July 17, 2025 at 11:40 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.17 2.Machine name : -M0CNV031_21 3. Action detail : -DIV UP/DOWN Time Over 원인 분석 4.Work time -Start : 11:30 -End : 11:40 5. Remark(special note) : July 17, 2025 at 11:41 AM, FACS_오창훈_CHANGHOON : Solved July 17, 2025 at 11:41 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:16 PM, András : 2f CV026DIV redirect CV stop error July 17, 2025 at 12:18 PM, Döme György F.A : Megyek July 17, 2025 at 5:50 PM, FACS_TaehyeongJin : ■ 17th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 17, 2025 at 6:46 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (0): - Holiday (2): Kiss Balázs, Nagy Gábor Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Kasztel Balázs, Novák Zoltán, Kovács Szabika Modul(2): Zsurbej Zsolt, Martina Dávid July 17, 2025 at 8:07 PM, MCS/RTD System : @FA Please check M0STK023 MCP 2F OP2 light curtain detect error. Thank you July 17, 2025 at 8:16 PM, FACS_TaehyeongJin : Going July 17, 2025 at 8:29 PM, FACS_TaehyeongJin : Solved July 17, 2025 at 9:27 PM, 승규 (BAEK SEUNGGYU) : @FA 3라인 앤드플레이트 구간 지원 부탁드립니다. Tray total count min 에러가 계속 나오고 있습니다. July 17, 2025 at 9:27 PM, FACS_Hyeongi Son : 이동하겠습니다 July 18, 2025 at 6:34 AM July 18, 2025 at 6:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Csepi Árpád ———————————— July 18, 2025 at 7:25 AM, Szabolcs : @FA M0STK037_P12 not moving. Check please. July 18, 2025 at 7:25 AM, Magosi Erik invited Mérei József. July 18, 2025 at 7:35 AM, Csepi Árpád : Solved July 18, 2025 at 7:38 AM, 윤성제(Yoon SungJe) : This message was deleted. July 18, 2025 at 7:51 AM, FACS_오창훈_CHANGHOON : ■18th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Oh Changhoon July 18, 2025 at 8:45 AM, Roland : Sziasztok! M0STK022 - Crane Fork right collapse detect error! Megtudjatok nezni kerlek? Koszonom! July 18, 2025 at 8:55 AM, Szabo Ede Sandor : Sziasztok Segítséget szeretnék kérni a OQC porthoz. Nem vitte el az AGV a palettákat de már a másik itt van a kikért palettákkal. July 18, 2025 at 8:55 AM, Csepi Árpád : Solved July 18, 2025 at 8:57 AM, Mohammad Amir : Hello, Issue has been resolved successfully ✅ Please press UR again. AGV will take the pallet from OQC port . I am monitoring. Thank you very much! July 18, 2025 at 8:59 AM, Szabo Ede Sandor : De az AGV-n rajta vannak a paletták amiket ki kértünk a raktárból. July 18, 2025 at 9:03 AM, Mohammad Amir : Hello, Please press UR and also confirm U034371 located on OQC. Thank you very much! July 18, 2025 at 9:12 AM, Szabo Ede Sandor : Hello Semmi nem történt. July 18, 2025 at 9:14 AM, Mohammad Amir : Hello, 1:-We still didn't receive any UR that's why AGV still not picking the pallet,I already resolved the issue ✅. 2:-Please confirm with me U034371 located at P01 ? Thank you very much! July 18, 2025 at 9:15 AM, Duna Don : I will check it on-site. Thank you July 18, 2025 at 9:16 AM, Mohammad Amir : Thank you very much Dear @Duna Don . July 18, 2025 at 9:19 AM, FACS_오창훈_CHANGHOON : We move AGV 6 to 6030 and wait for another AGV to come to OQC July 18, 2025 at 9:19 AM, Duna Don : The pallet ID is correct now they will take it out manually. Thank you!! July 18, 2025 at 9:20 AM, FACS_오창훈_CHANGHOON : OQC cargo is moved manually July 18, 2025 at 9:20 AM, Mohammad Amir : Thank you very much for the confirmation. July 18, 2025 at 9:23 AM, Mohammad Amir : Dear @All, Now UR received successfully at 9:19 and automatic job has created and AGV#10 on the way to pick the pallet U034371 from the OQC port ✅ And AGV#6 will deliver the pallet to the OQC port ,it is a manual job created from MES UI to deliver U034400. Thank you very much! July 18, 2025 at 9:24 AM, Szabolcs : @FA M0STK033_RTV01 1F not moving. Check please. July 18, 2025 at 9:27 AM, Mohammad Amir : Update:- As I checked now Automatic job for unloading of OQC port was cancelled. Could you please again confirm whether U034371 is still located there as in our database it is still on the OQC port . Thank you very much! July 18, 2025 at 9:30 AM, Duna Don : The forklift driver is going to load this pallet manually. July 18, 2025 at 9:30 AM, Mohammad Amir : Thank you very much for the confirmation. Updated:- We received report now that it is manually removed from the ports ✅. July 18, 2025 at 9:31 AM, Duna Don : Yes now it’s on the port. Thank you! July 18, 2025 at 9:33 AM, Duna Don : AGV #9 is on its way to take it out. July 18, 2025 at 9:33 AM, Mohammad Amir : UR received successfully again on 9:31 carrier on the way to warehouse 32 automatically ✅. Thank you very much! July 18, 2025 at 9:34 AM, FACS_오창훈_CHANGHOON : This message was deleted. July 18, 2025 at 9:34 AM, FACS_오창훈_CHANGHOON : Solved July 18, 2025 at 9:37 AM, Csepi Árpád : The transport task is in progress on AGV09. July 18, 2025 at 9:50 AM, Mohammad Amir : This message was deleted. July 18, 2025 at 9:55 AM, Mohammad Amir : Dear @Szabo Ede Sandor Good Morning, Here is the summary:- First UR received but it failed due to an issue at 8:26 that's why AGV didn't come to pick the material. Afterwards,at 8:31 Load job was created to tranfer materials U034400 to tranfer materials to destination OQC_P01 port by MES UI and it was manual job. At 8:57 I have resolved the issue. ✅ At 9:21 UR received successfully and automatic job created to unload but it was cancelled. At 9:25 U034400 delivered to port PO1.(As there July 18, 2025 at 9:56 AM, Mohammad Amir : In this scenario,even there is a material on OQC port to unload but AGV will bring the materials as it was manually created task from MES so if you press UR after issue was resolved AGV will unload the port automatically and another AGV will deliver the material which is created manually. But the best senrio is that first you let the automatic UR job started and afterwards create manual jobs to transfer materials to OQC port. Thank you very much! July 18, 2025 at 9:57 AM, MCS/RTD System : @FA Please check CNV031_RTV there is car return to origin error and several tasks are pending. Thank you very much! July 18, 2025 at 10:03 AM, Csepi Árpád : Solved July 18, 2025 at 10:45 AM, Mohammad Amir : This message was deleted. July 18, 2025 at 10:54 AM, Alexandra : 2f in lift floor in position error, gf stop time over July 18, 2025 at 11:00 AM, Csepi Árpád : Solved July 18, 2025 at 11:35 AM, MCS/RTD System : @FA Please check STK021_C01 there is double cargo error and several jobs are pending. Thank you very much! July 18, 2025 at 11:37 AM, MCS/RTD System : @FA Please Also check STK023_C01 there is Crane fork left wide #1 check error. Thank you! July 18, 2025 at 11:48 AM, Csepi Árpád : Solved July 18, 2025 at 11:48 AM, MCS/RTD System : Thank you very much! July 18, 2025 at 11:56 AM, Csepi Árpád : Solved July 18, 2025 at 11:57 AM, MCS/RTD System : Thank you very much! July 18, 2025 at 12:24 PM, Mohammad Amir : Dear @All, Available materials:- Cell Pallet :- Module line 1&3&4 :- 1185 Dunnage:- Module line 1&3&4:-318 Thank you very much! July 18, 2025 at 1:11 PM, MCS/RTD System : @FA Please check STK024_C01 there is Double cargo error. Thank you! July 18, 2025 at 1:30 PM, FACS_오창훈_CHANGHOON : Solved July 18, 2025 at 1:30 PM, MCS/RTD System : Thank you very much! July 18, 2025 at 1:49 PM, 윤성제(Yoon SungJe) : @Mohammad Amir Hello. I manually put the PF221-2507040031 carrier into M3MFA300_P25. Can you check if the information has been updated? July 18, 2025 at 1:53 PM, Mohammad Amir : Good afternoon Sir, According to our MCS database currently this carrier is located at M8MFA300_P26. Have you already put the carrier at M3MFA300_P25? Should i update the location in our database as well? Thank you very much! July 18, 2025 at 1:54 PM, 윤성제(Yoon SungJe) : Yes, the current location is M3MFA300_P25. Please update the location. July 18, 2025 at 1:55 PM, Mohammad Amir : Sir, Data has been updated in our database as well ✅ Thank you very much! July 18, 2025 at 1:56 PM, 윤성제(Yoon SungJe) : Thank you so much for always helping me. July 18, 2025 at 1:56 PM, Mohammad Amir : You are most welcome! We are glad to help you ,feel free to ask anytime if you need any further assistance. July 18, 2025 at 2:10 PM, MCS/RTD System : Dear @FA , Please chcek M8MFA300_P25 is OOS servie that's why one job is pending. @Manufacturing, Please confirm are you producing this line or this LR is mistakenly called. Thank you very much! July 18, 2025 at 2:15 PM, 윤성제(Yoon SungJe) : Only 3 modules are being produced, so no materials are required. July 18, 2025 at 2:17 PM, Mohammad Amir : Thank you very much for confirming me. In this case ,I have cancelled this task and this endplate can be used in production for other producing lines ✅ July 18, 2025 at 2:26 PM, Alexandra : 2f cv031 product detect error, stop detect error July 18, 2025 at 2:32 PM, FACS_Wooseok Choi : Solved July 18, 2025 at 5:45 PM, FACS_Youngmin LEE : ■ 18th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 18, 2025 at 6:22 PM, Csanálosi Gábor FA : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.18. 11 Tech,+1 overtime 0SL Overtime(1): Szabadi Miklós Holiday(2): Szücs Géza Imre, Takács Ádám Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (2): Böröczki Balázs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert, --------------- Form/Modul(3): Boromisza Zolt July 18, 2025 at 6:37 PM, Niki (Modul) : Sziasztok! 2.emeleten a 3.gépnél az anyag megállt kifelejövet! July 18, 2025 at 6:40 PM, Gerbovits Kevin : Megyünk July 18, 2025 at 6:49 PM, Boromisza Zoltán : Kész July 18, 2025 at 7:24 PM, MCS/RTD System : @FA Please check M0STK022 Crane W/T in abort(double cargo) July 18, 2025 at 7:24 PM, Denkó Jani (F.A.) : Megyünk July 18, 2025 at 7:32 PM, Gerbovits Kevin : Solved July 19, 2025 at 5:23 AM July 19, 2025 at 5:23 AM, MCS/RTD System : @FA Please check M0CNV023-P21 Module assembly first line Port is out of service and carrier is waiting. July 19, 2025 at 5:24 AM, Denkó Jani (F.A.) : Checking July 19, 2025 at 5:28 AM, Denkó Jani (F.A.) : Solved July 19, 2025 at 5:42 AM, Kurkó Péter : Helló modul line1 nél az agv nem viszi a gantrybe a burkolatot Valaki nézzen rá pls July 19, 2025 at 5:42 AM, Kurkó Péter : Köszi July 19, 2025 at 6:08 AM, FA CS AGV Jawad : Solved already July 19, 2025 at 6:13 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2+1): Brázik János Csepi Árpád ———————————— July 19, 2025 at 7:04 AM, Alexandra : 2f out lift conveyor det error July 19, 2025 at 7:13 AM, Zoltán Harasztia FA : Kész July 19, 2025 at 9:53 AM, Mérei József : @Csepi Árpád 4Line nem viszi el a teli dunaget Kérlek nézd meg kösz July 19, 2025 at 10:09 AM, Alexandra : 2f cv027 stop detect error July 19, 2025 at 10:09 AM, Zoltán Harasztia FA : Már úton July 19, 2025 at 10:13 AM, Zoltán Harasztia FA : Kész July 19, 2025 at 10:16 AM, MCS/RTD System : @FA There is a job for M3MFA300_P32 but P32 is out of service. Please check. Thank you for July 19, 2025 at 10:23 AM, Zoltán Harasztia FA : Please delete the order. The material was called there by mistake. July 19, 2025 at 10:23 AM, MCS/RTD System : Order canceled. Thank you. July 19, 2025 at 10:41 AM, Alexandra : 2f cv041 stop detect error July 19, 2025 at 10:43 AM, Zoltán Harasztia FA : Úton July 19, 2025 at 10:47 AM, Zoltán Harasztia FA : Kész July 19, 2025 at 10:51 AM, MCS/RTD System : @FA Please check M0STK022_C01 "crane fork right collapse error " Thank you July 19, 2025 at 10:52 AM, Zoltán Harasztia FA : Cheking July 19, 2025 at 10:59 AM, FACS_오창훈_CHANGHOON : Solved July 19, 2025 at 1:08 PM, Alexandra : 2f in lift conveyor det error July 19, 2025 at 1:15 PM, Zoltán Harasztia FA : Solved July 19, 2025 at 1:17 PM, Alexandra : A hiba újra fennáll July 19, 2025 at 1:29 PM, Zoltán Harasztia FA : Kész July 19, 2025 at 2:10 PM, Alexandra : 2f cv031 product detect error July 19, 2025 at 2:12 PM, Csepi Árpád : The PM inspection of crane M0STK023 has started. The crane is in manual mode. July 19, 2025 at 2:20 PM, Zoltán Harasztia FA : This message was deleted. July 19, 2025 at 2:26 PM, Zoltán Harasztia FA : Kész July 19, 2025 at 2:28 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.19 2.Machine name : -M0STK28,38 3. Action detail : -Crane Wire check -We will switch to manual mode for about 10 minutes each to check the equipment. 4.Work time -Start : 14:30 -End : 5. Remark(special note) : July 19, 2025 at 2:35 PM, Csepi Árpád : The PM inspection of crane M0STK023 has been completed. The crane is in automatic mode. July 19, 2025 at 2:41 PM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.19 2.Machine name : -M0STK28,38 3. Action detail : -Crane Wire check -We will switch to manual mode for about 10 minutes each to check the equipment. 4.Work time -Start : 14:30 -End : 14:40 5. Remark(special note) : July 19, 2025 at 4:19 PM, Alexandra : 2. emeleten a lift előtt megint megállt az anyag a conveyor pályán July 19, 2025 at 4:19 PM, Zoltán Harasztia FA : Mindjárt megyünk July 19, 2025 at 4:29 PM, FACS_오창훈_CHANGHOON : Solved July 19, 2025 at 5:27 PM, FACS_Youngmin LEE : ■ 19th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 19, 2025 at 6:26 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.07.19. "B" műszak, 10Tech, 1OP, 1Sup, 1SL Overtime(0): Holiday(2): Takács Ádám, Gombos Norbert(OP) Sick(1): Gerbovits Kevin Shift Change(0): Translater: --------------- Electrode(4): Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, Böröczki Balázs NC Op: Nagy Sándor --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Formation/Modul(2): Denkó János, Boromissza Zoltán ------------ July 19, 2025 at 6:44 PM, Kurkó Péter : Hello pls check small agv s on line1 thx July 19, 2025 at 6:44 PM, FA-CS-AGV-Masoud : Coming July 19, 2025 at 6:47 PM, FA-CS-AGV-Masoud : Solved July 19, 2025 at 7:12 PM, Niki (Modul) : Sziasztok! 2.emelet CVO21 STOP DETECT ERROR July 19, 2025 at 7:18 PM, Denkó Jani (F.A.) : Megyünk

Chunk 258:
March 20, 2025 at 8:06 AM, Mohammad Amir invited duzzaman Md (MCS).
March 20, 2025 at 8:52 AM, 김대호 (Kim Dae Ho): Cathode No. 15 agv is stopped. There is no alarm.
March 20, 2025 at 8:54 AM, Czeilinger Krisztián: Going.
March 20, 2025 at 8:57 AM, Czeilinger Krisztián: Solved.
March 20, 2025 at 8:58 AM, Szabó Zoltán János: Szaisztok, Katod 5-6nal az agv ki allt hibara. Nem egyenes utat jar be, a kereknyomon lathato, hogy cikazik. Meg nezitek legyszives? Koszonom

Chunk 259:
March 20, 2025 at 9:02 AM, Mohammad Amir: @FA @Czeilinger Krisztián Is there any maintenance going on E0STKC31 ,it is open door error. Thank you!
March 20, 2025 at 9:05 AM, Szücs Géza FT-B: if the door is open and not have other error, the manufacturing working
March 20, 2025 at 9:05 AM, Mohammad Amir: Thank you very much for the confirmation!
March 20, 2025 at 9:06 AM, Czeilinger Krisztián: Ready
March 20, 2025 at 9:07 AM, Mohammad Amir: Thank you very much!

Chunk 260:
March 20, 2025 at 9:19 AM, Mohammad Amir: @Czeilinger Krisztián Please check E0CNVC51_08_046 there is Port interface Error. Thank you!
March 20, 2025 at 9:21 AM, Czeilinger Krisztián: Going
March 20, 2025 at 9:26 AM, Czeilinger Krisztián: Solved.
March 20, 2025 at 9:26 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 9:38 AM, Mohammad Amir: @Czeilinger Krisztián Please check E0CNVC51_08_046 there is Data Mismatch Error. Thank you!

Chunk 261:
March 20, 2025 at 9:43 AM, Szücs Géza FT-B: @Szarka Adrián szeva, mi a helyzet az AN press 3 -al? Mesben van rá anyag?
March 20, 2025 at 9:44 AM, Erik Gerzsenyi: Mesben van
March 20, 2025 at 9:52 AM, Szücs Géza FT-B: RBA1178 jó lenne nektek?
March 20, 2025 at 9:56 AM, Szücs Géza FT-B: bocs, nem találom sehol XD
March 20, 2025 at 9:57 AM, Szarka Adrián: Elvileg elfogyott. De most arra nincs ember hogy átnézze hogy tényleg így van e
March 20, 2025 at 9:59 AM, Czeilinger Krisztián: Solved.

Chunk 262:
March 20, 2025 at 9:59 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 10:06 AM, Szarka Adrián: Katod slitten nincs tálca
March 20, 2025 at 10:06 AM, Mohammad Amir: Checking
March 20, 2025 at 10:09 AM, Mohammad Amir: @Czeilinger Krisztián Please check LTC1355 located at E0CNVC51_08_043 it is not moving and blocking all the trays. Everything is good from MCS/RTD side. Thank you!

Chunk 263:
March 20, 2025 at 10:09 AM, Mohammad Amir: @Szarka Adrián this is the issue,i informed FA Team member. Thank you!
March 20, 2025 at 10:12 AM, Szarka Adrián: Anod slit 1 nincs AGV 15 perc
March 20, 2025 at 10:12 AM, Viktoriia Hleba: Sziasztok Anod slit 1 nincs AGV 15 perc
March 20, 2025 at 10:12 AM, Mohammad Amir: Checking
March 20, 2025 at 10:13 AM, Szücs Géza FT-B: @Rácz Dániel / FA megint a C51 3as lift rossz. de nincs hibaüzi
March 20, 2025 at 10:14 AM, Szücs Géza FT-B: légyszi nézd meg

Chunk 264:
March 20, 2025 at 10:14 AM, Mohammad Amir: There is no material available. Thank you!
March 20, 2025 at 10:14 AM, Mohammad Amir: There is no material available!
March 20, 2025 at 10:30 AM, Rácz Dániel / FA: Solved
March 20, 2025 at 10:30 AM, Viktoriia Hleba: 1 slitter cathode nincs tárca . Kérem, nézze meg.Köszönöm
March 20, 2025 at 10:30 AM, Rácz Dániel / FA: Mindjárt lesznek, most indultak el.
March 20, 2025 at 10:48 AM, Viktoriia Hleba: Anod slit 1 nincs AGV 15 perc

Chunk 265:
March 20, 2025 at 10:48 AM, Nagy Dávid 4: Anod slit 1 nincs AGV 15 perc help köszönöm szépen
March 20, 2025 at 10:49 AM, Rácz Dániel / FA: @amir
March 20, 2025 at 10:49 AM, Rácz Dániel / FA: Thx
March 20, 2025 at 10:50 AM, Mohammad Amir: We are receiving LR at 9:33 but as currently there is no material available that's why materials is not transferring for Slitter Anode -1. Thank you very much!
March 20, 2025 at 10:54 AM, Viktoriia Hleba: Cathode =№7 AGV STOP. Kérem, nézze meg. Köszönöm

Chunk 266:
March 20, 2025 at 10:59 AM, Viktoriia Hleba: Anod slit 2 nincs AGV 15 perc
March 20, 2025 at 10:59 AM, Mohammad Amir: Checking
March 20, 2025 at 10:59 AM, Viktoriia Hleba: thanks
March 20, 2025 at 11:00 AM, Mohammad Amir: Unfortunately even for Slitter -2 Anode there is no material. Thank you very much!
March 20, 2025 at 11:03 AM, Rácz Dániel / FA: This message was deleted.

Chunk 267:
March 20, 2025 at 11:08 AM, Mohammad Amir: @Czeilinger Krisztián Please check E0CNVC51(8179,8180) there is Group #1 Light Curtain error. Thank you!
March 20, 2025 at 11:11 AM, Mohammad Amir: @Rácz Dániel / FA Please check E0CNVA51_6216 there is AGV Forward asignal off error. Thank you!
March 20, 2025 at 11:11 AM, Szarka Adrián: Anod Slitt 1 re miért nem jön az agv ? Kerlek nézz rá
March 20, 2025 at 11:11 AM, Szarka Adrián: @Szücs Géza FT-B
March 20, 2025 at 11:11 AM, Czeilinger Krisztián: Going.

Chunk 268:
March 20, 2025 at 11:12 AM, Szücs Géza FT-B: poron vagyok, bocsi
March 20, 2025 at 11:14 AM, Szarka Adrián: 114889 méter van a raktárban. Van anyag a Slitt re
March 20, 2025 at 11:14 AM, Mohammad Amir: Checking
March 20, 2025 at 11:17 AM, Mohammad Amir: I checked for E1SLA020_P01 there is no material available currently. There are 17 materials however these materials can not be transferred to Slitter -2 Anode as it gets filter from BP_From_Press filter. Thank you!

Chunk 269:
March 20, 2025 at 11:26 AM, Czeilinger Krisztián: Ready
March 20, 2025 at 11:26 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 3:15 PM, Rácz Dániel / FA: EL GF AN AGV #5 nincs ACS kapcsolat
March 20, 2025 at 3:26 PM, Rácz Dániel / FA: EL GF AN AGV #24 nem lehet csatlakozni NavitrolMonitorral SSL hiba
March 20, 2025 at 3:28 PM, Koncz Tamás: EL GF CA AGV #22 Acs kapcsolat hiba
March 20, 2025 at 3:29 PM, Koncz Tamás: EL GF CA AGV # 21 Acs kapcsolat hiba

Chunk 270:
March 20, 2025 at 3:33 PM, Koncz Tamás: EL GF CA AGV # 13 Acs kapcsolat hiba
March 20, 2025 at 3:34 PM, Rácz Dániel / FA: EL GF AN AGV #14 ACS kapcsolat hiba
March 20, 2025 at 3:34 PM, Rácz Dániel / FA: EL GF AN AGV #25 ACS kapcsolat hiba
March 20, 2025 at 3:34 PM, Rácz Dániel / FA: EL GF AN AGV #13 ACS kapcsolat hiba
March 20, 2025 at 3:38 PM, Anton Mashchenko: Hello, come to cathode press 3, AGV 15 error! Thanks!
March 20, 2025 at 3:51 PM, Rácz Dániel / FA: Sokved

Chunk 271:
March 20, 2025 at 3:56 PM, Rácz Dániel / FA: Még mindig
March 20, 2025 at 3:58 PM, Rácz Dániel / FA: EL GF AN AGV #5 nem lehet csatlakozni NavitrolMonitorral SSL hiba
March 20, 2025 at 4:09 PM, Szücs Géza FT-B: El GF CA Roll AGV #2 - kapcsolódik, de megszakad, nem lehet térképre helyezni El GF Roll AGV#8 - ACS not connect
March 20, 2025 at 4:11 PM, Rácz Dániel / FA: Nekünk a tablet minden hol SSL hibát dob😞
March 20, 2025 at 4:29 PM, Pálosi Róbert: AGV 23,15,6,18,22 szintén nem csatlakozik fel.

Chunk 272:
March 20, 2025 at 4:36 PM, Pálosi Róbert: 26
March 20, 2025 at 4:43 PM, Czeilinger Krisztián: Szintén nem csatlakozik:-5 illetve. 24 AGV.
March 20, 2025 at 4:44 PM, Szücs Géza FT-B: 20
March 20, 2025 at 4:47 PM, Szücs Géza FT-B: coatingon vannak még AGVk
March 20, 2025 at 4:49 PM, Czeilinger Krisztián: EL GF AGV 21-nem csatlakozik.
March 20, 2025 at 4:57 PM, Czeilinger Krisztián: El GF CO AGV 20 no connection.
March 20, 2025 at 5:01 PM, Czeilinger Krisztián: El GF AGV 12 No connection

Chunk 273:
March 20, 2025 at 5:10 PM, Szücs Géza FT-B: 16 - teljesen le van merülve 9-es menni fog, hidd el

Chunk 274:
March 20, 2025 at 6:11 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás

Chunk 275:
March 20, 2025 at 6:28 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.20 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 20, 2025 at 8:45 PM, Sanyi: Hello anód Roll raktár 2es segítséget kérnék
March 20, 2025 at 9:30 PM, Karina Lyzanets: Sziasztok! Gyertek a Slitt Cathode 2 A tálca száma nem olvasható Köszönöm szépen☺️
March 20, 2025 at 10:12 PM, Karina Lyzanets: Gyertek légyszíves a Slitt Cathode 3 re, konvejor megállt

Chunk 276:
March 20, 2025 at 10:13 PM, Karina Lyzanets: Köszönöm
March 21, 2025 at 12:30 AM, Shahbaz 샤바즈 MCS/RTD: @FA Ca roll Warehouse C33, “Travel lag error occurred” Please check. Thanks
March 21, 2025 at 12:36 AM, Powder tréner: Sziasztok szeretnék kérni segítséget. Poron Katod oldalon air showerbe elakadt a 2 AGV.Az 1 AGV elakadt a 3 sornál.
March 21, 2025 at 12:42 AM, Karina Lyzanets: Slitt Cathode 2-3 nem jönnek a tálcák

Chunk 277:
March 21, 2025 at 12:45 AM, Mr.Miti (미티) FA: I checked! The trays are going, but the warehouse is slow.
March 21, 2025 at 12:50 AM, Karina Lyzanets: Köszönöm szépen
March 21, 2025 at 1:49 AM, Kurgya Attila: Sziasztok Ma éjszaka el fogunk indulni coatingon anod 1el. El vinnétek a sortól az ott parkoló agv-ket? Köszönöm
March 21, 2025 at 1:51 AM, Mr.Miti (미티) FA: Persze
March 21, 2025 at 1:55 AM, adambenczik: Azon kívül ami bent van a portban, van más is amit arrébb kéne tennünk?

Chunk 278:
March 21, 2025 at 1:56 AM, Kurgya Attila: Ami a sor előtt van azt is légyszíves
March 21, 2025 at 2:11 AM, adambenczik: Kész
March 21, 2025 at 3:04 AM, Sanyi: Sziasztok anód Roll raktár 5 segítséget kérek szépen
March 21, 2025 at 3:53 AM, Karina Lyzanets: Slitt Cathode 2-3 nem jönnek a tálcák
March 21, 2025 at 3:53 AM, Karina Lyzanets: 🥲🥲🥲
March 21, 2025 at 3:56 AM, Mr.Miti (미티) FA: Nézem!
March 21, 2025 at 3:57 AM, Mr.Miti (미티) FA: This message was deleted.

Chunk 279:
March 21, 2025 at 4:00 AM, Mr.Miti (미티) FA: Úton vannak. Kis türelem
March 21, 2025 at 10:43 AM, Oláh Rajmund: Sziasztok gyertek legyszives cathode roll raktárba
March 21, 2025 at 10:43 AM, Skwarek Tibor: Megyünk

Chunk 280:
March 21, 2025 at 6:22 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:10/13+2 Overtime Overtime (1): Pálosi Róbert, Csanálosi Gábor Sick (0):- Holiday (2): Magyar Balázs, Oláh András Shift change(1): Novák Zoltán Elektróda:(3) Szabadi Miklós, Kiss Balázs, Pálosi Róbert Assembly(6): GF: Novák Zoltán, Béki Norbert, Csanálosi Gábor 1F: Zsurbej Zsolt, Nagy Zsolt, Kasztel Balázs Modul(2): Martina Dávid, Nagy Gábor

Chunk 281:
March 21, 2025 at 6:50 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 21, 2025 at 7:00 PM, Varga Zoltán: Sziasztok poron anód oldalon megállt az AGV nézzétek meg légyszi
March 21, 2025 at 7:00 PM, Szabadi Miki: Rendben
March 21, 2025 at 9:09 PM, Varga Zoltán: Sziasztok poron anód oldalon megállt az AGV nézzétek meg légyszi ismét
March 21, 2025 at 9:09 PM, Szabadi Miki: Megyek

Chunk 282:
March 21, 2025 at 10:18 PM, Majláth Martin: Sziasztok! Catod roll raktárba szeretnék segítséget kérni. Köszönöm
March 21, 2025 at 10:19 PM, Kiss Balázs F.A.: Máris
March 21, 2025 at 10:19 PM, Majláth Martin: Köszii
March 21, 2025 at 10:20 PM, Turianytsia Olesia: Az AGV elakadt Cathode slitt 2
March 21, 2025 at 10:23 PM, Pálosi Róbert: Megyünk
March 21, 2025 at 10:27 PM, Majláth Martin: Megoldódott!
March 21, 2025 at 10:32 PM, Pálosi Róbert: Oks

Chunk 283:
March 21, 2025 at 10:55 PM, Somoskövy Martin: Sziasztok. Cathode Press 1-2 elött leparkolt 3 AGV keresztbe. Megnéznétek? Köszönöm.
March 21, 2025 at 10:59 PM, Szabadi Miki: Igen
March 21, 2025 at 11:03 PM, Szabadi Miki: 2 koreai nyomkodja őket nem tudom mit csinálnak anod oldalon is ezt csinálják
March 21, 2025 at 11:55 PM, Turianytsia Olesia: Nincs AGV 20 perc Cathode slitt 1
March 21, 2025 at 11:57 PM, Pálosi Róbert: Megnézem

Chunk 284:
March 22, 2025 at 12:05 AM, Pálosi Róbert: Nincsenek AGV-k feladatban.
March 22, 2025 at 12:11 AM, VK (mcs): Please check AGV 13 in front of roll STKC33
March 22, 2025 at 12:44 AM, Szabadi Miki: agv#13 úton van
March 22, 2025 at 1:18 AM, Turianytsia Olesia: A szállítószalag elakadt cathode slitt 1
March 22, 2025 at 1:23 AM, Dániel Hufnágel: Érkezünk
March 22, 2025 at 1:36 AM, Turianytsia Olesia: Nincs AGV 30 perc Cathode slitt 1

Chunk 285:
March 22, 2025 at 1:39 AM, VK (mcs): @FA Please check Cathode conveyor E0CNV C51 (8044)
March 22, 2025 at 2:33 AM, Turianytsia Olesia: Nincsenek tálcák cathode slitt 2
March 22, 2025 at 2:40 AM, Szabadi Miki: Megyünk
March 22, 2025 at 2:57 AM, Hári Zoltàn: Sziasztok! Legyszi gyertek es kapcsoljatok le az agv-ket a katod coatingon. Nem tudom mit kevernek itt de azon kivul h utban vannak es kerulgetni kell oket semmi hasznuk! Koszonom!

Chunk 286:
March 22, 2025 at 2:59 AM, Hári Zoltàn: Illetve nem tudom kinek a függősége, hogy a shift leader asztal elé parkolja le az agv-ket, de nem lenne rossz ha a 3-4-es sorokra vinnenk kikapcsolva őket mert ott nincsenek utban! Itt viszont igen! Elore is koszonom!
March 22, 2025 at 2:59 AM, Szabadi Miki: @Dániel Hufnágel
March 22, 2025 at 3:01 AM, Szabadi Miki: Megyünk
March 22, 2025 at 3:01 AM, Hári Zoltàn: Hála! :)

Chunk 287:
March 22, 2025 at 3:02 AM, Dániel Hufnágel: Ha ilyen van szólj nyugodtan minél előbb, felesleges kerülgetni ha nem használjátok őket
March 22, 2025 at 3:03 AM, Hári Zoltàn: Rendben!
March 22, 2025 at 5:04 AM, Turianytsia Olesia: A szállítószalag elakadt cathode slitt 2
March 22, 2025 at 5:05 AM, Kiss Balázs F.A.: Okés
March 22, 2025 at 5:05 AM, Kiss Balázs F.A.: Megyek
March 22, 2025 at 12:31 PM, Yanina: Sziasztok) Cathode slitt 1 nincs AGV 40p.

Chunk 288:
March 22, 2025 at 12:33 PM, Shakir (MCS): LR has been received at 11:39 but there is No lot available Thank you
March 22, 2025 at 2:56 PM, 김대호 (Kim Dae Ho): Can I check how many rolls can be returned to Anode Press 3 and 4? @Shakir (MCS)
March 22, 2025 at 2:59 PM, Shakir (MCS): For Press 3 : 6 For Press 4 : 6 Lot available
March 22, 2025 at 3:00 PM, 김대호 (Kim Dae Ho): Thank you for your reply.
March 22, 2025 at 5:04 PM, 김대호 (Kim Dae Ho): Cathode 21 agv is stopped without alarm Please check it out.

Chunk 289:
March 22, 2025 at 5:06 PM, Farkas Tamàs: waiting for AGV #6
March 22, 2025 at 5:10 PM, Farkas Tamàs: Korean colleague working on AGV #22. It's blocking traffic
March 22, 2025 at 6:03 PM, Turianytsia Olesia: Nincs AGV 30 perc Cathode slitt 1
March 22, 2025 at 6:06 PM, Szabadi Miki: Megyünk

Chunk 290:
March 22, 2025 at 6:07 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Hufnágel Dániel Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs
March 22, 2025 at 6:12 PM, Szabadi Miki: @VK (mcs) please check this

Chunk 291:
March 22, 2025 at 6:15 PM, VK (mcs): Last LR was at 11:39 Reply is no available material
March 22, 2025 at 6:19 PM, Szabadi Miki: Thank you
March 22, 2025 at 7:14 PM, Csicskovics Balázs: @Szabadi Miki merre vagy megtalálható?
March 22, 2025 at 7:14 PM, Szabadi Miki: Por
March 22, 2025 at 7:14 PM, Szabadi Miki: Miért ?
March 22, 2025 at 7:17 PM, Csicskovics Balázs: Köszi már van akivel tudom intézni!

Chunk 292:
March 22, 2025 at 7:19 PM, Dániel Hufnágel: @VK (mcs) Good evening! Can you check me why operators can not take out from storages Ford material by RTD? Maybe it has some status problem.
March 22, 2025 at 7:20 PM, VK (mcs): Can you please tell me, to which equipment?
March 22, 2025 at 7:21 PM, Csicskovics Balázs: Cathode press 1
March 22, 2025 at 7:25 PM, VK (mcs): Well as I checked there are no available material
March 22, 2025 at 7:36 PM, Dániel Hufnágel: They see material for ford lines

Chunk 293:
March 22, 2025 at 7:36 PM, Dániel Hufnágel: Maybe is there any MES data problem?
March 22, 2025 at 7:37 PM, VK (mcs): Well I am not sure about MES part
March 22, 2025 at 7:43 PM, VK (mcs): Can you tell me some carrier id? Cus as I see for example: RBC0403 in STK 31 shelf is out of service, so it's not possible to transfer. RBC1284 also same problem.
March 22, 2025 at 7:45 PM, VK (mcs): All 24 carriers, have same issue!

Chunk 294:
March 22, 2025 at 7:57 PM, Fónagy Péter: What does it mean exactly that they are "out of service"?
March 22, 2025 at 7:57 PM, VK (mcs): Shelf is out of service
March 22, 2025 at 7:58 PM, Fónagy Péter: It means the machine or sensor has some physical issue?
March 22, 2025 at 7:58 PM, Fónagy Péter: Or that it's physically empty, just the system shows some roll there?
March 22, 2025 at 8:01 PM, VK (mcs): Well, it is possible to answer with the @FA team, or @SCS members, why shelf is banned

Chunk 295:
March 22, 2025 at 9:17 PM, Majláth Martin: Sziasztok! Catod press 4 RW robotot kar nem veszi le a rollt Tudtok segíteni? Köszi
March 22, 2025 at 9:17 PM, Kiss Balázs F.A.: Poron vagyunk, majd érkezünk valamikor
March 23, 2025 at 12:29 AM, Somoskövy Martin: Sziasztok. Cathode Press 3 melletti töltőállomásnál kiállt a 21-es AGV hibára és miatta torlódás van. Megnéznétek? Köszönöm.
March 23, 2025 at 12:30 AM, Szabadi Miki: This message was deleted.

Chunk 296:
March 23, 2025 at 12:31 AM, Szabadi Miki: Már megy is
March 23, 2025 at 6:43 AM, Mohammad Amir: @FA @Szabadi Miki Please check E0STKC51_C02 MCP AP Error. Thank you very much!

Chunk 297:
March 23, 2025 at 6:45 AM, Farkas Tamàs: Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibi Viczai Tomi ———————————— Assembly 1F(4) Fabricius Gergő Nagy Tamás Gégény Dávid Simon Attila ———————————— Assembly GF(3) Csuti Zoltán Lajos Gábor Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoli
March 23, 2025 at 6:45 AM, Mohammad Amir: @Marsi Gábor please check this issue.

Chunk 298:
March 23, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.23 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 23, 2025 at 7:27 AM, Yanina: Sziasztok) Cathode slitt 3 transzfer probléma U/W
March 23, 2025 at 7:27 AM, Skwarek Tibor: Megyünk
March 23, 2025 at 7:35 AM, Marsi Gábor: Kész
March 23, 2025 at 7:41 AM, Mohammad Amir: This message was deleted.

Chunk 299:
March 23, 2025 at 7:41 AM, Mohammad Amir: @Marsi Gábor Please check LTC0138 located at E0STKC51_C01 it is not moving since 7:04 and that is why other carriers waiting on the CNVC51. I checked everything good from MCS side . Please check physically. Thank you very much!
March 23, 2025 at 8:32 AM, Mohammad Amir: @Marsi Gábor Please check E0STKC52_C02 there is Load Oversize Error(Right). Thank you!

Chunk 300:
March 23, 2025 at 11:51 AM, 조혜근: @FA We proceeded with the UW LOAD REQ of anode slitter unit 3, but the roll is not coming. Please check. Rolls exist in the warehouse
March 23, 2025 at 11:51 AM, Mohammad Amir: Checking
March 23, 2025 at 11:53 AM, Mohammad Amir: There is a job exists already to Slitter Anode -3 U/W. I am checking the reason for delay. Thank you!
March 23, 2025 at 11:55 AM, 조혜근: Yes, I've already requested it, but I've been waiting for 50 minutes

Chunk 301:
March 23, 2025 at 11:56 AM, Mohammad Amir: @Marsi Gábor Please check E0STKA34_P01 there is material RBA0108 exists . And because of this material roll is not coming for Slitter Anode -3 as it is blocking transfer. Thank you very much!
March 23, 2025 at 11:57 AM, Mohammad Amir: Yes sir, There is a carrier exists on E0STKA34_P01 that's why Roll is not coming for Slitter. I have already informed FA responsible person. I am monitoring. Thank you very much!
March 23, 2025 at 11:57 AM, 조혜근: Thank you

Chunk 302:
March 23, 2025 at 11:58 AM, Mohammad Amir: You are welcome Sir.
March 23, 2025 at 11:59 AM, Mohammad Amir: @Marsi Gábor Also,Please remove RBA1521 located at E0STKA34_M01 ,it is blocking all the transfers. Thank you very much!
March 23, 2025 at 12:12 PM, Mohammad Amir: Issue has been resolved Sir . ✅ AGV #11 on the way with Roll RBA2388. Thank you very much!
March 23, 2025 at 12:25 PM, Mohammad Amir: Roll RBA2388 has successfully arrived at Slitter Anode 3-P01 at 12:24. ✅ Thank you very much!

Chunk 303:
March 23, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (1):Csanálosi Gábor Sick (0):- Holiday (2):Kiss Balázs , Zsurbej Zsolt Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Hufnágel Dániel Assembly(6): GF: Novák Zoltán, Csanálosi Gábor, Béki Norbert 1F: Kasztel Balázs, Novák Károly, Nagy Zsolt Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs
March 23, 2025 at 6:59 PM, Somoskövy Martin: Sziasztok. Cathode Press 5 R/W-hez tudna valaki jönni?

Chunk 304:
March 23, 2025 at 7:02 PM, Szabadi Miki: Igen megyünk
March 24, 2025 at 6:10 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.24 Time:06:00-18:00 1. Jung woojun 2. Baek hojong Köszönöm szépen
March 24, 2025 at 6:28 AM, Kurgya Attila: Sziasztok. Ma a coatingos létszámhelyzet miatt, szeretnénk használni az anod 1es termeléshez az agv-ket. Szeretnék kérni ezzel a kapcsolatban véleményt a részetekről. Köszönöm

Chunk 305:
March 24, 2025 at 6:40 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 306:
March 24, 2025 at 6:51 AM, Powder tréner: Sziasztok,segitséget szeretnék kérni.Katód 2 poron megállt 2es AGV.
March 24, 2025 at 6:58 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.24 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 24, 2025 at 8:25 AM, 박태영: From today, any changes to RTD and MCS related logic cannot be made without Park Taeyoung PM's approval.

Chunk 307:
March 24, 2025 at 9:09 AM, Karina Lyzanets: Sziasztok! Gyertek légyszives a Slitt Cathode 3 re, konvejor megállt
March 24, 2025 at 9:09 AM, Karina Lyzanets: Köszönöm☺️
March 24, 2025 at 9:13 AM, gutenkunstabelzoltan: Kesz
March 24, 2025 at 9:22 AM, Mohammad Amir: @adambenczik Please check E0CNVC51 (8046) there is Port interface Error. Thank you!
March 24, 2025 at 9:41 AM, 유병일: @서지원 피엠님 메일드린것처럼 금일부터 코터 생산 중 agv 상시 투입하도록 하겠습니다. 현장 준비되고 투입 시작할때 공지 한번 더 드리겠습니다!

Chunk 308:
March 24, 2025 at 9:54 AM, 서지원: 네 알겠습니다!!
March 24, 2025 at 10:53 AM, Mohammad Amir: @FA @gutenkunstabelzoltan Please check E0STKA35_M01 there is Data_Off,Sensor on overtime error. Thank you!
March 24, 2025 at 10:58 AM, Baek Hojong(백호종)FA: Solved
March 24, 2025 at 11:00 AM, Mohammad Amir: Thank you very much!
March 24, 2025 at 11:06 AM, Szeitz Flórián: Sziasztok! Katód press 4 U/W leszedő robot megállt. Légyszives nézzétek meg. Köszönöm
March 24, 2025 at 11:07 AM, adambenczik: Megyek

Chunk 309:
March 24, 2025 at 11:30 AM, adambenczik: Kész
March 24, 2025 at 11:31 AM, Szeitz Flórián: Köszi
March 24, 2025 at 11:53 AM, Mohammad Amir: @FA @adambenczik Please check E0CNVC12_RTV01 is in Manual mode that's why few jobs are Alternated. Thank you very much!
March 24, 2025 at 11:55 AM, gutenkunstabelzoltan: Megyek
March 24, 2025 at 11:55 AM, Mohammad Amir: Thank you very much!
March 24, 2025 at 12:05 PM, gutenkunstabelzoltan: There is a guy who eorkink on it. Maybe maintaining something….

Chunk 310:
March 24, 2025 at 12:05 PM, gutenkunstabelzoltan: Working*
March 24, 2025 at 12:40 PM, Kurgya Attila: Sziasztok Tudnátok jönni anod 1hez? A 2es R/Whez nem akar érkezni agv.
March 24, 2025 at 12:41 PM, gutenkunstabelzoltan: Megyunk
March 24, 2025 at 12:41 PM, Mr.Miti (미티) FA: Megy már az agv
March 24, 2025 at 12:47 PM, Szeitz Flórián: Sziasztok! Press 3 -nàl kiállt a 9es AGV hibára. Légyszives nézzétek meg. Köszönöm

Chunk 311:
March 24, 2025 at 12:47 PM, Mr.Miti (미티) FA: Nincs véletlenül valami az útjában ? Mert nekem azt jelzi 🥹
March 24, 2025 at 12:48 PM, Szeitz Flórián: Töltő állomás, press 3as gép. 😅
March 24, 2025 at 12:49 PM, Szeitz Flórián: Más nincs mellette.
March 24, 2025 at 12:49 PM, gutenkunstabelzoltan: Nezem
March 24, 2025 at 12:49 PM, gutenkunstabelzoltan: Megy
March 24, 2025 at 1:12 PM, Powder tréner: Poron Katód air showerben elakadt az AGV. S.O.S

Chunk 312:
March 24, 2025 at 1:18 PM, Szeitz Flórián: Sziasztok! Katód Roll raktár 3 stokerbe kint maradt a daru villa . 90. Fork1 center error when first active hibára kiállt. Légyszives nézzétek meg köszönöm
March 24, 2025 at 1:42 PM, 조혜근: @FA An error occurred in the negative roll warehouse No. 3. Please check. Travel Lag Error
March 24, 2025 at 1:42 PM, 조혜근: Cathode

Chunk 313:
March 24, 2025 at 2:39 PM, Mohammad Amir: @FA @adambenczik Please check E0CNVC12_RTV01 is in Manual mode that's why one job is Alternated. Thank you very much!
March 24, 2025 at 2:40 PM, gutenkunstabelzoltan: Somebody working on it !
March 24, 2025 at 2:40 PM, Mohammad Amir: Thank you very much!
March 24, 2025 at 2:40 PM, 유병일: @서지원 @KIM SEYEON [김세연]_FA 피엠님 음극 코터 롤, 포일 agv 생산투입 시작했습니다!

Chunk 314:
March 24, 2025 at 3:06 PM, Mohammad Amir: @gutenkunstabelzoltan Please check E0CNVC12_P07 there is Data loss Error. Thank you very much!
March 24, 2025 at 3:10 PM, Mohammad Amir: @FA Please check this issue one job for powder material has stopped. Thank you!
March 24, 2025 at 3:45 PM, gutenkunstabelzoltan: The guy who worked on the cv finished?
March 24, 2025 at 4:09 PM, 조혜근: 롤창고 에러 리셋하려고하는데 비밀번호 아시는분 계신가요?
March 24, 2025 at 4:09 PM, 조혜근: 기존에 도어 오픈 비밀번호 입력이 안됩니다

Chunk 315:
March 24, 2025 at 4:09 PM, 조혜근: 날짜+시간
March 24, 2025 at 5:04 PM, Mohammad Amir: @gutenkunstabelzoltan Please check E0STKC12_C01 there is Hoist Time over error. Thank you!

Chunk 316:
March 24, 2025 at 6:22 PM, Szücs Géza FT-B: Jó estét! Good morning! "B" műszak, 8+3/11(+1) Tech, 1Sl Overtime(3): Novák Zoltán, Novák Károly, Béki Norbert Holiday(3+1): Czeilinger Krisztián, Gerbovits Kevin, Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Novák Zoltán, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Pintye Miklós László, Béki Norbert --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János ----

Chunk 317:
March 24, 2025 at 6:30 PM, Pintér Gábor: Jó estét van valami info a coating foil stocker #2 miért nem működik? 1db foliánk van és nem terveztünk megállni a sorral
March 24, 2025 at 6:33 PM, Szücs Géza FT-B: nézzük
March 24, 2025 at 6:36 PM, Pintér Gábor: Köszönjük😇
March 24, 2025 at 6:55 PM, Pálosi Róbert: visszakapcsoltam a stka-02 - t
March 24, 2025 at 6:56 PM, Pintér Gábor: Köszi
March 24, 2025 at 7:23 PM, Anton Mashchenko: Hello, cathode press 3, AGV 9 position error! Help! Thanks!

Chunk 318:
March 24, 2025 at 7:23 PM, Pálosi Róbert: Megyünk
March 24, 2025 at 7:27 PM, Pálosi Róbert: Kész
March 24, 2025 at 7:35 PM, Varga Tamás Powder: Sziasztok Poron anód air showderben elakadt az AGV. Megtudnátok nézni? Köszönöm
March 24, 2025 at 7:35 PM, Szücs Géza FT-B: megyünk, még C11 STKnál vagyunk
March 24, 2025 at 7:43 PM, Szücs Géza FT-B: a poros hibákat a másik csoportba szoktuk

Chunk 319:
March 24, 2025 at 8:03 PM, Szabó Zoltán János: Annyi csoport van mar, hogy legyen ember a talpan aki ezt kovetni tudja, mit hova lehet es kell irni.
March 24, 2025 at 8:40 PM, Szücs Géza FT-B: sárga az electroda Coat/ Press/slitt a szürke meg electroda por, szürke, mint a por
March 24, 2025 at 11:01 PM, Nagy Dávid 4: Anod roll raktár E0STKA31 raktár daru kiált hibára help help köszönöm szépen
March 24, 2025 at 11:03 PM, Pálosi Róbert: Megyünk
March 24, 2025 at 11:10 PM, Pálosi Róbert: Kész

Chunk 320:
March 25, 2025 at 12:25 AM, Pintér Gábor: Sziasztok anód 1-en agv probléma szeretnénk segítséget kérni
March 25, 2025 at 12:29 AM, Szücs Géza FT-B: Press? Slitt? Coater? Roll raktár? Por?
March 25, 2025 at 12:30 AM, Szappanos Gábor: Coating
March 25, 2025 at 12:31 AM, Pintér Gábor: Coating anód 1-es sor
March 25, 2025 at 12:31 AM, Szücs Géza FT-B: @Pálosi Róbert , @Rácz Dániel / FA légyszives szakértsétek meg, köszönöm szépen.

Chunk 321:
March 25, 2025 at 12:47 AM, Anton Mashchenko: Cathode press 4, AGV not coming 20 min! Help! Thanks!
March 25, 2025 at 12:51 AM, Shahbaz 샤바즈 MCS/RTD: Currently no lot available for Ca press #04
March 25, 2025 at 12:53 AM, Anton Mashchenko: This message was deleted.
March 25, 2025 at 12:55 AM, Shahbaz 샤바즈 MCS/RTD: This message was deleted.
March 25, 2025 at 2:31 AM, Nagy Dávid 4: Katod slitt 3 nincsen TRAY ID help help köszönöm szépen
March 25, 2025 at 2:33 AM, Nagy Dávid 4: TRANSFER TO EQ

Chunk 322:
March 25, 2025 at 2:36 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check E0STKA32 is OutOfService having " SCP Main Power CP Trip" Thank you
March 25, 2025 at 2:37 AM, Csanálosi Gábor FA: Kész
March 25, 2025 at 2:38 AM, Csanálosi Gábor FA: Jövök
March 25, 2025 at 2:41 AM, Csanálosi Gábor FA: Done
March 25, 2025 at 3:42 AM, Szücs Géza FT-B: @Rácz Dániel / FA @Pálosi Róbert CNVA51 , a tele reelek a slitt 2 mögött megakadtak. Pls Pls help p
March 25, 2025 at 3:43 AM, Rácz Dániel / FA: C34 után ott vagyunk

Chunk 323:
March 25, 2025 at 3:44 AM, Nagy Dávid 4: Anod conveer stop help help köszönöm szépen
March 25, 2025 at 3:45 AM, Rácz Dániel / FA: Jövünk
March 25, 2025 at 3:51 AM, Rácz Dániel / FA: Kész
March 25, 2025 at 4:19 AM, Viktor Vadas: Sziasztok! Anod Jumbo raktarban a 2-es raktarhoz szeretnenk segitseget kerni, ujrainditasra lenne szuksegunk.
March 25, 2025 at 4:20 AM, Rácz Dániel / FA: Jövünk
March 25, 2025 at 4:25 AM, Rácz Dániel / FA: Kész

Chunk 324:
March 25, 2025 at 5:19 AM, Nagy Dávid 4: Anod roll raktárban 2 számú agv kiált hibára help help köszönöm szépen
March 25, 2025 at 5:59 AM, Kurgya Attila: Sziasztok Anod 1hez gyertek légyszíves. 2es agv kiállt hibára a legrosszabb helyen ahol lehet. Köszönöm
March 25, 2025 at 6:01 AM, Marsi Gábor: Megyek

Chunk 325:
March 25, 2025 at 6:07 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 326:
March 25, 2025 at 6:41 AM, Powder tréner: Sziasztok,szeretnék kérni segítséget,powder Katód air showerben elakadt az AGV.
March 25, 2025 at 6:42 AM, gutenkunstabelzoltan: Megyek
March 25, 2025 at 6:51 AM, Kurgya Attila: Sziasztok Szeretnénk megpróbálni katod 1hez az agv-ket. Van akadálya?
March 25, 2025 at 6:58 AM, Mr.Miti (미티) FA: Elméletileg nincs
March 25, 2025 at 6:58 AM, Mr.Miti (미티) FA: Próbáljátok
March 25, 2025 at 7:02 AM, gutenkunstabelzoltan: Kesz

Chunk 327:
March 25, 2025 at 7:39 AM, Powder tréner: Sziasztok,szeretnék kérni segítséget,powder Katód air showerben elakadt az AGV.
March 25, 2025 at 7:40 AM, Powder tréner: Megint
March 25, 2025 at 7:43 AM, Marsi Gábor: Megyek
March 25, 2025 at 7:43 AM, Mr.Miti (미티) FA: Köszönöm!
March 25, 2025 at 7:51 AM, Marsi Gábor: Kész

Chunk 328:
March 25, 2025 at 8:20 AM, Annau András: Sziasztok! RTD felhasználók alaphelyzetbe állításában nem tudom ki az illetékes, de legyen kedves az electrode1 electrode2 fióknál a jelszót alaphelyzetbe állítani. Köszönöm.
March 25, 2025 at 8:21 AM, Sazzad Bhai SKon: Checking
March 25, 2025 at 8:24 AM, duzzaman Md (MCS): Resetted. Please use the default password for both.
March 25, 2025 at 8:33 AM, adambenczik: @Mohammad Amir E1SLC010 and E1PRC040 waiting roll. Is there no material is warehouse?

Chunk 329:
March 25, 2025 at 8:34 AM, duzzaman Md (MCS): Checking
March 25, 2025 at 8:38 AM, duzzaman Md (MCS): Both no materials available
March 25, 2025 at 8:38 AM, adambenczik: Okey, thank you
March 25, 2025 at 8:39 AM, Mr.Miti (미티) FA: Ca slitt 1-re manuálisan fognak anyagot vinni közvetlen a pressről
March 25, 2025 at 8:54 AM, Kurgya Attila: Sziasztok Katod 1re tudtok jönni?
March 25, 2025 at 9:33 AM, 류종석(RyuJongSeok): 코팅 양극1라인 봐주세요

Chunk 330:
March 25, 2025 at 9:56 AM, Szeitz Flórián: Anód Slitt 1 megállt a leszedő robot légyszives nézzétek meg. Köszönöm
March 25, 2025 at 10:20 AM, Mohammad Amir: @FA @adambenczik Please check E0CNVA12_P07 there is INV-01 error and it is blocking powder material transfer. Thank you very much!
March 25, 2025 at 10:21 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0CNVA51_6183 and 6184 there is Group #1 Light Curtain 01 Detected error. Thank you very much!

Chunk 331:
March 25, 2025 at 10:24 AM, Mr.Miti (미티) FA: On 1F AN someone working
March 25, 2025 at 10:24 AM, Mohammad Amir: Thank you very much!
March 25, 2025 at 10:39 AM, Szarka Adrián: Anod roll raktárában a 20 agv megállt
March 25, 2025 at 10:39 AM, Szarka Adrián: Gyertek kerlek. Köszi
March 25, 2025 at 10:40 AM, Mohammad Amir: @Mr.Miti (미티) FA Please check this issue because of this One job is pending. Thank you very much!

Chunk 332:
March 25, 2025 at 11:02 AM, Mr.Miti (미티) FA: there is still someone working on it
March 25, 2025 at 11:55 AM, 배일명: 음1 avg 2nd 쪽 알람 발생 후정지하였습니다
March 25, 2025 at 11:56 AM, 배일명: 현지 테크니션 점검 중입니다
March 25, 2025 at 11:59 AM, 배일명: 조치 완료 되었습니다
March 25, 2025 at 12:02 PM, Karina Lyzanets: Sziasztok! Gyertek légyszives a Slitt Cathode 2 re
March 25, 2025 at 12:03 PM, Karina Lyzanets: Köszönöm

Chunk 333:
March 25, 2025 at 12:07 PM, Mohammad Amir: @Fa @Mr.Miti (미티) FA Please check LTC0277 located at E0STKC51_P03 it is not moving and blocking Other carriers. Thank you!
March 25, 2025 at 12:23 PM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STKC13_C01 there is Light Curtain detected error since 11:34. Thank you very much!
March 25, 2025 at 12:24 PM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STKC12_C01 there is Fork #1 Load Position Error when Active. Thank you very much!

Chunk 334:
March 25, 2025 at 12:24 PM, Mohammad Amir: @FA @adambenczik Please check E0STKC11_C01 there is light curtain-01 detected error. Thank you very much!
March 25, 2025 at 12:38 PM, Szeitz Flórián: Sziasztok! Katód press 1-2 előtt parkoló AGV -et (21,17)kérném arréb vinni . ( Nem azt mondom kapcsoljatok ki ,hanem ,hogy ne itt parkoljanak) Mert a manuàlis szállítás miatt útban vannak . Köszönöm

Chunk 335:
March 25, 2025 at 12:43 PM, Mohammad Amir: @adambenczik Please check this issue it is causing traffic on the CNVC51. Thank you very much!
March 25, 2025 at 12:50 PM, 류종석(RyuJongSeok): 코팅 음극1라인 agv 오류 발생 했습니다.
March 25, 2025 at 12:52 PM, 류종석(RyuJongSeok): 헝가리 대응 작업자 상주 하는거 아니였나요?
March 25, 2025 at 12:57 PM, 유병일: @Mr.Miti (미티) FA please check the anode coater 1line agv now. @Baek Hojong(백호종)FA 피엠님 확인 한번 부탁드리겠습니다
March 25, 2025 at 12:57 PM, 류종석(RyuJongSeok): 조치 완료 되었습니다.

Chunk 336:
March 25, 2025 at 12:59 PM, Mr.Miti (미티) FA: The problem, E0STKC51_P03_OP01 LTC1915. there is no order for this. please generate job
March 25, 2025 at 1:00 PM, Mohammad Amir: Checking
March 25, 2025 at 1:01 PM, Mr.Miti (미티) FA: Thank you!
March 25, 2025 at 1:04 PM, Mohammad Amir: Location has been updated ✅ And job has been created to the STKC51. Monitoring the transfer. Thank you very much!
March 25, 2025 at 1:05 PM, Mr.Miti (미티) FA: Thank you too!

Chunk 337:
March 25, 2025 at 1:05 PM, Mohammad Amir: You are welcome!
March 25, 2025 at 1:06 PM, Mohammad Amir: Now all carriers have started to move ✅. Thank you very much!
March 25, 2025 at 1:46 PM, Balogh Ádám: Sziasztok katod poron a raktar nem adja ki az anyagot megtudnátok nezni ?
March 25, 2025 at 1:47 PM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0CNVC12_RTV01 there is Stop2 Run Time over alaram. Thank you very much!

Chunk 338:
March 25, 2025 at 1:48 PM, Mohammad Amir: It is blocking powder material transfer.
March 25, 2025 at 1:50 PM, Mr.Miti (미티) FA: Igem
March 25, 2025 at 1:50 PM, Mr.Miti (미티) FA: Nincs ott egy fel tucat koreai aki dolgozik a raktaraknal?
March 25, 2025 at 1:57 PM, Balogh Ádám: De voltak de eltűntek pont amikor kellenének 😅
March 25, 2025 at 1:58 PM, Mr.Miti (미티) FA: És otthagytak mindent pirosba
March 25, 2025 at 2:01 PM, Balogh Ádám: Most jelentek meg, megpróbálunk akkor velük dűlőre jutni

Chunk 339:
March 25, 2025 at 2:06 PM, Mr.Miti (미티) FA: Igen
March 25, 2025 at 2:06 PM, Mr.Miti (미티) FA: Most hogy vissza nyomtam a raktárat itt is megjelentek
March 25, 2025 at 2:19 PM, duzzaman Md (MCS): @Mr.Miti (미티) FA @Fa Please check E0STKC52_CO2 There is loads oversize error.
March 25, 2025 at 2:54 PM, Szeitz Flórián: Sziasztok! Anód Slitt 3ra 25 perce nem jön az anyag az U/W-rw , illetve a R/W leszedő robot megállt.

Chunk 340:
March 25, 2025 at 2:56 PM, Mohammad Amir: Please press LR for Slitter Anode -3 P01. Thank you very much!
March 25, 2025 at 2:58 PM, Szeitz Flórián: Load REQ. Benyomva.
March 25, 2025 at 2:59 PM, Mohammad Amir: Sorry we didn't receive LR ,Press Again. Thank you!
March 25, 2025 at 3:00 PM, Mr.Miti (미티) FA: @Mohammad Amir STKC35. the mcs indicates that the material is on the crane but no. Please check.
March 25, 2025 at 3:00 PM, Szeitz Flórián: Kikapcsoltam és újra benyomtam .

Chunk 341:
March 25, 2025 at 3:00 PM, Mohammad Amir: Checking
March 25, 2025 at 3:00 PM, Mr.Miti (미티) FA: Thank you sir!
March 25, 2025 at 3:00 PM, Mohammad Amir: We didn't Receive please try again. Thank you!
March 25, 2025 at 3:00 PM, Mohammad Amir: You are welcome!
March 25, 2025 at 3:05 PM, Mohammad Amir: Crane started to Move ,RBC0907 on it ✅. Thank you very much!
March 25, 2025 at 3:06 PM, Mohammad Amir: LR received successfully at 15:04. Carrier RBA0098 on the way ✅. Thank you very much!

Chunk 342:
March 25, 2025 at 3:06 PM, adambenczik: 5-ös számú AGV most veszi át a raktárból az anyagot
March 25, 2025 at 3:06 PM, Mr.Miti (미티) FA: Thank you
March 25, 2025 at 3:07 PM, Mr.Miti (미티) FA: @Szeitz Flórián megy az anyag anode slitt3ra
March 25, 2025 at 3:07 PM, Mohammad Amir: You are welcome!
March 25, 2025 at 3:09 PM, Szeitz Flórián: Köszönöm
March 25, 2025 at 3:22 PM, 조혜근: @FA Rolls are not coming to the UW of anode slitter unit 3. Please check it

Chunk 343:
March 25, 2025 at 3:22 PM, Sazzad Bhai SKon: Checking
March 25, 2025 at 3:23 PM, Mr.Miti (미티) FA: Agv is on the way
March 25, 2025 at 3:31 PM, Mohammad Amir: @Mr.Miti (미티) FA Please check E0STKA32_P01 it is OOS that's why Roll is not going to Slitter -3 Anode. Thank you very much!
March 25, 2025 at 3:33 PM, Mr.Miti (미티) FA: Yes im here. One Korean are working on it. 🤷‍♂️
March 25, 2025 at 3:33 PM, Mohammad Amir: Thank you very much!

Chunk 344:
March 25, 2025 at 3:33 PM, Mr.Miti (미티) FA: but today this is the setup for the whole factory
March 25, 2025 at 3:33 PM, Mr.Miti (미티) FA: You’re welcome sir! 🙏
March 25, 2025 at 3:33 PM, Mohammad Amir: Alright,Noted. Thank you very much for the information!
March 25, 2025 at 3:34 PM, Mohammad Amir: You are welcome!
March 25, 2025 at 4:55 PM, Karina Lyzanets: 1-2 Slitt Cathode nincs AGV 20 perc
March 25, 2025 at 4:55 PM, Mohammad Amir: Checking

Chunk 345:
March 25, 2025 at 4:55 PM, adambenczik: Slitt 1-re már érkezik
March 25, 2025 at 4:56 PM, Mohammad Amir: For Slitter one AGV#6 on teb way. Thank you very much!
March 25, 2025 at 4:57 PM, Mohammad Amir: For Slitter -2 Cathode currently there is no material available. Thank you very much!

Chunk 346:
March 25, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 6+5/11(+1) Tech, 1Sl Overtime(5): Novák Zoltán, Novák Károly, Kasztel Balázs, Zsurbej Zsolt, Nagy Zsolt Holiday(5+1): Czeilinger Krisztián, Gerbovits Kevin, Kovács Ágnes, Pálosi Róbert,Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Kasztel Balázs --------------- Assy GF (3): Novák Zoltán, Novák Károly, Pintye Miklós --------------- Assy 1F (3): Böröczki Balázs, Zsurbej Zsolt, Nagy Zsolt --------------- Form

Chunk 347:
March 25, 2025 at 6:52 PM, Viktoriia Hleba: Cathode slitt 1 nincs AGV. 15 perc .
March 25, 2025 at 6:55 PM, Shahbaz 샤바즈 MCS/RTD: Currently there is no roll available for Ca Slitter 1.
March 25, 2025 at 6:59 PM, Erik Gerzsenyi: Erre raneztek legyszi? 25 perce varunk qz AGV-re
March 25, 2025 at 7:00 PM, Erik Gerzsenyi: Raktarban van bent 73.000 meter

Chunk 348:
March 25, 2025 at 7:11 PM, 카스텔 발라지 F.A.: Elképzelhető hogy az a 73'000 méter jó nektek, viszont variáltak valamit az RTD-ben , így az MCS-esek nem tudják ezt ellenőrizni, csak azt látják hogy 0 elérhető anyag.
March 25, 2025 at 7:13 PM, Erik Gerzsenyi: Katod slitt 2-re hozza rendesen
March 25, 2025 at 7:13 PM, Erik Gerzsenyi: Ugyhogy ezt kizarhatjuk
March 25, 2025 at 7:18 PM, Erik Gerzsenyi: Vagyis
March 25, 2025 at 7:18 PM, Erik Gerzsenyi: Mostmar oda is 26 perce varunk

Chunk 349:
March 25, 2025 at 7:18 PM, Erik Gerzsenyi: De ezzel a hibaval nem tudtok semmit csinalni?
March 25, 2025 at 7:19 PM, 카스텔 발라지 F.A.: Nem sajnos, RTD-n keresztül nem tudtok oda kérni?
March 25, 2025 at 7:19 PM, Erik Gerzsenyi: Nem tudunk
March 25, 2025 at 7:19 PM, Erik Gerzsenyi: Nincs ra kapacitas
March 25, 2025 at 7:20 PM, 카스텔 발라지 F.A.: Akkor sajnos nincs mit tenni
March 25, 2025 at 7:37 PM, Nagy Dávid 4: Anod press 2-es R/W 1 számú agv kiált hibára help help köszönöm szépen

Chunk 350:
March 25, 2025 at 7:42 PM, Csanálosi Gábor FA: Útban volt neki a hulladék, belógott annyira hogy blokkolja. Meggyőztem hogy nem fogja bántani.
March 25, 2025 at 7:43 PM, Pintér Gábor: Coating anód 1-en 2-R/W-nél nem akarja elvinni a Jumbo Rollt az AGV🥲
March 25, 2025 at 7:43 PM, Csanálosi Gábor FA: Jövök

Chunk 351:
March 25, 2025 at 7:52 PM, Szappanos Gábor: Sziasztok. Megkérnék 1 kollegát, hogy folyamatossan legyen a coating közelében, ha van rá kapacitásostok. Ne keljen minden egyes agv hibánál megállítani a gépet. Köszönöm.
March 25, 2025 at 8:05 PM, Szücs Géza FT-B: Oké
March 25, 2025 at 8:06 PM, Rácz Dániel / FA: Rendben

Chunk 352:
March 25, 2025 at 8:57 PM, Szücs Géza FT-B: @카스텔 발라지 F.A. @Shahbaz 샤바즈 MCS/RTD Légyszives a rendszer szintű hibákat és hiányosságokat, hozzáférési problémákat NE privátban beszéljétek meg kérem szépen. Ezen dolgok olyan információk, ami több kollégát is érinthet, ezért jó ha tudnak róla. Nagyon szépen köszönöm. Please DO NOT discuss system-level errors and deficiencies, or access problems in private. These things are information that may affect several colleagues, so it is good for them to know about it. Thank you very much.

Chunk 353:
March 25, 2025 at 9:10 PM, Shahbaz 샤바즈 MCS/RTD: Understood. We will make sure to discuss issues openly so that all relevant colleagues are informed. If there are any concerns, one should not write privately; instead, messages should be shared in the group chat so everyone is aware. Thank you for the clarification.
March 25, 2025 at 10:22 PM, Nagy Dávid 4: Anod slitt1 ninsc AGV 30p help help köszönöm szépen

Chunk 354:
March 25, 2025 at 10:24 PM, 카스텔 발라지 F.A.: @Shahbaz 샤바즈 MCS/RTD can you check please how many available material for AN slitt#1?
March 25, 2025 at 10:26 PM, Shahbaz 샤바즈 MCS/RTD: Currently there is no material available for slitter 1.
March 25, 2025 at 10:26 PM, 카스텔 발라지 F.A.: Thank you very much!
March 25, 2025 at 10:27 PM, 카스텔 발라지 F.A.: @Nagy Dávid 4
March 25, 2025 at 11:49 PM, Nagy Dávid 4: Anod press 2 nincsen agv 22 perce help help köszönöm szépen

Chunk 355:
March 25, 2025 at 11:50 PM, Rácz Dániel / FA: Rajta vagyunk a dolgon csak nem tudjuk megmozdítani az AGVt.
March 25, 2025 at 11:52 PM, Szücs Géza FT-B: melyik az?
March 26, 2025 at 12:10 AM, Rácz Dániel / FA: AN #1, #20.
March 26, 2025 at 12:14 AM, Rácz Dániel / FA: CA AGV #18 kivéve a termelésből. Position not initialised error. A navitrolmonitor nem csatlakozik.
March 26, 2025 at 1:40 AM, Nagy Dávid 4: Anod slitt1 conveer stop help help köszönöm szépen

Chunk 356:
March 26, 2025 at 1:41 AM, Csanálosi Gábor FA: Megyek nemsokára, an 31 nel vagyik
March 26, 2025 at 1:48 AM, Csanálosi Gábor FA: Kész
March 26, 2025 at 2:37 AM, Szappanos Gábor: Hali. Anód 2 es roll raktárnál megállt az agv. Megnéznétek légyszíves.
March 26, 2025 at 2:46 AM, Csanálosi Gábor FA: Kész
March 26, 2025 at 4:18 AM, Pintér Gábor: Sziasztok anód 1 en (Coating) nem megy be a rewinderhet a Jumboért a robot beálltak egy kupacba a sor elejére

Chunk 357:
March 26, 2025 at 4:31 AM, Csanálosi Gábor FA: Pipa
March 26, 2025 at 6:27 AM, Oláh Rajmund: Sziasztok anode press 2 es gépre nem hozz az AGV anyagot meg tudjátok nézni?
March 26, 2025 at 6:28 AM, Skwarek Tibor: Nézzük
March 26, 2025 at 6:28 AM, Oláh Rajmund: Koszonom
March 26, 2025 at 6:35 AM, Shakir (MCS): AGV#05 on the way for Press2 Thank You
March 26, 2025 at 6:38 AM, Oláh Rajmund: Gyertek legyszives anode slitt 2 es géphez nem viszi el az anyagot a robot

Chunk 358:
March 26, 2025 at 6:39 AM, Viczai Tamás: Jövünk
March 26, 2025 at 6:53 AM, Skwarek Tibor: Kész
March 26, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.26 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 26, 2025 at 7:03 AM, K.Krisz Coating: Gyertek légyszives anod 1-re agv nem akar jönni a jumboért
March 26, 2025 at 7:03 AM, Viczai Tamás: Megyünk

Chunk 359:
March 26, 2025 at 7:09 AM, Shakir (MCS): @FA @Skwarek Tibor Please check the E0STKA35_M01, Data off, sensor on overtime. One job is getting delayed. Thank you
March 26, 2025 at 7:13 AM, Skwarek Tibor: Material left on manual port for a long time without send back or take out.
March 26, 2025 at 7:18 AM, K.Krisz Coating: Két agv jimbostol dekol az anod raktár ajtoba,gyertrk légyszives
March 26, 2025 at 7:19 AM, Viczai Tamás: Megyünk

Chunk 360:
March 26, 2025 at 7:48 AM, 최재균: 전극 코팅 음극1라인은 AGV 사용중인데 양극1라인도 AGV 사용해도 될까요 ?
March 26, 2025 at 7:52 AM, Baek Hojong(백호종)FA: 제가 시작시간 확인후 바로 말씀드릴껭ᆢ
March 26, 2025 at 8:29 AM, K.Krisz Coating: Anodra nem jönnek az agv
March 26, 2025 at 8:29 AM, duzzaman Md (MCS): Please check E0STKA32_P01, Carrier - RBA0470 It has been stuck there for a while and affecting other transportation. @Fa
March 26, 2025 at 8:29 AM, K.Krisz Coating: Jumbok a bufferen.

Chunk 361:
March 26, 2025 at 8:29 AM, K.Krisz Coating: Gyertek légyszives.
March 26, 2025 at 8:30 AM, Viczai Tamás: Itt vagyunk
March 26, 2025 at 9:09 AM, duzzaman Md (MCS): @FA Please check E0STKC11_C01 there is Hoist Time over dueing forking error. Thank you!
March 26, 2025 at 10:14 AM, Szarka Adrián: Sziasztok anod Slitt 1-2 re nem jön az agv. És van a raktárban 100 ezer méter rólunk s meg tudjatok nézni hogy mi a probléma ?

Chunk 362:
March 26, 2025 at 10:15 AM, Szarka Adrián: 2 napja ezzel szenvedünk hol jön az agv hol nem. Tegnap éjjel katod oldalon volt ez a probléma
March 26, 2025 at 10:16 AM, Skwarek Tibor: Koreaiak dolgoznak a raktárban. Reggel óta kerestük mi is a hibát.
March 26, 2025 at 10:16 AM, Szarka Adrián: És ezért nem jönnek a rollok a raktarbol ?
March 26, 2025 at 10:17 AM, Szarka Adrián: Le van állítva a raktár rendszer vagy mi ?

Chunk 363:
March 26, 2025 at 10:17 AM, duzzaman Md (MCS): SL 2 has existing job but STK 32 is out of service. @ Fa please check
March 26, 2025 at 10:18 AM, duzzaman Md (MCS): Ok, thank you for the insight
March 26, 2025 at 10:19 AM, Skwarek Tibor: Valami probléma reggel óta fennál, nem találtuk a pontos okát, ezért koreai támogatók dolgoznak most rajta.
March 26, 2025 at 10:22 AM, Szarka Adrián: Szóljatok, kerlek ha meg van a gond, mert Assy meg fog miattunk állni, mert nincs a raktárban reel se nagyon.

Chunk 364:
March 26, 2025 at 10:23 AM, Szarka Adrián: Máskor szóljatok kerlek ha neki álltok ilyet szerezni mert akkor nem küldjük be a raktárba a préselt anyagot, mert be tárolni be tarol de nem adja ki a rollokat.
March 26, 2025 at 10:23 AM, Skwarek Tibor: Rendben. Reggel a piros csoportba lett jelezve koreai által.
March 26, 2025 at 10:24 AM, Skwarek Tibor: Nem tudtuk, hogy eddig el fog húzódni. Órák óta nekik sem sikerült még megoldani.

Chunk 365:
March 26, 2025 at 10:51 AM, Szarka Adrián: Egyik gépre most jött meg az agv de a másik gépre meg nem jött. Lehet megoldották ?
March 26, 2025 at 10:53 AM, Czél Tamás: Sziasztok Kérlek mozgassátok el Catode Press elöl az AGV-ket mert nem férül el tőlük. Köszönöm
March 26, 2025 at 10:54 AM, Farkas Tamàs: Egy kis türelmet kérünk, oktatáson vagyunk, hamarosan megyünk
March 26, 2025 at 11:11 AM, Szarka Adrián: Anod Slitt 3 gépnél a 7 számú agv ki állt hibára kerlek nézzetek meg. Köszönöm

Chunk 366:
March 26, 2025 at 11:12 AM, Farkas Tamàs: Pillanat, még oktatáson vagyunk
March 26, 2025 at 11:15 AM, Szarka Adrián: Anod Press 2 jön az agv Anod Press 1 nem jön az agv Anod Slitt 3 jön az agv Anod Slitt 2 nem megy az agv Anod Slitt 1 nem megy az agv
March 26, 2025 at 11:22 AM, Szarka Adrián: Katod 4 roll raktár nem csinál semmit csak zenél egyfolytában. Agv bent áll és várja a rollt

Chunk 367:
March 26, 2025 at 11:23 AM, Szarka Adrián: Másik agv meg áll mögötte mert nem tudja hova kell neki menni. Meg fog állni így a katod oldalon is a termelés
March 26, 2025 at 11:25 AM, 김대호 (Kim Dae Ho): I heard there are no signals for Anode sliter 1 and 2, what's going on? @duzzaman Md (MCS)
March 26, 2025 at 11:27 AM, duzzaman Md (MCS): Maintainance is ongoing at STK32
March 26, 2025 at 11:27 AM, 김대호 (Kim Dae Ho): The command is not going in from Acs to agv.

Chunk 368:
March 26, 2025 at 11:31 AM, Shakir (MCS): Please check @ACS THere is No job creation to AGV (ACS) in MCS. Thank you
March 26, 2025 at 11:34 AM, Shakir (MCS): If the equipment is not active(OOS) then there will be no communication between MCS and equipment.
March 26, 2025 at 11:36 AM, Shakir (MCS): This message was deleted.
March 26, 2025 at 11:37 AM, Shakir (MCS): This message was deleted.
March 26, 2025 at 11:44 AM, Shakir (MCS): Now Job has been assigned to AGV#17 for the slitt2 AN. Thank you

Chunk 369:
March 26, 2025 at 11:50 AM, duzzaman Md (MCS): There is no active LR in SLT 1 AN
March 26, 2025 at 11:52 AM, 김대호 (Kim Dae Ho): Thank u!
March 26, 2025 at 11:55 AM, Shakir (MCS): The AGV arrived and deposited successfully to slit2 AN. ✅ Thank you
March 26, 2025 at 12:16 PM, 최재균: 양극1라인 2nd 아까 담당자가 AGV를 정위치를 못찾아 조치해주고 나서 스텝에 문제가 있어서 터렛이 안되어서 설비 정지 했습니다.
March 26, 2025 at 1:09 PM, 서지원: 해당 이슈 조치이력과 개선안 공유 부탁드립니다. 잘 아시다시피 코팅 생산 멈출시 조건 설정 Loss발생하여 목표 수율 달성에 타격이 갑니다…

Chunk 370:
March 26, 2025 at 1:10 PM, Shakir (MCS): Transport job has been initiated successfully for slitt1, AGV#25 on the way. ✅ Thank you
March 26, 2025 at 1:22 PM, Szarka Adrián: Anod Press 1 Anod Press 2 Nem jön az agv 20 perce
March 26, 2025 at 1:24 PM, Skwarek Tibor: Press 2 re úton van
March 26, 2025 at 1:33 PM, Skwarek Tibor: Koreai kollegák ajtózsanérokat cserélnek a raktárakon. Ezért akadozik az anyagellátás.

Chunk 371:
March 26, 2025 at 1:39 PM, Szarka Adrián: Tegnap is cseréltek katod oldalon és nem álltunk miatta. Na akkor szólok neki hogy pakoljon odébb.
March 26, 2025 at 2:53 PM, Oláh Rajmund: Gyertek legyszives anode press 2 re
March 26, 2025 at 2:53 PM, Oláh Rajmund: Ki állt hibara egy AGV
March 26, 2025 at 2:56 PM, Skwarek Tibor: Megyünk
March 26, 2025 at 2:57 PM, Farkas Tamàs: Kész
March 26, 2025 at 3:49 PM, Oláh Rajmund: Gyertek legyszives cathode press 1 re Meg àllt egy AGV úgy hogy rajta van a Jumbo

Chunk 372:
March 26, 2025 at 3:50 PM, Skwarek Tibor: Megyünk
March 26, 2025 at 5:55 PM, K.Krisz Coating: Anod 1 -re nem jönn agv.gyertek légyszi kösze
March 26, 2025 at 5:56 PM, K.Krisz Coating: Bufferonna jumbo
March 26, 2025 at 5:57 PM, K.Krisz Coating: Sos
March 26, 2025 at 6:10 PM, Szabadi Miki: Kész

Chunk 373:
March 26, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 26, 2025 at 6:36 PM, Somoskövy Martin: Sziasztok. Cathode Press 2-őn az A oldali csévélőre nem rakja fel a buffer-ről a rollt a robot. Megnéznétek? Köszönöm.

Chunk 374:
March 26, 2025 at 6:37 PM, Oláh András: Megyünk
March 26, 2025 at 6:37 PM, Farkas Dániel Elekt: Sziasztok Por katod kettes soron az agv hivo gomb nem mukodik! Nezzetek ra legyszives!
March 26, 2025 at 6:38 PM, Szabadi Miki: Rendben megyünk
March 26, 2025 at 6:40 PM, Dániel Hufnágel: A port fizikálisan üres ugye?
March 26, 2025 at 6:42 PM, Szabadi Miki: Buffer ki volt kapcsolva , visszanyomtam már rakja is

Chunk 375:
March 26, 2025 at 8:29 PM, Somoskövy Martin: Anode Press 8 elött kiállt hibára az 1-es AGV. Megnéznétek? Köszönöm.
March 26, 2025 at 8:30 PM, Oláh András: Megyünk
March 26, 2025 at 9:50 PM, Hári Zoltàn invited Semenszki Péter, Horváth Attila and Rudyi Volodymyr.
March 26, 2025 at 10:08 PM, Csicskovics Balázs: Sziasztok Anode press 1 az AGV nem hoz ki Roll-t. Ránáznétek? Köszönöm
March 26, 2025 at 10:14 PM, Szabadi Miki: Nézzük

Chunk 376:
March 26, 2025 at 10:47 PM, Szabadi Miki: @VK (mcs) please check this , E1PRA01_P01
March 26, 2025 at 11:04 PM, VK (mcs): Did you request a load ?
March 26, 2025 at 11:09 PM, Oláh András: Anode press 1 LR waiting 86 mins now.
March 26, 2025 at 11:09 PM, Szabadi Miki: According to ACS, there is LR
March 26, 2025 at 11:20 PM, VK (mcs): There was LR at 7:07 AM RbA0189 assigned to press 1 Job canceled by OP action at 9:02 .
March 26, 2025 at 11:45 PM, VK (mcs): New LR received and RBA0984 assigned

Chunk 377:
March 26, 2025 at 11:52 PM, Oláh András: Completed. Appreciate your help 🙏
March 26, 2025 at 11:53 PM, VK (mcs): Most welcome
March 27, 2025 at 12:19 AM, Rudyi Volodymyr: Kathode 1 AGV probléma. SOS
March 27, 2025 at 1:20 AM, Rudyi Volodymyr: Kathode 1 coating AGV megint megállt.
March 27, 2025 at 1:21 AM, Szabadi Miki: Megyünk
March 27, 2025 at 2:45 AM, Csicskovics Balázs: Sziasztok Cathode slitt 3, az egyik ajtózár sérült. Nézzétek meg légyszíves. Köszönöm

Chunk 378:
March 27, 2025 at 2:56 AM, Csicskovics Balázs: Cathode slitt 2 előtt lehalt egy AGV. Gyertek légyszíves Köszönöm
March 27, 2025 at 2:58 AM, Csicskovics Balázs: Anode press 2 mögött is ugyan ez a helyzet!!!
March 27, 2025 at 2:58 AM, Szabadi Miki: nemsoká ott leszünk csak poron vagyunk
March 27, 2025 at 3:52 AM, Csicskovics Balázs: Anode SL asztal környéként 3 AGV nem tudja mi tévő legyen! Csak zenél és sárgán villog!
March 27, 2025 at 3:54 AM, Szabadi Miki: Okés lassan ott leszünk

Chunk 379:
March 27, 2025 at 4:17 AM, Dániel Hufnágel: Igen, riportálva és jelezve vezetőség felé!
March 27, 2025 at 4:17 AM, Csicskovics Balázs: Rendben köszönöm
March 27, 2025 at 6:32 AM, Oláh Rajmund: Sziasztok legyszives meg tudjátok nézni higy anode press 2 re miért nem hoz anyagot az AGV?
March 27, 2025 at 6:33 AM, Skwarek Tibor: Nézzük
March 27, 2025 at 6:33 AM, Oláh Rajmund: Koszonom
March 27, 2025 at 6:34 AM, Skwarek Tibor: Kérjétek le újra légyszíves. Probléma volt az agv vel

Chunk 380:
March 27, 2025 at 6:40 AM, Szarka Adrián: Sziasztok. Egy kérdés lenne. Csak hogy tisztában legyünk a dolgokkal. Eddig arról volt szó és úgy is működött, hogy ha a robot le vette a bufferől a rollt automatikusan jött a következő roll. Nekünk nem kell semmit nyomni és rendelni. Ez még mindig így van vagy ismét volt valami változtatás amiről mi nem tudunk ? Vagy maradt ugyan így ahogy eddig volt. Csak valamiért nem akar működni ez 2-3 napja ? Köszönöm

Chunk 381:
March 27, 2025 at 6:43 AM, Oláh Rajmund: Esteleg valaki ide tudna jönni anode roll raktárba? Koszonom
March 27, 2025 at 6:44 AM, Szarka Adrián: 43 perce nem jön a roll anod Press 2 gépre.
March 27, 2025 at 6:44 AM, Skwarek Tibor: Pontosan mi sem tudjuk. Nem kapunk meg minden információt, mint például a tegnapi állásról sem az ajtózsanérok cseréje miatt. Dolgozunk rajta, hogy gördülékenyebben menjen a kommunikáció és a probléma megoldás.
March 27, 2025 at 6:49 AM, Szarka Adrián: Köszönöm

Chunk 382:
March 27, 2025 at 6:49 AM, Farkas Tamàs: Megy az AGV az anyagért a raktárba
March 27, 2025 at 7:31 AM, Bilgee/빌지 /A조/AGV left this chatroom.
March 27, 2025 at 9:28 AM, Shakir (MCS): @FA @Skwarek Tibor Please check E0CNVC11_RTV01 is OOS, Jobs getting delayed. Thank you
March 27, 2025 at 9:39 AM, Kertész Dániel: Our technicians are there, and we know about this error. The installation company has to inspect it. Thank you for your patience!

Chunk 383:
March 27, 2025 at 9:40 AM, duzzaman Md (MCS): Appreciate your insight
March 27, 2025 at 9:44 AM, KIM SEYEON [김세연]_FA: @서지원 피엠님 금일 코터 롤 권취량 늘리는 테스트 하고 있다고 들었는데 테스트 시간이랑 향후 어떻게 운영하실지 공유해주심 참고하겠습니다.
March 27, 2025 at 9:44 AM, KIM SEYEON [김세연]_FA: @Lili 번역부탁해요
March 27, 2025 at 9:49 AM, Lili: Úgy hallottam, hogy ma a Coateren tesztelni fogják a roll tekercshossz meghosszabbítását; ha meg tudná osztani a teszt időpontját, és hogy innentől hogyan fognak üzemelni, akkor tudnánk rá hivatkozni.

Chunk 384:
March 27, 2025 at 10:31 AM, Shakir (MCS): @FA @Skwarek Tibor Please check E0STKC12 Hoist Time over Error. Jobs getting delayed. Thank you
March 27, 2025 at 11:09 AM, 서지원: 안녕하세요 펨님! 작일 야간조부터 인원부족으로 인해 양/음 1라인 2700->2900m로 변경하여 생산진행했고 현재까지 2900으로 진행중입니다. 프레스 공정성을 위해 현재부터는 3000m로 테스트해본후 코팅에서 문제 없을시 3000m로 생산하겠습니다.
March 27, 2025 at 11:09 AM, 서지원: @KIM SEYEON [김세연]_FA
March 27, 2025 at 11:26 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다

Chunk 385:
March 27, 2025 at 2:50 PM, 김대호 (Kim Dae Ho): EC1P073F3425112A 캐리어 ID 미부여건 발견 -> 설비 히스토리 확인시 LTC0145 확인 -> LTC0145 캐리어 ID 확인시 MCS FULL 상태, MES EMPTYEMPTY 로 상이함 확인 해당 내용관련 대응 가능하실까요?
March 27, 2025 at 3:01 PM, KIM SEYEON [김세연]_FA: @김대호 (Kim Dae Ho) 조장님 정보수정은 @김 민성 피엠님쪽에서 해주셔야 할것 같고, 저렇게 캐리어ID 미부여되는 현상에 대해서는 금일 16시에 슬리터에서 PNT SKCC 제어인원들과 원인확인하려고 합니다.

Chunk 386:
March 27, 2025 at 3:05 PM, 주범진: @Mr.Miti (미티) FA hello Im asking for your help! There is some foil took off on the port where the logistics team puts the foil in Could you please arrange some person to take the foil in the warehouse? 20240603130 _ 122-00122A
March 27, 2025 at 3:27 PM, 김 민성: LTC0145는 슬리팅 장비쪽으로 공트레이 출하가 불가능했어야 하는데, 제품을 가지고 릴창고로 들어온것으로 보이네요. 비어있는 tray에 mapping을 다시 해야합니다. 데이터 수정은 ITS 주시면 연관된 트레이들 현장실사 요청 후 진행될 수 있습니다.

Chunk 387:
March 27, 2025 at 4:35 PM, 양원석: Pm님 LTC0145가 어떤상태여서 슬리터쪽으로 반송이 되면 안됐던 걸까요?
March 27, 2025 at 4:47 PM, 김 민성: 2월17일 부터 창고에만 적재되어있었어야 합니다. Mes상 EC1P073EB273622A 로 Full 상태입니다.
March 27, 2025 at 6:01 PM, Hári Zoltàn: Sziasztok! Olyan kérdésem van, hogy az anód 2 coatingon tudjuk használni a tömegtermelés folyamán az agv-ket?
March 27, 2025 at 6:04 PM, Szabadi Miki: Szia , egyenlőre imformáció beszerzésvan folyamatban hogy azon a soron működő képes e

Chunk 388:
March 27, 2025 at 6:05 PM, Hári Zoltàn: Remek, köszönöm!
March 27, 2025 at 6:10 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 27, 2025 at 6:11 PM, Szabadi Miki: Amint tudunk valamit jelzünk mindenképp

Chunk 389:
March 27, 2025 at 7:06 PM, Turianytsia Olesia: A szállítószalag nem működik cathode slitt 2
March 27, 2025 at 7:08 PM, Szabadi Miki: Megyünk
March 27, 2025 at 7:27 PM, Somoskövy Martin: Sziasztok. Cathode Slitt 1-re lassan 20 perce nem jön az anyag. Megnéznétek? Köszönöm.
March 27, 2025 at 7:28 PM, Szabadi Miki: Itt vagyok katod slitt 2 , ha végzek ránézek
March 27, 2025 at 7:42 PM, Szabadi Miki: Uton van az anyag
March 27, 2025 at 7:47 PM, Turianytsia Olesia: Az AGV elakadt slitt 2 cathode

Chunk 390:
March 27, 2025 at 7:47 PM, Szabadi Miki: Megyünk
March 27, 2025 at 7:55 PM, Farkas Dániel Elekt: Sziasztok Anod por airshowerben megallt az agv Nezzetek ra legyszives! Koszi
March 27, 2025 at 7:57 PM, Szabadi Miki: Oké amint tudunk megyünk
March 27, 2025 at 8:15 PM, Varga Zoltán: Megoldva
March 27, 2025 at 8:30 PM, Farkas Dániel Elekt: Koszii
March 27, 2025 at 9:16 PM, Rudyi Volodymyr: Sziasztok, a fóliaraktárban lenne szükségünk egy kis segitségre. Köszi

Chunk 391:
March 27, 2025 at 9:16 PM, Oláh András: Megyünk
March 27, 2025 at 11:10 PM, Csicskovics Balázs: @Szabadi Miki gyere kérlek Cathode slitt 3 hoz köszönöm
March 27, 2025 at 11:11 PM, Szabadi Miki: Uton
March 28, 2025 at 12:50 AM, Hári Zoltàn: Az anod 2-s roll raktarnal rakoncátlankodik az egyik agv. Gyertek legyszi nézzetek rá!
March 28, 2025 at 12:50 AM, Turianytsia Olesia: A szállítószalag elakadt anode slitt 3
March 28, 2025 at 12:51 AM, Oláh András: Megyünk

Chunk 392:
March 28, 2025 at 1:43 AM, Rudyi Volodymyr: Katod 1 AGV probléma
March 28, 2025 at 1:44 AM, Hári Zoltàn: Coating
March 28, 2025 at 1:45 AM, Szabadi Miki: Megyünk
March 28, 2025 at 2:41 AM, Hári Zoltàn: Gyertek legyszi az anod 1 coatingra! Koszi!
March 28, 2025 at 2:41 AM, Szabadi Miki: Megyünk
March 28, 2025 at 2:42 AM, Hári Zoltàn: A 2 es- rw- n eppenhogy nem rakta melle a roll-t az agv-nek. epp imatkozunk h ne essen le
March 28, 2025 at 2:44 AM, Dániel Hufnágel: Megyek

Chunk 393:
March 28, 2025 at 2:44 AM, Hári Zoltàn: Itt vannak a sracok is. Megoldottak faszan!
March 28, 2025 at 2:44 AM, Dániel Hufnágel: Fasza
March 28, 2025 at 2:46 AM, Hári Zoltàn: Akartam mondani imádkozunk.... (crackup)
March 28, 2025 at 6:10 AM, Szarka Adrián: Sziasztok
March 28, 2025 at 6:10 AM, Szarka Adrián: SOS segítség kéne anod Press re
March 28, 2025 at 6:11 AM, Szarka Adrián: El kell állni az agv vél mert nem férünk el. Coating meg fog állni ha nem tudjuk át vinni nekik az üres kocsikat

Chunk 394:
March 28, 2025 at 6:11 AM, Szarka Adrián: 1 és a 13 útban van anod Press 1 gep mögött
March 28, 2025 at 6:11 AM, Szarka Adrián: Köszönöm
March 28, 2025 at 6:12 AM, Mr.Miti (미티) FA: Okes
March 28, 2025 at 6:13 AM, Szarka Adrián: Kb 8-10 kocsit kell el vinnünk
March 28, 2025 at 6:14 AM, Mr.Miti (미티) FA: Már mennek is el az útból

Chunk 395:
March 28, 2025 at 6:31 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 13 Technician, 1 Sl, 4 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 396:
March 28, 2025 at 6:48 AM, Mohammad Amir: @FA @Zsolt F.A. Please check E1PRA050_P02,E1PRA060_P02,E1PRA070_P02 are OOS that's why three job are pending for long time. Thank you very much!
March 28, 2025 at 7:12 AM, Szeitz Flórián: Sziasztok! Anód press 2 R/W-hez nem érkezik az AGV légyszives nézzétek meg. Köszönöm
March 28, 2025 at 7:13 AM, gutenkunstabelzoltan: Nezzuk

Chunk 397:
March 28, 2025 at 7:14 AM, Mohammad Amir: @gutenkunstabelzoltan @FA Please check E0STKC31_C01 there is Load Collapse Error(Left). Thank you very much!
March 28, 2025 at 7:19 AM, gutenkunstabelzoltan: Kesz
March 28, 2025 at 7:24 AM, Mohammad Amir: Thank you very much 🙏
March 28, 2025 at 8:46 AM, 배병민 (Bae Byoungmin): @서지원 PM님 안녕하세요 이반차 FA 배병민PM입니다. 금일 음극 2Line 생산 시작 일정 공유부탁드립니다. 진행전 EQ설비와 이재기간 세팅 상태 확인 조정등이 필요하여 대응 계획입니다.

Chunk 398:
March 28, 2025 at 8:51 AM, 서지원: 안녕하세요! 금일 음극 코팅 2라인 연속 가동 가능 일정 대략 3시쯤으로 예상됩니다.
March 28, 2025 at 8:56 AM, Mohammad Amir: @FA Please check these jobs are still Alternated. Thank you very much!
March 28, 2025 at 8:57 AM, 유병일: @서지원 피엠님 안녕하세요 그럼 2시에 코터장비랑 이재기간에 원점 동기화 진행할 수 있을까요?! 같이 원점 맞추고 agv 생산 투입 진행하고자합니다!
March 28, 2025 at 9:29 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STK001_C01 there is SCP Main Power CP trip error. Thank you very much!

Chunk 399:
March 28, 2025 at 9:30 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STKA34_C01 there is SCP Main Power CP trip error causing several jobs to be in waiting state. Thank you very much!
March 28, 2025 at 9:35 AM, Szarka Adrián: Anod Slitt 4 indulni fog. Agv megfelelően működik ott ? Erről van információ ?
March 28, 2025 at 9:36 AM, Mr.Miti (미티) FA: Csapassad neki majd kiderül
March 28, 2025 at 9:56 AM, Mohammad Amir: @FA Please check these jobs are still Alternated. Thank you very much!

Chunk 400:
March 28, 2025 at 10:08 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0CNVA51_06_195 there is Data Loss Error. Thank you very much!
March 28, 2025 at 10:09 AM, Powder tréner: Sziasztok,Poron anód raktár nem adja ki az anyagot 2 sorra !
March 28, 2025 at 10:15 AM, Mohammad Amir: For E1PLA021_P02 material is on the way. ✅ Thank you very much!
March 28, 2025 at 10:24 AM, Powder tréner: Nálunk anyaghiány van E1PLAO41_P02,E1PLAO41_P01,E1PLAO31_P01.

Chunk 401:
March 28, 2025 at 10:25 AM, Mohammad Amir: Checking
March 28, 2025 at 10:27 AM, Mohammad Amir: We received LR for all the mentioned Ports however currently there is no transferable materials available. Thank you very much!
March 28, 2025 at 10:44 AM, Mr.Miti (미티) FA: @Mohammad Amir E1SLA040_P01 LR is active, but MCS does not show it as active. Please check.
March 28, 2025 at 10:45 AM, Mohammad Amir: Checking

Chunk 402:
March 28, 2025 at 10:46 AM, Mohammad Amir: There is an Active LR however there is no material available. Thank you very much!
March 28, 2025 at 10:47 AM, Mr.Miti (미티) FA: Thank you sir!
March 28, 2025 at 10:47 AM, Mohammad Amir: You are welcome,Sir!
March 28, 2025 at 10:48 AM, Mohammad Amir: @Mr.Miti (미티) FA Please check E0STKC12_C01 there is Hoist Time Over Error. Thank you very much!
March 28, 2025 at 11:29 AM, Kurgya Attila: Segítséget kérek anod roll raktárhoz az 1es daruhoz. Köszönöm

Chunk 403:
March 28, 2025 at 11:29 AM, Szeitz Flórián: Sziasztok? Katód press 2 R/W robot lent maradt nincs pozícióba . Ez még javítás alatt ? 2 támogató volt itt de már el mentek .
March 28, 2025 at 11:59 AM, Kurgya Attila: Anod 1en elindítjuk az AGV-t. Légyszíves gyertek hátha lesz valami gond
March 28, 2025 at 12:22 PM, Fülöp Csaba: Sziasztok. Anode 2 Coatingon 12:45-kor indítjuk a gyártást. AGV támogatás szükséges. Kérem legyen jelen folyamatosan FA támogató! Csak így tudjuk üzemeltetni a sort. Köszönöm

Chunk 404:
March 28, 2025 at 12:22 PM, Fülöp Csaba: Hello. We will start production at Anode 2 Coating at 12:45. AGV support is required. Please have FA support present at all times! This is the only way we can operate the line. Thank you
March 28, 2025 at 1:15 PM, Szarka Adrián: Anod pressen a 10 számú agv küldjétek odébb köszönöm
March 28, 2025 at 1:16 PM, Szarka Adrián: Anod Press 3 előtt áll
March 28, 2025 at 1:34 PM, adambenczik: Légyszíves, vagy valami?

Chunk 405:
March 28, 2025 at 1:35 PM, Mr.Miti (미티) FA: Már nem áll
March 28, 2025 at 1:55 PM, Annau András: Mindenféle rosszindulat nélkül, ezeket a problémákat magatoktól kéne észrevenni, és akkor nem kellene 15 percenként a műszakvezetőknek beírogatni a problémákat. Mivel alapvetően folyamatosan problémák vannak az AGV-kel, így véleményen szerint indokolt is lenne a részetekről a folyamatos jelenlét a területen, és akkor nem akadnánk fent egy "légyszíves" lemaradásakor.

Chunk 406:
March 28, 2025 at 1:56 PM, gutenkunstabelzoltan: Hogy erre még más nem gondolt……
March 28, 2025 at 1:58 PM, 김대호 (Kim Dae Ho): Please check the signal of Anode sliter 4 L/R @Mohammad Amir
March 28, 2025 at 1:58 PM, adambenczik: Előre kéne tudnunk hogy egy AGV-t arrébb kéne tenni? 🤔
March 28, 2025 at 1:58 PM, Mohammad Amir: Checking Sir!

Chunk 407:
March 28, 2025 at 1:58 PM, Mr.Miti (미티) FA: Jelen esetben az agv nem hibában állt hanem automata üzemmódban várakozott. Másrészről a területen vannak a srácok folyamatosan, viszont a terület nem csak a press slitt zónában merül ki. Illetve a jómodor mindentől függetlenül azt hiszem alapvető dolog lehetne a kommunikáció során. Köszönöm a megértést!
March 28, 2025 at 1:59 PM, Mohammad Amir: Job has been created at 13:52. ROLL RBA1253 on the way. Thank you very much!

Chunk 408:
March 28, 2025 at 2:00 PM, 김대호 (Kim Dae Ho): Thank you!!
March 28, 2025 at 2:00 PM, Mohammad Amir: AGV#15 in the way. ✅ Thank you very much!
March 28, 2025 at 2:00 PM, Mohammad Amir: You are welcome,Sir!
March 28, 2025 at 2:00 PM, 이게리: Oda írta a végére hogy köszönöm 🥰 egyetértek @Mr.Miti (미티) FA de ha véletlenül lemarad valami akkor ne akadjunk meg mindenen ☺️ előfordulhat mindenkivel, emberek vagyunk, veletek is, velünk is. Köszönöm a megértést (thumbsup)

Chunk 409:
March 28, 2025 at 2:02 PM, Mr.Miti (미티) FA: Ez természetes. 😇
March 28, 2025 at 2:04 PM, Böröcz Tamás: Amúgy is csak felalá sétálunk
March 28, 2025 at 2:08 PM, Mohammad Amir: @FA Please check these jobs are still Alternated. Thank you very much!
March 28, 2025 at 2:22 PM, Szeitz Flórián: Légyszives nézzétek meg a 15 AGV útját mert elméletileg az menne a Slitt 4 re de már 2x volt ott és most a press 5nél van

Chunk 410:
March 28, 2025 at 2:30 PM, KIM SEYEON [김세연]_FA: @(Unknown) please check why roll agv 15 at anode is stopped now?
March 28, 2025 at 2:31 PM, Mohammad Amir: Checking Sir!
March 28, 2025 at 2:31 PM, KIM SEYEON [김세연]_FA: Destination is E1SLA040_P01 BUT it is stopped without alarm.
March 28, 2025 at 2:35 PM, (Unknown): MCS log history says Rail_VehicleDeparted at 13:59. After that there is no log history

Chunk 411:
March 28, 2025 at 2:36 PM, KIM SEYEON [김세연]_FA: @이연수 매니저님 지금 음극 롤 AGV 15호기가 슬리터 4호기로 가는도중 멈춰서 아무것도 안합니다. 원인 확인 부탁드립니다
March 28, 2025 at 2:36 PM, KIM SEYEON [김세연]_FA: @심찬울 매니저님 UW 버퍼 사용모드가 따로 있나요? 설정해줘야하는게 있을까요?
March 28, 2025 at 2:38 PM, Mohammad Amir: @ACS Please check this issue AGV#15 has been assigned and departed but it not moving now,from MCS side everything is fine. Thank you very much!
March 28, 2025 at 2:42 PM, 이철훈_CIM_SKCC: AGV15경로의 Segment 옵션을 막아놓으셨는데 풀어주시면 이동합니다.

Chunk 412:
March 28, 2025 at 2:43 PM, 이철훈_CIM_SKCC: Photo
March 28, 2025 at 2:44 PM, KIM SEYEON [김세연]_FA: 언제 누가 막았는지도 추적이 가능한가요?
March 28, 2025 at 2:44 PM, Mohammad Amir: Sir, AGV#15 has started to move. Thank you very much!
March 28, 2025 at 2:44 PM, 이철훈_CIM_SKCC: ACS담당 확인요청했는데 한참동안 막혀있던거라 누가 막았는지는 확인이 어렵다고...
March 28, 2025 at 2:45 PM, 이철훈_CIM_SKCC: 현재 Segment 해제하여 이동되었네요.
March 28, 2025 at 2:46 PM, KIM SEYEON [김세연]_FA: 그 다음다음 노드 이동시 장애물 감지로 멈ㄷ줍니다

Chunk 413:
March 28, 2025 at 2:46 PM, KIM SEYEON [김세연]_FA: 장애물 감지 자꾸 걸리니까 막은것 같습니다
March 28, 2025 at 2:47 PM, KIM SEYEON [김세연]_FA: 우선 뮤트로 가게해놨는데 센서 감지영역 확인이 필요합니다. @강기훈 @최대운 매니저님
March 28, 2025 at 2:53 PM, 장정훈: @심찬울 음극 슬리터4호기 척킹 도중 EQ#1 T05 PIO Time over 발생 되었는데 확인 부탁 드립니다.
March 28, 2025 at 2:58 PM, Vászon Márton: Agv 21 hibával áll a katód press egyes gépnél
March 28, 2025 at 2:59 PM, Vászon Márton: Légyszi nézzetek rá majd, kikapcsoltam ne sipákoljon ha jön a vip

Chunk 414:
March 28, 2025 at 3:01 PM, adambenczik: Koreai piszkálta eddig
March 28, 2025 at 3:03 PM, 최대운: 아닙니다. 슬리터 4호기 오늘 처음 가동했다고 합니다. 그전에 이쪽으로 갈일이 없어서 예전부터 막아 놓은거 같습니다. 이제 풀고 상황을 지켜봐야될 것 같습니다.
March 28, 2025 at 3:17 PM, Szarka Adrián: @Mr.Miti (미티) FA legyetek kedvesek ide fáradni anod Slitt 4 géphez mert ki állt az agv hibára. Megértésed köszönöm szépen. Így jó lesz ?
March 28, 2025 at 3:18 PM, Mr.Miti (미티) FA: Nem kell túlzásba esni 😘
March 28, 2025 at 3:19 PM, Szarka Adrián: Tudod hogy vicc volt 😘😘😘

Chunk 415:
March 28, 2025 at 3:19 PM, Mr.Miti (미티) FA: Én tudom 😇
March 28, 2025 at 3:22 PM, Szarka Adrián: Anod Press 7 gépnél is ki áll hibára a 7 agv. Gyertek kerlek köszi
March 28, 2025 at 3:23 PM, Szarka Adrián: Nem kell jött egy Kollega megcsinálta.
March 28, 2025 at 3:42 PM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0CNVA51 6182 there is servo motor alarm occurred. Thank you very much!
March 28, 2025 at 3:48 PM, Powder tréner: Sziasztok,por anodon megált az AGV, Szeretnék kérni segítséget.

Chunk 416:
March 28, 2025 at 4:18 PM, Mohammad Amir: @FA Please check this error still exists. Thank you very much!
March 28, 2025 at 4:19 PM, adambenczik: We are working on it
March 28, 2025 at 4:20 PM, Mohammad Amir: Thank you very much!
March 28, 2025 at 5:05 PM, Karina Lyzanets: Sziasztok! Cathode Slitt 5-6 mögött megállt a Conveyor pálya. Légyszives nézzétek meg, köszi
March 28, 2025 at 5:09 PM, gutenkunstabelzoltan: Az félemelet is fel van telve reelekkel

Chunk 417:
March 28, 2025 at 5:12 PM, gutenkunstabelzoltan: Raktárban történik valami
March 28, 2025 at 5:14 PM, adambenczik: Nézzük
March 28, 2025 at 5:43 PM, Kurgya Attila: Sziasztok Anod 1 nél megállt a fólia robot. Sos kellene a segítségetek
March 28, 2025 at 6:17 PM, Viktoriia Hleba: Sziasztok. 2 slitter cathode R/W conveer stop. Kérem, nézze meg.

Chunk 418:
March 28, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 9+2/11(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(2+1): Pálosi Róbert, Kovács Ágnes, (+Radics András) Sick(0): --------------- Electrode3): Szabadi Miki, Kiss Balázs, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Denkó János --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztás

Chunk 419:
March 28, 2025 at 6:28 PM, Szabadi Miki: Megyünk
March 28, 2025 at 7:29 PM, Anton Mashchenko: Hello, come to anode press 2, AGV 17 error! Thanks!
March 28, 2025 at 8:19 PM, Pintér Gábor: Sziasztok coating folia raktarhoz szeretnenk segitseget kérni
March 28, 2025 at 8:19 PM, Pintér Gábor: Köszönöm
March 28, 2025 at 8:21 PM, Szabadi Miki: Megyünk
March 28, 2025 at 8:48 PM, Viktoriia Hleba: 1 slitter cathode nincs tárca . Kérem, nézze meg. Köszönöm

Chunk 420:
March 28, 2025 at 8:51 PM, Szabadi Miki: Raktár hiba van , amint működik a raktár mennek a tálcák is kis türelem
March 28, 2025 at 9:01 PM, Szabadi Miki: @Shahbaz 샤바즈 MCS/RTD Could you check why E0STKC51 is not sending an empty tray towards the cathode slitt? Thank you!
March 28, 2025 at 9:03 PM, Shahbaz 샤바즈 MCS/RTD: Because the empty reel trays are located in stocker C52.

Chunk 421:
March 28, 2025 at 9:05 PM, Shahbaz 샤바즈 MCS/RTD: Also I think it set in RTD to transfer only from C52 even if there are empty trays in C51.
March 28, 2025 at 9:08 PM, Szabadi Miki: The problem was that due to the C52 error, the C51 did not unload the empty trays either and the cathode slitt was stuck.
March 28, 2025 at 9:09 PM, Szabadi Miki: but both warehouses are now working

Chunk 422:
March 28, 2025 at 9:10 PM, Shahbaz 샤바즈 MCS/RTD: Yes, there are empty trays in both stockers but in the RTD next lot search it is showing trays only from C52.
March 28, 2025 at 9:12 PM, Szabadi Miki: Don't you know why this could be?
March 28, 2025 at 9:16 PM, Szabadi Miki: Okay, thanks for your help!
March 28, 2025 at 9:16 PM, Shahbaz 샤바즈 MCS/RTD: You’re welcome.
March 28, 2025 at 10:16 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check An roll stocker A35 “MCP Satety Relay Off” Thank you.

Chunk 423:
March 28, 2025 at 10:27 PM, Rácz Dániel / FA: @Czeilinger Krisztián
March 28, 2025 at 10:33 PM, Szabadi Miki: Solved
March 28, 2025 at 11:00 PM, Anton Mashchenko: Come to anode press 3, R/W robot problem! Thanks!
March 28, 2025 at 11:22 PM, Kiss Balázs F.A.: @Szücs Géza FT-B légyszíves gyere press 3
March 29, 2025 at 12:52 AM, Nagy Dávid 4: Katod slitt 2 nincsen TRAY ID help help help köszönöm szépen
March 29, 2025 at 12:53 AM, Szabadi Miki: Megyünk

Chunk 424:
March 29, 2025 at 1:14 AM, Anton Mashchenko: Again.. Come to anode press 3, pls!
March 29, 2025 at 1:15 AM, Pintér Gábor: Anod 1 Unwindernél megállt a nagy agv nem veszi le róla a fóliát
March 29, 2025 at 1:18 AM, Szappanos Gábor: Legyetek szívessek jönni, ha tudtok. Coating anód 1 re. Köszi.
March 29, 2025 at 1:19 AM, Szappanos Gábor: Hiba, amit a gábor előttem beírt.
March 29, 2025 at 1:19 AM, Szücs Géza FT-B: @Szabadi Miki vagy @Rácz Dániel / FA ez sos, plíz

Chunk 425:
March 29, 2025 at 1:20 AM, Szabadi Miki: Dani megy slittnél vagyunk még
March 29, 2025 at 1:20 AM, Rácz Dániel / FA: Jövünk
March 29, 2025 at 1:21 AM, Anton Mashchenko: ???
March 29, 2025 at 1:21 AM, Szücs Géza FT-B: ilyen esetben a Slitt másodlagos. A slitt max csak áll, a coaternél meg odaég a fólia. Légyszi ezt tartsátok szem előtt mindig. Köszönöm.
March 29, 2025 at 1:28 AM, Nagy Dávid 4: This message was deleted.

Chunk 426:
March 29, 2025 at 1:29 AM, Nagy Dávid 4: Come to anode press 3, R/W robot problem! Thanks!
March 29, 2025 at 1:29 AM, Szücs Géza FT-B: fognak menni a srácok, amint végeznek máshol.
March 29, 2025 at 1:39 AM, Viktoriia Hleba: 1 slitterr cathode . R/W conveer stop. Kérem, nézze meg. Köszönöm
March 29, 2025 at 1:42 AM, Szabadi Miki: Igyekszünk menni
March 29, 2025 at 1:45 AM, Nagy Dávid 4: Anod roll raktár 5 számú agv pozíció probléma help help köszönöm szépen

Chunk 427:
March 29, 2025 at 1:45 AM, Szabadi Miki: Press 3 help itt vagyok gyere légyszi 😀
March 29, 2025 at 1:47 AM, Csanálosi Gábor FA: Solved
March 29, 2025 at 1:53 AM, Csanálosi Gábor FA: Kész
March 29, 2025 at 1:59 AM, Szappanos Gábor: Gyertek legyszi coating aníd 1 re sos
March 29, 2025 at 1:59 AM, 박정근(Park): 안녕하세요 혹시 AGV야간대응해주시는 한국분 계시나요?
March 29, 2025 at 2:00 AM, 박정근(Park): 음극코터1라인 Foil AGV 2차례 실패로 라인정지될 우려가 있어 긴급대응 부탁드립니다.

Chunk 428:
March 29, 2025 at 2:02 AM, Szappanos Gábor: Megállt a fóliás agv keresztbe a bevezető úton. Lefog fogyni a fókiánk
March 29, 2025 at 2:02 AM, 배일명: 추가적으로 foil싣린 agv 음2 r/w 1st 막고 있어 r/w roll 취외가 불가능 합니다
March 29, 2025 at 2:02 AM, Csanálosi Gábor FA: Jövök
March 29, 2025 at 2:06 AM, Erik Gerzsenyi: Sziasztok Anod press 1-re 32 perce varunk az agv-re
March 29, 2025 at 2:06 AM, Erik Gerzsenyi: Kerlek nezzetek ra
March 29, 2025 at 2:06 AM, Erik Gerzsenyi: Koszi

Chunk 429:
March 29, 2025 at 2:16 AM, Csanálosi Gábor FA: Kész
March 29, 2025 at 3:06 AM, Nagy Dávid 4: Katod Roll raktárba a 12 számú agv kiált hibára help help köszönöm szépen
March 29, 2025 at 3:07 AM, Nagy Dávid 4: Anod roll raktárban 10 számú agv kiált hibára help help köszönöm szépen
March 29, 2025 at 4:15 AM, Nagy Dávid 4: Anod press 8 R/W 22 számú agv kiált hibára help help köszönöm szépen
March 29, 2025 at 4:16 AM, Szabadi Miki: Megyünk

Chunk 430:
March 29, 2025 at 5:29 AM, Nagy Dávid 4: Katod press 1 robot probléma help help köszönöm szépen
March 29, 2025 at 6:08 AM, Karina Lyzanets: Sziasztok! Slitter Cathode 1 nincs AGV 78 perc Kérek nézzetek meg
March 29, 2025 at 6:08 AM, Karina Lyzanets: Köszönöm
March 29, 2025 at 6:09 AM, Mr.Miti (미티) FA: Nézem!

Chunk 431:
March 29, 2025 at 6:10 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl ———————————— Electrode (3): Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 432:
March 29, 2025 at 6:15 AM, Mohammad Amir: There is a job for RBC1339 , Waiting at E0STKC32_P01. It is Waiting there since 5:57. AGV is not being assigned to it. From MCS side everything is fine. @ACS @FA Check this issue. Thank you very much!
March 29, 2025 at 6:18 AM, Mohammad Amir: Thank you very much for your help! AGV#12 has assigned and started to move . ✅ Thank you very much!

Chunk 433:
March 29, 2025 at 6:34 AM, Powder tréner: Sziasztok szeretnék kérni segítséget,poron anód raktár nem adja ki az anyagot E1PLA021_P02 portra.
March 29, 2025 at 6:35 AM, Mr.Miti (미티) FA: Nézem
March 29, 2025 at 6:40 AM, Mohammad Amir: Please press LR we didn't receive any LR in recent time. Thank you very much!
March 29, 2025 at 6:41 AM, Mr.Miti (미티) FA: LR is on
March 29, 2025 at 6:42 AM, Mr.Miti (미티) FA: I go to powder and check

Chunk 434:
March 29, 2025 at 6:44 AM, Mohammad Amir: Okay ,we didn't receive any LR since since 28th March 19:32. Please press again. Thank you very much!
March 29, 2025 at 6:59 AM, Mr.Miti (미티) FA: Solved!
March 29, 2025 at 7:00 AM, Mohammad Amir: Thank you very much! LR received at 6:56 and job has been created. ✅
March 29, 2025 at 10:34 AM, Kurgya Attila: Segítséget kérek fólia raktárhoz. Köszönöm

Chunk 435:
March 29, 2025 at 10:35 AM, Mohammad Amir: @Mr.Miti (미티) FA Please check E0CNVC51_08_046 there is Port interface Error. Thank you very much!
March 29, 2025 at 11:52 AM, Balogh Ádám: Sziasztok A technikusok szerint ez hozzátok tartozik. Por Katod#2 sornál a raklap fogadó területén el van törve a az egyik prizma ami érzékeli hogy ott a raklap ezmiatt nem tudnak bekérni oda anyagot. Kitudnátok cserélni ezt a prizmát? Port szám: E1PLC021-P02

Chunk 436:
March 29, 2025 at 11:53 AM, Mr.Miti (미티) FA: Hozzánk tartozik
March 29, 2025 at 12:00 PM, Balogh Ádám: Köszi
March 29, 2025 at 2:03 PM, Vlad Danilevskyi: Hello. Anode press 3 AGV R/W problem
March 29, 2025 at 3:00 PM, Balogh Ádám: Sziasztok ezt megtudtatok csinálni ?
March 29, 2025 at 3:01 PM, gutenkunstabelzoltan: Amint talalunk prizmat azonnal! Ido kerdese
March 29, 2025 at 3:02 PM, Balogh Ádám: 4 es sorrol le tudjatok szerelni ?
March 29, 2025 at 3:03 PM, Mr.Miti (미티) FA: Meg mem

Chunk 437:
March 29, 2025 at 3:03 PM, Mr.Miti (미티) FA: Onnan igen
March 29, 2025 at 3:04 PM, Balogh Ádám: Akkor vegyetek le onnan légyszi es rakjatok at azt
March 29, 2025 at 3:31 PM, Mohammad Amir: @Mr.Miti (미티) FA @FA Please check E0CNVC51_08_053 there is INV-01 Run Time over error and it is causing blockage in materials recovery resulting material traffic on the CNV. Thank you very much!
March 29, 2025 at 3:31 PM, gutenkunstabelzoltan: Kesz

Chunk 438:
March 29, 2025 at 3:40 PM, Vlad Danilevskyi: Anode press 3 Agv r/w problem again
March 29, 2025 at 3:43 PM, gutenkunstabelzoltan: Kesz
March 29, 2025 at 3:49 PM, Balogh Ádám: Köszi

Chunk 439:
March 29, 2025 at 6:20 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 10+1/11(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(1+1): Pálosi Róbert (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Szabadi Miki, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Denkó János --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő

Chunk 440:
March 29, 2025 at 6:24 PM, Szappanos Gábor: Sziasztok. Anód roll raktárat megtudjátok nézni. 4 es, es 5 ös számúval van probléma. Köszi.
March 29, 2025 at 6:27 PM, Rácz Dániel / FA: Jövünk
March 29, 2025 at 6:27 PM, Szabadi Miki: Igen mindjárt megyünk
March 29, 2025 at 6:27 PM, Nagy Dávid 4: Anod roll raktár 3 számú agv kiált hibára help help köszönöm szépen
March 29, 2025 at 6:39 PM, Viktoriia Hleba: Sziasztok 3 slitter cathode a szám hibás tárca. Kérem, nézze meg. Köszönöm

Chunk 441:
March 29, 2025 at 6:39 PM, Szabadi Miki: Megyünk
March 29, 2025 at 6:40 PM, Erik Gerzsenyi: Itt allok megvarlak 😁
March 29, 2025 at 6:40 PM, Rácz Dániel / FA: Eljöttem C51_C02-re. STK hibában van, ezért nem mennek a reel tálcák kis türelem
March 29, 2025 at 6:41 PM, Szabadi Miki: Oké rendben 🤘
March 29, 2025 at 6:47 PM, Rácz Dániel / FA: Mr. Baekkel megcsináltuk.
March 29, 2025 at 6:50 PM, Viktoriia Hleba: 2 slitter anode r/w robot problema.
March 29, 2025 at 6:51 PM, Szabadi Miki: Megyek

Chunk 442:
March 29, 2025 at 6:57 PM, Szücs Géza FT-B: Press AN#U UW-nál síró AGV-t sinogassa meg majd valaki légyszives
March 29, 2025 at 7:21 PM, 류종석(RyuJongSeok): coating anode#1 2nd rewinder agv don't move. plz help
March 29, 2025 at 7:23 PM, Szappanos Gábor: Hali anód 1 2 es r/w nel megállt az agv. Legyetek szívessek megnézni. Coating köszi
March 29, 2025 at 7:23 PM, Szappanos Gábor: Sos
March 29, 2025 at 7:24 PM, Szabadi Miki: Megyünk

Chunk 443:
March 29, 2025 at 7:44 PM, Nagy Dávid 4: Katod slitt Conveyor probléma help help köszönöm szépen
March 29, 2025 at 7:45 PM, Szabadi Miki: Megyek
March 29, 2025 at 8:34 PM, Nagy Dávid 4: Anod slitt 1-re nem hozzá az anyagot az agv rá tudnátok nézni köszönöm szépen
March 29, 2025 at 8:41 PM, Anton Mashchenko: Hello, please, come to anode press 3, AGV 7 position error! Thanks!
March 29, 2025 at 8:43 PM, Rácz Dániel / FA: @VK (mcs) please check why not transport roll to E1SLA010_P01.

Chunk 444:
March 29, 2025 at 8:56 PM, VK (mcs): There is no LR Last one was 5:25 AM
March 29, 2025 at 9:15 PM, Szücs Géza FT-B: @Rácz Dániel / FA @Czeilinger Krisztián @Szabadi Miki Coater AN#2 -nél, P01(UW), P02 (RW1) errort üssétek ki légyszives, a gép nem fog termelni. köszönöm szépen
March 29, 2025 at 9:17 PM, Rácz Dániel / FA: @VK (mcs) please check why not transport roll to E1SLA020_P01. Thank you.
March 29, 2025 at 9:19 PM, VK (mcs): Carrier is on AGV 15 and on the way

Chunk 445:
March 29, 2025 at 9:20 PM, Rácz Dániel / FA: Thank you 🙏
March 29, 2025 at 9:20 PM, Rácz Dániel / FA: @Viktoriia Hleba
March 29, 2025 at 11:07 PM, Anton Mashchenko: Come to anode press 3, R/W robot error! Thanks!
March 29, 2025 at 11:11 PM, Rácz Dániel / FA: Sokved
March 29, 2025 at 11:48 PM, Anton Mashchenko: Anode press 3, U/W robot error, help! Thanks!
March 29, 2025 at 11:58 PM, Szabadi Miki: Solved

Chunk 446:
March 30, 2025 at 1:27 AM, Rácz Dániel / FA: @Szabadi Miki ha gondolod menj ki szünetre, mert @Czeilinger Krisztián fent van a poron.
March 30, 2025 at 1:28 AM, Szabadi Miki: Oké
March 30, 2025 at 3:05 AM, Szappanos Gábor: Anód 1 coatinghoz ide tudtok jönni légyszives
March 30, 2025 at 3:05 AM, Rácz Dániel / FA: Jövöj
March 30, 2025 at 3:05 AM, Rácz Dániel / FA: K
March 30, 2025 at 3:26 AM, Rácz Dániel / FA: @Szabadi Miki jössz váltani ?

Chunk 447:
March 30, 2025 at 3:26 AM, Szabadi Miki: Persze már öltözök 1 perc és bent vagyok
March 30, 2025 at 3:43 AM, Nagy Dávid 4: Anod roll raktárban 3 számú agv kiált hibára help help köszönöm szépen
March 30, 2025 at 3:44 AM, Szabadi Miki: Megyek
March 30, 2025 at 3:46 AM, Viktoriia Hleba: 2 slitter anode r/w robot problema. Kérem, nézze meg.
March 30, 2025 at 3:46 AM, Szabadi Miki: Megyek
March 30, 2025 at 5:00 AM, Viktoriia Hleba: 3 slitter anode r/w conveer stop. Kérem, nézze meg.

Chunk 448:
March 30, 2025 at 5:00 AM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 5:00 AM, Szappanos Gábor: Hali. Anod roll 3 as raktár hibába van legyetek szívessek megnézni
March 30, 2025 at 5:00 AM, Szappanos Gábor: Szeretnénk kiveni 2 jumbót de nem tudjuk.
March 30, 2025 at 5:00 AM, Szappanos Gábor: Köszi
March 30, 2025 at 5:01 AM, Rácz Dániel / FA: Itt vagyunk AN slitten amint végzünk megyünk
March 30, 2025 at 5:04 AM, Rácz Dániel / FA: Kész
March 30, 2025 at 5:08 AM, Rácz Dániel / FA: Elindult a raktár

Chunk 449:
March 30, 2025 at 5:28 AM, Szappanos Gábor: Visszajönnétek, mert nem tudom visszaküldeni a jumbót 3 roll raktárba, anód
March 30, 2025 at 5:28 AM, Szappanos Gábor: Bocsi, de nem megy.
March 30, 2025 at 5:28 AM, Szappanos Gábor: Köszi
March 30, 2025 at 5:39 AM, Mr.Miti (미티) FA: Jovok
March 30, 2025 at 5:40 AM, Szücs Géza FT-B: de még 3 perc!
March 30, 2025 at 5:55 AM, Mr.Miti (미티) FA: Ami lent van tekercs az is mehet vissza ?
March 30, 2025 at 5:56 AM, Rácz Dániel / FA: 2 db ot kértek elméletileg

Chunk 450:
March 30, 2025 at 5:56 AM, Mr.Miti (미티) FA: Egy a home stand-en volt egy a lenti buffer ?
March 30, 2025 at 5:57 AM, Mr.Miti (미티) FA: Good megy vissza az is magától 😇
March 30, 2025 at 5:57 AM, Rácz Dániel / FA: 1 db ot én kértem ki home standre

Chunk 451:
March 30, 2025 at 6:18 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 452:
March 30, 2025 at 6:34 AM, Szeitz Flórián: Sziasztok! Anód press 3 ra nem érkezik az anyag.Anod roll raktár 1 stokerben se megfelelő pozícióba van az átadó berendezés. Légyszives nézzétek meg Köszönöm..
March 30, 2025 at 6:34 AM, adambenczik: Megyünk
March 30, 2025 at 6:41 AM, Kurgya Attila: Sziasztok Ma a coating két soron termel, anod 1 és katod 1. A létszámhelyzet miatt szükséges az AGV-k használata. Ebben kérnénk ma a támogatásokat.

Chunk 453:
March 30, 2025 at 6:50 AM, adambenczik: @Mohammad Amir On Electrode, 3 machines are waiting for material, but no delivery is happening, can you check please?
March 30, 2025 at 6:54 AM, (Unknown): This message was deleted.
March 30, 2025 at 6:56 AM, (Unknown): Could you please provide the equipment id ?
March 30, 2025 at 6:57 AM, adambenczik: E1SLA020, E1PRA030 and E1PRA010

Chunk 454:
March 30, 2025 at 7:01 AM, (Unknown): There was an LR from E1SLA020 at 4:50. And job was created Carrier ID RBA1235 And job was cancelled by storage OP action.
March 30, 2025 at 7:07 AM, (Unknown): There is a transport job for E1PRA030. Carrier ID RBA0012 StorageCarrierTransferReply is Success but carrier is not moving. E1PRA010 the transport job is cancelled by storage OP action @FA please check Thank you very much

Chunk 455:
March 30, 2025 at 7:16 AM, Karina Lyzanets: Sziasztok! Slitt Anode 2 nincs AGV 25 perc
March 30, 2025 at 7:16 AM, Karina Lyzanets: Kérek nézzetek meg, köszi
March 30, 2025 at 7:16 AM, Mr.Miti (미티) FA: Rajta vagyunk!
March 30, 2025 at 7:17 AM, Karina Lyzanets: Emoticons
March 30, 2025 at 7:40 AM, Mr.Miti (미티) FA: @(Unknown) E0STKA35_P01 There are no material. But RBA1598 is stuck data hete. Please remove
March 30, 2025 at 7:40 AM, (Unknown): Checking

Chunk 456:
March 30, 2025 at 7:40 AM, Mr.Miti (미티) FA: Tű ak you
March 30, 2025 at 7:41 AM, adambenczik: Same situation on E0STKA31
March 30, 2025 at 8:07 AM, Vászon Márton: Katód pressz 2 sincs de gondolom a probléma ugyanaz
March 30, 2025 at 8:12 AM, Mr.Miti (미티) FA: Igen
March 30, 2025 at 8:16 AM, Mr.Miti (미티) FA: ?
March 30, 2025 at 8:19 AM, (Unknown): I have cleared the data from port

Chunk 457:
March 30, 2025 at 8:20 AM, (Unknown): Sorry I forgot to mention that time, because there were multiple messages in the other group chat
March 30, 2025 at 8:22 AM, Mr.Miti (미티) FA: No problem. Thank you very much.
March 30, 2025 at 9:48 AM, Szeitz Flórián: Sziasztok! Mivel anód oldalon használhatatlanok az AGV , ezért kérnék egy út szakaszt felszabadítani ,hogy manuálisan tudjuk vinni az anyagot a press 3-ra . Köszönöm , slittekre visszük a press gépekről..

Chunk 458:
March 30, 2025 at 9:50 AM, adambenczik: Press 3 & 1 és köztes folyosó közötti út jó lesz?
March 30, 2025 at 9:50 AM, Szeitz Flórián: Igen.
March 30, 2025 at 9:50 AM, Szeitz Flórián: This message was deleted.
March 30, 2025 at 9:51 AM, Szeitz Flórián: Ès jelezetek ,ha már tudjuk használni. Köszönöm
March 30, 2025 at 10:01 AM, adambenczik: Manuálba raktam őket, de nem mindet, mert ahogy látom némelyiknek van feladata

Chunk 459:
March 30, 2025 at 10:59 AM, Szeitz Flórián: Amiket hozott rosszul anód press 1 re vitte a presselt anyagot.
March 30, 2025 at 11:00 AM, Mr.Miti (미티) FA: Automataba. Nagyon szuper
March 30, 2025 at 11:07 AM, Mr.Miti (미티) FA: @(Unknown) In automatic mode, the AGV already pressed material transfered to press the press and transferred unpressed material to slitt . Please check
March 30, 2025 at 11:08 AM, (Unknown): Could you please provide carrier ID?

Chunk 460:
March 30, 2025 at 11:09 AM, Mr.Miti (미티) FA: @Szeitz Flórián légyszíves az érintett carrier id-kar megadni. Köszönöm szépen!
March 30, 2025 at 11:22 AM, Szeitz Flórián: An. Slitt 2re préseletlen hozott Lot ID. EA2P081F3144A és ez Hyundai. Anyag pluszba
March 30, 2025 at 11:24 AM, Szeitz Flórián: Anód press 3ra Fordot hozott. EA1P073F35A41
March 30, 2025 at 11:24 AM, adambenczik: Katód Slitt 1 készenáll

Chunk 461:
March 30, 2025 at 11:27 AM, Szeitz Flórián: Vissza állunk manuális hozatalra mert ez így nagyon nem jó
March 30, 2025 at 11:28 AM, Szeitz Flórián: Anód oldalon.
March 30, 2025 at 11:37 AM, (Unknown): This message was deleted.
March 30, 2025 at 11:39 AM, (Unknown): Carrier ID RBA1171 Lot ID. EA2P081F3144A The job was created for press unit 3.
March 30, 2025 at 11:40 AM, Szeitz Flórián: Ez a Lot a Slitt 2 re érkezett a press 3 helyett. Most manuálisan áthoztuk.

Chunk 462:
March 30, 2025 at 11:43 AM, Szeitz Flórián: Press 3 buffer tárolóba most jót hozott . Lot ID EA2P081F31449
March 30, 2025 at 11:45 AM, Szeitz Flórián: Slitt2 re is most jót hozzott a buffer tárolóba. LoT ID EA1P073F352881.
March 30, 2025 at 11:45 AM, Mr.Miti (미티) FA: Remélhetőleg normalizálódik akkor
March 30, 2025 at 12:37 PM, Powder tréner: Sziasztok,poron Katód air showerben elakadt az AGV.Szeretnék kérni segítséget.
March 30, 2025 at 12:38 PM, Mr.Miti (미티) FA: Szia! Rendben megnézzük

Chunk 463:
March 30, 2025 at 2:06 PM, Powder tréner: S.O.S megint elakadt az AGV air showerben.
March 30, 2025 at 2:07 PM, Mr.Miti (미티) FA: A felmentő sereg úton van 😇
March 30, 2025 at 3:32 PM, Kurgya Attila: Szia Tudnátok jönni coating katod 1hez?
March 30, 2025 at 6:16 PM, Anton Mashchenko: Hello, please, come to anode slitt 1, r/w robot no work! Help!

Chunk 464:
March 30, 2025 at 6:16 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(5): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián, Gégény Dávid --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János ---------

Chunk 465:
March 30, 2025 at 6:22 PM, Kertész Dániel: We're going
March 30, 2025 at 6:31 PM, Szücs Géza FT-B: This message was deleted.

Chunk 466:
March 30, 2025 at 6:34 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 467:
March 30, 2025 at 6:40 PM, Nagy Dávid 4: Anod slitt 1 tálca probléma help help köszönöm szépen
March 30, 2025 at 6:41 PM, Anton Mashchenko: This problem again, come to anode slitt 1
March 30, 2025 at 6:42 PM, Nagy Dávid 4: Anod slitt 1 18 számú agv kiált hibára help help köszönöm szépen
March 30, 2025 at 6:43 PM, Kertész Dániel: Kész
March 30, 2025 at 6:43 PM, Kertész Dániel: Kész
March 30, 2025 at 7:00 PM, Szappanos Gábor: Hali. Coating katód 1 hez szeretnék segítséget kérni

Chunk 468:
March 30, 2025 at 7:00 PM, Szappanos Gábor: Leszedőprobléma van
March 30, 2025 at 7:02 PM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 7:50 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 30, 2025 at 7:53 PM, Szappanos Gábor: Hali, katód 1 nél coating a 11 es számú agv letiltott. Legyetek szívesek megnézni. Köszi
March 30, 2025 at 7:59 PM, Csanálosi Gábor FA: Fggf

Chunk 469:
March 30, 2025 at 8:00 PM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 9:03 PM, 박정근(Park): Cathode coating 1Line RW2 agv not working pls come
March 30, 2025 at 9:08 PM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 9:27 PM, Viktoriia Hleba: Cathode AGV #21 stop. Kérem, nézze meg. Köszönöm
March 30, 2025 at 9:31 PM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 9:34 PM, Rácz Dániel / FA: Megyen
March 30, 2025 at 9:50 PM, Rácz Dániel / FA: @Kertész Dániel itt vagyunk Fólia raktárban.

Chunk 470:
March 30, 2025 at 11:26 PM, Nagy Dávid 4: Anod press 2 mögött a 24 számú agv kiált hibára help help köszönöm szépen
March 30, 2025 at 11:27 PM, Czeilinger Krisztián: Kész.
March 30, 2025 at 11:28 PM, Nagy Dávid 4: Anod slitt 1 nem jön az anyag nézetek rá légyszíves köszönöm szépen
March 30, 2025 at 11:29 PM, Czeilinger Krisztián: A 17-es AGV úton van az anyaggal, a 24-es AGV tartotta fel.
March 30, 2025 at 11:29 PM, 류종석(RyuJongSeok): Coating cathode 1 agv stop.

Chunk 471:
March 30, 2025 at 11:30 PM, Rácz Dániel / FA: Jövünk
March 30, 2025 at 11:40 PM, Viktoriia Hleba: Cathode AGV #21 stop. Kérem, nézze meg. Köszönöm
March 30, 2025 at 11:43 PM, Rácz Dániel / FA: Megyünk
March 30, 2025 at 11:45 PM, Czeilinger Krisztián: Solved.
March 30, 2025 at 11:46 PM, Czeilinger Krisztián: Kész.
March 31, 2025 at 12:42 AM, Csanálosi Gábor FA: E0CNVA51 Porthiba @Czeilinger Krisztián
March 31, 2025 at 12:44 AM, Erik Gerzsenyi: Anod slitt 2 coveyor problemank van

Chunk 472:
March 31, 2025 at 12:44 AM, Erik Gerzsenyi: Kerlek nezzetek meg
March 31, 2025 at 12:44 AM, Erik Gerzsenyi: Koszi
March 31, 2025 at 12:44 AM, Kertész Dániel: Egy pillanat és itt is vagyunk
March 31, 2025 at 12:46 AM, Kertész Dániel: Kész is
March 31, 2025 at 1:19 AM, Szücs Géza FT-B: CNVA51 dír
March 31, 2025 at 1:20 AM, Szücs Géza FT-B: sír beavatkozás szükséges
March 31, 2025 at 1:24 AM, Rácz Dániel / FA: Jövök
March 31, 2025 at 1:27 AM, Rácz Dániel / FA: Sokved

Chunk 473:
March 31, 2025 at 1:36 AM, Szücs Géza FT-B: szloved 🤣
March 31, 2025 at 2:43 AM, Rácz Dániel / FA: @Kertész Dániel @Pálosi Róbert Kicsit késünk. 😃
March 31, 2025 at 3:22 AM, Szücs Géza FT-B: @Czeilinger Krisztián A32 TR légyszi nézzétek meg
March 31, 2025 at 3:26 AM, Rácz Dániel / FA: Itt is vagyok
March 31, 2025 at 3:26 AM, Szücs Géza FT-B: köszönöm szépen
March 31, 2025 at 3:36 AM, Viktoriia Hleba: 1 -2 slitter cathode konveer stop. Kérem, nézze meg! Köszönöm

Chunk 474:
March 31, 2025 at 3:37 AM, Rácz Dániel / FA: Jövök
March 31, 2025 at 3:44 AM, Rácz Dániel / FA: Kész
March 31, 2025 at 4:19 AM, Szücs Géza FT-B: @Pálosi Róbert légyszives STK A34-et nézzétek meg köszönöm szépen
March 31, 2025 at 4:19 AM, Pálosi Róbert: Nézzük
March 31, 2025 at 4:29 AM, Pálosi Róbert: Kész
March 31, 2025 at 5:21 AM, Rácz Dániel / FA: Solved 😎

Chunk 475:
March 31, 2025 at 5:59 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:8/12 Overtime (0):- Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(2): Magyar Balázs, Nagy Gábor
March 31, 2025 at 10:09 AM, 조혜근: @FA AGV No. 21 is stopped in the hallway next to the cathode press No. 3. Please check it out

Chunk 476:
March 31, 2025 at 10:13 AM, Szabadi Miki: Checking
March 31, 2025 at 11:05 AM, Shakir (MCS): @Szabadi Miki @FA Please check E0STKA34, Load collapse Error(right). Some jobs are getting delayed. Thank you
March 31, 2025 at 11:10 AM, Turianytsia Olesia: Törött szállítószalag Anod Slitt 3
March 31, 2025 at 11:13 AM, Szabadi Miki: Nemsoká megyünk
March 31, 2025 at 11:15 AM, Shakir (MCS): Now the issue has been resolved. Thank you

Chunk 477:
March 31, 2025 at 1:33 PM, Somoskövy Martin: Sziasztok. Anode 4-es roll raktár kiállt hibára. Megnéznétek? Köszönöm.
March 31, 2025 at 1:34 PM, Szabadi Miki: Megyünk
March 31, 2025 at 2:34 PM, Majláth Martin: Sziasztok anod press 3 uw ki állt hibára. Valaki tud sekíteni? Köszi
March 31, 2025 at 3:55 PM, Szarka Adrián: Sziasztok anod 4 roll raktár ki állt hibára gyertek kerlek köszönöm

Chunk 478:
March 31, 2025 at 3:55 PM, Shakir (MCS): @FA Please check E0STKA34_P01 port is OOS, causing RBA1386 job delayed for Press3. Thank you
March 31, 2025 at 3:55 PM, Szabadi Miki: Checking
March 31, 2025 at 4:03 PM, Shakir (MCS): Carrier started to move agv#05 has been assigned. Issue has been resolved ✅ Thank you
March 31, 2025 at 4:11 PM, Szabadi Miki: Very welcome
March 31, 2025 at 6:07 PM, 유병일: This message was deleted.

Chunk 479:
March 31, 2025 at 7:06 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi April 1, 2025 at 1:47 AM April 1, 2025 at 1:47 AM, Koska Szilárd János : Sziasztok segítséget kérnék anód press 1 mögött lerobbant az Agv April 1, 2025 at 1:47 AM, Skwarek Tibor : Megyek April 1, 2025 at 5:17 AM, Koska Szilárd János : Idetudnárok jönni Anód press1 hez RW nél kiált hibára az agv April 1, 2025 at 5:18 AM, Skwarek Tibor : Megyek April 1, 2025 at 6:08 AM, Turianytsia Olesia : Az átvitel nem működik, a szállítószalag nem vette fel az anyagot az A oldalról cathode slitt 2 April 1, 2025 at 6:12 AM, Szabadi Miki : Uton vagyunk April 1, 2025 at 6:12 AM, Somoskövy Martin : Sziasztok. Anode Slitt 1-re nagyon lassan vagy nem is érkezik üres tálca. Ránéznétek? Köszönöm. April 1, 2025 at 6:14 AM, Mohammad Amir : Checking April 1, 2025 at 6:15 AM, Mohammad Amir : Empty trays on the way ✅. Thank you very much! April 1, 2025 at 6:16 AM, Somoskövy Martin : Thank you. April 1, 2025 at 6:16 AM, Mohammad Amir : You are welcome! We are monitoring the situation. April 1, 2025 at 6:28 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:8/12+1 overtime Overtime (1): Boromisza Zoltán Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Boromisza Zoltán April 1, 2025 at 6:33 AM, Mohammad Amir : Empty trays transfer have been normalised ✅. Thank you very much! April 1, 2025 at 6:55 AM, Mohammad Amir : @FA @Szabadi Miki Please check and confirm us which material is actually exists on E0STKA51_P03_OP01 ? We need this information cause there is a long queue of materials waiting for the recovery at E0CNVA51. Thank you very much! April 1, 2025 at 7:02 AM, Yena Valerii : Hello. agv number 1 is with an error near the 2nd press anode, please correct April 1, 2025 at 7:05 AM, Dániel Hufnágel : Just a moment please April 1, 2025 at 7:07 AM, Mohammad Amir : @FA @Dániel Hufnágel Please confirm us which carrier exists at E0STKA51_P03_OP01 ? There is a long queue of materials waiting on the CNVA51. Thank you very much! April 1, 2025 at 7:24 AM, Mohammad Amir : @FA @Dániel Hufnágel This issue still exists and CNVA51 is getting filled with materials. Thank you very much! April 1, 2025 at 7:24 AM, Turianytsia Olesia : Nincs AGV 30 perc anode slitt 1 April 1, 2025 at 7:24 AM, Mohammad Amir : Checking April 1, 2025 at 7:27 AM, Mohammad Amir : @FA @Dávid F.A. @ACS Please check AGV#18 has assigned and departed since 6:53 but it is not moving since 6:53. Thank you very much! April 1, 2025 at 7:30 AM, Dániel Hufnágel : Just a moment and i check it April 1, 2025 at 7:30 AM, Mohammad Amir : Thank you very much 🙏. April 1, 2025 at 7:32 AM, Dániel Hufnágel : Please be patient! For today we work with low membership April 1, 2025 at 7:32 AM, Mohammad Amir : Understand, Thank you very much! April 1, 2025 at 7:51 AM, Szabadi Miki : Agv#1 úton van April 1, 2025 at 7:52 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVA51_06_006/07 there is INV-01 Run Time over Error. Thank you very much! April 1, 2025 at 7:52 AM, Szabadi Miki : Checking April 1, 2025 at 9:09 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0STKC51 there is Fork#1 Load Position Error when Active . Thank you very much! April 1, 2025 at 9:44 AM, 유병일 : This message was deleted. April 1, 2025 at 5:40 PM, 오승주 invited 송치섭. April 1, 2025 at 5:40 PM, 오승주 : . April 1, 2025 at 6:35 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 2025.Apr Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 1, 2025 at 7:26 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cathode roll STKC33 Travel exact position error! Thank you April 1, 2025 at 7:30 PM, Skwarek Tibor : Checking April 1, 2025 at 7:35 PM, Skwarek Tibor : Done April 1, 2025 at 7:58 PM, K.Krisz Coating : Kérnék valakit kat 1-hez,agv használat egyeztetés céljából. Kösze April 1, 2025 at 7:58 PM, Skwarek Tibor : Megyek April 1, 2025 at 8:11 PM, Mészáros Arnold invited Kertész László. April 1, 2025 at 10:48 PM, 최재균 : @FA 한국분 현장에 계신가요 ? 양극1라인으로 와주실수 있을까요 ? April 1, 2025 at 10:52 PM, 최재균 : 전극 코팅 양극 1 라인 입니다. U/w AGV 사용후 현재 문제가 있어 테크니션이 조치중이긴 한데 어려움을 겪고 있는것으로 보입니다. 시간이 지체되면 설비를 멈춰야 합니다. April 1, 2025 at 10:54 PM, Baek Hojong(백호종)FA : 제가 가겟습니다 April 1, 2025 at 11:07 PM, Oláh Rajmund : Sziasztok gyertek legyszives anode slitt 1 re transzfer problema April 1, 2025 at 11:30 PM, Oláh Rajmund : Gyertek legyszives coating fólia raktárhoz ki állt hibara Koszonom April 1, 2025 at 11:30 PM, Skwarek Tibor : Megyek April 1, 2025 at 11:34 PM, Skwarek Tibor : Kész April 2, 2025 at 12:40 AM April 2, 2025 at 12:40 AM, K.Krisz Coating : Kat 1 /2 r/w agv nem müködik,gyertrk légyszives April 2, 2025 at 12:41 AM, K.Krisz Coating : Vagyis az agv hivás része. April 2, 2025 at 12:43 AM, K.Krisz Coating : Abnormal position April 2, 2025 at 12:44 AM, Kertész Dániel : @Skwarek Tibor April 2, 2025 at 12:44 AM, Skwarek Tibor : Megyünk April 2, 2025 at 12:50 AM, Skwarek Tibor : Transfer alaphelyzetbe lett téve. Így működni fog. April 2, 2025 at 6:15 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 2, 2025 at 6:28 AM, Mohammad Amir : @Zsolt F.A. @FA Please check E0STKC51_C02 there is Fork#1 load request position error when active. Thank you very much! April 2, 2025 at 7:13 AM, 오승주 : FA 한국 담당자분 계실까요? 양극 1라인 2번 리와인더 쪽 AGV 확인 필요합니다. April 2, 2025 at 7:19 AM, Kurgya Attila : Sziasztok Gyertek légyszíves coatingra katod 1es sorhoz. A 2es R/W-ről nagyon lassan veszi le az agv a roll-t. Nézzétek meg hogy tudtok-e rajta javítani valamit. Köszönöm April 2, 2025 at 7:36 AM, Mohammad Amir : @FA @Zsolt F.A. Please check E1CTA040_P01 is OOS and because of this one job is alternated. Thank you very much! April 2, 2025 at 8:09 AM, Mohammad Amir : @FA @Zsolt F.A. Please check E0CNVC51_08_052/053 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! April 2, 2025 at 8:13 AM, 유병일 : @Mr.Miti (미티) FA hello please check ca agv#3 with ca coater 1line April 2, 2025 at 8:14 AM, 유병일 : solved now thank you April 2, 2025 at 8:19 AM, Mohammad Amir : Please check because of this issue materials are causing traffic on the CNVC51. Thank you very much! April 2, 2025 at 8:38 AM, Mohammad Amir : This error exists since 8:03 and blocking materials recovery. Thank you very much! April 2, 2025 at 9:27 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA13_C01 there is Fork#1 Receive Data Error. Thank you very much! April 2, 2025 at 9:32 AM, Kurgya Attila : Sziasztok Gyertek légyszi coating anod 1hez. Fólia agv kiállt hibára Köszönöm April 2, 2025 at 9:49 AM, Szeitz Flórián : Sziasztok! Anod press1re hozott egy roll-t az de nincs rajta lot szám. Nézétek vissza mely Carrier ID érkezett ide . Köszönöm. Amit most tesz fel a buffer tárolóba az előttire vagyok kíváncsi. April 2, 2025 at 9:52 AM, Mr.Miti (미티) FA : EA1P073F35594 April 2, 2025 at 9:53 AM, Sazzad Bhai SKon : Carrier id: RBA0900 April 2, 2025 at 9:55 AM, Mohammad Amir : For you information:- It was an automatic job with RBA0900 created at 9:06 on receiving LR from E1PRA010_P01. Thank you very much! April 2, 2025 at 10:15 AM, 김대호 (Kim Dae Ho) : Please check the signal of Anode sliter 5 L/R @Mohammad Amir April 2, 2025 at 10:15 AM, Mohammad Amir : Checking! April 2, 2025 at 10:17 AM, duzzaman Md (MCS) : There is no LR. Thanks April 2, 2025 at 10:18 AM, Mohammad Amir : Please LR for this machine. Thank you very much! April 2, 2025 at 10:24 AM, 김대호 (Kim Dae Ho) : Please check the L/R signal one more time! April 2, 2025 at 10:25 AM, Mohammad Amir : We received LR at 10:23. But Port Disp Mode is N. Please check this . Thank you very April 2, 2025 at 10:39 AM, Mohammad Amir : We have fixed the issue ✅ Please press LR again. Thank you very much! April 2, 2025 at 10:42 AM, Vlad Danilevskyi : Hello. Anode press 2 AVG r/w problem. Thanks April 2, 2025 at 10:46 AM, 김대호 (Kim Dae Ho) : Buffer mode is in use. Even if there is no l/r of the facility, if the buffer is empty, the roll must come. April 2, 2025 at 10:46 AM, Sazzad Bhai SKon : Yes we understand. But buffer p05 is oos April 2, 2025 at 10:47 AM, 김대호 (Kim Dae Ho) : Are you checking Fa? April 2, 2025 at 10:49 AM, Mohammad Amir : @FA Could you please check E1SLA050_P05 is OOS ,it is a buffer port. Thank you very much! April 2, 2025 at 11:07 AM, Kurgya Attila : Gyorsan-gyorsan katod 1en megállunk, nem jön agv a rollért April 2, 2025 at 11:09 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA51_P03 there is Run Time over error and it is blocking material recovery. Thank you very much! April 2, 2025 at 12:31 PM, Kurgya Attila : Sziasztok Segítséget kérek. Katod 1re rossz fóliát hozott az agv. Segítsetek légyszi visszarakni a raktárba. Köszönöm April 2, 2025 at 1:38 PM, 김태현 : @FA AGV담당자분 양극1라인 와주세요 작업자들이 해결을못하고있어요 April 2, 2025 at 1:39 PM, 김태현 : 해결된거같습니다 April 2, 2025 at 1:43 PM, 연해리 invited 김지수PM(Gyuri)_FA. April 2, 2025 at 1:47 PM, 김대호 (Kim Dae Ho) : Anode sliter 5 agv retry count Exceeded 받을때마다 발생합니다. April 2, 2025 at 1:49 PM, 김대호 (Kim Dae Ho) : Fa측 임시조치만 하는중인데 담당자분 확인 부탁드립니다. Agv 설비로 진입시 육안 확인상 사선으로 들어갑니다. April 2, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 최대운 매니저님과 현장확인 부탁드립니다. April 2, 2025 at 1:52 PM, 김태현 : FA 담당자분 코팅 양극1라인 와주세요 April 2, 2025 at 1:56 PM, Kurgya Attila : Coating Katod 1 áll agv probléma miatt April 2, 2025 at 1:59 PM, cehmannzsoltcehmann : Gordiuszi csomó elhárítva mennek az agv-k April 2, 2025 at 2:03 PM, Kurgya Attila : Nem csak azzal van a gond April 2, 2025 at 2:04 PM, 김지수PM(Gyuri)_FA : 넵, 가고있습니다. April 2, 2025 at 2:04 PM, KIM SEYEON [김세연]_FA : Photo April 2, 2025 at 2:52 PM, 이승민 : 지금 롤 양극 2번창고 현재 버퍼랑 홈스탠드에 둘다 화물있는데 agv화물든거 또 명령받고 들어갔는데 확인부탁드립니다. April 2, 2025 at 2:58 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKA13_C01 there is SCP Main Power CP trip error. Thank you very much! April 2, 2025 at 3:21 PM, Vászon Márton : Katód 1 2 presszre nem érkeznek a préseletlen tekercsek, ennek van valami oka amiről tudtok? Ha nincs nézzetek utána légyszíves April 2, 2025 at 3:27 PM, Mohammad Amir : For Cathode Press -1 please press LR again. Thank you! April 2, 2025 at 3:27 PM, gutenkunstabelzoltan : Nem tudom miert nem mennek semmi hiba semmi nincs utban April 2, 2025 at 3:27 PM, Mohammad Amir : We are checking ! April 2, 2025 at 3:28 PM, Mohammad Amir : For Cathode Press-2 RBC1434 on the way. ✅ Thank you very much! April 2, 2025 at 3:31 PM, Mohammad Amir : @Vászon Márton please check this. Thank you! April 2, 2025 at 3:33 PM, Vászon Márton : Katod 2 3 db érkezett katod 1, 0 db April 2, 2025 at 3:33 PM, Mohammad Amir : Yes , please press LR for Cathode Press-1. Thank you very much! April 2, 2025 at 3:35 PM, Mohammad Amir : LR=Load request. April 2, 2025 at 3:35 PM, Vászon Márton : What is LR April 2, 2025 at 3:36 PM, Mohammad Amir : It is Load Request. April 2, 2025 at 3:36 PM, Mohammad Amir : There was issue with previous Load request that's why I am requesting you to press again. Thank you! April 2, 2025 at 4:12 PM, Mr.Miti (미티) FA : I press it again But nothing April 2, 2025 at 4:12 PM, Mr.Miti (미티) FA : No way. Its ok April 2, 2025 at 4:12 PM, Mr.Miti (미티) FA : 😇 April 2, 2025 at 4:15 PM, Mohammad Amir : Job has created ✅ RBC1433 on the way. Thank you very much! April 2, 2025 at 4:21 PM, Mohammad Amir : For your information:- RBC1433 reached Cathode Press-1 at 16:19. Thank you very much! April 2, 2025 at 6:08 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 2, 2025 at 6:18 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.04.02 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen April 2, 2025 at 6:25 PM, Viktoriia Hleba : Sziasztok 3 slitter cathode 2 nd RW robot stop. April 2, 2025 at 6:35 PM, Erik Gerzsenyi : Sziasztok Katod press 1 mellett 4 AGV all April 2, 2025 at 6:35 PM, Erik Gerzsenyi : 2 jumboval April 2, 2025 at 6:35 PM, Erik Gerzsenyi : Legyszi nezzetek meg April 2, 2025 at 6:55 PM, Rácz Dániel / FA : EL GF CA AGV #15 kivéve a termelésből. April 2, 2025 at 7:08 PM, Rácz Dániel / FA : 3417 April 2, 2025 at 7:30 PM, Viktoriia Hleba : 3 slitter cathode nincs AGV- 15 perc April 2, 2025 at 7:34 PM, Czeilinger Krisztián : Megyünk April 2, 2025 at 7:48 PM, Viktoriia Hleba : ? AGV nincs - 30 perc. April 2, 2025 at 7:50 PM, Nagy Dávid 4 : Katod slitt 3 agv nincsen 30 perce help help köszönöm szépen sos April 2, 2025 at 7:54 PM, Shahbaz 샤바즈 MCS/RTD : @FA Job was created with RBC0624 for Ca slitter 3 and AGV#16 was assigned but alarm reported at E0STKC32_P01. Please check. Thank you. April 2, 2025 at 8:05 PM, Erik Gerzsenyi : Has not arrived yet April 2, 2025 at 8:09 PM, Pálosi Róbert : In working April 2, 2025 at 8:10 PM, Pálosi Róbert : Ready April 2, 2025 at 8:20 PM, Rácz Dániel / FA : EL GF CA AGV #10 kivéve a termelésből. ACS kommunikáció hiba miatt. April 2, 2025 at 8:22 PM, Nagy Dávid 4 : Anod slitt 3 nincsen agv 30 perce help help köszönöm szépen April 2, 2025 at 8:24 PM, Shahbaz 샤바즈 MCS/RTD : Currently no lot available for anode slitter unit 3. April 2, 2025 at 8:28 PM, Nagy Dávid 4 : Anod roll raktárban az 5-ös számú agv kiált hibára help help köszönöm szépen April 2, 2025 at 8:43 PM, Anton Mashchenko : Hello, cathode press 1, AGV not coming 20 min! Help! Location R/W! Thanks! April 2, 2025 at 8:47 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD please check ! Thank you ! April 2, 2025 at 8:50 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD are we again push the UL ? April 2, 2025 at 8:50 PM, Shahbaz 샤바즈 MCS/RTD : The job for RBC1693 was cancelled by Rail Op action at 20:17 April 2, 2025 at 8:53 PM, Shahbaz 샤바즈 MCS/RTD : I was AGV#10, I think there was an AGV communication issue as you wrote above April 2, 2025 at 8:53 PM, Rácz Dániel / FA : Ohh thank you April 2, 2025 at 8:53 PM, Shahbaz 샤바즈 MCS/RTD : You can request again April 2, 2025 at 8:54 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD thank you for the help 🙏 April 2, 2025 at 8:54 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome ☺️ April 2, 2025 at 8:59 PM, Rácz Dániel / FA : EL GF AN E1PRA080_P02 portnál a E0JGVA01_VC01 bent áll. MrLee ott van és laptopozza. April 2, 2025 at 9:02 PM, Szücs Géza FT-B : ez lehetetlen, most ment ki cigizni April 2, 2025 at 9:03 PM, Viktor Vadas : Sziasztok, segitseget szeretnenk kerni Coating folia raktarhoz, a folia AGV megakadt a fotocellas ajtoban. April 2, 2025 at 9:03 PM, Rácz Dániel / FA : Kis türelem a fényképezőre várunk. Köszi. April 2, 2025 at 9:09 PM, Nagy Dávid 4 : Anod slitt 3 nincsen anyag 78 perce van valami infó erről????? Help help köszönöm szépen April 2, 2025 at 9:11 PM, Szücs Géza FT-B : @ MCS please check Port need material. E1SLA_P01 April 2, 2025 at 9:11 PM, Szücs Géza FT-B : E1SLA030_P01 April 2, 2025 at 9:13 PM, Shahbaz 샤바즈 MCS/RTD : Materials available for slitting: Anode: Unit 1 & 2 : 108 Unit 3 : 0 Cathode: Unit 1,2,3: 54 April 2, 2025 at 9:13 PM, Szücs Géza FT-B : thank you very much April 2, 2025 at 9:13 PM, Szücs Géza FT-B : nincs rá anyag az MCS szerint April 2, 2025 at 9:17 PM, Nagy Dávid 4 : Rendben köszönöm szépen April 2, 2025 at 9:23 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD please reset the RTD Temp ID password. Thank you April 2, 2025 at 9:24 PM, Rácz Dániel / FA : TEMP April 2, 2025 at 9:27 PM, Shahbaz 샤바즈 MCS/RTD : I initiated reset, please set the password. April 2, 2025 at 9:30 PM, Rácz Dániel / FA : No good April 2, 2025 at 9:48 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD please check this material. PX2931-S0001. Thank you. April 2, 2025 at 9:57 PM, Shahbaz 샤바즈 MCS/RTD : This carrier id is not in the system. According to log the last time it was transferred to E0STK001_M03 from E0STK002_0200107 on 09-01-25 13:38. April 2, 2025 at 10:00 PM, Rácz Dániel / FA : @Viktor Vadas April 2, 2025 at 10:00 PM, Rácz Dániel / FA : Thank you for the information. April 2, 2025 at 10:12 PM, Viktor Vadas : Koszonom a segitseget! April 2, 2025 at 10:12 PM, Viktor Vadas : Thanks! April 2, 2025 at 10:29 PM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Felmentünk a porra a @Pintye Miklós FA. al ! Késni fogunk. April 2, 2025 at 10:36 PM, Czeilinger Krisztián : @Rácz Dániel / FA rendben. April 2, 2025 at 11:55 PM, Nagy Dávid 4 : Katod Roll raktárban agv kiált hibára help help köszönöm szépen April 2, 2025 at 11:59 PM, Rácz Dániel / FA : Mindjárt megyünk April 3, 2025 at 12:29 AM April 3, 2025 at 12:29 AM, Viktoriia Hleba : 3 slitter cathode nincs AGV - 15 perc. April 3, 2025 at 12:30 AM, Czeilinger Krisztián : 1es AGV úton van. April 3, 2025 at 12:42 AM, Anton Mashchenko : This message was deleted. April 3, 2025 at 1:07 AM, Viktoriia Hleba : 3 slitter cathode nincs AGV - 16 perc. April 3, 2025 at 1:11 AM, Nagy Dávid 4 : Anod roll raktárban5 számú agv kiált hibára help help köszönöm szépen April 3, 2025 at 1:25 AM, Erik Gerzsenyi : Anod slitt 2-re nezzetek ra kerlek! 15 perce varunk az AGV-re April 3, 2025 at 1:25 AM, Erik Gerzsenyi : Koszonom April 3, 2025 at 1:41 AM, Czeilinger Krisztián : This message was deleted. April 3, 2025 at 1:43 AM, Czeilinger Krisztián : E0STKC34- ől viszi a Chatode slitt 3-ra a 16-os AGV April 3, 2025 at 1:48 AM, Czeilinger Krisztián : Az anode 32-es raktárban vagyunk az 5-ös AGV-el van probléma. April 3, 2025 at 1:59 AM, Rácz Dániel / FA : A32-es raktár lehalt teljesen se ki se be semmi. April 3, 2025 at 3:32 AM, Nagy Dávid 4 : Anod roll raktár 11 számú agv kiált hibára help help köszönöm szépen April 3, 2025 at 3:38 AM, Pálosi Róbert : Kész April 3, 2025 at 4:01 AM, Anton Mashchenko : Please, come to anode press 1, U/W AGV 6 position error! Thanks! April 3, 2025 at 4:20 AM, Pintér Gábor : Sziasztok katód 1 coatingon az üres bobbint szedte le ez a csodás masina😅 April 3, 2025 at 4:23 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Please April 3, 2025 at 5:33 AM, Viktor Vadas : Sziasztok! 11-es AGV robotunk ismetelten megallt ugyanott, Katod Jumbo raktar, a segitsegetek kernenk az utbaigazitashoz! April 3, 2025 at 5:43 AM, Pintye Miklós FA. : Solved April 3, 2025 at 6:36 AM, Kurgya Attila : Sziasztok Segítséget kérek katod 1hez. Agv probléma van. Köszönöm April 3, 2025 at 6:40 AM, Kurgya Attila : Sikerült megoldani April 3, 2025 at 6:52 AM, Kurgya Attila : Segítséget kérek katod 2 U/W leszedőkarok alaphelyzetbe állításához. Köszönöm April 3, 2025 at 6:55 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4: Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 3, 2025 at 7:31 AM, Oleksii Krasnoshchok : Problem with Agv #5 stopped in stoker #4 in storage April 3, 2025 at 7:33 AM, Oleksii Krasnoshchok : Anode side April 3, 2025 at 7:49 AM, Kurgya Attila : Menjetek légyszi katod 1hez April 3, 2025 at 7:52 AM, gutenkunstabelzoltan : Itt vagyunk April 3, 2025 at 8:53 AM, 류종석(RyuJongSeok) : 코팅 양극1라인 UW에 Foil 방향도 반대이고 자재코드도 다른 Foil 왔습니다. 아직 이재기 작동 하지 않아 Foil 척킹은 하지 않은 상황입니다. 조치 부탁 드립니다. April 3, 2025 at 8:55 AM, Kurgya Attila : Gyertek légysz katod 1 U/Whez. Köszönöm April 3, 2025 at 9:17 AM, cehmannzsoltcehmann invited Sárvári Márk. April 3, 2025 at 9:18 AM, cehmannzsoltcehmann invited Magyar Dániel. April 3, 2025 at 9:18 AM, Magyar Dániel : . April 3, 2025 at 9:43 AM, Karina Lyzanets : Sziasztok! Gyertek légyszí az Anode Slitt 5 April 3, 2025 at 9:43 AM, Karina Lyzanets : Köszönöm April 3, 2025 at 9:43 AM, Mr.Miti (미티) FA : Megye April 3, 2025 at 9:43 AM, Mr.Miti (미티) FA : K April 3, 2025 at 10:58 AM, 김대호 (Kim Dae Ho) : Please check Cathode No. 21 Agv April 3, 2025 at 11:02 AM, Shakir (MCS) : @FA Please check agv#21 near press3 CA, safety stopped. Thank you April 3, 2025 at 11:25 AM, Magyar Dániel : Sziasztok! Coating Katód 1-re nem érkeznek meg az AGV-K, mert elvannak akadva roll raktárnál. Valaki legyen szíves jöjjön ki és nézzen rá. April 3, 2025 at 11:28 AM, Mr.Miti (미티) FA : Mennek April 3, 2025 at 11:31 AM, Magyar Dániel : Köszi April 3, 2025 at 11:34 AM, Shakir (MCS) : @FA Please check the port E0STKC35_P01 is OOS having carrier for Press2 Is getting delayed. Thank you April 3, 2025 at 11:39 AM, Shakir (MCS) : Issue has been resolved, AGV#14 assigned. ✅ Thank you April 3, 2025 at 11:41 AM, 류종석(RyuJongSeok) : 코팅 양극 1라인 문제 해결좀 빨리해 주세요 라인 정지 위험 있습니다. April 3, 2025 at 11:44 AM, 서지원 : @KIM SEYEON [김세연]_FA 어제도 1st R/W에서 동일한 문제로 설비 멈추고 loss발생했는데, 조치사항이 없는건가요?? April 3, 2025 at 12:07 PM, 배병민 (Bae Byoungmin) : PM님 안녕하세요 오후에 AGV 운영 대수를 추가하여 진행하도록 하겠습니다. 현장에서 모니터링하면서 진행하겠습니다. April 3, 2025 at 12:23 PM, Sárvári Márk : Sziasztok, megállt az AGV Katód 2nél, segítség kellene, köszi✌️ April 3, 2025 at 12:25 PM, 배일명 : This message was deleted. April 3, 2025 at 12:27 PM, KIM SEYEON [김세연]_FA : @류종석(RyuJongSeok) 혹시 상기현상 Foil id 알수 있을까요? uw에서 lr누르신거죠? rtd로 명령 내리신건지도 확인 필요합니다. April 3, 2025 at 1:26 PM, Karina Lyzanets : Gyertek légyszí az Anode Slitt 5 re April 3, 2025 at 1:26 PM, Karina Lyzanets : Köszönöm szépen April 3, 2025 at 1:36 PM, Kurgya Attila : Katod roll raktárban megrekedt az agv nézzétek meg légyszi April 3, 2025 at 1:46 PM, Shakir (MCS) : @Fa Please check foil stk E0STK001 MCP AP error. Thank you April 3, 2025 at 3:02 PM, Shakir (MCS) : @FA @Sebestyén Dávid Please check Roll STKC31 port P01 is OOS, jobs getting delayed. Thank you April 3, 2025 at 3:10 PM, Vászon Márton : Katód pressz 2 rw oldalon nem viszi a tekercset 20 perce April 3, 2025 at 3:20 PM, cehmannzsoltcehmann : @Shakir (MCS) There is an unload request but the AGV is not coming for the roll. Check please April 3, 2025 at 3:21 PM, Shakir (MCS) : @FA Please check the RBC1801 is not moving from STKC32_P01 for a while MSC side is okay, ACS not assigning the agv. Thank you April 3, 2025 at 3:21 PM, Shakir (MCS) : Please write the equipment name April 3, 2025 at 3:22 PM, 김대호 (Kim Dae Ho) : Please check the Anode Roll Warehouse #4 alarm April 3, 2025 at 3:22 PM, cehmannzsoltcehmann : E1PRC080-TR02-MCP2 April 3, 2025 at 3:25 PM, Shakir (MCS) : This equipment is OOS, NO UR. Thank you April 3, 2025 at 3:26 PM, Shakir (MCS) : @FA @Sebestyén Dávid Dávid Please check Roll STKC35 port P01 is OOS, jobs getting delayed. Thank you April 3, 2025 at 3:29 PM, Shakir (MCS) : AGV#05 has been assigned for carrier to Press2. ✅ Thank you April 3, 2025 at 3:30 PM, cehmannzsoltcehmann : Korean colleagues working in the warehouse April 3, 2025 at 3:36 PM, Karina Lyzanets : Gyertek az Anode Slitt 5 légyszíves Köszönöm April 3, 2025 at 3:48 PM, gutenkunstabelzoltan : Van req initalban van minden auto mod, zöld és mégsem veszi el a transzefer az agvrol a rollt… nemtudok vele mit kezdeni…. April 3, 2025 at 4:12 PM, Karina Lyzanets : Slitt Cathode 3 AGV robot nem hoz az anyagot Nézzetek meg légyszíves April 3, 2025 at 4:12 PM, Karina Lyzanets : Köszönöm April 3, 2025 at 4:21 PM, gutenkunstabelzoltan : Uton van April 3, 2025 at 4:39 PM, Karina Lyzanets : Slitter Anode 5 re gyertek légyszíves April 3, 2025 at 4:40 PM, Karina Lyzanets : Köszi April 3, 2025 at 4:42 PM, 주범진 : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA 안녕하세요 도움 요청 주실 수 있으실까요? 이미 출고된 포일3개를 수동으로 전극창고에 넣어야 합니다. 포일은 gf인바운드에 있습니다. 수동으로 넣어야해서 헝가리테크니션이 진행 불가하다는 얘기를 들어서 요청 드립니다. 금일야간에 대응인원 배치 부탁드려도 될까요? April 3, 2025 at 5:42 PM, Magyar Dániel : Katód 1 Coatingon a 2-es r/w-nél bent maradt valamiféle tesztnek köszönhetően egy AGV... útban van nem tudunk dolgozni tőle, valaki vigye el légyszíves. April 3, 2025 at 6:17 PM, Szappanos Gábor : Hali. Coating katód 1 A oldalon piknikeznek az agv-k. Meg kellene őket noszogatni 1 kicsit. Köszi April 3, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 3, 2025 at 6:24 PM, Czeilinger Krisztián : Megyünk April 3, 2025 at 6:53 PM, Nagy Dávid 4 : Katod press 1 a 7 és a 16 számú agv ütközött help help köszönöm szépen April 3, 2025 at 7:00 PM, KIM SEYEON [김세연]_FA : This message was deleted. April 3, 2025 at 7:06 PM, VK (mcs) : @FA Please check Anode powder STK A12 Light curtain detected error. April 3, 2025 at 7:26 PM, Nagy Dávid 4 : Anod slitt 23 számú agv kiált hibára help help köszönöm szépen April 3, 2025 at 7:26 PM, Nagy Dávid 4 : Kész hiba megoldva April 3, 2025 at 7:27 PM, Nagy Dávid 4 : Anod roll raktárban 17 számú agv kiált hibára help help köszönöm szépen April 3, 2025 at 7:27 PM, Nagy Dávid 4 : Kész hiba megoldva April 3, 2025 at 7:32 PM, 주범진 : 안녕하세요 야간 근무하시는 분 계실까요? April 3, 2025 at 7:32 PM, 이주봉PM LEE JUBONG(FA) : 네 April 3, 2025 at 7:55 PM, Rácz Dániel / FA : @Nagy Dávid 4 hol vagy ? April 3, 2025 at 7:56 PM, Rácz Dániel / FA : AN SL 2 nincs AGV 34:51 April 3, 2025 at 7:58 PM, Nagy Dávid 4 : Szüneten vagyok April 3, 2025 at 8:00 PM, Rácz Dániel / FA : Jó étvágyat April 3, 2025 at 8:00 PM, Rácz Dániel / FA : AN Slitt 5-re kihozott az AGV egy jumbo rollt. Visszaküldöm a raktárba. A transzfert manualba teszem. April 3, 2025 at 8:01 PM, Rácz Dániel / FA : AN AGV #5 April 3, 2025 at 8:01 PM, Rácz Dániel / FA : @Noémi (소미) ezt kérdezte a Mr. Lee műszak elején. April 3, 2025 at 8:02 PM, Noémi (소미) : Köszönöm szépen, átadom neki az információt. April 3, 2025 at 8:03 PM, Rácz Dániel / FA : De ez a gép nem termel. Beszéltem a termelésessel. Visszaküldöm a raktárba a jumbo rollt. April 3, 2025 at 8:05 PM, Rácz Dániel / FA : Nem tudom visszaküldeni, mert nincs carrier ID. 😞 April 3, 2025 at 8:06 PM, Szücs Géza FT-B : hívlak April 3, 2025 at 8:06 PM, Takács Ádám FA Tech left this chatroom. April 3, 2025 at 8:07 PM, Noémi (소미) : @이주봉PM LEE JUBONG(FA) AN AGV #5호기가 슬리터 5호기로 투입했던 롤을 제가 다시 창고로 보낼 예정입니다. 제조팀과 협의했는데 금일 근무 중 슬리터 5호기에서 생산 계획이 없음을 확인하였습니다. April 3, 2025 at 8:09 PM, 이주봉PM LEE JUBONG(FA) : 네 알겠습니다. 감사합니다. April 3, 2025 at 8:10 PM, Noémi (소미) : @Rácz Dániel / FA Rendben, köszönöm szépen. April 3, 2025 at 8:20 PM, Rácz Dániel / FA : Sikerült köszönöm @Szücs Géza FT-B ! April 3, 2025 at 9:33 PM, Viktoriia Hleba : Sziasztok 3 slitter cathode nincs tárca. Kérem, nézze meg! Köszönöm ! April 3, 2025 at 9:49 PM, Rácz Dániel / FA : AGV #13 már úton April 3, 2025 at 9:54 PM, Pálosi Róbert : Itt vagy Dani? April 3, 2025 at 9:56 PM, Rácz Dániel / FA : Igen April 3, 2025 at 9:59 PM, Rácz Dániel / FA : @electrode jó étvágyat ! April 3, 2025 at 10:04 PM, Rácz Dániel / FA : Bocsi ezt benéztem 😅😎 April 3, 2025 at 10:08 PM, Viktoriia Hleba : Nincs semmi baj. April 3, 2025 at 10:12 PM, Rácz Dániel / FA : Már van tálca. A C51-es raktár miatt nem volt. April 3, 2025 at 10:14 PM, Viktoriia Hleba : oke, köszönöm April 3, 2025 at 10:16 PM, Rácz Dániel / FA : AN AGV #5 kèrem ne nyúljon hozzá. Fènyképet kell készíteni. Köszönöm. April 3, 2025 at 10:21 PM, Nagy Dávid 4 : Anod press 1-es gép mögött az 5 számú agv kiált hibára help help köszönöm szépen April 3, 2025 at 10:22 PM, Rácz Dániel / FA : AN AGV #5 kèrem ne nyúljon hozzá. Fènyképet kell készíteni. Köszönöm. April 3, 2025 at 10:33 PM, Rácz Dániel / FA : Kész April 3, 2025 at 10:37 PM, Szappanos Gábor : Hali. Ciating katód 1 nel összeakadtak az agv- k. Legyetek szívesek megnézni. Köszi April 3, 2025 at 10:38 PM, Rácz Dániel / FA : Rendben, mindjárt ott vagyok csak még itt vagyok a C52-es raktárban. April 3, 2025 at 10:38 PM, Rácz Dániel / FA : Bocs C51 April 3, 2025 at 10:53 PM, Rácz Dániel / FA : Jövök April 3, 2025 at 10:55 PM, Szappanos Gábor : Káosz magasfokon...... April 3, 2025 at 10:58 PM, Rácz Dániel / FA : Kész April 3, 2025 at 11:02 PM, Szappanos Gábor : 11 eske megint sír..... April 3, 2025 at 11:02 PM, Szappanos Gábor : Toljátok ki az utcára.... April 3, 2025 at 11:58 PM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Fent vagyok poron. Késni fogok. April 4, 2025 at 12:02 AM April 4, 2025 at 12:02 AM, Czeilinger Krisztián : Rendben Dr.úr April 4, 2025 at 12:41 AM, Rácz Dániel / FA : Jövök vissza porról ! 😃 April 4, 2025 at 12:44 AM, Czeilinger Krisztián : Oksijó. April 4, 2025 at 12:48 AM, Nagy Dávid 4 : Cathode Slitt 1 reel stop robot help help köszönöm szépen April 4, 2025 at 1:07 AM, Rácz Dániel / FA : @Czeilinger Krisztián @Pálosi Róbert by solved April 4, 2025 at 1:13 AM, Nagy Dávid 4 : Cathode Slitt 1 reel stop robot help help köszönöm szépen April 4, 2025 at 1:13 AM, Rácz Dániel / FA : Megyek April 4, 2025 at 1:23 AM, Rácz Dániel / FA : Kész. @Nagy Dávid 4 köszi a segítséget. 🙏 April 4, 2025 at 3:02 AM, Anton Mashchenko : Come to cathode press 1-2, needs to be moved AGV 16 April 4, 2025 at 3:02 AM, Anton Mashchenko : Thanks! April 4, 2025 at 3:05 AM, Anton Mashchenko : No longer needed, thank you! April 4, 2025 at 3:06 AM, Rácz Dániel / FA : OK April 4, 2025 at 4:45 AM, Viktor Vadas : Sziasztok! Coating Katod 1 elott ismet osszeakadt ket AGV April 4, 2025 at 4:49 AM, Rácz Dániel / FA : Jövök April 4, 2025 at 4:52 AM, Rácz Dániel / FA : Kész April 4, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 4, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 04 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 4, 2025 at 7:19 AM, Shakir (MCS) : @Fa @Szabadi Miki Please check the port E0STKA34_P01 is OOS having carrier RBA1856 for slitt2. Job is getting delayed. Thank you April 4, 2025 at 7:21 AM, Hári Zoltàn : Gyertek legyszives a katod 1 coating ra! Itt jarkal feleslegesen a folia agv! Csak utban van, nem hasznaljuk! Megall tole a masik agv stb stb. Legyszi iktassatok ki! Koszonom! April 4, 2025 at 7:22 AM, Mr.Miti (미티) FA : Rendben! April 4, 2025 at 7:41 AM, Mr.Miti (미티) FA : Likvidálás megtörtént 😁 April 4, 2025 at 7:42 AM, Shakir (MCS) : This message was deleted. April 4, 2025 at 7:42 AM, Shakir (MCS) : Issue has been resolved now ✅ AGV#05 on the way Thank you April 4, 2025 at 7:43 AM, Mr.Miti (미티) FA : You’re welcome! 🙏 April 4, 2025 at 7:47 AM, Hári Zoltàn : Koszonom! April 4, 2025 at 8:24 AM, 주범진 : 안녕하세요 ! @fa unit 주간 근무 하시는 pm님들께 도움 요청 드립니다 해당 포일 3개 포트 위에 올라가있어서 창고로 넣어주시기만 하면 됩니다. 위치는 전극gf물류 포일입고창고 입니다 April 4, 2025 at 8:34 AM, Baek Hojong(백호종)FA : 제가 확인해보겠습니다 피엠님 April 4, 2025 at 8:53 AM, 주범진 : 감사합니다 피엠님 April 4, 2025 at 9:39 AM, Somoskövy Martin : Sziasztok. Cathode Slitt 1-en nem teszi rá a tálcára a reelt a kar. Megnéznétek? Köszönöm. April 4, 2025 at 9:40 AM, Mr.Miti (미티) FA : Persze. Érkezem! April 4, 2025 at 9:40 AM, Szabadi Miki : Poron vagyunk ahogy visszaérünk megyünk April 4, 2025 at 9:47 AM, Yena Valerii : please come to the anode roll warehouse, E0STKA31, the door was closed in the wrong order April 4, 2025 at 10:22 AM, Baek Hojong(백호종)FA : 243119-0734N - PS121-2411290024 243118-0724N - PS121-2411290035 243119-0736N - PS121-2411290027 입니다. 창고에 입고했고 이력관리하시기 바랍니다 April 4, 2025 at 10:41 AM, 주범진 : 감사합니다 피엠님 April 4, 2025 at 12:50 PM, Majláth Martin : Sziasztok catod press 1 re szeretnék segítséget kérni. A robot nem veszi le az anyogaot az agv rol April 4, 2025 at 12:59 PM, Mr.Miti (미티) FA : Szia rendben April 4, 2025 at 1:08 PM, Shakir (MCS) : @FA RBA1875 carrier job alternated because of E0STKA34 stk port P01 is OOS. job is getting delayed for slitt2. Thank you April 4, 2025 at 1:09 PM, Szabadi Miki : Checking April 4, 2025 at 1:13 PM, Szabadi Miki : Solved April 4, 2025 at 1:16 PM, Shakir (MCS) : Thank you AGV#22 has been assigned. April 4, 2025 at 1:17 PM, Szabadi Miki : You are welcome April 4, 2025 at 1:18 PM, Mr.Miti (미티) FA : @Shakir (MCS) Please check press CA AGV 21, 13, 14, 09, 07, last order. They all have material but are without a task. April 4, 2025 at 1:19 PM, Shakir (MCS) : Checking April 4, 2025 at 1:20 PM, Mr.Miti (미티) FA : Thank you sir! April 4, 2025 at 1:32 PM, Shakir (MCS) : AGV#13 : last order : E1PRC010_P01, Job terminated at 13:27. AGV#21: last order to E1PRC010_P01 Job terminated at 11:39 April 4, 2025 at 1:33 PM, Mr.Miti (미티) FA : Please check. 🙏 April 4, 2025 at 1:33 PM, Shakir (MCS) : Checking further April 4, 2025 at 1:37 PM, Shakir (MCS) : All agvs job has been terminated. April 4, 2025 at 1:37 PM, Mr.Miti (미티) FA : @Shakir (MCS) We have a problem. E1PRC010 The warehouse continuously sends the material to it. LR is not pressed, there is material in the buffer, the AGV tries to enter once, then deletes the write request and the warehouse generates a new one April 4, 2025 at 1:39 PM, 배병민 (Bae Byoungmin) : This message was deleted. April 4, 2025 at 1:41 PM, Shakir (MCS) : Now There is No LR for this Machine. We will further monitoring April 4, 2025 at 1:47 PM, Szabadi Miki : AGV#01,07,09,21 It has a roll on it, would you send it back to the warehouse? April 4, 2025 at 1:47 PM, Shakir (MCS) : Yes, sure April 4, 2025 at 1:48 PM, Szabadi Miki : Thank you sir! 🙏 April 4, 2025 at 1:58 PM, Shakir (MCS) : Job has been initiated for AGV#01,07,09,21 to its source STK. ✅ AGV on the way. Thank you April 4, 2025 at 2:08 PM, Shakir (MCS) : All the rolls on AGV successfully delivered to the STK ✅ Thank you April 4, 2025 at 2:09 PM, Szabadi Miki : Thank you April 4, 2025 at 2:57 PM, Shakir (MCS) : @Mr.Miti (미티) FA FYI: E1PRC010_P01 job has been created for the CA press1. Is the machine working? April 4, 2025 at 2:57 PM, Shakir (MCS) : Thank you April 4, 2025 at 3:09 PM, Mr.Miti (미티) FA : I check it. A moment April 4, 2025 at 3:11 PM, Shakir (MCS) : AGV#13 successfully transfer the roll inside press1. ✅ Thank you April 4, 2025 at 3:12 PM, Mr.Miti (미티) FA : Ca press working but have material on buffer. and the transfer is now taking one off the AGV. Something is still wrong because the juice on the buffer should be taken off first. April 4, 2025 at 3:58 PM, Shakir (MCS) : @Fa Please check E0STKA34 stk port P01 is OOS. job is getting delayed. Thank you April 4, 2025 at 3:58 PM, Szabadi Miki : Checking April 4, 2025 at 4:00 PM, Szabadi Miki : Korean technician working there April 4, 2025 at 4:00 PM, Shakir (MCS) : Alright, Thank you April 4, 2025 at 4:03 PM, Somoskövy Martin : Sziasztok. Anode Press 2 U/W portban megállt az AGV és nem indul el a felrakási folyamat. Megnéznétek? Köszönöm. April 4, 2025 at 4:03 PM, Szabadi Miki : Megyünk April 4, 2025 at 9:33 PM, Yanina : Sziasztok, Cathode slitt 3 probléma transzfer U/W April 4, 2025 at 9:33 PM, Skwarek Tibor : Megyek April 4, 2025 at 9:37 PM, Skwarek Tibor : Kész April 4, 2025 at 10:40 PM, Yanina : Slitt Cathode 3 probléma transzfer R/W April 4, 2025 at 10:40 PM, Skwarek Tibor : Megyek April 4, 2025 at 10:58 PM, Erik Gerzsenyi : Sziasztok Katod roll raktarba 5-os agv hibara allt es tovabbi 4 all mogotte April 4, 2025 at 10:59 PM, Simon Attila F. A. : Jövök. April 4, 2025 at 10:59 PM, Erik Gerzsenyi : Koszi April 4, 2025 at 11:04 PM, Skwarek Tibor : Katod 5 ös raktárnál keresztbe fordult az agv a transfernél és elmozdította a fényfüggönyt April 4, 2025 at 11:37 PM, VK (mcs) : @FA Please check Cathode roll STK C33 and Auto port STK C35 is out of service. April 5, 2025 at 12:52 AM April 5, 2025 at 12:52 AM, Yanina : Sziasztok, Cathode slitt 3 nincs AGV 1 òra April 5, 2025 at 12:52 AM, Skwarek Tibor : Raktár hiba miatt késett. Érkezik hamarosan. April 5, 2025 at 12:58 AM, Yanina : Köszönöm April 5, 2025 at 1:01 AM, Skwarek Tibor : Szívesen April 5, 2025 at 1:19 AM, Yanina : Szia, Cathode slitt 1 transzfer R/W probléma April 5, 2025 at 1:19 AM, Skwarek Tibor : Megyünk April 5, 2025 at 1:27 AM, Skwarek Tibor : Kész April 5, 2025 at 4:34 AM, KIM SEYEON [김세연]_FA has been reassigned as a host. April 5, 2025 at 6:28 AM, Hári Zoltàn : Sziasztok! Technikust kernek az anod 2 coaterre! Koszi! April 5, 2025 at 6:33 AM, Mr.Miti (미티) FA : Jo reggelt! Megyunk April 5, 2025 at 6:47 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51_06014,13 there is INV-01 Run time Over Error. Thank you very much! April 5, 2025 at 6:52 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Nagy Zsolt Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 5, 2025 at 7:02 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 05 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 5, 2025 at 7:26 AM, Turianytsia Olesia : Nincs AGV 20 perc anode slitt 1 April 5, 2025 at 7:26 AM, Mohammad Amir : Checking April 5, 2025 at 7:26 AM, 김상훈 left this chatroom. April 5, 2025 at 7:28 AM, Szabadi Miki : Same problem with E1PRA020_P01 Can you check ? Thank you! April 5, 2025 at 7:28 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKA34_P01 it is OOS and it is blocking transfer to Anode Slitter -1 ,it is in error since yesterday 23:00. Thank you very much! April 5, 2025 at 7:28 AM, Mohammad Amir : Checking April 5, 2025 at 7:29 AM, Szabadi Miki : Okey checking April 5, 2025 at 7:30 AM, Mohammad Amir : It is also not moving cause of error in E0STKA34_P01, please resolve the error and both carriers will move. I am monitoring the process. Thank you very much? April 5, 2025 at 7:32 AM, Mohammad Amir : Carrier is on the way ,now issue has been resolved ✅. Thank you very much! April 5, 2025 at 7:32 AM, Szabadi Miki : Now it is working roll arrives April 5, 2025 at 7:32 AM, Szabadi Miki : You are welcome April 5, 2025 at 7:33 AM, Mohammad Amir : Yes issue has been resolved materials on the way. ✅ It was not moving cause port P01_STKA34 was OOS since 23:00 04/04/2025 . Now port has came in-service and materials transfer resumed. April 5, 2025 at 7:34 AM, Szabadi Miki : Agv#11 úton April 5, 2025 at 7:37 AM, Turianytsia Olesia : Köszönöm April 5, 2025 at 7:37 AM, Szabadi Miki : Szivesen! April 5, 2025 at 8:12 AM, Mohammad Amir : @Szabadi Miki Please check E0CNVA51_6180 there is Manufacture left-Roll Detect Sensor 01 is Abnormal. Thank you very much! April 5, 2025 at 8:13 AM, Szabadi Miki : Okay checking April 5, 2025 at 8:32 AM, Hári Zoltàn : Legyszi gyertek az anod 2 coaterre! Megprobalnank agv-vel a kövi rollokat! Köszi! April 5, 2025 at 8:33 AM, Szabadi Miki : Rendben megyünk April 5, 2025 at 8:45 AM, Turianytsia Olesia : A szállítószalag nem működik anode slitt 1 April 5, 2025 at 8:46 AM, Szabadi Miki : This message was deleted. April 5, 2025 at 8:51 AM, Somoskövy Martin : Az 1-es R/W nem kapott tálcaszám visszajelzést a transfer-ről. April 5, 2025 at 8:53 AM, Szabadi Miki : Rendben mindjárt nézzük April 5, 2025 at 9:13 AM, Hári Zoltàn : Anod 2 coater: 1-es rw az 1. Jumbót sem sikerült levennie megfelelően. Az unloader feltette a tartóra és abban a pillanatban megállt hibára. Egy technikus itt van probalja megoldani! April 5, 2025 at 9:16 AM, Hári Zoltàn : Anod 2: 2-es rewimder se működik! April 5, 2025 at 9:17 AM, Hári Zoltàn : Oda-vissza, ki-be, aztán ki állt hibára. April 5, 2025 at 9:17 AM, Hári Zoltàn : Valószínűleg meg kell majd allni a sorral agv hiba miatt. April 5, 2025 at 9:21 AM, 배일명 : 음2 이재기 agv 정상동작이 어렵습니다. 한국출장자분께서도 초반에 대응 부탁드립니다 April 5, 2025 at 9:23 AM, 배병민 (Bae Byoungmin) : 음극 2라인 생산 진행이 금일 언제부터일까요? April 5, 2025 at 9:25 AM, 배일명 : 오전부터 생산 진행중이었습니다. 라인안전화되고 담당자분께서 agv 진행요청해서 현재 agv사용중입니다. 초반에 이재기,agv 작동이 불안해서 초반에 같이 봐주셨으면 합니다 April 5, 2025 at 9:25 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 현장에서 현상 확인 부탁드립니다. April 5, 2025 at 9:26 AM, Baek Hojong(백호종)FA : 지금 갑니다 조장님 April 5, 2025 at 9:26 AM, 배병민 (Bae Byoungmin) : 네 저도 현장으로 가보겠습니다. 감사합니다 April 5, 2025 at 9:49 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0STK033_C01 there is Load Collapse error and it is blocking several transfers. Thank you very much! April 5, 2025 at 9:52 AM, Szabadi Miki : Checking April 5, 2025 at 9:52 AM, Mohammad Amir : Thank you very much! April 5, 2025 at 9:52 AM, Yena Valerii : hello. please come to anode press 1, problem with automatic material feed on U\W April 5, 2025 at 9:59 AM, Szabadi Miki : Very welcome April 5, 2025 at 10:00 AM, Hári Zoltàn : Gyertek legyszi és vigyétek el innen az agv-ket! Jelenleg 3 van útban úgy, hogy nem használjuk őket! Köszi! April 5, 2025 at 10:07 AM, Szabadi Miki : Egy pillanat és megyünk April 5, 2025 at 10:07 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 안녕하세요. 금일 음극코터2라인 AGV로 생산 시작하는데 PNT - SK CC 이재기 설비간 ID TRANSFER에 문제가 있어서 확인이 필요합니다. 주말간 음극코터2라인은 수동생산하고, 차주 월요일 PNT - SKCC 제어에서 같이 확인하고 AGV 사용하고자 합니다. April 5, 2025 at 10:38 AM, Mohammad Amir : @FA @Szabadi Miki Please check LTA1738,LTA1036 located at E0CNVA51_20,19 consequently. These carriers do not have jobs to go to the STK. So these carriers are not moving and blocking all other carriers on the CNVA51. Thank you very much! April 5, 2025 at 10:40 AM, Szabadi Miki : Chcking April 5, 2025 at 10:40 AM, Hári Zoltàn : Do you mean anode2? April 5, 2025 at 10:45 AM, Szabadi Miki : Solved, all tray moving April 5, 2025 at 10:45 AM, Mohammad Amir : Thank you very much! April 5, 2025 at 10:50 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0CNVC12_2102,2101 there is Data Loss Error. Thank you! April 5, 2025 at 10:56 AM, Szabadi Miki : Checking April 5, 2025 at 12:50 PM, Hári Zoltàn : Foliaraktarhoz szeretnek kerni technikust! Koszonom! April 5, 2025 at 12:50 PM, Szabadi Miki : Megyünk April 5, 2025 at 12:51 PM, Hári Zoltàn : Koszi! April 5, 2025 at 1:02 PM, Kiss Balázs F.A. : Kész! April 5, 2025 at 2:39 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA34_C01 there is MCP control power CP trip error. Thank you very much! April 5, 2025 at 3:08 PM, Hári Zoltàn : Anod roll raktarhoz gyertek legyszi! Osszevesztek az agv-k! Koszi April 5, 2025 at 3:08 PM, Kiss Balázs F.A. : Megyek! April 5, 2025 at 3:33 PM, Majláth Martin : Sziasztok! Catod roll raktárba szeretnék segítséget kérni 5. Raktár nem működik Köszi April 5, 2025 at 3:34 PM, Kiss Balázs F.A. : Már kész! April 5, 2025 at 4:40 PM, Yena Valerii : near the 2nd press anode a plug of robots has formed, please check April 5, 2025 at 4:55 PM, Szabadi Miki : Done April 5, 2025 at 6:42 PM, Yanina : Sziasztok, Cathode slitt 3 nincs AGV 40p April 5, 2025 at 6:42 PM, Skwarek Tibor : Nézzük April 5, 2025 at 7:10 PM, Skwarek Tibor : Nincs elérhető anyag April 5, 2025 at 7:10 PM, Simon Attila F. A. : This message was deleted. April 5, 2025 at 7:10 PM, Simon Attila F. A. : This message was deleted. April 5, 2025 at 8:14 PM, 김진호B_PM_시너스텍 left this chatroom. April 5, 2025 at 11:39 PM, Koska Szilárd János : Sziasztok gyertek létszives Anód roll raktár hoz April 5, 2025 at 11:43 PM, Simon Attila F. A. : Itt vagyok. April 6, 2025 at 12:24 AM April 6, 2025 at 12:24 AM, Oláh Rajmund : Gyertek legyszives cathode roll raktárhoz ki állt hibara a raktár Koszonom April 6, 2025 at 12:25 AM, Oláh Rajmund : Meg oldódott April 6, 2025 at 1:09 AM, Koska Szilárd János : Gyertek létszives katód press2 re leszedő robot megált a R/W nél April 6, 2025 at 1:09 AM, Marsi Gábor : Ok April 6, 2025 at 1:43 AM, Oláh Rajmund : Gyertek legyszives cathode slitt 2 re pusher problema April 6, 2025 at 1:44 AM, Skwarek Tibor : Megyünk April 6, 2025 at 1:53 AM, Oláh Rajmund : Gyertek legyszi megint April 6, 2025 at 2:36 AM, Koska Szilárd János : Gyertek létszi Anód press3 hoz leszedő robot megált R/W nél köszi April 6, 2025 at 2:41 AM, Simon Attila F. A. : Kész is. April 6, 2025 at 6:02 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Szabadi Miklós Kiss Balázs Oláh Andris ———————————— Assembly(5): Nagy Zsolt Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor April 6, 2025 at 6:48 AM, Hári Zoltàn : Sziasztok! Gyertek légyszi a fóliaraktárhoz! Köszönöm! April 6, 2025 at 6:48 AM, Mr.Miti (미티) FA : @이철훈_CIM_SKCC Unable to reach electrode ACS. Can you help? April 6, 2025 at 6:49 AM, Szabadi Miki : Egy pillanat itt vagyok anod roll raktárban April 6, 2025 at 7:17 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 06 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 6, 2025 at 7:26 AM, 이철훈_CIM_SKCC : I will checking April 6, 2025 at 7:27 AM, Mr.Miti (미티) FA : Now work again April 6, 2025 at 7:30 AM, KIM SEYEON [김세연]_FA : thanks April 6, 2025 at 8:13 AM, Nagy Dávid 4 : Anod press 4 R/W az agv kiált hibára help help köszönöm szépen April 6, 2025 at 8:13 AM, Szabadi Miki : Megyünk April 6, 2025 at 8:13 AM, Oláh András : Megyünk April 6, 2025 at 8:59 AM, Nagy Dávid 4 : Anod press 3 robot megàllt help help köszönöm szépen April 6, 2025 at 9:32 AM, Nagy Dávid 4 : Anod press 3 23 számú agv pozíció probléma help help köszönöm szépen R/W April 6, 2025 at 9:33 AM, Nagy Dávid 4 : Megoldodott köszönöm szépen April 6, 2025 at 9:44 AM, Szabadi Miki : 👌 April 6, 2025 at 9:52 AM, 백한용 left this chatroom. April 6, 2025 at 10:20 AM, Yena Valerii : please come to anode press 4, same problem as 10 minutes ago April 6, 2025 at 10:24 AM, Szabadi Miki : Checking April 6, 2025 at 10:34 AM, Csicskovics Balázs : Gyertek légyszives Katód press 2 megállt a robot. Köszönöm April 6, 2025 at 10:42 AM, Szabadi Miki : Megyünk April 6, 2025 at 11:57 AM, Nagy Dávid 4 : Anod press 3 6 számú agv kiált hibára help help köszönöm szépen U/W April 6, 2025 at 11:57 AM, Szabadi Miki : Megyünk April 6, 2025 at 12:28 PM, Nagy Dávid 4 : Anod 5,7 agv kiált hibára help help köszönöm szépen April 6, 2025 at 12:28 PM, Szabadi Miki : Rendben poron vagyunk amint tudunk menni lesz help 🙂 April 6, 2025 at 12:28 PM, Kiss Balázs F.A. : Majd megyek April 6, 2025 at 5:22 PM, Yena Valerii : Hello.please come to the anode press 2, a plug of AGV robots has formed April 6, 2025 at 5:24 PM, Mr.Miti (미티) FA : Solved April 6, 2025 at 8:23 PM, Oláh Rajmund invited na1tis. April 7, 2025 at 2:08 AM April 7, 2025 at 2:08 AM, K.Krisz Coating : Hali! Kérek valakit katod 4 u/w folia emelőt kellene alap pozicioba teni. Köszönöm April 7, 2025 at 6:10 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10+2/12(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin, Rácz Dániel --------------- Electrode(4): Kiss Balázs, Szabadi Miklós, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A techn April 7, 2025 at 6:48 AM, Shakir (MCS) : @FA Please check Port E0STKC34_P01 is OOS, Auto Step 01 Time over. One job to press1 is getting delayed. Thank you April 7, 2025 at 6:50 AM, Szabadi Miki : Checking April 7, 2025 at 7:01 AM, Shakir (MCS) : Issue has been resolved ✅ AGV#21 on the way Thank you April 7, 2025 at 7:01 AM, Szabadi Miki : You are welcome! April 7, 2025 at 7:08 AM, Nagy Dávid 4 : Anod slitt2 robot problema help help köszönöm szépen April 7, 2025 at 7:10 AM, Szabadi Miki : Megyünk megyünk April 7, 2025 at 7:45 AM, Nagy Dávid 4 : Anod press 2-es gép mögött a 24 számú agv kiált hibára help help köszönöm szépen April 7, 2025 at 7:45 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 07 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 7, 2025 at 7:46 AM, Pálosi Róbert : Megyünk April 7, 2025 at 8:41 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 지난주 토요일 코터음극 2호기에서 PNT 장비와 이재기간 ID 인터페이스 문제가 있었습니다. 금일 오전10시에 PNT 제어인원 현장 지원가능할까요? 같이 확인하고 싶습니다. April 7, 2025 at 8:56 AM, Anton Mashchenko : Hello, come to cathode press 1, AGV 5 position error! Location U/W! Thanks! April 7, 2025 at 9:03 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 금일 PNT와 SK C&C와 ID 인터페이스 확인 부탁드립니다. 서지원피엠님이 pnt 인원 지원해주시기료 했습니다. April 7, 2025 at 9:05 AM, Baek Hojong(백호종)FA : 네 알겠습니다 피엠님 April 7, 2025 at 11:16 AM, 서지원 : 음극 코팅2라인 Agv 호출 후 10분이 지났는데 1st,2nd R/W 모두 아무것도 오지 않고있습니다. 빠르게 확인 부탁드립니다. April 7, 2025 at 11:20 AM, Shakir (MCS) : There is Job exists for E1CTA020_P02 Thank you April 7, 2025 at 11:24 AM, Shakir (MCS) : @ACS Please check agv not assigning, from MCS reply is Okay. Thank you April 7, 2025 at 11:49 AM, Shakir (MCS) : @FA Please check E0STKC33, travel lag error.Job is getting delayed. Thank you April 7, 2025 at 11:59 AM, Boromisza Zoltán : This message was deleted. April 7, 2025 at 12:00 PM, Denkó Jani (F.A.) : Nem nekünk szól April 7, 2025 at 12:08 PM, Szabadi Miki : Checking April 7, 2025 at 12:13 PM, Szabadi Miki : Now it is working , roll is on its way April 7, 2025 at 12:14 PM, Shakir (MCS) : Thank you April 7, 2025 at 12:15 PM, Szabadi Miki : You are welcome April 7, 2025 at 2:57 PM, Nagy Dávid 4 : Anod slitt 2 nincsen tálca rá tudnátok nézni help help köszönöm szépen April 7, 2025 at 3:02 PM, Anton Mashchenko : Hello, come to cathode press 2, AGV 9 error! Thanks! April 7, 2025 at 3:03 PM, Szabadi Miki : Checking April 7, 2025 at 3:46 PM, Nagy Dávid 4 : Anod press 3 U/W agv kiált hibára help help köszönöm szépen April 7, 2025 at 3:53 PM, Czeilinger Krisztián : This message was deleted. April 7, 2025 at 3:53 PM, Czeilinger Krisztián : Kész April 7, 2025 at 4:24 PM, Nagy Dávid 4 : Anod slitt2 nincs TRAY ID help help köszönöm szépen April 7, 2025 at 4:53 PM, Czeilinger Krisztián : Going April 7, 2025 at 5:23 PM, Szabadi Miki : Kész van tray id megy April 7, 2025 at 6:12 PM, Yena Valerii : Hello. come to the press anode 3 the robot that takes the finished material to R/W is stuck April 7, 2025 at 6:18 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 3 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 7, 2025 at 6:30 PM, Szeitz Flórián : Sziasztok! Erre tudtok jönni? Köszönöm April 7, 2025 at 6:31 PM, Mr.Miti (미티) FA : Megyünk April 7, 2025 at 7:34 PM, Powder tréner : Sziasztok,szeretnék kérni segítséget,a katod raktár folyamatosan kiáll hibára és nem adja ki az anyagot. April 7, 2025 at 8:06 PM, adambenczik : Rajta vagyunk April 7, 2025 at 8:09 PM, gutenkunstabelzoltan : Kész April 7, 2025 at 9:16 PM, Oleksii Krasnoshchok : Hello. come to the press anode 3 the robot that takes the finished material to R/W is stuck April 7, 2025 at 9:20 PM, adambenczik : Solved April 7, 2025 at 10:21 PM, Yena Valerii : come to the anode press 2, a plug of AGV robots has formed. thanks April 7, 2025 at 10:28 PM, adambenczik : Solved April 7, 2025 at 10:30 PM, Powder tréner : S.O.S Katód air showerben elakadt az AGV. Szeretnék segítséget kérni. April 7, 2025 at 10:31 PM, adambenczik : Megyünk April 8, 2025 at 1:11 AM April 8, 2025 at 1:11 AM, VK (mcs) : @FA Please check Cathode roll STK C33 Travel exact position error April 8, 2025 at 1:18 AM, Oleksii Krasnoshchok : Hello in anode press 3 problem with Agv u/w April 8, 2025 at 2:18 AM, VK (mcs) : @FA Please check Foil STK E0STK001 SCP main power CP trip. Also please check Cathode roll STK C35 AGV retry count exceeded. April 8, 2025 at 2:26 AM, 방혁 PM(Bang.Hyuk) FA : I informed to technicians They will check Thank you! April 8, 2025 at 2:26 AM, VK (mcs) : Thank you April 8, 2025 at 2:27 AM, Mr.Miti (미티) FA invited Édl Tamás. April 8, 2025 at 2:28 AM, 방혁 PM(Bang.Hyuk) FA : Solved April 8, 2025 at 3:16 AM, Oleksii Krasnoshchok : Same problem April 8, 2025 at 3:53 AM, Szeitz Flórián : Sziasztok! Anód roll raktár 1 stoker kiállt hibára. Légyszives nézzétek meg. Köszönöm April 8, 2025 at 3:54 AM, Mr.Miti (미티) FA : Nézem April 8, 2025 at 6:02 AM, Anton Mashchenko : Hello, come to cathode press 2, AGV 13 position error! Thanks! April 8, 2025 at 6:03 AM, Szücs Géza FT-B : This message was deleted. April 8, 2025 at 6:06 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10/12(+1) Tech, 1Sl Overtime(0): Holiday(1+1): Kovács Ágnes, (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 8, 2025 at 6:08 AM, Nagy Dávid 4 : Anod press 3 U/W 6 számú agv kiált hibára és R/W is robot probléma help help köszönöm szépen April 8, 2025 at 6:17 AM, Czeilinger Krisztián : Kész. April 8, 2025 at 6:28 AM, Nagy Dávid 4 : Katod press 2-es gép mögött a 13 számú agv kiált hibára help help köszönöm szépen April 8, 2025 at 6:29 AM, Nagy Dávid 4 : Megoldottam köszi April 8, 2025 at 8:14 AM, 배병민 (Bae Byoungmin) : @김건희 PM님 안녕하세요 금일, 명일 Reel 창고 C/V 예방 점검 진행 계획입니다. (메일 사전 공유) 하기 일정으로 진행해도 되는 부분인지 확인 부탁드립니다. 4/8 양극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 4/9 음극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 April 8, 2025 at 8:16 AM, 김건희 : 금일 양극 전극 재고가 빠듯하여 하루 씩 미룰 수 있으실까요 April 8, 2025 at 8:22 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 하기 일정으로 변경하여 진행 하겠습니다. 감사합니다. 4/9 양극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 4/10 음극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 April 8, 2025 at 8:52 AM, 김건희 : 넵 감사합니다 April 8, 2025 at 9:20 AM, Szappanos Gábor : Anód 1 es raktár kiállt hibába. Légyszíves nézzetek rá, köszi April 8, 2025 at 9:20 AM, Szappanos Gábor : Jumbo April 8, 2025 at 9:21 AM, Czeilinger Krisztián : Megyünk. April 8, 2025 at 10:42 AM, Viktoriia Hleba : 2 slitter anode r/w conveer stop. Köszönöm April 8, 2025 at 10:43 AM, Csanálosi Gábor FA : @Pálosi Róbert @Czeilinger Krisztián April 8, 2025 at 11:10 AM, Csanálosi Gábor FA : Solved April 8, 2025 at 11:32 AM, Nagy Dávid 4 : Katod slitt 1 agv kiált hibára help help köszönöm szépen April 8, 2025 at 11:35 AM, Pálosi Róbert : Megyek April 8, 2025 at 12:30 PM, Nagy Dávid 4 : Anod slitt 3-ra nem jön az anyag rá tudnátok nézni help help köszönöm szépen April 8, 2025 at 12:32 PM, Böröcz Tamás : Megy April 8, 2025 at 12:33 PM, Böröcz Tamás : @Pálosi Róbert @Czeilinger Krisztián a raktár transzfer manualba van April 8, 2025 at 12:33 PM, Böröcz Tamás : De menne April 8, 2025 at 12:37 PM, Szücs Géza FT-B : STKA32 - Anód Jumbo Roll 2es April 8, 2025 at 12:37 PM, Shakir (MCS) : @FA Please check the port E0STKA32_P01 is OOS having carrier for slitt 3 is getting delayed Thank you April 8, 2025 at 12:49 PM, Böröcz Tamás : Thanks Mr Obvious April 8, 2025 at 12:50 PM, Böröcz Tamás : It's working now April 8, 2025 at 12:51 PM, Shakir (MCS) : AGV#05 on the way for slitt3 Thank you April 8, 2025 at 1:19 PM, Szappanos Gábor : Hali. Katód roll 1 es raktár kiállt hibára. Legyetek szívessek megnézni. Köszi April 8, 2025 at 1:29 PM, Nagy Dávid 4 : Anod slit 3 nincs AGV 15 perc help help köszönöm szépen April 8, 2025 at 1:29 PM, Czeilinger Krisztián : Hamarosan megyünk. April 8, 2025 at 1:37 PM, Shakir (MCS) : RBA2172 carrier job exist for slitt3 but there is some issue with AGV01. Multiple time trying to UNload carrier but failed. @FA Thank you April 8, 2025 at 1:48 PM, Nagy Dávid 4 : Anod slitt 3 40perce nincsen agv help help köszönöm szépen April 8, 2025 at 2:14 PM, Shakir (MCS) : Could you please check AGV01 which is idle at P01, STK32, job exist for slitt3. Getting delayed Thank you April 8, 2025 at 2:16 PM, na1tis : Hello, Cathode Pres 2, AGV not coming 26min! Help, thanks you April 8, 2025 at 2:16 PM, Csanálosi Gábor FA : @Pálosi Róbert April 8, 2025 at 2:19 PM, Shakir (MCS) : @Pálosi Róbert @FA Please check E0STKC35_P01 is OOS, there is a job for press2 which is getting delayed. Thank you April 8, 2025 at 2:21 PM, Shakir (MCS) : Job exist for Press2 CA, from STKC35 but output is OOS causing material supply delayed. I already informed FA, they will fixed as soon as material will reach to press2. Thank you April 8, 2025 at 2:47 PM, Anton Mashchenko : Hello, cathode press 3, AGV not coming 10 min! Help! April 8, 2025 at 2:50 PM, Shakir (MCS) : Hello LR received at 14:38, Materials currently not available, as soon as material will be available jobs will be created. Thank you April 8, 2025 at 2:53 PM, Shakir (MCS) : Next Lot available : Press line 3 AN:34 CA: 00 Thank you April 8, 2025 at 3:08 PM, Shakir (MCS) : @Csanálosi Gábor FA There is any maintenance going on in STKC35, Port P01 is OOS causing delayed for press2 material supply. Already informed FA. Thank you April 8, 2025 at 3:14 PM, Shakir (MCS) : AGV19 on the way for slitt3 Thank you April 8, 2025 at 3:16 PM, Csanálosi Gábor FA : @Böröcz Tamás ? April 8, 2025 at 3:17 PM, 김대호 (Kim Dae Ho) : Cathode press 3 The materials that are still available Is there none? @Shakir (MCS) April 8, 2025 at 3:18 PM, Shakir (MCS) : Yes Still same situation No material available Thank you April 8, 2025 at 3:21 PM, Böröcz Tamás : Már ment mire ide értem April 8, 2025 at 3:23 PM, Böröcz Tamás : Port is available but there is no job for Press2 in ACS April 8, 2025 at 3:26 PM, 김대호 (Kim Dae Ho) : Cathode press 3 Please check it one more time @Shakir (MCS) April 8, 2025 at 3:26 PM, Shakir (MCS) : Please press LR for Press2 Thank you April 8, 2025 at 3:27 PM, Shakir (MCS) : Job has been initiated for press3 Thank you April 8, 2025 at 3:28 PM, Erik Gerzsenyi : Sziasztok Anod press 2 es 5 kozott elakadt az agv April 8, 2025 at 3:29 PM, 김대호 (Kim Dae Ho) : Thank you April 8, 2025 at 3:30 PM, Shakir (MCS) : You’re welcome April 8, 2025 at 3:38 PM, Shakir (MCS) : AGV#19 on the way for press3 ✅ @FA @Böröcz Tamás Check AGV05 alarm blocking AGV19 Thank you April 8, 2025 at 3:44 PM, Nagy Dávid 4 : Katod slitt 3 nincsen agv help help köszönöm szépen April 8, 2025 at 3:50 PM, Szappanos Gábor : Hali. Katód fóliaraktár hibásodás. Szeretnék hozzá segítséget kérni. Köszi April 8, 2025 at 3:55 PM, 유병일 : @Shakir (MCS) Hello, please put the unkroll held by agv #2 into an roll warehouse #3 April 8, 2025 at 3:56 PM, Böröcz Tamás : Nem is lesz ha nem hagyod hogy megcsinálja az ember. Nehezíti a körülményeket, hogy elkezded nyomkodni úgy hogy távolról próbálom vezérelni... Ahogy az is hogy 100 méterre van a kiosk, ott van hagyva előtte a jumbo, alapból az assyról kell átjöjjek. A panaszod a telepítő cég felé tudod benyújtani. Ahogy mi is egy éve próbáljuk. Szívesen szépen. Amúgy 2 percen belül ott voltam, ha nem akkor jeleztek amikor már dugó van akkor könnyebb megoldani. April 8, 2025 at 3:56 PM, 유병일 : anode agv #2 April 8, 2025 at 3:57 PM, Böröcz Tamás : Elhiszem hogy sokat számít a termelési bónusz, de sajnos nem érzem April 8, 2025 at 3:57 PM, Böröcz Tamás : De szólhattok az érdekünkben April 8, 2025 at 3:57 PM, Böröcz Tamás : Sajnos akkor sem lesz jobb April 8, 2025 at 4:06 PM, 유병일 : @Shakir (MCS) agv is not moving. April 8, 2025 at 4:07 PM, Shakir (MCS) : We are checking that on agv there is no carrier in ACS. April 8, 2025 at 4:09 PM, Shakir (MCS) : @FA please check the AGV02 have UNK carrier then send back to STK AN Thank you April 8, 2025 at 4:13 PM, 유병일 : unk roll don't have a carrier ID because we took it out manually from the coater. we are going to put it in the warehouse and put the carrier ID in the manual port, so please send the unk roll in the warehouse. April 8, 2025 at 4:18 PM, Shakir (MCS) : We created a job to E0STKA33. Thank you April 8, 2025 at 4:23 PM, Shakir (MCS) : Job has been successfully completed now. It stocked at E0STK033(0100704). Issue has been resolved. Thank you April 8, 2025 at 4:25 PM, 유병일 : thank you! April 8, 2025 at 4:25 PM, Shakir (MCS) : You’re welcome April 8, 2025 at 4:36 PM, 김대호 (Kim Dae Ho) : Anode press 3 R/W Left grip Backward Time over Alarm @Fa April 8, 2025 at 4:38 PM, Nagy Dávid 4 : Anod press 3 U/W robot megàllt help help köszönöm szépen April 8, 2025 at 4:53 PM, Nagy Dávid 4 : R/W elirtam bocsi April 8, 2025 at 5:41 PM, Baek Hojong(백호종)FA invited FACS_오창훈_CHANGHOON and FACS_Wooseok Choi. April 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 8, 2025 at 6:41 PM, (Unknown) : Sziasztok.Katód press1 eldudnátok álni az AGV-vel mert udba vannak.köszönöm April 8, 2025 at 6:47 PM, adambenczik : Elküldtem őket April 8, 2025 at 7:29 PM, Powder tréner : Sziasztok,poron Katód oldalon E1PLC031_P02 port mellett elakadt az AGV . April 8, 2025 at 8:08 PM, gutenkunstabelzoltan : Kesz April 8, 2025 at 9:13 PM, Powder tréner : Poron Katód oldalon E1PLC031_P02 portra nem tudunk anyagot rendelni. April 8, 2025 at 10:13 PM, cehmannzsoltcehmann : @VK (mcs) E1PLC031_P02 check please the port, remove the order April 8, 2025 at 10:15 PM, VK (mcs) : There is no order April 8, 2025 at 10:17 PM, cehmannzsoltcehmann : The port says acs cancel, they can't request material for it April 8, 2025 at 10:19 PM, VK (mcs) : As I see, there are several UR for UNK material ID and all of them were canceled by rail April 8, 2025 at 10:21 PM, VK (mcs) : Did you request load? April 8, 2025 at 10:23 PM, VK (mcs) : Please try again LR April 8, 2025 at 10:24 PM, cehmannzsoltcehmann : you can't make a request because the port thinks there's something there, but the port is empt April 8, 2025 at 10:26 PM, VK (mcs) : Changed request status, material assigned and it's on the way. April 8, 2025 at 11:10 PM, Powder tréner : KATOD oldalon megált az AGV és nem teszi le a raklapot portra. April 8, 2025 at 11:25 PM, Kurgya Attila : Sziasztok. Segítséget kérek fólia raktárhoz, a daruhoz. Köszönöm April 8, 2025 at 11:43 PM, adambenczik : Kész April 8, 2025 at 11:53 PM, Kurgya Attila : Köszi April 9, 2025 at 12:24 AM April 9, 2025 at 12:24 AM, Balogh Ádám : Sziasztok SOS kellene ide valaki mert igy nem tudunk tölteni April 9, 2025 at 12:24 AM, Mr.Miti (미티) FA : Úton April 9, 2025 at 12:57 AM, Oleksii Krasnoshchok : Hello in anode press 3 r/w problem with Agv April 9, 2025 at 1:30 AM, Powder tréner : Katód air showerben elakadt az AGV. Szeretnék segítséget kérni. April 9, 2025 at 1:33 AM, Mr.Miti (미티) FA : Termelésben az agv. April 9, 2025 at 1:33 AM, Powder tréner : (best) April 9, 2025 at 4:15 AM, Powder tréner : Megint Katód air showerben elakadt az AGV. Szeretnék segítséget kérni. April 9, 2025 at 6:18 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13 Overtime (0):- Sick (2):Nagy Zsolt, Kasztel Balázs Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(3): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 9, 2025 at 6:31 AM, Nagy Dávid 4 : Anod press 2 mögött a 24-es számú agv kiált hibára help help köszönöm szépen April 9, 2025 at 6:32 AM, Szabadi Miki : Megyünk April 9, 2025 at 6:38 AM, Hári Zoltàn : Sziasztok! Anod2 es katod2 coateren legyszi kapcsoljatok le az agv-ket mert nem tudjuk hasznalni oket! Koszi! April 9, 2025 at 6:39 AM, Szabadi Miki : Megyek April 9, 2025 at 6:43 AM, Dániel Hufnágel : Jó reggelt! Mai napon egész nap manuálisan szeretnétek dolgozni? April 9, 2025 at 6:45 AM, Nagy Dávid 4 : Anod slitt 3 TRAY ID hiányzik help help köszönöm szépen April 9, 2025 at 6:45 AM, Szabadi Miki : Ott egyiken sem működőképes az agv, anod 2,12,16, katod 2,3,4 lekapcsolva April 9, 2025 at 6:45 AM, Hári Zoltàn : Nem szeretnénk, mi lennénk a legboldogabbak, ha tudnánk használni. De nem műkődnek megfelelően. April 9, 2025 at 6:45 AM, Szabadi Miki : Megyünk April 9, 2025 at 8:22 AM, Nagy Dávid 4 : Anod press 2 mögött az agv kiált hibára help help köszönöm szépen April 9, 2025 at 8:28 AM, Szabadi Miki : Megyek April 9, 2025 at 8:32 AM, Mohammad Amir : @FA @Szabadi Miki Please check one job is Alternated cause E1CTA020_P01 is OOS. Thank you! April 9, 2025 at 8:34 AM, Szabadi Miki : Checking April 9, 2025 at 8:38 AM, Szabadi Miki : Could you please delete the job? That port is being used manually today. April 9, 2025 at 8:38 AM, Mohammad Amir : Okay,Sure! Thank you very much for the information! April 9, 2025 at 8:39 AM, Szabadi Miki : You are welcome April 9, 2025 at 8:53 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! April 9, 2025 at 8:54 AM, Szabadi Miki : thank you for your help! April 9, 2025 at 8:54 AM, Mohammad Amir : You are welcome! April 9, 2025 at 8:57 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0STKC12_C01 there is Ready Off During Forking error. Thank you very much! April 9, 2025 at 8:57 AM, Szabadi Miki : Okay checking April 9, 2025 at 9:12 AM, 배병민 (Bae Byoungmin) : 금일 Reel 창고 C/V 예방 점검 진행 계획입니다. 작업 전/후로 공지드리겠습니다. 4/8 양극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 Today, we plan to conduct a C/V preventive inspection of the Reel Warehouse. We will notify you before/after the work. 4/8 Anode Reel Warehouse ㄴ 9:30 ~ 12:00 Non-operation April 9, 2025 at 9:15 AM, Mohammad Amir : @FA @Szabadi Miki Please check this error exists since 8:47. Thank you very much! April 9, 2025 at 9:17 AM, Szabadi Miki : colleagues are on site, they are just busy with other things April 9, 2025 at 9:17 AM, Mohammad Amir : Köszönom szepen . April 9, 2025 at 9:18 AM, Szabadi Miki : You are welcome April 9, 2025 at 9:32 AM, Szarka Adrián : @Szabadi Miki kezdeném a felmosas April 9, 2025 at 9:33 AM, Szabadi Miki : Oké hol vagy megbeszéljük részleteket April 9, 2025 at 9:57 AM, Yena Valerii : Hello, please come to the anode press 3 the robot that takes the material has frozen in the same position with the material April 9, 2025 at 9:58 AM, Szabadi Miki : Coming April 9, 2025 at 10:35 AM, KIM SEYEON [김세연]_FA : @김건희 피엠님 금일 오후 2시 디버터 벨트 교체 및 모터 베이스 레벨 조정 지그, 커버제거 관련 현장 확인을 진행하려고 합니다. 벨트 교체를 슬리터 음극 6라인 2단 컨베어 디버터에서 진행할 예정이고 생산에 영향 없이 진행 하겠습니다. April 9, 2025 at 10:40 AM, 김건희 : 넵 알겠습니다 April 9, 2025 at 10:54 AM, Csicskovics Balázs : Anode slitt 2 re nem jön az AGV. Nézzetek rá légyszíves April 9, 2025 at 10:56 AM, Mohammad Amir : Please press Load Request we didn't received LR in recent times. Thank you! April 9, 2025 at 10:57 AM, Oláh András : @Mohammad Amir anode slitt 1 is the problem April 9, 2025 at 10:59 AM, Mohammad Amir : For Anode Slitter -1, We received LR successfully but currently we don't have any materials that's why jobs are not getting created. As soon as materials will be arrive,job will be created automatically. Thank you very much! April 9, 2025 at 11:39 AM, Szarka Adrián : @Szabadi Miki katod Slitt 4 gépnél van egy sérült kábel csatorna. Azt ktudjatok cserélni ? April 9, 2025 at 11:40 AM, Szabadi Miki : Mi nem nekünk nincs , esetleg termelési technikusok ? April 9, 2025 at 11:41 AM, Szarka Adrián : 2 raktárban tudtok kérni. April 9, 2025 at 12:30 PM, 배병민 (Bae Byoungmin) : 양극 Reel 창고 정상 생산 진행중입니다. The anode reel warehouse is now fully operational. April 9, 2025 at 12:32 PM, Csicskovics Balázs : Sziasztok Cathode reel raktár üzemel már? April 9, 2025 at 12:33 PM, Dániel Hufnágel : Elvileg igen April 9, 2025 at 12:33 PM, Dániel Hufnágel : Viszont eddig is sok munkája volt, most még ez a kicsi is feltorlódott biztosan lesznek még fenn akadások April 9, 2025 at 12:59 PM, FACS_오창훈_CHANGHOON invited FACS_JaewonShin. April 9, 2025 at 1:16 PM, 김대호 (Kim Dae Ho) : Is there no Anode sliter 1 L/R signal? @Mohammad Amir April 9, 2025 at 1:16 PM, Mohammad Amir : Checking April 9, 2025 at 1:17 PM, Mohammad Amir : For Anode Slitter -1, We received LR successfully at 9:18 but currently we don't have any materials that's why jobs are not getting created. As soon as materials will be arrive,job will be created automatically. Thank you very much! April 9, 2025 at 1:18 PM, 김대호 (Kim Dae Ho) : I see. I'll check it out too, and thank you for your reply 👍 April 9, 2025 at 1:19 PM, Mohammad Amir : You are welcome! April 9, 2025 at 2:27 PM, Nagy Dávid 4 : Anod slitt 1 agv várakozás 33perc rá tudnátok nézni help help köszönöm szépen April 9, 2025 at 2:27 PM, Szabadi Miki : Nincs oda anyag April 9, 2025 at 2:29 PM, Nagy Dávid 4 : Az meg hogy lehet 282000m van a raktárban ??????? April 9, 2025 at 2:30 PM, Szabadi Miki : Ha feljebb lapozol meglátod , én többet nem tudok April 9, 2025 at 2:58 PM, Mohammad Amir : @FA @Szabadi Miki Please check E0STK001_C01 there is MCP AP Error and it is blocking two transfers. Thank you very much! April 9, 2025 at 2:58 PM, Szabadi Miki : Checking April 9, 2025 at 3:21 PM, Yena Valerii : the same problem on rw as always anode press 3, please check April 9, 2025 at 3:41 PM, Hári Zoltàn : Technikust kernek a foliaraktarhoz! Megallt a daru! Koszi! April 9, 2025 at 3:41 PM, Kiss Balázs F.A. : Okés April 9, 2025 at 3:41 PM, Kiss Balázs F.A. : Megyünk April 9, 2025 at 3:41 PM, Mohammad Amir : @Szabadi Miki This error still exists, please check. Thank you very much! April 9, 2025 at 3:53 PM, Oláh András : We solved it. April 9, 2025 at 3:53 PM, Mohammad Amir : Thank you very much! April 9, 2025 at 3:55 PM, Oláh András : @Mohammad Amir can u send back material on agv21 to tge warehouse? Production will use new material from coating in manual April 9, 2025 at 3:55 PM, Mohammad Amir : Hello, I would like to help you. Please write me material id or AGV id. Thank you very much! April 9, 2025 at 3:56 PM, Mohammad Amir : Are you referring to RBC2427, please confirm? Thank you! April 9, 2025 at 3:57 PM, Oláh András : Oh sorry, E0JGVC01_VC21 April 9, 2025 at 3:57 PM, Oláh András : Yes RBC2427 April 9, 2025 at 3:58 PM, Mohammad Amir : Thank you very much for the confirmation. This carrier has already a job to E1PRC030_P01. Should I cancel this job? Needs confirmation. Thank you very much! April 9, 2025 at 3:59 PM, Oláh András : Yes cancel it please, than send back to the warehouse. Thank you April 9, 2025 at 4:00 PM, Mohammad Amir : Alright,on it. April 9, 2025 at 4:04 PM, Mohammad Amir : Issue has been resolved. ✅ I have given this vehicle to store the carrier in the warehouse #3. Monitoring the transfer. Thank you! April 9, 2025 at 4:05 PM, Oláh András : Appreciate you help 🙏 April 9, 2025 at 4:05 PM, Mohammad Amir : You are welcome! April 9, 2025 at 4:13 PM, Mohammad Amir : Carrier RBC2427 has been successfully stored in STKC31 at 16:13 as requested ✅. Thank you very much! April 9, 2025 at 4:14 PM, Oláh András : Thank you thank you 👍 April 9, 2025 at 4:14 PM, Mohammad Amir : You are welcome! April 9, 2025 at 5:53 PM, 김건희 : @KIM SEYEON [김세연]_FA PM님 음극 coating 2라인에 2번 AGV 좁은 공간에서 계속 도는데 test 중인건가요? April 9, 2025 at 5:53 PM, 배병민 (Bae Byoungmin) : 제가 저리 해드릴께요 April 9, 2025 at 7:39 PM, Koska Szilárd János : Sziasztok segítséget kérnék Anód press3 U/W hez agv kiált hibára April 9, 2025 at 7:41 PM, Simon Attila F. A. : Kész. April 9, 2025 at 7:44 PM, Simon Attila F. A. : @Koska Szilárd János nincs aktív kérés an press 4-re. @mcs please check avialable material for this machine. Thx April 9, 2025 at 7:48 PM, Koska Szilárd János : Kiállt ismét hibára April 9, 2025 at 7:49 PM, Shahbaz 샤바즈 MCS/RTD : Material available for press: An unit#3/4 59 April 9, 2025 at 7:50 PM, Simon Attila F. A. : Thank you! April 9, 2025 at 8:21 PM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD can you see any problem, why not arrive material to an perss 4? April 9, 2025 at 8:21 PM, Simon Attila F. A. : ...and to an press1... April 9, 2025 at 8:28 PM, Shahbaz 샤바즈 MCS/RTD : Job is there from stocker A31 but Stocker A31 P01 is OOS. Please check April 9, 2025 at 8:29 PM, Simon Attila F. A. : Ok. Thank you. April 9, 2025 at 8:30 PM, Simon Attila F. A. : Somebody switched off this port. April 9, 2025 at 8:31 PM, Simon Attila F. A. : I have no other information. I try switch on, and check the moving. April 9, 2025 at 8:35 PM, Shahbaz 샤바즈 MCS/RTD : It’s still OOS, please reset. Thank you April 9, 2025 at 8:36 PM, Simon Attila F. A. : "Sub Panel error Fan1" errormessage, it wasn't easy to clear the error, but it works now. April 9, 2025 at 8:37 PM, Simon Attila F. A. : I think working. April 9, 2025 at 8:37 PM, Simon Attila F. A. : (satisfied) April 9, 2025 at 8:38 PM, Shahbaz 샤바즈 MCS/RTD : Ok, now the port is in service and carrier is moving. April 9, 2025 at 8:40 PM, Simon Attila F. A. : The main problem was that several electrical cabinet doors in the anode warehouse were open (E0STKA31 and mian power), and we had no information about this. April 9, 2025 at 8:56 PM, Simon Attila F. A. : The reconnected crane is working properly. April 9, 2025 at 8:59 PM, Koska Szilárd János : Gyertek létszives Anód roll raktárba köszönöm April 9, 2025 at 8:59 PM, Skwarek Tibor : Kész April 9, 2025 at 9:28 PM, Simon Attila F. A. : This message was deleted. April 9, 2025 at 9:28 PM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD please check, why not arrive material to an slitter 2. April 9, 2025 at 9:30 PM, Simon Attila F. A. : I check the stka31 again... April 9, 2025 at 9:31 PM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. April 9, 2025 at 9:31 PM, Shahbaz 샤바즈 MCS/RTD : No lot search for An slitter unit 2. April 9, 2025 at 9:31 PM, Simon Attila F. A. : Thank you! April 9, 2025 at 9:38 PM, Simon Attila F. A. : The slitter trainer show me a list, on this be 131.578m material available. April 9, 2025 at 9:45 PM, Shahbaz 샤바즈 MCS/RTD : That may be different type of material, currently available lots -Unit 3 158 -Unit 1/2 is 0 (3 available rolls whose shelf are banned) April 9, 2025 at 9:45 PM, Simon Attila F. A. : Thank you so much. April 9, 2025 at 10:14 PM, K.Krisz Coating : Hali! An 2 AGV / 1 R/W üzembe veszük. Gyertek csekkolni. Kösze April 9, 2025 at 10:14 PM, Skwarek Tibor : Megyünk April 9, 2025 at 10:42 PM, Koska Szilárd János : Sziasztok kéne egykis segítség Anód roll raktár hoz April 9, 2025 at 10:42 PM, Skwarek Tibor : Megyünk April 9, 2025 at 11:36 PM, Oláh Rajmund : Gyertek legyszives anode press 4 R/W problema April 9, 2025 at 11:37 PM, Skwarek Tibor : Megyünk April 10, 2025 at 3:05 AM April 10, 2025 at 3:05 AM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD Can you help? There are not enough empty trays for the anode slitter machines. April 10, 2025 at 3:08 AM, Shahbaz 샤바즈 MCS/RTD : Available empty reel trays: Anode: 124 Cathode: 220 April 10, 2025 at 3:09 AM, Koska Szilárd János : Üdv kéne egy kis segítség Anód roll raktár hoz April 10, 2025 at 3:09 AM, Simon Attila F. A. : Okay, it's just getting here too slowly... April 10, 2025 at 3:09 AM, Simon Attila F. A. : Megyek. April 10, 2025 at 3:25 AM, K.Krisz Coating : Hali! Gyertek légyszi anod raktarhoz,letiltott a daru,rossz ajtó nyitás.🥴 Köszi April 10, 2025 at 3:25 AM, Skwarek Tibor : Megyünk April 10, 2025 at 4:24 AM, K.Krisz Coating : Anod 2 2 db agv egymást korlátoza,gyertek légyszives. Kösze April 10, 2025 at 4:24 AM, Simon Attila F. A. : Megyünk. April 10, 2025 at 6:19 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt, Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(4): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel, Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 10, 2025 at 6:24 AM, Yena Valerii : Hello. come to slitt 2 anode, problem with robot that picks up finished products. Thanks April 10, 2025 at 6:25 AM, Dániel Hufnágel : Just a moment please guys are at powder now April 10, 2025 at 6:29 AM, Csicskovics Balázs : Sziasztok Anode slitt 2 a robot nem viszi a kész reel-t. Gyertek légyszíves Köszönöm April 10, 2025 at 6:37 AM, Szabadi Miki : Poron voltunk mindjárt ott leszünk April 10, 2025 at 6:42 AM, Oláh András : @Csicskovics Balázs ide tudsz jönni anod slitt 2-höz? April 10, 2025 at 6:52 AM, Csicskovics Balázs : Megyek April 10, 2025 at 6:52 AM, Oláh András : Úgy néz ki megoldodik, de köszi 😁 April 10, 2025 at 6:56 AM, Yena Valerii : Hello. go to the quality room, you need to move the robot April 10, 2025 at 6:57 AM, Yena Valerii : AGV, Thanks April 10, 2025 at 6:57 AM, Oláh András : Comin April 10, 2025 at 7:38 AM, Hári Zoltàn : Jó reggelt! Érdeklődni szeretnék, hogy az anód 2 coateren mikortól használhatjuk az agv-ket? Az éjszakástól azt az infót kaptuk, hogy továbbra sem működik, majd nappalos műszakban megnézik. April 10, 2025 at 7:40 AM, Dániel Hufnágel : Jó reggelt! Egyenlőre más infóm nekem sincs, viszont ha azon múlik elinditsuk, és ha továbbra is reménytelen átállás lesz manuális kocsira ha az jó April 10, 2025 at 7:43 AM, Koncz Tamás : Szia, nem kaptam én sem infót hogy ne használjuk. Indítsuk el őket, nappalban úgy is itt van a Támogató csapat, tudnak reagálni talán. April 10, 2025 at 7:48 AM, duzzaman Md (MCS) : @ FA Please investigate E0STKA34_M01. A "Data off sensor overtime error" has persisted since 4:36 AM. Thank you. April 10, 2025 at 7:49 AM, Hári Zoltàn : Hát jó, akkor anód 2- 1-es RW-t megpróbáljuk. April 10, 2025 at 7:50 AM, Dániel Hufnágel : Oké jó April 10, 2025 at 7:51 AM, Dániel Hufnágel : Viszont amint torlódást okoz, vagy bármi csúszást nálatok a hibák száma miatt írj ide is légyszi, és akkomegy majd a manuális megoldás April 10, 2025 at 8:52 AM, 배병민 (Bae Byoungmin) : 금일 Reel 창고 C/V 예방 점검 진행 계획입니다. 작업 전/후로 공지드리겠습니다. 4/10 음극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 Today, we plan to conduct a C/V preventive inspection of the Reel Warehouse. We will notify you before/after the work. 4/10 Cathode Reel Warehouse ㄴ 9:30 ~ 12:00 Non-operation April 10, 2025 at 8:56 AM, duzzaman Md (MCS) : @FA Error persists. Please check. ⚠️ April 10, 2025 at 8:58 AM, Turianytsia Olesia : Nincs AGV 30 perc slitt cathode 2 April 10, 2025 at 8:58 AM, Mohammad Amir : Checking April 10, 2025 at 9:02 AM, Mohammad Amir : Issue has been resolved ✅ E0STKC35_C01 Crane was in inactive state that's why you witnessed delay. Now you will receive the materials soon. We are monitoring! Thank you very much! April 10, 2025 at 9:09 AM, Mohammad Amir : AGV#13 on the way with materials. ✅ Thank you! April 10, 2025 at 9:16 AM, 조혜근 : @FA Please come to the UW of the cathode press unit 4, I need to start the 4M TEST, but AGV brought the good roll. April 10, 2025 at 9:18 AM, Szabadi Miki : I am on my way April 10, 2025 at 9:18 AM, Turianytsia Olesia : Thanks a lot April 10, 2025 at 9:18 AM, Mohammad Amir : You are welcome! April 10, 2025 at 9:24 AM, Szabadi Miki : @Mohammad Amir Could you please send the RBC2535 roll, E0JGVC01_VC09 agv back to the warehouse? The production does not need this material, thank you very much. April 10, 2025 at 9:25 AM, Mohammad Amir : Working on it April 10, 2025 at 9:31 AM, Mohammad Amir : We have created the command to send it to its source warehouse ✅. We are monitoring the transfer. Thank you! April 10, 2025 at 9:31 AM, Szabadi Miki : Thank you for your help! April 10, 2025 at 9:31 AM, Mohammad Amir : You are welcome! April 10, 2025 at 9:40 AM, duzzaman Md (MCS) : @FA Please check E0STKA52 B01 & B02 There is 'Track sensor detection abnormalities' since 09:23 Thank you April 10, 2025 at 9:42 AM, FACS_오창훈_CHANGHOON : 음극동 릴 스태커 C/V 예방점검 작업 시작합니다 April 10, 2025 at 9:42 AM, duzzaman Md (MCS) : Could you also please check E0CNVC54_08_201 for a 'DATA LOSS ERROR' that has been present since 09:12? It appears to be preventing reels from functioning. April 10, 2025 at 9:47 AM, duzzaman Md (MCS) : Could you please also assist with this issue? It has been a little over an hour, and the error persists. April 10, 2025 at 9:49 AM, 조혜근 : Please give me another UW of cathode press unit 4 April 10, 2025 at 9:49 AM, 조혜근 : I need to send the rolls brought by AGV to the warehouse April 10, 2025 at 9:50 AM, Szabadi Miki : Please be patient, I'm on coating. April 10, 2025 at 9:51 AM, 조혜근 : Okay April 10, 2025 at 9:58 AM, Szabadi Miki : @Amir(MCS) Could you please send the RBC1848 roll, E0JGVC01_VC09 agv back to the warehouse? The production does not need this material, thank you very much, This machine E1PRC040 is producing new test material, that's why there are so many material problems. April 10, 2025 at 9:58 AM, Szabadi Miki : @Mohammad Amir April 10, 2025 at 9:58 AM, Mohammad Amir : Checking April 10, 2025 at 9:58 AM, Szabadi Miki : Thank you April 10, 2025 at 9:59 AM, Mohammad Amir : You are welcome April 10, 2025 at 10:03 AM, duzzaman Md (MCS) : Successfully sent back. Thank you. April 10, 2025 at 10:03 AM, Szabadi Miki : Thank you April 10, 2025 at 10:03 AM, Mohammad Amir : You are welcome! April 10, 2025 at 10:18 AM, 조혜근 : I'm so sorry, please do it one more time April 10, 2025 at 10:18 AM, Mohammad Amir : Checking April 10, 2025 at 10:18 AM, 조혜근 : Cathode Press Unit 4 UW April 10, 2025 at 10:20 AM, Mohammad Amir : This carrier already been stored in STKC35(0100205) according to request. ✅ Thank you! April 10, 2025 at 10:22 AM, Szabadi Miki : This time E0JGVC01_VC14 , RBC1069 April 10, 2025 at 10:22 AM, Mohammad Amir : Okay, working on it! April 10, 2025 at 10:23 AM, Szabadi Miki : Thank you April 10, 2025 at 10:25 AM, Mohammad Amir : You are welcome! April 10, 2025 at 10:26 AM, Yena Valerii : come to the anode press 1 need to move robot agv number 23 to another place April 10, 2025 at 10:26 AM, Oláh András : On my way April 10, 2025 at 10:27 AM, Mohammad Amir : We have created the command to send it to its source warehouse ✅. We are monitoring the transfer. Thank you! April 10, 2025 at 10:37 AM, Mohammad Amir : Carrier has successfully stored in STKC34. Thank you very much! April 10, 2025 at 10:38 AM, Yena Valerii : come to the anode slitt, became a conveyor that takes the material, check please April 10, 2025 at 10:41 AM, Oláh András : Checking April 10, 2025 at 11:33 AM, FACS_오창훈_CHANGHOON : 음극 릴 스태커 C/V 예방점검 완료 되었고, 정상 가동 중입니다. The Anode reel stacker C/V preventive maintenance has been completed and is operating start April 10, 2025 at 11:46 AM, 김대호 (Kim Dae Ho) : @Csicskovics Balázs April 10, 2025 at 11:46 AM, Csicskovics Balázs : Ok thank you April 10, 2025 at 1:21 PM, Szarka Adrián : Sziasztok Anod roll raktár 4 PORT 20 agv kiállt hiábara April 10, 2025 at 1:21 PM, Oláh András : Megyek is April 10, 2025 at 1:21 PM, Szarka Adrián : Gyertek kerlek köszönöm April 10, 2025 at 1:26 PM, Hári Zoltàn : Szeretném jelezni, hogy az 1-es anód roll raktár ajtajának zsanérjai le vannak szakadva. Légyszi javítsátok meg! Köszönöm! April 10, 2025 at 1:27 PM, Mohammad Amir : @Oláh András Please check E1CTA010_P02 it is OOS and because of this created job is in Alternated state. Thank you! April 10, 2025 at 1:35 PM, Oláh András : No production on line and no material on the port. I dont know how job created when its oos. April 10, 2025 at 1:38 PM, Mohammad Amir : For you information:- It was Manually created by TEMP RTD I'd at 12:57 from CTA010_P02 to E0STKA31_M01. Thank you very much! April 10, 2025 at 1:42 PM, Oláh András : Please delete this job. It was a mistake from somebody April 10, 2025 at 1:42 PM, Mohammad Amir : Okay , on it. April 10, 2025 at 1:42 PM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! April 10, 2025 at 1:42 PM, Oláh András : Thank you 🙏 April 10, 2025 at 1:43 PM, Mohammad Amir : You are welcome! April 10, 2025 at 1:55 PM, Koncz Tamás : Továbbítottuk! Köszönöm! April 10, 2025 at 2:38 PM, 조혜근 : Why can't I return carrier IDs RBC2406, RBC2633, and RBC2635? April 10, 2025 at 2:38 PM, Mohammad Amir : Checking April 10, 2025 at 2:41 PM, Sazzad Bhai SKon : RBC2406: destination P02/03 is R/W means UR port. April 10, 2025 at 2:45 PM, 조혜근 : Can you send RBC2406 to UW of cathode slitter unit 3? April 10, 2025 at 2:46 PM, Mohammad Amir : For RBC2633 and RBC2635 ,the destination is E1PRC040_P01 but this port already have a job and AGV#1 is executing the task. Thank you! April 10, 2025 at 2:47 PM, Mohammad Amir : That's why you can't send now. Thank you! April 10, 2025 at 2:48 PM, 조혜근 : RBC2633 and RBC2635 are press UW. Thank you, I understand April 10, 2025 at 2:48 PM, 조혜근 : But RBC2406 should come to the slitter UW, but it's not coming April 10, 2025 at 2:49 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 2:49 PM, Mohammad Amir : I am checking this. April 10, 2025 at 2:50 PM, Mohammad Amir : Please try again. Thank you! April 10, 2025 at 2:51 PM, Mohammad Amir : For you information:- The UW port is P01 on case of slitter machines. Thank you! April 10, 2025 at 2:52 PM, 조혜근 : Okay April 10, 2025 at 2:55 PM, 김대호 (Kim Dae Ho) : Please check Cathode press 3 L/R @Mohammad Amir April 10, 2025 at 2:55 PM, Mohammad Amir : Checking April 10, 2025 at 2:56 PM, Mohammad Amir : LR received successfully at 12:48 AGV #7 on the way. Thank you! April 10, 2025 at 2:57 PM, 김대호 (Kim Dae Ho) : Thank you 👍 April 10, 2025 at 2:57 PM, Mohammad Amir : You are welcome! April 10, 2025 at 3:06 PM, Mohammad Amir : For your information, I checked for RBC2633 and RBC2635 you can't transfer to Press-4 as these materials are not available for transfer as these are getting filtered which makes it unavailable materials for press -4_P01. E1PRC040_P01 there is only one material available RBC1848. If you want materials for Pressing -4 you can get by pressing LR. Thank you very much! April 10, 2025 at 3:15 PM, 조혜근 : OK, thank you April 10, 2025 at 3:15 PM, Mohammad Amir : You are welcome! April 10, 2025 at 3:21 PM, Mohammad Amir : For you information:- For RBC2406 it is not appropriate for Slitter-3 P01 that's why job is not executing by RTD. Thank you very much! April 10, 2025 at 3:24 PM, 조혜근 : Something seems to be wrong April 10, 2025 at 3:24 PM, 조혜근 : It's a normal product, but it's strange that it doesn't come April 10, 2025 at 3:26 PM, Mohammad Amir : For RBC2406- If you try to transfer using RTD ,it will not execute this command as according to RTD rules this material is not appropriate for Slitter -3 P01 and that's why RTD is not executing this command. Thank you very much! April 10, 2025 at 3:28 PM, Mohammad Amir : Same scenario for RBC2633 and 2635, As these are not appropriate for pressing-4_P01 and getting filtered during RTD rule. Thank you very much! April 10, 2025 at 3:35 PM, Mohammad Amir : If you really need these materials you can transfer using MCS and it should come. However I will suggest you not to do this Practice as it doesn't follow the Rule and these materials are not appropriate for mentioned process machine. Thank you very much! April 10, 2025 at 3:44 PM, Sazzad Bhai SKon : RBC2406: lot EC2P081F4101G1 , process segment id is E2300. What means it is a material for Cathode Roll Warehouse. April 10, 2025 at 3:44 PM, Mohammad Amir : That's the reason we are not sending the mentioned materials. Thank you very much for your understanding! April 10, 2025 at 3:50 PM, 조혜근 : Yes, I understand everything April 10, 2025 at 3:50 PM, 조혜근 : I think the information is misrepresented April 10, 2025 at 3:51 PM, 조혜근 : It's a special case, so I'm going to work manually April 10, 2025 at 3:51 PM, 조혜근 : Thank you April 10, 2025 at 3:51 PM, Mohammad Amir : Thank you very much,Sir! April 10, 2025 at 3:51 PM, Mohammad Amir : You are welcome,Sir! April 10, 2025 at 6:11 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 10 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 10, 2025 at 6:32 PM, Baek Hojong(백호종)FA : @배일명 조장님 코터 음극 2라인 설비 정상가동시 카톡 공유주시면 AGV 자동반송 진행하겠습니다 April 10, 2025 at 6:37 PM, 배일명 : 10분이내로 생산 시작할예정입니다. April 10, 2025 at 7:03 PM, Koska Szilárd János : Sziasztok rátudnátok nézni hogy miért nem hoz anyagot az Anód slittre köszi 20 perce megvan kérve April 10, 2025 at 7:03 PM, Simon Attila F. A. : Nézem April 10, 2025 at 7:05 PM, Shahbaz 샤바즈 MCS/RTD : Please check Anode roll STK A34 port P01 is OOS. Thank you April 10, 2025 at 7:07 PM, Simon Attila F. A. : Working now. April 10, 2025 at 7:11 PM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD Good evening! Can you check avialable materiel toan slitt? April 10, 2025 at 7:14 PM, Shahbaz 샤바즈 MCS/RTD : Good evening: Slitter available materials: An unit 1/2 : 2 An unit 3 : 182 Ca unit 1/2 : 100 Ca unit 3 : 0 April 10, 2025 at 7:15 PM, Yanina : Sziasztok) Cathode slitt Nagyon lassan jön a tálca April 10, 2025 at 7:19 PM, Simon Attila F. A. : Nézzük. Pill. April 10, 2025 at 7:19 PM, Simon Attila F. A. : Thank you! April 10, 2025 at 7:48 PM, Yanina : Sziasztok) Cathode slitt 3 nincs AGV 30p April 10, 2025 at 7:49 PM, Simon Attila F. A. : Nézzük. April 10, 2025 at 7:50 PM, Shahbaz 샤바즈 MCS/RTD : No lot available for Ca slitter 3 April 10, 2025 at 7:50 PM, Simon Attila F. A. : Txs! April 10, 2025 at 10:21 PM, Simon Attila F. A. : @Koska Szilárd János kis türelmet kérünk, dolgozunk az anód slitt konvejor hibáján. April 10, 2025 at 10:29 PM, Simon Attila F. A. : Működik a konvejor. April 11, 2025 at 3:06 AM April 11, 2025 at 3:06 AM, Yanina : Sziasztok, Cathode slitt 2 Beragadt tàlcà April 11, 2025 at 3:07 AM, Marsi Gábor : Megyünk April 11, 2025 at 3:30 AM, Yanina : Sziasztok) Cathode slitt Nagyon lassan jön a tálca . April 11, 2025 at 5:06 AM, K.Krisz Coating : An 2 AGV nem pozicional a 2 r/w-nél. Kérek segitséget. Kösze April 11, 2025 at 5:07 AM, Skwarek Tibor : Megyek April 11, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12(+1) Tech, 1Sl Overtime(0): Holiday(2+1): Rácz Dániel, Czeilinger Krisztián (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Csanálosi Gábor, Böröcz Tamás --------------- Assy GF (2): Pintye Miklós, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 11, 2025 at 6:41 AM, Szarka Adrián : Anod Sl asztalnál 17 agv ki állt hibára gyertek kerlek April 11, 2025 at 6:45 AM, Szarka Adrián : ? April 11, 2025 at 6:45 AM, Szücs Géza FT-B : @Pálosi Róbert kérekmezek beavatkozást. köszönöm April 11, 2025 at 6:56 AM, Pálosi Róbert : Mwgyünk April 11, 2025 at 6:56 AM, Pálosi Róbert : Kész April 11, 2025 at 7:14 AM, Nagy Dávid 4 : A anod press 2 20 perce nincsen agv help help köszönöm szépen April 11, 2025 at 7:16 AM, Nagy Dávid 4 : 23 számú agv April 11, 2025 at 7:17 AM, Shakir (MCS) : Job exists for press2 @FA Please check AGV23 on manual. Job getting delayed. Thank you April 11, 2025 at 7:19 AM, Shakir (MCS) : @FA @Pálosi Róbert Please check, there is AGV traffic AGV23 blocked other AGVs. Thank you April 11, 2025 at 7:20 AM, Pálosi Róbert : I"m going April 11, 2025 at 7:23 AM, Shakir (MCS) : Issue has been resolved ✅ AGV#23 now started to move Now you will receive the materials soon. We are monitoring! Thank you very much! April 11, 2025 at 7:24 AM, Shakir (MCS) : Thank you now agv traffic has been cleared. Thank you April 11, 2025 at 7:27 AM, Pálosi Róbert : Solved April 11, 2025 at 7:34 AM, Shakir (MCS) : Carrier has been arrived on press2 ✅ Thank you April 11, 2025 at 7:36 AM, Nagy Dávid 4 : Thank you very much April 11, 2025 at 7:37 AM, Shakir (MCS) : You’re welcome April 11, 2025 at 7:38 AM, Shakir (MCS) : @Pálosi Róbert @FA Please check agv07 under alarm blocked other agvs. Thank you April 11, 2025 at 7:46 AM, Nagy Dávid 4 : Anod press 4 R/W robot probléma help help köszönöm szépen April 11, 2025 at 7:47 AM, Nagy Dávid 4 : Anod press 2 R/W agv kiált hibára help help köszönöm April 11, 2025 at 7:48 AM, Shakir (MCS) : Issue has been resolved ✅ Thank you April 11, 2025 at 7:50 AM, Nagy Dávid 4 : Anod oldalon 1-es agv kiált hibára help help köszönöm szépen April 11, 2025 at 8:24 AM, Viktoriia Hleba : Anod slitt2 nincs AGV 35 perc . Köszönöm April 11, 2025 at 8:28 AM, Shakir (MCS) : Job exists for slitt2 AB @FA @Pálosi Róbert Please check AGV07 under alarm creating traffic, other agvs route are blocked. Job getting delayed. Thank you April 11, 2025 at 8:31 AM, Böröcz Tamás : Agvs on the way April 11, 2025 at 8:33 AM, Shakir (MCS) : AGV07 on the way for slitt2 AN You will receive material soon. We are monitoring! Thank you very much! April 11, 2025 at 8:34 AM, Anton Mashchenko : Hello, cathode press 4, AGV not coming 10 min! Help! Thanks! April 11, 2025 at 8:35 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @TP조장님 금일 양극 2라인 코터 생산으로 알고있습니다. 금일 AGV 사용 가능시점 알수 있을까요? April 11, 2025 at 8:36 AM, Sazzad Bhai SKon : Vehicle 17 has auto select abnormal error. MCS order is normal. April 11, 2025 at 8:37 AM, Sazzad Bhai SKon : This is anode side April 11, 2025 at 8:38 AM, Shakir (MCS) : Please press LR Thank you April 11, 2025 at 8:39 AM, Shakir (MCS) : We received Last LR at 07:48 and job has been completed at 08:02. After that NO LR received. Thank you April 11, 2025 at 8:47 AM, Anton Mashchenko : I can't press LR again because the roll is currently pending on the R/W machine. April 11, 2025 at 8:48 AM, KIM SEYEON [김세연]_FA : @장영환(Younghwan Chang) 님 코터 양극 4라인 이재기 ㅡ 터렛 점검을 10시반에 하고 싶습니다. 제어인원 지원 부탁드립니다. 감사합니다. April 11, 2025 at 8:51 AM, Shakir (MCS) : AGV13 is on the way for Press4 CA. Monitoring further Thank you April 11, 2025 at 8:55 AM, Anton Mashchenko : Thank you! April 11, 2025 at 9:04 AM, Viktoriia Hleba : 1 slitter cathode u/w robot stop. Kérem, nézze meg! Koszi April 11, 2025 at 9:04 AM, Shakir (MCS) : Job has been completed successfully. Issue has been resolved ✅ Thank you April 11, 2025 at 9:06 AM, Anton Mashchenko : AGV brought the roll from the warehouse, but did not take the finished roll to the warehouse, the problem is not solved! April 11, 2025 at 9:07 AM, Shakir (MCS) : @FA Please check the issue Thank you April 11, 2025 at 9:11 AM, Shakir (MCS) : We received UR from the P02 but it was failed because the carrier location mismatch. Carrier exist in two place first at P02 and second E0STKC35_M01. @FA PLEASE CHECK THE M01 port Is any carrier available. Thank you April 11, 2025 at 9:12 AM, Shakir (MCS) : @Pálosi Róbert April 11, 2025 at 9:12 AM, Böröcz Tamás : M01 is empty April 11, 2025 at 9:13 AM, Böröcz Tamás : And we could not see any data there April 11, 2025 at 9:17 AM, Shakir (MCS) : Could you please press UR again Thank you April 11, 2025 at 9:18 AM, Böröcz Tamás : It's not available April 11, 2025 at 9:20 AM, Böröcz Tamás : Because the machine started to unload the cargo April 11, 2025 at 9:20 AM, Böröcz Tamás : So I made a manual transfer order April 11, 2025 at 9:21 AM, Shakir (MCS) : Yes Job has been initiated. Agv05 has been assigned Thank you April 11, 2025 at 9:22 AM, Böröcz Tamás : So do I April 11, 2025 at 9:22 AM, Shakir (MCS) : @Anton Mashchenko Now issue has been resolved. Thank you April 11, 2025 at 9:29 AM, 장영환(Younghwan Chang) : 내용 전달했습니다 April 11, 2025 at 9:51 AM, Böröcz Tamás : @MCS Agv 22 arrived to anode press 2 p01 but the buffer is full April 11, 2025 at 9:54 AM, Shakir (MCS) : Because manual job creation by ID TEMP, that’s why agv22 came with carrier RBA0143. April 11, 2025 at 9:55 AM, Böröcz Tamás : Nice April 11, 2025 at 9:55 AM, Böröcz Tamás : Actual roll almost finished April 11, 2025 at 9:56 AM, Böröcz Tamás : But we don't need the very next roll April 11, 2025 at 9:56 AM, Böröcz Tamás : Maybe the test some material April 11, 2025 at 9:57 AM, Shakir (MCS) : So, they don’t material which is on the agv22? April 11, 2025 at 9:57 AM, Shakir (MCS) : Need** April 11, 2025 at 9:58 AM, Böröcz Tamás : I just guess April 11, 2025 at 9:59 AM, Shakir (MCS) : Please confirm if they don’t need that material send it back to stk. Thank you April 11, 2025 at 10:01 AM, Böröcz Tamás : @manufacturing @TEMP April 11, 2025 at 10:07 AM, Shakir (MCS) : AGV22 just unloaded the carrier, job has been completed. ✅ Thank you April 11, 2025 at 10:08 AM, Szarka Adrián : Katod roll raktárba szeretnék egy kis segítséget kérni köszönöm. 2 raktár April 11, 2025 at 11:03 AM, Viktoriia Hleba : Anod slit 3 robot problema. Kérem, nézze meg! Koszi April 11, 2025 at 11:30 AM, Shakir (MCS) : @FA Please check Anode roll STK A34 port P01 is OOS. Thank you April 11, 2025 at 11:32 AM, Csanálosi Gábor FA : Solved April 11, 2025 at 11:33 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @TP조장님 금토일 코터 생산계획을 알려주시면 인력 대기하도록 하겠습니다. 감사합니다. April 11, 2025 at 11:33 AM, Shakir (MCS) : Still OOS April 11, 2025 at 11:34 AM, Csanálosi Gábor FA : Yup, i see, omw back there April 11, 2025 at 11:36 AM, Csanálosi Gábor FA : Now its done April 11, 2025 at 11:37 AM, Shakir (MCS) : Yes, Thank you April 11, 2025 at 11:37 AM, 서지원 : 4/11(금) 1. 양극 2라인 연속생산 2. 양극 4라인 연습생산 ~~> 조건 설정 오랜 시간 필요, 코팅롤 생산 예정 시간 야간 시프트 4/12(토) 1. 양극 2라인 연속생산 2. 음극 2라인 연속생산 4/13(일) 1. 양극 2라인 연속생산 2. 음극 2라인 연속생산 (토요일 완료 못할 시) April 11, 2025 at 11:38 AM, Viktoriia Hleba : 1 slitt cathode. R/w robot problema. Kérem, nézze meg! Köszönöm ! April 11, 2025 at 11:47 AM, Csanálosi Gábor FA : Kész April 11, 2025 at 12:31 PM, Nagy Dávid 4 : Anod roll raktár megált help help köszönöm szépen April 11, 2025 at 12:50 PM, Shakir (MCS) : @FA Please check An Roll Stocker A35 “Material loosening (left)” Thank you April 11, 2025 at 1:04 PM, Pálosi Róbert : Solved April 11, 2025 at 2:11 PM, Böröcz Tamás : @mcs There's a roll on anode AGV 11 April 11, 2025 at 2:12 PM, Böröcz Tamás : Forward to the press 4 p01 but manufacturing don't want to use it April 11, 2025 at 2:12 PM, Böröcz Tamás : Could you send it back to the storage? April 11, 2025 at 2:12 PM, Shakir (MCS) : On it April 11, 2025 at 2:15 PM, Böröcz Tamás : It's NG so we have to prohibit to transfer this reel to the manufacturing April 11, 2025 at 2:16 PM, Shakir (MCS) : Job has been initiated, check the agv alrm April 11, 2025 at 2:16 PM, Csanálosi Gábor FA : Thx April 11, 2025 at 2:32 PM, Shakir (MCS) : Job has been successfully completed ✅ Carrier stored in E0STKA33(0100303) Thank you April 11, 2025 at 2:50 PM, Anton Mashchenko : Come to anode press 4, AGV 17 error! Thanks! April 11, 2025 at 3:52 PM, Nagy Dávid 4 : Anod press 4 R/W robot probléma help help köszönöm szépen April 11, 2025 at 4:45 PM, Nagy Dávid 4 : Anod press 4 R/W robot probléma help help köszönöm szépen April 11, 2025 at 4:47 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @TP조장님 오늘 코터 4라인 연습생산 시 EPC값은 +-30MM를 넘지 않도록 세팅해주시면 감사하겠습니다. April 11, 2025 at 4:48 PM, KIM SEYEON [김세연]_FA : 차주 음극 코터 4라인도 마찬가지입니다. April 11, 2025 at 4:48 PM, Csanálosi Gábor FA : Kész April 11, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 11, 2025 at 6:55 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 11 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 11, 2025 at 8:53 PM, Oleksii Krasnoshchok : Hello, anode press 2 u/w transfer stop April 11, 2025 at 10:30 PM, Powder tréner : Sziasztok,szeretnék kérni segítséget,powder Katód oldalon elakadt az AGV (ferdén berakta a paletát a portba és elakadt nem reagál semire).Köszönöm. April 11, 2025 at 11:15 PM, adambenczik : Kész April 12, 2025 at 12:12 AM April 12, 2025 at 12:12 AM, Powder tréner : Hello,powder Katod E1PLC0321_P02 port-ra rendelt anyagot automata raktár nem adja ki. Nézzétek rá. April 12, 2025 at 12:54 AM, Oleksii Krasnoshchok : Hello, anode press 2 u/w transfer stop April 12, 2025 at 1:10 AM, Powder tréner : S.O.S Katód powder air showerben elakadt az AGV. April 12, 2025 at 2:37 AM, Powder tréner : 0Heló,Katódon poron megint ferdén betete a paletát az AGV. April 12, 2025 at 3:26 AM, Szeitz Flórián : Sziasztok! Anód roll raktárba AGV feltorlodás van. Légyszives gyertek . Köszönöm April 12, 2025 at 4:27 AM, Oleksii Krasnoshchok : Same problem April 12, 2025 at 6:15 AM, Anton Mashchenko : Hello, come to cathode press 3, AGV 21 position error! Thanks! April 12, 2025 at 6:15 AM, Szücs Géza FT-B : srácok úton vannak April 12, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása válto April 12, 2025 at 6:32 AM, Szücs Géza FT-B : @Szappanos Gábor Szia, a mai napra vonatkozóan tudsz termelési tervet? Melyik sor fog menni és használtok-e oda AGV-t? Köszönjük szépen az infókat. April 12, 2025 at 6:34 AM, Szappanos Gábor : Szia. Katód 2 termel, egyenlőre nem használunk Agv-t. April 12, 2025 at 7:21 AM, Viktoriia Hleba : 2 slitter anode robot r/w problrema April 12, 2025 at 7:21 AM, Viktoriia Hleba : Kérem, nézze meg! Köszönöm April 12, 2025 at 7:21 AM, Szabadi Miki : Megyünk April 12, 2025 at 7:34 AM, Viktoriia Hleba : 1 slitter cathode r/w robot stop. April 12, 2025 at 7:35 AM, Czeilinger Krisztián : Nemsokára megyünk. April 12, 2025 at 7:54 AM, Rácz Dániel / FA : @valaki aki tudja hogyan kell homeolni a transfereket és a buffereket legyen szíves segíteni az AN Slitt 2-nél illetve a CA Slitt 1-nél köszönöm. April 12, 2025 at 7:54 AM, Mohammad Amir : @Szabadi Miki Please check E0CNVA51_6182 there is servo motor Alaram occured. Thank you! April 12, 2025 at 8:16 AM, Szabadi Miki : Working on it April 12, 2025 at 8:16 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 8:17 AM, Mohammad Amir : This issue has been resolved ✅. Thank you! April 12, 2025 at 8:17 AM, Mohammad Amir : @Szabadi Miki Please check E0STKC32_C01 there is SCP main power CP trip error causing some transfer to be delayed. Thank you! April 12, 2025 at 8:17 AM, Szabadi Miki : You are welcome April 12, 2025 at 8:18 AM, Szabadi Miki : Checking April 12, 2025 at 8:18 AM, Szappanos Gábor : Hali. Katód jumbo raktar kiállt hibára legyetek szívesek megnézni. 1-es, és 2-es. Köszi April 12, 2025 at 8:19 AM, Szabadi Miki : Mindjárt megyünk April 12, 2025 at 9:30 AM, Mohammad Amir : @Szabadi Miki Please check two jobs are Alternated cause E1CTC020_P02/03 is OOS. Thank you very much! April 12, 2025 at 9:33 AM, Czeilinger Krisztián : @Mohammad Amir going. April 12, 2025 at 9:33 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 9:40 AM, Czeilinger Krisztián : This message was deleted. April 12, 2025 at 9:40 AM, Czeilinger Krisztián : According to the trainer, these two ports are not used on the E1CTC020 _P02/03 machine. No information was provided about them. April 12, 2025 at 9:40 AM, Mohammad Amir : Okay,thank you very much! April 12, 2025 at 11:32 AM, Viktoriia Hleba : 3 slitter cathode nem jo szám tárca. Robot r/w problema . Kérem, nézze meg! Köszönöm April 12, 2025 at 11:37 AM, Czeilinger Krisztián : @Szücs Géza FT-B UNK2025041 Ezt a tálcát ki kellene vezetni mivel a (Bar code) sérült. April 12, 2025 at 11:40 AM, Czeilinger Krisztián : UNK20250412112411 April 12, 2025 at 11:51 AM, Rácz Dániel / FA : @Szücs Géza FT-B unknown soldier April 12, 2025 at 11:54 AM, Szücs Géza FT-B : vegyétek ki April 12, 2025 at 2:44 PM, Viktoriia Hleba : 1 slitter cathode r/w robot stop. April 12, 2025 at 2:44 PM, Szabadi Miki : Megyünk April 12, 2025 at 3:01 PM, Mohammad Amir : @Szabadi Miki Please check E0STKC34_P01 there is IPS sensor reading fails error. Thank you! April 12, 2025 at 3:02 PM, Szabadi Miki : Okay checkink April 12, 2025 at 3:02 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 3:04 PM, Mohammad Amir : E0STKC34(4199 )as well ,have same error check this one as well, please. Thank you very much! April 12, 2025 at 3:42 PM, Erik Gerzsenyi : Sziasztok Anod press 2 r/w robot kiallt hibara April 12, 2025 at 3:43 PM, Czeilinger Krisztián : Megyünk. April 12, 2025 at 3:46 PM, Czeilinger Krisztián : Kész. April 12, 2025 at 4:20 PM, Czeilinger Krisztián : E0STK001 kész. April 12, 2025 at 4:41 PM, Viktoriia Hleba : 3 slitter anode - r/w robot stop. Kérem, nézze meg! April 12, 2025 at 4:46 PM, Szabadi Miki : Megyek April 12, 2025 at 5:06 PM, Nagy Dávid 4 : Anod press 2 robot megàllt fenykapu miatt help help köszönöm szépen April 12, 2025 at 5:07 PM, Szabadi Miki : Megyünk April 12, 2025 at 5:08 PM, Nagy Dávid 4 : Köszönöm szépen (thumbsup) April 12, 2025 at 5:10 PM, Szabadi Miki : Nagyon szivesen bàrmit bármikor (wow) April 12, 2025 at 5:51 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2+2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 12, 2025 at 6:48 PM, Kurgya Attila : Sziasztok Segítséget kérek fólia raktárhoz. Köszönöm April 12, 2025 at 6:51 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 12 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 12, 2025 at 10:49 PM, Oleksii Krasnoshchok : Hello in anode press 2 u/w transfer stoped April 12, 2025 at 11:01 PM, adambenczik : Kész April 13, 2025 at 1:40 AM April 13, 2025 at 1:40 AM, Powder tréner : Powder katódon elakadt az AGV.Nézetek rá. April 13, 2025 at 1:48 AM, adambenczik : Megyünk April 13, 2025 at 3:50 AM, Karina Lyzanets : Sziasztok) Slitt Cathode 3 nincs AGV 20 perc Kérek nézzetek meg Köszönöm April 13, 2025 at 3:53 AM, VK (mcs) : There is no available material April 13, 2025 at 4:26 AM, Powder tréner : Poron Katód raktár (Data mismatch Error) kiáll.Nézétek rá.Köszönöm. April 13, 2025 at 6:17 AM, Csicskovics Balázs : Sziasztok Anode press 2 60 perce nem jön az AGV nézzétek meg légyszíves April 13, 2025 at 6:19 AM, Szücs Géza FT-B : Szia, nem látom, hogy lenne rá order. @MCS pls check the available materials thank You April 13, 2025 at 6:20 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Fabriczius Gergely, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztá April 13, 2025 at 6:20 AM, Shakir (MCS) : Hello, Good morning There is No Lot Available since 4:38 that why’s material not come to press 2, Once material available automatically job will create. Thank you April 13, 2025 at 6:25 AM, Nagy Dávid 4 : Katod oldalon a 12 agv kiált hibára help help köszönöm szépen April 13, 2025 at 6:41 AM, Shakir (MCS) : @FA @Czeilinger Krisztián Please check Roll stk A32, Manufacture abnormal Detection timeout. Thank you April 13, 2025 at 6:44 AM, Viktoriia Hleba : 3 slitter anode . Kés problema r/w . Kérem, nézze meg! Köszönöm April 13, 2025 at 6:46 AM, Viktoriia Hleba : 3 slitter cathode nincs AGV-20 perc . April 13, 2025 at 6:47 AM, Czeilinger Krisztián : Coming April 13, 2025 at 6:48 AM, Shakir (MCS) : Hello, Good morning There is No Lot Available since 03:14 that why’s material not come to slitt3, Once material available automatically job will create. Thank you April 13, 2025 at 6:50 AM, Anton Mashchenko : Hello, cathode press 4, AGV not coming 10 min! Help! Thanks! April 13, 2025 at 6:52 AM, duzzaman Md (MCS) : Hello, Good morning There is no recent LR, Please press LR. Last LR received at 6.10 . Thank you April 13, 2025 at 6:52 AM, Czeilinger Krisztián : no technical error. April 13, 2025 at 6:53 AM, Anton Mashchenko : I clicked 10 minutes ago April 13, 2025 at 6:54 AM, duzzaman Md (MCS) : Kindly press again. From MCS side, we don't see it. April 13, 2025 at 6:58 AM, Anton Mashchenko : I can't do it again because the roll is already in standby. April 13, 2025 at 6:59 AM, Anton Mashchenko : The AGV has arrived, thank you! April 13, 2025 at 7:01 AM, duzzaman Md (MCS) : Thank you too. We are monitoring it. April 13, 2025 at 7:13 AM, Shakir (MCS) : Job has been initiated for slitt3 CA. AGV21 assigned ✅ Thank you April 13, 2025 at 7:32 AM, Csicskovics Balázs : Anode SL asztalnál lehalt egy AGV (19) Gyertek légyszíves Köszönöm April 13, 2025 at 9:13 AM, Böröcz Tamás : Katód jumbotól nem megy el 5 perce az AGV katód press 5 help help pls April 13, 2025 at 9:14 AM, Böröcz Tamás : Bobintol nem megy el 5 perce az AGV katód press 2 uw help help pls April 13, 2025 at 9:16 AM, Rácz Dániel / FA : A31-es raktárnál a jumbo kocsi útban van, nem megy el az AGV #2 April 13, 2025 at 9:16 AM, Böröcz Tamás : Help help pls April 13, 2025 at 9:25 AM, Shakir (MCS) : @FA @ACS Please check AGV02 AN idle on route, blocking other agvs causing job delayed. Thank you April 13, 2025 at 9:28 AM, Böröcz Tamás : @mcs April 13, 2025 at 9:33 AM, duzzaman Md (MCS) : @ACS Could you please move the AGV #02 to other place. So, the traffic can be normalised. There's no job for AGV#02 but it's blocking others. April 13, 2025 at 9:33 AM, Böröcz Tamás : Agv in auto mode April 13, 2025 at 9:34 AM, Böröcz Tamás : Manufacturing left the transfering car there. I don't get enough money for my work nor for the others. Thanks for understanding. April 13, 2025 at 9:39 AM, duzzaman Md (MCS) : The responsible person/department for this task, kindly take care of AGV #02 at the soonest. It's delaying the job for Slit 2 and PRess 2. April 13, 2025 at 10:06 AM, Czeilinger Krisztián : Looking. April 13, 2025 at 10:07 AM, duzzaman Md (MCS) : Already solved. Thank you April 13, 2025 at 10:43 AM, Nagy Dávid 4 : Katod press 2-es gépnél az 5-ös agv kiált hibára help help köszönöm szépen April 13, 2025 at 10:56 AM, Rácz Dániel / FA : @Böröcz Tamás megyek a porra ! April 13, 2025 at 12:19 PM, Pintér Gábor : Szaisztok Katód Jumbo raktárhoz szeretnénk segítséget kérni (coating) April 13, 2025 at 12:28 PM, Czeilinger Krisztián : Megyünk. April 13, 2025 at 1:52 PM, Böröcz Tamás : Több mint 4 óra eltelt de nem ment arrébb magától a raklap. Help help pls April 13, 2025 at 2:38 PM, Pintér Gábor : Sziasztok megint problémánk van🥲 April 13, 2025 at 2:45 PM, Pintér Gábor : @Sazzad Bhai SKon we have a problem at the cathode Jumbo storage #1 April 13, 2025 at 3:12 PM, Shakir (MCS) : @Fa Roll stk C31 is OOS, Is there any maintenance going on ? Thank you April 13, 2025 at 3:18 PM, Böröcz Tamás : There was problem with manual infeed. We had to restart the barcode reeder April 13, 2025 at 5:16 PM, Pintér Gábor : Katód Jumbo raktárnál beleesett egy fólia a fénykapuba es megállt minden szeretnénk segitseget kerni April 13, 2025 at 5:21 PM, Shakir (MCS) : @FA Please check Roll stk C31_P01 is OOS, light curtain detected error. Job getting delayed for Press3. Thank you April 13, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 6:42 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 13 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi April 13, 2025 at 6:52 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 2 nincs AGV 25 perc April 13, 2025 at 6:52 PM, Karina Lyzanets : Kérek nézzetek meg, köszi April 13, 2025 at 7:06 PM, Karina Lyzanets : !!! April 13, 2025 at 7:07 PM, adambenczik : Úton van April 13, 2025 at 9:36 PM, Szeitz Flórián : Anód Slitt 3 ra kérnék segítséget. April 13, 2025 at 9:37 PM, adambenczik : Kész April 13, 2025 at 10:32 PM, (Unknown) left this chatroom. April 14, 2025 at 3:07 AM April 14, 2025 at 3:07 AM, Powder tréner : Sziasztok Katodon a raklapberakó portokon az AGV lenyomata szenzorokat nézétek rá. April 14, 2025 at 4:17 AM, Szeitz Flórián : Anód Slitt 2 megnéznétek az AGV mozgàsàt ? Lehetséges hogy már nem talàl roll-t a raktárba? April 14, 2025 at 4:18 AM, Mr.Miti (미티) FA : Nézem April 14, 2025 at 4:18 AM, Szeitz Flórián : Köszönöm April 14, 2025 at 4:28 AM, Mr.Miti (미티) FA : @Shahbaz 샤바즈 MCS/RTD Is there any material available to E1SLA020 ? Check please. Thank you! April 14, 2025 at 4:31 AM, Shahbaz 샤바즈 MCS/RTD : Currently No lot available April 14, 2025 at 4:31 AM, Mr.Miti (미티) FA : Thank you very much! April 14, 2025 at 7:56 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @TP조장님 금주 코터 생산계획을 공유해주실수 있을까요? AGV 적용을 위해서입니다. April 14, 2025 at 8:03 AM, FACS_JaewonShin invited FACS_Bareum kim. April 14, 2025 at 8:20 AM, Shakir (MCS) : @FA Please check E0STKC31_P01 is OOS causing delay in material suppy to press4. Thank you April 14, 2025 at 8:21 AM, Simon Attila F. A. : We are here. Ths. April 14, 2025 at 8:29 AM, Yanina : Anód slitt 2 hosszú ideje nem volt anyag.Kérjük, nézze meg April 14, 2025 at 8:31 AM, Simon Attila F. A. : 03:30 óta várakozik. Lehet, hogy nincs elérhető anyag erre a gépre. April 14, 2025 at 8:32 AM, Simon Attila F. A. : @mcs can you check this? Thank you. April 14, 2025 at 8:32 AM, Mohammad Amir : Check April 14, 2025 at 8:34 AM, Shakir (MCS) : No material available now as soon as material available job will create. Thank you April 14, 2025 at 8:35 AM, Simon Attila F. A. : Thanks for information! April 14, 2025 at 8:35 AM, Shakir (MCS) : We received LR at 3:30. We will monitoring further Thank you April 14, 2025 at 8:40 AM, Shakir (MCS) : @Simon Attila F. A. Still exists Please check April 14, 2025 at 8:45 AM, Simon Attila F. A. : Working now. April 14, 2025 at 10:36 AM, Shakir (MCS) : @FA @Simon Attila F. A. Please check E0STKA34_P01 is OOS causing delay in material suppy to press4. Thank you April 14, 2025 at 10:37 AM, Simon Attila F. A. : I coming. Txs. April 14, 2025 at 10:40 AM, Simon Attila F. A. : Solved. April 14, 2025 at 10:41 AM, Shakir (MCS) : Thank you April 14, 2025 at 10:41 AM, Simon Attila F. A. : Thank you too. April 14, 2025 at 11:03 AM, 김대호 (Kim Dae Ho) : Please check Cathode sliter 4 L/R @Shakir (MCS) April 14, 2025 at 11:03 AM, Mohammad Amir : @Simon Attila F. A. Please check E0STKC33_C01 there is travel Log error and few jobs are waiting. Thank you! April 14, 2025 at 11:04 AM, Mohammad Amir : Checking. April 14, 2025 at 11:05 AM, Mohammad Amir : LR received successfully at 10:58 ,job created at 11:01 with RBC2044. Carrier is not moving cause currently E0STKC33 is OOS ,I already informed the FA team. Thank you! April 14, 2025 at 11:07 AM, 김대호 (Kim Dae Ho) : Ok! Thank you !👍 April 14, 2025 at 11:07 AM, Mohammad Amir : You are welcome! April 14, 2025 at 11:09 AM, Simon Attila F. A. : Solved. Txs. April 14, 2025 at 11:09 AM, Mohammad Amir : You are welcome! April 14, 2025 at 11:12 AM, Shakir (MCS) : AGV#01 has been assigned Carrier on the way to slitt4✅ Thank you April 14, 2025 at 11:21 AM, Shakir (MCS) : @FA @Simon Attila F. A. Please check AGV01 CA is idle since 11:14 having carried for slitt4. Job getting delayed. Thank you April 14, 2025 at 11:25 AM, Shakir (MCS) : Now AGV01 started to move. Moving towards slitt4 Thank you April 14, 2025 at 11:27 AM, Simon Attila F. A. : Thank you too. April 14, 2025 at 11:32 AM, 조혜근 : 혹시 양극 슬리터 4,5호기로 가는 AGV길이 막혀있는지 확인 가능할까요? 이제 양슬 4,5호기 가동하려고 UW롤 롤 불렀는데 AGV가 가다가 멈춰있습니다 April 14, 2025 at 11:34 AM, Shakir (MCS) : Please check again agv01 idle without error. Thank you April 14, 2025 at 11:35 AM, Simon Attila F. A. : Ok. I coming. April 14, 2025 at 11:42 AM, Simon Attila F. A. : The ca agv1 moving again. April 14, 2025 at 11:42 AM, Shakir (MCS) : Thank you We Monitoring further April 14, 2025 at 11:43 AM, Simon Attila F. A. : Thank you for help! April 14, 2025 at 11:43 AM, Shakir (MCS) : You’re welcome April 14, 2025 at 11:59 AM, Shakir (MCS) : @ACS @FA @Simon Attila F. A. Could please check the AGV#01 has job for slitt4 but it rotates and idle at same node. Causing material delay. Thank you April 14, 2025 at 12:00 PM, Simon Attila F. A. : Please be patient. We are on another error... April 14, 2025 at 12:11 PM, Simon Attila F. A. : I check... April 14, 2025 at 12:17 PM, Simon Attila F. A. : A section of road that we hadn't used before was blocked. Now the AGVs are coming. April 14, 2025 at 12:17 PM, Shakir (MCS) : Thank you April 14, 2025 at 1:22 PM, 서지원 : 1. Cathode 2nd line : 4/14 ~ 4/16 2. Anode 1st line : 4/14 (night shift) ~ next week 3. Cathode 1st line : 4/17 ~ next week April 14, 2025 at 1:56 PM, Koska Szilárd János : Gyertek létszives katód rollraktához köszi April 14, 2025 at 1:57 PM, Farkas Tamàs : Megyünk April 14, 2025 at 2:02 PM, Farkas Tamàs : Kész April 14, 2025 at 2:18 PM, Shakir (MCS) : @FA Please Check E0STKA32_M01 is OOS. Thank you April 14, 2025 at 2:19 PM, K.Krisz Coating : Hali! Kat 2-te üzembe veszük az AGV-et. April 14, 2025 at 3:01 PM, Shakir (MCS) : @FA @Simon Attila F. A. Please check Slitt4 AN, P01 is OOS, Because of this one job RBA1798 is alternated. Thank you April 14, 2025 at 3:01 PM, Lődy Márton : Szeretnénk használni az agv-ket katód 2 coatingon, amihez jó lenne ha lennének FA támogatóink. Segítenétek benne? April 14, 2025 at 3:02 PM, Farkas Tamàs : Igen megy valaki April 14, 2025 at 3:23 PM, Shakir (MCS) : AGV#22 has been assigned Carrier on the way Thank you April 14, 2025 at 3:44 PM, 서지원 : Kat 2 probáljuk hasznalatba venni az AGV-et,de 1 töltön dekol,1 - rá van irva,hogy ne hasznald/veszély,a harmadik is rossz. April 14, 2025 at 3:45 PM, 서지원 : 양극 코팅 2라인 agv 관련하여 현황 확인 가능하실까요?? April 14, 2025 at 4:06 PM, Simon Attila F. A. : 2db agv már működik a ca coatingon. Amelyik töltőn van, az is jó. April 14, 2025 at 5:15 PM, Koska Szilárd János : Sziasztok ide tudnátok jönni Anód slitt 3 hoz megált a conveyor szalag April 14, 2025 at 5:18 PM, Viczai Tamás : Megyünk April 14, 2025 at 6:04 PM, 카스텔 발라지 F.A. : Jó estét! FA "D" műszak:12/13 +2 Overtime (2): Takács Ádám, Denkó János Sick (1):Hufnágel Dániel, Holiday (0) Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6+2): Zsurbej Zsolt, Novák Károly, Kasztel Balázs, Nagy Zsolt, Novák Zoltán, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 14, 2025 at 7:34 PM, Majláth Martin : Sziasztok catod press 4 várjuk az agv t UW-re de valahol eltévedt😬 tudna valaki segíteni? Köszi! April 14, 2025 at 7:35 PM, Oláh András : Jövök April 14, 2025 at 7:37 PM, Oláh András : @Shahbaz 샤바즈 MCS/RTD pls check order to E1PRC040_P01 April 14, 2025 at 7:40 PM, Shahbaz 샤바즈 MCS/RTD : There is a job from E0STKC31 but the stocker port P01 is occupied by another carrier which is not moving. April 14, 2025 at 7:41 PM, Oláh András : Thank you, i go and check it April 14, 2025 at 7:41 PM, Shahbaz 샤바즈 MCS/RTD : Please check RBC0707 at E0STKC31_P01, it is not moving for long time. April 14, 2025 at 7:46 PM, Oláh András : It had a port to port transfer. Aborted it and now the crane bring it into the warehouse. Appreciate for your help 🙏 April 14, 2025 at 7:48 PM, Oláh András : @Majláth Martin még egy pár perc türelem amíg az agv kiviszi a géphez April 14, 2025 at 7:49 PM, Majláth Martin : Rendben köszi! April 14, 2025 at 8:27 PM, Hári Zoltàn : Szevasztok! Gyertek légyszi a katód roll raktárhoz! Nem tudjuk beküldeni a rollt! Köszi! April 14, 2025 at 8:27 PM, Oláh András : Megyünk April 14, 2025 at 9:29 PM, Somoskövy Martin : Sziasztok. Anode Press 2-re nem jön anyag. Ránéznétek? Köszönöm. April 14, 2025 at 9:32 PM, Shahbaz 샤바즈 MCS/RTD : Currently no lot available for Anode press #02 April 14, 2025 at 10:53 PM, Oláh András : @Shahbaz 샤바즈 MCS/RTD please check order for E1SLA020_P01 April 14, 2025 at 10:55 PM, Shahbaz 샤바즈 MCS/RTD : LR received but currently no lot available. April 14, 2025 at 10:56 PM, Oláh András : @Csicskovics Balázs ezek szerint nincs hozzá anyag April 14, 2025 at 11:02 PM, Csicskovics Balázs : Ok April 15, 2025 at 1:01 AM April 15, 2025 at 1:01 AM, Hári Zoltàn : Sziasztok, segitséget szeretnénk kérni a katód jumbo raktárba. Köszi April 15, 2025 at 1:01 AM, Oláh András : Megyünk April 15, 2025 at 1:01 AM, Kiss Balázs F.A. : Megyünk April 15, 2025 at 1:05 AM, Kiss Balázs F.A. : Kész April 15, 2025 at 1:56 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Roll stk C32 “MCP Safety power relay off” Thanks. April 15, 2025 at 1:57 AM, Oláh András : Checking April 15, 2025 at 2:03 AM, Oláh András : Solved April 15, 2025 at 10:23 AM, Yanina : Sziasztok, Anód slitt 2 nem jó transzfer R/w April 15, 2025 at 10:24 AM, Simon Attila F. A. : Megyünk. April 15, 2025 at 1:18 PM, Shakir (MCS) : @FA @Simon Attila F. A. Please check E0STKA35_M01, Data_off, sensor on overtime. Thank you April 15, 2025 at 1:19 PM, Simon Attila F. A. : Yes, I an here... April 15, 2025 at 1:19 PM, Simon Attila F. A. : New guys try use the warehouse... April 15, 2025 at 1:20 PM, Shakir (MCS) : Thank you for your information April 15, 2025 at 6:12 PM, Somoskövy Martin : Sziasztok. Anode Press 6 mögött kiállt egy AGV hibára. Megnéznétek? Köszönöm. April 15, 2025 at 6:12 PM, Oláh András : Megyünk April 15, 2025 at 6:20 PM, Mr.Miti (미티) FA : Kész April 15, 2025 at 6:20 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "D" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Szabadi Miklós Oláh András ———————————— Assembly(6+1): Zsurbej Zsolt Novák Károly Novák Zoltán Kovács Szabolcs Kasztel Balázs Nagy Zsolt ———————————— Formation/Modul(3): Magyar Balázs Nagy Gábor Martina Dávid ———————————— April 15, 2025 at 7:26 PM, Rudyi Volodymyr : Sziasztok, segitséget szeretnénk kérni a katód jumbo raktárba. Köszi April 15, 2025 at 7:27 PM, adambenczik : Megyek April 15, 2025 at 7:32 PM, Csicskovics Balázs : Cathode slitt 2re 30 perce nem jön az AGV! Ránéznétek kérlek?! Köszönöm April 15, 2025 at 7:34 PM, adambenczik : @MCS please check April 15, 2025 at 7:38 PM, VK (mcs) : There is no available material April 15, 2025 at 8:17 PM, Hári Zoltàn : Szevasztok! Technikust kernek a katod 2 es roll raktarhoz. Nem tudjuk bekuldeni a jumbot. Koszi! April 15, 2025 at 8:24 PM, Szabadi Miki : Mindjárt megyünk April 15, 2025 at 8:29 PM, adambenczik : Kész April 15, 2025 at 8:29 PM, Hári Zoltàn : Koszi! April 15, 2025 at 10:35 PM, 배병민 (Bae Byoungmin) : To Electrode shift leader Please share with the FA team when the production of the Anode for the 1line cotter of electrodes begins. Thank you April 15, 2025 at 11:12 PM, Horváth Attila : Sziasztok. Segítséget szeretnék kérni anod roll raktárba April 15, 2025 at 11:13 PM, Oláh András : Megyünk April 15, 2025 at 11:52 PM, Horváth Attila : Segítséget szeretnék fólia raktárhoz. April 15, 2025 at 11:53 PM, Szabadi Miki : Megyünk April 16, 2025 at 2:04 AM April 16, 2025 at 2:04 AM, Farkas Dániel Elekt : Sziasztok Por katodon megallt az agv Nezzetek meg legyszives April 16, 2025 at 2:11 AM, Oláh András : Rendben megyünk April 16, 2025 at 2:12 AM, Farkas Dániel Elekt : Koszi April 16, 2025 at 2:56 AM, Farkas Dániel Elekt : Por katodon ismet problema van Gyertek legyszives April 16, 2025 at 2:56 AM, Szabadi Miki : Okés megyünk April 16, 2025 at 3:10 AM, Farkas Dániel Elekt : Koszi April 16, 2025 at 3:32 AM, Csicskovics Balázs : Cathode slitt 2 elakadt egy tálca, gyertek légyszíves Köszönöm April 16, 2025 at 3:33 AM, adambenczik : Megyek April 16, 2025 at 3:42 AM, adambenczik : Kész April 16, 2025 at 3:56 AM, adambenczik : Katód press 2 mögött egy raklap sárga bobin útban van az AGVknek, mert pont ott fordulnak. Valaki ide tudna jönni békával, betenni teljesen a falig, légyszives? Köszönöm April 16, 2025 at 4:33 AM, Csicskovics Balázs : Cathode slitt 3 elakadtak a tálcák. Gyertek légyszíves Köszönöm April 16, 2025 at 4:36 AM, Szabadi Miki : Megyünk April 16, 2025 at 5:13 AM, Rudyi Volodymyr : Problémák vannak az AGV-vel a katódraktárban April 16, 2025 at 5:13 AM, Szabadi Miki : Megyünk April 16, 2025 at 6:00 AM, Pintér Gábor : Sziasztok katód 2 coatingon megállt az AGV April 16, 2025 at 6:01 AM, Pintér Gábor : Szeretnénk segítséget kérni April 16, 2025 at 6:13 AM, Czeilinger Krisztián : Kész. April 16, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(2): Boromisza Zoltán, Pintye Miklós Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Rácz Dániel --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 16, 2025 at 6:35 AM, Mohammad Amir : @FA @Böröcz Tamás Please check E0STKC31_C01 there is MCP safety relay off error. Thank you! April 16, 2025 at 6:37 AM, Czeilinger Krisztián : Going April 16, 2025 at 6:39 AM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert C32 is hibában áll. valószínűleg roszzúl zárták az ajtót az operátorok, vagy belelógtak egy fényfüggönybe April 16, 2025 at 6:45 AM, Czeilinger Krisztián : @Szücs Géza FT-B nézzük. April 16, 2025 at 6:55 AM, Czeilinger Krisztián : Solved. April 16, 2025 at 6:55 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 7:38 AM, Anton Mashchenko : Hello, cathode press 4, AGV not coming 10 min! Help! April 16, 2025 at 7:38 AM, Mohammad Amir : Checking April 16, 2025 at 7:39 AM, Mohammad Amir : Are you referring to P01 port or P02 port? April 16, 2025 at 7:41 AM, Mohammad Amir : For P02 (R/W)there is a job to unload however currently E1PRC040_P02 is OOS that's why AGV does not come. @FA @Czeilinger Krisztián please check P02_E1PRC040. Thank you very much! April 16, 2025 at 7:42 AM, Mohammad Amir : For P01_E1PRC040_P01 ,we did not receive Load request in recent times,if you need materials please press LR. Thank you very much! April 16, 2025 at 7:43 AM, Böröcz Tamás : P02 is in service April 16, 2025 at 7:43 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 7:44 AM, Mohammad Amir : For you information, AGV#7 has assigned now. Thank you! April 16, 2025 at 7:48 AM, Mohammad Amir : @FA @Böröcz Tamás Could you please check E0CNVC51 _053/52 it is OOS and blocking materials recovery. Thank you! April 16, 2025 at 7:51 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 16 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 16, 2025 at 8:09 AM, Mohammad Amir : @FA @Czeilinger Krisztián Please check and take action these two ports are Manual status that's why it is OOS and eventually there is queue of recovery materials on the CNVC51. Thank you very much! April 16, 2025 at 9:58 AM, Mohammad Amir : @FA @Böröcz Tamás Please check E0STKA35_C01 there eis light curtain detected error and it is blocking one job to be completed. Thank you! April 16, 2025 at 9:58 AM, Czeilinger Krisztián : Going. April 16, 2025 at 9:59 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 10:04 AM, Czeilinger Krisztián : Solved. April 16, 2025 at 10:04 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 11:17 AM, Szarka Adrián : Sziasztok Anod 4 roll raktár rossz ajtó nyitás miatt megállt. Tudnátok segíteni ? Köszönöm April 16, 2025 at 11:26 AM, Anton Mashchenko : Cathode press 4, AGV not coming 10 min! Help! Thanks! April 16, 2025 at 11:27 AM, Mohammad Amir : Checking April 16, 2025 at 11:28 AM, Mohammad Amir : If you want materials at E1PRC040_P01 , please press LR last LR received at 10:53 and job has been completed for it. Thank you very much! April 16, 2025 at 11:28 AM, Mohammad Amir : Checking for P02 port. April 16, 2025 at 11:28 AM, Böröcz Tamás : Agv 9 is on the way April 16, 2025 at 11:30 AM, Mohammad Amir : Yes AGV#9 has assigned at 11:17 but is is not moving could you please check AGv#14. It is blocking the AGV#9 and that's why there is a delay. Thank you! April 16, 2025 at 11:31 AM, Böröcz Tamás : I did a restart on agv 1 April 16, 2025 at 11:31 AM, Böröcz Tamás : It was stopped without any alarm April 16, 2025 at 1:13 PM, Anton Mashchenko : Cathode press 3, AGV not coming 20 min! Help! April 16, 2025 at 1:14 PM, Sazzad Bhai SKon : We don't receive LR April 16, 2025 at 1:18 PM, Anton Mashchenko : The press operator pressed LR because the roll is currently waiting for the AGV April 16, 2025 at 1:20 PM, Mohammad Amir : Please press again ,we didn't receive it yet. Thank you! April 16, 2025 at 1:22 PM, Anton Mashchenko : I can't press it again because we are in AGV standby mode April 16, 2025 at 1:22 PM, Anton Mashchenko : This message was deleted. April 16, 2025 at 1:23 PM, Anton Mashchenko : I can't click twice April 16, 2025 at 1:24 PM, Mohammad Amir : Actually we didn't receive LR in recent time ,Last LR was received at 12:55 and for this Job has already been completed at 13:10. Afate that there is no LR received that's why AGV is not coming for E1PRC030_P01. Please confirm are you referring to E1PRC030_P01 or P02 port ? April 16, 2025 at 1:24 PM, Anton Mashchenko : AGV 13 has arrived, thank you! April 16, 2025 at 1:26 PM, Mohammad Amir : Yes for E1PRC030_P02 ,we received Unload request (UR) and AGV#13 has assigned at 13:24. But for E1PRC030_P01 ,we didn't received Load request (LR). Thank you very much! April 16, 2025 at 1:40 PM, Anton Mashchenko : Cathode press 4, AGV not coming also, 15 min… Help :) port P02 April 16, 2025 at 1:41 PM, Sazzad Bhai SKon : UR received at 13:35. Job created, Agv on the way April 16, 2025 at 1:42 PM, Anton Mashchenko : Thank you! April 16, 2025 at 1:49 PM, Sazzad Bhai SKon : @양원석 Hello PM, ACS got the job for cathode 4line press (RBC3436). Transfer reply was okay (HCACK) But several AGV has been assigned and unassigned for this job. E0JGVC01_VC05, VC12, VC16, again VC12 . Could you please check the reason. Thank you April 16, 2025 at 2:10 PM, Anton Mashchenko : The AGV never arrived April 16, 2025 at 2:12 PM, Sazzad Bhai SKon : @이철훈_CIM_SKCC hello manager, could you please check the reason. Thank you April 16, 2025 at 2:13 PM, Sazzad Bhai SKon : ACS received the job and HCACK reply was okay (4). But AGV is not transferring. We made an enquiry April 16, 2025 at 2:59 PM, Szarka Adrián : Katod roll raktárban a 2 Ben le szakadt az ajtó. Az új zsanérok el törtek April 16, 2025 at 3:14 PM, Czeilinger Krisztián : Itt vagyunk a tett színhelyén. April 16, 2025 at 3:38 PM, Anton Mashchenko : Cathode press 4, AGV also not coming 10 min! Help! April 16, 2025 at 3:38 PM, Mohammad Amir : Checking! Is it P01 pr P02? April 16, 2025 at 3:39 PM, Anton Mashchenko : P02 April 16, 2025 at 3:41 PM, Mohammad Amir : For this Port P02, AGV#13 has assigned at 15:38. I am monitoring. Thank you! April 16, 2025 at 3:41 PM, Anton Mashchenko : Thank you! April 16, 2025 at 3:42 PM, Mohammad Amir : You are welcome! April 16, 2025 at 3:47 PM, Mohammad Amir : AGV#13 has successfully picked the materials from the Port P02_Press Cathode -4 and departed to its destination warehouse STKC34 at 15:46. ✅ Thank you very much! April 16, 2025 at 4:13 PM, 이철훈_CIM_SKCC : 확인결과 segment(2299-2356)를 막아 놓아서 agv의 수행이 원활히 진행되지 않은 것으로 확인하였습니다. 우선 막힌 segment는 풀어 놓겠습니다. April 16, 2025 at 4:13 PM, 이철훈_CIM_SKCC : Photo April 16, 2025 at 4:18 PM, Anton Mashchenko : Cathode press 3, AGV not coming April 16, 2025 at 4:18 PM, Anton Mashchenko : P02 April 16, 2025 at 4:18 PM, Mohammad Amir : Checking April 16, 2025 at 4:21 PM, Mohammad Amir : AGV#16 now on the way ✅. Monitoring further. Thank you very much! April 16, 2025 at 4:21 PM, Anton Mashchenko : Thank you! April 16, 2025 at 4:21 PM, Mohammad Amir : You are welcome! April 16, 2025 at 4:33 PM, Mohammad Amir : Update :- Job has been completed successfully for RBC3439 and it has successfully stored in E0STKC33(0100306) at 16:32. ✅ Thank you! April 16, 2025 at 6:13 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 16, 2025 at 6:45 PM, Kurgya Attila : Sziasztok Coatingon anod 1en agv-ket szeretnénk használni. Ehhez kérnénk a támogatást. Gyertek is légyszi mert már el is akadt egy agv. Köszönöm April 16, 2025 at 6:47 PM, Mr.Miti (미티) FA : Megyünk megyünk April 16, 2025 at 6:58 PM, KIM SEYEON [김세연]_FA : Photo April 16, 2025 at 6:59 PM, KIM SEYEON [김세연]_FA : @한동석 요 카톡방에 올려주시면 감사하겠습니다. 요 카톡방이 공식적인 코프슬 자동화 관련 카톡방입니다. April 16, 2025 at 7:00 PM, 서지원 : 음극 코팅 1라인 금일 슬러리 점도 하락으로 인해 리와인더 오실레이션 기능 사용중입니다. 금일 야간동안은 agv사용 불가능할것으로 판단됩니다. April 16, 2025 at 8:52 PM, Csicskovics Balázs : Sziasztok Cathode press 1 R/W robot megállt. Valaki jöjjön. Köszönöm April 16, 2025 at 9:10 PM, adambenczik : Kész April 16, 2025 at 9:36 PM, Csicskovics Balázs : Sajnos megint! 😢😢😢 April 16, 2025 at 10:10 PM, adambenczik : Kész. Mostmár elvileg jó lesz April 17, 2025 at 1:35 AM April 17, 2025 at 1:35 AM, Oleksii Krasnoshchok : Hello in anode press 1, 2 doesn't come Agv on u/w we waiting 30 minutes April 17, 2025 at 1:35 AM, Mr.Miti (미티) FA : Nézem April 17, 2025 at 1:37 AM, VK (mcs) : @FA Please check Anode roll STM A31 Auto port is OoS. April 17, 2025 at 1:37 AM, VK (mcs) : STK* April 17, 2025 at 1:40 AM, adambenczik : Solved April 17, 2025 at 2:49 AM, Csicskovics Balázs : Anode slitt 1-2 nem jönnek az üres tálcák! April 17, 2025 at 2:50 AM, Csicskovics Balázs : Légyszíves nézzétek meg! Köszönöm April 17, 2025 at 3:02 AM, VK (mcs) : STK was out of service and now it has many orders, April 17, 2025 at 5:13 AM, Csicskovics Balázs : Anode slitt 3 elakadt a tálca a conveyoron. Köszönöm April 17, 2025 at 5:15 AM, gutenkunstabelzoltan : Pontosan hol? April 17, 2025 at 5:16 AM, Csicskovics Balázs : Leszedőkarnál April 17, 2025 at 5:19 AM, gutenkunstabelzoltan : Kesz April 17, 2025 at 5:38 AM, VK (mcs) : @FA Please check Anode conveyor E0CNVA51 port (6028) Data mismatch error! April 17, 2025 at 6:08 AM, Nagy Dávid 4 : Anod press 2 U/W a 10-es számú agv kiált hibára help help köszönöm szépen April 17, 2025 at 6:14 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 8/12 Tech, 1Sl Overtime(0): Holiday(2): Csanálosi Gábor, Pintye Miklós Sick(1): Gerbovits Kevin, kovács Ágnes --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Rácz Dániel, Böröcz Zamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 17, 2025 at 6:18 AM, Shakir (MCS) : @FA @Pálosi Róbert Please check Anode conveyor E0CNVA51 port (6028) Data mismatch error! April 17, 2025 at 6:25 AM, Szücs Géza FT-B : úton April 17, 2025 at 6:25 AM, Szarka Adrián : Sziasztok anod Press 1 gep előtt a 10 agv menet közben úgy gondolta hogy meg áll hibával April 17, 2025 at 6:25 AM, Szarka Adrián : Mögötte meg a 7 számú agv ki ment a fel jelölt területről és meg állt hibával April 17, 2025 at 6:26 AM, Szarka Adrián : Gyertek kerlek nézzetek meg köszönöm April 17, 2025 at 6:28 AM, Czeilinger Krisztián : Going. April 17, 2025 at 6:28 AM, Szarka Adrián : Anod Slitten nincs reel tálca. April 17, 2025 at 6:29 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 17 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 17, 2025 at 6:30 AM, Shakir (MCS) : Also please check AGV 10 AN blcoking 2 other agvs, Job getting delayed Error : Go step error AGV10 AN Thank you April 17, 2025 at 6:31 AM, Shakir (MCS) : Because of Anode conveyor E0CNVA51 port (6028) Data mismatch error! @FA checking Thank you April 17, 2025 at 6:46 AM, duzzaman Md (MCS) : @FA Please solve this one ASAP. Several jobs are getting delayed. Thanks! April 17, 2025 at 6:50 AM, Szarka Adrián : kell FA-s kollèga mert meghalt az 1 raktárban a daru mert elakadt a fólia April 17, 2025 at 6:50 AM, Szarka Adrián : Kerlek nézzetek meg köszönöm April 17, 2025 at 6:50 AM, Czeilinger Krisztián : Nemsokára megyünk. April 17, 2025 at 6:51 AM, Böröcz Tamás : Számunkra is kéne egy két FAs kolléga April 17, 2025 at 6:53 AM, Szarka Adrián : Azt el hiszem. De ez ilyen sajnos, mi is ezer éve egyedül vagyunk ( Sl ) 😢😢😢 April 17, 2025 at 6:53 AM, Böröcz Tamás : Akkor értitek 😅 marad a kispálya April 17, 2025 at 6:55 AM, Böröcz Tamás : Amúgy majdnem egy hónapig ketten voltak 🫣 April 17, 2025 at 6:55 AM, Shakir (MCS) : @Czeilinger Krisztián @FA Please check Anode conveyor E0CNVA51 port (6027) is OOS. Reel tray delivery getting delayed. Thank you April 17, 2025 at 7:01 AM, duzzaman Md (MCS) : @FA Kindly check E0STKC51_C01, Its one Load ibersize error since 06:39 Thanks April 17, 2025 at 7:02 AM, Shakir (MCS) : *Load oversize error April 17, 2025 at 7:04 AM, Böröcz Tamás : It's 40 minutes on feet because we have to walk around the building. And there are 8 technician for the whole company. Thanks for your patience April 17, 2025 at 7:06 AM, duzzaman Md (MCS) : I appreciate it immensely. I am deeply grateful for your extensive effort. April 17, 2025 at 7:12 AM, Czeilinger Krisztián : Solved. April 17, 2025 at 7:13 AM, Shakir (MCS) : Reel tray delivery has been normalized now ✅ Thank you @Czeilinger Krisztián April 17, 2025 at 7:35 AM, Pintér Gábor : Anód jumbo stocker 2nél nem mukodik a scanner April 17, 2025 at 8:04 AM, Pálosi Róbert : Újra lett indítva April 17, 2025 at 8:09 AM, duzzaman Md (MCS) : @Böröcz Tamás Kindly take care of the Data off, Sensor On overtime error at E0STKA35_M01, It occurred at 7:50 Thank you April 17, 2025 at 8:21 AM, Pálosi Róbert : Hali Tomi! Áttudnál jönni egy kicsit az An 32 - re? Scenner ügyben! 😁 April 17, 2025 at 9:22 AM, 김대호 (Kim Dae Ho) : Anode sliter 1 help April 17, 2025 at 9:23 AM, 김대호 (Kim Dae Ho) : @fa April 17, 2025 at 9:23 AM, Shakir (MCS) : @FA @Czeilinger Krisztián Please check E0CNVA_06_131 is OOS. Job getting delayed Thank you April 17, 2025 at 9:26 AM, Szücs Géza FT-B : minden területen, mindenki türelmét szeretném kérni. A technikusi létszám a mai napon rendkívül alacsony. minden szintre csak 2 technikus van. April 17, 2025 at 9:26 AM, Shakir (MCS) : *E0CNVA51_06_131 April 17, 2025 at 9:29 AM, Shakir (MCS) : Issue has been resolved now ✅ Carrier started to move Thank you April 17, 2025 at 9:32 AM, 김대호 (Kim Dae Ho) : Thank you April 17, 2025 at 9:32 AM, Shakir (MCS) : You’re welcome April 17, 2025 at 10:14 AM, Szarka Adrián : Sziasztok anod slitten a konvejor megállt gyertek megnézni kerlek April 17, 2025 at 10:21 AM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert légyszi nézzen rá valamelyikőtök April 17, 2025 at 10:26 AM, Pálosi Róbert : Nézzük April 17, 2025 at 10:43 AM, Pálosi Róbert : Már megy April 17, 2025 at 10:43 AM, Szarka Adrián : Katod roll raktárban meg állt egy agv gyertek kerlek köszi April 17, 2025 at 10:48 AM, Pálosi Róbert : Kész April 17, 2025 at 12:26 PM, Szücs Géza FT-B : AN oldali Roll ellátásban némi késés lesz tapasztalható a Roll raktárak előtti operátori munkavégzés miatt. April 17, 2025 at 1:07 PM, Shakir (MCS) : @Czeilinger Krisztián @FA Please port E0STKC32_P01 is OOS, Port having carrier RBC3001 for Press3 is getting delayed. Thank you April 17, 2025 at 1:14 PM, Shakir (MCS) : @Fa Please check AGV#02 AN, Bumper alarm. Thank you April 17, 2025 at 1:34 PM, 배병민 (Bae Byoungmin) : @전극 제조 프레스 AGV 이동구간에서 Roll 스크랩 작업으로 반송에 문제가 있습니다. 최근들어 계속되는 문제로 확인 부탁드립니다. 임시로 제가 치워뒀습니다 April 17, 2025 at 1:38 PM, Anton Mashchenko : Hello, cathode press 3, AGV not coming 10 min! Help! P01! Thanks! April 17, 2025 at 1:39 PM, Shakir (MCS) : Checking April 17, 2025 at 1:42 PM, Shakir (MCS) : AGV# 16 assigned ✅ Carrier on the way Thank you April 17, 2025 at 1:42 PM, 김대호 (Kim Dae Ho) : 네 확인하고 작업자들에게 전달하겠습니다. April 17, 2025 at 1:43 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 April 17, 2025 at 1:48 PM, Shakir (MCS) : Job has been completed successfully for press3 CA✅ Thank you! April 17, 2025 at 4:09 PM, Szarka Adrián : Sziasztok Anod konvejor meg állt nézzetek meg kerlek April 17, 2025 at 4:15 PM, Böröcz Tamás : Szia 10 perce elindult már csak messze van a vége April 17, 2025 at 5:15 PM, Nagy Dávid 4 : Anod press 2 R/W robot probléma és a 18 számú agv kiált hibára help help köszönöm szépen April 17, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician, 1 Sl, ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 7:37 PM, Karina Lyzanets : Sziasztok! Gyertek az Slitt Anode 3 re légyszíves April 17, 2025 at 7:37 PM, Karina Lyzanets : Köszönöm April 17, 2025 at 7:38 PM, Mr.Miti (미티) FA : Oke April 17, 2025 at 7:42 PM, Mr.Miti (미티) FA : Solved April 17, 2025 at 7:51 PM, Karina Lyzanets : Slitt Cathode 3 megállt a robot U/W April 17, 2025 at 7:52 PM, Karina Lyzanets : Köszi! April 17, 2025 at 7:53 PM, Mr.Miti (미티) FA : Megyek April 17, 2025 at 7:55 PM, Mr.Miti (미티) FA : Solved April 17, 2025 at 9:18 PM, Mr.Miti (미티) FA : AN slitt. Trays moving, just slow. April 17, 2025 at 9:24 PM, Shahbaz 샤바즈 MCS/RTD : LTA1040 at CNVA51_1634 not moving for a longer time. Please check. April 17, 2025 at 9:24 PM, Mr.Miti (미티) FA : Im on it! April 17, 2025 at 9:28 PM, Mr.Miti (미티) FA : Solved! April 17, 2025 at 11:52 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Mr.Miti (미티) FA LTA1000 at CNVA51_0608 is not moving for a long time. Please check. April 17, 2025 at 11:52 PM, Mr.Miti (미티) FA : Cheking April 17, 2025 at 11:59 PM, Mr.Miti (미티) FA : Solved April 18, 2025 at 5:57 AM April 18, 2025 at 5:57 AM, K.Krisz Coating : Hali! An 1 elakadt az AGV a 2 r/w-nél April 18, 2025 at 5:58 AM, K.Krisz Coating : Sos April 18, 2025 at 5:58 AM, Viczai Tamás : Megyek April 18, 2025 at 6:26 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 18 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 18, 2025 at 7:42 AM, Yanina : Sziasztok, Cathode slitt 2 nem jó tray id April 18, 2025 at 7:42 AM, Yanina : R/W 2 April 18, 2025 at 7:55 AM, Simon Attila F. A. : Kész. April 18, 2025 at 8:00 AM, Yanina : Köszönöm April 18, 2025 at 8:01 AM, Simon Attila F. A. : @Shakir (MCS) Good morning! The trays are coming very slowly to slitter conveyor. There are 3 machines running. Is there any way to speed it up? April 18, 2025 at 8:02 AM, Shakir (MCS) : Checking April 18, 2025 at 8:08 AM, Shakir (MCS) : There is several jobs in SCS crane are busy that’s why trays coming slowly. The way speed up the tray delivery to increase the priority of carriers. Thank you April 18, 2025 at 8:16 AM, Shakir (MCS) : There are several jobs exist to P07, and some trays on CNV, on the way. We monitoring further Thank you April 18, 2025 at 8:16 AM, Simon Attila F. A. : Thank you! April 18, 2025 at 8:16 AM, Shakir (MCS) : You’re welcome April 18, 2025 at 8:27 AM, Shakir (MCS) : Now the conveyor anode side is full, trays are available for slitter now ✅ Issue has been resolved Thank you April 18, 2025 at 8:28 AM, Simon Attila F. A. : Thank you so much! April 18, 2025 at 8:54 AM, 조혜근 : @FA MC POWER ON of RW Lee Jae-gi of anode press unit 2 is not possible. Please check it out. April 18, 2025 at 9:06 AM, Simon Attila F. A. : Solved. April 18, 2025 at 10:23 AM, 배병민 (Bae Byoungmin) : @배일명 대리님 안녕하세요 코터 음극 1라인 RW#2 AGV 점검 완료되었습니다. AGV 자동 생산 가능하오니 참고 부탁드립니다. April 18, 2025 at 11:28 AM, 배일명 : 이제 확인했습니다 모노펌프 교체로 평균로딩이낮아져 확인후 현재부터 음1 연속생산예정입니다 April 18, 2025 at 11:35 AM, 배병민 (Bae Byoungmin) : 넵 April 18, 2025 at 1:11 PM, na1tis : Hello, Press Cathode 1, problem R/w "Card2-03 Auto Start Position Abnormal", Help me please April 18, 2025 at 1:11 PM, Viczai Tamás : Megyünk April 18, 2025 at 3:22 PM, Simon Attila F. A. : 1. Coater 1L RW 1st 2. 15:09 UR requested 3. 15:13 AGV #20 Delivery 4. Error name: None 1. Coater 1L RW 2nd 2. 15:09 UR requested 3. 15:17 AGV #02 Delivery 4. Error name: RETRY 2 April 18, 2025 at 3:25 PM, Simon Attila F. A. : This is anode side. April 18, 2025 at 4:17 PM, Simon Attila F. A. : 1. Coater 1L RW 1st 2. 16:11 UR requested 3. 16:15 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 16:09 UR requested 3. 16:16 AGV #16 Delivery 4. Error name: RETRY 4 April 18, 2025 at 4:46 PM, Simon Attila F. A. : 1. Coater 1L RW 1st 2. 16:35UR requested 3. 16:44 AGV #20 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 16:35 UR requested 3. 16:44 AGV #16 Delivery 4. Error name: RETRY 4 April 18, 2025 at 5:12 PM, Simon Attila F. A. : 1. Coater 1L RW 1st 2. 17:04 UR requested 3. 17:12 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 17:01 UR requested 3. 17:11 AGV #20 Delivery 4. Error name: RETRY 4 April 18, 2025 at 5:28 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Roll stk C31, Light curtain detect error. Thanks April 18, 2025 at 5:35 PM, Simon Attila F. A. : 1. Coater 1L RW 1st 2. 17:27 UR requested 3. 17:33 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 17:26 UR requested 3. 17:35 AGV #20 Delivery 4. Error name: RETRY 4 April 18, 2025 at 5:51 PM, Hári Zoltàn : Szevasztok! Gyertek legyszi a katod 1 re! Az 1-es rewinderen nem teszi rá a bufferről az agvre a jumbót. Az agv ott áll alatta. Köszi! April 18, 2025 at 5:54 PM, 김태현 : @FA 양극1라인 AGV봐주세요 April 18, 2025 at 5:54 PM, Hári Zoltàn : A 2-es rewinderen is ugyan ez van. April 18, 2025 at 5:55 PM, Szabadi Miki : Megyünk April 18, 2025 at 6:00 PM, 배병민 (Bae Byoungmin) : 안녕하세요 이반차FA 배병민PM입니다. 장기비가동 라인은 첫투입 생산시 AGV 자동은 사전 공유 부탁드립니다. 제가 지금 가는 중입니다 April 18, 2025 at 6:02 PM, 김태현 : 네 알겠습니다 April 18, 2025 at 6:03 PM, 김지수PM(Gyuri)_FA : AGVs can be operated after 6:30pm in coating side, thanks in advance April 18, 2025 at 6:16 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (3):Csanálosi Gábor, Nagy Tibor, Céhman Zsolt, Sick (0):- Holiday (1):- Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András, Kiss Balázs, Céhman Zsolt Assembly(8): GF: Novák Zoltán, Kovács Szabolcs, Csanálosi Gábor, Zsurbej Zsolt 1F:Nagy Zsolt, Novák Károly, Kasztel Balázs, Nagy Tibor Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 18, 2025 at 7:52 PM, Somoskövy Martin : Sziasztok. Cathode Press 2-őn ki van tiltva a buffer de mégis érkezik oda anyag. Megnéznétek? Köszönöm. April 18, 2025 at 7:53 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 2-3 nincs AGV 20 perc Kérek nézzetek meg April 18, 2025 at 7:53 PM, Karina Lyzanets : Köszönöm April 18, 2025 at 7:56 PM, Shahbaz 샤바즈 MCS/RTD : Slitter Unit # 2 AGV#13 is on the way Slitter unit#03 job was cancelled so please LR again. April 18, 2025 at 8:59 PM, Csicskovics Balázs : Cathode slitt 3 még mindig nem jön az AGV! April 18, 2025 at 9:01 PM, Shahbaz 샤바즈 MCS/RTD : Please Load request again. Thank you April 18, 2025 at 9:02 PM, Csicskovics Balázs : It's happened 3 times already. April 18, 2025 at 9:03 PM, Zulaa/졸라/Ivancsa FA invited Dariimaa/다리마/Ivancsa. April 18, 2025 at 9:03 PM, Shahbaz 샤바즈 MCS/RTD : I can see , once the job was cancelled by SCS and another by ACS 😔 April 18, 2025 at 9:05 PM, Oláh András : We working on E0STKC032 that's why late material April 18, 2025 at 9:05 PM, Csicskovics Balázs : It happened April 18, 2025 at 9:07 PM, Shahbaz 샤바즈 MCS/RTD : I hope the issue will be resolved soon. April 18, 2025 at 9:07 PM, Mr.Miti (미티) FA : @Shahbaz 샤바즈 MCS/RTD Good evening! STKC32 oos all night. April 18, 2025 at 9:08 PM, Shahbaz 샤바즈 MCS/RTD : It will be OOS tonight? April 18, 2025 at 9:08 PM, 방혁 PM(Bang.Hyuk) FA : Yes April 18, 2025 at 9:08 PM, Mr.Miti (미티) FA : Could you redirect all the material that the system would bring from STK 2 to STK 3? April 18, 2025 at 9:09 PM, Shahbaz 샤바즈 MCS/RTD : Should I make the C32 OOS in MCS so it will be automatically redirected? April 18, 2025 at 9:09 PM, Mr.Miti (미티) FA : Maybe April 18, 2025 at 9:09 PM, Csicskovics Balázs : Cathode press 2 AGV probléma. Gyertek légyszíves Köszönöm April 18, 2025 at 9:09 PM, Mr.Miti (미티) FA : Jövök April 18, 2025 at 9:11 PM, Shahbaz 샤바즈 MCS/RTD : I set it OOS, please let us now when it is fixed. Thank you. April 18, 2025 at 9:12 PM, Mr.Miti (미티) FA : Okay! Thank you very much! April 18, 2025 at 9:13 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome. April 18, 2025 at 9:25 PM, Shahbaz 샤바즈 MCS/RTD : Now AGV#12 is on the way to slit # 03. April 18, 2025 at 9:25 PM, Mr.Miti (미티) FA : Yes yes I see! Thank you! April 18, 2025 at 10:48 PM, Mr.Miti (미티) FA : STKA32 problem solved. April 18, 2025 at 10:49 PM, Shahbaz 샤바즈 MCS/RTD : You mean STKC32? April 18, 2025 at 10:49 PM, Mr.Miti (미티) FA : Yes. Sorry April 18, 2025 at 10:50 PM, Shahbaz 샤바즈 MCS/RTD : Okay, I updated the MCS state as well. Thank you. April 18, 2025 at 10:50 PM, Mr.Miti (미티) FA : Thank you very much! April 18, 2025 at 10:51 PM, Rudyi Volodymyr : Foil warehouse E0STK001 is not working April 18, 2025 at 10:52 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Foil STK001 “SCP main power CP Trip. Thanks April 18, 2025 at 10:53 PM, Szabadi Miki : Solved April 18, 2025 at 11:35 PM, Karina Lyzanets : Gyertek légyszíves valaki az Slitt Cathode 3 mellet megállt AGV robot April 18, 2025 at 11:35 PM, Karina Lyzanets : Köszönöm szépen April 18, 2025 at 11:35 PM, Oláh András : Megyünk April 19, 2025 at 12:36 AM April 19, 2025 at 12:36 AM, Hári Zoltàn : Gyertek legyszi a foliraktarhoz. Ujra kene inditani darut! Köszi! April 19, 2025 at 12:36 AM, Mr.Miti (미티) FA : Megyek April 19, 2025 at 12:40 AM, Mr.Miti (미티) FA : Újra indítva. April 19, 2025 at 1:00 AM, Csicskovics Balázs : Cathode press 1 U/W transfer probléma. Gyertek légyszíves Köszönöm April 19, 2025 at 1:01 AM, Mr.Miti (미티) FA : Úton April 19, 2025 at 1:04 AM, Mr.Miti (미티) FA : Kész is April 19, 2025 at 1:06 AM, Csicskovics Balázs : Köszönöm April 19, 2025 at 2:50 AM, Hári Zoltàn : Gyertek legyszi anod 1 coaterre! Köszi Unloader nincs home pozicioban April 19, 2025 at 2:50 AM, Kiss Balázs F.A. : Megyünk April 19, 2025 at 2:50 AM, Hári Zoltàn : Az 1-es rw-n April 19, 2025 at 2:50 AM, Mr.Miti (미티) FA : Megyünk April 19, 2025 at 2:58 AM, Mr.Miti (미티) FA : Kész is April 19, 2025 at 3:07 AM, Karina Lyzanets : Slitt Cathode 2-3 megállt konvejor April 19, 2025 at 3:08 AM, Mr.Miti (미티) FA : Jövök April 19, 2025 at 3:23 AM, Karina Lyzanets : Slitt Cathode 2 nincs AGV 20 perc April 19, 2025 at 3:24 AM, Karina Lyzanets : Kérek nézzetek meg, köszönöm April 19, 2025 at 3:24 AM, Karina Lyzanets : Bocsi, 40 perc April 19, 2025 at 3:26 AM, Oláh András : @Shahbaz 샤바즈 MCS/RTD pls check order for E1SLC020 April 19, 2025 at 3:28 AM, Shahbaz 샤바즈 MCS/RTD : Currently no material available for unit 2. April 19, 2025 at 3:30 AM, Oláh András : Appreciate for information 🙏 April 19, 2025 at 3:38 AM, 김태현 : @FA there is an error with the cathode machine. April 19, 2025 at 3:38 AM, Oláh András : On the way April 19, 2025 at 3:39 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD Manufacturing SL checked and by MES system is there material. Canyou check me please where could be the problem April 19, 2025 at 3:39 AM, 김태현 : This message was deleted. April 19, 2025 at 3:44 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD there is no lot available for unit 2. Please can you give me any Carrier_ID so i can cross check. April 19, 2025 at 3:47 AM, Dániel Hufnágel : This message was deleted. April 19, 2025 at 3:48 AM, Dániel Hufnágel : RBC1399 for example April 19, 2025 at 3:50 AM, Dániel Hufnágel : By the MES this material is aviable but by the RTD side, we can not see that April 19, 2025 at 3:50 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD this was transferred to Slitter # 02 on 31/03/25 and there is no data in MCS/RTD. April 19, 2025 at 5:31 AM, 김태현 : @FA Please check the cathode 1 machine. April 19, 2025 at 6:40 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 6:32 UR requested 3. 6:35 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 6:32 UR requested 3. 6:39 AGV #2 Delivery 4. Error name: RETRY 3 April 19, 2025 at 6:43 AM, Czél Tamás : Sziasztok Katód Press 2-nél meghalt az egyik szekér. Kérlek nézzétek meg. Köszönöm April 19, 2025 at 7:00 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 19 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 19, 2025 at 7:14 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 7:11 UR requested 3. 7:13 AGV #16 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 7:10 UR requested , 3. 7:14 AGV #2 Delivery 4. Error name: RETRY 2 April 19, 2025 at 7:40 AM, Yon Ko/연커/ invited Zaya/ivancsa FA and Nandia FA. April 19, 2025 at 7:40 AM, Yon Ko/연커/ : . April 19, 2025 at 7:44 AM, Mohammad Amir : @FA @Simon Attila F. A. Please check E1SLA010_P01 it is OOS and because of this AGV#25 can not deliver material on this Port,AGV is Waiting for last 42 minutes. Please take action. Thank you very much! April 19, 2025 at 7:46 AM, Mohammad Amir : AGV#25 has Auto select abnormal error . Thank you very much! April 19, 2025 at 7:55 AM, Baek Hojong(백호종)FA : Solved April 19, 2025 at 7:55 AM, Mohammad Amir : Thank you very much Sir! April 19, 2025 at 7:58 AM, Mohammad Amir : Sir, Could you please also check E0STKA34_P01(3019) and 3009 ,these ports are OOS and because of this Slitter Anode -2(U/W) job are not getting completed for almost an hour. Thank you very much! April 19, 2025 at 8:05 AM, Baek Hojong(백호종)FA : Solved April 19, 2025 at 8:06 AM, Mohammad Amir : Thank you very much Sir! April 19, 2025 at 8:44 AM, Mohammad Amir : @Simon Attila F. A. @FA Please check E0STKC13_C01 there is Hoist Time over error. Thank you! April 19, 2025 at 8:46 AM, Mohammad Amir : Job for E1PLC011_P02 has been stopped because of this error. Thank you! April 19, 2025 at 8:58 AM, Simon Attila F. A. : Sorry, I am on coating today. April 19, 2025 at 8:58 AM, Mohammad Amir : Okay ,No problem! thank you very much! April 19, 2025 at 9:05 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 9:01 UR requested 3. 9:03 AGV #16 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:00 UR requested , 3. 9:05 AGV #20 Delivery 4. Error name: RETRY 2 April 19, 2025 at 9:44 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 9:30 UR requested 3. 9:32 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:30 UR requested , 3. 9:43AGV #12 Delivery 4. Error name: The agv20 after 1 try going to charge from the port (agv20 charge level 63.7%). ??? Agv12 is coming, charge level 64.4%) Retry 2 April 19, 2025 at 9:45 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 현상 확인 부탁드립니다. April 19, 2025 at 9:51 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 9:47 UR requested 3. 9:48 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:47 UR requested , 3. 9:50 AGV #11 Delivery 4. Error name: no problem April 19, 2025 at 10:05 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 10:00 UR requested 3. 10:02 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:59 UR requested , 3. 10:05 AGV #20 Delivery 4. Error name: RETRY 3 April 19, 2025 at 10:17 AM, Mohammad Amir : @FA Please check E0CNVC51_08_001 there is Port interface error 1. Thank you! April 19, 2025 at 10:18 AM, Mohammad Amir : @Skwarek Tibor please check the issue. Thank you! April 19, 2025 at 10:19 AM, Skwarek Tibor : Koreaian collegues are working there. April 19, 2025 at 10:19 AM, Mohammad Amir : Thank you very much for the information! April 19, 2025 at 10:19 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 10:16 UR requested 3. 10:17 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:16 UR requested , 3. 10:19 AGV #4 Delivery 4. Error name: no problem April 19, 2025 at 10:19 AM, Skwarek Tibor : Youre welcome. April 19, 2025 at 10:31 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 10:28 UR requested 3. 10:30 AGV #16 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:28 UR requested , 3. 10:31 AGV #12 Delivery 4. Error name: no problem April 19, 2025 at 10:48 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 10:44 UR requested 3. 10:46 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:45 UR requested , 3. 10:48 AGV #2 Delivery 4. Error name: no problem April 19, 2025 at 11:03 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 11:01 UR requested 3. 11:03 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:01 UR requested , 3. 11:03 AGV #12 Delivery 4. Error name: no problem April 19, 2025 at 11:04 AM, Oláh Rajmund : Gyertek légyszives cathode press 2 re meg állt a jumbo leszedő robot April 19, 2025 at 11:33 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 11:27 UR requested 3. 11:28 AGV #20 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:27 UR requested , 3. 11:33 AGV #2 Delivery 4. Error name: Retry 3 April 19, 2025 at 11:48 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 11:42 UR requested 3. 11:44 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:42 UR requested , 3. 11:48 AGV #11 Delivery 4. Error name: Retry 3 April 19, 2025 at 11:58 AM, Mohammad Amir : Is Korean Colleagues still working on the CNVC51 as there is shortage of empty trays. Thank you very much! April 19, 2025 at 12:00 PM, Viczai Tamás : Yes April 19, 2025 at 12:00 PM, Mohammad Amir : Thank you very much for the information! April 19, 2025 at 12:02 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 11:57 UR requested 3. 12:00 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:54 UR requested , 3. 12:02 AGV #16 Delivery 4. Error name: Retry 4 April 19, 2025 at 12:15 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 12:12 UR requested 3. 12:14 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 12:12 UR requested , 3. 12:15 AGV #4 Delivery 4. Error name: no problem April 19, 2025 at 12:26 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 12:19 UR requested 3. 12:21 AGV #20 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 12:19 UR requested , 3. 12:26 AGV #16 Delivery 4. Error name: Retry 4 April 19, 2025 at 1:21 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 13:16 UR requested 3. 13:19 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 13:16 UR requested , 3. 13:21 AGV #20 Delivery 4. Error name: Retry 2 April 19, 2025 at 1:43 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 13:39 UR requested 3. 13:40 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 13:39 UR requested , 3. 13:43 AGV #11 Delivery 4. Error name: no problem April 19, 2025 at 2:16 PM, Simon Attila F. A. : I'm taking it out of production the el gf an AGV20, because someone unscrewed the screws on the front camera cover, so the camera is not secured and is not in the right position. It is placed next to the an ct machine, turned off. April 19, 2025 at 2:23 PM, Baek Hojong(백호종)FA : Okay, I checked April 19, 2025 at 2:43 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 14:35 UR requested 3. 14:37 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 14:35 UR requested , 3. 14:43 AGV #11 Delivery 4. Error name: Retry 3 April 19, 2025 at 4:38 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 16:32 UR requested 3. 16:34 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 16:33 UR requested , 3. 16:37 AGV #4 Delivery 4. Error name: no problem April 19, 2025 at 4:57 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 16:54 UR requested 3. 16:56 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 16:54 UR requested , 3. 16:57 AGV #2 Delivery 4. Error name: no problem April 19, 2025 at 5:05 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 17:02 UR requested 3. 17:04 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 17:02 UR requested , 3. 17:05 AGV #11 Delivery 4. Error name: no problem April 19, 2025 at 5:33 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 17:28 UR requested 3. 17:29 AGV #16 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 17:27 UR requested , 3. 17:32 AGV #2 Delivery 4. Error name: Retry 3 April 19, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(5): Novák Zoltán, Kovács Szabolcs, Zsurbej Zsolt, Nagy Zsolt, , Kasztel Balázs, Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 19, 2025 at 7:18 PM, Csicskovics Balázs : Sziasztok Cathode press 2 R/W nem viszi el az AGV a rollt. Gyertek légyszíves Köszönöm April 19, 2025 at 7:18 PM, Oláh András : Jelen April 19, 2025 at 7:20 PM, Oláh András : Már viszi is 👍 April 19, 2025 at 7:30 PM, 배병민 (Bae Byoungmin) : This message was deleted. April 19, 2025 at 10:43 PM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 2 April 19, 2025 at 10:43 PM, Kiss Balázs F.A. : 👍🏻 April 19, 2025 at 10:47 PM, Oláh András : Kis türelem a raktárak most indultak újra April 19, 2025 at 10:50 PM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1 April 19, 2025 at 10:51 PM, Oláh András : Kis türelem a raktárból lassan jönnek April 19, 2025 at 10:52 PM, Kiss Balázs F.A. : 👍🏻 April 19, 2025 at 11:09 PM, Oláh András : @VK (mcs) can u send empty trays from E0STKC51 to cathode slitt? April 19, 2025 at 11:12 PM, VK (mcs) : Checking April 19, 2025 at 11:21 PM, VK (mcs) : 5 carriers has been released. April 19, 2025 at 11:22 PM, Szabadi Miki : Thank you! April 20, 2025 at 1:33 AM April 20, 2025 at 1:33 AM, Rudyi Volodymyr : Hello, the foil warehouse is broken. Thank you. April 20, 2025 at 1:34 AM, Oláh András : Comin' April 20, 2025 at 5:12 AM, Rudyi Volodymyr : Foil warehouse is broken again. Thank you. April 20, 2025 at 5:12 AM, Szabadi Miki : Solved April 20, 2025 at 6:41 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 6:37 UR requested 3. 6:39 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 6:37 UR requested , 3. 6:40 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 7:05 AM, Mohammad Amir : @Viczai Tamás Please check LTA1188 located at E0CNVA51_06_034 it is not moving and blocking empty trays delivery. Please check physically. Thank you! April 20, 2025 at 7:12 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 7:06 UR requested 3. 7:08 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 7:06 UR requested , 3. 7:12 AGV #11 Delivery 4. Error name: Retry 3 April 20, 2025 at 7:21 AM, Skwarek Tibor : Now it s ok. April 20, 2025 at 7:24 AM, Mohammad Amir : Empty trays delivery for Anode has been normalized now ✅. Thank you very much! April 20, 2025 at 7:25 AM, Skwarek Tibor : You re welcome. Thanks, for letting us know the problem. April 20, 2025 at 7:26 AM, Mohammad Amir : You are welcome! April 20, 2025 at 7:26 AM, Yon Ko/연커/ invited Amgaa FA. April 20, 2025 at 8:38 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 8:35 UR requested 3. 8:37 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 8:35 UR requested , 3. 8:38 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 9:07 AM, Simon Attila F. A. : This message was deleted. April 20, 2025 at 9:08 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 9:03 UR requested 3. 9:04 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:03 UR requested , 3. 9:07 AGV #2 Delivery 4. Error name: Retry 2 April 20, 2025 at 9:35 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 9: 31 UR requested 3. 9:32 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 9:32 UR requested , 3. 9:35 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 10:04 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 10:01 UR requested 3. 10:03 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:02 UR requested , 3. 10:04 AGV #2 Delivery 4. Error name: no problem April 20, 2025 at 10:10 AM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 10:07 UR requested 3. 10:09 AGV #16 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:07 UR requested , 3. 10:10 AGV #2 Delivery 4. Error name: no problem April 20, 2025 at 10:41 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 10:31 UR requested 3. 10:33 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 10:31 UR requested , 3. 10:40 AGV #2 Delivery 4. Error name: Retry 6 April 20, 2025 at 11:07 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 11:01 UR requested 3. 11:02 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:01 UR requested , 3. 11:07 AGV #11 Delivery 4. Error name: Retry 3 April 20, 2025 at 11:36 AM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 11:28 UR requested 3. 11:29 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:29 UR requested , 3. 11:36 AGV #2 Delivery 4. Error name: Retry 5 April 20, 2025 at 12:06 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 11:56 UR requested 3. 11:59 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 11:56 UR requested , 3. 12:05 AGV #2 Delivery 4. Error name: Retry 5 April 20, 2025 at 12:13 PM, Simon Attila F. A. : When the AGV entering CA CT L1 port 2, the AGV turns a little at the last 1 cm and the positioning is not correct due to the "T Range NG" error (for all AGVs). I tried cleaning the floor, but the problem was not solved, I had to intervene manually to prevent the line from stopping because of this. Please check this problem. April 20, 2025 at 12:54 PM, Koska Szilárd János : Sziasztok Anód press2 nél kiált hibára az agv April 20, 2025 at 12:55 PM, Skwarek Tibor : Megyünk April 20, 2025 at 1:01 PM, 배병민 (Bae Byoungmin) : Yes. I'll go and check right away. April 20, 2025 at 1:02 PM, Simon Attila F. A. : Thank you. April 20, 2025 at 1:03 PM, Simon Attila F. A. : although it currently stands at ca ct 1, with other errors. April 20, 2025 at 1:13 PM, Simon Attila F. A. : *stopped April 20, 2025 at 1:15 PM, Simon Attila F. A. : The CA CT L1 is working now. April 20, 2025 at 1:23 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 13:18 UR requested 3. 13:19 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 13:19 UR requested , 3. 13:23 AGV #2 Delivery 4. Error name: no problem April 20, 2025 at 1:51 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 13:31 UR requested 3. 13:33 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 13:32 UR requested , 3. 13:51 AGV #16 Delivery 4. Error name: Retry 5 April 20, 2025 at 1:57 PM, Mohammad Amir : @Viczai Tamás Please check E0CNVA51 (6154,6152) there is Run time Over Error. Thank you! April 20, 2025 at 2:00 PM, Viczai Tamás : Done April 20, 2025 at 2:00 PM, Mohammad Amir : Thank you very much! April 20, 2025 at 2:11 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 14:01 UR requested 3. 14:03 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 14:00 UR requested , 3. 14:11 AGV #16 Delivery 4. Error name: Retry 4 April 20, 2025 at 2:18 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 14:17 UR requested 3. 14:18 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 14:15 UR requested , 3. 14:18 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 2:21 PM, Yanina : Slitt anód 3 nincs AGV 40p April 20, 2025 at 2:21 PM, Mohammad Amir : Cheking April 20, 2025 at 2:23 PM, Mohammad Amir : @FA @Viczai Tamás Please check E0STKA34_P01(3019) and 3009 is OOS with error and it is blocking materials delivery to anode -3 slitter. Job has been created at 12:57 but not moving because of this error. Thank you very much! April 20, 2025 at 2:27 PM, Mohammad Amir : @Yanina Because of this reason AGV does not bring materials to Slitter -Anode -3. Thank you very much! April 20, 2025 at 2:30 PM, Mohammad Amir : @Yanina for you information,now issue has been resolved ✅. AGV #19 has been assigned for Slitter -3 Anode. Thank you very much! April 20, 2025 at 2:31 PM, Yanina : Köszönöm szépen) April 20, 2025 at 2:31 PM, Mohammad Amir : Szivesen! April 20, 2025 at 2:34 PM, Simon Attila F. A. : Anode 1. Coater 1L RW 1st 2. 14:27 UR requested 3. 14:28 AGV #12 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 14:27 UR requested , 3. 14:33 AGV #16 Delivery 4. Error name: Retry 2 April 20, 2025 at 2:55 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 14:46 UR requested 3. 14:48 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 14:48 UR requested , 3. 14:55 AGV #11 Delivery 4. Error name: no problem April 20, 2025 at 3:24 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 15:16 UR requested 3. 15:17 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 15:16 UR requested , 3. 15:24 AGV #4 Delivery 4. Error name: Retry 2 April 20, 2025 at 3:32 PM, Mohammad Amir : @Viczai Tamás @FA Please check E0STKC35_C01 there is light curtain error and it is blocking the transfers command to and from the the STKC35. Thank you very much! April 20, 2025 at 3:48 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 15:46 UR requested 3. 15:47 AGV #4 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 15:45 UR requested , 3. 15:48 AGV #11 Delivery 4. Error name: no problem April 20, 2025 at 4:49 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 16:45 UR requested 3. 16:47 AGV #2 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 16:46 UR requested , , 3. 16:49 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 5:16 PM, Simon Attila F. A. : Cathode 1. Coater 1L RW 1st 2. 17:14 UR requested 3. 17:16 AGV #11 Delivery 4. Error name: no problem. 1. Coater 1L RW 2nd 2. 17:14 UR requested 3. 17:16 AGV #4 Delivery 4. Error name: no problem April 20, 2025 at 6:15 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13+3 Overtime (3):Boromisza Zoltán, Csanálosi Gábor, Szűcs Géza Sick (0):- Holiday (0): Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(7): GF: Novák Károly, Kasztel Balázs, Kovács Szabolcs, Csanálosi gábor 1F: Novák Zoltán, Zsurbej Zsolt, Nagy Zsolt Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Boromisza Zoltán April 20, 2025 at 9:08 PM, Szabadi Miki : @VK (mcs) Good evening, could you delete the data visible on the E0STKA32_M01 port in MCS? (UNK20250409125323A32) the port is physically empty, SCS does not show any errors either April 20, 2025 at 9:09 PM, VK (mcs) : Done April 20, 2025 at 9:14 PM, Szabadi Miki : Thank you ! April 20, 2025 at 10:45 PM, Somoskövy Martin : Sziasztok. Cathode Press 7-8 körül takarítást szeretnénk végezni. Kitiltanátok az AGV-ket mindkét gép körül? Köszönöm. April 20, 2025 at 11:00 PM, Kiss Balázs F.A. : Elv kész April 21, 2025 at 1:09 AM April 21, 2025 at 1:09 AM, Horváth Attila : Segítséget szeretnék kérni a fólia raktárhoz April 21, 2025 at 1:13 AM, Oláh András : Megyünk April 21, 2025 at 1:16 AM, Oláh András : Kész April 21, 2025 at 1:22 AM, Hári Zoltàn : Katod 1 coaterre gyertek legyszi! April 21, 2025 at 1:22 AM, Oláh András : Már itt vagyunk April 21, 2025 at 1:27 AM, Horváth Attila : Anod 1 coatingra gyertek megállt a robot April 21, 2025 at 1:29 AM, Kiss Balázs F.A. : Megyünk majd April 21, 2025 at 1:47 AM, Dániel Hufnágel : @VK (mcs) Good evening! Can you give order to AGV11? We have to soend this material to c31 storage? April 21, 2025 at 1:50 AM, VK (mcs) : Done April 21, 2025 at 1:50 AM, Dániel Hufnágel : Thank you(thumbsup)(thumbsup)(thumbsup)(thumbsup) April 21, 2025 at 2:53 AM, Farkas Dániel Elekt : Sziasztok Porra kernenk egy kis segitseget! Koszi April 21, 2025 at 3:00 AM, Szücs Géza FT-B : @Dániel Hufnágel kis help pls, merre? fel le ki be? April 21, 2025 at 3:01 AM, Szabadi Miki : Elvileg anod oldalon airshowerben vár April 21, 2025 at 3:01 AM, Szabadi Miki : Agv April 21, 2025 at 3:01 AM, Oláh András : Megyünk oda Balázzsal April 21, 2025 at 3:03 AM, Dániel Hufnágel : Be April 21, 2025 at 3:04 AM, Szücs Géza FT-B : majdnem ott vagyok XD April 21, 2025 at 3:04 AM, Dániel Hufnágel : Akkor fel? April 21, 2025 at 3:04 AM, Oláh András : Mi is 😅 April 21, 2025 at 3:04 AM, Szücs Géza FT-B : Gyalokkkkk!?! April 21, 2025 at 3:05 AM, Kiss Balázs F.A. : 😆 April 21, 2025 at 3:08 AM, Somoskövy Martin : Anode roll raktárban 2 AGV nem fér el egymástól. Megnéznétek? Köszönöm. April 21, 2025 at 3:09 AM, Szabadi Miki : Mindjárt coatingon megnézem ahogy elviszi a rollokat aztán megyek April 21, 2025 at 3:20 AM, Szücs Géza FT-B : kész April 21, 2025 at 4:15 AM, Csicskovics Balázs : Cathode press 3 mellett a 21-es AGV lehalt. Gyertek légyszíves Köszönöm April 21, 2025 at 5:36 AM, Hári Zoltàn : Anod 1 coaterre kernek technikust April 21, 2025 at 5:36 AM, Hári Zoltàn : Aki itt van telibe vakon van. April 21, 2025 at 5:37 AM, Hári Zoltàn : Ugyan azt csinalja mint mi, n3zi ahogy ki be all az agv April 21, 2025 at 5:37 AM, Szabadi Miki : Ott is vagyunk April 21, 2025 at 5:37 AM, Hári Zoltàn : Koszi April 21, 2025 at 7:06 AM, (Unknown) : Sziasztok.Katód slitt 1 transfer probléma megnéznétek?köszönöm April 21, 2025 at 8:27 AM, adambenczik : Kész April 21, 2025 at 8:28 AM, gutenkunstabelzoltan : Elvileg jo April 21, 2025 at 8:43 AM, 조혜근 : @FA An error occurred in the crane of anode roll warehouse unit 4. Please check it April 21, 2025 at 9:16 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVC12_RTV01 Safety door error Thank you April 21, 2025 at 9:16 AM, duzzaman Md (MCS) : Sorted now. Thank you April 21, 2025 at 9:31 AM, Sárvári Márk : Fólia raktarhoz kérnénk segítséget. April 21, 2025 at 10:21 AM, duzzaman Md (MCS) : @FA KINDLY CHECK E0STKC13_C01 SCP MAIN POWER CP TRIP THANK YOU April 21, 2025 at 10:34 AM, 조혜근 : @MCS LTC0797 is currently mapped to EC1P073F4422114A, so please release it. April 21, 2025 at 10:35 AM, 조혜근 : EC1P073F4422114A is actually LTC0808 April 21, 2025 at 10:38 AM, Sazzad Bhai SKon : Could you please rack out LTC0797 (E0STKC52, 0201509) and restock? April 21, 2025 at 10:39 AM, 조혜근 : Okay April 21, 2025 at 10:50 AM, Sazzad Bhai SKon : Please rack out to any manual port. Then restock again April 21, 2025 at 10:51 AM, 조혜근 : Yes, I'm doing it, but I think I'm checking the crane. Please wait a little bit April 21, 2025 at 10:54 AM, Karina Lyzanets : Sziasztok! Nem jönnek a tálcák az Slitter Cathode 3 re Kérek nézzetek meg April 21, 2025 at 10:54 AM, Karina Lyzanets : Köszönöm szépen April 21, 2025 at 11:03 AM, cehmannzsoltcehmann : Koreai technikus kollégák dolgoznak a raktárban, azért nem érkezik tálca April 21, 2025 at 11:16 AM, duzzaman Md (MCS) : @MES Please check E0STKC35 MES-Error CM104- ""is required information. Thank you April 21, 2025 at 11:18 AM, 조혜근 : I just finished this. Thank you April 21, 2025 at 1:29 PM, 김대호 (Kim Dae Ho) : Cathode sliter 2f conveyor stopped Please check it out. @fa April 21, 2025 at 1:42 PM, Szeitz Flórián : Sziasztok! Anód press 2 előtt AGV torlódás. Légyszives Gyertek. Köszönöm April 21, 2025 at 1:44 PM, duzzaman Md (MCS) : @FA @adambenczik Kindly also check E0STKC51_C01 MCP Auto Manual Mode Error Currently lot of jobs are being delayed. Thank you April 21, 2025 at 1:44 PM, Dariimaa/다리마/Ivancsa : Solved April 21, 2025 at 2:02 PM, duzzaman Md (MCS) : @FA Kindly check this one. Still persists. Thank you. April 21, 2025 at 2:24 PM, adambenczik : Solved April 21, 2025 at 2:25 PM, adambenczik : Korean personnel are working on it April 21, 2025 at 2:26 PM, duzzaman Md (MCS) : Appreciate the information provided. April 21, 2025 at 3:48 PM, duzzaman Md (MCS) : @FA Please check EOCNVA51_P01 INV-01 RUN Time Over Error Thank you! April 21, 2025 at 4:01 PM, Zaya/ivancsa FA : solved April 21, 2025 at 4:08 PM, duzzaman Md (MCS) : @FA Please check E0STKC52_C01 TRACK SENSOR DETECTION ABNORMALITIES thank you! April 21, 2025 at 6:03 PM, Pintér Gábor : Sziasztok Coating anód 1 1es RW-re nem jön az AGV April 21, 2025 at 6:06 PM, Shahbaz 샤바즈 MCS/RTD : AVG#12 is in the way April 21, 2025 at 6:32 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 8+5/12 Tech, 1Sl Overtime(5): Szabadi Miklós, Harasztia Zoltán, Gégény Dávid, Zsurbej Zsolt Holiday(2): Böröcz Tamás, Rácz Dániel Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Szabadi Miklós - Powder CA AGV(1): Kertész Kornél Dániel --------------- Assy GF (3): Csanálosi Gábor, Gégény Dávid, Zsurbej Zsolt --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Form April 21, 2025 at 7:44 PM, Nagy Dávid 4 : Anod slitt 3 Conveyor probléma help help köszönöm szépen April 21, 2025 at 7:46 PM, Czeilinger Krisztián : Nemsokára megyünk. April 21, 2025 at 8:31 PM, Viktoriia Hleba : 3 slitter cathode . Convejor stop. ( lift assy) Kérem, nézze meg! April 21, 2025 at 8:42 PM, Szabadi Miki : Mindjárt megyünk April 21, 2025 at 8:49 PM, Hári Zoltàn : Katód 1 mindjárt megáll agv probléma miatt. Későn érkezett, illetve továbbra sem találja a megfelelő poziciót a rewindernel April 21, 2025 at 8:49 PM, Hári Zoltàn : Technikust kérnék April 21, 2025 at 8:49 PM, Hári Zoltàn : Coating April 21, 2025 at 8:49 PM, Viktoriia Hleba : most jó. Nagyon lassan jön a lift. April 21, 2025 at 8:52 PM, Hári Zoltàn : Nem kell jönn, nagynehezen sikerült a művelet. Köszönöm! April 21, 2025 at 8:52 PM, 배병민 (Bae Byoungmin) : @Szücs Géza FT-B Please assign one dedicated technician to the coater. April 21, 2025 at 8:53 PM, Szabadi Miki : Katod raktárban volt kis fennakadás több agv-vel azért késett April 21, 2025 at 8:55 PM, Szücs Géza FT-B : Légyszives legyen mindig valaki, aki elsődlegesen a coating hibákra megy. Ha úgy adódik, akkor az aktuális javítást hagyja félbe. April 21, 2025 at 8:58 PM, Szabadi Miki : De itt van a mongol segitő is amugy, el se mozdul coating mellől April 21, 2025 at 9:08 PM, Turianytsia Olesia : Nincs AGV 20 perc anode slitt 3 April 21, 2025 at 9:11 PM, Shahbaz 샤바즈 MCS/RTD : AGV#14 on the way April 21, 2025 at 9:37 PM, Erik Gerzsenyi : We have currently been waiting for 54 minutes on slitt 3 April 21, 2025 at 9:41 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check the carries at Roll stocker A34 P01. Thanks April 21, 2025 at 9:42 PM, Szabadi Miki : Checking April 21, 2025 at 9:45 PM, Szabadi Miki : RBA3273 is waiting on port E0STKA34_P01 but there is no order for it April 21, 2025 at 9:46 PM, Szabadi Miki : could you generate an order for an AGV? April 21, 2025 at 9:55 PM, Shahbaz 샤바즈 MCS/RTD : I am unable to create a transfer command. April 21, 2025 at 9:57 PM, Szabadi Miki : Would this material go on anode slitt 3? April 21, 2025 at 9:58 PM, Shahbaz 샤바즈 MCS/RTD : Yes the job was created earlier for Anode slit 3. April 21, 2025 at 10:01 PM, Szabadi Miki : I sent an agv to take it to slitt 3, agv#15 April 21, 2025 at 10:01 PM, Shahbaz 샤바즈 MCS/RTD : Ok thank you. April 21, 2025 at 10:01 PM, Szabadi Miki : You are welcome April 21, 2025 at 10:02 PM, Szabadi Miki : Agv#15 úton van slitt 3-ra April 21, 2025 at 10:46 PM, Viktoriia Hleba : Cathode slitt 1 ninsc tálcá. Kérem, nézze meg! April 21, 2025 at 11:25 PM, Viktoriia Hleba : Nagyon lassan érkeznek. April 21, 2025 at 11:29 PM, Szücs Géza FT-B : pillanat April 21, 2025 at 11:32 PM, Hári Zoltàn : Technikust kernek a katod 1 coater 2es rw-hez April 21, 2025 at 11:33 PM, Hári Zoltàn : Nem veszi le az unloader a jumbot! Megállt az unloader ahogy megfogta a bobint az 2es rw-n April 21, 2025 at 11:35 PM, Hári Zoltàn : Sürgős a dolog kb 15 perc mulva megáll a sor April 21, 2025 at 11:37 PM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián @Szabadi Miki merre vagytok? April 21, 2025 at 11:38 PM, Szabadi Miki : Megyünk April 21, 2025 at 11:54 PM, Rácz Dániel / FA : Nincsenek a közelben állandó jelenléttel mongolok ? April 21, 2025 at 11:56 PM, Szabadi Miki : Akad de transfer kezelést nem igazán tudják sajnos 😕 April 21, 2025 at 11:59 PM, Rácz Dániel / FA : Értem, ahogyan az assyn c/v-t se. April 22, 2025 at 12:03 AM April 22, 2025 at 12:03 AM, Ynja/ivancsa FA : igen van April 22, 2025 at 12:03 AM, Ynja/ivancsa FA : Korábban még nem dolgoztam elektródával, ezért néhány dolgot nem tudok. April 22, 2025 at 12:05 AM, Rácz Dániel / FA : Semmi baj. Írtam a tolmácsunknak hogy jelezze hogy transzfer mozgásokból oktatást kellene tartani. April 22, 2025 at 12:07 AM, Rácz Dániel / FA : Ha tudunk róla mi is tudjuk jelezni a főnökeinknek a hiányosságokat. Amint érdemi választ kapok a tolmácstól, értesíteni fogom. Addig is a kollégáim állnak szí es segítségükre. Kitartás. April 22, 2025 at 12:09 AM, Ynja/ivancsa FA : Köszönöm April 22, 2025 at 12:10 AM, Rácz Dániel / FA : Elnézést ha sértően fogalmaztam. April 22, 2025 at 2:00 AM, Nagy Dávid 4 : Anod press 2 U/W agv probléma help help köszönöm szépen April 22, 2025 at 2:01 AM, Szabadi Miki : Megyünk April 22, 2025 at 2:37 AM, Nagy Dávid 4 : 2 press anod AGV u/w no good help help köszönöm szépen April 22, 2025 at 2:39 AM, Szabadi Miki : Megyünk egy pillanat anod raktárnál vagyunk April 22, 2025 at 4:32 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STK033_C01 there is Load Collapse error Thank you April 22, 2025 at 4:34 AM, Czeilinger Krisztián : Okay. April 22, 2025 at 4:44 AM, Czeilinger Krisztián : Solved. April 22, 2025 at 7:20 AM, Vlad Danilevskyi : Hello. Anode press 2 AVG R/W problem. Thanks! April 22, 2025 at 7:22 AM, gutenkunstabelzoltan : Kesz April 22, 2025 at 7:22 AM, Vlad Danilevskyi : Fixed April 22, 2025 at 7:42 AM, Mohammad Amir : @FA @gutenkunstabelzoltan Please check E0CNVC51_08_053/54 there is Inv-01 Run time Over Error. Thank you very much! April 22, 2025 at 7:42 AM, Mohammad Amir : It is blocking materials recovery. Thank you! April 22, 2025 at 7:47 AM, gutenkunstabelzoltan : Kesz April 22, 2025 at 7:47 AM, Mohammad Amir : Thank you very much! April 22, 2025 at 8:31 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 안녕하세요 전극 코터 4라인 Burst run 일정이 하기와 같이 진행되는게 맞으실까요? 일정 공유 부탁드립니다. - 4/24 : 4라인 양극 - 4/28 : 4라인 음극 April 22, 2025 at 9:00 AM, 서지원 : 안녕하세요 펨님! 네네 해당 일정으로 진행할 예정입니다. April 22, 2025 at 9:04 AM, 배병민 (Bae Byoungmin) : 넵 확인 감사합니다 생산전 금일부터 양일간 양극 4라인에서 AGV 테스트를 진행예정입니다 AGV 이동동선 주변으로 재재등만 정리 부탁드립니다. 감사합니다 April 22, 2025 at 9:22 AM, Szeitz Flórián : Sziasztok! Légyszives nézzétek meg milyen RBC számú roll-t hozzott az AGV a katód Slitt 3 -ra 9 körül, mivel nincs rajta lot szám. Köszönöm April 22, 2025 at 9:23 AM, Mohammad Amir : Checking April 22, 2025 at 9:25 AM, Mohammad Amir : It is RBC3379 for this job was created at 9:14. And it is currently on AGV#14. Thank you very much! April 22, 2025 at 9:26 AM, gutenkunstabelzoltan : Before that one! if u can find that pls! April 22, 2025 at 9:26 AM, Mohammad Amir : Sure, Checking! April 22, 2025 at 9:27 AM, Mohammad Amir : Before that one:- RBC3376 arrived at 8:11 at E1SLC030_P01. Thank you very much! April 22, 2025 at 9:32 AM, Szeitz Flórián : Köszönöm April 22, 2025 at 9:33 AM, Mohammad Amir : Szivesen Nagyon! April 22, 2025 at 9:35 AM, Mohammad Amir : @gutenkunstabelzoltan Please check E0CNVA51_P04 there is INV-01 Run time Over Error and it is blocking materials recovery. Thank you very much! April 22, 2025 at 9:43 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 2 Transfer probléma az R/W oldalon Kérek nézzetek meg, köszi April 22, 2025 at 11:22 AM, Szeitz Flórián : Anód Slitt 2 re nem érkezik a tálca megnéznétek mi az oka. Köszönöm April 22, 2025 at 11:25 AM, gutenkunstabelzoltan : Cv jo daruk jok elvileg April 22, 2025 at 11:31 AM, Vászon Márton : Sziasztok katód pressz kettes gép uw oldalhoz kérnénk valakit köszi April 22, 2025 at 11:40 AM, 주범진 : @Kurgya Attila hello Please tell me 1line's insulation LOT A,B side April 22, 2025 at 11:43 AM, Kurgya Attila : A side 2411-2107 B side 2411-1907 April 22, 2025 at 12:44 PM, 주범진 : Please try it again April 22, 2025 at 1:16 PM, Szarka Adrián : Sziasztok. 16 5 7 Számú agv parkoljatok vele odébb kerlek. Takarítás miatt. Köszönöm April 22, 2025 at 1:16 PM, Szarka Adrián : Katod Press April 22, 2025 at 1:44 PM, Mohammad Amir : @FA @gutenkunstabelzoltan Please check E0STk002_C01 there is Travel Driver error. Thank you! April 22, 2025 at 1:47 PM, 주범진 : @Kurgya Attila April 22, 2025 at 1:50 PM, Szeitz Flórián : Sziasztok! Anód Slitt Conveyor pályàn torlódnak a tálcák. Légyszives nézzétek meg miért. Köszönöm April 22, 2025 at 2:38 PM, Kurgya Attila : I was able to register the new insulation, it was an update problem in Mes. April 22, 2025 at 2:46 PM, 주범진 invited 전성태 Joseph and Richard Katona. April 22, 2025 at 2:47 PM, 주범진 : @Richard Katona hello Richard, If you are curious about the location of the insulation solution, please ask here April 22, 2025 at 3:09 PM, Kurgya Attila : Segítséget kérek fólia raktárhoz. Ajtónyitási hiba volt. April 22, 2025 at 3:12 PM, Vlad Danilevskyi : Hello. Anode press 2 AVG U/W problem. Thank you April 22, 2025 at 3:19 PM, Karina Lyzanets : Slitt Cathode 1 Transfer problema az R/W oldalon Gyertek légyszíves Köszönöm April 22, 2025 at 3:37 PM, adambenczik : El fog tartani egy darabig April 22, 2025 at 3:43 PM, adambenczik : Kész April 22, 2025 at 4:34 PM, 배병민 (Bae Byoungmin) : @서지원 PM님 아직 코터 양극 4라인 자재등이 안치워져 있습니다. AGV test를 하지 못하면 burst run 시 AGV 사용에 문제가 발생할수있습니다 언제쯤 자재정리 가능하실까요? April 22, 2025 at 4:55 PM, Karina Lyzanets : Szlitter Cathode 3 nem jönnek a Reel tálcák Kérek gyertek nézzetek meg😅 Köszi szépen April 22, 2025 at 4:55 PM, Mohammad Amir : Checking April 22, 2025 at 4:56 PM, Mohammad Amir : There were issues with E0STKC52/51 that's why empty tray supply was disrupted. Now everything is fine and empty trays on the way. ✅ Thank you! April 22, 2025 at 5:03 PM, Mohammad Amir : @Kiss Balázs F.A. Please check E0CNVC51 _08_48 it is OOS and now blocking empty trays delivery. Thank you! April 22, 2025 at 5:04 PM, Mohammad Amir : Error-lift down move time over . April 22, 2025 at 5:19 PM, gutenkunstabelzoltan : I can get the lift moveing… and i dont know why… April 22, 2025 at 6:10 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 9+3/12 Tech, 1Sl Overtime(3): Hufnágel Dániel, Kasztel Balázs, Novák Zoltán Holiday(1): Czeilinger Krisztián Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós, Novák Zoltán --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Kasztel Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikuso April 22, 2025 at 6:30 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 22 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 22, 2025 at 8:08 PM, Pintér Gábor : Sziasztok szeretnék segítséget kérni Coating Anód 1 1-es R/w-nél April 22, 2025 at 8:31 PM, Szücs Géza FT-B : tartoktok szünetet April 22, 2025 at 8:40 PM, Pintér Gábor : ? April 22, 2025 at 8:46 PM, Viktor Vadas : Sziasztok! Katod 1re kernenk segitseget, 2-es Rewinderre tarto robot megadta magat ut kozben. April 22, 2025 at 8:47 PM, Viktor Vadas : Megoldodott April 22, 2025 at 9:52 PM, Nagy Dávid 4 : Katod press 3 mögött az agv kiált hibára help help köszönöm szépen April 22, 2025 at 10:08 PM, Csanálosi Gábor FA : CNV 51-en tálca elakadás van April 22, 2025 at 10:08 PM, Csanálosi Gábor FA : Ca April 22, 2025 at 10:09 PM, Böröcz Tamás : Tudjuk April 22, 2025 at 10:09 PM, Böröcz Tamás : Volt April 22, 2025 at 10:09 PM, Szücs Géza FT-B : kész April 22, 2025 at 10:09 PM, Szücs Géza FT-B : hozzá teszem, gyalokkk April 22, 2025 at 10:10 PM, Csanálosi Gábor FA : Tintinből. April 22, 2025 at 10:10 PM, Szücs Géza FT-B : nem, szabályt szegve elhagytam a coatert és az SLA01 astalt is April 22, 2025 at 10:11 PM, Csanálosi Gábor FA : Kemény vagy Csoki. April 22, 2025 at 10:12 PM, Böröcz Tamás : Kellő komolysággal srácok, ez egy munkahely April 22, 2025 at 11:46 PM, Nagy Dávid 4 : Anod press 2 agv probléma help help köszönöm szépen April 22, 2025 at 11:47 PM, Nagy Dávid 4 : U/W April 23, 2025 at 2:49 AM April 23, 2025 at 2:49 AM, Nagy Dávid 4 : Anod press 6-os gépnél a 24 és a 11 agv útban van légyszíves küldjétek el hogy lehessen takarítani köszönöm szépen April 23, 2025 at 5:20 AM, Viktor Vadas : Sziasztok! Segitseg kellene katod 1 1es Rewinderre. April 23, 2025 at 5:20 AM, Viktor Vadas : Jumbo levetel kozben megallt ismet. April 23, 2025 at 5:21 AM, Viktor Vadas : Koreai holgynek egyelore sikerul kihoznia manualisan. April 23, 2025 at 5:47 AM, Viktor Vadas : Katod 1 2-es Rewindernel az agv megunta a szolgalatot. April 23, 2025 at 5:47 AM, Viktor Vadas : Segitseget kernenk az iranyba allitashoz. April 23, 2025 at 5:50 AM, Viczai Tamás : Megyünk April 23, 2025 at 5:57 AM, Viktor Vadas : 1es Rewinderen meg ahogy levenne a jumbot a rewinderrol megall, megkoszonnenk ha arra raneznetek! April 23, 2025 at 6:14 AM, 김태현 : This message was deleted. April 23, 2025 at 6:14 AM, 김태현 : @Fa cathode 1 problem occurred April 23, 2025 at 6:19 AM, Mohammad Amir : @FA @gutenkunstabelzoltan Please check E1SLC030_P03 there is PIO complete on time over error. Thank you! April 23, 2025 at 6:35 AM, K.Krisz Coating : Sos kell valaki kat 1-re ,bufferon ragadt a jumbo April 23, 2025 at 6:36 AM, 김태현 : @FA Can't get off the AGV manually? April 23, 2025 at 6:36 AM, Skwarek Tibor : This message was deleted. April 23, 2025 at 6:36 AM, Skwarek Tibor : Megyek April 23, 2025 at 8:58 AM, Szarka Adrián : Sziasztok April 23, 2025 at 8:59 AM, Szarka Adrián : Katod roll raktárban bent áll a 16 agv ki tudnátok küldeni takarítás miatt köszönök April 23, 2025 at 8:59 AM, Farkas Tamàs : Megyek April 23, 2025 at 9:16 AM, Mohammad Amir : @Farkas Tamàs Please check E0CNVA51-06_046 there is Data mismatch error. Thank you! April 23, 2025 at 9:17 AM, Skwarek Tibor : Koreaian collegue working there. April 23, 2025 at 9:19 AM, Szarka Adrián : Sziasztok Anod Slitt 3 gépen reel tálca hiba van megtudnátok nézni kerlek ? Köszönöm April 23, 2025 at 9:19 AM, Skwarek Tibor : Megyek April 23, 2025 at 9:20 AM, Mohammad Amir : Thank you very much for the information! April 23, 2025 at 9:21 AM, Skwarek Tibor : Kész April 23, 2025 at 9:21 AM, Skwarek Tibor : Youre welcome April 23, 2025 at 9:29 AM, Skwarek Tibor : Az raktár transferek manualban, takarítás miatt April 23, 2025 at 9:29 AM, Skwarek Tibor : CA April 23, 2025 at 9:42 AM, na1tis : Hello! Cathode Press 2,AGV problem, The robot is not working, Thank you April 23, 2025 at 9:50 AM, Skwarek Tibor : Because of cleaning the agv s waiting now. April 23, 2025 at 9:53 AM, Skwarek Tibor : Ca raktárak, agv k elindultak April 23, 2025 at 10:32 AM, Mohammad Amir : @Skwarek Tibor Please check E0STKC31_M01 there is Data_Off Sensor on overtime error. Thank you! April 23, 2025 at 10:35 AM, Skwarek Tibor : Checking April 23, 2025 at 10:35 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 10:36 AM, 김태현 : @FA AGV담당자 한국분계신가요 April 23, 2025 at 10:36 AM, 김태현 : 양극1라인 1번 리와인더 문제있는데 봐주실수있나요 April 23, 2025 at 10:36 AM, KIM SEYEON [김세연]_FA : @지석범PM (이반차FA) 피엠님 지원요청드립니다. April 23, 2025 at 10:37 AM, Skwarek Tibor : Done. Operators didn t finosh the storeing process. Data off sensor alarm occure when a roll waiting on manual port for too long time without store. April 23, 2025 at 10:38 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 10:38 AM, Oláh Rajmund : Sziasztok rá tudtok nézni légyszives hogy anodra miért nem jön reel tálca? Koszonom April 23, 2025 at 10:38 AM, Skwarek Tibor : Your re welcome April 23, 2025 at 10:39 AM, Skwarek Tibor : Koreai kollégák szenzorokat tesztelnek a felső emeleten már jóideje. April 23, 2025 at 10:46 AM, Skwarek Tibor : Jönnek lassan. Elindították a szalagot. Sok a feladat a daruknak is. April 23, 2025 at 11:00 AM, Yanina : Sziasztok, Cathode slitt 3 nem jó transzfer U/W April 23, 2025 at 11:01 AM, Skwarek Tibor : Megyek April 23, 2025 at 11:33 AM, Yanina : Sziasztok, Cathode slitt nincs tálcà ( April 23, 2025 at 11:34 AM, Skwarek Tibor : Daru hiba miatt késnek April 23, 2025 at 11:35 AM, Mohammad Amir : Hello, There is constant issue in E0STKC51 that's why Trays did not come . However I am increasing priority of Tray jobs from E0STKC52 so that you will receive some trays at least. Thank you! April 23, 2025 at 11:36 AM, Yanina : Köszönöm szépen) April 23, 2025 at 11:36 AM, Mohammad Amir : Empty trays from E0STKC52 are on the way. ✅ Thank you very much! April 23, 2025 at 11:36 AM, Mohammad Amir : You are welcome! April 23, 2025 at 11:40 AM, Mohammad Amir : For your information, Empty trays have now started to arrive ✅. Thank you! April 23, 2025 at 11:50 AM, Szarka Adrián : Sziasztok. Katod Press 7-8 kertünk agv. Megtudjátok nézni hogy meg kapta e a rendszer a jelet ? Köszönöm April 23, 2025 at 11:51 AM, Mohammad Amir : Checking April 23, 2025 at 11:52 AM, Mohammad Amir : We have successfully received LR from both Cathode Press -7&8 at 11:49 and 11:50 consequently. However currently there is no material available. Thank you very much! April 23, 2025 at 12:23 PM, Yanina : Szia) Cathode slitt 3 nincs AGV 42p April 23, 2025 at 12:24 PM, Skwarek Tibor : Nézzük April 23, 2025 at 12:25 PM, Mohammad Amir : Currently there is no material available that's why AGV is not coming. Thank you! April 23, 2025 at 12:26 PM, Yanina : Köszönöm szépen April 23, 2025 at 12:26 PM, Mohammad Amir : Szivesen! April 23, 2025 at 12:39 PM, Oláh Rajmund : Anod oldalon tele van a reel szalag és nem viszi tovább az anyagot rá tudtok nézni? Koszonom April 23, 2025 at 12:39 PM, Skwarek Tibor : Megyek April 23, 2025 at 12:41 PM, Mohammad Amir : Please check LTA0592 located at E0STKA52_P01 ,it is not moving and blocking other materials. Everything is good from MCS RTD side. Please check physically! Thank you very much! April 23, 2025 at 12:44 PM, Skwarek Tibor : AN oldalon roll raktárak takarítása miatt transferrek manualban April 23, 2025 at 1:09 PM, Oláh Rajmund : AN oldalon a roll raktárak vissza kapcsolva autóba April 23, 2025 at 1:35 PM, Czél Tamás : Sziasztok Még tudnátok nézni kérlek hogy miért nincs Anód oldalon reel tálcánk? Köszönöm April 23, 2025 at 1:35 PM, Farkas Tamàs : Nézzük April 23, 2025 at 1:37 PM, Farkas Tamàs : Jönnek csak lassan April 23, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Novák Károly, Kasztel Balázs, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 23, 2025 at 6:28 PM, Somoskövy Martin : Sziasztok. Anode 3-as roll raktárban vagy egy anyag amiért nem jön AGV. Megnéznétek? Köszönöm. April 23, 2025 at 6:29 PM, Szabadi Miki : Igen April 23, 2025 at 6:35 PM, Turianytsia Olesia : A szállítószalag elakadt anode slitt 2 April 23, 2025 at 6:37 PM, Turianytsia Olesia : Nem az A oldalról vette át az anyagot April 23, 2025 at 6:37 PM, Szabadi Miki : Megyünk April 23, 2025 at 6:52 PM, Turianytsia Olesia : U/W-n nem tesz fel anyagot a sorra Cathode Slitt 4 April 23, 2025 at 7:00 PM, Szabadi Miki : Megyünk April 23, 2025 at 7:17 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 23 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 23, 2025 at 7:27 PM, Turianytsia Olesia : Nincsenek AGV-k anode slitt 1-2 April 23, 2025 at 7:28 PM, Szabadi Miki : @VK (mcs) April 23, 2025 at 7:28 PM, Dániel Hufnágel : Just a moment please, slowly AGV will come April 23, 2025 at 7:29 PM, Szabadi Miki : Please check thank you April 23, 2025 at 7:30 PM, Szabadi Miki : Agv#11 úton slitt 2 April 23, 2025 at 7:31 PM, VK (mcs) : There was an issue with AGV 11, Other carrier for 1st slitter is also assigned from that STK, thx April 23, 2025 at 7:32 PM, Turianytsia Olesia : Nincsenek tálcák Anode Slitt 2 April 23, 2025 at 7:32 PM, Szabadi Miki : Nézzük April 23, 2025 at 7:33 PM, Szabadi Miki : Jön csak lassan April 23, 2025 at 7:35 PM, Dániel Hufnágel : @VK (mcs) Good evening! We have a problem with anode stocker 33 transfer! Can you modify or diable this port? We can not use this port tonight cause we do not have PLC member tonight, so stocker 33 automatik port will oos tonight! April 23, 2025 at 7:37 PM, VK (mcs) : Sure I will change it, but first transfer transfer current carrier in the port April 23, 2025 at 7:38 PM, Dániel Hufnágel : Yes we clear it now April 23, 2025 at 7:39 PM, VK (mcs) : Port is OoS now, thx April 23, 2025 at 7:47 PM, Csicskovics Balázs : Cathode press 8 AGV kiállt hibára. Gyertek légyszíves Köszönöm April 23, 2025 at 8:07 PM, Kiss Balázs F.A. : Az állni is fog egy kis ideig most April 23, 2025 at 8:29 PM, Kiss Balázs F.A. : Kész April 23, 2025 at 9:27 PM, Csicskovics Balázs : @Dániel Hufnágel kérlek gyere a cathode press 8 hoz. Köszönöm April 23, 2025 at 9:33 PM, Csicskovics Balázs : Anode press 2 R/Wnél az AGV elakadt. Köszönöm April 23, 2025 at 9:43 PM, Turianytsia Olesia : Nincsenek tálcák Anode Slitt 2 April 23, 2025 at 10:03 PM, Dániel Hufnágel : Sad but have to wait. Materials will come,but anode reel storage is overloaded! April 23, 2025 at 10:10 PM, Turianytsia Olesia : A szállítószalag elakadt anode slitt 3 April 23, 2025 at 10:40 PM, Somoskövy Martin : Cathode Press 7-es R/W-ben többszöri próbálkozásra sem sikerült az AGV-nek beállnia és most hibával bennt van. Megnéznétek? Köszönöm. April 24, 2025 at 12:17 AM April 24, 2025 at 12:17 AM, Turianytsia Olesia : Nincsenek tálcák Anode Slitt 2 April 24, 2025 at 12:18 AM, Farkas Dániel Elekt : Sziasztok Anod poron megalltak a robotok April 24, 2025 at 12:18 AM, Farkas Dániel Elekt : Nezzetek meg legyszives April 24, 2025 at 12:23 AM, Szabadi Miki : Nemsoká megyünk April 24, 2025 at 1:05 AM, Majláth Martin : Sziasztok catod press 2 rw nem veszi fel a robot kar a rollt Tud valaki segíteni? Köszi April 24, 2025 at 1:06 AM, Szabadi Miki : Poron vagyunk , amit visszaérünk April 24, 2025 at 1:07 AM, Turianytsia Olesia : Nincsenek tálcák Cathode Slitt 2 April 24, 2025 at 1:14 AM, Baek Hojong(백호종)FA : Solved April 24, 2025 at 1:22 AM, Jun(정우준)_SKOH FA : @VK (mcs) Do you know why the empty reel tray transfer to sliter job doesn't generate on the c51? April 24, 2025 at 1:23 AM, VK (mcs) : Checking April 24, 2025 at 1:24 AM, Somoskövy Martin : Cathode Press 7 U/W-ben maradt az AGV anyagfelrakás után. Megnéznétek? Köszönöm. April 24, 2025 at 1:25 AM, Kiss Balázs F.A. : Majd megyünk April 24, 2025 at 1:25 AM, Kiss Balázs F.A. : Poron vagyunk April 24, 2025 at 1:25 AM, Dániel Hufnágel : @Baek Hojong(백호종)FA can you please check it? April 24, 2025 at 1:29 AM, Baek Hojong(백호종)FA : Solved April 24, 2025 at 1:32 AM, VK (mcs) : There is nothing wrong According to rule 2 jobs create from C52 and 1 from C51. Since C52 is busy then all jobs are remained from C52. April 24, 2025 at 1:34 AM, Jun(정우준)_SKOH FA : okay thx April 24, 2025 at 2:27 AM, Turianytsia Olesia : Nincsenek tálcák Anode Slitt 1-2 April 24, 2025 at 2:29 AM, Szabadi Miki : Lassan jönnek raktárnak sok a feladat sajnos , türelmet kérek April 24, 2025 at 4:22 AM, Hári Zoltàn : Gyertek legyszi az anod 1 coaterre! 2-es rw-n gond van! Koszi! April 24, 2025 at 4:23 AM, Szabadi Miki : Megyek April 24, 2025 at 4:23 AM, Hári Zoltàn : Megoldotta a hölgy April 24, 2025 at 4:23 AM, Hári Zoltàn : Azért köszi! April 24, 2025 at 5:40 AM, Dániel Hufnágel : @Koncz Tamás @KIM SEYEON [김세연]_FA Jó reggelt! Mai éjszakás műszak alatt nem sikerült elindítani a press#8 U/W, és mai nap folyamán tervezett burst run lesz! Szeretnénk kérni mai napon minél előbb reagáljon erre a telepitő cég! Köszönjük! April 24, 2025 at 6:52 AM, duzzaman Md (MCS) : @FA Kindly check E0CNV51 UNIT : 6182 ALARM : RESERVED THANK YOU April 24, 2025 at 6:55 AM, Skwarek Tibor : The solution is ongoing. April 24, 2025 at 6:56 AM, duzzaman Md (MCS) : Thank you for the information. Have a good day ahead. April 24, 2025 at 7:06 AM, 배병민 (Bae Byoungmin) : Dear Electrode coater shift leader The electrode Ca coater 4-line cart must not be placed on the AGV's path. Please remove it. April 24, 2025 at 7:07 AM, Skwarek Tibor : Thank you! April 24, 2025 at 7:10 AM, Oláh Rajmund : Sziasztpk gyertek legyszives anode roll raltárba Koszonom April 24, 2025 at 7:11 AM, Viczai Tamás : Megyünk April 24, 2025 at 7:17 AM, Oláh Rajmund : Anode slitt 2 re is tudtok jönni? Koszonom April 24, 2025 at 7:17 AM, Viczai Tamás : Megyünk April 24, 2025 at 7:41 AM, Yanina : Sziasztok, Cathode slitt nincs tálcà ( April 24, 2025 at 7:42 AM, Farkas Tamàs : Raktár hibában van. Már mennek csinálni April 24, 2025 at 8:59 AM, 김대호 (Kim Dae Ho) : Please check the conveyor alarm on the second floor of the cathode sliter. April 24, 2025 at 9:01 AM, Skwarek Tibor : Done April 24, 2025 at 9:10 AM, 김대호 (Kim Dae Ho) : Again April 24, 2025 at 9:11 AM, Skwarek Tibor : Done April 24, 2025 at 9:12 AM, 김대호 (Kim Dae Ho) : Please take accurate measures, not temporary measures. April 24, 2025 at 9:12 AM, Skwarek Tibor : Different error come up April 24, 2025 at 9:14 AM, 김대호 (Kim Dae Ho) : Thank you April 24, 2025 at 9:36 AM, Koska Szilárd János : Sziasztok megnéznétek miért nemjön anyag Anód Pressekre? April 24, 2025 at 9:38 AM, Marsi Gábor : Nézzük April 24, 2025 at 9:38 AM, Koska Szilárd János : Köszi April 24, 2025 at 10:01 AM, Koska Szilárd János : Sziasztok kínáltak hibára az agv Anód press 2 mellett a töltönél April 24, 2025 at 10:04 AM, 김대호 (Kim Dae Ho) : Please check the Cathode press 8 R/W error April 24, 2025 at 10:04 AM, 김대호 (Kim Dae Ho) : Buffer pio error April 24, 2025 at 10:15 AM, Szarka Adrián : Katod Coating 2 nél a 22 agv ki állt hibára. Gyertek kerlek. Köszi April 24, 2025 at 10:15 AM, Skwarek Tibor : Megyek April 24, 2025 at 10:18 AM, Yanina : Cathode slitt 5 probléma transzfer R/W April 24, 2025 at 10:19 AM, Skwarek Tibor : Koreai kollégák dolgoznak rajta April 24, 2025 at 10:19 AM, Skwarek Tibor : Megyek April 24, 2025 at 11:03 AM, Koska Szilárd János : Üdv ismét nemhoz anyagot press gépre 20 perce legalább April 24, 2025 at 11:21 AM, duzzaman Md (MCS) : @FA Please check E0CNVC11_RTV01 is OOS, CV01 RUN TIME OVER ALARM Thank you April 24, 2025 at 11:24 AM, Yanina : Sziasztok, Anód slitt nincs tálcà ( April 24, 2025 at 11:25 AM, Yanina : Kérjük, nézze meg April 24, 2025 at 11:31 AM, Farkas Tamàs : Nézzük April 24, 2025 at 11:32 AM, Farkas Tamàs : Mennek csak lassan April 24, 2025 at 11:39 AM, duzzaman Md (MCS) : Everything seems fine. It's being normalised now. Thank you April 24, 2025 at 11:43 AM, duzzaman Md (MCS) : @FA Please check E0CNVA51_06_046 PORT INTERFACE ERROR 01 THANK YOU April 24, 2025 at 11:45 AM, duzzaman Md (MCS) : Kindly check E0STKA34_C01, too. Fork#1 Centre error When first active Appreciate your prompt support . April 24, 2025 at 11:46 AM, Yanina : Köszönöm szépen) April 24, 2025 at 11:58 AM, 배병민 (Bae Byoungmin) : @김건희 PM님 양극 Press#8 점검 및 조치 완료되어 정상 가동 진행하겠습니다 April 24, 2025 at 11:58 AM, 김건희 : 감사합니다 @Jozsef Foldi it is done April 24, 2025 at 12:35 PM, Yanina : Cathode slitt 5 probléma transzfer R|W April 24, 2025 at 12:36 PM, Viczai Tamás : Megyünk April 24, 2025 at 1:25 PM, Yanina : Cathode slitt 5 probléma transzfer U/W April 24, 2025 at 1:26 PM, Skwarek Tibor : Megyünk April 24, 2025 at 1:27 PM, Szarka Adrián : Katod Slitt 5 re gyertek kerlek April 24, 2025 at 1:27 PM, Szarka Adrián : Fel tette a robot a rollt a gépre de nem engedi el és nem megy odébb a robot. Köszönöm April 24, 2025 at 1:41 PM, Zsmenyák György : Sziasztok anód Slitt 2 nem viszi el a robot a reelt , segítséget kérünk. April 24, 2025 at 1:41 PM, Skwarek Tibor : Megyünk April 24, 2025 at 2:34 PM, Czél Tamás : Katód Slitt 4-re kérnék segítséget. Nem indult el a letolás. Köszönöm April 24, 2025 at 2:39 PM, Viczai Tamás : Megyünk April 24, 2025 at 2:49 PM, 김대호 (Kim Dae Ho) : Please check the error of Anode sliter 1 u/w April 24, 2025 at 2:56 PM, Viczai Tamás : Megyünk mindjárt! April 24, 2025 at 2:57 PM, Farkas Tamàs : Itt vagyunk April 24, 2025 at 3:18 PM, Koska Szilárd János : Sziasztok visszatudnátok nézni Anód press 1 re milyen anyagot hozott ki a Lot száma kellene April 24, 2025 at 3:19 PM, Skwarek Tibor : Nézem April 24, 2025 at 3:29 PM, Skwarek Tibor : RBA3638 April 24, 2025 at 3:33 PM, Skwarek Tibor : Lot számot nem tudok nézni, csak ezt April 24, 2025 at 3:35 PM, Czél Tamás : Roll warehousingba meg tudod nézni RBA szám alapján April 24, 2025 at 3:45 PM, Skwarek Tibor : Nem tudom megnézni April 24, 2025 at 3:46 PM, Czél Tamás : Szilárdnak írtam, neki tudnia kell 😁 April 24, 2025 at 3:47 PM, Skwarek Tibor : Rendben😀 April 24, 2025 at 4:31 PM, Oláh Rajmund : This message was deleted. April 24, 2025 at 4:42 PM, Jozsef Foldi : Katód press 7re nem jön az agv leszedni a rollt. Gyertek és csináljatok meg kérlek! April 24, 2025 at 4:43 PM, Viczai Tamás : Megyünk April 24, 2025 at 4:47 PM, Jozsef Foldi : @Farkas Tamàs @Marsi Gábor fel kéne oldani a mozgás tiltast. April 24, 2025 at 4:48 PM, Marsi Gábor : OK rendben April 24, 2025 at 4:48 PM, Farkas Tamàs : Rendben April 24, 2025 at 4:49 PM, Farkas Tamàs : Kész April 24, 2025 at 4:54 PM, Jozsef Foldi : Gyertek már ide, nem megy ez a szar! April 24, 2025 at 4:55 PM, Farkas Tamàs : Megyünk April 24, 2025 at 4:55 PM, Jozsef Foldi : Viszi April 24, 2025 at 6:12 PM, Csicskovics Balázs : Cathode press 8 U/Wra nem teszi fel a robot a Roll-t. Gyertek légyszíves Köszönöm April 24, 2025 at 6:13 PM, 김대호 (Kim Dae Ho) : Cathode sliter 2nd floor conveyor stopped Check it out. April 24, 2025 at 6:15 PM, Szabadi Miki : Kész April 24, 2025 at 6:15 PM, Szabadi Miki : Coming April 24, 2025 at 6:16 PM, Somoskövy Martin : Sziasztok. Anode Press 6 mögött feltorlódtak az AGV-k. Megnéznétek? Köszönöm. April 24, 2025 at 6:18 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Novák Zoltán, Nagy Zsolt, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 24, 2025 at 6:19 PM, Szabadi Miki : Igen megyünk April 24, 2025 at 6:57 PM, Csicskovics Balázs : Anode press 2re nem hoz az AGV anyagot. Kérlek nézzétek meg. Köszönöm April 24, 2025 at 6:58 PM, Szabadi Miki : @VK (mcs) hello, check please. April 24, 2025 at 7:00 PM, VK (mcs) : STK A34 is OoS. Material assigned and waiting for storage. Thx April 24, 2025 at 7:00 PM, Kiss Balázs F.A. : Hibába a raktár és innen vinne anyagot April 24, 2025 at 7:01 PM, Kiss Balázs F.A. : Szenzor csere után megfog oldódni a raktár hiba April 24, 2025 at 7:02 PM, Szabadi Miki : There is a warehouse error, could you send material from another warehouse? April 24, 2025 at 7:02 PM, Csicskovics Balázs : Rendben köszönöm April 24, 2025 at 7:07 PM, VK (mcs) : Okay I will cancel the job, Please apply LR again for that machine April 24, 2025 at 7:08 PM, VK (mcs) : Job assigned from STK A32 April 24, 2025 at 7:09 PM, Szabadi Miki : Thank you! April 24, 2025 at 7:18 PM, Dániel Hufnágel : Anód 34 es műszaki hiba miatt ideinglenesen állni fog egy darabig! Hamarosan érkezik a csere alkatrész és indítjuk! Erről értesíteni fogok mindenkit! April 24, 2025 at 7:33 PM, Farkas Dániel Elekt : Sziasztok.por katodon agv hiba a raktarnal osszevesztek April 24, 2025 at 7:33 PM, 김대호 (Kim Dae Ho) : Please check Cathode slitet 4. April 24, 2025 at 7:33 PM, Dániel Hufnágel : Szives türelmet kérünk April 24, 2025 at 7:33 PM, Szabadi Miki : Coming April 24, 2025 at 8:46 PM, Hári Zoltàn : Sziasztok! Hamarosan indul az anód 1 coater Ha van lehetőség légyszi jöjjön valaki felügyelni! Köszönöm! April 24, 2025 at 8:52 PM, Baek Hojong(백호종)FA : Do not use AGV until I arrive April 24, 2025 at 8:52 PM, Hári Zoltàn : When u arrive? April 24, 2025 at 9:01 PM, Szabadi Miki : Szerintem igen csak most elvesztünk April 24, 2025 at 9:02 PM, Dániel Hufnágel : @Baek Hojong(백호종)FA Can you please focus on coating area? We have a lot of another problem! Thank you! April 24, 2025 at 9:05 PM, Hári Zoltàn : Coating anod 1 will be later... we have foil rupture now April 24, 2025 at 10:15 PM, Csicskovics Balázs : Cathode slitt 4 re gyertek kérlek April 24, 2025 at 10:15 PM, Csicskovics Balázs : Köszönöm April 24, 2025 at 10:32 PM, Szabadi Miki : Megyünk April 24, 2025 at 11:36 PM, Szabadi Miki : Stka34 working normal , repair done April 24, 2025 at 11:37 PM, Hári Zoltàn : Anód 1 coater started April 24, 2025 at 11:38 PM, Szabadi Miki : Rendben itt vagyunk figyeljük, egyenlőre nincsenek most támogatok rajtunk kivül April 24, 2025 at 11:39 PM, Hári Zoltàn : Hello! Can you coming to the anod 1 coater? We want to use the agv's! Thank you! April 24, 2025 at 11:42 PM, VK (mcs) : Thank you Any idea about STK A33? Was auto port repaired? @Dániel Hufnágel April 24, 2025 at 11:52 PM, Dániel Hufnágel : As i know they do not check it yet, so it sgould stay at it was April 24, 2025 at 11:54 PM, 류종석(RyuJongSeok) : 코팅 음극 1라인 스타트 했습니다 April 24, 2025 at 11:55 PM, Baek Hojong(백호종)FA : 네 지금갑니다 잠시만요 April 25, 2025 at 2:40 AM April 25, 2025 at 2:40 AM, Majláth Martin : Sziasztok! Catod slitt 4-5 szállítószalag meg állt Valaki tud segíteni? Köszi April 25, 2025 at 2:40 AM, Csicskovics Balázs : Légyszíves ezt most gyorsan. Köszönöm April 25, 2025 at 2:40 AM, Szabadi Miki : Megyünk April 25, 2025 at 3:11 AM, Turianytsia Olesia : A szállítószalag nem működik. Anode slitt 2 April 25, 2025 at 3:12 AM, Szabadi Miki : Megyünk April 25, 2025 at 5:15 AM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 4-5 April 25, 2025 at 5:31 AM, Dániel Hufnágel : Every carrier stopped, please be patient! We have communication problem! April 25, 2025 at 6:21 AM, Kurgya Attila : Sziasztok Elindult Anod 1, ehhez agv-ket szeretnénk használni. Van részetekről akadálya? April 25, 2025 at 6:25 AM, Mr.Miti (미티) FA : Semmi akadály April 25, 2025 at 6:25 AM, Mr.Miti (미티) FA : Had menjen April 25, 2025 at 6:57 AM, Mr.Miti (미티) FA : Slitt 4-re megjöttek a tálcák April 25, 2025 at 7:19 AM, Kurgya Attila : Anod 1en leálltunk az agv-el mert bekapcsoltunk egy olyan funkciót ami miatt nem lehet. April 25, 2025 at 7:32 AM, duzzaman Md (MCS) : @FA Please check E0STKC33_P01 IPS Sensor Reading Fail Thanks! April 25, 2025 at 7:42 AM, Szarka Adrián : Sziasztok. Tudnátok abban segíteni kérlek, hogy katod Slitt 2 géphez nem megy reel tálca, megtudjátok nézni kerlek hogy miért megy nagyon lassan vagy miért nem megy a tálca oda ? Köszönöm szépen April 25, 2025 at 7:42 AM, Mr.Miti (미티) FA : Úton van April 25, 2025 at 7:42 AM, Mr.Miti (미티) FA : CsK lassan mert sok a gond a reel raktározni April 25, 2025 at 8:20 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 25, 2025 at 8:38 AM, Karina Lyzanets : Sziasztok! Gyertek légyszíves az Slitt Cathode 4-5 April 25, 2025 at 8:42 AM, Karina Lyzanets : Köszönöm szépen April 25, 2025 at 8:50 AM, Oleksii Krasnoshchok : Hello anode press 2 u/w transfer stoped April 25, 2025 at 9:36 AM, Szeitz Flórián : Anód press 7 használnunk kell majd AGV-vel de az U/W -nèl bent parkol a 26 AGV . April 25, 2025 at 9:38 AM, Szarka Adrián : Sziasztok anod Press 7-8 indul. Szeretnénk kérni majd egy agv és robot ellenőrzést. Köszönöm April 25, 2025 at 9:39 AM, Mr.Miti (미티) FA : Rendben megyek April 25, 2025 at 9:43 AM, adambenczik : Remélhetőleg megfelelő program van a treszfereken 🥲 April 25, 2025 at 9:44 AM, Kurgya Attila : Legyszi segítsetek anod roll raktárba az 5ös raktárnál. Köszi April 25, 2025 at 9:48 AM, cehmannzsoltcehmann : Itt vagyok, mi a baj? April 25, 2025 at 9:49 AM, Szarka Adrián : Agv meg kértük anod Press 7-8 ra. Jelet ki küldte ? Elindult az agv ? April 25, 2025 at 9:50 AM, duzzaman Md (MCS) : @FA Please check E0CNVA51_P01 Inv 01 runtime over error THANK YOU April 25, 2025 at 9:51 AM, Mr.Miti (미티) FA : Nézem April 25, 2025 at 9:51 AM, cehmannzsoltcehmann : Megjelent a kérelem az acs-ben April 25, 2025 at 9:51 AM, adambenczik : Press 8-hoz most hozta meg April 25, 2025 at 9:52 AM, Mr.Miti (미티) FA : Press 7-hez is úton van April 25, 2025 at 9:52 AM, Szarka Adrián : Köszönöm April 25, 2025 at 9:58 AM, Karina Lyzanets : Nem jönnek a tálcák az Slitt Cathode 2-3 re April 25, 2025 at 9:58 AM, Karina Lyzanets : Kérek nézzetek meg April 25, 2025 at 9:58 AM, Karina Lyzanets : Köszönöm szépen April 25, 2025 at 9:59 AM, Mr.Miti (미티) FA : Mindjart mennek most lett kész a daru April 25, 2025 at 10:10 AM, 김대호 (Kim Dae Ho) : 양극 공트레이 공급이 지연되고 있는데, 확인 해주실수 있을까요? 양극 재고 부족한 상황입니다. @김건희 @방혁 PM(Bang.Hyuk) FA @심찬울 April 25, 2025 at 10:13 AM, 심찬울 : 창고에서 빠지고있습니다. 잠시만 기다려주시먄 감사하겠습니다 April 25, 2025 at 10:14 AM, 김대호 (Kim Dae Ho) : 감사합니다! April 25, 2025 at 11:06 AM, Vlad Danilevskyi : Hello. Anode press 7 Agv Uw problem. Thanks April 25, 2025 at 11:15 AM, Sazzad Bhai SKon : LR received at 11.02, roll is on the way. AGV 23 will come. April 25, 2025 at 11:22 AM, adambenczik : Solved April 25, 2025 at 11:50 AM, adambenczik : Gondok vannak a katód reel raktárban, egy darabig nem nagyon fognak jönni üres tálcák. Már rajta vagyunk mi is és koreai csapat is az ügyön April 25, 2025 at 12:57 PM, Karina Lyzanets : Sziasztok! Az Cathode oldalon konvejor pálya meg állt Valaki tud segíteni? Köszi April 25, 2025 at 1:27 PM, Szarka Adrián : @Mr.Miti (미티) FA anod Slitt 2 gépen a letolo karon levő robotnal el van szakadva a gumi szigetelés kb 2 hónapja jeleztem egy másik muszaknal. Te tudsz róla ? Vagy intézes alatt van ? April 25, 2025 at 1:27 PM, Mr.Miti (미티) FA : Köszönöm az infót. Eszek aztán megyek April 25, 2025 at 1:28 PM, Mr.Miti (미티) FA : De gondolom már tudunk róla April 25, 2025 at 1:28 PM, Szarka Adrián : Jó étvágyat köszönöm szépen April 25, 2025 at 1:28 PM, Szarka Adrián : Egyik fa kollégának mondtam hogy az összes robot karon el van szakadva az a gumi tömítés 😢😢😢😢 April 25, 2025 at 1:29 PM, Skwarek Tibor : Nekem mondtad. Én továbbítottam a műszakvezetőmnek az infot. April 25, 2025 at 1:31 PM, Szarka Adrián : Akkor köszönöm szépen. Az egyik robot karon már lóg le akkor inkább le kéne szedni be ne essen olyan helyre hogy utánna megszórul vág valami nagy baj legyen. April 25, 2025 at 1:33 PM, Skwarek Tibor : Igazán nincs mit. April 25, 2025 at 1:41 PM, Karina Lyzanets : Slitt Cathode 1-2-3 nincsenek tálcák Köszönöm szépen April 25, 2025 at 1:41 PM, Karina Lyzanets : Mindhárom gép leállt emiatt April 25, 2025 at 1:42 PM, Szeitz Flórián : Légyszives ha lehet gyors javításàt , mivel kevés a reel stock készlet és a Notching is leáll. April 25, 2025 at 1:42 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 트레이 공급이 안되고있습니다. 양극 슬리팅 설비 전체 가동 못하고있습니다. April 25, 2025 at 1:43 PM, 김대호 (Kim Dae Ho) : @김건희 @KIM SEYEON [김세연]_FA April 25, 2025 at 1:43 PM, Mr.Miti (미티) FA : C51-et javítják ezért nincs reel tálca. April 25, 2025 at 1:49 PM, Mr.Miti (미티) FA : A most indult vissza a c51. Kis türelem és mennek a tálcák April 25, 2025 at 1:58 PM, Mr.Miti (미티) FA : És megint áll a raktár 🥸 April 25, 2025 at 2:01 PM, duzzaman Md (MCS) : @FA Please check E0STK002_C01 TRAVEL DRIVER ERROR E0STKA32_C01 SCP Main power CP trip April 25, 2025 at 2:07 PM, Mr.Miti (미티) FA : Technicans working on it April 25, 2025 at 3:02 PM, 김민수 left this chatroom. April 25, 2025 at 3:56 PM, Kurgya Attila : Anod roll raktárhoz kérek segítséget. 1es raktár, a daru kiállt hibára. Köszi April 25, 2025 at 4:01 PM, adambenczik : Kész April 25, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+2/12+1 Tech, 1Sl Overtime(2): Novák Zoltán, Zsurbej Zsolt Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Zsurbej Zsolt --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Novák Zoltán --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása vált April 25, 2025 at 6:39 PM, 김대호 (Kim Dae Ho) : Please check the alarm for Cathode sliter 5 April 25, 2025 at 6:44 PM, Pálosi Róbert : Solved April 25, 2025 at 7:04 PM, Nagy Dávid 4 : Katod press 2 U/W 5 számú agv kiált hibára help help köszönöm szépen April 25, 2025 at 7:24 PM, Szücs Géza FT-B : @Pálosi Róbert @Böröcz Tamás légyszives a CNVC51et nézzétek meg April 25, 2025 at 7:27 PM, Pálosi Róbert : Oks April 25, 2025 at 7:29 PM, Szücs Géza FT-B : AN Slitt3 TR hiba April 25, 2025 at 7:30 PM, Böröcz Tamás : Vágsi April 25, 2025 at 7:30 PM, Nagy Dávid 4 : Anod slit 3 robot problem help help help köszönöm szépen April 25, 2025 at 8:36 PM, Nagy Dávid 4 : press 1 r/w robot hiba help help köszönöm szépen April 25, 2025 at 8:38 PM, Rácz Dániel / FA : Úton April 25, 2025 at 9:01 PM, Viktoriia Hleba : Conveer cathode 3 slitter stop . April 25, 2025 at 9:02 PM, Czeilinger Krisztián : Megyünk April 25, 2025 at 9:03 PM, Nagy Dávid 4 : Anod slitt 2 konvejor megált help help köszönöm szépen April 25, 2025 at 9:04 PM, Rácz Dániel / FA : Úton April 25, 2025 at 9:04 PM, Czeilinger Krisztián : Megyünk. April 25, 2025 at 9:05 PM, Nagy Dávid 4 : Anod slitt 2 robot is megált help help köszönöm szépen April 25, 2025 at 9:06 PM, Rácz Dániel / FA : This message was deleted. April 25, 2025 at 9:28 PM, Viktoriia Hleba : 2 slitter cathode nincs tálca . April 25, 2025 at 9:29 PM, Rácz Dániel / FA : C51-52 es raktár nagyon le van terhelve feladattal. April 25, 2025 at 10:25 PM, Nagy Dávid 4 : Anod press 8 robot PNT AGV POS X-AXIS ERROR help help köszönöm szépen April 25, 2025 at 10:37 PM, Pálosi Róbert : Oks April 25, 2025 at 10:38 PM, Viktoriia Hleba : Conveer cathode 1 slitter stop . April 25, 2025 at 10:50 PM, Pálosi Róbert : Solved April 25, 2025 at 11:21 PM, Erik Gerzsenyi : Ezzel sikerult valamit csinalni? April 25, 2025 at 11:21 PM, Erik Gerzsenyi : Azota all ugyan ugy a gep April 26, 2025 at 12:06 AM April 26, 2025 at 12:06 AM, Szücs Géza FT-B : légyszi nézzenek rá a termeléses katbantartó technikus kollégák, hátha találnak valamit. A TR nem ír hibát, a hibaüzenet termeléses gépen jelenik meg. April 26, 2025 at 12:10 AM, Böröcz Tamás : Deviation_X Axis: 107.7 April 26, 2025 at 12:10 AM, Böröcz Tamás : Bármit is jelentsen April 26, 2025 at 12:12 AM, Böröcz Tamás : Ugyan ez a press 1en -1.7 3on 2.2 April 26, 2025 at 12:21 AM, Erik Gerzsenyi : Mindjart raneznek April 26, 2025 at 1:36 AM, Viktoriia Hleba : 2 slitter cathode nincs tálca April 26, 2025 at 1:38 AM, Shahbaz 샤바즈 MCS/RTD : CA reel trays are on the way April 26, 2025 at 1:39 AM, Rácz Dániel / FA : Mennek csak lassan April 26, 2025 at 1:41 AM, Rácz Dániel / FA : Nagyon sok feladat van a Ca51-Ca52-ben. April 26, 2025 at 7:54 AM, Karina Lyzanets : Sziasztok) Slitt Cathode 1 nincs AGV 20 perc April 26, 2025 at 7:54 AM, Karina Lyzanets : Köszi szépen April 26, 2025 at 7:55 AM, Mr.Miti (미티) FA : Úton van az agv April 26, 2025 at 7:55 AM, Mr.Miti (미티) FA : Emoticons April 26, 2025 at 7:57 AM, adambenczik : Útvan voltak a sárga bobinos raklapok katód press 2 mögött April 26, 2025 at 8:23 AM, adambenczik : @Karina Lyzanets Cathode Slitt 1-re kicsit késni fog az AGV, kis türelmet kérünk April 26, 2025 at 8:32 AM, Karina Lyzanets : Rendben, köszönöm szépen April 26, 2025 at 8:32 AM, adambenczik : Most érkezik April 26, 2025 at 8:54 AM, adambenczik : @Kurgya Attila van/lesz ma termelés coatingon? Fogtok használni AGV-t? April 26, 2025 at 8:55 AM, Kurgya Attila : Szia. Ma nem fogunk használni agv-t. April 26, 2025 at 8:56 AM, adambenczik : Köszönöm az infót 👍 April 26, 2025 at 9:26 AM, Szeitz Flórián : Reel raktàrba megy mindkét daru ? Nagyon Lassan jönnek a tálcàk. April 26, 2025 at 9:27 AM, Mr.Miti (미티) FA : Nem a C51 áll jelenleg April 26, 2025 at 9:27 AM, Mohammad Amir : Currently E0STKC51 is OOS and under maintenance that's why you are witnessing delay. Thank you! April 26, 2025 at 9:28 AM, 김대호 (Kim Dae Ho) : When will it be checked? April 26, 2025 at 9:28 AM, Mohammad Amir : There are Several jobs from STKC52 ,if you need empty trays urgently please inform me ,I will give priorities to Empty trays. Thank you very much! April 26, 2025 at 9:29 AM, Mr.Miti (미티) FA : Yes April 26, 2025 at 9:31 AM, Szeitz Flórián : Nagyon szükség van az üres tàlcàkra, mivel kevés a reel készlet a raktárba. April 26, 2025 at 9:32 AM, Mr.Miti (미티) FA : Értem. Ettől nem fog előbb megoldódni a probléma. Rajta vagyunk April 26, 2025 at 9:32 AM, Mohammad Amir : Okay I am giving priorities to Empty trays,soon you will start receiving empty trays soon. After E0STKC51 will be repaired speed will increase more. Thank you very much! April 26, 2025 at 9:34 AM, Mohammad Amir : Empty trays have started to arrive ✅. Thank you very much! April 26, 2025 at 9:44 AM, Szeitz Flórián : Katód Slitt 2 re tudnàtok jönni köszönöm April 26, 2025 at 9:48 AM, Mr.Miti (미티) FA : Ca reel vissza indult April 26, 2025 at 10:18 AM, 김대호 (Kim Dae Ho) : 금일 이재기 담당자분 계신가요?? 전 일 음극 프레스 8호기에서 트렌스퍼 롤 찍힘 발생되어 확인 필요합니다. 설비 Plc 분 지금 음극 프레스 8호기에 대응중인데, 이재기쪽 담당자분 지원요청드립니다. April 26, 2025 at 10:20 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 확인 부탁드립니다. April 26, 2025 at 10:22 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKC33_C01 there is Travel Lag Error and it is blocking tranfer for Slitter -3 CA. Thank you very much! April 26, 2025 at 10:24 AM, 방혁 PM(Bang.Hyuk) FA : 저랑 연락했습니다! April 26, 2025 at 10:32 AM, Mr.Miti (미티) FA : @Mohammad Amir Hello! Please direct empty reel trays from C52 to the slitt coveyor April 26, 2025 at 10:33 AM, Mohammad Amir : Hello, Sure working on it. April 26, 2025 at 10:33 AM, Mr.Miti (미티) FA : Thank you very much! April 26, 2025 at 10:33 AM, Mohammad Amir : You are welcome! April 26, 2025 at 11:49 AM, Mohammad Amir : Please inform me when I should stop directing the empty trays from C52 and make the process normal. Thank you very much! April 26, 2025 at 11:53 AM, Mr.Miti (미티) FA : Let's try to see how the warehouse automatically supplies the slit conveyor. If it is not suitable I will notify you. April 26, 2025 at 11:53 AM, Mohammad Amir : Alright, Thank you very much! Please let me know if you need anymore assistance. April 26, 2025 at 11:55 AM, Mr.Miti (미티) FA : Thank you so much! April 26, 2025 at 11:55 AM, Mohammad Amir : You are welcome! April 26, 2025 at 12:35 PM, Oleksii Krasnoshchok : Hello, problem with transfer anode press 1 r/w April 26, 2025 at 1:34 PM, Karina Lyzanets : Slitt Cathode 1-2 nincs AGV 20-25 perc April 26, 2025 at 1:35 PM, Karina Lyzanets : Kérek nézzetek meg, köszi April 26, 2025 at 1:36 PM, Mohammad Amir : Checking April 26, 2025 at 1:37 PM, Mohammad Amir : LR received successfully at 12:44 for Slitter Cathode -1 and for Slitter Cathode -2 at 12:24 . However currently there is no material available to transfer as soon as material will be available jobs will be created. I am monitoring. Thank you very much! April 26, 2025 at 1:46 PM, Karina Lyzanets : I thank you very much too April 26, 2025 at 1:46 PM, Mohammad Amir : You are welcome! April 26, 2025 at 1:58 PM, Szeitz Flórián : MES szerint mèg kellene raktárba lenni anyagnak. April 26, 2025 at 1:59 PM, Mr.Miti (미티) FA : A MES és az MCS nem egyezik. April 26, 2025 at 1:59 PM, Mr.Miti (미티) FA : Azért nem tudja az anyagot kivinni mert az RTD-ben nem szerepel az adott Carrier ID April 26, 2025 at 2:00 PM, Mohammad Amir : Yes there are material as i checked 46 for Slitter Cathode -2 and -1 however it is getting filtered because it is not appropriate for slitting. Thank you very much! April 26, 2025 at 2:46 PM, Mohammad Amir : @FA @adambenczik Please check E0CNVA51_06_049,85,87,67,60 ,59 there is INV-01 Run Time over error and it is blocking empty trays delivery and recovery of materials. Thank you very much! April 26, 2025 at 2:47 PM, adambenczik : I see, but fire curtain is down, I can't access the conveyor April 26, 2025 at 2:47 PM, Mohammad Amir : Okay, I understand. Thank you very much! April 26, 2025 at 3:03 PM, Szeitz Flórián : Anód Slitt megállt a Conveyor pálya. Nem jönnek a tálcàk légyszives nézétek meg. Köszönöm April 26, 2025 at 3:03 PM, Mr.Miti (미티) FA : Ugyan ez CA oldalt April 26, 2025 at 3:03 PM, Mr.Miti (미티) FA : De azt már vissza indítottuk April 26, 2025 at 3:04 PM, Szeitz Flórián : Anód Roll raktàrba 3as ès 23as AGV akadàlyozza egymást ,így megálltak. April 26, 2025 at 3:04 PM, Mr.Miti (미티) FA : Nézem April 26, 2025 at 3:05 PM, Mr.Miti (미티) FA : Sok e d April 26, 2025 at 3:05 PM, Mr.Miti (미티) FA : Solved April 26, 2025 at 3:18 PM, Szeitz Flórián : Katód Slitt 4hez ide tudnàtok jönni. Köszönöm April 26, 2025 at 3:19 PM, Szeitz Flórián : Megoldva. April 26, 2025 at 3:19 PM, Mr.Miti (미티) FA : Ügyes vagy! April 26, 2025 at 3:25 PM, Oleksii Krasnoshchok : Hello in anode press 2 stopped transfer , and a plug of 3 Agv formed April 26, 2025 at 3:58 PM, Szeitz Flórián : Jelezetek ,ha javítva. April 26, 2025 at 3:58 PM, adambenczik : Megoldva April 26, 2025 at 4:31 PM, Mohammad Amir : @adambenczik Please check E0CNVC51_08_044 it is OOS because it is in Manual mode and because of this issue empty trays delivery has stopped. Thank you! April 26, 2025 at 4:47 PM, adambenczik : Solved April 26, 2025 at 4:47 PM, Mohammad Amir : Thank you very much! April 26, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 26, 2025 at 6:16 PM, Nagy Dávid 4 : Anod press 6 U/W 1-es agv kiált hibára help help köszönöm szépen April 26, 2025 at 6:17 PM, Rácz Dániel / FA : Jövök April 26, 2025 at 6:22 PM, Rácz Dániel / FA : This message was deleted. April 26, 2025 at 6:24 PM, Pintér Gábor : Sziasztok szeretnénk segítséget kérni Cathode Jumbo Roll raktárba az egyes Stockerhez srácok itt lesznek April 26, 2025 at 6:25 PM, Rácz Dániel / FA : Mindjárt ott vagyok April 26, 2025 at 6:27 PM, Rácz Dániel / FA : Kész April 26, 2025 at 6:33 PM, Szücs Géza FT-B : kész, operátori mulasztás volt. manuális kocsi féke nem volt bekapcsolva April 26, 2025 at 8:10 PM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Segítséget kértek a porra. Lehet hogy váltásra nem érek vissza. April 26, 2025 at 8:18 PM, Czeilinger Krisztián : Rendben van. Majd le vonják a gázsidbol. April 26, 2025 at 8:18 PM, Czeilinger Krisztián : Rendben van. April 26, 2025 at 10:17 PM, Pálosi Róbert : Hali! Ide tudnál jönni a KAtód 32-re? April 26, 2025 at 10:17 PM, Pálosi Róbert : Kéne egy kis help! April 26, 2025 at 10:21 PM, Szücs Géza FT-B : megyek April 26, 2025 at 10:23 PM, Pálosi Róbert : Oks! Köszi! April 26, 2025 at 10:51 PM, Nagy Dávid 4 : Anod press 1, nincs AGV 15 perc, u/w help help köszönöm szépen April 26, 2025 at 10:54 PM, Nagy Dávid 4 : Katod bocsi April 26, 2025 at 10:59 PM, Shahbaz 샤바즈 MCS/RTD : @FA The AGV#21 is in error state while loading at E0STKC32_P01. Are you ok it? April 26, 2025 at 11:07 PM, Rácz Dániel / FA : Már úton van, raktárban volt egy kis adat hiba. April 26, 2025 at 11:07 PM, Nagy Dávid 4 : Köszönöm szépen (thumbsup) April 26, 2025 at 11:07 PM, Rácz Dániel / FA : Solved thx April 26, 2025 at 11:41 PM, Nagy Dávid 4 : Katod press 3 gépnél 21 számú agv kiált hibára help help köszönöm szépen April 26, 2025 at 11:42 PM, Rácz Dániel / FA : Jövök April 26, 2025 at 11:48 PM, Rácz Dániel / FA : Kész April 27, 2025 at 12:11 AM April 27, 2025 at 12:11 AM, Rácz Dániel / FA : Katód slitt 2 nincs tàlca 26 perc April 27, 2025 at 12:11 AM, Rácz Dániel / FA : C51-es daru folyamatosan travel driver error megáll April 27, 2025 at 12:12 AM, Szücs Géza FT-B : nem reseteli magát? April 27, 2025 at 12:13 AM, Rácz Dániel / FA : Többször April 27, 2025 at 12:13 AM, Szücs Géza FT-B : @ön. nyer. @ April 27, 2025 at 12:14 AM, Rácz Dániel / FA : Mr@ mr acs April 27, 2025 at 12:16 AM, Rácz Dániel / FA : Lassan, de érkeznek az üres orsók April 27, 2025 at 1:27 AM, Viktoriia Hleba : 2 slitter cathode nincs tálca :( April 27, 2025 at 1:28 AM, Czeilinger Krisztián : Megyünk. April 27, 2025 at 2:01 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Menjetek szünetre, bent vagyok. April 27, 2025 at 2:03 AM, Rácz Dániel / FA : CA 51-52-es raktár nagyon le van terhelve, ez miatt jönnek lassan az üres reel tálcák. April 27, 2025 at 2:04 AM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Please checking why 90 priority the E0STKC51 crane orders ?! Thank you. April 27, 2025 at 2:06 AM, Rácz Dániel / FA : Because the CA Slitt machines very slowly goin the empty tray’s. April 27, 2025 at 2:08 AM, Shahbaz 샤바즈 MCS/RTD : You mean from slitter to stocker? April 27, 2025 at 2:22 AM, Rácz Dániel / FA : on the contrary April 27, 2025 at 2:26 AM, Rácz Dániel / FA : *coming April 27, 2025 at 2:30 AM, Shahbaz 샤바즈 MCS/RTD : The RTD set priority for CA reel trays in slitting: STK to P07 = 50 Slitter 1,2 to STK = 90 Slitter 3 to STK = 50 Until someone update it. April 27, 2025 at 2:31 AM, Rácz Dániel / FA : Thank you for the information, Sir. 🫡 April 27, 2025 at 2:33 AM, Rácz Dániel / FA : Most már van egy pár darab üres reel tálca. April 27, 2025 at 2:41 AM, Rácz Dániel / FA : Ca slitteken nem sokára megint elfog fogyni az üres reel tálca 😞 April 27, 2025 at 2:50 AM, Szücs Géza FT-B : és ha ürítjük a teli tálcákat? 🤣 April 27, 2025 at 2:50 AM, Rácz Dániel / FA : És azt hogyan kell ? 😅 April 27, 2025 at 2:51 AM, Rácz Dániel / FA : Manual job-al nem tudunk kiküldeni nekik üres tálcákat közvetlenül ? April 27, 2025 at 2:53 AM, Szücs Géza FT-B : de egy ideig üent ez is autoba.... csak.... April 27, 2025 at 2:53 AM, Szücs Géza FT-B : mind a 2 STK roskadásig voét orderrel 1 órával ezelőtt amikor néztem April 27, 2025 at 5:31 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián CNVC51et nézzétek meg légyszives April 27, 2025 at 5:32 AM, Szücs Géza FT-B : elakadt tele reel tálca April 27, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— April 27, 2025 at 7:27 AM, KIM SEYEON [김세연]_FA : @서지원 @TP조장님 @COATER SL AGV needs AGV route. Please be aware that there should be no obstacles on the AGV route. Please take all obstacles on the AGV route before production and after production too. Thanks. April 27, 2025 at 7:58 AM, Mohammad Amir : @FA @adambenczik Please check E0CNVA51_06_152/151 there is INV-01 Runtime Over error. Thank you very much! April 27, 2025 at 8:01 AM, adambenczik : Solved April 27, 2025 at 8:02 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 8:12 AM, Mohammad Amir : @adambenczik Please check E0CNVA51_P04 there is INV-01 Run Time over error and because of this there is a queue of recovery materials on the CNVA51. Thank you very much! April 27, 2025 at 8:25 AM, adambenczik : Solved April 27, 2025 at 8:26 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 10:24 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 1-2-3 Nagyon lassan érkeznek a tálcák, nézzetek meg kérek Köszönöm szépen April 27, 2025 at 10:26 AM, Mohammad Amir : Hello , Due to maintenance of E0STKC51 ,you are witnessing delay. Please inform me if there is shortages of Empty trays for production,I will give priority from STKC52. Thank you very much! April 27, 2025 at 10:33 AM, Mr.Miti (미티) FA : Please give prioritás than. 😇 April 27, 2025 at 10:33 AM, Mohammad Amir : Alright, working on it. Thank you very much! April 27, 2025 at 10:33 AM, Mr.Miti (미티) FA : Thank you very much! April 27, 2025 at 10:34 AM, Mohammad Amir : You are welcome! April 27, 2025 at 10:36 AM, Mohammad Amir : @Mr.Miti (미티) FA @Karina Lyzanets For your information:- Empty CA trays have started to arrive ✅. Please inform me when you will have enough trays ,i will make the process normal. Thank you very much! April 27, 2025 at 10:37 AM, Mr.Miti (미티) FA : Thank you very much! April 27, 2025 at 10:37 AM, Mohammad Amir : You are welcome! Feel free to reach out to me if you have any other issues. April 27, 2025 at 10:42 AM, Mohammad Amir : @adambenczik Please check E0STKA31_C01 there is Light Curtain error and because of this two jobs are pending. Thank you very much! April 27, 2025 at 10:51 AM, adambenczik : I'm here with korean help April 27, 2025 at 10:52 AM, Mohammad Amir : Thank you very much for the information! April 27, 2025 at 11:04 AM, adambenczik : There was a communication problem between the machines, korean PLC proffesional is working on it April 27, 2025 at 11:12 AM, Mr.Miti (미티) FA : Solved. April 27, 2025 at 11:38 AM, Szeitz Flórián : sziasztok! Anód Slitt konveyor pályán torlódnak a reel -ek. Megnéznétek? Köszönöm April 27, 2025 at 11:39 AM, gutenkunstabelzoltan : Elvileg mar jo April 27, 2025 at 11:41 AM, gutenkunstabelzoltan : Gyakorlatban meg a fasztudja… hiba nincs de all minden April 27, 2025 at 11:46 AM, gutenkunstabelzoltan : A darut turták a kollegak April 27, 2025 at 1:32 PM, Mohammad Amir : @gutenkunstabelzoltan Please check E0CNVA51 -06-028 there is Port interface Error -1 since 12:44. Thank you! April 27, 2025 at 1:37 PM, gutenkunstabelzoltan : We are working on se cv problem we need time April 27, 2025 at 1:37 PM, Mohammad Amir : Thank you very much for the information! April 27, 2025 at 1:37 PM, gutenkunstabelzoltan : This message was deleted. April 27, 2025 at 2:33 PM, Kurgya Attila : Sziasztok Gyertek légyszi anod 4es sorhoz. Van egy agv ami nagyon útban van. Köszi April 27, 2025 at 2:38 PM, Mr.Miti (미티) FA : Mondasz egy számot róla? April 27, 2025 at 2:39 PM, Mr.Miti (미티) FA : Látom April 27, 2025 at 6:05 PM, Rácz Dániel / FA : AN 7 es AGV-t akadályozta egy kézi béke a mozgásban. Kész April 27, 2025 at 6:06 PM, Rácz Dániel / FA : AN 1 es AGV megállt az AN Press 6 UW kezelőpanel mellett. Kész April 27, 2025 at 6:07 PM, Csanálosi Gábor FA : 🐸 April 27, 2025 at 6:10 PM, Rácz Dániel / FA : AN 33 as daru megállt. A jumbo roll fólia nem megfelően volt leragasztva. Kész April 27, 2025 at 6:13 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+1/12 Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Fabriczius Gergely, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő April 27, 2025 at 6:14 PM, Rácz Dániel / FA : CA 31 es daru villa kint maradt. Kész April 27, 2025 at 6:26 PM, Rácz Dániel / FA : CA 35 ös transzfer nem tette le az AGV re a jumbo rollt. Kész April 27, 2025 at 6:51 PM, Viktoriia Hleba : 1 slitter cathode nincs AGV - 15 perc . April 27, 2025 at 6:53 PM, Rácz Dániel / FA : @mcs April 27, 2025 at 6:55 PM, VK (mcs) : There is no LR for slitter 1 Last LR was at 13:39 tat reply was: no available material. April 27, 2025 at 6:55 PM, Rácz Dániel / FA : Thx April 27, 2025 at 6:56 PM, Rácz Dániel / FA : AN 51 es CNV 06_123 CV_15 diverter második alkalommal maradt fent. April 27, 2025 at 6:57 PM, Szücs Géza FT-B : tray detect senzort kérlek állítsd magasabb pozícióba, hogy a divertert ne érzékelje tálcaként. de várj meg vele, mert fényképezem April 27, 2025 at 6:57 PM, Szücs Géza FT-B : úton vagyok April 27, 2025 at 6:58 PM, Rácz Dániel / FA : Oksa hozunk szerszàmot addig April 27, 2025 at 7:01 PM, Erik Gerzsenyi : Sziasztok Anod slitt 2-re nem nagyon jonnek be a talcak pedig itt sorakoznak a conveyorpalyan April 27, 2025 at 7:01 PM, Erik Gerzsenyi : Nezzetek ra kerlek mert nagyon alacsony a cellakeszlet a fordra April 27, 2025 at 7:01 PM, Erik Gerzsenyi : Koszi April 27, 2025 at 7:02 PM, Rácz Dániel / FA : Dolgozunk a hibán. Jelezzük ha kész. April 27, 2025 at 7:05 PM, Viktoriia Hleba : 2-3 slitter cathode nincs tálca :( April 27, 2025 at 7:06 PM, Czeilinger Krisztián : This message was deleted. April 27, 2025 at 7:07 PM, Erik Gerzsenyi : Gyerekek mi lesz itt, ha elindulnak a 4-es sori slittek is?🤣🤣 April 27, 2025 at 7:08 PM, Rácz Dániel / FA : CA oldalon lassan de érkeznek a tálcàk, a raktárak nagyon levannak terhelve. April 27, 2025 at 7:08 PM, Rácz Dániel / FA : Jó kérdés April 27, 2025 at 7:53 PM, VK (mcs) : @FA Please check Cathode conveyor C51 (8043) April 27, 2025 at 7:55 PM, Csanálosi Gábor FA : LTC1356 is there April 27, 2025 at 7:57 PM, VK (mcs) : Yes . carrier transferred from manual port as empty-empty but after passing port 6 conveyor then sensor realised as full. April 27, 2025 at 7:57 PM, Rácz Dániel / FA : @Szücs Géza FT-B please help 🙏 April 27, 2025 at 8:02 PM, Szücs Géza FT-B : E0STKA33 hibáit hagyátok figyelmen kívül. A raktár leürítése folyamatban van, utána manuálban lesz. April 27, 2025 at 8:02 PM, Csanálosi Gábor FA : Physically thats LTC0784 April 27, 2025 at 8:03 PM, Szücs Géza FT-B : ome April 27, 2025 at 8:03 PM, Szücs Géza FT-B : w April 27, 2025 at 8:03 PM, Rácz Dániel / FA : Thx April 27, 2025 at 8:09 PM, VK (mcs) : @이주봉PM LEE JUBONG(FA) Can you please check upper case! LTC0784 has destination to notching CNV but according to FA technician it’s in CNV 51 ! In MCS location is still inside STK C51 There is no any info about transition. April 27, 2025 at 8:15 PM, 이주봉PM LEE JUBONG(FA) : Okay!! April 27, 2025 at 8:19 PM, Csanálosi Gábor FA : Can you refresh the position of LTC0784 in mcs please? April 27, 2025 at 8:22 PM, Szücs Géza FT-B : This message was deleted. April 27, 2025 at 8:23 PM, Szücs Géza FT-B : bovs nem, várj April 27, 2025 at 8:24 PM, VK (mcs) : Modified April 27, 2025 at 8:25 PM, Szücs Géza FT-B : STKC51 0200207 sheft - emty sheft April 27, 2025 at 8:25 PM, VK (mcs) : Shelf is empty ? Please modify SCS April 27, 2025 at 8:25 PM, Csanálosi Gábor FA : Tried, cant April 27, 2025 at 8:27 PM, VK (mcs) : Please check this as well locations Cathode Reel STK C51 LTC0387 (0201004) LTC0392 (0101104) LTC0784 (0200207) LTC1794 (0101005) These carrier’s job aborted by storage but still shelf status is ( retrieve reserved ) April 27, 2025 at 8:30 PM, VK (mcs) : Can you please try again April 27, 2025 at 8:30 PM, Csanálosi Gábor FA : Success April 27, 2025 at 8:40 PM, VK (mcs) : Please also check mentioned carriers LTC0387 and LTC0392 Others already fixed. Thx April 27, 2025 at 8:41 PM, Noémi (소미) : Sziasztok, Az E0STKA33 raktár az éjszaka folyamán nem lesz használatban (Out of service állapotban lesz). @이주봉PM LEE JUBONG(FA) April 27, 2025 at 9:04 PM, Erik Gerzsenyi : Sziasztok Katod slitt 1-2-3 is áll jelenleg mert nem jon üres tálca. Megneznetek mi lehet a gond? April 27, 2025 at 9:05 PM, Pálosi Róbert : Dolgozunk rajta April 27, 2025 at 9:21 PM, Rácz Dániel / FA : @VK (mcs) please help me April 27, 2025 at 9:22 PM, Rácz Dániel / FA : E0CNVC51_08_047 why not moving ? April 27, 2025 at 9:25 PM, VK (mcs) : Job terminated by OP action and now there is no job for LTC0043 April 27, 2025 at 9:28 PM, Szücs Géza FT-B : need to go STKC51_Z01 April 27, 2025 at 9:29 PM, VK (mcs) : Do you want me to create job to that destination? April 27, 2025 at 9:31 PM, Rácz Dániel / FA : Yes please April 27, 2025 at 9:34 PM, VK (mcs) : Job created , but isn’t it on upper conveyor? April 27, 2025 at 9:36 PM, Rácz Dániel / FA : I dont know why not moving April 27, 2025 at 9:38 PM, VK (mcs) : MCS side everything is normal and reply is successful April 27, 2025 at 9:38 PM, Rácz Dániel / FA : Thank you April 27, 2025 at 9:38 PM, Csanálosi Gábor FA : We pushed into lift manually April 27, 2025 at 9:39 PM, Rácz Dániel / FA : May be need LR to the lift 2 April 27, 2025 at 9:42 PM, Rácz Dániel / FA : A félszinten az OP panel szerint nincs a liftnek sem LR sem UL utasítása April 27, 2025 at 9:42 PM, VK (mcs) : Isn’t better to send it to STK C52? April 27, 2025 at 9:43 PM, Rácz Dániel / FA : Try it April 27, 2025 at 9:53 PM, Rácz Dániel / FA : Sajnos a CNVC51 re még mindig nincs megoldás, jeleztem másik csoportban hogy koreai segítségre lenne szükségünk. April 27, 2025 at 10:36 PM, Rácz Dániel / FA : EA1P073F41684 April 27, 2025 at 10:41 PM, Rácz Dániel / FA : @VK (mcs) i am hiw to create the RBA number ? April 27, 2025 at 10:41 PM, Rácz Dániel / FA : E0STKA31_P01 April 27, 2025 at 10:43 PM, VK (mcs) : I am sorry but I didn't get it? April 27, 2025 at 10:44 PM, VK (mcs) : Do you want to modify SCS? April 27, 2025 at 10:44 PM, Rácz Dániel / FA : Yes please April 27, 2025 at 10:46 PM, VK (mcs) : You can modify it by using SCS software with the modify section or use BCR manually April 27, 2025 at 10:46 PM, Rácz Dániel / FA : @Csanálosi Gábor FA April 27, 2025 at 10:46 PM, Rácz Dániel / FA : This is the LOT ID April 27, 2025 at 10:46 PM, Csanálosi Gábor FA : Trying, April 27, 2025 at 10:53 PM, Csanálosi Gábor FA : Not working, i cant. It say saved, but than the data isnt there April 27, 2025 at 10:57 PM, VK (mcs) : Unfortunately, I haven't permission to modify SCS. April 27, 2025 at 10:59 PM, Csanálosi Gábor FA : I dont even know is this goint to stk, or from stk? No requests. The port is in out mode, and cant switch. April 27, 2025 at 11:00 PM, VK (mcs) : Is Carrier id RBA3893? April 27, 2025 at 11:06 PM, VK (mcs) : If yes then Job created from STK 33 to STK 35 but on the AGV 12 job cancelled by OP action and then created to STK 31-P01 April 27, 2025 at 11:12 PM, Csanálosi Gábor FA : I cant see carrier id, only that lot id April 27, 2025 at 11:14 PM, VK (mcs) : According to RTD LOT belongs to RBA3893 April 27, 2025 at 11:15 PM, Csanálosi Gábor FA : The scs page accepted the carrier id, so there it is. April 27, 2025 at 11:15 PM, Szücs Géza FT-B : ACS-ben meg tudod nézni, hogy a 12es AGV mit vett ki az A33ból April 27, 2025 at 11:16 PM, Szücs Géza FT-B : log / order April 27, 2025 at 11:17 PM, Csanálosi Gábor FA : Now you can make a job for it April 27, 2025 at 11:24 PM, VK (mcs) : I modified location in MCS But if I create a job it will not work because of direction is out April 27, 2025 at 11:26 PM, Csanálosi Gábor FA : Even if you send it to A35? I cant switch direction. April 27, 2025 at 11:27 PM, VK (mcs) : Okay I will transfer it to A35 April 27, 2025 at 11:31 PM, Csanálosi Gábor FA : Thank you! April 27, 2025 at 11:34 PM, Erik Gerzsenyi : Anod slitt 2 re ismet nem jonnek talcak csak allnak a conveyor palyan April 27, 2025 at 11:34 PM, Erik Gerzsenyi : Raneztek legyszives? April 27, 2025 at 11:34 PM, Nagy Dávid 4 : Anod slitt 2 nincsen tálca help help köszönöm szépen April 27, 2025 at 11:37 PM, VK (mcs) : Sadly it doesn't work, reply code is 3 It means one parameter is invalid. April 27, 2025 at 11:37 PM, Csanálosi Gábor FA : Hiba nincs, szép lassan csorognak. April 27, 2025 at 11:44 PM, Csanálosi Gábor FA : This is for me? April 27, 2025 at 11:52 PM, VK (mcs) : Yes, there is something wrong and it should be checked physically. April 27, 2025 at 11:52 PM, Csanálosi Gábor FA : Or maybe i put wrong data in. Can you retry pls? April 27, 2025 at 11:54 PM, Nagy Dávid 4 : Press 7 anod r/w problem AGV help help köszönöm szépen April 28, 2025 at 12:00 AM April 28, 2025 at 12:00 AM, Czeilinger Krisztián : A press 7-en r/w nincs AGV probléma. April 28, 2025 at 12:00 AM, Viktoriia Hleba : 3 slitter cathode convejor stop. April 28, 2025 at 12:06 AM, Czeilinger Krisztián : Folyamatban van a javítás. April 28, 2025 at 12:29 AM, Nagy Dávid 4 : Press 7 anod r/w problem AGV help help köszönöm szépen April 28, 2025 at 12:30 AM, Nagy Dávid 4 : Pozíció probléma még mindig fent áll April 28, 2025 at 12:30 AM, Czeilinger Krisztián : Megyek. April 28, 2025 at 12:44 AM, Nagy Dávid 4 : Anod slit 2 nincs AGV 15 perc help help köszönöm szépen April 28, 2025 at 12:45 AM, VK (mcs) : AGV 22 on the way April 28, 2025 at 12:45 AM, Czeilinger Krisztián : Kész. April 28, 2025 at 12:49 AM, Czeilinger Krisztián : E1SLA020-Megérkezett a 22-számú AGV. April 28, 2025 at 1:15 AM, Rácz Dániel / FA : Ca oldal #3 AGV Coatingon lekapcsolva, mert útban van. April 28, 2025 at 1:57 AM, Csanálosi Gábor FA : AN oldal lesz az. 😅 April 28, 2025 at 2:04 AM, Rácz Dániel / FA : Bocs igazad van AN 😅 April 28, 2025 at 2:05 AM, Szücs Géza FT-B : Emoticons April 28, 2025 at 3:18 AM, Erik Gerzsenyi : Megneznetek hogy az anod slitt 3-ra miert nem jon az AGV? April 28, 2025 at 3:18 AM, Erik Gerzsenyi : Koszonom April 28, 2025 at 3:19 AM, Erik Gerzsenyi : 20 perce megkertuk mar April 28, 2025 at 3:19 AM, Rácz Dániel / FA : Nézzük is April 28, 2025 at 3:20 AM, Rácz Dániel / FA : AGV nek valami az útjában van April 28, 2025 at 3:20 AM, Rácz Dániel / FA : Kiszabadítjuk April 28, 2025 at 3:30 AM, Czeilinger Krisztián : Indulnak az üres tálcák. April 28, 2025 at 3:37 AM, Rácz Dániel / FA : @VK (mcs) Please check the E1SLA030_P01 why not coming the jumbo roll on the AGV Thank you. April 28, 2025 at 3:38 AM, VK (mcs) : No available material April 28, 2025 at 3:41 AM, VK (mcs) : @FA Please check Cathode conveyor (8046) Carrier is not moving! Thx April 28, 2025 at 3:43 AM, Rácz Dániel / FA : Thank you Sir ! 🙏 April 28, 2025 at 3:43 AM, Rácz Dániel / FA : @Erik Gerzsenyi April 28, 2025 at 3:50 AM, Rácz Dániel / FA : Katód 51 es conveyoron megint nem működik a 2 es lift, ez miatt a slitt gépeken lefognak ürülni az üres reel tálcák. Már csak a slitt 1 re van üres reel tálca. Help help April 28, 2025 at 3:52 AM, Szücs Géza FT-B : @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) April 28, 2025 at 3:53 AM, Rácz Dániel / FA : Katód 52 es ből küldök ki üreseket az a vonal működik April 28, 2025 at 4:03 AM, VK (mcs) : Hello Is Slitter Line 5th under operation tonight? We received several time LR!! April 28, 2025 at 4:06 AM, Szücs Géza FT-B : all slitt5 stopped, not manufacturing on this lines April 28, 2025 at 4:06 AM, VK (mcs) : Thank you April 28, 2025 at 6:04 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 28, 2025 at 7:46 AM, Turianytsia Olesia : A szállítószalag megállt Cathode slitt 1,2,3 April 28, 2025 at 7:47 AM, Kiss Balázs F.A. : Dolgozunk épp rajta April 28, 2025 at 7:47 AM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1,2 April 28, 2025 at 7:49 AM, Kiss Balázs F.A. : !! April 28, 2025 at 8:56 AM, Mohammad Amir : @Kiss Balázs F.A. Please check E0CNVA51 there is IPS sensor align range exceeded. Thank you very much! April 28, 2025 at 8:57 AM, 조혜근 : @FA Auto mode of anode slitter unit 5 RW Lee Jae-gi is not activated. Please check it April 28, 2025 at 9:08 AM, Somoskövy Martin : Sziasztok. Cathode 4-es roll raktárhoz szeretnék segítséget kérni. Kiállt hibára a daru. Köszönöm. April 28, 2025 at 9:08 AM, Oláh András : Mindjárt megyünk April 28, 2025 at 9:29 AM, Hári Zoltàn : Sziasztok! Legyszives a coatingon kapcsoljatok le az agv-ket és parkoljatok le velük úgy, hogy ne legyenek útban! Ma az anód és katód 4 es sorokon lesz teszt ahol nem használhatunk agv-t a jumbókat manuálisan fogjuk raktározni! Köszönöm! April 28, 2025 at 9:30 AM, Szabadi Miki : Megyünk oda azt megbeszéljük hol jo nektek April 28, 2025 at 9:50 AM, Somoskövy Martin : Anode Press 8 U/W-nél nem rakja fel a kar a rollt. Megnéznétek? Köszönöm. April 28, 2025 at 9:51 AM, Mohammad Amir : Hello, Please press UR again. Thank you! April 28, 2025 at 10:15 AM, Somoskövy Martin : Anode Slitt 4-en az 1-es R/W elvesztette a tálcaszámot. Légyszíves nézzétek meg. Köszönöm. April 28, 2025 at 10:22 AM, Oláh András : Kész 👍 April 28, 2025 at 10:24 AM, Turianytsia Olesia : R/W átvitel megszakadt anode slitt 5 April 28, 2025 at 10:24 AM, Turianytsia Olesia : Kérlek gyere ide. April 28, 2025 at 10:38 AM, Oláh András : Kész 👍 April 28, 2025 at 10:42 AM, Majláth Martin : Sziasztok! Catod slitt 5 re szeretnék segítséget kérni. Rw. Ről nem lehet elküldeni a reelt Köszi April 28, 2025 at 10:48 AM, Oláh András : Kis türelem, anod slitt 5nél ugyanezzel a problémával küzdünk April 28, 2025 at 10:54 AM, Majláth Martin : Sziasztok anod press 7 egy gyors segítségre lenne szükség Köszönöm April 28, 2025 at 11:31 AM, Szarka Adrián : Katod 4 roll raktár hoz szeretnénk segítséget kérni. Szerintem a fény függöny hiba van, mert jól nyitjuk az ajtót de le veri a darut mint ha nem jól nyitnánk. Köszönöm April 28, 2025 at 11:31 AM, Szabadi Miki : Mindjárt megyünk April 28, 2025 at 11:36 AM, Mohammad Amir : @Szabadi Miki Please check E1SLA050_P03 there is Centering Cylinder Fws error since 11:13. Thank you very much! April 28, 2025 at 11:37 AM, Szabadi Miki : Checking April 28, 2025 at 11:41 AM, Mohammad Amir : @Oláh András Please check E0STK001_C01 there is Load Collapse Error (Left)since 11:31 ,one job is pending. Thank you very much! April 28, 2025 at 11:45 AM, Szabadi Miki : Checking April 28, 2025 at 11:51 AM, 김대호 (Kim Dae Ho) : Please check the cathode sliter 4 conveyor. April 28, 2025 at 11:51 AM, Szabadi Miki : Coming April 28, 2025 at 12:15 PM, 조혜근 : 양극 슬리터 5호기 RW 2ND 트레이가 같은 자리에서 지속 에러 발생중입니다. 확인 후 조치 부탁드립니다. April 28, 2025 at 12:16 PM, 조혜근 : 임시조치 말고 재티칭 부탁드립니다 April 28, 2025 at 12:17 PM, 조혜근 : @심찬울 April 28, 2025 at 12:18 PM, 심찬울 : 확인해보겠습니다 April 28, 2025 at 12:19 PM, 조혜근 : 네 감사합니다 April 28, 2025 at 1:03 PM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVC51 _08-187 there is data loss error. Thank you very much! April 28, 2025 at 1:52 PM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 5 April 28, 2025 at 1:53 PM, Mohammad Amir : Checking April 28, 2025 at 1:53 PM, Oláh András : Kis türelem, a raktárat javítják épp. Lehet hogy a slitt4-nél is elfogynak nemsokára April 28, 2025 at 1:55 PM, Mohammad Amir : E0STKC51 was under repair. Empty trays on the way from E0STKC52,you will receive it soon ✅. Thank you! April 28, 2025 at 2:08 PM, Mohammad Amir : For your information, Empty trays have arrived for Slitter cathode -5 ✅ Thank you! April 28, 2025 at 2:09 PM, Mohammad Amir : @Oláh András Please check E0CNVC51 -08-202 there is data loss error and now it is stopping empty trays delivery to sliiter-5. Thank you very much! April 28, 2025 at 2:10 PM, Oláh András : @Szabadi Miki April 28, 2025 at 2:27 PM, Majláth Martin : Sziasztok anood roll raktárba szeretnék segítséget kérni. Köszii April 28, 2025 at 2:29 PM, Szabadi Miki : Checking April 28, 2025 at 2:30 PM, 조혜근 : @Mohammad Amir Currently, cathode slitter units 4 and 5 are working on important work, but the empty tray does not come, so we cannot operate the facility. Can you send me an empty tray first? April 28, 2025 at 2:30 PM, Szabadi Miki : Amint végzünk katod slitt 5 April 28, 2025 at 2:30 PM, Mohammad Amir : Sure Sir , Checking! April 28, 2025 at 2:30 PM, 조혜근 : Thank you April 28, 2025 at 2:31 PM, Mohammad Amir : You are welcome! April 28, 2025 at 2:32 PM, Mohammad Amir : Sir, Empty trays on the way ✅ It will arrive soon ,I have given priorities to empty trays delivery to Slitter -4&5 Cathode. I am monitoring Sir. Thank you very much! April 28, 2025 at 2:35 PM, Csicskovics Balázs : Anode press 8hoz valaki tudna jönni? April 28, 2025 at 2:36 PM, Szabadi Miki : Megyünk April 28, 2025 at 2:38 PM, Mohammad Amir : @Szabadi Miki Please check E0CNVC51_08_199-200 there is Data Loss error it is blocking way. Thank you! April 28, 2025 at 2:39 PM, Szabadi Miki : Checking April 28, 2025 at 2:39 PM, Mohammad Amir : Thank you very much! April 28, 2025 at 2:40 PM, Szabadi Miki : You are welcome April 28, 2025 at 3:21 PM, Baek Hojong(백호종)FA : @김건희 피엠님 현장에서 얘기해주신데로 음극 프레스 8호기 명일 이재기 클램프 교체작업으로 비가동 예정입니다 혹시 생산계획이 변경되면 사전에 미리 말씀해주심 참고하겠습니다 April 28, 2025 at 3:55 PM, Turianytsia Olesia : A szállítószalag nem működik anode slitt 5 April 28, 2025 at 3:55 PM, Szabadi Miki : Megyünk April 28, 2025 at 4:15 PM, 김건희 : @Baek Hojong(백호종)FA 음극 버스트런 시작하였는데 슬리터 4호기 이재기 반전기에서 멈췄습니다 바로 봐주실 분 계실까요?ㅠ April 28, 2025 at 4:16 PM, Baek Hojong(백호종)FA : 지금 갑니다 April 28, 2025 at 4:34 PM, KIM SEYEON [김세연]_FA : @Lee Junghan(이정한)_CS 매니저님 같이 확인부탁드립니다. 버스트런 중요합니다. April 28, 2025 at 4:34 PM, Lee Junghan(이정한)_CS : 네 알겠습니다. April 28, 2025 at 4:35 PM, Lee Junghan(이정한)_CS : 지금 움직이겠습니다. April 28, 2025 at 5:00 PM, Hári Zoltàn : Sziasztok! Anód 2 coater indul, szeretnénk agv-ket használni ha lehet! Köszi! April 28, 2025 at 5:01 PM, Oláh András : Megyünk April 28, 2025 at 5:10 PM, Szabadi Miki : 4db agv üzemkész April 28, 2025 at 5:45 PM, Szabadi Miki : @Mohammad Amir E1CTA020_P02 have UR but agv no task for it please check April 28, 2025 at 5:45 PM, Mohammad Amir : Checking April 28, 2025 at 5:50 PM, Mohammad Amir : Everything is good from MCS /RTD side ✅. UR received successfully at 17:41. @ACS please check why AGV is still not assigning. Thank you very much! April 28, 2025 at 5:50 PM, Hári Zoltàn : Anód 2 coatet kb 10 perc mulva megáll mert a 2es rw-re nem jön agv April 28, 2025 at 5:52 PM, Yanina : Sziasztok, Cathode slitt 4 probléma transzfer U/W April 28, 2025 at 5:53 PM, Yanina : Most jó April 28, 2025 at 5:53 PM, K.Krisz Coating : An 2 2 rw nem jön az agv,bufferon a jumbo. Gyertek,kösze April 28, 2025 at 5:57 PM, VK (mcs) : Port is out of service April 28, 2025 at 6:00 PM, 서지원 : Photo April 28, 2025 at 6:01 PM, 서지원 : 음극2라인 2nd R/W agv 이슈로 인해 코팅 설비 멈췄습니다. 확인 부탁드립니다. April 28, 2025 at 6:04 PM, KIM SEYEON [김세연]_FA : @지석범PM (이반차FA) 피엠님 현장 확인 부탁드립니다. April 28, 2025 at 6:22 PM, 지석범PM (이반차FA) : 조치했습니다. April 28, 2025 at 6:26 PM, KIM SEYEON [김세연]_FA : 피엠님 혹시 문제가 어떤것이었나요? April 28, 2025 at 6:43 PM, 지석범PM (이반차FA) : 제가 확인한 것은 18시4분경에 최초 발생한 것으로 확인 했으며, 당시 포트가 acs상으로는 매뉴얼 상태로 전환되어있던걸로 확인됩니다. Agv가 진입을 안하고 있어서 테크니션분들이 agv를 수동으로 조작하려고 했으나, 주행이 동작을 하지 않고 있던 상황이었습니다. 제가 현장에 도착한 후에는 현재 위치의 전전 노드까지 이동후에 자동전환, 포트 자동 전환하였고, 정상 반송되는 것 확인했습니다. April 28, 2025 at 6:46 PM, 지석범PM (이반차FA) : 추가로 해당 노드 움직이지 않았던 이유는 포일 이재기, 코터 이재기 중간 위치에서 안전 센서 감지로 인한 정지입니다. April 28, 2025 at 7:49 PM, VK (mcs) : @FA Please check Cathode Roll STK C31 inactive stop. April 28, 2025 at 7:50 PM, Simon Attila F. A. : Ok. April 28, 2025 at 7:52 PM, Simon Attila F. A. : Solved. it just wasn't started after opening the door. April 28, 2025 at 7:52 PM, VK (mcs) : Thank you April 28, 2025 at 9:12 PM, VK (mcs) : @FA Please check Cathode conveyor C51 (8044) Destination position loss April 28, 2025 at 11:38 PM, VK (mcs) : @FA Please check Anode Roll STK A34 Output H/S off! April 28, 2025 at 11:44 PM, Simon Attila F. A. : Working. April 28, 2025 at 11:58 PM, 한동석 : 코팅 사이드링 완화 오실레이션 미사용으로 agv사용 가능합니다 다음롤부터 사용하면 문제발생시 대응 가능한상태인가요? April 29, 2025 at 12:02 AM April 29, 2025 at 12:02 AM, 배병민 (Bae Byoungmin) : 음극 2라인 가동이신건가요? April 29, 2025 at 12:04 AM, 한동석 : 예 음극 2라인입니다 방금 테크니션 대화해보니 한시간정도 뒤 한국 근무자가 오면 사용해달라고 말하는것같네요 담당자 오시고 저희에게 말해주시면 그때부터 사용 하겠습니다 April 29, 2025 at 12:04 AM, 이주봉PM LEE JUBONG(FA) : 가능합니다. April 29, 2025 at 12:05 AM, 배병민 (Bae Byoungmin) : @Simon Attila F. A. Please check if there is any problem in using the 2Line AGV and if it is ready for use. April 29, 2025 at 12:07 AM, Simon Attila F. A. : Ok, I coming. April 29, 2025 at 12:11 AM, Simon Attila F. A. : The Line 2 is ready to use the AGV'S. This is used for the next roll. April 29, 2025 at 12:13 AM, KIM SEYEON [김세연]_FA : super! April 29, 2025 at 12:15 AM, 배병민 (Bae Byoungmin) : Good job. Please strengthen monitoring and take action on the problem. April 29, 2025 at 3:42 AM, Oláh Rajmund : gyertek legyszives anode slitt 2 re meg állt a transzfer April 29, 2025 at 3:42 AM, Skwarek Tibor : Megyünk April 29, 2025 at 3:45 AM, Koska Szilárd János : Sziasztok kérnék szépen segítséget Anód press 3 hoz megált a leszedő robot a R/W nél April 29, 2025 at 3:46 AM, Simon Attila F. A. : This message was deleted. April 29, 2025 at 3:46 AM, Simon Attila F. A. : Megyünk. April 29, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+3 Overtime (3):Édl Tamás, Böröcz Tamás, Céhman Zsolt Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Oláh András, Céhman Zsolt Assembly(6): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs,Böröcz Tamás Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Édl Tamás April 29, 2025 at 6:12 AM, FACS_JaewonShin : ■ 29th April Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Jaewon shin April 29, 2025 at 6:15 AM, Hári Zoltàn : Sziasztok! Gyertek legyszi az anod 2 coaterre! Az egyik új operátor elrontotta a rendelést és nem tudjuk utána automatába kapcsolni. Ezt a jumbót levesszük manuálisa, majd a következőt kéne nézni ha lehet! Köszönöm! April 29, 2025 at 6:19 AM, Szabadi Miki : Rendben megyünk April 29, 2025 at 8:10 AM, Baek Hojong(백호종)FA : @김건희 피엠님! 음극 프레스 8호기 이재기 클램프 교체작업 금일 진행하겠습니다 비가동 다시한번더 확인부탁드립니다 April 29, 2025 at 8:48 AM, 조혜근 : @심찬울 음극 슬리터 1호기 UW측 이재기에서 터렛으로 이동후 척이 안되고있는데 한번 확인 부탁드려도 될까요? T-AXIS POSITION DETECT SENSOR ERROR Y-AXIS POSITION DETECT SENSOR ERROR 이런 알람 발생하고있습니다. April 29, 2025 at 8:49 AM, KIM SEYEON [김세연]_FA : 금일 확인하기로 했습니다. 잠시 조치 전까지 기다려주시겠습니까? @Baek Hojong(백호종)FA 피엠님이 확인 부탁드립니다. April 29, 2025 at 8:50 AM, 조혜근 : 혹시 언제 확인 가능하실까요? 시간 알려주시면 그때 대응해드리겠습니다. 지금 생산이 부족해서 계속 설비를 가동해야합니다. 오시기 전까지 수동으로 작업하고있겠습니다 April 29, 2025 at 8:51 AM, 문진영 : 지금 인원 들어가서 9시부터 점검 진행 예정입니다. April 29, 2025 at 8:51 AM, Baek Hojong(백호종)FA : 9시 설비점검 예정이고 완료시 바로 말씀드릴께요 혜근씨 April 29, 2025 at 8:52 AM, 김대호 (Kim Dae Ho) : 안녕하세요 Pm님 음극 프레스 8호기 금일 가동 계획없습니다! April 29, 2025 at 8:53 AM, 조혜근 : 넵 감사합니다! April 29, 2025 at 8:53 AM, 조혜근 : 넵 April 29, 2025 at 9:03 AM, Baek Hojong(백호종)FA : 확인 April 29, 2025 at 10:05 AM, Szabadi Miki : @Sazzad Bhai SKon The operator requested the roll to the wrong location, E0STKC31_P01 instead of E0STKC31_M01, could you return the material on P01 to the warehouse? April 29, 2025 at 10:12 AM, duzzaman Md (MCS) : Done. Thank you! April 29, 2025 at 10:13 AM, Szabadi Miki : Thank you! April 29, 2025 at 10:40 AM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1-2 April 29, 2025 at 10:44 AM, duzzaman Md (MCS) : There's existing job for E1SLC020_P01 Created 2 mins ago, with the carrier RBC0521, coming from STKC33 THANKS ! April 29, 2025 at 10:56 AM, duzzaman Md (MCS) : Trays are on the way. Monitoring further. April 29, 2025 at 11:04 AM, FACS_JaewonShin : 8호기 음극 롤프레스 언와인더 이재기 조치 완료되었습니다. April 29, 2025 at 11:07 AM, Baek Hojong(백호종)FA : 음극 프레스 8호기 이재기 작업완료되었습니다 조장님 April 29, 2025 at 11:08 AM, 김대호 (Kim Dae Ho) : 감사합니다. April 29, 2025 at 11:31 AM, Oláh András : @duzzaman Md (MCS) can u send more empty trays to cathode slitters? April 29, 2025 at 11:34 AM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1-2-3 April 29, 2025 at 11:35 AM, Oláh András : Kis türelmet kérünk, a raktár lassan dolgozik April 29, 2025 at 11:37 AM, Sazzad Bhai SKon : We're monitoring, crane has lots of jobs, busy now April 29, 2025 at 11:39 AM, 김대호 (Kim Dae Ho) : 금일도 창고 작업이 있으신가요? 양극 슬리팅 설비 계속 멈추고있는데 공트레이 공급 부탁드립니다. @김건희 April 29, 2025 at 11:39 AM, Sazzad Bhai SKon : The max capacity for anode is 15, but for cathode it's only 10. We'll check the reason April 29, 2025 at 1:35 PM, Somoskövy Martin : Sziasztok. Cathode Press 3 mellett lerobbant egy AGV és az említett gép 15 perce nem kapott új anyagot. Megnéznétek? Köszönöm. April 29, 2025 at 1:46 PM, Oláh András : @Sazzad Bhai SKon pls check material for E1PRC030_P01. April 29, 2025 at 1:52 PM, duzzaman Md (MCS) : There is no lot available. However, we see there is an existing job with the carrier ID RBC3484 which is stuck for more than 3 hours. April 29, 2025 at 1:54 PM, duzzaman Md (MCS) : @SCS Kindly check the carrier RBC3484 at E0STKC31 Current unit 0200302 Thank you April 29, 2025 at 1:54 PM, Oláh András : Checking April 29, 2025 at 1:58 PM, Oláh András : @duzzaman Md (MCS) can u send back RBC4760 to E0STKC31? April 29, 2025 at 2:00 PM, duzzaman Md (MCS) : Yes, job created. Thank you April 29, 2025 at 3:25 PM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1-2-3 April 29, 2025 at 3:31 PM, Szabadi Miki : Lassan jönnek raktárnak sok a feladat April 29, 2025 at 6:00 PM, FACS_Bareum kim : ■ 29th April Ivancsa FA CS - Withes service Hungary Night shift(18:00 - 06:00) : 1 people □Electrode / Assembly - PLC control 1 Bareum Kim April 29, 2025 at 6:29 PM, na1tis : Hello! Cathode Press 3, not working R/W April 29, 2025 at 6:29 PM, na1tis : Help me,please,Thank you) April 29, 2025 at 6:34 PM, Skwarek Tibor : Done April 29, 2025 at 7:30 PM, na1tis : need help again April 29, 2025 at 7:30 PM, na1tis : Please April 29, 2025 at 7:35 PM, Yanina : Sziasztok, Cathode slitten a tálcàk nagyon lassan jönnek. April 29, 2025 at 7:35 PM, Simon Attila F. A. : Sajnos a darunak más dolga is van. April 29, 2025 at 7:36 PM, Simon Attila F. A. : Anódon is ez a helyzet. April 29, 2025 at 8:26 PM, Yanina : Cathode slitt 2 nincs AGV 55p April 29, 2025 at 8:27 PM, Shahbaz 샤바즈 MCS/RTD : No lot available for Ca slitter unit #02 April 29, 2025 at 8:28 PM, Farkas Tamàs : Nincs anyag April 29, 2025 at 11:45 PM, Zsmenyák György : Sziasztok Anód Press 2 AGV probléma légyszi nézzetek rá April 29, 2025 at 11:49 PM, Skwarek Tibor : Megyünk April 29, 2025 at 11:50 PM, Simon Attila F. A. : Kész. April 30, 2025 at 12:20 AM April 30, 2025 at 12:20 AM, Zsmenyák György : Köszőnöm April 30, 2025 at 12:35 AM, na1tis : Cathode Press 2, R/W Problem,help me,please, not working April 30, 2025 at 12:35 AM, na1tis : Thank you) April 30, 2025 at 12:49 AM, Viczai Tamás : Automatában nem használható! April 30, 2025 at 1:33 AM, Koska Szilárd János : Sziasztok gyertek létszi Anód roll raktárhoz April 30, 2025 at 1:34 AM, Viczai Tamás : Már itt is vagyunk! April 30, 2025 at 2:29 AM, Yanina : Cathode slitt 4 probléma transzfer nincs tray ID April 30, 2025 at 2:30 AM, Yanina : R/W April 30, 2025 at 2:30 AM, Skwarek Tibor : Megyünk April 30, 2025 at 6:22 AM, (Unknown) : Sziasztok.Anód Press 4 23-as AGV kiált hibára.megnéznétek?köszi April 30, 2025 at 6:28 AM, Szeitz Flórián : Este folyamán voltak problémák a press gèpek R/W -nél hogy nem visszi el az AGV a Roll-t ,ha tudjátok ezt javítani légyszi nézètek meg hogy mihamarabb használható legyen az AGV. April 30, 2025 at 6:29 AM, adambenczik : @Mr.Miti (미티) FA April 30, 2025 at 6:29 AM, Mr.Miti (미티) FA : Az AGV-vel nincs probléma. A TR rá fog a bobbinra, a press elengedi és ott megáll a folyamat. Ez jelenleg 5 gépet érint. Valószínű program hiba. April 30, 2025 at 6:30 AM, Mr.Miti (미티) FA : Nemsokára megyek be ránézek, de valószínű csak 8 óra után lesz rá megoldás. April 30, 2025 at 6:30 AM, Szeitz Flórián : Rendben köszönöm. April 30, 2025 at 6:30 AM, Mr.Miti (미티) FA : Addig is türelmet kérnek! Köszönöm. April 30, 2025 at 6:47 AM, Powder tréner : Sziasztok,szeretnék kérni segítséget,poron EOCNV12_P07 conveyoron a 3 AGV félretola a palettát. April 30, 2025 at 7:05 AM, adambenczik : Úton vagyunk 👍 April 30, 2025 at 7:11 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— April 30, 2025 at 7:12 AM, FACS_JaewonShin : ■ 30th April Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Jaewon shin April 30, 2025 at 7:17 AM, cehmannzsoltcehmann : Késsz April 30, 2025 at 8:12 AM, Powder tréner : Poron 3 soron elakadt az AGV.Nézétek rá. April 30, 2025 at 8:15 AM, FACS_오창훈_CHANGHOON : ■ 30th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 2people □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok April 30, 2025 at 9:17 AM, cehmannzsoltcehmann : Megy már April 30, 2025 at 9:36 AM, 조혜근 : @Baek Hojong(백호종)FA PM님 지금 음극 프레스 8호기 RW UNLOAD TEST해보려고하는데 혹시 같이 확인 가능하실까요? April 30, 2025 at 9:36 AM, Baek Hojong(백호종)FA : 네 지금갑니다 April 30, 2025 at 9:42 AM, Szarka Adrián : Anod roll raktár 2 megállt agv vél együtt April 30, 2025 at 9:43 AM, Szarka Adrián : Gyertek kerlek köszi April 30, 2025 at 9:47 AM, Baek Hojong(백호종)FA : @서지원 피엠님 SKME분들은 알고 계시는데 현장 시프트리더에게 전달 부탁드립니다 금일 양음극 코터 1호기 생산인것으로 확인했고 AGV자동반송은 항상 저희 자동화 담당자가 도착후 시작하는것으로 꼭 전달 부탁드립니다 AGV와 이재기등등 준비하는 것과 대응 때문에 그렇습니다 April 30, 2025 at 9:47 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 안녕하세요 코터 음극 4라인 RW, UW EPC값 원점 완료 여부 공유 부탁드립니다. April 30, 2025 at 9:51 AM, Baek Hojong(백호종)FA : @코터 제조 생산시 AGV 자동반송은 항상 자동화 담당자가 현장에 와서 점검후 시작하는것으로 꼭 부탁드립니다 준비전 가동시 대응이 바로되지 않습니다 April 30, 2025 at 9:53 AM, 배일명 : 시프트리더 통해서 다시전달하겠습니다 April 30, 2025 at 10:18 AM, 김대호 (Kim Dae Ho) : Please check the conveyor on the second floor of Anode. April 30, 2025 at 10:19 AM, 김대호 (Kim Dae Ho) : 음극 2층 컨베이어 릴 없이 공트레이가 나가고있습니다. @Baek Hojong(백호종)FA April 30, 2025 at 10:20 AM, Baek Hojong(백호종)FA : 확인해보겠습니다 조장님 April 30, 2025 at 10:21 AM, 김대호 (Kim Dae Ho) : 감사합니다 pm님 현재 음극 슬리팅 3호기쪽에 있습니다. April 30, 2025 at 10:47 AM, Karina Lyzanets : Slziasztok! Slitt Cathode 1-2-3 re nem jönnek a tálcák April 30, 2025 at 10:47 AM, Mr.Miti (미티) FA : Nézem April 30, 2025 at 10:48 AM, Karina Lyzanets : Köszönöm szépen April 30, 2025 at 10:48 AM, Mr.Miti (미티) FA : Mennek a talcak csak lassan April 30, 2025 at 10:49 AM, Szarka Adrián : Katod 1 roll raktárnál rossz ajtó nyitás történt. Gyertek kerlek köszi April 30, 2025 at 10:49 AM, Mr.Miti (미티) FA : Sajnos a helyzet változatlan a múlt héthez képest. 🥺 April 30, 2025 at 10:49 AM, Mr.Miti (미티) FA : Nyissatok jó ajtót 😘🤪 April 30, 2025 at 10:50 AM, Szarka Adrián : Szólok az ujj kollégának 😘😘😘 April 30, 2025 at 11:15 AM, Powder tréner : Poron E1PLC931_P01 ,E1PLC031_P02 portra nem adja ki az automata raktár az anyagot. April 30, 2025 at 11:24 AM, 조혜근 : @FA We can't send the reel to the warehouse due to a lack of cathode slitter empty trays. Please check it April 30, 2025 at 11:26 AM, cehmannzsoltcehmann : The trays are coming slowly. April 30, 2025 at 11:27 AM, Baek Hojong(백호종)FA : 창고 정상 동작중인데 반송이 많이 늦는 상태입니다 April 30, 2025 at 11:34 AM, 조혜근 : 넵 알겠습니다! April 30, 2025 at 11:42 AM, Szeitz Flórián : Anód Slitt Conveyor pálya megàllt. Torlódnak a reelek. És nem jön az üres tálca. April 30, 2025 at 12:00 PM, cehmannzsoltcehmann : Koreai kollégák dolgoznak a raktárban, lassan elindulnak a raktárak és elkezd leürülni a cv April 30, 2025 at 12:51 PM, Szeitz Flórián : Mèg mindig bent vannak ? Mert most is tele ... April 30, 2025 at 12:53 PM, Mr.Miti (미티) FA : Mennek befelé de csak egy rakiba tudnak jelenleg April 30, 2025 at 12:53 PM, Szeitz Flórián : Akkor mostanra anód oldal is belasul. April 30, 2025 at 12:55 PM, Baek Hojong(백호종)FA : @Mr.Miti (미티) FA CA E0CNVC51 Track 8043 conveyer check plz Not moving April 30, 2025 at 1:01 PM, cehmannzsoltcehmann : @duzzaman Md (MCS) E1PLC031_A “no search lot” message appears on ports P01 and P02 during load request. Is there material in the warehouse? April 30, 2025 at 1:01 PM, duzzaman Md (MCS) : Checking April 30, 2025 at 1:02 PM, Mr.Miti (미티) FA : @Karina Lyzanets AGV on the way! April 30, 2025 at 1:05 PM, 김희용 : @FA Please Check E0CNVC51 Track 8043, 8047 Full Reel Tray LTC1443 Not going from 8043 -> 8047 April 30, 2025 at 1:06 PM, duzzaman Md (MCS) : No material available for this. Thanks April 30, 2025 at 1:22 PM, Vlad Danilevskyi : Hello. Anode press 2 AGV U/W problem. Thanks April 30, 2025 at 1:24 PM, Szeitz Flórián : Rosszul tette le a robot kar a Roll-t a buffer tárolóba. April 30, 2025 at 1:24 PM, 김대호 (Kim Dae Ho) : Four agvs are stopped in front of the Anode roll warehouse. @FA April 30, 2025 at 1:29 PM, Mr.Miti (미티) FA : Coming April 30, 2025 at 1:43 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 공트레이 공급 지연으로 전체 설비 비가동 발생중이며, 조립측 자재없다고 피드백 받았습니다. 공트레이 공급 확인 부탁드리겠습니다. @김건희 @KIM SEYEON [김세연]_FA April 30, 2025 at 1:45 PM, Szarka Adrián : Anod Slitt 1 re miért nem jön az agv 20 perce kerlek nézzetek meg. Köszönöm April 30, 2025 at 1:45 PM, Mr.Miti (미티) FA : Itt vagyok April 30, 2025 at 1:45 PM, Szarka Adrián : Ugyan ez a helyzet anod Slitt 2 vél is April 30, 2025 at 1:45 PM, Mr.Miti (미티) FA : Emoticons April 30, 2025 at 1:46 PM, Szarka Adrián : Hol ? 🤣🤣🤣🤣 April 30, 2025 at 1:46 PM, Mr.Miti (미티) FA : Acs meghalt April 30, 2025 at 1:46 PM, Mr.Miti (미티) FA : Anode press 2 uw April 30, 2025 at 1:58 PM, Szarka Adrián : 😢😢😢 April 30, 2025 at 1:58 PM, Mr.Miti (미티) FA : Megy már April 30, 2025 at 2:32 PM, (Unknown) : Katód press 1 nem jön az AGV a jumbóért.Megnéznétek?köszi April 30, 2025 at 2:36 PM, Vlad Danilevskyi : Hello. Az AGV több mint egy órája nem érkezett meg az RW a kész tekercsért. Köszönöm. April 30, 2025 at 2:37 PM, Mr.Miti (미티) FA : Ez is CA press 1? April 30, 2025 at 2:37 PM, Vlad Danilevskyi : Anode press 2 April 30, 2025 at 2:37 PM, Mr.Miti (미티) FA : Köszönöm April 30, 2025 at 2:37 PM, Mr.Miti (미티) FA : Nézzük April 30, 2025 at 2:38 PM, adambenczik : ACS baj van, megint April 30, 2025 at 2:38 PM, cehmannzsoltcehmann : @duzzaman Md (MCS) E1PRA020 & 040 ACS Ack please check April 30, 2025 at 2:39 PM, adambenczik : & E1PRC010 April 30, 2025 at 2:43 PM, duzzaman Md (MCS) : There are active job. But its coming slow. AN STK52 cranes are in error state , April 30, 2025 at 2:43 PM, duzzaman Md (MCS) : @FA Please check April 30, 2025 at 2:46 PM, adambenczik : There is testing going on with STKA52 April 30, 2025 at 2:46 PM, adambenczik : Thank you April 30, 2025 at 2:51 PM, Karina Lyzanets : Slitt Cathode 1-2 re nem jönn AGV robot April 30, 2025 at 2:51 PM, Karina Lyzanets : Köszönöm szépen April 30, 2025 at 2:54 PM, Karina Lyzanets : Slitt Cathode 3 se jönn April 30, 2025 at 2:54 PM, adambenczik : Ide jön April 30, 2025 at 2:56 PM, adambenczik : @duzzaman Md (MCS) is there no material? April 30, 2025 at 2:57 PM, Sazzad Bhai SKon : No search lot April 30, 2025 at 2:57 PM, adambenczik : Thank you April 30, 2025 at 2:57 PM, duzzaman Md (MCS) : Additionally STK51 C02 is OOS April 30, 2025 at 2:58 PM, duzzaman Md (MCS) : @FA Please check. Thank you April 30, 2025 at 2:58 PM, Mr.Miti (미티) FA : Anode cathode ? April 30, 2025 at 2:59 PM, duzzaman Md (MCS) : Cathode E0STKC51_C02 April 30, 2025 at 3:35 PM, 김대호 (Kim Dae Ho) : Are there any rolls that can come to Cathode slitet 1 and 2? April 30, 2025 at 3:36 PM, Mr.Miti (미티) FA : No April 30, 2025 at 3:38 PM, Mr.Miti (미티) FA : @duzzaman Md (MCS) please check available materials for E1SLC010_P01, E1SLC020_P01. Thank you very much! April 30, 2025 at 3:38 PM, 김대호 (Kim Dae Ho) : Again? Why? Can you check the roll of the carrier ID I tell you? April 30, 2025 at 3:38 PM, Mr.Miti (미티) FA : Yes April 30, 2025 at 3:38 PM, Mr.Miti (미티) FA : Tell me April 30, 2025 at 3:41 PM, 김대호 (Kim Dae Ho) : RBC0431 RBC0435 RBC0504 RBC0590 RBC0022 RBC0028 April 30, 2025 at 3:43 PM, duzzaman Md (MCS) : No Lot available. However there is active job for both April 30, 2025 at 6:03 PM, FACS_Bareum kim : ■ 30th April Ivancsa FA CS - Withes service Hungary Night shift(18:00 - 06:00) : 1 people □Electrode / Assembly - PLC control 1 Bareum Kim April 30, 2025 at 6:12 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 6:26 PM, Viktoriia Hleba : 2 slitter cathode nincs AGV - 75 perc April 30, 2025 at 6:27 PM, Rácz Dániel / FA : Checking April 30, 2025 at 6:29 PM, VK (mcs) : No available material April 30, 2025 at 6:30 PM, Rácz Dániel / FA : Thank sou for the information April 30, 2025 at 6:55 PM, Rácz Dániel / FA : Help help April 30, 2025 at 6:58 PM, Rácz Dániel / FA : Sziasztok Coatingon várható AGV- vel anyagmozgatás ? Köszönöm April 30, 2025 at 7:12 PM, Rácz Dániel / FA : EL GF CA CT #1 fog csak termelni. AGV-t nem fognak használni. April 30, 2025 at 7:32 PM, Rácz Dániel / FA : EL GF AN conveyoron nagyon lassan jönnek az üres reel tálcák. Ha jól látom csak az AN52-ből jönnek. April 30, 2025 at 7:46 PM, Rácz Dániel / FA : Slitt 1 re úton van a #14 es AGV a jumbo val a roll raktárból. April 30, 2025 at 7:47 PM, Rácz Dániel / FA : @VK (mcs) Please check this port: E1SLC020_P01 Why not coming the AGV ? April 30, 2025 at 7:50 PM, Rácz Dániel / FA : @VK (mcs) Need more empty tray’s on the AN SL machines. Thank you. April 30, 2025 at 7:50 PM, VK (mcs) : There is no available material April 30, 2025 at 7:51 PM, Rácz Dániel / FA : Thank you Sir ! 🙏 April 30, 2025 at 7:51 PM, Rácz Dániel / FA : Nincs elérhető anyag a CA slitt #2-re. 😞 April 30, 2025 at 7:53 PM, VK (mcs) : Currently 13 jobs assigned to CNV but STK is busy April 30, 2025 at 7:54 PM, Rácz Dániel / FA : Thank you Mr for the information. April 30, 2025 at 7:54 PM, VK (mcs) : Most welcome April 30, 2025 at 7:55 PM, Rácz Dániel / FA : AN üres reel tálcák lassan jönnek, mert a darunak sok feladata van. April 30, 2025 at 8:02 PM, Szücs Géza FT-B : @Erik Gerzsenyi @Nagy Dávid 4 mi a mai termelési terv (mennyi press és slitt oldalanként?)? April 30, 2025 at 8:02 PM, Rácz Dániel / FA : AN #32 es roll raktárba a #22 es AGV, többszöri próbálkozásra sem tudott beállni a port ra. Kézzel beigazítás. April 30, 2025 at 8:05 PM, Rácz Dániel / FA : Ez miatt az AN slitt #2 re késik a jumbo roll. April 30, 2025 at 8:06 PM, Rácz Dániel / FA : Azt hiszem azt mondták oldalanként 2 press és 5 slitt. 😅 April 30, 2025 at 8:09 PM, Rácz Dániel / FA : EL GF AN press 6 UW OP panelja előtt kiállt az #1 AGV “FSL sensor detected” hibára. Node: 3263 April 30, 2025 at 8:11 PM, Nagy Dávid 4 : Szia! Anod press 2 termel Anod press 4 termel Anod slitt 1-2 termel Anod slitt 3 termel Katod press 1 termel Katod press 3 termel Katod slitt 1-2 termel April 30, 2025 at 8:47 PM, Rácz Dániel / FA : AN oldalon a conveyoron lassan, de érkeznek az üres reel tálcák. April 30, 2025 at 8:51 PM, Rácz Dániel / FA : @VK (mcs) Please raise up the priority AN empty reel tray’s. Thank you. April 30, 2025 at 8:52 PM, Rácz Dániel / FA : Beacause the slitt machines stopping and no lot avaible materials the assambly. April 30, 2025 at 8:53 PM, Rácz Dániel / FA : THX April 30, 2025 at 9:02 PM, VK (mcs) : Checking April 30, 2025 at 9:15 PM, Nagy Dávid 4 : Anod slitt 1 20 perce nincsen agv help help köszönöm szépen April 30, 2025 at 9:18 PM, Rácz Dániel / FA : @VK (mcs) Please check this port: E1SLA010_P01 Thank’s April 30, 2025 at 9:20 PM, Rácz Dániel / FA : Why not come the AGV ? April 30, 2025 at 9:20 PM, Czeilinger Krisztián : This message was deleted. April 30, 2025 at 9:21 PM, VK (mcs) : I am checking April 30, 2025 at 9:21 PM, Rácz Dániel / FA : Thank you Sir ! April 30, 2025 at 9:23 PM, VK (mcs) : There is no available material April 30, 2025 at 9:39 PM, Rácz Dániel / FA : Thank you April 30, 2025 at 9:39 PM, Rácz Dániel / FA : Nincs elérhető anyag April 30, 2025 at 10:55 PM, Rácz Dániel / FA : @VK (mcs) Please check why not come AGV this port’s. Thank you E1SLA010_P01 April 30, 2025 at 10:57 PM, VK (mcs) : No material is available April 30, 2025 at 10:58 PM, Rácz Dániel / FA : Thank you Sir ! April 30, 2025 at 10:58 PM, Rácz Dániel / FA : Nincs elérhető anyag. 😞 April 30, 2025 at 11:00 PM, Erik Gerzsenyi : 95.671 meter van a raktarban April 30, 2025 at 11:01 PM, Rácz Dániel / FA : @Szücs Géza FT-B April 30, 2025 at 11:02 PM, Rácz Dániel / FA : Mi hogy hogy nem láthjuk ezt ? @VK (mcs) Köszi April 30, 2025 at 11:02 PM, VK (mcs) : It should be check by MES person in charge. April 30, 2025 at 11:05 PM, Rácz Dániel / FA : Thank you May 1, 2025 at 12:04 AM May 1, 2025 at 12:04 AM, Rácz Dániel / FA : Megint kiállt hibára ugyan az az AGV, ugyan azon a node-on. May 1, 2025 at 1:11 AM, Szappanos Gábor : Hali. Katód 1 nél bezavarodtak a taligák. Megnéznétek légyszives. Köszi May 1, 2025 at 1:11 AM, Szappanos Gábor : Coating May 1, 2025 at 1:16 AM, Szücs Géza FT-B : @Pálosi Róbert May 1, 2025 at 1:27 AM, Pálosi Róbert : Oks May 1, 2025 at 1:29 AM, Pálosi Róbert : Kész May 1, 2025 at 1:34 AM, Szappanos Gábor : Köszi May 1, 2025 at 1:42 AM, Rácz Dániel / FA : EL GF AN 32 STK nél, nem működik a KiOsZK. May 1, 2025 at 2:05 AM, Rácz Dániel / FA : @Szücs Géza FT-B help help CA 51 CNV May 1, 2025 at 2:06 AM, Csanálosi Gábor FA : Most indul a porra May 1, 2025 at 2:07 AM, Szücs Géza FT-B : az nem az May 1, 2025 at 2:07 AM, Szücs Géza FT-B : Porra megyek May 1, 2025 at 2:09 AM, Rácz Dániel / FA : @Böröcz Tamás segített May 1, 2025 at 2:29 AM, Rácz Dániel / FA : @termelés CA CNV megint lift hibánk van. May 1, 2025 at 2:36 AM, Rácz Dániel / FA : Ez miatt késhetnek az üres reel tálcák. Illetve fel tórlódhatnak a teli reel tálcák. May 1, 2025 at 2:57 AM, Rácz Dániel / FA : CA Conveyor leállítva koreai kolléga próbálja a liftet megcsinálni May 1, 2025 at 3:02 AM, Rácz Dániel / FA : Itt vagyok koreai CS kollégával CA félszinten May 1, 2025 at 3:30 AM, Nagy Dávid 4 : Anod roll raktárban 19 számú agv kiált hibára help help köszönöm szépen May 1, 2025 at 3:39 AM, Czeilinger Krisztián : Megyünk. May 1, 2025 at 3:44 AM, Czeilinger Krisztián : Kész May 1, 2025 at 3:53 AM, Szücs Géza FT-B : Photo May 1, 2025 at 3:54 AM, Szücs Géza FT-B : 4kor leltár miatt a reel raktáraknak le kell állni May 1, 2025 at 3:54 AM, Szücs Géza FT-B : a CV-n gyűlhet az áru, amíg van hely May 1, 2025 at 3:55 AM, Szücs Géza FT-B : @Erik Gerzsenyi @Nagy Dávid 4 May 1, 2025 at 3:55 AM, Csanálosi Gábor FA : Halleluja May 1, 2025 at 4:53 AM, Szücs Géza FT-B : Reel raktárak használhatóak May 1, 2025 at 5:49 AM, FACS_JaewonShin : ■ 1st May Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Jaewon shin May 1, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— May 1, 2025 at 6:19 AM, (Unknown) : Sziasztok.Anód Press 8-as gép mögött az 1-és AGV poziciót vesztett.megnéznétek?köszönöm May 1, 2025 at 6:41 AM, (Unknown) : Anód slitt 3 leszedő kar megált.ránéznétek?köszi May 1, 2025 at 6:43 AM, Powder tréner : Sziasztok szeretnék kérni segítséget,poron 3 AGV nem működik. May 1, 2025 at 7:00 AM, adambenczik : Megoldottam a problémát, viszont most az operátor nem tudja automatába tenni a gépet és Load Request-et kérni. A termeléses gép már nem az én területem, nem tudok segíteni 🥹 May 1, 2025 at 7:04 AM, Kurgya Attila : Sziasztok Katod 1en szeretnénk használni agv-ket Van bármi akadálya? May 1, 2025 at 7:11 AM, adambenczik : Megoldva May 1, 2025 at 7:17 AM, Powder tréner : A poron katod raktár kiált hibára,conveyor közepén elakadt egy raklap. Nézzétek rá. May 1, 2025 at 7:18 AM, Mr.Miti (미티) FA : Rendben May 1, 2025 at 7:22 AM, Powder tréner : Anod oldalon is kiált hibára a raktár. May 1, 2025 at 7:22 AM, Balogh Ádám : Porra gyertek légyszives mert már nem maradt anyag tölteni May 1, 2025 at 7:24 AM, Mr.Miti (미티) FA : Nem vagyunk túl sokan, de a amint tudunk érkezünk. May 1, 2025 at 7:49 AM, 한동석 : 안녕하세요 양극 2라인 agv사용중 이재기 적재상태로 에러 발생하여 멈춰있습니다. 한국인 대응가능하신분 계신가요? 테크니션 조치중이나 안되고있습니다 May 1, 2025 at 7:57 AM, FACS_JaewonShin : 현장가겠습니다 코터인가요? May 1, 2025 at 8:01 AM, 한동석 : 네 May 1, 2025 at 8:28 AM, cehmannzsoltcehmann : @mcs E0CNVC12_P02 please give a destination May 1, 2025 at 8:29 AM, cehmannzsoltcehmann : @Shahbaz 샤바즈 MCS/RTD May 1, 2025 at 8:29 AM, Shahbaz 샤바즈 MCS/RTD : Checking May 1, 2025 at 8:31 AM, Shahbaz 샤바즈 MCS/RTD : There is already a transfer command, please check RTV. May 1, 2025 at 8:33 AM, cehmannzsoltcehmann : Destinaiton empty May 1, 2025 at 8:33 AM, cehmannzsoltcehmann : 2101 should be ther May 1, 2025 at 8:34 AM, cehmannzsoltcehmann : Port 2113 should be targeted to 2101 May 1, 2025 at 8:35 AM, cehmannzsoltcehmann : The destination for port 2101 should be empty. May 1, 2025 at 8:37 AM, Shahbaz 샤바즈 MCS/RTD : The destination is 2101 May 1, 2025 at 8:37 AM, cehmannzsoltcehmann : I already solved it. Thanx May 1, 2025 at 8:53 AM, 김대호 (Kim Dae Ho) : Please check the error of the Anode roll warehouse. May 1, 2025 at 8:57 AM, adambenczik : Solved May 1, 2025 at 9:01 AM, 김대호 (Kim Dae Ho) : Is there any roll to be returned to Cathode sliter 1 and 2 Agv? May 1, 2025 at 9:03 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD lot search: 0 May 1, 2025 at 10:18 AM, Karina Lyzanets : Sziasztok, gyertek légyszíves az Slitt Cathode 2 re May 1, 2025 at 10:18 AM, Mr.Miti (미티) FA : Megyek May 1, 2025 at 10:18 AM, Karina Lyzanets : Transfer probléma az R/W oldalon May 1, 2025 at 10:18 AM, Karina Lyzanets : Köszi May 1, 2025 at 10:24 AM, adambenczik : Kész May 1, 2025 at 10:31 AM, Powder tréner : Poron 3 AGV elvesztette a pozícióját. S.O.S May 1, 2025 at 10:34 AM, Mr.Miti (미티) FA : Megyünk megyünk May 1, 2025 at 10:52 AM, 김대호 (Kim Dae Ho) : Please check the Anode conveyor alarm May 1, 2025 at 10:56 AM, adambenczik : Solved May 1, 2025 at 1:38 PM, Powder tréner : Poron kikapcsolódot az e 2-ES AGV E1PLC031_P02 portnál nézzétek rá. May 1, 2025 at 3:07 PM, (Unknown) : Anód slittekre nem jönnek a tálcák.megnéznétek?köszönöm May 1, 2025 at 3:07 PM, Mr.Miti (미티) FA : Nézem May 1, 2025 at 3:29 PM, Mr.Miti (미티) FA : Jönnek May 1, 2025 at 3:29 PM, Mr.Miti (미티) FA : Csak elfelejtettem írni 🫣 May 1, 2025 at 4:01 PM, 장정훈 : The crane is not moving even though there is a roll STK return order for Cathode 1. Please check! May 1, 2025 at 4:01 PM, Mr.Miti (미티) FA : Checking! May 1, 2025 at 4:04 PM, Mr.Miti (미티) FA : Solved (thumbsup) May 1, 2025 at 4:10 PM, Hári Zoltàn : Hello! anode 2 coater will start soon. May 1, 2025 at 4:17 PM, (Unknown) : Sziasztok.Anód Press 8-as gép mögött a 24-es AGV poziciót vesztett.megnéznétek?köszönöm May 1, 2025 at 4:18 PM, adambenczik : Megyek May 1, 2025 at 4:49 PM, Kurgya Attila : Gyertek légyszíves anod 2 U/W-hez. A leszedő karok nagyon alacsonyan vannak. Köszi May 1, 2025 at 4:50 PM, adambenczik : Megyünk May 1, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 1, 2025 at 6:48 PM, Rácz Dániel / FA : @VK (mcs) Hello, thank you for being here and helping our work. 🙏 May 1, 2025 at 6:51 PM, VK (mcs) : It's my pleasure. Thank you May 1, 2025 at 6:57 PM, Rácz Dániel / FA : AN 34 es roll raktárban, megállt a STK mert egy másik jumbo roll fóliája ráesett a szenzorra. Fólia eltávolítása. Kész May 1, 2025 at 6:58 PM, Rácz Dániel / FA : Ez miatt az AN PRess 1 késni fog a junbo roll. May 1, 2025 at 7:14 PM, Rácz Dániel / FA : AN oldalon Coatingon az AGV-k lekapcsolva a termelés kérésère, mert a töltőre való mozgások közben akadályozzák a termelést a kézi kocsikkal való szabad közlekedésben. May 1, 2025 at 7:16 PM, Rácz Dániel / FA : Coating CA oldalon is ez miatt lekapcsolva az AGV-k. Térképről nincsenek eltávolítva. Útvonalról nincsenek elmozgatva. May 1, 2025 at 7:17 PM, Rácz Dániel / FA : This message was deleted. May 1, 2025 at 8:53 PM, Szarka Adrián : Anod slitt2 nincs talca May 1, 2025 at 8:53 PM, Szarka Adrián : Gyertek kerlek köszi May 1, 2025 at 9:00 PM, Rácz Dániel / FA : Nézem May 1, 2025 at 9:00 PM, Czeilinger Krisztián : Kicsit lassan mennek az üres tálcák. May 1, 2025 at 9:02 PM, Rácz Dániel / FA : A51 raktárnál van hiba May 1, 2025 at 9:05 PM, Rácz Dániel / FA : Fent az első emelet assy-n May 1, 2025 at 9:09 PM, Rácz Dániel / FA : @VK (mcs) E0STKC51 and E0STKA51 is very overloaded with orders ! Do You know why ? May 1, 2025 at 9:11 PM, VK (mcs) : Checking May 1, 2025 at 9:12 PM, Rácz Dániel / FA : Thank you May 1, 2025 at 9:14 PM, VK (mcs) : As I see, there are many manual rack-to-rack orders. May 1, 2025 at 9:16 PM, VK (mcs) : I have no info about that, but it is better to answer by @FA team. May 1, 2025 at 9:17 PM, 김주연 : Is destination of manual job notching room port? Or just 51 to 52? May 1, 2025 at 9:19 PM, VK (mcs) : For notching side, jobs were created automatically. Those jobs are rack to rack transitions inside the STK May 1, 2025 at 9:21 PM, 김주연 : Manual job is for organizing NG reels (from fa) May 1, 2025 at 9:23 PM, 김주연 : Job's priority is lower than auto jobs. (참고해주세요~~) May 1, 2025 at 9:40 PM, Rácz Dániel / FA : Need higher priority AN slitt empty reel trays, because the slitt machines stopping. May 1, 2025 at 9:42 PM, VK (mcs) : Checking May 1, 2025 at 9:42 PM, Rácz Dániel / FA : Thank you Sir ! 🙏 May 1, 2025 at 9:42 PM, 방혁 PM(Bang.Hyuk) FA : Empty tray is being supplied. You seem to need time May 1, 2025 at 9:44 PM, VK (mcs) : @FA Please check Anode conveyor A51 (6034) Carrier is stopped. May 1, 2025 at 9:44 PM, Rácz Dániel / FA : Thanks May 1, 2025 at 9:44 PM, Rácz Dániel / FA : IGo May 1, 2025 at 9:46 PM, Rácz Dániel / FA : Now conveyor error May 1, 2025 at 9:48 PM, 방혁 PM(Bang.Hyuk) FA : I leave a message because I think there will be an official misunderstanding. The manual for organizing the NG Reel is applied only to the CA warehouse. AN Reel Warehouse is not unusual May 1, 2025 at 9:52 PM, Rácz Dániel / FA : Solved, stopper problem. May 1, 2025 at 9:53 PM, Rácz Dániel / FA : Thank you May 1, 2025 at 10:18 PM, Pintér Gábor : Foil stockerhez szeretnénk segítséget kérni Coating May 1, 2025 at 10:19 PM, Viktor Vadas : Illetve a Jumbo raktarhoz is May 1, 2025 at 10:19 PM, Rácz Dániel / FA : Jövünk May 1, 2025 at 10:31 PM, Rácz Dániel / FA : #1 es fólia raktárhoz szeretnénk segítséget kérni. Port interface error miatt. Köszi May 1, 2025 at 10:37 PM, Rácz Dániel / FA : @Szücs Géza FT-B megoldotta laptoppal. Kész May 1, 2025 at 10:51 PM, Anton Mashchenko : Hello, anode press 2, AGV not coming 17 min! Help! Thanks! May 1, 2025 at 10:53 PM, VK (mcs) : AGV 22 on the way May 1, 2025 at 10:59 PM, Nagy Dávid 4 : Anod press 2 U/W robot kiált hibára help help köszönöm szépen May 1, 2025 at 11:07 PM, Czeilinger Krisztián : Oké. Nézzük. May 1, 2025 at 11:12 PM, Czeilinger Krisztián : Kész May 1, 2025 at 11:21 PM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Zero hour I coming. May 1, 2025 at 11:25 PM, Czeilinger Krisztián : It's okay, comrade. May 1, 2025 at 11:50 PM, Nagy Dávid 4 : Anod slitt2 nincs talca help help köszönöm szépen May 2, 2025 at 12:02 AM May 2, 2025 at 12:02 AM, Rácz Dániel / FA : A52 es raktárban az 1F assyn van a hiba May 2, 2025 at 12:14 AM, Rácz Dániel / FA : @Viktor Vadas gyere vissza meg van a LOT ID RTD ben May 2, 2025 at 12:19 AM, Rácz Dániel / FA : @VK (mcs) E0STKA34_M02 RBA1365 Why can't I return it to the warehouse? Please help. May 2, 2025 at 12:22 AM, VK (mcs) : There is no any log about it Did you try to rack-in ? May 2, 2025 at 12:23 AM, Rácz Dániel / FA : Yes, but no permissions. May 2, 2025 at 12:25 AM, VK (mcs) : MCS didn't receive any commands from that. Last information is about 17 April May 2, 2025 at 12:31 AM, Rácz Dániel / FA : This nice May 2, 2025 at 1:03 AM, Rácz Dániel / FA : @VK (mcs) @Viktor Vadas @Böröczki Balázs @Szücs Géza FT-B solved together ! 🤞🦾🙏 May 2, 2025 at 1:06 AM, VK (mcs) : What was the carrier status? It was empty? Rack in reply had MES error. May 2, 2025 at 1:09 AM, Rácz Dániel / FA : Full jumbo roll May 2, 2025 at 1:14 AM, VK (mcs) : MES status is Empty MCS status is FULL Reason on phenomenon is carrier transferred offline and it didn't submit in system. Please next time, first rack-out it online and try rack-in again. Thank you May 2, 2025 at 1:19 AM, Szücs Géza FT-B : CTA030-ra tud valaki jönni segíteni? May 2, 2025 at 1:23 AM, Rácz Dániel / FA : Mondjuk én ? May 2, 2025 at 1:26 AM, Rácz Dániel / FA : OmV May 2, 2025 at 2:21 AM, Nagy Dávid 4 : anode 2 megált az AGV help help köszönöm szépen May 2, 2025 at 2:21 AM, Rácz Dániel / FA : @Szücs Géza FT-B please help May 2, 2025 at 2:24 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián May 2, 2025 at 2:24 AM, Rácz Dániel / FA : @fa May 2, 2025 at 2:25 AM, Czeilinger Krisztián : Megyek. May 2, 2025 at 2:26 AM, Czeilinger Krisztián : Kész. May 2, 2025 at 2:59 AM, Rácz Dániel / FA : Köszi May 2, 2025 at 2:59 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Poron vagyok sietek May 2, 2025 at 3:19 AM, Pálosi Róbert : Oks May 2, 2025 at 3:35 AM, Czeilinger Krisztián : Rendben. May 2, 2025 at 5:30 AM, Rácz Dániel / FA : @solved May 2, 2025 at 6:08 AM, FACS_JaewonShin : ■ 2nd May Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Jaewon shin May 2, 2025 at 6:11 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2):Novák Károly, Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Kovács Szabolcs 1F: Kasztel Balázs, Novák Zoltán Modul(2): Magyar Balázs, Martina Dávid, May 2, 2025 at 6:19 AM, duzzaman Md (MCS) : @FA E0STKA32_C01 Material loosening (Right) error Thanks ! May 2, 2025 at 6:20 AM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.02 Time:06:00-18:00 1. Lee jubong 이주봉PM 2. Ji seokbeom 지석범PM Köszönöm szépen May 2, 2025 at 6:21 AM, duzzaman Md (MCS) : Wokrtable double storage error now. May 2, 2025 at 6:25 AM, Oláh András : Checked and now working 👍 May 2, 2025 at 6:33 AM, duzzaman Md (MCS) : @FA Please check E0STKC33_C01 there is Travel exact position error after movement . Thank you very much! May 2, 2025 at 6:37 AM, Szabadi Miki : Checked and now working 👍 May 2, 2025 at 7:17 AM, duzzaman Md (MCS) : @FA Please check E0STKC33_C01 there is Travel lag error . Thank you very much! May 2, 2025 at 7:28 AM, Oláh András : Checked and now ok May 2, 2025 at 7:35 AM, Turianytsia Olesia : A szállítószalag nem működik. Anode slitt 2-3 May 2, 2025 at 7:36 AM, Kiss Balázs F.A. : Kis türelmet kérünk May 2, 2025 at 7:50 AM, FACS_오창훈_CHANGHOON : ■ 2nd May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 2people □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok May 2, 2025 at 8:44 AM, Majláth Martin : Sziasztok! Catod press 2. Re szeretnék segítséget kérni. RW ki állt hibára. May 2, 2025 at 8:44 AM, Majláth Martin : Köszi! May 2, 2025 at 8:59 AM, Turianytsia Olesia : Nincs AGV 25 perc anode slitt 1-2 May 2, 2025 at 9:00 AM, Szabadi Miki : @duzzaman Md (MCS) please check this. 🙏 May 2, 2025 at 9:06 AM, duzzaman Md (MCS) : There are active jobs. However, Cranes of STK C52 are OOS. MCS order is okay. It should be normalised as soon as the STK/Cranes gets in service. Thanks May 2, 2025 at 9:10 AM, Szabadi Miki : E1SLA010_P01 and E1SLA020_P01 have LR but AGV doesn't bring the Rolls May 2, 2025 at 9:13 AM, duzzaman Md (MCS) : Unfortunately, no search lot. Jobs would be created as soon as there are enough lot. Thank you May 2, 2025 at 9:13 AM, Szabadi Miki : Thank you May 2, 2025 at 9:14 AM, Szabadi Miki : Nincs anyag May 2, 2025 at 9:27 AM, Turianytsia Olesia : Nincs AGV 20 perc cathode slitt 1-2 May 2, 2025 at 9:30 AM, Szabadi Miki : Nézzük May 2, 2025 at 9:32 AM, FACS_JaewonShin : 분체 AGV 티칭 불가 사유 : 메뉴얼 상태에서 티칭 apply 불가 PlC내 어드레스 : M4043 HMI내 어드레스 : M4034 May 2, 2025 at 9:34 AM, FACS_JaewonShin : 음극 3번 agv가 119번노드 간섭 생겨 해당 문제 조치후 hmi원복 진행 하였습니다. May 2, 2025 at 9:35 AM, KIM SEYEON [김세연]_FA : 감사합니다. May 2, 2025 at 9:35 AM, duzzaman Md (MCS) : 🚨 Current Machine Status 🔧 E0STKC52-C01 Issue: Open door error (OP) Since: 09:26 🔧 E0STKC52-C02 Issue: For#2 SEW Emergency Stop Since: 09:26 🔧 E0STKA33 Issue: Open door error Since: 11:23 am May 2, 2025 at 9:39 AM, Szabadi Miki : Agv#7 úton--> slitt#1 May 2, 2025 at 9:55 AM, Szabadi Miki : Agv#16 úton---> Cathode Slitt#2 May 2, 2025 at 10:05 AM, Oláh András : @duzzaman Md (MCS) can u store back material from E0STKC34_P01? Thank you May 2, 2025 at 10:12 AM, duzzaman Md (MCS) : Already done. Thanks May 2, 2025 at 10:12 AM, Turianytsia Olesia : Szállítószalag hiba cathode slitt 2 May 2, 2025 at 10:14 AM, Turianytsia Olesia : Nem vette fel a transzfer Anyagot a B oldalról cathode slitt 2 May 2, 2025 at 10:24 AM, Csicskovics Balázs : Cathode pressre nem jön az AGV nézzétek meg kérlek Köszönöm May 2, 2025 at 10:33 AM, Oláh András : @duzzaman Md (MCS) pls send material from E0STKC34_P01 to E1SLC030_P01 Thank you very much May 2, 2025 at 10:37 AM, duzzaman Md (MCS) : Please press LR May 2, 2025 at 10:38 AM, Oláh András : This roll have no ID so the LR wont work May 2, 2025 at 10:38 AM, Oláh András : That's why we need your help to send manually May 2, 2025 at 10:39 AM, duzzaman Md (MCS) : Please press LR. Then the roll ID will come. We are monitoring it. May 2, 2025 at 10:40 AM, Oláh András : Ok May 2, 2025 at 10:46 AM, 장정훈 : Error has occurred, please check!!! Cathode Roll STK04 P01 May 2, 2025 at 10:47 AM, Oláh András : Checking May 2, 2025 at 11:55 AM, Szabadi Miki : @duzzaman Md (MCS) Could you send it back to the warehouse EE0JGVA01_VC10 RBA0337? The material is damaged, production will be closed. May 2, 2025 at 11:58 AM, duzzaman Md (MCS) : Job has been created. Monitoring further. Thank you. May 2, 2025 at 11:58 AM, Szabadi Miki : Thank you! May 2, 2025 at 12:01 PM, Sazzad Bhai SKon : Next lot quantity update: Empty magazines > Notching: CA 201, AN 28 VD STK to stacking: CA 11, AN 152 May 2, 2025 at 12:05 PM, Szabadi Miki : Wrong group 🙂 May 2, 2025 at 1:05 PM, Csicskovics Balázs : Egy kis segítséget szeretnék kérni a cathode roll raktárhoz Köszönöm May 2, 2025 at 1:05 PM, Oláh András : Megyünk May 2, 2025 at 1:43 PM, 장정훈 : Cathode roll warehouse 5 light curtain detection error. I do not know why. Please check! May 2, 2025 at 1:46 PM, duzzaman Md (MCS) : @FA Please check E0STKC35_C01 MCP made error Thank you May 2, 2025 at 1:46 PM, Hári Zoltàn : Cathode 2 coater starting now. We want to use AGV's. Please come to check! Thanks! May 2, 2025 at 2:26 PM, 김대호 (Kim Dae Ho) : Cathode slitet 1 Please check the L/R May 2, 2025 at 2:41 PM, Csicskovics Balázs : Anode slitt 1 az AGV nem tud beállni a helyére. Gyertek légyszives Köszönöm May 2, 2025 at 2:46 PM, Szabadi Miki : Coatingon vagyunk amint itt végzünk megyünk May 2, 2025 at 2:46 PM, Csicskovics Balázs : Megcsináltam köszönöm May 2, 2025 at 3:29 PM, Csicskovics Balázs : Anode press 2 nél a robot nem rakja fel az U/W-ra a Rollt. Gyertek légyszíves May 2, 2025 at 3:29 PM, Csicskovics Balázs : Köszönöm May 2, 2025 at 3:29 PM, Oláh András : Coatingon vagyunk amint felszabadulunk, megyünk May 2, 2025 at 3:42 PM, Oláh András : Kész 👍 May 2, 2025 at 4:04 PM, Turianytsia Olesia : Az átvitel nem működik cathode slitt 3 May 2, 2025 at 4:10 PM, Oláh András : Megyünk May 2, 2025 at 4:14 PM, Hári Zoltàn : Katód 2 coater 2-es RW "A" oldalán nem tudjuk használni az AGV-t mert amikor az unloader ráfog a bobinra kiáll hibára a gép. Elvileg a rewinderen található matrica sérült és ezért áll ki hibára! Szeretném kérni a probléma elhárítását, mert jelenleg manuálisan vesszük le a rollokat onnan! Előre is köszönöm! May 2, 2025 at 4:56 PM, Rudyi Volodymyr : Coating cathode2 AGV problem. Thank you May 2, 2025 at 4:56 PM, duzzaman Md (MCS) : @FA KINDLY CHECK E0STKC13_C01 Inv 01 (cv) cp trip THANK YOU May 2, 2025 at 5:00 PM, 한동석 : 양극 2라인 1st리와인더 이재기 작동중 멈춤 발생했습니다. May 2, 2025 at 5:00 PM, 한동석 : A stop occurred during operation of the cathode 2-line 1st rewinder May 2, 2025 at 5:04 PM, Hári Zoltàn : Katód 2 1 es rw agv probléma! Gyertek légyszi! May 2, 2025 at 5:05 PM, Hári Zoltàn : Coater May 2, 2025 at 5:05 PM, Szabadi Miki : Itt vagyunk May 2, 2025 at 5:08 PM, Szabadi Miki : Kész is van már uton hozzá az AGV May 2, 2025 at 5:09 PM, Hári Zoltàn : Király! Köszi! May 2, 2025 at 5:30 PM, 장정훈 : Anode 1 Warehouse AGV Alarm, please Check!!! May 2, 2025 at 6:09 PM, K.Krisz Coating : Sziasztok! Kérek valakit kat 2-re. Kösze May 2, 2025 at 6:09 PM, Simon Attila F. A. : Itt vagyok. May 2, 2025 at 9:07 PM, Yanina : Sziasztok) Cathode slitt 3 nincs AGV 35p May 2, 2025 at 9:08 PM, Simon Attila F. A. : Érkezik... May 2, 2025 at 9:43 PM, Yanina : Szia) Transzfer R/W probléma anód slitt 1 May 2, 2025 at 9:43 PM, Simon Attila F. A. : Megyünk. May 2, 2025 at 9:46 PM, 송치섭 : @FA 양극 2라인 1st리와인더 이재기 작동중 멈춤 발생했습니다. May 2, 2025 at 9:52 PM, 김태현 : @FA cathode 2 stopped. May 2, 2025 at 9:52 PM, 김태현 : AGV May 2, 2025 at 9:53 PM, Viczai Tamás : Kész! May 2, 2025 at 11:47 PM, Yanina : Anód slitt 1 nincs AGV 30p. May 2, 2025 at 11:49 PM, Skwarek Tibor : Úton van May 2, 2025 at 11:59 PM, Yanina : Sziasztok)Cathode slitt nincs tálca May 3, 2025 at 12:23 AM May 3, 2025 at 12:23 AM, Yanina : Anód slitt 3 nincs AGV 25p May 3, 2025 at 12:24 AM, Simon Attila F. A. : Már megy... May 3, 2025 at 12:49 AM, Zsmenyák György : Sziasztok anód Press 3 az AGV nem hozza az anyagot, rá néztek légyszíves! May 3, 2025 at 12:56 AM, Viczai Tamás : Most indul a raktárból az AGV. May 3, 2025 at 12:57 AM, Viczai Tamás : Presz 4-re is! May 3, 2025 at 1:07 AM, Yanina : Anód slitt 1 nincs AGV May 3, 2025 at 1:24 AM, Yanina : 50p. May 3, 2025 at 1:26 AM, Farkas Tamàs : Nincs elérhető anyag a raktárba May 3, 2025 at 1:26 AM, VK (mcs) : LR received but there was no available material Right now RBA0693 is coming. Please wait May 3, 2025 at 1:33 AM, Czél Tamás : Katód oldalon sokat állunk tálcára várással, nem tudtok vele valamit csinálni? Priós lenne a Katód gyártás Köszönöm May 3, 2025 at 1:34 AM, Simon Attila F. A. : This message was deleted. May 3, 2025 at 1:34 AM, Farkas Tamàs : Sajnos sokszor áll meg hibával a daru és ezért sok a feladata, ezért lassú May 3, 2025 at 1:34 AM, Czél Tamás : Ez baj :( May 3, 2025 at 1:47 AM, VK (mcs) : @FA Please check Cathode reel CNV C51 8077 Run time over! May 3, 2025 at 1:52 AM, Skwarek Tibor : Done May 3, 2025 at 2:04 AM, Czeilinger Krisztián : E1PRA030-TR02-MCP, 전송 장치는 버퍼 중앙에 점보 롤을 배치하지 않으므로 보빈의 절반을 한쪽에 배치합니다. 오류: 제조업체에서 비정상 오류로 인해 감지가 중단되었으며 전송은 수동 모드로 홈으로 이동해야 합니다. May 3, 2025 at 5:51 AM, FACS_Bareum kim : ■ 3 May Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Bareum kim May 3, 2025 at 6:00 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STK001_C01 “Material loosening (right)” Thanks May 3, 2025 at 6:02 AM, Rudyi Volodymyr : Good morning. A stop occurred during operation of the cathode 2-line 1st rewinder May 3, 2025 at 6:06 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13+1 overtime Overtime (1): Csanálosi Gábor Sick (0):- Holiday (3):Novák Károly, Nagy Gábor , Novák Zoltán Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Csanálosi Gábor 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 3, 2025 at 6:07 AM, Hári Zoltàn : Gyertek legyszi a katod 2 2es rw rw! May 3, 2025 at 6:07 AM, Hári Zoltàn : Koszi! May 3, 2025 at 6:07 AM, Szabadi Miki : Uton May 3, 2025 at 6:10 AM, Hári Zoltàn : Bocsi, Nem tudta az opi h nem működik az A oldali... May 3, 2025 at 6:10 AM, Szabadi Miki : Oké rendben May 3, 2025 at 6:43 AM, Turianytsia Olesia : Nincs AGV 20 perc cathode slitt 3 May 3, 2025 at 6:43 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check why no agv May 3, 2025 at 6:44 AM, Shahbaz 샤바즈 MCS/RTD : No lot available for CA Slitter 3. May 3, 2025 at 7:52 AM, Yena Valerii : Hello. please come to anode press 3, robot stuck with material May 3, 2025 at 7:53 AM, Szabadi Miki : We are in powder area May 3, 2025 at 7:55 AM, Dániel Hufnágel : Just a moment May 3, 2025 at 9:04 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD please modify E0STKA34_P01! RBA0637 Material now on AGV 23! May 3, 2025 at 9:04 AM, Dániel Hufnágel : And E0STKA34_P01 is empty May 3, 2025 at 9:06 AM, Shahbaz 샤바즈 MCS/RTD : Okay, I am updating the port data. It is loaded as UNK on AGV. May 3, 2025 at 9:06 AM, Dániel Hufnágel : Yes we had machine error, that what caused that! May 3, 2025 at 9:07 AM, Csicskovics Balázs : Cathode press 4 előtt kiállt hibára egy AGV. Gyertek légyszíves Köszönöm May 3, 2025 at 9:19 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD can you please spend back AGV23 to the stocker? May 3, 2025 at 9:19 AM, Dániel Hufnágel : The UNK material May 3, 2025 at 9:27 AM, Shahbaz 샤바즈 MCS/RTD : I created a return command to the roll STK A35. May 3, 2025 at 9:27 AM, Dániel Hufnágel : I see thank you May 3, 2025 at 9:34 AM, Turianytsia Olesia : Nincsenek tálcák cathode slitt 1-2 May 3, 2025 at 9:37 AM, Kiss Balázs F.A. : Kis türelmet May 3, 2025 at 9:37 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD E0STKA34_P01, this port is empty but by the mcs there is a RBA4267 roll. Please check it and delete the data and the order please May 3, 2025 at 9:38 AM, Csicskovics Balázs : @Dániel Hufnágel kérlek gyere az anode press 3 hoz. Köszönöm May 3, 2025 at 9:38 AM, Kiss Balázs F.A. : Raktár dolgozik lassan May 3, 2025 at 9:40 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD IMPORTANT! for anod press 3 its only coming ford material, but it should use Hyundai material! May 3, 2025 at 9:48 AM, Shahbaz 샤바즈 MCS/RTD : Let me check as is set to Hyundai according to RTD next lot. May 3, 2025 at 9:48 AM, Hári Zoltàn : Technikust kérnék a katod 2es jumbo raktarhoz. Nem tudjuk bekuldeni a rollt. Koszi! May 3, 2025 at 9:50 AM, Dániel Hufnágel : Egy pillanat May 3, 2025 at 10:00 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the ford material received at An Press #03. According to log last three rolls were RBA0636, RBA0637 and RBA0243 and they seems to be Hyundai materials May 3, 2025 at 10:03 AM, Szabadi Miki : @Somoskövy Martin May 3, 2025 at 10:12 AM, Somoskövy Martin : RBA4267 is the ID of the material that came to Press 3. May 3, 2025 at 10:19 AM, Shahbaz 샤바즈 MCS/RTD : RBA4267 job was initially created for Press#01, but there was an alarm while loading at the stocker, so it was aborted by Rail-OP action. There is no history indicating that it moved to Press#03. May 3, 2025 at 10:32 AM, Shahbaz 샤바즈 MCS/RTD : @FA @ACS Please check AGV#01 at E0STKA34_P01. Thank you May 3, 2025 at 10:35 AM, Dániel Hufnágel : Please be patient, we have a lot of issue now May 3, 2025 at 11:03 AM, Yena Valerii : This message was deleted. May 3, 2025 at 11:04 AM, Yena Valerii : please check why agv is not delivering material for 3 press anode hyundai May 3, 2025 at 11:05 AM, Szabadi Miki : @Shahbaz 샤바즈 MCS/RTD please check this , thank you! May 3, 2025 at 11:05 AM, Shahbaz 샤바즈 MCS/RTD : Just loaded on AGV#01 and on the way May 3, 2025 at 11:06 AM, Szabadi Miki : Thank you May 3, 2025 at 11:07 AM, KIM SEYEON [김세연]_FA : @서지원 @coater shift leaders 1100x1100mm pallet can interfere AGV route at coater area. I deliver 1200x800mm pallet at outside of electrode washing room. please use this for storing empty bobbins. May 3, 2025 at 11:07 AM, Hári Zoltàn : Perfect! Thanks! We'll change the pallets soon. May 3, 2025 at 11:12 AM, Yena Valerii : thanks May 3, 2025 at 1:24 PM, Majláth Martin : Sziasztok ! Anod press 1 hez tud jonni valaki? Kellene egy kis segítség. May 3, 2025 at 1:46 PM, Turianytsia Olesia : A robot elakadt Anode Slitt 1 May 3, 2025 at 1:47 PM, Oláh András : Technikus dolgozik a gépen, utána újra indítjuk May 3, 2025 at 2:04 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 공트레이 공급이 지연되고있습니다. May 3, 2025 at 2:05 PM, 김대호 (Kim Dae Ho) : 현재 재고가 부족하여 설비를 멈추지않고 가동중인데, 공급이 지연되지않게 확인부탁드립니다. 지금도 양극 슬리팅 2호기 설비가 멈췄습니다. @김건희 May 3, 2025 at 2:06 PM, Somoskövy Martin : A helyzet változatlan. Ránéznétek? Köszönöm. May 3, 2025 at 2:15 PM, Oláh András : Itt vagyunk 👍 May 3, 2025 at 2:20 PM, Oláh András : Kész 👍 May 3, 2025 at 2:24 PM, 김건희 : @KIM SEYEON [김세연]_FA pm님 한번 확인 부탁드립니다 ㅠ May 3, 2025 at 2:24 PM, KIM SEYEON [김세연]_FA : 네 확인중입니다. May 3, 2025 at 2:47 PM, Somoskövy Martin : Anode Slitt 1-en ismételten megállt az átviteli folyamat. Megnéznétek? Köszönöm. May 3, 2025 at 2:48 PM, Oláh András : Megyünk May 3, 2025 at 3:10 PM, Hári Zoltàn : Gyertek legyszi a katod 2 1-es rw re! Itt all 2 robot is de nem mennek a rollert! Koszi! May 3, 2025 at 3:13 PM, Oláh András : Megyünk May 3, 2025 at 3:14 PM, Dániel Hufnágel : Meglett a hiba, már úton May 3, 2025 at 3:16 PM, Oláh András : Szükségünk lenne PLC-s segítségre Anod slitt 1-nél. Minden readyben, de nem tudjuk auto mode-ba kapcsolni a transfert a slitt gépen ezáltal nem veszi le a transfer a slittről May 3, 2025 at 3:22 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AN Roll stk A34 “Light curtain detect error” Thanks May 3, 2025 at 3:44 PM, Shahbaz 샤바즈 MCS/RTD : Also Please check CA Roll stk C33 “Travel lag error” Thanks May 3, 2025 at 3:49 PM, Somoskövy Martin : Egy kóreai technikus kéri hogy valamelyikőtök jöjjön az Anode Slitt 1-re. May 3, 2025 at 3:59 PM, Szabadi Miki : Itt vagyok May 3, 2025 at 5:21 PM, Hári Zoltàn : Gyertek legyszi a katod 1 coatingra 1-es rw probléma! Köszi! May 3, 2025 at 5:21 PM, 김대호 (Kim Dae Ho) : Why isn't the cathode tray coming? May 3, 2025 at 5:22 PM, Mohammad Amir : Good evening, Empty trays on the way ✅. We are monitoring. Thank you very much! May 3, 2025 at 5:24 PM, Dániel Hufnágel : Reel warehauses are have too many jobs, those storages havo too feed so many machine both electrode and assembly! Please be patient, carriers slowly but coming! May 3, 2025 at 5:25 PM, Szabadi Miki : Itt is vagyunk 😁 May 3, 2025 at 5:36 PM, Hári Zoltàn : Bocs már nem látok a szememtől....(stunned) :) May 3, 2025 at 5:38 PM, Szabadi Miki : @Mohammad Amir please delete data (RBC0695) on E0STKC32_P01, this bobbin it's already in the warehouse, only the data remains here. May 3, 2025 at 5:39 PM, Mohammad Amir : Working on it. May 3, 2025 at 5:39 PM, Szabadi Miki : Thank you May 3, 2025 at 5:40 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! May 3, 2025 at 5:43 PM, Mohammad Amir : @Szabadi Miki Please inform me is there any maintenance going on STKA33_C01 ,it is in Open door situation. Thank you very much! May 3, 2025 at 5:57 PM, 방혁 PM(Bang.Hyuk) FA : Sziasztok Night shift FA Technician Schedule Date: 2025.05.03 Time:18:00-06:00 1. Bang hyuk 2. Baek hojong Köszönöm szépen May 3, 2025 at 6:30 PM, Mohammad Amir : @FA @Marsi Gábor Could you please check this issue,it still exists. Thank you very much! May 3, 2025 at 6:31 PM, Mohammad Amir : @FA @Marsi Gábor Please check as well, STKC33_C01 there is Load Collapse Error(Right) ,it is delaying the job for Pressing-3 CA. Thank you very much! May 3, 2025 at 6:34 PM, Skwarek Tibor : Checking May 3, 2025 at 6:35 PM, Skwarek Tibor : Done May 3, 2025 at 6:36 PM, Mohammad Amir : Thank you very much! May 3, 2025 at 6:36 PM, Mohammad Amir : @Skwarek Tibor Could you please check this issue as well. Thank you! May 3, 2025 at 6:39 PM, Skwarek Tibor : That crane not is use a few days ago because of an unsolved error. Waiting for support May 3, 2025 at 6:39 PM, Mohammad Amir : Okay ,thank you for the information. May 3, 2025 at 6:39 PM, Skwarek Tibor : Youre welcome May 3, 2025 at 6:52 PM, Mohammad Amir : @Skwarek Tibor Please inform me is there any maintenance going on STK 31/32 ,it shows under maintenance,and one job is pending. Thank you very much! May 3, 2025 at 6:53 PM, Skwarek Tibor : An or Ca? May 3, 2025 at 6:53 PM, Mohammad Amir : Sorry, CA** Thank you very much! May 3, 2025 at 6:54 PM, Skwarek Tibor : Operators using manual port, thats cause door open error May 3, 2025 at 6:56 PM, Mohammad Amir : Okay,Thank you very much for the confirmation. May 3, 2025 at 7:00 PM, Skwarek Tibor : Youre welcome May 3, 2025 at 9:32 PM, Mohammad Amir : @Skwarek Tibor Please check E0STKC34_P01 there is IPS sensor reading fails error. Thank you! May 3, 2025 at 9:32 PM, Mohammad Amir : Two jobs are pending because of this issue. Thank you very much! May 3, 2025 at 9:33 PM, Skwarek Tibor : Checking May 3, 2025 at 9:33 PM, Mohammad Amir : Thank you very much! May 3, 2025 at 9:34 PM, Skwarek Tibor : It s ok now May 3, 2025 at 9:40 PM, Mohammad Amir : @FA @Skwarek Tibor One job is pending for quite long time as E1SLA050_P01 is OOS . Please check E1SLA050_P01,is there any production or not? Thank you very much! May 3, 2025 at 9:42 PM, Skwarek Tibor : There s no production there May 3, 2025 at 9:43 PM, Mohammad Amir : Please inform me should I cancel the job? For your information,Currently carrier is inside the STK. Thank you very much! May 3, 2025 at 9:44 PM, Skwarek Tibor : Not in use since last week. No one there. May 3, 2025 at 9:46 PM, Mohammad Amir : Okay ,Thank you very much for the information. May 3, 2025 at 9:47 PM, Skwarek Tibor : You re welcome May 3, 2025 at 10:17 PM, 김건희 : @Baek Hojong(백호종)FA PM님 양극 Reel tray가 20분 정도 안 오고 있었다고 하는데 확인 가능하실까요? May 3, 2025 at 10:17 PM, Baek Hojong(백호종)FA : 확인하겠습니다 May 3, 2025 at 10:19 PM, Baek Hojong(백호종)FA : CCS확인결과 정상적으로 가고있는데 양극 슬리터 몇호기로 오지 않는다고 하던가요? 피엠님! May 3, 2025 at 10:23 PM, 김건희 : 2호기였습니다! May 4, 2025 at 12:43 AM May 4, 2025 at 12:43 AM, Mohammad Amir : @Skwarek Tibor Please check E0STKC31_C01 there is SCP Main Power CP trip error. Thank you! May 4, 2025 at 12:58 AM, Yanina : Sziasztok, Anód slitt 1 nincs AGV 60p May 4, 2025 at 12:58 AM, Mohammad Amir : Checking May 4, 2025 at 12:59 AM, Mohammad Amir : Issue has been resolved ✅. AGV#25 on the way. Thank you very much! May 4, 2025 at 5:54 AM, Somoskövy Martin : Sziasztok. Anode Press 2 és 5 között egy keresztbe állt AGV feltartja az anyaggal közlekedő AGV-ket. Ránéznétek? Köszönöm. May 4, 2025 at 6:01 AM, Oláh András : Megyünk May 4, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+1 overtime Overtime (1): Csanálosi Gábor Sick (1):Kiss Balázs Holiday (3): Nagy Gábor , Novák Zoltán , Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: , Nagy Zsolt, Csanálosi Gábor, Novák Károly 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 4, 2025 at 7:24 AM, Yena Valerii : Hello please come to the 2nd press anode, the robot with the material that should put it into the press installation is stuck May 4, 2025 at 7:25 AM, Oláh András : Coming May 4, 2025 at 8:47 AM, 김대호 (Kim Dae Ho) : Cathode sliter 2 Please check the error. May 4, 2025 at 8:47 AM, Oláh András : Coming May 4, 2025 at 9:14 AM, Somoskövy Martin : Cathode Slitt 2-őn kiállt a conveyor PIO complete on time over hibára. Ránéznétek? Köszönöm. May 4, 2025 at 9:14 AM, Oláh András : Megint? May 4, 2025 at 10:39 AM, Turianytsia Olesia : A szállítószalag nem működik. Cathode slitt 3 May 4, 2025 at 10:39 AM, Szabadi Miki : Megyünk May 4, 2025 at 12:06 PM, Turianytsia Olesia : A szállítószalag nem működik. Cathode slitt 3 May 4, 2025 at 12:06 PM, Oláh András : Kis türelem sok a hiba May 4, 2025 at 12:11 PM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD please send chatode side coater AGV#2 with material RBC0923 to the storage! Thank you! May 4, 2025 at 12:13 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created. May 4, 2025 at 12:14 PM, Dániel Hufnágel : Thank you! May 4, 2025 at 12:14 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome! May 4, 2025 at 12:33 PM, Csicskovics Balázs : Anode press 2 R/W hez valaki jöjjön. Köszönöm May 4, 2025 at 12:34 PM, Oláh András : Megyünk May 4, 2025 at 12:34 PM, Csicskovics Balázs : Köszönöm May 4, 2025 at 12:38 PM, Yena Valerii : please come to the 2nd press anode May 4, 2025 at 1:10 PM, Turianytsia Olesia : A szállítószalag nem működik. Cathode slitt 3 May 4, 2025 at 1:11 PM, Szabadi Miki : Megyünk May 4, 2025 at 1:32 PM, Yena Valerii : please come to the 1st press anode, something happened with the robot that puts the material on the agv May 4, 2025 at 2:12 PM, Horváth Attila : Katod 1 megállt a robot May 4, 2025 at 2:12 PM, Horváth Attila : Gyertek lécci May 4, 2025 at 2:13 PM, Szabadi Miki : Press,Slitt,Coating? May 4, 2025 at 2:13 PM, Horváth Attila : Elindult May 4, 2025 at 2:50 PM, Turianytsia Olesia : Nincs AGV 15 perc Cathode slitt 1-2 May 4, 2025 at 2:51 PM, Shahbaz 샤바즈 MCS/RTD : Currently No lot available for CA Slitter unit - 1/2 May 4, 2025 at 3:07 PM, Csicskovics Balázs : Gyertek légyszíves Cathode roll raktárba Köszönöm May 4, 2025 at 3:07 PM, Oláh András : Rohanunk 😅 May 4, 2025 at 4:21 PM, Yena Valerii : please come to the 2nd press anode May 4, 2025 at 5:12 PM, 최재균 invited 고형렬, 주명기, 심재윤 and 이건아. May 4, 2025 at 5:42 PM, FACS_Bareum kim left this chatroom. May 4, 2025 at 7:19 PM, Yanina : Sziasztok, Cathode slitt 1 nincs AGV 30p. May 4, 2025 at 7:27 PM, VK (mcs) : There is no available material May 4, 2025 at 8:34 PM, Yanina : Szia, Anód slitt 1 transzfer probléma R/W May 4, 2025 at 8:35 PM, Skwarek Tibor : Megyünk May 4, 2025 at 9:25 PM, Czél Tamás : Valaki tudna jönni anód press 2-höz pls? Köszönöm May 4, 2025 at 9:25 PM, Viczai Tamás : Megyünk May 5, 2025 at 2:18 AM May 5, 2025 at 2:18 AM, 류종석(RyuJongSeok) : 코팅 양극 1라인 외주세요 May 5, 2025 at 2:19 AM, 류종석(RyuJongSeok) : @Baek Hojong(백호종)FA 코팅 양극 1라인 와주시겠습니까? May 5, 2025 at 2:19 AM, Baek Hojong(백호종)FA : 넵 May 5, 2025 at 2:52 AM, Czél Tamás : Sziasztok Anódon nem jönnek a tálcák. Rá tudnátok nézni? Köszönöm May 5, 2025 at 2:55 AM, Skwarek Tibor : Gond van a liftnél, dolgozunk rajta May 5, 2025 at 3:20 AM, na1tis : Hello,Cathode Press 1,problem R/W,not working May 5, 2025 at 3:20 AM, na1tis : Help me Please May 5, 2025 at 3:22 AM, Viczai Tamás : Megyünk May 5, 2025 at 3:24 AM, Yanina : Press Cathode 2 probléma transzfer R/W , nem 1 May 5, 2025 at 3:25 AM, Skwarek Tibor : This message was deleted. May 5, 2025 at 3:48 AM, Koska Szilárd János : Sziasztok megnéznétek miért szórakoztak fel az agv Anód press 1_2 mögött May 5, 2025 at 3:49 AM, Czél Tamás : Te vagy már felszórakozva 🤣🤣 May 5, 2025 at 3:49 AM, Viczai Tamás : Már elindult! May 5, 2025 at 3:53 AM, Mucsenbacher_Jozsef : Sziasztok . Fóliaraktárnál szeretnek egy kis segítséget kérni . Letiltott May 5, 2025 at 3:53 AM, Koska Szilárd János : Jólvan na May 5, 2025 at 3:54 AM, Viczai Tamás : Megyünk May 5, 2025 at 6:10 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Szabadi Miklós, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladat May 5, 2025 at 6:17 AM, Viktoriia Hleba : Sziasztok. 1 slitter cathode nincs AGV - 60 perc May 5, 2025 at 6:21 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AGV#14 having job for Ca Slitter#01 is blocked by AGV#13 near CA Press #02 Thanks May 5, 2025 at 6:22 AM, Szabadi Miki : This message was deleted. May 5, 2025 at 6:22 AM, Szabadi Miki : Checking May 5, 2025 at 6:29 AM, Szarka Adrián : Sziasztok jó reggelt Szeretnénk ma kérni egy nagyobb támogatást katod Slitt gépekre, mert azt az infót kaptuk hogy a reel raktár le áll egyfolytában és ezért lassan jönnek a reel talcak is. Ha nem termelünk a reel raktár miatt le fog állni Assy. Kerlek erre figyeljetek. Köszönöm szépen May 5, 2025 at 6:32 AM, Erik Gerzsenyi : Sziasztok! Nezzetek mar utana legyszives mi az oka annak, hogy katod slitt 1-re 69 perc utan hozza ki az AGV az anyagot May 5, 2025 at 6:32 AM, Erik Gerzsenyi : Koszonom May 5, 2025 at 6:34 AM, Szabadi Miki : Press 2 mögött keletkezett egy agv blokád és ez akadályozta a mozgást amit ott volt az ut mellett roll kocsik azok miatt keletkezett a fennakadás May 5, 2025 at 6:39 AM, Erik Gerzsenyi : Koszi May 5, 2025 at 6:39 AM, Szabadi Miki : Igazán nincs mit May 5, 2025 at 6:48 AM, Viktoriia Hleba : 2 slitter cathode r/w robot stop. May 5, 2025 at 6:49 AM, Szabadi Miki : Megyünk May 5, 2025 at 7:13 AM, Viktoriia Hleba : 1 slitter cathode nincs AGV-25 perc May 5, 2025 at 7:14 AM, Szabadi Miki : @Shahbaz 샤바즈 MCS/RTD please check this May 5, 2025 at 7:14 AM, Anton Mashchenko : Hello, cathode press 1, R/W robot error! Help! Thanks! May 5, 2025 at 7:14 AM, Szabadi Miki : Checking May 5, 2025 at 7:15 AM, Shahbaz 샤바즈 MCS/RTD : Currently no lot available. May 5, 2025 at 7:15 AM, Szabadi Miki : Thank you May 5, 2025 at 7:16 AM, Szabadi Miki : Nincs anyag 😔 May 5, 2025 at 7:18 AM, Szarka Adrián : 70 ezer méter van még a raktárban May 5, 2025 at 7:18 AM, Szarka Adrián : Akkor miért nem hozza ? May 5, 2025 at 7:24 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD, after filtering the data, there is no material available. It’s possible that the available material is not suitable for Slitter 1/2 or there may be another issue. Could you please provide some Carrier IDs so I can cross-check? Thank you. May 5, 2025 at 7:35 AM, Szarka Adrián : EC1P073F521921 EC1P073F440942 May 5, 2025 at 7:43 AM, Rácz Dániel / FA : @Viktor Vadas gyere légyszíves az A34 es raktárhoz. Köszi May 5, 2025 at 7:49 AM, Shahbaz 샤바즈 MCS/RTD : RBC1124 (EC1P073F521921) MES issue RBC4078 (EC1P073F440942) already released to slitter #04 on 01/04/2025 May 5, 2025 at 7:51 AM, FACS_오창훈_CHANGHOON : ■ 5th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 2people □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok May 5, 2025 at 8:07 AM, Rácz Dániel / FA : @Szappanos Gábor Coatingon ha nem használtok AGV-ket, akkor lekapcsolhatjuk őket ? Hogy a töltőre való mozgás közben ne akadályozzon titeket ? May 5, 2025 at 8:07 AM, FACS_JaewonShin : ■ 5th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 5, 2025 at 8:10 AM, Rácz Dániel / FA : Elektróda AN-CA roll raktárak kioszk fiókjaiból a szemét eltávolítva. May 5, 2025 at 8:15 AM, Szappanos Gábor : Úgy legyen May 5, 2025 at 8:17 AM, Rácz Dániel / FA : Köszi May 5, 2025 at 8:18 AM, 배병민 (Bae Byoungmin) : Do not turn off the power of the Cotter AGV. May 5, 2025 at 8:23 AM, Rácz Dániel / FA : Okey, Sir. 🫡 May 5, 2025 at 8:57 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AN reel CNV A51 track 6006,6007 “INV runtime over error.” Thanks May 5, 2025 at 8:57 AM, Nagy Dávid 4 : This message was deleted. May 5, 2025 at 8:57 AM, Rácz Dániel / FA : Itt vagyunk, kész. May 5, 2025 at 8:57 AM, Rácz Dániel / FA : Solved May 5, 2025 at 8:58 AM, Rácz Dániel / FA : The full reel tray stuck. May 5, 2025 at 9:01 AM, Rácz Dániel / FA : LTC1604 the reel tray again stuck May 5, 2025 at 9:16 AM, Szarka Adrián : Anod slitt2 nincs talca nézzetek ra kerlek köszi May 5, 2025 at 9:27 AM, Szabadi Miki : Nézzük May 5, 2025 at 9:28 AM, Szücs Géza FT-B : jönnek azok csak lassan May 5, 2025 at 9:29 AM, Szarka Adrián : Pont ez a baj reggel írtam be, hogy meg áll Assy miattunk mert nem tudjuk tölteni a raktárát mert lassan jönnek a tálcák May 5, 2025 at 9:35 AM, Viktoriia Hleba : 1 slitter cathode nincs AGV - 25 perc May 5, 2025 at 9:37 AM, Shahbaz 샤바즈 MCS/RTD : Currently no lot available for CA Slitter unit #1/2 May 5, 2025 at 9:37 AM, Szabadi Miki : @Shahbaz 샤바즈 MCS/RTD please check , thank you! May 5, 2025 at 9:38 AM, Nagy Dávid 4 : Anod slitt 2 robot probléma help help köszönöm szépen May 5, 2025 at 9:38 AM, Szabadi Miki : Itt vagyunk segitünk May 5, 2025 at 9:41 AM, Anton Mashchenko : Cathode press 2, The AGV needs to be moved to another location! Help! May 5, 2025 at 9:43 AM, Viktoriia Hleba : 2 slitter cathode nincs tálca May 5, 2025 at 10:06 AM, Jun(정우준)_SKOH FA : @manufacture. 금일주간 프레스 슬리터 생산 담당자 연락부탁드립니다. May 5, 2025 at 10:10 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 공트레이 공급이 지연되고있습니다. 컨베이어에 몇개 없는 상태입니다. May 5, 2025 at 10:11 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 agv is not coming. Why??? May 5, 2025 at 10:17 AM, Shahbaz 샤바즈 MCS/RTD : Because no material available at the moment. May 5, 2025 at 11:08 AM, Sazzad Bhai SKon : @FA Is the slitter machine anode line 4/5 is working? We have pending jobs for long time May 5, 2025 at 11:09 AM, Szücs Géza FT-B : no May 5, 2025 at 11:17 AM, KIM SEYEON [김세연]_FA : @김대호 (Kim Dae Ho) 조장님 사용가능 자재 자체가 없는 상황에서는 mes에 비가동이 어떤것으로 들어가나요? May 5, 2025 at 11:17 AM, Sazzad Bhai SKon : Thank you, we will delete this job because this is keeping daemon server busy. When the machine becomes online, please raise LR again. Thank you May 5, 2025 at 11:21 AM, 장정훈 : Please check the cathode STK P01 port! May 5, 2025 at 11:22 AM, Sazzad Bhai SKon : E0STKC31_ P01 has a pending job, AGV on the way May 5, 2025 at 11:25 AM, 장정훈 : STK05, P01 AGV's not moving. Can you check? May 5, 2025 at 11:27 AM, Sazzad Bhai SKon : There is no bobbin here. May 5, 2025 at 11:28 AM, 서지원 : @KIM SEYEON [김세연]_FA 안녕하세요 펨님! 명일 음극 코팅 4라인 R@R 오전 9시부터 진행예정입니다. 금일은 오후 4~5시부터 음극 코팅 4라인 연습생산 진행 예정이니 참고부탁드립니다. May 5, 2025 at 11:28 AM, 김대호 (Kim Dae Ho) : 비가동 항목에 해당 내용이 없어 생산준비에 대부분 넣는걸로 알고있습니다! May 5, 2025 at 11:29 AM, Sazzad Bhai SKon : It has a job for RBC1842, but The port has alarm . MCS order is normal May 5, 2025 at 11:29 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. May 5, 2025 at 11:34 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 연습 생산시 AGV 사용하면서 진행해도 될까요? 준비는 다된 상황이며 AGV 이동 동선 자재정리만되면 사용가능합니다 May 5, 2025 at 11:40 AM, 장정훈 : Please ask the technician to take action! May 5, 2025 at 11:46 AM, Viktoriia Hleba : 2 slitter cathode nincs tálca May 5, 2025 at 11:46 AM, Szarka Adrián : Katod Slitt nincs reel talca nézzetek meg kerlek May 5, 2025 at 11:47 AM, Rácz Dániel / FA : Nézzük May 5, 2025 at 11:49 AM, Sazzad Bhai SKon : @FA Please check E0STKC35_P01 Alarm: power servo is OFF May 5, 2025 at 11:53 AM, Rácz Dániel / FA : Solved May 5, 2025 at 11:54 AM, KIM SEYEON [김세연]_FA : @서지원 4라인 동선 깔끔합니다! 감사합니다. May 5, 2025 at 11:57 AM, Rácz Dániel / FA : Mennek csak nagyon lassan 😞 May 5, 2025 at 12:00 PM, Szarka Adrián : Ez ellen fognak valamit valamikor csinálni ? Ez megy hetek óta sajnos. May 5, 2025 at 12:01 PM, Rácz Dániel / FA : @Szücs Géza FT-B May 5, 2025 at 12:02 PM, Sazzad Bhai SKon : Thank you, RBC1842 stored successfully. May 5, 2025 at 12:03 PM, Rácz Dániel / FA : Thank you for the information Sir ! 🫡 May 5, 2025 at 12:53 PM, Szarka Adrián : Sziasztok anod Sl asztalnál az 1 számú agv csak úgy el kezdett zenélni álló helyzetében. Gyertek kerlek köszi May 5, 2025 at 12:54 PM, Szabadi Miki : Megyünk May 5, 2025 at 12:54 PM, Rácz Dániel / FA : Milyen számot játszik ? 🤣 May 5, 2025 at 12:55 PM, Szarka Adrián : Nagyon király. Számát nem tudom de tetszik 🤣🤣🤣🤣🤣 May 5, 2025 at 12:55 PM, Csanálosi Gábor FA : Zámbó Jimmy "Egyszer megjavulok én..." May 5, 2025 at 1:22 PM, Viktoriia Hleba : 3 slitter cathode convejor stop. May 5, 2025 at 1:24 PM, Szarka Adrián : 3 slitter cathode convejor stop. May 5, 2025 at 1:24 PM, Szarka Adrián : Gyertek legyszi May 5, 2025 at 1:25 PM, Szabadi Miki : Már kész May 5, 2025 at 1:42 PM, 서지원 : 네네 시프트리더에게 요청해서 해당 동선 정리 요청했고, 연습생산 2시간을 비가동 없이 채워야하는 상황이라 그 이후에 agv 사용해보는건 어떨까요?? May 5, 2025 at 1:43 PM, Nagy Dávid 4 : Anod roll raktár 24 számú agv kiált hibára help help köszönöm szépen May 5, 2025 at 1:44 PM, Rácz Dániel / FA : Jövünk May 5, 2025 at 2:11 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 감사합니다 May 5, 2025 at 2:40 PM, Erik Gerzsenyi : Katod slitt 2 U/W kiallt hibara az AGV May 5, 2025 at 2:40 PM, Erik Gerzsenyi : Nezzetek ra legyszi May 5, 2025 at 2:41 PM, Rácz Dániel / FA : Megyünk May 5, 2025 at 3:22 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check LTA1188 at E0CNVA51_0634. It’s not from there for a while. Thanks May 5, 2025 at 3:24 PM, Szappanos Gábor : Hali. Anód roll 1 es raktár pirosba. Légyszives nézétek meg. Köszi May 5, 2025 at 3:25 PM, Szarka Adrián : Anod Slitt nem jön a talca. Nézzetek ra kerlek May 5, 2025 at 3:38 PM, 장정훈 : @Fa Anode Conveyor LTA1188 is not moving. Please Check!! May 5, 2025 at 3:40 PM, 장정훈 : I took care of it! May 5, 2025 at 3:50 PM, Szabadi Miki : Checking May 5, 2025 at 4:42 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD E0CNVC51 is full, because lots of order in E0STKC52 Pleasr help ! May 5, 2025 at 4:52 PM, Nagy Dávid 4 : Katod press 1-es gép mögött az agv kiált hibára help help köszönöm szépen May 5, 2025 at 4:53 PM, Rácz Dániel / FA : Jövünk May 5, 2025 at 5:29 PM, Szarka Adrián : nincs tálca katod Slitt May 5, 2025 at 5:29 PM, Szarka Adrián : Gyertek kerlek mert nem állhat meg a termelés May 5, 2025 at 5:36 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Need empty reel tray SOS CA slitt machines. Thank you May 5, 2025 at 5:37 PM, Shahbaz 샤바즈 MCS/RTD : Empty reel trays are on the way. May 5, 2025 at 5:37 PM, 송치섭 : @FA Please come to anode #1 line May 5, 2025 at 5:38 PM, Rácz Dániel / FA : Thank you Sir ! 🫡 May 5, 2025 at 5:41 PM, 송치섭 : @FA Please come to the coating anode #1 line May 5, 2025 at 5:46 PM, 배병민 (Bae Byoungmin) : 조치됬습니다 May 5, 2025 at 5:47 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Foil stk 002 “MCP Control Power Cp Trip” Thanks May 5, 2025 at 5:48 PM, 송치섭 : 확인했습니다 May 5, 2025 at 6:02 PM, Mohammad Amir : @FA Please check Foil stk 002 “MCP Control Power Cp Trip” Thank you! May 5, 2025 at 6:02 PM, Mohammad Amir : This error exists since 17:32. Thank you very much! May 5, 2025 at 6:06 PM, 김대호 (Kim Dae Ho) : Please check the Cathode Press 2 error May 5, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 5, 2025 at 6:27 PM, Vlad Danilevskyi : Hello. Error on cathode press 2 is still not fixed. Thanks May 5, 2025 at 6:29 PM, 김대호 (Kim Dae Ho) : Why don't you respond? May 5, 2025 at 6:29 PM, 김대호 (Kim Dae Ho) : The facility has stopped. May 5, 2025 at 6:29 PM, Mr.Miti (미티) FA : Im coming May 5, 2025 at 6:37 PM, Mr.Miti (미티) FA : Solved May 5, 2025 at 6:37 PM, Mohammad Amir : @FA @adambenczik This error still exists since 17:32, please check. Thank you very much! May 5, 2025 at 6:38 PM, Mr.Miti (미티) FA : Checking. May 5, 2025 at 6:42 PM, Mr.Miti (미티) FA : Solved May 5, 2025 at 6:47 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 6:49 PM, Mr.Miti (미티) FA : You’re welcome May 5, 2025 at 7:06 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.05 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo: lee minjae Köszönöm szépen May 5, 2025 at 7:53 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check LTA0969 located at E0STKA51_P03 it is not moving and because of this there is a lot of materials waiting on the CNVC51. Everything is good from MCS/RTD side. ✅ Please check physically. Thank you very much! May 5, 2025 at 7:54 PM, Mr.Miti (미티) FA : Checking May 5, 2025 at 7:57 PM, Mr.Miti (미티) FA : Solved May 5, 2025 at 7:57 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 8:05 PM, 서지원 : 음극 코팅 1라인 2nd 리와인더 이재기에 롤 안착한 상태로 20분째 멈춰있습니다. 공보빈 척킹 불가능하여 코팅 멈춰야하는데 담당자 없으신가요??? May 5, 2025 at 8:06 PM, 서지원 : 현지 테크니션 인력도 주변에 없습니다. May 5, 2025 at 8:07 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check May 5, 2025 at 8:07 PM, KIM SEYEON [김세연]_FA : 전화드리겠습니다. May 5, 2025 at 8:10 PM, 서지원 : 공보빈 못 연결한채로 리와인더 경이 너무 커져서 설비 손상 위험있어서 멈췄습니다. May 5, 2025 at 8:11 PM, 배병민 (Bae Byoungmin) : 네 제가 지금 현장 가는중입니다 May 5, 2025 at 8:14 PM, adambenczik : Solved May 5, 2025 at 8:16 PM, KIM SEYEON [김세연]_FA : what was the alarm ? May 5, 2025 at 8:20 PM, adambenczik : When I got there, there was a AGV in the light curtain, waiting for the transfer to be restarted May 5, 2025 at 8:22 PM, adambenczik : Couldn't restart the transfer, becouse the AGV was in the light curtain. I moved the AGV out, and restarted the transfer May 5, 2025 at 8:22 PM, 배병민 (Bae Byoungmin) : 리트라이로 멈춰있었습니다 May 5, 2025 at 8:22 PM, 연해리 : @Mr.Miti (미티) FA Hello Miti. Same problem is occured. Please check it again. May 5, 2025 at 8:34 PM, Szeitz Flórián : Sziasztok! Anód -katod oldalon nem jönnek az üres tálcák. Légyszives nézzétek meg. Köszönöm May 5, 2025 at 8:34 PM, Mohammad Amir : Checking May 5, 2025 at 8:38 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKC51_C01/02 and E0STKC52_C01/C02 these cranes are inactive without error and because of this issue cathode reels delivery has been stopped. Thank you very much! May 5, 2025 at 8:39 PM, Mohammad Amir : For the above reason Cathode empty trays delivery has been stopped. For Anode , Empty trays on the way ✅,I have given priorities to some trays delivery so that production can continue please let me know if you need Empty trays faster. Thank you very much! May 5, 2025 at 8:39 PM, Mohammad Amir : Cathode empty trays*** May 5, 2025 at 8:42 PM, Mohammad Amir : @Mr.Miti (미티) FA Please also check E0STKA51_C01/C02 it is also inactive without an error. Thank you very much! May 5, 2025 at 8:42 PM, Mr.Miti (미티) FA : C5-52 moving May 5, 2025 at 8:43 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 8:43 PM, Mr.Miti (미티) FA : A51 moving May 5, 2025 at 8:43 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 8:45 PM, Mr.Miti (미티) FA : You’re welcome May 5, 2025 at 8:47 PM, Mohammad Amir : For your information: CATHODE AND ANODE both empty trays delivery has been normalized ✅. Please feel free to contact me again if you face any issue. Thank you very much! May 5, 2025 at 9:10 PM, Szeitz Flórián : Sziasztok! Anód Slitt 2 nèl megállt a Conveyor pálya. Légyszives Gyertek köszönöm. May 5, 2025 at 9:24 PM, Mohammad Amir : @FA @adambenczik Please check E0CNVA51_06-008 there is Tray wrong position error. Thank you very much! May 5, 2025 at 9:28 PM, Mr.Miti (미티) FA : @Mohammad Amir Hello! Please check anode slitt 1-2 avaible material. Agv-s dont come. Thank you! May 5, 2025 at 9:28 PM, Mohammad Amir : Checking May 5, 2025 at 9:30 PM, Mohammad Amir : Currently there is no transferable material available which is appropriate for Slitter Anonde 1 &2. We have active LR already as soon as materials will be available jobs will be created. Thank you very much! May 5, 2025 at 9:31 PM, Mr.Miti (미티) FA : Thank you very much! May 5, 2025 at 9:31 PM, Mohammad Amir : You are welcome! May 5, 2025 at 9:36 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKC51_C01/02 these cranes are inactive without error and because of this issue cathode empty trays delivery has been stopped. Thank you very much! May 5, 2025 at 9:43 PM, Mr.Miti (미티) FA : Okay May 5, 2025 at 9:48 PM, Mr.Miti (미티) FA : Done May 5, 2025 at 9:48 PM, Mr.Miti (미티) FA : (thumbsup) May 5, 2025 at 9:48 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 9:48 PM, Mr.Miti (미티) FA : You’re welcome! May 5, 2025 at 9:55 PM, Kurgya Attila : Sziasztok Nem használhatjuk az agv-ket anod 1es soron sem. Légyszíves vigyétek innen akkor őket mert akadályoznak minket a munkánkban. Köszi May 5, 2025 at 9:56 PM, adambenczik : Megyek May 5, 2025 at 11:24 PM, Mohammad Amir : @adambenczik Please check E0STKA31_M01 there is Data off,sensor on overtime error. Thank you! May 5, 2025 at 11:24 PM, Mr.Miti (미티) FA : yes because they left some material on the manual port May 5, 2025 at 11:26 PM, Mohammad Amir : Okay , Thank you! May 5, 2025 at 11:26 PM, Mr.Miti (미티) FA : You’re welcome? May 5, 2025 at 11:26 PM, Mr.Miti (미티) FA : ! May 6, 2025 at 12:19 AM May 6, 2025 at 12:19 AM, Szeitz Flórián : Anód slitt re nagyon lassan érkeznek az üres tálcák. May 6, 2025 at 12:22 AM, Mohammad Amir : Empty trays on the way ✅. Just there are a lot of transfers that's why you are witnessing delay. I am monitoring. Thank you very much! May 6, 2025 at 12:49 AM, Szeitz Flórián : Sziasztok! Katód press 3 R/W. Leszedő robot nem fogott rá a Bobinra , megállt. Légyszives gyertek és nézzétek meg. Köszönöm May 6, 2025 at 1:15 AM, adambenczik : Kész May 6, 2025 at 1:31 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 2 nincsenek tálcák May 6, 2025 at 1:31 AM, Karina Lyzanets : Köszönöm May 6, 2025 at 1:31 AM, Mohammad Amir : Checking May 6, 2025 at 1:32 AM, Mr.Miti (미티) FA : Raktár probléma miatt nincs jelenleg tálca. Kis türelmet a hiba elhárításán dolgozunk. May 6, 2025 at 1:32 AM, Mohammad Amir : Empty trays on the way ✅. There's is issue with STKC51 that's why you witnessed delay. Thank you very much! May 6, 2025 at 1:35 AM, Mohammad Amir : Trays delivery will be slow as currently empty trays are only getting delivered from STKC52. Currently two trays in the way . As soon as STKC51 will be repaired speed will increase. Thank you very much! May 6, 2025 at 2:53 AM, Vászon Márton : AGV 21 pirosan villog a katód pressz 4 mögött blokkolja majd a többit. Köszi May 6, 2025 at 5:35 AM, Mohammad Amir : @adambenczik Please check E0STKC33_C01 there is travel Lag Error. Thank you! May 6, 2025 at 5:43 AM, Karina Lyzanets : Sziasztok! Sziasztok! Katód oldalon megállt a Conveyor pálya. Légyszives nézzétek meg. Köszönöm szépen May 6, 2025 at 5:49 AM, Szücs Géza FT-B : megy, de nem lesz gyors May 6, 2025 at 5:58 AM, Rácz Dániel / FA : Jövök May 6, 2025 at 5:58 AM, Mr.Miti (미티) FA : Már ne menj May 6, 2025 at 5:59 AM, Mr.Miti (미티) FA : Megy csak lassan May 6, 2025 at 5:59 AM, Mr.Miti (미티) FA : Néztük May 6, 2025 at 5:59 AM, Rácz Dániel / FA : Teli reelek feltorlódtak May 6, 2025 at 6:02 AM, Mr.Miti (미티) FA : Tudom én is azt mondom May 6, 2025 at 6:02 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 1Sl Overtime(1): Szabadi Miklós, Novák Károly Holiday(1): Czeilinger Krisztián Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Szabadi Miklós, Rácz Dániel --------------- Assy GF (4): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása v May 6, 2025 at 6:07 AM, Rácz Dániel / FA : Katód conveyoron lévő teli reel tálcák átirányítva az 52 es raktárba May 6, 2025 at 7:37 AM, Rácz Dániel / FA : Anód conveyoron lévő teli reel tálcák átirányítva az 52 es raktárba May 6, 2025 at 8:15 AM, FACS_오창훈_CHANGHOON : Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 2people □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok May 6, 2025 at 8:28 AM, FACS_JaewonShin : ■ 6th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 6, 2025 at 9:14 AM, Viktoriia Hleba : Sziasztok. 2 slitter cathode nincs tálca. May 6, 2025 at 9:16 AM, Szabadi Miki : Jön csak lassan sajnos , türelmet kérünk. May 6, 2025 at 9:31 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 공트레이 공급 확인 부탁드립니다. May 6, 2025 at 9:35 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 2호기 설비 멈추었고 슬리팅 1, 3호기도 곧 멈출것같습니다. May 6, 2025 at 9:38 AM, 김주연 : 공트레이 반송 중입니다. May 6, 2025 at 9:50 AM, 김대호 (Kim Dae Ho) : 공트레이 공급 속도가 느린 상태입니다. 현재도 1층 컨베이어에는 공트레이가 1개도 없습니다. May 6, 2025 at 9:55 AM, Viktoriia Hleba : 2 slitter nincs tálca May 6, 2025 at 9:55 AM, Viktoriia Hleba : cathode May 6, 2025 at 9:56 AM, Viktoriia Hleba : Is there anything that can be done about this? May 6, 2025 at 9:57 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 1, 2, 3 호기 공트레이 지연 설비 정지중입니다. @김건희 May 6, 2025 at 9:57 AM, Viktoriia Hleba : 1-2-3 slitter cathode stop. Nincs tálca May 6, 2025 at 9:58 AM, 김주연 : 일부 우선순위 조정해가며 반송하겠습니다 지금 추가반송중입니다 May 6, 2025 at 9:58 AM, Sazzad Bhai SKon : Checking empty magazines May 6, 2025 at 9:58 AM, 김대호 (Kim Dae Ho) : 감사합니다. May 6, 2025 at 9:59 AM, Rácz Dániel / FA : Sajnos nagyon lassan szolgálnak ki a raktárak, mind a teli reel tálcák lassan mennek be illetve az üresek pedig lassan jönnek ki. Az assembly terület rengeteg feladatod a raktáraknak, hogy az ő gépeik se álljanak le. May 6, 2025 at 9:59 AM, Sazzad Bhai SKon : **empty trays are on the way May 6, 2025 at 10:00 AM, Rácz Dániel / FA : Thank you May 6, 2025 at 10:04 AM, Szarka Adrián : 1-2 slitt cathode nincs tálca May 6, 2025 at 10:04 AM, Szarka Adrián : Tudtok valamit csinálni ? Köszönöm May 6, 2025 at 10:07 AM, Rácz Dániel / FA : Folyamatosan jelezzük, biztosan fogalakoznak a problémával. Személy szerint annyit tudunk tenni hogy továbbítjuk az információt. A teli reel tálcákat is átkell irányítanunk mind a két oldalon az 52-es be hogy ne teljen fel a conveyor, mert az 51-es raktár nem bírja el. May 6, 2025 at 10:19 AM, 김건희 : @KIM SEYEON [김세연]_FA 음극 4라인 P/S 예상 시작 시간 전달 드립니다 Anode Press :11:00~17:00 Anode slitter :12:00~18:00 May 6, 2025 at 10:20 AM, Viktoriia Hleba : 1-2 -3 slitter cathode nincs tálca May 6, 2025 at 10:21 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 1, 2, 3 공트레이 또 없습니다. May 6, 2025 at 10:22 AM, Rácz Dániel / FA : Igen nincs még mindig, mert a 2 es lift nél volt egy teli reel tálca probléma, de sikeresen elhárítottuk az Assy GF kollégákkal. May 6, 2025 at 10:23 AM, Szarka Adrián : Azt meg köszönöm ha jelzed mindig. Mert jó lenne ha történne végre valami javítás vagy akármi. Mert ez kicsit durva hogy semmi változás nincs hetek óta May 6, 2025 at 10:23 AM, Rácz Dániel / FA : Úton vannak csak nagyon lassan. May 6, 2025 at 10:25 AM, Viktoriia Hleba : csak 1 tálca van :( May 6, 2025 at 10:25 AM, Koncz Tamás : Mi is csak továbbítani tudjuk a hibát, alternatív lehetőségekkel próbáljuk kivédeni addig is a kiesét, mint hogy átirányítják az 52-esbe a tálcákat... May 6, 2025 at 10:26 AM, Rácz Dániel / FA : 3 db már a conveyoron van, nem sokára megérkezik. May 6, 2025 at 10:27 AM, Szarka Adrián : Tudom hogy nem a ti hibatok 👍👍 May 6, 2025 at 10:47 AM, Viktoriia Hleba : 1/2/3 nincs tálca May 6, 2025 at 10:48 AM, Sazzad Bhai SKon : Reel STK crane is busy. We're monitoring May 6, 2025 at 11:00 AM, Sazzad Bhai SKon : Reel STK transport order is getting normal. Trays are on the way May 6, 2025 at 11:11 AM, 김대호 (Kim Dae Ho) : Does Trey keep coming? It stops again at this rate. May 6, 2025 at 11:11 AM, Viktoriia Hleba : 2 slitter cathodr nincs tálca May 6, 2025 at 11:13 AM, Sazzad Bhai SKon : Yes coming, May 6, 2025 at 11:15 AM, 김대호 (Kim Dae Ho) : The facility continues to stop due to delayed supply of Cathode slitting We are currently receiving feedback due to lack of assembly inventory. It is a situation where work is needed without stopping the facility. Please do not delay the supply May 6, 2025 at 11:19 AM, Sazzad Bhai SKon : We increase the priority for slitter empty trays. We're monitoring Currently there are 10 + orders for cathode slitter May 6, 2025 at 11:20 AM, Rácz Dániel / FA : Thank you Sir ! 🙏 May 6, 2025 at 11:21 AM, 김대호 (Kim Dae Ho) : Thank you, but it's not enough. The equipment will not stop today. May 6, 2025 at 11:26 AM, Szarka Adrián : Anod Press 2 re jön az agv ? Megtudnák nézni ? May 6, 2025 at 11:26 AM, Sazzad Bhai SKon : Checking order May 6, 2025 at 11:28 AM, Szabadi Miki : Igen Agv#10 megy majd oda várakozik 31es raktár előtt May 6, 2025 at 11:30 AM, Szarka Adrián : Köszönöm ❤️❤️❤️ May 6, 2025 at 11:31 AM, Szabadi Miki : Szivi😉 May 6, 2025 at 11:36 AM, Rácz Dániel / FA : Most érkezett meg May 6, 2025 at 11:37 AM, Erik Gerzsenyi : Igen May 6, 2025 at 11:38 AM, Rácz Dániel / FA : AN Slittek nem termelnek ? May 6, 2025 at 11:38 AM, Sazzad Bhai SKon : Anode slitter tray are normal. May 6, 2025 at 11:39 AM, 김대호 (Kim Dae Ho) : Anode sliter 4, 5 Is there any available material? May 6, 2025 at 11:40 AM, Rácz Dániel / FA : Yes, because the Slitt machines stopped. May 6, 2025 at 11:40 AM, 김대호 (Kim Dae Ho) : What do you mean by stopping? May 6, 2025 at 11:40 AM, Sazzad Bhai SKon : Yes, bobbins are coming on U/W ports for anode May 6, 2025 at 11:41 AM, Rácz Dániel / FA : Anode side May 6, 2025 at 11:41 AM, Rácz Dániel / FA : Anode Slitt 1, 2, 3. May 6, 2025 at 11:43 AM, Rácz Dániel / FA : No production May 6, 2025 at 11:55 AM, FACS_오창훈_CHANGHOON : E1STKA33 FORK#1 Center Error May 6, 2025 at 11:57 AM, 배병민 (Bae Byoungmin) : @FA Technician Please check May 6, 2025 at 11:59 AM, Rácz Dániel / FA : @Szücs Géza FT-B May 6, 2025 at 12:08 PM, Szücs Géza FT-B : i am the coater man! 🤣😂 this is my quest 😉👌 May 6, 2025 at 12:08 PM, Rácz Dániel / FA : Gyere kérlek az Anód 33 as roll raktárhoz. A villa a jumbo rollal beleütközik a raktár tároló részébe May 6, 2025 at 12:09 PM, Rácz Dániel / FA : Oké akkor megpróbálom más hova betárazni May 6, 2025 at 12:25 PM, Sazzad Bhai SKon : Cathode slitter empty trays are normal now. May 6, 2025 at 12:56 PM, Erik Gerzsenyi : Anod slitt 4-re 29 perce varunk az Agv-re May 6, 2025 at 1:01 PM, 배병민 (Bae Byoungmin) : AGV#17 is heading to the port. May 6, 2025 at 1:01 PM, Szarka Adrián : Anod Slitt 4-5 re jönnek az agv k ? Nézzetek meg kerlek köszi May 6, 2025 at 1:04 PM, 김대호 (Kim Dae Ho) : 음극 슬리팅 1, 2호기 버퍼 일부로 메뉴얼로 해놓았으니, 오토모드로 변경 하지 말아주세요 Anode slitting 1, 2 buffers are set manually, so please do not change to auto mode. May 6, 2025 at 1:07 PM, Viktoriia Hleba : 1 slitter cathode nincs AGV- 15 perc May 6, 2025 at 1:10 PM, Szarka Adrián : 4 re meg jött de az 5 mikor jön ? May 6, 2025 at 1:13 PM, Szarka Adrián : ??? May 6, 2025 at 1:13 PM, 배병민 (Bae Byoungmin) : AGV#11 is on the way. May 6, 2025 at 1:14 PM, Szarka Adrián : Thanks May 6, 2025 at 1:15 PM, 김대호 (Kim Dae Ho) : Pm님 11번 agv 조치된건가요? 오전에 프레스 7호기에서 신호가 안간다고 들었습니다! May 6, 2025 at 1:16 PM, 배병민 (Bae Byoungmin) : 네 이후 다른 포트에 정상적으로 투입되는건 확인되어 모니텅링하면서 지켜보고 있습니다 May 6, 2025 at 1:17 PM, 김대호 (Kim Dae Ho) : 넵 알겠습니다. 감사합니다. May 6, 2025 at 1:20 PM, Viktoriia Hleba : 30 perc - nincs AGV 1 slitter cathode May 6, 2025 at 1:23 PM, duzzaman Md (MCS) : Unfortunately,There's no Lot available May 6, 2025 at 1:38 PM, 김건희 : Slitter R@R시작 했습니다 May 6, 2025 at 1:45 PM, Rácz Dániel / FA : CA Slitt 3 nincs üres reel tálca May 6, 2025 at 1:46 PM, Rácz Dániel / FA : 😞 May 6, 2025 at 1:47 PM, Viktoriia Hleba : 2 slitter cathode nincs AGV - 22 perc May 6, 2025 at 1:48 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 May 6, 2025 at 1:49 PM, Rácz Dániel / FA : @mcs May 6, 2025 at 1:51 PM, Rácz Dániel / FA : CA Slitt 2, 3 nincs üres reel tálca May 6, 2025 at 1:51 PM, Rácz Dániel / FA : @duzzaman Md (MCS) thank you May 6, 2025 at 1:52 PM, Sazzad Bhai SKon : There is no lot available May 6, 2025 at 1:53 PM, Rácz Dániel / FA : Thank you Mr Sazzad May 6, 2025 at 1:56 PM, Rácz Dániel / FA : This message was deleted. May 6, 2025 at 2:02 PM, Rácz Dániel / FA : CA Slitt 2 nincs üres reel tálca @ May 6, 2025 at 2:03 PM, Szarka Adrián : Mikor lesz ? Meddig fogunk még ezzel szenvedni ? Valaki rajta van az ügyön ? May 6, 2025 at 2:06 PM, Szücs Géza FT-B : @Koncz Tamás @KIM SEYEON [김세연]_FA tudhatja a választ erre May 6, 2025 at 2:17 PM, Koncz Tamás : Sajnos nem tudok új infórmációval szolgálni May 6, 2025 at 2:18 PM, Rácz Dániel / FA : Anód 51-es raktárba alig mennek be a teli reel tálcák, fél szinten várakoznak. Katód oldalon pedig alig érkeznek üres reel tálcák. May 6, 2025 at 2:34 PM, Viktoriia Hleba : 2 slitter cathode nincs tálca May 6, 2025 at 2:37 PM, Rácz Dániel / FA : Anód 51-es raktárba nem mennek a teli reel tálcák. Anód 52-es raktárba átirányítva, hogy a conveyor ne telítődjön fel. May 6, 2025 at 3:04 PM, 김대호 (Kim Dae Ho) : Please send me the ball tray. Anode should never lack a ball tray. May 6, 2025 at 3:05 PM, Szarka Adrián : Anod slit 4 nincs tarca gyertek kerlek köszi May 6, 2025 at 3:05 PM, Szabadi Miki : Uton vannak May 6, 2025 at 3:06 PM, Szarka Adrián : Köszi köszi May 6, 2025 at 3:07 PM, 김대호 (Kim Dae Ho) : It should not be delayed. Please. May 6, 2025 at 3:23 PM, 김대호 (Kim Dae Ho) : 음극 슬리팅 공트레이 공급 지연으로 음극 슬리팅 4호기 간헐적으로 멈추고 있습니다. @배병민 (Bae Byoungmin) @방혁 PM(Bang.Hyuk) FA May 6, 2025 at 3:36 PM, 김건희 : @연해리 음극 슬리터 CV Reel 입고, Tray out 속도가 생산속도보다 느립니다 확인 부탁드립니다. May 6, 2025 at 3:37 PM, Viktor Vadas : Sziasztok! Coating Folia raktarhoz szeretnenk segitseget kerni, elobb lett valoszinuleg kinyitva az ajto mint kellett volna! Koszonjuk! May 6, 2025 at 3:38 PM, Szabadi Miki : Megyünk May 6, 2025 at 3:41 PM, Szabadi Miki : Kész May 6, 2025 at 3:43 PM, Viktor Vadas : Koszi! May 6, 2025 at 3:43 PM, Erik Gerzsenyi : Anod slitt 4 megallt a vonveyor May 6, 2025 at 3:43 PM, Erik Gerzsenyi : C May 6, 2025 at 3:43 PM, Erik Gerzsenyi : Nezzetek ra kerlek May 6, 2025 at 3:45 PM, Szabadi Miki : Mindjárt megyünk May 6, 2025 at 3:50 PM, Szabadi Miki : Üres tálca is lassan jön May 6, 2025 at 3:55 PM, duzzaman Md (MCS) : @FA Please check E0STKC35_P01 Alarm: IPS sensor reading fails May 6, 2025 at 3:56 PM, Szabadi Miki : Checking May 6, 2025 at 4:06 PM, KIM SEYEON [김세연]_FA : @김건희 피엠님 저희 프레스 슬리터 속도가 어떻게 되나요? ㄴ 슬리터 공트레이 입고 필요주기 : 한시간 몇개? ㄴ 슬리터 실트레이 출고 필요주기 : 상동 ㄴ 슬리터에 프레스드 롤 공급 필요주기 : 한시간 몇개? ㄴ 프레스에 코티드 롤 공급 필요주기 : 한시간 몇개? ㄴ 프레스에 프레스드 롤 회수 필요주기 : 한시간 몇개? May 6, 2025 at 4:07 PM, Böröcz Tamás : Katód slitt 1 Transfer megállt help help pls May 6, 2025 at 4:08 PM, 김건희 : @김건희 피엠님 저희 프레스 슬리터 속도가 어떻게 되나요? ㄴ 슬리터 공트레이 입고 필요주기 : 호기별 약 10Ea ㄴ 슬리터 실트레이 출고 필요주기 : 상동 ㄴ 슬리터에 프레스드 롤 공급 필요주기 : 시간당 2Roll 속도 필요 ㄴ 프레스에 코티드 롤 공급 필요주기 : 상동 ㄴ 프레스에 프레스드 롤 회수 필요주기 : 상동 입니다. May 6, 2025 at 4:09 PM, Szabadi Miki : Uton vagyunk May 6, 2025 at 4:10 PM, 김건희 : @배병민 (Bae Byoungmin) 음극 Press R@R 완료 하였습니다. 도와주셔서 감사합니다. May 6, 2025 at 4:10 PM, Szarka Adrián : Katod Slitt 1 nem Bem vitte el a robot az egyik reelt legyszi nézzetek meg köszi May 6, 2025 at 4:14 PM, 방혁 PM(Bang.Hyuk) FA : 안녕하세요 작업우선도 변경하여 이슈 해소중입니다. 곧 해소될겁니다. May 6, 2025 at 4:16 PM, Szabadi Miki : Itt vagyunk May 6, 2025 at 4:22 PM, 배병민 (Bae Byoungmin) : 고생많으셨습니다 May 6, 2025 at 4:48 PM, Rácz Dániel / FA : LTC0413 as reel tálcát elküldtem a raktárba. A következő tálcára szépen áttette a reelt. Solved 😎 May 6, 2025 at 4:51 PM, Viktoriia Hleba : 1 slitter cathode tálca stop May 6, 2025 at 4:52 PM, Rácz Dániel / FA : Jövök May 6, 2025 at 5:00 PM, Nagy Dávid 4 : Anod slit 4 nincs AGV 15 perc help help köszönöm szépen May 6, 2025 at 5:01 PM, Rácz Dániel / FA : A31es raktárból már úton van a #22-es AGV May 6, 2025 at 5:03 PM, 배병민 (Bae Byoungmin) : AGV#22 is going hard. May 6, 2025 at 5:08 PM, Rácz Dániel / FA : Most ért oda. May 6, 2025 at 5:09 PM, 김대호 (Kim Dae Ho) : Pm님 공트레이 지연이 재발생 되었습니다. 현재 음극 슬리팅측 컨베이어에 트레이가 하나도없습니다. May 6, 2025 at 5:12 PM, 김대호 (Kim Dae Ho) : 음극 공트레이 공급부터 부탁드립니다. 아직 라인 인증중입니다. 설비 멈추었습니다. @김건희 @방혁 PM(Bang.Hyuk) FA @배병민 (Bae Byoungmin) May 6, 2025 at 5:15 PM, Rácz Dániel / FA : Anód Slitt 4-5 azért nincs üres reel tálca, mert az 52-es raktár hibában volt. May 6, 2025 at 5:16 PM, 배병민 (Bae Byoungmin) : 유선상 요청주신 내용으로 우선순위 먼저 몇개 진해하셔도 되겠습니다 May 6, 2025 at 5:19 PM, Szarka Adrián : Anod slitt4 nincs tálca May 6, 2025 at 5:19 PM, Szarka Adrián : Nézzetek meg kerlek May 6, 2025 at 5:20 PM, Rácz Dániel / FA : @Sazzad Bhai SKon Why not coming empty reel tray ? A51-52 May 6, 2025 at 5:20 PM, Rácz Dániel / FA : Anód Slitt 4-5 azért nincs üres reel tálca, mert az 52-es raktár hibában volt. May 6, 2025 at 5:20 PM, Rácz Dániel / FA : Anód Slitt 4-5 azért nincs üres reel tálca, mert az 52-es raktár hibában volt. May 6, 2025 at 5:20 PM, Rácz Dániel / FA : 😞 May 6, 2025 at 5:20 PM, Szarka Adrián : Szuper …. 😢😢😢 May 6, 2025 at 5:21 PM, Rácz Dániel / FA : Még az anód Slitt 5-ön sincs 😞 May 6, 2025 at 5:21 PM, Rácz Dániel / FA : @duzzaman Md (MCS) please May 6, 2025 at 5:23 PM, duzzaman Md (MCS) : There are plenty of jobs. However, its pretty slow. You should receive some soon. May 6, 2025 at 5:23 PM, 김대호 (Kim Dae Ho) : 감사합니다. May 6, 2025 at 5:24 PM, Erik Gerzsenyi : This message was deleted. May 6, 2025 at 5:24 PM, Rácz Dániel / FA : Anód Slitt 4-5 nincs üres reel tálca help help @mcs May 6, 2025 at 5:24 PM, Erik Gerzsenyi : Semmi May 6, 2025 at 5:25 PM, Erik Gerzsenyi : Mán látom May 6, 2025 at 5:25 PM, Erik Gerzsenyi : 🥲 May 6, 2025 at 5:25 PM, Rácz Dániel / FA : Thank you Sir ! 🙏 May 6, 2025 at 5:25 PM, Szappanos Gábor : Hali. Anód rollraktárbab torlódás van, gyertek légyszíves. Köszi May 6, 2025 at 5:32 PM, Rácz Dániel / FA : Itt vagyok, intézem. 🫡 May 6, 2025 at 5:33 PM, 김대호 (Kim Dae Ho) : 지금부터는 지연되면 위험할수있어서 반송 늦을시 우선순위 조정하도록하겠습니다. May 6, 2025 at 5:34 PM, 배병민 (Bae Byoungmin) : 넵 May 6, 2025 at 5:34 PM, Rácz Dániel / FA : Már lassan érkeznek 🤗 May 6, 2025 at 5:39 PM, Rácz Dániel / FA : Goodbye everyone. Have a good rest ! Solved 😎 May 6, 2025 at 5:40 PM, 김태현 : @Fa Can I use anode 4 AGV? May 6, 2025 at 5:41 PM, 김태현 : Number 1r/w is working now. May 6, 2025 at 5:46 PM, Rácz Dániel / FA : @Sazzad Bhai SKon @duzzaman Md (MCS) Thank you for helping ! 🙏 May 6, 2025 at 5:47 PM, duzzaman Md (MCS) : Thank you too. Have a wonderful evening. May 6, 2025 at 5:48 PM, FACS_Wooseok Choi : F1sla050-tr05-mcp#2 technician help May 6, 2025 at 5:51 PM, 김태현 : @FA coated anode 4 AGV is not coming. May 6, 2025 at 5:52 PM, Mr.Miti (미티) FA : Checking May 6, 2025 at 5:52 PM, 김대호 (Kim Dae Ho) : 이시간부터 설비 멈추어있습니다. 공트레이 지연과 현재는 이재기 에러입니다. @김건희 May 6, 2025 at 5:54 PM, 류종석(RyuJongSeok) : 코팅 음극 4라인 1st Rewinder 조치 부탁 드리겠습니다 May 6, 2025 at 5:54 PM, KIM SEYEON [김세연]_FA : @배병민 (Bae Byoungmin) 피엠님 혹시 에러코드가 뭔가요? May 6, 2025 at 5:55 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B any technician at coater area? May 6, 2025 at 5:55 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check coater 4 line error first May 6, 2025 at 5:58 PM, Mr.Miti (미티) FA : I say checking! May 6, 2025 at 5:58 PM, Mr.Miti (미티) FA : Im here May 6, 2025 at 5:58 PM, KIM SEYEON [김세연]_FA : okay May 6, 2025 at 6:00 PM, Mr.Miti (미티) FA : The TR control panel was switched on. May 6, 2025 at 6:00 PM, Mr.Miti (미티) FA : To Maint. May 6, 2025 at 6:04 PM, 박정근(Park) : 음극4라인 곧 라인정지해야합니다.. 빠른대응 부탁드립니다 May 6, 2025 at 6:08 PM, Oleksii Krasnoshchok : Hello anode press 1 problem with Agv r/w May 6, 2025 at 6:19 PM, Szeitz Flórián : Sziasztok! Anód press 8ra nem érkezik az anyag. Ennek az oka az lehet hogy a 3 As roll raktárba megállt a daru ?! Légyszives nézzétek meg. Köszönöm May 6, 2025 at 6:20 PM, Mohammad Amir : Hello, Checking May 6, 2025 at 6:21 PM, Szeitz Flórián : Anód slitt 4re se jön Z anyag May 6, 2025 at 6:23 PM, Mr.Miti (미티) FA : Oksa May 6, 2025 at 6:23 PM, Mr.Miti (미티) FA : Nézzük May 6, 2025 at 6:23 PM, Mr.Miti (미티) FA : Anode oldalon volt egy kis gubanc a raktárba May 6, 2025 at 6:24 PM, Mohammad Amir : @FA Please check RBA1232 located at E0STKA32_P01 ,it has job to go to STKA33 this carrier is not moving cause STKA33_P01/BP01 is OOS ,and because of this issue job for Carrier RBA1062 for press Anode -8 is pending. Thank you very much! May 6, 2025 at 6:57 PM, (Unknown) : Sziasztok.Katód roll raktárba a 13-as AGV pozíciót vesztett.megnéznétek?Köszönöm May 6, 2025 at 7:16 PM, gutenkunstabelzoltan : anode roll #1 stocker has to rolls RBA1248, RBA1236 and it wants to it in the wrong order so it can’t do it and i can change the order May 6, 2025 at 7:26 PM, gutenkunstabelzoltan : Kesz May 6, 2025 at 7:39 PM, cehmannzsoltcehmann : @Mohammad Amir E0STKA31-TR-MCP 3017 marerial carrier id is unk change it RBA1232 pls May 6, 2025 at 7:40 PM, Mohammad Amir : Checking May 6, 2025 at 7:42 PM, Mohammad Amir : Please confirm are you referring to STKA32_3017? As I did not find any Unknown in STKA31. Thank you very much! May 6, 2025 at 7:43 PM, cehmannzsoltcehmann : Yes May 6, 2025 at 7:46 PM, Mohammad Amir : Issue has been resolved ✅. Feel free to contact me again if you need any assistance. Thank you very much! May 6, 2025 at 7:47 PM, cehmannzsoltcehmann : the problem still exists, but I trust you ✅ May 6, 2025 at 7:50 PM, Mohammad Amir : This message was deleted. May 6, 2025 at 7:51 PM, Mohammad Amir : From MCS side all the relavent information is up-to-date. ✅ Please check from SCS side as it says Dest port 3017_STKA32 key S/W off error. And it is still UNK in SCS , please check SCS side. I am monitoring. Thank you very much! May 6, 2025 at 7:52 PM, Mohammad Amir : First please check 3017 port there is now Input H/S off error and now it is blocking transfer. Thank you very much! May 6, 2025 at 8:19 PM, Szeitz Flórián : Sziasztok! Katód oldalon lassan érkeznek a tálcàk. Slitt 2 re most nincs is. May 6, 2025 at 8:30 PM, Mr.Miti (미티) FA : Megnéztem. A daruk dolgoznak, megvan nekik a parancs de sajnos ennél gyorsabban jelen állapotukban nem tudnak dolgozni. 🥲 May 6, 2025 at 8:53 PM, adambenczik : @Mohammad Amir is there no material in Cathode warehouse? E1SLC020&010 waiting for material May 6, 2025 at 8:54 PM, Mohammad Amir : Checking May 6, 2025 at 8:55 PM, Mohammad Amir : Yes unfortunately there is materials available as soon as materials will be available jobs will be created as there are active LR from both process machine. Thank you very much! May 6, 2025 at 8:57 PM, adambenczik : Okey, thank you May 6, 2025 at 8:57 PM, Mohammad Amir : You are welcome! May 6, 2025 at 8:57 PM, 김대호 (Kim Dae Ho) : If there is an node sliter 4, 5 u/w L/R command Please cancel it. @Mohammad Amir May 6, 2025 at 8:57 PM, Mohammad Amir : Checking May 6, 2025 at 8:58 PM, Mohammad Amir : There are no command exists ✅. Thank you very much! May 6, 2025 at 8:59 PM, 김대호 (Kim Dae Ho) : Thank you 👍 May 6, 2025 at 9:02 PM, Mohammad Amir : This message was deleted. May 6, 2025 at 9:02 PM, Mohammad Amir : You are welcome! May 6, 2025 at 9:04 PM, 김대호 (Kim Dae Ho) : Anode sliter 5 Help The robot stopped again. May 6, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : 제가 갑니다 May 6, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please come May 6, 2025 at 9:10 PM, adambenczik : Miti is at Formation, there is a crane problem May 6, 2025 at 9:13 PM, adambenczik : I also have a problem at cathode press 3 RW transfer May 6, 2025 at 9:40 PM, adambenczik : E1PRC030 and E1PRA080 ODSL problem, please check May 6, 2025 at 9:42 PM, Baek Hojong(백호종)FA : I,m going May 6, 2025 at 9:43 PM, Mr.Miti (미티) FA : Me to from formation May 6, 2025 at 9:48 PM, Szeitz Flórián : Sziasztok,! Anód press 8 RW nèl az AGV nem visszi el S Roll-t. Fent van az az adó katon a Roll. May 6, 2025 at 9:49 PM, Mr.Miti (미티) FA : Optikai távolság mérő szenzort nézzetek meg May 6, 2025 at 9:50 PM, Mr.Miti (미티) FA : És tartozékait🫣 May 6, 2025 at 10:01 PM, Mr.Miti (미티) FA : Kész May 6, 2025 at 10:07 PM, Mr.Miti (미티) FA : Solved! May 6, 2025 at 10:23 PM, Vlad Danilevskyi : Hello. Anode press 4 Agv uw error. Thanks May 6, 2025 at 10:40 PM, cehmannzsoltcehmann : @Mohammad Amir pls check E1PRC020 not coming material with agv May 6, 2025 at 10:41 PM, Mohammad Amir : Checking May 6, 2025 at 10:43 PM, Mohammad Amir : Please check E0STKC35_C01 it is inactive without error that's why created job for pressing -2 Cathode not moving. Thank you very much! May 6, 2025 at 10:45 PM, Mr.Miti (미티) FA : Checking May 6, 2025 at 10:45 PM, Mohammad Amir : Issue has been resolved ✅. Crane just picked up the materials. Thank you very much! May 6, 2025 at 10:45 PM, Mr.Miti (미티) FA : Good May 6, 2025 at 10:46 PM, cehmannzsoltcehmann : Ok good ty May 6, 2025 at 10:47 PM, Mohammad Amir : AGV#07 on the way with materials. ✅ Thank you very much! May 6, 2025 at 10:47 PM, Mohammad Amir : You are welcome! May 6, 2025 at 10:48 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 7, 2025 at 12:17 AM May 7, 2025 at 12:17 AM, (Unknown) : Anód slitt torlódnak a tálcák a converoyon.megnéznétek?köszi May 7, 2025 at 12:17 AM, Mr.Miti (미티) FA : A teli lassan megy be raktárba. Előbb néztem May 7, 2025 at 12:17 AM, Mr.Miti (미티) FA : Köszönöm May 7, 2025 at 12:18 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check LTA1188 located at E0CNVA51_06_034 it is not moving and causing jam Thank you! May 7, 2025 at 12:19 AM, Mr.Miti (미티) FA : I know! Thank you very much! We are on it! May 7, 2025 at 12:19 AM, Mohammad Amir : You are welcome! Always glad to help you. May 7, 2025 at 12:36 AM, (Unknown) : Anód Press 8 előtt a 17-es AGV ki állt hibára.megnéznétek?köszönöm May 7, 2025 at 2:22 AM, Kurgya Attila : Csak szólni szeretnék hogy anod roll raktárban nagy a káosz. May 7, 2025 at 2:22 AM, Kurgya Attila : Agv tekintetbe gondoltam May 7, 2025 at 2:22 AM, Mr.Miti (미티) FA : Köszönjük szépen! Mindjart intézzük May 7, 2025 at 2:30 AM, Vászon Márton : Katód raktárban áll minden, nekünk meg nem hozza a tekercset nézzetek rá légyszi May 7, 2025 at 2:38 AM, Vászon Márton : Kettes stacker piros ott áll a roll a levegőben May 7, 2025 at 2:51 AM, adambenczik : Rajta vagyok May 7, 2025 at 2:57 AM, Powder tréner : Sziasztok szeretnék kérni segítséget powder anod raktáron elakadt egy palleta a convreyoron. May 7, 2025 at 3:40 AM, Szeitz Flórián : Sziasztok! Anód slitt 1 megállt a leszedő robot A oldali R/W-nèl. Légyszives nézzétek meg. Köszönöm May 7, 2025 at 3:42 AM, Mr.Miti (미티) FA : Nézzük May 7, 2025 at 3:46 AM, cehmannzsoltcehmann : Kész May 7, 2025 at 4:20 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51_06_012/13 there is INV-01 RunTime over error and it is blocking full materials recovery. Thank you very much! May 7, 2025 at 4:23 AM, Szeitz Flórián : Sziasztok! Anód slitt Conveyor pályán torlódnak a reelek . May 7, 2025 at 4:25 AM, Szeitz Flórián : Katód Slitt 2 mögött keresztbe fordult egy reel tálca a Conveyoron. Légyszives gyertek javítani köszönöm May 7, 2025 at 4:27 AM, Baek Hojong(백호종)FA : Solved May 7, 2025 at 4:34 AM, cehmannzsoltcehmann : Kész May 7, 2025 at 4:38 AM, Szeitz Flórián : Anód press 4re nem érkezik az AGV . Megnéznètek az okát. May 7, 2025 at 4:40 AM, Mohammad Amir : Checking May 7, 2025 at 4:42 AM, Mohammad Amir : There was an issue with last command. Could you please press LR again. Thank you very much! May 7, 2025 at 4:46 AM, Szeitz Flórián : I pressed it, but it should automatically bring it to the Buffer storage... May 7, 2025 at 4:50 AM, Mohammad Amir : We did not receive new LR last one was at 3:21. Last job was cancelled by the operator. Please try again. Thank you very much! May 7, 2025 at 5:06 AM, Karina Lyzanets : This message was deleted. May 7, 2025 at 5:07 AM, Szeitz Flórián : Mèg most se érkezett roll . Mi az oka ? May 7, 2025 at 5:09 AM, Mohammad Amir : The reason is that we did not receive any Load request for new Roll. Last one was at 3:21 and the roll RBA0578 was assigned however this job was cancelled by the operator that's why it didn't come. So Please press Load request again and you will start receiving the Roll. Thank you very much! May 7, 2025 at 5:23 AM, Szeitz Flórián : De a Buffer tarolóba miért nem teszi automatikusan?( Buffer tároló használtba van , nincs kikapcsolva ) May 7, 2025 at 5:24 AM, Mohammad Amir : LR received successfully at 5:22 and Roll RBA0567 is on the way to Anode Press -4. Thank you very much! May 7, 2025 at 5:30 AM, Mohammad Amir : For pressing 4 Anode :- Path is :- E0STKAXX ->E0FGV001->E1PRA040. So as we receive LR materials go from warehouse to AGV to Process Machine,this is the normal path for process. Could you please tell me the id of buffer you are referring,I will check. Thank you very much! May 7, 2025 at 5:35 AM, Mohammad Amir : AGV#23 now on the way ✅. Thank you! May 7, 2025 at 5:42 AM, Szeitz Flórián : Most a press 4 előtt kiállt hibára . May 7, 2025 at 6:01 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 7, 2025 at 6:34 AM, Hári Zoltàn : Jó reggelt! Anód 1 coater-en szeretnénk igénybe venni az AGV-ket, ha van rá lehetőség! Jelenleg ki vannak kapcsolva. Köszönöm! May 7, 2025 at 6:44 AM, Szabadi Miki : @Dániel Hufnágel @Koncz Tamás ? May 7, 2025 at 6:45 AM, Mr.Miti (미티) FA : Este Bae kérésére nem használtunk May 7, 2025 at 6:47 AM, Szabadi Miki : Akkor sajnos egyenlőre lekapcsolva marad további információig (boohoo) May 7, 2025 at 6:51 AM, Hári Zoltàn : Köszi az infót! May 7, 2025 at 6:53 AM, Mr.Miti (미티) FA : Nincs mit! May 7, 2025 at 6:59 AM, Hári Zoltàn : És vajon a katód 1 coater-en tudjuk majd használni ha elindul? May 7, 2025 at 7:01 AM, Mr.Miti (미티) FA : Jó a kérdés May 7, 2025 at 7:01 AM, Dániel Hufnágel : Jó reggelt, May 7, 2025 at 7:01 AM, Oláh András : Katod oldalon felkapcsolt állapotvan várnak az AGVk úgyhogy ott biztosan 👍 May 7, 2025 at 7:02 AM, Dániel Hufnágel : Próbalok utanna lesni történt e az elmúlt két napban bármi változás, amennyiben nincs mehet automatán! May 7, 2025 at 7:02 AM, Hári Zoltàn : Oké, köszi! May 7, 2025 at 7:04 AM, Koncz Tamás : AGVs 2, 4, 11, 17, and 22 are problem-free. May 7, 2025 at 7:04 AM, Dániel Hufnágel : Katód oldal menjen automatán, anód egyenlőre marad kézi megoldással May 7, 2025 at 8:01 AM, FACS_JaewonShin : ■ 7th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi Daily(12:00 - 18:00) : 2 people - PLC Control 2 Jin taehyeong Jin jaejeong May 7, 2025 at 9:25 AM, 이게리 : From today : Anode 1 Cathode 1 0-24 AGV Production is mandatory From Tomorrow We need to produce with 3 line. For 3 line production We dont have enough lifter and manpower If the AGV is not working. If the AGV is stopped by FA Team continous Downtime will be reported for the FA Team. @장영환(Younghwan Chang) May 7, 2025 at 9:27 AM, 장영환(Younghwan Chang) : Ok Will shift leader check downtime? May 7, 2025 at 9:31 AM, 이게리 : Yes! May 7, 2025 at 9:36 AM, Farkas Dániel Elekt : Sziasztok Katod porra gyertek legyszives May 7, 2025 at 9:36 AM, Farkas Dániel Elekt : Nem jon az anyag May 7, 2025 at 9:38 AM, Szabadi Miki : Melyik sorra ? May 7, 2025 at 9:41 AM, Farkas Dániel Elekt : 6 May 7, 2025 at 9:41 AM, Szabadi Miki : Okés látom 2 és 6 sorra van kérés May 7, 2025 at 10:00 AM, Szabadi Miki : @Csicskovics Balázs SMC Munkakérés Helyszín : ROLL/FÓLIA Munka leírása : a manuál portokra hosszabbító guide felszerelése Időtartam : gépenként 3 óra Egyéb infó : 5db gépre tervezett a felszerelése. A munkálat alatt le lesz állítva a crane. Nem biztos de lehet okoz majd egy kis anyag ellátási problémát. May 7, 2025 at 10:04 AM, FACS_JaewonShin : 양극 코터4라인 agv 운용 하기에 자재들이 너무많아 현재 운용이 어렵습니다. 자재들 전부 위치 이동 부탁드립니다. AGV operation is too hard in Cathode line 4 Because mass of materials are blocking agv route Please move all of materials in the cathode line4 May 7, 2025 at 10:21 AM, 장정훈 : @Fa Come to Cathodepress 2!! May 7, 2025 at 10:30 AM, Yena Valerii : Hello. please come to anode press 2 May 7, 2025 at 10:48 AM, Yena Valerii : please come to the anode roll warehouse May 7, 2025 at 10:49 AM, Csicskovics Balázs : Cathode press 3 mögött elvesztette az irányt a 21 AGV. Gyertek légyszíves Köszönöm May 7, 2025 at 10:57 AM, FACS_JaewonShin : 양극 코터 4라인 리와인더 터렛 회전 지원 해주실수 있나요? 자재 dia 작아 인터락 걸리는거 같습니다. May 7, 2025 at 11:00 AM, Turianytsia Olesia : A szállítószalag nem működik. Cathode slitt 4 May 7, 2025 at 11:02 AM, Sazzad Bhai SKon : Make LR please May 7, 2025 at 11:10 AM, Szabadi Miki : Now it is working normal May 7, 2025 at 2:06 PM, 김주연 : @FA E0STKA52 크레인 무언정지인 것으로 보입니다- 조치부탁드립니다 May 7, 2025 at 2:39 PM, Turianytsia Olesia : Nincsenek AGV-k Slitt anode 1 May 7, 2025 at 2:40 PM, Lee Junghan(이정한)_CS : @Sazzad Bhai SKon Plz check E1SLC050 LR from Roll warehouse May 7, 2025 at 2:40 PM, Oláh András : RTD szerint nincs hozzá anyag. May 7, 2025 at 2:41 PM, Sazzad Bhai SKon : This message was deleted. May 7, 2025 at 2:43 PM, Sazzad Bhai SKon : Slitter 5 anode, job on the way May 7, 2025 at 2:44 PM, Csicskovics Balázs : Anode slitt 5 no production! May 7, 2025 at 2:44 PM, Sazzad Bhai SKon : *slitter 1 May 7, 2025 at 2:44 PM, Oláh András : Roll arrived May 7, 2025 at 2:46 PM, Lee Junghan(이정한)_CS : @Sazzad Bhai SKon plz check slitter ca #5 LR May 7, 2025 at 2:46 PM, Sazzad Bhai SKon : Lr received but no search lot May 7, 2025 at 2:54 PM, FACS_JaewonShin : @MCS e0stkc35 input H/S off error Could you check? May 7, 2025 at 2:55 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check this. May 7, 2025 at 3:20 PM, Csicskovics Balázs : Cathode press 7 re nem hoz az AGV anyagot. Nézzétek meg légyszíves Köszönöm May 7, 2025 at 3:21 PM, Oláh András : 32-es raktárban IPS szenzor hiba van és onnan jönne ki az anyag May 7, 2025 at 3:21 PM, Oláh András : Katod oldalon a slitt mögötti szalag összes HMI-je lefagyott úgyhogy az megállt May 7, 2025 at 3:42 PM, Kim Dongju(김동주)_FA : @김대호 (Kim Dae Ho) 전극 슬리터 4호기로 와주세요. Conveyor 관련 말씀 드릴께 있습니다. May 7, 2025 at 3:42 PM, 김대호 (Kim Dae Ho) : 네 알겠습니다. May 7, 2025 at 3:46 PM, Szabadi Miki : @Shahbaz 샤바즈 MCS/RTD Please could you send empty trays for the cathode slitt from STKC51? Only the other crane brings it and there are quite a few of them May 7, 2025 at 3:49 PM, 김주연 : 공트레이는 52호기에 우선 적재돠고, 출고되게끔 되어있습니다. 수동으로 명령 내리는건 지양하고있습니다 May 7, 2025 at 3:51 PM, Shahbaz 샤바즈 MCS/RTD : There are already automatically created jobs, they are in queue because of lot of jobs for the stocker cranes. May 7, 2025 at 3:55 PM, 김주연 : 기존 잡 우선순위 조정하여 반송하고 있습니다. I changed the priority. It will arrive soon May 7, 2025 at 3:56 PM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you. May 7, 2025 at 3:58 PM, 동현 : @Fa Plz check the E0STKC52 Crane 1 May 7, 2025 at 3:58 PM, Szabadi Miki : But warehouse 51 only has 1 order, couldn't it be sent from there too? Because without a tray, the slitt stops May 7, 2025 at 3:59 PM, 김대호 (Kim Dae Ho) : Pm님 시프트리더에게 해당 구역에 라인테이프 표기 및 자재들 놓지않도록 요청하였습니다. 저희도 모니터링 하도록 하겠습니다. May 7, 2025 at 4:00 PM, Kim Dongju(김동주)_FA : 네 감사합니다..^^ May 7, 2025 at 4:38 PM, Turianytsia Olesia : AGV meghibásodás cathode slitt 5 May 7, 2025 at 6:23 PM, 이민재 : Day shift FA Schedule Date: 2025.05.07 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 7, 2025 at 6:40 PM, Oláh Rajmund : Sziasztok, meg tudnátok nézni hogy cathode press 8 as gépre miért nem hoz anyagot az AGV? Koszonom May 7, 2025 at 6:41 PM, Simon Attila F. A. : Rajta vagyunk May 7, 2025 at 6:42 PM, Simon Attila F. A. : Raktár port hiba miatt nem megy pillanatnyilag. Próbáljuk áthidalni. May 7, 2025 at 6:42 PM, Kurgya Attila : Sziasztok Mai terv Anod 4 ide szeretnénk agv-ket Anod 1 egyenlőre itt nem kell Katod 1 ide is szeretnénk agv-ket Van ennek akadálya May 7, 2025 at 6:44 PM, Marsi Gábor : Meg kell próbálni oszt majd kiderül May 7, 2025 at 6:46 PM, Skwarek Tibor : IPS szenzor nem ad jelet így nem indul el a transfer. Próbáljuk megoldani. May 7, 2025 at 6:47 PM, Simon Attila F. A. : Rendben. May 7, 2025 at 6:47 PM, Oláh Rajmund : Koszonom May 7, 2025 at 6:48 PM, Skwarek Tibor : Most rakja rá, nemsokára érkezik May 7, 2025 at 7:00 PM, 최재균 : @FA 오늘 한국분 대응해주실수 있는분 계신가요 ? 음극 4 라인 와주실수 있나요 ? May 7, 2025 at 7:01 PM, 서지원 : 음극 코팅 4라인입니다 May 7, 2025 at 7:01 PM, Baek Hojong(백호종)FA : 지금가겠습니다 May 7, 2025 at 9:03 PM, Koska Szilárd János : Sziasztok segítséget kérnék Anód roll raktár hoz May 7, 2025 at 9:03 PM, Simon Attila F. A. : Itt vagyok. May 7, 2025 at 10:27 PM, Yanina : Sziasztok,ki tudnátok jönni Cathode slitt 5 re tálca probléma May 7, 2025 at 10:27 PM, Skwarek Tibor : Megyünk May 7, 2025 at 10:32 PM, Oláh Rajmund : Gyertek legyszives cathode slitt 3 ra meg állt az U/W robot May 7, 2025 at 10:34 PM, Simon Attila F. A. : Megyünk. May 7, 2025 at 10:35 PM, Skwarek Tibor : Kész May 7, 2025 at 10:38 PM, Skwarek Tibor : Kész May 7, 2025 at 11:56 PM, FACS_Wooseok Choi invited FACS_Bareum kim. May 8, 2025 at 1:07 AM May 8, 2025 at 1:07 AM, Yanina : Sziasztok Cathode slitt 2 probléma transzfer R/W May 8, 2025 at 1:07 AM, Skwarek Tibor : Megyünk May 8, 2025 at 1:08 AM, Yanina : Köszönöm szépen May 8, 2025 at 1:20 AM, Skwarek Tibor : Szívesen May 8, 2025 at 3:19 AM, Oláh Rajmund : Gyertek légyszives cathode press 8 ra az R/W nél útban van egy AGV May 8, 2025 at 3:19 AM, Oláh Rajmund : 21 es számú May 8, 2025 at 3:19 AM, Viczai Tamás : Megyünk May 8, 2025 at 6:13 AM, Hári Zoltàn : Technikust kernek az anod 1 re 2es rw-re! Koszi! All az agv ami oda menne! Koszi! May 8, 2025 at 6:54 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András, Kiss Balázs Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsokt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 8, 2025 at 7:08 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD Good morning! Can you check why we do not have material for chatode slitt#3? May 8, 2025 at 7:16 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! There is no lot available that satisfies the RTD filtering rule for CA Slitter #03. May 8, 2025 at 7:22 AM, Turianytsia Olesia : Nincsenek AGV-k anode slitt 2 20 perc May 8, 2025 at 7:24 AM, Shahbaz 샤바즈 MCS/RTD : Job just created and now materials is on the way. May 8, 2025 at 7:32 AM, Somoskövy Martin : Sziasztok. Cathode oldalon leállt a conveyor és már torlódnak a reelek. Megnéznétek? Köszönöm. May 8, 2025 at 7:45 AM, Dániel Hufnágel : Megyünk May 8, 2025 at 8:23 AM, Turianytsia Olesia : Nincsenek AGV-k anode slitt 2 20 perc May 8, 2025 at 8:25 AM, Shahbaz 샤바즈 MCS/RTD : There is no material available at the moment. May 8, 2025 at 8:45 AM, Dániel Hufnágel invited Zaman/Ivancsa FA. May 8, 2025 at 8:46 AM, Zaman/Ivancsa FA invited Hamza/Ivancsa FA, Hakim/Ivancsa FA, "Shuvo/Ivancsa FA" and Fahim/ivancsa. May 8, 2025 at 8:52 AM, 김대호 (Kim Dae Ho) : Cathode slitet 5 Please check the location of the tray. May 8, 2025 at 9:02 AM, 김대호 (Kim Dae Ho) : Is there anyone? May 8, 2025 at 9:04 AM, Sazzad Bhai SKon : From E1SLC050, there is no LR May 8, 2025 at 9:06 AM, 김대호 (Kim Dae Ho) : The empty tray didn't enter the facility. Please send me the number of people. Why isn't there anyone? May 8, 2025 at 9:07 AM, Oláh András : Comin May 8, 2025 at 9:47 AM, 장정훈 : @FA The cathodic slitter 5 conveyor tray has been distorted and an alarm has been issued!! May 8, 2025 at 9:51 AM, FACS_오창훈_CHANGHOON : GF coater An agv #33 charging err location charger #1 May 8, 2025 at 9:55 AM, FACS_오창훈_CHANGHOON : Agv #03 May 8, 2025 at 10:36 AM, Turianytsia Olesia : Nincsenek tálcák Cathode slitt 2 May 8, 2025 at 10:36 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD please check aviable material May 8, 2025 at 10:38 AM, Shahbaz 샤바즈 MCS/RTD : No material available for CA stiller # 02 May 8, 2025 at 10:38 AM, Dániel Hufnágel : Lassan érkeznek May 8, 2025 at 10:40 AM, Shahbaz 샤바즈 MCS/RTD : But last transfer was completed at 10:28 and there is no new LR. May 8, 2025 at 10:41 AM, Dániel Hufnágel : My bad we need empty carrier, but as i see storages are too buzy May 8, 2025 at 10:43 AM, Shahbaz 샤바즈 MCS/RTD : There are orders but the transfer is slow because of lot of tasks for stocker. May 8, 2025 at 10:44 AM, Majláth Martin : Sziasztok! Anod press 1 re szeretnék segítséget kérni. Köszi! May 8, 2025 at 12:18 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 5호기 컨베이어 확인 요청드립니다. 공트레이가 안들어옵니다. Please check the conveyor of Cathode slitting unit 5. The tray is not coming in. May 8, 2025 at 12:20 PM, 김대호 (Kim Dae Ho) : It's the same as what I asked for in the morning. Please do something about it. !!!!!!!!!! May 8, 2025 at 12:22 PM, 김주연 : This message was deleted. May 8, 2025 at 12:37 PM, 김대호 (Kim Dae Ho) : Cathode sliter 4, 5 Is there an AGV on its way? @Shahbaz 샤바즈 MCS/RTD May 8, 2025 at 12:40 PM, Shahbaz 샤바즈 MCS/RTD : There is job for slitter 4 and AGV#07 is assigned for it May 8, 2025 at 12:41 PM, Dániel Hufnágel : It little bit late, we have problem at the storage May 8, 2025 at 12:41 PM, Shahbaz 샤바즈 MCS/RTD : No lot search for slitter 5 May 8, 2025 at 12:44 PM, Sazzad Bhai SKon : AGV #7 error: IPS sensor readings fails. There is a job for 4 line cathode : RBC1464 May 8, 2025 at 12:45 PM, Dániel Hufnágel : Already on the way May 8, 2025 at 1:26 PM, 김대호 (Kim Dae Ho) : Cathode press 8 Is there an L/R signal? May 8, 2025 at 1:27 PM, Dániel Hufnágel : @Sazzad Bhai SKon @Shahbaz 샤바즈 MCS/RTD May 8, 2025 at 1:27 PM, Dániel Hufnágel : Please check May 8, 2025 at 1:27 PM, Oláh András : In the ACS we see the LR May 8, 2025 at 1:27 PM, Shahbaz 샤바즈 MCS/RTD : Yes there is LR May 8, 2025 at 1:27 PM, Shahbaz 샤바즈 MCS/RTD : But no lot search May 8, 2025 at 1:27 PM, 김대호 (Kim Dae Ho) : But why is the warehouse stopped? May 8, 2025 at 1:28 PM, 김대호 (Kim Dae Ho) : You're saying there's no Roll, right? May 8, 2025 at 1:28 PM, Shahbaz 샤바즈 MCS/RTD : Yes. May 8, 2025 at 1:29 PM, Turianytsia Olesia : A szállítószalag elakadt Cathode slitt 5 May 8, 2025 at 1:29 PM, Sazzad Bhai SKon : Three rolls available but shelf is out of service May 8, 2025 at 1:31 PM, 김대호 (Kim Dae Ho) : Why that? May 8, 2025 at 1:33 PM, Sazzad Bhai SKon : @FA @SCS Please check why E0STKC35 shelf are oos 0100505 0200014 0200401 As the shelf is oos, jobs can not be created May 8, 2025 at 1:39 PM, Oláh András : 0100505 memo: Fordslit date: 04.22 19:05:03 0200104 memo: fordpress date: 04.22. 18:54:05 0200401 memo: fordpress date: 04.22. 19:24:45 May 8, 2025 at 2:15 PM, FACS_오창훈_CHANGHOON : 음극 코터 AGV 3232에서 158로 갈때 VEH 알람 지속 발생 중입니다. 확인 부탁합니다. May 8, 2025 at 2:25 PM, FACS_오창훈_CHANGHOON : This message was deleted. May 8, 2025 at 2:28 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Foil Stk 002 “Travel driver error” Thank you May 8, 2025 at 2:29 PM, KIM SEYEON [김세연]_FA : 네 업체인력이 확인할겁니다. May 8, 2025 at 2:29 PM, FACS_JaewonShin : Mistake checking never mind May 8, 2025 at 2:41 PM, Shahbaz 샤바즈 MCS/RTD : @FA There is a transfer command for CA slitter #02 but the port E1SLC020_P01 is OOS. Please confirm. Thank you May 8, 2025 at 2:59 PM, 김대호 (Kim Dae Ho) : Cathode slitet 2 Can you send agv 13 to sliter 5? May 8, 2025 at 3:01 PM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt 2 May 8, 2025 at 3:02 PM, Shahbaz 샤바즈 MCS/RTD : Slither 5 has already job on AGV 09 May 8, 2025 at 3:03 PM, Shahbaz 샤바즈 MCS/RTD : Just unloaded May 8, 2025 at 3:03 PM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 I turned off the R/W panel as part, so don't turn it on. May 8, 2025 at 3:10 PM, Csicskovics Balázs : Anode press 2 U/W a robotkar megállt. Gyertek légyszíves Köszönöm May 8, 2025 at 3:12 PM, FACS_오창훈_CHANGHOON : Solved May 8, 2025 at 3:36 PM, Dániel Hufnágel : @Sazzad Bhai SKon please check press#8 E1PRC080_P01 status May 8, 2025 at 3:36 PM, Dániel Hufnágel : We need roll there May 8, 2025 at 3:37 PM, Shahbaz 샤바즈 MCS/RTD : No lot available May 8, 2025 at 3:38 PM, Dániel Hufnágel : Thank you ! May 8, 2025 at 3:45 PM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD RBC4090, can you check me this roll location please? May 8, 2025 at 3:46 PM, Shahbaz 샤바즈 MCS/RTD : It is at press 8–1 P01 May 8, 2025 at 3:47 PM, Shahbaz 샤바즈 MCS/RTD : Transfer completed at 08/05 14:06 May 8, 2025 at 3:53 PM, Horváth Attila : Coating anod 1 megállt a robot May 8, 2025 at 3:54 PM, 조혜근 : 금일 양극 슬리터 4,5호기 R&R 종료시 1,2호기로 이동예정이라서 점검 진행하셔도 될것같습니다. May 8, 2025 at 3:55 PM, Horváth Attila : Elindult May 8, 2025 at 4:10 PM, 서지원 : @FA @Kim Dongju(김동주)_FA 금일 양극 코팅 4라인 R@R AGV 사용 원활하게 진행 될수있도록 현장에서 많은 도움주셔서 감사드립니다! May 8, 2025 at 4:42 PM, Shahbaz 샤바즈 MCS/RTD : @FA There is a transfer command for AN slitter #04 but the port E1SLA040_P01 is OOS. Please confirm. Thank you May 8, 2025 at 4:45 PM, Dániel Hufnágel : Delete please this order! May 8, 2025 at 4:45 PM, Dániel Hufnágel : AGV should not bring material for slitt line 4-5! May 8, 2025 at 4:46 PM, Dániel Hufnágel : Thank you! May 8, 2025 at 4:46 PM, Sazzad Bhai SKon : This was a manual job , anyway I deleted May 8, 2025 at 4:47 PM, Dániel Hufnágel : Ohh okey, thank you May 8, 2025 at 5:36 PM, Semenszki Péter : Sziasztok! A fólia raktár ajtaját valószínűleg nem jó sorrendben zárták be és megálljt. Újra tudnátok indítani? May 8, 2025 at 5:38 PM, Hári Zoltàn : Az egyik zsanér is el van törve sajnos May 8, 2025 at 5:40 PM, Dániel Hufnágel : Már megy is! May 8, 2025 at 6:33 PM, Szeitz Flórián : Sziasztok! Katód press 1-2 re nem érkezik az anyag. Lehetséges nem talàl az AGV . Megnéznètek légyszives. Köszönöm May 8, 2025 at 6:40 PM, VK (mcs) : There is no available material May 8, 2025 at 6:46 PM, Simon Attila F. A. : A fólia1 raktár manual portjának az ajtaja megint le van szakadva. A zsanérok cseréje szükséges. May 8, 2025 at 6:51 PM, VK (mcs) : @FA Please check Anode Roll STK A33 RBA1602 does not transfer. May 8, 2025 at 7:42 PM, Czél Tamás : Sziasztok Katód 1-es roll raktár hibában áll. Kérlek nézzétek meg. Köszönöm May 8, 2025 at 7:45 PM, Skwarek Tibor : Kész May 8, 2025 at 8:08 PM, VK (mcs) : @FA Please check Anode Roll STK A32 and A34 Carriers in auto port are not transferred. May 8, 2025 at 8:09 PM, Skwarek Tibor : We are here, working on it. May 8, 2025 at 8:24 PM, Simon Attila F. A. : A fólia 1 raktár manual port ajtaja ideiglenesen javítva egy jól működő ajtóról átszerelt zsanérral. Továbbra is szükséges a javítása, de most működik. May 8, 2025 at 9:06 PM, Szeitz Flórián : Sziasztok! Anód roll raktár 3 stokerbe a 24es AGV kiállt hibára May 8, 2025 at 9:08 PM, Skwarek Tibor : Megyünk May 8, 2025 at 9:12 PM, Mucsenbacher_Jozsef : Sziasztok Anod 1 2/rw a avg megállt . SOS May 8, 2025 at 9:13 PM, Viczai Tamás : Megyünk May 8, 2025 at 9:38 PM, VK (mcs) : @FA Please check Anode reel conveyor E0CNVA51 (6019)(6018) Run time over ! May 8, 2025 at 9:46 PM, Skwarek Tibor : Checking May 8, 2025 at 9:48 PM, Czél Tamás : Sziasztok Az anód oldali reel raktár megadta magát, kérlek nézzetek rá. Köszönöm May 8, 2025 at 9:49 PM, Skwarek Tibor : Done May 8, 2025 at 10:49 PM, Szeitz Flórián : Sziasztok! Anód Slitt 5 re gyertek légyszives. Leszedő robot probléma. Köszönöm May 8, 2025 at 10:49 PM, Skwarek Tibor : Megyünk May 8, 2025 at 11:05 PM, VK (mcs) : @FA Please check Anode Roll STK A32 port 1 is manual mode There is transfer to the STK May 8, 2025 at 11:06 PM, Simon Attila F. A. : I'm here. May 8, 2025 at 11:06 PM, Simon Attila F. A. : This port now not working. I call help... May 8, 2025 at 11:12 PM, Simon Attila F. A. : Az anód roll 31es raktár manual port ajtaja is le van szakadva. Több ajtón is vannak törött zsanérok. Más megoldás kellene, mert ezek gyengék. May 9, 2025 at 1:34 AM May 9, 2025 at 1:34 AM, Oleksii Krasnoshchok : Hello in anode press 8 r/w transfer stopped May 9, 2025 at 1:35 AM, Simon Attila F. A. : Coming. May 9, 2025 at 1:38 AM, Simon Attila F. A. : Done. May 9, 2025 at 1:55 AM, Czél Tamás : Sziasztok Katód Slitt 3-ra kérnék segítséget, a robot megállt letolás közben Köszönöm May 9, 2025 at 1:55 AM, Viczai Tamás : Megyünk May 9, 2025 at 6:02 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 9, 2025 at 6:04 AM, Hakim/Ivancsa FA : Hello one agv is showing charging timeout and also its showing the screen has been touched check before you are going to control May 9, 2025 at 6:04 AM, 방혁 PM(Bang.Hyuk) FA : Day Shift FA Technician Schedule Date: 25. May. 9 Time: 06:00~18:00 1. BANG HYUK May 9, 2025 at 6:05 AM, Hakim/Ivancsa FA : Should I go to manual and go to driving safety and select mute ? May 9, 2025 at 6:09 AM, Szücs Géza FT-B : Please share the location and AGV number in these events. Thank you very much. May 9, 2025 at 6:10 AM, Hakim/Ivancsa FA : The agv is in the anode side May 9, 2025 at 6:10 AM, Hakim/Ivancsa FA : Error number 3 May 9, 2025 at 6:11 AM, Hakim/Ivancsa FA : Electode May 9, 2025 at 6:11 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián töltőnél hibában álló AGV-t javítsátok légyszives May 9, 2025 at 6:13 AM, Czeilinger Krisztián : Megyünk. May 9, 2025 at 6:24 AM, Czeilinger Krisztián : Kész May 9, 2025 at 6:32 AM, Pintér Gábor : 2es agv megállt coating anód 2 segítsetek kérlek May 9, 2025 at 6:32 AM, Czeilinger Krisztián : Megyünk. May 9, 2025 at 6:38 AM, Czeilinger Krisztián : Kesz May 9, 2025 at 6:46 AM, Szarka Adrián : Sziasztok anod Slitt 5 gépre gyertek kerlek May 9, 2025 at 6:46 AM, Viktoriia Hleba : 5 slitter anode r/w robot problema May 9, 2025 at 6:46 AM, Szarka Adrián : Fény függöny be nyúlt az operator es le állt a robot menet közben May 9, 2025 at 6:46 AM, Czeilinger Krisztián : Megyünk. May 9, 2025 at 7:08 AM, Viktoriia Hleba : 1slitter anode nincs AGV - 20 perc May 9, 2025 at 7:17 AM, duzzaman Md (MCS) : AGV 17 is going . Thank you May 9, 2025 at 7:19 AM, Erik Gerzsenyi : Anod slitt 2-re 33 perce varjuk az AGV-t May 9, 2025 at 7:20 AM, Viktor Vadas : Sziasztok! Coating foliaraktarhoz kernenk egy ujrainditast! Koszonom May 9, 2025 at 7:21 AM, Czeilinger Krisztián : Megyek. May 9, 2025 at 7:31 AM, Viktoriia Hleba : 2 slitt anode nincs Agv - 45 perc May 9, 2025 at 7:31 AM, Erik Gerzsenyi : . May 9, 2025 at 7:32 AM, Czeilinger Krisztián : Kész. May 9, 2025 at 7:35 AM, 김대호 (Kim Dae Ho) : Did the facility stop due to Agv problem? @Erik Gerzsenyi May 9, 2025 at 7:36 AM, Rácz Dániel / FA : Anód roll raktárban AGV torlódás miatt késik a 17-es AGV. May 9, 2025 at 7:39 AM, 배일명 : 안녕하세요 양극1라인 agv 사용해도될까요? May 9, 2025 at 7:39 AM, Rácz Dániel / FA : @Erik Gerzsenyi @Szarka Adrián @Nagy Dávid 4 Valaki jöjjön Katód press 2 UW-hez köszönöm. May 9, 2025 at 7:39 AM, Szücs Géza FT-B : el sem hiszed mennyire May 9, 2025 at 7:39 AM, Erik Gerzsenyi : Yes May 9, 2025 at 7:40 AM, Nagy Dávid 4 : Szabin vagyok bocsi nem tudok menni (haha)(haha)(haha)(haha) May 9, 2025 at 7:40 AM, Erik Gerzsenyi : Most jottunk ki megyunk meetingre May 9, 2025 at 7:40 AM, Erik Gerzsenyi : Mi a baj? May 9, 2025 at 7:40 AM, Rácz Dániel / FA : Semmi baj jó pihenést ! 😎 May 9, 2025 at 7:41 AM, Rácz Dániel / FA : A 12-es AGV neki ment egy kézi kocsinak ami neki ment egy jumbo rollnak. Van látható sérülés a rollon ezt szerettem volna jelezni. May 9, 2025 at 7:42 AM, Szücs Géza FT-B : merre? May 9, 2025 at 7:43 AM, Rácz Dániel / FA : Akkor készítek fényképet róla May 9, 2025 at 7:43 AM, Szücs Géza FT-B : megvan May 9, 2025 at 7:46 AM, Szücs Géza FT-B : csináltam képet. Sérült Roll a CA press 2 mögött a falnál. May 9, 2025 at 7:46 AM, Erik Gerzsenyi : Koszonom May 9, 2025 at 7:46 AM, Viktoriia Hleba : 15 perce nem jön AGV katód slitt 3-ra. May 9, 2025 at 7:50 AM, Rácz Dániel / FA : @duzzaman Md (MCS) please check, thank you. May 9, 2025 at 7:53 AM, Szarka Adrián : Kerlek anod Press 3 menjetek nem indul el uw oldalon a robot May 9, 2025 at 7:53 AM, Szarka Adrián : Indulni szeretnénk a gépet May 9, 2025 at 7:53 AM, Szarka Adrián : Köszönöm May 9, 2025 at 7:53 AM, Rácz Dániel / FA : @fa ? May 9, 2025 at 7:57 AM, duzzaman Md (MCS) : You would be receiving soon. Everything is okay from MCS.thank you. May 9, 2025 at 7:58 AM, Rácz Dániel / FA : Buffer Mode-ot beszabad kapcsolni ? May 9, 2025 at 7:58 AM, FACS_JaewonShin : ■ 9th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 9, 2025 at 7:59 AM, Szücs Géza FT-B : manualban van a port? May 9, 2025 at 8:00 AM, Rácz Dániel / FA : This message was deleted. May 9, 2025 at 8:01 AM, Rácz Dániel / FA : This message was deleted. May 9, 2025 at 8:01 AM, Szarka Adrián : 4 gépen ? May 9, 2025 at 8:01 AM, Rácz Dániel / FA : Nem tudom, anód press 3 May 9, 2025 at 8:02 AM, Szücs Géza FT-B : ACS-ben manual módban van a port. nálad? May 9, 2025 at 8:04 AM, Rácz Dániel / FA : Nem tudom, a 11 es AGV már hozza a rollt. A bufferen volt egy sérült jumbo, azt fogják most az EQ1-ből kiszedni kézi kocsival. Azért nem mozdult meg a transfer, mert a buffer mode ki volt kapcsolva. May 9, 2025 at 8:05 AM, Rácz Dániel / FA : CA slitt 3-ra nincs order May 9, 2025 at 8:06 AM, Rácz Dániel / FA : Kérlek ellenőrizd van e rá elérhető jumbo roll. Köszönöm May 9, 2025 at 8:06 AM, Szarka Adrián : Attila most nézi a panelt. Elvileg most kapcsolta be. May 9, 2025 at 8:06 AM, Rácz Dániel / FA : Igen ott voltam May 9, 2025 at 8:08 AM, duzzaman Md (MCS) : There is active LR but no search lot. Jobs will be created as soon as there is lot available. May 9, 2025 at 8:08 AM, Rácz Dániel / FA : Köszönöm May 9, 2025 at 8:08 AM, Rácz Dániel / FA : @Viktoriia Hleba May 9, 2025 at 8:09 AM, duzzaman Md (MCS) : Nins mit May 9, 2025 at 8:25 AM, Rácz Dániel / FA : @Szarka Adrián Anód press 4 en be van kapcsolva a buffer mode ! May 9, 2025 at 8:26 AM, Szarka Adrián : Köszönöm szépen. Annyi hogy nézd meg kerlek hogy hozza e a rollt az agv. Amit hajnalban a Coating be küldött azt kell nekünk gyártani. Köszönöm szépen May 9, 2025 at 8:27 AM, Rácz Dániel / FA : A 7 es AGV ebben a pillanatban vitte oda May 9, 2025 at 8:29 AM, Viktoriia Hleba : 2 slitter anode nincs AGV - 30 perc May 9, 2025 at 8:30 AM, Szarka Adrián : Emoticons May 9, 2025 at 8:30 AM, Rácz Dániel / FA : A 7 es AGV nem sokára vinni fogja May 9, 2025 at 9:05 AM, FACS_오창훈_CHANGHOON : 헝가리 테크니션 작업 중 양극 코터 1호기 1ST R/W 파손 상황입니다. 피엠님 현장 확인 부탁 드립니다 May 9, 2025 at 9:14 AM, KIM SEYEON [김세연]_FA : 확인해보겠습니다 May 9, 2025 at 9:17 AM, Szücs Géza FT-B : ok, im gonout May 9, 2025 at 9:19 AM, duzzaman Md (MCS) : @FA E0CNVC51_08_202 Data missmatch error Thank you May 9, 2025 at 9:44 AM, Viktoriia Hleba : 15 perc - nincs AGV . 1 slitter anode May 9, 2025 at 9:44 AM, Viktoriia Hleba : 3 slitter cathode nincs AGV - 15 perc May 9, 2025 at 9:45 AM, Szarka Adrián : Anod Press 2 gépen a robot le vette az agv rol a rollt es meg is állt. Gyertek kerlek nézzetek meg. Köszönöm May 9, 2025 at 9:45 AM, Rácz Dániel / FA : A 23 as AGV most veszi fel a raktárból a jumbot May 9, 2025 at 9:49 AM, Rácz Dániel / FA : Nem látok rá feladatot, lehet hogy nincs elérhető anyag May 9, 2025 at 9:49 AM, Szarka Adrián : Miért ilyen lassan jönnek az agv ? Reggel óta elég sokat álltunk már ez miatt May 9, 2025 at 9:49 AM, Rácz Dániel / FA : @Szücs Géza FT-B May 9, 2025 at 9:50 AM, Szücs Géza FT-B : jeleztem a főnökségnek a hibát. May 9, 2025 at 9:50 AM, Szarka Adrián : Köszönöm May 9, 2025 at 9:50 AM, Erik Gerzsenyi : Anod slitt 1-2-re megint fel oraja varunk May 9, 2025 at 9:51 AM, Szücs Géza FT-B : """csak amíg nem magyar teknikus rontja el, addig nem figyelnek*** May 9, 2025 at 9:59 AM, Hakim/Ivancsa FA : Hello the charger is not connecting to the agv May 9, 2025 at 10:02 AM, 조혜근 : 음극 프레스 2호기 UW측 이재기가 버퍼에 롤을 내려놓을때 한쪽으로 치우쳐서 내려놨습니다. 확인 부탁 드립니다. 최근에 같은 현상이 종종 발생했었습니다. May 9, 2025 at 10:04 AM, Szücs Géza FT-B : need more informations. area, side, AGV number May 9, 2025 at 10:08 AM, Zaman/Ivancsa FA : Can anyone please send the schedule of bus to Ivàncsa from Dunaújváros? May 9, 2025 at 10:12 AM, 조혜근 : @방혁 PM(Bang.Hyuk) FA 안녕하세요. PM님 현재 현지 FA가 임시조치 하였는데 한번더 같은 내용 발생시 재티칭 요청드려도 될까요? May 9, 2025 at 10:13 AM, Rácz Dániel / FA : Photo May 9, 2025 at 10:16 AM, Rácz Dániel / FA : Photo May 9, 2025 at 10:17 AM, Rácz Dániel / FA : @Zaman/Ivancsa FA May 9, 2025 at 10:17 AM, Rácz Dániel / FA : @Zaman/Ivancsa FA May 9, 2025 at 10:18 AM, Zaman/Ivancsa FA : Thank you so much 😊 May 9, 2025 at 10:22 AM, Viktoriia Hleba : 1 slitter anode nincs Agv 15 perc May 9, 2025 at 10:24 AM, Rácz Dániel / FA : @duzzaman Md (MCS) Please check available material. Thank you May 9, 2025 at 10:25 AM, Sazzad Bhai SKon : Vehicle assigned, AGV 17 coming with RBA1757 May 9, 2025 at 10:26 AM, Rácz Dániel / FA : Thank you May 9, 2025 at 10:26 AM, Rácz Dániel / FA : @Viktoriia Hleba May 9, 2025 at 10:38 AM, 김대호 (Kim Dae Ho) : Why do you keep getting delayed? Is there a problem? May 9, 2025 at 10:39 AM, Sazzad Bhai SKon : There was no search lot available, as soon as it was available job created May 9, 2025 at 10:43 AM, FACS_오창훈_CHANGHOON : @MCS 음극 롤스태커 E1CTA32_P01 RBA1623 남아있어 다음 작업 진행이 안되고 있습니다. 삭제 부탁합니다. The Anod roll stacker E1CTA32_P01 RBA1623 remains and prevents further work from being done. Please delete it. May 9, 2025 at 11:00 AM, duzzaman Md (MCS) : The carrier was removed at E1PRA020_P01 at 21:53 yesterday May 9, 2025 at 11:02 AM, Viktoriia Hleba : 2 slitter anode nincs 40 perc May 9, 2025 at 11:02 AM, Viktoriia Hleba : Agv May 9, 2025 at 11:05 AM, Rácz Dániel / FA : Anód 31es raktárból most fogja felvenni a jumbo rollt a 17es AGV May 9, 2025 at 11:08 AM, FACS_JaewonShin : Anode stk 32 is stopped Sensor cable disconnected May 9, 2025 at 11:12 AM, Hakim/Ivancsa FA : Error 2 The agv is in steady mode not moving May 9, 2025 at 11:24 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA32_P01 SERVO MOTOR ALARM OCCURED Since 10:54 Thanks May 9, 2025 at 11:27 AM, Rácz Dániel / FA : thanks for the info, CS is working on it May 9, 2025 at 11:28 AM, duzzaman Md (MCS) : Appreciate your support. May 9, 2025 at 11:28 AM, Rácz Dániel / FA : Welcome Sir ! 🤗 May 9, 2025 at 11:41 AM, FACS_JaewonShin : Cable connection fixed. Anode stk 32 is running May 9, 2025 at 11:52 AM, Szarka Adrián : Anod 4 roll raktár kicsit betegen mozog. A kiadó porton a roll nagyon billeg, olyan mint ha a forgató motor ki be kapcsolna May 9, 2025 at 11:53 AM, Szücs Géza FT-B : @Pálosi Róbert légyszives mérjétek fel a helyzetet May 9, 2025 at 11:54 AM, Czeilinger Krisztián : Rendben,megyünk. May 9, 2025 at 11:58 AM, Szarka Adrián : Vissza mentem velük meg mutattam melyik es mit csinált. Érdekes látvány volt én meg nem láttam ilyet. May 9, 2025 at 12:15 PM, 이게리 : Dear FA Team! Please share currently why can not use AGV on Anode 1 and 2??? Cathode 1 AGV : (thumbsup) Anode 1 AGV : 🆖 Anode 2 AGV : 🆖 May 9, 2025 at 12:15 PM, 이게리 : We have skillful manpower only with AGV operation. Without it We need to stop the line and Downtime will be reported May 9, 2025 at 12:16 PM, 이게리 : *Coating May 9, 2025 at 12:16 PM, 이게리 : @KIM SEYEON [김세연]_FA I would really appreciate some communication from FA side May 9, 2025 at 12:30 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B please check it May 9, 2025 at 12:32 PM, Szücs Géza FT-B : techhnicians are on. the area.. May 9, 2025 at 12:41 PM, Viktoriia Hleba : 1 slitter anode nincs AGV - 50 perc 2 slitter anode nincs Agv - 30 perc May 9, 2025 at 12:41 PM, Anton Mashchenko : Hello, anode press 2, R/W robot error! Help! Thanks! May 9, 2025 at 12:46 PM, Koncz Tamás : Dear Geri. We also use the Anode line #1 with AGV-S and An Line #2 also can work with AGV-s. Only the Foil support cant do with Foil AGV-s May 9, 2025 at 12:48 PM, Rácz Dániel / FA : готовий May 9, 2025 at 12:48 PM, Hakim/Ivancsa FA : Hello E1 CTC010 Here E1 is red What does it mean May 9, 2025 at 12:52 PM, Rácz Dániel / FA : Я не бачу замовлення на AGV, можливо, матеріал відсутній May 9, 2025 at 12:53 PM, Szücs Géza FT-B : Manufacturing share this information: Temperature (B4) R-T, sensor will be replaced on the dryer (Ca1) coating. Korean colleague gave the information. As soon as they stop, they will be replaced. May 9, 2025 at 12:56 PM, Szarka Adrián : Anod Slitt 1-2 nem megy az agv kb 1 órája megtudjátok nézni miért ? Én a mesben látok még ra roll. Köszönöm May 9, 2025 at 12:57 PM, Szücs Géza FT-B : @mcs can you check please the avalaible materials to E1SLA010_P01 E1SLA020_P02 Thank you May 9, 2025 at 12:59 PM, Rácz Dániel / FA : @termelés Anód roll raktárban az AGV-k nem tudnak közlekedni megfelelően, kérlek a kézi anyagmozgatókat valahol máshol tároljátok. Köszönöm May 9, 2025 at 1:01 PM, Rácz Dániel / FA : Néztem egy pár perce, de nem láttam hogy lenne elérhető anyag. 🙁 May 9, 2025 at 1:01 PM, duzzaman Md (MCS) : E1SLA010_P01: NO LOT AVAILABLE E1SLA020_P02: 252 THANK YOU May 9, 2025 at 1:05 PM, Szücs Géza FT-B : emailben küldtem képeket is. sok esetben nem fényképeztem, csak arrébb tettem az otthagyott dolgokat..... Az AGV-k ezért is késnek.... May 9, 2025 at 1:06 PM, 이게리 : I Check it, and Follow it up with our Colleagues. I will share the Coating AGV status also May 9, 2025 at 1:11 PM, Rácz Dániel / FA : Értem, én is arrébb tettem az útban lévő dolgokat, csak gondoltam jelzem. May 9, 2025 at 1:14 PM, Szücs Géza FT-B : igazából nem neked szólt, csak hozzáfűztem +ban May 9, 2025 at 1:37 PM, Szücs Géza FT-B : Photo May 9, 2025 at 1:44 PM, Szücs Géza FT-B : This message was deleted. May 9, 2025 at 1:52 PM, Viktoriia Hleba : anode slitt 5 nincs tálca May 9, 2025 at 1:56 PM, Czeilinger Krisztián : This message was deleted. May 9, 2025 at 1:57 PM, Czeilinger Krisztián : Slitt 5-re nincs order,anyag sincs. May 9, 2025 at 2:09 PM, Erik Gerzsenyi : Nem jumbot várunk rá May 9, 2025 at 2:09 PM, Erik Gerzsenyi : Hanem üres tálcát May 9, 2025 at 2:09 PM, Erik Gerzsenyi : De most jelenleg jott par darab May 9, 2025 at 2:10 PM, Czeilinger Krisztián : Bocsánat, elnéztem. May 9, 2025 at 2:13 PM, Szücs Géza FT-B : 13:44kor jeleztem, hogy jelezték, hogy visszaindult a raktár May 9, 2025 at 2:18 PM, Czeilinger Krisztián : Mennek a tálcák de lassan. Fél emeleten. May 9, 2025 at 2:27 PM, Anton Mashchenko : Come to anode slitt 2, AGV 1 error! Help! May 9, 2025 at 2:35 PM, Viktoriia Hleba : anode 1 slitt nincs agv - 50 perc May 9, 2025 at 2:38 PM, duzzaman Md (MCS) : Unfortunately, no materials are available May 9, 2025 at 4:20 PM, Hakim/Ivancsa FA : 1 coating is done waiting for agv but agvs are in steady mode May 9, 2025 at 4:37 PM, Hakim/Ivancsa FA : 3 agvs are in steady mode May 9, 2025 at 4:37 PM, Hakim/Ivancsa FA : In anode coating site May 9, 2025 at 4:40 PM, Erik Gerzsenyi : Katod press 2 rw megallt az agv May 9, 2025 at 4:40 PM, 서지원 : @FA @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 음극 코팅2라인 2nd R/W 이재기 구동시 소음 발생 및 미작동으로 생산 멈췄습니다. 조립 공급을 위해 3개라인이 동시 가동중이며 작업자 부족으로 자동화 물류 사용이 필수적인데 이런 상황이면 저희 한개라인 끊고 조립 쇼티지 감당하면서 수동물류 진행해야합니다. 현장에 대응인력이 상주하는데도 해당 문제가 왜 발생하는지 확인 부탁드리겠습니다. May 9, 2025 at 4:41 PM, KIM SEYEON [김세연]_FA : 네 확인해보겠습니다 May 9, 2025 at 4:41 PM, 김건희 : @KIM SEYEON [김세연]_FA 양극 프래스 2호기에 16번 agv가 멈춰 ㅇ있습니다 해당 롤 수동 불출 해야하는데 바로 가능하실까요 May 9, 2025 at 4:44 PM, KIM SEYEON [김세연]_FA : 이건 테크니션이 갈겁니다 May 9, 2025 at 4:45 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please arrange fa technician to ca press #2 May 9, 2025 at 4:45 PM, KIM SEYEON [김세연]_FA : agv is stopped May 9, 2025 at 4:47 PM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián @Rácz Dániel / FA légyszives valaki nézze meg, én még poron vagyok May 9, 2025 at 4:49 PM, KIM SEYEON [김세연]_FA : maybe retry May 9, 2025 at 4:49 PM, KIM SEYEON [김세연]_FA : please go and check May 9, 2025 at 4:50 PM, Czeilinger Krisztián : Rendben. Megyünk. May 9, 2025 at 4:54 PM, Pálosi Róbert : Solved May 9, 2025 at 5:40 PM, Viktoriia Hleba : 1 slitter cathode nincs tálca May 9, 2025 at 5:42 PM, Sazzad Bhai SKon : Lr received but no search lot May 9, 2025 at 5:43 PM, Szarka Adrián : Katod oldalon nincs reel tálca May 9, 2025 at 5:49 PM, 김대호 (Kim Dae Ho) : Cathode sliter empty tray is not coming. May 9, 2025 at 5:50 PM, Sazzad Bhai SKon : Checking May 9, 2025 at 5:50 PM, Mohammad Amir : Issue has been resolved ✅. Cathode trays on the way. Thank you very much! May 9, 2025 at 5:52 PM, 김대호 (Kim Dae Ho) : If there is no ball tray in the priority, please raise the priority. There is no one in Sleating Unit 2, and please fill the conveyor. May 9, 2025 at 5:52 PM, Mohammad Amir : Sure Working on it. May 9, 2025 at 5:55 PM, Sazzad Bhai SKon : Sure, we Will increase the priority for current jobs from MCS ui May 9, 2025 at 5:57 PM, Mohammad Amir : I have given priorities to empty trays Cathode untill the CNV is filled with trays. ✅ I am monitoring. Thank you very much! May 9, 2025 at 6:04 PM, 김대호 (Kim Dae Ho) : Thank you so much. 👍👍👍👍 May 9, 2025 at 6:04 PM, Mohammad Amir : You are welcome! May 9, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 9, 2025 at 6:39 PM, Mohammad Amir : For your information:- Now CNVC51 is filled with empty trays ✅. I am making process Normal. Feel free to reach out to me again if you face any issue. Thank you very much! May 9, 2025 at 6:53 PM, 김대호 (Kim Dae Ho) : Thank you !!! May 9, 2025 at 6:53 PM, Mohammad Amir : You are welcome! May 9, 2025 at 7:15 PM, (Unknown) : Sziasztok.Anód Slitt 5 leszedő robot megált csak kattog.megnéznétek?köszi May 9, 2025 at 7:15 PM, Mr.Miti (미티) FA : Persze megyek May 9, 2025 at 7:19 PM, 이주봉PM LEE JUBONG(FA) invited 최명운(CHOI MYOUNGWOON). May 9, 2025 at 7:22 PM, 최명운(CHOI MYOUNGWOON) invited 김정희(Jeong hee FA). May 9, 2025 at 7:57 PM, Zaman/Ivancsa FA invited Atif/Ivancsa FA and waseem/ Iváncsa Fa. May 9, 2025 at 7:58 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51_6217 there is servo motor alarm occured. Thank you very much! May 9, 2025 at 9:18 PM, Mr.Miti (미티) FA : @Mohammad Amir Good evening! Please check available materials to anode slitt 3. Thank you very much! May 9, 2025 at 9:19 PM, Mohammad Amir : Good evening, Unfortunately, currently there is no material available. Thank you! May 9, 2025 at 9:20 PM, Mr.Miti (미티) FA : Thank you very much! May 9, 2025 at 9:21 PM, Mohammad Amir : You are welcome! May 9, 2025 at 10:08 PM, Kurgya Attila : Sziasztok Anod roll raktárban az 1es raktár ajtaját már csak egy zsanér fogja. Meg tudnátok nézni? Köszi May 9, 2025 at 10:15 PM, Mr.Miti (미티) FA : Meg de zsanérunk nincs May 9, 2025 at 10:17 PM, Kurgya Attila : Akkor ha nem lehet megoldani el kell kezdenünk másik raktárat használni. Ez így balesetveszélyes. May 9, 2025 at 10:20 PM, (Unknown) : Anód Slitt 5 robot kar ki ált hibára.megnéznétek?köszi May 9, 2025 at 10:20 PM, Mr.Miti (미티) FA : Felőlem mehet. May 9, 2025 at 10:35 PM, adambenczik : Kész May 9, 2025 at 10:46 PM, Zaman/Ivancsa FA : Cathod slitt avg 1 - not moving May 9, 2025 at 10:46 PM, Zaman/Ivancsa FA : Solved ✅ May 9, 2025 at 10:50 PM, (Unknown) : Katód slitt 5 az 1-es AGV ki ált hibára.Megnéznétek?köszi May 9, 2025 at 10:52 PM, Zaman/Ivancsa FA : @Mr.Miti (미티) FA May 9, 2025 at 10:52 PM, Mr.Miti (미티) FA : ? May 9, 2025 at 10:53 PM, Zaman/Ivancsa FA : . May 9, 2025 at 10:55 PM, Mr.Miti (미티) FA : I see May 10, 2025 at 1:26 AM May 10, 2025 at 1:26 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVC51 _08_004/005 there is InV-01 run time over error and it is blocking materials transfer. Thank you very much! May 10, 2025 at 1:41 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check this error still exists since 1:24. Thank you very much! May 10, 2025 at 1:41 AM, Mohammad Amir : There is queue of materials on the CNVC51 because of this issue. Thank you very much! May 10, 2025 at 1:58 AM, Mohammad Amir : @adambenczik Please check E0CNVC51 _08_004/005 are still OOS cause these are in Manual mode that's why still there is a queue of materials waiting on the CNV. Thank you very much! May 10, 2025 at 2:00 AM, Mr.Miti (미티) FA : Stay calm. We are on it May 10, 2025 at 2:01 AM, Mohammad Amir : Thank you very much! May 10, 2025 at 2:06 AM, cehmannzsoltcehmann : Solved May 10, 2025 at 2:06 AM, Mohammad Amir : Thank you very much for your hardwork! Materials transfer have been normalized ✅. May 10, 2025 at 2:56 AM, (Unknown) : Katód Roll raktárba a 11-es AGV letért az útvonalról .megnéznétek?köszi May 10, 2025 at 3:00 AM, Mohammad Amir : @adambenczik @FA Please check E0STKC31_C01 there is SCP main power CP trip error. Thank you! May 10, 2025 at 3:07 AM, (Unknown) : Katód 1-es raktárba a daru kiált hibára.megnéznétek?köszönöm May 10, 2025 at 3:12 AM, adambenczik : Kész May 10, 2025 at 4:10 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVC51 _08_004/005 there is INV-01 run time over error and it is blocking materials transfer. Thank you very much! May 10, 2025 at 4:33 AM, Magyar Dániel : Vakaki legyen szíves ránézni az anod roll raktár #1 -re. May 10, 2025 at 4:35 AM, Mr.Miti (미티) FA : Mi a baj vele ? May 10, 2025 at 4:35 AM, Magyar Dániel : Door open error May 10, 2025 at 4:39 AM, adambenczik : SCP power trip volt, de csak a door open hibát írta ki May 10, 2025 at 4:40 AM, Mr.Miti (미티) FA : Ajjajj May 10, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 7/12 Tech, 1Sl Overtime(0): Holiday(3): Pintye Miklós, Kovács Ágnes, Boromisza Zoltán Sick(2): Gerbovits Kevin, BöröczbTamás --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(1): Denkó János --------------- The number of technicians is low. In all areas. May 10, 2025 at 6:08 AM, Erik Gerzsenyi : Sziasztok! Folyamatos jelenletet szeretnek kerni coatingra, mert ha nem mennek az AGV-k meg fog allni valamelyik sor letszam hianya miatt!!!! May 10, 2025 at 6:08 AM, Erik Gerzsenyi : Koszonom May 10, 2025 at 6:16 AM, Szücs Géza FT-B : AN slitt cv, lift3nál hiba @Pálosi Róbert intézkedés szükséges May 10, 2025 at 6:17 AM, Czeilinger Krisztián : Megyünk. May 10, 2025 at 6:19 AM, Viktor Vadas : Sziasztok! Katod 1en az egyik Agv felmondta a szolgalatot menet kozben es megallt! Utbaigazitast szeretnenk kerni neki, koszonjuk! May 10, 2025 at 6:21 AM, Szarka Adrián : Sziasztok Anod Slitt 2 re nem jön az agv 15 perce May 10, 2025 at 6:22 AM, Czeilinger Krisztián : Nemsokára megyünk. May 10, 2025 at 6:29 AM, Czeilinger Krisztián : Nincs még order rá . May 10, 2025 at 6:32 AM, Czeilinger Krisztián : Csináljuk. May 10, 2025 at 6:32 AM, Shahbaz 샤바즈 MCS/RTD : No material available for An Slitter #02. May 10, 2025 at 6:51 AM, Viktor Vadas : Ismet megtortent May 10, 2025 at 7:36 AM, 박정근(Park) : 음극코터1라인 이재기위에 롤대기중 현재 리와인더 다음 롤 컷팅후 취외못하고있습니다. 곧 정지시켜야하는데 대응이 너무 느립니다. May 10, 2025 at 7:42 AM, 서지원 : @FA 음극 코팅 1라인 2일간 가동률 98% 수준으로 한번도 안멈추고 운영중인데 계속 유지될수있도록 빠른 대응 부탁드립니다 May 10, 2025 at 7:43 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please FA technicians can check this immediately. thanks. May 10, 2025 at 7:45 AM, 박정근(Park) : 음극코터1라인 이재기 문제로 라인정지했습니다. May 10, 2025 at 7:45 AM, KIM SEYEON [김세연]_FA : 죄송합니다. May 10, 2025 at 7:48 AM, KIM SEYEON [김세연]_FA : 김동주피엠님이 들어가고 계시니 조금 기다려주십시오. May 10, 2025 at 7:49 AM, Szarka Adrián : press 4 anod, u/w robot probléma legyszives nézzetek meg köszönöm May 10, 2025 at 8:05 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check anode Reel conveyor A51 track error. Thank you May 10, 2025 at 8:12 AM, Viktoriia Hleba : Anod slit 3 a tarca nem Jo pozicia May 10, 2025 at 8:12 AM, Szarka Adrián : Anod slit 3 a tarca nem jó pozíció nézzetek meg kerlek köszönöm May 10, 2025 at 8:16 AM, Szücs Géza FT-B : úton May 10, 2025 at 8:22 AM, Viktoriia Hleba : 1-2 slitter cathode nincs Agv - 40 perc May 10, 2025 at 8:24 AM, Shahbaz 샤바즈 MCS/RTD : Slitter-1 AGV#09 is on the way May 10, 2025 at 8:24 AM, Czeilinger Krisztián : Kész. May 10, 2025 at 8:26 AM, Shahbaz 샤바즈 MCS/RTD : CA Slitter 2 no material available now. May 10, 2025 at 8:55 AM, Kim Dongju(김동주)_FA : 음극 롤 창고 내에 팔렛트 대차가 있어 AGV주행 알람이 지속 발생하고 있습니다. 현장 정리 부탁드립니다. May 10, 2025 at 9:04 AM, 김건희 : Cathode roll storage 1 some error happen please check it May 10, 2025 at 9:05 AM, 김건희 : IPS reading fail May 10, 2025 at 9:09 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please FA tech check it. May 10, 2025 at 9:11 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA again this problem on STKA31 May 10, 2025 at 9:31 AM, Viktoriia Hleba : 2 slitter cathode nincs tálca May 10, 2025 at 9:34 AM, Czeilinger Krisztián : Mennek a tálcák. May 10, 2025 at 9:38 AM, Szarka Adrián : Press 4 re mikor jön az agv az rw oldalra mert mindjárt kész a következő roll de az agv sehol nincs May 10, 2025 at 9:40 AM, Szarka Adrián : Megtudjátok nézni miért nem jön a reel talca katod slittre ? Nagyon lassan érkezik nekünk meg tölteni kéne a raktárát !! Köszönöm May 10, 2025 at 9:40 AM, Szarka Adrián : @김건희 May 10, 2025 at 9:42 AM, 김건희 : @Kim Dongju(김동주)_FA 양극 슬리터 트래이 공급 부족합니다 ㅠ 양극 슬리터 2호기는 지금부터 비가동 예종이고 양극 슬리터 1호기는 20분 후 멈춰 질 듯 합니다 May 10, 2025 at 9:44 AM, Csanálosi Gábor FA : C52-ben 10 feladat van, ebből 8 üres tálca a slittre May 10, 2025 at 9:44 AM, Csanálosi Gábor FA : Most kezdi őket pakolni May 10, 2025 at 9:44 AM, Szarka Adrián : Miért ilyen lassú a raktár ? Mert áll a Slitt gep miatta May 10, 2025 at 9:45 AM, Csanálosi Gábor FA : Fizikai oka most nincs, nem volt hiba sem. May 10, 2025 at 9:45 AM, Csanálosi Gábor FA : Nem tudom May 10, 2025 at 9:46 AM, Szarka Adrián : Katod Slitt 3 nem ért ide az agv May 10, 2025 at 9:46 AM, Szarka Adrián : Katod Slitt 1-2 nincs agv nem hozza a roll May 10, 2025 at 9:48 AM, Czeilinger Krisztián : C slitt 2-re a 9 agv visz anyagot. May 10, 2025 at 9:49 AM, Czeilinger Krisztián : Nézem a többit is. May 10, 2025 at 9:51 AM, Czeilinger Krisztián : Ca slitt 1-3 még nem látok ordert. May 10, 2025 at 9:52 AM, Shahbaz 샤바즈 MCS/RTD : CA slitter 1,3 LR is up but there is no material available. Job will be created once there is a material availability. Thank you. May 10, 2025 at 10:02 AM, Shahbaz 샤바즈 MCS/RTD : Slitter Next lot quantity available Slitter line 1,2,4,5 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 00 • Cathode: 00 Thank you May 10, 2025 at 10:04 AM, 김건희 : @KIM SEYEON [김세연]_FA 양극 slitter 2호기 tray 없습니다. May 10, 2025 at 10:06 AM, Shahbaz 샤바즈 MCS/RTD : CA Reel trays are arriving May 10, 2025 at 10:07 AM, Szarka Adrián : Katod Slitt 3 nem jön az agv vág ha úton van az is kevés mert lassú May 10, 2025 at 10:07 AM, Szarka Adrián : Áll a Slitt gép mert nincs másik roll May 10, 2025 at 10:08 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Anode roll stk A31. Thank you May 10, 2025 at 10:09 AM, Czeilinger Krisztián : Working May 10, 2025 at 10:19 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check the roll RBC1726 at E0STKC32_P01, it was assigned to Slitter 3 but not moving. Thank you May 10, 2025 at 10:22 AM, Szücs Géza FT-B : what is destination to RBC1726 in mcs? May 10, 2025 at 10:22 AM, Shahbaz 샤바즈 MCS/RTD : E1SLC030_P01 May 10, 2025 at 10:23 AM, Szücs Géza FT-B : thy May 10, 2025 at 10:25 AM, Szücs Géza FT-B : most viszi az agv May 10, 2025 at 10:26 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 음극 코터 AGV 총 5대 준비 시켜뒀습니다. 1,2라인 AGV 사용 가능합니다. 제가 주간 모니터링 계속하겠습니다 May 10, 2025 at 10:27 AM, 서지원 : 네 감사합니다! 지금처럼 양1 음1 음2 AGV 지속 사용하겠습니다!! May 10, 2025 at 10:28 AM, 배병민 (Bae Byoungmin) : 넵 May 10, 2025 at 10:29 AM, Anton Mashchenko : Hello, Anode 2 press robot u/w error! Help! May 10, 2025 at 10:30 AM, Szücs Géza FT-B : @Czeilinger Krisztián légyszives May 10, 2025 at 10:32 AM, Czeilinger Krisztián : Rendben megyek. May 10, 2025 at 10:35 AM, Kim Dongju(김동주)_FA : @서지원 @김건희 PM님 AGV#11위의 롤 Ca.창고로 투입 완료 했습니다. May 10, 2025 at 10:37 AM, 서지원 : 네 감사합니다! May 10, 2025 at 10:37 AM, 김건희 : @KIM SEYEON [김세연]_FA PM님 양극 Reel 950~1000m로 권취 늘려도 자동화는 괜찮을까요 지금 coating Roll이 2800~3000m 언저리로 보내고 있는데 그러면 슬리터에서는 700m 단위로 끊어서 트레이 소모만 많이 되고 있습니다 May 10, 2025 at 10:41 AM, KIM SEYEON [김세연]_FA : 피엠님 그거 바로하면 무게 때문에 컨베이어 에러 다발할것 같은데 차주에 준비하고 진행하면 어떨까요? @김건희 May 10, 2025 at 10:42 AM, 김희용 : @김건희 피엠님 1000m 권취시에 직경이 얼마나 될까요? 바로 도면 보겠습니다. 추가확인 -기존에 Ford에 권취 Max 900m로 전달된것으로 아는데 해당부분 괜찮을지? - 현대쪽은 따로 전달했던 기억은 없습니다. May 10, 2025 at 10:42 AM, KIM SEYEON [김세연]_FA : 우선 지금 바꾸면 어떤 변경점 일어날지 몰라서 가능한한 차주 주간에 했음 합니다. May 10, 2025 at 10:43 AM, 김건희 : 넵 저도 오늘 바로 바꿀생각은 아니였습니다 May 10, 2025 at 10:44 AM, KIM SEYEON [김세연]_FA : 넵 감사합니다. 차주 같이 진행하시죠 May 10, 2025 at 10:46 AM, 김희용 : 예예 1000m 직경정보알려주시면 도면으로 가능여부 확인부터 하겠습니다 May 10, 2025 at 10:46 AM, Viktoriia Hleba : This message was deleted. May 10, 2025 at 10:47 AM, Viktoriia Hleba : nincs tálca 2 slitt cathode May 10, 2025 at 10:47 AM, Szücs Géza FT-B : nézem May 10, 2025 at 10:50 AM, Szücs Géza FT-B : hiba nincs, a raktárak terheltek May 10, 2025 at 10:54 AM, Szarka Adrián : Anod Press 2 robot probléma uw May 10, 2025 at 10:54 AM, Szücs Géza FT-B : megyek May 10, 2025 at 10:54 AM, Szarka Adrián : Gyertek kerlek köszi May 10, 2025 at 11:33 AM, Viktoriia Hleba : 2 slitt cathode nincs talca May 10, 2025 at 11:35 AM, Shahbaz 샤바즈 MCS/RTD : Trays on the way May 10, 2025 at 11:36 AM, 김건희 : 직경: 43cm 무게: 130kg 정도 될 듯 합니다 May 10, 2025 at 11:42 AM, Szücs Géza FT-B : intéztem, nyomatékosítottam May 10, 2025 at 11:46 AM, Czeilinger Krisztián : Mennek ,csak lassú a tálca szállítás. May 10, 2025 at 11:54 AM, Szücs Géza FT-B : @Hakim/Ivancsa FA please go out dinner, together May 10, 2025 at 12:39 PM, Szarka Adrián : Anod Press 4 gépen az uw robot megint ki kapcsolt May 10, 2025 at 12:39 PM, Szarka Adrián : Gyertek kerlek May 10, 2025 at 12:40 PM, Szarka Adrián : Szervo hiba ez ma már a 3-4 negyedik ilyen gond csak eddig mindig itt volt a koreai csapat és ők nyomtak ki May 10, 2025 at 12:40 PM, Szarka Adrián : Anod Press 3 gépen meg nem jön az agv May 10, 2025 at 1:00 PM, Szarka Adrián : Ezt meg tudjatok nézni kerlek mi lehet a baj ? May 10, 2025 at 1:03 PM, Czeilinger Krisztián : Nézem egy pillanat. May 10, 2025 at 1:05 PM, Czeilinger Krisztián : Nem látok ordert rá. May 10, 2025 at 1:06 PM, Szücs Géza FT-B : gondolom ACSben May 10, 2025 at 1:06 PM, Szücs Géza FT-B : MCSben sem látni rá ordert May 10, 2025 at 1:13 PM, Szarka Adrián : De eddig hozta csak ki mentek az operátorok enni. Be van nyomva a kérelem is de semmi May 10, 2025 at 1:16 PM, Czeilinger Krisztián : @Mohammad Amir Please check the number of lots. May 10, 2025 at 1:18 PM, Szücs Géza FT-B : E1PRA030_P01 May 10, 2025 at 1:19 PM, Shahbaz 샤바즈 MCS/RTD : An Press 3 available lots : 33 May 10, 2025 at 1:23 PM, Shahbaz 샤바즈 MCS/RTD : Slitter Roll available quantity: Slitter line 1,2,4,5 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 01 • Cathode: 00 Press Roll available quantity: Press line 1,2,7,8 • Anode: 08 • Cathode: 14 Press line 3,4 • Anode: 33 • Cathode: 18 Thank you May 10, 2025 at 1:29 PM, Shahbaz 샤바즈 MCS/RTD : @FA There is a job for AN slitter # 03 but the port P01 is OOS. Please confirm. Thank you May 10, 2025 at 1:48 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check port P01 OoS May 10, 2025 at 1:53 PM, Szücs Géza FT-B : @Kim Dongju(김동주)_FA @방혁 PM(Bang.Hyuk) FA can u help me? Im going to the powder area at now May 10, 2025 at 1:57 PM, Szarka Adrián : 15-18 számú agv amivel ki alltatok a víz miatt, be kapcsolta a koreai Kollega és ki is állt hibára May 10, 2025 at 1:57 PM, Szarka Adrián : Anod Press 4 uw oldalán. Gyertek kerlek köszi May 10, 2025 at 1:58 PM, Szücs Géza FT-B : @Czeilinger Krisztián légyszives nézd meg May 10, 2025 at 2:03 PM, Czeilinger Krisztián : Nézzük. May 10, 2025 at 2:08 PM, Szarka Adrián : @Szücs Géza FT-B van anyag a raktárban, nem tudod miért nem jön anod Press 4 re az agv ? Most néztem megint meg a mest és rengeteg anyag van ra. Köszönöm a segítséget May 10, 2025 at 2:10 PM, Rácz Dániel / FA : @Szücs Géza FT-B Légyszíves kérd meg a bent munkálkodó kék ruhásokat, hogy ne nyúljanak az AGV-k hez ha azokat Navitrolozom. Szóltam neki hogy ne nyúljanak hozzá, visszakapcsolták autoba. Ott hagytam eljöttem onnan. May 10, 2025 at 2:11 PM, Rácz Dániel / FA : Jelezni szeretném hogy kb egymásnak is mentek ez miatt az AGV-k, mert még nem megfelelő pozícióban vannak a térképen. May 10, 2025 at 2:12 PM, Rácz Dániel / FA : Illetve ez miatt a termelést is hátráltatjuk, mert blokkolják az AGV-k az útvonalat. May 10, 2025 at 2:21 PM, Czeilinger Krisztián : @Viktoriia Hleba A 24-es AGV ,most veszi fel a jumbot a 32-es roller raktárból,hamarosan érkezik AN slitt 3-ra. May 10, 2025 at 2:23 PM, Czeilinger Krisztián : @Viktoriia Hleba A cathode reel conveyoron lassan érkeznek az üres tálcák. May 10, 2025 at 2:28 PM, Szarka Adrián : Valaki ? May 10, 2025 at 2:28 PM, Rácz Dániel / FA : Checking please May 10, 2025 at 2:29 PM, Rácz Dániel / FA : Én nem rátok rá feladatot, szerintem nincs elérhető anyag az MCS szerint. May 10, 2025 at 2:31 PM, Szarka Adrián : De a Coating küldi be egyfolytában és a 4 gépre meg hozza May 10, 2025 at 2:32 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD please check this port why not come the jumbo roll E1PRA040_P01 May 10, 2025 at 2:32 PM, Szücs Géza FT-B : bocsi poron vagyok, utána meg ebédelni fogok, van bent több telepítő céges ls @mcs tudja csekkolni, hogy van-e áru a raktárban az adott gépre May 10, 2025 at 2:34 PM, Shahbaz 샤바즈 MCS/RTD : RBA2049 transfer completed at 14:24 and there is no LR received after this. May 10, 2025 at 2:36 PM, Szarka Adrián : 12:00 óta várja az anyagot a gép, be van nyomva a rendelés és teljesen üres a gép. 3 helyre kéne már roll May 10, 2025 at 2:38 PM, Rácz Dániel / FA : I go to check May 10, 2025 at 2:39 PM, Shahbaz 샤바즈 MCS/RTD : Please LR if rolls are needed, there are Rolls available in the stocker for pressing. Thank you May 10, 2025 at 2:40 PM, Shahbaz 샤바즈 MCS/RTD : Press Roll available quantity: Press line 1,2,7,8 • Anode: 03 • Cathode: 02 Press line 3,4 • Anode: 18 • Cathode: 16 Thank you May 10, 2025 at 2:43 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD there is no available material for E1PRA030_P01 ? May 10, 2025 at 2:46 PM, Shahbaz 샤바즈 MCS/RTD : There are rolls available for transfer. May 10, 2025 at 2:47 PM, Shahbaz 샤바즈 MCS/RTD : Please raise LR if needed. Thank you May 10, 2025 at 3:04 PM, Szarka Adrián : Anod Press 4 gépen megint le halt a robot szervo probléma miatt. Megint úgy ahogy szokott ment hatra és megállt May 10, 2025 at 3:05 PM, Rácz Dániel / FA : Jövök May 10, 2025 at 3:12 PM, Rácz Dániel / FA : EL GF AN PR #04 UW Need korean support ! Jumbo roll position porblem on buffer. Thank you May 10, 2025 at 3:16 PM, Rácz Dániel / FA : @Szücs Géza FT-B please help me, because of big problem. Thank you May 10, 2025 at 3:18 PM, Rácz Dániel / FA : Csináltunk róla fényképet, nem tudunk tovább várni, mert meg fog állni a termelés. Manualisan elhárítom a hibát. May 10, 2025 at 3:29 PM, Hamza/Ivancsa FA : Agv 22 cargo status abnormal error at cathode roll storage 4 May 10, 2025 at 3:29 PM, Hamza/Ivancsa FA : Please check it May 10, 2025 at 3:32 PM, Erik Gerzsenyi : #9- es AGV megallt anod coating 1-nel May 10, 2025 at 3:41 PM, 박정근(Park) : 음극코터2라인 현지 테크니션 조치가 조금 늦어지는데 혹시 대응가능하신분 계신가요?? May 10, 2025 at 3:42 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 확인부탁드립니다 May 10, 2025 at 3:47 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B can you check coater 2line anode? May 10, 2025 at 3:48 PM, Erik Gerzsenyi : Mindjart megint a sor… legyszives jojjon valaki aki ert is hozza, mert itt szerencsetlenkedunk megint az AGV-vel May 10, 2025 at 3:48 PM, Erik Gerzsenyi : Mindjart megall megint* May 10, 2025 at 3:59 PM, Szücs Géza FT-B : @Czeilinger Krisztián mi a helyzet? @Hakim/Ivancsa FA have problem? May 10, 2025 at 4:05 PM, Czeilinger Krisztián : Gabibara segit. May 10, 2025 at 4:05 PM, Czeilinger Krisztián : Megyek be tablet és ahhoz tartozó kábelért. May 10, 2025 at 4:10 PM, Shahbaz 샤바즈 MCS/RTD : Slitter Roll available quantity: Slitter line 1,2,4,5 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 00 • Cathode: 00 Press Roll available quantity: Press line 1,2,7,8 • Anode: 06 • Cathode: 18 Press line 3,4 • Anode: 38 • Cathode: 13 Thank you May 10, 2025 at 4:19 PM, 박정근(Park) : 음극코터 2라인 조치완료됐습니다. 빠른대응감사합니다 May 10, 2025 at 4:29 PM, Szarka Adrián : Anod Press 4 uw robot szervo May 10, 2025 at 4:30 PM, Szarka Adrián : Probléma gyertek kerlek May 10, 2025 at 4:36 PM, Czeilinger Krisztián : Megyek. May 10, 2025 at 4:40 PM, Czeilinger Krisztián : Kész. May 10, 2025 at 4:44 PM, Szarka Adrián : Anod Slitt nincs talca May 10, 2025 at 4:44 PM, Szarka Adrián : Nézzetek meg kerlek May 10, 2025 at 4:44 PM, Szarka Adrián : Köszönöm May 10, 2025 at 4:44 PM, Czeilinger Krisztián : Rendben. May 10, 2025 at 4:46 PM, 김희용 : @김건희 사양상은 가능하고 실제 테스트를 좀 해봐야 할거같아서 (창고간 포트쪽이 무게증가시 문제없는지) 월욜에 논의좀 하시지요 피엠님! May 10, 2025 at 4:48 PM, Czeilinger Krisztián : Van tálca,lassan érkeznek az E0STKA52-ből a tálcák. May 10, 2025 at 4:49 PM, Szarka Adrián : Ez már vicc… May 10, 2025 at 4:50 PM, Szarka Adrián : Anod Slitt 4 gépnél meg állt a talca de nem megy tovabb May 10, 2025 at 4:50 PM, Shahbaz 샤바즈 MCS/RTD : Please check LTA1188 is not moving on the conveyor May 10, 2025 at 4:52 PM, Szarka Adrián : Itt áll és nem megy tovább May 10, 2025 at 4:53 PM, Czeilinger Krisztián : Megoldva. May 10, 2025 at 4:59 PM, Szarka Adrián : Köszönöm szépen May 10, 2025 at 5:13 PM, Viktoriia Hleba : 3 slitter cathode convejor stop May 10, 2025 at 5:13 PM, Szarka Adrián : Nézzetek meg kerlek köszönöm May 10, 2025 at 5:16 PM, Czeilinger Krisztián : Megyünk nemsokára. May 10, 2025 at 5:22 PM, Rácz Dániel / FA : Kész, már mennek e reel-ek. 🫡 May 10, 2025 at 6:00 PM, Mohammad Amir : @FA Please check E0STK001_C01 there is Hoist RLS Error. Thank you! May 10, 2025 at 6:00 PM, Mr.Miti (미티) FA : On my way May 10, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 6:21 PM, (Unknown) : Anód press 5-mögött a 15- ős AGV kiált hibára.megnéznétek?köszi May 10, 2025 at 6:32 PM, Mohammad Amir : Slitter Roll available quantity: Slitter line 1,2,4,5 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 00 • Cathode: 02 Press Roll available quantity: Press line 1,2,7,8 • Anode: 03 • Cathode: 22 Press line 3,4 • Anode: 01 • Cathode: 10 Thank you very much! May 10, 2025 at 6:34 PM, Balogh Ádám : Sziasztok a porra szeretnek kerni embert anyag kiszedéshez anodon a rossz airshower miatt May 10, 2025 at 6:41 PM, Powder tréner : Hello. we need these materials on powder anode side: 10 palletts cp3k 112-00242A 20 palletts m36h 112-00237A 10 pallets M36H 112-00247A 5 palletts bsk10t 112-00239A Thank you May 10, 2025 at 6:41 PM, Mohammad Amir : Good Evening, Checking. Thank you very much! May 10, 2025 at 6:54 PM, Sárvári Márk : Üdv Anod 1re FA segítséget kérnénk, köszönjük May 10, 2025 at 6:55 PM, Szeitz Flórián : Sziasztok! Anód slitt 2re nincs reel tálca. Légyszives nézzétek meg . Köszönöm May 10, 2025 at 6:57 PM, Mr.Miti (미티) FA : Mennek a talcak csak lassan. Raktár hiba volt emiatt késlekednek a tálcák. May 10, 2025 at 7:37 PM, Powder tréner : Sziasztok,poron anód raktár kiált hibára. May 10, 2025 at 7:55 PM, Balogh Ádám : Poron elfogyott a tölthető anyag, ha sikerül majd kikérni manuálisan újra indul a töltés May 10, 2025 at 7:55 PM, Balogh Ádám : Majd jelezzetek mikor tudtok küldeni embert May 10, 2025 at 8:05 PM, Mohammad Amir : All requested materials have been transferred ✅. Except 112-00247A ,there was only 8 materials available so I have transferred all 8 materials. Feel free to contact me again if you need any further assistance. Thank you very much! May 10, 2025 at 8:19 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 1-2 re nem jönnek a tálcák May 10, 2025 at 8:19 PM, Karina Lyzanets : Nézzetek meg kérlek May 10, 2025 at 8:19 PM, Mohammad Amir : Checking May 10, 2025 at 8:19 PM, Karina Lyzanets : Köszönöm May 10, 2025 at 8:21 PM, Mohammad Amir : Empty trays on the way from STKC52 ✅ @FA @Mr.Miti (미티) FA please check E0STKC51 _C01 Port interface Error. It is slowing down trays transfer speed. Thank you very much! May 10, 2025 at 8:22 PM, Mr.Miti (미티) FA : Cheking May 10, 2025 at 8:57 PM, Szeitz Flórián : Sziasztok! Anód press 3-4 re nem érkezik roll megnéznétek az okát? May 10, 2025 at 8:58 PM, Mohammad Amir : Good evening, Checking! May 10, 2025 at 9:05 PM, Mohammad Amir : There is Carrier location mismatched that's why Rolls are not arriving for both Press-3&4 Anode . Please can you confirm me current location of RBA0641? Thank you very much! May 10, 2025 at 9:05 PM, Szeitz Flórián : Még mindig fennt áll ez a hiba. May 10, 2025 at 9:05 PM, Mr.Miti (미티) FA : Mind a kettőre úton van a roll May 10, 2025 at 9:06 PM, Mr.Miti (미티) FA : Tévedtem. May 10, 2025 at 9:06 PM, Mr.Miti (미티) FA : A túloldalról megy el 🤣 May 10, 2025 at 9:06 PM, Mohammad Amir : There is Carrier location mismatched that's why Rolls are not arriving for both Press-3&4 Anode . Please can you confirm me current location of RBA0641? Thank you very much! May 10, 2025 at 9:07 PM, Mr.Miti (미티) FA : In RTD rba0641 in STKA32 May 10, 2025 at 9:08 PM, Mohammad Amir : @adambenczik @FA Please check E0CNVC51 _08_004/005 there is INV-01 run time over error and it is blocking materials transfer. Thank you very much! May 10, 2025 at 9:09 PM, Mohammad Amir : Thank you very much for the confirmation. May 10, 2025 at 9:10 PM, Mohammad Amir : Could you please press LR for both Press-3&4 Anode,Again. Thank you very much! May 10, 2025 at 9:11 PM, Mr.Miti (미티) FA : Yes. A second please May 10, 2025 at 9:13 PM, Mr.Miti (미티) FA : Solved May 10, 2025 at 9:13 PM, Vlad Danilevskyi : Hello. Anode press 4 Agv RW problem. Thanks May 10, 2025 at 9:13 PM, Mohammad Amir : Thank you very much! May 10, 2025 at 9:14 PM, Mr.Miti (미티) FA : Done May 10, 2025 at 9:14 PM, Mr.Miti (미티) FA : You’re welcome! May 10, 2025 at 9:15 PM, Mohammad Amir : Checking May 10, 2025 at 9:15 PM, Mohammad Amir : Issue has been resolved ✅. Rolls on the way for both Press-3 &4 Anode. I am monitoring. Thank you very much! May 10, 2025 at 9:15 PM, Mr.Miti (미티) FA : Thank you very much? May 10, 2025 at 9:15 PM, Mr.Miti (미티) FA : ! May 10, 2025 at 9:15 PM, Mohammad Amir : @Mr.Miti (미티) FA @Szeitz Flórián For your information Thank you very much! May 10, 2025 at 9:16 PM, Mohammad Amir : You are welcome! May 10, 2025 at 9:22 PM, Mohammad Amir : Please check is there any maintenance,STKA31 is in Open door and because of this job for Press-3 Anode is pending. Thank you very y! May 10, 2025 at 9:22 PM, Mohammad Amir : Thank you very much**! May 10, 2025 at 9:22 PM, Szeitz Flórián : Thanks. May 10, 2025 at 9:23 PM, Mohammad Amir : You are welcome! May 10, 2025 at 9:53 PM, Mohammad Amir : @adambenczik @FA Please check E0CNVC51 _08_078/077 there is INV-01 run time over error and it is blocking empty trays delivery. Thank you very much! May 10, 2025 at 9:56 PM, Mr.Miti (미티) FA : Checking May 10, 2025 at 9:57 PM, Karina Lyzanets : Sziasztok Gyertek valaki a Slitt Cathode 2 re May 10, 2025 at 9:57 PM, Karina Lyzanets : Köszönöm szépen May 10, 2025 at 10:09 PM, Mr.Miti (미티) FA : Solved May 11, 2025 at 2:02 AM May 11, 2025 at 2:02 AM, Szeitz Flórián : Sziasztok! Katód press 3ra nem érkezik anyag. Megerősítést kérnék ,hogy már az AGV nem tud kihozni mivel úgy látja nincs elérhető készlet ?! Köszönöm May 11, 2025 at 2:03 AM, Mohammad Amir : Checking May 11, 2025 at 2:04 AM, Mohammad Amir : Currently, unfortunately there is no material available. There is an active LR so as soon as materials will be available job will be created. Thank you very much! May 11, 2025 at 2:06 AM, Szeitz Flórián : Rendben. May 11, 2025 at 2:50 AM, 이주봉PM LEE JUBONG(FA) : Anode coater agv 2 check please May 11, 2025 at 2:55 AM, Mr.Miti (미티) FA : Im here. May 11, 2025 at 2:58 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51_06_043/42 there is INV-01 Run time Over Error. Thank you very much! May 11, 2025 at 2:58 AM, Mr.Miti (미티) FA : Checking May 11, 2025 at 3:02 AM, Szeitz Flórián : Sziasztok! Anód slittre nem érkezik az üres reel tálca. Légyszives nézzétek meg. Köszönöm May 11, 2025 at 3:02 AM, Mr.Miti (미티) FA : Nézem pillanat May 11, 2025 at 3:02 AM, Mohammad Amir : There an issue with E0CNVA51 it is blocking trays delivery. @Mr.Miti (미티) FA already working on it. Thank you very much! May 11, 2025 at 3:04 AM, Mohammad Amir : @Szeitz Flórián this is the issue ,for your information. Thank you very much! May 11, 2025 at 3:07 AM, Mr.Miti (미티) FA : Solved. Trays on the way May 11, 2025 at 3:07 AM, Mr.Miti (미티) FA : Mennek mennek May 11, 2025 at 3:08 AM, Szeitz Flórián : Köszönöm May 11, 2025 at 3:08 AM, Mr.Miti (미티) FA : Szívesen! May 11, 2025 at 4:54 AM, Kurgya Attila : Segítséget kérek fólia raktárba. Köszönöm May 11, 2025 at 4:54 AM, adambenczik : Itt vagyunk May 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12+1+1 Tech, 1Sl Overtime(0): Holiday(2): Kovács Ágnes, 방혁_이반차 Sick(1): Gerbovits Kevin Shift Change(1): Böröczki Balázs --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok May 11, 2025 at 6:14 AM, Szarka Adrián : Jó reggelt anod Slitt 2 nincs agv 15 perce nézzetek ra kerlek köszi May 11, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.11 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 11, 2025 at 6:17 AM, 류종석(RyuJongSeok) : Coating Anode Line1 Transfer not work now May 11, 2025 at 6:18 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! There is no material available for AN slitter# 02 May 11, 2025 at 6:20 AM, 류종석(RyuJongSeok) : 코팅 음극1라인 1st 리와인더 작동 하지 않아 지금 나온 롤은 수동으로 처리 하겠습니다. May 11, 2025 at 6:21 AM, Viktoriia Hleba : 3 slitter cathode r/w robot problema Kérem, nézze meg. May 11, 2025 at 6:24 AM, Rácz Dániel / FA : Jövünk May 11, 2025 at 6:24 AM, Szarka Adrián : Anod Press 4 uw robot szervo hiba ( ami tegnap is volt ) May 11, 2025 at 6:27 AM, Szücs Géza FT-B : kész May 11, 2025 at 6:51 AM, Szarka Adrián : Katod Slitt 1-2 miért nem jön az agv ? May 11, 2025 at 6:54 AM, Rácz Dániel / FA : AN 2-3 kis konvejornál a teli reel tálca elakadt a prízmában. Várjuk a fényképezőt. Lehet szerszámért is elkell menjünk. Légyszíves ne nyúljatok hozzá. Köszi May 11, 2025 at 6:54 AM, Baek Hojong(백호종)FA : @Shahbaz 샤바즈 MCS/RTD Katod Slitt 1-2 miért nem jön az agv ? Check plz May 11, 2025 at 6:54 AM, Rácz Dániel / FA : *slitt May 11, 2025 at 6:56 AM, Shahbaz 샤바즈 MCS/RTD : Slitter Next lot quantity available Slitter line 1,2,4,5 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 10 • Cathode: 04 Thank you May 11, 2025 at 6:56 AM, Shahbaz 샤바즈 MCS/RTD : Currently there is no roll available. May 11, 2025 at 6:57 AM, Rácz Dániel / FA : @Viktoriia Hleba May 11, 2025 at 6:58 AM, Viktoriia Hleba : please check May 11, 2025 at 7:02 AM, Shahbaz 샤바즈 MCS/RTD : Job created now and roll is transferring now. May 11, 2025 at 7:06 AM, Shahbaz 샤바즈 MCS/RTD : Press Roll available quantity: Press line 1,2,7,8 • Anode: 04 • Cathode: 02 Press line 3,4 • Anode: 41 • Cathode: 00 Thank you. May 11, 2025 at 7:08 AM, Rácz Dániel / FA : LTA8660 May 11, 2025 at 7:08 AM, Rácz Dániel / FA : LTA0860 May 11, 2025 at 7:09 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CA Roll stk C33 “Travel lag error” Thank you May 11, 2025 at 7:14 AM, Rácz Dániel / FA : OMW May 11, 2025 at 7:27 AM, Szarka Adrián : press 4 anod robot hiba u/w May 11, 2025 at 7:28 AM, Szarka Adrián : Nézzetek meg kerlek May 11, 2025 at 7:40 AM, Rácz Dániel / FA : Ideiglenes megoldva, de sajnos a hiba oka továbbra sincs meg. May 11, 2025 at 7:44 AM, Szarka Adrián : Katod Press 3 gépnél a 14 agv a kanyarban meg állt hibával May 11, 2025 at 7:45 AM, Rácz Dániel / FA : Ez után a hiba után nem központosan teszi rá a jumbo rollt a buffer re. Lehet hogy a hiba már a roll raktárban keletekezik, de az is lehet hogy a transfer levételnél. Hmm… May 11, 2025 at 7:48 AM, Czeilinger Krisztián : Megyek. May 11, 2025 at 8:10 AM, Szücs Géza FT-B : kimegyek szüncsire, meg a porra, coating most jól megy May 11, 2025 at 8:14 AM, Szarka Adrián : Anod konvejor meg állt. Help help köszi May 11, 2025 at 8:14 AM, Szarka Adrián : Nem állhat meg a termelés May 11, 2025 at 8:14 AM, Czeilinger Krisztián : Sziasztok. Valaki tudna segíteni CA oldalon agv be? May 11, 2025 at 8:14 AM, Czeilinger Krisztián : Elektroda May 11, 2025 at 8:14 AM, Viktoriia Hleba : Kérem, nézze meg.Köszönöm May 11, 2025 at 8:16 AM, Csanálosi Gábor FA : Melyik? A 7-es? May 11, 2025 at 8:17 AM, Csanálosi Gábor FA : Jövök May 11, 2025 at 8:17 AM, Czeilinger Krisztián : Rendben. May 11, 2025 at 8:21 AM, Viktor Vadas : Sziasztok! Anod 1en a 2es rewindernel megallt az agv, utbaigazitas szukseges May 11, 2025 at 8:21 AM, Viktor Vadas : Koszonjuk! May 11, 2025 at 8:26 AM, Szarka Adrián : 12 agv is le állt May 11, 2025 at 8:27 AM, Szarka Adrián : Katod Press 7-8 gep előtt May 11, 2025 at 8:27 AM, Szarka Adrián : 9 agv is meg állt ugyan ott May 11, 2025 at 8:28 AM, Szarka Adrián : Ez mióta áll így Viki ? May 11, 2025 at 8:28 AM, Szarka Adrián : 2 órája ? May 11, 2025 at 8:29 AM, Szücs Géza FT-B : épp hogy kimegyek, azt elrontassz mindent Adrián??? amikor ott vagyok nem mered??? May 11, 2025 at 8:29 AM, Erik Gerzsenyi : Anod slitt 2 megallt a conveyor May 11, 2025 at 8:30 AM, Szarka Adrián : Ha működni nem romlana el. Tok mind1 hogy itt vagy, akkor is mindig meg áll May 11, 2025 at 8:30 AM, Szarka Adrián : …. May 11, 2025 at 8:31 AM, Szücs Géza FT-B : kevesebb lenne a bejegyzés, ha csak akkor írnátok ide amikor jó minden 😉🤣 May 11, 2025 at 8:31 AM, Szarka Adrián : Ez lenne a legjobb. De hat majd egyszer működni fog May 11, 2025 at 8:32 AM, Rácz Dániel / FA : Nézem May 11, 2025 at 8:33 AM, Szarka Adrián : Én arra leszek kiváncsi hogy a robotok mikor fogjak feladni a harcot, mivel a gumi szigetelés el van szakadva minden hol és hull ra a kosz és valami fémes cucc is a nem olcsó fogas lecre. De hat én 2 hónapja szóltam 🤷‍♀️🤷‍♀️🤷‍♀️🤷‍♀️🤷‍♀️🤷‍♀️ May 11, 2025 at 8:36 AM, Rácz Dániel / FA : Kész May 11, 2025 at 8:40 AM, Szarka Adrián : press 4 anod robot hiba u/w May 11, 2025 at 8:52 AM, Szarka Adrián : Mindjárt meg áll a gep. Tud jönni valaki ? May 11, 2025 at 8:52 AM, Szarka Adrián : Anod roll raktárban dugó van. 6 agv néz egymással farkas szemet. De nem mozdulnak May 11, 2025 at 8:55 AM, Rácz Dániel / FA : Kèsz 😅 May 11, 2025 at 8:57 AM, Rácz Dániel / FA : Jövünk May 11, 2025 at 8:58 AM, Rácz Dániel / FA : Itt vagyok May 11, 2025 at 9:01 AM, Rácz Dániel / FA : @Viktor Vadas köszi 😎 May 11, 2025 at 9:10 AM, Szarka Adrián : Anod Slitt 3 nem jön az agv már 30 perce May 11, 2025 at 9:10 AM, Rácz Dániel / FA : Nézem May 11, 2025 at 9:11 AM, Rácz Dániel / FA : Anód roll raktárban volt egy kis keveredés a #23 AGV nem sokára viszi May 11, 2025 at 9:14 AM, Szarka Adrián : Mondjuk nem ártana valami jelző fény vagy hang ha valahol torlódás van. Milyen jó megoldás hogy 30 perc után veszi észre az ember hogy hoho valami baj van mert nem jön az agv és körbe kell sétálni a területet hol a baj May 11, 2025 at 9:14 AM, Szarka Adrián : Ez nem nektek szól mert nem a ti hibatok. Hanem aki tervezte ezt May 11, 2025 at 9:15 AM, Szücs Géza FT-B : @mcs a jelzőfény meg vika 🫡😉😂 May 11, 2025 at 9:15 AM, Rácz Dániel / FA : Nem kell körbe sétálni az ACSben meglehet nézni May 11, 2025 at 9:15 AM, Szarka Adrián : De ha nektek ezer dolgozok van akkor nem tudjatok meg nézni May 11, 2025 at 9:16 AM, Szücs Géza FT-B : és MCSben is, meg ccsben is persze akinek nincs a fejében, legyen a lábában 😘🤪 May 11, 2025 at 9:16 AM, Szarka Adrián : Nem a mi dolgunk azok May 11, 2025 at 9:17 AM, Szücs Géza FT-B : de nekünk nem 1000 dolgunk van, hanem 10000 May 11, 2025 at 9:17 AM, Rácz Dániel / FA : Nincs ezer dolgozónk sajnos May 11, 2025 at 9:17 AM, 배일명 : 음극 agv 확인좀 부탁드려요 May 11, 2025 at 9:18 AM, Szarka Adrián : Dani olvasd el rendesen ☺️☺️☺️☺️☺️ May 11, 2025 at 9:18 AM, Rácz Dániel / FA : @Szarka Adrián Gyere légyszíves Ca slitt 1 uw hez, köszönöm May 11, 2025 at 9:19 AM, Szarka Adrián : Pillanat épp anod Press 3 vagyok Kollega el ment a dolgára addig én vagyok itt May 11, 2025 at 9:19 AM, Rácz Dániel / FA : Megyek oda May 11, 2025 at 9:19 AM, Baek Hojong(백호종)FA : 갈께요 May 11, 2025 at 9:21 AM, 배일명 : 창고쪽에서 대기가 많아 늦게 온것 같습니다. 지금 agv 오고있어서 설비는 멈추지 않을것 같습니다 May 11, 2025 at 9:26 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Roll stk C32 “Hoist exact position error after forking “ Thank you May 11, 2025 at 9:30 AM, Szücs Géza FT-B : error reset, activate SCS-ben @valaki légysives May 11, 2025 at 9:30 AM, Rácz Dániel / FA : Omv May 11, 2025 at 9:32 AM, Szücs Géza FT-B : MOL May 11, 2025 at 9:33 AM, Rácz Dániel / FA : Shell May 11, 2025 at 9:33 AM, Czeilinger Krisztián : Solved. May 11, 2025 at 9:34 AM, Mucsenbacher_Jozsef : Coatingon nagyon nagy lett a avg káosz ! SOS segítség kell May 11, 2025 at 9:34 AM, Rácz Dániel / FA : Jövünk May 11, 2025 at 9:34 AM, Shahbaz 샤바즈 MCS/RTD : Thank you May 11, 2025 at 9:35 AM, Szücs Géza FT-B : úton vagyok, most érek vissza porról... már úgy is gyanús volt ez a nagy csend May 11, 2025 at 9:35 AM, Szücs Géza FT-B : nekem még 5-10 perec May 11, 2025 at 9:40 AM, Rácz Dániel / FA : Kis Baek rendezi May 11, 2025 at 9:43 AM, Rácz Dániel / FA : Katód oldalon a 2299-től 2313-as node pontig le van tiltva az útvonal a Ca Press 8 mellett, mert a Termeléses technikusok ott fognak dolgozni. May 11, 2025 at 9:48 AM, Pálosi Róbert : Kössz! May 11, 2025 at 10:03 AM, Rácz Dániel / FA : Igazán nincs mit ! 🙃 May 11, 2025 at 10:05 AM, Szücs Géza FT-B : @Baek Hojong(백호종)FA go auto? May 11, 2025 at 10:06 AM, Baek Hojong(백호종)FA : Manually return it once and then do it automatically May 11, 2025 at 10:07 AM, Baek Hojong(백호종)FA : Manual once only May 11, 2025 at 10:07 AM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD The empty reel trays on conveyor 51 are coming in very handy today May 11, 2025 at 10:08 AM, Shahbaz 샤바즈 MCS/RTD : Anode reel trays? May 11, 2025 at 10:11 AM, Shahbaz 샤바즈 MCS/RTD : There are enough trays in CA side, AN side the job creation is normal but delivery is little bit slow. May 11, 2025 at 10:11 AM, Rácz Dániel / FA : The cathode side is better, but the anode side is not so bad. May 11, 2025 at 10:11 AM, Rácz Dániel / FA : Yes, exactly. May 11, 2025 at 10:13 AM, Shahbaz 샤바즈 MCS/RTD : It’s because of the other tasks for A52 STK, I will monitor it. Thank you. May 11, 2025 at 10:16 AM, Rácz Dániel / FA : Thank you, Sir ! 🫡 May 11, 2025 at 10:52 AM, Szarka Adrián : Anod Slitt 1 re elindult az agv ? May 11, 2025 at 10:52 AM, Czeilinger Krisztián : Nézem. May 11, 2025 at 10:55 AM, Czeilinger Krisztián : Egyenlőre nem látom az orderbe hogy melyik agv viszi az anyagot. May 11, 2025 at 11:57 AM, Szücs Géza FT-B : megyek a porra, Coating a tiétek @Pálosi Róbert @Czeilinger Krisztián @Hakim/Ivancsa FA May 11, 2025 at 11:57 AM, Czeilinger Krisztián : Rendben. May 11, 2025 at 12:42 PM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert @Rácz Dániel / FA valaki légyszives menjen fel CA porra, kívül megállt 2db AGV May 11, 2025 at 12:42 PM, Szücs Géza FT-B : mégse May 11, 2025 at 12:42 PM, Szücs Géza FT-B : sikerült laptopról May 11, 2025 at 12:44 PM, Rácz Dániel / FA : Köszi May 11, 2025 at 12:51 PM, Szücs Géza FT-B : Zoli nyomja, 2t sikerült elindítani, a 3. meg navitrolos lesz May 11, 2025 at 12:52 PM, Szarka Adrián : Katod Press 2 gépen gondolt egyet a buffer és nem működik. Valaki megtudja nézni mi a baja ? May 11, 2025 at 12:54 PM, Szabó Zoltán János : Szeretem a hideg sört, csak így mellékesen kihangsúlyoznám 🤪😀 May 11, 2025 at 12:54 PM, Rácz Dániel / FA : Jövök May 11, 2025 at 1:00 PM, Rácz Dániel / FA : Most már van LR May 11, 2025 at 1:03 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Please check why not come the AGV to CA Press 2 UW ? May 11, 2025 at 1:04 PM, Rácz Dániel / FA : E1PRC020_P01 May 11, 2025 at 1:06 PM, Shahbaz 샤바즈 MCS/RTD : Currently no roll available May 11, 2025 at 1:07 PM, Rácz Dániel / FA : Thank you, Sir ! May 11, 2025 at 1:08 PM, Shahbaz 샤바즈 MCS/RTD : Press Roll available quantity: Press line 1,2,7,8 • Anode: 201 • Cathode: 00 Press line 3,4 • Anode: 03 • Cathode: 00 Thank you. May 11, 2025 at 1:08 PM, Rácz Dániel / FA : Újra indítom a UW transzfert hát ha frissül az adat. May 11, 2025 at 1:12 PM, Szarka Adrián : Ezt jól értem katod Press 1-2 re 0 darab roll van a raktárban ? Nálunk 20 darab van állítólag May 11, 2025 at 1:13 PM, Rácz Dániel / FA : Hát úgy nézki a rendszer szerint 🙁 May 11, 2025 at 1:17 PM, Rácz Dániel / FA : @Szarka Adrián Katód press re nem látok feladatot. Lehet tényleg nincs anyag ahogy az MCS írta. May 11, 2025 at 1:17 PM, Szücs Géza FT-B : csak ezen a 2 pressen nyomjátok azt a fajta anyagot? May 11, 2025 at 1:18 PM, Szücs Géza FT-B : nem, már látom May 11, 2025 at 1:19 PM, Szücs Géza FT-B : CA Press 7,8 megyen-e? May 11, 2025 at 1:19 PM, Szarka Adrián : Nem nem May 11, 2025 at 1:21 PM, Szücs Géza FT-B : lehet hogy a bent lévő áriáu le van foglalva a Press1 számára, így a 2re nem marad. May 11, 2025 at 1:22 PM, Szücs Géza FT-B : ha kevesebb anyag lenne lefoglalva pressenként, akkor könnyebben előfordulhatna, hogy a 2 (vagy 4) press akár egyszerre lefogy és egyszerre állna meg a gyártás May 11, 2025 at 1:23 PM, Szücs Géza FT-B : bemegyek, megnézzük RTDben May 11, 2025 at 1:23 PM, Szarka Adrián : Itt vagyok anod Sl asztal nézem én is hogy mi van egyáltalán meg abból a 20 darabból May 11, 2025 at 1:35 PM, Szücs Géza FT-B : hazucccc May 11, 2025 at 1:37 PM, Szarka Adrián : Át jöttem katod May 11, 2025 at 1:37 PM, Szarka Adrián : 5 db van meg most néztem at May 11, 2025 at 1:40 PM, Rácz Dániel / FA : @"Shuvo/Ivancsa FA" @Hamza/Ivancsa FA Please check Cathode Coating AGV #11 Thank you ! May 11, 2025 at 1:40 PM, Shahbaz 샤바즈 MCS/RTD : Please can you share Carrier ID, there is no lot available according to RTD lot search for CA press 1/2. May 11, 2025 at 1:45 PM, Szarka Adrián : @Szücs Géza FT-B @Rácz Dániel / FA 2 darab roll kéne nekem May 11, 2025 at 1:45 PM, Szarka Adrián : Press 7-8 bufferen van fent May 11, 2025 at 1:47 PM, Szarka Adrián : Át tudjátok hozatni ide ? Állítólag van egy kód amivel vissza lehet vitetni a raktárba és onnan meg ide May 11, 2025 at 1:48 PM, Rácz Dániel / FA : Itt vagyunk May 11, 2025 at 1:48 PM, Szarka Adrián : Merre ? May 11, 2025 at 1:48 PM, Szücs Géza FT-B : nem kaptunk róla oktatást 🤪😂 May 11, 2025 at 2:07 PM, Szücs Géza FT-B : ca press4-7 közötti AGV útvonal lezárva gépkarbantartás miatt. mondjuk erről se volt oktatás XD May 11, 2025 at 2:48 PM, Szücs Géza FT-B : @Szarka Adrián AN Press 2 UW direkt áll? May 11, 2025 at 2:49 PM, Szarka Adrián : Szerintem nem May 11, 2025 at 2:49 PM, Szarka Adrián : Megyek meg nézem mi a hiba oka May 11, 2025 at 2:53 PM, Szücs Géza FT-B : telepítő cég vizsgálja May 11, 2025 at 2:53 PM, Szarka Adrián : Reméljük ra jönnek mi ez a sok szervo hiba May 11, 2025 at 2:59 PM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián CA Press 7 és 8 UW TR-t rakjátok manuálba minél hamarabb légyszives May 11, 2025 at 3:01 PM, Czeilinger Krisztián : Rendben,megyünk. May 11, 2025 at 3:05 PM, Czeilinger Krisztián : Kész. May 11, 2025 at 3:16 PM, Czeilinger Krisztián : Robi csinálta meg. May 11, 2025 at 3:42 PM, Shahbaz 샤바즈 MCS/RTD : Slitter Roll available quantity: Slitter line 1,2 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 18 • Cathode: 00 Press Roll available quantity: Press line 1,2 • Anode: 197 • Cathode: 00 Press line 3,4 • Anode: 45 • Cathode: 00 Thank you May 11, 2025 at 4:05 PM, Szücs Géza FT-B : ca press4-7 közötti AGV útvonalat engedélyezzétek légyszives, termelési gép karbantartása befejeződött @Pálosi Róbert @Czeilinger Krisztián köszönöm szépen May 11, 2025 at 4:07 PM, Pálosi Róbert : Kész May 11, 2025 at 4:40 PM, Viktoriia Hleba : 2 slitter cathode nem jo robot r/w May 11, 2025 at 4:41 PM, Szücs Géza FT-B : @Czeilinger Krisztián May 11, 2025 at 4:49 PM, Szarka Adrián : Robotot vissza kell rakni alap állásba mert nem vitte el a reelt May 11, 2025 at 4:49 PM, Szarka Adrián : Pusher stb…. Vissza állítva May 11, 2025 at 4:49 PM, Szarka Adrián : A oldalon hagyta itt a reelt. B elvitte May 11, 2025 at 4:50 PM, Czeilinger Krisztián : Megyünk. May 11, 2025 at 4:56 PM, Szarka Adrián : Katod press 1 anyagra vár. Megtudjátok mondani hogy jön e arra a gépre vagy sem May 11, 2025 at 4:58 PM, Czeilinger Krisztián : Meg nézem. May 11, 2025 at 4:59 PM, Szücs Géza FT-B : @Shahbaz 샤바즈 MCS/RTD Can u check please, what is RBC1963 destination? May 11, 2025 at 5:01 PM, Czeilinger Krisztián : Szia. Nem látom hogy lenne order rá. May 11, 2025 at 5:01 PM, Shahbaz 샤바즈 MCS/RTD : RBC1963 is in the stocker C34 and there is no transfer command for it. May 11, 2025 at 5:04 PM, Szücs Géza FT-B : thank you very muchh May 11, 2025 at 5:05 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome!! May 11, 2025 at 5:08 PM, Anton Mashchenko : Hello, anode press 1, AGV not coming 10 min! Help! Thanks! May 11, 2025 at 5:10 PM, Shahbaz 샤바즈 MCS/RTD : Unfortunately there is no roll available for transfer. May 11, 2025 at 5:13 PM, Shahbaz 샤바즈 MCS/RTD : RBC1963 there is an issue from MES side “Judge is not OK” so it’s not transferable. May 11, 2025 at 5:15 PM, Szücs Géza FT-B : @Szarka Adrián ezzel én nem tudok mit kezdeni. Te tudsz? May 11, 2025 at 5:19 PM, Viktoriia Hleba : press 4 anode u/w robot hiba May 11, 2025 at 5:19 PM, Szücs Géza FT-B : @Pálosi Róbert légyszi May 11, 2025 at 5:22 PM, Czeilinger Krisztián : Megyunk May 11, 2025 at 5:26 PM, Czeilinger Krisztián : Kész May 11, 2025 at 5:29 PM, Viktoriia Hleba : 2 slitter cathode nem jo robot r/w most May 11, 2025 at 5:33 PM, Viktor Vadas : Katod 1 2es rewinderen megadta magat az AGV May 11, 2025 at 5:33 PM, Viktor Vadas : Helyreigazitast kernenk May 11, 2025 at 5:36 PM, 류종석(RyuJongSeok) : 코팅 양극 1라인좀 확인해주세요 2nd리와인더 agv작동 불량 May 11, 2025 at 5:38 PM, 류종석(RyuJongSeok) : 제발요 May 11, 2025 at 5:40 PM, Czeilinger Krisztián : Megyek. May 11, 2025 at 5:56 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 2 re szeretnék kérni segitséget Transfer robot megállt May 11, 2025 at 5:56 PM, Karina Lyzanets : Gyertek légyszíves May 11, 2025 at 5:57 PM, Karina Lyzanets : Köszönöm szépen May 11, 2025 at 5:57 PM, Karina Lyzanets : R/W May 11, 2025 at 6:08 PM, Vászon Márton : Katód roll raktárban kettő stocker is áll, a prés kettesen meg már nincs amyag. Légyszives csinálja meg valaki amilyen hamar lehet May 11, 2025 at 6:14 PM, VK (mcs) : @FA Please check cathode Roll STK C34 Auto port 1 is in manual mode. There is a job to the Press 2 Thx May 11, 2025 at 6:31 PM, adambenczik : Hibák elhárítva, már csak azt kel megvárni amíg a rendszer automatán elvégzi a dolgát May 11, 2025 at 6:32 PM, adambenczik : I was working on it Thx May 11, 2025 at 6:41 PM, 지호 : 코팅 양극1라인 2번 리와인더 agv 조치부탁드립니다 May 11, 2025 at 6:42 PM, 김태현 : @FA May 11, 2025 at 6:42 PM, adambenczik : English please May 11, 2025 at 6:43 PM, Kurgya Attila : Kérek segítséget katod 1es sorra May 11, 2025 at 6:45 PM, Hakim/Ivancsa FA : E1CTC010-TR01-MCP#2 Is showing error May 11, 2025 at 6:48 PM, Szeitz Flórián : Sziasztok! Katód Slitt 3 ra légyszives nézzétek meg,hogy van e elérhető anyag mèg . Köszönöm May 11, 2025 at 6:48 PM, Powder tréner : Sziasztok,poron Katód raktár nem adja ki E1PLC031_P01 portra az anyagot. Nézzétek rá.Köszönöm. May 11, 2025 at 6:50 PM, VK (mcs) : No available material May 11, 2025 at 6:51 PM, Szeitz Flórián : Köszönöm a megerősítést. May 11, 2025 at 6:52 PM, VK (mcs) : There is no LR May 11, 2025 at 6:59 PM, Balogh Ádám : What is LR ? May 11, 2025 at 6:59 PM, adambenczik : Load Request May 11, 2025 at 6:59 PM, Balogh Ádám : Thank you May 11, 2025 at 7:03 PM, 서지원 : @Fa @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA Could you please explain the situation & reason & counter action why it happens several times on cathode 1st line 2nd R/W today?? Same issue occured in 1 hour again! May 11, 2025 at 7:03 PM, 서지원 : . May 11, 2025 at 7:04 PM, KIM SEYEON [김세연]_FA : 이재기에 IPS센서 에러입니다. 현재 보유 센서스티커로 리커버리 시도해보겠습니다. May 11, 2025 at 7:14 PM, Hakim/Ivancsa FA : One agv is not offloading the anode I mean it tried 6 times but still it can't In anode E0STK31 Its going inside and again coming out May 11, 2025 at 7:16 PM, Hakim/Ivancsa FA : What to do it's not working I tried 2 times again it going in and coming out May 11, 2025 at 7:23 PM, (Unknown) : Katód slitt 2 robot leszedő megált menet közbe.megnéznétek?köszönöm May 11, 2025 at 7:25 PM, Lee Junghan(이정한)_CS : What's the AGV error? May 11, 2025 at 7:26 PM, adambenczik : Retry error May 11, 2025 at 7:26 PM, Hakim/Ivancsa FA : No the agv is not in the right position The technician came May 11, 2025 at 7:26 PM, Lee Junghan(이정한)_CS : What's the AGV number? May 11, 2025 at 7:26 PM, Hakim/Ivancsa FA : 3 May 11, 2025 at 7:28 PM, Lee Junghan(이정한)_CS : let us know after the technician checked? May 11, 2025 at 7:28 PM, Hakim/Ivancsa FA : Ok they are checking May 11, 2025 at 7:28 PM, Lee Junghan(이정한)_CS : Thanks May 11, 2025 at 7:38 PM, adambenczik : AGV#3 could not deliver the material to STKA33, so I sent it to STKA34 May 11, 2025 at 7:42 PM, Lee Junghan(이정한)_CS : We'll analyze why. Does AGV#3 work normally now? May 11, 2025 at 7:44 PM, adambenczik : Yes May 11, 2025 at 7:44 PM, Lee Junghan(이정한)_CS : Ok good May 11, 2025 at 7:56 PM, KIM SEYEON [김세연]_FA : @류종석(RyuJongSeok) @서지원 we checked and the reason was ios sensor sticker was blocked by tape that operators use. please share the information not to touch ips sensor sticker area at all May 11, 2025 at 7:59 PM, 배병민 (Bae Byoungmin) : Please install the bobbin in Ca 1Line R/W#2. There is no operator. May 11, 2025 at 8:02 PM, Szeitz Flórián : Sziasztok! Katód Slitt 2 ismét megállt a R/W leszedő kar. Légyszives nézétek meg. Köszönöm May 11, 2025 at 8:14 PM, Hakim/Ivancsa FA : Cathode agv can't offload the cathode It's showing manufacture detect abnormal time over May 11, 2025 at 8:14 PM, Hakim/Ivancsa FA : E0STKC34 May 11, 2025 at 8:27 PM, KIM SEYEON [김세연]_FA : @adambenczik please check roll agv at e0stkc34 May 11, 2025 at 8:30 PM, adambenczik : I'm working on it May 11, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : thanks May 11, 2025 at 8:44 PM, gutenkunstabelzoltan : Katod slitt 2nel nem mozdul a transzfergep pedog nincs hibaban szerintem egy adat nem stimmel: Tray id transfer to eq ltc0661 Tray id eq to mes ltc0374 Nem tudom átírni…. May 11, 2025 at 8:59 PM, (Unknown) : Anód Slitteekre nem jönnek az üres tálcák.FA értesitve May 11, 2025 at 9:00 PM, gutenkunstabelzoltan : Daruk jok, cv jok ahogy latom May 11, 2025 at 9:01 PM, VK (mcs) : @FA Please check Anode Reel STK A52 port 2(6084)(6083) It is in manual mode. Thx May 11, 2025 at 9:07 PM, Hakim/Ivancsa FA : Stkc34-tr-mcp Here one agv is not taking the cathode and also the machine is stuck in the mid way May 11, 2025 at 9:07 PM, Hakim/Ivancsa FA : The error is It occurred during agv pio interface May 11, 2025 at 9:09 PM, Hakim/Ivancsa FA : @adambenczik can you come and check May 11, 2025 at 9:15 PM, Hakim/Ivancsa FA : It's Been stuck for several minutes can Anyone give a solution May 11, 2025 at 9:15 PM, adambenczik : I'm too busy at cathode Slitt 2, sorry May 11, 2025 at 9:15 PM, adambenczik : I'll come as soon as I can May 11, 2025 at 9:16 PM, Hakim/Ivancsa FA : Oh ok ok thank you May 11, 2025 at 9:22 PM, adambenczik : I told my colleague to come and help May 11, 2025 at 9:23 PM, Hakim/Ivancsa FA : Oh okay and also the anode site That you were working The agv number 3 again having problem May 11, 2025 at 9:27 PM, adambenczik : I'll send it to a STKA34 again, thank you May 11, 2025 at 9:28 PM, Hakim/Ivancsa FA : Okay thank you May 11, 2025 at 9:30 PM, Szeitz Flórián : Anód slitt re nem érkeznek a tálcàk. Légyszives nézzétek meg. Köszönöm May 11, 2025 at 9:32 PM, VK (mcs) : There was an issue in STK A52. It has been solved and carriers are moving. May 11, 2025 at 9:33 PM, Szeitz Flórián : Katód Slitt 2 ismét csak egy oldalrol visszi el a reel-t a robot!!. May 11, 2025 at 9:37 PM, adambenczik : Photo May 11, 2025 at 9:37 PM, adambenczik : Jelezve lett, ennél többet nem tudunk vele kezdeni May 11, 2025 at 10:05 PM, Powder tréner : This message was deleted. May 11, 2025 at 10:48 PM, Hakim/Ivancsa FA : Number 3 agv again going through the same problem Need to change the route of it May 11, 2025 at 10:49 PM, Hakim/Ivancsa FA : @adambenczik can you check May 11, 2025 at 10:50 PM, adambenczik : We will solve the problem, and take AGV#3 out of manufacturing May 11, 2025 at 10:54 PM, adambenczik : @Szeitz Flórián bocsi, nem tudod hogy előző műszakban használták e a katód Slitt 2-t? May 11, 2025 at 10:54 PM, Szeitz Flórián : Persze hogy ment és nalunk is . May 11, 2025 at 10:54 PM, gutenkunstabelzoltan : . May 11, 2025 at 10:54 PM, adambenczik : Köszi May 11, 2025 at 10:55 PM, Hakim/Ivancsa FA : Thanks the problem is solved May 11, 2025 at 10:59 PM, Hakim/Ivancsa FA : Agv3 has some problem not even working after Changing the destination May 11, 2025 at 11:03 PM, adambenczik : We will shot it down. It will not work today May 11, 2025 at 11:04 PM, Hakim/Ivancsa FA : @gutenkunstabelzoltan is working on it Let's see if it's showing problem again May 11, 2025 at 11:05 PM, gutenkunstabelzoltan : I will put it aside and turn it off becouse its just makeing problems May 11, 2025 at 11:16 PM, adambenczik : Coating AGV#3-t kivettük a termelésből! May 12, 2025 at 12:16 AM May 12, 2025 at 12:16 AM, VK (mcs) : @FA Please check Foil STK E0STK001 SCP main power CP trip. May 12, 2025 at 12:21 AM, gutenkunstabelzoltan : Done May 12, 2025 at 12:26 AM, KIM SEYEON [김세연]_FA : @Dear slitter SL Due to CA slitter #2 down, do you operate slitter #4? Is there any reel production impact tonight? May 12, 2025 at 12:32 AM, Szeitz Flórián : Katód Slitt 5 -ös gèp termel a Slitt 2 helyett May 12, 2025 at 12:44 AM, Hakim/Ivancsa FA : the E1CTA020 Its stopped Showing Auto start position abnormal May 12, 2025 at 12:44 AM, Hakim/Ivancsa FA : @adambenczik @gutenkunstabelzoltan Please check May 12, 2025 at 12:45 AM, KIM SEYEON [김세연]_FA : @FA technicians please check immediately 🙏 May 12, 2025 at 12:55 AM, 김태현 : @FA cathode 1 stopped again, please hurry up. May 12, 2025 at 12:56 AM, 김태현 : The tongs don't bite. May 12, 2025 at 1:20 AM, Karina Lyzanets : Sziasztok Gyertek légyszíves a Slitt Cathode 5 re Lift problem May 12, 2025 at 1:20 AM, Karina Lyzanets : Köszönöm May 12, 2025 at 1:27 AM, Sárvári Márk : FA segítséget kérnénk az Anod raktárban. May 12, 2025 at 1:34 AM, Szeitz Flórián : Anód Slitt 2 re nem érkezik az anyag. Légyszives nézzétek meg . Köszönöm May 12, 2025 at 1:36 AM, Szeitz Flórián : Már látom úton van .... May 12, 2025 at 1:52 AM, cehmannzsoltcehmann : @VK (mcs) pls check E1SLA020 not coming material May 12, 2025 at 1:54 AM, VK (mcs) : There is no available material May 12, 2025 at 3:14 AM, Powder tréner : Sziasztok szeretnék kérni segítséget powder katodon a 2AGV elakadt (nekiment lépcsőnek).S.O.S May 12, 2025 at 3:40 AM, Hakim/Ivancsa FA : The E0STKC34-TR-MCP is trying to offload the cathode but it can't Can someone check May 12, 2025 at 3:45 AM, Oleksii Krasnoshchok : Hello in anode press 2 problem u/w transfer stopped May 12, 2025 at 3:50 AM, adambenczik : Solved May 12, 2025 at 3:59 AM, Balogh Ádám : Sziasztok ezt megtudnátok nezni mert igy egyik sort sem tudjuk tölteni es meg fogunk állni, az elakadt AGV blokkolja a többit is May 12, 2025 at 4:11 AM, Balogh Ádám : Esetleg valaki ? May 12, 2025 at 4:12 AM, gutenkunstabelzoltan : Par perc es odaerek May 12, 2025 at 4:12 AM, Balogh Ádám : Oké May 12, 2025 at 4:26 AM, gutenkunstabelzoltan : Kesz May 12, 2025 at 4:32 AM, Balogh Ádám : Köszi May 12, 2025 at 5:13 AM, Szeitz Flórián : This message was deleted. May 12, 2025 at 5:13 AM, Szeitz Flórián : Köszönöm May 12, 2025 at 5:13 AM, Szeitz Flórián : Katód Slitt 1 re gyertek légyszives. Leszedő kar miközben a reel talcàra tette volna a Reel-t a reel core-ba elakadt a tálca May 12, 2025 at 5:23 AM, Karina Lyzanets : Slitter Cathode 5 re gyertek valaki kérlek szépen May 12, 2025 at 5:23 AM, Karina Lyzanets : Köszönöm May 12, 2025 at 5:28 AM, Hakim/Ivancsa FA : EOSTK31 here agv is not working And agv number 1 Both in cathode site not working May 12, 2025 at 5:31 AM, adambenczik : This message was deleted. May 12, 2025 at 5:31 AM, adambenczik : Nem tudunk, ezt csináljuk May 12, 2025 at 5:31 AM, adambenczik : We can't come help May 12, 2025 at 5:38 AM, adambenczik : Kész May 12, 2025 at 5:39 AM, Szeitz Flórián : De miért nem volt jó a kar pozíció May 12, 2025 at 5:39 AM, Szeitz Flórián : ?? May 12, 2025 at 5:40 AM, adambenczik : Passz May 12, 2025 at 5:40 AM, adambenczik : Kész May 12, 2025 at 5:58 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Iváncsa "C" shift (06:00-18:00) 12 Tech, 0 SL Beteg(sick): 1 Sarvajz Ferenc Szabadság(Holisay): 1, Farkas Tamás(SL) Helyettesít(Substitution): 2, Szücs Géza Imre(SL), Boromisza Zoltán Túlóra(Overtime): 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Csuti Zoli Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Haraszt May 12, 2025 at 6:13 AM, Yanina : This message was deleted. May 12, 2025 at 6:13 AM, Yanina : Sziasztok Cathode slitt 2 transzfer probléma R/W May 12, 2025 at 6:16 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.12 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 12, 2025 at 6:17 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 2호기 IPS ALIGN RANGE OVER 알람 발생중입니다. 전 일 새벽부터 조치가 안되고있는데 확인 해주실수있을까요? @Baek Hojong(백호종)FA May 12, 2025 at 6:17 AM, Yanina : Sziasztok Cathode slitt 5 tálcák nem jutnak el a rendeltetési helyükre May 12, 2025 at 6:17 AM, duzzaman Md (MCS) : @FA Please check E0CNVA51_8181 Servo motor Alaram occured. Thank you! May 12, 2025 at 6:19 AM, Viczai Tamás : Megyünk May 12, 2025 at 6:20 AM, Skwarek Tibor : Theres an ips sensor error, we called koreaian help. Transfer not working, now in maintanence mode. May 12, 2025 at 6:21 AM, duzzaman Md (MCS) : Thank you for your information. Have a great day ahead. May 12, 2025 at 6:22 AM, Skwarek Tibor : Thank you! May 12, 2025 at 7:07 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVC51_8181 IPS Sensor reading fails This error is existing for a while. Please take care of it. Thank you May 12, 2025 at 7:07 AM, Czél Tamás : Sziasztok Kérlek nézzetek rá hogy Anód slitt 1-re miért nem jön az anyag. Köszönöm May 12, 2025 at 7:09 AM, duzzaman Md (MCS) : Unfortunately there's no search lot. No materials available. Thanks May 12, 2025 at 7:49 AM, Yanina : Anód slitt 2 nincs AGV 45p. May 12, 2025 at 7:50 AM, Skwarek Tibor : Nézzük May 12, 2025 at 7:50 AM, Skwarek Tibor : Most érkezik May 12, 2025 at 7:52 AM, duzzaman Md (MCS) : Yes, AGV 24 is going. Thank you May 12, 2025 at 7:58 AM, duzzaman Md (MCS) : Just reminding, its been OOS since 6:37 Thank you May 12, 2025 at 7:59 AM, Skwarek Tibor : Waiting for koreaian help May 12, 2025 at 8:00 AM, duzzaman Md (MCS) : Thank you for your information. Kindly check E0STKC35_C01 MCP Control power CP trip Thank you May 12, 2025 at 8:01 AM, Skwarek Tibor : Checking May 12, 2025 at 8:01 AM, Yanina : Köszönöm szépen May 12, 2025 at 8:04 AM, Skwarek Tibor : Done May 12, 2025 at 8:04 AM, Skwarek Tibor : Szívesen May 12, 2025 at 8:06 AM, duzzaman Md (MCS) : Kindly check E0STKA11, Crane 01 There's MCP Control power CP trip for a while . Nagyon köszönöm. May 12, 2025 at 8:12 AM, Szücs Géza FT-B : @Simon Attila F. A. @Skwarek Tibor Tartok egy kis szünetet, Coater CA#1 P03-ról hozunk most csak anyagot, monitorozzátok légyszi amíg nem leszek. köszönöm szépen May 12, 2025 at 8:47 AM, 김건희 : @KIM SEYEON [김세연]_FA PM님 양극 슬리터2호기 언제 조치될까요 현장에 아무도 없네요 ㅠㅠ May 12, 2025 at 8:48 AM, Baek Hojong(백호종)FA : 업체랑 같이 점검요청 미리했습니다 피엠님 늦어져 죄송합니다 May 12, 2025 at 8:58 AM, Yanina : Anód slitt 1 nincs AGV 23' May 12, 2025 at 9:00 AM, duzzaman Md (MCS) : Regrettably, no materials available. May 12, 2025 at 9:11 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA31 & E0STKA11 Both Cranes are OOS. MCP Control power cp trip Thank you! May 12, 2025 at 9:13 AM, FACS_오창훈_CHANGHOON : @Szücs Géza FT-B E1STKA31 Ankle Sensor Problem May 12, 2025 at 9:29 AM, 서지원 : 금일 양극 코팅 1,2호기/음극 코팅 1호기 생산예정입니다. 양극 코팅 2호기도 저희 연속 생산 시작되면 AGV 사용 가능할지 문의드립니다. May 12, 2025 at 9:29 AM, Sazzad Bhai SKon : @FA E0STKA51 crane is inactive for 12 minutes May 12, 2025 at 9:30 AM, Skwarek Tibor : Checking May 12, 2025 at 9:36 AM, Skwarek Tibor : No errors May 12, 2025 at 9:42 AM, 김대호 (Kim Dae Ho) : Cathode press 8 U/W Please check it out. May 12, 2025 at 9:43 AM, Yanina : Anód slitt 3 nincs AGV 35' kérjük, nézze meg May 12, 2025 at 9:44 AM, Marsi Gábor : Már úton May 12, 2025 at 9:44 AM, Sazzad Bhai SKon : Last LR was at 9.10, job completed at 9.39 May 12, 2025 at 9:46 AM, 김대호 (Kim Dae Ho) : Sorry ! Please check the robot! May 12, 2025 at 9:46 AM, 김대호 (Kim Dae Ho) : @fa May 12, 2025 at 9:47 AM, 김대호 (Kim Dae Ho) : Cathode press 8 이재기가 롤 뜬 상태로 멈춰있습니다. May 12, 2025 at 9:49 AM, duzzaman Md (MCS) : STKA 11 , still same error persists. STKA 12, MCP CONTROL POWER CP TRIP error, too. Please check. Thank you May 12, 2025 at 9:50 AM, Szücs Géza FT-B : Írtammár a másik csoportba, hogy megyek.... de az nekünk 15-20 perc gyalog, csak oda! May 12, 2025 at 9:53 AM, duzzaman Md (MCS) : It's indeed in the last corner. Thank you for your support. May 12, 2025 at 10:02 AM, FACS_오창훈_CHANGHOON : 조치 되었습니다 May 12, 2025 at 10:04 AM, 김대호 (Kim Dae Ho) : 감사합니다. 1롤 더 받아보겠습니다. May 12, 2025 at 10:10 AM, Szücs Géza FT-B : STK001 solved May 12, 2025 at 10:57 AM, 장영환(Younghwan Chang) : Geri, do you have report of last week? @이게리 May 12, 2025 at 11:05 AM, Skwarek Tibor : IPS sensor error agan May 12, 2025 at 11:06 AM, duzzaman Md (MCS) : Yes, since last 3 minutes. Please take care of it. May 12, 2025 at 11:07 AM, Skwarek Tibor : We need help. Tecnicians repaired but the error still come up. May 12, 2025 at 11:07 AM, duzzaman Md (MCS) : Also STK A11 & A12, Both Cranes are in error state for a while. Kindly check. May 12, 2025 at 11:08 AM, duzzaman Md (MCS) : Indeed, it happened again. Thank you for your information and efforts. May 12, 2025 at 11:12 AM, Yanina : Anód slitt nincs Rell tálcàk May 12, 2025 at 11:13 AM, Viczai Tamás : Jönnek, csak lassan! May 12, 2025 at 11:15 AM, duzzaman Md (MCS) : There are plenty of jobs for the crane. Thus, the process is a bit slow. May 12, 2025 at 11:16 AM, Yanina : Köszönöm May 12, 2025 at 11:34 AM, 김대호 (Kim Dae Ho) : Cathode sliter 2 Please check the location of the tray. @fa May 12, 2025 at 11:40 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 2호기 트레이 위치를 확인해주세요 설비 계속 비가동되니 조치될때까지 몇 릴 모니터링좀 부탁드립니다. May 12, 2025 at 12:07 PM, 배일명 : 양극1라인 이재기 테크니션 와주세요 agv 잘못 롤이안착되어 이재기 원점 잡아야합니다 May 12, 2025 at 12:09 PM, 서지원 : @FA @KIM SEYEON [김세연]_FA 해당 내용 확인 가능하실까요?? 양극 1라인 코터는 멈추면 안되는 상황입니다…. May 12, 2025 at 12:13 PM, KIM SEYEON [김세연]_FA : CS인원이 지금 출발했습니다. May 12, 2025 at 12:13 PM, 배일명 : 감사합니다 May 12, 2025 at 12:18 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B FA technicians go to coater line 1 and check. May 12, 2025 at 12:19 PM, Simon Attila F. A. : I'm here on ca ct01 May 12, 2025 at 12:19 PM, KIM SEYEON [김세연]_FA : 👍 May 12, 2025 at 1:29 PM, Simon Attila F. A. : @duzzaman Md (MCS) please RBC2089 from E0STKC35_P01 port, becausee this port empty. May 12, 2025 at 1:33 PM, duzzaman Md (MCS) : Done. Thank you May 12, 2025 at 1:35 PM, 김건희 invited 김철홍(🇰🇷대한민국). May 12, 2025 at 1:36 PM, 김건희 : 팀장님 전극 FA 톡방입니다 May 12, 2025 at 1:37 PM, Simon Attila F. A. : Thank you too May 12, 2025 at 2:12 PM, Fahim/ivancsa : Cathod rollar storage 3 Agv -14 creating problem @fa May 12, 2025 at 2:13 PM, Simon Attila F. A. : I coming... May 12, 2025 at 2:22 PM, FACS_JaewonShin : 슬리터 양극 2호기 바이패스기능 화면내 숨겨져 있어 PLC접속하여 공트레이 투입 하였습니다. 현장에서 투입오류 있는지 점검하겠습니다. May 12, 2025 at 2:53 PM, 서지원 : 양극 코팅 AGV 사용가능한지 확인 부탁드립니다. May 12, 2025 at 2:54 PM, Baek Hojong(백호종)FA : 양극 코팅 2호기 AGV 사용가능합니다 현장 모니터링 하겠습니다 May 12, 2025 at 2:55 PM, 서지원 : 넵 감사합니다! May 12, 2025 at 4:56 PM, Yanina : Cathode slitt 5 nem jó transzfer R/W 2 May 12, 2025 at 4:56 PM, Skwarek Tibor : Megyünk May 12, 2025 at 4:57 PM, 김대호 (Kim Dae Ho) : 현재 조치가 된건가요? May 12, 2025 at 4:58 PM, FACS_JaewonShin : 현재 정상 기동중이나 프로그램 변경은 안되었습니다. 배출중 알람 발생시 bypass기능 켜야 다음 기동시 정상 기동합니다. May 12, 2025 at 5:33 PM, 김대호 (Kim Dae Ho) : 그럼 지금 bypass기능이 켜져 있는건가요? May 12, 2025 at 5:35 PM, FACS_JaewonShin : 아닙니다. 정상 시퀀스에서는 볼수없는 화면이고 자재 입고시 켜지는 비트입니다 배출시 자동으로 꺼집니다 May 12, 2025 at 5:39 PM, 김대호 (Kim Dae Ho) : 네 백호종 pm님께 연락받았고, 재발생시 요청드리도록 하겠습니다. May 12, 2025 at 5:46 PM, 김건희 : @KIM SEYEON [김세연]_FA @연해리 양극 프래스 3,4호기 u/w 에 롤이 안 오고 있습니다. RTD에서도 조회가능하고 작업지시서도 문제 없고 반제품 검사도 완료했는데 반송가능 lot에서는 조회가 안 됩니다 ㅠ May 12, 2025 at 5:48 PM, 김철홍(🇰🇷대한민국) : 조립에서 603F 양극 Reel 부족하기 전에 (곧..) 프레스/슬리팅 해야하는데요.... May 12, 2025 at 5:53 PM, KIM SEYEON [김세연]_FA : 확인 해보겠습니다. May 12, 2025 at 5:56 PM, KIM SEYEON [김세연]_FA : 전화드리겠습니다 May 12, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 +2 Overtime Overtime (2):Csanálosi Gábor, Denkó János Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 12, 2025 at 6:05 PM, Lee Junghan(이정한)_CS : @MCS Please check LR May 12, 2025 at 6:05 PM, KIM SEYEON [김세연]_FA : 자재 이제 갈겁니다 May 12, 2025 at 6:06 PM, VK (mcs) : LR received for both and materials released. May 12, 2025 at 6:07 PM, Lee Junghan(이정한)_CS : Thanks May 12, 2025 at 6:08 PM, KIM SEYEON [김세연]_FA : 프레스3호기로는 AGV 13호기가 롤창고서 자재들고 갈거고 4호기로는 AGV 9호기가 롤창고서 자재들고 갈겁니다. May 12, 2025 at 6:09 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 12 Time: 18:00~06:00 1. Jeong Woo-jun May 12, 2025 at 6:09 PM, 김건희 : 감사합니다 May 12, 2025 at 6:09 PM, 김건희 : 원인이 무었이였나요? ㅠ May 12, 2025 at 6:14 PM, Lee Junghan(이정한)_CS : LR 올릴때는 노 서치 랏이였는데 그 뒤에 상위에서 반송을 안 내려줬습니다 May 12, 2025 at 6:16 PM, Lee Junghan(이정한)_CS : 그후 시간이 지난후에 가능한 lot이 생겨서 가능해졌습니다. May 12, 2025 at 6:18 PM, Lee Junghan(이정한)_CS : 원래는 자재가 생기면 반송이 내려와야 되는데 그게 안 되서 LR을 다시 올려서 반송 처리되었습니다 May 12, 2025 at 7:07 PM, Semenszki Péter : Sziasztok! A fólia raktár rosszul lett bezárva újra tudnátok indítani? May 12, 2025 at 7:19 PM, 이주봉PM LEE JUBONG(FA) : This message was deleted. May 12, 2025 at 7:28 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 1-2 nincs AGV 20 perc May 12, 2025 at 7:28 PM, Karina Lyzanets : Kérlek nézzetek meg, köszi May 12, 2025 at 7:31 PM, Csanálosi Gábor FA : @VK (mcs) check it pls May 12, 2025 at 7:32 PM, VK (mcs) : Checking May 12, 2025 at 7:34 PM, VK (mcs) : For 1st slitter no available material 2nd slitter: material is on AGV 7 and on it is the way May 12, 2025 at 7:49 PM, Farkas Dániel Elekt : Sziasztok folia raktarhoz kernek segitseget Kiallt hibara a daru May 12, 2025 at 7:54 PM, Oláh András : Megoldva 👍 May 12, 2025 at 9:00 PM, Oláh András : @Karina Lyzanets RBA2492? May 12, 2025 at 9:06 PM, Hári Zoltàn : Katod 1 -1 es rw agv problema itt volt egy kulfoldi de ugy elment h9gy a problema meg fennall! May 12, 2025 at 9:08 PM, Oláh András : Megyünk May 12, 2025 at 9:09 PM, VK (mcs) : @FA Please check Anode Roll STK A31 Area sensor detect error! May 12, 2025 at 9:10 PM, Karina Lyzanets : Igen Nagyon szépen köszönöm a segítséget May 12, 2025 at 9:38 PM, Hamza/Ivancsa FA : Anode roll storage A31 shows error. Please check May 12, 2025 at 9:43 PM, Yena Valerii : Hello please come to anode press 2 May 12, 2025 at 9:45 PM, Karina Lyzanets : Sziasztok Az Slitt Anode 3 AGV robot nem hozza az anyagot May 12, 2025 at 9:45 PM, Karina Lyzanets : Kérlek nézzetek meg May 12, 2025 at 9:45 PM, Karina Lyzanets : Köszi May 12, 2025 at 9:46 PM, Karina Lyzanets : 25 perc May 12, 2025 at 9:52 PM, Oláh András : Már úton az Agv #15 May 12, 2025 at 9:53 PM, Hamza/Ivancsa FA : Transfer error at cathode roll storage 3. Agv 2 May 12, 2025 at 9:53 PM, Oláh András : Comin May 12, 2025 at 10:00 PM, Csicskovics Balázs : Cathode press 3-4 nem hozza az AGV az anyagot. Nézzétek meg May 12, 2025 at 10:00 PM, Csicskovics Balázs : Köszönöm May 12, 2025 at 10:01 PM, Oláh András : Rajta vagyuni May 12, 2025 at 10:01 PM, Oláh András : K May 12, 2025 at 10:09 PM, Oláh András : Press4-re megy a 21es agv May 12, 2025 at 10:14 PM, Oláh András invited MUGDHO/Ivansca FA. May 12, 2025 at 10:43 PM, Hári Zoltàn : Katatod 1 coater 1-es rw ugyan az a prpblema mint az elobb! Gyertek legyszi! May 12, 2025 at 10:43 PM, Hári Zoltàn : Ami katód 2 May 12, 2025 at 11:35 PM, Csicskovics Balázs : Anode slitt 3-ra 20 perce nem érkezik AGV. Nézzétek meg kérlek. Köszönöm May 12, 2025 at 11:37 PM, Szabadi Miki : @VK (mcs) please check this , thank you. May 12, 2025 at 11:38 PM, VK (mcs) : No available material May 12, 2025 at 11:51 PM, Yena Valerii : Hello please come to anode press 1 May 12, 2025 at 11:56 PM, Szabadi Miki : Done May 13, 2025 at 12:11 AM May 13, 2025 at 12:11 AM, Hári Zoltàn : Ismét May 13, 2025 at 12:12 AM, Hári Zoltàn : Kat 2: 1-es rw May 13, 2025 at 12:13 AM, Szabadi Miki : Megyünk May 13, 2025 at 1:24 AM, Yena Valerii : Hello please come to anode press 2 May 13, 2025 at 1:24 AM, Oláh András : Comin May 13, 2025 at 1:25 AM, Yena Valerii : its done, sorry May 13, 2025 at 1:34 AM, Hári Zoltàn : Katod 1 coater egyes rw gyertek legyszi! May 13, 2025 at 1:34 AM, Oláh András : Jövünk May 13, 2025 at 1:57 AM, Hamza/Ivancsa FA : AGV 22 at Anode roll storage 3 has transfer issue. Please check May 13, 2025 at 1:58 AM, Szabadi Miki : Comin May 13, 2025 at 2:11 AM, Hári Zoltàn : Ugyan az a helyzet megint, bement az opi és nem tudjuk visszakapcsolni a dolgokat! Gyertek legyszi aztán mire ideértek megjavul! (stunned)(hopeful) May 13, 2025 at 2:12 AM, Szabadi Miki : Megyünk May 13, 2025 at 2:14 AM, Karina Lyzanets : Slitt Cathode 1 re gyertek légyszíves May 13, 2025 at 2:14 AM, Karina Lyzanets : This message was deleted. May 13, 2025 at 2:14 AM, Karina Lyzanets : Köszi May 13, 2025 at 2:15 AM, Szabadi Miki : Megyünk May 13, 2025 at 2:43 AM, 조혜근 : @FA Can you remove AGV 21 in the RW of cathode press unit 2? I'm going to take it out manually May 13, 2025 at 2:46 AM, Farkas Dániel Elekt : Kat coatingra gyetrek kerlek egy robi szorakozik May 13, 2025 at 2:46 AM, Farkas Dániel Elekt : Mar jo May 13, 2025 at 2:46 AM, Farkas Dániel Elekt : Nem kell jonni May 13, 2025 at 2:47 AM, Szabadi Miki : Na jo nem megyünk 😀 May 13, 2025 at 3:07 AM, Hári Zoltàn : Ismét (annoyed)(stunned) May 13, 2025 at 3:08 AM, Hári Zoltàn : Épp nem termel a spr úgyhogy nem életbevágó. May 13, 2025 at 3:12 AM, Dániel Hufnágel : Pillanat és ott vagyunk May 13, 2025 at 3:49 AM, Hári Zoltàn : @Dániel Hufnágel légszives a katód 2 1es rewindernél tapasztalható problémát add tovább a programozóknak mert folyamatosan jelentkezik a probléma. Jelen pillanatban is jelentkezett... köszönöm! May 13, 2025 at 3:53 AM, Dániel Hufnágel : Igen, koreaiak is tudnak már róla.... May 13, 2025 at 3:54 AM, Hári Zoltàn : Szuper, köszi! May 13, 2025 at 4:52 AM, Somoskövy Martin : Sziasztok. Cathode Press 4-en a robotkar nem teszi fel az U/W-re az anyagot. Megnéznétek? Köszönöm. May 13, 2025 at 6:07 AM, Muneeb Ur Rehman left this chatroom. May 13, 2025 at 6:12 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.13 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 13, 2025 at 6:14 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.13 FA Iváncsa "C" shift (06:00-18:00) 14 Tech, 1 SL Beteg(sick): 1, Sarvajz Ferenc Szabadság(Holisay): 2, Farkas Tamás(SL), Fabriczius Gergely Helyettesít(Substitution): 2, Böröcz Tamás, Pálosi Róbert, Szücs Géza Imre(SL) Túlóra(Overtime): 1, Édl Tamás --- Electrode (5) --- Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Pálosi Róbert --- Assembly 1F(3) --- Csuti Zoli Gégény Dávid Böröcz Tamás ---Assembly GF(3) --- Kertész Dániel Lajos Gábor Nagy Tamás --- May 13, 2025 at 6:41 AM, Czél Tamás : Sziasztok Nézzétek utána kérlek hogy miért nem jön anyag Catode Ford slittekre. MES szerint kell még anyagnak lennie. Köszönöm May 13, 2025 at 6:50 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD after filtering there is no suitable material available for Cathode Ford slitter. May 13, 2025 at 6:51 AM, Shahbaz 샤바즈 MCS/RTD : Slitter Rolls available: Slitter line 1,2 • Anode: 00 • Cathode: 00 Slitter line 3 • Anode: 00 • Cathode: 00 May 13, 2025 at 8:04 AM, FACS_JaewonShin : ■ 13th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 13, 2025 at 8:26 AM, Szücs Géza FT-B : @K.Krisz Coating AN Coating fog ma termelni? ha igen melyik sorok? May 13, 2025 at 8:38 AM, K.Krisz Coating : Majd a 4-es, kb 2 órát. Az 1-es majd este,ha minden igaz. May 13, 2025 at 8:45 AM, Szücs Géza FT-B : mikor indul tervek szerint? May 13, 2025 at 8:47 AM, K.Krisz Coating : Passz May 13, 2025 at 9:06 AM, Szücs Géza FT-B : AN#4 AGVvel menne? mert akkor az útvonalról el kell pakolni May 13, 2025 at 9:09 AM, K.Krisz Coating : Szerintem nem,mivel csak teszt lesz. May 13, 2025 at 9:15 AM, 김희용 : @김건희 Slitter 1000m 권취 생산시간 확인되면 공유부탁드립니다! May 13, 2025 at 9:20 AM, Shahbaz 샤바즈 MCS/RTD : Press Roll available quantity: Press line 1,2 • Anode: 147 • Cathode: 16 Press line 3,4 • Anode: 56 • Cathode: 01 May 13, 2025 at 9:28 AM, 김건희 : 금일 10시에 하고자 합니다 May 13, 2025 at 9:43 AM, 김희용 : 옙 10시에 생산하시고 Tray 아이디만 공유부탁드립니다. 바로 모니터링 하겠습니다. May 13, 2025 at 10:18 AM, 김건희 : LTC 1854/ 0120입니다 곧 이송 시작 합니다 May 13, 2025 at 10:18 AM, 김건희 : 양극 슬리터 2호기에서 생산입니다 May 13, 2025 at 10:25 AM, 김희용 : 생산되서 나오는거 확인했고 모니터링 하겠습니다 May 13, 2025 at 10:30 AM, FACS_JaewonShin : Cathode / Anode coater area AGV Waiting point Cathode Node 4 Node 7 Node 9 Node 12 Node 15 Node 17 Node 19 Node 22 Node 29 Anode Node 159 Node 122 Node 120 Node 118 Node 116 Node 113 Node 110 Node 104 May 13, 2025 at 12:04 PM, Oláh Rajmund invited Bks.Gabor. May 13, 2025 at 12:05 PM, Oláh Rajmund invited Irinyi László. May 13, 2025 at 1:48 PM, 장정훈 : @FA @김건희 Cathode Slitter production loss is expected due to the delay in bringing in the empty tray. Please check! May 13, 2025 at 1:50 PM, Baek Hojong(백호종)FA : 확인해드리겠습니다 May 13, 2025 at 2:13 PM, Baek Hojong(백호종)FA : @장정훈 조장님 창고내 정상반송중이나 공트레이가 창고 안쪽에 몰려있는지라 반송이 더디네요 참고하시기 바랍니다 May 13, 2025 at 2:58 PM, Czél Tamás : Sziasztok Katód Slitt 5-re tud vki jönni pls? A robot nemrakja fel a Jumbót a turetra. Köszönöm May 13, 2025 at 2:58 PM, Skwarek Tibor : Megyünk May 13, 2025 at 4:16 PM, FACS_오창훈_CHANGHOON : @Szücs Géza FT-B E0STKA32 Data_off Sensor_on problem May 13, 2025 at 4:17 PM, Skwarek Tibor : Checking May 13, 2025 at 4:24 PM, Skwarek Tibor : Done May 13, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (0):- Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 13, 2025 at 6:08 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 13 Time: 18:00~06:00 1. Jeong Woo-jun May 13, 2025 at 6:10 PM, Hamza/Ivancsa FA : Night Shift 13 May 18:00-6:90 1. Fahim Ajmil 2. Hamza May 13, 2025 at 6:22 PM, Yena Valerii : Hello, please come to anode press 3 May 13, 2025 at 6:26 PM, Szabadi Miki : Comin May 13, 2025 at 6:28 PM, Jun(정우준)_SKOH FA : @manufacture 금일 야간에 프레스 7호기 사용하나요?? AGV 티칭 점검하려고 합니다. May 13, 2025 at 6:34 PM, Jun(정우준)_SKOH FA : @Yena Valerii May 13, 2025 at 6:38 PM, 조혜근 : 양극 프레스 7호기는 사용합니다 May 13, 2025 at 6:40 PM, Jun(정우준)_SKOH FA : 확인감사합니다. May 13, 2025 at 6:44 PM, Yena Valerii : today is unlikely, perhaps it is worth talking to the shift leader about it May 13, 2025 at 6:49 PM, Fahim/ivancsa : @fa There is a problem in agv 7 kathode pressing area May 13, 2025 at 6:53 PM, Yena Valerii : anode or cathode? May 13, 2025 at 6:57 PM, Jun(정우준)_SKOH FA : Cathode side. but I already checked it. thank you!! May 13, 2025 at 6:59 PM, Yena Valerii : yes at first i thought you meant the anode side because i asked for help with the anode side. your welcome May 13, 2025 at 8:03 PM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVC51_08_141 and 134 there is INV-02 Runtime over error and it is blocking materials recovery. Thank you very much! May 13, 2025 at 8:07 PM, Szabadi Miki : Solved May 13, 2025 at 8:07 PM, Mohammad Amir : Thank you very much! May 13, 2025 at 8:22 PM, 김대호 (Kim Dae Ho) invited 임동현 and 지찬우. May 13, 2025 at 8:25 PM, Szabadi Miki : Very welcome May 13, 2025 at 8:51 PM, Turianytsia Olesia : kérlek gyere cathode slitt 4 May 13, 2025 at 8:52 PM, Turianytsia Olesia : A szállítószalag nem működik. May 13, 2025 at 8:54 PM, Csicskovics Balázs : Cathode press 1 gyertek légyszíves R/w nem visziel a Rollt köszönöm May 13, 2025 at 9:11 PM, Hári Zoltàn : Sziasztok! Érdeklődni szeretnék hogy a katód 1 coater 2-es RW-n mikor lesz használható az agv? Vagy már az? May 13, 2025 at 9:40 PM, Farkas Dániel Elekt : Sziasztok Katod2 coating 2es rw nem vitte ela robot a jumbot inkabb tolteni ment Jon helyette masik ebbe az esetbe vagy ilyenkor mi van? May 13, 2025 at 9:40 PM, Dániel Hufnágel : Nézem itt vagyok May 13, 2025 at 9:41 PM, Dániel Hufnágel : 17 es számú uton May 13, 2025 at 9:41 PM, Farkas Dániel Elekt : Koszi May 13, 2025 at 9:53 PM, Turianytsia Olesia : kérlek gyere anode slitt 1 May 13, 2025 at 9:54 PM, Turianytsia Olesia : megragadt May 13, 2025 at 9:56 PM, Dániel Hufnágel : Kész May 13, 2025 at 10:55 PM, Yena Valerii : Hello, please come to anode press 2 May 13, 2025 at 10:56 PM, Szabadi Miki : Comin May 13, 2025 at 10:59 PM, Szabadi Miki : Solved May 13, 2025 at 11:13 PM, Yena Valerii : Hello, please come to anode press 2 May 14, 2025 at 12:50 AM May 14, 2025 at 12:50 AM, Hamza/Ivancsa FA : Load collapse error at Anode roll storage 3 STK A33 May 14, 2025 at 1:03 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0STKA33_C01 there is Load Collapse Error (Right) job for Slitter -2 is getting delayed. Thank you very much! May 14, 2025 at 1:05 AM, Oláh András : Im on it May 14, 2025 at 1:05 AM, Mohammad Amir : Error -Forl#1 Driver error* May 14, 2025 at 1:05 AM, Mohammad Amir : Thank you very much! May 14, 2025 at 1:09 AM, Oláh András : Solved 👍 May 14, 2025 at 1:14 AM, 조혜근 : Rolls are not coming to the UW of cathode slitter unit 3. Please check it May 14, 2025 at 1:14 AM, Mohammad Amir : Checking May 14, 2025 at 1:16 AM, Mohammad Amir : @Szabadi Miki Please check E0STK032_port 4017 there is In reserve On error from SCS side that is why job for Slitter -3 is not progressing. Carrier -RBC2528. Thank you very much! May 14, 2025 at 1:17 AM, Oláh András : Im on it May 14, 2025 at 1:20 AM, Oláh András : It was stuck "input mode". Agv soon bring the roll to slitt 👍 May 14, 2025 at 1:23 AM, Mohammad Amir : @조혜근 AGV#9 on the way to slitter cathode -3✅ Thank you very much! May 14, 2025 at 1:24 AM, 조혜근 : Thank you👍 May 14, 2025 at 1:25 AM, Mohammad Amir : You are welcome! May 14, 2025 at 1:25 AM, Mohammad Amir : Thank you very much! May 14, 2025 at 3:02 AM, Fahim/ivancsa : @concern, Cathode roll storage 1 has ips failure several times. Need help May 14, 2025 at 4:08 AM, Fahim/ivancsa : Cathode roll storage 1 has ips failure several times. Need help May 14, 2025 at 5:51 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.14 "B" műszak, 8+1/12+1 Tech, 1Sl Overtime(0): Holiday(3): Csanálosi Gábor, Takács Ádám, Kovács Ágnes Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Böröcz Tamás, Rácz Dániel --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- Support: 방혁_이반차 (Bang Hyuk) May 14, 2025 at 6:38 AM, Szücs Géza FT-B : Coater Roll AGV CA#2-t elküldtem STKC33-ba May 14, 2025 at 6:39 AM, Szücs Géza FT-B : AGV CA#11 már régóta rossz, TR-el manuálisan vegyétek le róla a Rollt May 14, 2025 at 6:40 AM, Czeilinger Krisztián : Rendben van. May 14, 2025 at 6:44 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1 Do you have any available materials? May 14, 2025 at 6:44 AM, Szücs Géza FT-B : This message was deleted. May 14, 2025 at 6:46 AM, duzzaman Md (MCS) : SL CA: 03 SL AN: 00 May 14, 2025 at 6:48 AM, Szarka Adrián : Sziasztok Anod Press 3 uw robot nem működik May 14, 2025 at 6:48 AM, Szarka Adrián : Abnormal pozíció error May 14, 2025 at 6:48 AM, duzzaman Md (MCS) : For SL CA 01 machine, no materials available May 14, 2025 at 6:54 AM, Szarka Adrián : Haho jön valaki ? May 14, 2025 at 6:58 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián egyikőtök coater CA részt és STKC33-35 figyelje, másikótok menjen a slittre May 14, 2025 at 6:58 AM, Szarka Adrián : Anod Slitt 3 meg állt a robot csak az egyik reelt tette fel a tálcára a másikat csak ra tolta és ott maradt a robot May 14, 2025 at 6:59 AM, Czeilinger Krisztián : Rendben van. May 14, 2025 at 7:00 AM, Czeilinger Krisztián : Megyek. May 14, 2025 at 7:00 AM, Szarka Adrián : Először a Press re gyere anod Press 3 mert mindjárt le áll a gep és ha áll utána sok a beállítási selejt May 14, 2025 at 7:00 AM, Czeilinger Krisztián : Nemsokára megyünk. May 14, 2025 at 7:00 AM, Szarka Adrián : Robotot vissza kell állítani alap állásba szerintem az a baja May 14, 2025 at 7:01 AM, Szücs Géza FT-B : egyikőtök most menjen oda kérlek May 14, 2025 at 7:02 AM, Czeilinger Krisztián : Megyek. May 14, 2025 at 7:03 AM, Szücs Géza FT-B : @Pálosi Róbert STKC32 TR-t indítsd el autoba légyszives, beírtam az adatokat May 14, 2025 at 7:17 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 The materials that can still be returned Is there none? May 14, 2025 at 7:17 AM, Nagy Dávid 4 : Anod slitt 2 tálca rosszul helyen állt meg help help help köszönöm szépen May 14, 2025 at 7:18 AM, Szücs Géza FT-B : megyek May 14, 2025 at 7:20 AM, duzzaman Md (MCS) : Yes, no Lot at the moment. Thank you. May 14, 2025 at 7:22 AM, Szarka Adrián : Anod Press 2 uw robot servo probléma. Gyertek kerlek May 14, 2025 at 7:22 AM, duzzaman Md (MCS) : For 1 & 2: 00 3: 03 4:10 5: 00 May 14, 2025 at 7:22 AM, Czeilinger Krisztián : Megyek May 14, 2025 at 7:24 AM, 김대호 (Kim Dae Ho) : Photo May 14, 2025 at 7:25 AM, 김대호 (Kim Dae Ho) : Would you like to check this? @duzzaman Md (MCS) May 14, 2025 at 7:25 AM, duzzaman Md (MCS) : Checking May 14, 2025 at 7:41 AM, duzzaman Md (MCS) : For Cathode Slit 1, E1SLC010 machine, the last load request was sent yesterday, 13th May 22:03 and there was no search lot. For Cathode Slit 2, E1SLC020 machine, the last load request was sent earlier today , 14th May 02:24 and there was no search lot as well. As we see in the available lot, there are 36 available but it is getting filtered and becoming 0 in 'WHAT_NEXT_FILTER_SLITTTER_STK' For this rules, carrier state should be 'Stored' but in the search lot it shows 'Active'. May 14, 2025 at 7:55 AM, Anton Mashchenko : Hello, anode press 3, AGV error, location U/W! Help! May 14, 2025 at 7:57 AM, Czeilinger Krisztián : Rendben,megyek. May 14, 2025 at 7:58 AM, Nagy Dávid 4 : Anod press 1,2 problem r/w agv help help köszönöm szépen May 14, 2025 at 8:03 AM, Czeilinger Krisztián : Pill és megyek May 14, 2025 at 8:33 AM, 지찬우 : Anode press 3 U/W robot stop Please check May 14, 2025 at 8:36 AM, Szarka Adrián : Robot PROBLEM U/W ... Anod press 3 May 14, 2025 at 8:37 AM, Czeilinger Krisztián : Megyek. May 14, 2025 at 8:49 AM, Czeilinger Krisztián : Solved. May 14, 2025 at 8:51 AM, 김대호 (Kim Dae Ho) : Did you solve the problem? Is it a temporary measure? May 14, 2025 at 8:57 AM, 지찬우 : After restoring the location, I switched to auto mode, but the same problem occurred May 14, 2025 at 8:57 AM, 지찬우 : Please come back again May 14, 2025 at 9:04 AM, 김대호 (Kim Dae Ho) : 음극 프레스 2호기, 3호기 u/w측 점검 부탁드립니다. May 14, 2025 at 9:15 AM, Rácz Dániel / FA : @Erik Gerzsenyi @Szarka Adrián @Nagy Dávid 4 Az Anód konvejer azért áll, mert tűzjelzőt ellenőriznek. May 14, 2025 at 9:16 AM, Szarka Adrián : Köszi a jelzést és meddig fog állni May 14, 2025 at 9:16 AM, Szarka Adrián : ? May 14, 2025 at 9:16 AM, Szarka Adrián : @김대호 (Kim Dae Ho) @김건희 May 14, 2025 at 9:16 AM, Rácz Dániel / FA : Maximum egy 5 perc még May 14, 2025 at 9:19 AM, Viktoriia Hleba : anod slitt 2 nince talca May 14, 2025 at 9:19 AM, Rácz Dániel / FA : @Erik Gerzsenyi @Szarka Adrián @Nagy Dávid 4 Az Anód konvejer azért áll, mert tűzjelzőt ellenőriznek. May 14, 2025 at 9:20 AM, Rácz Dániel / FA : Konvejer visszaindítva, nem sokára lesz. May 14, 2025 at 9:32 AM, Anton Mashchenko : Pls, come to cathode press 7, U/W buffer problem! Thanks! May 14, 2025 at 9:46 AM, Szarka Adrián : Anod Slitt 1 gépen nem jó a konvejor May 14, 2025 at 9:47 AM, Szarka Adrián : 2 reel talca köze be került plusz 1 May 14, 2025 at 9:47 AM, Szarka Adrián : Tud valaki jönni megnézni ? May 14, 2025 at 9:47 AM, Szarka Adrián : Köszi May 14, 2025 at 9:48 AM, Czeilinger Krisztián : Megyek May 14, 2025 at 9:58 AM, Szücs Géza FT-B : erről kérek szépen fényképet @Czeilinger Krisztián köszönöm May 14, 2025 at 9:59 AM, 주범진 : @fa팀 안녕하세요 포일창고에 있는 공보빈들 테스트용으로 사용 중이신가요? 창고 자리가 넉넉하지 않아서 테스트 끝나셨으면 정리하려고 합니다 May 14, 2025 at 10:04 AM, Szarka Adrián : anod slitt 2 nince AGV May 14, 2025 at 10:04 AM, Nagy Dávid 4 : 17 perce help help köszönöm szépen May 14, 2025 at 10:08 AM, Szücs Géza FT-B : látok rá 5db Rollt, CS-es kollégák cserélik a Roll raktárak ajtajain a törött zsanérokat. ezért késések várhatóak mind 2 oldalon May 14, 2025 at 10:10 AM, Szarka Adrián : Köszi. De ezt máskor jelezzék már előre mert erre fel tudtunk volna készülni és nem állni a gep 15-20 perce. May 14, 2025 at 10:11 AM, Szarka Adrián : Mert ezt már múltkor is eljátszották hogy szó nélkül le szedtek az összes ajtót May 14, 2025 at 10:12 AM, Szücs Géza FT-B : jelezném ha tudnák róla.... most 9:00 környékén szembesültem vele én is, mert segítséget kértek, mert lacdapták az egész darun az áramot May 14, 2025 at 10:13 AM, Szarka Adrián : Úgy értettem hogy ők neked te meg nekünk ☺️☺️☺️ May 14, 2025 at 10:24 AM, Szappanos Gábor : Hali. Coatung katód 2 nél összementek az agv-k May 14, 2025 at 10:25 AM, Czeilinger Krisztián : Megyek. May 14, 2025 at 10:36 AM, duzzaman Md (MCS) : @FA PORT PLC DISCONNECTED FOR STKC 31,32,33 PLEASE CHECK, THANK YOU May 14, 2025 at 10:41 AM, Szarka Adrián : nincs tálca anód slitt 3-nál May 14, 2025 at 10:46 AM, duzzaman Md (MCS) : There are plenty of jobs. It's a bit slow but it will be there eventually. It's because too many job is there for the crane. May 14, 2025 at 10:46 AM, Szücs Géza FT-B : i cant see problems May 14, 2025 at 10:47 AM, duzzaman Md (MCS) : It got sorted. Now, STKC 34_M01 DATA OFF, SENSOR ON OVERTIME ERROR THANK YOU May 14, 2025 at 10:48 AM, Szücs Géza FT-B : manufacturing use tha manual ports. May 14, 2025 at 10:50 AM, Szarka Adrián : Anod press 2 u/w robot problem szervo hiba ismét May 14, 2025 at 10:50 AM, Szarka Adrián : Itt van valaki nézi de szerintem csak ki lesz nyomva a hiba és megy tovább May 14, 2025 at 10:50 AM, Szarka Adrián : Ki nyomta a hibát és el ment. May 14, 2025 at 10:51 AM, Viktoriia Hleba : anod slitt 2 nince talca May 14, 2025 at 10:51 AM, FACS_오창훈_CHANGHOON : Solved May 14, 2025 at 10:53 AM, duzzaman Md (MCS) : There are plenty of jobs. It's a bit slow but it will be there eventually. It's because too many job is there for the crane. Some carriers would be reaching soon. May 14, 2025 at 10:56 AM, Szücs Géza FT-B : ennyitől?? köszönöm szépen May 14, 2025 at 10:56 AM, Szarka Adrián : A koreai ment el. Csak az a baj ettől a szervo hiba nem javul meg és hétvége óta van. May 14, 2025 at 10:56 AM, Szarka Adrián : Javítani se ártana May 14, 2025 at 11:02 AM, Pálosi Róbert : A tálcák lassan érkeznek de a gépek nincsenek hibában. May 14, 2025 at 11:08 AM, Sazzad Bhai SKon : Due to different vendor, currently empty trays will come only from STK 52. So, tray supply might get delayed. May 14, 2025 at 11:08 AM, Szücs Géza FT-B : nézem May 14, 2025 at 11:19 AM, Szarka Adrián : @Szücs Géza FT-B meg tudod nézni mennyi üres reel talca van anod reel raktárban ? Köszönöm May 14, 2025 at 11:21 AM, Szarka Adrián : Anod Slitt nincs üres reel talca May 14, 2025 at 11:23 AM, Szücs Géza FT-B : nézem 🫡 May 14, 2025 at 11:26 AM, Szücs Géza FT-B : 255, plusz az a kevés, ami a CVn mozog May 14, 2025 at 11:30 AM, Szarka Adrián : Köszönöm May 14, 2025 at 11:43 AM, Szarka Adrián : U/w robot problem anod press 2 May 14, 2025 at 11:44 AM, Szarka Adrián : @김대호 (Kim Dae Ho) May 14, 2025 at 11:47 AM, 김대호 (Kim Dae Ho) : 음극 프레스 2호기 u/w 서보 알람이 지속 발생중입니다. 현지분들은 임시 조치만 대응중이라서, 한국 인력 조치 필요합니다. @김건희 @FACS_오창훈_CHANGHOON May 14, 2025 at 11:47 AM, Rácz Dániel / FA : @czeilinger Robi May 14, 2025 at 11:48 AM, Czeilinger Krisztián : Megyünk. May 14, 2025 at 11:55 AM, Viktoriia Hleba : 2 slitter cathode nincs AGV - 40 perc May 14, 2025 at 11:56 AM, Szücs Géza FT-B : ez van még? May 14, 2025 at 11:59 AM, Szarka Adrián : Ment oda egy koreai Kollega de hogy meg csinálta e nem tudom May 14, 2025 at 12:03 PM, Szücs Géza FT-B : k May 14, 2025 at 12:05 PM, Szücs Géza FT-B : PR A2 UW A oldal, betölthető? May 14, 2025 at 12:08 PM, Szarka Adrián : AGV R/W probléma a press anode 3 May 14, 2025 at 12:13 PM, KIM SEYEON [김세연]_FA : @김건희 @서지원 피엠님 전극 창고에 에러가 많이 발생하여 하기 일정에 간단한 점검을 하고 싶습니다. 하기 일정이 혹시 문제되면 알려주십시오 금일 13시~13시반 Roll anode #33 금일 13시반~14시 Foil #001 감사합니다. May 14, 2025 at 12:14 PM, KIM SEYEON [김세연]_FA : 네 확인하겠습니다. May 14, 2025 at 12:14 PM, Rácz Dániel / FA : @kazamata please May 14, 2025 at 12:14 PM, KIM SEYEON [김세연]_FA : PNT가 필요한건가요? 아님 FA가 필요한건가요? May 14, 2025 at 12:16 PM, 김대호 (Kim Dae Ho) : 안녕하세요 pm님! 방혁 PM님 만나서 내용 전달하였습니다! May 14, 2025 at 12:31 PM, 김건희 : 음극 롤 창고 3호기인가요? May 14, 2025 at 12:35 PM, KIM SEYEON [김세연]_FA : 네 May 14, 2025 at 12:46 PM, Erik Gerzsenyi : Nezzetek meg legyszives hogy katod press 7-8-ra miert nem jonnek az agv-k May 14, 2025 at 12:46 PM, Erik Gerzsenyi : Koszonom May 14, 2025 at 12:48 PM, Czeilinger Krisztián : Hello. Orderbe még nincs benne a Kat.7-8 May 14, 2025 at 12:51 PM, Erik Gerzsenyi : Az erdekes mert 30 perce megkertuk May 14, 2025 at 12:59 PM, Szücs Géza FT-B : @mcs please May 14, 2025 at 1:01 PM, Böröcz Tamás : 9es AGV fogja vinni a 8asra ha a 2esnek sikerül kivenni Press 7re van anyag az RTD szerint szóval az MCSnek kell írni May 14, 2025 at 1:01 PM, Rácz Dániel / FA : @mcs please May 14, 2025 at 1:02 PM, Czeilinger Krisztián : Kész. Mennek az anyagok. May 14, 2025 at 1:02 PM, Szücs Géza FT-B : RTDvel kért ki maguknak anyagot a termelés. Meg van hogy konkrétan melyik 4 Roll kell nekik May 14, 2025 at 1:03 PM, Czeilinger Krisztián : This message was deleted. May 14, 2025 at 1:03 PM, Szücs Géza FT-B : @kazetta pls May 14, 2025 at 1:05 PM, 김건희 : 넵 알겠습니다 May 14, 2025 at 1:09 PM, Rácz Dániel / FA : @kazamaták May 14, 2025 at 1:10 PM, duzzaman Md (MCS) : For CA PR 7, VC 09 is on the way For CA PR 8, , VC 02 is assigned. However , E0STKC31, P01 IS OOS May 14, 2025 at 1:26 PM, duzzaman Md (MCS) : @FA Please check Foil STK E0STK001 SCP main power CP trip. May 14, 2025 at 1:27 PM, Erik Gerzsenyi : We requested two rolls for press 8 33 minutes ago but they still havent arrived. May 14, 2025 at 1:29 PM, Sazzad Bhai SKon : Vehicle 21 on the way. There was alarm on the port May 14, 2025 at 1:29 PM, duzzaman Md (MCS) : Cathode press 7, there is active job. Please check the STKC33 P01 is OOS. May 14, 2025 at 1:30 PM, Erik Gerzsenyi : Now good? May 14, 2025 at 1:33 PM, duzzaman Md (MCS) : Agv 21, just arrived at CA PR 8 and depositing May 14, 2025 at 1:33 PM, duzzaman Md (MCS) : No, the ports are OOS May 14, 2025 at 1:38 PM, duzzaman Md (MCS) : @SCS Kindly check EOSTK33_P01/P01_BP01 its oos and delaying job severely. Thanks May 14, 2025 at 1:54 PM, Boromisza Zoltán : This message was deleted. May 14, 2025 at 2:40 PM, Szücs Géza FT-B : Where need to go RBC0131???? May 14, 2025 at 2:40 PM, Szücs Géza FT-B : @duzzaman Md (MCS) May 14, 2025 at 2:41 PM, Szücs Géza FT-B : @Erik Gerzsenyi RBC0131-et ti kértétek valahova????? May 14, 2025 at 2:42 PM, Erik Gerzsenyi : Melyik gépre? May 14, 2025 at 2:43 PM, duzzaman Md (MCS) : The destination is E1PRC080_P01 It has been altered.sharing more information soon. May 14, 2025 at 2:43 PM, Szücs Géza FT-B : ez a kérdésem..... azért ál a raktár, mert megszünt egy feladat... May 14, 2025 at 2:43 PM, Szücs Géza FT-B : thanks May 14, 2025 at 2:43 PM, Szücs Géza FT-B : RBC0131 mehet most a Press CA#8-ra @Erik Gerzsenyi ? May 14, 2025 at 2:44 PM, Szücs Géza FT-B : jaaaah May 14, 2025 at 2:45 PM, Szücs Géza FT-B : Erik, nagyon sok dolgot kértetek ki egyszerre ezért ezek a feladatok lefoglalnak 1 AGV-t és egy STK-t May 14, 2025 at 2:45 PM, Erik Gerzsenyi : Azert kertunk ki mert 1 ora utan sikerult ideernie az elso jumbonak May 14, 2025 at 2:47 PM, Erik Gerzsenyi : Ez nem kell nekunk May 14, 2025 at 2:47 PM, Erik Gerzsenyi : Nem mi kertuk ki az tuti May 14, 2025 at 2:48 PM, Szücs Géza FT-B : akkor megy viddza May 14, 2025 at 2:48 PM, Erik Gerzsenyi : @Szücs Géza FT-B azt megtudod nezni legyszi, hogy press 7-8-ra melyik CarrierID-k jonnek még? May 14, 2025 at 2:50 PM, Szücs Géza FT-B : meg tudom, de nem gyorsan, az MCS gyorsabban megadja a választ May 14, 2025 at 2:50 PM, duzzaman Md (MCS) : It became NA in our system. If you could update me the current location, I'd be able to send it to it's destination. Or else, you can do it by yourself as well. If you need further assistance with this carrier. Please let us know. May 14, 2025 at 2:53 PM, Sazzad Bhai SKon : @Szücs Géza FT-B there are jobs for press CA 7/8 line. Checking the delay cause May 14, 2025 at 2:56 PM, duzzaman Md (MCS) : There are 17 materials available for these lines. Some of the LOT ID's are__ EC4M073F42029 EC4M073F4202A EC4M073F46017 EC4M073F46024 EC4M073F4602Q Thank you May 14, 2025 at 2:57 PM, Sazzad Bhai SKon : @SCS RBC1503 has a job, SCS replied HCACK 0. But transfer is not initiated for a long time. Please check the STK May 14, 2025 at 2:59 PM, Sazzad Bhai SKon : Crane E0STKC33_C01 is idle for a long time May 14, 2025 at 3:07 PM, Erik Gerzsenyi : Thank you May 14, 2025 at 3:22 PM, Pálosi Róbert : Under repair May 14, 2025 at 3:25 PM, Nagy Dávid 4 : anod slitt 2 nince talca help help help köszönöm szépen May 14, 2025 at 3:26 PM, Szücs Géza FT-B : sry im on assy May 14, 2025 at 3:27 PM, Sazzad Bhai SKon : There are enough trays on the CNV. May 14, 2025 at 3:36 PM, 김대호 (Kim Dae Ho) : Cathode slitter 5 Can you put AGV 21 back in the warehouse and order it? @Sazzad Bhai SKon May 14, 2025 at 3:37 PM, duzzaman Md (MCS) : Doing it May 14, 2025 at 3:38 PM, Szücs Géza FT-B : küldtem ki plussz tálcákat az STKA51ből May 14, 2025 at 3:42 PM, duzzaman Md (MCS) : Created the transfer. AGV was in error state right after that. LD/UD STEP TIME OUT. AND TRANSFER IS PAUSED NOW. PLEASE CHECK IT PHYSICALLY May 14, 2025 at 3:45 PM, 김대호 (Kim Dae Ho) : Done! May 14, 2025 at 3:46 PM, duzzaman Md (MCS) : Also please delete the previous job for RBC0170 from ACS. We've deleted it from MCS/RTD May 14, 2025 at 3:49 PM, 김대호 (Kim Dae Ho) : I don't have acs authority. May 14, 2025 at 3:50 PM, Sazzad Bhai SKon : @FA @Manufacturing Please do not create manual jobs for trays at E0CNVA51_P07 May 14, 2025 at 3:50 PM, duzzaman Md (MCS) : Regrettably, we are unable to access ACS, too. @ACS Please check May 14, 2025 at 3:51 PM, Szücs Géza FT-B : @Czeilinger Krisztián ACS-ben legyszives töröld azt a feladatot, ami az RBV0170 Carriert szállítaná. Kösszi May 14, 2025 at 3:51 PM, Szücs Géza FT-B : Mr @ACS sosem járt a termelésben, dolgozni még nem láttuk :) May 14, 2025 at 3:52 PM, Szücs Géza FT-B : Photo May 14, 2025 at 3:52 PM, Sazzad Bhai SKon : Same for cathode side, few jobs have been created manually for E0CNVC51_P07 May 14, 2025 at 3:53 PM, Szücs Géza FT-B : Photo May 14, 2025 at 3:53 PM, Szücs Géza FT-B : Photo May 14, 2025 at 3:54 PM, Szücs Géza FT-B : Photo May 14, 2025 at 3:54 PM, Szücs Géza FT-B : Photo May 14, 2025 at 3:57 PM, Szücs Géza FT-B : These requests are constantly coming to us. If the slitter does not receive an empty tray, production will stop. NC will not receive Reel. We will not then manually request empty trays. However, MCS will then respond to the production request. May 14, 2025 at 4:05 PM, Sazzad Bhai SKon : In that case please request MCS for job priority. Because jobs are being constantly created. Thank you May 14, 2025 at 4:08 PM, Nagy Dávid 4 : Anod press 2 r/w AGV no good! May 14, 2025 at 4:08 PM, Szücs Géza FT-B : @Erik Gerzsenyi @Viktoriia Hleba @Nagy Dávid 4 @Szarka Adrián a tálcahiányt az MCS-nek jelezzétek a továbbiakban. Köszönjük szépen May 14, 2025 at 4:08 PM, Nagy Dávid 4 : Help help köszönöm szépen May 14, 2025 at 4:11 PM, Sazzad Bhai SKon : Please raise LR again May 14, 2025 at 4:15 PM, 김건희 : @연해리 @방혁 PM(Bang.Hyuk) FA @KIM SEYEON [김세연]_FA RBC1526 RBC1512 RBC1504 RBC1503 RBC1492 RBC1486 RBC1482 RBC1467 해당 롤 조립 명일 런엔레이트 때문에 급히 생산 해야하나 지금 양극 롤창고3호기 에러때문에 계속 롤이 안 오고 있습니다 중간 물류 이용해서라도 양극 7,8호기에 명령 생성 가능하실까요? May 14, 2025 at 4:22 PM, duzzaman Md (MCS) : @FA Kindly check E0CNVC51_08_031 Inv-03 error This error is existing for a while. Please take care of it. Thank you May 14, 2025 at 4:23 PM, duzzaman Md (MCS) : Also E0STKC32_P01 IPS Sensor reading fails. Jobs are being delayed. Thank you May 14, 2025 at 4:39 PM, 김대호 (Kim Dae Ho) : Should I leave it like this? Agv will discharge May 14, 2025 at 4:39 PM, Sazzad Bhai SKon : Please send back to the StK May 14, 2025 at 4:46 PM, Nagy Dávid 4 : Cathod press 2 nincs agv 25perce help help köszönöm szépen May 14, 2025 at 4:48 PM, Szücs Géza FT-B : @Sazzad Bhai SKon please check where will going the material. Thank You very much. May 14, 2025 at 4:49 PM, Sazzad Bhai SKon : It's on AgV 09. Transferring May 14, 2025 at 4:51 PM, Rácz Dániel / FA : LTC0956 LTC1690 LTC0625 May 14, 2025 at 5:21 PM, Nagy Dávid 4 : Anod press 1 agv r/w error help help köszönöm szépen May 14, 2025 at 5:23 PM, Sazzad Bhai SKon : UR received from r/w. Job created but AGV 25 was in alarm: pivot not allowed May 14, 2025 at 5:27 PM, Sazzad Bhai SKon : AGV 25 unassigned due to alarm. AGV 17 assigned now. But same error: pivot not allowed. @acs please check this May 14, 2025 at 5:28 PM, Szücs Géza FT-B : technicians going May 14, 2025 at 5:53 PM, FACS_오창훈_CHANGHOON : E0STKC32 port interface err check please May 14, 2025 at 5:59 PM, adambenczik : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician 0 SL ———————————— Electrode (2): Benczik Ádám Gutenkunst Ábel Zoltán ———————————— Assembly(5): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 14, 2025 at 6:09 PM, Mohammad Amir : @FA @adambenczik Please check E0STKC32_C01 there is Port interface Error. Thank you very much! May 14, 2025 at 6:29 PM, adambenczik : Solved May 14, 2025 at 6:35 PM, Mohammad Amir : Could you please check again issue has occurred again. Few jobs are pending. Thank you very much! May 14, 2025 at 6:36 PM, adambenczik : Sorry, I misunderstood May 14, 2025 at 6:38 PM, adambenczik : It's solved now May 14, 2025 at 6:38 PM, Mohammad Amir : Köszönom szepen! May 14, 2025 at 6:39 PM, Mohammad Amir : @adambenczik Please check E0STKC11_C01 there is Load Collapse error. Thank you very much! May 14, 2025 at 6:54 PM, Szeitz Flórián : Sziasztok! Katód press 2 re ès Slitt 2re n nem érkezik az anyag légyszives nézzétek meg . Köszönöm May 14, 2025 at 6:55 PM, Mohammad Amir : Checking May 14, 2025 at 6:56 PM, Mohammad Amir : Could you please press LR again for Press -Ca. There was an issue that's why materials did not arrive. Ia m checking slitter -2. Thank you very much! May 14, 2025 at 6:57 PM, KIM SEYEON [김세연]_FA : @김건희 피엠님 17시경 조치 완료되었습니다. May 14, 2025 at 6:57 PM, Mohammad Amir : For Slitter cathode -2 we don't have materials unfortunately as soon as materials will be available jobs will be created as there is already an active LR. Thank you very much! May 14, 2025 at 7:01 PM, Powder tréner : Sziasztok poron anod oldalon a raktár nem adja ki E1PLA021-P01 portra az anyagot. Nézzétek rá. May 14, 2025 at 7:02 PM, Mohammad Amir : Good evening, Currently we don't have materials unfortunately, as soon as materials will be available jobs will be created as there is already an active LR. Thank you very much! May 14, 2025 at 7:04 PM, Powder tréner : Thanks May 14, 2025 at 7:06 PM, 김건희 : 감사합니다 May 14, 2025 at 7:07 PM, Mohammad Amir : You are welcome! May 14, 2025 at 7:07 PM, adambenczik : Solved May 14, 2025 at 7:08 PM, Szeitz Flórián : Sziasztok! Anód slitten nemegy a Conveyor May 14, 2025 at 7:08 PM, Szeitz Flórián : Nem megy * May 14, 2025 at 7:08 PM, Mohammad Amir : Thank you very much! May 14, 2025 at 7:13 PM, adambenczik : Megyünk May 14, 2025 at 7:21 PM, adambenczik : @Szeitz Flórián ki tölti be az üres tálcákat? Ki dönti el hogy melyik kerül be a termelésbe és melyik nem? May 14, 2025 at 7:26 PM, Szeitz Flórián : Hogy mi ???? May 14, 2025 at 7:28 PM, adambenczik : Akkor máshogy mondom. Van egy hibás tálca, ami el van látva jelzéssel hogy hibás, mégis valaki vissza teszi a termelésbe May 14, 2025 at 7:29 PM, Szeitz Flórián : Na ezzek nem mi voltunk ,így nem tudok neked választ adni erre. May 14, 2025 at 7:31 PM, adambenczik : Azt próbálom kideríteni, hogy kit keressek ezügyben. Most a raktárban van a tálca, szóval gondolom innentől az Assy dolga May 14, 2025 at 7:39 PM, Szeitz Flórián : LR megadva de semmi nem jön May 14, 2025 at 7:39 PM, Mohammad Amir : Checking May 14, 2025 at 7:42 PM, Mohammad Amir : Please press again ,we didn't receive LR. Thank you very much! May 14, 2025 at 7:48 PM, (Unknown) : Katód slitt 3. -as mögött a 13-as AGV pozíciót vesztett.megnéznétek?köszi May 14, 2025 at 7:48 PM, Vászon Márton : Katód pressz 3 rewinder leszedés megállt. Nézzétek meg légyszíves May 14, 2025 at 7:49 PM, adambenczik : Megyünk May 14, 2025 at 7:49 PM, Fahim/ivancsa : Cathod pressing 07 Agv have unload error May 14, 2025 at 7:49 PM, Fahim/ivancsa : Please check May 14, 2025 at 7:51 PM, gutenkunstabelzoltan : Kesz May 14, 2025 at 7:51 PM, Fahim/ivancsa : We solved it twice with different AGVs. Still the problem persists May 14, 2025 at 7:55 PM, gutenkunstabelzoltan : The transfer won’t pick it up until there is no room for it to put down May 14, 2025 at 7:57 PM, Fahim/ivancsa : Ok thank you for letting me know May 14, 2025 at 8:00 PM, Szeitz Flórián : LR. 3. Alkalommal is benyomva újra. May 14, 2025 at 8:00 PM, Mohammad Amir : Checking May 14, 2025 at 8:01 PM, Mohammad Amir : Unfortunately even now ,we did not receive that LR has been pressed. Could you try pressing one more time. Thank you very much! May 14, 2025 at 8:05 PM, adambenczik : Now? May 14, 2025 at 8:07 PM, adambenczik : I see the Request, but I see no order May 14, 2025 at 8:09 PM, Mohammad Amir : For E1PRC020_P01, We did not receive LR in recent time ,last LR was received at 17:03. That job was terminated by Operator at 17:55 that's why Materials did not arrive. Afterwards there is no new LR received received that's why now materials are not arriving for E1PRC020_P01. Thank you very much! May 14, 2025 at 8:13 PM, adambenczik : Operator machine shows Load Request 13 minutes ago May 14, 2025 at 8:13 PM, adambenczik : I requestet again May 14, 2025 at 8:14 PM, Mohammad Amir : Could you please confirm me it is the same machine E1PRC020_P01? Thank you very much! May 14, 2025 at 8:15 PM, adambenczik : Yes May 14, 2025 at 8:16 PM, Mohammad Amir : I am really sorry to inform you that still we didn't receive any LR from the mentioned machine. Last LR was at 17:03. Thank you very much! May 14, 2025 at 8:18 PM, adambenczik : Is there anyone we can inform about the problem? It is not F.A. nor operator territory May 14, 2025 at 8:21 PM, Mohammad Amir : I will suggest you to get in touch with Korean PM working tonight. Meanwhile I am monitoring this machine. Thank you very much! May 14, 2025 at 8:22 PM, Szeitz Flórián : Anód press 4 megállt az UW leszedő robot May 14, 2025 at 8:27 PM, gutenkunstabelzoltan : Kesz May 14, 2025 at 8:28 PM, Hamza/Ivancsa FA : Kind reminder: Cathode Press 7 has unloding error. Tried to solve but in vain. Please check @FA. May 14, 2025 at 8:29 PM, adambenczik : There is no space for the transfer to unload the Roll. We have to wait for operators to remove the bobin May 14, 2025 at 8:30 PM, adambenczik : Jeleztük a problémát May 14, 2025 at 8:45 PM, Mohammad Amir : @adambenczik @Szeitz Flórián for you information, We have received LR successfully now carrier RBC2741 is on its way to Press Cathode -2. Thank you very much! May 14, 2025 at 8:46 PM, 이주봉PM LEE JUBONG(FA) : Solved May 14, 2025 at 9:24 PM, adambenczik : AGV#21 most jön a raktárba, aztán hozza az anyagot press 2-re May 14, 2025 at 9:24 PM, adambenczik : Remélhetőleg nem tér vissza ugyan ez a baj May 14, 2025 at 9:35 PM, Oleksii Krasnoshchok : Hello in anode press 7 problem u/w transfer stopped May 14, 2025 at 9:50 PM, Mohammad Amir : @adambenczik Please check E0CNVA51_06_151/152 there is Data Loss Error. It is blocking materials delivery. Thank you very much! May 14, 2025 at 9:57 PM, (Unknown) : Katód slitt 3 robot probléma.megnéznétek?köszi May 14, 2025 at 9:58 PM, Szeitz Flórián : Sziasztok! Anód slitt 2-3 között megállt a Conveyor. Nem mennek a reelek May 14, 2025 at 9:59 PM, Mohammad Amir : @FA @gutenkunstabelzoltan Please check this error it still exists and it has blocked the materials transfer. Thank you very much! May 14, 2025 at 9:59 PM, Hamza/Ivancsa FA : @FA pleae check cathode slit 050. AGV has stepout timer. Tried but couldnt solve May 14, 2025 at 10:01 PM, 조혜근 : Can you put the one in AGV No. 9 in the UW of cathode slitter No. 5 back into the warehouse? May 14, 2025 at 10:01 PM, 조혜근 : We won't work on this May 14, 2025 at 10:04 PM, Szeitz Flórián : press 7 : Nagy gond van. Beállt egy AGV anyaggal úgy hogy a Buffer -en is volt màr egy . Load requset lett nyomva ès az AGV -ről vennè le a Roll-t de kiállt hibára. Gyertek légyszives . Köszönöm May 14, 2025 at 10:04 PM, Szeitz Flórián : Anód press 7* May 14, 2025 at 10:05 PM, Szeitz Flórián : Most itt van két roll D e egyiket se tudjuk használni. May 14, 2025 at 10:13 PM, Szeitz Flórián : Anód press 2: 2. Alkalommal áll meg a a robot az U/W előtt. May 14, 2025 at 10:15 PM, adambenczik : Solved May 14, 2025 at 10:15 PM, 조혜근 : Thank you May 14, 2025 at 10:16 PM, Mohammad Amir : @FA @adambenczik Please check one job is pending because E1CTC010_P01 is OOS. Is there no production at E1CTC010? Thank you very much! May 14, 2025 at 10:16 PM, Szeitz Flórián : An. Press 7. Ezt màr vègkèpp nem èrtem , AGV kiáll a Roll-al együtt a portrol ès most meg beáll egy üres AGV. 😥 May 14, 2025 at 10:25 PM, adambenczik : Kész, elvileg nem fog mégegyszer kiállni May 14, 2025 at 10:26 PM, Szeitz Flórián : Köszi May 14, 2025 at 10:26 PM, Szeitz Flórián : Akkor most press 7 javítás May 14, 2025 at 10:29 PM, adambenczik : Right now, there is no production May 14, 2025 at 10:32 PM, Mohammad Amir : In this case ,should I cacel the job. As carrier is already inside the STK001 ,so there will be no issue. Thank you very much! May 14, 2025 at 10:38 PM, gutenkunstabelzoltan : Anoda press tr07 claps not worink at all!! Cant move it in manual and it wont move in auto mode either…. May 14, 2025 at 10:38 PM, (Unknown) : Katód slitt 3 robot probléma.megnéznétek?köszi May 14, 2025 at 10:44 PM, gutenkunstabelzoltan : Kesz May 14, 2025 at 11:22 PM, Szeitz Flórián : Anód press 7 U/W. May 14, 2025 at 11:22 PM, Szeitz Flórián : AgV bent àllnde robot nem indul meg a leszedessel. May 14, 2025 at 11:30 PM, gutenkunstabelzoltan : Nem mukodik a clamp egyaltalan de mostmar semmit nem akar csinalni automataban!!! May 15, 2025 at 12:17 AM May 15, 2025 at 12:17 AM, adambenczik : @Mohammad Amiris there no material for E1SLC010 and E1SLC020? May 15, 2025 at 12:18 AM, Mohammad Amir : Checking May 15, 2025 at 12:19 AM, Mohammad Amir : Unfortunately still there is no materials available for Slitter Cathode 1&2. Thank you very much! May 15, 2025 at 12:19 AM, adambenczik : Okey, thank you May 15, 2025 at 12:19 AM, Mohammad Amir : You are welcome! May 15, 2025 at 12:32 AM, gutenkunstabelzoltan : @Mohammad Amir can u pls delete an order for me? They not useing the agv becouse the transfer not working so can u pla remove the order with RBA2225 at press7anode? May 15, 2025 at 12:32 AM, gutenkunstabelzoltan : And than i eill send the material back May 15, 2025 at 12:32 AM, gutenkunstabelzoltan : Will* May 15, 2025 at 12:32 AM, Mohammad Amir : Checking May 15, 2025 at 12:32 AM, gutenkunstabelzoltan : ty! May 15, 2025 at 12:38 AM, Mohammad Amir : This message was deleted. May 15, 2025 at 12:39 AM, Mohammad Amir : I cancelled the job from MCS side however ,As I see it still exists in ACS side. @ACS could you please cancel job for RBA2225 from ACS as well. @gutenkunstabelzoltan Please send the carrier RBA2225 on AGV#11 back after cancellation from ACS side. Thank you very much! May 15, 2025 at 12:40 AM, gutenkunstabelzoltan : Done! Ty!! May 15, 2025 at 12:40 AM, Mohammad Amir : You are welcome! May 15, 2025 at 1:29 AM, adambenczik : Mit történik katód Slitt 7-el? Nincs hová pakoljon a transzfer, de 2 AGV áll sorban anyaggal May 15, 2025 at 1:29 AM, adambenczik : Press* May 15, 2025 at 2:20 AM, Mohammad Amir : @adambenczik @gutenkunstabelzoltan @ACS Please send the carrier Located at E0JVA01_VC19(Anode Jumbo AGV) back to STK manually. Thank you very much! May 15, 2025 at 2:22 AM, adambenczik : Korean technician is working on it, we might need it. Also, we can't send it back manually if the Roll is in "?" status May 15, 2025 at 2:24 AM, Mohammad Amir : Thank you very much for the information! May 15, 2025 at 2:29 AM, Szeitz Flórián : Sziasztok! Anód press 1-2 re nem érkeznek a roll-ok Légyszives nèzzètek meg . Köszönöm May 15, 2025 at 2:31 AM, Kurgya Attila : Sziasztok Elindult a coatingon katod 1 termelés. Légyszi nézzetek oda nem-e kell támogatás. Köszönöm May 15, 2025 at 2:31 AM, gutenkunstabelzoltan : Poron vagyunk eppen majd erkezunk May 15, 2025 at 2:32 AM, Mohammad Amir : For Press Anode -1 , Please press LR we didn't receive any LR in recent time. For Press Anode -2 There is a job it is not moving cause there is a material exists on E0STKA33_P01(RBA2271). Thank you very much! May 15, 2025 at 2:33 AM, (Unknown) : Katód slitt 4-9-es AGV kiált hibára.megnéznétek ?köszi May 15, 2025 at 2:35 AM, Mohammad Amir : Currently RBA2271 has no job that's why it is not moving and blocking the job for Andoe press -2. I have already informed the @이주봉PM LEE JUBONG(FA) Regarding this issue,we are working on it. Thank you very much! May 15, 2025 at 2:43 AM, Mohammad Amir : @Szeitz Flórián For Press Anode -1 We have received LR successfully at 2:39 and carrier RBA2292 on the way. Thank you very much! May 15, 2025 at 2:48 AM, Mohammad Amir : @FA Please check RBA2271 located at E0STKA33_P01 it has no job and that's why it is blocking the job for Anode Press -2. Thank you very much! May 15, 2025 at 2:51 AM, adambenczik : Why is it here if it has no job? Can you send it back? May 15, 2025 at 2:53 AM, Mohammad Amir : It has no job that's why it is here. Actually first make E0STKA33_P01 to "IN" type afterwards I will give command to store in warehouse. Thank you very much! May 15, 2025 at 2:56 AM, adambenczik : I can't. I did the best a could, and sent AGV#15 to pick it up, and we will put it back in later May 15, 2025 at 3:00 AM, Mohammad Amir : This message was deleted. May 15, 2025 at 3:01 AM, Mohammad Amir : There is also one carrier RBA4328 located E0STKA33_P01_BP01 it also needs to go inside the STKA33. It also waiting cause E0STKA33_P01 is OUT type. Could you please also check it as well as it is now blocking press Anode -2 job. Thank you very much! May 15, 2025 at 3:04 AM, adambenczik : RBA4328 going in right now May 15, 2025 at 3:05 AM, adambenczik : Érkeznek. Volt egy kis katyvasz a raktárban May 15, 2025 at 3:05 AM, Mohammad Amir : Thank you very much. I see now E0STKA33_P01 has been set to IN type. Please after set it back to OUT type so that job for pressing-2 can continue. Thank you very much! May 15, 2025 at 3:12 AM, Mohammad Amir : Please make E0STKA33_P01_BP01 to Out type it is IN type that's why carrier RBA4314 can't move . And eventually again job for Pressing-2 has stopped. Thank you very much! May 15, 2025 at 3:13 AM, Mohammad Amir : Slitter -3 job also getting delayed because of this issue. Thank you very much! May 15, 2025 at 3:13 AM, adambenczik : It is in Out type May 15, 2025 at 3:15 AM, Mohammad Amir : Please check E0STKA33(3013) it is IN type that's why jobs are pending. Thank you very much! May 15, 2025 at 3:16 AM, adambenczik : See the red arrow under RBA4314? 🙃 May 15, 2025 at 3:16 AM, adambenczik : It means it is in Out mode May 15, 2025 at 3:16 AM, adambenczik : 3013 is in always in mode May 15, 2025 at 3:18 AM, adambenczik : When the STK is in Out mode, it still needs to have an In mode slot, in case there are two materials, one to go in, one to go out May 15, 2025 at 3:18 AM, Mohammad Amir : Yes ,thank you very much! May 15, 2025 at 3:20 AM, Mohammad Amir : Now AGV#15 has been assigned. ✅ Thank you very much! May 15, 2025 at 3:24 AM, Mohammad Amir : This issue has been resolved ✅. Now carrier located at AGV#19 has been successfully stored in STKA32(0100205). Thank you very much! May 15, 2025 at 3:25 AM, Mohammad Amir : Sir @이주봉PM LEE JUBONG(FA) For you information. Thank you very much! May 15, 2025 at 3:49 AM, Turianytsia Olesia : A szállítószalag probléma nem vett fel anyagot az A oldal R/W felől Cathode slitt 4 May 15, 2025 at 3:50 AM, (Unknown) : Anód slitt 1-2 re nemjönnek a tálcák.megnéznétek?köszi May 15, 2025 at 3:50 AM, Mohammad Amir : Checking May 15, 2025 at 3:52 AM, Mohammad Amir : Empty trays are on the way ✅ I have given priority to Andoe empty trays delivery so soon you will start receiving the trays. I am monitoring. Thank you very much! May 15, 2025 at 3:57 AM, (Unknown) : Katód slitt 4 nem veszi le a robotkar a reelt.megnéznétek?köszi May 15, 2025 at 4:01 AM, Mohammad Amir : @adambenczik Please check E0CNVA51_06052/53 there is INV-01 Run time Over Error and it has blocked the materials transfer. Thank you very much! May 15, 2025 at 4:10 AM, gutenkunstabelzoltan : Poron vagyunk May 15, 2025 at 4:14 AM, Mohammad Amir : @FA Please check this issue still exists,there's a queue of materials waiting on the CNVA51. Thank you very much! May 15, 2025 at 4:15 AM, gutenkunstabelzoltan : We are at powder at the moment May 15, 2025 at 4:18 AM, Szeitz Flórián : Sziasztok! Anód press 2 UW leszedő robot megállt a buffer tàtolon lévő roll-ra ràfogás közben May 15, 2025 at 4:57 AM, adambenczik : Megyünk, hamarosan May 15, 2025 at 5:02 AM, Mohammad Amir : @adambenczik Please check E0STKC13_C01 there is ready off during Forking error. Thank you very much! May 15, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.15 "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(4): Csanálosi Gábor, Takács Ádám, Kovács Ágnes , 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(0): May 15, 2025 at 6:14 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC13_C01 there is ready off during Forking error. Thank you May 15, 2025 at 6:25 AM, Yanina : Sziasztok)Cathode slitt 4 nincs tray ID May 15, 2025 at 6:25 AM, Yanina : R/W May 15, 2025 at 6:26 AM, Czeilinger Krisztián : Megyünk. May 15, 2025 at 6:37 AM, Czeilinger Krisztián : Kész. May 15, 2025 at 6:44 AM, Yanina : Köszönöm szépen May 15, 2025 at 6:48 AM, Szarka Adrián : Sziasztok katod pressen 21 13 agv útban van May 15, 2025 at 6:48 AM, Szarka Adrián : Küldjétek odébb kerlek köszönöm May 15, 2025 at 6:49 AM, Yanina : Cathode slitt 4, R/W 2 a tálcák nem érnek a helyükre May 15, 2025 at 6:50 AM, Czeilinger Krisztián : Megyünk May 15, 2025 at 6:51 AM, Szarka Adrián : Valaki ? May 15, 2025 at 6:51 AM, Pálosi Róbert : Mevyünk May 15, 2025 at 6:52 AM, Szarka Adrián : @Sazzad Bhai SKon TEMP felhasználó jelszó módosítást kérünk mert nem tudunk belépni. Köszönöm May 15, 2025 at 6:52 AM, Czeilinger Krisztián : Megyünk oda is. May 15, 2025 at 7:00 AM, Czeilinger Krisztián : A 21 és 13 AGV feladatra vár . May 15, 2025 at 7:01 AM, Szarka Adrián : Valaki tud ebben segíteni ? Mert szeretnénk neki állni dolgozni de nem tudunk belépni az RTD be köszönöm May 15, 2025 at 7:02 AM, Shahbaz 샤바즈 MCS/RTD : Okay, I will reset the password. May 15, 2025 at 7:06 AM, Nagy Dávid 4 : How long will this take you? May 15, 2025 at 7:06 AM, Shahbaz 샤바즈 MCS/RTD : Now you can login with old password. Thank you May 15, 2025 at 7:07 AM, Nagy Dávid 4 : Anod press 2 robot u/w error help help köszönöm szépen May 15, 2025 at 7:09 AM, Szarka Adrián : @Szücs Géza FT-B @김대호 (Kim Dae Ho) @김건희 ez mikor lesz meg javítva?? Éjjel is sok probléma volt vele May 15, 2025 at 7:10 AM, Czeilinger Krisztián : Itt vagyunk May 15, 2025 at 7:10 AM, Czeilinger Krisztián : Itt vagyunk May 15, 2025 at 7:11 AM, Czeilinger Krisztián : Kész. May 15, 2025 at 7:12 AM, Szarka Adrián : Köszönöm . Kérem jelezzetek feljebb a javítást mert hétvége óta nem jó. És nektek se jó és nekünk se hogy állandóan meg áll a robot. Köszönöm May 15, 2025 at 7:16 AM, Szarka Adrián : Anod Slitt konvejor sípok. Szerintem a lift állt meg mert a tele rilek mennek arra felé May 15, 2025 at 7:17 AM, Czeilinger Krisztián : Megyünk meg nézzük. May 15, 2025 at 7:23 AM, Nagy Dávid 4 : anod slitt 2 nince talca help help köszönöm szépen May 15, 2025 at 7:24 AM, 김대호 (Kim Dae Ho) : @방혁 PM(Bang.Hyuk) FA 안녕하세요 Pm님 현재 이 현상 조치가 안되고있습니다. 다시 한번 확인해주실수있나요 ? May 15, 2025 at 7:25 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Reel tray conveyor A51 track 6041 data loss error. Thanks May 15, 2025 at 7:26 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA is on holiday May 15, 2025 at 7:28 AM, Szücs Géza FT-B : i will go, i need 10-15 min, i go from powder area May 15, 2025 at 7:29 AM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you. There is a shortage of reel trays at the slitter. May 15, 2025 at 7:39 AM, "Shuvo/Ivancsa FA" : Need help.. Buffer IPS reading fail at Anode Storage 1. May 15, 2025 at 7:43 AM, Rácz Dániel / FA : Omv May 15, 2025 at 8:07 AM, "Shuvo/Ivancsa FA" invited Hasibul/Ivancsa FA. May 15, 2025 at 8:11 AM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Please checking why not moving E0STKC51 ! May 15, 2025 at 8:14 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51, Reel trays not moving. It says “Port: Not Output mode” Thank you May 15, 2025 at 8:17 AM, Rácz Dániel / FA : Which port ? May 15, 2025 at 8:21 AM, Shahbaz 샤바즈 MCS/RTD : Now they are moving, actually this was because there was a request to create a transfer command to manual ports but currently those ports are occupied. May 15, 2025 at 8:21 AM, Szücs Géza FT-B : no have error message. Port 8117.... It is a manual port, what use the manufacturing. Reels waiting on the NC manual ports. On Assy NC area. Lot of order going to NC. I think, you need delete some of them. May 15, 2025 at 8:22 AM, Szücs Géza FT-B : we cant do anything, we not create and not deleting orders. May 15, 2025 at 8:22 AM, Shahbaz 샤바즈 MCS/RTD : I got it, there was a transfer from E0STKC51_P03 to Manual port that’s why it was waiting, I rerouted that carrier to zone. May 15, 2025 at 8:24 AM, Szücs Géza FT-B : LTC1600 is on the P03 automatic port. This reel going to M06 manual port.... And the M06 manual port is not output mode.... May 15, 2025 at 8:25 AM, Shahbaz 샤바즈 MCS/RTD : Yes, I created a transfer command to zone for this one as well. May 15, 2025 at 8:27 AM, Szücs Géza FT-B : Material waiting on M06.... manufacturink on NC need remove the Reel from the reel tray. If the Tray is emty, this go to STKC51, after than, M06 is will be output. May 15, 2025 at 8:30 AM, Shahbaz 샤바즈 MCS/RTD : Got it. Now all the reel trays have been transferred from the conveyor, and only those that were requested earlier are waiting for the manual ports. Thank you. May 15, 2025 at 8:37 AM, Szücs Géza FT-B : I think, MCS members needing sometimes go in manufacturing, and they can be looking, how working the system. You would have more knowledge. This is not an insult, it's a suggestion. 🫡🙏👌 May 15, 2025 at 8:40 AM, Shahbaz 샤바즈 MCS/RTD : Actually, a few of the trays that were requested earlier were coming from the slitter, so when the transfer command was created, they are supposed to directly go to the manual port—that’s why they were waiting at P03. Anyway, thank you for your kind suggestion. May 15, 2025 at 8:45 AM, Szücs Géza FT-B : Most ports automatically change direction. (In or out) May 15, 2025 at 8:47 AM, Shahbaz 샤바즈 MCS/RTD : When there is a request for a manual transfer, we assume they will be removed instantly. That’s why we create the transfer command for all requested carriers. When they are not removed immediately, such instances occur. It’s better to order only the required number so they can be handled more easily. May 15, 2025 at 8:49 AM, Szücs Géza FT-B : I completely agree. And the lack of an empty Slitt tray is also causing this congestion. May 15, 2025 at 8:54 AM, Shahbaz 샤바즈 MCS/RTD : The actual issue was that the manual transfers created for the manual ports, but they were not removed, so the trays were just waiting there. There is no connection with the empty trays, as those will flow from Stocker C52. May 15, 2025 at 8:59 AM, FACS_Wooseok Choi : I checked press 2, there are a lot of encoder alarms, so I think I'll have to look into it in that situation. If you get an alarm, pls let me know. May 15, 2025 at 9:54 AM, Rácz Dániel / FA : @"Shuvo/Ivancsa FA" Anode Press #7 UW P01 port, the technician on working. May 15, 2025 at 9:56 AM, 김대호 (Kim Dae Ho) : Cathode press 8 Please check the L/R May 15, 2025 at 9:57 AM, Rácz Dániel / FA : @Szücs Géza FT-B A katód 32-es raktárba megint nem tudott az AGV beállni megfelelő pozícióba. Y tengely 0mm. Ezt jelezni kellene koreai támogatóknak vagy ha kapunk engedélyt akkor tiltsuk le addig. May 15, 2025 at 9:58 AM, Szücs Géza FT-B : Please shut down the port once it has completed its assigned tasks. May 15, 2025 at 10:00 AM, Sazzad Bhai SKon : LR received and job created. RBC2636 on the way, AGV 14 coming May 15, 2025 at 10:00 AM, Rácz Dániel / FA : Solved May 15, 2025 at 10:01 AM, Rácz Dániel / FA : Yes, good, thx. May 15, 2025 at 10:01 AM, 김대호 (Kim Dae Ho) : Thank you. 👍 May 15, 2025 at 10:45 AM, Rácz Dániel / FA : @Szarka Adrián @Erik Gerzsenyi @Nagy Dávid 4 EOSTKA51 raktárat Alpinista cég ellenőrzése miatt kis időre leállítom, @Koncz Tamás May 15, 2025 at 10:46 AM, 김대호 (Kim Dae Ho) : Please tell me the time. May 15, 2025 at 10:48 AM, Szarka Adrián : Mennyi idő ? 30 perc ? 1 óra ? May 15, 2025 at 10:54 AM, Koncz Tamás : Kész May 15, 2025 at 10:54 AM, Szarka Adrián : Köszi ☺️☺️☺️ May 15, 2025 at 10:57 AM, 김대호 (Kim Dae Ho) : Anode press 1 r/w Please check the error. May 15, 2025 at 10:59 AM, Szarka Adrián : Katod Slitt 1-2 miért nem jön az agv ? Van még elérhető anyag rá ? May 15, 2025 at 11:01 AM, Shahbaz 샤바즈 MCS/RTD : Currently there is no material available for Ca Slitter 1-2. May 15, 2025 at 11:01 AM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Please check this, thank you. May 15, 2025 at 11:02 AM, Shahbaz 샤바즈 MCS/RTD : Yes, there is no material available. May 15, 2025 at 11:02 AM, 서지원 : @FA Can we use agv for anode coating 1st line from now on??? May 15, 2025 at 11:04 AM, Rácz Dániel / FA : Igen, nincs elérhető anyag. 🙁 May 15, 2025 at 11:04 AM, Rácz Dániel / FA : Thx May 15, 2025 at 11:12 AM, Szarka Adrián : anod slitt 2 nince talca May 15, 2025 at 11:12 AM, Szarka Adrián : Legyszi nézzetek meg mi a baj köszönöm May 15, 2025 at 11:13 AM, Pintér Gábor : Coating Anód 1 és Katód 1 is AGV-vel megy May 15, 2025 at 11:14 AM, Shahbaz 샤바즈 MCS/RTD : @FA There is a transfer command. Please check stocker A34 port is OOS. Thank you May 15, 2025 at 11:18 AM, Szarka Adrián : Valaki ? May 15, 2025 at 11:20 AM, Nagy Dávid 4 : Anod slitt1 ninsc AGV 17p help help köszönöm szépen May 15, 2025 at 11:21 AM, Yanina : Slitt Cathode 1 nem jó transzfer R/W May 15, 2025 at 11:22 AM, Rácz Dániel / FA : @Nagy Dávid 4 Hyere légyszíves Ca Slitt 1 re help help May 15, 2025 at 11:23 AM, Nagy Dávid 4 : Megyek May 15, 2025 at 11:23 AM, Rácz Dániel / FA : Valószínűleg az anód 51 es raktár leállása miatt nincsen May 15, 2025 at 11:23 AM, Nagy Dávid 4 : Anod press 3 nincsen agv help help köszönöm szépen May 15, 2025 at 11:45 AM, Yanina : Cathode slitt 3 probléma transzfer R/W May 15, 2025 at 11:49 AM, Rácz Dániel / FA : Jövök May 15, 2025 at 11:54 AM, Rácz Dániel / FA : Kész May 15, 2025 at 11:57 AM, Viktor Vadas : Sziasztok! Anod 1re kellene magyar segitseg mert a Koreai kollegak nem biztos hogy elbirnak vele, feltorlodtak a sor elott az AGV-k es nem jut el a rewinderhez ami nekunk kell. Koszonom! May 15, 2025 at 11:58 AM, Rácz Dániel / FA : Jövök May 15, 2025 at 12:47 PM, Szarka Adrián : Anod Slitt 3 robot probléma Rw oldalon May 15, 2025 at 12:48 PM, Czeilinger Krisztián : Megyünk. May 15, 2025 at 12:52 PM, Szarka Adrián : Anod Slitt 1 nem jön az agv May 15, 2025 at 12:52 PM, Sazzad Bhai SKon : Checking May 15, 2025 at 12:52 PM, Szarka Adrián : Megtudjátok nézni miért ? May 15, 2025 at 12:58 PM, Sazzad Bhai SKon : Last LR received at 10:45 and it was successful. SCS received the job with HCACK reply 0. But not initiated @Scs please check STK E0STKA31 May 15, 2025 at 1:00 PM, Shahbaz 샤바즈 MCS/RTD : @FA The E0STKA31, port H/S off. Please check May 15, 2025 at 1:20 PM, Szarka Adrián : Gáza azt tanácsolta hogy törölni kéne a feladatot és újra meg próbálni hát ha úgy jó lesz May 15, 2025 at 1:20 PM, Szarka Adrián : @Shahbaz 샤바즈 MCS/RTD May 15, 2025 at 1:22 PM, Sazzad Bhai SKon : RBA4914 on the way, AGV 17 got the job May 15, 2025 at 1:26 PM, Czeilinger Krisztián : Thank you. May 15, 2025 at 1:38 PM, Szarka Adrián : Merre jár az agv ? Mert nem ért még ide 😭😭😭 anod Slitt 1 May 15, 2025 at 1:39 PM, Szarka Adrián : 30 perce áll a gep mert nem jön az agv May 15, 2025 at 1:40 PM, Böröcz Tamás : Ibanchan May 15, 2025 at 1:42 PM, Böröcz Tamás : @mcs Could you check that is there order for E1SLA010_P01? May 15, 2025 at 1:46 PM, Shahbaz 샤바즈 MCS/RTD : There is order from E0STKA31 May 15, 2025 at 1:47 PM, Shahbaz 샤바즈 MCS/RTD : But in CIM side it shows “Port H/S Off” May 15, 2025 at 1:49 PM, Szarka Adrián : Anod Press 3 re se jön az agv May 15, 2025 at 1:49 PM, Szarka Adrián : 57 perce nem jön az agv May 15, 2025 at 1:50 PM, Sazzad Bhai SKon : We're receiving this error frequently from roll STK. @scs please look into roll STK E0STKA31 Thank you May 15, 2025 at 1:50 PM, Szarka Adrián : Anod Press - Slitt megállt az összes agv nem mennek egyik géphez se May 15, 2025 at 1:51 PM, Sazzad Bhai SKon : Which line? May 15, 2025 at 1:55 PM, Szarka Adrián : Teljes anod Press - Slitt May 15, 2025 at 2:00 PM, Rácz Dániel / FA : @Szarka Adrián Az anód oldalon újraindítottuk az ACS kommunikációt, mert az összes AGV csak várakozott feladatra. MCS-ben volt feladat, de az ACS-ben nem volt. Eddig úgy nézki, hogy bejött az újraindítás, mert az AGV-k elondultak. May 15, 2025 at 2:01 PM, Szarka Adrián : Köszönöm szépen May 15, 2025 at 2:11 PM, Szarka Adrián : Ha van idő arra hogy ra neznetek hogy ment e agv Slitt 1 re és Press 3 ra azt meg köszönöm May 15, 2025 at 2:16 PM, Rácz Dániel / FA : Nézem May 15, 2025 at 2:19 PM, Rácz Dániel / FA : AN SL 1 re megy a 23 as AGV AN SL 2 re megy a 17 es AGV AN Pr 8 ra megy a 19 es AGV May 15, 2025 at 2:22 PM, Rácz Dániel / FA : AN Pr 3 ra van feladat de még nincs az AGV n anyag May 15, 2025 at 2:22 PM, Rácz Dániel / FA : Először a AN Sl 2 re veszi az anyagot az AN 31 ből May 15, 2025 at 2:29 PM, Nagy Dávid 4 : Anod press 8 vissza kelene küldeni agv-vel az anyagot rosszat hozott ki köszönöm szépen May 15, 2025 at 2:30 PM, Rácz Dániel / FA : Megyek May 15, 2025 at 2:31 PM, Sazzad Bhai SKon : UR not received May 15, 2025 at 2:31 PM, Rácz Dániel / FA : OMV May 15, 2025 at 2:32 PM, Sazzad Bhai SKon : On P01, the material was arrived by RTD rules. Why the material is wrong? May 15, 2025 at 2:36 PM, Rácz Dániel / FA : I pushed the UD REQ button, AGV #24 is here. May 15, 2025 at 2:40 PM, FACS_오창훈_CHANGHOON : 음극 gf AGV 1번 충전기 상태 점검 부탁합니다. May 15, 2025 at 2:40 PM, Szarka Adrián : Anod Slitt konvejor probléma May 15, 2025 at 2:40 PM, Szarka Adrián : Köszi May 15, 2025 at 2:40 PM, Rácz Dániel / FA : Itt vagyom May 15, 2025 at 2:45 PM, FACS_오창훈_CHANGHOON : @fa GF_CPS_A_CHAGER_01 Communication Err check plz~ May 15, 2025 at 2:46 PM, Yanina : Cathode slitt az anyag nem halad a szállítószalagon, nem jut el a raktárig May 15, 2025 at 2:46 PM, Rácz Dániel / FA : Megyek May 15, 2025 at 2:51 PM, Rácz Dániel / FA : Kész, köszönöm a segítséged. May 15, 2025 at 2:52 PM, Nagy Dávid 4 : Coating agv 9 számú agv kiált hibára help help köszönöm szépen May 15, 2025 at 2:52 PM, Rácz Dániel / FA : Jövök May 15, 2025 at 2:52 PM, Rácz Dániel / FA : Coming May 15, 2025 at 2:57 PM, Rácz Dániel / FA : Solved, the charger ready push button off. May 15, 2025 at 2:57 PM, Rácz Dániel / FA : Kész May 15, 2025 at 2:58 PM, Rácz Dániel / FA : Kész May 15, 2025 at 3:00 PM, FACS_오창훈_CHANGHOON : 조치 되었습니다 May 15, 2025 at 3:34 PM, KIM SEYEON [김세연]_FA : 어떤문제였고, 어떻게 조치된건가요? May 15, 2025 at 3:37 PM, Pintér Gábor : Foil stockerhez szeretnénk segítséget kérni köszi May 15, 2025 at 3:37 PM, Pintér Gábor : Coating May 15, 2025 at 3:38 PM, FACS_오창훈_CHANGHOON : 충전기 RDY 신호 송신 BUSY 신호 미수신 3회상태였고 헝가리 테크니션이 충전기 리부팅하여 조치 되었습니다 May 15, 2025 at 4:10 PM, Pintér Gábor : Katód 1 1st rw nem jon az agv!!!! May 15, 2025 at 4:12 PM, Czeilinger Krisztián : Coating? Slitt? Press? May 15, 2025 at 4:13 PM, Rácz Dániel / FA : Azt hiszem Ő kótingos May 15, 2025 at 4:13 PM, Czeilinger Krisztián : Oksi köszönöm. May 15, 2025 at 4:15 PM, Czeilinger Krisztián : @Shahbaz 샤바즈 MCS/RTD please send an agv to coating cathode 1. Urgent May 15, 2025 at 4:15 PM, 서지원 : @FA @KIM SEYEON [김세연]_FA 양극 코터 1라인 1st R/W AGV 미도착중인데 빠른 확인 부탁드립니다. 버퍼 제외 다음 롤까지 이미 스플라이싱 진행됐습니다 May 15, 2025 at 4:16 PM, KIM SEYEON [김세연]_FA : 네 확인해보겠습니다 May 15, 2025 at 4:16 PM, 서지원 : 버퍼에 롤이 올려져있어 이미 스플라이싱 된 롤에대해선 샘플 취외 및 반제품 검사 못하고있습니다. May 15, 2025 at 4:16 PM, Shahbaz 샤바즈 MCS/RTD : U/W right? May 15, 2025 at 4:16 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check it May 15, 2025 at 4:17 PM, Czeilinger Krisztián : R/W 1 A. May 15, 2025 at 4:18 PM, Czeilinger Krisztián : R/W 1 B May 15, 2025 at 4:19 PM, Shahbaz 샤바즈 MCS/RTD : Checking May 15, 2025 at 4:19 PM, 서지원 : 15분뒤 이재기 버퍼에 대기중인 롤/이미 스플라이싱 완료된 롤/현재 생산되고 있는 롤 까지 꽉차서 코터 멈춰야합니다. 수동으로라도 agv조작 부탁드립니다 May 15, 2025 at 4:19 PM, Shahbaz 샤바즈 MCS/RTD : There is carrier location mismatch for UR from E1CTC010_P03 May 15, 2025 at 4:20 PM, Szarka Adrián : Anod Slitt konvejor megint nem jó köszi May 15, 2025 at 4:20 PM, Shahbaz 샤바즈 MCS/RTD : RBC0032 us already in stocker E0STKC32_0100402 May 15, 2025 at 4:21 PM, Shahbaz 샤바즈 MCS/RTD : @Czeilinger Krisztián May 15, 2025 at 4:22 PM, KIM SEYEON [김세연]_FA : geza shift leader가 가고 있습니다. 조금만 기다려주십시오. May 15, 2025 at 4:30 PM, Szücs Géza FT-B : @mcs can you check the LD history on E1CTC010 P01? May 15, 2025 at 4:30 PM, 서지원 : 음극 코팅 1라인 1st R/W도 동일하네요 이재기 버퍼 롤/이미 스플라이싱 완료된 롤/세번째로 감기고 있는 롤 상태입니다. 잡이 생성 안된 원인이 무엇인지 확인 부탁드리겠습니다. May 15, 2025 at 4:30 PM, Szücs Géza FT-B : sorry p03 May 15, 2025 at 4:31 PM, Rácz Dániel / FA : Kész May 15, 2025 at 4:31 PM, Rácz Dániel / FA : Lassan érkeznek a reel tálcák May 15, 2025 at 4:33 PM, Shahbaz 샤바즈 MCS/RTD : There was a with RBC0032 at 15:51 but the same ID exists in the warehouse so that caused carrier location mismatch. May 15, 2025 at 4:33 PM, Szarka Adrián : Katod Press 7 re nem jön az agv May 15, 2025 at 4:34 PM, Szarka Adrián : Most nyomtam megint lr megnézitek May 15, 2025 at 4:34 PM, Szarka Adrián : Köszönöm May 15, 2025 at 4:34 PM, Rácz Dániel / FA : AN 7 es AGV nek útban volt egy elektromos béka, ez miatt késik az anyag az AN Press 3 ra May 15, 2025 at 4:34 PM, Rácz Dániel / FA : Üres May 15, 2025 at 4:35 PM, Shahbaz 샤바즈 MCS/RTD : UR with RBC0032* May 15, 2025 at 4:36 PM, Rácz Dániel / FA : Nincs elérhető anyag rá May 15, 2025 at 4:54 PM, Szarka Adrián : Anod Press 8 gépen a robot menet közben el ment kávézni. És el felejtette fel tenni a gépre a rollt. May 15, 2025 at 4:55 PM, Szarka Adrián : Gyertek legyszi és nézzetek ra hogy miért pihent meg. Köszi May 15, 2025 at 4:55 PM, Rácz Dániel / FA : Megyek May 15, 2025 at 5:20 PM, Nagy Dávid 4 : anod slitt 2 nince talca help help köszönöm szépen May 15, 2025 at 5:24 PM, Shahbaz 샤바즈 MCS/RTD : An Reel trays are on the way May 15, 2025 at 6:00 PM, adambenczik : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician 0 SL ———————————— Electrode (2): Benczik Ádám Gutenkunst Ábel Zoltán ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Édl Tamás ———————————— May 15, 2025 at 6:31 PM, Powder tréner : Sziasztok,szeretnék kérni segítséget,poron anód raktárba conveyoron elakadt egy raklap és nem jön ki. May 15, 2025 at 6:58 PM, VK (mcs) : @FA Please check Anode Roll STK A34 auto port01 It’s in manual mode. Thx May 15, 2025 at 7:12 PM, KIM SEYEON [김세연]_FA : Photo May 15, 2025 at 7:12 PM, KIM SEYEON [김세연]_FA : @FA Technicians please help agv3 retry error on press anode 7 May 15, 2025 at 7:13 PM, KIM SEYEON [김세연]_FA invited 은향(OH EUN HYANG). May 15, 2025 at 7:14 PM, KIM SEYEON [김세연]_FA invited 송태용(Song tae yong). May 15, 2025 at 7:15 PM, 박정근(Park) : 음극코터1라인 리와인더2번 AGV가 도착하여도 이재기 작동을 안합니다. 알람명 : AGV Retry count Exceeded. 현지 테크니션 대응중이지만 해결이 안되는것같습니다. May 15, 2025 at 7:15 PM, KIM SEYEON [김세연]_FA : @송태용(Song tae yong) please monitor coater transfer mc and agv. if any problem happens, please share information and get help from @adambenczik @gutenkunstabelzoltan May 15, 2025 at 7:16 PM, KIM SEYEON [김세연]_FA : @adambenczik @gutenkunstabelzoltan anyone in coater area? May 15, 2025 at 7:16 PM, adambenczik : No May 15, 2025 at 7:16 PM, adambenczik : Only two technicians today May 15, 2025 at 7:17 PM, KIM SEYEON [김세연]_FA : please move to coater area. coater need transfer control. May 15, 2025 at 7:17 PM, gutenkunstabelzoltan : We are fixing the skt at powder May 15, 2025 at 7:17 PM, adambenczik : We are at Powder May 15, 2025 at 7:18 PM, KIM SEYEON [김세연]_FA : please leave powder to @이주봉PM LEE JUBONG(FA) and move to coater. May 15, 2025 at 7:18 PM, KIM SEYEON [김세연]_FA : coater need agv retry exceed error solving. May 15, 2025 at 7:21 PM, adambenczik : Technicians are forbidden from working alone. We can't be at two places at the same time, sorry May 15, 2025 at 7:23 PM, Oleksii Krasnoshchok : Hello in anode press 3 long time waiting Agv for u/w May 15, 2025 at 7:25 PM, KIM SEYEON [김세연]_FA : so going to coater together. May 15, 2025 at 7:25 PM, KIM SEYEON [김세연]_FA : nobody can deal with agv retry error now. May 15, 2025 at 7:25 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please check available lot at press 3 May 15, 2025 at 7:26 PM, VK (mcs) : Job assigned from STK A34 but there is an issue in auto port. I already informed to @FA team. But I will ask them again. Thx May 15, 2025 at 7:28 PM, adambenczik : He told us to not go, and wait May 15, 2025 at 7:28 PM, KIM SEYEON [김세연]_FA : okay May 15, 2025 at 7:28 PM, KIM SEYEON [김세연]_FA : coater area I'd handled by korean now please solve powder problem May 15, 2025 at 7:30 PM, VK (mcs) : Now carrier is on AGV #11 and it is on the way. May 15, 2025 at 7:39 PM, Szeitz Flórián : Sziasztok! Anód slitt 3-nál a Tálca rossz pozícióban van ezért megállt a tovább menetel Gyertek légyszives ès javítsátok köszönöm May 15, 2025 at 7:41 PM, Szeitz Flórián : Emiatt a Slitt 2 re se érkezik. May 15, 2025 at 7:42 PM, adambenczik : Jövünk May 15, 2025 at 7:58 PM, adambenczik : Kész May 15, 2025 at 7:59 PM, waseem/ Iváncsa Fa : Does anyone know tha password of E0STKA31 STK MCP May 15, 2025 at 8:01 PM, waseem/ Iváncsa Fa : @adambenczik May 15, 2025 at 8:44 PM, Powder tréner : S.O.S Poron anód raktáron kieset a raklap a Conveyorbol. May 15, 2025 at 8:45 PM, gutenkunstabelzoltan : Wow May 15, 2025 at 8:52 PM, Powder tréner : Nem vic May 15, 2025 at 8:53 PM, gutenkunstabelzoltan : Uton vagyunk mar May 15, 2025 at 8:53 PM, gutenkunstabelzoltan : Es nem nevetunk May 15, 2025 at 9:09 PM, Szeitz Flórián : Sziasztok! Anód slitt 2 re nem érkezik tálca . Megnézitek az okát. Köszönöm May 15, 2025 at 9:18 PM, VK (mcs) : There is an issue in STK A52. I already informed to @FA team. May 15, 2025 at 9:52 PM, gutenkunstabelzoltan : Most hozott a daru ures talcat uh sztem uton vannak May 15, 2025 at 9:57 PM, Szeitz Flórián : Már nagyon várjuk May 15, 2025 at 10:05 PM, Szeitz Flórián : 2 db jött abból egyik se a Slitt 2re May 15, 2025 at 10:08 PM, gutenkunstabelzoltan : Tovabbra is ezt tudom mondani: a talcak uton vannak May 15, 2025 at 10:09 PM, adambenczik : Most fog oda érni kettő May 15, 2025 at 10:33 PM, 조혜근 : The PC of cathode roll warehouse unit 2 is powered off. Is there a way to turn it on? May 15, 2025 at 10:36 PM, adambenczik : Some of them don't work. You can try turning it on by opening the door below the screen and pushing the power button. If that didn't work, please use a different one May 15, 2025 at 10:37 PM, 조혜근 : It's locked May 15, 2025 at 10:55 PM, 조혜근 : 양극 롤 창고 2호기 PC가 꺼져있습니다. 혹시 전원 켤 수 있는 아래쪽 손잡이 열쇠 가지고 계신 분 있으실까요? May 15, 2025 at 10:57 PM, Fahim/ivancsa left this chatroom. May 16, 2025 at 12:34 AM May 16, 2025 at 12:34 AM, Szeitz Flórián : Anód press 8 RW robot probléma. Gyertek légyszives köszönöm May 16, 2025 at 1:20 AM, gutenkunstabelzoltan : Kesz May 16, 2025 at 1:57 AM, Sárvári Márk : FA kolléga segítségét kérjük az Anod raktárba.✌️ May 16, 2025 at 1:58 AM, adambenczik : Megyünk ✌️ May 16, 2025 at 2:00 AM, gutenkunstabelzoltan : Kesz May 16, 2025 at 3:39 AM, Szeitz Flórián : Sziasztok! Anód roll raktár 3 stokerben kiállt a 7nAGV hibára és a leszedő robot is. May 16, 2025 at 3:40 AM, adambenczik : Megyünk May 16, 2025 at 3:55 AM, Szeitz Flórián : Sziasztok! Anód press 3-4 re nem érkezik Anyag megnézitek miért nem ? Köszönöm May 16, 2025 at 3:56 AM, adambenczik : @VK (mcs) is there no material? May 16, 2025 at 3:57 AM, VK (mcs) : Checking May 16, 2025 at 3:58 AM, VK (mcs) : Yes there is no available material for Press 3&4. May 16, 2025 at 3:59 AM, adambenczik : Thank you May 16, 2025 at 5:05 AM, Vászon Márton : Katód pressz 4es mellett agv hibával May 16, 2025 at 5:05 AM, Vászon Márton : Szerintem a mi tekercsünkért jönne a 3asra nézze meg valaki köszi May 16, 2025 at 5:06 AM, adambenczik : 1 perc és ott vagyok May 16, 2025 at 6:10 AM, duzzaman Md (MCS) : @FA Good Morning! Please check E0STKA33_C01 Load collapse error. Thanks and have a good day ahead. May 16, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.16 Time:06:00~18:00 1. BAEK HOJONG 백호종PM Köszönöm szépen May 16, 2025 at 6:52 AM, 김대호 (Kim Dae Ho) : Anode press 3 Please check the L/R May 16, 2025 at 6:53 AM, duzzaman Md (MCS) : Hi, there is active LR But ni search lot May 16, 2025 at 6:54 AM, duzzaman Md (MCS) : The last LR was recieved at 6:03 am May 16, 2025 at 6:56 AM, 김대호 (Kim Dae Ho) : Is Roll on the way? May 16, 2025 at 6:59 AM, KIM SEYEON [김세연]_FA : no an roll material in storage? May 16, 2025 at 6:59 AM, duzzaman Md (MCS) : Currently no active jobs May 16, 2025 at 7:02 AM, duzzaman Md (MCS) : Yes, bobbins are going to the P02 (R/W) ports. For P01 (U/W) ports, not lot available. May 16, 2025 at 8:56 AM, Koska Szilárd János : Sziasztok Anód oldalon nemjön ék a reel tálcák megtudnátok nézni May 16, 2025 at 9:36 AM, Koska Szilárd János : Sziasztok kérnék egykis segítséget Anód oldalon az SL asztalnál az 1 és Agv t eltudnátok vinni? May 16, 2025 at 9:36 AM, Koska Szilárd János : Köszönöm May 16, 2025 at 9:36 AM, Skwarek Tibor : Megyünk May 16, 2025 at 9:36 AM, 김대호 (Kim Dae Ho) : Why isn't the Anode sliter tray coming? May 16, 2025 at 9:37 AM, Sazzad Bhai SKon : Checking May 16, 2025 at 9:37 AM, Sazzad Bhai SKon : There are transport orders, I'll increase MCS priority May 16, 2025 at 9:37 AM, Skwarek Tibor : There was a tray stuck, there wasn t error. Thats why we couldn t see May 16, 2025 at 9:38 AM, 김대호 (Kim Dae Ho) : Thank you so much 👍 May 16, 2025 at 10:28 AM, Koska Szilárd János : Gyertek létszives Anód slitt5_6 nál conveyor hiba May 16, 2025 at 10:29 AM, Viczai Tamás : Megyünk May 16, 2025 at 10:55 AM, Viczai Tamás : Electrode CA Press 2 uw: transzfer neki ment az AGV -nek és elnyírta a szenzor kábeljét. May 16, 2025 at 11:30 AM, Czél Tamás : Sziasztok Katód Press 2-őn a robot megadta magát félúton, kérlek nézzetek rá. Köszönöm May 16, 2025 at 11:31 AM, Skwarek Tibor : Be van írva egyel fentebb, hogy transfer ütközött. Elnyírta a szenzor kábelt. May 16, 2025 at 12:30 PM, FACS_오창훈_CHANGHOON : 양극 프레스 2호기 화물감지 센서 케이블 상태 불량으로 감지안되어 양극 프레스 6호기 센서를 사용해 교환 조치하였고 정상 작동 중입니다. May 16, 2025 at 12:33 PM, 김대호 (Kim Dae Ho) : 감사합니다. @Czél Tamás May 16, 2025 at 12:43 PM, Czél Tamás : Ohh, thank you May 16, 2025 at 2:26 PM, duzzaman Md (MCS) : @FA Good afternoon ! Please check E0CNVC51_08_049 INV 01 RUNTIME ERROR thank you! May 16, 2025 at 2:51 PM, 최재균 : @KIM SEYEON [김세연]_FA 현재 전극 코팅 양극 1 라인 세컨 리와인더 통로 사이에서 AGV 문제로 조치중인데 시간이 많이 소요 되서 설비 정지 될꺼 같습니다. May 16, 2025 at 2:52 PM, KIM SEYEON [김세연]_FA : 확인해보겠습니다. May 16, 2025 at 2:54 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please FA technicians control agv and transfer mc May 16, 2025 at 2:58 PM, Farkas Tamàs : Ok May 16, 2025 at 3:10 PM, Simon Attila F. A. : @duzzaman Md (MCS) please help, EC1P073F52782 on the ca agv11. Please send to the warehouse. May 16, 2025 at 3:10 PM, Sazzad Bhai SKon : Checking May 16, 2025 at 3:12 PM, Simon Attila F. A. : If ready the new order, I seitch auto mode this agv. May 16, 2025 at 3:12 PM, Simon Attila F. A. : *switch May 16, 2025 at 3:17 PM, duzzaman Md (MCS) : Plese put it to auto mode May 16, 2025 at 3:18 PM, Simon Attila F. A. : Now no destination... May 16, 2025 at 3:21 PM, Sazzad Bhai SKon : Is it currently Installed on AgV 11? May 16, 2025 at 3:22 PM, Simon Attila F. A. : Ca side, yep. May 16, 2025 at 3:22 PM, Sazzad Bhai SKon : This is the problem, because the carrier is showing at mixing port May 16, 2025 at 3:22 PM, Sazzad Bhai SKon : Coating May 16, 2025 at 3:23 PM, Simon Attila F. A. : E0JGVC01_VC11 May 16, 2025 at 3:23 PM, Simon Attila F. A. : This is full number. May 16, 2025 at 3:28 PM, duzzaman Md (MCS) : This job still exists in ACS. Please delete it from ACS. Then the job can be created again May 16, 2025 at 3:29 PM, Simon Attila F. A. : Done. May 16, 2025 at 3:32 PM, Sazzad Bhai SKon : AGV is refusing the job May 16, 2025 at 3:35 PM, Sazzad Bhai SKon : Because the carrier is still on E1CTC010_P02, according to AGV May 16, 2025 at 3:45 PM, Oláh Rajmund : Anode slitt 2. 25 perce nincs AGV Rá tudnátok nézni? Koszonom May 16, 2025 at 3:45 PM, Skwarek Tibor : Nézzük May 16, 2025 at 3:47 PM, duzzaman Md (MCS) : No materials available at the moment May 16, 2025 at 3:48 PM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD Now this roll in the warehouse with wrong number. Can you change this? Wrong nr is UNK250516130157732SE, corrrect nr is EC1P073F52782. May 16, 2025 at 3:48 PM, Sazzad Bhai SKon : In this case, best option is to make it out from manual port and restock May 16, 2025 at 3:49 PM, Simon Attila F. A. : This roll was already on AGV, so I couldn't send it to a manual port. May 16, 2025 at 3:50 PM, Simon Attila F. A. : or should I request it now and store it back? May 16, 2025 at 3:51 PM, Sazzad Bhai SKon : Yes please remove the material (UNK) from manual port and restock May 16, 2025 at 3:51 PM, Simon Attila F. A. : Ok. May 16, 2025 at 3:51 PM, Simon Attila F. A. : Thank you for help. May 16, 2025 at 3:52 PM, duzzaman Md (MCS) : @FA Please check E0STKA52 Crane is oos. Load oversize error .thanks May 16, 2025 at 4:05 PM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD thanks to help, now all right. May 16, 2025 at 4:53 PM, 김대호 (Kim Dae Ho) : Cathode slitter 1 Don't you have any roll that can be worked on? May 16, 2025 at 5:00 PM, duzzaman Md (MCS) : There is job. Due to AGV problem it has been delayed. VC07 will be delivering materials May 16, 2025 at 5:02 PM, KIM SEYEON [김세연]_FA : what was the agv alarm? May 16, 2025 at 5:05 PM, duzzaman Md (MCS) : AGV assigned/unassigned many times. It was first assigned to VC21 , the it got un assigned and finally assigned to VC07 , which has already departed . May 16, 2025 at 5:19 PM, KIM SEYEON [김세연]_FA : what was the agv number and what time? need analysis. May 16, 2025 at 5:40 PM, duzzaman Md (MCS) : The transfer started at E0STKC32, Unit ID 0100104 Carrier ID - RBC0333 Rack out at 16:31 at E0STKC32_P01 Transfer initiated at 16:31 and Got HCACK 4 reply VC21 was assigned at 16:31 Vehicle unassigned at 16:34 New vehicle VC 07 assigned at 16:36 Vehicle arrived at 16:48 Vehicle acquire completed at 16:50 Vehicle departed at 16:55 It arrived at 17:10 At 17:11, the job was completed May 16, 2025 at 5:45 PM, FACS_오창훈_CHANGHOON : 양극 코터 1라인 2nd rw 11번 AGV 동일 에러 발생중입니다. May 16, 2025 at 5:47 PM, duzzaman Md (MCS) : Additionally, VC 21 got assigned and unassigned at 17:35. Also , from STK output to Slit input port it took around 15 mins which is unusual too. It generally takes around 5 mins. May 16, 2025 at 5:47 PM, Baek Hojong(백호종)FA : 메뉴얼대로 일단 AGV에 내리고 빼서 창고로 넣어주세요 May 16, 2025 at 5:58 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 16, 2025 at 5:59 PM, 박정근(Park) : 양극코터 2라인 이재기가 롤취외하는과정에서 밀림현상으로 롤 파손및 이재기 작동 정지상태입니다. May 16, 2025 at 6:02 PM, KIM SEYEON [김세연]_FA : 확인해보겠습니다 May 16, 2025 at 6:03 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check May 16, 2025 at 6:03 PM, 서지원 : 해당 롤 Lot번호/ 수율 반영 스크랩 필요 m수 알려주시면 감사하겠습니다. May 16, 2025 at 6:05 PM, 서지원 : @FA @KIM SEYEON [김세연]_FA 코터에서 매 Roll마다 이재기 사용시 혹시나 공보빈을 넣지못해 설비를 멈춰야할까 마음 졸이는 상황이 계속 반복되는데, 문제 발생 시 수동으로라도 즉시 조작할수있는 방법은 없는걸까요?? May 16, 2025 at 6:10 PM, KIM SEYEON [김세연]_FA : 전화드리겠습니다 May 16, 2025 at 6:22 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 16 Time: 18:00~06:00 1. Jeong Woo-jun PM 2. Samkoo Lee Minjae 3.Samkoo Choi Gisu May 16, 2025 at 6:33 PM, KIM SEYEON [김세연]_FA : 우선 생산에 지장을 드려 죄송합니다. 지속적으로 인원 충원을 하고 있습니다.. May 16, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA invited 최기수(GI SU CHOI). May 16, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : 야간에는 ㄴ 삼구 : @최기수(GI SU CHOI) ㄴ 방글라데시 인원2명이 코터에서 모니터링 및 수동조작 하겠습니다. May 16, 2025 at 6:37 PM, 최기수(GI SU CHOI) : 네 알겠습니다 May 16, 2025 at 8:24 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check LTC0205 located at E0CNVC51_P06 it is not moving and blocking empty trays CA delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! May 16, 2025 at 8:25 PM, Dániel Hufnágel : Just a minute! May 16, 2025 at 8:48 PM, Yena Valerii : Hello, pls come to anode press 2 May 16, 2025 at 9:00 PM, Turianytsia Olesia : A szállítószalag nem működik. Cathode slitt 2 May 16, 2025 at 9:14 PM, Turianytsia Olesia : A 21-es számú AGV elakadt Cathode slitt 3 May 16, 2025 at 9:41 PM, Mohammad Amir : @Dániel Hufnágel Please check E0CNVC51_08_011 there is INV-01 Run time Over Error and it has blocked materials recovery. Thank you very much! May 16, 2025 at 11:00 PM, Yena Valerii : please come to anode press 1 May 16, 2025 at 11:14 PM, 류종석(RyuJongSeok) : 코팅 양극 2라인 2nd리와인더 확인해 주세요. May 16, 2025 at 11:14 PM, 류종석(RyuJongSeok) : @최기수(GI SU CHOI) May 16, 2025 at 11:28 PM, 류종석(RyuJongSeok) : 라인 정지 가능성 있습니다. 수동 조작으로라도 롤 좀 내려 주세요 May 16, 2025 at 11:31 PM, Jun(정우준)_SKOH FA : 네 가고있습니다. May 16, 2025 at 11:34 PM, Mohammad Amir : This message was deleted. May 16, 2025 at 11:34 PM, Mohammad Amir : @Dániel Hufnágel Please check E0CNVA51_08_152/151 there is INV-01 Run time Over Error and it has blocked materials recovery. Thank you very much! May 16, 2025 at 11:36 PM, Turianytsia Olesia : A szállítószalag elakadt. Anode slitt 2 May 16, 2025 at 11:40 PM, Dániel Hufnágel : Omw May 16, 2025 at 11:56 PM, 장정훈 : @FA Runtime over error occurred on Anode 6014 C/V. Please check! May 16, 2025 at 11:56 PM, Mohammad Amir : @Dániel Hufnágel Please check E0CNVA51_08_15/014 there is INV-01 Run time Over Error and it has blocked materials recovery. And there is queue of materials on the CNV. Thank you very much! May 16, 2025 at 11:56 PM, Mohammad Amir : 06014/15** May 17, 2025 at 12:03 AM May 17, 2025 at 12:03 AM, Turianytsia Olesia : A szállítószalag elakadt. Anode slitt 2 May 17, 2025 at 12:03 AM, Jun(정우준)_SKOH FA : I m on my way May 17, 2025 at 12:34 AM, Mohammad Amir : @Dániel Hufnágel Please check E0CNVC51_08_012/013 there is INV-01 Run time Over Error and it has blocked materials recovery. Thank you very much! May 17, 2025 at 12:41 AM, N.Zoli F.A. : We are going May 17, 2025 at 12:42 AM, Mohammad Amir : Thank you very much! May 17, 2025 at 12:49 AM, N.Zoli F.A. : Solved May 17, 2025 at 12:49 AM, Mohammad Amir : Thank you very much! 🙏 May 17, 2025 at 1:24 AM, Yena Valerii : pls come to anode slitt 1, need help with transfer conveyor May 17, 2025 at 1:42 AM, Farkas Dániel Elekt : Anod slitt 1 meg mindig fentall a problema May 17, 2025 at 1:47 AM, Mohammad Amir : @Dániel Hufnágel Please check E0CNVA51_16_138 it is OOS and it has blocked empty trays delivery to Slitter -1. Thank you very much! May 17, 2025 at 2:18 AM, Hári Zoltàn : Technikus segítséget kérnék a fóliaraktárhoz! Nem tudunk fóliát kivenni valamiért! Köszi! May 17, 2025 at 3:41 AM, Mohammad Amir : @Dániel Hufnágel Please check E0STKA34_C01 there is Load Collapse error. Thank you very much! May 17, 2025 at 3:42 AM, Dániel Hufnágel : On my way May 17, 2025 at 4:42 AM, Majláth Martin : Sziasztok! Catod press 2 re szeretnék segítséget kérni. Köszönöm! May 17, 2025 at 5:35 AM, Mohammad Amir : @FA Please check one job is pending because E1CTC010_P01 is OOS. Is there no production at E1CTC010? Thank you very much! May 17, 2025 at 5:37 AM, Dániel Hufnágel : Delete that job please, we still do not use foil AGV.s May 17, 2025 at 5:37 AM, Dániel Hufnágel : Thank you(thumbsup)(thumbsup)(thumbsup) May 17, 2025 at 5:38 AM, Mohammad Amir : You are welcome! May 17, 2025 at 5:39 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! May 17, 2025 at 6:12 AM, 김대호 (Kim Dae Ho) : Cathode press 3 Please check the L/R May 17, 2025 at 6:14 AM, duzzaman Md (MCS) : Good morning! There's no active LR. The last LR was received at 1:29 am. May 17, 2025 at 6:17 AM, 김대호 (Kim Dae Ho) : Hello! What’s the problem? There are more than 100 standby rolls... May 17, 2025 at 6:18 AM, duzzaman Md (MCS) : Checking May 17, 2025 at 6:27 AM, duzzaman Md (MCS) : At 1:32, there was an operation initiated action to cancel the transfer for RBC0492. Which was cancelled successfully at 1:32. Please raise LR again. There's no active LR May 17, 2025 at 6:30 AM, 김대호 (Kim Dae Ho) : The buffer is empty. Then doesn't it automatically signal? May 17, 2025 at 6:32 AM, duzzaman Md (MCS) : Because it was cancelled by the operator, you have to do it press LR this time. May 17, 2025 at 6:33 AM, duzzaman Md (MCS) : Only this time. Afterwards process would resume to normal May 17, 2025 at 6:34 AM, 김대호 (Kim Dae Ho) : Hm..ok I sent both Units 3 and 4. Please check it out! May 17, 2025 at 6:39 AM, duzzaman Md (MCS) : AGV14 HAS BEEN ASSIGNED FOR UNIT 3 May 17, 2025 at 6:41 AM, 김대호 (Kim Dae Ho) : Thank you 👍 May 17, 2025 at 6:41 AM, duzzaman Md (MCS) : Also for Unit 4, job has been created. May 17, 2025 at 6:59 AM, Baek Hojong(백호종)FA : Day shift 05.17 06:00-18:00 Baek hojong Elec Cho Sung Jun Assem GF CHOI Myoungwoon Assem 1F Kim jeong hul May 17, 2025 at 7:04 AM, duzzaman Md (MCS) : This message was deleted. May 17, 2025 at 7:05 AM, duzzaman Md (MCS) : @FA Could you check this port E1PRC030_P01 Everything is okay from MCS/RTD side. We're not receiving LR from this port. Perhaps resetting the port might help or please check if there are some other issues. Thank you! May 17, 2025 at 7:08 AM, duzzaman Md (MCS) : Dear @Baek Hojong(백호종)FA PM, could you please guide on this issue. A reset might help. Thank you. May 17, 2025 at 7:08 AM, duzzaman Md (MCS) : This message was deleted. May 17, 2025 at 7:10 AM, 김대호 (Kim Dae Ho) : 양극 프레스 2호기 R/W 이재기 에러 발생으로 메뉴얼 사용중입니다. FA측 대응중이나, 조치지연 되고있는데 확인 부탁드립니다. 또한 양극 프레스 3호기 L/R 신호가 없다고하는데 같이 확인 부탁드립니다. @Baek Hojong(백호종)FA May 17, 2025 at 7:11 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 cs인원 출근하고 있는데 조금 기다려주세요 May 17, 2025 at 7:12 AM, Skwarek Tibor : Port been reseted. There wasn t any error. May 17, 2025 at 7:12 AM, duzzaman Md (MCS) : Issue has been resolved. RBC0488 will be delivered. We got HCACK 0 reply from MCS. May 17, 2025 at 7:14 AM, 김대호 (Kim Dae Ho) : 네 감사합니다. May 17, 2025 at 7:38 AM, KIM SEYEON [김세연]_FA : 조장님 혹시 양프2호기 이져기 에러명이 뭔지 알수 있을까요? May 17, 2025 at 7:43 AM, 김대호 (Kim Dae Ho) : 백호종 Pm님이 연락주신다고 하셨습니다! May 17, 2025 at 8:14 AM, Baek Hojong(백호종)FA : @김대호 (Kim Dae Ho) 조장님 양극 프레스 2호기 RW 조치완료되었으니 사용해보시고 문제 있을시 연락주세요 May 17, 2025 at 8:17 AM, 김대호 (Kim Dae Ho) : 네 알겠습니다. 감사합니다!! May 17, 2025 at 8:51 AM, 지찬우 : 양극프레스 2호기 R/W 이재기 에러 재발생 했습니다 조치 부탁드립니다 @김대호 (Kim Dae Ho) @Baek Hojong(백호종)FA May 17, 2025 at 8:52 AM, Baek Hojong(백호종)FA : 지금 가겠습니다 May 17, 2025 at 8:54 AM, Viczai Tamás : Electrode CA Press 2 RW: transzfer X- axis position detect sensor error. Segítséget kérek hozzá. May 17, 2025 at 9:01 AM, Oláh Rajmund : Gyertek legyszives anode press 2 U/W robot hiba Koszonom May 17, 2025 at 9:22 AM, Skwarek Tibor : Kész May 17, 2025 at 9:44 AM, 김대호 (Kim Dae Ho) : Anode press 2 Please check the R/W SERVO PACK alarm @Fa May 17, 2025 at 9:44 AM, Viczai Tamás : Megyünk May 17, 2025 at 10:10 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @sktp 조장님 제가 10시반까지 코터라인 가보고 agv 사용여부 말씀드리겠습니다. May 17, 2025 at 10:43 AM, Czél Tamás : Sziasztok Katód Slitt 2-ről a 2nd RW-ről nem veszi le az anyagot a robot. Kérlek nézzétek meg Köszönöm May 17, 2025 at 10:44 AM, Skwarek Tibor : Megyünk May 17, 2025 at 11:01 AM, Yanina : Sziasztok, Anód press 2 probléma transzfer R/W May 17, 2025 at 11:02 AM, Viczai Tamás : Megyünk May 17, 2025 at 11:03 AM, Yanina : Anód press 1 probléma transzfer R/W May 17, 2025 at 11:23 AM, 김대호 (Kim Dae Ho) : Anode sliter 5 The robot does not respond to the U/R signal. @Fa May 17, 2025 at 11:24 AM, KIM SEYEON [김세연]_FA invited 조성준/samkoo/공정-FA. May 17, 2025 at 11:24 AM, Skwarek Tibor : Checking May 17, 2025 at 11:24 AM, waseem/ Iváncsa Fa : @Saki /Iváncsa Fa May 17, 2025 at 11:25 AM, KIM SEYEON [김세연]_FA : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 11:25 AM, KIM SEYEON [김세연]_FA : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 11:26 AM, waseem/ Iváncsa Fa invited Saki /Iváncsa Fa. May 17, 2025 at 11:27 AM, waseem/ Iváncsa Fa : @Saki /Iváncsa Fa May 17, 2025 at 11:31 AM, KIM SEYEON [김세연]_FA : @FA TECHNICIANS there is a problem at coater line 2 2nd rw alarm name is s/w push abnormal May 17, 2025 at 11:38 AM, Simon Attila F. A. : Done. May 17, 2025 at 11:38 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 양극 1.2라인 AGV 모드로 사용중입니다. 모니터링하겠습니다. May 17, 2025 at 11:43 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 코터 샘플링하고 비닐덮고 바코드붙이고 UR까지 10분이 걸렸습니다. 능숙한 작업자는 5분정도면 끝내는데 좀 더 빨리 완료하면 좋겠습니다. AGV문제가 생기면 대처할 시간을 벌기 위함입니다. May 17, 2025 at 11:43 AM, KIM SEYEON [김세연]_FA : @🌌Lilla(한소라)🌠 번역부탁해요 May 17, 2025 at 11:46 AM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon coater line 1 rw 2 agv is not assigned please check May 17, 2025 at 11:47 AM, 지찬우 : 양극프레스 2호기 R/W 이재기 정상작동 했습니다 조치 감사합니다 May 17, 2025 at 11:50 AM, 🌌Lilla(한소라)🌠 : @서지원 PM Coater mintavétel, fólia felhelyezés és vonalkód ragasztás az UR-ig 10 percbe telt. A tapasztalt operátorok kb 5 perc alatt kész vannak. Jó lenne, ha még egy kicsivel gyorsabban kész tudnának lenni. AGV hiba esetén ezzel időt tudnánk nyerni. May 17, 2025 at 11:52 AM, duzzaman Md (MCS) : CA CT L1 VC 04 JST DEPARTED. CHECKING AN side May 17, 2025 at 11:54 AM, duzzaman Md (MCS) : CA CT VC17 has departed at 11:49 Anode side ports are out of service. May 17, 2025 at 11:55 AM, KIM SEYEON [김세연]_FA : got it May 17, 2025 at 11:55 AM, waseem/ Iváncsa Fa : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 11:56 AM, Saki /Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 12:04 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_06_006/007 it is OOS , INV 01 RUNTIME OVER ERROR Thank you very much! May 17, 2025 at 12:18 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 12:20 PM, waseem/ Iváncsa Fa : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 12:41 PM, waseem/ Iváncsa Fa : At 12:40 Coater line 1 rw is no use of agv Because of the first batch sampling May 17, 2025 at 12:48 PM, waseem/ Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 1:01 PM, waseem/ Iváncsa Fa : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 1:22 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 1:22 PM, Skwarek Tibor : E1SLC030-TR03 nem lehet ráadni a szervot. Hibaüzenet nincs. Korábban fényfüggöny miatt kapcsolt le a szervo, de nem tudjuk visszakapcsolni. Segítséget szeretnénk kérni. May 17, 2025 at 1:36 PM, 오승주 : 안녕하세요 코팅 양극 2라인 1R/w 이재기 조치사항 공유좀 부탁드려도 될까요? May 17, 2025 at 1:38 PM, waseem/ Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - not success Error: Retry count exceeds Solve manually. May 17, 2025 at 1:38 PM, KIM SEYEON [김세연]_FA : @오승주 어제 확인해보니 이재기는 문제가 없었습니다. 보빈딸려옴 현상이 있었습니다. 보빈이 브라켓 사이로 들어갔었네요. 사진 공유받았습니다. May 17, 2025 at 1:38 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 3호기 이재기 릴 뜬채로 멈춰있습니다. Fa분들 조치 지연으로 설비 약 1시간 비가동 발생중인데 지원부탁드립니다. @Baek Hojong(백호종)FA May 17, 2025 at 1:38 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check it May 17, 2025 at 1:39 PM, KIM SEYEON [김세연]_FA invited 이명해. May 17, 2025 at 1:39 PM, KIM SEYEON [김세연]_FA : @JAEYOON KIM / CS 매니저님 확인 부탁드립니다. May 17, 2025 at 1:39 PM, 오승주 : 그럼 브라켓 쪽이 문제였던걸까요? May 17, 2025 at 1:45 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 1:46 PM, KIM SEYEON [김세연]_FA : 보빈딸려옴이 문제입니다. May 17, 2025 at 1:47 PM, 오승주 : 네 알겠습니다 감사합니다. May 17, 2025 at 1:56 PM, 김주연 : @Baek Hojong(백호종)FA pm님 현재 조치상태 확인해주시고, 가능하면 보빈 현 위치, 실물위치 컨펌해주신 후 mcs rtd 에 요청주세욥 May 17, 2025 at 2:37 PM, 김주연 : @Baek Hojong(백호종)FA 피엠님 코터 호기랑 포트명 알려주시고 현상 확인하셔서 cs, mcs 쪽에 조치방법 문의주세요 May 17, 2025 at 2:50 PM, 김대호 (Kim Dae Ho) : Anode slitter 1 Please check the L/R @duzzaman Md (MCS) May 17, 2025 at 2:53 PM, duzzaman Md (MCS) : There is active LR but no search lot May 17, 2025 at 2:54 PM, 김대호 (Kim Dae Ho) : Ok... May 17, 2025 at 3:19 PM, waseem/ Iváncsa Fa : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 3:39 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1 - success coater line 2 rw 2 - success May 17, 2025 at 3:49 PM, waseem/ Iváncsa Fa : (result) coater line 1 rw 1 - success coater line 2 rw 1 - success May 17, 2025 at 4:06 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1set- success (770) coater line 2 rw 2nd - success(830) May 17, 2025 at 4:10 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1set- success (1220) coater line 2 rw 2nd - success(1422) May 17, 2025 at 4:18 PM, waseem/ Iváncsa Fa : (result) pv coater line 1 rw 1 - success(1280 ) coater line 2 rw 1 -success(1240 ) May 17, 2025 at 4:36 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1set- success (1001) coater line 2 rw 2nd - success(1078) May 17, 2025 at 4:45 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 여기에 있는 success (괄호안)은 작업자가 샘플링 작업 다하고 UR누른 시간입니다. 14분 넘어 누르기도 합니다. 2라인의 경우 터렛 로테이션 시간이 24분인데 시간이 너무 짧습니다. 1라인은 터렛 로테이션 시간이 26분인데 2라인도 바꿀수 있을까요? 그리고 작업자분들도 좀 더 빨리 UR눌러야합니다. 시간이 촉박하면 문제 발생시 대처시간이 없습니다.. May 17, 2025 at 4:47 PM, Kim Dongju(김동주)_FA : 슬리터 3호기 조치 완료 되었습니다. 생산 진행하셔도 됩니다. May 17, 2025 at 4:48 PM, 서지원 : 1라인은 슬리터에서 권취량 1000m 변경후에 코터쪽에서도 3000m 늘린 상황이고, 아직 2라인에 대해서는 슬리터 권취량 증가 테스트 안해봐서 그거 결과보고 늘릴생각입니다. May 17, 2025 at 4:53 PM, 김대호 (Kim Dae Ho) : 감사합니다! May 17, 2025 at 4:57 PM, waseem/ Iváncsa Fa : (result) pv coater line 1 rw 1 - success(700 ) coater line 2 rw 1 -success(it's roll not in the buffer due to the agv Retry exceed solved manually ) May 17, 2025 at 4:58 PM, KIM SEYEON [김세연]_FA : good agv retry exceed then pull out the roll manually May 17, 2025 at 5:09 PM, Saki /Iváncsa Fa : coater line 2 rw 1set- and coater line 2 rw 2nd : precise loading May 17, 2025 at 5:12 PM, waseem/ Iváncsa Fa : (result) pv coater line 1 rw 1 - success( 670 ) coater line 2 rw 1 -success( 680 ) May 17, 2025 at 5:17 PM, Saki /Iváncsa Fa : (result) coater line 2 rw 1set- manual offloaded coater line 2 rw 2nd - manual offloaded May 17, 2025 at 5:21 PM, KIM SEYEON [김세연]_FA : what is the problem? May 17, 2025 at 5:21 PM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 코터2라인 precise loading 이 뭔가요? May 17, 2025 at 5:22 PM, 김태현 : 코팅 로딩불량나와서 일단 수동으로 뺐습니다. May 17, 2025 at 5:22 PM, 김태현 : 정권짧아서 수동으로 롤뺐습니다 May 17, 2025 at 5:30 PM, KIM SEYEON [김세연]_FA : 네 알려주셔서 감사합니다 May 17, 2025 at 5:43 PM, waseem/ Iváncsa Fa : (result) pv coater line 1 rw 1 - success(800 ) coater line 2 rw 1 -success( 800 ) May 17, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs, Novák Károly Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 17, 2025 at 6:05 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 17, 2025 at 6:10 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. Samkoo Lee Minjae 2.Samkoo Choi Gisu May 17, 2025 at 6:23 PM, waseem/ Iváncsa Fa : @Hakim/Ivancsa FA May 17, 2025 at 6:24 PM, Hakim/Ivancsa FA : Yes May 17, 2025 at 6:25 PM, waseem/ Iváncsa Fa : @Osman/ "Ivancsa FA" May 17, 2025 at 6:33 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) coater line 2 rw 1 agv is not assigned May 17, 2025 at 6:36 PM, Shakir (MCS) : Hello sir For Coater line 2, E1CTC020 AGV17 has been assigned. Thank you May 17, 2025 at 6:38 PM, Shakir (MCS) : AGV17 has been departed May 17, 2025 at 6:38 PM, KIM SEYEON [김세연]_FA : (result) pv coater line 2 rw 1 - success(800 ) coater line 2 rw 2 -success( 800 ) May 17, 2025 at 6:50 PM, Semenszki Péter : Sziasztok! A fólia raktárhoz kitudnátok jönni? May 17, 2025 at 6:50 PM, Oláh András : Megyünk May 17, 2025 at 6:50 PM, Semenszki Péter : Ok köszi May 17, 2025 at 6:50 PM, KIM SEYEON [김세연]_FA : @FA TECHNICIANS PLEASE COME TO COATER LINE 1 May 17, 2025 at 6:51 PM, Oláh András : Coming May 17, 2025 at 6:51 PM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1 - success(600) coater line 1 rw 2-success( 600 ) May 17, 2025 at 6:52 PM, Hakim/Ivancsa FA invited Osman/ "Ivancsa FA". May 17, 2025 at 7:12 PM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1 - success(220) coater line 2 rw 2-success( 200 ) May 17, 2025 at 7:35 PM, Osman/ "Ivancsa FA" : (result) pv coater line 1 rw 1 - success(500) coater line 1 rw 2-success( 400 ) May 17, 2025 at 7:36 PM, Shakir (MCS) : @FA Please check Ca Roll stk C32 “Hoist exact position error after forking “ Thank you May 17, 2025 at 7:38 PM, Szabadi Miki : Done May 17, 2025 at 7:53 PM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1 - success(400) coater line 1 rw 2-success( 300 ) May 17, 2025 at 7:57 PM, Osman/ "Ivancsa FA" : (result) coater line 1 rw 1 - working manually success coater line 1 rw 2- working manually success May 17, 2025 at 8:05 PM, Somoskövy Martin : Sziasztok. Anode Slitt 1-en megálltak a reel levevőkarok. Megnéznétek? Köszönöm. May 17, 2025 at 8:09 PM, Szabadi Miki : Megyünk May 17, 2025 at 8:31 PM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1 - success(600) coater line 1 rw 2-success( 700 ) May 17, 2025 at 8:33 PM, Osman/ "Ivancsa FA" : (result) pv coater line 1 rw 1 - working manually success coater line 1 rw 2-success( 700 ) May 17, 2025 at 9:08 PM, Yena Valerii : hi, please come to cathode press 2, need help with R/W May 17, 2025 at 9:08 PM, Szabadi Miki : Comin May 17, 2025 at 9:15 PM, 장정훈 : @FA Anod agv 18 please check! Pos cont heading error May 17, 2025 at 9:15 PM, 최기수(GI SU CHOI) : (result) pv coater line 1 rw 1 - success(400) coater line 1 rw 2 - success(400) May 17, 2025 at 9:23 PM, Oláh András : @Erik Gerzsenyi gyere légyszíves anod slitt5-höz May 17, 2025 at 9:26 PM, Erik Gerzsenyi : Nemtudok May 17, 2025 at 9:26 PM, Erik Gerzsenyi : Nochingon vagyok az emeleten May 17, 2025 at 9:26 PM, Erik Gerzsenyi : Mi a baj? May 17, 2025 at 9:27 PM, Oláh András : Majd beszéljünk nem sos May 17, 2025 at 9:27 PM, Erik Gerzsenyi : Oksa May 17, 2025 at 9:30 PM, Osman/ "Ivancsa FA" : (result) pv coater line 1 rw 1 - success(800) coater line 1 rw 2-success( 700 ) May 17, 2025 at 9:46 PM, 최기수(GI SU CHOI) : (result) pv coater line 1 rw 1 - success(400) coater line 1 rw 2 - success(400) May 17, 2025 at 9:58 PM, 최기수(GI SU CHOI) : Correction: this is line 2 May 17, 2025 at 9:59 PM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1 - success(600) coater line 2 rw 2-success( 600 ) May 17, 2025 at 10:08 PM, Farkas Dániel Elekt : Sziasztok Coating anod2 rol kuldjetek el kerlek az agvket mert utban vannak Beallitas lesz es a scrappeket manualba kell levennunk a geprol May 17, 2025 at 10:08 PM, Dániel Hufnágel : Egy pillanat May 17, 2025 at 10:08 PM, Dániel Hufnágel : Sos? May 17, 2025 at 10:15 PM, 최기수(GI SU CHOI) : (result) pv coater line 1 rw 1 - success(300) coater line 1 rw 2 - success(400) May 17, 2025 at 10:24 PM, Shakir (MCS) : @FA Please check Ca Roll stk C32 “Hoist exact position error after forking “ Thank you May 17, 2025 at 10:26 PM, Dániel Hufnágel : Done May 17, 2025 at 10:30 PM, Hakim/Ivancsa FA : (result) pv coater line 2 rw 1 - success(630) coater line 2 rw 2-success( 720 ) May 17, 2025 at 10:31 PM, Farkas Dániel Elekt : Fel ora kb de utana utban lesz May 17, 2025 at 10:33 PM, Dániel Hufnágel : 16 ost már elvittem! May 17, 2025 at 10:46 PM, 최기수(GI SU CHOI) : (result) pv coater line 1 rw 1 - success(500) coater line 1 rw 2 - success(500) May 17, 2025 at 10:46 PM, Farkas Dániel Elekt : Koszii May 17, 2025 at 10:49 PM, Turianytsia Olesia : Elakadt AGV Cathode slitt 3 May 17, 2025 at 10:59 PM, Turianytsia Olesia : Nem vesz anyagot az A oldal R/W felől cathode slitt 2 May 17, 2025 at 11:00 PM, Hakim/Ivancsa FA : (result) pv coater line 2 rw 1-success(1100) coater line 2 rw 2-success( 800) May 17, 2025 at 11:00 PM, Oláh András : Lassan érkezünk, porról jövünk May 17, 2025 at 11:26 PM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(700) coater line 1 rw 2-success( 700) May 17, 2025 at 11:26 PM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success(600) coater line 2 rw 2-success( 600) May 17, 2025 at 11:55 PM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success( 600) coater line 2 rw 2-success( 600) May 17, 2025 at 11:55 PM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(550) coater line 1 rw 2-success( 550) May 18, 2025 at 12:08 AM May 18, 2025 at 12:08 AM, Yena Valerii : pls come to anode press 4 May 18, 2025 at 12:08 AM, Szabadi Miki : Comin May 18, 2025 at 12:21 AM, Hakim/Ivancsa FA : This message was deleted. May 18, 2025 at 12:26 AM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success( 650) coater line 2 rw 2-success( 740) May 18, 2025 at 12:27 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(650) coater line 1 rw 2-success( 1000) May 18, 2025 at 12:53 AM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success( 700) coater line 2 rw 2-success( 610) May 18, 2025 at 12:58 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(800) coater line 1 rw2-success( 900) May 18, 2025 at 1:24 AM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success(1400) coater line 2 rw 2- working manually success. May 18, 2025 at 1:27 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(650) coater line 1 rw2-success( 850) May 18, 2025 at 1:47 AM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success( 900) coater line 2 rw 2-success(1200) May 18, 2025 at 2:03 AM, Erik Gerzsenyi : Sziasztok Katod slitt 1-2 nincsen ures talcank May 18, 2025 at 2:03 AM, Erik Gerzsenyi : Raneznetek legyszives? Koszonom May 18, 2025 at 2:04 AM, Szabadi Miki : 🤓 May 18, 2025 at 2:09 AM, Osman/ "Ivancsa FA" : (result) pv coater line 2 rw 1-success( 700) coater line 2 rw 2-success(1100) May 18, 2025 at 2:10 AM, Shakir (MCS) : Currently 13 jobs assigned to CNV but STK is busy. Thank you May 18, 2025 at 2:10 AM, Szabadi Miki : Thank you! May 18, 2025 at 2:13 AM, Osman/ "Ivancsa FA" : Currently coater line 2 rw 1 and coater line 2 rw 2 is off. May 18, 2025 at 2:27 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(500) coater line 1 rw2-success( 600) May 18, 2025 at 2:48 AM, Shakir (MCS) : For your information:- Now CNVC51 is filled with empty trays ✅. Thank you very much! May 18, 2025 at 3:00 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(940) coater line 1 rw2-success( 770) May 18, 2025 at 3:31 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(770) coater line 1 rw2-success( 740) May 18, 2025 at 3:58 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(500) coater line 1 rw2-success( 520) May 18, 2025 at 4:28 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(630) coater line 1 rw2-success( 500) May 18, 2025 at 5:00 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-success(450) coater line 1 rw2-success( 630) May 18, 2025 at 5:30 AM, Hakim/Ivancsa FA : (result) pv coater line 1 rw 1-succe4ss(830) coater line 1 rw2-success( 580) May 18, 2025 at 6:23 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.18 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assey GF OH Eunhyang 1F Kim Jongwon May 18, 2025 at 7:32 AM, Mr Park 박민성 invited usman/vancsa FA. May 18, 2025 at 7:35 AM, usman/vancsa FA : Hello May 18, 2025 at 7:36 AM, usman/vancsa FA : I am recently added in this group so I will share previous results now May 18, 2025 at 7:36 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-success(119) coater line 1 rw2-success(128) May 18, 2025 at 7:36 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-success(72) coater line 1 rw2-success(164) May 18, 2025 at 7:36 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-manual loading due to mes problem coater line 1 rw2- manual loading due to mes problem May 18, 2025 at 7:55 AM, usman/vancsa FA : This message was deleted. May 18, 2025 at 8:00 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-success(74) coater line 1 rw2-success(71) May 18, 2025 at 8:37 AM, Simon Attila F. A. : @mcs please check, why not go agv to the ca ct1 port2 and port 3. Do you see any problem? May 18, 2025 at 8:38 AM, Simon Attila F. A. : E1CTC010_P2 AND P3 May 18, 2025 at 8:43 AM, duzzaman Md (MCS) : There's a carrier location mismatch error for both the ports May 18, 2025 at 8:44 AM, Simon Attila F. A. : Thanks, we check. May 18, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : @서지원 피엠님 방금 발생했던 문제 해결을 위해서는 pnt제어와 c&c제어와 확인이 필요합니다. 예전에 슬리터에서 문제됐던건데, pnt설비에서 c&c이재기로 캐리어 ID넘겨줄때 미스매치 발생하는것 같습니다. May 18, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : 우선 수동배출했는데 확인 필요합니다. May 18, 2025 at 9:22 AM, 김태현 : 지금 양극1라인 수동배출하고 Roll 리와인더에 Roll생성됫는데 AGV불러봐도되나요? May 18, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA : 네 다시 해보세요 May 18, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA : 캐리어 아이디가 뭔가요? May 18, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA : 공유해주세요 May 18, 2025 at 9:24 AM, KIM SEYEON [김세연]_FA : RW 1ST 2ND 둘다요 May 18, 2025 at 9:24 AM, 김태현 : 현장에 상주하고있는 FA분이랑 얘기했고 1st만 일단 불러보기로했습니다. May 18, 2025 at 9:26 AM, KIM SEYEON [김세연]_FA : 캐리어아이디 알려주세요 May 18, 2025 at 9:27 AM, Baek Hojong(백호종)FA : RBC0514 RBC0515 입니다 피엠님 May 18, 2025 at 9:27 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir is the carrier ID in the roll storage? please check May 18, 2025 at 9:29 AM, 서지원 : 이거 금요일에도 캐리어Id 중복으로 잡생성 안된케이스 있길래 MES상에서 어제 제가 양극 캐리어Id 일괄폐기 4000개 이상 했는데 그런데도 동일한 현상이 생긴건가요???? May 18, 2025 at 9:30 AM, duzzaman Md (MCS) : RBC0514 ROLL STORAGE C31, Unit: 0100407 RBC0515 E0JGVC01_V19 May 18, 2025 at 9:42 AM, Simon Attila F. A. : Now see, thanks you for help. May 18, 2025 at 10:33 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-success(1045) coater line 1 rw2-manual loading May 18, 2025 at 11:36 AM, usman/vancsa FA : (result) pv coater line 1 rw 1-success(923) coater line 1 rw2-success(890) May 18, 2025 at 11:52 AM, usman/vancsa FA : Last electrode length is 3001.8m May 18, 2025 at 12:06 PM, usman/vancsa FA : (result) pv Length of electrode is 3001.8m coater line 1 rw 1-success(817) coater line 1 rw2-success(710) May 18, 2025 at 12:30 PM, usman/vancsa FA : This message was deleted. May 18, 2025 at 12:34 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 이거 MES에서 코터 워크? 시작과 컴플리트가 있는데 컴플리트가 늦어져서 뭔가 변경점이 있었습니다. 우선 시작과 컴플리트가 30분보다 오래 걸릴경우 다음롤도 수동으로 빼달라고 했고, PNT 제어분이랑 내일 같이 확인하자고 했습니다. May 18, 2025 at 12:36 PM, usman/vancsa FA : (result) pv Length of electrode is 3001.8m coater line 1 rw 1-success(753) coater line 1 rw2-success(778) May 18, 2025 at 1:19 PM, usman/vancsa FA : (result) pv Length of electrode is 2456.3m coater line 1 rw 1-success(635) coater line 1 rw2-success(998) May 18, 2025 at 1:30 PM, usman/vancsa FA : (result) pv Length of electrode is 3001.8m coater line 1 rw 1-success(662) coater line 1 rw2-success(865) May 18, 2025 at 1:59 PM, Saki /Iváncsa Fa : (result) pv Length of electrode is 3001.8m coater line 1 rw 1-success(707) coater line 1 rw2-success(814) May 18, 2025 at 2:29 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(602) coater line 1 rw2-success(630) May 18, 2025 at 2:38 PM, FACS_Bareum kim : 좋아 May 18, 2025 at 2:49 PM, FACS_Bareum kim : 죄송합니다. 잘못 눌렸습니다. May 18, 2025 at 3:03 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(782) coater line 1 rw2-success(989) May 18, 2025 at 3:29 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(741) coater line 1 rw2-success(806) May 18, 2025 at 4:01 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(776) coater line 1 rw2-success(815) May 18, 2025 at 4:23 PM, Saki /Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(manual) coater line 1 rw2-success(manual) May 18, 2025 at 5:03 PM, Saki /Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(779) coater line 1 rw2-success(781) May 18, 2025 at 5:32 PM, Saki /Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(712) coater line 1 rw2-success(753) May 18, 2025 at 5:54 PM, Saki /Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(656) coater line 1 rw2-success(687) May 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13+1 Overtime Overtime (1): Denkó János Sick (2):Kiss Balázs, Magyar Balázs Holiday (0):- Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Novák Károly Modul(3): Martina Dávid, Nagy Gábor, Denkó János May 18, 2025 at 6:04 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 18, 2025 at 6:13 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. Samkoo Lee Minjae 2.Samkoo Choi Gisu May 18, 2025 at 6:25 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(780) coater line 1 rw2-success(600) May 18, 2025 at 6:26 PM, 최기수(GI SU CHOI) : . May 18, 2025 at 6:53 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(590) coater line 1 rw2-success(530) May 18, 2025 at 7:21 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(650) coater line 1 rw2-success(640) May 18, 2025 at 7:39 PM, waseem/ Iváncsa Fa : This message was deleted. May 18, 2025 at 7:40 PM, waseem/ Iváncsa Fa : E1CTC010-TR01 Coater line 1 is Stop May 18, 2025 at 7:48 PM, 최기수(GI SU CHOI) : @FA Please check Anod agv 18 Pos cont heading error May 18, 2025 at 7:50 PM, Szabadi Miki : Comin May 18, 2025 at 8:30 PM, Hári Zoltàn : Sziasztok! Technikust kernek az anod 5 roll raktarhoz! Nem tudjuk bekuldeni a rollt! Köszi! May 18, 2025 at 8:30 PM, Oláh András : Megyünk May 18, 2025 at 8:34 PM, Szabadi Miki : Kész a daru vissza lett kapcsolva jön valaki visszaküldeni ? May 18, 2025 at 8:55 PM, Erik Gerzsenyi : Ca press 2 a 14-es agv kiallt hibara May 18, 2025 at 8:55 PM, Erik Gerzsenyi : Semmi May 18, 2025 at 8:56 PM, Erik Gerzsenyi : Magahoz tert May 18, 2025 at 8:56 PM, Erik Gerzsenyi : 😁 May 18, 2025 at 8:56 PM, Oláh András : Solved 👍😁 May 18, 2025 at 9:31 PM, Turianytsia Olesia : Elakadt AGV Cathode slitt 1 May 18, 2025 at 9:31 PM, Szabadi Miki : Megyünk May 18, 2025 at 10:16 PM, Yena Valerii : come to anode press 4 pls May 18, 2025 at 10:18 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_013/012 it is OOS , INV 01 RUNTIME OVER ERROR Thank you very much! May 18, 2025 at 10:19 PM, Turianytsia Olesia : A szállítószalag megállt. Cathode slitt May 18, 2025 at 10:20 PM, Szabadi Miki : Úton vagyunk May 18, 2025 at 10:22 PM, 최기수(GI SU CHOI) : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(720) coater line 1 rw2-success(500) May 18, 2025 at 10:25 PM, 김지수PM(Gyuri)_FA : @FA please check E0CNVC51 track 8013, 8012 May 18, 2025 at 10:25 PM, Oláh András : Checking May 18, 2025 at 10:28 PM, Oláh András : Solved 👍 May 18, 2025 at 10:34 PM, Majláth Martin : Sziasztok! Catod press 1 re szretnék segítségte kérni. Ködzönöm! May 18, 2025 at 10:34 PM, Szabadi Miki : Megyünk May 18, 2025 at 10:51 PM, Yena Valerii : again pls, robot puts material in incorrect position on Puffer May 18, 2025 at 10:52 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(645) coater line 1 rw2-success(648) May 18, 2025 at 11:21 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(600) coater line 1 rw2-success(615) May 18, 2025 at 11:48 PM, Somoskövy Martin : Sziasztok. Anode Press 3-on a robotkar ferdén rakta a Buffer-re az anyagot. Megnéznétek? Köszönöm. May 18, 2025 at 11:49 PM, Szabadi Miki : Megyünk May 18, 2025 at 11:51 PM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(565) coater line 1 rw2-success(600) May 19, 2025 at 12:00 AM May 19, 2025 at 12:00 AM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(700) coater line 2 rw 2-success(700) May 19, 2025 at 12:11 AM, Mr Park 박민성 invited Faisal / Ivancsa FA. May 19, 2025 at 12:21 AM, Hári Zoltàn : Anód 2 -re kérnék technikust! 2es rw-re nem jön az agv! Köszi! May 19, 2025 at 12:21 AM, Oláh András : Már megyünk is May 19, 2025 at 12:22 AM, Hári Zoltàn : Elindult ha jól látom. Külföldiek ügyködtek valamit. May 19, 2025 at 12:23 AM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(815) coater line 1 rw2-success(588) May 19, 2025 at 12:35 AM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(880) coater line 2 rw 2-success( manually pull out roll) May 19, 2025 at 1:02 AM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(pull out manually) coater line 1 rw2-success(pull out manually) May 19, 2025 at 1:04 AM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(700) coater line 2 rw 2-success( 725) May 19, 2025 at 1:29 AM, 최기수(GI SU CHOI) : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(700) coater line 1 rw 2 - success(800) May 19, 2025 at 1:34 AM, Yena Valerii : pls come to anode pres 3 May 19, 2025 at 1:35 AM, Oláh András : Mindjárt megyünk May 19, 2025 at 1:38 AM, Yena Valerii : Has anyone already solved this problem, thanks May 19, 2025 at 1:38 AM, Oláh András : Okay ty May 19, 2025 at 1:45 AM, 최기수(GI SU CHOI) : pls come to anode pres 3 Same error May 19, 2025 at 1:47 AM, Szabadi Miki : Comin May 19, 2025 at 1:55 AM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(518) coater line 1 rw2-success(490) May 19, 2025 at 2:09 AM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(600) coater line 2 rw 2-success(700) May 19, 2025 at 2:25 AM, Faisal / Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(545) coater line 1 rw2-success(490) May 19, 2025 at 2:42 AM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(900) coater line 2 rw 2-success(850) May 19, 2025 at 2:51 AM, Yena Valerii : please check if there is material in stock which is intended for 1 slit anode May 19, 2025 at 2:53 AM, Shakir (MCS) : There is No Lot available for Slitt1 Anode Thank you May 19, 2025 at 2:55 AM, Yena Valerii : thanks May 19, 2025 at 2:55 AM, Faisal / Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(488) coater line 1 rw2-success(540) May 19, 2025 at 2:57 AM, Shakir (MCS) : LR received successfully at 1:25 as soon as materials will be available jobs will be created as there is already an active LR. Thank you May 19, 2025 at 3:05 AM, waseem/ Iváncsa Fa : @FA tecnician Come in coating anode plz May 19, 2025 at 3:05 AM, Oláh András : Comin May 19, 2025 at 3:07 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_049/050 it is OOS , INV RUNTIME OVER ERROR Thank you very much! May 19, 2025 at 3:14 AM, 최기수(GI SU CHOI) : This message was deleted. May 19, 2025 at 3:15 AM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(800) coater line 2 rw 2-success(600) May 19, 2025 at 3:27 AM, Faisal / Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(672) coater line 1 rw2-success(660) May 19, 2025 at 3:44 AM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(600) coater line 2 rw 2-success(600) May 19, 2025 at 3:57 AM, Majláth Martin : Sziasztok! Catod press 2 re szeretnek segítséget kérni. Köszönöm! May 19, 2025 at 3:57 AM, Szabadi Miki : Megyünk May 19, 2025 at 3:57 AM, Faisal / Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(532) coater line 1 rw2-success(705) May 19, 2025 at 4:00 AM, Yena Valerii : pls come to cathode press 2 May 19, 2025 at 4:18 AM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 2 rw 1-success(750) coater line 2 rw 2-success(600) May 19, 2025 at 4:27 AM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(615) coater line 1 rw2-success(735) May 19, 2025 at 4:28 AM, Somoskövy Martin : Anode Press 4-en ismételten ferdén rakta a Buffer-re a robotkar a rollt. Ránéznétek? Köszönöm. May 19, 2025 at 4:28 AM, Szabadi Miki : Megyünk May 19, 2025 at 4:55 AM, waseem/ Iváncsa Fa : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(525) coater line 1 rw2-success(520) May 19, 2025 at 5:27 AM, Faisal / Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw1-success(666) coater line 1 rw2-success(540) May 19, 2025 at 5:57 AM, Sárvári Márk : Joreggelt. FA kollégák segítségét kérjük a Katód 1 sorra. Fény kapuba belépett a kolléga véletlenül. May 19, 2025 at 6:04 AM, adambenczik : Megyünk May 19, 2025 at 6:08 AM, usman/vancsa FA : Day Shift FA Worker Schedule Date: 25. May. 19 Time: 06:00~18:00 1. @usman/vancsa FA 2. @Tumee May 19, 2025 at 6:17 AM, Powder tréner invited Nazirov Eldar. May 19, 2025 at 6:17 AM, adambenczik : Kész May 19, 2025 at 6:28 AM, 송태용(Song tae yong) : (result) pv-Anode Length of electrode is 2902.8m coater line 2 rw 1-success(850) coater line 2 rw 2-success(700) May 19, 2025 at 6:34 AM, Sárvári Márk : Vissza tudtok jönni? Megint nem jó. Köszi May 19, 2025 at 6:45 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(2129) coater line 1 rw2-success(1110) May 19, 2025 at 7:00 AM, usman/vancsa FA : This message was deleted. May 19, 2025 at 7:05 AM, Tumee : (result) pv-anode Length of electrode is 2902.8m coater line 1 rw 1-success(669) coater line 1 rw2-success(523) May 19, 2025 at 7:08 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3011.9m coater line 1 rw 1-success(823) coater line 1 rw2-success(880) May 19, 2025 at 7:09 AM, 동현 invited 박시우. May 19, 2025 at 7:36 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(968) coater line 1 rw2-success(890) May 19, 2025 at 7:44 AM, Tumee : (result) pv-anode Length of electrode is 2RW1 3260.7m 2RW2 3260.9m coater line 2rw 1-success(manual out) coater line 2rw2-success(1157) May 19, 2025 at 8:04 AM, FACS_JaewonShin : ■ 19th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 19, 2025 at 8:41 AM, Sazzad Bhai SKon : RBA0340 is stored in the STK E0STKA31 (0200202) as UNK carrier. Please remove from manual port and restock May 19, 2025 at 8:41 AM, Sazzad Bhai SKon : @FA May 19, 2025 at 8:46 AM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please do it May 19, 2025 at 8:46 AM, KIM SEYEON [김세연]_FA : thanks May 19, 2025 at 8:46 AM, Farkas Tamàs : Ok May 19, 2025 at 8:50 AM, KIM SEYEON [김세연]_FA : also there was a fire alarm in the anode side any problem? @Farkas Tamàs May 19, 2025 at 8:52 AM, adambenczik : Anód raktárban még lent a függöny May 19, 2025 at 8:53 AM, Farkas Tamàs : No, everyone has been allowed back into the area. Fire curtains are still down. May 19, 2025 at 8:56 AM, KIM SEYEON [김세연]_FA : okay May 19, 2025 at 8:58 AM, adambenczik : Anód coatingon elég meleg van, és nem gyenge szagot is lehet érni May 19, 2025 at 9:08 AM, Fülöp Csaba : Szia Elektróda területen nem lehet egyenlőre tartózkodni senkinek tűz jelzés miatt! May 19, 2025 at 9:08 AM, usman/vancsa FA : Okay May 19, 2025 at 9:56 AM, 김태현 : 코팅 양극1라인 이재기 확인좀해주세요 May 19, 2025 at 9:56 AM, 김태현 : 2번 멈췄습니다 May 19, 2025 at 9:58 AM, FACS_오창훈_CHANGHOON : 현재 작동 중입니다 May 19, 2025 at 9:58 AM, FACS_오창훈_CHANGHOON : AGV 배출했습니다 May 19, 2025 at 10:05 AM, 김태현 : 1번 배출은하고 2번은 멈췄어요 May 19, 2025 at 10:07 AM, 김태현 : 집게발 집은상태에서 멈췄습니다 May 19, 2025 at 10:25 AM, FACS_오창훈_CHANGHOON : 해당 상태 이재기 클램핑한 후 설비 언척킹이 안되는 상황이라서 설비쪽에서 조치중입니다. May 19, 2025 at 11:02 AM, Viczai Tamás : This message was deleted. May 19, 2025 at 11:03 AM, Szappanos Gábor : Sziasztok. Coating anód 1 elöl el kellene állni az agv-vel. Köszi May 19, 2025 at 11:03 AM, Viczai Tamás : Electrode CA Press 3 RW: X Axis position detect sensor error. May 19, 2025 at 11:03 AM, Szappanos Gábor : Nem tudjuk levenni tőlle a jumbót May 19, 2025 at 11:14 AM, Szeitz Flórián : Sziasztok! Anód press 1 R W leszedő robot megállt . Gyertek légyszives köszönöm May 19, 2025 at 11:22 AM, Mohammad Amir : @Viczai Tamás Please check E0CNVA52_06_072 Tray LTA0476 is in wrong position that's why this port is OOS. Thank you very much! May 19, 2025 at 11:24 AM, FACS_오창훈_CHANGHOON : This message was deleted. May 19, 2025 at 11:24 AM, FACS_오창훈_CHANGHOON : X축 도그 센서 위치 조정하여 조치 되었습니다. May 19, 2025 at 11:33 AM, adambenczik : E1PRA040_P02 same problem May 19, 2025 at 12:11 PM, Mohammad Amir : @adambenczik Please check E0STKA51_P03 it is OOs that's why materials recovery has been stopped. And there is a queue of materials on CNVA51. Thank you very much! May 19, 2025 at 12:24 PM, adambenczik : Solved May 19, 2025 at 12:24 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 12:54 PM, Mohammad Amir : @adambenczik Please check E0CNVA51_06_007 it is OOs that's why materials recovery has been stopped from Slitter 1 &2. Thank you very much! May 19, 2025 at 1:00 PM, Viczai Tamás : Solved May 19, 2025 at 1:00 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 1:15 PM, Mohammad Amir : @Viczai Tamás Please check,is there any maintenance going on E0STKA34_C01 ,it is in Open door state for quite a some time. One job is pending. Thank you very much! May 19, 2025 at 1:17 PM, Viczai Tamás : Solved May 19, 2025 at 1:19 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 1:35 PM, Kurgya Attila : Segítséget kérek fólia raktárba. Köszönöm May 19, 2025 at 1:36 PM, adambenczik : Megyek May 19, 2025 at 1:46 PM, (Unknown) : Katód press 2 elött 13-as AGV pozíciót vesztett.megnéznétek?köszi May 19, 2025 at 2:30 PM, 조혜근 : Rolls do not come to the UW of anode presses 3 and 4. Can you check it? May 19, 2025 at 2:31 PM, Mohammad Amir : Checking May 19, 2025 at 2:34 PM, Mohammad Amir : @FA @Viczai Tamás Please check E0STKA35_P01(3020) and P01_BP01(3015) ,these are OOS that's why rolls are not going to Press 3&4 Anode. Thank you very much! May 19, 2025 at 2:36 PM, FACS_오창훈_CHANGHOON : Checked May 19, 2025 at 2:37 PM, Mohammad Amir : Sir, Issue has been resolved ✅ Now rolls on the way to Press Anode 3&4. I am monitoring. Thank you very much! May 19, 2025 at 2:37 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 2:45 PM, Mohammad Amir : AGV#7 on the way to Press Anode -4. Thank you very much! May 19, 2025 at 2:46 PM, 조혜근 : Thank you May 19, 2025 at 2:46 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you need any further assistance. May 19, 2025 at 2:50 PM, adambenczik : @Kurgya Attila elvinnénk az anód raktárból a kék szerszámos szekrényünket. Lennétek szívesek elpakolni onnan? Köszönöm May 19, 2025 at 2:53 PM, Vlad Danilevskyi : Hello. Anode press 4 Avg RW error. Thanks May 19, 2025 at 2:53 PM, (Unknown) : Anód press 3 - kitudnátok jönni? May 19, 2025 at 2:53 PM, Vlad Danilevskyi : UW* May 19, 2025 at 2:53 PM, Viczai Tamás : Megyünk May 19, 2025 at 2:53 PM, (Unknown) : Bocsánat.. 4- re May 19, 2025 at 2:56 PM, adambenczik : Rendben 👍 May 19, 2025 at 2:56 PM, 조혜근 : 음극 프레스 4호기 이재기가 버퍼에 롤을 내려 놓을때 한쪽에 걸려서 비스듬히 내려 놓는 현상 재발생하였는데 임시조치 말고 원인 찾아서 재발생 안되게 조치 가능할까요? May 19, 2025 at 2:58 PM, KIM SEYEON [김세연]_FA : @Lee Junghan(이정한)_CS 매니저님 상기 현상 확인 부탁드립니다. AGV 정위치가 문제일것 같습니다. 혹시 언제 발생했는지 시간 알려주실수 있을까요? May 19, 2025 at 2:58 PM, Mohammad Amir : @Viczai Tamás @FACS_오창훈_CHANGHOON Please check E0STKA35_P01 there is IPS sensor reading error and it is blocking Rolls delivery to Press Anode -1 and 3. Thank you very much! May 19, 2025 at 2:59 PM, 조혜근 : 방금 발생했는데 현지 FA가 임시조치 하였습니다. 건드리지 말라고 부탁했는데 이미 조치 했네요... May 19, 2025 at 2:59 PM, FACS_오창훈_CHANGHOON : Now IPS sensor err We are checking plz wait a minute May 19, 2025 at 2:59 PM, Mohammad Amir : Thank you very much 🙏 May 19, 2025 at 2:59 PM, 조혜근 : 어제 야간에도 같은 현상 발생 했었습니다 May 19, 2025 at 3:03 PM, FACS_오창훈_CHANGHOON : It's solved and we are monitoring~ May 19, 2025 at 3:03 PM, Mohammad Amir : Thank you very much! May 19, 2025 at 3:04 PM, Mohammad Amir : @FA @Viczai Tamás Please check E0STKC33_C01 there is Travel Lag Error and it is blocking transfer to Press Cathode -3. Thank you very much! May 19, 2025 at 3:05 PM, (Unknown) : Katód slitt 3 leszedő kar nem kezdi meg a feladatot.megnéznétek?köszi May 19, 2025 at 3:06 PM, KIM SEYEON [김세연]_FA : 네 확인해보겠습니다. May 19, 2025 at 3:07 PM, JAEYOON KIM / CS : 해당 현상이 발생 하였을 당시의 AGV와 해당 AGV가 도착 했을때의 위치를 보고, 상황을 판단하는게 우선일 듯 합니다. 현재로써는 리셋하여 해당현상 파악이 힘들 듯 하네요. 상기 상황 재발 시 현장 보존 후 다시 요청주셔야 할 것 같습니다. May 19, 2025 at 3:10 PM, adambenczik : Kész May 19, 2025 at 3:13 PM, 조혜근 : 해당 현상이 일어났을때는 UW 이재기가 버퍼에 내려 놓았을때여서 AGV는 이미 나가고없는데 확인이 가능한건가요? May 19, 2025 at 3:14 PM, 조혜근 : 야간에도 해당 문제 일어났을때 대응가능하신가요? 아니면 주간에만 가능하신가요? May 19, 2025 at 3:15 PM, JAEYOON KIM / CS : This message was deleted. May 19, 2025 at 3:16 PM, JAEYOON KIM / CS : 야간에는 00:00 ~ 08:00 간 대응 가능 인원 상주 예정입니다. 현장 PM님들에게 요청 하시면 CS 대응하겠습니다. May 19, 2025 at 3:22 PM, 조혜근 : 네 알겠습니다. 해당 시간에 문제 재발생 시 현장 보존하고 대응 요청 드리겠습니다. May 19, 2025 at 3:22 PM, JAEYOON KIM / CS : 넵 감사합니다. May 19, 2025 at 3:45 PM, adambenczik : Meg is vagyunk, köszönjük May 19, 2025 at 3:47 PM, Kurgya Attila : Bocs hogy odapakoltunk May 19, 2025 at 3:49 PM, adambenczik : Így jobb nektek is, mert felszabadult a hely, és mi is gond nélkül hozzáférünk May 19, 2025 at 5:55 PM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.19 "B" műszak, 11+1/12+1 Tech, 1Sl Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Sup May 19, 2025 at 6:13 PM, KIM SEYEON [김세연]_FA : Photo May 19, 2025 at 6:13 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please help him about this error May 19, 2025 at 6:14 PM, Szarka Adrián : Sziasztok anod Slitt 1-2 nem állhat meg nincs bent a raktárban alap anyag Assy számára. Így kerlek ma este minél előbb oldjuk meg a gondot ha lesz. Köszönöm May 19, 2025 at 6:18 PM, Szücs Géza FT-B : i will check May 19, 2025 at 6:20 PM, Atif/Ivancsa FA : Solved Thank you May 19, 2025 at 6:26 PM, Viktoriia Hleba : Sziasztok. nincs AGV - 20 perc 1 slitter cathode May 19, 2025 at 6:27 PM, Rácz Dániel / FA : @Szücs Géza FT-B Elektróda AN Coatingon nem fognak AGV-t használni egyenlőre. Kiállítjuk őket az SL asztal mellé és kikapcsoljuk. May 19, 2025 at 6:27 PM, Rácz Dániel / FA : Megyünk May 19, 2025 at 6:28 PM, Rácz Dániel / FA : @mcs pleasr check May 19, 2025 at 6:29 PM, Rácz Dániel / FA : Sokved May 19, 2025 at 6:30 PM, VK (mcs) : Last LR received at 13:28 but There is no available material. May 19, 2025 at 6:30 PM, Rácz Dániel / FA : ThankYou May 19, 2025 at 6:37 PM, VK (mcs) : RBC0929 assigned and it's on the way. May 19, 2025 at 6:53 PM, Csicskovics Balázs : Sziasztok Anode press 3-4-re elindultak az AGV-k? May 19, 2025 at 6:53 PM, Böröcz Tamás : Szia Igen May 19, 2025 at 6:54 PM, Csicskovics Balázs : Köszönöm May 19, 2025 at 7:08 PM, Szarka Adrián : Anod Slitt 2 nincs agv May 19, 2025 at 7:08 PM, Szarka Adrián : Jön már ? May 19, 2025 at 7:15 PM, Csicskovics Balázs : Anode press 2 re gyertek R/W AGV probléma May 19, 2025 at 7:22 PM, VK (mcs) : There is no available material. Also there is no LR. Please apply LR and when material is available then it will transfer. May 19, 2025 at 7:26 PM, Szarka Adrián : 9000 cella van még raktárban mes szerint May 19, 2025 at 7:28 PM, Nagy Dávid 4 : Anod slitt 2 robot probléma help help köszönöm szépen May 19, 2025 at 7:29 PM, VK (mcs) : @MES Please check the case. According to RTD there is no material for Slitter 2. Thx May 19, 2025 at 7:49 PM, Viktor Vadas : Sziasztok! Anod 1en a Koreai kollegak szerint hasznalhatjuk az AGV-ket Ha elindul Anod 2 is akkor majd ott is fogjuk May 19, 2025 at 7:49 PM, Viktor Vadas : Segitseget kernek az uzembe helyezeshez itt Coatingon May 19, 2025 at 7:49 PM, Rácz Dániel / FA : Megyek May 19, 2025 at 7:49 PM, Viktor Vadas : Koszonom! May 19, 2025 at 7:56 PM, Rácz Dániel / FA : @Szücs Géza FT-B Az elektródán simán lelettek kapcsolva az anód oldali coatingon az AGV-k. Az összes elveszítette a pozícióját. Itt van a DonJu meg a Fánk ők rakják most vissza mindet a térképre. May 19, 2025 at 7:57 PM, Szücs Géza FT-B : Szia, oké. Még az adminban vagyok May 19, 2025 at 7:59 PM, Rácz Dániel / FA : @Noémi (소미) ide tudnál jönni an roll raktárhoz ? May 19, 2025 at 7:59 PM, Noémi (소미) : Szia, megyek May 19, 2025 at 7:59 PM, Rácz Dániel / FA : Elektróda anód roll raktár May 19, 2025 at 7:59 PM, Rácz Dániel / FA : Köszönöm May 19, 2025 at 8:06 PM, Rácz Dániel / FA : Elmentek már nem kell jönnöd May 19, 2025 at 8:07 PM, Noémi (소미) : Rendben 😞 May 19, 2025 at 8:12 PM, 최기수(GI SU CHOI) : This message was deleted. May 19, 2025 at 8:34 PM, Szarka Adrián : Anod press 4 problem robot u/w May 19, 2025 at 8:35 PM, Szarka Adrián : Szokásos szervo error May 19, 2025 at 8:35 PM, Szarka Adrián : Gyertek legyszi köszi May 19, 2025 at 8:35 PM, Pálosi Róbert : Megyek May 19, 2025 at 8:37 PM, Pálosi Róbert : Kész May 19, 2025 at 8:40 PM, Szarka Adrián : Köszönöm May 19, 2025 at 8:46 PM, Szarka Adrián : Anod Slitt 3 egyik reel el vitte a robot másikat nem. May 19, 2025 at 8:46 PM, Szarka Adrián : Gyertek legyszi köszi May 19, 2025 at 8:49 PM, Pálosi Róbert : Megyek May 19, 2025 at 8:52 PM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success(950) coater line 1 rw 2-success(800) May 19, 2025 at 8:56 PM, 장정훈 : @FA Anod 5 Stocker M02 port is down, please check! Thank you! May 19, 2025 at 9:10 PM, Pálosi Róbert : This message was deleted. May 19, 2025 at 9:17 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success(635) coater line 1 rw 2-success(700) May 19, 2025 at 9:34 PM, 장정훈 : @FA Anod 2 Stocker AGV retry Errror Please check !! Thank you!! May 19, 2025 at 9:48 PM, 최기수(GI SU CHOI) : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success(800) coater line 1 rw 2-success(850) May 19, 2025 at 9:49 PM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC51 (8052)(8053) Run time over. May 19, 2025 at 9:52 PM, VK (mcs) : @FA Please check Anode roll STKA34 -M01 There is a transfer command to manual port but SCS indicates carrier id exist error. May 19, 2025 at 10:16 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success(733) coater line 1 rw 2-success(745) May 19, 2025 at 11:13 PM, Atif/Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success(625) coater line 1 rw 2-success(610) May 19, 2025 at 11:44 PM, Atif/Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success (790) coater line 1 rw 2-success ( 845) May 20, 2025 at 12:44 AM May 20, 2025 at 12:44 AM, Atif/Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1-success (1050) coater line 1 rw 2-success (792) May 20, 2025 at 1:10 AM, Nagy Dávid 4 : Anod slitt 3 nincs tálca help help köszönöm szépen May 20, 2025 at 1:13 AM, Szarka Adrián : Anod Slitt 2 sincs reel talca May 20, 2025 at 1:23 AM, VK (mcs) : There was an issue in STK A52. It has been solved and trays are on the way. May 20, 2025 at 1:26 AM, Rácz Dániel / FA : Nem sokára érkeznek. Raktár hiba volt, de már elhárították. May 20, 2025 at 1:27 AM, Pálosi Róbert : Jön csak lassan. May 20, 2025 at 1:29 AM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Hello VK Can you check coater AN AGV 9?? This agv have RBA0545 But now state is UNK May 20, 2025 at 1:30 AM, VK (mcs) : Checking May 20, 2025 at 1:30 AM, 방혁 PM(Bang.Hyuk) FA : Roll ID EA1P073F51D16 May 20, 2025 at 1:39 AM, VK (mcs) : RBA0545 UR received from E1CTA010-P02 to STKA33 During transition to the AGV 9 alarm happened: cargo status abnormal & Manufacturing normal stocking detection time is over. So MCS didn't receive transfer command from ACS and right now according to MCS, carrier is still on the port E1CTA010_P02 May 20, 2025 at 1:50 AM, Nagy Dávid 4 : Anód slitt 3-nál nincs tálca help help köszönöm szépen May 20, 2025 at 1:53 AM, Rácz Dániel / FA : @VK (mcs) please check, thank you. May 20, 2025 at 1:54 AM, VK (mcs) : Already informed to @FA team in other group. STKA52 is inactive stop May 20, 2025 at 2:00 AM, Szücs Géza FT-B : its working May 20, 2025 at 2:03 AM, Szücs Géza FT-B : evriting is good, but slitt not have empti reel tray. please send them. Thank You May 20, 2025 at 2:04 AM, VK (mcs) : Priority for electrode side is on 60. It will transfer after a few minutes. Thx May 20, 2025 at 2:11 AM, Szarka Adrián : Anod slitt1 ninsc tálca May 20, 2025 at 2:11 AM, Szücs Géza FT-B : @VK May 20, 2025 at 2:12 AM, Szarka Adrián : Nagyon lassan jön a tálca. Nekünk termelni kell mert Assy meg fog állni !! May 20, 2025 at 2:12 AM, Szücs Géza FT-B : @mcs May 20, 2025 at 2:13 AM, Szücs Géza FT-B : nekünk megmondták, nekünk nem szabad. May 20, 2025 at 2:13 AM, VK (mcs) : STKA52 is just work for electrode side. It will take a time Please be patient May 20, 2025 at 2:15 AM, Szarka Adrián : Én türelmes vagyok. De Assy nem lesz az. Mert állandóan meg állnak mert nem működik a raktár May 20, 2025 at 2:16 AM, Szücs Géza FT-B : ez mér @MCS dolga. azt mondták mi nem hozhatunk létre feladatot, nem törölhetünk, prioritást nem állíthatunk. szal nem tehetem meg amit eddig megtettem, hogy legyen termelés, még akkor sem, ha logikus és bevállt...... May 20, 2025 at 2:17 AM, Szücs Géza FT-B : ez nem az MCS ellen szól! May 20, 2025 at 2:21 AM, Szarka Adrián : Ez így van. De abba nem gondol bele senki ha innen nem megy anyag akkor a következő folyamat fog meg állni….. May 20, 2025 at 2:21 AM, 장정훈 : @방혁 PM(Bang.Hyuk) FA @KIM SEYEON [김세연]_FA @김건희 안녕하세요! 전극공정 장정훈 입니다. 음극 릴 창고 2번 Rack to Rack 반송이 많아서 전극 공트레이 반입이 지연 되고 있는거 같은데 사유를 알 수 있을까요?? May 20, 2025 at 2:28 AM, KIM SEYEON [김세연]_FA : 분석을 좀 해보겠습니다 May 20, 2025 at 2:28 AM, Szücs Géza FT-B : én belegondoltam... May 20, 2025 at 2:28 AM, Szücs Géza FT-B : Photo May 20, 2025 at 2:30 AM, 장정훈 : 스토커 적재율이 20%이상 차이가 나고 있습니다 May 20, 2025 at 2:32 AM, Szücs Géza FT-B : Photo May 20, 2025 at 2:33 AM, Szarka Adrián : Anod Press 2 uw robot szervo probléma. Ami napok óta tart. Kerlek gyertek. Köszi May 20, 2025 at 2:33 AM, Szarka Adrián : Anod slitt 2 ninsc tálca May 20, 2025 at 2:34 AM, Rácz Dániel / FA : Boeing May 20, 2025 at 2:35 AM, Szarka Adrián : Áll a gep mert nem tudjuk el küldeni a kész tekercset May 20, 2025 at 2:36 AM, Szücs Géza FT-B : @MCS pPLS send empty tray May 20, 2025 at 2:37 AM, VK (mcs) : I am sending from STK A51 as well May 20, 2025 at 2:37 AM, Szarka Adrián : Anod Slitt 1 nincs üres reel talca May 20, 2025 at 2:39 AM, Szücs Géza FT-B : volt régen egy ötletem, ami megvalósult, és ment pár hónapig. majd jött valaki ls eltörölte May 20, 2025 at 2:40 AM, Szarka Adrián : Tudjuk miért ….. May 20, 2025 at 2:43 AM, Szarka Adrián : Anod Slitt 2 nincs reel talca nem tudjuk elküldeni a tekercset May 20, 2025 at 2:44 AM, Szücs Géza FT-B : szokjátok meg légyszives, hogy a nincs reeltálca üziket, @MCS-el kell kezdeni. Köszönöm szépen May 20, 2025 at 2:46 AM, Szarka Adrián : Jó nem baj May 20, 2025 at 2:46 AM, Szarka Adrián : Ha kell 1 percenként fogom be írni May 20, 2025 at 2:47 AM, Szarka Adrián : Bocsi ti meg ezt szokjátok meg hogy akkor egész nap csipogni fog a telefon ha nem jön May 20, 2025 at 2:47 AM, Rácz Dániel / FA : Kész May 20, 2025 at 2:48 AM, Csanálosi Gábor FA : Csipogjon csak, csipogni fog az illetékeseknél is. ;) May 20, 2025 at 2:49 AM, Szarka Adrián : Így legalább lehet lesz hatása May 20, 2025 at 2:49 AM, 방혁 PM(Bang.Hyuk) FA : 1F 노칭에서 풀트레이 반출잡과 동작이 겹치면서 잡이 많이 몰려있는 상태입니다. 우선순위 조정하여 공트레이 공급먼저되게 조정중입니다. 곧 원할하게 공급될것 같습니다. May 20, 2025 at 2:52 AM, 장정훈 : 감사합니다!! May 20, 2025 at 2:53 AM, Szücs Géza FT-B : ha nem némítja May 20, 2025 at 2:54 AM, Szarka Adrián : Bizonyíték itt lesz a kakaoba nekem már ez elég. Utána tudom mutatni hogy miért állt a Slitt gép 3 órát. May 20, 2025 at 2:54 AM, Szarka Adrián : Minden reel talca hiány le van fotózva úgy hogy ennyi May 20, 2025 at 3:06 AM, 방혁 PM(Bang.Hyuk) FA : 현재는 정상공급 되고있습니다. 예비 물량까지 미리 빼두겠습니다 May 20, 2025 at 3:07 AM, VK (mcs) : Now it seems condition backed to normal. May 20, 2025 at 3:31 AM, Viktor Vadas : Sziasztok! Anod 5os jumbo raktarba kellene segitseg az ujrainditashoz! Koszonom! May 20, 2025 at 3:36 AM, 고형렬 : This message was deleted. May 20, 2025 at 3:42 AM, Nagy Dávid 4 : Help help köszönöm szépen May 20, 2025 at 3:43 AM, Szarka Adrián : Anod Slitt 1 robot meg állt Rw oldalon May 20, 2025 at 3:43 AM, Szarka Adrián : Gyertek legyszi köszi May 20, 2025 at 3:48 AM, Pálosi Róbert : Megyek May 20, 2025 at 3:53 AM, Pálosi Róbert : Kész May 20, 2025 at 4:18 AM, Nagy Dávid 4 : Sziasztok! Anod 5os jumbo raktarba kellene segitseg az ujrainditashoz! Koszonom! Help help köszönöm szépen May 20, 2025 at 4:20 AM, Szücs Géza FT-B : adat hiba, kezelői hibára utal, nincs beolvasva a lot ID May 20, 2025 at 4:21 AM, Szücs Géza FT-B : vagy egyeb rollal kapcsolatos adat hiányzik May 20, 2025 at 4:21 AM, Szarka Adrián : Dávid szerintem a daru újra indításra gondolt. ( rossz ajtó nyitás ) May 20, 2025 at 4:22 AM, Szarka Adrián : Amikor mentem coatingra a daru nem volt áram alatt May 20, 2025 at 4:23 AM, Pálosi Róbert : Mátáram alatt van May 20, 2025 at 4:23 AM, Szücs Géza FT-B : ilyet nem ír most May 20, 2025 at 4:24 AM, Szarka Adrián : Köszönjük szépen (thumbsup)(thumbsup)(thumbsup) May 20, 2025 at 4:31 AM, Rácz Dániel / FA : Máltán ? May 20, 2025 at 4:32 AM, Pálosi Róbert : 😂😂😂 May 20, 2025 at 4:32 AM, Pálosi Róbert : A transfer out módban van May 20, 2025 at 4:33 AM, Pálosi Róbert : Pedig bé kellene vennie a rollt May 20, 2025 at 4:33 AM, Szarka Adrián : Anod konvejor error May 20, 2025 at 4:33 AM, Szarka Adrián : Help help May 20, 2025 at 4:33 AM, Szarka Adrián : Szerintem a lift állt meg May 20, 2025 at 4:33 AM, Csanálosi Gábor FA : Neked meg a gyógyszert. :D May 20, 2025 at 4:33 AM, Rácz Dániel / FA : Jöbök May 20, 2025 at 4:39 AM, Rácz Dániel / FA : Kész May 20, 2025 at 6:12 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 1 rw 1-success (966) coater line 1 rw 2-success ( 968) May 20, 2025 at 6:16 AM, Oleksii Krasnoshchok : Hello please come anode press 2 problem in r/w May 20, 2025 at 6:28 AM, Saki /Iváncsa Fa : Correction: Line 2 May 20, 2025 at 6:57 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1-success (850) May 20, 2025 at 6:57 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.20 Time:06:00~18:00 1. Baek Hojong 2. Lee Jubing Köszönöm szépen May 20, 2025 at 7:03 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (1148) coater line 2 rw 2- ( 1091) May 20, 2025 at 7:23 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (1122) coater line 2 rw 2- ( 1323) May 20, 2025 at 7:24 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 오퍼레이터가 UR을 1000미터 넘어서 누르는 이유가 궁금합니다 May 20, 2025 at 7:25 AM, Baek Hojong(백호종)FA : 현장입니다 확인하겠습니다 May 20, 2025 at 7:27 AM, waseem/ Iváncsa Fa : This message was deleted. May 20, 2025 at 7:32 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1-success ( 1000) coater line 1 rw 2- ( pull out manually) May 20, 2025 at 7:48 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (627) coater line 2 rw 2- (859 ) May 20, 2025 at 7:53 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1-success ( 725) coater line 1 rw 2- ( pull out manually) May 20, 2025 at 8:18 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (665) coater line 2 rw 2- (667 ) May 20, 2025 at 8:20 AM, 이게리 : @Deepu Divan FA-Eng @Koncz Tamás could you please come to Anode Coating at 10:00? We have an issue and We would like to request modification for efficient production. Thank you May 20, 2025 at 8:22 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 700) coater line 1 rw 2-success ( 720) May 20, 2025 at 8:43 AM, Koncz Tamás : Yes, we meet there May 20, 2025 at 8:50 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (645) coater line 2 rw 2- (714) May 20, 2025 at 8:53 AM, Szeitz Flórián : Anód slitt 3 ra nem érkezik a reel tálca légyszives nézétek meg. Köszönöm May 20, 2025 at 8:53 AM, Skwarek Tibor : Nézzük May 20, 2025 at 8:53 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 1000) coater line 1 rw 2-success ( 800) May 20, 2025 at 8:57 AM, Skwarek Tibor : Sok feladata van a raktárbak, de mennek a tálcák May 20, 2025 at 9:03 AM, 조혜근 : 음극 슬리터 3호기 공트레이가 지연되고있습니다. 빠르게 보내주실수 있나요? 재고량이 너무 낮아서 조립에서 설비가 멈출수도있습니다. 확인 부탁드립니다. May 20, 2025 at 9:09 AM, Mohammad Amir : @FA @Skwarek Tibor Also,Please check E0STKA52_C02 it is inactive without error . It is causing delays in empty trays delivery. Thank you very much! May 20, 2025 at 9:10 AM, Skwarek Tibor : Checking May 20, 2025 at 9:11 AM, Nazirov Eldar : Sziasztok szeretnék kérni segítséget Anód oldalon AGV probléma van Airshower előtt May 20, 2025 at 9:11 AM, Nazirov Eldar : Powder May 20, 2025 at 9:16 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (380) coater line 2 rw 2- (545) May 20, 2025 at 9:20 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 850) coater line 1 rw 2-success ( 700) May 20, 2025 at 9:26 AM, 김건희 : @KIM SEYEON [김세연]_FA 음극 슬리터 3호기 트레이 대기 중이라고 하는데, 저희쪽에서 트레이 출고 순위를 올려도 될까요 아니면 대기 하도록 하겠습니다. May 20, 2025 at 9:26 AM, Skwarek Tibor : Moving now May 20, 2025 at 9:26 AM, Mohammad Amir : Thank you very much! May 20, 2025 at 9:26 AM, Skwarek Tibor : Youre welcome May 20, 2025 at 9:35 AM, KIM SEYEON [김세연]_FA : @김건희 피엠님 @삼구조장님 슬리터 공트레이 공급 문제 있습니다. 조치하고 있는데, 절대 SCS로 반송잡이나 PRIORTY 만지지 말아주십시오. 빨리 해결하겠습니다. May 20, 2025 at 9:36 AM, 조혜근 : @김대호 (Kim Dae Ho) May 20, 2025 at 9:37 AM, Mohammad Amir : @Skwarek Tibor Please check E0STKA12_C01 there is MCP Control Power CP trip error. Thank you very much! May 20, 2025 at 9:47 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 530) coater line 1 rw 2-success ( 360) May 20, 2025 at 9:48 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (pull out manually) coater line 2 rw 2- success (pull out manually) May 20, 2025 at 9:53 AM, Sárvári Márk : FA kollégát kérnénk a fólia raktárhoz, koszonom ✌️ May 20, 2025 at 9:53 AM, Viczai Tamás : Megyünk May 20, 2025 at 9:57 AM, Skwarek Tibor : Kész May 20, 2025 at 10:00 AM, 이게리 : Problem solved ^^ May 20, 2025 at 10:01 AM, KIM SEYEON [김세연]_FA : @김건희 @김대호 (Kim Dae Ho) 조장님 음극 슬리터 공트레이 투입되고 있을겁니다. 생산 시작하셔도 됩니다. May 20, 2025 at 10:01 AM, 이게리 : @Annau András beszélj kérlek Koncz Tomival 🥺 May 20, 2025 at 10:01 AM, 김건희 : 넵 감사합니다 @조혜근 May 20, 2025 at 10:17 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 674) coater line 1 rw 2-success ( 347) May 20, 2025 at 10:18 AM, Oleksii Krasnoshchok : Hello in anode press 1 so long wait Agv for u/w May 20, 2025 at 10:18 AM, Mohammad Amir : Checking May 20, 2025 at 10:20 AM, Szeitz Flórián : Sziasztok! Anód roll raktár -ba elég nagy a káosz. 3as Stokerbe már 3 roll is várakozik 2 a tàtolon 1 az AGV -n. 1 stokerben is probléma. May 20, 2025 at 10:21 AM, adambenczik : Minden rendben van, csak blokkolják egymást kicsit May 20, 2025 at 10:22 AM, Mohammad Amir : @FA Please provide me confirmation,which carrier actually exists on E0STKA32_P01? Is it RBA0500? Press-1 Anode job is getting delayed. Thank you very much! May 20, 2025 at 10:22 AM, Mohammad Amir : @adambenczik Please check this issue and inform me the location of RBA0500. Thank you very much! May 20, 2025 at 10:24 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (510) coater line 2 rw 2- success (823) May 20, 2025 at 10:26 AM, adambenczik : Yes May 20, 2025 at 10:27 AM, Mohammad Amir : Issue has been resolved ✅. Now roll on the way to Anode Press -1. I am monitoring. Thank you very much! May 20, 2025 at 10:30 AM, Viczai Tamás : Most viszi. May 20, 2025 at 10:31 AM, Mohammad Amir : @Oleksii Krasnoshchok for your information:- AGV#22 on the way now. Thank you very much! May 20, 2025 at 10:36 AM, Nazirov Eldar : sziasztok szeretnék kérni segítsék a Anód raktár előtt AGV Áll köszönöm May 20, 2025 at 10:36 AM, Oleksii Krasnoshchok : thanks, agv arrived May 20, 2025 at 10:36 AM, 조혜근 : 넵 감사합니다 May 20, 2025 at 10:36 AM, Mohammad Amir : You are welcome, Feel free to contact me again if you need any further assistance. May 20, 2025 at 10:56 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success ( pull out manually) May 20, 2025 at 10:58 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1-success (600) coater line 2 rw 2- success ( manually) May 20, 2025 at 11:27 AM, waseem/ Iváncsa Fa : Electrode result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success (pull out manually ) May 20, 2025 at 11:28 AM, Mohammad Amir : @adambenczik @FA Please check E0CNVA51_P01 there is INV-01 RunTime Over Error and it is blocking materials recovery. Thank you very much! May 20, 2025 at 11:29 AM, Skwarek Tibor : Checking May 20, 2025 at 11:53 AM, waseem/ Iváncsa Fa : Electrode result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success (pull out manually ) May 20, 2025 at 12:34 PM, waseem/ Iváncsa Fa : Electrode result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success (pull out manually ) May 20, 2025 at 12:40 PM, KIM SEYEON [김세연]_FA : why pull out manually? May 20, 2025 at 12:43 PM, 김태현 : 저희 샘플 때문에 시간이 딜레이되서 수동으로 뺐습니다. 다음롤부터 Aav사용하겠습니다. May 20, 2025 at 12:45 PM, KIM SEYEON [김세연]_FA : 넵 알겠습니다. May 20, 2025 at 12:45 PM, KIM SEYEON [김세연]_FA : 저희쪽 문제인지 싶어서 여쭤본겁니다. May 20, 2025 at 12:51 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 800) coater line 1 rw 2-success ( 600) May 20, 2025 at 1:19 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 650) coater line 1 rw 2-success ( 480) May 20, 2025 at 2:08 PM, 박태영 : 김건희PM님 현재 릴창고 내 공트레이의 수량이 사용대비 너무 많아서 창고에 비효율이 많이 발생합니다. FA에서 적정수량에 대한 산정을 계산중으로 수량 산정된다면 그 수령만큼 릴 공트레이를 빼내고 창고 효율화 진행하실것을 권장드립니다 May 20, 2025 at 2:10 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STKC35_C01 there is Light curtain error. Thank you very much! May 20, 2025 at 2:13 PM, Viczai Tamás : Koreans work there. May 20, 2025 at 2:18 PM, Mohammad Amir : Thank you very much for the information! May 20, 2025 at 2:31 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( 620) coater line 1 rw 2-success ( 580) May 20, 2025 at 2:56 PM, FACS_오창훈_CHANGHOON : There are no Korean workers and the crane MC is OFF. Unfortunately, we do not have the authority to take action on the crane. Please check~ May 20, 2025 at 2:59 PM, Viczai Tamás : Megyünk May 20, 2025 at 3:02 PM, Skwarek Tibor : Done May 20, 2025 at 3:38 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success ( 800) May 20, 2025 at 4:05 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success ( pull out manually) coater line 1 rw 2-success ( pull out manually) May 20, 2025 at 4:26 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success ( 627) coater line 2 rw 2-success ( manual) May 20, 2025 at 4:34 PM, Vászon Márton : Katód Pressz 2re nem. Érkezik tekercs közel egy órája. Minden zöld nem látszik ok valaki légyszives nézzen utána kö2 May 20, 2025 at 4:34 PM, Vászon Márton : Köszi May 20, 2025 at 4:35 PM, gutenkunstabelzoltan : Nezzuk May 20, 2025 at 4:36 PM, adambenczik : @Mohammad Amir is there no material for E1PRC020? Please check May 20, 2025 at 4:36 PM, Mohammad Amir : Checking May 20, 2025 at 4:40 PM, Mohammad Amir : There are currently 99 materials available for this process. There is already a job for this machine. However job can not proceed cause there is a cargo RBC0010 exists at E0STKC35_P01(4020). Please check this port and remove the cargo from the way. Thank you very much! May 20, 2025 at 4:41 PM, adambenczik : Okey, thank you May 20, 2025 at 4:42 PM, Mohammad Amir : You are welcome! May 20, 2025 at 4:46 PM, gutenkunstabelzoltan : Meg van a hiba probalkozunk vele May 20, 2025 at 4:59 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success ( 500) coater line 2 rw 2-success ( 500) May 20, 2025 at 5:37 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 1989m coater line 2 rw 1- success ( 215) coater line 2 rw 2-success ( manual) May 20, 2025 at 6:01 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.20. "B" műszak, 12+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(0): Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(5): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromis May 20, 2025 at 6:19 PM, Szappanos Gábor : Hali. Ide tudtok jönni coating anód 2 U/W- hez. Túl alacsonyan van az átadó, és balasetveszélyes. Köszi May 20, 2025 at 6:24 PM, Czeilinger Krisztián : Megyünk May 20, 2025 at 6:45 PM, Czeilinger Krisztián : Kesz. May 20, 2025 at 7:01 PM, Szarka Adrián : Coating 20 agv ki állt hibára anod 2 köszi May 20, 2025 at 7:02 PM, Czeilinger Krisztián : Megyünk. May 20, 2025 at 7:02 PM, Szarka Adrián : Mindig ott áll ki hibára. Azon az egy ponton May 20, 2025 at 7:03 PM, Szarka Adrián : Most itt vannak az uj Fa kollégák de csak ki nyomta a hibát. A hiba forrást kéne megtalálni. Gyertek és meg mutatom hol a baj. Ezt el kéne küldeni valami mesternek aki meg nézi mi a lehet a baj. Vagy állít a szenzoron vagy valamin. Mert az nem megoldás hogy vigyünk mindent ki a területről kb 🤣🤣🤣🤣🤣 May 20, 2025 at 7:07 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (523) coater line 2 rw 2-success (610) May 20, 2025 at 7:15 PM, Szarka Adrián : Anód slitt 3-nál a tálca szállító szallag sípol, piros. May 20, 2025 at 7:23 PM, Czeilinger Krisztián : Kész. May 20, 2025 at 7:25 PM, Nagy Dávid 4 : Anod press 3 R/W agv pozíció probléma help help köszönöm szépen May 20, 2025 at 7:35 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (808) coater line 1 rw 2-success (760) May 20, 2025 at 7:40 PM, Nagy Dávid 4 : AGV nem hozza az anyagot, anód slitt3-ra 15 perce help help köszönöm szépen May 20, 2025 at 7:41 PM, Nagy Dávid 4 : Katod reel raktárhoz kérnék szépen segítséget a 10 ponthoz Laci kolega ott vár help help köszönöm szépen May 20, 2025 at 7:42 PM, Csanálosi Gábor FA : Már úton May 20, 2025 at 7:43 PM, Szabadi Miki : Mindjárt nézzük May 20, 2025 at 7:48 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (640) coater line 2 rw 2-success (630) May 20, 2025 at 8:14 PM, Szappanos Gábor : Sziasztok. Fóliaraktárból nem tudunk fóliát kivenni. Legyetek szívessek megnézni. Köszi May 20, 2025 at 8:15 PM, Szücs Géza FT-B : @Szabadi Miki @Kiss Balázs F.A. légyszi segítsetek ottan. Kösszi May 20, 2025 at 8:16 PM, Szabadi Miki : Egy pillanat és megyünk May 20, 2025 at 8:22 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (1417) coater line 2 rw 2-success (1625) May 20, 2025 at 8:25 PM, Kiss Balázs F.A. : Elvileg most jó May 20, 2025 at 8:32 PM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1010) coater line 1 rw 2-success (890) May 20, 2025 at 8:51 PM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (1205) coater line 2 rw 2-success (1375) May 20, 2025 at 9:06 PM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (860) coater line 1 rw 2-success (850) May 20, 2025 at 9:21 PM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (1110) coater line 2 rw 2-success (1090) May 20, 2025 at 9:36 PM, 김대호 (Kim Dae Ho) : Trey ID LTA0049 It is mapped to EA1P073F51D0411A. In reality, mapping to EA1P073F51D0413A It should be. Is it possible to change the Mcs image? @Mcs May 20, 2025 at 9:37 PM, VK (mcs) : Checking May 20, 2025 at 9:39 PM, VK (mcs) : Sorry but LOT ID can not be changed in MCS. May 20, 2025 at 9:40 PM, 김대호 (Kim Dae Ho) : Can't you release the tray Id mapping? EA1P073F51D0411A has already been shipped May 20, 2025 at 9:41 PM, Szarka Adrián : Anod konvejor megállt. Kerlek nézzetek meg köszi May 20, 2025 at 9:41 PM, Czeilinger Krisztián : Úton. May 20, 2025 at 9:45 PM, VK (mcs) : LTA0049 with LOT ID EA1P073F51D0411A Already released to conveyor A52-M03 But I can not find any carrier with LOT ID EA1P073….413A in the system. May 20, 2025 at 9:47 PM, VK (mcs) : @FA Please check Anode reel conveyor A51 (6046) Port interface error. May 20, 2025 at 9:48 PM, Nagy Dávid 4 : Catod slit 3 nincs AGV 20 perc help help köszönöm szépen May 20, 2025 at 9:49 PM, 김대호 (Kim Dae Ho) : Was the tray Id of EA1P073F51D0411A LTA0894? May 20, 2025 at 9:51 PM, 김대호 (Kim Dae Ho) : The carrier ID of EA1P073F51D0413A is LTA0049. It's. (I checked the records of the equipment) But LTA0049 enters EA1P073F51D0411A It is confirmed that there is. What is the state of LTA0049 in MCS? May 20, 2025 at 9:53 PM, Czeilinger Krisztián : Kész van. May 20, 2025 at 9:55 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (737) coater line 2 rw 2-success (758) May 20, 2025 at 9:55 PM, VK (mcs) : No it is LTA0049 LOT ID for LTA0894 was not submitted and rack in report reply was MCS and MES carrier status is different. May 20, 2025 at 9:56 PM, VK (mcs) : LTA0049 right now is empty-empty May 20, 2025 at 9:59 PM, VK (mcs) : It was full in E0CNVA52-M03 But transferred to the STK as an Empty-Empty. Operations already took it. May 20, 2025 at 10:04 PM, 김대호 (Kim Dae Ho) : I see. Let me check more. Thank you for answering 👍 @VK (mcs) May 20, 2025 at 10:05 PM, Szücs Géza FT-B : cnv c/a 51 - Electrode, OH2 group chat cnv c/a 52 - Assy, GF group chat May 20, 2025 at 10:10 PM, VK (mcs) : As I see LTA0894 transferred to M09 and LOT.…….411A has been registered. Thx May 20, 2025 at 10:14 PM, VK (mcs) : Issue was, when carrier transferred from Slitter 10/ port 3. LOT ID wasn't assigned. Thx May 20, 2025 at 10:14 PM, 김대호 (Kim Dae Ho) : Yes So we were checking the phenomenon, I restocked the tray because it was taken out of the port. May 20, 2025 at 10:15 PM, VK (mcs) : Thank you May 20, 2025 at 10:22 PM, Rácz Dániel / FA : LTA1760 May 20, 2025 at 10:25 PM, Szarka Adrián : Cathode slitt3 nincs AGV 60' May 20, 2025 at 10:26 PM, Szarka Adrián : Nézzetek meg kerlek. Köszi May 20, 2025 at 10:26 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (602) coater line 2 rw 2-success (706) May 20, 2025 at 10:28 PM, Nagy Dávid 4 : Anod slitt 2-3 nincsen tálca help help köszönöm szépen May 20, 2025 at 10:29 PM, VK (mcs) : Please apply LR May 20, 2025 at 10:30 PM, KIM SEYEON [김세연]_FA : Photo May 20, 2025 at 10:31 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please check why anode slitter 2-3 don't have empty tray. May 20, 2025 at 10:31 PM, KIM SEYEON [김세연]_FA : any oos in the Crane? May 20, 2025 at 10:31 PM, VK (mcs) : There is an issue in conveyor. Technicians are working on it. May 20, 2025 at 10:32 PM, VK (mcs) : The conveyor has an issue and @FA team are working on it. May 20, 2025 at 10:33 PM, Szarka Adrián : 76 perce be van kapcsolva az LR May 20, 2025 at 10:34 PM, VK (mcs) : Do you still working on conveyor A51? May 20, 2025 at 10:35 PM, VK (mcs) : Job cancelled by OP action. That's why carrier does not transferred. Now need a LR again. May 20, 2025 at 10:36 PM, Szarka Adrián : Now? May 20, 2025 at 10:37 PM, Rácz Dániel / FA : Anód #1 es liftel van a baj, csináljuk May 20, 2025 at 10:37 PM, VK (mcs) : Please apply LR again. Then carrier will assigned. May 20, 2025 at 10:37 PM, 김대호 (Kim Dae Ho) : If there is no roll in the buffer, doesn't it signal? May 20, 2025 at 10:38 PM, Szarka Adrián : I applied it. That's why I'm asking, is it good now? May 20, 2025 at 10:38 PM, VK (mcs) : There are 31 rolls available for 3rd Slitter May 20, 2025 at 10:39 PM, Atif/Ivancsa FA : Error occurred during AGV PiO interface E0STA34-TR-MCP Try to solve but need help May 20, 2025 at 10:39 PM, Atif/Ivancsa FA : Cathod storage area May 20, 2025 at 10:40 PM, VK (mcs) : No, we didn't receive LR. May 20, 2025 at 10:41 PM, Szarka Adrián : Now ? May 20, 2025 at 10:41 PM, VK (mcs) : Yes.carrier assigned from STK C33 May 20, 2025 at 10:41 PM, Szarka Adrián : We restarted the robot. Is that good? May 20, 2025 at 10:42 PM, Szarka Adrián : great. thank you May 20, 2025 at 10:46 PM, 김대호 (Kim Dae Ho) : 양극 슬리팅 3호기 버퍼에 롤 없으나, L/R 신호가 없다고 하여, 이재기 판넬 메뉴얼 모드 전환 후 재차 오토모드 전환시 신호가 갔다고 합니다. 양극 프레스 3호기도 같은 현상이 있었는데, 점검 부탁드립니다. May 20, 2025 at 10:47 PM, Szarka Adrián : Anod Press 1 re nem jön az agv May 20, 2025 at 10:50 PM, Szarka Adrián : ? May 20, 2025 at 10:51 PM, Szappanos Gábor : Hali. Anód jumbo roll 4 es raktárnál hiba van. Legyetek szívessek megnézik. May 20, 2025 at 10:51 PM, Szappanos Gábor : Köszi May 20, 2025 at 10:52 PM, Szarka Adrián : Anod roll raktárban a 4 daru nem csinál semmit. Fel emelte a roll és ennyi már 5 perce valaki tud jönni ? May 20, 2025 at 10:52 PM, Szabadi Miki : Megyünk May 20, 2025 at 11:30 PM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 Is there no L/R signal? May 20, 2025 at 11:31 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (810) coater line 2 rw 2-success (756) May 20, 2025 at 11:34 PM, Viktoriia Hleba : 2 slitter cathode u/w robot problema May 20, 2025 at 11:34 PM, Szabadi Miki : Megyünk May 20, 2025 at 11:45 PM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 Is there no L/R signal? May 20, 2025 at 11:47 PM, VK (mcs) : There is no available material. LR received for 1st Slitter. May 20, 2025 at 11:49 PM, 김대호 (Kim Dae Ho) : I turned the panel off and brought the roll from AGV. Why does the L/R signal keep disappearing? May 20, 2025 at 11:52 PM, VK (mcs) : For 1st Slitter we received LR several times. And reply for all was no available material. Last one was 23:32:11 For 2nd Slitter LR received at 22:49:50 and carriers assigned at 22:58:18 Last LR is 23:48:57 which reply is no available material. May 20, 2025 at 11:55 PM, 김대호 (Kim Dae Ho) : sliter 2 Turn off the panel, and the roll is here. Whether it's a problem with the system or the same phenomenon as Unit 3 a while ago. I’d like to know. May 20, 2025 at 11:57 PM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 21, 2025 at 12:03 AM May 21, 2025 at 12:03 AM, VK (mcs) : For second Slitter and first one there is no problem. Just material is not available. Right now 1 carrier is going to Slitter 1 May 21, 2025 at 12:04 AM, 김대호 (Kim Dae Ho) : Hm.. i see Thank you for your answer. May 21, 2025 at 12:04 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (1058) coater line 2 rw 2-success (662) May 21, 2025 at 12:30 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (671) coater line 2 rw 2-success (756) May 21, 2025 at 12:56 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 21, 2025 at 1:10 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (645) coater line 2 rw 2-success (691) May 21, 2025 at 1:40 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (894) coater line 1 rw 2-success (927) May 21, 2025 at 1:45 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (686) coater line 2 rw 2-success (567) May 21, 2025 at 1:52 AM, Viktoriia Hleba : 2 slitter cathode u/w robot problema May 21, 2025 at 2:06 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (819) coater line 1 rw 2-success (731) May 21, 2025 at 2:13 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (578) coater line 2 rw 2-success (625) May 21, 2025 at 2:25 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 2호기 이재기에서 설비 척킹시 Y-AXIS position Detect Sensor Error 발생중입니다. Fa에서는 임시조치중인데, 조치 가능한 인원 있으신가요? @방혁 PM(Bang.Hyuk) FA May 21, 2025 at 2:39 AM, Atif/Ivancsa FA : Result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (780) coater line 1 rw 2-success (638) May 21, 2025 at 2:42 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (670) coater line 2 rw 2-success (768) May 21, 2025 at 3:03 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (840) coater line 1 rw 2-success (710) May 21, 2025 at 3:11 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (647) coater line 2 rw 2-success (768) May 21, 2025 at 3:33 AM, 조성준/samkoo/공정-FA : Hali. Anód jumbo roll 4 es raktárnál hiba van. Legyetek szívessek megnézik. May 21, 2025 at 3:34 AM, Nagy Dávid 4 : Katod reel raktárhoz kérnék szépen segítséget 10 porthoz help help köszönöm szépen May 21, 2025 at 3:34 AM, Nagy Dávid 4 : Photo May 21, 2025 at 3:36 AM, Czeilinger Krisztián : Megyünk. May 21, 2025 at 3:38 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (630) coater line 1 rw 2-success (696) May 21, 2025 at 3:39 AM, Rácz Dániel / FA : Jövünk May 21, 2025 at 3:48 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (640) coater line 2 rw 2-success (672) May 21, 2025 at 3:56 AM, Szappanos Gábor : Hali. 3 as agv nem tud beállni az anód 4 es roll raktárba, állandóan letílt. Légyszíves nézzétek meg. Köszi May 21, 2025 at 4:16 AM, VK (mcs) : @FA Please check Anode reel conveyor A51 Units (6053)&(6054) Run time over. May 21, 2025 at 4:21 AM, Szabadi Miki : Checking May 21, 2025 at 4:23 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (665) coater line 2 rw 2-success (530) May 21, 2025 at 4:31 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (858) coater line 1 rw 2-success (692) May 21, 2025 at 4:53 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (925) coater line 2 rw 2-success (562) May 21, 2025 at 5:01 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (944) coater line 1 rw 2-success (635) May 21, 2025 at 5:26 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 2 rw 1- success (640) coater line 2 rw 2-success (642) May 21, 2025 at 5:27 AM, MUGDHO/Ivansca FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (708) coater line 1 rw 2-success (580) May 21, 2025 at 5:35 AM, Szarka Adrián : Anod roll 1 raktár meg állt hibával May 21, 2025 at 5:36 AM, Szarka Adrián : Gyertek kerlek köszi May 21, 2025 at 5:37 AM, Szabadi Miki : Megyünk May 21, 2025 at 6:14 AM, Mohammad Amir : @FA @Farkas Tamàs Please check E0STKA12_C01 there is Ready off during Forking error. Thank you very much! May 21, 2025 at 6:23 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (950) coater line 1 rw 2-success (700) May 21, 2025 at 6:28 AM, Mohammad Amir : @FA @Farkas Tamàs Please check one job is Alternated cause E1SLA040_P01 is OOS. Thank you very much! May 21, 2025 at 6:32 AM, Viczai Tamás : out of service May 21, 2025 at 6:34 AM, Mohammad Amir : Yes it is OOS that's why one job is Alternated. Is there any production on this line? Thank you very much! May 21, 2025 at 6:35 AM, Viczai Tamás : there is none May 21, 2025 at 6:36 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (675) coater line 2 rw 2-success (535) May 21, 2025 at 6:36 AM, Mohammad Amir : Thank you very much for the information. May 21, 2025 at 6:36 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.21 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assy GF Ca NC OH Eunhyang GF Ca NC Kim Jongwon May 21, 2025 at 6:49 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (630) coater line 1 rw 2-success (550) May 21, 2025 at 6:58 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (manual unload) coater line 2 rw 2-success (manual unload) May 21, 2025 at 7:22 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1000) coater line 1 rw 2-success (550) May 21, 2025 at 7:29 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (manual unload) coater line 2 rw 2-success (manual unload) May 21, 2025 at 7:54 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1325) coater line 1 rw 2-success (550) May 21, 2025 at 8:01 AM, usman/vancsa FA : This message was deleted. May 21, 2025 at 8:06 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (527) coater line 2 rw 2-success (590) May 21, 2025 at 8:14 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (450) coater line 1 rw 2-success (450) May 21, 2025 at 8:40 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (699) coater line 2 rw 2-success (527) May 21, 2025 at 8:45 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (600) coater line 1 rw 2-success (250) May 21, 2025 at 9:03 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (600) coater line 2 rw 2-success (602) May 21, 2025 at 9:17 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (850) coater line 1 rw 2-success (400) May 21, 2025 at 9:35 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (430) coater line 2 rw 2-success (615) May 21, 2025 at 9:43 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (550) coater line 1 rw 2-success (400) May 21, 2025 at 10:06 AM, na1tis : Hello! Press 2,problem R/W AGV,help me,please May 21, 2025 at 10:06 AM, na1tis : Thank you) May 21, 2025 at 10:06 AM, na1tis : Cathode May 21, 2025 at 10:07 AM, Viczai Tamás : Mindjárt megyünk! May 21, 2025 at 10:07 AM, Simon Attila F. A. : Jövök, Tomi. May 21, 2025 at 10:09 AM, Simon Attila F. A. : Kész. May 21, 2025 at 10:13 AM, 조혜근 : @FA 안녕하세요. 혹시 천장 필터 교체하시는 분들 여기 있으실까요? 크레인이 AGV 화물 감지 센서에 감지 되어서 AGV가 못움직이고있습니다. 확인 부탁드립니다. 음극 프레스 2호기 UW측 입니다 May 21, 2025 at 10:14 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (410) coater line 2 rw 2-success (517) May 21, 2025 at 10:17 AM, 조혜근 : 크레인의 위치를 이동 부탁드립니다 May 21, 2025 at 10:23 AM, usman/vancsa FA : result) pv-Anode Length of electrode is m coater line 1 rw 1- success (manual unload) coater line 1 rw 2-success (950) May 21, 2025 at 10:38 AM, Oláh Rajmund : Gyertek légyszives anode press 2 U/W AGV probléma May 21, 2025 at 10:39 AM, Viczai Tamás : Itt vagyok May 21, 2025 at 10:46 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (pull out manually) coater line 1 rw 2-success (600) May 21, 2025 at 10:47 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (425) coater line 2 rw 2-success (528) May 21, 2025 at 11:12 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (850) coater line 1 rw 2-success (440) May 21, 2025 at 11:18 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (495) coater line 2 rw 2-success (603) May 21, 2025 at 11:26 AM, Baek Hojong(백호종)FA : @김건희 피엠님 유선상으로 말씀드린 프레스 슬리터 UW 이재기 X Y축 도그센서 적용 테스트를 진행할려고합니다 명일 주간부터 진행 예정이라 EQ장비 담당으로 도움주시면 감사하겠습니다 아래 비가동호기 테스트 예정입니다 프레스 양극 5 6 7 8 음극 5 6 7 8 슬리터 양극 4 5 음극 4 5 May 21, 2025 at 11:41 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (850) coater line 1 rw 2-success (380) May 21, 2025 at 11:51 AM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (457) coater line 2 rw 2-success (465) May 21, 2025 at 11:52 AM, Mohammad Amir : @Skwarek Tibor Please check E0STKC002_C01 there is Travel Driver error. Thank you very much! May 21, 2025 at 11:55 AM, Viczai Tamás : Done May 21, 2025 at 11:55 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 12:06 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (400) coater line 1 rw 2-success (350) May 21, 2025 at 12:19 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (800) coater line 2 rw 2-success (600) May 21, 2025 at 12:40 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (850) coater line 1 rw 2-success (400) May 21, 2025 at 12:50 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (730) coater line 2 rw 2-success (500) May 21, 2025 at 1:05 PM, na1tis : Problem R/W,Cathode Press 2,help me,please May 21, 2025 at 1:05 PM, na1tis : Thank you) May 21, 2025 at 1:09 PM, Skwarek Tibor : Kész May 21, 2025 at 1:13 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1355) coater line 1 rw 2-success (450) May 21, 2025 at 1:29 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (695) coater line 2 rw 2-success (698) May 21, 2025 at 1:42 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (430) May 21, 2025 at 1:57 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (405) coater line 2 rw 2-success (460) May 21, 2025 at 2:05 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (925) coater line 1 rw 2-success (308) May 21, 2025 at 2:28 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (830) coater line 2 rw 2-success (505) May 21, 2025 at 2:30 PM, 김건희 : 호기가 많아서 삼구 출장자분 한분만 근무하시는 날에는 어렵습니다 다음주 월요일부터 김대호 조장님 조간 출근이시니 차주 월 혹은 화로 일정 확인 요청드립니다 @김대호 (Kim Dae Ho) May 21, 2025 at 2:31 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (660) coater line 1 rw 2-success (400) May 21, 2025 at 2:57 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (290) coater line 1 rw 2-success (350) May 21, 2025 at 3:06 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2947m coater line 2 rw 1- success (856) coater line 2 rw 2-success (545) May 21, 2025 at 3:31 PM, 조혜근 : RBA0728 Please check why this doesn't come as a slitter May 21, 2025 at 3:31 PM, Mohammad Amir : Checking May 21, 2025 at 3:32 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (pull out manually) coater line 1 rw 2-success (pull out manually) May 21, 2025 at 3:33 PM, Mohammad Amir : Sir, Currently this carrier RBA0728 has a job to go to E1SLA040_P01. And Slitter -4_P01 is OOS that's why it is not moving. Thank you very much! May 21, 2025 at 3:34 PM, 조혜근 : Can you cancel it and change it so that it can come to Slitter 1 and 2? May 21, 2025 at 3:39 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (604) coater line 2 rw 2-success (766) May 21, 2025 at 3:43 PM, 조혜근 : @FA Rolls are not coming to the UW of anode press unit 2. Please check it May 21, 2025 at 3:44 PM, Mohammad Amir : We are working on this issue. Thank you very much! May 21, 2025 at 3:44 PM, Mohammad Amir : Checking May 21, 2025 at 3:47 PM, Mohammad Amir : I have resolved the issue.✅ AGV#15 on the way. Thank you very much! May 21, 2025 at 3:48 PM, 조혜근 : May I know when the signal went in? May 21, 2025 at 3:48 PM, 조혜근 : I'm using buffer mode, but I wonder why the roll wasn't coming May 21, 2025 at 3:48 PM, Mohammad Amir : We received the LR received at 15:21 successfully ✅. Job created at 15:21 as well. Thank you very much! May 21, 2025 at 4:01 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (940) coater line 1 rw 2-success (450) May 21, 2025 at 4:03 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (380) coater line 2 rw 2-success (652) May 21, 2025 at 4:31 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1000) coater line 1 rw 2-success (390) May 21, 2025 at 4:42 PM, Mohammad Amir : We have resolved the issue ✅. Now RBA0728 on the way to Slitter Anode -2. Thank you very much! May 21, 2025 at 4:45 PM, 조혜근 : Thank you May 21, 2025 at 4:46 PM, Mohammad Amir : You are welcome! May 21, 2025 at 4:57 PM, waseem/ Iváncsa Fa : result) pv-cathode Length of electrode is 2991m coater line 1 rw 1- success (530) coater line 1 rw 2-success (600) May 21, 2025 at 5:08 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (540) coater line 2 rw 2-success (555) May 21, 2025 at 5:19 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (380) coater line 1 rw 2-success (358) May 21, 2025 at 5:41 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (590) coater line 2 rw 2-success (720) May 21, 2025 at 5:49 PM, usman/vancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (415) coater line 1 rw 2-success (400) May 21, 2025 at 5:58 PM, Farkas Dániel Elekt : Sziasztok May 21, 2025 at 5:59 PM, Farkas Dániel Elekt : Anod 1 coating megallt a robot May 21, 2025 at 6:05 PM, Yena Valerii : hello, pls come to anode press 4 May 21, 2025 at 6:12 PM, Semenszki Péter : Sziasztok! A fólia raktárhoz kitudnátok jönni? May 21, 2025 at 6:15 PM, Jun(정우준)_SKOH FA : Night shift 05.21 18:00-06:00 Jeong woojun Elec Cho Sung Jun May 21, 2025 at 6:17 PM, Oláh András : Megyünk May 21, 2025 at 6:24 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (2): Magyar Balázs, Novák Károly Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 21, 2025 at 6:24 PM, Shakir (MCS) : @FA Please check E0STK002_C01 there is Travel exact position error after movement . Thank you very much! May 21, 2025 at 6:26 PM, Oláh András : Checking May 21, 2025 at 7:05 PM, Hári Zoltàn : Sziasztok! gyertek legyszi a katod 1 coaterre! Az elobb nem vitte el az agv a rollokat. Manualban leszedtuk. May 21, 2025 at 7:19 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(770) coater line 1 rw 2-success(605) May 21, 2025 at 7:22 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (560) coater line 1 rw 2-success (680) May 21, 2025 at 7:23 PM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (1169) coater line 2 rw 2-success (1174) May 21, 2025 at 7:23 PM, 김대호 (Kim Dae Ho) : Anode Roll Warehouse 1 Please check the alarm May 21, 2025 at 7:25 PM, Shakir (MCS) : @FA Please check E0STKA31_M01 there is Data off sensor, Sensor on overtime. Thank you May 21, 2025 at 7:26 PM, Oláh András : Checking May 21, 2025 at 7:59 PM, 주명기 : 코터 양극 1라인 이제기 작동하지 않습니다 확인 부탁합니다 May 21, 2025 at 8:04 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(952) coater line 1 rw 2-success(1107) May 21, 2025 at 8:04 PM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (727) coater line 2 rw 2-success (750) May 21, 2025 at 8:05 PM, 서지원 : @FA Please check cathode coating 1st line transfer machine asap May 21, 2025 at 8:08 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (666) coater line 1 rw 2-success (676) May 21, 2025 at 8:30 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(757) coater line 1 rw 2-success(852) May 21, 2025 at 8:32 PM, Turianytsia Olesia : A tálca a szállítószalagon ragadt Cathode Slitt 2 May 21, 2025 at 8:37 PM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (1268) coater line 2 rw 2-success (1245) May 21, 2025 at 8:38 PM, Koska Szilárd János : sziasztok anód rollraktárba kiállt hibára az AGV megtudnátok nézni May 21, 2025 at 8:43 PM, Hári Zoltàn : Gyertek légyszi a katód1 coaterre. Allitolag a 2es rwre hiaba hivjuk az agv-t nem jon. Megneznetek a kovetkezot legyszi? May 21, 2025 at 8:43 PM, Somoskövy Martin : Sziasztok. Cathode Press 1 mellett dugó van. Megnéznétek? Köszönöm. May 21, 2025 at 8:52 PM, Hári Zoltàn : Ne gyertek, megoldva. Koszi! May 21, 2025 at 8:56 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1115) coater line 1 rw 2-success(802) May 21, 2025 at 9:08 PM, Shakir (MCS) : @Fa Please check E0CNVA51_06_016/17 there is INV-01 RunTime Over Error. Thank you May 21, 2025 at 9:09 PM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (840) coater line 2 rw 2-success (845) May 21, 2025 at 9:15 PM, Shakir (MCS) : @Fa Please check E0CNVA51_P01 INV 01 run time over error Thank you May 21, 2025 at 9:17 PM, Oláh András : Checking May 21, 2025 at 9:22 PM, Shakir (MCS) : @FA Please check E0STKA52 crane is not moving without error. Thank you May 21, 2025 at 9:27 PM, Shakir (MCS) : Several empty trays job are in waiting, check this issue on priority. Thank you May 21, 2025 at 9:28 PM, 카스텔 발라지 F.A. : Solved May 21, 2025 at 9:32 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(912) coater line 1 rw 2-success(765) May 21, 2025 at 9:33 PM, Somoskövy Martin : Cathode Press 1 R/W mögül elküldenétek a 9-es AGV-t? Kézzel vennénk le az anyagot. Köszönöm. May 21, 2025 at 9:33 PM, Oláh András : Megyünk May 21, 2025 at 9:34 PM, Oláh András : Parancsolj már megy is May 21, 2025 at 9:49 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(760) coater line 1 rw 2-success(503) May 21, 2025 at 9:58 PM, Somoskövy Martin : Cathode Slitt 3-ra nem érkezik anyag. Ránéznétek? Köszönöm. May 21, 2025 at 9:58 PM, Oláh András : Természetesen May 21, 2025 at 10:01 PM, Szabadi Miki : @Shakir (MCS) please check this , thank you May 21, 2025 at 10:02 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (660) coater line 1 rw 2-success (675) May 21, 2025 at 10:06 PM, Shakir (MCS) : Please check the E0STKC34_P01_BP01 blocking the carrier. Thank you May 21, 2025 at 10:08 PM, Oláh András : RBC0768 blocking the BP01 port May 21, 2025 at 10:08 PM, Oláh András : No order for 0768 May 21, 2025 at 10:08 PM, Shakir (MCS) : Cargo exits RBA0768 blocking for material to slitt3 May 21, 2025 at 10:08 PM, Shakir (MCS) : Yea May 21, 2025 at 10:09 PM, Oláh András : Than no Agv ordered to bring it out May 21, 2025 at 10:10 PM, Hári Zoltàn : Technikust kernenk a foliaraktarthoz! Nem tudunk foliat kivenni! Köszi! May 21, 2025 at 10:10 PM, Oláh András : Megyünk May 21, 2025 at 10:16 PM, Oláh András : @Shakir (MCS) where should we send RBC0768? May 21, 2025 at 10:17 PM, Shakir (MCS) : The carrier ID has been DELETE, there no carrier with these id in MCS and RTD. May 21, 2025 at 10:18 PM, Oláh András : Than i send to stkc33 May 21, 2025 at 10:18 PM, Shakir (MCS) : Yes May 21, 2025 at 10:19 PM, Shakir (MCS) : It came out from StkC34 at 18:54 May 21, 2025 at 10:20 PM, Turianytsia Olesia : Nincs AGV 45 perc Cathode Slitt 3 May 21, 2025 at 10:20 PM, Shakir (MCS) : Working on it May 21, 2025 at 10:22 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1005) coater line 1 rw 2-success(950) May 21, 2025 at 10:27 PM, Shakir (MCS) : Issue has been resolved now ✅ AGV#07 has been assigned to slitt3 CA Thank you @Oláh András May 21, 2025 at 10:28 PM, Oláh András : @Turianytsia Olesia ~10 perc kb mire odaér. May 21, 2025 at 10:29 PM, Oláh András : @Shakir (MCS) thank you for your help 🙏 May 21, 2025 at 10:29 PM, Shakir (MCS) : You’re welcome May 21, 2025 at 10:30 PM, 김대호 (Kim Dae Ho) : Agv coming? Cathode sliter 3 facility stopped. May 21, 2025 at 10:31 PM, 김대호 (Kim Dae Ho) : Why didn't agv come for more than 1 hour? May 21, 2025 at 10:31 PM, Oláh András : ☝️ May 21, 2025 at 10:32 PM, Shakir (MCS) : AGV07 has been departed May 21, 2025 at 10:33 PM, Oláh András : Somebody deleted 1 order, but the roll was on the port and that blocked without alarm May 21, 2025 at 10:33 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (605) coater line 1 rw 2-success (663) May 21, 2025 at 11:02 PM, Shakir (MCS) : @FA Please check E0STKC34_P01, AGV07 AGV PIO time over. Thank you May 21, 2025 at 11:05 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (534) coater line 1 rw 2-success (manual) May 21, 2025 at 11:13 PM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (770) coater line 2 rw 2-success (645) May 21, 2025 at 11:24 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(728) coater line 1 rw 2-success(768) May 21, 2025 at 11:36 PM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (557) coater line 1 rw 2-success (546) May 21, 2025 at 11:49 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(958) coater line 1 rw 2-success(1218) May 22, 2025 at 12:06 AM May 22, 2025 at 12:06 AM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (663) coater line 1 rw 2-success (632) May 22, 2025 at 12:13 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(868) coater line 1 rw 2-success(752) May 22, 2025 at 12:18 AM, Faisal / Ivancsa FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (835) coater line 2 rw 2-success (723) May 22, 2025 at 12:40 AM, Faisal / Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (554) coater line 1 rw 2-success (540) May 22, 2025 at 12:43 AM, 김대호 (Kim Dae Ho) : Cathode Roll Warehouse 3 Please check the alarm May 22, 2025 at 12:43 AM, Oláh András : Comin May 22, 2025 at 12:46 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(733 coater line 1 rw 2-success(755) May 22, 2025 at 1:09 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (585) coater line 1 rw 2-success (590) May 22, 2025 at 1:14 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1140) coater line 1 rw 2-success(1121) May 22, 2025 at 1:30 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (808) coater line 2 rw 2-success (775) May 22, 2025 at 1:39 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (373) coater line 1 rw 2-success (541) May 22, 2025 at 1:43 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(665) coater line 1 rw 2-success(660) May 22, 2025 at 1:58 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (766) coater line 2 rw 2-success (791) May 22, 2025 at 2:14 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(950) coater line 1 rw 2-success(705) May 22, 2025 at 2:20 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (658) coater line 1 rw 2-success (750) May 22, 2025 at 2:26 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (922) coater line 2 rw 2-success (703) May 22, 2025 at 2:42 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (1151) coater line 2 rw 2-success (709) May 22, 2025 at 2:54 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (580) coater line 1 rw 2-success (616) May 22, 2025 at 3:08 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(523) coater line 1 rw 2-success(704) May 22, 2025 at 3:09 AM, Semenszki Péter : Sziasztok! A fólia raktárt újra tudnátok indítani? May 22, 2025 at 3:19 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (672) coater line 1 rw 2-success (670) May 22, 2025 at 3:30 AM, Semenszki Péter : Köszönöm May 22, 2025 at 3:32 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (817) coater line 2 rw 2-success (746) May 22, 2025 at 3:37 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(711) coater line 1 rw 2-success(618) May 22, 2025 at 3:46 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(711) coater line 1 rw 2-success(618) May 22, 2025 at 3:50 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (551) coater line 1 rw 2-success (783) May 22, 2025 at 3:59 AM, Shakir (MCS) : @Fa Please check E0CNVC51_08_052/53 INV 01 run time over error Thank you May 22, 2025 at 3:59 AM, Oláh András : Going May 22, 2025 at 4:04 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (734) coater line 2 rw 2-success (588) May 22, 2025 at 4:11 AM, Hári Zoltàn : Techmikust kernek a katod 1 coaterre! Az egyes rw-n nem tudjuk benyomni az auto mode run-t! Koszi! May 22, 2025 at 4:12 AM, Oláh András : Jövök May 22, 2025 at 4:18 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(960) coater line 1 rw 2-success(1058) May 22, 2025 at 4:24 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (1110) coater line 1 rw 2-success (1126) May 22, 2025 at 4:37 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(610) coater line 1 rw 2-success(782) May 22, 2025 at 4:45 AM, Hári Zoltàn : Katod 1 coaternel sargan all egy agv es nem megy a rollert a 2es rw-re! Nezzetek ra legyszi! May 22, 2025 at 4:45 AM, Oláh András : Megyünk May 22, 2025 at 4:49 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (590) coater line 1 rw 2-success (535) May 22, 2025 at 5:05 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(780) coater line 1 rw 2-success(898) May 22, 2025 at 5:07 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (842) coater line 2 rw 2-success (620) May 22, 2025 at 5:36 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1009) coater line 1 rw 2-success(792) May 22, 2025 at 5:42 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (849) coater line 2 rw 2-success (721) May 22, 2025 at 5:57 AM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2991m coater line 1 rw 1- success (570) coater line 1 rw 2-success (525) May 22, 2025 at 6:06 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2993m coater line 2 rw 1- success (552) coater line 2 rw 2-success (760) May 22, 2025 at 6:15 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (575) coater line 1 rw 2-success (490) May 22, 2025 at 6:27 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2991m coater line 1 rw 1- success (980) coater line 1 rw 2-success (520) May 22, 2025 at 6:45 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (450) coater line 1 rw 2-success (400) May 22, 2025 at 7:00 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (810) coater line 2 rw 2-success (360) May 22, 2025 at 7:15 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (460) coater line 1 rw 2-success (450) May 22, 2025 at 7:39 AM, 장정훈 : @Fa Anod1 Roll STK Please check “AGV Retry error” May 22, 2025 at 7:39 AM, Simon Attila F. A. : Thanks, im here May 22, 2025 at 7:39 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2992m coater line 1 rw 1- success (460) coater line 1 rw 2-success (308) May 22, 2025 at 7:39 AM, Mohammad Amir : @FA Please check E0STKC33_C01 there is Travel Lag Error. Thank you very much! May 22, 2025 at 7:40 AM, Simon Attila F. A. : I see... May 22, 2025 at 7:44 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (360) coater line 1 rw 2-success (420) May 22, 2025 at 7:47 AM, Czél Tamás : Sziasztok Katód Press 2-őn elakadt egy szekér, pls nézzétek meg. Köszönöm May 22, 2025 at 7:48 AM, Viczai Tamás : Megyünk May 22, 2025 at 7:49 AM, Viczai Tamás : ? May 22, 2025 at 7:57 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2992m coater line 1 rw 1- success (48) coater line 1 rw 2-success (48) Filter changing May 22, 2025 at 8:17 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2871m coater line 2 rw 1- success (910) coater line 2 rw 2-success (956) May 22, 2025 at 8:17 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (550) coater line 1 rw 2-success (500) May 22, 2025 at 8:45 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (430) coater line 1 rw 2-success (450) May 22, 2025 at 8:48 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (780) coater line 2 rw 2-success (690) May 22, 2025 at 9:14 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (470) coater line 1 rw 2-success (500) May 22, 2025 at 9:45 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (500) coater line 1 rw 2-success (480) May 22, 2025 at 10:13 AM, na1tis : Hello! Problem R/W,Cathode Press 1,help me,please May 22, 2025 at 10:13 AM, Viczai Tamás : Megyünk May 22, 2025 at 10:19 AM, Viczai Tamás : Kész May 22, 2025 at 10:21 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (640) coater line 1 rw 2-success (625) May 22, 2025 at 11:24 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (450) coater line 1 rw 2-success (pull out manually) May 22, 2025 at 11:25 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (875) coater line 2 rw 2-success (540) May 22, 2025 at 11:52 AM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (560) coater line 2 rw 2-success (360) May 22, 2025 at 12:15 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (600) coater line 1 rw 2-success (650) May 22, 2025 at 12:18 PM, waseem/ Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (550) coater line 1 rw 2-success (700) May 22, 2025 at 12:45 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (500) coater line 1 rw 2-success (650) May 22, 2025 at 12:49 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2552m coater line 1 rw 1- success (940) coater line 1 rw 2-success (450) May 22, 2025 at 1:14 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (500) coater line 1 rw 2-success (550) May 22, 2025 at 1:17 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (880) coater line 1 rw 2-success (570) May 22, 2025 at 2:03 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0STKC35_C01 there is MCP Control Power trip error. Thank you very much! May 22, 2025 at 2:03 PM, Simon Attila F. A. : Korean people checking the cranes now. May 22, 2025 at 2:12 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2730m coater line 1 rw 1- success (1000) coater line 1 rw 2-success (550) May 22, 2025 at 2:15 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (470) coater line 1 rw 2-success (570) May 22, 2025 at 2:27 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (pull out manually) coater line 2 rw 2-success (pull out manually) May 22, 2025 at 2:40 PM, waseem/ Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (750) coater line 1 rw 2-success (700 May 22, 2025 at 2:46 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (700) coater line 1 rw 2-success (560) May 22, 2025 at 2:56 PM, waseem/ Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (550) coater line 2 rw 2-success (400) May 22, 2025 at 3:07 PM, waseem/ Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (830) coater line 1 rw 2-success (500) May 22, 2025 at 3:15 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (500) coater line 1 rw 2-success (360) May 22, 2025 at 3:28 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2901m coater line 2 rw 1- success (730) coater line 2 rw 2-success (530) May 22, 2025 at 3:43 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 3374m coater line 1 rw 1- Manual offload coater line 1 rw 2- Manual offload May 22, 2025 at 3:44 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (540) coater line 1 rw 2-success (450) May 22, 2025 at 3:55 PM, 장정훈 : @MCS LTA0729, please change the destination! The current value is zero, so the tray is not moving! May 22, 2025 at 3:55 PM, Mohammad Amir : Checking May 22, 2025 at 3:55 PM, 장정훈 : The production should not be delayed, it is urgent. May 22, 2025 at 3:56 PM, Mohammad Amir : Sure Sir. May 22, 2025 at 3:58 PM, Mohammad Amir : Please tell me it's current location. Thank you! May 22, 2025 at 3:59 PM, 장정훈 : 6123 May 22, 2025 at 4:01 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2608m coater line 2 rw 1- success (1050) coater line 2 rw 2-success (500) May 22, 2025 at 4:01 PM, Mohammad Amir : Are you sure Sir? In MCS /RTD it shows current location as E0CNVA51_06_035. Please confirm. Thank you! May 22, 2025 at 4:02 PM, 장정훈 : Please change it to 06_123! May 22, 2025 at 4:03 PM, Mohammad Amir : Location has been updated as requested ✅. Thank you! May 22, 2025 at 4:04 PM, 장정훈 : CCS monitoring didn't change the destination. May 22, 2025 at 4:05 PM, Mohammad Amir : @CCS @FA Please update the location of LTA0729 to 06_123. Thank you very much! May 22, 2025 at 4:05 PM, Mohammad Amir : In MCS and RTD side location has been set to as requested, however in CCS it still shows as old location,I have informed the CCS team to update it's location. Thank you very much! May 22, 2025 at 4:09 PM, Mohammad Amir : @CCS @FA Please take action urgently it as production is getting affected. Thank you very much! May 22, 2025 at 4:11 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- (790) coater line 1 rw 2- (450) May 22, 2025 at 4:15 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (470) coater line 1 rw 2-success (550) May 22, 2025 at 4:16 PM, 장정훈 : The FA Technician forced Trey to move and now Trey is moving! Thank you May 22, 2025 at 4:16 PM, Mohammad Amir : Okay Sir, Thank you very much for you too. May 22, 2025 at 4:23 PM, Saki /Iváncsa Fa : result) pv-Anode Length of electrode is 2683m coater line 2 rw 1- success (101) coater line 2 rw 2-success (92) Line 2 stopped May 22, 2025 at 4:42 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- (980) coater line 1 rw 2- (450) May 22, 2025 at 4:49 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (750) coater line 1 rw 2-success (1000) May 22, 2025 at 5:13 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (964) coater line 1 rw 2-success (423) May 22, 2025 at 5:17 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (760) coater line 1 rw 2-success (650) May 22, 2025 at 5:20 PM, Yanina : Sziasztok, Cathode slitt 3 „A tálcák nem haladnak előre a szalagon.” May 22, 2025 at 5:20 PM, Skwarek Tibor : Itt vagyunk May 22, 2025 at 5:39 PM, Skwarek Tibor : Ca slitt 2, 8147 es helyen, transfer buffert nem lehet a conveyor oldalról visszahúzni, beragad az x tengely stoppere. May 22, 2025 at 5:39 PM, Saki /Iváncsa Fa : (result) pv-Anoda Length of electrode is 2901m coater line 1 rw 1- success (970) coater line 1 rw 2-success (430) May 22, 2025 at 5:44 PM, Saki /Iváncsa Fa invited (Unknown). May 22, 2025 at 5:44 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (500) coater line 1 rw 2-success (450) May 22, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1): Magyar Balázs, Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 22, 2025 at 6:12 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(817) coater line 1 rw 2-success(577) May 22, 2025 at 6:13 PM, Yena Valerii : Hello, pls come to anode slitt 1 May 22, 2025 at 6:14 PM, Oláh András : We will come soon May 22, 2025 at 6:16 PM, Jun(정우준)_SKOH FA : Night shift 05.22 18:00-06:00 Jeong woojun Elec Cho Sung Jun May 22, 2025 at 6:19 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (647) coater line 1 rw 2-success (501) May 22, 2025 at 6:46 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(930) coater line 1 rw 2-success(811) May 22, 2025 at 6:50 PM, 김대호 (Kim Dae Ho) : Cathode sliter2 Please check the alarm May 22, 2025 at 6:51 PM, Oláh András : Comin May 22, 2025 at 6:51 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (526) coater line 1 rw 2-success (587) May 22, 2025 at 6:53 PM, Szabadi Miki : Light curtain error May 22, 2025 at 7:03 PM, 김대호 (Kim Dae Ho) : Yes, I think the new workers made a mistake. I delivered it to you to be careful. May 22, 2025 at 7:04 PM, Yena Valerii : pls, come to anode press 1 May 22, 2025 at 7:12 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(840) coater line 1 rw 2-success(795) May 22, 2025 at 7:31 PM, 김대호 (Kim Dae Ho) : Please check the Anode press 2 U/W There is no error, but the robot stays still. May 22, 2025 at 7:33 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (1058) coater line 1 rw 2-success (1281) May 22, 2025 at 7:33 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please check May 22, 2025 at 7:33 PM, Shakir (MCS) : Checking May 22, 2025 at 7:36 PM, Shakir (MCS) : AGV11 alarm LD/UD step timeout, Transfer paused @FA please check May 22, 2025 at 7:38 PM, Shakir (MCS) : @Oláh András please check this Thank you May 22, 2025 at 7:49 PM, Erik Gerzsenyi : Katod slitt 3 megallt a conveyor May 22, 2025 at 7:49 PM, Erik Gerzsenyi : Raneztek legyszi? May 22, 2025 at 8:02 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (695) coater line 1 rw 2-success (970) May 22, 2025 at 8:12 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(840) coater line 1 rw 2-success(725) May 22, 2025 at 8:15 PM, Yena Valerii : pls come to anode press 6 May 22, 2025 at 8:16 PM, Kiss Balázs F.A. : 👍🏻 May 22, 2025 at 8:25 PM, Somoskövy Martin : This message was deleted. May 22, 2025 at 8:25 PM, Kiss Balázs F.A. : @Shakir (MCS) pls send material back to storage agv18. And material on agv 17 pls send to anode press2 May 22, 2025 at 8:27 PM, Kiss Balázs F.A. : Ty May 22, 2025 at 8:32 PM, Shakir (MCS) : Job has been initiated for AGV18 to its source. For agv17 we are not allow to send material directly to Process machine. i will send it to source stk Press LR press2 again material will come. May 22, 2025 at 8:35 PM, Oláh András : They want use this material on press2 how can we send it directly? May 22, 2025 at 8:36 PM, Shakir (MCS) : I created job for AGV17 to its source. Press LR again material will come. Thank you May 22, 2025 at 8:36 PM, Oláh András : Okay ty May 22, 2025 at 8:38 PM, Oláh András : @Yena Valerii we cant send ur material directly to press2. Now agv bring it back to storage. Pls use LR again May 22, 2025 at 8:43 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1040) coater line 1 rw 2-success(853) May 22, 2025 at 8:55 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (614 coater line 1 rw 2-success (712 May 22, 2025 at 9:07 PM, Somoskövy Martin : Sziasztok. Cathode Slitt 3-ra nem jönnek üres tálcák. Megnéznétek? Köszönöm. May 22, 2025 at 9:08 PM, Dániel Hufnágel : Raktár hibánk van, ez most egy kicsit feltartja, viszont hamarosan indul May 22, 2025 at 9:09 PM, Shakir (MCS) : Currently STKC52 is OOS that’s why you witnessed delay in tray delivery Thank you May 22, 2025 at 9:19 PM, (Unknown) : (result) pv-Anode Length of electrode is coater line 1 rw 1-success(512 coater line 1 rw 2-success(620 May 22, 2025 at 9:26 PM, Somoskövy Martin : Anode Press 1-re összesen 5 db rollt lát szűrés után az RTD viszont ennél jóval több anyag van amit ugyanúgy használnunk kellene. Megnéznétek mit lehet tenni ezügyben? Köszönöm. May 22, 2025 at 9:27 PM, Szabadi Miki : @Shakir (MCS) May 22, 2025 at 9:32 PM, Shakir (MCS) : There is 5 lot available that satisfies the RTD filtering rule for AN Press1, There are 100 more materials but after filtering by RTD rule, 5 carrier only suitable for press AN. Thank you May 22, 2025 at 9:38 PM, Somoskövy Martin : Yeah I know but because of the First Roll filter we cannot produce the rest of the materials. Is it possible to disable that filter? May 22, 2025 at 9:42 PM, Somoskövy Martin : Only for Anode Press 1. May 22, 2025 at 9:45 PM, (Unknown) : (result) pv-Anode Length of electrode is coater line 1 rw 1-success (1480) coater line 1 rw 2-success(1539) May 22, 2025 at 9:50 PM, Oláh András : @Shakir (MCS) can u explain what is the "First Roll" filter? We checked the filter and we see some lenght data between 1 and 13. May 22, 2025 at 9:51 PM, KIM SEYEON [김세연]_FA : could you explain why UR was so late? May 22, 2025 at 9:53 PM, 조성준/samkoo/공정-FA : 롤이 정상적으로 나오지 않아 수동으로 잘라내기 작업하고 진행해서 늦었습니다 May 22, 2025 at 9:53 PM, Szabadi Miki : @Somoskövy Martin van ötlet ki kért ki anodon megint egy rollt agv-re? A 23as AGV-n RBA1376 ott pihen feladat nélkül anod press 5 mögött May 22, 2025 at 9:53 PM, Shakir (MCS) : Due to bobbin shelf filter ‘BANSHELF_BOBBIN_PRESS’ it getting 100 to 5 that why it is not suitable material to press1, there is only 5, Unfortunately I am not authorized to remove the filter. Thank you May 22, 2025 at 9:57 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (669) coater line 1 rw 2-success (578) May 22, 2025 at 9:58 PM, Oláh András : Appreciate ur hard work 🙏 May 22, 2025 at 9:59 PM, Somoskövy Martin : Nézem. May 22, 2025 at 10:27 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (798) coater line 1 rw 2-success (612) May 22, 2025 at 10:39 PM, 조성준/samkoo/공정-FA : result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (835) coater line 2 rw 2-success (723) May 22, 2025 at 10:42 PM, Shakir (MCS) : @FA Please check E0STKA34_M01 there is Data off,sensor on overtime error. Thank you! May 22, 2025 at 11:00 PM, Faisal / Ivancsa FA : This message was deleted. May 22, 2025 at 11:07 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (497) coater line 1 rw 2-success (700) May 22, 2025 at 11:13 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(733) coater line 1 rw 2-success(755) May 22, 2025 at 11:14 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (835) coater line 2 rw 2-success (723) May 22, 2025 at 11:30 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (605) coater line 1 rw 2-success (517) May 22, 2025 at 11:30 PM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(manual coater line 1 rw 2-success (manual May 22, 2025 at 11:43 PM, (Unknown) : result) pv-Anode Length of electrode is coater line 2 rw 1- success ( 799 coater line 2 rw 2-success (703 May 22, 2025 at 11:58 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (642) coater line 1 rw 2-success (548) May 23, 2025 at 12:04 AM May 23, 2025 at 12:04 AM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1320) coater line 1 rw 2-success(621) May 23, 2025 at 12:07 AM, 김대호 (Kim Dae Ho) : Anode press 5 Agv stops with roll Please check it out. May 23, 2025 at 12:10 AM, Shakir (MCS) : Job has been terminated for AGV23 at 21:03. @ACS @FA send back to stk Thank you May 23, 2025 at 12:13 AM, Oláh András : Im on it May 23, 2025 at 12:15 AM, Oláh András : Its going to E0STKC34_P01 May 23, 2025 at 12:16 AM, Shakir (MCS) : **E0STKA34_P01 Thank you May 23, 2025 at 12:17 AM, Oláh András : Oh yes, sorry 😁 thank you 👍 May 23, 2025 at 12:18 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (1077 coater line 2 rw 2-success (1010 May 23, 2025 at 12:21 AM, Hári Zoltàn : Technikus kene az anod 2 coaterre megallt az egyik agv az utban. Koszi! May 23, 2025 at 12:21 AM, Oláh András : Már megyek is May 23, 2025 at 12:23 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (580 coater line 1 rw 2-success (627 May 23, 2025 at 12:24 AM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(manual coater line 1 rw 2-success (manual May 23, 2025 at 12:49 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (830 coater line 2 rw 2-success (802 May 23, 2025 at 12:50 AM, Koska Szilárd János : sziasztok Cathode slitt3 nál rátudnátok nézni a tálcákra lassan jönnek /elakadtak May 23, 2025 at 12:51 AM, Oláh András : Igen May 23, 2025 at 12:52 AM, Koska Szilárd János : köszönöm May 23, 2025 at 12:54 AM, Oláh András : Kész 👍 May 23, 2025 at 12:55 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (570 coater line 1 rw 2-success (652 May 23, 2025 at 1:22 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (850 coater line 2 rw 2-success (880 May 23, 2025 at 1:31 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (630) coater line 1 rw 2-success (754) May 23, 2025 at 1:42 AM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt 1 May 23, 2025 at 1:52 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (811 coater line 2 rw 2-success (756 May 23, 2025 at 1:57 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (625) coater line 1 rw 2-success (485) May 23, 2025 at 2:15 AM, Yena Valerii : pls, come to anode slitt 2 May 23, 2025 at 2:16 AM, Oláh András : Comin May 23, 2025 at 2:24 AM, Janos R. MX SL invited Kozma István. May 23, 2025 at 2:25 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (963) coater line 2 rw 2-success (600) May 23, 2025 at 2:34 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (1278) coater line 1 rw 2-success (1110) May 23, 2025 at 2:57 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (811 coater line 2 rw 2-success (756 May 23, 2025 at 2:58 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (722) coater line 1 rw 2-success (598) May 23, 2025 at 3:18 AM, Shakir (MCS) : @FA Please check E0STKC35_C01 there is MCP Control Power trip error. Thank you very much! May 23, 2025 at 3:29 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (643) coater line 1 rw 2-success (615) May 23, 2025 at 3:30 AM, (Unknown) : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success 720 coater line 2 rw 2-success 596 May 23, 2025 at 3:46 AM, Shakir (MCS) : @FA Please check Ca Roll stk C32 “Hoist exact position error after forking “ Thank you May 23, 2025 at 3:58 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (540) coater line 1 rw 2-success (512) May 23, 2025 at 4:11 AM, Hári Zoltàn : Technikus kernek az anod 2 re all egy agv az ut kozepen! Koszi! May 23, 2025 at 4:11 AM, Kiss Balázs F.A. : 👍🏻 May 23, 2025 at 4:25 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (520 coater line 1 rw 2-success (712 May 23, 2025 at 4:36 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (700) coater line 2 rw 2-success (725) May 23, 2025 at 4:39 AM, Majláth Martin : Sziasztok catod press 1 re szeretnék segítséget kérni. Köszönöm. May 23, 2025 at 5:09 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (715) coater line 2 rw 2-success (811) May 23, 2025 at 5:37 AM, Shakir (MCS) : @Fa Please check E0CNVA51_P04 INV 01 run time over error Thank you May 23, 2025 at 5:46 AM, Koska Szilárd János : sziasztok kitudnátok jönnei press 4 re a bufferre ferdén rakta le az anyagot May 23, 2025 at 6:02 AM, Saki /Iváncsa Fa : Good morning! 06.00 to 18.00 Day shift 23 may @Saki /Iváncsa Fa @Tumee May 23, 2025 at 6:08 AM, Szeitz Flórián : Sziasztok! Anód press 4 Buffer tarolónàl le állt a leszedő robot . Gyertek légyszives köszönöm May 23, 2025 at 6:10 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 3 Overtime ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 23, 2025 at 6:10 AM, Skwarek Tibor : Megyek May 23, 2025 at 6:11 AM, 이주봉PM LEE JUBONG(FA) : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM Samkoo 이민재 최기수 May 23, 2025 at 6:12 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 2 rw 1- success (1098) coater line 2 rw 2-success (430) May 23, 2025 at 6:27 AM, Skwarek Tibor : Leszedő robot bobbin szenzor vezetéke elszakadt May 23, 2025 at 6:30 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (910) coater line 1 rw 2-success (450) May 23, 2025 at 6:39 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2783m coater line 2 rw 1- success (650) coater line 2 rw 2- manual offloaded May 23, 2025 at 6:57 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (590) coater line 1 rw 2-success (480) May 23, 2025 at 7:01 AM, Skwarek Tibor : E1PRA04-TR04 U/W Bobbin érzékelő vezetéke el van szakadva. Press 6 nincs használatban, így abból átszereltük az érzékelőt. May 23, 2025 at 7:11 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2654m coater line 1 rw 1- success (150) coater line 1 rw 2-success (146) May 23, 2025 at 7:14 AM, Szeitz Flórián : Akkor Használható? May 23, 2025 at 7:14 AM, Skwarek Tibor : Igen. Automatába van kapcsolva. May 23, 2025 at 7:22 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2654m coater line 1 rw 1- success (150) coater line 1 rw 2-success (146) May 23, 2025 at 7:28 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (690) coater line 1 rw 2-success (420) May 23, 2025 at 7:57 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (590) coater line 1 rw 2-success (440) May 23, 2025 at 8:01 AM, Oleksii Krasnoshchok : Hello anode press 4 problem with Agv in u/w May 23, 2025 at 8:02 AM, Oleksii Krasnoshchok : Agv#23 does not enter the port in u/w May 23, 2025 at 8:43 AM, 최기수(GI SU CHOI) : @Tumee where is it now? May 23, 2025 at 8:58 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (520) coater line 1 rw 2-success (460) May 23, 2025 at 9:16 AM, Skwarek Tibor : Avg #23 Anode ki lett véve a gyártásból szenzor hiba miatt. Koreai kollégák dolgoznak rajta. May 23, 2025 at 9:17 AM, Sazzad Bhai SKon : @FA Please check E0STKA52_P02_OP01 : homstand fwd cylinder error. 06084 port. Delaying tray delivery to anode slitting machine May 23, 2025 at 9:22 AM, Szeitz Flórián : Anód slitt re nem érkeznek a tálcàk légyszives nézzétek meg az okát. Köszönöm May 23, 2025 at 9:22 AM, Skwarek Tibor : Nézzük May 23, 2025 at 9:24 AM, duzzaman Md (MCS) : @Szeitz Flórián this is the reason. Its fixed already. There's active job. Materials would be arriving soon. May 23, 2025 at 9:25 AM, cehmannzsoltcehmann : Jönni fognak a tálcák, csak lassan, sok a parancsa a darunak May 23, 2025 at 9:30 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (980) coater line 1 rw 2-success (463) May 23, 2025 at 9:42 AM, duzzaman Md (MCS) : @Fa Please check E0CNVC51_08_151/124 INV 01 run time over error Thank you May 23, 2025 at 9:50 AM, Szeitz Flórián invited Vörös Geri. May 23, 2025 at 9:56 AM, Skwarek Tibor : Done May 23, 2025 at 10:00 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (710) coater line 1 rw 2-success (650) May 23, 2025 at 10:10 AM, Szeitz Flórián : @cehmannzsoltcehmann gyere légyszives anód press 1 hez. May 23, 2025 at 10:10 AM, Szeitz Flórián : Köszönöm May 23, 2025 at 10:15 AM, Vörös Geri : Katód snitt 3 -21 és AGV megàlt Megnèznètek?köszi May 23, 2025 at 10:23 AM, Skwarek Tibor : Kész May 23, 2025 at 10:25 AM, Tumee : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (902) coater line 1 rw 2-success (750) May 23, 2025 at 10:33 AM, KIM SEYEON [김세연]_FA : @김건희 피엠님 금일 롤창고 주행 휠 구리스 상태 확인 작업을 하려고 합니다. 화성동 크레인 주행 휠 파손으로 문제가 있었습니다. 금일 롤창고 양극 3,4호기를 13시.14시 순으로 1시간 비가동 하려고 합니다. 해당창고만 다운이니 전체적인 코프슬 물류 문제는 없습니다. May 23, 2025 at 10:34 AM, Kurgya Attila : Szeretném kérni az illetékes Fa-s kollégákat, hogy vagy módosítsák ( bár már mindenkinek van helye a területen csak akik ott termelnek azoknak nincs) a jelöléseket hogy hová pakolhatunk, vagy inkább hová nem, mert ebből ìgy örökös probléma lesz. Meg van a feljelölés de már fél méterrel a jelöléstöl sem pakolhatunk mert azt is látja az agv. May 23, 2025 at 10:35 AM, 김건희 : 각 호기별로 반송 가능 자재가 얼마나 있는지 확인이 가능하실까요? May 23, 2025 at 10:37 AM, KIM SEYEON [김세연]_FA : 네 공유드리겠습니다 May 23, 2025 at 10:50 AM, duzzaman Md (MCS) : @Fa Please check E0CNVC51_08_044/004/190/153 DATA MISSMATCH ERROR Thank you May 23, 2025 at 10:53 AM, 이영혁 paul : @KIM SEYEON [김세연]_FA 31호기 fd 45 hd 59 32- 67. 24 33- 52. 42 34- 51. 34 35- 51. 18 May 23, 2025 at 10:53 AM, 이영혁 paul : 호기 FD HD순서입니다 May 23, 2025 at 10:57 AM, Skwarek Tibor : Done May 23, 2025 at 10:58 AM, 이게리 : @KIM SEYEON [김세연]_FA @Koncz Tamás @Deepu Divan FA-Eng Please modify AGV route marking as soon as possible. Currently we keep 30-50cm safety gap between the marking But Still the AGV stops and downtime happen. This is Still FA downtime due the designated area was determined by FA, and If We keep it shouldn’t downtime occured. As I know 13 operator from Assembly doing the cleaning But instead of cleaning they could handle this problem. Please Follow it up! May 23, 2025 at 10:59 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (630) coater line 1 rw 2-success (576) May 23, 2025 at 11:01 AM, Szarka Adrián : Szia teljesen igazad van. Én is jeleztem ugyan ezt kedd éjjel. Coating anod 2 mindig meg állt az agv bobin miatt mikor a jelolestol kb 20 cm re volt. Azt a választ kaptam tegyük még hátrébb…… ez minden területen gond ahol agv közlekedik 😢😢😢😢 May 23, 2025 at 11:08 AM, 김건희 : 프래스 슬리터 순서인가요? May 23, 2025 at 11:08 AM, 김건희 : 아 포드 현대 순이군요 May 23, 2025 at 11:09 AM, 김건희 : 죄송하지만 슬리팅 대기롤로만 확인 가능할까요? May 23, 2025 at 11:14 AM, Szeitz Flórián : Anód roll raktár 3 As stoker kiállt hibára . gyertek légyszives nézzétek meg. Köszönöm May 23, 2025 at 11:22 AM, 이영혁 paul : 공정 정보는 mes뷰를 참조해야해서 바로 확인은 어렵고 별도 작업이 필요 해서 시간이 걸립니다 May 23, 2025 at 11:23 AM, Mr.Miti (미티) FA : Kész May 23, 2025 at 11:28 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1- success (555) coater line 1 rw 2-success (480) May 23, 2025 at 11:51 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2663m coater line 1 rw 1- success (550) coater line 1 rw 2-success (430) May 23, 2025 at 12:00 PM, Deepu Divan FA-Eng : I will check ,thank for the info May 23, 2025 at 12:03 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (520) coater line 1 rw 2-manual May 23, 2025 at 12:07 PM, Deepu Divan FA-Eng : Unfortunately we didn't get operators from assembly, and can we discuss this issue on site @이게리 May 23, 2025 at 12:15 PM, 이게리 : Yes! 13:30 at Coating ? May 23, 2025 at 12:18 PM, Deepu Divan FA-Eng : Ok May 23, 2025 at 12:28 PM, Tumee : (result) pv-Cathode Length of electrode is 3001.7m coater line 1 rw 1- success (1462) coater line 1 rw 2-success (1367) May 23, 2025 at 12:46 PM, Tumee : (result) pv-Anode Length of electrode is 3166.9m coater line 1 rw 1- success (858) coater line 1 rw 2- success (1312) May 23, 2025 at 1:00 PM, Tumee : (result) pv-Cathode Length of electrode is 3001.8.m coater line 1 rw 1- success (1572) coater line 1 rw 2-success (11640) May 23, 2025 at 1:06 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success (620) coater line 1 rw 2- success (450) May 23, 2025 at 1:17 PM, 이영혁 paul : @KIM SEYEON [김세연]_FA 슬리팅 자재로 mes에 조회되는 자재입니다 31 - 6-6 32 - 10-1 33 - 11-12 34 - 13-11 35 - 6-8 호기. FD. HD 순입니다 May 23, 2025 at 1:29 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8.m coater line 1 rw 1- success (1132) coater line 1 rw 2-success (1138) May 23, 2025 at 1:34 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success (747) coater line 1 rw 2- success (475) May 23, 2025 at 2:10 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success (714) coater line 1 rw 2- success (490) May 23, 2025 at 2:13 PM, KIM SEYEON [김세연]_FA : @김건희 PM님 33번 롤창고만 3시부터4시까지 비가동하겠습니다. 1시간동안 크게 슬리터 자재가 부족하지 않을겁니다. May 23, 2025 at 2:25 PM, Tumee : (result) pv-Cathode Length of electrode is 2821.2m coater line 1 rw 1- success (1074) coater line 1 rw 2-success (1324) May 23, 2025 at 2:36 PM, Sazzad Bhai SKon : For press: first filters is used to know if the carrier is inside STK, shelf is in-service, or load status is full. This is RTD filter May 23, 2025 at 2:38 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2902m coater line 1 rw 1- success (610) coater line 1 rw 2- success (610) May 23, 2025 at 2:51 PM, Tumee : (result) pv-Cathode Length of electrode is 3001.6m coater line 1 rw 1- success (872) coater line 1 rw 2-success (853) May 23, 2025 at 3:12 PM, Tumee : (result) pv-Anode Length of electrode is 3219.7 coater line 1 rw 1- (manual) coater line 1 rw 2- (manual) May 23, 2025 at 3:19 PM, Tumee : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (722) coater line 1 rw 2-success (652) May 23, 2025 at 3:32 PM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (718) coater line 1 rw 2- success (536) May 23, 2025 at 3:49 PM, duzzaman Md (MCS) : @FA Please check EOCNVA51_06_131/132 INV-01 RUN Time Over Error Thank you! May 23, 2025 at 3:52 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (850) coater line 1 rw 2-success (850) May 23, 2025 at 4:01 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (630) coater line 1 rw 2- success (580) May 23, 2025 at 4:01 PM, cehmannzsoltcehmann : Done May 23, 2025 at 4:22 PM, Tumee : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (937) coater line 1 rw 2-success (752) May 23, 2025 at 4:41 PM, Saki /Iváncsa Fa : This message was deleted. May 23, 2025 at 4:42 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1- success (620) coater line 1 rw 2-success (530) May 23, 2025 at 4:43 PM, Tumee : (result) pv-Cathode Length of electrode is 2337.7m coater line 1 rw 1- success (650) coater line 1 rw 2-success (601) May 23, 2025 at 5:02 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (630) coater line 1 rw 2-success (530) May 23, 2025 at 5:20 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (801) coater line 1 rw 2-success (910) May 23, 2025 at 5:30 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (632) coater line 1 rw 2-success (486) May 23, 2025 at 5:49 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (680) coater line 1 rw 2-success (808) May 23, 2025 at 6:02 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (640) coater line 1 rw 2-success (475) May 23, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 11+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(0): Translater: -- --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Hara May 23, 2025 at 6:17 PM, Hakim/Ivancsa FA : Good evening 23 may Night shift @Hakim/Ivancsa FA @Osman/ "Ivancsa FA" May 23, 2025 at 6:17 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 10+1+1/12+1 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(1): Böröczki Balázs Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Harasztia Zoltán -------------- May 23, 2025 at 6:22 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (900) coater line 1 rw 2-success (500) May 23, 2025 at 6:25 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 6:49 PM, Szarka Adrián : Anod konvejor error May 23, 2025 at 6:49 PM, Szarka Adrián : Gyertek legyszi köszi. May 23, 2025 at 6:49 PM, Szarka Adrián : Lift állt meg szerintem May 23, 2025 at 6:50 PM, Czeilinger Krisztián : Megyek. May 23, 2025 at 6:50 PM, Szarka Adrián : @Szücs Géza FT-B Ma anod Slitt 1-2-3 nem állhat meg assynak nincs anyag. Így nagyon nyomnunk kell. May 23, 2025 at 6:51 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (720) coater line 1 rw 2-success (770) May 23, 2025 at 6:52 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 7:00 PM, 김대호 (Kim Dae Ho) : Anode slitet 3 Please check the tray ID loss error. May 23, 2025 at 7:00 PM, Szarka Adrián : @Szücs Géza FT-B tudsz segíteni ? El akadt a konvejor pálya anod Slitt 6 gépnél May 23, 2025 at 7:02 PM, Szücs Géza FT-B : megyek, bocsi, Erik is adott feladatot 👌🤭😉 May 23, 2025 at 7:02 PM, Szarka Adrián : Anod Slitt 3 meg állt a konvejor May 23, 2025 at 7:05 PM, 김대호 (Kim Dae Ho) : Is there anyone?????????? May 23, 2025 at 7:06 PM, 김대호 (Kim Dae Ho) : Where are you? May 23, 2025 at 7:07 PM, Hakim/Ivancsa FA : Cathode and anode coating site May 23, 2025 at 7:23 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 2819.0m coater line 1 rw 1- success (1050) coater line 1 rw 2-success (1190) May 23, 2025 at 7:23 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 7:30 PM, Nagy Dávid 4 : Katod oldalon 12 agv kiált hibára help help köszönöm szépen May 23, 2025 at 7:30 PM, Szarka Adrián : Katod Press 2 gépnél a 12 agv ki állt hibára May 23, 2025 at 7:30 PM, Szarka Adrián : A raklap megfelelő helyen van. Agv elég távol a vonaltól. May 23, 2025 at 7:31 PM, Szarka Adrián : Már kb semmit nem tudunk sehova rakni mert mindenre meg állnak ezek a sárga csodák May 23, 2025 at 7:32 PM, Szarka Adrián : Gyertek legyszives köszi May 23, 2025 at 7:33 PM, Szarka Adrián : Katod slitten valamiért sípol a konvejor ezt is nézzetek meg legyszives köszönöm May 23, 2025 at 7:39 PM, Viktoriia Hleba : 1 slitter cathode convejor stop. May 23, 2025 at 7:41 PM, Szarka Adrián : Haho May 23, 2025 at 7:41 PM, Szarka Adrián : Valaki ?? May 23, 2025 at 7:41 PM, Szarka Adrián : Anod konvejor is meg állt May 23, 2025 at 7:43 PM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC51 (8004) Run time over! May 23, 2025 at 7:43 PM, Szarka Adrián : Áll mind a két oldalon a konvejor pálya May 23, 2025 at 7:43 PM, Szarka Adrián : Anod oldalon a Slitt 1 nel May 23, 2025 at 7:48 PM, Erik Gerzsenyi : Katod press 2 mellett 9-es agv hibara allt May 23, 2025 at 7:53 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.6m coater line 1 rw 1- success (1200) coater line 1 rw 2-success (990) May 23, 2025 at 7:54 PM, 김대호 (Kim Dae Ho) : Anode slitet is stopped as a whole May 23, 2025 at 7:55 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 7:55 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Hello vk Can you make s command for LTA0396 ?? May 23, 2025 at 7:55 PM, 방혁 PM(Bang.Hyuk) FA : In the E0CNVA51 AREA May 23, 2025 at 7:56 PM, Osman/ "Ivancsa FA" : No They are working manually. May 23, 2025 at 7:56 PM, VK (mcs) : Checking May 23, 2025 at 7:56 PM, Szarka Adrián : Katod Press 2 agv megállt mert nem tud el menni a másik mellett May 23, 2025 at 7:57 PM, Szarka Adrián : Mikor fognak végre működni az agv úgy hogy nem 5 percenként állnak meg ? May 23, 2025 at 7:58 PM, Szarka Adrián : Hol vannak ilyenkor a többi FA kollégák ? May 23, 2025 at 7:59 PM, 방혁 PM(Bang.Hyuk) FA : And pls check LTA1489 May 23, 2025 at 7:59 PM, VK (mcs) : Did you remove it? LTA0396 May 23, 2025 at 7:59 PM, 방혁 PM(Bang.Hyuk) FA : Nope May 23, 2025 at 8:00 PM, VK (mcs) : Location is NA in MCS May 23, 2025 at 8:00 PM, 방혁 PM(Bang.Hyuk) FA : I think someone remove from in CCS May 23, 2025 at 8:00 PM, 김지수PM(Gyuri)_FA : It was removed by operator account May 23, 2025 at 8:03 PM, VK (mcs) : LTA1489 had a data mismatch error. May 23, 2025 at 8:04 PM, 김대호 (Kim Dae Ho) : Cathode sliter will also stop soon. conveyor problem 컨베이어 문제로 음극 슬리팅 현재 전체 정지되었고, 양극 슬리팅도 곧 멈출 예정입니다. @김건희 May 23, 2025 at 8:05 PM, 김건희 : @KIM SEYEON [김세연]_FA 음양극 컨베이어가 다 멈춘다고 합니다 조치하는데 몇시간정도 걸릴까요 May 23, 2025 at 8:05 PM, KIM SEYEON [김세연]_FA : 네 확인해보겠습니다 May 23, 2025 at 8:06 PM, 김건희 : 둘다 동시에 조치하시기 힘들다 하면 음극 먼저 조치 부탁드립니다 May 23, 2025 at 8:06 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check slitter Conveyor error May 23, 2025 at 8:07 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B anode priority is higher May 23, 2025 at 8:07 PM, 김건희 : @김대호 (Kim Dae Ho) 지금 음극쪽 재고 얼마씩 있을까요 May 23, 2025 at 8:07 PM, Csanálosi Gábor FA : They on it since 30 mins or so May 23, 2025 at 8:08 PM, KIM SEYEON [김세연]_FA : what is the problem May 23, 2025 at 8:08 PM, KIM SEYEON [김세연]_FA : error name? May 23, 2025 at 8:08 PM, 김대호 (Kim Dae Ho) : 현재 음극 현대 9천셀, 음극 포드 1만9천 2백 셀 재고있습니다. May 23, 2025 at 8:08 PM, 방혁 PM(Bang.Hyuk) FA : 음극 조치됬습니다 May 23, 2025 at 8:09 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) LTA1489 is not moving now Can you check command status? May 23, 2025 at 8:09 PM, 김건희 : @김대호 (Kim Dae Ho) 확인 요청드립니다 May 23, 2025 at 8:09 PM, 방혁 PM(Bang.Hyuk) FA : 해소까지는 시간이 조금소요될것같습니다 May 23, 2025 at 8:09 PM, 김대호 (Kim Dae Ho) : 1~3호기측 아직 움직임 없습니다. May 23, 2025 at 8:11 PM, VK (mcs) : After cancellation by OP action. MCS received :transfer-initiated command from CCS. May 23, 2025 at 8:14 PM, KIM SEYEON [김세연]_FA : @VK (mcs) is anode empty tray supplied to slitter? May 23, 2025 at 8:14 PM, KIM SEYEON [김세연]_FA : what was the error at Cathode conveyor? Anode conveyor? May 23, 2025 at 8:15 PM, VK (mcs) : Empty trays are supplying. But CNV has an issue and technicians are working on it for 40 minutes May 23, 2025 at 8:16 PM, VK (mcs) : It seems problem has been solved and now empty trays are moving. May 23, 2025 at 8:18 PM, KIM SEYEON [김세연]_FA : okay how is the Cathode side? May 23, 2025 at 8:19 PM, VK (mcs) : Cathode side still has run time over error. May 23, 2025 at 8:20 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 양극쪽 컨베이어 확인부탁드립니다. May 23, 2025 at 8:23 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 8:23 PM, Csanálosi Gábor FA : On it May 23, 2025 at 8:24 PM, Csanálosi Gábor FA : Solved May 23, 2025 at 8:26 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (840) coater line 1 rw 2-success (950) May 23, 2025 at 8:26 PM, KIM SEYEON [김세연]_FA : now Cathode side empty reel tray is supplied? May 23, 2025 at 8:26 PM, KIM SEYEON [김세연]_FA : @VK (mcs) May 23, 2025 at 8:27 PM, VK (mcs) : Both anode and cathode have a sufficient empty tray on CNV. May 23, 2025 at 8:27 PM, VK (mcs) : Supplying is in normal situation. May 23, 2025 at 8:27 PM, KIM SEYEON [김세연]_FA : thanks May 23, 2025 at 8:32 PM, Szücs Géza FT-B : E0CNVA51 working again May 23, 2025 at 8:32 PM, Csanálosi Gábor FA : Both side cnv51 is good now May 23, 2025 at 8:36 PM, Csicskovics Balázs : Sziasztok Cathode Roll raktárhoz gyertek légyszíves Köszönöm May 23, 2025 at 8:36 PM, KIM SEYEON [김세연]_FA : good job May 23, 2025 at 8:44 PM, 김대호 (Kim Dae Ho) : 음극 컨베이어 2층 또 멈추었습니다. @방혁 PM(Bang.Hyuk) FA May 23, 2025 at 8:45 PM, Nagy Dávid 4 : Anod reel raktárhoz kérnék szépen segítséget help help köszönöm szépen May 23, 2025 at 8:47 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 음극 컨베이어 확인 부탁드릴게요. May 23, 2025 at 8:50 PM, Osman/ "Ivancsa FA" : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (800) coater line 1 rw 2-success (900) May 23, 2025 at 8:52 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 8:56 PM, VK (mcs) : @FA Please check Cathode roll STK C31 MCP safety relay off. May 23, 2025 at 8:57 PM, KIM SEYEON [김세연]_FA : @VK (mcs) how is the slitter anode conveyor oos? May 23, 2025 at 8:57 PM, 방혁 PM(Bang.Hyuk) FA : 리프트 센서 파손됬습니다 조치중입니다 May 23, 2025 at 8:58 PM, VK (mcs) : Upper side is out of service. May 23, 2025 at 8:58 PM, KIM SEYEON [김세연]_FA : 우선 조치후 알려주십시오. May 23, 2025 at 8:59 PM, Nagy Dávid 4 : Anod slitt 2 nincsen tálca help help köszönöm szépen May 23, 2025 at 9:00 PM, KIM SEYEON [김세연]_FA : we are working on it please wait May 23, 2025 at 9:01 PM, Nagy Dávid 4 : okay, thank you very much May 23, 2025 at 9:02 PM, 방혁 PM(Bang.Hyuk) FA : 음극 조치되었습니다 May 23, 2025 at 9:02 PM, KIM SEYEON [김세연]_FA : 모니터링 부탁합니다. May 23, 2025 at 9:03 PM, VK (mcs) : @FA Please check Cathode reel CNV C51 8052 Run time over. May 23, 2025 at 9:05 PM, Csicskovics Balázs : Tudtok jönni? Nagyon kellene! May 23, 2025 at 9:05 PM, Szarka Adrián : Csinálják anod konvejor. Nem működik a lift May 23, 2025 at 9:15 PM, Szarka Adrián : Most végeztek. May 23, 2025 at 9:17 PM, Csicskovics Balázs : Oké köszönöm May 23, 2025 at 9:20 PM, Hakim/Ivancsa FA : Material loosening (right) Foil in the cathode side E0stk001-stk-scp @FA can you check May 23, 2025 at 9:20 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (716) coater line 1 rw 2-success (890) May 23, 2025 at 9:21 PM, Pálosi Róbert : , May 23, 2025 at 9:22 PM, Hakim/Ivancsa FA : Solved May 23, 2025 at 9:22 PM, Hakim/Ivancsa FA : (result) pv-Anode Length of electrode is 2901.6m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 9:23 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B pls check slit cnv May 23, 2025 at 9:25 PM, KIM SEYEON [김세연]_FA : error again? May 23, 2025 at 9:25 PM, Pálosi Róbert : kész May 23, 2025 at 9:25 PM, Csicskovics Balázs : Köszönöm May 23, 2025 at 9:40 PM, VK (mcs) : @FA Please check it out. Still not solved. Thx May 23, 2025 at 9:43 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check Cathode CNV C51 8052 RUN TIME OVER May 23, 2025 at 9:45 PM, Szücs Géza FT-B : it solved May 23, 2025 at 9:46 PM, KIM SEYEON [김세연]_FA : good May 23, 2025 at 9:49 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 2304.5m coater line 1 rw 1- success (1360) coater line 1 rw 2-success (1470) May 23, 2025 at 9:54 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (500) coater line 1 rw 2-success (600) May 23, 2025 at 10:01 PM, Szücs Géza FT-B : @Rácz Dániel / FA @Pálosi Róbert @Czeilinger Krisztián CA Coaternél van valami AGV hiba, nézzétek meg SOS légyszived May 23, 2025 at 10:02 PM, Rácz Dániel / FA : Boeing May 23, 2025 at 10:05 PM, Szarka Adrián : a 9 es agv cathod press 2 mögött rosszul vette a kanyart kell fa-s kolèga May 23, 2025 at 10:05 PM, Szarka Adrián : Nézzetek ra kerlek köszi May 23, 2025 at 10:05 PM, Osman/ "Ivancsa FA" : @FA please come to coating Anode 3 Agv number 16 Error : position confidence low May 23, 2025 at 10:05 PM, Viktoriia Hleba : 1-2 slitter cathode convejor stop. May 23, 2025 at 10:06 PM, KIM SEYEON [김세연]_FA : @VK (mcs) where is the problem May 23, 2025 at 10:07 PM, VK (mcs) : Checking May 23, 2025 at 10:07 PM, Szücs Géza FT-B : i see i go May 23, 2025 at 10:07 PM, VK (mcs) : @FA Please check Cathode reel conveyor C51 8005 Run time over. May 23, 2025 at 10:08 PM, Rácz Dániel / FA : Van ott két paletta azt kell hátrébb rakni, szerzünk békát. May 23, 2025 at 10:08 PM, Rácz Dániel / FA : Jövünk May 23, 2025 at 10:10 PM, Szarka Adrián : Igen erről volt szó délelőtt is a csoportban hogy jó lenne ha a jelölések újra lennének rakva mert minden területen ez a baj hogy kb már mindenre ki áll az agv hibára. Kb semmi nem lehet a jelölés körül se. Csak lesz valami változás mert @이게리 beszélt ma erről. Valakivel May 23, 2025 at 10:13 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1- success (800) coater line 1 rw 2-success (870) May 23, 2025 at 10:16 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 10:42 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (760) coater line 1 rw 2-success (750) May 23, 2025 at 10:50 PM, Szarka Adrián : Sziasztok. Ha az operator el van küldve a géptől akkor máskor nekünk szóljatok legyszives mert az operatornak ne ti vagytok a fonoke. Ha probléma van akkor szóljatok nekünk. May 23, 2025 at 10:51 PM, Szarka Adrián : A 3 operator vissza fog menni dolgozni Assy területre és akkor segítsetek nekik mert fentebbi utasítás hogy ezt éjjel meg kell csinálni. Laptopot nem tudunk nekik biztosítani VDI nélkül!!!! De ha nem tudjak a munkát éjjel megcsinalni mert el vannak zavarva akkor legyszives írjatok meg ezt e-mailben a főnököknek !!!! May 23, 2025 at 10:54 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (600) coater line 1 rw 2-success (700) May 23, 2025 at 11:01 PM, Csanálosi Gábor FA : Átköltöztünk a ca oldalra, szívesen. A gép amit birtokba vettek a srácok, 4 külön helyen van feltüntetve, hogy FA only, az a bázis, ahonnan monitorozunk. Ha mi vagyunk kitúrva a saját bázisunkról, akkor meg vagy vakon vagyunk és majd csak beírásra reagálunk, vagy keresünk másik kioszkot. Jelzem, az 51-es manual portok között is van működő kioszk. Szóval ha a "miénket" akarjátok kényelmi szempontból használni, akkor szerintem inkább nektek kellene szólni. SZERINTEM. May 23, 2025 at 11:06 PM, Szarka Adrián : Ezt beszéld meg @Fülöp Csaba @이게리 hogy miért kellett a gép, és miért az a gep kellett. Szerintem monitorozni tudsz egy másik géptől, nekünk meg 100 darab reelt kell át nézni. De mivel mindig azon a gépen dolgozunk azt hittem nem fogja a szivedet bántani. De mivel azt se tudtuk hogy ott ültök, meg emelhetted volna a kezedet és szolhattal volna nekünk mielőtt te el zavarod onnan az embereket!!! May 23, 2025 at 11:11 PM, Csanálosi Gábor FA : Hát szerintem teljesen kulturáltan elmondtam nekik az érveimet és indokaimat, nagyon erős túlzás hogy elzavartam őket. Azt is elmagyaráztam hogy igen, nekünk ott a bázisunk (mutogattam is a jelöléseket), szóval teljes tájékoztatást kaptak. De akkor most (bár nekem sem dolgom), jelzem neked is, hogy igen, az a gf assy FA monitoring bázis (legyen mondjuk ez a neve). És ez egy ideje így is van. De elköltöztünk a hétvégére, ki lehet fújni a levegőt. ;) May 23, 2025 at 11:13 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (900) coater line 1 rw 2-success (745) May 23, 2025 at 11:14 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 23, 2025 at 11:21 PM, Rácz Dániel / FA : Minek írogatjátok ezeket ? May 23, 2025 at 11:42 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (700) coater line 1 rw 2-success (825) May 23, 2025 at 11:57 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 24, 2025 at 12:12 AM May 24, 2025 at 12:12 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 2538.3 m coater line 1 rw 1- success (1190) coater line 1 rw 2-success (1000) May 24, 2025 at 12:41 AM, 김대호 (Kim Dae Ho) : Please check the error of the Anode sliter conveyor. May 24, 2025 at 12:42 AM, Osman/ "Ivancsa FA" : (result) pv-cathode Length of electrode is 2538.3 m coater line 1 rw 1- success (600) coater line 1 rw 2-success (800) May 24, 2025 at 12:43 AM, Rácz Dániel / FA : Jövök May 24, 2025 at 12:46 AM, Rácz Dániel / FA : Kész May 24, 2025 at 12:47 AM, 김대호 (Kim Dae Ho) : köszönöm May 24, 2025 at 12:53 AM, Szarka Adrián : @Sazzad Bhai SKon sziasztok TEMP felhasználó szeretnénk jelszó vissza állítást kérni nem tudunk belépni May 24, 2025 at 12:55 AM, VK (mcs) : Password changed to 1234 Please log in and change it. May 24, 2025 at 12:58 AM, Szarka Adrián : Köszönöm (thumbsup) May 24, 2025 at 1:08 AM, Csicskovics Balázs : Cathode press 1-2 re 40 perce nem hoz Rollt az AGV. Nézzétek meg légyszíves. Köszönöm May 24, 2025 at 1:10 AM, Rácz Dániel / FA : @VK (mcs) please csekk, thank you May 24, 2025 at 1:10 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8 m coater line 1 rw 1- success (805) coater line 1 rw 2-success (890) May 24, 2025 at 1:11 AM, Czeilinger Krisztián : Nézzük. May 24, 2025 at 1:17 AM, Szarka Adrián : Újra indítottam katod Press 1 robotot. Most nézd meg legyszives hogy így kapott feladatot ? May 24, 2025 at 1:18 AM, Czeilinger Krisztián : Nézzük. May 24, 2025 at 1:18 AM, VK (mcs) : Please apply LR again. Previous job canceled by OP action. May 24, 2025 at 1:20 AM, Czeilinger Krisztián : A 21-es AGV fogja vinni. May 24, 2025 at 1:20 AM, VK (mcs) : @FA Please check Anode reel conveyor A51 6018 Run time over. May 24, 2025 at 1:21 AM, Czeilinger Krisztián : Most veszi fel a C35-ös raktárból És megy a C press -1re. May 24, 2025 at 1:23 AM, Szarka Adrián : Köszönöm szépen May 24, 2025 at 1:23 AM, Szarka Adrián : Meg nézed kerlek katod 2 is hogy kapott jelet ? May 24, 2025 at 1:23 AM, Szarka Adrián : Ott is csináltam egy újra indítás May 24, 2025 at 1:25 AM, Szarka Adrián : Katod Press 2 May 24, 2025 at 1:26 AM, Czeilinger Krisztián : Pillanat,hibák van. May 24, 2025 at 1:28 AM, Czeilinger Krisztián : A 9-ea AGV fogja vinni a motyót. May 24, 2025 at 1:28 AM, Szarka Adrián : Köszönöm szépen ☺️☺️☺️☺️☺️☺️☺️ May 24, 2025 at 1:38 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8 m coater line 1 rw 1- success (660) coater line 1 rw 2-success (735) May 24, 2025 at 1:38 AM, Czeilinger Krisztián : A 7es viszi . May 24, 2025 at 1:43 AM, Szarka Adrián : Assy reel raktárnál valamiért nem lép be az RTD valaki tud ebben segíteni ? May 24, 2025 at 1:44 AM, Hakim/Ivancsa FA : (result) pv-Anode Length of electrode is 2808.7m and 2692.5 coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 24, 2025 at 1:44 AM, Szarka Adrián : Jelszó biztos jó mert az Sl laptopon működik. May 24, 2025 at 1:46 AM, Szarka Adrián : @Szücs Géza FT-B May 24, 2025 at 1:56 AM, Szücs Géza FT-B : jó kérdés, IT sec. tuti tudná a választ.. vagy a billentyűzet nyelve van máshogy beállítva, ez a legvalószínűbb. vagy numlock be van nyomva, esetleg a caps lock May 24, 2025 at 1:57 AM, Szarka Adrián : Be írtuk jegyzete onnan másoltuk ki hogy biztos jó legyen. Maga a nyelv választás se jön be amikor be akarunk lépni és a belépésre nem reagál. May 24, 2025 at 1:58 AM, Szarka Adrián : Akkor megpróbáljuk később. Hat ha jó lesz. Köszönöm May 24, 2025 at 1:59 AM, Csanálosi Gábor FA : A num lock ha be van kapcsolva, ezeknél a pici billentyűzetnél, akkor a kék szimbólumos funkciók működnek, szaladtam már alá, azt lesd meg. May 24, 2025 at 2:00 AM, Csicskovics Balázs : Urak. A LOGIN gomb nem reagál!!! May 24, 2025 at 2:00 AM, Csanálosi Gábor FA : Ahh. Akkor passz. May 24, 2025 at 2:09 AM, Hakim/Ivancsa FA : This message was deleted. May 24, 2025 at 2:10 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.9 m coater line 1 rw 1- success (820) coater line 1 rw 2-success (990) May 24, 2025 at 2:24 AM, Szücs Géza FT-B : szerintem IT, vagy próbáljatok másik kioskot May 24, 2025 at 2:40 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8 m coater line 1 rw 1- success (1086) coater line 1 rw 2-success (988) May 24, 2025 at 2:46 AM, Rácz Dániel / FA : Mi az a kiosk ? May 24, 2025 at 2:48 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (600) coater line 1 rw 2-success (650) May 24, 2025 at 2:51 AM, Szücs Géza FT-B : olyan lehet mint a gyros, asszem May 24, 2025 at 2:53 AM, Rácz Dániel / FA : Az a görög vagy a török verzió ? May 24, 2025 at 2:55 AM, Szücs Géza FT-B : Photo May 24, 2025 at 2:56 AM, Rácz Dániel / FA : Köszönöm a választ ! Szép estét ! May 24, 2025 at 2:59 AM, Szücs Géza FT-B : van még 😉👌👌 May 24, 2025 at 2:59 AM, Szücs Géza FT-B : Photo May 24, 2025 at 3:00 AM, Rácz Dániel / FA : Köszönöm uram ! 🫡 May 24, 2025 at 3:13 AM, Osman/ "Ivancsa FA" : (result) pv-cathode Length of electrode is 3001.8 m coater line 1 rw 1- success (700) coater line 1 rw 2-success (1100) May 24, 2025 at 3:19 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (600) coater line 1 rw 2-success (800) May 24, 2025 at 3:22 AM, Nagy Dávid 4 : Anod slitt 3 conveer stop help help köszönöm szépen May 24, 2025 at 3:23 AM, Szarka Adrián : Teljes konvejor le van állva nem viszi el a reelt a lift May 24, 2025 at 3:23 AM, Rácz Dániel / FA : Jövök May 24, 2025 at 3:23 AM, Szarka Adrián : Slitt 6 nal May 24, 2025 at 3:23 AM, Szarka Adrián : Köszönöm May 24, 2025 at 3:24 AM, Rácz Dániel / FA : Ok May 24, 2025 at 3:25 AM, Osman/ "Ivancsa FA" : @FA Please come to the coating cathode warehouse because Roller number 4 is not working. May 24, 2025 at 3:26 AM, Rácz Dániel / FA : @Szücs Géza FT-B please check May 24, 2025 at 3:29 AM, Szücs Géza FT-B : STKA52 le van terhelve eléggé. ezért lassan visz ki üreset és telit lassan visz be. May 24, 2025 at 3:30 AM, Szücs Géza FT-B : STKC34? May 24, 2025 at 3:31 AM, Osman/ "Ivancsa FA" : Yes May 24, 2025 at 3:32 AM, Szarka Adrián : Már megy is köszönjük (thumbsup)(thumbsup)(thumbsup)(thumbsup) May 24, 2025 at 3:39 AM, Hakim/Ivancsa FA : (result) pv-Anode Length of electrode is 3001.8m coater line 1 rw 1- success (572) coater line 1 rw 2-success (800) May 24, 2025 at 3:40 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 24, 2025 at 3:41 AM, Szücs Géza FT-B : @VK (mcs) RBC0458, where was this Roll destination? May 24, 2025 at 3:41 AM, Nagy Dávid 4 : Katod slitt 2 20 perce nincsen agv help help köszönöm szépen May 24, 2025 at 3:42 AM, VK (mcs) : Checking May 24, 2025 at 3:45 AM, VK (mcs) : Job created by OP action from STKC33 to the STKC33-P01 May 24, 2025 at 3:46 AM, Szücs Géza FT-B : Thank You very much!!!! May 24, 2025 at 3:50 AM, Szücs Géza FT-B : srácok, ez az össze vissza pakolgatás, operátor meg sehol @Nagy Dávid 4 help help ezé nem megy a pressre meg a slittre anyag, mert a kikért áruk megállítják a folyamatokat May 24, 2025 at 3:52 AM, Szücs Géza FT-B : @Szarka Adrián May 24, 2025 at 3:54 AM, Szarka Adrián : @Nagy Dávid 4 nézd meg kerlek May 24, 2025 at 3:54 AM, Szarka Adrián : Össze vissza pakolas is sajnos ki volt adva ma estére kivesz és vissza küld May 24, 2025 at 3:55 AM, Szarka Adrián : El hiheted hogy nem jó kedvünkbe csináljuk ezt a roll raktárban és a reel raktárban May 24, 2025 at 3:55 AM, Szücs Géza FT-B : elhiszem, de: 1. akkor Legyen itt az akinek ez a dolga 2. annyit kérjen ki, amennyit meg is csinál May 24, 2025 at 3:56 AM, Hakim/Ivancsa FA : Sorry it's cathode* May 24, 2025 at 3:57 AM, Szarka Adrián : Annyit kert ki 3 darab. Ki küldtem szünetre amíg nem megy a raktár. Mert ne akkor menjen ki mire kész lesz May 24, 2025 at 4:04 AM, 김대호 (Kim Dae Ho) : Cathode slitet 2 Is Agv on its way? @VK (mcs) May 24, 2025 at 4:05 AM, Rácz Dániel / FA : @Nagy Dávid 4 gyere légyszíves An slitt 1 May 24, 2025 at 4:05 AM, Szücs Géza FT-B : @VK (mcs) can you send RBC0458 E1SLC030_P01? and RBC1573 to SLC020_P01? Thank You. May 24, 2025 at 4:06 AM, Nagy Dávid 4 : Megyek May 24, 2025 at 4:07 AM, Erik Gerzsenyi : Katod slitt 3 u/w robot kiallt hiabara May 24, 2025 at 4:07 AM, Erik Gerzsenyi : Nezzetek meg legyszi May 24, 2025 at 4:07 AM, VK (mcs) : No.job canceled at 3:52:20. May 24, 2025 at 4:08 AM, VK (mcs) : Checking May 24, 2025 at 4:08 AM, Szücs Géza FT-B : and can i change the RBC1586 order, not to STKC33, change to STKC31 please. May 24, 2025 at 4:10 AM, 김대호 (Kim Dae Ho) : Who canceled it? May 24, 2025 at 4:10 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success (780) coater line 1 rw 2-success (760) May 24, 2025 at 4:10 AM, VK (mcs) : RBC0458 there is not mapping info in MES. Are still wanna transfer it to Slitter 3? May 24, 2025 at 4:11 AM, VK (mcs) : Checking May 24, 2025 at 4:12 AM, Szücs Géza FT-B : @Nagy Dávid 4 SL said he should go there May 24, 2025 at 4:13 AM, 김대호 (Kim Dae Ho) : Cathode sliter 3 Please check the error. @Fa May 24, 2025 at 4:14 AM, 김대호 (Kim Dae Ho) : I need a reason for canceling it. And even if it's canceled, can you tell me why the next roll isn't coming? May 24, 2025 at 4:15 AM, VK (mcs) : I will check it. Please wait a moment May 24, 2025 at 4:15 AM, Hakim/Ivancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (700) coater line 1 rw 2-success (700) May 24, 2025 at 4:16 AM, Czeilinger Krisztián : Cheking. May 24, 2025 at 4:16 AM, VK (mcs) : RBC1573 location is STKC33 in BP and direction is input right now. If I create a job it will terminated. May 24, 2025 at 4:18 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA please check STKC roll WH area May 24, 2025 at 4:18 AM, VK (mcs) : Destination changed automatically to STKC34 May 24, 2025 at 4:20 AM, Szücs Géza FT-B : 😮 May 24, 2025 at 4:22 AM, Szücs Géza FT-B : RBC0458 and RBC1573 It must be removed from the port, because this is how the STK stopped. May 24, 2025 at 4:22 AM, 김대호 (Kim Dae Ho) : It has been about an hour since the facility stopped. Please check first and return it. May 24, 2025 at 4:24 AM, Szücs Géza FT-B : It's possible that STKC33 has the goods you need for Slitt 3! May 24, 2025 at 4:29 AM, VK (mcs) : Can you please store them in STK. I tried by MCS but it terminated. May 24, 2025 at 4:31 AM, 김지수PM(Gyuri)_FA : This message was deleted. May 24, 2025 at 4:32 AM, 김지수PM(Gyuri)_FA : Cargoes(RBC0458, RBC1573)are exist on the port right? May 24, 2025 at 4:32 AM, VK (mcs) : Yes. Please store them inside the STK. Right now they blocked the others way May 24, 2025 at 4:34 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 1, 2호기 Agv 반송대기중입니다. 2호기는 비가동이 1시간이 다 되었습니다. 확인좀해주세요!!!!!!!!!!!!! @mcs @rtd all May 24, 2025 at 4:34 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 확인해주세요 May 24, 2025 at 4:35 AM, VK (mcs) : Job assigned at 2:54 and reply were successful but storage doesn't transfer it at 3:52 job canceled by op action. After canceling job RTD needs a LR again. May 24, 2025 at 4:35 AM, Szücs Géza FT-B : yes, and blocked the stkc33.... May 24, 2025 at 4:37 AM, 김지수PM(Gyuri)_FA : CS member will check this one, seems like impossible to change output mode to input mode on 4018 track... May 24, 2025 at 4:37 AM, 김대호 (Kim Dae Ho) : Why are you telling me that now? Please let me know why it was canceled. I requested L/R, so please check again. May 24, 2025 at 4:39 AM, VK (mcs) : There is an issue in STKC33. Jobs assigned. After fixing material will transfer. May 24, 2025 at 4:40 AM, VK (mcs) : @FA please check cathode roll STK C34 port 1 It is out of service. May 24, 2025 at 4:40 AM, Szücs Géza FT-B : working on it.... May 24, 2025 at 4:43 AM, Hakim/Ivancsa FA : This message was deleted. May 24, 2025 at 4:44 AM, VK (mcs) : The reason can checked by SCS team. MCS side was fine and we received success command. May 24, 2025 at 4:46 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.9m and 3001.8m coater line 1 rw 1- success (700) coater line 1 rw 2-success (1090) May 24, 2025 at 4:47 AM, KIM SEYEON [김세연]_FA : @김대호 (Kim Dae Ho) 조장님 양극 슬리터 호기별로 몇시부터 자재가 안오고 있나요? ㄴ슬리터 1호기 ㄴ슬리터 2호기 ㄴ슬리터 3호기 May 24, 2025 at 4:47 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (660) coater line 1 rw 2-success (750) May 24, 2025 at 4:48 AM, Szücs Géza FT-B : done May 24, 2025 at 4:53 AM, 김대호 (Kim Dae Ho) : 좀전에 L/R 재요청으로 시간이 리셋되었습니다. 대략적인 시간은 1호기는 약 30분, 2호기는 1시간 30분 이상 입니다. 3호기는 Rtd 반송중입니다.(4m 자재) May 24, 2025 at 4:58 AM, Szücs Géza FT-B : @VK (mcs) can you check who creating order for RBC0458? May 24, 2025 at 5:00 AM, VK (mcs) : user ID is operator ! May 24, 2025 at 5:03 AM, Szücs Géza FT-B : 3 kikérésből, 2 megállított 2 rsktárat May 24, 2025 at 5:06 AM, Hakim/Ivancsa FA : Cathode coating Rw 2 Card2- 01 position mode complete position abnormal May 24, 2025 at 5:06 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please include this in daily report . if operator need authority to make and cancel jobs? May 24, 2025 at 5:06 AM, Hakim/Ivancsa FA : @fa can you come and check please May 24, 2025 at 5:08 AM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 양극 코터 확인 부탁드립니다. May 24, 2025 at 5:16 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (800) coater line 1 rw 2-success (850) May 24, 2025 at 5:19 AM, 조성준/samkoo/공정-FA : 코터 이상 없습니다 방글라데시 직원이 창고가 이상하다고 보냈다는데 이상없습니다 May 24, 2025 at 5:20 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 확인 감사드립니다 May 24, 2025 at 5:23 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success (1055) coater line 1 rw 2-success (1900) The rw is late because of the Position mode complete Position abnormal problem May 24, 2025 at 5:23 AM, Szücs Géza FT-B : ok we need change direction of the ports in roll wh May 24, 2025 at 5:38 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success (694) coater line 1 rw 2-success (702) May 24, 2025 at 5:43 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (520) coater line 1 rw 2-success (530) May 24, 2025 at 5:46 AM, KIM SEYEON [김세연]_FA : @김대호 (Kim Dae Ho) 조장님 금일과 같이 프레스 슬리터 롤반송 지연시 죄송하지만 한국어랑 영어로 동시에 공지해주시겠어요? Ex) 양극 슬리터 1호기 LR 반송지연 ㄴ 최초 LR : 몇시몇분 @FA한국테크니션 @FA shift leader May 24, 2025 at 5:48 AM, 김대호 (Kim Dae Ho) : 네 Pm님 알겠습니다. @장정훈 @지찬우 @조혜근 May 24, 2025 at 5:51 AM, 이민재 : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM Samkoo 이민재 최기수 May 24, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime, 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 24, 2025 at 6:13 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (958) coater line 1 rw 2-success (883) May 24, 2025 at 6:28 AM, usman/vancsa FA : This message was deleted. May 24, 2025 at 6:29 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success (730) coater line 1 rw 2-success (553) May 24, 2025 at 6:32 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 24, 2025 at 7:05 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(750) coater line 1 rw 2-success (630) May 24, 2025 at 7:07 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 3115.9m coater line 1 rw 1- success (manual) coater line 1 rw 2-success (manual) May 24, 2025 at 7:31 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(662) coater line 1 rw 2-success (538) May 24, 2025 at 7:33 AM, 장정훈 : @KIM SEYEON [김세연]_FA @MCS @FA @이주봉PM LEE JUBONG(FA) @김건희 There is a delay in getting the Anod slitter empty tray, the empty tray is too crowded to one side, so Rack TO Rack return increased May 24, 2025 at 7:38 AM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (996) coater line 1 rw 2-success (700) May 24, 2025 at 7:47 AM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please send empty tray accordingly May 24, 2025 at 7:56 AM, Sazzad Bhai SKon : We'll monitor the transportation May 24, 2025 at 8:03 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(630) coater line 1 rw 2-success (524) May 24, 2025 at 8:08 AM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (832) coater line 1 rw 2-success (1066) May 24, 2025 at 8:35 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success (595) coater line 1 rw 2-success (468) May 24, 2025 at 8:37 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(manual) coater line 1 rw 2-success (manual) May 24, 2025 at 8:59 AM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- manual coater line 1 rw 2- manual May 24, 2025 at 9:21 AM, Szeitz Flórián : Sziasztok! Anód slitt 1 re kérnék segítséget. May 24, 2025 at 9:21 AM, Szeitz Flórián : Slitt 2* May 24, 2025 at 9:31 AM, cehmannzsoltcehmann : Készen May 24, 2025 at 9:38 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success(620) coater line 1 rw 2- success(390) May 24, 2025 at 10:06 AM, Tumee : (result) pv-Anode Length of electrode is 3232.5 coater line 1 rw 1- success(942) coater line 1 rw 2- manual May 24, 2025 at 10:17 AM, Tumee : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success (670) coater line 1 rw 2 - success (643) May 24, 2025 at 10:33 AM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success(746) coater line 1 rw 2- success(431) May 24, 2025 at 10:56 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(690) coater line 1 rw 2 - success(670) May 24, 2025 at 11:06 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success(460) coater line 1 rw 2- success(462) May 24, 2025 at 11:21 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(612) coater line 1 rw 2 - success(444) May 24, 2025 at 11:30 AM, Deepu Divan FA-Eng : Announcement in Boards: @김대호 (Kim Dae Ho) 조장님 금일과 같이 프레스 슬리터 롤반송 지연시 죄송하지만 한국어랑 영어로 동시에 공지해주시겠어요? Ex) 양극 슬리터 1호기 LR 반송지연 ㄴ 최초 LR : 몇시몇분 @FA한국테크니션 @FA shift leader May 24, 2025 at 11:33 AM, Vörös Geri : Katód assy raktár 10 port nem akarja elvinni az anyagot.megnèznètek?köszi May 24, 2025 at 11:38 AM, Szeitz Flórián : Katód Slitt 1 re gyertek légyszives leszedő kar nem megymn May 24, 2025 at 11:38 AM, Szeitz Flórián : Köszönöm May 24, 2025 at 11:40 AM, Mr.Miti (미티) FA : Megyünk May 24, 2025 at 11:47 AM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success(525) coater line 1 rw 2- success(528) May 24, 2025 at 11:50 AM, Mr.Miti (미티) FA : Kesz May 24, 2025 at 11:50 AM, Mr.Miti (미티) FA : Ez is kész May 24, 2025 at 11:57 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1-success(1160) coater line 1 rw 2 - success(920) May 24, 2025 at 12:07 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- success(590) coater line 1 rw 2- success(688) May 24, 2025 at 12:24 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success(584) coater line 1 rw 2 - success(703) May 24, 2025 at 12:27 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1- manual coater line 1 rw 2- manual May 24, 2025 at 12:47 PM, Vörös Geri : Anód press 4 mellett a 23 -as AGV ki ált hibára. Megnéznétek?köszi May 24, 2025 at 12:47 PM, Mr.Miti (미티) FA : Meg igen. May 24, 2025 at 1:00 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success(585) coater line 1 rw 2- success(570) May 24, 2025 at 1:03 PM, Szeitz Flórián : Anód press 4 mögött kiállt hibára a 23as AGV. Légyszives Gyertek köszönöm May 24, 2025 at 1:07 PM, Tumee : (result) pv-Anode Length of electrode is 2901.8 coater line 1 rw 1 - success(590) coater line 1 rw 2 - success(688) May 24, 2025 at 1:08 PM, 최기수(GI SU CHOI) : Done May 24, 2025 at 1:16 PM, Tumee : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success(480) coater line 1 rw 2 - success(317) May 24, 2025 at 1:25 PM, cehmannzsoltcehmann : This message was deleted. May 24, 2025 at 1:26 PM, cehmannzsoltcehmann : Megy már May 24, 2025 at 1:26 PM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(606) coater line 1 rw 2 - success(460) May 24, 2025 at 1:39 PM, Vörös Geri : Katód slitt 2 AGV probléma May 24, 2025 at 1:49 PM, Tumee : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success(475) coater line 1 rw 2 - success(398) May 24, 2025 at 1:49 PM, cehmannzsoltcehmann : Készen May 24, 2025 at 1:58 PM, Tumee : (result) pv-Anode Length of electrode is 2901.6m coater line 1 rw 1 - success(536) coater line 1 rw 2 - success(350) May 24, 2025 at 2:25 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1- success(613) coater line 1 rw 2 - success(810) May 24, 2025 at 2:25 PM, Sárvári Márk : FA kollégát kérjük az Anod 1re, köszönöm✌️ May 24, 2025 at 2:26 PM, Mr.Miti (미티) FA : Megyünk May 24, 2025 at 2:32 PM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(1405) coater line 1 rw 2 - success(442) May 24, 2025 at 2:53 PM, Tumee : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(415) coater line 1 rw 2 - success(620) May 24, 2025 at 2:54 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 2661m coater line 1 rw 1- success(549) coater line 1 rw 2 - success(560) May 24, 2025 at 3:22 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 2661m coater line 1 rw 1- success(519) coater line 1 rw 2 - success(630) May 24, 2025 at 3:30 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(407) coater line 1 rw 2 - success(575) May 24, 2025 at 3:47 PM, usman/vancsa FA : (result) pv-cathode Length of electrode is 2661m coater line 1 rw 1- success(500) coater line 1 rw 2 - success(443) May 24, 2025 at 4:11 PM, duzzaman Md (MCS) : @FA Please check EOCNVA51_06_041 Data missmatch Error Thank you! May 24, 2025 at 4:11 PM, duzzaman Md (MCS) : Please check on priority basis May 24, 2025 at 4:15 PM, Tumee : (result) pv-Anode Length of electrode is 2663.4m coater line 1 rw 1 - success(330) coater line 1 rw 2 - success(350) May 24, 2025 at 4:16 PM, Tumee : result) pv-cathode Length of electrode is 30018.8m coater line 1 rw 1- success(720) coater line 1 rw 2 - success(325) May 24, 2025 at 4:18 PM, Mr.Miti (미티) FA : Solved May 24, 2025 at 4:41 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 931.6m coater line 1 rw 1 - manual coater line 1 rw 2 - manual May 24, 2025 at 4:42 PM, Tumee : result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(485) coater line 1 rw 2 - success(457) May 24, 2025 at 5:14 PM, usman/vancsa FA : result) pv-cathode Length of electrode is 3001.8 coater line 1 rw 1- success(568) coater line 1 rw 2 - success(417) May 24, 2025 at 5:20 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(530) coater line 1 rw 2 - success(490) May 24, 2025 at 5:31 PM, Szeitz Flórián : Sziasztok! Anód slittre nem érkeznek az üres tálcàk . Légyszives nézzétek meg az okát. Köszönöm May 24, 2025 at 5:32 PM, duzzaman Md (MCS) : Checking May 24, 2025 at 5:34 PM, duzzaman Md (MCS) : Materials are on the way. May 24, 2025 at 5:43 PM, usman/vancsa FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(620) coater line 1 rw 2 - success(580) May 24, 2025 at 5:59 PM, Hakim/Ivancsa FA : 24 may Night shift 18.00-6.00 @Hakim/Ivancsa FA @Osman/ "Ivancsa FA" May 24, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23á4. "B" műszak, 12+2/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(0): Shift Change(0): Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(2): 방혁_이반차 (Bang Hyuk May 24, 2025 at 6:00 PM, Nagy Dávid 4 : anod slitt 2 nincs talca Help help köszönöm szépen May 24, 2025 at 6:00 PM, Viktoriia Hleba : Sziasztok anod slitt 2 nincs talca May 24, 2025 at 6:01 PM, Szücs Géza FT-B : @mcs please May 24, 2025 at 6:04 PM, VK (mcs) : Good evening. I am working on it. May 24, 2025 at 6:18 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(520) coater line 1 rw 2 - success(770) May 24, 2025 at 6:21 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(800) coater line 1 rw 2 - success(810) May 24, 2025 at 6:26 PM, Viktoriia Hleba : anode convejor ( lift ) stop. Kérem, nézze meg! Köszönöm May 24, 2025 at 6:27 PM, Szarka Adrián : @Szücs Géza FT-B Sziasztok Katod Slitt 3 a nagyon fontos Anod Slitt 1-2 a nagyon fontos Köszi May 24, 2025 at 6:37 PM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián nézzétek meg légyszi May 24, 2025 at 6:39 PM, 조혜근 : 음극 슬리터 2호기 공트레이 부족합니다. 그리고 2층 컨베이어 릴이 창고로 못 들어가고있습니다. The anode slitter unit 2 is running low on empty trays. And the 2nd floor conveyor reel is not entering the warehouse. May 24, 2025 at 6:40 PM, 조혜근 : 확인 부탁 드립니다 May 24, 2025 at 6:46 PM, 방혁 PM(Bang.Hyuk) FA : 확인중입니다. 조금만 기다려주세요 May 24, 2025 at 6:46 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(550) coater line 1 rw 2 - success(740) May 24, 2025 at 6:51 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(700) coater line 1 rw 2 - success(735) May 24, 2025 at 7:02 PM, 김지수PM(Gyuri)_FA : 1F 음극 릴 먼저 나오도록 조정하였습니다. May 24, 2025 at 7:03 PM, Csicskovics Balázs : Anode assy raktár a földszinten, elakadt egy tálca. Segítséget kérnénk! Köszönöm May 24, 2025 at 7:05 PM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8052) Run time over. May 24, 2025 at 7:05 PM, 조혜근 : 확인 감사합니다 May 24, 2025 at 7:06 PM, Csanálosi Gábor FA : Checking May 24, 2025 at 7:07 PM, Csanálosi Gábor FA : Done May 24, 2025 at 7:22 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(700) coater line 1 rw 2 - success(790) May 24, 2025 at 7:22 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(630) coater line 1 rw 2 - success(970) May 24, 2025 at 7:28 PM, Hakim/Ivancsa FA : Anode EostkA34 Homstand t axis rls error Can you check @fa May 24, 2025 at 7:35 PM, Hakim/Ivancsa FA : Solved thanks May 24, 2025 at 7:46 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(700) May 24, 2025 at 7:51 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(900) coater line 1 rw 2 - success(700) May 24, 2025 at 8:07 PM, Szappanos Gábor : Coating fóliaraktár ajtaja ki van szakadva. Balesetveszélyes!!! Légyszíves nézzétek meg, ha hozzátok tartozik. May 24, 2025 at 8:08 PM, Szappanos Gábor : A zsanérok elvannak törve May 24, 2025 at 8:09 PM, Szappanos Gábor : Köszi May 24, 2025 at 8:16 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(1000) coater line 1 rw 2 - success(900) May 24, 2025 at 8:18 PM, Szücs Géza FT-B : rendben May 24, 2025 at 8:18 PM, Szücs Géza FT-B : E0STKC35 working again May 24, 2025 at 8:21 PM, Osman/ "Ivancsa FA" : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(750) May 24, 2025 at 8:32 PM, Szappanos Gábor : Coating fóliaraktár daru letiltott. Legyetek szívessek megnézni. Köszi May 24, 2025 at 8:33 PM, Szücs Géza FT-B : @Rácz Dániel / FA légyszives May 24, 2025 at 8:36 PM, 송태용(Song tae yong) : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(580) coater line 1 rw 2 - success(600) May 24, 2025 at 8:53 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(750) May 24, 2025 at 8:54 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) PLEASE CHECK E1SLA020_P01 command status May 24, 2025 at 8:56 PM, VK (mcs) : LR received RBA1842 assigned and now it's on STKA34. waiting for AGV. May 24, 2025 at 8:59 PM, Viktoriia Hleba : 2-3 slitter anode nincs talca May 24, 2025 at 8:59 PM, Viktoriia Hleba : Please check May 24, 2025 at 9:03 PM, 방혁 PM(Bang.Hyuk) FA : @제조 음극 슬리터 3호기 사용안하는건가요..? LR신호 올라온게 없습니다 May 24, 2025 at 9:05 PM, 김대호 (Kim Dae Ho) : @조혜근 확인 부탁드립니다. May 24, 2025 at 9:06 PM, 조혜근 : 사용하고있습니다. 확인 해보겠습니다 May 24, 2025 at 9:08 PM, 방혁 PM(Bang.Hyuk) FA : 음극 슬리터 2호기 자재는 AGV18이 작업할당받아 이동중입니다. 곧 공급될겁니다 May 24, 2025 at 9:11 PM, 조혜근 : 네 확인 감사합니다 May 24, 2025 at 9:13 PM, 조혜근 : 음극 슬리터 3호기는 현재 트레이 공급이 원활하지 않아서 UNLOAD를 못하기 때문에 UW도 롤이 소진되지 않아서 A/B터렛 및 버퍼에 롤이 FULL 상태입니다 May 24, 2025 at 9:14 PM, 조혜근 : 공트레이가 바로바로 도착하면 UNLOAD도 원할하게 진행될것이고 UW쪽도 버퍼가 비워지면 LR이 진행될것같습니다. May 24, 2025 at 9:15 PM, 방혁 PM(Bang.Hyuk) FA : 지금 릴창고 과부화상태라 빈트레이 공급이 원할하지 못합니다...시간이 좀 더 소요될것같습니다 May 24, 2025 at 9:17 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(880) coater line 1 rw 2 - success(1000) May 24, 2025 at 9:18 PM, 조혜근 : 네 확인 감사합니다 May 24, 2025 at 9:20 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(700) May 24, 2025 at 9:22 PM, Szarka Adrián : ? May 24, 2025 at 9:22 PM, Nagy Dávid 4 : Anod slitt 1 tálca hiány van help help help köszönöm szépen May 24, 2025 at 9:26 PM, Czeilinger Krisztián : Rendben van. May 24, 2025 at 9:31 PM, Czeilinger Krisztián : Valóban lassan jönnek az üres tálcák mert a E0STK -A 51 daru (77% leterheltséget mutat. May 24, 2025 at 9:32 PM, Nagy Dávid 4 : Köszönöm szépen az infót (thumbsup) May 24, 2025 at 9:35 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(500) coater line 1 rw 2 - success(740) May 24, 2025 at 9:54 PM, Viktoriia Hleba : Anod slitter 1 ninsc tálca May 24, 2025 at 9:55 PM, Viktoriia Hleba : 1-2 slitter anode nincs tálca May 24, 2025 at 9:56 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(765) coater line 1 rw 2 - success(1000) May 24, 2025 at 9:57 PM, Czeilinger Krisztián : A tálcák mennek csak lassan . May 24, 2025 at 10:03 PM, 조혜근 : Please check if LR signal entered the UW of cathode Slitter Unit 3 May 24, 2025 at 10:06 PM, VK (mcs) : LR received and job assigned. Carrier is on the AGV 21 May 24, 2025 at 10:07 PM, 조혜근 : Thank you for the confirmation May 24, 2025 at 10:13 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(700) May 24, 2025 at 10:31 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.6m coater line 1 rw 1 - success(1400) coater line 1 rw 2 - success(1660) May 24, 2025 at 10:40 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(630) May 24, 2025 at 10:53 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(690) coater line 1 rw 2 - success(750) May 24, 2025 at 11:16 PM, Szarka Adrián : Sziasztok anod reel raktárba szeretnénk segítséget kérni, egyik rell be ment a belső portra és 1 órája ott áll nem viszi el a daru. Legyszives nézzetek meg mi lehet a baj. Köszi May 24, 2025 at 11:16 PM, Szarka Adrián : 4 reel van hatra amit át kell nézni és utána végre kész lenne. May 24, 2025 at 11:17 PM, Böröcz Tamás : Jó lenne May 24, 2025 at 11:17 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(700) coater line 1 rw 2 - success(630) May 24, 2025 at 11:17 PM, Szarka Adrián : ? May 24, 2025 at 11:19 PM, Rácz Dániel / FA : LTA1099 ? May 24, 2025 at 11:22 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(555) coater line 1 rw 2 - success(675) May 24, 2025 at 11:28 PM, Böröcz Tamás : Elvileg el fog menni van order meg minden. May 24, 2025 at 11:28 PM, Rácz Dániel / FA : Oksa May 24, 2025 at 11:29 PM, Rácz Dániel / FA : 90 es May 24, 2025 at 11:29 PM, Rácz Dániel / FA : Niw waitinf May 24, 2025 at 11:29 PM, Szarka Adrián : Köszönöm May 24, 2025 at 11:29 PM, Rácz Dániel / FA : @mr acs May 24, 2025 at 11:31 PM, Rácz Dániel / FA : Mr@mr acs please May 24, 2025 at 11:32 PM, Rácz Dániel / FA : LTA1099 kapott egy manual ordert 90 percent prio May 24, 2025 at 11:32 PM, Rácz Dániel / FA : De ugyan úgy nem viszi el May 24, 2025 at 11:32 PM, Rácz Dániel / FA : Lehwt újra bekellene küldeni May 24, 2025 at 11:33 PM, Szarka Adrián : Ide tudnál jönni legyszives ? May 24, 2025 at 11:34 PM, Rácz Dániel / FA : Jövünk May 24, 2025 at 11:35 PM, Szarka Adrián : Most viszi el May 24, 2025 at 11:38 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(650) coater line 1 rw 2 - success(600) May 24, 2025 at 11:40 PM, Szarka Adrián : Anod Press 3 Rw agv meg állt gyertek legyszi May 24, 2025 at 11:40 PM, Szarka Adrián : Köszi May 24, 2025 at 11:41 PM, Nagy Dávid 4 : Press 4 bocsi elirta (thumbsup) May 24, 2025 at 11:48 PM, Rácz Dániel / FA : Jövök May 24, 2025 at 11:49 PM, Rácz Dániel / FA : Köszi fiúk @Szarka Adrián @Nagy Dávid 4 May 24, 2025 at 11:51 PM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(565) coater line 1 rw 2 - success(745) May 24, 2025 at 11:51 PM, Szarka Adrián invited Dana Honak. May 25, 2025 at 12:02 AM May 25, 2025 at 12:02 AM, Szücs Géza FT-B : kész May 25, 2025 at 12:02 AM, Szücs Géza FT-B : StK001 working again May 25, 2025 at 12:09 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(700) May 25, 2025 at 12:18 AM, Szappanos Gábor : Anód 1 A oldalon letiltott az egyik agv. Legyetek szívessek megnézni May 25, 2025 at 12:18 AM, Osman/ "Ivancsa FA" : @FA Please come to the coating cathode warehouse stkc34 is not working May 25, 2025 at 12:19 AM, Osman/ "Ivancsa FA" : Error : Auto step#01 time over May 25, 2025 at 12:26 AM, Osman/ "Ivancsa FA" : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(650) coater line 1 rw 2 - success(1000) May 25, 2025 at 12:27 AM, Dana Honak : Cathode 2 slitt ninc AGW! May 25, 2025 at 12:34 AM, VK (mcs) : @FA Please check Cathode roll STKC34 Port 1 is out of service. May 25, 2025 at 12:38 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(550) coater line 1 rw 2 - success(670) May 25, 2025 at 12:39 AM, Csicskovics Balázs : Press 2 cathode, nincs AGV 15 perc, u/w Nézzétek meg légyszíves Köszönöm May 25, 2025 at 12:40 AM, Pálosi Róbert : Korea technician is work May 25, 2025 at 12:41 AM, VK (mcs) : Job assigned from STKC34 which is out of service now. @FA team are working on it. Please wait. Thx May 25, 2025 at 12:42 AM, Szarka Adrián : Katod Slitt 2 nincs agv May 25, 2025 at 12:42 AM, Czeilinger Krisztián : Nincs order még rá,látjuk hogy a kérelem meg van nyomva. May 25, 2025 at 12:42 AM, VK (mcs) : I Job assigned from STKC34 which is out of service now. @FA team are working on it. Please wait. Thx May 25, 2025 at 12:42 AM, Szarka Adrián : Akkor csinálok egy újra indítás May 25, 2025 at 12:43 AM, Czeilinger Krisztián : Rendben. May 25, 2025 at 12:44 AM, Szarka Adrián : Most ? May 25, 2025 at 12:47 AM, Czeilinger Krisztián : Pillanat. May 25, 2025 at 12:50 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(750) coater line 1 rw 2 - success(900) May 25, 2025 at 1:04 AM, Czeilinger Krisztián : A slitt2 C-re. Viszi el az 1 es AGV. May 25, 2025 at 1:05 AM, Szarka Adrián : Köszönöm szépen May 25, 2025 at 1:07 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(530) coater line 1 rw 2 - success(780) May 25, 2025 at 1:14 AM, Dana Honak : Cathode slitt 1 AGW ninc 28 perc May 25, 2025 at 1:15 AM, Dana Honak : Slitt2 May 25, 2025 at 1:16 AM, Czeilinger Krisztián : Nézem. May 25, 2025 at 1:17 AM, Czeilinger Krisztián : Pont a határban van az anyag May 25, 2025 at 1:18 AM, Dana Honak : Már úton is van, köszönöm. May 25, 2025 at 1:18 AM, Anton Mashchenko : Hello, cathode press 3 AGV not coming 10 min! Help! Thanks! May 25, 2025 at 1:20 AM, VK (mcs) : Material is in STKC34 output port and waiting for AGV. May 25, 2025 at 1:24 AM, Czeilinger Krisztián : A 9-es AGV megy a Cathode press 3-ra. May 25, 2025 at 1:27 AM, Hakim/Ivancsa FA : StkC31 14 HOIST exact position error after forking @fa please can you check May 25, 2025 at 1:27 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(980) coater line 1 rw 2 - success(960) May 25, 2025 at 1:27 AM, Hakim/Ivancsa FA : @fa please check May 25, 2025 at 1:29 AM, Hakim/Ivancsa FA : Roll STKC31 Cathode site Alarm- 14 HOIST exact position error after forking May 25, 2025 at 1:30 AM, Rácz Dániel / FA : @Pálosi Róbert gyere ki 🫵 May 25, 2025 at 1:31 AM, Hakim/Ivancsa FA : This message was deleted. May 25, 2025 at 1:31 AM, Hakim/Ivancsa FA : Thank you May 25, 2025 at 1:32 AM, Hakim/Ivancsa FA : Solved May 25, 2025 at 1:43 AM, Hakim/Ivancsa FA : (result) pv-Anode Length of electrode is 3013.8m coater line 1 rw 1 - success(1200) coater line 1 rw 2 - success(1300) May 25, 2025 at 1:51 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(450) coater line 1 rw 2 - success(538) May 25, 2025 at 1:55 AM, 방혁 PM(Bang.Hyuk) FA : @조혜근 양극 슬리터 1호기 LR이 갑자기 사라졌는데 혹시 이유가 있을까요..? May 25, 2025 at 1:55 AM, 조혜근 : 확인 해보겠습니다 May 25, 2025 at 1:56 AM, 조혜근 : 라이트 커튼 감지돼있네요 May 25, 2025 at 1:57 AM, 방혁 PM(Bang.Hyuk) FA : 혹시 LR다시 올려주실수있을까요?? May 25, 2025 at 1:57 AM, 조혜근 : 근데 지금 알람은 빨간색으로 떠있는데 소리는 안나고있습니다. 혹시 소리 안 울리게 다 수정하였나요? May 25, 2025 at 1:58 AM, 조혜근 : 소리가 안 울리면 모르고 계속 비가동 생길수있어서 울리게 바꿔 주시면 감사할것같습니다 May 25, 2025 at 1:58 AM, 조혜근 : 넵 May 25, 2025 at 1:58 AM, 방혁 PM(Bang.Hyuk) FA : 인원 보내겠습니다! May 25, 2025 at 1:58 AM, 조혜근 : 넵 May 25, 2025 at 2:02 AM, 조혜근 : @FA The UW-side Lee Jae-gi of the cathode slitter unit 1 is stopped in the middle. Please check it. May 25, 2025 at 2:04 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B May 25, 2025 at 2:04 AM, 조혜근 : @FA The cathode slitter unit 2 RW 1ST tray is stuck in the conveyor. Please check it. May 25, 2025 at 2:04 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA Can you check it? May 25, 2025 at 2:05 AM, Szücs Géza FT-B : @Rácz Dániel / FA píííz May 25, 2025 at 2:05 AM, Csanálosi Gábor FA : @Rácz Dániel / FA pls May 25, 2025 at 2:06 AM, Rácz Dániel / FA : Boeing May 25, 2025 at 2:13 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(385) coater line 1 rw 2 - success(805) May 25, 2025 at 2:22 AM, Szücs Géza FT-B : All equipment is working May 25, 2025 at 2:22 AM, 조혜근 : Thank you May 25, 2025 at 2:23 AM, Hakim/Ivancsa FA : This message was deleted. May 25, 2025 at 2:24 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.9m coater line 1 rw 1 - success(500) coater line 1 rw 2 - success(620) May 25, 2025 at 2:36 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(450) coater line 1 rw 2 - success(500) May 25, 2025 at 2:50 AM, 방혁 PM(Bang.Hyuk) FA : 슬리터 양극 1호기 LR다시 확인부탁드립니다! May 25, 2025 at 2:52 AM, Viktoriia Hleba : 3 slitter anode nincs AGV May 25, 2025 at 2:54 AM, 방혁 PM(Bang.Hyuk) FA : AGV25 MOVING May 25, 2025 at 2:55 AM, Viktoriia Hleba : thanks May 25, 2025 at 2:57 AM, 방혁 PM(Bang.Hyuk) FA : @FA In front of AN Roll stocker AGV block each other Pls check May 25, 2025 at 3:00 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.9m coater line 1 rw 1 - success(960) coater line 1 rw 2 - success(1188) May 25, 2025 at 3:01 AM, Viktoriia Hleba : anod slitt 2 nincs talca . Please check May 25, 2025 at 3:02 AM, Viktoriia Hleba : 2-3 slitter anode May 25, 2025 at 3:03 AM, Viktoriia Hleba : anode convejor ( lift ) stop . May 25, 2025 at 3:06 AM, Viktoriia Hleba : 3 slitter anode - 20 perc nincs AGV May 25, 2025 at 3:06 AM, Osman/ "Ivancsa FA" : @ Fa Please come to the coating anode site emergency May 25, 2025 at 3:07 AM, 김지수PM(Gyuri)_FA : our cs engineer will check it. Thanks in advance May 25, 2025 at 3:13 AM, KIM SEYEON [김세연]_FA : could you describe more about it? May 25, 2025 at 3:15 AM, Szarka Adrián : Anod roll raktárban 7 darab agv megállt. Egymást fel tartva nem történik semmi. Így meg állt anod Press 1-2-4 Anod Slitt -3 May 25, 2025 at 3:15 AM, Szarka Adrián : Valaki megtudja csinálni ? May 25, 2025 at 3:16 AM, Csanálosi Gábor FA : @Pálosi Róbert May 25, 2025 at 3:16 AM, 김지수PM(Gyuri)_FA : Will be there with our cs engineer May 25, 2025 at 3:16 AM, Szarka Adrián : Most jött egy mester és a falon valamit újra indított. May 25, 2025 at 3:18 AM, Rácz Dániel / FA : ACS kommunikáció hiba lehetett May 25, 2025 at 3:19 AM, Szarka Adrián : Lehet. Jött még egy valaki nézik nagyon mert nem mozdulnak az agv. Köszönöm a gyors válaszokat (thumbsup)(thumbsup)(thumbsup)(thumbsup) May 25, 2025 at 3:21 AM, Szücs Géza FT-B : több AGV szürke, falon lévő AP-t indítsátok újra légyszives. AN coater 1nél AGV előtt van valaki vagy valami. May 25, 2025 at 3:21 AM, Czeilinger Krisztián : Tudjuk,folyamatban van. May 25, 2025 at 3:24 AM, Viktoriia Hleba : 1-2 slitter anode nincs tálca . May 25, 2025 at 3:24 AM, Viktoriia Hleba : Please check May 25, 2025 at 3:25 AM, VK (mcs) : I am working on it. May 25, 2025 at 3:28 AM, Osman/ "Ivancsa FA" : AGV has arrived late. It's time to roll out for this. But the problem is solved May 25, 2025 at 3:29 AM, Czeilinger Krisztián : Megyünk May 25, 2025 at 3:31 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(manual) coater line 1 rw 2 - success(manual) May 25, 2025 at 3:33 AM, 방혁 PM(Bang.Hyuk) FA : @조혜근 May 25, 2025 at 3:33 AM, Szarka Adrián : Nézd meg legyszives hogy anod Press 1 re fog e jönni agv ? Mert üres a gep May 25, 2025 at 3:33 AM, Czeilinger Krisztián : A tálcák most haladnak SL 1,2. May 25, 2025 at 3:33 AM, Szarka Adrián : Ha nem akkor újra kell indítani a robotot May 25, 2025 at 3:33 AM, 방혁 PM(Bang.Hyuk) FA : @조혜근 슬리터 양극 2호기 LR 확인부탁드립니다 May 25, 2025 at 3:33 AM, 방혁 PM(Bang.Hyuk) FA : 음극 1,2도 LR없습니다! May 25, 2025 at 3:34 AM, 조혜근 : 음극은 AGV가 느려서 수동으로 진행하고있습니다 May 25, 2025 at 3:34 AM, Czeilinger Krisztián : Nézem. May 25, 2025 at 3:34 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(500) coater line 1 rw 2 - success(500) May 25, 2025 at 3:34 AM, 방혁 PM(Bang.Hyuk) FA : 감사합니다 확인했습니다! May 25, 2025 at 3:35 AM, Czeilinger Krisztián : A 18 AGV viszi rollt. May 25, 2025 at 3:36 AM, Szarka Adrián : Köszönöm May 25, 2025 at 3:45 AM, 조혜근 : 양극 슬리터 2호기 LR 신호 들어갔을까요? May 25, 2025 at 3:45 AM, 방혁 PM(Bang.Hyuk) FA : 네 들어왔습니다 확인했습니다 May 25, 2025 at 3:46 AM, 조혜근 : 버퍼에 있는 롤을 UW로 옮기면 자동으로 LR들어가고있습니다. May 25, 2025 at 3:46 AM, 조혜근 : 혹시 시스템상으로 버퍼에 롤이 있는건 감지 안되나요? May 25, 2025 at 3:46 AM, 방혁 PM(Bang.Hyuk) FA : 약간의 딜레이가 있는것같습니다 May 25, 2025 at 3:47 AM, 방혁 PM(Bang.Hyuk) FA : AGV14 양극 슬리터 2호기로 화물들고 이동중입니다. May 25, 2025 at 3:47 AM, 조혜근 : 넵 알겠습니다 May 25, 2025 at 3:49 AM, Szarka Adrián : Anod reel raktár megállt legyszi nézze meg valaki ( kérjük ki a reeleket amiket le kell vágni selekjtbe ) köszönöm May 25, 2025 at 3:52 AM, Hakim/Ivancsa FA : This message was deleted. May 25, 2025 at 3:54 AM, Hakim/Ivancsa FA : @fa can you check please The roll of cathode Stkc35 has an error May 25, 2025 at 3:54 AM, Hakim/Ivancsa FA : And can't enter the password May 25, 2025 at 3:55 AM, Csanálosi Gábor FA : Jövök May 25, 2025 at 3:56 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(manual) coater line 1 rw 2 - success(manual) May 25, 2025 at 3:56 AM, Csanálosi Gábor FA : Mennek az anód reel raktárak May 25, 2025 at 3:56 AM, Szarka Adrián : @Szücs Géza FT-B anod roll raktárban még csinálják az agv gondot mert nem jó. Csak azért szólok mert nem tudom neked erről kell e írni valamit. May 25, 2025 at 3:57 AM, Szarka Adrián : Köszönöm a segítséget May 25, 2025 at 3:57 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(800) coater line 1 rw 2 - success(950) May 25, 2025 at 3:58 AM, Csanálosi Gábor FA : Igazán nincs mit, nem voltak hibában, mentek. May 25, 2025 at 3:59 AM, Szarka Adrián : Akkor bocsi. Opi szólt hogy baj van. Azért szóltam. Én még itt anod raktárnál. May 25, 2025 at 3:59 AM, Csanálosi Gábor FA : Nem para, arra jöttem visszafele May 25, 2025 at 4:26 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(794) coater line 1 rw 2 - success(829) May 25, 2025 at 4:30 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(950) coater line 1 rw 2 - success(650) May 25, 2025 at 4:47 AM, Rácz Dániel / FA : @Viktoriia Hleba Anód nagy c/v kevés az üres reel tálca May 25, 2025 at 4:51 AM, Böröcz Tamás : A feleslegesen legyártott reelek kivétele tovább lassítja a raktárak működését. De legalább nincs lehetőség feleslegesen legyártani. May 25, 2025 at 4:54 AM, Rácz Dániel / FA : @Osman/ "Ivancsa FA" @Hakim/Ivancsa FA Please check AN Coating #20 AGV, May 25, 2025 at 4:54 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.8m coater line 1 rw 1 - success(648) coater line 1 rw 2 - success(545) May 25, 2025 at 4:54 AM, Osman/ "Ivancsa FA" : @ FA Please come to the coating anode rw 1 Error : position move complete position abno May 25, 2025 at 4:56 AM, Hakim/Ivancsa FA : Solved May 25, 2025 at 5:02 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(manual) coater line 1 rw 2 - success(600) May 25, 2025 at 5:22 AM, Hakim/Ivancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(610) coater line 1 rw 2 - success(630) May 25, 2025 at 5:23 AM, Rácz Dániel / FA : мало May 25, 2025 at 5:27 AM, Hakim/Ivancsa FA : Is there any problem with it May 25, 2025 at 5:30 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 - success(600) coater line 1 rw 2 - success(700) May 25, 2025 at 5:43 AM, Rácz Dániel / FA : Fine May 25, 2025 at 5:59 AM, 이민재 : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM JI SEOKBEOM 지석범PM Samkoo 이민재 최기수 May 25, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) Technician, 1 Sl, 1 Overtime 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 25, 2025 at 6:01 AM, Saki /Iváncsa Fa : Good morning! 25 may day shift 6.00-18.00 —————————- @usman/vancsa FA @Saki /Iváncsa Fa May 25, 2025 at 6:21 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(403) coater line 1 rw 2 - success(566) May 25, 2025 at 6:25 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 -success(865) coater line 1 rw 2 - success(610) May 25, 2025 at 6:50 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2091.8m coater line 1 rw 1 -success(740) coater line 1 rw 2 - success(610) May 25, 2025 at 6:51 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(570) coater line 1 rw 2 - success(772) May 25, 2025 at 7:19 AM, Mohammad Amir : @FA Please check E0STKA52_C01/C02 these cranes are inactive without errors and Because of this Slitter empty trays delivery has affected. Thank you very much! May 25, 2025 at 7:21 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(730) coater line 1 rw 2 - success(580) May 25, 2025 at 7:25 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(575) coater line 1 rw 2 - success(824) May 25, 2025 at 7:27 AM, Mohammad Amir : @Mr.Miti (미티) FA Please take action on this issue,there will be shortages of Empty trays. Thank you very much! May 25, 2025 at 7:30 AM, 장정훈 : Now the production of Anode slitters is in a situation where it will be stopped. May 25, 2025 at 7:32 AM, Mohammad Amir : I am continuously manually realising empty trays from STKA51 as well so that production can continue. And as soon as FA will fix the STKA52 empty trays delivery speed will increase. Thank you very much! May 25, 2025 at 7:47 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check E0CNVA51_06_045 there is Port Interface error. Thank you! May 25, 2025 at 7:47 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(680) coater line 1 rw 2 - success(610) May 25, 2025 at 7:51 AM, Mr.Miti (미티) FA : Checking May 25, 2025 at 7:57 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1 - success(690) coater line 1 rw 2-success(1115) May 25, 2025 at 8:18 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(630) coater line 1 rw 2 - success(510) May 25, 2025 at 8:23 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1-success(1065) coater line 1 rw 2 - success(724) May 25, 2025 at 8:33 AM, Vlad Danilevskyi : Hello. Anode press 2 AGV RW error. Thanks May 25, 2025 at 8:33 AM, Vlad Danilevskyi : UW* May 25, 2025 at 8:49 AM, usman/vancsa FA : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(651) coater line 1 rw 2 - success(566) May 25, 2025 at 8:50 AM, usman/vancsa FA : (result) pv-cathode Length of electrode is 3001.7m coater line 1 rw 1-success(695) coater line 1 rw 2-success(922) May 25, 2025 at 9:00 AM, Szeitz Flórián : Gyertek légyszives az anód press 2 -re ,mert a robot ferdén tette rá a Roll-t a Buffer tárolóra ès ki is állt hibára , de addig mi a gépet nem tudjuk használni. És várnak . May 25, 2025 at 9:00 AM, Szeitz Flórián : Köszönöm May 25, 2025 at 9:01 AM, Mr.Miti (미티) FA : Persze megyünk May 25, 2025 at 9:20 AM, usman/vancsa FA : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(650) coater line 1 rw 2-success(1345) May 25, 2025 at 9:49 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2091.8m coater line 1 rw 1 - success(700) coater line 1 rw 2-success(548) May 25, 2025 at 9:55 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2992m coater line 1 rw 1-success(690) coater line 1 rw 2-success(870) May 25, 2025 at 10:02 AM, Szeitz Flórián : Sziasztok! Anód slitt 2 re nem érkezik az üres tálca légyszives nézzétek meg miért köszönöm May 25, 2025 at 10:03 AM, Mohammad Amir : Hello, Empty trays are in the way,I have given the priority ✅. Thank you! May 25, 2025 at 10:21 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2790m coater line 1 rw 1 - success(1200) coater line 1 rw 2-success(1033) May 25, 2025 at 10:25 AM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(693) coater line 1 rw 2-success(857) May 25, 2025 at 10:43 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1 - success(750) coater line 1 rw 2-success(640) May 25, 2025 at 10:46 AM, Oleksii Krasnoshchok : Hello anode slitt 1 problem with Agv u/w May 25, 2025 at 10:46 AM, Mr.Miti (미티) FA : Coming May 25, 2025 at 10:55 AM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(640) coater line 1 rw 2-success(837) May 25, 2025 at 10:58 AM, Mr.Miti (미티) FA : Solved. May 25, 2025 at 10:59 AM, Mohammad Amir : @FA @cehmannzsoltcehmann Please check E0STKC13_C01 there is Hoist Time over error. Thank you! May 25, 2025 at 11:03 AM, Mr.Miti (미티) FA : Checking May 25, 2025 at 11:07 AM, Lee Junghan(이정한)_CS : Solved May 25, 2025 at 11:07 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 11:23 AM, Vlad Danilevskyi : Hello. Anode press 2. AGV RW problem. Thank you May 25, 2025 at 11:26 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1 - success(1020) coater line 1 rw 2-success(950) May 25, 2025 at 11:27 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA52_C01/C02 these cranes are inactive without errors and Because of this Slitter empty trays delivery speed has been affected. Thank you very much! May 25, 2025 at 11:28 AM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(560) coater line 1 rw 2-success(815) May 25, 2025 at 11:29 AM, Mr.Miti (미티) FA : Checking May 25, 2025 at 11:42 AM, usman/vancsa FA : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1 success(758) coater line 1 rw 2-success(620) May 25, 2025 at 11:42 AM, Mr.Miti (미티) FA : Please cancel c01 job from the list May 25, 2025 at 11:43 AM, Mohammad Amir : Please give me carrier id. Thank you! May 25, 2025 at 11:44 AM, Mr.Miti (미티) FA : Lta1100 and lta 0069 May 25, 2025 at 11:44 AM, Mr.Miti (미티) FA : Need to cancel in scs May 25, 2025 at 11:46 AM, Mohammad Amir : Yes Please cancel from the SCS side as from MCS side cancel command is getting failed for these two carriers. Thank you very much! May 25, 2025 at 11:47 AM, Mr.Miti (미티) FA : Solved May 25, 2025 at 11:50 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 11:51 AM, Mr.Miti (미티) FA : Me too! May 25, 2025 at 11:54 AM, 최기수(GI SU CHOI) : @FA E0STKA31 AGV Retry count Exceeded err check please May 25, 2025 at 11:57 AM, Mr.Miti (미티) FA : Coming. May 25, 2025 at 11:58 AM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(695) coater line 1 rw 2-success(1012) May 25, 2025 at 12:00 PM, Mr.Miti (미티) FA : Solved May 25, 2025 at 12:13 PM, usman/vancsa FA : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(1075) coater line 1 rw 2-success(962) May 25, 2025 at 12:17 PM, Nazirov Eldar invited Kokhan Yurii. May 25, 2025 at 12:26 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(963) coater line 1 rw 2-success(658) May 25, 2025 at 12:40 PM, usman/vancsa FA : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(780) coater line 1 rw 2-success(586) May 25, 2025 at 12:55 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(648) coater line 1 rw 2-success(693) May 25, 2025 at 1:04 PM, usman/vancsa FA : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(610) coater line 1 rw 2-success(661) May 25, 2025 at 1:26 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-manual coater line 1 rw 2-manual May 25, 2025 at 1:34 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(555) coater line 1 rw 2-success(486) May 25, 2025 at 2:04 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (720) coater line 1 rw 2- success (1144) May 25, 2025 at 2:07 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(530) coater line 1 rw 2-success(660) May 25, 2025 at 2:48 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA52_C01/C02 these cranes are inactive without errors and Because of this Slitter empty trays delivery speed has been affected. Thank you very much! May 25, 2025 at 2:50 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (790) coater line 1 rw 2-success(1055) May 25, 2025 at 3:00 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success(586) coater line 1 rw 2-success(723) May 25, 2025 at 3:23 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode 2901m coater line 1 rw 1-success(stopped at 5.6 May 25, 2025 at 3:30 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success(620) coater line 1 rw 2-success(710) May 25, 2025 at 3:33 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA52_C01there is Load Oversize error. Thank you very much! May 25, 2025 at 3:33 PM, Szeitz Flórián : Sziasztok! Anód slitt re ismét nem jön tálca. Megnézzitek? Köszönöm May 25, 2025 at 3:34 PM, Mr.Miti (미티) FA : Rajta vagyok May 25, 2025 at 3:34 PM, Mohammad Amir : Currently STKA52 is having issues that's why you witnessed delay. However I am continuously manually transffering empty trays from STKA51 so that production can keep going. Thank you very much! May 25, 2025 at 3:38 PM, Mr.Miti (미티) FA : Solved. Kész. May 25, 2025 at 3:42 PM, Mohammad Amir : I have also provided extra priority to Anode Empty trays transfer from STKA52 on top of manual tranfer from STKA51. Hopefully CNVA51 will fill with empty trays. I am on it. Thank you very much! May 25, 2025 at 3:58 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success(934) coater line 1 rw 2-success(785) May 25, 2025 at 4:05 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2530m coater line 1 rw 1- success(520) coater line 1 rw 2-success(620) May 25, 2025 at 4:17 PM, Mohammad Amir : This message was deleted. May 25, 2025 at 4:19 PM, Mohammad Amir : For your information:- Now CNVA51 has filled with empty trays ✅ and there are enough empty trays available. I am monitoring. Thank you very much! May 25, 2025 at 4:21 PM, Mohammad Amir : @cehmannzsoltcehmann @FA Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you! May 25, 2025 at 4:25 PM, Mr.Miti (미티) FA : Checking May 25, 2025 at 4:30 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success(1050) coater line 1 rw 2-success(710) May 25, 2025 at 4:32 PM, Mr.Miti (미티) FA : Solved May 25, 2025 at 4:33 PM, Mohammad Amir : Köszönöm szepen! May 25, 2025 at 4:33 PM, Mr.Miti (미티) FA : You are welcome! May 25, 2025 at 5:03 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(810) coater line 1 rw 2-success(790) May 25, 2025 at 5:14 PM, Saki /Iváncsa Fa : This message was deleted. May 25, 2025 at 5:16 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 3207m coater line 1 rw 1- manual coater line 1 rw 2-manual May 25, 2025 at 5:37 PM, usman/vancsa FA : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(690) coater line 1 rw 2-success(805) May 25, 2025 at 5:39 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (590) coater line 1 rw 2- success (600) May 25, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.25. "B" műszak, 12+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(0): Sick(0): Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Harasztia Z May 25, 2025 at 6:09 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(600) coater line 1 rw 2-success(1100) May 25, 2025 at 6:10 PM, Viktor Vadas : Sziasztok! Coatingon ma ejjeles muszakban Anod 1 es Katod 1 megy nalunk, mindd a ket sorra AGV-t hasznalunk! May 25, 2025 at 6:11 PM, Szücs Géza FT-B : köszönöm az infót May 25, 2025 at 6:13 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.0m coater line 1 rw 1 - success(870) coater line 1 rw 2 - success(944) May 25, 2025 at 6:35 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(800) coater line 1 rw 2-success(850) May 25, 2025 at 6:39 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(665) coater line 1 rw 2 - success(695) May 25, 2025 at 6:53 PM, Szarka Adrián : Anod Slitt 1-2 re nem jön az agv May 25, 2025 at 6:53 PM, Szarka Adrián : Megtudjátok nézni miért ? May 25, 2025 at 6:53 PM, Szarka Adrián : Köszi May 25, 2025 at 6:54 PM, Czeilinger Krisztián : Pillanat,nézzük. May 25, 2025 at 6:55 PM, Czeilinger Krisztián : Anod Slitt 1-re megy a 13-as AGV . May 25, 2025 at 6:57 PM, Czeilinger Krisztián : Egyenlőre order nincs rá. May 25, 2025 at 7:03 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(800) coater line 1 rw 2-success(835) May 25, 2025 at 7:07 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(510) coater line 1 rw 2 - success(670) May 25, 2025 at 7:12 PM, Czeilinger Krisztián : Anode Slitt 1-re viszi a 22-es AGV az A33-ból. May 25, 2025 at 7:13 PM, Czeilinger Krisztián : Anode Slitt 1-re viszi a 22-es AGV az A33-ból. May 25, 2025 at 7:35 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(870) coater line 1 rw 2-success(1000) May 25, 2025 at 7:36 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(485) coater line 1 rw 2 - success(793) May 25, 2025 at 8:06 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001m coater line 1 rw 1-success(700) coater line 1 rw 2-success(870) May 25, 2025 at 8:15 PM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(550) coater line 1 rw 2 - success(760) May 25, 2025 at 8:24 PM, Viktoriia Hleba : Press 4 anode - R/W robot stop. Please check May 25, 2025 at 8:26 PM, Rácz Dániel / FA : Jövök May 25, 2025 at 8:26 PM, Viktoriia Hleba : Köszönöm May 25, 2025 at 8:26 PM, Rácz Dániel / FA : E0CNVA51-CV04 06_013 LTA0295 reel tálca megszorult May 25, 2025 at 8:28 PM, Rácz Dániel / FA : @Szücs Géza FT-B AN PRess 4 nél új LOGIN ablak van May 25, 2025 at 8:31 PM, Rácz Dániel / FA : EL GF AN PR #04 UW AGV #17 AGV Retry Count Exceeded May 25, 2025 at 8:31 PM, Rácz Dániel / FA : Kész May 25, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : @VK (mcs) could you check why e1sla020 has a LR but no agv assigned? May 25, 2025 at 8:32 PM, Shakir (MCS) : Checking sir May 25, 2025 at 8:34 PM, Shakir (MCS) : LR received but There is No Material Available Thank you May 25, 2025 at 8:34 PM, MUGDHO/Ivansca FA : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(1296) coater line 1 rw 2-success(1570) May 25, 2025 at 8:35 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(765) coater line 1 rw 2 - success(898) May 25, 2025 at 8:35 PM, Rácz Dániel / FA : Az Iváncsa helység nevet hányféle képpen láttuk leírva helytelenül kb ? 🤓 May 25, 2025 at 8:40 PM, Rácz Dániel / FA : @Kertész Dániel please check it. Thank you 😎 May 25, 2025 at 9:03 PM, Rácz Dániel / FA : EL GF CA CT #1 P02 AGV #2 Position Move Complete Position Abnormal error lots of times Korean supporter need help. please check it. Thank you May 25, 2025 at 9:05 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(1000) coater line 1 rw 2-success(800) May 25, 2025 at 9:07 PM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 지원부탁드립니다. May 25, 2025 at 9:08 PM, Baek Hojong(백호종)FA : 확인 May 25, 2025 at 9:08 PM, KIM SEYEON [김세연]_FA : 우선 라인아웃하고 이명해과장님 오시면 확인하는 방법도 있겧ㄴ습니다. May 25, 2025 at 9:16 PM, Baek Hojong(백호종)FA : 네 확인결과 리트라이 1회 실패 및 재 투입후 성공이었지만 1시간전에도 동일한 증상이라 일단 라인아웃 점검후 재투입하겠습니다 May 25, 2025 at 9:29 PM, 조혜근 : @FA AGV 21 on the corridor side of cathode press No. 3 is not moving. Please check it May 25, 2025 at 9:31 PM, Szarka Adrián : 7 és a 17 agv anod oldalon küldjétek odébb legyszives May 25, 2025 at 9:31 PM, Szarka Adrián : Köszönöm May 25, 2025 at 9:32 PM, Czeilinger Krisztián : Rendben ,megyünk. May 25, 2025 at 9:35 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(manual) coater line 1 rw 2-success(manual) May 25, 2025 at 9:51 PM, Shakir (MCS) : @Fa Please check E0CNVA51_P01 INV 01 run time over error Thank you May 25, 2025 at 9:51 PM, Csanálosi Gábor FA : Omw May 25, 2025 at 10:10 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(856) coater line 1 rw 2 - success(987) May 25, 2025 at 10:21 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(manual) coater line 1 rw 2-success(manual) May 25, 2025 at 10:25 PM, Szücs Géza FT-B : @Szarka Adrián AN slitt fog ma állni takarítás vagy valamilyen okból. May 25, 2025 at 10:25 PM, Szücs Géza FT-B : ? May 25, 2025 at 10:27 PM, Szarka Adrián : Nem nem May 25, 2025 at 10:27 PM, Szarka Adrián : Anod Slitt 1-2 termel May 25, 2025 at 10:27 PM, Szarka Adrián : 15 agv küldjétek odébb kerlek May 25, 2025 at 10:27 PM, Szarka Adrián : Köszönöm May 25, 2025 at 10:28 PM, Szücs Géza FT-B : @Pálosi Róbert légyszives May 25, 2025 at 10:33 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(685) coater line 1 rw 2 - success(743) May 25, 2025 at 10:35 PM, (Unknown) left this chatroom. May 25, 2025 at 10:39 PM, Rácz Dániel / FA : @baganaa May 25, 2025 at 10:56 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(665) coater line 1 rw 2 - success(790) May 25, 2025 at 11:04 PM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. May 25, 2025 at 11:04 PM, Rácz Dániel / FA : Jövök May 25, 2025 at 11:09 PM, Rácz Dániel / FA : Kész May 25, 2025 at 11:15 PM, 방혁 PM(Bang.Hyuk) FA : @MCS Please check E1SLA020_P01 order status May 25, 2025 at 11:16 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(manual) coater line 1 rw 2-success(manual) May 25, 2025 at 11:16 PM, Shakir (MCS) : LR received at 18:04 but there is No search Lot available. Thank you May 25, 2025 at 11:17 PM, 방혁 PM(Bang.Hyuk) FA : Thank you! May 25, 2025 at 11:28 PM, MUGDHO/Ivansca FA : Age 7 is stopped E1PRA010-TR01-MCP#1 May 25, 2025 at 11:29 PM, MUGDHO/Ivansca FA : Please help May 25, 2025 at 11:32 PM, Rácz Dániel / FA : Jövök May 25, 2025 at 11:48 PM, Osman/ "Ivancsa FA" : @ FA Please come to the coating Anode Error : push abnoma 1 error May 25, 2025 at 11:50 PM, Rácz Dániel / FA : This message was deleted. May 25, 2025 at 11:50 PM, Rácz Dániel / FA : No May 25, 2025 at 11:51 PM, Rácz Dániel / FA : Korean support need May 25, 2025 at 11:53 PM, Osman/ "Ivancsa FA" : Solved May 25, 2025 at 11:57 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(795) coater line 1 rw 2 - success(679) May 25, 2025 at 11:58 PM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(manual) coater line 1 rw 2-success(1000) May 25, 2025 at 11:59 PM, Rácz Dániel / FA : Ez megy látom May 26, 2025 at 12:00 AM May 26, 2025 at 12:00 AM, Szücs Géza FT-B : ezt melyik berendezés írja ki? May 26, 2025 at 12:02 AM, Osman/ "Ivancsa FA" : I'm fixing it. It's working now May 26, 2025 at 12:02 AM, Rácz Dániel / FA : Erről beszélek May 26, 2025 at 12:02 AM, Rácz Dániel / FA : De amikor kértem oktatást akkor én voltam a … May 26, 2025 at 12:06 AM, Osman/ "Ivancsa FA" : I have another error coating anode warehouse E0stka34 is not working Error : auto start servo off May 26, 2025 at 12:07 AM, Rácz Dániel / FA : Szerintem kellene még felvenni embert aki itt a kakaoban írogatja nekünk a hibákat May 26, 2025 at 12:13 AM, Osman/ "Ivancsa FA" : Solved May 26, 2025 at 12:22 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(780) coater line 1 rw 2-success(820) May 26, 2025 at 12:37 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(1150) coater line 1 rw 2 - success(1300) May 26, 2025 at 12:53 AM, Osman/ "Ivancsa FA" : This message was deleted. May 26, 2025 at 12:55 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(700) coater line 1 rw 2-success(720) May 26, 2025 at 12:56 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. May 26, 2025 at 12:56 AM, Czeilinger Krisztián : Megyünk. May 26, 2025 at 1:00 AM, Czeilinger Krisztián : Kész May 26, 2025 at 1:02 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(500) coater line 1 rw 2 - success(700) May 26, 2025 at 1:04 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. May 26, 2025 at 1:05 AM, Szappanos Gábor : Coating anód 1 nél letiltott az egyik agv May 26, 2025 at 1:06 AM, Czél Tamás : Sziasztok Katód Slitt 3-nál nem viszi el a konveyor a reelt. Kérlek nézzétek meg Köszönöm May 26, 2025 at 1:07 AM, Osman/ "Ivancsa FA" : Solved May 26, 2025 at 1:08 AM, Csanálosi Gábor FA : C0CNVC51 8126 PORT Data loss @Czeilinger Krisztián May 26, 2025 at 1:17 AM, 방혁 PM(Bang.Hyuk) FA : @MCS can you check available lot for Slit/press? May 26, 2025 at 1:19 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 2820.4m coater line 1 rw 1-success(550) coater line 1 rw 2-success(600) May 26, 2025 at 1:22 AM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(650) coater line 1 rw 2 - success(787) May 26, 2025 at 1:26 AM, Shakir (MCS) : This message was deleted. May 26, 2025 at 1:26 AM, Shakir (MCS) : AN -Line Slit1&2:00 Slitt3:28 CA -Line Slit1 and slitt2: 08 Slitt3: 09 Press: Line AN Press1 &2 : 01 Press4 : 47 CA Press1 &2 : 181 Press4 : 55 Material available in Slitt&press Thank you May 26, 2025 at 1:42 AM, Czél Tamás : Erre jön esetleg valaki? May 26, 2025 at 1:43 AM, Rácz Dániel / FA : Jövünk igen May 26, 2025 at 1:44 AM, 방혁 PM(Bang.Hyuk) FA : 슬리터 담당 제조분 계신가요 May 26, 2025 at 1:48 AM, Rácz Dániel / FA : Kész May 26, 2025 at 1:52 AM, 송태용(Song tae yong) : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(1400) coater line 1 rw 2-success(1370) May 26, 2025 at 2:08 AM, MUGDHO/Ivansca FA : Agv failed to release roll please come E1PRA040-TR04-MCP#1 May 26, 2025 at 2:10 AM, MUGDHO/Ivansca FA : Problem solved May 26, 2025 at 2:16 AM, Rácz Dániel / FA : Thank you May 26, 2025 at 2:18 AM, 송태용(Song tae yong) : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(1000) coater line 1 rw 2-success(700) May 26, 2025 at 2:18 AM, Rácz Dániel / FA : Thank you May 26, 2025 at 2:53 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(800) coater line 1 rw 2-success(840) May 26, 2025 at 2:53 AM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(590) coater line 1 rw 2 - success(765) May 26, 2025 at 3:02 AM, Rácz Dániel / FA : Thank you May 26, 2025 at 3:20 AM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2891.0m coater line 1 rw 1 - success(501) coater line 1 rw 2 - success(601) May 26, 2025 at 3:22 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(800) coater line 1 rw 2-success(700) May 26, 2025 at 3:50 AM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(620) coater line 1 rw 2 - success(663) May 26, 2025 at 3:54 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(700) coater line 1 rw 2-success(760) May 26, 2025 at 4:12 AM, Viktoriia Hleba : anod slitt 2 nincs talca May 26, 2025 at 4:14 AM, Szarka Adrián : Gyertek kerlek köszi May 26, 2025 at 4:14 AM, 송태용(Song tae yong) : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(400) coater line 1 rw 2 - success(620) May 26, 2025 at 4:26 AM, Osman/ "Ivancsa FA" : @FA Please come to the coating cathode site E1CTC010 - TR01-MCP#3 is not working Thank you May 26, 2025 at 4:27 AM, Osman/ "Ivancsa FA" : Solved May 26, 2025 at 4:29 AM, Osman/ "Ivancsa FA" : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1-success(900) coater line 1 rw 2-success(1400) May 26, 2025 at 4:32 AM, Csicskovics Balázs : Cathode press 1 az AGV nem viszi el a kész Roll-t. Gyertek légyszíves. Köszönöm May 26, 2025 at 4:40 AM, Csicskovics Balázs : Javítva May 26, 2025 at 4:40 AM, Rácz Dániel / FA : This message was deleted. May 26, 2025 at 4:40 AM, Rácz Dániel / FA : Köszi May 26, 2025 at 5:03 AM, Osman/ "Ivancsa FA" : @ FA Please can you check Coating cathod AGV 19 Error : rear scanner protection zone May 26, 2025 at 5:08 AM, KIM SEYEON [김세연]_FA : okay May 26, 2025 at 5:18 AM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(544) coater line 1 rw 2 - success(645) May 26, 2025 at 5:45 AM, Osman/ "Ivancsa FA" : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(554) coater line 1 rw 2 - success(680) May 26, 2025 at 5:46 AM, Rácz Dániel / FA : Thank you May 26, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Nagy Zsolt, Kasztel Balázs Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(4): GF: Novák Zoltán, Zsurbej Zsolt 1F: Novák Károly, Kovács Szabolcs, Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs May 26, 2025 at 6:08 AM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt 2 May 26, 2025 at 6:08 AM, Oláh András : Megyünk May 26, 2025 at 6:18 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(826) coater line 1 rw 2 - success(920) May 26, 2025 at 6:34 AM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt 2 May 26, 2025 at 6:44 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1 - success(945) coater line 1 rw 2 - success(630 May 26, 2025 at 6:49 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun Elec Cho Sung Jun May 26, 2025 at 6:53 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (750) coater line 1 rw 2-success(750) May 26, 2025 at 7:16 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2817m coater line 1 rw 1- success (1305) coater line 1 rw 2-success(1069) May 26, 2025 at 7:27 AM, Erik Gerzsenyi : Anod slitt 2 conveyor alvo allapotban van May 26, 2025 at 7:27 AM, Erik Gerzsenyi : Raneztek kerlek?😁 May 26, 2025 at 7:27 AM, Oláh András : Itt allunk 😏 May 26, 2025 at 7:27 AM, Erik Gerzsenyi : Koci May 26, 2025 at 7:30 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1040) coater line 1 rw 2-success(1550) May 26, 2025 at 7:46 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (716) coater line 1 rw 2-success(725) May 26, 2025 at 8:03 AM, waseem/ Iváncsa Fa : @fa technician Plz come fast cathode May 26, 2025 at 8:03 AM, waseem/ Iváncsa Fa : Solve 👍 May 26, 2025 at 8:04 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1040) coater line 1 rw 2-success(1850) May 26, 2025 at 8:27 AM, Hári Zoltàn : Technikus kene a katad 1 2es rw-re! Koszi! May 26, 2025 at 8:28 AM, Szabadi Miki : Megyek May 26, 2025 at 8:30 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (700) coater line 1 rw 2-success(manual due to buffer not working) May 26, 2025 at 8:39 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (1030) coater line 1 rw 2-success(650) May 26, 2025 at 8:52 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (580) coater line 1 rw 2- succes (750) May 26, 2025 at 9:04 AM, FACS_오창훈_CHANGHOON : 코터 양극 AGV 8호기 pos cont 에러 지속으로 방향 전환이 안되어 우선 라인아웃 시켰습니다. 점검 부탁 드립니다. May 26, 2025 at 9:09 AM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (700) coater line 1 rw 2-success(750) May 26, 2025 at 9:21 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (560) coater line 1 rw 2- succes (640) May 26, 2025 at 9:37 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2770m coater line 1 rw 1- success (154, stop) coater line 1 rw 2-success(154, stop) Filter changing May 26, 2025 at 9:58 AM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (680) coater line 1 rw 2- succes (500) May 26, 2025 at 10:15 AM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt 3 May 26, 2025 at 10:16 AM, Oláh András : Megyünk May 26, 2025 at 10:22 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (550) coater line 1 rw 2- succes (730) May 26, 2025 at 10:41 AM, 지찬우 : Cathode press2 L/R Check please May 26, 2025 at 10:42 AM, Sazzad Bhai SKon : Not received May 26, 2025 at 10:43 AM, 지찬우 : I sent a re signal May 26, 2025 at 10:44 AM, Sazzad Bhai SKon : LR received, job initiated May 26, 2025 at 10:46 AM, Saki /Iváncsa Fa : This message was deleted. May 26, 2025 at 10:47 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (765) coater line 1 rw 2- succes (755) May 26, 2025 at 10:53 AM, 김대호 (Kim Dae Ho) : Anode sliter 2 Please check the error @fa May 26, 2025 at 10:59 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1400) coater line 1 rw 2- succes (1300) May 26, 2025 at 11:08 AM, 김대호 (Kim Dae Ho) : Cathode press 2 Please check the L/R @Sazzad Bhai SKon May 26, 2025 at 11:08 AM, Sazzad Bhai SKon : LR received and job created, RBC1450 on the Way May 26, 2025 at 11:09 AM, 김대호 (Kim Dae Ho) : Thank you ! May 26, 2025 at 11:10 AM, Sazzad Bhai SKon : Job created but transfer not initiated. Because of location mismatched error. RBC1450 is in the coating line 1! May 26, 2025 at 11:13 AM, 김대호 (Kim Dae Ho) : So roll isn't coming? Someone's taking action, right? May 26, 2025 at 11:16 AM, Erik Gerzsenyi : Emoticons May 26, 2025 at 11:17 AM, Sazzad Bhai SKon : Could you please press LR again? May 26, 2025 at 11:17 AM, Sazzad Bhai SKon : Crane active, transfer initiated now May 26, 2025 at 11:21 AM, 김대호 (Kim Dae Ho) : 양극 프레스 2호기 롤 반송 지연 46분 발생하였습니다. Cathode press 2 Roll return delay 46 minutes May 26, 2025 at 11:21 AM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (500) coater line 1 rw 2- succes (650) May 26, 2025 at 11:23 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (710) coater line 1 rw 2- succes (840) May 26, 2025 at 11:33 AM, 김대호 (Kim Dae Ho) : 양극 프레스 2호기 롤 반송 지연 26분 발생하였습니다. Cathode press 2 Roll return delay 26 minutes May 26, 2025 at 11:34 AM, 김대호 (Kim Dae Ho) : Cathode press2 Please check the L/R @Sazzad Bhai SKon May 26, 2025 at 11:35 AM, Sazzad Bhai SKon : LR received at 11:34, job received, transfer initiated May 26, 2025 at 11:52 AM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2851m coater line 1 rw 1- success (1280) coater line 1 rw 2- succes (1280) May 26, 2025 at 12:02 PM, 김대호 (Kim Dae Ho) : 음극 슬리팅 2호기 트레이 아이디가 1st, 2nd 동일합니다. @위더스 May 26, 2025 at 12:08 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1100) coater line 1 rw 2- succes (1400) May 26, 2025 at 12:18 PM, MUGDHO/Ivansca FA left this chatroom. May 26, 2025 at 12:18 PM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 2851m coater line 1 rw 1- success (780) coater line 1 rw 2- succes (880) May 26, 2025 at 12:34 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (650) coater line 1 rw 2- succes (830) May 26, 2025 at 12:35 PM, FACS_Wooseok Choi : 아이디 에러와 슬리터 컨베이어 해결했습니다. May 26, 2025 at 12:41 PM, Turianytsia Olesia : A szállítószalag elakadt Anode Slitt 3 May 26, 2025 at 12:42 PM, waseem/ Iváncsa Fa : (result) pv-Anode Length of electrode is 2851m coater line 1 rw 1- success (650) coater line 1 rw 2- succes (630) May 26, 2025 at 12:51 PM, Turianytsia Olesia : A szállítószalag megállt. Anode May 26, 2025 at 12:51 PM, Oláh András : A liftnél van a baj rajta vagyok May 26, 2025 at 12:57 PM, 김대호 (Kim Dae Ho) : 감사합니다 May 26, 2025 at 12:59 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (630) coater line 1 rw 2- success (850) May 26, 2025 at 1:05 PM, Koska Szilárd János : sziasztok anód slitt 3 nál megtudnátok nézni a coveyor szalagot megint megállt May 26, 2025 at 1:06 PM, Dániel Hufnágel : Egy pillanat May 26, 2025 at 1:06 PM, Koska Szilárd János : nemjön be a szalagon a reeltálca May 26, 2025 at 1:13 PM, duzzaman Md (MCS) : @FA Please check EOCNVA51_P01 INV-01 RUN TIME OVER ERROR Thank you! May 26, 2025 at 1:13 PM, Hári Zoltàn : Technikus kene a foliaraktarhoz! Koszi! May 26, 2025 at 1:13 PM, Oláh András : Megyek May 26, 2025 at 1:14 PM, Dániel Hufnágel : Already there May 26, 2025 at 1:29 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (550) coater line 1 rw 2- success (630) May 26, 2025 at 1:37 PM, Erik Gerzsenyi : Katod 4-es rollstorage meghalt May 26, 2025 at 1:37 PM, Oláh András : Isten nyugosztalja May 26, 2025 at 1:37 PM, Erik Gerzsenyi : Ige May 26, 2025 at 1:41 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (690) coater line 1 rw 2- succes (610) May 26, 2025 at 1:41 PM, Yena Valerii : please check if there is material in the anode roll warehouse, for some reason the material for 2 press anode does not arrive May 26, 2025 at 1:44 PM, duzzaman Md (MCS) : There's active job, carrier no RBA2236 . Vehicle is also assigned. However, E0STKA34_P01 is OOS. May 26, 2025 at 1:44 PM, duzzaman Md (MCS) : @FA please check May 26, 2025 at 1:45 PM, Oláh András : We are here May 26, 2025 at 1:45 PM, Yena Valerii : thanks May 26, 2025 at 1:45 PM, Annau András : Sziasztok! @Koncz Tamás @Deepu Divan FA-Eng A későbbiekben ha csináltok teszteket a roll raktárakban, és tároltok be ezáltal üres bobbinokat, akkor legyetek kedvesek kiszedni a teszt végeztével. A mai nap folyamán kb 70db üres bobbint szedtünk ki a raktárakból, és nem igazán van erre kapacitás a műszakokban. Köszönöm. May 26, 2025 at 1:52 PM, duzzaman Md (MCS) : Please also have a look at E0STKC34_M01 its OOS.There are pending jobs. May 26, 2025 at 1:57 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (660) coater line 1 rw 2- success (730) May 26, 2025 at 1:58 PM, Oláh András : Production use it for take out empty bobbins May 26, 2025 at 2:04 PM, Koncz Tamás : Szia, nincs információm hogy csináltunk ilyet, sajnos arról hogy a telepítő cég milyen dolgokat tesztel, végképp nem tudunk...sajnálom May 26, 2025 at 2:10 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (1070) coater line 1 rw 2- succes (770) May 26, 2025 at 2:19 PM, FACS_오창훈_CHANGHOON : It's Autostep err We solved May 26, 2025 at 2:32 PM, Turianytsia Olesia : A szállítószalag elakadt Anode Slitt 3 May 26, 2025 at 2:35 PM, FACS_Bareum kim : Anode slitter 3Line?? May 26, 2025 at 2:37 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1050) coater line 1 rw 2- succes (750) May 26, 2025 at 2:39 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (789) coater line 1 rw 2- succes (825) May 26, 2025 at 3:01 PM, duzzaman Md (MCS) : @FA Is some majntainace ongoing at CNVA51 ? May 26, 2025 at 3:02 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (1150) coater line 1 rw 2- succes (850) May 26, 2025 at 3:02 PM, Dániel Hufnágel : Yes we are there May 26, 2025 at 3:04 PM, Somoskövy Martin : Sziasztok. Anode Slitt 1-en az 1-es R/W elvesztette a tálca adatokat. Megnéznétek? Köszönöm. May 26, 2025 at 3:07 PM, Dániel Hufnágel : Részünkről minden adatt latszik és megfelelő May 26, 2025 at 3:09 PM, Somoskövy Martin : Nálunk az eq-hoz való tálcaszám üres és így nem engedi az elküldést. May 26, 2025 at 3:10 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2901m coater line 1 rw 1- success (780) coater line 1 rw 2- succes (840) May 26, 2025 at 3:33 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (950) coater line 1 rw 2- succes (800) May 26, 2025 at 3:41 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 3028m coater line 1 rw 1- success (1200) coater line 1 rw 2- succes (1113) May 26, 2025 at 3:59 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (850) coater line 1 rw 2- succes (700) May 26, 2025 at 4:33 PM, waseem/ Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (650) coater line 1 rw 2- succes (800) May 26, 2025 at 4:43 PM, Saki /Iváncsa Fa : This message was deleted. May 26, 2025 at 4:44 PM, Saki /Iváncsa Fa : (result) pv-Anode Length of electrode is 2855m coater line 1 rw 1- success (1731) coater line 1 rw 2- succes (1441) May 26, 2025 at 5:02 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (490) coater line 1 rw 2- succes (768) May 26, 2025 at 5:31 PM, Saki /Iváncsa Fa : (result) pv-Cathode Length of electrode is 3001.8m coater line 1 rw 1- success (490) coater line 1 rw 2- succes (850) May 26, 2025 at 5:56 PM, Pintér Gábor : Sziasztok katód 1 2nd R/W-ról maunálisan vettük le a Jumbot kérhetnék ide egy FA technikust hogy megnézze a hiba eredetét köszönöm May 26, 2025 at 5:57 PM, Viczai Tamás : Megyünk May 26, 2025 at 6:05 PM, (Unknown) : Today May 26 @(Unknown) and @Nauman May 26, 2025 at 6:20 PM, Baek Hojong(백호종)FA : Night shift FA Date: 2025.05.26 Time:18:00~06:00 Baek Hojong 백호종PM 1. Elec 송태용 (Song Taeyong) 2. Assy 1F 김종원 (Kim Jongwon) GF 오은향 (OH Eunhyang) May 26, 2025 at 6:34 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (563 coater line 1 rw 2-success (672 May 26, 2025 at 6:35 PM, Mr Park 박민성 invited Nauman/Ivancsa FA. May 26, 2025 at 7:05 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (624 coater line 1 rw 2-success (762 May 26, 2025 at 7:31 PM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (704 coater line 1 rw 2-success (606 May 26, 2025 at 8:03 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (730 coater line 1 rw 2-success (731 May 26, 2025 at 8:38 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (628 coater line 1 rw 2-success (918 May 26, 2025 at 8:57 PM, na1tis : Hello. Help me! Cathode Press 1, R/W does not work, the robot does not pick up material May 26, 2025 at 8:57 PM, na1tis : Thank you May 26, 2025 at 8:58 PM, Viczai Tamás : Megyünk May 26, 2025 at 9:02 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (716 coater line 1 rw 2-success (736 May 26, 2025 at 9:33 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (526 coater line 1 rw 2-success (702 May 26, 2025 at 9:44 PM, Czél Tamás : Sziasztok Katód Press 2-re fél órája várjuk az anyagot. Kérlek nézzétek meg hogy miért nem jön. Köszönöm May 26, 2025 at 9:49 PM, Baek Hojong(백호종)FA : @Shakir (MCS) Sziasztok Katód Press 2-re fél órája várjuk az anyagot. Kérlek nézzétek meg hogy miért nem jön. Köszönöm May 26, 2025 at 9:49 PM, Shakir (MCS) : Checking sir May 26, 2025 at 9:59 PM, Shakir (MCS) : There is No existing Job for press2, Last carrier RBC1452 assigned for press2 but job was not successful because the carrier RBC1452 current location showing on E1CTC010__P02. Please Press LR again. Thank you May 26, 2025 at 10:04 PM, 조혜근 : 양극 프레스 2호기 LR 다시 누르면 되나요? May 26, 2025 at 10:04 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (726 coater line 1 rw 2-success (698 May 26, 2025 at 10:05 PM, 조혜근 : I pressed the LR of the cathode press unit 2 again. Please check if there is a signal May 26, 2025 at 10:07 PM, Shakir (MCS) : LR received, again the carrier RBC1452 assigned but the Location of carrier RBC1452 is different. MCS at E1CTC010_P02 and RTD at E0STKC33(0100104). May 26, 2025 at 10:12 PM, Shakir (MCS) : @FA Need confirmation the location of RBC1452, After that I will update the location. Thank you May 26, 2025 at 10:12 PM, 조혜근 : I will move RBC1452 to Unit 2 and check it at the manual port of Unit 2 May 26, 2025 at 10:14 PM, Shakir (MCS) : Press LR again for Press2 May 26, 2025 at 10:15 PM, 조혜근 : Since the buffer is on, LR must be automatically entered to normal May 26, 2025 at 10:17 PM, 조혜근 : I took out RBC1452 as a manual port and checked it, and the matching matches the actual LOT ID May 26, 2025 at 10:18 PM, 조혜근 : Please check why it didn't work May 26, 2025 at 10:19 PM, Shakir (MCS) : Last LR received at 22:05 There is no current LR May 26, 2025 at 10:20 PM, Shakir (MCS) : Please send it back to STK May 26, 2025 at 10:21 PM, 조혜근 : I proceeded LR again 3 minutes ago, is there no signal? May 26, 2025 at 10:22 PM, Shakir (MCS) : There is No LR May 26, 2025 at 10:22 PM, 조혜근 : I'll cancel it and try again May 26, 2025 at 10:23 PM, 조혜근 : I just tried again. Please check it out May 26, 2025 at 10:25 PM, Shakir (MCS) : LR received, Carrier on the way AGV01 assigned May 26, 2025 at 10:27 PM, Shakir (MCS) : It happened because of the location of carrier mismatch in MCS and RTD. Now RBC1452 on the way to press 2 May 26, 2025 at 10:28 PM, 김대호 (Kim Dae Ho) : 양극프레스 2흐기 Agv 지연시간 확인해서 공유부탁드립니다. @조혜근 May 26, 2025 at 10:29 PM, 김대호 (Kim Dae Ho) : . May 26, 2025 at 10:32 PM, 조혜근 : Can you investigate why it's inconsistent? May 26, 2025 at 10:33 PM, Shakir (MCS) : Checking May 26, 2025 at 10:33 PM, 조혜근 : Thank you May 26, 2025 at 10:36 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (665 coater line 1 rw 2-success (768 May 26, 2025 at 10:40 PM, 조혜근 : 양극 프레스 2호기 UW AGV 대기 시간 약 2시간 20분 소요, 비가동 발생 Cathode Press No. 2 UW AGV waiting time approximately 2 hours and 20 minutes May 26, 2025 at 10:44 PM, 김대호 (Kim Dae Ho) : 최근 설비 버퍼가 비어있으나, L/R 신호 없는 현상이 있습니다. 금일 양극 프레스 2호기만 3건 이상 발생중입니다. @김건희 @Baek Hojong(백호종)FA May 26, 2025 at 10:45 PM, KIM SEYEON [김세연]_FA : @김건희 @김대호 (Kim Dae Ho) 원인 확인하여 공유드리겠습니다. May 26, 2025 at 10:46 PM, Baek Hojong(백호종)FA : 상기 현상 명일 주간 확인 및 점검 요청 드렸습니다 원인 분석후 결과 공유드릴예정입니다 조장님 May 26, 2025 at 10:52 PM, 김대호 (Kim Dae Ho) : 넵 알겠습니다. 감사합니다. 롤 없을시 지속 확인 부탁드립니다. @조혜근 May 26, 2025 at 10:57 PM, 조혜근 : 네 알겠습니다! May 26, 2025 at 10:59 PM, Shakir (MCS) : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA From 19:33, the location of carrier RBC1452 appeared differently in MCS E1CTC010_P02 and RTD E0STKC33 / 0100104 LR was received at 19:33 and the carrier was assigned RBC1452, but due to the location mismatch between MCS and RTD, the job could not be completed successfully. The same issue occurred again at 19:57, with the same carrier being assigned. This happened a total of four times at 19:33, 19:57, 20:00, and 22:04. Once the carrier was moved to t May 26, 2025 at 11:01 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (662 coater line 1 rw 2-success (676 May 26, 2025 at 11:02 PM, Baek Hojong(백호종)FA : Thanks. Shakir! I understand! May 26, 2025 at 11:02 PM, KIM SEYEON [김세연]_FA : still need more investigation why rbd1452 appeared differently on mcs and rtd. May 26, 2025 at 11:02 PM, Shakir (MCS) : You’re welcome sir May 26, 2025 at 11:02 PM, KIM SEYEON [김세연]_FA : will check with rtdmcs member tomorrow. May 26, 2025 at 11:02 PM, KIM SEYEON [김세연]_FA : please check now press slitter LR is okay. May 26, 2025 at 11:03 PM, Shakir (MCS) : Checking sir May 26, 2025 at 11:04 PM, Shakir (MCS) : Now Job order for press2 is running smoothly. Thank you May 26, 2025 at 11:13 PM, Shakir (MCS) : For Slitt3 CA last LR received at 17:05 job completed at 17:22. After that there is no LR. Thank you May 26, 2025 at 11:22 PM, KIM SEYEON [김세연]_FA : thanks May 26, 2025 at 11:23 PM, 조혜근 : Yes, that's right. CA Slitter Unit 3 is not produced at night May 26, 2025 at 11:23 PM, Shakir (MCS) : Well noted Thank you May 26, 2025 at 11:24 PM, 조혜근 : The empty tray of the anode slitter unit 2 is coming late, so please check it May 26, 2025 at 11:27 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_013/14 run time error. Thank yiu May 26, 2025 at 11:29 PM, Shakir (MCS) : I have increased the priority for empty reel tray. Also the releasing some trays from STKA51. Thank you May 26, 2025 at 11:29 PM, Viczai Tamás : Done May 26, 2025 at 11:31 PM, Shakir (MCS) : Now unit 2 slitt occupied with tray May 26, 2025 at 11:34 PM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (670 coater line 1 rw 2-success (740 May 27, 2025 at 12:09 AM May 27, 2025 at 12:09 AM, Nauman/Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (861 coater line 1 rw 2-success (822 May 27, 2025 at 12:27 AM, Nauman/Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (826 coater line 1 rw 2-success (756 May 27, 2025 at 12:38 AM, 오승주 : 양극 1라인 2nd 리와인더 AGV 문제 발생했습니다 확인 부탁드립니다. May 27, 2025 at 12:40 AM, Baek Hojong(백호종)FA : 확인 May 27, 2025 at 12:41 AM, Nauman/Ivancsa FA : result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (826 coater line 1 rw 2-success (756 May 27, 2025 at 1:07 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (666 coater line 1 rw 2-success (892 May 27, 2025 at 1:44 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (814 coater line 1 rw 2-success (947 May 27, 2025 at 2:33 AM, Nauman/Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(710 coater line 1 rw 2-success(820 May 27, 2025 at 2:34 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (711 coater line 1 rw 2-success (642 May 27, 2025 at 2:34 AM, Nauman/Ivancsa FA : Anod May 27, 2025 at 3:01 AM, Nauman/Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(707 coater line 1 rw 2-success(1058 May 27, 2025 at 3:14 AM, (Unknown) : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (932 coater line 1 rw 2-success (927 May 27, 2025 at 3:25 AM, 조혜근 : The empty tray of anode slitter units 2 and 3 is not coming. Please check it May 27, 2025 at 3:29 AM, 조혜근 : Anode Slitter Unit 1 will soon run out of trays May 27, 2025 at 3:29 AM, Shakir (MCS) : STK is busy , I increased the priority and also I am releasing the empty Tray from STK51. May 27, 2025 at 3:36 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (747 coater line 1 rw 2-success (745 May 27, 2025 at 3:37 AM, 조혜근 : There are no trays in anode slitter units 1, 2, and 3, so we need a lot of empty trays May 27, 2025 at 3:38 AM, Shakir (MCS) : 6 trays on the way, I am working on it May 27, 2025 at 3:39 AM, 조혜근 : It's not enough, please send me more May 27, 2025 at 3:39 AM, 조혜근 : There are only six reels waiting right now May 27, 2025 at 3:39 AM, Shakir (MCS) : Working on it May 27, 2025 at 4:02 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (670 coater line 1 rw 2-success (623 May 27, 2025 at 4:02 AM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(650 coater line 1 rw 2-success(785 May 27, 2025 at 4:09 AM, Shakir (MCS) : Now CNV full with empty trays Thank you May 27, 2025 at 4:22 AM, 조혜근 : Thank you👍 May 27, 2025 at 4:30 AM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success (556 coater line 1 rw 2-success(538 May 27, 2025 at 4:40 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (1305 coater line 1 rw 2-success (1187 May 27, 2025 at 5:02 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (959 coater line 1 rw 2-success (950 May 27, 2025 at 5:26 AM, (Unknown) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(700 coater line 1 rw 2-success(550 May 27, 2025 at 5:30 AM, Nauman/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (667 coater line 1 rw 2-success (793 May 27, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+2 overtime Overtime (2): Böröcz Tamás, Cehman Zsolt Sick (0):- Holiday (4): Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt, Martina Dávid Shift change(0): Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Cehman Zsolt Assembly(4): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Böröcz Tamás Modul(2): Nagy Gábor, Magyar Balázs May 27, 2025 at 6:10 AM, 김대호 (Kim Dae Ho) : Anode press 4 Please check the alarm. May 27, 2025 at 6:11 AM, Yena Valerii : pls come to anode press 4 May 27, 2025 at 6:20 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (712) coater line 1 rw 2-success (588) May 27, 2025 at 6:33 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (675) coater line 1 rw 2-success (565) May 27, 2025 at 6:34 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun Elec Cho Sung Jun May 27, 2025 at 6:56 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (745) coater line 1 rw 2-success (695) May 27, 2025 at 7:05 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (645) coater line 1 rw 2-success (511) May 27, 2025 at 7:19 AM, 김대호 (Kim Dae Ho) : Is there an Anode slitet 1,2 L/R signal? May 27, 2025 at 7:21 AM, duzzaman Md (MCS) : There is LR but no search lot May 27, 2025 at 7:21 AM, 김대호 (Kim Dae Ho) : Ok ! May 27, 2025 at 7:22 AM, duzzaman Md (MCS) : For AN SL 1, material is on AGV 25. For SL 2 no Lot May 27, 2025 at 7:23 AM, 김대호 (Kim Dae Ho) : Thank you May 27, 2025 at 7:24 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (750) coater line 1 rw 2-success (752) May 27, 2025 at 7:37 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (719) coater line 1 rw 2-success (647) May 27, 2025 at 7:58 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (743) coater line 1 rw 2-success (582) May 27, 2025 at 8:13 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (786) coater line 1 rw 2-success (580) May 27, 2025 at 8:22 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (722) coater line 1 rw 2-success (576) May 27, 2025 at 8:27 AM, Somoskövy Martin : Sziasztok. Cathode Slitt 2-őn a 2-es R/W-en ismeretlen tálcaszám van. Megnéznétek? Köszönöm. May 27, 2025 at 8:30 AM, duzzaman Md (MCS) : @FA Please check AN reel warehouses A51, crane 01 “Port interface error” Thank you May 27, 2025 at 8:37 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (712) coater line 1 rw 2-success (612) May 27, 2025 at 8:53 AM, duzzaman Md (MCS) : @Oláh András Please check E0CNVC51_08_052/053 INV 01 RUNTIME OVER ERROR Thanks May 27, 2025 at 8:56 AM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(1498) coater line 1 rw 2-success(992) May 27, 2025 at 9:06 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (608) coater line 1 rw 2-success (586) May 27, 2025 at 9:22 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (979) coater line 1 rw 2-success (940) May 27, 2025 at 9:35 AM, Atif/Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (584) coater line 1 rw 2-success (595) May 27, 2025 at 9:50 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (870) coater line 1 rw 2-success (857) May 27, 2025 at 9:51 AM, Koska Szilárd János : sziasztok anód rollraktárban kiállt az AGV hibára megnéznétek köszönöm May 27, 2025 at 9:51 AM, Kiss Balázs F.A. : Megyek! May 27, 2025 at 9:56 AM, duzzaman Md (MCS) : @FA Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you! May 27, 2025 at 10:01 AM, Kiss Balázs F.A. : Solved May 27, 2025 at 10:05 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (648) coater line 1 rw 2-success (511) May 27, 2025 at 10:23 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (826) coater line 1 rw 2-success (874) May 27, 2025 at 10:51 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (149.4) coater line 1 rw 2-success (149.4) May 27, 2025 at 10:55 AM, Atif/Ivancsa FA : This message was deleted. May 27, 2025 at 10:55 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (1378) coater line 1 rw 2-success (1072) May 27, 2025 at 11:21 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (875) coater line 1 rw 2-success (995) May 27, 2025 at 11:35 AM, Semenszki Péter : Sziasztok! A fólia raktárt újra tudnátok indítani? May 27, 2025 at 11:43 AM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (545) coater line 1 rw 2-success (634) May 27, 2025 at 11:51 AM, Semenszki Péter : Köszi szépen May 27, 2025 at 11:53 AM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (745) coater line 1 rw 2-success (1090) May 27, 2025 at 12:14 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (546) coater line 1 rw 2-success (551) May 27, 2025 at 12:17 PM, Atif/Ivancsa FA : result) pv-Anode Length of electrode is 2891m coater line 1 rw 1- success (782) coater line 1 rw 2-success (755) May 27, 2025 at 12:45 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (1005) coater line 1 rw 2-success (630) May 27, 2025 at 1:13 PM, 지찬우 : No materials to send to Anode press 4? May 27, 2025 at 1:14 PM, Oláh András : No avaiable material ffor anode press 4 May 27, 2025 at 1:15 PM, duzzaman Md (MCS) : Yes, no search lot May 27, 2025 at 1:15 PM, 지찬우 : MES has 8 jumbo rolls, can't use them? May 27, 2025 at 1:17 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (528) coater line 1 rw 2-success (757) May 27, 2025 at 1:21 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(975) coater line 1 rw 2-success(1238) May 27, 2025 at 1:21 PM, 지찬우 : Check please.. May 27, 2025 at 1:24 PM, Oláh András : RTD has other filters than MES May 27, 2025 at 1:30 PM, 지찬우 : Is there no way? May 27, 2025 at 1:31 PM, Oláh András : We cant modify these filters. May 27, 2025 at 1:37 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_052/053 INV 01 RUNTIME OVER ERROR Thanks May 27, 2025 at 1:38 PM, Oláh András : Checking May 27, 2025 at 1:41 PM, Oláh András : Solved May 27, 2025 at 1:43 PM, Faisal / Ivancsa FA : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(890) coater line 1 rw 2-success(1198) May 27, 2025 at 1:56 PM, Faisal / Ivancsa FA : (result) pv-Cathode Length of electrode is 2991m coater line 1 rw 1- success (695) coater line 1 rw 2-success (1188) May 27, 2025 at 2:35 PM, 김건희 : 작일 발생하였던 버퍼 L/R신호 사라진거 혹시 확인 되셨을까요? May 27, 2025 at 3:05 PM, Koska Szilárd János : anód press 2 nél R/W nél agv kiált hibára ránéznétek? May 27, 2025 at 3:06 PM, KIM SEYEON [김세연]_FA : 현상은 확인되었고 해결방법을 확인중입니다. May 27, 2025 at 3:07 PM, Sazzad Bhai SKon : Press AGV vehicle 19 has alarm: ACS emergency May 27, 2025 at 3:08 PM, Koska Szilárd János : megoldodott azért köszönöm May 27, 2025 at 5:51 PM, FACS_오창훈_CHANGHOON : @mcs Please delete E0CTC010_P03 CARRIR RBC2438 and write data to AGV #2 May 27, 2025 at 5:54 PM, FACS_오창훈_CHANGHOON : E0JGVC01_VC02 need data and destination as it is manually output May 27, 2025 at 5:56 PM, VK (mcs) : Checking May 27, 2025 at 6:03 PM, FACS_오창훈_CHANGHOON : It's ID RBC2438 May 27, 2025 at 6:03 PM, VK (mcs) : Carrier transferred to STK C33 May 27, 2025 at 6:04 PM, FACS_오창훈_CHANGHOON : Thanks May 27, 2025 at 6:05 PM, VK (mcs) : I can not modify carrier info in ACS. Carrier location updated in MCS and carrier as UNK ID . Transferred to STKC33 May 27, 2025 at 6:09 PM, Tumee invited Chinges Fa. May 27, 2025 at 6:10 PM, Mr Park 박민성 invited MUGDHO/Ivansca FA. May 27, 2025 at 6:53 PM, 조혜근 : There is no anode slitter unit 2 and 3 vintray. Please check it out May 27, 2025 at 6:53 PM, 조혜근 : empty tray May 27, 2025 at 6:54 PM, VK (mcs) : Working on it. May 27, 2025 at 6:59 PM, 송태용(Song tae yong) : (result) pv-Anode Length of electrode is 2891m coater line 1 rw 1-success(640) coater line 1 rw 2-success(670) May 27, 2025 at 7:31 PM, MUGDHO/Ivansca FA : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1-success(973) coater line 1 rw 2-success(543) May 27, 2025 at 7:57 PM, Chinges Fa : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1-success(670) coater line 1 rw 2-success(505) May 27, 2025 at 8:20 PM, MUGDHO/Ivansca FA : (result) pv-cathode Length of electrode is 2991.0m coater line 1 rw 1-success(603) coater line 1 rw 2-success(587) May 27, 2025 at 8:25 PM, 송태용(Song tae yong) : (result) pv-Anode Length of electrode is 2901.8m coater line 1 rw 1-success(550) coater line 1 rw 2-success(480) May 27, 2025 at 8:50 PM, Simon Attila F. A. : Elektróda anód agv12-t kikapcsoltuk, mert a hátsó szenzor nem érzékel és a hibát nem tudjuk törölni. May 27, 2025 at 8:52 PM, MUGDHO/Ivansca FA : (result) pv-cathode Length of electrode is 2991.0m coater line 1 rw 1-success(816) coater line 1 rw 2-success(598) May 27, 2025 at 8:56 PM, Chinges Fa : (result) pv-Anode Length of electrode is 2901.7m coater line 1 rw 1-success(757) coater line 1 rw 2-success(769) May 27, 2025 at 9:23 PM, 조혜근 : The roll is not coming to the UW of the cathode press unit 3, so please check it May 27, 2025 at 9:25 PM, VK (mcs) : There is no available material for E1PRC030_P01 May 27, 2025 at 9:26 PM, 조혜근 : Please check RBC0294, RBC0290, RBC2453, and RBC2182 May 27, 2025 at 9:27 PM, 조혜근 : These are in the warehouse, but why aren't they coming? May 27, 2025 at 9:27 PM, VK (mcs) : Checking May 27, 2025 at 9:32 PM, VK (mcs) : Carriers location in MCS are N/A. May 27, 2025 at 9:36 PM, 조혜근 : Okay, thank you for the confirmation May 27, 2025 at 9:48 PM, 조혜근 : I manually took out the RBC0284 and put it back in the warehouse. Please check if the information has changed normally May 27, 2025 at 9:59 PM, VK (mcs) : I checked it but still it’s not in available list. May 27, 2025 at 10:04 PM, 조혜근 : OK, thank you May 28, 2025 at 3:46 AM May 28, 2025 at 3:46 AM, Oláh Rajmund : Légyszives nézzétek meg hogy miért nem viszi el a conveyor a reeleket Koszonom May 28, 2025 at 3:47 AM, Skwarek Tibor : Nézzük May 28, 2025 at 3:47 AM, Viczai Tamás : Már mennek is! May 28, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 28, 2025 at 7:28 AM, Mohammad Amir : This message was deleted. May 28, 2025 at 7:29 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Good morning , Please check LTA1188 located at E0CNVA51_06_034 is not moving and blocking empty Anode trays delivery to Slitter. Thank you very much! May 28, 2025 at 7:29 AM, Mr.Miti (미티) FA : Good morning! Checking! May 28, 2025 at 7:38 AM, Mr.Miti (미티) FA : Solved May 28, 2025 at 7:38 AM, Mohammad Amir : Köszönom szepen! May 28, 2025 at 7:45 AM, Mr.Miti (미티) FA : Me too! May 28, 2025 at 7:57 AM, Mohammad Amir : @cehmannzsoltcehmann @FA Please check E0STKA52_C01/C02 these cranes are inactive without error and there is shortages of Anode Slitter trays. Please check this issue on priority, production will be affected. Thank you very much! May 28, 2025 at 7:58 AM, Mr.Miti (미티) FA : Checking! May 28, 2025 at 7:58 AM, Mohammad Amir : I am realising some trays from STKA51 so that production can continue. Thank you very much! May 28, 2025 at 8:02 AM, Mr.Miti (미티) FA : Solved! May 28, 2025 at 8:02 AM, Mr.Miti (미티) FA : Thank you! May 28, 2025 at 8:05 AM, Mohammad Amir : You are welcome! May 28, 2025 at 9:32 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKA51_P03 it is OOS and because of this reels recovery has been stopped. Thank you very much! May 28, 2025 at 9:39 AM, Erik Gerzsenyi : P01-es portra lett kikerve egy roll May 28, 2025 at 9:40 AM, Mohammad Amir : Yes but port is still OOS that's why rolls not going to Warehouse. Thank you! May 28, 2025 at 9:46 AM, Karina Lyzanets : Sziasztok! Anód oldalon megállt conveyor pálya May 28, 2025 at 9:46 AM, Karina Lyzanets : Megnézzetek légyszíves? May 28, 2025 at 9:46 AM, Karina Lyzanets : Köszönöm May 28, 2025 at 9:46 AM, Mr.Miti (미티) FA : Persze nézem May 28, 2025 at 9:51 AM, Szeitz Flórián : Anód press 7 UW robot kiállt hibára. Gyertek légyszives köszönöm May 28, 2025 at 9:57 AM, Mohammad Amir : Please check this issue there is long queue of materials on CNVA51. Thank you very much! May 28, 2025 at 9:58 AM, Mr.Miti (미티) FA : On my way May 28, 2025 at 10:03 AM, Mr.Miti (미티) FA : Solved May 28, 2025 at 10:03 AM, Mr.Miti (미티) FA : Solved May 28, 2025 at 10:05 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 10:08 AM, Mr.Miti (미티) FA : You’re welcome! May 28, 2025 at 10:43 AM, Karina Lyzanets : Same problem May 28, 2025 at 10:44 AM, Karina Lyzanets : Convejor megállt az anode oldalon May 28, 2025 at 10:44 AM, Karina Lyzanets : Köszönöm szépen May 28, 2025 at 10:46 AM, Mr.Miti (미티) FA : Nézem May 28, 2025 at 10:50 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKC34_C01 there is Light curtain Detected Error(SCS). Thank you very much! May 28, 2025 at 10:53 AM, Mr.Miti (미티) FA : Checking May 28, 2025 at 10:55 AM, Mohammad Amir : @FA Please also check E0STKC32_C01 there is Hoist Exact Position Error after Forking. Thank you very much! May 28, 2025 at 10:56 AM, Mr.Miti (미티) FA : Okay! May 28, 2025 at 10:57 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 10:57 AM, Mr.Miti (미티) FA : Moving May 28, 2025 at 11:00 AM, Mr.Miti (미티) FA : Solved May 28, 2025 at 11:00 AM, Mr.Miti (미티) FA : Solved May 28, 2025 at 11:01 AM, Mohammad Amir : Thank you very much! May 28, 2025 at 11:01 AM, Mr.Miti (미티) FA : You’re welcome! May 28, 2025 at 11:15 AM, Vörös Geri : Anód slitt feltorlodtak a rellek lassan viszi a tàlcákat.megnéznétek?köszi May 28, 2025 at 11:46 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKA52 _P02/P02_OP01 there is Data mismatch error and it has blocked the empty trays delivery. Thank you! May 28, 2025 at 11:48 AM, Mr.Miti (미티) FA : Checking May 28, 2025 at 11:56 AM, 김대호 (Kim Dae Ho) : 음극 프레스 7호기 이재기 에러 발생중입니다. X-Axis position 에러 확인부탁드립니다. An error has occurred in the Anode press No. 7 transfer machine. Please check the X-Axis position error. @Fa, 위더스 May 28, 2025 at 12:02 PM, Mohammad Amir : @Mr.Miti (미티) FA These ports are still empty and there will be shortages of empty trays. Please check the issue on priority. Thank you very much! May 28, 2025 at 12:08 PM, Mr.Miti (미티) FA : @gutenkunstabelzoltan nézd meg légyszíves kijöttem szünetre May 28, 2025 at 12:10 PM, 김주연 : @FA E0STKA52_P02 (GF EMPTY TRAY OUTOUT PORT) os manual. May 28, 2025 at 12:10 PM, gutenkunstabelzoltan : Nem igazan ertem a problemat de nezem May 28, 2025 at 12:16 PM, 김주연 : 포트 ACCESS MODE Manual 상태잊니다 확인부탁드맂니다. May 28, 2025 at 12:46 PM, Vászon Márton : Katód slitt 2, leszedőrobot nem veszi le a reelt légyszives nézzen rá valaki May 28, 2025 at 12:56 PM, gutenkunstabelzoltan : Elvileg most jo May 28, 2025 at 1:10 PM, Mohammad Amir : @cehmannzsoltcehmann @FA Please check E0STKA52_C01/C02 these cranes are inactive without error and there is shortages of Anode Slitter trays. Please check this issue on priority, production will be affected. Thank you very much! May 28, 2025 at 1:21 PM, 지찬우 : anode slitt 3 tray is not coming, please take action May 28, 2025 at 1:22 PM, Mohammad Amir : @FA Please Take action on this,empty trays delivery has stopped. Thank you very much! May 28, 2025 at 1:23 PM, Mohammad Amir : STKA52 is in inactive state that's why you witnessed delay I already informed FA team. I am releasing some trays from STKA51 manually so that production can continue. Thank you very much! May 28, 2025 at 1:37 PM, cehmannzsoltcehmann : Gain active the E0STKA52 May 28, 2025 at 1:38 PM, Mohammad Amir : Thank you very much! May 28, 2025 at 2:35 PM, Mohammad Amir : For your information:- Now CNVA51 is filled with the empty trays ✅ Now I will not Create manual command from STKA51 ,I am monitoring if needed I will send more empty trays. Thank you very much! May 28, 2025 at 2:36 PM, Mohammad Amir : @FA @cehmannzsoltcehmann Please check E0STK002_C01 there is Travel Driver error. Thank you very much! May 28, 2025 at 2:43 PM, 지찬우 : Thank you May 28, 2025 at 2:44 PM, Mohammad Amir : You are welcome! May 28, 2025 at 2:47 PM, Vörös Geri : Katód press 1 elött a raktár bejáratánál a 13-as AGV elvesztette a pozíciót. May 28, 2025 at 3:13 PM, Faisal / Ivancsa FA : This message was deleted. May 28, 2025 at 3:36 PM, Majláth Martin : Sziasztok! Press anoode mehet az agv?? May 28, 2025 at 3:37 PM, Mr.Miti (미티) FA : 7? May 28, 2025 at 3:38 PM, Mohammad Amir : This message was deleted. May 28, 2025 at 3:39 PM, Mohammad Amir : For Anode Press -7, Roll RBA1798 on the way ✅. Thank you! May 28, 2025 at 3:45 PM, 조성준/samkoo/공정-FA : Come to Cotter with your colleagues. @Mohammad Amir May 28, 2025 at 3:46 PM, Mohammad Amir : Could you please explain me what is the issue. Thank you very much! May 28, 2025 at 3:47 PM, 조성준/samkoo/공정-FA : cleaning May 28, 2025 at 3:48 PM, 김건희 : @KIM SEYEON [김세연]_FA 백호종 PM님께서 요청하셨던거 였는데 김대호 조장님 조근 출근이 명일까지 입니다 조장님께서는 아직 일정에 대해 연락 온거는 없다고 하시는데 일정 확인 요청드립니다 May 28, 2025 at 3:48 PM, Mohammad Amir : I am sorry to inform you that it is not our responsibility. Please contact the appropriate team. Thank you very much for your understanding. May 28, 2025 at 3:49 PM, 김지광 left this chatroom. May 28, 2025 at 3:53 PM, 조성준/samkoo/공정-FA : I'm sorry I sent the wrong one! May 28, 2025 at 3:54 PM, Mohammad Amir : It is okay ,now worries. Have a beautiful day ahead. Thank you very much! May 28, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.28. "B" műszak, 8+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Böröczki Balázs, Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián, --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin ------------- May 28, 2025 at 6:33 PM, Viktor Vadas : Sziasztok! Coatingon Anod 1-en mindket rewinderen AGV-t hasznalunk az ejjel Katod 1-en csak az 1-es rewinderen fogjuk hasznalni 2-es rewindert manualisan hasznaljuk May 28, 2025 at 6:33 PM, Szücs Géza FT-B : köszönöm szépen az infót! May 28, 2025 at 6:47 PM, Viktoriia Hleba : 2 slitter anode nincs Agv - 15 perc . May 28, 2025 at 6:56 PM, Czeilinger Krisztián : Az orderben még nincs jelen. May 28, 2025 at 6:56 PM, Szücs Géza FT-B : @mcs please May 28, 2025 at 7:00 PM, VK (mcs) : There is no material available May 28, 2025 at 7:34 PM, Nagy Dávid 4 : Anod press 7 R/W robot probléma help help köszönöm szépen May 28, 2025 at 7:37 PM, Czeilinger Krisztián : Megyek. May 28, 2025 at 7:45 PM, Csanálosi Gábor FA : @VK (mcs) help me pls could you tell me what the carrier id for EC1P073F52K16 ? May 28, 2025 at 7:46 PM, 박정근(Park) : 안녕하세요 금일야간 FA 대응해주시는 한국인분 계시나여...?? May 28, 2025 at 7:47 PM, VK (mcs) : It is RBC2691 May 28, 2025 at 7:51 PM, Viktor Vadas : Sziasztok! Katod 1re szeretnenk erositest kerni, a 2-es rewinderen el lett inditva az AGV viszont nem hasznaltuk volna a nappalos muszakban levo hibak miatt. May 28, 2025 at 8:03 PM, Csanálosi Gábor FA : Thank you, modified the info on the agv. Can you send back to stocker please? May 28, 2025 at 8:05 PM, VK (mcs) : Sure , working on it May 28, 2025 at 8:05 PM, Csanálosi Gábor FA : Wait i think ive done it May 28, 2025 at 8:06 PM, 류종석(RyuJongSeok) : 코팅 양극 1라인 2번 리와인더 사용 안하기로 했는데 작업자 실수로 작동시켜 버퍼에 롤 걸려있는 상황입니다. 조치 부탁 드립니다. May 28, 2025 at 8:32 PM, Csanálosi Gábor FA : @VK (mcs) pls give you the order to take that to stocker, mine wasnt success. May 28, 2025 at 8:32 PM, VK (mcs) : Checking May 28, 2025 at 8:34 PM, VK (mcs) : Done May 28, 2025 at 8:35 PM, Csanálosi Gábor FA : Thank you May 28, 2025 at 8:36 PM, Csanálosi Gábor FA : All coating agv failures solved May 28, 2025 at 8:45 PM, Csicskovics Balázs : Cathode Roll raktárhoz kŵrnék egy kis segítséget. Köszönöm May 28, 2025 at 9:04 PM, Atif/Ivancsa FA : AGV stuck more than 10 minutes in E0STKC31-TR-MCP do not transfer material no error appeared , other AGV are in queue because of this @FA May 28, 2025 at 9:05 PM, Atif/Ivancsa FA : Need help in Cathode storage area May 28, 2025 at 9:08 PM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 지원부탁드립니다 May 28, 2025 at 9:16 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check this May 28, 2025 at 9:44 PM, Atif/Ivancsa FA : Solved thank you May 28, 2025 at 9:45 PM, KIM SEYEON [김세연]_FA : thanks May 28, 2025 at 9:48 PM, Szücs Géza FT-B : I just finished in the powder area. May 28, 2025 at 9:48 PM, Nagy Dávid 4 : Anod reel raktárhoz kérnék szépen segítséget 10 portnál van elakadva a tálca help help köszönöm szépen May 28, 2025 at 9:55 PM, Czeilinger Krisztián : Megyek. May 28, 2025 at 10:07 PM, Nagy Dávid 4 : Anod press 1 U/W agv kiált hibára help help köszönöm szépen May 28, 2025 at 10:15 PM, Czeilinger Krisztián : Megyek. May 28, 2025 at 10:30 PM, Szarka Adrián : Sziasztok anod Press 7 uw robot megállt May 28, 2025 at 10:30 PM, Szarka Adrián : Gyertek legyszives May 28, 2025 at 10:31 PM, Pálosi Róbert : Kész May 28, 2025 at 10:31 PM, Pálosi Róbert : Megyek May 28, 2025 at 11:02 PM, Pálosi Róbert : Kész May 29, 2025 at 12:18 AM May 29, 2025 at 12:18 AM, Csicskovics Balázs : Press 2 cathode nincs AGV 20 perc, u/w Köszönöm May 29, 2025 at 12:24 AM, Szarka Adrián : @Szücs Géza FT-B anod Press 7 gépen a robot és az agv nem a legjobban működik elég sok vele a gond. Tudsz valakinek jelezni hogy nézzek még holnap nappal. Mert gondolom most éjjel nincs senki itt aki ott állna és nézne hogy mi a baj. May 29, 2025 at 12:27 AM, Szücs Géza FT-B : jelezni fogom, de ma délelőtt is sok volt vele a baj May 29, 2025 at 12:28 AM, Szarka Adrián : Köszönöm szépen. Igen sajnos mondta a nappalos. Hát nem sokat használtuk azt a gépet és nincs gondolom be lőve még. De mostantól menni fog a 7 gep is, és így jó lenne ha be állítanák azt is mint a Press 1-2-3-4 gépen mennek mert azok jók May 29, 2025 at 12:44 AM, Nagy Dávid 4 : Katod reel raktárhoz kérnék szépen segítséget 10 port megint elakadt help help köszönöm szépen May 29, 2025 at 12:45 AM, Szücs Géza FT-B : ezekről tudnál képeket csinálni? May 29, 2025 at 12:47 AM, Nagy Dávid 4 : Ha lenne fényképező gép ami van csak valahol akkor igen szólj a kollégáknak aki be van osztva oda hogy csináljon egy párat köszönöm szépen May 29, 2025 at 12:50 AM, Czeilinger Krisztián : Megyünk.. May 29, 2025 at 1:13 AM, Nagy Dávid 4 : Katod reel raktárhoz kérnék szépen segítséget most az üres tálca elakadt help help köszönöm szépen May 29, 2025 at 1:14 AM, Nagy Dávid 4 : Ugyan az a helyszín 10 port May 29, 2025 at 1:49 AM, Csicskovics Balázs : Ismét nem hoz anyagot az AGV!! Press 2 cathode nincs AGV 20 perc, u/w Köszönöm May 29, 2025 at 1:55 AM, Czeilinger Krisztián : A 14-es AGV fogja vinni az order szerint. May 29, 2025 at 2:00 AM, Czeilinger Krisztián : E0STKC35 P01 -Ről a E1PRC020 P01 fogja vinni a 14-es AGV. May 29, 2025 at 2:12 AM, Csanálosi Gábor FA : E0CNVC51 elakadás @Pálosi Róbert @Czeilinger Krisztián May 29, 2025 at 2:13 AM, Czeilinger Krisztián : Megyünk. May 29, 2025 at 2:18 AM, Czeilinger Krisztián : Kész. May 29, 2025 at 2:31 AM, Csanálosi Gábor FA : Újabb, kicsit arrébb. May 29, 2025 at 2:32 AM, Czeilinger Krisztián : Megyünk May 29, 2025 at 2:33 AM, Dana Honak : Cathode slitt 2 r/w robot problema . Convejor stop. May 29, 2025 at 2:39 AM, Czeilinger Krisztián : Kész. May 29, 2025 at 2:40 AM, Czeilinger Krisztián : Kész. May 29, 2025 at 3:03 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián merre vagytok? May 29, 2025 at 3:05 AM, Czeilinger Krisztián : Kantinban. May 29, 2025 at 3:05 AM, Czeilinger Krisztián : Megyünk be. May 29, 2025 at 3:06 AM, Szücs Géza FT-B : mindketten... az szép jól megy .... May 29, 2025 at 3:13 AM, Szarka Adrián : Anod Press 2 re nem jön az agv May 29, 2025 at 3:13 AM, Nagy Dávid 4 : Anod press 2 agv nem hoz anyagot help help help köszönöm szépen May 29, 2025 at 3:15 AM, Szücs Géza FT-B : @mcs please May 29, 2025 at 3:16 AM, VK (mcs) : @FA Please check Anode roll STK A31- port 1 May 29, 2025 at 3:17 AM, Szarka Adrián : Thanks May 29, 2025 at 3:32 AM, Nagy Dávid 4 : Anod press 7 R/W 7 számú agv pozíció probléma help help köszönöm szépen May 29, 2025 at 3:33 AM, Nagy Dávid 4 : Oké megoldottam köszi May 29, 2025 at 3:52 AM, Pálosi Róbert : Köszönjük May 29, 2025 at 4:06 AM, Nagy Dávid 4 : Anod press R/w agv error anod press 7 help help köszönöm szépen May 29, 2025 at 4:07 AM, Szarka Adrián : @Czeilinger Krisztián szerintem megint nem találja az agv a pozíciót ma már 15 alkalommal csinálta. Agv manuális ba raktam majd vissza automata és be állt a helyére. Legyszi inditsd így újra az agv. Köszönöm May 29, 2025 at 4:08 AM, Czeilinger Krisztián : Megyek May 29, 2025 at 4:17 AM, Czeilinger Krisztián : Kész May 29, 2025 at 4:42 AM, Nagy Dávid 4 : Anod slitt 1 robot probléma help help köszönöm szépen May 29, 2025 at 4:45 AM, Czeilinger Krisztián : Megyünk. May 29, 2025 at 5:27 AM, Szarka Adrián : Anod Press 7 gépen UW oldalon ahogy megy a robot kattog - nyikorog most kezdte el. @Mr.Miti (미티) FA @Szücs Géza FT-B May 29, 2025 at 5:37 AM, Szarka Adrián : @Mr.Miti (미티) FA majd anod Press 8 is meg kéne nézni hogy ott működik e a robot, mert azt a gépet is használni fogjuk. És AUDIT alatt ott se működött May 29, 2025 at 5:43 AM, Szücs Géza FT-B : de ő 6kor kezd May 29, 2025 at 5:44 AM, Szarka Adrián : Tudom. De ő lesz nappal és mindjárt megyünk mi haza May 29, 2025 at 6:04 AM, Mohammad Amir : @FA Please check E0CNVA51_P01 there is INV-01 Run time Over Error and it is blocking Materials recovery resulting there is a queue of materials. Thank you very much! May 29, 2025 at 6:05 AM, Mr.Miti (미티) FA : Cheking May 29, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 29, 2025 at 6:14 AM, 김대호 (Kim Dae Ho) : Cathode slitet 2 Please check the L/R May 29, 2025 at 6:14 AM, Mohammad Amir : Good Morning, Checking. Thank you very much! May 29, 2025 at 6:19 AM, Mohammad Amir : For your information:- LR received successfully at 4:20 ,Roll RBC2366 assigned to it. @FA @ACS Please check RBC2366 located at currently E0STKC34_P02 , Everything is good from MCS RTD side ✅. However it is not moving and AGV is not being assigned to it yet , please check physically. Thank you very much! May 29, 2025 at 6:22 AM, 김대호 (Kim Dae Ho) : Cathode sliter 2 The delayed time after L/R in the facility has been so far. It’s 85 minutes. 양극 슬리팅 2호기 Agv 반송지연 현재 85분째 입니다. 확인부탁드립니다. May 29, 2025 at 6:25 AM, Mr.Miti (미티) FA : RBC2366 It was released to the first floor port. May 29, 2025 at 6:25 AM, Mr.Miti (미티) FA : Good morning! (beams) May 29, 2025 at 6:36 AM, Mohammad Amir : This message was deleted. May 29, 2025 at 6:37 AM, Mohammad Amir : Good morning, There is two path available to complete this command even if it released on first floor:- First Path:- E0STKC34->E0JGVC31->E0STKC34->E0FGV001->E1SLC020 Second Path:- E0STKC34->E0JGV031->E0STKC35->E0FGV001->E1SLC020. Please let me know E0JGVC31 is in use or not ? Thank you very much! May 29, 2025 at 6:39 AM, Mr.Miti (미티) FA : Not used these agvs 🥲 May 29, 2025 at 6:40 AM, Mohammad Amir : In this case I am cancelling the job as these job cancelled not be executed and there will more daley. Please send RBC2366 back to warehouse. Afterwards @김대호 (Kim Dae Ho) please press LR again and materials will arrive again. Thank you very much! May 29, 2025 at 6:43 AM, Mohammad Amir : Issue has been resolved ✅. Job has been cancelled and based new LR new roll RBC2796 has been assigned and it is on its way to slitter cathode -2. I am monitoring. Thank you very much! May 29, 2025 at 6:43 AM, Mr.Miti (미티) FA : Yes I know! I Do this! Thank you very much! May 29, 2025 at 6:44 AM, Mohammad Amir : You are welcome! May 29, 2025 at 6:44 AM, 김대호 (Kim Dae Ho) : The L/R of the facility is pressed. May 29, 2025 at 6:44 AM, Mohammad Amir : Yes, LR received successfully and new Roll RBC2796 on its way. ✅ Thank you very much! May 29, 2025 at 6:45 AM, 김대호 (Kim Dae Ho) : Thank you! May 29, 2025 at 6:46 AM, Mohammad Amir : You are welcome! May 29, 2025 at 7:15 AM, Mr.Miti (미티) FA : @Mohammad Amir @김대호 (Kim Dae Ho) RBC2366 successfully re-stored STKC34 02-006-02 May 29, 2025 at 7:15 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 7:15 AM, Mr.Miti (미티) FA : You’re welcome May 29, 2025 at 7:20 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 2호기 AGV반송 지연 39분 발생 하였습니다. Cathode sliter 2 Agv return delay 39 minutes May 29, 2025 at 7:23 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please check ca slitter 2 lr May 29, 2025 at 7:24 AM, Mohammad Amir : Good morning Sir, Checking. May 29, 2025 at 7:26 AM, Mohammad Amir : Sir, Last LR was received at 6:38 Roll RBC2796 has been assigned. It has reached at Slitter -2 Cathode P01 at 7:25. I am checking the reason for delay. Afterwards there is no LR. Thank you very much! May 29, 2025 at 7:29 AM, Mohammad Amir : Sir, There was delay because Assigned AGV #7 for E1SLC020_P01 was in LD/UD step timeout alarm . Thank you very much! May 29, 2025 at 7:32 AM, Mohammad Amir : Sir, For your information:- New LR has been received for Slitter cathode -2 at 7:27. Roll RBC2808 on the way on AGV#13 ✅. I am monitoring. Thank you very much! May 29, 2025 at 7:45 AM, Mohammad Amir : Sir Update:- Roll RBC2808 has arrived successfully at E1SLC020_P01 at 7:42. ✅ Short summary :- LR received And Job created at 7:27. AGV#13 has assigned at 7:28. Job was completed at 7:42 . So in total it took around 15 minutes this is normal process time. In case of RBC2796, because of AGV Alram there was a delay. Thank you very much! May 29, 2025 at 9:45 AM, Oleksii Krasnoshchok : Hello in anode press 7 problem stopped transfer r/w May 29, 2025 at 9:46 AM, Mr.Miti (미티) FA : Érkezem! May 29, 2025 at 9:54 AM, Szeitz Flórián : Sziasztok! Katód Slitt 3 ra légyszives nézzétek meg van e elérhető anyag. MES szerint van még egy kevés de lehet raktárba nincs . Köszönöm May 29, 2025 at 9:54 AM, Mohammad Amir : Hello, I am checking. May 29, 2025 at 9:55 AM, Mohammad Amir : Unfortunately, Currently there is no transferable material available for Cathode Slitter -3. Thank you very much! May 29, 2025 at 10:42 AM, 김대호 (Kim Dae Ho) : Cathode sliter 2 Please check the L/R May 29, 2025 at 10:42 AM, Mohammad Amir : Sure ,I am checking! May 29, 2025 at 10:45 AM, 지찬우 : Cathode press 2 Please check the U/W L/R May 29, 2025 at 10:46 AM, 지찬우 : 양극 프레스 2호기 AGV반송 지연 35분 발생 하였습니다. Cathode press 2 Agv return delay 35 minutes May 29, 2025 at 10:47 AM, Mohammad Amir : LR received successfully at 10:04 and Roll RBC2366 has assigned . However currently roll is at E0STK034_P02(1F) from here,there is no route available to go to Slitter cathode -2 because as @Mr.Miti (미티) FA informed E0JGVC31 is not in Use. @Mr.Miti (미티) FA Please cancel and send RBC2366 back to warehouse. @김대호 (Kim Dae Ho) please press LR again ,so that new Roll can arrive. Thank you very much! May 29, 2025 at 10:47 AM, Mohammad Amir : Checking May 29, 2025 at 10:48 AM, Mr.Miti (미티) FA : Again? May 29, 2025 at 10:48 AM, 김대호 (Kim Dae Ho) : I pressed L/R again. May 29, 2025 at 10:48 AM, Mr.Miti (미티) FA : @Mohammad Amir . May 29, 2025 at 10:49 AM, Mohammad Amir : Yes this phenomena occured again. Please proceed. We will examine the scenario in detail. Thank you very much! May 29, 2025 at 10:53 AM, Mohammad Amir : Sir, LR received successfully at 9:57. AGV#14 has delivered the Roll RBC2841 ✅. You witnessed delay because earlier assigned AGV#1 and #13 was in AGV retry count exceeded Alaram And Port E0STKC31_P01 was OOS. Thank you very much! May 29, 2025 at 10:53 AM, Mr.Miti (미티) FA : Okay. I send it back again. And after its done please make a manual job for this roll to trasfered to slitt. I write when I finished. Thank you! May 29, 2025 at 10:54 AM, Mohammad Amir : Please first cancel the Job for RBC2366 from SCS side. From MCS cancellation getting failed so only from CCS cancellation is possible. Thank you very much! May 29, 2025 at 10:55 AM, Mohammad Amir : I will inform you when to press LR. Thank you very much! May 29, 2025 at 10:56 AM, Mr.Miti (미티) FA : In on it! May 29, 2025 at 10:57 AM, Karina Lyzanets : Cathode Slitt 2 re AGV robot nem hozzá az anyagot Kérlek nézzetek meg, köszi May 29, 2025 at 10:57 AM, Mohammad Amir : Hello, We are working on this issue. Thank you very much! May 29, 2025 at 10:57 AM, Mr.Miti (미티) FA : Working on iz May 29, 2025 at 10:58 AM, Mr.Miti (미티) FA : Please check lr. I delet job and re request lr. May 29, 2025 at 10:59 AM, Mohammad Amir : Thank you, it has deleted. May 29, 2025 at 10:59 AM, Mr.Miti (미티) FA : RBC2855 on the way. May 29, 2025 at 10:59 AM, Mohammad Amir : @김대호 (Kim Dae Ho) LR has received successfully at 10:58 now Roll RBC2855 on the way ✅ I am monitoring. Thank you very much! May 29, 2025 at 11:06 AM, Mohammad Amir : AGV#1 on the way to slitter cathode -2. ✅ Thank you! May 29, 2025 at 11:09 AM, Mr.Miti (미티) FA : I thank you too! May 29, 2025 at 11:10 AM, Mohammad Amir : You are welcome! May 29, 2025 at 11:19 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKA32 there is SCP main. Power CP trip error and two jobs are pending because of this issue. Thank you very much! May 29, 2025 at 11:20 AM, Mr.Miti (미티) FA : Im on 1F. Now transfering back rbc2366. But technicans on it (thumbsup) May 29, 2025 at 11:20 AM, Mohammad Amir : @cehmannzsoltcehmann @FA Please check E0STKA52_C01/C02 these cranes are inactive without error and there will be shortages of Anode Slitter trays. Please check this issue on Priority. Thank you very much! May 29, 2025 at 11:20 AM, Mohammad Amir : Thank you very much 🙏. May 29, 2025 at 11:23 AM, adambenczik : Solved May 29, 2025 at 11:23 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 11:32 AM, Mohammad Amir : @adambenczik @FA Please take action on this ,it still exists. There will shortages of Empty Anode trays for Andoe Slitter Production. Thank you very much! May 29, 2025 at 11:34 AM, 임동현 : Cathode sliter 2 Please check the L/R May 29, 2025 at 11:35 AM, Mr.Miti (미티) FA : Agv stuck. Technicans on it. May 29, 2025 at 11:35 AM, Mohammad Amir : Sure Sir, checking. May 29, 2025 at 11:36 AM, adambenczik : Working on it May 29, 2025 at 11:37 AM, 임동현 : Okay. May 29, 2025 at 11:37 AM, Mohammad Amir : LR received successfully at 11:17. AGV#21 has assigned. Now it is moving and reaching slitter cathode -2 destination. Thank you! May 29, 2025 at 11:37 AM, Mr.Miti (미티) FA : RBC2366 -> 01-008-01 please make a manual job to transzfer ca slitt 2. May 29, 2025 at 11:38 AM, adambenczik : AGV13 is coming with the material May 29, 2025 at 11:40 AM, Mohammad Amir : @ACS Please transfer manually as I do not have permission to transfer the roll to process machine directly,unfortunately. Thank you very much! May 29, 2025 at 11:42 AM, Mr.Miti (미티) FA : So sad! I try it. Thank you for hard work! (thumbsup) May 29, 2025 at 11:43 AM, Mohammad Amir : You are welcome. If you need any further assistance feel free to contact me ,I am glad to help you. May 29, 2025 at 11:48 AM, Mr.Miti (미티) FA : Job created. May 29, 2025 at 11:48 AM, Mohammad Amir : Thank you very much 🙏. May 29, 2025 at 12:41 PM, Oleksii Krasnoshchok : In anode press 7 problem with Agv in u/w May 29, 2025 at 12:43 PM, Mr.Miti (미티) FA : Coming May 29, 2025 at 1:18 PM, Karina Lyzanets : Sziasztok! Cathode Slitt 1 mögött megállt a Conveyor pálya. Reel tálca pozíció hiba. Légyszives nézzétek meg. May 29, 2025 at 1:18 PM, Mr.Miti (미티) FA : Rendben May 29, 2025 at 1:25 PM, Mr.Miti (미티) FA : Készen van May 29, 2025 at 1:36 PM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check E0CNVC51_08_052/053 there Is InV -01 run time over error and it has blocked materials recovery. Thank you very much! May 29, 2025 at 1:37 PM, Mr.Miti (미티) FA : Okay May 29, 2025 at 1:52 PM, Mr.Miti (미티) FA : Solved May 29, 2025 at 1:52 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 2:02 PM, 김대호 (Kim Dae Ho) : Anode press 8 Please check the L/R Thank you ! @Mohammad Amir May 29, 2025 at 2:02 PM, Mohammad Amir : Sure ,Checking. Thank you very much! May 29, 2025 at 2:03 PM, Mohammad Amir : We didn't receive any LR. Please press again. Thank you very much! May 29, 2025 at 2:10 PM, 지찬우 : Anode slitt 2 Please check the L/R May 29, 2025 at 2:11 PM, Mohammad Amir : Checking May 29, 2025 at 2:12 PM, 김대호 (Kim Dae Ho) : Can you one more check? May 29, 2025 at 2:14 PM, Sazzad Bhai SKon : There's no LR received for today May 29, 2025 at 2:15 PM, Sazzad Bhai SKon : E1PRA080_P01 May 29, 2025 at 2:18 PM, 지찬우 : I sent the signal again Anode press 8 May 29, 2025 at 2:19 PM, Mohammad Amir : LR received successfully at 13:38 And job created ✅. It is not moving because of SCS error. @FA Please check RBA2853 located at E0STKA31_P01 (3016) there is Cargo exists that's why job for Anode Slitter -2 can not proceed. Thank you very much! May 29, 2025 at 2:19 PM, Sazzad Bhai SKon : This time received at 14:17 Job created. May 29, 2025 at 2:20 PM, 김대호 (Kim Dae Ho) : Thank you. And please check Cathode sliter 2 L/R May 29, 2025 at 2:21 PM, Mohammad Amir : Checking May 29, 2025 at 2:22 PM, Mohammad Amir : LR received successfully at 13:28 . AGV#21 has assigned with RBC2871. ✅ Checking for delay. Thank you very much! May 29, 2025 at 2:23 PM, 김건희 : @배일명 대리님 FA 김동주 PM님께서 Foil창고 크래인 30분 비가동&점검 필요하다고 하는데 금일 몇시부터 가능할까요 May 29, 2025 at 2:25 PM, Mohammad Amir : AGV#21 has successfully delivered the materials ✅ Due to AGV LD/UD step timeout you witnessed delay. Thank you very much! May 29, 2025 at 2:26 PM, 김대호 (Kim Dae Ho) : Thank you for answering. May 29, 2025 at 2:29 PM, Mohammad Amir : You are welcome! May 29, 2025 at 2:34 PM, 김대호 (Kim Dae Ho) : Is there any action? The facility will soon stop. May 29, 2025 at 2:35 PM, Mohammad Amir : @adambenczik Could you please check this issue,it is blocking materials delivery to Slitter Anode -2. Thank you very much! May 29, 2025 at 2:37 PM, KIM SEYEON [김세연]_FA : @지석범PM (이반차FA) 피엠님 도움 부탁드립니다. May 29, 2025 at 2:38 PM, Mohammad Amir : Dear Sir, Issue has been resolved ✅. AGV#24 has been to slitter Anode-2 now. I am monitoring. Thank you very much! May 29, 2025 at 2:38 PM, Mohammad Amir : @김대호 (Kim Dae Ho) For your information! Thank you very much! May 29, 2025 at 3:47 PM, Szeitz Flórián : Sziasztok! Anód slitt 2 mögött megàllt a Conveyor pálya. Légyszives nézzétek meg. Köszönöm May 29, 2025 at 3:49 PM, Mr.Miti (미티) FA : Megyek May 29, 2025 at 4:02 PM, 지찬우 : Anode press 7 R/W Not coming Agv check please May 29, 2025 at 4:02 PM, Mr.Miti (미티) FA : Nézem May 29, 2025 at 4:04 PM, Mr.Miti (미티) FA : AGV is on the way (thumbsup) May 29, 2025 at 4:21 PM, 김대호 (Kim Dae Ho) : Anode sliter 2 Please check the L/R @Mohammad Amir May 29, 2025 at 4:21 PM, Mohammad Amir : Checking May 29, 2025 at 4:22 PM, Mohammad Amir : LR received successfully and Job has created at 15:16. ✅ Roll RBA2859 on the way. Checking reason for delay. Thank you! May 29, 2025 at 4:24 PM, Mohammad Amir : @FA @adambenczik Please check E0STKA32_P01(3017) ,there is a cargo RBA2883 located here , please remove it,it is blocking the Roll delivery to Anode Slitter -2. Thank you very much! May 29, 2025 at 4:25 PM, Mr.Miti (미티) FA : Checking May 29, 2025 at 4:27 PM, Mr.Miti (미티) FA : Solved May 29, 2025 at 4:28 PM, Mohammad Amir : Thank you very y! May 29, 2025 at 4:28 PM, Mr.Miti (미티) FA : You’re welcome May 29, 2025 at 4:43 PM, Szeitz Flórián : Sziasztok! Anód roll raktár 3 stokerben kiállt a robot hibára. Gyertek légyszives köszönöm May 29, 2025 at 4:44 PM, Mohammad Amir : Issue has been resolved ✅. AGV#18 has been assigned for Anode Slitter -2. Thank you! May 29, 2025 at 4:51 PM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check Assigned AGV#18 is under LD/UD step timeout error. Thank you! May 29, 2025 at 4:53 PM, cehmannzsoltcehmann : @Mohammad Amir pls check what is this roll is, carrier id is EC1P073F52L31 May 29, 2025 at 4:53 PM, Mohammad Amir : Checking May 29, 2025 at 4:54 PM, Mr.Miti (미티) FA : Issue solved (thumbsup) May 29, 2025 at 4:55 PM, Karina Lyzanets : Cathode oldalon megállt a convejor palyá May 29, 2025 at 4:55 PM, Mohammad Amir : Hello, Carrier id of Lot id EC1P073F52L31 is RBC2896. Current location is E0STKC34(0100206). Feel free to ask me if you need more information. Thank you very much! May 29, 2025 at 4:55 PM, Karina Lyzanets : Köszönöm a segitséget May 29, 2025 at 4:56 PM, Mr.Miti (미티) FA : Coming May 29, 2025 at 4:57 PM, 김대호 (Kim Dae Ho) : Anode slitet 2 roll hasn't come yet. May 29, 2025 at 4:58 PM, Mohammad Amir : AGV#18 has already been assigned but it was in Error that's why not coming. Now everything is fixed and AGV#18 on the way. ✅ I am monitoring. Thank you very much! May 29, 2025 at 5:00 PM, 김대호 (Kim Dae Ho) : Anode sliter 2 Agv delay time 63 minutes 음극 슬리팅 Agv 지연 시간 63분 발생중 입니다. May 29, 2025 at 5:04 PM, Mohammad Amir : AGV#18 has finally arrived at Anode Slitter -2. ✅ Thank you very much! May 29, 2025 at 5:04 PM, Vörös Geri : Katód press 1 a 21 és AGV nem jön ki az R/W nél.megnéznétek?köszi May 29, 2025 at 5:07 PM, Mr.Miti (미티) FA : Persze May 29, 2025 at 5:07 PM, adambenczik : Már kész May 29, 2025 at 5:07 PM, adambenczik : Itt vagyunk veled szemben Miti May 29, 2025 at 5:17 PM, cehmannzsoltcehmann : @Mohammad Amir pls check what is the roll id, this is the carrier id: EC1P073F52L32 thank you May 29, 2025 at 5:18 PM, Mohammad Amir : Checking May 29, 2025 at 5:20 PM, Mohammad Amir : Carrier id of Lot EC1P073F52L32 is RBC2894. ✅ Location:- E1CTC010_P02. Thank you very much! May 29, 2025 at 5:22 PM, cehmannzsoltcehmann : Thank you Sir for you Hard work✌️ May 29, 2025 at 5:23 PM, Mohammad Amir : You are most welcome. May 29, 2025 at 6:01 PM, Viktor Vadas : Sziasztok! Coatingon Katod 1-en csak az 1-es rewinderen hasznalunk AGV-t mint tegnap Anod 1-en mindketton! May 29, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.29. "B" műszak, 9+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Böröczki Balázs --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(1): 김지수 May 29, 2025 at 6:28 PM, Csicskovics Balázs : Sziasztok nincs AGV 10 perc u/w, press 2 Nézzétek meg Köszönöm May 29, 2025 at 6:30 PM, Czeilinger Krisztián : Anode ,cathode? May 29, 2025 at 6:31 PM, Csicskovics Balázs : Oooo bocsánat cathode May 29, 2025 at 6:32 PM, Czeilinger Krisztián : Egyenlőre az orderben nem látom hogy menne AGV a Cathode press 2 u/w-re. May 29, 2025 at 6:33 PM, Viktor Vadas : Sziasztok! Coating Anod 1en amig varunk a minosegbeli eredmenyekre addig nem hasznalunk AGV-t! May 29, 2025 at 6:35 PM, Csicskovics Balázs : Újra indítottam. May 29, 2025 at 6:35 PM, Czeilinger Krisztián : Nézem. May 29, 2025 at 6:39 PM, Czeilinger Krisztián : A 14-es AGV fogja a rollt vinni. May 29, 2025 at 6:43 PM, Csicskovics Balázs : Köszönöm May 29, 2025 at 7:18 PM, Hakim/Ivancsa FA : E0STK31 -TR-MCP ALARM- IPS reading fail @fa please check May 29, 2025 at 7:19 PM, Shakir (MCS) : @FA Please check E0STKC32_C01 there is MCP main Power CP trip error. Thank you! May 29, 2025 at 7:30 PM, Dana Honak : Cathode slitt 2 u/w robot problema . May 29, 2025 at 7:33 PM, Shakir (MCS) : @FA Please check E0STKC34_P01 is OOS, job getting delayed. Thank you May 29, 2025 at 7:35 PM, Czeilinger Krisztián : Megyek May 29, 2025 at 7:47 PM, Szücs Géza FT-B : @Shakir (MCS) csan you check, what is the proble with RBA2681? May 29, 2025 at 7:49 PM, 김지수PM(Gyuri)_FA : @fa could you please check cargo detection sensor on E0STKA53_M01, even if there is cargo on the port, cargo detection sensor sometimes cannot be detected. Thanks May 29, 2025 at 7:50 PM, Szücs Géza FT-B : No, we cant. MCS buzzer is the error May 29, 2025 at 7:50 PM, Shakir (MCS) : Rack in reply not successful because lot already received from STK. MES error Thank you May 29, 2025 at 7:52 PM, Szücs Géza FT-B : @Nagy Dávid 4 @Szarka Adrián Légysives utána tudtok nézni a MES-ben mi a baj az RBA2681 Bobinnal? May 29, 2025 at 7:52 PM, 김지수PM(Gyuri)_FA : Okey thanks! May 29, 2025 at 7:52 PM, Szücs Géza FT-B : Thank You very much May 29, 2025 at 7:53 PM, Szarka Adrián : Igen. Kicsit később. May 29, 2025 at 7:55 PM, Szücs Géza FT-B : oksi Srácok hagyátok nyugodtan ott az STK A35-öt. May 29, 2025 at 7:55 PM, 김지수PM(Gyuri)_FA : Seems like 34 also has same problem 🥲 May 29, 2025 at 7:56 PM, Szarka Adrián : Igen most szóltak hogy az 5 os 4 és raktárban olyan anyag van amit nem lehet be küldeni automatán. Az egyik No lot a másik zárolt roll May 29, 2025 at 7:57 PM, Szücs Géza FT-B : we can't do anything about it May 29, 2025 at 7:58 PM, 김지수PM(Gyuri)_FA : Menjünk enni May 29, 2025 at 8:00 PM, Szücs Géza FT-B : gyere kávézni May 29, 2025 at 8:22 PM, Anton Mashchenko : Hello, cathode press 1, AGV not coming 10 min! Help! Thanks! And cathode press 2 AGV never arrived… May 29, 2025 at 8:24 PM, Shakir (MCS) : @FA Please check the C31 P01 is OOS, Job getting delayed for Press2 CA Thank you May 29, 2025 at 8:28 PM, Shakir (MCS) : AGV13 assigned for press1 but agv13 idle. @FA please check AGV13 May 29, 2025 at 8:31 PM, Shakir (MCS) : @Czeilinger Krisztián May 29, 2025 at 8:39 PM, Czeilinger Krisztián : Nemsokára megyek. May 29, 2025 at 8:52 PM, Pálosi Róbert : } plese send New order power anod 1, 2, Agv! May 29, 2025 at 8:53 PM, Pálosi Róbert : Shakir May 29, 2025 at 8:55 PM, Shakir (MCS) : AGV01 has already job for Slitt3 on the way. May 29, 2025 at 9:10 PM, Pálosi Róbert : They go back and forth between two points. May 29, 2025 at 9:39 PM, Hakim/Ivancsa FA : Cathode rolling site E0STK31 -TR-MCP Alarm - door open error (HP) @fa can you check May 29, 2025 at 9:40 PM, Hakim/Ivancsa FA : Solved May 29, 2025 at 9:40 PM, Hakim/Ivancsa FA : Thanks May 29, 2025 at 9:43 PM, 김지수PM(Gyuri)_FA : @최기수(GI SU CHOI) 시간있으실 때, STK HMI 화면에서 문 어떻게 열고, 닫는지 교육 좀 부탁드릴게요. May 29, 2025 at 9:43 PM, 최기수(GI SU CHOI) : 넵 알겠습니다 May 29, 2025 at 10:08 PM, (Unknown) left this chatroom. May 29, 2025 at 10:32 PM, Yanina : Sziasztok) Anód slitt nem halad a kész anyag a szalagon. Kérem, nézze meg May 29, 2025 at 10:32 PM, Szücs Géza FT-B : @Czeilinger Krisztián Slitt CVt nézd meg légyszi May 29, 2025 at 10:33 PM, Czeilinger Krisztián : Megyek. May 29, 2025 at 10:55 PM, Viktoriia Hleba : 2-3 slitter stop. Convejor stop. May 29, 2025 at 10:56 PM, Szücs Géza FT-B : AN? May 29, 2025 at 10:56 PM, Viktoriia Hleba : anode May 29, 2025 at 11:08 PM, Viktoriia Hleba : 1-2-3 slitter anode stop. Convejor stop. May 29, 2025 at 11:09 PM, Shakir (MCS) : @Fa Please check Run time over error E0CNVA51_06_014/13 Thank you May 29, 2025 at 11:09 PM, 김대호 (Kim Dae Ho) : Please help @fa May 29, 2025 at 11:24 PM, 장정훈 : @KIM SEYEON [김세연]_FA @김건희 @FA @방혁 PM(Bang.Hyuk) FA Cathode Slitter2 Transfer Buffer X,Y,Z축 티칭값이 전부0으로 바뀌었습니다 또한 X축 조그 동작시 반대로 움직이는 현상으로 AGV 운영을 할 수가 없습니다 도움 부탁 드립니다! Cathode Slitter2 Transfer Buffer X, Y, and Z axis teaching values have all changed to zero. Also, AGV cannot be operated due to reverse movement during X axis jog operation. Please help! May 29, 2025 at 11:25 PM, 김지수PM(Gyuri)_FA : CS 요청했습니다. May 29, 2025 at 11:32 PM, Shakir (MCS) : Now the conveyor carrier moving. May 29, 2025 at 11:34 PM, Viktoriia Hleba : thanks May 29, 2025 at 11:40 PM, 장정훈 : Transfer 각축 원점 미복귀 문제로 U/W Turret position 변경 불가로 슬리터 생산 진행도 어렵습니다! It is difficult to proceed with production because the Transfer Axis origin cannot be returned and the U/W turret position cannot be changed! May 29, 2025 at 11:49 PM, Nagy Dávid 4 : Anod press 1 AGV nem hozza az anyagot help help help köszönöm szépen May 29, 2025 at 11:51 PM, Yanina : Anód slitt conveer probléma May 29, 2025 at 11:52 PM, Yanina : Kérem, nézze meg May 29, 2025 at 11:52 PM, Böröcz Tamás : I paused track 6069 in CVA53 the reason: too many full reel was on the that stk cannot supply empty carriers May 29, 2025 at 11:52 PM, Nagy Dávid 4 : Anod slitt 3 May 29, 2025 at 11:54 PM, Böröcz Tamás : ? May 29, 2025 at 11:54 PM, Böröcz Tamás : Megy May 29, 2025 at 11:55 PM, Böröcz Tamás : @mcs May 29, 2025 at 11:55 PM, Yanina : Most jó, lassan mennek. May 29, 2025 at 11:56 PM, Böröcz Tamás : Szoki May 29, 2025 at 11:56 PM, Böröcz Tamás : De legalább megy 😂 May 30, 2025 at 12:00 AM May 30, 2025 at 12:00 AM, Shakir (MCS) : AGV08 on the way to Press1 Thank you May 30, 2025 at 1:36 AM, Szücs Géza FT-B : @Pálosi Róbert van egy AGV hibában, kérlek intézkedjetek May 30, 2025 at 1:44 AM, Viktor Vadas : Sziasztok! Segitseget szeretnek kerni Katod 1 1-es rewinderhez, Koreai tamogato bement a fenyfuggonyon es nem tudom visszakapcsolni! May 30, 2025 at 1:44 AM, Viktor Vadas : MC power sem a Servo nem reagal May 30, 2025 at 1:44 AM, Czeilinger Krisztián : Megyünk. May 30, 2025 at 1:45 AM, Viktor Vadas : Koszonom! May 30, 2025 at 1:45 AM, Szücs Géza FT-B : @Czeilinger Krisztián be kell nyomni a mágneskapcsólókat, mert nem húznak be teljesen May 30, 2025 at 1:46 AM, Czeilinger Krisztián : Rendben . Köszönöm. May 30, 2025 at 1:47 AM, Szücs Géza FT-B : mind a 3at! May 30, 2025 at 1:47 AM, Czeilinger Krisztián : Kész. May 30, 2025 at 1:48 AM, Czeilinger Krisztián : Kész May 30, 2025 at 1:58 AM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert az AGV még mindig hibában áll, intézkedés szükséges. May 30, 2025 at 2:02 AM, Hakim/Ivancsa FA : Cathode coating rw1 Push abnormal @fa can you check May 30, 2025 at 2:04 AM, 장정훈 : @fa Cathode Roll stk 4 please check!! “Ips reading error fail” May 30, 2025 at 2:05 AM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert Coater AN1 P02-nél mi a baj? May 30, 2025 at 2:06 AM, Hakim/Ivancsa FA : Should they take it out Manually? May 30, 2025 at 2:06 AM, 김지수PM(Gyuri)_FA : @최기수(GI SU CHOI) 확인 좀 부탁드릴게요, 전일이랑 현상이 비슷하면 카톡 남겨주세요 May 30, 2025 at 2:07 AM, Czeilinger Krisztián : AGV-t kell be igazítani hogy a rollt le tudja venni a Transfer. May 30, 2025 at 2:08 AM, Szücs Géza FT-B : if time is short, then yes. can you do it manually? May 30, 2025 at 2:09 AM, Szücs Géza FT-B : sikerült? May 30, 2025 at 2:09 AM, Czeilinger Krisztián : Kész. May 30, 2025 at 2:09 AM, Szücs Géza FT-B : melyik oldal? AN or CA? May 30, 2025 at 2:09 AM, Hakim/Ivancsa FA : This message was deleted. May 30, 2025 at 2:10 AM, Hakim/Ivancsa FA : No it's not in the buffer They just want to take it out as they are doing it in the rw 2 of coating May 30, 2025 at 2:11 AM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert CA1 coatert is nézzétek meg légyszives May 30, 2025 at 2:11 AM, Viktor Vadas : Megtortent ujra:/ ha van idotok kapcsoljatok vissza legyszives, koszonom! May 30, 2025 at 2:12 AM, Szücs Géza FT-B : megint mágneskapcsoló baj lesz valszeg, 98% May 30, 2025 at 2:13 AM, Viktor Vadas : Igen az May 30, 2025 at 2:13 AM, Viktor Vadas : 10000% May 30, 2025 at 2:14 AM, Czeilinger Krisztián : Rendben May 30, 2025 at 2:16 AM, Hakim/Ivancsa FA : Fixed Thanks @fa May 30, 2025 at 2:18 AM, Czeilinger Krisztián : Kézi igazításkor után jó lett az AGV,ki vették a rollt. May 30, 2025 at 2:21 AM, Szücs Géza FT-B : AGV a töltőn megint buta 😭 May 30, 2025 at 2:22 AM, 최기수(GI SU CHOI) : @FA Anode charger_01 Charging is not working. Please check. May 30, 2025 at 2:24 AM, Dana Honak : Cathode slitt 4 ninc AGW May 30, 2025 at 2:24 AM, Czeilinger Krisztián : Nézzük. May 30, 2025 at 2:25 AM, Czeilinger Krisztián : A néger csinálja. May 30, 2025 at 2:26 AM, Czeilinger Krisztián : A 16-os számú AGV fogja menni a rollal. May 30, 2025 at 2:30 AM, Szücs Géza FT-B : ha nem sikerül neki, akkpr segítsetek neki May 30, 2025 at 2:31 AM, Czeilinger Krisztián : Rendben van. May 30, 2025 at 2:50 AM, Czeilinger Krisztián : Nem tud rá csatlakozni a töltőre a 4es AGV AN oldalon. May 30, 2025 at 2:53 AM, Szücs Géza FT-B : miért? May 30, 2025 at 3:08 AM, Czeilinger Krisztián : A töltő dokkolója ki jön és rá is csatlakozik az AGV re kb fél percre és aztán irja ki a hibát. Megnézzük milyen hibát ír ki és meg írom. May 30, 2025 at 3:09 AM, Szücs Géza FT-B : ok May 30, 2025 at 3:14 AM, Böröcz Tamás : Megy May 30, 2025 at 3:14 AM, Böröcz Tamás : Újra kellett indítani az AGVt May 30, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (2): Martina Dávid, Kiss Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 30, 2025 at 6:02 AM, Yena Valerii : Hello, pls come to cathode press 2 May 30, 2025 at 6:12 AM, Somoskövy Martin : Sziasztok. Anode Press 2 és 5 között dugó van. Megnéznétek? Köszönöm. May 30, 2025 at 6:12 AM, Oláh András : Megyünk May 30, 2025 at 6:18 AM, Hári Zoltàn : Sziasztok! Azt az infót kaptam az előző műszaktól, hogy a katód 1 coater 2-es RW-n programhiba miatt nem lehet használni az agv-ket. Szeretnék érdeklődni, hogy ez a probléma mikor fog elhárulni? Előre is köszönöm! May 30, 2025 at 6:18 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.30 Time:06:00~18:00 Jeong woojun Elec 송태용 (Song Taeyong) May 30, 2025 at 6:19 AM, Dániel Hufnágel : Ezt az infót én se kaptam meg pillanat és utanna járok May 30, 2025 at 6:19 AM, Hári Zoltàn : Köszi! May 30, 2025 at 7:34 AM, duzzaman Md (MCS) : @FA Please check Cathode STK C51 - C01 MCP AP error. May 30, 2025 at 8:20 AM, 김건희 : @KIM SEYEON [김세연]_FA 양극 slitter 2호기 작일 야간 19:30분부터 U/W 이재기 작업 대기 포지션 error로 생산진행 불가 하였는데 아직도 조치 미 진행 중입니다 이재기가 작업 대기포지션 신호를 주어야 Slitter 설비도 동작 가능합니다 금일 바로 조치 요청드립니다 May 30, 2025 at 8:21 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 30, 2025 at 8:22 AM, Somoskövy Martin : Anode Slitt 1-en roll levétel után megállt a robotkar és az AGV. Megnéznétek? Köszönöm. May 30, 2025 at 8:24 AM, Szabadi Miki : Poron vagyunk majd egyszer odaérünk May 30, 2025 at 8:31 AM, 조혜근 : 안녕하세요. PM님 작일 야간에 양극 AGV 16번이 롤 창고에서 IPS 리딩 에러 다량 발생하여 롤이 못오는 현상 있었는데 센서 점검 부탁드립니다. 감사합니다. May 30, 2025 at 8:35 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. May 30, 2025 at 8:36 AM, Hári Zoltàn : @Fülöp Csaba ezekszerint már szerdán sem működöt. May 30, 2025 at 8:41 AM, Fülöp Csaba : Köszi May 30, 2025 at 8:42 AM, Fülöp Csaba : Sziasztok Coating Cathode 1-en a 2-es RW javítása mikor lesz kész? Köszönöm May 30, 2025 at 8:43 AM, Szabadi Miki : @Koncz Tamás May 30, 2025 at 9:25 AM, 조혜근 : 양극 롤창고 1호기 AGV가 가져온 롤이 데이터 미스 매치로 UNK로 캐리어 ID가 들어가있는데 해당 문제 왜 발생한건지 확인 부탁드립니다. The roll brought by the AGV of the CA roll warehouse No. 1 has a carrier ID of UNK due to a data mismatch. Please check why this problem occurred. May 30, 2025 at 9:25 AM, Somoskövy Martin : Cathode Press 2 és 5 között 2 AGV nem engedi el egymást. Ránéznétek? Köszönöm. May 30, 2025 at 10:26 AM, duzzaman Md (MCS) : @FA PLEASE CHECK E0STKA31_P01 It's OOS May 30, 2025 at 10:30 AM, Oláh András : Korean team working on it May 30, 2025 at 10:39 AM, 이게리 : Sziasztok! 1-es Katód Coating 2-es RW-nél szerda óta nem működik az AGV! Mikor lesz javítva? Szükségünk van rá a termeléshez!! @KIM SEYEON [김세연]_FA @Koncz Tamás @Deepu Divan FA-Eng May 30, 2025 at 10:54 AM, Deepu Divan FA-Eng : Could you please lake a look @FACS_JaewonShin May 30, 2025 at 10:54 AM, Deepu Divan FA-Eng : *take May 30, 2025 at 11:18 AM, FACS_JaewonShin : Our automation @FACS_Bareum kim and @지석범PM (이반차FA) are checking root cause. May 30, 2025 at 11:24 AM, Somoskövy Martin : Cathode Slitt 4-en megállt a conveyor. Megnéznétek? Köszönöm. May 30, 2025 at 11:24 AM, Oláh András : Meg May 30, 2025 at 11:25 AM, Erik Gerzsenyi : 1-es agv lerobbant cathode press 2-nel May 30, 2025 at 11:25 AM, Erik Gerzsenyi : Itt all mogotte meg 6 May 30, 2025 at 11:25 AM, Erik Gerzsenyi : Nezzetek meg legyszi May 30, 2025 at 11:25 AM, Oláh András : Rendben May 30, 2025 at 11:27 AM, Turianytsia Olesia : Nincsenek tálcák Anode Slitt 3 May 30, 2025 at 11:47 AM, Turianytsia Olesia : A szállítószalag megállt. Anode slitt May 30, 2025 at 12:02 PM, duzzaman Md (MCS) : @FA PLEASE CHECK Eostkc32_p01 Its OOS. Jobs are getting delayed May 30, 2025 at 12:13 PM, Oláh András : Korean team working on it May 30, 2025 at 1:32 PM, 조혜근 : Rolls are not coming to the UW of cathode slitter unit 1. Please check it May 30, 2025 at 1:35 PM, duzzaman Md (MCS) : There is active job. Its on VC 12 now. It got delayed because the storage port got in and out of service several times . May 30, 2025 at 1:40 PM, 조혜근 : The equipment is stopped because the roll didn't come, so please check it quickly May 30, 2025 at 1:42 PM, duzzaman Md (MCS) : Its on AGV12 @ACS PLEASE CHECK May 30, 2025 at 1:47 PM, Oláh András : Arrived May 30, 2025 at 1:50 PM, 조혜근 : Thank you May 30, 2025 at 2:29 PM, 조혜근 : I pressed LR on the UW of the cathode slitter unit 2, so please check if the signal has been sent May 30, 2025 at 2:30 PM, Oláh András : Yes we see on the acs May 30, 2025 at 2:30 PM, duzzaman Md (MCS) : There's existing job .AGV on the way. May 30, 2025 at 2:31 PM, 조혜근 : Thank you for the confirmation May 30, 2025 at 2:55 PM, Koska Szilárd János : gyertek létszives Anód press 1 kiált hibára az agv U/W nél May 30, 2025 at 2:56 PM, Oláh András : Megyünk May 30, 2025 at 3:22 PM, 조혜근 : I pressed LR on the UW of the cathode slitter unit 2, so please check if the signal has been sent May 30, 2025 at 3:26 PM, duzzaman Md (MCS) : There's active job. Its getting delayed for ACS problem. Like AGV RETRY COUNT EXCEEDED, ACS EMERGENCY . ALSO E0STKC35-P01 is going in and out of service frequently VC14 IS ASSIGNED. May 30, 2025 at 3:26 PM, duzzaman Md (MCS) : @FA @ACS Please check May 30, 2025 at 3:27 PM, duzzaman Md (MCS) : Curtently BP01 is OOS. Please check May 30, 2025 at 4:29 PM, Farkas Dániel Elekt : Katod roll raktar 1es daru megallt Nezzetek meg legyszives May 30, 2025 at 4:29 PM, Farkas Dániel Elekt : Koszi May 30, 2025 at 4:29 PM, Oláh András : Megyünk May 30, 2025 at 4:56 PM, duzzaman Md (MCS) : @FA Please check E0CNVC11_RTV01 , and the ports , all are OOS Also the Anode side is same Thank you May 30, 2025 at 5:00 PM, Kozma István : Sziasztok, segítséget kérnénk a katod jumbó raktárba. Rosszul lett becsukva az ajtó. Köszi May 30, 2025 at 5:00 PM, Oláh András : Megyünk May 30, 2025 at 5:10 PM, Oláh András : Somebody climbing in the ports and we see light curtain alarm. I hope somebody just working there May 30, 2025 at 5:57 PM, Shakir (MCS) : @FA Please check the C34 P01 is OOS, Job getting delayed for Slitt4. CA Thank you May 30, 2025 at 6:12 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.30 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 30, 2025 at 8:33 PM, Simon Attila F. A. : There is still a problem that the AGV is positioned with material on the E0STKC33_P01 port in such a way that there is a coil on both the HOMESTAND and the buffer. So nothing can move until the AGV is manually removed from there, which cannot be switched back on until another AGV takes the coil from the HOMESTAND. May 30, 2025 at 9:21 PM, Yanina : Sziasztok) Cathode slitt conveer probléma May 30, 2025 at 9:22 PM, Shakir (MCS) : @Fa Please check Run time over error E0CNVC51_08_04/005 Thank you May 30, 2025 at 9:22 PM, Shakir (MCS) : @Simon Attila F. A. May 30, 2025 at 9:23 PM, Simon Attila F. A. : This message was deleted. May 30, 2025 at 9:25 PM, Simon Attila F. A. : My colleague is already there. May 30, 2025 at 9:29 PM, Viczai Tamás : Done May 30, 2025 at 9:29 PM, Viczai Tamás : Kész May 30, 2025 at 11:11 PM, K.Krisz Coating : Gyertek légyszives kat jumbo raktárhoz,kösze May 30, 2025 at 11:11 PM, Simon Attila F. A. : Ott vagyunk. May 30, 2025 at 11:16 PM, K.Krisz Coating : Katód 2-es raktár ajtó zsanérok el vannak törve. May 31, 2025 at 1:32 AM May 31, 2025 at 1:32 AM, Zsmenyák György : Segítséget kérek anód press 7 AGV probléma az U/W May 31, 2025 at 1:35 AM, Marsi Gábor : Megyek May 31, 2025 at 4:43 AM, Oláh Rajmund : Gyertek légyszives anode press 7 U/W robot probléma May 31, 2025 at 4:43 AM, Viczai Tamás : Megyünk May 31, 2025 at 5:42 AM, Shakir (MCS) : @FA Please check the C34 P01 is OOS Thank you May 31, 2025 at 5:56 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 31, 2025 at 5:58 AM, 오승주 : 양극 1라인 1st 리와인더 AGV 문제 발생하였습니다 확인 부탁드립니다. May 31, 2025 at 6:01 AM, 서지원 : @Fa Could you plz check cathode coating 1st line 1st R/W now? There has AGV problem. May 31, 2025 at 6:02 AM, Hári Zoltàn : Katod 1 coater 1 es rw-re gyertek legyszi! Magneskapcsolo problema! May 31, 2025 at 6:05 AM, Hári Zoltàn : Az May 31, 2025 at 7:04 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.31 Time:06:00~18:00 Jeong woojun Elec 송태용 (Song Taeyong) May 31, 2025 at 8:23 AM, Viktoriia Hleba : Sziasztok 1 slitter cathode nincs AGV- 15 perc May 31, 2025 at 8:23 AM, Mohammad Amir : Hello, Checking May 31, 2025 at 8:24 AM, Oláh András : Agv #14 is on the way May 31, 2025 at 8:24 AM, Mohammad Amir : AGV#14 on the way. ✅ I am monitoring. Thank you! May 31, 2025 at 8:24 AM, Mohammad Amir : Thank you! May 31, 2025 at 9:52 AM, Somoskövy Martin : Sziasztok. A 22-es AGV az Anode roll raktárban megpihent és nem megy az anyagért. Megnéznétek? Köszönöm. May 31, 2025 at 10:28 AM, 조혜근 : Please check the automatic port of anode roll warehouse unit 4. There are two rolls, but AGV does not come May 31, 2025 at 10:28 AM, Oláh András : Checking May 31, 2025 at 10:35 AM, 조혜근 : How many AGVs are coming? May 31, 2025 at 10:35 AM, 조혜근 : It's not a crane problem May 31, 2025 at 10:35 AM, Oláh András : Yes we see and working on it May 31, 2025 at 10:36 AM, 조혜근 : What number AGV? May 31, 2025 at 10:36 AM, Oláh András : Agv 22 is coming May 31, 2025 at 10:38 AM, 조혜근 : May I know why AGV 22 was not coming? May 31, 2025 at 10:38 AM, Oláh András : Agv 7 blocked it on route May 31, 2025 at 10:38 AM, 조혜근 : The roll has not come to the anode press unit 2 for more than 30 minutes May 31, 2025 at 10:39 AM, Mohammad Amir : Checking May 31, 2025 at 10:39 AM, Oláh András : Agv22 now at stk34 May 31, 2025 at 10:39 AM, 조혜근 : AGV No. 22 goes to Roll Warehouse Unit 3 May 31, 2025 at 10:39 AM, 조혜근 : AGV does not come to Unit 4 May 31, 2025 at 10:40 AM, 조혜근 : The roll from Unit 3 is a slitter standby roll May 31, 2025 at 10:41 AM, Mohammad Amir : Sir, Could you please press LR again. ✅ There was an issue with Last LR job. Thank you very much! May 31, 2025 at 10:42 AM, 조혜근 : But why do I have to keep pressing LR when the buffer is on? May 31, 2025 at 10:42 AM, 조혜근 : I'll press LR again May 31, 2025 at 10:43 AM, 조혜근 : I pressed LR again. Please check if there is a signal May 31, 2025 at 10:43 AM, Mohammad Amir : Sir, Because last automated job was terminated by Operator at 9:52. Thank you very much! May 31, 2025 at 10:43 AM, Mohammad Amir : Sure Sir, Checking May 31, 2025 at 10:44 AM, Mohammad Amir : LR received successfully at 10:43 ,Roll RBA3256 on the way ✅. I am monitoring. Thank you very much! May 31, 2025 at 10:46 AM, 조혜근 : We pressed LR when the A-turret was empty because the roll was not coming to the buffer May 31, 2025 at 10:46 AM, 조혜근 : And AGV is still not coming to Roll Warehouse Unit 4 May 31, 2025 at 10:53 AM, Mohammad Amir : @FA @Szabadi Miki Please send RBA3236 back to warehouse as it's job was cancelled and now it is blocking the way for other Roll. Location:-E0STKA34_P01(3019). Thank you very much! May 31, 2025 at 10:54 AM, Oláh András : @Mohammad Amir i dont see any order from e0stka34 May 31, 2025 at 10:55 AM, Oláh András : Okay. I dont know who play with acs and delete orders.... May 31, 2025 at 10:57 AM, Mohammad Amir : @Oláh András There are three orders currently waiting because of this issue :- RBA2379 -Pressing-7 RBA3182-Slitter -2 RBA0474-Press-4 Please check this issue. Thank you very much! May 31, 2025 at 10:57 AM, Oláh András : I give order rba3236 frok stka34 to stka33 May 31, 2025 at 10:57 AM, Oláh András : From* May 31, 2025 at 10:58 AM, Mohammad Amir : Fir your information: Job for RBA3236 was cancelled by Operator at 9:52 and because of this there is delay for all orders. Thank you very much! May 31, 2025 at 10:59 AM, Oláh András : Thank you very much. May 31, 2025 at 10:59 AM, Hári Zoltàn : Technikus kene az anod 1 1es rwre ki be all az agv nem talalja a pozit! Köszi! May 31, 2025 at 10:59 AM, Oláh András : Jovok May 31, 2025 at 11:00 AM, Mohammad Amir : Sir, For Press-2 , Issue has been resolved ✅ And AGV#15 on its way. I am monitoring electrode. Thank you very much! May 31, 2025 at 11:01 AM, 조혜근 : Thank you May 31, 2025 at 11:01 AM, Mohammad Amir : You are welcome Sir. Feel free to contact me again if you need any further assistance. May 31, 2025 at 11:04 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0STKC34_C01 there is Hoist RLS Error. Thank you very much! May 31, 2025 at 11:08 AM, Mohammad Amir : @조혜근 Sir, Update :- Issue has been resolved and now Rolls are on the way to Anode Press-7,4 & slitter -2. ✅ I am monitoring. Thank you very much! May 31, 2025 at 2:25 PM, Viktoriia Hleba : 1 slitter cathode nincs Agv - 16 perc . May 31, 2025 at 2:25 PM, Mohammad Amir : Checking May 31, 2025 at 2:28 PM, Mohammad Amir : @FA @Szabadi Miki Please check ,job for Slitter -1 Cathode is not progressing because we are receiving SCS error:- Please check E0STKC34_P01(4019) has Output H/S Off error. Thank you very much! May 31, 2025 at 2:33 PM, Mohammad Amir : Issue has been resolved ✅ AGV#7 has been assigned. I am monitoring. Thank you very much! May 31, 2025 at 2:33 PM, Oláh András : ~10min May 31, 2025 at 3:13 PM, Somoskövy Martin : Sziasztok. Anode Slitt 1-en lerobbant az AGV az U/W porton belül. Ránéznétek? Köszönöm. May 31, 2025 at 3:14 PM, Szabadi Miki : Mindjárt megyünk vissza porrol May 31, 2025 at 6:14 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.31 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 31, 2025 at 6:17 PM, Ynja/ivancsa FA left this chatroom. June 1, 2025 at 2:59 AM June 1, 2025 at 2:59 AM, Czél Tamás : Sziasztok Katód Slitt 2-re fél órája nem j9n anyag, megnéznétek kérlek? Köszönöm June 1, 2025 at 3:12 AM, Viczai Tamás : Most viszi az AGV. June 1, 2025 at 5:05 AM, Irinyi László : Szervusztok! Kérhetek egy kis segítséget az anód press 2-es géphez? June 1, 2025 at 5:06 AM, Viczai Tamás : Megyünk June 1, 2025 at 5:06 AM, Irinyi László : Köszönöm! June 1, 2025 at 5:51 AM, K.Krisz Coating : Hali! An 1 1 r/w bufferen ragadt egy jumbo. Gyertek. June 1, 2025 at 5:53 AM, 심재윤 : 음극1라인 1st 리와인더 AGV 문제 발생하였습니다 확인 부탁드립니다. June 1, 2025 at 5:53 AM, Hári Zoltàn : Sürgős lenne gyertek légyszi amint lehet! Köszi! June 1, 2025 at 5:53 AM, Dániel Hufnágel : Megyünk June 1, 2025 at 6:18 AM, Koska Szilárd János : Sziasztok Katód slitt1 nél megtudnátok nézni a conveyor pályát mert kiállt hibára köszönöm June 1, 2025 at 6:18 AM, Oláh András : Megyünk June 1, 2025 at 6:24 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs June 1, 2025 at 7:36 AM, 조혜근 : @FA There was an AGV error No. 16 of the cathode roll warehouse No. 5. Please check it. June 1, 2025 at 7:37 AM, Oláh András : Coming June 1, 2025 at 7:47 AM, 조혜근 : 양극 롤창고 2호기 수동포트의 문이 고장났습니다.(경첩이 부러짐) 유지보수 부탁드립니다. The door of the manual port of the cathode roll warehouse unit 2 is broken. (The hinge is broken.) Please repair it. June 1, 2025 at 7:49 AM, Faisal / Ivancsa FA invited Junaeed / Ivancsa FA. June 1, 2025 at 7:49 AM, Oláh András : @Dániel Hufnágel June 1, 2025 at 8:02 AM, Dániel Hufnágel : As soon as we find the new hinge, we will fix it June 1, 2025 at 8:03 AM, 조혜근 : Okay, thank you June 1, 2025 at 9:12 AM, Majláth Martin : Sziasztok! Catod press 1 re szeretnék segítséget kérni. Köszii June 1, 2025 at 9:14 AM, Somoskövy Martin invited ~Lidiia~리디 ~. June 1, 2025 at 11:08 AM, duzzaman Md (MCS) : @FA Please check E0STKC34_P01 is OOS, job getting delayed. Thank you June 1, 2025 at 11:31 AM, duzzaman Md (MCS) : Same error again. Please check. June 1, 2025 at 11:32 AM, Dániel Hufnágel : There is a burning smell at elektrode, there is no technican inside ! As soon as utility checked it we move and start it! June 1, 2025 at 11:32 AM, duzzaman Md (MCS) : Thank you for the information June 1, 2025 at 11:47 AM, 조혜근 : @FA There was an error in cathode roll warehouse unit 4. Please check it June 1, 2025 at 11:49 AM, 조혜근 : There's no problem because the cathode doesn't smell, so why is all the people out? June 1, 2025 at 11:49 AM, 조혜근 : The cathode is still being produced, so please take action June 1, 2025 at 11:49 AM, Dániel Hufnágel : Slowly there June 1, 2025 at 11:50 AM, 조혜근 : It's been 45 minutes since the alarm occurred June 1, 2025 at 11:57 AM, Lee Junghan(이정한)_CS : Cathode Done. June 1, 2025 at 12:02 PM, Erik Gerzsenyi : Katod slitt 1-en 32 perce varjuk az AGV-t June 1, 2025 at 12:02 PM, Erik Gerzsenyi : Megnezitek legyszi? June 1, 2025 at 12:02 PM, Oláh András : Mindjárt felveszi az agv és már viszi is June 1, 2025 at 12:04 PM, Oláh András : 12es agv most indul a raktárból vele June 1, 2025 at 12:12 PM, duzzaman Md (MCS) : Could you please check E0CNVC51_08_053 Its been OOS for a while June 1, 2025 at 12:12 PM, Oláh András : Checking June 1, 2025 at 12:27 PM, duzzaman Md (MCS) : Also, Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you! June 1, 2025 at 12:27 PM, Oláh András : Checking June 1, 2025 at 1:14 PM, Koska Szilárd János : sziasztok megtudnátok nézni katód slitt 1-2 nél nemjönnek a tálcák June 1, 2025 at 1:16 PM, duzzaman Md (MCS) : This message was deleted. June 1, 2025 at 1:18 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_P06 LTC0216 is stuck there June 1, 2025 at 1:21 PM, duzzaman Md (MCS) : Moving now. It would arrive soon. June 1, 2025 at 1:21 PM, Oláh András : Yes, we solved lift problem June 1, 2025 at 2:06 PM, 조혜근 : @FA The main power of the crane of cathode roll warehouse unit 1 is out. Please check it June 1, 2025 at 2:08 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_P06 LTC0946 is stuck there June 1, 2025 at 2:17 PM, duzzaman Md (MCS) : Please check this on priority June 1, 2025 at 2:23 PM, Somoskövy Martin : Cathode Slitt 2-re nem jön tàlca. Megnéznétek? Köszönöm. June 1, 2025 at 2:25 PM, Szabadi Miki : Uton vannak volt egy kis elakadás liftnél June 1, 2025 at 2:39 PM, ~Lidiia~리디 ~ : A conveyor error occurred on cathode slot 2, please check this. June 1, 2025 at 3:04 PM, Semenszki Péter : Sziasztok! Az anód 1-re kitudnátok jönni? June 1, 2025 at 3:04 PM, Oláh András : Persze, gondolom coatingra gondoltál June 1, 2025 at 3:05 PM, Semenszki Péter : Igen köszönöm June 1, 2025 at 3:14 PM, duzzaman Md (MCS) : @FA Please check E0STKC34_P01 is OOS, job getting delayed. Thank you June 1, 2025 at 3:14 PM, Oláh András : On the way June 1, 2025 at 4:34 PM, KIM SEYEON [김세연]_FA : @FA Please check eostkc34 transfer is stopped June 1, 2025 at 4:34 PM, Oláh András : On the way June 1, 2025 at 4:34 PM, KIM SEYEON [김세연]_FA : @Oláh András June 1, 2025 at 4:35 PM, KIM SEYEON [김세연]_FA : auto step#01 timeover June 1, 2025 at 4:37 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) is there any problem at e0stkc34 about roll carrier I'd? June 1, 2025 at 4:39 PM, duzzaman Md (MCS) : In last two hours it has been In service and out of service for 22 times. Whenever AGV is its going OOS June 1, 2025 at 4:41 PM, duzzaman Md (MCS) : Its having AGV retry count exceeded error June 1, 2025 at 4:41 PM, Oláh András : @duzzaman Md (MCS) please regenerate the order for RBC3347 June 1, 2025 at 4:42 PM, Oláh András : Transfer picked up from agv and stays on transfer June 1, 2025 at 4:43 PM, duzzaman Md (MCS) : *AGV is coming ,then material deposit is okay, then agv departed, and this time AGV retry count exceeded happening and the port is going OOS June 1, 2025 at 4:44 PM, Oláh András : The roll horder stucked thats why went oos. Now transfer on service, and we need the roll transfer to machine June 1, 2025 at 4:46 PM, Oláh András : We made it manually June 1, 2025 at 4:46 PM, duzzaman Md (MCS) : Was it the same earlier ? As I've also messaged about this issue 3 times in last 3-5 hours. June 1, 2025 at 4:47 PM, Oláh András : And we all the times come here and help the agv June 1, 2025 at 4:47 PM, duzzaman Md (MCS) : Yes, job initiated. All good from MCS June 1, 2025 at 4:47 PM, Oláh András : ...... June 1, 2025 at 5:05 PM, 조혜근 : @FA AGV No. 17 on the UW side of the anode slitter unit 1 has nothing around it, but a cargo detection error is occurring. Please check it June 1, 2025 at 5:21 PM, 조혜근 : The last roll I worked on in anode press unit 3 entered the warehouse through AGV, but it is not in the warehouse in MES. Information mismatch has occurred, so please find out the cause. EA2P081F610181 June 1, 2025 at 5:22 PM, Somoskövy Martin : Cathode Slitt 2-őn a robotkarokon maradtak a reelek. Megnéznétek? Köszönöm. June 1, 2025 at 6:10 PM, VK (mcs) : This LOT belongs to RBA3435 The last information is : carrier transferred from STK A31 to the E1PRA010_P01 through AGV 11 22.April. 2025 at 9:02.10 June 1, 2025 at 6:13 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check this issue. June 1, 2025 at 6:34 PM, Farkas Tamàs : Ok June 1, 2025 at 6:42 PM, Mucsenbacher_Jozsef : Good Night . During the night shift, we plan to operate two production lines on the Anode side. I have been informed that continuous AVG supply cannot currently be ensured on the Anode side. Based on our discussion, the manual supply of AVG will be arranged for tonight to keep Anode Lines 1 and 2 running. However, starting next week, three production lines will be operating: Anode 1–2 and Cathode 2. The uninterrupted operation of these lines can only be ensured with a consistent AVG supply. June 1, 2025 at 6:57 PM, 이게리 : @KIM SEYEON [김세연]_FA the supporter members of FA continously sitting at the SL table or on the AGV playing on their phones. If this problem will be occured on the night shift, send them for support the production and do the manual transfer instead of just be there. June 1, 2025 at 6:58 PM, Baek Hojong(백호종)FA : Sorry I,m check June 1, 2025 at 7:43 PM, MUGDHO/Ivansca FA : Agv 16 failed to release the roll in front of the EOSTKC31-TR-MCP June 1, 2025 at 9:00 PM, 김대호 (Kim Dae Ho) : Please check the L/R of cathode slitting unit 1 June 1, 2025 at 9:02 PM, MUGDHO/Ivansca FA : Solved June 1, 2025 at 9:02 PM, VK (mcs) : LR received at 20:33 Carrier is in output port STK C32 and waiting for AGV. June 1, 2025 at 9:08 PM, VK (mcs) : LR received at 20:33 and Transport job started at 20:57 As I checked. The reason of delay was auto port was in alarm. June 1, 2025 at 9:11 PM, 김대호 (Kim Dae Ho) : Ok..Thank you! June 1, 2025 at 10:11 PM, Baek Hojong(백호종)FA : 06.01 night shift 18:00-06:00 Baek hojong 백호종 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 2, 2025 at 2:43 AM June 2, 2025 at 2:43 AM, 임동현 : Please check the error in the Cathode roll warehouse #2 June 2, 2025 at 2:43 AM, Viczai Tamás : Megyünk June 2, 2025 at 6:13 AM, Viktoriia Hleba : Sziasztok. 82 perce slitt 3-ra anode nem hoz a robot anyagot. June 2, 2025 at 6:16 AM, Csicskovics Balázs : Nincs a raktárban elérhető anyag! June 2, 2025 at 6:16 AM, duzzaman Md (MCS) : Yes, no Lot available June 2, 2025 at 6:21 AM, duzzaman Md (MCS) : @FA Please check E0STKC32_C01 there is SCP main power CP trip error. Thank you! June 2, 2025 at 6:21 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.02. "B" műszak, 9+1+1/12+1 Tech, 1Sl Overtime(1): Kiss Balázs Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(3): Takács Ádám, Denkó János, Böröcz Tamás Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(1): Boromisza Z June 2, 2025 at 6:22 AM, Szücs Géza FT-B : @Kiss Balázs F.A. légyszives June 2, 2025 at 6:29 AM, Kiss Balázs F.A. : Nézem June 2, 2025 at 6:31 AM, duzzaman Md (MCS) : Please check E0STKA31 too. Same error June 2, 2025 at 6:31 AM, Kiss Balázs F.A. : Solved June 2, 2025 at 6:57 AM, 조혜근 : @KIM SEYEON [김세연]_FA @김건희 음극 슬리터 1호기 UW쪽 설비와 기둥 사이에 AGV가 지나갈때마다 화물 감지 에러 지속 발생중인데 재발생 안되게 조치 부탁드립니다. A cargo detection error continues to occur whenever an AGV passes between the UW side equipment and the pillar of the No. 1 cathode slitter. Please take action to prevent this from happening again. June 2, 2025 at 6:57 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 2, 2025 at 6:58 AM, 조혜근 : 안녕하세요 PM님 최근 AGV가 해당 구역 지나갈때마다 화물 감지로 에러 발생하면서 멈춰있는 경우가 빈번하게 일어나고있는데 확인 부탁드립니다! June 2, 2025 at 6:58 AM, 조혜근 : 감사합니다! June 2, 2025 at 7:10 AM, Viktoriia Hleba : 33 perc - nincs Agv 3 slitter anode . June 2, 2025 at 7:11 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 2, 2025 at 7:14 AM, duzzaman Md (MCS) : AGV 18 on the way June 2, 2025 at 7:19 AM, Viktor Vadas : Sziasztok! Ma Anod 2 termel es Katod 2 termel, mindket soron hasznalunk AGV-t! June 2, 2025 at 7:23 AM, Viktor Vadas : Sziasztok! 1-es Folia raktarhoz kernenk egy ujrainditast! Koszonom! June 2, 2025 at 7:23 AM, Kiss Balázs F.A. : Megyünk June 2, 2025 at 7:24 AM, 조혜근 : EA2P081F610211 / RBA3596 I just entered the warehouse on AGV after the press, but MES says it's not in the warehouse. Can you check it? June 2, 2025 at 7:26 AM, 조혜근 : It's a roll that ended in anode press unit 3 June 2, 2025 at 7:32 AM, Kiss Balázs F.A. : Kész mindkettő June 2, 2025 at 7:43 AM, duzzaman Md (MCS) : Good morning ! From MCS/RTD side, no issue has been found for this carrier RBA3596 June 2, 2025 at 7:50 AM, 조혜근 : Thank you for checking. I think the information was updated a little late June 2, 2025 at 8:47 AM, ~Lidiia~리디 ~ : @FA Hello, on the anode side, the conveyor line gives an error. Please check this. Thank you! June 2, 2025 at 8:49 AM, Viktoriia Hleba : 5 slitter anode convejor stop. Kérem, nézze meg! June 2, 2025 at 8:49 AM, Rácz Dániel / FA : Jövünk June 2, 2025 at 8:55 AM, Rácz Dániel / FA : Solved June 2, 2025 at 8:55 AM, Czeilinger Krisztián : Kész. June 2, 2025 at 8:57 AM, Nagy Dávid 4 : anód slitt 3-ra, conveyor sípol. Nézzétek meg légyszíves help help köszönöm szépen June 2, 2025 at 9:23 AM, 조혜근 : @FA There was an error in the number of AGV retries in cathode roll warehouse unit 4. Please check it June 2, 2025 at 9:36 AM, Pálosi Róbert : Ok June 2, 2025 at 9:57 AM, Anton Mashchenko : Hello, cathode press 4, AGV not coming 10 min! Help! Thanks! June 2, 2025 at 9:59 AM, duzzaman Md (MCS) : AGV 21 is assigned . You'll receive it soon June 2, 2025 at 10:01 AM, duzzaman Md (MCS) : The port is going going in service and out of service frequently which is causing the delay. @FA PLEASE CHECK E0STK034_P01 June 2, 2025 at 10:02 AM, Czeilinger Krisztián : The request is there, but I don't see it in the order. June 2, 2025 at 10:04 AM, Czeilinger Krisztián : Press the request again. June 2, 2025 at 10:10 AM, duzzaman Md (MCS) : Thers active job for E1PRC040_P01 from E0STKC34 CARRIER RBC3425 However, at 10:08 the job is cancelled by the operator June 2, 2025 at 10:17 AM, Czeilinger Krisztián : AGV 21 does not bring the material into the warehouse (E0STKC34) AGV 21 does not either. June 2, 2025 at 10:18 AM, Czeilinger Krisztián : Another AGV should be sent here because AGV 21 cannot remove the roll. June 2, 2025 at 10:19 AM, Viktoriia Hleba : 2 slitter anode convejor stop. Please check June 2, 2025 at 10:22 AM, Anton Mashchenko : AGV never arrived.. June 2, 2025 at 10:24 AM, Nagy Dávid 4 : Anod slitt 1-nél 11 agv kiált hibára help help köszönöm szépen June 2, 2025 at 10:25 AM, Kiss Balázs F.A. : Okey June 2, 2025 at 10:26 AM, Viktoriia Hleba : This message was deleted. June 2, 2025 at 10:45 AM, Anton Mashchenko : ??? June 2, 2025 at 10:46 AM, Viktor Vadas : Sziasztok! Katod 2on a 2es rewindernel megallt az AGV, az ujrainditashoz kernenk segitseget! June 2, 2025 at 10:46 AM, Viktor Vadas : Koszonom! June 2, 2025 at 10:46 AM, Czeilinger Krisztián : Megyek June 2, 2025 at 10:49 AM, duzzaman Md (MCS) : Press LR please, as the previous job was cancelled by operator June 2, 2025 at 10:50 AM, Anton Mashchenko : Just updated the order June 2, 2025 at 10:50 AM, duzzaman Md (MCS) : Not received June 2, 2025 at 10:51 AM, Anton Mashchenko : Well I don't know what's wrong, I just pressed it again LR June 2, 2025 at 10:53 AM, Czeilinger Krisztián : Kész June 2, 2025 at 11:02 AM, Viktoriia Hleba : anode press 3 nincs AGV - 20 perc June 2, 2025 at 11:02 AM, 조혜근 : I pressed the LR of the cathode press unit 4 UW again. Please check if there is a signal June 2, 2025 at 11:05 AM, Rácz Dániel / FA : A #15 AGV már úton van a jumbo roll-al June 2, 2025 at 11:09 AM, duzzaman Md (MCS) : There's active job. Giving you more info soon June 2, 2025 at 11:12 AM, Anton Mashchenko : Pls, come to anode press 3, AGV 15 error! Thanks! June 2, 2025 at 11:12 AM, Rácz Dániel / FA : Jövök June 2, 2025 at 11:15 AM, duzzaman Md (MCS) : VC 07 will will deliver it. After the vehicle started acquiring the material, IPS Sensor reading failed occured on E0STKC32_P01 and after that again Auto select abnormal error. This is ACS issue. Also, Please dont delete jobs. June 2, 2025 at 11:16 AM, Rácz Dániel / FA : Kész June 2, 2025 at 11:17 AM, Viktoriia Hleba : Slitter anode 5. Convejor stop. Please check June 2, 2025 at 11:17 AM, Viktoriia Hleba : 4-5 slitter June 2, 2025 at 11:17 AM, Rácz Dániel / FA : Nézem June 2, 2025 at 11:24 AM, Rácz Dániel / FA : Kész, megint az LTA0066-os reel tálca szorult meg, ugyan ott. [06_013] CV_114 June 2, 2025 at 11:31 AM, 조혜근 : The cathode roll warehouse unit 4 RBC3425/RBC3434 is waiting, so please check if AGV is coming June 2, 2025 at 11:33 AM, Dana Honak : 1 slitt Cathode 15 perc ninc AGV June 2, 2025 at 11:34 AM, Czeilinger Krisztián : Monitoring. June 2, 2025 at 11:36 AM, duzzaman Md (MCS) : RBC3425 Tranfer was cancelled by operator at 10:08 RBC3434 E0STKC34_P01_BP01 its OOS. June 2, 2025 at 11:36 AM, 조혜근 : Please solve it quickly June 2, 2025 at 11:37 AM, 조혜근 : Please move RBC3425 to another place June 2, 2025 at 11:37 AM, 조혜근 : We need to produce Hyundai products quickly because we don't have enough supplies, but the facilities are stopping due to this problem June 2, 2025 at 11:38 AM, 조혜근 : Yesterday, the same phenomenon occurred in cathode roll warehouse No. 4 June 2, 2025 at 11:39 AM, Anton Mashchenko : Cathode press 4, AGV not coming again.. Help! June 2, 2025 at 11:40 AM, 조혜근 : @KIM SEYEON [김세연]_FA @김건희 안녕하세요 PM님 지금 현대 제품 물량이 없어서 빠르게 생산해야하는데 양극 롤창고 4호기의 배당된 신호가 끊겨서 롤이 움직이지 못하고 롤이 설비로 못오고있습니다. 현재 약 1시간 넘게 지체되고있습니다. 확인 부탁드립니다. June 2, 2025 at 11:41 AM, Czeilinger Krisztián : On the electrode cathode side, restarting the AGV network solved the AGVs' starting. June 2, 2025 at 11:42 AM, Sazzad Bhai SKon : Transferring back to STK June 2, 2025 at 11:44 AM, Rácz Dániel / FA : Újraindítottuk a falon lévő antennákat az AGV-k még sem indultak el. Segítségre lenne szükségünk. June 2, 2025 at 11:45 AM, duzzaman Md (MCS) : Could you please update the current physical location of RBC3425 June 2, 2025 at 11:48 AM, 조혜근 : It exists in E0STKC34_P01 June 2, 2025 at 11:48 AM, 김건희 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 10시 8분 부터 지금까지 버퍼에 Roll이 미도착 상태입니다. 저도 현장인데 현장에 조치인원 아무도 안 계십니다. 전극 조립 Reel재고 0수준이여서 곧 조립에 연락 올 거 같습니다 빠른 도움 요청드립니다. June 2, 2025 at 11:51 AM, Rácz Dániel / FA : Úgy nézz ki elindultak June 2, 2025 at 11:55 AM, duzzaman Md (MCS) : Now, its going to SL CA P01 June 2, 2025 at 11:58 AM, Rácz Dániel / FA : @duzzaman Md (MCS) I send AGV #13 to SL Ca P01 RBC3425 matching the slitt ca 1 P01 material ? June 2, 2025 at 12:00 PM, 조혜근 : RBC3425 should be sent to the press June 2, 2025 at 12:00 PM, 조혜근 : I'm waiting for the roll in Press Unit 4 June 2, 2025 at 12:04 PM, Sazzad Bhai SKon : It's on the way for 1 line slitter June 2, 2025 at 12:05 PM, Sazzad Bhai SKon : This was a manual job created by someone. June 2, 2025 at 12:05 PM, Rácz Dániel / FA : This message was deleted. June 2, 2025 at 12:05 PM, Lee Junghan(이정한)_CS : 프레스#4 P01로 보냈습니다 June 2, 2025 at 12:06 PM, Lee Junghan(이정한)_CS : 이동중입니다 June 2, 2025 at 12:06 PM, Csicskovics Balázs : @Rácz Dániel / FA Cathode slitt 1 AGV kérés újra indítva! June 2, 2025 at 12:08 PM, Rácz Dániel / FA : 9es AGV fogja vinni RBC3393 June 2, 2025 at 12:08 PM, Rácz Dániel / FA : I created it June 2, 2025 at 12:11 PM, Nagy Dávid 4 : Anod press 2-es gép mögött a 19 számú agv kiált hibára help help köszönöm szépen June 2, 2025 at 12:11 PM, Rácz Dániel / FA : Jövök June 2, 2025 at 12:12 PM, Lee Junghan(이정한)_CS : @조혜근 PRESS#4 UW RBC3425 Loading 완료했습니다. June 2, 2025 at 12:13 PM, 조혜근 : 네 확인 감사합니다 June 2, 2025 at 12:16 PM, Rácz Dániel / FA : Thank you for the helping ! ✌️ June 2, 2025 at 1:09 PM, duzzaman Md (MCS) : @FA Please check E0STKC34_P01 is OOS, AGV RETRY COUNT EXCEEDED Thank you June 2, 2025 at 1:11 PM, Nagy Dávid 4 : Anod press 4-es gép mögött a 25 számú agv kiált hibára help help köszönöm szépen June 2, 2025 at 1:56 PM, duzzaman Md (MCS) : Also, Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you! June 2, 2025 at 2:39 PM, Dana Honak : Cathode slitt 3 r/w robot problema . June 2, 2025 at 2:40 PM, Rácz Dániel / FA : Jövök June 2, 2025 at 2:49 PM, Viktoriia Hleba : Anode press 3 - Agv u/w stop. June 2, 2025 at 2:53 PM, Viktoriia Hleba : Please check June 2, 2025 at 2:55 PM, Viktoriia Hleba : Anode press 3 , nincs Agv - 20 perc . June 2, 2025 at 2:57 PM, Viktoriia Hleba : anode slitt 2 nincs Agv- 20 perc . June 2, 2025 at 3:02 PM, duzzaman Md (MCS) : ACS issue. VC 08 is assigned. @ACS PLEASE CHECK June 2, 2025 at 3:05 PM, duzzaman Md (MCS) : VC 15 departed for it already June 2, 2025 at 3:06 PM, Rácz Dániel / FA : Jövök June 2, 2025 at 3:07 PM, Rácz Dániel / FA : Kész June 2, 2025 at 3:18 PM, Viktoriia Hleba : anode slitt 1 nincs Agv- 15 perc June 2, 2025 at 3:23 PM, Rácz Dániel / FA : @duzzaman Md (MCS) please check June 2, 2025 at 3:24 PM, Csicskovics Balázs : Sziasztok Cathode reel raktárnál a 9 és 10-es port is hibába áll. Nézzétek meg légyszíves Köszönöm June 2, 2025 at 3:26 PM, duzzaman Md (MCS) : There's active job and it will be executed. June 2, 2025 at 3:38 PM, Viktoriia Hleba : 35 perc - nincs Agv - 1 slitter anode June 2, 2025 at 3:41 PM, Szücs Géza FT-B : megnézik, de nem ebbe q csopiba való a bejegyzés. June 2, 2025 at 3:42 PM, Csicskovics Balázs : Jelenleg 1 fő operátor ott dolgozik innen az elektródáról. Azért ebbe a csoportba írtam! June 2, 2025 at 3:43 PM, duzzaman Md (MCS) : VC19 will deliver it June 2, 2025 at 3:44 PM, Szücs Géza FT-B : Értem, csak aki reagálna rá az másik csoportban van June 2, 2025 at 3:57 PM, Rácz Dániel / FA : EL GF AN AGV #8 a 3294-es node ponton megáll “POS CONT ERROR”-al. June 2, 2025 at 4:43 PM, Csicskovics Balázs : @Szücs Géza FT-B megkérlek megnéznétek a 9-es 10-es portot. Valamiért nem tudjuk visszaküldeni a Reeleket. June 2, 2025 at 4:44 PM, Csanálosi Gábor FA : C51? June 2, 2025 at 4:47 PM, Csicskovics Balázs : Igen June 2, 2025 at 4:47 PM, Csanálosi Gábor FA : Jövök June 2, 2025 at 4:47 PM, Csicskovics Balázs : Köszönöm June 2, 2025 at 4:51 PM, Csanálosi Gábor FA : Visszaküldtem a raktárba. June 2, 2025 at 4:52 PM, Csicskovics Balázs : Köszönöm June 2, 2025 at 5:07 PM, Viktoriia Hleba : 1 slitter anode nincs Agv - 15 perc June 2, 2025 at 5:10 PM, Rácz Dániel / FA : @duzzaman Md (MCS) please check June 2, 2025 at 5:10 PM, duzzaman Md (MCS) : No available material June 2, 2025 at 5:13 PM, Csanálosi Gábor FA : @Fa Cnvc51 elakadás June 2, 2025 at 5:14 PM, Dana Honak : Cathode slitt 3 r/w robot problema . June 2, 2025 at 5:16 PM, Rácz Dániel / FA : Itt vagyunk June 2, 2025 at 5:23 PM, Rácz Dániel / FA : Sopved June 2, 2025 at 5:23 PM, Rácz Dániel / FA : Kész June 2, 2025 at 5:55 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.02 Time: 18:00-06:00 1. Ji Seok Beom June 2, 2025 at 6:00 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 2, 2025 at 6:03 PM, KIM SEYEON [김세연]_FA : 참고부탁드립니다 @조혜근 @김건희 June 2, 2025 at 6:03 PM, KIM SEYEON [김세연]_FA : Photo June 2, 2025 at 6:13 PM, 조성준/samkoo/공정-FA : E0STKA33 warehouse error E0STKC34 warehouse error Please take action! June 2, 2025 at 6:16 PM, 김대호 (Kim Dae Ho) : Anode press 3 Please check the R/W U/R signal. June 2, 2025 at 6:19 PM, VK (mcs) : Last UR received at 17:30 but transfer job was canceled by OP action. June 2, 2025 at 6:20 PM, 김대호 (Kim Dae Ho) : So what should I do? The roll is up in the buffer. June 2, 2025 at 6:21 PM, VK (mcs) : Please apply UR again June 2, 2025 at 6:22 PM, 김대호 (Kim Dae Ho) : If you go up to the buffer, it will be treated as out of the facility. June 2, 2025 at 6:23 PM, 지찬우 : Anode press 3 RW agv coming?? June 2, 2025 at 6:24 PM, 임동현 : Please check the error in the Cathode roll warehouse #4 June 2, 2025 at 6:24 PM, Szeitz Flórián : Egyenlőre mèg az AGV se állt be allá. June 2, 2025 at 6:27 PM, 김대호 (Kim Dae Ho) : 음극 프레스 3호기 버퍼에 올라간 상태로 대기중 입니다. 현대 재고 부족한 상황인데 지원인력 부탁드립니다. @김건희 @지석범PM (이반차FA) June 2, 2025 at 6:27 PM, 지석범PM (이반차FA) : 지금 바로 가겠습니다. June 2, 2025 at 6:38 PM, Szeitz Flórián : Sziasztok! Anód slitt 3 -rol nem visszi a robot a a Reel-t. Légyszives Gyertek köszönöm June 2, 2025 at 6:45 PM, adambenczik : Kész June 2, 2025 at 6:48 PM, Mr.Miti (미티) FA : Nagyon jó vagy June 2, 2025 at 6:55 PM, 조혜근 : 확인 감사합니다 PM님! 하지만 저희가 확인 했을때는 주변에 아무런 화물이나 이물이 없었습니다. 같은 현상이 추가로 발생하면 현장 보존하여 다시 연락 드리거나 AGV의 번호를 기록해놓겠습니다! 수고하세요!! June 2, 2025 at 6:56 PM, 김대호 (Kim Dae Ho) : 야간에 모니터링 후 재발생시 공유드리겠습니다. June 2, 2025 at 6:57 PM, 김대호 (Kim Dae Ho) : @지찬우 @임동현 June 2, 2025 at 7:06 PM, 김대호 (Kim Dae Ho) : Cathode sliter 3 Please check the runtime over error. @Fa June 2, 2025 at 7:07 PM, adambenczik : Coming June 2, 2025 at 7:11 PM, adambenczik : Solved June 2, 2025 at 7:13 PM, 김대호 (Kim Dae Ho) : Cathode sliter 3 Please check the runtime over error. @Fa June 2, 2025 at 7:20 PM, adambenczik : Solved June 2, 2025 at 7:21 PM, Szeitz Flórián invited Malyshev. June 2, 2025 at 7:34 PM, 임동현 : Cathode sliter 3 Please check the L/R June 2, 2025 at 7:37 PM, VK (mcs) : LR received at 19:25 Carrier is on AGV 12 and on the way. June 2, 2025 at 7:38 PM, VK (mcs) : @FA Please check Cathode Roll STK C35 MCP control power CP trip. June 2, 2025 at 7:38 PM, adambenczik : Checking June 2, 2025 at 7:42 PM, adambenczik : Solved June 2, 2025 at 7:43 PM, Szeitz Flórián : Sziasztok! C51. 10es portnàl lévő Reel-t nem akar vissza menni . Légyszives nézzétek meg. Köszönöm June 2, 2025 at 8:49 PM, Oleksii Krasnoshchok : Hello in anode press 3 problem with Agv U/W June 2, 2025 at 8:57 PM, gutenkunstabelzoltan : Kész June 2, 2025 at 9:07 PM, Szeitz Flórián invited Kovács Péter. June 2, 2025 at 9:15 PM, KIM SEYEON [김세연]_FA : 네 호기 알려주시면 더 좋습니다. 야간에 보시고 알려주세요. 수고하십시오. June 2, 2025 at 9:55 PM, 김대호 (Kim Dae Ho) : 네 알겠습니다. June 2, 2025 at 10:06 PM, 김대호 (Kim Dae Ho) : Cathode 2f 컨베이어 릴 무언정지 발생 확인 부탁드립니다. 위치는 양극 슬리팅 4호기입니다. Cathode 2f conveyor reel silent stop Please check. The location is the positive slitting unit 4. June 2, 2025 at 10:07 PM, 김대호 (Kim Dae Ho) : Alarm is now June 2, 2025 at 10:09 PM, 김대호 (Kim Dae Ho) : @Fa Please check June 2, 2025 at 10:10 PM, Mr.Miti (미티) FA : Okay June 2, 2025 at 10:17 PM, 김대호 (Kim Dae Ho) : When will you be here? June 2, 2025 at 10:18 PM, Mr.Miti (미티) FA : A Minute June 2, 2025 at 10:29 PM, 임동현 : Cathode sliter 3 Please check the error June 2, 2025 at 10:30 PM, Karina Lyzanets : Convejor megállt Slitt Cathode 3 mögött June 2, 2025 at 10:32 PM, Mr.Miti (미티) FA : @gutenkunstabelzoltan nézd meg légyszíves June 2, 2025 at 10:32 PM, Karina Lyzanets : Köszönöm szépen June 2, 2025 at 10:33 PM, Mr.Miti (미티) FA : Koszike June 2, 2025 at 10:35 PM, gutenkunstabelzoltan : Elvileg jo is! June 2, 2025 at 10:35 PM, gutenkunstabelzoltan : Nemnem June 2, 2025 at 10:42 PM, gutenkunstabelzoltan : Daruval megy a matek uh felfog torlodni a cat con June 2, 2025 at 10:43 PM, Mr.Miti (미티) FA : Mi a matek tárgya ? June 2, 2025 at 10:43 PM, gutenkunstabelzoltan : Sopi meg imi elvileg mar megis oldotta June 2, 2025 at 10:53 PM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8053)(8054) Run time over. June 3, 2025 at 12:03 AM June 3, 2025 at 12:03 AM, Oleksii Krasnoshchok : Anode press 3 u/w problem with Agv June 3, 2025 at 12:07 AM, 김대호 (Kim Dae Ho) : @Fa June 3, 2025 at 12:08 AM, Mr.Miti (미티) FA : Okay June 3, 2025 at 12:26 AM, Oleksii Krasnoshchok : Same June 3, 2025 at 12:28 AM, Karina Lyzanets : Convejor pálya megállt Slitter Cathode 1-2 mögött Gyertek nézzetek meg légyszíves June 3, 2025 at 12:28 AM, Karina Lyzanets : Köszönöm szépen June 3, 2025 at 12:32 AM, Karina Lyzanets : 🆘 June 3, 2025 at 12:37 AM, 지찬우 : Cathode slitt 1.2 The equipment will be out of operation due to a conveyor problem. Please take action June 3, 2025 at 12:38 AM, Szeitz Flórián : Sziasztok ! Anód Press 3 U/W-re egy AGV nem tud beállni a portra, de már itt a következő roll is ugyan ide. June 3, 2025 at 12:39 AM, Faisal / Ivancsa FA : Need help at Cathode line 2 rewinder 2 June 3, 2025 at 12:41 AM, 최재균 : @KIM SEYEON [김세연]_FA 전극 코팅 양극 2 라인 세컨 리와인더 이재기 위치가 벗어나서 문제가 발생하고 있습니다. June 3, 2025 at 12:41 AM, 김대호 (Kim Dae Ho) : 현장에 Fa가 한명도 없습니다. 확인 해주실수있나요? @지석범PM (이반차FA) June 3, 2025 at 12:41 AM, 지석범PM (이반차FA) : 바로 가겠습니다 June 3, 2025 at 12:42 AM, 조성준/samkoo/공정-FA : 저 갑니다 June 3, 2025 at 12:43 AM, 최재균 : 이재기 관련해서 야간에 도와주실수 있는 분들 안계신가요 ? 설비 멈춰야 합니다. June 3, 2025 at 12:43 AM, Szeitz Flórián : C51 . 10-es porton lévő reel nem megy vissza . MES -ben full . Nem hold státusz. Légyszives nézzétek meg. Köszönöm 9es porton se visszi vissza , viszont ott a MES -be empty -empty. June 3, 2025 at 12:47 AM, 조성준/samkoo/공정-FA : 원점 잡았습니다 시간 안되서 롤은 수동 배출 진행했습니다 June 3, 2025 at 12:50 AM, 김대호 (Kim Dae Ho) : 양극 슬리팅 컨베이어 문제와, 2nd측 릴 공트레이에 넣는 동작중 공트레이 떨어졌습니다 June 3, 2025 at 12:54 AM, 조성준/samkoo/공정-FA : bipolar warehouse E0STKC34 error Requesting backup! June 3, 2025 at 1:27 AM, 임동현 : Cathode slitt The equipment will be out of operation due to a conveyor problem. Please take action June 3, 2025 at 1:31 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8004) Run time over. June 3, 2025 at 1:32 AM, 지찬우 : Cathode slitt 2 U/W LR Check please June 3, 2025 at 1:34 AM, VK (mcs) : Carrier is on the AGV 13 and on the way June 3, 2025 at 1:36 AM, Oleksii Krasnoshchok : In anode press 3 u/w transfer stopped June 3, 2025 at 2:38 AM, Faisal / Ivancsa FA invited (Unknown). June 3, 2025 at 2:39 AM, Faisal / Ivancsa FA invited Kaniz / Ivancsa FA. June 3, 2025 at 3:17 AM, Karina Lyzanets : Cathode Slitter 3 nincs AGV 25 perc June 3, 2025 at 3:17 AM, gutenkunstabelzoltan : Nezem June 3, 2025 at 3:17 AM, Karina Lyzanets : Köszi June 3, 2025 at 3:19 AM, gutenkunstabelzoltan : Elindult! June 3, 2025 at 3:22 AM, 김대호 (Kim Dae Ho) : Cathode sliter 3 Please check the L/R @VK (mcs) June 3, 2025 at 3:23 AM, VK (mcs) : AGV 21 is on the way June 3, 2025 at 3:23 AM, 김대호 (Kim Dae Ho) : Thank you Is there a reason for the delay? June 3, 2025 at 3:24 AM, VK (mcs) : Checking June 3, 2025 at 3:24 AM, gutenkunstabelzoltan : Agvs are often blocking the way of other agvs… June 3, 2025 at 3:25 AM, 김대호 (Kim Dae Ho) : Thank you for your response. June 3, 2025 at 3:29 AM, VK (mcs) : LR received at 2:39 Transport job started at 2:41 AGV arrived at 2:50 Alarm occurred and STK port went to out of service. At 3:16 AGV departed. June 3, 2025 at 3:30 AM, gutenkunstabelzoltan : At the press3 node 3294 agvs are geting a pos con or pos heading errorr ( different agvs same problem) all night! June 3, 2025 at 3:39 AM, 임동현 : Please check the error in the Cathode roll warehouse #2 June 3, 2025 at 3:41 AM, 김대호 (Kim Dae Ho) : 음극프레스 3호기 U/W측 지속적으로 해당 에러 발생중 입니다. 현지 FA분들이 대응중이나, 점검 부탁드립니다. @지석범PM (이반차FA) June 3, 2025 at 3:42 AM, 지석범PM (이반차FA) : 확인하겠습니다 June 3, 2025 at 3:44 AM, 김대호 (Kim Dae Ho) : 감사합니다. June 3, 2025 at 4:36 AM, 지찬우 : Agv 12 stopped near Cathode Press 4 R/W. Please check June 3, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.03. "B" műszak, 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(2): Denkó János, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Böröcz Tamás Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, G June 3, 2025 at 6:10 AM, Viktor Vadas : Sziasztok! Coatingon Katod 2, Anod 2 termel, mindket sorra hasznalunk AGV-ket June 3, 2025 at 6:30 AM, Shakir (MCS) : @FA Please check E0STKC32_C01 there is SCP main power CP trip error. Thank you! June 3, 2025 at 6:36 AM, Czeilinger Krisztián : A hiba nincs jelen,daru üzemben. June 3, 2025 at 7:24 AM, Nagy Dávid 4 : Anod press 4 U/W 15 számú agv kiált hibára help help köszönöm szépen June 3, 2025 at 7:25 AM, Czeilinger Krisztián : Megyünk. June 3, 2025 at 7:43 AM, Nagy Dávid 4 : Katod reel raktárhoz kérnék szépen segítséget köszönöm szépen June 3, 2025 at 7:44 AM, Rácz Dániel / FA : Jövök June 3, 2025 at 7:47 AM, Rácz Dániel / FA : Az RTD jelszó ellett rontva, ebben kellene segítség, köszi. June 3, 2025 at 7:50 AM, Nagy Dávid 4 : Szólj légyszíves Gézának hogy orvosolják a problémát köszönöm szépen June 3, 2025 at 7:50 AM, Rácz Dániel / FA : @Shakir (MCS) the RTD ‘TEMP’ username please reset the default password, thank you. June 3, 2025 at 7:52 AM, Shakir (MCS) : Done, Password Initiated. Thank you June 3, 2025 at 7:52 AM, Rácz Dániel / FA : Thank you June 3, 2025 at 7:57 AM, Rácz Dániel / FA : No good 🥲 June 3, 2025 at 7:58 AM, Shakir (MCS) : Please use 1234 then reset your password, I initiated again. Thank you June 3, 2025 at 8:00 AM, Rácz Dániel / FA : It works, thank you ! 🙏 June 3, 2025 at 8:01 AM, Rácz Dániel / FA : Működik 🫡 June 3, 2025 at 8:07 AM, Nagy Dávid 4 : Nagyon szépen köszönöm (inlove) June 3, 2025 at 8:52 AM, waseem/ Iváncsa Fa : @FA technician can come in anode press 2 June 3, 2025 at 8:53 AM, waseem/ Iváncsa Fa : Solve June 3, 2025 at 9:03 AM, waseem/ Iváncsa Fa : Cathode line 2 is Stop due to mixing material June 3, 2025 at 9:47 AM, Nagy Dávid 4 : Anod slitt 1-hez kérnék szépen segítséget help help köszönöm szépen June 3, 2025 at 9:48 AM, Rácz Dániel / FA : Jövünk June 3, 2025 at 9:55 AM, Nagy Dávid 4 : Anod press 4 U/W az agv kiált hibára most a 7 számú help help köszönöm szépen June 3, 2025 at 9:55 AM, Rácz Dániel / FA : Jövök June 3, 2025 at 10:39 AM, Rácz Dániel / FA : @Csicskovics Balázs @Nagy Dávid 4 AN Slitt #1-2 manual car mode bekapcsolva, UW-RW lekapcsolva. CA Slitt #1-2 manual car mode bekapcsolva, UW-RW lekapcsolva. June 3, 2025 at 10:45 AM, Csicskovics Balázs : Köszönjük June 3, 2025 at 11:37 AM, Nagy Dávid 4 : Anod reel raktárhoz kérnék szépen segítséget nem megy vissza a tálca help help köszönöm szépen June 3, 2025 at 12:10 PM, Csanálosi Gábor FA : Ez még aktuális? 9-10 port? June 3, 2025 at 12:11 PM, Nagy Dávid 4 : Igen sajnos June 3, 2025 at 12:11 PM, Csanálosi Gábor FA : Intézem June 3, 2025 at 12:11 PM, Nagy Dávid 4 : Köszönöm szépen June 3, 2025 at 12:12 PM, Csanálosi Gábor FA : Kész is, már viszi June 3, 2025 at 2:18 PM, Nagy Dávid 4 : Anod slitt 3 robot probléma help help köszönöm szépen June 3, 2025 at 2:33 PM, Nagy Dávid 4 : Help help ?????????? June 3, 2025 at 2:35 PM, Csicskovics Balázs : This message was deleted. June 3, 2025 at 2:35 PM, Shakir (MCS) : @FA Please check E0CNVA51_6183/6184, PIO T01 Time over. Thank you June 3, 2025 at 2:40 PM, Rácz Dániel / FA : Jövök June 3, 2025 at 2:40 PM, Rácz Dániel / FA : Úton June 3, 2025 at 2:47 PM, Rácz Dániel / FA : Már megy June 3, 2025 at 3:02 PM, 최기수(GI SU CHOI) : . June 3, 2025 at 3:29 PM, Nagy Dávid 4 : Anod press 4 problem u/w AGV help help köszönöm szépen June 3, 2025 at 3:31 PM, Shakir (MCS) : @FA Check AGV01, POS cont heading err June 3, 2025 at 3:37 PM, FACS_Wooseok Choi : No matter which direction heading now. It don't enter in the port. June 3, 2025 at 3:44 PM, Shakir (MCS) : I have cancelled the AGV01 Job and job assigned to STK. Please reset the AGV01 , Under alarm @FA June 3, 2025 at 3:45 PM, Shakir (MCS) : AGV15 on the way to Press4 Thank you June 3, 2025 at 3:46 PM, Anton Mashchenko : Come to cathode press 4, R/W robot error! Help! June 3, 2025 at 3:48 PM, FACS_Wooseok Choi : Thank you and i check a agv15. June 3, 2025 at 5:11 PM, Anton Mashchenko : Cathode press 4, R/W robot again error.. Help! Thanks! June 3, 2025 at 5:13 PM, Czeilinger Krisztián : Megyek. June 3, 2025 at 5:48 PM, Mohammad Amir : @FA Please check E0STK002_C01 there is MCP Control Power CP Trip error. Thank you very much! June 3, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:04 PM, Mohammad Amir : @adambenczik please check this error still exists. Thank you! June 3, 2025 at 6:04 PM, Mr.Miti (미티) FA : Checking! June 3, 2025 at 6:09 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.03 Time: 18:00-06:00 1. Ji Seok Beom June 3, 2025 at 6:09 PM, Vörös Geri : Sziasztok.katód press 4 R/W nél a leszedő kar megált.Megnéznétek?köszi June 3, 2025 at 6:10 PM, Mr.Miti (미티) FA : Igen pillanat June 3, 2025 at 6:20 PM, 김대호 (Kim Dae Ho) : Anode press 1 U/W Please check the AGV retry error. June 3, 2025 at 6:21 PM, Skwarek Tibor : Checking June 3, 2025 at 6:24 PM, Skwarek Tibor : Done June 3, 2025 at 6:27 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STKA32_P01(3017) there is an SCS error "3017 Port Input H/S off" that's why job for RBA3835 is pending. Thank you very much! June 3, 2025 at 6:32 PM, Skwarek Tibor : Checking June 3, 2025 at 6:35 PM, Skwarek Tibor : Done June 3, 2025 at 6:35 PM, Mohammad Amir : Thank you very much. June 3, 2025 at 6:36 PM, Skwarek Tibor : You re welcome June 3, 2025 at 7:30 PM, 조성준/samkoo/공정-FA : This message was deleted. June 3, 2025 at 7:31 PM, 조성준/samkoo/공정-FA : FA Please respond to E0STCC32. servo down June 3, 2025 at 7:44 PM, adambenczik : Working on it June 3, 2025 at 7:45 PM, adambenczik : Solved June 3, 2025 at 8:48 PM, Mohammad Amir : @Skwarek Tibor @FA Please check E0STK001_C01 there is Material Loosening (Right). Thank you very much! June 3, 2025 at 8:58 PM, Oleksii Krasnoshchok : Anode press 4 long time waiting Agv u/w June 3, 2025 at 8:59 PM, Mohammad Amir : Checking June 3, 2025 at 9:04 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STK033_C01 it is inactive without errors and that's why there is delay for tranfer to Anode Press-4. Thank you very much! June 3, 2025 at 9:07 PM, Skwarek Tibor : Checking June 3, 2025 at 9:10 PM, 지찬우 : Anode press1 U/W LR check please June 3, 2025 at 9:10 PM, Mohammad Amir : Checking June 3, 2025 at 9:12 PM, Mohammad Amir : Sir LR received and Job successfully created at 19:34. ✅ However currently there is RBA3839 located at E0STKA33(3008) it is not moving because E0STKA32_C01 is inactive that's why transfer for Press-1 is also delayed. I already informed FA team member to check STKA033_C01. Thank you very much! June 3, 2025 at 9:17 PM, Skwarek Tibor : The crane is working, just had an imput at this moment. June 3, 2025 at 9:19 PM, Mohammad Amir : Please after carrier RBA3839 will go inside STKA033. Please change the direction to OUT way, currently it is IN way. There is two jobs RBA2893 and RBA3837 waiting for Anode Press -1&4. Thank you very much! June 3, 2025 at 9:24 PM, Skwarek Tibor : Material is out now. June 3, 2025 at 9:24 PM, Mohammad Amir : @Oleksii Krasnoshchok @지찬우 Update :- Issue with STKA033 has been resolved ✅. And now jobs has started to progress for Anode Press-1 and Press-4. For Press-1 ,AGV#8 has been assigned. Thank you very much! June 3, 2025 at 9:24 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 9:25 PM, Skwarek Tibor : Youre welcome. June 3, 2025 at 9:25 PM, 지찬우 : Thank you June 3, 2025 at 9:25 PM, Mohammad Amir : You are welcome! June 3, 2025 at 9:32 PM, 김대호 (Kim Dae Ho) : 양극 프레스 4호기 R/W 1번째롤 이상없이 나갔습니다. 모니터링 후 특이사항 발생시 공유드리겠습니다. @지석범PM (이반차FA) June 3, 2025 at 9:33 PM, Mohammad Amir : For press Anode -4 , AGV#15 is on the way ✅. I am monitoring. Thank you very much! June 3, 2025 at 9:56 PM, 지석범PM (이반차FA) : 넵 감사합니다~ June 3, 2025 at 9:57 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you very much! June 3, 2025 at 9:57 PM, Skwarek Tibor : Checking June 3, 2025 at 10:00 PM, Skwarek Tibor : Done June 3, 2025 at 10:05 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 10:24 PM, Karina Lyzanets : Sziasztok Szeretnék kérni segitséget Az Slitt Cathode 1 re gyertek légyszíves, köszönöm szépen June 3, 2025 at 10:30 PM, Karina Lyzanets : Slitt Anode 3 help pls June 3, 2025 at 10:31 PM, Karina Lyzanets : Sziasztok! Anode Slitt 3 mögött megállt a Conveyor pálya. Reel tálca pozíció hiba. Légyszives nézzétek meg. June 3, 2025 at 10:32 PM, Karina Lyzanets : 🆘 June 3, 2025 at 10:36 PM, Karina Lyzanets : 🆘 June 3, 2025 at 10:46 PM, gutenkunstabelzoltan : Done June 3, 2025 at 10:51 PM, Mohammad Amir : @gutenkunstabelzoltan Please check E0STKA32_C01 there is Light Curtain error and because of this error Job for Anode press -3 is being delayed. Thank you very much! June 3, 2025 at 10:52 PM, 지석범PM (이반차FA) : @김대호 (Kim Dae Ho) 아까 확인 하신 롤은 입력하셨던 보빈 아이디로 창고안에 적재했습니다. June 3, 2025 at 10:53 PM, 김대호 (Kim Dae Ho) : 감사합니다! June 3, 2025 at 10:53 PM, gutenkunstabelzoltan : Two guys working on it June 3, 2025 at 10:54 PM, Mohammad Amir : Thank you very much for the updates! June 3, 2025 at 10:58 PM, 조성준/samkoo/공정-FA : I think we need to help him, sir! Can you do it with me? @FA June 3, 2025 at 11:02 PM, gutenkunstabelzoltan : Done June 3, 2025 at 11:02 PM, 조성준/samkoo/공정-FA : Thank you June 3, 2025 at 11:30 PM, Oleksii Krasnoshchok : In anode press 4 long time waiting Agv u/w June 3, 2025 at 11:30 PM, Mohammad Amir : Sure Checking June 3, 2025 at 11:31 PM, gutenkunstabelzoltan : There is request agv are free so i dont know… June 3, 2025 at 11:32 PM, Mohammad Amir : I am checking,there is an issue. Thank you! June 3, 2025 at 11:32 PM, Mr.Miti (미티) FA : Nézz rá légyszíves az anod 35 roll raktárra June 3, 2025 at 11:33 PM, Mr.Miti (미티) FA : Onnan menne a roll de van ott valami történés. Köszönöm June 3, 2025 at 11:33 PM, Mohammad Amir : Please check STKA035_C01 it is inactive and because of this RBA3861 located at 3020 is not moving. And eventually job for RBA3847 press Anode -4 is getting delayed. Thank you very much! June 3, 2025 at 11:34 PM, gutenkunstabelzoltan : Sztem a talcan is van de all minden zolden June 3, 2025 at 11:34 PM, Mohammad Amir : Please check STKA035_C01. It is inactive since 9:47 PM. Thank you very much! June 3, 2025 at 11:37 PM, (Unknown) : @FA FA Cotter AGV problem occured. Please support the coater. June 3, 2025 at 11:38 PM, gutenkunstabelzoltan : An cat? June 3, 2025 at 11:38 PM, Mr.Miti (미티) FA : Ca June 3, 2025 at 11:38 PM, Mr.Miti (미티) FA : 2 June 3, 2025 at 11:40 PM, (Unknown) : Yes Ca 2 Rw 2 June 3, 2025 at 11:42 PM, gutenkunstabelzoltan : Manufacturing detect az mi? June 3, 2025 at 11:42 PM, gutenkunstabelzoltan : Nem tudom kiresetleni? June 3, 2025 at 11:42 PM, adambenczik : Melyik gép? June 3, 2025 at 11:43 PM, gutenkunstabelzoltan : Transzfer June 3, 2025 at 11:43 PM, gutenkunstabelzoltan : Coating June 3, 2025 at 11:43 PM, gutenkunstabelzoltan : Initialba van June 3, 2025 at 11:44 PM, adambenczik : Valami nem jól áll. Lehet hogy az anyag, vagy a transzfer June 3, 2025 at 11:45 PM, gutenkunstabelzoltan : Asszem meg van June 3, 2025 at 11:48 PM, Mr.Miti (미티) FA : Látja az anyagot a transzfer karon. De közbe már feltette a bufferra June 3, 2025 at 11:51 PM, (Unknown) : @FA Cotter AGV problem occured. Please support the coater. June 3, 2025 at 11:51 PM, gutenkunstabelzoltan : Fent vana polcon de az egyik szemzor nem latja rendesen mert tul jobboldalt van June 3, 2025 at 11:51 PM, gutenkunstabelzoltan : Azt megoldottam parasztna June 3, 2025 at 11:52 PM, gutenkunstabelzoltan : Most autostart pso abnormal annak ellenere h initialban van minden June 3, 2025 at 11:52 PM, 한동석 : @FA @KIM SEYEON [김세연]_FA 양극 2라인 2nd rewinder roll 올라간상태에서 멈췄습니다 현지작업자 대응 못하고있어 한국인 야간근무자 대응 부탁드립니다. 조치안되면 20분뒤 생산멈춥니다 June 3, 2025 at 11:52 PM, Mr.Miti (미티) FA : Hmm akkor valami még sincs initialban June 3, 2025 at 11:52 PM, Mr.Miti (미티) FA : Megyek June 3, 2025 at 11:52 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. June 3, 2025 at 11:53 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Are you checking this issue ,Job is getting delayed for Anode Press -4 because this issue. Thank you very much! June 3, 2025 at 11:54 PM, Skwarek Tibor : Working on it June 3, 2025 at 11:54 PM, gutenkunstabelzoltan : Pedig rohadjak meg June 3, 2025 at 11:54 PM, Mohammad Amir : Köszönöm szepen 🙏 June 3, 2025 at 11:56 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please go and check ca coater 2line with fa technicians. June 3, 2025 at 11:56 PM, KIM SEYEON [김세연]_FA : @한동석 저희 cs인원도 곧 갈겁니다. June 3, 2025 at 11:59 PM, 한동석 : 감사합니다. June 4, 2025 at 12:08 AM June 4, 2025 at 12:08 AM, Skwarek Tibor : Szívesen. Done June 4, 2025 at 12:10 AM, Mohammad Amir : For Anode Press-4 , AGV#25 on the way ✅. Thank you very much! June 4, 2025 at 12:27 AM, 임동현 : anode press unit 4 Please check the L/R June 4, 2025 at 12:28 AM, Mohammad Amir : LR received successfully and job created at 00:25 AM. ✅ Carrier RBA3843 assiged. I am monitoring. Thank you very much! June 4, 2025 at 12:31 AM, Mohammad Amir : @FA @Skwarek Tibor Please check STKA32_P01(3017) there is a cargo RBA3844 exists and it is not moving and blocking the roll delivery to Anode Press-4. SCS error :-3017 Key S/W off. Thank you very much! June 4, 2025 at 12:31 AM, Mr.Miti (미티) FA : We are here! June 4, 2025 at 12:32 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 12:54 AM, 김대호 (Kim Dae Ho) : 음극 프레스4 Agv 반송 지연으로 설비가 멈췄습니다. Anode press 4 Agv return delay caused equipment to stop. June 4, 2025 at 12:55 AM, Mohammad Amir : @김대호 (Kim Dae Ho) AGV#7 has been assigned ✅ for Anode Press -4. It got delayed because of this reason. Thank you very much! June 4, 2025 at 1:04 AM, Szeitz Flórián : Anód slitt 3 ra nem érkezik az AGV. Légyszives nèzzètek meg . Köszönöm June 4, 2025 at 1:04 AM, Mohammad Amir : Checking June 4, 2025 at 1:05 AM, Mohammad Amir : Please press LR again for Anode Slitter -3. There was an issue with last command. Thank you very much! June 4, 2025 at 1:07 AM, 김대호 (Kim Dae Ho) : Please check ! June 4, 2025 at 1:07 AM, Mohammad Amir : LR received successfully and job created at 1:07 ✅. Roll RBA3802 on the way. I am monitoring. Thank you very much! June 4, 2025 at 1:08 AM, Mohammad Amir : AGV#7 on the way to Slitter -3 Anode. ✅ Thank you very much! June 4, 2025 at 1:09 AM, 임동현 : anode press unit 4 Please check the L/R June 4, 2025 at 1:09 AM, Mohammad Amir : Checking June 4, 2025 at 1:10 AM, Mohammad Amir : LR received successfully and Job created at 1:08 ✅. Roll RBA3855 on the way. I am monitoring. Thank you very much! June 4, 2025 at 1:10 AM, Mohammad Amir : AGV#18 on the way to Anode Press-4 ✅. Thank you very much! June 4, 2025 at 1:23 AM, gutenkunstabelzoltan : @Mohammad Amir cat press they waiting for material and it dont come can u pls check it?! I dont see the issue June 4, 2025 at 1:23 AM, Mohammad Amir : Please tell me the machine number. Thank you very much! June 4, 2025 at 1:24 AM, gutenkunstabelzoltan : Thats the only press with loadreq i guess sorry i dont know which one is it June 4, 2025 at 1:24 AM, Mr.Miti (미티) FA : #3 June 4, 2025 at 1:24 AM, Mohammad Amir : I checked it is 3. June 4, 2025 at 1:27 AM, Mr.Miti (미티) FA : I say 😁 June 4, 2025 at 1:27 AM, Mohammad Amir : Please press LR again for Cathode Press-3. Thank you very much! June 4, 2025 at 1:28 AM, Mr.Miti (미티) FA : We have two roll át ca roll wh port but not moving. Maybe we solved this issue and the lr problem solved June 4, 2025 at 1:30 AM, Mohammad Amir : Please press LR again for Cathode Press-3. Still there is no job. In Last LR there was issue that's why you didn't receive the Roll. Thank you very much! June 4, 2025 at 1:31 AM, Mohammad Amir : Those both rolls have jobs to go to STK32. That's why we still need LR for Cathode Press-3. Thank you very much! June 4, 2025 at 1:37 AM, Mohammad Amir : This message was deleted. June 4, 2025 at 1:42 AM, Mohammad Amir : @gutenkunstabelzoltan @Mr.Miti (미티) FA For your information:- We received LR successfully at 1:39 and job has created ✅. Roll RBC3702 on AGV#14 on the way to Cathode Press-3. Thank you very much! June 4, 2025 at 1:43 AM, Mr.Miti (미티) FA : Thank you! June 4, 2025 at 1:43 AM, Mohammad Amir : Szívesen! June 4, 2025 at 1:43 AM, Mohammad Amir : Thank you very much too ! June 4, 2025 at 3:16 AM, Sárvári Márk : Segítséget kérnénk a Katód Jumbo raktárba.✌️ June 4, 2025 at 3:20 AM, Mr.Miti (미티) FA : Megyünk June 4, 2025 at 3:27 AM, Skwarek Tibor : Kész June 4, 2025 at 3:42 AM, 김대호 (Kim Dae Ho) : Anode sliter 3 Please check the L/R @Mohammad Amir June 4, 2025 at 3:43 AM, Mr.Miti (미티) FA : Agv moving June 4, 2025 at 3:43 AM, Mohammad Amir : LR received successfully and job created at 3:30 ✅. AGV#15 on the way. Thank you! June 4, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.04. FA "D" műszak: 9/13 Overtime (0):- Substitution (1): Szücs Géza Imre Sick (1):Nagy Zsolt Holiday (3): Martina Dávid, Kasztel Balázs, Hufnágel Dániel Shift change(0): ----- Elektróda(3): Oláh András, Szabadi Miklós, Kiss Balázs ----- Assembly GF(2): Novák Károly, Zsurbej Zsolt ----- Assembly 1F(2): Kovács Szabolcs, Novák Zoltán ----- Form+Modul(2): Nagy Gábor, Magyar Balázs June 4, 2025 at 6:46 AM, Jun(정우준)_SKOH FA : Day shift FA Schedule Date: 2025.06.04 Time: 06:00~18:00 1. Jeong WooJun PM 정우준 2. Samkoo choi gisu Köszönöm szépen June 4, 2025 at 7:02 AM, Koska Szilárd János : szasztok anód press 3 ra nemhoz anyagot 45 perce ránéznétek? köszönöm June 4, 2025 at 7:05 AM, Shakir (MCS) : Please Press LR again Thank you June 4, 2025 at 8:05 AM, Oláh András : Acs nem működik az összes agv megállt elektródán June 4, 2025 at 8:07 AM, Oláh András : @Szücs Géza FT-B June 4, 2025 at 8:11 AM, Szücs Géza FT-B : megoldások lehetnek: - Falon lévő AP pontok áramtalanítása 10-15mp-re - AP antennák letakarítása - AGV komm modul levélasztása 10 mpre a PLCről A legutolsót akkpr használjuk általában, ha 2-4 AGV-t érint csak az ACS komm hiba. Első 2 megoldás talán működhet. June 4, 2025 at 8:12 AM, Oláh András : Acsben nincs térkép és egyetlen agv se June 4, 2025 at 8:12 AM, Oláh András : Ez rendszer szintű probléma lesz nem 1-2 ap pont June 4, 2025 at 8:14 AM, Oláh András : Ujraindult 👍 June 4, 2025 at 8:17 AM, Hári Zoltàn : Anod 2 coateren elindult a termelés, elkezdtük használni az agv-ket. June 4, 2025 at 8:24 AM, Hári Zoltàn : Anod 2 -2-es rw-n megállt az agv, gyertek legyszi! June 4, 2025 at 8:24 AM, Hári Zoltàn : Coater June 4, 2025 at 8:31 AM, Shakir (MCS) : @FA Please check E0STKC34_P01 is OOS, AGV09 under alarm. Thank you June 4, 2025 at 8:35 AM, Yena Valerii : hello, please check why the material for Anode press 3 is not arriving June 4, 2025 at 8:36 AM, Szücs Géza FT-B : @mcs please June 4, 2025 at 8:36 AM, Szücs Géza FT-B : @Kiss Balázs F.A. légyszives June 4, 2025 at 8:37 AM, Shakir (MCS) : Please Press LR June 4, 2025 at 8:38 AM, Shakir (MCS) : Last LR received at 18:07, not successful Press again, Press 3 AN THANK YOU June 4, 2025 at 8:40 AM, Sazzad Bhai SKon : LR received, transfer initiated June 4, 2025 at 8:43 AM, Shakir (MCS) : This message was deleted. June 4, 2025 at 8:43 AM, Shakir (MCS) : AGV 19 assigned and RBA3895 on the way. Thank you June 4, 2025 at 8:43 AM, Yena Valerii : thanks June 4, 2025 at 8:51 AM, Shakir (MCS) : @FA Please check E0STKA34_P01 is OOS, AGV17 Idle Thank you June 4, 2025 at 8:58 AM, Shakir (MCS) : @Fa Please check Run time over error E0CNVC51_08_011/012 Thank you June 4, 2025 at 9:08 AM, Shakir (MCS) : @FA Please check E0STKC34_C01 there is Ready off during Forking error. Thank you very much! June 4, 2025 at 9:10 AM, Hári Zoltàn : @Szabadi Miki @Oláh András @Kiss Balázs F.A. ha tudtok gyertek az anod 2-re legyszi!köszi! June 4, 2025 at 9:10 AM, Oláh András : Megyek June 4, 2025 at 9:47 AM, Shakir (MCS) : @FA @Oláh András Please check E0CNVA51_06_006 track is OOS, several trays are waiting. Thank you June 4, 2025 at 10:08 AM, Szücs Géza FT-B : Assy GF en megállt termelés miatt az AN reel raktár ajtó kivágásával és telepítésével kezdjük most a munkálatokat! rövid időre az ANSTK51-et.meg kell állitanunk! VD ÉS NC közötti dupla ajtó rövid időre le lesz zárva, Assy értesítve. @Koska Szilárd János June 4, 2025 at 10:34 AM, Szücs Géza FT-B : Raktár visszaindítvs June 4, 2025 at 10:54 AM, Shakir (MCS) : @ FA Please investigate E0STKC34_M01. A "Data off sensor overtime error" Thank you. June 4, 2025 at 11:20 AM, Yena Valerii : pls, come to anode press 3 June 4, 2025 at 11:20 AM, Szücs Géza FT-B : In these cases, manufacturing uses the manual port. June 4, 2025 at 11:23 AM, Oláh András : Roll has no id, that's why waiting June 4, 2025 at 11:25 AM, Oláh András : Now UR recevied, agv 22 take the roll June 4, 2025 at 11:31 AM, Shakir (MCS) : ‘AGV successfully unload the carrier from press3 Thank you June 4, 2025 at 12:01 PM, Erik Gerzsenyi : Sziasztok Katod press 2-re nagyon lassan jon az AGV June 4, 2025 at 12:01 PM, Erik Gerzsenyi : Legyszi nezzetek ra mi lehet az oka June 4, 2025 at 12:01 PM, Erik Gerzsenyi : Koszi June 4, 2025 at 12:02 PM, Oláh András : Újra kértük az LR-t és már megy is az agv a tekercaet felvenni June 4, 2025 at 12:02 PM, Shakir (MCS) : Please Press LR June 4, 2025 at 12:03 PM, Oláh András : Agv#1 picking up the roll and deliver to cathode press2 June 4, 2025 at 12:07 PM, Shakir (MCS) : For Press1 June 4, 2025 at 12:10 PM, Oláh András : Yes we see. Rbc2616 or 17 will go to press2 June 4, 2025 at 12:17 PM, Shakir (MCS) : RBC2616 assigned for Press2, there is other jobs on STK31 that’s why you faced delay supply. Thank you June 4, 2025 at 12:24 PM, Shakir (MCS) : AGV16 assigned and on the way Press2 CA Thank you June 4, 2025 at 3:41 PM, Szücs Géza FT-B : @Koska Szilárd János @Erik Gerzsenyi CA Press 4en fogtok még termelni? le kellene ellenőriznem valamit az RW TR-nél. June 4, 2025 at 3:47 PM, Erik Gerzsenyi : Igen June 4, 2025 at 3:50 PM, KIM SEYEON [김세연]_FA : Yesterday, roll damaged at ca press 4 rw. we need investigate it not to happen again. June 4, 2025 at 5:23 PM, Shakir (MCS) : @FA Please check E0STK001, MCP safety relay off. Thank you June 4, 2025 at 5:25 PM, Kiss Balázs F.A. : 👍🏻 June 4, 2025 at 5:44 PM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.04 Time:18:00~06:00 Baek Hojong 전극 조성준 (Cho Sung Jun) GF 최명운 (CHOI Myoungwoon) 1F 김정희 (Kim jeong hul) June 4, 2025 at 5:49 PM, K.Krisz Coating : An 2 2 R/W agv nem viszi a jumbot. Rossz pozició. June 4, 2025 at 5:50 PM, Viczai Tamás : Megyünk June 4, 2025 at 6:42 PM, Irinyi László : Szervusztok! Segítséget kérnénk az anód press 1-es géphez. Az U/W robotkar nem működik June 4, 2025 at 6:42 PM, Viczai Tamás : Kész! June 4, 2025 at 7:06 PM, 김대호 (Kim Dae Ho) : Cathode sliter 2 L/R Check please June 4, 2025 at 7:06 PM, Skwarek Tibor : Checking June 4, 2025 at 7:11 PM, Skwarek Tibor : Material is on it s way June 4, 2025 at 7:33 PM, 조성준/samkoo/공정-FA : Cathode roll warehouse E0STKA34 server down I need your help! @FA June 4, 2025 at 7:34 PM, Viczai Tamás : Itt vagyok. June 4, 2025 at 8:48 PM, Czél Tamás : Sziasztok Katód Slitt 2-őn a robot nem viszi el a reeleket , kérlek nézzetek rá Köszönöm June 4, 2025 at 8:48 PM, Viczai Tamás : Megyünk June 4, 2025 at 8:48 PM, Czél Tamás : Téves, megoldottuk June 4, 2025 at 9:53 PM, 임동현 : anode press unit 4 Please check the AGV June 4, 2025 at 9:54 PM, Oláh Rajmund : Sziasztok gyertek légyszives anode press 1 re R/W robot probléma June 4, 2025 at 9:54 PM, Viczai Tamás : Megyünk June 4, 2025 at 10:01 PM, 지찬우 : Cathode press 7 R/W AGV Coming? June 4, 2025 at 10:09 PM, VK (mcs) : UR received but port is out of service June 4, 2025 at 10:10 PM, 지찬우 : Ok Send signal again June 4, 2025 at 10:11 PM, VK (mcs) : AGV 16 assigned June 4, 2025 at 11:45 PM, Irinyi László : Helló! Kis segítséget szeretnék kérni az anód press 4-es géphez. June 4, 2025 at 11:45 PM, Skwarek Tibor : Megyünk June 4, 2025 at 11:49 PM, 김대호 (Kim Dae Ho) : Cathode press 4 L/R Check please June 4, 2025 at 11:50 PM, Skwarek Tibor : Checking June 4, 2025 at 11:57 PM, 김대호 (Kim Dae Ho) : coming? June 4, 2025 at 11:58 PM, Skwarek Tibor : Agv13 on it s way with the material June 5, 2025 at 4:30 AM June 5, 2025 at 4:30 AM, Atif/Ivancsa FA : Anode warehouse machine E0STKA33-STK-SCP has error AGV Align step time over AGV 15. Tried but I need help it's been more than 20 mins. @fa June 5, 2025 at 4:30 AM, Viczai Tamás : Megyünk June 5, 2025 at 4:34 AM, Atif/Ivancsa FA : Thank you June 5, 2025 at 5:28 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.05 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 5, 2025 at 7:01 AM, Horváth Attila : Anod 2 gyertek léccives nem jo a 2es R/W June 5, 2025 at 7:07 AM, 최기수(GI SU CHOI) : . June 5, 2025 at 7:07 AM, Oláh András : Kész June 5, 2025 at 8:14 AM, Hári Zoltàn : Fóliaraktárhoz szeretnék kérni technikust! Köszönöm! June 5, 2025 at 8:14 AM, Oláh András : Megyünk June 5, 2025 at 9:43 AM, Yena Valerii : pls, come to anode press 1 June 5, 2025 at 9:44 AM, Oláh András : Coming wait a little June 5, 2025 at 11:03 AM, Faisal / Ivancsa FA : Need help for AGV 3 at Cathode line 2 rewinder 2 June 5, 2025 at 11:06 AM, Shakir (MCS) : @FA @ACS Please check AGV03 Coater CA, Auto select abnormal. Thank you June 5, 2025 at 11:12 AM, Oláh András : 👍🏻 June 5, 2025 at 1:24 PM, Shakir (MCS) : @FA @Oláh András Please check E0CNVA51_06_006/007, Run time over error. Thank you June 5, 2025 at 1:28 PM, Oláh András : 👍🏻 June 5, 2025 at 1:28 PM, Oláh András : Solved June 5, 2025 at 2:21 PM, Horváth Attila : Katod2 gyertek léccives nem viszi el a jumbot June 5, 2025 at 2:21 PM, Horváth Attila : Katod2 gyertek léccives nem viszi el a jumbot June 5, 2025 at 2:21 PM, Oláh András : Megyünk June 5, 2025 at 2:23 PM, Kiss Balázs F.A. : Coating* June 5, 2025 at 4:42 PM, Faisal / Ivancsa FA : @FA Need help for AVG16 at the end of Coating Anode, Charging port is not coming out June 5, 2025 at 4:43 PM, Oláh András : Is it ok now? June 5, 2025 at 4:44 PM, Faisal / Ivancsa FA : No June 5, 2025 at 4:52 PM, Shakir (MCS) : @FA Please check E0STK002_C01, Travel Driver Error. Thank you June 5, 2025 at 7:35 PM, Mohammad Amir : @FA @Farkas Tamàs Please check E0STKC35_C01 there is MCP Control Power CP trip error. Thank you! June 5, 2025 at 7:36 PM, Skwarek Tibor : Checking June 5, 2025 at 7:40 PM, Skwarek Tibor : Done June 5, 2025 at 7:54 PM, Mohammad Amir : @FA @Farkas Tamàs Please check E0CNVA51_06_052/53 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 5, 2025 at 7:54 PM, Skwarek Tibor : Im here June 5, 2025 at 7:56 PM, Mohammad Amir : @FA Please check E0STKA31_C01 there is Light Curtain error and because of this Job for Slitter anode-2 is getting delayed. Thank you very much! June 5, 2025 at 7:57 PM, Skwarek Tibor : Done June 5, 2025 at 7:58 PM, Skwarek Tibor : Checking June 5, 2025 at 8:16 PM, Mohammad Amir : @FA Are you working on this issue ? Materials delivery to Anode Slitter -2 has been delayed by 23 minutes. Thank you very much! June 5, 2025 at 8:16 PM, Skwarek Tibor : Working on it. We are here June 5, 2025 at 8:35 PM, Skwarek Tibor : Done June 5, 2025 at 8:37 PM, Mohammad Amir : Issue has been resolved. AGV#7 on the way to Slitter -2 Anode now ✅. Thank you very much! June 5, 2025 at 10:43 PM, Mohammad Amir : @FA @Farkas Tamàs Please check E0CNVA51_06_054/53 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 5, 2025 at 10:45 PM, Viczai Tamás : Done June 5, 2025 at 10:45 PM, Mohammad Amir : Thank you very much! June 6, 2025 at 2:23 AM June 6, 2025 at 2:23 AM, na1tis : Hello, Cathode Press 4,not working R/W,help me June 6, 2025 at 2:24 AM, Viczai Tamás : Megyünk June 6, 2025 at 2:45 AM, Mohammad Amir : @Viczai Tamás Please check E0STK001_C01 there is MCP safety relay off error. Thank you very much! June 6, 2025 at 2:47 AM, Viczai Tamás : Done June 6, 2025 at 3:11 AM, Czél Tamás : Sziasztok Megnéznétek kérlek hogy Katód oldalon miért nem jön a reel tálca? Köszönöm June 6, 2025 at 3:11 AM, Viczai Tamás : Megyünk June 6, 2025 at 3:46 AM, (Unknown) left this chatroom. June 6, 2025 at 4:02 AM, Farkas Tamàs : Termeléses műszakvezetőt kérnék AN Press 1-hez. Köszi June 6, 2025 at 4:05 AM, Oláh Rajmund : 10 perc és ott vagyok June 6, 2025 at 4:06 AM, Farkas Tamàs : Köszönöm June 6, 2025 at 4:47 AM, Mohammad Amir : @Viczai Tamás Please check E0STK001_C01 there is MCP Safety Relay Off error. Thank you! June 6, 2025 at 4:48 AM, Simon Attila F. A. : Open door, manual work... June 6, 2025 at 5:03 AM, 조혜근 : @FA 음극 슬리터 1호기 RW 이재기가 롤을 버퍼에 올리려고 올라가는 도중에 멈춰있는데 지금 조치가 불가능한가요? Is it impossible to take action now that the RW Lee Jae-ki of the anode slitter unit 1 is stopped in the middle? June 6, 2025 at 5:04 AM, Viczai Tamás : Igen! June 6, 2025 at 5:05 AM, 조혜근 : So, are you going to take action during the week? June 6, 2025 at 5:05 AM, 조혜근 : *Friday morning shift June 6, 2025 at 5:41 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.06 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 6, 2025 at 6:03 AM, Viktor Vadas : Sziasztok! Segitseget kernenk Coating Anod 1 2-es rewinderen! June 6, 2025 at 6:06 AM, 최재균 : 안녕하세요. 전극 코팅 1 라인 2번 리와인더 AGV 문제가 있어서 설비를 정지 해야합니다. 현장에 아무도 안계신가요 June 6, 2025 at 6:07 AM, KIM SEYEON [김세연]_FA : @최기수(GI SU CHOI) 현장확인 부탁드립니다. June 6, 2025 at 6:12 AM, Szarka Adrián : Sziasztok Anod sl asztalnál 7 agv megállt, itt csipog össze vissza June 6, 2025 at 6:13 AM, Kaniz / Ivancsa FA : In cathode, their is no one and all mechines are off June 6, 2025 at 6:13 AM, Kaniz / Ivancsa FA : Please here June 6, 2025 at 6:16 AM, Rácz Dániel / FA : Solved June 6, 2025 at 6:21 AM, Szarka Adrián : Anod Press 1 gépen állítólag nem működik az RW oldalon a leszedo robot így kaptuk meg az éjjeles műszaktól, este nem tudták megcsinálni 😘😘😘😘❤️❤️❤️❤️ June 6, 2025 at 6:21 AM, Szarka Adrián : Kerlek nézz ra erre June 6, 2025 at 6:23 AM, Farkas Tamàs : Nappalos Koreaiak fognak menni megnézni. Ne legyen el indítva a Transfer. A két kar egymástól függetlenül mozog le-föl. June 6, 2025 at 6:24 AM, Rácz Dániel / FA : This message was deleted. June 6, 2025 at 6:24 AM, Szücs Géza FT-B : ezt a gépet ne használjátok még kérlek June 6, 2025 at 6:24 AM, Szarka Adrián : Rendben okkes és anod Press 2 gépen is ez a hiba. Erről is tudtok ? Köszönöm June 6, 2025 at 6:25 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.06. 10+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Support(1): 김지 June 6, 2025 at 6:25 AM, Szarka Adrián : Használjuk csak akkor a robotot nem fogjuk. Az úgy jó nem ? June 6, 2025 at 6:27 AM, Szücs Géza FT-B : fent van a jumbo, ne menjetek be alá! June 6, 2025 at 6:27 AM, Szücs Géza FT-B : legalábbis azt az infót kaptam, hogy még rajta van June 6, 2025 at 6:28 AM, Szarka Adrián : Azt a roll el vitte az agv ami fent volt June 6, 2025 at 6:29 AM, Böröcz Tamás : Leszedte June 6, 2025 at 6:30 AM, Szücs Géza FT-B : ohhh June 6, 2025 at 6:31 AM, Szarka Adrián : Akkor mi legyen ? Mehet a következő roll is ? Próbáljuk vagy hagyjuk ? @Szücs Géza FT-B June 6, 2025 at 6:31 AM, Böröcz Tamás : Egyszer élünk June 6, 2025 at 6:33 AM, Szücs Géza FT-B : ha nem tudtok másik gépen termelni, akkor használjátok manuálisan. Csak a vizsgálat idejére lehet le kell állnotok. Valószínűleg reggel 8 előtt nem fog elkezdődni a javítás. June 6, 2025 at 6:33 AM, 최재균 : @KIM SEYEON [김세연]_FA 전극 코팅 음극 1 라인 코팅 멈췄습니다. 조치 후에 다시 생산 시작할게요 June 6, 2025 at 6:36 AM, Szarka Adrián : Oksa. Köszi. Majd nézzetek meg anod Press 2 is mert azon se működik a robot állítólag. June 6, 2025 at 6:43 AM, 김지수PM(Gyuri)_FA : 안녕하세요, agv 이재기 포트 진입 시 AGV 전면 센서에 롤이 감지되지 않도록 부탁드리겠습니다! 감사합니다. June 6, 2025 at 6:48 AM, Viktor Vadas : Sziasztok! Coating Anod Jumbo raktarhoz szeretnek segitseget kerni! June 6, 2025 at 6:48 AM, Viktor Vadas : 1-es raktar June 6, 2025 at 6:49 AM, Rácz Dániel / FA : Jövünk June 6, 2025 at 7:12 AM, Viktor Vadas : Most pedig a 2-es😂 June 6, 2025 at 7:12 AM, Viktor Vadas : Koszonom! June 6, 2025 at 7:16 AM, Rácz Dániel / FA : Jövünk June 6, 2025 at 8:44 AM, Viktoriia Hleba : u/w robot error anod press 3 June 6, 2025 at 8:44 AM, Rácz Dániel / FA : Megyünk June 6, 2025 at 9:15 AM, Anton Mashchenko : Cathode press 3, AGV 12 position error, help! Location U/W! Thanks! June 6, 2025 at 9:15 AM, Rácz Dániel / FA : Megyek June 6, 2025 at 9:15 AM, Rácz Dániel / FA : This message was deleted. June 6, 2025 at 9:16 AM, Csanálosi Gábor FA : Cnvc51 elakadás is van June 6, 2025 at 9:16 AM, Csicskovics Balázs : Cathode Roll 5-ös raktárba megállt a daru gyertek légyszíves Köszönöm June 6, 2025 at 9:17 AM, Rácz Dániel / FA : Itt vagyok June 6, 2025 at 9:21 AM, Szücs Géza FT-B : kéesz June 6, 2025 at 9:23 AM, Rácz Dániel / FA : Kész June 6, 2025 at 9:28 AM, Viktoriia Hleba : anode slitt 1 nincs Agv - 25 perc June 6, 2025 at 9:29 AM, Rácz Dániel / FA : Kész June 6, 2025 at 9:31 AM, Csicskovics Balázs : Köszönöm June 6, 2025 at 9:32 AM, Rácz Dániel / FA : Nincs rá elérhető anyag 🥹 June 6, 2025 at 9:34 AM, Szarka Adrián : @Szücs Géza FT-B mikor jönnek megnézni a robotot anod Press 1-2 géphez ? Kérlek szólj valakinek hogy siessenek ide mert nekünk nyomni kell a termelést és az operator létszámuk úgy van hogy agv termelünk. Plusz ember nincs arra hogy rollt toligáljon. Köszönöm szépen June 6, 2025 at 9:34 AM, Szarka Adrián : Vagy próbáljuk ki anod Press 1 gépen a robotot hogy tényleg rossz vagy sem? Reggel 1 rollt el vitt amit írtunk. De erre te add rá az ámen hogy mehet vagy sem. June 6, 2025 at 9:35 AM, Rácz Dániel / FA : @duzzaman Md (MCS) „Please check if there is any available material on this, thank you.” AN Slitt #1 June 6, 2025 at 9:36 AM, duzzaman Md (MCS) : Unfortunately, no search lot June 6, 2025 at 9:36 AM, Rácz Dániel / FA : Thank you June 6, 2025 at 9:37 AM, Viktoriia Hleba : 2 slitter anode Nincs tálca . Please check June 6, 2025 at 9:39 AM, duzzaman Md (MCS) : Hi @Rácz Dániel / FA Please check LTA0916 at E0CNVA51_06_034 physically. Its not moving June 6, 2025 at 9:40 AM, Rácz Dániel / FA : Ready Sir June 6, 2025 at 9:41 AM, Rácz Dániel / FA : Thank you for the information 🙏 June 6, 2025 at 9:41 AM, Rácz Dániel / FA : Elindultak June 6, 2025 at 10:08 AM, Szarka Adrián : @Rácz Dániel / FA jött 2 fa Kollega anod Press 1 géphez. Ide tudnál jönni legyezives ? Mi megyünk ki meetingre, és valaki beszéljen kerlek itt az FA kollégákkal, hogy jó vagy nem jó a robot. És anod Press 2 gépen is nézzek meg mert mi úgy kaptuk reggel az infót hogy ott se jó a robot June 6, 2025 at 10:08 AM, Szarka Adrián : Köszönöm June 6, 2025 at 10:23 AM, Szücs Géza FT-B : elindítunk egy tesztet June 6, 2025 at 10:36 AM, Rácz Dániel / FA : Oksa June 6, 2025 at 10:39 AM, Szücs Géza FT-B : @Szarka Adrián Press AN2- vel fogtok dolgozni? June 6, 2025 at 10:54 AM, Szücs Géza FT-B : @Nagy Dávid 4 @Szarka Adrián Mikor tudnánk kipróbálni automata módban Slitt AN#1-et? June 6, 2025 at 10:55 AM, Szarka Adrián : Igen szeretnénk indulni mert áll a Slitt gep mert nem kap elég roll és indulna anod Press 2 is June 6, 2025 at 10:55 AM, Szarka Adrián : Mehet automata modba. June 6, 2025 at 10:55 AM, Szarka Adrián : Küldjétek be a raktárba a kész roll legyszives és akkor viszi az agv June 6, 2025 at 10:55 AM, Szücs Géza FT-B : csak mert a presszes opi most vitte el a Rollt slittre.... mert ez lett kiadva neki... June 6, 2025 at 10:56 AM, Szücs Géza FT-B : akkor a kövi megy a rakiba June 6, 2025 at 10:56 AM, Böröcz Tamás : @presszeggy June 6, 2025 at 10:56 AM, Szarka Adrián : Igen mert nem volt jó a robot mindjárt szólunk neki hogy a következő roll ne vigye June 6, 2025 at 10:57 AM, Szücs Géza FT-B : nem, ott a 2re gondoltam, hisz az 1en dolgoznak, azt látni.... June 6, 2025 at 11:42 AM, Sazzad Bhai SKon : @FA Please do not create manual jobs for Slitting CNV P07 port. @김주연 Hello pm, some manual jobs are being created for CNV. We'll delete them June 6, 2025 at 11:52 AM, Szücs Géza FT-B : i think manufacturing create manual orders June 6, 2025 at 11:53 AM, Szücs Géza FT-B : sikeres az első teszt, mehet automatában June 6, 2025 at 11:59 AM, Szarka Adrián : Nagyon szépen köszönjük June 6, 2025 at 1:04 PM, 김지수PM(Gyuri)_FA : 코팅 담당하시는 PM님 계실까요? June 6, 2025 at 1:26 PM, 김건희 : 한국방문 휴가 중이신데 무슨일이신가요 June 6, 2025 at 1:44 PM, Szücs Géza FT-B : @Rácz Dániel / FA @Böröcz Tamás AN Press1-nél segítsetek légyszives @김지수PM(Gyuri)_FA -nak. Köszönöm szépen June 6, 2025 at 1:45 PM, Rácz Dániel / FA : Megyünk June 6, 2025 at 2:30 PM, Sazzad Bhai SKon : It was RTD job. New rules have been deployed yesterday. June 6, 2025 at 2:46 PM, Szarka Adrián : @Rácz Dániel / FA meg találtuk a rollokat anod Slitt 1-2 gépre most tesszük vissza a raktárba őket jól. Kérlek figyeld hogy elindulnak e oda az agv -k ha nem akkor kerlek inditsd újra a robotot majd köszönöm June 6, 2025 at 2:47 PM, Rácz Dániel / FA : @김지수PM(Gyuri)_FA the first time was good June 6, 2025 at 2:49 PM, Rácz Dániel / FA : Rendben June 6, 2025 at 2:50 PM, Böröcz Tamás : Photo June 6, 2025 at 2:50 PM, 장정훈 : @KIM SEYEON [김세연]_FA @MCS,RTD 지금 음극 슬리터 대기롤 반송 가능한 대상이 얼마나 있는지 확인 가능 할까요? 재고는 100000m 이상 보유 하고 있는데 반송이 되지 않고 않습니다 STK는 특이사항이 없습니다 Can I check how many are in the Anode slitter standby roll right now? We have more than 100,000 m in stock, but automatic return is not possible. There is nothing special about STK June 6, 2025 at 2:53 PM, Sazzad Bhai SKon : Is it on 1F? I see E0CNVC53_M02 is working good. 173 material available. But buffer port E0CNVC53_08_201 is oos June 6, 2025 at 2:54 PM, Sazzad Bhai SKon : Also E0CNVC53_08_204 is oos since 14:20. This is blocking the transportation @FA please check the ccs June 6, 2025 at 3:00 PM, Böröczki Balázs : Checking. June 6, 2025 at 3:02 PM, Szarka Adrián : Vissza küldtünk már elég sokat. Megy a slittre ? June 6, 2025 at 3:02 PM, 장정훈 : No, please check the roll that can be returned to the Anode slitter from the roll warehouse! June 6, 2025 at 3:03 PM, Sazzad Bhai SKon : Only 4 available, June 6, 2025 at 3:04 PM, Sazzad Bhai SKon : Because for other rolls the STK status is not Stored. Please reset SCS data June 6, 2025 at 3:05 PM, Rácz Dániel / FA : Nézem June 6, 2025 at 3:06 PM, Böröcz Tamás : @Sazzad Bhai SKon There was some problem in STKC34 There is a carrier: RBC3853 AGV 16 was assign to it Could you reassign it to CA slitt 1 P01? June 6, 2025 at 3:07 PM, Böröcz Tamás : Carrier is on E0STKC34_P01 June 6, 2025 at 3:07 PM, 김지수PM(Gyuri)_FA : @Szücs Géza FT-B On anode 1 press , we adjusted the buffer(y-axis position sensor), it was not detected. And adjusted the accerlation speed. There were no problems for 2 rolls transportion. June 6, 2025 at 3:09 PM, Nagy Dávid 4 : Anod roll raktár daru kiált hibára help help köszönöm szépen June 6, 2025 at 3:10 PM, Szarka Adrián : Anod 4 roll raktár megállt June 6, 2025 at 3:11 PM, Rácz Dániel / FA : Mégsem, elkell mennem CA reel raktárba. June 6, 2025 at 3:13 PM, 장정훈 : There are many rolls that are normally worn in SCS. It is impossible to say that all 100000m are NG June 6, 2025 at 3:19 PM, duzzaman Md (MCS) : Please check the BP port. E0stkC34_p01_bp01 June 6, 2025 at 3:21 PM, Dana Honak : Cathode slitt 1-2 ninc AGV! June 6, 2025 at 3:25 PM, duzzaman Md (MCS) : Thers are active jobs. Materials will be delivered June 6, 2025 at 3:32 PM, Sazzad Bhai SKon : Now 9 are available. MES data is 35 but RTD doesn't know the carrier location June 6, 2025 at 3:42 PM, Rácz Dániel / FA : AGV 7 most veszi fel a jumbo rollt a C34es raktárból és viszi a CA Slitt 1-re June 6, 2025 at 3:42 PM, Szücs Géza FT-B : @Böröcz Tamás sikerált? June 6, 2025 at 3:43 PM, Böröcz Tamás : Could you share the conditions required for availability? June 6, 2025 at 3:43 PM, Böröcz Tamás : Az idő megoldotta June 6, 2025 at 3:43 PM, Szücs Géza FT-B : ohhh June 6, 2025 at 3:44 PM, Sazzad Bhai SKon : Equipment: STK Unit: Shelf Stored In-service Not UNK Full But currently the materials are not inside STK according to RTD June 6, 2025 at 3:45 PM, Viktoriia Hleba : 1 slitt anode 24 Agv stop. Please check June 6, 2025 at 3:45 PM, Sazzad Bhai SKon : So, RTD doesn't know their current location! June 6, 2025 at 4:20 PM, Lee Junghan(이정한)_CS : @최기수(GI SU CHOI) 좀전에 문의하신 AGV 위치가 ACS상과 다르다는 내용때문에 코트 음극에서 잠시 만나뵐수있을까요? June 6, 2025 at 4:22 PM, Dana Honak : Cathode slitt 1 ninc AGV! 35 perc June 6, 2025 at 4:23 PM, duzzaman Md (MCS) : Agv 21 will be there shortly June 6, 2025 at 4:39 PM, 김건희 : I can find in the RTD, but why not it is on the list to go to the Anode slitter 1,2? RBA0315 RBA0997 RBA3217 June 6, 2025 at 4:40 PM, Sazzad Bhai SKon : RBA0315 Shelf E0STKA35(0100401) is out of service, checking others June 6, 2025 at 4:41 PM, Dana Honak : ninc AGV June 6, 2025 at 4:42 PM, Sazzad Bhai SKon : Same problem for RBA0997. And RBA3217 is available for delivery June 6, 2025 at 4:45 PM, 김건희 : What is meaning E0STKA35? Where is it? June 6, 2025 at 4:46 PM, Sazzad Bhai SKon : This is roll anode STK. June 6, 2025 at 4:54 PM, Csicskovics Balázs : Kérlek nézzetek utána mi lehet a probléma! Köszönöm June 6, 2025 at 4:57 PM, Szücs Géza FT-B : @@mcs please June 6, 2025 at 4:59 PM, Viktoriia Hleba : Anod slitt 1 ninsc AGV 38 perc June 6, 2025 at 4:59 PM, Sazzad Bhai SKon : Checking June 6, 2025 at 5:01 PM, Pálosi Róbert : Nincsen order rá. June 6, 2025 at 5:02 PM, duzzaman Md (MCS) : This message was deleted. June 6, 2025 at 5:02 PM, duzzaman Md (MCS) : As we see for CA SL 01, one of the job just completed at 16:59 Before this, the job was completed at 16:23 June 6, 2025 at 5:07 PM, Szarka Adrián : Anod Press 7 gépen UW oldalon a robot még mindig csörög zörög menet közben. Ezt meg kéne nézetni valami mester úrral mert tönkre fog így menni June 6, 2025 at 5:08 PM, Szücs Géza FT-B : @Pálosi Róbert légyszives hallgassátok meg melyik része adja a hangot, ha kell manuálban mozgassátok át légyszives June 6, 2025 at 5:10 PM, duzzaman Md (MCS) : Checking further. RBA4361 at E0STKA31_P01_BP01 is blocking it June 6, 2025 at 5:18 PM, Viktoriia Hleba : This message was deleted. June 6, 2025 at 5:18 PM, Sazzad Bhai SKon : Checking June 6, 2025 at 5:19 PM, duzzaman Md (MCS) : @FA PLEASE CHECK E0STKA31_P01_BP01 Carrier is stuck there and delaying other jobs for SL AN Thank you June 6, 2025 at 5:19 PM, duzzaman Md (MCS) : Check this on priority please 🙏 June 6, 2025 at 5:19 PM, Viktoriia Hleba : 2 slitter anode nincs Agv- 15 perc June 6, 2025 at 5:20 PM, duzzaman Md (MCS) : It will be delivered once the above mentioned issue is solved. Its blocking the jobs June 6, 2025 at 5:20 PM, Pálosi Róbert : Mcs June 6, 2025 at 5:21 PM, Viktoriia Hleba : thanks June 6, 2025 at 5:24 PM, Böröcz Tamás : There is a carrier RBA2947 June 6, 2025 at 5:24 PM, Böröcz Tamás : It blocking the others Maybe manufaturing was requested it to wrong port. June 6, 2025 at 5:25 PM, Böröcz Tamás : We have no access to give manual job June 6, 2025 at 5:26 PM, Böröcz Tamás : E0STKA31_P01 June 6, 2025 at 5:27 PM, duzzaman Md (MCS) : Please remove it from BP01 port and rack in manual port. June 6, 2025 at 5:27 PM, duzzaman Md (MCS) : In M01 June 6, 2025 at 5:28 PM, Böröcz Tamás : Ok June 6, 2025 at 5:28 PM, Böröcz Tamás : We cannot June 6, 2025 at 5:28 PM, Böröcz Tamás : Thanks for understanding June 6, 2025 at 5:30 PM, duzzaman Md (MCS) : No problem. If possible, You can just take it out and put it on M01. We'll do the rest. Thank you June 6, 2025 at 5:31 PM, Böröcz Tamás : It's possible that you send and AGV to Store it to another stocker Thank you June 6, 2025 at 5:34 PM, duzzaman Md (MCS) : Thank you. We are trying to figure it out June 6, 2025 at 5:35 PM, Sazzad Bhai SKon : Please confirm if RBA2947 is on P01? June 6, 2025 at 5:37 PM, Sazzad Bhai SKon : The problem is RBA2947 was manually created until P01 but did not remove. I would like to know why manual job was created to Auto port instead of manual port? This is causing a problem where two carriers are on opposite direction June 6, 2025 at 5:38 PM, Szücs Géza FT-B : Guys, This is the way. June 6, 2025 at 5:38 PM, Böröcz Tamás : Yes June 6, 2025 at 5:38 PM, Böröcz Tamás : Yes June 6, 2025 at 5:39 PM, Böröcz Tamás : Yes June 6, 2025 at 5:39 PM, Sazzad Bhai SKon : This is true, checking June 6, 2025 at 5:40 PM, duzzaman Md (MCS) : No data about RBA2947 in MCS. If you confirm it, we will install it there. If manual job wasn't created to an auto port, this situation would have never created. June 6, 2025 at 5:44 PM, Sazzad Bhai SKon : These carrier are not responding to MCS . Please transfer RBA2947 manually to the shelf from scs June 6, 2025 at 5:46 PM, Szücs Géza FT-B : Autoport = AGV port Manual port = manufacturing use with manual car You need create an order, from autoport, to an other STK autoport please. June 6, 2025 at 5:48 PM, Sazzad Bhai SKon : The best solution is to put them in manual port. June 6, 2025 at 5:58 PM, Szücs Géza FT-B : Manufacturing requested the Roll in the wrong place. Moving between automatic port and manual port is also an order creation. FA cannot create an order. MCS is allowed to create an order. June 6, 2025 at 5:59 PM, Szücs Géza FT-B : My workday is over, have a nice day. June 6, 2025 at 6:01 PM, VK (mcs) : I will work on it. Thx and have a good day June 6, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 6, 2025 at 6:20 PM, Vörös Geri : Katód press 7 gép mögött a 13 as AGV kiált hibára megnéznétek?köszi June 6, 2025 at 6:20 PM, Mr.Miti (미티) FA : Meg igen June 6, 2025 at 6:35 PM, VK (mcs) : @FA Can you please check Anode roll STK A31 2 carriers are on the ports . Please store them in STK. I already tried to it but failed. direction of port is versa. June 6, 2025 at 6:38 PM, Mr.Miti (미티) FA : Checking June 6, 2025 at 6:44 PM, Vörös Geri : Katód press 7 gép mögött a 13 as AGV kiált hibára megnéznétek?köszi June 6, 2025 at 6:47 PM, adambenczik : Kész June 6, 2025 at 6:50 PM, 은향(OH EUN HYANG) : @Sazzad Bhai SKon There is a dry powder electrode 7ea in the GF cathode back warehouse. Please check! June 6, 2025 at 6:52 PM, VK (mcs) : Can you please tell me equipment ID and pallet ID June 6, 2025 at 6:57 PM, Karina Lyzanets : Sziasztok, Slitt Cathode 2 re nem érkezik az AGV robot, tudnátok nézni mi az oka? Köszönöm szépen June 6, 2025 at 6:59 PM, Mr.Miti (미티) FA : Nézem June 6, 2025 at 7:04 PM, Mr.Miti (미티) FA : Volt egy kis fennakadás a raktárban ahonnan érkezni fog a roll. De a gubanc megoldva, hamarosan érkezik a roll. June 6, 2025 at 7:06 PM, Karina Lyzanets : Köszönöm szépen June 6, 2025 at 7:16 PM, VK (mcs) : @FA Please check Cathode Roll STK C35 -P01 Output H/S off! June 6, 2025 at 7:21 PM, Mr.Miti (미티) FA : This message was deleted. June 6, 2025 at 7:21 PM, Mr.Miti (미티) FA : Check June 6, 2025 at 7:21 PM, Mr.Miti (미티) FA : Solved June 6, 2025 at 7:23 PM, VK (mcs) : Please apply LR again. Previous job cancelled. Thx June 6, 2025 at 7:38 PM, Mr.Miti (미티) FA : AGV14 on the way. June 6, 2025 at 8:56 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.06 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 6, 2025 at 9:09 PM, Vörös Geri : Katód slitt 1 robot kar megált.megnéznétek?köszi June 6, 2025 at 9:13 PM, gutenkunstabelzoltan : Elvileg ok! June 6, 2025 at 9:51 PM, VK (mcs) : @FA Please check Anode reel conveyor A51 (6052) Run time over. June 6, 2025 at 10:03 PM, VK (mcs) : @FA Please check this error. Many carriers are waiting. Thx June 6, 2025 at 10:05 PM, adambenczik : We are here June 6, 2025 at 10:07 PM, gutenkunstabelzoltan : Done June 6, 2025 at 10:12 PM, Yena Valerii : Hello, pls come to anode press 7 June 7, 2025 at 12:39 AM June 7, 2025 at 12:39 AM, 조혜근 : Please check the UW LR signal of anode press unit 7 June 7, 2025 at 12:40 AM, 조혜근 : The buffer is on, but the roll is not coming June 7, 2025 at 12:40 AM, VK (mcs) : AGV 25 is on the way June 7, 2025 at 12:41 AM, 조혜근 : Thank you for the confirmation June 7, 2025 at 2:53 AM, Vörös Geri : Katód press 7 mögött a 9-es AGV kiált hibára.megnéznétek?köszi June 7, 2025 at 3:48 AM, Nauman/Ivancsa FA : Facing a problem…. EOSTKA34-TR-MCP I tried but problem start again. Need some help Thanks June 7, 2025 at 3:53 AM, Yena Valerii : pls, come to E0STKA34 June 7, 2025 at 3:55 AM, Nauman/Ivancsa FA : Im here June 7, 2025 at 4:07 AM, adambenczik : Solved June 7, 2025 at 4:26 AM, Karina Lyzanets invited Margaret. June 7, 2025 at 5:52 AM, Mohammad Amir : @FA Please check E0STKA51_C01/C02 these cranes are inactive and because of this several materials are waiting on the CNVC51. Thank you very much! June 7, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.07. 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Boromisza Zoltán, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(1): 김지수 June 7, 2025 at 6:08 AM, Mohammad Amir : @FA @Pálosi Róbert Jó Reggelt, Please check this issue,it still exists and because of this several jobs are waiting on the CNVC51. Thank you very much! June 7, 2025 at 6:09 AM, Pálosi Róbert : Going June 7, 2025 at 6:10 AM, Szücs Géza FT-B : systems are not have error June 7, 2025 at 6:11 AM, Mohammad Amir : Jó Reggelt, Yes there is no error. However cranes are inactive since 5:16. That's why there is traffic of materials on CNVC51. Please make the cranes C01/C02 in active state. Thank you very much! June 7, 2025 at 6:13 AM, Szücs Géza FT-B : ohhh. 1 hour ago... June 7, 2025 at 6:15 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check this and if you cannot solve it, let me know I will call cs team June 7, 2025 at 6:16 AM, Mohammad Amir : Good Morning Sir, Issue has been resolved ✅. Now cranes are moving. I am monitoring. Thank you very much! June 7, 2025 at 6:17 AM, Szücs Géza FT-B : @Mohammad Amir Slitt will need a few empty trays. However, STKA51 is busy. Therefore, it is important that a few empty trays come from STKA52. June 7, 2025 at 6:18 AM, Mohammad Amir : Sure ,I am checking. June 7, 2025 at 6:18 AM, Szücs Géza FT-B : The cranes are moving. They have many tasks. June 7, 2025 at 6:18 AM, Szücs Géza FT-B : ( STKA51 ) June 7, 2025 at 6:27 AM, Kaniz / Ivancsa FA : There is a problem on robot.. Robot not taking a rollar June 7, 2025 at 6:29 AM, Mohammad Amir : Hello, I have transferred few empty trays from STKA52 as per request so that production can continue. Fell free to inform me if you need more. I am monitoring as well. Thank you very much! June 7, 2025 at 6:36 AM, Szarka Adrián : Sziasztok Anod Sl asztalnál az 1 számú agv elfáradt. Gyertek legyszives June 7, 2025 at 6:36 AM, Szarka Adrián : Köszi June 7, 2025 at 6:37 AM, Szücs Géza FT-B : nem kellene folyton ráülnöd 🤣😄 June 7, 2025 at 6:37 AM, Szücs Géza FT-B : @Pálosi Róbert intézkedés szükséges June 7, 2025 at 6:39 AM, Szarka Adrián : Jött valaki és ki nyomta a hibát June 7, 2025 at 6:40 AM, Pálosi Róbert : Oks June 7, 2025 at 6:43 AM, Viktor Vadas : Sziasztok! Anod 1 indul 7 ora korul, az fog ma termelni, oda hasznalunk AGV-t June 7, 2025 at 6:45 AM, Szücs Géza FT-B : @MR @FA @Random June 7, 2025 at 6:53 AM, 임동현 : anode sliter 2 Please check the L/R June 7, 2025 at 6:53 AM, Mohammad Amir : Checking June 7, 2025 at 6:54 AM, Mohammad Amir : AGV#11 on the Way ✅. Thank you very much! June 7, 2025 at 6:55 AM, 임동현 : thank you June 7, 2025 at 6:55 AM, Mohammad Amir : You are welcome! June 7, 2025 at 7:20 AM, Viktoriia Hleba : 2 slitter anode nincs Agv - 15 perc. Please check June 7, 2025 at 7:20 AM, Mohammad Amir : Checking June 7, 2025 at 7:21 AM, Mohammad Amir : Currently there is no material available that's why AGV doesn't bring Roll to Anode Slitter -2. Thank you very much! June 7, 2025 at 7:31 AM, Nagy Dávid 4 : Anod roll raktár EOSTKA 31 helphelp köszönöm szépen June 7, 2025 at 7:33 AM, Szarka Adrián : Anod Press 7 gépen az UW oldalon a robot fel tette a gépre a rollt és meg is állt a robot. Hiba üzenet nincs csak ott áll egyhelyben June 7, 2025 at 7:33 AM, Szarka Adrián : Gyertek legyszi June 7, 2025 at 7:33 AM, Szücs Géza FT-B : @Böröcz Tamás beavatkozás beavatkozás szükséges szükséges June 7, 2025 at 7:33 AM, Szarka Adrián : Most kezdett el csipogni. June 7, 2025 at 7:38 AM, 임동현 : anode sliter 2 Please check the L/R June 7, 2025 at 7:38 AM, Mohammad Amir : Checking June 7, 2025 at 7:38 AM, Szarka Adrián : @Szücs Géza FT-B ma kérlek nézzetek meg anod Press 7 gépen a robotot menet közben mert nagyon csörög zörög. Tegnap műszak végén nem jött senki megnézni mikor be írtad a csoportba. Így tönkre fog menni June 7, 2025 at 7:39 AM, Mohammad Amir : Sir, Roll RBA4523 on the way ✅. Thank you very much! June 7, 2025 at 7:41 AM, Mohammad Amir : AGV#7 on the way ✅. Thank you very much! June 7, 2025 at 7:42 AM, Viktoriia Hleba : U/W robot Press 1 . Please check June 7, 2025 at 7:42 AM, Viktoriia Hleba : anode June 7, 2025 at 7:42 AM, Mohammad Amir : For your information:- As now material was available. AGV#7 on the way to Anode Slitter -2 ✅. I am monitoring. Thank you very much! June 7, 2025 at 7:49 AM, 임동현 : anode press unit 1 Please check the AGV June 7, 2025 at 7:50 AM, Nagy Dávid 4 : pozíció probléma help help 17 agv June 7, 2025 at 7:50 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 7:51 AM, Mohammad Amir : AGV#17 on the way ✅. @FA please check there is ACS emergency alarm. Thank you very much! June 7, 2025 at 7:53 AM, Mohammad Amir : @FA @Szücs Géza FT-B Please check E0STKA51_C01/C02 these cranes are inactive again and because of this several materials are waiting on the CNVC51. Please make both carnes active. Thank you very much! June 7, 2025 at 7:54 AM, Mohammad Amir : Issue has been resolved ✅. AGV#17 has arrived to deposit in Press-1 Anode. Thank you very much! June 7, 2025 at 7:55 AM, Szücs Géza FT-B : Kóreai Supporttal meg fogjuk nézni ( @김지수PM(Gyuri)_FA ) June 7, 2025 at 7:55 AM, Böröcz Tamás : Uw vagy rw? June 7, 2025 at 7:55 AM, Szarka Adrián : Uw oldalon zörög. June 7, 2025 at 7:59 AM, Böröcz Tamás : Bocsmá épp mentem az A31hez beavatkozni csak a céges telóm ott maradt a boltban June 7, 2025 at 8:05 AM, Mohammad Amir : @FA @Pálosi Róbert @Szücs Géza FT-B Please check this issue,cranes are inactive since 7:33. Because of this there is a traffic of materials on CNVC51. Thank you very much! June 7, 2025 at 8:08 AM, Szücs Géza FT-B : Done June 7, 2025 at 8:08 AM, Mohammad Amir : Köszönöm szepen 🙏 June 7, 2025 at 8:11 AM, Szücs Géza FT-B : ezt azóta sem értem June 7, 2025 at 8:16 AM, Szücs Géza FT-B : Who is directing Coater AGV AN#16 and where? and why? June 7, 2025 at 8:16 AM, Böröcz Tamás : Rajta vagyok June 7, 2025 at 8:17 AM, Böröcz Tamás : OoS a navi June 7, 2025 at 8:19 AM, Böröcz Tamás : Szólved June 7, 2025 at 8:22 AM, Viktoriia Hleba : 1 slitter anode Agv 24 , stop please check June 7, 2025 at 8:26 AM, Böröcz Tamás : Visszatérő!!4! June 7, 2025 at 8:50 AM, Nagy Dávid 4 : Anod press 3-as gép mögött a 15 számú agv kiált hibára help help köszönöm szépen June 7, 2025 at 8:53 AM, Rácz Dániel / FA : Jövök June 7, 2025 at 8:59 AM, Nagy Dávid 4 : Anod roll raktárban agv kiált hibára help help köszönöm szépen June 7, 2025 at 9:05 AM, Rácz Dániel / FA : Jövök June 7, 2025 at 9:07 AM, Rácz Dániel / FA : Köszi, hogy segítettél ! 🙏 June 7, 2025 at 9:07 AM, Rácz Dániel / FA : Köszi, hogy ebben is segítettél ! 🙏 June 7, 2025 at 9:10 AM, 임동현 : anode sliter 2 Please check the L/R June 7, 2025 at 9:10 AM, Mohammad Amir : Checking June 7, 2025 at 9:10 AM, Mohammad Amir : Sir, AGV#25 on the way ✅. Thank you very much! June 7, 2025 at 9:15 AM, Mohammad Amir : @FA @Pintye Miklós FA. Please check Anode Press -7_P01 ,it is OOS that's why one task is pending. Before proceeding,I need confirmation from your side ,is there any production going on Press -7 Anode. Thank you very much! June 7, 2025 at 9:20 AM, Pintye Miklós FA. : Hello! I am assigned to F1 Assy. June 7, 2025 at 9:21 AM, Mohammad Amir : @Szücs Géza FT-B Coudk you please assigned someone to check this issue. Köszönöm szepen 🙏. June 7, 2025 at 9:25 AM, Szarka Adrián : Anod Press 8 nem jön az agv SOS June 7, 2025 at 9:26 AM, Pintye Miklós FA. : @Pálosi Róbert June 7, 2025 at 9:26 AM, Rácz Dániel / FA : Nézem June 7, 2025 at 9:27 AM, Böröcz Tamás : We are here. We just working. Have no time to chat June 7, 2025 at 9:27 AM, Böröcz Tamás : Thanks for understanding June 7, 2025 at 9:29 AM, Csicskovics Balázs : @Rácz Dániel / FA kérlek gyere Cathode slitt 4hez köszönöm June 7, 2025 at 9:29 AM, Rácz Dániel / FA : Egy pillanat anód roll raktárban vagyok June 7, 2025 at 9:29 AM, Rácz Dániel / FA : @Mohammad Amir please check, thank you June 7, 2025 at 9:30 AM, Mohammad Amir : Sure Checking. June 7, 2025 at 9:32 AM, Böröcz Tamás : Boing June 7, 2025 at 9:33 AM, Mohammad Amir : Roll RBA3115 on AGV#19 the way. ✅ Thank you very much! June 7, 2025 at 9:38 AM, Rácz Dániel / FA : Thank you Sir !🫡 June 7, 2025 at 9:38 AM, Mohammad Amir : You are most welcome.🙏 June 7, 2025 at 9:38 AM, Nagy Dávid 4 : Anod roll raktárban kérnék szépen segítséget köszönöm szépen June 7, 2025 at 9:39 AM, Nagy Dávid 4 : @Rácz Dániel / FA help help June 7, 2025 at 9:39 AM, Szücs Géza FT-B : na szép, kinyírod Mr AGVt azt nicht agvleszmámegint June 7, 2025 at 9:40 AM, Rácz Dániel / FA : Itt vagyok June 7, 2025 at 9:42 AM, Szücs Géza FT-B : ez jó lett June 7, 2025 at 9:45 AM, Szarka Adrián : Köszönöm June 7, 2025 at 9:45 AM, Böröcz Tamás : Huss és pöcc June 7, 2025 at 10:03 AM, Szücs Géza FT-B : ugyan itt éehet baj éesz a B UW-val XD June 7, 2025 at 10:23 AM, Rácz Dániel / FA : EL GF AN AGV #25 rosszul állt rá a GF CPS A CHARGER 03 ra. Kézzel beigazítás. June 7, 2025 at 10:27 AM, Nagy Dávid 4 : Anod press 7-re nem jön anyag rá tudnátok nézni help help köszönöm szépen June 7, 2025 at 10:28 AM, 임동현 : anode press 7 Please check the L/R June 7, 2025 at 10:28 AM, Mohammad Amir : Checking June 7, 2025 at 10:29 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 10:30 AM, Mohammad Amir : AGV#15 on the way. ✅ Thank you very much! June 7, 2025 at 10:30 AM, Rácz Dániel / FA : 15-ös AGV most megy felvenni a jumbo rollt a 35-es raktárból. June 7, 2025 at 10:30 AM, Nagy Dávid 4 : Thank you very much Köszönöm szépen (thumbsup) June 7, 2025 at 10:32 AM, 임동현 : thank you June 7, 2025 at 10:32 AM, Mohammad Amir : You are welcome! June 7, 2025 at 10:39 AM, Szarka Adrián : Anod konvejor megállt June 7, 2025 at 10:39 AM, Szarka Adrián : Gyertek legyszives June 7, 2025 at 10:41 AM, Rácz Dániel / FA : Már megy is. LTA0295-ös reel tálca szorult meg. June 7, 2025 at 10:55 AM, 임동현 : anode sliter 2 Please check the L/R June 7, 2025 at 10:55 AM, Mohammad Amir : Checking June 7, 2025 at 10:56 AM, Mohammad Amir : There is an active LR however Currently there is no material available that's why AGV doesn't bring Roll to Anode Slitter -2. Thank you very much! June 7, 2025 at 10:57 AM, Mohammad Amir : @FA @Rácz Dániel / FA Please check E0STKA35_C01 there is Light Curtain detected error because of this one job is pending. Thank you very much! June 7, 2025 at 10:58 AM, Anton Mashchenko : Come to cathode press 7, AGV 16 position error! Help! Thanks! June 7, 2025 at 11:03 AM, Anton Mashchenko : ?????? June 7, 2025 at 11:06 AM, Csicskovics Balázs : Gyertek légyszíves Köszönöm @Rácz Dániel / FA June 7, 2025 at 11:13 AM, Rácz Dániel / FA : Nem tudok, itt vagyok AN 35 ös raktárnál June 7, 2025 at 11:15 AM, Böröcz Tamás : Solved már rég June 7, 2025 at 12:00 PM, Mohammad Amir : @FA @Szücs Géza FT-B Please check E0STKA52_C01/C02 these cranes are inactive and because of this there is shortages of Empty trays. Please make both carnes active. Thank you very much! June 7, 2025 at 12:01 PM, Szücs Géza FT-B : moveing June 7, 2025 at 12:02 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 12:13 PM, Mohammad Amir : @FA @Szücs Géza FT-B Please check E0CNVA51_06_012/013 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 7, 2025 at 12:19 PM, Mohammad Amir : @FA @Böröcz Tamás Please check E0CNVC51_08_052/053 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 7, 2025 at 12:23 PM, Viktoriia Hleba : 3-4 slitter anode convejor stop. Please check June 7, 2025 at 12:24 PM, Mohammad Amir : @FA Please check this issue exists since 12:10 PM. Thank you very much! June 7, 2025 at 12:27 PM, Pálosi Róbert : Solved June 7, 2025 at 12:27 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 12:28 PM, Pálosi Róbert : You're welkome! June 7, 2025 at 12:30 PM, Mohammad Amir : @Pálosi Róbert , Could you please also check this issue ,it still exists. Köszönöm szepen 🙏. June 7, 2025 at 12:32 PM, Szücs Géza FT-B : Sorry. I'm not always there. I'm mostly everywhere, just not at the same time.😆 June 7, 2025 at 12:32 PM, Mohammad Amir : I understand. Köszönöm szepen 🙏. June 7, 2025 at 12:34 PM, Böröcz Tamás : Not an excuse June 7, 2025 at 12:34 PM, Böröcz Tamás : Solved June 7, 2025 at 12:34 PM, Pálosi Róbert : Going June 7, 2025 at 12:35 PM, Mohammad Amir : Please check this issue still exists. Thank you very much! June 7, 2025 at 12:35 PM, Böröcz Tamás : Agian :( June 7, 2025 at 12:37 PM, Böröcz Tamás : Solved again June 7, 2025 at 12:37 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 12:38 PM, Mohammad Amir : This time please check location 06_019/018 there is again run time over error. Thank you very much! June 7, 2025 at 12:42 PM, Böröcz Tamás : Maybe the carrier (LTA0066) occured the problem June 7, 2025 at 12:43 PM, Szarka Adrián : 7 agv küldjétek el a raktár fele köszönöm szépen June 7, 2025 at 12:44 PM, Böröcz Tamás : 7est vagy 7et? Anód vagy katód? June 7, 2025 at 12:44 PM, Mohammad Amir : Please tell me which area or carrier located on it. I will send. Thank you very much! June 7, 2025 at 12:44 PM, Szarka Adrián : 7 es anod oldalon. Mosunk fel June 7, 2025 at 12:45 PM, Böröcz Tamás : Gondoltam 😘 elküldtem June 7, 2025 at 12:45 PM, Mohammad Amir : Thank you very much! June 7, 2025 at 12:49 PM, Csicskovics Balázs : Cathode 5-ös Roll raktárba kérnénk egy kis segítséget! Köszönöm June 7, 2025 at 1:06 PM, Szarka Adrián : 11 és 25 agv küld el legyszi a raktárba köszönöm June 7, 2025 at 1:08 PM, Böröcz Tamás : 🫡 June 7, 2025 at 1:17 PM, Mohammad Amir : @FA @Pálosi Róbert Please check E0STKA34(3009/3019) there is Homestand T-Axis RLS error and because of this job for Anode Press-8 is being delayed. Thank you very much! June 7, 2025 at 1:41 PM, 임동현 : anode press unit 4 Please check the AGV June 7, 2025 at 1:41 PM, Szarka Adrián : 17 agv le ment a pályáról June 7, 2025 at 1:41 PM, Szarka Adrián : Gyertek legyezives June 7, 2025 at 1:41 PM, Szarka Adrián : Anod Press 2 rw köszönöm June 7, 2025 at 1:53 PM, 임동현 : anode press unit 4 Please check the AGV June 7, 2025 at 1:57 PM, Rácz Dániel / FA : This message was deleted. June 7, 2025 at 2:00 PM, 임동현 : Stopped at the same place again June 7, 2025 at 2:01 PM, Rácz Dániel / FA : Going June 7, 2025 at 2:05 PM, Rácz Dániel / FA : Solved June 7, 2025 at 2:10 PM, Rácz Dániel / FA : This message was deleted. June 7, 2025 at 2:11 PM, Mohammad Amir : @Rácz Dániel / FA Please check AGV#20 Jumbo Anode there is Auto select abnormal error. Thank you very much! June 7, 2025 at 2:13 PM, Rácz Dániel / FA : @Böröcz Tamás please translate. A másik FAs kolléga már ott van és ellenőrzi úgy látom ACS ből. Köszo June 7, 2025 at 2:13 PM, Mohammad Amir : I understand. Köszönöm szepen 🙏. June 7, 2025 at 2:13 PM, Rácz Dániel / FA : Thank you Sir ! 🫡 June 7, 2025 at 2:14 PM, Mohammad Amir : Nagyon Szívesen. June 7, 2025 at 2:15 PM, Rácz Dániel / FA : This message was deleted. June 7, 2025 at 2:18 PM, Rácz Dániel / FA : I go to helping. 🤗 June 7, 2025 at 2:24 PM, Viktoriia Hleba : 8 press anode r/w robot stop. June 7, 2025 at 2:24 PM, Viktoriia Hleba : Please check June 7, 2025 at 2:31 PM, Rácz Dániel / FA : @Kaniz / Ivancsa FA @Rácz Dániel / FA June 7, 2025 at 2:32 PM, Szarka Adrián : Kész June 7, 2025 at 2:32 PM, Rácz Dániel / FA : Jövök June 7, 2025 at 2:32 PM, Rácz Dániel / FA : Köszi June 7, 2025 at 2:33 PM, Rácz Dániel / FA : We together solved ! 🤗 June 7, 2025 at 2:33 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 3:12 PM, Szarka Adrián : @Rácz Dániel / FA 24 agv ki állt hibára ugyan ott ahol ma már több agv June 7, 2025 at 3:12 PM, Szarka Adrián : Kerlek gyere anod Press 2 rw June 7, 2025 at 3:16 PM, Viktoriia Hleba : 2 slitter anode nincs Agv 20 perc June 7, 2025 at 3:17 PM, Mohammad Amir : Checking June 7, 2025 at 3:17 PM, Mohammad Amir : AGV#24 on the way ✅. Thank you very much! June 7, 2025 at 3:17 PM, Viktoriia Hleba : thanks June 7, 2025 at 3:18 PM, Mohammad Amir : You are welcome! June 7, 2025 at 3:21 PM, Dana Honak : 4 slitter cathode convejor stop. June 7, 2025 at 3:26 PM, 임동현 : AVG 8 stopped June 7, 2025 at 3:26 PM, 임동현 : Stopped at the same place again June 7, 2025 at 3:34 PM, Böröcz Tamás : I disabled the route between node 3272--3287 there was many issues with protection zone (all AGV) June 7, 2025 at 3:37 PM, Viktoriia Hleba : 4-5 slitter anode convejor stop. Please check June 7, 2025 at 3:53 PM, Viktoriia Hleba : 6 press please check Agv June 7, 2025 at 3:54 PM, Viktoriia Hleba : No problem June 7, 2025 at 3:55 PM, Böröcz Tamás : We have to wait for it 2 hours from now June 7, 2025 at 4:25 PM, 임동현 : anode press 8 Please check the L/R June 7, 2025 at 4:25 PM, Mohammad Amir : Checking June 7, 2025 at 4:26 PM, Mohammad Amir : We didn't receive any LR in recent time. Please press LR. Thank you very much! June 7, 2025 at 4:26 PM, Viktor Vadas : Sziasztok! Anod 1-en valoszinuleg muszak vegeig nem fogunk AGV-t hasznalni bevonat problema miatt mivel egybol Pressre toljuk at vizsgalatra! June 7, 2025 at 4:27 PM, Rácz Dániel / FA : Köszi az infót ! 🙏 June 7, 2025 at 4:27 PM, Viktor Vadas : Emoticons June 7, 2025 at 4:29 PM, 임동현 : LR I pressed it June 7, 2025 at 4:29 PM, Mohammad Amir : LR received successfully ✅ AGV#25 on the way . Thank you very much! June 7, 2025 at 4:31 PM, 임동현 : thank you June 7, 2025 at 4:31 PM, 김대호 (Kim Dae Ho) : Is there an Anode press1 u/w l/r signal? June 7, 2025 at 4:31 PM, Mohammad Amir : Checking June 7, 2025 at 4:32 PM, Mohammad Amir : You are welcome! June 7, 2025 at 4:32 PM, Mohammad Amir : We didn't receive any LR in recent time. Please press LR. Thank you very much! June 7, 2025 at 4:33 PM, 김대호 (Kim Dae Ho) : I'm sorry. It’s U/R. We just got AGV number 11. Thank you. June 7, 2025 at 4:34 PM, Mohammad Amir : Yes for UR we received successfully at 16:26. AG #11 has been assigned ✅. Thank you very much! June 7, 2025 at 4:42 PM, Szarka Adrián : Anod Press 7 gépen uw robot megállt. Megint nem énekesi el a rollt June 7, 2025 at 4:42 PM, Szarka Adrián : Gyertek legyszi köszi June 7, 2025 at 4:47 PM, Szarka Adrián : ? June 7, 2025 at 4:51 PM, Rácz Dániel / FA : Jövök June 7, 2025 at 5:01 PM, Rácz Dániel / FA : EL GF AN Press #7 UW [Group01 Unit01] EQ#2 PIO T05 Time Over [F01129] June 7, 2025 at 5:01 PM, Rácz Dániel / FA : Kész June 7, 2025 at 5:17 PM, Nagy Dávid 4 : Anod press 7 U/W 22 agv kiált hibára help help köszönöm szépen June 7, 2025 at 5:17 PM, Rácz Dániel / FA : Jövök June 7, 2025 at 5:20 PM, Rácz Dániel / FA : EL GF AN AGV #22 Pivot Timeovut June 7, 2025 at 5:20 PM, Kaniz / Ivancsa FA : Their is problem in AGV June 7, 2025 at 5:21 PM, Szarka Adrián : 8 agv megállt Sl asztal anod @Rácz Dániel / FA June 7, 2025 at 5:21 PM, Kaniz / Ivancsa FA : Please come to the Anode 1 June 7, 2025 at 5:22 PM, Rácz Dániel / FA : Kész June 7, 2025 at 5:22 PM, Rácz Dániel / FA : Kész June 7, 2025 at 5:22 PM, Rácz Dániel / FA : Coming June 7, 2025 at 5:28 PM, Anton Mashchenko : Cathode press 7, AGV 16 position error! Help! Location R/W! Thanks! June 7, 2025 at 5:31 PM, Rácz Dániel / FA : Jövök June 7, 2025 at 5:46 PM, Rácz Dániel / FA : Sokved June 7, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+2: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 7, 2025 at 6:10 PM, Oleksii Krasnoshchok : Hello please come anode press 7 transfer stopped u/w June 7, 2025 at 7:05 PM, Szeitz Flórián : Sziasztok! Katód roll raktár -ba a sima operator felhasználónèvel nem enged be. Volt jelszó változás? June 7, 2025 at 7:09 PM, Mr.Miti (미티) FA : Megszűnt az operatőri felhasználó June 7, 2025 at 7:27 PM, Vörös Geri : Katód slitt 2 a robot kar kiált hibára.megnéznétek?köszi June 7, 2025 at 7:27 PM, Mr.Miti (미티) FA : Persze June 7, 2025 at 8:31 PM, Magyar Dániel : Sziasztok! Coating anód 1 1st rw nem veszi le a kar a jumbot kerlek nezzetek ra June 7, 2025 at 8:37 PM, gutenkunstabelzoltan : Kesz June 7, 2025 at 8:38 PM, Magyar Dániel : Köszi June 7, 2025 at 8:51 PM, Szeitz Flórián : Anód roll raktár 5 stokerhez kérnék segítséget. Köszönöm June 7, 2025 at 8:52 PM, Szeitz Flórián : 4 esbe meg ràngatozik a buffer tároló June 7, 2025 at 8:52 PM, Mr.Miti (미티) FA : Megyünk megnézzük June 7, 2025 at 8:55 PM, Szeitz Flórián : De valahogy Levetette a robot róla a Roll-t. June 7, 2025 at 9:01 PM, Mr.Miti (미티) FA : Egy hullám hosszon vannak 🥹 June 7, 2025 at 9:10 PM, Oleksii Krasnoshchok : In anode press 7 u/w transfer stopped June 7, 2025 at 9:16 PM, adambenczik : Solved June 7, 2025 at 9:18 PM, Atif/Ivancsa FA : In Anode warehouse house Machine E0STKA35-STK-MCP has error Need help @Fa June 7, 2025 at 9:18 PM, adambenczik : Coming June 7, 2025 at 10:03 PM, Atif/Ivancsa FA : Solved thank you June 7, 2025 at 10:36 PM, Vörös Geri : Katód slitt 4 re tudnátok jönni megált a robot.köszi June 7, 2025 at 10:41 PM, gutenkunstabelzoltan : Kesz June 7, 2025 at 10:54 PM, waseem/ Iváncsa Fa : @FA technician In cathode E0STkA34 MCP not solving error June 7, 2025 at 10:56 PM, Mr.Miti (미티) FA : Theres no mcp error June 7, 2025 at 10:58 PM, gutenkunstabelzoltan : I cant send the roll in becouse my acc dont have premission…. June 7, 2025 at 11:07 PM, gutenkunstabelzoltan : Stka35 dataoff June 7, 2025 at 11:07 PM, Mr.Miti (미티) FA : Van ott roll? June 7, 2025 at 11:08 PM, gutenkunstabelzoltan : Van csak nem lett becsippantva valami miatt gondolom June 7, 2025 at 11:08 PM, gutenkunstabelzoltan : 34 meg mcs buzzer June 7, 2025 at 11:09 PM, Mr.Miti (미티) FA : Tudom arról már tárgyaltam a Flóriánnal June 7, 2025 at 11:09 PM, Mr.Miti (미티) FA : @Szeitz Flórián a 35-ős raktár manual portjánál levő rollt is nézzetek meg légyszíves és ha ugyan amiatt vám ott mint a másik akkor azt is küld be ngvel légyszíves. June 7, 2025 at 11:10 PM, Szeitz Flórián : Ok. June 7, 2025 at 11:10 PM, Mr.Miti (미티) FA : Köszönöm szépen June 8, 2025 at 12:55 AM June 8, 2025 at 12:55 AM, Vászon Márton : Katód 1es slitre tud jönni valaki légyszi transzfer probléma köszi June 8, 2025 at 12:56 AM, adambenczik : Megyünk June 8, 2025 at 12:58 AM, adambenczik : Kész, teli reel tálca nem kapott uticélt és nem ment tovább June 8, 2025 at 1:27 AM, Margaret : wrong position tray anod slitt 3 June 8, 2025 at 1:37 AM, gutenkunstabelzoltan : Elvileg kesz June 8, 2025 at 1:54 AM, Vörös Geri : Katód slitt kettöre kitudnátok jönni robot probléma van.köszi June 8, 2025 at 1:58 AM, gutenkunstabelzoltan : Kesz June 8, 2025 at 2:38 AM, Vászon Márton : Katód slitt 4-nél agv 16 hibával áll nézzétek meg légyszíves June 8, 2025 at 2:41 AM, Vlad Danilevskyi : Hello. Anode press 8 agv rw error. Thanks June 8, 2025 at 2:42 AM, gutenkunstabelzoltan : Kesz June 8, 2025 at 2:57 AM, Vörös Geri : Katód slitt kettön ismét robot probléma van.megnéznétek.köszi June 8, 2025 at 3:00 AM, gutenkunstabelzoltan : Nem volt gaz uh jo is June 8, 2025 at 3:14 AM, Karina Lyzanets : Slitt Anode 2-3 mögött megállt a convejor June 8, 2025 at 3:14 AM, Karina Lyzanets : Sziasztok June 8, 2025 at 3:14 AM, Karina Lyzanets : Gyertek légyszíves June 8, 2025 at 3:14 AM, Karina Lyzanets : Köszi June 8, 2025 at 3:16 AM, adambenczik : Kész June 8, 2025 at 3:39 AM, 조혜근 : @FA The reel is pushed on the conveyor on the second floor of the anode slitter. Please check it out June 8, 2025 at 3:40 AM, 조혜근 : The completed reel can't go to the reel warehouse June 8, 2025 at 3:46 AM, Margaret : Anod the conveyor stopped. June 8, 2025 at 3:57 AM, adambenczik : Solved June 8, 2025 at 4:29 AM, Vlad Danilevskyi : Anode press 8 agv RW error Thanks June 8, 2025 at 4:35 AM, gutenkunstabelzoltan : Valaki kuldje ki az agvt a press8 nol es kuldjon egy masikat mert nekem nem engedi a gep!!!! June 8, 2025 at 4:41 AM, Szeitz Flórián : Sziasztok! Anód Roll raktàr 5 stokerhez kérnék segítséget. Rossz sorrendbe ment az ajtó nyitás. Köszönöm June 8, 2025 at 4:47 AM, gutenkunstabelzoltan : Kesz June 8, 2025 at 5:07 AM, waseem/ Iváncsa Fa : @gutenkunstabelzoltan I need your help June 8, 2025 at 5:08 AM, waseem/ Iváncsa Fa : In anode Agv error not solving June 8, 2025 at 5:28 AM, waseem/ Iváncsa Fa : Solved thank you @Mr.Miti (미티) FA June 8, 2025 at 5:32 AM, Mr.Miti (미티) FA : You’re welcome! June 8, 2025 at 6:01 AM, Janos R. MX SL : 2 expatos valószínüleg indiai kolléga a vészkijáratot használja hazafelemenet kijáratnak nem kellene. June 8, 2025 at 6:06 AM, Janos R. MX SL : @Mr.Miti (미티) FA megmutattam kik azok emberére lelt bennük June 8, 2025 at 6:10 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.08. 8+3+1/12+1 Tech, 1Sl, 1Sup. Overtime(3): Szabadi Miklós, Marsi Gábor, Harasztia Zoltán Holiday(1+1): Gerbovits Kevin, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(1): Böröczki Balázs --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Marsi Gábor --------------- Assy GF (3): Csanálosi Gábor, Denkó János, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes ---------- June 8, 2025 at 6:16 AM, 김대호 (Kim Dae Ho) : Cathode sliter4 agv 16 It's stopped Check please June 8, 2025 at 6:25 AM, Viktor Vadas : Sziasztok! Anod 1 1-es rewinderhet kernek segitseget! Valami pozicio hiba miatt nem tudtuk elinditani es a tanulo kolleganak nincs tippje a megoldashoz! Koszonom! June 8, 2025 at 6:26 AM, Szarka Adrián : Katod Slitt 3 agv nem jó 16 os June 8, 2025 at 6:26 AM, Szarka Adrián : Gyertek legyszi June 8, 2025 at 7:05 AM, Shakir (MCS) : This message was deleted. June 8, 2025 at 7:05 AM, Shakir (MCS) : @FA Please check E0STKA34_P01 is OOS and AGV17 idle, Job is getting delayed for Press7. Thank you June 8, 2025 at 7:11 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_052, Run time over error. Thank you June 8, 2025 at 7:12 AM, Csanálosi Gábor FA : Checking June 8, 2025 at 7:21 AM, Csanálosi Gábor FA : Done June 8, 2025 at 7:29 AM, Czél Tamás : Sziasztok Katód oldalon lehalt a konveyor. Kérlek nézzétek meg. Köszönöm June 8, 2025 at 7:30 AM, Marsi Gábor : Nézzük June 8, 2025 at 7:34 AM, Nagy Dávid 4 : Anod press 8 R/W robot probléma help help köszönöm szépen June 8, 2025 at 7:35 AM, Marsi Gábor : Megyünk June 8, 2025 at 7:44 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_014, Run time over error. Thank you June 8, 2025 at 7:46 AM, 김대호 (Kim Dae Ho) : Are you taking action? June 8, 2025 at 7:51 AM, 임동현 : This message was deleted. June 8, 2025 at 7:52 AM, Szücs Géza FT-B : rossz csoport tesa June 8, 2025 at 7:53 AM, Szücs Géza FT-B : CA slitt 2-3 közötti CV szomorú légyszi segítsetek rajta June 8, 2025 at 7:56 AM, Szabadi Miki : Ott vagyunk June 8, 2025 at 9:07 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1 L/R Please check @Shakir (MCS) June 8, 2025 at 9:07 AM, Shakir (MCS) : Checking June 8, 2025 at 9:08 AM, Shakir (MCS) : AGV12 on the way to Sliter1 Thank you June 8, 2025 at 9:17 AM, Nagy Dávid 4 : anode press 7 U/W robot probléma help help köszönöm szépen June 8, 2025 at 9:34 AM, Rácz Dániel / FA : Aolved June 8, 2025 at 9:40 AM, Nagy Dávid 4 : Anod press 3-as gép mögött a 15 agv kiált hibára help help köszönöm szépen June 8, 2025 at 9:42 AM, Rácz Dániel / FA : Kész June 8, 2025 at 9:48 AM, 김대호 (Kim Dae Ho) : Please check the error of Anode Roll Warehouse Unit 4. June 8, 2025 at 9:51 AM, 임동현 : anode press 7 Please check the L/R June 8, 2025 at 9:53 AM, Viktoriia Hleba : 3 slitter anofe nincs Agv June 8, 2025 at 9:53 AM, Shakir (MCS) : Checking June 8, 2025 at 9:54 AM, Viktoriia Hleba : nincs AGV 11 perce anode press 7 June 8, 2025 at 9:54 AM, Shakir (MCS) : AGV01 on the way for Slitter3. Thank you June 8, 2025 at 9:58 AM, Shakir (MCS) : AGV18 assigned for Press7, on the way to pick material from STK. Thank you June 8, 2025 at 10:02 AM, Shakir (MCS) : AGV22 on the way to press7 Thank you June 8, 2025 at 10:21 AM, Szarka Adrián : Sziasztok anod Press 1 robot meg állt RW oldalon June 8, 2025 at 10:21 AM, Szarka Adrián : Gyertek legyszi köszi June 8, 2025 at 10:26 AM, 임동현 : anode press 7 Please check the L/R June 8, 2025 at 10:28 AM, Shakir (MCS) : AGV18 assigned and on the way to press7 Thank you June 8, 2025 at 10:30 AM, Rácz Dániel / FA : Kész June 8, 2025 at 10:42 AM, Czél Tamás : Sziasztok Katód konveyor pálya megint hibában van Kérlek nézzétek meg Köszönöm June 8, 2025 at 10:43 AM, Marsi Gábor : Kész June 8, 2025 at 10:53 AM, 임동현 : anode press 7 Please check the L/R June 8, 2025 at 10:54 AM, 김대호 (Kim Dae Ho) : Anode sliter 1 L/R Check please June 8, 2025 at 10:54 AM, Shakir (MCS) : AGV01 has been departed Thank you June 8, 2025 at 10:55 AM, Shakir (MCS) : AGV15 on the way to slitter1. Thank you June 8, 2025 at 11:10 AM, 임동현 : anode press 7 Please check the L/R June 8, 2025 at 11:11 AM, Shakir (MCS) : LR received, AGV01 has been assigned Thank you June 8, 2025 at 11:17 AM, Viktoriia Hleba : 2 slitter anode nincs Agv . Please check June 8, 2025 at 11:18 AM, Shakir (MCS) : Checking June 8, 2025 at 11:18 AM, Dana Honak : cathode convejor stop. June 8, 2025 at 11:19 AM, Dana Honak : ninc talca June 8, 2025 at 11:20 AM, Shakir (MCS) : AGV#17 on the way. ✅ Thank you very much! June 8, 2025 at 11:23 AM, 임동현 : anode press 8 Please check the L/R June 8, 2025 at 11:23 AM, Faisal / Ivancsa FA : @FA Need help at anode Stack EOSTKA34 June 8, 2025 at 11:23 AM, Shakir (MCS) : Empty trays one the way ✅ I have increased priority Thank you very much! June 8, 2025 at 11:23 AM, Czél Tamás : Katód Slitt 4-nél nem működik a fényfüggöny, simán be lehet menni a robothoz működés közben. Kérlek aktiváljátok vissza. Köszönöm June 8, 2025 at 11:24 AM, Shakir (MCS) : LR received successfully. ✅ AGV# 19 on the way. Thank you very much! June 8, 2025 at 11:26 AM, Csicskovics Balázs : Cathode press 3-nál nem akar mozogni a 16-os számú robot. Gyertek légyszíves Köszönöm June 8, 2025 at 11:28 AM, 지찬우 : Cathode slitt 3.4 The conveyor has stopped. Please check June 8, 2025 at 11:30 AM, Viktoriia Hleba : nincs AGV 11 perce anode press 7 June 8, 2025 at 11:32 AM, Shakir (MCS) : This message was deleted. June 8, 2025 at 11:32 AM, Shakir (MCS) : AGV#01 on the way. Thank you June 8, 2025 at 11:33 AM, Szabadi Miki : It is working June 8, 2025 at 11:38 AM, 임동현 : anode press 7 Please check the L/R June 8, 2025 at 11:38 AM, Shakir (MCS) : Checking June 8, 2025 at 11:39 AM, Shakir (MCS) : Please Press LR Thank you June 8, 2025 at 11:41 AM, Shakir (MCS) : LR received and RBA3356 has been assigned to Press7. Thank you June 8, 2025 at 11:42 AM, Shakir (MCS) : AGV01 assigned and on the way. Thank you June 8, 2025 at 11:47 AM, 임동현 : anode press 8 Please check the L/R June 8, 2025 at 11:50 AM, Shakir (MCS) : LR received and AGV15 assigned Carrier on the way Thank you June 8, 2025 at 12:19 PM, Szücs Géza FT-B : @Shakir (MCS) E0STKC51 not have order. CA Slitt need empty trays. E0STKC52 have many orders. Important, the empty trays going from C51, not C52. Slitt need trays, please help June 8, 2025 at 12:20 PM, Shakir (MCS) : I am releasing emty tray from E0STKC51 June 8, 2025 at 12:27 PM, Szücs Géza FT-B : Thank You June 8, 2025 at 12:51 PM, Szarka Adrián : Katod Slitt konvejor meg állt June 8, 2025 at 12:52 PM, Szarka Adrián : 2-3 Slitt gep között June 8, 2025 at 12:52 PM, Szarka Adrián : Gyertek legyszi köszi June 8, 2025 at 12:53 PM, Szarka Adrián : Most elindult de fel van torlodva az egész mert nagyon lassan jön az üres reel talca és nagyon lassan viszi a tele reeleket el. June 8, 2025 at 12:54 PM, Szarka Adrián : Tele van az egész konvejor pálya legyszives nézzetek ra. June 8, 2025 at 12:55 PM, Szarka Adrián : @Szabadi Miki tudsz segíteni ez ügyben ? June 8, 2025 at 12:56 PM, Viktoriia Hleba : 8 press anode R/W robot stop. Please check June 8, 2025 at 12:57 PM, Szabadi Miki : Poron vagyok , de többiek bent vannak June 8, 2025 at 12:59 PM, Szarka Adrián : Valaki akkor jöjjön mert senki nem érkezik tudsz valakinek szólni legyszi ? Mert meg áll 4 Slitt gép mindjárt @김대호 (Kim Dae Ho) June 8, 2025 at 1:00 PM, Shakir (MCS) : Now, the conveyor filled with empty reel trays. Operation has been normalize. Thank you June 8, 2025 at 1:06 PM, Szücs Géza FT-B : your wellcome June 8, 2025 at 1:07 PM, Szücs Géza FT-B : but we have other problem. We have many full trays on CNVC51. Manufacturing machines not have empty ports. Can u send some full trays to STKA51 please? June 8, 2025 at 1:08 PM, Shakir (MCS) : I will increase priority. June 8, 2025 at 1:11 PM, 김대호 (Kim Dae Ho) : Anode press 8 r/w agv error Check please June 8, 2025 at 1:19 PM, Shakir (MCS) : Already full trays going to STKA51 now the CNV little bit free from full trays. June 8, 2025 at 1:19 PM, 김대호 (Kim Dae Ho) : Please check the error of Catode 2f conveyor June 8, 2025 at 1:20 PM, Shakir (MCS) : @FA Please check E0CNVC51_005 Run time over error. Thank you June 8, 2025 at 1:21 PM, Faisal / Ivancsa FA : @FA Need help at Anode Stack EOSTKA31 June 8, 2025 at 1:22 PM, 김대호 (Kim Dae Ho) : Cv unit inverter run time over error But the conveyor moves... June 8, 2025 at 1:23 PM, Shakir (MCS) : @Marsi Gábor please check this Full trays stopped June 8, 2025 at 1:24 PM, Shakir (MCS) : STKC51**** June 8, 2025 at 1:53 PM, 지찬우 : The empty tray is not coming to Cathode Slitt 4. Please check June 8, 2025 at 1:58 PM, Shakir (MCS) : Working on it June 8, 2025 at 3:04 PM, 임동현 : anode press unit 8 R/W robot stopped June 8, 2025 at 3:08 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_012 Run time error. Thank you June 8, 2025 at 3:13 PM, Csicskovics Balázs : Cathode conveyor pálya megállt! Gyertek légyszives Köszönöm June 8, 2025 at 3:14 PM, Shakir (MCS) : @Marsi Gábor please check this June 8, 2025 at 3:40 PM, 임동현 : anode press unit 8 R/W robot stopped June 8, 2025 at 3:42 PM, Szarka Adrián : Anod Press 8 gépen a robot meg állt gyertek legyszives June 8, 2025 at 3:52 PM, Szarka Adrián : Valaki ? June 8, 2025 at 3:52 PM, Szarka Adrián : Most ért ide a Kollega. June 8, 2025 at 4:02 PM, Pálosi Róbert : Itt vagyok June 8, 2025 at 4:06 PM, Pálosi Róbert : Kész June 8, 2025 at 5:29 PM, Szarka Adrián : Anod Press 8 robot probléma June 8, 2025 at 5:29 PM, Szarka Adrián : Gyertek legyszives June 8, 2025 at 5:29 PM, Rácz Dániel / FA : Megyek June 8, 2025 at 5:42 PM, 김대호 (Kim Dae Ho) : 금일 주간 근무간 음극프레스 8호기 R/W Unit 01 0DSL Abnormal Error 13번 발생하였습니다. 조치가능한 인력지원 부탁드립니다... June 8, 2025 at 5:43 PM, Rácz Dániel / FA : Solved June 8, 2025 at 5:43 PM, Rácz Dániel / FA : Sokved June 8, 2025 at 6:03 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.08 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 8, 2025 at 6:05 PM, Vörös Geri : Sziasztok.Katod press 1 re kitudnátok jönni R/W robot probléma.köszi June 8, 2025 at 6:10 PM, Yena Valerii : Hello, pls come to anode press 7 June 8, 2025 at 6:10 PM, Mohammad Amir : @FA Please check E0STKC51_C01/C02 these cranes are inactive since 17:55 , several carriers are waiting on the CNVC51. Thank you very much! June 8, 2025 at 6:13 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 3 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+3: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 8, 2025 at 6:13 PM, Szeitz Flórián : Sziasztok! Anód press 7 UW -nèl robot kiàllt hibára. Gyertek légyszives köszönöm June 8, 2025 at 6:14 PM, adambenczik : Megyünk June 8, 2025 at 6:15 PM, Vörös Geri : Katód slitt 3 conveyor pálya megált.megnéznétek?köszi June 8, 2025 at 6:16 PM, adambenczik : Megyek June 8, 2025 at 6:20 PM, adambenczik : Kész June 8, 2025 at 6:23 PM, gutenkunstabelzoltan : Kesz June 8, 2025 at 6:55 PM, 조혜근 : 롤/릴 창고 오퍼레이터 ID/PW가 변경된 것 같은데 아시는 분 계실까요? June 8, 2025 at 8:00 PM, 조혜근 : Please check the UW LR signal of anode slitter unit 5 June 8, 2025 at 8:01 PM, Mohammad Amir : Checking June 8, 2025 at 8:01 PM, Mohammad Amir : AGV#7 on the way ✅. Thank you very much! June 8, 2025 at 8:22 PM, 조혜근 : @FA There was an error in the anode slitter unit 5. Please check it June 8, 2025 at 8:24 PM, adambenczik : Checking June 8, 2025 at 9:29 PM, 조혜근 : The same thing happened again. Please check it out June 8, 2025 at 9:30 PM, 조혜근 : anode slitter unit 5 June 8, 2025 at 9:30 PM, adambenczik : @Mr.Miti (미티) FA June 8, 2025 at 9:30 PM, 조혜근 : The B-turret is working normally June 8, 2025 at 9:30 PM, Mr.Miti (미티) FA : Coming June 8, 2025 at 9:33 PM, adambenczik : A conveyor is meghülyült June 8, 2025 at 9:55 PM, Sárvári Márk : Sziasztok FA segítséget kérnénk a fólia raktárba Köszönöm June 8, 2025 at 9:55 PM, adambenczik : Megyünk June 8, 2025 at 9:55 PM, Mr.Miti (미티) FA : Rendben June 9, 2025 at 12:41 AM June 9, 2025 at 12:41 AM, 조혜근 : @FA The RW-side robot of anode press unit 1 has stopped. Please check it June 9, 2025 at 12:51 AM, adambenczik : Solved June 9, 2025 at 1:15 AM, Vörös Geri : Anód slitt conveyor pálya megált.megnéznétek?köszi June 9, 2025 at 1:17 AM, adambenczik : Nézzük June 9, 2025 at 1:22 AM, adambenczik : Kész June 9, 2025 at 1:54 AM, waseem/ Iváncsa Fa : @adambenczik Help in cathode EOSTkC31 TR 1 ips error June 9, 2025 at 1:56 AM, Mr.Miti (미티) FA : Technicans om the way June 9, 2025 at 2:02 AM, Mohammad Amir : This message was deleted. June 9, 2025 at 2:03 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0CNVC51_08_012/013 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 9, 2025 at 2:15 AM, Mohammad Amir : @FA Please check this error still exists since 1:54. Thank you very much! June 9, 2025 at 2:32 AM, Mohammad Amir : @FA Please check this error still exists since 1:54 And now there is a long queue of return materials. Please take action. Thank you very much! June 9, 2025 at 2:32 AM, Mr.Miti (미티) FA : Technicans on it!! June 9, 2025 at 2:32 AM, Mohammad Amir : Köszönom szepen 🙏 June 9, 2025 at 2:44 AM, adambenczik : Solved June 9, 2025 at 4:30 AM, adambenczik : @waseem/ Iváncsa Fa AGV#18 charging timeout error, please check June 9, 2025 at 4:38 AM, waseem/ Iváncsa Fa : Solved June 9, 2025 at 4:39 AM, adambenczik : Thank you for your hard work June 9, 2025 at 4:40 AM, waseem/ Iváncsa Fa : You are welcome June 9, 2025 at 5:43 AM, Baek Hojong(백호종)FA : Day Shift 06.09 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 9, 2025 at 6:06 AM, Yanina : Sziasztok) Anód press 7 nem jó transzfer U/W June 9, 2025 at 6:07 AM, Skwarek Tibor : Megyünk June 9, 2025 at 6:21 AM, 임동현 : anode press 7 Please check the L/R June 9, 2025 at 6:21 AM, Shakir (MCS) : Checking June 9, 2025 at 6:21 AM, Viczai Tamás : This message was deleted. June 9, 2025 at 6:22 AM, Shakir (MCS) : AGV02 Assigned and on the way to Press7 Thank you June 9, 2025 at 6:23 AM, Shakir (MCS) : AGV22** June 9, 2025 at 8:30 AM, Czél Tamás : Sziasztok Katódon egy AGV kisiklott a Press 1 mellett ami miatt feltorlódott minden. A probléma már el van hárítva. June 9, 2025 at 8:31 AM, Skwarek Tibor : Én úgy tudtam takarítás miatt van kinyomva June 9, 2025 at 8:34 AM, Farkas Tamàs : 7:30-kor meg lett állítva a roll raktárak takarítása miatt June 9, 2025 at 8:35 AM, 임동현 : This message was deleted. June 9, 2025 at 10:29 AM, 지찬우 : Cathode press 2 R/W near agv 21 Stop check please June 9, 2025 at 10:30 AM, Viczai Tamás : Megyünk June 9, 2025 at 10:32 AM, Farkas Tamàs : are closed for cleaning June 9, 2025 at 11:38 AM, Shakir (MCS) : @FA Please check E1SLC010_P03 there is PIO complete on time over error. Thank you! June 9, 2025 at 11:38 AM, Viczai Tamás : Itt vagyok! June 9, 2025 at 12:23 PM, Skwarek Tibor : Ca slitt 1. Unit #2 transfer height not on the same level as the plate. Can t do the transfer. We would like to ask for help. June 9, 2025 at 12:29 PM, Czél Tamás : Sziasztok Katód Press 7-re nem megy az anyag, kérlek utána néznétek? Köszönöm June 9, 2025 at 12:29 PM, Skwarek Tibor : Nézzük June 9, 2025 at 12:40 PM, Czél Tamás : Sziasztok Katód Slitt 3-on megállt a robot letolás közben. Kérlek nézzétek meg Köszönöm June 9, 2025 at 12:41 PM, Skwarek Tibor : Megyünk June 9, 2025 at 12:53 PM, Marsi Gábor : Elméletileg van anyag de nem engedi a rendszer hogy kivigye az AGV az MCS-nek kellene megnézni hogy nincsen-e lejárt anyag és a FIFO nem engedi June 9, 2025 at 12:54 PM, Czél Tamás : @Shakir (MCS) Can you check pls? June 9, 2025 at 1:01 PM, Shakir (MCS) : There is No lot available for Press7 CA. June 9, 2025 at 1:03 PM, 지찬우 : Cathode press 7 LR check please June 9, 2025 at 1:05 PM, Shakir (MCS) : LR received successfully but No search lot. Thank you June 9, 2025 at 1:08 PM, 지찬우 : There are over 100 ingredients in mes? June 9, 2025 at 1:11 PM, 지찬우 : I'm using the same materials as Unit 2, so why aren't the materials for Unit 7 coming? June 9, 2025 at 1:15 PM, Shakir (MCS) : There are 63 materials but after filtering by RTD rule, No material suitable for press CA. Thank you June 9, 2025 at 1:17 PM, Shakir (MCS) : Unit7 June 9, 2025 at 1:19 PM, Marsi Gábor : Currently, PRESS 2 is not receiving any material either. June 9, 2025 at 1:21 PM, Shakir (MCS) : No lot available Press 1, 2, 7 Unit Thank you June 9, 2025 at 1:22 PM, 지찬우 : I'll take it out manually, thank you June 9, 2025 at 1:23 PM, Sazzad Bhai SKon : There are 63 available, but RTD doesn't know their current location. Please check SCS why we're not receiving carrier id information from scs June 9, 2025 at 2:03 PM, 김건희 : Is there anyone who can check SCS June 9, 2025 at 2:04 PM, Shakir (MCS) : @Marsi Gábor could you please check June 9, 2025 at 2:12 PM, Farkas Tamàs : What should I check? June 9, 2025 at 2:14 PM, Sazzad Bhai SKon : RBC4556, 0543, 1614, 1712, 1767, 1851, 1876, 0394 are these inside the STK? June 9, 2025 at 2:15 PM, Farkas Tamàs : Ok June 9, 2025 at 2:16 PM, Sazzad Bhai SKon : And why shelf E0STKC35 (0200104) is out of service June 9, 2025 at 2:17 PM, 김주연 : Can't you check it in MCS? June 9, 2025 at 2:18 PM, Sazzad Bhai SKon : Hi pm, yes we checked from MCS also. But material information not found. These materials are not inside the warehouse. June 9, 2025 at 2:19 PM, Farkas Tamàs : we have no information about this June 9, 2025 at 2:20 PM, Simon Attila F. A. : In this position have a memo: ford press June 9, 2025 at 2:38 PM, Czél Tamás : Sziasztok Katód Slitt 1-en megállt a robot. Kérlek nézzétek meg Köszönöm June 9, 2025 at 2:42 PM, Skwarek Tibor : 12:23 kor kértünk segítséget mert nincs szintben a tálca és a transzfer, így áttolás közben elakad a reel és megáll szervo hibával. June 9, 2025 at 2:43 PM, Shakir (MCS) : @FA @Simon Attila F. A. Please check E0CNVC51_08_013 Run time error. Thank you June 9, 2025 at 2:45 PM, Skwarek Tibor : Korean technician working there. June 9, 2025 at 2:50 PM, 김주연 : @이영혁 paul 부장님, RTD에서 프레스 반송가능자재 조회하면 첫 목록에 60개 보이는데요, 모두 이미 프레스로 반송한 ROLL 들입니다. 원래 첫 필터에서 안걸러지나요? June 9, 2025 at 2:52 PM, 임동현 : anode sliter 1 Please check the L/R June 9, 2025 at 2:52 PM, Shakir (MCS) : Checking June 9, 2025 at 2:54 PM, Shakir (MCS) : LR received successfully AGV15 on the way to slitt1 Thank you June 9, 2025 at 2:59 PM, 김주연 : @JAEYOON KIM / CS RBC1447, 1846, 1825, 1795 SCS 상에 존재하는 캐리어인지 확인부탁드립니다. June 9, 2025 at 3:04 PM, 임동현 : anode sliter 1 Please check the L/R June 9, 2025 at 3:04 PM, Shakir (MCS) : Checking June 9, 2025 at 3:05 PM, 김주연 : @Baek Hojong(백호종)FA 피엠님 RBC1825 - E0STK34 0100603 위치에 있는지 확인부탁드립니다. June 9, 2025 at 3:05 PM, Shakir (MCS) : LR received successfully Job initiated and AGV01 on the way Thank you June 9, 2025 at 3:05 PM, Farkas Tamàs : RBC1851 02.06.2025 at 7:11 p.m AGV#14 took it to Press #1 from warehause 32 RBC1712 2025.05.24. 21:07 AGV #21 took it to Press #1 from warehouse 34 June 9, 2025 at 3:06 PM, Baek Hojong(백호종)FA : 네 SCS상 위치와 일치합니다 June 9, 2025 at 3:06 PM, Farkas Tamàs : none in stock June 9, 2025 at 3:07 PM, 김주연 : RBC1605 E0STKC32 0200402 RBC1846 E0STKC34 0200105 RBC1447 E0STKC34 0100402 June 9, 2025 at 3:12 PM, 김주연 : 피엠님 현재 해당 캐리어들 location이 null 값이어서 자동반송 안돠고 있습니다. @박태영 피엠님 일부 롤들 location 사라져서 자동반송 안돠고잇습니다. 수동반송명령 내려서 대응하려고 합니다. June 9, 2025 at 3:12 PM, 박태영 : 수동 반송으로 현재 위치를 만들어 주세요 June 9, 2025 at 3:29 PM, Zsmenyák György : Sziasztok segítséget kérnék anód 5-4 raktárhoz June 9, 2025 at 3:33 PM, 김주연 : @Baek Hojong(백호종)FA 피엠님 이 이상은 없네요! 그리고 일부 이미 pressed roll도 잇어서 새로 반송가능잡히는건 1447 한개일 듯 합니다 June 9, 2025 at 3:34 PM, 김주연 : @김건희 피엠님 창고 안에 반송가능 coated roll 이 부족합니다. 모두 확인해봤는데 이미 프레스 된 것들입니다 June 9, 2025 at 3:34 PM, Baek Hojong(백호종)FA : 네 확인고맙습니다 June 9, 2025 at 3:35 PM, 임동현 : anode sliter 1 Please check the L/R June 9, 2025 at 3:41 PM, 김주연 : @김 민성 피엠님 롤창고안에 RBC2920, 2707 은 RTD 상 Coating 이 마지막 공정이었던걸로 보이는데 mes와 load status 달라서 NG 발생햇던 것으로 보입니다. 실제 코팅이력있는지 확인부탁드립니다. June 9, 2025 at 3:42 PM, Shakir (MCS) : LR received successfully AGV24 on the way. Thank you June 9, 2025 at 3:43 PM, Czél Tamás : Ide azóta se érkezett segítség, a gép még mindíg áll. June 9, 2025 at 3:53 PM, JAEYOON KIM / CS : RBC1447 34 0100603 RBC1846 34 0200405 RBC1825 34 0100701 RBC1795 34 0200106 해당 4개 화물 모두 양극 34번 롤창고에 있습니다. June 9, 2025 at 3:54 PM, Sazzad Bhai SKon : @김주연 do we need to update it manually on MCS? June 9, 2025 at 3:56 PM, 김주연 : No we are making scs shelf to shelf to update the location June 9, 2025 at 4:08 PM, 김주연 : @Baek Hojong(백호종)FA 펨님 현장에서 프레스 설비 LR 새로 올리도록 요청부탁드립니다 June 9, 2025 at 4:09 PM, 김주연 : E1PRC010_P01 , E1PRC020_P01 plz make a LR again June 9, 2025 at 4:12 PM, Baek Hojong(백호종)FA : @임동현 양극 프레스 2,7호기 EQ에서 오토모드 LR 한번 눌러보시겠어요 June 9, 2025 at 4:14 PM, 임동현 : 네 알겠습니다 June 9, 2025 at 4:23 PM, 지찬우 : Cathode slitt 1 2ND transfer is stopped. Please check June 9, 2025 at 4:24 PM, 임동현 : 2,7 LR 눌렀습니다 June 9, 2025 at 4:25 PM, Skwarek Tibor : We asked for help at 12:23 because the tray and the transfer are not level, so the reel gets stuck while moving and stops with a servo error. June 9, 2025 at 4:29 PM, 지찬우 : @Baek Hojong(백호종)FA 양슬1호기 조치 가능한 인력 있을까요?? June 9, 2025 at 4:30 PM, Baek Hojong(백호종)FA : 갈께요 June 9, 2025 at 4:36 PM, 김주연 : @Sazzad Bhai SKon Plz check the LR job is created June 9, 2025 at 4:36 PM, Shakir (MCS) : Checking June 9, 2025 at 4:37 PM, Shakir (MCS) : LR received successfully but No search lot available. Thank you June 9, 2025 at 4:49 PM, 임동현 : anode press unit 7 U/W robot stopped June 9, 2025 at 4:49 PM, Yanina : Anód press 7 probléma transzfer U/W June 9, 2025 at 4:49 PM, Skwarek Tibor : Im here June 9, 2025 at 4:50 PM, Yanina : Köszönöm June 9, 2025 at 4:52 PM, Sazzad Bhai SKon : 55 data available from MES. But all of the carriers location are outside of the warehouse June 9, 2025 at 4:56 PM, 이영혁 paul : PM님 RTD에서 프래스 반송 자재를 조회 하면 MES 제공하는 뷰에서 Data를 가져와서 필터링 시작 합니다. 최초 가져오는 LOT/Carrier정보를 모두 가져와서 다음 필터에서 부터 MCS 필터를 거치고 있습니다. 말씀하신 프레스 반송된 Roll에 대해 MES에서 제공된 정보이외에 따로 필터링 되는 부분은 없습니다. June 9, 2025 at 4:56 PM, Skwarek Tibor : Szívesen. Kész June 9, 2025 at 5:36 PM, 김건희 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 양극 슬리터 비가동 11:39 부터 비가동이라고 합니다 사유는 이재기 이동 중 정지 입니다 현장 보고 사항으로는 최초 이슈 발생이후 현지 테크니션 분들이 오셨고 조치 중으로 알고 있었으나, 4시경 조치도 안 되어 있고 아무도 안 계셔서 확인 해 보니, 음극 슬리터 앞에 대기하고 있었다고 합니다 테크니션분들은 다른 대응 인력 요청했다고 하였지만, 저희 측 에서 이 톡방에 다시 대응 인력 요청을 한 이후에 백호종PM님이 오셨는데 해당 issue 에 대해 내부적으로 보고가 올라왔고, 다른 조치 사항이 있어서 오후 4시에 인원 재 배치하여 재 조치 중 일까요? 6시간 비가동은 너무 커서 확인 요청드립니다… June 9, 2025 at 5:38 PM, KIM SEYEON [김세연]_FA : 확인하고 알려드리겠습니다. June 9, 2025 at 5:41 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.09 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 9, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13+2 Overtime Overtime (2):Csanálosi Gábor, Bonnyai Ákos Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Bonnyai Ákos, Csanálosi Gábor Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 9, 2025 at 7:07 PM, Szeitz Flórián : Sziasztok! Katód press 2 re nem érkezik az anyag megnéznètek miért. Köszönöm.n June 9, 2025 at 7:08 PM, Szabadi Miki : @VK (mcs) check please, thank you. June 9, 2025 at 7:10 PM, VK (mcs) : There is no available material June 9, 2025 at 7:19 PM, waseem/ Iváncsa Fa : Does anybody know the password EOSKTA32 ? June 9, 2025 at 7:20 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please help him at E0STKA32. June 9, 2025 at 7:34 PM, Csanálosi Gábor FA : Sorted out June 9, 2025 at 7:35 PM, waseem/ Iváncsa Fa : Thank you June 9, 2025 at 7:35 PM, Yena Valerii : Hello, pls come to anode press 8 June 9, 2025 at 8:00 PM, Csanálosi Gábor FA : Sorry for late response here, solved. (Seen error in mcs, not noticed kakao) June 9, 2025 at 8:38 PM, Somoskövy Martin : Sziasztok. Cathode 2-es roll raktárnál rosszul lett bezárva az ajtó. Ránéznétek? Köszönöm. June 9, 2025 at 8:41 PM, waseem/ Iváncsa Fa : @FA technician help in anode coating June 9, 2025 at 8:41 PM, Csanálosi Gábor FA : Coming soon June 9, 2025 at 8:45 PM, 최기수(GI SU CHOI) : Done June 9, 2025 at 8:47 PM, waseem/ Iváncsa Fa : Solved thank you June 9, 2025 at 9:38 PM, Yena Valerii : same problem, fix pls June 9, 2025 at 9:38 PM, Somoskövy Martin : Anode Slitt 1 B oldali U/W-re anyagfelrakás közben megállt a robotkar. Megnéznétek? Köszönöm. June 9, 2025 at 9:41 PM, Koska Szilárd János : sziasztok gyertek légyszives anód press8 -hoz AGV kiállt hibára a leszedó robotnál June 9, 2025 at 9:42 PM, Szabadi Miki : Megyünk June 9, 2025 at 9:48 PM, 장정훈 : @FA IPS Reading Fail cathode 4 Stoker please check!! June 9, 2025 at 10:26 PM, (Unknown) left this chatroom. June 9, 2025 at 11:54 PM, Hári Zoltàn : Technikust kérnék az anód roll raktárhoz! Nem viszi be a rollt a raktárba az agv! Köszi! June 9, 2025 at 11:54 PM, Csanálosi Gábor FA : Jövünk June 9, 2025 at 11:55 PM, Hári Zoltàn : Külföldi kolégák ügyködnek vele éppen. June 10, 2025 at 12:01 AM June 10, 2025 at 12:01 AM, 최기수(GI SU CHOI) : Solved June 10, 2025 at 12:33 AM, Oleksii Krasnoshchok : Please come anode press 7 problem with Agv r/w June 10, 2025 at 3:38 AM, Kozma István : Sziasztok, gyertek légyszi Anod1 2RW. Köszi June 10, 2025 at 3:38 AM, Kiss Balázs F.A. : This message was deleted. June 10, 2025 at 3:39 AM, Atif/Ivancsa FA : Solved June 10, 2025 at 3:39 AM, Kozma István : Bocs de úgy tűnik megoldották a kollégák June 10, 2025 at 4:18 AM, Koska Szilárd János : sziasztok megtudnátok nézni anód slitteknél a konveyor szalagot mert megállt June 10, 2025 at 4:18 AM, Csanálosi Gábor FA : Nézem June 10, 2025 at 4:23 AM, Csanálosi Gábor FA : Kész June 10, 2025 at 4:24 AM, ~Lidiia~리디 ~ : @FA An error occurred at slitt 3 cathode on the conveyor with unit 1 transfer, please check this. Thank you! June 10, 2025 at 4:25 AM, Csanálosi Gábor FA : Cathode? June 10, 2025 at 4:29 AM, ~Lidiia~리디 ~ : Yes, sorry June 10, 2025 at 5:56 AM, Baek Hojong(백호종)FA : Day Shift 06.10 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 10, 2025 at 6:24 AM, 임동현 : This message was deleted. June 10, 2025 at 6:25 AM, duzzaman Md (MCS) : Theres active LR but no search lot June 10, 2025 at 6:27 AM, 임동현 : Please check the error in the anode roll warehouse #5 June 10, 2025 at 6:30 AM, Skwarek Tibor : Data off sensor error, there s a material on manual port waiting for send back or take out. June 10, 2025 at 7:42 AM, 임동현 : Cathode sliter 1 The equipment will be out of operation due to a conveyor problem. Please take action June 10, 2025 at 7:44 AM, duzzaman Md (MCS) : @FA PLEASE CHECK CNV CA 51_08_134/141 INV O1 RUN TIME ERROR June 10, 2025 at 7:51 AM, 임동현 : anode sliter 3 2nd floor conveyor problem caused tray to stop June 10, 2025 at 7:52 AM, Viczai Tamás : Nézem! June 10, 2025 at 9:12 AM, Koncz Tamás : Honywell ellenőrzést végez a CA Reel raktáraban, kb 35 perc leállást vesz igénybe, raktáranként! June 10, 2025 at 9:12 AM, Koncz Tamás : Honeywell is conducting an inspection at the CA Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 10:00 AM, 임동현 : anode sliter 5 2nd floor conveyor problem caused tray to stop June 10, 2025 at 10:05 AM, 지찬우 : Cathode slitt 1 The empty tray does not come. Please check June 10, 2025 at 10:06 AM, 지찬우 : Cathode slitt 2.3 too June 10, 2025 at 10:07 AM, Viczai Tamás : Honeywell is conducting an inspection at the CA Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 10:08 AM, duzzaman Md (MCS) : Stkc51 is OOS. Open door. Materials are coming slowly from STKC52 Should arrive soon. Increasing priorities. June 10, 2025 at 10:11 AM, Sazzad Bhai SKon : Thank you for the information. @manuafacturing, Slitter empty trays will be delayed June 10, 2025 at 10:14 AM, Koncz Tamás : Honywell ellenőrzést végez a AN Reel raktáraban, kb 35 perc leállást vesz igénybe, raktáranként! June 10, 2025 at 10:14 AM, Koncz Tamás : Honeywell is conducting an inspection at the AN Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 10:20 AM, 지찬우 : Anode slitt 5 R/W Transfer stop Check please June 10, 2025 at 10:20 AM, Viczai Tamás : Nézem. June 10, 2025 at 10:21 AM, Sazzad Bhai SKon : @지찬우 Please check this June 10, 2025 at 10:38 AM, 지찬우 : Are you taking action on the anode conveyor? June 10, 2025 at 10:39 AM, Viczai Tamás : Honeywell is conducting an inspection at the AN Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 10:49 AM, Koncz Tamás : They Finish! June 10, 2025 at 10:52 AM, 지찬우 : The conveyor is still stopped June 10, 2025 at 10:54 AM, Sazzad Bhai SKon : There are enough jobs , we'll monitor the orders June 10, 2025 at 11:07 AM, 임동현 : Cathode slitt 1 The empty tray does not come. Please check June 10, 2025 at 11:10 AM, duzzaman Md (MCS) : @FA Please check E0STKC52_B08 Track Sensor diction abnormalities June 10, 2025 at 11:10 AM, duzzaman Md (MCS) : Its coming slowly June 10, 2025 at 11:38 AM, 지찬우 : Are you still having issues with the anode reel warehouse? June 10, 2025 at 11:40 AM, duzzaman Md (MCS) : No issues but its slow. A lot of jobs been created and being executed slowly June 10, 2025 at 12:32 PM, duzzaman Md (MCS) : @FA PLEASE CHECK E0CNVA51_06_204 DATA MISSMATCH ERROR June 10, 2025 at 12:58 PM, 지찬우 : Anode slitt 2 Conveyor lift stop Check please June 10, 2025 at 1:14 PM, Zsmenyák György : Katód 4 raktárnál a leszedőnél az AGV fennakadt June 10, 2025 at 1:15 PM, 임동현 : anode press unit 8 R/W robot stopped June 10, 2025 at 1:17 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_004/005 Run time error. Thank you June 10, 2025 at 1:22 PM, duzzaman Md (MCS) : Please check E0CNVA51_6182 Servo motor Alaram occured. Thank you! June 10, 2025 at 1:36 PM, 임동현 : Cathode sliter 1 2nd floor conveyor problem caused tray to stop June 10, 2025 at 1:40 PM, 이게리 : Anode Reel Raktár státuszt tudnátok mondani? Folyamatosan lassan megy, nincs tálca, meg kell állni a termeléssel folyamatosan…. June 10, 2025 at 1:42 PM, Yanina : Anód slitt 2 probléma transzfer R/W June 10, 2025 at 1:44 PM, duzzaman Md (MCS) : Still exists. Could you check for both AN and CA CNV? Thank you June 10, 2025 at 1:46 PM, Annau András : Illetve az assembly elektróda köztes folyosón lassan már nem lehet közlekedni, annyi tálca van kiszedve a reel raktárakból. Ezzel van valami terv? @Koncz Tamás @Deepu Divan FA-Eng June 10, 2025 at 1:53 PM, Simon Attila F. A. : It happens for the third time that the AGV stops at the port of the coater machine, but at that moment the battery charge reaches a critical level, so the AGV stops at the port and goes to the charger. It can take 4-5 minutes for this to stop and the next AGV to stop. Could it be modified so that the process is not interrupted when a command is active? It was at 63% charge... June 10, 2025 at 1:59 PM, Koncz Tamás : Mi sem tudjuk hogy azokkal mi lesz, csak látjuk hogy növekszik a kupac. June 10, 2025 at 2:00 PM, Fülöp Csaba : Szia Tamás Ki teszi oda őket? June 10, 2025 at 2:00 PM, 이게리 : Lehetne valamit kezdeni vele? Mert az a rész nem FA tárolóhely, hanem a termeket illetve a selejtet tesszük oda June 10, 2025 at 2:03 PM, Koncz Tamás : Elektróda Slitt CV, liftjeinél van egy Aspirációs központ amit a Honywell takarítani szeretne, meg kell állítani a Slitt CV-t hogy be tudjanak mászi mert más megoldást nem találtunk, takarítás kb 15 percet vesz igénybe! June 10, 2025 at 2:03 PM, Koncz Tamás : Electrode Slitt CV, there is an Aspiration Center near its elevators that Honywell wants to clean, the Slitt CV has to be stopped so they can climb in because we have not found any other solution, cleaning will take about 15 minutes! June 10, 2025 at 2:04 PM, Viczai Tamás : Oké,megállítottam! June 10, 2025 at 2:09 PM, Koncz Tamás : Rákérdezek hogy mit lehet velük kezdeni! June 10, 2025 at 2:10 PM, Koncz Tamás : Agv number? June 10, 2025 at 2:15 PM, JAEYOON KIM / CS invited KANG HEEDOO[강희두]/CS. June 10, 2025 at 2:17 PM, 임동현 : anode press unit 8 R/W robot stopped June 10, 2025 at 2:17 PM, Simon Attila F. A. : Utoljára az el an agv16 volt June 10, 2025 at 2:17 PM, Viczai Tamás : Megyünk June 10, 2025 at 2:35 PM, Yanina : Anód press 2 transzfer probléma R/W June 10, 2025 at 2:42 PM, Farkas Tamàs : Kész June 10, 2025 at 3:36 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_008_011 Run time error. Thank you June 10, 2025 at 3:42 PM, Annau András : Esetleg arról van infótok, hogy a préselési folyamat után az AGV által betárolt rollok állapot az SCS-ben miért lesz NG sok esetben? Az RTD-ben minden adat stimmel. (Pl: RBA5105) Az a probléma ezzel, hogy utána a slittre már az NG státuszú rollokat nem viszi az AGV, így ezeket manuálisan kell mindig kimozgatni a raktárból, rengeteg vele a plusz munka. Csak anód oldalon az elmúlt 3 napba keletkezett 17 ilyen roll. @Koncz Tamás @Deepu Divan FA-Eng June 10, 2025 at 3:44 PM, Yanina : Anód press 7 transzfer probléma June 10, 2025 at 3:44 PM, Yanina : R/W June 10, 2025 at 3:45 PM, Deepu Divan FA-Eng : Will check it June 10, 2025 at 3:47 PM, Baek Hojong(백호종)FA : @🌌Lilla(한소라)🌠 Esetleg arról van infótok, hogy a préselési folyamat után az AGV által betárolt rollok állapot az SCS-ben miért lesz NG sok esetben? Az RTD-ben minden adat stimmel. (Pl: RBA5105) Az a probléma ezzel, hogy utána a slittre már az NG státuszú rollokat nem viszi az AGV, így ezeket manuálisan kell mindig kimozgatni a raktárból, rengeteg vele a plusz munka. Csak anód oldalon az elmúlt 3 napba keletkezett 17 ilyen roll. @Koncz Tamás @Deepu Divan FA-Eng 이거 정확하게 번역한번 해주세요 June 10, 2025 at 3:49 PM, Viczai Tamás : Megyünk June 10, 2025 at 3:50 PM, Czél Tamás : Sziasztok Katód Slitt 1-en a transfer megint nem működik, kérlek nézzétek meg. Köszönöm June 10, 2025 at 3:51 PM, Viczai Tamás : Mindjárt megyek June 10, 2025 at 4:23 PM, 지찬우 : Cathode slitt 3 Conveyor stop Check please June 10, 2025 at 4:24 PM, Viczai Tamás : Megyünk June 10, 2025 at 4:24 PM, Yanina : Anód slitt 1 AGV PROBLÉMA U/W June 10, 2025 at 4:32 PM, Viczai Tamás : Megyünk June 10, 2025 at 4:36 PM, Yanina : Anód slitt 2 probléma materiál June 10, 2025 at 5:57 PM, 이민재 : Night shift FA Schedule Date: 2025.06.10 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. Elec 최기수(Choi gisu) 3. Assy 이민재(Lee minjae) June 10, 2025 at 6:06 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 10, 2025 at 6:31 PM, Somoskövy Martin : Sziasztok. Cathode roll raktárnál a press felől lerobbant egy AGV. Megnéznétek? Köszönöm. June 10, 2025 at 6:34 PM, waseem/ Iváncsa Fa : Solved June 10, 2025 at 7:59 PM, ~Lidiia~리디 ~ : @FA There was a transfer problem on slitt Anode 3 when sending the coil, please check this. Thank you! June 10, 2025 at 8:11 PM, Szabadi Miki : Coming June 10, 2025 at 9:53 PM, Hári Zoltàn : This message was deleted. June 10, 2025 at 9:53 PM, Hári Zoltàn : Katód 1 coater elindult. Következő rolloknál bevetjük az agv-ket! Köszi! June 10, 2025 at 9:55 PM, Somoskövy Martin : Anode Slitt 1-en a reelpárból csak az egyiket vette el a robotkar. Megnéznétek? Köszönöm. June 10, 2025 at 11:44 PM, Hári Zoltàn : Katód 1 újra elindult. Reményeink szerint kb 30 perc mulva már tényleg használni fogjuk a katód 1-en az agv-ket! :) June 10, 2025 at 11:44 PM, Kiss Balázs F.A. : Okés! June 10, 2025 at 11:47 PM, Dániel Hufnágel : Köszönjük hogy szóltál (thumbsup) June 11, 2025 at 1:51 AM June 11, 2025 at 1:51 AM, ~Lidiia~리디 ~ : @Szabadi Miki @FA On slitt anode 3 there was another problem with the transfer when sending the coil, please check this. Thank you! June 11, 2025 at 1:52 AM, Szabadi Miki : Comin June 11, 2025 at 3:13 AM, Kozma István : Segítséget kérnénk anód 1 1rw AGV probléma June 11, 2025 at 3:14 AM, Szabadi Miki : Megyünk June 11, 2025 at 3:19 AM, waseem/ Iváncsa Fa : Solved June 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.11. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 11, 2025 at 6:21 AM, Hári Zoltàn : Szeretném megkérni az új külföldi FA-s munkavállalók felettesét, hogy lássa el maszkkal a dolgozókat, mert gyakran előfordul, hogy maszk nélkül jönnek be a termelési területre ami TILOS! Rutinszerűen mennek és veszik el a mi maszkunkkat a shift leader asztalról, amit mi a saját dolgozóink számára kérünk! Előre is köszönöm! June 11, 2025 at 6:26 AM, Szarka Adrián : @Szücs Géza FT-B szia ma érkezik a Ford 4 sort ellenőrizni hogy megy a termelés stb…. Mindent agv el kell használni ( Press 7-8 Slitt 4-5 ) 10:00 kor érkezik és várhatóan 13:00 kor végez. Kérlek intézkedj hogy ez a folyamat zökkenő mentes legyen. Agv ne álljon meg, üres reel talca legyen, robot ne álljon meg stb….. szólj fentebb valakinek hogy legyenek itt. Köszönöm szépen June 11, 2025 at 6:30 AM, Viktor Vadas : Sziasztok! Coatingon Anod 1 es Katod 1 fog menni, mindket sorra hasznalunk AGV-t June 11, 2025 at 6:30 AM, Böröcz Tamás : Photo June 11, 2025 at 6:34 AM, Dana Honak : 2 slitt Cathode 30 perc ninc AGV June 11, 2025 at 6:36 AM, duzzaman Md (MCS) : No materials available. Thank you June 11, 2025 at 6:46 AM, Csicskovics Balázs : Jó reggelt! Cathode press 4-7 között lehalt a 13-as AGV. Gyertek kérlek. Köszönöm June 11, 2025 at 6:56 AM, Viktoriia Hleba : 3 slitter anode u/w robot stop . Please help June 11, 2025 at 7:01 AM, Czeilinger Krisztián : Megyünk. June 11, 2025 at 7:08 AM, Rácz Dániel / FA : Kész June 11, 2025 at 8:15 AM, 오승주 : 양극 1라인 2번 리와인더 AGV 또 문제 발생하였습니다 확인 부탁드리겠습니다 June 11, 2025 at 8:15 AM, Kaniz / Ivancsa FA : Anyone please come to the cathode line 1..agv is not taking the bobing/rolar June 11, 2025 at 8:17 AM, 김지수PM(Gyuri)_FA : This message was deleted. June 11, 2025 at 8:17 AM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) 확인좀 부탁드릴게요! June 11, 2025 at 9:02 AM, Viktoriia Hleba : Press 8 anode r/w robot stop. Please check June 11, 2025 at 9:06 AM, Szarka Adrián : Anod press 8 r/w robot error June 11, 2025 at 9:07 AM, Czeilinger Krisztián : Megyek June 11, 2025 at 9:12 AM, Viktoriia Hleba : Anod slitt 2 nincs AGV June 11, 2025 at 9:14 AM, duzzaman Md (MCS) : Agv should be there soon June 11, 2025 at 9:25 AM, Szarka Adrián : Anod Press 8 uw robot meg állt June 11, 2025 at 9:25 AM, Szarka Adrián : Köszönöm June 11, 2025 at 9:31 AM, Rácz Dániel / FA : Megy June 11, 2025 at 9:43 AM, Viktoriia Hleba : Anod slitt 2 nincs AGV - 20 perc. Please check June 11, 2025 at 9:49 AM, duzzaman Md (MCS) : All good from MCS side. VC24 is assigned June 11, 2025 at 9:53 AM, Szarka Adrián : Most ? June 11, 2025 at 9:54 AM, Szarka Adrián : Újraindítottam a robotot. Így jó ? June 11, 2025 at 9:54 AM, duzzaman Md (MCS) : Vehicle departed. Should be there soon June 11, 2025 at 9:57 AM, Szarka Adrián : Köszönöm (thumbsup) June 11, 2025 at 10:03 AM, Csicskovics Balázs : Cathode press 7 megállt a robot miközben vette le a Roll-t az AGV-ről. Gyertek légyszíves Köszönöm June 11, 2025 at 10:04 AM, Rácz Dániel / FA : Jövök June 11, 2025 at 10:06 AM, Rácz Dániel / FA : Szia itt vagyok, de nem látom a hibát. June 11, 2025 at 10:07 AM, Csicskovics Balázs : Megyek June 11, 2025 at 10:17 AM, Rácz Dániel / FA : A CA Press 7 bufferről elvitte a 21-es AGV a jumbo rollt. June 11, 2025 at 10:17 AM, Deepu Divan FA-Eng : The facility is stopped due to the someone put the wrapping foil on the transfer and it got stuck inside the rack and pinion, please be careful about it. June 11, 2025 at 10:27 AM, Viktoriia Hleba : U/W probléma anode press 7 June 11, 2025 at 10:27 AM, Viktoriia Hleba : please help June 11, 2025 at 10:37 AM, Szücs Géza FT-B : Air Chuck is the problem, no have air in chuck June 11, 2025 at 10:39 AM, Szarka Adrián : Gyertek legyszives anod Press 7 June 11, 2025 at 10:39 AM, Szarka Adrián : Robottal álljatok le kerlek a gépről June 11, 2025 at 10:39 AM, Szarka Adrián : Köszönöm June 11, 2025 at 10:51 AM, Szücs Géza FT-B : kész June 11, 2025 at 11:25 AM, Csicskovics Balázs : @Rácz Dániel / FA Cathode press 7-re az AGV megint presselt anyagot hozott ki. June 11, 2025 at 11:29 AM, Nagy Dávid 4 : Anod press 8 R/W robot probléma help help köszönöm szépen June 11, 2025 at 11:29 AM, Viktoriia Hleba : Anode press 8 robot error r/w June 11, 2025 at 11:30 AM, Pálosi Róbert : Megyek June 11, 2025 at 11:30 AM, Rácz Dániel / FA : @duzzaman Md (MCS) please check this June 11, 2025 at 11:32 AM, duzzaman Md (MCS) : There no active job or LR for Cathod press 7 Last job was completed at 11.17 June 11, 2025 at 11:34 AM, Rácz Dániel / FA : to the press machine, the AGV took out the pressed material June 11, 2025 at 11:39 AM, duzzaman Md (MCS) : Yes, agv took the last carrier RBC4462 DEPOSITTED IT TO E0STKC33_P01 June 11, 2025 at 11:40 AM, 김지수PM(Gyuri)_FA : VC16 is going now to press7 P01, jut received RBC4441 from the C32 June 11, 2025 at 12:14 PM, Viktoriia Hleba : Anod slit 1 nem Jo AGV June 11, 2025 at 12:19 PM, Pálosi Róbert : Megyek June 11, 2025 at 12:25 PM, Pálosi Róbert : Majd jön a 8.agv. June 11, 2025 at 12:30 PM, Szarka Adrián : 17 számú agv mi a helyzet ? Meg állt anod Sl asztal és van rajta egy roll June 11, 2025 at 12:35 PM, Böröcz Tamás : This message was deleted. June 11, 2025 at 12:35 PM, Böröcz Tamás : Megy June 11, 2025 at 12:36 PM, Böröcz Tamás : Ja nem bocs csak útban volt egy másiknak Szóval @MCS June 11, 2025 at 12:36 PM, Szarka Adrián : Anod Slitt 1 agv segítséget szeretnék kérni. A roboton vagy egy roll de nem mozdul meg 40 perce. Köszi June 11, 2025 at 12:37 PM, Nagy Dávid 4 : Anod slitt 1 robot probléma help help köszönöm szépen June 11, 2025 at 12:38 PM, Böröcz Tamás : There is a roll on E0JGVA01_VC17 without order June 11, 2025 at 1:18 PM, Sazzad Bhai SKon : AGV 17 still have RBA5131. Please send back to roll warehouse June 11, 2025 at 1:26 PM, 김지수PM(Gyuri)_FA : Sent it back to A31! June 11, 2025 at 1:49 PM, Annau András : At 06.09 21:51, a TEST carrier ID (TEST5555) was added to the cathode 2 stocker again, who is doing this and why? Last month, we removed 70 empty bobbins from the warehouses with the same names. @KIM SEYEON [김세연]_FA @Deepu Divan FA-Eng @Koncz Tamás June 11, 2025 at 1:56 PM, Sazzad Bhai SKon : It was not created. But added to MCS bY a reconciliation by STK at 06/09 at 15:36 June 11, 2025 at 2:02 PM, 이게리 : Who putting in the empty bobbins and why? There are the data and it is happened June 11, 2025 at 2:03 PM, 이게리 : Why anybody using the bobbins for the test without any information ???? June 11, 2025 at 2:03 PM, 이게리 : We take out 2 paletts of bobbins because somebody without information putting in the bobbins … June 11, 2025 at 2:04 PM, 이게리 : @KIM SEYEON [김세연]_FA share the daily tests!!!! The whole storage is a mess, and nobody inform the production about is June 11, 2025 at 2:05 PM, 이게리 : Nobody can answer to anything just pointing to each other June 11, 2025 at 2:05 PM, KIM SEYEON [김세연]_FA : what test? now FA IS TESTING? June 11, 2025 at 2:05 PM, 김지수PM(Gyuri)_FA : Can you make sure that FA did it? June 11, 2025 at 2:06 PM, 이게리 : . There is the discription June 11, 2025 at 2:06 PM, KIM SEYEON [김세연]_FA : this is on 6.9 test bobbin. June 11, 2025 at 2:06 PM, 이게리 : If not FA testing than who putting the empty bobbins with TEST comment June 11, 2025 at 2:07 PM, 이게리 : If not FA doing it, please Check who is doing test without inform the FA and Electrode members June 11, 2025 at 2:08 PM, 이게리 : In this case this is a common problem which is reflect not only Electrode But FA also June 11, 2025 at 2:09 PM, 조혜근 : 저도 최근에 롤 창고 정리하면서 빈 보빈 10개 넘개 뺐던적이 있습니다. TEST를 하려고 빈 보빈 사용하는건 이해하지만 TEST가 끝나면 다시 빼서 원래 상태로 되돌려주세요. June 11, 2025 at 2:11 PM, 이게리 : Also We didnt get any kind of reply to this problem. LOT No missing from the Carrier Id, But the AGV is putting in the Rolls immediately in NG status , RTD is ok But LOT number missing. Please Check the communication also what is the problem. MES - RTD or SCS - MES or SCS - RTD has some problem But there is no action to solve it June 11, 2025 at 2:32 PM, KIM SEYEON [김세연]_FA : I will check and carry out test bobbin from roll storage. June 11, 2025 at 2:36 PM, Rácz Dániel / FA : RBA4304 June 11, 2025 at 3:04 PM, 연해리 : @이게리 Hello, Gely Test5555 Bobbin was created and used for our testing on March 5th. And it was left in the warehouse because we didn't clean it up. As of now, we will clean up all the test bobbins in the warehouse and be careful not to leave any behind. And if there is any problem in the future, please tell me and Deepu. June 11, 2025 at 3:09 PM, 이게리 : Thank you (thumbsup) June 11, 2025 at 3:15 PM, Nagy Dávid 4 : Anod press 8 U/W agv error help help köszönöm szépen June 11, 2025 at 3:38 PM, Viktoriia Hleba : Anod slit 1 AGV robot nem jó June 11, 2025 at 3:55 PM, Szücs Géza FT-B : Foil STK-ra valaki ránézne légyszives? June 11, 2025 at 4:00 PM, Böröcz Tamás : Slowed June 11, 2025 at 4:32 PM, Viktoriia Hleba : r/w nincs AGV 15 perc, press 7 June 11, 2025 at 4:37 PM, Csicskovics Balázs : Cathode June 11, 2025 at 4:38 PM, Czeilinger Krisztián : Nézem. June 11, 2025 at 4:41 PM, Czeilinger Krisztián : Az cathode présre a E0STKC33-ból fogja vinni ,csak az AGV nincs azonosítva az order szerint. June 11, 2025 at 4:41 PM, Czeilinger Krisztián : @Csicskovics Balázs June 11, 2025 at 4:41 PM, Csicskovics Balázs : Köszönöm June 11, 2025 at 4:43 PM, Czeilinger Krisztián : @Csicskovics Balázs nyomj egy újra kérést. June 11, 2025 at 4:43 PM, Csicskovics Balázs : Szóltam az operátornak June 11, 2025 at 5:44 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.11 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 11, 2025 at 6:04 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— June 11, 2025 at 6:24 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.11 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 11, 2025 at 6:25 PM, VK (mcs) : @FA Please check Anode roll STK A34 -P01 RBA5337 is not moving and it’s blocked other carriers way. Please store it in STK. June 11, 2025 at 6:28 PM, VK (mcs) : STK A33 * June 11, 2025 at 7:23 PM, Powder tréner : Sziasztok,Katod RTV kocsin elakadt egy raklap (Data loss error,dara mismatch error)Nézzétek rá. Köszönöm. June 11, 2025 at 7:54 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 2-3 mögött megált a conveyor June 11, 2025 at 7:54 PM, Karina Lyzanets : Gyertek légyszíves June 11, 2025 at 7:54 PM, Mr.Miti (미티) FA : Néztük June 11, 2025 at 7:58 PM, gutenkunstabelzoltan : Kesz June 11, 2025 at 8:04 PM, Powder tréner : Poron katod air showerben megállt az AGV. Nézzétek rá.Köszönöm. June 11, 2025 at 8:15 PM, Mr.Miti (미티) FA : Mennek a srácok June 11, 2025 at 8:57 PM, Atif/Ivancsa FA : Need help in anode warehouse E0SKTA34-STK homestand T-Axis RLS error June 11, 2025 at 9:04 PM, 최기수(GI SU CHOI) : Solved June 11, 2025 at 9:13 PM, Karina Lyzanets : Slitt Cathode 3 R/W transfer robot probléma June 11, 2025 at 9:13 PM, Karina Lyzanets : Köszönöm szépen June 11, 2025 at 9:24 PM, gutenkunstabelzoltan : Kesz June 11, 2025 at 9:53 PM, Vlad Danilevskyi : Hello Anode press 8 RW error. Thank you June 11, 2025 at 10:05 PM, Vörös Geri : Katód roll raktár AGV megált megnéznétek?köszi June 11, 2025 at 10:23 PM, adambenczik : Kész June 11, 2025 at 10:30 PM, Powder tréner : Helló,Poron Anód 4 soron elakadt az AGV.Nézétek rá. June 11, 2025 at 10:30 PM, Mr.Miti (미티) FA : Mennek már June 11, 2025 at 10:49 PM, cehmannzsoltcehmann : Készz June 12, 2025 at 12:45 AM June 12, 2025 at 12:45 AM, Powder tréner : Szeretnék segítséget kérni. Poron Katód airshowerben elakadt az AGV. June 12, 2025 at 12:57 AM, Karina Lyzanets : Sziasztok! A conveyor pálya Slitt Cathode 1-2 között áll meg June 12, 2025 at 12:57 AM, Karina Lyzanets : Köszönöm June 12, 2025 at 1:03 AM, gutenkunstabelzoltan : Kesz June 12, 2025 at 1:15 AM, Karina Lyzanets : Slitt Cathode 1 nincs AGV 20 perc Kérlek nézzetek meg, köszi June 12, 2025 at 1:18 AM, cehmannzsoltcehmann : @vk pls check acs ack e1slc010 June 12, 2025 at 1:19 AM, cehmannzsoltcehmann : @VK (mcs) June 12, 2025 at 1:21 AM, VK (mcs) : There is no available material June 12, 2025 at 1:23 AM, Karina Lyzanets : Thank you very much June 12, 2025 at 1:58 AM, Kurgya Attila : Sziasztok! Szeretném megkérni az illetékeseket, hogy az új külföldi FA-s kollégáknak biztosítsanak megfelelő méretű munkavédelmi cipőt. Az hogy a 45ös lábra 42es cipőt adnak és úgy hordják, mintha papucs lenne, az nagyon balesetveszélyes és már elég baleset történt az electródán, nem hiányzik emiatt mégegy bokatörés. Köszönöm June 12, 2025 at 2:03 AM, Mr.Miti (미티) FA : @noémi Legyszi fordits egyet. June 12, 2025 at 2:13 AM, Kurgya Attila : Segítséget kérek anod 1hez June 12, 2025 at 2:13 AM, Kurgya Attila : Az 1es R/W-nél megállt az AGV. June 12, 2025 at 2:16 AM, Noémi (소미) : 안녕하세요, 신입 FA 방글라데시분들께 발에 맞는 안전화를 제공해주시기를 부탁드립니다. 1분의 발 사이즈가 45인데, 42 사이즈 안전화를 받았기 때문에 슬리퍼처럼 신고 있는 것이 매우 위험합니다. 이미 전극동에서 사고가 몇번 발생했는데, 이로 인해 발목 골절 같은 또 다른 사고가 발생하지 않도록 요청 드립니다. June 12, 2025 at 2:27 AM, gutenkunstabelzoltan : Anode 2 stk ba 2 anyag all plusz az agv anyaggal a hátán de az SG számommal belepve sem tudok parancsokat adni neki uh gondolom majd valaki megoldja June 12, 2025 at 2:40 AM, Mr.Miti (미티) FA : Okes June 12, 2025 at 2:40 AM, adambenczik : Koreai csinálja June 12, 2025 at 3:55 AM, 장정훈 : I changed my destination to warehouse1 June 12, 2025 at 5:02 AM, 최기수(GI SU CHOI) : @FA I need help E0SSTKC32 June 12, 2025 at 5:04 AM, 최기수(GI SU CHOI) : This message was deleted. June 12, 2025 at 5:05 AM, 최기수(GI SU CHOI) : cathode June 12, 2025 at 5:05 AM, Mr.Miti (미티) FA : Coming June 12, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.12. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 12, 2025 at 6:40 AM, Nagy Dávid 4 : Anod slitt 1 robot probléma help help köszönöm szépen June 12, 2025 at 6:48 AM, Viktor Vadas : Sziasztok! Coatingon Anod 1, Katod 1 termel, mindket soron hasznalunk AGV-t! June 12, 2025 at 7:37 AM, Nagy Dávid 4 : Anod press 8 agv R/W error help help köszönöm szépen June 12, 2025 at 7:38 AM, Viktoriia Hleba : Anod press 8 agv R/W error June 12, 2025 at 7:50 AM, Pálosi Róbert : Kész June 12, 2025 at 7:52 AM, Viktoriia Hleba : anode slitt convejor stop June 12, 2025 at 7:53 AM, Viktoriia Hleba : please June 12, 2025 at 7:54 AM, Shakir (MCS) : @FA Please check E0CNVA51_06_012 run time over error Thank you June 12, 2025 at 8:02 AM, Pálosi Róbert : Solvwd June 12, 2025 at 8:13 AM, 오승주 : There is a problem with the 2nd R/w AGV of the 1st line of the cathode. Please check it June 12, 2025 at 8:21 AM, Pálosi Róbert : Solved June 12, 2025 at 8:58 AM, Szarka Adrián : Anod press 8 robot r/w error June 12, 2025 at 8:58 AM, Szarka Adrián : Gyertek legyszi. Köszi June 12, 2025 at 8:58 AM, Rácz Dániel / FA : Jövünk June 12, 2025 at 9:11 AM, Rácz Dániel / FA : @Szarka Adrián @Nagy Dávid 4 Anód press 8 RW -ről kézzel kellene levenni a jumbo rollt, mert az AGV nem tudja. Már kértem koreai segítséget másik csoportban ez ügyben. June 12, 2025 at 9:13 AM, Szarka Adrián : Rendben én por felé tartok. Le veszik kézzel, de szólj nekik legyszives hogy gyorsan csináljak meg mert nincs erre szabad ember most. Hogy raktárba vigyék vagy a Slitt gépre. Nagyon szépen köszönöm June 12, 2025 at 9:29 AM, 조혜근 : @FA An IPS READING FAIL error occurred in cathode roll warehouse unit 2. Please check it June 12, 2025 at 9:36 AM, Rácz Dániel / FA : Coming June 12, 2025 at 9:40 AM, Dana Honak : Cathode slitt 2 r/w robot problema . June 12, 2025 at 9:50 AM, Szarka Adrián : Anod press 7 robot r/w error June 12, 2025 at 9:50 AM, Szarka Adrián : Legyszi nézzetek meg. Köszi June 12, 2025 at 9:52 AM, Rácz Dániel / FA : Ca sliittre 2 ide tudnál jönni ? June 12, 2025 at 9:53 AM, Szarka Adrián : Megyek csak poron vagyok még. Le indulok June 12, 2025 at 9:53 AM, Rácz Dániel / FA : Az szép akkor addig megnézem az anód press 7 et June 12, 2025 at 9:54 AM, Szarka Adrián : Oksa. Köszi. June 12, 2025 at 9:54 AM, Viktoriia Hleba : 5 slitter r/w robot stop June 12, 2025 at 9:54 AM, Viktoriia Hleba : please help June 12, 2025 at 9:54 AM, Viktoriia Hleba : anode June 12, 2025 at 9:54 AM, Rácz Dániel / FA : Koreaiak megcsinálták June 12, 2025 at 10:00 AM, Szarka Adrián : Itt vagyok June 12, 2025 at 10:01 AM, Szarka Adrián : @Pálosi Róbert szólj itt kérlek ha baj van fent a poron, meg ha végeztek az ajtóval és minden működik. Köszönöm June 12, 2025 at 10:02 AM, Czeilinger Krisztián : Kész. June 12, 2025 at 10:13 AM, Rácz Dániel / FA : Kédz June 12, 2025 at 10:15 AM, Viktoriia Hleba : 5 slitt r/w robot stop June 12, 2025 at 10:15 AM, Viktoriia Hleba : anode June 12, 2025 at 10:15 AM, Pálosi Róbert : Nem lett jó az ajtó, a utilitis szól a koreaiaknak June 12, 2025 at 10:16 AM, Jozsef Foldi : An press 7 agv hiba June 12, 2025 at 10:16 AM, Jozsef Foldi : Nem találja a poziciót a leszedéshez. June 12, 2025 at 10:17 AM, Nagy Dávid 4 : anod press 8 robot r/w error help help köszönöm szépen June 12, 2025 at 10:18 AM, Czeilinger Krisztián : Megyünk. June 12, 2025 at 10:21 AM, Rácz Dániel / FA : Jövünk June 12, 2025 at 10:26 AM, Szarka Adrián : Kérlek parkolj odébb az agv el, mert a srácok be hordják addig a PORT míg nem lehet használni az agv-t. Köszönöm June 12, 2025 at 10:28 AM, Szarka Adrián : Katod Press 2 gep mögött ki állt az 1 számú agv hibára a töltő közelében. Vagy tölteni akart vagy le jönni róla. Köszönöm June 12, 2025 at 10:30 AM, Szücs Géza FT-B : @Rácz Dániel / FA beszéltem egy Synusteches Technikussal a Press AN#8 RW TR kapcsán, ő is ellenőrizte az ODSL szenzor beállításait, ő sem talált eltérést. Le tudnátok mérni, a szenzor tartó profil és TR közötti távolságot pár RW TR-en légyszives? így össze tudnánk hasonlítani a 8aséval. June 12, 2025 at 10:30 AM, Viktoriia Hleba : please check June 12, 2025 at 10:31 AM, Szücs Géza FT-B : azt mutatja, hogy valami neki útban van June 12, 2025 at 10:35 AM, Rácz Dániel / FA : Nem sokára megyünk itt vagyunk a ca press 2 mögött, agv hiba June 12, 2025 at 10:43 AM, Rácz Dániel / FA : Megy 🫡 June 12, 2025 at 10:52 AM, Viktoriia Hleba : This message was deleted. June 12, 2025 at 10:56 AM, Szarka Adrián : Katod Slitt 4 gépen rw robot error szerintem pusher gond. De azért nézzetek ra legyszives hogy nálatok van e a baj vagy nálunk köszönöm June 12, 2025 at 11:00 AM, Szarka Adrián : Robot is meg állt gyertek legyszives köszönöm June 12, 2025 at 11:04 AM, Annau András : Please check the TEST3115 Carrier ID, it also put in the warehouse in the early hours of the morning. June 12, 2025 at 11:05 AM, Szarka Adrián : Pusher be állítva már csak ti kelletek a robotot újra indítani. Köszi June 12, 2025 at 11:06 AM, 심재윤 : 음극 1라인 AGV 멈췄습니다 빠른 대응 부탁드립니다 June 12, 2025 at 11:06 AM, 심재윤 : @fa June 12, 2025 at 11:07 AM, Nauman/Ivancsa FA : AGv problem Anod June 12, 2025 at 11:07 AM, Lili : Anód 1-es soron megállt az AGV Gyors intézkedést szeretnék kérni June 12, 2025 at 11:07 AM, Nauman/Ivancsa FA : Need hurry June 12, 2025 at 11:08 AM, Szappanos Gábor : Gyertek coating anód 1re lassan meg kell állni a sorral. June 12, 2025 at 11:13 AM, Szücs Géza FT-B : @Rácz Dániel / FA ottvan June 12, 2025 at 11:13 AM, Szarka Adrián : ? Valaki ? June 12, 2025 at 11:14 AM, Szücs Géza FT-B : intézem June 12, 2025 at 11:16 AM, Czeilinger Krisztián : Megyek June 12, 2025 at 11:21 AM, Szücs Géza FT-B : kész June 12, 2025 at 11:23 AM, Nagy Dávid 4 : Anod press 7 U/W 17 számú agv keresztbe fordult és nem megy sehová help help köszönöm szépen June 12, 2025 at 11:24 AM, Czeilinger Krisztián : Megyek June 12, 2025 at 11:34 AM, Viktoriia Hleba : Please check r/w robot anode slitter 5 June 12, 2025 at 11:38 AM, 연해리 : This carrier was also used for testing in January, but it has not been cleaned up yet. However, we cannot clean up the Full Carriers. This is because the electrode materials need to be disposed of. We need the support of the electrode members through Mr. Baek for this problem. June 12, 2025 at 11:38 AM, Czeilinger Krisztián : Megyek June 12, 2025 at 11:45 AM, Czeilinger Krisztián : Kész. June 12, 2025 at 11:45 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 15p June 12, 2025 at 11:47 AM, Shakir (MCS) : AGV17 on the way June 12, 2025 at 11:53 AM, Czeilinger Krisztián : Intézkedünk June 12, 2025 at 11:55 AM, Czeilinger Krisztián : A 17 es AGV megy nemsokára és viszi a slitt 1 -re. June 12, 2025 at 11:56 AM, Czeilinger Krisztián : AGV javitás alatt. June 12, 2025 at 11:57 AM, 장영환(Younghwan Chang) : AGV 비가동 때문에 음극 1라인 코팅 잠시 정지했습니다 대응인력들 빨리 조치될 수 있도록 협조 부탁드립니다 @KIM SEYEON [김세연]_FA June 12, 2025 at 11:58 AM, Czeilinger Krisztián : Megy az AGV 17. June 12, 2025 at 11:58 AM, KIM SEYEON [김세연]_FA : @송태용(Song tae yong) 현장 확인 부탁드립니다. June 12, 2025 at 12:04 PM, KIM SEYEON [김세연]_FA : 죄송합니다. 우선 조치 완료된것으로 확인했고, 재발방지 하겠습니다. June 12, 2025 at 12:10 PM, 서지원 : 네네 agv로 인한 정지 이후 재가동 시 추가 파단 발생하여 비가동 최소 2시간 이상 추가될것같습니다.. 최대한 코터 설비는 멈추지 않도록 도움 주시면 감사하겠습니다….. June 12, 2025 at 12:12 PM, Szücs Géza FT-B : @MCS E0STKC32 P01 not working now, waiting spare part to the TR machine June 12, 2025 at 12:13 PM, Szücs Géza FT-B : please ignore the error message for now June 12, 2025 at 12:14 PM, Szarka Adrián : nincs AGV press 1 anód UW 10 perc June 12, 2025 at 12:14 PM, Szarka Adrián : Nézzetek meg legyszives June 12, 2025 at 12:17 PM, Szücs Géza FT-B : This message was deleted. June 12, 2025 at 12:19 PM, Szücs Géza FT-B : @Shakir (MCS) please check the avalaible lots for E1PRA010 P01 please June 12, 2025 at 12:26 PM, Shakir (MCS) : There is 210 materials available June 12, 2025 at 12:27 PM, Nagy Dávid 4 : nincs AGV press 1 anód UW 10 perc help help köszönöm szépen June 12, 2025 at 12:32 PM, Shakir (MCS) : Please press LR for press1 AN June 12, 2025 at 12:40 PM, Nagy Dávid 4 : @Szücs Géza FT-B tudnál jönni katod fólia raktárhoz köszönöm szépen June 12, 2025 at 12:41 PM, (Unknown) left this chatroom. June 12, 2025 at 12:53 PM, Nagy Dávid 4 : Anod press 1 mert nem jön az anyag nézzétek rá légyszíves help help help köszönöm szépen June 12, 2025 at 12:55 PM, Czeilinger Krisztián : Rendben ,nézzük. June 12, 2025 at 12:57 PM, Czeilinger Krisztián : This message was deleted. June 12, 2025 at 12:58 PM, Czeilinger Krisztián : A 24 es AGV vinni fogja az anyagot az a E0STK35-ből. June 12, 2025 at 1:04 PM, Csanálosi Gábor FA : Anod conveyor áll June 12, 2025 at 1:05 PM, Czeilinger Krisztián : Köszi. Nézzük. June 12, 2025 at 1:06 PM, Nagy Dávid 4 : Anod slitt 5 robot probléma help help köszönöm szépen June 12, 2025 at 1:10 PM, Czeilinger Krisztián : Kész June 12, 2025 at 1:10 PM, Czeilinger Krisztián : Csináljuk. June 12, 2025 at 1:57 PM, Szarka Adrián : 60 perce nincs agv anod Press 1 June 12, 2025 at 2:01 PM, Czeilinger Krisztián : Nézzük June 12, 2025 at 2:01 PM, Czeilinger Krisztián : Pillanat. June 12, 2025 at 2:02 PM, Czeilinger Krisztián : Az oldal (order) még nem látható. June 12, 2025 at 2:08 PM, Shakir (MCS) : Press LR, Last LR received at 11:07 job has been completed. Thank you June 12, 2025 at 2:11 PM, Szarka Adrián : Ez nagyon nem jó így June 12, 2025 at 2:52 PM, Szarka Adrián : @Szücs Géza FT-B koreai kollégák hiába voltak itt anod Press 8 gépnél az Rw oldalon laptoppal nem lett jó a gép. Majdnem minden roll küldésnél ki áll hibára a gép June 12, 2025 at 2:54 PM, Szücs Géza FT-B : azonnal továbbítom June 12, 2025 at 2:56 PM, Szarka Adrián : Nagyon szépen köszönöm June 12, 2025 at 3:01 PM, Pálosi Róbert : Éppen ezt tapasztalom a 25és a 7.AGV-t A CH-01 mindíg 0 értékű. June 12, 2025 at 3:02 PM, Pálosi Róbert : Most bejött a 17.-es, erre simán rátette. June 12, 2025 at 3:02 PM, Pálosi Róbert : Válogatós a kicsike! 😁 June 12, 2025 at 3:36 PM, Nagy Dávid 4 : Anod slitt 5 Conveyor probléma help help köszönöm szépen June 12, 2025 at 3:38 PM, Szarka Adrián : Lehet hogy a Slitt 2 körül állt meg June 12, 2025 at 3:38 PM, Czeilinger Krisztián : Keressük a fényképező gépet. Valakinél megtalálható? June 12, 2025 at 3:38 PM, Dana Honak : Cathode slitt 4 r/w robot problema . Convejor stop. June 12, 2025 at 3:39 PM, Csanálosi Gábor FA : Lilla+Lili kivitték a kérésemre a tintinbe June 12, 2025 at 3:47 PM, Szarka Adrián : Megint meg állt a konvejor anod oldalon June 12, 2025 at 3:47 PM, Szarka Adrián : Slitt 3 környéken June 12, 2025 at 3:49 PM, Rácz Dániel / FA : Megyek June 12, 2025 at 3:50 PM, Rácz Dániel / FA : @Czeilinger Krisztián légyszíves nézd meg én még katód convejornál vagyok June 12, 2025 at 3:52 PM, 장영환(Younghwan Chang) : 음극 롤 창고 4번 스태커에서 화물 꺼내다가 롤이 풀려서 스태커가 멈췄는데 도와주실 수 있나요? June 12, 2025 at 3:54 PM, Czeilinger Krisztián : Megyek oda June 12, 2025 at 3:54 PM, Czeilinger Krisztián : Megyek. June 12, 2025 at 3:57 PM, Rácz Dániel / FA : Megy June 12, 2025 at 4:00 PM, 장영환(Younghwan Chang) : @KIM SEYEON [김세연]_FA 지금 크레인 담당하는 업체가 어딘지 알 수 있을까요? June 12, 2025 at 4:00 PM, KIM SEYEON [김세연]_FA : 네 연락해보겠습니다 June 12, 2025 at 4:33 PM, Rácz Dániel / FA : @Fa please cehck CA #22 AGV CA roll wh 32 June 12, 2025 at 4:58 PM, Nagy Dávid 4 : Anod press 8 robot R/W error help help köszönöm szépen June 12, 2025 at 4:58 PM, Czeilinger Krisztián : Megyünk. June 12, 2025 at 5:02 PM, Rácz Dániel / FA : #7 AGV megint ODSL szenzorhibára állt mi 🥹 June 12, 2025 at 5:09 PM, Rácz Dániel / FA : 7es agvt elküldtük mert nem mér a CH-1 csak 0mm ert June 12, 2025 at 5:17 PM, Dana Honak : 4 slitt cathode 15 perc ninc AGV! June 12, 2025 at 5:17 PM, Shakir (MCS) : Checking June 12, 2025 at 5:18 PM, Czeilinger Krisztián : Nézzük. June 12, 2025 at 5:19 PM, Czeilinger Krisztián : 9-es AGV viszi. June 12, 2025 at 5:19 PM, Shakir (MCS) : RBC4619 on the way to slitt4 Thank you June 12, 2025 at 5:23 PM, Shakir (MCS) : Please check AGV June 12, 2025 at 5:24 PM, Shakir (MCS) : Now its okay June 12, 2025 at 5:26 PM, Rácz Dániel / FA : Szopved 🙏 June 12, 2025 at 5:31 PM, Czeilinger Krisztián : Slowed. June 12, 2025 at 5:51 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.12 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 12, 2025 at 6:16 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(3): Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— June 12, 2025 at 6:18 PM, Atif/Ivancsa FA : In Cathode Coating, AGV 22 has a carrying role but the delivery location of that role has not been updated or its forgot due to this from long time standing there. Help!!! June 12, 2025 at 6:20 PM, Szücs Géza FT-B : carriar ID is RBC or UNK? June 12, 2025 at 6:20 PM, Mr.Miti (미티) FA : Okay checking! June 12, 2025 at 6:27 PM, 최기수(GI SU CHOI) : carriar ID is UNK. The play back result was confirmed as RBC4624 @Mr.Miti (미티) FA @Szücs Géza FT-B June 12, 2025 at 6:28 PM, Mr.Miti (미티) FA : Thank you! June 12, 2025 at 6:40 PM, Szücs Géza FT-B : "UNK" carrier transport to WH is not allowed June 12, 2025 at 6:41 PM, Mr.Miti (미티) FA : NUgodjá meg. June 12, 2025 at 6:41 PM, Mr.Miti (미티) FA : Az az agv hipp hopp eltűnt a térképről majd vissza jött ezért lett unk June 12, 2025 at 6:42 PM, Mr.Miti (미티) FA : Aztán ott bolyongott a raktárba szegény datavesztetten 🤣 June 12, 2025 at 6:45 PM, Margaret : Hello. Come pls anode slitt 1 problems with transfer June 12, 2025 at 6:45 PM, Mr.Miti (미티) FA : Okay June 12, 2025 at 6:50 PM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8052) Run time over. June 12, 2025 at 6:58 PM, Karina Lyzanets : Hello! Most valami probléma van az Assy raktárban, és a konveyor nem működik a katódon Nézzetek meg, köszi June 12, 2025 at 7:01 PM, Margaret : The conveyor belt stopped anod June 12, 2025 at 7:01 PM, Mr.Miti (미티) FA : Kész June 12, 2025 at 7:01 PM, Mr.Miti (미티) FA : Megyek June 12, 2025 at 7:24 PM, Mr.Miti (미티) FA : Kész June 12, 2025 at 7:41 PM, Margaret : Come pls anode slitt 1 problems with transfer June 12, 2025 at 7:42 PM, Mr.Miti (미티) FA : Coming June 12, 2025 at 7:50 PM, Mr.Miti (미티) FA : @VK (mcs) Hello! Please check ca slitt 2 avaible material. Thank you? June 12, 2025 at 7:50 PM, Mr.Miti (미티) FA : ! June 12, 2025 at 7:51 PM, VK (mcs) : There is no available material. June 12, 2025 at 8:05 PM, Mr.Miti (미티) FA : Thank you! June 12, 2025 at 9:37 PM, Szeitz Flórián invited Kovács Natália. June 13, 2025 at 12:31 AM June 13, 2025 at 12:31 AM, Atif/Ivancsa FA : There is an error cathode warehouse E0STKC34, AGV motor control fault, Need help!!! Thank you June 13, 2025 at 12:33 AM, 장정훈 : @FA Anod SLITTER 5 stopper forward up time error please check!!! June 13, 2025 at 12:34 AM, Mr.Miti (미티) FA : Coming June 13, 2025 at 12:39 AM, Karina Lyzanets : Slitt Cathode 2-3 mögött megállt a conveyor Köszi June 13, 2025 at 12:40 AM, Mr.Miti (미티) FA : Érkezem pillanat June 13, 2025 at 12:49 AM, Karina Lyzanets : Ismét ez a probléma🥲🥲 June 13, 2025 at 12:50 AM, Mr.Miti (미티) FA : Csak hasonló :P látom mondjart megyek June 13, 2025 at 12:57 AM, Mr.Miti (미티) FA : Sokved June 13, 2025 at 1:53 AM, Szeitz Flórián : Anód Slitt 5 nem irha a tálca számot a PLC. légyszives nézzétek meg köszönöm June 13, 2025 at 1:53 AM, Mr.Miti (미티) FA : Nézem June 13, 2025 at 2:16 AM, Sárvári Márk : @Mr.Miti (미티) FA segítséget kérnénk Katód 1-re June 13, 2025 at 2:16 AM, Mr.Miti (미티) FA : Érkezem June 13, 2025 at 2:57 AM, Szeitz Flórián : Katód roll raktár 1 stokerben a daru kiállt hibára June 13, 2025 at 2:57 AM, adambenczik : Megyünk June 13, 2025 at 3:04 AM, adambenczik : Kész June 13, 2025 at 3:13 AM, Margaret : Come pls anode slitt 2 problems with transfer June 13, 2025 at 3:14 AM, adambenczik : Coming June 13, 2025 at 3:28 AM, adambenczik : Kész June 13, 2025 at 4:19 AM, 장정훈 : @FA Cathode AGV01 It doesn't move please check! The Acs command exists June 13, 2025 at 4:19 AM, 장정훈 : We're in a hurry to produce. Thank you! June 13, 2025 at 4:20 AM, Mr.Miti (미티) FA : Moving! June 13, 2025 at 4:23 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8052) Run time over. Thx June 13, 2025 at 4:34 AM, Mr.Miti (미티) FA : Checking June 13, 2025 at 4:39 AM, Mr.Miti (미티) FA : Solved June 13, 2025 at 6:07 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.13 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 13, 2025 at 11:14 AM, 장영환(Younghwan Chang) : 음극 롤창고 5번 크레인 멈췄는데 조치 부탁드립니다 June 13, 2025 at 11:15 AM, Baek Hojong(백호종)FA : 네 확인 June 13, 2025 at 11:17 AM, 송태용(Song tae yong) : 조치했습니다 June 13, 2025 at 11:19 AM, 장영환(Younghwan Chang) : 감사합니다 June 13, 2025 at 11:22 AM, usman/vancsa FA left this chatroom. June 13, 2025 at 12:43 PM, Irinyi László : Szervusztok! Kis segítséget szeretnék kérni az anód 2-es géphez, nem mozdul az R/W oldali daru. June 13, 2025 at 12:43 PM, Viczai Tamás : Megyek June 13, 2025 at 12:58 PM, Yanina : AGV elakadt az 1slitt anód területén June 13, 2025 at 1:28 PM, Yanina : Anód slitt probléma conveer June 13, 2025 at 1:29 PM, Skwarek Tibor : Megyünk June 13, 2025 at 2:20 PM, 장영환(Younghwan Chang) : 양극 롤창고 5번 크레인 멈췄는데 조치 부탁드립니다 June 13, 2025 at 2:25 PM, Czél Tamás : Sziasztok Anód slitt 1-nél megállt egy AGV, rajta az anyaggal. Kérlek nézzétek meg Köszönöm June 13, 2025 at 2:30 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check roll storage ca 32 June 13, 2025 at 4:56 PM, Yanina : Anód press 7 transzfer probléma June 13, 2025 at 4:56 PM, Yanina : R/W June 13, 2025 at 5:20 PM, Czél Tamás : Sziasztok Katód Slitt 4-en megállt a robot leszedés közben. Kérlek nézzétek meg Köszönöm June 13, 2025 at 5:20 PM, Viczai Tamás : Megyünk June 13, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 13, 2025 at 6:29 PM, 임동현 : Please check the error in the Cathode roll warehouse #5 June 13, 2025 at 6:32 PM, Atif/Ivancsa FA : Solved June 13, 2025 at 6:53 PM, Erik Gerzsenyi : Sziasztok Katod slitt 4-re kellene egy kis segitseg June 13, 2025 at 6:53 PM, Erik Gerzsenyi : Koszi June 13, 2025 at 6:53 PM, Oláh András : Megyünk June 13, 2025 at 7:28 PM, 임동현 : Please check the error in the Cathode roll warehouse #5 June 13, 2025 at 7:36 PM, Atif/Ivancsa FA : It shows Data_off, Sensor_on Overtime from the last 3-4 days in both anode and cathode warehouse #5 but material in and out goes well!! June 13, 2025 at 7:47 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0CNVC51_08_019 there is Data Mismatch error and it blocking materials recovery. Thank you very much! June 13, 2025 at 7:49 PM, 임동현 : Cathode sliter 2 Please check the L/R June 13, 2025 at 7:50 PM, Mohammad Amir : Good evening, There is an active LR however currently there is no material available. As soon as material will be available jobs will be created. Thank you very much! June 13, 2025 at 8:49 PM, 지찬우 : Cathode slitt4 LR check please June 13, 2025 at 8:49 PM, Mohammad Amir : Good evening, There is an active LR however currently there is no material available. As soon as material will be available jobs will be created. Thank you very much! June 13, 2025 at 9:26 PM, 임동현 : anode sliter 2 Please check the L/R June 13, 2025 at 9:26 PM, Mohammad Amir : Checking June 13, 2025 at 9:27 PM, Mohammad Amir : AGV#8 on the way. ✅ Thank you very much! June 13, 2025 at 10:09 PM, Szeitz Flórián : Sziasztok! Anód roll raktár 2es stoker . Az AGV portra lett kikérve a roll a manual helyett . Gyertek légyszives. köszönöm June 13, 2025 at 10:11 PM, Szabadi Miki : @Mohammad Amir please send back to warehouse thank you June 13, 2025 at 10:11 PM, Mohammad Amir : Sure,Checking. June 13, 2025 at 10:12 PM, Mohammad Amir : Coudk you please tell me Roll id. Thank you very much! June 13, 2025 at 10:13 PM, 임동현 : anode press 1 Please check the L/R June 13, 2025 at 10:14 PM, Szabadi Miki : RBA4211 June 13, 2025 at 10:14 PM, Mohammad Amir : LR received successfully at 21:52 ✅ Checking reason for delay. Thank you very much! June 13, 2025 at 10:16 PM, Mohammad Amir : I have sent the carrier back to warehouse ✅. AGV#20 has assigned. Thank you very much! June 13, 2025 at 10:18 PM, Mohammad Amir : Sir, You witnessed delay because of one cargo it was blocking the Roll delivery to Anode press-1. Now ,I have resolved the issue,soon Roll will arrive to Anode press-1 ✅ I am monitoring. Thank you very much! June 13, 2025 at 10:21 PM, 임동현 : anode press 2 Please check the L/R June 13, 2025 at 10:22 PM, Mohammad Amir : Sure, Checking June 13, 2025 at 10:22 PM, Mohammad Amir : Issue has been resolved ✅ AGV#1 on the way. Thank you very much! June 13, 2025 at 10:28 PM, Hári Zoltàn : Gyertek legyszi az anod 2 egyes rw-re! Koszi! June 13, 2025 at 10:29 PM, Hári Zoltàn : Coating June 13, 2025 at 10:32 PM, Oláh András : Megyünk June 13, 2025 at 10:32 PM, Atif/Ivancsa FA : No AGV gets command to pick this rolls from anode coater line 2 RW2 Need help! June 13, 2025 at 10:35 PM, 임동현 : anode press 1 Please check the L/R has not arrived yet June 13, 2025 at 10:35 PM, Mohammad Amir : Update : Now AGV#15 on the way to Anode press-2. ✅ Thank you very much! June 13, 2025 at 10:36 PM, Mohammad Amir : Sir, There was an issue that's why you witnessed delay. However I have resolved the Issue ✅ Soon AGV will be on its way to Anode press-1. I am monitoring. Thank you very much! June 13, 2025 at 10:39 PM, Mohammad Amir : Sir Update :- AGV #18 on the way to Anode Press-1 ✅. I am monitoring. Thank you very much! June 13, 2025 at 11:07 PM, Somoskövy Martin invited Szmrtyka Balázs. June 13, 2025 at 11:14 PM, 임동현 : AGV 15 stopped June 13, 2025 at 11:18 PM, Atif/Ivancsa FA : Solved June 13, 2025 at 11:30 PM, Mohammad Amir : This message was deleted. June 13, 2025 at 11:31 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKA52_C01/C02 these cranes are inactive since 22:58 , several carriers are waiting on the CNVC51 and there is a shortages of Anode Empty trays. Please make the cranes in active mode on priority. Thank you very much! June 13, 2025 at 11:32 PM, Dániel Hufnágel : Now its running June 13, 2025 at 11:32 PM, Mohammad Amir : Köszönöm szepen 🙏. June 14, 2025 at 12:01 AM June 14, 2025 at 12:01 AM, ~Lidiia~리디 ~ : @FA There are problems with the conveyor on the anode side, the trays with coils are moving slowly into the warehouse which has almost filled the entire conveyor line please check this. Thank you! June 14, 2025 at 12:01 AM, Oláh András : Comin June 14, 2025 at 12:03 AM, Mohammad Amir : Hello, You are witnessing this issue because STKA52_C01/C02 was inactive between 22:58~ 23:32. That's why there is traffic. However now everything is good ✅ and materials are going back to STKA52. Thank you very much! June 14, 2025 at 12:20 AM, 임동현 : anode sliter 2nd floor conveyor problem caused tray to stop June 14, 2025 at 12:23 AM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKA52_C02 it is again inactive. Please make it active. Thank you very much! June 14, 2025 at 12:24 AM, Mohammad Amir : Please solve the issue on priority as there is a shortages of Empty Anode trays. Thank you very much! June 14, 2025 at 12:33 AM, Atif/Ivancsa FA : This message was deleted. June 14, 2025 at 12:37 AM, 임동현 : anode sliter 1 Please check the L/R June 14, 2025 at 12:37 AM, Mohammad Amir : AGV#8 on the way ✅. Thank you very much! June 14, 2025 at 12:37 AM, 임동현 : anode sliter 2 Please check the L/R June 14, 2025 at 12:38 AM, Mohammad Amir : AGV#25 in the way ✅. Thank you very much! June 14, 2025 at 12:58 AM, 이주봉PM LEE JUBONG(FA) : @김건희 @임동현 REEL 2개 실물 중복 바코드 발견했습니다. 인계해드릴까요? EC2M081F3801L11A LTC1908 EC2M081F3801L11A LTC0463 June 14, 2025 at 12:59 AM, 이주봉PM LEE JUBONG(FA) : 양극 릴창고 M09, M10 출고 해놓았으니 취외 부탁드립니다. June 14, 2025 at 1:13 AM, 지찬우 : 알겠습니다 June 14, 2025 at 1:14 AM, 임동현 : 알겠습니다 June 14, 2025 at 1:23 AM, 임동현 : anode sliter 1 Please check the L/R June 14, 2025 at 1:24 AM, Mohammad Amir : Hello, There is an active LR however currently there is no material available. As soon as material will be available jobs will be created. Thank you very much! June 14, 2025 at 1:28 AM, 지찬우 : EC2M081F3801L11A 328M M10에 있는 릴만 6호기 세팅용이라 적혀있어서 따로 빼놨습니다 June 14, 2025 at 1:39 AM, 이주봉PM LEE JUBONG(FA) : M09 에있는건 창고에 투입 해놓을게요 June 14, 2025 at 1:45 AM, Hári Zoltàn : Technikust kernek a katod roll raktarhoz! Koszi! June 14, 2025 at 1:49 AM, Mohammad Amir : Update:- Now material is available for Slitter anode-1. So job has been created and Roll RBA0247 on the way to Anode Slitter -1 on AGV#18 ✅. I am monitoring. Thank you very much! June 14, 2025 at 1:51 AM, 지찬우 : 감사합니다! June 14, 2025 at 1:53 AM, 임동현 : Please check the error in the Cathode roll warehouse #2 #1 June 14, 2025 at 1:55 AM, Turianytsia Olesia : A szállítószalag nem mozog. Anode Slitt 2-3 June 14, 2025 at 1:58 AM, 임동현 : anode sliter 2 Please check the L/R June 14, 2025 at 1:59 AM, Mohammad Amir : Anode #24 on the way ✅. Thank you! June 14, 2025 at 2:08 AM, 임동현 : anode sliter 2 Please check the L/R June 14, 2025 at 2:09 AM, Mohammad Amir : This message was deleted. June 14, 2025 at 2:09 AM, Mohammad Amir : New LR received at 2:04. AGV #24 on the way ✅. Thank you! June 14, 2025 at 2:13 AM, Oláh András : Sajnos a raktárnak sok a feladata ezért felgyűltek a teli reel tálcák. June 14, 2025 at 2:14 AM, Oláh András : @Mohammad Amir can u modify destinations for some full trays on E0CNVA51 to E0STKA51? Thank you June 14, 2025 at 2:15 AM, Mohammad Amir : Checking June 14, 2025 at 2:33 AM, Mohammad Amir : This message was deleted. June 14, 2025 at 2:33 AM, Mohammad Amir : @Oláh András Please check LTA0449 located at E0CNVA51_06_014 there is Dest Position Loss error. Thank you very much! June 14, 2025 at 2:34 AM, Oláh András : Checking June 14, 2025 at 2:38 AM, Oláh András : Destination updated to 6055👍🏻 June 14, 2025 at 2:38 AM, Mohammad Amir : Köszönöm szepen 🙏! June 14, 2025 at 2:39 AM, 임동현 : anode sliter 1 Please check the L/R June 14, 2025 at 2:40 AM, Mohammad Amir : LR received successfully at 2:38 ✅ Roll RBA0246 on the way. I am monitoring. Thank you very much! June 14, 2025 at 2:40 AM, Mohammad Amir : Update :- AGV#18 on the way ✅. Thank you! June 14, 2025 at 2:50 AM, 임동현 : anode sliter 2 Please check the L/R June 14, 2025 at 2:51 AM, Mohammad Amir : Hello Sir, There is an active LR since 2:26 however currently there is no material available. As soon as material will be available jobs will be created. Thank you very much! June 14, 2025 at 3:00 AM, ~Lidiia~리디 ~ : @ FA @Oláh András On anode slitt 1 on u/w from side A hover the robot while installing the coil, please check it. Thank you! June 14, 2025 at 3:02 AM, Szabadi Miki : Anod slitt 1 ? It is working normal June 14, 2025 at 3:04 AM, ~Lidiia~리디 ~ : Sorry slitt 5 June 14, 2025 at 3:05 AM, ~Lidiia~리디 ~ : Please come June 14, 2025 at 3:05 AM, Szabadi Miki : Okey June 14, 2025 at 3:05 AM, ~Lidiia~리디 ~ : Thank you! June 14, 2025 at 3:05 AM, 조성준/samkoo/공정-FA : 코터 통신이 전부 끊겼습니다 June 14, 2025 at 3:05 AM, 조성준/samkoo/공정-FA : 확인바랑ㅅ June 14, 2025 at 3:05 AM, 조성준/samkoo/공정-FA : cotter communication out generation June 14, 2025 at 3:06 AM, 조성준/samkoo/공정-FA : Cotter ACS Down quick action June 14, 2025 at 3:07 AM, Oláh András : Electrode all agv stopped June 14, 2025 at 3:07 AM, Kozma István : Sziasztok agv hiba a anód 2, sos June 14, 2025 at 3:07 AM, Oláh András : Az összes megállt June 14, 2025 at 3:09 AM, Hári Zoltàn : Tudtok vele kezdeni valamit? June 14, 2025 at 3:10 AM, Szabadi Miki : Ezzel nem June 14, 2025 at 3:10 AM, Hári Zoltàn : Az nem jo hir June 14, 2025 at 3:11 AM, Szabadi Miki : Sőt elég rossz 😅 June 14, 2025 at 3:11 AM, Hári Zoltàn : Az anod 2 1 es rw-n bent all a rewinderen azt elkene onnan tuntetni mert igy manualisan se tudjuk leszedni! Gyertek legyszi azt toljuk el vagy banom is en! Koszi! June 14, 2025 at 3:13 AM, 최재균 : @FA 통신 관련 해서 AGV 조치 할수 있으신분 계신가요 ? 전극 코팅 다 멈춰야 합니다.. 메뉴얼로도 뺄수가 없습니다 June 14, 2025 at 3:17 AM, Szmrtyka Balázs : Sziasztok Katód Press #7 U/W-nél kiállt hibára az agv June 14, 2025 at 3:18 AM, Oláh András : ☝️ June 14, 2025 at 3:19 AM, Szmrtyka Balázs : Pont írni is akartam hogy életre kelt magától😂 köszi June 14, 2025 at 3:25 AM, 이주봉PM LEE JUBONG(FA) : 네 지금 현장에 있습니다. June 14, 2025 at 4:53 AM, Erik Gerzsenyi : Katod press 2-re kene egy kis segitseg June 14, 2025 at 4:53 AM, Oláh András : Megyünk June 14, 2025 at 4:53 AM, Erik Gerzsenyi : Emoticons June 14, 2025 at 4:54 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVC51_08_052/53 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! June 14, 2025 at 5:41 AM, Mr Park 박민성 invited Victor / Ivancsa FA. June 14, 2025 at 6:08 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.14 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 14, 2025 at 6:09 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(2) Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 14, 2025 at 6:51 AM, Yanina : Sziasztok) Anód slitt 2 nincs AGV 26p June 14, 2025 at 6:52 AM, duzzaman Md (MCS) : No materials available June 14, 2025 at 7:15 AM, K.Krisz Coating : An 2 2r/w nem vissza a jumbot a pufferól,kérek segitséget June 14, 2025 at 7:17 AM, Viczai Tamás : Megyünk June 14, 2025 at 7:21 AM, Yanina : Anód slitt Megálltak a készanyagos raklapok a konvejoron, kérlek, nézzétek meg June 14, 2025 at 7:24 AM, duzzaman Md (MCS) : @FA PLEASE CHECK THE P01 PORT OF EOSTKA51 CARRIER LTA0636 PHYSICALLY thank you June 14, 2025 at 8:26 AM, duzzaman Md (MCS) : @FA Pl3ase check E0STKA32_P01 AGV RETRY COUNT EXCEEDED thank you June 14, 2025 at 8:55 AM, KIM SEYEON [김세연]_FA : @Marsi Gábor @Skwarek Tibor @Viczai Tamás please check coater anode AGV 9. June 14, 2025 at 9:34 AM, Czél Tamás : Sziasztok Katód Slitt 3-on megállt a robot. Kérlek nézzétek meg Köszönöm June 14, 2025 at 9:34 AM, Viczai Tamás : Megyünk June 14, 2025 at 12:09 PM, duzzaman Md (MCS) : @FA Please check E0STK001_C01 there is MCP Safety Relay Off error. Thank you! June 14, 2025 at 2:43 PM, Oláh Rajmund : This message was deleted. June 14, 2025 at 2:43 PM, Oláh Rajmund : Gyertek légyszives cathode slitt 4 U/W egy AGV ki állt hibára June 14, 2025 at 2:44 PM, Skwarek Tibor : Megyünk June 14, 2025 at 3:00 PM, Yanina : Cathode slitt Megálltak a készanyagos tálcàk a konvejoron, kérlek, nézzétek meg June 14, 2025 at 3:02 PM, Skwarek Tibor : Kész June 14, 2025 at 3:16 PM, Czél Tamás : Sziasztok Katódon meghalt a konveyor teljesen. Kérlek nézzétek meg Köszönöm June 14, 2025 at 4:42 PM, Yanina : Cathode slitt meghalt a konveyor teljesen. Kérlek nézzétek meg June 14, 2025 at 4:44 PM, duzzaman Md (MCS) : @FA CNVC51_08_019 RUN TIME OVER ERROR CNVC51_08_020 DATA MISSMATCH ERROR PLEASE CHECK .THANK YOU June 14, 2025 at 4:46 PM, Viczai Tamás : Megyünk June 14, 2025 at 4:47 PM, Baek Hojong(백호종)FA : Done June 14, 2025 at 4:51 PM, Yanina : Minden rendben van, mozognak, de lassan. June 14, 2025 at 5:09 PM, Yanina : Anód slitt 3 nincs AGV 30p June 14, 2025 at 5:14 PM, duzzaman Md (MCS) : We are working on it June 14, 2025 at 5:20 PM, duzzaman Md (MCS) : @FA PLEASE CHECK THE CRANE OF E0STKA34 physically Its inactive. June 14, 2025 at 5:21 PM, Viczai Tamás : Megyünk June 14, 2025 at 5:23 PM, Skwarek Tibor : Done June 14, 2025 at 5:27 PM, Shakir (MCS) : Issue solved AGV15 on the way to slitt3 AN Thank you June 14, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 14, 2025 at 6:49 PM, Shakir (MCS) : This message was deleted. June 14, 2025 at 6:49 PM, Oláh András : Coming June 14, 2025 at 6:50 PM, Shakir (MCS) : @FA Please check CNVC51_08_011/12 Run time error Thank you June 14, 2025 at 7:16 PM, 지찬우 : How many materials can be sent to Anode slitt 1.2 via auto return? June 14, 2025 at 7:18 PM, 지찬우 : Check please June 14, 2025 at 7:18 PM, Shakir (MCS) : There is no lot available for slitt1 &2 Anode. June 14, 2025 at 7:21 PM, 지찬우 : There are 17 materials produced this month, but the search doesn't work? June 14, 2025 at 7:24 PM, Shakir (MCS) : There are 30 materials but after filtering by RTD rule, the data of all carrier not inside STK. Thank you June 14, 2025 at 7:26 PM, Horváth Attila : Sziasztok. Anod 2 coating 2R/W nem áll be a helyére June 14, 2025 at 7:26 PM, Shakir (MCS) : Additionally 30 data available from MES. But all of the carriers location are outside of the warehouse . June 14, 2025 at 7:28 PM, Oláh András : Ittvagyunk June 14, 2025 at 7:31 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_042 Data mismatch error. Thank you June 14, 2025 at 7:32 PM, Oláh András : Checking June 14, 2025 at 8:01 PM, Kaniz / Ivancsa FA : Their is a problem with agv in anode line 2 June 14, 2025 at 8:02 PM, Kaniz / Ivancsa FA : Please come and check June 14, 2025 at 8:03 PM, Kaniz / Ivancsa FA : Please come fast June 14, 2025 at 8:04 PM, Horváth Attila : Anod 2 AGV problem ismételten June 14, 2025 at 8:05 PM, Oláh András : Jövök már June 14, 2025 at 8:08 PM, Somoskövy Martin : Sziasztok. Cathode oldalon nagyon lassan közlekednek az üres tálcák. Ra tudnátok nézni? Köszönöm. June 14, 2025 at 8:23 PM, Shakir (MCS) : Issue has been resolved ✅ Now CNV full from CA empty trays Thank you June 14, 2025 at 8:30 PM, Horváth Attila : Anod2-re gyertek mert folyamatosan szarakodik az AGV June 14, 2025 at 8:31 PM, Szabadi Miki : Uton June 14, 2025 at 8:32 PM, Kaniz / Ivancsa FA : Same problem started again June 14, 2025 at 8:32 PM, Kaniz / Ivancsa FA : Please come to the anode line 2 June 14, 2025 at 8:33 PM, 최재균 : @FA 현장에 AGV 조치 가능하신분 계신가요? 전극 코팅 음극 2 라인 2nd R/w AGV가 멈춰 있습니다. June 14, 2025 at 8:34 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_145 there is INV-01 Run Time over error Thank you June 14, 2025 at 8:40 PM, ~Lidiia~리디 ~ : @FA There was an error on the slitt 2 cathode on the conveyor with the tray one on which there is a coil please check it now. Thank you June 14, 2025 at 9:26 PM, Dániel Hufnágel : @Shakir (MCS) Can you make order EA2P081F61774, is on VC_9! It should goes to the storage June 14, 2025 at 9:31 PM, Shakir (MCS) : Job initiated AGV09 started to move Thank you June 14, 2025 at 9:32 PM, Dániel Hufnágel : Thank you! June 14, 2025 at 9:45 PM, ~Lidiia~리디 ~ : @ FA There was an error with the tray on the slitt 3 cathode. Please check this. Thank you June 14, 2025 at 10:07 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_157 there is INV-01 Run Time over error, near Slitt3 Thank you June 14, 2025 at 10:08 PM, Dániel Hufnágel : On my way June 14, 2025 at 10:30 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_085 there is INV-01 Run Time over error, Thank you June 14, 2025 at 10:50 PM, 조성준/samkoo/공정-FA : @FA Coordinator, please call for assistance. AGV not assigned. June 14, 2025 at 10:55 PM, 조성준/samkoo/공정-FA : @FA CA 코터 지원요청 AGV 배정이 안되고 있습니다 June 14, 2025 at 10:55 PM, 조성준/samkoo/공정-FA : @FA CA Cotter request for assistance The AGV is not being deployed. June 14, 2025 at 11:10 PM, Dániel Hufnágel : @Shakir (MCS) Can you please make order for RBC0475, its on AGV17! Please send it to the storage June 14, 2025 at 11:12 PM, Dániel Hufnágel : EC1P073F62387 June 14, 2025 at 11:17 PM, Shakir (MCS) : Job initiated ✅ AGV17 started to move Thank you June 14, 2025 at 11:17 PM, Dániel Hufnágel : Thank you , June 14, 2025 at 11:56 PM, Farkas Dániel Elekt : Sziasztok Foliaraktarhoz kernenk segitseget June 14, 2025 at 11:56 PM, Szabadi Miki : Megyünk June 15, 2025 at 12:44 AM June 15, 2025 at 12:44 AM, ~Lidiia~리디 ~ : @FA On Cathode slitt 4 there is a problem with the tray conveyor out of position please check this. Thank you! June 15, 2025 at 12:45 AM, Oláh András : Comin June 15, 2025 at 1:39 AM, ~Lidiia~리디 ~ : @FA There is a conveyor problem again on Cathode slitt 4, please check this. Thank you! June 15, 2025 at 1:39 AM, 임동현 : Cathode slitt 4 conveyor not working June 15, 2025 at 1:40 AM, Oláh András : 👍🏻👍🏻 June 15, 2025 at 2:30 AM, 임동현 : Cathode slitt 4 conveyor not working June 15, 2025 at 2:30 AM, Dániel Hufnágel : On my way June 15, 2025 at 2:39 AM, Dániel Hufnágel : Done June 15, 2025 at 3:39 AM, Somoskövy Martin : Sziasztok. Cathode Press 2 R/W-ben leállt az AGV. Megnéznétek? Köszönöm. June 15, 2025 at 3:40 AM, Dániel Hufnágel : Egy pillanat és ott vagyunk June 15, 2025 at 3:54 AM, (Unknown) left this chatroom. June 15, 2025 at 4:15 AM, 임동현 : Cathode AGV 16,9 stopped June 15, 2025 at 4:15 AM, Szabadi Miki : Comin June 15, 2025 at 4:58 AM, Dániel Hufnágel : @Shakir (MCS) Check me please fast anode coater line P02 port status, why is ACS cancelled? June 15, 2025 at 5:03 AM, Dániel Hufnágel : Now AGV#20 is there June 15, 2025 at 5:03 AM, Shakir (MCS) : Yes assigned June 15, 2025 at 5:04 AM, 조성준/samkoo/공정-FA : Done! Thank you for your prompt action! June 15, 2025 at 5:05 AM, Shakir (MCS) : Job cancelled by OP action June 15, 2025 at 5:48 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.15 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 15, 2025 at 6:10 AM, Baek Hojong(백호종)FA : dayshift Schedule Date: 2025.06.15 Time: 06:00~ 18:00 1.백호종PM Baek Hojong 2.Elec 최기수(Choi gisu) 3.Assy 이민재(Lee minjae) June 15, 2025 at 8:54 AM, Bks.Gabor : Hali, Anod Press 2-re ki tudtok jönni? Nem működik a daru. Kösziiii June 15, 2025 at 8:56 AM, Skwarek Tibor : Megyünk June 15, 2025 at 1:49 PM, duzzaman Md (MCS) : @FA Please check E0STKC32_P01 IPS Sensor reading fails. Thank you June 15, 2025 at 3:42 PM, Yanina : Anód press 2 R/W transzfer probléma June 15, 2025 at 3:42 PM, Viczai Tamás : Megyünk June 15, 2025 at 3:53 PM, Czél Tamás : Sziasztok Katód Slitt 2-őnél egy szekér elvesztette a fonalat hogy hol is van. Kérlek nézzétek meg Köszönöm June 15, 2025 at 3:57 PM, Viczai Tamás : Itt vagyunk June 15, 2025 at 4:26 PM, K.Krisz Coating : An 2 lefagyott az agv June 15, 2025 at 4:26 PM, Viczai Tamás : Megyünk June 15, 2025 at 5:57 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Kiss Balázs, Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 15, 2025 at 6:01 PM, Horváth Attila : Sziasztok. Segítséget kérnénk anod2 coatingra kiállt hibára az AGV June 15, 2025 at 6:05 PM, Szabadi Miki : Megyünk June 15, 2025 at 6:13 PM, 최기수(GI SU CHOI) left this chatroom. June 15, 2025 at 6:38 PM, Jun(정우준)_SKOH FA : Night shift FA Schedule Date: 2025.06.15 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. GF 최명운(CHOI Myoungwoon) 3. GF 김정희(Kim jeong hul) June 15, 2025 at 6:43 PM, 임동현 : anode AGV 24 stopped June 15, 2025 at 6:50 PM, Yena Valerii : Hello, pls come to anode press 2 June 15, 2025 at 7:09 PM, Kozma István : Gyertek légyszi ár An2 re AGV probléma 2 rw June 15, 2025 at 7:15 PM, Kozma István : Köszönöm June 15, 2025 at 7:20 PM, Oláh András : @MCS what was the destination machine for RBC0663? There was a servo problem at E0STKC034 and the Transfer bring back the roll to storage June 15, 2025 at 7:20 PM, Mohammad Amir : Sure,checking. June 15, 2025 at 7:21 PM, Oláh András : Ty June 15, 2025 at 7:24 PM, Mohammad Amir : The destination of this Roll RBC0663 is E0STKC34_Z01. Last location of this Roll was AGV#16 and afterwards it was manually removed from it. Please confirm me the current location of this Roll. There is still a task that exists for this Roll to the STKC34. Please let me know if you need further information. Thank you very much! June 15, 2025 at 7:25 PM, Oláh András : The rolled stored back to 0200102 shelf June 15, 2025 at 7:26 PM, Oláh András : Can u modify it? June 15, 2025 at 7:26 PM, Mohammad Amir : It is E0STKC34? Thank you! June 15, 2025 at 7:26 PM, Oláh András : Yes June 15, 2025 at 7:27 PM, Oláh András : Wait we can solve it June 15, 2025 at 7:28 PM, Mohammad Amir : From MCS and RTD side location has been updated as requested ✅. Thank you very much! June 15, 2025 at 7:28 PM, Oláh András : Thank you! 🙏 June 15, 2025 at 7:29 PM, Mohammad Amir : I have cancelled the previous command and now everything is fine from MCS and RTD side. ✅ Currently Roll is available at Manual port of the STKC34 . Thank you very much! June 15, 2025 at 7:30 PM, Oláh András : Yes, thank you 🙏 June 15, 2025 at 7:31 PM, Mohammad Amir : Nagyon Szivesen. June 15, 2025 at 7:48 PM, Hári Zoltàn : Katod 1 2es rw-n agv problema! June 15, 2025 at 7:50 PM, Hári Zoltàn : Gyertek legyszi a kollega nem tudja elharitani! June 15, 2025 at 7:50 PM, Oláh András : Megyünk June 15, 2025 at 8:20 PM, Hári Zoltàn : Katod 1 1-es rwn belementem a fenyfuggonybe nem tudjuk visszanyomni! Gyertek legyszi! Koszi! June 15, 2025 at 8:22 PM, Hári Zoltàn : Sikerult! June 15, 2025 at 8:46 PM, Kaniz / Ivancsa FA : Their is a problem in cathode line 1 agv..please someone come here to solve it June 15, 2025 at 8:51 PM, Mohammad Amir : @FA @Szabadi Miki Please check E0STKA52_P01_OP01 it is OOS that's why materials recovery has stopped and there is queue of materials on CNVC51. Thank you very much! June 15, 2025 at 8:51 PM, 한동석 invited 장승환. June 15, 2025 at 8:51 PM, Oláh András : I'll check soon June 15, 2025 at 9:12 PM, Kaniz / Ivancsa FA : Their is a problem in cathode line 1 agv..please someone come here to solve it June 15, 2025 at 9:19 PM, Oláh András : @Hári Zoltàn ha tudsz gyere cathode 1 coatingrq June 15, 2025 at 9:19 PM, Oláh András : A June 15, 2025 at 9:19 PM, Oláh András : 1-es r/w nincs pozícióba és nem veszi le a transfer a tekercset June 15, 2025 at 9:20 PM, Mohammad Amir : @FA @Oláh András @Szabadi Miki Please check E0STKA52_P01_OP01 this port is OOS since 20:22. And because of this there is a huge traffic of recovery materials on CNVA51. Thank you very much! June 15, 2025 at 9:37 PM, Mohammad Amir : @FA @Oláh András @Szabadi Miki Please check this issue ,it still exists since 20:22,now CNVA51 has almost filled with recovery materials,soon CNV between Slitter -2&-3 will stop moving because of this issue. Thank you very much! June 15, 2025 at 9:37 PM, Oláh András : Assy members checking it June 15, 2025 at 9:38 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 9:38 PM, Dániel Hufnágel : Now its running June 15, 2025 at 9:38 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 9:47 PM, Hári Zoltàn : Gyertel legyszi az anod 2 1es rw-re megint belertunk a fenyfuggonybe :/ June 15, 2025 at 9:47 PM, Hári Zoltàn : Koszi June 15, 2025 at 9:53 PM, Mohammad Amir : @FA @Oláh András Please check E0CNVC51_08_013/12 there is INV-01 Run time Over error and it is blocking materials recovery. Thank you very much! June 15, 2025 at 9:54 PM, Oláh András : We will, butworking on coating transfers June 15, 2025 at 9:54 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 10:00 PM, Dániel Hufnágel : Done June 15, 2025 at 10:00 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 10:08 PM, 임동현 : Please check the error in the Cathode roll warehouse #1 June 15, 2025 at 10:09 PM, 임동현 : Cathode sliter 1.2 Please check the L/R June 15, 2025 at 10:09 PM, Mohammad Amir : Sure, checking June 15, 2025 at 10:10 PM, Mohammad Amir : Hello Sir, There is an active LR from both slitter 1&2 Cathode machines however currently there is no material available. As soon as material will be available jobs will be created. Thank you very much! June 15, 2025 at 10:12 PM, 임동현 : Cathode sliter 4 Please check the L/R June 15, 2025 at 10:13 PM, Mohammad Amir : Hello Sir, There is an active LR from both slitter 4 since 21:31 however currently there is no material available. Thank you very much! June 15, 2025 at 10:22 PM, Somoskövy Martin : Sziasztok. Anode press 8 R/W-ben megállt az AGV. Megnéznétek? Köszönöm. June 15, 2025 at 10:43 PM, Kozma István : AGV probléma Katód 1 1rw June 15, 2025 at 10:43 PM, Oláh András : @Dániel Hufnágel June 15, 2025 at 10:49 PM, Kaniz / Ivancsa FA : Agv no. 11 has some issue...please come to solve this. Thanks June 16, 2025 at 1:21 AM June 16, 2025 at 1:21 AM, Junaeed / Ivancsa FA : Agv no. 11 has some issue...please come to solve this. Thanks June 16, 2025 at 1:21 AM, Junaeed / Ivancsa FA : We need a technician June 16, 2025 at 1:22 AM, Oláh András : This message was deleted. June 16, 2025 at 1:23 AM, Oláh András : Try it if you didn't leave it us when we was there June 16, 2025 at 1:23 AM, Hári Zoltàn : Anod 2 megállt agv probléma miatt. June 16, 2025 at 1:23 AM, 한동석 : @fa 음극 2라인 2nd 리와인더 agv진입 후 멈췄습니다 현지 작업자 아무것도안하는데 조치및 교육부탁드립니다. June 16, 2025 at 1:24 AM, Hári Zoltàn : Coater June 16, 2025 at 1:24 AM, Oláh András : Jövök már June 16, 2025 at 1:32 AM, 임동현 : Cathode AGV 14 stopped June 16, 2025 at 1:48 AM, Hári Zoltàn : Katód 1 1es rw unloader megállt! Gyertek légyszi! Köszi! June 16, 2025 at 2:41 AM, ~Lidiia~리디 ~ : @FA There is a problem with AGV on anode press 8. Please check this. Thank you! June 16, 2025 at 2:42 AM, Dániel Hufnágel : Coming June 16, 2025 at 4:35 AM, Szmrtyka Balázs : Sziasztok Katód Press #1 U/W-hez kéne egy kis segítség June 16, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 16, 2025 at 8:03 AM, 최태영 : @fa E1CNVC51 INV runtime over error occurred. please check reel CV is soon blocked. June 16, 2025 at 8:10 AM, Shakir (MCS) : @FA LTC0036 at E0CNVC51_08_020 not moving since 7:36, blocking other reel. Please check Thank you June 16, 2025 at 8:10 AM, Mr.Miti (미티) FA : Technicans here, and working on it. Thank you! June 16, 2025 at 8:20 AM, adambenczik : Solved June 16, 2025 at 8:44 AM, Oleksii Krasnoshchok : Anode press 2 so long waiting Agv u/w June 16, 2025 at 8:46 AM, Shakir (MCS) : No lot available for Press2 Thank you June 16, 2025 at 8:55 AM, Shakir (MCS) : Press Next lot quantity available Press line 1,2,7 • Anode: 00 • Cathode: 05 Press line 3,4 • Anode: 48 • Cathode: 00 Thank you June 16, 2025 at 8:59 AM, Sárvári Márk : Sziasztok FA segítséget kérek a Katód 1-re, köszönöm June 16, 2025 at 9:00 AM, adambenczik : Jövök June 16, 2025 at 10:00 AM, Karina Lyzanets : Sziasztok! Gyertek az Slitt Cathode 4 re June 16, 2025 at 10:01 AM, Karina Lyzanets : Tálca nem jó pozicióban állt June 16, 2025 at 10:22 AM, Kurgya Attila : Sziasztok Gyertek légyszi katod 1hez, mert nem indul el a leszedő a 1es R/Wnél Köszi June 16, 2025 at 10:22 AM, Karina Lyzanets : Slitt Cathode 4 re gyertek légyszíves June 16, 2025 at 10:22 AM, Karina Lyzanets : Köszönöm June 16, 2025 at 10:24 AM, adambenczik : Jövünk June 16, 2025 at 10:31 AM, adambenczik : Kész June 16, 2025 at 10:39 AM, Deepu Divan FA-Eng : This message was deleted. June 16, 2025 at 10:48 AM, Karina Lyzanets : Az kátod oldalon Slitt Cathode 3-4 között megállt a conveyor June 16, 2025 at 10:49 AM, Karina Lyzanets : Köszönöm szépen June 16, 2025 at 11:08 AM, Vörös Geri : Katód slitt 3 conveyor megált.megnéznétek?köszi June 16, 2025 at 11:09 AM, cehmannzsoltcehmann : Itt vagyunk ügyködünk rajta June 16, 2025 at 11:16 AM, Kurgya Attila : Szia. Ezzel kapcsolatban lesz valami? June 16, 2025 at 11:21 AM, adambenczik : Nem tudtuk megcsinálni, vezetőség felé jelezve lett June 16, 2025 at 11:30 AM, Kovács Natália : Sziasztok Kérnék szépen segítséget a catod slitt 4, köszönöm June 16, 2025 at 11:50 AM, Shakir (MCS) : @FA Please check E0CNVA51_06_053, Run time over error Thank you June 16, 2025 at 11:50 AM, gutenkunstabelzoltan : Elvileg kesz June 16, 2025 at 11:54 AM, gutenkunstabelzoltan : I dont see it June 16, 2025 at 11:54 AM, Shakir (MCS) : Solved June 16, 2025 at 11:55 AM, Fülöp Csaba : @Koncz Tamás szia Mikor lesz megoldás erre a hibára? Jelenleg gyárt a sor és kellene az AGV-s támogatás. Köszönöm June 16, 2025 at 11:58 AM, Koncz Tamás : Szia, rákérdezek! June 16, 2025 at 12:20 PM, Fülöp Csaba : Tamás, azért lenne fontos, mert szeretnénk egy harmadik coating sort is elindítani és az csak úgy lehetséges ha mindenhol működnek az AGV-k. Köszi June 16, 2025 at 12:32 PM, Oleksii Krasnoshchok : Please come anode slitt 5 problem with r/w transfer June 16, 2025 at 12:35 PM, gutenkunstabelzoltan : Kesz June 16, 2025 at 12:41 PM, Magyar Dániel : Sziasztok! Gyertek légyszi a fólia raktárhoz kiállt hibára a gép. June 16, 2025 at 12:42 PM, Fülöp Csaba : @Kurgya Attila , kérlek ellenőrizzétek le, elvileg már működik Köszönöm June 16, 2025 at 12:55 PM, Kurgya Attila : Működik köszönöm June 16, 2025 at 2:21 PM, Nazirov Eldar : Sziasztok szeretnék kérlek segítséget nem tudjuk kérni anyagot a Katód raktáron a (E1PLC021_P02) - (E1PLC021_P01) portokra köszönöm June 16, 2025 at 2:24 PM, Shakir (MCS) : There is No material available Thank you June 16, 2025 at 3:47 PM, Szeitz Flórián : Sziasztok! Katód reel 51es raktárba kiállt a daru hibára légyszives nézétek meg. Köszönöm June 16, 2025 at 3:49 PM, Margaret : Please come anode slitt 3 problem transfer June 16, 2025 at 4:03 PM, gutenkunstabelzoltan : Kesz June 16, 2025 at 4:24 PM, Vörös Geri : Katod slitt 2 tranfer probléma megnéznétek?köszi June 16, 2025 at 4:33 PM, adambenczik : Kész June 16, 2025 at 6:04 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 FA, June 16, 2025 at 6:04 PM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 16, 2025 at 6:12 PM, Dana Honak : ! June 16, 2025 at 6:13 PM, Czeilinger Krisztián : Meg nézzük. June 16, 2025 at 6:17 PM, KIM SEYEON [김세연]_FA : @Dear electrode shift leader please contact @Szücs Géza FT-B and electrode FA technicians if you have any problems. coater Bangladeshi op moved to assembly area from now on. June 16, 2025 at 6:18 PM, Czeilinger Krisztián : Kész. June 16, 2025 at 6:27 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Takarítás Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 June 16, 2025 at 6:34 PM, Dana Honak : Nincs AGV 20 perc Anod slit 1 June 16, 2025 at 6:36 PM, 임동현 : Please check the error in the Cathode roll warehouse #1 June 16, 2025 at 6:41 PM, Czeilinger Krisztián : @VK (mcs) kérlek nézz rá Anode Slit1-re. June 16, 2025 at 6:41 PM, Czeilinger Krisztián : Az orderben nem látok egyenlőre anyag szállítást June 16, 2025 at 6:42 PM, VK (mcs) : There is no available material. June 16, 2025 at 6:45 PM, Czeilinger Krisztián : THX @VK (mcs) ;) June 16, 2025 at 6:52 PM, Anton Mashchenko : Hello, please, come to cathode slitt 4, AGV 16 position error! Thanks! June 16, 2025 at 6:53 PM, Czeilinger Krisztián : Ok. June 16, 2025 at 6:54 PM, 임동현 : anode press 1,2 Please check the L/R June 16, 2025 at 6:55 PM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 16, 2025 at 6:57 PM, VK (mcs) : There is no load request. Last one was at 6:41 AM but also there is no available material. June 16, 2025 at 7:00 PM, Czeilinger Krisztián : Kész. June 16, 2025 at 7:00 PM, 오승주 : The rewinder AGV of the coating cathode line 1 has stopped working. Please check it. June 16, 2025 at 7:05 PM, Czeilinger Krisztián : Kesz. June 16, 2025 at 9:32 PM, 오승주 : The rewinder AGV of the coating cathode line 1 has stopped working again. Please check it June 16, 2025 at 9:40 PM, 오승주 : This message was deleted. June 16, 2025 at 9:45 PM, 서지원 : 양극 코터 1라인 하루종일 비가동없이 생산 중인 설비입니다. 원활한 조립 공급을 위해 중단되지 않도록 빠른 대응 부탁드립니다 June 16, 2025 at 9:49 PM, Anton Mashchenko : Cathode press 7, AGV not coming 10 min! Help! Thanks! June 16, 2025 at 9:51 PM, Rácz Dániel / FA : @VK (mcs) please check June 16, 2025 at 9:52 PM, VK (mcs) : Rewinding or unwinding? June 16, 2025 at 9:52 PM, Rácz Dániel / FA : UW June 16, 2025 at 9:54 PM, VK (mcs) : Job assigned from STK C32. Now it's waiting for other carriers to transfer. June 16, 2025 at 9:55 PM, Rácz Dániel / FA : Thank you Sir ! 😌 June 16, 2025 at 9:55 PM, VK (mcs) : Anytime June 16, 2025 at 10:03 PM, 김지수PM(Gyuri)_FA : @VK (mcs) could you please change the carrier ID from UNK-250616012320A to RBC0722 This one is located E0STKC34 0200401 June 16, 2025 at 10:05 PM, VK (mcs) : Unfortunately I have not permission to change SCS. It's better to manually rack it out/in. Thx June 16, 2025 at 10:06 PM, 김지수PM(Gyuri)_FA : Thanks! June 16, 2025 at 11:05 PM, 임동현 : anode press unit 3 R/W robot stopped June 16, 2025 at 11:08 PM, Czeilinger Krisztián : Nemsokára érkezünk. June 16, 2025 at 11:14 PM, Czeilinger Krisztián : Solved. June 16, 2025 at 11:24 PM, 임동현 : anode AGV 24 stopped June 16, 2025 at 11:25 PM, Czeilinger Krisztián : Going June 16, 2025 at 11:28 PM, Czeilinger Krisztián : Solved. June 17, 2025 at 12:30 AM June 17, 2025 at 12:30 AM, 오승주 : The rewinder AGV of the coating cathode line 1 has stopped working again. Please check it June 17, 2025 at 12:35 AM, Rácz Dániel / FA : EL GF CA CT 01 : 1700 méter June 17, 2025 at 12:38 AM, Dana Honak : Cathode Slitt 3 nincs AGV! June 17, 2025 at 12:44 AM, Rácz Dániel / FA : @VK (mcs) pleasr cehck June 17, 2025 at 12:46 AM, VK (mcs) : No available material. June 17, 2025 at 12:46 AM, Rácz Dániel / FA : Thank you @Nagy Dávid 4 June 17, 2025 at 1:35 AM, Csicskovics Balázs : Sziasztok Cathode press 1 U/W az AVG nem találja a helyes poziciót. Gyertek légyszíves Köszönöm June 17, 2025 at 1:35 AM, Czeilinger Krisztián : Megyünk June 17, 2025 at 1:48 AM, Dana Honak : Cathode slitt 2 r/w robot problema . Convejor stop. June 17, 2025 at 1:50 AM, Czeilinger Krisztián : Készen June 17, 2025 at 1:50 AM, Czeilinger Krisztián : Megyünk June 17, 2025 at 2:29 AM, Dana Honak : Cathode Convejor stop. June 17, 2025 at 2:29 AM, Czeilinger Krisztián : Megyünk June 17, 2025 at 3:12 AM, Dana Honak : Cathode slitt 1 nem jo talca! June 17, 2025 at 3:25 AM, Csicskovics Balázs : Anod press 4 robot R/w error. Gyertek légyszíves Köszönöm June 17, 2025 at 3:36 AM, 임동현 : Cathode AGV 1 stopped June 17, 2025 at 3:36 AM, Rácz Dániel / FA : I’m here June 17, 2025 at 3:37 AM, Rácz Dániel / FA : Solved June 17, 2025 at 3:47 AM, Szappanos Gábor : Coating anód 1 nél megállt az egyik agv. Köszi June 17, 2025 at 5:22 AM, Csicskovics Balázs : Cathode Slitt 4 robot reel hiba köszönöm June 17, 2025 at 5:23 AM, Rácz Dániel / FA : Jövünk June 17, 2025 at 5:27 AM, Czeilinger Krisztián : Kész June 17, 2025 at 5:34 AM, Viktor Vadas : Sziasztok! Coating Anod 3 elott megallt az egyik AGV! Segitseget kerunk az utbaigazitashoz! Koszonom! June 17, 2025 at 5:35 AM, Czeilinger Krisztián : Oke,megyünk. June 17, 2025 at 6:04 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 7:37 AM, Atif/Ivancsa FA : Hello, In Cathode Warehouse E0STKC31 has EQ# P/O T05 Time Over Error. Need help !!! Thank you. June 17, 2025 at 7:48 AM, Shakir (MCS) : @FA Please check CA roll warehouses CA33, crane 01 “Port interface error” Thank you June 17, 2025 at 7:48 AM, gutenkunstabelzoltan : Working on it June 17, 2025 at 7:54 AM, adambenczik : Solved June 17, 2025 at 8:42 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_013/14 there is INV-01 Run time Over error. Thank you June 17, 2025 at 8:49 AM, adambenczik : Solved June 17, 2025 at 9:53 AM, Jozsef Foldi : @Deepu Divan FA-Eng why does AGV bring out the holded rolls? Do you know anything about this or can you tell your Korean supporters? June 17, 2025 at 9:56 AM, Sárvári Márk : Segítséget kérnénk az Anod raktárba, köszi.✌️ June 17, 2025 at 10:58 AM, 박정근(Park) invited 제범. June 17, 2025 at 10:58 AM, 박정근(Park) : . June 17, 2025 at 11:26 AM, cehmannzsoltcehmann : @Shakir (MCS) Pls check E1SLA030 waiting for material long time June 17, 2025 at 11:27 AM, Shakir (MCS) : Checking June 17, 2025 at 11:32 AM, Shakir (MCS) : @Fa Please check A31 STK crane is Inactive. Thank you June 17, 2025 at 11:32 AM, Shakir (MCS) : @adambenczik June 17, 2025 at 11:34 AM, adambenczik : Solved June 17, 2025 at 11:36 AM, Shakir (MCS) : Issue has been resolved. AGV24 on the way to slitt3 AN Thank you June 17, 2025 at 11:37 AM, adambenczik : Most veszi át az AGV a raktárban az anyagot June 17, 2025 at 11:38 AM, Vörös Geri : Katód slitt 2 conveyor probléma June 17, 2025 at 11:48 AM, gutenkunstabelzoltan : Kesz June 17, 2025 at 12:30 PM, Kurgya Attila : Légyszi menjetek anod 1hez mert nem mennek az AGV-k egyik R/Whez sem June 17, 2025 at 12:31 PM, Viczai Tamás : Megyünk June 17, 2025 at 12:35 PM, Karina Lyzanets : Slitt Cathode 1 nincs AGV 20 perc June 17, 2025 at 12:35 PM, Karina Lyzanets : Nézzetek légyszíves June 17, 2025 at 12:35 PM, Shakir (MCS) : Checking June 17, 2025 at 12:40 PM, Shakir (MCS) : AGV09 on the way Thank you June 17, 2025 at 12:42 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_087, Data mismatch error. Thank you June 17, 2025 at 12:45 PM, adambenczik : Checking June 17, 2025 at 12:46 PM, cehmannzsoltcehmann : Done June 17, 2025 at 2:02 PM, Magyar Dániel : Sziasztok, kiállt hibára a fólia raktár, kérlek gyertek. Köszi June 17, 2025 at 2:21 PM, gutenkunstabelzoltan : This message was deleted. June 17, 2025 at 2:26 PM, gutenkunstabelzoltan : Kesz June 17, 2025 at 3:43 PM, Margaret : a szállítószalag megállt a kettő között slitt2 -3 June 17, 2025 at 3:43 PM, Viczai Tamás : Megyünk June 17, 2025 at 3:43 PM, adambenczik : Nézzük June 17, 2025 at 3:55 PM, adambenczik : Kész June 17, 2025 at 4:13 PM, Vlad Danilevskyi : Hello. Anode slitt 5, error conveyor June 17, 2025 at 4:30 PM, Margaret : a szállítószalag megállt anod June 17, 2025 at 4:34 PM, adambenczik : Lassú a raktár egy kicsit, de minden rendben June 17, 2025 at 4:36 PM, Mr.Miti (미티) FA : Raktárral volt probléma, ezért a torlódás. June 17, 2025 at 4:36 PM, 장정훈 : @MCS Can you check 6056 on anod reel stocker SCS? Maybe it's stopped June 17, 2025 at 4:37 PM, Sazzad Bhai SKon : This message was deleted. June 17, 2025 at 4:37 PM, 장정훈 : E0STKA51 June 17, 2025 at 4:37 PM, 장정훈 : Now the slitter reel tray is stuck June 17, 2025 at 4:40 PM, Sazzad Bhai SKon : This is ccs error. MCS order is okay. E0STKA51_P03 June 17, 2025 at 4:40 PM, 장정훈 : And E0CNVA51 Conveyor, please redirect the stalled tray to E0STK52. We can't stop production! June 17, 2025 at 4:41 PM, 장정훈 : I checked the CCS and nothing seems to be wrong June 17, 2025 at 4:42 PM, Sazzad Bhai SKon : This is not bidirectional. So transferring to STK 52 is not possible unless P03 becomes in-service June 17, 2025 at 4:42 PM, 장정훈 : I'm just asking CCS to change the destination June 17, 2025 at 4:43 PM, 장정훈 : I don't have the authority! June 17, 2025 at 4:43 PM, Sazzad Bhai SKon : Ccs side is okay. SCS has problem June 17, 2025 at 4:44 PM, Sazzad Bhai SKon : SCS error** June 17, 2025 at 4:45 PM, Mr.Miti (미티) FA : Wait a moment and we'll solve it.! June 17, 2025 at 4:45 PM, Sazzad Bhai SKon : Correction; this is scs port: E0STKA51_P03 June 17, 2025 at 4:45 PM, 장정훈 : Looks like there's an LTA0877 on that port June 17, 2025 at 4:47 PM, Sazzad Bhai SKon : Great! This is in-service now June 17, 2025 at 4:48 PM, 상진 : @장정훈 상위에서 내려온 목적지와 현재 화물이 가진 목적지가 다른데 OP Panel에서 목적지 수정하셨을까요?? June 17, 2025 at 4:48 PM, Mr.Miti (미티) FA : Emoticons June 17, 2025 at 4:50 PM, 장정훈 : FA 테크니션이 목적지 변경 했습니다 June 17, 2025 at 4:51 PM, 장정훈 : 보통 CCS에서 변경 하는게 권한이 없으니 OP 패널에서 변경 한것 같습니다 June 17, 2025 at 4:51 PM, 상진 : 정상 반송 완료처리가 안될 것입니다. 차후 남아있는 잡 따로 삭제처리 하도록 하겠습니다. June 17, 2025 at 4:54 PM, 장정훈 : Mes 트레이 아이디만 정상적으로 맵핑 확인 되면 크게 문제 없을거 같습니다 감사합니다! June 17, 2025 at 5:40 PM, Powder tréner : Sziasztok,poron katod raktáron megálltak a AGV k. June 17, 2025 at 5:42 PM, 류종석(RyuJongSeok) : This message was deleted. June 17, 2025 at 5:43 PM, 류종석(RyuJongSeok) : This message was deleted. June 17, 2025 at 5:43 PM, 류종석(RyuJongSeok) : Coating Cathode 1 2nd Rewinder Issues, Needs Help June 17, 2025 at 5:44 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please let FA technicians check the issue June 17, 2025 at 5:52 PM, Szücs Géza FT-B : no problem June 17, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.17 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(1): Szabadi Miklós Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(5): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (2): Csanálosi Gábor, Takács Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 17, 2025 at 6:14 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B coating Cathode 1 line 2nd RW CP has a problem. June 17, 2025 at 6:14 PM, KIM SEYEON [김세연]_FA : please change it into new one. June 17, 2025 at 6:15 PM, KIM SEYEON [김세연]_FA : please call me when Noemi arrived. June 17, 2025 at 6:18 PM, Nagy Dávid 4 : Anod slit 2 nincs tarca help help köszönöm szépen June 17, 2025 at 6:19 PM, Szarka Adrián : Sziasztok Anod Sl asztalnál a 8 számú agv megállt error hiba gyertek legyszi June 17, 2025 at 6:20 PM, Rácz Dániel / FA : @mcs please check June 17, 2025 at 6:22 PM, VK (mcs) : Please explain it in English. Thx June 17, 2025 at 6:30 PM, Nagy Dávid 4 : Conveyor Empty trays don't come on the field June 17, 2025 at 6:31 PM, VK (mcs) : Anode STK is busy right now. June 17, 2025 at 6:38 PM, Rácz Dániel / FA : Thank you Sir 😉 June 17, 2025 at 6:46 PM, Viktoriia Hleba : Sziasztok 1 st/rw nem jó robot. Kérem, nézze meg! June 17, 2025 at 6:49 PM, Czeilinger Krisztián : Megyünk. June 17, 2025 at 6:50 PM, Böröcz Tamás : Modul/formaiton? June 17, 2025 at 6:51 PM, Böröcz Tamás : Or electrode? June 17, 2025 at 6:51 PM, Böröcz Tamás : Coating/press/slitt? June 17, 2025 at 6:52 PM, Böröcz Tamás : 1es sor? Vagy első RW June 17, 2025 at 6:52 PM, Böröcz Tamás : Kicsit több infó kellene June 17, 2025 at 6:55 PM, Böröcz Tamás : Nem megyünk amúgy addig sehová June 17, 2025 at 6:58 PM, Viktoriia Hleba : 5 slitter anode June 17, 2025 at 6:59 PM, Czeilinger Krisztián : Megyünk. June 17, 2025 at 6:59 PM, Böröcz Tamás : Thanks June 17, 2025 at 7:17 PM, Anton Mashchenko : Hello, cathode press 4, AGV not coming 15 min! Help! Thanks! June 17, 2025 at 7:18 PM, VK (mcs) : There is no available material June 17, 2025 at 7:19 PM, Czeilinger Krisztián : @VK (mcs) please check. June 17, 2025 at 7:22 PM, Böröcz Tamás : El kéne pakolni az út mellől hogy el férjen az AGV June 17, 2025 at 7:22 PM, Rácz Dániel / FA : Megyünk June 17, 2025 at 7:22 PM, Varga Tamás Powder : This message was deleted. June 17, 2025 at 7:22 PM, Böröcz Tamás : @manufacturing June 17, 2025 at 7:22 PM, Rácz Dániel / FA : @mcs June 17, 2025 at 7:23 PM, Böröcz Tamás : Nem lesz jumbo June 17, 2025 at 7:23 PM, VK (mcs) : This message was deleted. June 17, 2025 at 7:24 PM, Böröcz Tamás : CA press2 June 17, 2025 at 8:39 PM, Nagy Dávid 4 : Anod press 8-as gépnél 7 számú agv kiált hibára help help köszönöm szépen June 17, 2025 at 8:47 PM, Czeilinger Krisztián : Kesz June 17, 2025 at 8:55 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 코터양극 1호기 CP교체하는것 현장서 완료 예정시간 서지원피엠님과 이야기해주시겠어요? 저희 이재기 전원이 살아야 코터 터렛이 돈다고 합니다. June 17, 2025 at 9:09 PM, Dana Honak : Cathode slitt 4 u/w robot problema ! June 17, 2025 at 9:10 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please be hurried to operate CA coater line no.1 June 17, 2025 at 9:14 PM, Csicskovics Balázs : !!!!!!!! June 17, 2025 at 9:18 PM, Czeilinger Krisztián : Megyek. June 17, 2025 at 9:29 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 코터 양극1호기 CP교체는 22시정도에 완료될것 같습니다. 지연되어 죄송합니다. June 17, 2025 at 9:42 PM, 서지원 : 네 현장에서 대기중입니다. 리와인더 터렛불가로 인한 파단 발생하여 파단 조치 후 이재기 CP교체후에도 현장에서 이재기 전원 잘 들어오는지 점검 부탁드립니다. June 17, 2025 at 9:53 PM, Böröcz Tamás : @Viktor Vadas T-6p June 17, 2025 at 10:02 PM, 조혜근 : @FA The UW side No. 16 AGV of the cathode slitter unit 4 is stopped. Please check it June 17, 2025 at 10:03 PM, Anton Mashchenko : Come to cathode press 2, AGV 1 position error! Help! Thanks! June 17, 2025 at 10:05 PM, 방혁 PM(Bang.Hyuk) FA : @서지원 피엠님 MC교체 작업 곧 완료 될 예정입니다 June 17, 2025 at 10:06 PM, JAEYOON KIM / CS : 교체 작업 완료 되었습니다. 설비 확인 부탁드립니다. June 17, 2025 at 10:06 PM, 조혜근 : I've solved it June 17, 2025 at 11:14 PM, Anton Mashchenko : Cathode press 7, AGV not coming 15 min! Help! June 17, 2025 at 11:15 PM, Csanálosi Gábor FA : C51 conv elakadás @Czeilinger Krisztián June 17, 2025 at 11:15 PM, Szabadi Miki : @VK (mcs) please check this , thank you! June 17, 2025 at 11:16 PM, Szabadi Miki : Megyünk June 17, 2025 at 11:16 PM, VK (mcs) : There is no available material June 17, 2025 at 11:16 PM, Czeilinger Krisztián : Meg nézzük. June 17, 2025 at 11:17 PM, Dana Honak : Cathode slitt 4 r/w robot problema . Convejor stop. June 17, 2025 at 11:17 PM, 배병민 (Bae Byoungmin) : @FA Technician @Szücs Géza FT-B Please Check June 17, 2025 at 11:18 PM, Csanálosi Gábor FA : @배병민 (Bae Byoungmin) June 17, 2025 at 11:19 PM, 배병민 (Bae Byoungmin) : Yes, I understand. Thanks for the info. June 17, 2025 at 11:21 PM, Csanálosi Gábor FA : Sometimes hard to follow the kakao reply feed lines indeed June 17, 2025 at 11:21 PM, 배병민 (Bae Byoungmin) : (씨익) June 17, 2025 at 11:22 PM, Szücs Géza FT-B : and im on powder @배병민 (Bae Byoungmin) 🫡😉 June 17, 2025 at 11:22 PM, Czeilinger Krisztián : Kész. June 17, 2025 at 11:23 PM, Csanálosi Gábor FA : I know a good anonym drog ambulance number if you need June 17, 2025 at 11:24 PM, 서지원 : @방혁 PM(Bang.Hyuk) FA @KIM SEYEON [김세연]_FA 양극 코터 1라인 리와인더 터렛 정상 작동 확인했습니다. AGV 사용도 가능한건가요?? June 17, 2025 at 11:24 PM, 방혁 PM(Bang.Hyuk) FA : 네 맞습니다 June 17, 2025 at 11:24 PM, Szücs Géza FT-B : yes, we need test June 17, 2025 at 11:27 PM, Nauman/Ivancsa FA : This message was deleted. June 17, 2025 at 11:28 PM, Szücs Géza FT-B : wrong group chat June 17, 2025 at 11:28 PM, 방혁 PM(Bang.Hyuk) FA : @FA Please check AGV 1,9 Roll storage area June 17, 2025 at 11:29 PM, Nauman/Ivancsa FA : Sorry June 17, 2025 at 11:29 PM, Szücs Géza FT-B : NP June 17, 2025 at 11:30 PM, Szücs Géza FT-B : @Szabadi Miki @Czeilinger Krisztián @Pálosi Róbert légyszi ennek nézzetek utána June 17, 2025 at 11:30 PM, Czeilinger Krisztián : Rendben van. June 17, 2025 at 11:33 PM, Czeilinger Krisztián : Solved. June 17, 2025 at 11:34 PM, 방혁 PM(Bang.Hyuk) FA : 코터 양극 1호기 명령 생성 및 구동 확인중입니다. 모니터링 진행하겠습니다 June 17, 2025 at 11:36 PM, Csanálosi Gábor FA : @Czeilinger Krisztián 4-es slittnél elakadás a conveyoron June 17, 2025 at 11:38 PM, Czeilinger Krisztián : Rendben, nemsokára érkezünk. June 17, 2025 at 11:42 PM, 방혁 PM(Bang.Hyuk) FA : 코터 1호기 RW정상 반송 확인했습니다. 5회정도 더 확인하고 운영 인력 배치시켜 관리하겠습니다. June 17, 2025 at 11:44 PM, Czeilinger Krisztián : Kész. June 17, 2025 at 11:45 PM, Csanálosi Gábor FA : Még nem az igazi June 17, 2025 at 11:45 PM, 서지원 : 네 알겠습니다! June 17, 2025 at 11:46 PM, Czeilinger Krisztián : Megyünk vissza. June 17, 2025 at 11:47 PM, 김건희 : Anode press2 U/W there is no material, please check it thank you June 17, 2025 at 11:48 PM, VK (mcs) : AGV 24 is on the way June 17, 2025 at 11:51 PM, Csicskovics Balázs : Cathode press 2 U/W there is no material, please check it thank you! June 17, 2025 at 11:52 PM, 방혁 PM(Bang.Hyuk) FA : It's just arrived June 17, 2025 at 11:54 PM, VK (mcs) : There is no available material June 17, 2025 at 11:55 PM, 배병민 (Bae Byoungmin) : @VK (mcs) please share available lot June 17, 2025 at 11:56 PM, Csicskovics Balázs : Thank you! June 18, 2025 at 12:01 AM June 18, 2025 at 12:01 AM, VK (mcs) : Next LOT available Electrode Slitter 1/2/4/5 Anode:04 Cathode:00 Slitter 3 Anode: 74 Cathode: 0 /////////////////////////////// Press 1/2/7/8 Anode:00 Cathode:01 Press 3/4 Anode:14 Cathode:00 June 18, 2025 at 1:08 AM, Nagy Dávid 4 : Anod press 1 25 perce nem hozza az anyagot az agv help help köszönöm szépen June 18, 2025 at 1:09 AM, Rácz Dániel / FA : @VK (mcs) please chekc June 18, 2025 at 1:10 AM, VK (mcs) : No available material June 18, 2025 at 1:20 AM, Rácz Dániel / FA : Shank You Sir ! June 18, 2025 at 2:34 AM, Viktoriia Hleba : 3 slitter anode convejor stop. Please check June 18, 2025 at 2:34 AM, Viktoriia Hleba : 3-4 slitter anode June 18, 2025 at 2:36 AM, Czeilinger Krisztián : Pillanat és megyünk. June 18, 2025 at 2:42 AM, Czeilinger Krisztián : Kést June 18, 2025 at 2:42 AM, Czeilinger Krisztián : Kész June 18, 2025 at 3:04 AM, Szücs Géza FT-B : @VK (mcs) can you check please, who create this order? MNL20250617203204UNK-250617135908A June 18, 2025 at 3:08 AM, Dana Honak : This message was deleted. June 18, 2025 at 3:11 AM, VK (mcs) : Can you tell me when was it? June 18, 2025 at 3:15 AM, Szücs Géza FT-B : this is in the order number MNL - manual 2025 06 17 20 : 32 June 18, 2025 at 3:21 AM, Rácz Dániel / FA : @fa Oos June 18, 2025 at 3:31 AM, VK (mcs) : Carrier UNK-250617135908A Transferred from STKA33 to port 1 User ID: mcsop! PC IP: 10.97.47.38 June 18, 2025 at 3:32 AM, VK (mcs) : It's interesting who's using MCS id? June 18, 2025 at 3:39 AM, Szücs Géza FT-B : I dont know. and why create this..... this order creating AGVs late....on both area June 18, 2025 at 3:41 AM, Szücs Géza FT-B : the order have wrong destination June 18, 2025 at 3:41 AM, VK (mcs) : Exactly, a manual Job created to auto-port !! June 18, 2025 at 3:46 AM, Viktoriia Hleba : 5 slitter anode nincs tálca June 18, 2025 at 3:49 AM, Rácz Dániel / FA : Itt vagyunk, adat hiba van. Kis türelem! June 18, 2025 at 3:57 AM, Rácz Dániel / FA : Solved, lassan mennek a tárcák ! 🤗 June 18, 2025 at 5:03 AM, Szarka Adrián : Anod konvejor meg állt gyertek legyszives köszönöm June 18, 2025 at 5:03 AM, Viktoriia Hleba : 3-4 slitter anode June 18, 2025 at 5:03 AM, Szabadi Miki : Megyünk June 18, 2025 at 5:30 AM, Nagy Dávid 4 : Anod slit 2-3 nincs tálca help help köszönöm szépen June 18, 2025 at 5:31 AM, Czeilinger Krisztián : Az Anode 52-es raktárban hiba volt,lassan érkeznek a tálcák. June 18, 2025 at 5:32 AM, Nauman/Ivancsa FA : This message was deleted. June 18, 2025 at 5:36 AM, Anton Mashchenko invited Aloshyn Yevhen. June 18, 2025 at 6:20 AM, Mohammad Amir : Good morning everyone, Next LOT available Electrode Slitter 1/2/4/5 Anode:03 Cathode:01 Slitter 3 Anode: 68 Cathode: 0 /////////////////////////////// Press 1/2/7/8 Anode:00 Cathode:05 Press 3/4 Anode:14 Cathode:00 Thank you very much! June 18, 2025 at 6:22 AM, Mohammad Amir : @FA @Farkas Tamàs Please check E0STKA52_C01/C02 these cranes are inactive since 5:56, several carriers are waiting on the CNV to be recovered. Please make the cranes in active mode on priority. Thank you very much! June 18, 2025 at 6:24 AM, Farkas Tamàs : Ok June 18, 2025 at 6:31 AM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.18 Time: 06:00~ 18:00 1. 백호종PM Baek Hojong 2. Assy 이민재(Lee minjae) June 18, 2025 at 6:44 AM, Czél Tamás : Sziasztok Katód Press 7-re 42 perce nem érkezett anyag. Kérlek nézzétek meg hogy mi a baj. Köszönöm June 18, 2025 at 6:45 AM, Mohammad Amir : Checking. June 18, 2025 at 6:46 AM, Mohammad Amir : This message was deleted. June 18, 2025 at 6:47 AM, Mohammad Amir : Good morning, Please press LR. Thank you very much! June 18, 2025 at 6:49 AM, Czél Tamás : I pressed again June 18, 2025 at 6:51 AM, Simon Attila F. A. : @Mohammad Amir I tried too much login to MCS with wrong password, this locked now for me. Please help to my password recovery. June 18, 2025 at 6:51 AM, Mohammad Amir : Unfortunately we did not receive it. Please try again. Thank you! June 18, 2025 at 6:52 AM, Mohammad Amir : Sure, please tell me the id. Thank you! June 18, 2025 at 6:52 AM, Simon Attila F. A. : SGCA494 June 18, 2025 at 6:54 AM, Czél Tamás : Are you kidding me? June 18, 2025 at 6:54 AM, Mohammad Amir : Issue has been resolved ✅. You can now login with the same password. Thank you very much! June 18, 2025 at 6:54 AM, Czél Tamás : Anyway, cathode press 2 the same situation June 18, 2025 at 6:55 AM, Mohammad Amir : For your kind information:- The last load request (LR) we received was yesterday (17th June) at 22:03. Afterwards we didn't receive any LR. Thank you very much! June 18, 2025 at 6:56 AM, Mohammad Amir : Checking. June 18, 2025 at 6:56 AM, Simon Attila F. A. : Working! Thank you for help! June 18, 2025 at 6:56 AM, Mohammad Amir : Nagyon Szivesen! Feel free to contact me again if you face any further issues. June 18, 2025 at 6:58 AM, Simon Attila F. A. : Ok, thank so much! June 18, 2025 at 6:58 AM, Mohammad Amir : Unfortunately same situation exists for E1PRC020_P01(UW) , Last LR received at 17th June at 23:05. Afterwards there is no LR. Thank you very much! June 18, 2025 at 7:01 AM, Mohammad Amir : For your information:- Currently we have 2 Rolls available which is good for Cathode Press 2&7. So,if need these Rolls , please press LR these Rolls will come. Thank you very much! June 18, 2025 at 7:07 AM, Faisal / Ivancsa FA invited Soumik/Ivancsa FA. June 18, 2025 at 8:00 AM, Mohammad Amir : Good morning everyone, Next LOT available Electrode Slitter 1/2/4/5 Anode:01 Cathode:00 Slitter 3 Anode: 67 Cathode: 0 /////////////////////////////// Press 1/2/7/8 Anode:01 Cathode:01 Press 3/4 Anode:14 Cathode:00 Thank you very much! June 18, 2025 at 9:26 AM, Mohammad Amir : @FA @Simon Attila F. A. Please check E0CNVC51_08_071 there is tray wrong position error and it is blocking materials recovery. Thank you very much! June 18, 2025 at 9:28 AM, Viczai Tamás : A Korean works there. June 18, 2025 at 9:28 AM, Mohammad Amir : Thank you very much for the update. June 18, 2025 at 9:46 AM, Mohammad Amir : Dear @All, Next LOT available Electrode Slitter 1/2/4/5 :- Anode:02 Cathode:00 Slitter 3:- Anode: 67 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:01 Press 3/4:- Anode:14 Cathode:00 Thank you very much! June 18, 2025 at 9:48 AM, 장정훈 : @MCS Can you check the SCS Cathode Roll Stk02 M01 Port Product Empty? Empty —> N/A Is it possible to change? June 18, 2025 at 9:48 AM, Mohammad Amir : Sure,checking. June 18, 2025 at 9:50 AM, Sazzad Bhai SKon : Yes possible to change, but according to the previous logs this bobbin is full. RBC1101 June 18, 2025 at 9:51 AM, Mohammad Amir : Currently Roll RBC101 located at M01. Currently this carrier shows Full. Please let me know the current location. June 18, 2025 at 9:52 AM, 장정훈 : The bobbin's clear. The bobbin sensors seem to be clear! June 18, 2025 at 9:52 AM, 장정훈 : There's nothing at the moment June 18, 2025 at 9:52 AM, Mohammad Amir : Thank you very much for the information! Information has been updated ✅. June 18, 2025 at 9:54 AM, 장정훈 : Please change N/A now! June 18, 2025 at 9:55 AM, Mohammad Amir : It has already been set to N/A from MCS and RTD side. ✅ Please let me know if you need further assistance. Thank you very much! June 18, 2025 at 9:57 AM, 장정훈 : There's no cargo, but I think I'm picking it up. I need FA Tech help! June 18, 2025 at 9:58 AM, 장정훈 : @FA Can you come to Cathode roll STK three? I need a sensor check! June 18, 2025 at 9:59 AM, Mohammad Amir : @FA @Simon Attila F. A. Please check SCS side ,from MCS and RTD side everything is okay. ✅ Thank you very much! June 18, 2025 at 10:07 AM, Oláh Rajmund : Gyertek légyszives anode press 8 R/W June 18, 2025 at 10:11 AM, Simon Attila F. A. : This message was deleted. June 18, 2025 at 10:12 AM, Simon Attila F. A. : Sorry, it works. June 18, 2025 at 10:13 AM, Mohammad Amir : Köszönom szepen 🙏 June 18, 2025 at 11:16 AM, Mohammad Amir : Dear @All, Next LOT available Electrode Slitter 1/2/4/5 :- Anode:03 Cathode:0 Slitter 3:- Anode: 67 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:04 Press 3/4:- Anode:14 Cathode:00 Thank you very much! June 18, 2025 at 11:38 AM, Mohammad Amir : @FA @Simon Attila F. A. Please check E0CNVC51_08_011 there is INV-01 Run time Over error since 11:29 and it is blocking materials recovery. Thank you very much! June 18, 2025 at 12:35 PM, Mohammad Amir : Dear @All, Next LOT available Electrode Slitter 1/2/4/5 :- Anode:04 Cathode:0 Slitter 3:- Anode: 67 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:04 Press 3/4:- Anode:14 Cathode:00 Thank you very much! June 18, 2025 at 12:41 PM, Mohammad Amir : @FA @Simon Attila F. A. Please check E0STK002_C01 there is Travel Driver error. Thank you very much! June 18, 2025 at 12:43 PM, Simon Attila F. A. : My colleague is arriving. June 18, 2025 at 12:43 PM, Mohammad Amir : Köszönom szepen 🙏 June 18, 2025 at 12:44 PM, Viczai Tamás : Megyünk June 18, 2025 at 1:38 PM, Czél Tamás : Srácok valakivel össze tudok futni Katód Slitt 2-nél? June 18, 2025 at 1:47 PM, Mohammad Amir : Dear @All, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:04 Cathode:02 Slitter 3:- Anode: 67 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:16 Press 3/4:- Anode:13 Cathode:00 Thank you very much! June 18, 2025 at 2:58 PM, Mohammad Amir : @FA @Viczai Tamás Please check LTA0444 ,it has job to go to STKA52_Z01. However we are receiving Slitter in 1F twinwait time error from SCS side. Thank you very much! June 18, 2025 at 3:11 PM, Mohammad Amir : @Farkas Tamàs Please arrange someone to check this issue ,as because of this issue Reel recovery has stopped. There is a long queue of recovery materials and it also stopped the delivery of reels. Thank you very much! June 18, 2025 at 3:16 PM, Farkas Tamàs : @Amir(MCS) E0STKA_C01 does not take the Tray from the E0STKA52_P04_OP01 port. June 18, 2025 at 3:17 PM, Mohammad Amir : Checking. June 18, 2025 at 3:24 PM, Mohammad Amir : I examined,Everything is good from MCS and RTD side. ✅ Please check physically this carrier , previously it had issue from SCS side and it was not moving. Thank you very much! June 18, 2025 at 3:25 PM, Farkas Tamàs : Ok, thanks June 18, 2025 at 3:25 PM, Mohammad Amir : You are welcome! June 18, 2025 at 3:34 PM, Farkas Tamàs : the carriers are physically present there. June 18, 2025 at 3:35 PM, Farkas Tamàs : Can you delete the task and manually re-enter it? June 18, 2025 at 3:35 PM, Mohammad Amir : All information is up to date in MCS and RTD already. Thank you very much! June 18, 2025 at 3:35 PM, Mohammad Amir : @Farkas Tamàs I try to solve. Thank you very! June 18, 2025 at 3:48 PM, Mohammad Amir : @Farkas Tamàs For LTA0444, Everything is good from MCS and RTD side, ✅. It has more priority but still crane doesn't pick it up,could you please check the position of this carrier physically? Is position correct? Thank you very much! June 18, 2025 at 3:49 PM, Farkas Tamàs : Yes June 18, 2025 at 3:51 PM, Farkas Tamàs : position correct June 18, 2025 at 3:51 PM, Mohammad Amir : Thank you very much for the confirmation. June 18, 2025 at 3:53 PM, Mohammad Amir : I have recreated the job and provided more priority. From MCS and RTD side everything is good ✅ Job is currently in Queue state. I am monitoring. Thank you very much! June 18, 2025 at 4:00 PM, Mohammad Amir : Please examine the port E0STKA52_P04_OP01. It seems like port issue. @Baek Hojong(백호종)FA Sir, Please check the port E0STKA52_P04_OP01 ,because of this issue materials recovery has stopped. Thank you very much! June 18, 2025 at 4:12 PM, Mohammad Amir : For E0STKA52_P04_OP01 ,it seems like problem exists from Track No . SCS side. Please investigate this port(Track No.) from SCS side. Thank you very much! June 18, 2025 at 4:46 PM, Czél Tamás : Sziasztok Katód Slitt 1-ről a 2nd RW-ről nem viszi el az anyagot a robot. Kérlek nézzétek meg Köszönöm June 18, 2025 at 4:47 PM, Viczai Tamás : Megyünk June 18, 2025 at 4:48 PM, Mohammad Amir : Dear @All, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:06 Cathode:03 Slitter 3:- Anode: 69 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:01 Press 3/4:- Anode:10 Cathode:02 Thank you very much! June 18, 2025 at 4:51 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STK001_C01 there is Materials Loosing (Right) error. Thank you! June 18, 2025 at 4:59 PM, Czél Tamás : Sziasztok Katódon megakadt a konveyor pálya, pls nézzetek rá. Köszönöm June 18, 2025 at 5:01 PM, Viczai Tamás : Megyünk June 18, 2025 at 5:18 PM, Czél Tamás : Sziasztok A probléma ugyanaz most is. Kérlek nézzétek meg Köszönöm June 18, 2025 at 5:18 PM, Viczai Tamás : Megyünk June 18, 2025 at 5:29 PM, Mohammad Amir : Dear @All, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:08 Cathode:03 Slitter 3:- Anode: 71 Cathode: 0 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:24 Press 3/4:- Anode:10 Cathode:04 Thank you very much! June 18, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (1):Böröcz Tamás Sick (0):- Holiday (1): Kovács Szabolcs, Magyar Balázs Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András , Kiss Balázs , Böröcz Tamás Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 18, 2025 at 7:41 PM, Turianytsia Olesia : Nincsenek tálcák Anode slitt 1-2 June 18, 2025 at 8:26 PM, Shakir (MCS) : Next Lot available Electrode Slitter 1/2/4/5 :- Anode:12 Cathode:03 Slitter 3:- Anode: 69 Cathode: 05 /////////////////////////////// Press 1/2/7/8:- Anode:02 Cathode:01 Press 3/4:- Anode:10 Cathode:02 Thank you June 18, 2025 at 8:42 PM, Majláth Martin : Sziasztok catod press 3 re kérnék segítséget June 18, 2025 at 8:42 PM, Oláh András : Mindjárt megyünk June 18, 2025 at 8:44 PM, Majláth Martin : Köszii June 18, 2025 at 8:55 PM, Oláh András : @Shakir (MCS) pls check cathode press3 LR. Thank you 🙏 June 18, 2025 at 8:56 PM, Shakir (MCS) : Checking June 18, 2025 at 8:58 PM, Shakir (MCS) : LR received successfully and Job initiated RBC1257 on the way to Press3 CA Thank you June 18, 2025 at 9:35 PM, Shakir (MCS) : @Fa Please check E0CNVA51_06_042 is OOS, reel tray stopped. Thank uou June 18, 2025 at 9:36 PM, Oláh András : Checking June 18, 2025 at 10:06 PM, 조혜근 : @FA An error occurred over the number of AGV retries on the RW side of the anode press unit 7. Please check it June 18, 2025 at 10:06 PM, Dániel Hufnágel : Omw June 18, 2025 at 10:16 PM, Dániel Hufnágel : Fixed! June 18, 2025 at 10:18 PM, 조혜근 : Thank you June 18, 2025 at 10:29 PM, 오승주 : There is a problem with AGV Rw 2, line 2 of the coating cathode. Please check. June 18, 2025 at 10:43 PM, 조혜근 : @FA There was an RW conveyor error in cathode slitter unit 3. Please check it June 18, 2025 at 10:43 PM, 조혜근 : RUN TIME OVER ERROR June 18, 2025 at 10:50 PM, 조혜근 : The supply of empty trays in anode slitter is slow. Please check it June 18, 2025 at 10:50 PM, 조혜근 : Is there a problem with anode reel warehouse unit 1? Are there no orders? June 18, 2025 at 10:50 PM, Shakir (MCS) : Currently Anode A52 crane have too many jobs that’s why you witnessed delay in supply June 18, 2025 at 10:51 PM, 조혜근 : Yes yes, why do you only use Unit 2? June 18, 2025 at 10:51 PM, 조혜근 : Can't you use Unit 1 together and solve it quickly? June 18, 2025 at 10:54 PM, 조혜근 : 금일 FA 야간 한국 담당자분 계실까요? 왜 음극 릴창고 2호기만 사용하고 1호기는 PORT TO PORT만 주문하고있는지 알수있나요? June 18, 2025 at 10:57 PM, Shakir (MCS) : I am manually releasing some reel trays from A51. June 18, 2025 at 10:57 PM, Koska Szilárd János : sziasztok idetudnátok jönni anód press 1 hez RW nél kiállt hibára a leszedő robot June 18, 2025 at 11:07 PM, ~Lidiia~리디 ~ : @ FA Hello! An error occurred on Anode press 8 with R/W-transfer. It is not possible to send the coil to the AGV. Please check this. Thank you! June 19, 2025 at 12:44 AM June 19, 2025 at 12:44 AM, Szarka Adrián : Katod roll raktárban a 22 számú agv az út közepén áll és csak csipog. Gyertek legyszi köszi June 19, 2025 at 12:45 AM, Szabadi Miki : Megyünk June 19, 2025 at 12:47 AM, Szabadi Miki : Már zötyög is tovább June 19, 2025 at 1:10 AM, Szarka Adrián : Köszönöm June 19, 2025 at 1:37 AM, Turianytsia Olesia : This message was deleted. June 19, 2025 at 1:37 AM, Turianytsia Olesia : Nincsenek tálcák Anode slitt 2 June 19, 2025 at 1:38 AM, Szabadi Miki : @Shakir (MCS) please check, thank you June 19, 2025 at 1:39 AM, Somoskövy Martin : Sziasztok. Cathode Press 2-re nem hoz az AGV anyagot. Megtudnátok nézni? Köszönöm. June 19, 2025 at 1:41 AM, Szabadi Miki : @Shakir (MCS) thank you June 19, 2025 at 1:45 AM, Shakir (MCS) : Press LR for Press2 CA June 19, 2025 at 1:50 AM, Shakir (MCS) : Releasing reel tray from STK51 also June 19, 2025 at 2:37 AM, Szabadi Miki : @Shakir (MCS) anod slitt 1,2,3,5 no empty tray again June 19, 2025 at 2:38 AM, Shakir (MCS) : Working on it June 19, 2025 at 2:38 AM, Szabadi Miki : Thank you ! June 19, 2025 at 4:05 AM, Koska Szilárd János : sziasztok anód press2 -gép környékén elakadtak az agv-k megnéznétek? June 19, 2025 at 5:38 AM, Koska Szilárd János : sziasztok Anód slitt 3 nál nemált be pozicióba az A oldali RW nél a robot ránéznétek? June 19, 2025 at 6:09 AM, Yanina : Anód slitt 3 transfer probléma R/W A June 19, 2025 at 6:10 AM, Skwarek Tibor : Megyünk June 19, 2025 at 6:10 AM, 이게리 : Jó reggelt! Porbetoltesre mikor érkeznek a kollégák ? 5:16-kor írtunk nekik, semmi válasz nélkül jelenleg is állunk. Cathode Hyundai line emiatt állni fog June 19, 2025 at 6:11 AM, 이게리 : Photo June 19, 2025 at 6:11 AM, 이게리 : Bocsánat 5:18* June 19, 2025 at 6:19 AM, Skwarek Tibor : @Oláh Rajmund légyszíves gyere ide. Pushert nem lehet ready pozícióba tenni a gépetejen. Így nem tudják az operátorok elindítani. June 19, 2025 at 6:30 AM, 임동현 : anode AGV 19,11 stopped June 19, 2025 at 6:32 AM, Simon Attila F. A. : Megyünk. June 19, 2025 at 6:39 AM, Simon Attila F. A. : Thay work. June 19, 2025 at 6:59 AM, Czél Tamás : Sziasztok Kérlek nézzetek rá hogy Katód oldalon miért nem jön a reel tálca. Köszönöm June 19, 2025 at 7:00 AM, Skwarek Tibor : Volt egy kis elakadás a cv n és a daru sem ment. Már működik June 19, 2025 at 7:00 AM, Mohammad Amir : Reels trays on the way now ✅. Thank you! June 19, 2025 at 7:38 AM, 지찬우 : cathode slitt 3 empty tray is not coming check please June 19, 2025 at 7:38 AM, Mohammad Amir : Checking. June 19, 2025 at 7:41 AM, Mohammad Amir : Empty trays on the way ✅. Thank you! June 19, 2025 at 7:45 AM, Mohammad Amir : Working on it. June 19, 2025 at 7:54 AM, Baek Hojong(백호종)FA : Day Shift 06.19 06:00 - 18:00 백호종 Baek hojong PM Assy Choi myungwoon Assy Kim junghee June 19, 2025 at 8:18 AM, Mohammad Amir : For your information:- Now issue has been resolved ✅ And whole CNVC51 has been filled with empty trays. Thank you very much! June 19, 2025 at 8:47 AM, Mohammad Amir : @FA Please check E0STKA31_C01 there is MCP safety relay off error. Thank you! June 19, 2025 at 8:47 AM, Skwarek Tibor : Checking June 19, 2025 at 8:52 AM, Skwarek Tibor : Done June 19, 2025 at 8:54 AM, 지찬우 : How many materials can be used for anode slit 3? June 19, 2025 at 8:55 AM, Mohammad Amir : Sure Sir,checking. June 19, 2025 at 8:55 AM, Mohammad Amir : There are 72 materials available. Thank you very much! June 19, 2025 at 9:22 AM, Baek Hojong(백호종)FA : @서지원 피엠님 아래와 같이 비가동 가능할지 확인부탁드려도될까요? @백호종PM_법인FA 금일 그리스 작업이 안된다고 하셔서 포일창고 일일 점검 작업 진행 하고자 합니다. 포일창고 1, 2 개소당 2-30분 비가동 가능한가요? June 19, 2025 at 9:23 AM, 지찬우 : @Baek Hojong(백호종)FA 음극슬리터 3호기 1ST 트레이ID 신호를 못받고 있는데 조치 가능할까요?? June 19, 2025 at 9:25 AM, Baek Hojong(백호종)FA : 분체창고 이슈대응중이라 일단 헝가리 테크니션 호출부탁드려도될까요? June 19, 2025 at 9:26 AM, 지찬우 : 헝가리 테크니션 조치 못하고 있습니다 June 19, 2025 at 9:27 AM, Baek Hojong(백호종)FA : 네 바로 보내드리도록 하겠습니다 June 19, 2025 at 9:43 AM, Mohammad Amir : @FA Please check one job is pending because E1PRA060_P02 is OOS. Thank you very much! June 19, 2025 at 9:43 AM, Simon Attila F. A. : Checking... June 19, 2025 at 9:47 AM, Simon Attila F. A. : This unit not in use now. June 19, 2025 at 9:47 AM, Mohammad Amir : In this case ,should I cancel the job? Thank you! June 19, 2025 at 9:49 AM, Simon Attila F. A. : can be deleted because there is only an empty core here, probably for testing purposes. June 19, 2025 at 9:50 AM, Mohammad Amir : Yes,it is a test job. I have cancelled it successfully ✅. Thank you! June 19, 2025 at 9:50 AM, Simon Attila F. A. : Thank you too. June 19, 2025 at 10:00 AM, 지찬우 : This message was deleted. June 19, 2025 at 10:01 AM, Baek Hojong(백호종)FA : 다시한번더 확인하겠습니다 요청드렸는데 이직인가봐요 June 19, 2025 at 11:32 AM, 장승환 : @fa 양극 2라인 이재기 조치가 필요한데 확인 가능하실까요? June 19, 2025 at 11:37 AM, Baek Hojong(백호종)FA : 프레스인가요? June 19, 2025 at 2:02 PM, Mohammad Amir : Dear @All, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:02 Cathode:00 Slitter 3:- Anode: 73 Cathode: 13 /////////////////////////////// Press 1/2/7/8:- Anode:20 Cathode:02 Press 3/4:- Anode:127 Cathode:39 Thank you very much! June 19, 2025 at 3:41 PM, Mohammad Amir : @FA Please check and confirm is E0CNVC51 is under maintenance? Thank you! June 19, 2025 at 3:43 PM, Oláh Rajmund : Cathode slitt 3 meg állt a conveyor rá nézték légyszives June 19, 2025 at 3:44 PM, Skwarek Tibor : E0STKC34 TR ips sensor fault. No signal. AGV s can t load/ unload. I put in to maintanence. Would like to ask for help. June 19, 2025 at 3:45 PM, Skwarek Tibor : Megyek June 19, 2025 at 3:48 PM, Skwarek Tibor : It s working now June 19, 2025 at 5:54 PM, Hári Zoltàn : Szevasztok! Technikust kernek a katod 1 2es rw-re! Surgos lenne! Köszi! June 19, 2025 at 5:55 PM, Oláh András : Megyünk June 19, 2025 at 5:57 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_034 LTA0378 Stuck, Not moving for long time , blocked all reel trays. Thank you June 19, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1): Magyar Balázs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 19, 2025 at 6:06 PM, Shakir (MCS) : @Oláh András please check this June 19, 2025 at 6:10 PM, Oláh András : Checking June 19, 2025 at 6:14 PM, Szabadi Miki : This message was deleted. June 19, 2025 at 6:15 PM, Szabadi Miki : Now it is working June 19, 2025 at 6:15 PM, Shakir (MCS) : Thank you June 19, 2025 at 6:18 PM, 오승주 : We requested 2nd rewinder AGV of cathode 1 line, but it is not coming. Please check June 19, 2025 at 6:19 PM, Szabadi Miki : @Shakir (MCS) please check thank you June 19, 2025 at 6:22 PM, 오승주 : Problems are occurring after 2 consecutive times. I hope there will be workers who can respond June 19, 2025 at 6:23 PM, Shakir (MCS) : UR failed because of carrier location mismatch, Could you please tell which carrier at E1CTC010_P02. June 19, 2025 at 6:24 PM, Shakir (MCS) : In MCS RBC1540 location at STKC31(0100605) June 19, 2025 at 6:24 PM, Szabadi Miki : RBC1540 June 19, 2025 at 6:24 PM, Shakir (MCS) : Okay working on it June 19, 2025 at 6:25 PM, Szabadi Miki : Thank you June 19, 2025 at 6:26 PM, Shakir (MCS) : Please Press UR again June 19, 2025 at 6:27 PM, Oláh András : Agv4 comes? June 19, 2025 at 6:27 PM, Shakir (MCS) : Now Issue has been resolved AGV22 on the way Thank you June 19, 2025 at 6:31 PM, Shakir (MCS) : AGV 04 assigned now ✅ June 19, 2025 at 6:32 PM, Oláh András : Yes, thank you so much June 19, 2025 at 6:52 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_047 there is port interface error Thank you June 19, 2025 at 6:56 PM, Erik Gerzsenyi : Katod slitt 3 conveyor megallt June 19, 2025 at 7:01 PM, Oláh András : Checking June 19, 2025 at 9:34 PM, Horváth Attila : Gyertek légyszives katod jumbo raktárhoz June 19, 2025 at 9:34 PM, Oláh András : Megyünk June 19, 2025 at 9:38 PM, Oláh András : @Shakir (MCS) can u block E0STKC34? Transfer has a problem, so we dont want any stuck orders there. Thank you June 19, 2025 at 9:40 PM, Shakir (MCS) : Already Port P01 block or OOS. June 19, 2025 at 9:43 PM, Oláh András : Is it enough for disable the orders? June 19, 2025 at 9:44 PM, Shakir (MCS) : For now there is No order from STKC34 June 19, 2025 at 9:45 PM, Shakir (MCS) : Make it OOS from SCS, will blocked order June 19, 2025 at 9:50 PM, Oláh András : So if we make crane OOS in SCS than production pressing LR, MCS wont make the order?. June 19, 2025 at 9:51 PM, Dániel Hufnágel : Port passive now can you check me please still generate order? June 19, 2025 at 9:51 PM, Shakir (MCS) : Yes, Then MCS indicate to alternate storage, all order forward to other storrage. June 19, 2025 at 9:52 PM, Shakir (MCS) : Yes generated one order June 19, 2025 at 9:53 PM, Shakir (MCS) : It is alternated not transfer June 19, 2025 at 9:54 PM, Oláh András : Thank you sir! June 19, 2025 at 9:54 PM, Shakir (MCS) : For this case alternate storage is STKC31,32,33. June 19, 2025 at 9:55 PM, Shakir (MCS) : You’re welcome June 19, 2025 at 9:55 PM, Oláh András : And thanks for the informations 👍🏻 June 19, 2025 at 9:56 PM, Shakir (MCS) : @FA Please check E0STKC31, SCP Main Power CP Trip. Thank you June 19, 2025 at 10:07 PM, Shakir (MCS) : FYI: There are 2 order created from STKC34, one for Slitt3 and other for Press3, It will not transfer. Delay in production. June 19, 2025 at 10:08 PM, Shakir (MCS) : Press1*** June 19, 2025 at 10:08 PM, Oláh András : Thats why im asking you to block it June 19, 2025 at 10:09 PM, Oláh András : We cant use the transfer of C34 June 19, 2025 at 10:09 PM, Shakir (MCS) : I make it OOS from MCS June 19, 2025 at 10:10 PM, Shakir (MCS) : I Cancelled the created Job the press LR again June 19, 2025 at 10:11 PM, Shakir (MCS) : For Slitt3 and Press1 please press LR again June 19, 2025 at 10:11 PM, Oláh András : Thank you! @Erik Gerzsenyi legyetek szívesek katod slitt3nál és press1-nél újra LR-t nyomni June 19, 2025 at 10:16 PM, Shakir (MCS) : Now for Slitt3 and Press1 roll coming from STKC31. Please Let me know I will make it STKC34 Inservice. Thank you June 19, 2025 at 10:37 PM, Horváth Attila : Anod jumbo raktárhoz gyertek légyszi. Fényfüggőnybe bele mentek véletlenül June 19, 2025 at 10:37 PM, Oláh András : Megyünk June 19, 2025 at 10:48 PM, Shakir (MCS) : @FA Please check E0STKC32, Load collapse error. Thank yiu June 19, 2025 at 11:17 PM, Shakir (MCS) : Next Lot available Electrode Slitter 1/2/4/5 :- Anode:01 Cathode:00 Slitter 3:- Anode: 67 Cathode: 09 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:64 Press 3/4:- Anode:127 Cathode:53 Thank you June 20, 2025 at 1:17 AM June 20, 2025 at 1:17 AM, Shakir (MCS) : Next Lot available Electrode Slitter 1/2/4/5 :- Anode:00 Cathode:00 Slitter 3:- Anode: 66 Cathode: 08 /////////////////////////////// Press 1/2/7/8:- Anode:01 Cathode:66 Press 3/4:- Anode:126 Cathode:57 Thank you June 20, 2025 at 2:43 AM, Yena Valerii : Hello, on 1 press cathode the material does not go, please check June 20, 2025 at 2:46 AM, Shakir (MCS) : Do you means U/W or R/W?? June 20, 2025 at 2:48 AM, Shakir (MCS) : @FA @Oláh András June 20, 2025 at 2:52 AM, Oláh András : @Szabadi Miki June 20, 2025 at 2:55 AM, Yena Valerii : sorry, U/W June 20, 2025 at 2:57 AM, Shakir (MCS) : Please Press LR June 20, 2025 at 2:57 AM, Szabadi Miki : Done June 20, 2025 at 2:59 AM, Shakir (MCS) : RBC1630 Roll to Press1 CA AGV01 on the way Thank you June 20, 2025 at 3:00 AM, Yena Valerii : thanks June 20, 2025 at 3:04 AM, Shakir (MCS) : Now, AGV13 assigned and on the way to press1 CA June 20, 2025 at 3:51 AM, Oláh András : @Shakir (MCS) pls check material on E0STKA33 P01. Where should we send it? I cancelled the order becouse no agv was joined June 20, 2025 at 3:55 AM, Shakir (MCS) : At E0STKA33_P01 has RBA1489 destination was E1PRA020_P01, Job cancelled at 3:48. June 20, 2025 at 3:55 AM, Oláh András : Simply lovely June 20, 2025 at 3:56 AM, Oláh András : Should we send it manually or send back? June 20, 2025 at 3:57 AM, Shakir (MCS) : Please send back to warehouse and press LR press2 CA June 20, 2025 at 3:57 AM, Oláh András : Do you mean Anode? 😁 June 20, 2025 at 3:57 AM, Shakir (MCS) : Sorry yes Anode June 20, 2025 at 4:00 AM, Oláh András : I checked anod press2, buffer is empty so i send it to press2. Thank you June 20, 2025 at 4:05 AM, Shakir (MCS) : One job from STKA32 is also assigned to Press2 AN June 20, 2025 at 4:09 AM, Oláh András : Pls abort that thank you June 20, 2025 at 4:10 AM, Shakir (MCS) : Job cancelled from STKA32. June 20, 2025 at 4:13 AM, Shakir (MCS) : AGV18 idle with alarm near STKA32 June 20, 2025 at 4:14 AM, Oláh András : We working on A32 transfer June 20, 2025 at 4:14 AM, Oláh András : And agv18 want to go in June 20, 2025 at 6:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 20, 2025 at 6:22 AM, Mohammad Amir : Good morning everyone, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:00 Cathode:00 Slitter 3:- Anode: 69 Cathode: 11 /////////////////////////////// Press 1/2/7/8:- Anode:11 Cathode:01 Press 3/4:- Anode:121 Cathode:68 Thank you very much! June 20, 2025 at 6:22 AM, 지찬우 : Materials are not coming to Cathode Press 1,2. Please check June 20, 2025 at 6:23 AM, Mohammad Amir : Sure, checking ! June 20, 2025 at 6:25 AM, Mohammad Amir : Sir, Now,AGV#7 on the way to cathode press -2. ✅ And AGV#1 on the way to Press -1 CA. ✅. I am monitoring. Thank you very much! June 20, 2025 at 6:32 AM, Mohammad Amir : @Mr.Miti (미티) FA On the request of @Oláh András we have made E0STKC34 OOS. Please inform me when you would like us to make it In-service again? Thank you very much! June 20, 2025 at 6:34 AM, Mohammad Amir : Update:- AGV #7 and AGV#1 has successfully delivered the Roll to press Cathode -2&1 consequently ✅. Thank you very much! June 20, 2025 at 6:35 AM, Mr.Miti (미티) FA : Of course! Thank you! June 20, 2025 at 7:05 AM, Davaa left this chatroom. June 20, 2025 at 7:46 AM, Atif/Ivancsa FA : Hello AGV 16 stopped not transferring material to Anode warehouse because already there are 2 rolls occupied the place now it stuck system shows transferring E0STKA31-TR-MCP Help!!! Thank you June 20, 2025 at 7:59 AM, Margaret : Hello. Come pls. problem with the transfer slitt 3 anod June 20, 2025 at 8:02 AM, 임동현 : anode sliter 3 conveyor not working June 20, 2025 at 8:07 AM, Mr.Miti (미티) FA : Solved June 20, 2025 at 8:18 AM, Mohammad Amir : Good morning everyone, Next Lot available Electrode Slitter 1/2/4/5 :- Anode:00 Cathode:00 Slitter 3:- Anode: 67 Cathode: 10 /////////////////////////////// Press 1/2/7/8:- Anode:12 Cathode:80 Press 3/4:- Anode:121 Cathode:67 Thank you very much! June 20, 2025 at 9:02 AM, Atif/Ivancsa FA : Cathode ware house E0STKA35-STK-MCP shows material transferring but AGV 12 is waiting and material isn't transferred for a long time. Need Help!! Thank you June 20, 2025 at 9:08 AM, adambenczik : Solved June 20, 2025 at 9:09 AM, Atif/Ivancsa FA : Thank you June 20, 2025 at 10:20 AM, Szeitz Flórián : Anód press 8ra nem érkezik az anyag megnéznètek légyszives. Köszönöm June 20, 2025 at 10:25 AM, Mohammad Amir : Sure checking! June 20, 2025 at 10:26 AM, Mohammad Amir : I am working to solve the issue. Thank you very much! June 20, 2025 at 10:29 AM, Mohammad Amir : This message was deleted. June 20, 2025 at 10:30 AM, adambenczik : I solved it June 20, 2025 at 10:30 AM, Mohammad Amir : Thank you very much! June 20, 2025 at 10:32 AM, Mohammad Amir : There was a carrier RBA1554 which exists on E0STKA34_P01 and it was blocking the task for Anode press-8. Now issue has been solved and as soon as RBA1554 will move ,Assigned Roll RBA1560 will come to Andoe press-8. Thank you very much! June 20, 2025 at 10:41 AM, Mohammad Amir : Now AGV#25 on the way to Andoe press-8. ✅ Thank you very much! June 20, 2025 at 10:46 AM, Mohammad Amir : Please cancel the job you sent the roll to Press -8 ,there is already one automatic job exists. Thank you very much! June 20, 2025 at 10:50 AM, Mohammad Amir : For your information:- Roll RBA1554 has already been delivered to Anode Press -8 ,it was manual job , created by operator. However there is an automatic job with RBA1560on AGV#25 ,it is also on the way to Anode press-8. So,Now this AGV#25 will wait as Roll already delivered manually to Anode press -8. Thank you very much! June 20, 2025 at 11:31 AM, Mohammad Amir : @FA @adambenczik Please check E0STKA52_P01 there is Data mismatch error and it has blocked the materials recovery. Thank you very much! June 20, 2025 at 11:39 AM, Margaret : Hello. Come pls. problem with the transfer slitt 5 anod June 20, 2025 at 11:40 AM, adambenczik : I'm here June 20, 2025 at 12:10 PM, adambenczik : Solved June 20, 2025 at 1:14 PM, Vörös Geri : Katód press 2 re nem hoz anyagot az AGV.megnéznétek?köszi June 20, 2025 at 1:17 PM, Mohammad Amir : Issue has been resolved ✅. Please press LR again. Thank you very much! June 20, 2025 at 1:40 PM, Mohammad Amir : @Vörös Geri Please press LR for Cathode press-2 ,there was an issue that's why last LR was unsuccessful. Now issue is solved ✅. We need LR ,if you would like to receive materials. Thank you very much! June 20, 2025 at 2:44 PM, Mohammad Amir : Dear @All Next Lot available Electrode Slitter 1/2/4/5 :- Anode:01 Cathode:00 Slitter 3:- Anode: 39 Cathode: 05 /////////////////////////////// Press 1/2/7/8:- Anode:01 Cathode:80 Press 3/4:- Anode:117 Cathode:67 Thank you very much! June 20, 2025 at 2:53 PM, Mohammad Amir : This message was deleted. June 20, 2025 at 3:05 PM, Vörös Geri : Katód slitt 4 transfer megált.megnéznétek?köszi June 20, 2025 at 3:07 PM, Mr.Miti (미티) FA : Omw June 20, 2025 at 3:07 PM, Mohammad Amir : @adambenczik Please check E0STKA31_C01 there is Fork#1 receive data reset request error. Thank you very much! June 20, 2025 at 3:13 PM, adambenczik : Solved June 20, 2025 at 3:13 PM, adambenczik : Thank you for your work June 20, 2025 at 3:21 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check same issue occured again for Slitter -4 Andoe(P12) gas data loss Error Thank you very much June 20, 2025 at 3:21 PM, 임동현 : Cathode slitt 4 tray not working June 20, 2025 at 3:22 PM, Mohammad Amir : Sir, Because of this issue ,it is not working i have informed tej FA team, already. Thank you very much? June 20, 2025 at 3:25 PM, Vörös Geri : Katód press 7 re kitudnátok menni megált a leszedő robot.köszi June 20, 2025 at 3:42 PM, Oleksii Krasnoshchok : Please come anode press 1 r/w transfer stopped June 20, 2025 at 3:43 PM, Mr.Miti (미티) FA : Türelem és érkezem June 20, 2025 at 3:49 PM, Mr.Miti (미티) FA : Kész June 20, 2025 at 3:49 PM, Mr.Miti (미티) FA : Coming June 20, 2025 at 3:50 PM, Oleksii Krasnoshchok : This message was deleted. June 20, 2025 at 3:51 PM, Oleksii Krasnoshchok : It’s now all good June 20, 2025 at 3:59 PM, Margaret : Come pls. problem with the transfer slitt 1 anod June 20, 2025 at 3:59 PM, Mr.Miti (미티) FA : Coming June 20, 2025 at 4:09 PM, Mr.Miti (미티) FA : Solved June 20, 2025 at 4:16 PM, Mohammad Amir : Dear @All Next Lot available Electrode Slitter 1/2/4/5 :- Anode:07 Cathode:00 Slitter 3:- Anode: 67 Cathode: 04 /////////////////////////////// Press 1/2/7/8:- Anode:00 Cathode:79 Press 3/4:- Anode:123 Cathode:67 Thank you very much! June 20, 2025 at 4:21 PM, Atif/Ivancsa FA : Hello In Coating Anode AGV9 has Vibration detection Sensor Communication Error, I tried but not be able to solve it. Need help!! Thank you June 20, 2025 at 4:21 PM, Mr.Miti (미티) FA : Coming June 20, 2025 at 4:33 PM, Oleksii Krasnoshchok : Anode press 2 u/w so long wait Agv June 20, 2025 at 4:33 PM, Mohammad Amir : Checking June 20, 2025 at 4:34 PM, Mohammad Amir : Unfortunately currently there is no material available. There is an active LR as soon as material will be available,it will reach Anode press -2 via AGV. Thank you very much! June 20, 2025 at 4:43 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 코터 음극4라인 가동계획이 있으시면 저희에게 사전에 공유 부탁드립니다. June 20, 2025 at 6:08 PM, Viktor Vadas : Sziasztok! Coating katod 1 2-es rewinderre kellene segitseg! June 20, 2025 at 6:08 PM, Viktor Vadas : Koszonom! June 20, 2025 at 6:10 PM, Viktoriia Hleba : Sziasztok 5 slitter anode nincs Agv- 62 perc . Please check June 20, 2025 at 6:11 PM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert légyszi nézzétek meg, mi porra megyünk June 20, 2025 at 6:11 PM, Szücs Géza FT-B : @mcs please June 20, 2025 at 6:12 PM, waseem/ Iváncsa Fa : Solve June 20, 2025 at 6:13 PM, 서지원 : 차주 월요일부터 음극4라인 양산 예정입니다. 코터 조건 설정 상황에 따라 오전일지 오후일지 미정이라 스타트하는대로 알려드리겠습니다. June 20, 2025 at 6:13 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.20 "B" műszak, 9+1+3/12+2 Tech, 1SL Overtime(1): Kertész Dániel Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kertész Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 20, 2025 at 6:16 PM, Czeilinger Krisztián : Rendjén June 20, 2025 at 6:16 PM, Czeilinger Krisztián : Oke June 20, 2025 at 6:16 PM, Czeilinger Krisztián : @Mohammad Amir please check. June 20, 2025 at 6:17 PM, VK (mcs) : There is no LR Last one was at 1:31 AM Please apply LR. June 20, 2025 at 6:18 PM, Szücs Géza FT-B : @Viktoriia Hleba kérjetek újra légyszives June 20, 2025 at 6:19 PM, Viktoriia Hleba : ok June 20, 2025 at 6:20 PM, Czeilinger Krisztián : A kérelmet nyomja be megint. June 20, 2025 at 6:22 PM, Czeilinger Krisztián : @Viktoriia Hleba slitter 5 anode-ra a a 25-ös AGV viszi a rollt. June 20, 2025 at 6:23 PM, Viktoriia Hleba : köszönöm June 20, 2025 at 6:33 PM, Csanálosi Gábor FA : @Czeilinger Krisztián anod slitter 1-2 között talca elakadás a konveyoron June 20, 2025 at 6:36 PM, Czeilinger Krisztián : Kész. June 20, 2025 at 7:44 PM, Nagy Dávid 4 : Anod slitt3 AGV stop U/W A help help help köszönöm szépen June 20, 2025 at 7:53 PM, Rácz Dániel / FA : @VK (mcs) please check anode 51 conveyor why moving slowly to the warehouse the full reels. Thank you June 20, 2025 at 8:01 PM, Rácz Dániel / FA : E0CNVA51 June 20, 2025 at 8:06 PM, VK (mcs) : There is many orders to STK A52 June 20, 2025 at 8:07 PM, Rácz Dániel / FA : Okay, thnak you June 20, 2025 at 8:07 PM, Szücs Géza FT-B : @VK (mcs) Important! Slitt havent empty reel tray, it is needeng. But NOT from E0STKA52, this wh very busy. Slitting needing empty trays from E0STKA51. there are few tasks in this STK. June 20, 2025 at 8:13 PM, VK (mcs) : Yes I see the situation, according to the rule, when STK capacity rate is higher than 90% then destination is changes to A52 , that’s why all full trays are transferring to A52. But we will change the direction. Thx June 20, 2025 at 8:20 PM, Nagy Dávid 4 : Anod slit 2 nincs tarca help help köszönöm szépen June 20, 2025 at 8:21 PM, Rácz Dániel / FA : Áll az anód 51 es raktár, dolgozunk a hiábn June 20, 2025 at 8:21 PM, Viktoriia Hleba : anode convejor stop( lift stop) please check June 20, 2025 at 8:36 PM, Nagy Dávid 4 : anod slitt 1 nincs anyag rá tudnátok nézni légyszíves köszönöm szépen June 20, 2025 at 8:38 PM, Rácz Dániel / FA : @VK (mcs) please chekc ! Tha yk you June 20, 2025 at 8:39 PM, VK (mcs) : There is no available material. June 20, 2025 at 8:48 PM, Rácz Dániel / FA : Thank you Sir June 20, 2025 at 8:51 PM, Szücs Géza FT-B : @VK (mcs) can you check who create order to LTA0165? June 20, 2025 at 8:56 PM, Szücs Géza FT-B : not need, thhank you June 20, 2025 at 8:56 PM, VK (mcs) : SGBC060 June 20, 2025 at 8:57 PM, Szücs Géza FT-B : @Böröcz Tamás CNVA51-en eltűnt egy destinatiion June 20, 2025 at 8:57 PM, 김지수PM(Gyuri)_FA : Created destination of 1065 again (e0cnva51) June 20, 2025 at 8:57 PM, Szücs Géza FT-B : kérlek szépen pótoldd June 20, 2025 at 8:58 PM, VK (mcs) : The reason of the phenomenon is: job didn’t completely deleted from system. So carrier transferred to STKA51 and then returned back to conveyor . June 20, 2025 at 9:05 PM, Csicskovics Balázs : Cathode press 7 re nem jön az AGV. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 9:07 PM, Viktoriia Hleba : Anod slitt3 AGV stop U/W A June 20, 2025 at 9:13 PM, VK (mcs) : @FA Please check Cathode roll STK C34 port 1 is out of service. June 20, 2025 at 9:23 PM, Czeilinger Krisztián : @VK (mcs) please check. June 20, 2025 at 9:25 PM, VK (mcs) : Job assigned but auto-port cathode roll STKC34 -Port 1 is out of service. June 20, 2025 at 9:26 PM, Czeilinger Krisztián : Thank you. :) June 20, 2025 at 9:29 PM, Csicskovics Balázs : És akkor? June 20, 2025 at 9:29 PM, Czeilinger Krisztián : Pillanat. June 20, 2025 at 9:29 PM, Csicskovics Balázs : Rendben June 20, 2025 at 9:31 PM, Czeilinger Krisztián : Még nincs egyenlőre elérhető AGV. Nyomd meg a kérelmet még egyszer pls. June 20, 2025 at 9:37 PM, VK (mcs) : Can you please check E0STKC34 port 1 It’s out of service and 4 jobs are waiting. Press 1/2/7. and Slitter 3 Thx June 20, 2025 at 9:38 PM, Szücs Géza FT-B : @Czeilinger Krisztián @Pálosi Róbert légyszives nézzétek meg June 20, 2025 at 9:39 PM, Czeilinger Krisztián : Rendben. June 20, 2025 at 9:39 PM, Czeilinger Krisztián : Going June 20, 2025 at 9:42 PM, Nagy Dávid 4 : Anod slitt 3 konvejor megált help help köszönöm szépen June 20, 2025 at 9:42 PM, Czeilinger Krisztián : Nemsokára megyünk. June 20, 2025 at 9:49 PM, Czeilinger Krisztián : Solved. ,E0STKC34. June 20, 2025 at 9:51 PM, Czeilinger Krisztián : Go ing June 20, 2025 at 9:58 PM, Czeilinger Krisztián : Kész June 20, 2025 at 11:06 PM, Nagy Dávid 4 : Anod slitt3 AGV stop U/W A help help köszönöm szépen June 20, 2025 at 11:06 PM, Nagy Dávid 4 : Robot probléma June 20, 2025 at 11:13 PM, Rácz Dániel / FA : Mindjárt megyünk June 20, 2025 at 11:26 PM, Nagy Dávid 4 : anod slitt 1 nincs AGV 20p help help köszönöm szépen June 20, 2025 at 11:29 PM, Viktoriia Hleba : anode slitt 5 nincs Agv-20 perc. Please check June 20, 2025 at 11:30 PM, VK (mcs) : There is no available material June 20, 2025 at 11:32 PM, Rácz Dániel / FA : @VK (mcs) please chekc, thank sou June 20, 2025 at 11:34 PM, VK (mcs) : Next LOT available Electrode Slitter 1/2/4/5 Anode:00 Cathode:00 Slitter 3/4 Anode:64 Cathode:11 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8 Anode:00 Cathode:98 Press 3/4 Anode:119 Cathode:62 June 20, 2025 at 11:35 PM, VK (mcs) : This one also no available material June 20, 2025 at 11:37 PM, VK (mcs) : Right now , RBA1677 assigned to anode slitter 5th June 20, 2025 at 11:43 PM, Rácz Dániel / FA : Thank you Sor June 21, 2025 at 12:30 AM June 21, 2025 at 12:30 AM, Anton Mashchenko : Cathode press 2, AGV not coming 10 min! Help! June 21, 2025 at 12:31 AM, VK (mcs) : AGV 16 is on the way June 21, 2025 at 12:59 AM, Nagy Dávid 4 : Anod slitt3 transfer problema help help köszönöm szépen June 21, 2025 at 1:03 AM, Czeilinger Krisztián : Megyünk June 21, 2025 at 1:06 AM, Czeilinger Krisztián : Pontosítok,megyek June 21, 2025 at 1:10 AM, Czeilinger Krisztián : Kész. June 21, 2025 at 1:28 AM, Anton Mashchenko : Cathode press 3, AGV not coming 10 min! Help! June 21, 2025 at 1:34 AM, Czeilinger Krisztián : @VK (mcs) please check cathode press 3 Agv not coming. June 21, 2025 at 1:34 AM, 김지수PM(Gyuri)_FA : @VK (mcs) please make a E0STKC34 OOS, there is some problem on C34. Thanks in advance! June 21, 2025 at 1:34 AM, VK (mcs) : Cathode roll STK C34 port 1 is out of service now June 21, 2025 at 1:35 AM, 방혁 PM(Bang.Hyuk) FA : There is a problem there. I won't operate until it's resolved June 21, 2025 at 1:36 AM, 조혜근 : Can you send RBC1042 to cathode slitter unit 1? June 21, 2025 at 1:37 AM, 조혜근 : @VK (mcs) June 21, 2025 at 1:38 AM, Böröcz Tamás : Can you redirect tasks elsewhere? June 21, 2025 at 1:38 AM, VK (mcs) : For Press 7 and 3 jobs assigned from STKC34 but on the request I changed it to out of service and current jobs was deleted by me. Now new jobs assigned from another STKs. Thx June 21, 2025 at 1:39 AM, Böröcz Tamás : Thanks June 21, 2025 at 1:40 AM, Böröcz Tamás : Today night it will not work June 21, 2025 at 1:41 AM, 조혜근 : RBC1042 is located at E0STKC32. Can you send it to the cathode slitter unit 1? June 21, 2025 at 1:42 AM, VK (mcs) : Checking June 21, 2025 at 1:42 AM, 조혜근 : Sorry, it's E0STKC33 June 21, 2025 at 1:44 AM, Viktoriia Hleba : 5 slitt anode nincs Agv- 25 perc June 21, 2025 at 1:44 AM, VK (mcs) : There is job to cathode slitter 1 already. Located in STKC35 and waiting for AGV. Should I transfer RBC1042 ? June 21, 2025 at 1:46 AM, VK (mcs) : There is no material June 21, 2025 at 1:47 AM, 조혜근 : That's not true June 21, 2025 at 1:47 AM, 조혜근 : RBC1042 and RBC4382 are asking because they do not go to slitter June 21, 2025 at 1:47 AM, 조혜근 : These are not going to the slitter because of some problem June 21, 2025 at 1:48 AM, 조혜근 : But we want to send this to the slitter June 21, 2025 at 1:48 AM, VK (mcs) : Let me check the material segment June 21, 2025 at 1:55 AM, VK (mcs) : These rolls are not in available material, because in MES, status of Judge is Skip.! Please check the MES June 21, 2025 at 1:56 AM, Nagy Dávid 4 : Anod slitt3 transfer problema help help help köszönöm szépen June 21, 2025 at 1:56 AM, Rácz Dániel / FA : Jövök June 21, 2025 at 1:57 AM, Nagy Dávid 4 : Csak 1 órája várunk rá June 21, 2025 at 1:58 AM, 조혜근 : Okay, thank you for checking June 21, 2025 at 2:07 AM, Rácz Dániel / FA : Köszi a türelmet, C34 nél voltunk meg a poron is. June 21, 2025 at 2:07 AM, Rácz Dániel / FA : Kész June 21, 2025 at 2:07 AM, Nagy Dávid 4 : Köszönöm szépen June 21, 2025 at 2:25 AM, Viktoriia Hleba : 5 slitt anode nincs Agv.Please check June 21, 2025 at 2:29 AM, VK (mcs) : AGV#7 is on the way. June 21, 2025 at 2:39 AM, Csicskovics Balázs : Cathode press 7 R/W robot hiba. Gyertek légyszíves. Köszönöm June 21, 2025 at 2:46 AM, Viktoriia Hleba : anod slitt 1 nincs AGV 15 perc June 21, 2025 at 2:46 AM, 방혁 PM(Bang.Hyuk) FA : @MCS can you check command status for E1PRC020_P01? June 21, 2025 at 2:47 AM, VK (mcs) : Checking June 21, 2025 at 2:52 AM, VK (mcs) : Job assigned from STK C32 But there is carrier in STKC32 port 1 and it is waiting because slitter 4th port 1 is out of service. June 21, 2025 at 2:52 AM, VK (mcs) : @manufacturing There is transfer job to the slitter 4 port 1 but it’s out of service, please check it. Thx June 21, 2025 at 2:54 AM, 방혁 PM(Bang.Hyuk) FA : I turn on the slit 4 p01 June 21, 2025 at 2:55 AM, VK (mcs) : Now AGV assigned. Thx June 21, 2025 at 3:01 AM, Nagy Dávid 4 : Anod slitt3 transfer problema help help köszönöm szépen June 21, 2025 at 3:08 AM, Czeilinger Krisztián : Kész June 21, 2025 at 3:24 AM, Viktoriia Hleba : 30 perc nincs Agv - 5 slitt anode June 21, 2025 at 3:26 AM, VK (mcs) : AGV#22 is on the way June 21, 2025 at 3:28 AM, Csanálosi Gábor FA : @Czeilinger Krisztián @Pálosi Róbert Ca slitt 2 elakadás June 21, 2025 at 3:28 AM, Dana Honak : Cathode slitt 2 r/w robot problema ! June 21, 2025 at 3:28 AM, Pálosi Róbert : Megyek June 21, 2025 at 3:38 AM, Czeilinger Krisztián : Kész June 21, 2025 at 3:38 AM, Pálosi Róbert : Kész June 21, 2025 at 3:39 AM, Czeilinger Krisztián : Szék June 21, 2025 at 3:40 AM, Dana Honak : Maintenance Response Check CATHODE SLITT 2 Robot problema r/w Maintenance Call : 3:28 Maintenance Arrive : 3:28 Maintenance Finish : 3:39 June 21, 2025 at 3:42 AM, Anton Mashchenko : Не туда) June 21, 2025 at 4:27 AM, Viktoriia Hleba : 5 slitt anode nincs Agv - 30 perc . Please check June 21, 2025 at 4:30 AM, 김지수PM(Gyuri)_FA : Vc01 is going June 21, 2025 at 5:09 AM, Nagy Dávid 4 : Anod roll raktár help köszönöm szépen June 21, 2025 at 5:45 AM, waseem/ Iváncsa Fa : Anode coating line 1 r/w 1 have some technical problem. Buffer is not working Thank you June 21, 2025 at 5:49 AM, waseem/ Iváncsa Fa : Cathode stk C33 have some error please check it The roll is stuck between Thank you June 21, 2025 at 6:16 AM, Sárvári Márk : Sziasztok Segítséget kérnénk Anod 1-re, R/W 1-re. June 21, 2025 at 6:17 AM, Mr.Miti (미티) FA : Jövök June 21, 2025 at 6:19 AM, Mr.Miti (미티) FA : Kész June 21, 2025 at 6:29 AM, duzzaman Md (MCS) : @FA Please check E0STKC33_C01 Workable double storage error. Thank you June 21, 2025 at 6:35 AM, Mr.Miti (미티) FA : The situation here is a little more complicated than that, but I'm here working on a solution to the problem. June 21, 2025 at 6:52 AM, Margaret : Hello. Come pls. problem with the transfer slitt 3 anod June 21, 2025 at 6:59 AM, gutenkunstabelzoltan : Kesz June 21, 2025 at 7:33 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 21, 2025 at 7:54 AM, Szeitz Flórián : Anód oldalon megállt a Conveyor pálya megnéznétek légyszives köszönöm June 21, 2025 at 8:04 AM, adambenczik : Kissé be van lassulva a raktár June 21, 2025 at 9:58 AM, Atif/Ivancsa FA : Hello Anode warehouse STKA32 has some issues The AGV 22 Retry count exceeds 4 times. Neep help!!! Thank you June 21, 2025 at 10:05 AM, adambenczik : We will take AGV#22 out of manufacturing June 21, 2025 at 10:16 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 1 nincs tray ID , gyertek nézzetek meg légyszíves June 21, 2025 at 10:17 AM, Karina Lyzanets : Köszönöm June 21, 2025 at 10:17 AM, Szeitz Flórián : Jelenleg ez nem kicsit . Állnak a Slitt gépek. June 21, 2025 at 10:17 AM, Karina Lyzanets : Az A oldalon June 21, 2025 at 10:22 AM, Vörös Geri : Katód slitt 4 AGV 7 es megált. June 21, 2025 at 10:34 AM, duzzaman Md (MCS) : @FA Please check EOCNVA51_P05. LTA0463 Please transfer it manually. Its stuck for a while, kindly check it in priority. Thank you. June 21, 2025 at 10:35 AM, duzzaman Md (MCS) : @adambenczik @gutenkunstabelzoltan @cehmannzsoltcehmann June 21, 2025 at 10:36 AM, adambenczik : Nagyon magasan van ezen a tálcán a matrica. Most vissza küldtem a raktárba, de a következő ilyen problémánál megcsináljuk June 21, 2025 at 10:49 AM, Atif/Ivancsa FA : Hello Cathode Warehouse under STKC31, AGV02 stops only blinks red light continuously no error, try to move manually but manual not working Need help!! Thank you June 21, 2025 at 10:57 AM, duzzaman Md (MCS) : @FA Please check E0STKC34_P01 Its OOS thank you June 21, 2025 at 10:58 AM, Mr.Miti (미티) FA : they are working on it June 21, 2025 at 11:22 AM, Vlad Danilevskyi : Hello. Anode press 8 agv RW error Thanks June 21, 2025 at 11:24 AM, duzzaman Md (MCS) : @FA PLEASE CHECK E0CNVA51_06_054 Data missmatch error. Thank you June 21, 2025 at 11:29 AM, adambenczik : Kész June 21, 2025 at 12:57 PM, Margaret : Come pls. problem with the transfer slitt 3 anod June 21, 2025 at 1:00 PM, Vörös Geri : Katód press 7-8 ra nem jön az anyag.megnéznétek?köszi June 21, 2025 at 1:01 PM, Mr.Miti (미티) FA : Coming June 21, 2025 at 1:02 PM, 지찬우 : anode slitt 5 conveyor stop check please June 21, 2025 at 1:05 PM, duzzaman Md (MCS) : @FA PLEASE CHECK E0CNVC51_08_19/20 INV-01 RUN TIME OVER ERROR Thank you! June 21, 2025 at 1:11 PM, Mr.Miti (미티) FA : Jönnek csak lassan June 21, 2025 at 1:15 PM, Karina Lyzanets : Cathode conveyor megállt June 21, 2025 at 1:15 PM, Karina Lyzanets : Kérlek nézzetek June 21, 2025 at 1:15 PM, Karina Lyzanets : Meg June 21, 2025 at 1:15 PM, Mr.Miti (미티) FA : Solved June 21, 2025 at 1:16 PM, Karina Lyzanets : Köszi June 21, 2025 at 1:16 PM, Mr.Miti (미티) FA : Checking June 21, 2025 at 1:18 PM, 박태영 : @김건희 릴창고 full로 인해서 노칭 투입지연됩니다. 공트레이와 릴 재고 제조에서 관리 해주시지 않으면 자동화에서 투입지연 보장해드릴수가 없습니다 June 21, 2025 at 1:18 PM, Mr.Miti (미티) FA : Solved June 21, 2025 at 1:26 PM, Vörös Geri : Katód press 8 a 14 AGV kiált hibára June 21, 2025 at 2:09 PM, 지찬우 : Anode slitt 3 1ST, 2ND tray ID reading is not working. Please check June 21, 2025 at 2:23 PM, Mr.Miti (미티) FA : @Kurgya Attila szeretnetek használni a 4-és ca coatert? June 21, 2025 at 3:17 PM, duzzaman Md (MCS) : @FA Pl3ase check E0STKA34_P01 AGV RETRY COUNT EXCEEDED thank you June 21, 2025 at 3:38 PM, Sárvári Márk : @Mr.Miti (미티) FA kérnénk segítséget a Katód 1hez✌️ June 21, 2025 at 3:39 PM, Sárvári Márk : Már kész.😁 June 21, 2025 at 3:56 PM, Mr.Miti (미티) FA : Szívesen 🤣 June 21, 2025 at 4:01 PM, 지찬우 : Please let me know why the Cathode Press 7,8 materials are arriving late June 21, 2025 at 4:03 PM, 지찬우 : Cathode press 8 UW agv error check please June 21, 2025 at 4:07 PM, duzzaman Md (MCS) : PRC 01: It got delayed because STKC34_P01 was oos.now , the agv has acquired it. Prc 080: there is active job but the E1PRC080_P01 is OOS. PRC050_P01/ PRC060_P01: Ports are OOS PRC070: Has active job from STKC34, hot delayed for previous job. PRC030/ PRC040: NO LR June 21, 2025 at 4:46 PM, gutenkunstabelzoltan : Kesz June 21, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.21 "B" műszak, 9+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Harasztia Zoltán, Gerbovits Kevin, Denkó János --------------- S June 21, 2025 at 6:13 PM, Nagy Dávid 4 : Anod slitt 1-2-3 konvejor megált help help köszönöm szépen June 21, 2025 at 6:16 PM, Rácz Dániel / FA : Jövök June 21, 2025 at 6:18 PM, Böröcz Tamás : Solved June 21, 2025 at 6:18 PM, Rácz Dániel / FA : @duzzaman Md (MCS) Please redirect the full reels to the anode 51 warehouse. Thank you June 21, 2025 at 6:19 PM, VK (mcs) : Working on it June 21, 2025 at 6:19 PM, Rácz Dániel / FA : Thank you Mr VK 🤗 June 21, 2025 at 6:20 PM, Rácz Dániel / FA : Full reel tray destination: 6073 June 21, 2025 at 6:23 PM, Szarka Adrián : @Rácz Dániel / FA csinálj bármit hogy elinduljon a konvejor pálya mert így nem tudunk termelni, és Assy meg fog állni miattunk aminek nem nagyi fognak örülni. Egész nap ez volt a gond anod oldalon June 21, 2025 at 6:23 PM, Szarka Adrián : Valaki oldja meg hogy ez ne fordulni elő minden nap. Köszönöm szépen June 21, 2025 at 6:23 PM, Szarka Adrián : @VK (mcs) June 21, 2025 at 6:24 PM, Szarka Adrián : Áll az összes Slitt gépünk mert fullon van a konvejor pálya mert nem viszi el a lift June 21, 2025 at 6:40 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B @FA Please check CA slit CV 6009 LTA0832 June 21, 2025 at 6:53 PM, Szücs Géza FT-B : LTA and slitt CA CV? this is problem. 😱 June 21, 2025 at 7:08 PM, Rácz Dániel / FA : Sorry Mr anode June 21, 2025 at 7:08 PM, 방혁 PM(Bang.Hyuk) FA : 😂 June 21, 2025 at 7:16 PM, Szücs Géza FT-B : It's not worth making fun of the smaller one. (I'm the smaller one) 🥺 June 21, 2025 at 7:17 PM, Csanálosi Gábor FA : I disagree. ;) June 21, 2025 at 7:17 PM, Rácz Dániel / FA : Sorry Mr 😢 June 21, 2025 at 7:18 PM, Szarka Adrián : @Rácz Dániel / FA anod Sl asztalnál ki állt az agv hibára. Semmi nincs a közelében. Minden egyes agv ki áll hibára minden napos probléma ez is. June 21, 2025 at 7:18 PM, Szarka Adrián : @Szücs Géza FT-B tudsz erre küldeni valami mestert ? June 21, 2025 at 7:18 PM, Rácz Dániel / FA : Coming Sir ! 🫡 June 21, 2025 at 7:19 PM, Szarka Adrián : Aki végre meg nézi laptoppal hogy mi a baj itt vagy újra programozta, vagy tesz fel egy uj jelölés hogy levegő se legyen a közelben hogy ne álljon meg June 21, 2025 at 7:21 PM, Szarka Adrián : Na ki is derült a gyári levegő cső van útban neki. Tegyük odébb a Press gépet és a gyári fém levegő csövet ? 🤣🤣🤣🤣 June 21, 2025 at 7:21 PM, Szücs Géza FT-B : nem, mert akinek van: - eszköze hozzá - felhatalmazása - nagy fizetése az nem dolgozik hétvégén 😱🤣🤪 de jelzem csopiba, csak tolmácsunk sincs se ma se holnap. June 21, 2025 at 7:22 PM, Szarka Adrián : Köszönöm szépen ☺️☺️👍👍👍 June 21, 2025 at 7:22 PM, Szücs Géza FT-B : meg tudjuk nézni, de nem engedélyezték még nekünk 🤣 June 21, 2025 at 7:22 PM, Szücs Géza FT-B : ez melyik node pont? June 21, 2025 at 7:22 PM, Szarka Adrián : Press 8 uw oldal de Dani mindjárt nézi June 21, 2025 at 7:23 PM, Szarka Adrián : 3282 talán June 21, 2025 at 7:23 PM, Szarka Adrián : Ott jön le a mennyezetrol levegő cső meg kábelek és az nem tetszik neki June 21, 2025 at 7:24 PM, Rácz Dániel / FA : Igen az June 21, 2025 at 7:27 PM, Rácz Dániel / FA : EL GF AN AGV #1 kiállítva a 3282 és a 3281 es node pont közé. Termelés kérésére lekapcsolva. Feladat törölve, AGV törlése a térképről. June 21, 2025 at 7:27 PM, Rácz Dániel / FA : Hiba: Rear TIM detect June 21, 2025 at 7:28 PM, Rácz Dániel / FA : Fotó nem készült az esetről June 21, 2025 at 7:29 PM, Szücs Géza FT-B : csak ez? June 21, 2025 at 7:30 PM, Rácz Dániel / FA : Igen csak ezt néztem, de többször is előfordult már ezen a node ponton ezzel az AGV-vel. Elegendő a “Muting”-ot használni. June 21, 2025 at 7:31 PM, Rácz Dániel / FA : Szerintem a termelés nem szeretné, hogy a többi jól működő AGV-re ez hátráltató hatással legyen. June 21, 2025 at 7:32 PM, Rácz Dániel / FA : Az E0CNVA51 es conveyornál újra leterhelt az E0STKA52 es daru. Ez miatt hamarosan a teli reeleket elszállító conveyor meg fog állni. June 21, 2025 at 7:34 PM, Rácz Dániel / FA : Átkellene irányítani az E0STKA51 es raktárba ideiglenesen a teli reel tálcákat. June 21, 2025 at 7:34 PM, Szücs Géza FT-B : @VK June 21, 2025 at 7:34 PM, Szücs Géza FT-B : please June 21, 2025 at 7:34 PM, Rácz Dániel / FA : @VK (mcs) please help me 🙏 June 21, 2025 at 7:35 PM, Szücs Géza FT-B : CA CNV gatya June 21, 2025 at 7:35 PM, Szücs Géza FT-B : megszakérted pmíz? @Rácz Dániel / FA June 21, 2025 at 7:35 PM, Rácz Dániel / FA : Nézem June 21, 2025 at 7:36 PM, Rácz Dániel / FA : CA Slitt #4 machine problem June 21, 2025 at 7:39 PM, Rácz Dániel / FA : @Csicskovics Balázs gyere kérlek a Ca slitt 4 re köszi June 21, 2025 at 7:40 PM, Csicskovics Balázs : Szüneten vagyok. June 21, 2025 at 7:40 PM, Nagy Dávid 4 : Megyek June 21, 2025 at 7:41 PM, Rácz Dániel / FA : Már nem kell June 21, 2025 at 7:41 PM, Rácz Dániel / FA : Csak a pushert kellett ready be tennni June 21, 2025 at 7:46 PM, Szücs Géza FT-B : AN CNV-n elakadás van. @Pálosi Róbert @Czeilinger Krisztián légyszives nézzétek meg June 21, 2025 at 7:46 PM, Czeilinger Krisztián : Csináljuk. June 21, 2025 at 7:55 PM, Czeilinger Krisztián : Kész. June 21, 2025 at 7:56 PM, Nagy Dávid 4 : Anode press 2 don’t have material 15 min help help köszönöm szépen June 21, 2025 at 7:57 PM, Nagy Dávid 4 : Anode press 7 nincs 20 perce AGV help help köszönöm szépen June 21, 2025 at 7:59 PM, Czeilinger Krisztián : Nézem. June 21, 2025 at 8:01 PM, Czeilinger Krisztián : Az order nem mutatja viszont látom a kérelmet. June 21, 2025 at 8:03 PM, Czeilinger Krisztián : A 25 AGV fog anyagot vinni. June 21, 2025 at 8:28 PM, Csicskovics Balázs : Sziasztok Cathode oldalon se a pressekre se a slittekre nem érkezik AGV. Légyszíves nézzétek meg köszönöm June 21, 2025 at 8:30 PM, Czeilinger Krisztián : Hello. Cathode press 1 Az order szerint. June 21, 2025 at 8:31 PM, Szarka Adrián : Anod konvejor pálya le állt June 21, 2025 at 8:31 PM, Szarka Adrián : Slitt 6 gépnél error üzenet van June 21, 2025 at 8:32 PM, Szarka Adrián : Gyertek legyszives. Köszi June 21, 2025 at 8:32 PM, Czeilinger Krisztián : Megyek June 21, 2025 at 8:33 PM, Szarka Adrián : @Rácz Dániel / FA majd te is gyere kérlek mert megint fullon van a szalag. Köszönöm June 21, 2025 at 8:42 PM, Rácz Dániel / FA : E0STKA51 be átkell irányítani a teli reel tálcákat, 🥹 June 21, 2025 at 8:43 PM, Czeilinger Krisztián : Rendben. June 21, 2025 at 9:12 PM, Szarka Adrián : Anod oldalon nincs reel talca June 21, 2025 at 9:17 PM, Rácz Dániel / FA : Teli reel tálcás conveyor megint megtelt. Átirányítottam ismét az E0STKA51-be. June 21, 2025 at 9:19 PM, Aloshyn Yevhen : Anod press 1 and press 2 don’t have material 20 min June 21, 2025 at 9:27 PM, VK (mcs) : No material available. June 21, 2025 at 9:29 PM, Kaniz / Ivancsa FA : In anode line 1,Their is a problem with agv. Please anyone come to solve it. June 21, 2025 at 9:35 PM, Kaniz / Ivancsa FA : Please anyone come fast June 21, 2025 at 9:38 PM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián @Rácz Dániel / FA Coater AN1-nél megállt a 20as AGV az STKA31nél pedig a 18as AGV állt meg légyszives nézzétek meg ezeket, elöször a 20ast kégyszives June 21, 2025 at 9:43 PM, Nagy Dávid 4 : Anod press 7 no AGV 19 minutes Help help köszönöm szépen June 21, 2025 at 9:46 PM, Czeilinger Krisztián : Indiai lány már csinálja. June 21, 2025 at 9:46 PM, Rácz Dániel / FA : Sloweed June 21, 2025 at 9:54 PM, Szücs Géza FT-B : E0CNVA51 ismét megyeget June 21, 2025 at 10:45 PM, 장정훈 : @FA Anod roll stk01 PO1 port has 3 rolls including AGV.PIO T01 error please check! June 21, 2025 at 10:47 PM, 장정훈 : Agv08 has changed its destination. June 21, 2025 at 10:47 PM, Nagy Dávid 4 : Cathode Slitt 4 robot problem help help köszönöm szépen June 21, 2025 at 10:52 PM, Szücs Géza FT-B : @Pálosi Róbert vagy @Rácz Dániel / FA légyszives June 21, 2025 at 10:57 PM, Czeilinger Krisztián : Itt vagyok. June 21, 2025 at 10:58 PM, Czeilinger Krisztián : @Pálosi Róbert cathode slitt 4-hez tudnál jönni segíteni? June 21, 2025 at 11:00 PM, Csicskovics Balázs : Cathode press 2 U/W robot probléma. Gyertek légyszives June 21, 2025 at 11:00 PM, Csicskovics Balázs : Köszönöm June 21, 2025 at 11:03 PM, Szücs Géza FT-B : ugyan az a levegős airchuck-os hiba mint pár műszakja az AN Press7nél June 21, 2025 at 11:11 PM, Nagy Dávid 4 : Anod roll raktár agv kiált hibára help help köszönöm szépen June 21, 2025 at 11:15 PM, 장정훈 : @FA Cathode Roll stk 05 T-axis home stand I can not move the origin! Please check! June 21, 2025 at 11:15 PM, Czeilinger Krisztián : Nemsokára megyünk. June 21, 2025 at 11:28 PM, Nagy Dávid 4 : Anod slit 2 nincs tarca help help köszönöm szépen June 21, 2025 at 11:30 PM, Szarka Adrián : Anod Slitt 1 gyere legyszi June 21, 2025 at 11:30 PM, Szarka Adrián : @Szücs Géza FT-B June 21, 2025 at 11:30 PM, Szarka Adrián : @Rácz Dániel / FA June 21, 2025 at 11:30 PM, Szarka Adrián : Reel forgató asztal meg állt June 21, 2025 at 11:34 PM, Szarka Adrián : ? June 21, 2025 at 11:40 PM, Rácz Dániel / FA : Jövök June 21, 2025 at 11:42 PM, Csicskovics Balázs : Cathode slitt 4 re gyertek légyszives. Köszönöm June 21, 2025 at 11:49 PM, Rácz Dániel / FA : Jövök June 21, 2025 at 11:51 PM, Szarka Adrián : Anod Press 2 re 74 perce nem jön az agv June 21, 2025 at 11:56 PM, Rácz Dániel / FA : @VK (mcs) please chekc June 21, 2025 at 11:58 PM, VK (mcs) : Job assigned from anode STK A31 and it’s waiting for AGV June 21, 2025 at 11:59 PM, Szarka Adrián : Akkor az ottani le robbant agv miatt nem jön a roll. Tudsz segíteni ott kérlek @Rácz Dániel / FA nem áll be az agv szerintem a helyére és nem teszi fel a roll June 21, 2025 at 11:59 PM, VK (mcs) : And now auto port is out of service. E0STKA31-P01 June 22, 2025 at 12:10 AM June 22, 2025 at 12:10 AM, Csicskovics Balázs : Cathode press 7 u/w robot hiba. Gyertek légyszives. Köszönöm June 22, 2025 at 12:12 AM, Rácz Dániel / FA : Jövök June 22, 2025 at 1:01 AM, Dana Honak : Cathode slitt 4 r/w robot problema . Convejor stop. June 22, 2025 at 1:03 AM, Rácz Dániel / FA : Megyünk June 22, 2025 at 1:07 AM, Rácz Dániel / FA : Chair 🤗 June 22, 2025 at 1:53 AM, 김지수PM(Gyuri)_FA : @VK (mcs) could you please check the 6033 track of E0CNVA51? June 22, 2025 at 1:53 AM, 김지수PM(Gyuri)_FA : Lta0337 is not moving June 22, 2025 at 1:54 AM, Viktoriia Hleba : Press 4 anode r/w Agv nem tudja elvenni a kész anyagot,beál az agv az után meg kiál és elmegy June 22, 2025 at 1:57 AM, VK (mcs) : Carrier already passed the conveyor port 7 . After that it’s getting order by CCS. As I checked MCS, there was no problem. Its technical issue. June 22, 2025 at 1:59 AM, VK (mcs) : @FA Please check Anode reel conveyor A51(6034) Carrier is stopped. June 22, 2025 at 2:08 AM, Pálosi Róbert : Going June 22, 2025 at 2:09 AM, Pálosi Róbert : Kész June 22, 2025 at 2:09 AM, Csanálosi Gábor FA : Ne menj már jó June 22, 2025 at 3:09 AM, Dana Honak : Cathode slitt 3-4 Convejor stop. June 22, 2025 at 3:09 AM, Rácz Dániel / FA : Úton June 22, 2025 at 3:14 AM, Rácz Dániel / FA : Elindult June 22, 2025 at 3:16 AM, Szarka Adrián : 25 agv le robbant anod Press 2 gep Rw oldalon June 22, 2025 at 3:16 AM, Szarka Adrián : Így fel tartja a többi agv ami hozná a rollt June 22, 2025 at 3:17 AM, Szarka Adrián : Gyertek legyezives köszönöm June 22, 2025 at 3:18 AM, Nagy Dávid 4 : Kész June 22, 2025 at 3:19 AM, Rácz Dániel / FA : Köszi June 22, 2025 at 3:27 AM, Rácz Dániel / FA : @VK (mcs) please check why not moving E0CNVC51 full reel trays ? June 22, 2025 at 3:32 AM, VK (mcs) : There is no problem in MCS, it seems technical issue. June 22, 2025 at 3:37 AM, Nagy Dávid 4 : Anod roll raktarnál a 17 számú agv kiált hibára help help köszönöm szépen June 22, 2025 at 3:37 AM, Nagy Dávid 4 : Done June 22, 2025 at 3:42 AM, Nagy Dávid 4 : Anod slitt 5 konvejor megált help help köszönöm szépen sos köszi June 22, 2025 at 3:51 AM, Nagy Dávid 4 : Anode press 2 AGV does not pick up material from R/W Help help köszönöm szépen June 22, 2025 at 3:52 AM, Rácz Dániel / FA : Megyünk ahova tudunk sorba June 22, 2025 at 3:55 AM, Szücs Géza FT-B : CNVC51 kész, megybek elfele és érkeznek a tálciikák June 22, 2025 at 3:56 AM, Pálosi Róbert : Viszi June 22, 2025 at 3:58 AM, Rácz Dániel / FA : Köszi June 22, 2025 at 3:58 AM, Rácz Dániel / FA : Kész June 22, 2025 at 4:19 AM, Szarka Adrián : 25 számú agv vajon miért parkolt le ide az anod Sl asztal mellé úgy hogy rajta van egy roll ? Hova kellett volna neki menni ? June 22, 2025 at 4:21 AM, Rácz Dániel / FA : @VK (mcs) please chekc . Thynk aou June 22, 2025 at 4:24 AM, VK (mcs) : Destination is Press 8th June 22, 2025 at 4:24 AM, Rácz Dániel / FA : Thayk nou Sir ! 👊 June 22, 2025 at 4:25 AM, Szarka Adrián : És miért nem áll be ? Pedig a robot le tudná szedni a bufferre June 22, 2025 at 4:25 AM, Szarka Adrián : Na most elindult. Lehet pihent egyet 🤣🤣🤣🤣 June 22, 2025 at 5:37 AM, Viktoriia Hleba : Anode Press 4 r/w robot stop. Please check June 22, 2025 at 5:43 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8020) Full tray is not moving. Thx June 22, 2025 at 6:25 AM, adambenczik : Solved June 22, 2025 at 6:37 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 22, 2025 at 7:12 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA52_P01_OP01, its OOS Thank you! June 22, 2025 at 7:16 AM, adambenczik : Solved June 22, 2025 at 10:37 AM, Karina Lyzanets : Hello! Who could see why the AGV robot does not bring material to Slitter Cathode 1, because on Slitter Cathode 2 it brings material if there is material in stock, thank you very much June 22, 2025 at 10:39 AM, Mr.Miti (미티) FA : Checking June 22, 2025 at 10:42 AM, Mr.Miti (미티) FA : @duzzaman Md (MCS) Please check avaible material for ca slitt 1-2. I cant see any avaible material az RTD. Thank you very much June 22, 2025 at 10:48 AM, duzzaman Md (MCS) : No search lot June 22, 2025 at 10:49 AM, Mr.Miti (미티) FA : Thank you! June 22, 2025 at 10:49 AM, Mr.Miti (미티) FA : No avaible material . June 22, 2025 at 11:04 AM, Karina Lyzanets : Slitt Cathode 1 no ID tray Kérlek nézzetek meg, köszi June 22, 2025 at 11:08 AM, Mr.Miti (미티) FA : Rendben June 22, 2025 at 11:09 AM, adambenczik : Rajta vagyok June 22, 2025 at 11:13 AM, adambenczik : Kész June 22, 2025 at 11:20 AM, Karina Lyzanets : @adambenczik gyere légyszíves Slitt Cathode 1 re, nem jönn a tálca June 22, 2025 at 11:20 AM, Karina Lyzanets : Köszönöm June 22, 2025 at 11:24 AM, adambenczik : Kész is June 22, 2025 at 11:40 AM, Atif/Ivancsa FA : Hello In the Cathode Warehouse STKC33 have AGV align step time over, I tried but the same error again and again. Need help!! Thank you June 22, 2025 at 11:46 AM, adambenczik : I deleted the order, and sent AGV#9 to finish the job June 22, 2025 at 11:47 AM, Atif/Ivancsa FA : Thank you June 22, 2025 at 12:50 PM, Kurgya Attila : Anod roll raktárba szeretnénk kérni segítséget, ajtónyitási hiba miatt. Köszönöm June 22, 2025 at 12:53 PM, adambenczik : Jövünk June 22, 2025 at 12:56 PM, Mr.Miti (미티) FA : Solved June 22, 2025 at 1:32 PM, KIM SEYEON [김세연]_FA : @서지원 피엠님 @Electrode coater shift leaders If coater line #4 is operated, we need to secure that nothing is blocked on the AGV route. I am in coater line #4 now. and moving tank is in front of the coater RW. Please let FA team know in advance about coater line #4 operation. and keep in mind above things. Thanks. June 22, 2025 at 1:34 PM, Kurgya Attila : Okay June 22, 2025 at 4:06 PM, Szeitz Flórián : Anód slitt konveyor pálya megállás. Légyszives nézzétek meg. Köszönöm June 22, 2025 at 4:07 PM, Mr.Miti (미티) FA : Megy az nincs megállva June 22, 2025 at 4:08 PM, gutenkunstabelzoltan : Jaja csak lassu mint alltalaban June 22, 2025 at 5:15 PM, 지찬우 : Are you troubleshooting the anode reel conveyor issue? June 22, 2025 at 5:16 PM, Mr.Miti (미티) FA : A second please June 22, 2025 at 5:18 PM, Mr.Miti (미티) FA : @duzzaman Md (MCS) Please direct the roll trays to warehouse A51 because warehouse 52 is currently working very slowly and the conveyor is crowded. Thank you very much! June 22, 2025 at 5:26 PM, duzzaman Md (MCS) : Actually, it won't work from MCS. Please try it from CCS. Thank you June 22, 2025 at 5:33 PM, Mr.Miti (미티) FA : I modified all the routes. Now they are being stored at incredible speed. June 22, 2025 at 5:33 PM, Mr.Miti (미티) FA : Thank you June 22, 2025 at 5:43 PM, 지찬우 : Thank you! June 22, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.22 "B" műszak, 7+2+4/12+2 Tech, 1SL Overtime(4): Harasztia Zoltán, Gégény Dávid, Kertész Dániel, Fabriczius Gergely Holiday(3): Pintye Miklós, Gerbovits Kevin, Böröczki Balázs Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Takács Ádám --------------- Assy 1F (2): Gégény Dávid, Fab June 22, 2025 at 6:03 PM, Viktor Vadas : Sziasztok! Coatingon Anod 1, Katod 1 termel ma! Mindketto soron hasznalunk AGV-t! June 22, 2025 at 6:12 PM, Kaniz / Ivancsa FA : Agv no.4 has some issue in the cathode side..please come and check. Thanks June 22, 2025 at 6:13 PM, Szücs Géza FT-B : Coatingon AGV CA#4 lerobbant, @Czeilinger Krisztián légyszives indítsd vissza June 22, 2025 at 6:14 PM, Czeilinger Krisztián : Rendben. June 22, 2025 at 6:31 PM, Nagy Dávid 4 : Anod slit 2 nincs AGV 15p help help köszönöm szépen June 22, 2025 at 6:31 PM, Czeilinger Krisztián : Kész June 22, 2025 at 6:31 PM, Czeilinger Krisztián : Solved. June 22, 2025 at 6:32 PM, Szücs Géza FT-B : Sziasztok. Megkèrnènk a KPA-457 es frszú. Opel tulajdonosàt, álljon el az elektromos autók részère fenntartott parkolóhelyről. June 22, 2025 at 6:32 PM, Shakir (MCS) : No material available June 22, 2025 at 6:32 PM, Szücs Géza FT-B : CA Press4 AGV töltőnél AGV le van szomorkodva, háoháp June 22, 2025 at 6:33 PM, Czeilinger Krisztián : Megyünk. June 22, 2025 at 6:36 PM, Shakir (MCS) : Next LOT available Electrode Slitter 1/2/4/5 Anode:00 Cathode:00 Slitter 3/4 Anode:71 Cathode:05 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8 Anode:08 Cathode:49 Press 3/4 Anode:129 Cathode:37 June 22, 2025 at 6:47 PM, Viktoriia Hleba : Anod slit 1 nincs AGV 15 perc June 22, 2025 at 6:48 PM, Szücs Géza FT-B : @Shakir (MCS) June 22, 2025 at 6:48 PM, Shakir (MCS) : Checking June 22, 2025 at 6:48 PM, Shakir (MCS) : No material available June 22, 2025 at 6:49 PM, Shakir (MCS) : Also I shared available lot here. June 22, 2025 at 7:07 PM, Viktoriia Hleba : 5 slitt anode nincs Agv - 15 perc June 22, 2025 at 7:08 PM, Shakir (MCS) : No material available, Thanks June 22, 2025 at 7:18 PM, Csicskovics Balázs : Sziasztok Cathode slitt 4 robot probléma. Gyertek légyszives. Köszönöm June 22, 2025 at 7:27 PM, Dana Honak : Már nem szükséges megtenni.! June 22, 2025 at 7:27 PM, Pálosi Róbert : Már csináljuk June 22, 2025 at 7:33 PM, 김지수PM(Gyuri)_FA : @fa please check E0CNV51 > LTC0773(track 8076) is not moving June 22, 2025 at 7:35 PM, Shakir (MCS) : @Fa @Czeilinger Krisztián At E0CNVC51_P06, emty reel tray not moving for long time. Blocked other trays. Thank you June 22, 2025 at 7:41 PM, 김지수PM(Gyuri)_FA : Empty reel trays will be released from the C51 until problem on C52 disappears June 22, 2025 at 7:50 PM, Dana Honak : 2 slitt cathode ninc talca ! June 22, 2025 at 7:52 PM, Rácz Dániel / FA : @Shakir (MCS) please cehck. Thank you June 22, 2025 at 7:53 PM, Shakir (MCS) : @Rácz Dániel / FA because of this issue Please check June 22, 2025 at 7:54 PM, Rácz Dániel / FA : Thank you, I going chrcking. June 22, 2025 at 7:58 PM, Nagy Dávid 4 : Anod slitt 5 ki kellen kapcsolni a buffert hogy ne hozzon ki rá több anyagot meg lehet oldani help help köszönöm szépen June 22, 2025 at 8:00 PM, Rácz Dániel / FA : I don't see the problem, please help why not moving the empty trays ? June 22, 2025 at 8:01 PM, Rácz Dániel / FA : Jövök June 22, 2025 at 8:01 PM, Böröcz Tamás : Pill csak supportálom a supportot June 22, 2025 at 8:01 PM, Rácz Dániel / FA : @Szücs Géza FT-B help helo June 22, 2025 at 8:02 PM, Böröcz Tamás : Nagy segítség a magyar családoknak June 22, 2025 at 8:03 PM, Rácz Dániel / FA : Kikapcsoltam az UW transfert June 22, 2025 at 8:04 PM, Böröcz Tamás : @manufacruring @akarkiakiatjon Katód raktáraknál be kell csukni a folyosóra nyíló ajtót mert nem tud elmenni mellette az AGV June 22, 2025 at 8:05 PM, Böröcz Tamás : @fa nincs agv help help please June 22, 2025 at 8:06 PM, Rácz Dániel / FA : @Shakir (MCS) please help me I dont ser the problem. The slitt maxhines not working because no emptty reel trays June 22, 2025 at 8:09 PM, Shakir (MCS) : From MCS side everything good, manual job created at 18:39. June 22, 2025 at 8:10 PM, Rácz Dániel / FA : @Kertész Dániel @Takács Ádám Solved, köszi. June 22, 2025 at 8:10 PM, Rácz Dániel / FA : Thank you Sir ! June 22, 2025 at 8:11 PM, Shakir (MCS) : Now, Empty reel trays on the to slitt. Thank you June 22, 2025 at 8:11 PM, Rácz Dániel / FA : Lassan mennek az üres tálcák June 22, 2025 at 8:22 PM, Böröcz Tamás : Most azért nem a press gépet kell arrébb tenni June 22, 2025 at 8:24 PM, Böröcz Tamás : Bobbinos raklaptól sem fért el az AGV de Rácz Danival nem bírok. Odébb rakta June 22, 2025 at 8:25 PM, Böröcz Tamás : Szereti a Bountyt June 22, 2025 at 8:27 PM, Csanálosi Gábor FA : Bounty hunter June 22, 2025 at 8:34 PM, Rácz Dániel / FA : MYLF June 22, 2025 at 8:36 PM, Viktoriia Hleba : Anod press 7 r/w robot error June 22, 2025 at 8:37 PM, Viktoriia Hleba : nem kell , köszönöm! June 22, 2025 at 9:02 PM, Viktoriia Hleba : 2 slitter anode nagyon lassan a tálca. Please check June 22, 2025 at 9:03 PM, Shakir (MCS) : More empty reel trays on the way way June 22, 2025 at 9:05 PM, Viktor Vadas : Sziasztok! Segitseget szeretnenk kerni Coating Katod 1 2-es rewinderre! Kek ruhas kollega meg probalkozik! Koszonom! June 22, 2025 at 9:07 PM, Pálosi Róbert : Megyek June 22, 2025 at 9:39 PM, Nagy Dávid 4 : Slit anod 2 nincs tarca help help köszönöm szépen June 22, 2025 at 9:40 PM, Shakir (MCS) : STK cranes are too busy, and too many jobs. June 22, 2025 at 9:41 PM, Czeilinger Krisztián : Nézem June 22, 2025 at 9:43 PM, Czeilinger Krisztián : Nincs hiba,a tálcák lassan mennek. June 22, 2025 at 9:53 PM, Czeilinger Krisztián : Kész June 22, 2025 at 10:01 PM, Viktoriia Hleba : Anod slitt conveer stop . Please check June 22, 2025 at 10:01 PM, Czeilinger Krisztián : Check. June 22, 2025 at 10:24 PM, Czeilinger Krisztián : Kész. June 22, 2025 at 10:57 PM, Viktoriia Hleba : 2- 3 slitt anode stop. June 22, 2025 at 11:23 PM, Nagy Dávid 4 : Anod slitt 2 robot probléma help help köszönöm szépen June 22, 2025 at 11:48 PM, Kaniz / Ivancsa FA : Their is a problem with agv.. Please come to the anode line 1 June 22, 2025 at 11:58 PM, Rácz Dániel / FA : Mennek June 23, 2025 at 12:04 AM June 23, 2025 at 12:04 AM, Pálosi Róbert : Which machine? June 23, 2025 at 12:12 AM, Rácz Dániel / FA : EL GF AN CT #04 P03 June 23, 2025 at 12:13 AM, Pálosi Róbert : 😂 June 23, 2025 at 12:35 AM, Viktoriia Hleba : Anod press 7 R/W robot error June 23, 2025 at 12:36 AM, Pálosi Róbert : Going June 23, 2025 at 12:40 AM, Pálosi Róbert : Solved June 23, 2025 at 1:15 AM, Viktor Vadas : Sziasztok! Katod 1 2-es rewindernel megint csak kiallt hibara a transfer miutan beallt az Agv! Segitsegeteket kernenk! Koszonom! June 23, 2025 at 1:19 AM, Viktoriia Hleba : Agv 8 stop. 1 slitt anode please check June 23, 2025 at 1:21 AM, 박정근(Park) : 안녕하세요 금일야간 FA한국인 담당자분 계실까요? June 23, 2025 at 1:26 AM, Nagy Dávid 4 : Anod slitt 1-nél a 8 számú agv kiált hibára help help köszönöm szépen June 23, 2025 at 1:34 AM, Pálosi Róbert : Volt egy kis meló a coatingon June 23, 2025 at 2:42 AM, Rácz Dániel / FA : @fa please check Anode Coater AGV, detect error, thank you June 23, 2025 at 2:52 AM, Rácz Dániel / FA : Megyünk June 23, 2025 at 2:56 AM, Aloshyn Yevhen : Anode press 1 no AGV 25 min June 23, 2025 at 2:58 AM, Shakir (MCS) : This message was deleted. June 23, 2025 at 3:09 AM, Czeilinger Krisztián : The reason for the error was that the servers were stopped, ready. Solved. June 23, 2025 at 3:10 AM, Czeilinger Krisztián : @Shakir (MCS) June 23, 2025 at 3:10 AM, Shakir (MCS) : Thank you June 23, 2025 at 3:48 AM, Aloshyn Yevhen : Anode press 1 no AGV 25 min June 23, 2025 at 3:49 AM, Shakir (MCS) : AGV18 on the way, Thanks June 23, 2025 at 4:20 AM, Csicskovics Balázs : Cathode oldalon megállt a conveyor pálya. Gyertek légyszives Köszönöm June 23, 2025 at 4:26 AM, Rácz Dániel / FA : Jövünk June 23, 2025 at 4:33 AM, Szücs Géza FT-B : Press/Slitt AGV AN#1, nem produkálja a hibát, már sokadik alkalommal. Visszahelyezve a termelésbe. Lehetséges hogy a raklap volt neki útba June 23, 2025 at 4:35 AM, Aloshyn Yevhen : Anode press 1 no AGV 25 min June 23, 2025 at 4:36 AM, Shakir (MCS) : No material available June 23, 2025 at 4:39 AM, Nagy Dávid 4 : A raklap a kijelölt helyen van mint eddig úgy hogy ott más probléma álhat fent. June 23, 2025 at 4:44 AM, Shakir (MCS) : AGV18 on the way to press 1 AN June 23, 2025 at 4:52 AM, Shakir (MCS) : @FA PLEASE CHECK E0CNVC51_08_049/50 INV-01 RUN TIME OVER ERROR Thank you! June 23, 2025 at 4:54 AM, Aloshyn Yevhen : Anode press 2 no AGV 20 min June 23, 2025 at 4:56 AM, Shakir (MCS) : AGV11 on the way to Press2 AN, Thanks June 23, 2025 at 5:07 AM, Dana Honak : A talca nem áll a oldalra B Cathode slitt 4 June 23, 2025 at 5:09 AM, Rácz Dániel / FA : Megyünk June 23, 2025 at 5:10 AM, Szarka Adrián : A jelölésen belül van a raklap. Tegnap meg a levegő cső volt neki útban ami gyárilag ott van. És akkor a raklap még hátrébb is volt. Úgy hogy nem a raklap van neki útban. June 23, 2025 at 5:12 AM, Rácz Dániel / FA : Kész June 23, 2025 at 5:31 AM, Csicskovics Balázs : Cathode oldalon ismét megállt a conveyor pálya. Gyertek légyszives. Köszönöm June 23, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid, Magyar Balázs June 23, 2025 at 6:07 AM, Nauman/Ivancsa FA : This message was deleted. June 23, 2025 at 6:08 AM, Kozma István : Sziasztok, gyertek légyszi anód 1 1rw June 23, 2025 at 6:09 AM, Oláh András : Jövünk June 23, 2025 at 6:10 AM, 오승주 : There is a problem with AGV on the 1st line of the coating cathode. Please check it. June 23, 2025 at 6:12 AM, Oláh András : Comin June 23, 2025 at 6:33 AM, 조혜근 : @FA The RW 2ND side tray of cathode slitter unit 4 does not come to the waiting place. Please check it June 23, 2025 at 6:57 AM, Mohammad Amir : Good morning Everyone, Next LOT available Electrode Slitter 1/2/4/5 Anode:10 Cathode:03 Slitter 3/4 Anode:54 Cathode:00 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8 Anode:00 Cathode:42 Press 3/4 Anode:129 Cathode:31 Thank you very much! June 23, 2025 at 7:05 AM, 조혜근 : Rolls are not coming to the UW of cathode slitter unit 3. Please check it June 23, 2025 at 7:06 AM, Mohammad Amir : Good morning Sir, Currently there is no material available,as soon as material will be available it will reach there cause we have an active LR. Thank you very much! June 23, 2025 at 7:07 AM, 조혜근 : RBC1599 is normally in the warehouse. Please check it out June 23, 2025 at 7:07 AM, Mohammad Amir : Sure Sir, Checking! June 23, 2025 at 7:13 AM, Mohammad Amir : Sir, For RBC1599 ,we are not receiving data as Slitter lot for this Roll from MES side to RTD side. So that's why it is not available for slitting process for machine -3. Thank you very much! June 23, 2025 at 7:14 AM, 조혜근 : Thank you for checking June 23, 2025 at 7:14 AM, Mohammad Amir : You are welcome! June 23, 2025 at 7:28 AM, Somoskövy Martin : Sziasztok. Anode Slitt 2-nél megállt egy reel a conveyoron. Megnéznétek? Köszönöm. June 23, 2025 at 7:36 AM, Oláh András : Kis türelem és megyünk June 23, 2025 at 7:43 AM, Oláh András : Katod coating 1 r/w1 újra működik. Letesztelve, 1 auto leszedés végig ellenőrizve June 23, 2025 at 7:47 AM, Mohammad Amir : @FA Please check and take action on E0CNA51_06_124/151 there is INV-01 Runtime Over error and it exists since 7:26. Because of this CNV between Slitter 3-2 has stopped. Thank you very much! June 23, 2025 at 9:18 AM, ~Lidiia~리디 ~ : Hello! An error occurred with tray movement on Anode slitt 1 on the conveyor. Please check this. Thank you! June 23, 2025 at 9:18 AM, 조혜근 : @Mohammad Amir Can't RBC1599 still go to Slitter? Please check it June 23, 2025 at 9:19 AM, Mohammad Amir : Sure Sir, I am checking,you are still referring to CA Slitter -3? Thank you very much! June 23, 2025 at 9:19 AM, 조혜근 : The semi-finished product inspection was not entered. I'd like to ask if it can be transmitted by solving the problem now June 23, 2025 at 9:19 AM, 조혜근 : yes yes June 23, 2025 at 9:22 AM, Somoskövy Martin : Anode Slitt 1-en megállt a conveyor és tálcaszám vesztés is van. Ránéznètek? Köszönöm. June 23, 2025 at 9:23 AM, Mohammad Amir : Sir @조혜근 , Now issue has been resolved ✅. RBC1599 is going to Slitter Cathode-3 on AGV#1. Thank you very much! June 23, 2025 at 9:23 AM, 조혜근 : Thank you for the confirmation June 23, 2025 at 9:23 AM, Mohammad Amir : You are welcome! June 23, 2025 at 9:38 AM, Mohammad Amir : @FA Please check E0CNVA51_06_016/17 there is INV-01 Run time Over error and it is blocking materials recovery. Thank you very much! June 23, 2025 at 9:51 AM, ~Lidiia~리디 ~ : @FA the anode side, the conveyor line is completely full, due to an error, please check. Thank you! June 23, 2025 at 9:53 AM, Mohammad Amir : @Oláh András Please check and take action this issue exists since 9:37 and now whole CNVA 51 has filled with recovery materials. Thank you very much! June 23, 2025 at 9:56 AM, Oláh András : Sorry i was at powder load. Coming June 23, 2025 at 9:57 AM, Mohammad Amir : Thank you very much! June 23, 2025 at 10:07 AM, Mohammad Amir : Dear @All Next LOT available Electrode Slitter 1/2/4/5:- Anode:10 Cathode:00 Slitter 3:- Anode:51 Cathode:00 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:00 Cathode:49 Press 3/4:- Anode:129 Cathode:26 Thank you very much! June 23, 2025 at 10:32 AM, Mohammad Amir : @FA Please check E0STKA31_C01 there is SCP Main Power CP Trip error. Thank you very much! June 23, 2025 at 10:32 AM, Oláh András : Checking June 23, 2025 at 10:53 AM, Mohammad Amir : @FA Please check E0STKC31_C01 there is SCP Main Power CP Trip error. Thank you very much! June 23, 2025 at 10:54 AM, Mohammad Amir : @FA One job is pending because E1CTA020_P01 is OOS , please let me know is there any production? Thank you very much! June 23, 2025 at 11:09 AM, Oláh András : @Mohammad Amir can you check E0STKA31_P01 and B01? Is there any material info? June 23, 2025 at 11:11 AM, Oláh András : Ports are empty but we cant start transfer. Pio timeover alarm June 23, 2025 at 11:11 AM, Mohammad Amir : Sure, Checking! June 23, 2025 at 11:13 AM, Mohammad Amir : Hello, I checked everything is good from MCS and RTD side. ✅. Please check Port STKA31(3016) Key S/W off error it is blocking transfer. Thank you very much! June 23, 2025 at 11:15 AM, Oláh András : Solved thank you 👍🏻 June 23, 2025 at 11:16 AM, Mohammad Amir : You are welcome! June 23, 2025 at 12:03 PM, Kozma István : Gyertek légyszi anod1 re, köszi June 23, 2025 at 12:05 PM, Dániel Hufnágel : Egy pillanat June 23, 2025 at 12:06 PM, ~Lidiia~리디 ~ : @ FA A transfer error occurred on slitt 1 cathode while transferring the coil to the tray, please check this. Thank you! June 23, 2025 at 12:07 PM, Dániel Hufnágel : Just a moment June 23, 2025 at 12:09 PM, Kozma István : Köszi közben megoldódott June 23, 2025 at 12:25 PM, 오승주 : Coating cathode 1 line 2 rewinder AGV problem occurred. Please check it June 23, 2025 at 12:33 PM, Mohammad Amir : @FA Please check E0STKC31_C01 there is SCP Main Power CP Trip error. Thank you very much! June 23, 2025 at 12:42 PM, Dániel Hufnágel : This message was deleted. June 23, 2025 at 12:42 PM, Dániel Hufnágel : Done June 23, 2025 at 12:56 PM, Mohammad Amir : @FA Please check this issue. Thank you very much! June 23, 2025 at 12:57 PM, Oláh András : We will June 23, 2025 at 12:57 PM, 오승주 : There is a problem with Rewinder AGV No. 1 line 1 of the coating cathode. Please check it June 23, 2025 at 12:59 PM, 오승주 : 양극 1라인 2nd 리와인더 금일 아침에 문제 됐었던 현상과 동일한 현상 발생 했습니다. 확인 부탁드립니다. June 23, 2025 at 1:04 PM, Dániel Hufnágel : Technicans are going there June 23, 2025 at 3:12 PM, Mohammad Amir : @FA Please check E0CNVA51_06_011/12 there is INV-01 Run time Over error and it is blocking materials recovery. Thank you very much! June 23, 2025 at 3:28 PM, ~Lidiia~리디 ~ : @FA There was a transfer error on cathode slitt 1, so it is not possible to send the coil to the tray. Please check this. June 23, 2025 at 3:31 PM, Oláh András : Coming June 23, 2025 at 6:32 PM, Shakir (MCS) : Good evening @All Next LOT available Electrode Slitter 1/2/4/5:- Anode:21 Cathode:02 Slitter 3:- Anode:51 Cathode:02 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:04 Cathode:54 Press 3/4:- Anode:118 Cathode:17 Thank you June 23, 2025 at 7:21 PM, Bks.Gabor : Sziasztok! Anod Press 1-hez tudtok jönni.. koszii June 23, 2025 at 7:22 PM, Viczai Tamás : Megyek June 23, 2025 at 8:38 PM, Zsmenyák György : Sziasztok katód press 3 R/Wideren a leszedő robot megakadt June 23, 2025 at 8:38 PM, Viczai Tamás : Megyek June 23, 2025 at 9:30 PM, Czél Tamás : Sziasztok Segítséget kérnék Anód Press 3-ra. A robot felejtett egy Jumbót. Köszönöm June 23, 2025 at 9:30 PM, Viczai Tamás : Megyek June 24, 2025 at 1:17 AM June 24, 2025 at 1:17 AM, Kaniz / Ivancsa FA : Agv no 4 has some issue in anode line 4..please come and check. Thanks June 24, 2025 at 4:56 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_152 there is INV-01 Run Time over error, Thank you June 24, 2025 at 4:58 AM, Viczai Tamás : Done June 24, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+1 Overtime (1): Cehman Zsolt Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Cehman Zsolt Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Martina Dávid, Magyar Balázs June 24, 2025 at 6:25 AM, Mohammad Amir : Good morning Everyone, Next LOT available Electrode Slitter 1/2/4/5 Anode:13 Cathode:06 Slitter 3 Anode:52 Cathode:06 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8 Anode:04 Cathode:53 Press 3/4 Anode:103 Cathode:02 Thank you very much! June 24, 2025 at 6:32 AM, Mohammad Amir : @FA @Oláh András Good morning, Please check E0STKC34_C01 there is SCP Main Power CP trip. Thank you very much! June 24, 2025 at 6:32 AM, Oláh András : Good morning! Checking June 24, 2025 at 6:52 AM, Viktoriia Hleba : Hello, 4 slitter cathode Agv 16 - stop u/w . Please check June 24, 2025 at 7:01 AM, ~Lidiia~리디 ~ : Hello, An error occurred on the slitt unit 5 anode with U/W transfer (S\W Push Abnormal) because of which it is not possible to call the AGV. Please check this. Thank you! June 24, 2025 at 7:01 AM, Oláh András : Coming June 24, 2025 at 7:53 AM, Mohammad Amir : @FA Could you please check this issue,it still Exists. Thank you very much! June 24, 2025 at 7:53 AM, Oláh András : Sure June 24, 2025 at 7:55 AM, Oláh András : I see its the coating machines unwider. They use it manually so if a job is pending you can cancel it. June 24, 2025 at 7:56 AM, Mohammad Amir : The Foil was still in the STK so cancel the job ✅. Thank you very much! June 24, 2025 at 9:02 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 안녕하세요 음극 코터 4라인 가동계획 공유 주시면 자동화에서도 사전 준비하여 생산 대응이 원활이 될수 있게 하겠습니다. June 24, 2025 at 9:15 AM, 서지원 : 안녕하세요 펨님! 공유가 늦었습니다. 전극 재고 확인 시 양극2라인 생산이 좀 더 급하여 금일 야간 (11시)부터는 양극 1, 양극 2, 음극 1 라인 가동 예정입니다. 음극 4라인은 목요일 정도로 예상됩니다. June 24, 2025 at 9:19 AM, Mohammad Amir : @FA @Oláh András Please check E0CNVC51(6042) it is OOS(Manually) and empty trays delivery has completely stopped. Please make 6042 auto mode on priority as there is already a shortage of empty trays. Thank you very much! June 24, 2025 at 9:19 AM, Oláh András : Ok checking June 24, 2025 at 9:20 AM, Mohammad Amir : E0CNVA51**** June 24, 2025 at 9:21 AM, Mohammad Amir : @Oláh András Anode side CNV. Thank you very much! June 24, 2025 at 9:23 AM, 배병민 (Bae Byoungmin) : 넵 공유 감사합니다. June 24, 2025 at 9:25 AM, ~Lidiia~리디 ~ : @FA On the 4 slitter cathode Agv 16 - stop u/w. Please check this. Thank you! June 24, 2025 at 9:26 AM, Oláh András : Comin June 24, 2025 at 9:38 AM, ~Lidiia~리디 ~ : There is no reel tray on the anode side, and the tray started moving slowly due to the robot stopping on Stocker #1 E0STKA51. Please check this. Thank you! June 24, 2025 at 9:39 AM, Oláh András : @Mohammad Amir check please June 24, 2025 at 9:41 AM, Mohammad Amir : Hello @Oláh András Due to CNVA51(6042) was in Manual mode and it was blocking the reels trays delivery as I mentioned earlier this issue. However now this issue has been resolved and reels trays in its way. ✅ I am monitoring. Thank you very much! June 24, 2025 at 9:41 AM, Oláh András : Thank you👍🏻 June 24, 2025 at 9:42 AM, Mohammad Amir : @~Lidiia~리디 ~ Because of this issue you witnessed delay now issue has been resolved ✅. Empty anode trays on the way . Thank you very much! June 24, 2025 at 9:42 AM, Mohammad Amir : You are welcome! June 24, 2025 at 9:51 AM, Mohammad Amir : @FA @Oláh András Please check E0CNVC51_08_031 there is INV-03 Error and it has blocked empty trays delivery. Please check the issue on priority. Thank you very much! June 24, 2025 at 9:52 AM, Oláh András : Checking June 24, 2025 at 9:57 AM, 박태영 : @김건희 음극 릴창고에 공트레이가 많이 없습니다. 순환이 안되고 있어서 대책이 필요합니다. June 24, 2025 at 10:23 AM, 주범진 : 안녕하세요 포일스토커 에러코드128, 에러메세지 포크1 공출고에러(렉) 발생했는데 조치 부탁 드립니다 June 24, 2025 at 10:34 AM, 박태영 : 김건희 피엠님 혹시 대차에 릴을 채우실순 있나요? June 24, 2025 at 10:46 AM, Erik Gerzsenyi : Katod 1-es roll raktarhoz kernek helpet June 24, 2025 at 10:46 AM, Erik Gerzsenyi : Koszcsi June 24, 2025 at 10:46 AM, Oláh András : Yes sir 🫡 June 24, 2025 at 10:53 AM, Kozma István : Sziasztok, Coating fólia raktárba kérnénk segítséget. Köszi June 24, 2025 at 10:54 AM, Oláh András : Megyünk June 24, 2025 at 11:00 AM, Viktoriia Hleba : 4 slitter cathode nincs Agv - 15 perc Please check June 24, 2025 at 11:03 AM, Mohammad Amir : AGV#9 on the way ✅. Thank you very much! June 24, 2025 at 11:10 AM, KIM SEYEON [김세연]_FA : @주범진 피엠님 저희 쉬프트리더가 갈겁니다. @Dániel Hufnágel please help @주범진 June 24, 2025 at 11:11 AM, KIM SEYEON [김세연]_FA : @송태용(Song tae yong) June 24, 2025 at 11:14 AM, 주범진 : 감사합니다 피엠님 June 24, 2025 at 11:34 AM, 장영환(Younghwan Chang) : PM님 지금 어차피 폐기해야하는 릴들을 추린 다음 창고밖으로 꺼내서 현장에 보관하려고 합니다 공트레이 확보는 어느 정도 될 것 같습니다 June 24, 2025 at 11:38 AM, Viktoriia Hleba : 4 slitter cathode nincs Agv . Please check June 24, 2025 at 11:39 AM, Mohammad Amir : Unfortunately we don't have materials. Thank you very much! June 24, 2025 at 11:47 AM, Mohammad Amir : @Viktoriia Hleba For your information:- Currently available Roll for Slitter 1/2/4/5:- Anode :-02 Cathode:-00 Slitter 3:- Anode :-54 Cathode:-07 Everything is in order ,as soon as material will be available for CA Slitter -4,AGV will bring the roll there. I am monitoring. Thank you very much! June 24, 2025 at 11:48 AM, Viktoriia Hleba : thanks!! June 24, 2025 at 11:48 AM, Mohammad Amir : You are welcome! June 24, 2025 at 12:06 PM, 박태영 : 네 음극은 그렇게 진행 필요할것 같습니다. June 24, 2025 at 12:34 PM, Kozma István : Gyertek légyszi katod1 2 rw June 24, 2025 at 12:35 PM, Oláh András : Megyünk June 24, 2025 at 12:37 PM, Viktoriia Hleba : 4 slitter cathode nincs Agv - 57 perc. June 24, 2025 at 12:38 PM, Mohammad Amir : Still we don't have materials available unfortunately. As soon as material will be available it will go to Slitter Cathode-4 by AGV. Thank you very much! June 24, 2025 at 12:52 PM, 배병민 (Bae Byoungmin) : @서지원 PM님 금일 포일 창고 크레인 점검으로 잠시 비가동 계획입니다. 문제되는 부분 있으시면 말씀 부탁드립니다. 만약 코터 생산이 필요 공정은 비가동던 포일 1롤씩만 미리 출고하여 버퍼로 진행 부탁드리겠습니다. ※ 비가동 계획 1. 포일 1창고 : 14:00~14:30 2. 포일 2창고 : 14:30~15:00 June 24, 2025 at 12:58 PM, Dániel Hufnágel : @Kozma István @Farkas Dániel Elekt, fólia raktár ellenőrzés miatt fél-fél órára megáll, ha esetleg kell ez idő alatt, fólia jellezétek ide nekünk June 24, 2025 at 1:10 PM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) E0STKC31 M01 매뉴얼 포트에 화물있는거 누가 데이터 지웠는데, 지금 확인 좀 가능하실까요? June 24, 2025 at 1:10 PM, 김태현 : @FA Cathode 1 2Rw error. June 24, 2025 at 1:11 PM, Oláh András : Comin June 24, 2025 at 1:19 PM, 송태용(Song tae yong) : 포크에러나서 에러조치후에 정상 가동중입니다 June 24, 2025 at 1:33 PM, Yena Valerii : Hello, pls come to ANODE SLITT 2, something happened to the conveyor June 24, 2025 at 1:40 PM, Mohammad Amir : @Oláh András Please check E0CNVA51_06_014/013 it is in Manual mode that's why there is traffic of recovery materials. Please make it Auto. Thank you very much! June 24, 2025 at 1:40 PM, Oláh András : On it June 24, 2025 at 2:27 PM, Deepu Divan FA-Eng : @FA technician, Could you please come to press anode 6 June 24, 2025 at 2:30 PM, Deepu Divan FA-Eng : @Dániel Hufnágel June 24, 2025 at 2:30 PM, Oláh András : @cehmannzsoltcehmann June 24, 2025 at 2:56 PM, Yena Valerii : Hello, on the 2nd press anode the material does not arrive, I made a repeat order, please check if the order has arrived June 24, 2025 at 2:57 PM, Mohammad Amir : Checking June 24, 2025 at 2:59 PM, Mohammad Amir : Please press LR again. Last job was cancelled by Operator and send to press Anode -1, that's why it didn't arrive to Anode press. Thank you very much! June 24, 2025 at 3:00 PM, Yena Valerii : okey, thank you June 24, 2025 at 3:00 PM, Mohammad Amir : Dear @All Please don't cancel the automatically generated jobs for process machines. Thank you very much! June 24, 2025 at 3:01 PM, Mohammad Amir : You are welcome! June 24, 2025 at 3:02 PM, 오승주 : There is a problem with the AGV of cathode 1 line 2 nd. Please check. June 24, 2025 at 3:02 PM, 오승주 : Coating June 24, 2025 at 3:02 PM, Oláh András : Comin June 24, 2025 at 3:03 PM, 서지원 : 점검 끝나셨으면 이제 사용 가능한가요? June 24, 2025 at 3:05 PM, 서지원 : 금일 오후 1시에도 양극 코팅 1라인 2nd R/W에서 문제가 발생한것으로 보이는데, 혹시 해당 위치에서만 계속 문제가 되는 이유나 개선책이 있을까요??? June 24, 2025 at 3:07 PM, 배병민 (Bae Byoungmin) : 네 점검후 생산 가동하였습니다 June 24, 2025 at 3:08 PM, 배병민 (Bae Byoungmin) : 네 제가 한번 확인 해보고 재발방지 공유드리겠습니다 June 24, 2025 at 3:13 PM, Mohammad Amir : @FA Please check E0STKC51_C01/C02 these cranes are inactive without error. Please make it active from SCS side , several jobs are pending. Thank you very much! June 24, 2025 at 3:30 PM, Yena Valerii : 30 minutes have passed since the reorder, can you please check? June 24, 2025 at 3:31 PM, Mohammad Amir : Sure, Checking! June 24, 2025 at 3:32 PM, Mohammad Amir : Are you referring to Anode press -2(E1PRA020_P01):- For this we still didn't receive LR. Thank you very much! June 24, 2025 at 3:33 PM, Yena Valerii : I have now reordered, please check if it has arrived June 24, 2025 at 3:34 PM, Mohammad Amir : Unfortunately still no LR received,last LR was at 13:37 it was unsuccessful because of the issue i explained earlier. Thank you very much! June 24, 2025 at 3:35 PM, Yena Valerii : thank you June 24, 2025 at 3:35 PM, Mohammad Amir : You are welcome! June 24, 2025 at 4:12 PM, 배병민 (Bae Byoungmin) : PM님 해당 문제 AGV#11 RW#2 진입 시, 반복적인 Retry 발생되는 문제로 노드 티칭 점검 및 조치로 재발 방지 해놓겠습니다. June 24, 2025 at 4:24 PM, ~Lidiia~리디 ~ : @FA On the 4 slitter cathode Agv 16 - stop u/w. Please check this. Thank you! June 24, 2025 at 4:26 PM, Oláh András : Coming June 24, 2025 at 4:38 PM, Koska Szilárd János : sziasztok anód press/slitre miért nem jönnek az anyagok?megnéznétek? June 24, 2025 at 4:39 PM, Koska Szilárd János : 1 db Agv se mozog a területen June 24, 2025 at 4:39 PM, Koska Szilárd János : állnak a gépek June 24, 2025 at 4:39 PM, Oláh András : Sztrájkolnak 😅 June 24, 2025 at 4:39 PM, Koska Szilárd János : köszönöm June 24, 2025 at 4:41 PM, Oláh András : @Mohammad Amir can you check LRs at anode press slitt area? June 24, 2025 at 4:41 PM, Oláh András : I see only 1 on press2 June 24, 2025 at 4:41 PM, Mohammad Amir : Sure! June 24, 2025 at 4:43 PM, Mohammad Amir : For Slitter , Only active LR for Slitter Anode -2:- AGV_17 on the way ✅. Checking for press. Thank you! June 24, 2025 at 4:44 PM, Mohammad Amir : For Anode Press:- There is no LR from all the process machines. Thank you very much! June 24, 2025 at 4:45 PM, Oláh András : Nincsenek benyomva a Load Request gombok. Jelenleg csak slitt2-re van anyag kérve June 24, 2025 at 4:46 PM, Koska Szilárd János : mindjárt nézem June 24, 2025 at 4:46 PM, Oláh András : In acs i see LR on anode press2. Is that correct from your side? June 24, 2025 at 4:47 PM, Koska Szilárd János : Anód press 2 -nél a bufferen sincs semilyen anyag June 24, 2025 at 4:48 PM, Mohammad Amir : There is no LR in Press -2 Anode in RTD and MCS side. Thank you! June 24, 2025 at 4:49 PM, Mohammad Amir : @Oláh András @Koska Szilárd János For your information:- Currently we have for Anode Slitter 1/2/4/5 Materials-4 Anode Slitter 3-62 Anode Press 1/2/7/8-1 Anode Press 3/4 -80 Thank you very much! June 24, 2025 at 4:52 PM, Mohammad Amir : @Oláh András @Yena Valerii Update :- We received LR for Anode press -2 at 16:50 successfully. Roll on the way with AGV#8. Thank you very much! June 24, 2025 at 4:52 PM, Oláh András : Yes we restart the transfer and now ok👍🏻 thank you! June 24, 2025 at 4:56 PM, Mohammad Amir : Dear @All Please don't cancel the automatically created job based on LR to process machines. It delays the production. For example:- For Anode press -2 LR received successfully at 13:34 however this job was cancelled by Operator at 13:54 and send this Roll to Anode press -1 Manually and afterwards ,no Roll arrived at Anode press -2 and we witnessed delay in production for Andoe Press-2. Thank you very much! June 24, 2025 at 4:56 PM, Mohammad Amir : Thank you very much! June 24, 2025 at 5:02 PM, Oláh András : I dont know who and why made these manual jobs. He always make more problems for everyone. June 24, 2025 at 5:08 PM, Mohammad Amir : Yes ,Anode production got delayed significantly for Anode press-2 for more than 3 hours due to this reason. June 24, 2025 at 6:03 PM, 김지수PM(Gyuri)_FA : @manufacturing Someone created the job manually from E0STKC31 to M01, but there is cargo and someone deleted the carrier ID after transportation. And RBC3205 is also waiting to be transported and this job was created by eletrode user. If there is no one who gonna release the carrier on the M01 port. I gonna delete this manual job. Thanks June 24, 2025 at 6:43 PM, Simon Attila F. A. : Sorry, i check. June 24, 2025 at 6:44 PM, Simon Attila F. A. : This material is here on this port. I ask for SL, if was'nt use, I send back to the warehouse. June 24, 2025 at 6:57 PM, Simon Attila F. A. : This message was deleted. June 24, 2025 at 6:59 PM, Simon Attila F. A. : @VK (mcs) please check this material, because standing on E0STK32_M01 with MCS buzzer error. June 24, 2025 at 7:00 PM, VK (mcs) : Is it E0STKC31-M01? June 24, 2025 at 7:06 PM, 김지수PM(Gyuri)_FA : @전극 음극 공릴트레이 수량이 창고에 많이 없어서, 1-2시간 후 릴슬리터CNV에 공급 지연이 될 수 있습니다. 감사합니다. June 24, 2025 at 7:19 PM, Simon Attila F. A. : This message was deleted. June 24, 2025 at 7:20 PM, Simon Attila F. A. : Yes, stkc31 of course. Sorry. June 24, 2025 at 7:23 PM, VK (mcs) : Rack in valid reply is :LOT in operation, cannot be warehoused June 24, 2025 at 8:05 PM, Simon Attila F. A. : Oh. I check again the id, and I tell you. Please be patient. June 24, 2025 at 8:45 PM, Simon Attila F. A. : The material id is ECM073F42024 ON E0STKC31_M1, the bobin id is RBC0371. June 24, 2025 at 8:48 PM, Simon Attila F. A. : @VK (mcs) the SCS display show EC4M073F42024 number, but on the ticket ECM, not EC4M. Please check this. June 24, 2025 at 8:50 PM, Simon Attila F. A. : Sorry. EC4M... The number looks very bad... June 24, 2025 at 8:51 PM, VK (mcs) : Checking June 24, 2025 at 9:10 PM, VK (mcs) : Unfortunately I couldn’t find any information about LOT. Please check the LOT in MES and if it is a LOT that has not been discarded, proceed to process confirmation. June 24, 2025 at 9:11 PM, Simon Attila F. A. : Ok. June 24, 2025 at 9:11 PM, Simon Attila F. A. : Thank you for help! June 24, 2025 at 11:50 PM, Pintér Gábor : Katód Jumbo raktárban 5 Agv vár egymásra June 24, 2025 at 11:51 PM, Simon Attila F. A. : Megyünk. June 25, 2025 at 1:26 AM June 25, 2025 at 1:26 AM, 김지수PM(Gyuri)_FA : @fa please check E0CNVA51 > full reels are not moving without any alarms June 25, 2025 at 1:28 AM, Viczai Tamás : I'm watching now. June 25, 2025 at 1:36 AM, Szarka Adrián : Sziasztok anod konvejor nézzetek meg legyszives áll az egész pálya June 25, 2025 at 1:36 AM, Szarka Adrián : Köszönöm June 25, 2025 at 1:36 AM, Simon Attila F. A. : Tomi már csinálja. June 25, 2025 at 1:37 AM, Szarka Adrián : Szuper köszönöm June 25, 2025 at 1:38 AM, Viczai Tamás : Félszint conveyor probléma van. June 25, 2025 at 5:52 AM, Pintér Gábor : Coating Katód 1 2nd rewinder nem áll be az agv June 25, 2025 at 6:02 AM, 김태현 : @FA Please check the cathode 1 agv. June 25, 2025 at 6:02 AM, 오승주 : There is a risk of stopping the cathode 1 line facility due to the coating AGV problem. Please take action. June 25, 2025 at 6:05 AM, Mr.Miti (미티) FA : This message was deleted. June 25, 2025 at 6:05 AM, Mr.Miti (미티) FA : Im here! June 25, 2025 at 6:07 AM, Mohammad Amir : Good morning Everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:19 Cathode:16 Slitter 3:- Anode:56 Cathode:00 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:02 Cathode:01 Press 3/4:- Anode:79 Cathode:00 Thank you very much! June 25, 2025 at 6:21 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 25, 2025 at 7:00 AM, ~Lidiia~리디 ~ : Hello, Cathode slitt unit 4 AGV number 7 can not enter and install the coil. Please check this. Thank you! June 25, 2025 at 7:01 AM, ~Lidiia~리디 ~ : There is also a problem with the conveyor on cathode slitt 4. Please check this. Thank you! June 25, 2025 at 7:09 AM, adambenczik : Solved June 25, 2025 at 7:11 AM, ~Lidiia~리디 ~ : Thank you June 25, 2025 at 8:01 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 1 mögött a conveyor megállt Gyertek valaki légyszíves June 25, 2025 at 8:01 AM, Karina Lyzanets : Köszi June 25, 2025 at 8:02 AM, Mr.Miti (미티) FA : Megyek June 25, 2025 at 8:05 AM, Mr.Miti (미티) FA : Solved June 25, 2025 at 8:32 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVC51_8_020 there is DV-01 Diverter Up error. Thank you very much! June 25, 2025 at 8:36 AM, adambenczik : Solved June 25, 2025 at 8:49 AM, Mohammad Amir : @adambenczik Please check E0STKA51_C01/C02 is inactive without error. Please make it active from SCS side ,several recovery materials waiting on the CNVA51. Thank you very much! June 25, 2025 at 8:54 AM, adambenczik : Checking June 25, 2025 at 9:32 AM, Mohammad Amir : @adambenczik Please check E0CNVC51_08_199 there is Data Loss error and it has blocked the materials recovery. Thank you very much! June 25, 2025 at 9:42 AM, adambenczik : Solved June 25, 2025 at 9:46 AM, Mohammad Amir : @adambenczik Please check empty tray LTA0444 located at E0CNVA51_06_043 it is not moving for quite some time and blocking empty trays delivery. Everything is good from MCS RTD side ✅. Please check physically tray Position. Thank you very much! June 25, 2025 at 10:00 AM, adambenczik : Good now June 25, 2025 at 10:08 AM, adambenczik : Ki adott olyan parancsot hogy Anód 15-ös AGV a press 1-től hozzon anyagot a 32-es raktárba? June 25, 2025 at 10:09 AM, Mr.Miti (미티) FA : Sg szám ? June 25, 2025 at 10:09 AM, adambenczik : Nincs SG szám June 25, 2025 at 10:10 AM, adambenczik : Origin:MCS June 25, 2025 at 10:11 AM, Mohammad Amir : Please tell me carrier id ,I will investigate. Thank you very much! June 25, 2025 at 10:12 AM, adambenczik : RBA0649 09:30 June 25, 2025 at 10:15 AM, Mohammad Amir : Sure, Checking! June 25, 2025 at 10:20 AM, Mohammad Amir : Hello, First the job was cancelled by Operator and afterwards job was automatically generated from Press -1 to STK32. Thank you very much! June 25, 2025 at 11:28 AM, Margaret : Hello. Come pls anode the conveyor stopped June 25, 2025 at 11:37 AM, adambenczik : Korean workers have stopped the conveyor June 25, 2025 at 11:47 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 금일 포일 창고 추가로 크레인 점검이 필요하여 잠시 비가동 계획입니다. 문제되는 부분 있으시면 말씀 부탁드립니다. 만약 코터 생산이 필요 공정은 비가동던 포일 1롤씩만 미리 출고하여 버퍼로 진행 부탁드리겠습니다. ※ 비가동 계획 1. 포일 1창고 : 14:00~14:30 June 25, 2025 at 12:36 PM, Mohammad Amir : @FA Please check Foil-2 warehouse C01 there is MCP Control Power CP trip error. Thank you very much! June 25, 2025 at 12:38 PM, 김태현 : @FA Please check the cathode 1 agv. June 25, 2025 at 12:39 PM, 김태현 : 양극1라인 2번R/w Agv 잘 안맞는데 확인해주세요 June 25, 2025 at 12:39 PM, 배병민 (Bae Byoungmin) : @Mr.Miti (미티) FA June 25, 2025 at 12:41 PM, adambenczik : Solved June 25, 2025 at 12:42 PM, 김태현 : 코팅끊어질거같아요 June 25, 2025 at 1:05 PM, Szeitz Flórián : Anód roll raktár 5stoker-nèl rossz portra lett kikérve a roll. Légyszives Gyertek köszönöm June 25, 2025 at 1:08 PM, ~Lidiia~리디 ~ : @FA There is a problem with the AGV on the slitt unit 4 cathode. Please check this. Thank you! June 25, 2025 at 1:13 PM, adambenczik : AGV#19 ide fog jönni, ki veszi a raktárból, és egyből rakja is majd vissza az 5-ösbe June 25, 2025 at 1:19 PM, Sárvári Márk : @Mr.Miti (미티) FA szeretnénk segítséget kérni Anod 1es R/W-re.✌️ June 25, 2025 at 1:19 PM, adambenczik : Jövök June 25, 2025 at 1:47 PM, Margaret : Come pls anode the conveyor stopped June 25, 2025 at 1:51 PM, Mr.Miti (미티) FA : Coming June 25, 2025 at 1:55 PM, Mr.Miti (미티) FA : It was stopped for work. It will be restarted as soon as it is finished. June 25, 2025 at 2:17 PM, Sárvári Márk : Újabb AGV probléma az Anod 1en, need help, please✌️ June 25, 2025 at 2:29 PM, 배병민 (Bae Byoungmin) : 포일 1창고 크레인 점검 완료되어 정상 생산 진행하였습니다. Down time : 14:00~14:30 June 25, 2025 at 2:42 PM, 김건희 : 7번 agv 양극 3번 Roll 창고 앞에서 계속 멈춰 있는데 확인 요청드립니다 June 25, 2025 at 2:46 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51_06_043/20 there is Data loss error and it has stopped the empty trays delivery. Thank you very much! June 25, 2025 at 2:58 PM, Mohammad Amir : Maintenance is still going on E0CNVA51? Thank you very much! June 25, 2025 at 3:01 PM, Mr.Miti (미티) FA : Cheking June 25, 2025 at 3:01 PM, Mohammad Amir : Issue has been resolved now ✅. No need to check. Thank you very much! June 25, 2025 at 3:42 PM, 김태현 : @FA cathode 1 Agv is not coming. June 25, 2025 at 3:42 PM, 김태현 : 코팅 양극1라인 AGV 안오고있어요 June 25, 2025 at 3:46 PM, 김태현 : 생산멈출거같아요 June 25, 2025 at 3:48 PM, Margaret : Come pls anode the conveyor stopped 2-3 slitt June 25, 2025 at 3:50 PM, 김태현 : This message was deleted. June 25, 2025 at 3:53 PM, 서지원 : @KIM SEYEON [김세연]_FA 어제 오늘만 해도 5번째 같은 위치, 같은 이슈입니다. 양극 코팅 1라인 2nd R/W 대처 방안이 없을까요? June 25, 2025 at 3:53 PM, ~Lidiia~리디 ~ : @FA An error occurred on the cathode slitt unit 4 with the tray on the conveyor. Please come and check it out. Thank you! June 25, 2025 at 3:54 PM, 김태현 : 코팅 양극1라인 1번 R/w agv 언제와요.. June 25, 2025 at 3:54 PM, KIM SEYEON [김세연]_FA : 잠시만요 확인하보겠습니다. June 25, 2025 at 3:55 PM, KIM SEYEON [김세연]_FA : 지금 AGV 17호기가 가고 있는것으로 보입니다. June 25, 2025 at 3:55 PM, adambenczik : That was me. I sent the AGV June 25, 2025 at 4:33 PM, Szeitz Flórián : Sziasztok! Katód press 7 UW robot probléma . Gyertek légyszives nézzétek meg Köszönöm June 25, 2025 at 4:36 PM, Mr.Miti (미티) FA : Megyek megnézem. June 25, 2025 at 4:44 PM, Mr.Miti (미티) FA : Kész June 25, 2025 at 4:46 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0CNVA51 08-019 there is Data Loss error and it is blocking materials recovery. Thank you very much! June 25, 2025 at 4:47 PM, Mr.Miti (미티) FA : Checking June 25, 2025 at 4:54 PM, Mr.Miti (미티) FA : Work is underway on site. Once completed, the situation will return to normal. June 25, 2025 at 4:54 PM, Mohammad Amir : Thank you very much for the confirmation! June 25, 2025 at 4:55 PM, Mr.Miti (미티) FA : You’re welcome! June 25, 2025 at 5:32 PM, Mohammad Amir : Dear @All, Next LOT available Electrode Slitter 1/2/4/5:- Anode:44 Cathode:19 Slitter 3:- Anode:50 Cathode:02 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:01 Cathode:01 Press 3/4:- Anode:63 Cathode:00 Thank you very much! June 25, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.25. "B" műszak, 11+2+2/12+2 Tech, 1SL Overtime(2): Gégény Dávid, Kertész Dániel Holiday(1): Böröczki Balázs Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Kovács Ágnes --------------- Assy 1F (3): Gégény Dávid, Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovits Kevin, Denkó János, June 25, 2025 at 6:43 PM, Viktoriia Hleba : sziasztok anode convejor stop. June 25, 2025 at 6:43 PM, Viktoriia Hleba : 2 slitt anode convejor reel stop. June 25, 2025 at 6:44 PM, Czeilinger Krisztián : Megyünk. June 25, 2025 at 6:50 PM, Szarka Adrián : Sziasztok Coating anod 1 A oldalon ki állt az agv hibára 3 számú June 25, 2025 at 6:50 PM, Szarka Adrián : Gyertek legyszives köszi June 25, 2025 at 6:51 PM, Czeilinger Krisztián : Megyünk. June 25, 2025 at 6:51 PM, Szücs Géza FT-B : Coater elsődleges. @Czeilinger Krisztián @Rácz Dániel / FA @Böröcz Tamás @Pálosi Róbert valaki menjen légyszives June 25, 2025 at 6:51 PM, Czeilinger Krisztián : Kész June 25, 2025 at 6:53 PM, Viktoriia Hleba : most nem jó 3 slitter anode convejor. Please check June 25, 2025 at 6:54 PM, Czeilinger Krisztián : Megyek. June 25, 2025 at 6:55 PM, Szücs Géza FT-B : a Coatingra menjetek, most írtam hogy az a fontosabb June 25, 2025 at 6:56 PM, Pálosi Róbert : Itt vagyok xotingon June 25, 2025 at 7:07 PM, Czeilinger Krisztián : Kész June 25, 2025 at 9:10 PM, 임동현 : anode AGV 24 stopped June 25, 2025 at 9:33 PM, Viktoriia Hleba : anode slitt 3-4 convejor stop. June 25, 2025 at 9:34 PM, Czeilinger Krisztián : Megyek. June 25, 2025 at 9:42 PM, Czeilinger Krisztián : Kész. June 25, 2025 at 9:50 PM, Szarka Adrián : @Szücs Géza FT-B Coating be küldött a raktárba 2 roll de nekünk az kéne SOS de nem tudjuk ki szedni a 4 raktarbol abba van az RBA0832 June 25, 2025 at 9:50 PM, Szarka Adrián : Az RBA0831 meg eltűnt nem találjuk egyik raktárban se June 25, 2025 at 9:52 PM, Szarka Adrián : Utána tudsz nézni hogy hova lett az a roll ? June 25, 2025 at 9:56 PM, Szücs Géza FT-B : utoljára a rendszer a 21es AGV-n látta June 25, 2025 at 9:57 PM, Szarka Adrián : Ez meg van azért nem tudjuk ki szedni mert épp a buffer rossz és azon van még ☺️☺️☺️ June 25, 2025 at 9:57 PM, Szücs Géza FT-B : 20:57-kor June 25, 2025 at 9:57 PM, Szücs Géza FT-B : az is szép June 25, 2025 at 9:57 PM, Szarka Adrián : És azt megtudnád mondani hogy az merre volt ? Vitte a raktárba ? Vagy pressen már valahova ? June 25, 2025 at 9:59 PM, Szücs Géza FT-B : 21:34kor lett presselve a 2esen June 25, 2025 at 9:59 PM, Szarka Adrián : Meg találtuk nagyon szépen köszönöm ki vitte a Press 2 re June 25, 2025 at 9:59 PM, Szarka Adrián : Köszönjük szépen June 25, 2025 at 9:59 PM, Szücs Géza FT-B : jah várj June 25, 2025 at 10:00 PM, Szücs Géza FT-B : fordítva néztem a listát. logikus lenne, hogy legfölül legyen s legfrissebb infó June 25, 2025 at 10:00 PM, Szücs Géza FT-B : nem itt van 😉🤣 June 25, 2025 at 10:00 PM, Szarka Adrián : Jól nézted itt van a Press 2 gépen az egyik ami kell nekünk June 25, 2025 at 10:01 PM, Szarka Adrián : A másik meg be van ragadva a roll raktárba a bufferen valami error hiba van krisztianek ott vannak June 25, 2025 at 10:02 PM, Szücs Géza FT-B : az RBA0832 az A34es raktárban van June 25, 2025 at 10:03 PM, Szarka Adrián : Coatingnak kell SOS vissza jelzés miatt ez a 2 roll June 25, 2025 at 10:03 PM, Szücs Géza FT-B : várj egy kicsit June 25, 2025 at 10:03 PM, Szarka Adrián : Igen igen csak a bufferen van mert error üzenetben van June 25, 2025 at 10:04 PM, 임동현 : Please check the error in the Cathode roll warehouse #1, #2 June 25, 2025 at 10:04 PM, Szücs Géza FT-B : 3as AGV elmegy, 7es kijön utána, 24es meg majd kiviszi. kb 2-4 perc és az AGV-n lesz a 32es June 25, 2025 at 10:05 PM, Szücs Géza FT-B : AGV CA 16 és CA2 @Pálosi Róbert nézzétek meg légyszives June 25, 2025 at 10:06 PM, Szücs Géza FT-B : @Czeilinger Krisztián tegyed autoba légyszives A34 TR portot June 25, 2025 at 10:10 PM, VK (mcs) : @FA Please check Anode reel conveyor A51 (6042) Data mismatch error. June 25, 2025 at 10:16 PM, 지찬우 : Can you move materials from anode warehouse 4AGV port to warehouse 4 manual port? RBA0832 June 25, 2025 at 10:22 PM, Anton Mashchenko : Anode press 7, AGV not coming 35 min, help! June 25, 2025 at 10:26 PM, Viktoriia Hleba : 3 slitt anode nincs tálca. Please check June 25, 2025 at 10:32 PM, 임동현 : anode sliter 3 empty tray is not coming June 25, 2025 at 10:33 PM, VK (mcs) : There is an issue in conveyor. I already informed to @FA team June 25, 2025 at 10:44 PM, 임동현 : Cathode AGV 12 stopped June 25, 2025 at 10:44 PM, Viktoriia Hleba : 2-3 slitter anode stop. Nincs tálca . June 25, 2025 at 10:45 PM, Czeilinger Krisztián : Megyek. June 25, 2025 at 10:48 PM, Rácz Dániel / FA : Anód conveyor megy June 25, 2025 at 10:50 PM, Rácz Dániel / FA : Checking June 25, 2025 at 11:05 PM, Rácz Dániel / FA : @Böröcz Tamás gyere az A33 hoz June 25, 2025 at 11:06 PM, Rácz Dániel / FA : @tbm June 26, 2025 at 12:07 AM June 26, 2025 at 12:07 AM, Nagy Dávid 4 : Anod slit 2 robot nem jó help help köszönöm szépen June 26, 2025 at 12:11 AM, Czeilinger Krisztián : Megyek. June 26, 2025 at 12:11 AM, Viktoriia Hleba : r/w June 26, 2025 at 12:17 AM, Czeilinger Krisztián : Kész June 26, 2025 at 12:18 AM, Czeilinger Krisztián : Kész June 26, 2025 at 12:44 AM, Dana Honak : Cathode slitt 4 talca Nem helyes helyzet June 26, 2025 at 12:45 AM, Czeilinger Krisztián : Megyek. June 26, 2025 at 12:59 AM, Dana Honak : Cathode slitt 2 nincs tarca June 26, 2025 at 1:00 AM, Nagy Dávid 4 : Anod roll raktár 21 számú agv pozíció probléma help help köszönöm szépen June 26, 2025 at 1:04 AM, Nagy Dávid 4 : Gyertek légyszíves mert megint minden áll köszönöm szépen June 26, 2025 at 1:06 AM, Viktor Vadas : Sziasztok! Katod 1 2-es rewindernel az Agv nem talalja a poziciojat, ehhez kernenk segitseget! Koszonom! June 26, 2025 at 1:08 AM, Aloshyn Yevhen : Anode press 1 U/W robot servo error June 26, 2025 at 1:08 AM, 임동현 : Cathode slitt 2 tray does not come June 26, 2025 at 1:10 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8034) June 26, 2025 at 1:34 AM, Szabó Zoltán János : Sziasztok, Katod 2, 2.r/w-hez szeretnek azonnali segitseget kerni. Fenykapuba belepes tortent es nem tudjuk vissza allitani alapba. Koszonom. June 26, 2025 at 1:36 AM, 임동현 : anode press 7 Please check the L/R June 26, 2025 at 1:36 AM, Szabó Zoltán János : Automataba van teve de meg se moccan. June 26, 2025 at 1:47 AM, VK (mcs) : LR received at 1:05 June 26, 2025 at 1:48 AM, Dana Honak : Katod slitt 4 gepen nem jo a reel talca szam June 26, 2025 at 1:48 AM, Dana Honak : Gyertek legszives June 26, 2025 at 1:48 AM, Dana Honak : Koszonom June 26, 2025 at 1:49 AM, Czeilinger Krisztián : Megyek . June 26, 2025 at 2:14 AM, Rácz Dániel / FA : @Böröcz Tamás menj létszíves segíteni a CA Slitt 3-4 conveyorhoz June 26, 2025 at 2:15 AM, Böröcz Tamás : Tudom June 26, 2025 at 2:15 AM, Böröcz Tamás : Csak közben a cotingon is vagyok June 26, 2025 at 2:24 AM, Dana Honak : Cathode slit 1-2 ninc AGV! June 26, 2025 at 2:25 AM, Nagy Dávid 4 : Anod slitt 1 25 számú agv kiált hibára help help köszönöm szépen June 26, 2025 at 2:31 AM, Aloshyn Yevhen : Anod press 7 agv r/w error June 26, 2025 at 2:32 AM, Aloshyn Yevhen : Anode press 2 don’t have material 20 min June 26, 2025 at 2:32 AM, Rácz Dániel / FA : Nem sokàra megyek AN slitt 1 en vagyok June 26, 2025 at 2:33 AM, VK (mcs) : @FA Please check Anode Roll STK A32 -P01. Thx June 26, 2025 at 2:35 AM, Rácz Dániel / FA : @VK (mcs) please check June 26, 2025 at 2:36 AM, Rácz Dániel / FA : Im goning June 26, 2025 at 2:36 AM, Böröcz Tamás : @방혁 PM(Bang.Hyuk) FA CA Coating2 rw2 OoS June 26, 2025 at 2:36 AM, Rácz Dániel / FA : Help help June 26, 2025 at 2:37 AM, Böröcz Tamás : We need a miracle June 26, 2025 at 2:37 AM, Rácz Dániel / FA : And rainbow June 26, 2025 at 2:39 AM, Rácz Dániel / FA : Solved ? June 26, 2025 at 2:42 AM, VK (mcs) : Yes thank you, it will deliver soon. June 26, 2025 at 2:43 AM, Rácz Dániel / FA : You are welcome June 26, 2025 at 2:51 AM, Szabó Zoltán János : Ez a hiba tovabbra is fennall. Az 1.r/w jol mukodik. June 26, 2025 at 3:04 AM, Nagy Dávid 4 : Cathode slit 4 conveyor stop help help köszönöm szépen June 26, 2025 at 3:07 AM, 임동현 : anode press 2 Please check the L/R June 26, 2025 at 3:10 AM, Rácz Dániel / FA : Kész June 26, 2025 at 3:11 AM, Rácz Dániel / FA : @VK (mcs) please, thanks June 26, 2025 at 3:14 AM, VK (mcs) : LR received at 3:13 RBA0759 assigned June 26, 2025 at 3:18 AM, Rácz Dániel / FA : Tajh you June 26, 2025 at 3:56 AM, Aloshyn Yevhen : Anode press 1 R/W robot error June 26, 2025 at 3:56 AM, Czeilinger Krisztián : Gloing June 26, 2025 at 4:04 AM, Czeilinger Krisztián : Kész June 26, 2025 at 4:05 AM, Viktoriia Hleba : Cathode Slitt 1 nincs AGV - 30 perc June 26, 2025 at 4:06 AM, VK (mcs) : No available material June 26, 2025 at 4:12 AM, Szücs Géza FT-B : AN CNV liftnél hiba June 26, 2025 at 4:13 AM, Czeilinger Krisztián : Megyek. June 26, 2025 at 4:41 AM, Szarka Adrián : Sziasztok anod Slitt 1-2 re nincs agv June 26, 2025 at 4:42 AM, Szarka Adrián : Legyszives nézzetek utána miért köszönöm June 26, 2025 at 4:42 AM, Szücs Géza FT-B : @VK (mcs) can you check please June 26, 2025 at 4:47 AM, VK (mcs) : For both jobs assigned from STKA32 But as I see, there is another carriers in u to port but crane is not transfer it. June 26, 2025 at 4:48 AM, Szarka Adrián : @Szücs Géza FT-B June 26, 2025 at 4:49 AM, Szücs Géza FT-B : Thank You June 26, 2025 at 4:50 AM, VK (mcs) : Anytime June 26, 2025 at 4:52 AM, Nagy Dávid 4 : Anod 8 számú agv kiált hibára help help köszönöm szépen June 26, 2025 at 4:53 AM, Szarka Adrián : Anod Press 4 re se jön az agv 40 perce June 26, 2025 at 4:54 AM, Szücs Géza FT-B : @VK (mcs) RBA0966, which order was it in? June 26, 2025 at 4:54 AM, Böröcz Tamás : RBA0966 RBA1001 is there June 26, 2025 at 4:55 AM, Böröcz Tamás : But what reason? June 26, 2025 at 4:56 AM, VK (mcs) : Both carriers have destination to inside the STK. RBA0966 from Press 3 RBA1001 from Press 1 June 26, 2025 at 4:57 AM, Szücs Géza FT-B : thanks June 26, 2025 at 4:57 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA in StKA32 RBA0966 need go inside, please create somebody an order to this June 26, 2025 at 4:58 AM, VK (mcs) : Do you mean unwinding or re-winding? June 26, 2025 at 4:59 AM, Szücs Géza FT-B : No. This Roll on the STK homestand. need go inside to WH this Roll blockink the anothers June 26, 2025 at 4:59 AM, Szarka Adrián : Szerintem az elektromos szekrény van neki útban az Sl asztalnál ami oda van telepitve @Szücs Géza FT-B June 26, 2025 at 4:59 AM, 한동석 : @FA 양극 1라인 이재기 진입상태에서 알람울리며 이재기 멈췄습니다 10분뒤 터렛하기때문에 조치 안되면 설비 멈춰야합니다 빠른조치 부탁드립니다. June 26, 2025 at 5:01 AM, VK (mcs) : Yes, I understand. Thanks He is asking, I think Press 4 waiting for AGV, Around 40 minutes June 26, 2025 at 5:02 AM, 김지수PM(Gyuri)_FA : 1001 also? June 26, 2025 at 5:03 AM, VK (mcs) : Yes, please create a transfer command for both. All jobs assigned from this STK and they are pending. Thanks June 26, 2025 at 5:06 AM, 김지수PM(Gyuri)_FA : 3017 has to be input mode June 26, 2025 at 5:07 AM, VK (mcs) : Yes correct but sadly I can not change it by system. June 26, 2025 at 5:13 AM, 김지수PM(Gyuri)_FA : @could you please check the e0stka32 P01? Has to be input June 26, 2025 at 5:18 AM, Csanálosi Gábor FA : Slit 1-2 conveyor tálca elakadás June 26, 2025 at 5:19 AM, Viktoriia Hleba : 2 slitt anode convejor stop. Please check June 26, 2025 at 5:20 AM, Szücs Géza FT-B : besegítenél légyszi es June 26, 2025 at 5:33 AM, Csanálosi Gábor FA : Solved June 26, 2025 at 5:39 AM, 김지수PM(Gyuri)_FA : Could you please change the mode from auto to manual and then auto please June 26, 2025 at 5:39 AM, 김지수PM(Gyuri)_FA : I updated the location information June 26, 2025 at 6:09 AM, Shakir (MCS) : @FA Please check E0STKA34(3009) : T-Axis RLS Error. E0CNVA51_06_016 : Run time over error. E0STKA32: 3017 (P01) has to be input mode, carriers are blocked. Thank you June 26, 2025 at 6:13 AM, Sárvári Márk : Joreggelt Anod 1-re kérnénk segítséget, AVG probléma miatt June 26, 2025 at 6:14 AM, Sárvári Márk : Probléma elhárítva June 26, 2025 at 6:15 AM, Margaret : Hello.anode convejor stop. Please check June 26, 2025 at 6:17 AM, Mr.Miti (미티) FA : Solved June 26, 2025 at 6:18 AM, Mr.Miti (미티) FA : A minute and I arrived June 26, 2025 at 6:22 AM, adambenczik : Solved June 26, 2025 at 6:30 AM, Szeitz Flórián : Anód Slitt 1-2 re nem érkezik a roll . Megnézitek az okát? Köszönöm June 26, 2025 at 6:33 AM, Shakir (MCS) : Hello, Last job cancelled by OP Please Press LR again Thank you June 26, 2025 at 6:33 AM, Mr.Miti (미티) FA : Rajta vagyok June 26, 2025 at 6:41 AM, Szeitz Flórián : This message was deleted. June 26, 2025 at 6:42 AM, Szeitz Flórián : LR ismét benyomásra került June 26, 2025 at 6:49 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 26, 2025 at 6:51 AM, Shakir (MCS) : LR yet not received, try again June 26, 2025 at 6:52 AM, Mr.Miti (미티) FA : Don't worry! We're working on the case! June 26, 2025 at 6:52 AM, Shakir (MCS) : Thank you June 26, 2025 at 7:14 AM, Mr.Miti (미티) FA : Eveything its Okay! June 26, 2025 at 7:20 AM, Mr.Miti (미티) FA : @Szeitz Flórián AN slitt 1-2re elindultak a rollok. June 26, 2025 at 7:20 AM, Szeitz Flórián : Köszönöm June 26, 2025 at 8:38 AM, 배병민 (Bae Byoungmin) : @서지원 PM님 안녕하세요 금일 음극 코터 4라인 생산 계획 공유주시면 참고하여 대응 하겠습니다 June 26, 2025 at 10:06 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_037 is OOS and blocked empty trays delivery. Thank you June 26, 2025 at 10:07 AM, Mr.Miti (미티) FA : Okay June 26, 2025 at 10:13 AM, Yena Valerii : Hello, pls come to cathode press 3, problem with R/W June 26, 2025 at 10:15 AM, Mr.Miti (미티) FA : Solved June 26, 2025 at 10:19 AM, Mr.Miti (미티) FA : Solved June 26, 2025 at 11:27 AM, Margaret : Hello.anode no tray . Please check June 26, 2025 at 11:28 AM, Mr.Miti (미티) FA : Checking June 26, 2025 at 11:33 AM, Mr.Miti (미티) FA : This message was deleted. June 26, 2025 at 11:34 AM, Mr.Miti (미티) FA : Solved June 26, 2025 at 1:12 PM, Oleksii Krasnoshchok : Anode press 7 long time waiting Agv u/w June 26, 2025 at 1:12 PM, Mr.Miti (미티) FA : Cheking June 26, 2025 at 1:17 PM, Shakir (MCS) : Press LR again, Thanks June 26, 2025 at 1:21 PM, Shakir (MCS) : RBA1078 assigned to Press7 Thank you June 26, 2025 at 1:22 PM, Shakir (MCS) : AGV18 on the way June 26, 2025 at 1:22 PM, Mr.Miti (미티) FA : Me too! June 26, 2025 at 1:56 PM, Shakir (MCS) : @FA Please check E0CNVA51 08-043 there is Data Loss error. Thank you June 26, 2025 at 1:59 PM, Mr.Miti (미티) FA : Someone sitting on the conveyor (confused) and working on it June 26, 2025 at 2:04 PM, Mr.Miti (미티) FA : @Szeitz Flórián @Karina Lyzanets Atmenetei empty tray shortage and full tray congestion may occur CA slitt long cv. They are working on it, as soon as they are ready the situation will normalize. June 26, 2025 at 2:06 PM, Mr.Miti (미티) FA : *temporary June 26, 2025 at 2:15 PM, Mr.Miti (미티) FA : Work finished. June 26, 2025 at 2:44 PM, Shakir (MCS) : This message was deleted. June 26, 2025 at 2:45 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_129 there is Run time error. Thank you June 26, 2025 at 2:45 PM, Mr.Miti (미티) FA : Checking June 26, 2025 at 2:46 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_012 there is Run time error. Thank you June 26, 2025 at 2:46 PM, Mr.Miti (미티) FA : Checking too June 26, 2025 at 2:57 PM, Mr.Miti (미티) FA : Solved June 26, 2025 at 3:04 PM, 박정근(Park) : 현재 전체 AGV가 인터넷 통신이상으로 멈췄다고합니다. 그와동시에 양극 1라인 1번 이재기도 멈췄습니다 혹시 대응가능하신분 계신가요... June 26, 2025 at 3:12 PM, 김건희 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) 확인 부탁드립니다 June 26, 2025 at 3:19 PM, 연해리 : 14:58~15:05 코터부터 프레스 U/W부까지 AGV 약 12대 가량 통신이상 발생하였고, 현재는 정상 가동중입니다. 원인파악 해보겠습니다 June 26, 2025 at 4:16 PM, Karina Lyzanets : Sziasztok, Slitt Cathode 1 mögött megállt a conveyor June 26, 2025 at 4:16 PM, Karina Lyzanets : Kérlek nézzetek meg June 26, 2025 at 4:16 PM, Karina Lyzanets : Köszi June 26, 2025 at 4:17 PM, Mr.Miti (미티) FA : Megyek June 26, 2025 at 4:21 PM, Mr.Miti (미티) FA : Kész June 26, 2025 at 4:24 PM, Margaret : .anode slitt 3 problem with the transfer. Please check June 26, 2025 at 4:25 PM, Mr.Miti (미티) FA : Okay June 26, 2025 at 5:24 PM, waseem/ Iváncsa Fa : In cathode stk 2 the roll stuck between due to ips error June 26, 2025 at 5:29 PM, waseem/ Iváncsa Fa : Solved thank you June 26, 2025 at 5:29 PM, Mr.Miti (미티) FA : Thank you to June 26, 2025 at 6:16 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.26. "B" műszak, 10+2+1/12+2 Tech, 1SL Overtime(1): Fabriczius Gergely Holiday(2): Böröczki Balázs, Csanálosi Gábor Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Por: Rácz Dániel, Nagy Sándor(op) Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Kovács Ágnes, Fabriczius Gergely NC Op: Gombos Norbert --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovi June 26, 2025 at 7:02 PM, Nagy Dávid 4 : Anod slitt 5 robot probléma help help köszönöm szépen June 26, 2025 at 7:03 PM, Czeilinger Krisztián : Megyek. June 26, 2025 at 7:04 PM, duzzaman Md (MCS) : @FA PLEASE CHECK SERVO MOTOR ALARM AT E0CNVA_6217 Thanks June 26, 2025 at 7:59 PM, Viktor Vadas : Sziasztok! Katod 2 2-es rewinderhez kernek segitseget! Koszonom! June 26, 2025 at 8:00 PM, Viktor Vadas : Csak megallt pihenni, mostmar elindult June 26, 2025 at 8:39 PM, Szücs Géza FT-B : @duzzaman Md (MCS) Important! Slitt havent empty reel tray, it is needeng. But NOT from E0STKA52, this wh very busy. Slitting needing empty trays from E0STKA51. there are few tasks in this STK. Thank You very much!👌 June 26, 2025 at 8:47 PM, Viktoriia Hleba : This message was deleted. June 26, 2025 at 8:48 PM, Viktoriia Hleba : 2 slitter anode nincs tálca . please check June 26, 2025 at 8:50 PM, Viktoriia Hleba : anode convejor lift nagyon lassan visz el June 26, 2025 at 8:50 PM, duzzaman Md (MCS) : This message was deleted. June 26, 2025 at 8:52 PM, duzzaman Md (MCS) : Released several from 51 June 26, 2025 at 8:53 PM, Szücs Géza FT-B : úton vannak a tálcák mindenhova June 26, 2025 at 8:53 PM, duzzaman Md (MCS) : Is there June 26, 2025 at 8:57 PM, Viktoriia Hleba : Csak most van még egy, lassan érkeznek. June 26, 2025 at 9:02 PM, Viktoriia Hleba : anod slitt convejor stop! June 26, 2025 at 9:03 PM, Czeilinger Krisztián : Megyek. June 26, 2025 at 9:11 PM, Szarka Adrián : Állnak a Slitt gépek anod oldalon June 26, 2025 at 9:11 PM, Szarka Adrián : Nincs talca June 26, 2025 at 9:11 PM, Szarka Adrián : @Nagy Dávid 4 el jöttem Mixingre. Figyelj legyszi June 26, 2025 at 9:12 PM, Nagy Dávid 4 : Dolgoznak rajta June 26, 2025 at 9:20 PM, duzzaman Md (MCS) : E0CNVA51_06_014/13/043/047 DATA LOSS ERROR June 26, 2025 at 9:32 PM, Szücs Géza FT-B : LTA0462 June 26, 2025 at 9:43 PM, 지찬우 : 음극 슬리터 1,2,5호기 컨베이어 문제로 비가동 발생하고 있습니다 조치 가능한 인력 있으신가요?? June 26, 2025 at 9:44 PM, 방혁 PM(Bang.Hyuk) FA : 오늘 인원이 많이 모자릅니다..조금만 기다려주세요 금방 조치해보겠습니다 June 26, 2025 at 9:44 PM, 지찬우 : 네 알겠습니다 June 26, 2025 at 9:44 PM, 방혁 PM(Bang.Hyuk) FA : 감사합니다 June 26, 2025 at 9:44 PM, 지찬우 : 현지 테크니션 조치 안되고 있습니다 June 26, 2025 at 9:49 PM, KIM SEYEON [김세연]_FA : @지찬우 현재 조립쪽 상황이 조금 더 급하여 지원중이니 조금만 더 기다려주세요. 죄송합니다. June 26, 2025 at 9:50 PM, 지찬우 : 알겠습니다 June 26, 2025 at 10:03 PM, Szücs Géza FT-B : kész June 26, 2025 at 10:17 PM, Viktoriia Hleba : anode convejor stop. Please check June 26, 2025 at 10:17 PM, Nagy Dávid 4 : Anod slitt 5 konvejor ismét megált help help köszönöm szépen June 26, 2025 at 10:18 PM, duzzaman Md (MCS) : @Fa A51_06_01_/017 Inv 01 run time over error. Thank you June 26, 2025 at 10:32 PM, 김지수PM(Gyuri)_FA : 음극 릴슬리터CNV 우선순위 조정 중입니다. 빠르게 공릴 공급될 수 있도록 하겠습니다. June 26, 2025 at 10:57 PM, Viktoriia Hleba : anode cinvejor stop. Please check June 26, 2025 at 11:05 PM, Szarka Adrián : Sziasztok katod Press 2 gépen jött le ez a roll RBC0907 megtudnátok mondani hova vitte az agv ? Mert nem találjuk. June 26, 2025 at 11:06 PM, Szarka Adrián : Kb olyan 21-22 óra körül vihette el az agv June 26, 2025 at 11:06 PM, duzzaman Md (MCS) : Its currently on EOJGV01_VC01 June 26, 2025 at 11:08 PM, Nagy Dávid 4 : And where can we find this because it's not in stock? June 26, 2025 at 11:12 PM, duzzaman Md (MCS) : Now in E1SLC010_P01 June 26, 2025 at 11:13 PM, Nagy Dávid 4 : Thank you very much for your help. June 26, 2025 at 11:16 PM, Nagy Dávid 4 : Anod press 8 25 számú agv kiált hibára help help köszönöm szépen June 26, 2025 at 11:31 PM, Szücs Géza FT-B : @duzzaman Md (MCS) can you tell me please, where is the LTA0066 reel tray? Thank You very much June 26, 2025 at 11:33 PM, duzzaman Md (MCS) : Currwnt location is E0STKA51 0202907 Thank you June 26, 2025 at 11:37 PM, Szücs Géza FT-B : this reel tray NG, if it is full, will stuck on CNVA51 🥺😭 June 26, 2025 at 11:39 PM, Szücs Géza FT-B : emty or full now? June 26, 2025 at 11:40 PM, duzzaman Md (MCS) : It shows full in MCS June 27, 2025 at 12:11 AM June 27, 2025 at 12:11 AM, Szücs Géza FT-B : @duzzaman Md (MCS) and now where is LTA0066? 😉😅 June 27, 2025 at 12:13 AM, duzzaman Md (MCS) : Now, its in E0STKA51 0202907 June 27, 2025 at 1:12 AM, 임동현 : Please check the error in the anode roll warehouse #4 June 27, 2025 at 1:25 AM, 방혁 PM(Bang.Hyuk) FA : 메뉴얼 포트 애러로 보이는데 맞을까요? June 27, 2025 at 1:26 AM, duzzaman Md (MCS) : It was in P01, AGV RETRY COUNT EXCEEDED June 27, 2025 at 1:42 AM, 방혁 PM(Bang.Hyuk) FA : Can you make new command for RBA1049? AGV is not good now June 27, 2025 at 1:55 AM, duzzaman Md (MCS) : P01 is OOS again. And please send it manually. June 27, 2025 at 1:57 AM, Böröcz Tamás : Solved June 27, 2025 at 2:27 AM, Viktoriia Hleba : 5 slitter anode nincs Agv. Please check June 27, 2025 at 2:30 AM, duzzaman Md (MCS) : VC17 is on the way June 27, 2025 at 2:33 AM, Viktoriia Hleba : Anod slit 1 nincs AGV 15p June 27, 2025 at 2:35 AM, Nagy Dávid 4 : Help help köszönöm szépen June 27, 2025 at 2:36 AM, duzzaman Md (MCS) : Its on AGV VC24 BUt the transfer is paused at 02:34 June 27, 2025 at 2:36 AM, duzzaman Md (MCS) : @FA PLEASE CHECKING June 27, 2025 at 2:37 AM, Böröcz Tamás : @MCS OK June 27, 2025 at 2:39 AM, Viktoriia Hleba : 5 slitter anode nincs Agv - 22 perc. Please check June 27, 2025 at 2:41 AM, 방혁 PM(Bang.Hyuk) FA : @Böröcz Tamás June 27, 2025 at 2:42 AM, duzzaman Md (MCS) : Also please check VC17, it departed for Slit 5, 20 mins ago June 27, 2025 at 2:44 AM, Szarka Adrián : ?? June 27, 2025 at 2:45 AM, Böröcz Tamás : Ok June 27, 2025 at 2:45 AM, Böröcz Tamás : Elhiszem hogy könnyű szét spamelni a chatet June 27, 2025 at 2:45 AM, Böröcz Tamás : De ha működne a technológia akkor könnyebb lenne June 27, 2025 at 2:46 AM, Szarka Adrián : Ezt mondjuk 2 éve June 27, 2025 at 2:46 AM, Szarka Adrián : 2 éve várunk ra June 27, 2025 at 2:47 AM, Böröcz Tamás : Csak amikor nem tudja az AGV hogy hol van és nem lehet megadni neki mert a program se működik akkor kicsit necc June 27, 2025 at 2:50 AM, Szarka Adrián : Teljesen igazad van. Mert nem jó 2 éve se!! June 27, 2025 at 2:51 AM, Szarka Adrián : Annyi hogy ha látod hogy írtunk és nincs időd vissza írni mert csinálod ezeket a sárga csoda gépeket akkor egy like vagy valami dobj hogy láttad legyezives. Köszi. Mert itt néha a wi-fi is nagy szó és nem tudjuk hogy láttátok e vagy sem. Köszi (thumbsup)(thumbsup)(thumbsup)(thumbsup) June 27, 2025 at 3:00 AM, Böröcz Tamás : Mikor dolgozok nem fogok chatelni. De majd felveszek egy asszisztenst June 27, 2025 at 3:01 AM, Böröcz Tamás : Ha ezen múlik tudok választani a slittről June 27, 2025 at 3:26 AM, Nagy Dávid 4 : Anod slitt 1 20 perce nincsen agv help help köszönöm szépen June 27, 2025 at 3:27 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 27, 2025 at 3:27 AM, Czeilinger Krisztián : @duzzaman Md (MCS) please check. June 27, 2025 at 3:29 AM, Szarka Adrián : Felőlem beszélgethetunk ilyen stílusban is. De egyszerűbb lenne kulturáltan nem mindig ilyen nagyzolva itt írkálni June 27, 2025 at 3:29 AM, Szarka Adrián : Inkább válasz magadnak egy illem könyvet June 27, 2025 at 3:30 AM, duzzaman Md (MCS) : @FA PLEASE CHECK E0STKA31 P01 AND BP01 IT'S OOS DELAYING THE MATERIAL TRANSFER THANK YOU June 27, 2025 at 3:31 AM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_0138 there is Run time error. Thank you June 27, 2025 at 3:34 AM, Czeilinger Krisztián : Az 1 slittre a rollt viszi a 9-es AGV. June 27, 2025 at 3:35 AM, Czeilinger Krisztián : Az 1-es anode slittre a 9-es AGV viszi a rollt. June 27, 2025 at 3:36 AM, 지찬우 : This message was deleted. June 27, 2025 at 3:37 AM, 지찬우 : Cathode slitt 1 2nd Transfer stop check please June 27, 2025 at 3:49 AM, Szarka Adrián : 20 perce lett írva June 27, 2025 at 3:49 AM, Szarka Adrián : Megtudja valaki nézni ? June 27, 2025 at 3:50 AM, Böröcz Tamás : Éppen illem könyvet keresek de persze June 27, 2025 at 3:51 AM, Szarka Adrián : Keress akkor még jó sokáig mert neked kell June 27, 2025 at 3:52 AM, Szarka Adrián : Szerintem le állt a konvejor pálya is mert pirosan világít a liftnel a lámpa katod oldalon June 27, 2025 at 3:54 AM, Böröcz Tamás : Sajnos ez egy nagy család. Nem válogathatod meg a tagjait... De ha nem lenne illemem én is tudnám ecsetelni a hiányosságaid June 27, 2025 at 3:54 AM, Szarka Adrián : Katod Slitt 4 el meg állt egy talca a konvejoron. CV UNIT Inverter Run Timeout error June 27, 2025 at 3:57 AM, Szarka Adrián : El se kellett volna kezdened, akkor mondhattad volna ezt. Mikor mindig normálisan írunk és szólunk nektek, úgy hogy erről ennyit. Ha mi ( operator, Sl, SSL, ) megadja a tiszteletet fordítva is el várom - várjuk. Úgy hogy én itt be is fejeztem. June 27, 2025 at 3:59 AM, 김지수PM(Gyuri)_FA : @eletrode Could you please raise the LR again > E1SLA010_P01 June 27, 2025 at 4:00 AM, 지찬우 : Please.. June 27, 2025 at 4:10 AM, Szarka Adrián : @Szücs Géza FT-B @Böröcz Tamás ha le tiltunk egy agv útvonalat akkor az agv tud magának másik útvonalat hogy el menjen vagy akkor meg áll az agv teljesen a területen ? June 27, 2025 at 4:17 AM, Szücs Géza FT-B : is-is, hol tiltanád, ez attól függ. pl ha tiltjuk az AGVknek, hogy press 5-6 mögött menjenek, akkor ami már a tiltott részen túl van az ki tud jönni, a többi nem tud bemenni hol kellene tiltani? June 27, 2025 at 4:18 AM, Szarka Adrián : Fel hivlak úgy egyszerűbb. Hétvégi takarítás miatt kérdezem. June 27, 2025 at 4:46 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 27, 2025 at 4:59 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián légyszives June 27, 2025 at 5:02 AM, Czeilinger Krisztián : Megyünk June 27, 2025 at 5:38 AM, Viktoriia Hleba : 1 slitter anode r/w robot problema June 27, 2025 at 5:38 AM, Viktoriia Hleba : Please check June 27, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 27, 2025 at 6:13 AM, Somoskövy Martin : Sziasztok. Anode Slitt 1 2-es R/W-en a levevőkar nem megfelelő pozícióba csatlakozott le az Air-Shaft-ről és kiállt hibára. Ránéznétek? Köszönöm. June 27, 2025 at 6:14 AM, Oláh András : Szia June 27, 2025 at 6:14 AM, Oláh András : Igen June 27, 2025 at 6:27 AM, waseem/ Iváncsa Fa : Need help in cathode stk 3 here buffer stuck between as well AGV not working June 27, 2025 at 6:37 AM, waseem/ Iváncsa Fa : Solved June 27, 2025 at 6:38 AM, Dániel Hufnágel : Thank you! June 27, 2025 at 6:38 AM, waseem/ Iváncsa Fa : Wlcm June 27, 2025 at 8:20 AM, Mohammad Amir : Good morning Everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:58 Cathode:05 Slitter 3:- Anode:62 Cathode:00 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:37 Cathode:95 Press 3/4:- Anode:36 Cathode:01 Thank you very much! June 27, 2025 at 9:37 AM, 이게리 : Dear FA Team! Please talk with your new Korean members the Press/Slitt canteen is not their office. Do NOT Move the tables, it is for mealtime not their comfort! Please talk with them immediately!! June 27, 2025 at 9:39 AM, waseem/ Iváncsa Fa : @MCS please check AGV-not coming in cathode coating line 2 both sides June 27, 2025 at 9:40 AM, Sazzad Bhai SKon : There is a job, AGV received the job. Please wait AGV coming June 27, 2025 at 9:42 AM, Oláh András : I removed stale agv, so now others coming to coating ports June 27, 2025 at 9:52 AM, 류종석(RyuJongSeok) : @FA 양극 1라인 1번 리와인더 조치 부탁 드립니다 June 27, 2025 at 9:52 AM, 류종석(RyuJongSeok) : 코팅 입니다 June 27, 2025 at 9:56 AM, JAEYOON KIM / CS : 어떤 현상일까요? June 27, 2025 at 10:16 AM, 배병민 (Bae Byoungmin) : 양극 코터 1라인 1RW 이재기 클램프 전/후진 에러입니다. B터렛에서 크램핑할때 우측 클램프 실린더입니다 우선 테크니션은 리드 센서 위치 조정으로 재기동하였는데 원이 찾아서 재발 방지가 필요합니다 June 27, 2025 at 10:16 AM, 류종석(RyuJongSeok) : 이재기 직동 중 정지되는 현상 이였습니다. 현재는 조치된 상황입니다. June 27, 2025 at 10:18 AM, Lee Junghan(이정한)_CS : 네 제어 인원 보내서 확인하겠습니다. June 27, 2025 at 10:20 AM, Szmrtyka Balázs : Sziasztok Katód Hyundai Press 3-ra egy jóideje már nem érkezik anyag pedig van a raktárban mes szerint, valaki utána tud járni plz? June 27, 2025 at 10:20 AM, Mohammad Amir : Checking June 27, 2025 at 10:22 AM, Somoskövy Martin : Cathode oldalon a conveyor megállt. Ránéznétek? Köszönöm. June 27, 2025 at 10:22 AM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKC31_P01 there is an error from SCS side "Output H/S off" for this Port that's why created job for Press -3 cathode is not progressing. Thank you very much! June 27, 2025 at 10:24 AM, Szabadi Miki : Now it is working June 27, 2025 at 10:24 AM, Mohammad Amir : @Szmrtyka Balázs Due to this issue your witnessing delay,i already informed FA. Currently we have 3 materials available for Cathode Press-3. Thank you very much! June 27, 2025 at 10:24 AM, Szmrtyka Balázs : Thank you! June 27, 2025 at 10:25 AM, Mohammad Amir : You are welcome! June 27, 2025 at 10:30 AM, Mohammad Amir : Update:- AGV#7 on the way with Roll to cathode press-3. ✅ Thank you very much! June 27, 2025 at 10:30 AM, Mohammad Amir : Köszönöm szepen 🙏. June 27, 2025 at 11:59 AM, 류종석(RyuJongSeok) : Please check the 2nd rewinderof the coated cathode line 1. June 27, 2025 at 11:59 AM, Oláh András : We are here👍🏻 June 27, 2025 at 12:30 PM, Hári Zoltàn : Technikust kernek a katod 1 2es rwre! All az agv! Koszi! June 27, 2025 at 12:30 PM, Oláh András : Úton June 27, 2025 at 12:56 PM, Hári Zoltàn : Techmikust lernek az anod 1 1es rw rw! Megallt az agv! Koszi! June 27, 2025 at 12:57 PM, Oláh András : Megyünk June 27, 2025 at 1:23 PM, Hári Zoltàn : Anód 1 2es rw agv problema! Gyertek legyszi! June 27, 2025 at 2:32 PM, Majláth Martin : Sziasztok! Catod press 8 ra várjuk az agv t de nem jön June 27, 2025 at 2:33 PM, Mohammad Amir : Checking. June 27, 2025 at 2:34 PM, Mohammad Amir : Hello, Please press LR we did not receive any LR in recent times that's why AGV is not coming. For your information we have 101 Rolls available for Cathode Press -8. Thank you very much! June 27, 2025 at 2:38 PM, Majláth Martin : Felső tárolón fent van a roll June 27, 2025 at 2:38 PM, 류종석(RyuJongSeok) : 코팅 양극 1라인 2번 리와인더 조치좀 부탁 드립니다. June 27, 2025 at 2:38 PM, Hári Zoltàn : Katod 1 abv problema! Gyertek legyszi! Koszi! June 27, 2025 at 2:39 PM, Hári Zoltàn : Coater June 27, 2025 at 2:40 PM, Szabadi Miki : Szünet és poros tevékenység miatt kell pár perc mire odaérünk June 27, 2025 at 2:40 PM, 류종석(RyuJongSeok) : This message was deleted. June 27, 2025 at 2:42 PM, 류종석(RyuJongSeok) : 코팅 양극 1라인 정지 했습니다. June 27, 2025 at 2:44 PM, KIM SEYEON [김세연]_FA : @Oláh András please check coater line 1 June 27, 2025 at 2:44 PM, KIM SEYEON [김세연]_FA : CA June 27, 2025 at 2:44 PM, Oláh András : We are going to powder load June 27, 2025 at 2:45 PM, Oláh András : @Szabadi Miki will check it June 27, 2025 at 2:50 PM, Dániel Hufnágel invited 카스텔 발라지 F.A.. June 27, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA invited JU YOUNG(정주영) / AGV. June 27, 2025 at 2:52 PM, 서지원 : 24시간 이상 비가동 없이 돌던 설비가 오늘도 이번주 내내 이슈 발생했던 같은 호기 같은 위치 (양극 코터 1라인 2nd R/W )에서 AGV 도착 후 지연 발생했고 공보빈 척킹 불가능으로 설비 정지했습니다. 원인 및 개선대책좀 부탁드리고, 설비에서 주는 신호가 문제가 된다면 알려주세요. 저희가 CS제어 인원분께 요청해서 수정할게요… June 27, 2025 at 2:54 PM, KIM SEYEON [김세연]_FA : 네 원인 파악해보겠습니다. June 27, 2025 at 2:56 PM, 배병민 (Bae Byoungmin) : 네 생산에 차질을 드려 죄송합니다. 해당 문제로 점검 진행을 하였으며, 개선을 위해 현재 일부 AGV에 프로그램 수정/적용하여 data 분석 중입니다. 이후 개선 효과가 있을시 차주 월요일 전호기 AGV 횡전개 예정에 있습니다. 진행 사항은 변경시 업데이트 드리고 모니터링 강화하겠습니다. June 27, 2025 at 3:04 PM, Szabadi Miki : @Mohammad Amir can you check E1PRC080_P02 ? there is a UR but no AGV for it June 27, 2025 at 3:05 PM, Yena Valerii : Hello, pls come to anode press 8 June 27, 2025 at 3:07 PM, Mohammad Amir : Issue has been resolved ✅ Please press UR again. Thank you very much! June 27, 2025 at 3:10 PM, Mohammad Amir : @Szabadi Miki June 27, 2025 at 3:12 PM, Szabadi Miki : a few minutes and I'll do it June 27, 2025 at 3:12 PM, Mohammad Amir : Thank you very much! June 27, 2025 at 3:16 PM, Szabadi Miki : Done June 27, 2025 at 3:17 PM, Mohammad Amir : AGV#9 has successfully assigned now ✅. Thank you very much! June 27, 2025 at 3:17 PM, Szabadi Miki : Thank you June 27, 2025 at 3:17 PM, Mohammad Amir : You are welcome! June 27, 2025 at 3:22 PM, Mohammad Amir : @Szabadi Miki Please check E0CNVC51_08_021 there is Data Loss Error and it is blocking materials recovery. Thank you very much! June 27, 2025 at 3:23 PM, Oláh András : Checking June 27, 2025 at 3:24 PM, Szabadi Miki : Korean technician working on there June 27, 2025 at 3:24 PM, Mohammad Amir : Thank you very much for the confirmation! June 27, 2025 at 3:24 PM, Szabadi Miki : Very welcome June 27, 2025 at 3:44 PM, JAEYOON KIM / CS invited 윤한수 and jung soonhak정순학. June 27, 2025 at 3:58 PM, jung soonhak정순학 invited Park Minho(박민호)_CS, Doohan Jang [장두한]_기구, shinyunhyun/제어/시너스텍, SungKwun/(조성관)/AGV, RYUKYUNGMIN(류경민)_AGV, HONG SUK DO[홍석도] 제어 and 김용성. June 27, 2025 at 4:07 PM, Kozma István : Gyertek légyszi az anódos jumbóraktárba, AGV probléma June 27, 2025 at 4:07 PM, Kiss Balázs F.A. : Megyek June 27, 2025 at 5:46 PM, Farkas Dániel Elekt : Coating kat 1 avg problema June 27, 2025 at 5:46 PM, Farkas Dániel Elekt : Gyertek legyszi June 27, 2025 at 5:47 PM, Viczai Tamás : Megyek June 27, 2025 at 7:24 PM, Baek Hojong(백호종)FA : Night shift FA Schedule Date: 2025.06.27 Time:18:00~06:00 FA 백호종 (Baek Hojong) GF Assy Ca 최명운 (CHOI Myoungwoon) GF Assy An 김정희 (Kim jeong hul) June 27, 2025 at 10:39 PM, na1tis : Hello!) Problem AGV R/W,cathode press 2 June 27, 2025 at 10:42 PM, Viczai Tamás : Kész June 27, 2025 at 11:24 PM, 임동현 : Cathode press 3 Please check the L/R June 27, 2025 at 11:26 PM, VK (mcs) : AGV # 1 is on the way June 28, 2025 at 2:46 AM June 28, 2025 at 2:46 AM, Pintér Gábor : Anód 1 coating mindketto rw nel megallt az egv June 28, 2025 at 2:46 AM, Pintér Gábor : Agv June 28, 2025 at 2:48 AM, Baek Hojong(백호종)FA : @Simon Attila F. A. Check plz June 28, 2025 at 2:52 AM, Simon Attila F. A. : Worki g. June 28, 2025 at 3:37 AM, VK (mcs) : @FA Can you please redirect some of full trays to E0STKA51 in anode reel conveyor, There is almost no more space in conveyor. Thx June 28, 2025 at 3:39 AM, Viczai Tamás : Ok June 28, 2025 at 4:36 AM, Czél Tamás : Sziasztok Katód Slitt 1-ről nem viszi el a robot az anyagot. Kérlek nézzetek rá Köszönöm June 28, 2025 at 4:36 AM, Viczai Tamás : Megyek June 28, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor June 28, 2025 at 6:21 AM, Hári Zoltàn : This message was deleted. June 28, 2025 at 6:21 AM, Oláh András : Megyünk szaladunk June 28, 2025 at 6:29 AM, Hári Zoltàn : Bocsi vaklárma volt! June 28, 2025 at 6:30 AM, Oláh András : Hallottam hogy mérgesen ránéztél és már jól is állt be 😅 June 28, 2025 at 6:32 AM, Mohammad Amir : @Oláh András Good morning, Please check E0CNVC51_08011 there is INV-01 Runtime Over error and it is blocking materials recovery. Thank you very much! June 28, 2025 at 6:32 AM, Oláh András : Checking June 28, 2025 at 6:32 AM, Oláh András : Good morning! June 28, 2025 at 6:36 AM, Mohammad Amir : Good morning Everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:92 Cathode:05 Slitter 3:- Anode:49 Cathode:02 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:03 Cathode:02 Press 3/4:- Anode:36 Cathode:51 Thank you very much! June 28, 2025 at 6:51 AM, Mohammad Amir : @Oláh András Good morning, Please check E0CNVC51_08054/53 there is INV-01 Runtime Over error and it is blocking materials recovery. Thank you very much! June 28, 2025 at 6:52 AM, Oláh András : Checking June 28, 2025 at 7:05 AM, Szarka Adrián : Sziasztok June 28, 2025 at 7:06 AM, Szarka Adrián : Katod Press 2 gyertek legyszi nem viszi el az agv a kész roll June 28, 2025 at 7:06 AM, Mohammad Amir : Checking June 28, 2025 at 7:06 AM, Szarka Adrián : Gép áll mert a következő anyagot nem tudjuk ki fordítani. June 28, 2025 at 7:06 AM, Szarka Adrián : Köszönöm szépen June 28, 2025 at 7:07 AM, Szabadi Miki : Uton van az AGV#1 June 28, 2025 at 7:08 AM, Mohammad Amir : This message was deleted. June 28, 2025 at 7:12 AM, Mohammad Amir : Hello, AGV #1 has started to move now. You witnessed delay because since 6:50 There was issue from ACS side and AGVs were getting assigned and unassigned. 6:50 -AGV#13 assigned and unassigned. 6:58 AGV#16 assigned and unassigned. 6:59 AGV#13 assigned and unassigned. 7:02 AGV#14 assigned and unassigned. Finally at 7:07 ,AGV#1 assigned and now doing the task. Thank you very much! June 28, 2025 at 7:24 AM, Oláh András : As we see in replay. If AGV come between press2 and press5 drop the order. June 28, 2025 at 7:33 AM, Mohammad Amir : @Oláh András Please check E0STKC13_C01 Hoist Driver Error. Thank you very much! June 28, 2025 at 8:09 AM, Farkas Dániel Elekt : Sziasztok Anod 1 megalt az agv June 28, 2025 at 8:15 AM, Szabadi Miki : Megyek June 28, 2025 at 8:47 AM, Szarka Adrián : @Szabadi Miki katod Press 7 re gyertek legyszi June 28, 2025 at 8:47 AM, Szabadi Miki : Megyek June 28, 2025 at 8:47 AM, Szarka Adrián : Szét hullott a ZAR szerkezet és nem tudjuk be kapcsolni a robotot mert nincs zár June 28, 2025 at 9:05 AM, Szarka Adrián : Katod oldalon elkezdünk fel mosni. Így ki fogunk kapcsolni pár AGV -t mindig. Ezeket majd vissza kapcsoljuk mi mikor kész a terület June 28, 2025 at 9:06 AM, Dániel Hufnágel : Jó reggelt June 28, 2025 at 9:08 AM, Dániel Hufnágel : Kérek szépen minden termelési részlegben dolgozót, ha esetlegesen ilyen történik önkényesen ne kapcsolatok ki egy FA-s gépet sem! Kérlek benneteket, ha bármiféle kérdés/kérés merül fel, először minket értesítsetek, és az ilyenek legyenek előre leegyeztetve June 28, 2025 at 9:08 AM, Dániel Hufnágel : Egyenlőre nincs egy AGV lekapcsolása sem! June 28, 2025 at 9:22 AM, Turianytsia Olesia : Elakadt AGV Anode slitt 1 June 28, 2025 at 9:23 AM, Yena Valerii : Hello, pls come to cathode press 1 June 28, 2025 at 9:25 AM, Oláh András : Coming June 28, 2025 at 9:27 AM, Szarka Adrián : Katod roll raktarhoz szeretnék segítséget kérni June 28, 2025 at 9:27 AM, Szarka Adrián : Agv megállt June 28, 2025 at 9:27 AM, Oláh András : Megyunk oda is mindjárt June 28, 2025 at 9:30 AM, Farkas Dániel Elekt : Kat1 agv megallt June 28, 2025 at 9:30 AM, Farkas Dániel Elekt : Gyertek legyszi June 28, 2025 at 9:33 AM, Oláh András : Megyek June 28, 2025 at 9:34 AM, Semenszki Péter : Sziasztok! A fólia raktárt újra tudnátok indítani? June 28, 2025 at 9:34 AM, Oláh András : Természetesen June 28, 2025 at 9:34 AM, Semenszki Péter : Köszi June 28, 2025 at 9:48 AM, 장정훈 : @FA Please check the cathode reel conveyor! June 28, 2025 at 9:49 AM, Oláh András : Checking June 28, 2025 at 9:50 AM, Yena Valerii : Cathode conveyor stopped, please check it June 28, 2025 at 9:50 AM, Oláh András : 👍🏻 June 28, 2025 at 10:20 AM, Yena Valerii : pls, come ta cathode press 7, agv does not take finished material June 28, 2025 at 10:24 AM, Szabadi Miki : Agv#12 on the way June 28, 2025 at 10:37 AM, Mohammad Amir : @Oláh András Please check E0CNVC51_0821/43 there is Port interface error and it has blocked materials recovery. Thank you very much! June 28, 2025 at 10:43 AM, Szabadi Miki : Done June 28, 2025 at 10:43 AM, Mohammad Amir : Thank you very much! June 28, 2025 at 11:12 AM, Mohammad Amir : @Szabadi Miki Please check and confirm E0STKA52 _P02 and it is in Manual mode hence OOS and because of this empty trays delivery has stopped. Also,E0CNVA51_P04 it is in Manuallfe as well and it is blocking materials recovery. Thank you very much! June 28, 2025 at 11:16 AM, Oláh András : Checking June 28, 2025 at 11:21 AM, Mohammad Amir : @Oláh András Please check As well ,E0CNV51_08_043 it has port interface error and CA Empty trays delivery has stopped. Thank you very much! June 28, 2025 at 11:22 AM, Mohammad Amir : And 8047 location has data Mismatch error. Thank you very much! June 28, 2025 at 11:22 AM, Oláh András : I see checking June 28, 2025 at 11:25 AM, Turianytsia Olesia : Nincsenek tálcák Anode slitt 2-3 June 28, 2025 at 11:26 AM, Turianytsia Olesia : A szállítószalag megállt. Anode slitt June 28, 2025 at 11:26 AM, Mohammad Amir : @Turianytsia Olesia Because of this issue there is no Anode empty trays i already informed the FA team. Thank you very much! June 28, 2025 at 11:26 AM, Oláh András : Somebody work there we will investigate it June 28, 2025 at 11:31 AM, Mohammad Amir : Could you please also check why E0STKA51_P04 is also in manual mode ,it is also blocking empty trays delivery. Thank you very much! June 28, 2025 at 11:41 AM, Nagy Dávid 4 : Katod oldalon konvejor megált help help köszönöm szépen June 28, 2025 at 11:46 AM, Oláh András : Rajta vagyunk June 28, 2025 at 11:50 AM, Oláh András : Újra megy👍🏻 kis türelem míg rendeződnek a dolgok June 28, 2025 at 11:51 AM, Mohammad Amir : Now issue resolved ✅. And empty trays on the way. Thank you very much! June 28, 2025 at 12:08 PM, Mohammad Amir : @Oláh András Please check As well ,E0CNV51_08_043 it has port interface error and CA Empty trays delivery has stopped. Thank you very much! June 28, 2025 at 12:27 PM, Kozma István : Anód 1 1 rw agv probléma June 28, 2025 at 12:28 PM, Szabadi Miki : Coating , press , slitt ? June 28, 2025 at 12:28 PM, Kozma István : Coating June 28, 2025 at 12:28 PM, Szabadi Miki : Oké megyünk June 28, 2025 at 12:28 PM, Oláh András : Megyünk June 28, 2025 at 12:29 PM, 제범 : This message was deleted. June 28, 2025 at 12:35 PM, Szarka Adrián : @Szabadi Miki szia merre vagy ? June 28, 2025 at 12:39 PM, Szabadi Miki : Katod cv sarokban June 28, 2025 at 12:39 PM, Szarka Adrián : 5 perc és kereslek, takarítás folytatás miatt. June 28, 2025 at 12:40 PM, Szabadi Miki : Okés addigra szerintem an slitt 1 mellett leszünk helyünknél June 28, 2025 at 1:13 PM, Mohammad Amir : @Szabadi Miki Please check CA Slitter CNV ,is there any maintenance going on? Empty trays delivery has stopped. Thank you very much! June 28, 2025 at 1:15 PM, Szabadi Miki : Checking June 28, 2025 at 1:16 PM, Szabadi Miki : it works fine but it is full of empty tray June 28, 2025 at 1:18 PM, Mohammad Amir : It just came in service before it was OOS since 13:08. That's why I reported. Thank you very much! June 28, 2025 at 1:30 PM, Nagy Dávid 4 : Anod press 1 U/W 17 számú agv kiált hibára help help köszönöm szépen June 28, 2025 at 1:45 PM, Mohammad Amir : @FA @Szabadi Miki Please investigate these two ports E0CNVC51_08_043 and 021. Since last four years this is the history of downtime :- 9:41-9:45 -OOS. 9:59-10:02-OOS. 10:07-10:07-OOS. 10:34-10:42-OOS. 11:15-11:26 -OOS. 11:27-11:32-OOS. 11:36-11:40-OOS. 11:44-11:48-OOS. 12:07-12:14.-OOS. 13:08-13:13-OOS. 13:24--OOS. Majorly "Port interface error 1" occured in both ports. While 08043-stops empty trays delivery and 08021-stops materials recovery. Please investigate these ports. June 28, 2025 at 2:05 PM, Nagy Dávid 4 : Katod oldalon a 12 számú agv útban van el tudnátok küldeni help help köszönöm szépen June 28, 2025 at 2:06 PM, Oláh András : Parqncsolj June 28, 2025 at 2:06 PM, Nagy Dávid 4 : Köszönöm szépen (thumbsup) June 28, 2025 at 2:47 PM, Szarka Adrián : Katod Press en a 13 számú agv küldjétek el kerlek a raktár felé June 28, 2025 at 2:50 PM, Oláh András : Kis türelmet, még a slitt cv-t igazítjuk June 28, 2025 at 3:02 PM, Hári Zoltàn : Techmikus kene a katod 1 2es rw re! Koszi! June 28, 2025 at 3:03 PM, Oláh András : Jövök June 28, 2025 at 3:03 PM, Hári Zoltàn : Valszeg az a gond h Nincs alaphelyzetben az unloader es ezert nem veszi le a rollt June 28, 2025 at 3:12 PM, Oláh András : Catod slitt cv elindult 👍🏻 June 28, 2025 at 3:34 PM, Mohammad Amir : @Szabadi Miki Please check E0CNVC51 it is in manual mode. Thank you very much! June 28, 2025 at 4:20 PM, Nagy Dávid 4 : Katod press 1- re nem megy anyag rá tudnátok nézni légyszíves köszönöm szépen June 28, 2025 at 4:21 PM, Mohammad Amir : @Szabadi Miki Please check STK33_C01 it is inactive that's why job for Cathode press-1 is getting delayed. Thank you very much! June 28, 2025 at 4:24 PM, Szabadi Miki : Done June 28, 2025 at 4:24 PM, Mohammad Amir : Thank you very much! June 28, 2025 at 4:28 PM, Szarka Adrián : Katod pressen 3 nal 1 számú agv ki állt hibára a töltő mellett June 28, 2025 at 4:28 PM, Szarka Adrián : Nézzetek meg kerlek June 28, 2025 at 4:29 PM, Mohammad Amir : Update:- Now AGV#1 on the way to Cathode Press -1 ✅. I am monitoring. Thank you very much! June 28, 2025 at 4:30 PM, Mohammad Amir : @Szabadi Miki For your information! Thank you very much! June 28, 2025 at 6:31 PM, 김태현 : @KIM SEYEON [김세연]_FA 안녕하세요 방 인원좀 늘려주실수있나요? June 28, 2025 at 6:32 PM, KIM SEYEON [김세연]_FA : 초대가 안되시나요? June 28, 2025 at 6:32 PM, 김태현 : 네.. June 28, 2025 at 6:33 PM, 심재윤 invited 정대현. June 28, 2025 at 6:33 PM, 심재윤 : . June 28, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : 어떻게 늘리는지 찾아보겠습니다. June 28, 2025 at 6:38 PM, KIM SEYEON [김세연]_FA : 초대 되나요? June 28, 2025 at 6:38 PM, 고병식 has been removed from this chatroom. June 28, 2025 at 6:38 PM, yoonjucheol has been removed from this chatroom. June 28, 2025 at 6:39 PM, 김동환 has been removed from this chatroom. June 28, 2025 at 6:40 PM, KIM SEYEON [김세연]_FA : 우선 초대 다시 해보시겠어요? June 28, 2025 at 6:49 PM, 지찬우 : Anode slitt1 AGV Error check please June 28, 2025 at 6:49 PM, Viczai Tamás : Megyek June 28, 2025 at 6:49 PM, 오승주 : 넵 감사합니다 June 28, 2025 at 6:51 PM, Czél Tamás : Sziasztok Anód slitt 1-en megállt egy szekér. Kérlek nézzétek meg. Köszönöm June 28, 2025 at 7:35 PM, Bks.Gabor : Sziasztok! Az Anod Press 1-es géphez tudtok jönni? AVG probléma van.kosziii June 28, 2025 at 7:36 PM, Viczai Tamás : Megyek June 28, 2025 at 7:47 PM, Simon Attila F. A. : Kész. June 28, 2025 at 8:12 PM, VK (mcs) : @FA Please check Cathode Reel conveyor C51 (8021) LTC0416 is not moving. June 28, 2025 at 8:21 PM, Viczai Tamás : Megyek June 28, 2025 at 8:22 PM, FACS_Bareum kim left this chatroom. June 28, 2025 at 8:41 PM, Czél Tamás : Sziasztok A Katód oldali konveyor meghalt. Közve az az 1-es daru hibához? June 28, 2025 at 8:42 PM, Viczai Tamás : Már megy. June 28, 2025 at 8:42 PM, Viczai Tamás : Kettes lifttel van probléma. June 28, 2025 at 9:09 PM, Czél Tamás : Sziasztok Anód Press 7 RW-re nem talál pozíciót az AGV. Kérlek nézzétek meg Köszönöm June 28, 2025 at 9:10 PM, Bks.Gabor : Az Anod Press 1-es és 2-es gépre nem hoz anyagot az AGV. Megtudnátok nézni,kosziii June 28, 2025 at 9:12 PM, VK (mcs) : @FA Please check Anode roll STK A32 Output H/S off. June 28, 2025 at 9:12 PM, Simon Attila F. A. : I check. June 28, 2025 at 9:14 PM, Czél Tamás : Illetve Anód konveyor is leparkolt a Slitt 3-nál June 28, 2025 at 9:14 PM, 지찬우 : Anode press 7 RW AGV Error check please June 28, 2025 at 9:15 PM, Viczai Tamás : Katod slitt 4 nél vagyok! June 28, 2025 at 9:15 PM, Simon Attila F. A. : Now working! June 28, 2025 at 9:16 PM, Simon Attila F. A. : Megyek anód slit 3ra. June 28, 2025 at 9:17 PM, Simon Attila F. A. : Working. June 28, 2025 at 9:18 PM, 지찬우 : Why aren't materials coming into Anode press 1,2? June 28, 2025 at 9:18 PM, 지찬우 : This message was deleted. June 28, 2025 at 9:19 PM, VK (mcs) : There was an issue in STK A32, it has been solved. Materials are on the way June 28, 2025 at 9:22 PM, Simon Attila F. A. : Működik! June 28, 2025 at 9:27 PM, Czél Tamás : Köszönöm June 28, 2025 at 9:47 PM, 지찬우 : Cathode press 1 RW AGV Error check please June 28, 2025 at 9:47 PM, Simon Attila F. A. : Jövök... June 28, 2025 at 11:15 PM, 임동현 : Cathode sliter 2nd floor conveyor problem caused tray to stop June 28, 2025 at 11:16 PM, Viczai Tamás : Megyek June 28, 2025 at 11:56 PM, 임동현 : Cathode slitt 2.4 conveyor not working June 29, 2025 at 12:03 AM June 29, 2025 at 12:03 AM, VK (mcs) : @FA Anode reel conveyor A51 It is almost occupied with full of trays please redirect some of them to the E0STKA51. June 29, 2025 at 12:20 AM, Simon Attila F. A. : @Czél Tamás a ca slit4re mindjárt megy a várt anyag. AGV hiba miatt késik sajnos. June 29, 2025 at 12:21 AM, Czél Tamás : Rendben, köszi az infot June 29, 2025 at 2:02 AM, 지찬우 : @Baek Hojong(백호종)FA 양극프레스 1호기 RW AGV 3번째 시도중인데 확인 부탁드립니다 June 29, 2025 at 2:05 AM, Baek Hojong(백호종)FA : This message was deleted. June 29, 2025 at 2:05 AM, Baek Hojong(백호종)FA : @Simon Attila F. A. Please check Ca Press #1 RW AGV Retry and tell me which AGV it is. June 29, 2025 at 2:05 AM, Simon Attila F. A. : Ok. June 29, 2025 at 2:11 AM, Simon Attila F. A. : I check next AGV. June 29, 2025 at 3:05 AM, 임동현 : Cathode slit tray does not come out June 29, 2025 at 3:29 AM, Czél Tamás : Anód oldalon nagyon lassan jönnek a reel tálcák. Tudjuk esetleg az okot? June 29, 2025 at 3:30 AM, Viczai Tamás : Sajnos ennyit tud a raktár. June 29, 2025 at 3:31 AM, Viczai Tamás : Catodon is ez volt,ott most rendesen jönnek. June 29, 2025 at 3:38 AM, Czél Tamás : Ez mondjuk nem sok 🤣🤣 June 29, 2025 at 6:03 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Zsurbej Zsolt Modul(2): Nagy Gábor, Martina Dávid Hun Operators (2): Gombos Csaba Nagypál Gábor June 29, 2025 at 6:16 AM, duzzaman Md (MCS) : @FA @Oláh András Good morning ! Please check E0STKA35_P01 It's OOS. AGV RETRY count exceeded. Thanks ! June 29, 2025 at 6:17 AM, Oláh András : Checking June 29, 2025 at 6:20 AM, Hári Zoltàn : Szevasztok! Anod5 roll raktarban all az agv! Nezzetek ra legyszi! Koszi! June 29, 2025 at 6:21 AM, Oláh András : Jövünk már June 29, 2025 at 6:45 AM, Kozma István : Coating anód 1 hez kérnék segítséget June 29, 2025 at 6:46 AM, Kozma István : Agv probléma 2rw June 29, 2025 at 6:47 AM, Kozma István : SOS June 29, 2025 at 6:48 AM, Oláh András : Megyünk June 29, 2025 at 7:11 AM, Hári Zoltàn : Anod 4 roll raktarat nezzetek meg legyszi! Köszi! June 29, 2025 at 7:12 AM, Hári Zoltàn : Na jó.... Amint beírtam megszünt a jelenség :D Majd elmesélem mi volt :) June 29, 2025 at 7:13 AM, Oláh András : Már megint mérgesen néztél rá 😅😁 June 29, 2025 at 7:14 AM, Hári Zoltàn : Szóljatok ha kellek... (crackup) June 29, 2025 at 7:21 AM, Kozma István : Sziasztok, a katód2 elakadt 1 AGV June 29, 2025 at 7:21 AM, Oláh András : Itt is vagyok June 29, 2025 at 7:57 AM, Yena Valerii : Hello, pls check what happened on anode press 7-8 with AGV June 29, 2025 at 8:02 AM, ~Lidiia~리디 ~ : @FA Hello, there was an error on slitt 4 cathode with the transfer that installs the coils from AGV to U/W. Please check this. Thank you! June 29, 2025 at 8:03 AM, Kiss Balázs F.A. : Coming June 29, 2025 at 8:07 AM, duzzaman Md (MCS) : @FA PLEASE CHECK THE E0CNVC51 PORTS P01/02/03/04/05/06, Also the OP ports. All OOS. THANKS! June 29, 2025 at 8:10 AM, Nagy Dávid 4 : Anod konvejor megált help help köszönöm szépen June 29, 2025 at 8:12 AM, Nagy Dávid 4 : Anod press 7 U/W 18 SZÁMÚ AGV KIÁLT HIBÁRA HELP HELP KÖSZÖNÖM SZÉPEN June 29, 2025 at 8:13 AM, ~Lidiia~리디 ~ : Cathode slitt 1 on side 2 ST R/W no tray ID, transver can't pick up coil. Please check this. Thank you! June 29, 2025 at 8:17 AM, Kiss Balázs F.A. : Nézünk mindent June 29, 2025 at 9:03 AM, Yena Valerii : pls move AGV 25 on anode side June 29, 2025 at 9:04 AM, Oláh András : 👍🏻 June 29, 2025 at 10:45 AM, Kozma István : Coating anód 1 hez kérnék segítséget June 29, 2025 at 10:45 AM, Kiss Balázs F.A. : Úton June 29, 2025 at 10:51 AM, ~Lidiia~리디 ~ : The transfer problem is still not solved on slitt 1 cathode. Please check this. Thank you! June 29, 2025 at 11:00 AM, Turianytsia Olesia : A szállítószalag elakadt Anode Slitt 1 June 29, 2025 at 11:09 AM, Kiss Balázs F.A. : Megyünk June 29, 2025 at 11:15 AM, Kozma István : Használhatjuk az AGV t a Coating anód 1 en? June 29, 2025 at 11:17 AM, Dániel Hufnágel : Természetesen June 29, 2025 at 11:29 AM, Csicskovics Balázs : Sziasztok. Elég sok állásidőnk van a cathode slitt 1-nél lévő transfer hiba miatt. Senki nem érkezett még mindig, hogy megnézze mi a probléma. Gyertek légyszíves Köszönöm June 29, 2025 at 11:54 AM, ~Lidiia~리디 ~ : Cathode slitt 4 has a problem on the conveyor. Please check this. Thank you! June 29, 2025 at 12:02 PM, 류종석(RyuJongSeok) : coater Anode 1 2ndRW June 29, 2025 at 12:03 PM, 류종석(RyuJongSeok) : If it is not resolved, the line is expected to stop in 10 minutes. June 29, 2025 at 12:03 PM, 박정근(Park) : pls help Anode 1Line Re-2 June 29, 2025 at 12:03 PM, Oláh András : Coming June 29, 2025 at 12:11 PM, Szabadi Miki : Kész June 29, 2025 at 12:19 PM, Szabadi Miki : Solved June 29, 2025 at 12:31 PM, duzzaman Md (MCS) : @FA PLEASE CHECK E0CNVC51_08_049 INV-01 RUNTIME OVER June 29, 2025 at 1:34 PM, Kozma István : Coating Anód jumbóraktárba kérnék szépen segítséget June 29, 2025 at 1:35 PM, Kiss Balázs F.A. : 5p June 29, 2025 at 2:14 PM, duzzaman Md (MCS) : @FA Please check E0STKC34_P01 IPS Sensor reading fails. Thank you June 29, 2025 at 2:15 PM, Kiss Balázs F.A. : Okey June 29, 2025 at 2:17 PM, Kozma István : Coating catod jumbóraktárba kérnék szépen segítséget June 29, 2025 at 2:44 PM, Nagy Dávid 4 : Anod slitt 3 47 perce nem viszi az anyagot az agv rá tudnátok nézni légyszíves köszönöm szépen June 29, 2025 at 2:45 PM, Kiss Balázs F.A. : Valószínű a takarítás miatt csúszik, de ránézünk June 29, 2025 at 2:45 PM, Nagy Dávid 4 : Köszönöm szépen June 29, 2025 at 2:51 PM, Kiss Balázs F.A. : Elvileg megy, kis időbe tellik June 29, 2025 at 2:51 PM, Kiss Balázs F.A. : Most vette fel June 29, 2025 at 2:52 PM, Nagy Dávid 4 : Nagyon szépen köszönöm a segítséget (thumbsup) June 29, 2025 at 2:52 PM, Kiss Balázs F.A. : Szívesen June 29, 2025 at 3:35 PM, ~Lidiia~리디 ~ : @FA An error occurred with the tray movement on slitt cathode 4. Please check this, thank you. June 29, 2025 at 3:36 PM, Szabadi Miki : This message was deleted. June 29, 2025 at 3:36 PM, Szabadi Miki : Comin June 29, 2025 at 4:48 PM, Turianytsia Olesia : A szállítószalag elakadt Anode Slitt 1-3 June 29, 2025 at 4:50 PM, Nagy Dávid 4 : Anod slitt 1 agv 25 kiált hibára help help köszönöm szépen June 29, 2025 at 4:52 PM, Yena Valerii : pls, come to anode press 7, R/W June 29, 2025 at 4:56 PM, Nagy Dávid 4 : Done June 29, 2025 at 5:31 PM, Hári Zoltàn : Anod roll raktarhoz gyertek legyszi! All az egyik agv, nem viszi el a rollt a raktarbol! Koszi! June 29, 2025 at 5:47 PM, K.Krisz Coating : An 1 1 rw agv várunk,sürgös June 29, 2025 at 7:08 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_049/50 there is INV-01 Run Time over error. Thank you June 29, 2025 at 11:16 PM, Oláh Rajmund : Sziasztok, Anode press 2-es gépre 30 perce nem jön anyag Nézétek meg kérlek. June 29, 2025 at 11:17 PM, Simon Attila F. A. : Rajta vagyok. Agv probléma van. June 29, 2025 at 11:19 PM, Shakir (MCS) : AGV01 assigned but occurring error. June 29, 2025 at 11:20 PM, Simon Attila F. A. : Pár perc és ott van az anyag. June 29, 2025 at 11:20 PM, Simon Attila F. A. : Now working. June 30, 2025 at 12:40 AM June 30, 2025 at 12:40 AM, Czél Tamás : Sziasztok Katód Slitt 3-nál megállt a konveyor. Kérlek nézzetek rá. Köszönöm June 30, 2025 at 12:40 AM, Viczai Tamás : Mindjárt megyek! June 30, 2025 at 3:37 AM, Zsmenyák György : Sziasztok katód press 7 kérnék segítséget R/W probléma June 30, 2025 at 3:38 AM, Viczai Tamás : Jövök June 30, 2025 at 4:16 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_045 it has port interface error. Thank you June 30, 2025 at 4:17 AM, Viczai Tamás : Itt vagyok. June 30, 2025 at 5:02 AM, Zsmenyák György : Sziasztok katód press 7 AGV nem viszi az anyagot a R/W erről June 30, 2025 at 5:03 AM, Simon Attila F. A. : Érkezik az AGV. June 30, 2025 at 5:20 AM, Zsmenyák György : Katód press 7 AGV probléma June 30, 2025 at 5:21 AM, Simon Attila F. A. : Megyünk. June 30, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.30. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(0): Sick(0): Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dánie --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Csanálosi Gábor NC OP(2): Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ------- June 30, 2025 at 6:06 AM, Szarka Adrián : Jó reggelt June 30, 2025 at 6:07 AM, Szarka Adrián : Coating anod oldalon szeretnénk segítséget kérni. Takarítani szeretnénk June 30, 2025 at 6:25 AM, Viktor Vadas : Sziasztok! Coatingon Anod 1 Katod 1 termel! Mindket sorra hasznalunk AGV-t! June 30, 2025 at 7:29 AM, 장정훈 : @FA Error 121 on the Cahode reel conveyor. Check it out! June 30, 2025 at 7:34 AM, Rácz Dániel / FA : We are here June 30, 2025 at 7:35 AM, Dana Honak : Cathode slitt 1 Nincs a távirányítón szám tálca ! June 30, 2025 at 7:54 AM, Szücs Géza FT-B : CA Slitt CV pár percre meg fog állni szíjcsere miatt June 30, 2025 at 8:19 AM, Böröcz Tamás : Elindult June 30, 2025 at 8:34 AM, Anton Mashchenko : Come to cathode press 7, AGV 13 position error! R/W! June 30, 2025 at 8:36 AM, Czeilinger Krisztián : Csináljuk. June 30, 2025 at 8:40 AM, Czeilinger Krisztián : Kesz. June 30, 2025 at 8:57 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. June 30, 2025 at 9:02 AM, Böröcz Tamás : Már itt voltam June 30, 2025 at 9:06 AM, Anton Mashchenko : Cathode press 7, AGV 12 position error! Help! June 30, 2025 at 9:10 AM, Anton Mashchenko : Help! Help! June 30, 2025 at 9:15 AM, Szücs Géza FT-B : @Rácz Dániel / FA légyszives June 30, 2025 at 9:18 AM, Nagy Dávid 4 : Anod slit 1 nincs AGV 15p help köszönöm szépen June 30, 2025 at 9:18 AM, Mohammad Amir : AGV#7 on the way. Thank you! June 30, 2025 at 9:19 AM, Rácz Dániel / FA : Itt vagyunk June 30, 2025 at 9:36 AM, Dana Honak : 1slitt cathode r/w robot probléma Nem tudjuk elküldeni rell June 30, 2025 at 9:42 AM, Dana Honak : ! June 30, 2025 at 9:48 AM, 김건희 : Please check agv14 it is stopped June 30, 2025 at 9:55 AM, Rácz Dániel / FA : Anode or Cathode ? June 30, 2025 at 9:56 AM, 김건희 : Cathode June 30, 2025 at 9:58 AM, Rácz Dániel / FA : No error, the AGV move June 30, 2025 at 11:37 AM, Dana Honak : Cathode slitt 1 15 perc ninc AGV June 30, 2025 at 11:38 AM, Mohammad Amir : Unfortunately there is no material available. As soon as material will be available jobs will be created as we have an active LR. Thank you very much! June 30, 2025 at 11:38 AM, Czeilinger Krisztián : @Mohammad Amir Amir please check. June 30, 2025 at 11:38 AM, Mohammad Amir : Unfortunately there is no material available. As soon as material will be available jobs will be created as we have an active LR. Thank you very much! June 30, 2025 at 11:39 AM, Czeilinger Krisztián : Thank you very much (thumbsup) June 30, 2025 at 11:41 AM, Mohammad Amir : You are welcome! June 30, 2025 at 12:11 PM, Mohammad Amir : @FA Please check E0CNVA51_06013/14 there is INV-01 Runtime Over error and it is blocking materials recovery. Thank you very much! June 30, 2025 at 12:12 PM, Nagy Dávid 4 : Anod slitt conveer stop help help köszönöm szépen June 30, 2025 at 12:12 PM, Viktoriia Hleba : Anod slitt conveer stop June 30, 2025 at 12:12 PM, Rácz Dániel / FA : Megyünk June 30, 2025 at 12:12 PM, Mohammad Amir : @Viktoriia Hleba @Nagy Dávid 4 Because of this error anode Slitter CNV stopped,I already informed the FA. Thank you very much! June 30, 2025 at 1:49 PM, Nagy Dávid 4 : Anod press 1 R/W robot probléma help help köszönöm szépen June 30, 2025 at 5:24 PM, Nagy Dávid 4 : Anod slitt2 nincs talca help help köszönöm szépen June 30, 2025 at 5:25 PM, Czeilinger Krisztián : @Mohammad Amir Please checking Amir. June 30, 2025 at 5:26 PM, Mohammad Amir : Please check LTA0625 located E0CNVA51_06_034 it is not moving and blocking empty trays delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! June 30, 2025 at 5:26 PM, Mohammad Amir : @Nagy Dávid 4 This is the issue. Thank you very much! June 30, 2025 at 5:29 PM, Czeilinger Krisztián : Thank you @Amir MCS for looking at it. June 30, 2025 at 5:30 PM, Mohammad Amir : You are welcome! June 30, 2025 at 6:07 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_034 is OOS, Blocked all empty trays Thank you June 30, 2025 at 6:12 PM, 김대호 (Kim Dae Ho) : Please check Cathode Roll Warehouse 2 @fa June 30, 2025 at 6:13 PM, Shakir (MCS) : Solved June 30, 2025 at 6:15 PM, Shakir (MCS) : @FA Please check AGV02 CA under alarm. Thanks June 30, 2025 at 6:15 PM, Mr.Miti (미티) FA : Checking! June 30, 2025 at 6:22 PM, Shakir (MCS) : @FA Please check Foil STK002, Travel driver error. Thank you June 30, 2025 at 6:22 PM, Mr.Miti (미티) FA : Done June 30, 2025 at 6:25 PM, 김태현 : @Fa Please check the cathode 1 Agv. June 30, 2025 at 6:31 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 30, 2025 at 6:57 PM, Vörös Geri : Katód slitt 2 nél kiált hibára a conveyor megnéznétek.köszi June 30, 2025 at 7:28 PM, Margaret : Hello .anode nincs tray . Please check June 30, 2025 at 7:29 PM, Shakir (MCS) : @FA Please check track E0CNVA51_06_034 Thank you June 30, 2025 at 7:30 PM, gutenkunstabelzoltan : Kesz June 30, 2025 at 7:48 PM, Margaret : anode slitt 5 problem with the transfer . Please check June 30, 2025 at 8:50 PM, 김대호 (Kim Dae Ho) : Did the Anode 2f conveyor stop? Is it slow? June 30, 2025 at 8:51 PM, Mr.Miti (미티) FA : Slow June 30, 2025 at 8:52 PM, 김대호 (Kim Dae Ho) : Is there any way? June 30, 2025 at 8:52 PM, Mr.Miti (미티) FA : I'll redirect the trays to the other warehouse. June 30, 2025 at 8:55 PM, Karina Lyzanets invited Anastasiia~~. June 30, 2025 at 8:56 PM, 김대호 (Kim Dae Ho) : Thank you June 30, 2025 at 8:56 PM, Margaret : Anod the conveyor stopped June 30, 2025 at 9:00 PM, Mr.Miti (미티) FA : Solve D June 30, 2025 at 9:00 PM, cehmannzsoltcehmann : This message was deleted. June 30, 2025 at 9:00 PM, Mr.Miti (미티) FA : You’re welcome! Trays moving June 30, 2025 at 9:11 PM, Szmrtyka Balázs : Sziasztok Anód roll raktár 1-es stockernél lefagyott egy agv June 30, 2025 at 9:11 PM, Vörös Geri : Katód slitt 2 transfer probléma van.megnéznétek.köszi June 30, 2025 at 10:00 PM, Margaret : Anod the conveyor stopped June 30, 2025 at 10:01 PM, Shakir (MCS) : Could you do it again, Thanks June 30, 2025 at 10:01 PM, Mr.Miti (미티) FA : Yes June 30, 2025 at 10:02 PM, cehmannzsoltcehmann : Check June 30, 2025 at 10:07 PM, Mr.Miti (미티) FA : Its done June 30, 2025 at 11:42 PM, Margaret : Anod the conveyor stopped. Please check June 30, 2025 at 11:43 PM, Shakir (MCS) : @Mr.Miti (미티) FA Please redirect the trays to the other warehouse. Its overloaded crane busy. Thank you June 30, 2025 at 11:52 PM, Mr.Miti (미티) FA : Done June 30, 2025 at 11:59 PM, 김대호 (Kim Dae Ho) : Please check the Cathode 2f conveyor. July 1, 2025 at 12:15 AM July 1, 2025 at 12:15 AM, Mr.Miti (미티) FA : Solved July 1, 2025 at 12:55 AM, 김대호 (Kim Dae Ho) : Please check the Anode 2f conveyor. July 1, 2025 at 1:07 AM, gutenkunstabelzoltan : Checked itt will be good July 1, 2025 at 1:10 AM, Margaret : anode slitt 5 problem with the transfer . Please check July 1, 2025 at 1:12 AM, gutenkunstabelzoltan : Kesz July 1, 2025 at 1:32 AM, 심재윤 : @FA 양극 1Line AGV송신오류 입니다 July 1, 2025 at 1:33 AM, 심재윤 : 1st R/w July 1, 2025 at 1:37 AM, 김지수PM(Gyuri)_FA : This message was deleted. July 1, 2025 at 2:14 AM, 김대호 (Kim Dae Ho) : E/V in Anode reel is stopped Check please July 1, 2025 at 2:18 AM, Shakir (MCS) : @Mr.Miti (미티) FA Please redirect the trays to the STKA52 warehouse. Thank you July 1, 2025 at 2:20 AM, 김대호 (Kim Dae Ho) : Cathode press 7 U/w servo pack alarm check please July 1, 2025 at 2:26 AM, adambenczik : Solved July 1, 2025 at 2:27 AM, cehmannzsoltcehmann : Done July 1, 2025 at 2:39 AM, Margaret : Anod the conveyor stopped. Please check July 1, 2025 at 2:41 AM, adambenczik : Solved July 1, 2025 at 3:26 AM, 김대호 (Kim Dae Ho) : Please check the Cathode 2f conveyor alarm July 1, 2025 at 3:26 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_021/43/47 it has port interface error. Thank you July 1, 2025 at 3:37 AM, adambenczik : Working on it July 1, 2025 at 4:10 AM, Powder tréner : Sziasztok,rátudtok nézni, E1PLA31_P01 portra anodon nem akarja a raktár kiadni az anyagot. July 1, 2025 at 4:18 AM, cehmannzsoltcehmann : @Shakir (MCS) pls check July 1, 2025 at 4:24 AM, Shakir (MCS) : Could you please check the crane of STKA12, it is not moving. Job exits for this port. Thank you July 1, 2025 at 4:25 AM, 정대현 : @Fa Please check the cathode 1 Agv. July 1, 2025 at 4:30 AM, 김태현 : Agv arrived. July 1, 2025 at 5:04 AM, Szmrtyka Balázs : Katód press #7 rewinderen kiállt hibára a szekér July 1, 2025 at 5:07 AM, Szmrtyka Balázs : Megoldódott July 1, 2025 at 6:04 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.01. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): --------------- Electrode(3): Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ----------- July 1, 2025 at 6:06 AM, Viktoriia Hleba : Sziasztok Anode convejor stop July 1, 2025 at 6:14 AM, Viktor Vadas : Sziasztok! Coatingon Katod 1 termel jelenleg, ott hasznalunk AGV-t! July 1, 2025 at 6:15 AM, Szücs Géza FT-B : srácok ottvannak July 1, 2025 at 6:19 AM, Böröcz Tamás : Hónap végi leltár miatt állnak a raktárak. Emiatt feltorlódott a CV elirányitottam az A51be viszont üres tálca nem lesz amíg nem indulnak el. July 1, 2025 at 6:25 AM, Dana Honak : Sziasztok Cathode convejor stop! July 1, 2025 at 6:26 AM, Böröcz Tamás : Katód anód July 1, 2025 at 6:29 AM, Viktoriia Hleba : Anód slitt 2 nincs tálca July 1, 2025 at 6:29 AM, Böröcz Tamás : De már elindultak a raktárak átirányítjuk ott is a tálcákat a C51be így hamarabb fogy le a téli és hamarabb jön üres mert megoszlik a terhelés July 1, 2025 at 6:30 AM, Szücs Géza FT-B : várjál még, Harry kétértelműen fogalmazott. Vagyis számomra logikátlan volt. July 1, 2025 at 6:30 AM, Böröcz Tamás : Photo July 1, 2025 at 6:31 AM, Böröcz Tamás : Max legközelebb nem bízzák ránk és leszervezik a termeléssel July 1, 2025 at 8:11 AM, Jun(정우준)_SKOH FA : we don't have an ANODE empty tray for sliter. July 1, 2025 at 8:12 AM, duzzaman Md (MCS) : Yes, only 1 material available July 1, 2025 at 8:30 AM, Böröcz Tamás : There is 11 in A52 July 1, 2025 at 9:22 AM, Dana Honak : Sziasztok Cathode convejor stop! July 1, 2025 at 9:23 AM, Csanálosi Gábor FA : Jövünk July 1, 2025 at 9:28 AM, Csanálosi Gábor FA : Kész July 1, 2025 at 10:28 AM, Szarka Adrián : Sziasztok Assy anod Nc reel raktarhoz költözünk egy kicsit. Egész nap reel kiszedést kell csinálni. Köszönöm July 1, 2025 at 11:24 AM, Dana Honak : Cathode slitt 1-2 convejor stop! July 1, 2025 at 11:26 AM, Rácz Dániel / FA : Indítjuk July 1, 2025 at 11:30 AM, Dana Honak : Cathode slitt 1 Nincs a távirányítón szám tálca ! July 1, 2025 at 11:34 AM, duzzaman Md (MCS) : @FA Kindly check Port interface error at E0CNVC51_08_047 Thank you July 1, 2025 at 11:35 AM, Rácz Dániel / FA : Solved July 1, 2025 at 11:35 AM, Szarka Adrián : Nem tudják elküldeni a talcat mert nem olvasta be a számot a gep. Köszi (thumbsup)(thumbsup) July 1, 2025 at 11:35 AM, Rácz Dániel / FA : Megyek July 1, 2025 at 11:36 AM, 장영환(Younghwan Chang) : 양극 롤창고에 AGV 4대 멈춰있는데 조치 부탁드립니다 July 1, 2025 at 11:43 AM, Rácz Dániel / FA : Kész July 1, 2025 at 11:43 AM, Rácz Dániel / FA : Kész July 1, 2025 at 11:45 AM, Rácz Dániel / FA : 준비가 된 July 1, 2025 at 11:47 AM, Szarka Adrián : Köszönjük July 1, 2025 at 11:48 AM, Dana Honak : 1 slitt cathode Nem közelít talca ! July 1, 2025 at 11:53 AM, Rácz Dániel / FA : Mehet July 1, 2025 at 11:57 AM, Rácz Dániel / FA : @Szarka Adrián CA slitt 1 en van valami tábla kirakva hogy VESZÉLY. Most akkor nem mehet ? July 1, 2025 at 11:58 AM, Rácz Dániel / FA : Ott vannak az üres tálcák July 1, 2025 at 12:08 PM, Dana Honak : Cathode slitt 1-2 convejor stop! July 1, 2025 at 12:09 PM, Szarka Adrián : Ha nem megy a gep akkor ki kell rakni. De tudtommal nincs semmi baja a gépnek. @Dana Honak July 1, 2025 at 12:14 PM, Anton Mashchenko : Come to cathode press 2, AGV position error! U/W! Thanks! July 1, 2025 at 12:14 PM, Szarka Adrián : Köszönöm July 1, 2025 at 12:25 PM, Csanálosi Gábor FA : Done July 1, 2025 at 12:27 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) can you pls send gf el agv14 from stkc33 to another stk? July 1, 2025 at 12:30 PM, Böröcz Tamás : Solved July 1, 2025 at 12:31 PM, duzzaman Md (MCS) : Done. Thank you July 1, 2025 at 12:35 PM, Böröcz Tamás : @Fa An slitt 2 UW transfer stop Please check July 1, 2025 at 12:35 PM, Böröcz Tamás : Going July 1, 2025 at 1:21 PM, Anton Mashchenko : Pls, come to cathode warehouse stoker 5! Need enter password! Help! July 1, 2025 at 1:22 PM, Anton Mashchenko : Stoker 1, sorry! July 1, 2025 at 1:23 PM, Csanálosi Gábor FA : Coming July 1, 2025 at 1:23 PM, Rácz Dániel / FA : Jumbo roll ? July 1, 2025 at 1:23 PM, Anton Mashchenko : Yes July 1, 2025 at 1:28 PM, Dana Honak : Cathode convejor stop! July 1, 2025 at 1:34 PM, Rácz Dániel / FA : Megy July 1, 2025 at 2:21 PM, Dana Honak : Cathode convejor stop! July 1, 2025 at 3:00 PM, 장영환(Younghwan Chang) : 양극 롤창고 2호기 자동포트에 AGV 멈춰있는데 조치 부탁드립니다 July 1, 2025 at 3:03 PM, Rácz Dániel / FA : Sokved July 1, 2025 at 4:00 PM, Csicskovics Balázs : Cathode oldalon megállt a conveyor pálya. Gyertek légyszíves. Köszönöm July 1, 2025 at 4:00 PM, Rácz Dániel / FA : Megyünk July 1, 2025 at 4:34 PM, Viktor Vadas : Sziasztok! Folia raktarhoz kernenk segitseget! Koszonom! July 1, 2025 at 4:39 PM, Szücs Géza FT-B : szerintem kész, kérlek ellenőrizd July 1, 2025 at 4:47 PM, Rácz Dániel / FA : Kész July 1, 2025 at 4:50 PM, Szücs Géza FT-B : @Rácz Dániel / FA @Csanálosi Gábor FA @Böröcz Tamás légyszives az STKC34-es rsktárban ellenőrizzétek, hogy melyik a polcadstok a valóságot tükrözik-e. July 1, 2025 at 4:59 PM, Rácz Dániel / FA : Nem kötekedésből, de ez mióta a mi feladatkörünk része ? Vagy csak besegítés miatt kerül erre most sor ? Vagy innentől kezdve ez is a mi feladatunk lesz ? Köszönöm a választ. July 1, 2025 at 5:07 PM, Böröcz Tamás : Az SCS és a valóság megegyezik July 1, 2025 at 5:15 PM, Szücs Géza FT-B : nem leltárazunk, nem keverendő! hiba megelőzés is a célja. és a polcszámok azért is szükségesek, hogy majd valaki visszanézi a replayeket, hogy hogyan is keletkezett a polcon áru nélküli adat, vagy hogy hogyan maradt ott az adat. Remélem a válasz kielégítő volt számodra. 🖖 July 1, 2025 at 5:18 PM, Böröcz Tamás : Nem lenne rossz ha addig nem porszívózna fel az operátor amíg a transfer nem rakja rá a reelt a carrierre July 1, 2025 at 5:25 PM, Csicskovics Balázs : Cathode slitt 3 nincs reeltálca. Köszönöm July 1, 2025 at 5:26 PM, duzzaman Md (MCS) : No materials available. July 1, 2025 at 5:34 PM, Rácz Dániel / FA : @Szarka Adrián mit kell csinálnom az Anód slitt 2 ? July 1, 2025 at 5:34 PM, Szarka Adrián : Kész 😘😘😘😘😘 July 1, 2025 at 5:34 PM, Rácz Dániel / FA : Köszönöm July 1, 2025 at 5:42 PM, Böröcz Tamás : Gondolom ha én véletlenül beejtek valamit a fóliára kapom a fegyelmit July 1, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 1, 2025 at 6:24 PM, Margaret : Hello.anode slitt 2 problem with the transfer . Please check July 1, 2025 at 6:28 PM, Mr.Miti (미티) FA : Coming July 1, 2025 at 6:39 PM, gutenkunstabelzoltan : Kesz July 1, 2025 at 6:42 PM, Karina Lyzanets : Szisztok! Az Cathode oldalon nem jönnek a tálcák, nézzetek meg légyszíves July 1, 2025 at 6:43 PM, Karina Lyzanets : Köszönöm szépen July 1, 2025 at 6:45 PM, Mr.Miti (미티) FA : @VK (mcs) Good Evening! Please increese priority empty reels unloading to slitt cv. Theres no empty tray and the production is stopped. Thank you very much! July 1, 2025 at 6:46 PM, cehmannzsoltcehmann : Nézzük July 1, 2025 at 6:46 PM, Mr.Miti (미티) FA : C51-52 July 1, 2025 at 6:47 PM, VK (mcs) : Cathode conveyor C51 was stopped. For a few minutes, I will increase it. Thx July 1, 2025 at 6:47 PM, VK (mcs) : STK* July 1, 2025 at 6:47 PM, Mr.Miti (미티) FA : Thank you very much! July 1, 2025 at 6:58 PM, 김대호 (Kim Dae Ho) : Is there any action? Trey is still not coming. July 1, 2025 at 7:00 PM, gutenkunstabelzoltan : First one is ont the way July 1, 2025 at 7:06 PM, VK (mcs) : Carriers will transfer soon. July 1, 2025 at 7:06 PM, Mr.Miti (미티) FA : Thank you! July 1, 2025 at 7:46 PM, 오대근 invited 전준영. July 1, 2025 at 8:47 PM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8021) Carrier is not moving. July 1, 2025 at 8:50 PM, Karina Lyzanets : Cathode oldalon megállt a conveyor🥹🥹 July 1, 2025 at 8:50 PM, Mr.Miti (미티) FA : Nézik már July 2, 2025 at 12:06 AM July 2, 2025 at 12:06 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8021) Carrier is not moving. July 2, 2025 at 12:09 AM, gutenkunstabelzoltan : Its good now ye? July 2, 2025 at 12:10 AM, VK (mcs) : Yes thank you , now start to move July 2, 2025 at 12:18 AM, Powder tréner : Sziasztok,szeretnék kérni segítséget a powder anod raktáron a conveyoron elakadt egy raklap és nem akarja élvezni az RTV. July 2, 2025 at 12:29 AM, cehmannzsoltcehmann : Megyünk July 2, 2025 at 12:31 AM, Karina Lyzanets : Az Slitt Cathode 2 re hozza AGV robot az anyagot July 2, 2025 at 12:31 AM, Karina Lyzanets : Köszönöm July 2, 2025 at 12:32 AM, Mr.Miti (미티) FA : Igen viszi July 2, 2025 at 12:33 AM, Karina Lyzanets : Akkor jó, köszi szépen(thumbsup) July 2, 2025 at 12:33 AM, Mr.Miti (미티) FA : (thumbsup) July 2, 2025 at 12:44 AM, cehmannzsoltcehmann : Készeb July 2, 2025 at 2:23 AM, VK (mcs) : @FA Please check Cathode reel conveyor C51 (8021) Run time over . July 2, 2025 at 2:27 AM, adambenczik : Solved July 2, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 2, 2025 at 6:12 AM, Yena Valerii : Hello, pls check what happened with AGV 9 on cathode side July 2, 2025 at 6:13 AM, Oláh András : Coming July 2, 2025 at 6:25 AM, Shakir (MCS) : @FA Please check E0CNVA51_06_028 run time over error Thank you July 2, 2025 at 6:27 AM, Oláh András : Chexking July 2, 2025 at 6:27 AM, Hári Zoltàn : Katod 1 1es rw elott megallt az agv! Gyertel legyszi! Koszi! July 2, 2025 at 6:28 AM, Oláh András : Megyünk July 2, 2025 at 7:20 AM, Kozma István : Anód 1 1rw kérnénk segítséget July 2, 2025 at 7:23 AM, Kozma István : Jössztök? July 2, 2025 at 7:23 AM, Kiss Balázs F.A. : Igen July 2, 2025 at 7:35 AM, ~Lidiia~리디 ~ : Hello, Cathode slitt 4. There was a problem with AGV transfer. Please check this. Thank you @FA July 2, 2025 at 7:47 AM, Oláh András : Alacsony létszámunk miatt türelmet kérünk July 2, 2025 at 8:02 AM, Hári Zoltàn : Katód 1 roll raktárhoz gyertek légyszi. Nem tudjuk beküldeni a rollt. Köszi! July 2, 2025 at 8:20 AM, Shakir (MCS) : @FA Please check E0STKC31_C01 there is SCP Main Power CP trip. Thank you July 2, 2025 at 8:23 AM, Novák Károly F. A. : Solved July 2, 2025 at 9:03 AM, Hári Zoltàn : Techmikust kernek az anod 1-1es rwnél áll az agv! Köszi! July 2, 2025 at 9:03 AM, Oláh András : Már megyünk is July 2, 2025 at 9:45 AM, ~Lidiia~리디 ~ : @FA Cathode Slitt 4 conveyor problem. Please check this. Thank you! July 2, 2025 at 9:58 AM, Novák Károly F. A. : Checking July 2, 2025 at 10:08 AM, Novák Károly F. A. : Done July 2, 2025 at 10:10 AM, ~Lidiia~리디 ~ : Cathode slitt 4 again problem conveyor. Please check this, thank you July 2, 2025 at 10:12 AM, Oláh András : Com8ng July 2, 2025 at 10:12 AM, Oláh András : Ing* July 2, 2025 at 10:15 AM, 임동현 : Cathode press 8 R/W robot stopped July 2, 2025 at 10:30 AM, Novák Károly F. A. : Done July 2, 2025 at 10:59 AM, Sazzad Bhai SKon : @FA E0STKA31 (0200704) Please check if this port is empty. Because crane shows an alarm: empty release fork error July 2, 2025 at 11:03 AM, Szabadi Miki : This shelf is empty July 2, 2025 at 11:10 AM, Hári Zoltàn : Szeretném jelezni, hogy az Anód 2 coater elindult. A következő rollokat még manuálisan vesszük le, de hamarosan átállunk agv-re! Köszi! July 2, 2025 at 11:14 AM, 임동현 : Cathode press 8 R/W robot stopped July 2, 2025 at 11:30 AM, Hári Zoltàn : Techmikust lernek a foliaraktarhoz! Koszi! July 2, 2025 at 11:31 AM, Kiss Balázs F.A. : Megyünk July 2, 2025 at 12:11 PM, Rudyi Volodymyr : @ FA Please come to the coating Cathode 1 July 2, 2025 at 12:46 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_014/15 run time over error Thank you July 2, 2025 at 12:47 PM, Dániel Hufnágel : Just a moment please July 2, 2025 at 12:47 PM, Oláh András : Checking July 2, 2025 at 12:48 PM, Dániel Hufnágel : @Shakir (MCS) Good afternoon! Please make on order to AGV22 at chatode Coating area! RBC0541 roll is on it, we have to take off manually July 2, 2025 at 12:48 PM, Dániel Hufnágel : Please send it to the storage July 2, 2025 at 12:49 PM, Shakir (MCS) : Good afternoon Working on it July 2, 2025 at 12:55 PM, Shakir (MCS) : AGV22 stated to move ✅ On the way to STKC32 Thank you July 2, 2025 at 12:55 PM, Dániel Hufnágel : Thank you July 2, 2025 at 1:16 PM, ~Lidiia~리디 ~ : @FA Anode slitt 2 there was a problem with the conveyor. Please check this, thank you July 2, 2025 at 1:19 PM, Oláh András : Coming July 2, 2025 at 2:08 PM, 임동현 : Cathode AGV 16 stopped July 2, 2025 at 5:17 PM, Shakir (MCS) invited MCS/RTD System. July 2, 2025 at 7:06 PM, 김대호 (Kim Dae Ho) : Cathode sliter 2 Is there an L/r signal? July 2, 2025 at 7:07 PM, Mohammad Amir : Unfortunately there is no material available. There is an active LR as soon as material will be available jobs will be created. Thank you very much! July 2, 2025 at 7:10 PM, 김대호 (Kim Dae Ho) : Ok, Thank u July 2, 2025 at 7:10 PM, Mohammad Amir : You are welcome! July 2, 2025 at 7:12 PM, 김대호 (Kim Dae Ho) : Cathode press 2 r/w No. 12 agv is blocked and stopped. @fa July 2, 2025 at 7:13 PM, Viczai Tamás : Done July 3, 2025 at 1:00 AM July 3, 2025 at 1:00 AM, Czél Tamás : Sziasztok Katód Slitt 1-nél megállt a konveyor. Kérlek nézzétek meg Köszönöm July 3, 2025 at 1:00 AM, Skwarek Tibor : Megyünk July 3, 2025 at 1:50 AM, Oláh Rajmund : Gyertek legyszives anode slitt 3 robot probléma Koszonom July 3, 2025 at 1:58 AM, Mucsenbacher_Jozsef : Sziasztok Fólia raktárnál nincs net kapcsolat . Így nem tudunk a termeléshez fóliát kivenni . Tudnátok segíteni ? Köszönöm July 3, 2025 at 1:59 AM, Simon Attila F. A. : Megyünk. July 3, 2025 at 2:04 AM, Skwarek Tibor : Újraindítottam a gépet. Van net. July 3, 2025 at 2:08 AM, Mucsenbacher_Jozsef : Köszönöm July 3, 2025 at 2:23 AM, Skwarek Tibor : Szívesen July 3, 2025 at 2:28 AM, Bks.Gabor : Az Anod Press 2-höz tudtok jönni.Köszönöm July 3, 2025 at 2:29 AM, Viczai Tamás : Megyünk July 3, 2025 at 4:17 AM, Bks.Gabor : Anod Press 2-re gyertek légyszíves. Koszonom July 3, 2025 at 4:17 AM, Viczai Tamás : Megyünk July 3, 2025 at 5:37 AM, K.Krisz Coating : Sziasztok! An 1 AGV 1 r/w megállt,nem tudunk bobint felrakni,jumbo az agv n July 3, 2025 at 5:37 AM, Baek Hojong(백호종)FA : @Simon Attila F. A. Check plz July 3, 2025 at 5:38 AM, Baek Hojong(백호종)FA : @Simon Attila F. A. Sziasztok! An 1 AGV 1 r/w megállt,nem tudunk bobint felrakni,jumbo az agv n July 3, 2025 at 5:39 AM, Pintér Gábor : Meg mindig fent áll a hiba July 3, 2025 at 5:43 AM, Simon Attila F. A. : Marsi Gábor is arrive. July 3, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(4) Oláh András , Kiss Balázs, Szabadi Miklós, Novák Károly Assembly(4): GF: Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 3, 2025 at 6:03 AM, Kozma István : Sziasztok, anód jumbóraktárba kérnénk segítséget July 3, 2025 at 6:03 AM, Hári Zoltàn : Jo reggelt! Gyertek gyorsan az an9d roll raktarhoz legyszi! Eleg nagy a kaosz! Koszi! July 3, 2025 at 6:04 AM, Somoskövy Martin : Sziasztok. Anode slitt 1-en az U/W portban lerobbant az AGV. Ránéznétek? Köszönöm. July 3, 2025 at 6:15 AM, Hári Zoltàn : Fóliaraktárhoz gyertek légyszives! Köszi! July 3, 2025 at 6:17 AM, Szabadi Miki : Csináljuk July 3, 2025 at 6:56 AM, 임동현 : This message was deleted. July 3, 2025 at 6:57 AM, 임동현 : Cathode sliter 2 conveyor alarm July 3, 2025 at 7:00 AM, Oláh András : Legyetek szívesek a transfereket maint módba kapcsolni ha takarítotok. Köszönjük July 3, 2025 at 9:13 AM, Hári Zoltàn : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 9:14 AM, Oláh András : Jövök July 3, 2025 at 9:42 AM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 10:14 AM, Hári Zoltàn : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 10:15 AM, Kiss Balázs F.A. : This message was deleted. July 3, 2025 at 10:15 AM, Kiss Balázs F.A. : Jövök* July 3, 2025 at 10:25 AM, 임동현 : anode AGV 11 stopped July 3, 2025 at 10:41 AM, 김건희 : @Kim Dongju(김동주)_FA FA담당자 한분만 양극 슬리터 1호기에 와 주실 수 있으실까요 Roll 한쪽이 찍힌 상태로 agv이동 중이네요 @지찬우 Ec1p073F524373 작업 일자랑 호기좀 알려주세요 July 3, 2025 at 10:42 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. July 3, 2025 at 10:43 AM, 김지수PM(Gyuri)_FA : VC호기 좀 알 수 있을까요? July 3, 2025 at 10:45 AM, 이주봉PM LEE JUBONG(FA) : 지금갈게요 July 3, 2025 at 10:45 AM, 지찬우 : 5월11일 19:12분에 양극프레스 1호기에서 작업했습니다 July 3, 2025 at 10:52 AM, Turianytsia Olesia : AGV U/W B oldal beragadt Anode slitt 1 July 3, 2025 at 10:53 AM, Oláh András : Kis türelem cat1nél vagyunk July 3, 2025 at 10:53 AM, Turianytsia Olesia : Az átvitel nem vette át az A oldali anyagot. Anode slitt 2 July 3, 2025 at 10:56 AM, 김지수PM(Gyuri)_FA : @mcs Please transfer the rbc1991(VC01) to C35 warehouse thanks July 3, 2025 at 10:56 AM, 서지원 : @KIM SEYEON [김세연]_FA 음극 코터 2호기 AGV가 이동 도중 충전이 필요해서 되돌아갔고, 수동 조치가 늦어 코터 설비 정지했습니다. 확인부탁드리며 금일 오후 1시부터 제조총괄님 전극 현장 방문 예정으로 양극 2라인/음극1라인/음극 2라인 가동 예정입니다. 참고 부탁드립니다. July 3, 2025 at 10:58 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 금일 문제가 없도록 잘 관리하겠습니다. July 3, 2025 at 10:58 AM, MCS/RTD System : Transfer initiated July 3, 2025 at 10:59 AM, Oláh András : @Somoskövy Martin légyszíves cat slitt1en küld el az 1es rw-ről a tekercset köszi 👍🏻 July 3, 2025 at 11:02 AM, Oláh András : Kérlek figyeljetek oda hogy ne lépjetek a fényfüggönybe amikor megy a transfer.... July 3, 2025 at 11:15 AM, Oláh András : @Erik Gerzsenyi tudsz hívni karbantartót katod slitt 1hez? Valószínű egy reed relét kell cseréln8 July 3, 2025 at 11:15 AM, Oláh András : I July 3, 2025 at 11:18 AM, Oláh András : Téves riasztás 😁 July 3, 2025 at 11:21 AM, MCS/RTD System : @FA PLEASE CHECK E0STKA35_C01 SCP MAIN POWER TRIP. THANKS July 3, 2025 at 11:22 AM, MCS/RTD System : Also, kindly check E0STKA32_P01 AGV RETRY COUNT EXCEEDED July 3, 2025 at 11:54 AM, 임동현 : Please check the error in the anode roll warehouse #4 July 3, 2025 at 11:56 AM, MCS/RTD System : Over 60 mins and still exists. July 3, 2025 at 11:57 AM, Oláh András : Checking July 3, 2025 at 12:09 PM, Oláh András : Will be more. Its manual port for manufacture and they forget send in the roll July 3, 2025 at 12:10 PM, MCS/RTD System : Thank you for the information 🙏 July 3, 2025 at 12:38 PM, 카스텔 발라지 F.A. : @MCS/RTD System Can you please check the material on the E0STKA35 crane? Everything is ok with that material? July 3, 2025 at 12:44 PM, 카스텔 발라지 F.A. : @Sazzad Bhai SKon July 3, 2025 at 12:47 PM, 카스텔 발라지 F.A. : @MCS/RTD System pls check E0STKA35 job July 3, 2025 at 12:49 PM, Sazzad Bhai SKon : Checking July 3, 2025 at 12:53 PM, MCS/RTD System : @FA Please check E0STKA35_C01 Receive data request error July 3, 2025 at 12:57 PM, MCS/RTD System : When the machine comes back to service, this issue will be solved July 3, 2025 at 1:00 PM, 카스텔 발라지 F.A. : In MCS I see 2 orders for the crane, a job and a command. Can you delete them? Then I give the crane a new order in SCS July 3, 2025 at 1:06 PM, 카스텔 발라지 F.A. : This message was deleted. July 3, 2025 at 1:09 PM, 카스텔 발라지 F.A. : Can you please delete the carrier from the crane ? After that reinstall? July 3, 2025 at 1:09 PM, Sazzad Bhai SKon : We can delete the carrier July 3, 2025 at 1:10 PM, 카스텔 발라지 F.A. : After that, can you please reinstall to the crane? July 3, 2025 at 1:11 PM, Sazzad Bhai SKon : Job received by STK. July 3, 2025 at 1:12 PM, Sazzad Bhai SKon : Wait, it'll move now July 3, 2025 at 1:12 PM, 카스텔 발라지 F.A. : Unfortunately, no 😔 July 3, 2025 at 1:13 PM, Sazzad Bhai SKon : Because crane is offline mode. Inactive (stop) July 3, 2025 at 1:15 PM, 카스텔 발라지 F.A. : Yes I know. We can't start it because of some error July 3, 2025 at 1:16 PM, Sazzad Bhai SKon : STK received the job without error. Now it stopped due to equipment failure, transport job is okay July 3, 2025 at 1:18 PM, 카스텔 발라지 F.A. : Yes, thank you 👍 July 3, 2025 at 1:46 PM, Sazzad Bhai SKon : E0STKA35_C01 is not working. There is Fork1 cargo presence error July 3, 2025 at 1:59 PM, Hári Zoltàn : Cathode 2 coateren elkezdjük használni az agv-t! Gyertek felügyelni légyszi nehogy baj legyen a CEO látogatás alatt! Köszi! July 3, 2025 at 2:11 PM, Oláh András : @Shahbaz 샤바즈 MCS/RTD can u modify E0STKA35 orders? Its OOS and anode press 3 waiting for material July 3, 2025 at 2:12 PM, Somoskövy Martin : @Sazzad Bhai SKon Hi. Currently we have multiple storage problems and probably the material intended for Anode Press 3 is not coming out. Is it possible to redirect transportation to this machine from a different storage unit? July 3, 2025 at 2:19 PM, Sazzad Bhai SKon : E0STKA35_C01 is not working. There is Fork1 cargo presence error July 3, 2025 at 2:22 PM, MCS/RTD System : Please press LR in press 3 July 3, 2025 at 2:53 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 2:56 PM, 서지원 : @FA 음극 2라인 코팅 확인좀 해주세요… 아까 스탑이후에 방금 라인 재가동했습니다 July 3, 2025 at 3:07 PM, 지찬우 : Please check the error in Cathode Roll Warehouse 2 July 3, 2025 at 3:08 PM, Oláh András : Coming July 3, 2025 at 3:22 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 3:31 PM, Kiss Balázs F.A. : Itt vagyunk July 3, 2025 at 4:37 PM, Hári Zoltàn : Anod 2 coater agv problema! Gyertek legyszi! Koszi July 3, 2025 at 4:38 PM, Szabadi Miki : Megyünk July 3, 2025 at 4:56 PM, Hári Zoltàn : Gyertek vissza legyszi az anod 2 re! Veletlenul belenyultunk a fenyfuggonybe! Suru elnezes! July 3, 2025 at 4:57 PM, Szabadi Miki : Megyünk 😀 July 3, 2025 at 5:17 PM, 카스텔 발라지 F.A. : @MCS/RTD System Please delete the carrier from the crane, and the order also E0STKA35 Thank you very much! July 3, 2025 at 5:20 PM, MCS/RTD System : The STK is currently OOS July 3, 2025 at 5:36 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 3, 2025 at 6:51 PM, Simon Attila F. A. : @VK (mcs) good evening! Please check E0STKA35 fork, because stay data on the fork. The crane fork is empty. July 3, 2025 at 6:55 PM, VK (mcs) : Data cleared. now crane has inactive stop error. July 3, 2025 at 7:01 PM, 김지수PM(Gyuri)_FA : Could you please remove the jobs for E0stka35? July 3, 2025 at 7:04 PM, Simon Attila F. A. : Moment... July 3, 2025 at 7:04 PM, VK (mcs) : These carriers have destination o Press, would you still want me to cancel them? July 3, 2025 at 7:08 PM, Simon Attila F. A. : SL delete the jobs, and again press LR. Thanks for help. July 3, 2025 at 7:09 PM, 김지수PM(Gyuri)_FA : Wait, maybe have to check all of carriers are wiring for to be transferred. Seems like have to check the real location July 3, 2025 at 7:10 PM, Simon Attila F. A. : Fork data error stay on the STKA35 fork, sorry. Can you see anything? July 3, 2025 at 7:32 PM, Simon Attila F. A. : @VK (mcs) Now working. Thank you gor help! July 3, 2025 at 7:32 PM, VK (mcs) : Anytime July 3, 2025 at 9:38 PM, Pintér Gábor : Foil stocker problémánk akadt July 3, 2025 at 9:38 PM, Simon Attila F. A. : Itt is vagyok. July 3, 2025 at 11:36 PM, Simon Attila F. A. : Anode roll warehouse 5 (E0SKA35) is currently unavailable. It will be inspected tomorrow morning due to a drive problem. July 3, 2025 at 11:45 PM, Oláh Rajmund : Sziasztok, meg tudjátok nézni hogy miért jönnek ilyen lassan a tálcák anode oldalon? Koszonom July 3, 2025 at 11:48 PM, Skwarek Tibor : Sok feladata van a daruknak. Hibát egyelőre nem látok July 4, 2025 at 12:17 AM July 4, 2025 at 12:17 AM, 장정훈 : @김건희 Please refer to the contents July 4, 2025 at 1:21 AM, Baek Hojong(백호종)FA : @FA E0CNVA51 6046 6042 Conveyer check plz July 4, 2025 at 1:21 AM, Viczai Tamás : Már itt vagyunk! July 4, 2025 at 3:07 AM, Zsmenyák György : Sziasztok, notchingon a 10 raktárban beragadt a reel tálca July 4, 2025 at 3:10 AM, Viczai Tamás : Anód raktárnál keress techikust! July 4, 2025 at 3:13 AM, Zsmenyák György : Ok köszi July 4, 2025 at 4:35 AM, Czél Tamás : Sziasztok Katód Slitt 1-en nem olvasta mbe a tray ID-t a kamera. Kérlek nézzetek rá Köszönöm July 4, 2025 at 4:36 AM, Viczai Tamás : Megyünk July 4, 2025 at 5:54 AM, Mohammad Amir : Good morning @FA, Please check STKC13_C01 MCP Control Power CP trip error. Thank you very much! July 4, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.04. 10+2/12+2 Tech, 1Sl, 1Sup. Overtime(1): Szabadi Miklós Holiday(2): Gerbovits Kevin, Böröcz Tamás Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János July 4, 2025 at 6:13 AM, Viktor Vadas : Sziasztok! Anod 1-2 kozott megakadt egy AGV Jumboval ehhez kernenk a segitsegetek! Koszonom! July 4, 2025 at 6:13 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B Good Morning Geza Can you check GF AN ROLL STORAGE AREA AGV? July 4, 2025 at 6:14 AM, Rácz Dániel / FA : Megyek July 4, 2025 at 6:15 AM, Szücs Géza FT-B : 2 Technicians are on this area July 4, 2025 at 6:15 AM, 심재윤 : @FA Kérjük, ellenőrizze az anódot 1.2 AGV. Elzáródás van a raktár felől. July 4, 2025 at 6:26 AM, Csanálosi Gábor FA : Kész July 4, 2025 at 6:31 AM, Rácz Dániel / FA : Ready July 4, 2025 at 6:34 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 8:26 AM, Mohammad Amir : Good morning @Rácz Dániel / FA Please check E0CNVC51_08_085 there is Data Mismatch error it is blocking materials recovery. And also please make E0STKC51_P03 to auto mode currently it is in Manual mode,it will cause blockage in materials recovery in future. Thank you very much! July 4, 2025 at 8:37 AM, Viktoriia Hleba : 3 slitter anode u/w robot stop. Please check July 4, 2025 at 8:39 AM, Czeilinger Krisztián : Megyünk. July 4, 2025 at 8:40 AM, Viktor Vadas : Sziasztok! Katod 2 1-es rewindernel megakadt egy AGV July 4, 2025 at 8:40 AM, 김태현 : Can I use the cathode 2 AGV? July 4, 2025 at 8:41 AM, Czeilinger Krisztián : Megyek July 4, 2025 at 9:06 AM, Viktoriia Hleba : Anod slit 2 nincs AGV 15p July 4, 2025 at 9:07 AM, Mohammad Amir : AGV#25 in the way now ✅. Thank you very much! July 4, 2025 at 9:24 AM, Dana Honak : Cathode slitt 3 ninc AGV 17 perc! July 4, 2025 at 9:25 AM, Mohammad Amir : Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 4, 2025 at 10:10 AM, Csicskovics Balázs : Cathode press 2 nincs AGV 15 perce. Kérlek nézzétek meg. Köszönöm July 4, 2025 at 10:12 AM, Mohammad Amir : @FA @Szabadi Miki Please check STKC32_C01 it is inactive without error and because of this job for Press -2 cathode is being delayed. Please make it active. Thank you very much! July 4, 2025 at 10:13 AM, Mohammad Amir : @Csicskovics Balázs Due to this reason you witnessed delay. I am monitoring. Thank you very much! July 4, 2025 at 10:13 AM, Szabadi Miki : Checking July 4, 2025 at 10:15 AM, Szabadi Miki : STKC32 is started July 4, 2025 at 10:15 AM, Mohammad Amir : Update:- STKC32_C01 is active again and now Roll RBC1539 on the way to Cathode Press -2. ✅ Thank you very much! July 4, 2025 at 10:15 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 10:15 AM, Szabadi Miki : Very welcome July 4, 2025 at 10:34 AM, Mohammad Amir : @Szabadi Miki Please check STKC13_C01 there is MCP Control Power CP trip error. Thank you very much! July 4, 2025 at 10:39 AM, Csanálosi Gábor FA : He is OOS, i go in few minits, hold on. :) July 4, 2025 at 11:00 AM, Csanálosi Gábor FA : Done July 4, 2025 at 11:00 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 11:17 AM, Nagy Dávid 4 : Press anod 3 AGV problem R/W help köszönöm szépen July 4, 2025 at 11:18 AM, Nagy Dávid 4 : Anod slit 2 nincs AGV 15p help help help köszönöm szépen July 4, 2025 at 11:18 AM, Viktoriia Hleba : Anod slit 2 nincs AGV 15p July 4, 2025 at 11:19 AM, Mohammad Amir : Checking July 4, 2025 at 11:20 AM, Mohammad Amir : Now AGV#24 on the way ✅. Thank you very much! July 4, 2025 at 11:20 AM, Mohammad Amir : @Nagy Dávid 4 For your information as well. Thank you very much! July 4, 2025 at 11:24 AM, Nagy Dávid 4 : Done July 4, 2025 at 11:35 AM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. July 4, 2025 at 11:36 AM, Czeilinger Krisztián : Itt vagyunk. July 4, 2025 at 11:37 AM, Mohammad Amir : @Csanálosi Gábor FA Please check E0CNVA51_06_152/151 there is Run Time over error and it has stopped the materials recovery from Slitter -2&3. Thank you very much! July 4, 2025 at 11:38 AM, Czeilinger Krisztián : Kész July 4, 2025 at 12:39 PM, Viktoriia Hleba : Anod slit 2 nincs AGV 15p July 4, 2025 at 12:40 PM, Mohammad Amir : Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 4, 2025 at 12:43 PM, Viktoriia Hleba : Anod slit 2 nincs tarca July 4, 2025 at 12:44 PM, Szabadi Miki : Checking July 4, 2025 at 12:44 PM, Mohammad Amir : Please check LTA0494located E0CNVA51_06_034 it is not moving and blocking empty trays delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! July 4, 2025 at 12:46 PM, Szabadi Miki : Done July 4, 2025 at 12:47 PM, Mohammad Amir : Thank you very much! July 4, 2025 at 12:47 PM, Mohammad Amir : Issue has been resolved ✅ Empty trays on the way. Thank you very much! July 4, 2025 at 12:54 PM, Viktoriia Hleba : Anod slit 1 nincs AGV 18 perc July 4, 2025 at 12:56 PM, Mohammad Amir : Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 4, 2025 at 1:03 PM, Viktoriia Hleba : 3 slitter anode nincs Agv - 20 perc July 4, 2025 at 1:08 PM, Mohammad Amir : @Szabadi Miki Please check E0STKA31_P01 there is AGV PIO time over error that's why job for Andoe Slitter -3 is getting delayed. Thank you very much! July 4, 2025 at 1:09 PM, Szabadi Miki : Cheking July 4, 2025 at 1:15 PM, Csanálosi Gábor FA : RBA0789 PLS send agv for this, and send wherever need, too many rolls at the ports atm. July 4, 2025 at 1:24 PM, Mohammad Amir : Could you please send this carrier manually to the STK ,job created from MCS is not executing cause SCS is not executing MCS command. Thank you very much! July 4, 2025 at 1:24 PM, Mohammad Amir : Please press LR again for Anode Slitter -3. Thank you very much! July 4, 2025 at 1:26 PM, Viktoriia Hleba : Ok July 4, 2025 at 1:28 PM, Csanálosi Gábor FA : Commands for manual transport with agv from 31 to 33 is sent, agv on the way July 4, 2025 at 1:28 PM, Mohammad Amir : Thank you very much! July 4, 2025 at 1:28 PM, Csanálosi Gábor FA : Your welcome! July 4, 2025 at 1:36 PM, Mohammad Amir : Update:- AGV#11 on the way to Slitter Anode -3 ✅ Thank you very much! July 4, 2025 at 2:33 PM, Viktoriia Hleba : Anod slit 2 nincs AGV 15p July 4, 2025 at 2:34 PM, Mohammad Amir : Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 4, 2025 at 3:42 PM, Mohammad Amir : @FA Please check E0CNVA51_16_021 there is Data Loss error. Thank you very much! July 4, 2025 at 3:42 PM, Szabadi Miki : Checking July 4, 2025 at 3:42 PM, Mohammad Amir : 06-021**" July 4, 2025 at 3:47 PM, Szabadi Miki : Korean technician working there July 4, 2025 at 3:48 PM, Mohammad Amir : Thank you very much for the information! July 4, 2025 at 3:50 PM, Szabadi Miki : Very welcome July 4, 2025 at 4:09 PM, Viktoriia Hleba : anod slitt 2 nincs AGV 14p July 4, 2025 at 4:10 PM, Mohammad Amir : Now, Issue has resolved ✅ AGV#7 on the way. Thank you very much! July 4, 2025 at 4:56 PM, Aloshyn Yevhen : Anode press 1 no AGV 15 min July 4, 2025 at 4:56 PM, Mohammad Amir : AGV#19 in the way now. Thank you very much! July 4, 2025 at 5:03 PM, Mohammad Amir : Issue has been resolved again ✅ Now AGV#15 on the way. I am monitoring for smooth delivery. Thank you very much! July 4, 2025 at 5:17 PM, Szarka Adrián : Sziasztok katod Slitt 1 konvejor meg állt July 4, 2025 at 5:17 PM, Szarka Adrián : Nézzetek meg legyszives July 4, 2025 at 5:17 PM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVC51_08_126/127 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 4, 2025 at 5:17 PM, Czeilinger Krisztián : Itt July 4, 2025 at 5:20 PM, Rácz Dániel / FA : Kész July 4, 2025 at 5:20 PM, Czeilinger Krisztián : Ready July 4, 2025 at 5:20 PM, Mohammad Amir : Thank you very much! July 4, 2025 at 5:27 PM, Szarka Adrián : Katod Slitt 1 re gyertek légyszíves Bem vitte el az A oldali reelt a robot köszi July 4, 2025 at 5:28 PM, Rácz Dániel / FA : Jövünk July 4, 2025 at 6:09 PM, Sárvári Márk : Sziasztok Anod 2re szeretnénk segítséget kérni. Köszi.✌️ July 4, 2025 at 6:12 PM, adambenczik : Jövök July 4, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 4, 2025 at 6:45 PM, Sárvári Márk : Anod 2re szeretnénk segítséget kérni. Köszi.✌️ July 4, 2025 at 6:45 PM, Karina Lyzanets : Sziasztok! Az Cathode oldalon megállt a conveyor Köszönöm szépen July 4, 2025 at 6:45 PM, adambenczik : Ugyan az? July 4, 2025 at 6:46 PM, Mr.Miti (미티) FA : Szia! A conveyor raktár hiba miatt telt fel. July 4, 2025 at 6:53 PM, Karina Lyzanets : Slitt Cathode 3 nincs AGV 25-30 perc Kérlek nézzetek meg, köszi July 4, 2025 at 6:55 PM, 김지수PM(Gyuri)_FA : Not available materials July 4, 2025 at 6:56 PM, MCS/RTD System : @FA Please check Cathode Reel conveyor C51 (8021) Carrier is not moving. July 4, 2025 at 6:57 PM, adambenczik : Checking July 4, 2025 at 6:57 PM, Mr.Miti (미티) FA : Az utolsó tálca nem megy be a liftbe July 4, 2025 at 6:57 PM, Mr.Miti (미티) FA : Valószínű a szenzor July 4, 2025 at 6:57 PM, adambenczik : Át állítjuk July 4, 2025 at 7:15 PM, adambenczik : Kész July 4, 2025 at 8:29 PM, Szeitz Flórián : Sziasztok! Anód press 3 ra nem érkezik az anyag. Megnézznètek az okát . Köszönöm July 4, 2025 at 8:30 PM, Szeitz Flórián : (Press 3 PLC a load reauqest statusz nem látszik) . July 4, 2025 at 8:31 PM, gutenkunstabelzoltan : Raktarak jol agv van szabad July 4, 2025 at 8:32 PM, Szeitz Flórián : 1 órája van kérve de semmi . Ès a press 4re se érkezik July 4, 2025 at 8:32 PM, Mr.Miti (미티) FA : Pill nézem July 4, 2025 at 8:32 PM, Szeitz Flórián : Ez megvan csak magyar menüre volt állítva és abban nem látható. July 4, 2025 at 8:34 PM, Mr.Miti (미티) FA : Már látom mi a baj. Intézzük July 4, 2025 at 8:34 PM, VK (mcs) : @FA Please check Anode roll STK A33 Destination port dolly reservation off. July 4, 2025 at 8:42 PM, Mr.Miti (미티) FA : Nemsokára megy a roll July 4, 2025 at 8:51 PM, 김지수PM(Gyuri)_FA : @fa Please check e0stak32_M01 Input H/S off thanks July 4, 2025 at 10:07 PM, Sárvári Márk : Töltő állomás mellett értetlenkedik az egyik robot, Anod oldalon Coatingon. Lécci csináljatok vele valamit. July 4, 2025 at 10:08 PM, Mr.Miti (미티) FA : Nézzük! July 4, 2025 at 10:10 PM, Sárvári Márk : Illetve az Anod raktárban is van egy anomália, lécci azt is.✌️ July 5, 2025 at 2:48 AM July 5, 2025 at 2:48 AM, Vörös Geri : Katód Slitt 4 re szeretnék segitséget kérni.köszi July 5, 2025 at 3:26 AM, Powder tréner : Sziasztok szeretnék segítséget kérni powder anod 4 sor melet megált 3 AGV. July 5, 2025 at 3:27 AM, adambenczik : Megyünk July 5, 2025 at 6:07 AM, Viktor Vadas : Sziasztok! Anod 1 1-es rewinderre elfelejtett jonni az AGV, segitseget kernenk! Koszonjuk! July 5, 2025 at 6:08 AM, Viktor Vadas : Az anod jumbo raktarban pedig megvartak egymast az AGV-k July 5, 2025 at 6:10 AM, Csicskovics Balázs : Sziasztok Cathode press 7 U/W re a robot nem teszi fel a Roll-t. Gyertek légyszives. Köszönöm July 5, 2025 at 6:12 AM, 김대호 (Kim Dae Ho) : Agv is stopped in front of the Anode warehouse. Please check @Fa July 5, 2025 at 6:13 AM, Rácz Dániel / FA : Megyünk July 5, 2025 at 6:16 AM, 심재윤 : Anode 1LINE 1st Agv error July 5, 2025 at 6:16 AM, 심재윤 : @FA July 5, 2025 at 6:20 AM, Rácz Dániel / FA : AGV #9 going July 5, 2025 at 6:21 AM, Viktor Vadas : Koszonom! July 5, 2025 at 6:25 AM, Rácz Dániel / FA : A buffer mode ki volt kapcsolva July 5, 2025 at 6:29 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.05. 10+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Gerbovits Kevin Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János, Boromisza Zoltán --------- July 5, 2025 at 6:32 AM, Viktoriia Hleba : Sziasztok anod slitt 2 nincs AGV 15p July 5, 2025 at 6:34 AM, MCS/RTD System : VC25 departed July 5, 2025 at 6:47 AM, Viktoriia Hleba : 2 slitter anode nem jó szam tálca. Please check! July 5, 2025 at 7:14 AM, Viktoriia Hleba : anod slitt 2 nincs AGV 15p July 5, 2025 at 7:15 AM, Rácz Dániel / FA : AGV #7 már úton van a raktárból July 5, 2025 at 7:38 AM, 김지수PM(Gyuri)_FA : @fa @electrode Could you please rack out LTC0758, LTC1803 (NG carriers) And rack in to c52 aagain? According to the MES, both of them were stocked C52 but in RTD and SCS they were stocked in C51 July 5, 2025 at 7:49 AM, 김대호 (Kim Dae Ho) : Cathode slitet 4 Pio time over error @fa July 5, 2025 at 7:53 AM, Csanálosi Gábor FA : LTC1803 at M1 port, LTC0758 at M1 port now. July 5, 2025 at 7:53 AM, Csanálosi Gábor FA : LTC0758 ON M2 sorry July 5, 2025 at 7:56 AM, 김지수PM(Gyuri)_FA : Szia gabor!, yes I checked both of them racked out 4mins ago. And seems like bot of them have to be stocked in C52 July 5, 2025 at 7:56 AM, Viktoriia Hleba : Anod slit 1 nincs AGV 15 perc July 5, 2025 at 7:57 AM, 김지수PM(Gyuri)_FA : Now VC07 is loading the RBA1129 from the A34 July 5, 2025 at 8:07 AM, Csanálosi Gábor FA : Was problem with picking up, now going there July 5, 2025 at 8:16 AM, Nagy Dávid 4 : Anod slitt 5 help help köszönöm szépen July 5, 2025 at 8:19 AM, Viktoriia Hleba : anod slitt 2 nincs AGV 20p July 5, 2025 at 8:20 AM, MCS/RTD System : No search Lot. No materials available July 5, 2025 at 8:46 AM, 김대호 (Kim Dae Ho) : Ctahode sliter 2f Please check the conveyor. July 5, 2025 at 8:46 AM, Csanálosi Gábor FA : On it July 5, 2025 at 8:52 AM, MCS/RTD System : @FA kindly check E0CNC51_08_004/005 INV 01 RUN TIME OVER ERROR July 5, 2025 at 8:53 AM, Csanálosi Gábor FA : Yup, still on it July 5, 2025 at 8:53 AM, Csanálosi Gábor FA : Solved July 5, 2025 at 10:03 AM, Viktoriia Hleba : anod slitt 2 nincs AGV 15p July 5, 2025 at 10:03 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 15p July 5, 2025 at 10:05 AM, MCS/RTD System : No search lot. July 5, 2025 at 10:05 AM, MCS/RTD System : VC01 departed July 5, 2025 at 12:31 PM, Viktor Vadas : Sziasztok! Coating Anod oldalon a toltonel megallt egy AGV July 5, 2025 at 12:31 PM, Rácz Dániel / FA : Megyünk July 5, 2025 at 12:31 PM, Czeilinger Krisztián : Megyek. July 5, 2025 at 12:31 PM, Czeilinger Krisztián : Megyünk July 5, 2025 at 12:31 PM, Rácz Dániel / FA : Megyek July 5, 2025 at 12:49 PM, Csicskovics Balázs : Cathode press 7-hez gyertek légyszives. Roll felrakás közben megállt a robot. Köszönöm July 5, 2025 at 12:49 PM, Rácz Dániel / FA : Megyek July 5, 2025 at 1:00 PM, Rácz Dániel / FA : CA Slitt 4 a buffer mode ki volt kapcsolva July 5, 2025 at 1:01 PM, Rácz Dániel / FA : Visszakapcsoltam July 5, 2025 at 1:11 PM, Csicskovics Balázs : Gyere vissza kérlek cathode slitt 4-hez! Köszönöm July 5, 2025 at 1:11 PM, Rácz Dániel / FA : Megyek July 5, 2025 at 1:27 PM, Nagy Dávid 4 : Anod slitt 3 Tray ID loss help help köszönöm szépen July 5, 2025 at 2:11 PM, Viktor Vadas : Sziasztok! Katod 2 2-es rewinderre kernek segitseget, hibat ad ki a panel de torolni nem tudjuk! Koszonom! July 5, 2025 at 2:12 PM, Csanálosi Gábor FA : Jövök July 5, 2025 at 2:13 PM, Viktoriia Hleba : Anod slitt1 ninsc AGV July 5, 2025 at 2:20 PM, MCS/RTD System : No search lot July 5, 2025 at 2:30 PM, 오승주 : 코팅 양극 2라인 2nd 리와인더 AGV문제 발생했는데 FA인원들도 원인을 못찾고 있습니다 조치 해주실 한국담당자분 있을까요..? July 5, 2025 at 2:53 PM, 김대호 (Kim Dae Ho) : Anode sliter 2 Auto start position error Please check July 5, 2025 at 2:54 PM, 오승주 : 코팅 양극 2라인 AGV 문제 조치중으로 설비 정지 했습니다. July 5, 2025 at 3:01 PM, Viktoriia Hleba : Anod slitt1 ninsc AGV July 5, 2025 at 3:03 PM, MCS/RTD System : Vehicle 15 will be there , there is active job July 5, 2025 at 3:05 PM, 오승주 : Has the cathode 2-line AGV problem been solved? Can we use it? July 5, 2025 at 3:17 PM, 김태현 : 양극2라인 AGV써도되요? July 5, 2025 at 3:23 PM, Viktoriia Hleba : 3 slitter anode nincs Agv. Please check July 5, 2025 at 3:26 PM, Csanálosi Gábor FA : Yes, you can use it July 5, 2025 at 3:27 PM, Rácz Dániel / FA : This message was deleted. July 5, 2025 at 3:28 PM, 김태현 : Yes, thank you. July 5, 2025 at 3:35 PM, Rácz Dániel / FA : A34 es raktárból a #25 AGV nem sokára viszi July 5, 2025 at 4:02 PM, Viktoriia Hleba : Anod slitt1 ninsc AGV July 5, 2025 at 4:03 PM, MCS/RTD System : There's active job. VC07 is assigned . July 5, 2025 at 4:04 PM, Csanálosi Gábor FA : Agv 7 most megy a raktarhoz az anyagert July 5, 2025 at 4:47 PM, Viktoriia Hleba : Anod slitt1 ninsc AGV 15р July 5, 2025 at 5:08 PM, MCS/RTD System : @FA COULD YOU PLEASE CHECK. CARRIER RBA1244 WAS REMOVED FROM E0STKA32_P01 July 5, 2025 at 5:15 PM, Csanálosi Gábor FA : Thats going to slitt1 July 5, 2025 at 5:16 PM, Csanálosi Gábor FA : With agv24 July 5, 2025 at 5:16 PM, MCS/RTD System : Thank you. That's for Slit 01 @Viktoriia Hleba July 5, 2025 at 5:47 PM, Dana Honak : Cathode slitt . Convejor stop. July 5, 2025 at 5:53 PM, Mr.Miti (미티) FA : Omw July 5, 2025 at 5:59 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 1-2 mögött megállt a conveyor pálya Gyertek nézzetek meg légyszíves July 5, 2025 at 5:59 PM, Karina Lyzanets : Köszönöm July 5, 2025 at 6:02 PM, Mr.Miti (미티) FA : Solved July 5, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Sopronyi Gábor Attila Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Novák Károly Novák Zoltán ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 5, 2025 at 6:58 PM, Margaret : Hello. Come pls anode the conveyor stopped July 5, 2025 at 7:01 PM, adambenczik : Solved July 5, 2025 at 7:36 PM, Oleksii Krasnoshchok : Anode press 3 long time waiting Agv u/w July 5, 2025 at 7:37 PM, VK (mcs) : @FA Please check Anode roll STKA34 port 1 July 5, 2025 at 7:39 PM, adambenczik : Solved July 5, 2025 at 8:26 PM, Karina Lyzanets : Cathode oldalon megállt a conveyor pálya July 5, 2025 at 8:27 PM, Karina Lyzanets : Köszi July 5, 2025 at 8:36 PM, gutenkunstabelzoltan : Elvileg mar jo is July 5, 2025 at 8:36 PM, Mr.Miti (미티) FA : Eszméletlen jó vagy ! (thumbsup)(beams) July 5, 2025 at 8:37 PM, gutenkunstabelzoltan : Nem en voltam :D July 5, 2025 at 8:41 PM, gutenkunstabelzoltan : Mostmar tuti! July 5, 2025 at 9:10 PM, Szabó Zoltán János : Sziasztok, Anod 2 coatingra szeretnek segitseget kerni. 2. r/w-nel beleptek a lezer kapuba. Azota nem tudjuk ujrainditani a panelt. July 5, 2025 at 9:12 PM, adambenczik : Megyünk July 5, 2025 at 9:58 PM, Szeitz Flórián : Sziasztok! Anód press 1-2 re nem érkezik a roll , illetve Anód roll raktár -ba gyertek légyszives,mert A 3 As Stokerbe anyag elakadas van . Köszönöm July 5, 2025 at 10:33 PM, Szeitz Flórián : Anód press 2 mögött le van àllva a 8 As AGV July 5, 2025 at 10:33 PM, Szeitz Flórián : Légyszives nézétek meg. Köszönöm July 5, 2025 at 10:54 PM, Adil Hu : This message was deleted. July 5, 2025 at 10:55 PM, Sárvári Márk : Anod 1re kérnék segítséget.✌️ July 6, 2025 at 12:35 AM July 6, 2025 at 12:35 AM, Vlad Danilevskyi : Hello. Cathode press 7 agv uw error. Thanks July 6, 2025 at 12:45 AM, adambenczik : Kész July 6, 2025 at 12:54 AM, 제범 : please check coating anode1 agv July 6, 2025 at 1:29 AM, Szabó Zoltán János : Anod coatingon kisebb kaosz alakult ki az agv-kkel. Itt allnak a raktar elott illetve az anod coatingon. Van rajtuk jumbo es varakoznak. Ra tudtok nezni, legyszives? Koszonom July 6, 2025 at 1:34 AM, Szeitz Flórián : Sziasztok! Anód Slitt 1 re 50 perce nem érkezik anyag. Megtudnátok nézni. Köszönöm July 6, 2025 at 1:35 AM, Mr.Miti (미티) FA : No avaible material July 6, 2025 at 1:35 AM, Mr.Miti (미티) FA : 😥 July 6, 2025 at 1:55 AM, Karina Lyzanets : Hello. Cathode Press 7 Agv robot U/W error. Thanks July 6, 2025 at 2:05 AM, gutenkunstabelzoltan : Kesz July 6, 2025 at 2:19 AM, Margaret : 3 slitt anode nincs Agv - 30 perc . Please check July 6, 2025 at 2:19 AM, gutenkunstabelzoltan : Anode raktárban volt fennakadás nemsokara megy July 6, 2025 at 2:19 AM, Mr.Miti (미티) FA : Kis türelmet July 6, 2025 at 2:56 AM, Oleksii Krasnoshchok : Anode press 3 long time waiting Agv u/w July 6, 2025 at 2:58 AM, VK (mcs) : AGV 18 is on the way July 6, 2025 at 3:38 AM, Karina Lyzanets : Cathode oldalon megállt a conveyor pálya July 6, 2025 at 3:38 AM, Karina Lyzanets : Köszönöm July 6, 2025 at 3:42 AM, gutenkunstabelzoltan : Kesz July 6, 2025 at 3:56 AM, Vörös Geri : Katód slitt 2 nem jönnek a tálcák megnéznétek.köszi July 6, 2025 at 4:01 AM, gutenkunstabelzoltan : Assyn valami vana darukkal July 6, 2025 at 6:12 AM, Viktoriia Hleba : Sziasztok Anod slit 2 nincs AGV July 6, 2025 at 6:14 AM, MCS/RTD System : No material available. July 6, 2025 at 6:16 AM, Viktoriia Hleba : 3 slitter anode 2 nd r/w robot stop. Please check July 6, 2025 at 6:19 AM, Csanálosi Gábor FA : Done July 6, 2025 at 6:31 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.06. 9+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Denkó János Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(1): Boromisza Zoltán ------------ July 6, 2025 at 6:39 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 18р July 6, 2025 at 6:49 AM, MCS/RTD System : No material available July 6, 2025 at 9:09 AM, Aloshyn Yevhen : Anode press 2 R/W problem with robot July 6, 2025 at 9:10 AM, Csanálosi Gábor FA : Jövök July 6, 2025 at 9:23 AM, Viktor Vadas : @Rácz Dániel / FA 9-es szamu versenyzonk ujra megallt, elinditottam de valoszinuleg jobb lenne lerakni pihenni July 6, 2025 at 9:24 AM, Viktor Vadas : Most viszi a jumbot a raktarba July 6, 2025 at 9:24 AM, Rácz Dániel / FA : Rendben, mindjárt megyek. July 6, 2025 at 9:38 AM, Nagy Dávid 4 : Anod roll 4-es raktár kiált hibára help help köszönöm szépen July 6, 2025 at 9:39 AM, Csanálosi Gábor FA : Kész July 6, 2025 at 9:43 AM, Nagy Dávid 4 : Gyere vissza légyszíves mert nem jó köszönöm szépen July 6, 2025 at 9:47 AM, Csanálosi Gábor FA : Végleg kész, agv nem állt be rendesen. July 6, 2025 at 10:08 AM, Csanálosi Gábor FA : Szabira küldtem. July 6, 2025 at 10:08 AM, Nagy Dávid 4 : Anod press 2-es robot mikor lesz működő képes szeretnék érdeklődni köszönöm szépen July 6, 2025 at 10:10 AM, Rácz Dániel / FA : Először megkell találnunk mi okozza a hibát. Utána azt elkell hárítanunk. Utána fog működni. Időt nem tudok mondani. July 6, 2025 at 10:11 AM, Nagy Dávid 4 : Rendben köszönöm szépen az infót (thumbsup) July 6, 2025 at 10:12 AM, Viktor Vadas : Koszonom! July 6, 2025 at 10:12 AM, Szarka Adrián : Addig visszük manuálisan. Sikits kerlek ha kész van. Köszi 😘😘(thumbsup)(thumbsup)(thumbsup) July 6, 2025 at 10:13 AM, Rácz Dániel / FA : Rendben July 6, 2025 at 10:30 AM, Rácz Dániel / FA : Amit tudtunk végig ellenőriztünk, nem találjuk mi okozza a hibát. Másik csoportban kértünk segítséget. Köszönjük a türelmet. July 6, 2025 at 10:34 AM, 김대호 (Kim Dae Ho) : 안녕하세요 PM님 음극 프레스 2호기 R/W 이재기 문제가있어, AGV를 사용하지 못한다고 합니다. 대응 인력 지원부탁드립니다. @방혁 PM(Bang.Hyuk) FA July 6, 2025 at 10:46 AM, 방혁 PM(Bang.Hyuk) FA : 유선으로 연락드렸습니다 July 6, 2025 at 10:46 AM, 김대호 (Kim Dae Ho) : 감사합니다! 👍 July 6, 2025 at 11:14 AM, Dana Honak : 1 slitt cathode Robot nines tray ID! July 6, 2025 at 11:15 AM, Rácz Dániel / FA : Megyek July 6, 2025 at 11:19 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1 L/R Check please July 6, 2025 at 11:24 AM, MCS/RTD System : There is LR July 6, 2025 at 11:27 AM, Dana Honak : Sok szám! July 6, 2025 at 11:28 AM, Dana Honak : Nem indul el. July 6, 2025 at 11:28 AM, Csanálosi Gábor FA : On it July 6, 2025 at 11:39 AM, Csicskovics Balázs : Cathode press 7-re az AGV nem hozz anyagot. Légyszives nézzétek meg. Köszönöm July 6, 2025 at 12:06 PM, Anton Mashchenko : Cathode press 1-2-7, AGV not coming! Help! Thanks! July 6, 2025 at 12:14 PM, Rácz Dániel / FA : @mcs please check July 6, 2025 at 12:15 PM, Viktoriia Hleba : Cathode slitt 2 problem with conveyor July 6, 2025 at 12:16 PM, Viktoriia Hleba : please check July 6, 2025 at 12:16 PM, Csanálosi Gábor FA : Jövök July 6, 2025 at 12:29 PM, MCS/RTD System : PR CA 1: there's active LR PR CA 2: THERS ACTIVE JOB. RBC0500, IS NOW AT STKC32 P01. NO ISSUE FROM MCS. ACS PLEASE CHECK THIS ONE PR CA 7: RAISE LR July 6, 2025 at 12:29 PM, MCS/RTD System : @ACS PLEASE CHECK July 6, 2025 at 12:30 PM, Rácz Dániel / FA : Thank you, Sir 🫡 July 6, 2025 at 12:33 PM, Anton Mashchenko : Cathode press 1, R/W robot error! Help! July 6, 2025 at 12:48 PM, Csanálosi Gábor FA : Kész July 6, 2025 at 12:52 PM, Dana Honak : Cathode press 3 nines AGV 15 perc! July 6, 2025 at 12:54 PM, 김대호 (Kim Dae Ho) : Cathode press 1, 2, 3, 7 Why isn't the roll coming? July 6, 2025 at 12:55 PM, 김대호 (Kim Dae Ho) : Agv 롤 미반송으로 양극 프레스 1, 2, 7호기 비가동 발생중입니다. @방혁 PM(Bang.Hyuk) FA @김건희 July 6, 2025 at 12:56 PM, Szücs Géza FT-B : @mcs please check July 6, 2025 at 1:05 PM, Szarka Adrián : Katod roll raktárban, a rollok kint vannak a porton. Csak az agv nem jött értük. Agv kommunikáció újra indítás után, agv elindult. July 6, 2025 at 1:08 PM, Szarka Adrián : @Rácz Dániel / FA nézd meg Press 1 van e feladat July 6, 2025 at 1:09 PM, Szarka Adrián : Press 2 is újra indítva @Rácz Dániel / FA July 6, 2025 at 1:09 PM, Csicskovics Balázs : Cathode press 8 U/W robot abnormal position. Valaki jöjjön segíteni. Köszönöm szépen July 6, 2025 at 1:19 PM, 방혁 PM(Bang.Hyuk) FA : ㅠㅠㅠ이동중입니다 July 6, 2025 at 1:23 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B @Csanálosi Gábor FA Can you check AN SLIT2? July 6, 2025 at 1:23 PM, 김대호 (Kim Dae Ho) : Cathode agvs stopped again... July 6, 2025 at 1:23 PM, Viktoriia Hleba : Please check Agv 2 slitter . July 6, 2025 at 1:23 PM, Viktoriia Hleba : Agv stop. July 6, 2025 at 1:26 PM, Csanálosi Gábor FA : Omw July 6, 2025 at 1:35 PM, MCS/RTD System : Issue resolved. Carriers are getting assigned. July 6, 2025 at 1:38 PM, Csicskovics Balázs : Cathode press 3-ra még mindig nem érkezik az AGV.Nézzétrk meg légyszives. Köszönöm July 6, 2025 at 1:44 PM, Rácz Dániel / FA : Most megy a 16os AGV a C32es raktárba, túl sok feladat lett egyszerre idő mire utoléri magát a rendszer. 🥹 July 6, 2025 at 1:44 PM, Rácz Dániel / FA : @Csicskovics Balázs már a CA Press #7-re is megy az anyag. A CA Press #8-al mi legyen ? July 6, 2025 at 1:45 PM, Csicskovics Balázs : Maradhat. Nem baj, ha oda is visz anyagit July 6, 2025 at 1:45 PM, Rácz Dániel / FA : Rendben July 6, 2025 at 2:07 PM, Viktor Vadas : Sziasztok! Anod jumbo raktarban a 20-as AGV "Destination Update Failed" hibaval megakadt, utbaigazitast kernek! Koszonom! July 6, 2025 at 2:07 PM, Viktor Vadas : Mert lehet utba lesz a tobbinek kesobb July 6, 2025 at 2:08 PM, Viktoriia Hleba : Cathode slitt 2 problem with conveyor July 6, 2025 at 2:08 PM, Viktoriia Hleba : please check July 6, 2025 at 2:09 PM, Rácz Dániel / FA : Megyek July 6, 2025 at 2:27 PM, Rácz Dániel / FA : Köszönöm July 6, 2025 at 2:34 PM, Rácz Dániel / FA : Kész July 6, 2025 at 2:35 PM, Viktoriia Hleba : Thanks July 6, 2025 at 2:35 PM, Viktoriia Hleba : 4 slitt cathode u/w robot stop . Please check 🙏 July 6, 2025 at 2:36 PM, Szarka Adrián : Nem nyílt ki a levegő megint. Amíg a robot nincs hatra tolva nem tudjuk ra adni July 6, 2025 at 2:36 PM, Rácz Dániel / FA : Itt vagyok July 6, 2025 at 2:40 PM, 김대호 (Kim Dae Ho) : Anode sliter 2f conveyor error July 6, 2025 at 2:40 PM, Nagy Dávid 4 : Anod slitt konvejor megált help help köszönöm szépen July 6, 2025 at 2:40 PM, Rácz Dániel / FA : Jövök July 6, 2025 at 2:40 PM, Rácz Dániel / FA : Robot alaphelyzetben, ti jöttök. July 6, 2025 at 2:44 PM, Szarka Adrián : @Viktoriia Hleba July 6, 2025 at 2:45 PM, Rácz Dániel / FA : Kész 🫡 July 6, 2025 at 3:59 PM, 방혁 PM(Bang.Hyuk) FA : @FA please check Press AN AGV17 July 6, 2025 at 4:23 PM, Nagy Dávid 4 : Anod slit 2 nincs tarca help help köszönöm szépen July 6, 2025 at 4:23 PM, Rácz Dániel / FA : Itt vagyok csinálom már July 6, 2025 at 4:24 PM, Rácz Dániel / FA : Mindjárt megyek oda is July 6, 2025 at 4:29 PM, Rácz Dániel / FA : LTA0250 es tárca elakadt, de már megy is. 😉 July 6, 2025 at 4:40 PM, Rácz Dániel / FA : LTA0250 es tárca ismét elakadt. Help help 🤣 July 6, 2025 at 4:41 PM, Rácz Dániel / FA : Megyek 🫡 July 6, 2025 at 4:43 PM, Rácz Dániel / FA : Már megy is a tárca 🤗 July 6, 2025 at 4:54 PM, Szücs Géza FT-B : @Varga Tamás Powder légyszives itt kérj segítséget @MCS/RTD System -től a poros csoportba nem tudom behívni őt July 6, 2025 at 4:57 PM, MCS/RTD System : Hi, do I need to step in for any issues ? July 6, 2025 at 4:57 PM, Varga Tamás Powder : @MCS/RTD System hello. we have called material to port E1PLA041_P02 on row 4. the light is flashing blue and it indicates there is no material in the warehouse. please check if there is any material left. 112-00247A (M36H) thank you very much July 6, 2025 at 5:01 PM, 김대호 (Kim Dae Ho) : Cathode sliter 1, 2 L/R Check please July 6, 2025 at 5:03 PM, MCS/RTD System : There's no material available for 112-00247A July 6, 2025 at 5:04 PM, MCS/RTD System : There's LR for both. No material available July 6, 2025 at 5:07 PM, MCS/RTD System : Just wanted to re-confirm if the product definition ID is 112-00242A for E1PLA041_P02 July 6, 2025 at 5:13 PM, Viktoriia Hleba : 2 slitter anode nincs Agv please check July 6, 2025 at 5:15 PM, MCS/RTD System : This message was deleted. July 6, 2025 at 5:15 PM, MCS/RTD System : No search lot July 6, 2025 at 5:16 PM, Viktoriia Hleba : 1-2 slitter cathode nincs Agv please check July 6, 2025 at 5:17 PM, MCS/RTD System : CA SL 1: NO material CA SL 2: there's active job , is on VC 12 July 6, 2025 at 5:19 PM, Czeilinger Krisztián : @Viktoriia Hleba please Come to Cathode slitt 4. Thank you. July 6, 2025 at 5:29 PM, Nagy Dávid 4 : Anod slit 2 problem robot R/W help help help köszönöm szépen July 6, 2025 at 5:30 PM, Rácz Dániel / FA : Jövünk July 6, 2025 at 5:35 PM, Rácz Dániel / FA : Itt vagyunk mi a baj ? July 6, 2025 at 5:36 PM, Nagy Dávid 4 : Nincsen baj működik minden???? July 6, 2025 at 5:36 PM, Rácz Dániel / FA : Részünkről igen July 6, 2025 at 5:38 PM, Nagy Dávid 4 : Okés köszönöm szépen July 6, 2025 at 5:48 PM, Mohammad Amir : @FA Please check E0CNVC51_08_52_/53 there is Run Time over error and it has blocked materials recovery. Thank you very much! July 6, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Gutenkunst Ábel Zoltán Benczik Ádám Bonnyai Ákos ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 6:50 PM, Powder tréner : Sziasztok szeretnék kérni segítséget a poron anód raktár nem adja ki az anyagot E1PLA041_P01 portra July 6, 2025 at 6:51 PM, Mohammad Amir : Good evening, Sure, Checking! July 6, 2025 at 6:53 PM, Mohammad Amir : For E1PLA041_P01, Warehouse is not issuing the materials because we didn't receive Load request for materials. Last task was completed at 18:42. Please press LR again. Currently we have 37 materials available to be tranferred. Thank you very much! July 6, 2025 at 7:18 PM, Anastasiia~~ : Hello, 1-2 slitter Anode nincs Agv please check July 6, 2025 at 7:18 PM, Mohammad Amir : Sure, Checking! July 6, 2025 at 7:19 PM, Mohammad Amir : For Anode Slitter -2, AGV#8 on the way. Thank you! July 6, 2025 at 7:19 PM, Mohammad Amir : For Slitter Anode-1, Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 6, 2025 at 7:19 PM, Margaret : Hello. Come pls anode slitt 5 robot problem July 6, 2025 at 7:21 PM, adambenczik : Checking July 6, 2025 at 7:27 PM, gutenkunstabelzoltan : Kesz July 6, 2025 at 7:33 PM, Anastasiia~~ : Thanks July 6, 2025 at 7:33 PM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any further assistance. July 6, 2025 at 7:45 PM, Powder tréner : Hello,Katód raktár nem adja ki az anyagot E1PLC011_P01 és E1PLC011_P02 portokra.Nézétek rá.Köszönöm. July 6, 2025 at 7:45 PM, Mohammad Amir : Sure, Checking July 6, 2025 at 7:46 PM, adambenczik : Az egyik darunak kint maradt a villája, már úton vagyunk July 6, 2025 at 7:46 PM, Mohammad Amir : There is issue in E0STKC12 that's why powder materials travefer is getting delayed. I already informed the FA team in appropriate group. Thank you very much! July 6, 2025 at 8:05 PM, adambenczik : Kész July 6, 2025 at 8:08 PM, Mohammad Amir : Issue has been resolved ✅ Now powder materials on the way. Thank you very much! July 6, 2025 at 8:09 PM, Vörös Geri : Katód slitt 2 re nem jönnek a tálcák megnéznétek.köszi July 6, 2025 at 8:09 PM, Mohammad Amir : STKC52_C01/C02 is inactive that's why you faced such situation. I already informed FA about this issue. Thank you very much! July 6, 2025 at 9:53 PM, Margaret : Anod problem with conveyor July 6, 2025 at 9:58 PM, 지석범PM (이반차FA) : @Mohammad Amir please change a job to other stk what agv#2 have There is full of roll Its anode side July 6, 2025 at 9:59 PM, Mohammad Amir : Sure Checking! July 6, 2025 at 10:02 PM, Mr.Miti (미티) FA : I modified July 6, 2025 at 10:02 PM, Mr.Miti (미티) FA : I modified July 6, 2025 at 10:03 PM, Mohammad Amir : Hello, I don't see any modification,it still going to its original destination STKA35. I am changing . Thank you very much! July 6, 2025 at 10:04 PM, Szeitz Flórián : Sziasztok! Anód roll raktár 5 Stokerbe fent akadás van . July 6, 2025 at 10:05 PM, Mohammad Amir : Now, Destination has been modified to STKA31. Thank you very much! July 6, 2025 at 10:07 PM, Mr.Miti (미티) FA : I deleted the task and gave him a new one in acs. July 6, 2025 at 10:08 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 10:08 PM, Mr.Miti (미티) FA : and it didn't move because the transfer had to be switched. July 6, 2025 at 10:12 PM, Margaret : Come pls anode slitt 5 robot problem July 7, 2025 at 12:28 AM July 7, 2025 at 12:28 AM, Anastasiia~~ : Anod slitt1 ninsc AGV 15p July 7, 2025 at 12:30 AM, Mohammad Amir : For Slitter Anode-1, Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 7, 2025 at 12:46 AM, Mohammad Amir : Update:- As now material is available so Roll RBA1997 on AGV#11 on the way to Anode Slitter -1. ✅ Thank you very much! July 7, 2025 at 12:46 AM, Anastasiia~~ : Anod Slitt 2 ninsc AGV 13p July 7, 2025 at 12:46 AM, Mohammad Amir : AGV#8 on the way with Roll ✅ Thank you very much! July 7, 2025 at 1:07 AM, Oleksii Krasnoshchok : Anode press 7 long time waiting Agv u/w July 7, 2025 at 1:07 AM, Mohammad Amir : AGV#15 on the way with Roll ✅ Thank you! July 7, 2025 at 1:10 AM, Mohammad Amir : AGV#15 has successfully arrived with Roll RBA0834 at U/W of Anode press -7 ✅. There was an issue with AGV that's why you witnessed delay. Thank you very much! July 7, 2025 at 1:36 AM, Anastasiia~~ : Anod slitt1 ninsc AGV 20p July 7, 2025 at 1:37 AM, Mohammad Amir : AGV#19 on the way with Roll ✅. Thank you! July 7, 2025 at 2:37 AM, Mohammad Amir : This message was deleted. July 7, 2025 at 2:42 AM, Mohammad Amir : @FA @adambenczik Please check STKC52_C01/C02 ,these cranes are inactive without error and because of this issue ,it can cause shortages of Empty trays in future. So,Please make it active on priority. Thank you very much! July 7, 2025 at 2:43 AM, Mohammad Amir : Crane active now ✅ Thank you very much! July 7, 2025 at 2:43 AM, adambenczik : Your welcome 👍 July 7, 2025 at 3:08 AM, Kaniz / Ivancsa FA : Can anyone come in the electrode coating anode side,there is problem with AGV charger.. July 7, 2025 at 3:43 AM, Anastasiia~~ : Anod slitter2 no tray, please check July 7, 2025 at 3:44 AM, Mohammad Amir : @FA @adambenczik Please check STKA52_C01/C02 ,these cranes are inactive without error and because of this issue ,there js shortages of Empty trays. So,Please make it active on priority. Thank you very much! July 7, 2025 at 3:44 AM, Mohammad Amir : @Anastasiia~~ Because of this issue you witnessed shortages of Empty trays on Slitter -2 Anode. Thank you very much! July 7, 2025 at 3:45 AM, adambenczik : Solved July 7, 2025 at 3:45 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 3:46 AM, Mohammad Amir : Issue has been resolved ✅ Empty trays on the way. I am monitoring. Thank you very much! July 7, 2025 at 6:59 AM, Czél Tamás : Sziasztok Katód Slitt 1-ről a 2nd RW-ről nem vitte ez az anyagot a robot. Kérlek nézzétek meg Köszönöm July 7, 2025 at 7:00 AM, Skwarek Tibor : Megyünk July 7, 2025 at 7:27 AM, 김대호 (Kim Dae Ho) : Cathode press 1 9, 16 agv error check please July 7, 2025 at 7:29 AM, Viczai Tamás : Megyek July 7, 2025 at 7:50 AM, Oláh Rajmund : Gyertek legyszives cathode press 2 AGV problema July 7, 2025 at 7:52 AM, Simon Attila F. A. : This message was deleted. July 7, 2025 at 7:53 AM, Simon Attila F. A. : Kész. July 7, 2025 at 9:10 AM, 김대호 (Kim Dae Ho) : Cathode press 7 U/w error check please @fa July 7, 2025 at 9:10 AM, Simon Attila F. A. : Im here. July 7, 2025 at 9:19 AM, Simon Attila F. A. : Solved. July 7, 2025 at 9:24 AM, Czél Tamás : Sziasztok Anód Press 2 mögött 2 AGV zavarja egymást. Kérlek nézzétek meg Köszönöm July 7, 2025 at 10:23 AM, Anton Mashchenko : Cathode press 7, U/W robot error! Help! July 7, 2025 at 10:23 AM, Simon Attila F. A. : Im here. July 7, 2025 at 10:24 AM, 김건희 : @Kim Dongju(김동주)_FA 음극 프래스 2호기 R/W 조치 인원 언제 오실 수 있으실까요 July 7, 2025 at 10:28 AM, Simon Attila F. A. : Solved. July 7, 2025 at 10:31 AM, Kim Dongju(김동주)_FA : @Simon Attila F. A. Kérjük, ellenőrizze a 2-es negatív nyomást. July 7, 2025 at 10:33 AM, Simon Attila F. A. : On the way. July 7, 2025 at 10:34 AM, Simon Attila F. A. : I can't see any problem. July 7, 2025 at 10:35 AM, Simon Attila F. A. : Ca press 2 is working. July 7, 2025 at 10:36 AM, Kim Dongju(김동주)_FA : Ok. Thank you. July 7, 2025 at 10:48 AM, 김대호 (Kim Dae Ho) : Anod sliter 3 Run time over error check please July 7, 2025 at 10:49 AM, Simon Attila F. A. : I coming. July 7, 2025 at 10:52 AM, Simon Attila F. A. : Solved. July 7, 2025 at 10:54 AM, Oláh Rajmund : Gyertek légyszives anode roll raktárba, ki állt hibára az egyik daru July 7, 2025 at 10:57 AM, Simon Attila F. A. : Jövök. July 7, 2025 at 10:58 AM, Simon Attila F. A. : Üzemel! July 7, 2025 at 11:04 AM, 김대호 (Kim Dae Ho) : Anodw sliter 5 Check please July 7, 2025 at 11:05 AM, duzzaman Md (MCS) : There is no LR July 7, 2025 at 11:07 AM, duzzaman Md (MCS) : @FA Please check E0STK001_C01 there is MCP safety relay off error. Thank you very much! July 7, 2025 at 11:08 AM, Simon Attila F. A. : Manual material moving! July 7, 2025 at 11:08 AM, Simon Attila F. A. : This message was deleted. July 7, 2025 at 11:27 AM, Zsmenyák György : Sziasztok ! Katód Press 3 nem jön anyag July 7, 2025 at 11:28 AM, Simon Attila F. A. : Most áll be. July 7, 2025 at 1:14 PM, 김대호 (Kim Dae Ho) : Cathode sliter 4 Can you send the robot to the origin? July 7, 2025 at 1:14 PM, Skwarek Tibor : Yes July 7, 2025 at 1:15 PM, 김대호 (Kim Dae Ho) : Thank you ! July 7, 2025 at 1:22 PM, Skwarek Tibor : You re welcome July 7, 2025 at 2:08 PM, 김대호 (Kim Dae Ho) : Cathode sliter 4 Agv No. 1 is stopped without alarm. July 7, 2025 at 2:14 PM, Skwarek Tibor : Checking July 7, 2025 at 2:15 PM, Skwarek Tibor : Done July 7, 2025 at 2:36 PM, Czél Tamás : Sziasztok. Katód Slitt 3 transfer hibánk van, kérlek nézzetek rá Köszönöm July 7, 2025 at 2:36 PM, Skwarek Tibor : Itt vagyok July 7, 2025 at 3:29 PM, Zsmenyák György : Hali . Az egyes AGV megakadt a4 press mellett katódon July 7, 2025 at 3:30 PM, Simon Attila F. A. : Elindítottam. July 7, 2025 at 3:30 PM, Simon Attila F. A. : Ja, másik volt. Most megyek. July 7, 2025 at 3:31 PM, Simon Attila F. A. : Tibi kolléga csinálja. July 7, 2025 at 3:32 PM, Skwarek Tibor : Kész July 7, 2025 at 3:59 PM, Zsmenyák György : Köszi szépen July 7, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 7, 2025 at 6:26 PM, ~Lidiia~리디 ~ : @FA Hello, An error occurred on the conveyor at slitt 4 cathode. The conveyor stopped. Please check this is. Thank you July 7, 2025 at 6:27 PM, Oláh András : Coming July 7, 2025 at 7:13 PM, 지찬우 : Anode press2 RW Please check the transfer error July 7, 2025 at 7:15 PM, Oláh András : Coming July 7, 2025 at 7:47 PM, 임동현 : Cathode sliter 2nd floor conveyor problem caused tray to stop July 7, 2025 at 7:48 PM, Oláh András : Checking July 7, 2025 at 7:54 PM, Kozma István : Anod 1 coater agv problema! Gyertek legyszi! Koszi! July 7, 2025 at 7:58 PM, Kozma István : SOS July 7, 2025 at 7:58 PM, Somoskövy Martin : Sziasztok. Anode Press 2 R/W-be nem tud beállni az AGV. Ránéznétek? Köszönöm. July 7, 2025 at 7:58 PM, Oláh András : Megyek coatingra először July 7, 2025 at 8:01 PM, 김지수PM(Gyuri)_FA : @fa Please check e0cnvc51 8021track > full carrier is not moving July 7, 2025 at 8:02 PM, Oláh András : The lift doesnt moving. Checking now July 7, 2025 at 8:11 PM, Somoskövy Martin : Már nem kell jönni. Sikerült elvinnie. July 7, 2025 at 8:50 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 7, 2025 at 8:52 PM, Kozma István : Bocsi, megoldódott July 7, 2025 at 9:45 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 7, 2025 at 9:46 PM, ~Lidiia~리디 ~ : Cathode slitt 4 U/W B side problem transfer, please come and check this. Thank you July 7, 2025 at 9:47 PM, 최재균 : @FA 전극 코팅 음극 2 라인 AGV 문제가 발생 했는데 현장에 조치 해줄수 있는분 계신가요 ? July 7, 2025 at 9:49 PM, 김지수PM(Gyuri)_FA : @Oláh András Andras, can you check the AGV? > coating anode line2 Thanks! July 7, 2025 at 9:49 PM, Oláh András : No, we are at powder load now. @Dániel Hufnágel July 7, 2025 at 9:51 PM, 최재균 : 이재기 위치가 틀어져서 2nd R/w 롤이 안착이 잘못 되었어요. July 7, 2025 at 9:54 PM, 임동현 : Cathode slitt unit 4 U/W stopped July 7, 2025 at 10:05 PM, Dániel Hufnágel : Just a moment please July 7, 2025 at 10:05 PM, 지찬우 : 음극프레스 2호기 RW AGV Retry 지속 발생중인데 확인 부탁드립니다 July 7, 2025 at 10:30 PM, ~Lidiia~리디 ~ : Cathode slitt 4 problem with U/W still not solved please check this. Thank you July 7, 2025 at 10:33 PM, 지찬우 : 양극슬리터 4호기 UW 이재기 1시간 가량 멈춰있습니다 확인 부탁드립니다 July 7, 2025 at 11:46 PM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 8, 2025 at 12:53 AM July 8, 2025 at 12:53 AM, Farkas Dániel Elekt : Sos segitseget kernek anod2 coatinra log a jumbo a levegobe a roboton July 8, 2025 at 12:54 AM, Oláh András : Jövünk July 8, 2025 at 2:39 AM, Semenszki Péter : Sziasztok! Coating anód 1-re kitudnátok jönni sos-ban July 8, 2025 at 2:39 AM, Szabadi Miki : Uton July 8, 2025 at 3:17 AM, Kozma István : Anod 2 coater agv problema! Gyertek legyszi! Koszi! July 8, 2025 at 3:18 AM, Novák Károly F. A. : Megyünk July 8, 2025 at 4:53 AM, Kozma István : Katód 1 coater agv problema! Gyertek legyszi! Koszi! July 8, 2025 at 5:29 AM, ~Lidiia~리디 ~ : Cathode slitt 2 there was an error with the transfer on the conveyor. Please check this. Thank you July 8, 2025 at 5:56 AM, 정연동 left this chatroom. July 8, 2025 at 6:09 AM, 김대호 (Kim Dae Ho) : Could you help me? @fa July 8, 2025 at 6:09 AM, Skwarek Tibor : Yes July 8, 2025 at 6:13 AM, Skwarek Tibor : Done July 8, 2025 at 7:13 AM, Czél Tamás : Sziasztok Valaki tudna jönni cathode Slitt 4-re pls? July 8, 2025 at 7:13 AM, Simon Attila F. A. : Megyünk. July 8, 2025 at 8:18 AM, 박정근(Park) : Cathode Coater 1 Line Not moving AGV pls come.. July 8, 2025 at 8:20 AM, Skwarek Tibor : Done July 8, 2025 at 8:20 AM, Irinyi László : Szervusztok! Az anód press 1- 2-es gépek mögött elakadt a 25-ös számú AGV. July 8, 2025 at 8:20 AM, Skwarek Tibor : Megyek July 8, 2025 at 8:57 AM, 김대호 (Kim Dae Ho) : Anode press 2 L/R Check please July 8, 2025 at 8:57 AM, Shakir (MCS) : Checking July 8, 2025 at 9:01 AM, Shakir (MCS) : @Simon Attila F. A. Please check E0STKA33_P01, Is there any carrier there, SCS showing carrier but MCS empty-and blocked others. Thank you July 8, 2025 at 9:02 AM, Simon Attila F. A. : I check. July 8, 2025 at 9:11 AM, Simon Attila F. A. : I make manual order this port. Some minutes and solve the problem. July 8, 2025 at 9:24 AM, Simon Attila F. A. : All ok. July 8, 2025 at 9:25 AM, Shakir (MCS) : AGV19 assigned and on the way to Press2 AN Thank you July 8, 2025 at 9:26 AM, Shakir (MCS) : Thank you July 8, 2025 at 11:40 AM, Mucsenbacher_Jozsef : Sziasztok . Segítséget szeretnénk kerni a Anod 1 coating 1 R/w hez July 8, 2025 at 11:41 AM, Simon Attila F. A. : Kész. July 8, 2025 at 11:47 AM, 김대호 (Kim Dae Ho) : Anode presa 2 Please check Agv number 7 July 8, 2025 at 11:47 AM, Simon Attila F. A. : I check... July 8, 2025 at 11:47 AM, Simon Attila F. A. : Solved. July 8, 2025 at 1:14 PM, Shakir (MCS) : @FA Please check E0CNVA51_06152 there is Run Time over error. Thank you July 8, 2025 at 1:19 PM, Skwarek Tibor : Checking July 8, 2025 at 1:22 PM, Skwarek Tibor : Done July 8, 2025 at 1:57 PM, 류종석(RyuJongSeok) : 이재기 제어 담당자분 코팅 음극 1라인으로 와주시면 감사하겠습니다. July 8, 2025 at 2:00 PM, HONG SUK DO[홍석도] 제어 : 네 확인했습니다 July 8, 2025 at 2:26 PM, Czél Tamás : Sziasztok Katód Press 7-esen megállt a robot, rajta az anyaggal. Kérlek nézzétek meg Köszönöm July 8, 2025 at 2:26 PM, Skwarek Tibor : Megyek July 8, 2025 at 2:54 PM, Shakir (MCS) : @FA Please check E0CNVA51_06018 there is Run Time over error. Thank you July 8, 2025 at 2:55 PM, Simon Attila F. A. : We will be there soon. July 8, 2025 at 3:06 PM, Simon Attila F. A. : Done. July 8, 2025 at 3:27 PM, Simon Attila F. A. : @Shakir (MCS) please check this order on E0STKA32-p01 RBA0113 July 8, 2025 at 3:29 PM, Sazzad Bhai SKon : Vehicle 08 coming July 8, 2025 at 3:32 PM, Simon Attila F. A. : Thank you for help July 8, 2025 at 3:33 PM, Shakir (MCS) : The carrier is blocked by RBA0124 July 8, 2025 at 3:35 PM, Simon Attila F. A. : No, first out this bobin (RBA0113) and nexttime RBA0124 go in to the warehouse. July 8, 2025 at 3:35 PM, Simon Attila F. A. : Now start the agv08 July 8, 2025 at 3:35 PM, Simon Attila F. A. : Thanks! July 8, 2025 at 3:36 PM, Shakir (MCS) : Yes, AGV unloading July 8, 2025 at 3:53 PM, Simon Attila F. A. : Thanks for help! July 8, 2025 at 4:25 PM, 김대호 (Kim Dae Ho) : Cathode agv13 is stopped. There is no alarm July 8, 2025 at 4:27 PM, 김대호 (Kim Dae Ho) : Why does it stop while returning the roll without an agv alarm? Please confirm July 8, 2025 at 4:27 PM, KIM SEYEON [김세연]_FA : @Simon Attila F. A. could you check it? July 8, 2025 at 4:31 PM, Simon Attila F. A. : Yes, AGV13 is moving now. July 8, 2025 at 4:31 PM, Simon Attila F. A. : Sorry, check again... July 8, 2025 at 4:36 PM, Simon Attila F. A. : Avlgv13 is waiting other agv, then stuck. July 8, 2025 at 4:36 PM, Simon Attila F. A. : My colleague is already taking care of it. July 8, 2025 at 4:55 PM, Skwarek Tibor : @Shahbaz 샤바즈 MCS/RTD could you please check if theres available material for AN slitt 2 and 3? Theres no agv coming. July 8, 2025 at 4:56 PM, Shakir (MCS) : Checking July 8, 2025 at 4:58 PM, Shakir (MCS) : Available lot Slit 2 AN : 06 Slitt 3 AN :00 Thank you July 8, 2025 at 4:58 PM, Skwarek Tibor : Thank You! July 8, 2025 at 5:00 PM, 김대호 (Kim Dae Ho) : But why isn't Anode Sliter 2 roll coming? July 8, 2025 at 5:01 PM, Shakir (MCS) : Checking July 8, 2025 at 5:01 PM, 김대호 (Kim Dae Ho) : I confirmed to Tibor that he is coming now. Thank you July 8, 2025 at 5:03 PM, Shakir (MCS) : AGV01 on the way to slitt2 July 8, 2025 at 5:03 PM, Simon Attila F. A. : The buffer is busy, just acs not see the bumber... July 8, 2025 at 5:03 PM, Skwarek Tibor : L/R been restarted July 8, 2025 at 5:03 PM, Simon Attila F. A. : This message was deleted. July 8, 2025 at 5:03 PM, Simon Attila F. A. : This message was deleted. July 8, 2025 at 5:03 PM, Shakir (MCS) : Yes, material on the way July 8, 2025 at 5:04 PM, 김대호 (Kim Dae Ho) : Anode press 2, 7, and 8 are also not coming? July 8, 2025 at 5:05 PM, Shakir (MCS) : Yes because of STKA31 OOS for more than 1 hours July 8, 2025 at 5:05 PM, Shakir (MCS) : @FA team working on it July 8, 2025 at 5:05 PM, 김대호 (Kim Dae Ho) : Yes, I checked. Thank you for your response. 👍 July 8, 2025 at 5:06 PM, Shakir (MCS) : Should I cancelled the job so material will move from other alternate STK?? July 8, 2025 at 5:08 PM, 김대호 (Kim Dae Ho) : Will there be any action until the night shift and shift? Then we can wait. July 8, 2025 at 5:10 PM, Shakir (MCS) : Okay , I will deliver the message to my night shift colleague. Thank you July 8, 2025 at 5:10 PM, 김대호 (Kim Dae Ho) : Thank you so much. 👍 July 8, 2025 at 5:53 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(1): Novák Károly Elektróda:(2) Oláh András, Szabadi Miklós, Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 8, 2025 at 5:55 PM, K.Krisz Coating : An 1 sos krrek valakit,1 r/w daru lefagyott,fogja a jumbot,a chuck nem nyit. July 8, 2025 at 6:00 PM, Szabadi Miki : Uton July 8, 2025 at 6:09 PM, Kozma István : Katód 1 coater agv problema! Gyertek legyszi! Koszi! July 8, 2025 at 6:27 PM, 지찬우 : Anode press2 UW LR Check please July 8, 2025 at 6:29 PM, Mohammad Amir : Good evening, Please press LR again there was issue with Last LR . Thank you very much! July 8, 2025 at 6:30 PM, Oláh András : We working on A31. ☝️ July 8, 2025 at 6:38 PM, Karina Lyzanets : Sziasztok Slitt Anode 2 nincs AGV 30 perc July 8, 2025 at 6:39 PM, Mohammad Amir : Checking July 8, 2025 at 6:39 PM, Mohammad Amir : Good evening, Please press LR again there was issue with Last LR . Thank you very much! July 8, 2025 at 6:41 PM, Karina Lyzanets : Okay, thank you very much July 8, 2025 at 6:41 PM, Dániel Hufnágel : @Mohammad Amir Please change E0STKA31 status, is still under maintenance, and i do not now when we can start it! July 8, 2025 at 6:42 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 6:42 PM, Mohammad Amir : Good evening, Would you like me to make it OOS so that jobs will be not assigned from this STK? Thank you very much! July 8, 2025 at 6:43 PM, Dániel Hufnágel : Yes thank you, and please also delete E0STKA31 jobs please from SCS and MCS also July 8, 2025 at 6:43 PM, Mohammad Amir : Sure working on it. July 8, 2025 at 6:43 PM, Dániel Hufnágel : Thank you! July 8, 2025 at 6:48 PM, Mohammad Amir : Issue has been resolved ✅. Feel free to contact me again when you would like to make this STK In-service. Thank you very much! July 8, 2025 at 6:48 PM, Dániel Hufnágel : Thank you, i will! July 8, 2025 at 6:48 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 6:55 PM, Dániel Hufnágel : @Mohammad Amir Please make it In-service mode E0STKA31! July 8, 2025 at 6:56 PM, Mohammad Amir : Sure , working on it. July 8, 2025 at 6:56 PM, Dániel Hufnágel : Thank you! July 8, 2025 at 6:57 PM, Mohammad Amir : Issue has been resolved ✅ Feel free to contact me again if you need any further assistance. Thank you very much! July 8, 2025 at 6:58 PM, Karina Lyzanets : @Mohammad Amir this problem is still not solved July 8, 2025 at 6:58 PM, Mohammad Amir : Issue has been resolved ✅ AGV#25 on the way. Thank you very much! July 8, 2025 at 7:09 PM, Karina Lyzanets : Cathode Slitt 1-2 nincs AGV 20 perc July 8, 2025 at 7:10 PM, Mohammad Amir : For Slitter Cathode 1 and 2, Unfortunately we don't have enough Materials in warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 8, 2025 at 7:31 PM, Karina Lyzanets : Slitt Cathode 3 Transfer problem R/W July 8, 2025 at 7:31 PM, Karina Lyzanets : Köszönöm szépen July 8, 2025 at 7:31 PM, Oláh András : Megyünk July 8, 2025 at 7:37 PM, Mohammad Amir : This message was deleted. July 8, 2025 at 7:37 PM, Mohammad Amir : Update :- Now issue has been resolved ✅ Roll RBC0100 on the way to slitter cathode-2 ✅ on AGV#1. Thank you very much! July 8, 2025 at 7:39 PM, Karina Lyzanets : Thank you July 8, 2025 at 7:40 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you need further assistance. July 8, 2025 at 9:04 PM, Karina Lyzanets : Slitt Cathode 4 mögött megállt a conveyor Tálca nem jó pozicóban van July 8, 2025 at 9:04 PM, Karina Lyzanets : Köszönöm szépen July 8, 2025 at 9:07 PM, Karina Lyzanets : @Mohammad Amir Slitt Cathode 3 no material Please check July 8, 2025 at 9:07 PM, Mohammad Amir : Sure, checking! July 8, 2025 at 9:08 PM, Mohammad Amir : For Slitter Cathode 3, Unfortunately we don't have enough Materials in the warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 8, 2025 at 9:11 PM, Karina Lyzanets : Thank you very much July 8, 2025 at 9:11 PM, Mohammad Amir : You are welcome! July 8, 2025 at 9:17 PM, Mohammad Amir : @FA Please check E0CNVC51_08_049/50 there is INV-01 Run Time over error and it is causing blockage in materials recovery resulting material traffic on the CNV. Thank you very much! July 8, 2025 at 10:11 PM, 임동현 : Please check the error in the anode roll warehouse #4 July 8, 2025 at 10:43 PM, Karina Lyzanets : @Mohammad Amir Anode Slitt 1 no AGV 20 min July 8, 2025 at 10:43 PM, Mohammad Amir : Now, AGV#15 on the way ✅ Thank you very much! July 8, 2025 at 11:55 PM, Karina Lyzanets : Slitt Anode 3 Transfer problem R/W July 8, 2025 at 11:58 PM, Karina Lyzanets : Köszönöm szépen July 9, 2025 at 12:04 AM July 9, 2025 at 12:04 AM, 카스텔 발라지 F.A. : Solved July 9, 2025 at 12:07 AM, Karina Lyzanets : Thank you! July 9, 2025 at 12:22 AM, 임동현 : Please check the error in the Cathode roll warehouse #2 July 9, 2025 at 1:06 AM, Kozma István : Katód 1 coater agv problema! Gyertek legyszi! Koszi! July 9, 2025 at 1:07 AM, Oláh András : Úgy látom már megy July 9, 2025 at 1:08 AM, Kozma István : Nem megy July 9, 2025 at 2:03 AM, Kozma István : Katód 1 coater transzfer v agv problema! Gyertek legyszi! Koszi! July 9, 2025 at 2:09 AM, Kozma István : Transzfer! July 9, 2025 at 3:15 AM, Anastasiia~~ : hello to the anode slitt 3 no trays, please check this July 9, 2025 at 3:15 AM, Oláh András : Checking July 9, 2025 at 3:16 AM, Mohammad Amir : This message was deleted. July 9, 2025 at 3:16 AM, Mohammad Amir : Please check tray located E0CNVA51_06_034 it is not moving and blocking empty trays delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! July 9, 2025 at 3:17 AM, Anastasiia~~ : Thanks July 9, 2025 at 5:04 AM, 임동현 : Please check the error in the anode roll warehouse #2 July 9, 2025 at 5:37 AM, 김지수PM(Gyuri)_FA : @fa Please check e0cnvc51 > 8052 track. Thanks July 9, 2025 at 6:11 AM, Rácz Dániel / FA : Solved July 9, 2025 at 6:21 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.09. 8+1/12+1 Tech, 0Sl, 1Sup. Overtime(0): Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(1): Pintye Miklós Shift Change(0): --------------- Electrode(3): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, --------------- Assy GF (2): Kovács Ágnes, CsanálosiGábor, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Takács Ádám --------------- Form/Modul(1): Gerbovits Ke July 9, 2025 at 6:36 AM, Dana Honak : 2 slitt cathode r/w robot Problema STOP! July 9, 2025 at 6:37 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA gabor can you check it? July 9, 2025 at 6:38 AM, Csanálosi Gábor FA : @Böröcz Tamás , @Rácz Dániel / FA , @Czeilinger Krisztián are on electrode today July 9, 2025 at 6:39 AM, Csanálosi Gábor FA : I bet they are on it July 9, 2025 at 6:48 AM, Aloshyn Yevhen : Anode press 1 R/W problem with robot July 9, 2025 at 6:57 AM, Czeilinger Krisztián : Solved. July 9, 2025 at 7:38 AM, Csicskovics Balázs : Cathode press 7 R/W robot probléma. Gyertek légyszives. Köszönöm July 9, 2025 at 7:43 AM, Rácz Dániel / FA : A 7es AGV nem tud beállni megfelelően, elküldtem onnan. A 13as AGV fogja leszedni. July 9, 2025 at 8:08 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 30p July 9, 2025 at 8:08 AM, Shakir (MCS) : Checking July 9, 2025 at 8:09 AM, Shakir (MCS) : AGV18 on the way to slitt1 AN Thank you July 9, 2025 at 8:27 AM, 박정근(Park) : pls come Cathode Coater 1Line July 9, 2025 at 8:27 AM, Böröcz Tamás : Omw July 9, 2025 at 8:33 AM, Böröcz Tamás : Solved July 9, 2025 at 8:56 AM, Viktoriia Hleba : Anod slit 2 nincs tarca July 9, 2025 at 8:58 AM, Rácz Dániel / FA : Lassan mennek, nagyon lassan. July 9, 2025 at 9:26 AM, Böröcz Tamás : @mcs Please check the empty tray supply for CNVA51 July 9, 2025 at 9:26 AM, Shakir (MCS) : Checking July 9, 2025 at 9:29 AM, Shakir (MCS) : There is enough empty tray on CNVA51, however could you please check E0CNVA51_06_148, there is full tray not moving for long time. Thank you July 9, 2025 at 9:32 AM, Shakir (MCS) : Sorry it was solved already July 9, 2025 at 9:33 AM, Shakir (MCS) : Empty tray supply is good, Trays coming from both STK ✅ July 9, 2025 at 9:57 AM, Csicskovics Balázs : Cathode press 7 nem jön az AGV kérlek nézzétek meg. Köszönöm July 9, 2025 at 9:59 AM, Böröcz Tamás : @Shakir (MCS) July 9, 2025 at 9:59 AM, Böröcz Tamás : Please July 9, 2025 at 9:59 AM, Shakir (MCS) : Checking already July 9, 2025 at 10:05 AM, Shakir (MCS) : Could you please press LR again July 9, 2025 at 10:06 AM, Shakir (MCS) : Job initiated for Press7, Thanks July 9, 2025 at 10:07 AM, Böröcz Tamás : RBC0924? July 9, 2025 at 10:08 AM, Shakir (MCS) : This message was deleted. July 9, 2025 at 10:09 AM, Rácz Dániel / FA : Cathode side July 9, 2025 at 10:09 AM, Shakir (MCS) : RBC0155 assined July 9, 2025 at 10:11 AM, Böröcz Tamás : There are 2 jumbo in C32 transfer RBC0139 and RBC0301 RBC0139 has no job but it is on transfer and RBC0301 waiting on the buffer to be stored July 9, 2025 at 10:12 AM, Shakir (MCS) : I have created job for RBC0139 to other STK. July 9, 2025 at 10:12 AM, Böröcz Tamás : RBC0924 and RBC0155 is waiting for the transfer July 9, 2025 at 10:15 AM, Böröcz Tamás : Thank you July 9, 2025 at 10:23 AM, Shakir (MCS) : This message was deleted. July 9, 2025 at 10:23 AM, Shakir (MCS) : Now all good, For press7 CA, AGV07 on the way. Thank you July 9, 2025 at 2:33 PM, Nagy Dávid 4 : Anod slitt 3 Runtimeover error help help köszönöm szépen July 9, 2025 at 2:34 PM, Rácz Dániel / FA : Megy is July 9, 2025 at 3:42 PM, Viktoriia Hleba : anod slitt 2 nincs AGV 15p July 9, 2025 at 3:42 PM, Shakir (MCS) : Checking July 9, 2025 at 3:43 PM, Shakir (MCS) : AGV01 on the way to slitt2 An Thank you July 9, 2025 at 3:44 PM, Böröcz Tamás : Egy koreai próbálkozott az anód 4es raktárba. Hagytam érvényesülni. Végül megoldottam July 9, 2025 at 3:45 PM, Böröcz Tamás : "support" July 9, 2025 at 4:32 PM, Viktoriia Hleba : 3 slitter anode 1 r/w robot stop July 9, 2025 at 4:32 PM, Rácz Dániel / FA : Megyünk July 9, 2025 at 4:50 PM, Viktoriia Hleba : AGV Problem RW Press 3 Anod July 9, 2025 at 5:19 PM, Szarka Adrián : Anod oldalon QC előtt ki állt egy agv hibára gyertek legyszi July 9, 2025 at 5:19 PM, Szarka Adrián : Köszi July 9, 2025 at 6:14 PM, 임동현 : Please check the error in the anode roll warehouse #4 July 9, 2025 at 6:16 PM, 임동현 : Please check the error in the Cathode roll warehouse #5 July 9, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Sarvajcz Ferenc Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— July 9, 2025 at 6:32 PM, 지찬우 : Anode slitt 5 Rw 2nd pusher error check please July 9, 2025 at 6:35 PM, adambenczik : Solved July 9, 2025 at 6:35 PM, adambenczik : Solved July 9, 2025 at 7:25 PM, Mohammad Amir : Good evening everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:05 Cathode:06 Slitter 3:- Anode:03 Cathode:00 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:02 Cathode:53 Press 3/4:- Anode:54 Cathode:03 Thank you very much! July 9, 2025 at 7:28 PM, Mohammad Amir : Dear @All, For your information:- We are receiving Materials request from Slitter Cathode -3 , however currently we don't have any transferable roll that's why you are witnessing delay and AGV doesn't bring Roll to Cathode Slitter -3,As soon as materials will be available it will go there. We ask for your patience and are sorry for the inconvenience. Thank you very much! July 9, 2025 at 8:09 PM, Mohammad Amir : @FA Please check STKA34_P01/STK35_P01_BP01 there is Port PLC disconnected error. July 9, 2025 at 8:09 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 8:11 PM, Mohammad Amir : @FA Please check Jumbo Vehicle Anode side AGV#25 there is Charging Timeout error. Thank you very much! July 9, 2025 at 8:12 PM, adambenczik : We are working on it July 9, 2025 at 8:13 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 8:17 PM, Mohammad Amir : Good evening @adambenczik @FA @gutenkunstabelzoltan Could you please confirm if there is any actual Roll that exists on E0JGVA01_VC15? In ACS I don't see any Roll however on our database I see the Roll RBA1055. I need your confirmation after checking physically. Thank you very much! July 9, 2025 at 8:19 PM, adambenczik : The AGV has no roll on it July 9, 2025 at 8:20 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much for confirming. July 9, 2025 at 9:09 PM, Oleksii Krasnoshchok : Anode press 3 long time waiting Agv u/w July 9, 2025 at 9:11 PM, Mohammad Amir : @adambenczik Please make STKA35_C01 active,it is inactive without error and that's why there is delay in Roll transfer to Anode press -3. Thank you very much! July 9, 2025 at 9:11 PM, Anastasiia~~ : Hello slitt anode 1 no AGV please check July 9, 2025 at 9:11 PM, Mohammad Amir : Checking July 9, 2025 at 9:12 PM, Mohammad Amir : @Anastasiia~~ Due to this issue you are witnessing delay in Anode Slitter -1 Roll transfer. I already informed the FA. Thank you very much! July 9, 2025 at 9:13 PM, Mohammad Amir : Now ,issue has been resolved ✅. And AGV#15 in the way to Anode Slitter -1. Thank you very much! July 9, 2025 at 9:14 PM, Mohammad Amir : Issue has been resolved ✅. AGV#1 in the way to Anode press-3. Thank you very much! July 9, 2025 at 9:28 PM, Powder tréner : S.O.S .Sziasztok szeretnék kérni segítséget,poron Katód raktár conveyoron az AGV rosszul vette fel a palettát és félretolta. July 9, 2025 at 9:34 PM, adambenczik : Megyünk July 9, 2025 at 9:43 PM, 지찬우 : Cathode slitt 1 conveyor is stopped Check please July 9, 2025 at 9:55 PM, adambenczik : Kész July 9, 2025 at 9:57 PM, Oleksii Krasnoshchok : Same problem July 9, 2025 at 9:59 PM, Mohammad Amir : @adambenczik Please check STKA34_P01 there is Key S/w off error and it is delaying the tasks for Andoe press-3. Thank you very much! July 9, 2025 at 10:01 PM, gutenkunstabelzoltan : 2 guys working on it to solve the problem but its takes time July 9, 2025 at 10:01 PM, Mr.Miti (미티) FA : Working on it July 9, 2025 at 10:03 PM, Margaret : Hello. 3 slitt anode nincs Agv - 30 perc . Please check July 9, 2025 at 10:04 PM, Mohammad Amir : @Margaret Due to this issue you are witnessing delay. I already informed the FA and they are working on it. Thank you very much! July 9, 2025 at 10:04 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 10:08 PM, Mohammad Amir : @adambenczik @FA Please check CNVC51_08_003 there is Data mismatch error and it is blocking materials recovery. Thank you very much! July 9, 2025 at 10:10 PM, Mohammad Amir : Hello, According to FA that it will take time to fix STKA34 issue ,so if you need roll on urgent basis to continue production, please let me know. Thank you very much! July 9, 2025 at 10:11 PM, Margaret : Hello. Come pls anode slitt 5 transfer problem July 9, 2025 at 10:25 PM, 지찬우 : Anode slitt 3 UW LR check please July 9, 2025 at 10:26 PM, Szeitz Flórián : Rtd szerint mèg 5db Roll -nak kénne lenni . July 9, 2025 at 10:26 PM, Mohammad Amir : Sir, There is an active job but due to issue in STKA34 ,you are witnessing delay. FA team working on it. If you need urgently Roll, please inform me. Thank you very much! July 9, 2025 at 10:27 PM, Mohammad Amir : @Szeitz Flórián Due to issue,you are witnessing delay. Thank you very much! July 9, 2025 at 10:32 PM, Mohammad Amir : @FA @adambenczik Please check E0CNVC51_08_052/53 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 9, 2025 at 10:36 PM, gutenkunstabelzoltan : Kesz July 9, 2025 at 10:43 PM, 지찬우 : Anode slitt Please check for conveyor runtime over error July 9, 2025 at 10:44 PM, Oleksii Krasnoshchok : I also waiting anode press 3 July 9, 2025 at 10:45 PM, Mohammad Amir : Hello, According to FA that it will take time to fix STKA34 issue ,so if you need roll on urgent basis to continue production, please let me know. Thank you very much! July 9, 2025 at 10:50 PM, Mohammad Amir : Dear @All, For your information:- Due to issue in E0STKA34 ,there will be delay in Roll transfer to Anode Slitter -3 &Press 3 & Press 1. I informed the FA team ,they are working on the issue. If you will production delay due to shortages of Roll,feel free to contact me immediately. Thank you very much! July 9, 2025 at 10:50 PM, 지찬우 : Can you send me materials from a warehouse other than the ones in warehouse 4? July 9, 2025 at 10:51 PM, Mohammad Amir : Yes Sir, Sure I can do that,checking. You would like to receive for All process machines affected? Thank you very much! July 9, 2025 at 10:53 PM, 지찬우 : Please keep sending it everywhere, thank you very much July 9, 2025 at 10:53 PM, Mohammad Amir : Sure Sir. Please when I will inform you , please press LR for Anode Slitter -3 ,Press -1&3. Thank you very much! July 9, 2025 at 10:55 PM, 지찬우 : I sent a resend signal July 9, 2025 at 10:55 PM, Mohammad Amir : @Oleksii Krasnoshchok Please press LR for Anode press -3. Sir @지찬우 please press LR for Press -1 Anode. @Margaret Please press LR for Anode Slitter-1. Thank you very much! July 9, 2025 at 10:58 PM, Mohammad Amir : Sir, Please press again we didn't receive any LR. Thank you very much! July 9, 2025 at 10:58 PM, 지찬우 : Press 1,3 slitt3 I did LR July 9, 2025 at 10:58 PM, Mohammad Amir : Slitter -3** July 9, 2025 at 11:00 PM, Mohammad Amir : Sir, Unfortunately we did not receive LR for all three Process machines. Please try again. Thank you very much! July 9, 2025 at 11:03 PM, 지찬우 : I sent the signal now July 9, 2025 at 11:05 PM, Mohammad Amir : Sir, Unfortunately we still didn't receive any signal for Anode press 1&3 and Anode Slitter -3. Thank you very much! July 9, 2025 at 11:06 PM, Mohammad Amir : @Mr.Miti (미티) FA Could you please check we are not receiving LR from Anode Slitter -3 and Anode Press 3&1. Thank you very much! July 9, 2025 at 11:10 PM, 김건희 : @임동현 음극롤창고 4호기 FA조치중에 홈스탠드 오작동으로 무지부 데미지 약 400~500m 정도 발생했습니다 상기건 전달 받은 사항 있으실까요? July 9, 2025 at 11:14 PM, Mohammad Amir : Sir, Update:- Now LR received successfully for Anode press -1 and Press 3 and slitter -3 at 23:10. For Press -1 ,AGV#8 on the way with Roll from STKA33. ✅ For Press -3,Roll on the way from STKA35. ✅ And for Slitter -3,Roll also on the way from STKA35. ✅ Thank you very much! July 9, 2025 at 11:15 PM, Mohammad Amir : @Oleksii Krasnoshchok @Margaret For your information as well. Thank you very much! July 9, 2025 at 11:17 PM, 임동현 : 전달 받은 사항 없습니다. July 9, 2025 at 11:24 PM, 김건희 : @Kim Dongju(김동주)_FA @연해리 야간에 죄송합니다 음극롤창고 4호기 FA조치중에 홈스탠드 오작동으로 무지부 데미지 약 400~500m 정도 발생했다고 합니다 혹시 공유 받으신 내용 있으실까요? Lot ID는 EA1P073F727241 입니다 July 9, 2025 at 11:33 PM, Mr.Miti (미티) FA : STKA34 in service again July 9, 2025 at 11:33 PM, Mohammad Amir : Thank you very much! July 10, 2025 at 12:02 AM July 10, 2025 at 12:02 AM, Vlad Danilevskyi : This message was deleted. July 10, 2025 at 12:03 AM, Vlad Danilevskyi : Hello. Cathode press 2 agv uw error. Thanks July 10, 2025 at 12:06 AM, adambenczik : Solved July 10, 2025 at 12:08 AM, Oleksii Krasnoshchok : Anode press 3 long time waiting Agv u/w July 10, 2025 at 12:09 AM, Mohammad Amir : AGV#18 on the way with Roll now ✅. Thank you very much! July 10, 2025 at 12:31 AM, Anastasiia~~ : no tray for anode 2, please check it July 10, 2025 at 12:32 AM, Mohammad Amir : Now, Anode empty Trays on the way ✅ Thank you very much! July 10, 2025 at 12:36 AM, Mohammad Amir : @FA @adambenczik Please check STKA51_C01/C02 ,these cranes are inactive without error.So,Please make it active on priority it will increase the speed of empty trays delivery to Andoe side. Thank you very much! July 10, 2025 at 12:49 AM, Mohammad Amir : @gutenkunstabelzoltan Please check CNVC51_08_031 there is INV-3 error and it is blocking CA empty trays delivery. Check the issue on priority as there is shortages of empty trays on CA Slitter -2. Thank you very much! July 10, 2025 at 12:51 AM, Anastasiia~~ : still no trays for slitt anode 2 July 10, 2025 at 12:52 AM, Mohammad Amir : Trays are going continuously however whole CNV is empty that's why it is taking time . I am increasing priorities. Thank you very much! July 10, 2025 at 12:54 AM, Anastasiia~~ : Thanks July 10, 2025 at 1:04 AM, Mohammad Amir : Update :- There is a issue with CNVA52_RTV01 and now because of this empty trays delivery has slowed down ,I informed the FA team members in assembly chat group. Meanwhile empty trays on the way from STKA52. ✅ Thank you very much! July 10, 2025 at 1:13 AM, Mohammad Amir : Now , Empty trays have started to come to Andoe slitter-2 ✅ . Thank you very much! July 10, 2025 at 1:14 AM, Anastasiia~~ : anode 1 also no trays July 10, 2025 at 1:15 AM, Sárvári Márk : A fólia raktárunk nem akar működni, tudtok segíteni benne? Ki kéne vennünk fóliát. Köszi.✌️ July 10, 2025 at 1:16 AM, Mohammad Amir : Yes , Empty trays will reach Anode 1 as well. Currently the whole CNV is empty ,I am managing to fill the CNV. Just now,two empty trays reached Anode Slitter -1 as well. Thank you very much! July 10, 2025 at 1:16 AM, Anastasiia~~ : Thanks July 10, 2025 at 1:16 AM, Oleksii Krasnoshchok : Anode press 1 long time waiting Agv u/w July 10, 2025 at 1:16 AM, Mohammad Amir : You are welcome! July 10, 2025 at 1:16 AM, Mohammad Amir : Checking. July 10, 2025 at 1:18 AM, Mohammad Amir : Issue has resolved ✅ AGV#19 on the way . Thank you very much! July 10, 2025 at 1:24 AM, gutenkunstabelzoltan : Kesz July 10, 2025 at 1:54 AM, 임동현 : Cathode AGV 9 stopped July 10, 2025 at 2:18 AM, Anastasiia~~ : Slitt Anod 5 no AGV 38 minutes July 10, 2025 at 2:19 AM, Mohammad Amir : Now, AGV#17 on the way ✅ Thank you very much! July 10, 2025 at 2:51 AM, Anastasiia~~ : Slitt Anod 5 no AGV again July 10, 2025 at 2:56 AM, Mohammad Amir : For Slitter Anode 5, Unfortunately we don't have enough Materials in the warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 10, 2025 at 3:01 AM, Anastasiia~~ : Anod slitt 2 no trays please check July 10, 2025 at 3:01 AM, Anastasiia~~ : 1-2 July 10, 2025 at 3:01 AM, Mohammad Amir : Checking July 10, 2025 at 3:05 AM, Mohammad Amir : Hello, Trays are on the way ✅ Thank you! July 10, 2025 at 3:07 AM, Anastasiia~~ : Thanks July 10, 2025 at 3:25 AM, Mohammad Amir : @gutenkunstabelzoltan Please check CNVC51_08_022/23 there is INV-01 Run time Over error and it is blocking CA empty trays delivery to Slitter -1. Thank you very much! July 10, 2025 at 3:32 AM, Karina Lyzanets : Slitt Cathode 1 nem jönnek a tálcák, conveyor hiba July 10, 2025 at 3:32 AM, Karina Lyzanets : Köszo July 10, 2025 at 3:32 AM, Karina Lyzanets : Köszi July 10, 2025 at 3:32 AM, gutenkunstabelzoltan : Mar uton vannak elivleg! July 10, 2025 at 3:32 AM, Mohammad Amir : @Karina Lyzanets Because of this issue you witnessed delay. I already informed @gutenkunstabelzoltan Thank you! July 10, 2025 at 3:33 AM, gutenkunstabelzoltan : Its already done! July 10, 2025 at 3:34 AM, Karina Lyzanets : Thank you very much. Sorry to bother you July 10, 2025 at 3:34 AM, Karina Lyzanets : Bocsánot😅 July 10, 2025 at 3:35 AM, Mohammad Amir : You are most welcome! July 10, 2025 at 3:36 AM, 지찬우 : Anode press 3 UW Please check the transfer error July 10, 2025 at 3:55 AM, Mohammad Amir : @FA @gutenkunstabelzoltan Please check STKC33_C01 there is travel exact position error. Thank you! July 10, 2025 at 3:56 AM, Anastasiia~~ : Slitt Anod 2 no AGV July 10, 2025 at 3:56 AM, Mohammad Amir : Now, AGV#11 on the way with Roll. ✅ Thank you very much! July 10, 2025 at 4:08 AM, gutenkunstabelzoltan : Everything is good but anode cv is quite full July 10, 2025 at 4:15 AM, Mr.Miti (미티) FA : I redirected the trays to 51. July 10, 2025 at 4:22 AM, Margaret : anod the conveyor stopped July 10, 2025 at 4:28 AM, gutenkunstabelzoltan : One guy worink in the cv with a laptop thats why it stopped! July 10, 2025 at 4:54 AM, Anastasiia~~ : Slitt Anod 2 no AGV July 10, 2025 at 4:55 AM, Mohammad Amir : Now , AGV#1 on the way with Roll ✅ Thank you very much! July 10, 2025 at 5:38 AM, Mohammad Amir : @Anastasiia~~ Update:- Now there is enough Anode empty trays available on the CNV ✅. Thank you very much! July 10, 2025 at 5:39 AM, Anastasiia~~ : Thanks July 10, 2025 at 5:39 AM, Mohammad Amir : You are welcome! July 10, 2025 at 6:09 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.10. 9+0/12+1 Tech, 0Sl, 1Sup. Overtime(1): Harasztia Zoltán Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(0): Shift Change(0): --------------- Electrode(4): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, TakácsÁdám, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Pintye Miklós --------------- Form/Modul( July 10, 2025 at 6:17 AM, Böröcz Tamás : Katód slit 4 nincs AGV July 10, 2025 at 6:17 AM, Böröcz Tamás : Agv 1 megállt July 10, 2025 at 6:18 AM, Böröcz Tamás : Egy raklap bobin útba volt neki July 10, 2025 at 6:34 AM, Böröcz Tamás : Solved July 10, 2025 at 6:36 AM, Böröcz Tamás : Ha bármilyen anyagmozgatási munka van még szóljatok azért vagyok itt 🥲 July 10, 2025 at 6:39 AM, Viktoriia Hleba : anode convejor stop. ( lift ) please chrck July 10, 2025 at 6:39 AM, Viktoriia Hleba : check July 10, 2025 at 6:39 AM, duzzaman Md (MCS) : @FA Could you please check the cranes of E0STKA52. Those are not moving. Thank you ! July 10, 2025 at 6:40 AM, Csanálosi Gábor FA : On it July 10, 2025 at 6:50 AM, Nagy Dávid 4 : Anod slitt Conveyor stop help köszönöm szépen July 10, 2025 at 6:51 AM, Nagy Dávid 4 : Anod slit 2 nincs AGV 15p help help köszönöm szépen July 10, 2025 at 6:51 AM, Viktoriia Hleba : 5 slitter nincs tálca . Please check July 10, 2025 at 6:53 AM, duzzaman Md (MCS) : Good morning. No available materials. Thank you July 10, 2025 at 6:54 AM, Csanálosi Gábor FA : Done July 10, 2025 at 6:56 AM, duzzaman Md (MCS) : Thank you. Materials are moving now. @Viktoriia Hleba you'll receive it soon July 10, 2025 at 6:59 AM, Viktoriia Hleba : 5 slitter anode nincs Agv. Please check July 10, 2025 at 7:00 AM, Nagy Dávid 4 : anod slitt 1 nincs AGV 17p help help help köszönöm szépen July 10, 2025 at 7:06 AM, duzzaman Md (MCS) : There's active job. You'll receive it soon. July 10, 2025 at 7:07 AM, duzzaman Md (MCS) : No material available. July 10, 2025 at 7:08 AM, Viktoriia Hleba : anode convejor stop. ( lift ) please check July 10, 2025 at 7:11 AM, Csanálosi Gábor FA : Megy, csak lassan. :( July 10, 2025 at 8:04 AM, Viktoriia Hleba : 5 slitter anode nincs Agv - 30 perc . Please check July 10, 2025 at 8:05 AM, duzzaman Md (MCS) : No search lot. Thank you July 10, 2025 at 8:24 AM, Anton Mashchenko : Cathode press 2, AGV 14 needs to moved! Thanks! July 10, 2025 at 8:30 AM, Rácz Dániel / FA : Solved 🫡 July 10, 2025 at 8:50 AM, Viktoriia Hleba : Anod slit 2 nincs AGV 15p July 10, 2025 at 8:52 AM, duzzaman Md (MCS) : There's active job. VC 19 is acquiring it now. July 10, 2025 at 9:04 AM, Viktor Vadas : Sziasztok! Folia raktarnal szeretnek segitseget kerni! Koszonom! July 10, 2025 at 9:09 AM, Viktoriia Hleba : anode convejor stop July 10, 2025 at 9:10 AM, Viktoriia Hleba : Please check July 10, 2025 at 9:14 AM, Nagy Dávid 4 : Anod press 3 agv nem viszi el a jumbot rá tudnátok nézni köszönöm szépen July 10, 2025 at 9:20 AM, Viktor Vadas : Sziasztok! Folia raktarnal szeretnek segitseget kerni ismetelten! Koszonom! July 10, 2025 at 9:23 AM, Böröcz Tamás : @duzzaman Md (MCS) please check empty tray supply July 10, 2025 at 9:24 AM, Böröcz Tamás : CNVA51 July 10, 2025 at 9:24 AM, duzzaman Md (MCS) : On it . Currently increasing the priorities July 10, 2025 at 9:27 AM, duzzaman Md (MCS) : Material flow started . July 10, 2025 at 9:49 AM, Viktoriia Hleba : 2-3 slitter anode nincs tálxa. Please check July 10, 2025 at 9:51 AM, 방혁 PM(Bang.Hyuk) FA : @박태영 피엠님 OP분들이 슬리터 CV에 풀트레이가 쌓인 상태로 공매거진 출고 명령만 계속 생성하면 공급 더 늦어집니다... 릴창고 과부화 상태입니다 July 10, 2025 at 9:52 AM, duzzaman Md (MCS) : You'll receive soon. MCS order is okay. Increasing the priorities. July 10, 2025 at 9:53 AM, Sazzad Bhai SKon : Checking July 10, 2025 at 9:55 AM, Sazzad Bhai SKon : Empty tray moving to P07. We'll keep checking July 10, 2025 at 9:56 AM, 방혁 PM(Bang.Hyuk) FA : Please create empty tray supply command in warehouse 51A 52 A is overloaded July 10, 2025 at 9:58 AM, Sazzad Bhai SKon : Available lots are only from STK A52 July 10, 2025 at 10:00 AM, Sazzad Bhai SKon : Okay transferring manually July 10, 2025 at 10:01 AM, 제범 : please check coating ca1 agv July 10, 2025 at 10:04 AM, 방혁 PM(Bang.Hyuk) FA : @박태영 피엠님 일단 급한대로 SCS로 명령 줘서 51A창고에서 공트레이에 관해서 메뉴얼 반송 걸었습니다. 참조 부탁드립니다 July 10, 2025 at 10:09 AM, duzzaman Md (MCS) : @FA Please check E0CNVA51_P03 there is PIO complete on time over error. Thank you! July 10, 2025 at 10:14 AM, duzzaman Md (MCS) : Still exists. Please check. July 10, 2025 at 10:20 AM, Csanálosi Gábor FA : On it July 10, 2025 at 10:28 AM, Csanálosi Gábor FA : Done July 10, 2025 at 11:04 AM, 제범 : This message was deleted. July 10, 2025 at 11:05 AM, Böröcz Tamás : Is it started? July 10, 2025 at 11:05 AM, 박정근(Park) : yes July 10, 2025 at 11:06 AM, Böröcz Tamás : Sorry but the System was weak ín the last 10 minutes July 10, 2025 at 11:06 AM, Böröcz Tamás : But now seems to be good July 10, 2025 at 11:07 AM, Böröcz Tamás : Also slitt2 AGV otw July 10, 2025 at 11:12 AM, duzzaman Md (MCS) : @FA Kindly check AGV CALIBRATION STEP TIME EXCEEDED at E0STKC033_P01 thank you July 10, 2025 at 11:16 AM, Viktoriia Hleba : anode slitter convejor stop. please check July 10, 2025 at 11:17 AM, Böröcz Tamás : @duzzaman Md (MCS) the a34 warehouse is under Korean maintenance, so all work should be redirected elsewhere July 10, 2025 at 11:18 AM, Böröcz Tamás : @duzzaman Md (MCS) July 10, 2025 at 11:19 AM, duzzaman Md (MCS) : There were only one command. Cancelled it. July 10, 2025 at 11:19 AM, Böröcz Tamás : Thanks July 10, 2025 at 11:20 AM, duzzaman Md (MCS) : From, MCS side we see materials are moving. It's on. Thank you July 10, 2025 at 11:21 AM, Böröcz Tamás : will stand for an unforeseeable time. like 5mins~forever July 10, 2025 at 11:21 AM, Sazzad Bhai SKon : Empty tray supply in anode is normal now. July 10, 2025 at 11:21 AM, Böröcz Tamás : It is good July 10, 2025 at 11:22 AM, Böröcz Tamás : But as you can see conveyor is full of full trays July 10, 2025 at 11:23 AM, Sazzad Bhai SKon : Yes, I'm returning them with priority July 10, 2025 at 11:39 AM, Aloshyn Yevhen : Anode press 2 no AGV 12 min July 10, 2025 at 11:43 AM, duzzaman Md (MCS) : Currently AGV is acquiring. It will be at destination soon. July 10, 2025 at 11:47 AM, 김지수PM(Gyuri)_FA : @전극 E0STKC34_M01에 있는 RBC0952가 7/9 16:38:54부터 계속 위치해있습니다. 해당 M포트에 또 다른 출고명령(RBC0747)이 19시간째 대기중인데, 30분 뒤 그대로면 잡 삭제하도록 하겠습니다. 감사합니다. July 10, 2025 at 12:13 PM, Rácz Dániel / FA : Anód conveyor pálya leürítve, sajnos mind a két raktár nagyon tele van. Így sajnos újra elő fog fordulni, hogy telik. July 10, 2025 at 12:16 PM, Aloshyn Yevhen : Anode press 1 U/W problem with robot July 10, 2025 at 12:23 PM, Rácz Dániel / FA : Solved July 10, 2025 at 12:47 PM, Anton Mashchenko : Anode press 2, AGV not coming 40 min! Help! July 10, 2025 at 12:48 PM, Czeilinger Krisztián : @duzzaman Md (MCS) check please. July 10, 2025 at 12:50 PM, Czeilinger Krisztián : @Sazzad Bhai SKon please check. July 10, 2025 at 12:51 PM, duzzaman Md (MCS) : Checking July 10, 2025 at 12:54 PM, Sazzad Bhai SKon : There was no LR. But a manual job created now. July 10, 2025 at 12:55 PM, Sazzad Bhai SKon : Please first raise LR from machine. If you don't receive the material, let MCS know July 10, 2025 at 12:55 PM, Aloshyn Yevhen : Anode press 3 U/W problem with robot July 10, 2025 at 12:58 PM, Anton Mashchenko : @Aloshyn Yevhen July 10, 2025 at 12:59 PM, Sazzad Bhai SKon : All clear now. Both empty and full materials flow is normal July 10, 2025 at 1:06 PM, Rácz Dániel / FA : Szívesen, csak 40-60 percet álltam az anód conveyor mellett és néztem éppen melyik raktárba tudom beküldeni a teli reeleket. Köszönöm 😉 July 10, 2025 at 1:06 PM, Böröcz Tamás : Thank you @Rácz Dániel / FA July 10, 2025 at 1:09 PM, Böröcz Tamás : Still ongoing July 10, 2025 at 1:17 PM, Aloshyn Yevhen : We still waiting for material July 10, 2025 at 1:21 PM, Böröcz Tamás : That's why I asked MCS hours before July 10, 2025 at 1:21 PM, Böröcz Tamás : And now July 10, 2025 at 1:24 PM, duzzaman Md (MCS) : Thers active job from the STKA31. SL AN 3 GOT JOB ON PRIORITY. IT WAS CREATED WITH HIGH PRIORITY. Press 3 got behind it. All good from mcs. It would be delivered once the prioritised job gets completed. July 10, 2025 at 1:57 PM, Viktoriia Hleba : Anod slit 1 nincs AGV 15 perc July 10, 2025 at 2:04 PM, duzzaman Md (MCS) : There's active job. VC 19 departed. Thank you July 10, 2025 at 2:06 PM, Viktoriia Hleba : Anod slit 2 nincs AGV 16 perc July 10, 2025 at 2:07 PM, duzzaman Md (MCS) : No search lot July 10, 2025 at 2:37 PM, Dana Honak : Cathode slitt . Convejor stop. July 10, 2025 at 2:47 PM, duzzaman Md (MCS) : @FA Please check E0STK002_C01, Travel Driver Error. Thank you July 10, 2025 at 2:51 PM, Czeilinger Krisztián : Elindult a conveyor cathodon July 10, 2025 at 2:55 PM, Czeilinger Krisztián : The crane is not malfunctioning. On standby. July 10, 2025 at 3:00 PM, Viktor Vadas : Sziasztok! Segitseget szeretnek kerni katod 1 1-es rewinderre! Koszonom! July 10, 2025 at 3:01 PM, Czeilinger Krisztián : Megyek is. July 10, 2025 at 3:35 PM, Szappanos Gábor : Hali, coating anód 1 hez szeretnék segítséget kérni. Köszi July 10, 2025 at 3:37 PM, Nagy Dávid 4 : Anod press 3-ra em jön anyag help help köszönöm szépen July 10, 2025 at 3:45 PM, Viktoriia Hleba : anode slitt 3 nincs Agv - 20 perc July 10, 2025 at 3:45 PM, Viktoriia Hleba : Please check July 10, 2025 at 3:46 PM, Viktoriia Hleba : anod slitt 2 nincs AGV 28p July 10, 2025 at 3:50 PM, duzzaman Md (MCS) : Job is queued for this one. Working on it July 10, 2025 at 3:51 PM, duzzaman Md (MCS) : Vehicle 25 is assigned . It will be delivered. July 10, 2025 at 3:57 PM, duzzaman Md (MCS) : @FA Could you please confirm if RBA0722 is at E0STK034_P01_BP01 or not ? Thank you July 10, 2025 at 4:02 PM, KANG HEEDOO[강희두]/CS : We have two roll rolls for warehousing and shipping. AGV going in now. Please change your destination. July 10, 2025 at 4:03 PM, KANG HEEDOO[강희두]/CS : Request to change the destination of AGV#2. July 10, 2025 at 4:05 PM, KANG HEEDOO[강희두]/CS : @duzzaman Md (MCS) July 10, 2025 at 4:07 PM, duzzaman Md (MCS) : Modifying or changing the destination doesn't work using MCS. What we can do is to cancel and send it back to STK July 10, 2025 at 4:10 PM, Anton Mashchenko : Cathode press 1, AGV not coming 15 min! Help! July 10, 2025 at 4:10 PM, duzzaman Md (MCS) : @FA Kindly check E0STKA34_P01_BP01 Its OOS. Also, Please confirm the carrier there. Thank you! July 10, 2025 at 4:13 PM, duzzaman Md (MCS) : There's active job. All good from MCS. However, it's queued, increased the priority. Thank you July 10, 2025 at 4:16 PM, duzzaman Md (MCS) : @FA Please check the crane C01 of E0STKC31 There are jobs in this STK but it's not moving. Thank you July 10, 2025 at 4:20 PM, Rácz Dániel / FA : Yes, RBA0722. July 10, 2025 at 4:21 PM, Rácz Dániel / FA : E0STKC31_P01 RBC0771 July 10, 2025 at 4:24 PM, Rácz Dániel / FA : No order the ACS July 10, 2025 at 4:25 PM, duzzaman Md (MCS) : Thanks for confirming. Please transfer it manually from ACS. It's blocking a few other jobs. July 10, 2025 at 4:26 PM, Rácz Dániel / FA : Thank you Mr 🫡 July 10, 2025 at 4:27 PM, Rácz Dániel / FA : @Csicskovics Balázs gyere légyszíves a CA31 hez, köszi July 10, 2025 at 4:32 PM, Rácz Dániel / FA : I sent it to cathode press #3 July 10, 2025 at 4:33 PM, duzzaman Md (MCS) : appreciate it a lot. Thank you July 10, 2025 at 4:34 PM, Nagy Dávid 4 : Anod press 3-ra em jön anyag help help köszönöm szépen July 10, 2025 at 4:34 PM, Rácz Dániel / FA : Thank you for the help ! 🫡 July 10, 2025 at 4:35 PM, Nagy Dávid 4 : Nem jön meg mindig az anyag tudjátok mért help help köszönöm szépen July 10, 2025 at 4:37 PM, Rácz Dániel / FA : @duzzaman Md (MCS) please check July 10, 2025 at 4:39 PM, Rácz Dániel / FA : @Nagy Dávid 4 gyere kérlek az AN34 hez köszönöm July 10, 2025 at 4:40 PM, Nagy Dávid 4 : Megyek July 10, 2025 at 4:41 PM, Sazzad Bhai SKon : There is a job. But STK A34 out bound port is occupied by other carrier July 10, 2025 at 4:42 PM, Viktoriia Hleba : What's the problem Agv slitter anode 3 ? He is not here. July 10, 2025 at 4:43 PM, Sazzad Bhai SKon : @Viktoriia Hleba transfer is blocking for thís July 10, 2025 at 4:44 PM, Viktoriia Hleba : Thank you for the information. July 10, 2025 at 4:45 PM, Sazzad Bhai SKon : @FA @ACS Please transfer the material manually from this port. E0STKA34_P01_BP01, this is blocking press delivery July 10, 2025 at 4:46 PM, Rácz Dániel / FA : I am here amd manual order try solved the problem July 10, 2025 at 4:49 PM, Csicskovics Balázs : @Rácz Dániel / FA gyere kérlek Cathode press 3- hoz. Köszönöm July 10, 2025 at 4:52 PM, Rácz Dániel / FA : Kis türelem July 10, 2025 at 4:57 PM, 이종오 left this chatroom. July 10, 2025 at 5:02 PM, Rácz Dániel / FA : @duzzaman Md (MCS) everything is in place now July 10, 2025 at 5:03 PM, duzzaman Md (MCS) : Job has been created. Thank you once again for tremendous help. July 10, 2025 at 5:04 PM, Rácz Dániel / FA : Thank you Sir 🫡 July 10, 2025 at 5:35 PM, Rácz Dániel / FA : Sloweed 😎 July 10, 2025 at 6:47 PM, Anastasiia~~ : Hello no AGV for 1-2 slitt Anod July 10, 2025 at 6:50 PM, VK (mcs) : There is no available material July 10, 2025 at 8:00 PM, gutenkunstabelzoltan : There is no material since than? July 10, 2025 at 8:01 PM, VK (mcs) : For both job assigned , materials are waiting for AGV in STK A35 and A31 ports. July 10, 2025 at 8:02 PM, gutenkunstabelzoltan : There are free agv why isnt an order to them? July 10, 2025 at 8:03 PM, gutenkunstabelzoltan : Now i see July 10, 2025 at 8:40 PM, Oleksii Krasnoshchok : Please come cathode press 7 transfer in u/w stoped July 10, 2025 at 9:47 PM, 임동현 : Cathode sliter 2nd floor conveyor problem caused tray to stop July 10, 2025 at 10:09 PM, adambenczik : @VK (mcs) on Powder Cathode side, there was cleaning in manufacturing, so the F.A. had to take out material manually. Now, we are ready to return to automatic mode, but we have 3 materials on the conveyor with manual orders. AGVs are not taking the material automaticly. Can you change the order, so the system delivers materials automaticly? July 10, 2025 at 10:14 PM, VK (mcs) : Current jobs released by request of operations. I will change the destination, but for this . conveyor port (in/out put type ) should be changed to ( input) at least one of them, like P08 July 10, 2025 at 10:23 PM, adambenczik : I'm not sure if those ports can be switched to Input mode July 10, 2025 at 10:25 PM, VK (mcs) : In this case, I cannot change the destination, if it’s possible please remove remaining carriers on conveyor by AGV. I will cancel others. July 10, 2025 at 10:32 PM, adambenczik : We send in PS111-2504160214 and PS111-2504160220 with manual order. After that, manufacturing should be ready to work automaticly July 10, 2025 at 10:32 PM, Karina Lyzanets : Cathode oldalon a conveyor megállt! Gyertek légyszíves July 10, 2025 at 10:32 PM, Karina Lyzanets : Köszi July 10, 2025 at 10:33 PM, adambenczik : This message was deleted. July 10, 2025 at 10:33 PM, adambenczik : And PS111-2504160076 July 10, 2025 at 10:34 PM, VK (mcs) : Thank you, July 10, 2025 at 10:35 PM, VK (mcs) : @FA Can you check Cathode reel conveyor C52 July 10, 2025 at 10:39 PM, Anastasiia~~ : slitt anode 1 no agv 40 minutes July 10, 2025 at 10:40 PM, gutenkunstabelzoltan : Working on it July 10, 2025 at 10:41 PM, Anastasiia~~ : Thanks July 10, 2025 at 10:43 PM, gutenkunstabelzoltan : Solved July 10, 2025 at 11:26 PM, Karina Lyzanets : Cathode Slitt 2 nincsenek tálcák July 10, 2025 at 11:26 PM, Karina Lyzanets : Köszönöm szépen July 10, 2025 at 11:28 PM, Karina Lyzanets : Cathode oldalon nem jönnek a tálcák! Nézzetek meg légyszíves July 10, 2025 at 11:29 PM, Karina Lyzanets : (touched) July 10, 2025 at 11:33 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 (8041) Empty tray is not moving ahead. July 10, 2025 at 11:34 PM, VK (mcs) : C51* July 10, 2025 at 11:41 PM, Karina Lyzanets invited Alesya 알레시아. July 10, 2025 at 11:59 PM, gutenkunstabelzoltan : Kesz! Mennek a talcak! July 11, 2025 at 12:16 AM July 11, 2025 at 12:16 AM, 임동현 : Please check the error in the anode roll warehouse #4 July 11, 2025 at 12:24 AM, Oleksii Krasnoshchok : Cathode press 7 long time waiting Agv u/w July 11, 2025 at 12:25 AM, cehmannzsoltcehmann : This message was deleted. July 11, 2025 at 12:26 AM, cehmannzsoltcehmann : Solved July 11, 2025 at 12:28 AM, 지찬우 : How much material can be sent to anode slits 1 and 2? July 11, 2025 at 12:29 AM, VK (mcs) : There is only 1 roll available July 11, 2025 at 1:04 AM, 지찬우 : Can't send materials RBA2044, RBA0819, RBA0818 from Anode Warehouse #1 to Slitt? July 11, 2025 at 1:10 AM, VK (mcs) : Mentioned carriers location in MCS is N/A. If you know where is the location, then please rack-out/in it. July 11, 2025 at 1:18 AM, Oleksii Krasnoshchok : Please come cathode press 7 transfer in u/w stoped July 11, 2025 at 2:09 AM, 임동현 : anode AGV 17 stopped July 11, 2025 at 2:55 AM, Anastasiia~~ : slitt anode 1 no agv July 11, 2025 at 2:55 AM, Anastasiia~~ : 2 July 11, 2025 at 2:57 AM, VK (mcs) : No material available July 11, 2025 at 3:30 AM, 임동현 : Cathode sliter 2nd floor conveyor problem caused tray to stop July 11, 2025 at 3:32 AM, gutenkunstabelzoltan : Kesz July 11, 2025 at 5:12 AM, Karina Lyzanets : Slitt Cathode 2 mögött a conveyor megállt July 11, 2025 at 5:12 AM, Karina Lyzanets : Help help July 11, 2025 at 5:12 AM, Karina Lyzanets : Köszönöm July 11, 2025 at 5:15 AM, adambenczik : Itt vagyunk July 11, 2025 at 5:39 AM, Szabó Zoltán János : Sziasztok, Szeretnek segitseget kerni. Anod 1 coating 2.rw robot be ment a jumbo levetelhez a daru megallt. Zolden all a gep, nem helez hibat. Termel a sor igy szukseges lenne a muszak vegi helyreallitas. July 11, 2025 at 5:39 AM, Szabó Zoltán János : Koszonom July 11, 2025 at 8:02 AM, Oláh Rajmund : Gyertek legyszives anode slitt 2 transfer problema July 11, 2025 at 8:03 AM, Viczai Tamás : Megyünk July 11, 2025 at 9:00 AM, Oláh Rajmund : Anode slitt 1-es gépen 35 perce nincs anyag rá néznétek kérlek? July 11, 2025 at 9:04 AM, Farkas Tamàs : RTD szerint nincs rá anyag July 11, 2025 at 9:05 AM, Oláh Rajmund : Rendben koszonom July 11, 2025 at 9:11 AM, Shakir (MCS) : For Slitt1 AN : AGV18 on the way For Slitt2 AN : AGV19 on the way For slitt5 AN : RBA0962 assigned Thank you July 11, 2025 at 9:15 AM, Shakir (MCS) : Next Lot Available for Slitter Anode/Cathode 1-2-4-5 AN: 00 CA: 00 Thank you July 11, 2025 at 9:33 AM, Sazzad Bhai SKon : There's a long pending job for RBC4282 at port C2NCB02_P01. Reason: all Auto ports of 1F roll STK is out of service. July 11, 2025 at 10:36 AM, Shakir (MCS) : @FA Please check AGV25 AN error near STKA34, Auto select abnormal. Thank you July 11, 2025 at 10:37 AM, Simon Attila F. A. : Korean support try solving a problem. I stoped this AGV. July 11, 2025 at 10:37 AM, Shakir (MCS) : Noted, Thank you for the information July 11, 2025 at 1:49 PM, 김건희 : @KIM SEYEON [김세연]_FA 양극 프래스 3호기 AGV와 U/W측 이재기 암 충돌 한번 일어났습니다 현지 테크니션분들이 확인중에 있으신데 조치 이후에도 재발 발생 할 수 있으니 지속 모니터링 요청드려도 될까요? July 11, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 July 11, 2025 at 1:50 PM, Skwarek Tibor : E1PRC05-TR03 U/W transfer was hitting the agv and the bobbyn sensor cable damaged. July 11, 2025 at 2:09 PM, Bks.Gabor : Hali, anod press 1-hez gyertek, legyszives, köszönöm. July 11, 2025 at 2:09 PM, Viczai Tamás : Megyünk July 11, 2025 at 3:02 PM, Oláh Rajmund : Gyertek legyszives cathode press 7 U/W robot problema July 11, 2025 at 3:11 PM, Skwarek Tibor : Kész July 11, 2025 at 3:29 PM, Czél Tamás : Sziasztok Katód Press 7-re kérnék segítséget a felrakó kar nem működik megfelelően. Köszönöm July 11, 2025 at 3:30 PM, Viczai Tamás : Megyek July 11, 2025 at 3:36 PM, Czél Tamás : Meg tudnád nézni hogy Katód oldalon miért nem jönnek a reel tálcák pls? Köszönöm July 11, 2025 at 3:37 PM, Shakir (MCS) : @FA Please check Empty tray at E0CNVC51_006 not moving. Thank you July 11, 2025 at 3:38 PM, Shakir (MCS) : @Simon Attila F. A. Please check July 11, 2025 at 3:39 PM, Simon Attila F. A. : Checking... July 11, 2025 at 3:43 PM, na1tis : Hello! Press 1, Cathode,problem AGV,help me,please July 11, 2025 at 3:43 PM, Simon Attila F. A. : I check. July 11, 2025 at 3:44 PM, Simon Attila F. A. : My colleague is check. July 11, 2025 at 3:44 PM, Shakir (MCS) : I am releasing some empty reel tray from STKC51 to full fill production. Thank you July 11, 2025 at 3:47 PM, Czél Tamás : Sziasztok Katód Press 1-hez is kérnék segítséget. AGV probléma van. Köszönöm July 11, 2025 at 3:47 PM, Simon Attila F. A. : Itt vagyunk, Tomi. July 11, 2025 at 4:34 PM, Skwarek Tibor : Koreai támogatókkal keressük a hiba okát. Áll a felső szint az üres tálcákkal. July 11, 2025 at 4:46 PM, Czél Tamás : Sziasztok Katód Slitt 4 "B" oldali UW-nál megállt a robot kar a roll felrakása közben. Kérlek nézzétek meg Köszönöm July 11, 2025 at 4:46 PM, Viczai Tamás : Megyünk July 11, 2025 at 4:54 PM, Shakir (MCS) : @Simon Attila F. A. Still problem exists reel trays blocked. Thank you July 11, 2025 at 4:56 PM, Simon Attila F. A. : Yep. My colleague say: We are working with Korean support to find the cause of the error. The top level is empty with the trays. July 11, 2025 at 4:56 PM, Shakir (MCS) : Noted, Thank you for your information ✅ July 11, 2025 at 4:57 PM, Simon Attila F. A. : Welcome! July 11, 2025 at 5:05 PM, Skwarek Tibor : Trays are goung now July 11, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0):- Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 11, 2025 at 6:03 PM, 김대호 (Kim Dae Ho) invited 이광교 Lee Gwang Gyo, 최민호 (Choi Min Ho) and 김진현 KIM JIN HYEON. July 11, 2025 at 6:04 PM, 김대호 (Kim Dae Ho) : . July 11, 2025 at 6:37 PM, 김대호 (Kim Dae Ho) : Anode presa 8 Please check U/W AGV 8 July 11, 2025 at 6:37 PM, Koska Szilárd János : Anód press 8 nál elakadt az AGV ránéznétek July 11, 2025 at 6:38 PM, Oláh András : 👍🏻 July 11, 2025 at 6:46 PM, 김지수PM(Gyuri)_FA : @fa Please check e0cnva51 thanks July 11, 2025 at 7:22 PM, Yena Valerii : Hello, pls come to Cathode Press 7, something happened with U/W robot, please check it July 11, 2025 at 7:27 PM, Szabadi Miki : Comin July 11, 2025 at 10:26 PM, Kozma István : Sziasztok, Katód 2 használhatjuk az AGV t? July 11, 2025 at 10:27 PM, Dániel Hufnágel : Igen, természetesen July 11, 2025 at 11:52 PM, Kozma István : Anód jumbóraktárba kérnék segítséget July 11, 2025 at 11:53 PM, Szabadi Miki : Megyünk July 12, 2025 at 12:10 AM July 12, 2025 at 12:10 AM, Hári Zoltàn : Szasztok! Gyertek legyszi an9d 2 fotocellas ajtohoz. All az egyik agv! Koszi! July 12, 2025 at 12:10 AM, Hári Zoltàn : Coater July 12, 2025 at 12:11 AM, Oláh András : Megyünk July 12, 2025 at 12:26 AM, Hári Zoltàn : Anod 2 roll raktarban all egy agv! Nezzetek ra legyszi! Koszi! July 12, 2025 at 12:32 AM, Oláh András : Jövünk July 12, 2025 at 12:33 AM, Kozma István : Már az anód 3 előtt is áll 2 agv July 12, 2025 at 12:41 AM, Koska Szilárd János : gyertek légyszives katód press 2 -nél nemveszi le az anyagot az AGV -ről U/W nél July 12, 2025 at 12:41 AM, Oláh András : Kis türelem coating prioba van July 12, 2025 at 12:47 AM, 김대호 (Kim Dae Ho) : Cathode press 3 Agv error check please July 12, 2025 at 1:07 AM, Semenszki Péter : Sziasztok! Coating anód 1-re kitudnátok jönni? July 12, 2025 at 1:07 AM, Szabadi Miki : Igen mindjárt megyünk July 12, 2025 at 3:17 AM, Kozma István : Anód 2 Coating transzfer probléma. Gyertek legyszi July 12, 2025 at 3:17 AM, Oláh András : Megyünk July 12, 2025 at 3:20 AM, Kozma István : Bocs katód2 July 12, 2025 at 3:40 AM, Yena Valerii : pls come to Cathode Press 7, something happened with U/W robot, please check it July 12, 2025 at 3:45 AM, Kozma István : Tudtok jönni a fóliaraktárhoz, agv probléma July 12, 2025 at 3:45 AM, Oláh András : Jövünk July 12, 2025 at 7:22 AM, Czél Tamás : Sziasztok Katód Slitt 1-en nem olvasta be a reeltálca számát a gép, így nem viszi el az anyagot Kérlek gyertek. Köszönöm July 12, 2025 at 7:22 AM, Viczai Tamás : Megyek July 12, 2025 at 12:48 PM, Czél Tamás : Sziasztok Katód Slitt 3-on nem jó a transfer. Kérlek nézzétek meg Köszönöm July 12, 2025 at 12:48 PM, Skwarek Tibor : Itt vagyok July 12, 2025 at 6:27 PM, Mohammad Amir : Good evening everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:27 Cathode:00 Slitter 3:- Anode:01 Cathode:05 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:118 Cathode:04 Press 3/4:- Anode:09 Cathode:101 Thank you very much! July 12, 2025 at 6:29 PM, Mohammad Amir : Dear @All, For your information:- Unfortunately we don't have enough rolls in the warehouse that's why jobs are not getting created for Cathode Slitter 1&2. As soon as Rolls will be available jobs will be created for Slitter cathode 1&2 as we already have Roll request from these machines. Thank you very much! July 12, 2025 at 7:32 PM, 오승주 : There is an AGV problem with the anode 1 line. Please check it. July 12, 2025 at 7:32 PM, Oláh András : Coming July 12, 2025 at 7:33 PM, Szabadi Miki : Press, slitt, coater? July 12, 2025 at 7:33 PM, 오승주 : Sorry, coater July 12, 2025 at 7:33 PM, Szabadi Miki : Okay coming July 12, 2025 at 7:57 PM, ~Lidiia~리디 ~ : Hello, Anode press 3, U/W transfer problem. Please check this, thank you July 12, 2025 at 7:58 PM, Kiss Balázs F.A. : Oké July 12, 2025 at 9:39 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_6217 Servo motor alarm occured. Thank you! July 12, 2025 at 9:40 PM, ~Lidiia~리디 ~ : @FA Anode slitt 5 there was a problem with the transfer on the conveyor. Please check this. Thank you July 12, 2025 at 9:46 PM, 김대호 (Kim Dae Ho) : Cathode sliter 4 Conveyor Error check please July 12, 2025 at 9:47 PM, Szabadi Miki : Checking July 12, 2025 at 9:59 PM, Mohammad Amir : Dear @All, Next LOT available Electrode Slitter 1/2/4/5:- Anode:25 Cathode:00 Slitter 3:- Anode:00 Cathode:05 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:121 Cathode:02 Press 3/4:- Anode:02 Cathode:95 Thank you very much! July 12, 2025 at 10:02 PM, Mohammad Amir : Dear @All, For your kind information:- Unfortunately we don't have enough rolls in the warehouse that's why jobs are not getting created for Cathode Slitter 1&2. As soon as Rolls will be available jobs will be created for Slitter cathode 1&2 as we already have Roll requests from these machines. Thank you very much! July 12, 2025 at 10:21 PM, ~Lidiia~리디 ~ : @FA There is a problem on the anode stock of large coils on E0STKA34 please check this, thank you July 12, 2025 at 10:23 PM, ~Lidiia~리디 ~ : @FA There is a problem with the transfer on the conveyor on the anode slitt 5. Please check this. Thank you July 12, 2025 at 10:24 PM, Oláh András : Coming July 12, 2025 at 10:29 PM, Farkas Dániel Elekt : Anod1 robot.problema gyertek legyszives July 12, 2025 at 10:30 PM, Szabadi Miki : Megyünk July 12, 2025 at 10:31 PM, Farkas Dániel Elekt : Megoldodott koszi July 12, 2025 at 10:37 PM, Yena Valerii : please check E0STKC35, and other robots too, thanks July 12, 2025 at 10:38 PM, Oláh András : We will check July 12, 2025 at 10:40 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_1186 Servo motor alarm occured. Thank you! July 12, 2025 at 11:15 PM, Mohammad Amir : Dear @All, We are releasing some empty trays from STKA51 to keep the production smooth. As there are shortages of empty trays and STKA52 is quite busy. Thank you very much! July 12, 2025 at 11:36 PM, Mohammad Amir : Dear @All, Update :- As now there are enough empty trays available on the CNVA51 and now production is smooth so we are making the process back to normal . ✅ Thank you very much! July 12, 2025 at 11:53 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_1186 Servo motor alarm occured. Thank you very much! July 12, 2025 at 11:59 PM, duzzaman Md (MCS) : Dear @All, Next LOT available Electrode Slitter 1/2/4/5:- Anode:25 Cathode:00 Slitter 3:- Anode:01 Cathode:07 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:121 Cathode:02 Press 3/4:- Anode:227 Cathode:92 Thank you very much! July 13, 2025 at 12:55 AM July 13, 2025 at 12:55 AM, ~Lidiia~리디 ~ : Slitt cathode 1 conveyor problem. Please check this. Thank you July 13, 2025 at 1:09 AM, duzzaman Md (MCS) : @FA Please E0CNVC51_1186 Servo motor alarm occured. Thank you very much ! July 13, 2025 at 1:13 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVC51_08_052/053 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 13, 2025 at 1:13 AM, Oláh András : Checking July 13, 2025 at 1:29 AM, duzzaman Md (MCS) : @FA Please check E0STKC33_C01 IPS sensor reading fails. Thank you! July 13, 2025 at 1:29 AM, Oláh András : Checking July 13, 2025 at 2:52 AM, 김대호 (Kim Dae Ho) : Cathode press 7 Can you cancel U/w u/r? July 13, 2025 at 2:52 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 2:53 AM, Mohammad Amir : Currently Roll is on the AGV#16 so I am cancelling the task and sending the Roll back to warehouse. Thank you very much! July 13, 2025 at 2:55 AM, Mohammad Amir : Hello, Job has been cancelled successfully ✅ I have sent the Roll back to Warehouse so that this AGV can be free to be used in Production again. Thank you very much! July 13, 2025 at 3:00 AM, 김대호 (Kim Dae Ho) : Thank you !! 👍 July 13, 2025 at 3:57 AM, 김대호 (Kim Dae Ho) : Anode press 3 R/W Error check please July 13, 2025 at 3:57 AM, Oláh András : Wait a bit we are at powder load July 13, 2025 at 5:00 AM, Kozma István : Sziasztok, Katód Coating mosó előtt elfáradt 1 AGV July 13, 2025 at 5:03 AM, Novák Károly F. A. : Megyek July 13, 2025 at 5:04 AM, Kozma István : Közben ittermett 1 sárga sapkás kolega, próbálja megoldani July 13, 2025 at 5:22 AM, Kozma István : Anod 1 coater agv problema! Gyertek legyszi! Koszi! July 13, 2025 at 5:24 AM, 송치섭 : @fa 한국분 계시면 음극 코팅 1라인으로 와주세요 July 13, 2025 at 5:26 AM, 송치섭 : Coating anode 1 line solved July 13, 2025 at 5:27 AM, 김대호 (Kim Dae Ho) : Cathode press 2 U/W Error check please July 13, 2025 at 5:31 AM, Kozma István : Sziasztok, Katód Coating mosó előtt újra elfáradt 1 AGV July 13, 2025 at 5:32 AM, Kiss Balázs F.A. : Oksa July 13, 2025 at 5:33 AM, Koska Szilárd János : sziasztok gyertek légyszives anód press 1 hez megállt a R/W nél a leszedő robot July 13, 2025 at 7:07 AM, 지찬우 : Anode slitt 5 RW Please check the runtime over July 13, 2025 at 7:08 AM, Viczai Tamás : Megyek July 13, 2025 at 7:12 AM, Oláh Rajmund : Gyertek légyszives anode slitt 2 July 13, 2025 at 8:47 AM, Baek Hojong(백호종)FA : @Simon Attila F. A. E0CNVA 51 AN Not moving check plz July 13, 2025 at 8:48 AM, Skwarek Tibor : Checking July 13, 2025 at 8:52 AM, Skwarek Tibor : Moving now July 13, 2025 at 12:05 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC13 “Hoist time over error” Thank you July 13, 2025 at 12:05 PM, Simon Attila F. A. : Checking... July 13, 2025 at 12:06 PM, Simon Attila F. A. : Done! July 13, 2025 at 12:13 PM, Zsmenyák György : Sziasztok anód oldalon press 4 egy AGV kiált hibára July 13, 2025 at 12:13 PM, Viczai Tamás : Oké July 13, 2025 at 2:51 PM, 지찬우 : Cathode press7 UW Please check the error July 13, 2025 at 2:52 PM, Skwarek Tibor : Checking July 13, 2025 at 2:58 PM, Skwarek Tibor : Done July 13, 2025 at 3:41 PM, 지찬우 : Cathode press7 UW Please check the error July 13, 2025 at 3:42 PM, Skwarek Tibor : Checking July 13, 2025 at 6:00 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0): - Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kasztel Balázs, Kovács Szabika Modul(2): Nagy Gábor, Martina Dávid July 13, 2025 at 6:58 PM, Mohammad Amir : Good evening Everyone, Next LOT available Electrode Slitter 1/2/4/5:- Anode:20 Cathode:04 Slitter 3:- Anode:18 Cathode:11 \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Press 1/2/7/8:- Anode:130 Cathode:01 Press 3/4:- Anode:230 Cathode:60 Thank you very much! July 13, 2025 at 7:21 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_052/053 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 13, 2025 at 7:26 PM, Mohammad Amir : Good evening @FA, Please check 08_052/053 it is in Manual mode that's why materials recovery has stopped. Please make it Auto,there is a traffic on the CNV. Thank you very much! July 13, 2025 at 7:31 PM, Oláh András : It is going now 👍🏻 July 13, 2025 at 7:31 PM, Mohammad Amir : Thank you very much! July 13, 2025 at 7:38 PM, ~Lidiia~리디 ~ : Hello, There was a problem with the transfer on the conveyor on the slitt 4 cathode. Please check this. Thank you July 13, 2025 at 7:40 PM, Koska Szilárd János : Sziasztok kitudnátok jönni katód press 7 re RW-nél megállt a robot July 13, 2025 at 7:41 PM, Oláh András : Másik hibán vagyunk de mindjárt megyünk July 13, 2025 at 7:42 PM, Koska Szilárd János : rendben köszönöm szépen July 13, 2025 at 7:50 PM, 이광교 Lee Gwang Gyo : Please check the u/w alarm of the cathode press unit 7 July 13, 2025 at 8:02 PM, Mohammad Amir : Dear @All, I am releasing some empty trays from STKA51 to keep the production smooth. As there are shortages of empty trays in slitter process and STKA52 is quite busy. Thank you very much! July 13, 2025 at 8:52 PM, Turianytsia Olesia : A szállítószalag elakadt Anode slitt July 13, 2025 at 8:53 PM, Oláh András : Checking July 13, 2025 at 9:02 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_P12/06_301/06_307/P07 these are OOS. Please check these on priority. Thank you very much ! July 13, 2025 at 9:07 PM, Szabadi Miki : these sections of the CV are out of use 6300-6311 July 13, 2025 at 9:09 PM, duzzaman Md (MCS) : Thank you very much for informing. In mcs, we can see, there is carrier there. July 13, 2025 at 9:11 PM, Szabadi Miki : Very welcome July 13, 2025 at 9:21 PM, ~Lidiia~리디 ~ : Cathode press 7 U/W transfer has a problem. Please check this, thank you @FA July 13, 2025 at 9:21 PM, Koska Szilárd János : sziasztok Katód press 7 nél az UWnél AGV kiállt hibára rá néznétek köszi July 13, 2025 at 9:23 PM, 최민호 (Choi Min Ho) : Annode 8 AGV 7 Error check please July 13, 2025 at 9:23 PM, 최민호 (Choi Min Ho) : Anode Press 8. July 13, 2025 at 9:26 PM, 김대호 (Kim Dae Ho) : Anode reel delivery is delayed Check please July 13, 2025 at 9:27 PM, 김대호 (Kim Dae Ho) : The conveyor on the second floor is full of reels July 13, 2025 at 9:29 PM, Szabadi Miki : Katod slitt nagy cv-nél vagyunk July 13, 2025 at 9:30 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51 it's OOS. Reel delivery is being hampered. Thak you very much ! July 13, 2025 at 9:32 PM, Szabadi Miki : Working on it July 13, 2025 at 9:34 PM, 김대호 (Kim Dae Ho) : The same error occurred July 13, 2025 at 9:36 PM, 김대호 (Kim Dae Ho) : Can't we take accurate action on Cathode press 7? 양극 프레스 7호기 U/W 이재기에서 B터렛 척킹 후 이재기가 나가지 못하는 에러가 며칠째 반복되고 있습니다. July 13, 2025 at 9:38 PM, duzzaman Md (MCS) : Dear @FA Please check E0STKA51 and A52 STK, both C02 are OOS. Thank you very much July 13, 2025 at 9:42 PM, Yena Valerii : Hello, near anode press 8 something happened with robot agv, please check July 13, 2025 at 9:58 PM, duzzaman Md (MCS) : Dear @FA Please check Port E0STKC34_P01 is OOS, Auto Step 01 Time over. One job to press is getting delayed. Thank you very much for your attention! July 13, 2025 at 9:58 PM, Mohammad Amir : Job for Cathode Slitter -1 is getting delayed. Thank you very much! July 13, 2025 at 10:01 PM, Szabadi Miki : Checking July 13, 2025 at 10:48 PM, 김대호 (Kim Dae Ho) : Please check the Anode sliter tray July 13, 2025 at 10:49 PM, Mohammad Amir : Hello, We are releasing some empty trays from STKA51 to keep the production smooth. As there are shortages of empty trays in slitter process and STKA52 is quite busy. Thank you very much! July 13, 2025 at 10:50 PM, 김대호 (Kim Dae Ho) : So is the tray coming? July 13, 2025 at 10:50 PM, Mohammad Amir : Yes ,empty trays on the way. ✅ Thank you very much! July 13, 2025 at 10:53 PM, 김대호 (Kim Dae Ho) : Even if Stalker 52 is busy, Don't you have any? It's been 10 minutes since Sliter 2 stopped. July 13, 2025 at 10:54 PM, Mohammad Amir : We have released from STKA51 manually and on top of that we have increased the priority of empty trays delivery from STKA52. So soon hopefully situation will change. We are monitoring this area with extra precautions. Thank you very much! July 13, 2025 at 10:55 PM, 김대호 (Kim Dae Ho) : Thank you July 13, 2025 at 10:55 PM, Mohammad Amir : You are welcome! July 13, 2025 at 10:55 PM, 김대호 (Kim Dae Ho) : Anode sliter 4 Please check the location of the tray. Please check why the alarm doesn't appear. @Fa July 13, 2025 at 10:56 PM, duzzaman Md (MCS) : We've created jobs from A51 as well with higher priority. However, there are not many trays left in A51. We are increasing priorities for the active jobs from MCS. Thank you very much for your understanding. July 13, 2025 at 10:57 PM, 김대호 (Kim Dae Ho) : Thank you for your help. 👍 July 13, 2025 at 10:57 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 11:00 PM, 김대호 (Kim Dae Ho) : The tray is positioned in a crooked position. However, there is no alarm, and the path of the tray warehousing is blocked. @Fa July 13, 2025 at 11:03 PM, Oláh András : Now its going 👍🏻 July 13, 2025 at 11:19 PM, duzzaman Md (MCS) : Respected Sir's and Esteemed members, Please find the Next LOT available Electrode : Slitter 1/2/4/5:- Anode:17 Cathode:02 Slitter 3:- Anode:13 Cathode:17 ************************************** Press 1/2/7/8:- Anode:117 Cathode:152 Press 3/4:- Anode:203 Cathode:69 Thank you very much for your attention! July 13, 2025 at 11:21 PM, Somoskövy Martin : Sziasztok. Cathode Press 7 U/W-nél nem veszi le az anyagot a robotkar. Ránéznétek? Köszönöm. July 13, 2025 at 11:21 PM, Oláh András : Megyünk July 13, 2025 at 11:35 PM, Oláh András : Beállítottuk a folytoszelepeket a megfogó munkahengerén. Le is teszteltük, most már jó lesz 👍🏻 July 13, 2025 at 11:59 PM, ~Lidiia~리디 ~ : Cathode slitt 4 has a problem transfer conveyor. Please check this, thank you July 14, 2025 at 12:10 AM July 14, 2025 at 12:10 AM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_004/005 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 14, 2025 at 12:11 AM, Szabadi Miki : Done July 14, 2025 at 12:14 AM, duzzaman Md (MCS) : Thank you for your support 🙏 July 14, 2025 at 12:17 AM, Szabadi Miki : Very welcome ✌ July 14, 2025 at 12:19 AM, 김대호 (Kim Dae Ho) : Again... @FA... July 14, 2025 at 12:21 AM, 김대호 (Kim Dae Ho) : @김지수PM(Gyuri)_FA 대응 인원 없으실까요? 현재 B터렛에 들어갈때는 계속 발생합니다. July 14, 2025 at 12:32 AM, 방혁 PM(Bang.Hyuk) FA : @Dániel Hufnágel Dani can you check it? July 14, 2025 at 12:33 AM, Dániel Hufnágel : Yes. But need a moment please July 14, 2025 at 12:33 AM, Oláh András : Need to modify Z axis upper at turret July 14, 2025 at 12:33 AM, Oláh András : Grip always stuck on the bobbin July 14, 2025 at 1:17 AM, Mohammad Amir : Dear @All, Update :- As now there are enough empty trays available on the CNVA51 and now production is smooth so we are making the process back to normal . ✅ Thank you very much! July 14, 2025 at 2:49 AM, 김대호 (Kim Dae Ho) : Please check the error of the Cathode 2f conveyor. July 14, 2025 at 2:51 AM, 김대호 (Kim Dae Ho) : @FA July 14, 2025 at 2:57 AM, Oláh András : Okay coming July 14, 2025 at 3:00 AM, Koska Szilárd János : anód press 6 mellett lerobbant az agv megnéznétek July 14, 2025 at 3:00 AM, Oláh András : Igen July 14, 2025 at 3:20 AM, 김대호 (Kim Dae Ho) : Cathode sliter 1 L/R check please @Mohammad Amir July 14, 2025 at 3:21 AM, Mohammad Amir : For Slitter Cathode 1, Unfortunately we don't have enough Materials in the warehouse. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 14, 2025 at 3:22 AM, 김대호 (Kim Dae Ho) : Hm.. ok Thank you 👍 July 14, 2025 at 3:26 AM, 김대호 (Kim Dae Ho) : Cathode slter 4 Error check please @FA July 14, 2025 at 3:28 AM, 김대호 (Kim Dae Ho) : Again... @FA July 14, 2025 at 3:28 AM, 김대호 (Kim Dae Ho) : This July 14, 2025 at 3:29 AM, Koska Szilárd János : sziasztok ismét kikéne menni katód press 7 re megállt az Agv July 14, 2025 at 4:03 AM, Mohammad Amir : @FA @Szabadi Miki Please check E0CNVA51_P04 there is INV-01 Run Time over error and it is causing blockage in materials recovery resulting material traffic on the CNV. Thank you very much! July 14, 2025 at 4:03 AM, Szabadi Miki : Checking July 14, 2025 at 4:08 AM, ~Lidiia~리디 ~ : Cathode E0STKC34, AGV robot #12, stopped. Please check this. Thank you @FA July 14, 2025 at 5:28 AM, Koska Szilárd János : sziasztok anód sl asztalnál elakadt az agv megnéznétek July 14, 2025 at 6:07 AM, Karina Lyzanets : Sziasztok! Cathode oldalon megállt a conveyor pálya Megnéznétek? Köszönöm szépen July 14, 2025 at 6:11 AM, Shakir (MCS) : Good morning @All @Fa Please check LTC0521 full tray at E0CNVC51_08_020 is not moving for long time and others blocked. From MCS everything good ✅ Thank you July 14, 2025 at 6:13 AM, adambenczik : Megyek July 14, 2025 at 6:14 AM, 임동현 : Cathode sliter 2nd floor conveyor problem caused tray to stop July 14, 2025 at 6:23 AM, adambenczik : Kész July 14, 2025 at 6:30 AM, Karina Lyzanets : Hello! Slitt Cathode 2 no AGV robot 15 min Please check, thank you! July 14, 2025 at 6:30 AM, Shakir (MCS) : Good morning Checking July 14, 2025 at 6:34 AM, Shakir (MCS) : For Slitter Cathode 2, There is no material available in the warehouse. As soon as material will be available it will transfer as we have an active LR since 6:02. Thank you July 14, 2025 at 6:35 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 14, 2025 at 6:35 AM, 임동현 : Please check the error in the anode roll warehouse #2 July 14, 2025 at 6:38 AM, Mr.Miti (미티) FA : Checking! July 14, 2025 at 6:42 AM, Mr.Miti (미티) FA : There is no error, production just left the material here at the manual port without storing it. July 14, 2025 at 6:45 AM, Karina Lyzanets : Thank you very much July 14, 2025 at 6:45 AM, Shakir (MCS) : You’re welcome July 14, 2025 at 6:46 AM, Shakir (MCS) : @FA Please check E0CNVC51_8_020 there is DV-01 Diverter Up error. Thank you July 14, 2025 at 6:47 AM, Mr.Miti (미티) FA : Checking July 14, 2025 at 6:49 AM, Karina Lyzanets : Cathode oldalon megállt a conveyor Nézzetek meg légyszíves, köszi July 14, 2025 at 6:49 AM, Shakir (MCS) : @FA team working on it Thank you July 14, 2025 at 6:54 AM, Mr.Miti (미티) FA : Solved July 14, 2025 at 6:54 AM, Mr.Miti (미티) FA : Solved July 14, 2025 at 6:54 AM, Shakir (MCS) : @FA Please check E0STKA34_P01 is OOS, AGV03 and AGV17 blocked. Thank you July 14, 2025 at 7:00 AM, Mr.Miti (미티) FA : Solved July 14, 2025 at 7:01 AM, Shakir (MCS) : @FA Please check E0CNVC51_P05 there is Data mismatch error Thank you July 14, 2025 at 7:23 AM, adambenczik : Solved July 14, 2025 at 7:32 AM, Shakir (MCS) : For CA : AGV016 on the way to Cathode Slitt2 ✅ Thank you July 14, 2025 at 8:41 AM, 김건희 : @KIM SEYEON [김세연]_FA 양극 프래스 7호기 U/W 이재기 agv에서 roll 뜨고 나서 한번 씩 멈춘다고 합니다 확인 부탁드립니다 July 14, 2025 at 8:49 AM, 김정희(Jeong hee FA) invited 윤정은. July 14, 2025 at 9:07 AM, KIM SEYEON [김세연]_FA : 네 확인해보겠습니다. July 14, 2025 at 9:43 AM, Anastasiia~~ : hello, there are no trays on the anode slitt 2 please check July 14, 2025 at 9:46 AM, Sazzad Bhai SKon : Few trays stuck in the CNV due to BP ports oos near to 6 line slitting. We'll monitor the tray supply July 14, 2025 at 9:46 AM, 지찬우 : 양극프레스 7호기 UW B터렛에 이재기가 롤 척킹 후 타임오버 에러가 뜨면서 멈추는 현상입니다 July 14, 2025 at 9:47 AM, Anastasiia~~ : Thanks July 14, 2025 at 9:59 AM, Sazzad Bhai SKon : @FA Please check input port of CNV E0CNVA51_P05. July 14, 2025 at 10:34 AM, Karina Lyzanets : Cathode oldalon megállt a conveyor Nézzetek meg légyszíves, köszi July 14, 2025 at 10:38 AM, adambenczik : Kész July 14, 2025 at 11:25 AM, Sazzad Bhai SKon : @FA please check the port again July 14, 2025 at 11:27 AM, Sazzad Bhai SKon : Working now July 14, 2025 at 11:40 AM, waseem/ Iváncsa Fa : This message was deleted. July 14, 2025 at 11:42 AM, Karina Lyzanets : Cathode oldalon megállt a conveyor Nézzetek meg légyszíves, köszi July 14, 2025 at 11:57 AM, Shakir (MCS) : @FA @Mr.Miti (미티) FA Please investigate Port E0CNVC51_08_020, as it has experienced multiple instances of downtime over the past several hours. Below is the recorded history: 00:49-00:53 -OOS. 02:43-3:01 -OOS. 6:42-6:52 -OOS. 10:33-10:37-OOS. 11:38-current -OOS. The issue seems to be frequently triggered by the error: “DV:-01 Diverter Up Error”, which is significantly affecting full tray recovery. Kindly prioritize the investigation of this ports. Thank you July 14, 2025 at 11:58 AM, cehmannzsoltcehmann : Kész July 14, 2025 at 12:00 PM, 임동현 : Cathode press 2 U/W robot stopped July 14, 2025 at 12:01 PM, Karina Lyzanets : Köszönöm szépen July 14, 2025 at 12:08 PM, Sazzad Bhai SKon : Anode empty tray supply is normal now. July 14, 2025 at 12:10 PM, Anastasiia~~ : Thank you very much July 14, 2025 at 12:15 PM, Karina Lyzanets invited Anetta Kunak. July 14, 2025 at 12:16 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_006/07, run time over error. Thank you July 14, 2025 at 12:17 PM, Anastasiia~~ : the conveyor stopped on anode side please check July 14, 2025 at 12:17 PM, cehmannzsoltcehmann : Done July 14, 2025 at 12:23 PM, adambenczik : Solved July 14, 2025 at 12:39 PM, Magyar Dániel : Sziasztok, gyertek légyszi Coating katód 1-es sorra. 2-es rw-nél nem veszi le a rollt a kar. July 14, 2025 at 12:39 PM, adambenczik : Jövök July 14, 2025 at 12:42 PM, adambenczik : Kész July 14, 2025 at 12:44 PM, Magyar Dániel : Köszönöm! July 14, 2025 at 1:49 PM, Karina Lyzanets : Hello! Cathode oldalon nem érkeznek a tálcák, nézzetek meg kérlek Köszönöm July 14, 2025 at 1:50 PM, Sazzad Bhai SKon : Checking July 14, 2025 at 1:52 PM, Sazzad Bhai SKon : There are lots of pending jobs. We'll increase priority and monitor this area July 14, 2025 at 1:52 PM, Shakir (MCS) : @Fa Please check STKC51 both crane not moving. Thank you July 14, 2025 at 1:53 PM, Karina Lyzanets : Thank you! July 14, 2025 at 1:53 PM, Shakir (MCS) : @Mr.Miti (미티) FA please check on priority July 14, 2025 at 2:27 PM, Shakir (MCS) : Update : As now there are enough empty trays available on the CNVC51. we are making the process back to normal . ✅ Thank you July 14, 2025 at 3:01 PM, Sazzad Bhai SKon : Cathode empty tray supply is normal now July 14, 2025 at 3:46 PM, Karina Lyzanets : Cathode oldalon megállt a conveyor Nézzetek meg légyszíves, köszi July 14, 2025 at 3:48 PM, Mr.Miti (미티) FA : Nézem July 14, 2025 at 3:52 PM, Mr.Miti (미티) FA : Solved July 14, 2025 at 6:09 PM, MCS/RTD System : Dear @FA Good evening! Could you please check E0CNVC51_08_020 DV-01 diverter error since 17:24 Please check. Thank you very much ! July 14, 2025 at 6:21 PM, Dana Honak : Cathode slitt . Convejor stop. July 14, 2025 at 6:30 PM, Szarka Adrián : Sziasztok anod Nc reel raktarhoz költözünk. 90 darab reel szemünk ki. Köszönöm July 14, 2025 at 6:39 PM, Dana Honak : ! July 14, 2025 at 6:59 PM, Czeilinger Krisztián : Kész July 14, 2025 at 7:15 PM, Rácz Dániel / FA : This message was deleted. July 14, 2025 at 10:31 PM, Dana Honak : Cathode slitt . Convejor stop. July 14, 2025 at 10:58 PM, Viktoriia Hleba : Anod slit 2 nincs tarca July 14, 2025 at 10:59 PM, Csicskovics Balázs : Cathode press 2-nél egy AGV pihenget. Gyertek légyszives küldjétek az útjára. Köszönöm July 14, 2025 at 11:06 PM, Viktoriia Hleba : Please check July 14, 2025 at 11:09 PM, MCS/RTD System : Cranes were inactive for a while. Problem solved now. You'll start receiving them soon. Thank you so much for your patience. Let us know anytime if need further assistance. July 14, 2025 at 11:18 PM, Viktoriia Hleba : 2 slitter anode Csak egy van tálca, mások nem jönnek. Kérem, nézze meg! Köszönöm. July 14, 2025 at 11:20 PM, MCS/RTD System : More on the way. Thank you very much! July 14, 2025 at 11:27 PM, Viktoriia Hleba : Anode slit 3 nincs tarca July 14, 2025 at 11:27 PM, Viktoriia Hleba : please check July 14, 2025 at 11:28 PM, MCS/RTD System : Martial flow started. It will be normalized soon. Thank you very much for your patience and understanding 🙏 July 14, 2025 at 11:33 PM, 김대호 (Kim Dae Ho) : It's already been 40 minutes since the facility stopped. When will it be coming? July 14, 2025 at 11:34 PM, 박정근(Park) : pls hlep Anode 1Line coater July 14, 2025 at 11:35 PM, MCS/RTD System : We are releasing some from STKA51 manually and on top of that we have increased the priority of empty trays delivery from STKA52. So soon hopefully situation will change. We are monitoring this area with extra precautions. Thank you very much! July 14, 2025 at 11:53 PM, Szarka Adrián : Anod slitt conveer stop July 14, 2025 at 11:53 PM, Szarka Adrián : Legyszives nézzetek meg 😘😘😘 July 14, 2025 at 11:53 PM, Viktoriia Hleba : Anod slitt conveer stop please check July 14, 2025 at 11:54 PM, Czeilinger Krisztián : Megyünk July 15, 2025 at 1:01 AM July 15, 2025 at 1:01 AM, 제범 : Please check coating cathode1 agv July 15, 2025 at 1:01 AM, Nagy Dávid 4 : Anod reel raktárhoz kérnék szépen segítséget 10 port help help köszönöm szépen July 15, 2025 at 1:01 AM, Viktoriia Hleba : Anode slitt 3 nincs tarca July 15, 2025 at 1:02 AM, Viktor Vadas : Nem jon AGV, katod 1re July 15, 2025 at 1:02 AM, Viktor Vadas : Egyik rewinderre sem July 15, 2025 at 1:03 AM, Viktoriia Hleba : Anod slit 2 nincs tarca July 15, 2025 at 1:04 AM, Böröcz Tamás : Küldtem egyet a raktár felőlire July 15, 2025 at 1:04 AM, Böröcz Tamás : De a uw felőli porton nem látok jumbot July 15, 2025 at 1:05 AM, Viktor Vadas : Upszi arra most nem kell😂 ott vegzett az AGV July 15, 2025 at 1:05 AM, Böröcz Tamás : @Viktoriia Hleba July 15, 2025 at 1:05 AM, Böröcz Tamás : @MCS/RTD System July 15, 2025 at 1:05 AM, Viktor Vadas : Koszonom! July 15, 2025 at 1:08 AM, MCS/RTD System : STK 52 is busy with many jobs. We are currently releasing some manually from STKA51 as not many trays are there. Additionally, we are increasing the priority for the delivery of empty trays from STKA52 to help stabilize the flow. We are hopeful that these actions will lead to an improvement in the situation shortly. It's just too many jobs in the STK. Please rest assured that this area is being monitored with heightened attention and care. Thank you for your continued support and understand July 15, 2025 at 1:22 AM, MCS/RTD System : *thank you for your continued support and understanding. Some empty trays are already on the way. We are actively monitoring. Thank you very much. July 15, 2025 at 1:33 AM, 제범 : AGV not come coating cathode1 1st r/w July 15, 2025 at 1:36 AM, Viktor Vadas : Ugyanugy nem jon AGV az 1-es rewinderre katod 1-en July 15, 2025 at 1:37 AM, Viktor Vadas : @Böröcz Tamás @Czeilinger Krisztián July 15, 2025 at 1:38 AM, Czeilinger Krisztián : Szüneten vagyok. July 15, 2025 at 1:38 AM, MCS/RTD System : @FA please check E0STKA51_C02 Load oversize error. Please check it on priority. Thank you very much for your quick support. July 15, 2025 at 1:38 AM, Szarka Adrián : Sziasztok légyszíves nézzetek meg anod Slitt 2 gépre nem jön a talca 40 perce July 15, 2025 at 1:39 AM, Szarka Adrián : A másik Slitt gépre meg megy. Köszönöm July 15, 2025 at 1:42 AM, Czeilinger Krisztián : Megyek oda July 15, 2025 at 1:50 AM, Viktoriia Hleba : 2 slitter anode Csak egy van tálca, mások nem jönnek. Kérem, nézze meg! Köszönöm. July 15, 2025 at 1:54 AM, 제범 : 양극1라인 agv 모두 리와인더 앞에서 멈춰있습니다 대응인원이 아무도 안왔습니다 지금 내리지 못하면 라인 세워야합니다 July 15, 2025 at 1:56 AM, 방혁 PM(Bang.Hyuk) FA : 다시 기동합니다 July 15, 2025 at 1:58 AM, 방혁 PM(Bang.Hyuk) FA : @FA Please check coater CA AGV 11,08 July 15, 2025 at 2:00 AM, MCS/RTD System : Dear Viktoriia, Both 51 and 52 are OOS. Please wait. Dyakuyu! July 15, 2025 at 2:01 AM, 방혁 PM(Bang.Hyuk) FA : I know we got a some problem July 15, 2025 at 2:06 AM, Viktoriia Hleba : Anod conveer stop please check July 15, 2025 at 2:16 AM, Csicskovics Balázs : @Rácz Dániel / FA mi a helyzet a cathode press 7 U/W robottal? July 15, 2025 at 2:17 AM, Böröcz Tamás : RIP July 15, 2025 at 2:17 AM, Rácz Dániel / FA : Nem tudom, én a coatingon vagyok July 15, 2025 at 2:17 AM, Czeilinger Krisztián : Megyek oda. July 15, 2025 at 2:19 AM, Viktoriia Hleba : Anód slitt 1 nincs tàlca July 15, 2025 at 2:19 AM, Szarka Adrián : @김대호 (Kim Dae Ho) the empty reel trays are not coming. production is going very slowly July 15, 2025 at 2:19 AM, Czeilinger Krisztián : A koreaiak karbantartó csapat ott van. July 15, 2025 at 2:21 AM, 방혁 PM(Bang.Hyuk) FA : Solved July 15, 2025 at 2:26 AM, 방혁 PM(Bang.Hyuk) FA : 전극동 프레스 담당 한국인 있으신가요 July 15, 2025 at 2:32 AM, Viktor Vadas : Katod 1 1-es rewinderhez kernek segitseget, a transfer nem jo pozicioban van jelenleg July 15, 2025 at 2:32 AM, Viktor Vadas : Koszonom! July 15, 2025 at 2:42 AM, Szarka Adrián : Anod Slitt 1 nincs reel tálca Anod Slitt 2 nincs reel tálca Anod Slitt 3 nincs reel tálca July 15, 2025 at 2:43 AM, Dana Honak : Cathode slitt . Convejor stop. July 15, 2025 at 2:43 AM, Czeilinger Krisztián : @MCS/RTD System please check. July 15, 2025 at 2:44 AM, Rácz Dániel / FA : Túl sok a feladat az Anód 51-52 es raktárban. Ez miatt a teli reel tálcák is lassan mennek be. July 15, 2025 at 2:44 AM, MCS/RTD System : Earlier STKs were OOS and too many jobs on the STKs. Now, materials started flowing. We are monitoring it. Thank you ! July 15, 2025 at 2:46 AM, Szarka Adrián : okay. but we can't produce like this because it's so slow. we have to provide Assy with the raw material, and this problem is a regular problem. July 15, 2025 at 2:48 AM, Szarka Adrián : Tele van anod konvejor szalag is a felhalmozott reel kel. Azt se viszi a konvejor szalag July 15, 2025 at 2:48 AM, Rácz Dániel / FA : Mind a két raktárhoz vezető félszint is tele van. July 15, 2025 at 2:49 AM, Szarka Adrián : @Csicskovics Balázs nálad van a fényképező ? July 15, 2025 at 2:49 AM, Szarka Adrián : Majd 3 év múlva talán meg tudják csinálni hogy működjön is a rendszer. July 15, 2025 at 2:49 AM, Csicskovics Balázs : Coatingon van @Szappanos Gábor ! July 15, 2025 at 2:49 AM, MCS/RTD System : Thank you for your feedback. We understand the concerns regarding the production speed and its impact on supplying Assy with raw materials. Unfortunately, its not on us. We do our best to keep it as smooth as possible. As this is a recurring issue, we will forward the matter to the competent authority for further review. Kindly do the same from your side to ensure timely resolution. Thank you very much! July 15, 2025 at 2:50 AM, Viktor Vadas : Gabor szerint pressen van! July 15, 2025 at 2:50 AM, Viktor Vadas : Anodon July 15, 2025 at 2:50 AM, Rácz Dániel / FA : Egyetlen egy szabadhely nincs a félszinten így addig a hosszú conveyoron várakoznak a teli reelek. Értelem szerűen az üresek is lassan érkeznek mert le van terhelve mind a 2 db raktár. July 15, 2025 at 2:50 AM, Viktoriia Hleba : anode convejor stop July 15, 2025 at 2:51 AM, Rácz Dániel / FA : Igen tudjuk és látjuk is de mi innen nem tudunk mit tenni. July 15, 2025 at 2:51 AM, Szappanos Gábor : Leraktam press anód asztalra, Adrián gepe mellé. July 15, 2025 at 2:51 AM, Szarka Adrián : Tényleg 🤣🤣🤣🤣 July 15, 2025 at 2:58 AM, Böröcz Tamás : Ha reportálni akarjátok nyugodtan írjátok bele hogy a katód oldalon nincs ez de az anódon mindig pedig elméletben minden ugyan az July 15, 2025 at 3:01 AM, 김대호 (Kim Dae Ho) : Yes, this problem continues to occur only during night shift. Why? July 15, 2025 at 3:03 AM, Szarka Adrián : Anod 51 raktár szerintem meg állt monitoron alarm felirat világít @Czeilinger Krisztián July 15, 2025 at 3:04 AM, Czeilinger Krisztián : @Böröcz Tamás . July 15, 2025 at 3:05 AM, VK (mcs) : Issue was in anode STK , and both were out of service. For SCS issues please contact FA team. Thx July 15, 2025 at 3:23 AM, MCS/RTD System : @FA please check E0STKA51_C02 Load oversize error. Thank you very much for your quick support. July 15, 2025 at 3:32 AM, 김대호 (Kim Dae Ho) : 음극 슬리팅 공트레이 지연, 릴트레이 입고지연 으로 음극 슬리팅 설비 전체 정지 되었습니다. (현재까지 음극 슬리팅 2호기의 비가동 발생시간 은 3시간 넘게 발생중입니다) @김건희 @방혁 PM(Bang.Hyuk) FA July 15, 2025 at 3:34 AM, 방혁 PM(Bang.Hyuk) FA : 릴창고 에러발생으로 인해 공급지연되고있습니다. 해결까지 시간이 소요될것 같습니다 July 15, 2025 at 3:36 AM, 김대호 (Kim Dae Ho) : 네 알겠습니다. July 15, 2025 at 3:48 AM, Viktoriia Hleba : Robot problem Anod slit 5 July 15, 2025 at 4:49 AM, Aloshyn Yevhen : Anode press 3 no AGV with material 15 min July 15, 2025 at 4:58 AM, VK (mcs) : @FA Please check Anode roll STK A32 July 15, 2025 at 5:00 AM, Rácz Dániel / FA : E0STKA32_P01 RBA0711 E0STKA32_P01_BP01 RBA2230 July 15, 2025 at 5:02 AM, VK (mcs) : RBA0711 has destination to Press 3 And RBA2230 has destination to the STK. July 15, 2025 at 5:03 AM, Rácz Dániel / FA : Thank you Sir 🫡 July 15, 2025 at 5:04 AM, Viktoriia Hleba : anode convejor stop. Please check July 15, 2025 at 5:05 AM, Rácz Dániel / FA : Manual order ready. AGV #7 going. July 15, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 15, 2025 at 6:15 AM, Shakir (MCS) : Hello Good morning @Mr.Miti (미티) FA Kindly check this issue again. Full trays are getting blocked at this location, and the same issue has been recurring since yesterday, significantly affecting the delivery of full trays. This repeated disruption is impacting the overall flow and needs immediate attention to avoid further delays in operations. Currently LTC1935 not moving since 5:26. Thank you July 15, 2025 at 6:19 AM, Mr.Miti (미티) FA : Good morning! This problem has not only existed since yesterday, but thank you for bringing to my attention what we already knew! Thank you for your hard work! July 15, 2025 at 6:19 AM, Shakir (MCS) : You’re welcome July 15, 2025 at 8:17 AM, Sazzad Bhai SKon : This job is still pending: There's a long pending job for RBC4282 at port C2NCB02_P01. Reason: all Auto ports of 1F roll STK is out of service. July 15, 2025 at 8:44 AM, Sazzad Bhai SKon : Please confirm if this is physically located there July 15, 2025 at 8:59 AM, adambenczik : That is a Notching machine at 1F Assembly July 15, 2025 at 10:06 AM, Anastasiia~~ : Hello , there are no trays on the slitt anode 2, please check July 15, 2025 at 10:06 AM, Shakir (MCS) : We are working on it Thank you July 15, 2025 at 10:33 AM, Shakir (MCS) : Issue Solved ✅ As now there are enough empty trays available on the CNVA51. we are making the process back to normal . Thank you July 15, 2025 at 11:22 AM, Anastasiia~~ : no trays for anode slitt ,please check July 15, 2025 at 11:22 AM, Shakir (MCS) : Working on it July 15, 2025 at 11:24 AM, Mr.Miti (미티) FA : It is quite common these days that there is no empty reel tray in the slit area, even though there is nothing wrong with it. Please check to ensure that production is continuous. July 15, 2025 at 11:25 AM, Shakir (MCS) : We are working Thank you July 15, 2025 at 11:32 AM, Mr.Miti (미티) FA : Thank you! July 15, 2025 at 11:48 AM, Shakir (MCS) : Now, anode empty reel trays delivery normalize and enough trays on Conveyor. Thank you July 15, 2025 at 3:11 PM, MCS/RTD System : @FA Please check E0CNVC51_08078 run time over error. Thank you July 15, 2025 at 3:21 PM, Viczai Tamás : Done July 15, 2025 at 6:25 PM, Dániel Hufnágel : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.15. 9 Tech,+3 overtime 1SL Overtime(3): Szabadi Miklós, Kovács Szabolcs, Hufnágel Dániel Holiday(1): Szücs Géza Imre, Sick(1): Czeilinger Krisztián Shift Change(0): --------------- Electrode(4): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (4): Takács Ádám, Böröczki Balázs, Kovács Szabolcs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbe July 15, 2025 at 6:27 PM, Viktoriia Hleba : sziasztok. 5 slitter anode nem jó szam tálca . Kérem, nézze meg! July 15, 2025 at 6:34 PM, Viktoriia Hleba : 1 slitter anode . Please check . Tray id eror July 15, 2025 at 6:34 PM, Viktoriia Hleba : Nem látja a számot tálca July 15, 2025 at 6:55 PM, Dana Honak : Cathode slitt 1 r/w robot problema . Convejor stop. July 15, 2025 at 7:13 PM, Dana Honak : Cathode slitt Convejor stop. July 15, 2025 at 7:14 PM, Nagy Dávid 4 : anod slitt 2 nincs talca help help köszönöm szépen July 15, 2025 at 7:14 PM, Rácz Dániel / FA : This message was deleted. July 15, 2025 at 7:15 PM, Rácz Dániel / FA : Átirányítva a a Katód 52 es raktárba a teli reelek, mert az 51 es nem győzi. July 15, 2025 at 7:15 PM, Rácz Dániel / FA : @mcs July 15, 2025 at 7:49 PM, VK (mcs) : Anode stockers were out of service. Empty reels are releasing normally, thx July 15, 2025 at 8:07 PM, MCS/RTD System : @FA Please check Anode Roll STKA34 auto port July 15, 2025 at 8:26 PM, Viktoriia Hleba : 5 slitter anode nincs Agv - 15 perc please check July 15, 2025 at 8:29 PM, Aloshyn Yevhen : Anode press 3 no AGV with material 30 min July 15, 2025 at 8:32 PM, 김지수PM(Gyuri)_FA : Now the VC11 is loading the RBA0896 from A34 crane July 15, 2025 at 8:38 PM, Viktoriia Hleba : 30 perc nincs Agv. July 15, 2025 at 8:40 PM, 김지수PM(Gyuri)_FA : VC17 is going there with RBA2575 July 15, 2025 at 8:43 PM, Viktoriia Hleba : anode convejor eror. Please check July 15, 2025 at 9:51 PM, Anton Mashchenko : Come to cathode press 2, AGV position error! Thanks! July 15, 2025 at 9:58 PM, Rácz Dániel / FA : Come to the darkside 😎 July 15, 2025 at 10:18 PM, Aloshyn Yevhen : Anode press 3 no AGV with material 15 min July 15, 2025 at 10:19 PM, Rácz Dániel / FA : @MCS/RTD System please, thans July 15, 2025 at 10:21 PM, VK (mcs) : AGV 25 is on its way July 15, 2025 at 10:36 PM, Viktoriia Hleba : Anod slit 2 nincs tarca July 15, 2025 at 10:41 PM, Rácz Dániel / FA : AGV #19 nem sokára viszi July 15, 2025 at 10:43 PM, Viktoriia Hleba : ? July 15, 2025 at 10:44 PM, Viktoriia Hleba : ! July 15, 2025 at 10:44 PM, Rácz Dániel / FA : Jah bocs ezt benéztem July 15, 2025 at 10:44 PM, Rácz Dániel / FA : @MCS/RTD System July 15, 2025 at 10:46 PM, VK (mcs) : STK A52 was out of service. Empty trays now transferring July 15, 2025 at 10:46 PM, Rácz Dániel / FA : Thany kou July 15, 2025 at 10:48 PM, Aloshyn Yevhen : Anode press 4 no AGV with material 20 min July 15, 2025 at 10:50 PM, Aloshyn Yevhen : Anode press 1 no AGV with material 25 min July 15, 2025 at 10:59 PM, Szabadi Miki : Agv#7 on the way July 15, 2025 at 11:01 PM, Szabadi Miki : @VK (mcs) please check this , thank you! July 15, 2025 at 11:06 PM, VK (mcs) : Carrier is in STK A32 and waiting for AGV July 15, 2025 at 11:07 PM, Szabadi Miki : Thank you, now agv#18 is assigned to it July 15, 2025 at 11:40 PM, Aloshyn Yevhen : Anode press 3 U/W problem with robot July 15, 2025 at 11:49 PM, Csanálosi Gábor FA : Kész July 16, 2025 at 12:41 AM July 16, 2025 at 12:41 AM, Dana Honak : Cathode slitt3 r/w robot problema . Convejor stop. July 16, 2025 at 12:47 AM, Dana Honak : Cathode slitt3 r/w robot problema . Convejor stop.😅 July 16, 2025 at 12:48 AM, Dana Honak : Ismét! July 16, 2025 at 12:49 AM, Dana Honak : !! July 16, 2025 at 1:12 AM, 방혁 PM(Bang.Hyuk) FA invited 보경. July 16, 2025 at 1:14 AM, Rácz Dániel / FA : @Szarka Adrián egy kis egér van a CA roll raktárban és belemegy a boka szenzorba és a daruk lekapcsolnak 😅 July 16, 2025 at 1:14 AM, Böröcz Tamás : Help help July 16, 2025 at 1:14 AM, Rácz Dániel / FA : Nincs tárca July 16, 2025 at 1:44 AM, Viktoriia Hleba : Anod slit 2 nincs tarca July 16, 2025 at 1:45 AM, Szabadi Miki : @VK (mcs) please check , thank you. July 16, 2025 at 1:53 AM, Szabadi Miki : Jön csak lassan , raktáraknak sok a munka July 16, 2025 at 1:55 AM, VK (mcs) : Anode reel conveyor in notching is out of service. I released some empty trays with high priority. July 16, 2025 at 2:48 AM, Aloshyn Yevhen : Anode press 1 R/W problem with robot July 16, 2025 at 2:53 AM, Csanálosi Gábor FA : Kész July 16, 2025 at 2:59 AM, Viktoriia Hleba : Anod slit 2 nincs tarca July 16, 2025 at 3:07 AM, Rácz Dániel / FA : A52es raktárban hiba van July 16, 2025 at 3:08 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 15p July 16, 2025 at 3:10 AM, Rácz Dániel / FA : A #19 AGV viszi July 16, 2025 at 3:14 AM, Viktoriia Hleba : anode slitt 5 . Nincs Agv 15 perc July 16, 2025 at 3:15 AM, Nagy Dávid 4 : Anod press 3 R/W agv pozíció probléma help help köszönöm szépen July 16, 2025 at 3:17 AM, VK (mcs) : No available material July 16, 2025 at 3:20 AM, Rácz Dániel / FA : Kész July 16, 2025 at 3:53 AM, Viktoriia Hleba : Anod slitt1 ninsc AGV 25p July 16, 2025 at 3:53 AM, Dana Honak : Slitt Cathode 1 problem with robot u/w July 16, 2025 at 4:09 AM, Rácz Dániel / FA : Kész July 16, 2025 at 4:09 AM, Rácz Dániel / FA : @MCS/RTD System please check July 16, 2025 at 4:10 AM, VK (mcs) : AGV 11 is on the way July 16, 2025 at 4:11 AM, Rácz Dániel / FA : Thank you July 16, 2025 at 4:35 AM, Dana Honak : Cathode slitt3 r/w robot problema . July 16, 2025 at 4:39 AM, Szabadi Miki : Kész July 16, 2025 at 5:20 AM, Dana Honak : Slitt Cathode 1 problem with robot u/w July 16, 2025 at 5:51 AM, Mohammad Amir : Good morning @FA, Please check E0CNVA51_P04 there is INV-01 Run Time over error and it is causing blockage in materials recovery resulting material traffic on the CNV. Thank you very much! July 16, 2025 at 6:00 AM, Viczai Tamás : Done July 16, 2025 at 6:02 AM, MCS/RTD System : Thank you very much! July 16, 2025 at 6:09 AM, Baek Hojong(백호종)FA : 2025.07.16 / Day Shift (06:00~18:00)] Baek HOJONG 백호종PM • Assy: 김정희, 최명운, 윤정은 • 몽골 1F - Dariimaa (All) GF - Zulaa (ST AN) - Ganaa (ST CA) - Uyanga (VD) - Khaliun (NC) • 방글라데시 - Atik / Ivancsa FA - Nauman/Ivancsa FA • 헝가리 - kovács László 5/ Iváncsa FA July 16, 2025 at 6:11 AM, Mohammad Amir : Good morning everyone, Next LOT available Electrode : Slitter 1/2/4/5:- Anode:00 Cathode:00 Slitter 3:- Anode:31 Cathode:05 ************************************** Press 1/2/7/8:- Anode:02 Cathode:02 Press 3/4:- Anode:124 Cathode:22 Thank you very much ! July 16, 2025 at 8:33 AM, Yanina : Cathode slitt 1 probléma transzfer July 16, 2025 at 8:34 AM, Skwarek Tibor : Megyek July 16, 2025 at 11:44 AM, 주범진 : @JAEYOON KIM / CS 안녕하세요 매니저님 양극롤스토커 1호기 수동입고 시에, 캐리어 아이디 없애고 carrierGen/infeed 후에 mcs buzzer에러 발생하는데, 조치 방법 알려주실 수 있으실까요? July 16, 2025 at 11:54 AM, Lee Junghan(이정한)_CS : 이 MCS Buzzer에러는 왜 못들어가게 알람이 발생하는지 MCS에 먼저 확인해야 할거같네요. July 16, 2025 at 11:55 AM, Mohammad Amir : Dear Sir, Please share me Roll id ,I will examination the reason for MCS buzzer. Thank you very much! July 16, 2025 at 12:04 PM, Mohammad Amir : Dear @All, Next LOT available Electrode : Slitter 1/2/4/5:- Anode:04 Cathode:00 Slitter 3:- Anode:38 Cathode:04 ************************************** Press 1/2/7/8:- Anode:176 Cathode:169 Press 3/4:- Anode:107 Cathode:15 Thank you very much ! July 16, 2025 at 12:05 PM, Mohammad Amir : Dear @All, For your kind information:- We have materials request from Cathode Slitter -2 , however we don't have any Roll available in the warehouse that's why AGV doesn't bring Roll to Cathode Slitter -2. Thank you very much for your understanding. July 16, 2025 at 1:12 PM, 주범진 : Ec1p073f72c9a Thank you July 16, 2025 at 1:12 PM, Mohammad Amir : Sure checking! July 16, 2025 at 1:13 PM, 임동현 : Cathode press 8 R/W Is AGV coming? July 16, 2025 at 1:14 PM, Sazzad Bhai SKon : Yes AGV 01 July 16, 2025 at 1:14 PM, MCS/RTD System : Sir, AGV#14 on the way. Thank you! July 16, 2025 at 1:14 PM, Sazzad Bhai SKon : For u/w July 16, 2025 at 1:20 PM, MCS/RTD System : This message was deleted. July 16, 2025 at 1:24 PM, MCS/RTD System : Dear Sir This Roll is not able to store in the warehouse because we are receiving error from MES side. @MES Please check for ROLL RBC2022 (EC1P073F72C9A)we are receiving that this Roll has already been received from the warehouse error and that's why rackin is not successful. Thank you very much! July 16, 2025 at 1:33 PM, MCS/RTD System : @FA Please check one job is alternated because Cathode press _7_P01 is OOS. Thank you very much! July 16, 2025 at 1:35 PM, Viczai Tamás : under repair July 16, 2025 at 3:35 PM, 주범진 : @오대근 @종상 안녕하세요 확인 부탁드립니다 July 16, 2025 at 3:48 PM, 배병민 (Bae Byoungmin) : @김건희 PM님 안녕하세요 양극 Press#7 이재기 Z축 고장발생 비가동사항 점검 및 리커버리/Test 완료되어 생산 진행 가능하겠습니다. 협조 감사드립니다. July 16, 2025 at 3:51 PM, 김건희 : 감사합니다 July 16, 2025 at 4:28 PM, 종상 : 7.15 00:41:49 창고에 입고 처리되었습니다 July 16, 2025 at 4:29 PM, 주범진 : 제가 11시-12시 사이에 뺐다가 못 넣고 있습니다 July 16, 2025 at 4:39 PM, 종상 : 해당 랏을 mes에서 출고처리하시고 진행하시면 됩니다 July 16, 2025 at 4:50 PM, 종상 : 이거 빼실때 UNKDUP-RBC2022-250715011356B 로 빠졌는데 이렇게 빠져서 해당 랏이 계속 창고에 있는 상태입니다 July 16, 2025 at 4:52 PM, 주범진 : 확인 감사드립니다 July 16, 2025 at 4:55 PM, 지찬우 : Come to please Cathode press8 July 16, 2025 at 5:11 PM, MCS/RTD System : @FA, Please check E0CNVA51_P01 there is INV-01 Run Time over error and it is causing blockage in materials recovery resulting material traffic on the CNV. Thank you very much! July 16, 2025 at 5:19 PM, Mohammad Amir : @FA Please check E0CNVC51_08_052/53 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 16, 2025 at 7:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12+1 Overtime (1):Denkó János Sick (0): - Holiday (2): Kasztel Balázs, Kiss Balázs Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kovács Szabika Modul(2): Denkó János, Martina Dávid July 16, 2025 at 7:07 PM, Erik Gerzsenyi : Anode roll raktar elott megallt a 25-os agv July 16, 2025 at 7:07 PM, Erik Gerzsenyi : Legyszi nezzetek ra July 16, 2025 at 7:07 PM, Oláh András : Megyünk 👍🏻 July 16, 2025 at 7:29 PM, Yena Valerii : Hello, please check why it does not take the finished material from 1 press anode July 16, 2025 at 7:30 PM, Oláh András : Coming July 16, 2025 at 7:31 PM, Shakir (MCS) : AGV18 on the way to Press1 to unload the finished material. Thank you July 16, 2025 at 7:32 PM, Yena Valerii : thanks July 16, 2025 at 7:32 PM, Shakir (MCS) : You’re welcome July 16, 2025 at 7:41 PM, MCS/RTD System : @FA Please check E0STKA34_P01 IPS sensor reading fails. Thank you! July 16, 2025 at 7:41 PM, Oláh András : Checking July 16, 2025 at 9:15 PM, Yena Valerii : pls, come to anode press 1 something happened with R/W robot July 16, 2025 at 9:16 PM, Szabadi Miki : Coming July 16, 2025 at 9:44 PM, (Unknown) left this chatroom. July 16, 2025 at 10:45 PM, Somoskövy Martin : Sziasztok. Anode Slitt 3-nál a conveyoron rossz helyen álltak meg a tálcák több helyen is. Ránéznétek? July 16, 2025 at 10:47 PM, Oláh András : Mindjárt igen July 16, 2025 at 10:47 PM, MCS/RTD System : @FA Please check E0CNVA51_06_001 is OOS. Thank you July 16, 2025 at 10:53 PM, Anton Mashchenko : Cathode press 7, AGV not coming 15 min! Help! Thanks! July 16, 2025 at 10:53 PM, Shakir (MCS) : Checking July 16, 2025 at 10:54 PM, Oláh András : Work with agvs July 16, 2025 at 10:56 PM, Shakir (MCS) : AGV12 on the way to press7 ✅ Thank you July 16, 2025 at 10:57 PM, Anton Mashchenko : Thank you! July 16, 2025 at 10:59 PM, Turianytsia Olesia : A szállítószalag elakadt. Anode slitt 2 July 16, 2025 at 11:00 PM, Oláh András : This message was deleted. July 16, 2025 at 11:08 PM, Anton Mashchenko : Come to cathode press 7, U/W robot stopped! Thanks! July 16, 2025 at 11:14 PM, Anton Mashchenko : Help! July 16, 2025 at 11:15 PM, Oláh András : Coming July 16, 2025 at 11:15 PM, Farkas Dániel Elekt : Sziasztok Anod1 A oldalon az agv nem tudott raallni a toltore es kiallt hibara July 16, 2025 at 11:16 PM, Oláh András : Mindjárt oda is megyünk July 16, 2025 at 11:18 PM, 김지수PM(Gyuri)_FA : @fa E0cnva51 reel on 6008 track is not moving July 16, 2025 at 11:20 PM, Oláh András : @Somoskövy Martin @Erik Gerzsenyi katod press7nél szét kéne nyitni a turretet addig nem tudunk javitani July 16, 2025 at 11:23 PM, MCS/RTD System : @FA Please check E0CNVA51 full reel trays not moving. Thank you July 16, 2025 at 11:23 PM, ~Lidiia~리디 ~ : Hello, on the slitt 2 anode and the second floor of the conveyor is completely full. Please check this. Thank you July 16, 2025 at 11:24 PM, Oláh András : Yes we see July 17, 2025 at 12:04 AM July 17, 2025 at 12:04 AM, Turianytsia Olesia : A transzfergép elakadt, és nem vette fel az anyagot a B oldalról. Anode slitt 2 July 17, 2025 at 12:21 AM, 장정훈 : Confirm that the tray is not moving because there is no conveyor unload request signal July 17, 2025 at 12:22 AM, 장정훈 : @FA Check the panel! July 17, 2025 at 12:23 AM, Turianytsia Olesia : The problem is solved July 17, 2025 at 12:49 AM, Anton Mashchenko : Cathode press 7, AGV not coming 15 min! July 17, 2025 at 12:51 AM, MCS/RTD System : Please press LR, last job completed at 00:24 Thank you July 17, 2025 at 12:51 AM, Oláh András : This message was deleted. July 17, 2025 at 12:52 AM, Anton Mashchenko : The roll is pending I can't press it again LR! July 17, 2025 at 12:53 AM, Anton Mashchenko : AGV arrived, thanks! July 17, 2025 at 12:53 AM, MCS/RTD System : For R/W AGV 14 assigned. Thank you July 17, 2025 at 12:56 AM, Erik Gerzsenyi : CA press 3-ra nezzetek ra kerlek mert valamiert nem hozza a jumbot July 17, 2025 at 12:56 AM, Erik Gerzsenyi : Viszont a press 4-re meg kihozta July 17, 2025 at 12:57 AM, Oláh András : Rendben July 17, 2025 at 12:57 AM, Szabadi Miki : @Shakir (MCS) please check thank you July 17, 2025 at 12:58 AM, Shakir (MCS) : Checking July 17, 2025 at 12:59 AM, Shakir (MCS) : There is No lot available for Press3 CA ✅ Thank you July 17, 2025 at 1:00 AM, Szabadi Miki : Thank you July 17, 2025 at 1:01 AM, Shakir (MCS) : Available Next lot Press 3 CA : 00 AN : 79 Thank you July 17, 2025 at 1:06 AM, Erik Gerzsenyi : But the press 4 is the same model and it produced a jumbo. How is that possible? July 17, 2025 at 1:11 AM, Shakir (MCS) : Yes, it is the same model but According to RTD Next lot for Press 3 : 00 & Press 4 : 44 July 17, 2025 at 1:12 AM, Oláh András : Wow 😅 July 17, 2025 at 1:12 AM, Erik Gerzsenyi : Emoticons July 17, 2025 at 1:12 AM, Erik Gerzsenyi : Lol July 17, 2025 at 1:16 AM, Shakir (MCS) : However Anode side showing same lot 78 material for both 3&4 press. July 17, 2025 at 1:23 AM, Erik Gerzsenyi : Nice 😅 July 17, 2025 at 1:24 AM, Anton Mashchenko : Cathode press 7, AGV not coming 20 min! Help! July 17, 2025 at 1:24 AM, Szabadi Miki : UW or RW? July 17, 2025 at 1:24 AM, Anton Mashchenko : U/W and R/W July 17, 2025 at 1:25 AM, Shakir (MCS) : AGV12 on the way for U/W Thank you July 17, 2025 at 1:26 AM, Shakir (MCS) : For R/W AGV09 on the way July 17, 2025 at 1:26 AM, Erik Gerzsenyi : Anod reelraktar lerobbant July 17, 2025 at 1:26 AM, Erik Gerzsenyi : Daru nem mozog az M9-es portnal July 17, 2025 at 1:26 AM, Erik Gerzsenyi : Legyszi nezzetek ra July 17, 2025 at 1:28 AM, Szabadi Miki : Mindjárt megy a segitség July 17, 2025 at 2:23 AM, 김지수PM(Gyuri)_FA : @fa Please check e0cnvc51 July 17, 2025 at 2:27 AM, Oláh András : 👍🏻 July 17, 2025 at 3:05 AM, Erik Gerzsenyi : Katod press3 R/W- hez kernek segitseget July 17, 2025 at 3:08 AM, Szabadi Miki : Megyünk July 17, 2025 at 3:18 AM, Yena Valerii : Hello, pls check what happened with E0STKA34 July 17, 2025 at 4:00 AM, Farkas Dániel Elekt : Anod roll raktarba nem viszik be az anyagot a daruk.a z agvk tele vannak es koroznek Kezd dugo lenni July 17, 2025 at 4:02 AM, Szabadi Miki : Megyünk July 17, 2025 at 5:06 AM, Shakir (MCS) : @FA Please check empty reel tray stuck nor moving at E0STKC52_P02_OP01. Thank you July 17, 2025 at 5:06 AM, Shakir (MCS) : @Oláh András please check July 17, 2025 at 5:06 AM, Oláh András : Im at powder load now. July 17, 2025 at 5:07 AM, Oláh András : @Szabadi Miki July 17, 2025 at 5:26 AM, MCS/RTD System : @Szabadi Miki please check this on priority. Thank you July 17, 2025 at 6:02 AM, MCS/RTD System : Dear @FA, This issue still exists ,please check. Thank you! July 17, 2025 at 6:08 AM, Mohammad Amir : Dear @All, Good morning, There is an issue in that's why trays are not coming out automatically from STKC52. So ,I am releasing empty trays manually from STKC51 to keep the production going. Thank you very much! July 17, 2025 at 6:12 AM, MCS/RTD System : Good morning @Skwarek Tibor Please check this issue on priority it is stopping automatic empty trays delivery for cathode. Thank you! July 17, 2025 at 6:23 AM, 동현 : @김지수PM(Gyuri)_FA please check this, the LTC1265 from P02 could not be released so that it has been blocking others. July 17, 2025 at 6:26 AM, MCS/RTD System : Dear @김지수PM(Gyuri)_FA This is the issue which blocking empty trays delivery. Please check, it still exists since 5 AM. Thank you ! July 17, 2025 at 6:26 AM, Skwarek Tibor : Checking July 17, 2025 at 6:27 AM, 김지수PM(Gyuri)_FA : Our colleague is already taking action July 17, 2025 at 6:54 AM, Skwarek Tibor : LTC1265 had adress ending 48, we changed to 39. July 17, 2025 at 7:20 AM, Mohammad Amir : Dear @All, Update:- Now Whole CNVC51 is filled with Cathode empty trays so I am making the process back to normal ✅ Thank you very much! July 17, 2025 at 9:20 AM, 김대호 (Kim Dae Ho) : Anode press 2 u/w Please check the no 17 agv error July 17, 2025 at 9:21 AM, Skwarek Tibor : Checking July 17, 2025 at 9:46 AM, 김건희 : Is there anyone Cathode roll storage MC off July 17, 2025 at 9:46 AM, Viczai Tamás : Megyek July 17, 2025 at 9:47 AM, MCS/RTD System : @Skwarek Tibor Please check STKA52-P01-OP01 ,it is in Manual mode hence OOS and materials recovery has stopped. Please make it Auto. Thank you very much! July 17, 2025 at 9:53 AM, MCS/RTD System : @FA Please check this issue,it still exists and now there is a traffic of materials on the CNVA51. Thank you very much! July 17, 2025 at 9:53 AM, Skwarek Tibor : Checking July 17, 2025 at 9:54 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 9:57 AM, Skwarek Tibor : You re welcome July 17, 2025 at 10:21 AM, Oláh Rajmund : Gyertek legyszives anode press 1 July 17, 2025 at 10:21 AM, Oláh Rajmund : Koszonom July 17, 2025 at 10:21 AM, Skwarek Tibor : Megyünk July 17, 2025 at 11:39 AM, MCS/RTD System : @Skwarek Tibor Please check STKC34_C01 there is MCP safety ready off error and one job is getting delayed . Thank you! July 17, 2025 at 11:39 AM, Simon Attila F. A. : Im here. July 17, 2025 at 11:43 AM, Simon Attila F. A. : Done. July 17, 2025 at 11:43 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 1:08 PM, 임동현 : Cathode sliter 1,2 Please check the AGV July 17, 2025 at 1:18 PM, 임동현 : Cathode sliter 1,2 Please check the L/R July 17, 2025 at 1:20 PM, Sazzad Bhai SKon : E1SLC010, 020 LR not received July 17, 2025 at 1:23 PM, Sazzad Bhai SKon : Slitter 1, There was LR at 11.53 but that job was terminated by SCS. Please raise LR again July 17, 2025 at 1:25 PM, 임동현 : LR I applied again July 17, 2025 at 1:26 PM, 김건희 : Is there anyone who can take out the roll in the cathode roll storage5 02-006-02 shelf to manual port? The status is retrieve reserved so I cant take out July 17, 2025 at 1:27 PM, Sazzad Bhai SKon : Checking July 17, 2025 at 1:28 PM, Sazzad Bhai SKon : RBC0867 on the way July 17, 2025 at 1:32 PM, Sazzad Bhai SKon : @RBC0259 stuck at E0STKC35_P01_BP01, so other jobs delaying July 17, 2025 at 1:35 PM, Mohammad Amir : @Skwarek Tibor Good afternoon, Please confirm RBC1890 physically located at E0STKC35_P01 ? It is source cause of delay for all the jobs originated from STKC35. Thank you very much! July 17, 2025 at 1:36 PM, Skwarek Tibor : Checking July 17, 2025 at 1:37 PM, Skwarek Tibor : Yes July 17, 2025 at 1:38 PM, MCS/RTD System : Dear Sir Currently there is active job for both Slitter1 &2 ,however there issue from STKC35 that's why you are witnessing delay i am working to solve it. Thank you very much! July 17, 2025 at 1:46 PM, MCS/RTD System : Could you please maually trabfer the Roll RBC1890 to the warehouse, currently it has not task and it is blocking the way for Slitter cathode 1&2. Unfortunately job created from MCS is getting failed ,that's why I am requesting you to transfer manually. Thank you very much! July 17, 2025 at 1:47 PM, Skwarek Tibor : As far as i know, we cant send back to the warehouse with manual order. Last time when a roll stuck like that we sent an agv to take to another stacker. July 17, 2025 at 1:48 PM, MCS/RTD System : Yes Please transfer to other warehouse. Thank you very much! July 17, 2025 at 1:52 PM, Skwarek Tibor : Done July 17, 2025 at 1:53 PM, MCS/RTD System : Sir, As I checked for the Roll RBC1443 located at the mentioned place ,it already has a task to go to Cathode Press _3 ,it was not moving because of the Roll RBC1890 stuck at P01_STKC35. Now issue has been resolved and Roll will be on its way to Cathode Press _3. I am monitoring. Thank you very much! July 17, 2025 at 1:53 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 1:54 PM, Skwarek Tibor : You re welcome July 17, 2025 at 1:57 PM, Mohammad Amir : Dear @임동현 and @김건희 , Update :- Now issue has been resolved with STKC35 so now Roll on the way to process Machines. ✅ RBC1443 on the way to CA press-3. ✅ RBC0355 on the way to CA Slitter -2 ✅ RBC0867 on the way to CA Slitter -1 ✅. I am monitoring. Thank you very much! July 17, 2025 at 2:03 PM, Mohammad Amir : Update:- AGV#7 on the way to CA Slitter -2 and AGV#12 on the way to CA Slitter -1 ✅. Thank you very much! July 17, 2025 at 6:46 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (0): - Holiday (2): Kiss Balázs, Nagy Gábor Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Kasztel Balázs, Novák Zoltán, Kovács Szabika Modul(2): Zsurbej Zsolt, Martina Dávid July 17, 2025 at 6:55 PM, Horváth Attila : Sziasztok. Segítséget kérnénk Anod 1 coating 2R/W July 17, 2025 at 6:56 PM, Horváth Attila : Le fulladt az AGV July 17, 2025 at 6:58 PM, Szabadi Miki : Megyek July 17, 2025 at 6:58 PM, Koska Szilárd János : sziasztok gyertek légyszives katód slitt 3 hoz July 17, 2025 at 6:58 PM, Koska Szilárd János : köszi July 17, 2025 at 6:58 PM, Szabadi Miki : Az már folyamatban van July 17, 2025 at 7:02 PM, 김지수PM(Gyuri)_FA : @fa Please check E0cnva51 > empty trays are not moving over 90mins July 17, 2025 at 7:04 PM, Yena Valerii : Hello, pls check what happened on AN PRESS 7 with AGV R/W July 17, 2025 at 7:05 PM, MCS/RTD System : LTA0668 at E0CNVA51_06044 not moving, please check July 17, 2025 at 7:07 PM, 김지수PM(Gyuri)_FA : Just changed the destination of full reel(0668) I don't know why it was stayed at that port July 17, 2025 at 7:08 PM, 김지수PM(Gyuri)_FA : As I checked someone created an order for LTA0668 July 17, 2025 at 7:08 PM, Shakir (MCS) : Yes, Now it is moving ✅ July 17, 2025 at 7:14 PM, ~Lidiia~리디 ~ : Hello, There is a conveyor problem on slitt 3 cathode. Please check this. Thank you. @FA July 17, 2025 at 7:14 PM, Szabadi Miki : This tray is empty July 17, 2025 at 7:40 PM, Shakir (MCS) : At 17:11, the carrier LTA0668 was rack-out from STKA52 as an empty reel tray. However, upon arrival at E0CNVA51_P06, the system incorrectly read the tray type as Full instead of Empty. As a result, at 17:24, CCS terminated the job with Result Code 8:Validation checkNG. Since the tray type was expected to be Empty, the mismatch led to job termination and caused the carrier to remain at the port for an extended time. @CCS please check why this carrier reported as full at E0CNVA51_P06 Thank you July 17, 2025 at 7:43 PM, Oláh András : @Szabadi Miki checked this tray. The tray was in reverse position thats why changed to full in ccs. July 17, 2025 at 7:44 PM, Shakir (MCS) : Thank you checking ✅ July 17, 2025 at 7:47 PM, MCS/RTD System : @FA Please check E0STKC31, Load collapse error. Thank you July 17, 2025 at 7:47 PM, Oláh András : Checking July 17, 2025 at 8:14 PM, Oláh András : @Somoskövy Martin mártyííín ide tudnál jönni kat slitt1hez? Uw turret megint kotlik July 17, 2025 at 8:15 PM, Koska Szilárd János : @Majláth Martin July 17, 2025 at 8:16 PM, Oláh András : Már itt vannak a technikusok July 17, 2025 at 8:17 PM, Oláh András : Ők kellenek ehhez July 17, 2025 at 9:03 PM, Yena Valerii : pls check what happened on AN PRESS 7 with AGV R/W July 17, 2025 at 9:07 PM, MCS/RTD System : Now carrier unload from R/W AGV 08 on the way to warehouse Thank you July 17, 2025 at 9:26 PM, 장정훈 : @MCS Anod slitter c/v reel tray export is getting late please check! And please return the empty tray first. Thank you! July 17, 2025 at 9:26 PM, Erik Gerzsenyi : Anod slitt 1 elakadt az AGV July 17, 2025 at 9:26 PM, Oláh András : Megyek July 17, 2025 at 9:27 PM, MCS/RTD System : Sure, working on it July 17, 2025 at 9:30 PM, MCS/RTD System : @Dániel Hufnágel Could you please redirect full trays to STKA51 currently there are many full trays on CNV. Thank you July 17, 2025 at 9:34 PM, Oláh András : I will👍🏻 July 17, 2025 at 9:36 PM, MCS/RTD System : Thank you, now full trays recovery become faster. July 17, 2025 at 9:40 PM, Oláh András : @MCS/RTD System did you give 90 prio to empty trays? July 17, 2025 at 9:41 PM, MCS/RTD System : Just increase priority for some empty trays from MCS only. July 17, 2025 at 9:41 PM, MCS/RTD System : I see someone increased from SCS July 17, 2025 at 9:42 PM, Oláh András : Ok, we just checked the orders 👍🏻 thank you July 18, 2025 at 12:56 AM July 18, 2025 at 12:56 AM, ~Lidiia~리디 ~ : There is almost no tray on the anode side? July 18, 2025 at 12:56 AM, MCS/RTD System : Working on it July 18, 2025 at 1:13 AM, Yena Valerii : again, pls check July 18, 2025 at 1:16 AM, MCS/RTD System : @FA Please check AGV01 Alarm, Press7 AN Thank you July 18, 2025 at 1:21 AM, MCS/RTD System : Now AGV unload material from Press7 AN Thank you July 18, 2025 at 1:44 AM, ~Lidiia~리디 ~ : Cathode sliit 4, transfer problem, please check it. Thanks. @FA July 18, 2025 at 1:44 AM, Oláh András : 🥲 July 18, 2025 at 2:21 AM, ~Lidiia~리디 ~ : Cathode slitt 1 has problem U/W transfer AGV. Please check this. Thank you. @FA July 18, 2025 at 2:23 AM, Novák Károly F. A. : Uw turret😢 July 18, 2025 at 2:24 AM, ~Lidiia~리디 ~ : Yes July 18, 2025 at 2:27 AM, Novák Károly F. A. : Karbantartót kérnénk ca slitt 1 turrethez. July 18, 2025 at 2:30 AM, ~Lidiia~리디 ~ : I informed the maintenance staff. July 18, 2025 at 2:50 AM, MCS/RTD System : Now, anode empty reel trays delivery normalize and enough trays on Conveyor. Thank you July 18, 2025 at 2:53 AM, ~Lidiia~리디 ~ : Yes, thank you so much July 18, 2025 at 2:53 AM, MCS/RTD System : You're welcome July 18, 2025 at 2:59 AM, Horváth Attila : Anod 1 coatingon lerobbant az AGV. Gyertek légyszí July 18, 2025 at 3:08 AM, Horváth Attila : Anod jumbo raktárhoz gyertek elakadt 2 AGV July 18, 2025 at 3:10 AM, Szabadi Miki : Megyünk July 18, 2025 at 3:17 AM, Horváth Attila : Köszi July 18, 2025 at 3:41 AM, Koska Szilárd János : sziasztok gyertek légyszives katód slitt 4 hez megált a robot ami felrakja a jumbot July 18, 2025 at 3:48 AM, ~Lidiia~리디 ~ : @FA Anode slitt unit 2 has transfer conveyor problem. Please check this. Thank you July 18, 2025 at 3:50 AM, ~Lidiia~리디 ~ : Cathode slitt 4 U/W B, AGV transfer has a problem. Please check this, too. Thank you July 18, 2025 at 4:00 AM, Erik Gerzsenyi : Katod reelraktarhoz kernek segitseget M10-es porthoz July 18, 2025 at 4:00 AM, Erik Gerzsenyi : Koszonom July 18, 2025 at 4:00 AM, Oláh András : Jelezzük az assysoonak July 18, 2025 at 4:16 AM, Hári Zoltàn : Gyertek legyszi a katod roll raktarhoz! Köszönöm! July 18, 2025 at 4:16 AM, Oláh András : Megyünk 🏃 July 18, 2025 at 4:17 AM, Hári Zoltàn : Szagelemzés lesz :D Készüljetek July 18, 2025 at 4:30 AM, Hári Zoltàn : Sziasztok! Katód raktár 3-as daru villamosszekrényéből (E0STKC33-STK-SCP) égett szagot érzünk. Itt vannak a techmikusok és viszgáljuk a probléma forrását. @Dániel Hufnágel légyszi ha nem derül ki mi okozza, add tovább, nehogy baj legyen belőle! Köszönöm! July 18, 2025 at 4:31 AM, Dániel Hufnágel : Okés köszönjük hogy jeleztétek! July 18, 2025 at 5:12 AM, Farkas Dániel Elekt : Sziasztok megvan a szag forrasa July 18, 2025 at 5:13 AM, Farkas Dániel Elekt : Az egyik rele a hibas July 18, 2025 at 5:13 AM, Oláh András : Ventillatoré? July 18, 2025 at 5:13 AM, Farkas Dániel Elekt : Ez mutatott 89 fokos homersekletet July 18, 2025 at 5:13 AM, Farkas Dániel Elekt : Gyertek vissza es megmutatom July 18, 2025 at 5:21 AM, Dániel Hufnágel : @MCS/RTD System please put Oos Chatode 33 roll storage ! July 18, 2025 at 5:21 AM, MCS/RTD System : Working on it July 18, 2025 at 5:22 AM, Dániel Hufnágel : It wont operate, one relay burned down it wont operate for a while! July 18, 2025 at 5:25 AM, MCS/RTD System : E0STKC33 already OOS in MCS Thank you July 18, 2025 at 5:26 AM, Dániel Hufnágel : Thank you do much! July 18, 2025 at 5:35 AM, Dániel Hufnágel : @All Katód Roll raktár 33 műszaki hiba miatt egy darabig nem fog üzemelni! July 18, 2025 at 6:08 AM, Mohammad Amir : Good morning @All, For your kind information:- Currently we don't have enough Rolls available in warehouse and because of this AGVs are not bringing Rolls to following process machines:- CA Slitter -3 ✅ Thank you very much! July 18, 2025 at 6:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Csepi Árpád ———————————— July 18, 2025 at 8:10 AM, MCS/RTD System : @FA Please check CNVC51_08_077/78 there is Run time error. Thank you! July 18, 2025 at 8:24 AM, Mohammad Amir : Dear @Mr.Miti (미티) FA Please check this error still exists since 8:08 and it is blocking empty trays delivery. Thank you very much! July 18, 2025 at 8:24 AM, Mr.Miti (미티) FA : Checking July 18, 2025 at 8:24 AM, MCS/RTD System : Thank you very much! July 18, 2025 at 8:31 AM, Mr.Miti (미티) FA : Solved July 18, 2025 at 9:29 AM, 이광교 Lee Gwang Gyo : This message was deleted. July 18, 2025 at 9:31 AM, 이광교 Lee Gwang Gyo : Please check the cathode roll warehouse agv July 18, 2025 at 9:37 AM, adambenczik : Solved July 18, 2025 at 10:25 AM, Karina Lyzanets : Sziasztok! Slitt Cathode 1 no Lot ID on A side Köszönöm szépen July 18, 2025 at 10:25 AM, Karina Lyzanets : Tálca szám July 18, 2025 at 10:25 AM, Karina Lyzanets : Bocsánat July 18, 2025 at 10:28 AM, adambenczik : Nézem July 18, 2025 at 10:35 AM, Karina Lyzanets : Gyere vissza légyszíves July 18, 2025 at 10:35 AM, Karina Lyzanets : @adambenczik July 18, 2025 at 10:54 AM, Karina Lyzanets : Slitter Cathode 1 Ez a probléma még mindig nincs megoldva July 18, 2025 at 10:55 AM, adambenczik : Rajta vagyunk July 18, 2025 at 11:05 AM, cehmannzsoltcehmann : Kész van July 18, 2025 at 11:56 AM, MCS/RTD System : @FA Please check E0CNVC51_08_014/15 there is INV-01 Run Time over error and it is blocking materials recovery. Thank you very much! July 18, 2025 at 11:58 AM, Karina Lyzanets : Sziasztok! Cathode oldalon a conveyor megállt Köszönöm July 18, 2025 at 12:00 PM, MCS/RTD System : @gutenkunstabelzoltan Please check this issue there is a traffic of materials. Thank you! July 18, 2025 at 12:02 PM, gutenkunstabelzoltan : Kesz July 18, 2025 at 12:05 PM, 정대현 : @FA 음극 1라인 2nd R/W 이재기 오류로 확인 부탁드립니다 July 18, 2025 at 12:06 PM, 정대현 : Coating July 18, 2025 at 12:07 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA FA electrode technicians check please July 18, 2025 at 12:08 PM, KIM SEYEON [김세연]_FA : @adambenczik @gutenkunstabelzoltan July 18, 2025 at 12:08 PM, Mr.Miti (미티) FA : they go. they always go! July 18, 2025 at 12:08 PM, KIM SEYEON [김세연]_FA : thanks July 18, 2025 at 12:25 PM, 오승주 : The AGV of the rewinder 1st line 1 of the cathode has stopped. Please check it July 18, 2025 at 12:25 PM, 오승주 : Coating July 18, 2025 at 12:36 PM, 오승주 : 지금 현지 FA 작업자가 조치 중인데 조치가 안되고 있습니다 대응해주실 한국인 작업자분 있을까요 July 18, 2025 at 12:40 PM, adambenczik : Nem kell, megoldottuk 😊 July 18, 2025 at 12:40 PM, gutenkunstabelzoltan : Anode 5 os rakiben dataoff senzor hiba van nincs kogosultsagom a felhasznalommal h bekuldjem az anyagot! July 18, 2025 at 12:42 PM, Mr.Miti (미티) FA : @Vörös Geri @Szeitz Flórián Nézzetek meg légyszíves hogy milyen anyag van a manual porton. Kifelé vagy befelé menne. July 18, 2025 at 12:45 PM, Mohammad Amir : Dear @Mr.Miti (미티) FA For your information:- Currently RBA5523 located at STKA35_M01 ,i checked they tried to Rackin but due to MES error "Lot in operation can't warehouse" Rackin was unsuccessful. I hope it helps. Thank you very much! July 18, 2025 at 12:50 PM, MCS/RTD System : @FA @adambenczik Please check E0CNVC51_08216 there is manyfacture left _Roll detect sensor abnormal error. Thank you very much! July 18, 2025 at 1:43 PM, Karina Lyzanets : Sziasztok! Slitt Cathode 4 re gyertek légyszíves Teansfer probléma R/W July 18, 2025 at 1:44 PM, Karina Lyzanets : Az B oldalon July 18, 2025 at 1:48 PM, adambenczik : Kész July 18, 2025 at 2:22 PM, Sárvári Márk : Segítséget kérnénk Anod 1 sorra, robot probléma miatt. July 18, 2025 at 2:29 PM, adambenczik : Kész July 18, 2025 at 2:36 PM, MCS/RTD System : @adambenczik Please check STKC33_C01 there is MCP mode error. Thank you! July 18, 2025 at 2:43 PM, MCS/RTD System : @adambenczik @gutenkunstabelzoltan Please chcek this error still exists since 14:29 pm. Thank you! July 18, 2025 at 2:54 PM, 주범진 : 안녕하세요 포일창고 창고 작업 중인데 5001, 245 에러 발생했는데 조치 부탁드립니다 July 18, 2025 at 3:02 PM, adambenczik : Photo July 18, 2025 at 3:04 PM, adambenczik : STKC33 does not work July 18, 2025 at 3:05 PM, 정대현 : @FA Coating 음극1라인 이재기 오류로 확인 부탁드립니다 July 18, 2025 at 3:07 PM, Mohammad Amir : Hello, E0STKC33_C01:- After 5:02 since it was Out of service but it came back to service on 11:41 and afterwards it performed tasks for RBC1916,RBC0224,RBC0265,RBC1921. And it was in service till 14:19. Now it is OOS again , that's why I asked for error check. So STKC33 will be again OOS ? Thank you very much! July 18, 2025 at 3:09 PM, Mohammad Amir : Should we exclude STKC33 from monitoring again? Thank you very much! July 18, 2025 at 3:14 PM, Kurgya Attila : Sziasztok Anod oldalon az egyik agv folyamatosan kiáll hibára a töltőnél. Nézzetek rá légyszíves. Köszönöm July 18, 2025 at 3:15 PM, Kurgya Attila : Bocs, Coating-on July 18, 2025 at 3:16 PM, adambenczik : There is a device replacement going on right now, please wait untill we get further information about the project, thank you July 18, 2025 at 3:16 PM, gutenkunstabelzoltan : Kesz July 18, 2025 at 3:17 PM, Mohammad Amir : Thank you very much for the confirmation! July 18, 2025 at 3:21 PM, 김건희 : Could you check the RBC0369 statues? July 18, 2025 at 3:24 PM, MCS/RTD System : Sir This carrier has task to go to the manual port M02 of CA Roll STK_4. It will move slowly, we are monitoring. Thank you! July 18, 2025 at 3:31 PM, Mohammad Amir : Update:- Last task was cancelled by the Operator and and new task was created to Rackout this Roll manually to GF Manual port (M01_E0STKC34) . So currently Roll RBC0369 arrived at GF Manual port (M01) successfully ✅. Thank you very much! July 18, 2025 at 3:54 PM, Vörös Geri : Katód Roll raktárba a 4 es AGV kiált hibára.megnéz étek.köszi July 18, 2025 at 4:16 PM, Mr.Miti (미티) FA : Geriiii July 18, 2025 at 4:17 PM, Mr.Miti (미티) FA : Elfelejtetted vissza indítani a raktárat July 18, 2025 at 4:17 PM, Vörös Geri : Uhh bocs July 18, 2025 at 4:17 PM, Vörös Geri : Nagyon siettem July 18, 2025 at 4:18 PM, Mr.Miti (미티) FA : Semmi baj. A termelés meg áll 🤣🤣 July 18, 2025 at 5:02 PM, Karina Lyzanets : Slitt Cathode 2 mögött megállt a conveyor July 18, 2025 at 5:02 PM, Karina Lyzanets : Tálca nem jó pozicióban van July 18, 2025 at 5:02 PM, Karina Lyzanets : Köszönöm szépen July 18, 2025 at 5:12 PM, cehmannzsoltcehmann : Készen van July 18, 2025 at 6:23 PM, Csanálosi Gábor FA : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.18. 11 Tech,+1 overtime 0SL Overtime(1): Szabadi Miklós Holiday(2): Szücs Géza Imre, Takács Ádám Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (2): Böröczki Balázs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert, --------------- Form/Modul(3): Boromisza Zolt July 18, 2025 at 6:49 PM, Dana Honak : Cathode slitt4 r/w robot problema . July 18, 2025 at 6:55 PM, 김진현 KIM JIN HYEON : @FA cathode press 1 AGV retry error check please July 18, 2025 at 6:58 PM, Nagy Dávid 4 : Anod press 1 R/W AGV nem veszi el az anyagot help help help köszönöm szépen July 18, 2025 at 7:13 PM, Szarka Adrián : Sziasztok katod földszint Nc segítség kéne elakadt a reel talca. Mindig ott akad el a talca most mondjak a srácok. Legyszi segítsetek July 18, 2025 at 7:13 PM, Szarka Adrián : Köszi July 18, 2025 at 7:15 PM, Böröczki Balázs : Megyek. July 18, 2025 at 7:15 PM, Rácz Dániel / FA : @Szarka Adrián ca slitt 4 ugyan az volt a gond. Koreai kollégával kifújattuk, tele volt műanyag darabokkal. July 18, 2025 at 7:15 PM, Szarka Adrián : Szuper vagy köszi July 18, 2025 at 7:15 PM, Rácz Dániel / FA : Megvárom mégegyet July 18, 2025 at 7:17 PM, Rácz Dániel / FA : Mindjárt megyek July 18, 2025 at 10:37 PM, Nagy Dávid 4 : Anod roll raktárban agv kiált hibára help help köszönöm szépen July 18, 2025 at 11:03 PM, Szarka Adrián : Katod oldalon a 12 számú agv áll ( nincs error ) de a piros lámpa világít körülötte. Ez normális ? July 18, 2025 at 11:04 PM, Szabadi Miki : Nézzük July 18, 2025 at 11:05 PM, Szabadi Miki : Már megy is July 18, 2025 at 11:07 PM, Nagy Dávid 4 : Cathode slitt 1 2ND R/W tray ID error 😭help help köszönöm szépen July 18, 2025 at 11:07 PM, Szabadi Miki : Megyünk July 18, 2025 at 11:25 PM, Csanálosi Gábor FA : Kész July 19, 2025 at 12:51 AM July 19, 2025 at 12:51 AM, Nagy Dávid 4 : Anod slit 1 problem robot R/W help help köszönöm szépen July 19, 2025 at 12:51 AM, Nagy Dávid 4 : Megoldotam köszi July 19, 2025 at 1:03 AM, Nagy Dávid 4 : Majdnem ütközés anod oldalon press 1 mögötte7 -17 számú agv help help köszönöm szépen July 19, 2025 at 1:04 AM, Czeilinger Krisztián : Going. July 19, 2025 at 1:22 AM, Viktoriia Hleba : Press 7 anode nincs Agv. Please check July 19, 2025 at 1:23 AM, MCS/RTD System : AGV 17 is on the way July 19, 2025 at 4:54 AM, Dana Honak : Cathode slitt4 r/w robot problema . July 19, 2025 at 4:56 AM, Csanálosi Gábor FA : Kész July 19, 2025 at 5:07 AM, Nagy Dávid 4 : Anod press 1 robot megalt menet közben help help köszönöm szépen July 19, 2025 at 5:10 AM, Csanálosi Gábor FA : Kész July 19, 2025 at 6:13 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2+1): Brázik János Csepi Árpád ———————————— July 19, 2025 at 6:30 AM, 김대호 (Kim Dae Ho) : Cathode sliter 4 Did you change the speed of U/w transpers? It’s very slow @Fa July 19, 2025 at 6:36 AM, 김대호 (Kim Dae Ho) : Give me an answer or check it @Mr.Miti (미티) FA July 19, 2025 at 6:39 AM, Mr.Miti (미티) FA : Sorry for the late reply. I didn't change the speed. July 19, 2025 at 6:42 AM, 김대호 (Kim Dae Ho) : The worker came to check Thank you July 19, 2025 at 6:43 AM, Mr.Miti (미티) FA : Yeah I know. Thank you to! July 19, 2025 at 6:48 AM, gutenkunstabelzoltan : Fixed it July 19, 2025 at 6:53 AM, 김대호 (Kim Dae Ho) : Thank you July 19, 2025 at 7:05 AM, 김대호 (Kim Dae Ho) : Cathode sliter4 u/w Error check please July 19, 2025 at 7:44 AM, Karina Lyzanets : Sziasztok Cathode oldalon nem jönnek a tálcák July 19, 2025 at 7:44 AM, Karina Lyzanets : Köszönöm szépen July 19, 2025 at 7:48 AM, MCS/RTD System : @FA Please check LTC1856, it is not moving from E0STKC52_P02_OP01. Thank you July 19, 2025 at 7:53 AM, gutenkunstabelzoltan : I dont know why isnt it moveing July 19, 2025 at 7:56 AM, Alesya 알레시아 : Sziasztok Cathode oldalon nem jönnek a tálcák July 19, 2025 at 8:01 AM, MCS/RTD System : No report received when it moved to from P02_OP01 to P02 so in MCS it is still showing at P02_OP01 July 19, 2025 at 8:02 AM, Mr.Miti (미티) FA : Raktár kiadó porton érzékel egy tálcát ami nem megy tovább. Már ha ott van. Nézzetek meg légyszíves July 19, 2025 at 8:10 AM, gutenkunstabelzoltan : I cant find a problem here… July 19, 2025 at 8:10 AM, gutenkunstabelzoltan : And i dont have wifi near that cv….. July 19, 2025 at 8:12 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the location of LTC1856? July 19, 2025 at 8:12 AM, gutenkunstabelzoltan : Yes that is there July 19, 2025 at 8:13 AM, gutenkunstabelzoltan : I moved it back and forth but it didnt helped July 19, 2025 at 8:13 AM, Shahbaz 샤바즈 MCS/RTD : At P02 or OP port? July 19, 2025 at 8:14 AM, gutenkunstabelzoltan : Assy there is and open sex door at the crane July 19, 2025 at 8:14 AM, gutenkunstabelzoltan : Sec July 19, 2025 at 8:17 AM, gutenkunstabelzoltan : Its here yes where the put it July 19, 2025 at 8:20 AM, MCS/RTD System : Same issue on STKC51 side, the location change report was not received for LTC0910 and port P04 went OOS at that time so the tray is showing on OP port in MCS/RTD. July 19, 2025 at 8:24 AM, MCS/RTD System : @FA Please check E0STKA32 " Hoist exact position error after forking" Thank you July 19, 2025 at 8:31 AM, cehmannzsoltcehmann : Done July 19, 2025 at 8:36 AM, Karina Lyzanets : Nincsenek tálcák már 50 perc July 19, 2025 at 8:36 AM, Karina Lyzanets : Cathode July 19, 2025 at 8:37 AM, Mr.Miti (미티) FA : Pillanat és megindulnak July 19, 2025 at 8:37 AM, Karina Lyzanets : Oké July 19, 2025 at 8:50 AM, Mr.Miti (미티) FA : A tálcák úton vannak July 19, 2025 at 8:59 AM, Karina Lyzanets : Szuper, köszönjük szépen July 19, 2025 at 9:02 AM, Mr.Miti (미티) FA : Elnézést a várakozás ért July 19, 2025 at 11:46 AM, 김대호 (Kim Dae Ho) : Cathode sliter 3 Please check if there are any materials to come in @Shahbaz 샤바즈 MCS/RTD July 19, 2025 at 11:47 AM, Mr.Miti (미티) FA : No material July 19, 2025 at 11:48 AM, 김대호 (Kim Dae Ho) : Okay ! Thank you ! July 19, 2025 at 11:49 AM, Mr.Miti (미티) FA : You’re welcome! July 19, 2025 at 12:57 PM, Powder tréner : Sziasztok, anód Por raktár nem adja ki az anyagot E1lPLA011_P02 Portra.Nézétek rá.Köszönöm. July 19, 2025 at 12:57 PM, Mr.Miti (미티) FA : Nézem July 19, 2025 at 12:59 PM, Karina Lyzanets : Slitt Cathode 4 mögött a conveyor megállt July 19, 2025 at 12:59 PM, Karina Lyzanets : Köszönöm July 19, 2025 at 1:02 PM, Mr.Miti (미티) FA : Úton van a 3-as raktarbol az anyag July 19, 2025 at 1:08 PM, gutenkunstabelzoltan : Kesz July 19, 2025 at 1:10 PM, Karina Lyzanets : Köszi July 19, 2025 at 1:11 PM, Karina Lyzanets : Slitt Cathode 4 no AGV robot 20 min July 19, 2025 at 1:12 PM, gutenkunstabelzoltan : Its on the way July 19, 2025 at 2:29 PM, Anastasiia~~ : conveyor stopped on anode side please check July 19, 2025 at 2:36 PM, Karina Lyzanets : Slitt Cathode 4 no AGV robot 40 min July 19, 2025 at 2:37 PM, MCS/RTD System : No material available July 19, 2025 at 2:39 PM, Karina Lyzanets : Thank you! July 19, 2025 at 3:05 PM, Karina Lyzanets : Slitt Cathode 1 mögött a conveyor megállt July 19, 2025 at 3:05 PM, Karina Lyzanets : Köszi July 19, 2025 at 3:06 PM, gutenkunstabelzoltan : Kesz July 19, 2025 at 3:14 PM, Anastasiia~~ : problem with robot on press 1 U/W July 19, 2025 at 3:16 PM, Anastasiia~~ : Anode July 19, 2025 at 3:17 PM, cehmannzsoltcehmann : Solved July 19, 2025 at 3:30 PM, Anastasiia~~ : conveyor stopped on anode side please check July 19, 2025 at 3:34 PM, cehmannzsoltcehmann : Solved July 19, 2025 at 3:42 PM, Anastasiia~~ : Nagyon szépen köszönöm July 19, 2025 at 4:40 PM, MCS/RTD System : @FA There is a pending job for TEST2505 from coater to Roll stocker for a long time. Please confirm. Thank you July 19, 2025 at 4:46 PM, 김대호 (Kim Dae Ho) : RBC0840 RBC0837 Can you check why Roll is not coming to the facility? @MCS/RTD System July 19, 2025 at 4:51 PM, MCS/RTD System : These rolls (RBC0840 and RBC0837) are already at the Slitting U\W port. Could you please clarify what exactly you would like to confirm? July 19, 2025 at 4:56 PM, 김대호 (Kim Dae Ho) : Mes in the warehouse, so I asked you to check it. Thank you for your response July 19, 2025 at 6:26 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.07.19. "B" műszak, 10Tech, 1OP, 1Sup, 1SL Overtime(0): Holiday(2): Takács Ádám, Gombos Norbert(OP) Sick(1): Gerbovits Kevin Shift Change(0): Translater: --------------- Electrode(4): Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, Böröczki Balázs NC Op: Nagy Sándor --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Formation/Modul(2): Denkó János, Boromissza Zoltán ------------ July 19, 2025 at 6:53 PM, MCS/RTD System : @FA Please check Anode roll STK A34 auto port is out of service.

Chunk 480:
March 14, 2025 at 11:05 AM, Sazzad Bhai SKon invited duzzaman Md (MCS).
March 14, 2025 at 11:11 AM, 배병민 (Bae Byoungmin): 팀장님 박스포장기 투입단 HMI에서 AGV 모드로 변경부탁드립니다
March 14, 2025 at 11:11 AM, FACS_JaewonShin: 네
March 14, 2025 at 11:15 AM, FACS_JaewonShin: 환경 - 모델설정 - 옵션 - input AGV사용 활성화 했습니다.
March 14, 2025 at 11:18 AM, 배병민 (Bae Byoungmin): 스펀지 Top cover 2개구간에 Bypass 되어있는 부분도 사용으로 변경 부탁드립니다.
March 14, 2025 at 11:19 AM, 배병민 (Bae Byoungmin): 9,10라인 박스포장기 생산은 조립공정 Bypass 없이 자재 정상 사용으로 진행하겠습니다

Chunk 481:
March 14, 2025 at 11:19 AM, 배병민 (Bae Byoungmin): @원승연(Seungyeon Won)
March 14, 2025 at 11:21 AM, 배병민 (Bae Byoungmin): @FACS_JaewonShin
March 14, 2025 at 11:22 AM, FACS_JaewonShin: 확인하겠습니다
March 14, 2025 at 11:23 AM, 원승연(Seungyeon Won): 오후 2시부터 EOL 시작 계획입니다. 팔레트 배출 되려면 3시경으로 예상됩니다.
March 14, 2025 at 11:23 AM, FACS_JaewonShin: 3시에 패킹기로 인원 보내겠습니다.
March 14, 2025 at 11:27 AM, FACS_JaewonShin: Op3 sponge사용 Op4 topcover 사용 으로 변경하였습니다

Chunk 482:
March 14, 2025 at 1:28 PM, 유경호(RYU KYEONGHO): @배병민 (Bae Byoungmin) @SKOH2/제조-셀,모듈 출하/김병호 안녕하세요. 배병민PM님. 박스패킹 배출부 AGV는 사용 비활성화 부탁드립니다. 완제품 창고 입고 안하기로 했습니다.
March 14, 2025 at 1:32 PM, FACS_JaewonShin: 현장 가서 조치 하겠습니다.
March 14, 2025 at 1:38 PM, FACS_JaewonShin: 패킹기 배출부 비활성화 완료되었습니다.
March 14, 2025 at 1:43 PM, 원승연(Seungyeon Won): 버퍼창고 팔레트가 9,10라인 EOL 투입부로 안들어옵니다. 확인 부탁드립니다

Chunk 483:
March 14, 2025 at 1:44 PM, FA/CS/AGV/Taimur: @ACS can you please check AGV:16 is not moving to Destination in EOL line. The carrier has been loaded on it already.
March 14, 2025 at 1:46 PM, FA/CS/AGV/Taimur: @ACS please open the EOL line Route links for 10/09 line. So AGV can initiate the Transfer.
March 14, 2025 at 2:05 PM, FACS_JaewonShin: @MCS @ACS Please open node for Eol9 Eol10
March 14, 2025 at 2:05 PM, Mohammad Amir: Checking

Chunk 484:
March 14, 2025 at 2:07 PM, Mohammad Amir: From MCS side it is open and already there is two job exists . One for EOL9 P01 with Z053898 AGV #16 on the way. For EOL 10 P01 carrier Z053899 on the way. I am checking further. Thank you very much!
March 14, 2025 at 2:08 PM, FA/CS/AGV/Taimur: Yes, Job already exist. If you have ACS access you can open the Links for these destinations.
March 14, 2025 at 2:10 PM, FACS_JaewonShin: Node 1608 1658 1607 1657 1606 1656 1605 1655

Chunk 485:
March 14, 2025 at 2:11 PM, Mohammad Amir: @ACS Please look into this matter. From MCS everything is fine . ✅ Job are not progressing. Thank you very much!
March 14, 2025 at 2:18 PM, FACS_JaewonShin: @FA AGV That port has been opened Please check docking position
March 14, 2025 at 2:19 PM, FACS_JaewonShin: 해당포트 open 되었습니다 AGV담당자가 현장에서 추가 확인 예정입니다.

Chunk 486:
March 14, 2025 at 2:20 PM, Mohammad Amir: Carrier Z053898 has already reached EOL 10 P01 . And carrier Z053899 is on the way to EOL 09 _P01 with AGV #13. Thank you very much!
March 14, 2025 at 2:27 PM, 원승연(Seungyeon Won): 확인감사합니다
March 14, 2025 at 4:07 PM, 배병민 (Bae Byoungmin): @Mohammad Amir The Pallet Job in Cell Buffer Warehouse 2 is not being created. Please check. Pallet ID : Z053903
March 14, 2025 at 4:07 PM, Mohammad Amir: Checking,Sir!

Chunk 487:
March 14, 2025 at 4:09 PM, Mohammad Amir: Job has created successfully ✅ Carrier is moving with destination F0BPM011_P02. Monitoring the transfer,Sir. Thank you very much!
March 14, 2025 at 4:10 PM, Mohammad Amir: Update:- AGV #7 has been assigned. Thank you very much!
March 14, 2025 at 4:11 PM, 배병민 (Bae Byoungmin): Ok, Thank you
March 14, 2025 at 4:11 PM, Mohammad Amir: You are welcome Sir!

Chunk 488:
March 14, 2025 at 6:19 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 489:
March 14, 2025 at 6:45 PM, Tklcz Alexandra SL/A: Hi! We need help with boxpacking.
March 14, 2025 at 6:52 PM, Csepi Árpád: It has been resolved!
March 14, 2025 at 9:45 PM, Tklcz Alexandra SL/A: Sziasztok! EOL5 nem jött paletta. Nézzetek rá kérlek.
March 14, 2025 at 9:45 PM, FA-CS-AGV-Masoud: Coming
March 14, 2025 at 9:47 PM, VK (mcs): Carrier is on the way

Chunk 490:
March 15, 2025 at 6:42 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 0Sl Overtime(2): Kertész Kornél Dániel, Szabadi Miklós Holiday(1): Radics András Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Szabadi Miklós --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Takarítás(2): Kertész kornél Dániel, Pálo

Chunk 491:
March 15, 2025 at 5:57 PM, Tklcz Alexandra SL/A: Sziasztok! EOL AGV 7 hibán áll az L5 előtt. Kérlek nézzetek rá.
March 15, 2025 at 6:00 PM, FA-CS-AGV-Masoud: Coming

Chunk 492:
March 15, 2025 at 6:06 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 1 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 493:
March 15, 2025 at 8:50 PM, Magosi Erik: Good evening! We have a load request a while ago on M3MFA300-P28 and the material still not arrived. Is there anything going on? @VK (mcs)
March 15, 2025 at 8:51 PM, FA-CS-AGV-Masoud: @Shahbaz 샤바즈 MCS/RTD could you please check it ??
March 15, 2025 at 8:54 PM, Shahbaz 샤바즈 MCS/RTD: @FA 2F, the unit M0CNV023_83_004 is OOS. Please check.
March 15, 2025 at 9:09 PM, Brázik János: Solved

Chunk 494:
March 15, 2025 at 9:13 PM, Magosi Erik: I see carrier is on the way. Thank You everyone
March 15, 2025 at 9:17 PM, Avacz Beáta: Sziasztok! Line 4 sorra sem hoz az AGV anyagog illetve nem továbbítja a külső portokb az anyagokat. Megnéznétek? Köszi
March 15, 2025 at 9:21 PM, FA-CS-AGV-Masoud: @Shahbaz 샤바즈 MCS/RTD is there any jobs for the AGV in line 4 because the Material is ready but the AGV didn’t came to load the material
March 15, 2025 at 9:21 PM, Shahbaz 샤바즈 MCS/RTD: Checking

Chunk 495:
March 15, 2025 at 9:23 PM, Shahbaz 샤바즈 MCS/RTD: The is a job for AGV#03 from CNV023_P31
March 15, 2025 at 9:32 PM, 요셉: EOL 5L앞 agv#7 리미트 센서 알람으로 정지중입니다 메뉴얼로도 진행 불가능 상태입니다 확인 부탁드립니다 @김지수PM(Gyuri)_FA @방혁 PM(Bang.Hyuk) FA
March 15, 2025 at 9:44 PM, Brázik János: Solved
March 15, 2025 at 9:44 PM, Brázik János: Solved
March 16, 2025 at 12:05 AM, Tklcz Alexandra SL/A: Hi! Something is wrong with the position of AGV 18. Please help.
March 16, 2025 at 12:05 AM, Tklcz Alexandra SL/A: EOL

Chunk 496:
March 16, 2025 at 12:12 AM, Csepi Árpád: @Shahbaz 샤바즈 MCS/RTD Hello! There is a task that is stuck. Please help! M0STK012 _P09 ID: T702853
March 16, 2025 at 12:14 AM, FA-CS-AGV-Masoud: Solved
March 16, 2025 at 12:17 AM, Shahbaz 샤바즈 MCS/RTD: There is already transfer command from P09 to P05 in SCS.
March 16, 2025 at 12:19 AM, Csepi Árpád: Thank you very much!

Chunk 497:
March 16, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9+2/12 Tech, 0Sl Overtime(2): Nagy Zsolt, Zsurbej Zsolt Holiday(2): Radics András, Boromisza Zoltán Sick(1): Czeilinger Krisztián --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (4): Böröczki Balázs, Takács Ádám, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Takarítás(2): Nagy Zsolt, Zsurbej Zsolt A technikusok elosztása változhat az elvég

Chunk 498:
March 16, 2025 at 6:31 AM, Horváth László SL/B: Hello everyone, There is an error on the monitor of Cell Buffer #3, opposite EOL row 5. Error: CRC2 c/v Light Curtain Detect Error. Please check it. Thank you.
March 16, 2025 at 6:53 AM, Denkó Jani (F.A.): Solved
March 16, 2025 at 8:58 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.16 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 499:
March 16, 2025 at 5:54 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————
March 16, 2025 at 10:02 PM, Sánta László: I need help with the line4 end plate gantry.

Chunk 500:
March 16, 2025 at 10:09 PM, Vékony Ferenc: This message was deleted.
March 16, 2025 at 10:59 PM, Csepi Árpád: Solved
March 16, 2025 at 11:00 PM, Sánta László: Thank you!
March 17, 2025 at 8:12 AM, FACS_JaewonShin: 17th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong

Chunk 501:
March 17, 2025 at 9:17 AM, FA CS AGV Jawad: @Shakir (MCS) bhae can you plz send this pallet back to its source U015852 End product - AGV 03. Line is not running anymore.
March 17, 2025 at 9:18 AM, Shakir (MCS): Working on It
March 17, 2025 at 9:33 AM, FA CS AGV Jawad: Plz make correction of Carrier - U015752
March 17, 2025 at 9:38 AM, Shakir (MCS): @ACS Please check AGV#03 I cancelled the previous job from MCS but still Job exist in ACS, that why transfer job is alternated. Thank you

Chunk 502:
March 17, 2025 at 10:32 AM, R. József C SL EOL: Gyertek kérlek eol 5-ös sorral szembeni out porthoz, ferdén rakta le a palettát
March 17, 2025 at 10:33 AM, Döme György F.A: Úton
March 17, 2025 at 10:43 AM, Boromisza Zoltán: Kész
March 17, 2025 at 10:44 AM, R. József C SL EOL: Köszönöm

Chunk 503:
March 17, 2025 at 11:20 AM, Shakir (MCS): @ACS Pallet U015752 job is alternated because of previous job of AGV#03 still exist in ACS. Could you please cancel the job from ACS. So that the carrier will move to its destination M0STK032_Z01. Thank you very much
March 17, 2025 at 11:38 AM, Hmyang(Hungary): @FACS_JaewonShin pls check this. Thx
March 17, 2025 at 11:41 AM, FACS_JaewonShin: Endproduct?
March 17, 2025 at 11:41 AM, Shakir (MCS): Yes

Chunk 504:
March 17, 2025 at 11:42 AM, FA CS AGV Jawad: I have turned off AGV due to charge..? Should i turn it on..?
March 17, 2025 at 11:43 AM, Shakir (MCS): The Job has been cancelled now Thank you
March 17, 2025 at 11:43 AM, FACS_JaewonShin: M0MGV031_VC03 job has been erased
March 17, 2025 at 11:43 AM, Shakir (MCS): Please turn on the agv please
March 17, 2025 at 11:44 AM, FA CS AGV Jawad: OMW

Chunk 505:
March 17, 2025 at 11:47 AM, Shakir (MCS): Now the AGV#03 is moving to its destination. ✅ Monitoring further Thank you
March 17, 2025 at 11:50 AM, 유경호(RYU KYEONGHO): @배병민 (Bae Byoungmin) 박스패킹 배출부 AGV 비활성화 요청드립니다. -5,6,9,10line 혼류 생산 테스트 진행 예정
March 17, 2025 at 11:56 AM, Shakir (MCS): The transfer job has been completed now. The pallet is stocked in M0STK032 (0102505) now AGV is unoccupied ✅. Thank you very much
March 17, 2025 at 12:02 PM, FACS_JaewonShin: 세팅 재확인 하겠습니다

Chunk 506:
March 17, 2025 at 6:39 PM, Éváné Bori Viktória: AGV 13 - mal probléma van, hibaüzenetet nem ír ki, kérlek nézzétek meg!
March 17, 2025 at 6:39 PM, N.Gábor F.A.: Megyünk
March 17, 2025 at 6:39 PM, Éváné Bori Viktória: Az EOL- nál.
March 17, 2025 at 6:40 PM, Éváné Bori Viktória: Köszi
March 18, 2025 at 8:40 AM, FACS_JaewonShin: 18th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 3 people - Team leader 1 Shin jaewon - mechanic 1 Son hyeongi - plc control 1 Jin jaejeong

Chunk 507:
March 18, 2025 at 10:35 AM, R. József C SL EOL: Hello Eol 3 sor előtt útban van az agv Küldjétek el kérlek
March 18, 2025 at 10:51 AM, FA CS AGV Jawad: I do
March 18, 2025 at 11:48 AM, R. József C SL EOL: Eol 5-ös sorral szemben #5 agv emergency alarm hibával áll
March 18, 2025 at 11:48 AM, Döme György F.A: Jövök
March 18, 2025 at 11:52 AM, R. József C SL EOL: Köszönöm

Chunk 508:
March 18, 2025 at 6:12 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13+1 Overtime Overtime (1): Böröcz Tamás Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Nagy Zsolt, Böröcz Tamás 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 18, 2025 at 6:21 PM, 원승연(Seungyeon Won): Buffer warehouse #3 check please

Chunk 509:
March 18, 2025 at 6:21 PM, 원승연(Seungyeon Won): Palette supply has been cut off
March 18, 2025 at 6:24 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.18 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 18, 2025 at 6:24 PM, Czébely Dániel SL—D: @Dávid F.A. @N.Gábor F.A.
March 18, 2025 at 6:24 PM, N.Gábor F.A.: Percek kérdése és ott vagyunk
March 18, 2025 at 6:25 PM, Czébely Dániel SL—D: Rendi

Chunk 510:
March 18, 2025 at 6:29 PM, Halász György SL: Hi, Modul GF line3 modul unloading AGV error.
March 18, 2025 at 6:30 PM, FA-CS-AGV-Masoud: It’s not AGV problem its port problem thanks 🙏
March 18, 2025 at 7:23 PM, Őri Imre: 3 sor block 1 hez kellene egy kis segítség! Köszönöm!
March 18, 2025 at 7:24 PM, N.Gábor F.A.: Megyünk
March 18, 2025 at 7:26 PM, FA-CS-AGV-Masoud: Solved
March 18, 2025 at 7:26 PM, Őri Imre: Thx.

Chunk 511:
March 18, 2025 at 10:42 PM, Őri Imre: 3 sor UPC burkolat betöltéshez kellene egy kis segítség! Betöltés közben megált a kis AGV
March 18, 2025 at 10:42 PM, Őri Imre: Köszönöm
March 18, 2025 at 10:43 PM, FA-CS-AGV-Masoud: Checking
March 18, 2025 at 10:46 PM, FA-CS-AGV-Masoud: Solved
March 18, 2025 at 10:52 PM, Czébely Dániel SL—D: @Dávid F.A. @N.Gábor F.A. We need some help at Buffer #1. Something knocked out the power source on the crane.
March 18, 2025 at 10:52 PM, N.Gábor F.A.: Megyünk

Chunk 512:
March 18, 2025 at 10:54 PM, Őri Imre: Thx!
March 18, 2025 at 11:58 PM, Czébely Dániel SL—D: @FA-CS-AGV-Masoud I would like to request the acceptance of AGV 13. The EOL is between 3-4.
March 18, 2025 at 11:58 PM, FA-CS-AGV-Masoud: Checking
March 19, 2025 at 12:02 AM, FA-CS-AGV-Masoud: Solved
March 19, 2025 at 12:03 AM, Czébely Dániel SL—D: Ty
March 19, 2025 at 12:14 AM, Halász György SL: Hi Modul GF line3-4 agv error
March 19, 2025 at 12:14 AM, FA-CS-AGV-Masoud: Checking

Chunk 513:
March 19, 2025 at 12:14 AM, Halász György SL: Thanks
March 19, 2025 at 12:15 AM, VK (mcs): @FA Please check Cell buffer M0STK011
March 19, 2025 at 12:18 AM, FA-CS-AGV-Masoud: Solved
March 19, 2025 at 12:18 AM, N.Gábor F.A.: This message was deleted.
March 19, 2025 at 12:19 AM, N.Gábor F.A.: Checking
March 19, 2025 at 12:34 AM, Éváné Bori Viktória: Sziasztok! Eol 4- nél a 12- es AGV sípol, nézzétek meg kérlek!
March 19, 2025 at 12:34 AM, FA-CS-AGV-Masoud: Checking

Chunk 514:
March 19, 2025 at 12:58 AM, N.Gábor F.A.: This message was deleted.
March 19, 2025 at 1:34 AM, N.Gábor F.A.: Is there a Korean technician out there who could help us with M0STK011?
March 19, 2025 at 1:37 AM, VK (mcs): @Baek Hojong(백호종)FA Could you please check There is an issue Cell buffer M0STK011 .thx
March 19, 2025 at 1:39 AM, Baek Hojong(백호종)FA: I will go now

Chunk 515:
March 19, 2025 at 5:16 AM, N.Gábor F.A.: Good morning We are leaving the warehouse M0STK011 in manual operation, the reason for this is that we encountered an error that unfortunately we could not solve, the cause of this error is probably in the PLC program, there was no PLC technician during the night, so we could not ask for help with this. Please have the daytime PLC colleague examine it. Thank you.

Chunk 516:
March 19, 2025 at 6:08 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9/11 Tech, 1Sl Overtime(0): Holiday(2): Pintye Miklós László, Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Denkó János --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(2): Gerbovits Kevin, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 517:
March 19, 2025 at 7:45 AM, 김희용 invited 동현.
March 19, 2025 at 7:45 AM, 김희용: .
March 19, 2025 at 9:11 AM, FACS_JaewonShin: 19th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 3 people - Team leader 1 Shin jaewon - mechanic 1 Lee yeongmin - plc control 1 Jin taehyeong
March 19, 2025 at 12:49 PM, Nikolett SL/B EOL: Sziasztok Eol 5 Line előtt van egy AGV ami útba van kérlek vigyétek arrébb köszönöm
March 19, 2025 at 12:49 PM, Duna Don: On the way

Chunk 518:
March 19, 2025 at 1:17 PM, 정낙정(JEONG NAK JEONG): 화성 미주출하용 Cell 생산 시작했습니다. 수동투입 및 배출 예정으로 화성 AGV 정지 부탁드립니다 @배병민 (Bae Byoungmin)
March 19, 2025 at 1:21 PM, Nikolett SL/B EOL: 17 es számú AGV vel ugyan ez a problémánk
March 19, 2025 at 1:24 PM, Duna Don: We are working on it. Thank you
March 19, 2025 at 1:27 PM, FACS_JaewonShin: 현장 조치 중입니다. 완료시 알려드리겠습니다.
March 19, 2025 at 1:28 PM, FACS_JaewonShin: FA CS will help you
March 19, 2025 at 1:28 PM, Duna Don: Thank you, Sir

Chunk 519:
March 19, 2025 at 1:29 PM, FACS_JaewonShin: When after change to manual, please turn off agv
March 19, 2025 at 1:30 PM, Duna Don: You mean we should switch off the AGV?
March 19, 2025 at 1:31 PM, FACS_JaewonShin: Yes and VC15 try to chage now, please check to block over charge
March 19, 2025 at 1:31 PM, Duna Don: Okay sir
March 19, 2025 at 1:43 PM, FACS_JaewonShin: 화성 AGV 전체 수동 전환 및 전원 OFF 완료 하였습니다. 재가동필요시 또는 AGV 위치이동시 FAAGV, FACS, FA technician 불러주시면 조치하겠습니다

Chunk 520:
March 19, 2025 at 2:26 PM, 배병민 (Bae Byoungmin): @정낙정(JEONG NAK JEONG) 박스포장기 자재가 없습니다. 확인 부탁드릴께요 Top cover
March 19, 2025 at 2:29 PM, 정낙정(JEONG NAK JEONG): 알겠습니다
March 19, 2025 at 4:30 PM, SKOH2/제조-셀,모듈 출하/김병호: @배병민 (Bae Byoungmin) @FACS_JaewonShin 배병민 PM님 안녕하세요 남측 셀 입고포트 M0CNV036_M01 포트에 base id : S100071 완제품 CCS로 수동입고중에 잡생성을 cell shot 아닌 module shot로 생성하여 해당포트에서 정지 상태입니다. 잡 삭제후에 입고 부탁드립니다.
March 19, 2025 at 4:34 PM, FACS_JaewonShin: Cell short로 입력되어있고 다른잡 생성이 되어있지않습니다. Loading 누르셨나요?

Chunk 521:
March 19, 2025 at 4:35 PM, SKOH2/제조-셀,모듈 출하/김병호: 넵
March 19, 2025 at 4:35 PM, SKOH2/제조-셀,모듈 출하/김병호: 로딩 버튼 눌러서 베이스 아이디 리딩상태입니다
March 19, 2025 at 4:36 PM, SKOH2/제조-셀,모듈 출하/김병호: 혹시 S발번이라 그런가요?
March 19, 2025 at 4:37 PM, FACS_JaewonShin: @mcs Could you check m0cnv036_m01? Carrier id, size, product status have been selected but it is not starting loading.
March 19, 2025 at 4:37 PM, FACS_JaewonShin: 현장으로 가보겠습니다.
March 19, 2025 at 4:37 PM, Mohammad Amir: Checking

Chunk 522:
March 19, 2025 at 4:38 PM, SKOH2/제조-셀,모듈 출하/김병호: 네 감사합니다
March 19, 2025 at 4:39 PM, Mohammad Amir: You would like to receive this material to STK034_Z01? Thank you!
March 19, 2025 at 4:39 PM, SKOH2/제조-셀,모듈 출하/김병호: Yes
March 19, 2025 at 4:40 PM, Mohammad Amir: Thank you Sir, working on it!
March 19, 2025 at 4:43 PM, FACS_JaewonShin: 현장에서 이동중 확인됩니다
March 19, 2025 at 4:43 PM, SKOH2/제조-셀,모듈 출하/김병호: 감사합니다
March 19, 2025 at 4:43 PM, FACS_JaewonShin: Could you tell me what was problem?

Chunk 523:
March 19, 2025 at 4:44 PM, Mohammad Amir: I have resolved the issue.✅ Carrier has startered to move. Thank you!
March 19, 2025 at 4:51 PM, Mohammad Amir: Actually Sir, Job was terminated from the CCS side at that time cause we received from CCS that this command can not be executed at 16:16. I have given the manual command to the carrier to send it to the desired destination STK034_Z01. ✅ Thank you!

Chunk 524:
March 19, 2025 at 6:04 PM, Tklcz Alexandra SL/A: Sziasztok! Az EOL AGV 16 vagy 13 útban van a targoncának, kérlek küldjétek el onnan.
March 19, 2025 at 6:11 PM, Mr.Miti (미티) FA: This message was deleted.

Chunk 525:
March 19, 2025 at 6:12 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(7): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás

Chunk 526:
March 19, 2025 at 6:45 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.19 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 19, 2025 at 9:03 PM, 원승연(Seungyeon Won): Box packing 사이드 커버 얼라인 전진 시 센서 미감지 됩니다. 조치 가능하신 테크니션이나 지원가능하신분 요청드립니다.
March 19, 2025 at 9:03 PM, KIM SEYEON [김세연]_FA: @Mr.Miti (미티) FA please check
March 19, 2025 at 9:04 PM, KIM SEYEON [김세연]_FA: also formation and module technicians. please check box packing machine.

Chunk 527:
March 19, 2025 at 9:09 PM, 배병민 (Bae Byoungmin): @Csepi Árpád Hello Please check the alignment cylinder lead sensor. Additionally, check the pallet misalignment and align it.
March 19, 2025 at 9:24 PM, Csepi Árpád: I’m already working on it!
March 19, 2025 at 9:24 PM, Csepi Árpád: The error is being resolved!
March 19, 2025 at 9:27 PM, 배병민 (Bae Byoungmin): 네 저희 FA 테크니션분이 조치중입니다. 야간에는 FA 테크니션으로 대응 진행이오니 문제 발생시 영문으로 부탁드리겠습니다. 감사합니다.
March 19, 2025 at 9:45 PM, 원승연(Seungyeon Won): 감사합니다

Chunk 528:
March 19, 2025 at 10:29 PM, Szentirmai Z. A/SSL: Hello! I'm asking for help with cell buffer#1. Error message: "SMC#1 fork left collapse detected 2" When the pallet was released, the stacker picked up the pallet, but it did not start. Thank you
March 19, 2025 at 11:17 PM, Szentirmai Z. A/SSL: @원승연(Seungyeon Won) Please help me! Thank you
March 19, 2025 at 11:18 PM, Szentirmai Z. A/SSL: @Csepi Árpád @Édl Tamás

Chunk 529:
March 19, 2025 at 11:19 PM, 원승연(Seungyeon Won): @technician Plz check Buffer #1 We are being delayed in our work.
March 19, 2025 at 11:25 PM, Magosi Erik: @Csepi Árpád 3as soron az alapanyag agv majdnem összeálltak. Kérlek nézd meg! Köszike
March 19, 2025 at 11:26 PM, FA-CS-AGV-Masoud: Checking
March 19, 2025 at 11:30 PM, Csepi Árpád: Solved
March 19, 2025 at 11:32 PM, 배병민 (Bae Byoungmin): What was the problem that caused the cargo to be detected?

Chunk 530:
March 19, 2025 at 11:33 PM, Magosi Erik: Problem solved by Masoud
March 19, 2025 at 11:33 PM, Magosi Erik: Thank You
March 19, 2025 at 11:35 PM, FA-CS-AGV-Masoud: You’re welcome sir
March 19, 2025 at 11:36 PM, Csepi Árpád: The M0STK 011 SCP 01. The barcode paper on the left side of the pallet has partially fallen off, which triggered the error!
March 19, 2025 at 11:37 PM, 배병민 (Bae Byoungmin): Thanks for the info. Thank you for your hard work.

Chunk 531:
March 19, 2025 at 11:39 PM, Csepi Árpád: You’re welcome!
March 20, 2025 at 3:37 AM, 원승연(Seungyeon Won): Can you move AGV#1? We need to work on line 11,12 EOL. Thank you!
March 20, 2025 at 3:38 AM, FA-CS-AGV-Masoud: Checking
March 20, 2025 at 4:28 AM, Tklcz Alexandra SL/A: Hello! EOL AGV 13 and 16 are in the way of the forklift, please remove them.
March 20, 2025 at 4:32 AM, FA-CS-AGV-Masoud: Coming

Chunk 532:
March 20, 2025 at 4:32 AM, Tklcz Alexandra SL/A: Sziasztok! Kérünk egy technikust a boxpackingre. 2. nyomtató állomáson van probléma.
March 20, 2025 at 5:04 AM, Csepi Árpád: Solved

Chunk 533:
March 20, 2025 at 6:24 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 1Sl Overtime(0): Holiday(1): Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Pintye Miklós László --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Gerbovits Kevin, Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 534:
March 20, 2025 at 6:43 AM, 정낙정(JEONG NAK JEONG): @배병민 (Bae Byoungmin) 08시부터 화성 AGV 가동 부탁드립니다
March 20, 2025 at 6:44 AM, FA/CS/AGV/Taimur: Hi, we will reinstate the AGV operation in EOL by that time. Thank you
March 20, 2025 at 7:27 AM, FACS_JaewonShin: 확인했습니다
March 20, 2025 at 7:47 AM, FACS_JaewonShin: 20th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong

Chunk 535:
March 20, 2025 at 8:02 AM, Horváth László SL/B: Please check AGV #17 at the EOL. Rear Steering Limit+ alarm. Thank you.
March 20, 2025 at 8:02 AM, FA/CS/AGV/Taimur: AGVs are being turned on. Thank you
March 20, 2025 at 9:07 AM, Nikolett SL/B EOL: Sziasztok Eol területén az AGV elállja az utat kérlek küldjétek arrébb köszönöm
March 20, 2025 at 9:10 AM, FA/CS/AGV/Taimur: Cleared.

Chunk 536:
March 20, 2025 at 11:46 AM, 정낙정(JEONG NAK JEONG): 현재 WMS - 자동화창고 출고(MCS) 메뉴에서 포장 진행했으나 Cell Buffer에서 배출되지 않고 있습니다. 확인부탁드립니다. @배병민 (Bae Byoungmin)
March 20, 2025 at 11:47 AM, Mohammad Amir: This message was deleted.
March 20, 2025 at 11:47 AM, Mohammad Amir: Sir, Please tell me carrier id of the materials,I will check. Thank you very much!

Chunk 537:
March 20, 2025 at 11:52 AM, 정낙정(JEONG NAK JEONG): I don't know the carrier ID, but the pallets are evenly distributed across M0STK011 to M0STK014 in the Cell Buffer. However, the outbound port is set to M0STK011_M02 as a single port.
March 20, 2025 at 11:57 AM, Mohammad Amir: Sir, There is one return currently in progress from M0STK011_M02 to STK11_Z01 carrier S100144 in progress. Currently M02 is set to IN type! Please tell me would you like to receive material at M02? Thank you very much!

Chunk 538:
March 20, 2025 at 11:58 AM, 정낙정(JEONG NAK JEONG): The supply of empty pallets from the Cell Buffer to EOL has also stopped. It seems that the Stacker Crane inside the Cell Buffer has stopped. Please check.
March 20, 2025 at 11:59 AM, Mohammad Amir: Checking
March 20, 2025 at 11:59 AM, 정낙정(JEONG NAK JEONG): no, we need to put out the pallets that should be boxpacked.

Chunk 539:
March 20, 2025 at 12:01 PM, Mohammad Amir: Sir, Empty pallet S100104 is on the way to EOL 6P01. Checking further. Thank you very much!
March 20, 2025 at 12:05 PM, Sazzad Bhai SKon: Okay we'll change the M02 input type as BOTH. Is it okay?
March 20, 2025 at 12:06 PM, 정낙정(JEONG NAK JEONG): If the command already entered in WMS is refreshed, will a new job be generated for the stacker?

Chunk 540:
March 20, 2025 at 12:08 PM, Sazzad Bhai SKon: If it's set as BOTH, the jobs must be done one by one. After you complete operations, we can roll it back as IN type.
March 20, 2025 at 12:08 PM, 배병민 (Bae Byoungmin): 네 잠시만요 처리해드리겠습니다
March 20, 2025 at 12:10 PM, 배병민 (Bae Byoungmin): @정낙정(JEONG NAK JEONG) 지금 완료됬습니다. 이제 정상 반송 될것으로 보입니다
March 20, 2025 at 12:11 PM, 양원석: 기존 Z,T 만 반송되게끔 인터락 걸어두어서 반송대상으로 선정되지않았습니다. S는 방금 추가했고 T는 제외시켜도되는건지문의드립니다.

Chunk 541:
March 20, 2025 at 12:13 PM, 정낙정(JEONG NAK JEONG): 넵 T는 제외 부탁드립니다. 그리고 3/21부터 신규 이너트레이 입고예정품 R로 채번예정이라 R도 추가 부탁드리겠습니다. R 파레트도 백스포장 진행예정입니다
March 20, 2025 at 12:16 PM, Nikolett SL/B EOL: Eol 7 es számú AGV kiállt hibára kérlek nézzétek meg
March 20, 2025 at 12:25 PM, FA/CS/AGV/Taimur: Hi, the AGV bumper has crashed with the small forklift which was parked in the operating way. There is no damage occurred to the AGV.

Chunk 542:
March 20, 2025 at 12:41 PM, Nikolett SL/B EOL: Eol 13 AGV t arrébb tudnátok küldeni? Köszönöm
March 20, 2025 at 6:28 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.20 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 20, 2025 at 11:48 PM, Tklcz Alexandra SL/A: Sziasztok! Boxpackingen inicializálási probléma van, kérlek nézze meg valaki.
March 20, 2025 at 11:57 PM, Csepi Árpád: Solved
March 20, 2025 at 11:58 PM, Tklcz Alexandra SL/A: Köszönjük.

Chunk 543:
March 21, 2025 at 12:02 AM, Csepi Árpád: Szívesen!
March 21, 2025 at 12:08 AM, Tklcz Alexandra SL/A: EOL AGV 17 útban van, küldjétek el.
March 21, 2025 at 12:09 AM, FA CS AGV David 데이비드: Coming
March 21, 2025 at 2:23 AM, Tklcz Alexandra SL/A: Szeretnénk a boxpackingra egy technikust, adathiba van.
March 21, 2025 at 3:07 AM, 한상범(Han Sang Beom): Box Packing Can not side cover tilt initial. Please check.
March 21, 2025 at 4:18 AM, Baek Hojong(백호종)FA: Solved

Chunk 544:
March 21, 2025 at 4:49 AM, Tklcz Alexandra SL/A: EOL AGV12 útban van, kérlek küldjétek el.
March 21, 2025 at 4:50 AM, FA CS AGV David 데이비드: Ok I'm coming
March 21, 2025 at 5:55 AM, FA/CS/AGV/Taimur: Hi @MCS PLEASE sent AGV: 12 from end product back to origin stocker as the line has stopped for a while.
March 21, 2025 at 5:55 AM, Shakir (MCS): Checking
March 21, 2025 at 6:00 AM, Shakir (MCS): @ACS Please delete the Job for AGV#12 from ACS side. Thank you.

Chunk 545:
March 21, 2025 at 6:01 AM, FA/CS/AGV/Taimur: Let me know once done, I am turning off the AGV to prevent battery drop.
March 21, 2025 at 6:12 AM, FA/CS/AGV/Taimur: >>>Update AGV:12 End product Line 3 recovery successful. Agv Is on charge now. Thank you
March 21, 2025 at 6:13 AM, 김지수PM(Gyuri)_FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time: 06:00–18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen

Chunk 546:
March 21, 2025 at 7:06 AM, R. József C SL EOL: Sziasztok Földszinten 4es bufferre nézzétek rá kérlek, kirakodás közben idő tullépésre állt meg
March 21, 2025 at 7:06 AM, R. József C SL EOL: Átjáró
March 21, 2025 at 7:23 AM, R. József C SL EOL: Oh, mai nap megy a boxpacking is
March 21, 2025 at 8:09 AM, R. József C SL EOL: 4es bufferre nezzetek rá kérlek Középső komvelyoron áll a paletta jelzés nélkül Betöltés pozícióban
March 21, 2025 at 8:10 AM, R. József C SL EOL: Átjáró

Chunk 547:
March 21, 2025 at 8:12 AM, Zoltán Harasztia FA: Kész
March 21, 2025 at 8:47 AM, FACS_JaewonShin: 21st march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - mechanic 2 Lee yeongmin Son hyeongi - plc control 2 Jin taehyeong Jin jaejeong
March 21, 2025 at 9:57 AM, R. József C SL EOL: Boxpackingra kérnénk segítséget Srácok elakadtak, Köszönöm
March 21, 2025 at 9:57 AM, Zoltán Harasztia FA: Megyünk

Chunk 548:
March 21, 2025 at 11:36 AM, 배병민 (Bae Byoungmin): @유경호(RYU KYEONGHO) PM님 금일 박스포장기 1시간 정도 비가동 가능하실까요? 사유는 판넬 전장부품 교체 건입니다.
March 21, 2025 at 12:13 PM, 정낙정(JEONG NAK JEONG): 진행하셔도 됩니다. 재가동 시 알림 부탁드리겠습니다.
March 21, 2025 at 12:14 PM, 배병민 (Bae Byoungmin): 네 감사합니다. 식사후 공지 드리고 진행하겠습니다.

Chunk 549:
March 21, 2025 at 1:12 PM, FACS_Hyeongi Son: SK OH2 Module CS Action Details 1.Date : 25.03.21(Fri) 2.Machine name : -F0BPM012_EQ_MPP 3. Action detail : -Main panel MC replacement 4.Work time -Start : 13:10 -End : 5. Remark(special note) :

Chunk 550:
March 21, 2025 at 1:51 PM, FACS_Hyeongi Son: SK OH2 Module CS Action Details 1.Date : 25.03.21(Fri) 2.Machine name : -F0BPM012_EQ_MPP 3. Action detail : -Main panel MC replacement 4.Work time -Start : 13:10 -End : 13:50 5. Remark(special note) : -The spare part and the model are different. Replacement failed -After checking the material quantity and model name, proceed with the replacement work again

Chunk 551:
March 21, 2025 at 2:09 PM, FACS_Hyeongi Son: SK OH2 Module CS Action Details 1.Date : 25.03.21(Fri) 2.Machine name : -F0BPM012_EQ_MPP 3. Action detail : -Main panel MC replacement 4.Work time -Start : 14:09 -End : 5. Remark(special note) :
March 21, 2025 at 2:20 PM, FACS_Hyeongi Son: SK OH2 Module CS Action Details 1.Date : 25.03.21(Fri) 2.Machine name : -F0BPM012_EQ_MPP 3. Action detail : -Main panel MC replacement 4.Work time -Start : 14:09 -End : 14:20 5. Remark(special note) : X

Chunk 552:
March 21, 2025 at 4:02 PM, R. József C SL EOL: Gyertek kérlek boxpackingra Oldalfal igazitó hibát jelez Illetve nem áll alap pozícióba
March 21, 2025 at 4:02 PM, R. József C SL EOL: Köszönöm
March 21, 2025 at 5:52 PM, Czébely Dániel SL—D: 16-os AGV riasztás állat van kéne egy kis hellp
March 21, 2025 at 6:00 PM, Czébely Dániel SL—D: @N.Gábor F.A.
March 21, 2025 at 6:15 PM, Éváné Bori Viktória: Sziasztok!

Chunk 553:
March 21, 2025 at 6:16 PM, Éváné Bori Viktória: CRC3 C/V 2 agv pio interface error 13 AGV a pio loading time over alarm EOL 3 - mal szemben a bufferben van

Chunk 554:
March 21, 2025 at 6:21 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:10/13+2 Overtime Overtime (1): Pálosi Róbert, Csanálosi Gábor Sick (0):- Holiday (2): Magyar Balázs, Oláh András Shift change(1): Novák Zoltán Elektróda:(3) Szabadi Miklós, Kiss Balázs, Pálosi Róbert Assembly(6): GF: Novák Zoltán, Béki Norbert, Csanálosi Gábor 1F: Zsurbej Zsolt, Nagy Zsolt, Kasztel Balázs Modul(2): Martina Dávid, Nagy Gábor
March 21, 2025 at 6:23 PM, Muneeb Ur Rehman: Solved

Chunk 555:
March 21, 2025 at 6:27 PM, Muneeb Ur Rehman: Fixed
March 21, 2025 at 6:29 PM, Éváné Bori Viktória: Thank you
March 21, 2025 at 6:50 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 556:
March 21, 2025 at 7:10 PM, 한상범(Han Sang Beom): EOL 5Line Cell packing에 공파레트 입고되지않고 있습니다. P1711에 S100255 Pallet 정보는 있으나 실물은 없습니다. 확인부탁드립니다. EOL 5Line Cell Packing is not stocked with blank pallets. There is S100255 Pallet information on P1711, but there is no real one. Please confirm.
March 21, 2025 at 7:13 PM, Hmyang(Hungary): @VK (mcs) pls check this. Thx

Chunk 557:
March 21, 2025 at 7:19 PM, VK (mcs): Last info about S100255 is Carrier data removed from EOL 6 port 1. For EOL 5 S100258 is on the AGV 15 and on the way.
March 21, 2025 at 8:01 PM, Czébely Dániel SL—D: @mcs Hello. I would like to ask for help from the warehouse between the formatting and the module (buffer #3) I need 2 pallets for what UNK At these locations: 1. 0200911 2. 0200811 And where I would like to ask: Unit ID (M0STK013_M01_OP01) TRACK ID: 15025

Chunk 558:
March 21, 2025 at 8:02 PM, VK (mcs): Checking
March 21, 2025 at 8:04 PM, VK (mcs): Unfortunately I can’t access to SCS.
March 21, 2025 at 8:20 PM, N.Gábor F.A.: Hello The 0200911 is UNKDBS--2503181841142 The 0200811 is UNKDBS--2503181838131 This is the Carrier IDs
March 21, 2025 at 8:30 PM, VK (mcs): I tried to transfer to manual port but job alternated. Reply is HCACK 10(mismatch cassette size)
March 21, 2025 at 8:45 PM, N.Gábor F.A.: Unfortunately, I can't ask for it within SCS either.

Chunk 559:
March 21, 2025 at 8:49 PM, Hmyang(Hungary): Hi why don't you ask for Korean night shift@Ji seokbum and @이주봉PM LEE JUBONG(FA) ? Thx
March 21, 2025 at 8:57 PM, 한상범(Han Sang Beom): Please move to AGV#16. Thank you.
March 21, 2025 at 8:59 PM, Hmyang(Hungary): @Muneeb Ur Rehman pls check this
March 21, 2025 at 9:00 PM, Muneeb Ur Rehman: I fixed it
March 21, 2025 at 9:01 PM, Muneeb Ur Rehman: Done

Chunk 560:
March 21, 2025 at 9:11 PM, VK (mcs): @이주봉PM LEE JUBONG(FA) There is problem to transfer this material to the manual port, M0STK013_M01 could you please check it. Thx
March 22, 2025 at 3:34 AM, Czébely Dániel SL—D: @all There is a small problem with the box packing machine, the side cover separator is not working properly, I can't find it, please reset it

Chunk 561:
March 22, 2025 at 5:17 AM, 조보행(CHO BO HAENG): □ 공정 이상 발생 보고 □ 1. 모델/라인 - Box packing/Side cover투입부 2. 발생 현상 - Grip 알람 발생 212 사이드커버 리프트 상승 후 틸트 사이드 그립 진행시 사이드 그립 위치 이상으로 알람발생 3. 시간 - 공정이상발ї생 시간 : 03:30~ - 공정이상완료 시간 : - 보전시간(업체포함) : - 설비정지시간 : 4. 문제점 및 원인 - FA 테크니션 원인파악 진행중 5. 피해사항 - 박스포장 진행불가 6. 조치내용 @배병민 (Bae Byoungmin) @이주봉PM LEE JUBONG(FA) @노영일 (Yeongil Noh) @심정민 (Shim Jungmin) @유경호(RYU KYEONGHO)

Chunk 562:
March 22, 2025 at 6:13 AM, R. József C SL EOL: Sziasztok Segítséget kérnék boxpackingra Oldalburkolat résznél van gond
March 22, 2025 at 6:22 AM, Döme György F.A: Amint tudok érkezek.Elektródán vagyok műszakátadáson.
March 22, 2025 at 7:15 AM, 이주봉PM LEE JUBONG(FA): 조치내용: 2번 포지션 위치 3mm 낮게 셋팅후 설비 재가동 시켰습니다.
March 22, 2025 at 8:55 AM, 양원석: @배병민 (Bae Byoungmin) 두개 화물 팔레트 크기 정보가 둘다 None입니다. 수정후 조치필요하므로 참고부탁드리니다
March 22, 2025 at 9:33 AM, R. József C SL EOL: Ismét segítséget szeretnék kérni

Chunk 563:
March 22, 2025 at 9:39 AM, Döme György F.A: Jelenleg fent vagyunk egy másik problémánál a 2.-on.Amint tudunk megyünk.
March 22, 2025 at 9:44 AM, R. József C SL EOL: Eolon kérlek 2-es sor környékéről kérlek küldjétek el, útban vannak
March 22, 2025 at 10:10 AM, FA CS AGV Jawad: Can some one plz check ST011-0P 02..there is alarm.
March 22, 2025 at 10:10 AM, FA CS AGV Jawad: Carrier data receive time out error. EOL sidr
March 22, 2025 at 10:55 AM, R. József C SL EOL: Esetleg? 5 perc lenne

Chunk 564:
March 22, 2025 at 10:55 AM, Herceg Sándor SSL/C: Sziasztok! A boxpackingen azóta is állunk. Nem tudjuk elindítani
March 22, 2025 at 11:34 AM, [민겸]MinGyum: @배병민 (Bae Byoungmin) Box포장기 오류발생 했다고 합니다. 확인 부탁드립니다.
March 22, 2025 at 11:34 AM, 배병민 (Bae Byoungmin): 네 지금 테크니션 위치로 이동중입니다
March 22, 2025 at 11:35 AM, KIM SEYEON [김세연]_FA: @Döme György F.A please check box packing machine

Chunk 565:
March 22, 2025 at 11:58 AM, R. József C SL EOL: Valaki legyen szíves jönni ,eol 9-es sorral szembeni betöltő portnál áll az agv illetve a porton pihen egy paletta pluszba Crc2 C/v #01 stk liget curtain detect error
March 22, 2025 at 11:58 AM, Döme György F.A: Jövök
March 22, 2025 at 12:03 PM, FA CS AGV Jawad: @Shakir (MCS) can you plz check status of S100330 at STK011 -OP 2
March 22, 2025 at 12:06 PM, Shakir (MCS): There is already transfer job exist for destination M0STK012_Z01. Thank you

Chunk 566:
March 22, 2025 at 1:35 PM, FA CS AGV Jawad: @Shakir (MCS) bhae is there any job for 5 EOL ( Formation). They need empty pallets.
March 22, 2025 at 1:35 PM, Shakir (MCS): Checking
March 22, 2025 at 1:35 PM, FA CS AGV Jawad: Thanks
March 22, 2025 at 1:38 PM, Shakir (MCS): Yes there is transfer job for EOL5 but its is delayed by 40mins because the source M0STK011 crane is OOS. Please check FA. Thank you
March 22, 2025 at 1:39 PM, Shakir (MCS): @FA Please check M0STK011 crane timeout. Thank you

Chunk 567:
March 22, 2025 at 2:06 PM, R. József C SL EOL: This message was deleted.
March 22, 2025 at 2:06 PM, R. József C SL EOL: Valaki legyen szíves jönni ,eol 9-es sorral szembeni betöltő portnál áll az agv illetve a porton pihen egy paletta pluszba Crc2 C/v #01 stk liget curtain detect error
March 22, 2025 at 2:08 PM, Döme György F.A: Nem tudom mikor érek oda,mert máshol is hiba van.
March 22, 2025 at 2:12 PM, R. József C SL EOL: 5-6 eol sorokra nem érkezik üres paletta, nézzetek rá kérlek

Chunk 568:
March 22, 2025 at 2:12 PM, R. József C SL EOL: Jelenleg manuál töltés megy ne legyen állása a gépnek
March 22, 2025 at 2:16 PM, 배병민 (Bae Byoungmin): @양원석 PM님 EOL에서 셀버퍼로 넘어오는 팔레트 정보가 간헐적으로 None로 발생되고있는데 저희 상위 시스템 문제는 아닌거죠?
March 22, 2025 at 2:22 PM, Shakir (MCS): There is transfer job for EOL5/06 Please confirm that port M0STK011_P05 Is it empty or full. Thank you
March 22, 2025 at 2:24 PM, FA CS AGV Jawad: Its empty

Chunk 569:
March 22, 2025 at 2:24 PM, Shakir (MCS): Now AGV12 has been assigned for line 6 carrier on the way.
March 22, 2025 at 2:25 PM, FA CS AGV Jawad: However, P5 there is a pallet and its not moving , can you check S100423
March 22, 2025 at 2:30 PM, Shakir (MCS): Carrier S100423 at P06 ?
March 22, 2025 at 2:32 PM, Shakir (MCS): There is carrier at P12 after remove the carrier move further Thank you
March 22, 2025 at 2:33 PM, FA CS AGV Jawad: Yes

Chunk 570:
March 22, 2025 at 2:34 PM, 양원석: Fullempty정보가 NA인거 말씀하시는거면 공정설비단에서 받는 값입니다
March 22, 2025 at 2:35 PM, Shakir (MCS): The storage-carriertranfer reply is okay.
March 22, 2025 at 2:44 PM, 배병민 (Bae Byoungmin): 네 알겠습니다. 감사합니다
March 22, 2025 at 2:48 PM, Shakir (MCS): Transfer job has been completed for this carrier ✅
March 22, 2025 at 2:54 PM, R. József C SL EOL: Kérlek gyertek ismét gond van a burkolat felvételnél

Chunk 571:
March 22, 2025 at 2:58 PM, 배병민 (Bae Byoungmin): @심정민 (Shim Jungmin) PM님 안녕하세요 5,6라인 S..팔레트 생산 이후 EOL에서 버퍼창고로 보내지는 Full 팔레트 정보가 None로 누락되어 셀버퍼 투입시 계속적으로 오류가 발생되고 있습니다. 지금은 수동으로 계속 정보 변경하고있으나 생산에 Loss가 생겨 급히 확인 부탁드립니다
March 22, 2025 at 3:19 PM, 심정민 (Shim Jungmin): 누락된 정보가 뭔지 확인 후 공유해 주셔야 확인 가능 합니다. CPM ~ AGV UL CV까지는 문제 없이 나간거 같은데, CPM에서 정보 누락 된거면 AGV UL CV에서 배출하지 않고 알람이 발생해야 했을거같은데 확인 후 공유 해주세요

Chunk 572:
March 22, 2025 at 3:24 PM, 배병민 (Bae Byoungmin): Full/Empty 정보 없이 보내지고있고 셀버퍼 자동 포트에서 투입시 정보가없어 알람 발생되고 있습니다. 투입시 정보에 대한 Validation 진행하고있고 배출단에서는 별도 확인은 없습니다. 정보가 안올라오는 부분 확인 및 조치 요청드립니다
March 22, 2025 at 3:26 PM, 심정민 (Shim Jungmin): @배병민 (Bae Byoungmin) Full/empty 정보가 없는게 맞나요? 위에 양원석PM님? 말씀보면 화물 사이즈가 None 이라는거 같은데요?
March 22, 2025 at 3:27 PM, R. József C SL EOL: Eol 3as sornál útban vannak az agv-k Kérlek küldjétek tovább

Chunk 573:
March 22, 2025 at 3:28 PM, 배병민 (Bae Byoungmin): 오늘 오류 발생된건 Full/Empty 정보 없이 되었습니다.
March 22, 2025 at 3:28 PM, KIM SEYEON [김세연]_FA: @심정민 (Shim Jungmin) 피엠님 Full/Empty가 아닌 None으로 정보가 왔습니다. 화물 사이즈는 Short로 들어왔습니다. 제가 오전 현장 확인하였습니다.
March 22, 2025 at 3:34 PM, R. József C SL EOL: Please, manual fork lift dont move , this agv dont move just wait

Chunk 574:
March 22, 2025 at 3:45 PM, 심정민 (Shim Jungmin): @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 일단 화물 사이즈는 투입 될때 LD CV에서 받은 정보 그대로 UL CV로 드리는 부분 이니 이부분도 확인 부탁 드립니다. 지금 프로그램 보고있는데 S로 팔레트 ID 변경됬다고 문제될 부분은 아직 없어보입니다. CPM 배출 시에 MES 보고 문제도 없었던 것 같으니 당장 CPM 쪽 더 확인은 어렵네요. 다만, 인터 페이스 사양 협의 시 none/Full/empty 의 Data가 0/1/2 라서, 0은 Data 누락인지, 아닌지 구분이 안되니 변경 요청 드렸으나 AGV CV 쪽에서 대응이 안되어 유지 했었습니다. 위 부분은 보완이 필요해보이니 검토 후 말씀 부탁드립니다. 일정 주시면 대응 하겠습니다.
March 22, 2025 at 3:47 PM, 심정민 (Shim Jungmin): Photo

Chunk 575:
March 22, 2025 at 3:48 PM, 심정민 (Shim Jungmin): End 도 같이 보완 되야겠네요. 검토 부탁드립니다.
March 22, 2025 at 3:52 PM, FA CS AGV Jawad: @Shakir (MCS) can you plz check the status of this pallet PS210- 2502190085 Raw Material
March 22, 2025 at 3:54 PM, FA CS AGV Jawad: Is it destined for M4MFA300_P32 ?
March 22, 2025 at 3:55 PM, Shakir (MCS): Checking
March 22, 2025 at 3:56 PM, Shakir (MCS): Yes the Job destination M4MFA300_P32 currently at agv 03. Thank you

Chunk 576:
March 22, 2025 at 3:57 PM, FA CS AGV Jawad: Yes...but AGV doesnot unload there
March 22, 2025 at 3:58 PM, Shakir (MCS): Please check port P32 full or empty
March 22, 2025 at 3:59 PM, Shakir (MCS): In MSC, PS210-2502190077 current location is M4MFA300_P32.
March 22, 2025 at 3:59 PM, FA CS AGV Jawad: Its empty and lift is down.
March 22, 2025 at 4:02 PM, FA CS AGV Jawad: This pallet has been removed out of port so plz update the status
March 22, 2025 at 4:02 PM, Shakir (MCS): On it

Chunk 577:
March 22, 2025 at 4:04 PM, 배병민 (Bae Byoungmin): 네, 차주 월요일 해당부분은 협의하는것으로 하겠습니다. 우선, 현재 배출시 "1" 로 보고가 안되고 "0" 로 보고되는 상황은 어떠한 부분일까요? Full 팔레트가 정상적으로 "1" 보고되면 문제가 없을꺼 같긴한데 이부분도 배출단이 보완되어야 하는 상황일까요?
March 22, 2025 at 4:06 PM, R. József C SL EOL: Eol 10-es sorral szemben out portál probléma van, nem tudom megnezni mi a hiba, ott áll még másik agv is
March 22, 2025 at 4:08 PM, R. József C SL EOL: Boxpackingon is hiba van Oldalfalnál megint rosszul fogta meg a transfer Kérlek gyertek ide is

Chunk 578:
March 22, 2025 at 4:08 PM, Shakir (MCS): AGV arrived front of the port and idle
March 22, 2025 at 4:10 PM, Shakir (MCS): Now the AGV unload the pallets ✅ Issue has been resolved Thank you
March 22, 2025 at 4:10 PM, 심정민 (Shim Jungmin): 정확히 어디서 Data 누락이 발생되는지는 CPM, AGV CV, AGV 다 확인 해봐야 알것 같은데, 일단 CPM 배출 시 적재정보 있는데 none(0) 일 경우가 있는지 Cnt Chk 추가해서 확인해보겠습니다.
March 22, 2025 at 4:11 PM, 배병민 (Bae Byoungmin): 네, 감사합니다 월요일 제가 9시쯤 화성으로 가겠습니다.
March 22, 2025 at 4:55 PM, R. József C SL EOL: Coming please

Chunk 579:
March 22, 2025 at 5:23 PM, 배병민 (Bae Byoungmin): @Döme György F.A Please check the box packing machine error. It is on the side cover assembly side.
March 22, 2025 at 5:32 PM, Döme György F.A: Solved
March 22, 2025 at 5:35 PM, R. József C SL EOL: Thanks

Chunk 580:
March 22, 2025 at 6:08 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Hufnágel Dániel Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs
March 22, 2025 at 6:29 PM, Éváné Bori Viktória: Sziasztok! Az EOL 5-6 előtt az AGV k útban vannak, küldjétek el őket!

Chunk 581:
March 22, 2025 at 6:29 PM, N.Gábor F.A.: Megyünk
March 22, 2025 at 6:29 PM, FA-CS-AGV-Masoud: Coming
March 22, 2025 at 6:38 PM, Éváné Bori Viktória: Eol5-6 AGV18 please
March 22, 2025 at 6:39 PM, FA-CS-AGV-Masoud: Coming
March 22, 2025 at 6:56 PM, Czébely Dániel SL—D: @N.Gábor F.A. Sziasztok tudtok jönni a Box packinghoz?
March 22, 2025 at 6:56 PM, N.Gábor F.A.: Megyünk
March 22, 2025 at 10:47 PM, Halász György SL: Hi, Modul GF line4 agv error.
March 22, 2025 at 10:47 PM, FA-CS-AGV-Masoud: Coming

Chunk 582:
March 22, 2025 at 10:47 PM, Halász György SL: Thanks
March 22, 2025 at 10:52 PM, FA-CS-AGV-Masoud: Solved
March 22, 2025 at 11:09 PM, Czébely Dániel SL—D: @FA-CS-AGV-Masoud Hello, AGV 13 is on the road, please move it forward.
March 22, 2025 at 11:09 PM, FA-CS-AGV-Masoud: Coming
March 22, 2025 at 11:10 PM, Czébely Dániel SL—D: solved
March 23, 2025 at 12:48 AM, Éváné Bori Viktória: Az összes AGV várakozó állásban van az EOL- on. Nem hoznak palettát. Kérlek nézzétek meg!

Chunk 583:
March 23, 2025 at 12:48 AM, FA-CS-AGV-Masoud: Coming
March 23, 2025 at 12:49 AM, Éváné Bori Viktória: Wait, they set off. Sorry
March 23, 2025 at 12:50 AM, FA-CS-AGV-Masoud: No worries

Chunk 584:
March 23, 2025 at 12:52 AM, 조보행(CHO BO HAENG): □ 공정 이상 발생 보고 □ 1. 모델/라인 - Box packing/스폰지 Transfer 2. 발생 현상 - SP TR Y2Origin Return Req. Err - SP TR Y1Origin Return Req. Err 3. 시간 - 공정이상발생 시간 : 00:20~ - 공정이상완료 시간 : - 보전시간(업체포함) : - 설비정지시간 : 4. 문제점 및 원인 - FA 이주봉 PM 연락 후 조치 대기중 5. 피해사항 - 박스포장 진행불가 6.조치내용 @배병민 (Bae Byoungmin) @이주봉PM LEE JUBONG(FA) @노영일 (Yeongil Noh) @심정민 (Shim Jungmin) @유경호(RYU KYEONGHO)

Chunk 585:
March 23, 2025 at 1:52 AM, 이주봉PM LEE JUBONG(FA): □ 공정 이상 발생 보고 □ 1. 모델/라인 - Box packing/스폰지 Transfer 2. 발생 현상 - SP TR Y2Origin Return Req. Err - SP TR Y1Origin Return Req. Err 3. 시간 - 공정이상발생 시간 : 00:20~01:30 4. 문제점 및 원인 - FA 이주봉 PM 연락 후 조치 대기중 5. 피해사항 - 박스포장 진행불가 6.조치내용 설비 이니셜 실행 후 재가동
March 23, 2025 at 2:35 AM, Éváné Bori Viktória: Buffer1 jelzést ad, nem működik, kérlek nézzétek meg.
March 23, 2025 at 2:44 AM, N.Gábor F.A.: Kész

Chunk 586:
March 23, 2025 at 3:55 AM, Szijjártó Balázs: Van egy kis pitty-putty a modul magasraktárnál, az egyik AGV pirosban nyüszít.
March 23, 2025 at 3:55 AM, N.Gábor F.A.: Megyünk meg lessük
March 23, 2025 at 3:55 AM, FA-CS-AGV-Masoud: Coming
March 23, 2025 at 6:23 AM, R. József C SL EOL: Sziasztok Gyertek kérlek boxpackingra Oldalfal igazitónál hiba van O2u11-Align alarm Side tilting részén
March 23, 2025 at 6:24 AM, Zoltán Harasztia FA: Most érünk át , mindjárt ott vagyok

Chunk 587:
March 23, 2025 at 6:46 AM, Döme György F.A: Kész
March 23, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.23 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 23, 2025 at 3:08 PM, R. József C SL EOL: Gyertek kérlek GF cellbuffer#2 Smc1 fork right collapse detect 1 hibával áll
March 23, 2025 at 3:09 PM, Döme György F.A: Megyek
March 23, 2025 at 3:09 PM, R. József C SL EOL: Köszönöm

Chunk 588:
March 23, 2025 at 3:23 PM, R. József C SL EOL: @Zoltán Harasztia FA Sajnos a boxpacking megvár titeket
March 23, 2025 at 3:23 PM, Döme György F.A: Kész
March 23, 2025 at 6:11 PM, Czébely Dániel SL—D: @N.Gábor F.A. Sziasztok gyertek légyszíves az EOL 5 elé
March 23, 2025 at 6:12 PM, N.Gábor F.A.: Hali Még csak most megyünk át Műszak átadáson voltunk eddig
March 23, 2025 at 6:13 PM, Czébely Dániel SL—D: Rendben a #3-as buffer egyik kitöltő portja nem áll visza alaphelyzetbe

Chunk 589:
March 23, 2025 at 6:14 PM, N.Gábor F.A.: Érkezünk amint lehet
March 23, 2025 at 6:31 PM, N.Gábor F.A.: Kész
March 23, 2025 at 6:40 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 23, 2025 at 7:43 PM, Czébely Dániel SL—D: Sziasztok szeretnék segítséget kérni. Nem tudjuk kikérni ezeket a maletákat: S100487 S100489 S100488 S100492 S100490 S100493 S100491 S100494 Adat elenörzés lenne szükséges.

Chunk 590:
March 23, 2025 at 7:43 PM, Czébely Dániel SL—D: @N.Gábor F.A.
March 23, 2025 at 8:24 PM, N.Gábor F.A.: Vissza töröltem a beragadt munkákat Újra ki kell adni a parancsokat és működni fog
March 23, 2025 at 9:35 PM, Czébely Dániel SL—D: Sziasztok box packingra tudnátok jönni ?
March 23, 2025 at 9:35 PM, Czébely Dániel SL—D: @N.Gábor F.A.
March 23, 2025 at 10:51 PM, Halász György SL: Sziasztok Modulon szeretnénk sor takarítás miatt, útban lévő AGVátmozgatását

Chunk 591:
March 24, 2025 at 12:09 AM, Éváné Bori Viktória: Sziasztok! Az SGV- k útban vannak az EOL 5-6 elöl, küldjétek el kérlek! Targoncás közlekedés lesz.
March 24, 2025 at 12:34 AM, Éváné Bori Viktória: Sziasztok! Koreai támogatónk kérésére, az összes AGV- t ki kellene kapcsolni az EOL- én.
March 24, 2025 at 12:35 AM, FA CS AGV David 데이비드: Okay
March 24, 2025 at 12:36 AM, Dániel Hufnágel: Szia, jó estét! Lehetne tudni, hogy ki is pontosan ez a koreai támogató név szerint?

Chunk 592:
March 24, 2025 at 12:36 AM, Éváné Bori Viktória: Természetesen. @한상범(Han Sang Beom)
March 24, 2025 at 12:36 AM, Dániel Hufnágel: És még esetleg, hogy milyen inditatásból, és ezt F.A sok közül megbeszélte e valakivel
March 24, 2025 at 12:36 AM, Dániel Hufnágel: Köszönöm
March 24, 2025 at 12:42 AM, Éváné Bori Viktória: Váltottunk az S jelőlésű palettákról a T jelőlésű palettákra. A teszt után a T típusú paletták nem érkeztek meg AGV- vel így kérte a manuális ki és betöltést.

Chunk 593:
March 24, 2025 at 12:42 AM, Dániel Hufnágel: Okés, köszi a választ
March 24, 2025 at 1:02 AM, Éváné Bori Viktória: Sziasztok! @N.Gábor F.A. gyere kérlek az EOL- ra
March 24, 2025 at 1:03 AM, N.Gábor F.A.: Megyek 🫠
March 24, 2025 at 1:05 AM, Dániel Hufnágel: @Éváné Bori Viktória Az EOL 5-6 sorra kellene?
March 24, 2025 at 1:07 AM, Éváné Bori Viktória: Igen. Mr Han azt kérte ( azt mondta a veled való konzultáció után) hogy el kell indítjuk az AGV- ket, hogy hozzák vigyék a palettákat.

Chunk 594:
March 24, 2025 at 1:12 AM, Dániel Hufnágel: Majdnem ezt beszéltük igen, kisebb-nagyobb különbésgel, viszont RTD ben ninenek a sorok átállítva ezért nem viszi az AGV a T-s palettákat
March 24, 2025 at 1:14 AM, Éváné Bori Viktória: Van olyan opció a MES- ben, de hozzáférésem az nincs.
March 24, 2025 at 1:14 AM, Dániel Hufnágel: Az jó
March 24, 2025 at 1:15 AM, Dániel Hufnágel: Pillanat és ott vagyok
March 24, 2025 at 1:15 AM, Éváné Bori Viktória: Köszi

Chunk 595:
March 24, 2025 at 3:25 AM, Czébely Dániel SL—D: Hello! Gyertek légyszíves a box packinghez
March 24, 2025 at 4:48 AM, 조보행(CHO BO HAENG): □ 공정 이상 발생 보고 □ 1. 모델/라인 - Box packing/1단 파레트 밴딩기 2. 발생 현상 - 좌측 밴딩기 밴딩진행시 밴딩미완료 지속발생 3. 시간 - 공정이상발생 시간 : 03:25~ - 공정이상완료 시간 : - 보전시간(업체포함) : - 설비정지시간 : 4. 문제점 및 원인 - FA 테크니션 점검 진행중 5. 피해사항 - 6. 조치사항 @배병민 (Bae Byoungmin) @이주봉PM LEE JUBONG(FA) @심정민 (Shim Jungmin) @유경호(RYU KYEONGHO) @노영일 (Yeongil Noh)

Chunk 596:
March 24, 2025 at 6:11 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.24 Time:06:00-18:00 1. Jung woojun 2. Baek hojong Köszönöm szépen

Chunk 597:
March 24, 2025 at 6:40 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 598:
March 24, 2025 at 7:29 AM, Avacz Beáta: Sziasztok! Line 4 end platenél lenne szükségünk segítségre. Tudnátok jönni?
March 24, 2025 at 8:02 AM, FACS_JaewonShin: 24th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 24, 2025 at 8:25 AM, 박태영: From today, any changes to RTD and MCS related logic cannot be made without Park Taeyoung PM's approval.

Chunk 599:
March 24, 2025 at 9:16 AM, 원승연(Seungyeon Won): @배병민 (Bae Byoungmin) @노영일 (Yeongil Noh) 안녕하세요 PM님 M0STK013에 있는 UNKNOWN 팔레트 확인 필요한데 도움 요청드립니다. S 타입 팔레트인지 확인해야합니다. UNK-2503190310563 UNK-2501272305488
March 24, 2025 at 9:17 AM, 배병민 (Bae Byoungmin): 제가 잠시뒤 갈께요 원자재좀 대응하고 연락드릴께요
March 24, 2025 at 9:21 AM, 원승연(Seungyeon Won): 감사합니다
March 24, 2025 at 9:28 AM, Hmyang(Hungary): Noted well. Thx

Chunk 600:
March 24, 2025 at 12:26 PM, 배병민 (Bae Byoungmin): @노영일 (Yeongil Noh) PM님 금일 박스 해체기 테스트건 명일로 해도 괜찮을까요? 박스포장기 이슈로 금일 좀 어려울꺼 같습니다. 박스포장기는 일부 케이블 단선으로 확인되어 교체를 해야해서 시간이 좀 걸리는 상황입니다.
March 24, 2025 at 12:36 PM, Avacz Beáta: Sziasztok, line 4 cella betöltésnél nem érzékeli az AGV a raklapot. Tudna valaki jönni?
March 24, 2025 at 12:36 PM, FA CS AGV Jawad: Yes
March 24, 2025 at 12:37 PM, Avacz Beáta: Köszi megoldottam :)

Chunk 601:
March 24, 2025 at 12:42 PM, Magosi Erik: M1MFA300_P06 we waiting for empty dunnage but not coming. Is there any problem?
March 24, 2025 at 12:42 PM, 노영일 (Yeongil Noh): 저는 괜찮은데 DT인원이 급하게 이반차로 오셔서요 @준용 매니저님 내일 오전 테스트 가능하실까요?
March 24, 2025 at 12:42 PM, 준용: 알겟습니다. 내일 오전으로 알고있겠습니다.
March 24, 2025 at 12:44 PM, Sazzad Bhai SKon: P06 is out of service now

Chunk 602:
March 24, 2025 at 12:45 PM, Mohammad Amir: There is already a job for carrier U016859 it is not completed cause P06 line -1 is OOS ,i already informed the FA team. Thank you!
March 24, 2025 at 12:46 PM, Magosi Erik: Line is running.. is it still in oos?
March 24, 2025 at 12:46 PM, Magosi Erik: Check again please if possible
March 24, 2025 at 12:47 PM, Mohammad Amir: Yes it is still OOS.
March 24, 2025 at 12:48 PM, Magosi Erik: I did a reset. Is it still oss?

Chunk 603:
March 24, 2025 at 12:49 PM, Mohammad Amir: Yes it is still OOS,I send the FA team reminder about this error. Thank you!
March 24, 2025 at 12:49 PM, Magosi Erik: Thank You
March 24, 2025 at 12:50 PM, Mohammad Amir: You are welcome!
March 24, 2025 at 3:02 PM, Avacz Beáta: Line 4 en az 1 es blocknál a papír csomagolás hulladékos buffer nrm működik. Nézzetek rá légyszi. Köszi

Chunk 604:
March 24, 2025 at 5:24 PM, 배병민 (Bae Byoungmin): @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) 박스포장기 정상 조치 완료 되었으며, 생산 진행 하셔도 괜찮겠습니다. 조치가 늦어 죄송합니다.

Chunk 605:
March 24, 2025 at 6:21 PM, Szücs Géza FT-B: Jó estét! Good morning! "B" műszak, 8+3/11(+1) Tech, 1Sl Overtime(3): Novák Zoltán, Novák Károly, Béki Norbert Holiday(3+1): Czeilinger Krisztián, Gerbovits Kevin, Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Novák Zoltán, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Pintye Miklós László, Béki Norbert --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János ----

Chunk 606:
March 24, 2025 at 11:03 PM, Horváth László SL/B: Please check the 16 AGV at the EOL. There is a timeout error at the filler port, opposite the 3rd line. Thank you.
March 24, 2025 at 11:03 PM, Muneeb Ur Rehman: On my way
March 24, 2025 at 11:04 PM, Muneeb Ur Rehman: Fixed
March 24, 2025 at 11:04 PM, Horváth László SL/B: Thank u

Chunk 607:
March 24, 2025 at 11:31 PM, Horváth László SL/B: Please also check the monitor next to the AGV. There is still an error message on it, and the pallet transport has stopped. Thank you.
March 24, 2025 at 11:31 PM, Muneeb Ur Rehman: Okay sure.
March 24, 2025 at 11:36 PM, Horváth László SL/B: @Boromisza Zoltán @Denkó Jani (F.A.) Gyertek kérlek
March 24, 2025 at 11:39 PM, Denkó Jani (F.A.): Úton
March 24, 2025 at 11:50 PM, Denkó Jani (F.A.): Solved

Chunk 608:
March 25, 2025 at 5:05 AM, Vadász Dóra SSL/B: Sziasztok! Targis meló van a földszinten. Tud valaki jonni elküldeni az útból az agv-ket? Köszönöm!
March 25, 2025 at 5:08 AM, Boromisza Zoltán: Úton
March 25, 2025 at 5:14 AM, Boromisza Zoltán: Kész

Chunk 609:
March 25, 2025 at 6:08 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 610:
March 25, 2025 at 8:00 AM, FACS_JaewonShin: 25th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 25, 2025 at 8:01 AM, 배병민 (Bae Byoungmin): @노영일 (Yeongil Noh) @준용 금일 박스포장기 자동 반송 테스트 오전 10시에 시작하려고 합니다. 시간 괜찮으실까요? ㄴ 완제품 > 박스해체기 > 셀버퍼
March 25, 2025 at 8:09 AM, Tklcz Alexandra SL/A: Hi! AGV13 útban van, el tudnátok küldeni? EOL

Chunk 611:
March 25, 2025 at 8:17 AM, 준용: 알겟습니다 자재 공유좀 부탁드립니다.
March 25, 2025 at 8:31 AM, 배병민 (Bae Byoungmin): 네, 메일로 공유드리겠습니다.
March 25, 2025 at 8:57 AM, 정낙정(JEONG NAK JEONG): @배병민 (Bae Byoungmin) 화성 현시간부로 S파레트 이용하여 생산 진행으로 AGV S pallet로 변경 부탁드립니다
March 25, 2025 at 9:01 AM, 노영일 (Yeongil Noh): @유경호(RYU KYEONGHO) 이거 대응해주세요
March 25, 2025 at 9:18 AM, 양원석: @박태영 화성 생산 파레트 변경은 박태영pm님께 요청부탁드립니다.
March 25, 2025 at 9:22 AM, 노영일 (Yeongil Noh): @박태영 피엠님 완료되면 여기에 공유 부탁 드립니다

Chunk 612:
March 25, 2025 at 9:29 AM, 박태영: 네 수정하고 말씀드리겠습니다
March 25, 2025 at 9:31 AM, 박태영: 완료되었습니다
March 25, 2025 at 9:31 AM, 박태영: 진행해보시죠
March 25, 2025 at 9:33 AM, 노영일 (Yeongil Noh): @원승연(Seungyeon Won) 오토로 두고 파레트 불러보고 s 잘 오는지 확인해주세요
March 25, 2025 at 9:35 AM, 원승연(Seungyeon Won): 알겠습니다
March 25, 2025 at 9:53 AM, 원승연(Seungyeon Won): S 파레트 투입 완료되었습니다. 설비 진행하겠습니다
March 25, 2025 at 9:53 AM, 박태영: 포장기에 T 안들어가죠?
March 25, 2025 at 9:54 AM, 박태영: 인터락으로 RTD에서 투입 제외하려고 합니다

Chunk 613:
March 25, 2025 at 10:03 AM, 원승연(Seungyeon Won): 아직 Packing에 4파레트만 투입되었는데, 전부 S입니다. T 안들어오게 인터락 필요합니다
March 25, 2025 at 10:11 AM, SKOH2/제조-셀,모듈 출하/김병호: 남측 셀 도크장 GF에서 out lift 알람발생하여 정지 상태입니다. 금일 출하작업 진행중이어서 빠른 확인 부탁드립니다
March 25, 2025 at 10:12 AM, SKOH2/제조-셀,모듈 출하/김병호: An out lift alarm has occurred at the South Cell Dock GF and is in a stationary state. We are in the process of shipment today, so please check it quickly

Chunk 614:
March 25, 2025 at 10:16 AM, Csepi Árpád: “Can I request a more precise location for the error correction?”
March 25, 2025 at 10:17 AM, SKOH2/제조-셀,모듈 출하/김병호: South Cell Dock, GF!
March 25, 2025 at 10:19 AM, Csepi Árpád: Okay
March 25, 2025 at 10:21 AM, SKOH2/제조-셀,모듈 출하/김병호 invited Tóth Gyula.
March 25, 2025 at 10:22 AM, SKOH2/제조-셀,모듈 출하/김병호 invited Szabolcs.
March 25, 2025 at 10:23 AM, SKOH2/제조-셀,모듈 출하/김병호 invited Farkas Misi.

Chunk 615:
March 25, 2025 at 10:23 AM, Csepi Árpád: A “A hiba javítva!” angol fordítása: “The error has been corrected!”
March 25, 2025 at 10:24 AM, Csepi Árpád: “The error has been corrected!”
March 25, 2025 at 10:29 AM, 배병민 (Bae Byoungmin): 박스 해체기 자동모드 시작하겠습니다.
March 25, 2025 at 11:35 AM, SKOH2/제조-셀,모듈 출하/김병호: An out lift alarm has occurred at the South Cell Dock GF and is in a stationary state. We are in the process of shipment today, so please check it quickly

Chunk 616:
March 25, 2025 at 11:36 AM, SKOH2/제조-셀,모듈 출하/김병호: 남측 셀 도크장 GF에서 out lift 알람발생하여 정지 상태입니다. 동일현상이 계속 발생하여 출하 작업이 지연 되고있습니다. 빠른 확인 부탁드립니다
March 25, 2025 at 11:46 AM, Csepi Árpád: Solved
March 25, 2025 at 12:41 PM, Gebri Ákos/SL/A: Hi ! The 16.th agv has a bit .please restart
March 25, 2025 at 12:41 PM, Gebri Ákos/SL/A: Thank u
March 25, 2025 at 12:42 PM, FA/CS/AGV/Taimur: Done. Thanks

Chunk 617:
March 25, 2025 at 1:13 PM, Tóth Gyula: MOCNV036 M02 Megállt a cella kiadás, kèrlek nèzzetek nèzzetek rá! Köszönöm szépen.
March 25, 2025 at 1:30 PM, Csepi Árpád: Solved
March 25, 2025 at 3:02 PM, 유경호(RYU KYEONGHO): formation, elevator#13 누수 심하게 발생 중입니다.
March 25, 2025 at 3:05 PM, 이태기 (Taeki Lee): 무슨일이에요?
March 25, 2025 at 3:05 PM, KIM SEYEON [김세연]_FA: 이반차에 비가 아주 많이 오고 있습니다.

Chunk 618:
March 25, 2025 at 4:28 PM, 배병민 (Bae Byoungmin): @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) 금일 박스해체기 테스트 진행사항 공유드립니다. 완제품 창고>해체기>셀버퍼창고까지 정상 투입되었으며, MES《》PLC 추가 구성이 필요부분 정리하여 메일 공유드리겠습니다. - 총 반송 수량 : 12PLT - PLT ID Z253119 Z253120 Z253149 Z253150 Z253153 Z253154 Z253155 Z253156 Z253157 Z253158 Z253159 Z253160

Chunk 619:
March 25, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 6+5/11(+1) Tech, 1Sl Overtime(5): Novák Zoltán, Novák Károly, Kasztel Balázs, Zsurbej Zsolt, Nagy Zsolt Holiday(5+1): Czeilinger Krisztián, Gerbovits Kevin, Kovács Ágnes, Pálosi Róbert,Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Kasztel Balázs --------------- Assy GF (3): Novák Zoltán, Novák Károly, Pintye Miklós --------------- Assy 1F (3): Böröczki Balázs, Zsurbej Zsolt, Nagy Zsolt --------------- Form

Chunk 620:
March 25, 2025 at 6:25 PM, Horváth László SL/B: Hello everyone, Please come to the EOL 5 line. The #8 AGV has a “Work Data Mismatch” error. Please check it. Thank you.
March 25, 2025 at 6:26 PM, Boromisza Zoltán: Okey
March 25, 2025 at 6:37 PM, Boromisza Zoltán: Kész Solved
March 25, 2025 at 7:15 PM, Horváth László SL/B: This message was deleted.
March 25, 2025 at 7:16 PM, Horváth László SL/B: Please check the CellBuffer #2. It has a “Pallet Direction Warning” error. Thank you.

Chunk 621:
March 25, 2025 at 7:23 PM, Denkó Jani (F.A.): Solved
March 25, 2025 at 11:34 PM, Horváth László SL/B: A 8# as AGV útban van, kérlek vigyétek arréb . @Denkó Jani (F.A.) @Boromisza Zoltán
March 26, 2025 at 2:02 AM, Vadász Dóra SSL/B: Sziasztok! #16-os agv hibajelzés hangot ad és leállt egy kietlen részen, de hibaüzenet nincs, buzzer/reset nem oldja meg. Nézzétek meg kérlek! Köszönöm
March 26, 2025 at 2:02 AM, Denkó Jani (F.A.): Úton a help
March 26, 2025 at 2:04 AM, Muneeb Ur Rehman: Fixed

Chunk 622:
March 26, 2025 at 6:08 AM, Sási Zsolt SL/C/ EOL: Sziasztok. Gyertek kérlek a boxpackingre. Oldalsó burkolatot nem fogta meg az átrakó. Köszönöm
March 26, 2025 at 6:09 AM, Zoltán Harasztia FA: Még elektródán vagyunk, hamarosan ott leszünk
March 26, 2025 at 6:09 AM, Sási Zsolt SL/C/ EOL: Köszi
March 26, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.26 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong

Chunk 623:
March 26, 2025 at 7:57 AM, FACS_JaewonShin: 26th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 26, 2025 at 8:40 AM, Sási Zsolt SL/C/ EOL: Sziasztok. Boxpackingra tudnátok jönni. A Pántolóval van probléma

Chunk 624:
March 26, 2025 at 8:46 AM, 배병민 (Bae Byoungmin): @FACS_JaewonShin 신팀장님 주간 박스포장기 생산시 기구 1명/제어 1명 대응 및 모니터링 부탁드립니다. 사소한것이라도 설비적 오류 사항등은 꼭 체크하여 저랑 같이 확인하고 근본 원인을 클리어하는것으로 하겠습니다.
March 26, 2025 at 8:47 AM, FACS_JaewonShin: 알겠습니다
March 26, 2025 at 8:51 AM, Zoltán Harasztia FA: Kész
March 26, 2025 at 8:52 AM, Sási Zsolt SL/C/ EOL: Köszönjük

Chunk 625:
March 26, 2025 at 10:10 AM, SKOH2/제조-셀,모듈 출하/김병호: An out lift alarm has occurred at the South Cell Dock GF and is in a stationary state. We are in the process of shipment today, so please check it quickly
March 26, 2025 at 10:11 AM, SKOH2/제조-셀,모듈 출하/김병호: 남측 셀 도크장 GF에서 out lift 알람발생하여 정지 상태입니다. 동일현상이 계속 발생하여 출하 작업이 지연 되고있습니다. 빠른 확인 부탁드립니다
March 26, 2025 at 10:29 AM, SKOH2/제조-셀,모듈 출하/김병호: This message was deleted.
March 26, 2025 at 10:29 AM, SKOH2/제조-셀,모듈 출하/김병호: 출하 작업 진행중입니다. 남쪽 셀 도크장 빠른확인 부탁드립니다

Chunk 626:
March 26, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호: Shipment is in progress. Please check the south cell dock quickly.
March 26, 2025 at 10:32 AM, SKOH2/제조-셀,모듈 출하/김병호 invited 애니.
March 26, 2025 at 10:45 AM, SKOH2/제조-셀,모듈 출하/김병호: @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 안녕하세요 PM님 금일 포드 셀 출하 작업 진행중 남측 셀 도크장 GF 리프트가 정지 되어 셀 배출이 안되어 40분 넘게 대기중입니다. 해당 구간에 계속 알람이 지속적으로 발생하고 있어 출하 작업이 지연되고 있으므로 확인 부틱드립니다.
March 26, 2025 at 10:50 AM, 배병민 (Bae Byoungmin): 네 알겠습니다

Chunk 627:
March 26, 2025 at 11:24 AM, FACS_TaehyeongJin: 조치완료 되었습니다
March 26, 2025 at 11:42 AM, 배병민 (Bae Byoungmin): @유경호(RYU KYEONGHO) PM님 박스 포장기 가동을 주간에 생산을 많이 할수 없을까요? 모니터링을 하면서 문제되는 부분을 빨리 클리어할려고 합니다.
March 26, 2025 at 11:47 AM, 정낙정(JEONG NAK JEONG): 일단 지금 있는 것들 모두 박스포장기 쪽으로 보내겠습니다. 주간생산분은 제가 확인해서 계속 포장 할 수 있도록 하겠습니다.
March 26, 2025 at 11:47 AM, 배병민 (Bae Byoungmin): 네 감사합니다

Chunk 628:
March 26, 2025 at 12:14 PM, Sási Zsolt SL/C/ EOL: Sziasztok. Nézzétek meg légyszíves a boxpackingon az első pantológépet. Nem pántolja a palettát. Köszönöm
March 26, 2025 at 1:29 PM, Sási Zsolt SL/C/ EOL: Sziasztok. A 16os AGV riaszt, mivel előtte van egy AGV ami aramtalanitva van. Meg tudnátok nézni? Köszönöm
March 26, 2025 at 3:15 PM, Sási Zsolt SL/C/ EOL: Ugyanez a probléma
March 26, 2025 at 3:17 PM, Sarvajcz Ferenc FA: Ránezek, agv ott

Chunk 629:
March 26, 2025 at 3:20 PM, Sarvajcz Ferenc FA: A testvérekkel megoldottuk.
March 26, 2025 at 5:38 PM, Sási Zsolt SL/C/ EOL: Sziasztok. 2 cell buffer megallt. Légyszíves nézzétek meg
March 26, 2025 at 5:44 PM, Döme György F.A: Kész
March 26, 2025 at 6:06 PM, Őri Imre: Sziasztok! Modul 1 Line végén nem viszi el az AGV a teli dunnaget! Kérnék segítséget! Köszönöm!

Chunk 630:
March 26, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 26, 2025 at 6:14 PM, Halász György SL: Hi, Modul GF line1 modul unloading AGV error. Thanks
March 26, 2025 at 6:15 PM, Muneeb Ur Rehman: On my way

Chunk 631:
March 26, 2025 at 6:18 PM, Muneeb Ur Rehman: Fixed
March 26, 2025 at 6:53 PM, Őri Imre: Ismét 1 Line kér segítséget! Nem jött BMA a raktárból! Kb. 50 perce lekértük! Légyszíves nézzétek meg! Köszönöm!
March 26, 2025 at 7:24 PM, Kurkó Péter: This message was deleted.
March 26, 2025 at 9:34 PM, Czébely Dániel SL—D: Hali tudnátok jönni a Box packinghoz ?
March 26, 2025 at 9:34 PM, Czébely Dániel SL—D: @N.Gábor F.A.

Chunk 632:
March 26, 2025 at 10:56 PM, Szijjártó Balázs: Line 1 Dunnage betöltésre kérnék segítséget!
March 26, 2025 at 10:56 PM, Szijjártó Balázs: Modulra
March 26, 2025 at 10:59 PM, Muneeb Ur Rehman: Coming
March 26, 2025 at 11:02 PM, Halász György SL: Hi, Modul GF line4 modul LWR case AGV error. Thanks
March 26, 2025 at 11:57 PM, 방혁 PM(Bang.Hyuk) FA: 오늘 제조담당분 계신가요
March 27, 2025 at 12:15 AM, 방혁 PM(Bang.Hyuk) FA: This message was deleted.

Chunk 633:
March 27, 2025 at 12:16 AM, 방혁 PM(Bang.Hyuk) FA: 공정 이슈발생 장소 : 모듈 장비:박스포장기 내용: 박스포장기 박스 그랩핑중 그래퍼와 화물간 충돌 발생 피해현황 : 박스포장기 박스 그래퍼 파손 가동현황 : 박스 포장기 비가동(2025.03.26 21:34~ 진행중) 정비내역 및 계획 : 스페어파츠 재고 없음으로 인한 정비 불가, 스페어파츠 수배후 오전에 정비예정
March 27, 2025 at 12:19 AM, Halász György SL: Hi, Modul GF line4 modul LWR case AGV error. Raw material AGV error. Thanks
March 27, 2025 at 12:23 AM, Muneeb Ur Rehman: On my way
March 27, 2025 at 12:26 AM, Muneeb Ur Rehman: Fixed

Chunk 634:
March 27, 2025 at 12:35 AM, Muneeb Ur Rehman: Agv 1 has a job from a port which is OOS. Please check. @FA
March 27, 2025 at 12:44 AM, VK (mcs): @FA Please check 4th line module assembly port 18 is OoS. There is a transfer command.
March 27, 2025 at 1:02 AM, Éváné Bori Viktória: Sziasztok! GF buffer 2. C/V pallet backlash detect ( stop sensor off) error hibára állt ki.
March 27, 2025 at 1:05 AM, F.A.Balazs: Megyünk

Chunk 635:
March 27, 2025 at 1:05 AM, 심정민 (Shim Jungmin): @방혁 PM(Bang.Hyuk) FA @배병민 (Bae Byoungmin) 화성 재고 확인해봤는데 화성엔 재고없네요 해체기에 대체 되는 실린더 있으면 그거라도 탈거해서 사용해야 할것 같은데, 해체기 쪽 설비에 동일 실린더 없나요?
March 27, 2025 at 1:14 AM, Dániel Hufnágel: Sziasztok! Ma este a csomagoló gép használaton kivül lesz, alkatrész hiány miatt! Szíves megértést kérünk, nappalosban megpróbálnak majd szerezni pót alkatrészt, kérek mindenkit, hogy addig ne is akarják használni a gépet! Köszönöm

Chunk 636:
March 27, 2025 at 1:54 AM, Halász György SL: Sziasztok, Modul line4 segítséget kérünk AGV indításhoz Köszönjük
March 27, 2025 at 1:55 AM, Muneeb Ur Rehman: Okay sure
March 27, 2025 at 2:09 AM, Muneeb Ur Rehman: Hi @ACS all. Please delete the job for AGV 1 at 3-4 raw material line. As this AGV has a job of a OOS port and it’s getting drained now. Please delete the job so that it can go for charging or other tasks.

Chunk 637:
March 27, 2025 at 3:11 AM, Czébely Dániel SL—D: Hello, buffer 2 is not working, please check.
March 27, 2025 at 5:32 AM, 방혁 PM(Bang.Hyuk) FA: 저희쪽도 재고 확인이 안되고 호환되는 부품을 찾을수가 없어, 주간조로 인수인계하여 부품 수배후 점검가능하도록 하겠습니다...
March 27, 2025 at 5:38 AM, Éváné Bori Viktória: Sziasztok! Az EOL 5-6 - nál az AGV nem hoznak üres palettát kérlek nézzétek meg!!!!

Chunk 638:
March 27, 2025 at 5:58 AM, Sási Zsolt SL/C/ EOL: Jo reggelt. Jelenleg az EOL soron manuálisan töltjük a palettákat, mert nem hozza az AGV. Megtudnátok nézni a problémát?
March 27, 2025 at 5:58 AM, Zoltán Harasztia FA: Most indulunk modulról, amint át érünk megyünk
March 27, 2025 at 6:00 AM, Zoltán Harasztia FA: * elektródáról
March 27, 2025 at 6:02 AM, 원승연(Seungyeon Won): M0STK013 check plz, stacker crane stop

Chunk 639:
March 27, 2025 at 6:32 AM, Zoltán Harasztia FA: @mcs Hi, could you check why the material T701822 on M0STK011 has no destination?
March 27, 2025 at 6:33 AM, Zoltán Harasztia FA: Stk013
March 27, 2025 at 6:35 AM, Shakir (MCS): The Job has been aborted by OP action at 5:03.
March 27, 2025 at 6:36 AM, Zoltán Harasztia FA: Then please issue a command to return it to the warehouse.
March 27, 2025 at 6:37 AM, Shakir (MCS): Alright, working on it

Chunk 640:
March 27, 2025 at 6:40 AM, Shakir (MCS): The job destination is M0STK013_M01, should I give a command to its original its destination?
March 27, 2025 at 6:41 AM, Zoltán Harasztia FA: No need, just place it back on an empty warehouse shelf.
March 27, 2025 at 6:55 AM, Zoltán Harasztia FA: Thank you for your help.
March 27, 2025 at 6:56 AM, Shakir (MCS): The Job has been completed successfully ✅ Thank you
March 27, 2025 at 6:56 AM, Shakir (MCS): You’re welcome

Chunk 641:
March 27, 2025 at 7:58 AM, FACS_JaewonShin: 27th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 27, 2025 at 8:07 AM, 이태기 (Taeki Lee): 박스포장기 비가동으로 생산/출하 일정에 차질이 생기는지 확인바랍니다 @노영일 (Yeongil Noh)
March 27, 2025 at 8:20 AM, 노영일 (Yeongil Noh): 네 알겠습니다

Chunk 642:
March 27, 2025 at 8:27 AM, 배병민 (Bae Byoungmin): 생산에 불편을 드려죄송합니다. 박스포장기는 1시간 내로 리커버리 가능수준이며, 충돌로인한 부품파손은 없으며 실린더 브라켓이 살짝 휨정도로 복구 가능 수준입니다. 충돌 원인으로는 Side cover T축에서 그립/턴 이후 Side cover 네모서리 얼라인 에러발생 후 조그동작으로 하강하다가 T축 구조물과 T/R 스트레치 실린더와 간섭된 부분입니다. 복구이후 재공유 드리겠습니다.
March 27, 2025 at 10:15 AM, 배병민 (Bae Byoungmin): 박스포장기 재가동 시작하였습니다
March 27, 2025 at 10:29 AM, 배병민 (Bae Byoungmin): 박스포장기 오퍼레이터 부탁드립니다
March 27, 2025 at 10:30 AM, 조보행(CHO BO HAENG): 배정 시켰습니다 곧 이동할겁니다

Chunk 643:
March 27, 2025 at 10:32 AM, 배병민 (Bae Byoungmin): 넵 감사합니다
March 27, 2025 at 10:43 AM, Herceg Sándor SSL/C: Can you clear the area before EOL 3-4? - AGV We need to get the pallets out of here
March 27, 2025 at 10:44 AM, Duna Don: On the way
March 27, 2025 at 10:44 AM, FA/CS/AGV/Taimur: Sure, coming
March 27, 2025 at 10:46 AM, SKOH2/제조-셀,모듈 출하/김병호: @FACS@@FA Technician 남쪽 셀 출하 도크 GF 아웃리프트 전단 M0CNV036_RTV01 정지상태입니다. 출하작업 진행중이라 빠른 확인 부탁드립니다

Chunk 644:
March 27, 2025 at 10:48 AM, SKOH2/제조-셀,모듈 출하/김병호: @FACS @ @FA Technician South Cell Shipment Dock GF Outlift Shear M0CNV036_RTV01 Please check
March 27, 2025 at 10:48 AM, FACS_JaewonShin: @FA technician Alarm location : M0CNV036_RTV Alarm name : rtv car stopper down error
March 27, 2025 at 10:49 AM, FACS_JaewonShin: Please check parameter status. I will go too
March 27, 2025 at 10:50 AM, FA/CS/AGV/Taimur: Done.
March 27, 2025 at 10:50 AM, FACS_Hyeongi Son: Megoldva

Chunk 645:
March 27, 2025 at 10:51 AM, Herceg Sándor SSL/C: Thank you!
March 27, 2025 at 10:57 AM, FACS_JaewonShin: 조치완료하였습니다
March 27, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs

Chunk 646:
March 27, 2025 at 6:16 PM, Czébely Dániel SL—D: @Dávid F.A. Sziasztok az 1-es buffer nem üzemel rá tudnátok nézni?
March 27, 2025 at 6:16 PM, Czébely Dániel SL—D: Formázás modul közti raktár .
March 27, 2025 at 6:58 PM, Czébely Dániel SL—D: Hellóka a buffer 1 ugyan arra a hibára ált kJ csak most a 2-es daru jelez.
March 27, 2025 at 6:58 PM, Czébely Dániel SL—D: @Dávid F.A.
March 27, 2025 at 7:01 PM, Kurkó Péter: Helló Modul 4line egyes block melletti 3. port nem működik valaki nézze meg köszi

Chunk 647:
March 27, 2025 at 7:17 PM, 배병민 (Bae Byoungmin): Pallet The barcode has detected the sensor. It was resolved.
March 27, 2025 at 10:48 PM, Szijjártó Balázs: Modul Line4 small AGV (#2): "ACS live alarm" We need help!Thanks!
March 27, 2025 at 10:48 PM, FA CS AGV David 데이비드: Ok coming
March 27, 2025 at 10:57 PM, FA CS AGV David 데이비드: Resolved
March 27, 2025 at 11:27 PM, Czébely Dániel SL—D: @Dávid F.A. Hellóka tudnátok jönni a box packinghoz vákum hiba van. Köszi

Chunk 648:
March 28, 2025 at 2:16 AM, FA CS AGV David 데이비드: @Dávid F.A. Can someone please check the left crane at the North Cell buffer. It seems to be stuck but there's no error alarm
March 28, 2025 at 2:21 AM, Éváné Bori Viktória: Sziasztok! Nem hozzák az AGV- k a palettákat át EOL 5-6 - ra. SOS gyertek
March 28, 2025 at 2:22 AM, FA CS AGV David 데이비드: @Shahbaz 샤바즈 MCS/RTD is there a load request?
March 28, 2025 at 2:24 AM, Shahbaz 샤바즈 MCS/RTD: There are currently jobs for eol 5/6 line

Chunk 649:
March 28, 2025 at 2:25 AM, FA CS AGV David 데이비드: Thank you
March 28, 2025 at 2:29 AM, Shahbaz 샤바즈 MCS/RTD: @FA S100873 to EOL #5 is not moving from M0STK011_P11 for long time. Please check. Thank you
March 28, 2025 at 2:29 AM, FA CS AGV David 데이비드: They're checking
March 28, 2025 at 4:21 AM, 최준영(JoonYoung Choi): 화성 박스포장기 작업을 위해 MES출고 진행 하였지만 Buffer 배출C/V(Port#2707, 2705, 2704)로 파레트 배출이 안되고 있습니다. 현제 박스 포장기 비가동 중이므로 확인 부탁 드리겠습니다. EOL Buffer STK, AGV 모두 정상 가동 중입니다. @방혁 PM(Bang.Hyuk) FA

Chunk 650:
March 28, 2025 at 4:44 AM, 최준영(JoonYoung Choi): 크레인 모두 정상 가동 중이므로 작업 명령 상태 확인 부탁 드리겠습니다.

Chunk 651:
March 28, 2025 at 6:32 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 13 Technician, 1 Sl, 4 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 652:
March 28, 2025 at 7:35 AM, Tklcz Alexandra SL/A: Sziasztok! EOL.on AGV 16 útban van, kérlek küldjétek arrébb.
March 28, 2025 at 7:36 AM, FA CS AGV Jawad: OMW
March 28, 2025 at 7:50 AM, Zoltán Harasztia FA: @mcs Can you check why no material is being delivered to the F0BPM011 machine? According to MCS, there is a material (S100779) on F0BPM011 P02, but the line is actually empty.
March 28, 2025 at 7:51 AM, Mohammad Amir: Checking

Chunk 653:
March 28, 2025 at 7:52 AM, Mohammad Amir: Please confirm, Is there no material actually exists on F0BPM011_P02? Thank you very much!
March 28, 2025 at 7:52 AM, FACS_JaewonShin: 28th march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon - mechanic 3 Lee yeongmin Son hyeongi Oh changhoon - plc control 2 Jin taehyeong Jin jaejeong
March 28, 2025 at 7:52 AM, Zoltán Harasztia FA: Yes, the port is empty.

Chunk 654:
March 28, 2025 at 7:53 AM, Mohammad Amir: Information has been updated successfully ✅ Checking Further. Thank you very much!
March 28, 2025 at 7:57 AM, Tklcz Alexandra SL/A: AGV16 hibán áll az EOL10nél. Kérlek nézzétek meg.
March 28, 2025 at 7:57 AM, FA CS AGV Jawad: I do
March 28, 2025 at 7:59 AM, Mohammad Amir: For Long Type F0BPM011_P01 ,there is an LR but material is not available . For Short Type F0BOM011_P02 , Please Press LR. Thank you very much!

Chunk 655:
March 28, 2025 at 8:07 AM, Mohammad Amir: For F0BPM011_P02 LR received successfully at 8:05 and Jobs are created . ✅ Thank you very much!
March 28, 2025 at 8:08 AM, Zoltán Harasztia FA: Thank you for your help.
March 28, 2025 at 8:08 AM, Mohammad Amir: You are welcome!
March 28, 2025 at 8:54 AM, Mohammad Amir: @Zoltán Harasztia FA Please check M0CNV023_34_027 there is Stop Detect error. Thank you very much!
March 28, 2025 at 8:57 AM, Zoltán Harasztia FA: Cheking

Chunk 656:
March 28, 2025 at 8:58 AM, Mohammad Amir: Thank you very much!
March 28, 2025 at 8:59 AM, Avacz Beáta: Sziasztok! Line 4 alsó burkolat gantryhez szükségünk lenne segítségre. Köszönöm.
March 28, 2025 at 9:14 AM, Tklcz Alexandra SL/A: Sziasztok! Kérünk karbantartót a boxpackinghez, gond van a nyomtatóval.
March 28, 2025 at 9:24 AM, Zoltán Harasztia FA: Kész
March 28, 2025 at 9:26 AM, Avacz Beáta: Köszi.

Chunk 657:
March 28, 2025 at 1:13 PM, Mohammad Amir: @FA @Zoltán Harasztia FA Please check M0CNV022_M01 there is Pallet Overhang Det Error. Thank you very much!
March 28, 2025 at 1:22 PM, Zoltán Harasztia FA: This error is caused by material overhanging when warehouse workers place the material into the manual loading port. They then adjust it and reset the error.
March 28, 2025 at 1:22 PM, Mohammad Amir: Thank you very much for the information!

Chunk 658:
March 28, 2025 at 3:59 PM, Szentirmai Z. A/SSL: @Brázik János @Csepi Árpád @Édl Tamás Cell buffer#1 - CRC C/V#8 C/V data miss match nothing error
March 28, 2025 at 3:59 PM, Szentirmai Z. A/SSL: Kérlek nézzetek rá. Köszi
March 28, 2025 at 4:32 PM, Tklcz Alexandra SL/A: Eol3 AGV 15 error.
March 28, 2025 at 4:32 PM, FA CS AGV Jawad: I check it

Chunk 659:
March 28, 2025 at 4:54 PM, FA CS AGV Jawad: Please check pallet S100952, it badly stuck in port, it was loaded and unloaded forcefuly on & off AGV. Now it is at EOL 5 inport.
March 28, 2025 at 4:54 PM, FA CS AGV Jawad: Probably it is broken
March 28, 2025 at 5:16 PM, Szentirmai Z. A/SSL: @FA CS AGV Jawad I need help with Box Packing! Thank you
March 28, 2025 at 5:17 PM, FA CS AGV Jawad: Coming
March 28, 2025 at 5:24 PM, Tklcz Alexandra SL/A: EOL AGV15 útban van, el tudnátok küldeni?

Chunk 660:
March 28, 2025 at 5:25 PM, FA CS AGV Jawad: Sure
March 28, 2025 at 5:25 PM, Tklcz Alexandra SL/A: Thanks!
March 28, 2025 at 5:25 PM, Szentirmai Z. A/SSL: Thank you

Chunk 661:
March 28, 2025 at 6:24 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 9+2/11(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(2+1): Pálosi Róbert, Kovács Ágnes, (+Radics András) Sick(0): --------------- Electrode3): Szabadi Miki, Kiss Balázs, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Denkó János --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztás

Chunk 662:
March 28, 2025 at 6:29 PM, Nikolett SL/B EOL: Sziasztok Boxpacking Minden palettánál kiáll erre a hibára SC 4_label Yservo error ( Code Reformance) Kérlek gyertek és nézzétek meg Köszönöm
March 28, 2025 at 6:35 PM, Gerbovits Kevin: Megyünk

Chunk 663:
March 29, 2025 at 6:10 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl ———————————— Electrode (3): Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 664:
March 29, 2025 at 6:26 AM, Tklcz Alexandra SL/A: Sziasztok! Karbantartást kérünk a boxpackinghoz, nem veszi fel a gép az oldalfalakat.
March 29, 2025 at 6:27 AM, Csepi Árpád: Megyünk
March 29, 2025 at 8:01 AM, 조보행(CHO BO HAENG): This message was deleted.

Chunk 665:
March 29, 2025 at 8:06 AM, 조보행(CHO BO HAENG): □ 공정 이상 발생 보고 □ 1. 모델/라인 - Box packing/Side cover투입부 2. 발생 현상 - Grip 알람 발생 212 사이드커버 리프트 상승 후 틸트 사이드 그립 진행시 사이드 그립 위치 이상으로 알람발생 3. 시간 - 공정이상발ї생 시간 : 06:20~ - 공정이상완료 시간 : - 보전시간(업체포함) : - 설비정지시간 : 4. 문제점 및 원인 - FA 테크니션 원인파악 진행중 5. 피해사항 - 박스포장 진행불가 6. 조치내용 @배병민 (Bae Byoungmin) @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) @방혁 PM(Bang.Hyuk) FA @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO)

Chunk 666:
March 29, 2025 at 10:47 AM, 조보행(CHO BO HAENG): □ 공정 이상 발생 완료 보고 □ 1. 모델/라인 - Box packing/Side cover투입부 2. 발생 현상 - Grip 알람 발생 212 사이드커버 리프트 상승 후 틸트 사이드 그립 진행시 사이드 그립 위치 이상으로 알람발생 3. 시간 - 공정이상발ї생 시간 : 06:20~ - 공정이상완료 시간 : 10:40 - 보전시간(업체포함) : - 설비정지시간 : 4H20M 4. 문제점 및 원인 - 사이드커버 NG로인한 에러발생 - 사이드커버 NG 인식없이 티칭값 조정 - 티칭원복 및 사이드커버 교체후 가동 - 배병민PM 통화대응조치 5. 피해사항 6. 조치내용 @배병민 (Bae Byoungmin) @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO)

Chunk 667:
March 29, 2025 at 10:56 AM, Tklcz Alexandra SL/A: Hi! Buffer 2 fire detect alarm.
March 29, 2025 at 11:00 AM, Tklcz Alexandra SL/A: EOL5 AGV buffer out stage light curtain error.
March 29, 2025 at 11:39 AM, Szentirmai Z. A/SSL: Ellenőrízve, tűz, füst vagy más tűzre utaló jel nincsen
March 29, 2025 at 11:39 AM, Szentirmai Z. A/SSL: Tűzoltók keresik a belső oltórendszer központját a resethez

Chunk 668:
March 29, 2025 at 11:43 AM, Szentirmai Z. A/SSL: @Mr.Miti (미티) FA A tűzoktásvezető srgítséget kér a Cell Buffernél
March 29, 2025 at 11:45 AM, Mr.Miti (미티) FA: És miben szeretne segítséget kérni?
March 29, 2025 at 11:47 AM, Szentirmai Z. A/SSL: Keresik a cell buffer belső hő- és füstszenzorok központját
March 29, 2025 at 11:48 AM, Mr.Miti (미티) FA: Nah hat azt én sem tudom hol van de várja hátha van aki tudja
March 29, 2025 at 11:48 AM, Szentirmai Z. A/SSL: Köszi

Chunk 669:
March 29, 2025 at 12:09 PM, Szentirmai Z. A/SSL: @Mr.Miti (미티) FA A szenzor kommunikációs hibát jelez. Ki tudnátok iktatni?
March 29, 2025 at 12:10 PM, Mr.Miti (미티) FA: Nézem

Chunk 670:
March 29, 2025 at 12:29 PM, Szentirmai Z. A/SSL: Annnyit sikerült elérnem, hogy az aktuális rack-et inaktiváltam, így most már legalább az scs-ben nem ugrik vissza a hiba, viszont mivel a sensor monitoring programja még mindig kommunikácios hibát jelez a szenzorra, ezért hibanyugtázni zovábra sem tudjuk sem az scs-t, ez pedig folyamatosan, hibát generál a koiskban, amit szintén nem tudunk resetelni
March 29, 2025 at 12:30 PM, Mr.Miti (미티) FA: Jövök már de nem ígérek semmit

Chunk 671:
March 29, 2025 at 12:31 PM, Szentirmai Z. A/SSL: Kimegyek iszok egyet, aztán találkozzunk a cell bufferben
March 29, 2025 at 12:31 PM, Mr.Miti (미티) FA: Oles nyugodtan
March 29, 2025 at 12:55 PM, Sánta László: Hello! No cells are coming from cell buffer two to line three because it is not working yet. Can you redirect it if we receive cells from cell buffer four?
March 29, 2025 at 12:58 PM, Szentirmai Z. A/SSL: @FA CS AGV Jawad
March 29, 2025 at 12:59 PM, FA CS AGV Jawad: @Mohammad Amir

Chunk 672:
March 29, 2025 at 1:00 PM, Mohammad Amir: Checking
March 29, 2025 at 1:00 PM, Szentirmai Z. A/SSL: Sorry, thank you 😉
March 29, 2025 at 1:00 PM, Sánta László: The cells don't even arrive in line 4.
March 29, 2025 at 1:01 PM, Mohammad Amir: Please write the Equipment id. Thank you very much!
March 29, 2025 at 1:03 PM, Magosi Erik: M3MFA300 and M4MFA300
March 29, 2025 at 1:04 PM, Sánta László: @Magosi Erik Thank you

Chunk 673:
March 29, 2025 at 1:17 PM, Mohammad Amir: @FA @Csepi Árpád Please check Carrier T703934 located at M0STK011(0200503) it has job to go to line -3_P01. Everything is good from MCS side ✅, please check why it is not moving. There is path available for it to go to module line -3 using path M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M3MFA300. Thank you very much!

Chunk 674:
March 29, 2025 at 1:26 PM, Mohammad Amir: @SCS Please check this issue it is blocking materials transfer to line -3 and Line-4. Thank you very much!
March 29, 2025 at 1:36 PM, Sánta László: I know they are working on fixing the error, but the information that the lines have started to stop due to a lack of cells is just an indication.

Chunk 675:
March 29, 2025 at 1:43 PM, 배병민 (Bae Byoungmin): @조보행(CHO BO HAENG) 셀버퍼창고#2 천장에서 누수가 발생되어 Rack에 설치된 열연감지센서 오작동의 원인입니다. 확인 사항으로는 누수로 인해 상부 적재되어있는 주변 팔레트에도 물이 고여 있어 수동 출고후 Cell 확인 및 물기제거가 필요한 상황입니다. 유틸팀에게는 연락하여 조치 요청한 상황입니다
March 29, 2025 at 1:46 PM, 조보행(CHO BO HAENG): 주변 파렛트 모두 출고해 주세요 확인하겠습니다 @한상범(Han Sang Beom) @Szentirmai Z. A/SSL
March 29, 2025 at 1:47 PM, 노영일 (Yeongil Noh): 해당구역 주변 파레트는 박스포장 잠시 중단하고 확인 부탁 드립니다
March 29, 2025 at 1:48 PM, 조보행(CHO BO HAENG): 네 알겠습니다

Chunk 676:
March 29, 2025 at 1:49 PM, Mohammad Amir: @Csepi Árpád Could you please check M0STK011_P13 port. Thank you very much!
March 29, 2025 at 1:52 PM, Mr.Miti (미티) FA: @Mohammad Amir please delete Jobs from M0STK012
March 29, 2025 at 1:53 PM, Mr.Miti (미티) FA: All
March 29, 2025 at 1:53 PM, Mr.Miti (미티) FA: Please
March 29, 2025 at 1:55 PM, Szentirmai Z. A/SSL: I upload the pictures of the leaks, then I collect the list of pallets next to and under the rack.

Chunk 677:
March 29, 2025 at 1:56 PM, Mohammad Amir: I have cancelled the jobs where carriers were inside the STK012. But there are three jobs for which carriers have came out of STK012 and theses carriers currently located at M0STK012_P06,M0STK012_P09,P10. What should I do with these jobs ?
March 29, 2025 at 1:58 PM, Mr.Miti (미티) FA: Delete áll
March 29, 2025 at 1:58 PM, Mr.Miti (미티) FA: Thank you!
March 29, 2025 at 1:58 PM, Mohammad Amir: Alright, Thank you very much!

Chunk 678:
March 29, 2025 at 2:00 PM, Magosi Erik invited 윤성제(Yoon SungJe).
March 29, 2025 at 2:02 PM, Tklcz Alexandra SL/A: Hi! AGV does not bring a palette to EOL6, please see why. The PLC opposite EOL5 is flashing.
March 29, 2025 at 2:02 PM, Mohammad Amir: I have cancelled all the jobs. For two Jobs T703901 and T700606 for these jobs abort is getting failed. @SCS please delete these two jobs from CIM side. Thank you very much!

Chunk 679:
March 29, 2025 at 2:07 PM, Mohammad Amir: For EOL6 carrier S101046 is on the way. ✅ It is currently in M0STK013_C01. Thank you very much!
March 29, 2025 at 2:09 PM, Tklcz Alexandra SL/A: Okay, but CV Data mismatch error on PLC.
March 29, 2025 at 2:10 PM, Mohammad Amir: @FA please check this issue. Thank you very much!
March 29, 2025 at 2:10 PM, Mohammad Amir: AGV#16 has been assigned ✅.

Chunk 680:
March 29, 2025 at 2:11 PM, Mr.Miti (미티) FA: @Mohammad Amir Is it possible to serve the module rows not from warehouse 12 but from warehouses 13-14?
March 29, 2025 at 2:11 PM, Szentirmai Z. A/SSL: Sensor fault location: 0201113 T701612 Palettes next to the location: Z300112; Z300174 Pallet under location: Z300113
March 29, 2025 at 2:12 PM, 조보행(CHO BO HAENG): Check if everyone is wet.

Chunk 681:
March 29, 2025 at 2:14 PM, Mohammad Amir: All the Jobs which are currently active are from M0STK011 for module line 3 and 4. And there is path :- M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M3MFA300. So it will just use STK13 and STK14 ,it will not use STK12 as now STK12 is OOS and this Path is unavailable. Thank you very much!
March 29, 2025 at 2:14 PM, 박태영: Please check if the destination of the deleted job will create a return in the future.

Chunk 682:
March 29, 2025 at 2:14 PM, Szentirmai Z. A/SSL: Currently the cell buffer#2 system is not active. As soon as the system is activated, the palettes are releas.
March 29, 2025 at 2:15 PM, Mohammad Amir: Checking Sir!
March 29, 2025 at 2:18 PM, Szentirmai Z. A/SSL: The utility checks the area above the leakage on the second floor
March 29, 2025 at 2:18 PM, Hmyang(Hungary): Hi Amir, pls hand over to the night shift about the situation carefully unless they will clear then. Thx

Chunk 683:
March 29, 2025 at 2:19 PM, Mohammad Amir: Okay Sir , Noted! Thank you very much!
March 29, 2025 at 2:22 PM, Mohammad Amir: Sir, I have cancelled two jobs as per request form operations. It should not create return for deleted jobs as long as STK12 is OOS. We are monitoring the situation as well. Thank you very much!
March 29, 2025 at 2:33 PM, Mohammad Amir: @Mr.Miti (미티) FA Could you please check M0STK011_P13 port make it out. Thank you very much!

Chunk 684:
March 29, 2025 at 2:34 PM, Mohammad Amir: Issue has been resolved. Material delivery to Module line 3 and Line -4 has been normalised ✅ Monitoring the process. Thank you very much!
March 29, 2025 at 2:34 PM, Mr.Miti (미티) FA: Good! @Csepi Árpád Thank you too!
March 29, 2025 at 2:34 PM, Mohammad Amir: Materials for Line 3 :- Will arrive this Path :- M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M3MFA300.
March 29, 2025 at 2:35 PM, Magosi Erik: Thank You everyone!

Chunk 685:
March 29, 2025 at 2:35 PM, Mohammad Amir: Materials for Line 4:- Will arrive this Path :- M0STK011- M0VNV011-M0STK013-M0STK014-M0MGV012-M4MFA300.
March 29, 2025 at 2:35 PM, Mohammad Amir: You are welcome!
March 29, 2025 at 2:51 PM, Csepi Árpád: Solved

Chunk 686:
March 29, 2025 at 2:57 PM, Mohammad Amir: Sir, Update:- For Carrier T700606 ,it is located at M0STK012_P09 for this job after cancellation from MCS side ,recovery jobs are getting created with destination STK012_Z01. Also same for T7030901 located at M0STK012_P06 for this job as well after cancellation from MCS side ,recovery jobs are getting created with destination STK012_Z01. Both these carriers has destination for Line-4 before cancellation. Thank you very much!

Chunk 687:
March 29, 2025 at 2:59 PM, Mohammad Amir: These jobs will not move as STK012 currently OOS. Thank you very much!
March 29, 2025 at 3:08 PM, Szentirmai Z. A/SSL: On the second floor, we found the leak. Utility prevents further infiltration, but what the panels above the cell buffer have absorbed will still drip into the cell buffer.
March 29, 2025 at 3:18 PM, Tklcz Alexandra SL/A: EOL AGV13 error.
March 29, 2025 at 3:18 PM, FA CS AGV Jawad: I check it

Chunk 688:
March 29, 2025 at 3:21 PM, FA CS AGV Jawad: Solved
March 29, 2025 at 3:26 PM, Szentirmai Z. A/SSL: @Mr.Miti (미티) FA Kérlek a képeket küld majd át és köszönöm a segítséget!
March 29, 2025 at 3:27 PM, Mr.Miti (미티) FA: Mindenképp amint vissza értem! Én is köszönöm a segítséget! 🙏
March 29, 2025 at 3:57 PM, Szentirmai Z. A/SSL: 😉
March 29, 2025 at 3:58 PM, Tklcz Alexandra SL/A: Hi! Can you help me to make AVG not take the palette from Buffer2 for boxpacking?

Chunk 689:
March 29, 2025 at 4:03 PM, Mohammad Amir: Hello, As i checked there is currently no jobs from Buffer 2 to Boxpacking. Last job was cancelled by me on the request of operation at 13:54. Thank you very much!
March 29, 2025 at 4:04 PM, Tklcz Alexandra SL/A: Okay. But the palettes should come from somewhere for boxpacking. So which buffer are you using now?
March 29, 2025 at 4:05 PM, Mohammad Amir: This message was deleted.

Chunk 690:
March 29, 2025 at 4:06 PM, Mohammad Amir: Please press LR in case you need materials ,Jobs should create Automatically from other in-service buffers. Thank you very much!
March 29, 2025 at 4:07 PM, Mr.Miti (미티) FA: @Szentirmai Z. A/SSL Elment a mail 😇
March 29, 2025 at 4:08 PM, Szentirmai Z. A/SSL: Köszönöm!
March 29, 2025 at 4:08 PM, Mr.Miti (미티) FA: Szovesen!
March 29, 2025 at 4:12 PM, Tklcz Alexandra SL/A: @Szentirmai Z. A/SSL

Chunk 691:
March 29, 2025 at 4:31 PM, Tklcz Alexandra SL/A: Which LR button? Where? The boxpacking is initialized and no palette comes up.
March 29, 2025 at 4:33 PM, Mohammad Amir: For Long Type F0BPM011_P01 ,there is an LR received at 16:14 but material is not available . For Short Type F0BOM011_P02 , there is an active LR received at 16:13 but unfortunately material is not available. Thank you very much!

Chunk 692:
March 29, 2025 at 5:26 PM, Szentirmai Z. A/SSL: I checked if there is a palette available, which is currently packed at the box packing. Please check so that we can produce. If I can help, let's talk in person.
March 29, 2025 at 5:27 PM, Mohammad Amir: Checking!
March 29, 2025 at 5:28 PM, Szentirmai Z. A/SSL: Thank you
March 29, 2025 at 5:31 PM, Szentirmai Z. A/SSL: Palettes are available in cell buffer#4

Chunk 693:
March 29, 2025 at 5:32 PM, Mohammad Amir: I checked again but unfortunately currently there is no transferable materials available in RTD for F0BPM011_P01/02. Thank you very much!
March 29, 2025 at 5:34 PM, Szentirmai Z. A/SSL: Okay, thank you!
March 29, 2025 at 5:35 PM, Mohammad Amir: You are welcome! We are monitoring as soon as material will be available jobs will started to create. Thank you very much for your understanding!

Chunk 694:
March 29, 2025 at 6:20 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 10+1/11(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(1+1): Pálosi Róbert (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Szabadi Miki, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Denkó János --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő

Chunk 695:
March 29, 2025 at 7:02 PM, 원승연(Seungyeon Won): @배병민 (Bae Byoungmin) 저희 1F 버퍼창고로 출고해서 검사진행하겠습니다. @Vadász Dóra SSL/B Forklift send to 1F Buffer
March 29, 2025 at 7:03 PM, 배병민 (Bae Byoungmin): 네 해당 팔레트 우선 1개 보내드릴께요
March 29, 2025 at 7:18 PM, 원승연(Seungyeon Won): 1F buffer 활성화 하겠습니다
March 29, 2025 at 7:19 PM, 원승연(Seungyeon Won): 스태커크레인 출고작업 시작했습니다
March 29, 2025 at 7:20 PM, 배병민 (Bae Byoungmin): 최상단 (13단) 팔레트 출고하였습니다
March 29, 2025 at 7:20 PM, 원승연(Seungyeon Won): 10,11,12 출고하면서 비사용 전환 하겠습니다

Chunk 696:
March 29, 2025 at 7:22 PM, 배병민 (Bae Byoungmin): 넵 직접 출고 진행하시는거죠?
March 29, 2025 at 7:35 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.29 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 29, 2025 at 8:00 PM, 원승연(Seungyeon Won): 네 출고 직접 하겠습니다. 에러 발생 시 대응만 요청하겠습니다
March 29, 2025 at 8:11 PM, FA CS AGV David 데이비드: @VK (mcs) please cancel the job for AGV 9 in cell buffer for STK012_P09

Chunk 697:
March 29, 2025 at 8:12 PM, VK (mcs): Please first cancel it from ACS then I will do it, thx
March 29, 2025 at 8:27 PM, 배병민 (Bae Byoungmin): Please move Pallet T00606 in port M0STK012_P09 to Cell buffer#2 0101806.
March 29, 2025 at 8:28 PM, 배병민 (Bae Byoungmin): @VK (mcs)
March 29, 2025 at 8:28 PM, VK (mcs): Checking
March 29, 2025 at 8:34 PM, VK (mcs): Carrier removed from that port. befor creating a job!

Chunk 698:
March 29, 2025 at 8:42 PM, 배병민 (Bae Byoungmin): The pallet in question is not being returned manually from SCS. Can you issue a return order from RTD?
March 29, 2025 at 8:44 PM, VK (mcs): Is it still in port 9? Because it was removed in MCS and port is empty now
March 29, 2025 at 8:46 PM, 배병민 (Bae Byoungmin): Yes, it's at port 09.
March 29, 2025 at 8:46 PM, VK (mcs): Okay, let me modify MCS and try it again

Chunk 699:
March 29, 2025 at 8:53 PM, VK (mcs): I tried to transfer it. but unfortunately, it doesn't work
March 29, 2025 at 9:04 PM, 배병민 (Bae Byoungmin): This was done by changing the return setting in SCS. The situation was that the return was not made because the BCR completion signal was not finished.
March 29, 2025 at 9:05 PM, VK (mcs): Thank you
March 29, 2025 at 9:06 PM, 배병민 (Bae Byoungmin): Everything is fine now, thank you.

Chunk 700:
March 29, 2025 at 9:43 PM, 원승연(Seungyeon Won): @배병민 (Bae Byoungmin) @노영일 (Yeongil Noh) Bank 2 Bay 10, 11, 12 출고 후 비사용 전환 완료했습니다.
March 29, 2025 at 10:12 PM, VK (mcs): FYI Carrier transferred from M4MFA300-P01 to M0STK012 -P09 by AGV 09 Rail- Transfer completed report received at 10:45:42 Transfer doesn't initiate due to transport job terminated by OP action at10:46:16! C/V inverter fault alarm was received at 12:48:53.

Chunk 701:
March 30, 2025 at 3:17 AM, 김지현(Ji Hyun KIM): AGV OP BOX Summer Time Synchronization is required. Is it possible?
March 30, 2025 at 3:19 AM, FA CS AGV David 데이비드: In what area?
March 30, 2025 at 3:23 AM, 원승연(Seungyeon Won): F1CPM010 ~ FCCPM010
March 30, 2025 at 3:25 AM, FA CS AGV David 데이비드: This message was deleted.
March 30, 2025 at 3:28 AM, 배병민 (Bae Byoungmin): 우선 섬머타임 이후 PLC단 시간동기화 부분은 전수 체크 하고 원인 확인 후 개선 예정입니다. 시간 동기화가 안된부분은 아직 변경하지 말아주세요

Chunk 702:
March 30, 2025 at 3:29 AM, 김지현(Ji Hyun KIM): 네 @원승연(Seungyeon Won)
March 30, 2025 at 3:29 AM, FA CS AGV David 데이비드: Okay
March 30, 2025 at 3:31 AM, 원승연(Seungyeon Won): 그럼 설비가동 시작하겠습니다
March 30, 2025 at 3:34 AM, 박태영: 전수 확인 후 자동으로 변경되지 않은 PLC 저희에게도 공유해주세요
March 30, 2025 at 3:36 AM, 배병민 (Bae Byoungmin): 네 공유드리겠습니다.
March 30, 2025 at 4:25 AM, 원승연(Seungyeon Won): AGV #10 Check plz We are waiting for pallet unloading for box packing.
March 30, 2025 at 4:27 AM, FA CS AGV David 데이비드: Checking

Chunk 703:
March 30, 2025 at 4:41 AM, 원승연(Seungyeon Won): 모듈쪽 AGV #10의 Wheel이 틀어져서 SLAM 복구가 어려운 상황입니다. 지연시간이 너무 오래될 것 같으므로 우선 지게차로 박스포장기 가동하겠습니다.
March 30, 2025 at 4:41 AM, 배병민 (Bae Byoungmin): 조금만 기다려주세요 곧 조치될꺼 같습니다.
March 30, 2025 at 4:55 AM, FA CS AGV David 데이비드: @FA please come to the GF module area.
March 30, 2025 at 4:58 AM, 배병민 (Bae Byoungmin): 죄송합니다. 우선 지게차로 수동 투입 부탁합니다.
March 30, 2025 at 5:00 AM, 원승연(Seungyeon Won): 네

Chunk 704:
March 30, 2025 at 5:17 AM, 원승연(Seungyeon Won): Box packing Light curtain alarm occurred, please check @FA technician
March 30, 2025 at 5:22 AM, Gerbovits Kevin: Going
March 30, 2025 at 5:22 AM, 배병민 (Bae Byoungmin): 박스포장기 투입 AGV 자동투입 하겠습니다
March 30, 2025 at 5:27 AM, 원승연(Seungyeon Won): 네 알겠습니다. 박스포장기 지금 컨베어 진행 중 라이트 커튼 오감지해서 확인 필요합니다
March 30, 2025 at 5:33 AM, 배병민 (Bae Byoungmin): 지금가서 처리해드릴께요
March 30, 2025 at 6:00 AM, 배병민 (Bae Byoungmin): 박스포장기 정상 가동 되었습니다.

Chunk 705:
March 30, 2025 at 6:18 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————
March 30, 2025 at 9:08 AM, 이영혁 paul: 오전 10시에 5,6 라인 S팔레트에서 T팔레트로 전환됩니다

Chunk 706:
March 30, 2025 at 9:09 AM, 이영혁 paul: 변경 사항 있으면 mcs/rtd 로 알려주시기 바랍니다
March 30, 2025 at 9:32 AM, Tklcz Alexandra SL/A: Sziasztok! Boxpackinghez tudna menni valaki?
March 30, 2025 at 9:33 AM, Csepi Árpád: Megyünk
March 30, 2025 at 10:00 AM, 이영혁 paul: 화성 EOL 5,6라인 RTD T팔레트 고정반송 전환되었습니다
March 30, 2025 at 10:00 AM, 노영일 (Yeongil Noh): @한상범(Han Sang Beom) 잘 됐는지 확인해주세요
March 30, 2025 at 10:03 AM, 한상범(Han Sang Beom): 네 알겠습니다. AGV 모드 전환 후 이상유무 확인하겠습니다.

Chunk 707:
March 30, 2025 at 10:35 AM, 한상범(Han Sang Beom): EOL 5,6Line T Pallet(공파레트) 입고 이상 없습니다.
March 30, 2025 at 1:22 PM, Sánta László: @Csepi Árpád Kérlek gyertek a hármas sor végére az ABBhez. Egyik teli raklap dunnage elakadt félúton. Köszi
March 30, 2025 at 1:22 PM, Csepi Árpád: Rendben
March 30, 2025 at 1:27 PM, Tklcz Alexandra SL/A: Kérek karbantartót a boxpackingre.
March 30, 2025 at 1:44 PM, Csepi Árpád: Solved
March 30, 2025 at 1:54 PM, Sánta László: Thank you!

Chunk 708:
March 30, 2025 at 2:53 PM, Csepi Árpád: Solved
March 30, 2025 at 3:47 PM, Tklcz Alexandra SL/A: Boxpackingre kérek valakit, az oldalfal lift nem működik.
March 30, 2025 at 3:47 PM, Csepi Árpád: Megyek
March 30, 2025 at 3:48 PM, Tklcz Alexandra SL/A: Köszi!
March 30, 2025 at 3:55 PM, Csepi Árpád: Solved
March 30, 2025 at 3:55 PM, Csepi Árpád: Solved
March 30, 2025 at 4:58 PM, Tklcz Alexandra SL/A: Kérünk karbantartót az oldalfal igazítóhoz a boxpackingre.

Chunk 709:
March 30, 2025 at 5:01 PM, Csepi Árpád: Megyek
March 30, 2025 at 5:15 PM, Csepi Árpád: Solved
March 30, 2025 at 5:41 PM, Tklcz Alexandra SL/A: Karbantartót kérünk a boxpackingre, gripper hiba.
March 30, 2025 at 5:42 PM, Csepi Árpád: Megyek
March 30, 2025 at 5:50 PM, Csepi Árpád: Solved

Chunk 710:
March 30, 2025 at 6:17 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(5): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián, Gégény Dávid --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János ---------

Chunk 711:
March 30, 2025 at 6:33 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 712:
March 30, 2025 at 7:50 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 31, 2025 at 6:00 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:8/12 Overtime (0):- Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(2): Magyar Balázs, Nagy Gábor

Chunk 713:
March 31, 2025 at 7:07 AM, Őri Imre: Sziasztok! Modul 4 Line nem hoz üres dunnagét a sorra! Emiatt meg kellett állni a sorral! Kérném hogy javítsátok a hibát! Köszönöm!
March 31, 2025 at 7:08 AM, N.Gábor F.A.: Megyünk
March 31, 2025 at 7:37 AM, Éváné Bori Viktória: Sziasztok! Eol 10 szemben AGV 12 ACS alive alarmra áll ki Nézzétek meg légyszi!
March 31, 2025 at 7:37 AM, FA-CS-AGV-Masoud: Coming
March 31, 2025 at 7:42 AM, FA-CS-AGV-Masoud: Solved

Chunk 714:
March 31, 2025 at 7:43 AM, Éváné Bori Viktória: Thank you
March 31, 2025 at 8:29 AM, Őri Imre: Sziasztok! Modul 4 Line nem hoz üres dunnagét a sorra! Emiatt meg kellett állni a sorral! Kérném hogy javítsátok a hibát! Köszönöm!
March 31, 2025 at 8:37 AM, Shakir (MCS): Carrier U017552 on the way for line 4. Thank you

Chunk 715:
March 31, 2025 at 8:39 AM, FACS_JaewonShin: 31st march Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong

Chunk 716:
March 31, 2025 at 8:47 AM, SKOH2/제조-셀,모듈 출하/김병호: @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 금일 셀 출하 완제품 배출중 사이드 커버 plt id 미부착 된 2plt 발견 되어 프린트 부탁드립니다. 해당원인 포장라인에서 확인 부탁드리며, 차량 인원 대기중이라 프린트 출력 빠르게 부탁드립니다 base id : S100635 plt id : E6CP073CPF31193 base id : S100591 plt id : E6CP073CPF31165
March 31, 2025 at 9:05 AM, SKOH2/제조-셀,모듈 출하/김병호: 프린트 출력 늦으실까요?? 해당 제품 지금 출하 준비중이라 인력,차량이 대기중입니다.

Chunk 717:
March 31, 2025 at 9:45 AM, Őri Imre: Sziasztok! Modul 4 Line nem hoz üres dunnagét a sorra! Emiatt meg kellett állni a sorral! Kérném hogy javítsátok a hibát! Köszönöm!
March 31, 2025 at 9:46 AM, Shakir (MCS): Currently FA team working on STK33
March 31, 2025 at 9:48 AM, N.Gábor F.A.: I delete all cmd in scs stk33
March 31, 2025 at 9:50 AM, N.Gábor F.A.: Úton az anyag

Chunk 718:
March 31, 2025 at 9:51 AM, N.Gábor F.A.: @MCS Could you please temporarily stop requesting materials from STK33? The warehouse is under repair for an indefinite period.
March 31, 2025 at 9:55 AM, SKOH2/제조-셀,모듈 출하/김병호: @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0CNV036_RTV01 정지상태입니다. 출하작업 진행중이라 빠른 확인 부탁드립니다
March 31, 2025 at 9:55 AM, SKOH2/제조-셀,모듈 출하/김병호: @FACS @ @FA Technician South Cell Shipment Dock GF Outlift Shear M0CNV036_RTV01 Please check
March 31, 2025 at 9:56 AM, FACS_Hyeongi Son: 이동중입니다

Chunk 719:
March 31, 2025 at 9:57 AM, N.Gábor F.A.: Checking
March 31, 2025 at 9:57 AM, Shakir (MCS): The stk33 is Offline now, please let us know when you finish the work so we can make it online. Thank you
March 31, 2025 at 10:00 AM, N.Gábor F.A.: We will let you know as soon as the system is back up.
March 31, 2025 at 10:00 AM, Shakir (MCS): Thank you
March 31, 2025 at 10:01 AM, N.Gábor F.A.: Your welcome

Chunk 720:
March 31, 2025 at 10:25 AM, SKOH2/제조-셀,모듈 출하/김병호: @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0STK034_P11 M0CNV036_P11 M0CNV036_P11_BP01 정지상태라서 제품 배출이 안되고 있습니다. 출하작업 진행중이라 빠른 확인 부탁드립니다
March 31, 2025 at 10:27 AM, FACS_Hyeongi Son: 이동중입니다
March 31, 2025 at 10:28 AM, SKOH2/제조-셀,모듈 출하/김병호: 1시간 넘게 지연중이라 부탁드립니다.
March 31, 2025 at 10:35 AM, FACS_JaewonShin: 조치 했습니다 모니터링 중입니다

Chunk 721:
March 31, 2025 at 10:35 AM, Shakir (MCS): @N.Gábor F.A. Stk33 repair done ? Could you please let us know some jobs are alternated. Thank you
March 31, 2025 at 10:36 AM, Shakir (MCS): Some jobs are alternated because it is not connected.
March 31, 2025 at 10:41 AM, N.Gábor F.A.: The warehouse is now operational.
March 31, 2025 at 10:42 AM, Shakir (MCS): Now the carriers are moving from STK33. Operation is normalize now ✅ Thank you

Chunk 722:
March 31, 2025 at 4:10 PM, SKOH2/제조-셀,모듈 출하/김병호: @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0CNV036_RTV01 정지상태입니다. 명일 출하 제품 배출중인데 확인 부탁드립니다
March 31, 2025 at 4:11 PM, SKOH2/제조-셀,모듈 출하/김병호: 알람 발생은 없는데 RTV 정지 상태 입니다
March 31, 2025 at 4:12 PM, SKOH2/제조-셀,모듈 출하/김병호: @FACS @ @FA Technician South Cell Shipment Dock 1F M0CNV036_RTV01 Please check
March 31, 2025 at 4:12 PM, FACS_JaewonShin: @FA technician Location : M0CNV036_RTV01 Problem : RTV stopped
March 31, 2025 at 4:12 PM, N.Gábor F.A.: Checking

Chunk 723:
March 31, 2025 at 4:34 PM, FACS_JaewonShin: RTV 포지셔닝에 문제가 있어서 추가 조치중입니다.
March 31, 2025 at 4:50 PM, SKOH2/제조-셀,모듈 출하/김병호: 40분 넘게 인원,장비 대기중인데 얼마나 걸릴가요??
March 31, 2025 at 4:51 PM, FACS_JaewonShin: 거리센서 위치 조정중입니다. 10~30분 소요될거 같습니다.
March 31, 2025 at 4:59 PM, Éváné Bori Viktória: Sziasztok! AGV 17,13 útban van. Küldjétek el kérlek.
March 31, 2025 at 4:59 PM, FA-CS-AGV-Masoud: Coming
March 31, 2025 at 5:01 PM, FACS_Hyeongi Son: 조치했습니다

Chunk 724:
March 31, 2025 at 5:43 PM, 정낙정(JEONG NAK JEONG): @이영혁 paul 18시부터 EOL 5, 6라인 S파레트로 변경 부탁드립니다
March 31, 2025 at 5:45 PM, 이영혁 paul: 지금 출발해서 빠르면 6시 반쯤 가능합니다
March 31, 2025 at 5:45 PM, 박태영: 노영일 피엠님에게 말씀하세요
March 31, 2025 at 5:46 PM, 박태영: 전 연락 받은 적 없습니다
March 31, 2025 at 5:48 PM, 박태영: 기준 정보는 카톡 요청으로 바꾸지 않습니다. 정식 요청 메일을 보내 주세요.
March 31, 2025 at 6:08 PM, 노영일 (Yeongil Noh): 피엠님 제가 공식 메일링 드리겠습니다 @정낙정(JEONG NAK JEONG) 현장 시스템 변경건은 직접 컨택하거나 요청하지 말아주세요.
March 31, 2025 at 6:15 PM, 박태영: 감사합니다 피엠님

Chunk 725:
March 31, 2025 at 6:28 PM, 정낙정(JEONG NAK JEONG): 알겠습니다
March 31, 2025 at 6:48 PM, R. József C SL EOL: Gyertek kérlek eol 3 sor elé 13-as agv alsó safety bumper lett érintve
March 31, 2025 at 6:49 PM, Zoltán Harasztia FA: Kész 😁
March 31, 2025 at 6:54 PM, 노영일 (Yeongil Noh): 피엠님 메일 드렸고 향후 생산계획포함해서 공유 드렸습니다. (다음번 요청은 4/14 예상됨) 확인 부탁 드립니다
March 31, 2025 at 6:57 PM, 박태영: 네 알겠습니다. 현장에서 준비되시면 알려주세요. 시스템 준비하도록 하겠습니디
March 31, 2025 at 7:02 PM, 원승연(Seungyeon Won): 준비 완료되었습니다.

Chunk 726:
March 31, 2025 at 7:03 PM, 박태영: 네 잠시만요
March 31, 2025 at 7:06 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 31, 2025 at 7:18 PM, Atom Yang(MCS/RTD): RTD 에서 EOL 5,6 라인 S 팔레트 투입되도록 변경 적용하였습니다.
March 31, 2025 at 7:18 PM, 박태영: 진행해 보시겠어요?
March 31, 2025 at 7:21 PM, R. József C SL EOL: Gyertek kérlek eolra, 3as sor előtt útban vannak az agv-k Paletta mozgatás van

Chunk 727:
March 31, 2025 at 7:21 PM, Atom Yang(MCS/RTD): Photo
March 31, 2025 at 7:21 PM, Atom Yang(MCS/RTD): @MES, WMS InventoryMove Timeout 발생하였습니다.
March 31, 2025 at 7:21 PM, Döme György F.A: Megyek
March 31, 2025 at 7:27 PM, 원승연(Seungyeon Won): S전환 확인되었습니다
March 31, 2025 at 9:29 PM, R. József C SL EOL: Gyertek kérlek ismét
March 31, 2025 at 10:55 PM, R. József C SL EOL: Elindultunk a boxpackingal
March 31, 2025 at 10:56 PM, R. József C SL EOL: Ismét kérnék segítséget

Chunk 728:
March 31, 2025 at 10:56 PM, Zoltán Harasztia FA: Elöl?
March 31, 2025 at 10:56 PM, Zoltán Harasztia FA: Eol
March 31, 2025 at 10:57 PM, R. József C SL EOL: Igen
March 31, 2025 at 10:58 PM, R. József C SL EOL: El is ment, köszi
March 31, 2025 at 10:58 PM, Zoltán Harasztia FA: Igazán nincs mit 😁
March 31, 2025 at 11:15 PM, R. József C SL EOL: Segítséget kérnék boxpackingra 1 oldalas Nyomtató információ nélküli címkét tesz a palettára
March 31, 2025 at 11:42 PM, R. József C SL EOL: Kész

Chunk 729:
March 31, 2025 at 11:42 PM, R. József C SL EOL: Köszi srácok 🙏😃

Chunk 730:
March 31, 2025 at 11:54 PM, R. József C SL EOL: Modulon a cellbuffer átjáróban szemben hibával áll a 9-es agv Kérlek lessetek rá Köszönöm April 1, 2025 at 12:34 AM April 1, 2025 at 12:34 AM, R. József C SL EOL : Nézzetek rá kérlek a raktárba, agv nem hoz üres palettákat az eol 5-6 sorokra April 1, 2025 at 2:01 AM, R. József C SL EOL : Eol 5-ös sorral szemben útban van a 8-as agv 18-as agv amiatt riaszt Kérlek küldjétek el April 1, 2025 at 6:28 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:8/12+1 overtime Overtime (1): Boromisza Zoltán Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Boromisza Zoltán April 1, 2025 at 6:55 AM, Éváné Bori Viktória : Sziasztok! AGV 5 útban van, kérlek küldjétek el! April 1, 2025 at 6:56 AM, FA-CS-AGV-Masoud : Coming April 1, 2025 at 7:56 AM, FACS_JaewonShin : ■ 1st April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 1, 2025 at 8:57 AM, Czébely Dániel SL—D : @F.A.Balazs @Boromisza Zoltán @N.Gábor F.A. Sziasztok tudtok jönni a box packinghoz ? April 1, 2025 at 8:57 AM, N.Gábor F.A. : Tbm után persze April 1, 2025 at 9:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0CNV036_RTV01 정지상태입니다. 금일 출하 제품 배출중인데 확인 부탁드립니다 South Cell Shipment Dock 1F M0CNV036_RTV01 Please check April 1, 2025 at 9:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : 출하 작업 중이어서 빠른 확인 부탁드립니다 April 1, 2025 at 9:30 AM, FACS_Hyeongi Son : 이동중입니다 April 1, 2025 at 9:35 AM, FACS_Hyeongi Son : 조치했습니다 April 1, 2025 at 9:37 AM, Éváné Bori Viktória : Helló! AGV5 problem in entrance please check! April 1, 2025 at 9:38 AM, FACS_Hyeongi Son : RTV 센서 점검이 필요해보입니다 점검시간은 대략 30분정도 예상됩니다 April 1, 2025 at 9:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : 출하 차량 인원 대기중이라 시간이 많이 없습니다. 빠른 확인 부탁드립니다 April 1, 2025 at 9:40 AM, FA-CS-AGV-Masoud : Coming April 1, 2025 at 9:40 AM, FACS_JaewonShin : Spare RTV로 교체 우선 하고 추후 추가점검하겠습니다. April 1, 2025 at 9:44 AM, FA-CS-AGV-Masoud : Solved April 1, 2025 at 10:28 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0STK034_C01 정지상태입니다. 제품이 크레인에서 이동을 하지 않고 있습니다. April 1, 2025 at 10:29 AM, FACS_JaewonShin : @mcs S100747 has been stopped in crane. Could you check this? April 1, 2025 at 10:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : 알람 메시지는 없는데 기동을 하지 않고 있습니다 April 1, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : yes April 1, 2025 at 10:30 AM, Mohammad Amir : Checking Sir! April 1, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : 지금 한시간 넘게 배출 작업이 지연되고 있습니다. 모니터링 부탁드립니다. April 1, 2025 at 10:31 AM, Mohammad Amir : Sir, Please confirm is this carrier located at M0STK034_C01? Thank you very much! April 1, 2025 at 10:31 AM, FACS_JaewonShin : 계속 현장에서 조치중이었습니다 April 1, 2025 at 10:31 AM, FACS_JaewonShin : It need to send to p11 Pallets is in the crane April 1, 2025 at 10:32 AM, Szijjártó Balázs : Small AGV error on Modul Line3. April 1, 2025 at 10:32 AM, Mohammad Amir : Thank you very much Sir! Working on it! April 1, 2025 at 10:32 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA PM님 해당 구역에 모니터링 부탁 드립니다. 작일부터 계속 알람 발생및 기동 정지로 인하여 출하작업이 1시간 이상 늦어 지고 있습니다. 부탁드립니다 April 1, 2025 at 10:32 AM, FA-CS-AGV-Masoud : Coming April 1, 2025 at 10:35 AM, FA-CS-AGV-Masoud : Solved April 1, 2025 at 10:40 AM, Szijjártó Balázs : Thanks! April 1, 2025 at 10:41 AM, Mohammad Amir : Sir, We are creating job to send it to M0STK034_P11 however SCS reply to us with Hack -6 ,that means such object does not exist. We have updated the location according to your request to M0STK034_C01. But SCS gives message to us that object does not exist. @SCS could you please check this issue. Thank you very much! April 1, 2025 at 10:44 AM, FACS_JaewonShin : We will do manually to go convayor. April 1, 2025 at 10:44 AM, FACS_JaewonShin : After then please mov to cnv m02 port April 1, 2025 at 10:44 AM, Mohammad Amir : Okay Sir, Thank you very much! April 1, 2025 at 10:45 AM, Mohammad Amir : Sure Sir, Please inform me once you are done and we will do it. Thank you very much! April 1, 2025 at 10:55 AM, FACS_JaewonShin : S100747 has been moved to p11 please make job for it April 1, 2025 at 10:56 AM, Mohammad Amir : Checking Sir April 1, 2025 at 11:01 AM, Mohammad Amir : Sir, I have created the job ✅. Monitoring the transfer. Thank you very much! April 1, 2025 at 11:02 AM, Mohammad Amir : @FA @Boromisza Zoltán Could you please check M0CNV036_RTV01 it is OOS that's why created job is waiting. Thank you very! April 1, 2025 at 11:05 AM, Mohammad Amir : Carrier has started to move ✅. Monitoring the process. Thank you very much! April 1, 2025 at 11:07 AM, Mohammad Amir : Sir, Carrier has arrived at M0CNV036_M02 successfully ✅ at 11:07. Please collect it. Thank you very much! April 1, 2025 at 11:09 AM, Mohammad Amir : @FA @Boromisza Zoltán Please check M0CNV023_RTV03 and RTV04 there is Car Fiber Communication Error and it is blocking the transfer commands. Thank you very much! April 1, 2025 at 11:23 AM, Őri Imre : Sziasztok! Modul 4 Line végén el kellene indítani az AGV-ket mert a sor már elindult! Köszönöm! April 1, 2025 at 11:30 AM, FACS_JaewonShin : 현재 정상 동작 중이며 현장에 1명 상주하여 문제없는지 확인하겠습니다. April 1, 2025 at 11:36 AM, Boromisza Zoltán : Solved April 1, 2025 at 11:37 AM, Mohammad Amir : Thank you very much! April 1, 2025 at 1:16 PM, Éváné Bori Viktória : Eol5-6 AGV 17 5 send please April 1, 2025 at 1:16 PM, FA-CS-AGV-Masoud : Sure April 1, 2025 at 1:30 PM, Tóth Gyula : Sziasztok, MOCNV036 M_02 állomáson megállt a cella kiszedès. Hibát nem ír. Rá tudnátok nèzni? Köszönöm szépen. April 1, 2025 at 1:37 PM, FACS_Hyeongi Son : Checking April 1, 2025 at 1:38 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 남쪽 셀 출하 도크 1F M0CNV036_RTV01 정지상태 인거 같습니다. 확인 부탁드립니다 South Cell Shipment Dock 1F M0CNV036_RTV01 Please check April 1, 2025 at 1:39 PM, FACS_Hyeongi Son : 확인중입니다 April 1, 2025 at 1:42 PM, FACS_Hyeongi Son : 조치했습니다 April 1, 2025 at 1:42 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 April 1, 2025 at 2:29 PM, Őri Imre : This message was deleted. April 1, 2025 at 2:30 PM, Őri Imre : 3 soron kellene segítség! Kis AGV megált! Köszönöm April 1, 2025 at 2:30 PM, FA-CS-AGV-Masoud : Coming April 1, 2025 at 2:36 PM, FA-CS-AGV-Masoud : Solved April 1, 2025 at 2:53 PM, Éváné Bori Viktória : Eol AGV 17, 8 send please April 1, 2025 at 2:54 PM, Őri Imre : AGV 5-t a 3 sor végén el kellene indítani! Köszönöm! April 1, 2025 at 2:55 PM, N.Gábor F.A. : Megyünk April 1, 2025 at 4:48 PM, Őri Imre : 3-4 sor között kellene egy kis segítség a kis AGV hez! Köszi! April 1, 2025 at 5:28 PM, Éváné Bori Viktória : Helló! The AGV does not bring the pallet to the eol 5 line, please check April 1, 2025 at 5:28 PM, Mohammad Amir : Checking April 1, 2025 at 5:29 PM, Mohammad Amir : AGV#18 on the way. ✅ Thank you very much! April 1, 2025 at 6:35 PM, Halász György SL : . April 1, 2025 at 6:35 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 2025.Apr Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 1, 2025 at 8:57 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyere kérlek boxpackingra Feri már itt van April 1, 2025 at 10:50 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Sidecover vacuum hiba van April 1, 2025 at 11:45 PM, R. József C SL EOL : Eolon 3-as sor előtt útban vannak az agv-k Kérlek küldjétek el Paletta mozgatás van April 1, 2025 at 11:45 PM, R. József C SL EOL : Köszönöm April 1, 2025 at 11:46 PM, FA CS AGV David 데이비드 : Ok coming April 1, 2025 at 11:52 PM, R. József C SL EOL : Thank you and sorry April 2, 2025 at 2:05 AM April 2, 2025 at 2:05 AM, R. József C SL EOL : Gyertek kérlek boxpackingra Ismét oldalburkolatnál van probléma April 2, 2025 at 2:06 AM, Döme György F.A : Megyünk April 2, 2025 at 4:05 AM, R. József C SL EOL : Kérnék ismét segítséget a boxpackingra Megint a sidecover April 2, 2025 at 6:15 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 2, 2025 at 6:33 AM, Gebri Ákos/SL/A : Sziasztok ! EOLON AGV5 útban van nekünk , légyszíves küldjétek el April 2, 2025 at 6:33 AM, Gebri Ákos/SL/A : Köszönöm April 2, 2025 at 6:34 AM, FA CS AGV Jawad : @Mohammad Amir can you plz ensure delivery empty pallets to 6 line module..? April 2, 2025 at 6:36 AM, Mohammad Amir : Checking! April 2, 2025 at 6:37 AM, FA CS AGV Jawad : Sorry 6 line formation, not Module. April 2, 2025 at 6:38 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 6:42 AM, Mohammad Amir : Currently there is one material S101384 is on the way. ✅ AGV#17 on the way. There are currently there are 41 empty pallets available. We are monitoring to ensure empty pallets follow will continue. Thank you very much! April 2, 2025 at 6:42 AM, Mohammad Amir : Flow** April 2, 2025 at 6:42 AM, FA CS AGV Jawad : Thank you so much... April 2, 2025 at 6:42 AM, Mohammad Amir : You are welcome! April 2, 2025 at 7:06 AM, Szentirmai Z. A/SSL : Please set the material supply of the box packing machine to automatic mode. Thank you! April 2, 2025 at 7:13 AM, Mohammad Amir : For your Information, For both Ports P01 and P02 , There is an LR received but currently there is no materials available. These ports are OOS since 7:07 Am. @FA @Brázik János Please check this issue. Thank you very much! April 2, 2025 at 7:22 AM, Szentirmai Z. A/SSL : Thank you April 2, 2025 at 7:22 AM, Mohammad Amir : You are welcome! April 2, 2025 at 7:23 AM, Csepi Árpád : Hi! What exactly needs to be checked? (P01-P02) Which unit? April 2, 2025 at 7:24 AM, Mohammad Amir : Jó Reggelt Kivánok, Please check F0BPM011_P01/P02. Thank you very much! April 2, 2025 at 7:28 AM, Csepi Árpád : The ports operate in automatic mode! April 2, 2025 at 7:33 AM, Mohammad Amir : Thank you very much! @Szentirmai Z. A/SSL Now job ha been created for F0BPM011_P02 . Two carriers on the way ,one with AGV#12 ✅. I am monitoring the transfer. Thank you very much for! April 2, 2025 at 7:37 AM, Szentirmai Z. A/SSL : Thank you April 2, 2025 at 7:37 AM, Mohammad Amir : You are welcome! April 2, 2025 at 7:54 AM, FACS_JaewonShin : ■ 2nd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 2, 2025 at 8:46 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@@FA Technician 남쪽 셀 출하 도크 GF outleft 정지상태 인거 같습니다. 확인 부탁드립니다 South Cell Shipment Dock GF outleft Please check April 2, 2025 at 8:46 AM, FACS_Hyeongi Son : 이동중입니다 April 2, 2025 at 8:47 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV036_LF02 April 2, 2025 at 9:12 AM, FACS_Hyeongi Son : 조치했습니다 April 2, 2025 at 9:14 AM, SKOH2/제조-셀,모듈 출하/김병호 : 빠른확인 감사합니다 April 2, 2025 at 9:17 AM, Mohammad Amir : @FA @Brázik János Please check M0CNV023_82_023 there is Product Detect Error. Thank you very much! April 2, 2025 at 9:18 AM, 요셉 : EOL agv 전체 acs alive alarm 발생하였습니다 확인 부탁드립니다 April 2, 2025 at 9:18 AM, Duna Don : Working on it Thanks April 2, 2025 at 9:23 AM, Duna Don : All AGVs are now back to normal operation. Thank you for your patience April 2, 2025 at 9:34 AM, Mohammad Amir : @FA @Csepi Árpád Please check this error still exists since 9:08. Thank you very much! April 2, 2025 at 10:27 AM, Csepi Árpád : Solved April 2, 2025 at 10:28 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 2:20 PM, 요셉 : Could you please move the AGV in front of eol line 5 to the side? April 2, 2025 at 2:22 PM, FA CS AGV Jawad : Sure...at your service April 2, 2025 at 2:25 PM, 준용 : @배병민 (Bae Byoungmin) 해체기 화면 및 설비메세지 관련 배포완료되었습니다. April 2, 2025 at 2:29 PM, Mohammad Amir : @FA @Brázik János Please check M0STK022_P02 there is work data error. Thank you very much! April 2, 2025 at 2:34 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 감사합니다 April 2, 2025 at 2:53 PM, Brázik János : Solved April 2, 2025 at 2:53 PM, Mohammad Amir : Thank you very much! April 2, 2025 at 5:32 PM, 배병민 (Bae Byoungmin) : @김성식 @준용 화성 박스포장기 현대 제품 첫투입시 투입 BCR에서 MES (Code 17)알람 발생으로 투입이 안되는데 확인 가능하실까요? 1. 알람명 ㄴ cannot find recipe data about the process 2. PLT ID ㄴ Z053752 April 2, 2025 at 5:33 PM, 준용 : 이동중이라 40분정도 걸릴듯합니다. 관리되는 레시피정보에 603F 모델이 현재 미등록상태로 보입니다. April 2, 2025 at 5:39 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 박스 포장기 잠시 세워두어도 괜찮으실까요? 지금 현상태로 두어야지 확인/조치가 원활할듯 합니다. April 2, 2025 at 6:08 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 2, 2025 at 6:18 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.04.02 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen April 2, 2025 at 6:25 PM, 준용 : 정보추가해두엇습니다 April 2, 2025 at 6:33 PM, 한상범(Han Sang Beom) : 투입확인하였습니다. April 2, 2025 at 6:51 PM, 준용 : 넵 April 2, 2025 at 7:18 PM, Nikolett SL/B EOL : Sziasztok Boxpacking Insert side cover Work Defect error Hibára állt ki . Kérlek gyertek és nézzétek meg Köszönöm April 2, 2025 at 7:37 PM, Nikolett SL/B EOL : Eol 12 es számú AGV t arrébb tudná valaki küldeni? April 2, 2025 at 7:38 PM, FA CS AGV David 데이비드 : Okay, coming April 2, 2025 at 10:48 PM, Boromisza Zoltán : Kész April 2, 2025 at 10:50 PM, 이주봉PM LEE JUBONG(FA) : This message was deleted. April 2, 2025 at 10:51 PM, 이주봉PM LEE JUBONG(FA) : solved April 2, 2025 at 11:06 PM, Denkó Jani (F.A.) : It's not good to just move the CV part a bit further... April 3, 2025 at 12:00 AM April 3, 2025 at 12:00 AM, Boromisza Zoltán : Ismét kész April 3, 2025 at 12:28 AM, Vadász Dóra SSL/B : Sziasztok! 12es agv útban van. Kérlek küldjétek tovább. Köszönöm April 3, 2025 at 12:29 AM, FA CS AGV David 데이비드 : Coming April 3, 2025 at 2:35 AM, Vadász Dóra SSL/B : Sziasztok #12 agv hibán áll, betöltő poziban, 9es cell packinggal szemben. Time over April 3, 2025 at 2:35 AM, FA CS AGV David 데이비드 : Coming April 3, 2025 at 2:37 AM, FA CS AGV David 데이비드 : Solved April 3, 2025 at 2:51 AM, Nikolett SL/B EOL : Újra ez a hiba fordult elő 🥲 April 3, 2025 at 2:52 AM, Denkó Jani (F.A.) : Megyek April 3, 2025 at 3:32 AM, Denkó Jani (F.A.) : Kész April 3, 2025 at 3:57 AM, Vadász Dóra SSL/B : Sziasztok! #9 agv box packingon time over hibával áll. April 3, 2025 at 4:06 AM, FA CS AGV David 데이비드 : @Denkó Jani (F.A.) can you please come to box packing? April 3, 2025 at 4:14 AM, Denkó Jani (F.A.) : Going April 3, 2025 at 4:16 AM, FA CS AGV David 데이비드 : Thank you. It's sorted now. You don't have to come April 3, 2025 at 4:21 AM, FA CS AGV David 데이비드 : Solved April 3, 2025 at 6:56 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4: Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 3, 2025 at 7:28 AM, Szentirmai Z. A/SSL : Jó reggelt! @Brázik János @Csepi Árpád @Édl Tamás A már jól ismert kellemes programokkal várjuk magukat a box packingon! Előre is köszönjük a srgítséget April 3, 2025 at 7:30 AM, Csepi Árpád : Jó reggelt! Köszönjük az invitálást, részt kívánunk venni az eseményen! 😁👌 April 3, 2025 at 7:42 AM, Csepi Árpád : Solved April 3, 2025 at 7:57 AM, FACS_JaewonShin : ■ 3rd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 3, 2025 at 8:01 AM, Szentirmai Z. A/SSL : Köszönöm! Thank you! 감사합니다! Дякую! Cảm ơn bạn! 😉 April 3, 2025 at 9:05 AM, Sánta László : @Csepi Árpád Please check the reason why the AGVs are not bringing empty dunnages! April 3, 2025 at 9:06 AM, Sánta László : For Line3 April 3, 2025 at 9:06 AM, Sánta László : Thanks April 3, 2025 at 9:12 AM, Csepi Árpád : Solved April 3, 2025 at 9:12 AM, Sánta László : Thank you April 3, 2025 at 9:13 AM, Csepi Árpád : The cargo is already on its way! April 3, 2025 at 12:39 PM, Sánta László : @Csepi Árpád We need your help again. A large number of AGVs are in error at the north warehouse, and the empty dunnages are not arriving at either Line3 and Line4 April 3, 2025 at 12:39 PM, Sánta László : Thanks April 3, 2025 at 12:39 PM, FA/CS/AGV/Taimur : Checking April 3, 2025 at 12:39 PM, Sánta László : Thank you! April 3, 2025 at 12:42 PM, FA/CS/AGV/Taimur : AGVs are moving now, Thanks. April 3, 2025 at 12:53 PM, Sánta László : Thanks!(thumbsup) April 3, 2025 at 1:23 PM, 요셉 : Please move the agv in front of eol 5 line to the side. Thank you April 3, 2025 at 1:23 PM, FA/CS/AGV/Taimur : Sure April 3, 2025 at 3:04 PM, Gebri Ákos/SL/A : Sziasztok ! Eolon a 12es számú avg útban van , légyszíves küldjétek egy másik helyre ! Köszönöm ! April 3, 2025 at 3:05 PM, Duna Don : Checking April 3, 2025 at 3:06 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 피엠님. 화성에 AGV이동 요청드립니다. Pallet투입을 위해 지게차 이동이 필요한데 막혀있어서요. April 3, 2025 at 3:06 PM, Gebri Ákos/SL/A : Okay April 3, 2025 at 3:06 PM, Duna Don : Am on it sir April 3, 2025 at 3:06 PM, FA/CS/AGV/Taimur : Checking. April 3, 2025 at 3:07 PM, Gebri Ákos/SL/A : Thank u April 3, 2025 at 3:07 PM, 배병민 (Bae Byoungmin) : 네 저희 AGV 대응인원이 갈꺼에요 이동 동선 현장서 요청주시면 대응해드릴께요 April 3, 2025 at 3:08 PM, Duna Don : Done April 3, 2025 at 3:08 PM, Gebri Ákos/SL/A : Thank u April 3, 2025 at 3:08 PM, Duna Don : You’re welcome April 3, 2025 at 3:09 PM, [민겸]MinGyum : 조치중입니다. April 3, 2025 at 3:19 PM, 요셉 : Please move the agv in front of eol 5 line to the side. Thank you April 3, 2025 at 3:25 PM, Duna Don : Done April 3, 2025 at 4:20 PM, Magosi Erik : @Csepi Árpád can You come to Line3 endplate gantry? Need Your help April 3, 2025 at 4:20 PM, Csepi Árpád : Okay April 3, 2025 at 4:33 PM, Magosi Erik : On Line 3 we send a load request for BMA but it still not arrived. Are there any problems? Port is M3MFA300_p28. April 3, 2025 at 4:34 PM, Csepi Árpád : Solved April 3, 2025 at 4:35 PM, Magosi Erik : Thank You! April 3, 2025 at 4:35 PM, Shakir (MCS) : The job has been terminated by OP action. Carrier on the crane that why carrier is getting delayed. Thank you April 3, 2025 at 4:36 PM, Shakir (MCS) : STK028 April 3, 2025 at 4:37 PM, Magosi Erik : Right now the port is on LR. Shall we make another one? Or can it be stayed like this? April 3, 2025 at 4:38 PM, Sazzad Bhai SKon : There is already a transport order. But the source STK crane is occupied by another pallet and it's not moving. @FA Please check STK028 crane. April 3, 2025 at 5:13 PM, Csepi Árpád : Hi! The crane is stationary in the transport task. The cargo placed on it: ID: PS210-2504010005 A work task has been generated in the CSC program, but it is not moving! Please check it, and if possible, regenerate the task for it. Thank you! April 3, 2025 at 5:13 PM, Sazzad Bhai SKon : Okay, we'll make a manual job from MCS April 3, 2025 at 5:13 PM, Csepi Árpád : Sorry “SCS” April 3, 2025 at 5:14 PM, Csepi Árpád : Yes April 3, 2025 at 5:17 PM, Sazzad Bhai SKon : Crane active now. April 3, 2025 at 5:19 PM, Csepi Árpád : Thank you very much for your help! April 3, 2025 at 5:19 PM, Shakir (MCS) : The job has been completed now cargo stocked on M0STK028(0200101). Thank you April 3, 2025 at 5:30 PM, Magosi Erik : I see BMA is coming. Thank You everyone April 3, 2025 at 5:37 PM, Csepi Árpád : Yes! The process has started again now. April 3, 2025 at 6:21 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 3, 2025 at 9:37 PM, Vadász Dóra SSL/B : Sziasztok EOL agv-ket le kéne lőni, amíg egy palettát megcserélünk. Viszonylag sürgős April 3, 2025 at 9:39 PM, Szücs Géza FT-B : nincs lőfegyverünk 🤣 April 3, 2025 at 9:40 PM, Nikolett SL/B EOL : Sziasztok Eol 9-10 előtt van 5 os számú AGV t arrébb tudjátok küldeni ? Köszönöm April 3, 2025 at 9:41 PM, Vadász Dóra SSL/B : Thank you @Muneeb Ur Rehman April 3, 2025 at 9:41 PM, Boromisza Zoltán : Megyek April 3, 2025 at 9:41 PM, Vadász Dóra SSL/B : Megoldva April 3, 2025 at 9:42 PM, Denkó Jani (F.A.) : Ne menj 🫣 April 3, 2025 at 9:43 PM, Muneeb Ur Rehman : Done April 3, 2025 at 9:45 PM, Nikolett SL/B EOL : 18as Számú a helyére állt 🫠 April 3, 2025 at 9:45 PM, Denkó Jani (F.A.) : @Boromisza Zoltán mégis menj 😂😂😂😂 April 3, 2025 at 9:47 PM, Vadász Dóra SSL/B : Miattam volt minden baj 🥲 De már sínen a dolog April 3, 2025 at 9:49 PM, Denkó Jani (F.A.) : Mint József Attila?🤨😏 April 3, 2025 at 9:49 PM, Vadász Dóra SSL/B : Neeeem. A lemezpadló nehezen tisztítható April 3, 2025 at 9:55 PM, Muneeb Ur Rehman : It’s there because of the charger position. The position cannot be closed because of its importance. Thank you April 3, 2025 at 11:31 PM, Nikolett SL/B EOL : Az AGV k felsorakozva állnak a 9-10 nél de így nem hozza az üres Palettát a Sorra 😅 April 3, 2025 at 11:34 PM, Muneeb Ur Rehman : Fixed April 4, 2025 at 5:11 AM April 4, 2025 at 5:11 AM, Nikolett SL/B EOL : Modul területén a 12 AGV nem hozza a palettát a Boxpackingra kérlek nézzétek meg Köszönöm April 4, 2025 at 5:15 AM, Muneeb Ur Rehman : Fixed April 4, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 4, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 04 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 4, 2025 at 6:24 AM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget, a pántoló szalagot, nem húzza be a gép. April 4, 2025 at 6:28 AM, N.Gábor F.A. : Reggelt Rendben, meg nézzük April 4, 2025 at 7:49 AM, Éváné Bori Viktória : Sziasztok! GF 2 buffer meg kellne nézni. Error code 701: firesensor abnormal state April 4, 2025 at 7:50 AM, N.Gábor F.A. : Az Múlt hét óta bent ragadt hiba, elvileg dolgoznak rajta, a hibás részt zárolták, a raktár használható April 4, 2025 at 7:51 AM, Éváné Bori Viktória : Ok. Köszi az infót. April 4, 2025 at 7:53 AM, FACS_JaewonShin : ■ 4th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 4, 2025 at 9:33 AM, Kiss András SSL “D” : Sziasztok ! Kérnék segítséget a Formation 15-16 AGV robotok elmozgatásában. Az EOL 3-nál állnak. A kézi emelős anyagszállításnál útban vannak. Köszönöm ! April 4, 2025 at 9:34 AM, FA/CS/AGV/Taimur : Sure, on my way. April 4, 2025 at 4:32 PM, Kiss András SSL “D” : Sziasztok FA ! A Boxpacking-on 2 PLT-nek elszakadt a pántoló szalagja. Viszont az AGV elszállította őket a Modul Dock-ba. Szeretném ezeket a hibásan csomagolt PLT-ket visszakérni a Boxpacking-ra. Tudtok ebben nekem segíteni ? Köszönöm előre is ! S101552 S101549 April 4, 2025 at 4:43 PM, N.Gábor F.A. : Szia Meg nézzük mit tehetünk April 4, 2025 at 5:11 PM, Őri Imre : Modul 3 sor végén lévő raktár kiadó hiba jelzést ad! Megnézése valaki? April 4, 2025 at 5:11 PM, Őri Imre : Köszönöm April 4, 2025 at 5:15 PM, Dávid F.A. : Solved April 4, 2025 at 6:15 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Gép elejétől el kellene küldeni az agv-ket Egy palettát le kellene szednünk Köszönöm April 4, 2025 at 6:16 PM, R. József C SL EOL : Mindjárt érkezem a targival April 4, 2025 at 6:16 PM, Zoltán Harasztia FA : Ok April 4, 2025 at 7:14 PM, R. József C SL EOL : Boxpackingra ismét kérnék segítséget Vákuum probléma April 4, 2025 at 7:15 PM, Zoltán Harasztia FA : Megyünk April 4, 2025 at 7:15 PM, R. József C SL EOL : Köszönöm April 4, 2025 at 8:12 PM, R. József C SL EOL : Ismét kérnék segítséget boxpackingra Vákuum hiba moatt April 4, 2025 at 8:12 PM, Döme György F.A : Megyek April 4, 2025 at 8:13 PM, R. József C SL EOL : Köszönöm April 4, 2025 at 8:39 PM, Halász György SL : Modul GF line4 AGV error! Thanks April 4, 2025 at 8:39 PM, Döme György F.A : Jövök April 4, 2025 at 8:48 PM, Döme György F.A : Kész April 4, 2025 at 10:04 PM, R. József C SL EOL : Szeretnék segítséget kérni oldalburkolathoz Transfer probléma Support on/off alarm April 4, 2025 at 10:04 PM, Sarvajcz Ferenc FA : Ok. April 4, 2025 at 10:05 PM, Zoltán Harasztia FA : Pillanat, raktárban vagyunk April 4, 2025 at 10:09 PM, R. József C SL EOL : Köszönöm April 4, 2025 at 11:40 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Buffer raktár #2 Errorban áll. Légyszíves nézzétek meg. April 4, 2025 at 11:41 PM, Zoltán Harasztia FA : Megyek April 4, 2025 at 11:47 PM, R. József C SL EOL : Boxpacking pántolóhoz szeretnék segítséget kérni Nem sikerül alaphelyzetbe hárítani a forgató asztalt April 4, 2025 at 11:47 PM, Döme György F.A : Rögtön megyek April 4, 2025 at 11:49 PM, R. József C SL EOL : Köszönöm Sikerült megoldani, már csak a szalag szakadás okoz folyamatosan gondot April 5, 2025 at 12:50 AM April 5, 2025 at 12:50 AM, Sási Zsolt SL/C/ EOL : A 15ös AGV útban van. Kérem küldje tovább April 5, 2025 at 1:11 AM, R. József C SL EOL : Boxpackingra kérnék segítséget Side transfert alap helyzetbe kellene állítani April 5, 2025 at 1:12 AM, Zoltán Harasztia FA : Megyünk April 5, 2025 at 1:49 AM, Halász György SL : Hi, Modul GF line4 agv port5 error. Thanks April 5, 2025 at 1:50 AM, Döme György F.A : Mindjárt megyek April 5, 2025 at 2:22 AM, Sarvajcz Ferenc FA : Kész April 5, 2025 at 3:07 AM, Sási Zsolt SL/C/ EOL : 13as AGVt nézzétek meg kérlek. Riaszt April 5, 2025 at 3:08 AM, Muneeb Ur Rehman : Okay Coming April 5, 2025 at 3:11 AM, Muneeb Ur Rehman : Fixed April 5, 2025 at 3:15 AM, Sási Zsolt SL/C/ EOL : Thank you April 5, 2025 at 4:12 AM, Sási Zsolt SL/C/ EOL : Sziasztok. Boxpacking Oldalsó burkolat probléma. Szenzor probléma. Nézzétek meg légyszíves April 5, 2025 at 4:13 AM, Döme György F.A : Megyünk April 5, 2025 at 5:31 AM, Sási Zsolt SL/C/ EOL : Sziasztok a 8 AGV áll hibával a 10 sorral szemben buffer raktárnál. Nézzétek meg légyszíves April 5, 2025 at 6:59 AM, 원승연(Seungyeon Won) : Please resolve the AGV issue as soon as possible. This is before the pallet supply stops. April 5, 2025 at 7:04 AM, FA CS AGV Jawad : Problem lies in stocker...as crane is not taking a pallet from inport. April 5, 2025 at 7:15 AM, Jun(정우준)_SKOH FA : is the crane working now? April 5, 2025 at 7:17 AM, FA CS AGV Jawad : Crane has no issue, its working on Outport, issue lies at inport, it doesnt take pallet from there April 5, 2025 at 7:17 AM, Kiss András SSL “D” : Sziasztok FA ! A Boxpacking 1-es pántoló egységnél a szalag forrasztása nem megfelelő. A művelet végén a gyenge forrasztás miatt a pántszalag szétválik. Ez a hiba már tegnap is több alkalommal jelentkezett. Kérek segítséget a hiba megszűntetése ügyében. Előre is köszönöm ! ————————————————- Hello FA! The soldering of the strap on the Boxpacking 1 unit is not correct. At the end of the operation, the strapping strip separates due to the weak soldering. This error has occurred seve April 5, 2025 at 7:17 AM, FA CS AGV Jawad : Finaly it has moved. Thanks April 5, 2025 at 7:17 AM, Mohammad Amir : Issue has been resolved ✅. Carriers has started to move. April 5, 2025 at 7:40 AM, Kiss András SSL “D” : Tisztelt FA ! Tudtok foglalkozni a hibával ? April 5, 2025 at 7:41 AM, N.Gábor F.A. : Szia Rá nézünk de nem tudok semmit ígérni April 5, 2025 at 7:46 AM, 원승연(Seungyeon Won) : Thanks April 5, 2025 at 7:46 AM, Mohammad Amir : You are welcome,Sir! April 5, 2025 at 8:02 AM, Éváné Bori Viktória : Helló! EOL 4-3 AGV 17, 5 send please April 5, 2025 at 8:02 AM, FA CS AGV Jawad : Sure April 5, 2025 at 8:41 AM, Éváné Bori Viktória : Helló! Eol 5 AGV 17, 8 send please. April 5, 2025 at 8:41 AM, FA CS AGV Jawad : Ofcourse. April 5, 2025 at 8:59 AM, 백한용 left this chatroom. April 5, 2025 at 9:48 AM, Kiss András SSL “D” : Sziasztok ! Kérném ismét az AGV 8 ,17 elmozgatását. Köszönöm ! April 5, 2025 at 9:48 AM, 원승연(Seungyeon Won) : Plz move AGV 12, 17 April 5, 2025 at 9:49 AM, FA CS AGV Jawad : Sure April 5, 2025 at 9:49 AM, FA CS AGV Jawad : OMW April 5, 2025 at 10:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@FAMCS@@FA Technician M0STK034 carrier id : UNKDBS-2504059957521 location : 0102009 Dest EQP : M0CNV036_M02 WMS상의 전산과 재고 차이 발생으로 해당렉이 있는 제품 배출 부탁드립니다 UNK제품이라 저희가 배출해서 확인이 블가능 합니다. 강제 배출 부탁드립니다! April 5, 2025 at 10:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS@FAMCS@@FA Technician M0STK034 carrier id : UNKDBS-2504059957521 location : 0102009 Dest EQP : M0CNV036_M02 Due to the difference between inventory on WMS Please discharge the product with the corresponding check. Because it‘s a UNK product, we can discharge it and check it. Please force the discharge! April 5, 2025 at 10:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : 아무도 없으신가요??? April 5, 2025 at 10:40 AM, 배병민 (Bae Byoungmin) : 주임님 출고장 계신가요? April 5, 2025 at 10:41 AM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 April 5, 2025 at 10:41 AM, SKOH2/제조-셀,모듈 출하/김병호 : Dest EQP : M0CNV036_M02 April 5, 2025 at 10:41 AM, SKOH2/제조-셀,모듈 출하/김병호 : 요기 포트로 배출좀 부탁드립니다 PM님 April 5, 2025 at 10:43 AM, 배병민 (Bae Byoungmin) : 네 지금 제가 전극에있어서 한 30분정도 걸릴꺼 같은데 괜찮으실까요? April 5, 2025 at 10:44 AM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 감사합니다 April 5, 2025 at 11:16 AM, SKOH2/제조-셀,모듈 출하/김병호 : 펨님 좀 더 걸리실까요??? April 5, 2025 at 11:38 AM, 배병민 (Bae Byoungmin) : 지금 해드리겠습니다. 다른 이슈좀 보느라ㅎ 잠시만요 April 5, 2025 at 3:26 PM, 원승연(Seungyeon Won) : Please move to AGV #13 We need to move Pallet April 5, 2025 at 3:26 PM, FA CS AGV Jawad : Sure April 5, 2025 at 3:26 PM, 원승연(Seungyeon Won) : Thanks! April 5, 2025 at 3:34 PM, Szijjártó Balázs : I feel some kind of disturbance in the force. The small AGVs are stopped between the lines (Modul 3-4). April 5, 2025 at 4:34 PM, 원승연(Seungyeon Won) : There are no pallets at 10 Line Packing. It seems there might be an issue with M0STK013. Please check it. April 5, 2025 at 4:34 PM, 원승연(Seungyeon Won) : 10라인 팔레트가 공급안되는데 확인 부탁드립니다. 버퍼창고 3번의 Z300136 팔레트가 paused 상태입니다 April 5, 2025 at 4:38 PM, N.Gábor F.A. : Done Now moving April 5, 2025 at 4:44 PM, 원승연(Seungyeon Won) : Thanks! April 5, 2025 at 6:05 PM, R. József C SL EOL : Sziasztok Boxpacking üzemel April 5, 2025 at 11:12 PM, R. József C SL EOL : @Döme György F.A Gyertek kérlek boxpackingra 🤣 Sidecover felvételi probléma van April 5, 2025 at 11:13 PM, Döme György F.A : Azonnal megyünk April 5, 2025 at 11:13 PM, R. József C SL EOL : Köszönöm April 5, 2025 at 11:24 PM, Döme György F.A : Kész April 5, 2025 at 11:38 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 8as AGV hibában áll April 5, 2025 at 11:38 PM, FA CS AGV David 데이비드 : Coming April 5, 2025 at 11:38 PM, Döme György F.A : Itt vagyok April 5, 2025 at 11:41 PM, Döme György F.A : Kész April 6, 2025 at 12:43 AM April 6, 2025 at 12:43 AM, R. József C SL EOL : 5-ös sorral szemben eolon 8as agv Kitöltő portnál áll Nézzétek meg kérlek April 6, 2025 at 12:44 AM, FA CS AGV David 데이비드 : Ok coming April 6, 2025 at 12:44 AM, R. József C SL EOL : Thank you April 6, 2025 at 12:47 AM, FA CS AGV David 데이비드 : Solved April 6, 2025 at 1:20 AM, R. József C SL EOL : Sziasztok Modul 2es sorral szembeni kitöltő portra nézzetek rá kérlek 1 paletta várakozik ott, hibaüzenet nincs April 6, 2025 at 1:21 AM, Döme György F.A : Megnézzük April 6, 2025 at 1:24 AM, R. József C SL EOL : Köszönöm April 6, 2025 at 2:47 AM, Halász György SL : Hi, Modul GF dock AGV error. Thanks April 6, 2025 at 2:47 AM, FA CS AGV David 데이비드 : Coming April 6, 2025 at 2:52 AM, FA CS AGV David 데이비드 : Solved April 6, 2025 at 3:32 AM, R. József C SL EOL : Eol 2 sor előtt kissé útban van az agv Kérlek küldjétek el April 6, 2025 at 3:32 AM, Döme György F.A : Megyek April 6, 2025 at 3:40 AM, R. József C SL EOL : Köszönöm April 6, 2025 at 3:46 AM, Sarvajcz Ferenc FA : Melyikre gondolsz? April 6, 2025 at 3:47 AM, R. József C SL EOL : Gyuri már el küldte Viszont boxpackingon kérnék segítséget Oldalfal felvételi probléma van April 6, 2025 at 3:54 AM, Döme György F.A : Kész April 6, 2025 at 3:55 AM, R. József C SL EOL : Köszönöm April 6, 2025 at 4:31 AM, R. József C SL EOL : Ismét kérnék segítséget boxpackingra Sidecover felvételi probléma April 6, 2025 at 4:46 AM, Döme György F.A : Kész April 6, 2025 at 4:46 AM, R. József C SL EOL : Köszönöm April 6, 2025 at 6:02 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Szabadi Miklós Kiss Balázs Oláh Andris ———————————— Assembly(5): Nagy Zsolt Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor April 6, 2025 at 7:17 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 06 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 6, 2025 at 8:19 AM, Éváné Bori Viktória : Helló! Eol AGV 17 ACS alive alarm, please check! April 6, 2025 at 8:19 AM, FA CS AGV Jawad : I do April 6, 2025 at 8:43 AM, Éváné Bori Viktória : Hello! AGV 16 please move April 6, 2025 at 8:43 AM, FA CS AGV Jawad : Ok April 6, 2025 at 9:17 AM, Őri Imre : Modul 3-4 line között a két AGV egymás útját keresztezi! Még tudnátok nézni? April 6, 2025 at 9:18 AM, Őri Imre : Köszönöm April 6, 2025 at 9:18 AM, FA CS AGV Jawad : I check April 6, 2025 at 9:53 AM, Éváné Bori Viktória : Hello! GF buffer problem. Please check. April 6, 2025 at 9:58 AM, N.Gábor F.A. : Ha az 1 meg a 4 re gondoltál akkor kész April 6, 2025 at 9:59 AM, Éváné Bori Viktória : Az operátorok jelezték hogy F.A. segítséget kérnek. Az eol 5-6 hibái miatt nem tudok jelen lenni, csak továbbítottam a segítség kérést April 6, 2025 at 9:59 AM, N.Gábor F.A. : Okés Valószínűleg ezek voltak April 6, 2025 at 10:07 AM, FA CS AGV Jawad : @Shakir (MCS) bhae can you plz check pallet ID S101696 is at STK011 P06, is not taken away by crane ? April 6, 2025 at 10:08 AM, duzzaman Md (MCS) : Checking April 6, 2025 at 10:17 AM, duzzaman Md (MCS) : @SCS @FA Please check S101696 located at M0STK011_P06. Everything seems okay from MCS side.. At 09:53:46, the job was terminated, then the job was again created shortly. At 9:55, there was light curtain error, it was resolved then again At 9.55 port P06 went OOS and after port came to in service shortly. The same error occurred again and got resolved at 9:56. However carrier is still not moving. Please check the STK. Thank you! April 6, 2025 at 10:18 AM, N.Gábor F.A. : Checking April 6, 2025 at 10:27 AM, Shakir (MCS) : The job has been completed successfully carrier stocked M0STK011(0101106). Issue has been resolved now ✅ Thank you April 6, 2025 at 11:19 AM, Kiss András SSL “D” : Sziasztok FA ! A Boxpackingra nem hoznak PLT-ket az AGV-k. Kérlek nézzetek rá, hogy ennek mi lehet az oka ? Köszönöm ! April 6, 2025 at 11:19 AM, N.Gábor F.A. : Meg nézzük April 6, 2025 at 12:45 PM, Kiss András SSL “D” : @mcs Hello ! I would like to ask for your help with the following problem. On Formation Boxpacking, since 10:30, Base PLT ID : S has not arrived in the queue. Currently, I see 32 EA FULL PLTs in the Buffer, but the AGV is not delivering them to Boxpacking. What is the reason for this ? April 6, 2025 at 12:53 PM, Shakir (MCS) : Hello There is Lot no available that’s why plts not coming once the lot available it will automatically job will create. Thank you April 6, 2025 at 12:53 PM, Shakir (MCS) : We received LR successfully at 08:05. April 6, 2025 at 12:54 PM, 배병민 (Bae Byoungmin) : Please make sure that packaging is selected in WMS. April 6, 2025 at 12:59 PM, Kiss András SSL “D” : The WMS inspection has begun with the help of a Samkoo coordinator. April 6, 2025 at 1:05 PM, Hmyang(Hungary) : @Shakir (MCS) @duzzaman Md (MCS) pls be sure this. Thx April 6, 2025 at 1:05 PM, Shakir (MCS) : Noted, Thank you April 6, 2025 at 1:07 PM, 원승연(Seungyeon Won) : 해결되었습니다 April 6, 2025 at 1:12 PM, Shakir (MCS) : This message was deleted. April 6, 2025 at 1:12 PM, Shakir (MCS) : This message was deleted. April 6, 2025 at 1:12 PM, Shakir (MCS) : Now, There is 34 pallets available in lot, @FA Please check the port F0BPM011_P02 is OOS. Thank you April 6, 2025 at 1:13 PM, N.Gábor F.A. : Checking April 6, 2025 at 1:14 PM, Shakir (MCS) : 2 jobs has been initiated for F0BPM011_P02. On the way Thank you April 6, 2025 at 1:15 PM, Shakir (MCS) : Now its INSERVICE Issue has been resolved ✅ Thank you April 6, 2025 at 1:16 PM, Kiss András SSL “D” : The problem is solved. I received the necessary information from Samkoo. This means that the request for the next 36 PLTs of the WMS has been approved on our part. We will know what to do in such a case next time. Thank you for your help! April 6, 2025 at 1:17 PM, Shakir (MCS) : You’re welcome April 6, 2025 at 3:17 PM, Őri Imre : Modul 3 line mögött feltorlódtak az AGV-k! April 6, 2025 at 4:18 PM, Éváné Bori Viktória : This message was deleted. April 6, 2025 at 4:19 PM, Éváné Bori Viktória : Helló EOL AGV 18 send please April 6, 2025 at 4:19 PM, FA CS AGV Jawad : Okz April 6, 2025 at 6:48 PM, R. József C SL EOL : Boxpackingra szeretnék segítséget kérnék Vacuum hiba van April 6, 2025 at 6:49 PM, Zoltán Harasztia FA : Megyünk April 6, 2025 at 10:24 PM, Sási Zsolt SL/C/ EOL : Sziasztok 8as AGV kiallt hibával a 6sor előtt. Nézzétek meg légyszíves April 6, 2025 at 10:25 PM, FA CS AGV David 데이비드 : Ok coming April 6, 2025 at 10:26 PM, Sási Zsolt SL/C/ EOL : Done April 7, 2025 at 1:08 AM April 7, 2025 at 1:08 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget Sidecover felvételi probléma Köszönöm April 7, 2025 at 1:09 AM, Döme György F.A : Megyünk April 7, 2025 at 1:18 AM, Döme György F.A : Kész April 7, 2025 at 1:19 AM, R. József C SL EOL : Köszönöm April 7, 2025 at 1:24 AM, R. József C SL EOL : Ismét ugyan az Gyertek kérlek April 7, 2025 at 6:05 AM, R. József C SL EOL : Sziasztok Boxpackingra szeretnék segítséget kérni, sajnos nekünk nem sikerült megoldani 1 magas pantolónál bal oldali pántot szaggatja April 7, 2025 at 6:05 AM, R. József C SL EOL : Köszönöm April 7, 2025 at 6:10 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10+2/12(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin, Rácz Dániel --------------- Electrode(4): Kiss Balázs, Szabadi Miklós, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A techn April 7, 2025 at 6:14 AM, Nikolett SL/B EOL : Sziasztok Eol 18 AGV Arrébb tudja valaki küldeni? April 7, 2025 at 6:14 AM, Nikolett SL/B EOL : Köszönöm April 7, 2025 at 6:21 AM, FA/CS/AGV/Taimur : Done. Thank you April 7, 2025 at 7:45 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 07 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 7, 2025 at 7:52 AM, FACS_JaewonShin : ■ 7th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 7, 2025 at 9:09 AM, Nikolett SL/B EOL : Sziasztok Boxpacking folyamatosan kiáll erre a hibára Band Conveyor overrun error A Bal oldali pantszallag folyamatosan elszakad Tudna valaki jönni? Köszönöm April 7, 2025 at 9:58 AM, Nikolett SL/B EOL : 18 as AGV az Eol 6 Line hibára áll ki April 7, 2025 at 9:59 AM, FA/CS/AGV/Taimur : Checking April 7, 2025 at 10:26 AM, 배병민 (Bae Byoungmin) : 화성 박스 해체기 가동 시작하겠습니다. April 7, 2025 at 11:26 AM, Nikolett SL/B EOL : Gf 2 es Buffer megállt kérlek jöjjön valaki April 7, 2025 at 11:48 AM, Denkó Jani (F.A.) : Solved April 7, 2025 at 12:36 PM, Nikolett SL/B EOL : Ha ezzel kész vagytok kérlek írtok majd egy üzenetet róla? April 7, 2025 at 12:45 PM, Denkó Jani (F.A.) : Már dolgoznak is a srácok vele gőz erővel 🫡 April 7, 2025 at 12:56 PM, Nikolett SL/B EOL : Nagyon nagyon Jooo 😁 April 7, 2025 at 1:34 PM, 노영일 (Yeongil Noh) : @박태영 피엠님 셀버퍼 -> #5,6라인 공파레트 고정반송 모드 변경 요청 드립니다.(S -> R) 관련 메일은 송부 드렸고, 지금 바꿔주시면 됩니다. April 7, 2025 at 1:42 PM, 박태영 : 옙 April 7, 2025 at 1:43 PM, 이영혁 paul : R 팔레트로 변경 되었습니다 April 7, 2025 at 2:03 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) 박스포장기 Ford > 현대 제품 변경이후 작업자 부재로 생산 멈춰있습니다. 박스포장기 추가 생산 없으신건가요? April 7, 2025 at 2:04 PM, 원승연(Seungyeon Won) : @AGV Please return the pallet on the AGV. We will change the pallet. Thanks! April 7, 2025 at 2:04 PM, FA/CS/AGV/Taimur : Hi Mr Won, we are working on it. Thanks for the patience. April 7, 2025 at 2:04 PM, 유경호(RYU KYEONGHO) : @Nikolett SL/B EOL April 7, 2025 at 2:06 PM, Nikolett SL/B EOL : The Box Packing operator was on a break. They have returned to the Box Packing area. April 7, 2025 at 2:07 PM, 원승연(Seungyeon Won) : Oh I didn’t know sry April 7, 2025 at 3:05 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 해체기 투입도는 공팔레트중 S 팔레트는 간지가 들어있고 Z 팔레트는 간지가 없습니다. 향후 진행은 간지가 없는걸로 투입되는게 맞으실까요? April 7, 2025 at 3:17 PM, 노영일 (Yeongil Noh) : 네 간지가 없어야하는데 있나요...? April 7, 2025 at 3:22 PM, [민겸]MinGyum : 금요일에 준비하면서 넣은것 같습니다. April 7, 2025 at 3:28 PM, Nikolett SL/B EOL : Ugyan ez a hiba fordult elő April 7, 2025 at 3:32 PM, 배병민 (Bae Byoungmin) : 넵 S 팔레트 전체는 간지가 들어있습니다 April 7, 2025 at 3:59 PM, Boromisza Zoltán : Kész April 7, 2025 at 4:29 PM, Nikolett SL/B EOL : Eol 17 és számú AGV t arrébb tudja valaki küldeni? Köszönöm April 7, 2025 at 4:29 PM, FA/CS/AGV/Taimur : Sure April 7, 2025 at 5:07 PM, 배병민 (Bae Byoungmin) : 금일 박스 해체기 생산은 종료하겠습니다. 명일 주간 모니터링하면서 진행 계획이오니 참고 부탁드립니다. April 7, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 3 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 7, 2025 at 6:25 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 피엠님. 오늘 박스해체기로 투입된 PLT의 MCS Carrier 상태가 NA로 표기가 되는데요. 확인 가능하실까요? April 7, 2025 at 6:26 PM, [민겸]MinGyum : 공팔레트라서 Empty로 표기가 되야하는데, NA로 표기됩니다. April 7, 2025 at 6:30 PM, 배병민 (Bae Byoungmin) : Full/Empty 상위 정보가 없이 해체기 투입되었는데 설비에서는 정보를 알수있는 방법이 없습니다. 오전에 확인하고 해체기 설비에서 우선 무게 정보가 Ok 경우 Empty 정보로 표기되도록 수정 해뒀습니다. 향후 MES로부터 해체기 배출전 Full/Empty 정보 받을 예정입니다. (MES 개발 필요 사항) 우선 해당 PLT 아뒤 주시면 정보 변경 해둘께요 April 7, 2025 at 6:32 PM, [민겸]MinGyum : 메일로 보내드릴께요. April 7, 2025 at 8:29 PM, Tklcz Alexandra SL/A : Hello! I have a question, does anyone know why AGV does not carry the palette for boxpacking? I have 9 more pieces that need to be unpacked. April 7, 2025 at 8:33 PM, VK (mcs) : Can you please tell me equipment ID? April 7, 2025 at 8:38 PM, Tklcz Alexandra SL/A : F0BPM011_P02 April 7, 2025 at 8:39 PM, VK (mcs) : We received LR but there is no available material. April 7, 2025 at 8:39 PM, Tklcz Alexandra SL/A : Okay. Thanks! April 7, 2025 at 11:54 PM, Tklcz Alexandra SL/A : Please move AGV 12. EOL. It's on its way. April 7, 2025 at 11:55 PM, FA-CS-AGV-Masoud : Sure April 7, 2025 at 11:59 PM, Tklcz Alexandra SL/A : Thanks! April 8, 2025 at 1:04 AM April 8, 2025 at 1:04 AM, Tklcz Alexandra SL/A : Hi! Buffer 1 error: SCR CV 01 home return fail error. April 8, 2025 at 6:07 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10/12(+1) Tech, 1Sl Overtime(0): Holiday(1+1): Kovács Ágnes, (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyi April 8, 2025 at 8:09 AM, FACS_JaewonShin : ■ 8th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 8, 2025 at 9:01 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 금주 포드셀 출하 작업중 1,2단 단독으로 포장기에서 밴딩이 되지않고 자동화 창고로 넘어 오는 수량이 많습니다. 해당 포장 설비 확인 부탁드립니다. 출하작업 중 수동으로 밴딩처리 하고 있어서 작업공수 증가 및 출하작업이 지연 되고 있으니 확인 부탁드립니다 April 8, 2025 at 9:05 AM, 배병민 (Bae Byoungmin) : 혹시 팔레트 아뒤 몇개만 알수있을까요? 전일 아침 밴딩 히터 문제가 있어서 밴드가 터지는 문제를 확인 하였습니다 그로인하여 발생한것 같습니다. 오전에 조치는 된상황입니다 금일도 모니터링 해보겠습니다 April 8, 2025 at 9:07 AM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 확인 한건은 12건이상인데 저희가 수동 밴딩하여 처리하였으나 base id 메모를 하지 않았습니다. 추가 발견 되면 메모하여 공유 드리겠습니다. April 8, 2025 at 9:08 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 혹시 1건이라도 발생되면 바로 알려주시면 감사하겠습니다 April 8, 2025 at 9:11 AM, SKOH2/제조-셀,모듈 출하/김병호 : 방금 하나 더 발견 되어 공유 드립니다. S101563 S101565(B) 하단 파렛트가 벤딩 미 체결 된 부분 발견되었습니다. April 8, 2025 at 9:19 AM, 배병민 (Bae Byoungmin) : 네 조치전 포장된 팔레트로 확인 되었습니다. 출하에 불편을 드려죄송합니다 금일 계속 모니터링 해보겠습니다 April 8, 2025 at 9:41 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다. 해당 부분은 화성당담자 분과 협의 부탁드리며, 모니터링 부탁드립니다. April 8, 2025 at 10:05 AM, 박태영 : 피엠님 지금 S로 변경요청 주셨는데 바로 바꾸면 될까요 April 8, 2025 at 10:08 AM, 노영일 (Yeongil Noh) : 네 변경 부탁 드립니다 April 8, 2025 at 10:41 AM, 이영혁 paul : S로 변경 되었습니다 April 8, 2025 at 10:45 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum PM님 해체기 Z 팔레트도 간지 투입되서 계속들어오고 있습니다. 전량 간지 넣으신건가요? 설비에서 간지 바이패스여서 수작업으로 계속 빼는 상황입니다 April 8, 2025 at 10:46 AM, [민겸]MinGyum : 확인해보겠습니다. April 8, 2025 at 10:48 AM, 배병민 (Bae Byoungmin) : 넵 April 8, 2025 at 10:50 AM, 원승연(Seungyeon Won) : S 투입 확인되었습니다. @이영혁 paul @노영일 (Yeongil Noh) April 8, 2025 at 10:52 AM, Nikolett SL/B EOL : 16 os AGV megállt hibára kérlek gyertek Köszönöm April 8, 2025 at 10:52 AM, Duna Don : Checking April 8, 2025 at 11:00 AM, [민겸]MinGyum : 작업지시가 잘못되서 전량 간지가 투입된 상황입니다. April 8, 2025 at 11:13 AM, 배병민 (Bae Byoungmin) : @박태영 PM님 안녕하세요 화성 박스 해체기 공급에 대한 투입 버퍼 수량 설정 알수있으실까요? 버퍼가 1개이면 2개로 늘려서 사용해야 할것 같습니다 반송이 오래걸리는 부분때문입니다. April 8, 2025 at 11:52 AM, 배병민 (Bae Byoungmin) : 네 금번꺼는 일단 저희가 생산하면서 수동 제거하고 있습니다. 차후 물량은 간지 꼭 제거 부탁합니다 April 8, 2025 at 11:53 AM, [민겸]MinGyum : 알겠습니다. April 8, 2025 at 1:31 PM, Horváth László SL/B : Please check CellBuffer#1, OUT C/V against EOL 10 and the line. Thank you. April 8, 2025 at 1:40 PM, Vadász Dóra SSL/B : Sziasztok #17 AGV útban van. Kérlek küldjétek el April 8, 2025 at 1:41 PM, FA/CS/AGV/Taimur : Checking April 8, 2025 at 1:52 PM, Denkó Jani (F.A.) : Solved April 8, 2025 at 3:42 PM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 박스포장기 오퍼레이터 배치 부탁드립니다 April 8, 2025 at 3:49 PM, 한상범(Han Sang Beom) : 네 알겠습니다. April 8, 2025 at 6:01 PM, Tklcz Alexandra SL/A : Sziasztok! Boxpackingre kérünk karbantartót, a kicsomagolón igazító hiba van az oldalfalnál. April 8, 2025 at 6:02 PM, Nikolett SL/B EOL : Eol 12 és AGV hibára állt ki valaki jön és megnézné Köszönöm April 8, 2025 at 6:02 PM, Horváth László SL/B : Please check AGV #17, it is in timeout at the loading C/V opposite EOL 9. April 8, 2025 at 6:02 PM, FA-CS-AGV-Masoud : Coming April 8, 2025 at 6:07 PM, FA-CS-AGV-Masoud : Solved April 8, 2025 at 6:08 PM, FA-CS-AGV-Masoud : @fa Please check port MOSTK011_P06 April 8, 2025 at 6:13 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 8, 2025 at 7:03 PM, Tklcz Alexandra SL/A : Hi! Cell buffer2 error: CRC2 C/V 01 AGV PI0 interface April 8, 2025 at 8:18 PM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum 전일 박스 해체기로 투입된 MCS NA 정보 공팔레트 전수 정보 변경하여 재투입 완료되었으며 정보 정상 확인 되었습니다 > 재투입 완료 38PLT 재투입중 Inner tray 이상 발생 제품이 확인 되어 셀버퍼 수동 포트 주변 적재해뒀습니다. 1PLT이며 Inner tray 일부 교체후 재투입하시면 되겠습니다. > PLT ID Z300128 April 8, 2025 at 8:19 PM, [민겸]MinGyum : 내일 확인해보겠습니다 April 8, 2025 at 8:29 PM, 최준영(JoonYoung Choi) : Please check EOL AGV#5 ACS Error April 8, 2025 at 8:54 PM, 최준영(JoonYoung Choi) : Please check EOL AGV#12 ACS Error April 8, 2025 at 8:56 PM, FA-CS-AGV-Masoud : Coming April 8, 2025 at 8:58 PM, FA-CS-AGV-Masoud : Solved April 9, 2025 at 12:50 AM April 9, 2025 at 12:50 AM, 요셉 : Please check eol agv#12 April 9, 2025 at 12:50 AM, FA-CS-AGV-Masoud : Coming April 9, 2025 at 12:54 AM, FA-CS-AGV-Masoud : Solved April 9, 2025 at 2:05 AM, Tklcz Alexandra SL/A : Kérünk szépen egy karbantartót a boxpackingre. Oldalfalnál probléma van. April 9, 2025 at 2:17 AM, Zoltán Harasztia FA : Kész April 9, 2025 at 3:02 AM, 최준영(JoonYoung Choi) : Please check EOL Buffer Warehouse #1 SMC #2 Fork1 No Response Error April 9, 2025 at 4:20 AM, 요셉 : Please check eol buffer warehouse #1 April 9, 2025 at 4:40 AM, Tklcz Alexandra SL/A : Buffer1 RDB CV 01 INVERTER FAULT CRC CV03 INVERTER FAULT April 9, 2025 at 4:55 AM, Tklcz Alexandra SL/A : Karbantartót kérek a boxpackingre. April 9, 2025 at 5:04 AM, Zoltán Harasztia FA : Kész April 9, 2025 at 5:04 AM, Zoltán Harasztia FA : Kész April 9, 2025 at 5:04 AM, Tklcz Alexandra SL/A : Köszönjük! April 9, 2025 at 6:18 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13 Overtime (0):- Sick (2):Nagy Zsolt, Kasztel Balázs Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(3): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 9, 2025 at 7:54 AM, FACS_JaewonShin : ■ 9th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 9, 2025 at 8:41 AM, Czébely Dániel SL—D : @N.Gábor F.A. Sziasztok! Kellene segítség az EOL 4-en mókolni valamit April 9, 2025 at 8:41 AM, 한상범(Han Sang Beom) : 화성 EOL 4Line Packing 경로가 ACS상 막혀있는것으로 보입니다. 현재 공파레트 투입안되고 있습니다 확인 부탁드립니다. @배병민 (Bae Byoungmin) April 9, 2025 at 8:42 AM, N.Gábor F.A. : Megyünk April 9, 2025 at 8:47 AM, FACS_TaehyeongJin : 조치완료하였습니다 April 9, 2025 at 8:53 AM, 배병민 (Bae Byoungmin) : 4라인 금일부터 생산하시는건가요? April 9, 2025 at 9:12 AM, 한상범(Han Sang Beom) : 금일 4라인 버스트런 진행입니다. April 9, 2025 at 10:53 AM, SKOH2/제조-셀,모듈 출하/김병호 : @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) @이정훈(Jeonghoon Lee) @배병민 (Bae Byoungmin) 금일 포드샐 출하 제품에 plt id 미부착 발견 되었습니다. base id : S101901 plt id : E5CP073CPF40349 프린트 부탁드립니다. 현재 출하작업 중이라 빠른 확인 바랍니다 April 9, 2025 at 12:15 PM, Czébely Dániel SL—D : @N.Gábor F.A. Hello tudtok jönni a box packinghoz a tető felvevőnél vákum probléma van April 9, 2025 at 12:33 PM, 배병민 (Bae Byoungmin) : 제가 전극에 있어서 카톡이 안되 지금봤습니다. 재프린트 되셨을까요? April 9, 2025 at 12:38 PM, SKOH2/제조-셀,모듈 출하/김병호 : 정낙정 주임께서 수동 출력 해주셨습니다 펨님 확인 감사합니다 April 9, 2025 at 12:42 PM, 노영일 (Yeongil Noh) : @배병민 (Bae Byoungmin) 피엠님 작년에 요청 드린 PLT 4면 라벨 validation 기능 추가 현황 문의 드립니다. 작업자 교육은 시키겠습니다만.... 수작업이다보니 재발리스크는 항상 있는거고, 설비에서 validation이 필요합니다. April 9, 2025 at 1:16 PM, 배병민 (Bae Byoungmin) : 네 PM님 검토는 완료되어 설비단에서 라벨 Mismacth 알람 기능을 추가 계획입니다. 아직 적용전이며 계획 수립하여 적용 예정입니다. 일정 수립하여 공유드리겠습니다. April 9, 2025 at 1:23 PM, 노영일 (Yeongil Noh) : 넵 감사합니다 저희도 최근 신규인원이 많아 라벨 부착 교육하겠습니다. 라벨 최대 4장까지만 인쇄 mes기능은 적용되어 있습니다 April 9, 2025 at 5:57 PM, Sási Zsolt SL/C/ EOL : Sziasztok 4es sorral szemben kiallt az AGV. Nézzétek meg gyorsan kérlek. Itt a vevő April 9, 2025 at 6:00 PM, FA CS AGV David 데이비드 : Coming April 9, 2025 at 6:02 PM, FA CS AGV David 데이비드 : Solved April 9, 2025 at 6:04 PM, Sási Zsolt SL/C/ EOL : Thank you April 9, 2025 at 7:12 PM, R. József C SL EOL : Kérlek gyertek boxpackingra Vacuum hiba van a felső burkolatnál April 9, 2025 at 7:12 PM, R. József C SL EOL : Köszönöm April 9, 2025 at 7:20 PM, Zoltán Harasztia FA : Kész April 9, 2025 at 7:20 PM, R. József C SL EOL : Köszönöm April 9, 2025 at 8:13 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Oldalburkolatná a transfert alaphelyzetbe kell állítani April 9, 2025 at 8:14 PM, R. József C SL EOL : Köszönöm April 9, 2025 at 8:48 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyere kérlek Boxpackingra 1 és pántolónál kell segíteni Feri már itt April 9, 2025 at 11:32 PM, R. József C SL EOL : Sziasztok Cell bufferre lessetek rá kérlek Daruk nem mozognak April 9, 2025 at 11:32 PM, R. József C SL EOL : 2-es buffer April 9, 2025 at 11:32 PM, Zoltán Harasztia FA : Megyünk April 10, 2025 at 2:45 AM April 10, 2025 at 2:45 AM, R. József C SL EOL : Gyertek kérlek boxpackingra sidecovernél probléma, Align aralm, 1 senzos nem lát April 10, 2025 at 2:54 AM, R. József C SL EOL : Eol 3-4 sor előtt útban van az agv, küldjétek el kérlek Elég csak 1-et köszönöm April 10, 2025 at 2:56 AM, FA CS AGV David 데이비드 : Done April 10, 2025 at 3:34 AM, R. József C SL EOL : Modul 5-4 sor között áll az agv hibával, kérlek nézzétek meg Köszönöm April 10, 2025 at 3:35 AM, R. József C SL EOL : Thaks @FA CS AGV David 데이비드 April 10, 2025 at 3:35 AM, FA CS AGV David 데이비드 : Checking April 10, 2025 at 3:36 AM, R. József C SL EOL : Boxpacking pántolóhoz szeretnék segítséget kérni Jobb oldalon égeti a pantot az 1 magas pántoló April 10, 2025 at 4:32 AM, R. József C SL EOL : Boxpackingra szeretnék kérni egy kis segítséget April 10, 2025 at 5:07 AM, R. József C SL EOL : Eolon 3-4 előtt útban van kérlek küldjétek el az agvt #17 April 10, 2025 at 5:07 AM, R. József C SL EOL : Köszönöm April 10, 2025 at 5:07 AM, FA CS AGV David 데이비드 : Coming April 10, 2025 at 5:09 AM, R. József C SL EOL : Thank you April 10, 2025 at 5:14 AM, FA CS AGV David 데이비드 : Done April 10, 2025 at 5:27 AM, R. József C SL EOL : 3-4 sor előtt ismét útba van az agv Kérlek küldjétek el kérlek 5 paletta van még mozgatásra April 10, 2025 at 5:27 AM, R. József C SL EOL : Köszönöm April 10, 2025 at 5:28 AM, FA CS AGV David 데이비드 : Coming April 10, 2025 at 5:29 AM, R. József C SL EOL : Pls wait, Now moving April 10, 2025 at 5:33 AM, Sási Zsolt SL/C/ EOL : 9es AGV hibával áll a Modul területén April 10, 2025 at 5:33 AM, FA CS AGV David 데이비드 : Coming April 10, 2025 at 5:42 AM, FA CS AGV David 데이비드 : Solved April 10, 2025 at 6:19 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt, Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(4): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel, Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 10, 2025 at 8:00 AM, FACS_JaewonShin : ■ 10th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 10, 2025 at 8:37 AM, Tóth Gyula : Sziasztok, MOCNV036 M02 Cella kikèrèsnèl megállt a lift. Kèrlek nèzzètek meg. Köszönöm szépen. April 10, 2025 at 9:37 AM, 애니 : @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) @이정훈(Jeonghoon Lee) @배병민(Bae Byoungmin) 금일 포드샐 출하 제품에 plt id 미부착 발견 되었습니다. base id : S102004 plt id : E6CP073CPF40457 프린트 부탁드립니다. April 10, 2025 at 9:39 AM, 애니 : @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) @이정훈(Jeonghoon Lee) @배병민 (Bae Byoungmin) April 10, 2025 at 9:48 AM, 애니 : 현재 출하작업 중이라 빠른 확인 부탁드립니다 April 10, 2025 at 10:01 AM, 애니 : 프린트 출력이 좀 걸리실까요? 저희 지금 해당 차량을 싣는 작업중입니다 April 10, 2025 at 10:27 AM, FACS_TaehyeongJin : 조치완료하였습니다 April 10, 2025 at 10:40 AM, 애니 : 네 감사합니다 April 10, 2025 at 11:27 AM, Czébely Dániel SL—D : @N.Gábor F.A. Sziasztok ez a palletát ki kell kérni a modul raktárból nem lett jó a pántolás és manuálisan újra pántolnánk. Tudnátok ebben segíteni? S102169 April 10, 2025 at 11:29 AM, N.Gábor F.A. : @Mcs Can you send to this manual port M0CNV036_M04 this palette? S102169 April 10, 2025 at 11:33 AM, duzzaman Md (MCS) : Job has been created successfully. Thank you April 10, 2025 at 11:33 AM, N.Gábor F.A. : Thank you April 10, 2025 at 11:34 AM, N.Gábor F.A. : Úton van az anyag, tudtok majd dolgozni vele April 10, 2025 at 11:45 AM, N.Gábor F.A. : I can't see this palette job S102169 I see the palette this position but not moving M0CNV036_P01 I want to move to M0CNV036_M04 Please check April 10, 2025 at 11:45 AM, Mohammad Amir : I am checking April 10, 2025 at 11:45 AM, N.Gábor F.A. : Thank you April 10, 2025 at 11:49 AM, N.Gábor F.A. : Sorry M0CNV036_P11 April 10, 2025 at 11:54 AM, Mohammad Amir : When we are sending command ,We are receiving Unable to execute response from CCS . Could you please confirm me is there any carrier located at M0CNV036_BP01? Thank you very much! April 10, 2025 at 12:01 PM, N.Gábor F.A. : Yes, now there is in the M0CNV036_BP01 April 10, 2025 at 12:06 PM, Mohammad Amir : So the current location of S102169 is at M0CNV036_P11_OP01? Please confirm! Thank you! April 10, 2025 at 12:06 PM, Mohammad Amir : BP01** April 10, 2025 at 12:06 PM, N.Gábor F.A. : Yes, there here April 10, 2025 at 12:06 PM, Mohammad Amir : Thank you! April 10, 2025 at 12:07 PM, N.Gábor F.A. : Your welcome April 10, 2025 at 12:08 PM, Mohammad Amir : Location has been updated. ✅ Please fix error at M0CNV036_P11 and P11_BP01 there is stop detect error. After I will proceed to solve the rest of the issue. Thank you very much! April 10, 2025 at 12:08 PM, N.Gábor F.A. : Okay Thank you April 10, 2025 at 12:08 PM, Mohammad Amir : You are welcome! April 10, 2025 at 12:29 PM, Mohammad Amir : Issue has been resolved ✅ S102169 Carrier has started to move. Monitoring the process. Thank you very much! April 10, 2025 at 12:30 PM, N.Gábor F.A. : Thank you April 10, 2025 at 12:31 PM, Mohammad Amir : You are welcome,now carrier has successfully arrived at MCNV036_M04 ✅. Please collect it. Thank you! April 10, 2025 at 12:37 PM, Tóth Gyula : Hallo, Cells unloading only : MOCNV036_M02 April 10, 2025 at 4:44 PM, Mohammad Amir : @N.Gábor F.A. Please check M3MFA300_P01 is OOS and that's why one job is Alternated. Thank you very much! April 10, 2025 at 4:44 PM, N.Gábor F.A. : Checking April 10, 2025 at 4:46 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 4:46 PM, N.Gábor F.A. : That part is currently under repair by production. April 10, 2025 at 4:46 PM, Mohammad Amir : Thank you very much for the information! April 10, 2025 at 4:46 PM, N.Gábor F.A. : Your welcome April 10, 2025 at 6:11 PM, R. József C SL EOL : Sziasztok boxpackingra szeretnék kérni egy kis segítséget April 10, 2025 at 6:11 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 10 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 10, 2025 at 6:12 PM, Zoltán Harasztia FA : 2 perc és ott vagyunk, most érünk be modulra April 10, 2025 at 6:13 PM, R. József C SL EOL : Köszönöm April 10, 2025 at 6:44 PM, R. József C SL EOL : Eol 3 előtt útban lesz az agv Kérlek küldjétek el Targonca fog menni az első sorokhoz utána paletta mozgatás lesz April 10, 2025 at 6:44 PM, FA CS AGV David 데이비드 : Coming April 10, 2025 at 7:07 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget ismét Oldalburkolat felvételi probléma 1 magas pántoló probléma April 10, 2025 at 7:08 PM, Döme György F.A : Megyünk April 10, 2025 at 7:09 PM, R. József C SL EOL : Köszönöm April 10, 2025 at 8:39 PM, R. József C SL EOL : Cellbufferre nézzétek meg kérlek riaszt Földszinten a 2-es April 10, 2025 at 8:39 PM, Döme György F.A : Megyek April 10, 2025 at 9:46 PM, Zoltán Harasztia FA : Kész April 10, 2025 at 9:51 PM, R. József C SL EOL : Köszönöm April 10, 2025 at 9:51 PM, R. József C SL EOL : Boxpackingrol van valami fejlemény? April 10, 2025 at 9:52 PM, Zoltán Harasztia FA : Igen ,megcsinaltuk April 10, 2025 at 9:52 PM, R. József C SL EOL : Azt is köszönöm 😘 April 10, 2025 at 10:52 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 5cellpaking sorrol nem viszi el az AGV a kész palettát. Nézzétek meg légyszíves April 10, 2025 at 10:53 PM, Döme György F.A : Nézem April 10, 2025 at 10:53 PM, Sási Zsolt SL/C/ EOL : Sürgős, hamarosan a gép megáll telítettséggel April 10, 2025 at 10:53 PM, Sási Zsolt SL/C/ EOL : Köszi April 10, 2025 at 10:55 PM, FA CS AGV David 데이비드 : @Shahbaz 샤바즈 MCS/RTD is there any available lots? April 10, 2025 at 10:55 PM, Shahbaz 샤바즈 MCS/RTD : There is UR with carrier ID “S102245” which is already in the stocker M0STK014. Please confirm the carrier ID. Thanks April 10, 2025 at 10:56 PM, FA CS AGV David 데이비드 : Yes the carrier ID is S102245 April 10, 2025 at 10:57 PM, Shahbaz 샤바즈 MCS/RTD : Yes, but It’s from EOL to cell buffer. April 10, 2025 at 10:58 PM, Shahbaz 샤바즈 MCS/RTD : But the same carrier stored in cell buffer M0STK014 at 22:27. April 10, 2025 at 11:01 PM, FA CS AGV David 데이비드 : That's strange April 10, 2025 at 11:03 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Döme György F.A Please confirm the pallet at cell buffer M0STK014_0202506, S102245 stored there at 22:28 April 10, 2025 at 11:03 PM, FA CS AGV David 데이비드 : What's the solution to this ? April 10, 2025 at 11:03 PM, FA CS AGV David 데이비드 : Yes he checked and I saw it too April 10, 2025 at 11:05 PM, Shahbaz 샤바즈 MCS/RTD : Remove the pallet from M0STK014 through manual port to confirm. April 10, 2025 at 11:07 PM, FA CS AGV David 데이비드 : Thanks April 10, 2025 at 11:18 PM, FA CS AGV David 데이비드 : All sorted now April 10, 2025 at 11:21 PM, Döme György F.A : Production removed the pallet. The issue was that it had two different barcodes on it: S0102244 and S102245. April 10, 2025 at 11:23 PM, Shahbaz 샤바즈 MCS/RTD : It’s actually S0102244 as there was UR from EOL 5 earlier but at cell buffer S0102245 was read and stored. April 10, 2025 at 11:58 PM, R. József C SL EOL : Gyertek kérlek boxpackingra megint szakítja a pántot April 10, 2025 at 11:58 PM, R. József C SL EOL : Köszönöm April 11, 2025 at 12:09 AM April 11, 2025 at 12:09 AM, 원승연(Seungyeon Won) : Please check that the labels on all four sides match before loading the pallet. @R. József C SL EOL April 11, 2025 at 12:28 AM, R. József C SL EOL : Boxpackingra ismét segítséget kérnék April 11, 2025 at 1:35 AM, R. József C SL EOL : Eol 10es sornál a #15 agv timover hibát jelez Paletta rajta van, adat nincs Nézzétek meg kérlek April 11, 2025 at 1:36 AM, R. József C SL EOL : Work data mismatch April 11, 2025 at 1:37 AM, FA CS AGV David 데이비드 : Checking April 11, 2025 at 1:37 AM, FA CS AGV David 데이비드 : Solved April 11, 2025 at 1:40 AM, R. József C SL EOL : Thanks April 11, 2025 at 5:40 AM, Nikolett SL/B EOL : Sziasztok az 1 es Buffer GF kiállt hibára C/V 01 Light curtain defect error kérlek gyertek Köszönöm April 11, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12(+1) Tech, 1Sl Overtime(0): Holiday(2+1): Rácz Dániel, Czeilinger Krisztián (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Csanálosi Gábor, Böröcz Tamás --------------- Assy GF (2): Pintye Miklós, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 11, 2025 at 6:43 AM, 노영일 (Yeongil Noh) : @박태영 피엠님 금일 08시경 5,6,라인 공트레이 고정반송모드 변경 요청 드립니다(메일 공유드렸습니다) S -> R April 11, 2025 at 7:50 AM, FACS_JaewonShin : ■ 11th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 2 Jin taehyeong Jin jaejeong April 11, 2025 at 8:07 AM, 이영혁 paul : 처리되었습니다 April 11, 2025 at 8:17 AM, 한상범(Han Sang Beom) : 5,6라인 R Pallet 투입 확인하였습니다. @노영일 (Yeongil Noh) @이영혁 paul April 11, 2025 at 4:00 PM, 한상범(Han Sang Beom) : @FA AGV#13 ACS Alive Alarm has occurred. Please check. April 11, 2025 at 4:00 PM, FA CS AGV Jawad : On it April 11, 2025 at 4:04 PM, FA CS AGV Jawad : Solved April 11, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 11, 2025 at 6:55 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 11 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 11, 2025 at 7:12 PM, Tklcz Alexandra SL/A : Sziasztok! Boxpackingre kérünk technikust, probléma van az oldalfalnál April 11, 2025 at 7:30 PM, Csepi Árpád : Solved April 11, 2025 at 8:42 PM, Tklcz Alexandra SL/A : Karbantartót kérünk a boxpackinghez. April 11, 2025 at 8:42 PM, Tklcz Alexandra SL/A : Oldalfal vákum hiba. April 11, 2025 at 9:26 PM, Csepi Árpád : Solved April 11, 2025 at 9:30 PM, Tklcz Alexandra SL/A : Köszönjük és egyúttal: Megint kérek szépen karbantartást oldalfalhoz, Align Alarm April 11, 2025 at 9:31 PM, Csepi Árpád : Rendben April 11, 2025 at 9:43 PM, Csepi Árpád : Solved April 11, 2025 at 11:23 PM, Tklcz Alexandra SL/A : Boxpackingen karbantartóra lenne szükségünk az AGV.hez. April 11, 2025 at 11:24 PM, FA-CS-AGV-Masoud : Coming April 11, 2025 at 11:27 PM, FA-CS-AGV-Masoud : Solved April 12, 2025 at 12:12 AM April 12, 2025 at 12:12 AM, Gebri Ákos/SL/A : Sziasztok ! Boxpackingra kérnénk egy koreai technikust April 12, 2025 at 12:13 AM, Gebri Ákos/SL/A : We would like to get some help at boxpacking . We need a Koreaian technican April 12, 2025 at 12:13 AM, Gebri Ákos/SL/A : Thank u April 12, 2025 at 12:35 AM, Tklcz Alexandra SL/A : Kérünk karbantartót a boxpackingre. April 12, 2025 at 12:52 AM, Csepi Árpád : Solved April 12, 2025 at 1:09 AM, Tklcz Alexandra SL/A : Boxpacking: MES Message MES Code 19 Result valus is invalid. Pallet weight complete report April 12, 2025 at 1:57 AM, Tklcz Alexandra SL/A : Please move AGV 12 in boxpacking. We have to take down a pallet with a forklift April 12, 2025 at 1:57 AM, FA-CS-AGV-Masoud : Sure April 12, 2025 at 5:30 AM, Tklcz Alexandra SL/A : EOL 9 buffer AGV error. April 12, 2025 at 5:31 AM, FA-CS-AGV-Masoud : Coming April 12, 2025 at 5:36 AM, Tklcz Alexandra SL/A : AGV13 EOL error. April 12, 2025 at 5:36 AM, FA-CS-AGV-Masoud : Coming April 12, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása válto April 12, 2025 at 6:35 AM, Nikolett SL/B EOL : Jó reggelt GF #2 Buffer H/S palet Backlash defect stop off error hibára állt ki valaki tudna jönni megnézni? Köszönöm April 12, 2025 at 6:38 AM, Denkó Jani (F.A.) : Hamarosan érkezünk. April 12, 2025 at 6:58 AM, Denkó Jani (F.A.) : Kész van 😮‍💨 April 12, 2025 at 8:28 AM, Nikolett SL/B EOL : Újra 🥲 April 12, 2025 at 8:28 AM, Denkó Jani (F.A.) : Az baj 🙄 April 12, 2025 at 8:35 AM, Denkó Jani (F.A.) : Megint jó 🫣 April 12, 2025 at 8:35 AM, Denkó Jani (F.A.) : Bizonytalan ideig 😂😂 April 12, 2025 at 10:40 AM, 배병민 (Bae Byoungmin) : @박태영 PM님 안녕하세요 화성 박스포장기에서 R 타입 포장을 진행하려고 합니다. WMS에서 포장 진행을 하여도 잡생성이 안되고 있는데 혹시 MCS R 타입 설정되어있는지 확인 부탁드립니다 April 12, 2025 at 10:41 AM, 김주연 : @Atom Yang(MCS/RTD) @이영혁 paul 확인부탁드리겠습니다. April 12, 2025 at 10:43 AM, Atom Yang(MCS/RTD) : 확인 후 답변 올리겠습니다. April 12, 2025 at 10:49 AM, Atom Yang(MCS/RTD) : This message was deleted. April 12, 2025 at 10:49 AM, Atom Yang(MCS/RTD) : 화성 5,6라인에는 R 타입으로 팔렛트 반송하도록 설정되어 있는 것을 확인하였습니다. April 12, 2025 at 10:50 AM, 배병민 (Bae Byoungmin) : 박스포장기로도 R 타입 설정이 되어있으실까요? April 12, 2025 at 10:51 AM, Atom Yang(MCS/RTD) : PM님, 박스 포장기가 화성 EOL 라인이라면, 맞습니다. April 12, 2025 at 10:52 AM, 박태영 : WMS에서 메세지 받았는지 획인해주세요 April 12, 2025 at 10:52 AM, 박태영 : 이건 셀버퍼창고->포장기 문의 입니다 April 12, 2025 at 10:53 AM, 배병민 (Bae Byoungmin) : EOL 에서 Cell buffer 창고로는 R 타입 팔레트가 정상적으로 반송되고 있습니다. 다만 Cell buffer 창고에서 박스포장기로 안되는 부분입니다 April 12, 2025 at 10:54 AM, Choi Inbo/최인보 : 안녕하세요 혹시 wms에서 포장 버튼 누르면 해당 팔렛 앞에 Y가 보이시나요? April 12, 2025 at 10:55 AM, 정낙정(JEONG NAK JEONG) : 지금 Y 보이는 상태입니다 April 12, 2025 at 10:57 AM, Choi Inbo/최인보 : 이게 mcs로 뷰 제공이 안되고 있는지 잠시 확인해 보겠습니다 April 12, 2025 at 11:02 AM, Atom Yang(MCS/RTD) : 네, 확인되었습니다. 포장기로는 아직 R 타입이 등록되지 않은 간태로 확인됩니다. April 12, 2025 at 11:04 AM, Atom Yang(MCS/RTD) : @박태영 박태영 PM님, 포장기로 Z Type 반송 룰 추가할지 검토 요청드립니다. April 12, 2025 at 11:10 AM, Choi Inbo/최인보 : wms가 mcs로는 R 베이스팔렛을 뷰로는 보여드리고 있어서 대상으로는 보이실거 같은데 혹시 S 팔렛 설정이 추가되면서 R 팔렛은 대상으로 안보고 있는건지 봐야될거 같습니다 April 12, 2025 at 11:11 AM, 박태영 : RTD 추가가 필요합니다 완료 후 테스트 요청드리겠습니다 April 12, 2025 at 11:11 AM, 정낙정(JEONG NAK JEONG) : 알겠습니다 April 12, 2025 at 11:13 AM, Atom Yang(MCS/RTD) : RTD 에 R Type 반공 추가하였습니다. 테스트/확인 요청합니다. April 12, 2025 at 11:18 AM, Atom Yang(MCS/RTD) : RTD/MCS에서는 R type carrier 반송 잡 생성 확인되었습니다. 현장 실물 반송 회신 대기하겠습니다. April 12, 2025 at 11:18 AM, 정낙정(JEONG NAK JEONG) : 네 알겠습니다 April 12, 2025 at 11:19 AM, Nikolett SL/B EOL : Z053722 számú palettát szeretném kikérni a Bufferbol de valamiért nem hozza ki pedig a Port Type is át van állítva Tudnátok jönni kérlek? April 12, 2025 at 11:22 AM, Denkó Jani (F.A.) : Megyünk mindjárt April 12, 2025 at 11:25 AM, 정낙정(JEONG NAK JEONG) : 박스포장기에 R파레트 투입 확인했습니다. 대응 감사드립니다. April 12, 2025 at 11:25 AM, Atom Yang(MCS/RTD) : 네, RTD에서도 반송 완료 확인하였습니다. 확인 감사합니다. April 12, 2025 at 12:17 PM, Nikolett SL/B EOL : Boxpacking Az R es Paletta címkés palettát és at S es Paletta címkés palettát össze rakta Ami álltál: This Cell has been set to pending at assembly building : Lower Palletbase hibára állt ki Boxpacking The pallet labeled "R" and the pallet labeled "S" were combined. It stopped due to the following error: "This Cell has been set to pending at assembly building: Lower Palletbase". April 12, 2025 at 5:19 PM, 요셉 : Please move the front agv of EOL 4L to the side. Thank you April 12, 2025 at 5:20 PM, FA CS AGV Jawad : Sure April 12, 2025 at 5:45 PM, Nikolett SL/B EOL : Sziasztok Boxpacking a paletták nem mozdulnak meg elindultak a várakozó helyükről a paletták . És a Pántolónál össze csusztak ez miatt a paletták Valaki tudna jönni? Köszönöm April 12, 2025 at 5:47 PM, Denkó Jani (F.A.) : Átadjuk az infót az éjszakás kolégáknak és hamarosan érkeznek 🫡 April 12, 2025 at 5:48 PM, Nikolett SL/B EOL : Okes köszönöm April 12, 2025 at 5:50 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2+2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 12, 2025 at 6:51 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 12 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 12, 2025 at 6:57 PM, Csepi Árpád : Solved April 12, 2025 at 8:33 PM, Tklcz Alexandra SL/A : Please check boxpacking AGV. April 12, 2025 at 8:36 PM, Csepi Árpád : Solved April 12, 2025 at 8:36 PM, Tklcz Alexandra SL/A : Köszönöm! April 12, 2025 at 8:36 PM, Csepi Árpád : Rendben April 12, 2025 at 8:58 PM, Magosi Erik : @Csepi Árpád please come to Line2 cell loading area. Same error with agv and its in the way of 2 other agv. Thank You April 12, 2025 at 8:59 PM, FA-CS-AGV-Masoud : Coming April 12, 2025 at 8:59 PM, Magosi Erik : Thank You April 12, 2025 at 9:00 PM, FA-CS-AGV-Masoud : Solved April 12, 2025 at 9:01 PM, Magosi Erik : Thank You Sir! April 12, 2025 at 9:04 PM, FA-CS-AGV-Masoud : @fa Please Check MOSTK012_P09 April 12, 2025 at 9:07 PM, FA-CS-AGV-Masoud : @Csepi Árpád April 12, 2025 at 10:04 PM, VK (mcs) : @Csepi Árpád Are you still working on the port 9 2nd cell buffer? April 12, 2025 at 10:18 PM, Csepi Árpád : Solved April 12, 2025 at 10:18 PM, Magosi Erik : Thank You! April 12, 2025 at 10:19 PM, Csepi Árpád : “I’m sorry for the delay in getting back to you!” April 12, 2025 at 10:20 PM, VK (mcs) : Thank you April 13, 2025 at 12:19 AM April 13, 2025 at 12:19 AM, Tklcz Alexandra SL/A : MOSTK013-STK-OP#2 PLC Error: CRC2 C/V03 AGV PI0 Interface error. April 13, 2025 at 12:25 AM, Tklcz Alexandra SL/A : Can anyone help me why I can't get a palette for boxpacking? April 13, 2025 at 12:30 AM, VK (mcs) : There is no available material April 13, 2025 at 12:32 AM, Csepi Árpád : Solved April 13, 2025 at 1:22 AM, Tklcz Alexandra SL/A : Error in buffer, no palett EOL. Please check. April 13, 2025 at 1:31 AM, 원승연(Seungyeon Won) : Please check Buffer warehouse #3 check, R999548 April 13, 2025 at 1:31 AM, 원승연(Seungyeon Won) : @FA April 13, 2025 at 1:32 AM, 원승연(Seungyeon Won) : The equipment is on the verge of stopping. April 13, 2025 at 1:48 AM, VK (mcs) : @FA Please check M0STK011 port 5 is OoS. April 13, 2025 at 1:57 AM, Brázik János : Solved April 13, 2025 at 1:57 AM, 원승연(Seungyeon Won) : Thank you! April 13, 2025 at 1:58 AM, Csepi Árpád : Solved April 13, 2025 at 3:31 AM, Tklcz Alexandra SL/A : Buffer 4 error. Please check. And EOL no palett. April 13, 2025 at 3:44 AM, Csepi Árpád : Solved April 13, 2025 at 3:47 AM, Tklcz Alexandra SL/A : Thanks! April 13, 2025 at 3:50 AM, Csepi Árpád : You’re welcome! April 13, 2025 at 4:30 AM, VK (mcs) : @FA Please check M0STK011 Crane fork 1 no response error! April 13, 2025 at 4:33 AM, 원승연(Seungyeon Won) : What happened at Buffer Warehouse No. 4? It was stopped for a long time. April 13, 2025 at 4:35 AM, VK (mcs) : Alarm was crane travel X distance safety error. April 13, 2025 at 4:36 AM, Csepi Árpád : Solved April 13, 2025 at 4:39 AM, Csepi Árpád : C/V 03. A light curtain fault occurred and blocked the SMC #2 crane. April 13, 2025 at 5:04 AM, 원승연(Seungyeon Won) : AGV 12 check please April 13, 2025 at 5:05 AM, FA-CS-AGV-Masoud : Coming April 13, 2025 at 5:08 AM, FA-CS-AGV-Masoud : Solved April 13, 2025 at 5:25 AM, 원승연(Seungyeon Won) : Plz move AGV #8 April 13, 2025 at 5:25 AM, 원승연(Seungyeon Won) : We have to work April 13, 2025 at 5:25 AM, FA-CS-AGV-Masoud : Sure April 13, 2025 at 6:20 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Fabriczius Gergely, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztá April 13, 2025 at 8:28 AM, Nikolett SL/B EOL : Sziasztok Boxpacking Work Defect Error hiba van Az oldalboritást a vákum felvette majd elengede Tudna valaki jönni? Köszönöm April 13, 2025 at 8:35 AM, Denkó Jani (F.A.) : Hamarosan érkezünk April 13, 2025 at 9:43 AM, 노영일 (Yeongil Noh) : @이영혁 paul @박태영 피엠님, 매니저님 잠시후 10시에 5,6라인 공파레트 고정반송 모드 변경 요청 드립니다 (R -> S) 현재 헝가리에 있는 마지막 S인데 (향후 리턴은 돼서 돌아옴), 모두 사용 후 R 또는 T로 재변경 예정입니다. 재변경시점은 내일쯤 예상되는데 수량보고 더 빨라질 것 같으면 사전 요청 드리겠습니다 감사합니다 April 13, 2025 at 9:46 AM, 박태영 : 네 10시에 변경 진향하겠습니다 April 13, 2025 at 10:00 AM, 이영혁 paul : 변경되었습니다 April 13, 2025 at 10:10 AM, 요셉 : S파레트 투입 확인되었습니다 설비 가동하겠습니다 April 13, 2025 at 10:53 AM, Nikolett SL/B EOL : Ugyan ez a hiba fordult elő April 13, 2025 at 10:54 AM, Boromisza Zoltán : Megyünk April 13, 2025 at 11:02 AM, Boromisza Zoltán : Kész April 13, 2025 at 11:10 AM, Horváth László SL/B : Please check Cell Buffer #1 Fork1 No Response error @Boromisza Zoltán @Denkó Jani (F.A.) April 13, 2025 at 11:11 AM, Denkó Jani (F.A.) : Megyek April 13, 2025 at 11:17 AM, Denkó Jani (F.A.) : Solved April 13, 2025 at 2:48 PM, 배병민 (Bae Byoungmin) : @김종선(Kim,Jongseon) @노영일 (Yeongil Noh) PM님 박스포장기 E805 중량 Spec은 금요일 MES에서 Spec 변경후 PLC <> MES 정상 변경 완료 확인되었습니다. 참고 부탁드립니다. Spec 501~523kg April 13, 2025 at 2:51 PM, Rácz Dániel / FA : This message was deleted. April 13, 2025 at 3:27 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 "S" & "R" 타입 생산은 EOL 5,6라인에서 동일하게 생산되는 모델이라 박스 포장기 투입시 설비내 "S" 또는 "R" 제품 배출을 완료한다음 진행 부탁드립니다. 버퍼가 5,6라인 각 1개씩 설정이 되어있어 동일 라인의 2가지 타입이 혼류될경우 생산이 불가한부분입니다. 개선책으로, 2가지 타입에대한 버퍼 설정 개선은 검토 해보겠습니다. April 13, 2025 at 6:18 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 6:42 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 13 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi April 13, 2025 at 6:44 PM, Szentirmai Z. A/SSL : Hello, please sent to other position the AGV#18 from EOL. Thank you April 13, 2025 at 6:45 PM, FA-CS-AGV-Masoud : Sure April 13, 2025 at 7:18 PM, 노영일 (Yeongil Noh) : 네 피엠님 S R 같이 적재되는 경우가 가끔 있을것같은데 검토 부탁 드립니다 근데 수량이 홀수면 변경시점에 같이 적재할수밖에 없는데 이건 어떻게 해야할까요? April 13, 2025 at 7:21 PM, 노영일 (Yeongil Noh) : @박태영 @이영혁 paul S 소진 시점 금일 22시 예상되어 해당시간에 S -> T 변경 요청 드립니다... April 13, 2025 at 7:22 PM, 박태영 : 간단하게 요청메일 주실수 있을까요? April 13, 2025 at 7:23 PM, 배병민 (Bae Byoungmin) : 버퍼에 남아있는 자제를 강제배출하면 NG 배출포트로 나오게 됩니다. NG 배출 포트 자재를 수동으로 배출하시면 되겠습니다. April 13, 2025 at 7:23 PM, 노영일 (Yeongil Noh) : 네 지금 드리겠습니다 April 13, 2025 at 7:24 PM, 노영일 (Yeongil Noh) : 그럼 마지막 1개남은 S 파렛은 못보내는건가요..? April 13, 2025 at 7:24 PM, Szentirmai Z. A/SSL : @Brázik János @Csepi Árpád @Édl Tamás Sziasztok! Cell Buffer#1 stacker#2 hibában van. Kérlek nézzetek meg. Köszi April 13, 2025 at 7:25 PM, 배병민 (Bae Byoungmin) : 네 1개 남은 상태에서는 자동으로 불가합니다. April 13, 2025 at 7:27 PM, 노영일 (Yeongil Noh) : 출하를 못하는건 말이 안되는것 같고, mes에서 단적재 nack 치는게 문제인거면 해당건은 강제로라도 2단적재 시켜줘야합니다. April 13, 2025 at 7:32 PM, 배병민 (Bae Byoungmin) : S랑 R 타입 적재 및 혼류 생산 부분만 명확히 주시면 검토해서 회신드리겠습니다. 이부분은 명일 뵙고 의논 해보겠습니다. April 13, 2025 at 7:32 PM, Brázik János : Kész April 13, 2025 at 7:35 PM, 노영일 (Yeongil Noh) : 피엠님 메일로 공유 드렸습니다. 확인 부탁 드립니다 April 13, 2025 at 7:36 PM, 배병민 (Bae Byoungmin) : This message was deleted. April 13, 2025 at 7:37 PM, Magosi Erik : Good evening! In Module warehouse there is a cv 015 div up/down error going on. Can someone check please? @Csepi Árpád April 13, 2025 at 7:40 PM, 박태영 : 감사합니다 April 13, 2025 at 7:43 PM, Csepi Árpád : Solved April 13, 2025 at 8:15 PM, Magosi Erik : Thank You April 13, 2025 at 9:53 PM, 이영혁 paul : 10시에 변경 예정입니다 April 13, 2025 at 10:01 PM, 이영혁 paul : S->T 변경 완료 되었습니다 April 13, 2025 at 10:03 PM, 노영일 (Yeongil Noh) : @한상범(Han Sang Beom) @원승연(Seungyeon Won) S와 T는 육안 구분 안되니 1단 및 이후 베이스파렛 투입 잘 확인해주세요. April 13, 2025 at 10:04 PM, 한상범(Han Sang Beom) : 네 알겠습니다. 확인 후 이상유무 공유 드리겠습니다. April 13, 2025 at 11:22 PM, 원승연(Seungyeon Won) : Plz check AGV 17 thank you! April 13, 2025 at 11:22 PM, FA-CS-AGV-Masoud : Coming April 14, 2025 at 3:22 AM April 14, 2025 at 3:22 AM, 원승연(Seungyeon Won) : Plz check AGV 18 thank you! April 14, 2025 at 3:23 AM, FA-CS-AGV-Masoud : Coming April 14, 2025 at 3:26 AM, FA-CS-AGV-Masoud : Solved April 14, 2025 at 8:38 AM, FACS_JaewonShin : ■ 14th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 3 Jin taehyeong Jin jaejeong Kim bareum April 14, 2025 at 9:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) FA MCS(RTD) team The account we are using in “outbound” Someone keeps trying to log in and the account is locked. Please change the password. April 14, 2025 at 9:30 AM, Mohammad Amir : Checking Sir! April 14, 2025 at 9:32 AM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you for your quick confirmation!! April 14, 2025 at 9:32 AM, Mohammad Amir : Sir, For MCS account we have unlocked the account,so now you should be able to login with same password. ✅ Please inform me ,do you face issue in RTD account as well? Thank you very much! April 14, 2025 at 9:36 AM, Mohammad Amir : You are welcome, Sir! April 14, 2025 at 9:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : The RDT account is also locked. Please check it April 14, 2025 at 9:41 AM, Mohammad Amir : Working on it,Sir! April 14, 2025 at 9:42 AM, Mohammad Amir : Sir, Password has been reset successfully ✅. Please use- 1234 to login and set new password. If you face any issue , please feel free to contact me again. Thank you very much! April 14, 2025 at 9:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you for your quick response. April 14, 2025 at 9:49 AM, Mohammad Amir : You are welcome, Sir! April 14, 2025 at 11:53 AM, R. József C SL EOL : 3as sor előtt útban van az agv Kérlek küldjétek el April 14, 2025 at 11:53 AM, R. József C SL EOL : Köszönöm April 14, 2025 at 11:53 AM, FA/CS/AGV/Taimur : Checking April 14, 2025 at 2:07 PM, R. József C SL EOL : Eol 3 előtt útban van az agv Kérlek küldjétek el Köszönöm April 14, 2025 at 2:09 PM, Duna Don : Solved April 14, 2025 at 2:14 PM, R. József C SL EOL : Thanks April 14, 2025 at 4:47 PM, Sási Zsolt SL/C/ EOL : Sziasztok. A 3 sor előtt elküldenétek a 17es AGVt, paletta szállításban akadályoz April 14, 2025 at 4:48 PM, FA/CS/AGV/Taimur : Hi, sure. April 14, 2025 at 5:15 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 3as sor elől küldjétek el az AGVt. Köszönöm April 14, 2025 at 5:16 PM, FA/CS/AGV/Taimur : Sure April 14, 2025 at 5:18 PM, FA/CS/AGV/Taimur : Area is clear now, Thank you April 14, 2025 at 5:36 PM, Mohammad Amir : This message was deleted. April 14, 2025 at 8:26 PM, Szijjártó Balázs : Modul Line 4 UPR case gantry.Small AGV error. "Work data mismatch error" Please help! April 14, 2025 at 8:26 PM, N.Gábor F.A. : Megyünk April 14, 2025 at 9:47 PM, Szijjártó Balázs : Front of the Line 3: ACS Alive Alarm April 15, 2025 at 3:23 AM April 15, 2025 at 3:23 AM, Czébely Dániel SL—D : Sziasztok tudtok jönni a bufferhez GF ? April 15, 2025 at 3:24 AM, N.Gábor F.A. : Megyünk April 15, 2025 at 3:37 AM, Czébely Dániel SL—D : @mcs Hello, I would like to request that this pallet located in location 0200704 from warehouse STK014 be sent to port STK014_M01_OP01. Thanks. April 15, 2025 at 3:41 AM, Shahbaz 샤바즈 MCS/RTD : I created a transfer command for UNK carrier. April 15, 2025 at 3:47 AM, Shahbaz 샤바즈 MCS/RTD : The job is alternated, the HCACK reply is “10: Mismatch cassette size”. April 15, 2025 at 3:52 AM, Czébely Dániel SL—D : Currently, the crane is not releasing the pallet to the unloading port, the unloading port is blocked and does nothing. April 15, 2025 at 3:57 AM, Shahbaz 샤바즈 MCS/RTD : The previous transfer was terminated and now It is showing the destination as crane C01 in MCS. April 15, 2025 at 4:01 AM, Shahbaz 샤바즈 MCS/RTD : The destination change is not working as it gives HCACK : 10 April 15, 2025 at 4:18 AM, N.Gábor F.A. : Can you delete the job from mcs? The system is messed up and now it's being moved from one place to another. April 15, 2025 at 4:20 AM, Shahbaz 샤바즈 MCS/RTD : Currently the carrier is stored and there is no job for it. April 15, 2025 at 4:21 AM, N.Gábor F.A. : @mcs Hello, I would like to request that this pallet located in location 0200704 from warehouse STK014 be sent to port STK014_M01_OP01. Thanks. Can you re create this job? April 15, 2025 at 4:21 AM, N.Gábor F.A. : Thank you April 15, 2025 at 4:22 AM, Shahbaz 샤바즈 MCS/RTD : This UNK carrier is unable to transfer to the M01_OP01 port, I created a job earlier but SCS reply was “HCACK 10: Mismatch Cassette size” April 15, 2025 at 7:07 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS team M0STK034 남쪽 1F M0CNV036 port 에서 RTV 기동정지 상태이며 제품이 나오지 않고 있습니다. 금잏 출하 작업 진행중이라 빠른 확인 부탁드립니다!! April 15, 2025 at 7:09 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS team M0STK034 South 1F The RTV is on the M0CNV036 port and the product is not coming out. The shipment work is in progress today, so please check it as soon as possible!! April 15, 2025 at 7:21 AM, Döme György F.A : Solved April 15, 2025 at 7:51 AM, Halász György SL : Hi, Modul GF dock AGV error Thanks April 15, 2025 at 7:52 AM, FA CS AGV Jawad : OMW April 15, 2025 at 7:55 AM, FA CS AGV Jawad : Solved April 15, 2025 at 8:04 AM, FACS_JaewonShin : ■ 15th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon - mechanic 4 Lee yeongmin Son hyeongi Oh changhoon Choi wooseok - plc control 3 Jin taehyeong Jin jaejeong Kim bareum April 15, 2025 at 8:13 AM, 노영일 (Yeongil Noh) : @박태영 @이영혁 paul 피엠님 매니저님 5 6 라인 공파레트 고정반송 T->R 변경 부탁 드립니다. 요청메일은 드렸습니다. 혹시 공파레트 변경 RTD 개발은 언제쯤될까요? April 15, 2025 at 8:15 AM, 이영혁 paul : 변경 요청 시간이 8시네요 일단 변경 처리 하겠습니다 April 15, 2025 at 8:25 AM, 이영혁 paul : 변경 처리되었습니다. April 15, 2025 at 8:40 AM, 박태영 : This message was deleted. April 15, 2025 at 8:40 AM, 박태영 : 4/24 타겟입니다 April 15, 2025 at 10:03 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) @FACS team M0STK034 남쪽 1F M0CNV036_P11_BP01 port 에서 기동정지 상태이며 제품이 나오지 않고 있습니다. 금일 출하 작업 진행중이라 빠른 확인 부탁드립니다!! April 15, 2025 at 10:03 AM, FACS_Hyeongi Son : 이동중입니다 April 15, 2025 at 10:03 AM, SKOH2/제조-셀,모듈 출하/김병호 : @Bae Byoungmin @FACS team M0STK034 South 1F M0CNV036_P11_BP01 port It is in a state and the product is not coming out. The shipment work is in progress today, so please check it as soon as possible!! April 15, 2025 at 10:13 AM, Shakir (MCS) : Issue has been resolved. Material delivery has been normalised ✅ Thank you very much! April 15, 2025 at 12:38 PM, R. József C SL EOL : Sziasztok, boxpacking Nyomtatónál vacuum hiba van Lessetek rá kérlek April 15, 2025 at 3:17 PM, R. József C SL EOL : Gyertek kérlek modul 5 sorral szemben közre fogtak az agvk April 15, 2025 at 3:18 PM, FA CS AGV Jawad : OMW April 15, 2025 at 3:18 PM, R. József C SL EOL : Thanks April 15, 2025 at 6:20 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "D" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Szabadi Miklós Oláh András ———————————— Assembly(6+1): Zsurbej Zsolt Novák Károly Novák Zoltán Kovács Szabolcs Kasztel Balázs Nagy Zsolt ———————————— Formation/Modul(3): Magyar Balázs Nagy Gábor Martina Dávid ———————————— April 15, 2025 at 10:23 PM, Szijjártó Balázs invited Nagy Mónika. April 15, 2025 at 10:26 PM, Nagy Mónika : Sziasztok, Modul line 3-4- re nem hoz az AGV üres dunnaget. Rànèznètek mi lehet oka? Köszönöm!🙂 April 15, 2025 at 10:26 PM, N.Gábor F.A. : Megyünk April 15, 2025 at 10:28 PM, Muneeb Ur Rehman : On the way April 15, 2025 at 10:30 PM, Muneeb Ur Rehman : Dunnage is on the way April 16, 2025 at 12:53 AM April 16, 2025 at 12:53 AM, Szijjártó Balázs : Kis segítséget kérnék a Line 3 UPR gantryjéhez. Port 01 Sensor&Data mismatch April 16, 2025 at 12:58 AM, VK (mcs) : @FA Please check M0STK011 Crane unload timeout error! April 16, 2025 at 2:14 AM, Dávid F.A. : @Muneeb Ur Rehman end prod Agv Problem.. April 16, 2025 at 2:15 AM, Muneeb Ur Rehman : On my way April 16, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(2): Boromisza Zoltán, Pintye Miklós Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Rácz Dániel --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 16, 2025 at 7:51 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 16 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 16, 2025 at 7:56 AM, FACS_JaewonShin : ■ 16th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 16, 2025 at 9:58 AM, FA CS AGV Jawad : Can someone plz help to remove pallets at End product near packing line..??? AGV detects OSD April 16, 2025 at 10:03 AM, Hmyang(Hungary) : @Denkó Jani (F.A.) can you please help this? Thx April 16, 2025 at 10:08 AM, FA CS AGV Jawad : There are pallets infront of FOBPM012_P03 inport, AGV has an uload job there, plz help to remove these too. April 16, 2025 at 10:10 AM, Mohammad Amir : @FA @Denkó Jani (F.A.) Please check this case as well as it is delaying the transfer job for P03 port of Unpacking machine. Thank you very much! April 16, 2025 at 10:10 AM, 정낙정(JEONG NAK JEONG) : formation workers are working on it April 16, 2025 at 10:10 AM, 요셉 : eol 5L empty pallet is not coming in. Please check April 16, 2025 at 10:11 AM, Mohammad Amir : Checking April 16, 2025 at 10:12 AM, Mohammad Amir : AGV#13 has been assigned to deliver the empty pallet . @ACS @FA CS AGV Jawad please check there is 101_102 status alarm it is delaying transfer. Thank you very much! April 16, 2025 at 10:14 AM, FA CS AGV Jawad : Going there April 16, 2025 at 10:14 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 10:17 AM, Mohammad Amir : Sir, ACS team has resolved the issue . ✅ Vehicle deposit has started. Thank you very much! April 16, 2025 at 12:44 PM, FA CS AGV Jawad : @심정민 (Shim Jungmin) sir Module 4, Block 2, is not running, AGV 10 is waiting for unload, you can plz delete the job / send it back April 16, 2025 at 12:54 PM, Hmyang(Hungary) : @FACS_JaewonShin April 16, 2025 at 12:55 PM, 심정민 (Shim Jungmin) : @배병민 (Bae Byoungmin) 제가 확인해드려야 하는 부분이 있나요? April 16, 2025 at 12:55 PM, Mohammad Amir : This message was deleted. April 16, 2025 at 12:56 PM, Mohammad Amir : @FACS_JaewonShin Sir, could you please cancel the job from ACS. After cancellation I will send this carrier to its source. Thank you very much! April 16, 2025 at 12:56 PM, 배병민 (Bae Byoungmin) : PM님으로 잘못지정된거 같아요ㅎ 아닙니다 April 16, 2025 at 12:56 PM, FACS_JaewonShin : I will check April 16, 2025 at 12:57 PM, Mohammad Amir : Thank you very much Sir! April 16, 2025 at 12:59 PM, FACS_JaewonShin : Job has been canceled April 16, 2025 at 12:59 PM, Mohammad Amir : Thank you very much sir. I am sending this carrier to its source. April 16, 2025 at 1:01 PM, Mohammad Amir : Sir, Job has been created successfully to send the carrier to its source ✅. I am monitoring the transfer. Thank you! April 16, 2025 at 1:09 PM, Mohammad Amir : @FA CS AGV Jawad Carrier T702140 has been stored successfully in M0STK014 (0101201) at 13:07. ✅ Thank you very much! April 16, 2025 at 6:10 PM, Magosi Erik : Good evening! There is a problem with product agv and warehouse. Someone please check! Thank You April 16, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 16, 2025 at 6:29 PM, Magosi Erik : Still having agv problem on module unloading! April 16, 2025 at 6:40 PM, Muneeb Ur Rehman : Fixed April 16, 2025 at 6:42 PM, Magosi Erik : Thank You April 17, 2025 at 1:47 AM April 17, 2025 at 1:47 AM, Tklcz Alexandra SL/A : Hi! AGV12 error EOL10 April 17, 2025 at 1:48 AM, Muneeb Ur Rehman : On my way April 17, 2025 at 1:54 AM, Magosi Erik : There is agv error on product warehouse. Please check! @Csepi Árpád April 17, 2025 at 1:55 AM, Muneeb Ur Rehman : Fixed April 17, 2025 at 1:56 AM, Muneeb Ur Rehman : Fixed too April 17, 2025 at 2:03 AM, Magosi Erik : Thank You Sir April 17, 2025 at 6:15 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 8/12 Tech, 1Sl Overtime(0): Holiday(2): Csanálosi Gábor, Pintye Miklós Sick(1): Gerbovits Kevin, kovács Ágnes --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Rácz Dániel, Böröcz Zamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 17, 2025 at 6:29 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 17 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 17, 2025 at 8:02 AM, FACS_JaewonShin : ■ 17th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 17, 2025 at 11:05 AM, Choi Inbo/최인보 invited 전효철. April 17, 2025 at 11:07 AM, Nikolett SL/B EOL : Sziasztok 13 as AGV t az Eol rol valaki arrébb tudja küldeni? April 17, 2025 at 11:08 AM, FA/CS/AGV/Taimur : Sure. On my way April 17, 2025 at 12:44 PM, Nikolett SL/B EOL : Sziasztok Gf #2 és buffer megállt kérlek gyertek és nézzétek meg Köszönöm April 17, 2025 at 12:47 PM, Nikolett SL/B EOL : Boxpacking is megallt Band 1 input erroral 🥲 1 pántolonál van probléma April 17, 2025 at 12:49 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 박스포장기 확인 부탁합니다 April 17, 2025 at 12:53 PM, Denkó Jani (F.A.) : Kész April 17, 2025 at 1:02 PM, FACS_Youngmin LEE : solved April 17, 2025 at 4:22 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 피엠님. GF Buffer에서 1384 에러발생했습니다. 확인 요청드려요. April 17, 2025 at 4:24 PM, 배병민 (Bae Byoungmin) : 네 확인 인원 보내드릴께요 알람은 발생되면 @FA 로 부탁합니다. April 17, 2025 at 4:24 PM, [민겸]MinGyum : 네. 감사합니다 April 17, 2025 at 4:24 PM, 배병민 (Bae Byoungmin) : @진재정 @FACS_TaehyeongJin 확인 부탁합니다 April 17, 2025 at 4:40 PM, FACS_Hyeongi Son : 조치했습니다 April 17, 2025 at 4:41 PM, [민겸]MinGyum : 네. 감사합니다 April 17, 2025 at 4:42 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 해당 알람 코멘트 있는거죠? April 17, 2025 at 4:44 PM, FACS_Hyeongi Son : 넵 SRC C/V#03 Pallet direction error 입니다 April 17, 2025 at 4:45 PM, Nikolett SL/B EOL : Eol 13 as AGV útba all kérlek gyertek és mozgassatok el Köszönöm April 17, 2025 at 4:45 PM, FA/CS/AGV/Taimur : Sure. On my way April 17, 2025 at 4:47 PM, 배병민 (Bae Byoungmin) : 팔레트가 방향 감지 알람이네요... 실제 90도로 잘못 투입된건가요? 센서 오동작일까요? April 17, 2025 at 4:50 PM, FACS_Hyeongi Son : 파레트가 약간 사행나있었습니다 그래서 사행잡고 센서감지 시킨뒤 정상가동했습니다 April 17, 2025 at 6:04 PM, Tklcz Alexandra SL/A : Sziasztok! Boxpackingre kérek segítséget a nyomtatóhoz. April 17, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician, 1 Sl, ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 6:06 PM, Csepi Árpád : Szia! Nemsokára érkezünk. April 18, 2025 at 5:45 AM April 18, 2025 at 5:45 AM, Tklcz Alexandra SL/A : Hi! Buffer 2 not load in pallett, please help. April 18, 2025 at 5:45 AM, Tklcz Alexandra SL/A : EOL April 18, 2025 at 5:52 AM, Csepi Árpád : Solved April 18, 2025 at 6:26 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 18 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 18, 2025 at 7:16 AM, Herceg Sándor SSL/C : Sziasztok! GF 2-es Cell bufferbe szeretnénk segítséget kérni. Blacklash detect ertor hiba van April 18, 2025 at 8:08 AM, FACS_JaewonShin : ■ 18th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 8 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 1 Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 18, 2025 at 9:10 AM, R. József C SL EOL : @Zoltán Harasztia FA Gf 3as buffert meg tudnátok lesni? April 18, 2025 at 9:34 AM, R. József C SL EOL : 11-12 között útban van az agv Eol April 18, 2025 at 9:34 AM, R. József C SL EOL : Küldjétek el kérlek Köszönöm April 18, 2025 at 9:35 AM, FA/CS/AGV/Taimur : Checking April 18, 2025 at 9:36 AM, R. József C SL EOL : Eol 3-4 betöltö portnál riaszt a 12-es agv Közel van a fal April 18, 2025 at 9:40 AM, FA/CS/AGV/Taimur : AGV-12 fixed ODDS alarm. Thank you April 18, 2025 at 3:40 PM, Halász György SL : Hi, Modul GF line4 AGV lift error Thanks April 18, 2025 at 3:41 PM, Döme György F.A : Itt vagyok April 18, 2025 at 3:41 PM, Halász György SL : Ok April 18, 2025 at 6:15 PM, Őri Imre : Sziasztok! 4 line végén a nagy AGV leált! Rá tudnátok nézni? Köszönöm! April 18, 2025 at 6:15 PM, FA CS AGV David 데이비드 : Coming April 18, 2025 at 6:15 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (3):Csanálosi Gábor, Nagy Tibor, Céhman Zsolt, Sick (0):- Holiday (1):- Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András, Kiss Balázs, Céhman Zsolt Assembly(8): GF: Novák Zoltán, Kovács Szabolcs, Csanálosi Gábor, Zsurbej Zsolt 1F:Nagy Zsolt, Novák Károly, Kasztel Balázs, Nagy Tibor Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 18, 2025 at 6:24 PM, FA CS AGV David 데이비드 : Solved April 19, 2025 at 9:02 AM April 19, 2025 at 9:02 AM, 원승연(Seungyeon Won) : Plz check Formation AGV THANKS! April 19, 2025 at 9:18 AM, Döme György F.A : Solved April 19, 2025 at 9:23 AM, 원승연(Seungyeon Won) : Thanks! April 19, 2025 at 9:58 AM, FA-CS-AGV-Masoud : @fa please check port MOSTK011_P06 April 19, 2025 at 12:50 PM, R. József C SL EOL : Üdv, 8-9 eol sornál útban lesz az agv, jelenleg töltőn van Kérlek küldjétek el Köszönöm April 19, 2025 at 12:50 PM, FA-CS-AGV-Masoud : Coming April 19, 2025 at 12:53 PM, FA-CS-AGV-Masoud : Done April 19, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(5): Novák Zoltán, Kovács Szabolcs, Zsurbej Zsolt, Nagy Zsolt, , Kasztel Balázs, Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 19, 2025 at 7:50 PM, VK (mcs) : @MES Module assembly 3rd line gantry ports 16 and 17 Inventory arrived report reply is : an error occurred in MES M3MFA300-P16 M3MFA300_P17 Please confirm. Thx April 19, 2025 at 7:56 PM, 요셉 : Eol agv#16 check plz Acs alive alarm April 19, 2025 at 7:56 PM, Muneeb Ur Rehman : Checking April 19, 2025 at 7:59 PM, Muneeb Ur Rehman : This message was deleted. April 19, 2025 at 7:59 PM, Muneeb Ur Rehman : Fixed April 19, 2025 at 8:48 PM, Éváné Bori Viktória : Eol5 AGV 10 please check. ACS alive alarm. April 19, 2025 at 8:50 PM, Muneeb Ur Rehman : Checking April 19, 2025 at 9:01 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget. A hátsó fénykapunál nem jól érzékel a senzor, adat elcsúszást okoz Meg kellene nézzétek! @N.Gábor F.A. April 19, 2025 at 9:02 PM, N.Gábor F.A. : Meg nézzük April 19, 2025 at 9:41 PM, Éváné Bori Viktória : Sziasztok! GF 2 buffer hibát jelez, gyertek légyszíves. April 19, 2025 at 9:42 PM, N.Gábor F.A. : Megyünk April 19, 2025 at 10:53 PM, Éváné Bori Viktória : Sziasztok! Box packingen az utolsó pántolónál megállnak a paletták! Nézzétek meg kérlek. April 19, 2025 at 11:09 PM, Dávid F.A. : Solved! 622 CV ragasztó szalag darab vol cv görgő n, szenzor e miatt fals információt kapott! April 19, 2025 at 11:15 PM, Éváné Bori Viktória : Köszönöm April 20, 2025 at 12:06 AM April 20, 2025 at 12:06 AM, Éváné Bori Viktória : AGV 10 problem, check April 20, 2025 at 2:52 AM, Szijjártó Balázs : Egy kis segítséget kérnék a Modul Line 3 Block1-hez.Az AGV hibával áll. April 20, 2025 at 2:52 AM, Muneeb Ur Rehman : Checking April 20, 2025 at 2:58 AM, Muneeb Ur Rehman : Fixed April 20, 2025 at 5:03 AM, Czébely Dániel SL—D : A 11 AGV utban van gyorsan el kell mozgatni April 20, 2025 at 5:03 AM, Czébely Dániel SL—D : !!!!! April 20, 2025 at 5:04 AM, Czébely Dániel SL—D : Formation EOL9 April 20, 2025 at 5:04 AM, Muneeb Ur Rehman : Checking April 20, 2025 at 5:07 AM, Muneeb Ur Rehman : Done April 20, 2025 at 5:48 AM, 노영일 (Yeongil Noh) : @박태영 @이영혁 paul 피엠님 매니저님 5 6 라인 공파레트 고정반송 R->T 변경 요청 드립니다. 잠시후 07시에 변경되도록 부탁 드립니다. 감사합니다 April 20, 2025 at 5:49 AM, 이영혁 paul : 넵 변경되면 메시지 드리겠습니다 April 20, 2025 at 6:06 AM, Fodor István SL/C : Sziasztok, Raneznetek a gepekre formazas ra nem hoznak az agv-k ures raklapokat Koszi April 20, 2025 at 6:06 AM, FA-CS-AGV-Masoud : Checking April 20, 2025 at 6:08 AM, Zoltán Harasztia FA : Szia most megyünk át elektrodáról, pár perc és nézzük April 20, 2025 at 7:05 AM, 이영혁 paul : 변경되었습니다 April 20, 2025 at 7:12 AM, 한상범(Han Sang Beom) : T Pallet 투입 확인하였습니다. @노영일 (Yeongil Noh) @이영혁 paul April 20, 2025 at 7:15 AM, R. József C SL EOL : Modul 5-ös sorral szembeni kitöltő portnál áll a 10-es agv time over hibával Paletta rajta van, adat az nincs Nézzétek meg kérlek April 20, 2025 at 7:18 AM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 7:27 AM, Halász György SL : Hi, Modul GF line4 Lower case loading agv error April 20, 2025 at 7:28 AM, FA-CS-AGV-Masoud : The AGV waits until the port is occupied and then unloads the pallet.so therefore There is no error. April 20, 2025 at 7:28 AM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 7:31 AM, FA-CS-AGV-Masoud : Solved April 20, 2025 at 7:34 AM, R. József C SL EOL : Please coming eol line 5 11 agv data delete please April 20, 2025 at 7:34 AM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 7:35 AM, FA-CS-AGV-Masoud : This message was deleted. April 20, 2025 at 7:36 AM, FA-CS-AGV-Masoud : Solved April 20, 2025 at 9:05 AM, R. József C SL EOL : Boxpackingra kérnék segítséget, szenzor probléma April 20, 2025 at 9:25 AM, R. József C SL EOL : Boxpackingra ismét kérnék segítséget April 20, 2025 at 9:26 AM, R. József C SL EOL : Eol 8-9 sor előtt útban vannak az agv-k Küldjétek el kérlek April 20, 2025 at 9:26 AM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 9:28 AM, Halász György SL : Hi, Modul GF line4 lift agv error April 20, 2025 at 9:29 AM, FA-CS-AGV-Masoud : I already informed to mcs guys to send it again thank you sir April 20, 2025 at 9:29 AM, Halász György SL : Thanks April 20, 2025 at 9:31 AM, FA-CS-AGV-Masoud : Done April 20, 2025 at 9:41 AM, Halász György SL : Hi, Modul GF line4 endplate loading agv error April 20, 2025 at 9:41 AM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 10:15 AM, R. József C SL EOL : Gyertek kérlek ismét a boxpackingra 🥲 April 20, 2025 at 10:15 AM, Zoltán Harasztia FA : Megyünk April 20, 2025 at 10:16 AM, R. József C SL EOL : Sidecover felvételi probléma April 20, 2025 at 10:26 AM, Zoltán Harasztia FA : Kész April 20, 2025 at 10:37 AM, Mohammad Amir : @Zoltán Harasztia FA Could you please check M0STK014 there is fire sensor abnormal alarm. Thank you very much! April 20, 2025 at 10:51 AM, 배병민 (Bae Byoungmin) : Verification completed. This is a sensor malfunction alarm. April 20, 2025 at 10:52 AM, Mohammad Amir : Thank you very much for the confirmation Sir! April 20, 2025 at 11:30 AM, 배병민 (Bae Byoungmin) : 화성 Cell buffer 창고#4에서 화재경보 발생되어 점검 결과 센서 오작동 경보로 확인되었으며 현재 창고는 정상 동작중입니다. 1. 발생 위치 ㄴ Cell buff#4 0200801 2. 발생 시간 ㄴ 4/20 10:37 3. 발생 화물 ㄴ Z300691(Empty PLT) 4. 조치 사항 ㄴ 열연감지센서 커넥터 접점 불량으로 추정되어 재연결 진행 5. 특이사항 ㄴ 화재 시나리오 정상 동작 진행 > 1차 Rack 감지 후, 2차 Crane 미감지시, 해당 화물 수동 포트로 자동 배출 완료 됨 April 20, 2025 at 12:15 PM, Halász György SL : Hi, Modul GF line4 dock agv error April 20, 2025 at 12:15 PM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 12:16 PM, Halász György SL : Thanks April 20, 2025 at 12:18 PM, FA-CS-AGV-Masoud : Solved April 20, 2025 at 1:22 PM, 한상범(Han Sang Beom) : @FA Please check AGV#18 ACS alive alarm April 20, 2025 at 1:22 PM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 1:25 PM, FA-CS-AGV-Masoud : Solved April 20, 2025 at 1:51 PM, R. József C SL EOL : Kérnék ismét segítséget q boxpackingra April 20, 2025 at 1:51 PM, Zoltán Harasztia FA : Úton April 20, 2025 at 2:19 PM, Halász György SL : Hi, Modul GF line4 dock agv error April 20, 2025 at 2:20 PM, FA-CS-AGV-Masoud : Coming April 20, 2025 at 2:20 PM, Halász György SL : Thanks April 20, 2025 at 2:23 PM, FA-CS-AGV-Masoud : Solved April 20, 2025 at 3:40 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra Kellene ismét a segitségetek April 20, 2025 at 5:37 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra ismét 🥲 April 20, 2025 at 6:15 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13+3 Overtime (3):Boromisza Zoltán, Csanálosi Gábor, Szűcs Géza Sick (0):- Holiday (0): Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(7): GF: Novák Károly, Kasztel Balázs, Kovács Szabolcs, Csanálosi gábor 1F: Novák Zoltán, Zsurbej Zsolt, Nagy Zsolt Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Boromisza Zoltán April 20, 2025 at 6:20 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget. Köszönöm April 20, 2025 at 6:20 PM, N.Gábor F.A. : Hamarosan érkezünk April 20, 2025 at 8:25 PM, Szijjártó Balázs : @N.Gábor F.A. Tudnátok segíteni a Line3-o n? Megint ugyanaz a MES hiba a LWR gantrynél, hátha megint megtudjátok bűvölni manuálban. April 20, 2025 at 8:27 PM, Szijjártó Balázs : Ja és emiatt lassan le is fogy a soron a burkolat. April 20, 2025 at 8:27 PM, N.Gábor F.A. : Hali Igyekszünk April 20, 2025 at 8:27 PM, Szijjártó Balázs : Köszi! April 20, 2025 at 9:55 PM, Czébely Dániel SL—D : Sziasztok! Rá tudtok nézni a box packingra ? A keret rárakónál a keret egyik oldalát nem szívja fel a vákum. April 21, 2025 at 6:21 AM April 21, 2025 at 6:21 AM, Tklcz Alexandra SL/A : Jóreggelt! Kérünk szépen karbantartást a boxpackingre. April 21, 2025 at 6:22 AM, Tklcz Alexandra SL/A : Tető align alarm. April 21, 2025 at 6:29 AM, Csepi Árpád : Jó reggelt! Nemsokára érkezünk. April 21, 2025 at 7:06 AM, Csepi Árpád : Solved April 21, 2025 at 7:07 AM, Tklcz Alexandra SL/A : Thanks! April 21, 2025 at 7:45 AM, FACS_JaewonShin : ■ 21st April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son seungmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 21, 2025 at 12:00 PM, Tklcz Alexandra SL/A : Karbantartást kérünk a boxpackingre. 2. nyomtatóval van probléma. April 21, 2025 at 12:37 PM, Szentirmai Z. A/SSL : @Csepi Árpád Kérlek jelezd, ha sikerült megoldani a problémát. Köszi April 21, 2025 at 3:17 PM, FA CS AGV Jawad : @FACS_JaewonShin sir can you plz unassign job for Raw Material AGV 02, 01, line 3-4, port M3MFA300_P28, P31, as per shift leader's information, material need to be send back but not now, & ports are on manual mode. April 21, 2025 at 3:18 PM, Sazzad Bhai SKon : We'll transfer from MCS April 21, 2025 at 3:19 PM, FACS_JaewonShin : Job has been deleted April 21, 2025 at 3:20 PM, FA CS AGV Jawad : Thanks alot April 21, 2025 at 3:53 PM, FA CS AGV Jawad : @Sazzad Bhai SKon, @duzzaman Md (MCS) bhae can you plz help. AGV 02, Raw Material, is loaded with Pallet ID PS210 - 2503100022 with no job. Is it possible to sort this out ? April 21, 2025 at 4:02 PM, duzzaman Md (MCS) : Done bhae. It will be going back to the source. April 21, 2025 at 4:02 PM, FA CS AGV Jawad : Thank you April 21, 2025 at 5:24 PM, Tklcz Alexandra SL/A : Kérünk karbantartót a boxpackingre, súly hiba. MES Message MES Code 19 Result valus is invalid. Pallet weight complete report April 21, 2025 at 5:29 PM, 배병민 (Bae Byoungmin) : It is an actual weight error. Check the MES weight result. It is not a facility problem. April 21, 2025 at 6:15 PM, Horváth László SL/B : Please check AGV #11 at the EOL. Time Over. Thank you. April 21, 2025 at 6:16 PM, FA CS AGV David 데이비드 : Checking April 21, 2025 at 6:17 PM, FA CS AGV David 데이비드 : Solved April 21, 2025 at 6:17 PM, Horváth László SL/B : Thank you April 21, 2025 at 6:21 PM, FA CS AGV David 데이비드 : @FA can someone please check the left crane on the north side. April 21, 2025 at 6:21 PM, Denkó Jani (F.A.) : Coming April 21, 2025 at 6:22 PM, FA CS AGV David 데이비드 : Thank you April 21, 2025 at 6:29 PM, FA CS AGV David 데이비드 : This message was deleted. April 21, 2025 at 6:31 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 8+5/12 Tech, 1Sl Overtime(5): Szabadi Miklós, Harasztia Zoltán, Gégény Dávid, Zsurbej Zsolt Holiday(2): Böröcz Tamás, Rácz Dániel Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Szabadi Miklós - Powder CA AGV(1): Kertész Kornél Dániel --------------- Assy GF (3): Csanálosi Gábor, Gégény Dávid, Zsurbej Zsolt --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Form April 21, 2025 at 6:58 PM, Nikolett SL/B EOL : Sziasztok Az AGV k az Eol területén várakoznak de nem viszik el a Palettat és nem is hoznak a sorra Valaki rá tudna nézni ? Köszönöm April 21, 2025 at 6:58 PM, Horváth László SL/B : Please check AGV #12 at the EOL. April 21, 2025 at 6:59 PM, FA CS AGV David 데이비드 : Checking April 21, 2025 at 7:04 PM, FA CS AGV David 데이비드 : Solved April 21, 2025 at 7:04 PM, Horváth László SL/B : Thank u April 21, 2025 at 9:00 PM, Horváth László SL/B : @Denkó Jani (F.A.) @Boromisza Zoltán Gyertek kerlek a Boxpackingra. Koszonom April 21, 2025 at 9:00 PM, Denkó Jani (F.A.) : Megyünk April 21, 2025 at 9:06 PM, Boromisza Zoltán : Kész April 21, 2025 at 9:08 PM, Horváth László SL/B : Koszonom April 21, 2025 at 10:47 PM, 요셉 : MOSTK013-STK-OP#2 CRC2 C/V05 c/v cw stop time over error check plz April 21, 2025 at 10:58 PM, Zoltán Harasztia FA : Solved April 21, 2025 at 11:34 PM, Horváth László SL/B : Please check 15#AGV at thr EOL Slam Error Thank you April 21, 2025 at 11:34 PM, FA CS AGV David 데이비드 : Checking April 21, 2025 at 11:49 PM, FA CS AGV David 데이비드 : Solved April 21, 2025 at 11:49 PM, Horváth László SL/B : Thank u April 22, 2025 at 2:51 AM April 22, 2025 at 2:51 AM, Vadász Dóra SSL/B : Sziasztok EOL 1-4-ig minden agv áll. Útban van a békásnak. April 22, 2025 at 2:52 AM, FA CS AGV David 데이비드 : Ok April 22, 2025 at 4:04 AM, Nikolett SL/B EOL : Sziasztok Boxpacking nem veszi fel az boritását a palettának valaki tudna jönni? April 22, 2025 at 4:05 AM, Zoltán Harasztia FA : Megyek April 22, 2025 at 4:05 AM, Denkó Jani (F.A.) : Megyünk April 22, 2025 at 6:05 AM, Mohammad Amir : @Zoltán Harasztia FA @FA Could you please check M0STK014 there is fire sensor abnormal state alarm. Thank you very much! April 22, 2025 at 6:05 AM, 조보행(CHO BO HAENG) invited 함희훈(HAM HEE HOON) and 조성준/samkoo/공정-FA. April 22, 2025 at 7:09 AM, Mohammad Amir : @FA This error still exists, please check it. Thank you! April 22, 2025 at 7:12 AM, Csepi Árpád : “Hi! I just checked. I didn’t notice any indications.” April 22, 2025 at 7:12 AM, Mohammad Amir : Okay, Thank you very much for your confirmation! April 22, 2025 at 7:13 AM, Csepi Árpád : “You’re welcome.” April 22, 2025 at 7:49 AM, FACS_JaewonShin : ■ 22nd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son seungmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 22, 2025 at 8:28 AM, Szentirmai Z. A/SSL : Please check AGV#18 from EOL Thank you April 22, 2025 at 8:28 AM, FA CS AGV Jawad : Sure I do April 22, 2025 at 8:50 AM, FA CS AGV Jawad : @Mohammad Amir can you cancle this job for unfinished pallet U020145, end product. April 22, 2025 at 8:52 AM, Mohammad Amir : Job has been cancelled successfully ✅ Thank you very much! April 22, 2025 at 8:53 AM, FA CS AGV Jawad : Thanka April 22, 2025 at 8:54 AM, Mohammad Amir : You are welcome! April 22, 2025 at 9:19 AM, Tklcz Alexandra SL/A : Hi! Eol AGV10 error April 22, 2025 at 9:20 AM, FA CS AGV Jawad : Sure April 22, 2025 at 10:35 AM, 김준기(kim jungi) invited 신해석. April 22, 2025 at 10:39 AM, Tklcz Alexandra SL/A : EOL AGV12 and 14 move please. We need free space for the 10L. April 22, 2025 at 10:40 AM, FA CS AGV Jawad : Sure April 22, 2025 at 11:40 AM, Tklcz Alexandra SL/A : AGV18 move please April 22, 2025 at 11:40 AM, FA CS AGV Jawad : Okz April 22, 2025 at 11:45 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 전번 말씀드린 내용으로 박스 포장기에서 "R" "S" 타입은 혼류 생산시 2단적재시 별도 Validation이 없어 완제품 창고로 투입이 가능합니다. 현재 "R" "S" 타입이 같이 적재되에 완재품으로 입고됬습니다. 참고 부탁드립니다. - 1단 : S102299 - 2단 : R999876 April 22, 2025 at 11:48 AM, Tklcz Alexandra SL/A : Please AGV 14 move April 22, 2025 at 11:48 AM, FA CS AGV Jawad : This message was deleted. April 22, 2025 at 11:48 AM, FA CS AGV Jawad : I do April 22, 2025 at 12:44 PM, 노영일 (Yeongil Noh) : 네 확인 감사합니다 April 22, 2025 at 4:17 PM, SKOH2/제조-셀,모듈 출하/김병호 : 북측 셀 도크장 GF 완제품 배출구 입구에 알람 발생하여 확인 부탁드립니다. April 22, 2025 at 4:17 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV036_M02 April 22, 2025 at 4:18 PM, FACS_Youngmin LEE : @SKOH2/제조-셀,모듈 출하/김병호 네 가고 있습니다. April 22, 2025 at 4:28 PM, FACS_Youngmin LEE : @SKOH2/제조-셀,모듈 출하/김병호 조치되었습니다. April 22, 2025 at 4:32 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 April 22, 2025 at 6:10 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 9+3/12 Tech, 1Sl Overtime(3): Hufnágel Dániel, Kasztel Balázs, Novák Zoltán Holiday(1): Czeilinger Krisztián Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós, Novák Zoltán --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Kasztel Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikuso April 22, 2025 at 6:30 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 22 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 22, 2025 at 10:41 PM, Nikolett SL/B EOL : Sziasztok Eol 9-10 előtt a GF bufferba egy AGV kiallt hibára kérlek gyertek Köszönöm April 22, 2025 at 10:42 PM, FA CS AGV David 데이비드 : Coming April 22, 2025 at 10:42 PM, Nikolett SL/B EOL : Elöjött ez a hiba a Boxpackingon April 22, 2025 at 10:42 PM, Denkó Jani (F.A.) : Megyünk April 22, 2025 at 10:44 PM, FA CS AGV David 데이비드 : Solved April 22, 2025 at 10:49 PM, Denkó Jani (F.A.) : Solved April 22, 2025 at 11:11 PM, FA CS AGV David 데이비드 : @Denkó Jani (F.A.) can you please come to module stk012_p10. Thanks April 22, 2025 at 11:15 PM, Boromisza Zoltán : Okey April 22, 2025 at 11:29 PM, Denkó Jani (F.A.) : Solved April 23, 2025 at 6:15 AM April 23, 2025 at 6:15 AM, R. József C SL EOL : @Zoltán Harasztia FA @Döme György F.A Sziasztok Üzemel a boxpacking April 23, 2025 at 6:16 AM, Döme György F.A : Hurrá🙂 April 23, 2025 at 8:01 AM, FACS_JaewonShin : ■ 23rd April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 23, 2025 at 8:34 AM, SKOH2/제조-셀,모듈 출하/김병호 invited ?. April 23, 2025 at 8:35 AM, SKOH2/제조-셀,모듈 출하/김병호 : . April 23, 2025 at 1:51 PM, R. József C SL EOL : Eolra nézzétek rá kérlek Nem érkezik paletta April 23, 2025 at 1:51 PM, Mohammad Amir : Checking April 23, 2025 at 1:51 PM, Mohammad Amir : Please tell me EOL line number . Thank you! April 23, 2025 at 1:53 PM, Mohammad Amir : We have received LR requests from line -5,6,9&10 successfully however currently there is no material available that's why pallet not arriving. Please let me know if you have any other questions. Thank you very much! April 23, 2025 at 2:13 PM, 한상범(Han Sang Beom) : EOL 5Line 공파레트 투입 안되어 라인 멈췄습니다. 확인 부탁드립니다. @FA April 23, 2025 at 2:14 PM, 조보행(CHO BO HAENG) : @배병민 (Bae Byoungmin) @이영혁 paul April 23, 2025 at 2:15 PM, Mohammad Amir : On job has been created Sir. Material on the way. Thank you! April 23, 2025 at 2:15 PM, Mohammad Amir : One** April 23, 2025 at 2:15 PM, 배병민 (Bae Byoungmin) : This message was deleted. April 23, 2025 at 2:16 PM, Mohammad Amir : Sir, You are facing this scenario cause there is no transferable material available according to RTD rule. As soon as materials will be available jobs will be created. Thank you very much! April 23, 2025 at 2:17 PM, 배병민 (Bae Byoungmin) : 금일 셀버퍼 창고에서 EOL 라인 자동투입 개선건으로 MES 배포 및 테스트 진행 있습니다. 이부분으로 영향받는건 아닌지 확인 부탁드립니다 April 23, 2025 at 2:17 PM, 배병민 (Bae Byoungmin) : 공공팔레트 자동투입 개선건입니다 April 23, 2025 at 2:18 PM, 한상범(Han Sang Beom) : EOL 5Line Packing으로 이동중인 AGV#16 확인 하였습니다. April 23, 2025 at 2:19 PM, Mohammad Amir : As of now , Transferable Materials are available. So you will not face such issue from now on. Currently available Pallets:- EOL line 5&6-1406 EOL line 9 &10 -168. Thank you! April 23, 2025 at 2:20 PM, Mohammad Amir : Yes Sir, We are monitoring the process. Thank you very much! April 23, 2025 at 2:21 PM, 이영혁 paul : 업데이트 완료 하고 반송 진행 모니터링중에 있습니가 April 23, 2025 at 2:22 PM, Mohammad Amir : @R. József C SL EOL For you information, Now jobs have been created for all producing line-5,6,9,10. ✅ Thank you very much! April 23, 2025 at 2:41 PM, 한상범(Han Sang Beom) : @FA Please check AGV#15 ACS Alive Alarm April 23, 2025 at 2:41 PM, FA-CS-AGV-Masoud : Coming April 23, 2025 at 2:43 PM, FA-CS-AGV-Masoud : Solved April 23, 2025 at 3:03 PM, FA-CS-AGV-Masoud : @fa Please check M0STK011_P05 Fork right collapse detect April 23, 2025 at 3:05 PM, Mohammad Amir : @Döme György F.A Please check this issue M0STK011_C01 have crane fork right collapsed detect 1 Error and it is delaying jobs for E0L#5. Thank you! April 23, 2025 at 3:21 PM, Mohammad Amir : Sir @한상범(Han Sang Beom) Currently available Pallets for EOL:- EOL 4&5&6 -1402 EOL 9 & 10 -165 Now process is has been normalized ✅. Thank you very much! April 23, 2025 at 4:24 PM, R. József C SL EOL : Gyertek kérlek eol 6 14es agv hiba Paletta van adat nincs April 23, 2025 at 4:25 PM, FA-CS-AGV-Masoud : Coming April 23, 2025 at 4:25 PM, R. József C SL EOL : No please Korean kollega solved April 23, 2025 at 4:34 PM, Herceg Sándor SSL/C : Sziasztok! Cell Buffer 3 MCP Raxk To Rack CV 3-5 light curtain detect error -MCP 0140MC03,MC04 On Inverter apowet És több cv Inverter fault hibával jelez. Kérlek nézzetek rá April 23, 2025 at 5:18 PM, Halász György SL : Hi, Modul GF line3 blok1cell not arrive from wearhause. Thanks April 23, 2025 at 5:21 PM, Mohammad Amir : Hello , Issue has been resolved ✅, For M3MFA300_P01 material is on the way. I am monitoring the process. Thank you very much! April 23, 2025 at 5:23 PM, Mohammad Amir : AGV#8 on the way ✅. Thank you! April 23, 2025 at 5:28 PM, Mohammad Amir : Carrier T704454 has successfully arrived by AGV#8 at 17:27 . ✅ Thank you very much! April 23, 2025 at 5:46 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil PM님 하기와 같이 1F 모듈 샘플 생산 일정이 계획되어 있습니다. 샘플 생산 시 AGV 운영계획입니다. 자재 배치 및 지게차 운영에 참고부탁드립니다 모듈 8line 샘플 생산 일정 4/24 4P10S-S 165ea 4/26 4P10S-R 165ea 4/28 4P8S 83ea April 23, 2025 at 5:52 PM, 노영일 (Yeongil Noh) : 네피엠님 11 12라인은 안오게 막아둔거죠? April 23, 2025 at 5:54 PM, 배병민 (Bae Byoungmin) : 넵 그쪽은 자재 확인되어서 노드 막아뒀습니다 April 23, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Novák Károly, Kasztel Balázs, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 23, 2025 at 6:47 PM, Őri Imre : Sziasztok! Modul 3 sorra nem jön alapanyag (cella)! Úgy látom hátul egy nagy AGV bőszen villog! Még tudnátok nézni? Köszönöm! April 23, 2025 at 6:47 PM, N.Gábor F.A. : Meg nézzük April 23, 2025 at 7:17 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 23 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 23, 2025 at 8:00 PM, Éváné Bori Viktória : Eol 9-10 AGV 10, 12 please check April 23, 2025 at 8:01 PM, Muneeb Ur Rehman : Checking April 23, 2025 at 8:03 PM, Muneeb Ur Rehman : Fixed April 23, 2025 at 8:19 PM, Szijjártó Balázs : Modul Line 3, small AGV error. April 23, 2025 at 8:19 PM, Muneeb Ur Rehman : Checking April 23, 2025 at 8:25 PM, Muneeb Ur Rehman : Fixed April 23, 2025 at 9:12 PM, Őri Imre : 3 sor végén megált a nagy AGV. Meg tudnátok nézni? April 23, 2025 at 9:12 PM, Muneeb Ur Rehman : Checking April 23, 2025 at 9:15 PM, Muneeb Ur Rehman : Fixed April 23, 2025 at 9:32 PM, Czébely Dániel SL—D : Hello, the 14,12 AGVs are not suitable for pallets. Please send these to the buffer warehouse. April 23, 2025 at 9:40 PM, VK (mcs) : @Jun(정우준)_SKOH FA Can you please delete current jobs for AGV 14 and 12 in ACS ? Then I will transfer them to STK. April 23, 2025 at 9:46 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA kindly do it because the AGVs are blocking the way for other AGVs and manual input April 23, 2025 at 9:49 PM, Jun(정우준)_SKOH FA : wait April 23, 2025 at 9:50 PM, Jun(정우준)_SKOH FA : which AGV? April 23, 2025 at 9:51 PM, Muneeb Ur Rehman : 12 and 14 April 23, 2025 at 9:51 PM, Jun(정우준)_SKOH FA : Can I delete the current job? April 23, 2025 at 9:52 PM, Muneeb Ur Rehman : Yes please. We need to return these agv to stl April 23, 2025 at 9:52 PM, Muneeb Ur Rehman : Stk April 23, 2025 at 9:52 PM, Jun(정우준)_SKOH FA : deleted it. April 23, 2025 at 9:53 PM, Muneeb Ur Rehman : Thank you April 23, 2025 at 9:56 PM, VK (mcs) : Done April 23, 2025 at 9:56 PM, 노영일 (Yeongil Noh) : @박태영 @이영혁 paul 안녕하세요 피엠님 매니저님 밤늦게 죄송한데 5,6라인 공파레트 고정반송 변경이 지금 좀 필요합니다... (명일 출하수량 맞춰야하는 이슈) T->R 변경 요청 드립니다... 관련 메일링은 잠시후 드리겠습니다 April 23, 2025 at 9:58 PM, Éváné Bori Viktória : Only the blue palette !!!! We want ivory!!!! Check please!!!!! AGV 11,10!!! April 23, 2025 at 9:59 PM, 김주연 : @이영혁 paul 부장님, 변경 후 카톡방 공유 부탁드립니다. 이번주 박태영피엠님 부재로, FA운영팀 김주연pm 쪽에 요청주시면됩니다. April 23, 2025 at 9:59 PM, Muneeb Ur Rehman : Checking April 23, 2025 at 10:04 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA Agv 11 with carrier id T704324 and AGV 17 with carrier ID T704297. Please delete the job as well April 23, 2025 at 10:04 PM, Muneeb Ur Rehman : They do no want blue pallets April 23, 2025 at 10:07 PM, 박태영 : 노영일PM님 이 건은 오늘 자동으로 변경하는 것으로 적용 완료 되었습니다 April 23, 2025 at 10:08 PM, Jun(정우준)_SKOH FA : done April 23, 2025 at 10:08 PM, Muneeb Ur Rehman : Thank you April 23, 2025 at 10:09 PM, 박태영 : @준용 MES UI 에 셋팅할수 있도록 오픈되어있을것 같은데 설명해주실 수 있나요 April 23, 2025 at 10:10 PM, 노영일 (Yeongil Noh) : 오늘 배포하고 1단파레트 반송 테스트 중에 mcs 에러나서 내일 다시 테스트 하는걸로 했습니다 April 23, 2025 at 10:11 PM, 노영일 (Yeongil Noh) : 그래서 오늘은... 해당 기능 사용이 어려울 것 같고 RTD에서 바꿔주는게 맞지 않을까...합니다 April 23, 2025 at 10:17 PM, Éváné Bori Viktória : AGV 12, 14 Blue palette is in EOL 5-6 please move!!!! April 23, 2025 at 10:17 PM, Muneeb Ur Rehman : Checking April 23, 2025 at 10:18 PM, 박태영 : MCS 까지는 정상적으로 명령이 내려갔지만 SCS 에서 반송이 늦어져서 테스트가 완료되진 않은 상태네요.. 적용은 되어있는 상태이니 mes에서 기준정보 변경 후 잘 들어가는지 상태 함께보면 될것 같습니다 April 23, 2025 at 10:19 PM, 박태영 : @준용 @김성식 MES UI에서 수정하고 변경되는것 함께 모니터링 가능합니까 April 23, 2025 at 10:20 PM, 박태영 : 1단 팔레트 스토커에 있는지 좀 확인부탁드립니다 April 23, 2025 at 10:22 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA Please delete the job agv 12 and 14 April 23, 2025 at 10:28 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA. I’m waiting for your assistance in deleting the job from AGV 12 and 14. Kindly do it at your earliest. April 23, 2025 at 10:29 PM, Jun(정우준)_SKOH FA : okay I will April 23, 2025 at 10:30 PM, Jun(정우준)_SKOH FA : agv 14 have 2 jobs. which one should I delete? April 23, 2025 at 10:31 PM, Muneeb Ur Rehman : It has pallets. They don’t need these pallets. We want to send these pallets back to the Stk. April 23, 2025 at 10:32 PM, VK (mcs) : Job with destination F5CPM010-P01 April 23, 2025 at 10:32 PM, Muneeb Ur Rehman : Yes delete it April 23, 2025 at 10:33 PM, Jun(정우준)_SKOH FA : done April 23, 2025 at 10:33 PM, Muneeb Ur Rehman : Thank you so much April 23, 2025 at 10:34 PM, 노영일 (Yeongil Noh) : 네 잠시만요 피엠님 April 23, 2025 at 10:42 PM, Éváné Bori Viktória : AGV 13-15 in line 5-6 with blue palette April 23, 2025 at 10:43 PM, 준용 : @박태영 @노영일 (Yeongil Noh) 피엠님 금일 배포에 관한 부분에 대해서 전부분 테스트가 되었으며 1단 트레이 출고에 대해서 명일 다시 테스트 이어가기로 이야기 되었습니다. April 23, 2025 at 10:45 PM, 원승연(Seungyeon Won) : Do not switch the AGV mode. Use AGV mode only for the output conveyor. April 23, 2025 at 10:56 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA please delete job. AGV 13 and 15 April 23, 2025 at 10:57 PM, Jun(정우준)_SKOH FA : done April 23, 2025 at 11:11 PM, Muneeb Ur Rehman : @Jun(정우준)_SKOH FA please delete job of AGV 15 April 23, 2025 at 11:13 PM, Jun(정우준)_SKOH FA : done April 23, 2025 at 11:15 PM, 노영일 (Yeongil Noh) : @박태영 @준용 혹시 R plt 반송 관련 얘기되셨을까요? April 23, 2025 at 11:15 PM, 박태영 : 정리중인데 잘 들어가는지 함께 모니터링은 필요합니다 April 23, 2025 at 11:17 PM, Muneeb Ur Rehman : Hello. Please change the pallet type in the system. AGVs are continuously sending blue pallets April 23, 2025 at 11:18 PM, Éváné Bori Viktória : In AGV mode commin blue palette!!!!!! April 23, 2025 at 11:18 PM, Muneeb Ur Rehman : They do not need blue pallets at all. Please change the pallet type. This is making problem now. April 23, 2025 at 11:18 PM, 준용 : 내용정리되었고 정보변경완료되는대로 공유드리겠습니다 April 23, 2025 at 11:20 PM, 원승연(Seungyeon Won) : 투입부 Manual 모드 전환했으나 계속 T파레트 투입부로 입고됩니다. April 23, 2025 at 11:22 PM, VK (mcs) : Unfortunately I have not permission to change the pallets type. April 23, 2025 at 11:23 PM, 준용 : 변경완료하였습니다 April 23, 2025 at 11:25 PM, Muneeb Ur Rehman : They are doing it manually. Same pallets are coming again n Gaian with same serial number. So now pallets are being removed manually April 23, 2025 at 11:25 PM, 이영혁 paul : rtd에서 반송랏 R타입 조회 됩니다 April 23, 2025 at 11:25 PM, 이영혁 paul : 확인부탁드립니다 April 23, 2025 at 11:26 PM, 이영혁 paul : 변경되었습니다 확인 부탁드립니다 April 23, 2025 at 11:27 PM, Muneeb Ur Rehman : Waiting and will inform then April 23, 2025 at 11:27 PM, VK (mcs) : As I checked rule is changed and now R type pallets will be delivered. Thx April 23, 2025 at 11:29 PM, 노영일 (Yeongil Noh) : @원승연(Seungyeon Won) R로 반송 잡혔는지 봐주세요 April 23, 2025 at 11:31 PM, 이영혁 paul : mcs에서는 5-6라인에 r타입 반송잡 생성되었습니다 April 23, 2025 at 11:33 PM, 원승연(Seungyeon Won) : 현장 R팔레트 정상 반송 중입니다 April 23, 2025 at 11:39 PM, 준용 : 이후 파렛트 모델변경 필요하신경우 연락주시면 대응하겠습니디. April 23, 2025 at 11:40 PM, 노영일 (Yeongil Noh) : @박태영 @준용 늦은시간에도 신속한 대응 감사 드립니다 피엠님 매니저님 내일 파레트 타입설정 메뉴 권한 부탁 드리고, 테스트 진행하시죠. April 23, 2025 at 11:40 PM, 준용 : 넵 April 24, 2025 at 4:13 AM April 24, 2025 at 4:13 AM, 원승연(Seungyeon Won) : Plz check AGV 11 Thanks! @AGV April 24, 2025 at 4:13 AM, 원승연(Seungyeon Won) : Sorry AGV 10 April 24, 2025 at 4:13 AM, Muneeb Ur Rehman : Checking April 24, 2025 at 4:17 AM, Muneeb Ur Rehman : Fixed April 24, 2025 at 6:20 AM, R. József C SL EOL : Sziasztok Segítséget kérnék boxpackingra April 24, 2025 at 6:20 AM, R. József C SL EOL : Köszönöm April 24, 2025 at 6:22 AM, Döme György F.A : Szia.Hamarosan érkezek elektródáról April 24, 2025 at 6:23 AM, R. József C SL EOL : Köszönöm April 24, 2025 at 7:18 AM, FACS_JaewonShin : ■ 24th April Ivancsa FA CS - Withes service Daily(07:30 - 17:30) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 24, 2025 at 8:43 AM, Halász György SL invited Balázs Róbert SL and Reisz Tibor. April 24, 2025 at 8:43 AM, Balázs Róbert SL : . April 24, 2025 at 8:47 AM, R. József C SL EOL : Kérnék segítséget boxpackingra Köszönöm April 24, 2025 at 8:48 AM, Döme György F.A : Nemsokára érkezek April 24, 2025 at 8:53 AM, R. József C SL EOL : Köszönöm April 24, 2025 at 10:22 AM, 요셉 : eol 4L empty pallet does not come in check plz April 24, 2025 at 10:24 AM, Döme György F.A : Coming April 24, 2025 at 10:31 AM, Döme György F.A : @MCS Could you please check why it’s not bringing a pallet to EOL4? April 24, 2025 at 10:33 AM, duzzaman Md (MCS) : On it April 24, 2025 at 10:41 AM, duzzaman Md (MCS) : New job has been created. Material on the way. Thank you April 24, 2025 at 10:43 AM, Döme György F.A : Thank you very much! April 24, 2025 at 10:47 AM, Duna Don : Thank you AGV#15 is on the way now April 24, 2025 at 10:49 AM, duzzaman Md (MCS) : You're welcome. The previous job has already been completed at 10:47 April 24, 2025 at 11:20 AM, SKOH2/제조-셀,모듈 출하/김병호 : 남측 셀 도크장 1F에서 리프트 전단에 RTV에서 제품이 정지상태입니다. 알람은 없는데 확인 부탁드립니다. 금일 출하 작업 진행중이라 빠른 확인 부탁드립니다 April 24, 2025 at 11:23 AM, FACS_Youngmin LEE : 가고 있습니다. April 24, 2025 at 11:31 AM, FACS_Youngmin LEE : 해결되었습니다. @SKOH2/제조-셀,모듈 출하/김병호 April 24, 2025 at 11:31 AM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 April 24, 2025 at 1:53 PM, 배병민 (Bae Byoungmin) : @duzzaman Md (MCS) There is no return command even if pallet LR is performed at EOL 4Line PO_02 port. Check if the job has been created. Pallet ID : T703848 April 24, 2025 at 1:53 PM, duzzaman Md (MCS) : On it April 24, 2025 at 1:57 PM, duzzaman Md (MCS) : UR has been received. But the same carrier exists in M0STK014 UNIT 0202202 Thus it shows, Carrier location missmatch error in our side . Thanks April 24, 2025 at 2:01 PM, 배병민 (Bae Byoungmin) : @이영혁 paul 부장님 안녕하세요 혹시 해당건 자세히 히스토리 알수있을까요? 4번창고 화물이 있는 Rack으로 또다시 반송 명령이 주어진 것인가요? April 24, 2025 at 2:04 PM, 이영혁 paul : 찾아보겠습니다 April 24, 2025 at 2:07 PM, 김주연 : 4라인 p02 에 잇는 캐리어가 T703848이 맞는지 확인필요합니다 April 24, 2025 at 2:08 PM, 배병민 (Bae Byoungmin) : 네 맞습니다 April 24, 2025 at 2:09 PM, 이영혁 paul : 로그상은 p01에서 위치보고한게 마지막입니다 April 24, 2025 at 2:13 PM, FACS_TaehyeongJin : This message was deleted. April 24, 2025 at 2:13 PM, 이영혁 paul : UR has been received. But the same carrier exists in M0STK014 UNIT 0202202 Thus it shows, Carrier location missmatch error in our side ….. 이 메시지는 잘못보냈답니다 April 24, 2025 at 2:18 PM, 이영혁 paul : T705140 캐리어가 ur 요청받고 실패한 메시지를 오독해서 카톡방에 올렸습니다 참고하시기 바랍니다 April 24, 2025 at 2:20 PM, 배병민 (Bae Byoungmin) : 넵 알겠습니다 감사합니다 April 24, 2025 at 2:27 PM, 신해석 : T703848 agv에서 정상적으로 투입 됐고 p02에서 대기 중 입니다. @이영혁 paul April 24, 2025 at 2:41 PM, 이영혁 paul : 로케이션 변경되었고 ur 메시지 주시면 반송되는지 확인하겠습니다 April 24, 2025 at 2:43 PM, 이영혁 paul : ur 메시지는 기존 t705140으로 발생했습니다 April 24, 2025 at 2:46 PM, 이영혁 paul : agv ur 메시지에 해당 캐리어 업데이트가 안되었나봅니다 April 24, 2025 at 2:48 PM, 이영혁 paul : 잡 만들어졌습니다 April 24, 2025 at 3:24 PM, 신해석 : 6Line cell packing empty pallet 투입 안되고 있습니다. 확인 부탁드립니다. @이영혁 paul April 24, 2025 at 3:29 PM, 이영혁 paul : 6라인에 T704308 반송중입니다 April 24, 2025 at 3:31 PM, 신해석 : 혹시 원인 좀 설명해 주실 수 있으실까요? April 24, 2025 at 3:42 PM, R. József C SL EOL : Eol 9-es sorra nem hoz üres palettákat Nézzétek meg kérlek Valamint eol 9-es sor elől küldjétek el az agv-t Manuálisan teszünk fel 2 palettát April 24, 2025 at 3:43 PM, 이영혁 paul : 13시 이후로 6라인 LR 실패한건 없는걸로 나옵니다 April 24, 2025 at 3:43 PM, Döme György F.A : 3-mas raktárból már szedi ki a sorra April 24, 2025 at 3:45 PM, 이영혁 paul : 13시 58분까지 S팔레트 반송 그리고 14시50분경 T 팔레트로 변경처리되었습니다 April 24, 2025 at 3:48 PM, duzzaman Md (MCS) : AGV 11 is there. Thanks . Monitoring further. April 24, 2025 at 5:20 PM, R. József C SL EOL : Eol 10-es sorra nem hozza a palettákat Nézzétek meg kérlek April 24, 2025 at 5:30 PM, R. József C SL EOL : Please April 24, 2025 at 5:30 PM, R. József C SL EOL : Eol 9-es sor előtt áll az agv Paletta rajta, adat nincs April 24, 2025 at 5:30 PM, FA/CS/AGV/Taimur : Checking April 24, 2025 at 5:32 PM, FA/CS/AGV/Taimur : Solved. April 24, 2025 at 5:32 PM, R. József C SL EOL : Thanks April 24, 2025 at 5:35 PM, duzzaman Md (MCS) : There's already a material on P01 A job already exists with the carrier Z301234 Thanks April 24, 2025 at 6:18 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Novák Zoltán, Nagy Zsolt, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 24, 2025 at 7:10 PM, Éváné Bori Viktória : Why not comming the palettes???!!! You said they were coming. The lines stays!!! April 24, 2025 at 7:11 PM, 원승연(Seungyeon Won) : 팔레트가 안오고 있습니다. 10분뒤 생산 멈춥니다. 확인 부탁드리겠습니다. The pallets haven’t arrived yet. Production will stop in 10 minutes. Please check and confirm. April 24, 2025 at 7:11 PM, N.Gábor F.A. : Szia Nagyobb baj van a raktárakkal amin éppen dolgozunk Nem tudni meddig tart még az elhárítás de igyekszünk meg oldani April 24, 2025 at 7:12 PM, VK (mcs) : STK 13 and 14 are OoS. April 24, 2025 at 7:15 PM, Muneeb Ur Rehman : @FA Please check STK M0STK013-STK-OP#3 April 24, 2025 at 7:20 PM, N.Gábor F.A. : I need help with STK013 SEW C2 error. April 24, 2025 at 7:21 PM, 원승연(Seungyeon Won) : 5,6라인 비가동을 방지하기 위해 지게차 투입 진행하겠습니다. April 24, 2025 at 7:26 PM, 배병민 (Bae Byoungmin) : 저희쪽 인원 곧 현장가겠습니다 April 24, 2025 at 7:36 PM, FACS_JaewonShin : 현장 가는 중입니다. April 24, 2025 at 7:37 PM, Szijjártó Balázs : AGV does not bring dunnage for Modul Line 3! April 24, 2025 at 7:37 PM, N.Gábor F.A. : Lehasalt a raktár Bizonytalan ideig nem fog érkezni anyag Rajta vagyunk a megoldáson April 24, 2025 at 7:38 PM, 원승연(Seungyeon Won) : 감사합니다 정상화되면 AGV모드 전환하겠습니다 April 24, 2025 at 7:38 PM, Szijjártó Balázs : Oksa, kösz az infót! April 24, 2025 at 7:42 PM, Éváné Bori Viktória : EOL 5 AGV 16 move!!!! April 24, 2025 at 7:51 PM, Muneeb Ur Rehman : Done April 24, 2025 at 8:28 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 금일 심정민PM님께는 공유는 드린사항으로 EOL 1단 공공팔레트 생산은 아직 진행 불가합니다. 센서조정등 필요하며 추가 사고 발생에대한 검토부분이 있어 재협의가 필요한부분입니다. 명일 해당 부분 정리하여 공유드리겠습니다 April 24, 2025 at 8:43 PM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) 1단 팔레트 자동 투입 중지 부탁드립니다. April 24, 2025 at 8:57 PM, 원승연(Seungyeon Won) : 알겠습니다 April 24, 2025 at 8:58 PM, 원승연(Seungyeon Won) : @정낙정(JEONG NAK JEONG) April 24, 2025 at 9:26 PM, 노영일 (Yeongil Noh) : @정낙정(JEONG NAK JEONG) @신해석 이거 어떤상황인건가요? April 24, 2025 at 9:31 PM, 정낙정(JEONG NAK JEONG) : 주간에 4라인 테스트용으로 1단짜리 base pallet가 버퍼에 투입되었었습니다. 5, 6라인 정규 생산시에는 1단 base pallet 자동투입기능 사용하지 않고 있습니다. April 24, 2025 at 9:36 PM, 신해석 : 4Line 포장기에 pallet model 변경 후 pallet 1단 입출고 cycle 까지는 확인 됐습니다. 내일 pallet 입출고 cycle돌리면서 추가적으로 확인 할 예정입니다. 그리고 stacker crane 내부 센서 세팅이 23단 pallet 기준으로 세팅 돼 있어 센서 위치 조정 또한 필요합니다. @노영일 (Yeongil Noh) April 24, 2025 at 9:41 PM, 노영일 (Yeongil Noh) : 네 확인 감사합니다 지금은 23단만 들어가게 돼있죠? 1단때문에 라인 섰나해서요 April 24, 2025 at 9:47 PM, 신해석 : 4Line 외 다른 설비들은 test 중인 plc 적용 돼 있지 않아서 23단 Pallet로 정상적으로 투입 될 것 같습니다. April 24, 2025 at 9:51 PM, 배병민 (Bae Byoungmin) : PM님 혹시 셀버퍼 창고에 투입되어있는 1단 Base PLT 있으시면 SCS에서 Rack 비사용 부탁드립니다. April 24, 2025 at 9:52 PM, Szijjártó Balázs : AGV does not bring dunnage for Modul Line 3!Again! April 24, 2025 at 9:53 PM, Muneeb Ur Rehman : On its way April 24, 2025 at 9:55 PM, 원승연(Seungyeon Won) : 지금 버퍼창고 4번에서 발생한 문제는 통신문제인가요? April 24, 2025 at 10:12 PM, Éváné Bori Viktória : Eol, AGV 18 ACS alive alarm please check. April 24, 2025 at 10:13 PM, Muneeb Ur Rehman : Checking April 24, 2025 at 11:31 PM, Szijjártó Balázs : This message was deleted. April 24, 2025 at 11:33 PM, Szijjártó Balázs : We should move the AGV away from the line. April 25, 2025 at 12:17 AM April 25, 2025 at 12:17 AM, Őri Imre : 8 Line. Kellene kicsi segítség a upc gentryhez April 25, 2025 at 12:17 AM, Őri Imre : Köszönöm April 25, 2025 at 12:22 AM, N.Gábor F.A. : Megyek April 25, 2025 at 12:27 AM, 원승연(Seungyeon Won) : We need to use 10 R-pallets located in Buffer Warehouse No. 4 during the night shift today. We expect the issue to be resolved by 4 PM. When do you think it will be fixed? @FA April 25, 2025 at 12:32 AM, N.Gábor F.A. : We will do our best to keep the warehouse running, but if we are unable to resolve the issue, the day team will arrive at 8 AM and take action. April 25, 2025 at 12:40 AM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) 야간에 조치가 좀 어려운 상황인거 같습니다. 야간에 4번 창고 가동불가시에 "R" 팔레트 대체품이 있으실까요? April 25, 2025 at 12:40 AM, 배병민 (Bae Byoungmin) : 안되면 제가 새벽이라도 출근하겠습니다 April 25, 2025 at 12:41 AM, 원승연(Seungyeon Won) : 다른 계획은 없습니다. 10파레트는 수동배출해서 정보 삭제는 가능할까요? April 25, 2025 at 12:41 AM, 원승연(Seungyeon Won) : 저희가 지게차 투입하겠습니다 April 25, 2025 at 12:43 AM, 배병민 (Bae Byoungmin) : 4번창고 크레인 문제라 4번창고에있는 해당 팔레트 수동출고가 어려운 부분일꺼 같습니다. 다른 창고는 문제 없을꺼 같습니다 April 25, 2025 at 12:47 AM, 원승연(Seungyeon Won) : 우선 3번 버퍼에 있는 R파레트로 가동 하겠습니다. 아마 4시 30분까지 가동 가능할 것 같습니다. 제가 생산 계획을 변경할 수가 없어서 T 파레트 전환 유무에 대해 문의해보겠습니다. April 25, 2025 at 12:48 AM, 원승연(Seungyeon Won) : @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) April 25, 2025 at 12:51 AM, 배병민 (Bae Byoungmin) : 네 감사합니다 변동 사항시 연락주시면 현장대응 하겠습니다 April 25, 2025 at 1:15 AM, Őri Imre : 8 sornál a magas raktárból kijövő raklap elakadt April 25, 2025 at 1:15 AM, Őri Imre : Illetve ismert gond van a gentry betöltessel April 25, 2025 at 1:15 AM, Őri Imre : Meg tudnátok nézni April 25, 2025 at 1:16 AM, Őri Imre : Kis AGV elakadt betöltés közben April 25, 2025 at 1:28 AM, Éváné Bori Viktória : EOL 5 AGV 15 PIO unloading 11 valid L reg time over alarm. Please check April 25, 2025 at 1:29 AM, Muneeb Ur Rehman : Checking April 25, 2025 at 1:34 AM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 24 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 25, 2025 at 1:52 AM, Őri Imre : 8 sor elején nagy AGV idő túlépés miatt áll. Hiába indítom újra pár ms után újra hibát jelez! April 25, 2025 at 1:52 AM, Őri Imre : Meg tudnátok nézni? April 25, 2025 at 1:52 AM, Őri Imre : Köszönöm April 25, 2025 at 1:53 AM, Muneeb Ur Rehman : Checking April 25, 2025 at 3:02 AM, Őri Imre : 8 sor Block2 be nem érkezik cella! Meg tudnátok nézni? April 25, 2025 at 3:02 AM, Őri Imre : Köszönöm April 25, 2025 at 3:05 AM, N.Gábor F.A. : Jahp April 25, 2025 at 3:23 AM, Őri Imre : 8 sorra nem hoz üres dunnaget az AGV. Meg tudnátok nézni? Köszönöm April 25, 2025 at 3:28 AM, VK (mcs) : This message was deleted. April 25, 2025 at 3:28 AM, VK (mcs) : @FA Please check AGV 5 April 25, 2025 at 3:42 AM, Muneeb Ur Rehman : Fixed April 25, 2025 at 4:07 AM, Őri Imre : AGV 5 leállt félúton. Várjuk az üres dunnaget. Nézzétek rá pls! April 25, 2025 at 4:07 AM, Őri Imre : Thx. April 25, 2025 at 4:08 AM, Őri Imre : 8as sor elején pedig nem viszi el az üres tálcákat April 25, 2025 at 4:09 AM, Muneeb Ur Rehman : Checking April 25, 2025 at 7:10 AM, Tklcz Alexandra SL/A : Hi! Please move AGV5. April 25, 2025 at 7:18 AM, FA/CS/AGV/Taimur : Sure, coming April 25, 2025 at 7:47 AM, 요셉 : Eol 5-line empty pallet is not coming in. Check plz April 25, 2025 at 7:53 AM, duzzaman Md (MCS) : M0STK014 Cranes are OOS. It'd be going as soon as it gets back to service. Thanks April 25, 2025 at 7:54 AM, 요셉 : Please move the agv in front of eol 5 line to the side. Thank you April 25, 2025 at 7:54 AM, Avacz Beáta : Sziasztok 8 as sor elejéről nem visszi el az SGV az üres palettákat a sor emiatt áll April 25, 2025 at 7:55 AM, Avacz Beáta : Nézzétek meg légyszi mi lehet a baj. Köszi April 25, 2025 at 7:55 AM, Duna Don : Checking April 25, 2025 at 7:56 AM, 배병민 (Bae Byoungmin) : I've processed the warehouse 4. Please check if the return is normal. April 25, 2025 at 7:59 AM, duzzaman Md (MCS) : Yes, job request was successful at 7.55 Carrier T704315 is going. Thank you April 25, 2025 at 8:02 AM, Duna Don : Done April 25, 2025 at 8:04 AM, duzzaman Md (MCS) : Job has been completed. Thanks April 25, 2025 at 8:07 AM, 정낙정(JEONG NAK JEONG) : @배병민 (Bae Byoungmin) 박스포장설비 1단밴딩기 멈춰있는 상태입니다. 확인부탁드리겠습니다. April 25, 2025 at 8:09 AM, 배병민 (Bae Byoungmin) : 네 잠시만요 April 25, 2025 at 8:13 AM, FACS_JaewonShin : ■ 25th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 25, 2025 at 8:19 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 25, 2025 at 8:32 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @심정민 (Shim Jungmin) 셀버퍼 4번창고 정상화 되었습니다 가동중입니다 April 25, 2025 at 11:05 AM, 요셉 invited 김대은. April 25, 2025 at 12:41 PM, Tklcz Alexandra SL/A : Please move AGV 17 EOL. April 25, 2025 at 12:41 PM, 박광희(Park kwang hui) invited 송태용(Song tae yong). April 25, 2025 at 12:42 PM, Duna Don : On my way April 25, 2025 at 12:47 PM, Duna Don : AGV is now moving to MOSTK011_P05. Thanks April 25, 2025 at 12:47 PM, Tklcz Alexandra SL/A : Thanks! April 25, 2025 at 12:50 PM, Tklcz Alexandra SL/A : EOL AVG 14 and 10 move.😅 April 25, 2025 at 12:50 PM, Duna Don : Coming April 25, 2025 at 12:50 PM, Tklcz Alexandra SL/A : They cry outside the lift. April 25, 2025 at 12:51 PM, Duna Don : Okay checking April 25, 2025 at 12:53 PM, Duna Don : Solved April 25, 2025 at 2:20 PM, Tklcz Alexandra SL/A : Please move AGV17 EOL. April 25, 2025 at 2:20 PM, Duna Don : Coming April 25, 2025 at 2:23 PM, Duna Don : Done April 25, 2025 at 4:59 PM, 요셉 : Eol agv#11 check plz April 25, 2025 at 4:59 PM, Duna Don : Checking April 25, 2025 at 5:02 PM, Duna Don : Solved April 25, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+2/12+1 Tech, 1Sl Overtime(2): Novák Zoltán, Zsurbej Zsolt Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Zsurbej Zsolt --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Novák Zoltán --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása vált April 25, 2025 at 6:21 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 25 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 25, 2025 at 7:18 PM, Horváth László SL/B : Please check the 13# AGV at EOL. Thank you. April 25, 2025 at 7:19 PM, FA CS AGV David 데이비드 : Checking April 25, 2025 at 7:30 PM, FA CS AGV David 데이비드 : There were pallets nearby being detected as obstacles but they've been removed now April 25, 2025 at 7:30 PM, Horváth László SL/B : Thanks , Thanks April 25, 2025 at 8:59 PM, Nikolett SL/B EOL : Sziasztok Boxpacking nem teszi rá a palettára a tetőt valaki tudna menni ? Köszönöm April 25, 2025 at 8:59 PM, Denkó Jani (F.A.) : Megyünk April 26, 2025 at 2:43 AM April 26, 2025 at 2:43 AM, Horváth László SL/B : Check plz Cell Buffer#4 Rack Pozition Not Detect error Tank you @Boromisza Zoltán @Denkó Jani (F.A.) April 26, 2025 at 4:12 AM, Nikolett SL/B EOL : Sziasztok GF Buffer Smc 2 rack position not detect error Hibára állt ki Tudna valaki jönni és megnézni? Köszönöm April 26, 2025 at 4:17 AM, Denkó Jani (F.A.) : Solved April 26, 2025 at 5:04 AM, Nikolett SL/B EOL : Eol 9 előtt a 15 os számú agv útba van tudna valaki jönni? April 26, 2025 at 5:05 AM, FA CS AGV David 데이비드 : Ok coming April 26, 2025 at 5:05 AM, Boromisza Zoltán : Megyek April 26, 2025 at 5:10 AM, FA CS AGV David 데이비드 : Done April 26, 2025 at 7:46 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK014_C01/C02 there is MCP SMC#2 Disconnected Error since 7:37. Thank you very much! April 26, 2025 at 8:01 AM, Csepi Árpád : Solved April 26, 2025 at 8:06 AM, Mohammad Amir : Thank you very much! April 26, 2025 at 2:42 PM, Tklcz Alexandra SL/A : Please check EOL GF buffer 3. Error. April 26, 2025 at 3:12 PM, Csepi Árpád : Solved April 26, 2025 at 3:46 PM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK014_C01 there is MCP SMC#2 Disconnected Error. Thank you! April 26, 2025 at 3:51 PM, Csepi Árpád : Solved April 26, 2025 at 3:52 PM, Mohammad Amir : Thank you very much! April 26, 2025 at 5:32 PM, Tklcz Alexandra SL/A : Please someone check boxpacking error. PC problem. April 26, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 26, 2025 at 6:26 PM, Nikolett SL/B EOL : Sziasztok a GF bufferba 1 palettát nem hoz ki Valaki tudna jönni.? 😄 April 26, 2025 at 6:27 PM, Nikolett SL/B EOL : 1 Bufferba van a paletta April 26, 2025 at 6:31 PM, Nikolett SL/B EOL : Boxpacking Ou4u21 Label PCNNo respon hiba még mindig fentáll kérlek gyertek Köszönöm April 26, 2025 at 6:34 PM, Denkó Jani (F.A.) : Megyünk mindenhova is 🫡 April 26, 2025 at 6:58 PM, Denkó Jani (F.A.) : @Mohammad Amir @Shahbaz 샤바즈 MCS/RTD Helló . Please do a task. I would like to request a palette M0STK011, Z301366 for the port M0STK011_M01. April 26, 2025 at 6:58 PM, Denkó Jani (F.A.) : Thank you April 26, 2025 at 7:00 PM, Denkó Jani (F.A.) : Megvan 😁 April 26, 2025 at 7:00 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created. April 26, 2025 at 7:00 PM, Denkó Jani (F.A.) : Thank you, paletta is coming 🤝 April 26, 2025 at 7:01 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome. April 26, 2025 at 8:48 PM, 이태기 (Taeki Lee) : @팀장님들께 금일 조립동에 14시50분경 소방알람(실제 화재는 없었음)이 울려 방화셔터가 Down되었었습니다. 자동화 컨베이어가 각 동과 창고를 연결하고 있어서 컨베이어 사이 사이에 방화셔터가 존재합니다. 금일 소방알람이 해제되고 제조에서 다시 방화셔터를 올리는 과정에서 컨베이어에 있던 릴과 간섭되어 릴 1개가 전도되었습니다. 해당 케이스는 전극 조립 화성 모듈 전부 해당되는데 화성모듈의 경우 셀이라서 화재 위험이 있습니다. 방화셔터 Down후 정상화 시에는 시간이 걸리더라도 저희 FA 테크니션과 동행하여 위험인자가 없는지 확인하고 셔터 Up을 진행하도록 각 공정에 전파 부탁드립니다. 자동화 카톡방이 전극 조립 화성 모듈 다 있는데 그 카톡방을 활용해서 FA를 부르시면 됩니다. 감사합니다. April 26, 2025 at 8:49 PM, 이태기 (Taeki Lee) : Please call FA technicians when you need to operate and open the fire shutter on AGV route. April 26, 2025 at 9:14 PM, KIM SEYEON [김세연]_FA : The most important thing is when there is a fire alarm, please share information to SHE and UT firstly and ASAP. FA will support when they or formation operators shutter up. whether any risk exists or not. April 26, 2025 at 10:26 PM, 한상범(Han Sang Beom) : @FA Please check AGV#13 PI0_Loading T5(Busy->Compt) Time over alarm April 26, 2025 at 10:27 PM, FA CS AGV David 데이비드 : Okcoming April 26, 2025 at 10:30 PM, FA CS AGV David 데이비드 : Solved April 26, 2025 at 11:34 PM, Horváth László SL/B : M0STK013 STK OP#3 Check please. The pallet delivery is delayed. Thank you @Boromisza Zoltán @Denkó Jani (F.A.) April 26, 2025 at 11:36 PM, Horváth László SL/B : And CellBuffer 4 Disconnected Error April 26, 2025 at 11:41 PM, Boromisza Zoltán : Solved April 26, 2025 at 11:41 PM, Horváth László SL/B : M0STK011-STK OP#2 check plz April 26, 2025 at 11:54 PM, Denkó Jani (F.A.) : All stk erros is solved April 26, 2025 at 11:54 PM, FA CS AGV David 데이비드 : Thanks April 26, 2025 at 11:56 PM, Horváth László SL/B : Goood, Thanks April 27, 2025 at 12:14 AM April 27, 2025 at 12:14 AM, 한상범(Han Sang Beom) : @FA Empty Pallets are not being delivered to Line 10. Please check. April 27, 2025 at 12:14 AM, FA CS AGV David 데이비드 : @Shahbaz 샤바즈 MCS/RTD April 27, 2025 at 12:18 AM, Shahbaz 샤바즈 MCS/RTD : There is already job with pallet Z30140 currently in M0STK013. @FA Please check April 27, 2025 at 12:19 AM, Shahbaz 샤바즈 MCS/RTD : Z301400* April 27, 2025 at 12:32 AM, Boromisza Zoltán : Yes April 27, 2025 at 12:36 AM, FA CS AGV David 데이비드 : It's paused for some reason Can you please take a look @Denkó Jani (F.A.) April 27, 2025 at 12:50 AM, Boromisza Zoltán : Solved April 27, 2025 at 12:51 AM, FA CS AGV David 데이비드 : Thanks April 27, 2025 at 1:45 AM, Denkó Jani (F.A.) : @Shahbaz 샤바즈 MCS/RTD please create a task for the M0STK014_C01 ,T704865 palette for the M0STK014_P07 port. thank you April 27, 2025 at 1:51 AM, Shahbaz 샤바즈 MCS/RTD : I created a command but it is terminated with HCACK = 6, object doesn’t exist. April 27, 2025 at 1:57 AM, Denkó Jani (F.A.) : I can't put the palette anywhere, neither on a door nor on a shelf. April 27, 2025 at 1:57 AM, Shahbaz 샤바즈 MCS/RTD : Where it is now physically? April 27, 2025 at 1:58 AM, Denkó Jani (F.A.) : On the crane, as shown in the scs April 27, 2025 at 1:59 AM, Denkó Jani (F.A.) : M0STK014_C01 April 27, 2025 at 2:01 AM, Shahbaz 샤바즈 MCS/RTD : But the SCS reply is HCACK 6 “Object doesn’t exist “ April 27, 2025 at 2:02 AM, Denkó Jani (F.A.) : I believe it, but it's still here on the crane, I'm standing here facing it 😂 April 27, 2025 at 2:03 AM, Shahbaz 샤바즈 MCS/RTD : Can you please check the SCS log, I don’t have access to SCS? April 27, 2025 at 2:04 AM, Denkó Jani (F.A.) : What are you curious about, what am I looking at? April 27, 2025 at 2:05 AM, Denkó Jani (F.A.) : I deleted the task because it hasn't moved in a while, I made another task for it, but it doesn't do anything either. I can only give it commands to move the crane here and there on the track, but that doesn't get me very far 🫣 April 27, 2025 at 2:05 AM, Shahbaz 샤바즈 MCS/RTD : I mean why SCS reply is HCACK=6 if carrier exists there. April 27, 2025 at 2:06 AM, Denkó Jani (F.A.) : I dont know April 27, 2025 at 2:09 AM, Shahbaz 샤바즈 MCS/RTD : Please can you try once more to transfer. I updated in MCS as well. April 27, 2025 at 2:19 AM, Denkó Jani (F.A.) : According to the mcs there is no data on the crane, can you solve this? because I don't have access April 27, 2025 at 2:20 AM, Shahbaz 샤바즈 MCS/RTD : I already updated in MCS with T704865 April 27, 2025 at 2:20 AM, Denkó Jani (F.A.) : Yes April 27, 2025 at 2:21 AM, Shahbaz 샤바즈 MCS/RTD : It seems there is an issue with SCS data April 27, 2025 at 2:22 AM, Denkó Jani (F.A.) : The SCS is on, everything is fine. The MCS is on, the problem is April 27, 2025 at 2:42 AM, Shahbaz 샤바즈 MCS/RTD : Any update regarding this. I reconciled the stocker and it updated the location to M0STK014_0201901 again in MCS/RTD. April 27, 2025 at 4:03 AM, Szücs Géza FT-B : @MCS please change T704865 carrier location from M0STK014_C01 to M0STK014_P07 and create an order to this carrier from this port, to M0STK014_P10 thank You April 27, 2025 at 4:04 AM, Denkó Jani (F.A.) : @Shahbaz 샤바즈 MCS/RTD April 27, 2025 at 4:06 AM, Shahbaz 샤바즈 MCS/RTD : I created a transfer command but the reply from EQP side is side is HCACK 6 (Object doesn’t exist) and location goes to NA in MCS. April 27, 2025 at 4:08 AM, Szücs Géza FT-B : because You need in MCS / Carrier Management change the T704865 unit April 27, 2025 at 4:08 AM, Szücs Géza FT-B : first April 27, 2025 at 4:09 AM, Shahbaz 샤바즈 MCS/RTD : Yes, definitely I updated the carrier data in MCS before creating a transfer command but this reply is from SCS side. April 27, 2025 at 4:13 AM, Denkó Jani (F.A.) : Solved 🤝 April 27, 2025 at 4:19 AM, Shahbaz 샤바즈 MCS/RTD : Is the pallet removed? April 27, 2025 at 4:33 AM, Denkó Jani (F.A.) : yes, we took it out with a forklift 🫨 April 27, 2025 at 4:33 AM, Shahbaz 샤바즈 MCS/RTD : Okay thanks. April 27, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— April 27, 2025 at 6:54 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK014_C01/C02 there is MCP SMC#2 Disconnected Error. Thank you! April 27, 2025 at 7:32 AM, Csepi Árpád : The communication issue with the M0STK014 SMC#1 crane has been resolved! The SMC#2 crane also needs to be checked in manual mode, so I kindly ask for a little patience. April 27, 2025 at 7:38 AM, Mohammad Amir : Thank you very much for your hardwork 🙏 April 27, 2025 at 7:57 AM, Csepi Árpád : The inspection work has been completed! The M0STK 014 cranes are operating in automatic mode! April 27, 2025 at 7:58 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 7:58 AM, Csepi Árpád : You’re welcome! April 27, 2025 at 9:38 AM, Mohammad Amir : @Csepi Árpád Please check M0STK012_C02 it is inactive state one job is pending because of this. Thank you very much! April 27, 2025 at 9:47 AM, Csepi Árpád : No issues were found with the C02 crane! Please repeat the task assignment for the crane. April 27, 2025 at 9:52 AM, Mohammad Amir : Could you please make M0STK014_P11_OP01 "IN " type. Thank you very much! April 27, 2025 at 10:06 AM, Mohammad Amir : Dear @배병민 (Bae Byoungmin) Sir, Issue has been resolved ✅. Carrier Z301268 has finally started to move from the bridge CNV,I have sent this to store in M0STK014_Z01. I am monitoring the transfer. Thank you very much! April 27, 2025 at 10:07 AM, 배병민 (Bae Byoungmin) : Thank you April 27, 2025 at 10:08 AM, Mohammad Amir : You are welcome Sir! April 27, 2025 at 10:09 AM, Csepi Árpád : Please check the travel direction! The M0STK014 P11-OP01 port is set to IN. April 27, 2025 at 10:10 AM, Mohammad Amir : Thank you very much! I will inform you when you need to set it back to "OUT". April 27, 2025 at 10:12 AM, Csepi Árpád : Okay! April 27, 2025 at 10:24 AM, Mohammad Amir : @Csepi Árpád @FA Please confirm is there carrier T705040 located at M0STK012_C01. As i checked according to analysis this carrier is present at C01 cause job was terminated at 25th April 12:50. Thank you very much! April 27, 2025 at 10:38 AM, Csepi Árpád : The C01 crane is empty! April 27, 2025 at 10:38 AM, Mohammad Amir : Thank you very much for the confirmation! April 27, 2025 at 10:57 AM, Mohammad Amir : Could you please make M0STK014 P11 -OP01 to its default state "OUT". Thank you very much! April 27, 2025 at 11:01 AM, Csepi Árpád : The modification has been completed! April 27, 2025 at 11:03 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 11:03 AM, Csepi Árpád : @Mohammad Amir Please check the carrier with ID: Z301268. Its status is “Paused.” April 27, 2025 at 11:04 AM, Mohammad Amir : Checking April 27, 2025 at 11:09 AM, Csepi Árpád : You would like to request the M0STK011_M01 port. April 27, 2025 at 11:10 AM, Mohammad Amir : You would like to receive this carrier at STK011_M01 port? Thank you very much! April 27, 2025 at 11:11 AM, Csepi Árpád : Yes! April 27, 2025 at 11:11 AM, Mohammad Amir : Okay ,I am working on it. Thank you! April 27, 2025 at 11:11 AM, Csepi Árpád : Thank you very much! April 27, 2025 at 11:12 AM, Mohammad Amir : You are welcome! April 27, 2025 at 11:16 AM, Mohammad Amir : Could you please cancel the command for Z301268 from SCS side as well. Thank you very much! April 27, 2025 at 11:17 AM, Mohammad Amir : @Csepi Árpád April 27, 2025 at 11:18 AM, Csepi Árpád : It has been deleted! April 27, 2025 at 11:19 AM, Mohammad Amir : Thank you very much . April 27, 2025 at 11:21 AM, Mohammad Amir : Job has been created successfully ✅. Carrier on its way to M01 Port. I am monitoring the transfer for smooth delivery. Thank you very much! April 27, 2025 at 11:22 AM, Csepi Árpád : Thank you very much for your help! April 27, 2025 at 11:22 AM, Mohammad Amir : You are welcome! April 27, 2025 at 11:23 AM, Mohammad Amir : The carrier has successfully arrived at STK011_M01 at 11:22. ✅ Please collect it. Feel free to reach out to me if you need any assistance. Thank you very much! April 27, 2025 at 12:54 PM, Tklcz Alexandra SL/A : Kérünk technikust a boxpackingre az oldalfalnál van probléma. April 27, 2025 at 1:37 PM, Tklcz Alexandra SL/A : Can anyone help with EOL Buffer 1? I have a palette that is in a very bad position. April 27, 2025 at 1:47 PM, FA CS AGV Jawad : @Csepi Árpád can you plz help April 27, 2025 at 1:49 PM, FA CS AGV Jawad : Pallet Z301268 is misallined and stuck on bridge April 27, 2025 at 2:06 PM, FA CS AGV Jawad : Resolved- Thank you @Édl Tamás @Csepi Árpád 🙏 April 27, 2025 at 2:08 PM, Csepi Árpád : Solved April 27, 2025 at 5:10 PM, Mohammad Amir : @Édl Tamás Please check M0STK013_C02 there is Crane PLC interface Error and it is blocking several jobs. Thank you very much! April 27, 2025 at 5:17 PM, Édl Tamás : Solved April 27, 2025 at 5:18 PM, Mohammad Amir : Thank you very much! April 27, 2025 at 6:15 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+1/12 Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Fabriczius Gergely, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő April 27, 2025 at 6:23 PM, Vadász Dóra SSL/B : Sziasztok EOL 2-5-ig áll az agv, útban van a palettákat békázóknak. Kérem valaki rakja őket sorba. Köszönöm April 27, 2025 at 6:24 PM, Muneeb Ur Rehman : Checking April 28, 2025 at 6:04 AM April 28, 2025 at 6:04 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 28, 2025 at 6:28 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 28 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 28, 2025 at 7:15 AM, Szijjártó Balázs : Modul Line 3 alapanyag raktát liftnél a HMI panel össze-vissza hibákat jelez, nem is nagyon jön anyag. April 28, 2025 at 7:15 AM, N.Gábor F.A. : Dolgozunk rajta April 28, 2025 at 8:01 AM, FACS_JaewonShin : ■ 28th April Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - PLC control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 28, 2025 at 8:11 AM, Szijjártó Balázs : Majd kelletek a Line 3-ra kicsit. LWR-nél lesz egy kis manuális beavatkozás 2 P-box múlva, de én üzemorvosnál leszek. April 28, 2025 at 8:20 AM, Őri Imre : Jo reggelt! April 28, 2025 at 8:21 AM, Őri Imre : 8sor magas raktár hibába áll! April 28, 2025 at 8:21 AM, Őri Imre : Meg tudnátok nézni? April 28, 2025 at 10:13 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK014 we are receiving Firesensor abnormal state alarm from this STK. Please check this on priority. Thank you very much! April 28, 2025 at 10:18 AM, N.Gábor F.A. : I don't see any errors or anything like that. April 28, 2025 at 10:20 AM, Mohammad Amir : According to Analysis, This alarm exists on M0STK014 since 10:02. Alarm id-701 Alarm code -128 Thank you very much! April 28, 2025 at 10:21 AM, Mohammad Amir : I did not find any log of this alarm being cleared from CIM side still please check. Thank you! April 28, 2025 at 3:59 PM, Gebri Ákos/SL/A : Hi ! Can someone send to an other position the number 5 avg ? April 28, 2025 at 4:15 PM, 원승연(Seungyeon Won) : AGV #11 plz check April 28, 2025 at 4:16 PM, 원승연(Seungyeon Won) : I fixed April 28, 2025 at 4:18 PM, 원승연(Seungyeon Won) : AGV same error April 28, 2025 at 4:18 PM, Duna Don : Checking April 28, 2025 at 4:19 PM, 원승연(Seungyeon Won) : An error occurs every time AGV #11 moves. Please check it. It is unable to continue moving. AGV #11 이동 시마다 에러가 발생합니다. 확인 부탁드립니다. 이동이 불가능합니다. April 28, 2025 at 4:20 PM, FA CS AGV Jawad : Fixed & moving April 28, 2025 at 5:02 PM, Czébely Dániel SL—D : 11 AGV problem plz check. April 28, 2025 at 5:03 PM, FA CS AGV Jawad : I hve paised it due to AGV 10.. April 28, 2025 at 5:03 PM, FA CS AGV Jawad : Modul yes..? April 28, 2025 at 5:03 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE @FACS_TaehyeongJin 같이 확인 부탁드립니다 April 28, 2025 at 5:03 PM, FACS_Youngmin LEE : i will go now April 28, 2025 at 5:04 PM, Czébely Dániel SL—D : Formation April 28, 2025 at 5:05 PM, 원승연(Seungyeon Won) : AGV #11 또 멈췄습니다. AGV SLAM 에러 자주 발생합니다 계속 파레트 막혀서 점검 요청드립니다. April 28, 2025 at 5:06 PM, FACS_Youngmin LEE : 네 알겠습니다. April 28, 2025 at 5:10 PM, FA CS AGV Jawad : @FACS_Youngmin LEE AGV 10, Modul has Right rear - steering wheel limit sensor alarm. April 28, 2025 at 5:19 PM, FACS_Youngmin LEE : i will go April 28, 2025 at 5:20 PM, FACS_Youngmin LEE : 현재 조치는 하였습니다. 추후 재발하면 라인아웃 후 점검해보겠습니다. April 28, 2025 at 5:34 PM, FA CS AGV Jawad : It has been fixed April 28, 2025 at 6:08 PM, FACS_Youngmin LEE : @FA CS AGV Jawad @FA-CS-AGV-Masoud @Duna Don @FA/CS/AGV/Taimur @FA CS AGV David 데이비드 25.04.28 ■GF AGV Running states GF_Cell_Buffer_Module: VC:08,09,10,11,12 GF_Raw material VC:01,02,03 GF_End_Product: VC: 05,08,09,10,11,13,14 Problem:VC07-Encoder VC12-Encoder ■1F AGV Running states 1F_Cell_Buffer_Module: VC:02, 03, 06,08 1F_Raw material VC:01,02,03 1F_End_Product: VC: 02, 04, 05, 06 Today's fix 1F_End_Product VC06 Node 5903 Problem:Charging error -> April 28, 2025 at 6:57 PM, R. József C SL EOL : Sziasztok, cellbufferre rá tudnátok nézni? Boxpackingra nem jön a lekért paletta mennyiség April 28, 2025 at 7:31 PM, 배병민 (Bae Byoungmin) : 야간 화성 삼구분께서 확인 가능하실까요? 박스포장기 지금 제품 투입 안되는거는 WMS 상에서 셀버퍼 포장선택항목이 하나도 없습니다. April 28, 2025 at 7:32 PM, 조보행(CHO BO HAENG) : Y로 선택된것이 36개 있습니다 April 28, 2025 at 7:33 PM, 조보행(CHO BO HAENG) : 출고가 안되고 있습니다 확인좀 부탁드립니다 April 28, 2025 at 7:33 PM, VK (mcs) : There is no LR Last LR received at 16:52 April 28, 2025 at 7:36 PM, VK (mcs) : Z301460 Assigned from STK 12 at 16:52 But job cancelled by OP action at 16:53 April 28, 2025 at 7:40 PM, VK (mcs) : Z301458 and Z301460 have been released. April 28, 2025 at 7:40 PM, R. József C SL EOL : 박스패킹의 로딩 포트를 다시 시작하여 작동하는지 확인했습니다. 지금은 좋을 것 같아요. April 28, 2025 at 7:42 PM, 배병민 (Bae Byoungmin) : 지금 정상 반송중입니다 April 28, 2025 at 7:42 PM, 조보행(CHO BO HAENG) : 네 알겠습니다 감사합니다 April 28, 2025 at 8:40 PM, R. József C SL EOL : @Zoltán Harasztia FA Boxpackingra szeretnék kérni segítséget Nyomtatónál vákuum probléma van April 28, 2025 at 8:40 PM, Zoltán Harasztia FA : Megyünk April 28, 2025 at 8:47 PM, R. József C SL EOL : Köszönöm April 28, 2025 at 8:48 PM, Zoltán Harasztia FA : Kész April 28, 2025 at 9:06 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Boxpackingra gyertek kérlek. Pántolóval van probléma April 28, 2025 at 9:34 PM, R. József C SL EOL : 4es 3as közötti töltőnél 9-es agv hibába áll modulon, nézzétek meg kérlek Köszönöm April 28, 2025 at 9:34 PM, FA-CS-AGV-Masoud : Coming April 28, 2025 at 9:35 PM, R. József C SL EOL : Thanks April 28, 2025 at 9:37 PM, FA-CS-AGV-Masoud : Solved April 28, 2025 at 11:33 PM, Halász György SL : Hi, Modul 1F line8 AGV(6) allarm at the charging stacion. Thanks April 28, 2025 at 11:33 PM, FA-CS-AGV-Masoud : Coming April 28, 2025 at 11:38 PM, FA-CS-AGV-Masoud : Solved April 29, 2025 at 12:04 AM April 29, 2025 at 12:04 AM, Halász György SL : Hi, Modul 1F line8 allarm at the lift stacion. Thanks April 29, 2025 at 12:15 AM, Döme György F.A : Kész April 29, 2025 at 12:23 AM, R. József C SL EOL : Tudnátok jönni boxpackingra, Egyoldalas nyomtatónál van probléma April 29, 2025 at 12:25 AM, Döme György F.A : Igen.Nemsokára megyünk. April 29, 2025 at 12:29 AM, Sarvajcz Ferenc FA : Fercsi intézkedik April 29, 2025 at 4:17 AM, Sási Zsolt SL/C/ EOL : 11es AGV ACS Alive alarm. Nézzétek meg kérlek April 29, 2025 at 4:17 AM, FA-CS-AGV-Masoud : Coming April 29, 2025 at 4:21 AM, FA-CS-AGV-Masoud : Solved April 29, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+3 Overtime (3):Édl Tamás, Böröcz Tamás, Céhman Zsolt Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Oláh András, Céhman Zsolt Assembly(6): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs,Böröcz Tamás Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Édl Tamás April 29, 2025 at 7:01 AM, Gebri Ákos/SL/A : Good morning ! Can someone send the 16number avg to an other position ? April 29, 2025 at 7:01 AM, FA CS AGV Jawad : Sure April 29, 2025 at 7:14 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 29 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 29, 2025 at 7:39 AM, Czébely Dániel SL—D : @N.Gábor F.A. @F.A.Balazs @Dávid F.A. @Édl Tamás Sziasztok van egy "Firesensor abnormális state" hiba folyamatosan a buffer #4-ben a sori ellátást ez nem gátolja viszont a buffer manuálisan nem használható rá tudnátok nézni hogy orvosolható-e a probléma persze ha nem lesz nagyobb állás idő emiat. Köszi. April 29, 2025 at 7:41 AM, N.Gábor F.A. : Hali Hát majd 9 után esetleg a koreaiakkal Mi nem igazán tudtunk ezzel mit kezdni April 29, 2025 at 7:41 AM, Czébely Dániel SL—D : Nem gond csak jeleztem hogy van ilyen probléma April 29, 2025 at 7:42 AM, N.Gábor F.A. : Igen tudunk erről a hibáról Régebb óta fent áll De azért köszi az infót April 29, 2025 at 7:44 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong April 29, 2025 at 8:21 AM, 배병민 (Bae Byoungmin) : @duzzaman Md (MCS) Please check the "T704265" palette in MOSTK013_P13. It is stuck and not moving. April 29, 2025 at 8:31 AM, duzzaman Md (MCS) : MCS order is normal. No discrepancies found. April 29, 2025 at 8:34 AM, Dávid F.A. : Solved April 29, 2025 at 8:35 AM, Sazzad Bhai SKon : Thank you, could you please share the issue why this pallet stuck there? April 29, 2025 at 8:37 AM, Dávid F.A. : I moved the palette in manual mode. The problem was solved. April 29, 2025 at 2:07 PM, 정낙정(JEONG NAK JEONG) : @FA 박스포장기 1단밴딩기부분 첫 밴딩중 우측 밴딩 끊어짐 발생했습니다. 확인부탁드립니다. April 29, 2025 at 2:10 PM, FACS_Youngmin LEE : 네 가고 있습니다. April 29, 2025 at 2:15 PM, Őri Imre : 4sor end plate gentry communikacios hiba van! Meg tudjátok nézni? April 29, 2025 at 2:15 PM, Őri Imre : Köszönöm April 29, 2025 at 3:01 PM, Gebri Ákos/SL/A : Hi ! Please someone send the number 18 avg to an other position April 29, 2025 at 3:01 PM, Gebri Ákos/SL/A : Thank you April 29, 2025 at 3:02 PM, FA CS AGV Jawad : This message was deleted. April 29, 2025 at 3:02 PM, FA CS AGV Jawad : I do April 29, 2025 at 3:05 PM, Gebri Ákos/SL/A : Thank u April 29, 2025 at 3:55 PM, Czébely Dániel SL—D : Please move the AGV 16 away, it's on the way. April 29, 2025 at 3:55 PM, Czébely Dániel SL—D : !!!! April 29, 2025 at 3:56 PM, FA CS AGV Jawad : Is it urgent..? April 29, 2025 at 3:58 PM, Czébely Dániel SL—D : We need to remove a pallet from EOL 5 line in the forming area and here we cannot access the 16 AGVs. April 29, 2025 at 4:00 PM, FA CS AGV Jawad : I am on my way..from 1st floor April 29, 2025 at 4:01 PM, Czébely Dániel SL—D : No longer necessary, resolved April 29, 2025 at 4:01 PM, FA CS AGV Jawad : Okz April 29, 2025 at 5:14 PM, 정낙정(JEONG NAK JEONG) : @FA 박스포장기 1단밴딩기부분 첫 밴딩중 우측 밴딩 끊어짐 발생했습니다. 확인부탁드립니다. 아까랑 동일현상입니다. April 29, 2025 at 5:15 PM, FACS_Youngmin LEE : 네 가겠습니다. April 29, 2025 at 6:53 PM, R. József C SL EOL : Sziasztok Boxpackingra kérnék segítséget Vákuum hiba van April 29, 2025 at 7:04 PM, Döme György F.A : Kész April 29, 2025 at 7:04 PM, R. József C SL EOL : Köszönöm April 29, 2025 at 7:30 PM, R. József C SL EOL : Cellbuffer 4# kérlek lessétek meg Crane rá rack position not detect error April 29, 2025 at 7:30 PM, Sarvajcz Ferenc FA : Ok April 29, 2025 at 7:32 PM, 배병민 (Bae Byoungmin) : Please reset it and put it in auto mode. I'll take care of it. April 29, 2025 at 7:40 PM, Denkó Jani (F.A.) : Solved April 29, 2025 at 7:41 PM, R. József C SL EOL : Köszönöm April 29, 2025 at 8:00 PM, 배병민 (Bae Byoungmin) : Please check cell buffer#4 S/C April 29, 2025 at 9:55 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 15 AGV áll a buffernél hibával. Nézzétek meg kérlek April 29, 2025 at 9:56 PM, FA-CS-AGV-Masoud : Coming April 29, 2025 at 9:58 PM, FA-CS-AGV-Masoud : Solved April 29, 2025 at 10:27 PM, R. József C SL EOL : Cellbufferre nezzetek rá kérlek C/v data mismatch nothing error April 29, 2025 at 10:40 PM, Döme György F.A : Kész April 29, 2025 at 11:27 PM, R. József C SL EOL : Eolon útban vannak az agv-k Kérlek küldjétek el Paletta mozgatás van April 29, 2025 at 11:28 PM, FA-CS-AGV-Masoud : Coming April 29, 2025 at 11:30 PM, R. József C SL EOL : Modul 2-es sorral szemben kitöltő portnál #9 agv time over alarm hibával áll Nézzétek meg kérlek Köszönöm April 29, 2025 at 11:32 PM, FA-CS-AGV-Masoud : Im on the way from first floor thank you April 29, 2025 at 11:34 PM, R. József C SL EOL : It's okay, thank you April 29, 2025 at 11:39 PM, FA-CS-AGV-Masoud : Solved, April 29, 2025 at 11:47 PM, R. József C SL EOL : Thanks April 30, 2025 at 1:19 AM April 30, 2025 at 1:19 AM, FA-CS-AGV-Masoud : @FA Please check M0STK011_P05 Crane plc interface error April 30, 2025 at 1:22 AM, Sarvajcz Ferenc FA : Kész. April 30, 2025 at 2:59 AM, R. József C SL EOL : 1F modulon #3-as agv töltőnél hibával áll Nézzétek meg kérlek Köszönöm April 30, 2025 at 2:59 AM, FA-CS-AGV-Masoud : Coming April 30, 2025 at 3:03 AM, FA-CS-AGV-Masoud : Solved April 30, 2025 at 3:09 AM, Herceg Sándor SSL/C : Sziasztok! Cell buffer - M0STK011 Crane carrier data mismatch Nézzétek rá kérlek. Köszi! April 30, 2025 at 3:09 AM, Zoltán Harasztia FA : Mindjárt megyünk April 30, 2025 at 3:42 AM, 한상범(Han Sang Beom) : Empty Pallet is not being sent to EOL. Please check it. @FA April 30, 2025 at 3:46 AM, Zoltán Harasztia FA : There was an issue in the warehouse, but it has been resolved. From now on, the empty pallets will be sent. April 30, 2025 at 6:44 AM, Tklcz Alexandra SL/A : Hi! EOL AGV13 error. April 30, 2025 at 6:45 AM, Duna Don : Checking April 30, 2025 at 7:01 AM, Duna Don : We turned it off for a while to prevent the battery from draining. Once they finish fixing the equipment, we will turn it back on. Thank you! April 30, 2025 at 7:01 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 30 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 30, 2025 at 7:03 AM, Tklcz Alexandra SL/A : Thank you! April 30, 2025 at 7:07 AM, Tklcz Alexandra SL/A : Kérünk karbantartást a boxpacking oldalfalhoz. April 30, 2025 at 7:11 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— April 30, 2025 at 8:12 AM, 원승연(Seungyeon Won) : Plz turn on AGV 13 April 30, 2025 at 8:12 AM, FA CS AGV Jawad : I do April 30, 2025 at 8:43 AM, Tklcz Alexandra SL/A : Request maintenance on boxpacking, MES error April 30, 2025 at 8:51 AM, 배병민 (Bae Byoungmin) : In case of MES errors, please share the MES error code number along with your request. April 30, 2025 at 8:54 AM, Tklcz Alexandra SL/A : Okay. Are you currently in the area? April 30, 2025 at 8:57 AM, Tklcz Alexandra SL/A : MES code: 9999 unknown: please contact your system administrator. April 30, 2025 at 8:58 AM, FACS_TaehyeongJin : @mcs carrier id R110325 MES error there is no data plz check April 30, 2025 at 8:59 AM, 배병민 (Bae Byoungmin) : @준용 매니져님 안녕하세요 MES 9999 에러코드 확인 가능하실까요? April 30, 2025 at 9:31 AM, 원승연(Seungyeon Won) : 해당 파레트 MES 로그 확인 시 Weight request 이후 Weightcomplete 보고가 없습니다. @심정민 (Shim Jungmin) @정낙정(JEONG NAK JEONG) April 30, 2025 at 9:34 AM, Tklcz Alexandra SL/A : Boxpacking error: Mes code 0006 Progress status of the tray is not waitforrule April 30, 2025 at 9:36 AM, FACS_Youngmin LEE : we will go April 30, 2025 at 9:36 AM, Tklcz Alexandra SL/A : Thanks! April 30, 2025 at 9:41 AM, FACS_TaehyeongJin : @mcs carrier id R110326 Mes error there is no data plz check April 30, 2025 at 9:42 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS Team,@MCS/RTD Team M0STK037 bank carrier id : U019028 반송명령 내렸는데 움직이지 않고 있습니다 M0CNV033_M03 으로 배출해야서 확인 부탁드립니다 April 30, 2025 at 9:42 AM, Sazzad Bhai SKon : When pallet goes to cell packing it becomes Carrier removed status. This is normal scenario April 30, 2025 at 9:43 AM, FACS_Youngmin LEE : 네 가고 있습니다. April 30, 2025 at 9:44 AM, Sazzad Bhai SKon : Ccs transport command reply was okay (HCACK 4), checking ccs status April 30, 2025 at 9:44 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS Team,@MCS/RTD Team M0STK037 bank carrier id : U019028 Please move the M0CNV033_M03 April 30, 2025 at 9:45 AM, duzzaman Md (MCS) : We confirm, everything is okay for this carrier from MCS side as we've got HCACK4 reply. @FA Please check April 30, 2025 at 9:47 AM, duzzaman Md (MCS) : New job created to the requested CNV port.thank you. April 30, 2025 at 9:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 남측 1F M0STK037 bank carrier id : U019028 배출 작업이 되지 않고 있습니다 금일 출하제품이라 빠른 확인 부탁드립니다. April 30, 2025 at 9:52 AM, FACS_TaehyeongJin : @mcs SCS status is queued plz check April 30, 2025 at 10:00 AM, duzzaman Md (MCS) : Everything is okay from MCS side. Even the STK has only one job, its being put into queued. @SCS @FA Kindly check this issue. April 30, 2025 at 10:09 AM, duzzaman Md (MCS) : @FA Kindly check M0STK024_C01 Crane shelf in abort (double cargo) Thank you April 30, 2025 at 10:28 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 @FA team PM님 해당제품이 지금 1시간 넘게 배출이 되지 않고 있어서 빠른 확인 부탁드립니다. 출하 차량 및 인원이 대기 중입니다 M0STK037 bank carrier id : U019028 Please move the M0CNV033_M03 April 30, 2025 at 10:32 AM, 배병민 (Bae Byoungmin) : 지금 확인중입니다 설비 상태 SCS 상태 정상적인 상황이고 명령도 있는상태에서 이동이없습니다 April 30, 2025 at 10:34 AM, Édl Tamás : Solved April 30, 2025 at 10:35 AM, Édl Tamás : but it doesn't move April 30, 2025 at 10:46 AM, FACS_Hyeongi Son : @mcs Please move U079028 to M0CNV033_M03 port April 30, 2025 at 10:48 AM, duzzaman Md (MCS) : Job has been created. Thank you. April 30, 2025 at 11:00 AM, 배병민 (Bae Byoungmin) : Please M0STK037_P12 U079028 to M0STKCNV033_M03 port. April 30, 2025 at 11:02 AM, Tklcz Alexandra SL/A : Boxpacking error: Align alarm tc cover We need technician. April 30, 2025 at 11:07 AM, duzzaman Md (MCS) : Job has been created and carrier is moving. Thank you. April 30, 2025 at 11:17 AM, Édl Tamás : Solved April 30, 2025 at 11:36 AM, Avacz Beáta : Sziasztok. Line 4 en az FR kapszulás port fényfüggönye folyamatosan piros. Rá tudnátok nézni? April 30, 2025 at 12:11 PM, Tklcz Alexandra SL/A : Box packing error 4 sidelabeler vacuum problem We need technician. April 30, 2025 at 12:32 PM, Avacz Beáta : Még mindig fenn áll a probléma. Ránézne vki? April 30, 2025 at 12:39 PM, Tklcz Alexandra SL/A : The Hungarian technician could not solve the problem, please support from a Korean technician. April 30, 2025 at 1:13 PM, Édl Tamás : Solved April 30, 2025 at 1:20 PM, Avacz Beáta : ? April 30, 2025 at 1:47 PM, Tóth Gyula : Sziasztok, MOCNV033 M_03 modul kiszedès elakadt. Kèrlek nèzzètek rá. Köszönöm szépen. April 30, 2025 at 1:56 PM, Édl Tamás : Kész! April 30, 2025 at 2:07 PM, Édl Tamás : This message was deleted. April 30, 2025 at 2:17 PM, Tklcz Alexandra SL/A : Kérünk karbantartást a GF 1 bufferhez. Hibát jelez. April 30, 2025 at 2:36 PM, Tklcz Alexandra SL/A : Please support gf buffer. April 30, 2025 at 2:43 PM, FACS_Hyeongi Son : Going now April 30, 2025 at 2:54 PM, FACS_Youngmin LEE : solved April 30, 2025 at 2:54 PM, Édl Tamás : Solved April 30, 2025 at 2:58 PM, Tklcz Alexandra SL/A : Thank you! April 30, 2025 at 5:09 PM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) 박스포장기쪽으로 삼구분 한분 대응 가능하실까요? April 30, 2025 at 5:11 PM, 원승연(Seungyeon Won) : 테스트타입 가동 중이여서 5분만 기다려주세요 April 30, 2025 at 5:11 PM, 배병민 (Bae Byoungmin) : 네네 April 30, 2025 at 5:29 PM, 배병민 (Bae Byoungmin) : 현장에서 말씀드린 Z301627 제품은 셀버퍼 수동 포트 앞에 두었습니다 April 30, 2025 at 5:31 PM, 원승연(Seungyeon Won) : 알겠습니다. 팔레트 초기화하고 버퍼에 재투입 해두겠습니다. @유경호(RYU KYEONGHO) April 30, 2025 at 5:54 PM, Tklcz Alexandra SL/A : Boxpacking sidecover error. We need technician. April 30, 2025 at 5:57 PM, FACS_Hyeongi Son : Going now April 30, 2025 at 6:04 PM, FACS_Hyeongi Son : Solved Please check the defective products before putting in the side cover materials And please enter the input number accurately April 30, 2025 at 6:12 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 6:12 PM, 원승연(Seungyeon Won) : Z301627 plz load to buffer warehouse @Nikolett SL/B EOL April 30, 2025 at 6:13 PM, Nikolett SL/B EOL : Finish April 30, 2025 at 6:31 PM, FA-CS-AGV-Masoud : @fa Please check M0STK011_P05 April 30, 2025 at 6:43 PM, Nikolett SL/B EOL : this is the same problem April 30, 2025 at 6:43 PM, Nikolett SL/B EOL : GF 1Buffer SMC#1 Sew Travel X fault hiba van April 30, 2025 at 6:46 PM, 배병민 (Bae Byoungmin) : Please check the quantity of materials and enter them the same way. In the previous problem, there was an issue where the actual product quantity and the set quantity did not match. April 30, 2025 at 6:47 PM, Denkó Jani (F.A.) : Solved April 30, 2025 at 6:47 PM, Denkó Jani (F.A.) : Solved April 30, 2025 at 6:58 PM, Denkó Jani (F.A.) : Solved April 30, 2025 at 7:05 PM, FA-CS-AGV-Masoud : @fa Please check M0STK011_P06 April 30, 2025 at 7:07 PM, 배병민 (Bae Byoungmin) : @FA-CS-AGV-Masoud Please indicate the problem you are requesting. For example, alarm name? or phenomenon? April 30, 2025 at 7:10 PM, FA-CS-AGV-Masoud : The pallet is stuck at the port, and the AGV cannot deliver the pallet to the port. April 30, 2025 at 7:15 PM, Boromisza Zoltán : Solved May 1, 2025 at 6:02 AM May 1, 2025 at 6:02 AM, Horváth László SL/B : Please move AGV #5 away from EOL 11–12. It’s in the way of packing. Thank you. May 1, 2025 at 6:02 AM, FA/CS/AGV/Taimur : Sure. May 1, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— May 1, 2025 at 6:11 AM, FA/CS/AGV/Taimur : AGV:05 has been relocated to another parking space. Thank you May 1, 2025 at 6:12 AM, Horváth László SL/B : Thank you May 1, 2025 at 7:44 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 1, 2025 at 11:21 AM, Tklcz Alexandra SL/A : Hi! EOL AGV11 error. May 1, 2025 at 11:21 AM, 원승연(Seungyeon Won) invited 이재근(lee jae geun). May 1, 2025 at 11:21 AM, FA/CS/AGV/Taimur : Checking May 1, 2025 at 11:22 AM, 원승연(Seungyeon Won) invited 최기수(GI SU CHOI). May 1, 2025 at 11:23 AM, FA/CS/AGV/Taimur : Solved. May 1, 2025 at 11:28 AM, Tklcz Alexandra SL/A : Thanks! May 1, 2025 at 12:46 PM, Tklcz Alexandra SL/A : Hi! EOL GF buffer 4 error. May 1, 2025 at 12:47 PM, Tklcz Alexandra SL/A : SMC 1, SMC2 Travel X distance safety error. May 1, 2025 at 4:46 PM, Tklcz Alexandra SL/A : EOL AGV11 error. May 1, 2025 at 4:46 PM, FA/CS/AGV/Taimur : Checking May 1, 2025 at 5:27 PM, Tklcz Alexandra SL/A : EOL AGV15 error. May 1, 2025 at 5:28 PM, Muneeb Ur Rehman : Checking May 1, 2025 at 6:21 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 1, 2025 at 9:21 PM, Vadász Dóra SSL/B : Sziasztok Modul 11es agv sír. Modul Lift előtt. Kérlek nézzétek meg Köszönöm May 1, 2025 at 9:23 PM, Nikolett SL/B EOL : Sziasztok valami oknál fogva az Eol 5 sorra nem hozza az üres palettát az AGV May 1, 2025 at 9:23 PM, Boromisza Zoltán : Megyek May 1, 2025 at 9:23 PM, Muneeb Ur Rehman : Checking May 1, 2025 at 9:27 PM, Muneeb Ur Rehman : Pallets are coming May 2, 2025 at 6:11 AM May 2, 2025 at 6:11 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2):Novák Károly, Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Kovács Szabolcs 1F: Kasztel Balázs, Novák Zoltán Modul(2): Magyar Balázs, Martina Dávid, May 2, 2025 at 6:12 AM, duzzaman Md (MCS) : @FA Kindly check M0STK024_C01 Crane ankle right detect error Thank you May 2, 2025 at 7:43 AM, 진재정 : ■ Today Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 4 people □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 2, 2025 at 1:08 PM, duzzaman Md (MCS) : @FA Kindly check M0STK024_C01 Crane fork right collapse detect error Thank you May 2, 2025 at 5:29 PM, Czébely Dániel SL—D : A formázás területén a 3-as AGV riasztás allat van az EOL 9-10 közöt található kérem elenőrize. May 2, 2025 at 5:30 PM, Muneeb Ur Rehman : Checking May 2, 2025 at 6:21 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek. 8ad AGV megallt hibával az 5ös soron May 2, 2025 at 6:23 PM, Muneeb Ur Rehman : Checking May 2, 2025 at 6:23 PM, Sási Zsolt SL/C/ EOL : Done May 2, 2025 at 9:32 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Nézzétek meg kérlek a 4es Buffert. Betöltésnél nem viszi el a palettát, nem reagál semmire May 2, 2025 at 9:33 PM, Zoltán Harasztia FA : Megyünk May 2, 2025 at 9:47 PM, Zoltán Harasztia FA : Kész May 2, 2025 at 9:54 PM, Sási Zsolt SL/C/ EOL : Köszi May 3, 2025 at 3:04 AM May 3, 2025 at 3:04 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 9es AGV áll hibával a buffernél. Nézzétek meg kérlek May 3, 2025 at 3:06 AM, Muneeb Ur Rehman : Checking May 3, 2025 at 3:08 AM, Sarvajcz Ferenc FA : Kesz May 3, 2025 at 6:05 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 3 Time: 06:00~18:00 1. Jeong Woo-jun May 3, 2025 at 6:06 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13+1 overtime Overtime (1): Csanálosi Gábor Sick (0):- Holiday (3):Novák Károly, Nagy Gábor , Novák Zoltán Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Csanálosi Gábor 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 3, 2025 at 6:23 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check cell buffer M0STK011 “Crane sew travel X fault “ Thanks May 3, 2025 at 6:49 AM, Őri Imre : Jó reggelt! May 3, 2025 at 6:50 AM, Őri Imre : Modul 3-4 sor közötti magas raktár port hibába van! Meg tudnátok nézni? May 3, 2025 at 6:50 AM, Őri Imre : Köszönöm! May 3, 2025 at 10:43 AM, Éváné Bori Viktória : Helló EOL AGV 6, 4 move please May 3, 2025 at 10:43 AM, FA/CS/AGV/Taimur : Sure coming May 3, 2025 at 1:11 PM, Őri Imre : 4 line end plate gentry ütközött a ládákat. Új raklapot tett be,azon pedig fordítva vannak a ládák May 3, 2025 at 1:11 PM, Őri Imre : Meg tudjátok nézni? May 3, 2025 at 1:11 PM, Őri Imre : Köszönöm! May 3, 2025 at 2:08 PM, Czébely Dániel SL—D : 7 AGV problem pls check May 3, 2025 at 2:08 PM, FA/CS/AGV/Taimur : Checking May 3, 2025 at 5:57 PM, 방혁 PM(Bang.Hyuk) FA : Sziasztok Night shift FA Technician Schedule Date: 2025.05.03 Time:18:00-06:00 1. Bang hyuk 2. Baek hojong Köszönöm szépen May 3, 2025 at 6:42 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 7es AGV áll hibával az 1es soron. Nézzétek meg kérlek May 3, 2025 at 6:42 PM, Muneeb Ur Rehman : Checking May 3, 2025 at 7:07 PM, Halász György SL : Hi, Modul GF line3 LWR case AGV delay May 3, 2025 at 7:08 PM, Halász György SL : Line empty May 3, 2025 at 7:08 PM, Halász György SL : Thanks May 3, 2025 at 7:09 PM, Mohammad Amir : Good evening, Please write me port id ,I will check for you. Thank you very much! May 3, 2025 at 7:10 PM, Halász György SL : Good evening, FA team are here May 3, 2025 at 7:11 PM, Mohammad Amir : Okay , Thanks for the update. If you need any assistance ,feel free to contact me anytime. Thank you very much! May 3, 2025 at 7:13 PM, Halász György SL : Thanks May 3, 2025 at 7:13 PM, Mohammad Amir : You are welcome! May 4, 2025 at 1:55 AM May 4, 2025 at 1:55 AM, 요셉 : EOL agv#7 check plz May 4, 2025 at 1:56 AM, Muneeb Ur Rehman : Checking May 4, 2025 at 1:57 AM, Sarvajcz Ferenc FA : Ok. May 4, 2025 at 2:06 AM, Sarvajcz Ferenc FA : Kész. May 4, 2025 at 2:27 AM, 요셉 : EOL agv#7 An error occurred again. Please check Rear steering limit alarm Slam error May 4, 2025 at 2:27 AM, Muneeb Ur Rehman : Checkkng May 4, 2025 at 2:27 AM, Muneeb Ur Rehman : Checking May 4, 2025 at 2:28 AM, Muneeb Ur Rehman : Fixed May 4, 2025 at 5:57 AM, R. József C SL EOL : 7-es agv áll eol bejárata előtt Kérlek nézzétek meg May 4, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+1 overtime Overtime (1): Csanálosi Gábor Sick (1):Kiss Balázs Holiday (3): Nagy Gábor , Novák Zoltán , Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: , Nagy Zsolt, Csanálosi Gábor, Novák Károly 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 4, 2025 at 6:13 AM, FA CS AGV Jawad : Fixed... May 4, 2025 at 6:17 AM, R. József C SL EOL : Thanks May 4, 2025 at 6:28 AM, Őri Imre : Jó reggelt! May 4, 2025 at 6:29 AM, Őri Imre : 4 sor alsó burkolat gentry rosszul fogta meg a ládát! Meg tudjátok nézni? May 4, 2025 at 6:29 AM, Őri Imre : Köszönöm May 4, 2025 at 6:43 AM, F.A.Balazs : Megyünk May 4, 2025 at 8:29 AM, Éváné Bori Viktória : Helló EOL AGV 5 error, please move. May 4, 2025 at 8:30 AM, FA CS AGV Jawad : I look into it May 4, 2025 at 10:58 AM, FA CS AGV Jawad : @Dávid F.A. i hve put tool trolley back, where it was. Thanks. May 4, 2025 at 11:10 AM, Éváné Bori Viktória : Helló! Eol AGV 7 move please May 4, 2025 at 11:11 AM, FA CS AGV Jawad : Fixed May 4, 2025 at 1:43 PM, Éváné Bori Viktória : Helló! EOL AGV 7 move please! May 4, 2025 at 1:44 PM, FA CS AGV Jawad : Sure May 4, 2025 at 1:47 PM, FACS_Youngmin LEE : @FA CS AGV Jawad Can you move AGV7 to EOL 1Line and turn off power? that AGV have many problem i will check tomorrow thank you May 4, 2025 at 1:52 PM, FA CS AGV Jawad : Ofcourse I do it. May 4, 2025 at 6:04 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra Sidecovernál probléma van May 4, 2025 at 6:04 PM, Zoltán Harasztia FA : Megyünk May 4, 2025 at 7:27 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Nézzétek meg a boxpackingot légyszíves. Vákuum probléma May 4, 2025 at 7:28 PM, Zoltán Harasztia FA : Úton May 4, 2025 at 9:38 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Ugyanaz a probléma. Nézzétek meg kérlek May 4, 2025 at 10:18 PM, R. József C SL EOL : @Zoltán Harasztia FA Cellbuffer #1-re nézzetek rá kérlek Crc2 c/v#08 home return fail error May 4, 2025 at 10:18 PM, Döme György F.A : Megyek May 4, 2025 at 10:18 PM, R. József C SL EOL : Köszönöm May 4, 2025 at 10:26 PM, Döme György F.A : Kész May 4, 2025 at 10:27 PM, R. József C SL EOL : Köszönöm May 4, 2025 at 11:06 PM, Sási Zsolt SL/C/ EOL : Sziasztok 8as AGV hibával áll a buffer kiadónál az 5ös sorral szemben. Nézzétek meg légyszíves May 4, 2025 at 11:06 PM, FA-CS-AGV-Masoud : Coming May 4, 2025 at 11:09 PM, FA-CS-AGV-Masoud : Solved May 4, 2025 at 11:12 PM, FA-CS-AGV-Masoud : @FA Please check port M0STK013_P03 PIO interface error May 4, 2025 at 11:14 PM, R. József C SL EOL : 3as cellbuffer nézzétek meg kérlek, riaszt May 4, 2025 at 11:14 PM, Sarvajcz Ferenc FA : Oké May 4, 2025 at 11:14 PM, Döme György F.A : Zoli úton van May 4, 2025 at 11:15 PM, R. József C SL EOL : Köszönöm May 5, 2025 at 1:22 AM May 5, 2025 at 1:22 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 8as AGV hibával áll az 5ös sorral szemben. Nézzétek meg kérlek May 5, 2025 at 1:22 AM, Sarvajcz Ferenc FA : Mar rajta vagyunk.. May 5, 2025 at 1:22 AM, Sarvajcz Ferenc FA : This message was deleted. May 5, 2025 at 1:22 AM, FA-CS-AGV-Masoud : Coming May 5, 2025 at 1:25 AM, FA-CS-AGV-Masoud : Solved May 5, 2025 at 4:26 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 3as AGV áll hibával. Nézzétek meg kérlek May 5, 2025 at 4:26 AM, FA-CS-AGV-Masoud : Coming May 5, 2025 at 4:29 AM, FA-CS-AGV-Masoud : Solved May 5, 2025 at 5:52 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 1es AGV Áll a buffer előtt. Kérlek ellenőrízzétek! May 5, 2025 at 6:10 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Szabadi Miklós, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladat May 5, 2025 at 6:21 AM, Vadász Dóra SSL/B : Jó reggelt Cell buffer #3,#4 adathiba miatt áll. (GF) Kérem jöjjön valaki, orvosolja a hibát. Köszönöm May 5, 2025 at 8:06 AM, FACS_JaewonShin : ■ 5th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 5, 2025 at 9:56 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @MCS/RTD team bank : M0STK035 source : 0102002 carrier id : Z301794 Dest EQP unit : M0CNV036_M02 @배병민 (Bae Byoungmin) 해당 케리어 아이디가 RTD상에서 배출이 인되고 있습니다. 금일 사외창고 이관품이라 확인 부탁드립니다. @MCS/RTD team The product is not generating RTD commands. Can you manually move it to the M0CNV036_M02 port? May 5, 2025 at 10:02 AM, Shahbaz 샤바즈 MCS/RTD : There is no T301794 in MCS/RTD system. I can see a transfer created for Z301794 from given shelf by OP Action. May 5, 2025 at 10:04 AM, 애니 : That is Z, not T May 5, 2025 at 10:04 AM, SKOH2/제조-셀,모듈 출하/김병호 : ??? May 5, 2025 at 10:04 AM, 배병민 (Bae Byoungmin) : @Shahbaz 샤바즈 MCS/RTD Z301794 Pallet was sent to M0STK035_P12. Please move the pallet to M0CNV036_M02. May 5, 2025 at 10:04 AM, 애니 : Z301794 May 5, 2025 at 10:10 AM, 배병민 (Bae Byoungmin) : This message was deleted. May 5, 2025 at 10:21 AM, Shahbaz 샤바즈 MCS/RTD : It’s can’t be transferred directly to M0CNV036_M02 from P12 and there is no route defined to transfer it back to M0STK035. May 5, 2025 at 10:33 AM, FACS_Hyeongi Son : There is a real thing on M0CNV035_P12. Please create a job May 5, 2025 at 10:39 AM, Shahbaz 샤바즈 MCS/RTD : Currently RTV is OOS. Additionally the job was created to STK035_P12, so MCS received location change history till STK035_P12. May 5, 2025 at 10:52 AM, FACS_Hyeongi Son : RTV is because it's a manual. Now that I've switched to auto mode, it will be possible to operate I've moved to M0CNV035_P12_BP01 now, so please try again May 5, 2025 at 10:57 AM, Nikolett SL/B EOL : Eol 5 sor előtt a 7 es AGV kiállt hibára May 5, 2025 at 11:01 AM, Shahbaz 샤바즈 MCS/RTD : It’s still not working, the job is alternated as no suitable route found for the transfer from P12_BP01. May 5, 2025 at 11:01 AM, Hmyang(Hungary) : @FA CS AGV Jawad May 5, 2025 at 11:03 AM, FA CS AGV Jawad : Already fixed sir May 5, 2025 at 11:03 AM, SKOH2/제조-셀,모듈 출하/김병호 : 해당내용 지금 1시간 넘게 지연되고 있는데 오래 걸리길까요?? 출하차량, 인원 1시간 넘게 대기중입니다. May 5, 2025 at 11:05 AM, 배병민 (Bae Byoungmin) : 해결됬습니다 지금 반송중입니다 May 5, 2025 at 11:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 감사합니다 May 5, 2025 at 11:26 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team bank : M0STK035 (1F) M0CNV036_P13_BP01 설비정지 상태입니다 . 빠른 확인 부탁드립니다 May 5, 2025 at 11:27 AM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son 빠른 지원부탑합니다 May 5, 2025 at 11:27 AM, FACS_Hyeongi Son : 이동 중입니다 May 5, 2025 at 11:43 AM, FACS_Hyeongi Son : 조치 완료했습니다 May 5, 2025 at 2:51 PM, Nikolett SL/B EOL : Sziasztok Eol 6 line előtt az AGV kiállt hibára valaki tudna jönni? May 5, 2025 at 2:51 PM, Duna Don : Checking May 5, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 5, 2025 at 7:07 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.05 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo lee minjae Köszönöm szépen May 5, 2025 at 9:22 PM, Tklcz Alexandra SL/A : Modul buffer AGV2 error. May 5, 2025 at 9:23 PM, Tklcz Alexandra SL/A : Ford 2L May 5, 2025 at 9:23 PM, FA-CS-AGV-Masoud : Coming May 5, 2025 at 9:29 PM, FA-CS-AGV-Masoud : Solved May 5, 2025 at 9:42 PM, Tklcz Alexandra SL/A : Boxpacking align alarm, please help May 5, 2025 at 10:00 PM, Csepi Árpád : Solved May 5, 2025 at 10:38 PM, Tklcz Alexandra SL/A : EOL AGV4 error May 5, 2025 at 10:40 PM, FA-CS-AGV-Masoud : Coming May 5, 2025 at 10:41 PM, FA-CS-AGV-Masoud : Solved May 5, 2025 at 10:54 PM, Tklcz Alexandra SL/A : Same. May 5, 2025 at 10:54 PM, FA-CS-AGV-Masoud : Coming May 5, 2025 at 10:56 PM, FA-CS-AGV-Masoud : Solved May 6, 2025 at 1:55 AM May 6, 2025 at 1:55 AM, Mohammad Amir : @FA @Brázik János Please check M0STK014 we received Firesensor abnormal state alarm. Thank you very much! May 6, 2025 at 2:01 AM, Brázik János : Solved May 6, 2025 at 2:02 AM, Mohammad Amir : Thank you very much! May 6, 2025 at 2:02 AM, Csepi Árpád : @FA-CS-AGV-Masoud I need assistance near the GF CELL 06 AGV! May 6, 2025 at 2:03 AM, FA-CS-AGV-Masoud : Sure coming May 6, 2025 at 2:32 AM, Mohammad Amir : @Brázik János Please check this issue again. Thank you very much! May 6, 2025 at 2:42 AM, Szentirmai Z. A/SSL : @Csepi Árpád Akkor a paletta marad az AGV-n? May 6, 2025 at 2:46 AM, Csepi Árpád : Az MCS jelezte az illetékes felé a hibát. Egyenlőre nincs válasz rá.! Addig marad így a feladat May 6, 2025 at 2:49 AM, Szentirmai Z. A/SSL : Oké, köszi May 6, 2025 at 2:49 AM, Szentirmai Z. A/SSL : Akkor én is átadom a reggelesnek May 6, 2025 at 2:51 AM, Csepi Árpád : Ha van valami változás jelzem! May 6, 2025 at 3:38 AM, Csepi Árpád : Az adatok módosítása megtörtént! Megyek a helyszínre. May 6, 2025 at 3:43 AM, Mohammad Amir : @Brázik János This issue still exists please check. Thank you! May 6, 2025 at 4:01 AM, Brázik János : Solved May 6, 2025 at 4:31 AM, Tklcz Alexandra SL/A : EOL AGV 1 error. May 6, 2025 at 4:31 AM, FA-CS-AGV-Masoud : Coming May 6, 2025 at 4:35 AM, FA-CS-AGV-Masoud : Solved May 6, 2025 at 5:18 AM, 원승연(Seungyeon Won) : AGV 8 ACS ERROR PLZ CHECK THANKS! May 6, 2025 at 5:19 AM, FA-CS-AGV-Masoud : Coming May 6, 2025 at 5:23 AM, FA-CS-AGV-Masoud : Solved May 6, 2025 at 6:02 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 1Sl Overtime(1): Szabadi Miklós, Novák Károly Holiday(1): Czeilinger Krisztián Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Szabadi Miklós, Rácz Dániel --------------- Assy GF (4): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása v May 6, 2025 at 6:14 AM, Nikolett SL/B EOL : Joreggelt Eol 5-6 között 1 AGV hibára állt ki Valaki tudna jönni ? Köszönöm May 6, 2025 at 6:21 AM, FA CS AGV Jawad : Checking May 6, 2025 at 8:29 AM, FACS_JaewonShin : ■ 6th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 6, 2025 at 9:36 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) PM님 금일 셀버퍼 1단 팔레트 자동 투입건 개선으로 셀버퍼 Rack to Rack 센서 조정을 진행 하려 합니다. 하기와 같이 진행 계획이며 비가동 가능한지 문의드립니다. 1. 셀버퍼#1,2 : 30분 동시다운 2. 셀버퍼#3,4 : 30분 동시다운 May 6, 2025 at 10:14 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) @MCS/RTD team bank : M0STK035 source : 0102001 carrier id : Z301770 Dest EQP unit : M0CNV036_M02 @배병민(Bae Byoungmin) 해당 케리어 아이디가 RTD상에서 배출이 인되고 있습니다. 금일 사외창고 이관품이라 확인 부탁드립니다. @MCS/RTD team The product is not generating RTD commands. Can you manually move it to the M0CNV036_M02 port? May 6, 2025 at 10:14 AM, SKOH2/제조-셀,모듈 출하/김병호 : 어제와 같은 현상입니다 May 6, 2025 at 10:15 AM, 배병민 (Bae Byoungmin) : @김주연 PM님 확인 가능하실까요? May 6, 2025 at 10:15 AM, SKOH2/제조-셀,모듈 출하/김병호 : Unable to generate work order in RTD May 6, 2025 at 10:21 AM, duzzaman Md (MCS) : Job has been created. Monitoring further. Thank you May 6, 2025 at 10:22 AM, duzzaman Md (MCS) : However its being alternated stating that Unit 0102001 is out of service. May 6, 2025 at 10:23 AM, duzzaman Md (MCS) : @SCS kindly check. Thank you May 6, 2025 at 11:02 AM, SKOH2/제조-셀,모듈 출하/김병호 : 오래 걸리실까요 May 6, 2025 at 11:05 AM, SKOH2/제조-셀,모듈 출하/김병호 : 35번뱅크 크레인 알람으로 정지상태입니다. 아무도 없으셔서요 May 6, 2025 at 11:06 AM, SKOH2/제조-셀,모듈 출하/김병호 : 한시간 가까이 제품이 안빠지고 있는데 빠른 확인 부탁드립니다 May 6, 2025 at 11:08 AM, 배병민 (Bae Byoungmin) : 제가 지금 전극 R&R 진행중이라... @FACS_Hyeongi Son @진재정 빠른 확인 해주시고 단톡방에 제발 진행사항 공유좀 해주세요 May 6, 2025 at 11:09 AM, FACS_Hyeongi Son : @duzzaman Md (MCS) There is no catch in SCS Please create a job May 6, 2025 at 11:11 AM, 배병민 (Bae Byoungmin) : @김주연 PM님 어떤 경우인지 확인좀 부탁드립니다 May 6, 2025 at 11:12 AM, duzzaman Md (MCS) : Kindly check the STK M0STK035 Shelf 0102001. The Shelf is OOS. STK is functional. May 6, 2025 at 11:14 AM, FACS_Hyeongi Son : It's normal in SCS May 6, 2025 at 11:14 AM, Sazzad Bhai SKon : Source unit (STK shelf) is out of service May 6, 2025 at 11:15 AM, Sazzad Bhai SKon : 0102001 May 6, 2025 at 11:17 AM, FACS_Hyeongi Son : In CCS, it is generated on M0STK034 May 6, 2025 at 11:19 AM, FACS_Hyeongi Son : You have to create a catch in M0STK035 It‘s not M0STK034 May 6, 2025 at 11:20 AM, duzzaman Md (MCS) : As per MCS, this carrier is in STK 035. Source: M0STK035 Shelf: 0102001 Current Machine: M0STK035 Current unit: 0102001 Destination: M0CNV036_M02 May 6, 2025 at 11:23 AM, Sazzad Bhai SKon : Hi manager, Z301770 is stored at M0STK035, stored at 2nd May May 6, 2025 at 11:27 AM, FACS_Hyeongi Son : I moved it to M0CNV035_p12 now Please transfer this material to M0CNV036_p13 May 6, 2025 at 11:29 AM, Sazzad Bhai SKon : Sorry, P13 is In port. Transport not possible May 6, 2025 at 11:30 AM, FACS_Hyeongi Son : Then Please send it to M0CNV036_M02 May 6, 2025 at 11:32 AM, Sazzad Bhai SKon : Sorry still now not transferrable! Process type not matched. Z301770 is cell pallet short May 6, 2025 at 11:39 AM, FACS_Hyeongi Son : 지금 자재 목적지로 이동중입니다 확인 부탁드립니다 May 6, 2025 at 1:19 PM, 노영일 (Yeongil Noh) : 네 진행 해주시면 됩니다. 30분 내 완료 부탁 드립니다 May 6, 2025 at 1:21 PM, 배병민 (Bae Byoungmin) : 네 감사합니다 May 6, 2025 at 1:31 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#1.2 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 13:31 -End : 5. Remark(special note) : -X May 6, 2025 at 3:03 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#3.4 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 15:03 -End : 5. Remark(special note) : -X May 6, 2025 at 3:27 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.06 2.Machine name : -셀버퍼#3.4 3. Action detail : -1단 파레트 센서 조정 작업 4.Work time -Start : 15:03 -End : 15:26 5. Remark(special note) : -X May 6, 2025 at 5:47 PM, 원승연(Seungyeon Won) : Plz check buffer warehouse#1 May 6, 2025 at 5:49 PM, FACS_Hyeongi Son : 이동 중입니다 May 6, 2025 at 6:12 PM, FACS_Hyeongi Son : 조치했습니다 May 6, 2025 at 6:18 PM, 원승연(Seungyeon Won) : 확인 감사합니다 May 6, 2025 at 7:33 PM, Mohammad Amir : @FA @Csepi Árpád @Édl Tamás Please check M0STK011_P06 and P05 these ports are OOS and because of this AGV#3 (Formation EOL) is waiting. Thank you very much! May 6, 2025 at 7:36 PM, FA-CS-AGV-Masoud : They are here and working on it May 6, 2025 at 7:36 PM, Mohammad Amir : Thank you very much for the update. May 6, 2025 at 8:15 PM, 원승연(Seungyeon Won) : 버퍼창고 #1 이슈로 인해 팔레트 순환 불가능합니다. 우선 AGV 이동 후 메뉴얼 전환하여 지게차 이용하겠습니다. 완료되면 공유 부탁드리겠습니다. 감사합니다. Due to an issue with Buffer Warehouse #1, pallet circulation is not possible. For now, we will move the AGV and switch to manual mode using a forklift. May 6, 2025 at 8:15 PM, 원승연(Seungyeon Won) : @Tklcz Alexandra SL/A @Szentirmai Z. A/SSL May 6, 2025 at 8:51 PM, Magosi Erik : @Mohammad Amir @FA-CS-AGV-Masoud modul line 3 and line 4 do not recieving cell plt. M3MFA300-p01/p03 and M4MFA300-p02/p04. Can You check it why? May 6, 2025 at 8:51 PM, Magosi Erik : Thank You May 6, 2025 at 8:51 PM, Mohammad Amir : Checking May 6, 2025 at 8:53 PM, Mohammad Amir : You are witnessing delays cause O/P ports of M0STK012_P10 is OOS . @FA @Csepi Árpád Please check this port are OOS and it is blocking the Transfer to module line 3 and 4. Thank you very much! May 6, 2025 at 8:53 PM, FA-CS-AGV-Masoud : STK12 had problem we are waiting to problem solve and then the process will started again May 6, 2025 at 8:54 PM, Csepi Árpád : Solved May 6, 2025 at 8:55 PM, Magosi Erik : I talked to @Csepi Árpád they solved the problem. Its gonna be good i guess. Thank You May 6, 2025 at 8:56 PM, Mohammad Amir : Yes now transfer has resumed. ✅ I am monitoring. Thank you very much! May 6, 2025 at 8:56 PM, Mohammad Amir : Thank you very much 🙏 May 6, 2025 at 8:56 PM, 원승연(Seungyeon Won) : 안녕하세요 PM님 17시 30분부터 에러 조치가 지연되고 있는데 어떤 문제인지 확인가능하실까요? @배병민 (Bae Byoungmin) May 6, 2025 at 8:56 PM, Magosi Erik : Thank You May 6, 2025 at 8:56 PM, 배병민 (Bae Byoungmin) : 셀버퍼인가요? May 6, 2025 at 8:57 PM, Mohammad Amir : @Csepi Árpád This error still exists and several AGVs #2,#3,#9 are waiting because of this error. Thank you very much! May 6, 2025 at 8:57 PM, Mohammad Amir : You are welcome! May 6, 2025 at 8:57 PM, 배병민 (Bae Byoungmin) : 지금 조립인데 화성 넘어가볼께요 May 6, 2025 at 8:58 PM, Csepi Árpád : “We are working on fixing the issue!” May 6, 2025 at 8:58 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 9:06 PM, 원승연(Seungyeon Won) : 감사합니다 May 6, 2025 at 9:06 PM, 원승연(Seungyeon Won) : 네 버퍼창고 1입니다 May 6, 2025 at 10:49 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 6, 2025 at 11:12 PM, 원승연(Seungyeon Won) : 버퍼창고 1 해결 됐나요? AGV 모드 전환해도될까요? May 6, 2025 at 11:13 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please answer it May 6, 2025 at 11:14 PM, Noémi (소미) : @Mr.Miti (미티) FA Buffer raktár 1-nél sikerült megoldani a problémát? Az AGV módot megváltoztathatom? May 6, 2025 at 11:14 PM, Mr.Miti (미티) FA : Cell buffer? May 6, 2025 at 11:15 PM, Mr.Miti (미티) FA : Ha igen akkor igen ha minden igaz May 6, 2025 at 11:15 PM, Mr.Miti (미티) FA : Mikor eljöttem a paletta id-t kellett neki megadni már csak May 6, 2025 at 11:15 PM, Noémi (소미) : 셀버퍼창고요? May 6, 2025 at 11:16 PM, FA-CS-AGV-Masoud : The problem still exists we have to wait May 6, 2025 at 11:16 PM, Noémi (소미) : 네, 셀버퍼창고가 해결됐습니다. May 6, 2025 at 11:16 PM, Mr.Miti (미티) FA : Akkor most egy ugyan arról beszélünk? May 6, 2025 at 11:16 PM, Mr.Miti (미티) FA : Pillanat felhívom a modulos kollégát May 6, 2025 at 11:18 PM, Noémi (소미) : 제가 셀버퍼창고 쪽에서 나갈때 팔레트 ID만 등록하시면 됐습니다. May 6, 2025 at 11:19 PM, Noémi (소미) : 잠시만요, 저 모듈 담당자께 한번 전화해보겠습니다. May 6, 2025 at 11:23 PM, 배병민 (Bae Byoungmin) : 해결안됫습니다 May 6, 2025 at 11:23 PM, Mr.Miti (미티) FA : Nahh so! Mr.Bae is still on site and is trying to put the data in place with the technicians. It is not possible to use agv mode yet. We would like to ask for a little patience. May 6, 2025 at 11:24 PM, Noémi (소미) : Még nem sikerült megoldani May 6, 2025 at 11:56 PM, Tklcz Alexandra SL/A : Please move EOL AGV5 May 6, 2025 at 11:56 PM, FA-CS-AGV-Masoud : Sure May 7, 2025 at 1:41 AM May 7, 2025 at 1:41 AM, 이재근(lee jae geun) : Please move EOL AGV9 May 7, 2025 at 1:42 AM, FA-CS-AGV-Masoud : Sure May 7, 2025 at 1:44 AM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) Cell buffer 창고 정상화되었습니다 AGV 사용으로 부탁합니다 May 7, 2025 at 1:44 AM, 원승연(Seungyeon Won) : 감사합니다. 정상 가동 유무 확인해보겠습니다. May 7, 2025 at 1:44 AM, 원승연(Seungyeon Won) : @Tklcz Alexandra SL/A 4,5,6,9,10 AGV MODE START May 7, 2025 at 1:47 AM, FA-CS-AGV-Masoud : 8 ,2,6,4 is also start May 7, 2025 at 3:13 AM, Tklcz Alexandra SL/A : Technikai segítséget kérünk a boxpackingre. May 7, 2025 at 3:14 AM, Tklcz Alexandra SL/A : Side label problem. May 7, 2025 at 4:02 AM, Szentirmai Z. A/SSL : @배병민 (Bae Byoungmin) We need PLC help on the box packing machine. Can you help or have you already gone home May 7, 2025 at 4:12 AM, Szentirmai Z. A/SSL : Box packing: When applying the second label, the side labeler #2 removes the vacuum ~10cm before reaching the adhesive surface from the label application tool due to a control error. Resetting the PLC didn't solve the problem either. At present, we cannot operate the box packing machine. May 7, 2025 at 4:16 AM, Szentirmai Z. A/SSL : @Csepi Árpád A 2-es AGV nem tudja betölteni a következő palettát a box packing gépbe az ismert hiba miatt és már időtúllépés miatt hibát jelez. Nem tudom, hogy ez fog-e máshol hibát okozni, de nem árt ha tudtok róla May 7, 2025 at 4:17 AM, FA-CS-AGV-Masoud : Im coming to check May 7, 2025 at 4:24 AM, FA-CS-AGV-Masoud : As I observed earlier same as right now and also mentioned it before : its not AGV problem because until port is full,AGV cannot deliver the pallet to the port. Thanks May 7, 2025 at 4:25 AM, 배병민 (Bae Byoungmin) : I've already left work now. I'll check in the morning. May 7, 2025 at 4:26 AM, 배병민 (Bae Byoungmin) : Can you retrieve the cargo on the AGV and put it back in the warehouse? Please put it back in the warehouse. May 7, 2025 at 4:29 AM, FA-CS-AGV-Masoud : @Mohammad Amir could you please sent back AGV2 in module to the warehouse with this carrier id Z302051 ? May 7, 2025 at 4:29 AM, Mohammad Amir : Checking May 7, 2025 at 4:32 AM, Szentirmai Z. A/SSL : Thank you May 7, 2025 at 4:35 AM, Mohammad Amir : @이주봉PM LEE JUBONG(FA) Sir, Could you please cancel job for Z302051 from ACS side as well. Afterwards I will send it back to source Warehouse. Location -M0MGV012_VC02.(GF Cell Buffer) Thank you very much! May 7, 2025 at 4:38 AM, Szentirmai Z. A/SSL : Additional palettes are released from the cell buffer to the box packing. Won't that be a problem? May 7, 2025 at 4:39 AM, FA-CS-AGV-Masoud : We will try to carry out the delivery through the system. If that doesn’t work, we will use a forklift instead. May 7, 2025 at 4:40 AM, Szentirmai Z. A/SSL : If you need my help, let me know May 7, 2025 at 4:41 AM, 김지현(Ji Hyun KIM) : Pm님 이거 하나 배출하고 해볼까 하는데 주의해야할거 있나요? May 7, 2025 at 4:43 AM, FA-CS-AGV-Masoud : Sure Thanks May 7, 2025 at 4:47 AM, 배병민 (Bae Byoungmin) : AGV 말씀이신가요? May 7, 2025 at 4:47 AM, Mohammad Amir : For your information:- MCS can't execute the job to send this carrier back to source warehouse as there is still a job exists for this carrier in ACS. I have already requested dear PM to cancel this job form ACS as soon as he will cancel the job I will send it back to warehouse. Thank you very much! May 7, 2025 at 4:49 AM, FA-CS-AGV-Masoud : Yes i saw your request already thank you for the information. May 7, 2025 at 4:50 AM, Mohammad Amir : You are welcome! May 7, 2025 at 5:01 AM, FA-CS-AGV-Masoud : Could you please come to box packing ? May 7, 2025 at 5:02 AM, Mohammad Amir : This message was deleted. May 7, 2025 at 5:03 AM, Mohammad Amir : This message was deleted. May 7, 2025 at 5:03 AM, Szentirmai Z. A/SSL : I go May 7, 2025 at 5:09 AM, 김지현(Ji Hyun KIM) : 박스패킹 가동중입니다. 참고부탁드립니다. May 7, 2025 at 5:09 AM, FA-CS-AGV-Masoud : The box packing port box was emptied, and the AGV successfully unloaded Z302051 to the port. Thanks May 7, 2025 at 5:09 AM, Mohammad Amir : Thank you very much for the update. May 7, 2025 at 5:49 AM, Tklcz Alexandra SL/A : Please check AGV4 EOL May 7, 2025 at 5:49 AM, FA/CS/AGV/Taimur : Checking. Thank you May 7, 2025 at 5:59 AM, FA/CS/AGV/Taimur : Solved. May 7, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 7, 2025 at 6:53 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 7 Time: 06:00~18:00 1. Jeong Woo-jun May 7, 2025 at 7:08 AM, Szijjártó Balázs : Morning! Modulon az alapanyag lift nem megy, nem jön az anyag! May 7, 2025 at 7:08 AM, N.Gábor F.A. : Hello Hajnal óta nem működik a második emelet ezért nincs anyag ellátás May 7, 2025 at 7:09 AM, Szijjártó Balázs : Csodás... May 7, 2025 at 7:50 AM, FACS_Hyeongi Son : @SL I need a forklift in the box packing machine Please come here and help me May 7, 2025 at 7:55 AM, Éváné Bori Viktória : Helló! Eol AGV 4 move please May 7, 2025 at 7:55 AM, FA/CS/AGV/Taimur : Sure. May 7, 2025 at 7:55 AM, Éváné Bori Viktória : The palettes not comming for 6 line. May 7, 2025 at 8:00 AM, FA/CS/AGV/Taimur : AGV: 02 on the way. Thank you May 7, 2025 at 8:01 AM, FACS_JaewonShin : ■ 7th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi Daily(12:00 - 18:00) : 2 people - PLC Control 2 Jin taehyeong Jin jaejeong May 7, 2025 at 8:10 AM, Éváné Bori Viktória : Thank you May 7, 2025 at 8:22 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK011 “Crane fork1 No response error” Thank you May 7, 2025 at 8:26 AM, 유경호(RYU KYEONGHO) : In buffer #2, Z302042 and Z302043 are not being released to the box packing machine. May 7, 2025 at 8:28 AM, Shahbaz 샤바즈 MCS/RTD : Z0302041 is already in AGV#03 and Z0302043 is on stocker output port for transfer. May 7, 2025 at 8:31 AM, 유경호(RYU KYEONGHO) : thank you May 7, 2025 at 9:18 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team M0STK035 1F 제품 배출이 되지 않고 있어서 확인부탁드립니다. May 7, 2025 at 9:19 AM, FACS_Hyeongi Son : 이동중입니다 May 7, 2025 at 9:23 AM, FACS_Hyeongi Son : 조치 완료했습미다 May 7, 2025 at 10:50 AM, Őri Imre : Üdv. 8 line nem viszi az AGV az üres palettákat. Megnéznétek? Thx. May 7, 2025 at 10:51 AM, Sazzad Bhai SKon : Stacking or VD? May 7, 2025 at 10:51 AM, N.Gábor F.A. : Mindjárt megyünk May 7, 2025 at 10:51 AM, N.Gábor F.A. : Modul May 7, 2025 at 10:53 AM, Sazzad Bhai SKon : M8MFA300_P05? There is no load request. May 7, 2025 at 10:57 AM, Sazzad Bhai SKon : Moreover, P05 is in Manual mode. May 7, 2025 at 10:58 AM, N.Gábor F.A. : Not P05 It's P01 & P03 May 7, 2025 at 10:58 AM, Sazzad Bhai SKon : Same, all ports are in Manual mode May 7, 2025 at 11:00 AM, N.Gábor F.A. : Now it's auto but the agv is not coming May 7, 2025 at 11:09 AM, [민겸]MinGyum : GF buffer Error code 1180 확인 요청드립니다. May 7, 2025 at 11:15 AM, FACS_Hyeongi Son : 정상가동중입니다 May 7, 2025 at 11:17 AM, [민겸]MinGyum : 확인 감사합니다. May 7, 2025 at 11:24 AM, [민겸]MinGyum : 다시 한번 확인 바랍니다. May 7, 2025 at 11:29 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민(Bae Byoungmin) @MCS/RTD team bank : M0STK035 source : 0101601 carrier id : Z301905 bank : M0STK035 source : 0102002 carrier id : Z301940 Dest EQP unit : M0CNV036_M02 @배병민(Bae Byoungmin) 해당 케리어 아이디가 RTD상에서 배출이 인되고 있습니다. 금일 사외창고 이관품이라 확인 부탁드립니다. @MCS/RTD team The product is not generating RTD commands. Can you manually move it to the M0CNV036_M02 port? May 7, 2025 at 11:32 AM, FACS_Hyeongi Son : 이동중입니다 May 7, 2025 at 11:33 AM, Sazzad Bhai SKon : We'll check May 7, 2025 at 11:37 AM, Shahbaz 샤바즈 MCS/RTD : The transfer is not proceeding because shelf M0STK035_0102002 is OOS, please check it. Thank you May 7, 2025 at 11:39 AM, Shahbaz 샤바즈 MCS/RTD : M0STK035_0101601 is OOS as well. May 7, 2025 at 11:41 AM, FACS_Hyeongi Son : 지금 메뉴얼로 물류 반송중입니다 May 7, 2025 at 11:55 AM, FACS_Hyeongi Son : 조치완료했습니다 May 7, 2025 at 12:39 PM, Éváné Bori Viktória : Helló! Eol AGV 9 ACS alive alarm . Move please. May 7, 2025 at 12:39 PM, FA/CS/AGV/Taimur : Checking May 7, 2025 at 12:43 PM, FA/CS/AGV/Taimur : Clear. May 7, 2025 at 2:51 PM, Éváné Bori Viktória : Helló! EOL 4-6 AGV not comming with the palettes May 7, 2025 at 2:58 PM, Őri Imre : Sziasztok! 8 sor felső burkolat gentry megint leált! Ugyanaz a hiba mint az előbb amit mókoltak a Koreai PLC sek! Köszi May 7, 2025 at 3:00 PM, N.Gábor F.A. : Meg kérem a PLC s kollégákat nézzék meg May 7, 2025 at 3:05 PM, Duna Don : AGV#1 is on the way May 7, 2025 at 3:30 PM, FACS_Hyeongi Son : @SL The order of putting the parlet in the manual input of cell buffer No. 3 is wrong Have to take out the cargo with the forklift and put it back in May 7, 2025 at 3:32 PM, FACS_Hyeongi Son : @Éváné Bori Viktória May 7, 2025 at 5:57 PM, Halász György SL : Hi, Modul 1F line8 modul unloading AGV delayed. May 7, 2025 at 5:58 PM, FA CS AGV David 데이비드 : Coming May 7, 2025 at 5:58 PM, Halász György SL : Thanks May 7, 2025 at 5:59 PM, Halász György SL : Solved May 7, 2025 at 6:08 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 8as AGV áll a 9es sorral szemben. Kérlek nézzétek meg May 7, 2025 at 6:08 PM, FA CS AGV David 데이비드 : Coming May 7, 2025 at 6:10 PM, FA CS AGV David 데이비드 : Solved May 7, 2025 at 6:33 PM, R. József C SL EOL : Gyertek kérlek eol 6 sorhoz 6os agv útban van a 4-es agvnek May 7, 2025 at 6:34 PM, FA CS AGV David 데이비드 : Coming May 7, 2025 at 6:56 PM, VK (mcs) : @FA There is transfer command to 4th Line module assembly Port 21 M4MFA300-P21 Port is Out of service. Please confirm. May 7, 2025 at 6:59 PM, Döme György F.A : Checking May 7, 2025 at 7:03 PM, Döme György F.A : Yes. There is still material at port P21, it is not empty. Could you please delete that command? I think they wanted to request material for port P20. May 7, 2025 at 7:03 PM, VK (mcs) : Sure. Thank you for checking May 7, 2025 at 9:12 PM, Halász György SL : Hi, Modul GF line3 AGV alarm May 7, 2025 at 9:13 PM, FA CS AGV David 데이비드 : Checking May 7, 2025 at 9:15 PM, FA CS AGV David 데이비드 : Solved May 7, 2025 at 11:33 PM, FA CS AGV David 데이비드 : @FA can someone please check the left crane, there's an cv data mismatch nothing error and a fork right overrun detect error. May 7, 2025 at 11:34 PM, Döme György F.A : Coming May 7, 2025 at 11:35 PM, FA CS AGV David 데이비드 : Thank you May 7, 2025 at 11:55 PM, 원승연(Seungyeon Won) : 버퍼창고 1번 스태커크레인 어제와 동일한 증상인 것 같습니다. 확인 부탁드립니다. It seems that Stacker Crane No. 1 in the buffer warehouse is showing the same symptoms as yesterday. Please check it. May 8, 2025 at 12:32 AM May 8, 2025 at 12:32 AM, 최기수(GI SU CHOI) : An alarm was triggered on AGV5 in front of EOL 6Line May 8, 2025 at 12:35 AM, FA CS AGV David 데이비드 : Solved May 8, 2025 at 12:51 AM, Halász György SL : Hi, Modul Gf line3,4 AGV error May 8, 2025 at 12:58 AM, FA CS AGV David 데이비드 : Solved May 8, 2025 at 1:15 AM, Halász György SL : Hi, Modul Gf line3,4 AGV error May 8, 2025 at 1:15 AM, Halász György SL : Lift error May 8, 2025 at 1:15 AM, FA CS AGV David 데이비드 : Coming May 8, 2025 at 1:16 AM, Halász György SL : Thanks May 8, 2025 at 1:20 AM, FA CS AGV David 데이비드 : Checked and there's no error on the AGV lift but the conveyor lift. Apparently it's being worked on on the 1F end. May 8, 2025 at 1:20 AM, FA CS AGV David 데이비드 : @FA can also check and confirm May 8, 2025 at 1:24 AM, Döme György F.A : I am currently on the 2nd floor, and the elevator inverter keeps shutting down. I have already reported the issue and am waiting for assistance from the Korean technician. May 8, 2025 at 1:24 AM, FA CS AGV David 데이비드 : Okay thanks May 8, 2025 at 1:26 AM, Sarvajcz Ferenc FA : Egyenlőre részleges hiba/megállás lesz, amíg a 23 as szakasz jó nem lesz. May 8, 2025 at 1:28 AM, Halász György SL : Rendben May 8, 2025 at 2:02 AM, 원승연(Seungyeon Won) : We won’t be able to resolve the issue with Buffer Warehouse #1 during the night shift today. Therefore, if it’s confirmed that pallets are not arriving, please use a forklift to supply the pallets. @EOL SL @Sási Zsolt SL/C/ EOL @R. József C SL EOL May 8, 2025 at 2:47 AM, 원승연(Seungyeon Won) : Why is Buffer Warehouse #2 not progressing? Is it due to the issue caused by exceeding 98% of the storage capacity? May 8, 2025 at 2:49 AM, VK (mcs) : I informed to @FA team in other group to check carrier in port 11. It’s not moving I will inform them again. May 8, 2025 at 2:56 AM, VK (mcs) : And yes currently capacity in STK 12 is 99% And some jobs are alternated due to STK 11 is OoS. May 8, 2025 at 3:13 AM, 원승연(Seungyeon Won) : Ok thanks Does that mean it’s currently impossible to feed in? If so, I will remove the pallets in front of the conveyor. May 8, 2025 at 3:16 AM, Döme György F.A : The buffer of cell 2 is working. Sorry, we were dealing with a problem on the 2nd floor of the module. May 8, 2025 at 3:18 AM, VK (mcs) : According to FA technicians , problem is solved. If job generated to STK 12 yes it is not possible to store it but otherwise it will transfer to others. I will monitor it. May 8, 2025 at 3:22 AM, VK (mcs) : Now it seems operating smoothly. Thank you May 8, 2025 at 3:32 AM, 원승연(Seungyeon Won) : It’s working normally now. Thanks for checking! May 8, 2025 at 3:33 AM, VK (mcs) : Most welcome May 8, 2025 at 5:57 AM, 원승연(Seungyeon Won) : 주간에 버퍼창고 #1 조치되면 공유부탁드립니다. 감사합니다. May 8, 2025 at 6:14 AM, 배병민 (Bae Byoungmin) : 네 제가 가는 중입니다 전일하고는 전혀 다른 오류네요 May 8, 2025 at 6:54 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András, Kiss Balázs Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsokt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 8, 2025 at 7:03 AM, Őri Imre : Jó reggelt! Modul 3 sornál kellene segítség nekem az alsó burkolatnál! Köszönöm May 8, 2025 at 7:07 AM, Őri Imre : Solved May 8, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team M0STK035 1F M0CNV036_P13_BP01 알람발생으로 기동 중지 상태입니다 빠른 확인 부탁드립니다 May 8, 2025 at 8:50 AM, 배병민 (Bae Byoungmin) : 네 인원 바로가겠습니다 May 8, 2025 at 8:56 AM, FACS_Hyeongi Son : 조치 완료했습니다 May 8, 2025 at 9:01 AM, FACS_TaehyeongJin : @mcs M0CNV023 Carrier id PF221-2504230007 PS22A-2504250247 Since the job is not created, the carrier behind it cannot move Plz check May 8, 2025 at 9:03 AM, 배병민 (Bae Byoungmin) : @VK (mcs) Please check May 8, 2025 at 9:09 AM, Shahbaz 샤바즈 MCS/RTD : The transfer command was terminated earlier on request. May 8, 2025 at 9:10 AM, FACS_TaehyeongJin : Make a job plz May 8, 2025 at 9:15 AM, Shahbaz 샤바즈 MCS/RTD : Transfer created back to the stocker for both. May 8, 2025 at 9:23 AM, Szabolcs : @FA M0CNV036 1F problem. Check please. May 8, 2025 at 10:23 AM, FA/CS/AGV/Taimur : @Shahbaz 샤바즈 MCS/RTD please return agv:01 from RM 3,4 line GF BACK TO stoker thank you May 8, 2025 at 10:26 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created. May 8, 2025 at 3:13 PM, SKOH2/제조-셀,모듈 출하/김병호 : 모듈 자동화 입구 포트 GF RTV 정지 상태라 확인 부탁드립니다. May 8, 2025 at 3:14 PM, FACS_Youngmin LEE : 네 가겠습니다. May 8, 2025 at 3:14 PM, SKOH2/제조-셀,모듈 출하/김병호 : 현지 태크니셤분이 조치해쥬셨습니다 May 8, 2025 at 6:26 PM, R. József C SL EOL : @Zoltán Harasztia FA @Döme György F.A Hallo Előreláthatólag egész este megy a boxpacking May 8, 2025 at 6:27 PM, Sarvajcz Ferenc FA : En mar figyelem! May 8, 2025 at 6:27 PM, Zoltán Harasztia FA : Figyelünk May 8, 2025 at 6:28 PM, R. József C SL EOL : Köszönöm May 8, 2025 at 10:34 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Sidecover vacuum hiba van May 9, 2025 at 1:39 AM May 9, 2025 at 1:39 AM, FA CS AGV David 데이비드 : @FA can someone please check out the error on the north side. Fork 1 no response error. Thank you May 9, 2025 at 1:53 AM, FA CS AGV David 데이비드 : @FA There's another error on the same side. This time it's a crane move timeout error. Please check. Thanks May 9, 2025 at 1:54 AM, Sási Zsolt SL/C/ EOL : Gyertek légyszíves az 1#bufferhez. Beriasztott May 9, 2025 at 1:54 AM, Döme György F.A : Most nyugtáztam ki May 9, 2025 at 3:49 AM, FA CS AGV David 데이비드 : The left crane on the north side doesn't seem to be responsive. There's no error alarm but it's been stuck in one place for a while. Can someone please check? @FA May 9, 2025 at 5:36 AM, KIM SEYEON [김세연]_FA : was it solved? May 9, 2025 at 5:37 AM, FA CS AGV David 데이비드 : Yes it was solved shortly after May 9, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 9, 2025 at 6:04 AM, 방혁 PM(Bang.Hyuk) FA : Day Shift FA Technician Schedule Date: 25. May. 9 Time: 06:00~18:00 1. BANG HYUK May 9, 2025 at 7:57 AM, FACS_JaewonShin : ■ 9th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 9, 2025 at 9:16 AM, Szabolcs : @FA M0CNV036 1F problem. Check please. May 9, 2025 at 9:16 AM, FACS_Hyeongi Son : Going May 9, 2025 at 9:21 AM, FACS_Hyeongi Son : Solved May 9, 2025 at 9:34 AM, 요셉 : Please move the EOL 3L front agv to the side. Thank you. May 9, 2025 at 9:34 AM, FA CS AGV Jawad : Sure May 9, 2025 at 9:44 AM, FA CS AGV Jawad : Done May 9, 2025 at 10:59 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @심정민 (Shim Jungmin) 화성 Cell buffer 2번창고 지난 천장 누수 이벤트건 보수작업 완료되어 누수구간 최종 점검 후 재기동 진행하겠습니다. 2번창고 15분정도 비가동 발생되겠습니다. May 9, 2025 at 11:16 AM, Szabolcs : @FA M0STK035_C01 crane problem. Check please. May 9, 2025 at 11:18 AM, Denkó Jani (F.A.) : Már megy 🕺🏻 May 9, 2025 at 11:19 AM, 배병민 (Bae Byoungmin) : 점검 완료 되어 재기동 시작하였습니다. 누수구간 물기 없는거 확인 되어 해당 Rack 구간 열연 감지 센서 재 설치하였으며 센서 정상동작여부 이상없이 작동중입니다. 누수로 인한 disable 10열,11열,12열 구간 전체 투입되도록 해지 하겠습니다 May 9, 2025 at 2:41 PM, Tóth Gyula : MOCNV033 M_02 állomáson nem mennek be a Dunnagèk. May 9, 2025 at 2:41 PM, Tóth Gyula : @Denkó Jani (F.A.) Help ME... May 9, 2025 at 2:42 PM, Boromisza Zoltán : Megyünk May 9, 2025 at 2:42 PM, Denkó Jani (F.A.) : Megyek vezérem 😁😁💪🏻 May 9, 2025 at 2:47 PM, Denkó Jani (F.A.) : Solved May 9, 2025 at 3:06 PM, FACS_Hyeongi Son : @mcs U013402 M0STK032->M0CNV035 U013414 M0STK038->M0CNV035 U013427 M0STK033->M0CNV035 Please move these products May 9, 2025 at 3:10 PM, Sazzad Bhai SKon : Process type is different. Carrier is Module pallet short. But destination M0CNV035 is only pallet. So process type mismatched May 9, 2025 at 3:11 PM, FACS_Hyeongi Son : U013428 -M0STK037 U03450 -M0STK033 U013358 -M0STK038 Send these products to the manual port on the 1st floor May 9, 2025 at 3:11 PM, FACS_Hyeongi Son : @mcs May 9, 2025 at 3:11 PM, FACS_Hyeongi Son : Just send it to the manual port on 1F May 9, 2025 at 3:12 PM, FACS_Hyeongi Son : *U013458 May 9, 2025 at 3:13 PM, Sazzad Bhai SKon : Sorry process type is different. Command could not executed May 9, 2025 at 3:14 PM, FACS_Hyeongi Son : We'll just take care of it Thank you May 9, 2025 at 3:24 PM, Tóth Gyula : MOCNV033 M_02 állomáson nem mennek be a Dunnagèk. May 9, 2025 at 3:25 PM, Tóth Gyula : @Denkó Jani (F.A.) Help ME... May 9, 2025 at 3:25 PM, Boromisza Zoltán : Úton May 9, 2025 at 4:36 PM, Tóth Gyula : Mèg mindig semmi? May 9, 2025 at 4:39 PM, Denkó Jani (F.A.) : Semmi ,meg fektették a rendszert elég szépen... May 9, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 9, 2025 at 9:03 PM, 한상범(Han Sang Beom) : No Empty pallets on 10 line, please check. @FA May 9, 2025 at 9:03 PM, Mohammad Amir : Checking May 9, 2025 at 9:07 PM, Mohammad Amir : @Csepi Árpád Please check Z302289 it has job to go to line-10 EOL (Empty )located at M0STK013(0202503) ,it is not moving. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! May 9, 2025 at 9:16 PM, Csepi Árpád : Hello! Please repeat the task: ID: Z302289 has a job to go to Line-10 EOL. May 9, 2025 at 9:17 PM, Csepi Árpád : I have deleted the paused task! May 9, 2025 at 9:17 PM, Csepi Árpád : It should already be in progress! May 9, 2025 at 9:18 PM, Mohammad Amir : Job has created again . ✅ Monitoring the process. Thank you very much! May 9, 2025 at 9:18 PM, Csepi Árpád : Okay May 9, 2025 at 9:21 PM, Mohammad Amir : Please check this shelf M0STK013(0202503) , everything is good from MCS/RTD side . ✅ But this carrier still not moving,please check physically. Thank you very much! May 9, 2025 at 9:31 PM, Csepi Árpád : As I see, the STK 013-C02 crane is not assigned as the transporter! In the SCS system, the SC_NO is set to a null value. May 9, 2025 at 9:37 PM, Mohammad Amir : Please check this issue,it could be blocking the transfer from SCS side. If production is getting affected and you need empty pallet urgently, please also inform me. Thank you very much! May 9, 2025 at 10:34 PM, Mohammad Amir : Issue has been resolved. ✅ Now empty pallet supply has been normalized at line -10 EOL . Thank you very much! May 10, 2025 at 2:02 AM May 10, 2025 at 2:02 AM, Mohammad Amir : @Brázik János @FA Please check M0STK011_C02 there is Crane Fork 1 no response error. Thank you very much! May 10, 2025 at 2:09 AM, Szentirmai Z. A/SSL : @Csepi Árpád Indult a Box packing, egyenlőre hibamentes 😉 May 10, 2025 at 2:10 AM, Csepi Árpád : Örülünk! Köszi szépen az infót. May 10, 2025 at 2:22 AM, Mohammad Amir : @Csepi Árpád @Brázik János Please check M0STK014_M01 there is Home return fail error. Thank you very much! May 10, 2025 at 2:30 AM, Szentirmai Z. A/SSL : Sziasztok! Cell Buffer#1 - M0STK011_P06-ról nem viszi be a készterméket a stacker, ezért a következőt nem tudja betárolni az AGV. May 10, 2025 at 2:30 AM, Szentirmai Z. A/SSL : Nézzetek rá kérlek May 10, 2025 at 2:41 AM, Brázik János : Solved May 10, 2025 at 2:42 AM, Mohammad Amir : Thank you very much! May 10, 2025 at 3:09 AM, Csepi Árpád : Solved May 10, 2025 at 3:46 AM, Szentirmai Z. A/SSL : @Édl Tamás Buffer#1 M0STK011_P06 Hibát megoldottam. May 10, 2025 at 3:57 AM, 조성준/samkoo/공정-FA : @Mohammad Amir No 4-line empty pallet May 10, 2025 at 3:57 AM, Mohammad Amir : Checking Sir. May 10, 2025 at 3:59 AM, Sánta László : @Csepi Árpád kérlek nézd meg a négyes sor block 1 elejében hibában álló AGVt. Az üres raklapot húzta be, már bent van a helyén, de nem érzékeli. May 10, 2025 at 3:59 AM, Sánta László : Köszönöm May 10, 2025 at 4:01 AM, Mohammad Amir : Dear Sir, Last job was cancelled by the Operator at 3:01 ,it was destined to go to Line-4 EOL P01. Please press LR again. I am monitoring. Thank you very much! May 10, 2025 at 4:01 AM, FA-CS-AGV-Masoud : Solved May 10, 2025 at 4:18 AM, Sánta László : Thank you! May 10, 2025 at 4:21 AM, Szentirmai Z. A/SSL : I switched the delivery to F4CPM010_P01 to automatic operation again May 10, 2025 at 4:22 AM, Mohammad Amir : Issue has been resolved ✅. LR received successfully at 4:18. Empty pallet T704237 on the way for EOL-4 . I am monitoring. Thank you very much! May 10, 2025 at 4:23 AM, Mohammad Amir : Dear Sir @조성준/samkoo/공정-FA For you information. Thank you very much! May 10, 2025 at 4:24 AM, 조성준/samkoo/공정-FA : Thank you for your prompt action. May 10, 2025 at 4:24 AM, Mohammad Amir : You are welcome! May 10, 2025 at 4:26 AM, Szentirmai Z. A/SSL : It is already supplied by the AGV. Thank you May 10, 2025 at 4:27 AM, Mohammad Amir : You are welcome! May 10, 2025 at 4:28 AM, Mohammad Amir : Sir, Empty pallet delivery to EOL-4 has been normalized ✅. Empty pallet T704237 has arrived EOL-4 P01 successfully. If you face any further issues ,feel free to contact me again. Thank you very much! May 10, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 7/12 Tech, 1Sl Overtime(0): Holiday(3): Pintye Miklós, Kovács Ágnes, Boromisza Zoltán Sick(2): Gerbovits Kevin, BöröczbTamás --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(1): Denkó János --------------- The number of technicians is low. In all areas. May 10, 2025 at 8:09 AM, 원승연(Seungyeon Won) : The pallet is not arriving at Line 5. Please check.” May 10, 2025 at 8:11 AM, Shahbaz 샤바즈 MCS/RTD : @FA There is already a transfer command for T704809 from cell buffer M0STK011. Please check. Thank you May 10, 2025 at 8:24 AM, Denkó Jani (F.A.) : Solved May 10, 2025 at 8:24 AM, 원승연(Seungyeon Won) : Z302302 The Pallet is at Line 9 Packing, but the information is in the AGV OUT port. May 10, 2025 at 8:25 AM, Denkó Jani (F.A.) : Ok May 10, 2025 at 1:09 PM, Horváth László SL/B : Please check AGV #3 at the EOL. ACS Alive Alarm. Thank you. May 10, 2025 at 1:09 PM, FA CS AGV Jawad : I check ir May 10, 2025 at 1:13 PM, FA CS AGV Jawad : Solved May 10, 2025 at 1:13 PM, Horváth László SL/B : Thank you May 10, 2025 at 2:34 PM, Nikolett SL/B EOL : Sziasztok GF Buffer MCP REAR DOOR OPEN hibára állt ki Kérlek gyertek és nézzétek meg Köszönöm May 10, 2025 at 2:35 PM, Denkó Jani (F.A.) : Door open, tehát nyitva az ajtó,mert bent vagyok 🫡😁 May 10, 2025 at 2:36 PM, Nikolett SL/B EOL : De ne bújkálj 🙄 May 10, 2025 at 2:36 PM, Szücs Géza FT-B : a daru maradjon bent 😉😂 May 10, 2025 at 2:36 PM, Vadász Dóra SSL/B : Te vagy az, Copperfield?! May 10, 2025 at 2:37 PM, Denkó Jani (F.A.) : I am 🕺🏻🥸😎 May 10, 2025 at 2:49 PM, 원승연(Seungyeon Won) : 오늘도 버퍼창고 #1 MISMATCH 에러 발생했습니다. 우선 파레트 공급 안되어 메뉴얼 투입 진행하겠습니다. Since the pallets are not being supplied, we will proceed with manual loading. @Nikolett SL/B EOL @심정민 (Shim Jungmin) @배병민 (Bae Byoungmin) May 10, 2025 at 2:49 PM, 원승연(Seungyeon Won) : @Nikolett SL/B EOL Niki, 10Line Manual input first May 10, 2025 at 2:50 PM, 배병민 (Bae Byoungmin) : 지금 전극인데 조금있다가 화성 들려서 해결해드리겠습니다 May 10, 2025 at 2:52 PM, 원승연(Seungyeon Won) : 감사합니다 May 10, 2025 at 3:08 PM, Denkó Jani (F.A.) : Kijöttem,becsuktam az ajtót,megy minden 😁 😅 May 10, 2025 at 3:10 PM, Nikolett SL/B EOL : Nagyon jó 😁😁 May 10, 2025 at 3:20 PM, 원승연(Seungyeon Won) : Unfortunately, the M0STK011_P06 pallet is not loading. The issue still persists. May 10, 2025 at 3:24 PM, 배병민 (Bae Byoungmin) : 조치 완료 되었습니다 May 10, 2025 at 4:52 PM, Nikolett SL/B EOL : Sziasztok 6 Line előtt áll egy AGV ami útba van valaki arrébb tudna küldeni ? Köszönöm May 10, 2025 at 4:57 PM, FA CS AGV Jawad : Yes sure May 10, 2025 at 4:58 PM, FA CS AGV Jawad : AGV automoved. May 10, 2025 at 5:42 PM, Nikolett SL/B EOL : Eol 9 Line előtt 1 AGV hibára állt ki Bufferbe tette volna be a Palettát de a hiba miatt nem történt meg Kérlek jöjjön valaki Köszönöm May 10, 2025 at 5:43 PM, FA-CS-AGV-Masoud : Coming May 10, 2025 at 5:45 PM, FA-CS-AGV-Masoud : Solved May 10, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 7:03 PM, Tklcz Alexandra SL/A : Hi! Please check EOL3 buffer AGV11 error. May 10, 2025 at 7:04 PM, FA-CS-AGV-Masoud : Coming May 10, 2025 at 7:07 PM, FA-CS-AGV-Masoud : Solved May 10, 2025 at 7:07 PM, Tklcz Alexandra SL/A : Thanks! May 10, 2025 at 7:17 PM, Tklcz Alexandra SL/A : Mostk013-STK-OP#3 not run. AGV does not bring the palette from here. May 10, 2025 at 7:23 PM, Tklcz Alexandra SL/A : Please check. AGV doesn't bring palette to EOL6. May 10, 2025 at 7:23 PM, Mohammad Amir : Checking May 10, 2025 at 7:26 PM, Mohammad Amir : @FA Please check R110633 it has job to go to EOL-6,it is located at M0STK013(0102105) it is not moving everything seems good from MCS RTD side ✅. It seems like yesterday issue, @Csepi Árpád please check physically. Thank you very much! May 10, 2025 at 7:47 PM, Csepi Árpád : Okay May 10, 2025 at 7:53 PM, Csepi Árpád : Solved May 10, 2025 at 7:53 PM, Mohammad Amir : Thank you very much 🙏! May 10, 2025 at 7:53 PM, Mohammad Amir : Hello, Empty pallets delivery to EOL-6 line has been normalized. ✅ I am monitoring. Thank you very much! May 10, 2025 at 8:06 PM, Mohammad Amir : @FA @Brázik János Please check M0STK012_C01 ,there is carriage get,put Load check error. Thank you very much! May 10, 2025 at 8:24 PM, Brázik János : Solved May 10, 2025 at 8:24 PM, Mohammad Amir : Thank you very much! May 10, 2025 at 11:25 PM, Szentirmai Z. A/SSL : @Csepi Árpád Box packingon kérnénk segítséget a dupla pántolónál. A gép "rövid pántolószalag" hibával megállt, de a tekercsen még bőven van. Nézzétek meg légyszíves. Köszi May 11, 2025 at 1:42 AM May 11, 2025 at 1:42 AM, Csepi Árpád : Javítva! May 11, 2025 at 1:45 AM, Szentirmai Z. A/SSL : This message was deleted. May 11, 2025 at 1:45 AM, Szentirmai Z. A/SSL : Photo May 11, 2025 at 2:36 AM, Tklcz Alexandra SL/A : Box packing Need technical support Mes message 19 ng pallet R110641 May 11, 2025 at 2:42 AM, Tklcz Alexandra SL/A : Technikust kérünk a boxpackingre: Top cover alarm f22802 tc tr servo error. May 11, 2025 at 2:43 AM, Szentirmai Z. A/SSL : @Csepi Árpád Levesszük targival. Megnéztem, a 19-es hobakód a "pallet weight" azzal meg úgy srm tudtok mit csinálni May 11, 2025 at 2:48 AM, Szentirmai Z. A/SSL : Ezen rajta vagyok, de azért inkább gyertek 😉 May 11, 2025 at 2:48 AM, Szentirmai Z. A/SSL : @Csepi Árpád May 11, 2025 at 5:22 AM, Tklcz Alexandra SL/A : Box packing F04231 align alarm tc. Technikust kérünk. May 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12+1+1 Tech, 1Sl Overtime(0): Holiday(2): Kovács Ágnes, 방혁_이반차 Sick(1): Gerbovits Kevin Shift Change(1): Böröczki Balázs --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok May 11, 2025 at 6:11 AM, 원승연(Seungyeon Won) : Plz help AGV #6 May 11, 2025 at 6:11 AM, FA CS AGV Jawad : Sure sir May 11, 2025 at 6:11 AM, 원승연(Seungyeon Won) : @Nikolett SL/B EOL forklift Box packing May 11, 2025 at 6:22 AM, FA CS AGV Jawad : AGV back to auto and successfully unloaded trays. May 11, 2025 at 6:23 AM, 원승연(Seungyeon Won) : Thanks May 11, 2025 at 6:25 AM, 원승연(Seungyeon Won) : 박스포장기 2단 적재 무언정지 발생해서 설비 정지상태입니다. 프로그램 확인요청 드립니다 May 11, 2025 at 6:33 AM, KIM SEYEON [김세연]_FA : @Denkó Jani (F.A.) could you check box packer? May 11, 2025 at 6:37 AM, Denkó Jani (F.A.) : Going May 11, 2025 at 6:43 AM, 원승연(Seungyeon Won) : 감사합니다 May 11, 2025 at 6:50 AM, Denkó Jani (F.A.) : The error has been resolved. A pallet has been removed from the conveyor. R110642 May 11, 2025 at 6:51 AM, KIM SEYEON [김세연]_FA : 👍 May 11, 2025 at 7:38 AM, Nikolett SL/B EOL : Sziasztok GF 1 es Buffer hibára állt ki megtudnátok nézni kérlek Köszönöm May 11, 2025 at 7:39 AM, Boromisza Zoltán : Megyek May 11, 2025 at 7:51 AM, Boromisza Zoltán : Kész May 11, 2025 at 8:09 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check cell buffer M0STK011_C01 error. Thank you May 11, 2025 at 8:09 AM, Boromisza Zoltán : Okey May 11, 2025 at 9:07 AM, Denkó Jani (F.A.) : I would like to ask for help. The palette does not move on the M0STK012_P06 port Z302304 May 11, 2025 at 9:07 AM, Denkó Jani (F.A.) : @Shahbaz 샤바즈 MCS/RTD May 11, 2025 at 9:08 AM, Shahbaz 샤바즈 MCS/RTD : Checking May 11, 2025 at 9:09 AM, Denkó Jani (F.A.) : and the same error on the M0STK011_P11 port. T703606 May 11, 2025 at 9:09 AM, Denkó Jani (F.A.) : Thank you May 11, 2025 at 9:10 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the location of Z302304, it’s NA in MCS. May 11, 2025 at 9:10 AM, Denkó Jani (F.A.) : currently both palettes UNK May 11, 2025 at 9:11 AM, Shahbaz 샤바즈 MCS/RTD : Can you please tell me where these pallets physically located? May 11, 2025 at 9:12 AM, Denkó Jani (F.A.) : P11 and P06 May 11, 2025 at 9:15 AM, Shahbaz 샤바즈 MCS/RTD : There is a reply of HCACK:10 “Mismatch cassette size” from SCS for the transferZ May 11, 2025 at 9:18 AM, Denkó Jani (F.A.) : please modify the palette data so that it is good and the problem is solved. you have the authority to do so, so you can solve it. unfortunately we do not have the authority to do so...IF WE HAD, I WOULD HAVE RESOLVED THE ERROR ALREADY..🤝 May 11, 2025 at 9:21 AM, Denkó Jani (F.A.) : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA Maybe it would be appropriate to change our access now so that we don't always have to clown around here and beg everyone to fix the 3 minute errors.... PLEASE TAKE ACTION!!!! May 11, 2025 at 9:24 AM, Shahbaz 샤바즈 MCS/RTD : I understand the urgency, but I’m currently not sure about the correct cassette sizes. Without proper confirmation, we cannot safely modify the data on our side. May 11, 2025 at 9:27 AM, Denkó Jani (F.A.) : All paletta is short May 11, 2025 at 9:28 AM, Shahbaz 샤바즈 MCS/RTD : Okay then it is already short. May 11, 2025 at 9:35 AM, 원승연(Seungyeon Won) : This message was deleted. May 11, 2025 at 9:35 AM, 원승연(Seungyeon Won) : Oh I checked May 11, 2025 at 9:40 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check the pallet T704886 is not moving out from M0STK012 for EOL-5. Thank you May 11, 2025 at 9:43 AM, Denkó Jani (F.A.) : of course it doesn't move, since STK11 is also stuck due to the above-mentioned error... May 11, 2025 at 9:45 AM, 원승연(Seungyeon Won) : Is it possible to discharge the pallet at this location to the manual input station? May 11, 2025 at 9:46 AM, 원승연(Seungyeon Won) : M0STK012_P06 May 11, 2025 at 9:47 AM, Denkó Jani (F.A.) : Not at the moment, someone must have the right to do it, we don't ✌🏻 May 11, 2025 at 9:47 AM, Shahbaz 샤바즈 MCS/RTD : Yes, the pallet size of UNK in MCS is short as well but SCS is giving a cassette size error. May 11, 2025 at 10:09 AM, 원승연(Seungyeon Won) : I fixed it May 11, 2025 at 10:10 AM, 원승연(Seungyeon Won) : Weren’t you trained to specify the carrier size after refreshing May 11, 2025 at 10:10 AM, 원승연(Seungyeon Won) : ? May 11, 2025 at 10:10 AM, Denkó Jani (F.A.) : What is the question, sorry? May 11, 2025 at 10:12 AM, 원승연(Seungyeon Won) : Sorry After pressing the refresh button, the system is set to operate when the carrier size is specified as ‘Cell_Short’. UNK was not performing the task because it had lost the carrier size information. May 11, 2025 at 10:13 AM, Denkó Jani (F.A.) : Yes,I know May 11, 2025 at 10:14 AM, Denkó Jani (F.A.) : I wanted to overwrite the data, update it, but since I don't have permission to perform these operations, I couldn't solve it... I could solve it if all the conditions were met, but I don't... May 11, 2025 at 10:16 AM, 원승연(Seungyeon Won) : Oh I understand May 11, 2025 at 10:27 AM, 원승연(Seungyeon Won) : @Nikolett SL/B EOL Buffer warehouse#2 forklift need May 11, 2025 at 10:32 AM, Shahbaz 샤바즈 MCS/RTD : Is the pallet moved from M0STK011_P11? there is still a UNK carrier having a transfer command in MCS but the SCS reply is “Mismatch cassette size “ May 11, 2025 at 10:36 AM, 원승연(Seungyeon Won) : How do I resume a paused task? M0STK012 May 11, 2025 at 10:36 AM, Shahbaz 샤바즈 MCS/RTD : If the port is empty, please let us know so we can update and other transfer can be processed. Thank you May 11, 2025 at 10:41 AM, 원승연(Seungyeon Won) : I fixed May 11, 2025 at 10:42 AM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you very much. May 11, 2025 at 10:43 AM, 원승연(Seungyeon Won) : Now M0STK012 is working May 11, 2025 at 12:06 PM, Nikolett SL/B EOL : Sziasztok eol 9-10 előtt van egy AGV amit arrébb tudna valaki küldeni? Köszönöm May 11, 2025 at 12:07 PM, FA CS AGV Jawad : Yes May 11, 2025 at 12:11 PM, FA CS AGV Jawad : All done May 11, 2025 at 12:16 PM, 원승연(Seungyeon Won) : A BAND1 INPUT error is repeatedly occurring at the 2nd-level bending position. Sensor inspection is required. May 11, 2025 at 12:16 PM, 원승연(Seungyeon Won) : Box packing May 11, 2025 at 1:57 PM, 원승연(Seungyeon Won) : Plz check AGV #6 May 11, 2025 at 1:58 PM, FA CS AGV Jawad : On my way May 11, 2025 at 2:04 PM, FA CS AGV Jawad : All done May 11, 2025 at 7:01 PM, Tklcz Alexandra SL/A : Please move EOL AGV2 May 11, 2025 at 7:01 PM, FA-CS-AGV-Masoud : Sure May 11, 2025 at 8:51 PM, Magosi Erik : @FA-CS-AGV-Masoud please come to Line3 material lift. There are 2agv too close to eachother. Thank You May 11, 2025 at 8:52 PM, FA-CS-AGV-Masoud : Coming May 11, 2025 at 8:55 PM, FA-CS-AGV-Masoud : Solved May 11, 2025 at 8:55 PM, Magosi Erik : Thank You May 11, 2025 at 9:21 PM, Szentirmai Z. A/SSL : @FA-CS-AGV-Masoud Please send to other position the AGV#2 from EOL. Thank you May 11, 2025 at 9:22 PM, FA-CS-AGV-Masoud : Sure May 11, 2025 at 10:32 PM, Szentirmai Z. A/SSL : @FA-CS-AGV-Masoud The AGV#8 It picked up the empty palette from the M0STK013_P6 port, but it times out and can't be reset May 11, 2025 at 10:33 PM, FA-CS-AGV-Masoud : Im here thank you 🙏 May 11, 2025 at 10:43 PM, FA-CS-AGV-Masoud : The port has a problem, and @FA are currently working to resolve the issue. May 11, 2025 at 10:45 PM, Édl Tamás : Solved May 11, 2025 at 11:31 PM, Tklcz Alexandra SL/A : Boxpackingra kérünk technikust: Top cover align alarm. May 12, 2025 at 12:33 AM May 12, 2025 at 12:33 AM, 한상범(Han Sang Beom) : Empty Pallet is not being used in EOL 10Line. Please check it. @FA May 12, 2025 at 12:35 AM, VK (mcs) : Second cell buffer is out of service now. Technicians are working on it. Thx May 12, 2025 at 12:40 AM, 배병민 (Bae Byoungmin) : AGV#11 공팔레트 가지러 이동중입니다. 10라인에 투입예정입니딘 May 12, 2025 at 12:43 AM, 한상범(Han Sang Beom) : Pallet 투입 확인하였습니다. 감사합니다. May 12, 2025 at 12:44 AM, 배병민 (Bae Byoungmin) : 네 2번 창고 오류 조치로 투입이 조금 지연되었습니다. 현재는 조치 완료상태입니다 감사합니다. May 12, 2025 at 1:47 AM, Tklcz Alexandra SL/A : Please move EOL AGV 6 and 2 May 12, 2025 at 1:47 AM, FA-CS-AGV-Masoud : Sure May 12, 2025 at 1:56 AM, Tklcz Alexandra SL/A : Please move EOL AGV 4 May 12, 2025 at 1:57 AM, FA-CS-AGV-Masoud : Sure May 12, 2025 at 2:31 AM, Tklcz Alexandra SL/A : Please move EOL AGV5 May 12, 2025 at 2:32 AM, FA-CS-AGV-Masoud : Sure May 12, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Iváncsa "C" shift (06:00-18:00) 12 Tech, 0 SL Beteg(sick ): 1 Sarvajz Ferenc Szabadság(Holisay): 1, Farkas Tamás(SL) Helyettesít(Substitution): 2, Szücs Géza Imre(SL), Boromisza Zoltán Túlóra(Overtime): 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Csuti Zoli Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasz May 12, 2025 at 6:31 AM, Sási Zsolt SL/C/ EOL : Jó reggelt. Az EOL 3as sor mellett küldjétek el az AGVt. Paletta szállításban akadályoz May 12, 2025 at 6:32 AM, FA/CS/AGV/Taimur : Good morning, yes sure. May 12, 2025 at 7:54 AM, duzzaman Md (MCS) : @FA Please check M0CNV036_P13_BP01 Stop detect error. Thank you! May 12, 2025 at 7:55 AM, KIM SEYEON [김세연]_FA : @Döme György F.A please check it May 12, 2025 at 7:56 AM, duzzaman Md (MCS) : Also M0STK035_C01 MCP 1F HP1 LIGHT CURTAIN DETECT ERROR Thank you. May 12, 2025 at 7:56 AM, Döme György F.A : Checking May 12, 2025 at 8:05 AM, FACS_JaewonShin : ■ 12th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 12, 2025 at 8:05 AM, Döme György F.A : Done May 12, 2025 at 8:06 AM, Döme György F.A : Done May 12, 2025 at 8:07 AM, duzzaman Md (MCS) : Kindly also check M0STK021, Crane is OOS. Crane fork right collapse detect 1 error Appreciate your prompt support. Thank you May 12, 2025 at 8:08 AM, Döme György F.A : Checking May 12, 2025 at 8:24 AM, Döme György F.A : Done May 12, 2025 at 9:43 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek 9es AGV áll a 9es sorral szemben a buffernél May 12, 2025 at 9:44 AM, FA/CS/AGV/Taimur : Sure, coming May 12, 2025 at 9:53 AM, R. József C SL EOL : Eolon #4 agv riaszt Nézzétek meg kérlek May 12, 2025 at 9:54 AM, FA/CS/AGV/Taimur : This message was deleted. May 12, 2025 at 9:54 AM, FA/CS/AGV/Taimur : Checking May 12, 2025 at 9:55 AM, R. József C SL EOL : indicates its proximity May 12, 2025 at 1:58 PM, R. József C SL EOL : 2#es agv küldjétek el, útban van Eol 9-10 May 12, 2025 at 1:58 PM, FA/CS/AGV/Taimur : Sure May 12, 2025 at 2:16 PM, Szabolcs : @FA M0STK035_C01 crane problem. Check please. May 12, 2025 at 2:17 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra, szenzor probléma May 12, 2025 at 2:19 PM, Boromisza Zoltán : Going May 12, 2025 at 2:21 PM, Boromisza Zoltán : Solved May 12, 2025 at 2:21 PM, Boromisza Zoltán : Úton May 12, 2025 at 2:30 PM, FACS_Hyeongi Son : @SKOH2/제조-셀,모듈 출하/김병호 안녕하세요 주임님 오늘 출하일정은 몇시쯤 끝날예정인가요? 완제품 출하 끝나면 M0STK031 창고에 화재감지기 교체 예정입니다 May 12, 2025 at 2:31 PM, Halász György SL : Hi, Modul GF Line4 modul unloading/empty dunnage AGV delay. May 12, 2025 at 2:31 PM, Boromisza Zoltán : Kész May 12, 2025 at 2:31 PM, FA/CS/AGV/Taimur : Checking May 12, 2025 at 2:32 PM, Halász György SL : Thanks May 12, 2025 at 2:34 PM, Halász György SL : Solved May 12, 2025 at 2:35 PM, SKOH2/제조-셀,모듈 출하/김병호 : 모듈창고는 더니지 입고 후 명일 출하 모듈 배출 작업을 이어서 작업 예정이라 6시~7시는 넘어야 할거 같습니다. 얼마나 걸리실까요?? May 12, 2025 at 2:36 PM, FACS_Hyeongi Son : 작업시간 10분정도 예상합니다 May 12, 2025 at 2:43 PM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 지금 작업 부탁드립니다 매니저님 모듈 더니지 입고 차량이 조금 늦어서 20분후에 작업 시작하려합니다. May 12, 2025 at 2:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035_C01 기동정지중이라 제품 배출이 안되고 있습니다. 금일 이관 차량이 대기중이라 빠른 확인 부탁드립니다 May 12, 2025 at 3:01 PM, FACS_TaehyeongJin : @mcs STK35 Carrier id Z302412 Status is paused Can you make a transfer? May 12, 2025 at 3:02 PM, Sási Zsolt SL/C/ EOL : Menjetek légyszíves boxpackingra. Oldalsó burkolat lerakás Probléma May 12, 2025 at 3:02 PM, Zoltán Harasztia FA : Megyünk May 12, 2025 at 3:06 PM, Zoltán Harasztia FA : Kész May 12, 2025 at 3:11 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS_team @MCS/RTD team bank : M0STK035 carrier id : Z302202,Z302213,Z302235 배출명령 1시 44분에 생성했는데 아직도 배출되지 않아, 차량,인원 한시간 넘게 대기중입니다 빠른 확인 부탁드립니다 May 12, 2025 at 3:12 PM, FACS_TaehyeongJin : 현재 조치중입니다 May 12, 2025 at 3:12 PM, FACS_Hyeongi Son : 화재 감지기 교체완려하였습니다 May 12, 2025 at 3:16 PM, duzzaman Md (MCS) : Could you please give us the current location. As the current location is in NA state. Thanks ! May 12, 2025 at 3:17 PM, FACS_Youngmin LEE : @mcs STK35 Carrier id Z302412 0102201 plz put in information May 12, 2025 at 3:17 PM, 이재근(lee jae geun) : Please move the AGV#2 May 12, 2025 at 3:17 PM, FACS_TaehyeongJin : @mcs STK35 Location 0102201 Carrier id Z302412 Product Full Install plz May 12, 2025 at 3:19 PM, Duna Don : Done! May 12, 2025 at 3:19 PM, duzzaman Md (MCS) : Done. Thank you May 12, 2025 at 3:20 PM, FACS_TaehyeongJin : Check plz not done May 12, 2025 at 3:23 PM, duzzaman Md (MCS) : Done from MCS side and everything seems okay. Could give us a bit more info what it shows on your side May 12, 2025 at 3:24 PM, FACS_Hyeongi Son : 지금 Z0302202.Z302213 반송했습니다 May 12, 2025 at 3:34 PM, FACS_TaehyeongJin : There is no data on SCS May 12, 2025 at 3:39 PM, duzzaman Md (MCS) : MCS/RTD side is fine. Could you please manually input it in SCS side ? It should help. May 12, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 +2 Overtime Overtime (2):Csanálosi Gábor, Denkó János Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 12, 2025 at 9:29 PM, Szijjártó Balázs : Modul L3 elejére kérnék egy kis segítséget! May 12, 2025 at 9:30 PM, N.Gábor F.A. : Megyünk May 12, 2025 at 9:34 PM, Éváné Bori Viktória : Helló! Eol5-6 AGV 4 move please May 12, 2025 at 9:37 PM, FA CS AGV David 데이비드 : Done May 13, 2025 at 4:32 AM May 13, 2025 at 4:32 AM, 윤성제(Yoon SungJe) invited 승규 (BAEK SEUNGGYU). May 13, 2025 at 6:12 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.13 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 13, 2025 at 6:13 AM, Denkó Jani (F.A.) : Jó reggelt, sziasztok! A teherporta felőli parkolóban egy GLD-047-es rendszámú Suzuki Swift-en fent maradt a világítás. kérlek osszátok tovább más csoportba. May 13, 2025 at 6:13 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.13 FA Iváncsa "C" shift (06:00-18:00) 13 Tech, 1 SL Beteg(sick): 1, Sarvajz Ferenc Szabadság(Holisay): 2, Farkas Tamás(SL), Fabriczius Gergely Helyettesít(Substitution): 2, Böröcz Tamás, Pálosi Róbert, Szücs Géza Imre(SL) Túlóra(Overtime): 1, Édl Tamás --- Electrode (5) --- Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Pálosi Róbert --- Assembly 1F(3) --- Csuti Zoli Gégény Dávid Böröcz Tamás ---Assembly GF(3) --- Kertész Dániel Lajos Gábor Nagy Tamás --- May 13, 2025 at 8:04 AM, FACS_JaewonShin : ■ 13th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 13, 2025 at 8:42 AM, Duna Don invited FA/CS/AGV_ Asjad. May 13, 2025 at 9:43 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035_C01 기동정지중이라 제품 배출이 안되고 있습니다. 빠른 확인 부탁드립니다 May 13, 2025 at 9:44 AM, FACS_Hyeongi Son : 이동하겠습니다 May 13, 2025 at 9:47 AM, FACS_Hyeongi Son : M0STK035 정상가동중입니다 May 13, 2025 at 10:27 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035 1F M0CNv036_P13_BP01 기동 정지상태라 제품 배출이 안되고 있습니다. 빠른 확인 부탁드립니다 May 13, 2025 at 10:28 AM, FACS_Hyeongi Son : 이동하겠슺니다 May 13, 2025 at 10:33 AM, FACS_Hyeongi Son : 조치완료했습니다 May 13, 2025 at 10:40 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK023_P11 “Work data error” Thank you May 13, 2025 at 11:21 AM, R. József C SL EOL : Gyertek kérlek boxpackingra Megint csak 1 pántot rák rá May 13, 2025 at 2:07 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.05.13 2.Machine name : -셀버퍼#1.2.3.4 3. Action detail : -물건 감지 센서 조정 작업 4.Work time -Start : 14:05 -End : 5. Remark(special note) : -X May 13, 2025 at 4:03 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.05.13 2.Machine name : -셀버퍼#1.2.3.4 3. Action detail : -물건 감지 센서 조정 작업 4.Work time -Start : 14:05 -End : 15:59 5. Remark(special note) : -X May 13, 2025 at 4:18 PM, Sási Zsolt SL/C/ EOL : 3as sorral szemben az 1es AGV áll nézzétek meg kérlek May 13, 2025 at 4:20 PM, Duna Don : Checking May 13, 2025 at 4:25 PM, Duna Don : Solved May 13, 2025 at 4:53 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Nyomtatási probléma May 13, 2025 at 4:53 PM, Zoltán Harasztia FA : Megyünk May 13, 2025 at 5:10 PM, Sási Zsolt SL/C/ EOL : 3as Agvt nézzétek meg kérlek May 13, 2025 at 5:25 PM, Sási Zsolt SL/C/ EOL : Ugyanott megállt az 1es és 8as AGV is May 13, 2025 at 5:25 PM, Muneeb Ur Rehman : Checking May 13, 2025 at 5:28 PM, Muneeb Ur Rehman : Fixed May 13, 2025 at 6:00 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (0):- Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 13, 2025 at 9:40 PM, FA CS AGV David 데이비드 : @FA can someone please check the GF warehouse port M0CNV032_P01 May 14, 2025 at 12:22 AM May 14, 2025 at 12:22 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK012_P09 there is light curtain detect error . Thank you very much! May 14, 2025 at 12:26 AM, Dávid F.A. : Solved! May 14, 2025 at 12:26 AM, Mohammad Amir : Köszönom szepen! May 14, 2025 at 5:51 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.14 "B" műszak, 8+1/12+1 Tech, 1Sl Overtime(0): Holiday(3): Csanálosi Gábor, Takács Ádám, Kovács Ágnes Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Böröcz Tamás, Rácz Dániel --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- Support: 방혁_이반차 (Bang Hyuk) May 14, 2025 at 8:32 AM, FACS_JaewonShin : ■ 14th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 14, 2025 at 9:43 AM, duzzaman Md (MCS) : This message was deleted. May 14, 2025 at 9:43 AM, duzzaman Md (MCS) : @FA PLEASE CHECK M0STK035 FIRESERVER HEARR BEAT STOP THANK YOU ! May 14, 2025 at 9:45 AM, Rácz Dániel / FA : This message was deleted. May 14, 2025 at 9:45 AM, Rácz Dániel / FA : @Honeywell checking May 14, 2025 at 11:56 AM, duzzaman Md (MCS) : @FA Please check M0STK014_c02 there is Crane shelf in abort (double cargo). Thank you very much! May 14, 2025 at 12:52 PM, Boromisza Zoltán : Solved May 14, 2025 at 1:29 PM, Tóth Gyula : Sziasztok, Dunnagèt szeretnènk betölteni, de nem működik a raktár. MOCNV033_M02 May 14, 2025 at 4:26 PM, Nikolett SL/B EOL : Please check M0STK014_c02 Thank you May 14, 2025 at 4:27 PM, KIM SEYEON [김세연]_FA : @Boromisza Zoltán please check May 14, 2025 at 4:27 PM, Denkó Jani (F.A.) : Checking May 14, 2025 at 4:28 PM, FACS_Hyeongi Son : Solved May 14, 2025 at 9:26 PM, Tklcz Alexandra SL/A : Box packing Top cover align alarm [f04231] Kérünk technikust. May 14, 2025 at 9:35 PM, Csepi Árpád : @ solved May 14, 2025 at 9:51 PM, Tklcz Alexandra SL/A : AGV9 error near buffer. EOL 9L May 14, 2025 at 9:52 PM, FA CS AGV David 데이비드 : Coming May 14, 2025 at 9:54 PM, FA CS AGV David 데이비드 : Solved May 14, 2025 at 11:43 PM, Tklcz Alexandra SL/A : Technikusi segítséget kérünk a GF bufferhez. May 14, 2025 at 11:51 PM, Csepi Árpád : El készült! May 15, 2025 at 1:30 AM May 15, 2025 at 1:30 AM, Tklcz Alexandra SL/A : Modul boxpacking agv2 problem. Please check. May 15, 2025 at 1:35 AM, FA CS AGV David 데이비드 : Ok coming May 15, 2025 at 1:44 AM, Édl Tamás : Kész May 15, 2025 at 3:45 AM, Mohammad Amir : @FA @Édl Tamás Please check M0STK014_C02 there is Crane Rack Position not detect error. Thank you very much! May 15, 2025 at 4:40 AM, Édl Tamás : Sir! The crane cannot place load number R110741 at location 0100906 at this time. I would like a new placement location! Thank you! May 15, 2025 at 4:41 AM, Mohammad Amir : Checking May 15, 2025 at 4:44 AM, Mohammad Amir : Please confirm is carrier physically located at M0STK014_C02? Thank you! May 15, 2025 at 4:47 AM, Édl Tamás : Yes, ID R110741 is there. May 15, 2025 at 4:47 AM, Mohammad Amir : Thank you very much for the confirmation. May 15, 2025 at 4:51 AM, Mohammad Amir : Could you please fix the error in M0STK014_C02 . Error -Crane Rack position not detect error. Thank you very much! May 15, 2025 at 5:15 AM, Tklcz Alexandra SL/A : Please check EOL buffer 1. May 15, 2025 at 5:16 AM, FA CS AGV David 데이비드 : Checking May 15, 2025 at 5:21 AM, FA CS AGV David 데이비드 : It's all good May 15, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.15 "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(4): Csanálosi Gábor, Takács Ádám, Kovács Ágnes , 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(0): May 15, 2025 at 7:32 AM, 한상범(Han Sang Beom) : Empty pallets are not being fed into the EOL 6Line. Please check and confirm. @FA May 15, 2025 at 7:35 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please can you confirm the status of M0STK014_C02, there is a carrier for a long time which is causing delay. Thank you May 15, 2025 at 7:36 AM, Boromisza Zoltán : Okey May 15, 2025 at 7:51 AM, Boromisza Zoltán : MES problem May 15, 2025 at 7:56 AM, Shahbaz 샤바즈 MCS/RTD : There is already a transfer command from M0STK014 to EOL 6 line. The issue seems to be the pallet R110741 on M0STK014_C01. May 15, 2025 at 8:10 AM, FACS_JaewonShin : ■ 15th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 15, 2025 at 8:11 AM, Boromisza Zoltán : Solved May 15, 2025 at 8:32 AM, 한상범(Han Sang Beom) : Empty pallets have still not been fed in. Please check again. @FA May 15, 2025 at 8:33 AM, Shahbaz 샤바즈 MCS/RTD : @Boromisza Zoltán Is the pallet R110741 still on the crane? It’s still showing on crane in MCS. May 15, 2025 at 8:36 AM, FACS_Hyeongi Son : FA taking action May 15, 2025 at 8:36 AM, FACS_Hyeongi Son : Solved May 15, 2025 at 8:41 AM, 함희훈(HAM HEE HOON) : EOL 10-line AGV does not insert empty pallets. Please check so that we can insert them manually first. @FA May 15, 2025 at 8:43 AM, Shahbaz 샤바즈 MCS/RTD : Now pallet is on the way, maybe just few minutes May 15, 2025 at 8:44 AM, 함희훈(HAM HEE HOON) : Okay, I'll contact you if you don't come. Thank you. May 15, 2025 at 8:48 AM, Shahbaz 샤바즈 MCS/RTD : Sure, please write here. Earlier the delay occurred because of stocker problem. May 15, 2025 at 11:50 AM, Nikolett SL/B EOL : Sziasztok Eol 8-9 közt egy lekapcsolt AGV miatt nem tudd töltött menni a 16 os AGV így hibára áll ki Valaki tudna jönni? Köszönöm May 15, 2025 at 11:51 AM, Duna Don : Checking May 15, 2025 at 11:53 AM, Duna Don : Solved May 15, 2025 at 2:52 PM, Nikolett SL/B EOL : Sziasztok Boxpacking nem áll alaphelyzetbe valaki tudna menni ? Köszönöm May 15, 2025 at 2:52 PM, Boromisza Zoltán : Megyünk May 15, 2025 at 3:23 PM, Nikolett SL/B EOL : Same problem May 15, 2025 at 3:28 PM, FACS_Youngmin LEE : solved May 15, 2025 at 3:33 PM, Boromisza Zoltán : Kész May 15, 2025 at 3:50 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check M0STK014_C02 “Crane shelf in abort” Thank you May 15, 2025 at 3:57 PM, FACS_TaehyeongJin : Solved May 15, 2025 at 4:01 PM, FACS_Hyeongi Son : @SL There is a cargo that doesn't have a barcode on the part of the packing machine line Please check May 15, 2025 at 4:03 PM, FACS_Hyeongi Son : Don’t have carrier id sticker is not here May 15, 2025 at 4:11 PM, Nikolett SL/B EOL : Boxpacking Bcr data error hibára állt ki Valaki tudna menni Köszönöm May 15, 2025 at 4:17 PM, FACS_TaehyeongJin : 박스패킹에 있는 파레트에 캐리어 아이디 스티커가 없이 왔습니다 파레트 스티커를 가지고 와서 붙여야 진행 가능합니다 May 15, 2025 at 4:18 PM, FACS_Hyeongi Son : @Nikolett SL/B EOL May 15, 2025 at 4:18 PM, FACS_TaehyeongJin : S102423 파레트에 스티커 하나가 없습니다 May 15, 2025 at 4:27 PM, FACS_TaehyeongJin : Carrier id sticker is missing May 15, 2025 at 8:19 PM, Tklcz Alexandra SL/A : Modul boxpacking AGV11 error. May 15, 2025 at 8:19 PM, FA CS AGV Jawad : On my way... May 15, 2025 at 8:22 PM, FA CS AGV Jawad : Sorry have another error with 09, and 11 end product...once finished will be there May 15, 2025 at 8:30 PM, FA CS AGV Jawad : Solved May 15, 2025 at 8:31 PM, FA CS AGV Jawad : @Édl Tamás can you plz come to modul line 3, i need tool trolley May 16, 2025 at 12:02 AM May 16, 2025 at 12:02 AM, Tklcz Alexandra SL/A : AGV 14 EOL 5 error. May 16, 2025 at 12:04 AM, FA CS AGV Jawad : I check it May 16, 2025 at 12:04 AM, FA CS AGV Jawad : This message was deleted. May 16, 2025 at 12:07 AM, FA CS AGV Jawad : Done May 16, 2025 at 12:10 AM, FA CS AGV Jawad : @Édl Tamás can you plz help me at Stocker 11, Pallet position is not good on bridge May 16, 2025 at 12:49 AM, Tklcz Alexandra SL/A : GF Buffer 2.ben szól valamilyen riasztás. May 16, 2025 at 12:56 AM, Brázik János : Kész May 16, 2025 at 3:08 AM, Tklcz Alexandra SL/A : Technikusi segítséget kérünk a boxpackingre. May 16, 2025 at 4:25 AM, Édl Tamás : A boxpacking konkrét hibajel nélkül áll mozdulatlanul. Koreai segítők közbenjárását kérjük. May 16, 2025 at 5:21 AM, 최준영(JoonYoung Choi) : Box Packing 현상: 1. 03:00~ 박스 포장기 2단 적재 C/V에 1단 파레드 진입 후 에러 코드 없이 무언 정지 발생 2. 03:15~ 현지 테그니션 현장 도착 3. 센서 점검 및 초기화 진행 후 가동 하였지만 2Flow Detect Error발생 이후 추가 확인 뒤 재가동 하였지만 무언정지 현상 유지 중 현지 테크니션 원인 파악 불가로 확인 부탁 드리겠습니다. May 16, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.16 Time:06:00~18:00 1. BAEK HOJONG 백호종PM Köszönöm szépen May 16, 2025 at 6:17 AM, R. József C SL EOL : @Zoltán Harasztia FA @Döme György F.A Sziasztok Boxpacking megy, majd nézzétek neha arra May 16, 2025 at 6:32 AM, R. József C SL EOL : Boxpackingra gyertek kérlek Pantolóval van probléma May 16, 2025 at 6:32 AM, Zoltán Harasztia FA : Itt vagyunk May 16, 2025 at 7:55 AM, FA/CS/AGV/Taimur : @FA Can you please check F0BPM012-EQ-OP#2 Box packing. VacuumX alarm. Thank you May 16, 2025 at 8:00 AM, R. József C SL EOL : Boxpackingra kérnék segítséget, operátor jelezte, hogy vákuum probléma van May 16, 2025 at 8:19 AM, Boromisza Zoltán : Itt vagyunk May 16, 2025 at 8:35 AM, Boromisza Zoltán : Solved May 16, 2025 at 8:36 AM, Boromisza Zoltán : Kész May 16, 2025 at 8:36 AM, R. József C SL EOL : Köszönöm May 16, 2025 at 8:44 AM, Balázs Róbert SL : Sziasztok! Line1 TR#1-hez kérnék segítséget. Köszönöm May 16, 2025 at 8:46 AM, Döme György F.A : Jövök May 16, 2025 at 8:52 AM, FACS_JaewonShin : ■ 16th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 16, 2025 at 10:08 AM, Balázs Róbert SL : The AGV does not work at the end of line 1 May 16, 2025 at 10:13 AM, FA/CS/AGV/Taimur : This message was deleted. May 16, 2025 at 10:18 AM, FA/CS/AGV/Taimur : AGV in GF_End_Prduct for line 1 is back in operation auto mode. Thank you May 16, 2025 at 10:20 AM, R. József C SL EOL : Gyertek kérlek boxpackingra Agv nem jön a palettákért May 16, 2025 at 10:22 AM, R. József C SL EOL : Megoldva May 16, 2025 at 10:22 AM, R. József C SL EOL : Újra kellett indítani az utolsó touchpanelen a manual autó módot May 16, 2025 at 10:26 AM, Halász György SL : Hi, Modul GF line3 modul unloading agv error May 16, 2025 at 10:26 AM, Halász György SL : Thanks May 16, 2025 at 10:26 AM, FA/CS/AGV/Taimur : Checking May 16, 2025 at 10:36 AM, FA/CS/AGV/Taimur : Solved. May 16, 2025 at 10:40 AM, duzzaman Md (MCS) : @FA PLEASE CHECK M0STK021 & 023 Cranes are OOS for both. Thanks May 16, 2025 at 10:45 AM, Döme György F.A : Checking May 16, 2025 at 10:57 AM, Döme György F.A : Solved May 16, 2025 at 11:04 AM, R. József C SL EOL : Tudnátok jönni boxpackingra? Lehet a kioskot kellene újra indítani May 16, 2025 at 11:05 AM, R. József C SL EOL : Lehet kezd megint belassulni May 16, 2025 at 11:07 AM, Döme György F.A : Mindjárt megyek May 16, 2025 at 11:18 AM, Döme György F.A : Ki kellene szedni itt az NG-nél egy raklapot May 16, 2025 at 11:18 AM, R. József C SL EOL : Jó Mostmár elszivom a cigim May 16, 2025 at 11:32 AM, R. József C SL EOL : Megyek May 16, 2025 at 12:28 PM, R. József C SL EOL : Modul 2es sor előtt 10-es agv hibával áll Nézzétek meg kérlek May 16, 2025 at 12:34 PM, FA/CS/AGV_ Asjad : Checking May 16, 2025 at 12:34 PM, R. József C SL EOL : @Döme György F.A solved May 16, 2025 at 12:36 PM, Duna Don : Just a moment we are working on it, We need to adjust the wheel. Thanks May 16, 2025 at 12:40 PM, Duna Don : Now it’s solved, Thanks May 16, 2025 at 2:17 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Pántolóval van probléma May 16, 2025 at 2:17 PM, Döme György F.A : Itt vagyok May 16, 2025 at 2:18 PM, R. József C SL EOL : Köszönöm May 16, 2025 at 2:52 PM, Sási Zsolt SL/C/ EOL : 9es AGV error a 6os sor bemeneténél. Kérlek ellenőrizzétek May 16, 2025 at 2:57 PM, FA/CS/AGV/Taimur : Sorted already thank you May 16, 2025 at 3:18 PM, Sási Zsolt SL/C/ EOL : 8as AGV útban van. Kérlek küldjétek el May 16, 2025 at 3:22 PM, FA/CS/AGV/Taimur : Done May 16, 2025 at 5:58 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 16, 2025 at 6:06 PM, Czébely Dániel SL—D : @Dávid F.A. @N.Gábor F.A. Tudtok jönni a box packingra ? May 16, 2025 at 6:08 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 16 Time: 18:00~06:00 1. Jeong Woo-jun May 16, 2025 at 6:12 PM, N.Gábor F.A. : Mindjárt May 16, 2025 at 7:00 PM, Dávid F.A. : Solved! Ready to use! May 16, 2025 at 8:10 PM, Szijjártó Balázs : Szükség lenne egy kis segítségre a Line 3 LWR gantry-nél! May 16, 2025 at 8:12 PM, Éváné Bori Viktória : Sziasztok! A 2. Számú nyomtatónál a vákum nem megy le a holtpontig. Az alsó holtpont felett, kb 1,5-2 cm - mel megáll , így nem emeli fel a papírt. Segítséget kérünk!!! @N.Gábor F.A. @Dávid F.A. May 16, 2025 at 8:22 PM, N.Gábor F.A. : Megyek May 16, 2025 at 8:43 PM, Éváné Bori Viktória : Szia! Megint nem jó, megnéznétek még egyszer! May 16, 2025 at 9:03 PM, Dávid F.A. : Solved! May 17, 2025 at 1:08 AM May 17, 2025 at 1:08 AM, Mohammad Amir : @Dávid F.A. Please check M0STK012_C01 there is Crane_Plc_Interface_Error. Thank you very much! May 17, 2025 at 1:14 AM, Dávid F.A. : @Mohammad Amir Have a nice evening! Problem solved. Thank you for your help! May 17, 2025 at 1:15 AM, Mohammad Amir : Have a good evening as well. Thank you very much! May 17, 2025 at 4:12 AM, FA CS AGV Jawad : @Mohammad Amir can you plz send this pallet back to its source T705118,( Modul ) May 17, 2025 at 4:12 AM, Mohammad Amir : Checking May 17, 2025 at 4:13 AM, FA CS AGV Jawad : Loaded on AGV 8 May 17, 2025 at 4:15 AM, Mohammad Amir : Last job was cancelled by the Operator ✅. Now issue has been resolved and carrier is on its way to it's source Warehouse. ✅ I am monitoring the transfer to make sure smooth delivery. Thank you very much! May 17, 2025 at 4:22 AM, Mohammad Amir : The carrier has successfully stored in M0STK011(0201503) at 4:21. ✅ Feel free to contact me again if you need any further assistance. Thank you very much! May 17, 2025 at 5:25 AM, Éváné Bori Viktória : Helló! Eol AGV 16 in buffer. Error, please check! May 17, 2025 at 5:25 AM, FA CS AGV Jawad : I check it May 17, 2025 at 5:30 AM, FA CS AGV Jawad : Resolved May 17, 2025 at 6:36 AM, Sási Zsolt SL/C/ EOL : Jó reggelt 10es Cellpackingra nem hoz üres paletta. Kérem nézzétek meg May 17, 2025 at 6:45 AM, Zoltán Harasztia FA : Kész May 17, 2025 at 6:59 AM, Baek Hojong(백호종)FA : Day shift 05.17 06:00-18:00 Baek hojong Elec Cho Sung Jun Assem GF CHOI Myoungwoon Assem 1F Kim jeong hul May 17, 2025 at 9:01 AM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingra. Oldalsó burkolat hiba May 17, 2025 at 9:08 AM, Döme György F.A : Kész May 17, 2025 at 9:30 AM, 한상범(Han Sang Beom) : Please check AGV#14 @FA May 17, 2025 at 9:32 AM, FA/CS/AGV/Taimur : Checking May 17, 2025 at 9:36 AM, FA/CS/AGV/Taimur : Solved May 17, 2025 at 10:07 AM, Sási Zsolt SL/C/ EOL : Nézzétek meg kérlek a boxpackinget. Pantolassal van probléma May 17, 2025 at 1:48 PM, Herceg Sándor SSL/C : Sziasztok! Boxpacking 1-es pántoló miatt azóta is áll. Tudtok róla valamit? May 17, 2025 at 1:49 PM, Zoltán Harasztia FA : Várjuk , hogy hátha lapunk plc- segítséget May 17, 2025 at 1:49 PM, Zoltán Harasztia FA : *kapunk May 17, 2025 at 2:23 PM, Sási Zsolt SL/C/ EOL : 16os AGV áll kérem nézzétek meg May 17, 2025 at 2:25 PM, FA/CS/AGV/Taimur : Checking May 17, 2025 at 2:31 PM, FA/CS/AGV/Taimur : Sloved, Thankyou May 17, 2025 at 2:32 PM, Herceg Sándor SSL/C : Azóta sem? May 17, 2025 at 2:32 PM, Zoltán Harasztia FA : Eddig semmi May 17, 2025 at 2:36 PM, Zoltán Harasztia FA : Jön segítség , csak még úton vannak May 17, 2025 at 2:39 PM, 유경호(RYU KYEONGHO) : @Baek Hojong(백호종)FA 안녕하세요. 피앰님 박스패킹에 1차 벤딩기 쪽에 문제가 있는듯 합니다. 확인 가능하신지 문의드립니다. May 17, 2025 at 2:40 PM, Baek Hojong(백호종)FA : @KIM SEYEON [김세연]_FA 피엠님 도움 요청 부탁드립니다 코터에 지금 처리할것이 있어서 May 17, 2025 at 2:41 PM, KIM SEYEON [김세연]_FA : 피엠님 제가 cs팀 연락중입니다. 해결하도록 하겠습니다. May 17, 2025 at 2:42 PM, 유경호(RYU KYEONGHO) : 감사합니다 May 17, 2025 at 3:05 PM, KIM SEYEON [김세연]_FA : @Döme György F.A please come to box packing mc 1st banding May 17, 2025 at 3:06 PM, Döme György F.A : On my way May 17, 2025 at 4:42 PM, KIM SEYEON [김세연]_FA : 조치 되었습니다. May 17, 2025 at 5:13 PM, 유경호(RYU KYEONGHO) : @Herceg Sándor SSL/C @Sási Zsolt SL/C/ EOL May 17, 2025 at 5:13 PM, 유경호(RYU KYEONGHO) : 감사합니다 May 17, 2025 at 5:18 PM, Herceg Sándor SSL/C : Yes, for now it's working and we are producing. May 17, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs, Novák Károly Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 17, 2025 at 6:05 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 17, 2025 at 6:45 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget! Pántoló probléma. @N.Gábor F.A. @Dávid F.A. May 17, 2025 at 6:48 PM, N.Gábor F.A. : Itt vagyunk May 17, 2025 at 6:48 PM, N.Gábor F.A. : :) May 17, 2025 at 6:48 PM, Éváné Bori Viktória : 🙂 May 17, 2025 at 7:42 PM, Czébely Dániel SL—D : AGV 12 Error Plz check May 17, 2025 at 7:42 PM, FA CS AGV Jawad : I check it May 17, 2025 at 7:46 PM, FA CS AGV Jawad : Solved May 17, 2025 at 8:54 PM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok box packing problem sorvo. Technologia. 🤌 May 17, 2025 at 9:06 PM, Dávid F.A. : Solved! May 17, 2025 at 9:17 PM, Éváné Bori Viktória : Helló Eol AGV 14 move please May 17, 2025 at 9:17 PM, FA CS AGV Jawad : I do May 17, 2025 at 9:18 PM, FA CS AGV Jawad : Done May 17, 2025 at 9:44 PM, 원승연(Seungyeon Won) : FORMATION AGV CHECK PLZ STOP STATE May 17, 2025 at 9:45 PM, FA CS AGV Jawad : I checm it May 17, 2025 at 9:59 PM, FA CS AGV Jawad : Solved May 17, 2025 at 10:08 PM, 원승연(Seungyeon Won) : It had been stopped for 50 minutes. May 17, 2025 at 10:08 PM, 원승연(Seungyeon Won) : I’ll handle it. May 17, 2025 at 10:09 PM, FA CS AGV Jawad : I hve fixed it...& sorry i am having dinner break, May 17, 2025 at 10:09 PM, 원승연(Seungyeon Won) : AGV 16 check plz Because of this AGV, none of the other AGVs can move. May 17, 2025 at 10:10 PM, FA CS AGV Jawad : I come to check May 17, 2025 at 10:15 PM, FA CS AGV Jawad : I dont see any error in AGV 16 EOL. May 17, 2025 at 10:16 PM, 원승연(Seungyeon Won) : There’s no error, but it’s stopped at the out-port. The AGV is only showing as “in progress.” Manually moving it to another node should resolve the issue. May 17, 2025 at 10:18 PM, FA CS AGV Jawad : AGV doesnt show job !!! May 17, 2025 at 10:18 PM, FA CS AGV Jawad : Its idle status May 17, 2025 at 10:18 PM, 원승연(Seungyeon Won) : I will check May 17, 2025 at 10:19 PM, FA CS AGV Jawad : Pallet ID T703130 May 17, 2025 at 10:27 PM, FA CS AGV Jawad : @Shakir (MCS) can you plz check its status , pallet id is mentioned May 17, 2025 at 10:28 PM, 원승연(Seungyeon Won) : 해당 AGV 3라인 포트로 파레트 전송작업안하는 이유를 알 수 있을까요? Can you tell me why that AGV is not transferring pallets to the 3Line port? May 17, 2025 at 10:30 PM, FA CS AGV Jawad : As I can see nodes are blocked May 17, 2025 at 10:31 PM, FA CS AGV Jawad : Probably thats the reason May 17, 2025 at 10:32 PM, 방혁 PM(Bang.Hyuk) FA : Do you have permission for ACS? May 17, 2025 at 10:32 PM, FA CS AGV Jawad : Unfortunately no May 17, 2025 at 10:32 PM, Shakir (MCS) : Transport job request at 21:18, AGV 16 assigned at 21:19, after carrier installed agv not moved. From MCS side all good ✅. There is issue of AGV or nodes. Thank you May 17, 2025 at 10:38 PM, Shakir (MCS) : Correct the nodes are blocked for AGV destination F3CPM10_P01. Also the port is in manual mode. Thank you May 17, 2025 at 10:39 PM, 방혁 PM(Bang.Hyuk) FA : It will be solve May 17, 2025 at 10:44 PM, 원승연(Seungyeon Won) : 노드 활성화 기능이 없었는데 활성화 후 정상 작동합니다. May 17, 2025 at 10:44 PM, FA CS AGV Jawad : Issue resolved. Thank you for your patience May 17, 2025 at 10:44 PM, 방혁 PM(Bang.Hyuk) FA : Opened the link for following nodes 1620, 1619,1669, 1031. Line 3 EOL May 17, 2025 at 10:44 PM, 방혁 PM(Bang.Hyuk) FA : 해결했습니다 May 17, 2025 at 11:44 PM, Éváné Bori Viktória : Sziasztok! Box packing oldalfal probléma, segítséget kérünk. @N.Gábor F.A. @Dávid F.A. May 18, 2025 at 12:04 AM May 18, 2025 at 12:04 AM, Dávid F.A. : Solved! May 18, 2025 at 12:17 AM, Éváné Bori Viktória : Helló Eol AGV problem. 5L not coming the palettes!. Please check! May 18, 2025 at 12:19 AM, FA CS AGV Jawad : @Shakir (MCS) can you plz check... May 18, 2025 at 12:29 AM, Shakir (MCS) : @FA Please check the carrier T703231 located at M0STK014_P06 is not moving. Everything is okay from MCS side. Thank you May 18, 2025 at 12:37 AM, Shakir (MCS) : Also please check carrier S102823 at stk M0STK014 Everything is okay from MCS side. it’s being put into queued.STK reply is success. Thank you May 18, 2025 at 1:04 AM, Őri Imre : Modul 3 soron cella ellátási gondok vannak! Nem hozott az AGV anyagot! Nézzétek rá légyszíves! Köszönöm! May 18, 2025 at 1:07 AM, Shakir (MCS) : Please press LR Last LR received at 22:44 job completed at 22:53. Thank you May 18, 2025 at 1:07 AM, Shakir (MCS) : LR received successfully May 18, 2025 at 1:08 AM, Shakir (MCS) : Job has been initiated for line 3. May 18, 2025 at 1:13 AM, N.Gábor F.A. : Dolgozunk az ügyön May 18, 2025 at 1:13 AM, Shakir (MCS) : AGV16 has been assigned for line3 EOL On the way ✅ Thank you May 18, 2025 at 1:16 AM, Dávid F.A. : We are ready! The warehouse is ready for operation! Please be patient, the supply will start! May 18, 2025 at 1:43 AM, FA CS AGV Jawad : @Éváné Bori Viktória can you come to EOL 5 ? May 18, 2025 at 1:48 AM, Éváné Bori Viktória : I m here May 18, 2025 at 1:58 AM, FA CS AGV Jawad : Yes I saw you coming....Thanks. There was pallet problem...i just wanted you to comfirm its positon, because it was stuck there May 18, 2025 at 4:12 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. May 18, 2025 at 4:12 AM, Czébely Dániel SL—D : Ujra May 18, 2025 at 4:14 AM, Dávid F.A. : Let's go again May 18, 2025 at 5:07 AM, Dávid F.A. : Solved! May 18, 2025 at 6:23 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.18 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assey GF OH Eunhyang 1F Kim Jongwon May 18, 2025 at 7:32 AM, Sási Zsolt SL/C/ EOL : Sziasztok. Most értesítettek, a boxpackingen van valami probléma. Kérlek nézzétek meg May 18, 2025 at 7:37 AM, Zoltán Harasztia FA : Kész May 18, 2025 at 7:47 AM, Halász György SL : Good morning, Modul GF line3 modul unloading AGV delay. May 18, 2025 at 7:47 AM, Halász György SL : Thanks May 18, 2025 at 7:49 AM, Halász György SL : Line 4 same problem May 18, 2025 at 7:52 AM, Döme György F.A : Kész.Elakadás volt a raktárban. May 18, 2025 at 8:30 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek 1F cell bufferhez. 2 paletta összecsúszott a CVn May 18, 2025 at 8:30 AM, Zoltán Harasztia FA : Repülünk May 18, 2025 at 8:33 AM, KIM SEYEON [김세연]_FA : @FA CS AGV David 데이비드 @FA CS AGV Jawad please check May 18, 2025 at 8:34 AM, FA/CS/AGV/Taimur : Checking. May 18, 2025 at 8:40 AM, Zoltán Harasztia FA : Kész May 18, 2025 at 10:02 AM, Sási Zsolt SL/C/ EOL : 1F cell buffert nézzétek meg légyszíves May 18, 2025 at 10:03 AM, Döme György F.A : Itt vagyunk May 18, 2025 at 10:10 AM, Döme György F.A : Kész May 18, 2025 at 12:27 PM, Sási Zsolt SL/C/ EOL : Nézzétek rá légyszíves a boxpackingra. Van egy hiba May 18, 2025 at 12:27 PM, Zoltán Harasztia FA : Megyünk May 18, 2025 at 1:41 PM, Sási Zsolt SL/C/ EOL : Nézzétek rá légyszíves a boxpackingra. Van egy hiba May 18, 2025 at 1:50 PM, Zoltán Harasztia FA : Kész May 18, 2025 at 1:51 PM, Sási Zsolt SL/C/ EOL : Köszi May 18, 2025 at 2:30 PM, 조보행(CHO BO HAENG) invited 유용호. May 18, 2025 at 2:30 PM, 조보행(CHO BO HAENG) invited 채효석(Hyoseok CHAE). May 18, 2025 at 2:38 PM, Sási Zsolt SL/C/ EOL : Nézzétek rá légyszíves a boxpackingra. Van egy hiba May 18, 2025 at 2:39 PM, Zoltán Harasztia FA : Megyünk May 18, 2025 at 2:40 PM, Sási Zsolt SL/C/ EOL : Köszi May 18, 2025 at 3:05 PM, Zoltán Harasztia FA : Kész May 18, 2025 at 3:29 PM, Sási Zsolt SL/C/ EOL : 13as AGVt kérlek küldjétek el, szállításban akadályoz May 18, 2025 at 3:30 PM, FA/CS/AGV/Taimur : Moved. May 18, 2025 at 3:42 PM, Sási Zsolt SL/C/ EOL : Nézzétek rá légyszíves a boxpackingra. Van egy hiba May 18, 2025 at 3:42 PM, Döme György F.A : Megyünk May 18, 2025 at 4:06 PM, Döme György F.A : Kész May 18, 2025 at 5:08 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek Boxpackingre. Oldalsó burkolatot rosszul rakja rá a palettára May 18, 2025 at 5:09 PM, Döme György F.A : Megyünk May 18, 2025 at 5:32 PM, Döme György F.A : Kész May 18, 2025 at 5:35 PM, Sási Zsolt SL/C/ EOL : Köszi May 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13+1 Overtime Overtime (1): Denkó János Sick (2):Kiss Balázs, Magyar Balázs Holiday (0):- Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Novák Károly Modul(3): Martina Dávid, Nagy Gábor, Denkó János May 18, 2025 at 6:03 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 18, 2025 at 6:39 PM, Éváné Bori Viktória : Sziasztok! Box packing servo hiba, kérlek gyertek segíteni. @N.Gábor F.A. @Dávid F.A. May 18, 2025 at 6:47 PM, N.Gábor F.A. : Megyünk May 18, 2025 at 6:54 PM, FA CS AGV Jawad : @N.Gábor F.A. can you plz help me at STK 12, stoppers are down but pallet is not coming May 18, 2025 at 7:01 PM, Denkó Jani (F.A.) : Solved May 18, 2025 at 7:04 PM, FA CS AGV Jawad : Thanks May 18, 2025 at 7:21 PM, Szijjártó Balázs : Modul L3 kitöltésen megint megakadt félúton a dunnage... May 18, 2025 at 7:35 PM, Éváné Bori Viktória : Helló! Eol3 AGV 17 move please May 18, 2025 at 7:37 PM, Nagy Mónika : Segítséget kèrnènk modul line4 1 block AGV probléma. Köszönöm!🙂 May 18, 2025 at 7:52 PM, Denkó Jani (F.A.) : Solved May 18, 2025 at 7:52 PM, FA CS AGV Jawad : Coming...i was occupied in Modul May 18, 2025 at 7:56 PM, N.Gábor F.A. : Kész van Lehet használni May 18, 2025 at 7:58 PM, Éváné Bori Viktória : Köszi May 18, 2025 at 8:29 PM, Szijjártó Balázs : Modul L4 UPR gantryhez kérnék segítséget.Bufferport#1 bajunk van. May 19, 2025 at 3:22 AM May 19, 2025 at 3:22 AM, 이재근(lee jae geun) : plz check AGV 14 May 19, 2025 at 3:23 AM, FA CS AGV Jawad : I do May 19, 2025 at 5:15 AM, Őri Imre : AGV 14 a 3 sor végén a kiadagolásnál elakadt! Meg tudnátok nézni? May 19, 2025 at 5:15 AM, Őri Imre : Köszi May 19, 2025 at 5:15 AM, FA CS AGV Jawad : Yes May 19, 2025 at 5:17 AM, FA CS AGV Jawad : Solved May 19, 2025 at 5:18 AM, Őri Imre : Thx. May 19, 2025 at 8:04 AM, FACS_JaewonShin : ■ 19th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 19, 2025 at 8:48 AM, Tklcz Alexandra SL/A : Hi! AGV14 error. 5-6 EOL buffer. May 19, 2025 at 8:49 AM, FA-CS-AGV-Masoud : Coming May 19, 2025 at 8:51 AM, FA-CS-AGV-Masoud : Solved May 19, 2025 at 9:02 AM, Szabolcs : @FA M0STK035_P13 (58010) problem. Check please. May 19, 2025 at 9:10 AM, 준용 : @배병민 (Bae Byoungmin) pm 님 화성 박스포장기에서 알람을 한꺼번에 100개넘게 올려서 통품감 시스템에 감지가 되고있는데 확인좀 부탁드립니다. 정상적인상황인지 May 19, 2025 at 9:11 AM, 준용 : 참고로 해체기도 마찬가지입니다. May 19, 2025 at 9:12 AM, KIM SEYEON [김세연]_FA : 혹시 어느부서이신가요? May 19, 2025 at 9:12 AM, 준용 : 유럽 roc 화성 담당 Sk cnc 이준용 매니저입니다 May 19, 2025 at 9:13 AM, KIM SEYEON [김세연]_FA : @FACS_JaewonShin @진재정 박스포장기 해체기 알람이 어떤것인지 확인 부탁드립니다. May 19, 2025 at 9:16 AM, 진재정 : 전장문제입니다. MC 고장으로 인해 알람다발 했습니다. May 19, 2025 at 9:17 AM, KIM SEYEON [김세연]_FA : 조치가 완료되었나요? May 19, 2025 at 9:18 AM, 진재정 : 설비 off후 mc교체 필요합니다. May 19, 2025 at 9:20 AM, 진재정 : 해당 설비는 해체기만 발생했고 포장기는 문제없이 가동중입니다 May 19, 2025 at 9:21 AM, FACS_JaewonShin : Mc 스페어 지급해주시면 교체작업 가능합니다. 일요일날 ng포트 상승 실린더 솔파손으로 해체기에서 떼갔는데 해당 부품도 필요합니다. May 19, 2025 at 9:27 AM, Tklcz Alexandra SL/A : EOL 3 AGV16 error. May 19, 2025 at 9:27 AM, FA-CS-AGV-Masoud : Coming May 19, 2025 at 9:30 AM, FA-CS-AGV-Masoud : Solved May 19, 2025 at 9:59 AM, 최준영(JoonYoung Choi) : EOL AGV#17 Please move to another place May 19, 2025 at 10:01 AM, 요셉 : Eol 5L Please check if empty pallets are not coming in May 19, 2025 at 10:04 AM, Mohammad Amir : @Csepi Árpád Please check T704626 located currently M0STK013_0102804 ,it is not moving and that's why empty pallet delivery is disrupted. Everything is good from MCS RTD side. ✅ Please check physically. Thank you very much! May 19, 2025 at 10:08 AM, FA-CS-AGV-Masoud : @Csepi Árpád please check port M0STK012_P09 May 19, 2025 at 10:10 AM, Mohammad Amir : Issue has been resolved now ✅. Now empty pallet on the way to EOL-5L. I am monitoring. Thank you very much! May 19, 2025 at 10:16 AM, FA-CS-AGV-Masoud : Solved May 19, 2025 at 11:09 AM, 최준영(JoonYoung Choi) : EOL AGV#13 Please move to another place May 19, 2025 at 11:10 AM, FA-CS-AGV-Masoud : Sure May 19, 2025 at 1:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK035_C01 크레인 기동 정지 상태입니다. 알람은 발생하지 않았는게 움직이지 않고 있습니다. 빠른 확인 부탁드립니다. 금일 출하가 마니 밀렸습니다 May 19, 2025 at 1:58 PM, FACS_Youngmin LEE : 조치되었습니다. May 19, 2025 at 3:08 PM, FACS_Youngmin LEE : Az 1F cella pufferhez targonca támogatás szükséges. Van valaki, aki tudna nekem segíteni? May 19, 2025 at 3:12 PM, Édl Tamás : Ok May 19, 2025 at 4:41 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK035_C01 크레인 알람 발생하여 기동 정지 상태입니다. 빠른 확인 부탁드립니다. May 19, 2025 at 4:41 PM, FACS_Hyeongi Son : 이동중입니다 May 19, 2025 at 4:43 PM, FACS_Hyeongi Son : 조치완료하였습니다 May 19, 2025 at 5:05 PM, Tklcz Alexandra SL/A : AGV 15 error EOL 3 buffer. May 19, 2025 at 5:05 PM, FA-CS-AGV-Masoud : Coming May 19, 2025 at 5:08 PM, Duna Don : Solved May 19, 2025 at 5:55 PM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.19 "B" műszak, 11+1/12+1 Tech, 1Sl Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Sup May 19, 2025 at 7:20 PM, Nikolett SL/B EOL : Sziasztok Boxpackingnál nem tudja berakni a Palettát valaki tudna menni ? Köszönöm May 19, 2025 at 7:20 PM, Boromisza Zoltán : Megyek May 19, 2025 at 7:20 PM, Muneeb Ur Rehman : The stocker is at alarm. It will take pallets out once it is resolved. May 19, 2025 at 7:40 PM, 한상범(Han Sang Beom) : Empty Pallet is not being deployed on EOL 5Line. Please confirm. @FA May 19, 2025 at 7:42 PM, Boromisza Zoltán : Kész May 19, 2025 at 8:08 PM, Nikolett SL/B EOL : Eol területén a 8 as számú AGV hibára állt ki Valaki tudna jönni Köszönöm May 19, 2025 at 8:08 PM, Muneeb Ur Rehman : Checking May 19, 2025 at 8:11 PM, Muneeb Ur Rehman : Fixed May 19, 2025 at 9:41 PM, Nikolett SL/B EOL : Boxpacking vakum probléma van valaki tudna menni ? Köszönöm May 19, 2025 at 10:02 PM, Denkó Jani (F.A.) : Kész May 20, 2025 at 3:57 AM May 20, 2025 at 3:57 AM, Vadász Dóra SSL/B : Sziasztok Box packingon vákuumhiba a top cover felhelyezésnél. Kérlek nézzétek meg. Köszönöm May 20, 2025 at 3:58 AM, Denkó Jani (F.A.) : Hamarosan érkezünk May 20, 2025 at 4:23 AM, Denkó Jani (F.A.) : Kész, lehet nyomtatni ✌🏻 May 20, 2025 at 7:40 AM, Tklcz Alexandra SL/A : EOL4 AGV12 error May 20, 2025 at 7:40 AM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 7:44 AM, FA-CS-AGV-Masoud : It’s not AGV problem port is full and AGV is waiting for unloading the pallet May 20, 2025 at 8:08 AM, FACS_JaewonShin : ■ 20th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 20, 2025 at 9:28 AM, FACS_Hyeongi Son : @mcs Hello M0STK014 0102101->M01_OP01(16011) Can you move it like this? May 20, 2025 at 9:29 AM, Sazzad Bhai SKon : This is op port, we can try only lp ports May 20, 2025 at 10:27 AM, FACS_Hyeongi Son : @mcs Szia There is a cargo in M0STK026 But there is no catch in SCS Can you make a job? May 20, 2025 at 10:29 AM, Sazzad Bhai SKon : Please write shelf/unit/carrier id May 20, 2025 at 10:32 AM, FACS_Hyeongi Son : Carrier id : PS230-2505160073 M0STK026_C01 -> 0201303 May 20, 2025 at 10:32 AM, Mohammad Amir : Checking May 20, 2025 at 10:36 AM, Mohammad Amir : Job has been created successfully ✅. Thank you very much! May 20, 2025 at 10:36 AM, FACS_Hyeongi Son : Thank you!👍🏻 May 20, 2025 at 10:37 AM, Mohammad Amir : You are welcome,Sir. May 20, 2025 at 10:37 AM, Tklcz Alexandra SL/A : EOL9 buffer AGV14 error. May 20, 2025 at 10:38 AM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 10:39 AM, FA-CS-AGV-Masoud : Solved May 20, 2025 at 11:51 AM, Szabolcs : @FA M0CNV036_P13_BP01 problem. Check please. May 20, 2025 at 11:59 AM, FACS_Hyeongi Son : Solved May 20, 2025 at 12:06 PM, Tklcz Alexandra SL/A : EOL9 AGV8 error. And AGV 15 buffer here. May 20, 2025 at 12:07 PM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 12:12 PM, FA-CS-AGV-Masoud : Solved May 20, 2025 at 2:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK035_C01 크레인 알람 발생하여 기동 정지 상태입니다. 빠른 확인 부탁드립니다. May 20, 2025 at 2:37 PM, SKOH2/제조-셀,모듈 출하/김병호 : 금일 출하가 밀려서 빠른 확인 부탁드립니다 May 20, 2025 at 2:37 PM, FACS_Hyeongi Son : 이동하겠습니다 May 20, 2025 at 2:39 PM, FACS_Hyeongi Son : 정상가동중입니다 May 20, 2025 at 2:39 PM, Csepi Árpád : 크레인이 다시 자동 모드로 작동합니다! May 20, 2025 at 2:43 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 May 20, 2025 at 3:04 PM, Tklcz Alexandra SL/A : EOL9 buffer AGV10 error. May 20, 2025 at 3:04 PM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 3:09 PM, FA-CS-AGV-Masoud : Solved May 20, 2025 at 3:16 PM, FACS_Hyeongi Son : @MCS Hello M0STK032_0201505 ->M0CMV033_M03 Can you create a job like this? Carrier id : UNK-25051708380879 May 20, 2025 at 3:17 PM, Mohammad Amir : Checking Sir. May 20, 2025 at 3:20 PM, Mohammad Amir : Yes Sir, There are several path available to execute this command. Most efficient route:- M0STK032->M0CNV033_M03. Please let me know should I create command? Thank you very much! May 20, 2025 at 3:21 PM, FACS_Hyeongi Son : Yes create command Thank you very much!👍🏻 May 20, 2025 at 3:23 PM, Mohammad Amir : Sure Sir, Command has been created successfully ✅. I am monitoring for smooth delivery of the material. Feel free to contact me again if you need any further assistance. Thank you very much! May 20, 2025 at 3:31 PM, Mohammad Amir : Sir, Update:- Carrier has successfully arrived at M03 at 15:28. ✅ Please collect it. Thank you very much! May 20, 2025 at 3:31 PM, FACS_Hyeongi Son : Thank you very much!👍🏻 May 20, 2025 at 3:32 PM, Mohammad Amir : You are welcome! May 20, 2025 at 4:35 PM, Tklcz Alexandra SL/A : Boxpacking AGV12 error. May 20, 2025 at 4:38 PM, FA-CS-AGV-Masoud : Coming May 20, 2025 at 4:41 PM, FA-CS-AGV-Masoud : The port is full AGV cannot deliver pallets right now. Thanks May 20, 2025 at 5:41 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK035_C01 라이트커튼 센서 알람으로 기동 정지 상태입니다. 확인 부탁드립니다 May 20, 2025 at 5:42 PM, FACS_Hyeongi Son : 이동증입니다 May 20, 2025 at 5:42 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다. May 20, 2025 at 5:46 PM, Csepi Árpád : 현장에 와 있는데 크레인이 다시 작업 중입니다! May 20, 2025 at 5:46 PM, FACS_Hyeongi Son : @MCS Hello M0STK035_C01->0202505 Is it possible to create a job like this? Carrier id : Z302978 May 20, 2025 at 5:50 PM, VK (mcs) : Is that carrier on the crane? Location in MCS in NA If I create a job it will make an error with return code HCACK 3. It’s better create job in SCS. Thx May 20, 2025 at 5:50 PM, FACS_Hyeongi Son : It's in the crain right now May 20, 2025 at 5:56 PM, VK (mcs) : Can you creat a manual job? I tried but it failed. May 20, 2025 at 5:57 PM, FACS_Hyeongi Son : Okiii thamk you May 20, 2025 at 5:57 PM, FACS_Hyeongi Son : *thank May 20, 2025 at 6:01 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.20. "B" műszak, 12+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(0): Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(5): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromi May 20, 2025 at 6:03 PM, FACS_Hyeongi Son : 정상가동중입니다 May 20, 2025 at 6:08 PM, Nikolett SL/B EOL : Sziasztok Boxpacking probléma van Nem lehet alaphelyzetbe rakni Valaki tudna jönni köszönöm May 20, 2025 at 6:09 PM, Denkó Jani (F.A.) : Hamarosan érkezünk May 20, 2025 at 6:36 PM, Boromisza Zoltán : Kész May 20, 2025 at 8:08 PM, Nikolett SL/B EOL : Sziasztok Boxpacking előtt lévő AGV valaki eltudja küldeni ? Köszönöm May 20, 2025 at 8:09 PM, Muneeb Ur Rehman : Checking May 20, 2025 at 10:04 PM, Nikolett SL/B EOL : Sziasztok 4 es Buffer megállt valaki tudna menni ? Köszönöm May 20, 2025 at 10:05 PM, Denkó Jani (F.A.) : Mindjárt ott vagyunk May 20, 2025 at 10:09 PM, Boromisza Zoltán : Kész May 21, 2025 at 3:49 AM May 21, 2025 at 3:49 AM, Nikolett SL/B EOL : Eol 5 AGV hibára állt ki valaki tudna jönni ? Köszönöm May 21, 2025 at 3:49 AM, Muneeb Ur Rehman : Checking May 21, 2025 at 3:52 AM, Muneeb Ur Rehman : Fixed May 21, 2025 at 6:13 AM, Balázs Róbert SL : Hi! Line 4 Final,AGV stop. May 21, 2025 at 6:13 AM, FA-CS-AGV-Masoud : Coming May 21, 2025 at 6:15 AM, R. József C SL EOL : Kérlek nézzétek meg a boxpackingot, probléma van May 21, 2025 at 6:16 AM, Zoltán Harasztia FA : Megyünk May 21, 2025 at 6:16 AM, Mohammad Amir : @Zoltán Harasztia FA Please check M0STK014 it shows Firesensor abnormal state alarm. Thank you very much! May 21, 2025 at 6:19 AM, Döme György F.A : Checking May 21, 2025 at 6:21 AM, FA-CS-AGV-Masoud : This message was deleted. May 21, 2025 at 6:21 AM, FA-CS-AGV-Masoud : Solved May 21, 2025 at 6:22 AM, Balázs Róbert SL : Thx May 21, 2025 at 6:27 AM, Mohammad Amir : @Zoltán Harasztia FA @FA Please check M0STK014_C02 ,there is Crane shelf in abort alarm. Thank you very much! May 21, 2025 at 6:30 AM, Zoltán Harasztia FA : Cheking May 21, 2025 at 6:37 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.21 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assy GF Ca NC OH Eunhyang GF Ca NC Kim Jongwon May 21, 2025 at 6:37 AM, Zoltán Harasztia FA : Solved May 21, 2025 at 6:38 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 6:45 AM, Döme György F.A : In warehouse 4, I'm not sure which sensor is triggering the alarm, but it's a false alert. It doesn't affect operations. May 21, 2025 at 6:45 AM, Mohammad Amir : Okay, I understand. Thank you very much for the information. May 21, 2025 at 8:26 AM, FACS_JaewonShin : ■ 21st May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 21, 2025 at 11:54 AM, SKOH2/제조-셀,모듈 출하/김병호 : 매니저님 지금 오전 셀 출하 작업이 마무리되어서 반송작업을 12시 30분 이후에 다시 시작하려 합니다. 에어커튼 확인 작업 지금 해주시면 될거 같습니다 May 21, 2025 at 11:56 AM, KIM SEYEON [김세연]_FA : @FACS_JaewonShin 팀장님 모듈34번창고 사용여부 공유 부탁드립니다. May 21, 2025 at 12:05 PM, FACS_JaewonShin : Stk34번창고 block된거 전부 풀었고 현장에서 티칭 및 주행 확인완료 하였습니다. Stk34,35 둘다 사용 가능하고 stk34 자재 입고 되는것 까지 확인했습니다. May 21, 2025 at 2:10 PM, 요셉 : Please move the agv in front of line 10 to the side. Thank you May 21, 2025 at 2:11 PM, FA-CS-AGV-Masoud : Sure May 21, 2025 at 2:11 PM, 요셉 : Agv6! May 21, 2025 at 2:13 PM, FA-CS-AGV-Masoud : Done May 21, 2025 at 2:40 PM, Mohammad Amir : @FA @Zoltán Harasztia FA Please check M0STK011_C01 /C02 there is MCP 0140MCS,MC06 on Inverter power error. Thank you very much! May 21, 2025 at 2:40 PM, Döme György F.A : Checking May 21, 2025 at 2:40 PM, Mohammad Amir : Thank you very much! May 21, 2025 at 2:56 PM, Döme György F.A : Solved May 21, 2025 at 2:56 PM, Mohammad Amir : Thank you very much! May 21, 2025 at 4:07 PM, R. József C SL EOL : Line 9 #9agv ACS ALIVE ALARM please check May 21, 2025 at 4:08 PM, FA-CS-AGV-Masoud : Coming May 21, 2025 at 4:08 PM, R. József C SL EOL : Eol May 21, 2025 at 4:09 PM, FA-CS-AGV-Masoud : Solved May 21, 2025 at 4:32 PM, 박태영 invited 김 민성. May 21, 2025 at 5:45 PM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra Sidecover transfert kellene alapba állítani Sikerült a servot "leverni" May 21, 2025 at 5:46 PM, Zoltán Harasztia FA : Megyünk May 21, 2025 at 5:49 PM, R. József C SL EOL : Eol 12#agv hibával áll May 21, 2025 at 5:49 PM, Zoltán Harasztia FA : Kész May 21, 2025 at 5:50 PM, Muneeb Ur Rehman : Checking May 21, 2025 at 5:53 PM, Zoltán Harasztia FA : Solved May 21, 2025 at 6:05 PM, Őri Imre : Sziasztok! May 21, 2025 at 6:06 PM, Őri Imre : Már semmi. Megoldottam May 21, 2025 at 6:24 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (2): Magyar Balázs, Novák Károly Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 21, 2025 at 8:41 PM, Éváné Bori Viktória : Helló! BOX PACKING, move the AGV please, MES palette. May 21, 2025 at 9:54 PM, Éváné Bori Viktória : Helló. Eol, AGV AGV's move please May 21, 2025 at 9:54 PM, Muneeb Ur Rehman : AGV number ? May 21, 2025 at 9:56 PM, Muneeb Ur Rehman : Can you please mention agv number ? May 21, 2025 at 10:13 PM, Éváné Bori Viktória : Helló! Box packingen nem jó a címkéző a pántoló után. Kérlek nézzetek meg! @N.Gábor F.A. @Dávid F.A. May 21, 2025 at 10:14 PM, N.Gábor F.A. : Megyek May 21, 2025 at 10:41 PM, Őri Imre : 3-4 sor között leált az egyik kis AGV. Meg tudnátok nézni? May 21, 2025 at 10:41 PM, Őri Imre : Köszönöm May 21, 2025 at 10:42 PM, Muneeb Ur Rehman : Checking May 21, 2025 at 10:45 PM, Muneeb Ur Rehman : Fixed May 21, 2025 at 11:03 PM, Őri Imre : Thx. May 22, 2025 at 1:11 AM May 22, 2025 at 1:11 AM, Szijjártó Balázs : Modul Line 3-4 között a raktár panelje hibára futott, bemenő oldalon van egy paletta amivel baja van. May 22, 2025 at 1:17 AM, N.Gábor F.A. : Jövök May 22, 2025 at 6:24 AM, R. József C SL EOL : Gyertek kérlek boxpackingra May 22, 2025 at 6:25 AM, Zoltán Harasztia FA : Megyünk May 22, 2025 at 8:31 AM, FACS_JaewonShin : ■ 22nd May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 22, 2025 at 9:02 AM, Mohammad Amir : @Zoltán Harasztia FA Please check F6CPM010_P01,this port is OOS and because of this one job is pending. Thank you very much? May 22, 2025 at 9:05 AM, Döme György F.A : Checking May 22, 2025 at 9:11 AM, Döme György F.A : There is no problem with the port. I will wait until the AGV brings out the pallet. May 22, 2025 at 9:16 AM, Mohammad Amir : This message was deleted. May 22, 2025 at 9:17 AM, Mohammad Amir : This message was deleted. May 22, 2025 at 9:19 AM, Mohammad Amir : It was OOS because of "Stopper #2 Up/Down time over error" that's why one job for empty pallet for EOL-06 was not proceeding. However now this Alarm has been cleared and everything is back to normal. Thank you very much! May 22, 2025 at 9:19 AM, Döme György F.A : Yes, I see it. The AGV is bringing the next pallet. May 22, 2025 at 9:41 AM, 정낙정(JEONG NAK JEONG) : @fa cell buffer storage no 2 carrige get, put load check error occurred. May 22, 2025 at 9:42 AM, Döme György F.A : Checking May 22, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FA team @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @[민겸]MinGyum @이정훈(Jeonghoon Lee) 금주 셀완제품 출하 작업전 완제품 창고에서 배출 완료되어 출하 준비된 제품중에 미밴딩 제품이 다수 발생하고 있습니다. 간헐적으로 1~2건은 출하팀에서 처리하고 있으나, 금주만 15~20건이상의 미밴딩 제품이 나오고 있어 해당 설비 담당자께서는 확인 부탁드리겠습니다 May 22, 2025 at 10:35 AM, Herceg Sándor SSL/C : @R. József C SL EOL Figyeljék az emberek. Ha jol ertelmezem nincs mindem paletta pántolva. Nézzétek ,hogy nálunk rendben legyen May 22, 2025 at 10:37 AM, R. József C SL EOL : Figyelik, valamint még is állítják a gépet és pótolják rajta Valerii-ék May 22, 2025 at 12:34 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Ismét segítséget szeretnék May 22, 2025 at 12:38 PM, Zoltán Harasztia FA : Kész May 22, 2025 at 2:55 PM, R. József C SL EOL : Gyertek kérlek ismét boxpackingra May 22, 2025 at 2:55 PM, Zoltán Harasztia FA : Megyünk mindjárt May 22, 2025 at 3:02 PM, Döme György F.A : Kész May 22, 2025 at 3:26 PM, Balázs Róbert SL : 3 Line cell loading, the AGV does not bring material. Please check May 22, 2025 at 3:32 PM, Zoltán Harasztia FA : Már megyén az anyag May 22, 2025 at 4:25 PM, [민겸]MinGyum : Please move AGV in front of Formation GF 9Line for a while. May 22, 2025 at 4:28 PM, R. József C SL EOL : @Zoltán Harasztia FA May 22, 2025 at 4:29 PM, Döme György F.A : Coming May 22, 2025 at 4:32 PM, Duna Don : Solved May 22, 2025 at 5:12 PM, Balázs Róbert SL : Line4 cell loading AGV problem May 22, 2025 at 5:14 PM, Duna Don : In the way May 22, 2025 at 5:14 PM, Balázs Róbert SL : Thx May 22, 2025 at 5:15 PM, Zoltán Harasztia FA : Solved May 22, 2025 at 5:20 PM, Balázs Róbert SL : A 3as sorra nem hoz insulation covert May 22, 2025 at 5:20 PM, Balázs Róbert SL : Nézzétek meg légyszíves May 22, 2025 at 5:20 PM, Zoltán Harasztia FA : Nézem May 22, 2025 at 5:25 PM, Zoltán Harasztia FA : Most már jön May 22, 2025 at 5:30 PM, R. József C SL EOL : Eol 9 Nem érkezik agv a full palettáért Előtte várakozik de nem megy May 22, 2025 at 5:32 PM, Döme György F.A : Nézzük May 22, 2025 at 5:35 PM, Döme György F.A : Már viszi.Újra kellett indítani a port-ot May 22, 2025 at 5:45 PM, R. József C SL EOL : Köszönöm May 22, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1): Magyar Balázs, Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 22, 2025 at 6:17 PM, Jun(정우준)_SKOH FA : Night shift 05.22 18:00-06:00 Jeong woojun May 22, 2025 at 10:47 PM, Éváné Bori Viktória : Sziasztok! Oldalfal probléma van a Box packingen, kérlek nézzétek meg. @N.Gábor F.A. @Dávid F.A. May 22, 2025 at 10:51 PM, N.Gábor F.A. : Megyek May 22, 2025 at 11:43 PM, Éváné Bori Viktória : Helló! Eol AGV9-17-18 move please. May 22, 2025 at 11:43 PM, FA CS AGV David 데이비드 : Ok May 23, 2025 at 2:50 AM May 23, 2025 at 2:50 AM, 조보행(CHO BO HAENG) left this chatroom. May 23, 2025 at 6:11 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 3 Overtime ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 23, 2025 at 6:11 AM, 이주봉PM LEE JUBONG(FA) : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM Samkoo 이민재 최기수 May 23, 2025 at 6:33 AM, 전용빈 (Yongbin jeon) left this chatroom. May 23, 2025 at 8:10 AM, FACS_JaewonShin : ■ 23rd May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 23, 2025 at 2:15 PM, Szentirmai Z. A/SSL : Please move to EOL AGVs to other position. Thank you May 23, 2025 at 2:16 PM, Duna Don : Checking May 23, 2025 at 2:19 PM, Duna Don : Done ✅ May 23, 2025 at 2:22 PM, Szentirmai Z. A/SSL : Thank you May 23, 2025 at 2:25 PM, Szentirmai Z. A/SSL invited Telkes Tamás SL A. May 23, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 11+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(0): Translater: -- --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Hara May 23, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 10+1+1/12+1 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(1): Böröczki Balázs Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Harasztia Zoltán -------------- May 24, 2025 at 6:01 AM May 24, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime, 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 24, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23á4. "B" műszak, 12+2/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(0): Shift Change(0): Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(2): 방혁_이반차 (Bang Hyuk May 24, 2025 at 6:16 PM, FA CS AGV David 데이비드 : @FA can someone please check the boxpacking error May 24, 2025 at 6:35 PM, Gerbovits Kevin : Going May 24, 2025 at 6:39 PM, FA CS AGV David 데이비드 : Thank yoi May 24, 2025 at 7:43 PM, Nikolett SL/B EOL : Sziasztok Boxpacking pántszallag probléma van valaki tudna menni ? Köszönöm May 24, 2025 at 7:45 PM, Gerbovits Kevin : Csináljuk! May 24, 2025 at 8:51 PM, 김대은 : Please move to 9,10EOL 9AGVs to other position. May 24, 2025 at 10:40 PM, VK (mcs) : @Manufacturing Please check 3rd line module assembly M3MFA300-P29. It's out of service and carrier is waiting in CNV output port and blocked the way. Thx May 25, 2025 at 2:22 AM May 25, 2025 at 2:22 AM, KIM SEYEON [김세연]_FA : @유경호(RYU KYEONGHO) @[민겸]MinGyum 혹시 오늘 누가 근무신가요? 잠시 통화가능하신가요? May 25, 2025 at 2:22 AM, KIM SEYEON [김세연]_FA : what is the error name on box packing machine? May 25, 2025 at 2:23 AM, 심정민 (Shim Jungmin) : 야간 근무 생산관리 없습니다. 피엠님 May 25, 2025 at 2:53 AM, 심정민 (Shim Jungmin) : @박광희(Park kwang hui) 박스 포장기 현황 간단히 공유좀 부탁드립니다. 발생시간 , 현상 , 조치 내용 , 포장 지연 수량 May 25, 2025 at 2:54 AM, 노영일 (Yeongil Noh) : E805 E603 화성 out되는대로 평일 내내 출하 나가는 상황으로 하루라도 끊기면 출하 영향 큽니다. May 25, 2025 at 3:03 AM, Nikolett SL/B EOL : Kaphatnék kis infót arról hogy miért nem jó még mindig ? Fontos lenne hogy termeljen a Boxpacking. Köszönöm May 25, 2025 at 3:03 AM, 심정민 (Shim Jungmin) : @김영동(KIM YOUNG DONG) FA 야간 담당자분들 같이 확인 요청드렸으니, 임시조치라도 가능한 부분있는지 같이 확인 해주시고 내용 공유 부탁드립니다. 밴드 가열 시간, 실측 온도, 가열부 동작, 밴딩 동작 특이점 확인(정상 동작하는 밴딩기 대비) 해보면 어느정도 답 나올것 같습니다. May 25, 2025 at 3:09 AM, KIM SEYEON [김세연]_FA : 네 빨리 조치하겠습니다. May 25, 2025 at 3:09 AM, KIM SEYEON [김세연]_FA : 우선 임시조치 하지 말아주시고, 저희 cs인원이 대응하겠습니다. May 25, 2025 at 4:01 AM, 박광희(Park kwang hui) : ■ 박스 포장기 현황 공유 드립니다. 1. 발생시간 : 19:40 2. 현상 : INV05 1ST CAM FAULT alram 발생, 자동 운행시 도그가 감지 센서까지 도달 하지 못하여 작업 완료 신호 전달 불가 3. 조치내용 : FA 방혁, 김지수 PM 확인후 해당건 조치되었으나 밴드-1 밴딩작업중 밴딩끈이 녹아 작업 진행 불가 상태입니다. 4. 포장지연 PLT : 100ea May 25, 2025 at 4:26 AM, Vadász Dóra SSL/B : Sziasztok #16-os agv hibán áll, 3mas cell packinggal szemben. Kérem nézzétek meg. Köszönöm May 25, 2025 at 4:42 AM, 요셉 : Eol 4,5,6L Please check if the empty palette is not coming in May 25, 2025 at 4:43 AM, FA CS AGV David 데이비드 : @FA can someone please check the STK13_P04. The crane isn't moving and there's double cargo on both sides. Thanks May 25, 2025 at 4:45 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B May 25, 2025 at 4:45 AM, VK (mcs) : @FA Please check Cell buffer M0STK013 R111193 is on the crane but it's not moving. Destination is port 1. Thx May 25, 2025 at 4:46 AM, Vadász Dóra SSL/B : #9-es szintén May 25, 2025 at 4:46 AM, Vadász Dóra SSL/B : Ez mondjuk oda pakolna, ahol már van paletta. Hm.. May 25, 2025 at 4:49 AM, Vadász Dóra SSL/B : #12-es is szenved May 25, 2025 at 4:49 AM, FA CS AGV David 데이비드 : It's all related to the double cargo causes by the crane. Waiting on the FA team to fix and then it'll move May 25, 2025 at 4:51 AM, FA CS AGV David 데이비드 : It's the same for AGV 12,16, and 09 May 25, 2025 at 4:52 AM, FA CS AGV David 데이비드 : @Boromisza Zoltán @Gerbovits Kevin please can anyone assist? May 25, 2025 at 4:55 AM, Gerbovits Kevin : Going May 25, 2025 at 4:55 AM, FA CS AGV David 데이비드 : Thanks May 25, 2025 at 5:11 AM, KIM SEYEON [김세연]_FA : 5시반쯤 cs인원도착합니다. May 25, 2025 at 5:16 AM, 박광희(Park kwang hui) : 네 감사합니다! May 25, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) Technician, 1 Sl, 1 Overtime 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 25, 2025 at 6:20 AM, 원승연(Seungyeon Won) : Please share the results once the inspection is complete. I will prepare for the restart. May 25, 2025 at 7:56 AM, 원승연(Seungyeon Won) : @노영일 (Yeongil Noh) @심정민 (Shim Jungmin) 현재 박스 포장기 조치 지연으로 인한 팔레트 수량 공유 드립니다. Z : 118 PLT R : 230 PLT May 25, 2025 at 8:08 AM, 심정민 (Shim Jungmin) : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 조치 진행 상황 공유 부탁드립니다. May 25, 2025 at 9:01 AM, 배병민 (Bae Byoungmin) : 텐션 모터 교체가 필요한 상황입니다. 교체는 약 2시간 내 가능할것으로 보입니다 May 25, 2025 at 9:11 AM, 심정민 (Shim Jungmin) : 공유 감사합니다. 지연 오래되서 출하 걱정되는 상황이니 빠른 조치 및 공유 부탁드립니다. May 25, 2025 at 10:58 AM, Mohammad Amir : @Csepi Árpád @FA Please check M0STK011_C01 there is CRANE fork left collapse detect 3 error. Several jobs are pending because of this issue. Thank you very much! May 25, 2025 at 11:04 AM, 원승연(Seungyeon Won) : Plz turn on AGV #6 Thanks! May 25, 2025 at 11:05 AM, FA/CS/AGV/Taimur : Sure. May 25, 2025 at 11:05 AM, 원승연(Seungyeon Won) : Sorry wait May 25, 2025 at 11:28 AM, 원승연(Seungyeon Won) : Buffer warehouse #1,3 check please The pallet is being delayed. May 25, 2025 at 11:57 AM, 이재근(lee jae geun) : plz check AGV 13 May 25, 2025 at 11:58 AM, FA/CS/AGV/Taimur : Check May 25, 2025 at 12:08 PM, Magosi Erik : Module Line3-Line4 material agv too close to eachother. Please check May 25, 2025 at 12:08 PM, Magosi Erik : @Csepi Árpád May 25, 2025 at 12:09 PM, FA/CS/AGV/Taimur : Checking May 25, 2025 at 12:16 PM, 원승연(Seungyeon Won) : What was the reason the pallet was improperly positioned on the rack-to-rack conveyor? We will inspect it because there were cells in that pallet. @FA May 25, 2025 at 12:58 PM, 배병민 (Bae Byoungmin) : 박스포장기 정상 생산 진행중입니다. 조건 세팅으로 시간이 좀더 소요되었습니다. 현재 모니터링중이며 정상 진행중입니다. 감사합니다 May 25, 2025 at 1:16 PM, 원승연(Seungyeon Won) : This message was deleted. May 25, 2025 at 1:17 PM, 원승연(Seungyeon Won) : Z pallet box packing start @Szentirmai Z. A/SSL May 25, 2025 at 1:18 PM, Csepi Árpád : The M0STK011 crane is now operating in automatic mode again! May 25, 2025 at 1:18 PM, Mohammad Amir : Köszönöm szepen! May 25, 2025 at 2:24 PM, 원승연(Seungyeon Won) : @배병민 (Bae Byoungmin) PM님 혹시 박스포장기 버퍼수량을 퇴근하시기 전까지만 1개만 더 늘려주실 수 있으실까요? AGV에서 오는게 조금 지연되고 있습니다. May 25, 2025 at 2:29 PM, 배병민 (Bae Byoungmin) : @박태영 PM님 안녕하세요 화성 박스포장기 생산량을 좀더 올리기위해.. 금일 주간 셀포장기에서 박스포장기 투입 AGV 버퍼 수량을 2>3으로 변경 가능하실까요? 야간 박스포장기 밴딩기 이슈로 조치에 시간이 다수 발생되어 출하 생산량에 문제가 안되도록 하기 위함입니다. May 25, 2025 at 2:54 PM, 박태영 : 확인 좀 해 볼게요 May 25, 2025 at 2:54 PM, Szentirmai Z. A/SSL : @Mohammad Amir Does not supply AGV pallet to EOL#6, please check May 25, 2025 at 2:55 PM, Mohammad Amir : Checking May 25, 2025 at 2:55 PM, Szentirmai Z. A/SSL : EOL#5 also May 25, 2025 at 2:57 PM, Szentirmai Z. A/SSL : There is no empty R palette in the buffer May 25, 2025 at 2:57 PM, Szentirmai Z. A/SSL : @원승연(Seungyeon Won) May 25, 2025 at 2:57 PM, 원승연(Seungyeon Won) : This message was deleted. May 25, 2025 at 2:58 PM, 원승연(Seungyeon Won) : We will change T pallet set May 25, 2025 at 2:58 PM, Mohammad Amir : Unfortunately for both EOL#5&#6 there is no material available which can be transfer. However there is an active LR as soon as materials will be available jobs will be created. Thank you! May 25, 2025 at 3:24 PM, Mohammad Amir : For Your information:- Issue for EOL#6 has been resolved ✅. And pallet on its way. Currently available pallet for EOL #6 line is 1161. Thank you very much! May 25, 2025 at 3:41 PM, 박태영 : 변경 처리 되었습니다. 포장기 입고는 Max 3개까지 잡 생성됩니다. May 25, 2025 at 3:41 PM, 박태영 : 향후 ITS 받고 처리해야합니다 프로세스는 주중에 공유드릴게요 May 25, 2025 at 3:46 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 감사합니다 May 25, 2025 at 3:51 PM, KIM SEYEON [김세연]_FA : 감사합니다 May 25, 2025 at 5:38 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK013_C01/02 there MCP Ankle Detection Left. Thank you very much! May 25, 2025 at 5:45 PM, Csepi Árpád : “I checked it! But the repair can be finished by the next shift.” May 25, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.25. "B" műszak, 12+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(0): Sick(0): Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Harasztia Z May 25, 2025 at 6:15 PM, Nikolett SL/B EOL : hello 9-10 Line AGV does not bring the empty Palette Could someone come? Thanks May 25, 2025 at 6:18 PM, Shakir (MCS) : Already has job but M0STK013 is OOS Thank you May 26, 2025 at 12:28 AM May 26, 2025 at 12:28 AM, Nikolett SL/B EOL : Sziasztok a 3 as Buffer megállt hibára valaki tudna menni ? May 26, 2025 at 12:31 AM, Nikolett SL/B EOL : *1 May 26, 2025 at 12:31 AM, Zoltán Harasztia FA : Megyek May 26, 2025 at 2:48 AM, Nikolett SL/B EOL : Újra ez a hiba fordult elő May 26, 2025 at 2:48 AM, Zoltán Harasztia FA : Megyünk May 26, 2025 at 2:55 AM, Zoltán Harasztia FA : Kész May 26, 2025 at 4:00 AM, Vadász Dóra SSL/B : @Shakir (MCS) Z303572 / Z303590 Agv#10 module Z303492 / Z303578 Agv#8 module Please cancel the Job. The pallets were removed from the AGV due to faulty packaging. May 26, 2025 at 4:04 AM, Shakir (MCS) : Job has been cancelled as per request Thank you May 26, 2025 at 4:07 AM, Vadász Dóra SSL/B : Thank you May 26, 2025 at 6:08 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Nagy Zsolt, Kasztel Balázs Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(4): GF: Novák Zoltán, Zsurbej Zsolt 1F: Novák Károly, Kovács Szabolcs, Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs May 26, 2025 at 6:49 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun May 26, 2025 at 7:14 AM, Szijjártó Balázs : Modul L1-en a kis AGV-k kicsit megkeveredtek.Nézzen rá valaki légyszi! May 26, 2025 at 7:15 AM, Duna Don : Checking May 26, 2025 at 7:17 AM, Duna Don : Solved May 26, 2025 at 7:23 AM, Szijjártó Balázs : Thanks! May 26, 2025 at 8:24 AM, FACS_JaewonShin : ■ 26th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 26, 2025 at 8:41 AM, Éváné Bori Viktória : Helló! Eol AGV 18 unloading time over alarm in buffer, eol 9-10 May 26, 2025 at 8:41 AM, Duna Don : Checking May 26, 2025 at 8:44 AM, Duna Don : AGV is working now. Tnx May 26, 2025 at 9:37 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum @유경호(RYU KYEONGHO) 금일부터 박스해체기 사용 예정입니다. 해체기 앞에 자재 정리 부탁드립니다. May 26, 2025 at 9:37 AM, [민겸]MinGyum : 확인하겠습니다 May 26, 2025 at 10:11 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님 11시 교육때 통역지원해주시나요? May 26, 2025 at 10:57 AM, 배병민 (Bae Byoungmin) : 통역이 잠시 지원 가능하실까요? May 26, 2025 at 11:00 AM, 배병민 (Bae Byoungmin) : PM님 죄송해요 저희 통역분 현장에 계십니다 가능합니다 May 26, 2025 at 11:03 AM, [민겸]MinGyum : 저도 지금 이동하겠습니다. May 26, 2025 at 11:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FA @[민겸]MinGyum @이정훈(Jeonghoon Lee) @유경호(RYU KYEONGHO) 안녕하세여 PM님 금일 셀 출하 작업 진행중인데 셀 미밴딩 제품이 너무 많이 나오고 있어서 확인 부탁드립니다. 벌써 10셋트 이상 나와서요 확인부탁드립니다. May 26, 2025 at 11:31 AM, 배병민 (Bae Byoungmin) : 네 아침에 현장에서 2단밴딩에서 밴드 터지는거 확인 하였습니다. 설비 점검 진행하며 모니터링 해보겠습니다 May 26, 2025 at 11:59 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 펨님 May 26, 2025 at 12:10 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @[민겸]MinGyum 화성 박스 해체기 생산 시작되었습니다. 우선 Cell 완제품 34번 창고에 있는 Z 팔레트 30set 출고 진행중입니다 May 26, 2025 at 1:26 PM, Őri Imre : 3-4 sor között a két kis AGV útban van egymásnak. May 26, 2025 at 1:26 PM, Őri Imre : Meg tudnátok nézni May 26, 2025 at 1:30 PM, FA/CS/AGV_ Asjad : Solved May 26, 2025 at 1:30 PM, Őri Imre : Thx. May 26, 2025 at 2:07 PM, Őri Imre : 3-4 sor között a két kis AGV útban van egymásnak. May 26, 2025 at 2:08 PM, Őri Imre : Ismét ugyanaz a hiba May 26, 2025 at 2:08 PM, FA/CS/AGV/Taimur : Checking May 26, 2025 at 2:14 PM, FA/CS/AGV/Taimur : Solved May 26, 2025 at 2:20 PM, 배병민 (Bae Byoungmin) : Please share the cause of the same problem. @FACS_Youngmin LEE 주임님 같이 확인 한번 부탁드립니다 May 26, 2025 at 2:21 PM, FA/CS/AGV/Taimur : Yes sire. I am writing report on it. It is being caused by ACS traffic logic failure. May 26, 2025 at 2:50 PM, FACS_Youngmin LEE : @배병민 (Bae Byoungmin) 셀버퍼 모듈 원자재 3,4라인 저상형 VC02이 4028노드 스핀턴 시 VC03이 4024노드에 대기하지 않고 4026노드로 진입하여 VC02와 VC03이 ODS가 걸리는 현상입니다. 해결방안 찾아서 조치하도록 하겠습니다. May 26, 2025 at 3:54 PM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum @정낙정(JEONG NAK JEONG) 박스포장기 NG port로 지게차 부탁합니다. Base PLT 하부 커버 파손이 심해서 Side cover 조립이 불가하여 배출후 재작업 부탁합니다 May 26, 2025 at 3:54 PM, [민겸]MinGyum : 알겠습니다. May 26, 2025 at 4:06 PM, 배병민 (Bae Byoungmin) : PLT ID R111026 May 26, 2025 at 4:48 PM, Éváné Bori Viktória : Helló! EOL AGV 15, 9 , 17, 8.... move please. AGV 12 Floor Bumper sensor alarm. May 26, 2025 at 4:49 PM, FA/CS/AGV/Taimur : Sure May 26, 2025 at 5:48 PM, R. József C SL EOL : Eol 9-es sorral szemben betöltő portnál áll az agv hibával Nézzétek meg kérlek Köszönöm May 26, 2025 at 5:49 PM, FA-CS-AGV-Masoud : Coming May 26, 2025 at 5:52 PM, FA-CS-AGV-Masoud : Solved May 26, 2025 at 5:58 PM, R. József C SL EOL : Eol 2es buffer riaszt Nézzétek meg kérlek May 26, 2025 at 6:01 PM, Döme György F.A : Nemsokára érkezünk May 26, 2025 at 6:06 PM, Halász György SL : Good afternoon, Modul GF line1 cell AGV delay. May 26, 2025 at 6:06 PM, FA-CS-AGV-Masoud : This message was deleted. May 26, 2025 at 6:06 PM, Halász György SL : Thanks May 26, 2025 at 6:06 PM, FA-CS-AGV-Masoud : Checking May 26, 2025 at 6:10 PM, FA-CS-AGV-Masoud : AGV 8 is on the way . Thanks May 26, 2025 at 6:11 PM, R. József C SL EOL : Gyertek kérlek a boxpackingra Kicsomagoló résznél probléma van a sidecovernál May 26, 2025 at 6:12 PM, Zoltán Harasztia FA : Hamarosan érkezünk May 26, 2025 at 6:12 PM, R. József C SL EOL : Köszönöm Úgy néz ki, egész éjjel menni fog 🥲 May 26, 2025 at 6:20 PM, Baek Hojong(백호종)FA : Night shift FA Date: 2025.05.26 Time:18:00~06:00 Baek Hojong 백호종PM 1. Elec 송태용 (Song Taeyong) 2. Assy 1F 김종원 (Kim Jongwon) GF 오은향 (OH Eunhyang) May 26, 2025 at 6:32 PM, Döme György F.A : Megy a raktár May 26, 2025 at 6:34 PM, Balázs Róbert SL : Sziasztok! It doesn't bring a cell to Line4 May 26, 2025 at 6:42 PM, Döme György F.A : Szia.Cell buffer 2-vel volt egy kis gond.Megy a raktár pakol folyamatosan,meg fognak érkezni a sorokra a cellák itt vagyok figyelem. May 26, 2025 at 6:42 PM, Balázs Róbert SL : Ok May 26, 2025 at 7:55 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV036_M01 carrier id : R200101 (empty) “MCS buzzer error” 발생하여 빈트레이 입고 되지 않고 있습니다. 해당원인 확인 부탁드립니다 May 26, 2025 at 7:58 PM, [민겸]MinGyum : 아마 pallet 등록을 안해서 그런것같네요. May 26, 2025 at 8:40 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget Vákuum probléma May 26, 2025 at 8:40 PM, Zoltán Harasztia FA : Megyek May 26, 2025 at 8:40 PM, R. József C SL EOL : Semmi Látom itt a Gyuri May 26, 2025 at 9:17 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. May 26, 2025 at 9:18 PM, SKOH2/제조-셀,모듈 출하/김병호 : 명일 출하 작업전 도크에 있는 빈 트레이를 모두 입고 해야해서 빠른 확인부탁드립니다 May 26, 2025 at 9:20 PM, Shakir (MCS) : @FA Please check M0CNV036_RTV not moving since 21:06. Thank you May 26, 2025 at 9:20 PM, Zoltán Harasztia FA : Cheking May 26, 2025 at 9:22 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS,MCS 남측 셀 도크에서 현재 빈트레이 입고 작업중입니다. M0CNV036_M01~ M0CNV036_RTV01 까지 셀트레이가 밀려있습니다 M0STK034 bank 빠른 확인 부탁드립니다 May 26, 2025 at 9:23 PM, 배병민 (Bae Byoungmin) : 저희 테크니션 해당 RTV 확인 중입니다. May 26, 2025 at 9:26 PM, Zoltán Harasztia FA : Solved May 26, 2025 at 9:54 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 4es sorra nem hoz az AGV palettát. Kérlek nézzetek meg May 26, 2025 at 9:54 PM, Zoltán Harasztia FA : Nézzük May 26, 2025 at 9:55 PM, Zoltán Harasztia FA : Már viszi az agv May 26, 2025 at 9:56 PM, R. József C SL EOL : Kapcsold vissza autóra kérlek most kapcsoltam manura 1 percce May 26, 2025 at 10:00 PM, R. József C SL EOL : @Zoltán Harasztia FA @Döme György F.A Boxpacking kicsomagoló el van indítva újra 30 perces szünetekkel ha mást nem, úgy próbáljátok kérlek May 26, 2025 at 10:00 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS,MCS 남측 셀 도크 1F M0STK034 전단 RTV 기동 정지상태입니다 M0CNV036_M01~ M0CNV036_RTV01 까지 셀트레이가 밀려있습니다 빠른 확인 부탁드립니다 May 26, 2025 at 10:02 PM, Zoltán Harasztia FA : Cheking May 26, 2025 at 10:06 PM, R. József C SL EOL : Ha lehetséges, akkor az üres palettákat lehet esetleg a 3-4 bufferbe küldeni a kicsomagoló részről? MCS kolega May 26, 2025 at 10:06 PM, Zoltán Harasztia FA : Solved May 26, 2025 at 10:07 PM, R. József C SL EOL : Esetleg, megoldható lenne? May 26, 2025 at 10:07 PM, FA-CS-AGV-Masoud : @Shakir (MCS) could you check it please bhai?? May 26, 2025 at 10:09 PM, R. József C SL EOL : If it were possible, the empty pallets of the unpacking machine could be sent to buffers 3 and 4, thus reducing the load on buffer 2. May 26, 2025 at 10:10 PM, Shakir (MCS) : Currently M0STK013 is OOS May 26, 2025 at 10:11 PM, Shakir (MCS) : Already 3 job exists for M0STK011 Job jobs on AGV May 26, 2025 at 10:56 PM, R. József C SL EOL : Eol 9-es sorral szemben betöltő portnál áll hibával az agv #16 May 26, 2025 at 10:56 PM, FA-CS-AGV-Masoud : Coming May 26, 2025 at 10:57 PM, FA-CS-AGV-Masoud : Solved May 26, 2025 at 11:44 PM, R. József C SL EOL : Eol 8-9 előtt 16-os agv acs alive alarm May 26, 2025 at 11:44 PM, FA-CS-AGV-Masoud : Coming May 26, 2025 at 11:46 PM, FA-CS-AGV-Masoud : Solved May 26, 2025 at 11:54 PM, Sási Zsolt SL/C/ EOL : 13as AGV áll a 9es sor kimenetén. Kérlek nézzétek meg May 26, 2025 at 11:55 PM, FA-CS-AGV-Masoud : Coming May 26, 2025 at 11:55 PM, Zoltán Harasztia FA : Solved May 27, 2025 at 1:14 AM May 27, 2025 at 1:14 AM, Halász György SL : Hi, Modul GF line1 empty dunnage delay. May 27, 2025 at 1:18 AM, Zoltán Harasztia FA : Már megy May 27, 2025 at 1:19 AM, Halász György SL : Thanks May 27, 2025 at 2:23 AM, R. József C SL EOL : Kérnék boxpackingra segítséget May 27, 2025 at 2:24 AM, Zoltán Harasztia FA : Mindjárt ott vagyok May 27, 2025 at 2:24 AM, R. József C SL EOL : Köszönöm May 27, 2025 at 2:29 AM, Sási Zsolt SL/C/ EOL : 18as AGV hibával áll. Kérlek ellenőrizzétek May 27, 2025 at 2:29 AM, FA-CS-AGV-Masoud : Coming May 27, 2025 at 2:33 AM, FA-CS-AGV-Masoud : Solved May 27, 2025 at 4:43 AM, Sási Zsolt SL/C/ EOL : 6os AGV áll Kérlek nézzétek meg May 27, 2025 at 4:43 AM, FA-CS-AGV-Masoud : Coming May 27, 2025 at 4:46 AM, FA-CS-AGV-Masoud : Solved May 27, 2025 at 4:51 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 Carrier data receive timeout May 27, 2025 at 4:51 AM, Zoltán Harasztia FA : Cheking May 27, 2025 at 5:03 AM, Zoltán Harasztia FA : Solved May 27, 2025 at 5:57 AM, R. József C SL EOL : Eol 10-es sorral szemben állnak az agv-k a buffer portoknál May 27, 2025 at 5:58 AM, Muneeb Ur Rehman : Checking May 27, 2025 at 5:58 AM, Dániel Hufnágel : This message was deleted. May 27, 2025 at 5:59 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+2 overtime Overtime (2): Böröcz Tamás, Cehman Zsolt Sick (0):- Holiday (4): Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt, Martina Dávid Shift change(0): Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Cehman Zsolt Assembly(4): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Böröcz Tamás Modul(2): Nagy Gábor, Magyar Balázs May 27, 2025 at 6:34 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun May 27, 2025 at 8:50 AM, Éváné Bori Viktória : Sziasztok! Box packingen a kicsomagoló oldalon elment a szervó az oldalfal leszedőnél. @N.Gábor F.A. @Dávid F.A. May 27, 2025 at 8:51 AM, N.Gábor F.A. : Megyünk May 27, 2025 at 8:53 AM, FACS_JaewonShin : ■ 27th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 27, 2025 at 8:58 AM, Őri Imre : 3-4 sor között a kis AGV betöltésnél hibába áll! Meg tudnátok nézni? May 27, 2025 at 8:58 AM, Őri Imre : Köszönöm May 27, 2025 at 9:00 AM, Muneeb Ur Rehman : On the way May 27, 2025 at 9:32 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님. 오늘도 11시에 교육진행 하시나요? May 27, 2025 at 9:40 AM, 배병민 (Bae Byoungmin) : 네, 금일 11시 하겠습니다. 명일부터는 9시30분에 교육 가능하실까요? May 27, 2025 at 9:43 AM, [민겸]MinGyum : 네. 전달하도록 하겠습니다. May 27, 2025 at 10:58 AM, Szijjártó Balázs : Hi! No empty dunnage arrives on Line 1! May 27, 2025 at 11:03 AM, duzzaman Md (MCS) : AGV is on the way. VC14 May 27, 2025 at 11:04 AM, duzzaman Md (MCS) : It got delayed because CNV031 RTV 01 had Interface error May 27, 2025 at 11:08 AM, 배병민 (Bae Byoungmin) : 교육인원이 아직입니다 May 27, 2025 at 11:09 AM, [민겸]MinGyum : 리더에게 전달하겠습니다. 현재 회의중이라서요 May 27, 2025 at 11:50 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum PM님 셀버퍼창고 수동 포트에서 Z 공팔레트 수동투입중인데 1번창고로 투입 부탁드립니다. 현재 수동투입을 2번창고 사용하고있어 부하가 있습니다 May 27, 2025 at 1:59 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님 현장에 계신가요? May 27, 2025 at 2:00 PM, 배병민 (Bae Byoungmin) : 네 확인하고있습니다 셀버퍼창고 May 27, 2025 at 3:14 PM, duzzaman Md (MCS) : @FA Please check M0STK027_C01 there is CRANE fork left collapse detect 2 error.. Thank you ! May 27, 2025 at 3:14 PM, N.Gábor F.A. : Checking May 27, 2025 at 3:20 PM, N.Gábor F.A. : Solved May 27, 2025 at 4:32 PM, Szijjártó Balázs : No material is coming to Line 1, the warehouse panel is flashing yellow.Please help! May 27, 2025 at 4:36 PM, Sazzad Bhai SKon : Photo May 27, 2025 at 4:38 PM, duzzaman Md (MCS) : We see there is job. Vc04 is on the way May 27, 2025 at 5:10 PM, Éváné Bori Viktória : Helló! Eol AGV 15 move please May 27, 2025 at 5:13 PM, Muneeb Ur Rehman : Checking May 27, 2025 at 5:14 PM, Muneeb Ur Rehman : Done May 27, 2025 at 5:47 PM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 주임님 박스 해체기 투입 공팔레트 완제품 창고 투입할때 Side cover 측면에 붙어있는 비닐로인해 흡착시 계속 문제가 발생되고 있습니다. 비닐 제거후 투입이 필요합니다 May 27, 2025 at 6:17 PM, 배병민 (Bae Byoungmin) : 추가로 전일 입고된 R 타입 팔레트 Side cover 외관 상태가 너무 않좋습니다. 외관 상태 불량으로 흡착 오류 및 슬립발생으로 금일 주간에만 16개 수동으로 제거하며 설비 가동중입니다. 이수준이면 해체기 사용 불가합니다 May 27, 2025 at 6:18 PM, [민겸]MinGyum : 업체에 피드백하겠습니다. May 27, 2025 at 7:47 PM, Szabolcs : @FA M0CNV036_58_023 problem. Check please. Track No: 58023 May 27, 2025 at 7:47 PM, Döme György F.A : Jövök May 27, 2025 at 7:50 PM, 배병민 (Bae Byoungmin) : @Zoltán Harasztia FA Please check the section work data error M0CNV36_58_023. May 27, 2025 at 8:00 PM, Döme György F.A : I'm here May 27, 2025 at 8:13 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 남쪽 셀 도크장 GF 컨베이어 알람 발생하여 확이 부탁드립니다 South cell dock GF There is a conveyor alarm, so please check it. May 27, 2025 at 8:21 PM, 배병민 (Bae Byoungmin) : 조치됬습니다 May 27, 2025 at 8:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 May 27, 2025 at 9:17 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 남쪽 셀 도크장 GF 컨베이어 알람 발생하여 확이 부탁드립니다 South cell dock GF There is a conveyor alarm, so please check it. May 27, 2025 at 9:18 PM, SKOH2/제조-셀,모듈 출하/김병호 : 똑같은 장소에 중복으로 알람이 계석 발생합니다. May 27, 2025 at 9:18 PM, Zoltán Harasztia FA : Cheking May 27, 2025 at 9:21 PM, Zoltán Harasztia FA : Solved May 27, 2025 at 9:38 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Vákuum probléma May 27, 2025 at 9:38 PM, Sarvajcz Ferenc FA : Oke May 27, 2025 at 9:39 PM, Zoltán Harasztia FA : Megyek May 27, 2025 at 9:39 PM, R. József C SL EOL : Köszönöm May 27, 2025 at 9:44 PM, Döme György F.A : @MCS There is a pallet (Z300519) at port M0STK014_P07, but no AGV is coming for it, and I don't see any transport task in the ACS. Could you please check? Thank you! May 27, 2025 at 9:52 PM, VK (mcs) : Job created by OP action to the port 7 I will send it back to STK May 27, 2025 at 9:53 PM, Döme György F.A : Thank you very much for your help! May 27, 2025 at 10:24 PM, 최준영(JoonYoung Choi) : @mcs We request the deletion of the work of AGV#17 in front of the 4Line Cell Packing Out Convair. Reason: Manual switching during transfer from OUT C/V to AGV Pallet ID: T703895 After deleting the work, it will be manually unloaded by forklift. May 27, 2025 at 10:26 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @FACS team 늦은시간까지 현장 지원 감사합니다. 수고하셨습니다!! “Thank you for your support until late“ May 27, 2025 at 10:26 PM, VK (mcs) : Job cancelled May 27, 2025 at 10:27 PM, 배병민 (Bae Byoungmin) : 고생많으셨습니다 May 27, 2025 at 10:30 PM, 최준영(JoonYoung Choi) : Thank you! (최고) May 27, 2025 at 11:00 PM, R. József C SL EOL : Eol 5 sorral szemben out porton ferdén rakta ki a palettat May 27, 2025 at 11:01 PM, R. József C SL EOL : @Döme György F.A itt van May 27, 2025 at 11:03 PM, Döme György F.A : Kész.Már az AGV-n van. May 27, 2025 at 11:06 PM, R. József C SL EOL : K May 27, 2025 at 11:06 PM, R. József C SL EOL : Köszönöm May 28, 2025 at 1:24 AM May 28, 2025 at 1:24 AM, 배병민 (Bae Byoungmin) : @최준영(JoonYoung Choi) 유선상 확인 요청드린 부분으로 현재 박스 해체기 라이트 커튼 알람이후 재기동에 문제가되어 가동이 불가한거 같습니다. 야간 박스 포장기 수동자재 투입이 가능하다면 포장기만 가동 부탁드립니다. 해체기 가동을 계속 해야하는 상황이면 제가 준비해서 지금 현장으로 가겠습니다 May 28, 2025 at 1:34 AM, 최준영(JoonYoung Choi) : GF,1F,2F 확인 했지만 자재가 없습니다... 현장 방문 부탁 드리겠습니다ㅠ May 28, 2025 at 1:35 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 준비해서 가겠습니다. 조금 기다려주세요 감사합니다 May 28, 2025 at 1:39 AM, 최준영(JoonYoung Choi) : 감사합니다! May 28, 2025 at 3:39 AM, 배병민 (Bae Byoungmin) : 박스 해체기 정상 가동 시작되었습니다. 포장기도 가동 시작하겠습니다 May 28, 2025 at 3:44 AM, 배병민 (Bae Byoungmin) : 박스 포장기 박스 해체기 생산 시작되었습니다 May 28, 2025 at 3:45 AM, R. József C SL EOL : Thank you @배병민 (Bae Byoungmin) May 28, 2025 at 3:55 AM, 최준영(JoonYoung Choi) : 늦은 시간 도움 주셔서 감사합니다~! May 28, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 28, 2025 at 6:07 AM, Mohammad Amir : Good morning @Csepi Árpád @FA Please check M0STK013_P02 there is carrier Data Receive Timeout error and because of this one job is pending. Thank you very much! May 28, 2025 at 6:14 AM, Csepi Árpád : Good morning! I’m checking the error. May 28, 2025 at 6:23 AM, Csepi Árpád : Solved May 28, 2025 at 6:24 AM, Mohammad Amir : Köszönöm szepen! May 28, 2025 at 6:24 AM, Csepi Árpád : Szívesen! 🙂 May 28, 2025 at 6:55 AM, Mohammad Amir : @Brázik János @FA Please check M0STK014_P06/P02 there is Carrier Data Receive Timeout. Thank you! May 28, 2025 at 7:06 AM, Tklcz Alexandra SL/A : Sziasztok! Technikusi segítséget kérünk a boxpackingre: Pallets stopped before 2layers banding error May 28, 2025 at 7:18 AM, Tklcz Alexandra SL/A : Hi! I need technician boxpacking (2 layer banding) and unpacking (vac error). May 28, 2025 at 7:36 AM, Hethesi Tibor/TDSL/A invited Dull Máté. May 28, 2025 at 7:37 AM, Hethesi Tibor/TDSL/A : @Dull Máté . May 28, 2025 at 7:39 AM, 배병민 (Bae Byoungmin) : 삼구 담당자분 한분 박스포장기로 와주세요 May 28, 2025 at 8:09 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum @노영일 (Yeongil Noh) 박스 해체기 옆 외관 불량 Side cover 모아두고있고 NG 라고 라벨까지 붙쳐놓은 자재를 주간 근무자가 박스 포장기로 다시 투입하고 있습니다. 야간 작업자에게 설명하였는데 주간에 전달 안된거 같습니다. 투입 하면 안되는 자재라 재공지 부탁드립니다 May 28, 2025 at 8:10 AM, [민겸]MinGyum : 네. 전달하겠습니다. May 28, 2025 at 8:31 AM, FACS_JaewonShin : ■ 28th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 28, 2025 at 8:56 AM, Tklcz Alexandra SL/A : We need technician to boxpacking side cover. May 28, 2025 at 8:58 AM, 배병민 (Bae Byoungmin) : This is caused by the use of a defective side cover product. Please remove the side cover product. May 28, 2025 at 10:35 AM, 한상범(Han Sang Beom) : Please check AGV12 @FA May 28, 2025 at 10:35 AM, Muneeb Ur Rehman : Checking May 28, 2025 at 10:38 AM, Muneeb Ur Rehman : Fixed May 28, 2025 at 11:42 AM, 채효석(Hyoseok CHAE) : S파레트 라벨위치와 방향이 지속적으로 바뀌어 투입되고있어 5,6라인 애로사항이 많습니다 May 28, 2025 at 12:04 PM, Mohammad Amir : @FA @Brázik János Please check M0STK011_C01 it is OOS. Thank you very much! May 28, 2025 at 12:10 PM, FACS_Youngmin LEE : @Mohammad Amir solved May 28, 2025 at 1:16 PM, 배병민 (Bae Byoungmin) : 금일 아침 박스해체기 역투입 감지 센서 파손되어 일부 투입되었습니다. 조치는 바로 교체진행 되었습니다 May 28, 2025 at 1:17 PM, 윤성제(Yoon SungJe) : 안녕하세요 9,10라인 cell packing쪽 삼구인원 계실까요? May 28, 2025 at 1:18 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 안녕하십니까 PM님. 박스해체기 미진행 중 박스포장기 파레트 미투입 중 확인부탁드리겠습니다. May 28, 2025 at 1:24 PM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin @진재정 박스 해체기 생산 대응 부탁합니다 May 28, 2025 at 1:38 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 박스포장기로 출고 안잡히는 것도 확인 부탁드리겠습니다 May 28, 2025 at 3:03 PM, 한상범(Han Sang Beom) : Empty pallets are not being supplied to the 5Line Packing. Please check. @FA May 28, 2025 at 3:03 PM, Mohammad Amir : Checking May 28, 2025 at 3:04 PM, Mohammad Amir : For F5CPM010_P01, AGV#14 on the way with empty pallet ✅ Thank you very much! May 28, 2025 at 3:29 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 남쪽 셀 도크장 GF 컨베이어 알람 발생하여 확이 부탁드립니다 South cell dock GF There is a conveyor alarm, so please check it. May 28, 2025 at 3:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : 어제와 같은 동일 구역 알람발생입니다. May 28, 2025 at 3:30 PM, FACS_Hyeongi Son : 이동하겠습미다 May 28, 2025 at 3:36 PM, FACS_Hyeongi Son : 조치완료햤습미다 May 28, 2025 at 5:12 PM, 정낙정(JEONG NAK JEONG) : @fa gf 셀버퍼 4번창고 컨베이어 알람발생중입니다 May 28, 2025 at 5:18 PM, Csepi Árpád : 문제가 수정되었습니다! May 28, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.28. "B" műszak, 8+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Böröczki Balázs, Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián, --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin ------------- May 28, 2025 at 7:11 PM, Vadász Dóra SSL/B : Sziasztok Box packingon a kicsomagoló gép (vetkőztető) minden palettát megfordít! Azt is, aminek megfelelő az iránya! Tudnk ezzel kezdeni valamit? Sorállást okoz a termelésben a felpakolt rossz irányú paletta May 28, 2025 at 7:20 PM, Boromisza Zoltán : Megyünk May 28, 2025 at 7:29 PM, Szabolcs : @FA M0CNV036_M01 problem. Check please. May 28, 2025 at 7:35 PM, Gerbovits Kevin : Úton May 28, 2025 at 7:43 PM, Gerbovits Kevin : Solved May 28, 2025 at 8:08 PM, Nikolett SL/B EOL : Sziasztok #3 buffer Az AGV nem jól töltötte be a Palettát A paletta ferdén lett betöltve Valaki tudna jönni? Köszönöm May 28, 2025 at 8:36 PM, FA CS AGV David 데이비드 : @FA can someone please check this May 28, 2025 at 8:36 PM, Boromisza Zoltán : Okey May 28, 2025 at 8:37 PM, FA CS AGV David 데이비드 : Thanks May 28, 2025 at 8:44 PM, Boromisza Zoltán : Kész solved áll in May 28, 2025 at 8:45 PM, FA CS AGV David 데이비드 : Thanks May 28, 2025 at 8:46 PM, Kurkó Péter : Helló az egyes soron a block 1ről nem viszi el az agv az üres tálcákat valaki nézze meg köszi May 28, 2025 at 10:27 PM, 원승연(Seungyeon Won) : The empty pallet for Line 1 has not arrived. Please identify the cause. May 28, 2025 at 10:27 PM, 원승연(Seungyeon Won) : Formation EOL May 28, 2025 at 10:30 PM, VK (mcs) : LR received at 22:12 and T704050 was assigned from STK12. Currently carrier is in STK11 and on the way May 28, 2025 at 11:00 PM, 원승연(Seungyeon Won) : Thanks May 28, 2025 at 11:36 PM, Kurkó Péter : Hello line4en a felsőburkolat gantry megállt hibára valaki nézze meg köszi May 28, 2025 at 11:38 PM, Boromisza Zoltán : Valamikor érkezünk May 29, 2025 at 12:14 AM May 29, 2025 at 12:14 AM, Vadász Dóra SSL/B : Sziasztok! Box packingon a csomagoló oldalon felemeli a p&p az oldalborítást, szét is nyitja, de nem helyezi a palettára. Nézzétek meg kérlek May 29, 2025 at 12:14 AM, Boromisza Zoltán : Megyünk May 29, 2025 at 1:06 AM, Boromisza Zoltán : Kész May 29, 2025 at 2:18 AM, 원승연(Seungyeon Won) : 안녕하세요. 계속 팔레트 거꾸로 들어가서 이력 확인했는데, S000276 AGV 이력 확인 시 새벽 01:42에도 계속 박스해체기에서 방향 잘못되어서 버퍼창고로 투입됩니다. 전 라인 동일하며, 추가 확인 요청드립니다. @심정민 (Shim Jungmin) @배병민 (Bae Byoungmin) @김지현(Ji Hyun KIM) May 29, 2025 at 2:18 AM, 원승연(Seungyeon Won) : 29일 새벽 01:42이므로, 지속적으로 발생하고 있는 것으로 확인됩니다. May 29, 2025 at 3:43 AM, Nikolett SL/B EOL : Sziasztok 1 GF Buffer hibára áll ki valaki tudna jönni? Köszönöm May 29, 2025 at 3:45 AM, Boromisza Zoltán : Megyünk May 29, 2025 at 3:49 AM, Boromisza Zoltán : Kész May 29, 2025 at 4:10 AM, FA CS AGV David 데이비드 : @FA can someone please check the crane for STK 11. It's stuck but there's no alarm May 29, 2025 at 4:14 AM, Gerbovits Kevin : Going May 29, 2025 at 4:15 AM, FA CS AGV David 데이비드 : Thanks May 29, 2025 at 5:46 AM, 이재근(lee jae geun) : plz check AGV 16 May 29, 2025 at 5:46 AM, Muneeb Ur Rehman : EOL? May 29, 2025 at 5:46 AM, 이재근(lee jae geun) : yes May 29, 2025 at 5:47 AM, Muneeb Ur Rehman : Checking May 29, 2025 at 5:51 AM, Muneeb Ur Rehman : Fixed May 29, 2025 at 6:01 AM, 원승연(Seungyeon Won) : Buffer warehouse #1 It’s still not moving. May 29, 2025 at 6:03 AM, Tklcz Alexandra SL/A : Hi! EOL3 AGV12 error May 29, 2025 at 6:05 AM, Muneeb Ur Rehman : Checking May 29, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 29, 2025 at 6:07 AM, Muneeb Ur Rehman : Fixed May 29, 2025 at 6:31 AM, Tklcz Alexandra SL/A : Eol5 AGV12 error May 29, 2025 at 6:31 AM, Muneeb Ur Rehman : Checking May 29, 2025 at 6:31 AM, Tóth Gyula : Jó reggelt, Segítsetek légyszíves. Kértúnk ki modulokat az MOCNV033 M03-ra, de az M02-re jönnek ki amely beadó állomás. May 29, 2025 at 6:48 AM, Tóth Gyula : Gyertek lègyszíves. May 29, 2025 at 7:47 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님. 오늘 오전 9시30분에 박스해체기 교육 진행하시나요? 리더랑 오퍼레이터 준비하려고 합니다. May 29, 2025 at 7:49 AM, 배병민 (Bae Byoungmin) : 네 차주 금요일까지 동일 시간에 교육 계속 진행 계획입니다 May 29, 2025 at 8:01 AM, [민겸]MinGyum : 확인 감사합니다. May 29, 2025 at 8:04 AM, 채효석(Hyoseok CHAE) : This message was deleted. May 29, 2025 at 8:04 AM, 채효석(Hyoseok CHAE) : 안녕하세요. EOL 5 6LINE 계속 팔레트 거꾸로 들어오고 있는데, 박스해체기에선 방향 잘 맞게 들어가고있는지 확인요청드려요 @배병민 (Bae Byoungmin) May 29, 2025 at 8:15 AM, 배병민 (Bae Byoungmin) : 네 May 29, 2025 at 8:26 AM, KIM SEYEON [김세연]_FA : @🌌Lilla(한소라)🌠 씨 화성 박스해체기 9시반에 교육 통역지원 부탁드립니다. May 29, 2025 at 8:28 AM, FACS_JaewonShin : ■ 29th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 29, 2025 at 9:58 AM, Szentirmai Z. A/SSL : @Brázik János @Csepi Árpád Segítseget kérnék az 1-es pántolónál Köszi May 29, 2025 at 2:07 PM, 채효석(Hyoseok CHAE) : EOL 4,5,6라인 투입할 EMPTY파레트를 AGV가 정상가동하지 않는데 문제가 있는건가요? 확인해주세요 @[민겸]MinGyum May 29, 2025 at 2:07 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님 확인 요청드립니다. May 29, 2025 at 2:08 PM, FACS_Youngmin LEE : 확인해보겠습니다. May 29, 2025 at 2:10 PM, Duna Don : There’s no issue with the AGV @Mohammad Amir please check if there’s empty pallet? Thank you!! May 29, 2025 at 2:10 PM, Muneeb Ur Rehman : Yes there is no agv issue. There is MCS issue. May 29, 2025 at 2:10 PM, Mohammad Amir : Sure , checking. Thank you very much! May 29, 2025 at 2:10 PM, Muneeb Ur Rehman : There is no command for empty pallets May 29, 2025 at 2:13 PM, Botos Viki (빅토리아) : 모듈 1라인 LWR case Loading 시 이상 발생하여 확인 필요할 것 같습니다. P-box가 파손되었고 로봇 arm 제데로 clamp되지 않은 상황입니다. May 29, 2025 at 2:16 PM, Mohammad Amir : Hello, Please press LR for E0L-5 &6 , currently there is no job for these line. There is currently 51 empty pallet available for EOL 5&6 and 1195 for EOL-4. For EOL-4 Empty pallet RBA2853 on the way ,it is currently in queue. I am monitoring. Thank you very much! May 29, 2025 at 2:16 PM, Mohammad Amir : Dear @Duna Don Bhai, For you information! May 29, 2025 at 2:17 PM, FACS_Youngmin LEE : AGV는 문제 없으며 상위에서 ACS에 내리는 잡이 많이 없는 상태입니다. May 29, 2025 at 2:47 PM, Tklcz Alexandra SL/A : EOL9 AGV18 in buffer waiting. It does not load the palette and there is another one waiting in front of him. May 29, 2025 at 2:48 PM, Tklcz Alexandra SL/A : Kérlek nézzetek rá, nem az AGV.vel van probléma. @Csepi Árpád May 29, 2025 at 2:53 PM, Mohammad Amir : Update :- There was an issue that's why Job for Empty Pallet not arriving in 5&6 line. Now I have resolved the issue ✅. And empty pallet in the way. I am monitoring. Thank you very much! May 29, 2025 at 2:53 PM, Mohammad Amir : Dear @Duna Don Bhai, For your information. Thank you very much! May 29, 2025 at 3:25 PM, Mohammad Amir : @All For your information, Now empty pallet delivery to EOL 4&5&6 has been completely normalized ✅. Thank you very much! May 29, 2025 at 3:28 PM, 채효석(Hyoseok CHAE) : Thank you very much May 29, 2025 at 3:28 PM, Mohammad Amir : You are most welcome. May 29, 2025 at 5:40 PM, 유경호(RYU KYEONGHO) : @mcs Job for M0STK014 is not created. May 29, 2025 at 5:41 PM, Mohammad Amir : Checking May 29, 2025 at 5:43 PM, 원승연(Seungyeon Won) : Buffer warehouse #1 check plz May 29, 2025 at 5:44 PM, Mohammad Amir : As I checked currently there is one job for is R200032 which has destination MSTK014_Z01 has started to move now ✅. Please let me know if you have further questions. Thank you very much! May 29, 2025 at 5:45 PM, Szabolcs : @FA M0CNV036 lift problem. Check please. May 29, 2025 at 5:47 PM, 정낙정(JEONG NAK JEONG) : @fa 4번창고 1단 10열 8행 랙 확인부탁드립니다. 언노운으로 R200084파레트 있는 것으로 확인되는데 해당파레트 지금 GF버퍼에 나와 있는 상태라 입고시 에러 발생하고 있습니다. May 29, 2025 at 5:48 PM, FACS_Hyeongi Son : 넵 확인하겠습미다 May 29, 2025 at 5:59 PM, FACS_Hyeongi Son : 랙장 실물 확인 후 조치 하였습니다 May 29, 2025 at 6:01 PM, 정낙정(JEONG NAK JEONG) : 감사합니다 May 29, 2025 at 6:05 PM, 원승연(Seungyeon Won) : 버퍼창고 #1 30분이상 멈춰있는데 확인해주실 수 있을까요? CV DATA MISMATCH 발생했습니다 May 29, 2025 at 6:09 PM, KIM SEYEON [김세연]_FA : @FACS_Hyeongi Son 야간에 계신분이 봐주실수 있을까요? May 29, 2025 at 6:09 PM, FACS_TaehyeongJin : 조치중입니다 May 29, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.29. "B" műszak, 9+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Böröczki Balázs --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(1): 김지수 May 29, 2025 at 6:09 PM, Mohammad Amir : @FA Please check M0STK012_P09 there is Carrier Data received timeout error still. Some tasks are pending due to it. Thank you very much! May 29, 2025 at 6:10 PM, FACS_Hyeongi Son : Oh Yeah we just call forklift It will be taken soon May 29, 2025 at 6:11 PM, Mohammad Amir : Please also check M0STK011_P12 there is C/V data miss match nothing error. Thank you very much! May 29, 2025 at 6:11 PM, Mohammad Amir : Thank you very much for the confirmation. May 29, 2025 at 6:15 PM, 심정민 (Shim Jungmin) : @배병민 (Bae Byoungmin) Rack to Rack C/V에서 같은 내용으로 알람이 자주 발생하는데, 근본적인 조치가 필요할 것 같습니다. 이로인해 박스 포장 지연이 잦은 상황이니 바쁘시겠지만 확인 부탁드립니다. 혹여 잘못된 오퍼레이팅으로 해당 문제가 야기되는 경우가 있다면 내용 공유 부탁드립니다. May 29, 2025 at 6:42 PM, Boromisza Zoltán : Megyünk May 29, 2025 at 6:44 PM, Boromisza Zoltán : Kész May 29, 2025 at 7:06 PM, FACS_TaehyeongJin : @mcs STK12 현재 잡이 잘못 생성되고 있던것 같습니다 확인부탁합니다 May 29, 2025 at 7:07 PM, Shakir (MCS) : Please provide me carrier id Thank you May 29, 2025 at 7:08 PM, FACS_TaehyeongJin : Carrier id T704833 May 29, 2025 at 7:11 PM, Shakir (MCS) : For this carrier destination is M1MFA300_P03 May 29, 2025 at 7:11 PM, FA CS AGV David 데이비드 : @FA can someone please check STK12_ p09. The port seems oos May 29, 2025 at 7:12 PM, FACS_Hyeongi Son : Oki going May 29, 2025 at 7:14 PM, FA CS AGV David 데이비드 : Thank you May 29, 2025 at 8:27 PM, Szabolcs : @FA M0CNV036_58_023 problem. Check please. May 29, 2025 at 8:28 PM, FACS_Hyeongi Son : Going May 29, 2025 at 9:00 PM, Kurkó Péter : Hello 3line block 1 kitöltésnél megállt a 6os agv valaki nézze meg köszi May 29, 2025 at 9:01 PM, FA CS AGV David 데이비드 : Coming May 29, 2025 at 9:03 PM, FA CS AGV David 데이비드 : Solved May 29, 2025 at 10:18 PM, 이재근(lee jae geun) : plz check eol AGV9 May 29, 2025 at 10:18 PM, FA CS AGV David 데이비드 : Coming May 29, 2025 at 10:19 PM, 이재근(lee jae geun) : solve May 29, 2025 at 10:19 PM, 이재근(lee jae geun) : plz Don't come May 29, 2025 at 10:20 PM, FA CS AGV David 데이비드 : Okay May 29, 2025 at 10:32 PM, 원승연(Seungyeon Won) : Box packing에서 MES 0019 에러가 자주 발생합니다. MES 로그 확인 시 설비에서 BpmPalletInCompleteReport를 누락하는 것으로 확인됩니다. 이 문제로 설비에서 계속 팔레트를 수동으로 취출해야하므로 작업이 지연됩니다. 프로그램 확인해주시면 감사하겠습니다. @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) May 29, 2025 at 10:35 PM, 배병민 (Bae Byoungmin) : @FACS_TaehyeongJin 어떤 상황인지 확인좀 해주세요 May 29, 2025 at 10:36 PM, 원승연(Seungyeon Won) : 현장 오시고 연락주시면 설명드리겠습니다 May 29, 2025 at 10:38 PM, 배병민 (Bae Byoungmin) : 현장에 저희 CS 분들 계십니다 @FACS_TaehyeongJin 대응 부탁합니다 May 29, 2025 at 10:38 PM, FACS_Hyeongi Son : 지금 패킹기에서 확인 중입니다 May 29, 2025 at 10:41 PM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) MES Validation 은 확인 해보신거죠? May 29, 2025 at 10:47 PM, 원승연(Seungyeon Won) : 네 BpmPalletValidationRequest 성공 이후, 박스포장기로 투입되었으며, 작업자 확인하는 위치에서 MES에러 발생합니다 May 29, 2025 at 10:49 PM, 배병민 (Bae Byoungmin) : @김성식 PM님 저녁 늦게 죄송합니다. MES 0019 에러 코드 발생부분 어떤 경우인지 확인 가능하실까요? May 29, 2025 at 10:53 PM, 준용 : 해당에러 투입보고 누락시 이후 프로세스 공정에서 투입보고 누락으로 인한 validation 에러 입니다 pm님 May 29, 2025 at 10:54 PM, 준용 : 이상황에 의한 에러가 맞습니다 May 29, 2025 at 10:57 PM, 배병민 (Bae Byoungmin) : 설비 투입에서 MES와 설비에서 서로 투입 보고하고 누락되었을경우 해당구간에서 나크쳐서 진행이 불가한거죠? May 29, 2025 at 10:59 PM, 준용 : 설비 투입보고는 설비쪽에서 올리는 메세지고 서로 투입보고 누락은 어떤걸 말씀하시는지 잘 모르겟습니다 May 29, 2025 at 11:10 PM, 배병민 (Bae Byoungmin) : 설비 투입 보고 누락부분은 확인 해보겠습니다. 감사합니다. May 30, 2025 at 12:32 AM May 30, 2025 at 12:32 AM, FA CS AGV David 데이비드 : @FA can someone please check STK 11 P06. The crane looks stuck but there's no alarm May 30, 2025 at 12:34 AM, Boromisza Zoltán : Okey May 30, 2025 at 12:35 AM, FA CS AGV David 데이비드 : Thank you May 30, 2025 at 12:39 AM, Boromisza Zoltán : Solved May 30, 2025 at 12:40 AM, FA CS AGV David 데이비드 : Thank you May 30, 2025 at 1:46 AM, FA CS AGV David 데이비드 : @FA can someone please check STK12_P09. There's a light curtain detect error May 30, 2025 at 1:46 AM, Boromisza Zoltán : Boeing 😆😆 May 30, 2025 at 1:47 AM, FA CS AGV David 데이비드 : Thanks May 30, 2025 at 1:51 AM, Boromisza Zoltán : Solved May 30, 2025 at 1:51 AM, FA CS AGV David 데이비드 : Thank you May 30, 2025 at 3:03 AM, Vadász Dóra SSL/B : Sziasztok Nézzetek rá a boxra kérlek. Pontosan most nem tudok mondani, mivel állunk szemben. Köszönöm May 30, 2025 at 3:04 AM, Gerbovits Kevin : Megyünk May 30, 2025 at 3:07 AM, 원승연(Seungyeon Won) : Box packing problem, plz help @FA technician May 30, 2025 at 3:10 AM, KIM SEYEON [김세연]_FA invited 조수형팀장 SKO/FA운영팀. May 30, 2025 at 3:11 AM, KIM SEYEON [김세연]_FA : @Boromisza Zoltán @Gerbovits Kevin FA technicians please check box packing mc. what is the error name? May 30, 2025 at 3:12 AM, Gerbovits Kevin : Work detect error May 30, 2025 at 3:14 AM, KIM SEYEON [김세연]_FA : thanks May 30, 2025 at 3:15 AM, KIM SEYEON [김세연]_FA : could you reset it? May 30, 2025 at 3:15 AM, Gerbovits Kevin : let's do it now May 30, 2025 at 3:18 AM, KIM SEYEON [김세연]_FA : thanks May 30, 2025 at 4:42 AM, Boromisza Zoltán : A csomagoló gép működik kész A ki csomagoló géppel nem tudok mit kezdeni semmilyen oktatást nem kaptunk az első részt megtudtuk csinálni a többinél el ment a szervo PLC szakértő kell hozzá biztosan majd jönnek May 30, 2025 at 4:43 AM, Boromisza Zoltán : @Szücs Géza FT-B a feladat túl nőtt rajtunk segítség kell a box packingra May 30, 2025 at 4:54 AM, Szücs Géza FT-B : oké, kösszi May 30, 2025 at 4:55 AM, Szücs Géza FT-B : ez s hiba áll még fent? May 30, 2025 at 5:01 AM, Gerbovits Kevin : Nem May 30, 2025 at 5:02 AM, Gerbovits Kevin : Pontos megnevezés: SC Lift Z2SERVO ERROR May 30, 2025 at 5:27 AM, Szücs Géza FT-B : kössz May 30, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (2): Martina Dávid, Kiss Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 30, 2025 at 6:18 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.30 Time:06:00~18:00 Jeong woojun May 30, 2025 at 6:19 AM, Kiss András SSL “D” : Sziasztok FA ! A Boxpackingra kérnék segítséget. A kicsomagoló oldalon servo hiba jelentkezett. Áll a sor. Várunk benneteket. Köszi ! May 30, 2025 at 6:21 AM, N.Gábor F.A. : Szia Itt vagyunk már orvosoljuk May 30, 2025 at 6:22 AM, Őri Imre : Jó reggelt! May 30, 2025 at 6:23 AM, Őri Imre : 3-4 sor között a kis AGV-k hibában állnak. Valaki meg tudná nézni? May 30, 2025 at 6:23 AM, Őri Imre : Köszönöm! May 30, 2025 at 6:23 AM, FA-CS-AGV-Masoud : Coming May 30, 2025 at 6:25 AM, FA-CS-AGV-Masoud : Solved May 30, 2025 at 6:28 AM, N.Gábor F.A. : Kész May 30, 2025 at 6:29 AM, Kiss András SSL “D” : Perfect ! May 30, 2025 at 8:11 AM, FACS_JaewonShin : ■ 30th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 1 Jin jaejeong May 30, 2025 at 8:13 AM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 박스해체기 06:45 이후 진행이 안되는 듯 합니다. 확인 가능하신지요 May 30, 2025 at 8:15 AM, FACS_JaewonShin : 현장으로 facs인원 보내겠습니다 May 30, 2025 at 8:22 AM, Szijjártó Balázs : I would like some help on Module Line 1. LWR case gantry has made the same issue several times. May 30, 2025 at 8:23 AM, FACS_Youngmin LEE : Z타입 파레트가 29단이 정상이지만 28단이 배출되어 높이센서 알람 띄운 상황입니다. May 30, 2025 at 2:23 PM, 배병민 (Bae Byoungmin) : @정낙정(JEONG NAK JEONG) 박스포장기 R>S로 바뀌면서 S팔레트 정보가 안올라오고 있습니다 현장서 확인 가능하실까요? May 30, 2025 at 5:55 PM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum 셀버퍼 2번창고 수동 포트로 투입 잠시 중단 부탁드립니다. 잡이 너무 밀려있습니다 May 30, 2025 at 6:02 PM, 원승연(Seungyeon Won) : 1,2 투입 정지 3,4 투입 시작 했습니다 May 30, 2025 at 6:03 PM, 배병민 (Bae Byoungmin) : 네 감사합니다 May 30, 2025 at 6:12 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.30 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 30, 2025 at 6:22 PM, FACS_Hyeongi Son : @MCS Hello Can you move this product? T702140 M0STK014_M02_OP01 ->M0STK014_0201207 May 30, 2025 at 6:33 PM, Shakir (MCS) : This message was deleted. May 30, 2025 at 6:34 PM, Shakir (MCS) : I created job but it show alternated, Hcack10. May 30, 2025 at 6:34 PM, FACS_Hyeongi Son : Okiiii I'll try to solve it here May 30, 2025 at 6:43 PM, Reisz Tibor : End plate loading is not happening on line 3. I would like help. May 30, 2025 at 6:44 PM, Sarvajcz Ferenc FA : Ez, az ahol az előbb néztuk? May 30, 2025 at 6:51 PM, Balázs Róbert SL : LF#1-OP#1 ALARM May 30, 2025 at 6:52 PM, Sarvajcz Ferenc FA : Melo van,igyekszem.. May 30, 2025 at 7:01 PM, FACS_Hyeongi Son : It's working normally right now Please wait until the raw material comes and works May 30, 2025 at 7:03 PM, Reisz Tibor : I just didn't understand why he didn't transfer the one in the buffer port and had to wait for another one to come from the warehouse. May 30, 2025 at 7:36 PM, Szabolcs : @FA M0CNV036_58_023 problem. Check please. May 30, 2025 at 7:37 PM, Sarvajcz Ferenc FA : Igyekszem.. May 30, 2025 at 7:45 PM, Sarvajcz Ferenc FA : Kész. May 30, 2025 at 9:00 PM, Sási Zsolt SL/C/ EOL : 15os AGV 4es sor kimenetén hibával áll. Kérlek nézzétek meg May 30, 2025 at 9:02 PM, FA CS AGV David 데이비드 : Solved May 30, 2025 at 9:08 PM, Sási Zsolt SL/C/ EOL : Thank you May 30, 2025 at 9:48 PM, 원승연(Seungyeon Won) : Box packing MES 0019 발생하였습니다. 우선 가동을 위해 수동 배출 진행하겠습니다. May 30, 2025 at 11:13 PM, Balázs Róbert SL : Kis agv 1es-2es sor között megállt. Nézzétek meg légyszíves May 30, 2025 at 11:13 PM, Sarvajcz Ferenc FA : Ok..megyek.. May 30, 2025 at 11:26 PM, FA CS AGV David 데이비드 : Solved May 30, 2025 at 11:34 PM, R. József C SL EOL : Boxpacking felé útban vannak az agvk Kérlek küldjétek el May 30, 2025 at 11:34 PM, Sarvajcz Ferenc FA : Pillanat m3lo van.. May 31, 2025 at 12:50 AM May 31, 2025 at 12:50 AM, R. József C SL EOL : kérlek nézzétek meg miért nem jön anyag Boxpackingra. köszönöm please check why there is no material coming to Boxpacking. thank you May 31, 2025 at 12:54 AM, Shakir (MCS) : Job exists but AGV04 consistently on alarm. It delay the supply. @ACS please check Thank you May 31, 2025 at 12:55 AM, FA CS AGV David 데이비드 : Checking May 31, 2025 at 12:56 AM, Sarvajcz Ferenc FA : En még a Transzferen vagyok,nem tudok menni..szerelünk..fontos.. May 31, 2025 at 12:57 AM, Sarvajcz Ferenc FA : David besegít... May 31, 2025 at 12:57 AM, R. József C SL EOL : Oksa May 31, 2025 at 1:08 AM, FA CS AGV David 데이비드 : AgV response is OK, port is in service but it constantly shows a PIO Unloading error. PIO sensors have been checked and they're ok May 31, 2025 at 1:44 AM, Reisz Tibor : Line3 endplate ganrty help May 31, 2025 at 1:49 AM, Shakir (MCS) : Now, the issue has been resolved, AGV07 on the way to Boxpacking Thank you May 31, 2025 at 1:52 AM, R. József C SL EOL : Thank you May 31, 2025 at 1:57 AM, Sarvajcz Ferenc FA : @Shakir (MCS) hi.. May 31, 2025 at 2:26 AM, Herceg Sándor SSL/C : Sziasztok! Boxpackingre rátudtok nézni? El voltak csúszva az oldalborítasok. Meg lett igazítva,de szerintem a safety relé leoldott. May 31, 2025 at 2:28 AM, Sarvajcz Ferenc FA : En most nem ott vagyok.. May 31, 2025 at 2:29 AM, Sarvajcz Ferenc FA : En kesőbb.. May 31, 2025 at 2:32 AM, Herceg Sándor SSL/C : Bocs. Megoldva! May 31, 2025 at 2:34 AM, R. József C SL EOL : Kész, hasít May 31, 2025 at 3:13 AM, 원승연(Seungyeon Won) invited Alexa 알렉사. May 31, 2025 at 4:01 AM, R. József C SL EOL : Nézzétek meg kérlek a boxpackingot May 31, 2025 at 4:02 AM, Sarvajcz Ferenc FA : ..igyekszem.. May 31, 2025 at 4:04 AM, R. József C SL EOL : Köszönöm May 31, 2025 at 4:31 AM, FA CS AGV David 데이비드 : @FA the crane for stk 11 is stuck. Please check May 31, 2025 at 4:32 AM, Sarvajcz Ferenc FA : Ok.. May 31, 2025 at 5:03 AM, R. József C SL EOL : Buffert nézzétek. Meg kérlek Nem jön Paletta 9-10 sorokra May 31, 2025 at 5:03 AM, Sarvajcz Ferenc FA : Nem tudom őket inditani. May 31, 2025 at 5:03 AM, Sarvajcz Ferenc FA : Passz.. May 31, 2025 at 5:04 AM, Sarvajcz Ferenc FA : Se kép,se hang..még én se. May 31, 2025 at 5:08 AM, 원승연(Seungyeon Won) : Plz check buffer warehouse 2 May 31, 2025 at 5:16 AM, 원승연(Seungyeon Won) : 버퍼 창고 2번 너무 오래멈춰있어서 지연되고 있습니다. 혹시 지원가능할까요? May 31, 2025 at 5:22 AM, Sarvajcz Ferenc FA : Nem indul. Igen, kell segitseg. May 31, 2025 at 5:23 AM, Sarvajcz Ferenc FA : @Shakir (MCS) m0stk 12 can you help me? May 31, 2025 at 5:28 AM, Shakir (MCS) : M0STK012 : There is C/V Data miss match exist error. May 31, 2025 at 5:29 AM, Shakir (MCS) : On M0STK012_P05 port Thank you May 31, 2025 at 5:29 AM, Sarvajcz Ferenc FA : Szar az egész May 31, 2025 at 5:30 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek 2Line cell paking bemenetéhez. 16os AGV áll hibával May 31, 2025 at 5:31 AM, Sarvajcz Ferenc FA : David? May 31, 2025 at 5:31 AM, FA CS AGV David 데이비드 : Going May 31, 2025 at 5:38 AM, Sarvajcz Ferenc FA : Nyekereg itt minden, ami hangon létezik.. May 31, 2025 at 5:41 AM, Sarvajcz Ferenc FA : 1 es ,es 2 es cell buffer nem megy. Nem tudok tovabblepni. Tudjatok rola. May 31, 2025 at 5:54 AM, Kiss András SSL “D” : Sziasztok FA. ! Az EOL termelés akadályozva van ! A Bufferbe se ki, se be nem megy a PLT-k raktározása. Várunk benneteket ! Köszönöm ! May 31, 2025 at 5:56 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 31, 2025 at 6:11 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check port M0STK011_P06 May 31, 2025 at 6:13 AM, N.Gábor F.A. : Just a moment May 31, 2025 at 7:05 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.31 Time:06:00~18:00 Jeong woojun May 31, 2025 at 8:26 AM, Őri Imre : Jo reggelt! May 31, 2025 at 8:27 AM, Őri Imre : Sajnos a 3as sorra nem érkezett BMA! Már lassan 1 órája meg lett kérve! Le fog állni a termelés! Nézetek utána légyszíves! May 31, 2025 at 8:29 AM, N.Gábor F.A. : Intézem már May 31, 2025 at 8:32 AM, Mohammad Amir : @N.Gábor F.A. Could you please check M0STK026_C01 it is inactive without error that's why created job for materials transfer is getting delayed. This is the core Reason for delay. Thank you very much! May 31, 2025 at 8:36 AM, N.Gábor F.A. : Sure Checking May 31, 2025 at 8:38 AM, N.Gábor F.A. : Solved Materials are moving May 31, 2025 at 8:38 AM, Mohammad Amir : Thank you very much! May 31, 2025 at 8:41 AM, KIM SEYEON [김세연]_FA : 👍 May 31, 2025 at 9:21 AM, Tklcz Alexandra SL/A : EOL9 AGV 12 error. Please check. May 31, 2025 at 9:21 AM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 9:23 AM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 9:47 AM, Kiss András SSL “D” : Tisztelt FA ! A Boxpacking PLT kicsomagolónál az oldalfal leszedésnél akadt problémánk. Kérlek foglalkozzatok a hiba megszűntetésével ! Köszönöm ! May 31, 2025 at 10:06 AM, Mohammad Amir : @FA Please check M0STK011_C01 there is Crane Fork Right over run detect error and it is causing several jobs to be delayed. Thank you very much! May 31, 2025 at 10:17 AM, N.Gábor F.A. : Checking May 31, 2025 at 10:18 AM, Kiss András SSL “D” : Tisztelt FA ! A Buffer 1-nél fénykapu hiba miatt nem történik PLT mozgatás. Emiatt kérném a segítségeteket. Köszönöm ! May 31, 2025 at 10:18 AM, N.Gábor F.A. : Megyek May 31, 2025 at 10:20 AM, 요셉 : Eol agv 14 check plz May 31, 2025 at 10:20 AM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 10:49 AM, 요셉 : Eol Agv 12 check plz May 31, 2025 at 10:52 AM, Kiss András SSL “D” : FA ! A Boxpackingon a köztes PLT ellenőrző állomásról nem lehetséges a PLT továbbküldése a folyamatban. Kérlek gyertek a helyszínre ! Köszönöm ! May 31, 2025 at 11:23 AM, N.Gábor F.A. : Orvosolva May 31, 2025 at 11:26 AM, Tklcz Alexandra SL/A : EOL4 AGV13 error. May 31, 2025 at 11:27 AM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 11:29 AM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 11:31 AM, 최준영(JoonYoung Choi) : EmptyPallet is not coming with EOL 6Line. I checked SCS and there are pallets in Buffer Warehouse Line 2 that have not been shipped since 7:00 AM today. Please check. Pallet ID: Z100628, S000529 May 31, 2025 at 11:33 AM, Mohammad Amir : Checking May 31, 2025 at 11:42 AM, Mohammad Amir : @FA @N.Gábor F.A. Please check S000519 it has job to go to EOL-6 but is not moving for while , current location is M0STK012(0201806). Also please check S000529 located at M0STK012(0100503),it has job to go to EOL-5. Everything is good from MCS RTD side ✅. Please check physically these carriers ,there are in Queue state for a long time. Thank you very much! May 31, 2025 at 11:49 AM, N.Gábor F.A. : Checking May 31, 2025 at 11:52 AM, N.Gábor F.A. : This storage Currently hase many jobs May 31, 2025 at 11:54 AM, 최준영(JoonYoung Choi) : Even when there wasn't much work, it didn't come out. May 31, 2025 at 11:54 AM, Kiss András SSL “D” : Tisztelt FA ! A Boxpacking PLT kicsomagolónál az oldalfal leszedésnél ismételten akadt problémánk. Kérlek nézzetek rá újra a masinára. Köszönöm ! May 31, 2025 at 11:56 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check with fa technicians whether material problem? or machine problems? May 31, 2025 at 11:56 AM, Dániel Hufnágel : As soon as we finish at powder area i will go there May 31, 2025 at 11:57 AM, KIM SEYEON [김세연]_FA : if material is not proper to input box mc cannot do it May 31, 2025 at 12:00 PM, 최준영(JoonYoung Choi) : If the pallet is in place and there are no problems, please delete the work order. May 31, 2025 at 12:01 PM, Mohammad Amir : It is pending for quite a long time even jobs before these jobs has been completed. Please investigate,it is pending for more than 4 hours. Thank you very much! May 31, 2025 at 12:02 PM, N.Gábor F.A. : I can't see jobs in scs May 31, 2025 at 12:03 PM, Mohammad Amir : I have cancelled the command as requested ✅. Thank you very much! May 31, 2025 at 12:03 PM, Mohammad Amir : Could you please Press LR again for EOL -5 and EOL-6. Thank you very much! May 31, 2025 at 12:04 PM, Mohammad Amir : On the request of operations I have cancelled the job as empty pallet delivery to EOL-5&6 was getting delayed. Thank you very much! May 31, 2025 at 12:08 PM, Mohammad Amir : This message was deleted. May 31, 2025 at 12:09 PM, N.Gábor F.A. : Thank you May 31, 2025 at 12:09 PM, Mohammad Amir : Please press LR again for EOL-5 &6 ,if you would like to receive Empty pallets. We need LR. Thank you very much! May 31, 2025 at 12:09 PM, Mohammad Amir : You are welcome! May 31, 2025 at 12:10 PM, 최준영(JoonYoung Choi) : Thank you~! May 31, 2025 at 12:11 PM, Mohammad Amir : You are welcome! May 31, 2025 at 12:32 PM, Mohammad Amir : For your information:- LR received successfully for EOL-6 at 12:26 and now S000519 on the way on AGV#10 ✅. And For EOL-5 ,LR received at 12:31,S000512 on the way. ✅ I am monitoring. Thank you very much! May 31, 2025 at 12:50 PM, Kiss András SSL “D” : Sziasztok ! Az AGV 14 hibával áll a Buffer előtt. Kérek hozzá segítséget ! Köszönöm ! May 31, 2025 at 12:53 PM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 12:55 PM, Kiss András SSL “D” : FA ! A Boxpacking 1-és pántolószalag forrasztási nem hajtja végre. Kérném segítsetek a hiba megszűntetésében. Köszönöm ! May 31, 2025 at 12:57 PM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 1:10 PM, Őri Imre : @N.Gábor F.A. nem hozza az end plate palettát! Meg tudod nézni nekünk! Köszönöm May 31, 2025 at 1:10 PM, Mohammad Amir : Please tell me which line ,I will check. Thank you very much! May 31, 2025 at 1:12 PM, Szijjártó Balázs : Module Line 4 May 31, 2025 at 1:15 PM, Mohammad Amir : Please confirm port id as well. Thank you very much! May 31, 2025 at 1:18 PM, N.Gábor F.A. : M4MFA300_P26 the port May 31, 2025 at 1:19 PM, Mohammad Amir : Thank you very much! May 31, 2025 at 1:19 PM, N.Gábor F.A. : Your welcome May 31, 2025 at 1:19 PM, N.Gábor F.A. : Mondanám, hogy jó de sose az, átmenetileg működik 🫡 May 31, 2025 at 1:22 PM, Mohammad Amir : Please press LR for M4MFA300_P26. Thank you very much! May 31, 2025 at 1:23 PM, N.Gábor F.A. : Done May 31, 2025 at 1:24 PM, Mohammad Amir : Please press again ,we didn't receive it yet. Thank you very much! May 31, 2025 at 1:26 PM, N.Gábor F.A. : I oressed again May 31, 2025 at 1:26 PM, N.Gábor F.A. : Pressed* May 31, 2025 at 1:27 PM, Mohammad Amir : @N.Gábor F.A. Could you please press UR again for M4MFA300_P27 ,last job was cancelled by operator at 11:46. Thank you very much! May 31, 2025 at 1:27 PM, Mohammad Amir : Checking May 31, 2025 at 1:28 PM, Mohammad Amir : Unfortunately still not received. Thank you very much! May 31, 2025 at 1:53 PM, Őri Imre : AGV 14 a sor végén kiadagolas közben megált May 31, 2025 at 1:53 PM, Őri Imre : Meg tudnátok nézni? May 31, 2025 at 1:53 PM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 1:58 PM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 2:39 PM, Őri Imre : @N.Gábor F.A. tudnál jönni ide a 4es sorra. Másik teli paletta end platet kell bérelni! May 31, 2025 at 2:40 PM, Őri Imre : Betenni. Bocs May 31, 2025 at 2:50 PM, N.Gábor F.A. : Megyek May 31, 2025 at 3:04 PM, 최준영(JoonYoung Choi) : Unpacking Side cover disassembler alignment is off. Please check. May 31, 2025 at 3:08 PM, Mohammad Amir : @FA Please check M0STK012_P09 there is C/V light curtain detect error. One job is pending. Thank you very much! May 31, 2025 at 3:23 PM, Szijjártó Balázs : Kelletek a Line4 endplate-hez.Folyamatosan Vision correction error van, hiába igazítgatjuk a ládákat. May 31, 2025 at 3:23 PM, N.Gábor F.A. : Oké May 31, 2025 at 3:35 PM, N.Gábor F.A. : Solved May 31, 2025 at 3:35 PM, Mohammad Amir : Thank you very much! May 31, 2025 at 3:51 PM, Őri Imre : 1,5 órája lett BMA kérve a 3 sor P28 as portba de még nem érkezett meg! Kezd kifogyni May 31, 2025 at 3:52 PM, N.Gábor F.A. : @Mohammad Amir Can you check why don't arrive material to M3MFA300_P28? May 31, 2025 at 3:53 PM, Mohammad Amir : Checking May 31, 2025 at 3:53 PM, N.Gábor F.A. : Thank you May 31, 2025 at 3:53 PM, Mohammad Amir : You are welcome! May 31, 2025 at 3:55 PM, Tklcz Alexandra SL/A : Hi! AGV9 error, 1 buffer. Near EOL9. May 31, 2025 at 3:56 PM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 3:56 PM, Mohammad Amir : I have resolved the issue ✅. Carrier has started to move to it's destination M3MFA300_P28. I am monitoring for smooth delivery. Thank you very much! May 31, 2025 at 3:58 PM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 4:01 PM, Őri Imre : Thx! May 31, 2025 at 4:14 PM, Mohammad Amir : @N.Gábor F.A. @Őri Imre Update :- BMA has successfully arrived at Module Line-3 P28 at 16:14. Feel free to contact me if you face any further issues. Thank you very much! May 31, 2025 at 5:33 PM, Tklcz Alexandra SL/A : Same error, same place, but AGV16.😅 May 31, 2025 at 5:33 PM, FA-CS-AGV-Masoud : Coming May 31, 2025 at 5:34 PM, FA-CS-AGV-Masoud : Solved May 31, 2025 at 5:44 PM, Tklcz Alexandra SL/A : AGV10 error, 1 buffer, near EOL9 May 31, 2025 at 5:51 PM, FA/CS/AGV/Taimur : Solved. Thank you May 31, 2025 at 6:02 PM, R. József C SL EOL : Gyertek kérlek boxpackingra 4 oldalas nyomtatónál kellene alaphelyzetbe állítani a cv-t hogy jó pozícióba álljon May 31, 2025 at 6:02 PM, Zoltán Harasztia FA : Mindjárt ott vagyok May 31, 2025 at 6:13 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.31 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 31, 2025 at 6:20 PM, Reisz Tibor : Line4 upper & lower case gantry help please! May 31, 2025 at 6:32 PM, Zoltán Harasztia FA : Úton May 31, 2025 at 8:23 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek 5 Cellpacking hoz. 8as AGV áll May 31, 2025 at 8:23 PM, Sarvajcz Ferenc FA : Ok May 31, 2025 at 8:25 PM, Sási Zsolt SL/C/ EOL : Kész May 31, 2025 at 11:15 PM, 원승연(Seungyeon Won) : This message was deleted. May 31, 2025 at 11:39 PM, R. József C SL EOL : Buffer1 Crc2 c/v#01 carrier data receive timeout May 31, 2025 at 11:39 PM, R. József C SL EOL : Kérlek nézzétek meg May 31, 2025 at 11:39 PM, Zoltán Harasztia FA : Nézzük May 31, 2025 at 11:39 PM, R. József C SL EOL : Köszönöm May 31, 2025 at 11:42 PM, R. József C SL EOL : Boxpackingra és kérnék segítséget May 31, 2025 at 11:43 PM, Zoltán Harasztia FA : Oda is megyek May 31, 2025 at 11:44 PM, R. József C SL EOL : Ha sikerül megoldanom írok May 31, 2025 at 11:47 PM, R. József C SL EOL : Kész June 1, 2025 at 6:19 AM June 1, 2025 at 6:19 AM, Szijjártó Balázs : Modul Line 1, no.#1 small AGV: Slam error Check pls! June 1, 2025 at 6:19 AM, FA/CS/AGV_ Asjad : Checking June 1, 2025 at 6:21 AM, FA/CS/AGV_ Asjad : Fixed June 1, 2025 at 6:24 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs June 1, 2025 at 9:47 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK034 재고실사 제품 배출중인데 34번뱅크 확인 부탁드립니다. 제품 배출이 안되고 있어서요 June 1, 2025 at 9:49 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel could you please let FA technicians to support him? June 1, 2025 at 9:50 AM, Dániel Hufnágel : Of course! June 1, 2025 at 9:57 AM, N.Gábor F.A. : Now moving June 1, 2025 at 10:19 AM, 최준영(JoonYoung Choi) : Please check the error of detecting the light curtain on the buffer warehouse 1 line. June 1, 2025 at 12:15 PM, 요셉 : EOL agv 12 check plz June 1, 2025 at 12:15 PM, 요셉 : Slam error June 1, 2025 at 12:15 PM, FA/CS/AGV_ Asjad : Coming June 1, 2025 at 12:20 PM, FA/CS/AGV_ Asjad : Fixed June 1, 2025 at 5:03 PM, 최준영(JoonYoung Choi) : Please check the Home return Fail Error of Buffer Warehouse 2,4Line Connection Conveyor #1. June 1, 2025 at 5:04 PM, KIM SEYEON [김세연]_FA : @N.Gábor F.A. please check June 1, 2025 at 5:05 PM, N.Gábor F.A. : Im on my way June 1, 2025 at 5:13 PM, N.Gábor F.A. : Solved June 1, 2025 at 9:11 PM, Sási Zsolt SL/C/ EOL : 9es AGV áll hibával. Kérlek nézzétek meg June 1, 2025 at 9:12 PM, Sarvajcz Ferenc FA : Ok June 1, 2025 at 9:47 PM, Herceg Sándor SSL/C : This message was deleted. June 1, 2025 at 9:47 PM, Herceg Sándor SSL/C : Sziasztok! Formázás 10-es AGV ACS Alive alarm hibával áll Kérlek nézzetek rá! Koszi! June 1, 2025 at 9:47 PM, FA/CS/AGV/Taimur : Checking June 1, 2025 at 10:07 PM, R. József C SL EOL : Eol 6 előtt 9es agv áll Safety bumpernek ért a béka June 1, 2025 at 10:08 PM, Sarvajcz Ferenc FA : Ok June 1, 2025 at 10:09 PM, FA/CS/AGV/Taimur : Solved June 1, 2025 at 10:10 PM, Baek Hojong(백호종)FA : 06.01 night shift 18:00-06:00 Baek hojong 백호종 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 1, 2025 at 11:14 PM, R. József C SL EOL : 9es sorral szemben betöltő port riaszt June 1, 2025 at 11:14 PM, Sarvajcz Ferenc FA : Ok June 2, 2025 at 1:15 AM June 2, 2025 at 1:15 AM, Sási Zsolt SL/C/ EOL : This message was deleted. June 2, 2025 at 8:12 AM, FACS_JaewonShin invited 김상태. June 2, 2025 at 8:54 AM, FACS_JaewonShin : ■ 2nd June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 6 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 1 Choi wooseok - Plc control 1 Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 2 Jin jaejeong Kim sangtae June 2, 2025 at 8:57 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum PM님 금일 박스 해체기 교육은 모듈 R@R 진행으로 힘들꺼 같습니다. 내일 부터 진행하겠습니다. June 2, 2025 at 8:57 AM, [민겸]MinGyum : 알겠습니다. June 2, 2025 at 9:34 AM, Nikolett SL/B EOL : Sziasztok GF buffer hibára áll Valaki tudna jönni? Köszönöm June 2, 2025 at 9:36 AM, FA/CS/AGV_ Asjad : Solved June 2, 2025 at 9:37 AM, Boromisza Zoltán : Megyek June 2, 2025 at 3:10 PM, Nikolett SL/B EOL : Sziasztok Boxpacking Szetszedo a paletta tetejét leszedi viszont az oldalburkolatot rajta hagyja a Palettán valaki tudna jönni ?? June 2, 2025 at 3:10 PM, Nikolett SL/B EOL : Köszönöm June 2, 2025 at 3:23 PM, Duna Don : Colleagues are working on it now. Thank you!! June 2, 2025 at 3:42 PM, Boromisza Zoltán : Megyek June 2, 2025 at 5:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남쪽 셀 도크장 1F M0CNV036_RTV01 알람발생하여 확인 부탁드립니다 June 2, 2025 at 5:35 PM, FACS_Youngmin LEE : 네 이동하겠습니다. June 2, 2025 at 5:35 PM, Nikolett SL/B EOL : Sziasztok Boxpacking elszakad a pánt valaki tudna menni Köszönöm June 2, 2025 at 5:48 PM, FACS_Youngmin LEE : 조치되었습니다. June 2, 2025 at 5:53 PM, SKOH2/제조-셀,모듈 출하/김병호 : GF에 레일에서 바로 알람 발생했습니다 June 2, 2025 at 5:53 PM, SKOH2/제조-셀,모듈 출하/김병호 : 재품이 붙어 있어요 지난번 처럼요 June 2, 2025 at 5:54 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.02 Time: 18:00-06:00 1. Ji Seok Beom June 2, 2025 at 5:54 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남쪽 셀 도크장 GF M0CNV036_58_023 제품이 레일에서 붙어서 알람 발생했습니다. 확인 부탁드립니다 June 2, 2025 at 6:00 PM, FACS_TaehyeongJin : 이동중입니다 June 2, 2025 at 6:00 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 2, 2025 at 6:06 PM, FACS_TaehyeongJin : 조치완료하였습니다 June 2, 2025 at 6:08 PM, 배병민 (Bae Byoungmin) : 해당건은 저희 시간좀 날때 Lever 작업좀 해야할것 같습니다. 화,수중 Level 진행예정입니다. June 2, 2025 at 6:27 PM, Tklcz Alexandra SL/A : Sziasztok! Boxpackingen banding probléma, kérlek nézzétek meg. June 2, 2025 at 6:31 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다 펨님 감사합니다 June 2, 2025 at 7:21 PM, Csepi Árpád : Kész June 2, 2025 at 8:36 PM, Tóth Gyula : Sziasztok, U024168 paletta nem jön ki az MOCVN033_M03 porton. June 2, 2025 at 8:54 PM, Tklcz Alexandra SL/A : EOL buffer hibán áll kérlek nézzétek meg June 2, 2025 at 8:54 PM, Tklcz Alexandra SL/A : Buffer1 June 2, 2025 at 10:37 PM, Tklcz Alexandra SL/A : Technikust kérünk a boxpackingre, bandig error. June 2, 2025 at 11:31 PM, Édl Tamás : Kész June 2, 2025 at 11:53 PM, Tklcz Alexandra SL/A : Hi! Buffer 1 error MOSTK011-STK-OP#2. Near eol10 June 3, 2025 at 12:08 AM June 3, 2025 at 12:08 AM, Édl Tamás : Kész June 3, 2025 at 12:16 AM, VK (mcs) : @FA Please check First cell buffer M0STK011 -C02 Crane unload time out error. June 3, 2025 at 12:59 AM, Tklcz Alexandra SL/A : Top cover vacuum alarm box packing. Kérünk technikust June 3, 2025 at 1:06 AM, Brázik János : Solved June 3, 2025 at 1:21 AM, Édl Tamás : Kész June 3, 2025 at 2:14 AM, Tklcz Alexandra SL/A : Technikust kérünk a boxpackingre: banding error. June 3, 2025 at 2:17 AM, Magosi Erik : On Line3 there is a material agv with acs alive error. Please check June 3, 2025 at 2:20 AM, FA/CS/AGV/Taimur : Solved. Thank you June 3, 2025 at 2:20 AM, Magosi Erik : Thank You Sir June 3, 2025 at 2:37 AM, Brázik János : Kész June 3, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.03. "B" műszak, 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(2): Denkó János, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Böröcz Tamás Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, G June 3, 2025 at 2:18 PM, Vadász Dóra SSL/B : Sziasztok Box packingon szervo hiba. Kérem nézzétek meg. Köszönöm June 3, 2025 at 2:19 PM, Boromisza Zoltán : Úton June 3, 2025 at 2:40 PM, Rácz Dániel / FA : @Denkó Jani (F.A.) please June 3, 2025 at 2:51 PM, Boromisza Zoltán : Kész June 3, 2025 at 3:40 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 납측 M0STK 034,035 크레인 모두 기동 정지 상태입니다. 샐트레이 입고중이라 빠른 확인 부탁드립니다 June 3, 2025 at 3:41 PM, FACS_Hyeongi Son : 넵 확인하겠습니다 June 3, 2025 at 3:43 PM, SKOH2/제조-셀,모듈 출하/김병호 : @MCS/RTD M0CNV036_M01 carrier id : R200269 Destination can't be created. Please check. June 3, 2025 at 3:45 PM, FACS_TaehyeongJin : 조치완료하였습니다 June 3, 2025 at 3:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : @MCS/RTD M0CNV036_M01 carrier id : R200269 메니저님 위에사항도 같이 확인 부탁드립니다. 잡생성도 안되네요. June 3, 2025 at 3:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : 파렛트 리딩은 되는데요 June 3, 2025 at 3:48 PM, FACS_Hyeongi Son : 넵 이동하겠습니더 June 3, 2025 at 3:48 PM, FACS_Hyeongi Son : 화물 어디로 반송시키면 될까요? June 3, 2025 at 3:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 June 3, 2025 at 3:49 PM, Shakir (MCS) : This message was deleted. June 3, 2025 at 3:49 PM, Shakir (MCS) : RackInReply issue: No results for unload request rule June 3, 2025 at 3:53 PM, FACS_Hyeongi Son : @MCS Then you can't make this job? June 3, 2025 at 3:54 PM, Shakir (MCS) : Where you want this carrier? June 3, 2025 at 3:55 PM, FACS_Hyeongi Son : M0CNV036_M01 ->M0STK034_0100501 R200269 June 3, 2025 at 3:58 PM, 이재근(lee jae geun) : PlZ check AGV10 June 3, 2025 at 3:59 PM, Duna Don : Checking June 3, 2025 at 4:00 PM, Shakir (MCS) : Now carrier started to Move Thank you June 3, 2025 at 4:00 PM, Shakir (MCS) : Issue has been resolved June 3, 2025 at 4:00 PM, FACS_Hyeongi Son : Thank you:) June 3, 2025 at 4:01 PM, Duna Don : Solved June 3, 2025 at 4:02 PM, 이재근(lee jae geun) : thank you June 3, 2025 at 4:11 PM, Vadász Dóra SSL/B : Sziasztok Boxon problémánk van, oldalborítást nem veszi fel a masina. Nézzétek meg kérlek June 3, 2025 at 4:11 PM, FACS_Hyeongi Son : Going now June 3, 2025 at 4:15 PM, FACS_Hyeongi Son : Solved June 3, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:09 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.03 Time: 18:00-06:00 1. Ji Seok Beom June 3, 2025 at 6:15 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team M0STK034_C01 크레인 기동 정지 상태입니다. 확인 부탁드립니다!! June 3, 2025 at 6:17 PM, KIM SEYEON [김세연]_FA : @FACS_Hyeongi Son 과장님 34번 c01 크레인 확인 부탁드립니다! June 3, 2025 at 6:17 PM, FACS_Hyeongi Son : 지금 이동중입니다 June 3, 2025 at 6:17 PM, FACS_Hyeongi Son : 금방 조치하겠습니더 June 3, 2025 at 6:19 PM, FACS_Hyeongi Son : 조치했습니더 정상가동중입니다 June 3, 2025 at 6:27 PM, KIM SEYEON [김세연]_FA : 감사합니다 (좋아) June 3, 2025 at 6:27 PM, FACS_Hyeongi Son : 지금 M0STK034 화재 감지 센서 점검 좀 해야할것 같습니다 점검 시간은 약 15분정도 걸릴것 같습니다 June 3, 2025 at 6:32 PM, FACS_Hyeongi Son : 35번 창고 사용가능하면 일단 35번 창고로 입고 부탁드립니다 June 3, 2025 at 6:32 PM, SKOH2/제조-셀,모듈 출하/김병호 : 알겠습니다 매니저님 저희 셀트레이 입고 작업이 밀려 있어서 작업완료후 말씀부탁드립니다 June 3, 2025 at 6:32 PM, SKOH2/제조-셀,모듈 출하/김병호 : 메니저님 35번으러 저희가 넣지를 못합니다 June 3, 2025 at 6:33 PM, FACS_Hyeongi Son : 넵 알겠습니다 June 3, 2025 at 6:43 PM, FACS_TaehyeongJin : STK34 크레인 화재감지 센서 교체로 인해 RTV 가동 일시 중단 하였습니다 June 3, 2025 at 6:53 PM, KIM SEYEON [김세연]_FA : 네 완료되면 말씀 부탁드립니다 June 3, 2025 at 7:02 PM, FACS_TaehyeongJin : RTV 가동 시작하였습니다 June 3, 2025 at 7:07 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 3, 2025 at 7:08 PM, FACS_TaehyeongJin : @mcs M0CNV036 LF01 Z100959 이 파레트 부터 뒤에 대기중인 파레트를 STK35로 잡을 변경해주세요 June 3, 2025 at 7:10 PM, Mohammad Amir : Good Evening Sir, Checking! June 3, 2025 at 7:13 PM, Mohammad Amir : Sir, Please confirm,you would like me to send carrier Z100959 to STK035? Thank you very much! June 3, 2025 at 7:13 PM, FACS_TaehyeongJin : Yes June 3, 2025 at 7:14 PM, Mohammad Amir : Issue has been resolved ✅. I am monitoring for smooth delivery of pallet. Thank you very much! June 3, 2025 at 7:18 PM, Mohammad Amir : Sir, Update:- Cell pallet short Z100959 has been successfully stored in M0STK035(0200103) at 19:18 ✅. Thank you very much! June 3, 2025 at 7:24 PM, SKOH2/제조-셀,모듈 출하/김병호 : 설비 가동 얼마나 더 걸릴가요?? 셀트레이 입고작업후에 명일 출하 픔도 배출해야해서요 June 3, 2025 at 7:37 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 셀트레이 입고작업이 1시간이상 지연되고 있어서 얼마나 더 시간이 소요 될가요? 35번뱅크로 입고 되게 바꿔 주실수 있으신가요? June 3, 2025 at 7:40 PM, KIM SEYEON [김세연]_FA : @FACS_TaehyeongJin 과장님 @SKOH2/제조-셀,모듈 출하/김병호 와 현장서 만나서 문제가 뭔지 소통할수 있을까요? June 3, 2025 at 7:43 PM, Tklcz Alexandra SL/A : Hi! Modul boxpacking AGV 8 error. June 3, 2025 at 7:43 PM, FA-CS-AGV-Masoud : Coming June 3, 2025 at 7:45 PM, KIM SEYEON [김세연]_FA : @SKOH2/제조-셀,모듈 출하/김병호 죄송합니다만 라이트커튼 조치로 시간이 좀 지체됐습니다. June 3, 2025 at 7:45 PM, KIM SEYEON [김세연]_FA : 빨리 완료후 알려드리겠습니다 June 3, 2025 at 7:46 PM, FA-CS-AGV-Masoud : Port is full it’s not AGV problem Thanks June 3, 2025 at 7:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네, 감사합니다 June 3, 2025 at 7:51 PM, Mohammad Amir : This message was deleted. June 3, 2025 at 7:51 PM, Mohammad Amir : Dear Manager, Pallet Z100973 located at M0CNV036_LF01 it has destination to STK034 as STK034 is OOS that's why materials on CNV036 is not moving and afterwards there is a long queue of materials. I checked it is good to be deposited in STK035 as well,it will continue materials flow. Should I send it to STK035 ? Thank you very much! June 3, 2025 at 8:00 PM, FA-CS-AGV-Masoud : @Csepi Árpád Please check box packing , pallet remains at the port and two AGV are waiting in the queue to unload the pallet June 3, 2025 at 8:02 PM, SKOH2/제조-셀,모듈 출하/김병호 : Yes, please move to bank 35. June 3, 2025 at 8:03 PM, Mohammad Amir : Sure Manager, Working on it. Thank you very much! June 3, 2025 at 8:04 PM, Mohammad Amir : Issue has been resolved ✅. Now all the pallets located on MCNV036 has started to move and it will be deposited in STK035. I am monitoring. Thank you very much! June 3, 2025 at 8:06 PM, SKOH2/제조-셀,모듈 출하/김병호 : There are currently 80plt that have been unintroded. Can you move all of this to bank 35? June 3, 2025 at 8:07 PM, Mohammad Amir : Sure Manager, Could you please share me the Pallet ids. I will start working. Thank you very much! June 3, 2025 at 8:08 PM, Szentirmai Z. A/SSL : Please delete the commands of AGV#6 and #8. Please send the palettes on them back to the Cell Buffer June 3, 2025 at 8:08 PM, Mohammad Amir : Checking June 3, 2025 at 8:09 PM, Mohammad Amir : Please confirm me area ,is it Cell Buffer? Thank you! June 3, 2025 at 8:10 PM, SKOH2/제조-셀,모듈 출하/김병호 : Please move all products in MCNV036 to 35bank. I will put in 80plt from now on. June 3, 2025 at 8:10 PM, Szentirmai Z. A/SSL : The AGVs are waiting at the end of the box packing. Inappropriate pallets were released on the machine June 3, 2025 at 8:11 PM, Mohammad Amir : Sure Manager, Please start RackIn from M0CNV036_M01? I am monitoring and working on it. Thank you very much! June 3, 2025 at 8:12 PM, Mohammad Amir : Okay I am checking. Thank you! June 3, 2025 at 8:13 PM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you. we are starting now!! June 3, 2025 at 8:13 PM, Mohammad Amir : You are welcome! Sure Manager,Go ahead. June 3, 2025 at 8:16 PM, Mohammad Amir : @ACS Please cancel the command from ACS side it is not possible from MCS side anymore. Please cancel afterwards I will send it back to STK. Thank you very much! June 3, 2025 at 8:36 PM, Mohammad Amir : @ACS @FA Please check this issue it still exists. Thank you very much! June 3, 2025 at 9:08 PM, Mohammad Amir : @Szentirmai Z. A/SSL Update :- For carrier Z053898, I have cancelled the the job and send the carrier back to source STK. However for Carrier Z053899 located on AGV#8 for this Cancellation from MCS side is not possible so @ACS please cancel this job . Afterwards I will send it back to Source STK. Thank you very much! June 3, 2025 at 9:12 PM, FA-CS-AGV-Masoud : Thanks for update, AGV 6 is on the way to STK June 3, 2025 at 9:13 PM, KIM SEYEON [김세연]_FA : @FACS_Hyeongi Son 과장님 34번 크레인은 정상화 되었나요? June 3, 2025 at 9:13 PM, Mohammad Amir : You are welcome! June 3, 2025 at 9:22 PM, FACS_Hyeongi Son : 아직 조치 중입니다 June 3, 2025 at 9:27 PM, Mohammad Amir : Dear Manager, Update :- All materials have been successfully transferred to M0STK035. ✅ Feel free to contact me again if you need any further assistance. Thank you very much! June 3, 2025 at 9:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 안녕하세요 PM님 금일 셀트레이 입고 작업은 35bank로 임시 작업 진행하였습니다. 다만 문제가 되는것은 당팀의 작업 인원이 10시까지 근무입니다. 명일 셀 완제품 출하 제품이 모두 34bank에 있어서 명일 출하 준비를 미리해 놓아야하는데 내일 오전 6시부터 준비해야 하며, 수리가 되지 않으면 출하일정에 큰 문제가 생길수 있어 이점 이해해 주시길 바랍니다. 조치 완료 되시면 공유 부탁드립니다. June 3, 2025 at 9:30 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. June 3, 2025 at 9:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : Thank you for your great help. June 3, 2025 at 9:31 PM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 pm님 June 3, 2025 at 9:31 PM, Mohammad Amir : You are most welcome. June 3, 2025 at 9:40 PM, Mohammad Amir : @ACS @FA Please cancel the job for AGV#8 from ACS side ,from MCS job cancellation is getting failed,afterwards I will send it back to STK. AGV battery is draining. Thank you very much! June 3, 2025 at 10:07 PM, Szentirmai Z. A/SSL : @FA-CS-AGV-Masoud @Mohammad Amir Thank you for your help, now everything works fine! June 3, 2025 at 10:08 PM, Mohammad Amir : You are welcome! June 3, 2025 at 10:16 PM, FA-CS-AGV-Masoud : You’re welcome June 3, 2025 at 10:25 PM, FACS_TaehyeongJin : 화재감지센서 오류로 인한 통신문제 조치 진행중입니다 June 3, 2025 at 10:54 PM, Mohammad Amir : Dear PM @지석범PM (이반차FA) Could you please cancel the job for AGV#8(MOMGV012_VC08){Cell Buffer Vehicle } , unfortunately from MCS side cancellation is not possible, please cancel it from ACS side. Afterwards I will send it back to its source STK. Thank you very much! June 3, 2025 at 11:03 PM, Szentirmai Z. A/SSL : @Brázik János @Csepi Árpád @Édl Tamás Segítsegre lenne szüksegünk a box packingon a top cover felrakónál. Köszi June 3, 2025 at 11:06 PM, 지석범PM (이반차FA) : Do you mean H20250603192306354190-Z053899? June 3, 2025 at 11:07 PM, Mohammad Amir : Exactly Sir. Please cancel it. Thank you very much! June 3, 2025 at 11:08 PM, 지석범PM (이반차FA) : Canceled it Your welcome~ June 3, 2025 at 11:09 PM, Mohammad Amir : @Szentirmai Z. A/SSL @FA-CS-AGV-Masoud Issue has been resolved ✅ I have send the AGV#8 with carrier Z053899 to its source warehouse. Please let me know if you face any issues. June 3, 2025 at 11:10 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 11:11 PM, FA-CS-AGV-Masoud : Thank you for your follow-up and cooperation June 3, 2025 at 11:11 PM, Mohammad Amir : You are welcome! June 3, 2025 at 11:39 PM, KIM SEYEON [김세연]_FA : @SKOH2/제조-셀,모듈 출하/김병호 지금 34번 창고 문제가 해결이 늦어지는데, 34번창고 말고 35번에 있는 셀완제품 출하는 안되는건가요? 34번에만 셀완제품 출하분이 있는건가요? June 3, 2025 at 11:42 PM, SKOH2/제조-셀,모듈 출하/김병호 : 35번뱅크에는 완제품 수량이 얼마 없어서요. 내일 180plt 출하예정이라 34번 뱅크 수량이 대분입니다. pm님 June 4, 2025 at 12:47 AM June 4, 2025 at 12:47 AM, FACS_Hyeongi Son : @KIM SEYEON [김세연]_FA @SKOH2/제조-셀,모듈 출하/김병호 34번 크레인 조치되었습니다 아침에 바로 출하 가능합니다 June 4, 2025 at 1:48 AM, Szentirmai Z. A/SSL : @FA-CS-AGV-Masoud I would like to ask you for help with box packing. There is no empty palette in the machine from which we would remove the side cover and the top cover. Our top cover has already run out, so the packaging machine stopped. Can you help me with this? June 4, 2025 at 1:49 AM, FA-CS-AGV-Masoud : Sure , coming June 4, 2025 at 1:56 AM, Mohammad Amir : For you information:- Currently available materials for F0BPM011(-P02){Cell Packing Short }:-5 For Long(P01) :- 0 Thank you very much! June 4, 2025 at 2:00 AM, Szentirmai Z. A/SSL : Thank you June 4, 2025 at 2:00 AM, Mohammad Amir : You are welcome! June 4, 2025 at 3:08 AM, Mohammad Amir : @Csepi Árpád Please check M0STK014_C02 there is CRANE PLC error. Thank you! June 4, 2025 at 3:22 AM, Szentirmai Z. A/SSL : Please check CRC3 C/V2 16_006 AGV port (cell buffer#4) The AGV placed the palette here, then "Light curtain detectt error", I checked and reset it. But the stacker doesn't take the palette. It's like there is no job for this. June 4, 2025 at 3:23 AM, Mohammad Amir : Hello, Could you please tell me what is the pallet I'd so that I can check. Thank you very much! June 4, 2025 at 3:24 AM, Szentirmai Z. A/SSL : T704569 June 4, 2025 at 3:24 AM, Mohammad Amir : Checking June 4, 2025 at 3:29 AM, Mohammad Amir : @FA @Csepi Árpád Please check T704569 located at M0STK014_P10 ,it is not moving. Everything is good from MCS RTD side ✅. Please check physically,is Pallet position is correct. Thank you very much! June 4, 2025 at 3:46 AM, Mohammad Amir : Please check Port M0STK014_P10:- Since this carrier arrived at P10:- P10 went to OOS From 3:11-3:11 3:16-3:17 3:17-3:29 3:29-3:31 3:31-3:34 Thank you very much! June 4, 2025 at 3:52 AM, Csepi Árpád : Solved June 4, 2025 at 3:53 AM, Mohammad Amir : Thank you very much! 🙏 June 4, 2025 at 5:18 AM, SKOH2/제조-셀,모듈 출하/김병호 : 감시합니다!! June 4, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.04. FA "D" műszak: 9/13 Overtime (0):- Substitution (1): Szücs Géza Imre Sick (1):Nagy Zsolt Holiday (3): Martina Dávid, Kasztel Balázs, Hufnágel Dániel Shift change(0): ----- Elektróda(3): Oláh András, Szabadi Miklós, Kiss Balázs ----- Assembly GF(2): Novák Károly, Zsurbej Zsolt ----- Assembly 1F(2): Kovács Szabolcs, Novák Zoltán ----- Form+Modul(2): Nagy Gábor, Magyar Balázs June 4, 2025 at 6:31 AM, Szabolcs : @FA M0CNV036 lift problem. Check please. June 4, 2025 at 6:38 AM, N.Gábor F.A. : Solved June 4, 2025 at 6:46 AM, Jun(정우준)_SKOH FA : Day shift FA Schedule Date: 2025.06.04 Time: 06:00~18:00 1. Jeong WooJun PM 정우준 Köszönöm szépen June 4, 2025 at 7:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team June 4, 2025 at 7:31 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 셀 도크장에 제품 배출이 문제가 많다고 합니다. 6시부터 지금까지 2plt 밖에 배출이 되지 않고 있다고 합니다 8시부터 출하라서 빠른 확인 부탁드립니다 June 4, 2025 at 7:41 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check what is the problem at cell ship out dock June 4, 2025 at 7:41 AM, 원승연(Seungyeon Won) : Plz check buffer warehouse #1 June 4, 2025 at 7:48 AM, N.Gábor F.A. : Solved June 4, 2025 at 8:56 AM, Éváné Bori Viktória : Helló. Box packingra kérnék segítséget! @N.Gábor F.A. June 4, 2025 at 8:57 AM, N.Gábor F.A. : Okés June 4, 2025 at 9:57 AM, 원승연(Seungyeon Won) : Plz check again June 4, 2025 at 10:20 AM, 원승연(Seungyeon Won) : The AGV is being delayed due to Buffer Warehouse 1.” June 4, 2025 at 10:23 AM, FACS_Youngmin LEE : @Sazzad Bhai SKon Z100704 carrier plz move to stk 11 any place June 4, 2025 at 10:24 AM, Shakir (MCS) : Working on it June 4, 2025 at 10:26 AM, Sazzad Bhai SKon : Input port P06 is out of service June 4, 2025 at 10:27 AM, Sazzad Bhai SKon : + when the carrier reached there, ID read was missing June 4, 2025 at 10:43 AM, FACS_Youngmin LEE : solved June 4, 2025 at 11:12 AM, N.Gábor F.A. : @Éváné Bori Viktória Szia, szeretnénk kérni egy targoncást a csomagoló géphez. June 4, 2025 at 11:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_tema M0STK034_C01 크레인 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 4, 2025 at 11:14 AM, Éváné Bori Viktória : Az ott lévő 2 operátor, mindkettő targoncás. June 4, 2025 at 11:15 AM, N.Gábor F.A. : Jelenleg egyikük sincs itt June 4, 2025 at 11:26 AM, Éváné Bori Viktória : Küldök. June 4, 2025 at 11:26 AM, N.Gábor F.A. : Köszi June 4, 2025 at 11:34 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK034_C01 “ crane plc interface error” 크레인 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 4, 2025 at 11:35 AM, Shakir (MCS) : This message was deleted. June 4, 2025 at 11:35 AM, Shakir (MCS) : @N.Gábor F.A. June 4, 2025 at 11:38 AM, FACS_Youngmin LEE : 이동중입니다. June 4, 2025 at 11:40 AM, FACS_Youngmin LEE : solved June 4, 2025 at 11:46 AM, FACS_JaewonShin : Box packing MES NG Code 19 June 4, 2025 at 11:58 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 셀 완제품 창고 대응 감사합니다. 오전 출하 배출 작업은 끝났습니다. 12시 30분 부터 다시 오후 출하분 배출 작업진행하겠습니다. June 4, 2025 at 11:58 AM, Shakir (MCS) : @FA Please check M0STK011_c01 there is Crane shelf in abort (double cargo). Thank you June 4, 2025 at 11:59 AM, N.Gábor F.A. : Checking June 4, 2025 at 11:59 AM, FACS_Youngmin LEE : solved June 4, 2025 at 12:37 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget, a fedőt nem rakja fel a gép. @N.Gábor F.A. June 4, 2025 at 12:43 PM, N.Gábor F.A. : Szaladok June 4, 2025 at 1:15 PM, FA/CS/AGV/Taimur : @MCS Can you please delete the job for EOL line 2 Pallet ID: T704053 Line leader requested for it as they are handling the material manually. June 4, 2025 at 1:17 PM, Sazzad Bhai SKon : Aborted June 4, 2025 at 1:18 PM, Szabolcs : M0STK034 not working. Please check. June 4, 2025 at 1:21 PM, Shakir (MCS) : @FA @N.Gábor F.A. Please check M0STK034 crane is not moving, without error. Thank you June 4, 2025 at 1:23 PM, N.Gábor F.A. : There is a material on it that is paused for some reason, could you start it? June 4, 2025 at 1:24 PM, N.Gábor F.A. : S000484 June 4, 2025 at 1:31 PM, Shakir (MCS) : In MCS this carrier showing in shelf 0101701 not on Crane June 4, 2025 at 1:31 PM, Szabolcs : We need the material for the dock. M0CNV036_M2-to June 4, 2025 at 1:32 PM, N.Gábor F.A. : Ill chekit June 4, 2025 at 1:32 PM, Shakir (MCS) : When crane active to pickup then crane become paused June 4, 2025 at 1:37 PM, N.Gábor F.A. : Now working June 4, 2025 at 1:39 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK034_C01 크레인 기동 정지 상태입니다. 빠른 확인 부탁드립니다 June 4, 2025 at 1:42 PM, FACS_Youngmin LEE : 이동하겠습니다. June 4, 2025 at 1:46 PM, FACS_Youngmin LEE : 조치되었습니다. June 4, 2025 at 1:57 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 4, 2025 at 1:58 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 4, 2025 at 4:14 PM, Éváné Bori Viktória : Sziasztok! Box packingre szeretnénk segítséget kérni! @N.Gábor F.A. June 4, 2025 at 4:15 PM, N.Gábor F.A. : Megyek már June 4, 2025 at 4:16 PM, Éváné Bori Viktória : A hátsó nyomtatóval van probléma. June 4, 2025 at 4:21 PM, N.Gábor F.A. : Azzal is volt Kész :) June 4, 2025 at 4:37 PM, Éváné Bori Viktória : Köszi June 4, 2025 at 4:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 매니저님 지금 셀트레이 입고 작업 진행 하려합니다. June 4, 2025 at 4:48 PM, FACS_Hyeongi Son : 넵 알겠습니다 June 4, 2025 at 5:11 PM, Éváné Bori Viktória : Helló eol AGV15 ACS alive alarm move please June 4, 2025 at 5:17 PM, FA/CS/AGV/Taimur : Checking June 4, 2025 at 5:17 PM, FA/CS/AGV/Taimur : Solved. June 4, 2025 at 5:19 PM, Éváné Bori Viktória : Sziasztok! GF 1 buffer hibára áll ki, meg kellene nézni June 4, 2025 at 5:20 PM, Shakir (MCS) : @FA Please check M0STK011_P12, c/V Data mismatch error June 4, 2025 at 5:20 PM, N.Gábor F.A. : Checking June 4, 2025 at 5:25 PM, N.Gábor F.A. : Solved June 4, 2025 at 5:34 PM, 유경호(RYU KYEONGHO) : @mcs Please check the box unpacking machine. It seems to have been stopped for about an hour. June 4, 2025 at 5:36 PM, Shakir (MCS) : AGV04 has been assigned On the way Thank you June 4, 2025 at 5:41 PM, N.Gábor F.A. : Now working June 4, 2025 at 5:44 PM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.04 Time:18:00~06:00 Baek Hojong 전극 조성준 (Cho Sung Jun) GF 최명운 (CHOI Myoungwoon) 1F 김정희 (Kim jeong hul) June 4, 2025 at 6:05 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek az 5os sorra. 9es AGV hibával áll June 4, 2025 at 6:05 PM, FA-CS-AGV-Masoud : Coming June 4, 2025 at 6:08 PM, FA-CS-AGV-Masoud : Solved June 4, 2025 at 6:31 PM, Sási Zsolt SL/C/ EOL : 8as Agvt kérlek küldjétek el June 4, 2025 at 6:31 PM, FA-CS-AGV-Masoud : Coming June 4, 2025 at 6:41 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 SEW travel X fault June 4, 2025 at 6:42 PM, Zoltán Harasztia FA : Cheking June 4, 2025 at 6:45 PM, Zoltán Harasztia FA : Solved June 4, 2025 at 7:02 PM, Sási Zsolt SL/C/ EOL : AGV #8 is in manual mode at Line 5-6. To avoid battery drain, please start it in automatic mode. June 4, 2025 at 7:07 PM, FA-CS-AGV-Masoud : This AGV was set to manual mode in order to create adequate space for loading and unloading the manual job at EOL 5. There is no issue with the battery; it is being fully monitored. It has been switched to automatic mode. Thank you for your attention. June 4, 2025 at 7:07 PM, Sási Zsolt SL/C/ EOL : Thank you June 4, 2025 at 7:51 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 C/V Light curtain detect error June 4, 2025 at 7:52 PM, Zoltán Harasztia FA : Cheking June 4, 2025 at 7:56 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Bontó oldalon a sidecovernál van gond June 4, 2025 at 7:57 PM, Zoltán Harasztia FA : Megyünk June 4, 2025 at 7:57 PM, R. József C SL EOL : Köszönöm June 4, 2025 at 8:31 PM, R. József C SL EOL : Boxpackingra ismét kérnék szépen segítséget June 4, 2025 at 8:32 PM, Sarvajcz Ferenc FA : Megnézem June 4, 2025 at 8:37 PM, Sarvajcz Ferenc FA : Kész. June 4, 2025 at 8:38 PM, R. József C SL EOL : Köszönöm June 4, 2025 at 8:56 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK034 재가동 오래 걸리실가요? 명일 셀출하수량 14셋트 더 배출해야 해서요 June 4, 2025 at 8:57 PM, FACS_Hyeongi Son : 지금 정상 가동중입니다 June 4, 2025 at 8:58 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 June 4, 2025 at 9:47 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget Vacuum hiba June 4, 2025 at 9:47 PM, Sarvajcz Ferenc FA : Ok. June 4, 2025 at 9:54 PM, Sarvajcz Ferenc FA : Kész June 4, 2025 at 10:00 PM, R. József C SL EOL : Köszönöm June 5, 2025 at 12:09 AM June 5, 2025 at 12:09 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek Boxpackingra. June 5, 2025 at 12:09 AM, Zoltán Harasztia FA : Megyünk June 5, 2025 at 2:06 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 5, 2025 at 2:09 AM, R. József C SL EOL : Boxpackingal szemben out porton 4#es agv Acs alive alarm hibával áll Ezt is nézzétek meg kérlek June 5, 2025 at 2:09 AM, FA-CS-AGV-Masoud : Coming June 5, 2025 at 2:12 AM, FA-CS-AGV-Masoud : Solved June 5, 2025 at 2:27 AM, Sarvajcz Ferenc FA : Jaja kész June 5, 2025 at 2:55 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 5, 2025 at 2:55 AM, Döme György F.A : Megyek June 5, 2025 at 2:55 AM, R. József C SL EOL : Köszönöm June 5, 2025 at 3:03 AM, Döme György F.A : Minden is kész June 5, 2025 at 3:25 AM, 한상범(Han Sang Beom) : Please check AGV12 @FA June 5, 2025 at 3:25 AM, FA-CS-AGV-Masoud : Coming June 5, 2025 at 3:27 AM, FA-CS-AGV-Masoud : Solved June 5, 2025 at 3:40 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget ismét Vacuum hiba June 5, 2025 at 3:41 AM, Döme György F.A : Megyek June 5, 2025 at 3:44 AM, R. József C SL EOL : Köszönöm June 5, 2025 at 3:47 AM, Sarvajcz Ferenc FA : Oke. June 5, 2025 at 4:24 AM, R. József C SL EOL : Ismét kérnék segítséget boxpackingra June 5, 2025 at 4:26 AM, Sarvajcz Ferenc FA : Ok June 5, 2025 at 5:08 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK013_P03 PIO interface error June 5, 2025 at 5:09 AM, Zoltán Harasztia FA : Cheking June 5, 2025 at 5:12 AM, Zoltán Harasztia FA : Solved June 5, 2025 at 5:14 AM, VK (mcs) : @FA Please check First cell buffer M0STK011 Crane fork right over run detect. June 5, 2025 at 5:15 AM, Zoltán Harasztia FA : Solved June 5, 2025 at 6:09 AM, Éváné Bori Viktória : Helló! GF buffer 1 probléma van vele, kérlek nézzétek meg! June 5, 2025 at 6:10 AM, N.Gábor F.A. : Mindjárt megyünk June 5, 2025 at 6:41 AM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget, a címkézővel van gond. June 5, 2025 at 7:03 AM, N.Gábor F.A. : Megyek June 5, 2025 at 7:14 AM, Szabolcs : @FA M0STK035_P13 problem. Check please. June 5, 2025 at 7:17 AM, N.Gábor F.A. : Solved June 5, 2025 at 8:27 AM, FACS_JaewonShin : ■ 5th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Choi wooseok Oh changhoon - PLC control 1 Kim bareum □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 2 Jin jaejeong Kim sangtae June 5, 2025 at 9:24 AM, Szabolcs : @FA M0STK035_P13 problem. Check please. June 5, 2025 at 9:27 AM, Éváné Bori Viktória : Sziasztok! Box packingen segítségre lenne szükségünk. Nem megy át a raklap. June 5, 2025 at 9:30 AM, N.Gábor F.A. : Megyek June 5, 2025 at 9:36 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team 남쪽 셀도크장 GF M0CNV036_LF02 알람발생해서 확인 부탁드립니다 June 5, 2025 at 9:37 AM, FACS_Youngmin LEE : 이동하겠습니다. June 5, 2025 at 9:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : 헝가리 테크니션분이 오셨습니다. 확인중이십니다. June 5, 2025 at 9:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : 조치 되었습니다 June 5, 2025 at 9:42 AM, N.Gábor F.A. : Solved June 5, 2025 at 10:10 AM, Éváné Bori Viktória : Sziasztok! A GF 1 és 2 bufferen hibajelzés van. Gyertek kérlek June 5, 2025 at 10:13 AM, Shakir (MCS) : @FA M0STK011_P06: Light curtain detect error June 5, 2025 at 10:19 AM, FA/CS/AGV/Taimur : Solved June 5, 2025 at 10:22 AM, N.Gábor F.A. : Kész June 5, 2025 at 10:28 AM, Éváné Bori Viktória : Köszi June 5, 2025 at 11:29 AM, 원승연(Seungyeon Won) : S000623 해당 팔레트 사이드 커버 씌워진채로 5라인 설비로 투입되었습니다. 박스 해체기 6월 2일 14:30으로 결과 확인됩니다. 해당 팔레트는 버퍼창고 앞 보관 중입니다. 확인 부탁드립니다. @배병민 (Bae Byoungmin) @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) June 5, 2025 at 11:30 AM, 원승연(Seungyeon Won) : S000624도 사이드 커버 있습니다. June 5, 2025 at 11:31 AM, Sazzad Bhai SKon : Current location is F5CPM010_P01, arrived at 11:24 June 5, 2025 at 11:35 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) S000624는 6월2일 14:38입니다. June 5, 2025 at 11:36 AM, [민겸]MinGyum : 시작시간 14:31 종료시간 14:38 입니다 June 5, 2025 at 11:55 AM, 배병민 (Bae Byoungmin) : 금주 월요일 박스 해체기 사이드 커버 part가 미사용으로 변경되어 있었습니다. 모니터링 하다가 발견되어 바로 사용으로 전환해두었습니다 오퍼레이터 교육시 해당 모드 교육 진행하고있습니다. June 5, 2025 at 11:56 AM, 원승연(Seungyeon Won) : 확인 감사합니다 June 5, 2025 at 11:56 AM, 원승연(Seungyeon Won) : This message was deleted. June 5, 2025 at 12:22 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget, pantoloszalag probléma van. June 5, 2025 at 12:37 PM, N.Gábor F.A. : Megyünk June 5, 2025 at 1:54 PM, 이재근(lee jae geun) : plz check AGV13 5 lines ahead June 5, 2025 at 1:54 PM, FA/CS/AGV/Taimur : Checking June 5, 2025 at 2:22 PM, 배병민 (Bae Byoungmin) : @준용 @김성식 박스포장기 NG port에서 MES code "6" 팝업창 발생되는데 6번이 어떤 경우인지 알수있을까요? June 5, 2025 at 2:27 PM, 준용 : 에러난 파렛트 명 어떤걸까요? June 5, 2025 at 2:44 PM, 배병민 (Bae Byoungmin) : R200250 입니다 June 5, 2025 at 2:56 PM, Éváné Bori Viktória : Helló EOL AGV 14 error please move. June 5, 2025 at 2:57 PM, FA/CS/AGV/Taimur : Sure June 5, 2025 at 4:24 PM, Éváné Bori Viktória : Helló! EOL AGV 13 error move please. June 5, 2025 at 4:24 PM, FA/CS/AGV/Taimur : Solving. Thank you June 5, 2025 at 4:49 PM, Éváné Bori Viktória : Sziasztok! GF buffer 3-4 error kérlek nézzétek meg. June 5, 2025 at 4:55 PM, N.Gábor F.A. : Bocsi én fogócskáztam a daruval hiba miatt June 5, 2025 at 5:19 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget! June 5, 2025 at 5:19 PM, N.Gábor F.A. : Megyek June 5, 2025 at 5:28 PM, Tóth Gyula : Sziasztok, MOCNV036_M02 Megálltak a konvejoron a cella betöltések. June 5, 2025 at 5:33 PM, N.Gábor F.A. : Kóreai kollégák dolgoznak a 34 es raktárral, azért nem megy tovább az anyag. June 5, 2025 at 5:54 PM, FACS_JaewonShin invited FACS_Wooseok Choi, FACS_Bareum kim and FACS_오창훈_CHANGHOON. June 5, 2025 at 6:09 PM, R. József C SL EOL : Boxpackingra kérnék segítséget 2-es pántolónál ki van kapcsolva a pántoló kezelő panel June 5, 2025 at 6:14 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남측 셀 도크장 빈트레이 입고작업중인데 제품이 34뱅크로 안들어 가고 멈추어 있는데 문제가 있으실까요? June 5, 2025 at 6:15 PM, Mohammad Amir : Good Evening Manager, Checking. June 5, 2025 at 6:15 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 C/V Light curtain detect error June 5, 2025 at 6:16 PM, Zoltán Harasztia FA : Cheking June 5, 2025 at 6:16 PM, Tóth Gyula : MOCNV036_M01 not working. June 5, 2025 at 6:19 PM, Zoltán Harasztia FA : Solved June 5, 2025 at 6:21 PM, Sarvajcz Ferenc FA : ..nézem.. June 5, 2025 at 6:22 PM, Mohammad Amir : This message was deleted. June 5, 2025 at 6:22 PM, Mohammad Amir : This message was deleted. June 5, 2025 at 6:23 PM, Mohammad Amir : @Zoltán Harasztia FA Please check Z101169 located at M0CNV036_RTV01 ,it is not moving and blocking all the materials transfer. Everything is okay form MCS RTD side ✅. Please check physically,is Pallet in correct position. Thank you very much! June 5, 2025 at 6:23 PM, Mohammad Amir : @Tóth Gyula Because of this issue Port M01 is not working. Thank you! June 5, 2025 at 6:27 PM, Zoltán Harasztia FA : Solved June 5, 2025 at 6:28 PM, Mohammad Amir : Dear Manager, Issue has been resolved ✅. Materials delivery has been normalised. I am monitoring. Thank you very much! June 5, 2025 at 6:28 PM, Mohammad Amir : Thank you very much! June 5, 2025 at 6:29 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @최준영(JoonYoung Choi) 현재 박스 포장기 2단 밴딩쪽 메인 판넬 전원 off 발생으로 UT 1차 전원측 확인 중입니다. 금일 야간 생산 필요 수량이 어느정도 될지 대략 공유 부탁드립니다. June 5, 2025 at 6:29 PM, Mohammad Amir : M0CNV036_M01 has started to work . ✅ You may start puttin Materials in again. Thank you! June 5, 2025 at 6:31 PM, Tóth Gyula : Now working. Thank you. June 5, 2025 at 6:31 PM, Mohammad Amir : You are welcome! June 5, 2025 at 6:51 PM, 노영일 (Yeongil Noh) : @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 이거 확인 부탁 드립니다 June 5, 2025 at 6:52 PM, 유경호(RYU KYEONGHO) : 현대 출하는 내일 없습니다. 1트럭 출하 계획 취소입니다. June 5, 2025 at 6:57 PM, SKOH2/제조-셀,모듈 출하/김병호 : @정낙정(JEONG NAK JEONG) 명일 포드 출하가 5대 예정입니다. 명일 출하 수량이 부족합니다. June 5, 2025 at 6:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : 현재 완제품창고에 61,248 (174plt) 있습니다, 명일 출하 수량에 2,112(6plt) 부족합니다 June 5, 2025 at 7:01 PM, 최준영(JoonYoung Choi) : 알겠습니다~! June 5, 2025 at 7:28 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @최준영(JoonYoung Choi) UT팀에서 즉각 지원해주셔서 현제 가동되었습니다. 이후 상황은 모니터링 해보겠습니다. 감사합니다 June 5, 2025 at 7:56 PM, R. József C SL EOL : Eol 2bsorra nem érkezik üres paletta Nézzétek meg kérlek June 5, 2025 at 7:56 PM, Sarvajcz Ferenc FA : Ok.. June 5, 2025 at 7:57 PM, R. József C SL EOL : Semmi June 5, 2025 at 7:57 PM, R. József C SL EOL : Most erkezik June 5, 2025 at 7:57 PM, 최준영(JoonYoung Choi) : 감사합니다~! June 5, 2025 at 7:57 PM, Mohammad Amir : AGV#18 on the way. ✅ Thank you! June 5, 2025 at 7:57 PM, Sarvajcz Ferenc FA : Ok June 5, 2025 at 9:07 PM, Sási Zsolt SL/C/ EOL : Sziasztok. Boxpackingen van egy vacuum hiba. Kérlek nézzétek meg June 5, 2025 at 9:07 PM, Sarvajcz Ferenc FA : Ok June 5, 2025 at 9:07 PM, Zoltán Harasztia FA : Megyek June 5, 2025 at 9:07 PM, Sási Zsolt SL/C/ EOL : Köszönöm June 5, 2025 at 10:37 PM, Fodor István SL/C : Sziasztok Boxpackingra kellene egy kis segitseg. Vaccum hiba Koszi June 5, 2025 at 10:38 PM, Zoltán Harasztia FA : Megyek June 5, 2025 at 11:51 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek. 9es AGV áll hibával June 5, 2025 at 11:51 PM, FA-CS-AGV-Masoud : Coming June 5, 2025 at 11:55 PM, FA-CS-AGV-Masoud : Solved June 5, 2025 at 11:56 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 6, 2025 at 12:01 AM June 6, 2025 at 12:01 AM, Mohammad Amir : @FA @Zoltán Harasztia FA please check M0STK013_C01 there is CRANE PLC interface error. Thank you! June 6, 2025 at 12:02 AM, Zoltán Harasztia FA : Cheking June 6, 2025 at 12:15 AM, Sarvajcz Ferenc FA : Okes June 6, 2025 at 12:15 AM, R. József C SL EOL : Köszönöm June 6, 2025 at 12:20 AM, R. József C SL EOL : Eol 6-4 sorokra nem érkezik paletta, kérlek nézzétek meg June 6, 2025 at 12:21 AM, Mohammad Amir : Checking June 6, 2025 at 12:23 AM, Mohammad Amir : There is job to tranfer empty pallet to both Line EOL-4&6 , however currently STK013 is OOS , that's why pallet not coming. I already informed the FA about the issue. I am monitoring. Thank you very much! June 6, 2025 at 12:24 AM, R. József C SL EOL : Thank you Amir June 6, 2025 at 12:24 AM, Mohammad Amir : You are welcome! June 6, 2025 at 12:26 AM, Döme György F.A : A probléma megoldva.A 4-es sorra most viszi ki a AGV18 June 6, 2025 at 12:26 AM, Mohammad Amir : Issue has been resolved ✅. Pallet R200274 AGV#18 on the way to EOL-6. And pallet T703756 on the way to EOL-4. Thank you very much! June 6, 2025 at 12:28 AM, Döme György F.A : 6-os sorra bocsánat.A 4-es sorra a palettát most rakja ki a daru. June 6, 2025 at 12:29 AM, R. József C SL EOL : Köszönöm szépen mindenkinek June 6, 2025 at 12:29 AM, Mohammad Amir : This message was deleted. June 6, 2025 at 12:29 AM, Mohammad Amir : Update:- For EOL-4 AGV#13 on the way ✅. Thank you very much! June 6, 2025 at 2:48 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 6, 2025 at 2:57 AM, Sarvajcz Ferenc FA : Vagyunk June 6, 2025 at 2:59 AM, Döme György F.A : Kész June 6, 2025 at 3:35 AM, R. József C SL EOL : Gyertek kérlek boxpackingra 5ös agv félig rakta ki a palettát June 6, 2025 at 3:36 AM, Sarvajcz Ferenc FA : Uton.. June 6, 2025 at 3:39 AM, R. József C SL EOL : Megoldva Viszont a 2 magas pántoló folyamatosan tepi June 6, 2025 at 3:53 AM, Sási Zsolt SL/C/ EOL : 13as AGV hibával áll az 5os sorral szemben. Kérlek ellenőrizzétek June 6, 2025 at 3:54 AM, FA-CS-AGV-Masoud : Coming June 6, 2025 at 3:57 AM, FA-CS-AGV-Masoud : Solved June 6, 2025 at 3:58 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK013_P01 PIO interface error June 6, 2025 at 3:58 AM, Döme György F.A : Coming June 6, 2025 at 4:02 AM, Döme György F.A : Solved June 6, 2025 at 4:12 AM, Balázs Róbert SL : 3as soron kis AGV meg állt,nem indul. Nézzétek meg légyszíves June 6, 2025 at 4:12 AM, FA-CS-AGV-Masoud : Coming June 6, 2025 at 4:16 AM, FA-CS-AGV-Masoud : Solved June 6, 2025 at 4:16 AM, Balázs Róbert SL : Thx June 6, 2025 at 4:17 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check port MFMFA300_P34 June 6, 2025 at 4:20 AM, Döme György F.A : Checking June 6, 2025 at 4:32 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget ismét June 6, 2025 at 4:32 AM, Sarvajcz Ferenc FA : Box packing folyamatos ellenőrzés alatt van... June 6, 2025 at 4:44 AM, R. József C SL EOL : Köszönöm June 6, 2025 at 6:26 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.06. 10+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Support(1): 김지 June 6, 2025 at 6:57 AM, Szabolcs : @FA M0STK035_P13 probelm. Check please. June 6, 2025 at 6:58 AM, Denkó Jani (F.A.) : Megyünk June 6, 2025 at 7:03 AM, Denkó Jani (F.A.) : Solved 🤝 June 6, 2025 at 8:00 AM, FACS_JaewonShin : ■ 6th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon □Formation / Module - Mechanic 1 Lee yeongmin - PLC Control 3 Jin jaejeong Kim sangtae Kim bareum June 6, 2025 at 9:03 AM, Szabolcs : @FA M0STK035_P13 probelm. Check please. June 6, 2025 at 9:10 AM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum PM님 박스해체기 오퍼레이터 교육 금일까지 진행 예정입니다. 9:30~ June 6, 2025 at 9:10 AM, [민겸]MinGyum : 알겠습니다. June 6, 2025 at 9:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035_P13 1F(south) 알람발생하여 확인 부탁드립니다. June 6, 2025 at 9:13 AM, FACS_Youngmin LEE : 이동하겠습니다. June 6, 2025 at 9:39 AM, FACS_Youngmin LEE : 조치되었습니다. June 6, 2025 at 9:41 AM, duzzaman Md (MCS) : @FA Please check First cell buffer M0STK011 Crane fork right over run detect. June 6, 2025 at 9:41 AM, Boromisza Zoltán : Okey June 6, 2025 at 9:50 AM, Boromisza Zoltán : Solved June 6, 2025 at 10:16 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035_P13 1F(south) 다시 알람발생하여 확인 부탁드립니다. June 6, 2025 at 10:21 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035_P13 1F(south) error code0322”div pallet detect error” pallet data : R200215 확인 부탁드립니다. June 6, 2025 at 10:22 AM, FACS_Youngmin LEE : 이동하겠습니다. June 6, 2025 at 10:23 AM, Boromisza Zoltán : Okey June 6, 2025 at 10:29 AM, FACS_Youngmin LEE : 조치되었습니다. June 6, 2025 at 1:37 PM, duzzaman Md (MCS) : @FA please check M0STK038_C01 there is CRANE PLC interface error. Thank you! June 6, 2025 at 1:40 PM, Boromisza Zoltán : Boeing June 6, 2025 at 1:43 PM, Boromisza Zoltán : Solved June 6, 2025 at 3:53 PM, Nikolett SL/B EOL : Sziasztok GF buffer 9-10 line szemben egy agv kiállt hibára valaki tudna jönni? Köszönöm June 6, 2025 at 3:58 PM, FA/CS/AGV/Taimur : Solved June 6, 2025 at 4:26 PM, Nikolett SL/B EOL : Between line 7-8, there is an AGV charging station on the street. Can someone send it to me? June 6, 2025 at 4:26 PM, FA/CS/AGV/Taimur : Sure June 6, 2025 at 4:28 PM, [민겸]MinGyum : It's been processed. June 6, 2025 at 5:11 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 남쪽 셀 도크장 GF 알람발생하여 확인 부탁드립니다. June 6, 2025 at 5:11 PM, SKOH2/제조-셀,모듈 출하/김병호 : 금일 셀트레이 입고가 많이 지연되고 있습니다. 빠른확인 부탁드립니다 June 6, 2025 at 5:16 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 안녕하세요 PM님 샐트레이 입고 작업 중인데 M0STK034 뱅크로만 화성 포장기에서 셀입고 및 샐도크장에 셀트레이를 양쪽에서 입고 하고 있어 샐트레이 입고작업이 너무 지연되고 있습니다. 셀트레이(empty) 입고작업시 35번뱅크로만 이용가능할까요? June 6, 2025 at 5:32 PM, 배병민 (Bae Byoungmin) : 우선 지난번 미팅시 우선적으로 34번 창고는 Full PLT 35번 창고는 Empty PLT 사용으로 진행한다고 전달 받았습니다. 메일상으로 운영안 회신 주시면 검토 후 알려드리겠습니다. June 6, 2025 at 5:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 남쪽 셀 도크장 GF 알람발생하여 확인 부탁드립니다. June 6, 2025 at 5:45 PM, SKOH2/제조-셀,모듈 출하/김병호 : 같은 구역에 알람발생 하였습니다. June 6, 2025 at 5:46 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다. 해당내용 당팀 정재영pm님께 전달드려 회신드리도록 말씀드리겠습니다. June 6, 2025 at 5:52 PM, FACS_Hyeongi Son : 조치하였습니다 June 6, 2025 at 6:06 PM, FA CS AGV Jawad : @FA can you plz check STK 11, data mismatch error June 6, 2025 at 6:08 PM, 배병민 (Bae Byoungmin) : @FACS_Hyeongi Son @FACS_TaehyeongJin 확인 좀 부탁드려요 June 6, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 6, 2025 at 6:11 PM, FACS_Hyeongi Son : 지금 조치중입니다 June 6, 2025 at 6:20 PM, SKOH2/제조-셀,모듈 출하/김병호 : MCS/RTD team Now cell tray(empty) plt is being in stock as M0STK034, and the self-employment is being delayed too much. Can you put all the empty cell trays currently hanging on the M0CNV036 line in M0STK035?? June 6, 2025 at 6:21 PM, VK (mcs) : Checking June 6, 2025 at 6:21 PM, SKOH2/제조-셀,모듈 출하/김병호 : The work of receiving the empty cell tray is delayed too much. I need your help. June 6, 2025 at 6:24 PM, Tklcz Alexandra SL/A : Hello! EOL4e does not bring a palette for AgV. June 6, 2025 at 6:25 PM, Tklcz Alexandra SL/A : Until then we have to fill the line manually, so please check it as soon as possible. June 6, 2025 at 6:30 PM, VK (mcs) : Jobs are created by interrail to STK 34. All has already job to that destination and changing destination on CNV is make an error. If you are asking me to Chang in job in beginning, unfortunately I have not permission to change the rule. June 6, 2025 at 6:31 PM, VK (mcs) : AGV 10 is on the way. June 6, 2025 at 6:33 PM, Tklcz Alexandra SL/A : Thanks! June 6, 2025 at 6:37 PM, SKOH2/제조-셀,모듈 출하/김병호 : Who should I ask? June 6, 2025 at 6:47 PM, FACS_TaehyeongJin : 조치완료 하였습니다 June 6, 2025 at 6:54 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA @박태영 현재 자동화창고 셀트레이 입고가 너무 지연되고 있어서 35번뱅크 수동으로 입고 가능하신지 문의 드립니다. MCS/RTD 팀에서도 권한이 없다고 하시는데 문제 해결 방안이 없을까요? 저희 도크장에 아직 하역 하지 못한 트럭이 두대나 있습니다. June 6, 2025 at 7:06 PM, 배병민 (Bae Byoungmin) : 현재 지연되지않고 순차적으로 정상 입고진행중입니다. 다만, 도크장에서의 지게차 투입 속도가 빨라서 밀려있는것입니다. 보다 빠른 입고를 위해 다른 창고로 수동으로 넣기워해서는 저희 인원이 붙어서 계속 대응해줘야하는 부분으로 이부분은 현재 대응이 어려운 상황입니다. 평소와 동일하게 입고를 하였을텐데 금일 특별히 하역 지체되는 부분이 있으실까요? June 6, 2025 at 7:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 남쪽 셀 도크장 GF 알람발생하여 확인 부탁드립니다. June 6, 2025 at 7:08 PM, VK (mcs) : @FA Please check M0CNV036 (58023) Work data error. June 6, 2025 at 7:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : 빠른 확인 부탁드립니다 June 6, 2025 at 7:08 PM, FACS_Hyeongi Son : 넵 이동하겠슺니다 June 6, 2025 at 7:13 PM, FACS_TaehyeongJin : 조치완료하였습니다 June 6, 2025 at 8:03 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 PM님 현재 상황이 34번뱅크 하나로만 1.셀포장기에서 완제품입고 2.완제품창고에서 셀트레이 해체기로 출고 3.셀도크정에서 완제품창고로 셀트레이 입고 위 세가지 작업을 34번뱅크에서 크레인이 하나로만 작업이 진행하다보니 도크장에서 셀트레이 수동입고작업 시간이 너무 지연되고 있는 사항입니다. 해당 내용은 당팀 정재영 pm님께 알림 드렸습니다. June 6, 2025 at 8:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 6, 2025 at 8:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 금일 미입고된 셀트레이 입고 작업 및 차주 출하 완제품 배출을 일요일 오전 부터 진행하려 합니다. 셀 도크장에서 34번뱅크까지 설비 정지 및 비가동이 너무 많아 한국 메니저님들께서 현장에 상주하여 모니터링 및 입고작업 지원 요청 부탁 드리고 싶습니다. 가능하실가요? June 6, 2025 at 8:23 PM, 배병민 (Bae Byoungmin) : 김병호 주임님 비가동이 너무 많다?? 라는게 어떤 근거인지 모르겠습니다. 다들 고생하고 적극적으로 대응 하고 있는 상황에서 그런 말은 삼가해주시기 바랍니다. 금번 34번 창고 크레인 케이블 문제로 인한 비가동 부분은 조치되었습니다. 일요일 저희 FA 테크니션분들 계시니 그분들이 대응하겠습니다. 일요일 문제되는 부분있으시면 저한테 직접 전화주세요 제가 대응할께요 June 6, 2025 at 8:33 PM, 배병민 (Bae Byoungmin) : 우선 저희 FA 테크니션분들이 대응 해드리겠습니다. 제가 일요일 출근이라 현장서 같이 봐드리겠습니다. June 6, 2025 at 8:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 June 6, 2025 at 9:57 PM, Tklcz Alexandra SL/A : Hi! We need Korean technical support to boxunpacking. Error: F05182 503 height unmatch June 6, 2025 at 10:05 PM, Nagy Mónika : Sziasztok, Modul line7-TR OP2-höz segítséget kèrnèk. Köszönöm! June 6, 2025 at 10:18 PM, Csepi Árpád : Solved June 6, 2025 at 10:18 PM, FACS_Hyeongi Son : Solved June 6, 2025 at 11:40 PM, Tklcz Alexandra SL/A : AGV 16 error. Near eol4 buffer June 7, 2025 at 2:07 AM June 7, 2025 at 2:07 AM, Nagy Mónika : Sziasztok,Ismét a Modul line7-TR OP2-höz segítséget kèrnèk. Köszönöm! June 7, 2025 at 2:21 AM, Tklcz Alexandra SL/A : Please move AGV in modul dock. Forklift. June 7, 2025 at 2:21 AM, FA CS AGV Jawad : Sure I do.. June 7, 2025 at 3:21 AM, Tklcz Alexandra SL/A : Near 5L in buffer AGV12 error June 7, 2025 at 3:23 AM, FA CS AGV Jawad : Solved June 7, 2025 at 5:52 AM, Szentirmai Z. A/SSL : @FA CS AGV Jawad The EOL AGV#12 went too close to the wall at buffer#2. Please move it manually. Thank you June 7, 2025 at 5:57 AM, FA CS AGV David 데이비드 : Solved June 7, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.07. 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Boromisza Zoltán, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(1): 김지수 June 7, 2025 at 6:04 AM, Mohammad Amir : @Denkó Jani (F.A.) @FA Jó Reggelt, Please check is someone working on M0STK011_C01/C02 it is in Open door since 5:22 and several jobs are waiting. Thank you very much! June 7, 2025 at 6:05 AM, Szentirmai Z. A/SSL : Thank you June 7, 2025 at 6:09 AM, Denkó Jani (F.A.) : Going June 7, 2025 at 6:10 AM, 한상범(Han Sang Beom) : Please check the buffer#1 stacker crain Alarm : SEW FORK Y FAULT SRC DISCONNECTED ERROR @FA June 7, 2025 at 6:12 AM, Denkó Jani (F.A.) : Ok June 7, 2025 at 6:27 AM, Kurkó Péter : Helló a line7 en nézzetek rá a gantrykre meg az agv re nem igazán működik köszi June 7, 2025 at 6:27 AM, FA CS AGV David 데이비드 : I'm coming June 7, 2025 at 6:28 AM, Denkó Jani (F.A.) : Thx June 7, 2025 at 6:31 AM, FA CS AGV David 데이비드 : 1F? June 7, 2025 at 6:33 AM, Kurkó Péter : Yes June 7, 2025 at 6:49 AM, Denkó Jani (F.A.) : Solved June 7, 2025 at 6:55 AM, 한상범(Han Sang Beom) : Please check AGV#15 @FA June 7, 2025 at 7:01 AM, Gerbovits Kevin : Solved June 7, 2025 at 7:21 AM, 함희훈(HAM HEE HOON) : Please check AGV#10 @FA June 7, 2025 at 7:21 AM, FA CS AGV David 데이비드 : Coming June 7, 2025 at 7:26 AM, FA CS AGV David 데이비드 : Solved June 7, 2025 at 8:18 AM, 함희훈(HAM HEE HOON) : Please check AGV#13 @FA June 7, 2025 at 8:18 AM, FA CS AGV David 데이비드 : Ok coming June 7, 2025 at 8:24 AM, FA CS AGV David 데이비드 : Solved June 7, 2025 at 8:47 AM, 한상범(Han Sang Beom) : Empty Pallet is not being inserted in lines EOL 1,2,4,5. Please check. @FA June 7, 2025 at 8:47 AM, Mohammad Amir : Checking June 7, 2025 at 8:50 AM, Mohammad Amir : There is job for all the mentioned EOL lines 1,2,4,5. All these empty pallet are from M0STK011 and in Waiting state. @FA @Denkó Jani (F.A.) Please check M0STK011_C02 ,it is inactive since 7:50. Please make it in-service ,job execution will be faster. Thank you very much! June 7, 2025 at 8:51 AM, Denkó Jani (F.A.) : Checking June 7, 2025 at 9:05 AM, Denkó Jani (F.A.) : Solved June 7, 2025 at 9:05 AM, Mohammad Amir : Sir, Now issue has been resolved ✅. Pallets on the way to mentioned EOL line. For EOL-1 AGV#16 on the way ✅. I am monitoring. Thank you very much! June 7, 2025 at 9:05 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 9:18 AM, Nikolett SL/B EOL : Sziasztok ismét nem hozza az Agv az üres palettát a sorokra rá tudnátok nézni kérlek Köszönöm June 7, 2025 at 9:18 AM, Mohammad Amir : Sure, I am checking. Please tell me which line you are facing issues. Thank you very much! June 7, 2025 at 9:19 AM, Nikolett SL/B EOL : 1,2,4,5,6 line June 7, 2025 at 9:21 AM, Mohammad Amir : For EOL-2 ,AGV#9 EOL-6,AGV#14 And for EOL-5 ,Empty pallet S000687 on the way. Checking for 1&4. Thank you very much! June 7, 2025 at 9:23 AM, Mohammad Amir : For EOL-1 &4 , Please press Load Request. Thank you very much! June 7, 2025 at 9:25 AM, 배병민 (Bae Byoungmin) : Jobs are piling up in Cellbuffer Warehouse #1. They are being delivered sequentially, so please wait a moment. June 7, 2025 at 9:31 AM, 배병민 (Bae Byoungmin) : @Mohammad Amir All Empty currently being supplied to the EOL port is being returned only to Warehouse Port 1 via the bridge. Please check why it is not being returned to Warehouse 3. June 7, 2025 at 9:33 AM, Mohammad Amir : Sure Sir, I am checking. June 7, 2025 at 9:58 AM, Mohammad Amir : Sir, It has started to return from warehouse #3 as well. ✅ I am monitoring. Thank you very much! June 7, 2025 at 9:59 AM, 배병민 (Bae Byoungmin) : Yes, the cargo is currently being returned from warehouse 3. Has there been any change? June 7, 2025 at 10:08 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @정낙정(JEONG NAK JEONG) @유경호(RYU KYEONGHO) 현재 셀버퍼 창고#2,4 의 적재율이 98% 이상입니다. 90%이상이 Full PLT이며, 박스 포장기 가동을 계속적으로 해야할것 같습니다. 현재 주간 박스포장기는 생산을 안하고 있습니다 June 7, 2025 at 10:09 AM, 배병민 (Bae Byoungmin) : 2,4번 창고 적재율 98% 이상으로 해체기 PLT가 입고되지 못하여 밀려있는 상황입니다 June 7, 2025 at 10:15 AM, Mohammad Amir : Dear Sir, According to my analysis,These pallets are being returned based on last track out time at the moment as now pallets are also available based on last track out time from warehouse #3 along with warehouse#1 ,during that time most pallet were available from warehouse #1 based on last track out time that's why it came from warehouse #1 . I am investigating more and monitoring if such phenomenon occures again. For now everything is normal ✅. Thank you very much! June 7, 2025 at 10:15 AM, 배병민 (Bae Byoungmin) : Thank you^^ June 7, 2025 at 10:16 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 10:16 AM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 박스 포장기로 출고 시작되었습니다 June 7, 2025 at 10:16 AM, Mohammad Amir : You are welcome Sir! June 7, 2025 at 11:15 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 11:17 AM, Mohammad Amir : Dear Sir, Based on my investigation findings:- There is no abnormalities found ,just carriers are being returned based on last track out time as i mentioned earlier. For example:- EOL-5:- As according to track out time the carriers were in this way :- last track out time. Carrier. STK 2025-06-05 17:25 S000721. #3 2025-06-05 17:27. S000722 #1 So, first S000721 released from warehouse #3 afterwards S000722 from warehouse #1 released. June 7, 2025 at 11:17 AM, Mohammad Amir : During that time as according to last track out time most carriers were available from STK#1 that's why empty pallet came from STK#1 mostly. I am constantly monitoring the whole area. Thank you very much! June 7, 2025 at 11:36 AM, 함희훈(HAM HEE HOON) : Please check AGV#14 @FA June 7, 2025 at 11:37 AM, FA CS AGV David 데이비드 : Coming June 7, 2025 at 11:42 AM, FA CS AGV David 데이비드 : Solved June 7, 2025 at 11:54 AM, 함희훈(HAM HEE HOON) : If the solution is not found, please check again 14 times. June 7, 2025 at 1:13 PM, Vadász Dóra SSL/B : Sziasztok! Box packingon a vetkőztető gépet nézzétek meg kérlek. Köszönöm June 7, 2025 at 1:13 PM, Gerbovits Kevin : Megyünk June 7, 2025 at 1:24 PM, Nikolett SL/B EOL : Hello Z100999 MES0019 error Boxpacking June 7, 2025 at 1:45 PM, Nikolett SL/B EOL : Sziasztok Boxpackingon probléma van a szétszedő részével is valaki tudna menni ? Köszönöm June 7, 2025 at 2:05 PM, Denkó Jani (F.A.) : Már jelezték hogy hiba van,mi is jeleztük hogy itt megyünk, jelenleg is itt vagyunk June 7, 2025 at 2:07 PM, Nikolett SL/B EOL : Akkor csak azt nem jelezték hogy nektek is jelezve lett 😪 June 7, 2025 at 2:08 PM, 배병민 (Bae Byoungmin) : I will go June 7, 2025 at 2:10 PM, Denkó Jani (F.A.) : A @Vadász Dóra SSL/B írta 2 üzenettel elötted 😂picit pörgess vissza 🙄 June 7, 2025 at 2:12 PM, Nikolett SL/B EOL : Az oké csak az operator meg jön oda hogy nincs ott senki és szóljak 😅 June 7, 2025 at 2:16 PM, Vadász Dóra SSL/B : Istenke ad és elvesz 🥲🫠😅 June 7, 2025 at 2:17 PM, Denkó Jani (F.A.) : Az mondjuk erős 😂😂 June 7, 2025 at 2:36 PM, 배병민 (Bae Byoungmin) : Everything worked fine. June 7, 2025 at 2:38 PM, Gerbovits Kevin : Solved June 7, 2025 at 2:38 PM, Denkó Jani (F.A.) : Kész van 🫡😉 June 7, 2025 at 3:48 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @정낙정(JEONG NAK JEONG) @유경호(RYU KYEONGHO) 현재 Cell 완제품 창고에 Empty PLT 59set 재공있습니다. 앞으로 박스 해체기는 새벽 4시경 (12h 정도 이후) 재공 소진으로 비가동 될것으로 예상 됩니다. 참고 부탁드립니다. June 7, 2025 at 5:04 PM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 박스포장기 출고 Job이 없는데 확인 부탁드립니다. June 7, 2025 at 5:06 PM, Mohammad Amir : Sir, We are receiving LR but it shows there is no material available which can be transfer. Thank you very much! June 7, 2025 at 5:07 PM, Mohammad Amir : Sir:- Update :- Just now 2 materials are available. So now jobs have been created as now material available. R200360 on the way from Warehouse #4. Thank you very much! June 7, 2025 at 5:07 PM, 한상범(Han Sang Beom) : 출고명령 걸어두었습니다. June 7, 2025 at 5:08 PM, 배병민 (Bae Byoungmin) : 넵 방금 1개 생성 확인 되었습니다 감사합니다 June 7, 2025 at 5:10 PM, Mohammad Amir : Sir, For you information:- Currently available materials for F0BPM011(-P02){Cell Packing Short }:-19 For Long(P01) :- 0 As now material available for short so currently 3 jobs are in the way to F0BPM011_P02. ✅ Thank you very much! June 7, 2025 at 6:03 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+2: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 7, 2025 at 6:24 PM, Szentirmai Z. A/SSL : Hello! Cell buffer#2 - C/V#2 AGV PIO interface error AGV#16 - Work data mismatch error. June 7, 2025 at 6:25 PM, FA CS AGV Jawad : Solvef June 7, 2025 at 8:49 PM, Tklcz Alexandra SL/A : Hi! MOSTK013-STK-OP#3 error. Near EOL3 June 7, 2025 at 9:00 PM, Csepi Árpád : Solved June 8, 2025 at 12:37 AM June 8, 2025 at 12:37 AM, Tklcz Alexandra SL/A : Hi! MOSTK011-STK-OP#2 error. Near EOL 10 June 8, 2025 at 12:42 AM, Csepi Árpád : Az M0STK011-STK daru hibajavítása folyamatban van. June 8, 2025 at 12:42 AM, Tklcz Alexandra SL/A : Rendben, köszi! June 8, 2025 at 12:45 AM, Tklcz Alexandra SL/A : AGV16 error, EOL 3 buffer June 8, 2025 at 12:45 AM, FA CS AGV Jawad : I check it June 8, 2025 at 12:46 AM, FA CS AGV Jawad : Solved June 8, 2025 at 1:01 AM, Csepi Árpád : Solved June 8, 2025 at 1:24 AM, FA CS AGV Jawad : @Csepi Árpád can you plz help again...same error at STK 1q June 8, 2025 at 3:17 AM, VK (mcs) : @FA Please check Cell buffer M0STK013 -P07 Z101271 doesn't transferred. Destination is M0STK014 June 8, 2025 at 3:52 AM, Tklcz Alexandra SL/A : Boxpacking side cover error, please check. June 8, 2025 at 3:57 AM, Szentirmai Z. A/SSL : @Csepi Árpád @Édl Tamás @Brázik János June 8, 2025 at 4:10 AM, Tklcz Alexandra SL/A : EOL AGV13 error, near 3L. June 8, 2025 at 4:16 AM, FA CS AGV Jawad : I check June 8, 2025 at 4:28 AM, Csepi Árpád : Solved The empty pallet has been stored in the M0STK013 warehouse. ID: Z101271 Storage location: 0200402 June 8, 2025 at 4:29 AM, VK (mcs) : Thank you very much June 8, 2025 at 4:30 AM, Csepi Árpád : You’re welcome! June 8, 2025 at 4:55 AM, Csepi Árpád : Solved June 8, 2025 at 5:01 AM, Szentirmai Z. A/SSL : Photo June 8, 2025 at 6:11 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.08. 8+3+1/12+1 Tech, 1Sl, 1Sup. Overtime(3): Szabadi Miklós, Marsi Gábor, Harasztia Zoltán Holiday(1+1): Gerbovits Kevin, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(1): Böröczki Balázs --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Marsi Gábor --------------- Assy GF (3): Csanálosi Gábor, Denkó János, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes ---------- June 8, 2025 at 8:55 AM, 한상범(Han Sang Beom) : Please check AGV18 @FA June 8, 2025 at 8:55 AM, FA CS AGV David 데이비드 : Checking June 8, 2025 at 9:17 AM, SKOH2/제조-셀,모듈 출하/김병호 : 1. FACS_team @배병민 (Bae Byoungmin) 남측 셀 도크장 입구포트 GF M0CNV036_58_023 레일에서 제품이 붙었습니다. 빠른확인 바랍니다 June 8, 2025 at 9:18 AM, Zoltán Harasztia FA : Cheking June 8, 2025 at 9:21 AM, Zoltán Harasztia FA : Solved June 8, 2025 at 9:32 AM, Vadász Dóra SSL/B : Sziasztok! Box packingon a vetkőztető "szatír" gépnél szenzorhiba. Nézzétek meg, kérlek. Köszönöm June 8, 2025 at 9:38 AM, Boromisza Zoltán : Oké June 8, 2025 at 10:01 AM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 Cell 완제품창고#34 S/C 이동 및 동작 속도를 30% 정도 증대시켜 뒀습니다. 출고하는데 많이 해소가 될것입니다. June 8, 2025 at 10:01 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 June 8, 2025 at 10:02 AM, Vadász Dóra SSL/B invited Fehérvári Géza SL/B. June 8, 2025 at 10:04 AM, 배병민 (Bae Byoungmin) : @Zoltán Harasztia FA M0CNV36_58_023 Error June 8, 2025 at 10:05 AM, SKOH2/제조-셀,모듈 출하/김병호 : 2. FACS_team @배병민(Bae Byoungmin) 남측 셀 도크장 입구포트 GF M0CNV036_58_023 레일에서 제품이 붙었습니다. 같은 구역입니다 빠른확인 바랍니다 June 8, 2025 at 10:06 AM, Zoltán Harasztia FA : Coming June 8, 2025 at 10:06 AM, Boromisza Zoltán : Kész June 8, 2025 at 10:31 AM, SKOH2/제조-셀,모듈 출하/김병호 : @정낙정(JEONG NAK JEONG) @[민겸]MinGyum @배병민 (Bae Byoungmin) 6/6일 셀 포장기에서 완제품창고로 base id : R200345 제품 입고 되었는데 하단 plt만 전산이 넘어 오고 상단제품은 가입고 상태입니다. 해당 제품 pair plt 상단 (R200324) WMS 박스포장기 결과 내역에서도 검색이 안됩니다. 해당건 메일 드리오니 확인 부탁드립니다. June 8, 2025 at 10:50 AM, 정낙정(JEONG NAK JEONG) : 확인해보겠습니다 June 8, 2025 at 11:46 AM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 박스 포장기 출고 Job이 없는데 확인 부탁드립니다. June 8, 2025 at 11:48 AM, 배병민 (Bae Byoungmin) : @SKOH2/제조-셀,모듈 출하/김병호 주임님 명일 남측 Cell 완제품 입/출고 작업 있으실까요? June 8, 2025 at 11:50 AM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 8, 2025 at 11:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : 명일은 입/출고 작업이 없습니다. PM님 금일 셀트레이 입고 및 셀 완제품 배출 작업 마무리 했습니다. 빠른 현장 지원 감사드립니다. June 8, 2025 at 11:51 AM, 배병민 (Bae Byoungmin) : 네 감사합니다 그럼 명일 남측 도크장 물류 C/V level 조정좀 진행하겠습니다 감사합니다 June 8, 2025 at 11:51 AM, SKOH2/제조-셀,모듈 출하/김병호 : 넵 June 8, 2025 at 2:33 PM, Vadász Dóra SSL/B : Sziasztok Box packing címkéző ledobta a láncot. Nézzetek rá, kérlek June 8, 2025 at 2:33 PM, Boromisza Zoltán : Megyünk June 8, 2025 at 2:40 PM, Zoltán Harasztia FA : Kész June 8, 2025 at 3:25 PM, FA CS AGV David 데이비드 : Can someone please check stk11_po4 Cv data mismatch error and fork right overrun detect. @FA June 8, 2025 at 3:26 PM, Zoltán Harasztia FA : Cheking June 8, 2025 at 4:14 PM, 한상범(Han Sang Beom) : Please check AGV18 @FA June 8, 2025 at 4:30 PM, Kurkó Péter : Hello Pls check 1f line7 dunnage agv Thx June 8, 2025 at 4:31 PM, FA CS AGV David 데이비드 : Okay I'm going June 8, 2025 at 4:40 PM, FA CS AGV David 데이비드 : Solved June 8, 2025 at 5:16 PM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 셀버퍼창고#1 1번 크레인 오류로 점검 및 조치 중입니다. 시간이 조금 소요될듯 합니다. 조치후 공유 드리겠습니다 June 8, 2025 at 5:18 PM, 한상범(Han Sang Beom) : 네 알겠습니다. June 8, 2025 at 5:32 PM, 요셉 : EOL 5L Please move the agv to the side, the empty part won't fit June 8, 2025 at 5:33 PM, FA CS AGV Jawad : I do June 8, 2025 at 5:46 PM, Kurkó Péter : Hello again June 8, 2025 at 5:48 PM, FA CS AGV Jawad : I check it June 8, 2025 at 5:55 PM, FA CS AGV Jawad : Done. AGVs have been moved and AGV has done its job ( pallets unloaded) June 8, 2025 at 6:06 PM, 배병민 (Bae Byoungmin) : 1번창고 조치 완료되어 정상 가동중입니다 June 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 3 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+3: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 8, 2025 at 6:26 PM, Tklcz Alexandra SL/A : Hi! No material arrives for boxpacking. Please check the buffers. June 8, 2025 at 6:26 PM, Mohammad Amir : Checking! June 8, 2025 at 6:28 PM, Mohammad Amir : There was an issue with last job . Coudk you please press LR again. Thank you very much! June 8, 2025 at 6:31 PM, 배병민 (Bae Byoungmin) : There are a lot of jobs at Crane 1, so that's why. It will be resolved soon. June 8, 2025 at 6:32 PM, Mohammad Amir : Dear Sir, Last job was terminated by Operator and currently we don't have any LR that's why there is no job exists at the moment. I already requested operations to press LR. Thank you very much! June 8, 2025 at 6:36 PM, Mohammad Amir : Dear Sir, Update :- LR received successfully at 18:33 and now jobs have been created successfully. Three materials on the way. ✅. Currently available materials for F0BPM011(-P02){Cell Packing Short }:-25 Thank you very much! June 8, 2025 at 6:36 PM, Mohammad Amir : @FA CS AGV Jawad @Tklcz Alexandra SL/A For your information! Thank you very much! June 8, 2025 at 6:36 PM, 배병민 (Bae Byoungmin) : Yes, I just submitted my request to LR. Thank you. June 8, 2025 at 6:37 PM, Mohammad Amir : Thank you very much Sir. 🙏 June 8, 2025 at 6:49 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK011_C02 ,it is inactive for long time . Please make it active ,job execution for box packing and EOL will be faster currently just C01 is active that's why there is delay. Thank you very much! June 8, 2025 at 6:51 PM, FA CS AGV Jawad : @Mohammad Amir is there any inconsistency bw ACS & MCS 1F, End product...? Can you plz hve a look ? If you can find something specially at M7MFA300_P06 June 8, 2025 at 6:52 PM, Mohammad Amir : Sure ,Checking. June 8, 2025 at 6:55 PM, Tklcz Alexandra SL/A : Near EOL9 AGV8 error. June 8, 2025 at 6:56 PM, Mohammad Amir : Currently for P06 there exists a job on AGV#6 with empty pallet U023687 . I checked for both MCS and ACS ,data is same ✅ Please let me know if face any issues. Thank you very much! June 8, 2025 at 6:58 PM, FA CS AGV Jawad : AGV 06 has just unloaded pallet, issue is AGV doesnt move after finishing job, though, AGV behind it has a job at same port. June 8, 2025 at 6:58 PM, FA CS AGV Jawad : OMW June 8, 2025 at 7:00 PM, FA CS AGV Jawad : Port is preoccupied, AGV is waiting port to be emptied June 8, 2025 at 7:01 PM, Mohammad Amir : After unloading,As i checked currently there is no job for the port P06_M7MFA300 in MCS nor in ACS. I am monitoring for any inconsistency. Thank you very much! June 8, 2025 at 7:01 PM, FA CS AGV Jawad : Not now, but it happens. June 8, 2025 at 7:02 PM, Mohammad Amir : Sure ,I am monitoring. Thank you very much! June 8, 2025 at 7:30 PM, Mohammad Amir : @Csepi Árpád Please check M0STK011_C02 again inactive without errors since 19:08. Thank you very much! June 8, 2025 at 7:31 PM, 배병민 (Bae Byoungmin) : It is not disabled, because all command positions are at crane position 1. June 8, 2025 at 7:31 PM, Mohammad Amir : Sir, Thank you very much for informing me. June 8, 2025 at 8:01 PM, Tklcz Alexandra SL/A : EOL6 AGV10 error. June 8, 2025 at 8:01 PM, FA CS AGV Jawad : Following June 8, 2025 at 8:46 PM, Tklcz Alexandra SL/A : Boxpacking agv please check. June 8, 2025 at 8:46 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @정낙정(JEONG NAK JEONG) @유경호(RYU KYEONGHO) 현시간부로 Cell 완제품 창고의 Empty PLT는 전체 재공 소진되었습니다. 명일은 공휴일인 관계로 Empty PLT 입고는 없다고 합니다. 금일 야간 부터~차주 화요일 주간까지 박스 해체기는 재공 소진으로 비가동 예정이며, 박스포장기 포장 자재는 수동 투입 진행이 필요하겠습니다. 감사합니다. June 8, 2025 at 8:47 PM, FA CS AGV Jawad : There is no error, just port is occupied with pallets June 8, 2025 at 10:39 PM, 요셉 : Eol agv #15 check plz June 8, 2025 at 10:39 PM, FA CS AGV Jawad : Coming down June 8, 2025 at 10:39 PM, FA CS AGV Jawad : I check June 8, 2025 at 10:40 PM, 요셉 : M0stk013-stk-op#3 CRC3 c/v#01 light curtain error Check plz June 8, 2025 at 10:53 PM, 요셉 : @FA CS AGV Jawad thank you June 8, 2025 at 10:56 PM, FA CS AGV Jawad : Always welcome sir June 9, 2025 at 2:36 AM June 9, 2025 at 2:36 AM, Tklcz Alexandra SL/A : Hi! Buffer1 error, please someone checking. June 9, 2025 at 2:56 AM, 정지윤 left this chatroom. June 9, 2025 at 4:18 AM, FA CS AGV Jawad : @Csepi Árpád can you plz help again at STK 11..? June 9, 2025 at 4:18 AM, Tklcz Alexandra SL/A : Az 1 Buffer hibán áll, kérlek ellenőrizzétek. June 9, 2025 at 4:32 AM, Brázik János : Solved June 9, 2025 at 4:33 AM, FA CS AGV Jawad : Thank you June 9, 2025 at 5:43 AM, Baek Hojong(백호종)FA : Day Shift 06.09 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 9, 2025 at 6:29 AM, R. József C SL EOL : Jó reggelt Boxpackingra kérnék segítséget 1-es pántolónál probléma van June 9, 2025 at 6:30 AM, Zoltán Harasztia FA : Megyünk June 9, 2025 at 6:50 AM, Halász György SL : Good morning, Modul 1F line7 LWR case gantry error June 9, 2025 at 6:52 AM, Döme György F.A : Megyünk June 9, 2025 at 6:54 AM, Halász György SL : Köszi June 9, 2025 at 7:29 AM, Döme György F.A : Kész June 9, 2025 at 8:33 AM, FACS_JaewonShin : ■ 9th June Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 5 people - Team leader 1 Shin jaewon - Mechanic 1 Oh changhoon - PLC control 3 Kim bareum Jin jaejeong Kim sangtae June 9, 2025 at 10:20 AM, Halász György SL : Sziasztok, Kézi porszívót szeretnék elkérni. Modul Line7 re Köszönjük June 9, 2025 at 10:21 AM, Sarvajcz Ferenc FA : Viszem June 9, 2025 at 11:20 AM, R. József C SL EOL : I would like to ask for help with the packaging. 1. There is a welding problem with the strapping 2. the tensioning motor is running continuously first strapping right side June 9, 2025 at 11:20 AM, R. József C SL EOL : Segítséget szeretnék kérni a csomagolással kapcsolatban. 1. Hegesztési probléma van a pántolással. 2. a feszítőmotor folyamatosan jár. első pántolás jobb oldalon. June 9, 2025 at 11:21 AM, Zoltán Harasztia FA : Már szóltam az facs- embereknek June 9, 2025 at 11:21 AM, R. József C SL EOL : Köszönöm June 9, 2025 at 11:43 AM, Shakir (MCS) : @FA Please check M0STK011 Crane fork right over run detect. Thank you June 9, 2025 at 11:44 AM, Döme György F.A : Checking June 9, 2025 at 11:44 AM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin 확인 같이 해주세요 June 9, 2025 at 11:52 AM, Döme György F.A : Solved June 9, 2025 at 1:14 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 9, 2025 at 1:15 PM, Zoltán Harasztia FA : Megyünk June 9, 2025 at 1:26 PM, Zoltán Harasztia FA : Kész June 9, 2025 at 1:39 PM, R. József C SL EOL : Köszönöm June 9, 2025 at 2:15 PM, Halász György SL : Hi, Modul 1F line7 AGV alarm June 9, 2025 at 2:15 PM, FA/CS/AGV_ Asjad : Checking June 9, 2025 at 2:17 PM, Halász György SL : Thanks June 9, 2025 at 2:20 PM, FA/CS/AGV_ Asjad : Solved June 9, 2025 at 2:22 PM, 정낙정(JEONG NAK JEONG) : @fa cell buffer M0STK012_C01 crane shelf in abort(doube cargo) occurred. June 9, 2025 at 2:25 PM, Sarvajcz Ferenc FA : Solved June 9, 2025 at 2:34 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget June 9, 2025 at 2:34 PM, R. József C SL EOL : Köszi June 9, 2025 at 2:34 PM, Sarvajcz Ferenc FA : Ok June 9, 2025 at 2:41 PM, Zoltán Harasztia FA : Kész June 9, 2025 at 3:20 PM, R. József C SL EOL : Cellbuffer 1 Nézzétek meg kérlek Cím 1505 crane move timeout error June 9, 2025 at 3:22 PM, R. József C SL EOL : Smc#1 fork right timeout error June 9, 2025 at 3:27 PM, Döme György F.A : Megyünk June 9, 2025 at 3:28 PM, R. József C SL EOL : K June 9, 2025 at 3:28 PM, R. József C SL EOL : Köszönöm June 9, 2025 at 3:41 PM, Halász György SL : Hi, Modul 1F line7 at the Dock AGV alarm June 9, 2025 at 3:42 PM, Döme György F.A : Kész June 9, 2025 at 3:42 PM, Boromisza Zoltán : Megyek June 9, 2025 at 3:42 PM, FA/CS/AGV_ Asjad : Coming June 9, 2025 at 3:43 PM, FA/CS/AGV_ Asjad : Solved June 9, 2025 at 3:44 PM, R. József C SL EOL : Nézzétek meg kérlek miért nem viszi a palettákat bufferből a boxpackingra June 9, 2025 at 3:44 PM, Halász György SL : Thanks June 9, 2025 at 3:44 PM, R. József C SL EOL : Köszönöm June 9, 2025 at 5:47 PM, R. József C SL EOL : Boxpackingra kérnék segítséget ismét 😅 June 9, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13+2 Overtime Overtime (2):Csanálosi Gábor, Bonnyai Ákos Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Bonnyai Ákos, Csanálosi Gábor Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 9, 2025 at 6:11 PM, R. József C SL EOL : Megoldva June 9, 2025 at 8:58 PM, Éváné Bori Viktória : Sziasztok! A BOX packingen segítségre van szükségünk. A második nyomtatóval probléma van. @N.Gábor F.A. June 9, 2025 at 8:58 PM, N.Gábor F.A. : Megyünk June 9, 2025 at 10:18 PM, Szijjártó Balázs : 1F Line 7 endplate gantry szórakozik... Vision correction value NG. Én már nem tudok mit kezdeni vele. Köszi! June 9, 2025 at 10:18 PM, N.Gábor F.A. : Meg lesem June 9, 2025 at 10:22 PM, 배병민 (Bae Byoungmin) : @FACS_TaehyeongJin 주임님 같이 확인 부탁드립니다 June 9, 2025 at 10:25 PM, FACS_TaehyeongJin : 확인하겠습니다 June 9, 2025 at 10:41 PM, Éváné Bori Viktória : Sziasztok! Box packingre kérnék segítséget. A fedél rárakónál van a probléma. @N.Gábor F.A. @Dávid F.A. June 9, 2025 at 10:57 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 C/V light curtain detect June 9, 2025 at 10:58 PM, Dávid F.A. : Solved! June 9, 2025 at 11:05 PM, Dávid F.A. : Solved! June 9, 2025 at 11:14 PM, FACS_TaehyeongJin : 비전과 PLC간 통신문제로 보이며 이더넷 허브 결선 상태 점검 하였습니다 금일 생산은 종료되었고 내일 06:00부터 생산 예정이라고 쉬프트 리더로 부터 확인하였습니다 현재 통신은 이상없으며 내일 모니터링 진행하겠습니다 June 9, 2025 at 11:21 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 주간팀에서도 계속적으로 모니터링될수있게 공유 부탁드립니다. 감사합니다 June 9, 2025 at 11:43 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 C/V data miss match June 9, 2025 at 11:43 PM, N.Gábor F.A. : Checking June 10, 2025 at 12:07 AM June 10, 2025 at 12:07 AM, 원승연(Seungyeon Won) : Box packing T704977이 투입되었는데 확인 부탁드립니다. Box packing T704977 has been loaded. Please check and confirm why it was loaded. June 10, 2025 at 12:55 AM, 원승연(Seungyeon Won) : AGV 16 plz check June 10, 2025 at 12:55 AM, FA-CS-AGV-Masoud : Coming June 10, 2025 at 12:57 AM, FA-CS-AGV-Masoud : Solved June 10, 2025 at 1:20 AM, 원승연(Seungyeon Won) : Thanks June 10, 2025 at 6:40 AM, Balázs Róbert SL : Line7 TR-op#1 Station,vision correction value NG. Can you help me PLC June 10, 2025 at 6:41 AM, Zoltán Harasztia FA : Megyünk June 10, 2025 at 6:44 AM, R. József C SL EOL : Jó reggelt Boxpacking elindul Egyenlőre 42 paletta Ennyi oldalburkolat van Kamion ha megjön, utána folyamatosan fog menni June 10, 2025 at 6:51 AM, Zoltán Harasztia FA : Kész June 10, 2025 at 6:53 AM, Balázs Róbert SL : Thx June 10, 2025 at 10:19 AM, R. József C SL EOL : Boxpackingon pántolónál probléma van tegnapihoz hasonló, koreai kollégák már ott vannak June 10, 2025 at 10:20 AM, Döme György F.A : Megyünk June 10, 2025 at 1:58 PM, Sási Zsolt SL/C/ EOL : 13as AGVt kérlek küldjétek tovább. June 10, 2025 at 1:59 PM, Sási Zsolt SL/C/ EOL : Done June 10, 2025 at 3:45 PM, Balázs Róbert SL : Line7 TR-op#1 Station,vision correction value NG. Please check June 10, 2025 at 3:46 PM, Zoltán Harasztia FA : Megyek June 10, 2025 at 4:11 PM, R. József C SL EOL : 8-as agv útban van Kérlek küldjétek el másik pozícióra June 10, 2025 at 4:11 PM, R. József C SL EOL : Eol 9-10 között June 10, 2025 at 4:14 PM, FA/CS/AGV_ Asjad : Done June 10, 2025 at 4:20 PM, R. József C SL EOL : Thanks June 10, 2025 at 4:26 PM, R. József C SL EOL : 14 agv plz again June 10, 2025 at 4:28 PM, FA/CS/AGV_ Asjad : Done June 10, 2025 at 5:25 PM, SKOH2/제조-셀,모듈 출하/김병호 : MCS/RTD team @배병민 (Bae Byoungmin) M9CNV036_M01 carrier id : Z101377 CCS doesn't create jobs. Please check June 10, 2025 at 5:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : I want you to make a job with the 35th bank and put it in. June 10, 2025 at 5:30 PM, SKOH2/제조-셀,모듈 출하/김병호 : Our cell tray inventory work has been delayed a lot. I hope you check it quickly June 10, 2025 at 5:31 PM, duzzaman Md (MCS) : Job created and moving. June 10, 2025 at 6:06 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 10, 2025 at 6:30 PM, FACS_Hyeongi Son : @MCS Hello Can you move this product? Z101393 M0CNV036_L/F01->M0CNV036_P14 June 10, 2025 at 6:31 PM, Mohammad Amir : Sure Sir,checking . June 10, 2025 at 6:33 PM, Mohammad Amir : Issue has been resolved successfully ✅. Please make M0CNV036 in -service currently it is OOS afterwards this carrier will started to move. I am monitoring. Thank you very much! June 10, 2025 at 6:34 PM, FACS_Hyeongi Son : It's in service now June 10, 2025 at 6:35 PM, Mohammad Amir : Sure Sir Checking June 10, 2025 at 6:40 PM, Mohammad Amir : Sir, Please move manually. from MCS side ,job creation is getting terminated. Thank you very much! June 10, 2025 at 6:41 PM, FACS_Hyeongi Son : I'll try June 10, 2025 at 6:41 PM, Mohammad Amir : Thank you very much! June 10, 2025 at 6:46 PM, Mohammad Amir : This message was deleted. June 10, 2025 at 6:47 PM, Mohammad Amir : Sir, Now location has been changed ,let me try once again for this carrier. Thank you very much! June 10, 2025 at 6:47 PM, FACS_Hyeongi Son : It’s okay I solved it June 10, 2025 at 6:47 PM, FACS_Hyeongi Son : Thank you:) June 10, 2025 at 6:48 PM, Mohammad Amir : @FACS_Hyeongi Son Issue has resolved and carrier has started to move to M0CNV036_P14 ✅. Thank you! June 10, 2025 at 6:48 PM, Mohammad Amir : You are welcome! June 10, 2025 at 6:55 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M7MFA300_P28 June 10, 2025 at 6:56 PM, N.Gábor F.A. : Okay checking June 10, 2025 at 7:09 PM, FA-CS-AGV-Masoud : @Mohammad Amir Please create job for the carrier PS230_250603019 in line 6,7 for the same destination, we had to cancel it because of port problem now wee need to check it again June 10, 2025 at 7:09 PM, Mohammad Amir : Checking June 10, 2025 at 7:16 PM, Mohammad Amir : Please confirm is carrier id PS230-2506030109? I found for this job was cancelled. Thank you very much! June 10, 2025 at 7:16 PM, FA-CS-AGV-Masoud : Yes it’s right June 10, 2025 at 7:16 PM, Mohammad Amir : Thank you very much for the confirmation. June 10, 2025 at 7:19 PM, Mohammad Amir : Issue has been resolved ✅. Thank you! June 10, 2025 at 7:20 PM, FA-CS-AGV-Masoud : Thank you June 10, 2025 at 7:20 PM, Mohammad Amir : You are welcome! June 10, 2025 at 8:20 PM, Szabolcs : @FA M0CNV036_58_023 plorblem. Check please. June 10, 2025 at 8:20 PM, Mohammad Amir : There is Work data error. @N.Gábor F.A. please check. Thank you very much! June 10, 2025 at 8:22 PM, Éváné Bori Viktória : Helló! Eol 9 palett not comming. Please check the AGV's June 10, 2025 at 8:22 PM, Mohammad Amir : Checking June 10, 2025 at 8:24 PM, N.Gábor F.A. : Okay, checking June 10, 2025 at 8:25 PM, Mohammad Amir : @FA @Dávid F.A. Please check Z101257 it is located at M0STK013(0202306) it has job to go to EOL-9,it is not moving since 19:35. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! June 10, 2025 at 8:40 PM, Dávid F.A. : @Mohammad Amir Good evening! The inspection has been done, the palette is physically there! I checked it with a camera! June 10, 2025 at 8:45 PM, Dávid F.A. : @Mohammad Amir I moved a warehouse manual task from one location to another.. from local 0202306 to local 0202105... now the pallet is currently 0202306! There is no problem with the warehouse! June 10, 2025 at 8:46 PM, Mohammad Amir : Hello, Please press LR for EOL-9 ,last job for EOL-9 ,Z101257 has been cancelled by Operator. Thank you very much! June 10, 2025 at 8:48 PM, Mohammad Amir : Yes ,i checked. Thank you very much! Actually this carrier was not moving for last one hour however at the same time from the same STK013 job for EOL-10 was created and it moved while Z101257 was still not moving however for this job was created at 19:35. That's why I told you to inspect the location as Job was still in Queued and job created after it was moved. Thank you very much! June 10, 2025 at 8:51 PM, Szijjártó Balázs : Module Line 7 (1F) No.#3 AGV on charger with the following error: "Charger bar detect sensor off alarm" June 10, 2025 at 8:51 PM, FA-CS-AGV-Masoud : Coming June 10, 2025 at 8:53 PM, 원승연(Seungyeon Won) : We did not cancel the command manually. What should I do now? June 10, 2025 at 8:55 PM, Mohammad Amir : Dear @원승연(Seungyeon Won) Are you referring to EOL-9 ? Thank you very much! June 10, 2025 at 8:59 PM, FA-CS-AGV-Masoud : Solved June 10, 2025 at 9:01 PM, Szijjártó Balázs : Újabb gantry probléma a Line 7-en... UPR case. Axis #2 Y2 +limit error Axis #1 Y1 +limit error Valaki segítsen pls! June 10, 2025 at 9:01 PM, 원승연(Seungyeon Won) : Yes June 10, 2025 at 9:01 PM, Mohammad Amir : Please press LR ,issue will be resolved. Thank you very much! June 10, 2025 at 9:08 PM, 원승연(Seungyeon Won) : Sry I did not understand what LR means. June 10, 2025 at 9:08 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK035 크레인 정지 입니다 빠른 확인 바랍니다 June 10, 2025 at 9:09 PM, Mohammad Amir : Please press Load request(request of materials). Thank you very much! June 10, 2025 at 9:10 PM, FACS_Hyeongi Son : 넵 이동중입니다 June 10, 2025 at 9:12 PM, Mohammad Amir : Update:- LR received successfully at 21:08. Materials Z101319 on the way ✅ on the AGV#10. Thank you very much! June 10, 2025 at 9:12 PM, Mohammad Amir : For EOL-9. June 10, 2025 at 9:14 PM, Dávid F.A. : Thanks for warning me! June 10, 2025 at 9:14 PM, Mohammad Amir : Nagyon Szívesen! June 10, 2025 at 9:15 PM, 원승연(Seungyeon Won) : Okay June 10, 2025 at 9:35 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team M0STK035 크레인 재가동 오래 걸리실까요? 저희 출하인원들이 10시 퇴근이라서요. 입고작업 인원이 없습니다. 명일 출하 작업전 셀트레이 입고 작업 마무리 해야 하는데 아직 80plt 남아 있어서요. June 10, 2025 at 9:42 PM, 배병민 (Bae Byoungmin) : 어떤 상황인지 공유한번 부탁드립니다 June 10, 2025 at 9:43 PM, FACS_Hyeongi Son : 지금 콜렙스 센서 점검 중인데 교체해야할것 같습니다… 그래서 혹시 금일 남은 작업 명일 가능하실까요..? June 10, 2025 at 9:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : 명일 8시 출하인데 명일 출하제품 배출도 못한상태라 금일 마무리 작업해야합니다 June 10, 2025 at 9:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : 교체시간 오래 걸리시는걸가요?? June 10, 2025 at 9:45 PM, 배병민 (Bae Byoungmin) : 35번창고 정지해두고 컨베어 자재들 34번 창고로 매뉴얼 투입 가능할까요? June 10, 2025 at 9:47 PM, FACS_Hyeongi Son : 잡생성을 34번으로 해주시면 가능합니다 그러면 10시이후에 저희가 센서 교체하면 됩니다 June 10, 2025 at 9:47 PM, SKOH2/제조-셀,모듈 출하/김병호 : 34번으로 투입 가능하면 변경 부탁드립니다. 셀토크 평치에 셀트레이가 다 깔려 있어 어떻게 할 방법이 없습니다. June 10, 2025 at 9:49 PM, 배병민 (Bae Byoungmin) : 35번 가동가능하니 조금만 기다려주세요 통화됬습니다 June 10, 2025 at 9:51 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다. 저희도 잔업인원 대기 시키겠습니다. June 10, 2025 at 9:52 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M7MFA300_P33 Lift up/down error June 10, 2025 at 9:55 PM, FACS_Hyeongi Son : 지금 조치했습니다 June 10, 2025 at 9:56 PM, FACS_TaehyeongJin : 임시조치 하여 가동시작하였습니다 작업 완료후에 센서 점검 하겠습니다 June 10, 2025 at 9:56 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다. 작업 재 시작 하겠습니다 June 10, 2025 at 10:00 PM, Őri Imre : 4sorra kellene egy kis help! Üres ládákat jöttek le a raktárból June 10, 2025 at 10:01 PM, Őri Imre : Alsó burkolat. June 10, 2025 at 10:20 PM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) PM님 35번뱅크 화성포장기에서 오는 완제품도 같이 입고가 되고 있는데, 34,35번 별도 입출고 설정 해주시는거 아니셨을까요?? 완제품도 지금 35번 뱅크로 같이 입고 되고 있어서요. June 10, 2025 at 10:22 PM, SKOH2/제조-셀,모듈 출하/김병호 : 아직 적용전인지 여쭤 봅니다.. 입고가 너무 느리게 되고 있어서요 June 10, 2025 at 10:25 PM, 배병민 (Bae Byoungmin) : 금일 34, 35번 창고 적재율에 맞추어 자동 분배 입고 되는 로직으로 개선되었습니다 현재 적용된 로직이 정상적인 반송 Rull입니다. 지금은 34번에 적재율이 높아 35번으로 치중되지만 곧 해소가 될것입니다. 어느 한곳에 맞추어 Rull을 변경 적용하는것은 또다른 Risk가 생길 가능성이 있기에 이점 양해바랍니다 June 10, 2025 at 10:38 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네. 말씀 감사합니다 June 10, 2025 at 11:21 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FAcs_team 셀트레이 입고 작업 끝났습니다. 지원 감사합니다 June 10, 2025 at 11:21 PM, FACS_Hyeongi Son : 넵 고생하셨습니다 June 10, 2025 at 11:47 PM, Mohammad Amir : @FA @N.Gábor F.A. Please check M0STK011_P06 ther ejs Light Curtain error and several jobs are pending. Thank you! June 10, 2025 at 11:47 PM, N.Gábor F.A. : Checking June 10, 2025 at 11:52 PM, N.Gábor F.A. : Solved June 10, 2025 at 11:52 PM, Mohammad Amir : Köszönöm szepen 🙏 June 11, 2025 at 12:09 AM June 11, 2025 at 12:09 AM, Éváné Bori Viktória : Sziasztok! Box packingnél, a szétszedő részén, nem veszi le a keretet a gép. Kérlek nézzétek meg! June 11, 2025 at 12:10 AM, N.Gábor F.A. : Megyek June 11, 2025 at 2:46 AM, Éváné Bori Viktória : Sziasztok! GF 1 buffer hibajelzésre áll ki, kérlek nézzétek meg! June 11, 2025 at 3:18 AM, 원승연(Seungyeon Won) : M0STK011_P06 not working, plz check June 11, 2025 at 3:30 AM, Dávid F.A. : Solved! June 11, 2025 at 3:33 AM, 원승연(Seungyeon Won) : Thanks June 11, 2025 at 3:54 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK011_C01 there is CRANE fork right over run detect error. Thank you very much! June 11, 2025 at 3:55 AM, Éváné Bori Viktória : Sziasztok! GF 1 buffer hibát jelez, kérlek nézzétek meg! June 11, 2025 at 4:03 AM, Dávid F.A. : Solved! June 11, 2025 at 4:03 AM, Mohammad Amir : Köszönöm szepen 🙏. June 11, 2025 at 4:29 AM, Éváné Bori Viktória : Helló! Eol, AGV 12 move please June 11, 2025 at 4:30 AM, FA-CS-AGV-Masoud : Sure June 11, 2025 at 5:33 AM, Kiss András SSL “D” : Hello FA ! I would like to ask for help with the AGV6 on the Boxpacking OUT side. Thank you! June 11, 2025 at 5:34 AM, Kiss András SSL “D” : Trafic jam ! June 11, 2025 at 5:34 AM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 5:37 AM, FA-CS-AGV-Masoud : Solved June 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.11. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 11, 2025 at 6:33 AM, Nikolett SL/B EOL : Sziasztok Boxpacking Vacuum2 alarm hiba van Nem veszi fel a tetőt Valaki tudna jönni? Köszönöm June 11, 2025 at 6:38 AM, Denkó Jani (F.A.) : Megyünk June 11, 2025 at 6:54 AM, Gerbovits Kevin : Kész June 11, 2025 at 7:08 AM, Nikolett SL/B EOL : 7-8 Eol közt agv t arrébb tudna valaki küldeni? Köszönöm June 11, 2025 at 7:08 AM, FA/CS/AGV_ Asjad : coming June 11, 2025 at 7:12 AM, FA/CS/AGV_ Asjad : Done June 11, 2025 at 8:08 AM, Vadász Dóra SSL/B : Sziasztok Boxon szenzor hiba van. Kérem nézzétek meg. Köszönöm June 11, 2025 at 8:08 AM, Gerbovits Kevin : Megyünk June 11, 2025 at 8:12 AM, Nikolett SL/B EOL : Same problem June 11, 2025 at 8:12 AM, FA/CS/AGV_ Asjad : coming June 11, 2025 at 8:17 AM, FA/CS/AGV_ Asjad : Done June 11, 2025 at 8:19 AM, Boromisza Zoltán : Kész June 11, 2025 at 9:31 AM, FACS_JaewonShin : M0STK035 will stop 30min Colleps sensor check June 11, 2025 at 9:42 AM, Nikolett SL/B EOL : Sziasztok GF buffer home return fail errorral hibára áll ki Valaki tudna jönni. ? Köszönöm June 11, 2025 at 9:49 AM, Boromisza Zoltán : Úton June 11, 2025 at 9:54 AM, 배병민 (Bae Byoungmin) : @유경호(RYU KYEONGHO) 현재 셀 완제품 창고#35에 Z라벨 공팔레트가 57set 적재되어 있는 상황인데 박스 해체기로 Job이 생성 안되어 확인 해보니 Z라벨 공팔레트 목표 수량이 "0"으로 되어 있어 해체기 비가동 중입니다. Z발번 공팔레트 수량 설정을 일부러 "0"으로 하신건지 확인 부탁드립니다. 목표 수량 변경은 6/10 21시15분경 변경되었습니다. June 11, 2025 at 9:59 AM, Boromisza Zoltán : Kész June 11, 2025 at 10:14 AM, FACS_Bareum kim : M0STK027 will stop 5min PLC , HMI Backup June 11, 2025 at 10:41 AM, 정낙정(JEONG NAK JEONG) : Z 파레트 RTD수량 300개로 변경되었습니다. S파레트 선입고를 위해 Z수량을 변경했었으며, 차후 변경시 알림드리도록 하겠습니다. June 11, 2025 at 10:42 AM, 배병민 (Bae Byoungmin) : 넵, 감사합니다 June 11, 2025 at 12:53 PM, 배병민 (Bae Byoungmin) : 박스 포장기 팔레트 2단 적재 시, MES 4536 Model are Mixed. Error 발생되었는데 오류 부분이 무엇인지 확인 부탁드립니다. Lower ID : Z303816 Upper ID : Z007698 June 11, 2025 at 12:53 PM, 배병민 (Bae Byoungmin) : @준용 June 11, 2025 at 1:00 PM, 유경호(RYU KYEONGHO) : Z007698, Z007702, Z007692 공파레트입니다. 정보는 D2AA라서 오류발생했습니다. June 11, 2025 at 1:06 PM, FACS_Bareum kim : 지금 박스 포장기 라인에, 총 17파레트 올라와있고, Z007692, Z007702 파레트는, 지게차로 라인 밖으로 꺼내놓은 상황입니다. Z007698파레트까지 지게차 배출하고 라인 돌려도되는걸까요? June 11, 2025 at 1:08 PM, 유경호(RYU KYEONGHO) : 네 나머지는 이상없습니다. 근데 2단 적재까지 간건지요? June 11, 2025 at 1:09 PM, FACS_Bareum kim : 네 2단 적재후, MES Alarm 내려옵니다 June 11, 2025 at 1:27 PM, FACS_Bareum kim : 해당 파레트 수동 배출 후, 연속 4파레트 정상 가동, 배출중입니다. 확인 감사합니다. June 11, 2025 at 1:54 PM, 최준영(JoonYoung Choi) : Formation EOL AGV#8,9 Please move it to another place. June 11, 2025 at 1:55 PM, FA/CS/AGV_ Asjad : Checking June 11, 2025 at 1:56 PM, FA/CS/AGV_ Asjad : Done June 11, 2025 at 3:40 PM, 배병민 (Bae Byoungmin) : @정낙정(JEONG NAK JEONG) @유경호(RYU KYEONGHO) 박스 포장기 출고 Job 없는데 혹시 주간 추가 생산 없으신건가요? June 11, 2025 at 4:35 PM, FACS_Hyeongi Son : @Duna Don Please go to the raw material port and empty the passage blocked by AGV June 11, 2025 at 4:36 PM, Duna Don : Which line? June 11, 2025 at 4:38 PM, FACS_Hyeongi Son : @FACS_TaehyeongJin Go with him June 11, 2025 at 4:50 PM, Duna Don : Done ✅ June 11, 2025 at 5:11 PM, Szabolcs : @FA M0CNV036_58_023 problem. Please check. June 11, 2025 at 5:12 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team M0CNV036_58_023 problem. Please check. GF 레인 알람발생입니다. 동일현상입니다 June 11, 2025 at 5:12 PM, FACS_Hyeongi Son : 이동하겠습니다 June 11, 2025 at 5:16 PM, FACS_Hyeongi Son : 조치완료했습미다 June 11, 2025 at 5:33 PM, 유경호(RYU KYEONGHO) : 박스포장기 투입 대기 수량이 적어서 그렇습니다. June 11, 2025 at 6:04 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— June 11, 2025 at 6:24 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.11 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 11, 2025 at 6:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : 셀도크장 1F 35뱅크 알람발생입니다 June 11, 2025 at 6:35 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team AGV 후단부 M0CNV036_P14_BP01 빠른 확인 바랍니다 June 11, 2025 at 6:36 PM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 6:38 PM, FACS_TaehyeongJin : 이동중입니다 June 11, 2025 at 7:24 PM, Tklcz Alexandra SL/A : Hi! Near EOL9 buffer AGV9 error. June 11, 2025 at 7:24 PM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 7:27 PM, FA-CS-AGV-Masoud : Port was under alarm thanks June 11, 2025 at 7:28 PM, FA-CS-AGV-Masoud : @fa Please check M0STK011_P06 C/V light curtain detect error June 11, 2025 at 7:32 PM, FA-CS-AGV-Masoud : @Csepi Árpád June 11, 2025 at 7:41 PM, Csepi Árpád : Solved June 11, 2025 at 7:51 PM, 이재근(lee jae geun) : same problem June 11, 2025 at 7:53 PM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 7:54 PM, FA-CS-AGV-Masoud : Solved June 11, 2025 at 8:04 PM, Tklcz Alexandra SL/A : EOL9 buffer AGV15 error June 11, 2025 at 8:08 PM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 8:09 PM, FA-CS-AGV-Masoud : Solved June 11, 2025 at 8:22 PM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M7MFA300_P33 Lift up/down error June 11, 2025 at 8:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 11, 2025 at 8:28 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team, RTD/MCS 남측 셀 토크장 M0CNV036_M01 잡생성이 안되고 있습니다. 빠른 확인 부탁드립니다. June 11, 2025 at 8:29 PM, FACS_Hyeongi Son : 목적지 알려주시면 수동입고 해드리겠습니다 June 11, 2025 at 8:29 PM, SKOH2/제조-셀,모듈 출하/김병호 : 목적지는 34번이나 35번으로 넣어주시면 됩니다 June 11, 2025 at 8:37 PM, FACS_Hyeongi Son : 지금 잡 생성되었습미다 June 11, 2025 at 8:39 PM, VK (mcs) : Transport job terminated by interrail at 20:23 Now it’s heading to STK35 June 11, 2025 at 9:33 PM, Magosi Erik : @FA-CS-AGV-Masoud please check cell agv on module side Number 5. Acs alive alarm June 11, 2025 at 9:33 PM, Magosi Erik : Thank You June 11, 2025 at 9:33 PM, FA-CS-AGV-Masoud : Coming June 11, 2025 at 9:36 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS-team 금일 셀 트레이 작업 마무리 되었습니다. June 11, 2025 at 9:37 PM, FACS_Hyeongi Son : 고생하셨습니다 June 11, 2025 at 9:37 PM, FA-CS-AGV-Masoud : Solved June 11, 2025 at 10:02 PM, Magosi Erik : @Csepi Árpád Szia! Gyere ki légyszives a 3as sor p29 porthoz. Agv nem tölti be az alapanyagot June 11, 2025 at 10:03 PM, Magosi Erik : Köszike June 11, 2025 at 10:12 PM, Csepi Árpád : Kész June 11, 2025 at 10:12 PM, Magosi Erik : Köszike June 12, 2025 at 2:35 AM June 12, 2025 at 2:35 AM, 이재근(lee jae geun) : plz check AGV 12 June 12, 2025 at 2:35 AM, FA-CS-AGV-Masoud : On the way June 12, 2025 at 2:37 AM, 이재근(lee jae geun) : solve June 12, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.12. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 12, 2025 at 6:11 AM, Nikolett SL/B EOL : Sziasztok Eol 7-8 Can anyone among you drive the AGV? We want to remove pallets from the line. June 12, 2025 at 6:11 AM, FA/CS/AGV/Taimur : Sure June 12, 2025 at 6:14 AM, Shakir (MCS) : @FA Good Morning Please check M0STK011_P12, CV Data mismatch error. M0STK011_C01: Crane fork right over run detect Thank you June 12, 2025 at 6:56 AM, Nikolett SL/B EOL : Could you please help me with this? again June 12, 2025 at 7:13 AM, FA/CS/AGV/Taimur : This message was deleted. June 12, 2025 at 11:47 AM, 배병민 (Bae Byoungmin) : @정낙정(JEONG NAK JEONG) @유경호(RYU KYEONGHO) 재공 부족으로 박스 포장기 비가동 상황이라 박스 해체기도 현재 포장 자재가 buffer 구간에 Full인 상황으로 비가동중입니다. 박스 포장기가 가동 되면 해체기도 자동 가동되는 상황이며 S라벨 공팔레트 공급이 중단된 상태인점 참고부탁드립니다 June 12, 2025 at 3:20 PM, 김대은 : Please move AGV 8 June 12, 2025 at 3:21 PM, FA/CS/AGV/Taimur : Sure. June 12, 2025 at 3:36 PM, Horváth László SL/B : Check please AGV#8 in EOL Slam error June 12, 2025 at 3:37 PM, Duna Don : Checking June 12, 2025 at 3:38 PM, Duna Don : Already solved! Thanks June 12, 2025 at 6:16 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(3): Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— June 12, 2025 at 6:25 PM, Szentirmai Z. A/SSL : Sziasztok! @Édl Tamás Box packingon szüksegünk lenne a segítségedre June 12, 2025 at 6:33 PM, FA CS AGV Jawad : Hi @Édl Tamás can you plz help me at STK 14..? June 12, 2025 at 6:58 PM, Szabolcs : @FA M0CNV036_P14_BP01 problem. Check please. June 12, 2025 at 7:00 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035 1F M0CNV036_P14_BP01 problem. Check please. June 12, 2025 at 7:01 PM, FACS_Hyeongi Son : 이동하겠습니다 잠시만 기다려주세요 June 12, 2025 at 7:01 PM, FACS_TaehyeongJin : Solved June 12, 2025 at 7:07 PM, Szentirmai Z. A/SSL : Thank you June 12, 2025 at 7:15 PM, FACS_TaehyeongJin : Solved June 12, 2025 at 7:25 PM, Szabolcs : @FACS_team M0STK035 1F M0CNV036_P14_BP01 problem. Check please. June 12, 2025 at 7:26 PM, FACS_Hyeongi Son : Working on that June 12, 2025 at 7:43 PM, FACS_TaehyeongJin : Solved June 12, 2025 at 8:12 PM, Szabolcs : @FACS_team M0STK035 1F M0CNV036_P14_BP01 problem. Check please. June 12, 2025 at 8:13 PM, FACS_Hyeongi Son : Just moment June 12, 2025 at 9:33 PM, 원승연(Seungyeon Won) : @배병민 (Bae Byoungmin) 금일 6라인 미주 출하용 생산 예정이여서 박스포장기 및 해체기 가동에 문제 없을 것으로 예상됩니다. 감사합니다 June 12, 2025 at 9:34 PM, 배병민 (Bae Byoungmin) : 넵 알겠습니다. 지원 필요하시면 언제든 연락주세요^^ June 12, 2025 at 11:45 PM, Tklcz Alexandra SL/A : GF buffer 2 alarm. Please check. June 12, 2025 at 11:57 PM, Édl Tamás : Kész June 13, 2025 at 1:40 AM June 13, 2025 at 1:40 AM, Szentirmai Z. A/SSL : @Édl Tamás Varázslatos programokkal várja látogatóit az álomdoboz gyár 😉 June 13, 2025 at 3:06 AM, Tklcz Alexandra SL/A : Please move AGV16 June 13, 2025 at 3:06 AM, FA CS AGV Jawad : Sure June 13, 2025 at 3:10 AM, FA CS AGV Jawad : Done June 13, 2025 at 4:18 AM, Szentirmai Z. A/SSL : @Édl Tamás Ha kitaláltad hol várlak nagy szeretettel, akkor idefelé hozz ragasztót is kérlek. Megnéztem a szerszámon lévő vákuumkorongokat, 2-nek le van szakadva a szivacsozása 😞 June 13, 2025 at 5:22 AM, Szentirmai Z. A/SSL : @Mr.Miti (미티) FA In the Box Packing machine, the top cover remover indicated a vacuum error many times, the Korean technicians adjusted the parameters of the tool today, so at first I thought that this was the cause. I examined the vacuum funnels on the tool and discovered that on 2 out of 8 the foam insert was damaged. I reported it to the maintenance, but they don't have a replacement part. And gluing the sponge is not possible, due to the degree of destruction. Please let the Korean technici June 13, 2025 at 5:27 AM, Szentirmai Z. A/SSL : @김지현(Ji Hyun KIM) June 13, 2025 at 6:45 AM, R. József C SL EOL : Jó reggelt Boxpackingra kérnék segítséget bontó oldalra topcovernál felvételi gond van June 13, 2025 at 9:02 AM, 김대은 : Please move AGV10,12 June 13, 2025 at 9:02 AM, FA/CS/AGV/Taimur : Sure June 13, 2025 at 9:14 AM, R. József C SL EOL : Please send other position agv#12 Line 8-9 between Pallet move June 13, 2025 at 9:14 AM, FA/CS/AGV/Taimur : Sure June 13, 2025 at 9:42 AM, Halász György SL : Hi, Modul 1F line7 BMA buffer agv alarm June 13, 2025 at 9:43 AM, FA/CS/AGV/Taimur : Checking June 13, 2025 at 9:43 AM, Halász György SL : Thanks June 13, 2025 at 9:43 AM, FA/CS/AGV/Taimur : Anytime Uram June 13, 2025 at 9:50 AM, FA/CS/AGV/Taimur : Solved June 13, 2025 at 11:29 AM, Halász György SL : Hi, Modul 1F line7 cell loading block1 agv alarm June 13, 2025 at 11:29 AM, FA/CS/AGV/Taimur : Checking already June 13, 2025 at 11:31 AM, 윤성제(Yoon SungJe) : Solved June 13, 2025 at 2:00 PM, R. József C SL EOL : Eol 9-10 között útban van a #9 agv June 13, 2025 at 2:00 PM, R. József C SL EOL : Kérlek küldjétek el June 13, 2025 at 2:00 PM, FA/CS/AGV/Taimur : Sure June 13, 2025 at 2:02 PM, FA/CS/AGV/Taimur : Moved. Thank you June 13, 2025 at 2:53 PM, R. József C SL EOL : Again pls just agv #8 Thanks June 13, 2025 at 2:54 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget Vákuum probléma June 13, 2025 at 2:54 PM, FA/CS/AGV/Taimur : Sure June 13, 2025 at 2:54 PM, Zoltán Harasztia FA : Megyek June 13, 2025 at 3:37 PM, Halász György SL : Hi, Modul 1F line7 endplate loading gantry alarm June 13, 2025 at 3:47 PM, Döme György F.A : Megyünk June 13, 2025 at 3:47 PM, Halász György SL : Thanks June 13, 2025 at 3:50 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team M0STK035 1F M0CNV036_P14_BP01 problem. Check please. June 13, 2025 at 3:51 PM, FACS_Hyeongi Son : 지금 조치중입미다 June 13, 2025 at 4:28 PM, FACS_Bareum kim : @유경호(RYU KYEONGHO) MES 0019 Error 발생시간 : 250613 16시8분,10분 Weight, TopCover Pallet ID :S001119 해당 Alarm 내용 확인 요청드립니다. June 13, 2025 at 4:34 PM, Boromisza Zoltán : Kész June 13, 2025 at 5:24 PM, Halász György SL : Hi, Modul 1F line7 endplate loading gantry alarm Vision correction value ng. June 13, 2025 at 5:27 PM, Döme György F.A : Megyek June 13, 2025 at 5:35 PM, Halász György SL : Thanks June 13, 2025 at 5:44 PM, Döme György F.A : Kész June 13, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 13, 2025 at 8:52 PM, Éváné Bori Viktória : Helló! Eol 2 AGV 12 move please June 13, 2025 at 8:52 PM, FA CS AGV Jawad : Sure June 13, 2025 at 9:22 PM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK012_P09 there is Light Curtain error and because of this job for AGV#8 and #6 is getting delayed. Thank you very much! June 13, 2025 at 9:26 PM, Dávid F.A. : Készen van.! June 13, 2025 at 9:27 PM, Mohammad Amir : Köszönöm szepen 🙏 June 13, 2025 at 9:43 PM, Éváné Bori Viktória : Helló! Eol 6 AGV nem teszi fel a palettát! Kérlek nézzétek meg June 13, 2025 at 9:47 PM, FA CS AGV Jawad : I check June 13, 2025 at 10:29 PM, Szijjártó Balázs : Module 1F, Line7, no.3 AGV again problematic, blocked on port entry. Pls check! June 13, 2025 at 10:29 PM, FA CS AGV Jawad : I do June 13, 2025 at 10:34 PM, FA CS AGV Jawad : Plz reset port June 13, 2025 at 10:34 PM, Szijjártó Balázs : 1 min! June 13, 2025 at 10:34 PM, FA CS AGV Jawad : Sure June 13, 2025 at 10:52 PM, FA CS AGV Jawad : Can someone plz check 1F end product Line 6-7 Out port..? June 13, 2025 at 11:19 PM, Szijjártó Balázs : AGVs are whining in front of modul Line 6. 3 AGVs in one place. June 13, 2025 at 11:20 PM, FA CS AGV Jawad : I check June 13, 2025 at 11:26 PM, FA CS AGV Jawad : Solvef June 13, 2025 at 11:32 PM, FA CS AGV Jawad : @Szijjártó Balázs can you plz check End product "Inport" AGV is waiting to unload pallets June 13, 2025 at 11:33 PM, FA CS AGV Jawad : Line 7 June 13, 2025 at 11:33 PM, Szijjártó Balázs : Okay! June 13, 2025 at 11:33 PM, FA CS AGV Jawad : Thank you June 14, 2025 at 1:48 AM June 14, 2025 at 1:48 AM, Éváné Bori Viktória : Helló! Box packingre szeretnék segítséget kérni. Szervo probléma. June 14, 2025 at 2:02 AM, Őri Imre : 3-4 sor közötti magas raktár kiadónál elakadt egy raklap June 14, 2025 at 2:03 AM, N.Gábor F.A. : Megyek June 14, 2025 at 4:13 AM, 함희훈(HAM HEE HOON) : 10L EOL AVG pallet supply is not available. Please check. @FA June 14, 2025 at 4:13 AM, Mohammad Amir : Checking June 14, 2025 at 4:14 AM, 함희훈(HAM HEE HOON) : If it takes a long time, please insert it manually. June 14, 2025 at 4:19 AM, Mohammad Amir : @N.Gábor F.A. There is a job exists for EOL -10, please check Z101382 located at M0STK013(0201905) ,it is not moving and because of this there is delay in EOL-10 materials delivery. Everything is good from MCS RTD side ✅. Please check from SCS side why it is not moving. Thank you very much! June 14, 2025 at 4:21 AM, N.Gábor F.A. : Checking June 14, 2025 at 4:28 AM, N.Gábor F.A. : The problem was that the Z101384 data remained on the port, but the palette was physically no longer there. I deleted the data, and now the palette is on its way. June 14, 2025 at 4:29 AM, Mohammad Amir : Hello, Issue has been resolved ✅ Now empty pallet on its way to EOL-10 . Thank you very much! June 14, 2025 at 4:29 AM, Mohammad Amir : Köszönöm szepen 🙏 June 14, 2025 at 4:30 AM, N.Gábor F.A. : Your welcome June 14, 2025 at 4:33 AM, Éváné Bori Viktória : Helló! Eol 10 AGV move please June 14, 2025 at 4:34 AM, FA CS AGV Jawad : Sure June 14, 2025 at 6:21 AM, Halász György SL : Good morning, Modul 1F line7 modul unloading AGV error June 14, 2025 at 6:22 AM, FA/CS/AGV/Taimur : Checking June 14, 2025 at 6:22 AM, Halász György SL : Thanks June 14, 2025 at 6:30 AM, FA/CS/AGV/Taimur : Solved. Thank you June 14, 2025 at 7:25 AM, R. József C SL EOL : Kérlek nézzétek meg a buffert, eol 1-es sorra nem érkezik paletta June 14, 2025 at 7:28 AM, duzzaman Md (MCS) : Job has been created 90 seconds earlier. You'll receive it soon June 14, 2025 at 8:39 AM, R. József C SL EOL : #15 AGV is not in a good location between 7-8 please send it to another location 4 pallets are moved between rows Thank you June 14, 2025 at 8:39 AM, FA/CS/AGV/Taimur : Sure June 14, 2025 at 9:09 AM, R. József C SL EOL : Boxpackingra kérnék segítséget, vacuum hiba van June 14, 2025 at 9:09 AM, Sarvajcz Ferenc FA : Ok.. June 14, 2025 at 9:18 AM, Döme György F.A : Kész June 14, 2025 at 9:19 AM, R. József C SL EOL : Köszönöm June 14, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 14, 2025 at 6:33 PM, Czébely Dániel SL—D : Sziasztok a kicsomakoló résznél a gép elenged olyan palletákat amikről nem szedi le a fedő esetleg rá Tudnátok nézni és ha szükséges akkor álitsátok átt manuális fedél leszedésre. Köszönöm. June 14, 2025 at 7:08 PM, Éváné Bori Viktória : Helló! AGV not comming in EOL 1-2 please check June 14, 2025 at 7:11 PM, Shakir (MCS) : EOL2 : AGV06, on the way June 14, 2025 at 7:15 PM, Shakir (MCS) : @FA Please check M0STK011 crane is not moving. Thank you June 14, 2025 at 7:37 PM, Shakir (MCS) : @N.Gábor F.A. @FA There is a job exists for EOL01 please check T704739 located at M0STK011(0100512) ,it is not moving, job getting delayed. Everything is good from MCS RTD side. Please check from SCS side why it is not moving. Thank you. June 14, 2025 at 7:39 PM, Shakir (MCS) : @Dávid F.A. June 14, 2025 at 7:42 PM, Dávid F.A. : @Shakir (MCS) Good evening! The warehouse is ready for operation! June 14, 2025 at 7:46 PM, Shakir (MCS) : Issue resolved now ✅ AGV18, on the way to EOL#1 Thank you June 14, 2025 at 7:55 PM, 함희훈(HAM HEE HOON) : Hello, please check that EOL 9/10 line empty pallets are not supplied. June 14, 2025 at 7:56 PM, Shakir (MCS) : EOL9: AGV06 on the way ✅ June 14, 2025 at 7:57 PM, Shakir (MCS) : EOL10: AGV14, on the way ✅ June 14, 2025 at 7:58 PM, Shakir (MCS) : @FA Please check M0STK012_P09 there is C/V light curtain detect error. Thank you June 14, 2025 at 10:34 PM, Őri Imre : Modul 3-4 sor között agv találkozó (smile) June 14, 2025 at 10:34 PM, Őri Imre : Valaki fel tudná oszlatni?(beam) June 14, 2025 at 10:36 PM, FA CS AGV Jawad : I check June 14, 2025 at 10:38 PM, FA CS AGV Jawad : Done June 14, 2025 at 11:31 PM, Szijjártó Balázs : Line 7 kitöltéshez kéne kis segítség. June 14, 2025 at 11:31 PM, FA CS AGV Jawad : OMW June 14, 2025 at 11:33 PM, Dávid F.A. : Solved June 15, 2025 at 12:44 AM June 15, 2025 at 12:44 AM, Szijjártó Balázs : Modul Line 7. AGVs do not come for empty palettes. Pls help! June 15, 2025 at 1:09 AM, FA CS AGV Jawad : @Dávid F.A. can you plz help at STK 11 ? June 15, 2025 at 1:55 AM, FA CS AGV Jawad : @ACS can you plz delete the job for AGV 03, Pallet ID S001210 June 15, 2025 at 2:01 AM, FA CS AGV Jawad : @Shakir (MCS) plz stop further delivery to Boxpacking untill asked. Thanks Line is not running and its delaying other jobs and blocking AGVs June 15, 2025 at 2:03 AM, Shakir (MCS) : Already Ports are OOS June 15, 2025 at 2:05 AM, Éváné Bori Viktória : Heló! Eol AGV 12 move please June 15, 2025 at 2:06 AM, FA CS AGV Jawad : Sure June 15, 2025 at 2:08 AM, FA CS AGV Jawad : Done June 15, 2025 at 4:02 AM, 채효석(Hyoseok CHAE) : "Nem érkezik üres raklap az EOL1 sorhoz June 15, 2025 at 5:44 AM, 원승연(Seungyeon Won) : Why is the box unpacking machine in manual mode? Was there an issue? @formation EOL SL @FA TECH June 15, 2025 at 6:02 AM, R. József C SL EOL : Boxpackingra kérnék kicsomagolóhoz segítséget Work defect error June 15, 2025 at 6:05 AM, Döme György F.A : Nemsokára érkezünk June 15, 2025 at 6:11 AM, R. József C SL EOL : Ez a része megoldva June 15, 2025 at 6:12 AM, R. József C SL EOL : Topcovernál viszont vákuum hiba June 15, 2025 at 6:48 AM, Döme György F.A : There are continuous errors with the top cover on the box unpacking machine. Either it doesn’t pick it up at all, or the cover falls back down because it is too deformed. The vacuum system has been checked and is functioning properly. As a result, production is not running continuously. June 15, 2025 at 7:19 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 1es sorra nem hoz palettát az AGV. Kérlek ellenőrizzétek June 15, 2025 at 7:22 AM, Döme György F.A : 3-mas raktárban van az anyag.Kint van a parancs,most fogja kivenni. June 15, 2025 at 7:24 AM, Sási Zsolt SL/C/ EOL : Addig betoltunk egyet, mert elfogy June 15, 2025 at 7:25 AM, Döme György F.A : Okés.Nemsokára viszi June 15, 2025 at 7:27 AM, Sási Zsolt SL/C/ EOL : Köszi June 15, 2025 at 7:51 AM, 이재근(lee jae geun) : plz check AGV 08 near 7line June 15, 2025 at 7:52 AM, 원승연(Seungyeon Won) : AGV 10 check plz June 15, 2025 at 7:52 AM, Duna Don : Checking June 15, 2025 at 7:56 AM, Duna Don : Solved June 15, 2025 at 8:03 AM, Halász György SL : Hi, Modul 1F line7 modul unloading AGV alarm June 15, 2025 at 8:03 AM, FA/CS/AGV_ Asjad : Checking June 15, 2025 at 8:03 AM, Halász György SL : Thanks June 15, 2025 at 8:06 AM, FA/CS/AGV_ Asjad : Fixed June 15, 2025 at 8:46 AM, 원승연(Seungyeon Won) : AGV 8 check plz June 15, 2025 at 8:49 AM, Duna Don : On the way June 15, 2025 at 8:52 AM, Duna Don : Sorry, we were addressing another issue at 1F. It has now been resolved. Thank you!! June 15, 2025 at 8:55 AM, 원승연(Seungyeon Won) : Thanks June 15, 2025 at 9:37 AM, R. József C SL EOL : kérlek nézzétek meg a raktárt, nem erkezik Hyundai paletta (Z) a kicsomagoló gépre please check the warehouse, no Hyundai pallet (Z) is coming to the unpacking machine June 15, 2025 at 9:38 AM, R. József C SL EOL : Thanks June 15, 2025 at 9:39 AM, Döme György F.A : Már is nézem June 15, 2025 at 9:42 AM, Döme György F.A : Agv úton van vele June 15, 2025 at 9:44 AM, R. József C SL EOL : Super June 15, 2025 at 9:50 AM, 배병민 (Bae Byoungmin) : The box dismantler is currently supplying S-label Empty according to the setup logic. If you need a Z-label palette, change it by setting the RTD's buffer, etc. June 15, 2025 at 9:56 AM, 원승연(Seungyeon Won) : 피엠님 저희 지금 Z 팔레트 부족해서 오늘 아침에 Z수량만 가능하도록 변경했었습니다. @[민겸]MinGyum June 15, 2025 at 9:57 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 현재 제가 모니터링 하면서 변경하고있습니다 June 15, 2025 at 10:16 AM, 배병민 (Bae Byoungmin) : R라벨 Empty 출고되고있습니다. Z라벨 PLT 급하시면 나머지는 "0"으로 설정하시고 Z 만 수량 지정하는게 낳이 보입니다. 지금 Z,R "300" / S "144"로 지정되어 있습니다. June 15, 2025 at 10:16 AM, [민겸]MinGyum : 변경했승니다 June 15, 2025 at 10:29 AM, 배병민 (Bae Byoungmin) : Z라벨 Empty 박스해체기로 출고 시작되었습니다 June 15, 2025 at 10:59 AM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingra. Vákuum probléma van June 15, 2025 at 10:59 AM, Zoltán Harasztia FA : Megyünk June 15, 2025 at 11:04 AM, Sási Zsolt SL/C/ EOL : Köszi June 15, 2025 at 11:05 AM, Zoltán Harasztia FA : Kész June 15, 2025 at 1:02 PM, R. József C SL EOL : Cellbuffer 2 Hiba kód 1346:c/v light curtain detected error Kérlek nézzétek meg June 15, 2025 at 1:02 PM, Sarvajcz Ferenc FA : Oke. June 15, 2025 at 1:02 PM, Zoltán Harasztia FA : Megyünk June 15, 2025 at 1:10 PM, Sarvajcz Ferenc FA : Kész June 15, 2025 at 1:11 PM, R. József C SL EOL : Köszönöm June 15, 2025 at 1:49 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek a 3as sorral szemben a bufferhez June 15, 2025 at 1:49 PM, Sási Zsolt SL/C/ EOL : 1 paletta elakad June 15, 2025 at 1:49 PM, Sarvajcz Ferenc FA : Mar nezem June 15, 2025 at 1:51 PM, Sarvajcz Ferenc FA : Esmaile! Pls, you come to here.thx June 15, 2025 at 1:51 PM, Duna Don : On the way June 15, 2025 at 1:56 PM, Sarvajcz Ferenc FA : 10 sorral szemben vagyok. Ismael, to here pls June 15, 2025 at 1:56 PM, Sarvajcz Ferenc FA : 10 line June 15, 2025 at 1:58 PM, R. József C SL EOL : Ők meg itt vannak ahova kérted őket, 3-as sorral szemben volt gond June 15, 2025 at 2:02 PM, Sarvajcz Ferenc FA : Bocsanat. June 15, 2025 at 2:06 PM, Duna Don : No problem, now everything is fine. Thank you! June 15, 2025 at 3:28 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek az 1Sorra. 12es AGV áll June 15, 2025 at 3:29 PM, Sarvajcz Ferenc FA : Ok June 15, 2025 at 3:33 PM, Duna Don : Solved June 15, 2025 at 3:34 PM, Sási Zsolt SL/C/ EOL : Thank you June 15, 2025 at 3:39 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek boxpackingre. 2es pantolóval van probléma. Köszönöm June 15, 2025 at 3:40 PM, Sarvajcz Ferenc FA : Ok June 15, 2025 at 3:41 PM, R. József C SL EOL : Eol 10 Agv 16 Check please Thank you June 15, 2025 at 3:41 PM, FA/CS/AGV_ Asjad : Coming June 15, 2025 at 3:44 PM, FA/CS/AGV_ Asjad : Solved June 15, 2025 at 3:55 PM, Zoltán Harasztia FA : Kész June 15, 2025 at 3:55 PM, Sási Zsolt SL/C/ EOL : Köszi June 15, 2025 at 5:22 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek a 4es sorral szemben a bufferhez. Van egy paletta ami elakadt. Köszi June 15, 2025 at 5:22 PM, Döme György F.A : Megyünk June 15, 2025 at 5:57 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Kiss Balázs, Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 15, 2025 at 6:13 PM, 최기수(GI SU CHOI) left this chatroom. June 15, 2025 at 6:23 PM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok tudtok jönni a kicsomagolóhoz a feldél leszedő vákum hibára ál ki folyamatosan. June 15, 2025 at 6:23 PM, N.Gábor F.A. : Megyünk June 15, 2025 at 6:38 PM, Jun(정우준)_SKOH FA : Night shift FA Schedule Date: 2025.06.15 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. GF 최명운(CHOI Myoungwoon) 3. GF 김정희(Kim jeong hul) June 15, 2025 at 6:44 PM, Éváné Bori Viktória : Helló! AGV 8 PIO loading time over alarm please check. MOSTK013-STK-OP#3 June 15, 2025 at 6:48 PM, FA-CS-AGV-Masoud : Thanks for information, it’s Port problem FA are working on it June 15, 2025 at 6:59 PM, Dávid F.A. : Solved! June 15, 2025 at 7:01 PM, Éváné Bori Viktória : Köszi! June 15, 2025 at 7:18 PM, Szijjártó Balázs : Line 7,UPR gentry, Axis 1-2, Y1-Y2 +limit error. Pls help! June 15, 2025 at 7:25 PM, N.Gábor F.A. : Megyek June 15, 2025 at 8:01 PM, 함희훈(HAM HEE HOON) : Please check AGV number 14 June 15, 2025 at 8:01 PM, FA-CS-AGV-Masoud : Coming June 15, 2025 at 8:05 PM, FA-CS-AGV-Masoud : Solved June 15, 2025 at 8:59 PM, Szijjártó Balázs : Line 7, no.3 small AGV. Problematic again. Pls help! June 15, 2025 at 8:59 PM, FA-CS-AGV-Masoud : Coming June 15, 2025 at 9:01 PM, Éváné Bori Viktória : Sziasztok! A Box packingen segítségre van szükségünk, a szétszedőnél van a gond! @N.Gábor F.A. @Dávid F.A. June 15, 2025 at 9:17 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M7MFA300_P28 Lift up/down error June 15, 2025 at 10:04 PM, Mohammad Amir : Update:- The mentioned pallet has successfully stored in M0STK025(0203002) at 21:58 ✅. Feel free to contact me again if you need further assistance. Thank you very much! June 16, 2025 at 12:53 AM June 16, 2025 at 12:53 AM, FA-CS-AGV-Masoud : Solved June 16, 2025 at 1:13 AM, Czébely Dániel SL—D : @FA-CS-AGV-Masoud Box packing front side AGV problem June 16, 2025 at 5:52 AM, Czébely Dániel SL—D : @FA-CS-AGV-Masoud 18 AGV plz muve eny position June 16, 2025 at 5:52 AM, FA/CS/AGV_ Asjad : Coming June 16, 2025 at 5:54 AM, FA/CS/AGV_ Asjad : Done June 16, 2025 at 6:04 AM, Tklcz Alexandra SL/A : Hi! AGV 15 and 18 error EOL June 16, 2025 at 6:05 AM, FA/CS/AGV_ Asjad : Coming June 16, 2025 at 6:07 AM, FA/CS/AGV_ Asjad : Fixed June 16, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 16, 2025 at 6:39 AM, 원승연(Seungyeon Won) : The pallets haven’t arrived at Line 9 yet. Could you please check? June 16, 2025 at 6:39 AM, 원승연(Seungyeon Won) : Cell packing June 16, 2025 at 6:43 AM, 원승연(Seungyeon Won) : M0STK013 Z101560 check please June 16, 2025 at 6:46 AM, Shakir (MCS) : @FA Please check the M0STK013 carrier is not moving. From MCS all good. Thank you June 16, 2025 at 6:50 AM, Shakir (MCS) : Now the carrier started to move ✅ AGV 014 is assigned On the way to line 9 Thank you June 16, 2025 at 6:52 AM, 원승연(Seungyeon Won) : Thank you! June 16, 2025 at 7:59 AM, Tklcz Alexandra SL/A : Please check AGV18 near eol5 in buffer. June 16, 2025 at 8:00 AM, Shakir (MCS) : @FA Please check M0STK013_P01 C/V CCW stop detect time over Thank yiu June 16, 2025 at 8:00 AM, FA/CS/AGV_ Asjad : coming June 16, 2025 at 8:03 AM, FA/CS/AGV_ Asjad : Fixed June 16, 2025 at 8:03 AM, FA/CS/AGV_ Asjad : Fixed June 16, 2025 at 8:16 AM, 윤성제(Yoon SungJe) : @이민호 MINHO 안녕하세요 pm님 해당 캐리어 자동화타고 내려왔다가 포트로 오지않고 AGV타고 다시 창고로 반송 된 것 같습니다 전산 입고되어서 수동출고 후 확인 필요합니다.그리고 PS230-2506040150도 확인 필요할 것 같습니다.수동출고 가능하실까요? June 16, 2025 at 8:27 AM, 이민호 MINHO : 네 도크장에서 확인부탁드겠습니다 June 16, 2025 at 8:28 AM, 윤성제(Yoon SungJe) : 네 알겠습니다 감사합니다 June 16, 2025 at 9:08 AM, Tklcz Alexandra SL/A : Near eol9 AGV6 error in buffer June 16, 2025 at 9:08 AM, FA/CS/AGV_ Asjad : Checking June 16, 2025 at 9:09 AM, FA/CS/AGV_ Asjad : Fixed June 16, 2025 at 9:33 AM, 원승연(Seungyeon Won) : 14일 해체기 투입된 파레트에 사이드 커버가 제거되지 않았습니다. 확인 부탁드리겠습니다. @[민겸]MinGyum @배병민 (Bae Byoungmin) S001368 June 16, 2025 at 9:55 AM, Tklcz Alexandra SL/A : Please check agv in boxpacking. June 16, 2025 at 9:55 AM, FA/CS/AGV_ Asjad : On my way June 16, 2025 at 10:01 AM, FA/CS/AGV_ Asjad : Solved June 16, 2025 at 10:34 AM, Tklcz Alexandra SL/A : Please boxpacking agv move. June 16, 2025 at 10:34 AM, FA/CS/AGV_ Asjad : Yes, I am here June 16, 2025 at 10:35 AM, FA/CS/AGV_ Asjad : Done June 16, 2025 at 11:32 AM, Tklcz Alexandra SL/A : Please move AGV18 in eol. June 16, 2025 at 11:32 AM, Duna Don : Checking June 16, 2025 at 11:34 AM, Duna Don : Done ✅ June 16, 2025 at 11:53 AM, Tklcz Alexandra SL/A : Please move AGV 14 and 15 near modul dock. June 16, 2025 at 11:54 AM, FA/CS/AGV_ Asjad : On it June 16, 2025 at 11:58 AM, FA/CS/AGV_ Asjad : Done June 16, 2025 at 12:11 PM, Tklcz Alexandra SL/A : Please AGV move boxpacking. June 16, 2025 at 12:12 PM, FA/CS/AGV_ Asjad : Fixing an error on 1F, will be there after this June 16, 2025 at 12:15 PM, FA/CS/AGV_ Asjad : Done June 16, 2025 at 2:30 PM, Tklcz Alexandra SL/A : Hi! EOL GF buffer 1 error. Please check. June 16, 2025 at 2:45 PM, Shakir (MCS) : @FA Please check M0STK013_P05 there is Home return fail error. Thank you June 16, 2025 at 2:58 PM, Csepi Árpád : Solved June 16, 2025 at 3:27 PM, Magosi Erik : @Csepi Árpád szia! Nem jön lowercase a 3as sorra. Van valami probléma a magasraktárban? Megtudán nézni kérlek? June 16, 2025 at 3:48 PM, Csepi Árpád : A 23-as raktárnál volt gond kis türelmet kérek úton a burkolat már a line 3-ra. June 16, 2025 at 3:48 PM, Magosi Erik : Köszi szépen June 16, 2025 at 6:04 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 FA, June 16, 2025 at 8:54 PM, FA-CS-AGV-Masoud : @Denkó Jani (F.A.) please check M0STK011_P05 C/V light curtain detect error June 16, 2025 at 9:24 PM, Denkó Jani (F.A.) : Solved June 16, 2025 at 9:55 PM, FA-CS-AGV-Masoud : @Denkó Jani (F.A.) please check M0STK011_P05 C/V data mismatch June 16, 2025 at 9:59 PM, Denkó Jani (F.A.) : Going June 16, 2025 at 10:13 PM, Denkó Jani (F.A.) : Solved June 17, 2025 at 2:46 AM June 17, 2025 at 2:46 AM, VK (mcs) : @FA Please check 2nd cell buffer M0STK012-P09 C/V light curtain detect error. June 17, 2025 at 3:02 AM, Gerbovits Kevin : Solved June 17, 2025 at 3:15 AM, FA-CS-AGV-Masoud : Could you please check it again?? Because it happened again right now June 17, 2025 at 3:40 AM, Denkó Jani (F.A.) : Solved June 17, 2025 at 5:12 AM, Vadász Dóra SSL/B : Sziasztok Box packing megdőlt, gyertek nézzétek meg. Köszönöm June 17, 2025 at 5:15 AM, Denkó Jani (F.A.) : Hamarosan ott vagyunk June 17, 2025 at 5:41 AM, Nikolett SL/B EOL : Eol 5-6 Line 9 Number AGV error please someone come Thanks June 17, 2025 at 5:41 AM, FA/CS/AGV_ Asjad : coming June 17, 2025 at 5:44 AM, FACS_TaehyeongJin : @mcs F0BPM011_P04 AGV is not coming please check June 17, 2025 at 5:45 AM, VK (mcs) : Destination is Out of service June 17, 2025 at 5:46 AM, 김지현(Ji Hyun KIM) invited 김성태(Seongtae Kim). June 17, 2025 at 5:46 AM, FA/CS/AGV_ Asjad : Solved already June 17, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 6:14 AM, Shakir (MCS) : @FA @Csepi Árpád Please check M0STK035 is OOS, Job delayed. Thank you June 17, 2025 at 6:23 AM, FACS_오창훈_CHANGHOON : @Csepi Árpád I am in front of crane 35. I need help from a Hungarian technician. June 17, 2025 at 6:36 AM, Tklcz Alexandra SL/A : Hi! AGV does not ship finished palettes from boxpacking. Can someone check why? June 17, 2025 at 6:38 AM, Shakir (MCS) : Because destination M0STK035 is out of service OOS. @FA team checking Thank you June 17, 2025 at 7:01 AM, Szabolcs : @FA M0STK035_C01 crane problem. Check please. June 17, 2025 at 7:01 AM, FACS_Hyeongi Son : FA taking action now June 17, 2025 at 7:08 AM, Tklcz Alexandra SL/A : Technikust kérünk a boxpacking unpacking részéhez, servo probléma. June 17, 2025 at 7:17 AM, FACS_오창훈_CHANGHOON : M0STK35 is now moving June 17, 2025 at 7:55 AM, Édl Tamás : Kész June 17, 2025 at 8:36 AM, 애니 : @FA M0STK037_C01 crane problem. Check please. June 17, 2025 at 11:27 AM, Tklcz Alexandra SL/A : Agv15 error in buffer near 9L EOL June 17, 2025 at 11:27 AM, FA/CS/AGV_ Asjad : Coming June 17, 2025 at 11:29 AM, FA/CS/AGV_ Asjad : Fixed June 17, 2025 at 2:07 PM, Tklcz Alexandra SL/A : 1GF buffer upstairs error alarm. Please check. June 17, 2025 at 2:25 PM, Csepi Árpád : Solved June 17, 2025 at 2:31 PM, FACS_Bareum kim : @유경호(RYU KYEONGHO) 박스포장기 F0BPM012 에서, 25/06/17 14:27:25초에 Weight 관련 MES19 Alarm 발생됐습니다. 무게 509 상한 523 하한 501 Pallet ID : R200448 입니다. 확인 요청드립니다. June 17, 2025 at 2:36 PM, 유경호(RYU KYEONGHO) : @Tklcz Alexandra SL/A please unloading and initialization. @배병민 (Bae Byoungmin) 포드 출하 수량이 많이 부족해서 mes19 발생 문제 해결이 시급합니다. June 17, 2025 at 2:40 PM, 배병민 (Bae Byoungmin) : 네 지금 담당자 현장서 확인중입니다. June 17, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.17 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(1): Szabadi Miklós Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(5): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (2): Csanálosi Gábor, Takács Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 17, 2025 at 6:43 PM, Nikolett SL/B EOL : Sziasztok Boxpacking szétszedőnél tetőnél vákuum probléma van valaki tudna jönni? Köszönöm June 17, 2025 at 6:44 PM, Denkó Jani (F.A.) : Hamarosan érkezünk June 17, 2025 at 6:59 PM, Denkó Jani (F.A.) : Solved June 17, 2025 at 7:17 PM, 배병민 (Bae Byoungmin) : 주간 박스포장기 122PLT 생산되어 출하에는 문제 없을꺼 같습니다. 야간도 정상 진행중입니다 June 17, 2025 at 7:44 PM, Vadász Dóra SSL/B : Sziasztok Vetkőztető gépre nézzetek rá kérlek. Köszönöm June 17, 2025 at 7:50 PM, FACS_Hyeongi Son : @SL The people of night shift FA is much smaller than day shift. Therefore, if there is a problem please tag FA or FA Technician and let know June 17, 2025 at 8:42 PM, 유용호 invited 임남영(Lim Nam Young) and 문혁기(moon hyeok ki). June 17, 2025 at 10:23 PM, Vadász Dóra SSL/B : Sziasztok Vetkőztető gépen vákuumhiba. Nézzétek meg kérlek. Köszönöm June 17, 2025 at 10:26 PM, Denkó Jani (F.A.) : Megyünk June 17, 2025 at 10:35 PM, Denkó Jani (F.A.) : Kész Egyre több a selejtes csomagoló anyag (jelen gépnél a tető olyan kb mint egy hullámpala tábla) És ugye azért is áll ki a gép hibára mert nincs rajta egy centi egyenes rész amin a vákum tappancs tudna szívni. June 17, 2025 at 10:36 PM, Vadász Dóra SSL/B : Köszönöm Sajnos hozott anyagból dolgozunk, de a reményt nem adjuk fel June 17, 2025 at 10:37 PM, Denkó Jani (F.A.) : Nekem ne mond 🥲 June 18, 2025 at 1:03 AM June 18, 2025 at 1:03 AM, Vadász Dóra SSL/B : Sziasztok Formázáson 2 agv is leállt. Sajnos számot mondani nem tudok. Nézzétek meg kérlek. Köszönöm June 18, 2025 at 1:04 AM, FA-CS-AGV-Masoud : Coming June 18, 2025 at 1:08 AM, Vadász Dóra SSL/B : Sziasztok Boxon szenzorhiba. Nézzétek meg kérlek June 18, 2025 at 1:09 AM, Gerbovits Kevin : Megyünk June 18, 2025 at 1:38 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 1:47 AM, Vadász Dóra SSL/B : Noch einmal... Együtt sírok a géppel June 18, 2025 at 1:51 AM, Denkó Jani (F.A.) : Wir werden bald da sein June 18, 2025 at 1:57 AM, FA-CS-AGV-Masoud : @Denkó Jani (F.A.) please check port M7MFA300_P29 1F June 18, 2025 at 2:08 AM, Kurkó Péter : Helló a felsőburkolat gantry sem megy miatta 🫣 June 18, 2025 at 2:11 AM, Denkó Jani (F.A.) : Mindjárt megyünk csak máshol is hiba van June 18, 2025 at 2:24 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 2:24 AM, Denkó Jani (F.A.) : Solved June 18, 2025 at 3:32 AM, FA-CS-AGV-Masoud : @Denkó Jani (F.A.) please check port M7MFA300_P29 Lift up/down error 1F June 18, 2025 at 3:33 AM, Denkó Jani (F.A.) : Megyek June 18, 2025 at 5:27 AM, Vadász Dóra SSL/B : Sziasztok Agv#15 hibán áll 9es cell packinggal szemben. Köszönöm June 18, 2025 at 5:29 AM, FA-CS-AGV-Masoud : Coming June 18, 2025 at 5:30 AM, FA-CS-AGV-Masoud : Solved June 18, 2025 at 5:52 AM, Sási Zsolt SL/C/ EOL : Jó reggelt. 13as AGVt kérlek küldjétek el. Szállításban akadályoz June 18, 2025 at 5:56 AM, FACS_Hyeongi Son : @FA/CS/AGV/Taimur June 18, 2025 at 5:56 AM, FA/CS/AGV/Taimur : Checking June 18, 2025 at 5:57 AM, Sási Zsolt SL/C/ EOL : Done June 18, 2025 at 5:57 AM, FA/CS/AGV/Taimur : Thank you. June 18, 2025 at 6:05 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek boxpackingre. Vákuum probléma June 18, 2025 at 6:05 AM, Zoltán Harasztia FA : Most megyünk át modulra June 18, 2025 at 6:06 AM, Zoltán Harasztia FA : Pár perc és ott vagyunk June 18, 2025 at 6:08 AM, Sási Zsolt SL/C/ EOL : Köszi June 18, 2025 at 6:18 AM, Zoltán Harasztia FA : Kész June 18, 2025 at 6:45 AM, R. József C SL EOL : 9_10 előtt útban van az agv, kérlek küldjétek el Paletta mozgatás van June 18, 2025 at 6:46 AM, R. József C SL EOL : Köszönöm June 18, 2025 at 6:46 AM, FA/CS/AGV/Taimur : Sure June 18, 2025 at 7:05 AM, Halász György SL : Good morning, Modul 1F line7 modul unloading, empty dunnage AGV delay June 18, 2025 at 7:05 AM, Halász György SL : Alarm at Wearhause June 18, 2025 at 7:06 AM, FA/CS/AGV/Taimur : This message was deleted. June 18, 2025 at 7:07 AM, Mohammad Amir : Good morning@FA @Zoltán Harasztia FA Please check M0STK037_P12 ,it is OOS and blocking empty pallet trasfer. Thank you very much. June 18, 2025 at 7:07 AM, Döme György F.A : Nézem June 18, 2025 at 7:10 AM, 윤성제(Yoon SungJe) : Please check quickly. Pallet is not coming. June 18, 2025 at 7:15 AM, Döme György F.A : Solved June 18, 2025 at 7:16 AM, Mohammad Amir : Köszönom szepen. 🙏 June 18, 2025 at 7:44 AM, Mohammad Amir : @Döme György F.A Please check M0STK012_P09 there is Light curtain error and it is blocking one job. Thank you very much! June 18, 2025 at 7:45 AM, FA/CS/AGV/Taimur : FA PLC support is working with debugging. Thank you June 18, 2025 at 7:45 AM, Mohammad Amir : Thank you very much for the update. June 18, 2025 at 8:50 AM, R. József C SL EOL : 13as agv útban van Küldjétek el kérlek Eol 9 előtt June 18, 2025 at 8:50 AM, R. József C SL EOL : Köszönöm June 18, 2025 at 8:51 AM, FA/CS/AGV/Taimur : Sure June 18, 2025 at 8:57 AM, Sarvajcz Ferenc FA : Kész June 18, 2025 at 11:43 AM, Halász György SL : Hi, Modul 1F line7 modul bufferport1 AGV error June 18, 2025 at 11:43 AM, Duna Don : Checking June 18, 2025 at 11:48 AM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 안녕하십니까. 모듈 도크장에 출하 파레트들 확인하러 갔다가 4면 라벨 프린트 품질 저하, 1면 프린트 하단부 짤림 현상 발견했습니다. 시간되실 때, 확인 부탁드리겠습니다. June 18, 2025 at 11:50 AM, Duna Don : It has already been solved. Thank you! June 18, 2025 at 11:50 AM, Sási Zsolt SL/C/ EOL : Sziasztok. 12es AGV áll a buffer előtt hibával a 9es sorral szemben. Kérlek nézzétek meg June 18, 2025 at 11:51 AM, Duna Don : Coming June 18, 2025 at 11:56 AM, 배병민 (Bae Byoungmin) : 해당 현상등은 대부분 라벨지 교체가 잘못되면 생기는 현상입니다. 지금 상태 확인은 해볼께요 @FACS_JaewonShin 4면 라벨 프린트 인쇄상태 확인 부탁드립니다 June 18, 2025 at 11:56 AM, FACS_JaewonShin : 확인해보겠습니다. June 18, 2025 at 12:20 PM, R. József C SL EOL : 7-8 sor előtt agv útban van Küldjétek el kérlek #18 agv June 18, 2025 at 12:20 PM, Sarvajcz Ferenc FA : Ok June 18, 2025 at 12:22 PM, R. József C SL EOL : Kész June 18, 2025 at 12:26 PM, R. József C SL EOL : 10-9 között is útban lesz az agv#10 Küldjétek el ezt is kérlek June 18, 2025 at 12:27 PM, R. József C SL EOL : 8-9 előtt is útban a #14 agv Ezt is kérlek June 18, 2025 at 12:30 PM, R. József C SL EOL : Boxpackingra kérnék segítséget Vacuum hiba June 18, 2025 at 12:34 PM, Sarvajcz Ferenc FA : Ok.. June 18, 2025 at 1:21 PM, R. József C SL EOL : Could it be possible to carry the pallets on 2 AGVs for box unpacking? @배병민 (Bae Byoungmin) June 18, 2025 at 1:22 PM, R. József C SL EOL : Unpacking now very slow June 18, 2025 at 1:23 PM, 배병민 (Bae Byoungmin) : We have made plans to change the AGV buffer to two units. This will be implemented soon. June 18, 2025 at 1:24 PM, Halász György SL : Hi, Modul 1F line7 modul lift out AGV error June 18, 2025 at 1:24 PM, R. József C SL EOL : Thank you June 18, 2025 at 1:24 PM, FA/CS/AGV/Taimur : Checking June 18, 2025 at 1:26 PM, R. József C SL EOL : I hope it will be ready as soon as possible today, the top cover is very small quantity June 18, 2025 at 1:34 PM, Sási Zsolt SL/C/ EOL : 4es sorral szemben a 13as AGV hibával áll a buffernél. Nézzétek meg kérlek June 18, 2025 at 1:34 PM, 배병민 (Bae Byoungmin) : It is difficult to change it right away. It is a part that needs to be changed after development in the system, and it is currently in progress. June 18, 2025 at 1:35 PM, FA/CS/AGV/Taimur : Checking June 18, 2025 at 1:37 PM, R. József C SL EOL : It's okay, thank you June 18, 2025 at 1:41 PM, Halász György SL : Thanks June 18, 2025 at 1:41 PM, Mohammad Amir : @Döme György F.A Please check M0STK012_P09 there is Light curtain error and it is blocking one job. Thank you very much! June 18, 2025 at 1:44 PM, FA/CS/AGV/Taimur : Solved June 18, 2025 at 1:46 PM, Mohammad Amir : Thank you very much 🙏 June 18, 2025 at 2:59 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 최근 박스 해체기로 투입도는 Too cover 휨 문제로 상태가 안좋은 제품은 별도 제거중입니다. 이로인해 박스 포장에 투입되는 Top cover 밸런스가 무너져 박스포장기가 간헐적으로 비가동상태가 되는 상황입니다. Top cover 수동 투입할수있는 여유분이 조금있으실까요? June 18, 2025 at 2:59 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남쪽 셀도크 GF 리프트 알람 확인 부탁드립니다 June 18, 2025 at 3:13 PM, FACS_오창훈_CHANGHOON : 조치되었습니다 June 18, 2025 at 5:21 PM, 배병민 (Bae Byoungmin) : 해당부분은 박스 해체기 투입을 상향 시켰습니다. AGV에서 해체기로 PLT 투입 속도가 빨라져서 박스 포장기 비가동은 문제되지 않을것으로 보여집니다. - 기존 : 2PLT 투입 소요시간 ㄴ12~13min - 변경 : 2PLT 투입 소요시간 ㄴ7~8min 2PLTBox Unpacker Empty PLT LR Quantity Change Completed. AGV LR = 1 > 2 Change June 18, 2025 at 5:38 PM, Halász György SL : Hi, Modul 1F line7 modul raw material AGV error June 18, 2025 at 5:38 PM, FA/CS/AGV/Taimur : Omw June 18, 2025 at 5:41 PM, R. József C SL EOL : Agv 9-10 eol előtt útban van Küldjétek el kérlek Köszönöm June 18, 2025 at 5:41 PM, FA/CS/AGV/Taimur : Sure June 18, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (1):Böröcz Tamás Sick (0):- Holiday (1): Kovács Szabolcs, Magyar Balázs Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András , Kiss Balázs , Böröcz Tamás Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 18, 2025 at 8:12 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 현재 R PLT만 풀어놓았습니다. 명일 변경 예정입니다 June 18, 2025 at 8:13 PM, 배병민 (Bae Byoungmin) : R PLT 수량이 야간에 충분하겠죠? 거의 소진된것으로 본거 같아서요 June 19, 2025 at 5:15 AM June 19, 2025 at 5:15 AM, 요셉 : Please move the agv between EOL 7 and 8L to the side Thanks June 19, 2025 at 5:17 AM, FA CS AGV Jawad : Sure.. June 19, 2025 at 6:38 AM, Halász György SL : Good morning, Modul GF line3 modul unloading AGV allarm June 19, 2025 at 6:38 AM, Sarvajcz Ferenc FA : Ok June 19, 2025 at 6:42 AM, FA/CS/AGV/Taimur : Solved thankyou June 19, 2025 at 6:44 AM, FA/CS/AGV/Taimur : @Mohammad Amir Can you delete the cmnd for port: M3MFA300_P05 GF_Module side The dunnage is not full for unload. Thank you June 19, 2025 at 6:45 AM, Mohammad Amir : Checking June 19, 2025 at 6:45 AM, Halász György SL : Thanks June 19, 2025 at 6:46 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 19, 2025 at 9:37 AM, Sási Zsolt SL/C/ EOL : Sziasztok. Kérlek az 5os sor elől küldjétek el az AGVket. Most állunk át más típusra June 19, 2025 at 9:40 AM, FA/CS/AGV/Taimur : Sure. June 19, 2025 at 10:11 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) FACS_team 화성 포장기 단에서 사이드 커버 라벨이 밑단 인쇄가 짤리거나 바코드가 뭉개져 리딩이 안되는 제품이 다수 발견되고 있습니다. 해당 공정 확인 부탁드리겠습니다 June 19, 2025 at 10:13 AM, FACS_JaewonShin : 일반적 생산중에는 문제없는것 확인했습니다만 라벨지가 거의 소진되었을때 발생하는 현상으로 보입니다. 현장에서 모니터링 하겠습니다 June 19, 2025 at 10:18 AM, 배병민 (Bae Byoungmin) : 라벨 또는 먹지 교체가 잘못되면 발생되는 현상입니다 June 19, 2025 at 11:16 AM, Mohammad Amir : @FA Please check M0STK011 there is PLC heartbeat stop Alaram. Thank you very much! June 19, 2025 at 11:17 AM, FACS_JaewonShin : Checking June 19, 2025 at 11:36 AM, Mohammad Amir : @FA @FACS_JaewonShin Please also check M0STK013_C02 there is Crane PLC interface Alaram. Thank you very much! June 19, 2025 at 11:55 AM, FACS_JaewonShin : Clear June 19, 2025 at 12:07 PM, Sási Zsolt SL/C/ EOL : 14es AGV áll hibával a 9es sorral szemben a Buffernel. Kérem ellenőrizzétek June 19, 2025 at 2:55 PM, Sási Zsolt SL/C/ EOL : 12es AGV áll hibával. Kérlek ellenőrizzétek June 19, 2025 at 2:56 PM, FA/CS/AGV/Taimur : Checking June 19, 2025 at 3:10 PM, Sási Zsolt SL/C/ EOL : Please come. AGKs are waiting June 19, 2025 at 3:11 PM, FA/CS/AGV/Taimur : On my way, I was occupied at 1F. June 19, 2025 at 3:11 PM, Sási Zsolt SL/C/ EOL : Thank you June 19, 2025 at 3:14 PM, FA/CS/AGV/Taimur : Solved, Thankyou for your patience June 19, 2025 at 4:11 PM, Sási Zsolt SL/C/ EOL : Kérlek a 4es sorrol küldjétek el a 9es AGV-t. Van egy paletta ami fordítva van a CV-n. June 19, 2025 at 4:11 PM, FA/CS/AGV/Taimur : Checking June 19, 2025 at 4:14 PM, Döme György F.A : I'm here June 19, 2025 at 4:27 PM, Halász György SL : Hi, Modul GF 3line row material agv allarm June 19, 2025 at 4:29 PM, FA/CS/AGV/Taimur : Checking June 19, 2025 at 4:29 PM, Sarvajcz Ferenc FA : Perfeckt, kollega👌 June 19, 2025 at 4:33 PM, FA/CS/AGV/Taimur : Neked es uram June 19, 2025 at 4:40 PM, Balázs Róbert SL : Line7,AGV-01 portstopped at the port June 19, 2025 at 4:41 PM, FA/CS/AGV/Taimur : Checking. On my way June 19, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1): Magyar Balázs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 19, 2025 at 6:05 PM, Éváné Bori Viktória : Mostk013-stk-op AGV 16 problem. Please check. June 19, 2025 at 6:16 PM, FACS_TaehyeongJin : Solved June 19, 2025 at 6:29 PM, Tóth Gyula : MOCNV036_M01 Megállt a cella betöltés. June 19, 2025 at 8:29 PM, Őri Imre : Modul 4 sorra nem érkezik cella! Már 2x újra lett indítva de nem javult a helyzet! Meg tudnátok nézni? Köszönöm! June 19, 2025 at 8:36 PM, N.Gábor F.A. : Megyek June 19, 2025 at 9:49 PM, Éváné Bori Viktória : Sziasztok! GF 1 buffer hibá jelez kérlek nézzétek meg. June 19, 2025 at 10:02 PM, Éváné Bori Viktória : Smc # 1 sew travel x fault June 19, 2025 at 10:12 PM, FACS_Youngmin LEE : solved June 20, 2025 at 12:10 AM June 20, 2025 at 12:10 AM, Éváné Bori Viktória : Sziasztok! Nem érkezik paletta az EOL 2 sorra kérlek nézzétek meg hátha ugyanaz a hiba mint múltkor. @N.Gábor F.A. @Dávid F.A. June 20, 2025 at 12:30 AM, Dávid F.A. : Nálunk minden raktár üzemkész nincsen probléma ellenőrztem minden rendben működik! VC 14 AGV szállítja majd ! June 20, 2025 at 12:31 AM, Dávid F.A. : Kész! June 20, 2025 at 12:33 AM, Éváné Bori Viktória : Köszi June 20, 2025 at 2:18 AM, Éváné Bori Viktória : Helló! Eol3 AGV 15 move please June 20, 2025 at 2:19 AM, FA CS AGV Jawad : Sure June 20, 2025 at 2:48 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok az Unboxpackingon az oldalfal leszedőnél vákum probléma van nézetek rá kérlek. June 20, 2025 at 2:50 AM, N.Gábor F.A. : Nézem June 20, 2025 at 2:58 AM, Dávid F.A. : Solved June 20, 2025 at 3:25 AM, FA CS AGV Jawad : @Shakir (MCS) bhae can you send this pallets back to its origin AGV 09 Pallet ID - U029175 June 20, 2025 at 3:26 AM, Shakir (MCS) : Working on it June 20, 2025 at 3:29 AM, Shakir (MCS) : Solved, Job initiated Thank you June 20, 2025 at 4:38 AM, Őri Imre : 3-4 sor között leált az egyik kis agv. June 20, 2025 at 4:38 AM, Őri Imre : Valaki rá tudna nézni? June 20, 2025 at 4:39 AM, FA CS AGV Jawad : I checj K June 20, 2025 at 4:41 AM, FA CS AGV Jawad : Solved June 20, 2025 at 4:41 AM, Őri Imre : Thx! June 20, 2025 at 6:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 20, 2025 at 6:16 AM, Tklcz Alexandra SL/A : Hi! EOL AGV 12 error near 3L in buffer. The light is green, but don't move. June 20, 2025 at 6:16 AM, FA/CS/AGV/Taimur : Checking June 20, 2025 at 7:31 AM, Tklcz Alexandra SL/A : Hi! Boxpacking: Unpacking side cover “servo error”. Please check. June 20, 2025 at 7:37 AM, Édl Tamás : Solved June 20, 2025 at 7:38 AM, Balázs Róbert SL : Hello! Can you help me,Line7 Dunnage loading,AGV alarm. June 20, 2025 at 7:38 AM, FA/CS/AGV/Taimur : Sure June 20, 2025 at 8:18 AM, Mohammad Amir : @Csepi Árpád Please check M0STK013_P03 there is light curtain error. Is there any maintenance? Thank you very much! June 20, 2025 at 8:24 AM, Brázik János : Solved June 20, 2025 at 8:25 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 8:27 AM, Tklcz Alexandra SL/A : Please move EOL AGV16 June 20, 2025 at 8:27 AM, FA/CS/AGV/Taimur : Sure June 20, 2025 at 8:31 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 잠시 R PLT 막고, Z PLT로 풀겠습니다. 추후 다시 변경하겠습니다. June 20, 2025 at 8:33 AM, Balázs Róbert SL : Another zone alarm,Line7, FA Station June 20, 2025 at 8:35 AM, 윤성제(Yoon SungJe) : Solved June 20, 2025 at 8:35 AM, Tklcz Alexandra SL/A : Please move AGV18. We need free place to EOL 7-8L. June 20, 2025 at 8:37 AM, Duna Don : Done ✅ June 20, 2025 at 8:53 AM, Tklcz Alexandra SL/A : Please move agv17 June 20, 2025 at 9:10 AM, Mohammad Amir : @Csepi Árpád Please check M0STK011_P12 there is Data mismatch error. Thank you very much! June 20, 2025 at 9:29 AM, Csepi Árpád : Solved June 20, 2025 at 9:30 AM, Mohammad Amir : Köszönom szepen 🙏 June 20, 2025 at 9:54 AM, Tklcz Alexandra SL/A : EOL AGV6 error. June 20, 2025 at 10:50 AM, [민겸]MinGyum : @배병민 (Bae Byoungmin) 박스해체기 Z PLT 풀어놨는데 투입이 안되고 있습니다. 확인 가능하신가요? June 20, 2025 at 10:51 AM, KIM SEYEON [김세연]_FA : @FACS_JaewonShin 팀장님 확인 부탁드립니다. June 20, 2025 at 10:51 AM, FACS_JaewonShin : 새로 LR 내려보겠습니다 June 20, 2025 at 10:53 AM, FACS_JaewonShin : 생성이 안됩니다. June 20, 2025 at 10:54 AM, Mohammad Amir : Sir, For F0BPM012_P13 there is no material exists,there is an active LR. We received 150 materials but it is getting filtered by RTD. Thank you very much! June 20, 2025 at 10:56 AM, Mohammad Amir : Additionally, It is getting filtered because of what next filter need Pallet type. Thank you very much! June 20, 2025 at 10:59 AM, Mohammad Amir : Sir, Please Reconcile the STK034/35 , currently the state of the pallet is Completed ,it should be either stored or Installed. That's the reason all materials are getting filtered. Thank you very much! June 20, 2025 at 11:28 AM, [민겸]MinGyum : 정상투입은 가능한건가요? June 20, 2025 at 11:31 AM, FACS_JaewonShin : 해체기는 정상가동상태입니다. 스태커도요 June 20, 2025 at 2:14 PM, Tklcz Alexandra SL/A : EOL AGV error please check. June 20, 2025 at 2:14 PM, FA/CS/AGV/Taimur : Checking June 20, 2025 at 2:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS team 남측 셀 도크장 완제품 입고시 UNK빌생하여 현장 확인 부탁드립니다. June 20, 2025 at 2:44 PM, SKOH2/제조-셀,모듈 출하/김병호 : GF 멈처 있습니다 June 20, 2025 at 2:50 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 남쪽 셀 도크장 GF 1) M0CNV036_M01 UNK 발생 2) M0CNV036_58_024 port R200992 기동 정지 상태 현제 셀트레이 입고 준비 중이라 빠른 확인 부탁드립니다 June 20, 2025 at 3:03 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_JaewonShin 해당 조치 오래걸리실까요? 저희 입고 작업이 밀려 있어서요. June 20, 2025 at 3:24 PM, FACS_JaewonShin : @mcs M0cnv036_m01 could you make manual input to stk034? June 20, 2025 at 3:24 PM, FACS_JaewonShin : Dup이후 목적지 생성이 안됩나다 June 20, 2025 at 3:24 PM, Mohammad Amir : Sure Sir Checking June 20, 2025 at 3:26 PM, FACS_JaewonShin : 30분 까지 조치안되면 dup인자재 빼고 다음자재 투입해주시면 됩니다 June 20, 2025 at 3:28 PM, Mohammad Amir : Sir Please try to Rackin again from M01. Thank you very much! June 20, 2025 at 3:29 PM, FACS_JaewonShin : @SKOH2/제조-셀,모듈 출하/김병호 재투입 부탁드립니다 June 20, 2025 at 3:37 PM, Mohammad Amir : This message was deleted. June 20, 2025 at 3:40 PM, Mohammad Amir : @FACS_JaewonShin Update :- Second Rackin was successful and now Materials flow form M0CNV036_M01 has been normalised. ✅ Thank you very much! June 20, 2025 at 5:32 PM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK011_C01 there is CRANE sew travel X fault ,it is blocking several jobs. Thank you very much! June 20, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.20 "B" műszak, 9+1+3/12+2 Tech, 1SL Overtime(1): Kertész Dániel Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kertész Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 20, 2025 at 7:38 PM, Nikolett SL/B EOL : Sziasztok 1 Buffer hibára állt ki kérlek gyertek Köszönöm June 20, 2025 at 7:39 PM, Denkó Jani (F.A.) : Megyünk mindjárt June 20, 2025 at 9:41 PM, Vadász Dóra SSL/B : Sziasztok Boxon vákuumhiba. Nézzetek rá kérlek. Köszönöm June 20, 2025 at 9:42 PM, Gerbovits Kevin : Megyünk June 20, 2025 at 10:02 PM, Gerbovits Kevin : Solved June 20, 2025 at 11:47 PM, Vadász Dóra SSL/B : Sziasztok Boxon safety hiba. Gondolom full szervo halál. Nézzetek rá kérlek June 20, 2025 at 11:48 PM, Gerbovits Kevin : Megyünk June 21, 2025 at 12:20 AM June 21, 2025 at 12:20 AM, Denkó Jani (F.A.) : Erősítést várunk,mert ez a villamos szekrénybe nyulkálós szitu nem a mi asztalunk 😂⚡⚡⚡ June 21, 2025 at 12:31 AM, Vadász Dóra SSL/B : Feladtad az igényt? 😁😁 June 21, 2025 at 12:57 AM, FACS_Youngmin LEE : solved June 21, 2025 at 1:12 AM, Vadász Dóra SSL/B : Sziasztok Boxon esemény. Transzfer szervo adta meg magát. Nézzetek rá kérlek June 21, 2025 at 1:21 AM, FACS_Youngmin LEE : solved June 21, 2025 at 6:06 AM, Tklcz Alexandra SL/A : Hi! Boxpacking Unpacking end of line yellow alarm f15000 consent power. Please check June 21, 2025 at 6:21 AM, Édl Tamás : Kész June 21, 2025 at 7:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 21, 2025 at 8:57 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team 남측 셀 도크장 GF L/F 원인없이 기동 정지 상태입니다. 제품 배출이 안되고 있어 빠른 확인 바랍니다 June 21, 2025 at 8:58 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS_team South cell dock GF L/F It's in a state of suspension without cause. The product is not being discharged Please check it as soon as possible June 21, 2025 at 8:59 AM, FACS_Wooseok Choi : 현장 이동 하겠습니다 June 21, 2025 at 9:05 AM, FACS_Bareum kim : M0CNV036-RTV IN/OUT LIFT 해당 2Unit만, Manual Mode로 되어 있었습니다. AutoMode 전환 후 정상가동 진행했습니다. June 21, 2025 at 9:47 AM, Tklcz Alexandra SL/A : Hi! Please check buffer near eol10. MOSTK011-STK-OP#3 June 21, 2025 at 9:47 AM, Tklcz Alexandra SL/A : Op2 June 21, 2025 at 9:50 AM, Tklcz Alexandra SL/A : EOL AGV16 near 5 L buffer error June 21, 2025 at 9:51 AM, FA/CS/AGV_ Asjad : Coming June 21, 2025 at 9:55 AM, FA/CS/AGV_ Asjad : Fixed June 21, 2025 at 10:49 AM, Édl Tamás : Koreai segítséggel,kész June 21, 2025 at 11:06 AM, Tklcz Alexandra SL/A : AGV in EOL please check. Restart. They all stand in one place. June 21, 2025 at 11:06 AM, FA/CS/AGV_ Asjad : Checking June 21, 2025 at 11:11 AM, Tklcz Alexandra SL/A : Please someone checking: No palette goes in the boxpacking unpacker. June 21, 2025 at 11:14 AM, FA/CS/AGV_ Asjad : Fixed June 21, 2025 at 11:42 AM, Tklcz Alexandra SL/A : EOL AGV14 near 9L error. June 21, 2025 at 11:44 AM, FA/CS/AGV_ Asjad : Fixed June 21, 2025 at 11:47 AM, 임남영(Lim Nam Young) : 4,5,6라인 공파렛트 투입이 안되고 있습니다 확인부탁드립니다 June 21, 2025 at 11:56 AM, FA/CS/AGV_ Asjad : @mcs Could you check this please. Thanks June 21, 2025 at 11:59 AM, duzzaman Md (MCS) : 4: on vehicle 5: there's active job and no issues from mcs 6: job was completed at 11:52. June 21, 2025 at 12:01 PM, duzzaman Md (MCS) : @FA Please check M0CNV023_LF22 GF stop time over. Thank you June 21, 2025 at 12:20 PM, Édl Tamás : Solved June 21, 2025 at 3:37 PM, Tklcz Alexandra SL/A : Please check AGV EOL10. Palett not in the cv. June 21, 2025 at 3:37 PM, FA/CS/AGV_ Asjad : Checking June 21, 2025 at 3:41 PM, FA/CS/AGV_ Asjad : Fixed June 21, 2025 at 4:13 PM, Tklcz Alexandra SL/A : Agv9 error in buffer near EOL10 June 21, 2025 at 4:14 PM, Tklcz Alexandra SL/A : Buffer and AGV error near EOL5. June 21, 2025 at 4:14 PM, FA/CS/AGV_ Asjad : Fixed June 21, 2025 at 4:55 PM, Tklcz Alexandra SL/A : Boxpacking: Unpacking alarm “label pc norespon”. Please checking. June 21, 2025 at 6:46 PM, 원승연(Seungyeon Won) : No pallets have been delivered to the box unpacking equipment. They haven’t arrived since 10 a.m. — please check. @MCS June 21, 2025 at 6:50 PM, VK (mcs) : There is no available material June 21, 2025 at 6:52 PM, 원승연(Seungyeon Won) : I confirmed that there are 196 Z pallets in the production warehouse. June 21, 2025 at 7:00 PM, VK (mcs) : They are filtered by RTD rule pallet type. June 21, 2025 at 7:21 PM, 원승연(Seungyeon Won) : @배병민 (Bae Byoungmin) PM님 죄송합니다. Z 팔레트 수량 조정했는데 안나오는 이유 확인 가능할까요? June 21, 2025 at 7:38 PM, Vadász Dóra SSL/B : Sziasztok A műszak első box vákuumhibája megjelent. Nézzetek rá kérlek. Köszönöm June 21, 2025 at 7:59 PM, [민겸]MinGyum : @FACS_JaewonShin 팀장님. 지금 완제품창고로 Z PLT가 투입안되고 있습니다. 확인 요청드립니다. June 21, 2025 at 8:08 PM, [민겸]MinGyum : @VK (mcs) Please help Z PLT to be put into the box dismantling machine. Production may be disrupted. June 21, 2025 at 8:10 PM, VK (mcs) : Unfortunately I haven’t permission to change the rules. June 21, 2025 at 8:10 PM, [민겸]MinGyum : Then, please contact someone who is available and solve it. June 21, 2025 at 8:16 PM, VK (mcs) : @Atom Yang(MCS/RTD) Dear manager Z PLT type is filtered by RTD to the unpacking cell machine. F0BPM012 Manufacturing team requested to release. Could you please check the situation. Thx June 21, 2025 at 8:23 PM, [민겸]MinGyum : @Atom Yang(MCS/RTD) 현재 완제품창고에서 해체기로 Z PLT(현대)가 투입이 안되고 있습니다. 생산이 중단 될수있습니다. 확인 요청드립니다. June 21, 2025 at 8:26 PM, VK (mcs) : @박태영 I apologise for the inconvenience. Could you please check the situation. Thanks in advance. June 21, 2025 at 8:27 PM, 박태영 : I’ll check June 21, 2025 at 8:43 PM, Atom Yang(MCS/RTD) : This message was deleted. June 21, 2025 at 8:48 PM, Atom Yang(MCS/RTD) : 다시 답글을 올립니다. RTD 제한 수량은 300이고, 34, 35 창고에 Empty Plate 가 390을 가지고 있어서 더 이상의 반송이 진행되지 않고 있습니다. June 21, 2025 at 8:49 PM, [민겸]MinGyum : 각 PLT별 300로 설정되는게 아닌가요? June 21, 2025 at 8:50 PM, [민겸]MinGyum : 전체 합쳐서 300개로 되는건가요? June 21, 2025 at 8:57 PM, Atom Yang(MCS/RTD) : RTD 조치하였습니다. 반송 가능 상태로 확인되었습니다. June 21, 2025 at 8:57 PM, [민겸]MinGyum : 네. 감사합니다. June 21, 2025 at 9:10 PM, Vadász Dóra SSL/B : Sziasztok Boxon újra vákuumhiba. Lessetek oda legyszi June 21, 2025 at 11:36 PM, 원승연(Seungyeon Won) : AGV #9 check plz June 21, 2025 at 11:36 PM, FA-CS-AGV-Masoud : Coming June 21, 2025 at 11:43 PM, FA-CS-AGV-Masoud : Solved June 22, 2025 at 12:23 AM June 22, 2025 at 12:23 AM, Vadász Dóra SSL/B : Noch einmal... June 22, 2025 at 12:26 AM, Denkó Jani (F.A.) : jdeme🫡 June 22, 2025 at 12:45 AM, Vadász Dóra SSL/B : Petiék kívánják a társaságot... Mutassátok meg nekik, ne kelljen ilyen gyakran mennetek June 22, 2025 at 12:46 AM, Denkó Jani (F.A.) : Hamarosan érkezünK June 22, 2025 at 1:27 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P05 PIO interface error June 22, 2025 at 1:27 AM, Zoltán Harasztia FA : Omv June 22, 2025 at 3:21 AM, Vadász Dóra SSL/B : Sziasztok Full szervo hiba szatír oldalon. Kicsit belementem a fényfüggönybe June 22, 2025 at 3:22 AM, Zoltán Harasztia FA : Megyünk June 22, 2025 at 4:17 AM, 원승연(Seungyeon Won) : AGV 15 check plz June 22, 2025 at 4:18 AM, FA-CS-AGV-Masoud : Coming June 22, 2025 at 4:20 AM, FA-CS-AGV-Masoud : Solved June 22, 2025 at 4:52 AM, Vadász Dóra SSL/B : Újabb vákuumhiba boxon... Nézzétek meg kérlek June 22, 2025 at 4:54 AM, Denkó Jani (F.A.) : Photo June 22, 2025 at 4:55 AM, Vadász Dóra SSL/B : Sáskajárás vótmá?! June 22, 2025 at 4:57 AM, Denkó Jani (F.A.) : Photo June 22, 2025 at 6:07 AM, Szijjártó Balázs : We need help! Module, 1F, Line 7. The small AGV (#3) is stuck in the port. Thanks! June 22, 2025 at 6:08 AM, FA/CS/AGV_ Asjad : Fixed June 22, 2025 at 6:37 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 22, 2025 at 7:43 AM, Szijjártó Balázs : Modul 1F, Line 7, warehouse c/v. CV017 Stop detect error Check it pls! June 22, 2025 at 7:57 AM, Csepi Árpád : Solved June 22, 2025 at 8:03 AM, Szijjártó Balázs : Line 7 BMA buffer port up/down error. We need help! Thanks! June 22, 2025 at 9:10 AM, Tklcz Alexandra SL/A : Hi! GF buffer upstairs alarm. Please check. June 22, 2025 at 9:20 AM, Csepi Árpád : Solved June 22, 2025 at 10:37 AM, Tklcz Alexandra SL/A : AGV15 error in buffer. Near EOL9 June 22, 2025 at 10:39 AM, FA/CS/AGV_ Asjad : Fixed June 22, 2025 at 1:45 PM, Szijjártó Balázs : Line 7, Endplate gentry. "Gripper clamp tray not detect error" We tried to fix it, but it was no good. Check it pls! June 22, 2025 at 2:05 PM, Tklcz Alexandra SL/A : EOL AGV 16 please check. There is a traffic jam. June 22, 2025 at 2:06 PM, FA/CS/AGV_ Asjad : Coming June 22, 2025 at 2:07 PM, FA/CS/AGV_ Asjad : Fixed June 22, 2025 at 5:55 PM, Nikolett SL/B EOL : Sziasztok Eol 5-6 sor előtt a 16 AGV hibára állt ki valaki tudna jönni? Köszönöm June 22, 2025 at 5:56 PM, FA-CS-AGV-Masoud : Coming June 22, 2025 at 5:57 PM, FA-CS-AGV-Masoud : Solved June 22, 2025 at 5:58 PM, FA-CS-AGV-Masoud : @Fa Please check M0STK013_P01 PIO interface error June 22, 2025 at 6:01 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.22 "B" műszak, 7+2+4/12+2 Tech, 1SL Overtime(4): Harasztia Zoltán, Gégény Dávid, Kertész Dániel, Fabriczius Gergely Holiday(3): Pintye Miklós, Gerbovits Kevin, Böröczki Balázs Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Takács Ádám --------------- Assy 1F (2): Gégény Dávid, Fab June 23, 2025 at 12:51 AM June 23, 2025 at 12:51 AM, 원승연(Seungyeon Won) : AGV 12 check plz thanks! June 23, 2025 at 12:51 AM, FA-CS-AGV-Masoud : Coming June 23, 2025 at 12:54 AM, FA-CS-AGV-Masoud : Solved June 23, 2025 at 2:00 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA please check M0STK011_P05 C/V data mismatch nothing error June 23, 2025 at 2:03 AM, Zoltán Harasztia FA : Coming June 23, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid, Magyar Balázs June 23, 2025 at 6:32 AM, Nagy Mónika : Jó reggelt, Segítséget kèrnèk a Line 4 kitöltèshez. Nagy AGV probléma. Köszönöm! June 23, 2025 at 6:33 AM, FA/CS/AGV_ Asjad : checking June 23, 2025 at 6:40 AM, FA/CS/AGV_ Asjad : Fixed June 23, 2025 at 9:28 AM, Szijjártó Balázs : Egy kis segítségre lenne szükség a Line 1 Endplatenél. Köszi! June 23, 2025 at 9:31 AM, N.Gábor F.A. : Amint tudunk érkezünk June 23, 2025 at 9:32 AM, Szijjártó Balázs : Oksa, köszi! June 23, 2025 at 10:15 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 금일 805셀 출하 제품에서 사이드커버에 Plt id 인쇄부분에서 하단부분이 짤려 있어 바코드 리딩에 어렵습니다. 해당 공정 확인 부탁드립니다. June 23, 2025 at 10:16 AM, FACS_JaewonShin : 확인해보겠습니다. June 23, 2025 at 10:29 AM, 정낙정(JEONG NAK JEONG) : @배병민 (Bae Byoungmin) 최초 S102638 파레트 cell buffer내 0312 창고전산으로 확인되어서 출고해보니 T703912 파레트가 출고 되었고, T703912 출고후에 재투입하는도중 DATA MISSMATCH발생하여 확인해보니 M0STK012_P10에서 WAIT_OUT상태로 있습니다. June 23, 2025 at 10:38 AM, 배병민 (Bae Byoungmin) : 실물이 Rack to Rack 컨베어에 있는건가요? 데이터는 없습니다 June 23, 2025 at 11:09 AM, FACS_JaewonShin : Line 1 endplate didnt send LR and UR Does someone check this? June 23, 2025 at 11:10 AM, FACS_JaewonShin : 모듈1라인 생산설비에서 end plate 이재기에 LR또는UR을 주고있지 않습니다. 해당관련 확인가능할까요? June 23, 2025 at 11:19 AM, Mohammad Amir : Dear Sir, Could you please press again. I am checking. Thank you very much! June 23, 2025 at 11:24 AM, Mohammad Amir : Sir, Please confirm me ports as well. Is it Module line 1-P25(End Plate Buffer ) and P26/27(End Plate)? Thank you very much! June 23, 2025 at 11:33 AM, Őri Imre : Modul 3-4 sor között a kis AGV elakadt betöltés közben! Valaki rá tudna nézni? Köszönöm! June 23, 2025 at 11:34 AM, FA/CS/AGV_ Asjad : Solved June 23, 2025 at 1:45 PM, Szijjártó Balázs : 15-ös AGV a Line 1 mögött kicsit megzavarodott,a parkoló AGV-t is akadályként érzékeli. June 23, 2025 at 1:46 PM, FA/CS/AGV_ Asjad : Coming June 23, 2025 at 1:51 PM, FA/CS/AGV_ Asjad : Solved already June 23, 2025 at 1:51 PM, Szijjártó Balázs : Thanks! June 23, 2025 at 1:52 PM, FA/CS/AGV_ Asjad : You’re welcome June 23, 2025 at 2:35 PM, Mohammad Amir : For your information:- @FACS_JaewonShin Sir, We didn't receive any LR still from Modul line -1 P26 and P27 ports. We did receive UR from M1MFA300_P25 at 9:22 but it was not successful because we didn't receive LR from P26 and P27. Thank you very much! June 23, 2025 at 3:41 PM, Őri Imre : Modul 3-4 sor között a kis AGV elakadt betöltés közben! Valaki rá tudna nézni? Köszönöm! June 23, 2025 at 3:41 PM, Duna Don : Checking June 23, 2025 at 3:42 PM, Duna Don : Solved! June 23, 2025 at 7:51 PM, Balázs Róbert SL : Modul 1-2sor között kis AGV meg állt. Valaki rá tudna nézni? Köszönjük June 23, 2025 at 7:51 PM, FA-CS-AGV-Masoud : Coming June 23, 2025 at 7:54 PM, FA-CS-AGV-Masoud : Solved June 23, 2025 at 10:56 PM, 원승연(Seungyeon Won) : AGV 12 check plz thanks! June 23, 2025 at 10:58 PM, FA-CS-AGV-Masoud : Solved June 24, 2025 at 12:34 AM June 24, 2025 at 12:34 AM, Sási Zsolt SL/C/ EOL : Please check AGV8. Thank you June 24, 2025 at 12:34 AM, FA-CS-AGV-Masoud : Coming June 24, 2025 at 12:39 AM, R. József C SL EOL : @Zoltán Harasztia FA Gyertek kérlek boxpackingra, el kellene küldeni az agv-ket, mindjárt megy a targis levenni egy palettát a betöltésről June 24, 2025 at 12:40 AM, Döme György F.A : Megyek June 24, 2025 at 12:40 AM, R. József C SL EOL : Köszönöm June 24, 2025 at 12:47 AM, R. József C SL EOL : 9es sorral szemben buffer portnál agv riasztással áll, kérlek nézzétek meg June 24, 2025 at 12:48 AM, FA-CS-AGV-Masoud : Solved June 24, 2025 at 12:49 AM, R. József C SL EOL : Thanks June 24, 2025 at 2:16 AM, Sási Zsolt SL/C/ EOL : Please check AGV15. Thank you June 24, 2025 at 2:17 AM, FA-CS-AGV-Masoud : Otw June 24, 2025 at 2:19 AM, FA-CS-AGV-Masoud : Solved June 24, 2025 at 3:04 AM, R. József C SL EOL : Gyertek kérlek boxpackingra Topcovernál van transfer probléma Z tengelyen Servo probléma June 24, 2025 at 3:05 AM, Zoltán Harasztia FA : Megyek June 24, 2025 at 5:14 AM, R. József C SL EOL : Eol10 előtt 17-es agv riaszt Nézzétek rá kérlek June 24, 2025 at 5:15 AM, FA-CS-AGV-Masoud : Solved June 24, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+1 Overtime (1): Cehman Zsolt Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Cehman Zsolt Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Martina Dávid, Magyar Balázs June 24, 2025 at 6:12 AM, R. József C SL EOL : Jó reggelt Boxpackingra kérlek nézzetek rá Koreai F.A. kollégák már ott vannak 1.pántolonál van gond Bontó oldalon a topcovernál lerakás közben servora ír hibát June 24, 2025 at 6:12 AM, R. József C SL EOL : Köszönöm June 24, 2025 at 6:55 AM, Éváné Bori Viktória : Helló AGV 9, AGV 12 move please June 24, 2025 at 6:56 AM, FA/CS/AGV/Taimur : Sure June 24, 2025 at 7:29 AM, FACS_Wooseok Choi : F.A come to boxpacking pls June 24, 2025 at 7:30 AM, N.Gábor F.A. : Im going June 24, 2025 at 8:10 AM, Őri Imre : Jo reggelt! June 24, 2025 at 8:10 AM, Őri Imre : Modul 4 sor end plate gentry nem veszi ki az utolsó ládát! June 24, 2025 at 8:11 AM, Őri Imre : Emiatt nem cseréli ki az üres raklapot telire! June 24, 2025 at 8:11 AM, Őri Imre : Meg tudnátok nézni? June 24, 2025 at 8:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team, MCS/RTD @배병민 (Bae Byoungmin) M0STK034 location : 0201802 carrier id : Z101651 Dest EQP : M0CNV036_M02 해당제품 RTD/MCS에서 검색이 안되고 있습니다. 금일 오전 출하 제품이라 수동 출고 빠르게 부탁드립니다. June 24, 2025 at 8:14 AM, SKOH2/제조-셀,모듈 출하/김병호 : 해당 제품 전산 누락이 왜 되었는지도 확인 부탁드립니다. 간헐적으로 계속 이런 일이 발생하여 상위에서 왜 누락이 되었을까요? June 24, 2025 at 8:16 AM, 윤성제(Yoon SungJe) : solved June 24, 2025 at 8:17 AM, Mohammad Amir : This message was deleted. June 24, 2025 at 8:17 AM, Mohammad Amir : Good morning I am checking the reason. Thank you very much! June 24, 2025 at 8:20 AM, Mohammad Amir : Dear @SKOH2/제조-셀,모듈 출하/김병호 , The reason why this carrier is not found in MCS RTD database is that this carrier was deleted by and adminitrator user "so22978" at 18th June 4:53. Please let me know if you need further information. Thank you very much! June 24, 2025 at 8:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : @배병민 (Bae Byoungmin) pm님 안녕하세요 해당제품이 관리자 권한으로 삭제 되었다고 합니다. 제품이 있는상태에서 삭제가 되었다면 원상복구해주셔야 저희가 작업을 할수있습니다. 매번 저희가 찾아서 알려 드릴수 없어, 해당건에 대하여 내용 전달 부탁드립니다. June 24, 2025 at 8:25 AM, SKOH2/제조-셀,모듈 출하/김병호 : Please take out the product M0CNV036_M02 June 24, 2025 at 8:28 AM, FACS_Wooseok Choi : @Mohammad Amir Can you make a job? June 24, 2025 at 8:28 AM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 24, 2025 at 8:29 AM, Mohammad Amir : Sir, Unfortunately this carrier is not available in MCS and RTD database that's why I am not able to make a job. In this case only manual tranfer is possible. Thank you very much! June 24, 2025 at 8:30 AM, FACS_오창훈_CHANGHOON : Checking. June 24, 2025 at 8:30 AM, Mohammad Amir : Sir, There could be one more solution:- If you please confirm me correct location of this carrier ,I can reinstall the carrier and try making job again. Thank you very much! June 24, 2025 at 8:32 AM, FACS_Hyeongi Son : M0STK034_0201802 ->M0CNV036_M02 June 24, 2025 at 8:32 AM, Mohammad Amir : Sure Sir,I am working on it. June 24, 2025 at 8:33 AM, FACS_Hyeongi Son : @FACS_오창훈_CHANGHOON @FACS_Wooseok Choi June 24, 2025 at 8:34 AM, 배병민 (Bae Byoungmin) : 네 확인해보겠습니다. June 24, 2025 at 8:36 AM, FACS_오창훈_CHANGHOON : It's moving June 24, 2025 at 8:37 AM, Mohammad Amir : Yes Sir, I have successfully reinstall the carrier and send it to the CNV036_M02. You may collect from there ✅. I am monitoring for smooth transfer. Thank you very much! June 24, 2025 at 8:37 AM, Mohammad Amir : Dear Respected member @SKOH2/제조-셀,모듈 출하/김병호 @FACS_Hyeongi Son For your information. Thank you very much! June 24, 2025 at 8:41 AM, Mohammad Amir : Dear @All Update:- Carrier Z101651 has successfully arrived at M0CNV036_M02 at 8:41 ✅. Thank you very much! June 24, 2025 at 8:42 AM, 연해리 : @권기홍 @양원석 @김주연 안녕하세요 PM님 6월 18일 한국시간 11:53에 so22978 계정으로 화성 셀 팔레트를 삭제하셔서 금일 출하작업에 지연이 발생하였습니다. 해당 계정 사용자분께서 직접 접속이 가능하신 시간은 아닌 것 같은데,, 혹시 본사 내부적으로 해당 계정을 공유로 사용하시고 계신지, 어떤분께서 계속 삭제를 하시는지 이력 확인 한번만 부탁드립니다. June 24, 2025 at 8:46 AM, 김주연 : RTD 계정 삭제요청 하겠습니다. June 24, 2025 at 9:04 AM, 연해리 : 감사합니다 June 24, 2025 at 10:04 AM, Mohammad Amir : @N.Gábor F.A. Please check M0STK011_C01 there is CRANE saw travel X fault error. Thank you very much! June 24, 2025 at 10:04 AM, N.Gábor F.A. : Checking June 24, 2025 at 10:13 AM, N.Gábor F.A. : Solved June 24, 2025 at 10:13 AM, Mohammad Amir : Thank you very much! June 24, 2025 at 10:49 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok! Szeretnék segitséget kérni a box paclinghoz a LVL 1-es pártoló jobb oldalsó pártoló feje minden pántolásnál beszakitja a pontot vagy eldobja kérlek elenőrizétek a problémát és amennyiben lehet javítsátok. June 24, 2025 at 11:03 AM, Dávid F.A. : Rossz paraméterek voltak megadva Band-2 settingben most már folyamatosan üzemel! Készen van! June 24, 2025 at 11:06 AM, Czébely Dániel SL—D : Emoticons June 24, 2025 at 11:51 AM, Nagy Mónika : Sziasztok, line3-4 vonalon nem jönnek az AGV-k. Nézzetek rà kérlek. Köszönöm.🙂 June 24, 2025 at 11:52 AM, FA/CS/AGV/Taimur : Checking June 24, 2025 at 11:52 AM, Mohammad Amir : This message was deleted. June 24, 2025 at 11:52 AM, Mohammad Amir : AGV#10 on the way to EOL-3and AGV#17 on the way to EOL-4. ✅ Thank you very much! June 24, 2025 at 12:05 PM, Dávid F.A. : Thanks for the information! June 24, 2025 at 12:06 PM, Mohammad Amir : You are most welcome! June 24, 2025 at 12:14 PM, 윤성제(Yoon SungJe) : @Mohammad Amir Hello, can you delete the JOB for M8MFA300_P19 SMP2506020010? Due to UR and above, I manually removed it from AGV June 24, 2025 at 12:14 PM, Mohammad Amir : Sure Sir, Checking! June 24, 2025 at 12:15 PM, Mohammad Amir : Sir, Job has been cancelled successfully as requested ✅. Thank you very much! June 24, 2025 at 12:19 PM, 윤성제(Yoon SungJe) : Thank you very much! June 24, 2025 at 12:19 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you need further assistance. June 24, 2025 at 5:16 PM, [민겸]MinGyum : pm님. 해당 plt 재투입이 가능한건가요? June 24, 2025 at 5:16 PM, Őri Imre : Modul 4 sor LWR betöltésnél a gentry folyamatosan letillt mikor ráfog a ládára! Meg tudnátok nézni? Köszönöm June 24, 2025 at 5:16 PM, 배병민 (Bae Byoungmin) : 네 수동포트로 재투입 하셔도 됩니다 June 24, 2025 at 5:17 PM, [민겸]MinGyum : 네. 확인 감사합니다. June 24, 2025 at 5:19 PM, Dávid F.A. : Solved! June 24, 2025 at 5:40 PM, Éváné Bori Viktória : Helló! Eol 10 AGV 15 move please. June 24, 2025 at 5:50 PM, FA CS AGV Jawad : I do June 24, 2025 at 5:52 PM, FA CS AGV Jawad : Solved June 24, 2025 at 6:24 PM, 원승연(Seungyeon Won) : The box unpacking equipment has not been operating since 14:13. Please check it. June 24, 2025 at 6:27 PM, 배병민 (Bae Byoungmin) : 공팔레트는 있나요? June 24, 2025 at 6:28 PM, 원승연(Seungyeon Won) : 네네 R팔레트 재고 필요해서 버퍼 수량 변경하였고, 지금 완제품창고에 34개 있습니다 June 24, 2025 at 6:33 PM, 배병민 (Bae Byoungmin) : 수량 변경후에도 잡이 안생기는거죠? 확인 좀 해보겠습니다 June 24, 2025 at 6:35 PM, Zoltán Harasztia FA : The box unpacking is not working because the top cover section of the unpacking machine is full. Now that the box packing has started, the materials will start to decrease, and the unpacking machine will also start operating. June 24, 2025 at 6:38 PM, 배병민 (Bae Byoungmin) : 박스포장기 가동이 적어서 포장재 브릿지에 포장재 버퍼가 Full이되어서 해제기가 멈춰 있는 경우입니다. June 24, 2025 at 6:40 PM, 원승연(Seungyeon Won) : 확인 감사합니다! June 24, 2025 at 7:26 PM, 원승연(Seungyeon Won) : Plz check AGV 13 June 24, 2025 at 7:30 PM, FA CS AGV Jawad : Sure June 24, 2025 at 9:15 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Valerii szólt hogy van egy kisebb probléma June 24, 2025 at 9:16 PM, Sarvajcz Ferenc FA : Itt vagyunk June 24, 2025 at 9:17 PM, Zoltán Harasztia FA : Kész June 25, 2025 at 4:11 AM June 25, 2025 at 4:11 AM, FA CS AGV Jawad : @Zoltán Harasztia FA can u plz check STK 11, crane error June 25, 2025 at 4:12 AM, Döme György F.A : Checking June 25, 2025 at 5:23 AM, Sási Zsolt SL/C/ EOL : 2es sorra nem hoz üres palettát az AGV kérlek nézzétek meg June 25, 2025 at 5:24 AM, Döme György F.A : Nézem June 25, 2025 at 5:25 AM, Zoltán Harasztia FA : Hibában van a 12-es raktár most megyünk June 25, 2025 at 5:33 AM, Döme György F.A : Volt egy adat beragadás a porton.AGV16 viszi mimdjárt. June 25, 2025 at 6:21 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 25, 2025 at 6:40 AM, Tklcz Alexandra SL/A : Hi! Please move EOL AGV17. June 25, 2025 at 6:40 AM, FA/CS/AGV/Taimur : Sure June 25, 2025 at 8:27 AM, 신동준_Shin DongJun left this chatroom. June 25, 2025 at 9:12 AM, Mohammad Amir : @FA @Csepi Árpád Please check M0STK011_M01 there is Home return error and also C01/C02 is OOS. Also check M0STK013_C01/C02 it is also OOS. Thank you very much! June 25, 2025 at 9:38 AM, 최준영(JoonYoung Choi) : GF 버퍼창고 1,3Line 에러 조치로 인해 EOL 1~10Line 가동 라인 셀 포장기 자동화 불가 현재 투,배출 수동으로 작업 진행하고있습니다. 금일 11시에 1~6Line 고객사 방문 예정으로 확인 부탁 드리겠습니다. June 25, 2025 at 9:41 AM, 요셉 : EOL 1-6L agv Please move to the side June 25, 2025 at 9:41 AM, FA/CS/AGV/Taimur : Sure June 25, 2025 at 9:43 AM, 최준영(JoonYoung Choi) : EOL 1~10Line cellPackingPlease empty all AGVs in front. June 25, 2025 at 9:43 AM, FA/CS/AGV/Taimur : On it June 25, 2025 at 10:12 AM, 최준영(JoonYoung Choi) : 버퍼 창고 에러조치 완료되어 셀 포장기 투,배출 모드 자동화 하겠습니다 감사합니다~! June 25, 2025 at 12:54 PM, Tklcz Alexandra SL/A : EOL AGV 12 in buffer error June 25, 2025 at 12:55 PM, Duna Don : Checking June 25, 2025 at 12:56 PM, Duna Don : Solved June 25, 2025 at 1:35 PM, Telkes Tamás SL A : The entrance of EOL lines 9-10 should be cleared. Please move AGV13 June 25, 2025 at 1:35 PM, Telkes Tamás SL A invited Bálint. June 25, 2025 at 1:35 PM, FA/CS/AGV/Taimur : Sure June 25, 2025 at 2:57 PM, Tklcz Alexandra SL/A : MOSTK011-STK-OP 2 error. Near eol10. June 25, 2025 at 3:06 PM, Brázik János : Solved June 25, 2025 at 3:52 PM, [민겸]MinGyum : @배병민 (Bae Byoungmin) PM님 전일에 같은 T703912 수동투입시에 PORT_VALIDATION_TIME OUT발생해서 투입이 되지 않았습니다. 확인 요청드립니다. June 25, 2025 at 3:55 PM, Telkes Tamás SL A : The entrance of EOL lines 9-10 should be cleared. Please move AGV6 June 25, 2025 at 3:56 PM, FA/CS/AGV/Taimur : Sure. June 25, 2025 at 4:02 PM, Bálint : The entrance of EOL lines 9-10 should be cleared. Please move AGV8 June 25, 2025 at 4:03 PM, FA/CS/AGV/Taimur : We can temporarily restrict this AGV route if you need it for longer time? June 25, 2025 at 4:04 PM, Bálint : Only one more palet. 5 minute June 25, 2025 at 4:11 PM, 배병민 (Bae Byoungmin) : 혹시 중복 아이뒤인지 확인 가능하실까요? Validation NG면 중복 아이뒤 아니면 바코드 문제로 BCR fail 입니다 June 25, 2025 at 4:16 PM, [민겸]MinGyum : 중복된 아이디는 아니었습니다. 라벨 바꾸고 다시 투입해보겠습니다. June 25, 2025 at 4:34 PM, Telkes Tamás SL A : The entrance of EOL lines 8-9 should be cleared for 15 minutes. Please move AGV6 June 25, 2025 at 4:45 PM, Telkes Tamás SL A : I finished moving pallets, thank you June 25, 2025 at 5:00 PM, 요셉 : EOL 1L agv Please move to the side June 25, 2025 at 5:00 PM, FA/CS/AGV/Taimur : Sure June 25, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.25. "B" műszak, 11+2+2/12+2 Tech, 1SL Overtime(2): Gégény Dávid, Kertész Dániel Holiday(1): Böröczki Balázs Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Kovács Ágnes --------------- Assy 1F (3): Gégény Dávid, Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovits Kevin, Denkó János, June 25, 2025 at 11:53 PM, FACS_Hyeongi Son : @SL The workers of the box packing machine went to another place, but there is no more work on the box semover and packing line today? June 25, 2025 at 11:54 PM, Vadász Dóra SSL/B : There is no box packaging task for now. When there are 50 pallets, it will restart. Until then, the operator will be doing other work. June 25, 2025 at 11:56 PM, FACS_Hyeongi Son : Is it the same for box unpacking? June 25, 2025 at 11:57 PM, Vadász Dóra SSL/B : If it works without errors, it can be started. But there is no operator in the area, so we will not receive a notification in the event of a machine error. June 26, 2025 at 12:02 AM June 26, 2025 at 12:02 AM, 임남영(Lim Nam Young) : Eol1,2Line empty Pallet is not coming in, please check June 26, 2025 at 12:10 AM, Denkó Jani (F.A.) : Going June 26, 2025 at 12:15 AM, Denkó Jani (F.A.) : Solved June 26, 2025 at 12:16 AM, 임남영(Lim Nam Young) : I don't think it's solved. Empty palet is not being put in from lines 1 tO 6 @Denkó Jani (F.A.) June 26, 2025 at 12:23 AM, FACS_TaehyeongJin : 16번 AGV 1라인으로 반송중입니다 June 26, 2025 at 3:10 AM, FA CS AGV Jawad : @VK (mcs) can you plz send this pallet back to its source AGV 10 - end produxt Pallet ID - U027735 June 26, 2025 at 3:17 AM, VK (mcs) : Transport command created June 26, 2025 at 3:17 AM, FA CS AGV Jawad : Thanks June 26, 2025 at 6:50 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 26, 2025 at 8:15 AM, Tklcz Alexandra SL/A : Hi! EOL 10L agv12 error. June 26, 2025 at 8:15 AM, FA/CS/AGV/Taimur : Checking June 26, 2025 at 8:50 AM, Tklcz Alexandra SL/A : EOL near 9 L, AgV14 error in buffer June 26, 2025 at 8:51 AM, FA/CS/AGV/Taimur : Checking June 26, 2025 at 9:04 AM, Tklcz Alexandra SL/A : Agv 12 same place June 26, 2025 at 9:06 AM, Duna Don : Solved June 26, 2025 at 11:09 AM, Tklcz Alexandra SL/A : Please move AGV15 EOL June 26, 2025 at 11:10 AM, FA/CS/AGV/Taimur : Sure June 26, 2025 at 11:43 AM, Tklcz Alexandra SL/A : EOL AGV 17 and 15 error June 26, 2025 at 11:45 AM, FA/CS/AGV/Taimur : Solved June 26, 2025 at 5:04 PM, Tklcz Alexandra SL/A : Near eol 9 agv 16 error in buffer June 26, 2025 at 5:04 PM, FA/CS/AGV/Taimur : Checking June 26, 2025 at 5:14 PM, Tklcz Alexandra SL/A : Eol agv 13 error June 26, 2025 at 5:50 PM, Tklcz Alexandra SL/A : Near 9L in buffer agv error June 26, 2025 at 5:51 PM, FA CS AGV Jawad : I check it June 26, 2025 at 5:53 PM, FA CS AGV Jawad : Solved June 26, 2025 at 6:19 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam @Fa 남측 셀 완제품 창고 M0STK035 크레인 정지상태입니다. 빠른 확인 부탁드립니다 June 26, 2025 at 6:19 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACSteam @Fa South cell fwarehouse M0STK035 The crane is suspended. Please check it as soon as possible June 26, 2025 at 6:35 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.26 2.Machine name : -M0STK035 3. Action detail : -콜랩스 센서 에러 조치 4.Work time -Start : 18:35 -End : 5. Remark(specialote) : -X June 26, 2025 at 6:44 PM, 유경호(RYU KYEONGHO) : @fa please check box unpacking top cover vacuum problem. June 26, 2025 at 6:46 PM, SKOH2/제조-셀,모듈 출하/김병호 : 작업이 언제 끝나시는걸까요? 5시 16분에 반송한 제품이 아직도 안들어 가고 있었던 사항입니다 지금 두번째 셀트레이 입고 작업 준비 중입니다. 복구 가능시간 확인 부탁드립니다. June 26, 2025 at 6:47 PM, FACS_Youngmin LEE : 30분 소요예정 입니다. June 26, 2025 at 6:51 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 빠른 조치 부탁드립니다. June 26, 2025 at 6:53 PM, 채효석(Hyoseok CHAE) : "Please send the AGV from Line 9 to another location." June 26, 2025 at 6:53 PM, FA CS AGV Jawad : Sure June 26, 2025 at 6:54 PM, Denkó Jani (F.A.) : Solved June 26, 2025 at 6:57 PM, FACS_Youngmin LEE : 조치되었습니다. June 26, 2025 at 6:58 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.26 2.Machine name : -M0STK035 3. Action detail : -콜랩스 센서 에러 조치 4.Work time -Start : 18:35 -End : 18:58 5. Remark(specialote) : -X June 26, 2025 at 7:09 PM, SKOH2/제조-셀,모듈 출하/김병호 : 지금 넣으면 되나요? June 26, 2025 at 7:09 PM, FACS_Youngmin LEE : 네 June 26, 2025 at 7:21 PM, 배병민 (Bae Byoungmin) : 콜랩스 에러 원인이 무엇인가요? June 26, 2025 at 7:23 PM, FACS_Youngmin LEE : 파레트가 약간 사행으로 들어와서 바닥에서 천장으로 쏴주는 센서가 파레트에 가려져 수광되지 않아 콜렙스4 알람이 떴었습니다. June 26, 2025 at 7:25 PM, 배병민 (Bae Byoungmin) : 네 고생하셨습니다 해당 크레인 조치등 하실때에는 서둘러서 하지 말아 주세요 안전하게 작업 부탁드립니다. 위험 작업이라 안전이 우선입니다 June 27, 2025 at 12:10 AM June 27, 2025 at 12:10 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) 현재 셀버퍼창고 적재율이 배런스 문제로 모듈쪽 생산에 Loss가 되고 있습니다. 1번, 2번 창고 적재율이 99% 이상으로 마비가 된 상황이며 공팔레트 적재율이 너무 높은 상황입니다. # 셀버퍼창고 적재율 현황 1번창고 Full 16.32% Empty 83.68% 2번창고 Full 90.31% Empty 9.69% 3번창고 Full 6.73% Empty 93.27% 4번창고 Full 89.41% Empty 10.59% June 27, 2025 at 12:18 AM, 노영일 (Yeongil Noh) : 적재율은 97~98% 리미트 걸려있지 않나요? June 27, 2025 at 12:23 AM, 배병민 (Bae Byoungmin) : 네 적재율 리미트는 98% 입니다. 다만, 모듈에서 공급하는 공팔레트의 목적지 우선순위가 1번, 3번 창고이며 현재 1번 3번 창고 또한 99% 이상입니다 June 27, 2025 at 12:38 AM, 노영일 (Yeongil Noh) : 피엠님 전화로 설명주신 내용은 버퍼 내 파레트 개수가 줄어야 해결될 것 같은데, 계획상으로는 버퍼재고 계획이 70만셀까지 반영되어 있어 지금 계획 상으로는 파레트를 뺄수 없는 상황입니다.(공간도 없음) 문제되는 현상을 메일로 공유 한번 부탁 드립니다. June 27, 2025 at 12:41 AM, 배병민 (Bae Byoungmin) : 네 알겠습니다. 메일로 정리해서 공유드리겠습니다 감사합니다 June 27, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 27, 2025 at 6:22 AM, Őri Imre : Jó reggelt! June 27, 2025 at 6:23 AM, Őri Imre : AGV 11 a Modul 1 sor végén hibába áll! Meg tudnátok nézni? Köszönöm! June 27, 2025 at 6:23 AM, FA/CS/AGV/Taimur : Checking. Will turn AGV on. Thanks June 27, 2025 at 6:39 AM, Őri Imre : Thx! June 27, 2025 at 9:12 AM, 원승연(Seungyeon Won) : @배병민 (Bae Byoungmin) @노영일 (Yeongil Noh) @정낙정(JEONG NAK JEONG) 안녕하세요 PM님 지금 버퍼창고 적재율 조금 해소되었는데 해체기 재가동해도 되는지 문의드립니다. June 27, 2025 at 9:13 AM, 배병민 (Bae Byoungmin) : 넵 아침에 확인 했는데 많이 해소되어 가능해도 문제없겠습니다 June 27, 2025 at 9:13 AM, 원승연(Seungyeon Won) : 알겠습니다 June 27, 2025 at 9:14 AM, 원승연(Seungyeon Won) : @Kiss András SSL “D” @Éváné Bori Viktória Box unpacking start June 27, 2025 at 9:32 AM, FACS_JaewonShin : 언패킹 가동했습니다 June 27, 2025 at 9:45 AM, 원승연(Seungyeon Won) : 감사합니다 June 27, 2025 at 1:33 PM, 원승연(Seungyeon Won) : Plz check AGV 12 thanks! June 27, 2025 at 1:34 PM, FA/CS/AGV/Taimur : Solving June 27, 2025 at 2:36 PM, Őri Imre : Modul 4 sor. 2 blokkban nem jött cella! 2x újra lett indítva de nem segített! Rá tudnátok nézni? Köszönöm! June 27, 2025 at 2:45 PM, Dávid F.A. : Úton van a palleta! June 27, 2025 at 2:45 PM, Őri Imre : Thx June 27, 2025 at 3:43 PM, 배병민 (Bae Byoungmin) : @[민겸]MinGyum PM님 유선상 요청드린 내용으로 셀버퍼 창고로 Empty PLT 수동투입을 1번 창고로 부탁드립니다. 2번창고로 투입시 부하가 너무 높습니다 June 27, 2025 at 3:44 PM, [민겸]MinGyum : 현장에 전달했습니다. June 27, 2025 at 3:45 PM, 배병민 (Bae Byoungmin) : 감사합니다 June 27, 2025 at 4:32 PM, 이재근(lee jae geun) : Eol 2Line empty Pallet is not coming in, please check June 27, 2025 at 4:32 PM, Mohammad Amir : Checking June 27, 2025 at 4:33 PM, Mohammad Amir : AGV#15 on the way. ✅ Thank you very much! June 27, 2025 at 4:37 PM, Mohammad Amir : Update:- Empty pallet has been delivered successfully to EOL-2. ✅ Thank you very much! June 27, 2025 at 4:51 PM, Tóth Gyula : Sziasztok, MOCNV036_M01 Megállt a cella betöltés June 27, 2025 at 4:56 PM, Dávid F.A. : It works properly! Verification done! June 27, 2025 at 5:27 PM, Mohammad Amir : @Dávid F.A. Please check M0STK014_C01 there is CRANE move timeout error. Thank you very much! June 27, 2025 at 5:29 PM, Mohammad Amir : This error has been resolved ✅. Thank you very much! June 27, 2025 at 6:27 PM, R. József C SL EOL : Kérlek gyertek boxpackingra June 27, 2025 at 6:27 PM, R. József C SL EOL : Unpacking vákuum probléma June 27, 2025 at 6:27 PM, Döme György F.A : Máris ott vagyunk June 27, 2025 at 6:50 PM, R. József C SL EOL : Eol 9 szemben agv hibával áll a buffer portnál, kérlek nézzétek meg June 27, 2025 at 6:50 PM, FA-CS-AGV-Masoud : Coming June 27, 2025 at 6:51 PM, FA-CS-AGV-Masoud : Solved June 28, 2025 at 4:03 AM June 28, 2025 at 4:03 AM, Sási Zsolt SL/C/ EOL : Gyertek kérlek. 10 sorral szemben buffer alk hibával June 28, 2025 at 4:05 AM, VK (mcs) : @FA Please check 1st cell buffer M0STK011 Crane fork right over run detect. June 28, 2025 at 4:06 AM, Döme György F.A : Checking June 28, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor June 28, 2025 at 6:07 AM, Nagy Mónika : Jó reggelt! Line1 kitöltèsnèl a nagy Agv hibával àll. Rànèznètek? Köszönöm! June 28, 2025 at 6:07 AM, FA/CS/AGV_ Asjad : Coming June 28, 2025 at 6:10 AM, FA/CS/AGV_ Asjad : Solved June 28, 2025 at 6:33 AM, Éváné Bori Viktória : Sziasztok! GF bufferbe segítséget kérünk, számítógép problémánk van! @N.Gábor F.A. @Dávid F.A. June 28, 2025 at 6:34 AM, N.Gábor F.A. : Mindjárt megyünk June 28, 2025 at 7:04 AM, 원승연(Seungyeon Won) : AGV 12 check plz thanks! June 28, 2025 at 7:05 AM, FA/CS/AGV_ Asjad : Checking June 28, 2025 at 7:05 AM, FA/CS/AGV_ Asjad : Fixed June 28, 2025 at 7:06 AM, 원승연(Seungyeon Won) : AGV 12에서 ACS 에러가 자주 발생하는데 점검 요청드릴 수 있을까요? June 28, 2025 at 7:08 AM, Duna Don : Yes, sure we will take care of that. Thank you! June 28, 2025 at 7:11 AM, FACS_Youngmin LEE : 네 점검 하겠습니다. June 28, 2025 at 7:20 AM, Őri Imre : Üdv! Van a Modulra üres papír és muanyagos kaloda fent? 20 perce kértük és még nem érkezett meg! June 28, 2025 at 7:20 AM, N.Gábor F.A. : Mindjárt meg nézzük June 28, 2025 at 7:20 AM, Őri Imre : Mert ha nincs akkor át kell térni a régi BB zsákos módszerre June 28, 2025 at 7:36 AM, N.Gábor F.A. : Nincs üres kaloda Kénytelenek vagytok a régi módszert használni June 28, 2025 at 7:52 AM, Őri Imre : Köszi June 28, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACSteam@FA 남쪽 cell 완제품 창고 크레인 알람발생하여 제품 배출이 안되고 있습니다 빠른 확인 바랍니다 June 28, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACSteam@FA The south cell warehouse crane alarm is not discharged due to the product. Please check it as soon as possible June 28, 2025 at 8:49 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK035_ C01 June 28, 2025 at 8:50 AM, Mohammad Amir : Good morning Sir, I already informed the FA team,they are checking the issue. Thank you very much! June 28, 2025 at 8:58 AM, Mohammad Amir : Sir, Update:- Issue has been resolved now ✅ Now materials on the way . I am monitoring. Thank you very much! June 28, 2025 at 8:58 AM, N.Gábor F.A. : Solved June 28, 2025 at 9:22 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS tema, FA 남측 셀 완제품 창고 1F M0STK035 M0CNV036_P13_BP01 아 June 28, 2025 at 9:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 28, 2025 at 9:24 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS tema, FA South cell product warehouse 1F M0STK035 M0CNV036_P13_BP01 An alarm has been issued. June 28, 2025 at 9:24 AM, N.Gábor F.A. : Checking June 28, 2025 at 9:27 AM, N.Gábor F.A. : Problem solved June 28, 2025 at 9:27 AM, Mohammad Amir : Thank you very much. June 28, 2025 at 9:28 AM, 원승연(Seungyeon Won) : AGV 10, 13 check please June 28, 2025 at 9:28 AM, FA/CS/AGV_ Asjad : Coming June 28, 2025 at 9:30 AM, FA/CS/AGV_ Asjad : Solved June 28, 2025 at 9:48 AM, Mohammad Amir : @FA @Dávid F.A. Please check M0STK011_M01 /P12 there is CV data Mismatch nothing error. Thank you very much! June 28, 2025 at 9:51 AM, N.Gábor F.A. : Checking June 28, 2025 at 10:00 AM, N.Gábor F.A. : Problem solved June 28, 2025 at 10:01 AM, Mohammad Amir : Thank you very much 🙏 June 28, 2025 at 11:23 AM, Éváné Bori Viktória : Sziasztok! GF bufferbe szükségünk van a segítségetekre, paletta probléma. @N.Gábor F.A. @Dávid F.A. June 28, 2025 at 11:36 AM, N.Gábor F.A. : Megyünk June 28, 2025 at 12:28 PM, Mohammad Amir : @N.Gábor F.A. Please check STK011_C01 there is CRANE sew travel X fault several jobs are pending. Thank you very much! June 28, 2025 at 12:29 PM, N.Gábor F.A. : Solved June 28, 2025 at 1:32 PM, 원승연(Seungyeon Won) : Plz check buffer warehouse #1 June 28, 2025 at 1:38 PM, 원승연(Seungyeon Won) : Fixed June 28, 2025 at 1:58 PM, 원승연(Seungyeon Won) : Buffer warehouse#1 check plz June 28, 2025 at 2:02 PM, Éváné Bori Viktória : @N.Gábor F.A. nézzétek meg kérlek!!! June 28, 2025 at 2:02 PM, N.Gábor F.A. : Mindjárt megyünk June 28, 2025 at 2:24 PM, 원승연(Seungyeon Won) : M0STK011, 13030, 13031, and 13032 are not running. Could you please check them? June 28, 2025 at 2:25 PM, N.Gábor F.A. : Sure June 28, 2025 at 2:26 PM, N.Gábor F.A. : Done Now working June 28, 2025 at 2:30 PM, Mohammad Amir : @N.Gábor F.A. Please check again STK011_C01 there is Crane_Move_Timeout. Thank you very much! June 28, 2025 at 2:39 PM, N.Gábor F.A. : Solved June 28, 2025 at 3:29 PM, Mohammad Amir : @FA @N.Gábor F.A. M0STK012_M01_OP01 ther is Home return fail error. Thank you very much! June 28, 2025 at 3:40 PM, N.Gábor F.A. : Solved June 28, 2025 at 3:40 PM, Mohammad Amir : Thank you very much! June 28, 2025 at 4:18 PM, Mohammad Amir : @N.Gábor F.A. Please check M0STK011_P06 there is STK light curtain detect error and some jobs are pending. Thank you very much! June 28, 2025 at 4:23 PM, N.Gábor F.A. : Solved June 28, 2025 at 4:23 PM, Mohammad Amir : Thank you very much 🙏 June 28, 2025 at 5:40 PM, Nagy Mónika : Line1 betöltèsnèl a nagy agv hibával àll. Rànèznètek? Köszönöm!🙂 June 28, 2025 at 5:40 PM, FA-CS-AGV-Masoud : Coming June 28, 2025 at 5:50 PM, Éváné Bori Viktória : Sziasztok! A GF bufferben a felső szalag ami áthordja a raklapokat, az 1-2- ből a 3-4 - be hibára jelez, kérlek nézzétek meg. June 28, 2025 at 6:23 PM, FACS_Youngmin LEE : solved June 28, 2025 at 6:57 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.28 2.Machine name : -Cell_buffer Brige 3. Action detail : -sensor check 4.Work time -Start : 18:57 -End : 5. Remark(specialote) : -X June 28, 2025 at 7:11 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.28 2.Machine name : -Cell_buffer Brige 3. Action detail : -sensor check 4.Work time -Start : 18:57 -End : 19:11 5. Remark(specialote) : -X June 29, 2025 at 2:58 AM June 29, 2025 at 2:58 AM, Sási Zsolt SL/C/ EOL : 15 AGV check please. June 29, 2025 at 2:58 AM, FA-CS-AGV-Masoud : Coming June 29, 2025 at 3:02 AM, FA-CS-AGV-Masoud : Solved June 29, 2025 at 6:03 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Zsurbej Zsolt Modul(2): Nagy Gábor, Martina Dávid Hun Operators (2): Gombos Csaba Nagypál Gábor June 29, 2025 at 6:00 PM, Reisz Tibor : End of line3 agv error (rear steering error) please help June 29, 2025 at 6:01 PM, FA-CS-AGV-Masoud : Coming June 29, 2025 at 6:04 PM, FA-CS-AGV-Masoud : Solved June 29, 2025 at 7:04 PM, R. József C SL EOL : 3as buffernél eolon ellenőrizzétek kérlek az agv-ket, több is hibával áll a portoknál June 29, 2025 at 7:04 PM, R. József C SL EOL : Köszönöm June 29, 2025 at 7:04 PM, FA-CS-AGV-Masoud : Coming June 29, 2025 at 7:06 PM, FA-CS-AGV-Masoud : I already mentioned the problem for these ports. FA are working on it it’s not AGV problem thanks June 29, 2025 at 7:15 PM, Balázs Róbert SL : Hello!3-4 sor között meg állt az AGV. Nézzétek meg légyszíves June 29, 2025 at 7:15 PM, FA-CS-AGV-Masoud : Coming June 29, 2025 at 7:18 PM, FA-CS-AGV-Masoud : Solved June 29, 2025 at 7:18 PM, R. József C SL EOL : Please check cellbuffer #1 June 29, 2025 at 7:22 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA please check M0STK011_P05 C/V data mismatch error June 29, 2025 at 7:29 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.29 2.Machine name : -Cell_buffer 13 3. Action detail : - light curtein PLC check 4.Work time -Start : 19:29 -End : 5. Remark(specialote) : -30분 소요예상 June 29, 2025 at 7:38 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.06.29 2.Machine name : -Cell_buffer 13 3. Action detail : - light curtein PLC check 4.Work time -Start : 19:29 -End : 19:38 5. Remark(specialote) : -조치완료 June 29, 2025 at 8:18 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA please check M0STK011_P05 C/V data mismatch error June 29, 2025 at 8:20 PM, Zoltán Harasztia FA : Solved June 30, 2025 at 12:46 AM June 30, 2025 at 12:46 AM, R. József C SL EOL : Eol 2 Agv 15 c/v work data mismatch Please check June 30, 2025 at 12:46 AM, Sarvajcz Ferenc FA : Ok June 30, 2025 at 12:46 AM, FA-CS-AGV-Masoud : Coming June 30, 2025 at 12:47 AM, FA-CS-AGV-Masoud : Solved June 30, 2025 at 6:12 AM, Sarvajcz Ferenc FA left this chatroom. June 30, 2025 at 8:44 AM, Nikolett SL/B EOL : Hello, there is an Agv in front of 9-10 rows, we need a better seat. Thanks June 30, 2025 at 8:45 AM, FA/CS/AGV_ Asjad : Checking June 30, 2025 at 8:47 AM, FA/CS/AGV_ Asjad : Done June 30, 2025 at 9:10 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team,@FA, @배병민 (Bae Byoungmin) @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) @[민겸]MinGyum 화성 포장기 plt id 바코드가 선명하지 않아 PDA사용을 못하고 있습니다. 해당내용 이전에도 말씀적이 있으며, 해당공정 프린트 빠른 확인 부탁드립니다. 해당내용 메일로 자세히 내용 드리겠습니다. June 30, 2025 at 9:11 AM, 배병민 (Bae Byoungmin) : PLT ID가 박스인가요? PLT 인가요? June 30, 2025 at 9:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 June 30, 2025 at 9:13 AM, SKOH2/제조-셀,모듈 출하/김병호 : 사이드 커버 PLT ID입니다 June 30, 2025 at 9:19 AM, FACS_JaewonShin : 출하쪽으로 가면 해당 실물 볼수있나요? June 30, 2025 at 9:58 AM, FACS_JaewonShin : 내용 확인했고 4면라벨러 점검 및 프린트 속도 조절 하였습니다 June 30, 2025 at 10:27 AM, 배병민 (Bae Byoungmin) : 속도 조절하고 프린트 바코드등등 치수, 위치 변경 확인 부탁합니다. 이전 세팅 크기, 위치와 동일한지... June 30, 2025 at 10:38 AM, FACS_JaewonShin : 2ips 4ips 10ips 설정해서 인쇄해본결과 바코드 사이즈나 전체 인쇄크기 동일 합니다. 4ips부터 열전사가 제대로 안되어서 번지는 형상이 나옵니다. 10ips설정시 완전히 흐릿하게 인쇄됩니다. 4면라벨러는 현재 2ips로 설정하여 느리게 인쇄됩니다. June 30, 2025 at 10:38 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS tema/Fa M0STK034_C01 크레인 작업시간이 얼마나 걸리실까요?? June 30, 2025 at 10:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : 11시 출하차량에 제품이 34번 뱅크에 있어서 빠른 확인 부탁드립니다. June 30, 2025 at 10:45 AM, FACS_JaewonShin : 크레인 right wire 끊어짐 알람 발생해서 원인 확인중입니다 June 30, 2025 at 12:33 PM, Mohammad Amir : @Denkó Jani (F.A.) Please check M0STK011_P12 there is CV data Mismatch error and jobs are getting delayed. Thank you very much! June 30, 2025 at 12:40 PM, Denkó Jani (F.A.) : Checking June 30, 2025 at 12:49 PM, Boromisza Zoltán : Solved June 30, 2025 at 12:49 PM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 12:54 PM, 원승연(Seungyeon Won) : Please move AGV 8 June 30, 2025 at 12:55 PM, Duna Don : Done ✅ June 30, 2025 at 2:31 PM, 배병민 (Bae Byoungmin) : 34번 창고 크레인 케이블 교체 완료되어 정상 반송중입니다. June 30, 2025 at 3:26 PM, Mohammad Amir : @FA Please check M0STK011_M01 there is Port validation NG error. Thank you very much! June 30, 2025 at 3:32 PM, 원승연(Seungyeon Won) : Please move AGV #8 thanks! June 30, 2025 at 3:33 PM, FA/CS/AGV_ Asjad : Done June 30, 2025 at 3:46 PM, Nikolett SL/B EOL : Same please June 30, 2025 at 3:47 PM, Duna Don : On it June 30, 2025 at 3:47 PM, Duna Don : Done ✅ June 30, 2025 at 3:49 PM, Nikolett SL/B EOL : Please move AGV #14 Thanks June 30, 2025 at 3:50 PM, FA/CS/AGV_ Asjad : Done June 30, 2025 at 4:38 PM, Szabolcs : @FA M0STK035_C01 crane problem. Check please. June 30, 2025 at 5:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team 납측 셀 도크장 GF M9CNV036_58_023 알람발생하여 확인 부탁드립니다 June 30, 2025 at 5:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team South cell dock GF M9CNV036_58_023 Please check the alarm. June 30, 2025 at 5:44 PM, 배병민 (Bae Byoungmin) : 저희쪽 확인중인가요? June 30, 2025 at 5:45 PM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin June 30, 2025 at 5:45 PM, SKOH2/제조-셀,모듈 출하/김병호 : This message was deleted. June 30, 2025 at 5:46 PM, FACS_오창훈_CHANGHOON : 이동중입니다 June 30, 2025 at 5:47 PM, FACS_JaewonShin : 재가동 했습니다 June 30, 2025 at 5:55 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 박스포장기 재가동하여 RTD 반송관리 Z 파레트 목표수량 0->250으로 변경하겠습니다. June 30, 2025 at 6:03 PM, 배병민 (Bae Byoungmin) : @FACS_TaehyeongJin @FACS_Hyeongi Son 야간에 박스 포장/해체기 생산량 잘나올수 있도록 잘부탁합니다. June 30, 2025 at 6:05 PM, FACS_TaehyeongJin : 알겠습니다 June 30, 2025 at 6:05 PM, 유경호(RYU KYEONGHO) : 250에서 반송 안되서 250->300으로 바꿨는데도 반송 안잡힙니다. June 30, 2025 at 6:09 PM, 정낙정(JEONG NAK JEONG) : RTD 확인해보니 지금 S파레트 반송 2개로 표시됩니다. June 30, 2025 at 6:18 PM, 배병민 (Bae Byoungmin) : @Atom Yang(MCS/RTD) 부장님 확인 부탁드립니다 June 30, 2025 at 6:22 PM, 박태영 : 이동중이실 겁니다. 확인해 볼게요 June 30, 2025 at 6:24 PM, 배병민 (Bae Byoungmin) : 감사합니다 June 30, 2025 at 6:31 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 30, 2025 at 7:40 PM, Atom Yang(MCS/RTD) : 반송 가능 152개 중 S 팔렛트 33개 반송 가능 상태로 확인됩니다. 단지, RTD에 반송 요청중인 곳은 P04(LONG)으로 확인되고 있습니다. June 30, 2025 at 8:09 PM, 박태영 : 확인 완료된건가요? June 30, 2025 at 8:11 PM, Atom Yang(MCS/RTD) : MCS/RTD 는 확인되었으나, 아직 반송되지 않고 있습니다. CIM SIDE 확인을 요청하였습니다. June 30, 2025 at 8:13 PM, FACS_TaehyeongJin : @mcs M0CNV032 P02 Pallete id S019171 There is no job plz check June 30, 2025 at 8:14 PM, 배병민 (Bae Byoungmin) : 말씀해주신데로 해체기로 Job이 한개 남아서 처리가 안되고있었습니다. 도움주셔서 감사합니다 June 30, 2025 at 8:18 PM, Shakir (MCS) : Job initiated ✅ AGV09 assigned and on the way Thank you June 30, 2025 at 10:24 PM, Magosi Erik : @Csepi Árpád Line3-4 material lift in error. Please check June 30, 2025 at 10:24 PM, Magosi Erik : Thank You June 30, 2025 at 10:43 PM, FACS_TaehyeongJin : @mcs M0CNV023 P31 Pallete id PS230-2506120022 There is no job plz check June 30, 2025 at 10:46 PM, Csepi Árpád : Solved June 30, 2025 at 10:46 PM, Shakir (MCS) : Job exits for this pallets but the destination M3MFA300_P29 is OOS, that’s why it is not moving. @FA please check Thanm yiu June 30, 2025 at 10:46 PM, Magosi Erik : Thank You Árpi June 30, 2025 at 10:48 PM, FACS_Hyeongi Son : Solved Someone changed the port to manual June 30, 2025 at 11:25 PM, Tklcz Alexandra SL/A : Please move EOL AGV15. June 30, 2025 at 11:25 PM, FA CS AGV Jawad : Sure July 1, 2025 at 12:56 AM July 1, 2025 at 12:56 AM, 김대은 : Please move EOL AGV8 July 1, 2025 at 12:56 AM, FA CS AGV Jawad : Sure July 1, 2025 at 8:11 AM, FACS_오창훈_CHANGHOON : @mcs please check MOCNV23_35_11 PS230-2506120022 July 1, 2025 at 8:24 AM, Sazzad Bhai SKon : There was an unsuccessful UR due to carrier location mismatched. July 1, 2025 at 8:28 AM, FACS_오창훈_CHANGHOON : Thank you July 1, 2025 at 8:28 AM, FACS_JaewonShin : Is it possible to move stk? July 1, 2025 at 8:29 AM, Sazzad Bhai SKon : We'll send to Raw warehouse STK 25? July 1, 2025 at 8:30 AM, FACS_JaewonShin : Okay July 1, 2025 at 8:33 AM, duzzaman Md (MCS) : Transfer initiated. July 1, 2025 at 9:39 AM, Nikolett SL/B EOL : Please move EOL AGV16 July 1, 2025 at 9:39 AM, FA/CS/AGV/Taimur : Sure July 1, 2025 at 12:07 PM, Kurkó Péter : Hello modul 4line bma port fényfüggony hibával áll valaki nézzen rá köszi July 1, 2025 at 12:08 PM, Boromisza Zoltán : Oké July 1, 2025 at 12:08 PM, 윤성제(Yoon SungJe) : M4MFA300_P29. July 1, 2025 at 12:09 PM, Nikolett SL/B EOL : Sziasztok Eol 9-10 előtt egy AGV kiállt hibára valaki jöjjön kérem Köszönöm July 1, 2025 at 12:09 PM, Denkó Jani (F.A.) : @FA/CS/AGV/Taimur please July 1, 2025 at 12:09 PM, FA/CS/AGV/Taimur : Sure July 1, 2025 at 12:19 PM, Boromisza Zoltán : Kész July 1, 2025 at 12:36 PM, Nikolett SL/B EOL : Hello Boxpacking AGV t valaki arrébb tudja küldeni #5 Köszönöm July 1, 2025 at 12:42 PM, Duna Don : Solved July 1, 2025 at 1:08 PM, 유경호(RYU KYEONGHO) : @fa please check layer separator of box unpacking machine July 1, 2025 at 1:16 PM, Boromisza Zoltán : Solved July 1, 2025 at 2:02 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 박스패킹 mes19 발생했습니다. S019042입니다 July 1, 2025 at 2:02 PM, FACS_JaewonShin : 현장으로 가겠습니다. July 1, 2025 at 2:06 PM, FACS_JaewonShin : Mes02입니다. 조립2에서 pending 된 자재라고 하는데 입구에서 빼야할거같습니다 July 1, 2025 at 2:08 PM, Nikolett SL/B EOL : Boxpacking #3 I would like to ask for help in sending July 1, 2025 at 2:30 PM, 유경호(RYU KYEONGHO) : MES4502 에러, 조립보류셀 포함 파레트구요. 포장 출고 진행 시에는 보류가 없었는데, 그 후에 보류 생성되고 박스포장기 투입부에서 에러 발생한 것입니다. IT팀과 해당 문제 통화했습니다. July 1, 2025 at 2:42 PM, 한상범(Han Sang Beom) : boxpacking Move AGV#3. Thank you. @FA July 1, 2025 at 2:42 PM, FA/CS/AGV/Taimur : Sure July 1, 2025 at 4:51 PM, 임남영(Lim Nam Young) : EOL 포드 라인 AGV가 움직이지 않습니다 확인부탁드립니다 @FA July 1, 2025 at 4:52 PM, FA/CS/AGV/Taimur : Checking July 1, 2025 at 4:55 PM, FA/CS/AGV/Taimur : @duzzaman Md (MCS) can you also ensure if there is no supply issues with EOL running lines? Thanks July 1, 2025 at 5:02 PM, duzzaman Md (MCS) : Everything is normal from MCS side. 7,8,11,12 lines are OOS. July 1, 2025 at 6:15 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 1, 2025 at 6:27 PM, FA CS AGV Jawad : @Csepi Árpád can you plz help me at End product storage. Pallet has stucked in port very badly. July 1, 2025 at 6:28 PM, FA CS AGV Jawad : This message was deleted. July 1, 2025 at 7:04 PM, SKOH2/제조-셀,모듈 출하/김병호 : FACs tema M0STK035_C01 크레인 기동 정지 상태입니다 확인부탁드립니다 July 1, 2025 at 7:05 PM, FACS_Hyeongi Son : 이동하겠습니다 July 1, 2025 at 7:12 PM, FACS_Hyeongi Son : 조치했습니다 July 1, 2025 at 8:37 PM, Tklcz Alexandra SL/A : Hi! GF buffer July 1, 2025 at 8:37 PM, Tklcz Alexandra SL/A : An alarm is sounding, someone please check. July 1, 2025 at 8:58 PM, FACS_TaehyeongJin : EOL 설비로부터 파레트 데이터가 없이 STK로 오고 있습니다 확인부탁드립니다 July 1, 2025 at 9:18 PM, FACS_Hyeongi Son : @MCS Plz check M0STK013_P02 Pallet Data : S019200 July 1, 2025 at 9:21 PM, VK (mcs) : Destination is M0STK012 but it's out of service now. July 1, 2025 at 9:22 PM, FACS_Hyeongi Son : Solved now July 1, 2025 at 9:27 PM, Tklcz Alexandra SL/A : Near EOL3 AGV13 error in buffer July 1, 2025 at 9:31 PM, FACS_Hyeongi Son : Solved July 1, 2025 at 9:31 PM, Tklcz Alexandra SL/A : This message was deleted. July 1, 2025 at 9:42 PM, FACS_Hyeongi Son : @EOL Plz check July 1, 2025 at 10:00 PM, Tklcz Alexandra SL/A : A boxpacking lifthez kérünk karbantartást. July 1, 2025 at 10:01 PM, 요셉 : EOl 5L Please check if the empty pallet is not coming. July 1, 2025 at 10:04 PM, Tklcz Alexandra SL/A : Near EOL9 AGV error in buffer. July 1, 2025 at 10:06 PM, VK (mcs) : LR received at 22:04 and S019195 assigned. July 1, 2025 at 10:12 PM, 김대은 : Near EOL9 18AGV error in buffer. July 1, 2025 at 10:14 PM, FA CS AGV Jawad : I check it July 1, 2025 at 10:16 PM, FA CS AGV Jawad : @FACS_TaehyeongJin its same data time out error at STKK July 1, 2025 at 10:16 PM, FA CS AGV Jawad : STK11 July 1, 2025 at 10:20 PM, Édl Tamás : Kész July 1, 2025 at 10:22 PM, FACS_Hyeongi Son : solved July 1, 2025 at 10:27 PM, Tklcz Alexandra SL/A : AGV12 error near EOL 9 in buffer July 1, 2025 at 10:49 PM, FA CS AGV Jawad : Data error again at STK 11..!!!! July 1, 2025 at 11:05 PM, FA CS AGV Jawad : This message was deleted. July 1, 2025 at 11:06 PM, FA CS AGV Jawad : Same error 🤦‍♂️ STK 11 July 2, 2025 at 12:14 AM July 2, 2025 at 12:14 AM, FACS_Hyeongi Son : This message was deleted. July 2, 2025 at 2:35 AM, Tklcz Alexandra SL/A : AGV13 error near EOL10 buffer July 2, 2025 at 2:35 AM, FA CS AGV Jawad : I check it July 2, 2025 at 2:43 AM, Tklcz Alexandra SL/A : Technikust kérünk a boxpackingre: top cover align alarm July 2, 2025 at 3:06 AM, Brázik János : Kész July 2, 2025 at 4:37 AM, Tklcz Alexandra SL/A : Boxpacking unpackinghez kérünk egy technikust. July 2, 2025 at 4:47 AM, FA CS AGV Jawad : Can some one plz check EOL 6, AGV has unload error bcz of equipment..! July 2, 2025 at 5:01 AM, Csepi Árpád : Ellenőrzés után automata módban működik a berendezés! July 2, 2025 at 5:53 AM, Tklcz Alexandra SL/A : Eol AGV10 error July 2, 2025 at 5:53 AM, FA/CS/AGV/Taimur : Checking July 2, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 2, 2025 at 6:16 AM, Éváné Bori Viktória : Sziasztok! Az AGV- k nem töltik a sorokat. Kérlek nézzétek meg! July 2, 2025 at 6:17 AM, FA/CS/AGV/Taimur : Hi, Every carrier coming from EOL to STK has data missmatch error, in system it doesn’t state its full or Empty. July 2, 2025 at 6:18 AM, Szijjártó Balázs : Modulon pedig nem érkeznek az üres dunnagek. July 2, 2025 at 6:19 AM, N.Gábor F.A. : Mindjárt érkezünk July 2, 2025 at 6:22 AM, Nagy Mónika : Sziasztok, Modul line 4 kitöltèsnèl a nagy agv hibával àll. Rànèznètek? Köszi July 2, 2025 at 6:29 AM, N.Gábor F.A. : Megy minden, úton minden July 2, 2025 at 7:19 AM, Szijjártó Balázs : Van valami gond a rendszerrel? Csak mert most meg itt áll a Line1 végén az agv, már rég kitöltötte a dunnage-ot ami már el is fogy, de csak áll az AGV. July 2, 2025 at 7:20 AM, FA/CS/AGV/Taimur : There was advance LR and CV was filled with pallet already. I will start the AGV back. July 2, 2025 at 7:28 AM, Éváné Bori Viktória : Helló! Eol AGV 6 move please July 2, 2025 at 7:29 AM, FA/CS/AGV/Taimur : Sure July 2, 2025 at 8:28 AM, 한상범(Han Sang Beom) : Empty Pallet is not supplied to EOL 2Line. Please confirm. @FA July 2, 2025 at 8:29 AM, Shakir (MCS) : AGV08 on the way to EOL02 Thanks July 2, 2025 at 8:35 AM, FA/CS/AGV/Taimur : @FA Every pallet coming from EOL line:06 to STK is missing the FULL state data and it is causing “Carrier_DATA_Receive_TIMEOUT” alarm. Can you please check the cause? Thankyou July 2, 2025 at 8:42 AM, N.Gábor F.A. : Sure July 2, 2025 at 9:10 AM, 한상범(Han Sang Beom) : The AGV is not taking the exhaust pallet of all EOL lines. “CV001 AGV Interface Error ”occurs when empty pallet is supplied. Please confirm. @FA July 2, 2025 at 9:11 AM, 한상범(Han Sang Beom) : EOL 모든 라인의 배출파레트를 AGV가 가져가지않고 있습니다. empty pallet 공급시에도 “CV001 AGV Interface Error” 발생 합니다. 확인부탁드립니다. @FACS_JaewonShin July 2, 2025 at 9:11 AM, FACS_JaewonShin : 현장으로 가겠습니다 July 2, 2025 at 9:15 AM, Duna Don : @Shakir (MCS) could you please check it? There are no jobs that I can see on ACS. Thank you! July 2, 2025 at 9:15 AM, Shakir (MCS) : Checking July 2, 2025 at 9:17 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team, FA M0STK034 크레인 기동 정지상태입니다. 현재 출하중이라 빠른 확인 부탁드립니다 July 2, 2025 at 9:18 AM, SKOH2/제조-셀,모듈 출하/김병호 : FACS team, FA M0STK034 It's crane stop. Please check July 2, 2025 at 9:21 AM, 배병민 (Bae Byoungmin) : 지금 1번 3번창고간 브릿지에 물류가 막혀있어 그렇습니다 확인 바로하고 해결해드리겠습니다 July 2, 2025 at 9:22 AM, Éváné Bori Viktória : Sziasztok! Biztonsági bejárás miatt, minimális lehet a targonca használat. A sorokra nem érkeznek meg a paletták!!! Nézzétek meg kérlek!.. @N.Gábor F.A. @Dávid F.A. July 2, 2025 at 9:23 AM, 배병민 (Bae Byoungmin) : @FA Technion please solve warehouse number 34. July 2, 2025 at 9:24 AM, Éváné Bori Viktória : 3 sor hamarosan leáll!!! July 2, 2025 at 9:25 AM, N.Gábor F.A. : @Éváné Bori Viktória @Kiss András SSL “D” Legyen kedves valaki idefárdni a Modul 34 es raktárhoz July 2, 2025 at 9:25 AM, N.Gábor F.A. : Köszönöm July 2, 2025 at 9:27 AM, Shakir (MCS) : There is issue with ACS side AGV reply not coming or not responding for all EOL line , we are investigating further. Thanks July 2, 2025 at 10:05 AM, 한상범(Han Sang Beom) : 3,4라인 공파레트 부족으로 라인 멈췄습니다. 1,2,5,6라인도 곧 멈출것 같습니다 조치 오래 걸리실까요? July 2, 2025 at 10:27 AM, Shakir (MCS) : AGV16 on the way to EOL line1 July 2, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK035 M0CNV036_P13_BP01 포트 알람으로 제품이 멈추어 있습니다 확인부탁드립니다 July 2, 2025 at 10:30 AM, 한상범(Han Sang Beom) : This pallet was moved to Line 4, and an AGV interface error occurred. July 2, 2025 at 10:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK035 M0CNV036_P13_BP01 The product is stopped by the port alarm. Please check July 2, 2025 at 10:36 AM, FACS_Wooseok Choi : 조치완료 했습니다. July 2, 2025 at 10:40 AM, 채효석(Hyoseok CHAE) : 10LINE AGV ERROR July 2, 2025 at 10:40 AM, FA/CS/AGV/Taimur : Checking July 2, 2025 at 10:52 AM, Czébely Dániel SL—D : Sziasztok a Box packing LvL1 - es pántolója. Állandóan eldobja a pontot és élvezd letekerni amagától az egész tekercset gyertek kérlek csináljátok meg. July 2, 2025 at 10:52 AM, Czébely Dániel SL—D : @N.Gábor F.A. July 2, 2025 at 10:59 AM, N.Gábor F.A. : Megyünk megnézzük July 2, 2025 at 11:32 AM, 채효석(Hyoseok CHAE) : "Lines 9 and 10 are not loading empty pallets into the AGV." July 2, 2025 at 11:40 AM, Duna Don : Line 9 AGV#17 on the way. Thank you July 2, 2025 at 12:05 PM, FA/CS/AGV/Taimur : @FA can you please check it again July 2, 2025 at 12:20 PM, Szijjártó Balázs : Megint nem ért időben a Line 1-re az üres dunnage. Megállt a sor.Raktárból hibajelzés hallatszódik. July 2, 2025 at 12:20 PM, N.Gábor F.A. : Meg nézzük July 2, 2025 at 12:30 PM, 윤성제(Yoon SungJe) : @MCS U031692는 왜 QUEUED상태인지 알 수 있을까요? July 2, 2025 at 12:32 PM, 윤성제(Yoon SungJe) : It has been changed to transfer now. I will monitor it. July 2, 2025 at 12:44 PM, FA/CS/AGV/Taimur : @Shakir (MCS) can you delete the job for carrier: T704682 and send it back tk STK13 this is advanced LR and line is not running. Thanks July 2, 2025 at 12:44 PM, Shakir (MCS) : Working on it July 2, 2025 at 12:45 PM, FA/CS/AGV/Taimur : Its fine leave it please July 2, 2025 at 12:45 PM, Shakir (MCS) : Okay, ✅ July 2, 2025 at 12:53 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) 안령하세요. box packing이 아래 문제로 미가동 중입니다. 확인 부탁드리겠습니다. @유경호(RYU KYEONGHO) The packaging machine has stopped, the servo motors have stopped and according to the F.A. a PLC technician is needed to fix the problem. The machine has been stopped since 11:45 July 2, 2025 at 12:55 PM, 유경호(RYU KYEONGHO) : 이번 주 출하 수량 맞추려면 오늘,내일 하루에 200파레트 정도 진행해야 하는데, 오늘 06시부터 30파레트 진행한 상태입니다. July 2, 2025 at 1:00 PM, 배병민 (Bae Byoungmin) : 네 확인중에 있습니다 세이프티로 전원 다 떨어진상황입니다 July 2, 2025 at 1:03 PM, 배병민 (Bae Byoungmin) : 정상 가동 시작되었습니다 July 2, 2025 at 1:05 PM, 유경호(RYU KYEONGHO) : 네 감사합니다! July 2, 2025 at 1:07 PM, 배병민 (Bae Byoungmin) : @유경호(RYU KYEONGHO) 박스 포장기 배출 보고에서 MES 4588 발생으로 배출안되고 있습니다 July 2, 2025 at 1:09 PM, Szabolcs : @FA M0CNV036_P13_BP01 1F problem. Check please. July 2, 2025 at 1:10 PM, FA/CS/AGV/Taimur : This message was deleted. July 2, 2025 at 1:14 PM, FACS_Wooseok Choi : solved July 2, 2025 at 1:16 PM, 준용 : 박스포장기 mount 보고 누락되고 end 보고올라와 상태값에러 발생하엿습니다. July 2, 2025 at 1:19 PM, 배병민 (Bae Byoungmin) : 네 박스 포장기 전체 전원 떨어지는 시점에서 보고가 된것같습니다. 이부분은 설비 보고 시점에서 이슈발생시 재보고등등 검토 개선 하겠습니다. @유경호(RYU KYEONGHO) 우선 해당 팔레트 수동으로 배출하고 재투입 부탁드립니다 July 2, 2025 at 1:24 PM, 유경호(RYU KYEONGHO) : @Czébely Dániel SL—D Z102512,Z102502 : please make 1layer and remove the side&top cover. July 2, 2025 at 1:30 PM, 배병민 (Bae Byoungmin) : @유경호(RYU KYEONGHO) 박스포장기 오퍼레이터 대응 부탁합니다. 간지 없어서 설비 계속 서있습니다 July 2, 2025 at 2:06 PM, Czébely Dániel SL—D : What else can be done with these 2 packages? July 2, 2025 at 2:12 PM, 유경호(RYU KYEONGHO) : initialization and put back to the box packing. July 2, 2025 at 2:59 PM, Éváné Bori Viktória : Helló! EOL AGV 12 in MOSTK011-STK-OP2 error please check July 2, 2025 at 3:00 PM, Duna Don : Checking July 2, 2025 at 3:00 PM, FA/CS/AGV/Taimur : Checking July 2, 2025 at 4:41 PM, Sazzad Bhai SKon invited MCS/RTD System. July 2, 2025 at 5:50 PM, Mohammad Amir : @FA Please check M0STK011_P06 there is carrier _Data received timeout error several jobs are pending. Check it on priority. Thank you very much! July 2, 2025 at 6:16 PM, Mohammad Amir : Good Evening @FA, Please check M0STK014 there is firesensor abnormal state and STK013 there is PLC_Write Fail error. Thank you very much! July 2, 2025 at 6:40 PM, Mohammad Amir : Good evening, @FA @manufacturing @CIM Please don't hesitate to call this number @MCS/RTD System in case there is urgent request related to MCS RTD. Any day anytime (24/7). Thank you very much! July 2, 2025 at 6:43 PM, Mohammad Amir : @FA Please confirm is there any one working on STK011 ,it is OOS and several jobs are pending. Thank you very much! July 2, 2025 at 6:53 PM, FA CS AGV Jawad : Yes team is working on it. July 2, 2025 at 6:56 PM, Mohammad Amir : Good evening, Thank you very much for your kind confirmation. July 2, 2025 at 7:08 PM, 요셉 : EOL 3L Please check if the empty palette is not coming in July 2, 2025 at 7:09 PM, Mohammad Amir : Good evening, Please press LR , currently no active LR exists. Last job was completed at 18:34. Thank you very much! July 2, 2025 at 7:18 PM, Mohammad Amir : Update :- LR received successfully at 19:12 and empty pallet T703618 on the way to EOL-3 ✅. Thank you very much! July 2, 2025 at 7:31 PM, Döme György F.A : @Mohammad Amir Could you please help me? The pallet (Z102687) is no longer at port M0STK011_P13_BP01 because we removed it manually. Could you please update it? July 2, 2025 at 7:32 PM, Mohammad Amir : Good evening, Checking! July 2, 2025 at 7:35 PM, Mohammad Amir : Data has been successfully updated in MCS and RTD database ✅. Thank you very much! July 2, 2025 at 7:36 PM, Döme György F.A : Köszönöm szépen! July 2, 2025 at 7:37 PM, Mohammad Amir : Szívesen! July 2, 2025 at 8:01 PM, R. József C SL EOL : Buffer 1 please check (IN) port wait 1 pallet and 1 pallet wait in agv July 2, 2025 at 8:02 PM, FA CS AGV Jawad : Work in progress July 2, 2025 at 8:15 PM, R. József C SL EOL : Please come to boxpacking in cv Agv#3 work data mismatch alarm July 2, 2025 at 8:16 PM, FA CS AGV Jawad : On my way July 2, 2025 at 8:19 PM, FA CS AGV Jawad : Solved July 2, 2025 at 8:31 PM, Mohammad Amir : @FA Please check M0STK011_P06 it is again OOS and some jobs are pending. Thank you very much! July 2, 2025 at 8:33 PM, FACS_Hyeongi Son : Working normally July 2, 2025 at 8:34 PM, Mohammad Amir : Thank you very much! July 2, 2025 at 8:44 PM, R. József C SL EOL : Please check buffer, line 1 not coming emty T pallet July 2, 2025 at 8:45 PM, Mohammad Amir : Sure, Checking July 2, 2025 at 8:45 PM, R. József C SL EOL : Now 1 pallet manual released and put in the machine July 2, 2025 at 8:46 PM, Mohammad Amir : Pallet T703639 on the way to EOL-1 on AGV#17 .✅ Thank you very much! July 2, 2025 at 8:50 PM, R. József C SL EOL : And please check line 3 July 2, 2025 at 8:50 PM, Mohammad Amir : Sure Checking July 2, 2025 at 8:51 PM, Mohammad Amir : For EOL-3, Empty pallet T701221 on the way ✅. Thank you very much! July 2, 2025 at 8:54 PM, R. József C SL EOL : Please check the agv#17#15 They are close and alarming. July 2, 2025 at 8:54 PM, FA CS AGV Jawad : I check it July 2, 2025 at 8:56 PM, R. József C SL EOL : Thank you Guys! 🙏 July 2, 2025 at 8:56 PM, FA CS AGV Jawad : Done July 2, 2025 at 8:57 PM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any further assistance. July 2, 2025 at 9:03 PM, R. József C SL EOL : It's okay.👌 July 2, 2025 at 9:22 PM, FACS_TaehyeongJin : @mcs M0STK013 P04 Pallete id S002037 Make a job plz July 2, 2025 at 9:23 PM, Mohammad Amir : Sure, Checking! July 2, 2025 at 9:29 PM, Mohammad Amir : Sir, There is already an automatic job exists for S002037 to store it inside STK014. From MCS RTD side everything is good ✅. There is no issue found,Currently job is in Queued state so it is Waiting to be picked from STK013 cranes. Could you please make sure that everything is okay from the SCS side as well(For example plate position etc). Thank you very much! July 2, 2025 at 9:29 PM, FACS_TaehyeongJin : Solved July 2, 2025 at 9:30 PM, Mohammad Amir : Yes Sir, Now carrier has been picked from Crane C02 _STK013 and carrier on its way to be deposited in STK014 . I am monitoring. Thank you very much! July 2, 2025 at 9:42 PM, FACS_Hyeongi Son : Hello M0STK013_0200902 Carrier ID : T703480 Can you check this? July 2, 2025 at 9:42 PM, Mohammad Amir : Sure, Checking! July 2, 2025 at 9:43 PM, Mohammad Amir : Sir, Currently this carrier has no job. Thank you very much! July 2, 2025 at 9:44 PM, FACS_Hyeongi Son : Thank for your checking! July 2, 2025 at 9:44 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you need any further information. July 2, 2025 at 9:59 PM, Mohammad Amir : @Zoltán Harasztia FA Please check STK013_C01 there crane_plc_interface error. Thank you very much! July 2, 2025 at 10:00 PM, Zoltán Harasztia FA : Cheking July 2, 2025 at 10:04 PM, Zoltán Harasztia FA : Solved July 2, 2025 at 10:21 PM, 요셉 : EOL agv#6 check plz July 2, 2025 at 10:24 PM, R. József C SL EOL : Acs alibe alarm July 2, 2025 at 10:24 PM, R. József C SL EOL : Alive July 2, 2025 at 10:26 PM, R. József C SL EOL : Please check again July 2, 2025 at 11:23 PM, FA CS AGV Jawad : @Mohammad Amir bhae can you plz send this pallet back to its source ID - U030021 July 2, 2025 at 11:23 PM, Mohammad Amir : Sure , Checking! July 2, 2025 at 11:23 PM, FA CS AGV Jawad : Thank you July 2, 2025 at 11:25 PM, Mohammad Amir : Job has been created successfully to travefer the carrier back to source warehouse ✅. I am monitoring for smooth delivery. Thank you very much! July 2, 2025 at 11:26 PM, R. József C SL EOL : Please check the buffer, again not coming pallets July 2, 2025 at 11:26 PM, Mohammad Amir : Please tell me for which line you are facing issues ? Thank you! July 2, 2025 at 11:35 PM, R. József C SL EOL : 1,3,4,5,6 Just Ford lines July 2, 2025 at 11:36 PM, 최준영(JoonYoung Choi) : Since the AGV's workload is large, EOL5 and 6 lines will manually input empty pallets. July 2, 2025 at 11:38 PM, Mohammad Amir : For EOL-1 , AGV just delivered the empty pallet. For EOL-3, AGV#18 on the way ✅. Checking 4,5,6. Thank you! July 2, 2025 at 11:40 PM, Mohammad Amir : For EOL-4, Last pallet arrived at 11:28 pm and afterwards we don't have LR. For EOL-5, Last pallet arrived at 22:45 and afterwards there is no LR. For EOL-6, Last pallet delivered at 11:22 PM and afterwards there is no LR. If you would like to receive pallet , please press LR. Thank you very much! July 2, 2025 at 11:42 PM, FACS_Hyeongi Son : @MCS Can you check this? M0STK014_P04(15010) Pallet ID : S002059 July 2, 2025 at 11:42 PM, Mohammad Amir : Sure, Checking! July 2, 2025 at 11:44 PM, Mohammad Amir : Issue has been resolved from MCS and RTD side ✅. Please make P04 in service and afterwards carrier will start to move. Thank you very much! July 3, 2025 at 12:00 AM July 3, 2025 at 12:00 AM, Mohammad Amir : Update :- S002059 has started to move to store in STK014. ✅ I am monitoring. Thank you very much! July 3, 2025 at 12:01 AM, Mohammad Amir : @FACS_Hyeongi Son For your information. Thank you very much! July 3, 2025 at 12:22 AM, FACS_Hyeongi Son : Thank you very much! July 3, 2025 at 12:22 AM, Mohammad Amir : You are most welcome! July 3, 2025 at 12:29 AM, Fodor István SL/C : Sziasztok Eol4 bemeneti szakaszan Agv pirosan villog. Gyertek ltsz Thx July 3, 2025 at 12:38 AM, R. József C SL EOL : Eol 8-9 között útban van a 15-ös agv, kérlek küldjétek el, köszönöm July 3, 2025 at 12:40 AM, FA CS AGV Jawad : I do July 3, 2025 at 12:40 AM, R. József C SL EOL : Thanks July 3, 2025 at 1:10 AM, R. József C SL EOL : Agv 10 check please July 3, 2025 at 1:51 AM, FACS_Hyeongi Son : @MCS Hello Can you check this? M0STK011_P05(13005) Pallet ID : S002113 July 3, 2025 at 1:51 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 1:52 AM, FACS_Hyeongi Son : Now moving Thank you for your help! July 3, 2025 at 1:53 AM, Mohammad Amir : AGV#16 is bringing to Line -5 now ✅. Thank you very much! July 3, 2025 at 1:53 AM, Mohammad Amir : You are welcome! July 3, 2025 at 1:55 AM, FACS_Hyeongi Son : One more check plz Same location Pallet ID : S002114 July 3, 2025 at 1:55 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 1:56 AM, Mohammad Amir : Now, AGV#6 on the way to pick empty pallet ✅ Thank you very much! July 3, 2025 at 1:57 AM, FACS_Hyeongi Son : Thank you for your help! July 3, 2025 at 1:57 AM, Mohammad Amir : Update : Empty pallet S002113 has successfully arrived to EOL-5 ✅ Thank you very much! July 3, 2025 at 1:57 AM, Mohammad Amir : You are most welcome. July 3, 2025 at 2:02 AM, Mohammad Amir : Update : Empty pallet S002114 has successfully arrived at EOL-6 ✅ Thank you very much! July 3, 2025 at 2:03 AM, FACS_Hyeongi Son : Thank you:) July 3, 2025 at 2:03 AM, Mohammad Amir : Feel free to contact me again if need any further assistance :) Thank you very much! July 3, 2025 at 2:07 AM, FACS_Hyeongi Son : Can you check this? M0STK013_P01(15021) Pallet ID : S002120 July 3, 2025 at 2:08 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 2:08 AM, Mohammad Amir : Now, AGV#16 on the way to pick empty pallet ✅ Thank you very much! July 3, 2025 at 2:09 AM, FACS_Hyeongi Son : Thank you for your information! July 3, 2025 at 2:10 AM, Mohammad Amir : You are welcome! July 3, 2025 at 2:11 AM, Mohammad Amir : @FACS_Hyeongi Son July 3, 2025 at 2:16 AM, R. József C SL EOL : Sziasztok, boxpackingon folyamatosan szakad a pántoló, kérlek nézzétek meg July 3, 2025 at 2:16 AM, R. József C SL EOL : Köszönöm July 3, 2025 at 3:26 AM, FACS_Hyeongi Son : @Mohammad Amir Hello Can you check this? M0STK012 Carrier ID : Z102654 Carrier ID : S002082 Carrier ID : Z102792 July 3, 2025 at 3:26 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 3:34 AM, FACS_Hyeongi Son : Solved now! Thank you:) July 3, 2025 at 3:36 AM, Mohammad Amir : Hello, All these carriers are currently stored in STK 012 . issue has been resolved ✅. Now carrier S002082 has started to move. Soon Remaining two carriers will also move. Thank you very much! July 3, 2025 at 3:36 AM, FACS_Hyeongi Son : Thank you for your infomation! July 3, 2025 at 3:37 AM, Mohammad Amir : I have resolved the issue for remaining two carriers Z102654/102792. ✅ Now these carriers have started to move as well. Thank you very much! July 3, 2025 at 3:41 AM, Mohammad Amir : Summary of the issue :- There was an issue which was blocking the bridge between STK012 and STK014 and it was the route(STK012->M0VNV022->STK014->STK013) for all these three carriers as all these carriers final destination was STK013. After solving the bridge issue all jobs have been normalized ✅. Thank you very much! July 3, 2025 at 3:42 AM, FACS_Hyeongi Son : Thank you for letting me know! July 3, 2025 at 3:43 AM, Mohammad Amir : You are welcome! I am glad to assist you :) July 3, 2025 at 4:23 AM, FA CS AGV Jawad : @Mohammad Amir bhae, pallet S002121, crane is taking it for some time..can you check July 3, 2025 at 4:23 AM, FA CS AGV Jawad : Not taking July 3, 2025 at 4:24 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 4:24 AM, FA CS AGV Jawad : It has been taken...Thanks bhae July 3, 2025 at 4:25 AM, Mohammad Amir : Issue has been resolved ✅. Crane and picked the item. Thank you very much! July 3, 2025 at 4:25 AM, Mohammad Amir : You are most welcome! July 3, 2025 at 4:26 AM, Mohammad Amir : Crane has** July 3, 2025 at 4:35 AM, R. József C SL EOL : Please check the agv#18 July 3, 2025 at 4:35 AM, FA CS AGV Jawad : I do July 3, 2025 at 4:51 AM, Mohammad Amir : @FA Please check STK011_P06 it's OOS. Thank you very much! July 3, 2025 at 4:51 AM, FACS_Hyeongi Son : Working July 3, 2025 at 4:52 AM, Mohammad Amir : Thank you very much! July 3, 2025 at 4:53 AM, FACS_Hyeongi Son : You’re welcome! July 3, 2025 at 5:05 AM, 요셉 : Please move the agv in front of EOL 3L to the side. Thank u July 3, 2025 at 5:05 AM, FA CS AGV Jawad : Sure July 3, 2025 at 5:31 AM, R. József C SL EOL : Please check the buffer Eol 9 line not coming empty pallet July 3, 2025 at 5:31 AM, Mohammad Amir : Sure Checking! July 3, 2025 at 5:32 AM, Mohammad Amir : Now Empty pallet Z102671 on the way to EOL-9 ✅. I am monitoring. Thank you very much! July 3, 2025 at 5:43 AM, Mohammad Amir : AGV#18 has been assigned ✅. Thank you very much! July 3, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(4) Oláh András , Kiss Balázs, Szabadi Miklós, Novák Károly Assembly(4): GF: Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 3, 2025 at 10:50 AM, Nagy Mónika : Sziasztok, line1-3-4 re nem jönnek a nagy AGV-k. üres dangue- t sem hoz. Rànèznètek kérlek? Köszi! July 3, 2025 at 10:50 AM, N.Gábor F.A. : Raktár hiba volt Most orvosoltuk Úton az anyag July 3, 2025 at 10:50 AM, Nagy Mónika : Köszi July 3, 2025 at 11:38 AM, Éváné Bori Viktória : Helló AGV17 move please July 3, 2025 at 11:39 AM, FA/CS/AGV_ Asjad : Done July 3, 2025 at 11:54 AM, Éváné Bori Viktória : Szia! Át kellene írni a bufferben a számot! @N.Gábor F.A. July 3, 2025 at 11:58 AM, 배병민 (Bae Byoungmin) : @Sazzad Bhai SKon Please delete all jobs that are scheduled to be EOL Empty. July 3, 2025 at 11:59 AM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @[민겸]MinGyum EOL 라인 공팔레트 투입 LR에 문제가 생겨 우선 수동 투입 부탁드리겠습니다. 조치되면 공유드리겠습니다. July 3, 2025 at 12:01 PM, Sazzad Bhai SKon : MCS RTD jobs are ok. The problem is between AGV and port. We have several errors July 3, 2025 at 12:02 PM, Sazzad Bhai SKon : The job can be deleted, but it Will be created again, as long as LR is active from EOL lines. July 3, 2025 at 1:51 PM, Delosa Viki (데로사) left this chatroom. July 3, 2025 at 2:09 PM, 채효석(Hyoseok CHAE) : 10LINE AGV NG July 3, 2025 at 2:12 PM, FA/CS/AGV_ Asjad : @MCS/RTD System Can you please create transfer job for EOL 10 (Pallet ID: Z102689) Thank you! July 3, 2025 at 2:19 PM, Sazzad Bhai SKon : Is this currently on port 2? EOL 10 line July 3, 2025 at 2:20 PM, FA/CS/AGV_ Asjad : Yes, FACPM010_P02 July 3, 2025 at 2:22 PM, 배병민 (Bae Byoungmin) : We will stop the AGV for a moment to reboot the ACS system. July 3, 2025 at 2:32 PM, Sazzad Bhai SKon : After reboot working well. Thank you July 3, 2025 at 2:41 PM, 배병민 (Bae Byoungmin) : EOL 전체 정상 자동 반송 가능하겠습니다. 수동 투입 멈춰주시면 자동으로 전체 변경하겠습니다. ACS 메모리 부하로인한 문제로 추정되며 ACS 전체 시스템 일괄 초기화 이후 정상화 되었습니다. 생산에 차질을 드려 죄송합니다. July 3, 2025 at 5:50 PM, Éváné Bori Viktória : Helló! AGV 17 ACS alive alarm, please check July 3, 2025 at 6:47 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA pleas check M0STK001_P05 Fork right over run detect July 3, 2025 at 6:47 PM, R. József C SL EOL : Please check the buffer 1 July 3, 2025 at 6:48 PM, Zoltán Harasztia FA : Cheking July 3, 2025 at 6:54 PM, Herceg Sándor SSL/C : Hello! Please move AGV number 15 from the EAO-L corridor, as we need to take out a pallet. Thank you! July 3, 2025 at 6:54 PM, FA-CS-AGV-Masoud : Sure July 3, 2025 at 7:04 PM, 원승연(Seungyeon Won) : Buffer warehouse #1 check plz July 3, 2025 at 7:04 PM, 원승연(Seungyeon Won) : Plz move AGV 13 thanks! July 3, 2025 at 7:04 PM, FA-CS-AGV-Masoud : Sure July 3, 2025 at 7:11 PM, FACS_Hyeongi Son : 조치 완료했습니다 July 3, 2025 at 8:46 PM, FA-CS-AGV-Masoud : @VK (mcs) could you please cancel the job for AGV 14 in cell buffer 10 tray id is : Z102564 Pallet removed manually Thanks July 3, 2025 at 8:54 PM, 원승연(Seungyeon Won) : AGV 12 check plz July 3, 2025 at 8:56 PM, FA-CS-AGV-Masoud : Solved July 3, 2025 at 8:56 PM, VK (mcs) : Please cancel it from ACS side first, thx July 3, 2025 at 8:56 PM, FA-CS-AGV-Masoud : Sure July 3, 2025 at 8:57 PM, FA-CS-AGV-Masoud : Done July 3, 2025 at 8:57 PM, VK (mcs) : Job has been canceled. July 3, 2025 at 10:43 PM, 이재근(lee jae geun) : plz check AGV18 near5line July 3, 2025 at 10:43 PM, FA-CS-AGV-Masoud : Coming July 3, 2025 at 10:44 PM, FA-CS-AGV-Masoud : Solved July 3, 2025 at 11:33 PM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 Crane move timeout error July 3, 2025 at 11:34 PM, FACS_Hyeongi Son : Solved July 4, 2025 at 1:03 AM July 4, 2025 at 1:03 AM, 원승연(Seungyeon Won) : Plz check AGV 12 July 4, 2025 at 1:04 AM, FA-CS-AGV-Masoud : Solved July 4, 2025 at 1:06 AM, FA-CS-AGV-Masoud : @Zoltán Harasztia FA Please check M0STK011_P06 C/V data mismatch error July 4, 2025 at 1:06 AM, Zoltán Harasztia FA : Cheking July 4, 2025 at 3:15 AM, R. József C SL EOL : Eol 9-10 között útban van a 6-os agv Kérlek küldjétek el July 4, 2025 at 3:19 AM, FA-CS-AGV-Masoud : Coming July 4, 2025 at 3:20 AM, Balázs Róbert SL : 3as soron BMA portnál nem viszi az anyagot az agv. Nézzétek meg légyszíves July 4, 2025 at 3:20 AM, R. József C SL EOL : Thanks July 4, 2025 at 3:21 AM, Döme György F.A : Megyek July 4, 2025 at 3:54 AM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget 1. Pántoló égeti a szalagot Kérlek nézzétek meg July 4, 2025 at 3:55 AM, Zoltán Harasztia FA : Nézzük July 4, 2025 at 4:11 AM, Zoltán Harasztia FA : Kész July 4, 2025 at 4:14 AM, R. József C SL EOL : Köszönöm July 4, 2025 at 4:21 AM, Herceg Sándor SSL/C : Sziasztok! Gyertek kérlek boxpackingre July 4, 2025 at 4:25 AM, Zoltán Harasztia FA : Megyünk July 4, 2025 at 4:25 AM, Zoltán Harasztia FA : Megyünk July 4, 2025 at 4:26 AM, Herceg Sándor SSL/C : Sztornó July 4, 2025 at 4:26 AM, Herceg Sándor SSL/C : Voltak itt a kulsos csapatból July 4, 2025 at 4:26 AM, Herceg Sándor SSL/C : Koszi@ July 4, 2025 at 4:26 AM, Zoltán Harasztia FA : Oksa July 4, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.04. 10+2/12+2 Tech, 1Sl, 1Sup. Overtime(1): Szabadi Miklós Holiday(2): Gerbovits Kevin, Böröcz Tamás Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János July 4, 2025 at 8:56 AM, FACS_JaewonShin : M0STK014 fire sensor alarm check Time : 08:30 - 08:55 Location : M0STK014 6floor * fire sensor 2ea need July 4, 2025 at 9:06 AM, FACS_JaewonShin : [Stk stop] Location : M0STK013 Time : 9:10 - Cause : bridge cv stop sensor check July 4, 2025 at 9:23 AM, FACS_JaewonShin : [Stk stop] Location : M0STK013 Time : 9:10 - 9:22 Cause : bridge cv stop sensor check *modify to the end of stopper July 4, 2025 at 10:04 AM, Mohammad Amir : @FA @Boromisza Zoltán Please check STK011_C01 there is CRANE FORK right over run detect error and several jobs are getting delayed. Thank you very much! July 4, 2025 at 10:40 AM, 한상범(Han Sang Beom) : EOL 모든 AGV Fire Alarm 발생중입니다. 확인부탁드립니다. @FA @배병민 (Bae Byoungmin) July 4, 2025 at 10:47 AM, Mohammad Amir : @FA Is there still maintainance going on STK011? It is still in OOS condition. Thank you very much! July 4, 2025 at 10:50 AM, 배병민 (Bae Byoungmin) : 네 셀버퍼창고 화재 알람신호를 받고 AGV가 전체 화재 알람 뛰운것입니다. 실 화재는 아니며 화재신호 오류부분은 유틸쪽 확인 해보겠습니다. AGV는 전체 정상화 되었습니다 July 4, 2025 at 3:09 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) @[민겸]MinGyum 화성 Cell buffer 창고 현재 적재율이 전체 Max로 되어지기 직전으로 입고에 지연이 발생될수있어 창고내 공팔레트 여유가 되시면 박스 해체기 가동 조율이 필요할 듯합니다. ※ 창고 적재율 Cell buffer#1 : 97.56% Cell buffer#2 : 98.41% Cell buffer#3 : 99.26% Cell buffer#4 : 97.76% July 4, 2025 at 3:23 PM, 유경호(RYU KYEONGHO) : @배병민 (Bae Byoungmin) @[민겸]MinGyum 버퍼창고 S: 80ea, Z:165ea 완제품창고 S: 0ea, Z: 135ea RTD Z 반송수량 일시 변경했습니다. S:300 R:300 Z:250->100 July 4, 2025 at 6:15 PM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M0STK011_P05 C/V data mismatch July 4, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 4, 2025 at 8:30 PM, 원승연(Seungyeon Won) : This message was deleted. July 4, 2025 at 8:30 PM, 원승연(Seungyeon Won) : An unload command was given for UNKDUP-Z102634 at location M0STK013 0101709, but there has been no response. Please check. July 4, 2025 at 10:08 PM, FA-CS-AGV-Masoud : @Csepi Árpád Please check M0STK011_P05 Carrier data receive time out July 4, 2025 at 10:16 PM, 원승연(Seungyeon Won) : Is there anyone who can check this pallet? July 4, 2025 at 10:20 PM, VK (mcs) : Carrier does not exists in MCS. July 4, 2025 at 10:26 PM, VK (mcs) : Is it UNKDUP-Z102634-20250702170958259 ? July 4, 2025 at 10:45 PM, 원승연(Seungyeon Won) : Yes July 4, 2025 at 10:46 PM, 원승연(Seungyeon Won) : The buffer warehouse has been idle for too long, and the equipment is about to stop. We will switch to manual mode. Please move the AGVs from lines 9 and 10. July 4, 2025 at 10:46 PM, VK (mcs) : Where would you want me to transfer it? July 4, 2025 at 10:46 PM, FA-CS-AGV-Masoud : Sure July 4, 2025 at 10:49 PM, 원승연(Seungyeon Won) : I want to unload this pallet to M01 and check it, but the command isn’t working, so I’m unable to proceed with the verification. July 4, 2025 at 10:50 PM, VK (mcs) : Sure, l will try to release it. Just a moment. July 4, 2025 at 10:50 PM, 원승연(Seungyeon Won) : This message was deleted. July 4, 2025 at 10:55 PM, VK (mcs) : This message was deleted. July 4, 2025 at 10:55 PM, VK (mcs) : I tried to create a transfer command but it was alternated. Due to mismatch cassette size error. @FA Please check carrier UNKDUP-Z102634-20250702170958259 Located on M0STK013 (0101709). July 4, 2025 at 10:57 PM, 원승연(Seungyeon Won) : Then I’ll check it again on Monday. Thank you! July 4, 2025 at 11:00 PM, 배병민 (Bae Byoungmin) : @원승연(Seungyeon Won) July 4, 2025 at 11:01 PM, 원승연(Seungyeon Won) : 안녕하세요 PM님 S팔레트 잔량만 해체기로 가동하고 적재율 해소하겠습니다 July 4, 2025 at 11:02 PM, 원승연(Seungyeon Won) : 현재 버퍼창고 1에 에러 발생하여 모두 메뉴얼 전환하여 진행 중입니다 July 4, 2025 at 11:03 PM, 배병민 (Bae Byoungmin) : 네 감사합니다. July 5, 2025 at 1:59 AM July 5, 2025 at 1:59 AM, FACS_Youngmin LEE : 셀버퍼 창고 꽉 찬 상태로 계속 파레트 들어오던 상황의 여파로 데이터 꼬임 현상과 다수의 에러가 동시다발적으로 일어나 조치중입니다. 시간이 많이 소요 될 것 같습니다. July 5, 2025 at 2:23 AM, 이재근(lee jae geun) : Please move AGV8 July 5, 2025 at 2:24 AM, FA-CS-AGV-Masoud : Sure July 5, 2025 at 2:38 AM, 원승연(Seungyeon Won) : Plz move AGV 14 July 5, 2025 at 2:39 AM, 원승연(Seungyeon Won) : And all Change Manual plz July 5, 2025 at 2:41 AM, FA-CS-AGV-Masoud : All the AGV in EOl is already in manual mode , i will send it to the another node to open the line, Thanks for patience July 5, 2025 at 2:43 AM, 원승연(Seungyeon Won) : @배병민 (Bae Byoungmin) 해당 에러 18:23부터 발생 후에 아직도 정상 가동이 안되고 있는데 확인 가능할까요? 라인 생산에 문제 발생 중입니다. July 5, 2025 at 2:55 AM, 심정민 (Shim Jungmin) : @FA @원승연(Seungyeon Won) 셀 버퍼 창고 누가 확인 중이신가요? July 5, 2025 at 2:59 AM, 원승연(Seungyeon Won) : 박스해체기는 내일 주간까지 비가동 하겠습니다 July 5, 2025 at 3:11 AM, 심정민 (Shim Jungmin) : @FACS_Youngmin LEE @원승연(Seungyeon Won) 일단 AGV 반송모드 끄고 수동 출고해서 적재율 부터 풀어주세요. July 5, 2025 at 3:12 AM, 원승연(Seungyeon Won) : 네 알겠습니다 July 5, 2025 at 3:17 AM, FACS_Youngmin LEE : 셀버퍼 11번 에러는 조치되었습니다. 다만 1번 크레인이 파레트 적재할 곳이 없는 상태입니다. July 5, 2025 at 3:19 AM, 노영일 (Yeongil Noh) : T 공파레트 200개 출고해서 모듈 12라인 뒤로 옮겨주세요 July 5, 2025 at 3:19 AM, 노영일 (Yeongil Noh) : @원승연(Seungyeon Won) July 5, 2025 at 3:21 AM, VK (mcs) : FYI M0STK011 HWM rate :98% full rate 99.48% M0STK012 HWM rate :98% Full rate :100.53% M0STK013 HWM rate :98% Full rate: 97.78% M0STK014 HWM rate: 98% Full rate :93.59% July 5, 2025 at 3:24 AM, 심정민 (Shim Jungmin) : 데이터 꼬임 발생 원인, 적재율 100% 에서도 지속 입고된 원인 확인되시면 우선 공유 부탁드립니다. July 5, 2025 at 3:25 AM, 심정민 (Shim Jungmin) : 수동 출고로 적재율 해소하면 정상 가동 가능한 상황인가요? 다른 조치가 더 필요한 가요? July 5, 2025 at 3:27 AM, KIM SEYEON [김세연]_FA : @FACS_Youngmin LEE 요 내용에 회신 부탁드립니다. July 5, 2025 at 3:31 AM, FACS_JaewonShin : 셀버퍼 1번창고내 알람해소는 되었고 순차 이송중입니다. AGV 전체 재가동중이며 정상가동될것으로 보입니다. 추가문제 있으면 수동이송 요청 드리겠습니다 July 5, 2025 at 3:38 AM, 심정민 (Shim Jungmin) : 모니터링 해주시고, 프로그램 문제 원인 확인되면 공유 부탁드립니다. @FACS_Youngmin LEE July 5, 2025 at 3:42 AM, FACS_Youngmin LEE : 1. 데이터 꼬임이 아니였고 scs상 브릿지 첫번째 버퍼1에 캐리어아이디가 다르게 뜨는 오류였습니다. 2. 적재율은 100%가 아니였습니다. 1번 크레인이 적재할 수 있는 구역에는 모든 파레트가 가득 차있었고 2번 크레인이 적재할 수 있는 곳은 6곳 정도 남아있었습니다. 고로 1번 크레인이 적재 할 수 있는 곳이 없어 크레인 내에 파레트가 적재된 상태로 크레인 언로딩 타임 오버 에러를 띄웠습니다. July 5, 2025 at 3:54 AM, 심정민 (Shim Jungmin) : 1. 캐리어 아이디 오류는 왜 발생했나요? 2. 1번 크레인 적재 할 공간없는데 왜 1번으로 들어갔을까요? 3. 동일 상황에서 2번 크레인 쪽으로 자동 반송은 안되나요? 4. 원인 확인/조치 까지 장기 지연된 사유는 무엇일까요? 화성 생산 정지되어 크게 문제될뻔 한 상황이니, 자세히 공유 부탁드립니다. @FACS_Youngmin LEE July 5, 2025 at 4:23 AM, 원승연(Seungyeon Won) : Please delete the job. It’s urgent. Z102896. @MCS July 5, 2025 at 4:25 AM, VK (mcs) : I already canceled it a few minutes ago. July 5, 2025 at 4:26 AM, 노영일 (Yeongil Noh) : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 동일 내용 재발 건인 것 같은데, 차주 화요일 회의소집 부탁 드리고, 현재 셀버퍼 관련 문제점 파악해서 참석 부탁 드립니다. July 5, 2025 at 4:36 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. @노영일 (Yeongil Noh) July 5, 2025 at 5:18 AM, FACS_JaewonShin : 1. 브릿지 넘어오는 구간에서 데이터받은 후 stk11로 넘겨주게 되는데 bcr리딩후 넘어가게 되어있습니다. 그과정에서 receive data time over 알람이 발생하였고 cim에서 reset하지 않으면 설비에서 리셋 하더라도 알람이 남아있게 되어 알람 지속 발생하였습니다. 그과정에서 데이터 꼬인것으로 확인됩니다. 2. 셀버퍼 Stk이동경로는 반시계방향으로 stk13의 적재량이 올라가면 stk13->stk11->stk12->stk14순으로 이동하게 되는데 이때 stk13 적재량이 올라가면서 stk11로 자재가 브릿지를 통하여 넘어갔습니다. 3. Stk11은 장단폭 겸용으로 크레인2 쪽 다른포트는 장폭포트로 비활성화 되어있습니다. July 5, 2025 at 5:19 AM, FACS_JaewonShin : 4. 1) CIM에서 발생된 알람이 리셋되는데 시간을 많이 소요 하였습니다. 2) 렉투렉 구간 팔레트 인식문제로 센서, PLC, CIM등 다방면의 원인 분석 시간이 필요했습니다. 3) STK11 공간부족으로 메뉴얼 조치하는데 잡 삭제를 위해서는 RTD 명령을 삭제하고 CIM내에서 재설정 해주어야 해서 상호 소통에 시간 소요 되었습니다. July 5, 2025 at 5:32 AM, 원승연(Seungyeon Won) : 버퍼창고 #1 에러 발생해서 한번만 더 확인 부탁드리겠습니다 July 5, 2025 at 5:32 AM, FACS_Youngmin LEE : 네 July 5, 2025 at 5:34 AM, FACS_Youngmin LEE : 조치되었습니다. July 5, 2025 at 5:45 AM, Vadász Dóra SSL/B : Sziasztok Agv#12 útban van. Kérem kuldjetek el. Köszi July 5, 2025 at 5:46 AM, Duna Don : Checking July 5, 2025 at 5:46 AM, FA/CS/AGV_ Asjad : Moved July 5, 2025 at 5:47 AM, Vadász Dóra SSL/B : Thank you July 5, 2025 at 6:31 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.05. 10+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Gerbovits Kevin Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János, Boromisza Zoltán --------- July 5, 2025 at 8:29 AM, 요셉 : EOL 5L The empty pallet is not coming in. Please check July 5, 2025 at 8:32 AM, Duna Don : From AGV side there’s no problem, @MCS/RTD System please check it, Thanks July 5, 2025 at 8:32 AM, MCS/RTD System : There's active job. Everything is okay from MCS. It's currently at M0STK014_P11_BP01 since last 39 mins. July 5, 2025 at 8:33 AM, MCS/RTD System : @FA Please check the port physically July 5, 2025 at 8:45 AM, MCS/RTD System : It's moving now. July 5, 2025 at 9:20 AM, 김대은 : EOL 10line 12agv error check please July 5, 2025 at 9:20 AM, FA/CS/AGV_ Asjad : Coming July 5, 2025 at 9:22 AM, FA/CS/AGV_ Asjad : Solved July 5, 2025 at 9:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 남측 셀 도크 1F M0STK034_C01 크레인 정지 상태입니다 확인 부탁드립니다 July 5, 2025 at 9:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS South cell dock 1F M0STK034_C01 The crane is in a suspended state Please check July 5, 2025 at 9:49 AM, MCS/RTD System : MCP SMC #1 DISCONNECTES ERROR. STILL EXISTS @FA PLEASE CHECK July 5, 2025 at 12:28 PM, Vadász Dóra SSL/B : Sziasztok 1 emeleten a Modul AGV-ket tudná valaki kordában tartani? Bufferből szednénk ki üres palettákat modul 11-12 közé, de folyton útban vannak. Köszönöm July 5, 2025 at 12:29 PM, FA/CS/AGV_ Asjad : Sure, coming July 5, 2025 at 1:23 PM, 김대은 : EOL 9line nearby 6agv error check plz July 5, 2025 at 1:26 PM, Duna Don : Solved July 5, 2025 at 1:31 PM, Duna Don : @Denkó Jani (F.A.) could you please check M0STK011 crane, Thank you! July 5, 2025 at 1:34 PM, Duna Don : There is CIM 1501 Crane PLC Interface error. Thank you! July 5, 2025 at 1:42 PM, Duna Don : Solved, Thanks July 5, 2025 at 1:43 PM, FACS_오창훈_CHANGHOON : M0STK11 & 12 Solved July 5, 2025 at 1:47 PM, Denkó Jani (F.A.) : Thx July 5, 2025 at 2:18 PM, 요셉 : EOL 4,5L The empty pallet is not coming in. Please check July 5, 2025 at 2:22 PM, MCS/RTD System : @FA PLEASE CHEXK M0STK012_P12 S002507 IS STUCK THERE. WHICH WILL GO TO EOL4 July 5, 2025 at 2:32 PM, MCS/RTD System : @FA FOR E0L5 , P01 PORT IS IN MANUAL MODE . PLEASE CHANGE IT TO AUTO July 5, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Sopronyi Gábor Attila Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Novák Károly Novák Zoltán ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 5, 2025 at 6:33 PM, FACS_Youngmin LEE : ■ 5th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 5, 2025 at 6:35 PM, Szentirmai Z. A/SSL : Hello! Please move to EOL AGV#9 to other position. Thank you July 5, 2025 at 6:35 PM, FA/CS/AGV/Taimur : Sure July 5, 2025 at 7:10 PM, 이재근(lee jae geun) : PLZ MOVE AGV6 near10line July 5, 2025 at 7:10 PM, FA/CS/AGV/Taimur : Sure July 5, 2025 at 7:13 PM, 이재근(lee jae geun) : PLZ MOVE AGV12 near9line July 5, 2025 at 7:13 PM, FA/CS/AGV/Taimur : Moving July 5, 2025 at 7:14 PM, 이재근(lee jae geun) : thank you July 6, 2025 at 1:37 AM July 6, 2025 at 1:37 AM, 김성태(Seongtae Kim) : AGV14 check plz July 6, 2025 at 1:37 AM, FA/CS/AGV/Taimur : Checking July 6, 2025 at 3:59 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5. Remark(specialote) : -x July 6, 2025 at 5:39 AM, FACS_Wooseok Choi : ■6th July Ivancsa FA CS - Withes service Day(06:00 - 16:00) Choi wooseok July 6, 2025 at 5:55 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5:54 5. Remark(specialote) : -x July 6, 2025 at 6:15 AM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 2.Machine name : - 포장기 2단 밴딩기 3. Action detail : - 4.Work time -Start : 4:00 -End : 5:54 5. Remark(specialote) : -2번 밴딩기 히팅 제대로 못하고 풀림 커버 탈거 후 내부 클리닝 및 X111 근접센서 클리닝 July 6, 2025 at 6:32 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.06. 9+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Denkó János Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(1): Boromisza Zoltán ------------ July 6, 2025 at 9:12 AM, 최준영(JoonYoung Choi) : Buffer Warehouse #3 SMC#1 Fork Right Collapse Detect Please check July 6, 2025 at 9:26 AM, FACS_오창훈_CHANGHOON : Solved 조치되었습니다. 파레트 바코드 부착 불량 건입니다. July 6, 2025 at 9:28 AM, 최준영(JoonYoung Choi) : 감사합니다~! July 6, 2025 at 10:15 AM, 김대은 : near 9line 18agv check plz July 6, 2025 at 10:18 AM, FA CS AGV Jawad : I check it July 6, 2025 at 10:20 AM, FA CS AGV Jawad : Solved July 6, 2025 at 2:29 PM, Vadász Dóra SSL/B : Sziasztok @Boromisza Zoltán boxon inverter power hiba, kérem nézd meg. Köszönöm July 6, 2025 at 2:30 PM, Boromisza Zoltán : Kész July 6, 2025 at 5:00 PM, Vadász Dóra SSL/B : @Boromisza Zoltán boxon hiba, kérem nézd meg. Köszönöm July 6, 2025 at 5:26 PM, Boromisza Zoltán : Megyek July 6, 2025 at 5:35 PM, Boromisza Zoltán : Kész minden is July 6, 2025 at 5:41 PM, FACS_Youngmin LEE : ■ 6th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 6, 2025 at 5:51 PM, 최준영(JoonYoung Choi) : There is a problem with buffer warehouse #1. Please move AGV #7 to another place for a moment. July 6, 2025 at 5:52 PM, Mohammad Amir : Good evening @FA, Please check M0STK011 ,it is OOs and because of this job for EOL-5&3&1 is getting delayed. Thank you very much! July 6, 2025 at 5:52 PM, FA/CS/AGV/Taimur : Checking July 6, 2025 at 6:00 PM, FACS_Youngmin LEE : solved July 6, 2025 at 6:01 PM, FA/CS/AGV/Taimur : Shall we move AGV:07 from EOL: 11 too? July 6, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Gutenkunst Ábel Zoltán Benczik Ádám Bonnyai Ákos ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 6:08 PM, 원승연(Seungyeon Won) : The box unpacking machine will resume operation from 00:00, and we will proceed by relieving the saturation level of Buffer Warehouse No. 2. @Szentirmai Z. A/SSL @FA July 6, 2025 at 6:12 PM, Szentirmai Z. A/SSL : Then when I enable it, I only release the palettes in buffer#2 July 6, 2025 at 6:17 PM, 원승연(Seungyeon Won) : I was thinking the same, so I’m already working on it. July 6, 2025 at 6:35 PM, Szentirmai Z. A/SSL : If S runs out of cell buffer#2, we can release 16 Z pallets. July 6, 2025 at 6:37 PM, Szentirmai Z. A/SSL : Initialization of the S002355 palette is complete July 6, 2025 at 6:52 PM, 원승연(Seungyeon Won) : There are many pallets in Buffer Warehouse No. 3, but the system is instructing that all empty pallets come only from Warehouse No. 1. Please check and confirm. July 6, 2025 at 6:59 PM, Mohammad Amir : This message was deleted. July 6, 2025 at 7:00 PM, Mohammad Amir : Good evening, Now the job for empty pallet has started to be created from STK013 as well . Empty pallet T704105 has been released to EOL-5 from STK013 on AGV#15 ✅. Thank you very much! July 6, 2025 at 7:05 PM, FA/CS/AGV/Taimur : Thank you for redirecting the logistics, at the movement STK11 is but overwhelmed. July 6, 2025 at 9:32 PM, Magosi Erik : Is there any issue with cell warahouse? No cell plt coming to M4MFA300_P04 July 6, 2025 at 9:32 PM, Mohammad Amir : Checking July 6, 2025 at 9:34 PM, Magosi Erik : M3MFA300_p02 is waiting for cell as well July 6, 2025 at 9:34 PM, Magosi Erik : P03 sry July 6, 2025 at 9:40 PM, Mohammad Amir : There is a job that exists for both ports Module line -4 P04 and Module line -3-P03. Everything is good from MCS RTD side ✅. Currently T704700 currently located at STK011(0100504) has the task to go to line-4_P04 . The T704701 located at STK011(0200413) has the task to go to line -3 P03. These jobs are in queue so as soon as the crane is free it will pick these carriers. @Csepi Árpád , could you please check from SCS side and make sure everything is okay. And please increase priority from SCS side. July 6, 2025 at 9:41 PM, Mohammad Amir : Cause these lines are waiting for pallet for quite some time. Thank you very much! July 6, 2025 at 9:42 PM, Magosi Erik : Thank You Sir July 6, 2025 at 9:43 PM, Mohammad Amir : You are most welcome! I am monitoring this issue. July 6, 2025 at 9:45 PM, FACS_Youngmin LEE : all things solved July 6, 2025 at 9:46 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 9:48 PM, Mohammad Amir : Update:- Issue has been resolved ✅ Now Cell pallet T704700 on AGV#3 on the to Module line -4_P04. Thank you very much! July 6, 2025 at 9:50 PM, Magosi Erik : Thank You Everyone!👍 July 6, 2025 at 9:52 PM, Mohammad Amir : Hello, Could you please check T704701 located at STK011(0200413) ,it is still not moving. I increased the priority but it is not reflecting on SCS side and task is still getting delayed for Module line -3_P03. Thank you very much! July 6, 2025 at 9:58 PM, FACS_Youngmin LEE : now going July 6, 2025 at 9:58 PM, FACS_Youngmin LEE : solved July 6, 2025 at 10:00 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 10:00 PM, FACS_Youngmin LEE : me too! July 6, 2025 at 10:00 PM, Mohammad Amir : Update:- Issue has been resolved ✅ Now Cell pallet T704701 on the way to Module line -3_P03. Thank you very much! July 6, 2025 at 10:38 PM, Magosi Erik : Line3 P03 and Line4 P04 again waiting for cell. Is there any issue? Or @Mohammad Amir do You have any info on cell plt thats in transfering state for these ports? July 6, 2025 at 10:39 PM, Mohammad Amir : Sure, Checking! July 6, 2025 at 10:41 PM, Mohammad Amir : Issue has been resolved ✅ For l-3 P03 AGV#7 on the way. Thank you very much! July 6, 2025 at 10:43 PM, Mohammad Amir : Hello @FACS_Youngmin LEE , Could you please check T704596 located at STK011(0101308) . Everything is good from MCS RTD side ✅. It is not moving,I increased the priority but it is not reflecting on SCS side and task is still getting delayed for Module line -4_P04. Thank you very much! July 6, 2025 at 10:43 PM, Magosi Erik : Is there any possible way to increase priority for these ports. If this goes on it will have an impact on production. Especially on Line4 P04. July 6, 2025 at 10:45 PM, Mohammad Amir : Sure,I will keep increasing the priority for module line-4_P04. When supply will be stable and production will be normalised,I will set it back to standard. Please let me know when supply is stable. I am monitoring. Thank you very much! July 6, 2025 at 10:45 PM, Magosi Erik : I will. Thank You Sir July 6, 2025 at 10:45 PM, Mohammad Amir : Update :- For Module line-4_P04, Issue has been resolved ✅. Now Cell pallet T704596 on the way. Thank you very much! July 6, 2025 at 10:46 PM, Mohammad Amir : You are most welcome! July 6, 2025 at 10:50 PM, Mohammad Amir : @Magosi Erik Please let me know ,are you also facing issue in supply of cell pallet for module line -3_P03? Is production getting affected? Thank you very much! July 6, 2025 at 10:55 PM, Magosi Erik : Line 3 is OK now. If You set priority to standard there we gonna be OK. If anything happens i will let You know. Line 4 is a different story. Line 4 p04 is almost empty. Thats why i asked the increased priority. If the port is going to be full I will let You know so You can take the prio back to normal July 6, 2025 at 10:56 PM, Magosi Erik : Thank You July 6, 2025 at 10:56 PM, Mohammad Amir : Thank you very much for the confirmation! I am focusing on line-4_P04. Thank you very much! July 6, 2025 at 10:58 PM, Mohammad Amir : @FA @Csepi Árpád Please check STK011 it is OOs and because of this empty pallet job for EOL -5&6& full pallet job for EOL-10 is getting delayed. Thank you very much! July 6, 2025 at 10:59 PM, FACS_Youngmin LEE : solved July 6, 2025 at 10:59 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 11:02 PM, Mohammad Amir : AGV#11 on the way with cell pallet to Module line-4_P04 ✅. Thank you very much! July 6, 2025 at 11:03 PM, Magosi Erik : Thank You July 6, 2025 at 11:04 PM, Mohammad Amir : You are welcome! July 6, 2025 at 11:14 PM, Mohammad Amir : Update:- New cell pallet T702704 on the way to Module line-4_P04 on AGV#4 ✅. Thank you very much! July 6, 2025 at 11:18 PM, Magosi Erik : 2 more cell pallet for Line4 P04 and You can set the priority to standard. Thank You very much Sir July 6, 2025 at 11:18 PM, Mohammad Amir : Sure,I am working on it. Thank you very much! July 6, 2025 at 11:22 PM, Mohammad Amir : Update:- New cell pallet T702987 on the way to Module line -4_P04 on the AGV#9 ✅. Thank you very much! July 6, 2025 at 11:29 PM, Magosi Erik : Port is full now. It was a little miscalculation from my part. You can set priority back to standard. Thank You Sir for the fast responses and actions! July 6, 2025 at 11:30 PM, Mohammad Amir : You are most welcome! Fell free to contact me immediately if you face issues in production again. Thank you very much! July 7, 2025 at 12:50 AM July 7, 2025 at 12:50 AM, 원승연(Seungyeon Won) : 안녕하세요 PM님 현재 버퍼창고 적재율 #1 79.06% #2 97.38% #3 83.46% #4 85.39% 저희가 오늘 주간 6시부터 3번 버퍼 창고 적재율 해소를 위해 박스포장기 출고나 브릿지 이동 작업을 거의 450 팔레트 이상 했습니다. 그런데 다른 버퍼창고 적재율을 많이 내린 상태인데 불구하고 대부분 팔레트가 버퍼창고 1번으로 투입되고 2번 버퍼창고로 렉투렉 작업해서 다시 적재율을 올려버립니다. 확인 부탁드리겠습니다 감사합니다 @배병민 (Bae Byoungmin) @심정민 (Shim Jungmin) @노영일 (Yeongil Noh) July 7, 2025 at 3:39 AM, 원승연(Seungyeon Won) : Plz check Buffer warehouse #1 @FA Tech July 7, 2025 at 3:40 AM, FACS_Youngmin LEE : going July 7, 2025 at 3:40 AM, Mohammad Amir : @FACS_Youngmin LEE Please check STK011_P12 there is Data Mismatch error and it is blocking several jobs. Thank you very much! July 7, 2025 at 3:40 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 3:40 AM, FA/CS/AGV/Taimur : Working on it. July 7, 2025 at 3:40 AM, Mohammad Amir : Thank you very much for the confirmation! July 7, 2025 at 3:41 AM, 원승연(Seungyeon Won) : A mismatch error occurred after Buffer Warehouse 2 reached 98%. July 7, 2025 at 4:12 AM, FACS_Youngmin LEE : solved July 7, 2025 at 4:12 AM, Mohammad Amir : Thank you very much 🙏. July 7, 2025 at 5:38 AM, FACS_Wooseok Choi : ■7th July Ivancsa FA CS - Withes service Day(06:00 - 16:00) Choi wooseok July 7, 2025 at 5:50 AM, duzzaman Md (MCS) : @FA Good morning! Please check M0STK012_P06 CARRIER DATA RECEIVE TIMEOUT. Thank you July 7, 2025 at 5:54 AM, duzzaman Md (MCS) : Also please check M0STK027_C01, Crane fork right collapse detect 1 Thank you! July 7, 2025 at 5:56 AM, FACS_Wooseok Choi : The pallet is exactly where it is now. solved July 7, 2025 at 5:57 AM, FACS_Wooseok Choi : And the pallet is no destination. Thank u July 7, 2025 at 5:59 AM, duzzaman Md (MCS) : Thank you. Have a good day! July 7, 2025 at 5:59 AM, FACS_Youngmin LEE : 25.07.06(일)-25.07.07(월) SK OH2 Module Night Shift CS Action Details 1.Machine name : Cell buffer STK13->STK11 브릿지 홈스탠드 2.Action detail : 데이터 미스 매치 에러. 아무 센서감지 X 스탑센서 감지까지 파레트 이동 후 재가동 3. Remark(special note) -x 1.Machine name : Cell buffer 2.Action detail : UNK 파레트 정리 3. Remark(special note) -x July 7, 2025 at 6:20 AM, FACS_Wooseok Choi : Sloved July 7, 2025 at 6:58 AM, R. József C SL EOL : Jó reggelt Mai nap gőzerővel megy a boxpacking Több mint 300 paletta van rá kérve July 7, 2025 at 7:40 AM, duzzaman Md (MCS) : @FA Please check M0STK035_C01 there MCP Ankle Detection Left. Thank you very much! July 7, 2025 at 7:53 AM, Döme György F.A : Yes, I’m still waiting for assistance. The "Fork not home" error hasn’t been resolved yet. July 7, 2025 at 7:54 AM, duzzaman Md (MCS) : Thank you for the information. July 7, 2025 at 8:21 AM, Balázs Róbert SL : 1es sorra nem hozza az AGV a cellát. Nézzétek meg légyszíves. Köszönöm July 7, 2025 at 9:06 AM, Balázs Róbert SL : 1Line,not cell AGV.Please check July 7, 2025 at 9:11 AM, Reisz Tibor : 3Line,not cell AGV.Please check July 7, 2025 at 9:12 AM, Duna Don : AGV#9 just delivered the material. Thank you! July 7, 2025 at 9:17 AM, Balázs Róbert SL : 1 Line unloading cell,not AGV empty dunnage. Please check July 7, 2025 at 9:32 AM, Reisz Tibor : The AGV has not arrived yet. July 7, 2025 at 9:45 AM, 윤성제(Yoon SungJe) : It will be delivered in the order of module 4>1>3. July 7, 2025 at 9:48 AM, Duna Don : There was an issue with STK14 right now AGV#7 is going to M3MFA300_P01 Sorry for the delay. Thank you July 7, 2025 at 9:55 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS @배병민 (Bae Byoungmin) M0STK035 Location : 0200104 Carrier id : UNKDUP-Z100971A-2 해당 실물이 자동화 창고안에 적치 되어 있는지요? 확인 가능하실가요? 해당 carrier id 는 완제품 팔렛트라서 확인이 필요해 보입니다. July 7, 2025 at 9:56 AM, FACS_오창훈_CHANGHOON : 확인하고 연락 드리겠습니다 July 7, 2025 at 9:57 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 감사합니다 July 7, 2025 at 10:08 AM, Balázs Róbert SL : 1Line,not cell AGV.Please check July 7, 2025 at 10:11 AM, FACS_오창훈_CHANGHOON : 해당 위치 실물 존재하고 파레트 id Z100967입니다 July 7, 2025 at 10:23 AM, Reisz Tibor : Line 4 does not take empty cell pallets to the agv July 7, 2025 at 10:37 AM, Sazzad Bhai SKon : The job is ok. ACS replied the job with normal. July 7, 2025 at 11:37 AM, SKOH2/제조-셀,모듈 출하/김병호 : 확인 감사합니다. 해당제품 실물확인이 필요하여 M0CNV036_M02 포트로 수동 배출 부탁드립니다 July 7, 2025 at 11:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS 남측 셀 완제품 창고 1F M0STK034_P11 정지 상태입니다. 확인 부탁드립니다 July 7, 2025 at 11:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS South cell finished product warehouse 1F M0STK034_P11 It is suspended. Please check July 7, 2025 at 11:40 AM, 유경호(RYU KYEONGHO) : @fa please check box unpacking machine. i think,,macine do not work. and pallet's release in the buffer for box packing is very slow. July 7, 2025 at 11:40 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS @Bae Byoungmin[배병민]FA M0STK035 Location : 0200104 Carrier id : UNKDUP-Z100971A-2 Destination : M0CNV036_M02 실물확인이 필요하여 수동 배출 부탁드립니다 July 7, 2025 at 11:42 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS @Bae Byoungmin[배병민]FA M0STK035 Location : 0200104 Carrier id : UNKDUP-Z100971A-2 Destination : M0CNV036_M02 I need to check the real thing. Please take it out manually. July 7, 2025 at 11:45 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK034 뱅크 후단 1F에 RTV 계속 서 있습니다. 출하 제품 배출하고있어 빠른 확인 부탁드립니다. July 7, 2025 at 11:54 AM, duzzaman Md (MCS) : @FA Could you please check MOCNV036_RTV01 in priority basis ? Everything is good from MCS, it's been inactive since 11:23 and blocking jobs. Thank you July 7, 2025 at 12:01 PM, SKOH2/제조-셀,모듈 출하/김병호 : M0STK034 뱅크 문제좀 확인 부탁드입니다. 40분 넘도록 대기중입니다. July 7, 2025 at 12:15 PM, FACS_오창훈_CHANGHOON : 조치 되었습니다 July 7, 2025 at 12:16 PM, duzzaman Md (MCS) : Job created already. Its queued. Thank you July 7, 2025 at 3:05 PM, R. József C SL EOL : Boxpacking betöltő oldalra gyertek kérlek Van egy paletta amit ki kell venni, megy a targis kolléga, segítsetek neki az agv-vel kapcsolatban Köszönöm July 7, 2025 at 3:06 PM, FA CS AGV Jawad : I am already there for AGV. July 7, 2025 at 5:07 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek boxpackingre. Vacuum probléma van July 7, 2025 at 5:08 PM, Zoltán Harasztia FA : Itt vagyunk July 7, 2025 at 5:14 PM, Zoltán Harasztia FA : Kész July 7, 2025 at 5:52 PM, Sási Zsolt SL/C/ EOL : Gyertek kérlek 3as sorral szemben a cell bufferhez. 13as AGV és buffer is hibával áll July 7, 2025 at 5:53 PM, FA-CS-AGV-Masoud : Coming July 7, 2025 at 5:57 PM, FA-CS-AGV-Masoud : Solved July 7, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 7, 2025 at 6:37 PM, 유경호(RYU KYEONGHO) : @박태영 @이영혁 paul 안녕하십니까. 이반차 화성 유경호PM입니다. RTD-반송관리-CELL 해체기 반송 관리에서 목표 수량 변경이 불가능하여 문의드립니다. July 7, 2025 at 6:50 PM, 김 민성 : Pm님 팝업 띄우고 submit 을 눌렀는데 적용이 안된다는 말씀이실까요? July 7, 2025 at 6:52 PM, 유경호(RYU KYEONGHO) : 네 맞습니다 July 7, 2025 at 6:58 PM, 이영혁 paul : 저장 잘되는걸로 보입니다 July 7, 2025 at 6:58 PM, 이영혁 paul : submit 하면 바로 변경됩니다 팝업창은 그대로 있구요 July 7, 2025 at 7:00 PM, 유경호(RYU KYEONGHO) : 네. 그렇게 한 후 검색 다시 해보면 변경 안된 상태입니다. July 7, 2025 at 7:01 PM, 이영혁 paul : 아 넵 확인해보겠습니다 July 7, 2025 at 7:25 PM, Szabolcs : @FA M0STK035_C01 crane problem. Check please. July 7, 2025 at 7:25 PM, FACS_Hyeongi Son : Going July 7, 2025 at 7:26 PM, Atom Yang(MCS/RTD) : 다시 한번 수정 부탁드립니다. July 7, 2025 at 7:30 PM, 유경호(RYU KYEONGHO) : 변경 가능해졌습니다. 감사합니다 July 7, 2025 at 7:46 PM, FACS_Hyeongi Son : It's all fine July 7, 2025 at 7:56 PM, 채효석(Hyoseok CHAE) : 10LINE EMPTY PLT Not AGV July 7, 2025 at 7:57 PM, FA-CS-AGV-Masoud : @VK (mcs) could you please check it?? July 7, 2025 at 8:00 PM, VK (mcs) : @FA Please check 3rd cell buffer M0STK013 Z103095 assigned an hour ago but status of job still is queue. Thx July 7, 2025 at 8:00 PM, FACS_Hyeongi Son : Checking July 7, 2025 at 8:05 PM, FACS_Hyeongi Son : Now working The cargo is on the move now July 7, 2025 at 8:05 PM, FACS_TaehyeongJin : Solved July 7, 2025 at 8:57 PM, Czébely Dániel SL—D : Sziasztok kellene egy kis segítség a kicsomagolóhoz July 7, 2025 at 8:57 PM, N.Gábor F.A. : Megyek July 7, 2025 at 8:57 PM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. July 7, 2025 at 8:58 PM, Czébely Dániel SL—D : Köszi July 8, 2025 at 3:08 AM July 8, 2025 at 3:08 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 C/V data mismatch July 8, 2025 at 3:43 AM, Éváné Bori Viktória : Sziasztok! Box packing, a szétszedőnél o2u20 lightcourtain Alarm hibát jelez. Kérlek nézzétek meg! @N.Gábor F.A. @Dávid F.A. July 8, 2025 at 3:52 AM, FACS_Hyeongi Son : Solved July 8, 2025 at 5:56 AM, 정연동 left this chatroom. July 8, 2025 at 6:39 AM, R. József C SL EOL : Eol 5-6 előtt jelez az agv Nézzétek meg kérlek July 8, 2025 at 6:39 AM, FA/CS/AGV_ Asjad : Checking July 8, 2025 at 6:39 AM, FA/CS/AGV_ Asjad : Solved July 8, 2025 at 6:55 AM, Sási Zsolt SL/C/ EOL : 6os AGV áll hibával a 3as sorral szemben a buffer előtt. Kérlek nézzétek meg July 8, 2025 at 6:55 AM, FA/CS/AGV_ Asjad : Coming July 8, 2025 at 6:58 AM, FA/CS/AGV_ Asjad : Solved July 8, 2025 at 7:41 AM, FACS_Wooseok Choi : ■8th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Choi wooseok July 8, 2025 at 7:47 AM, R. József C SL EOL : Boxpackingra gyertek kérlek Kicsomagolót nem engedi elindítani Sidecovernál July 8, 2025 at 7:48 AM, Döme György F.A : Megyek July 8, 2025 at 7:48 AM, R. József C SL EOL : Köszönöm July 8, 2025 at 7:59 AM, Döme György F.A : Kész July 8, 2025 at 8:29 AM, Sási Zsolt SL/C/ EOL : Boxpackingra menjetek kérlek. Probléma van July 8, 2025 at 8:30 AM, Zoltán Harasztia FA : Megyünk July 8, 2025 at 9:02 AM, R. József C SL EOL : Boxpackingra menjetek kérlek. Probléma van July 8, 2025 at 9:02 AM, Zoltán Harasztia FA : Megyek July 8, 2025 at 9:06 AM, Zoltán Harasztia FA : Kész July 8, 2025 at 9:17 AM, R. József C SL EOL : Köszönöm July 8, 2025 at 9:26 AM, Sási Zsolt SL/C/ EOL : Küldjétek el kérlek a 13as AGVt. Útban van July 8, 2025 at 9:26 AM, FA/CS/AGV_ Asjad : Sure July 8, 2025 at 9:28 AM, FA/CS/AGV_ Asjad : Done July 8, 2025 at 10:59 AM, Sási Zsolt SL/C/ EOL : 3as buffel áll hibával az Eol3al szemben. Nézzetek meg kérlek July 8, 2025 at 2:57 PM, R. József C SL EOL : Eol 7-8 előtt útban van az agv #15 Küldjétek el kérlek July 8, 2025 at 2:58 PM, FA/CS/AGV_ Asjad : Sure July 8, 2025 at 2:58 PM, R. József C SL EOL : 4 paletta erejéig July 8, 2025 at 2:59 PM, FA/CS/AGV_ Asjad : Done July 8, 2025 at 2:59 PM, R. József C SL EOL : Thank you July 8, 2025 at 4:18 PM, 최준영(JoonYoung Choi) : GF 버퍼창고#3 In C/V 라이트 커튼 감지 에러 확인 부탁드립니다. AGV에서 창고로 파레트 투입중에 걸려있습니다. July 8, 2025 at 4:25 PM, 배병민 (Bae Byoungmin) : @FACS_JaewonShin @FACS_Bareum kim 같이 확인좀 부탁드립니다. July 8, 2025 at 4:32 PM, FACS_JaewonShin : 조치완료했습니다 July 8, 2025 at 5:53 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(1): Novák Károly Elektróda:(2) Oláh András, Szabadi Miklós, Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 8, 2025 at 5:59 PM, R. József C SL EOL : Sziasztok boxpackingra gyertek kérlek betoltestől kellene elkuldeni az agvt Kérlek küldjétek majd be a paletta ID-t Targoncás érkezik levenni July 8, 2025 at 5:59 PM, R. József C SL EOL : Köszönöm July 8, 2025 at 6:20 PM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok az unpackingon a dupla magas palle poziciónál bele ér a palleta fénykapuba ezt tudnátok orvosolni ? July 8, 2025 at 6:20 PM, N.Gábor F.A. : Megnézzük July 8, 2025 at 6:57 PM, Őri Imre : Üdv! July 8, 2025 at 6:58 PM, Őri Imre : 1 sor magas raktár kiadagolásnál hiba van! Meg tudnátok nézni? Köszi! July 8, 2025 at 6:59 PM, N.Gábor F.A. : Megnézzük July 8, 2025 at 7:02 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.08 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 19:02 -End : 5. Remark(special note) : -X July 8, 2025 at 7:05 PM, 한상범(Han Sang Beom) : @FA Please check AGV#12 July 8, 2025 at 7:05 PM, FA-CS-AGV-Masoud : Coming July 8, 2025 at 7:05 PM, Dávid F.A. : Local?! July 8, 2025 at 7:06 PM, Mohammad Amir : @FA @Dávid F.A. Good evening, Please check STK014 there is Firesensor abnormal state alarm. Thank you very much! July 8, 2025 at 7:06 PM, FACS_Hyeongi Son : Checking July 8, 2025 at 7:07 PM, FA-CS-AGV-Masoud : Solved July 8, 2025 at 7:08 PM, Őri Imre : Szuper lett. Csak most meg xar a raklap és emiatt megált a kis AGV (cry)(cry)(cry) July 8, 2025 at 7:45 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.08 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 19:02 -End : 19:45 5. Remark(special note) : -1열6행6단 연기감지기 교체 July 8, 2025 at 7:49 PM, FACS_Hyeongi Son : Solved July 8, 2025 at 7:49 PM, Mohammad Amir : Thank you very much n July 8, 2025 at 8:01 PM, Nagy Mónika : Line4 block2 betöltèsnèl nem hoz alapanyagot az AGV. Rànèznètek? Köszi July 8, 2025 at 8:02 PM, Mohammad Amir : Good evening, Please press Material request again. Thank you very much! July 8, 2025 at 8:04 PM, Nagy Mónika : Thank you. 🙂 July 8, 2025 at 8:04 PM, Mohammad Amir : You are welcome! July 8, 2025 at 8:09 PM, Mohammad Amir : This message was deleted. July 8, 2025 at 8:10 PM, Mohammad Amir : Update :- Issue has been resolved now ✅ Now pallet S002629 on the way to Line-4. I am monitoring. Thank you very much! July 8, 2025 at 8:13 PM, Dávid F.A. : Have a nice evening! Thanks for the information! July 8, 2025 at 8:13 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 8:27 PM, Mohammad Amir : @Dávid F.A. Good evening, Please check M0STK012_P06 it is in Manual mode and it is blocking one job. Please make this port in Auto. Thank you very much! July 8, 2025 at 8:33 PM, Mohammad Amir : @FA Please check M0STK011_P05 there is data Mismatch error. Thank you very much! July 8, 2025 at 8:33 PM, FACS_Hyeongi Son : Checking July 8, 2025 at 8:34 PM, FACS_Hyeongi Son : Solved July 8, 2025 at 8:34 PM, FACS_Hyeongi Son : Also solved July 8, 2025 at 8:35 PM, Mohammad Amir : Dear @FACS_Hyeongi Son Sir, Thank you very much for your work.🙏 July 8, 2025 at 9:10 PM, Mohammad Amir : @FACS_Hyeongi Son Sir, Please check STK013 there is STK action 5 minutes time over error because of this several jobs are pending. Thank you very much! July 8, 2025 at 9:10 PM, FACS_Hyeongi Son : Going July 8, 2025 at 9:11 PM, N.Gábor F.A. : Solved July 8, 2025 at 9:12 PM, Mohammad Amir : Thank you very much! July 8, 2025 at 9:23 PM, N.Gábor F.A. : Can you come to STK013? July 8, 2025 at 9:23 PM, FACS_Hyeongi Son : Okiii July 8, 2025 at 9:43 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.08 2.Machine name : -M0STK013 3. Action detail : -STK plc and program checking 4.Work time -Start : 21:30 -End : 5. Remark(special note) : - July 8, 2025 at 9:44 PM, Szabolcs : M0STK035_C01 crane problem. Check please. July 8, 2025 at 9:51 PM, 한상범(Han Sang Beom) : EOL 2Line Empty Pallet is not available. Please confirm. @FA July 8, 2025 at 9:51 PM, Mohammad Amir : Sure, checking! July 8, 2025 at 9:53 PM, Mohammad Amir : Hello, There is an active job for empty pallet however currently originate STK013 is OOS. That's why you are witnessing delay. Please let me know if you need empty pallet urgently or is production getting affected because of this? Thank you very much! July 8, 2025 at 9:55 PM, 한상범(Han Sang Beom) : There's nothing in the queue now, we need to get it right in. July 8, 2025 at 9:55 PM, Mohammad Amir : Dear @All, For your information:- Empty pallet trasfer to EOL-9 will be delayed as currently source warehouse STK013 is under maintenance. We ask for your patience and feel free to let me know if you need urgently the empty pallet for EOL-9. Thank you very much! July 8, 2025 at 9:56 PM, Mohammad Amir : Sure, I am working on it. Please when I will inform you press LR again for empty pallet. Thank you very much! July 8, 2025 at 9:57 PM, Mohammad Amir : Issue has been resolved ✅. Please press Load request again for empty pallet at EOL-2 now. Thank you very much! July 8, 2025 at 10:00 PM, Mohammad Amir : @한상범(Han Sang Beom) Kindly ,press Load Request. Thank you very much! July 8, 2025 at 10:02 PM, 한상범(Han Sang Beom) : I can't make a load request. July 8, 2025 at 10:03 PM, Mohammad Amir : @Dávid F.A. Hello, Could you please press Load Request at EOL-2 for empty pallet. Thank you very much! July 8, 2025 at 10:06 PM, Dávid F.A. : It is handled by production workers! Thank you for the information! July 8, 2025 at 10:12 PM, Czébely Dániel SL—D : @Dávid F.A. @N.Gábor F.A. Sziasztok az EOL 9-esre is késik a kiszámítása meg tudnátok nézni hogy nincs valami gond ? July 8, 2025 at 10:13 PM, Mohammad Amir : @Czébely Dániel SL—D Due to this issue you are witnessing delay. Please let me know ,is there shortages of empty pallet ? Thank you very much! July 8, 2025 at 10:16 PM, Mohammad Amir : Dear @All, As there was shortages of empty pallet for EOL-2 and because of STK013 maintenance it was getting delayed and production was getting affected. Now I have resolved the issue ✅ And empty pallet T704502 on the way from STK011 to EOL-2. Thank you very much! July 8, 2025 at 10:17 PM, Mohammad Amir : @한상범(Han Sang Beom) For your information. Thank you very much! July 8, 2025 at 10:18 PM, Mohammad Amir : Issue has been resolved ✅. Now empty pallet on the way to EOL-9 as well. I am monitoring. Thank you very much! July 8, 2025 at 10:23 PM, Mohammad Amir : Update :- AGV#10 on the way with empty pallet Z103127 on the way to EOL-9. ✅ Thank you very much! July 8, 2025 at 10:25 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.08 2.Machine name : -M0STK013 3. Action detail : -STK plc and program checking 4.Work time -Start : 21:30 -End : 22:17 5. Remark(special note) : -프로그램 원복 July 8, 2025 at 10:25 PM, Mohammad Amir : Update :- AGV#9 on the way to EOL-2 with empty pallet T704502 ✅. Thank you very much! July 8, 2025 at 10:27 PM, Dávid F.A. : Befejeződött STK 013 raktár javítása ! Zavartalanul elindul EOL-9 ellátása! July 8, 2025 at 10:29 PM, Nagy Mónika : Line4 kitöltèsnèl az AGV work data missmatch alarm hibával àll. Rànèznètek? Köszönöm.☺️ July 8, 2025 at 10:29 PM, Dávid F.A. : I'll check it out. July 8, 2025 at 10:31 PM, FA-CS-AGV-Masoud : Solved July 8, 2025 at 10:32 PM, Nagy Mónika : Thank you!🙂 July 8, 2025 at 10:42 PM, FACS_Hyeongi Son : @SL Please call the forklift -Box packing July 8, 2025 at 10:43 PM, FACS_Hyeongi Son : @Czébely Dániel SL—D July 8, 2025 at 10:47 PM, Czébely Dániel SL—D : Oke July 8, 2025 at 10:47 PM, FACS_Hyeongi Son : @MCS Hello Please check about EOL#5 job July 8, 2025 at 10:48 PM, Mohammad Amir : Sure, checking July 8, 2025 at 10:49 PM, Mohammad Amir : Could you please check M0STK014_P05 and confirm is it empty or there is some carrier ? Thank you very much! July 8, 2025 at 10:50 PM, FACS_Hyeongi Son : Just moment Checking July 8, 2025 at 10:51 PM, FACS_Hyeongi Son : There is nothing there July 8, 2025 at 10:52 PM, 배병민 (Bae Byoungmin) : 포트 OP Box 상태도 확인 해주세요 July 8, 2025 at 10:53 PM, 유용호 : EOL 5-line ball pallet is not being put in. Please check it. Currently, it is being put in manually. July 8, 2025 at 10:53 PM, FACS_Hyeongi Son : And I need a forklift in the box packing unpacking machine to get the cargo in M0STK14_P10 July 8, 2025 at 10:53 PM, Mohammad Amir : I am working on it. July 8, 2025 at 10:54 PM, Czébely Dániel SL—D : Az EOL 10-es sor elején a 12-AGV nem kezeli megfelelően a palleta adatott. July 8, 2025 at 10:54 PM, FACS_Hyeongi Son : OP는 정상이고 지금 박스해체기에서 높이에러 났는데 여기 지금 지게차가 필요해서 요청한 상황입니다 지게차로 빼서 포트로 가야 합니다 July 8, 2025 at 10:54 PM, Mohammad Amir : Could you please check in SCS , current location of S002641? It last location was STK014_P05 and afterwards it was removed manually. Thank you very much! July 8, 2025 at 10:54 PM, FA-CS-AGV-Masoud : Coming July 8, 2025 at 10:55 PM, Mohammad Amir : Please check this issue quickly as there is shortages of empty pallet on EOL-5 . Thank you very much! July 8, 2025 at 10:56 PM, FA-CS-AGV-Masoud : Solved July 8, 2025 at 11:06 PM, Mohammad Amir : @FACS_Hyeongi Son Please inform me what is the current location of S002641 in the SCS side? Thank you very much! July 8, 2025 at 11:06 PM, FACS_Hyeongi Son : Okiii Checking July 8, 2025 at 11:15 PM, FACS_Hyeongi Son : M0STK011-014 don‘t have all July 8, 2025 at 11:15 PM, Mohammad Amir : Thank you very much for the confirmation! July 8, 2025 at 11:16 PM, Mohammad Amir : This message was deleted. July 8, 2025 at 11:18 PM, Mohammad Amir : Dear @All, I have resolved the Issue successfully for EOL-5 ✅. Now empty pallet S002627 on the way to EOL-5 on AGV#6. I am monitoring. Thank you very much! July 8, 2025 at 11:18 PM, Mohammad Amir : This message was deleted. July 8, 2025 at 11:19 PM, Mohammad Amir : @FACS_Hyeongi Son @유용호 For your information as well. Thank you very much! July 8, 2025 at 11:20 PM, 유용호 : Thank you for the confirmation. July 8, 2025 at 11:20 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 11:23 PM, Mohammad Amir : Update:- Empty pallet S002627 has successfully arrived at EOL-5 ✅. Thank you very much! July 8, 2025 at 11:57 PM, Mohammad Amir : @FA Please check STKC013_C01 there is MCP SMC#2 Disconnected Error and it is blocking several jobs. Thank you very much! July 8, 2025 at 11:57 PM, FACS_Hyeongi Son : Going July 8, 2025 at 11:59 PM, Nagy Mónika : Sajnos a line4 kitöltèsnèl az AGV olyan palettát hozott ami deformàlt, ìgy a gép nem tudja azonosítani. Tudnátok segíteni a megoldásban? Vissza küldeni esetleg? July 9, 2025 at 12:06 AM July 9, 2025 at 12:06 AM, N.Gábor F.A. : @FA-CS-AGV-Masoud July 9, 2025 at 12:09 AM, FA-CS-AGV-Masoud : There is no error for the AGV July 9, 2025 at 12:10 AM, Mohammad Amir : Hello, It seems this pallet already delivered. Could you please tell me pallet Id ,if issue still exists? Thank you very much! July 9, 2025 at 12:12 AM, FACS_TaehyeongJin : Solved July 9, 2025 at 12:12 AM, Mohammad Amir : Thank you very much! July 9, 2025 at 12:13 AM, FA-CS-AGV-Masoud : Yes pallet is delivered,but its was deformed Id: U031845 July 9, 2025 at 12:15 AM, Mohammad Amir : Yes,if you would need any assistance from the MCS RTD side for this pallet,feel free to contact me anytime. Thank you very much! July 9, 2025 at 2:56 AM, FACS_Hyeongi Son : @all If there are firefighters around, please tell them to solve the fire shutter in the 1F M0CNV035 area. July 9, 2025 at 3:06 AM, FACS_TaehyeongJin : @mcs M0CNV032 P02 Pallete id S002718 There is no destination plz check July 9, 2025 at 3:06 AM, Mohammad Amir : Sure, checking! July 9, 2025 at 3:09 AM, Mohammad Amir : Issue has been resolved ✅ Now carrier will go to Cell packing (P03) with AGV#10. I am monitoring. Thank you very much! July 9, 2025 at 3:12 AM, FACS_TaehyeongJin : Cancel task AGV10 and assign it to another AGV plz July 9, 2025 at 3:14 AM, Mohammad Amir : Unfortunately I do not have authority to send it to Process machine(F0BPM012) directly. I will suggest that let me transfer this pallet back to the warehouse and afterwards it will come following the automation process. Should I transfer it back to Warehouse? Thank you very much! July 9, 2025 at 3:18 AM, FACS_TaehyeongJin : Yes back to warehouse plz July 9, 2025 at 3:18 AM, Mohammad Amir : Sure, working on it. July 9, 2025 at 3:21 AM, Mohammad Amir : Now ,issue has been resolved ✅ And AGV#9 has been assigned to deliver it back to source warehouse. Now CNV032_P02 will be free to let the materials go to the process. I am monitoring. Thank you very much! July 9, 2025 at 3:22 AM, Mohammad Amir : @FA Please check CNV032_P02 there is Stop detect error and it is blocking some jobs. Thank you very much! July 9, 2025 at 3:22 AM, FACS_Hyeongi Son : Solved July 9, 2025 at 3:29 AM, Mohammad Amir : Update : The carrier S002718 has successfully stored in it's source warehouse STK034(0202002) ✅. Thank you very much! July 9, 2025 at 3:33 AM, Mohammad Amir : @FA Please check STK013_C01/C02 ,it is OOS. Thank you very! July 9, 2025 at 6:22 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.09. 8+1/12+1 Tech, 0Sl, 1Sup. Overtime(0): Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(1): Pintye Miklós Shift Change(0): --------------- Electrode(3): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, --------------- Assy GF (2): Kovács Ágnes, CsanálosiGábor, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Takács Ádám --------------- Form/Modul(1): Gerbovits Ke July 9, 2025 at 7:47 AM, FACS_Wooseok Choi : ■9th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Choi wooseok July 9, 2025 at 10:38 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 남측 셀 완제품 창고 RTD 잡생성을 9시 23분에했는데 M0STK035 창고에 제품이 배츨되지 않고 있습니다.빠른 확인 부탁드립니다 July 9, 2025 at 10:39 AM, FACS_Wooseok Choi : 넵 알겠습니다 July 9, 2025 at 10:40 AM, Duna Don : Solved! July 9, 2025 at 10:46 AM, 원승연(Seungyeon Won) : 박스포장기 2단 왼쪽밴딩끈이 자주 파단나는데 확인 부탁드립니다. 박스포장기 생산 지연되고 있습니다 @FA @유경호(RYU KYEONGHO) @정낙정(JEONG NAK JEONG) July 9, 2025 at 10:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : It's not moving yet July 9, 2025 at 10:48 AM, Shakir (MCS) : @FA team checking July 9, 2025 at 10:48 AM, SKOH2/제조-셀,모듈 출하/김병호 : It's not moving yet. Please check it again. July 9, 2025 at 10:49 AM, Duna Don : FA team working on it. Thank you July 9, 2025 at 11:12 AM, FACS_Wooseok Choi : Z102870파레트를 가지고 크레인이 동작하지 않아, 일단 그 파레트 임시 적재 후 잡 진행하겠습니다. 잡 끝나면 메뉴얼로 기동하여 출하 쪽으로 보내겠습니다. July 9, 2025 at 11:19 AM, 배병민 (Bae Byoungmin) : @FACS_Wooseok Choi 박스 포장기 확인 점검 되었을까요? July 9, 2025 at 11:21 AM, FACS_Wooseok Choi : 조치 완료 했습니다. July 9, 2025 at 11:22 AM, SKOH2/제조-셀,모듈 출하/김병호 : 아직 나오지 않고 있습니다 July 9, 2025 at 11:23 AM, SKOH2/제조-셀,모듈 출하/김병호 : M0CNV036_P13포트에 정지된 상태입니다 July 9, 2025 at 11:31 AM, FACS_Wooseok Choi : 조치 완료했습니다. July 9, 2025 at 11:34 AM, SKOH2/제조-셀,모듈 출하/김병호 : 감사합니다 July 9, 2025 at 12:33 PM, 김성태(Seongtae Kim) : AGV 10 Please check. July 9, 2025 at 12:33 PM, FA CS AGV Jawad : Working on it July 9, 2025 at 12:36 PM, FA CS AGV Jawad : Solved July 9, 2025 at 12:45 PM, 김성태(Seongtae Kim) : Please check the delay in supply of Empty Pallet on Line 5. July 9, 2025 at 12:47 PM, Duna Don : STK13-P05 was under alarm now I have solved it and AGV#15 is on the way. Thank you July 9, 2025 at 12:52 PM, Duna Don : AGV#15 has successfully delivered the pallet to F5CPM010_P01. Thank you! July 9, 2025 at 12:54 PM, Shakir (MCS) : Now supply of empty pallets to Line 5 normalize ✅ AGV18 on the way to EOL5 Thank you July 9, 2025 at 1:11 PM, 원승연(Seungyeon Won) : 재발생하였습니다. 확인부탁드립니다 July 9, 2025 at 1:22 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS 남측 셀 완제품 창고 1F M0STK035_C01 정지 상태입니다. 확인 부탁드립니다 12시10분에 배출 명령한제품이 아직도 배출되지 않고 있습니다. 차량 및 인원 대기중이라 빠른 확인 부탁드립니다. July 9, 2025 at 1:23 PM, 배병민 (Bae Byoungmin) : 네 지금 조치중입니다 July 9, 2025 at 1:26 PM, SKOH2/제조-셀,모듈 출하/김병호 : PM님 바쁘신줄 알겠지만 금일 오전부터 완제품 창고 배출이 늦어져 출하 작업이 2시간이상 지연되고 있습니다. 이점 이해해 주시길 바랍니다 July 9, 2025 at 2:33 PM, FA CS AGV Jawad : MCS/RTD can you plz manage pallet for Line 09 EOL July 9, 2025 at 2:39 PM, Shakir (MCS) : The pallet Z103154 for EOL09 which is on the crane of STK13_C02 since for long time, because of port 05 OOS, Pallet not moving to EOL line. @FA please check STK13_P05 Thank you July 9, 2025 at 2:39 PM, FACS_Wooseok Choi : Going July 9, 2025 at 2:43 PM, FACS_Wooseok Choi : Port is clean. July 9, 2025 at 2:44 PM, FACS_Wooseok Choi : Is it going. Thank you July 9, 2025 at 2:47 PM, Shakir (MCS) : Yes, Job completed and next pallet assigned from STK11 and AGVP08 on the way to EOL LINE 9 ✅ Thank you July 9, 2025 at 3:53 PM, 배병민 (Bae Byoungmin) : 현재 확인 결과 2단밴딩 2번 Unit 밴드 접합부 가공품이 파손되어 밴드 파단이 발생하였습니다. 가공스페어는 현재 없는 상태이며, 임시 홀/탭 가공하여 브라켓 설치 진행하겠습니다. 2시간정도 추가 소요될듯합니다 July 9, 2025 at 3:54 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) @유경호(RYU KYEONGHO) July 9, 2025 at 4:08 PM, 유경호(RYU KYEONGHO) : 네. 내일 출하분은 완제품 창고에 확보되어 있으나 금요일 출하분이 포드 약100plt, 현대50plt 부족한 상태입니다. 작업 완료 시 공유 부탁드리겠습니다. July 9, 2025 at 4:33 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS 남측 셀 완제품 창고 GF 아무 알람 없이정지 상태입니다. 확인 부탁드립니다 July 9, 2025 at 4:34 PM, 원승연(Seungyeon Won) : 확인 감사드립니다 July 9, 2025 at 4:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS_team/@Fa Technician/ RTD/MCS South cell warehouse GF It‘s on stay without any alarm. Please check July 9, 2025 at 4:34 PM, SKOH2/제조-셀,모듈 출하/김병호 : 셀트레이 입고 작업중이라 빠른 확인 바랍니다 July 9, 2025 at 4:35 PM, FACS_Wooseok Choi : 네.알겠습니다 July 9, 2025 at 4:46 PM, FACS_Wooseok Choi : This message was deleted. July 9, 2025 at 4:58 PM, FACS_Wooseok Choi : @Shakir (MCS) could you make a destination? M0cnv36_lf01 July 9, 2025 at 4:59 PM, Shakir (MCS) : Sure, checking July 9, 2025 at 5:00 PM, Shakir (MCS) : Already has job to STK35 July 9, 2025 at 5:03 PM, FACS_Wooseok Choi : Now m0cnv036_13,m0cmv36_lf01 job is strange. July 9, 2025 at 5:07 PM, Shakir (MCS) : Now LF01 carrier moved July 9, 2025 at 5:31 PM, FACS_Wooseok Choi : 모니터링 하고 있겠습니다. July 9, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Sarvajcz Ferenc Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— July 9, 2025 at 6:52 PM, 배병민 (Bae Byoungmin) : 박스 포장기 리커버리 완료 후 생산 가동 하였습니다. July 9, 2025 at 9:41 PM, Szentirmai Z. A/SSL : Hello, please move to EOL AGV#9 to the other position. Thank you July 9, 2025 at 9:41 PM, FA/CS/AGV/Taimur : Sending. July 9, 2025 at 9:45 PM, Szentirmai Z. A/SSL : #13 same, please July 9, 2025 at 9:47 PM, FA/CS/AGV/Taimur : Moved. Thank you July 9, 2025 at 10:38 PM, Mohammad Amir : @FA @Csepi Árpád Please check STK013_P05 there is AGV pio interface Error and it is delaying the empty pallet delivery to EOL-10. Please check the issue on priority. Thank you very much! July 9, 2025 at 10:38 PM, FA/CS/AGV/Taimur : Checking already July 9, 2025 at 10:38 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 11:37 PM, Mohammad Amir : @FA Please check STK011_C01 there is Crane saw travel x fault error and server jobs are pending. Thank you very much! July 9, 2025 at 11:38 PM, FACS_Hyeongi Son : Going July 9, 2025 at 11:42 PM, FACS_Hyeongi Son : Solved July 9, 2025 at 11:42 PM, Mohammad Amir : Thank you very much! July 10, 2025 at 2:36 AM July 10, 2025 at 2:36 AM, FACS_Hyeongi Son : @Mohammad Amir Please check the materials going to the box packing machine July 10, 2025 at 2:36 AM, Mohammad Amir : Sure, checking! July 10, 2025 at 2:37 AM, FACS_Hyeongi Son : M0STK012->F0BPM11 July 10, 2025 at 2:37 AM, FACS_Hyeongi Son : I just made one manually from ACS July 10, 2025 at 2:42 AM, Mohammad Amir : Currently there are three jobs exists for box packing and all three materials inside the STK012 at the moment. And there was a carrier Z102989 located at STK012_P10 ,for this carrier source and destination both were same hence it was not moving and blocking the way. I have resolved the issue ✅. Soon , materials flow should be normal to box packing. I am monitoring. Thank you very much! July 10, 2025 at 2:43 AM, FACS_TaehyeongJin : @mcs Cell buffer module agv11 job cancel plz Agv3 have z102989 July 10, 2025 at 2:44 AM, Mohammad Amir : Sure, checking! July 10, 2025 at 2:44 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! July 10, 2025 at 2:45 AM, Szentirmai Z. A/SSL : Thank you! July 10, 2025 at 2:46 AM, Mohammad Amir : You are welcome! July 10, 2025 at 2:48 AM, FACS_Hyeongi Son : Can you check Z102989 going to F0BPM011_P02 ? July 10, 2025 at 2:51 AM, Mohammad Amir : Currently this carrier has no job. It had a job to F0BPM011_P02 but it was terminated at 1:48. And afterwards wrong job was created from STK012_P10 to P10 that's why it didn't move. Now at 2:41 this carrier is manually removed from STK012_P10. Thank you very much! July 10, 2025 at 2:53 AM, FACS_Hyeongi Son : The carrier is in Unit 3 now Send this to F0BPM011_P02 July 10, 2025 at 2:53 AM, Mohammad Amir : Update :- For Box packing (F0BPM011_P02) AGV#5 on the way with pallet ✅. Afterwards there are two more pallets in the queue. Thank you very much! July 10, 2025 at 2:55 AM, Mohammad Amir : Unfortunately I don't have permission to send the pallet to process machine. Please write me correct location and I will update it and afterwards send this pallet back to warehouse. And afterwards it will follow the automation process. Thank you very much! July 10, 2025 at 2:57 AM, Mohammad Amir : Is this pallet already inside the STK? Thank you very much! July 10, 2025 at 2:57 AM, FACS_TaehyeongJin : Not inside Still on the agv3 July 10, 2025 at 2:58 AM, Mohammad Amir : So, Please confirm is it on AGV#3(MOMGV012_VC03)? Thank you very much! July 10, 2025 at 2:58 AM, FACS_TaehyeongJin : Yes July 10, 2025 at 2:59 AM, Mohammad Amir : Sure, I am working on this issue. July 10, 2025 at 3:00 AM, FACS_TaehyeongJin : Z102989 In packing machine now July 10, 2025 at 3:00 AM, FA/CS/AGV/Taimur : Its fine. The pallet Z102989 has been unloaded to UNBX M/C July 10, 2025 at 3:01 AM, Mohammad Amir : Okay! Thank you very much! July 10, 2025 at 4:23 AM, FA/CS/AGV/Taimur : @Mohammad Amir can you please sent the carrier: T704506 on AGV: 04 in GF_CELL_BUFFER module. The line is paused for cleaning. The AGV battery is depleting. Thank you July 10, 2025 at 4:24 AM, Mohammad Amir : Sure, checking! July 10, 2025 at 4:26 AM, Mohammad Amir : Could you please cancel the job from ACS first. Job cancellation from MCS is getting failed. Thank you very much! July 10, 2025 at 4:27 AM, FA/CS/AGV/Taimur : Can you try now? July 10, 2025 at 4:29 AM, Mohammad Amir : Job has been created successfully to send the carrier back to source warehouse ✅. AGV#4 has started to move. I am monitoring for smooth delivery. Thank you very much! July 10, 2025 at 6:09 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.10. 9+0/12+1 Tech, 0Sl, 1Sup. Overtime(1): Harasztia Zoltán Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(0): Shift Change(0): --------------- Electrode(4): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, TakácsÁdám, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Pintye Miklós --------------- Form/Modul( July 10, 2025 at 8:40 AM, Nikolett SL/B EOL : Sziasztok tudna valaki menni a Boxpackingra ? Köszönöm July 10, 2025 at 8:40 AM, Zoltán Harasztia FA : Szia itt vagyok. Mi a probléma? July 10, 2025 at 2:17 PM, Fehérvári Géza SL/B : Sziasztok Eolon a 17 AGV útban van legyetek szíves elküldeni. Köszönöm July 10, 2025 at 2:18 PM, FA/CS/AGV_ Asjad : Sure July 10, 2025 at 2:18 PM, Gerbovits Kevin : Megyünk July 10, 2025 at 2:19 PM, FA/CS/AGV_ Asjad : Done July 10, 2025 at 3:43 PM, Nikolett SL/B EOL : Sziasztok a kicsomagolo a Boxpackingnal nem jó Vákuum problema July 10, 2025 at 3:44 PM, Gerbovits Kevin : Megyek July 10, 2025 at 3:57 PM, Gerbovits Kevin : Kész July 10, 2025 at 5:41 PM, FACS_Youngmin LEE : ■ 10th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 10, 2025 at 8:46 PM, Szabolcs : M0STK035 crane problem. Check please. July 10, 2025 at 9:09 PM, Csepi Árpád : Solved July 10, 2025 at 9:53 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 21:52 -End : 5. Remark(special note) : - July 10, 2025 at 10:02 PM, FACS_Youngmin LEE : This message was deleted. July 10, 2025 at 10:03 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 4.Work time -Start : 21:52 -End : 22:01 5. Remark(special note) : - 1열 2행 6단 조치:플러그 탈거 후 재연결 결과:EMS 컨트롤 시스템 화면 정상 July 10, 2025 at 10:07 PM, FACS_Youngmin LEE : ■화재 오알람으로 인한 에러발생 July 10, 2025 at 10:21 PM, 한상범(Han Sang Beom) : The AGVs aren't moving. Ejection pallets are awaiting AGV movement. Please check @FA July 10, 2025 at 10:23 PM, Szentirmai Z. A/SSL : Cell doesn't bring empty pallets to the packing machines either July 10, 2025 at 10:23 PM, Szentirmai Z. A/SSL : @FA/CS/AGV/Taimur July 10, 2025 at 10:24 PM, FA/CS/AGV/Taimur : Yes checking. July 10, 2025 at 10:36 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.10 2.Machine name : -GF EOL LINE 3. Action detail : -현재 GF EOL라인 ACS PLC가 디스커넥티드 상태로 AGV통신불가 합니다. 원인 찾고 있습니다. 지게차 수동투입 바랍니다. 4.Work time -Start : 22:36 -End : 5. Remark(special note) : - July 10, 2025 at 10:37 PM, 문혁기(moon hyeok ki) : EOL 1 line discharge pallet is not being discharged, please check AGV July 10, 2025 at 10:38 PM, FA/CS/AGV/Taimur : Hi all, There seem to be ACS server disconnection in EOL GF line. The ACS IS not responding ongoing job as well. Whenever we try to create a new job it is giving connection to the server problem. We are trying to resolve it. Thank you July 10, 2025 at 10:50 PM, 배병민 (Bae Byoungmin) : 대응중입니다. 점검 후 공유드리겠습니다 July 10, 2025 at 11:02 PM, FA/CS/AGV/Taimur : >>Update The server connection has been retrieved. EOL ACS operation is back to normal. Thank you for your patience. July 10, 2025 at 11:03 PM, 배병민 (Bae Byoungmin) : @VK (mcs) Action has been taken. Please check if there is a problem with the command. July 10, 2025 at 11:05 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE ACS job 정상적으로 반송되고있는지 모니터링후 보고 바랍니다 July 10, 2025 at 11:07 PM, 배병민 (Bae Byoungmin) : @한상범(Han Sang Beom) 조장님 ACS 문제는 해결되어 AGV 정상 진행하면서 모니터링 해보겠습니다 July 10, 2025 at 11:07 PM, VK (mcs) : Some jobs have been terminated. I will create transfer command for them. July 10, 2025 at 11:09 PM, 한상범(Han Sang Beom) : 네 알겠습니다. July 10, 2025 at 11:10 PM, 한상범(Han Sang Beom) : 수동으로 파레트 배출해야하는 라인들이있습니다. AGV 이동 지원 부탁드립니다. July 10, 2025 at 11:11 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE @FA/CS/AGV/Taimur 지원 바로 해주세요 July 10, 2025 at 11:14 PM, VK (mcs) : For all carriers that jobs terminated, I created transfer command to the STK again. Thx July 10, 2025 at 11:16 PM, 배병민 (Bae Byoungmin) : @FACS_Youngmin LEE 매니져님 EOL 공팔레트 투입 누락구간 없는지 더블체크 부탁합니다. July 10, 2025 at 11:26 PM, FA/CS/AGV/Taimur : @VK (mcs) please delete the job for carrier: R000347 as it has been taking out manually. GF_EOL line. July 10, 2025 at 11:28 PM, FA/CS/AGV/Taimur : From F4CPM010~ To M0STK011_P06 July 10, 2025 at 11:29 PM, VK (mcs) : Job already cancelled July 10, 2025 at 11:30 PM, FACS_Youngmin LEE : This message was deleted. July 10, 2025 at 11:39 PM, 배병민 (Bae Byoungmin) : @노영일 (Yeongil Noh) 금일 야간 EOL 자동화 반송 이슈건은 조치는 되었습니다. 최근 동일 이슈로 생산에 차질을드려 죄송합니다. 원인 분석중에 있으며, 재발 방지 대책 정리하여 메일 드리겠습니다. - 현상 ㄴ ACS 오류로 인한 설비 다운 발생 - 원인 ㄴ 최근 동일 이슈 2회 발생으로 로그 분석 및 원인 파악중 - 조치 ㄴ ACS 시스템 재부팅 이후 정상화 July 11, 2025 at 12:06 AM July 11, 2025 at 12:06 AM, FA/CS/AGV/Taimur : @VK (mcs) Can you please return the carrier: R000307 back to origin stocker as the EOL: 04 is not operating at the moment. Carrier is loaded on AGV: 08. Thanks July 11, 2025 at 12:07 AM, VK (mcs) : Checking July 11, 2025 at 12:09 AM, VK (mcs) : Please cancel it first from ACS, then I will transfer it. July 11, 2025 at 12:10 AM, FA/CS/AGV/Taimur : Can you try now. Thank you July 11, 2025 at 12:12 AM, VK (mcs) : Job created July 11, 2025 at 2:39 AM, 한상범(Han Sang Beom) : Please move to AGV #8. @FA July 11, 2025 at 2:39 AM, FA/CS/AGV/Taimur : Sure July 11, 2025 at 5:48 AM, FACS_Youngmin LEE : 25.07.10(목)-25.07.11(금) SK OH2 Module Night Shift CS Action Details 1.Machine name : M0STK21 2.Action detail : 크레인 파레트 적재상태로 무언정지-> 메뉴얼 커멘드로 파레트 적하 3. Remark(special note) -x 1.Machine name : M0STK36 CV13 2.Action detail : 데이터 미스매치 3. Remark(special note) -OP내에서 데이터 삭제 불가 [블랭크 카피->무브먼트X] PLC 이용하여 데이터 삭제 1.Machine name : M0STK14 2.Action detail : 화재연기감지 에러 1열 2행 6단 플러그 탈거 후 재결합 3. Remark(special note) -x 1.Machine name : EOL 2.Action detail : ACS Cell_Buffer_AGV01 PLC 디스커넥트 배PM님과 통화 July 11, 2025 at 6:09 AM, Tóth Gyula : Sziasztok MOCNV036_M02 Megállt a cella kiszedés Elakadt a liftnèl a paletta... July 11, 2025 at 6:18 AM, Balázs Róbert SL : Please help Line1 TR Lwr loading port. July 11, 2025 at 6:37 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.11 2.Machine name : -M0CNV36_RTV 3. Action detail : -RTV 정위치 불량 및 RTV내 화물 위치 불량 -현지 테크니션과 같이 조치 진행 중 4.Work time -Start : 06:30 -End : 5. Remark(special note) : July 11, 2025 at 7:26 AM, SKOH2/제조-셀,모듈 출하/김병호 : 모듈 원자재 창고쪽 작업 중이신건걸까요??? July 11, 2025 at 7:27 AM, FACS_오창훈_CHANGHOON : 네 RTV 문제로 작업 중입니다 July 11, 2025 at 7:30 AM, SKOH2/제조-셀,모듈 출하/김병호 : 금일 8시 출하분 배출 작업 중인데 작업이 오래 걸리실까요? July 11, 2025 at 7:35 AM, FACS_오창훈_CHANGHOON : 현재 RTV 화물 수동 배출하고 RTV 교체 작업 진행하겠습니다 July 11, 2025 at 7:39 AM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다. 출하 작업이 지연될거 같아 일단 보고 하겠습니다. 교체후 재 기동까지 얼마니 걸릴까요? July 11, 2025 at 9:14 AM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingre . Vacuum hiba van July 11, 2025 at 9:14 AM, Döme György F.A : Megyek July 11, 2025 at 9:35 AM, Döme György F.A : Kész.Átállítottuk a top cover-t kézi leszedésre. July 11, 2025 at 10:25 AM, R. József C SL EOL : Please check the cellbuffer#2 Thanks July 11, 2025 at 10:29 AM, Zoltán Harasztia FA : Kész July 11, 2025 at 10:32 AM, R. József C SL EOL : Köszönöm July 11, 2025 at 10:49 AM, R. József C SL EOL : Gyertek kérlek boxpacking kicsomagoló elejére July 11, 2025 at 10:49 AM, Zoltán Harasztia FA : Indulunk July 11, 2025 at 1:08 PM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingre. Vákuum probléma July 11, 2025 at 1:11 PM, Zoltán Harasztia FA : Megyünk July 11, 2025 at 2:10 PM, Szabolcs : @FACS team @FA tech @MTS/RTD M0STK034,35 bank RTV not moving. Check please. July 11, 2025 at 2:14 PM, FACS_오창훈_CHANGHOON : Solved July 11, 2025 at 2:48 PM, FACS_오창훈_CHANGHOON : @SKOH2/제조-셀,모듈 출하/김병호 남측 출하쪽 컨베이어 설비 조정으로 30분 비가동 예정입니다. 혹시 출하 작업 있으시면 연락 부탁 드립니다. July 11, 2025 at 2:49 PM, SKOH2/제조-셀,모듈 출하/김병호 : 네 알겠습니다 . 금일 출하 제품은 배출 완료하였으나, 셀트레이 입고가 남아있어 입고 작업전 알림 드리겠습니다 July 11, 2025 at 3:01 PM, FACS_오창훈_CHANGHOON : 네 감사합니다. 작업 종료 되었고 CNV36 정상 상황입니다. July 11, 2025 at 4:00 PM, R. József C SL EOL : Boxpackingra gyertek kérlek, topcover probléma July 11, 2025 at 4:01 PM, Döme György F.A : Mindjárt megyünk July 11, 2025 at 5:55 PM, Éváné Bori Viktória : Helló! AGV 13 ACS alive alarm check please July 11, 2025 at 5:55 PM, FA/CS/AGV/Taimur : Checking July 11, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0):- Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 11, 2025 at 9:21 PM, Czébely Dániel SL—D : @Dávid F.A. @N.Gábor F.A. Sziasztok probléma adódott a dupla pántolónál a box packingon id tudnátok jönni ? July 11, 2025 at 9:24 PM, N.Gábor F.A. : @FACS_Youngmin LEE Hello Could you come to 2F banding machine? Need a plc July 11, 2025 at 9:27 PM, Czébely Dániel SL—D : @유경호(RYU KYEONGHO) The rotating platform of the box packing LvL2 strapping machine does not return to its original position, the program did not handle the task well. July 11, 2025 at 9:28 PM, N.Gábor F.A. : Correction Box packing lvl2 banding machine July 11, 2025 at 9:28 PM, Czébely Dániel SL—D : Drop-off time: 9:15 PM - July 11, 2025 at 9:42 PM, FACS_Youngmin LEE : solved July 11, 2025 at 11:25 PM, Czébely Dániel SL—D : AGV 6 problem box packing. July 11, 2025 at 11:25 PM, FA/CS/AGV/Taimur : Checking July 12, 2025 at 1:12 AM July 12, 2025 at 1:12 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Sziasztok rá tudnátok nézni a box packingr a servo probléma. July 12, 2025 at 1:19 AM, Dávid F.A. : Solved July 12, 2025 at 1:20 AM, Dávid F.A. : @FA/CS/AGV/Taimur EP AGV#11 #15 prob July 12, 2025 at 1:21 AM, FA/CS/AGV/Taimur : Checking July 12, 2025 at 1:21 AM, N.Gábor F.A. : 11 solved 15 has a traction stall detect error July 12, 2025 at 1:56 AM, Őri Imre : AGV 11 ACS Alive hibával áll a 3 sor végén! Meg tudja vaki nézni July 12, 2025 at 1:57 AM, FA/CS/AGV/Taimur : Checking July 12, 2025 at 2:03 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. Hellóka jelenleg egy olyan problémánk van hogy a palleta nem megy tovább semien úton módon. Nincs hiba ! De a gép nem megy! July 12, 2025 at 2:17 AM, FACS_Youngmin LEE : solved July 12, 2025 at 5:11 AM, Czébely Dániel SL—D : Sziasztok a 05:00-kor a LvL 1 -es pártoló 1-es oldalán úgy döntött hogy megadja magát. July 12, 2025 at 5:11 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. July 12, 2025 at 5:12 AM, Czébely Dániel SL—D : Nem foraszt rendesen és forrasztás után nem engedi el a pántott July 12, 2025 at 5:14 AM, Czébely Dániel SL—D : @유경호(RYU KYEONGHO) In the box packing LVL 1-supporting position, the 1-supporting head does not solder properly and does not release the point after soldering or continuously breaks. July 12, 2025 at 5:14 AM, Czébely Dániel SL—D : The production line is running with the error from 04:45 July 12, 2025 at 5:16 AM, Czébely Dániel SL—D : @유경호(RYU KYEONGHO) and strapping tape was also replaced on both LvL 1 and LvL 2 strapping, this also took 30 minutes in total July 12, 2025 at 5:19 AM, Czébely Dániel SL—D : @유경호(RYU KYEONGHO) And we had 2 MES pallets R201576, Z103166. I initialized these and we returned to box packing July 12, 2025 at 5:38 AM, Czébely Dániel SL—D : Nem lett jobb July 12, 2025 at 5:38 AM, Czébely Dániel SL—D : 🤣🤣 July 12, 2025 at 5:47 AM, N.Gábor F.A. : Mindjárt érkezik a váltás és ránéznek July 12, 2025 at 5:50 AM, FACS_Wooseok Choi : ■12th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Choi wooseok July 12, 2025 at 5:55 AM, Döme György F.A : Mindjárt megyünk July 12, 2025 at 5:56 AM, R. József C SL EOL : Köszönöm July 12, 2025 at 6:01 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(3) Gégény Dávid Győri József Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 12, 2025 at 6:25 AM, FACS_Wooseok Choi : SK OH2 Module CS Action Details 1.Date : 25.07.12 2.Machine name : -Banding machine 3. Action detail : -밴딩 실패 -현지 테크니션과 같이 조치 진행 중 4.Work time -Start : 06:25 -End : 5. Remark(special note) : July 12, 2025 at 6:40 AM, FACS_Wooseok Choi : 조치완료 했습니다. July 12, 2025 at 6:41 AM, Zoltán Harasztia FA : Kész July 12, 2025 at 12:09 PM, R. József C SL EOL : Eoln9-10 között útban van az agv Kérlek küldjétek el July 12, 2025 at 12:09 PM, FA CS AGV Jawad : I do July 12, 2025 at 12:14 PM, FA CS AGV Jawad : Plz check Inboxing line OUTPORT, a pallet has stuck there in middle of conveyer July 12, 2025 at 12:14 PM, Zoltán Harasztia FA : Cheking July 12, 2025 at 12:15 PM, FA CS AGV Jawad : Thanks July 12, 2025 at 12:15 PM, R. József C SL EOL : #6 agv July 12, 2025 at 12:16 PM, FA CS AGV Jawad : I move it... July 12, 2025 at 12:19 PM, R. József C SL EOL : Thanks July 12, 2025 at 12:19 PM, R. József C SL EOL : Boxpackingra szeretnék kérni segítséget July 12, 2025 at 12:23 PM, R. József C SL EOL : Ismét, most a 10-es agv July 12, 2025 at 12:24 PM, Zoltán Harasztia FA : Solved July 12, 2025 at 12:26 PM, FA CS AGV Jawad : I do July 12, 2025 at 12:28 PM, R. József C SL EOL : Thanks July 12, 2025 at 1:20 PM, R. József C SL EOL : Boxpackingon a 4 oldalas Nyomtatót meg tudnátok nézni? Nyomtatás közben valamiért elakad és nem küldi ki a címkét teljesen ami vákuum hibát generál July 12, 2025 at 1:21 PM, Döme György F.A : Megyünk July 12, 2025 at 1:23 PM, R. József C SL EOL : Köszönöm Koreai kolléga már itt van, srácok ki mentek közben kaja szünetre July 12, 2025 at 2:38 PM, FACS_오창훈_CHANGHOON : @Duna Don Module line 1 end product agv #2 workdata err chk plz July 12, 2025 at 2:39 PM, FA CS AGV Jawad : I am on my way July 12, 2025 at 2:42 PM, FA CS AGV Jawad : Done July 12, 2025 at 3:47 PM, R. József C SL EOL : Please check the cellbuffer #2 Double cargo detected July 12, 2025 at 3:55 PM, Döme György F.A : Solved July 12, 2025 at 3:55 PM, R. József C SL EOL : Köszönöm July 12, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (0): - Holiday (1): Kovács Szabolcs Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(4): GF: Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 12, 2025 at 8:17 PM, FACS_Youngmin LEE : ■ 12th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 12, 2025 at 8:30 PM, Mohammad Amir : Dear @All, For your information:- You are not receiving empty pallet for EOL-2 because there is no request for empty pallet delivery. Currently we have 876 empty pallet available for EOL-2. Please let me know ,is there no production on EOL-2? Thank you very much! July 12, 2025 at 9:02 PM, Szijjártó Balázs : Hi! AGV isn't coming to Line 1 for the modules. Please help! Thanks! July 12, 2025 at 9:03 PM, Mohammad Amir : Hello, Checking! July 12, 2025 at 9:06 PM, Mohammad Amir : Good evening, If you are referring to Module line -1_P01, Than for this port issue has been resolved ✅ Cell pallet T704493 is on the way. Please let me know if you need further assistance. Thank you very much! July 12, 2025 at 9:09 PM, Mohammad Amir : For Module line -1_P03, There is no request for materials delivery. Please press LR if you need materials there. Thank you very much! July 12, 2025 at 9:13 PM, Mohammad Amir : Update:- For Module line-1_P01, AGV#5 on the way with Empty pallet ✅. Thank you very much! July 12, 2025 at 9:14 PM, Dávid F.A. : This message was deleted. July 12, 2025 at 9:50 PM, Mohammad Amir : Dear @Dávid F.A. Could you please give confirmation on this . Thank you very much! July 12, 2025 at 9:57 PM, Dávid F.A. : Currently in manual mode EOL Line#02! July 12, 2025 at 9:57 PM, Mohammad Amir : Thank you very much for the confirmation! July 13, 2025 at 2:31 AM July 13, 2025 at 2:31 AM, Mohammad Amir : @FA @Dávid F.A. Kindly check M0STK013_C01 Crane ankle left detect error Thanks you very much! July 13, 2025 at 2:33 AM, N.Gábor F.A. : Solved July 13, 2025 at 2:34 AM, Mohammad Amir : Thank you very much! July 13, 2025 at 4:34 AM, Czébely Dániel SL—D : Sziasztok tudtok menni box packingra megint a nyomtatóval van gond July 13, 2025 at 4:34 AM, Czébely Dániel SL—D : @N.Gábor F.A. @Dávid F.A. July 13, 2025 at 5:39 AM, FACS_Wooseok Choi : ■13th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Choi wooseok July 13, 2025 at 6:00 AM, R. József C SL EOL : Sziasztok Boxpackingon 4oldalas címke Nyomtató megint problémázik, koreai kolléga már itt, nézzétek meg kérlek July 13, 2025 at 7:42 AM, FACS_오창훈_CHANGHOON : ■13th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Oh Changhoon July 13, 2025 at 9:21 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.12 2.Machine name : -M0STK35 3. Action detail : -FORK SENSOR CHECK 4.Work time -Start : 09:20 -End : 5. Remark(special note) : 센서 점검 작업 30분 진행 예정입니다. 반송 작업 시 연락주시면 오토 모드 전환하겠습니다. We will be a sensor check for 30 minutes. If you contact us when returning the product, we will switch to auto mode. July 13, 2025 at 9:34 AM, FACS_오창훈_CHANGHOON : SK OH2 Module CS Action Details 1.Date : 25.07.12 2.Machine name : -M0STK35 3. Action detail : -FORK SENSOR CHECK 4.Work time -Start : 09:20 -End : 09:30 5. Remark(special note) : 센서 점검 작업 완료 되었습니다. July 13, 2025 at 12:45 PM, FA CS AGV Jawad : Can someone plz check unboxing line, there is olu03 work detect error. July 13, 2025 at 12:46 PM, FA CS AGV Jawad : @Zoltán Harasztia FA July 13, 2025 at 12:46 PM, Zoltán Harasztia FA : Coming July 13, 2025 at 12:47 PM, FA CS AGV Jawad : This message was deleted. July 13, 2025 at 12:47 PM, FA CS AGV Jawad : Thanks July 13, 2025 at 12:48 PM, R. József C SL EOL : Kész July 13, 2025 at 12:49 PM, FA CS AGV Jawad : Its fixed Thanks July 13, 2025 at 12:49 PM, R. József C SL EOL : me too July 13, 2025 at 12:50 PM, R. József C SL EOL : Szimpla adatcsúszás volt, agv-n adat és paletta, kicsomagolón adat volt de paletta nem July 13, 2025 at 1:32 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check cell buffer M0STK011 error. Thank you . July 13, 2025 at 1:34 PM, Döme György F.A : Checking July 13, 2025 at 1:37 PM, Döme György F.A : Solved July 13, 2025 at 3:07 PM, R. József C SL EOL : Eol 7-8 között útban az agv #14 Küldjétek el kérlek July 13, 2025 at 3:08 PM, R. József C SL EOL : 2 palettát vinnénk be a sorok közé July 13, 2025 at 3:08 PM, FA CS AGV Jawad : I do July 13, 2025 at 3:08 PM, R. József C SL EOL : Köszönöm July 13, 2025 at 5:18 PM, FACS_오창훈_CHANGHOON : @Mohammad Amir Could you change the information of STK 13, pallet 0101709 UNKDBS to Z102633? July 13, 2025 at 5:21 PM, Shahbaz 샤바즈 MCS/RTD : Sorry, it can’t be changed. It needs to be taken out manually and racked in again. Thank you. July 13, 2025 at 5:23 PM, FACS_오창훈_CHANGHOON : Thank you. I tried the method you recommended, but the command didn’t go through. I’ll give it another try. July 13, 2025 at 5:38 PM, FACS_Youngmin LEE : ■ 13th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 13, 2025 at 5:59 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0): - Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kasztel Balázs, Kovács Szabika Modul(2): Nagy Gábor, Martina Dávid July 13, 2025 at 6:16 PM, Éváné Bori Viktória : Sziasztok! GF buffer 1 SMC1 SEW travel X fault hibajelzés. Kérlek nézzétek meg July 13, 2025 at 6:41 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 July 13, 2025 at 6:45 PM, Dávid F.A. : Solved July 13, 2025 at 6:57 PM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 SEW travel x fault July 13, 2025 at 7:15 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.13 2.Machine name : -M0STK011 3. Action detail : -스테커 크레인 센서 점검 4.Work time -Start : 19:15 -End : 5. Remark(special note) : - X July 13, 2025 at 7:24 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.13 2.Machine name : -M0STK011 3. Action detail : -스테커 크레인 센서 점검 4.Work time -Start : 19:15 -End : 19:24 5. Remark(special note) : - 레일 및 광센서 클리닝 July 13, 2025 at 7:34 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.13 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 -오알람으로 인한 에러 발생 4.Work time -Start : 19:34 -End : 5. Remark(special note) : - July 13, 2025 at 7:44 PM, FACS_Youngmin LEE : SK OH2 Module CS Action Details 1.Date : 25.07.13 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 -오알람으로 인한 에러 발생 4.Work time -Start : 19:34 -End : 19:44 5. Remark(special note) : - 1열 2행 6단 플러그 탈거 후 재결합 July 13, 2025 at 8:51 PM, 요셉 : EOL agv#14 check plz Slam error July 13, 2025 at 8:51 PM, FA-CS-AGV-Masoud : Coming July 13, 2025 at 8:54 PM, FA-CS-AGV-Masoud : Solved July 13, 2025 at 10:16 PM, Éváné Bori Viktória : Sziasztok! Az első címke nyomtatóval probléma van. Nézzétek meg kérlek! @N.Gábor F.A. @Dávid F.A. July 13, 2025 at 11:18 PM, 김대은 : Please move to AGV #10 July 13, 2025 at 11:19 PM, FA-CS-AGV-Masoud : Sure July 13, 2025 at 11:23 PM, 김대은 : Please move to AGV #6 July 13, 2025 at 11:23 PM, FA-CS-AGV-Masoud : Sure July 14, 2025 at 12:17 AM July 14, 2025 at 12:17 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0STK011_P05 SEW travel x fault July 14, 2025 at 12:19 AM, Dávid F.A. : Solved July 14, 2025 at 12:22 AM, Dávid F.A. : @FA-CS-AGV-Masoud EP AGV#11 problem! July 14, 2025 at 12:23 AM, FA-CS-AGV-Masoud : On the way July 14, 2025 at 12:25 AM, FA-CS-AGV-Masoud : Port is full July 14, 2025 at 12:26 AM, Dávid F.A. : Thanks for the information! July 14, 2025 at 12:40 AM, Őri Imre : AGV 14 a magas raktárnál a kiadagolásnál áll! Utána mer vagy 4 AGV várakozik. July 14, 2025 at 12:41 AM, FA-CS-AGV-Masoud : Coming July 14, 2025 at 12:41 AM, Őri Imre : Emiatt nem jött üres dunnage a 3 as sorra July 14, 2025 at 12:44 AM, Mohammad Amir : Checking July 14, 2025 at 12:44 AM, FA-CS-AGV-Masoud : @N.Gábor F.A. Please check M0CNV032 port cannot receive the material from the AGV July 14, 2025 at 12:45 AM, Mohammad Amir : This message was deleted. July 14, 2025 at 12:49 AM, N.Gábor F.A. : Solved July 14, 2025 at 12:49 AM, Mohammad Amir : AGV#6 on the way with empty dunnage ✅. Thank you very much! July 14, 2025 at 12:51 AM, Dávid F.A. : @Mohammad Amir Have a good evening! Thank you for the information. July 14, 2025 at 1:00 AM, Mohammad Amir : You are most welcome! Have a good rest of the night! July 14, 2025 at 2:27 AM, Éváné Bori Viktória : Sziasztok! Megint 0 papírt nyom a box packingon a gép! @Dávid F.A. , @N.Gábor F.A. July 14, 2025 at 2:38 AM, Dávid F.A. : Solved July 14, 2025 at 3:05 AM, Czébely Dániel SL—D : @Dávid F.A. @N.Gábor F.A. Sziasztok a box packingon a cimkétő 0-ás címkét nyomtatott rá tudnátok nézni ? July 14, 2025 at 3:15 AM, N.Gábor F.A. : Solved July 14, 2025 at 5:53 AM, FACS_Bareum kim : ■14th July Ivancsa FA CS - Withes service Day(06:00 - 16:00) Kim Bareum July 14, 2025 at 6:35 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 14, 2025 at 9:08 AM, Szabolcs : @FA M0CNV036_P13_BP01 problem. Check please. July 14, 2025 at 9:18 AM, Édl Tamás : Solved July 14, 2025 at 11:58 AM, FA CS AGV Jawad : @MCS/RTD can you plz confirm the position of this pallet T702190 ? July 14, 2025 at 11:58 AM, Shakir (MCS) : Working on it Thank you July 14, 2025 at 11:59 AM, FA CS AGV Jawad : Is it STK-13 P04..? July 14, 2025 at 12:00 PM, FA CS AGV Jawad : T702196 this is right ID... July 14, 2025 at 12:03 PM, Sazzad Bhai SKon : Yes this is right. M0STK013_P04 July 14, 2025 at 12:03 PM, Shakir (MCS) : Yes July 14, 2025 at 12:03 PM, FA CS AGV Jawad : Good thanks.. 🙏 July 14, 2025 at 12:03 PM, Shakir (MCS) : Sorry for delay busy with other task July 14, 2025 at 12:04 PM, FA CS AGV Jawad : Have a good day July 14, 2025 at 1:08 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#013 3. Action detail : - Light Mute program Upadete 4.Work time -Start : 13:07 -End : 5. Remark(special note) : - July 14, 2025 at 1:23 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#013 3. Action detail : - Light Mute program Upadete 4.Work time -Start : 13:07 -End : 13:22 5. Remark(special note) : - Auto-learning. Monitoring. July 14, 2025 at 1:42 PM, FACS_Wooseok Choi : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK035 3. Action detail : -F578 관련 점검 4.Work time -Start : 13:41 -End : 5. Remark(special note) : July 14, 2025 at 1:51 PM, FACS_Wooseok Choi : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK035 3. Action detail : -F578 관련 점검 4.Work time -Start : 13:41 -End : 13:50 5. Remark(special note) : 정상 동작, 모니터링. July 14, 2025 at 2:25 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#014 3. Action detail : - Light Mute program Upadete 4.Work time -Start : 14:25 -End : 5. Remark(special note) : - Auto-learning. Monitoring. July 14, 2025 at 2:45 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#014 3. Action detail : - Light Mute program Upadete 4.Work time -Start : 14:25 -End : 14:35 5. Remark(special note) : - Auto-learning. Monitoring. July 14, 2025 at 3:11 PM, FACS_Wooseok Choi : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#014 3. Action detail : - SMC#1 disconnected 4.Work time -Start : 15:10 -End : 5. Remark(special note) : July 14, 2025 at 3:43 PM, Magosi Erik : @Shakir (MCS) Good afternoon Sir! Can You check why cell plt not coming to M3MFA300 p01? Thank You July 14, 2025 at 3:44 PM, Shakir (MCS) : Good afternoon Checking July 14, 2025 at 3:46 PM, Shakir (MCS) : Pallet not coming because STK014 is OOS, FA team working on it. Job already exists for P01. Thank you July 14, 2025 at 3:51 PM, Magosi Erik : Thank You Sir July 14, 2025 at 3:58 PM, Shakir (MCS) : Now AGV07 on the way to M3MFA300_P01 ✅ Thank you July 14, 2025 at 3:58 PM, Magosi Erik : Vers nice. Thank You July 14, 2025 at 3:58 PM, Shakir (MCS) : You’re welcome July 14, 2025 at 3:58 PM, Magosi Erik : *y July 14, 2025 at 4:12 PM, FACS_Wooseok Choi : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK#014 3. Action detail : - SMC#1 disconnected 4.Work time -Start : 15:10 -End : 16: 10 5. Remark(special note) : July 14, 2025 at 5:55 PM, FACS_TaehyeongJin : ■ 14th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 14, 2025 at 8:46 PM, Vadász Dóra SSL/B : Sziasztok #16-os agv feladta. Kérem bírjátok mozgásra. Köszönöm July 14, 2025 at 8:47 PM, FA-CS-AGV-Masoud : Coming July 14, 2025 at 8:51 PM, FA-CS-AGV-Masoud : Solved July 14, 2025 at 10:12 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK031_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:11 -End : 5. Remark(special note) : - July 14, 2025 at 10:34 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK031_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:11 -End : 22:34 5. Remark(special note) : -X July 14, 2025 at 10:37 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK032_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:37 -End : 5. Remark(special note) : - July 14, 2025 at 10:54 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK032_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:37 -End : 22:54 5. Remark(special note) : -X July 14, 2025 at 10:55 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK033_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:55 -End : 5. Remark(special note) : - July 14, 2025 at 11:10 PM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.14 2.Machine name : -M0STK033_M01_OP01 3. Action detail : -메뉴얼 포트 스토퍼 설치 4.Work time -Start : 22:55 -End : 23:10 5. Remark(special note) : -X July 14, 2025 at 11:52 PM, 김대은 : Please check to AGV 18 July 14, 2025 at 11:52 PM, FA-CS-AGV-Masoud : Coming July 14, 2025 at 11:53 PM, FA-CS-AGV-Masoud : Solved July 15, 2025 at 12:07 AM July 15, 2025 at 12:07 AM, Vadász Dóra SSL/B : Sziasztok #14-es agv megállt az út közepén. Kérem nézzétek meg Köszönöm July 15, 2025 at 12:08 AM, FA-CS-AGV-Masoud : Coming July 15, 2025 at 12:11 AM, FA-CS-AGV-Masoud : Solved July 15, 2025 at 3:41 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:40 -End : 5. Remark(special note) : - July 15, 2025 at 4:04 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:40 -End : 04:03 5. Remark(special note) : - 1열7행6단 케이블 접촉 불량 -> 재결합 July 15, 2025 at 5:45 AM, FACS_Bareum kim : ■15th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Kim bareum July 15, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 15, 2025 at 7:41 AM, FACS_Wooseok Choi : ■15th July Ivancsa FA CS - Withes service Morning(08:00 - 18:00) Choi wooseok July 15, 2025 at 8:03 AM, FACS_JaewonShin : ■15th July Ivancsa FA CS - Withes service Daily(08:00 - 18:00) Jaewon shin July 15, 2025 at 8:44 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS 남측 셀 완제품 창고 GF 리프트 정지 상태 입니다 확인 부탁드립니다. July 15, 2025 at 8:45 AM, SKOH2/제조-셀,모듈 출하/김병호 : @FACS/@Fa Technician/RTD/MCS South cell warehouse GF The lift is in a suspended state Please check. 포 July 15, 2025 at 8:46 AM, FACS_JaewonShin : 현장 가는중입니다 July 15, 2025 at 10:04 AM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : - M0STK014 3. Action detail : - PLC Update 4.Work time -Start : 10:04 -End : 5. Remark(specialote) : -x July 15, 2025 at 10:13 AM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : - M0STK014 3. Action detail : - PLC Update 4.Work time -Start : 10:04 -End : 10:13 5. Remark(specialote) : -x July 15, 2025 at 1:37 PM, 한상범(Han Sang Beom) : Please move AGV#12. @FA July 15, 2025 at 1:37 PM, FA/CS/AGV_ Asjad : Coming July 15, 2025 at 1:39 PM, FA/CS/AGV_ Asjad : Done July 15, 2025 at 1:54 PM, FACS_Wooseok Choi : 현재 패킹기에 셀 들어올 때 MES4502번 메세지 뜨면서, 보류 중인 셀들이 들어오고 있습니다(Z103). 확인 부탁드립니다. July 15, 2025 at 1:59 PM, 배병민 (Bae Byoungmin) : 박스 포장기인가요? July 15, 2025 at 1:59 PM, FACS_JaewonShin : 넵 July 15, 2025 at 2:00 PM, FACS_JaewonShin : Z103xxx 번호가 불량 셀로 잡혀있는거같습니다. 박스포장기 쪽으로 올때마다 validation NG로 4502번 mes error띄웁니다 July 15, 2025 at 2:01 PM, 유경호(RYU KYEONGHO) : 몇파레트는 그럴거예요,.박스포장 풀어둿는데..갑자기 보류 잡힌 파레트들입니다. July 15, 2025 at 2:03 PM, 준용 : 셀들이 15일12시58분에 출하보류 스텝으로 잡혓습니다 . July 15, 2025 at 5:05 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : - M0STK014 3. Action detail : - PLC Update 4.Work time -Start : 17:07 -End : 5. Remark(specialote) : -x July 15, 2025 at 5:10 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.15 2.Machine name : - M0STK014 3. Action detail : - PLC Update 4.Work time -Start : 17:07 -End : 17:10 5. Remark(specialote) : -x July 15, 2025 at 5:50 PM, FACS_TaehyeongJin : ■ 15th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 15, 2025 at 6:23 PM, Dániel Hufnágel : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.15. 9 Tech,+3 overtime 1SL Overtime(3): Szabadi Miklós, Kovács Szabolcs, Hufnágel Dániel Holiday(1): Szücs Géza Imre, Sick(1): Czeilinger Krisztián Shift Change(0): --------------- Electrode(4): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (4): Takács Ádám, Böröczki Balázs, Kovács Szabolcs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbe July 16, 2025 at 12:33 AM July 16, 2025 at 12:33 AM, Vadász Dóra SSL/B : Sziasztok Boxon label brc hiba van. Kérem nézzétek meg. Köszönöm July 16, 2025 at 12:33 AM, FACS_Hyeongi Son : Going July 16, 2025 at 12:40 AM, FACS_TaehyeongJin : Solved July 16, 2025 at 12:40 AM, Vadász Dóra SSL/B : Thank you July 16, 2025 at 3:12 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:11 -End : 5. Remark(special note) : - July 16, 2025 at 3:25 AM, FACS_Hyeongi Son : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : -M0STK014 3. Action detail : -화재연기감지기 점검 ->오알람으로 인한 에러 발생 4.Work time -Start : 03:11 -End : 03:21 5. Remark(special note) : - 1열15행6단 케이블 접촉불량 ->재결합 July 16, 2025 at 5:51 AM, FACS_오창훈_CHANGHOON : ■16th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Oh Changhoon July 16, 2025 at 7:08 AM, Mohammad Amir : Good morning @FA, Please check CNV023_P21 ,there is Light curtain error. Thank you very much! July 16, 2025 at 7:09 AM, Zoltán Harasztia FA : Cheking July 16, 2025 at 7:15 AM, Zoltán Harasztia FA : Solved July 16, 2025 at 7:18 AM, Mohammad Amir : Thank you very much! July 16, 2025 at 7:52 AM, FACS_Bareum kim : ■16th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Kim bareum July 16, 2025 at 8:00 AM, FACS_JaewonShin : ■16th July Ivancsa FA CS - Withes service Daily(08:00 - 18:00) Jaewon shin July 16, 2025 at 8:34 AM, MCS/RTD System : @FA Please check STK013 ,it is OOS. Thank you! July 16, 2025 at 11:09 AM, R. József C SL EOL : Sziasztok Gyertek kérlek boxpackingra Probléma van July 16, 2025 at 11:10 AM, Döme György F.A : Mindjárt megyünk July 16, 2025 at 11:30 AM, R. József C SL EOL : Eol7-8 agv útban van #15-ös Kérlek küldjétek el July 16, 2025 at 11:31 AM, FA/CS/AGV_ Asjad : Sure July 16, 2025 at 11:32 AM, FA/CS/AGV_ Asjad : Moved July 16, 2025 at 11:33 AM, R. József C SL EOL : Thank you July 16, 2025 at 11:34 AM, FA/CS/AGV_ Asjad : You’re welcome July 16, 2025 at 12:02 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 7-8 line között küldjétek tovább az AGVt. Szállításban akadályoz July 16, 2025 at 12:02 PM, FA/CS/AGV_ Asjad : Moved July 16, 2025 at 12:20 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 7-8 line között küldjétek tovább az AGVt. Szállításban akadályoz July 16, 2025 at 12:21 PM, Duna Don : Done ✅ July 16, 2025 at 1:16 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : - M0STK#012 3. Action detail : - PLC Update 4.Work time -Start : 13 : 15 -End : 5. Remark(specialote) : -x July 16, 2025 at 1:26 PM, FACS_Bareum kim : SK OH2 Module CS Action Details 1.Date : 25.07.16 2.Machine name : - M0STK#012 3. Action detail : - PLC Update 4.Work time -Start : 13 : 15 -End : 13 : 26 5. Remark(specialote) : -x July 16, 2025 at 1:35 PM, Sási Zsolt SL/C/ EOL : Sziasztok. 7-8 line között küldjétek tovább az AGVt. Szállításban akadályoz July 16, 2025 at 1:35 PM, FA/CS/AGV_ Asjad : Done July 16, 2025 at 2:05 PM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingre. Probléma van July 16, 2025 at 2:08 PM, Döme György F.A : Megyünk July 16, 2025 at 4:42 PM, Herceg Sándor SSL/C : Sziasztok! Segìtséget kérnénk a bixpackingre July 16, 2025 at 5:52 PM, FACS_TaehyeongJin : ■ 16th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 16, 2025 at 6:19 PM, Őri Imre : Üdv! July 16, 2025 at 6:19 PM, Őri Imre : Modul terület kész anyag elszalitasi problémánk van. July 16, 2025 at 6:20 PM, Őri Imre : Illetve üres dunage se jön July 16, 2025 at 6:20 PM, Őri Imre : Köszönöm July 16, 2025 at 6:20 PM, Nagy Mónika : Sziasztok, line4 kitöltèsnèl az AGV-k nem közlekednek. Rànèznètek kérlek? Köszönöm! July 16, 2025 at 6:21 PM, FA/CS/AGV/Taimur : Checking July 16, 2025 at 6:28 PM, FA/CS/AGV/Taimur : AGV: 08 with carrier: T702980 is on the way to line 4. Thank you July 16, 2025 at 6:31 PM, Őri Imre : Kérdés! Meg tudnátok nézni hogy tudunk e lekérni üres papír vagy műanyagos kalodát? Köszönöm! July 16, 2025 at 6:35 PM, Dávid F.A. : There are currently no empty pallets in your warehouse. I checked. July 16, 2025 at 7:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12+1 Overtime (1):Denkó János Sick (0): - Holiday (2): Kasztel Balázs, Kiss Balázs Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kovács Szabika Modul(2): Denkó János, Martina Dávid July 16, 2025 at 7:42 PM, Szijjártó Balázs : Module Line 1, No.2 small AGV: "Lift work data mismatch error" Check please! July 16, 2025 at 7:42 PM, FA/CS/AGV/Taimur : Checking July 16, 2025 at 8:57 PM, Éváné Bori Viktória : Sziasztok! 2 számú nyomtatónál probléma van, a box packingen, kérlek nézzétek meg. July 16, 2025 at 9:23 PM, Dávid F.A. : Solved! July 16, 2025 at 10:47 PM, Czébely Dániel SL—D : AGV 8 problem plz check! July 16, 2025 at 10:47 PM, FA/CS/AGV/Taimur : Checking July 16, 2025 at 11:14 PM, Czébely Dániel SL—D : @Dávid F.A. @Denkó Jani (F.A.) Sziasztok, tudnátok segíteni a box packingnál? A dupla pántoló 1-es feje nem feszíti meg rendesen a pántot. Egy kicsit kellene állítani rajta. July 16, 2025 at 11:18 PM, 김성태(Seongtae Kim) : AGV 12 Please check July 16, 2025 at 11:21 PM, FA/CS/AGV/Taimur : Solved. July 17, 2025 at 3:23 AM July 17, 2025 at 3:23 AM, 김성태(Seongtae Kim) : AGV 1 Please check July 17, 2025 at 3:23 AM, FA/CS/AGV/Taimur : Sure checking July 17, 2025 at 3:33 AM, Éváné Bori Viktória : Helló! AGV 1 in error. Please check. In the MOSTK013 STK OP3 July 17, 2025 at 3:33 AM, FA/CS/AGV/Taimur : Sure checking. July 17, 2025 at 3:39 AM, Dávid F.A. : Solved July 17, 2025 at 5:52 AM, FACS_오창훈_CHANGHOON : ■17th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Oh Changhoon July 17, 2025 at 7:58 AM, FACS_Bareum kim : ■17th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Kim bareum July 17, 2025 at 9:10 AM, Sási Zsolt SL/C/ EOL : Menjetek kérlek boxpackingre. Oldalsó burkolat felvétellel van probléma July 17, 2025 at 9:30 AM, Döme György F.A : Kész July 17, 2025 at 2:29 PM, R. József C SL EOL : Gyertek kérlek boxpackingra Kicsomagoló sidecovernál vacuum hiba July 17, 2025 at 2:29 PM, Zoltán Harasztia FA : Mindjárt megyünk July 17, 2025 at 2:46 PM, 김대은 : Helló! AGV 15 in error. Please check. July 17, 2025 at 2:47 PM, FA/CS/AGV_ Asjad : Solved July 17, 2025 at 4:29 PM, 유경호(RYU KYEONGHO) : @fa please check box unpacking machine, hight unmatch July 17, 2025 at 4:30 PM, Döme György F.A : On my way July 17, 2025 at 4:30 PM, R. József C SL EOL : Eol7-8 sor között útban van az agv Kérlek küldjétek el Agv#1 July 17, 2025 at 4:30 PM, R. József C SL EOL : Köszönöm July 17, 2025 at 4:31 PM, FA/CS/AGV_ Asjad : Done July 17, 2025 at 4:32 PM, FA/CS/AGV_ Asjad : Szívesen July 17, 2025 at 5:20 PM, R. József C SL EOL : Boxpackingra gyertek kérlek Vákuum probléma van a topcovernál July 17, 2025 at 5:20 PM, Zoltán Harasztia FA : Megyünk July 17, 2025 at 5:50 PM, FACS_TaehyeongJin : ■ 17th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Taehyeong Jin Hyeongi Son July 17, 2025 at 6:09 PM, Czébely Dániel SL—D : Pls move AGV 17 rong position. July 17, 2025 at 6:09 PM, FA/CS/AGV/Taimur : Sure July 17, 2025 at 6:11 PM, Czébely Dániel SL—D : AGV 8 same July 17, 2025 at 6:11 PM, Czébely Dániel SL—D : Plz July 17, 2025 at 6:13 PM, FA/CS/AGV/Taimur : Moving. July 17, 2025 at 6:21 PM, Czébely Dániel SL—D : Ty July 17, 2025 at 6:46 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (0): - Holiday (2): Kiss Balázs, Nagy Gábor Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Kasztel Balázs, Novák Zoltán, Kovács Szabika Modul(2): Zsurbej Zsolt, Martina Dávid July 17, 2025 at 7:08 PM, Nagy Mónika : Sziasztok, line3 kitöltèsnèl az AGV-k nem közlekednek. Rànèznètek kérlek? Köszönöm! July 17, 2025 at 7:08 PM, FA/CS/AGV/Taimur : Checking July 17, 2025 at 7:14 PM, FA/CS/AGV/Taimur : There is no active or pending job from AGV-ACS side. Also input ports are occupied already. Thank you. July 17, 2025 at 7:18 PM, Dávid F.A. : @FA/CS/AGV/Taimur Is there any information why they are in manual mode?! Line 3-4 AGV#02 AGV#03 July 17, 2025 at 7:19 PM, FA/CS/AGV/Taimur : RM LINE 04 is under cleaning. I will turn it back to auto. Thanks July 17, 2025 at 7:22 PM, Dávid F.A. : Thank you very much! July 17, 2025 at 10:13 PM, Czébely Dániel SL—D : AGV 1 problem plz check! July 17, 2025 at 10:13 PM, FA/CS/AGV/Taimur : Checking July 17, 2025 at 10:22 PM, 원승연(Seungyeon Won) : AGV 9 check plz July 17, 2025 at 10:30 PM, FA/CS/AGV/Taimur : Solved. July 17, 2025 at 11:30 PM, Czébely Dániel SL—D : AGV 17 plz Move July 17, 2025 at 11:30 PM, Czébely Dániel SL—D : Rong position. July 17, 2025 at 11:31 PM, FA/CS/AGV/Taimur : Sure July 17, 2025 at 11:31 PM, Czébely Dániel SL—D : Ty July 18, 2025 at 12:37 AM July 18, 2025 at 12:37 AM, Czébely Dániel SL—D : @Dávid F.A. Sziasztok ! A box oacking oldalfalnál servo hiba van gyertek kérlek. July 18, 2025 at 12:38 AM, Czébely Dániel SL—D : AGV 9 plz check July 18, 2025 at 12:41 AM, Éváné Bori Viktória : Helló! AGV 15 and 5 move please July 18, 2025 at 12:41 AM, FA/CS/AGV/Taimur : Solved. July 18, 2025 at 12:41 AM, FA/CS/AGV/Taimur : Sure July 18, 2025 at 12:51 AM, Dávid F.A. : Kész! Figyeljetek a megfelelő keretmennyiségre! Ez okozta hibát! Köszönöm! July 18, 2025 at 2:36 AM, Szijjártó Balázs : Hi! Line 3-on az endplate ellátással gondunk van,az AGV nem jön a palettáért. Segítséget kérnék! July 18, 2025 at 2:36 AM, FA/CS/AGV/Taimur : Checking July 18, 2025 at 2:39 AM, FA/CS/AGV/Taimur : @FA can you please check, there is a problem with Gantry. July 18, 2025 at 2:43 AM, Dávid F.A. : @FACS_Hyeongi Son I would like to ask for help.. probably a program error.. July 18, 2025 at 5:38 AM, FACS_Wooseok Choi : ■18th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Choi wooseok July 18, 2025 at 6:14 AM, Mohammad Amir : Good morning @All, Empty pallets available:- EOL 1&2 & 3 & 4 & 5& 6:- 286 EOL 9 & 10:- 285 Cell Packing Machine:-(Short):-00 Thank you very much! July 18, 2025 at 6:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Csepi Árpád ———————————— July 18, 2025 at 7:15 AM, 서인영 left this chatroom. July 18, 2025 at 7:25 AM, MCS/RTD System : Good morning @Csepi Árpád Please check STK011_C01 crane sew travel x error. Thank you! July 18, 2025 at 7:26 AM, Magosi Erik invited Mérei József. July 18, 2025 at 7:28 AM, FACS_Wooseok Choi : Solved July 18, 2025 at 7:29 AM, MCS/RTD System : Thank you very much! July 18, 2025 at 7:31 AM, FACS_Wooseok Choi : You r welcome! July 18, 2025 at 7:51 AM, FACS_오창훈_CHANGHOON : ■18th July Ivancsa FA CS - Withes service Day(08:00 - 18:00) Oh Changhoon July 18, 2025 at 9:06 AM, 김대은 : AGV 13 problem plz check! July 18, 2025 at 9:06 AM, FA CS AGV Jawad : I check it.. July 18, 2025 at 9:09 AM, FA CS AGV Jawad : Solved July 18, 2025 at 9:30 AM, 유경호(RYU KYEONGHO) : @fa please check box unpacking machine's side cover remove area. July 18, 2025 at 9:32 AM, FACS_Wooseok Choi : Checking July 18, 2025 at 9:32 AM, FACS_Wooseok Choi : 라이트커튼 감지 되서 MC 떨어졌습니다. July 18, 2025 at 10:45 AM, Mohammad Amir : Dear @ACS Team @FA, Could you please check Cell Buffer AGV#7(M0MGV012_VC07) ,it is in Manual mode and it has the task to deliver materials to Cell Packing Machine P02 ,task is getting delayed. Current battery 🔋 level of the AGV#7 :-68.5%. Thank you very much! July 18, 2025 at 10:48 AM, Duna Don : The port is currently occupied. We will set it to auto once the port becomes empty. Thank you! July 18, 2025 at 10:48 AM, Mohammad Amir : Thank you very much for the confirmation. July 18, 2025 at 10:53 AM, FA CS AGV Jawad : System upgrade is underway at Box packing July 18, 2025 at 10:53 AM, Mohammad Amir : Thank you very much for the information! July 18, 2025 at 11:08 AM, Mohammad Amir : Dear @All, For your kind information:- We have active material Requests from Cell Packing Machines however unfortunately again we don't have any material in warehouse that's why AGVs don't bring materials to Box Packing Machine. As soon as material will arrive it will reach to Cell Packing. Thank you very much! July 18, 2025 at 12:19 PM, Mohammad Amir : Dear @All, Empty pallets available:- EOL 1&2 & 3 & 4 & 5& 6:- 243 EOL 9 & 10:- 299 Cell Packing Machine:-(Short):-00 Thank you very much! July 18, 2025 at 3:54 PM, MCS/RTD System : @Csepi Árpád Please check STK011_C01 crane sew travel x error. Thank you! July 18, 2025 at 3:59 PM, Csepi Árpád : Solved July 18, 2025 at 3:59 PM, MCS/RTD System : Thank you very much! July 18, 2025 at 5:13 PM, Mohammad Amir : Dear @All, Empty pallets available:- EOL 1&2 & 3 & 4 & 5& 6:- 203 EOL 9 & 10:- 311 Box Packing Materials available:-(Short):-00 Thank you very much! July 18, 2025 at 5:45 PM, FACS_Youngmin LEE : ■ 18th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 18, 2025 at 6:23 PM, Csanálosi Gábor FA : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.18. 11 Tech,+1 overtime 0SL Overtime(1): Szabadi Miklós Holiday(2): Szücs Géza Imre, Takács Ádám Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (2): Böröczki Balázs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert, --------------- Form/Modul(3): Boromisza Zolt July 18, 2025 at 11:06 PM, Vadász Dóra SSL/B : Sziasztok AGV#12 leállt be/kitöltés közben. Nézzetek rá kérlek. Köszönöm July 18, 2025 at 11:17 PM, Gerbovits Kevin : Megyünk July 18, 2025 at 11:33 PM, Gerbovits Kevin : Kész July 19, 2025 at 5:30 AM July 19, 2025 at 5:30 AM, 김성태(Seongtae Kim) : AGV 15 check Please July 19, 2025 at 5:30 AM, FA-CS-AGV-Masoud : Coming July 19, 2025 at 5:32 AM, FA-CS-AGV-Masoud : Solved July 19, 2025 at 5:43 AM, FACS_Wooseok Choi : ■19th July Ivancsa FA CS - Withes service Morning(06:00 - 16:00) Choi wooseok July 19, 2025 at 6:13 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2+1): Brázik János Csepi Árpád ———————————— July 19, 2025 at 7:29 AM, Szentirmai Z. A/SSL : @Csepi Árpád @Brázik János Cell Buffer #2 SMC#1 FORK RIGHT COLLAPSE DETECT 1 error Kérlek nézzétek meg. Köszi July 19, 2025 at 7:30 AM, Szentirmai Z. A/SSL : @Csepi Árpád @Brázik János Cell Buffer #1 CRC2 C/V#08 C/V DATA MISS MATCH EXIST ERROR ezt is légyszíves 😉 July 19, 2025 at 7:37 AM, Zoltán Harasztia FA : Kész July 19, 2025 at 9:46 AM, Szentirmai Z. A/SSL : @Zoltán Harasztia FA Cell Buffer ismét megállt, kérlek nézz rá. Köszönöm July 19, 2025 at 9:46 AM, Zoltán Harasztia FA : Már itt vagyok July 19, 2025 at 9:46 AM, Szentirmai Z. A/SSL : Köszi July 19, 2025 at 9:49 AM, Zoltán Harasztia FA : Kész July 19, 2025 at 10:22 AM, Szentirmai Z. A/SSL : @FACS_Wooseok Choi Please change the pallet arriving at the unpacking machine from "Z" type to "R" type. Thank you! July 19, 2025 at 10:25 AM, 배병민 (Bae Byoungmin) : We do not change types. July 19, 2025 at 10:27 AM, FACS_Wooseok Choi : 파레트 바꿔서 탑 커버 Unuse 모드 관련하여 문의한 내용입니다. 변경 완료 했습니다. July 19, 2025 at 2:12 PM, Szentirmai Z. A/SSL : @FACS_Wooseok Choi The unpacking machine does not receive a pallet, please check. Thank you. July 19, 2025 at 2:12 PM, FACS_Wooseok Choi : Checking July 19, 2025 at 2:14 PM, Zoltán Harasztia FA : Szerintem elfogyott ami ki volt kérve. Az előbb néztem és már nem volt parancs hogy hozzon ki. July 19, 2025 at 2:47 PM, Szentirmai Z. A/SSL : @FACS_Wooseok Choi The AGV does not supply an empty pallet for EOL#4. We installed it with a forklift. Please check. July 19, 2025 at 2:48 PM, Szentirmai Z. A/SSL : F4CPM010_P01 port July 19, 2025 at 2:49 PM, FACS_Wooseok Choi : Okay. I will checking July 19, 2025 at 3:20 PM, FACS_Wooseok Choi : After someone touched the light curtain, STK13 was in a state of silence. Now it will go back normal state. July 19, 2025 at 3:22 PM, Szentirmai Z. A/SSL : Thank you July 19, 2025 at 5:27 PM, FACS_Youngmin LEE : ■ 19th July Ivancsa FA CS - Withes service Night(18:00 - 06:00) Kim sangtae Lee youngmin July 19, 2025 at 5:58 PM, 요셉 : EOL agv#13 check plz July 19, 2025 at 5:58 PM, FA-CS-AGV-Masoud : Solved July 19, 2025 at 6:33 PM, Vadász Dóra SSL/B : Sziasztok Box packingen label hiba. Kérem nézzétek meg. Köszönöm July 19, 2025 at 6:36 PM, Denkó Jani (F.A.) : Megyünk July 19, 2025 at 6:47 PM, Denkó Jani (F.A.) : Kész

Chunk 731:
March 1, 2025 at 6:26 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0): ———————————— Overtime(0):

Chunk 732:
March 1, 2025 at 6:11 PM, Szücs Géza FT-B: Szép estét! Good evening! "B" műszak, 12/12 Tech, 0Sl Overtime(0): Holiday(0): Sick(0): - --------------- Electrode+Assy (9): Kovács Ágnes, Rácz Dániel, Csanálosi Gábor, Radics András, Pintye Miklós László, Böröczki Balázs, Pálosi Róbert, Takács Ádám, Czeilinger Krisztián --------------- Formation/Modul(3): Denkó János, Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 733:
March 2, 2025 at 6:08 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 0 Interpreter, 3 Overtime ———————————— Electrode (2): Benczik Ádám Sebestyén Dávid István ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter (0):

Chunk 734:
March 2, 2025 at 6:25 PM, Szücs Géza FT-B: Szép estét! Good evening! "B" műszak, 11/12 Tech, 0Sl Overtime(0): Holiday(1): Böröczki Balázs Sick(0): - --------------- Electrode+Assy (9): Kovács Ágnes, Denkó János, Rácz Dániel, Csanálosi Gábor, Radics András, Pintye Miklós László, Pálosi Róbert, Takács Ádám, Czeilinger Krisztián --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 735:
March 2, 2025 at 10:32 PM, Fuszenecker Zoltán: Sziasztok. Segítséget szeretnék kérni Porbetöltésre. CV14-102 Lost Data Alarm illetve a 2 es AGV M6600 Align serial Endcoder hibában van. Rá tudtok nézni? @FA
March 3, 2025 at 2:38 AM, Szücs Géza FT-B: @Gyura Mihály szia, itt kérd a szükséges raklapokat @VK (mcs) -tól.
March 3, 2025 at 2:40 AM, Gyura Mihály: @VK (mcs) Szeretnék kérni CDS172 7 palettát. Köszönöm szépen.
March 3, 2025 at 2:41 AM, VK (mcs): Checking

Chunk 736:
March 3, 2025 at 2:41 AM, Gyura Mihály: Thank you
March 3, 2025 at 2:45 AM, VK (mcs): If I translated correctly. You want 7 pallets ? Right
March 3, 2025 at 2:46 AM, Gyura Mihály: Yes
March 3, 2025 at 2:53 AM, VK (mcs): 7 pallets Ecopro Product definition ID: 111-00150A Has been released.
March 3, 2025 at 3:00 AM, VK (mcs): @FA Please check E0CNVC12 port 7 , is there any actual carrier on that port?
March 3, 2025 at 3:03 AM, Szücs Géza FT-B: @Radics András a P07es porton van most áru?

Chunk 737:
March 3, 2025 at 3:04 AM, Radics András: Még az avg-n van bent. Nem kaptuk ki
March 3, 2025 at 3:53 AM, Szücs Géza FT-B: 7et kértél, 14 lett. belőle XD
March 3, 2025 at 6:02 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:11/12 Overtime (0): - Sick (1):Béki Norbert Holiday (0):- Elektróda:(4) Kiss Balázs, Szabadi Miklós Kasztel Balázs, Novák Zoltán Assembly(4): Zsurbej Zsolt, Nagy Zsolt Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 738:
March 3, 2025 at 6:17 AM, Kőszegi Bence Csaba: Sziasztok! Poron a katód oldali AGV-k ki vannak kapcsolva. Használhatók vagy kell anyagot kikérnünk?
March 3, 2025 at 6:19 AM, Janos R. MX SL: Éjszaka a katód oldal manualba ment ha jó l tudom a kivetel.
March 3, 2025 at 6:20 AM, Dániel Hufnágel: Szia, jó reggelt! Az éjszakai műszak állítása szerint nincs olyan AGV ami használható lenne automatán, csak manuálisan lehet anyagot kivenni!

Chunk 739:
March 3, 2025 at 6:21 AM, KIM SEYEON [김세연]_FA: @Dániel Hufnágel CA : AGV manual mode usage AN : AGV auto mode usage
March 3, 2025 at 6:21 AM, Fuszenecker Zoltán: Az éjszaka első felében 1DB AGV ment autómatában. Az éjszaka második felében manuálisan volt kivéve az anyag
March 3, 2025 at 6:23 AM, Kőszegi Bence Csaba: Hello. I would like to request the following materials: 111-00150A 15 paletts. Ugyan ide valakit kérek szépen aki leszedi. Köszi.

Chunk 740:
March 3, 2025 at 6:24 AM, KIM SEYEON [김세연]_FA: @Dániel Hufnágel please support this
March 3, 2025 at 6:24 AM, Mohammad Amir: Good morning, Working on it.
March 3, 2025 at 6:28 AM, Mohammad Amir: Materials have started to release on the O/P ports of CNVC12 . ✅ Please collect it. Thank you very much!
March 3, 2025 at 6:29 AM, Szabadi Miki: Úton vagyunk
March 3, 2025 at 6:40 AM, Mohammad Amir: All materials have been transferred successfully ✅. Thank you very much!

Chunk 741:
March 3, 2025 at 7:09 AM, Szücs Géza FT-B: @Dániel Hufnágel CA oldalon AGV#3 használható a manuálisan.
March 3, 2025 at 7:09 AM, Szücs Géza FT-B: fel is töltöttük az éjszaka
March 3, 2025 at 7:09 AM, Szabadi Miki: Köszike azzal nyomjuk 🙂
March 3, 2025 at 8:23 AM, 장영환(Younghwan Chang): 양극 AGV 사용 가능한 상태인가요?
March 3, 2025 at 8:36 AM, 최대운: 지난주 말씀드렸듯이 분체는 금일 오전부터 추가 점검 진행 예정으로 바로 사용은 어려운 상황입니다.

Chunk 742:
March 3, 2025 at 8:45 AM, KIM SEYEON [김세연]_FA: @장영환(Younghwan Chang) 피엠님 야간에는 수동모드로 자재 받아서 바닥에 내려놨습니다. 혹시 자동으로 돌려야 하는 상황인가요? 수동으로 자재공급에는 문제없습니다.
March 3, 2025 at 8:52 AM, 장영환(Younghwan Chang): 자동을 해야하는 상황은 아니고 혹시 조치됐나해서 여쭤봤습니다
March 3, 2025 at 10:03 AM, 윤경환: @FA 안녕하세요. 양극분체 창고 RTV 에서 스태커 컨베이어 못 넘어가는 현상 발생 하였습니다. 직접 확인 하신다고 하여 현장 보존 해놓겠습니다.
March 3, 2025 at 10:04 AM, 유병일: @심찬울 매니저님 혹시 지금 확인 가능한 인원 있을까요??
March 3, 2025 at 10:04 AM, KIM SEYEON [김세연]_FA: @이석규 매니저 님 현장 같이 확인할수 있을까요? 10시반 요청드립니다.

Chunk 743:
March 3, 2025 at 10:06 AM, 이석규 매니저: 네 회의중이라 10분정도 늦을수도 있습니다.
March 3, 2025 at 10:07 AM, KIM SEYEON [김세연]_FA: 넵
March 3, 2025 at 10:15 AM, 심찬울: 현장 와있는데, 같이 확인 부탁드립니다 @유병일 @KIM SEYEON [김세연]_FA
March 3, 2025 at 10:17 AM, 유병일: 넵 지금 갈게요
March 3, 2025 at 11:07 AM, Kőszegi Bence Csaba: Por anód autómata logisztikával gond van
March 3, 2025 at 11:07 AM, Kőszegi Bence Csaba: @Szabadi Miki gyertek légyszi
March 3, 2025 at 11:08 AM, Szabadi Miki: Rendben megyünk

Chunk 744:
March 3, 2025 at 11:11 AM, Kőszegi Bence Csaba: Úgy készülj hogy szedünk is le katódon
March 3, 2025 at 11:12 AM, Kőszegi Bence Csaba: Hello. I would like to request the following materials: 111-00150A 15 paletts. Thanks
March 3, 2025 at 11:12 AM, Sazzad Bhai SKon: We'll transfer to CNV P07
March 3, 2025 at 11:13 AM, Szabadi Miki: Okés rendben
March 3, 2025 at 11:13 AM, Mohammad Amir: Hello, Working on it!

Chunk 745:
March 3, 2025 at 11:16 AM, Mohammad Amir: Transfer has been initiated ✅ Please collect it from the O/P port of CNVC12_P07. Thank you very much!
March 3, 2025 at 11:21 AM, Mohammad Amir: All materials have been transferred successfully ✅. Thank you very much!
March 3, 2025 at 11:44 AM, 장영환(Younghwan Chang): Cathode AGV is not working so we have to move them manually
March 3, 2025 at 11:45 AM, KIM SEYEON [김세연]_FA: @Dániel Hufnágel please support powder Cathode to move it agv manually

Chunk 746:
March 3, 2025 at 11:45 AM, KIM SEYEON [김세연]_FA: arrange technician now.
March 3, 2025 at 11:45 AM, Dániel Hufnágel: Guys are there
March 3, 2025 at 3:44 PM, 윤경환: @FA 안녕하세요. 포일 창고 1호기쪽 컨베이어 에서 투입이 안되고 있는데 확인 가능 하실까요? 화물 감지 시간이 오전 10시 13분인데 아직도 안들어가고 있네요.
March 3, 2025 at 3:46 PM, Mohammad Amir: Sir,Are you referring to the Foil located at E0STK001_M02_OP01? Thank you very much!

Chunk 747:
March 3, 2025 at 3:48 PM, Mohammad Amir: For this Carrier 243106-0755N, Job was cancelled at 10:13 by the Operator that's why it is not moving. It had destination to E0STK001_Z01. Thank you very much!
March 3, 2025 at 3:49 PM, Mohammad Amir: Job has been created successfully to store it to the E0STK001 at 15:46. Carrier has successfully stored in the E0STK001(0200405). ✅.
March 3, 2025 at 3:58 PM, 윤경환: Thank you very much.
March 3, 2025 at 3:59 PM, Mohammad Amir: You are welcome,Sir!

Chunk 748:
March 3, 2025 at 10:48 PM, Powder tréner: Sziasztok segítséget szeretnék nék kéni a poron az Anod oldalon a termelésben megált az egyik AGV meg nézitek
March 3, 2025 at 10:49 PM, Kertész Dániel: Megyünk
March 4, 2025 at 1:30 AM, Zagyva Tamás: Sziasztok. Poron az anód raktárnál nem akar üzemelni az AGV.Meg tudnátok nézni?Köszi
March 4, 2025 at 1:31 AM, Marsi Gábor: Megyünk
March 4, 2025 at 1:31 AM, 방혁 PM(Bang.Hyuk) FA: Hello
March 4, 2025 at 1:31 AM, Zagyva Tamás: Várj

Chunk 749:
March 4, 2025 at 1:32 AM, Zagyva Tamás: Elindult a másik.
March 4, 2025 at 1:32 AM, Zagyva Tamás: Ne gyere
March 4, 2025 at 1:32 AM, 방혁 PM(Bang.Hyuk) FA: The AGV there is not working
March 4, 2025 at 1:33 AM, 방혁 PM(Bang.Hyuk) FA: manually unload the cargo
March 4, 2025 at 1:33 AM, Marsi Gábor: Ok
March 4, 2025 at 1:33 AM, Farkas Tamàs: Auto
March 4, 2025 at 1:53 AM, Powder tréner: Sziasztok segítséget szeretnék nék kéni a poron az Anod oldalon a termelésben megált az egyik AGV meg nézitek

Chunk 750:
March 4, 2025 at 1:54 AM, Marsi Gábor: Már úton vagyunk. Láttuk
March 4, 2025 at 6:21 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:11/12 Overtime (0): - Sick (1):Béki Norbert Holiday (0):- Elektróda:(2) Kiss Balázs, Szabadi Miklós Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Károly, Hufnágel Dániel Novák Zoltán, Kasztel Balázs Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 751:
March 4, 2025 at 6:36 AM, Kőszegi Bence Csaba: Hello. I would like to request the following materials: 111-00150A 20 paletts. Thanks Ugyan ide segítséget kérek a leszedésben. Köszönöm
March 4, 2025 at 6:36 AM, Mohammad Amir: Good morning, Working on it!
March 4, 2025 at 6:37 AM, Szabadi Miki: Szia nemsoká érkezünk
March 4, 2025 at 6:38 AM, 지석범PM (이반차FA): Day Shift FA Technician Schedule Date: 2025.mar.4 Time: 06:00–18:00 1. Ji Seok Beom

Chunk 752:
March 4, 2025 at 6:40 AM, Mohammad Amir: Materials transfer has been initiated ✅ Please collect it from the O/P port of the CNVC12 . Thank you very much!
March 4, 2025 at 6:48 AM, Mohammad Amir: All Materials have been transferred successfully ✅. Thank you very much!
March 4, 2025 at 9:44 AM, Kőszegi Bence Csaba: Por anód területen bent megállt az egyik AGV
March 4, 2025 at 9:46 AM, Szabadi Miki: Rendben mindjárt megyünk

Chunk 753:
March 4, 2025 at 1:11 PM, Molnár Ferenc: Sziasztok! Por raktár alsó szinten az anód oldalon meg állt az automata raktár. Hibakód: F0282 CV04-014
March 4, 2025 at 1:13 PM, Szabadi Miki: Rendben megyünk megnézzük
March 4, 2025 at 1:19 PM, Molnár Ferenc: Köszönöm
March 4, 2025 at 3:10 PM, Varga Zoltán: We pushed LR button ön anode side but materials dont come erőm warehouse E1PLA011_P01 can someone help please?
March 4, 2025 at 3:11 PM, Mohammad Amir: Checking

Chunk 754:
March 4, 2025 at 3:11 PM, Szabadi Miki: Thank you
March 4, 2025 at 3:11 PM, Janos R. MX SL: Beszéltem már a Mikivel
March 4, 2025 at 3:11 PM, Mohammad Amir: You are welcome!
March 4, 2025 at 3:12 PM, Mohammad Amir: Please press LR again ,we did not received LR in recent time. Thank you very much!
March 4, 2025 at 3:14 PM, Varga Zoltán: And now?
March 4, 2025 at 3:14 PM, Mohammad Amir: LR received successfully at 15:13. Carrier on the way. ✅ I am monitoring the transfer. Thank you very much!

Chunk 755:
March 4, 2025 at 3:14 PM, Varga Zoltán: Thank you
March 4, 2025 at 3:15 PM, Mohammad Amir: You are welcome!
March 4, 2025 at 3:18 PM, Janos R. MX SL: Hello. I would like to request the following materials: 111-00150A 15 paletts. Thanks Ugyan ide segítséget kérek a leszedésben. Köszönöm
March 4, 2025 at 3:19 PM, Mohammad Amir: Hello , Working on it!
March 4, 2025 at 3:24 PM, Szabadi Miki: Megyünk

Chunk 756:
March 4, 2025 at 3:24 PM, Mohammad Amir: I have started the materials transfer Successfully ✅ Please collect it from the O/P port of the CNVC12. Thank you very much!
March 4, 2025 at 3:27 PM, Mohammad Amir: I have successfully transferred all the requested Materials. ✅ Thank you very much!
March 4, 2025 at 3:33 PM, Mohammad Amir: Material has successfully arrived at E1PLA011_P01. ✅ Thank you very much!

Chunk 757:
March 4, 2025 at 7:24 PM, Powder tréner: Sziasztok segítséget szeretnék nék kéni a poron az Anod oldalon a termelésben megált az egyik AGV meg nézitek
March 4, 2025 at 7:27 PM, Marsi Gábor: Úton vagyunk
March 4, 2025 at 7:50 PM, Powder tréner: Hello the Anod 1 and 2 line does not bring the raw material and the call request is in progress what is the reason ?
March 4, 2025 at 7:52 PM, Shahbaz 샤바즈 MCS/RTD: AgV#01 is on the way to E1PLA020_P01

Chunk 758:
March 4, 2025 at 7:55 PM, Shahbaz 샤바즈 MCS/RTD: LR is not up for line 1
March 4, 2025 at 7:56 PM, Powder tréner: Thank you, but it does not take the material to E1PLA011_P01 and the call is continuous
March 4, 2025 at 8:00 PM, Shahbaz 샤바즈 MCS/RTD: According to log the last LR was received at 15:13 for E1PLA011_P01 and PS112-2406170181 was transferred. No LR reported after that.
March 4, 2025 at 8:01 PM, 윤경환: 금일 음극 분체 투입 완료 되었습니다. 명일 양극 예정인데 문제 생기면 금일 처럼 도움 부탁 드리겠습니다. 감사 합니다.

Chunk 759:
March 4, 2025 at 8:19 PM, KIM SEYEON [김세연]_FA: 고생많으셨습니다. 문제생기면 연락부탁드립니다. 감사합니다
March 4, 2025 at 8:47 PM, Powder tréner: Hello! I would like to ask for these materials: 15 pallets 111-00150A (CDS172-14BW) (Katod Materials) Thank you!
March 4, 2025 at 8:47 PM, Powder tréner: Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm
March 4, 2025 at 8:47 PM, Marsi Gábor: Megyünk
March 4, 2025 at 8:49 PM, Shahbaz 샤바즈 MCS/RTD: Hello! We are releasing them to E0CNVC12_P07. Thank you.

Chunk 760:
March 5, 2025 at 12:59 AM, Zagyva Tamás: Poron az airshowerbwn megállt a robot.Megnézitek?
March 5, 2025 at 12:59 AM, Marsi Gábor: Elindultunk
March 5, 2025 at 12:59 AM, Zagyva Tamás: Köszi

Chunk 761:
March 5, 2025 at 6:44 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————
March 5, 2025 at 9:49 AM, Powder tréner: Poron anyag raktár nem adja ki M36H anyagot.

Chunk 762:
March 5, 2025 at 12:45 PM, Yoon: @FA @유병일 @배병민 (Bae Byoungmin) 저희 포일동 1번 호이스트에서 경고음이 울리고 있습니다. 호이스트 작동도 하지 않고요. 확인하시여 조치 부탁드립니다
March 5, 2025 at 12:50 PM, Franyó Tamás left this chatroom.
March 5, 2025 at 12:56 PM, KIM SEYEON [김세연]_FA: @Mr.Miti (미티) FA please check foil hoist.
March 5, 2025 at 2:14 PM, Shakir (MCS): @FA Please check powder CA stk E0STKC11, Hoist time over error. Thank you
March 5, 2025 at 2:16 PM, Kőszegi Bence Csaba left this chatroom.

Chunk 763:
March 5, 2025 at 3:36 PM, 장영환(Younghwan Chang): @KIM SEYEON [김세연]_FA 김세연pm님 내일 오전에 E603C 공정감사 대비 현장 점검이 있을 예정인데 AGV 작동을 점검하고자 합니다 고수영CTO님과 CQ에서 참관예정이고 음극 쪽으로 가려고 하는데 혹시 문제되는 부분이 있을까요?
March 5, 2025 at 3:40 PM, KIM SEYEON [김세연]_FA: 오늘 가봤는데 음극 잘 동작했습니다. 저도 참석하겠습니다.
March 5, 2025 at 3:47 PM, 장영환(Younghwan Chang): 네 감사합니다 내일 아침에 정확한 시간 정해지면 다시 말씀드리겠습니다
March 5, 2025 at 4:19 PM, 장영환(Younghwan Chang): CTO님이 내일 9시에 전극동 방문 예정이고 개인용 풀페이스 마스크만 따로 준비 부탁드립니다

Chunk 764:
March 5, 2025 at 6:23 PM, Fuszenecker Zoltán: Hello! I would like to ask for these materials: 20 pallets 111-00150A (CDS172-14BW) (Katod Materials) Thank you!
March 5, 2025 at 6:23 PM, Fuszenecker Zoltán: And kérnék segítséget a levételhez
March 5, 2025 at 6:24 PM, Szücs Géza FT-B: @Fuszenecker Zoltán Szia Zoli. Jelenleg zajlik a poron betöltés valamelyik oldalon?

Chunk 765:
March 5, 2025 at 6:24 PM, Fuszenecker Zoltán: Mind a két oldal termel. De mivel kevesen vagyunk így Katode oldal fog jobban menni mert az a prio
March 5, 2025 at 6:28 PM, Szücs Géza FT-B: Értem, akkor a technikusok 30 perc múlva odaérnek. 19:30-20:00 között lesz szünetük majd.
March 5, 2025 at 6:30 PM, Fuszenecker Zoltán: Okés
March 5, 2025 at 6:31 PM, Szücs Géza FT-B: azért lesz kb 30 perc, hogy odaérnek, mert termelésben van mindenki
March 5, 2025 at 6:40 PM, VK (mcs): Material released.

Chunk 766:
March 5, 2025 at 6:41 PM, Fuszenecker Zoltán: Thank you
March 5, 2025 at 6:42 PM, Fuszenecker Zoltán: Rendben annyi anyagunk még van

Chunk 767:
March 5, 2025 at 6:45 PM, Szücs Géza FT-B: Szép estét! Good evening! "B" műszak, 11/12 Tech, 0Sl Overtime(0): Holiday(1): Radics András Sick(0): - --------------- Electrode(4): Rácz Dániel, Czeilinger Krisztián, Pálosi Róbert, Csanálosi Gábor --------------- Assy (4): Böröczky Balázs, Pintye Miklós László, Takács Ádám, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denko János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 768:
March 5, 2025 at 7:37 PM, Szücs Géza FT-B invited Csanálosi Gábor FA.
March 5, 2025 at 9:16 PM, Szücs Géza FT-B: @Fuszenecker Zoltán Poron, AN oldalon, Line2-re kértetek anyagot. Line 2-re engedjem az anyagot?
March 5, 2025 at 9:16 PM, Fuszenecker Zoltán: Nem kértünk oda semmi anyagot
March 5, 2025 at 9:16 PM, Szücs Géza FT-B: (ha engedélyezik)
March 5, 2025 at 9:17 PM, Szücs Géza FT-B: egyik feladat 18:01-kor másik 18:07-kor generálódott

Chunk 769:
March 5, 2025 at 9:18 PM, Fuszenecker Zoltán: Pedig ott egyedül én voltam még bent és nem kértem anyagot. Már csak azért sem mert ott jelenleg nem megy a termelés
March 5, 2025 at 9:18 PM, Szücs Géza FT-B: Akkor gondolom ooda ne pakoljanak az AGV-k
March 5, 2025 at 9:19 PM, Fuszenecker Zoltán: Nem igen kéne
March 5, 2025 at 9:19 PM, Szücs Géza FT-B: Azért is fura, mert az útvonaluk a Line2-höz tiltva van. Ezért mennek körbe-körbe
March 5, 2025 at 9:19 PM, Fuszenecker Zoltán: Csodálatos

Chunk 770:
March 5, 2025 at 9:19 PM, Szücs Géza FT-B: AGV-n lévő anyagok nektek kelleni fog a Line1-re?
March 5, 2025 at 9:20 PM, Fuszenecker Zoltán: Nem
March 5, 2025 at 9:21 PM, Fuszenecker Zoltán: Tehát ha lehet és meg tudod oldani akkor azokat az anyagokat vissza kéne küldeni a raktárba
March 5, 2025 at 9:21 PM, Szücs Géza FT-B: Erre gondoltam, megpróbálom
March 5, 2025 at 9:22 PM, Szücs Géza FT-B: csak dokumentálom az esetet
March 5, 2025 at 9:22 PM, Fuszenecker Zoltán: Okés

Chunk 771:
March 5, 2025 at 9:22 PM, Fuszenecker Zoltán: Köszönöm
March 5, 2025 at 9:49 PM, Fuszenecker Zoltán: Sziasztok. Porbetöltésre szeretnék kérni segítséget. Anode raktárban a CV14-102 es port ki ált hibára. [Lost Data Alarm]. Rá tudnátok nézni? Köszönöm @FA

Chunk 772:
March 5, 2025 at 9:49 PM, Szücs Géza FT-B: @MCS , we have a big problem. 1F AN Powder, AGVs are constantly receiving commands from MCS, with a destination that does not work. Please block the following ports in MCS: - E1PLA041_P01 - E1PLA041_P02 Thank You very much
March 5, 2025 at 9:50 PM, VK (mcs): Checking
March 5, 2025 at 9:52 PM, Szücs Géza FT-B: beírtam neki, nyomsz egy resetet? minnyá megyek fel, lesz ott még probléma ..

Chunk 773:
March 5, 2025 at 9:53 PM, VK (mcs): For both port in RTD transfer status is ready to load I will modify it. Do you want me to cancel current jobs as well?
March 5, 2025 at 9:53 PM, Fuszenecker Zoltán: Oké. Itt fent várlak
March 5, 2025 at 9:54 PM, Szücs Géza FT-B: meg egy startot is hosszan
March 5, 2025 at 9:54 PM, Szücs Géza FT-B: 10 perc és ottvagyok
March 5, 2025 at 9:54 PM, Fuszenecker Zoltán: Oké

Chunk 774:
March 5, 2025 at 9:55 PM, Fuszenecker Zoltán: Nyomtam neki startot de pont annyi történt amennyit vártam
March 5, 2025 at 9:56 PM, Szücs Géza FT-B: 🤣😨 biztos rossz újjal nyomod 🤭😂
March 5, 2025 at 9:59 PM, Fuszenecker Zoltán: Lehet 😱
March 5, 2025 at 10:10 PM, VK (mcs): One more thing We received LR from E1PLC031_P02 E1PLC011_P02 at 18:53 But AGVs are not in service. Is there any operation on those equipment?

Chunk 775:
March 5, 2025 at 10:19 PM, Szücs Géza FT-B: On the CA side, AGVs are not running in automatic mode. Technicians have already manually picked up the goods for manufacturing. on this equipmentbworking with manual load.
March 5, 2025 at 10:21 PM, VK (mcs): Thank you
March 6, 2025 at 12:32 AM, Fuszenecker Zoltán: Hello! I would like to ask for these materials: 20 pallets 111-00150A (CDS172-14BW) (Katod Materials) Thank you!

Chunk 776:
March 6, 2025 at 12:32 AM, Fuszenecker Zoltán: Ugyan ide kérek segítséget levenni. Köszönöm
March 6, 2025 at 12:42 AM, VK (mcs): Material released.
March 6, 2025 at 12:44 AM, Fuszenecker Zoltán: Thank you

Chunk 777:
March 6, 2025 at 6:13 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 778:
March 6, 2025 at 8:42 AM, Powder tréner: Hello! I would like to ask for these materials: 25 pallets 111-00150A (CDS172-14BW) (Katod Materials) Thank you!
March 6, 2025 at 8:44 AM, Shakir (MCS): Working on it
March 6, 2025 at 8:49 AM, KIM SEYEON [김세연]_FA: is it Cathode?
March 6, 2025 at 8:49 AM, Mr.Miti (미티) FA: Yes
March 6, 2025 at 8:51 AM, Shakir (MCS): We are releasing them to E0CNVC12_P07. Thank you.

Chunk 779:
March 6, 2025 at 9:17 AM, Shakir (MCS): Materials transfer has been initiated ✅ Please collect it from the O/P port of the CNVC12 . Thank you very much!
March 6, 2025 at 10:04 AM, 주범진: @송광진PM FA장비unit @Mr.Miti (미티) FA 안녕하세요 자동화 창고에 있는 하기 자재 1F음극쪽으로 바닥에 내려 놓은 것까지만 도움 주실 수 있으실까요? Posco_PS112-2501100091 93번 팔렛 Lot 라벨이 91로 되어 있다고 들어서, 반품 진행 위해 실물 확인 필요하여 요청 드립니다
March 6, 2025 at 10:07 AM, Mr.Miti (미티) FA: Where are you?
March 6, 2025 at 10:16 AM, 주범진: Electrode 1f anode

Chunk 780:
March 6, 2025 at 10:22 AM, Mr.Miti (미티) FA: I’m on Cathode 1F
March 6, 2025 at 10:26 AM, 주범진: okay please wait 2 minites
March 6, 2025 at 10:31 AM, Mr.Miti (미티) FA: Its comong to anode 1F P07 port
March 6, 2025 at 10:31 AM, Fuszenecker Zoltán left this chatroom.
March 6, 2025 at 11:11 AM, 윤경환: @FA @KIM SEYEON [김세연]_FA 피엠님 안녕하세요. 양극 분체 창고 입고 잘되고 있습니다만, 음극 분체 창고 RTV가 가끔 무언정지 하는 상황이 발생 하고 있습니다.
March 6, 2025 at 11:12 AM, 윤경환: 확인 부탁 드리겠습니다.

Chunk 781:
March 6, 2025 at 11:15 AM, KIM SEYEON [김세연]_FA: @윤경환 조장님 무언정지시 현장 보존해주시고, 불러주시겠어요? 감사합니다.
March 6, 2025 at 11:23 AM, 윤경환: 추후에 발생 하면 연락 드리겠습니다.
March 6, 2025 at 1:14 PM, Molnár Ferenc: Helló! A fólia raktárban a betöltésnél folyamatosan sípol a daru.

Chunk 782:
March 6, 2025 at 6:08 PM, Csanálosi Gábor FA: Szép estét! Good evening! "B" műszak, 10/12 Tech, 0Sl Overtime(0): Holiday(2): Radics András, Czeilinger Krisztián Sick(0): - --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Csanálosi Gábor, Denkó János --------------- Assy (4): Böröczki Balázs, Pintye Miklós László, Takács Ádám, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 783:
March 6, 2025 at 6:41 PM, Powder tréner: Hello! I would like to ask for these materials: 20 pallets 111-00150A (CDS172-14BW) (Katod Materials) Thank you! Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm
March 6, 2025 at 6:43 PM, Csanálosi Gábor FA: Kb 15 perc és ott vagyunk.
March 6, 2025 at 6:43 PM, Powder tréner: Okés
March 6, 2025 at 6:51 PM, VK (mcs): Material released.
March 6, 2025 at 11:42 PM, Powder tréner: Sziasztok A pora kérnék segítséget a paletták levételéhez Köszönöm

Chunk 784:
March 7, 2025 at 5:58 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:12/13 Overtime (0): - Sick (1):Béki Norbert Holiday (0):- Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Károly, Hufnágel Dániel Novák Zoltán, Kasztel Balázs Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 7, 2025 at 1:22 PM, Molnár Ferenc invited Fábián Anna 언너.
March 7, 2025 at 1:22 PM, Molnár Ferenc: .

Chunk 785:
March 7, 2025 at 1:39 PM, Janos R. MX SL: Hi, please release 1 palett 112-00249A to port P07 on Powder site 1F
March 7, 2025 at 1:39 PM, Mohammad Amir: Hello , Working on it!
March 7, 2025 at 1:45 PM, Mohammad Amir: Desired Material has been released successfully ✅. Please collect it from the P07. Thank you very much!
March 7, 2025 at 1:46 PM, Janos R. MX SL: @Dániel Hufnágel légyszíves ha lesz rá idötök
March 7, 2025 at 2:13 PM, Dániel Hufnágel: Mingyárt felérnek a srácok és leszedik

Chunk 786:
March 7, 2025 at 2:24 PM, Szabadi Miki: Levettem , valaki el tudná vinni útból hogy agv-t vissza tudjam kapcsolni autoba ?
March 7, 2025 at 2:26 PM, Janos R. MX SL: küldök vkit
March 7, 2025 at 2:31 PM, Szabadi Miki: Köszi kész is van
March 7, 2025 at 3:08 PM, 윤경환: @Fa 포일 창고 스태커 2번 확인 부탁 드립니다.
March 7, 2025 at 3:09 PM, 김민수: BM/PM모드 적용중입니다. 테스트 및 종료까지 앟으로 15분 걸립니다.
March 7, 2025 at 3:10 PM, 윤경환: 지금 샘플링 아이템들 배출해서 샘플링 중인데... 일단 알겠습니다.
March 7, 2025 at 3:18 PM, 김민수: 살려뒀습니다.

Chunk 787:
March 7, 2025 at 3:19 PM, 윤경환: 감사 합니다.
March 7, 2025 at 3:50 PM, 윤경환: @FA 양극분체 CCS 목적지를 받지 못해 알람 발생 하고 있습니다. 확인 부탁 드립니다.
March 7, 2025 at 4:17 PM, KIM SEYEON [김세연]_FA: @Dániel Hufnágel please check by FA technician
March 7, 2025 at 4:26 PM, 윤경환: CCS 끊어졌던거 같은데 다시 붙었습니다. 피엠님
March 7, 2025 at 5:59 PM, 윤경환: @FA Can you help me with 1 person in the cathode GF?
March 7, 2025 at 6:06 PM, Marsi Gábor: Wich area? Asap?

Chunk 788:
March 7, 2025 at 6:08 PM, KIM SEYEON [김세연]_FA: @Baek Hojong(백호종)FA 피엠님 윤경환 조장님 지원 부탁드립니다.
March 7, 2025 at 6:08 PM, 윤경환: 혼자 해결 했습니다. 감사 합니다.
March 7, 2025 at 6:09 PM, 윤경환: Solved.
March 7, 2025 at 6:15 PM, 윤경환: @Baek Hojong(백호종)FA 피엠님 죄송하지만 시간나실때 양극분체 스태커 2호기 Hoist Time Over Error 한번만 봐주시면 감사 하겠습니다.
March 7, 2025 at 6:15 PM, Baek Hojong(백호종)FA: 네 알겠습니다
March 7, 2025 at 6:15 PM, 윤경환: 감사 합니다.

Chunk 789:
March 7, 2025 at 6:43 PM, Baek Hojong(백호종)FA: @윤경환 조장님 분체 양극 크레인 2호기 조치되었고 입고포트에 있는 화물까지 창고에 들어갔습니다 현재는 정상대기 상태입니다 참고하세요
March 7, 2025 at 6:43 PM, 윤경환: 네 감사 합니다!
March 8, 2025 at 6:01 AM, Szabadi Miki invited Oláh András.

Chunk 790:
March 8, 2025 at 6:20 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:11/13 Overtime (0): - Sick (1):Béki Norbert Holiday (0):- Shift change(1): Novák Károly Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(5): Zsurbej Zsolt, Nagy Zsolt Novák Zoltán, Kasztel Balázs Hufnágel Dániel Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 791:
March 8, 2025 at 12:24 PM, Varga Zoltán: I pushed the LR button on powder anode line#3 and #4 and only 1 material came out from warehouse. Can you help please?
March 8, 2025 at 12:25 PM, Mohammad Amir: Please tell me equipment id ,I will check ! Thank you very much!
March 8, 2025 at 12:26 PM, Szabadi Miki: E1PLA041_P01, P02
March 8, 2025 at 12:26 PM, Dániel Hufnágel: Two port ere disable! Now i activate them
March 8, 2025 at 12:27 PM, Dániel Hufnágel: Material coming

Chunk 792:
March 8, 2025 at 12:27 PM, Varga Zoltán: They are coming now thank you
March 8, 2025 at 12:27 PM, Mohammad Amir: Materials on the way for both ports. Thank you very much!
March 8, 2025 at 6:11 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.08 Time: 18:00–06:00 1. Baek hojong 2. Jung woojun 3. Noemi Köszönöm szépen
March 8, 2025 at 9:43 PM, Zagyva Tamás invited Mucsenbacher_Jozsef.
March 8, 2025 at 9:43 PM, Zagyva Tamás: .

Chunk 793:
March 9, 2025 at 6:04 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:12/13 Overtime (0): - Sick (1):Béki Norbert Holiday (0):- Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Zoltán, Kasztel Balázs Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 9, 2025 at 7:07 AM, Varga Zoltán: Hi, please release 1 palett 112-00249A to port P07 on Powder site 1F thank you

Chunk 794:
March 9, 2025 at 7:08 AM, Mohammad Amir: Hello, Working on it
March 9, 2025 at 7:14 AM, Mohammad Amir: Material has been successfully transferred. ✅ Please collect it from the P07. Thank you very much!
March 9, 2025 at 7:15 AM, Varga Zoltán: Thank you
March 9, 2025 at 7:15 AM, Mohammad Amir: You are welcome!
March 9, 2025 at 9:00 AM, Janos R. MX SL: Hello please release 6 pallets of 111-00163A Umicore from the Warehouse. Powder 1F @Dániel Hufnágel légyszíves küldj segítséget a leszedéshez.

Chunk 795:
March 9, 2025 at 9:00 AM, Mohammad Amir: Hello , Working on it!
March 9, 2025 at 9:02 AM, Dániel Hufnágel: Nem sokára érkeznek
March 9, 2025 at 9:05 AM, Mohammad Amir: I have transferred all the requested Materials successfully ✅. Please collect it from the CNVC12_P07. Thank you very much!
March 9, 2025 at 9:05 AM, Mohammad Amir: @Szabadi Miki @FA Please check E0CNVC12_P07 ,it is currently OOS that's why created material transfer jobs are Alternated. Thank you very much!

Chunk 796:
March 9, 2025 at 9:08 AM, Szabadi Miki: Checking
March 9, 2025 at 9:09 AM, Mohammad Amir: Thank you very much!
March 9, 2025 at 9:36 AM, Szabadi Miki: You are welcome, it is working
March 9, 2025 at 9:37 AM, Mohammad Amir: Thank you very much! Transfer has initiated, Materials are arriving on P07. ✅
March 9, 2025 at 9:43 AM, Janos R. MX SL: @Mohammad Amir I requested 111-00163A, but we get 111-00169A. Can you check it?
March 9, 2025 at 9:43 AM, Mohammad Amir: Checking

Chunk 797:
March 9, 2025 at 9:44 AM, Janos R. MX SL: @Powder tréner légyszíves ellenörizzétek le mégegyszer ti is az anyagot.
March 9, 2025 at 9:46 AM, Varga Zoltán: Eddig 4 jött ki mind 169A 4M sárga papírral
March 9, 2025 at 9:56 AM, Janos R. MX SL: @Mohammad Amir Did you find it?
March 9, 2025 at 10:03 AM, Mohammad Amir: This message was deleted.

Chunk 798:
March 9, 2025 at 10:03 AM, Mohammad Amir: Currently there is no material available for 111-00163A which I can transfer. There are two materials however it is not transferable because of expiry date filter. Thank you very much!
March 9, 2025 at 10:05 AM, Janos R. MX SL: @장영환(Younghwan Chang) @Iván Hegedus @동진 Can you look after this, we need normal material for 4th Test batch on the Cathode side.
March 9, 2025 at 10:05 AM, 장영환(Younghwan Chang): Normal umicore changed to 111-00169A From this year

Chunk 799:
March 9, 2025 at 10:05 AM, 윤경환: We released 164A 5 pallet for this 4M production.
March 9, 2025 at 10:06 AM, 윤경환: *169A
March 9, 2025 at 10:09 AM, Janos R. MX SL: We need a list of which material changed in the production lines its so confusing I hasn't got information this changes, running empty roundes.
March 9, 2025 at 10:20 AM, Janos R. MX SL: @Dániel Hufnágel köszönöm akkor nem kell további anyagot kivenni. Megoldodott a probléma.

Chunk 800:
March 9, 2025 at 10:24 AM, Dániel Hufnágel: Mai napon egyáltalán nem kell?
March 9, 2025 at 10:28 AM, Janos R. MX SL: Ezt így nem merném mondani, jelen pillanatban megvan mindenünk ami kell.
March 9, 2025 at 10:28 AM, Dániel Hufnágel: Okés
March 9, 2025 at 10:28 AM, Dániel Hufnágel: Rendben
March 9, 2025 at 10:10 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.09 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 801:
March 10, 2025 at 6:16 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/12 Tech, 0Sl Overtime(0): - Holiday(2): Kovács Ágnes, Radics András Sick(0): - --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy (4): Böröczky Balázs, Pintye Miklós László, Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 802:
March 10, 2025 at 9:21 AM, 윤경환: @FA 금요일에 리딩이 안되어서 포일 1릴 안들어갔는데 그대로 남아 있네요. 확인 부탁 드립니다.
March 10, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA: 위치가 어디일까요?
March 10, 2025 at 9:22 AM, KIM SEYEON [김세연]_FA: 자재쪽 위치인가요? 클린룸쪽 위치인가요?
March 10, 2025 at 9:22 AM, 윤경환: 자재쪽 입니다.
March 10, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA: @Szücs Géza FT-B please check this
March 10, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA: @Lili 번역부탁해요
March 10, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA: Photo

Chunk 803:
March 10, 2025 at 9:35 AM, Szücs Géza FT-B: @Lili @🌌Lilla(한소라)🌠 kérek szépen fordítást, mert nem értem, fordítottam magyarra is meg angolra is, de nem értem mire gondol és hol.
March 10, 2025 at 9:48 AM, Koncz Tamás: Lili van egyedül de ő most Secu oktatáson van!
March 10, 2025 at 9:49 AM, Szücs Géza FT-B: és te érted hogy mit és hol szeretne az úr?
March 10, 2025 at 9:49 AM, Szücs Géza FT-B: szegény

Chunk 804:
March 10, 2025 at 9:51 AM, Lili: Van egy péntekről megmaradt fólia, ami nem lett beolvasva, ezért nem ment be. Még mindig úgy van hagyva. Kérlek, ellenőrizzétek le.
March 10, 2025 at 9:52 AM, Lili: Az anyag oldalon van
March 10, 2025 at 9:53 AM, Lili: Azt kérdezte, hogy a clean roomban van-e, vagy az anyag oldalon, azt válaszolta, hogy az anyag oldalon.
March 10, 2025 at 10:01 AM, Szücs Géza FT-B: ahha, de hol? ez a poros csoport, nem? az E0STK001 vagy 002 -re gondol?

Chunk 805:
March 10, 2025 at 10:02 AM, Lili: Igen poros csoport. Megkérdezem, hol a pontos hely.
March 10, 2025 at 10:02 AM, Lili: 혹시 정확한 위치가 E0STK001 아니면 002인가요? @윤경환
March 10, 2025 at 10:04 AM, 윤경환: STK002쪽이긴 한데 자재투입부 쪽 입니다. 포트가 4개 있는데, 왼쪽 부터 1번이라고 하몆 4번 케리어에 포일 올려져 있습니다.
March 10, 2025 at 10:05 AM, 윤경환: *하면
March 10, 2025 at 10:06 AM, Lili: Az STK002 oldalról van szó ugyan, de az anyagbetöltési rész oldalán van. 4 db port van, ha balról számoljuk az elsőt, akkor a 4. Carriernél van fent a fólia.

Chunk 806:
March 10, 2025 at 10:10 AM, Szücs Géza FT-B: ez tiszta téren belül van vagy kívül?
March 10, 2025 at 10:16 AM, Fábián Anna 언너: A tiszta téren kívül.
March 10, 2025 at 10:17 AM, Szücs Géza FT-B: akkor 30-40 perc és ott vagyok, megnézem
March 10, 2025 at 10:18 AM, Lili: 네 그럼 30분~40분 안에 가서 확인해보겠습니자.

Chunk 807:
March 10, 2025 at 11:02 AM, Szücs Géza FT-B: @Lili 3 probléma volt: 1. nem tudtak belépni az STK002 PC-be, mert be volt nyomva a numlock 2. STK002 bemeneti portján egy szenzor lötyögött, ezért nem látta a fóliát 3. Kézi Vonalkód olvasót újra kellett indítani, mert nem olvasta be a fólia ID-t
March 10, 2025 at 11:11 AM, Lili: 3가지 문제가 있었습니다. 1. STK002 PC에 ‘numlock’이 활성화되어 있어서 로그인 불가였습니다. 2. STK002 입고 포트에서 센서 하나가 흔들려서 포일을 감지하지 못했습니다. 3. 수동 바코드 리더가 포일 ID를 읽지 못 하여 재가동해야 했습니다.

Chunk 808:
March 10, 2025 at 6:07 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 809:
March 10, 2025 at 6:08 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.10 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 11, 2025 at 6:12 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.11 Time: 06:00–18:00 1. Baek Hojong Köszönöm szépen

Chunk 810:
March 11, 2025 at 6:12 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 12/12 Tech, 1Sl Overtime(0): - Holiday(0): Sick(0): - --------------- Electrode(4): Rácz Dániel, Radics Anrás, Pálosi Róbert, Czeilinger Krisztián, --------------- Assy (5): Böröczky Balázs, Kovács Ágnes, Pintye Miklós László, Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 811:
March 11, 2025 at 9:08 AM, Yoon: @KIM SEYEON [김세연]_FA @유병일 제가 오전에 이전에 발생하였던 양극 분체 이동걸림 문제로 메일 전달드렸습니다. 관련 메일 확인하시여 협력사에 점검 부타개
March 11, 2025 at 9:08 AM, Yoon: 점검 부탁드려요
March 11, 2025 at 9:08 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다
March 11, 2025 at 9:09 AM, Yoon: 넵 감사합니다
March 11, 2025 at 9:42 AM, Schmidt Dávid: This message was deleted.

Chunk 812:
March 11, 2025 at 11:21 AM, Powder tréner: FA segítséget szeretnék kérni. VC02 őt blokkolja valamiért a VC03 as AGV és így nem tudja be vinni a területre az anyagot. Rá tudnátok nézni? @FA
March 11, 2025 at 11:23 AM, Szücs Géza FT-B: Persze, VC01 kézi töltőn van, lemerült az út közepén. az blokkolja a 3ast
March 11, 2025 at 11:24 AM, Powder tréner: Igen azt látom. Azt valahogy arrébb tudjátok mozgatni hogy ne akadályozza egyik AGV-t sem?

Chunk 813:
March 11, 2025 at 11:24 AM, Csanálosi Gábor FA: 8p és érkezünk
March 11, 2025 at 11:25 AM, Powder tréner: Rendben Köszönöm
March 11, 2025 at 11:35 AM, Szücs Géza FT-B: Készen van, Gabival megcsináltuk
March 11, 2025 at 11:45 AM, Powder tréner: Vissza tudtok jönni? (sobs) a CV3 as AGV megállt a porton és nem mozdul semerre
March 11, 2025 at 11:46 AM, Szücs Géza FT-B: megyek
March 11, 2025 at 11:46 AM, Powder tréner: Köszi
March 11, 2025 at 11:56 AM, Szücs Géza FT-B: kész

Chunk 814:
March 11, 2025 at 11:56 AM, Powder tréner: Köszi szépen
March 11, 2025 at 2:44 PM, KIM SEYEON [김세연]_FA: @장영환(Younghwan Chang) @주범진 PM님 Please share powder production plan in this week.
March 11, 2025 at 5:55 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.11 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 815:
March 11, 2025 at 6:18 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(1): Göltl Noémi

Chunk 816:
March 11, 2025 at 10:59 PM, Powder tréner: Sziasztok!Poron megált 1 AGV.Nem mozdul semerre és nem engedi másik AGV nek leszedni az anyagot.
March 11, 2025 at 11:06 PM, Mr.Miti (미티) FA: Megyünk
March 12, 2025 at 6:05 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.12 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen

Chunk 817:
March 12, 2025 at 6:20 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:12/13 Overtime (0): - Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 818:
March 12, 2025 at 10:01 AM, Janos R. MX SL: Sziasztok! Good morning we like to request 25 palett Normal umicore 111-00169A to Powder 1F @Dániel Hufnágel kérnénk segítséget a levételéhez
March 12, 2025 at 10:02 AM, Szabadi Miki: Megyünk
March 12, 2025 at 10:05 AM, Shakir (MCS): Good morning For this 111-00169A definition code, there is NO LOT AVAILABLE. Thank you

Chunk 819:
March 12, 2025 at 10:09 AM, Janos R. MX SL: @주범진 Can you help me which active material I has to requesting this production? For Hyundai production
March 12, 2025 at 10:17 AM, 윤경환: @주범진 피엠님 안녕하세요. 금일 603 음극 생산 하신다고 하시지 않으셨나요?
March 12, 2025 at 10:17 AM, 주범진: Hello Janos, Procedure team is releasing now, i will let you know after releasing finish
March 12, 2025 at 10:42 AM, Baek Hojong(백호종)FA: @주범진 피엠님 분체 양극 AGV 준비되었습니다 지금 이후부터 생산시 설비에서 LR요청해도 되니깐 전달 부탁드립니다

Chunk 820:
March 12, 2025 at 11:18 AM, Baek Hojong(백호종)FA: @주범진 피엠님 분체 설비내 LR만 사용 부탁드렸는데 작업자가 실수로 UR을 누른것 같습니다 참고로 LR만 사용가능하도록 작업자분들께 요청부탁드립니다
March 12, 2025 at 11:20 AM, 장영환(Younghwan Chang): UR은 아예 의미 없는 기능인거죠?
March 12, 2025 at 11:21 AM, Lili: Kérlek, csak az LR-t használjátok a termeléses gépen. Úgy tűnik, valaki az UR-t nyomja. Biztosítsátok, hogy csak az LR legyen használva.
March 12, 2025 at 11:22 AM, Baek Hojong(백호종)FA: 파레트 회수 UR 사용할 예정이나 아직은 LR만 부탁드립니다 피엠님

Chunk 821:
March 12, 2025 at 11:23 AM, Varga Zoltán: Rendben, de úgy tűnik az LR nem működik
March 12, 2025 at 11:24 AM, Lili: 알겠습니다만 LR이 작동하지 않는 것 같습니다.
March 12, 2025 at 11:26 AM, 주범진: 감사합니다 @Janos R. MX SL we can use cathode Agv from now on. Umicore just released
March 12, 2025 at 11:37 AM, Sazzad Bhai SKon: Yes thank you, 143 pallets available now
March 12, 2025 at 11:42 AM, 윤경환: Umicore PS111-2412100089 ( 500kg ) Please check it.
March 12, 2025 at 11:44 AM, Sazzad Bhai SKon: Available

Chunk 822:
March 12, 2025 at 12:05 PM, Varga Zoltán: E1PLC031-P01 portnál hiába nyomom a LR gombot nem történik semmi
March 12, 2025 at 12:06 PM, Varga Zoltán: Meg tudná nézni valaki légyszives, köszönöm
March 12, 2025 at 12:06 PM, Janos R. MX SL: E1PLC031-P01 포트에서 LR 버튼을 눌러도 아무 일도 일어나지 않습니다.
March 12, 2025 at 12:11 PM, 주범진: @Mr.Miti (미티) FA please help
March 12, 2025 at 12:11 PM, Dániel Hufnágel: Miki megy vissza fel, kis türelmet kérünk
March 12, 2025 at 12:12 PM, Varga Zoltán: Köszönöm szépen

Chunk 823:
March 12, 2025 at 12:59 PM, Janos R. MX SL: Photo
March 12, 2025 at 1:00 PM, Koncz Tamás: Agv fail?
March 12, 2025 at 1:00 PM, Dániel Hufnágel: Ha ez az 1 AGV akar lenni igen egy koreai szétbombázta
March 12, 2025 at 1:01 PM, Baek Hojong(백호종)FA: Rendelés érkezett, és az AGV intézkedik, ezért kérjük, várjon egy kicsit.
March 12, 2025 at 1:01 PM, Molnár Ferenc: Helló! A földszinten a katód oldalon meg állt az automata raktár. Hibakód (F0582) (CV10-011) Pallette Abnormal Position Alarm

Chunk 824:
March 12, 2025 at 1:04 PM, Dániel Hufnágel: Hamarosan érkezünk
March 12, 2025 at 1:04 PM, Janos R. MX SL: Next time If somebody repearing the AGV please move it away for path because, we need start the production Cathode line
March 12, 2025 at 1:05 PM, Janos R. MX SL: 다음에 AGV를 repearing 누군가 경로를 위해 멀리 옮기십시오, 왜냐하면 우리는 생산 음극 라인을 시작해야하기 때문입니다
March 12, 2025 at 1:05 PM, Dániel Hufnágel: Sajnos még mi sem kapunk ezekről információt, folyamatosan szenvedünk ezzel a hibaval

Chunk 825:
March 12, 2025 at 1:54 PM, Baek Hojong(백호종)FA: @Sazzad Bhai SKon E0CNVC12_P04 Carrier ID PS111-2412120183 Dest location 2110 Check please RTV not moving
March 12, 2025 at 1:58 PM, Sazzad Bhai SKon: This message was deleted.
March 12, 2025 at 2:01 PM, Sazzad Bhai SKon: Hello PM, Transport order is normal from MCS. Transfer initiated but RTV not taking the pallet. @CCS @CIM Please confirm the RTV status. Thank you

Chunk 826:
March 12, 2025 at 2:24 PM, Baek Hojong(백호종)FA: PS111-2412120183 Find out who issued the return order
March 12, 2025 at 2:32 PM, Shakir (MCS): UserId is : oa00139 at 14:20
March 12, 2025 at 2:51 PM, Varga Zoltán: AGV a katód air showerben poron hibára állt a többit akadályozza segítséget szeretnék kérni
March 12, 2025 at 2:51 PM, Szabadi Miki: Megyünk
March 12, 2025 at 3:00 PM, Varga Zoltán: Koreai kolléga visszaért és megcsinálta
March 12, 2025 at 3:00 PM, Szabadi Miki: Köszi

Chunk 827:
March 12, 2025 at 3:01 PM, Varga Zoltán: Én köszönöm
March 12, 2025 at 3:10 PM, Molnár Ferenc: Helló! A földszinten a katód oldalon meg állt az automata raktár. Ugyan úgy meg állt az CV10-011 nél
March 12, 2025 at 3:10 PM, Dániel Hufnágel: Egy kis türelmet kérünk
March 12, 2025 at 3:14 PM, Baek Hojong(백호종)FA: Done
March 12, 2025 at 3:25 PM, 윤경환: @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA 피엠님들 안녕하세요. 양극 분체창고 RTV 에서 스태커 컨베이어 이동중 걸림 현상 발생 했습니다. 제가 조치 할까요? 아님 현상 대기 할까요?

Chunk 828:
March 12, 2025 at 3:27 PM, Baek Hojong(백호종)FA: 지금 내려갈께요
March 12, 2025 at 3:27 PM, 윤경환: 네네
March 12, 2025 at 4:13 PM, Varga Zoltán: Betöltés szünetel mert a raktárból nem jön ki az alapanyag. Por katód oldalon
March 12, 2025 at 4:32 PM, Szabadi Miki: Megyünk megnézzük
March 12, 2025 at 4:34 PM, Varga Zoltán: Maradjatok csak, koreai kollégák intézik
March 12, 2025 at 4:34 PM, Szabadi Miki: Okés köszi
March 12, 2025 at 4:37 PM, Baek Hojong(백호종)FA: Solved

Chunk 829:
March 12, 2025 at 5:50 PM, Baek Hojong(백호종)FA: @종일 @강기훈 분체 양극 AGV 2,3호기 파우더룸내 에러로 멈추어 있습니다 혹시 AGV 담당자분 조치중이실까요?
March 12, 2025 at 5:53 PM, 종일: 제가 파우더룸에 들어왔습니다.확인해 보겠습니다.
March 12, 2025 at 6:56 PM, Powder tréner: Sziasztok a pora kérnék segítséget az egyik AVG elakadt meg nézitek
March 12, 2025 at 6:56 PM, KIM SEYEON [김세연]_FA: @Farkas Tamàs CA Powder agv has problems. please use agv in manual mode.
March 12, 2025 at 6:56 PM, KIM SEYEON [김세연]_FA: auto mode is not available.

Chunk 830:
March 12, 2025 at 6:56 PM, KIM SEYEON [김세연]_FA: AN Powder agv is okay for auto mode.
March 12, 2025 at 6:58 PM, Farkas Tamàs: Ok
March 12, 2025 at 6:59 PM, Powder tréner: Katode oldalon van gond
March 12, 2025 at 7:03 PM, Marsi Gábor: Kész
March 12, 2025 at 7:14 PM, Powder tréner: Hello! I would like to ask for these materials: 35 pallets 111-00169A (Umicore_VXQ14T) (Katod Materials) Thank you! Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm

Chunk 831:
March 12, 2025 at 7:18 PM, Shahbaz 샤바즈 MCS/RTD: Hello! We are releasing them to E0CNVC12_P07. Thank you.
March 12, 2025 at 10:31 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.12 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 12, 2025 at 10:57 PM, Skwarek Tibor: This message was deleted.

Chunk 832:
March 13, 2025 at 12:12 AM, Powder tréner: Hello I would like to request 10 more pallets of 111-00169A (Umicore_VXQ14T) (Katod Materials) Please only the requested raw material Kodal will issue from the raw material warehouse. Thank you!
March 13, 2025 at 12:19 AM, Shahbaz 샤바즈 MCS/RTD: Okay, I am releasing another 10 pallets from Ca Power warehouses. Thanks.
March 13, 2025 at 12:28 AM, Powder tréner: Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm

Chunk 833:
March 13, 2025 at 12:28 AM, Marsi Gábor: Megyek
March 13, 2025 at 12:29 AM, Marsi Gábor: Olyan rég jöttünk le
March 13, 2025 at 6:06 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.13 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen

Chunk 834:
March 13, 2025 at 6:17 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:10/13 Overtime (0): - Sick (1):Nagy Zsolt Holiday (1): Kasztel Balázs Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): Zsurbej Zsolt, Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 835:
March 13, 2025 at 6:20 AM, Powder tréner: Hello I would like to request 10 more pallets of 111-00169A (Umicore_VXQ14T) (Katod Materials) Please only the requested raw material Kodal will issue from the raw material warehouse. Thank you!
March 13, 2025 at 6:25 AM, Powder tréner: Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm
March 13, 2025 at 6:25 AM, Szabadi Miki: Nemsoká megyünk

Chunk 836:
March 13, 2025 at 6:28 AM, Shakir (MCS): I am releasing another 10 pallets from Ca Power warehouses. Thanks.
March 13, 2025 at 6:36 AM, Shakir (MCS): 10 Pallets has been successfully transferred. ✅ Please collect it from the P07. Thank you very much!
March 13, 2025 at 6:41 AM, Janos R. MX SL: Good morning, Something fishy here, we got: Umicore 311-00172M 11 palet I dont think so it's good for us. Could you check it.?

Chunk 837:
March 13, 2025 at 6:42 AM, Janos R. MX SL: if you need palett/carrier ID let me know.
March 13, 2025 at 6:43 AM, Shakir (MCS): I released all 10 pallets with this information like definition id 111-00169A.
March 13, 2025 at 6:43 AM, Shakir (MCS): Yes please
March 13, 2025 at 6:44 AM, Janos R. MX SL: But from the warehouse came different out material with Different ID
March 13, 2025 at 6:44 AM, Janos R. MX SL: Give me a sec
March 13, 2025 at 6:45 AM, Shakir (MCS): Please provide pallet id

Chunk 838:
March 13, 2025 at 6:47 AM, Varga Zoltán: Please give me PS111-2501020024
March 13, 2025 at 6:50 AM, Shakir (MCS): As per RTD carrier Information the pallet material type is 111-00169A which is requested.
March 13, 2025 at 6:53 AM, Varga Zoltán: We use this item code for production
March 13, 2025 at 6:59 AM, Janos R. MX SL: we had a miss communication, our trainer is soon providing a list of 311-00172M what is came out at night and now.

Chunk 839:
March 13, 2025 at 7:01 AM, Janos R. MX SL: But I can give you a sample PS311-2501030174 this is first what you send its on Port now. Item code is 311-00172M
March 13, 2025 at 7:02 AM, Shakir (MCS): You need only with start with PS111-250??
March 13, 2025 at 7:05 AM, Shakir (MCS): Both the pallets start with PS311-250..and PS111-250…under same lot which have product definition ID 111-00169A. Thank you

Chunk 840:
March 13, 2025 at 7:05 AM, Varga Zoltán: At night we got PS311-2501030165 163 164 166 167 168 169 173 172 170 171 PS311-2501130043
March 13, 2025 at 7:06 AM, Varga Zoltán: These are with 311-00172M item code
March 13, 2025 at 7:07 AM, Janos R. MX SL: yes I see now in MES.
March 13, 2025 at 7:10 AM, Janos R. MX SL: I talk with my colleagues please wait I write yiu back if I got answer.
March 13, 2025 at 7:11 AM, Shakir (MCS): Yes sure, Thank you

Chunk 841:
March 13, 2025 at 7:19 AM, Szabadi Miki: @Shakir (MCS) Hello, we would like to request that the pallets that have been issued, so far should be returned to the warehouse?
March 13, 2025 at 7:21 AM, Shakir (MCS): Do you mean this pallets?
March 13, 2025 at 7:21 AM, Szabadi Miki: Yes, this paletts not needed for production
March 13, 2025 at 7:22 AM, Szabadi Miki: Not this , the first 10 paletts
March 13, 2025 at 7:23 AM, Janos R. MX SL: Miki várj. Ne küldesd vissza.

Chunk 842:
March 13, 2025 at 7:23 AM, Shakir (MCS): We wait
March 13, 2025 at 7:23 AM, Szabadi Miki: Akkor azt is szedjük le ?
March 13, 2025 at 7:24 AM, Janos R. MX SL: Megprobálok elérni valakit
March 13, 2025 at 7:24 AM, Szabadi Miki: Okés akkor várakozunk amig nincs info

Chunk 843:
March 13, 2025 at 7:30 AM, Janos R. MX SL: @주범진 @장영환(Younghwan Chang) Could you solve our problem, In the 111-00169A materials whats is came out from storage, some of the pallets has 311-0172M label, these pallets in MES shows 111-0169A, the guys holds back these pallets from production
March 13, 2025 at 7:34 AM, 윤경환: Hello. In this production, the item code 311-00172M has been changed to 111-00169A.

Chunk 844:
March 13, 2025 at 7:36 AM, Janos R. MX SL: thank you. Leszedhetitek és felhasználhatjátok @Varga Zoltán @Szabadi Miki
March 13, 2025 at 7:36 AM, Szabadi Miki: Oké rendben akkor csináljuk
March 13, 2025 at 7:41 AM, Janos R. MX SL: @주범진 please update your email about production material changes. Thank you.
March 13, 2025 at 7:53 AM, 주범진: Hello We can just use that 111-00169, regardless of 311-00172code

Chunk 845:
March 13, 2025 at 8:02 AM, Janos R. MX SL: Okay it's fatal mistake in MES, if the guys doesn't check the label, they can dumping into hopper.
March 13, 2025 at 8:04 AM, 장영환(Younghwan Chang): If the barcode scanning show OK, We can use it
March 13, 2025 at 8:06 AM, Janos R. MX SL: használhatjátok Zoli.
March 13, 2025 at 8:07 AM, Janos R. MX SL: @Varga Zoltán
March 13, 2025 at 8:10 AM, Varga Zoltán: Thank you

Chunk 846:
March 13, 2025 at 11:35 AM, Molnár Ferenc: Helló! A földszinten a katód oldalon meg állt az automata raktár. Meg állt az CV10-011 nél
March 13, 2025 at 11:53 AM, Baek Hojong(백호종)FA: @장영환(Younghwan Chang) @주범진 피엠님 분체 음극 1F AGV동선내 페기물 및 파레트로 AGV 장애물감지로 가동불가입니다 작업자분들께 AGV동선에 딱맞게 페기물 및 공파레트 놓지 마라달라고 전달 부탁드립니다 지금 바로 정리 및 GF로 폐기물 내려달라고 말씀좀 해주시면 감사하겠습니다 제가 할려고 했는데 자동잡기 놔두고 키를 가지고 가버려서 어찌할수가 없어서요
March 13, 2025 at 12:15 PM, Oláh András: Kész
March 13, 2025 at 12:18 PM, Molnár Ferenc: Köszönöm

Chunk 847:
March 13, 2025 at 1:05 PM, 주범진: @Janos R. MX SL @Varga Zoltán Hello Can I ask you to clean up the AGV line?
March 13, 2025 at 1:20 PM, Baek Hojong(백호종)FA: @주범진 @장용완 피엠님 분체 1F 양극 AGV 자동반송 준비되었습니다 이 시간 이후부터 작업자분들 파우더 설비내 LR 자재 요청 부탁드립니다 그리고 꼭 UR은 누르지 마시라고 얘기해주세요
March 13, 2025 at 1:23 PM, 주범진: 넵 감사합니다 @Janos R. MX SL @Varga Zoltán We can use agv from now on And please educate to operators that please don't use UR button Thank you

Chunk 848:
March 13, 2025 at 1:40 PM, 윤경환: @FA @KIM SEYEON [김세연]_FA 안녕하세요 피엠님 금일 포일 창고 포일 투입 예정인데 스태커 1번 문이 열려 있네요. 혹시 무슨 작업 하시나요?
March 13, 2025 at 1:59 PM, 윤경환: @Fa 포일 창고 스태커 2번 Stopper Sensor Alarm 확인 부탁 드립니다.
March 13, 2025 at 2:11 PM, 배광근 (Ben): @FA 해당 건 확인해주시면 감사하겠습니다
March 13, 2025 at 2:16 PM, Szabadi Miki: we are on our way
March 13, 2025 at 2:27 PM, 윤경환: 포일 창고 2번 사용 하지 말라고 하셨다는데 그럼 금일 작업 못합니다...
March 13, 2025 at 3:13 PM, KIM SEYEON [김세연]_FA: @송광진PM FA장비unit 피엠님 혹시 SAT 얼마나 남았나요? 대략 시간 알려주실수 있을까요?

Chunk 849:
March 13, 2025 at 3:14 PM, 윤경환: 아까 컨베이어쪽 문제 였는데 시너스텍 분들 오셔서 확인해 주셨습니다. 지금은 작업중 입니다.
March 13, 2025 at 3:17 PM, 송광진PM FA장비unit: 포일창고는 마무리되었습니다 확인이 늦었네요
March 13, 2025 at 3:25 PM, Baek Hojong(백호종)FA: @장영환(Younghwan Chang) @주범진 피엠님 현재 분체 1F 양음극 에어샤워 전원이 off라 AGV 자동반송 불가하니 자재 필요시 수동으로 대응부탁드립니다 UT에서 점검중이니 확인되는데로 재공지 드리겠습니다

Chunk 850:
March 13, 2025 at 3:31 PM, 주범진: @Varga Zoltán @Janos R. MX SL The air shower is being checked from UT, so we need to get the materials manually if we need. Mr.beak let us know after it finished Until it's resolved, please request material from FA Thank you
March 13, 2025 at 4:23 PM, Baek Hojong(백호종)FA: @주범진 피엠님 분체 1F 양 음극 에어샤워 및 AGV 스텐바이 되어있으니 파우더 설비내 LR 명령으로 자재 불러주셔도 됩니다
March 13, 2025 at 4:44 PM, 주범진: 감사합니다 @Varga Zoltán @Janos R. MX SL We can use agv from now on again

Chunk 851:
March 13, 2025 at 6:20 PM, Powder tréner: Segítséget kérnék a Por Anod oldalon az alapanyag elekadt léci nézzétek meg
March 13, 2025 at 6:21 PM, Marsi Gábor: Megyünk
March 13, 2025 at 6:21 PM, Powder tréner: Köszi
March 13, 2025 at 6:53 PM, Farkas Tamàs: @VK (mcs) hello 1F powder CA page has a delay on port E1PLC031_P02 but STK does not bring any material. Can you check it? Thank you!
March 13, 2025 at 6:53 PM, VK (mcs): Checking

Chunk 852:
March 13, 2025 at 6:57 PM, VK (mcs): Please check conveyor E0CNVC12 Access mode is manual
March 13, 2025 at 7:02 PM, Farkas Tamàs: set back to automatic mode. thank you!
March 13, 2025 at 7:03 PM, VK (mcs): Most welcome
March 13, 2025 at 9:08 PM, Powder tréner: Segítséget kérnék a Por Katod oldalon a termelésben elekadt az egyik AVG nézzétek meg
March 13, 2025 at 9:09 PM, Marsi Gábor: Megyünk
March 13, 2025 at 9:09 PM, Powder tréner: Köszi

Chunk 853:
March 14, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 0Sl Overtime(0): - Holiday(0): - Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Pintye Miklós László --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pálosi Róbert, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 854:
March 14, 2025 at 6:39 AM, Baek Hojong(백호종)FA: Sziasztok Daily shift FA Technician Schedule Date: 2025.03.14 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen
March 14, 2025 at 9:23 AM, Powder tréner: Sziasztok. Segítséget szeretnék kérni porbetöltés Anode oldalra. LC08 light Curtain 08 detected hibára. Rá tudnátok nézni? @FA
March 14, 2025 at 9:23 AM, Powder tréner: Köszönöm
March 14, 2025 at 11:04 AM, Radics András left this chatroom.

Chunk 855:
March 14, 2025 at 11:09 AM, Baek Hojong(백호종)FA: @주범진 @장용완 피엠님 분체는 특별한 얘기 전달 없는한 양음극 화물 설비 LR요청 AGV 자동반송 계속 진행하시라고 시프트리더 이하 작업자분께 전달 부탁드립니다
March 14, 2025 at 2:33 PM, 윤경환: @FA 지금 WMS 이용하여 양극분체 GF로 출고 하려 하는데, 반응이 없습니다. 확인 부탁 드립니다.
March 14, 2025 at 2:40 PM, Baek Hojong(백호종)FA: 조장님 크레인 및 컨베어 레디상태 이상없고 크레인 작업명령이 없습니다 해당자재 출고 안되는거 문의 시스템 쪽으로 요청해보시겠어요!
March 14, 2025 at 2:59 PM, 윤경환: 네 알겠습니다.

Chunk 856:
March 14, 2025 at 4:17 PM, 윤경환: @MCS/RTD Hello! I like to request 20 pallet. Ecopro 111-00150A to the cathode GF. (PS111-2411150002~12) (PS111-2411150014~21)
March 14, 2025 at 4:18 PM, Mohammad Amir: Okay Sir, Working on it ! You would like to receive it in the GF ?
March 14, 2025 at 4:19 PM, 윤경환: Yes. Thank you.👍
March 14, 2025 at 4:19 PM, Mohammad Amir: You are welcome Sir! Working on it!

Chunk 857:
March 14, 2025 at 4:26 PM, Mohammad Amir: Dear Sir, You would like to receive only the mentioned materials id PS111-2411150002~12) (PS111-2411150014~21) Cause we have Ecopro 111-00150A total 23 material but mentioned all material id is not included in it. Should I transfer available materials ?
March 14, 2025 at 4:30 PM, Mohammad Amir: For your information:- For this carrier ids:- PS111-2411150002~12) (PS111-2411150014~21) Material type is NULL. Thank you very much!

Chunk 858:
March 14, 2025 at 4:37 PM, 윤경환: It is a materials that is not released.
March 14, 2025 at 4:43 PM, Mohammad Amir: I am realising mentioned materials to GF CNV Manual ports. Please collect it. Thank you very much!
March 14, 2025 at 4:47 PM, Mohammad Amir: All the mentioned materials have been released. ✅. Thank you very much!
March 14, 2025 at 4:47 PM, Mohammad Amir: @FA @Rácz Dániel / FA Please check E0CNVC11_M01 to "OUT" type so that created jobs can be completed. Thank you very much!

Chunk 859:
March 14, 2025 at 4:50 PM, Szücs Géza FT-B: working
March 14, 2025 at 4:50 PM, Mohammad Amir: Thank you very much!
March 14, 2025 at 4:51 PM, Szücs Géza FT-B: Nem én voltam, csak mire ránéztem ment :)

Chunk 860:
March 14, 2025 at 6:19 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 861:
March 14, 2025 at 9:20 PM, Powder tréner: Sziasztok!Poron anód oldalon megált 1AGV és nem reagál semmire. Szeretnék segítséget kérni.
March 14, 2025 at 10:01 PM, Sebestyén Dávid: Be vannak bikázva, mennek az AGV-k
March 14, 2025 at 11:33 PM, Powder tréner: Megint megált az 1 AGV
March 15, 2025 at 2:52 AM, Powder tréner: Poron E1PLA041_P02 és P01 re nem tudjuk anyagot bekérni,nem reagál a rendszer.
March 15, 2025 at 2:52 AM, Mr.Miti (미티) FA: Nekem azt írja hogy nincs elérhető anyag.

Chunk 862:
March 15, 2025 at 2:55 AM, Powder tréner: Okés,lehetséges hogy nincs workorder.
March 15, 2025 at 3:13 AM, Mr.Miti (미티) FA: Azegyesraktarbol megy az anyag
March 15, 2025 at 6:38 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.15 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom 3. Baek hojong Köszönöm szépen

Chunk 863:
March 15, 2025 at 6:42 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 0Sl Overtime(2): Kertész Kornél Dániel, Szabadi Miklós Holiday(1): Radics András Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Szabadi Miklós --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Takarítás(2): Kertész kornél Dániel, Pálo

Chunk 864:
March 15, 2025 at 7:18 AM, Powder tréner: Sziasztok segítséget szeretnék kérni porbetöltés. Anode oldali raktárban megált a CV2-es AGV Lift pos abnormális hibával. Rá tudtok nézni? Köszönöm @FA
March 15, 2025 at 7:28 AM, Kertész Dániel: Megyünk-megyünk, csak össze kell szednünk a takarításhoz szükséges dolgokat, mivel ezt kaptuk mára feladatnak😅
March 15, 2025 at 8:39 AM, Szücs Géza FT-B: E0STKA11 - FA leállította takarítás miatt

Chunk 865:
March 15, 2025 at 9:29 AM, 윤경환: @Baek Hojong(백호종)FA @문진영 안녕하세요. 지금 랩탑 챙겨서 분체 창고 이동 예정입니다. 양극 분체 창고 와주시면 감사 하겠습니다.🫡
March 15, 2025 at 9:33 AM, Baek Hojong(백호종)FA: 지금 분체 1F에 있습니다 조장님!
March 15, 2025 at 12:24 PM, Mohammad Amir: @FA @Pálosi Róbert Please check E0STKC11_C01 there is Ready off during Forking error ,created material transfer jobs are Alternated. Thank you very much!
March 15, 2025 at 12:25 PM, Szücs Géza FT-B: technicians will go, they eating at now.

Chunk 866:
March 15, 2025 at 12:26 PM, Mohammad Amir: Thank you very much! 🙏

Chunk 867:
March 15, 2025 at 6:08 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 1 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 868:
March 15, 2025 at 10:54 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Cathode Powder stocker C12 “Light curtain detected error” Thanks
March 16, 2025 at 4:12 AM, Janos R. MX SL: Sziasztok a katód oldalon a por területen valami történt az AGV-kel Beálltak egymás mellé azt vísitanak :)
March 16, 2025 at 4:20 AM, Mr.Miti (미티) FA: Beszélgetnek csak. 🤣

Chunk 869:
March 16, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9+2/12 Tech, 0Sl Overtime(2): Nagy Zsolt, Zsurbej Zsolt Holiday(2): Radics András, Boromisza Zoltán Sick(1): Czeilinger Krisztián --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (4): Böröczki Balázs, Takács Ádám, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Takarítás(2): Nagy Zsolt, Zsurbej Zsolt A technikusok elosztása változhat az elvég

Chunk 870:
March 16, 2025 at 8:56 AM, 지석범PM (이반차FA): This message was deleted.
March 16, 2025 at 8:57 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.16 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 16, 2025 at 9:30 AM, Powder tréner: Sziasztok segítséget szeretnék kérni Porbetöltés Anode oldalra ( termelésben van) CV2 -es AGV megállt a porton [M6081] left bumper detect hibával. Rá tudtok nézni? Köszönöm @FA

Chunk 871:
March 16, 2025 at 10:23 AM, Szücs Géza FT-B: végeztünk, ne rugdaljátok a bumpert llgyszives
March 16, 2025 at 11:09 AM, Szücs Géza FT-B: @Powder tréner CA oldalon van termelés?
March 16, 2025 at 11:22 AM, Powder tréner: Nincs
March 16, 2025 at 11:25 AM, Powder tréner: Sziasztok segítséget szeretnék kérni porbetöltés AGV probléma miatt. Cv3 raktárban áll hibában.
March 16, 2025 at 11:29 AM, Szücs Géza FT-B: 15 perc türelmet kérek
March 16, 2025 at 11:29 AM, Szücs Géza FT-B: vagy 10

Chunk 872:
March 16, 2025 at 11:29 AM, Powder tréner: Rendben Köszönöm.
March 16, 2025 at 5:54 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 873:
March 16, 2025 at 10:13 PM, Powder tréner: Sziasztok poron 1 AGV elvesztettem a pozíciót és áll a termelésben.Szeretnék kérni segítséget.
March 16, 2025 at 10:15 PM, Mr.Miti (미티) FA: Rendben
March 17, 2025 at 1:05 PM, Molnár Ferenc: Helló! A fólia raktár hibakódal megállt. 124. Load Collapse Error
March 17, 2025 at 1:06 PM, Viczai Tamás: Megyünk
March 17, 2025 at 1:06 PM, Molnár Ferenc: Köszönöm
March 17, 2025 at 1:07 PM, Farkas Tamàs: Kész
March 17, 2025 at 1:07 PM, Molnár Ferenc: Köszönöm

Chunk 874:
March 17, 2025 at 3:40 PM, Shakir (MCS): This message was deleted.
March 17, 2025 at 3:41 PM, Shakir (MCS): @FA Please check E0STKC11 is OOS. Control panel is Inactive. Thank you
March 17, 2025 at 4:04 PM, 윤경환: This message was deleted.
March 17, 2025 at 4:06 PM, 윤경환: @FA Please check it Anode STK 2. Error code : Load Collapse Error ( Right ).
March 17, 2025 at 4:16 PM, Simon Attila F. A.: I'm here.

Chunk 875:
March 17, 2025 at 4:16 PM, Simon Attila F. A.: The installation company carries out inspections of the cranes.
March 17, 2025 at 6:13 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.17 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen

Chunk 876:
March 17, 2025 at 6:17 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:13/13+1 SL Overtime (1): Denkó János Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Denkó János, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 17, 2025 at 6:21 PM, Varga Zoltán: Helló használhatjuk por katód oldalon az AGV -t automata módban vagy csak manuálisan?

Chunk 877:
March 17, 2025 at 6:21 PM, Dániel Hufnágel: Szia! Tudomásom szerint igen, AGV.k ha minden igaz üzemképesek!
March 17, 2025 at 6:25 PM, VK (mcs): @FA Please check Anode powder STK A12 load collapse error(right).
March 17, 2025 at 6:34 PM, Varga Zoltán: Rendben köszi
March 17, 2025 at 7:01 PM, Varga Zoltán: AGV. megállt por katód területen nézzétek meg légyszi
March 17, 2025 at 7:03 PM, Szabadi Miki: Mindjárt megyünk

Chunk 878:
March 17, 2025 at 8:58 PM, Varga Zoltán: Gyertek vissza légyszi porra, nem teszi le az anyagot az AGV. Köszönöm
March 17, 2025 at 9:01 PM, Szabadi Miki: Nemsoká megyünk
March 17, 2025 at 9:58 PM, Varga Zoltán: Megint ugyanaz, légyszi segítsetek
March 17, 2025 at 9:58 PM, Szabadi Miki: Itt vagyunk kint a raktárnál , bemegyünk
March 18, 2025 at 6:10 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.18 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 879:
March 18, 2025 at 8:55 AM, 윤경환: Anode 분체 창고에 Casio 손목 시계 분실 하신분 전극 MTSC 오피스에서 보관중 입니다. 찾아가세요.
March 18, 2025 at 1:29 PM, 윤경환: @FA 안녕하세요. 포일 창고 STK2에 포일 투입 하려다가 만재로 인해 투입이 안되어 STK1 에 투입 하려는데 SCS상에 감지 되어 있는것으로 보이는데 삭제 부탁 드립니다.
March 18, 2025 at 4:15 PM, Powder tréner: Hello! I would like to ask for these materials: 5 pallets 111-00169A (Umicore_VXQ14T) (Katod Materials) Thank you!
March 18, 2025 at 4:18 PM, (Unknown): We have initiated the transfer to E0CNVC12_P07

Chunk 880:
March 18, 2025 at 4:19 PM, Powder tréner: Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm
March 18, 2025 at 4:19 PM, Marsi Gábor: Úton vagyok
March 18, 2025 at 4:38 PM, Marsi Gábor: The material on port E0CNVC12 PO6 has no destination specified, could you give it to it?
March 18, 2025 at 4:39 PM, (Unknown): Checking
March 18, 2025 at 4:41 PM, (Unknown): The transport job was terminated by InterRail OP ACTION.
March 18, 2025 at 4:42 PM, (Unknown): This message was deleted.

Chunk 881:
March 18, 2025 at 4:44 PM, Marsi Gábor: I understand. As long as it's there, I can't download what I need! That's not the right material for this. Could you give it a destination somehow? Thank you
March 18, 2025 at 4:45 PM, (Unknown): I have given a transfer command back to warehouse
March 18, 2025 at 4:47 PM, (Unknown): Please check E0CNVC12 Ports and RTV01 They are OutOfService

Chunk 882:
March 18, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13+1 Overtime Overtime (1): Böröcz Tamás Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Nagy Zsolt, Böröcz Tamás 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 883:
March 18, 2025 at 6:24 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.18 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen

Chunk 884:
March 19, 2025 at 6:09 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9/11 Tech, 1Sl Overtime(0): Holiday(2): Pintye Miklós László, Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Denkó János --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(2): Gerbovits Kevin, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 885:
March 19, 2025 at 7:40 AM, Molnár Ferenc: Anode 분체 창고에 Casio 손목 시계 분실 하신분 전극 MTSC 오피스에서 보관중 입니다. 찾아가세요. Helló! Tegnap reggel találtunk egz Casio órát. Elektróda raktár irodában van. Hello! We found a Casio watch yesterday morning. The electrode warehouse is in the office
March 19, 2025 at 7:43 AM, 김희용 invited 동현.
March 19, 2025 at 7:43 AM, 김희용: .
March 19, 2025 at 2:16 PM, Varga Tamás Powder: Sziasztok a poron katod oldal az airshowerben megállt a robot. Tudnátok segíteni? Köszönöm

Chunk 886:
March 19, 2025 at 2:25 PM, Szücs Géza FT-B: kész
March 19, 2025 at 2:33 PM, Szücs Géza FT-B invited Szabó Zoltán János.
March 19, 2025 at 2:34 PM, Szücs Géza FT-B: @Szabó Zoltán János szia, poros hibákat légyszives itt jelezzétek, köszönjük szépen
March 19, 2025 at 2:34 PM, Szücs Géza FT-B: elméletben mindkét oldalon minden hibát elhárítottam, kérlek ellenőrizd
March 19, 2025 at 2:35 PM, Szabó Zoltán János: Szia. Rendben. Koszonom.

Chunk 887:
March 19, 2025 at 2:57 PM, 유병일: @fa tech please check the an powder agv #1 in the room. the agv is block ing other agvs
March 19, 2025 at 3:04 PM, Szücs Géza FT-B: I go
March 19, 2025 at 3:20 PM, Szücs Géza FT-B: WorkKing AgAin 👑🫡
March 19, 2025 at 3:23 PM, Szabó Zoltán János: Katodon is raneztek legyszi. Ott is megallt a robot.
March 19, 2025 at 3:26 PM, 유병일: thank you!
March 19, 2025 at 3:43 PM, Szücs Géza FT-B: kész, remélem jó is marad

Chunk 888:
March 19, 2025 at 4:14 PM, Szücs Géza FT-B: azóta volt még 2 hiba
March 19, 2025 at 6:12 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(7): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás

Chunk 889:
March 19, 2025 at 6:45 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.19 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 19, 2025 at 8:50 PM, Balogh Ádám: Sziasztok porra kellene segítség tudnátok jönni? Tobb AGV is megállt Anodon es katodon is, katodon áttérünk kézi anyagmozgatásra
March 19, 2025 at 8:52 PM, Mr.Miti (미티) FA: Szia! Persze megyünk megnézzük! A kézi anyagmozgatást hogy gondolod ?

Chunk 890:
March 19, 2025 at 8:53 PM, Balogh Ádám: Úgy értve hohy majd kérjük az anyagot es nektek kellene levenni
March 19, 2025 at 8:54 PM, Mr.Miti (미티) FA: Ezt egyenlőre nem tehetjük meg mert felsőbb utasításra tiltva van.
March 19, 2025 at 8:57 PM, Balogh Ádám: Erről nem tudtam, mióta van ez tiltva ?
March 19, 2025 at 8:58 PM, Mr.Miti (미티) FA: Amióta automata üzemben vannak az agvk.
March 19, 2025 at 8:59 PM, Balogh Ádám: En erre gondoltam ezt tegnap meg lehetett akkor ezt sem lehet ?

Chunk 891:
March 19, 2025 at 9:01 PM, Mr.Miti (미티) FA: Utolsó infom hogy nem lehet. De mint tudjuk itt mindig minden változik. Kis türelmet. Közben érkezni fognak a technikusok.
March 19, 2025 at 9:03 PM, Balogh Ádám: Rendben és ezt ki tiltotta le ?
March 19, 2025 at 9:03 PM, Mr.Miti (미티) FA: Nyilván a vezetőség én felől jön az utasítás
March 19, 2025 at 9:03 PM, Mr.Miti (미티) FA: *vezetőségem

Chunk 892:
March 19, 2025 at 9:05 PM, Balogh Ádám: Csak azert nem értem ezt mert eddig folyamatosan igy volt legalabbis elég sűrűn
March 19, 2025 at 9:09 PM, Mr.Miti (미티) FA: Akkor lehetett amikor az agv nem ment automataban. Ami az elmúlt időszakot tenkintve elég gyakran előfordult. Ha sok velük a gond akkor van rá lehetőség.

Chunk 893:
March 19, 2025 at 9:12 PM, Balogh Ádám: Rendben, nekünk mindenképp kell az anyag mert ettől függ a Coating indulása úgyhogy ha az AGV-t nem lehet működésre bírni akkor kéziben kell kikernünk.
March 19, 2025 at 9:14 PM, Mr.Miti (미티) FA: Persze ezt megértem! Ha úgy van akkor megyünk szedjük kezébe de amíg lehetséges addig agvt kell használnunk.
March 19, 2025 at 9:14 PM, Balogh Ádám: Okés rendben
March 19, 2025 at 10:17 PM, Baek Hojong(백호종)FA: Solved

Chunk 894:
March 19, 2025 at 10:27 PM, Balogh Ádám: Köszönöm
March 20, 2025 at 3:18 AM, Powder tréner: Sziasztok,szeretnék kérni segítséget. Poron Katód oldalon megált AGV 2 és nem találja pozíciót.
March 20, 2025 at 5:32 AM, Powder tréner: KATOD poron E1PLC031_P01-re automata raktár nem adja ki az anyagot. Kék lámpa világít.
March 20, 2025 at 5:37 AM, Mr.Miti (미티) FA: @Shahbaz 샤바즈 MCS/RTD please check avaible materials.

Chunk 895:
March 20, 2025 at 5:39 AM, Shahbaz 샤바즈 MCS/RTD: There is no lot available at the moment.
March 20, 2025 at 5:39 AM, Mr.Miti (미티) FA: Thank you!
March 20, 2025 at 6:22 AM, Varga Tamás Powder: good morning. CATHOD powder E1PLC031_P01 automatic warehouse does not dispense the material. Blue light is on. how much material is in the automatic warehouse?

Chunk 896:
March 20, 2025 at 6:22 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 1Sl Overtime(0): Holiday(1): Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Pintye Miklós László --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Gerbovits Kevin, Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 897:
March 20, 2025 at 6:23 AM, Szücs Géza FT-B: olvass vissza kérlek, 05:32
March 20, 2025 at 6:27 AM, Mohammad Amir: Checking
March 20, 2025 at 6:28 AM, Mohammad Amir: Good morning,There is no material available currently. Thank you!
March 20, 2025 at 9:45 AM, Varga Tamás Powder: Sziasztok. A Robot a területen várakozó állásban van a másik kint a raktárban van várakozó állásban. A raktárból így nem hozza az anyagot. Megtudnátok nézni? Köszönöm

Chunk 898:
March 20, 2025 at 9:46 AM, Mohammad Amir: Hello, Please tell me for which equipment you ordered material,I will check. Thank you very much!
March 20, 2025 at 9:47 AM, Szabó Zoltán János: Powder
March 20, 2025 at 9:47 AM, Mohammad Amir: Please tell me is it Cathode or Anode? Thank you!
March 20, 2025 at 9:48 AM, Szabó Zoltán János: Cathode
March 20, 2025 at 9:48 AM, Szücs Géza FT-B: megyünk

Chunk 899:
March 20, 2025 at 9:51 AM, Mohammad Amir: @Szücs Géza FT-B Please check material is waiting on P07 CNVC12 , however AGV is not being assigned. Thank you!
March 20, 2025 at 9:56 AM, Szücs Géza FT-B: Az AGVvel van gond, úton vagyok
March 20, 2025 at 10:07 AM, Szücs Géza FT-B: telepítő cég meetingel az airshowerben XD
March 20, 2025 at 10:28 AM, Szücs Géza FT-B: egy AGV úton
March 20, 2025 at 10:28 AM, Mohammad Amir: AGV#2 on the way. Thank you!

Chunk 900:
March 20, 2025 at 10:29 AM, Szücs Géza FT-B: hát eztet mondottam én is he 🤣
March 20, 2025 at 10:32 AM, Szücs Géza FT-B: @Szabó Zoltán János megy a következő is menne, de az air shower melletti raklap néha megzavarja az AGV-ket. el lehet tenni valahova?
March 20, 2025 at 10:35 AM, Varga Tamás Powder: Megyek
March 20, 2025 at 10:35 AM, Szabó Zoltán János: Intezzuk, koszonom
March 20, 2025 at 10:43 AM, Szücs Géza FT-B: CA Line3-nál AGV nem tud eljutni a célportra, mert előtte van valami vagy valaki

Chunk 901:
March 20, 2025 at 1:39 PM, Varga Tamás Powder: Sziasztok a poron anod 1-es sornál az AGV kicsúszott az útvonalról és az anyagot se teszi le. Valaki megtudná nézni? Köszönöm
March 20, 2025 at 1:40 PM, Szücs Géza FT-B: megyek
March 20, 2025 at 1:41 PM, Szabó Zoltán János: Koszonom
March 20, 2025 at 1:42 PM, Szücs Géza FT-B: am CA oldalon nincs fent telepítő céges dolgozó? :)
March 20, 2025 at 1:47 PM, Szabó Zoltán János: Most jovok szolni nekil pont

Chunk 902:
March 20, 2025 at 1:47 PM, Szücs Géza FT-B: már itt vagyok a liftnél GFen XD
March 20, 2025 at 1:48 PM, Szabó Zoltán János: Ne oltozz be jo a kollega
March 20, 2025 at 1:49 PM, Szabó Zoltán János: Bocsi, Most tudtam en is oda menni hozza, pont meloba voltam azert nem tudtam egybol menni.
March 20, 2025 at 1:53 PM, Szabó Zoltán János: Megoldottuk a telepitovel. Koszonom
March 20, 2025 at 1:55 PM, Szücs Géza FT-B: sarokban a cucc útban van az AGVnek

Chunk 903:
March 20, 2025 at 2:02 PM, Szabó Zoltán János: Azt arrebb vittem
March 20, 2025 at 2:34 PM, KIM SEYEON [김세연]_FA: @장영환(Younghwan Chang) @Szabó Zoltán János FA team needs to check an powder 1f rtv machine. Does electrode team have plan to produce anode powder until tonight? if not I want to check the machine now. please reply.
March 20, 2025 at 2:35 PM, 장영환(Younghwan Chang): 얼마나 걸리나요?

Chunk 904:
March 20, 2025 at 2:40 PM, Szabó Zoltán János: At now powder anod 2 loading. Anod 1 line, there is a problem. Dust collector is full. The technician have to change the big bag and the filters.
March 20, 2025 at 2:40 PM, 이승엽: 스페어 존에서 점검 가능할거 같습니다. 설비 비가동 없이 작업 예정입니다. 확인 감사 드리며, 혹시라도 알람이 발생 시 바로 조치하도록 하겠습니다.
March 20, 2025 at 2:43 PM, Szabó Zoltán János: I think anod 1 line it will stop until evening.
March 20, 2025 at 2:52 PM, 장영환(Younghwan Chang): Technicians are changing now?

Chunk 905:
March 20, 2025 at 2:55 PM, Szabó Zoltán János: The technicians are do the anod 1 line. We are loading the powder on the anod 2line.
March 20, 2025 at 3:04 PM, Varga Tamás Powder: I would like to ask for help with powder anode 2. we cannot report the loaded powder ready
March 20, 2025 at 3:05 PM, 동진: Have you tried moving the hoist forward and backward?
March 20, 2025 at 3:06 PM, Varga Tamás Powder: it says Sealimg Not Up alarm as an error

Chunk 906:
March 20, 2025 at 6:11 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás

Chunk 907:
March 20, 2025 at 6:28 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.20 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 21, 2025 at 12:36 AM, Powder tréner: Sziasztok szeretnék kérni segítséget. Poron Katod oldalon air showerbe elakadt a 2 AGV.Az 1 AGV elakadt a 3 sornál.
March 21, 2025 at 4:47 AM, Powder tréner: Poron katod oldalon el elakadt az AGV. Szeretnék kérni segítséget.
March 21, 2025 at 4:50 AM, Mr.Miti (미티) FA: Oké

Chunk 908:
March 21, 2025 at 5:25 AM, Powder tréner: Poron 3 AGV nekiment 1nek.
March 21, 2025 at 5:29 AM, gutenkunstabelzoltan: Tudjuk megy a miti eppen
March 21, 2025 at 8:50 AM, Powder tréner: Sziasztoka a katod 2 vonalon a E1PLC0321_P02 port-ra nem lehet hívni a robotot majd meg nézitek
March 21, 2025 at 8:56 AM, Simon Attila F. A.: This message was deleted.
March 21, 2025 at 8:57 AM, Simon Attila F. A.: A 31_P02-n van anyag a gép szerint.

Chunk 909:
March 21, 2025 at 1:53 PM, Powder tréner: Hali az anod oldalon a termelésben az 1-es gépnél Az EOPGVA11-ST-MCP #1 hibát jelez! És nem tudok AVG hívni
March 21, 2025 at 1:54 PM, Farkas Tamàs: Hali, rendben megnézzük
March 21, 2025 at 1:58 PM, Viczai Tamás: Úgy látjuk hogy már megy,de még nézzük!

Chunk 910:
March 21, 2025 at 6:22 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:10/13+2 Overtime Overtime (1): Pálosi Róbert, Csanálosi Gábor Sick (0):- Holiday (2): Magyar Balázs, Oláh András Shift change(1): Novák Zoltán Elektróda:(3) Szabadi Miklós, Kiss Balázs, Pálosi Róbert Assembly(6): GF: Novák Zoltán, Béki Norbert, Csanálosi Gábor 1F: Zsurbej Zsolt, Nagy Zsolt, Kasztel Balázs Modul(2): Martina Dávid, Nagy Gábor

Chunk 911:
March 21, 2025 at 6:50 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 21, 2025 at 8:41 PM, VK (mcs): @FA Please check Cathode powder STK C12 Hoist driver error!
March 21, 2025 at 8:44 PM, Szabadi Miki: Checking
March 21, 2025 at 9:17 PM, Varga Zoltán: Helló please help we pushed LR button on E1PLA021_P01 port but blue light on not white. Material dont come

Chunk 912:
March 21, 2025 at 9:19 PM, Szabadi Miki: Mindjárt fent vagyok és megnézem azt is
March 21, 2025 at 10:41 PM, Varga Zoltán: Katód 3-nál AGV hiba ismét
March 21, 2025 at 10:41 PM, Dániel Hufnágel: Kis türelmet kérünk, létszám híján, minimum 20 perc mire oda érünk
March 21, 2025 at 10:41 PM, Dániel Hufnágel: Sajnáljuk
March 21, 2025 at 10:42 PM, Varga Zoltán: Rendben köszi
March 22, 2025 at 12:37 AM, Varga Zoltán: Katód 3-nál AGV hiba ismét
March 22, 2025 at 12:37 AM, Kiss Balázs F.A.: Okés

Chunk 913:
March 22, 2025 at 12:37 AM, Kiss Balázs F.A.: 10perc
March 22, 2025 at 12:38 AM, Varga Zoltán: Nem sűrgős, köszönöm
March 22, 2025 at 12:39 AM, Kiss Balázs F.A.: Minimum
March 22, 2025 at 9:30 AM, Powder tréner: Hali a katod oldalon az egyik AVG kiált hibára meg nézitek
March 22, 2025 at 9:31 AM, Marsi Gábor: Megyek
March 22, 2025 at 9:34 AM, Powder tréner: Meg a por katod raktárban is elakadt a egyik AVG
March 22, 2025 at 9:35 AM, Farkas Tamàs: Már megyünk

Chunk 914:
March 22, 2025 at 9:53 AM, Marsi Gábor: Kész
March 22, 2025 at 9:53 AM, Marsi Gábor: Kész
March 22, 2025 at 1:54 PM, Molnár Ferenc: Sziasztok! Modul automata raktárból szeretnénk ki venni egy raklap hulladékot. M0CNV022 _BP02 nél hiba kód van
March 22, 2025 at 1:56 PM, Molnár Ferenc: STOP DETECT Error
March 22, 2025 at 1:57 PM, Farkas Tamàs: Szia Jelezem az illetékeseknek
March 22, 2025 at 1:57 PM, Molnár Ferenc: Köszönöm

Chunk 915:
March 22, 2025 at 2:01 PM, Farkas Tamàs: Szívesen! Hamarosan mennek, kis türelem mert egy másik hibán vannak jelenleg. Köszönöm!
March 22, 2025 at 2:02 PM, Molnár Ferenc: Rendben várunk türelemmel.

Chunk 916:
March 22, 2025 at 6:08 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Hufnágel Dániel Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs

Chunk 917:
March 22, 2025 at 6:34 PM, Varga Zoltán: Sziasztok poron katód oldalon kértem alapanyagot de a raktárból nem jön ki. Tudnátok segíteni? Köszönöm szépen
March 22, 2025 at 6:36 PM, Szabadi Miki: Uton vagyunk a raktár áll azért nem megy az anyag
March 22, 2025 at 7:10 PM, Varga Zoltán: Anódon AGV rosszul rakta le az anyagot hiba
March 22, 2025 at 7:12 PM, Szabadi Miki: Megyünk már öltözünk mert katodon is megállt
March 22, 2025 at 7:15 PM, Varga Zoltán: Anódra gyertek elöször légyszi

Chunk 918:
March 22, 2025 at 10:35 PM, Varga Zoltán: Por anód raktárból nem veszi ki az AGV az anyagot. Gyertek légyszi
March 22, 2025 at 10:36 PM, Szabadi Miki: Rendben majd érkezünk
March 23, 2025 at 12:56 AM, Varga Zoltán: Por anód raktárból nem veszi ki az AGV az anyagot. Gyertek légyszi
March 23, 2025 at 12:57 AM, Szabadi Miki: Rendben nemsoká ott leszünk
March 23, 2025 at 3:18 AM, Varga Zoltán: Anódon AGV rosszul rakta le az anyagot nem tud kiállni , gyertek légyszi, köszönöm

Chunk 919:
March 23, 2025 at 3:19 AM, Szabadi Miki: Rendben nemsoká ott leszünl
March 23, 2025 at 1:58 PM, Powder tréner: Sziasztok a por anodon a 2 es AVG folyton elakad az egyik alsó szenzora folyamatosan vilog
March 23, 2025 at 1:59 PM, Marsi Gábor: OK mindjárt megyek
March 23, 2025 at 4:31 PM, Powder tréner: Hali Por katodon az 1 es AVG lerobant bent a területen meg nézitek
March 23, 2025 at 4:34 PM, Viczai Tamás: Megyünk
March 23, 2025 at 4:35 PM, Powder tréner: Meg anodon is léci

Chunk 920:
March 23, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (1):Csanálosi Gábor Sick (0):- Holiday (2):Kiss Balázs , Zsurbej Zsolt Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Hufnágel Dániel Assembly(6): GF: Novák Zoltán, Csanálosi Gábor, Béki Norbert 1F: Kasztel Balázs, Novák Károly, Nagy Zsolt Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs

Chunk 921:
March 23, 2025 at 6:41 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 24, 2025 at 3:01 AM, Varga Zoltán: Sziasztok poron katód air showerben megállt az AGV segítsetek légyszi
March 24, 2025 at 3:02 AM, Oláh András: Mindjárt jövünk

Chunk 922:
March 24, 2025 at 6:10 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.24 Time:06:00-18:00 1. Jung woojun 2. Baek hojong Köszönöm szépen

Chunk 923:
March 24, 2025 at 6:40 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 924:
March 24, 2025 at 6:51 AM, Powder tréner: Sziasztok,segitséget szeretnék kérni.Katód 2 poron megállt 2es AGV.
March 24, 2025 at 2:48 PM, 최대운: @최종건 @이철훈_CIM_SKCC @조범석 분체 1라인 LR 요청했는데, 창고에서 자재가 안나오고 있습니다. 확인 바랍니다.
March 24, 2025 at 2:49 PM, Sazzad Bhai SKon: Checking
March 24, 2025 at 2:51 PM, 최대운: @김민수 @문진영 @이석규 매니저 1F 분체 출고 되어야 하는데, 창고가 안움직입니다. 다른 작업 하고 계시는가요?
March 24, 2025 at 2:51 PM, 김민수: SCS로 체크해 보겠습니다. 몇호기인지 알려주시겠습니까?
March 24, 2025 at 2:52 PM, Baek Hojong(백호종)FA: 1,2,3호기 인액티브인데 이유가 있나요?

Chunk 925:
March 24, 2025 at 2:52 PM, 문진영: 양극쪽 제가 테스트하고 정지 걸었었는데 지금 풀었습니다.
March 24, 2025 at 2:52 PM, 문진영: 죄송합니다.
March 24, 2025 at 2:52 PM, Mohammad Amir: For Cathode transfer has initiated ✅ Thank you very much!
March 24, 2025 at 2:56 PM, Sazzad Bhai SKon: Reason for delay: E0STKC11_P04 out put port was oos from 14:15 to 14:46

Chunk 926:
March 24, 2025 at 3:07 PM, Mohammad Amir: Transfer for destination E1PLC021_P02 has stopped cause E0CNVC12_P07 is currently OOS because of data loss Error. I already informed responsible FA member. Monitoring the transfer. Thank you very much!
March 24, 2025 at 3:15 PM, Mohammad Amir: Transferred has resumed AGV#4 on the way. Thank you!
March 24, 2025 at 3:38 PM, 윤경환: @Fa anode Automatic warehouse stopped. Pallet Abnormal Position. CV12-010 Please check it.

Chunk 927:
March 24, 2025 at 3:45 PM, Baek Hojong(백호종)FA: @장영환(Younghwan Chang) @주범진 피엠님! 1F 분체 양극 에어샤워 지나고 나면 오른쪽 포대자루 때문에 화물이 계속 감지되고 있습니다. 포대자루 이동 요청드립니다. 야간에는 작업자 없을경우 오랜시간 감지로 에러 발생 우려가 있습니다. 작업자 및 SL에게 전달 부탁드립니다
March 24, 2025 at 3:48 PM, Baek Hojong(백호종)FA: 요청했습니다 쪼매만 기둘려요 조장님
March 24, 2025 at 3:55 PM, 윤경환: 감사 합니다!

Chunk 928:
March 24, 2025 at 4:01 PM, 주범진: 안녕하세요 피엠님, 포대자루 감지되지 않도록 정리 요청 하겠습니다 @Powder tréner @Varga Tamás Powder Hello Can you please organize the ton bag that in front of cathode airshower? We need to check continuously

Chunk 929:
March 24, 2025 at 6:22 PM, Szücs Géza FT-B: Jó estét! Good morning! "B" műszak, 8+3/11(+1) Tech, 1Sl Overtime(3): Novák Zoltán, Novák Károly, Béki Norbert Holiday(3+1): Czeilinger Krisztián, Gerbovits Kevin, Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Novák Zoltán, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Pintye Miklós László, Béki Norbert --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János ----

Chunk 930:
March 24, 2025 at 8:50 PM, Szücs Géza FT-B: AGV AN#2 szenzor takarítva, AGV AN#1 pozíció igazítva, AGV AN#3 töltés elindítva STK C11 SMC-re vár
March 24, 2025 at 8:56 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check powder stocker C11 “Hoist Driver Error”. Thanks
March 24, 2025 at 8:58 PM, Szücs Géza FT-B: vendor
March 24, 2025 at 9:06 PM, 김민수: its ok now
March 25, 2025 at 2:31 AM, Varga Tamás Powder: Sziasztok. Poron anód 2-es sornál lerakta az AGV az anyagot és elakadt. Megtudnátok nézni? Köszönöm

Chunk 931:
March 25, 2025 at 2:35 AM, Szücs Géza FT-B: Szia, meg fogom nézni, de kell egy 30-40 perc, hogy odaérjek.
March 25, 2025 at 3:10 AM, Szücs Géza FT-B: kész

Chunk 932:
March 25, 2025 at 6:08 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 933:
March 25, 2025 at 6:40 AM, Powder tréner: Sziasztok,szeretnék kérni segítséget,powder Katód air showerben megállt az AGV.

Chunk 934:
March 25, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 6+5/11(+1) Tech, 1Sl Overtime(5): Novák Zoltán, Novák Károly, Kasztel Balázs, Zsurbej Zsolt, Nagy Zsolt Holiday(5+1): Czeilinger Krisztián, Gerbovits Kevin, Kovács Ágnes, Pálosi Róbert,Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Kasztel Balázs --------------- Assy GF (3): Novák Zoltán, Novák Károly, Pintye Miklós --------------- Assy 1F (3): Böröczki Balázs, Zsurbej Zsolt, Nagy Zsolt --------------- Form

Chunk 935:
March 25, 2025 at 9:00 PM, Szabó Zoltán János: Sziasztok, Katod 1 porbetoltesnel megallt az agv. Ra neztek, legyszives? Koszonom.
March 25, 2025 at 9:00 PM, Szücs Géza FT-B: megyek

Chunk 936:
March 25, 2025 at 9:29 PM, Szücs Géza FT-B: Poron a telepítő cég CA oldalon AGV CA#1-et állította. miután végeztek, nem szedték ki az ACS-ből, valamint a töltőt, ahova tették, nem tiltották. (ogen, az oda vezető út tiltva lett, de akkor is hibát okozott az AGV benthagyása és a töltő nem letiltott álapota.) Erre figyelhetnébek jobban. AGV CA#1 térszenzor takarítva
March 25, 2025 at 9:29 PM, Varga Tamás Powder: Sziasztok. Poron az AGV megállt az 1-es soron. Megtudjátok nézni? Köszönöm.

Chunk 937:
March 25, 2025 at 9:30 PM, Varga Tamás Powder: Katód
March 25, 2025 at 9:32 PM, Szücs Géza FT-B: öltözöm vissza
March 25, 2025 at 9:50 PM, Szücs Géza FT-B: @Szabó Zoltán János mennyi idő CA oldalon, amíg elfogy 1 raklap?
March 25, 2025 at 9:54 PM, Varga Tamás Powder: 1 paletta kb 5-10 perc
March 25, 2025 at 9:55 PM, Szücs Géza FT-B: túl gyorsan dolgoztok
March 25, 2025 at 9:55 PM, Szücs Géza FT-B: 🤣
March 25, 2025 at 9:56 PM, Szabó Zoltán János: 😀 hajtanak minket

Chunk 938:
March 25, 2025 at 9:57 PM, Varga Tamás Powder: 😁😁😁
March 25, 2025 at 9:57 PM, Szücs Géza FT-B: ne hajtogassanak, mondd nekik, hogy nem vagy "origami"
March 25, 2025 at 10:51 PM, Varga Tamás Powder: Sziasztok, segitséget szeretnék kérni a poron. A katod oldalt a raktárban megállt az AGV. a másik pedig az 1-es és a 2-es sor között várakozó állásban van. Megtudnátok nézni? Köszönöm.
March 25, 2025 at 10:53 PM, Szabó Zoltán János: Gepen a raktaron azt mutatja, hogy mukodik csak nem megy semerre.

Chunk 939:
March 25, 2025 at 11:01 PM, Varga Tamás Powder: Anód oldalt is ugyan ez a helyzet!!
March 25, 2025 at 11:02 PM, Szücs Géza FT-B: pillanat
March 25, 2025 at 11:03 PM, Szabó Zoltán János: 🙏
March 25, 2025 at 11:03 PM, Szücs Géza FT-B: a gyár másik felén vagyok
March 26, 2025 at 1:20 AM, Szabó Zoltán János: Por,Katodon 2.sor mellett ismet megallt. (Szerintem jobb ha valaki itt marad keszenletben.)

Chunk 940:
March 26, 2025 at 4:03 AM, Varga Tamás Powder: Por, anód 2.sornál megállt az AGV. Még az anyagot se tette le. Megtudná valaki nézni? Köszönöm
March 26, 2025 at 4:04 AM, Szabó Zoltán János: Mindjart jon vissza a kollega aki fent volt eddig. Csak lejott szunetre.
March 26, 2025 at 6:18 AM, Powder tréner: Sziasztok Por katod oldara szeretnék segítséget a robotok hoz folyton megálnak
March 26, 2025 at 6:24 AM, Marsi Gábor: Megyek

Chunk 941:
March 26, 2025 at 1:00 PM, Powder tréner: Szászok a katodon jelenleg 2 AVG megált a katod oldalon megnézitek
March 26, 2025 at 1:01 PM, Farkas Tamàs: Igen
March 26, 2025 at 6:12 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs

Chunk 942:
March 26, 2025 at 6:44 PM, Dániel Hufnágel: @VK (mcs) Good evening! Can you check me please powder chatode line 2 E1PLC041_P01 status? In the MCS i see an installed carrier but the ACS is empty
March 26, 2025 at 6:49 PM, VK (mcs): Yes it’s correct in MCS PS111-2402230018 is located there. Is it empty in actual case?
March 26, 2025 at 6:53 PM, Dániel Hufnágel: Guys are move up and check it, give them 5-10 min please

Chunk 943:
March 26, 2025 at 6:54 PM, VK (mcs): As I checked last request for that carrier was 2nd Feb
March 26, 2025 at 7:07 PM, Oláh András: There is nothing in the port
March 26, 2025 at 7:16 PM, VK (mcs): Would you want me to modify MCS?
March 26, 2025 at 7:16 PM, Dániel Hufnágel: Yes please
March 27, 2025 at 2:21 AM, Varga Zoltán: Sziasztok poron katód oldalon megállt 2 AGV nézzétek meg légyszi. Köszönöm
March 27, 2025 at 2:21 AM, Szabadi Miki: Kint vagy bent ?

Chunk 944:
March 27, 2025 at 2:22 AM, Varga Zoltán: Bent az Air shower előtt
March 27, 2025 at 2:22 AM, Oláh András: Megyünk
March 27, 2025 at 7:26 AM, Rózsavölgyi Attila: Hali por Anodon bent megált a robot meg nézitek
March 27, 2025 at 7:27 AM, Marsi Gábor: Megyünk
March 27, 2025 at 7:28 AM, Rózsavölgyi Attila: Okés
March 27, 2025 at 7:31 AM, Bilgee/빌지 /A조/AGV left this chatroom.

Chunk 945:
March 27, 2025 at 7:55 AM, Molnár Ferenc: Sziasztok! Katód oldalon a foldszint raktárban szeretnénk ki szedni 20 plt Ecopro t. De még állt az automata. Run time ower alarm
March 27, 2025 at 7:55 AM, Farkas Tamàs: Szia Nézem
March 27, 2025 at 7:57 AM, Farkas Tamàs: Megyünk
March 27, 2025 at 7:59 AM, Molnár Ferenc: Köszönöm
March 27, 2025 at 9:21 AM, 윤경환: @FA 안녕하세요. 양극분체 배출 중인데 RTV가 화물 싣지 못하고 왔다갔다만 하고 있습니다. 금일 양극재 4차분 입고 예정 입니다. 빠른 조치 부탁 드립니다. 헝가리 테크니션들이 다녀갔으나 조치 안됩니다.

Chunk 946:
March 27, 2025 at 9:45 AM, 남현우: Rtv 정상작동 중입니다 스토퍼 딜레이 조정했습니다
March 27, 2025 at 9:46 AM, KIM SEYEON [김세연]_FA: @남현우 과장님 감사합니다. 혹시 어제나 그제 변경점이 있었나요? 왜 갑자기 이런현상이 발생한건가요?
March 27, 2025 at 9:47 AM, 남현우: 저번주에 스토파 사용 한다고 변경점 신청하고 진행했는데 시간이 좀 짧았습니다
March 27, 2025 at 9:47 AM, KIM SEYEON [김세연]_FA: 다른부분도 같이 확인하고 횡전개 해주실수 있을까요?
March 27, 2025 at 9:48 AM, KIM SEYEON [김세연]_FA: 분체 GF 양 음극 분체 1F 양 음극
March 27, 2025 at 9:49 AM, 남현우: 딜레이 확인해보겠습니다

Chunk 947:
March 27, 2025 at 11:06 AM, Yoon: 해당 내용 어떤 내용이신지 공유 해주시겠습니까? 사전에 전달 받은 내용이 없어서요
March 27, 2025 at 11:24 AM, 남현우: Photo
March 27, 2025 at 11:25 AM, 남현우: 스토퍼는 기존 음극은 사용 중이었고 양극만 사용모드 전환했습니다
March 27, 2025 at 12:42 PM, Molnár Ferenc: Sziasztok! Katód oldalon földszinten a raktárban Hoist time over error. Powder stocker #2
March 27, 2025 at 12:57 PM, Farkas Tamàs: Mennek
March 27, 2025 at 12:57 PM, Molnár Ferenc: Köszönöm
March 27, 2025 at 1:01 PM, Marsi Gábor: Kész

Chunk 948:
March 27, 2025 at 1:22 PM, Molnár Ferenc: Igen! Minden jó! Köszönöm
March 27, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs

Chunk 949:
March 27, 2025 at 7:45 PM, Varga Zoltán: Sziasztok poron anód 3-nál AGV nem rakja le az anyagot.nézzétek meg légyszi köszönöm
March 27, 2025 at 7:46 PM, Szabadi Miki: Rendben ahogy tudunk megyünk
March 27, 2025 at 8:15 PM, Varga Zoltán: Koreai kollégát találtam aki megcsinálja, köszi azért
March 27, 2025 at 8:16 PM, Szabadi Miki: Szuper el se engedjétek onnan reggelig 😀

Chunk 950:
March 28, 2025 at 6:42 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 13 Technician, 1 Sl, 4 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 951:
March 28, 2025 at 6:24 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 9+2/11(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(2+1): Pálosi Róbert, Kovács Ágnes, (+Radics András) Sick(0): --------------- Electrode3): Szabadi Miki, Kiss Balázs, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Denkó János --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztás

Chunk 952:
March 28, 2025 at 7:18 PM, Varga Tamás Powder: Dusty warehouse does not dispense the material, indicates that it is not in stock or is in short supply (M36H) Hyundai 112-00247A Can someone help?
March 28, 2025 at 7:18 PM, Varga Tamás Powder: Poros raktár nem adja ki az anyagot, azt jelzi hogy nincs a raktárban vagy kevés van (M36H) Hyundai 112-00247A
March 28, 2025 at 7:18 PM, Varga Tamás Powder: Tudna valaki segíteni?
March 28, 2025 at 7:19 PM, Varga Tamás Powder: Köszönöm

Chunk 953:
March 28, 2025 at 7:24 PM, Szücs Géza FT-B: @MCS
March 28, 2025 at 7:24 PM, Shahbaz 샤바즈 MCS/RTD: There is lot available in the next next lot search for Anode mixing M36H (112-00247A)
March 28, 2025 at 7:26 PM, Varga Tamás Powder: The light is flashing blue and it doesn't output.
March 28, 2025 at 7:28 PM, Shahbaz 샤바즈 MCS/RTD: Currently there is no such type of material in the stockers which you mentioned above.
March 28, 2025 at 7:31 PM, Varga Tamás Powder: Okay.

Chunk 954:
March 28, 2025 at 7:33 PM, Szücs Géza FT-B: AN oldal?
March 28, 2025 at 7:34 PM, Szabó Zoltán János: Igen
March 28, 2025 at 7:49 PM, Varga Tamás Powder: Sziasztok poron anod oldalt a 2es soron nem tudta a robot lerakni az anyagot. Meg tudnátok nézni? Köszönöm
March 28, 2025 at 7:54 PM, Szücs Géza FT-B: indulunk vissza
March 29, 2025 at 4:29 AM, Varga Tamás Powder: Sziasztok. A Poron anód oldalt 1es és a 2es sor között megállt az AGV. Megtudnátok nézni? Köszönöm

Chunk 955:
March 29, 2025 at 4:39 AM, Szabadi Miki: Megyünk
March 29, 2025 at 6:10 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl ———————————— Electrode (3): Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 956:
March 29, 2025 at 2:21 PM, 종일: Please do not store pallets on the 1-line AGV path.

Chunk 957:
March 29, 2025 at 6:20 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 10+1/11(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(1+1): Pálosi Róbert (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Szabadi Miki, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Denkó János --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztása változhat az elvégzendő

Chunk 958:
March 29, 2025 at 7:16 PM, Varga Tamás Powder: Sziasztok. Poron a katód 2es soron rosszúl teszi be a palettát az AGV. Megtudjátok nézni? Köszönöm
March 29, 2025 at 7:18 PM, Szücs Géza FT-B: szeva, 15-25 perc és ott vagyok
March 29, 2025 at 7:52 PM, Szücs Géza FT-B: mindig ugyan ott teszi le rosszul?
March 29, 2025 at 7:59 PM, Varga Tamás Powder: Igen
March 29, 2025 at 7:59 PM, Szücs Géza FT-B: esetleg megmutatod melyik az?

Chunk 959:
March 29, 2025 at 9:08 PM, Varga Tamás Powder: Ugyan olyan rosszul tesz le a 3as AGV a 2es portra a palettát
March 29, 2025 at 9:51 PM, Szabó Zoltán János: Ismet megallt az agv, katod poron. Meg nezitek legyszives? Helyette masik gepet ha be kapcsolnank?
March 29, 2025 at 9:51 PM, Szabó Zoltán János: Hatha annak jobb a programja
March 29, 2025 at 9:53 PM, Szücs Géza FT-B: optimista....🫢😄🤣
March 29, 2025 at 9:54 PM, Szabó Zoltán János: Csak egy otlet 😇😀

Chunk 960:
March 29, 2025 at 9:55 PM, Szücs Géza FT-B: @VK (mcs) Hi. Please change the carrier location, PS111-2412100066. Delete the data from E0CNVC12_P17 this carrier is on E0PGVC11_VC03 thank you
March 29, 2025 at 9:59 PM, VK (mcs): MCS modified
March 29, 2025 at 10:02 PM, Szücs Géza FT-B: @ccs
March 29, 2025 at 10:04 PM, VK (mcs): I have no permission to modify CCS.
March 29, 2025 at 10:30 PM, Szücs Géza FT-B: egyikünk sem akar több problémát szerintem 🫢😉

Chunk 961:
March 29, 2025 at 10:30 PM, Szücs Géza FT-B: kész mind a 2 hiba
March 29, 2025 at 10:33 PM, Varga Tamás Powder: Sziasztok. Anod 2es sornál megállt az AGV megtudnátok nézni? Köszönöm
March 29, 2025 at 10:34 PM, Szücs Géza FT-B: megyek, betöltés zajlik?
March 29, 2025 at 10:48 PM, Szücs Géza FT-B: kész
March 29, 2025 at 11:45 PM, Varga Tamás Powder: Sziasztok. Poron katod oldalt az Air showerben megállt az AGV. Megnéznétek? Köszönöm
March 30, 2025 at 12:36 AM, Szücs Géza FT-B: Szia, indulok

Chunk 962:
March 30, 2025 at 1:55 AM, Szücs Géza FT-B: poron itt maradunk 03:01-ig :)
March 30, 2025 at 1:56 AM, Rácz Dániel / FA: This message was deleted.
March 30, 2025 at 1:56 AM, Szabó Zoltán János: Szemfenyvesztes 😀 1 orat el csalsz 😀
March 30, 2025 at 1:59 AM, Szücs Géza FT-B: rágalom
March 30, 2025 at 5:18 AM, Szabó Zoltán János: Katod 1 poron raklap lerakas elott megallt a robot. Par raklap korulotte volt pakolva es letiltott.
March 30, 2025 at 5:19 AM, Csanálosi Gábor FA: Megyek

Chunk 963:
March 30, 2025 at 5:28 AM, Szabó Zoltán János: Koszonom
March 30, 2025 at 5:42 AM, Csanálosi Gábor FA: Nincs mit.

Chunk 964:
March 30, 2025 at 6:18 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 965:
March 30, 2025 at 6:17 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(5): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián, Gégény Dávid --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János ---------

Chunk 966:
March 30, 2025 at 6:30 PM, Szücs Géza FT-B: This message was deleted.

Chunk 967:
March 30, 2025 at 6:34 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 968:
March 30, 2025 at 6:57 PM, Szücs Géza FT-B: AGV CA#3 ismét üzemel
March 31, 2025 at 6:00 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:8/12 Overtime (0):- Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(2): Magyar Balázs, Nagy Gábor
March 31, 2025 at 3:48 PM, 윤경환: @FA 포일창고 스태커1번 정지 상태인데 뭔가 하고 계신걸까요??

Chunk 969:
March 31, 2025 at 3:49 PM, 윤경환: 스태커 1번 에러 코드 196번 MCP AP Error 확인 부탁 드립니다.
March 31, 2025 at 3:53 PM, Szabadi Miki: Solved
March 31, 2025 at 3:54 PM, 윤경환: Thank you.👍
March 31, 2025 at 3:54 PM, Szabadi Miki: Very welcome

Chunk 970:
March 31, 2025 at 7:18 PM, VK (mcs): @Manufacturing @FA There is a job from E1PLA041-P02 to CNV, but job canceled by OP action! Would you want to cancel the job? job still exists in MCS. April 1, 2025 at 6:25 AM April 1, 2025 at 6:25 AM, Varga Zoltán : Sziasztok AGV megállt katódon nézzétek meg légyszi April 1, 2025 at 6:28 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:8/12+1 overtime Overtime (1): Boromisza Zoltán Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Boromisza Zoltán April 1, 2025 at 6:29 AM, Dániel Hufnágel : Kis türelmet kérünk, alacsony létszám miatt biztosan nem érünk oda egyhamar April 1, 2025 at 6:31 AM, Varga Zoltán : Rendben April 1, 2025 at 8:44 AM, Varga Zoltán : 2 AGV megállt katódon poron. Nézzetek meg légyszi köszönöm April 1, 2025 at 2:20 PM, 윤경환 : @MCS 음극 분체 창고 PS112-2501100040 샘플링을 위해 WMS 출고 중인데 명령이 안되는것 같습니다. GF E0CNA11_M02로 배출 부탁 드립니다. April 1, 2025 at 2:20 PM, Mohammad Amir : Working on it! April 1, 2025 at 2:23 PM, Sazzad Bhai SKon : The job is not possible. The destination is cathode M02 but source is anode STK April 1, 2025 at 2:23 PM, Mohammad Amir : Should we cancel the current job and create new one with correct destination? April 1, 2025 at 2:25 PM, 윤경환 : Yes, that’s right. April 1, 2025 at 2:25 PM, Mohammad Amir : We have created the right command and send the material to M02 port. Please collect it. Thank you very much! April 1, 2025 at 2:25 PM, 윤경환 : Thank you.👍 April 1, 2025 at 2:26 PM, Mohammad Amir : You are welcome! April 1, 2025 at 2:50 PM, 김동완 : @mcs 지금 분체 양극 agv 2호기가 받은 명령 삭제 해주세요 스테이션에 자재가 있습니다 April 1, 2025 at 2:50 PM, duzzaman Md (MCS) : On it April 1, 2025 at 2:53 PM, duzzaman Md (MCS) : Job has been cancelled. ✔️ April 1, 2025 at 5:17 PM, duzzaman Md (MCS) : @FA Please check E0CNVA12_P01 Data Loss Error persists there. Thanks! April 1, 2025 at 7:27 PM, Rózsavölgyi Attila : Helló segítséget szeretnék a por Katod oldalon a termelésben megált az egyik AVG April 1, 2025 at 7:41 PM, Zagyva Tamás : Por területre kérünk valakit,mert az AVG nem veszi le a raklapot a raktárból,csak előtte áll keresztbe April 1, 2025 at 7:42 PM, Marsi Gábor : Megyek April 1, 2025 at 7:43 PM, Zagyva Tamás : Köszi April 1, 2025 at 8:26 PM, Baek Hojong(백호종)FA : @Shahbaz 샤바즈 MCS/RTD E0CNVA12 CARRIER ID R999014 Please put it in the warehouse. It's test material. April 1, 2025 at 8:28 PM, Shahbaz 샤바즈 MCS/RTD : Sorry, the port P08 is currently OOS. April 1, 2025 at 8:31 PM, Baek Hojong(백호종)FA : Don't do it for now April 1, 2025 at 8:31 PM, Shahbaz 샤바즈 MCS/RTD : Okay sir. April 1, 2025 at 11:14 PM, Zagyva Tamás : @Marsi Gábor Poron bent a területen ismét megállt az AGV.Meg tudnátok majd nézni? April 1, 2025 at 11:15 PM, Marsi Gábor : Már úton vagyok April 2, 2025 at 6:15 AM April 2, 2025 at 6:15 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 2, 2025 at 8:49 AM, Varga Zoltán : Sziasztok poron katód oldalon AGV nem veszi le az anyagot a raktárból. Segítséget szeretnék kérni April 2, 2025 at 9:06 AM, Varga Zoltán : Levette köszönöm April 2, 2025 at 9:44 AM, 김동완 : @mcs Powder 양극 명령이 나오지 않습니다 스테이션에서 LR을 눌렀는데 명령이 agv에 할당된게 없습니다 April 2, 2025 at 9:44 AM, Sazzad Bhai SKon : Checking April 2, 2025 at 9:45 AM, Mohammad Amir : Sir, Please tell me for which equipment you pressed LR. Are you talking about E1PLC011,021? Thank you very much! April 2, 2025 at 9:47 AM, 김동완 : E1PLC021_P01 E1PLC021_P02 E1PLC011_P01 April 2, 2025 at 9:47 AM, Mohammad Amir : Sir , Actually it is not moving for PLC011,021 because there is PS111-2412110087 has no job,it is located at E0CNVC12_P07,job was cancelled at 9:21. I am solving the issue. Thank you very much! April 2, 2025 at 9:53 AM, Mohammad Amir : Issue has been resolved Sir. ✅ Cathode Powder material transfer will be normalised. I am monitoring the process. Thank you very much! April 2, 2025 at 10:00 AM, Mohammad Amir : Sir, Soon you will start receiving the cathode powder material,issue has been fixed. Materials are currently waiting for the AGVs. Thank you very much! April 2, 2025 at 10:01 AM, Mohammad Amir : AGV#2 on the way with materials to PLC011. ✅ Thank you very much f! April 2, 2025 at 10:03 AM, 장영환(Younghwan Chang) : @KIM SEYEON [김세연]_FA 전극 4라인도 AGV 티칭 되어있나요? April 2, 2025 at 11:02 AM, KIM SEYEON [김세연]_FA : 네 티칭되어 있습니다. April 2, 2025 at 12:58 PM, Varga Zoltán : Sziasztok AGV megállt katód #1-nél fork bumper#1 üzenettel meg tudnátok nézni légyszi. Köszönöm April 2, 2025 at 1:00 PM, Varga Zoltán : Poron April 2, 2025 at 6:08 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 2, 2025 at 6:17 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.04.02 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen April 2, 2025 at 10:15 PM, Varga Tamás Powder : Sziasztok. A poron a katód oldalt a 2es soron 2es portra a 2es AGV úgy tette le a palettát hogy széttört. Megtudnátok nézni? Köszönöm April 2, 2025 at 10:32 PM, Rácz Dániel / FA : Jövünk April 2, 2025 at 11:11 PM, Varga Tamás Powder : Sziasztok. A poron katodon 2es soron a 2es portnál a szenzort eltörte az AGV. ezáltal nem tudunk anyagot hivni. Megtudnátok nézni? Köszönöm April 2, 2025 at 11:23 PM, Szücs Géza FT-B : alkatrész beszerzés alatt April 2, 2025 at 11:30 PM, Szabó Zoltán János : Katod por, raktarnal a 2. Szamu robot megallt a paletta levetelnel. Majd erre is ra neztek, legyszives? Koszonom. April 2, 2025 at 11:44 PM, Szücs Géza FT-B : megyek April 3, 2025 at 12:31 AM April 3, 2025 at 12:31 AM, Szücs Géza FT-B : kész April 3, 2025 at 12:46 AM, Szücs Géza FT-B : kész ez is April 3, 2025 at 1:50 AM, Szabó Zoltán János : Por, katod raktar elott 2 robot megallt. (Majdnem dodgemeztek.) Helyreallitast szeretnek kerni. Koszonom. April 3, 2025 at 1:55 AM, Szücs Géza FT-B : megyek April 3, 2025 at 2:43 AM, Szücs Géza FT-B : kész, vagy fogjuk rá April 3, 2025 at 3:23 AM, Szabó Zoltán János : Katod, por Megallt a gep a sor mellett, meg nezitek legyszives? Koszonom April 3, 2025 at 3:25 AM, Varga Tamás Powder : 1es sor mellett April 3, 2025 at 3:38 AM, Szücs Géza FT-B : pillanat, jelenleg nincs elérhető technikus és SL April 3, 2025 at 4:23 AM, Szücs Géza FT-B : kész April 3, 2025 at 4:23 AM, Szücs Géza FT-B : a sarokban a zsák kilóg az útba, ez a baj April 3, 2025 at 6:56 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4: Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 3, 2025 at 8:36 AM, Varga Zoltán : Sziasztok poron katód air showerben megállt az AGV nézzétek meg légyszi köszönöm April 3, 2025 at 8:42 AM, gutenkunstabelzoltan : Mindjart megyunk April 3, 2025 at 2:22 PM, 윤경환 : @FA 음극분체 창고 STK 2호기 Error code 145. Load size information Error 확인 부탁 드립니다. April 3, 2025 at 2:34 PM, 강기훈 : @주범진 @장영환(Younghwan Chang) @정재훈 @송광진PM FA장비unit @유병일 @KIM SEYEON [김세연]_FA @최종건 @이승천 @상진 @윤경환 분체 양극 생산 중 참고사항 공유 드립니다 PS111-2412110143 PO NO : 4200123048-10 ITEM CODE : 111-00150A 상기 정보가진 에코프로비엠 실자재 작업 중 오퍼레이터 UR로 잘못 인지하여 AGV가 1라인 E1PLC011_P01에서 실자재를 창고로 회수하려 하여 캔슬 후 2라인 E1PLC041_P02에 다시 내려 놓았습니다 참고하시어 재사용 하면 될 것 같습니다 April 3, 2025 at 3:30 PM, Varga Zoltán : Helló we have a problem. E1PLC011-P02 port doesnt work. Only blue light blinking and green and white button blinking. Can you help me please? April 3, 2025 at 5:30 PM, 윤경환 : @FA 음극분체 창고 STK2호기 Error code : 236. Light curtain detected error (scs) 조치 부탁 드립니다. April 3, 2025 at 6:21 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 3, 2025 at 8:32 PM, VK (mcs) : @FA Please check Anode powder STK A12-Port 2(1006) Light curtain detected error. April 3, 2025 at 8:34 PM, Rácz Dániel / FA : 15 minute and I go checking April 3, 2025 at 8:35 PM, Rácz Dániel / FA : Thank you for the information 🙏 April 3, 2025 at 9:03 PM, Varga Tamás Powder : Sziasztok. A poron katód oldalt a 2es AGV a 2es soron a 2es porton rosszúl tette le az anyagot. Ugyan az a probléma mint tegnap. Elöbb utobb megint letöri a prizmát. Megnéznétek légyszives? Köszönöm April 3, 2025 at 9:05 PM, Szücs Géza FT-B : úton, van betöltés? April 3, 2025 at 9:05 PM, Varga Tamás Powder : Igen van April 3, 2025 at 9:08 PM, Szücs Géza FT-B : Working April 3, 2025 at 9:52 PM, Varga Tamás Powder : The dusty warehouse does not issue the material, it indicates in line 1 at port 2 that it is out of stock or out of stock (4BW) Ford 111-00150A Can someone help? April 3, 2025 at 9:52 PM, Varga Tamás Powder : A poros raktár nem adja ki az anyagot, a 2-es porton az 1-es sorban jelzi, hogy nincs raktáron vagy elfogyott (4BW) Ford 111-00150A Tud valaki segíteni? April 3, 2025 at 9:53 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please check material April 3, 2025 at 9:56 PM, VK (mcs) : Is it E1PLC011_P02? April 3, 2025 at 9:59 PM, Szücs Géza FT-B : @Varga Tamás Powder AGV az airshower előtt, megint a zsák kilógása miatt állt ki hibára. Valaki elkapcsolta? April 3, 2025 at 9:59 PM, Varga Tamás Powder : Pillanat nézem April 3, 2025 at 9:59 PM, Varga Tamás Powder : Yes April 3, 2025 at 10:00 PM, Varga Tamás Powder : Nem lóg ki a zsák. April 3, 2025 at 10:00 PM, VK (mcs) : There is no LR, please request load aging. Last LR was at 13:59:42 April 3, 2025 at 10:00 PM, Szücs Géza FT-B : itt nyomjatok gombot, rendszer nem mutatja, hogy lenne LD (LD=Load request, azaz anyag kérelem) April 3, 2025 at 10:01 PM, Varga Tamás Powder : Én reseteltem most. Meg tudnátok nézni mert nem tudom elindítani. April 3, 2025 at 10:02 PM, Szücs Géza FT-B : oksi, azé jelezd a csopiba plíz, lassan indulok April 3, 2025 at 10:02 PM, Varga Tamás Powder : Oké köszi April 3, 2025 at 10:04 PM, Varga Tamás Powder : The light is flashing blue. I press it in vain. April 3, 2025 at 10:04 PM, Varga Tamás Powder : A lámpa kéken villog. hiába nyomom. April 3, 2025 at 10:06 PM, Szücs Géza FT-B : oks pillanat és indulok April 3, 2025 at 10:17 PM, Varga Tamás Powder : Anód oldalt is megtudod majd nézni a raktárban? A palettát nem veszi le🤣 April 3, 2025 at 10:38 PM, Szücs Géza FT-B : kész April 3, 2025 at 10:49 PM, Szücs Géza FT-B : kész April 3, 2025 at 11:32 PM, Varga Tamás Powder : Sziasztok. Segitséget szeretnék kérni por katód oldal 2es sor 2es portra rosszúl tette be az AGV A PALETTÁT. kiált hibára most. Meg tudjátok nézni? Köszönöm April 3, 2025 at 11:45 PM, Szücs Géza FT-B : úton a segítség April 3, 2025 at 11:46 PM, Rácz Dániel / FA : Megvárom a porbetöltést utána megyek csak be. Köszi. April 3, 2025 at 11:48 PM, Rácz Dániel / FA : Írj majd légyszíves lemegyek dohányozni. April 3, 2025 at 11:49 PM, Varga Tamás Powder : Rendben 🙂 April 4, 2025 at 12:40 AM April 4, 2025 at 12:40 AM, Rácz Dániel / FA : Kész. @böröcz tamás segített. 😃 April 4, 2025 at 1:50 AM, Szücs Géza FT-B : @VK (mcs) please reset the alarm: E0PGVC11 we not have error Thank You! April 4, 2025 at 1:52 AM, VK (mcs) : There is an error from AGV 4 M6060 auto select abnormal April 4, 2025 at 1:55 AM, VK (mcs) : Alarm set received at 17:29:58 But MCS didn’t receive alarm cleared for that one. April 4, 2025 at 1:58 AM, Szücs Géza FT-B : AGV4 not working on this night April 4, 2025 at 2:01 AM, VK (mcs) : Alarm cleared should be receive from ACS side. then it will fix, I cannot clear alarm from MCS. April 4, 2025 at 2:04 AM, Szücs Géza FT-B : thx. i cant clear 🤣😢 April 4, 2025 at 6:08 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 4, 2025 at 7:07 AM, Varga Zoltán : Jó reggelt agv megállt air showernél anódon Air shower nyitva de nem jön ki a területről hibaüzenet nincs April 4, 2025 at 7:07 AM, Szabadi Miki : Rendben nemsoká megyünk April 4, 2025 at 7:55 AM, Varga Zoltán : Most a raktár előtt állt meg... Majd gyertek légyszi April 4, 2025 at 7:58 AM, Mr.Miti (미티) FA : 3-as viszi az anyagot. Srácok meg reggeliznek és érkeznek 😇 April 4, 2025 at 9:16 AM, Varga Zoltán : AGV anód #3 megállt. Meg tudnátok nézni légyszi April 4, 2025 at 9:16 AM, Szabadi Miki : Igen nemsoká megyünk April 4, 2025 at 9:26 AM, 윤경환 : 안녕하세요. 금일 음극자재 출고 하는데 출고 장소에 테스트용 팔렛 있네요. 최대한 AGV동선 피해서 올릴건데 이것들 언제까지 이곳에 보관 하셔야 하나요? April 4, 2025 at 9:34 AM, 송광진PM FA장비unit : 양음극 물동량 테스트 시 이동하려고 보관중인데 혹시 팔레트 안쪽으로 더 밀착시켜서 보관 더 해도 될까요? 현재 생산계획상 차주부터는 믹싱 생산이 많아 4월25-28일간 추가 테스트 진행하고자해서 그때까지 일부 수량은 보관하려고합니다. April 4, 2025 at 9:36 AM, 윤경환 : 보관 하시는건 문제가 안되겠지만 출고 물량이 많아 지면 AGV 동선에 올릴수 밖에 없는 상황이라서요. 양극재 자재도 양이 많으면 그쪽에 올려 놓고 있는 상황 입니다. April 4, 2025 at 9:52 AM, 송광진PM FA장비unit : 넵 양극쪽창고로 이동하는 일정 확인 후 공유드릴게요 April 4, 2025 at 10:03 AM, 윤경환 : 감사 합니다. April 4, 2025 at 2:56 PM, Varga Zoltán : Helló agv megállt katód 3-nál.légyszi nézzétek meg köszi April 4, 2025 at 2:58 PM, Szabadi Miki : Rendben megyünk April 4, 2025 at 9:17 PM, Powder tréner : Hello! I would like to ask for these materials: 2 pallets 112-002349A (Anode Materials) Thank you! April 4, 2025 at 9:18 PM, Zagyva Tamás : Silikon April 4, 2025 at 9:18 PM, Marsi Gábor : Megyünk leszedjük April 4, 2025 at 9:20 PM, VK (mcs) : Do you mean 112-00239A ? April 4, 2025 at 9:21 PM, Powder tréner : Yes April 4, 2025 at 9:24 PM, Zagyva Tamás : 112-00249A April 4, 2025 at 9:24 PM, Zagyva Tamás : Sorry April 4, 2025 at 9:24 PM, Powder tréner : I am sorry that I accidentally wrote April 4, 2025 at 9:25 PM, VK (mcs) : No problem, material has been released April 4, 2025 at 9:28 PM, VK (mcs) : 2 pallets silicon Daejoo 112-00249A released. April 4, 2025 at 9:34 PM, 윤경환 : This message was deleted. April 4, 2025 at 9:35 PM, 윤경환 : Thank you for your talking. Deajoo is always in the warehous.😃 April 5, 2025 at 12:13 AM April 5, 2025 at 12:13 AM, Powder tréner : Hali a poron az Anod oldalon 2 AVG megált meg nézitek April 5, 2025 at 12:18 AM, Zagyva Tamás : ? April 5, 2025 at 12:18 AM, Marsi Gábor : Nemsokára érkezünk April 5, 2025 at 12:19 AM, Zagyva Tamás : Oké.Köszi April 5, 2025 at 1:52 AM, Zagyva Tamás : Poron hiába kérjük az anyagokat,nem jön ki semmi a raktárból. April 5, 2025 at 1:53 AM, Simon Attila F. A. : Melyik oldal? April 5, 2025 at 1:55 AM, Marsi Gábor : Megnézitek hogy van elérhető anyag April 5, 2025 at 1:55 AM, Marsi Gábor : ? April 5, 2025 at 1:56 AM, VK (mcs) : Do you request anode material? April 5, 2025 at 1:57 AM, Zagyva Tamás : Anod April 5, 2025 at 1:57 AM, VK (mcs) : @FA Please check Anode powder STK A11,12,13 all are out of service. April 5, 2025 at 1:57 AM, Simon Attila F. A. : On the way... April 5, 2025 at 2:07 AM, Zagyva Tamás : A13 works April 5, 2025 at 2:10 AM, VK (mcs) : Material now on the way. April 5, 2025 at 2:11 AM, Zagyva Tamás : Thank you April 5, 2025 at 2:12 AM, Marsi Gábor : Done April 5, 2025 at 3:04 AM, Powder tréner : Sziasztok a por Anod oldalon megált 2 AVG meg nézitek April 5, 2025 at 3:04 AM, Marsi Gábor : Mrgyünk April 5, 2025 at 4:34 AM, KIM SEYEON [김세연]_FA has been reassigned as a host. April 5, 2025 at 6:42 AM, Varga Zoltán : Jó reggelt agv nem indul el levenni az anyagot a raktárból. Nézzetek meg légyszi köszönöm April 5, 2025 at 6:43 AM, Mr.Miti (미티) FA : Rendben April 5, 2025 at 6:45 AM, Varga Zoltán : Elindult köszönöm April 5, 2025 at 6:46 AM, Mr.Miti (미티) FA : Szívesen April 5, 2025 at 6:52 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Nagy Zsolt Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 5, 2025 at 7:26 AM, 김상훈 left this chatroom. April 5, 2025 at 8:14 PM, 김진호B_PM_시너스텍 left this chatroom. April 5, 2025 at 10:38 PM, Rózsavölgyi Attila : Hali a por Anod oldalon az egyik AVG megált meg tudnátok nézni April 5, 2025 at 10:39 PM, Marsi Gábor : Igen megyek April 5, 2025 at 10:56 PM, Marsi Gábor : Kész April 5, 2025 at 10:58 PM, Rózsavölgyi Attila : Köszi April 5, 2025 at 10:58 PM, Zagyva Tamás : Ok April 6, 2025 at 6:02 AM April 6, 2025 at 6:02 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Szabadi Miklós Kiss Balázs Oláh Andris ———————————— Assembly(5): Nagy Zsolt Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor April 6, 2025 at 7:07 AM, Baek Hojong(백호종)FA : @Szabadi Miki @Kiss Balázs F.A. @Oláh András CA Power AGV Error check plz April 6, 2025 at 7:08 AM, Szabadi Miki : Okay checking April 6, 2025 at 9:54 AM, 백한용 left this chatroom. April 6, 2025 at 10:41 AM, Varga Zoltán : Helló I would like to request 5 pallett ecopro 111-00150A Thank you April 6, 2025 at 10:42 AM, Varga Zoltán : A levételéhez kérek segítséget köszi April 6, 2025 at 10:42 AM, duzzaman Md (MCS) : Please confirm, it'd be An or CA ? April 6, 2025 at 10:42 AM, Varga Zoltán : CA April 6, 2025 at 10:43 AM, Oláh András : Nemsokára megyünk April 6, 2025 at 10:43 AM, Mr.Miti (미티) FA : Vannak agvk üzemben. Kérnem elsősorban azokat használni April 6, 2025 at 10:44 AM, Varga Zoltán : Hívtam a #6 és #2 sorra is alapanyagot LR gombbal de nem történt semmi azért kértem így April 6, 2025 at 10:45 AM, Mr.Miti (미티) FA : Nézzük hogy miért nem történt meg az LR. April 6, 2025 at 10:45 AM, Varga Zoltán : Igen April 6, 2025 at 10:46 AM, duzzaman Md (MCS) : @FA Please check the RTV It's OOs April 6, 2025 at 10:46 AM, duzzaman Md (MCS) : E0CNVC12_RTV01 April 6, 2025 at 10:55 AM, duzzaman Md (MCS) : @Mr.Miti (미티) FA , for your information, job creation is currently pending due to the RTV being out of service. Please let us know, once it's taken care of. Upon restoration of RTV service, the pallets will be dispatched to the P07 port. Thank you. April 6, 2025 at 10:57 AM, Mr.Miti (미티) FA : Technicians are on their way. When the RTV is ready, the AGV will automatically carry the pallet. Therefore, I would like to request that the manual command be deleted. April 6, 2025 at 10:58 AM, duzzaman Md (MCS) : Excellent. Thank you for providing this information. April 6, 2025 at 11:00 AM, Varga Zoltán : Köszi szépen April 6, 2025 at 11:00 AM, Mr.Miti (미티) FA : You’re welcome! April 6, 2025 at 11:00 AM, Mr.Miti (미티) FA : Szívesen! April 6, 2025 at 11:12 AM, Oláh András : RTV is ready and material is on the way 👍 April 6, 2025 at 12:22 PM, Janos R. MX SL : A por teeületen az AGV lezuzta a szendvics panelt April 6, 2025 at 12:22 PM, Varga Zoltán : Sziasztok AGV por katódon nekiment a falnak gyertek légyszi April 6, 2025 at 12:22 PM, Mr.Miti (미티) FA : Már úton vannak April 6, 2025 at 12:22 PM, Oláh András : Itt vagyunk 1 perc April 6, 2025 at 1:45 PM, Varga Zoltán : Helló szeretnék kérni 1 palletta silicon Daejoo 112-00249A Anode material Köszönöm April 6, 2025 at 1:49 PM, Mr.Miti (미티) FA : @duzzaman Md (MCS) please send the mentioned material to E0CNVA12_P07. Thank you very much! April 6, 2025 at 1:53 PM, duzzaman Md (MCS) : Job has been created. Thank you April 7, 2025 at 4:12 AM April 7, 2025 at 4:12 AM, Rózsavölgyi Attila : Hali az Anodon a termelésben meg ált az egyik AVG meg nézitek April 7, 2025 at 4:13 AM, Marsi Gábor : Megyek April 7, 2025 at 4:17 AM, Marsi Gábor : Kész April 7, 2025 at 4:31 AM, Marsi Gábor : This message was deleted. April 7, 2025 at 6:10 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10+2/12(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin, Rácz Dániel --------------- Electrode(4): Kiss Balázs, Szabadi Miklós, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A techn April 7, 2025 at 7:42 AM, Varga Tamás Powder : Sziasztok. A poron anod oldalt az air showerben megállt az AGV megtudjátok nézni? Köszönöm April 7, 2025 at 8:34 AM, Varga Tamás Powder : Sziasztok . Segitséget szeretnék kérni a catode 2es sorhoz. Az AGV befarolt a pályán😅 majdnem a lépcsönek ment😁 April 7, 2025 at 8:36 AM, Szabadi Miki : Megyek April 7, 2025 at 10:59 AM, 윤경환 : @FA / 전극생산 @송광진PM FA장비unit @주범진 금일 에코프로 샘플링 29 plt 1F로 이동 해야 하는데 공간이 없습니다. 공간좀 만들어 주세요. April 7, 2025 at 12:35 PM, 송광진PM FA장비unit : 넵 오후에 현장 확인할게요 April 7, 2025 at 1:35 PM, Varga Tamás Powder : Sziasztok. Poron a Catode raktárban megállt a gép. Utban volt az anyag neki . Elhúztam de nem tudom elindítani. Megtudnátok nézni? Köszönöm April 7, 2025 at 1:37 PM, Varga Tamás Powder : Ugyan az a helyzet az anode raktárban is April 7, 2025 at 1:39 PM, Varga Tamás Powder : Anode megoldódott 😁😁😁 April 7, 2025 at 1:42 PM, Varga Tamás Powder : Katod is megoldódott 😁 April 7, 2025 at 1:52 PM, Szabó Zoltán János : 🙏😇 April 7, 2025 at 1:53 PM, Szabadi Miki : Köszike nagyon jok vagytok 👌 April 7, 2025 at 2:05 PM, Varga Tamás Powder : Elszóltad most magad 😅 catode 3as sornál megállt az AGV.Mikor elakarom indítani ugyan úgy hibára kiáll Megtudjátok nézni? Köszönöm April 7, 2025 at 2:06 PM, Varga Tamás Powder : Meg a palettát is rosszul tette be April 7, 2025 at 2:09 PM, 윤경환 : @FA 양극분체 창고 STK1 Error code: 146. Ready off during forking. 확인 부탁 드립니다. April 7, 2025 at 2:11 PM, Szabadi Miki : Mindjárt megyünk April 7, 2025 at 3:10 PM, Varga Tamás Powder : Sziasztok. Catode oldalt 3as sornál megint megállt az AGV. Megnézitek? Köszönöm April 7, 2025 at 3:11 PM, Szabadi Miki : Igen nemsoká megyünk April 7, 2025 at 4:34 PM, Varga Tamás Powder : Sziasztok az AGV megint megált catode az air showerben. Megtudjátok nézni? Köszönöm April 7, 2025 at 4:35 PM, Kiss Balázs F.A. : Majd megyünk April 7, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 3 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 7, 2025 at 7:16 PM, VK (mcs) : @FA Please check E0CNVC12 port 7 Data mismatch error. April 8, 2025 at 3:19 AM April 8, 2025 at 3:19 AM, Powder tréner : I would like to request the following material from the powder anode warehouse: 5 pallets of 112-00242A and 5 pallets of 112-00247A April 8, 2025 at 3:26 AM, VK (mcs) : Material has been released. April 8, 2025 at 3:28 AM, Powder tréner : Szeretnék kérni az FA kollégák segítséget a raklapok manuális leszedésébe.Köszönöm. April 8, 2025 at 3:28 AM, Powder tréner : Thanks April 8, 2025 at 3:33 AM, Balogh Ádám : Az AGV-ket nemtudjuk használni jelenleg az Anodon mert az air shower ajtaja elromlott April 8, 2025 at 3:34 AM, Mr.Miti (미티) FA : Érkezünk nemsokára. April 8, 2025 at 3:34 AM, Balogh Ádám : @Mr.Miti (미티) FA April 8, 2025 at 3:34 AM, Balogh Ádám : Köszönöm April 8, 2025 at 3:34 AM, Mr.Miti (미티) FA : Szívesen April 8, 2025 at 4:15 AM, Balogh Ádám : Mikor érkeztek kb? mert addig nem tudunk tölteni April 8, 2025 at 4:15 AM, gutenkunstabelzoltan : Uton vagyunk April 8, 2025 at 4:15 AM, Balogh Ádám : Okés April 8, 2025 at 6:07 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10/12(+1) Tech, 1Sl Overtime(0): Holiday(1+1): Kovács Ágnes, (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyi April 8, 2025 at 6:42 AM, Varga Tamás Powder : I would like to request the following material from the powder anode warehouse: 10 pallets of 112-00242A and 10 pallets of 112-00247A April 8, 2025 at 6:44 AM, Varga Tamás Powder : Szeretnék kérni az FA kollégák segítséget a raklapok manuális leszedésébe. Az AGV-ket nemtudjuk használni jelenleg az Anodon mert az air shower ajtaja elromlott. köszönöm. April 8, 2025 at 6:45 AM, Shakir (MCS) : Working on it Thank you April 8, 2025 at 6:52 AM, 윤한수 left this chatroom. April 8, 2025 at 6:55 AM, Szücs Géza FT-B : @Rácz Dániel / FA hamarosan érkezik April 8, 2025 at 7:22 AM, Shakir (MCS) : All the mentioned materials have been released. ✅. Thank you very much! April 8, 2025 at 7:25 AM, Varga Tamás Powder : Thank you very much! April 8, 2025 at 7:26 AM, Shakir (MCS) : You’re welcome April 8, 2025 at 7:32 AM, Rácz Dániel / FA : Itt vagyok AN oldalon April 8, 2025 at 7:34 AM, Varga Tamás Powder : Pillanat és megyek. April 8, 2025 at 8:06 AM, Szabó Zoltán János : Szisztok, Por, Katod 3 soron megallt a robot anyag lerakas kozben. Tul tolta a raklapot, az utkozobe utkozott es a raklapot el is torte. Megnezitek, legyszives? Koszonom. April 8, 2025 at 8:12 AM, Rácz Dániel / FA : Öltözök April 8, 2025 at 8:13 AM, Varga Tamás Powder : Sziasztok. Catode air showerben megállt az AGV. Elvesztette a kommunikációt . Ha lessz időtök megnézitek? Köszönöm April 8, 2025 at 8:13 AM, Rácz Dániel / FA : Jövök April 8, 2025 at 8:24 AM, Rácz Dániel / FA : Powder 1F CA AGV #2 IPC: 10.97.42.222 April 8, 2025 at 8:25 AM, Szücs Géza FT-B : CA oldalra a navitrolba elméletben minden CA AGV fel van véve April 8, 2025 at 8:25 AM, Rácz Dániel / FA : E1PLC31-P02 Node: 156 April 8, 2025 at 8:26 AM, Szücs Géza FT-B : @ACS nekem is a kedvencem April 8, 2025 at 1:33 PM, Varga Tamás Powder : Hello, I would like to request the following material from the powder anode warehouse: 6 pallets 112-00247A April 8, 2025 at 1:44 PM, Varga Tamás Powder : Szeretnék kérni az FA kollégák segítséget a raklapok manuális leszedésébe. Az AGV-ket nemtudjuk használni jelenleg az Anodon mert az air shower ajtaja elromlott és catode 3as sornál kifarolt az AGV megtudnátok nézni? Köszönöm April 8, 2025 at 1:46 PM, Rácz Dániel / FA : Mindjárt ott vagyok April 8, 2025 at 1:49 PM, Shakir (MCS) : All the mentioned materials have been released. ✅. Thank you very much! April 8, 2025 at 2:07 PM, Rácz Dániel / FA : Itt vagyok April 8, 2025 at 2:08 PM, Varga Tamás Powder : Thank you very much! April 8, 2025 at 2:08 PM, Varga Tamás Powder : Mindjárt megyek April 8, 2025 at 2:29 PM, Rácz Dániel / FA : AGV-k kiszabadítva. April 8, 2025 at 3:11 PM, Rácz Dániel / FA : -Paletták leszedve. -AGV-k töltőre küldve. April 8, 2025 at 3:52 PM, Varga Tamás Powder : Sziasztok. Kérhetnék segitséget a por catode 1es sorhoz? Megállt az agv . Úgy érzékeli van valami a közelébe, de nincs semmi se. Köszönöm April 8, 2025 at 3:53 PM, Rácz Dániel / FA : Nem sokára ott vagyok ! Van porbetöltés ? April 8, 2025 at 4:30 PM, Rácz Dániel / FA : Itt vagyok April 8, 2025 at 4:52 PM, Rácz Dániel / FA : Kész April 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 8, 2025 at 8:30 PM, Powder tréner : I would like to request the following material from the powder anode warehouse: 10 pallets of 112-00242A and 5 pallets of 112-00247A.Thanks. April 8, 2025 at 8:33 PM, Powder tréner : If possible 112-00242A I would like to request first. Thank you April 8, 2025 at 8:33 PM, VK (mcs) : Sure April 8, 2025 at 8:36 PM, Powder tréner : Thanks April 8, 2025 at 8:38 PM, VK (mcs) : 10 pallets 112-00242A Has been released. April 8, 2025 at 8:42 PM, Balogh Ádám : Sziasztok szeretnék kérni F.A-s kollégát a paletták leszedéséhez April 8, 2025 at 8:46 PM, Mr.Miti (미티) FA : Érkezünk April 9, 2025 at 3:40 AM April 9, 2025 at 3:40 AM, Powder tréner : I would like to request the following material from the powder anode warehouse: 5 pallets of 112-00242A.Thanks. April 9, 2025 at 3:41 AM, Powder tréner : Helló szeretnék kérni F.A-s kollégát a paletták leszedéséhez April 9, 2025 at 3:44 AM, VK (mcs) : Material released. April 9, 2025 at 6:18 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13 Overtime (0):- Sick (2):Nagy Zsolt, Kasztel Balázs Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(3): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 9, 2025 at 6:50 AM, Varga Zoltán : Good morning we need these materials on powder anode side: 10 palletts m36h 112-00247A 10 palletts cp3k 112-00242A 1 pallets SI 112-00249A Thank you És kérek segítséget a levételhez Köszönöm April 9, 2025 at 6:50 AM, Mohammad Amir : Good morning, Working on it! April 9, 2025 at 6:51 AM, Szabadi Miki : Agv nem müködik ? April 9, 2025 at 6:52 AM, Varga Zoltán : Air shower rossz ez miatt nem sajnos April 9, 2025 at 6:53 AM, Szabadi Miki : Erről nem tudtunk , rendben Akkor megyünk April 9, 2025 at 6:53 AM, Kiss Balázs F.A. : Érkezünk majd April 9, 2025 at 6:55 AM, Mohammad Amir : We have released Daejoo(112-00249A) , please collect it from the E0CNVA12_P07. ✅ Working on the rest of materials. Thank you very much! April 9, 2025 at 7:01 AM, Mohammad Amir : For your information, We have released all the requested materials successfully ✅. Please collect it from the O/P ports of CNVA12. Thank you very much! April 9, 2025 at 8:47 AM, Oláh András : @Varga Zoltán valaki tud jönni elvinni a palettákat? Már nem sok van amit ki kéne vennünk April 9, 2025 at 10:31 AM, 윤경환 : @FA 양극분체 창고 2번 포트 센서 확인 좀 부탁 드립니다. 센서가 틀어졌는지 아무 팔렛이나 투입 해도 오버 사이즈 발생 한다고 합니다. April 9, 2025 at 11:27 AM, 문진영 : 분체 포트 오버사이즈 센서 심하게 휘어 임시로 조치했는데 화물 입고 시 주의 부탁드립니다. 추가로 이번 입고 파레트 바닥이 휘어 있어 반송이 안되고 있는데 이 부분 이력 좀 확인 부탁드립니다. April 9, 2025 at 12:54 PM, Varga Zoltán : Sziasztok poron katód oldalon az AGV nem veszi ki az anyagot nézzétek meg légyszi z April 9, 2025 at 12:55 PM, Szabadi Miki : Rendben nemsoká megyünk April 10, 2025 at 5:46 AM April 10, 2025 at 5:46 AM, Varga Zoltán : Jó reggelt agv megállt por katód raktár előtt majd nézzétek meg légyszi April 10, 2025 at 6:00 AM, Szabadi Miki : Nemsoká megyünk April 10, 2025 at 6:03 AM, Varga Zoltán : Good morning we need these materials on powder anode side: 1 pallets SI 112-00249A Thank you És kérek segítséget a levételhez vagy küldjétek az egyes sorra Köszönöm April 10, 2025 at 6:04 AM, Mohammad Amir : Good morning, We are working on it! April 10, 2025 at 6:07 AM, Mohammad Amir : We have released Daejoo(112-00249A) , please collect it from the E0CNVA12_P07. ✅ Thank you very much! April 10, 2025 at 6:19 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt, Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(4): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel, Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 10, 2025 at 5:56 PM, 윤경환 : @FA @KIM SEYEON [김세연]_FA 피엠님 안녕하세요. 저희가 양극 분체 투입중인데 2번 포트에 투입 하다가 센서를 건드린 모양 입니다. 오버 사이즈 알람 발생 하고 있는데 일단 1,3번으로 투입 할테니 시간 나실때 확인 좀 부탁 드려도 될까요? 한 26plt 만 투입 하면 저희는 투입 종료 입니다. April 10, 2025 at 6:20 PM, Powder tréner : Szászok Por Anod oldalon a raktárnál megált az AVG nézétek meg köszi April 10, 2025 at 6:21 PM, Marsi Gábor : Megyünk April 10, 2025 at 6:41 PM, Marsi Gábor : Kész April 11, 2025 at 6:13 AM April 11, 2025 at 6:13 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12(+1) Tech, 1Sl Overtime(0): Holiday(2+1): Rácz Dániel, Czeilinger Krisztián (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Csanálosi Gábor, Böröcz Tamás --------------- Assy GF (2): Pintye Miklós, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 11, 2025 at 1:33 PM, Varga Zoltán : Sziasztok poron katódon megállt az AGV nézzétek meg meg légyszi köszönöm April 11, 2025 at 1:35 PM, Csanálosi Gábor FA : @Szücs Géza FT-B fork bumper April 11, 2025 at 1:35 PM, Csanálosi Gábor FA : Line 2 p01 April 11, 2025 at 1:39 PM, Szücs Géza FT-B : akkor ott tört a raklap April 11, 2025 at 1:42 PM, Varga Zoltán : A raklap megúszta, csak nem áll ki onnan az AGV April 11, 2025 at 1:59 PM, Szücs Géza FT-B : a mögötte lévő node-ra kell küldeni, go with offsettel, ami a manual / driveing menüben van April 11, 2025 at 2:01 PM, Csanálosi Gábor FA : 27-es node April 11, 2025 at 2:26 PM, Varga Zoltán : Kőszönöm April 11, 2025 at 2:28 PM, Varga Zoltán : We pushed LR button on powder cathode E1PLC031-P01 But materials dont come out from automatic warehouse. Can someone help please? April 11, 2025 at 2:30 PM, Varga Zoltán : P02 sorry April 11, 2025 at 2:32 PM, Szücs Géza FT-B : elindítottam a darut April 11, 2025 at 2:33 PM, Varga Zoltán : Már viszi is köszönöm April 11, 2025 at 3:59 PM, Molnár Ferenc : Sziasztok! A kis kocsi (RTV-CV01) meg állt. Run time over alarm. Por raktár foldszint katód oldalon. April 11, 2025 at 3:59 PM, Molnár Ferenc : Segítsetek légyszíves! April 11, 2025 at 4:09 PM, Szücs Géza FT-B : úton a segítség April 11, 2025 at 5:11 PM, Varga Zoltán : Sziasztok katód kifarolt kicsit az AGV és megállt megnéznétek légyszives. Köszönöm April 11, 2025 at 5:11 PM, Varga Zoltán : Poron April 11, 2025 at 5:12 PM, KIM SEYEON [김세연]_FA : @지석범PM (이반차FA) @이주봉PM LEE JUBONG(FA) 피엠님 분체GF RTV가 안움직인다고 하는데 현장 확인 부탁드립니다. April 11, 2025 at 5:14 PM, 지석범PM (이반차FA) : 넵 알겠습니다. April 11, 2025 at 5:16 PM, Csanálosi Gábor FA : Ráindítottam, de lehet elkapar, mert haladni nem látom April 11, 2025 at 5:17 PM, Szücs Géza FT-B : Belső Stopper fel akar jönni, de nem tud April 11, 2025 at 5:17 PM, Szücs Géza FT-B : RTV CV üeg meg se mozdul April 11, 2025 at 5:19 PM, Varga Zoltán : Az meglehet, az előbb is elkapart April 11, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 11, 2025 at 7:02 PM, 윤경환 : @KIM SEYEON [김세연]_FA @지석범PM (이반차FA) 피엠님들 덕분에 분체 투입 완료 하였습니다. 감사 합니다. April 11, 2025 at 10:38 PM, Powder tréner : Sziasztok,szeretnék kérni segítséget,powder Katód oldalon elakadt az AGV (ferdén berakta a paletát a portba és elakadt nem reagál semire).Köszönöm. April 11, 2025 at 10:45 PM, adambenczik : Itt vagyunk April 12, 2025 at 12:12 AM April 12, 2025 at 12:12 AM, Powder tréner : Hello,powder Katod E1PLC0321_P02 port-ra rendelt anyagot automata raktár nem adja ki. Nézzétek rá. April 12, 2025 at 12:21 AM, VK (mcs) : @FA Please check Cathode powder STK C13 Hoist time over error! April 12, 2025 at 1:17 AM, Zagyva Tamás : Poron a katód oldalon az airshowerben elakadt az AGV. Meg tudnátok nézni? Köszönöm April 12, 2025 at 1:17 AM, adambenczik : Úton vagyunk April 12, 2025 at 2:25 AM, Powder tréner : Heló,Katódon poron megint ferdén betete a paletát az AGV. April 12, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása válto April 12, 2025 at 6:30 AM, Szücs Géza FT-B : @Powder tréner @Varga Tamás Powder @Szabó Zoltán János Sziasztok, légyszives ismertessétek velünk a mai termelési tervet (ha a birtokotokban van). Köszönjük szépen. April 12, 2025 at 6:31 AM, Szabó Zoltán János : Szia Katoddal fogunk menni, ha minden igaz. ☺️ April 12, 2025 at 10:37 AM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a 4es sornál az AGV elvesztette a kommunikációt miközben vitte volna az anyagot a 3as sorra. Megtudnátok nézni? Köszönöm April 12, 2025 at 10:47 AM, Szabadi Miki : Igen nemsoká megyünk April 12, 2025 at 10:51 AM, Czeilinger Krisztián : This message was deleted. April 12, 2025 at 11:59 AM, Varga Tamás Powder : Sziasztok a poron a 3as sornál rosszúl tette be a raklapot az AGV és kiált hibára. Megnéznétek? Köszönöm April 12, 2025 at 11:59 AM, Varga Tamás Powder : Katod oldalt April 12, 2025 at 11:59 AM, Szücs Géza FT-B : pillanat April 12, 2025 at 12:16 PM, Szücs Géza FT-B : kész April 12, 2025 at 3:28 PM, Szabó Zoltán János : Katod 3 sor mellett poron megallt a robot. Megnezitek, legyszives? Koszonom April 12, 2025 at 3:34 PM, Varga Tamás Powder : Sziasztok a poron a katodon a 6os sor mögött megállt 2 AGV az egyik várakozik a másik nincs pozicióba. Megtudnátok nézni? Köszönöm April 12, 2025 at 3:36 PM, Szabadi Miki : Igen megyünk April 12, 2025 at 4:18 PM, Czeilinger Krisztián : This message was deleted. April 12, 2025 at 5:51 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2+2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 6:21 AM April 13, 2025 at 6:21 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Fabriczius Gergely, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztá April 13, 2025 at 8:01 AM, Varga Tamás Powder : Sziasztok a poron katod raktárban az anyagot nem veszi le. Megnéznétek? Köszönöm April 13, 2025 at 8:03 AM, Szücs Géza FT-B : úton a segítség April 13, 2025 at 8:37 AM, Szücs Géza FT-B : @MCS please change the PS111-2502130184 carrier current machine to E0PGVC11_VC02 April 13, 2025 at 8:40 AM, duzzaman Md (MCS) : Carrier has been updated. Thank you April 13, 2025 at 8:41 AM, Szücs Géza FT-B : This message was deleted. April 13, 2025 at 8:44 AM, Szücs Géza FT-B : Thank You April 13, 2025 at 9:39 AM, Varga Tamás Powder : Sziasztok a poron katod airahowerban megállt az AGV. megtidjátok nézni? Köszönöm April 13, 2025 at 9:44 AM, Varga Tamás Powder : Esetleg egy ember fent tudna maradni a poron? Mert sűrün AGV problémába ütközünk. @Szücs Géza FT-B April 13, 2025 at 9:51 AM, Szücs Géza FT-B : úton, pill April 13, 2025 at 10:55 AM, Szabó Zoltán János : Ismét megállt a tudomány. Anódon és katódon is. April 13, 2025 at 10:55 AM, Rácz Dániel / FA : Jövök April 13, 2025 at 11:03 AM, Szabó Zoltán János : Ha van erre kapacitasotok ennek orulnenk, ha itt tudna lenni valaki keszenletben. Koszonom April 13, 2025 at 11:04 AM, Szücs Géza FT-B : egyedül senki sem dolgozhat . mi is kevesen vagyunk :( April 13, 2025 at 11:05 AM, Szabó Zoltán János : Ertem April 13, 2025 at 11:06 AM, Szabó Zoltán János : Ti nem tudtok valakinek jelezni ezzel kapcsolatban? Naprol napra nem hogy jobb, szarabb a rendszer. Valaki igazan megcsinalhatna a programozok kozul. April 13, 2025 at 11:08 AM, Szücs Géza FT-B : minden műszakvezető jelzi, folyamatosan, hogy az egész gyárra 10-12 technikus nem elég (egész gyár= Electroda+Assi+Modul+Formázás) April 13, 2025 at 11:09 AM, Szabó Zoltán János : Felre ertettel! Nem azt mondtam, hogy ti oldjatok meg a jelenlegi allando hibat es programozzatok ti, koreai reszrol lenne jo ha valaki megcsinalna ezt az egeszet! April 13, 2025 at 11:11 AM, Csanálosi Gábor FA : Szerintem ha csak rajtunk múlna, és meglennének a jogköreink, át lenne adva, a magyar csapat már megoldotta volna. ;) April 13, 2025 at 11:11 AM, Szücs Géza FT-B : nagyon szivesen programoznánk többen is, a kedv, elhivatottság, kitartás megvan, de a feltételek és létszám nincs biztosítva. Ugyan úgy, ahogy nálatok sem elég pl a létszám... April 13, 2025 at 11:12 AM, Rácz Dániel / FA : Itt vagyok April 13, 2025 at 11:13 AM, Rácz Dániel / FA : AN oldalon a paletta volt neki útban Bank4-el ideiglenesen tovább megy April 13, 2025 at 11:20 AM, Szücs Géza FT-B : CA oldalon is baj van April 13, 2025 at 11:23 AM, Rácz Dániel / FA : Ca oldalon az E1PLC031-P01-nél manulban volt az ACS szerint, 28-as Node-ra küldés go with offset-el, autostart. April 13, 2025 at 11:24 AM, Szücs Géza FT-B : kacsints ha túsz vagy April 13, 2025 at 11:24 AM, Rácz Dániel / FA : Most visszaáll a portra April 13, 2025 at 11:24 AM, Szücs Géza FT-B : ohh April 13, 2025 at 11:24 AM, Szabó Zoltán János : El raktam onnan azt a ketto raklapot, ne legyen akadaly neki. April 13, 2025 at 11:25 AM, Rácz Dániel / FA : Köszi April 13, 2025 at 11:25 AM, Rácz Dániel / FA : @Szücs Géza FT-B megnéznéd hogy úgy érzékeli e hogy van rakta paletta ? April 13, 2025 at 11:26 AM, Szücs Géza FT-B : AGV transfering Porton rajta a paletta száma April 13, 2025 at 11:27 AM, Rácz Dániel / FA : Már nincs itt a paletta April 13, 2025 at 11:27 AM, Rácz Dániel / FA : A P02-ön van April 13, 2025 at 11:28 AM, Rácz Dániel / FA : LD/UD step timeout April 13, 2025 at 11:28 AM, Szücs Géza FT-B : akkor küld a 28ra vissza és pill April 13, 2025 at 11:28 AM, Rácz Dániel / FA : Köszönöm April 13, 2025 at 11:29 AM, Szücs Géza FT-B : 188 a vége a carrier ID-nak? April 13, 2025 at 11:29 AM, Rácz Dániel / FA : Az lehetett mert a mellette lévő 187, a következőé pedig 189 April 13, 2025 at 11:30 AM, Szücs Géza FT-B : @MCS please change the PS111-2502130188 carrier current machine to E1PPLC031_P02 April 13, 2025 at 11:30 AM, Szücs Géza FT-B : még ne tedd vissza autoba April 13, 2025 at 11:31 AM, Rácz Dániel / FA : Nem April 13, 2025 at 11:31 AM, Szücs Géza FT-B : ? April 13, 2025 at 11:31 AM, Rácz Dániel / FA : E1PLC031-P02 P111-2502130187 April 13, 2025 at 11:31 AM, Rácz Dániel / FA : Ez a paletta itt is van April 13, 2025 at 11:32 AM, Rácz Dániel / FA : A P01-en nincs paletta sem az AGV-n April 13, 2025 at 11:32 AM, Szücs Géza FT-B : szerintem kevered őket April 13, 2025 at 11:32 AM, Szücs Géza FT-B : ACS-ből nézem April 13, 2025 at 11:32 AM, Rácz Dániel / FA : 156-os node-ra akar beállni April 13, 2025 at 11:33 AM, Rácz Dániel / FA : A felirat szerint írtam be April 13, 2025 at 11:33 AM, Szücs Géza FT-B : Baszki ezt ki akarja hozni April 13, 2025 at 11:33 AM, Szücs Géza FT-B : @Varga Tamás Powder vagy valamerre? April 13, 2025 at 11:33 AM, Varga Tamás Powder : Megyek April 13, 2025 at 11:33 AM, Rácz Dániel / FA : Köszi April 13, 2025 at 11:34 AM, Rácz Dániel / FA : A P02-ön UL be van nyomva April 13, 2025 at 11:34 AM, Szücs Géza FT-B : @Rácz Dániel / FA a raklapon kartondobozps az anyag? April 13, 2025 at 11:35 AM, Rácz Dániel / FA : Nem, zsákos. April 13, 2025 at 11:35 AM, Szücs Géza FT-B : Tomi bemegy megnézni, pill April 13, 2025 at 11:35 AM, Rácz Dániel / FA : E1PLC031-P01 LD E1PLC031-P02 UL April 13, 2025 at 11:36 AM, Rácz Dániel / FA : Request van benyomva April 13, 2025 at 11:36 AM, Szücs Géza FT-B : értem, csak nem tom miért. szal ki kell zárni, hogy véletlenül rossz gombot nyomtak. ha jó oda az áru, akkor inkább törölni kell az ordert April 13, 2025 at 11:37 AM, Rácz Dániel / FA : AGV #2 akarja hozni a P01-re az anyagot April 13, 2025 at 11:37 AM, Rácz Dániel / FA : Rendben April 13, 2025 at 11:38 AM, Szücs Géza FT-B : tudom, de az Opik szüneteznek szerencsére April 13, 2025 at 11:38 AM, Rácz Dániel / FA : Csak akkor miért az üres portra akar beállni a AGV #3 ? April 13, 2025 at 11:38 AM, Szücs Géza FT-B : akkor a szenzorokat és a prizmákat ellenőrizd légyszives April 13, 2025 at 11:39 AM, Rácz Dániel / FA : Mit akar elvinni nincs itt semmi 😞 April 13, 2025 at 11:39 AM, Rácz Dániel / FA : Rendben April 13, 2025 at 11:39 AM, Szücs Géza FT-B : most esett le... bástya... April 13, 2025 at 11:39 AM, Szücs Géza FT-B : tuti hogy szenzor hiba April 13, 2025 at 11:39 AM, Varga Tamás Powder : @Szücs Géza FT-B nincs az AGVn anyag, de amúgy meg dobozos anyagok vannak csak itt April 13, 2025 at 11:39 AM, Szücs Géza FT-B : ACS szerint van áru rajta April 13, 2025 at 11:40 AM, Szücs Géza FT-B : és akkor a portokon sincs anyag... igye? April 13, 2025 at 11:40 AM, Varga Tamás Powder : Nincs anyag a porton April 13, 2025 at 11:41 AM, Varga Tamás Powder : Most megy ki a 3as AVG April 13, 2025 at 11:41 AM, Szücs Géza FT-B : az én voltam April 13, 2025 at 11:43 AM, Varga Tamás Powder : A 2es AGV rosszul tette le a palettát April 13, 2025 at 12:35 PM, Rácz Dániel / FA : @Szabó Zoltán János @Varga Tamás Powder Itt leszek fent AN oldalon. April 13, 2025 at 12:36 PM, Szabó Zoltán János : Rendben Koszonjuk szepen 🙏 April 13, 2025 at 12:36 PM, Varga Tamás Powder : Rendben April 13, 2025 at 2:31 PM, Varga Tamás Powder : Sziasztok. Poron katod raktárban nem vette le az anyagot. Megnézitek? Köszönöm April 13, 2025 at 2:31 PM, Rácz Dániel / FA : Pántoló szalagban elakadt a villa. April 13, 2025 at 2:36 PM, Rácz Dániel / FA : Pántoló szalag elvágása, AGV manualban visszamozgatás a 8-as Node pontra. Autostart. April 13, 2025 at 2:49 PM, Rácz Dániel / FA : CA AGV #3 megállt az airshowerben. Bementem utána, de nem csinàltam semmit elindult magától. Hibaüzenet nem volt. April 13, 2025 at 3:06 PM, Rácz Dániel / FA : Valaki nyomott egy unload requestet a E1PLC031_P01-re ? April 13, 2025 at 3:11 PM, duzzaman Md (MCS) : FYI Last UR for this port was received at 15:00:57.286 April 13, 2025 at 3:14 PM, Rácz Dániel / FA : CA E1PLC031_P01 paletta érzékelő szenzor beállítása. UL request order törlése. April 13, 2025 at 3:25 PM, Szücs Géza FT-B : lassan minden porton állítani kell XD April 13, 2025 at 3:26 PM, Rácz Dániel / FA : CA E1PLC031_P02 paletta érzékelő szenzor beállítása. UL request order törlése. April 13, 2025 at 3:28 PM, Rácz Dániel / FA : A hiba oka lehet, hogy a palettát nem pontosan teszi le az AGV. Ezért a szenzortartó konzol elmozdul. April 13, 2025 at 3:32 PM, Mr.Miti (미티) FA : Pontosan ez a az egyik hiba. A hiba C/V porton keletkezik mikor az AGV felveszi a palettát. Rendszeresen elakad pantolásba a villa, ezért ferdén kerül fel az AGV villára a raklap. April 13, 2025 at 3:33 PM, Rácz Dániel / FA : CA AGV #3 megint megállt az airshowerben 😞 April 13, 2025 at 3:33 PM, Szücs Géza FT-B : @Rácz Dániel / FA ivánsvá akkor többször is kellett szenzort állítanod az E1PLC031 P01-en és P02-n is, ugye? April 13, 2025 at 3:33 PM, Szücs Géza FT-B : legalább tudjuk, hogy főként a 3as ilyen April 13, 2025 at 3:37 PM, Rácz Dániel / FA : 2x biztosan April 13, 2025 at 3:45 PM, Szücs Géza FT-B : miszter széfti error sem hallatja a hangját? April 13, 2025 at 3:58 PM, Rácz Dániel / FA : [ERR136] [M6136] SPARE April 13, 2025 at 3:59 PM, Rácz Dániel / FA : [WAR151] [M5650] Slowed Down Supervisor April 13, 2025 at 4:00 PM, Rácz Dániel / FA : Ezek vannak az alarm historyban a CA AGV #3-ban. April 13, 2025 at 4:08 PM, Rácz Dániel / FA : Ca AgV #2 ready on timeout, ready off alarm hibával meg állt a E0CNVC12_P07-es porton. April 13, 2025 at 4:35 PM, Rácz Dániel / FA : CA AGV #2 megállt az airshower előtt. Jövök. April 13, 2025 at 4:38 PM, Varga Tamás Powder : Pont most akartam irni😁😁 April 13, 2025 at 4:48 PM, Rácz Dániel / FA : Ca AGV #2 megállt Shower Step Timeout hibával a 110-es Node ponton. April 13, 2025 at 6:18 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 10:32 PM, (Unknown) left this chatroom. April 14, 2025 at 7:14 AM April 14, 2025 at 7:14 AM, Powder tréner : Hali a Por katod oldalon az AVG nem viszi az alapanyagot be a területre meg nézitek April 14, 2025 at 7:18 AM, Zagyva Tamás : Jöttök megnézni?Nem tudunk tölteni April 14, 2025 at 7:18 AM, Farkas Tamàs : Sziasztok Megyünk April 14, 2025 at 7:20 AM, Zagyva Tamás : Oké.Köszi April 14, 2025 at 9:00 AM, Powder tréner : Por katod oldalon megált az AVG a termelésben meg nézitek April 14, 2025 at 9:01 AM, Marsi Gábor : Nézem April 14, 2025 at 9:01 AM, Marsi Gábor : Nemsokára érkezem April 14, 2025 at 9:01 AM, Powder tréner : Okés köszi April 14, 2025 at 2:33 PM, Powder tréner : Hali a Por Anod oldalon kértünk anyagot de csak egyet vit-be az AVG meg nézitek April 14, 2025 at 2:35 PM, Marsi Gábor : Nem látok több lekérést April 14, 2025 at 2:51 PM, Mohammad Amir : For PLA011_P01 carrier is on the way. We don't see see any job requested for other Anode powder machine. Thank you very much! April 14, 2025 at 2:56 PM, Mohammad Amir : For E1PLA011_P01 ,AGV #1 on the way. ✅ Thank you very much! April 14, 2025 at 4:25 PM, Zagyva Tamás : Sziasztok Poron katód 3-as betöltőnèl megakadt az AGV.Meg tudnátok nézni? April 14, 2025 at 4:26 PM, Marsi Gábor : Megyek April 14, 2025 at 4:36 PM, Marsi Gábor : Kész April 14, 2025 at 4:39 PM, Zagyva Tamás : Kösz April 14, 2025 at 6:48 PM, Varga Zoltán : Sziasztok E1PLC031-P01 LR gombot nyomva nem reagál semmit. Meg tudnátok nézni légyszi? Köszönöm April 14, 2025 at 6:48 PM, Szabadi Miki : Igen megyünk April 14, 2025 at 9:00 PM, Varga Zoltán : Sziasztok katód raktár előtt AGV megállt hibát nem ír ki . Meg tudnátok nézni légyszi? April 14, 2025 at 9:01 PM, Varga Zoltán : Poron April 14, 2025 at 9:01 PM, Szabadi Miki : Igen megyünk April 14, 2025 at 9:04 PM, Varga Zoltán : Elindult, megtöröltem a szenzorát és jó lett. Már veszi le az anyagot April 14, 2025 at 9:06 PM, Szabadi Miki : Szuper köszi April 14, 2025 at 9:21 PM, Varga Zoltán : Raklap lerakás után nem jön ki az anyag alól a raklapot rosszul rakta le katód 3- nál. Gyertek légyszi April 14, 2025 at 9:24 PM, Kiss Balázs F.A. : Érkezünk majd April 15, 2025 at 3:00 AM April 15, 2025 at 3:00 AM, Varga Zoltán : AGV nem tudja levenni a raklapot katód oldalon a poron, mert elakadt a villa és vissza tolta a raklapot. Segítsetek légyszi April 15, 2025 at 3:00 AM, Szabadi Miki : Megyünk April 15, 2025 at 6:20 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "D" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Szabadi Miklós Oláh András ———————————— Assembly(6+1): Zsurbej Zsolt Novák Károly Novák Zoltán Kovács Szabolcs Kasztel Balázs Nagy Zsolt ———————————— Formation/Modul(3): Magyar Balázs Nagy Gábor Martina Dávid ———————————— April 15, 2025 at 6:39 PM, Varga Zoltán : Sziasztok poron katód #3-nál nem áll ki az anyag alól az AGV nézzétek meg légyszi köszönöm April 15, 2025 at 6:42 PM, Szabadi Miki : Mindjárt megyünk April 15, 2025 at 6:42 PM, Varga Zoltán : Közben anód oldalon is gond van April 15, 2025 at 6:42 PM, Szabadi Miki : Rendben April 15, 2025 at 9:12 PM, Varga Zoltán : Poron Anód raktár előtt megállt az AGV nem veszi le az anyagot nézzétek meg légyszi April 15, 2025 at 9:12 PM, Szabadi Miki : Megyünk nemsoká April 15, 2025 at 9:12 PM, Varga Zoltán : Köszönöm April 16, 2025 at 6:17 AM April 16, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(2): Boromisza Zoltán, Pintye Miklós Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Rácz Dániel --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 16, 2025 at 9:52 AM, Szücs Géza FT-B : szóban jelzett GF CA 2es manual port szenzor beállítását elvégeztem, kész April 16, 2025 at 9:53 AM, Molnár Ferenc : Köszönöm April 16, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 6:16 AM April 17, 2025 at 6:16 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 8/12 Tech, 1Sl Overtime(0): Holiday(2): Csanálosi Gábor, Pintye Miklós Sick(1): Gerbovits Kevin, kovács Ágnes --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Rácz Dániel, Böröcz Zamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 17, 2025 at 6:48 AM, Szabó Zoltán János : Sziasztok, @Szücs Géza FT-B Végül katódra is kell töltenünk port. Gondoltam szólok, hogy amit beszéltünk műszak elején, már módosult. April 17, 2025 at 6:51 AM, Szücs Géza FT-B : nagyon szépen köszönöm az infót April 17, 2025 at 7:57 AM, Varga Tamás Powder : Sziasztok a Poron katod oldalt a 2es AGV a 2es soron az E1PLC021P02-es portra rosszúl tette le a raklapot és szét is törte. Ugyan úgy kiállt a paletta alól és megy tovább, ránéznétek hogy mi lehet a baj amiért így tette le a raklapot? Köszönöm April 17, 2025 at 8:04 AM, Szücs Géza FT-B : megyek April 17, 2025 at 8:04 AM, Szücs Géza FT-B : CA StK újra üzemel April 17, 2025 at 9:26 AM, Szücs Géza FT-B : minden területen, mindenki türelmét szeretném kérni. A technikusi létszám a mai napon rendkívül alacsony. minden szintre csak 2 technikus van. April 17, 2025 at 9:26 AM, Szücs Géza FT-B : jó, mondjuk poron 1 sincs 😭 April 17, 2025 at 9:40 AM, duzzaman Md (MCS) : @FA Kindly check - E0STKA11_P02: Safety door error E0CNVA11_RTV01: Safety door error E0STKC35_M01 : Data off, Sensor on Overtime error Thank you April 17, 2025 at 9:42 AM, Szücs Géza FT-B : i think the vendor working on it.... He just forgot to tell us, again April 17, 2025 at 9:43 AM, Szücs Géza FT-B : i will check April 17, 2025 at 9:43 AM, duzzaman Md (MCS) : Appreciate your support greatly. April 17, 2025 at 9:47 AM, Szabó Zoltán János : Sziasztok, Por, Katod 2 soron rosszul rakta le a robot a palettat. Ki allt hibara. Szeretnek segitseget kerni a helyreallitasaban. Koszonom April 17, 2025 at 9:51 AM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Cathode warehouse to GF port. UNKDUP-PS111-2502110066 UNKDUP-PS111-2502110009 UNKDUP-PS111-2502110016 April 17, 2025 at 9:52 AM, Shakir (MCS) : Working on it April 17, 2025 at 9:56 AM, Szücs Géza FT-B : megyek April 17, 2025 at 9:59 AM, Szücs Géza FT-B : Vendor workink on E0STKA11. Please dont report the errors April 17, 2025 at 9:59 AM, Szücs Géza FT-B : @mcs April 17, 2025 at 10:06 AM, Shakir (MCS) : Job has been initiated successfully ✅ , You can collect the carrier’s from E0CNVC11_M01~M03. Currently, Vendors working on powder STK11 and RTV because of this jobs are alternated whenever it comes INSERVICE, job will be executed. Thank you April 17, 2025 at 10:20 AM, Szücs Géza FT-B : ez is kész és AN oldal is April 17, 2025 at 10:21 AM, Szabó Zoltán János : Danke April 17, 2025 at 10:22 AM, 윤경환 : Thank you. April 17, 2025 at 10:22 AM, Shakir (MCS) : You’re welcome April 17, 2025 at 10:26 AM, 윤경환 : @ FA 양극분체 STK1 10.Hoist time over error 확인 부탁 드립니다. April 17, 2025 at 10:27 AM, Szücs Géza FT-B : STKA11? April 17, 2025 at 10:27 AM, 윤경환 : STKC11 April 17, 2025 at 10:28 AM, Szücs Géza FT-B : nézem April 17, 2025 at 10:30 AM, Szücs Géza FT-B : done April 17, 2025 at 10:30 AM, 윤경환 : Thank you. April 17, 2025 at 11:38 AM, 윤경환 : @FA STKC11 Please check Error. 146.Ready off During Forking. April 17, 2025 at 12:41 PM, 윤경환 : @FA STKC11 Please check it. Lost Data Alarm. April 17, 2025 at 12:41 PM, Szücs Géza FT-B : we will check. please wait 30-40 min April 17, 2025 at 1:16 PM, 윤경환 : Thank you. April 17, 2025 at 1:27 PM, Szabó Zoltán János : Anod raktarnal, anyag kivetel kozben megallt a robot. Help please. April 17, 2025 at 1:37 PM, Szücs Géza FT-B : mkész April 17, 2025 at 1:37 PM, Szücs Géza FT-B : megyek April 17, 2025 at 1:48 PM, Szabó Zoltán János : Rossz hirem van. Ures jaratban levo ki allt hibara a raktar elott. April 17, 2025 at 1:50 PM, Varga Tamás Powder : Sziasztok. Poron anod oldalt a 2es soron 3as AGV kuállt hibára és az anyagot se tette le. Megnéznétek? Köszönöm April 17, 2025 at 1:59 PM, Shakir (MCS) : @FA @ACS Please check AGV#03 Unload failed at E1PLA021_P01. Rear Bumper detect Thank you April 17, 2025 at 2:00 PM, Szücs Géza FT-B : kész April 17, 2025 at 2:00 PM, Szabó Zoltán János : Ez megoldva vegul April 17, 2025 at 2:04 PM, Szücs Géza FT-B : most jöttem le. még nem ebédeltem, most fogok. jelenleg minden technikus tiszta téren belül dolgozik, kérem várjon. April 17, 2025 at 2:09 PM, Szabó Zoltán János : Azota ismet kiallt hibara. April 17, 2025 at 2:12 PM, Szücs Géza FT-B : van valaki valamelyik AGV közelében? ha nincs megpróbálom távolról, de csak ha nincs körölöttük senki April 17, 2025 at 2:13 PM, Szabó Zoltán János : Nincs. Csinalhatod, meg szoltam a sracoknak, hogy ne legyenek a kozelebe April 17, 2025 at 2:15 PM, Szücs Géza FT-B : kezdem April 17, 2025 at 2:16 PM, Szücs Géza FT-B : a termelésben lévőnek kell egy auto mode gomb, ami az initial fülön van (a 3asnak) April 17, 2025 at 3:23 PM, 윤경환 : @FA STKC11 Please check it. 42. Travel Driver Error. April 17, 2025 at 3:32 PM, Szücs Géza FT-B : .checking April 17, 2025 at 3:33 PM, Szücs Géza FT-B : working April 17, 2025 at 3:42 PM, 윤경환 : Thank you. April 17, 2025 at 3:48 PM, Varga Tamás Powder : Sziasztok poron katod oldalt az air shower elött megállt az AGV. Megnézitek? Köszönöm April 17, 2025 at 4:08 PM, Szücs Géza FT-B : indulok April 17, 2025 at 4:48 PM, Szücs Géza FT-B : minden is készen van April 17, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician, 1 Sl, ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 6:22 PM, 윤경환 : @FA STKC12 Please check it. 184. SCP Temp Error. April 17, 2025 at 7:12 PM, Shahbaz 샤바즈 MCS/RTD : @FA E0STKA12 Please check it. MCP control power CP Thank you April 17, 2025 at 7:15 PM, adambenczik : Solved April 17, 2025 at 7:17 PM, 윤경환 : Thank you. April 17, 2025 at 7:36 PM, adambenczik : The FA team has tryied to solved the issues but we couldn't. We are waiting for help April 17, 2025 at 8:34 PM, Mr.Miti (미티) FA : Solved April 18, 2025 at 12:33 AM April 18, 2025 at 12:33 AM, Powder tréner : Sziasztok szeretnék kérni segítséget. PORON Katódon E1PLC021-P02 Porton nem működik a szenzor nem tudunk anyagot bekérni? April 18, 2025 at 12:38 AM, gutenkunstabelzoltan : Nem latom mi a baj de mindjart felmegyek April 18, 2025 at 1:15 AM, adambenczik : Kész is April 18, 2025 at 8:43 AM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Cathode warehouse to GF port. UNKDUP-PS111-25011xxxx 30 pallet. April 18, 2025 at 8:44 AM, Shakir (MCS) : Checking April 18, 2025 at 8:45 AM, Yoon : thanks April 18, 2025 at 8:51 AM, Shakir (MCS) : UNKDUP-PS111-250211xxxx This series available in STK. Please confirm that Thank you April 18, 2025 at 8:52 AM, 윤경환 : That's right. April 18, 2025 at 8:52 AM, Shakir (MCS) : Thank you working on it April 18, 2025 at 8:52 AM, 윤경환 : Thank you. April 18, 2025 at 9:22 AM, Yoon : after that we will ask you 30plt / 17plt more. we need a 77plt port out today. April 18, 2025 at 9:24 AM, Shakir (MCS) : Sure, I already initiated job for 24 out of 30 pallets after that I will send required pallets too. Thank you April 18, 2025 at 9:26 AM, Yoon : yes thanks but we will also input a 77plt again today. coz we ask you for a divided request. when we got a 30plt then input again. after outport for 30plt again. plz holding it more 30plt. April 18, 2025 at 9:27 AM, Yoon : 30 plt out after 30 plt in April 18, 2025 at 9:34 AM, Shakir (MCS) : 30 pallets has been released to M01~M03 ports Thank you April 18, 2025 at 9:43 AM, 윤경환 : @ FA @Baek Hojong(백호종)FA 피엠님 양극분체 STKC11 포크발 나온 상태로 3.Hoist Driver Error. 입니다 조치 부탁 드립니다. April 18, 2025 at 9:44 AM, Baek Hojong(백호종)FA : 네 알겠습니다 조장님 April 18, 2025 at 9:46 AM, 윤경환 : 감사 합니다. April 18, 2025 at 9:48 AM, Farkas Tamàs : we are going April 18, 2025 at 9:50 AM, 윤경환 : Thank you. April 18, 2025 at 9:51 AM, Shakir (MCS) : Let me know I will release more pallets. Currently STKC11 OOS and already initiated job of UNKDUP from STKC11 Thank you sir April 18, 2025 at 9:53 AM, Yoon : okay we need a more time April 18, 2025 at 11:44 AM, Yoon : This message was deleted. April 18, 2025 at 11:44 AM, 윤경환 : @ MCS/RTD Please pallets in the Cathode warehouse to GF port. UNKDUP-PS111-25011xxxx Another 30 pallet. April 18, 2025 at 11:44 AM, Shakir (MCS) : Working on it April 18, 2025 at 12:20 PM, Shakir (MCS) : Hello sir Requested 30 pallets has been released to M01~M03 ports. STKC11: 00 UNKDUP STKC12: Job initiated for all UNKDUP STKC13: 17 left UNKDUP Thank you April 18, 2025 at 12:52 PM, 윤경환 : Thank you.👍 April 18, 2025 at 2:56 PM, 윤경환 : @ MCS/RTD Please pallets in the Cathode warehouse to GF port. UNKDUP-PS111-25011xxxx Last 17 pallet. April 18, 2025 at 2:56 PM, Shakir (MCS) : Working on it sir Thank you April 18, 2025 at 2:57 PM, Yoon : thanks for your supporting April 18, 2025 at 2:57 PM, 윤경환 : Thank you. April 18, 2025 at 2:57 PM, Shakir (MCS) : You’re welcome sir April 18, 2025 at 3:24 PM, Shakir (MCS) : Requested 17 pallets has been released to M01~M03 ports. STKC11: 00 UNKDUP STKC12: 01 UNKDUP STKC13: 17 job Initiated for UNKDUP 1 UNKDUP pallet job not executed still in warehouse STKC12. Should I create Job for this pallet there is no current job for this pallet? Thank you April 18, 2025 at 3:58 PM, 윤경환 : Thank you.👍 April 18, 2025 at 4:28 PM, Yoon : we needed to out put for one more plt for UNKDUP-2502110092 on STK12. April 18, 2025 at 4:28 PM, Yoon : that is last one April 18, 2025 at 4:29 PM, Shakir (MCS) : Working on it April 18, 2025 at 4:31 PM, Shakir (MCS) : Done ✅ All UNKDUP 77 pallets released. Thank you very much April 18, 2025 at 4:31 PM, Yoon : yap thanks. April 18, 2025 at 6:17 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (3):Csanálosi Gábor, Nagy Tibor, Céhman Zsolt, Sick (0):- Holiday (1):- Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András, Kiss Balázs, Céhman Zsolt Assembly(8): GF: Novák Zoltán, Kovács Szabolcs, Csanálosi Gábor, Zsurbej Zsolt 1F:Nagy Zsolt, Novák Károly, Kasztel Balázs, Nagy Tibor Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 18, 2025 at 9:12 PM, Varga Zoltán : Sziasztok poron katódon megállt az AGV 60 step timeout hibával. Nézzétek meg légyszi April 18, 2025 at 9:13 PM, Varga Zoltán : Köszönöm April 18, 2025 at 9:13 PM, Oláh András : Megyünk April 18, 2025 at 9:13 PM, Varga Zoltán : Elindult April 18, 2025 at 9:14 PM, Oláh András : Rendben köszi 👍 April 18, 2025 at 10:08 PM, Varga Zoltán : Sziasztok poron katód air showerben megállt az AGV nézzétek meg légyszi. Köszönöm April 18, 2025 at 10:11 PM, Oláh András : Megyünk April 18, 2025 at 10:12 PM, Varga Zoltán : Már benn viszi az anyagot April 18, 2025 at 10:12 PM, Oláh András : Távgyógyítás 🙏 April 19, 2025 at 12:05 AM April 19, 2025 at 12:05 AM, Varga Zoltán : Ismét ugyanúgy. Megnéznétek légyszives? April 19, 2025 at 12:07 AM, Szabadi Miki : Igen megyünk April 19, 2025 at 1:34 AM, Varga Zoltán : AGV anyag levétel közben megállt por katód oldalon. Nézzétek meg légyszi April 19, 2025 at 1:34 AM, Oláh András : Megyünk April 19, 2025 at 4:27 AM, Varga Zoltán : Sziasztok poron katód air showerben megállt az AGV nézzétek meg légyszi. Köszönöm April 19, 2025 at 4:27 AM, Oláh András : Megyünk, ha nem akar újra indulni 😁 April 19, 2025 at 4:35 AM, Varga Zoltán : Meg se mozdul April 19, 2025 at 6:36 AM, Zagyva Tamás : Jó reggelt Poron katód oldalon megállt az AGV a raktárnál.Nem tudta felvenni a raklapot April 19, 2025 at 6:36 AM, Farkas Tamàs : Megyünk April 19, 2025 at 12:22 PM, Powder tréner : Hali a poron a Katod oldalon az egyik AVG az Air Shower-ben megált April 19, 2025 at 12:23 PM, Marsi Gábor : Megyek April 19, 2025 at 3:55 PM, Zagyva Tamás : Üdv Poron katód 1-re hiába kérjük az anyagot a raktár nem adja ki,és így a robot se tudja behozni.Megnézitek? April 19, 2025 at 3:57 PM, Zagyva Tamás : Ne gyertek.Megoldottam April 19, 2025 at 3:57 PM, Farkas Tamàs : Ok April 19, 2025 at 3:57 PM, Farkas Tamàs : Köszi April 19, 2025 at 4:06 PM, Zagyva Tamás : Na most meg az a helyzet,hogy nem akar ráállni a raklaplevételre.Kinyomom a hibát de újra visszaáll hibára. April 19, 2025 at 4:07 PM, Farkas Tamàs : Nézem April 19, 2025 at 4:09 PM, Farkas Tamàs : Megyünk April 19, 2025 at 4:09 PM, Zagyva Tamás : Ok April 19, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(5): Novák Zoltán, Kovács Szabolcs, Zsurbej Zsolt, Nagy Zsolt, , Kasztel Balázs, Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 19, 2025 at 7:53 PM, Varga Tamás Powder : Sziasztok a poron katod oldalt a 2es soron a 2es porton anyagot nem tudunk hívni de nem is világít a gomb se. Megtudnátok nézni? Köszönöm April 19, 2025 at 7:54 PM, Oláh András : E1PLC021_P02 nálunk üresen áll és nincs rajta LR April 19, 2025 at 7:57 PM, Varga Tamás Powder : Lehet a prizmával vagy a lézerrel lessz a gond April 19, 2025 at 7:57 PM, Oláh András : Megyünk megnézzük April 19, 2025 at 9:07 PM, Oláh András : Kész 👍 kábel sérulés miatt kellett cserélni. Az 5ös sor 2es portjáról cseréltük. April 20, 2025 at 2:10 AM April 20, 2025 at 2:10 AM, Varga Tamás Powder : Sziasztok. A poron katod oldal raktárban nem veszi le az anyagot. Meg tudnátok nézni? Köszönöm. April 20, 2025 at 2:10 AM, Szabadi Miki : Megyünk April 20, 2025 at 2:10 AM, Kiss Balázs F.A. : Érkezünk majd April 20, 2025 at 2:25 AM, Szabadi Miki : Már úton is van be az agv April 20, 2025 at 3:07 AM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a raktárban megint nem veszi le az anyagot. A 3as AGV meg a 2es soron rosszúl tette le a palettát(szét tört) megnézitek? Köszönöm April 20, 2025 at 3:07 AM, Oláh András : Mefyünk April 20, 2025 at 4:57 AM, Varga Tamás Powder : Sziasztok. A poron anod oldalt nem veszi le az AGV az anyagot. Megtudnátok nézni? Köszönöm April 20, 2025 at 5:05 AM, Dániel Hufnágel : Megyünk April 20, 2025 at 5:06 AM, Oláh András : Mi is 😅 April 20, 2025 at 7:50 AM, Zagyva Tamás : Poron katód oldalon megállt a robot az airshowerben.Nem tudunk tölteni.Meg kellene nézni.Köszönöm April 20, 2025 at 7:52 AM, Farkas Tamàs : Megyünk April 20, 2025 at 1:42 PM, Zagyva Tamás : Poron katód oldalon ismét megállt a robot az airshowerben.Nem tudunk tölteni.Meg kellene nézni.Köszönöm April 20, 2025 at 1:43 PM, Marsi Gábor : Megyek April 20, 2025 at 1:52 PM, Marsi Gábor : Kész April 20, 2025 at 2:14 PM, Zagyva Tamás : Kösz April 20, 2025 at 4:45 PM, Zagyva Tamás : Poron anód oldalon félig a raktárba,félig bedig az airshowerbe megállt a robot. April 20, 2025 at 4:46 PM, Marsi Gábor : Mindjárt vissza megyek April 20, 2025 at 4:46 PM, Zagyva Tamás : Oks April 20, 2025 at 6:15 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13+3 Overtime (3):Boromisza Zoltán, Csanálosi Gábor, Szűcs Géza Sick (0):- Holiday (0): Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(7): GF: Novák Károly, Kasztel Balázs, Kovács Szabolcs, Csanálosi gábor 1F: Novák Zoltán, Zsurbej Zsolt, Nagy Zsolt Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Boromisza Zoltán April 21, 2025 at 12:57 AM April 21, 2025 at 12:57 AM, VK (mcs) : @FA Please check Cathode powder STK C11 Hoist driver error! April 21, 2025 at 1:02 AM, Szücs Géza FT-B : solved April 21, 2025 at 2:29 AM, Varga Zoltán : Sziasztok poron katód oldalon AGV nem veszi ki az anyagot a raktárból. Raktárnál heartbit alarm jelez. Nézzétek meg légyszi April 21, 2025 at 2:30 AM, Szücs Géza FT-B : úton April 21, 2025 at 2:43 AM, Szücs Géza FT-B : kész April 21, 2025 at 3:18 PM, Zagyva Tamás : Sziasztok Poron megálltak a robotok a raktárnál.Mindkettőn rajta van az anyag,de nem viszik be a területre April 21, 2025 at 3:19 PM, Marsi Gábor : Megyek April 21, 2025 at 6:08 PM, Szabó Zoltán János : Sziasztok, Valto muszaktol azt az informaciot kaptam, hogy poron ismet kaotikus allapotban uzemelnek az agv-k. (Pl az air showert nem tudja kinyitni magatol stb.) Mivel anod es katod oldalon is folyamatos a toltes igy ha van ra mod es lehetoseg egy allando jelenletu, keszenletben levo kollegat szeretnek kerni porra. Koszonom. April 21, 2025 at 6:10 PM, Szücs Géza FT-B : Szia, igen, CA oldalon nem tud befele menni April 21, 2025 at 6:32 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 8+5/12 Tech, 1Sl Overtime(5): Szabadi Miklós, Harasztia Zoltán, Gégény Dávid, Zsurbej Zsolt Holiday(2): Böröcz Tamás, Rácz Dániel Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Szabadi Miklós - Powder CA AGV(1): Kertész Kornél Dániel --------------- Assy GF (3): Csanálosi Gábor, Gégény Dávid, Zsurbej Zsolt --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Form April 21, 2025 at 6:54 PM, KIM SEYEON [김세연]_FA : Dear powder shift leader is there production at CA powder tonight? April 21, 2025 at 6:55 PM, Szücs Géza FT-B : Good Evening! Working on both side. Technicians moveing to AGV inside with manual mode April 21, 2025 at 6:56 PM, Szabó Zoltán János : Hello, Ebben az üzenetben írtam, hogy mindkettő oldalon megy a betöltés!! April 21, 2025 at 6:57 PM, Szabó Zoltán János : Utilitynek szoltam az airshower ujrainditas megkiserlesevel kapcsolatosan. Hamarosan erkeznek. April 21, 2025 at 8:26 PM, Varga Tamás Powder : Sziasztok. Anod 1es sor 2es portra hivtunk anyagot 20 perce de nem jön ,a fehér lámpa meg villog. Megnéznétek? Köszönöm April 21, 2025 at 8:35 PM, Kertész Dániel : Kész April 22, 2025 at 6:10 PM April 22, 2025 at 6:10 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 9+3/12 Tech, 1Sl Overtime(3): Hufnágel Dániel, Kasztel Balázs, Novák Zoltán Holiday(1): Czeilinger Krisztián Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós, Novák Zoltán --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Kasztel Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikuso April 22, 2025 at 6:46 PM, Szabó Zoltán János : Sziasztok, Szeretnek segitseget kerni katod 2 porra. Lerakta a raklapot sikeresen ((picit elmozdult allapotban), de valamiert nem tudunk anyagot be kerni arra a portra. Meg nezitek, legyszives? Koszonom. April 22, 2025 at 6:48 PM, Rácz Dániel / FA : Szia, indulok. April 22, 2025 at 6:59 PM, Rácz Dániel / FA : Itt vagyok April 22, 2025 at 7:02 PM, Szabó Zoltán János : En meg lejottem raktarba. April 22, 2025 at 9:15 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a 3as AGV az 1es sor 2es portra rosszúl tette le a raklapot. Megnéznétek? Köszönöm April 22, 2025 at 9:16 PM, Szücs Géza FT-B : le tudnád fényképezni légyszibes? April 22, 2025 at 9:17 PM, Rácz Dániel / FA : Indulok April 22, 2025 at 9:17 PM, Varga Tamás Powder : Igen April 22, 2025 at 9:18 PM, Varga Tamás Powder : Meg útközben sokszor megáll hibára és ujra indúl April 22, 2025 at 9:19 PM, Rácz Dániel / FA : Viszek valamit amivel megtudom tisztítani a azenzort April 22, 2025 at 9:43 PM, Szabó Zoltán János : 3. Szamu robot katodon picit megy elore majd ki all hibara. Szenzor hiba lesz sztem mert neha be villan az egyik sarok szenzor. April 22, 2025 at 9:44 PM, Rácz Dániel / FA : Szereztem tőrlökendőt már úton vagyok April 22, 2025 at 9:45 PM, Szabó Zoltán János : Ki is allt hibara most. April 22, 2025 at 9:48 PM, Rácz Dániel / FA : Jövök April 22, 2025 at 10:14 PM, Rácz Dániel / FA : An-Ca oldal kész indulnak az AGV-k, köszönöm a türelmet. April 22, 2025 at 10:15 PM, Szabó Zoltán János : Koszi a segitseget April 22, 2025 at 10:16 PM, Rácz Dániel / FA : Szerintem maradok amíg feltankoltok újra. April 22, 2025 at 10:17 PM, Szabó Zoltán János : Egy ur vagy, koszonom. April 22, 2025 at 10:35 PM, Varga Tamás Powder : @Szücs Géza FT-B ismét szét törte a raklapot de most a 2es soron. Fénykép készült, Dani viszi a fényképezőt 😊 April 22, 2025 at 10:35 PM, Rácz Dániel / FA : Úton April 23, 2025 at 3:30 AM April 23, 2025 at 3:30 AM, Szabó Zoltán János : Anod oldalon a termelesben megallt az egyik robot hibara. Meg nezitek, pliz? Koszonom April 23, 2025 at 3:32 AM, Rácz Dániel / FA : Nem sokára érkezem April 23, 2025 at 3:44 AM, Rácz Dániel / FA : @Varga Tamás Powder amíg oda érek megpróbálsz egy: manual, reset, autostartot hátha ?! Köszi 🤞 April 23, 2025 at 3:46 AM, Varga Tamás Powder : Elöbb próbáltam. Sikertelen 😞 April 23, 2025 at 3:46 AM, Rácz Dániel / FA : Rendben, azért köszönöm, már úton vagyok. April 23, 2025 at 4:15 AM, Rácz Dániel / FA : Sikerült kihoznom. Már megy befele a teli paletta. April 23, 2025 at 4:54 AM, Rácz Dániel / FA : Most kérted anyagot anód 1es sor 1 portra. Szerintem megvárom inkább 😅 April 23, 2025 at 4:54 AM, Rácz Dániel / FA : *k April 23, 2025 at 7:00 AM, Powder tréner : Jó napot A por Katod oldalon a 3 mas AVG kiált hibára nézétek meg köszi April 23, 2025 at 7:20 AM, Zagyva Tamás : Katód oldalon még mindig áll a robot a raktárba.Megnézitek? April 23, 2025 at 7:21 AM, Zagyva Tamás : Ja már itt vagytok bocs April 23, 2025 at 7:40 AM, Powder tréner : Good afternoon, I would like to know if the Katod raw material warehouse has any raw material released for production ? April 23, 2025 at 7:41 AM, Mohammad Amir : Good Morning, Could you please tell me for which machine or which type of cathode materials (Definition id)you would like to know ? Thank you very much! April 23, 2025 at 7:43 AM, Powder tréner : Yes Moment 111-00150A (CDS172-14BW) (Katod Materials) April 23, 2025 at 7:44 AM, Mohammad Amir : Unfortunately for this type ,we don't have any transferable materials. Thank you very much! April 23, 2025 at 7:46 AM, Powder tréner : Thank you April 23, 2025 at 7:47 AM, Mohammad Amir : For you information, We are receiving LR from all these machines assigned for materials(111-00150A):-I referring to E1PLC011_P02/P01 and E1PLC021_P01/P02 . But as now Materials not available so jobs are not getting created. Thank you! April 23, 2025 at 7:47 AM, Mohammad Amir : You are welcome! April 23, 2025 at 10:11 AM, 윤경환 : @MCS/RTD 포일 자동화 창고 포트 5019 케리어에 있는 포일 투입이 안되고 있습니다. 확인 부탁 드립니다. April 23, 2025 at 10:11 AM, Mohammad Amir : Checking Sir! April 23, 2025 at 10:15 AM, Mohammad Amir : Job has been created successfully Sir ✅. Everything is good from MCS /RTD side. It is not moving now because of SCS error. We are receiving this SCS error" 5019 is not a pick-up location". @FA @Skwarek Tibor Please check E0STK001_M02(5019) port. Thank you very much! April 23, 2025 at 10:16 AM, Farkas Tamàs : Okay, let's go check. April 23, 2025 at 10:22 AM, 윤경환 : Thank you.👍 April 23, 2025 at 10:23 AM, Mohammad Amir : You are welcome Sir! April 23, 2025 at 10:38 AM, Farkas Tamàs : Done. The material has been stored. April 23, 2025 at 10:38 AM, Mohammad Amir : Thank you very much! April 23, 2025 at 10:39 AM, Mohammad Amir : Sir, Issue has been resolved by SCS team and now Material has been successfully stored in E0STK001(0200104). ✅ Thank you very much! April 23, 2025 at 10:41 AM, 윤경환 : Thank you for your support. April 23, 2025 at 10:41 AM, Mohammad Amir : You are welcome Sir! April 23, 2025 at 10:45 AM, Zagyva Tamás : Sziasztok Poron anod oldalon lecsukódott az egyik tűzgátló függöny.Meg tudnátok nézni? April 23, 2025 at 10:45 AM, Marsi Gábor : Hamarosan megyünk April 23, 2025 at 10:47 AM, Zagyva Tamás : Oks April 23, 2025 at 11:20 AM, Farkas Tamàs : Kész April 23, 2025 at 2:08 PM, Powder tréner : Idéglenesen a Katodon mauálban vannak az AVG-K mert alapanyag van a területen amit el kel szálitani manuálisan April 23, 2025 at 2:15 PM, Farkas Tamàs : Oké, köszi az infót April 23, 2025 at 2:39 PM, Powder tréner : Amit lehet visza kapcsolom April 23, 2025 at 2:40 PM, Mohammad Amir : @Farkas Tamàs Please check E0STK002_C01 there is travel driver error. Thank you! April 23, 2025 at 2:47 PM, Powder tréner : A por katod oldali AVG-k automatára visza kapcsolva April 23, 2025 at 3:25 PM, Zagyva Tamás : Katódon össze akadt a raktár előtt a 2 robot April 23, 2025 at 3:28 PM, Skwarek Tibor : Megyek April 23, 2025 at 4:09 PM, Marsi Gábor : Kész April 23, 2025 at 4:10 PM, Zagyva Tamás : Köszönöm April 23, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Novák Károly, Kasztel Balázs, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 23, 2025 at 7:35 PM, Varga Zoltán : Sziasztok E1PLC061-P01 portnál kéken villog a lámpa LR megnyomása után. Alapanyag nem jön. Meg tudnátok nézni légyszi? April 23, 2025 at 7:38 PM, Dániel Hufnágel : Szia, jelen pillanatban nincs elérhető anyag, azért villog kéken April 23, 2025 at 7:49 PM, 윤경환 : @ MCS/RTD Good evening. Please check the transferable 111-00150A. April 23, 2025 at 7:52 PM, VK (mcs) : There is no available material April 23, 2025 at 8:08 PM, 윤경환 : Thank you.👍 April 23, 2025 at 9:51 PM, Varga Zoltán : Hello por anódon megállt AGV nézzétek meg légyszi April 23, 2025 at 9:53 PM, Kiss Balázs F.A. : Majd érkezünk April 24, 2025 at 2:47 AM April 24, 2025 at 2:47 AM, Varga Zoltán : Sziasztok katód oldalon a raktár előtt egymást akadályozza 2 AGV nézzétek meg légyszi April 24, 2025 at 2:47 AM, Szabadi Miki : Rendben megyünk April 24, 2025 at 6:10 AM, Zagyva Tamás : Jó reggelt Poron katód raktárba ösdzeakadt két robot.Majd meg kellene nézni őket.Köszi April 24, 2025 at 6:11 AM, Farkas Tamàs : Megyünk April 24, 2025 at 7:02 AM, Powder tréner : Jó reggelt Poron Anodon raktárban nem akarja leveni az alapanyagot az AVG robot.Majd meg kellene nézni őket.Köszi April 24, 2025 at 7:03 AM, Farkas Tamàs : Megyünk April 24, 2025 at 7:08 AM, Marsi Gábor : Kész April 24, 2025 at 7:55 AM, Powder tréner : Hal az Anod Por Air Sowerben megált az egyik AVG meg nézitek April 24, 2025 at 8:00 AM, Farkas Tamàs : Megyünk April 24, 2025 at 8:13 AM, Marsi Gábor : Kész April 24, 2025 at 9:00 AM, 동현 : @장영환(Younghwan Chang) @서한결 Seo Han 장영환PM님 유선과 같이 분체 스테이션 개조건 관련 금주까지는 양극 잔여라인 작업진행, 차주는 화(4/29), 수(4/30)에 필터 교체 일정 맞쳐서 음극 잔여 라인 진행하도록하겠습니다. April 24, 2025 at 9:01 AM, Powder tréner : Hali valaki tudna jönni a katod Por oldalon az AVG ket idéglenesen lekéne kapcsolni mert érkezik alapanyag ami qaliti mitázásra vár és kel a hely a raktári részen April 24, 2025 at 9:19 AM, Powder tréner : Elnézést a por katod AVG ket nem kel leálitani April 24, 2025 at 9:20 AM, Marsi Gábor : OK akkor nem megyek April 24, 2025 at 1:15 PM, 윤경환 : This message was deleted. April 24, 2025 at 1:15 PM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Cathode warehouse to GF port. UNKDUP-PS111-250123xxx 4 pallet. April 24, 2025 at 1:25 PM, duzzaman Md (MCS) : Jobs been created successfully April 24, 2025 at 1:31 PM, 윤경환 : Thank you. April 24, 2025 at 2:11 PM, 주범진 : @윤성 안녕하세요 1F음극 7호기 파우더 크레인 안 움직이는데 대응 해주실 분 계신가요? April 24, 2025 at 2:13 PM, KIM SEYEON [김세연]_FA : 윤성은 요 카톡방에 없습니다. April 24, 2025 at 2:15 PM, 주범진 : 확인 감사드립니다 April 24, 2025 at 6:18 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Novák Zoltán, Nagy Zsolt, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 25, 2025 at 8:20 AM April 25, 2025 at 8:20 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 25, 2025 at 3:02 PM, 김민수 left this chatroom. April 25, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+2/12+1 Tech, 1Sl Overtime(2): Novák Zoltán, Zsurbej Zsolt Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Zsurbej Zsolt --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Novák Zoltán --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása vált April 26, 2025 at 6:12 PM April 26, 2025 at 6:12 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 26, 2025 at 8:06 PM, Varga Tamás Powder : Sziasztok a poron anod 7es soron hivnám az anyagot de nemvilágit a fehér gomb ahogy szokott. És nem hozza az anyagot. Megnéznétek? Köszönöm April 26, 2025 at 8:07 PM, Rácz Dániel / FA : Szia nem sokára ott vagyok. April 26, 2025 at 8:08 PM, Rácz Dániel / FA : Ha tényleg a fehér gombra gondolsz és nem a lámpára, az az Unload reguest, hogy vigye el az anyagot. April 26, 2025 at 8:19 PM, Rácz Dániel / FA : Itt vagyok April 26, 2025 at 8:27 PM, Varga Tamás Powder : Megyek April 26, 2025 at 8:28 PM, Rácz Dániel / FA : Bent vagyok April 26, 2025 at 8:30 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Please check this port: E1PLA071_P01 why not come the pallettes. Thank you. April 26, 2025 at 8:36 PM, Shahbaz 샤바즈 MCS/RTD : There is already a job, please can you check the carrier at E0CNVA12_P01. It’s not moving from there. Thanks April 26, 2025 at 8:37 PM, Rácz Dániel / FA : Ok, I checking. April 26, 2025 at 8:44 PM, Rácz Dániel / FA : The RTV not working. April 26, 2025 at 8:48 PM, Rácz Dániel / FA : E0STKA12 now working. April 26, 2025 at 8:49 PM, Szücs Géza FT-B : kell help? April 26, 2025 at 8:49 PM, Rácz Dániel / FA : Nem tudom April 26, 2025 at 8:50 PM, Rácz Dániel / FA : E0CNVA12_P01 not working. Just waiting. The RTV also waiting. April 26, 2025 at 8:51 PM, Rácz Dániel / FA : I try manual moving the pallets. April 26, 2025 at 8:55 PM, Rácz Dániel / FA : @Shahbaz 샤바즈 MCS/RTD Thank you for the support. Problem solved. April 27, 2025 at 6:10 AM April 27, 2025 at 6:10 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— April 27, 2025 at 6:16 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+1/12 Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Fabriczius Gergely, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő April 27, 2025 at 6:45 PM, Rácz Dániel / FA : Sziasztok, CA oldalon a #2 es AGV hibában áll az ACS szerint. Tudtok róla valamit ? Köszi April 27, 2025 at 6:50 PM, Szücs Géza FT-B : megnézem April 27, 2025 at 6:54 PM, Szücs Géza FT-B : manuálban van April 27, 2025 at 6:54 PM, Rácz Dániel / FA : Köszi April 27, 2025 at 6:55 PM, Szücs Géza FT-B : átraktam autoba, a 3as 90-ra töltés ordert töröltem, és újra létrehoztam 98%al April 27, 2025 at 6:58 PM, Rácz Dániel / FA : Köszi April 27, 2025 at 7:00 PM, Szücs Géza FT-B : szloved? April 27, 2025 at 7:02 PM, Rácz Dániel / FA : Jah April 28, 2025 at 3:04 AM April 28, 2025 at 3:04 AM, Szabó Zoltán János : Sziasztok, Poron az anod 4.soron hiaba be kerunk anyagot nem erkezik semmi. Keken vilagit a visszajelzo. Megnezitek legyszives? Koszonom. April 28, 2025 at 3:08 AM, Rácz Dániel / FA : Szia, nem sokára ránézek. Azt tudjuk hogy van e elèrhető anyag ? April 28, 2025 at 3:09 AM, Rácz Dániel / FA : Az LR látom April 28, 2025 at 3:11 AM, Varga Tamás Powder : Nem tudjuk mennyi van még a raktárban April 28, 2025 at 3:12 AM, Rácz Dániel / FA : @VK (mcs) please check this port why not coming the palettes. E1PLA041_P01-P02. Thank you April 28, 2025 at 3:13 AM, VK (mcs) : Checking April 28, 2025 at 3:13 AM, Rácz Dániel / FA : Az 1 es AGV most veszi le a palettát a portról April 28, 2025 at 3:14 AM, Rácz Dániel / FA : Now good, no problem, thx. AGV on the road ! April 28, 2025 at 3:14 AM, Rácz Dániel / FA : P01-re viszi April 28, 2025 at 3:15 AM, Csanálosi Gábor FA : The highway to hell! :D April 28, 2025 at 3:17 AM, Rácz Dániel / FA : P02 ön reseteljetek egyet, utána nyomjátok be újra a Load Requestet, köszi. April 28, 2025 at 3:18 AM, Varga Tamás Powder : Rendben. Mindjárt megnézem April 28, 2025 at 3:21 AM, VK (mcs) : For port 2 E1PLA041 There is no available material April 28, 2025 at 3:21 AM, Rácz Dániel / FA : Thank you Mr @VK (mcs) April 28, 2025 at 3:30 AM, Varga Tamás Powder : @Rácz Dániel / FA Kéken villog, épp akartam írni hogy biztos nincs anyag. April 28, 2025 at 3:31 AM, Rácz Dániel / FA : Oksa, köszi. April 28, 2025 at 3:31 AM, Szücs Géza FT-B : nyomj sárga gombot 5mpig April 28, 2025 at 3:31 AM, Rácz Dániel / FA : De nincs elérhető anyag April 28, 2025 at 3:32 AM, Szücs Géza FT-B : akkor jó :) April 28, 2025 at 3:59 AM, Szabó Zoltán János : Katod poron a raktarnal 2 robot dodgemezni szeretne. Toltorol akart az egyik lejonni a masik meg utba van neki. Ra kukkantotok, legyszi? Koszonom April 28, 2025 at 3:59 AM, Szücs Géza FT-B : 10 peerec és ott leszek April 28, 2025 at 4:04 AM, Rácz Dániel / FA : Köszi April 28, 2025 at 4:20 AM, Szücs Géza FT-B : kész April 28, 2025 at 6:04 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 28, 2025 at 7:05 AM, Varga Zoltán : Jó reggelt LR gombot nyomva kéken villog E1PLA031_P01 és P02 .Megnéznétek légyszi mi lehet a gond? Köszönöm April 28, 2025 at 7:06 AM, Dániel Hufnágel : Jó reggelt April 28, 2025 at 7:07 AM, Dániel Hufnágel : Nincsen elérhető anyag a rendszer szerint April 28, 2025 at 7:08 AM, Mohammad Amir : Good morning, For P01 Material PS112-2501140192 on the way. For P02 there is no material available currently as soon as materials will be available jobs will be created. Thank you very much! April 28, 2025 at 9:38 PM, Powder tréner : Sziasztok,poron E1PLA043_ P01 portra nem jön a megrendelt anyag.Rá tudtok nézni hogy miért?Köszönöm. April 28, 2025 at 9:41 PM, VK (mcs) : There is no available material April 29, 2025 at 6:05 AM April 29, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+3 Overtime (3):Édl Tamás, Böröcz Tamás, Céhman Zsolt Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Oláh András, Céhman Zsolt Assembly(6): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs,Böröcz Tamás Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Édl Tamás April 29, 2025 at 12:14 PM, Varga Zoltán : Sziasztok poron katód #2-nél megállt az AGV nézzétek meg légyszi köszönöm April 29, 2025 at 12:22 PM, Szabadi Miki : Megyünk April 29, 2025 at 12:27 PM, Szabadi Miki : @duzzaman Md (MCS) please check there is an order from E0CNVC12_P07 to E1PLC021_P02 but no AGV is assigned April 29, 2025 at 12:27 PM, Sazzad Bhai SKon : We'll check April 29, 2025 at 12:28 PM, Szabadi Miki : Thank you April 29, 2025 at 12:38 PM, Szabadi Miki : Okay it is working now AGV#2 carries the material April 29, 2025 at 1:27 PM, Varga Zoltán : E1PLC021-P02 nem működik meg tudnátok nézni légyszi egyik gomb sem világít, a zöld lámpa világít csak köszönöm April 29, 2025 at 1:30 PM, duzzaman Md (MCS) : @FA Kindly check E0STKA12_C01 PORT INTERFACE ERROR THANKS ! April 29, 2025 at 1:30 PM, Dániel Hufnágel : We are here(thumbsup) April 29, 2025 at 1:30 PM, Dániel Hufnágel : We stopped it! April 29, 2025 at 1:31 PM, duzzaman Md (MCS) : I appreciate your information. April 29, 2025 at 1:33 PM, Szabadi Miki : Nemsoká megyünk April 29, 2025 at 3:04 PM, Varga Zoltán : Sziasztok poron katód oldalon AGV megállt gyertek légyszi köszönöm April 29, 2025 at 3:11 PM, Oláh András : Megyünk April 29, 2025 at 3:12 PM, Varga Zoltán : Bent van az Air shower előtt April 29, 2025 at 4:02 PM, Szabadi Miki invited Kőszegi Bence Csaba. April 29, 2025 at 5:08 PM, Varga Zoltán : Ismét AGV probléma poron, air shower előtt állt meg kifelé. April 29, 2025 at 5:14 PM, Varga Zoltán : A másik pedig bent a kanyart nem veszi be. Rá tudnátok nézni? Köszönöm April 29, 2025 at 8:19 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt az 1es és 2es soron kéken villog a lámpa, a raktárban meg az AGV-n ott az anyag meg a másikat is kiadta a raktár. Megnéznétek? Köszönöm April 29, 2025 at 8:20 PM, Farkas Tamàs : Van anyag felszabadítva? April 29, 2025 at 8:21 PM, Farkas Tamàs : A 2-es AGV pedig várja a 3-ast hogy kijöjjön April 29, 2025 at 8:24 PM, Varga Tamás Powder : 2es soron a 2es port az 1esen meg az 1es port világit kéken. Most hozza be az egyik AGV az anyagot. April 29, 2025 at 8:28 PM, Zagyva Tamás : Működnek👍 April 29, 2025 at 8:30 PM, Farkas Tamàs : Szuper April 30, 2025 at 7:12 AM April 30, 2025 at 7:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— April 30, 2025 at 11:27 AM, Powder tréner : Poron E1PLC931_P01 ,E1PLC031_P02 portra nem adja ki az automata raktár az anyagot. April 30, 2025 at 6:06 PM, Varga Tamás Powder : Sziasztok, a poron anod raktárban az AGV kiállt hibára. A villát nem engedi le. Megtudnátok nézni? Köszönöm April 30, 2025 at 6:08 PM, Pálosi Róbert : Megyünk April 30, 2025 at 6:12 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 6:14 PM, Rácz Dániel / FA : This message was deleted. April 30, 2025 at 7:24 PM, Szabó Zoltán János : Sziasztok, Poron, Anod raktarnal a 3. Szamu robot toltore allt ra viszont a villa felemelve maradt es ki allt hibara. Megnezitek, legyszives? April 30, 2025 at 7:27 PM, Szücs Géza FT-B : kész April 30, 2025 at 11:01 PM, Szabó Zoltán János : Anod 4-re hiaba kerunk anyagot nem erkezik a robot az anyggal. Raktar konvejoron van 2 paletta is. April 30, 2025 at 11:01 PM, Szabó Zoltán János : Meg nezitek, legyszives? April 30, 2025 at 11:02 PM, Pálosi Róbert : Megyünk April 30, 2025 at 11:16 PM, Varga Tamás Powder : Jelen pillanatban van 1 AGV bent amin van anyag, de addig nem teszi le ameddig nem töltik be a palettát. April 30, 2025 at 11:22 PM, Czeilinger Krisztián : Szia,az AGV-re nincs parancs. April 30, 2025 at 11:27 PM, Varga Tamás Powder : Sziasztok a poron az AGV nem viszi be az anyagot.megtudnátok nézni? Köszönöm April 30, 2025 at 11:31 PM, Varga Tamás Powder : Anod oldalt April 30, 2025 at 11:44 PM, Czeilinger Krisztián : Megyek megnézem. May 1, 2025 at 12:17 AM May 1, 2025 at 12:17 AM, Varga Tamás Powder : @Mohammad Amir hello on the powder anode side the AGV does not bring the material to rows 4 and 3. can you help? May 1, 2025 at 12:18 AM, VK (mcs) : Checking May 1, 2025 at 12:21 AM, VK (mcs) : Carrier on the CNV output port was cancelled by OP , Now it should be transfer. May 1, 2025 at 1:00 AM, Varga Tamás Powder : @VK (mcs) AGV 3 has its fork up and therefore does not take the material to row 4. If the colleague puts it in manual mode, it takes the fork down, but if he switches it back to automatic mode, it returns to automatic mode and raises the fork. Can you help? May 1, 2025 at 1:05 AM, VK (mcs) : @FA Please check May 1, 2025 at 2:05 AM, Varga Tamás Powder : Sziasztok a poron anod oldalt a raktárban nem veszi le az anyagot. Megtudnátok nézni? Köszönöm May 1, 2025 at 2:07 AM, Szücs Géza FT-B : úton May 1, 2025 at 2:36 AM, Varga Tamás Powder : Sziasztok. A poron katod 3as sornál megállt az AGV megtudnátok nézni? Köszönöm May 1, 2025 at 2:54 AM, Szücs Géza FT-B : srácok úton May 1, 2025 at 3:20 AM, Pálosi Róbert : Kész May 1, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— May 1, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 1, 2025 at 7:44 PM, Varga Tamás Powder : Sziasztok. Poron anod air showerben megállt az AGV. Megtudnátok nézni? Köszönöm May 1, 2025 at 7:47 PM, Szücs Géza FT-B : úton May 1, 2025 at 7:58 PM, Varga Tamás Powder : Katod oldal 3as sornál meg a lépcsőnek ment az AGV anyagostúl😅 May 1, 2025 at 8:06 PM, Rácz Dániel / FA : Itt vagyunk 2 napi járó földre, May 1, 2025 at 8:07 PM, Szücs Géza FT-B : fotomásina nálad? May 1, 2025 at 8:10 PM, Szücs Géza FT-B : ez már szalad May 1, 2025 at 8:17 PM, Varga Tamás Powder : Officeba van May 1, 2025 at 8:20 PM, Szücs Géza FT-B : ottan nem láttam, már mind1 XD May 1, 2025 at 8:20 PM, Szücs Géza FT-B : Dani megcsinálta May 2, 2025 at 12:57 AM May 2, 2025 at 12:57 AM, Varga Tamás Powder : Ismét gond adódott az AGVvel. Nem veszi le az anod raktárban az anyagot. Megtudnátok nézni? Köszönöm May 2, 2025 at 12:58 AM, VK (mcs) : Checking May 2, 2025 at 1:01 AM, VK (mcs) : It should be transferred now May 2, 2025 at 1:03 AM, Szabó Zoltán János : Megoldottam. Mar viszi az anyagot. May 2, 2025 at 1:03 AM, Rácz Dániel / FA : Köszi 🙏 May 2, 2025 at 1:04 AM, Szabó Zoltán János : Vissza kuldtem egy ponttal visszabb es ujra ra kuldtem es igy nem allt ki hibara. May 2, 2025 at 1:10 AM, Rácz Dániel / FA : Király vagy köszi. May 2, 2025 at 1:13 AM, Szabó Zoltán János : Most anodon a konvejor allt meg igy egy robot is ki allt hibara. May 2, 2025 at 1:14 AM, Szabó Zoltán János : Villa elott erzekel valamit most nezem. May 2, 2025 at 1:14 AM, Szabó Zoltán János : De semmi sincs elotte. Robot is es a raktar is visit. Megnezitek legyszives? May 2, 2025 at 1:17 AM, Czeilinger Krisztián : Megyünk. May 2, 2025 at 2:02 AM, Czeilinger Krisztián : Kész May 2, 2025 at 2:06 AM, Szabó Zoltán János : Raktar az ugyanugy dalolaszik. Az mitol? May 2, 2025 at 2:24 AM, Rácz Dániel / FA : Nem sokára érkezem May 2, 2025 at 2:28 AM, Varga Tamás Powder : Anodon Az AGV megint kiállt hibára a 3as sornál anyag nincs rajta (on route postion) a másik meg elötte van ami hozná az anyagot, raktárban pedig mind a 2 porton van anyag. Megtudnátok nézni? Köszönöm May 2, 2025 at 2:29 AM, Rácz Dániel / FA : Nem sokára érkezem May 2, 2025 at 2:52 AM, Rácz Dániel / FA : Itt vagyok AN oldalon May 2, 2025 at 3:24 AM, Rácz Dániel / FA : Kész May 2, 2025 at 3:24 AM, Rácz Dániel / FA : P08-as porton nem volt paletta azonosító May 2, 2025 at 3:32 AM, VK (mcs) : @FA Please check Anode powder conveyor port 7 Carrier doesn't transferred. May 2, 2025 at 3:50 AM, Varga Tamás Powder : Poron anod oldalt nem hozza az AGV anyagot. Megnéznétek? Köszönöm May 2, 2025 at 3:54 AM, Szücs Géza FT-B : @Csanálosi Gábor FA meegy May 2, 2025 at 3:54 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Menjetek légyszíves ti is May 2, 2025 at 3:55 AM, Czeilinger Krisztián : Rendben van. May 2, 2025 at 3:55 AM, Szücs Géza FT-B : jó ötlet May 2, 2025 at 3:56 AM, Szücs Géza FT-B : Dani, a másik AGV is kiállt ugyan ott, hibajelzés nincs ez még mindig ugyan az a raklap May 2, 2025 at 3:56 AM, Rácz Dániel / FA : Láttam igen 😔 May 2, 2025 at 4:19 AM, Rácz Dániel / FA : @Csanálosi Gábor FA szép munka, köszi. May 2, 2025 at 6:11 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2):Novák Károly, Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Kovács Szabolcs 1F: Kasztel Balázs, Novák Zoltán Modul(2): Magyar Balázs, Martina Dávid, May 2, 2025 at 6:20 AM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.02 Time:06:00-18:00 1. Lee jubong 이주봉PM 2. Ji seokbeom 지석범PM Köszönöm szépen May 2, 2025 at 6:24 AM, Varga Zoltán : Jó reggelt poron Anód területen AGV áll narancs lámpa világít, csak várakozik vagy probléma miatt áll? Megnéznétek légyszi? May 2, 2025 at 6:25 AM, Dániel Hufnágel : Jó reggelt! Már megy is! May 2, 2025 at 7:17 AM, Varga Zoltán : Ugyanott megállt de most zöld lámpa világít és piros villog üzenet nincs. Nézzétek meg légyszi May 2, 2025 at 7:17 AM, Dániel Hufnágel : Koreai kollegával hamarosan érkezünk fel! May 2, 2025 at 7:17 AM, Varga Zoltán : Köszönöm May 2, 2025 at 7:27 AM, Varga Zoltán : Katód #3-nál lépcsőnek nyomta a raklapot és ott maradt Még azt is nézzétek meg légyszi May 2, 2025 at 7:28 AM, Dániel Hufnágel : Igyekszünk fel, hamarosan ott! May 2, 2025 at 8:12 AM, Dániel Hufnágel : @duzzaman Md (MCS) Good morning! Please check powder 1F chatode side there is one material without command! May 2, 2025 at 8:12 AM, Dániel Hufnágel : Please check it May 2, 2025 at 8:18 AM, duzzaman Md (MCS) : Could you please help with a bit more detailed? Like the location or the carrier number. Thank you. May 2, 2025 at 8:20 AM, Dániel Hufnágel : Just a second May 2, 2025 at 8:22 AM, Dániel Hufnágel : E0CNVC12_P07 May 2, 2025 at 8:26 AM, Kim daejung invited 윤인혁 and 정창식. May 2, 2025 at 8:27 AM, duzzaman Md (MCS) : Thank you. We see the carrier PS111-2502250055 Which is alternated as E1PLC031_P01 state is out of service since 7.48 May 2, 2025 at 8:28 AM, duzzaman Md (MCS) : An active job exists. May 2, 2025 at 7:07 PM, Powder tréner : Por katod 3-ra nem hozza az alapanyagot meg nézitek léci May 2, 2025 at 7:07 PM, Farkas Tamàs : Nézem May 2, 2025 at 7:08 PM, Powder tréner : A kijelzön a zöld és a fér gomb vilog May 2, 2025 at 7:08 PM, Powder tréner : P02 port May 2, 2025 at 7:08 PM, Farkas Tamàs : Mert nincs lekérés May 2, 2025 at 9:11 PM, Powder tréner : Hali a por katod oldalon az Air sower-böl nem viszi az alapanyagot be a termelésbe meg nézitek May 2, 2025 at 9:13 PM, Farkas Tamàs : Nézzük May 2, 2025 at 9:16 PM, Marsi Gábor : Megyek May 2, 2025 at 11:43 PM, Zagyva Tamás : Poron katód raktárnál megállt a robot.Meg tudjátok nézni? May 2, 2025 at 11:44 PM, Marsi Gábor : Persze lenyelem az utolsó falatot May 2, 2025 at 11:46 PM, Zagyva Tamás : Gyere mert a koresz itt toporog May 2, 2025 at 11:47 PM, Marsi Gábor : Ok May 3, 2025 at 12:01 AM May 3, 2025 at 12:01 AM, Powder tréner : Can you tell me what material is in the katod raw material warehouse 111-00169A with this code May 3, 2025 at 12:38 AM, VK (mcs) : Sorry for late. Please tag @mcs to quick answers. Thx There are 90 carriers May 3, 2025 at 12:41 AM, Powder tréner : Okay May 3, 2025 at 6:06 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13+1 overtime Overtime (1): Csanálosi Gábor Sick (0):- Holiday (3):Novák Károly, Nagy Gábor , Novák Zoltán Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Csanálosi Gábor 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 3, 2025 at 6:37 AM, Janos R. MX SL : Currently, all powder hopper loaders are empty on cathode line #2. Due to events during the night shift, it is anticipated that a line stoppage will occur in the coating area within approximately 5–6 hours, once the remaining material is depleted at the mixing . To prevent this, we urgently require the manual extraction and provision of a 20-pallet buffer of Umicore material type 111-00169A for the powder loading area. This manual intervention is also necessary in order to proceed with the loa May 3, 2025 at 6:38 AM, Dániel Hufnágel : @Shahbaz 샤바즈 MCS/RTD Please release the materials! May 3, 2025 at 6:38 AM, Dániel Hufnágel : Good morning! May 3, 2025 at 6:39 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! working on it. May 3, 2025 at 6:39 AM, Janos R. MX SL : Thank you, and Good morning for all. May 3, 2025 at 6:43 AM, Shahbaz 샤바즈 MCS/RTD : For the confirmation , should we release to E0CNVC12_P07? There are already auto transfers. May 3, 2025 at 6:50 AM, Shahbaz 샤바즈 MCS/RTD : @Dániel Hufnágel this port right? May 3, 2025 at 6:51 AM, Szabadi Miki : Yes May 3, 2025 at 6:51 AM, Szabadi Miki : Uton vagyunk leszedni May 3, 2025 at 6:58 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested material. Thank you May 3, 2025 at 9:14 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AN powder stk A13 “Control power Cp trip” Thanks May 3, 2025 at 9:15 AM, Szabadi Miki : Checking May 3, 2025 at 9:18 AM, Varga Zoltán : Sziasztok AGV #3 megállt az Air showerben katód oldalon nézzétek meg légyszi May 3, 2025 at 9:18 AM, Szabadi Miki : Megyünk oda is May 3, 2025 at 10:27 AM, Varga Zoltán : Ugyanaz most is nézzétek meg légyszi May 3, 2025 at 10:28 AM, Dániel Hufnágel : Megyünk May 3, 2025 at 11:34 AM, Varga Zoltán : AGV #2 megállt a paletta előtt nem veszi ki az anyagot nézzétek meg légyszi May 3, 2025 at 11:34 AM, Szabadi Miki : Rendben majd megyünk May 3, 2025 at 11:36 AM, Varga Zoltán : Most elindult köszönöm ha mégis gond lesz szólok May 3, 2025 at 12:32 PM, Varga Zoltán : AGV hibánk van ismét a poron. Ukrán kolléga jelezte jelenleg nem tudok pontosabbat ha tudtok nézzétek meg légyszi May 3, 2025 at 12:33 PM, Dániel Hufnágel : Igen látom, amint végeztem ebéddel érkezem May 3, 2025 at 3:10 PM, Janos R. MX SL : According to the newly revised production plan, both Cathode #1 and Cathode #2 will continue production throughout tomorrow as well. If the AGVs are unable to perform their task and supply all three mixers, the raw material for the Cathode #2 line must be unloaded manually. I have aligned this with @장영환(Younghwan Chang) . I kindly ask for your cooperation. As discussed this morning, please also unload 25 pallets of Umicore 111-169A raw material for the 3rd line. Only start this if @FA team read May 3, 2025 at 3:13 PM, 장영환(Younghwan Chang) : 지금 양극 분체 AGV 2대만 가동 가능한 이유가 뭔가요? 생산에 필요한 capa.를 못맞춰서 투입이 계속 중지되는데요 @KIM SEYEON [김세연]_FA May 3, 2025 at 3:14 PM, 장영환(Younghwan Chang) : AGV 가동대수 제한한거 누구죠? May 3, 2025 at 3:19 PM, 장영환(Younghwan Chang) : @Janos R. MX SL Could you make a brief report about our downtime because of AGV? 1. Total available number of AGV now 2. And downtime because of FA So that i can report to CEO next week May 3, 2025 at 3:21 PM, Janos R. MX SL : Yes I make it, including last night and this day May 3, 2025 at 3:23 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please turn on agv no.1.2.3. and operate. May 3, 2025 at 3:28 PM, Dániel Hufnágel : AGV#1 operation has been started from 14:45! May 3, 2025 at 3:28 PM, Dániel Hufnágel : Now we runing 3 AGV at chatode side May 3, 2025 at 4:10 PM, 장영환(Younghwan Chang) : 양극 1,2라인 같이 돌릴때 투입 필요한 분체 개수는 100분에 10개입니다 매 100분마다 3호기에 5개, 1호기(혹은 2호기)에 5개가 이송되어야 합니다 1라인과 2라인의 자재 종류가 다르므로 각각 이송되어야 연속생산 가능합니다 May 3, 2025 at 4:27 PM, Varga Zoltán : Jelenleg AGV #3 kiállt a játékból, #2 hibával megállt katódon poron a #1 rá vár. Meg tudnátok nézni légyszi? May 3, 2025 at 4:27 PM, Dániel Hufnágel : Igen persze May 3, 2025 at 4:27 PM, Oláh András : Megyek May 3, 2025 at 4:27 PM, Dániel Hufnágel : Termelésen belül? May 3, 2025 at 4:28 PM, Varga Zoltán : Igen May 3, 2025 at 4:28 PM, Oláh András : @Dániel Hufnágel elhozod a kulcsot az asztalról? May 3, 2025 at 4:29 PM, Oláh András : Én már kint vagyok May 3, 2025 at 4:29 PM, Dániel Hufnágel : Én most indulok, és assyn a cipőm May 3, 2025 at 4:29 PM, Oláh András : Gyere mezítláb May 3, 2025 at 4:33 PM, Varga Zoltán : #3-as elindult May 3, 2025 at 5:25 PM, Kim daejung invited 임종현(JongHyun Lim). May 3, 2025 at 5:57 PM, 방혁 PM(Bang.Hyuk) FA : Sziasztok Night shift FA Technician Schedule Date: 2025.05.03 Time:18:00-06:00 1. Bang hyuk 2. Baek hojong Köszönöm szépen May 3, 2025 at 6:07 PM, Zagyva Tamás : Poron katód 3-hoz kérjük az anyagot,de a robot nem hozza.Nézzétek meg lécci May 3, 2025 at 6:11 PM, Farkas Tamàs : Nézem May 3, 2025 at 6:16 PM, Zagyva Tamás : E1PLC031-P01-re kellene anyagot hoznia May 3, 2025 at 6:17 PM, Zagyva Tamás : A ........-P02-n van anyag,de azt meg nem látja a szenzor mert a raklapot rátette az AGV a raklapterelőre May 3, 2025 at 6:43 PM, Zagyva Tamás : we manually request cathode material: 10 pallets 111-00169A(umicore) May 3, 2025 at 6:44 PM, Mohammad Amir : Good Evening, I am working in it. Thank you very much! May 3, 2025 at 6:49 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to contact me again if you need any further assistance. Thank you very much! May 3, 2025 at 10:59 PM, Powder tréner : Hali a por katod oldalon az 1 es AVG Bumper#2 hibával megált meg nézitek May 3, 2025 at 11:00 PM, Marsi Gábor : Meg May 3, 2025 at 11:00 PM, Powder tréner : Köszi May 3, 2025 at 11:01 PM, Zagyva Tamás : Már rajta van a szakember May 3, 2025 at 11:06 PM, Marsi Gábor : Kész May 4, 2025 at 6:07 AM May 4, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+1 overtime Overtime (1): Csanálosi Gábor Sick (1):Kiss Balázs Holiday (3): Nagy Gábor , Novák Zoltán , Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: , Nagy Zsolt, Csanálosi Gábor, Novák Károly 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 4, 2025 at 6:17 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AN powder stk A12 “MCP Control power Cp trip” Thanks May 4, 2025 at 6:18 AM, Dániel Hufnágel : On my way May 4, 2025 at 7:48 AM, Varga Zoltán : Sziasztok poron katód Air shower előtt #3 agv megállt nem nyílt ki az Air shower. Meg tudnátok nézni légyszi? May 4, 2025 at 7:49 AM, Szabadi Miki : Megyünk May 4, 2025 at 10:37 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cathode powder STK C12 Hoist driver error! May 4, 2025 at 10:39 AM, Szabadi Miki : Checking May 4, 2025 at 11:13 PM, Zagyva Tamás : Üdv Poron az anód 7-et kellene töltenünk,de nem hozza a robot az anyagot.Lécci nézzetek rá.Köszi May 4, 2025 at 11:14 PM, Marsi Gábor : Nézzük May 4, 2025 at 11:15 PM, Farkas Tamàs : Már viszi May 4, 2025 at 11:15 PM, Zagyva Tamás : Ok May 4, 2025 at 11:17 PM, Farkas Tamàs : A 8-ra is megy May 4, 2025 at 11:18 PM, Zagyva Tamás : Köszönöm May 5, 2025 at 6:11 AM May 5, 2025 at 6:11 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Szabadi Miklós, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladat May 5, 2025 at 10:50 AM, 윤경환 : @FA Foil E0STK001 : 245. MCP Safety Relay off Error. Please check it. May 5, 2025 at 10:54 AM, Szücs Géza FT-B : gondolom synustech May 5, 2025 at 11:38 AM, Varga Tamás Powder : Sziasztok a poron anod 7es soron az E1PLA071_P01 es porton hivtunk anyagot de nem világít a lámpa. Lehet a lézerrel van baj, de semmire nem reagál. Megtundátok nézni? Köszönöm May 5, 2025 at 11:40 AM, Szabadi Miki : Igen megyünk May 5, 2025 at 11:43 AM, Varga Tamás Powder : Az anyagot meg most hozta May 5, 2025 at 11:45 AM, Varga Tamás Powder : Most ahogy letette a palettát megint világít a lámpa May 5, 2025 at 11:53 AM, Rácz Dániel / FA : @Szabadi Miki A múltkor ugyan ez volt hogy megnyomták a LR-t és a gomb nem világított sem a lámpa, de vitte nekik a palettát. May 5, 2025 at 11:54 AM, Szücs Géza FT-B : sárga gomb 5mpig May 5, 2025 at 11:55 AM, Szabadi Miki : Most értünk fel May 5, 2025 at 11:55 AM, Rácz Dániel / FA : A fehér és a sárga gomb is levan ragasztva egy plexi darabbal. May 5, 2025 at 11:58 AM, Szücs Géza FT-B : @CS mit tud erről? May 5, 2025 at 11:58 AM, Varga Tamás Powder : Most megnyomtuk de nem reagált semmire May 5, 2025 at 11:59 AM, Varga Tamás Powder : Ahogy letette a palettát rá pár mp és világított a fehér May 5, 2025 at 12:02 PM, Rácz Dániel / FA : Ezt valamelyik éjszakában neked jeleztem, azt hiszem írtál is rólay May 5, 2025 at 1:33 PM, Varga Tamás Powder : 8as soron is ezt csinálja a 2es portnál. A sárgát megnyomom utánna a zöld világít de ha ujra hivom az AGV-t akkor megint nem világit May 5, 2025 at 1:33 PM, Varga Tamás Powder : Megtudnátok majd nézni? Köszönöm May 5, 2025 at 1:34 PM, Szücs Géza FT-B : kérlek várj, mindenki bent van tisztatérben May 5, 2025 at 1:34 PM, Varga Tamás Powder : Rendben. Este 6ig ráérek😁 May 5, 2025 at 1:40 PM, Szabadi Miki : Rendben nemsoká megyünk kitartás. May 5, 2025 at 4:56 PM, Varga Tamás Powder : Anod 2es soron a 3as AGV az 1es portra nem teszi be az anyagot. Megnéznétek? Köszönöm May 5, 2025 at 4:57 PM, Varga Tamás Powder : Poron May 5, 2025 at 4:58 PM, Szabadi Miki : Igen megyünk May 5, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 6, 2025 at 6:03 AM May 6, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 1Sl Overtime(2): Szabadi Miklós, Novák Károly Holiday(1): Czeilinger Krisztián Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Szabadi Miklós, Rácz Dániel --------------- Assy GF (4): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása v May 6, 2025 at 7:42 AM, Varga Tamás Powder : Sziasztok a poron anod oldalt air showerben 3as AGV megállt meg tudnátok nézni? Köszönöm May 6, 2025 at 7:43 AM, Szabadi Miki : Szia igen megyünk May 6, 2025 at 7:43 AM, Szücs Géza FT-B : ne geyere itt vagyok May 6, 2025 at 7:43 AM, Rácz Dániel / FA : @Szücs Géza FT-B fent vagy még CA oldalon ? May 6, 2025 at 7:43 AM, Rácz Dániel / FA : Ok May 6, 2025 at 7:43 AM, Rácz Dániel / FA : Thx May 6, 2025 at 7:44 AM, Szabadi Miki : Okés köszike May 6, 2025 at 7:44 AM, Szücs Géza FT-B : CA oldalon ACS nem tölt be May 6, 2025 at 7:44 AM, Rácz Dániel / FA : De itt kéne elhelyezni téged a Coateren May 6, 2025 at 7:52 AM, Szücs Géza FT-B : kész May 6, 2025 at 1:28 PM, Varga Tamás Powder : Sziasztok poron anos 2es soron az 1es port kéken villog. Nincs a raktárban anyag. Megnéznétek? Köszönöm. May 6, 2025 at 1:31 PM, Szücs Géza FT-B : @duzzaman Md (MCS) hi, please check the available materials to E1PLA021_P01. Thank You. May 6, 2025 at 1:33 PM, duzzaman Md (MCS) : 123 materials are available You're welcome. May 6, 2025 at 1:40 PM, Szücs Géza FT-B : akkor pls @Varga Tamás Powder sárga gomb, hátha sikerál May 6, 2025 at 1:40 PM, Varga Tamás Powder : Anod 1es sornál az AGV megállt. Megnéznétek? Köszönöm May 6, 2025 at 1:41 PM, duzzaman Md (MCS) : To add nore , there is no active LR/UR. The last job completed at this port was at 11.42 May 6, 2025 at 2:44 PM, Varga Tamás Powder : Anod 2es sorra nem jön az anyag. Utánna tudtok nézni? May 6, 2025 at 2:48 PM, duzzaman Md (MCS) : AGV 01 is on the way. May 6, 2025 at 2:48 PM, duzzaman Md (MCS) : To E1PLA021_P01 May 6, 2025 at 2:53 PM, Varga Tamás Powder : okay thanks May 6, 2025 at 3:09 PM, Varga Tamás Powder : Poron megint valaki küldött SI. Légyszives segitsetek letenni. Itt van anod a 2es sor mögött. Köszönöm May 6, 2025 at 3:16 PM, Varga Tamás Powder : @Szabadi Miki May 6, 2025 at 3:21 PM, Rácz Dániel / FA : Jövök May 6, 2025 at 3:26 PM, Rácz Dániel / FA : CA Slitt 2 nincs reel tálca May 6, 2025 at 3:26 PM, Rácz Dániel / FA : *üres May 6, 2025 at 3:34 PM, Varga Tamás Powder : Who sends out SI all the time? Because we don't ask for it May 6, 2025 at 3:55 PM, Rácz Dániel / FA : @Varga Tamás Powder @Szabó Zoltán János E1PLA043_P01-ről az ott lévő palettát béka segítségével kivettem, ez után az AGV letudta tenni a palettát. A benti kollégának jeleztem hogy tudjanak róla én vettem el onnan az anyagot. May 6, 2025 at 3:59 PM, Varga Tamás Powder : Rendben.Köszi May 6, 2025 at 4:01 PM, Szabó Zoltán János : Koszonom May 6, 2025 at 6:04 PM, 이민재 : Day shift FA Schedule Date: 2025.05.06 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo Lee minjae Köszönöm szépen May 6, 2025 at 7:21 PM, Baek Hojong(백호종)FA : @Mr.Miti (미티) FA Ca power AGV Check plz All not moving May 6, 2025 at 7:23 PM, Mr.Miti (미티) FA : Im on slitt an 5 May 6, 2025 at 7:24 PM, Baek Hojong(백호종)FA : I,m going ok May 6, 2025 at 7:27 PM, Mr.Miti (미티) FA : Thank you very much! May 6, 2025 at 10:48 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 7, 2025 at 3:27 AM May 7, 2025 at 3:27 AM, Powder tréner : Sziasztok szeretnék kérni segítséget powder anod raktáron elakadt egy palleta a convreyoron. May 7, 2025 at 3:30 AM, Mr.Miti (미티) FA : Rendben. May 7, 2025 at 3:58 AM, gutenkunstabelzoltan : Torott a raklap es elakad a szerkezetben egyenlore csak szenvedunk vele May 7, 2025 at 6:01 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 7, 2025 at 9:40 AM, Szabadi Miki : @Shahbaz 샤바즈 MCS/RTD please check E1PLC021_P01 and E1PLC061_P02 why doesn't material come if there is LR, thank you May 7, 2025 at 9:44 AM, Shahbaz 샤바즈 MCS/RTD : LR is not up for both. May 7, 2025 at 9:46 AM, Dániel Hufnágel invited Farkas Dániel Elekt. May 7, 2025 at 9:47 AM, Dániel Hufnágel : @Farkas Dániel Elekt légyszives ha por területén hiba lép fel, ide írd be! Köszönöm! May 7, 2025 at 9:49 AM, Farkas Dániel Elekt : Rendben May 7, 2025 at 9:55 AM, Szabadi Miki : then is there material available for the E1PLC061_P02, then why not take it? May 7, 2025 at 9:59 AM, Shahbaz 샤바즈 MCS/RTD : There has been no LR/UR since the last pallet was transferred to this station. Currently, materials are available, but a job will only be created once an LR/UR is received. May 7, 2025 at 10:01 AM, Szabadi Miki : Thank you. May 7, 2025 at 10:02 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC11 “Hoist driver error” Thanks May 7, 2025 at 10:04 AM, Szabadi Miki : Checking May 7, 2025 at 10:04 AM, Dániel Hufnágel : On my way May 7, 2025 at 10:09 AM, Oláh András : @Farkas Dániel Elekt a 6os soron a 2es portnál újra kellene nyomni az LR-t mert az MCS nem látja. May 7, 2025 at 11:02 AM, Farkas Dániel Elekt : Ez nekem sokat nem mond May 7, 2025 at 11:03 AM, Farkas Dániel Elekt : 5 gephez egyaltalan nem.megy May 7, 2025 at 11:18 AM, Janos R. MX SL : por katód #5 betöltőnél a paletta portoknál valami kábel szét van húzva vagy nem megfelelően csatlakoztatva azt érzékeli a portokba van anyag ezert nem hozz ide anyagot May 7, 2025 at 11:21 AM, Szabadi Miki : Uton vagyunk May 7, 2025 at 1:27 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC11 “Hoist driver error” Thanks May 7, 2025 at 3:37 PM, Farkas Dániel Elekt : Katodon ismet.megalltak a robotok Gyertek legyszives May 7, 2025 at 3:40 PM, Szabadi Miki : Megyünk May 7, 2025 at 6:19 PM, Zagyva Tamás : Sziasztok Poron katód 3-on megállt a robot.Nem teszi le az anyagot May 7, 2025 at 6:19 PM, Marsi Gábor : Már nézem May 7, 2025 at 6:45 PM, Zagyva Tamás : Sziasztok Poron katód 3-on megállt a robot.Már jön a kezelő May 7, 2025 at 6:55 PM, Marsi Gábor : Kész May 7, 2025 at 9:23 PM, Zagyva Tamás : Poron katód 1-en megállt a robot May 7, 2025 at 9:23 PM, Marsi Gábor : Úton May 7, 2025 at 11:28 PM, VK (mcs) : @FA Please check Anode powder STK A12 MCP control power CP trip May 7, 2025 at 11:41 PM, Marsi Gábor : Done May 8, 2025 at 12:24 AM May 8, 2025 at 12:24 AM, Zagyva Tamás : Poron az anód raktár előtt megállt a robot.Megnézitek? Köszönöm May 8, 2025 at 12:25 AM, Marsi Gábor : Megyek May 8, 2025 at 3:45 AM, VK (mcs) : @FA Please check Cathode powder STK C13 Hoist time over error! May 8, 2025 at 4:23 AM, Zagyva Tamás : Katód oldalon poron megállt a robot May 8, 2025 at 4:26 AM, Zagyva Tamás : Már működik May 8, 2025 at 4:26 AM, Marsi Gábor : Látom May 8, 2025 at 6:11 AM, Farkas Dániel Elekt : Sziasztok Por katod2 robot hiba May 8, 2025 at 6:11 AM, Farkas Dániel Elekt : Gyertek legyszives May 8, 2025 at 6:11 AM, Farkas Dániel Elekt : Koszi May 8, 2025 at 6:11 AM, Oláh András : Szia már úton vagyunk May 8, 2025 at 6:54 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András, Kiss Balázs Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsokt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 8, 2025 at 7:28 AM, Farkas Dániel Elekt : Katod poron ismet robot problema May 8, 2025 at 7:32 AM, Oláh András : Megyünk May 8, 2025 at 9:56 AM, Farkas Dániel Elekt : Katodon a robot megallt May 8, 2025 at 9:57 AM, Dániel Hufnágel : Air showeren belül? May 8, 2025 at 9:58 AM, Dániel Hufnágel : @Farkas Dániel Elekt May 8, 2025 at 10:13 AM, Farkas Dániel Elekt : Nem May 8, 2025 at 10:13 AM, Farkas Dániel Elekt : Kint a raktarnal elmeletilrg May 8, 2025 at 10:14 AM, Oláh András : Jövünk 👍 May 8, 2025 at 10:15 AM, Farkas Dániel Elekt : Airshowerbe ponrosan May 8, 2025 at 1:45 PM, Farkas Dániel Elekt : Katodon minden zold de nrm mennek sehova hosszu ideje May 8, 2025 at 1:45 PM, Farkas Dániel Elekt : Gyertek legyszives May 8, 2025 at 1:50 PM, Oláh András : Megyünk May 8, 2025 at 2:29 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC12 “Hoist time over error” Thank you May 8, 2025 at 2:58 PM, Kőszegi Bence Csaba : Sziasztok! Por raktár földszintre anód oldalra kérnék segítséget May 8, 2025 at 2:59 PM, Oláh András : Mindjárt visszamegyünk May 8, 2025 at 2:59 PM, Kőszegi Bence Csaba : Köszi May 8, 2025 at 4:07 PM, Oláh András : @Sazzad Bhai SKon can u delete pallett from E0CNVA11 RTV? May 8, 2025 at 4:09 PM, Sazzad Bhai SKon : There's no carrier on rtv May 8, 2025 at 4:10 PM, Oláh András : How i see it in ccs? May 8, 2025 at 4:11 PM, Sazzad Bhai SKon : Ccs also showing empty, no carrier there May 8, 2025 at 4:14 PM, Oláh András : Okay thank you 👍 May 8, 2025 at 4:20 PM, Sazzad Bhai SKon : The alarm is: laser sensor fault May 8, 2025 at 4:24 PM, Dániel Hufnágel : The problem is different, its just caused by technican standing before that sensor! May 8, 2025 at 5:53 PM, 윤경환 : @FA Hello. Please check the Data miss Match Alram in the GF of Anode. May 9, 2025 at 6:05 AM May 9, 2025 at 6:05 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 9, 2025 at 7:39 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA11_P01 Light curtain error The RTV is also OOS. Data missmatch error. Thanks May 9, 2025 at 7:47 AM, Szücs Géza FT-B : amint lesz szabad technikus intézkedünk May 9, 2025 at 7:49 AM, duzzaman Md (MCS) : Thank you for your tireless effort. May 9, 2025 at 9:16 AM, Szabó Zoltán János : Sziasztok, Poron anod 1 es anod 4 sorokon megalltak a robotok. Meg nezitek legyszives? May 9, 2025 at 9:17 AM, Szabó Zoltán János : Anodon 4 sort toltunk most, de katodon is fogunk 2 sort tolteni. May 9, 2025 at 9:20 AM, Varga Tamás Powder : 2es AGV várakozóban van a 4es sornál. Az 1es sprnál az anyag rajta van az AGV-n ha a fiuk a 2es portol betöltik az anyagot akkor teszi le a 3as AGV May 9, 2025 at 9:27 AM, Varga Tamás Powder : Megoldottam a problémát😇☺️ May 9, 2025 at 9:27 AM, Szabó Zoltán János : Koszonom szepen May 9, 2025 at 9:27 AM, Rácz Dániel / FA : Köszönjük ! 🙏 May 9, 2025 at 2:35 PM, Varga Tamás Powder : Sziasztok, a poron anod oldalt a 4es sornál nem tette le az anyagot a robot. Megtudnátok nézni? Köszönöm May 9, 2025 at 2:41 PM, Czeilinger Krisztián : Megyünk nemsokára. May 9, 2025 at 3:20 PM, Varga Tamás Powder : Sziasztok, a poron anod oldalt a 4es sornál az anyagot neki nyomta a másik anyagnak a robot. Megtudnátok nézni? Köszönöm May 9, 2025 at 3:21 PM, Szücs Géza FT-B : le tudnátok fotózni légyszives? May 9, 2025 at 3:25 PM, Varga Tamás Powder : Igen 😊 May 9, 2025 at 3:25 PM, Pálosi Róbert : Nincs kint gép May 9, 2025 at 3:29 PM, Varga Tamás Powder : Csináltam minden oldalról képet 😊 @Szücs Géza FT-B May 9, 2025 at 3:42 PM, 윤경환 : @FA 안녕하세요. 포일 창고 STK 1 5012포트 까지 케리어 정상 이동 했는데 크레인이 움직이지 않습니다. 확인 부탁 드립니다. May 9, 2025 at 4:10 PM, Czeilinger Krisztián : Kész May 9, 2025 at 4:53 PM, Szücs Géza FT-B : E0CNVA11 and E0STKA12 is also working again May 9, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 6:06 AM May 10, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 7/12 Tech, 1Sl Overtime(0): Holiday(3): Pintye Miklós, Kovács Ágnes, Boromisza Zoltán Sick(2): Gerbovits Kevin, BöröczbTamás --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(1): Denkó János --------------- The number of technicians is low. In all areas. May 10, 2025 at 7:38 AM, Varga Tamás Powder : Sziasztok. Segitséget szeretnék kérni anod oldalra raktárból le kellene venni az anyagot, és manuálisan kell bevinnünk mivel az air shower kapu nem jó. És a termelésből az AGV-et ki kellene hozni. Tudtok segíteni? Vagy esetleg valami megoldást erre? Egész napra kellene 1 ember aki tud segíteni @Szücs Géza FT-B May 10, 2025 at 8:07 AM, Szabó Zoltán János : Mihamarabbi segitseget szeretnenk kerni, ugyanis meg fognak allni a sorok. 4 sor uzemel es mar nincs bent anyag. May 10, 2025 at 8:32 AM, Szücs Géza FT-B : @Pálosi Róbert fog menni May 10, 2025 at 10:25 AM, Varga Tamás Powder : Hello. we need these materials on powder anode side: 10 palletts m36h 112-00247A 10 palletts cp3k 112-00242A 10 palletts m36h 112-00237A 10 palletts bsk10t 112-00239A Thank you May 10, 2025 at 10:54 AM, Varga Tamás Powder : @Shakir (MCS) May 10, 2025 at 10:57 AM, Shahbaz 샤바즈 MCS/RTD : @FA If there is a need to release the pallets, please let us know. Thank you. May 10, 2025 at 11:04 AM, Shahbaz 샤바즈 MCS/RTD : There are already auto transfers in progress, so releasing these to the conveyor port may disrupt those transfers if they are not received. Please confirm. May 10, 2025 at 2:04 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check anode powder stk A11, “MCP Control power CP trip” Thank you May 10, 2025 at 2:24 PM, Szücs Géza FT-B : omw May 10, 2025 at 2:24 PM, 임종현(JongHyun Lim) : @FA 112-00247A 자재가 mes상에 7200kg 입고등록 되어있는데 창고에 없나요? May 10, 2025 at 2:31 PM, Szücs Géza FT-B : solved, i think a bird or a rat or a big spider create this error 🤔 May 10, 2025 at 2:57 PM, 윤경환 : FA 담당분들 분체 스태커 크레인 문제로 파우더 1단 렉 내려 놓으시면 공유좀 부탁 드립니다. 1단에 있으면 원자재 관리팀도 제조도 못찾습니다.😭 May 10, 2025 at 3:18 PM, Varga Tamás Powder : Hello. we need these materials on powder anode side: 10 palletts cp3k 112-00242A 10 palletts m36h 112-00237A 10 palletts bsk10t 112-00239A Thank you May 10, 2025 at 3:22 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Szücs Géza FT-B Hello, is there any plan for a manual release? If we need to release them, please let us know. Thank you. May 10, 2025 at 3:29 PM, Szücs Géza FT-B : manual release is going, manufacturing need materials May 10, 2025 at 3:29 PM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you! May 10, 2025 at 4:42 PM, 윤경환 : 242A 10 plt Auto 237A 8 plt Auto + 2 plt Manual (PS112-2502190001,2) 239A 8 plt Auto + 2 plt Manual (PS112-2501260066,70) Material system Released. May 10, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 6:40 PM, Powder tréner : Hello. we need these materials on powder anode side: 10 palletts cp3k 112-00242A 20 palletts m36h 112-00237A 10 pallets M36H 112-00247A 5 palletts bsk10t 112-00239A Thank you May 10, 2025 at 6:40 PM, Mohammad Amir : Good Evening, Checking. Thank you very much! May 10, 2025 at 6:45 PM, Powder tréner : If possible, please publish it in mixed order because the material goes on different lines. Thank you. May 10, 2025 at 6:45 PM, Mohammad Amir : Sure, I am working on it! May 10, 2025 at 7:01 PM, Mohammad Amir : @FA Please check E0CNVA12 it is OOS that's why created jobs for materials transfer are in pending state. Thank you very much! May 10, 2025 at 7:16 PM, Balogh Ádám : Sziasztok a porra szeretnek kerni embert anyag kiszedéshez anodon a rossz airshower miatt May 10, 2025 at 7:16 PM, Mr.Miti (미티) FA : Szia. Érkezünk kis türelmet kerek May 10, 2025 at 7:37 PM, Powder tréner : Sziasztok,poron anód raktár kiált hibára. May 10, 2025 at 7:55 PM, Mohammad Amir : @FA This issue still exists, Please check it. Several jobs are pending. Thank you very much! May 10, 2025 at 7:56 PM, Balogh Ádám : Poron elfogyott a tölthető anyag, ha sikerül majd kikérni manuálisan újra indul a töltés May 10, 2025 at 7:56 PM, Balogh Ádám : Majd jelezzetek mikor tudtok küldeni embert May 10, 2025 at 7:58 PM, Mr.Miti (미티) FA : Úton vannak már May 10, 2025 at 8:05 PM, Mohammad Amir : All requested materials have been transferred ✅. Except 112-00247A ,there was only 8 materials available so I have transferred all 8 materials. Feel free to contact me again if you need any further assistance. Thank you very much! May 10, 2025 at 8:23 PM, Balogh Ádám : Azóta is várunk May 11, 2025 at 6:09 AM May 11, 2025 at 6:09 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12+1+1 Tech, 1Sl Overtime(0): Holiday(2): Kovács Ágnes, 방혁_이반차 Sick(1): Gerbovits Kevin Shift Change(1): Böröczki Balázs --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok May 11, 2025 at 6:14 AM, Varga Tamás Powder : Hello. we need these materials on powder anode side: 20 palletts m36h 112-00237A 20 palletts bsk10t 112-00239A Thank you Sziasztok segitséget szeretnék majd kérni a paletták leszedésére anod oldalra. Köszönöm May 11, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.11 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 11, 2025 at 6:24 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! We are releasing them to CNVA12_P07 Thank you May 11, 2025 at 6:27 AM, Varga Tamás Powder : And 10 palletts cp3k 112-00242A Thank you May 11, 2025 at 6:29 AM, Shahbaz 샤바즈 MCS/RTD : There were only six M36 112-00237A pallets; I created the transfer command for those. May 11, 2025 at 6:33 AM, Varga Tamás Powder : This message was deleted. May 11, 2025 at 6:33 AM, Varga Tamás Powder : Okay May 11, 2025 at 6:34 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for 18 available BSK10T 112-00239A pallets. May 11, 2025 at 6:38 AM, Varga Tamás Powder : Okay May 11, 2025 at 6:39 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for 10 CP3K 112-00242 as well. Thank you May 11, 2025 at 6:43 AM, Varga Tamás Powder : okay thank you May 11, 2025 at 6:43 AM, Shahbaz 샤바즈 MCS/RTD : You’re welcome. May 11, 2025 at 8:29 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Powder stk A13 “Ready off during forking” Thank you May 11, 2025 at 8:29 AM, Szücs Géza FT-B : i go May 11, 2025 at 8:38 AM, Szücs Géza FT-B : done May 11, 2025 at 8:39 AM, Shahbaz 샤바즈 MCS/RTD : Thank you May 11, 2025 at 9:24 AM, Szücs Géza FT-B : STKA13 repaired again May 11, 2025 at 9:52 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Powder stk A13 “Ready off during forking” again Thank you May 11, 2025 at 9:58 AM, Rácz Dániel / FA : De mindenki az elektródán van 🥹 May 11, 2025 at 9:59 AM, Rácz Dániel / FA : @Pálosi Róbert megnéznéd kérlek ? Köszönöm May 11, 2025 at 10:01 AM, Rácz Dániel / FA : Coating line priority first. Sorry Sir. @Pálosi Róbert going to checking. May 11, 2025 at 10:02 AM, Rácz Dániel / FA : @Pálosi Róbert Kint maradt a villa ha jól látom az SCS-ben. May 11, 2025 at 10:16 AM, Czeilinger Krisztián : Itt vagyunk. May 11, 2025 at 10:29 AM, Pálosi Róbert : Kész May 11, 2025 at 11:37 AM, Szücs Géza FT-B : Poron 1F CA oldalon, kívül, CNV-t újra kellene indítani. P08-on centerezési hiba van, le kellene ellenőrizni, hogy mi van vele. @Rácz Dániel / FA @Csanálosi Gábor FA valaki meg tudná nézni légyszives? May 11, 2025 at 11:38 AM, Csanálosi Gábor FA : Én még gf assyn délig May 11, 2025 at 12:07 PM, Szücs Géza FT-B : úton May 11, 2025 at 12:15 PM, Szücs Géza FT-B : E0CNVC12 working again jogos a taps és a sikoly! 🫡😉😂 May 11, 2025 at 12:16 PM, Szücs Géza FT-B : E0CNVA12 toooo May 11, 2025 at 12:20 PM, Csanálosi Gábor FA : Photo May 11, 2025 at 1:05 PM, Varga Tamás Powder : Sziasztok. A poron a catod raktárban majdnem egymásba ment a 2 AGV. Megtudnátok nézni? Köszönöm May 11, 2025 at 1:16 PM, Szücs Géza FT-B : úton vannak May 11, 2025 at 2:55 PM, Varga Tamás Powder : Poron catod oldalt air showerben megállt az AGV. Megnézitek? Köszönöm May 11, 2025 at 3:00 PM, Szücs Géza FT-B : @Rácz Dániel / FA majd meg tudod nézni? May 11, 2025 at 3:01 PM, Rácz Dániel / FA : Yes May 11, 2025 at 3:01 PM, Rácz Dániel / FA : Nem sokára érkezem May 11, 2025 at 3:17 PM, Rácz Dániel / FA : Itt vagyok 🫡 May 11, 2025 at 3:17 PM, Szücs Géza FT-B : nemkell, zolival lenavitroloztuk ez tévkapcsolat May 11, 2025 at 3:17 PM, Szücs Géza FT-B : Zolit verd meg mer nem bír magával May 11, 2025 at 3:28 PM, Rácz Dániel / FA : @Pálosi Róbert Poron anód oldalon van egy kis asztal, azon van egy teljes álarc illetve egy sapka. Esetleg ez a tiéd ? May 11, 2025 at 3:32 PM, Rácz Dániel / FA : @Szücs Géza FT-B @Szabó Zoltán János @Varga Tamás Powder 1F Anód Poron lekapcsolom a AGV-ket, mert nincs termelés. Az ajtó hibája miatt, úgyis kézzel kell a palettákat levenni. May 11, 2025 at 3:32 PM, Varga Tamás Powder : Rendben May 11, 2025 at 3:53 PM, Szücs Géza FT-B : tuti May 11, 2025 at 4:14 PM, Varga Tamás Powder : A poron catod oldalt hivtunk anyagot de nem jön. Megtudnátok nézni? (Catod 1es és 3as sor) May 11, 2025 at 4:16 PM, Pálosi Róbert : Megyek May 11, 2025 at 4:17 PM, Szücs Géza FT-B : @Sazzad Bhai SKon please check the available materials. Thank You! May 11, 2025 at 4:18 PM, Szücs Géza FT-B : várj, ha nincs hibaüzenet, semmi sem piros, akkor elöször mindig le kell ellenőriztetni @MCS-el, hogy van-e elérhető áru. May 11, 2025 at 4:19 PM, Varga Tamás Powder : Lehet hogy megoldódott. Megnyomtam a sárga gombot és most jön az anyag a raktárból May 11, 2025 at 4:20 PM, Szabó Zoltán János : Meholdottuk May 11, 2025 at 4:20 PM, Szabó Zoltán János : G May 11, 2025 at 4:22 PM, Szücs Géza FT-B : sárga gomb? May 11, 2025 at 4:23 PM, Varga Tamás Powder : Igen May 11, 2025 at 4:23 PM, Shahbaz 샤바즈 MCS/RTD : Powder Available materials: Ca line 3 : 198 Line 1 : 70 May 11, 2025 at 4:24 PM, Szabó Zoltán János : Line2? ☺️🤔 May 11, 2025 at 4:25 PM, Shahbaz 샤바즈 MCS/RTD : Just LR received and jobs are created. May 11, 2025 at 4:26 PM, Shahbaz 샤바즈 MCS/RTD : Line 1/2 same May 11, 2025 at 5:33 PM, Szabó Zoltán János : Most is volt agv problema, helyre allitottam. 3 sornal tul tolta a palettat ra a lepcsore. Megoldottam May 11, 2025 at 6:48 PM, Powder tréner : Sziasztok,poron Katód raktár nem adja ki E1PLC031_P01 portra az anyagot. Nézzétek rá.Köszönöm. May 12, 2025 at 3:17 AM May 12, 2025 at 3:17 AM, Powder tréner : Sziasztok szeretnék kérni segítséget powder katodon a 2AGV elakadt (nekiment lépcsőnek).S.O.S May 12, 2025 at 3:54 AM, Balogh Ádám : Sziasztok ezt megtudnátok nezni mert igy egyik sort sem tudjuk tölteni es meg fogunk állni, az elakadt AGV blokkolja a többit is May 12, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Iváncsa "C" shift (06:00-18:00) 12 Tech, 0 SL Beteg(sick ): 1 Sarvajz Ferenc Szabadság(Holisay): 1, Farkas Tamás(SL) Helyettesít(Substitution): 2, Szücs Géza Imre(SL), Boromisza Zoltán Túlóra(Overtime): 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Csuti Zoli Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasz May 12, 2025 at 6:12 AM, Zagyva Tamás : Jó reggelt Poron katód oldalon a 3-asnál megálltak a robotok.Lécci nézzétek meg mert tölteni kellene May 12, 2025 at 6:15 AM, Marsi Gábor : Megyek May 12, 2025 at 6:16 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.12 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 12, 2025 at 6:33 AM, Marsi Gábor : Kész May 12, 2025 at 6:34 AM, Zagyva Tamás : Köszi May 12, 2025 at 7:49 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA11_C01 MCP Control power CP Trip Thanks May 12, 2025 at 8:15 AM, Marsi Gábor : Done May 12, 2025 at 8:43 AM, 윤경환 : 이거 금요일에 말씀 드렸는데 아직도 그 상태로 있네요. @Baek Hojong(백호종)FA 피엠님 확인 부탁 드립니다. May 12, 2025 at 8:44 AM, Baek Hojong(백호종)FA : 제가 확인해볼께요 조장님 May 12, 2025 at 8:49 AM, 윤경환 : 감사 합니다. May 12, 2025 at 9:03 AM, Zagyva Tamás : Poron katód oldalon megállt a robot.Meg kellene tekinteni.Köszönöm May 12, 2025 at 9:07 AM, Marsi Gábor : Megyek May 12, 2025 at 9:23 AM, Marsi Gábor : Kész May 12, 2025 at 9:43 AM, Kőszegi Bence Csaba : Sziasztok! Fóliaraktár kinti részre (betárolás) kérnék segítséget! Nem viszi el a daru az anyagot a tálcáról. Köszi May 12, 2025 at 9:44 AM, Szücs Géza FT-B : kimegyek May 12, 2025 at 9:45 AM, Kőszegi Bence Csaba invited Gábor. May 12, 2025 at 9:52 AM, Szücs Géza FT-B : lesz ott valaki aki beenged? Nem nyitja a kártyám az ajtot. May 12, 2025 at 9:52 AM, Kőszegi Bence Csaba : Szólj ha itt vagy May 12, 2025 at 9:56 AM, Szücs Géza FT-B : ittvagyooopk May 12, 2025 at 9:56 AM, Szücs Géza FT-B : jah nyitva May 12, 2025 at 10:26 AM, Zagyva Tamás : Poron katod 3-on megállt a robot.Nézzétek meg lécci.Kösz May 12, 2025 at 10:26 AM, Marsi Gábor : Megyek May 12, 2025 at 10:37 AM, Marsi Gábor : Kész May 12, 2025 at 11:58 AM, Zagyva Tamás : Katód 2-n megállt a robot May 12, 2025 at 12:00 PM, Marsi Gábor : Most értem le. Mindjárt megyek akkor vissza May 12, 2025 at 12:15 PM, Marsi Gábor : Kész May 12, 2025 at 2:01 PM, Powder tréner : Hali a Por katod Oldalon az Air shower ben megált az AGV nézétek meg léci May 12, 2025 at 2:02 PM, Marsi Gábor : Megyek May 12, 2025 at 2:13 PM, Marsi Gábor : Kész May 12, 2025 at 6:35 PM, Varga Zoltán : Hello por anód oldalon az AGV-K ki vannak kapcsolva anyag várakozik be tudnátok kapcsolni? Köszönöm May 12, 2025 at 6:54 PM, Varga Zoltán invited Horváth Tamás. May 12, 2025 at 7:06 PM, Kiss Balázs F.A. : 1-2 re kéne új order légyszíves May 12, 2025 at 7:09 PM, Oláh András : @VK (mcs) can you check material for E1PLA011_P01 and P02? May 12, 2025 at 7:10 PM, Oláh András : We see material on cv and E0CNVA12_P07 but no order created May 12, 2025 at 7:10 PM, VK (mcs) : Checking May 12, 2025 at 7:11 PM, VK (mcs) : LR received but no available material. May 12, 2025 at 7:13 PM, VK (mcs) : These materials have been released base on OPs requests to manual transition. 2 days ago. Should I return them to STK? May 12, 2025 at 7:13 PM, Oláh András : Yes please May 12, 2025 at 7:15 PM, Oláh András : @Varga Zoltán elvileg nincs elérhető anyag az 1es sorra May 12, 2025 at 7:16 PM, Varga Zoltán : Rendben köszi May 12, 2025 at 8:01 PM, Varga Zoltán : Katód oldalon bent a területen AGV #1 #3 megállt, nézzétek meg légyszi May 12, 2025 at 8:03 PM, VK (mcs) : I created transfer command but conveyor port is OoS. Can you check anode conveyor 12 port 8 E0CNVA12-P08. May 12, 2025 at 8:06 PM, Szabadi Miki : Megyünk May 12, 2025 at 8:20 PM, Csanálosi Gábor FA : Done May 12, 2025 at 8:46 PM, VK (mcs) : @FA Please check Anode powder STK A12 Load size information error! May 12, 2025 at 9:09 PM, Varga Zoltán : E1PLC021-P01 P02 we pushed LR button but materials dont come out from automatic warehouse. lCan you help me please @VK (mcs) May 12, 2025 at 9:13 PM, VK (mcs) : We didn’t receive LR Last LR was at 19:29 and material delivered successfully. Can you apply again May 12, 2025 at 9:16 PM, Varga Zoltán : I pushed LR again. White light blinking May 12, 2025 at 9:22 PM, VK (mcs) : Now for both port MCS received LR and carriers assigned. May 12, 2025 at 9:22 PM, Varga Zoltán : Ok it is working now thank you May 12, 2025 at 9:42 PM, Csanálosi Gábor FA : @VK (mcs) can you pls check in rtd all informations about PS112-2501260061 ? The crane has load size information error, but no sensor for that on the crane, and all other is good. May 12, 2025 at 9:52 PM, VK (mcs) : 11th May at 6:31:45 job created from STK 13 to CNVA12-P07 due to OPs request. Job successfully delivered to port 7 20th May at 19:20:12 Again on the request of operations . I created transfer command to the STK A12 Rack out and rack in reply was success. May 12, 2025 at 9:54 PM, Csanálosi Gábor FA : Indeed, but to me looks like missing some parameter, i guess (not sure) pallet size? We cannot see what missing May 12, 2025 at 9:58 PM, VK (mcs) : It seems good. Carrier has been transferred from STK 13 to CNV and then STK 12 . Can you take it out and send it to STK 13 ? May 12, 2025 at 9:59 PM, Csanálosi Gábor FA : Sadly no, the crane wont move May 12, 2025 at 10:21 PM, KIM SEYEON [김세연]_FA : was the problem solved? May 12, 2025 at 10:22 PM, Dániel Hufnágel : @이주봉PM LEE JUBONG(FA) checking it now May 12, 2025 at 10:44 PM, 이주봉PM LEE JUBONG(FA) : Solved May 12, 2025 at 11:08 PM, Varga Zoltán : AGV 3 megállt katód air shower előtt nézzétek meg légyszi May 12, 2025 at 11:27 PM, Varga Zoltán : Mikor tudtok jönni? May 12, 2025 at 11:27 PM, Oláh András : Jövünk May 12, 2025 at 11:27 PM, Horváth Tamás : Hello a poron az AGV 3as még mindig áll. Gyertek kérlek mert jó lenne q termelésbe. FONTOS lenne. May 13, 2025 at 2:06 AM May 13, 2025 at 2:06 AM, Janos R. MX SL : AGV-k ismét állnak a poron a katód oldalon May 13, 2025 at 2:07 AM, Varga Zoltán : Sziasztok poron katód #3- nál megállt az AGV nézzétek meg légyszi May 13, 2025 at 2:07 AM, Dániel Hufnágel : Srácok már úton May 13, 2025 at 2:08 AM, Oláh András : Jövünk már 👍 May 13, 2025 at 6:12 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.13 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 13, 2025 at 6:14 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.13 FA Iváncsa "C" shift (06:00-18:00) 14 Tech, 1 SL Beteg(sick): 1, Sarvajz Ferenc Szabadság(Holisay): 2, Farkas Tamás(SL), Fabriczius Gergely Helyettesít(Substitution): 2, Böröcz Tamás, Pálosi Róbert, Szücs Géza Imre(SL) Túlóra(Overtime): 1, Édl Tamás --- Electrode (5) --- Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Pálosi Róbert --- Assembly 1F(3) --- Csuti Zoli Gégény Dávid Böröcz Tamás ---Assembly GF(3) --- Kertész Dániel Lajos Gábor Nagy Tamás --- May 13, 2025 at 6:43 AM, Zagyva Tamás : Jó reggelt Poron katód oldalon megállt a robot az airshowerben.Meg kellene nézni. Köszönöm May 13, 2025 at 6:43 AM, Marsi Gábor : Megyek May 13, 2025 at 8:58 AM, Zagyva Tamás : Poron katód oldalon a termelési területen megállt a robot.Akadályozza másikat is. May 13, 2025 at 8:59 AM, Marsi Gábor : Nézem May 13, 2025 at 9:02 AM, Marsi Gábor : Kész May 13, 2025 at 1:04 PM, Molnár Ferenc : Sziasztok! Földszinten anód oldali por raktárból kérek segítséget. CV04-014 Pallette Abnormal Position Alarm May 13, 2025 at 1:05 PM, Molnár Ferenc : Elektróda May 13, 2025 at 1:06 PM, Marsi Gábor : Megyünk May 13, 2025 at 1:23 PM, Kőszegi Bence Csaba : Sziasztok! Fólia raktárhoz kérnék segítséget. Az 1-es daru nem viszi el a fóliát. (Betárolásnál) May 13, 2025 at 1:24 PM, Skwarek Tibor : Megyünk May 13, 2025 at 1:35 PM, Marsi Gábor : Kész May 13, 2025 at 4:02 PM, Zagyva Tamás : Poron az air showerben megállt a robot.Nézzétek meg lécci May 13, 2025 at 4:15 PM, Zagyva Tamás : Tud jönni valaki? May 13, 2025 at 4:16 PM, Marsi Gábor : Igen mindjárt megyek May 13, 2025 at 4:16 PM, Zagyva Tamás : Oksa May 13, 2025 at 4:37 PM, Marsi Gábor : Kész May 13, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (0):- Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 13, 2025 at 7:13 PM, Varga Zoltán : Sziasztok poron katód air showerben megállt #1 agv. Nézzétek meg légyszi köszönöm May 13, 2025 at 7:14 PM, Szabadi Miki : Megyünk May 13, 2025 at 8:23 PM, Varga Zoltán : Hali a raktár előtt 2 AGV egymást akadályozza gyertek légyszi May 13, 2025 at 8:25 PM, Szabadi Miki : Megyünk May 13, 2025 at 9:27 PM, Horváth Tamás : Katódon megállt az AGV megint May 13, 2025 at 9:29 PM, Horváth Tamás : Nem rakta le a raklapot.. May 13, 2025 at 9:29 PM, Szabadi Miki : Rendben mindjárt megyünk May 13, 2025 at 10:33 PM, Horváth Tamás : Sziasztok.. Ismételten megállt az AGV katód poron. May 13, 2025 at 10:33 PM, Oláh András : 😱 Megyünk May 14, 2025 at 12:16 AM May 14, 2025 at 12:16 AM, Varga Zoltán : Katód #3-nál ismét megállt az AGV nézzétek meg légyszi May 14, 2025 at 2:19 AM, Horváth Tamás : Megállt a poron az AGV a gyártás területén. May 14, 2025 at 2:22 AM, Horváth Tamás : Meg az air showerbe is May 14, 2025 at 2:23 AM, Szabadi Miki : Jo hogy nincs sokkal több agv ami megálljon 😅 May 14, 2025 at 2:35 AM, Horváth Tamás : Zavarta a lépcső a Katód 3nál. Valamiért ragaszkodik hozzá. May 14, 2025 at 2:37 AM, Dániel Hufnágel : Nappalosban támogatók foglalkoznak vele, még az éjszaka folyamán szíves türelmet kérünk May 14, 2025 at 3:15 AM, Varga Zoltán : Katód air showerben megállt az AGV #2 megnéznétek légyszives? May 14, 2025 at 5:51 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.14 "B" műszak, 8+1/12+1 Tech, 1Sl Overtime(0): Holiday(3): Csanálosi Gábor, Takács Ádám, Kovács Ágnes Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Böröcz Tamás, Rácz Dániel --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- Support: 방혁_이반차 (Bang Hyuk) May 14, 2025 at 7:31 AM, Varga Tamás Powder : Sziasztok a poron katod oldalt az air showerban megált az AGV. Megtudnátok nézni? Köszönöm May 14, 2025 at 7:32 AM, Szücs Géza FT-B : Jobb reggelt!!! Melyik oldalon van porbetöltés jelenleg? May 14, 2025 at 7:33 AM, Varga Tamás Powder : Jelenleg katod oldalt. De majd lessz anod is May 14, 2025 at 7:35 AM, Varga Tamás Powder : De katodon sok az AGV probléma. Esetleg meglehet oldani hogy 1 ember fent legyen? May 14, 2025 at 7:39 AM, Szücs Géza FT-B : a 2ből? May 14, 2025 at 7:40 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA can u help on Powder area? in AN airshower May 14, 2025 at 7:49 AM, 방혁 PM(Bang.Hyuk) FA : Okay wait May 14, 2025 at 7:52 AM, Varga Tamás Powder : Kihoztam az AGV-t 😊 May 14, 2025 at 11:15 AM, Varga Tamás Powder : Sziasztok a poron katod oldalt nem adja ki a raktár az anyagot. Az AGV meg csak úgy bemegy a termelésbe. Megtudnátok nézni? Köszönöm May 14, 2025 at 11:19 AM, Szabó Zoltán János : Ezt megelozoen egy koreai kollega nyomkodta a raktarat. May 14, 2025 at 11:19 AM, Szücs Géza FT-B : acsm nevű felhasználó manuális paranccsal küldte oda. May 14, 2025 at 11:20 AM, Szücs Géza FT-B : szerintem a porton fogják beállítani az adatokat May 14, 2025 at 11:20 AM, Szabó Zoltán János : Agvt pedig laptoppal buvolte May 14, 2025 at 11:22 AM, Szabó Zoltán János : Anyagot nem ad ki a raktar. Ki is all hibara. 3 sorra kell anyag, szval szuksegunk van mihamrabbi segitsegre. Koszonom May 14, 2025 at 11:22 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA can u check the CNVC12? RTV-Port Data loss error. Carrier not moving to the port from RTV May 14, 2025 at 11:22 AM, Szücs Géza FT-B : jelenleg melyik oldalt megy betöltés? May 14, 2025 at 11:24 AM, Szabó Zoltán János : Egyenlore Katod May 14, 2025 at 11:24 AM, Szabó Zoltán János : De delutan valoszinuleg anod is fog menni May 14, 2025 at 11:25 AM, Szücs Géza FT-B : az jó, mert akkor bentről fel tudok menni és AN ildalon ki tudok menni May 14, 2025 at 11:26 AM, Szücs Géza FT-B : dont go, i will go May 14, 2025 at 11:26 AM, 방혁 PM(Bang.Hyuk) FA : Cathode powder? May 14, 2025 at 11:27 AM, Szücs Géza FT-B : i going inside May 14, 2025 at 11:39 AM, Szücs Géza FT-B : kész May 14, 2025 at 11:44 AM, 방혁 PM(Bang.Hyuk) FA : @연해리 @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 분체창고에서 AGV로 파레트 하역시 파레트에 감겨있는 밴드로 인해 AGV포크 걸리면서 화물 못뜨는 문제 지속 발생합니다 May 14, 2025 at 11:51 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. May 14, 2025 at 11:55 AM, 윤경환 : 저희 지금 밴딩 제거 해서 투입 하고 있는데 어떤 자재가 문제가 되고 있는걸까요..? May 14, 2025 at 11:56 AM, KIM SEYEON [김세연]_FA : 사진 있을까요? May 14, 2025 at 11:57 AM, 방혁 PM(Bang.Hyuk) FA : 넵 찍어두었습니다 May 14, 2025 at 11:59 AM, 윤경환 : 안녕하세요 피엠님 어떤 자재인지 알수 있을까요..? May 14, 2025 at 12:08 PM, 방혁 PM(Bang.Hyuk) FA : 유선으로 설명드렸습니다! May 14, 2025 at 1:02 PM, Varga Tamás Powder : AGV does not put down the pallet. powder cathode at port 2. Can anyone help? May 14, 2025 at 1:18 PM, Varga Tamás Powder : Raktárban is megáltak a 2 AGV és várakozóban vannak. Valaki tudna segíteni hogy tudjanak a sorokra menni? May 14, 2025 at 1:38 PM, Szücs Géza FT-B : megyek May 14, 2025 at 1:38 PM, KIM SEYEON [김세연]_FA : agv #2 alarm should be cleared May 14, 2025 at 1:40 PM, Szücs Géza FT-B : Don't I need to go up? May 14, 2025 at 1:41 PM, KIM SEYEON [김세연]_FA : please go up May 14, 2025 at 1:42 PM, KIM SEYEON [김세연]_FA : I am in NC room May 14, 2025 at 1:42 PM, Szücs Géza FT-B : ok May 14, 2025 at 1:42 PM, Szücs Géza FT-B : OMW May 14, 2025 at 1:53 PM, Szücs Géza FT-B : Ma délután 5:00-ig a synustech és SK C&C felügyeli a por területet, ők fognak intézkedni. May 14, 2025 at 2:02 PM, Rácz Dániel / FA : 17:00, 05:00 PM ? May 14, 2025 at 2:03 PM, Szücs Géza FT-B : úgy, azt mondták May 14, 2025 at 5:59 PM, adambenczik : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician 0 SL ———————————— Electrode (2): Benczik Ádám Gutenkunst Ábel Zoltán ———————————— Assembly(5): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 14, 2025 at 7:01 PM, Powder tréner : Sziasztok poron anod oldalon a raktár nem adja ki E1PLA021-P01 portra az anyagot. Nézzétek rá. May 14, 2025 at 7:01 PM, Mohammad Amir : Good evening, Checking May 14, 2025 at 7:02 PM, Mohammad Amir : Currently we don't have materials unfortunately, as soon as materials will be available jobs will be created as there is already an active LR. Thank you very much! May 15, 2025 at 1:59 AM May 15, 2025 at 1:59 AM, Horváth Tamás : Sziasztok Anód oldalt az 1es AGV megállt. Bent a területen May 15, 2025 at 2:45 AM, adambenczik : Kész May 15, 2025 at 3:33 AM, Horváth Tamás : Hello Poron, katód oldalt a raktár nem adja ki az alapanyagot. Kiállt hibára. May 15, 2025 at 3:36 AM, adambenczik : Rendben, megyünk May 15, 2025 at 3:36 AM, Horváth Tamás : Köszi May 15, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.15 "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(4): Csanálosi Gábor, Takács Ádám, Kovács Ágnes , 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(0): May 15, 2025 at 6:03 AM, Szücs Géza FT-B : megnézzük May 15, 2025 at 6:59 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CA stk C13 “Ready off during forking “ and stk C11 “Travel driver error” Thank you May 15, 2025 at 7:03 AM, Szücs Géza FT-B : at 03:57 :) we are here May 15, 2025 at 7:21 AM, Szücs Géza FT-B : working May 15, 2025 at 7:21 AM, Szücs Géza FT-B : RTV working again May 15, 2025 at 7:22 AM, Szücs Géza FT-B : @Varga Zoltán CA oldalra AGV is elindult May 15, 2025 at 7:25 AM, Varga Tamás Powder : Köszi😊 May 15, 2025 at 8:52 AM, Szücs Géza FT-B : 1es soron mi történt? May 15, 2025 at 9:23 AM, Varga Tamás Powder : A villánál a szenzort nem érzékelte és kiált hibára. De megoldódott May 15, 2025 at 9:24 AM, Varga Tamás Powder : Poron catode oldalt a 3as sorra nem viszi az AGV az anyagot a raktárból, pedig a raktárban a portnál kint az anyag. Megtudnátok nézni? Köszönöm May 15, 2025 at 9:36 AM, Rácz Dániel / FA : Megoldva. @Varga Tamás Powder Köszönöm a segítséget. May 15, 2025 at 9:37 AM, Varga Tamás Powder : Én is köszönöm a gyors segítséget 😊 May 15, 2025 at 11:05 AM, Varga Tamás Powder : Köszi hogy szóltál, megoldottam a hibát😊 @Rácz Dániel / FA May 15, 2025 at 11:05 AM, Rácz Dániel / FA : Nincs mit, én köszönöm a kópérációt ! 😎 May 15, 2025 at 1:10 PM, Szücs Géza FT-B : @VK (mcs) @Shahbaz 샤바즈 MCS/RTD AGV CA#1 is under installation, please ignore the error message. May 15, 2025 at 1:33 PM, Szücs Géza FT-B : CNVC12 RTV törött raklap megakadt rajta, ezért áll May 15, 2025 at 2:03 PM, Szücs Géza FT-B : ismét megyen May 15, 2025 at 2:03 PM, Szücs Géza FT-B : most is szalad May 15, 2025 at 2:07 PM, Szabó Zoltán János : 1500 ☝️😎 May 15, 2025 at 2:08 PM, Szücs Géza FT-B : ócó May 15, 2025 at 3:57 PM, Varga Tamás Powder : @Shahbaz 샤바즈 MCS/RTD Please delete the task for port 1 on line 6 of anode because there is material there and the AGV almost went to her twice (I switched to manual in time) Thank you. May 15, 2025 at 4:04 PM, Shahbaz 샤바즈 MCS/RTD : The transfer is aborted but the pallet is still on AGV#03. Should I transfer back to the warehouse? May 15, 2025 at 4:08 PM, Varga Tamás Powder : I moved it to line 1 May 15, 2025 at 4:15 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Powder stk A12 “Ready off during forking” Thank you May 15, 2025 at 5:19 PM, 윤경환 : This message was deleted. May 15, 2025 at 5:22 PM, 윤경환 : @FA Hello. Please check the Data miss Match Alram and STK2 Ready off During Forking Error in the GF of Anode. May 15, 2025 at 5:29 PM, 윤경환 : @FA Please check Powder stk A12 Error Code : 147. Port Interface Error. May 15, 2025 at 5:37 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B is there anyone can solve this problem? May 15, 2025 at 6:00 PM, adambenczik : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician 0 SL ———————————— Electrode (2): Benczik Ádám Gutenkunst Ábel Zoltán ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Édl Tamás ———————————— May 15, 2025 at 6:11 PM, adambenczik : We are coming May 15, 2025 at 6:12 PM, KIM SEYEON [김세연]_FA : thank you May 15, 2025 at 6:31 PM, Powder tréner : Sziasztok,szeretnék kérni segítséget,poron anód raktárba conveyoron elakadt egy raklap és nem jön ki. May 15, 2025 at 6:31 PM, adambenczik : Lent vagyunk a daruknál May 15, 2025 at 6:32 PM, adambenczik : Why does STKA12 shut the power off, if I reset the Door Open Error? May 15, 2025 at 6:35 PM, KIM SEYEON [김세연]_FA : no work today May 15, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : please call someone from the storage if nobody, reset door. May 15, 2025 at 6:36 PM, adambenczik : We can't reset the Door, that is the problem May 15, 2025 at 6:40 PM, KIM SEYEON [김세연]_FA : one question only gf powder has a problem? May 15, 2025 at 6:42 PM, adambenczik : STKA12 and 1F conveyor problem May 15, 2025 at 6:46 PM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) 피엠님 분체쪽 상기현상 확인 가능할까요? May 15, 2025 at 6:55 PM, 이주봉PM LEE JUBONG(FA) : 넵 May 15, 2025 at 6:58 PM, adambenczik : Conveyor problem is solved May 15, 2025 at 7:06 PM, adambenczik : STKA12 shows Load Size Information Error May 15, 2025 at 7:06 PM, 이주봉PM LEE JUBONG(FA) : Okay wait me May 15, 2025 at 8:45 PM, Powder tréner : S.O.S Poron anód raktáron kieset a raklap a Conveyorbol. May 15, 2025 at 8:45 PM, adambenczik : Photo May 15, 2025 at 9:27 PM, 장영환(Younghwan Chang) : @이주봉PM LEE JUBONG(FA) PM님 음극 1F 분체창고에서 분체 파레트 하나가 넘어진 것 같은데 근무중이시면 확인 부탁드립니다 May 15, 2025 at 9:30 PM, Koncz Tamás : We already informed him. May 15, 2025 at 9:33 PM, 이주봉PM LEE JUBONG(FA) : 네 곧 도착합니다 May 16, 2025 at 5:47 AM May 16, 2025 at 5:47 AM, Zagyva Tamás : Jó reggelt Poron katód oldalon bent áll a területen két AVG.Az egyik hibába áll és a másikat akadályozza. May 16, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.16 Time:06:00~18:00 1. BAEK HOJONG 백호종PM Köszönöm szépen May 16, 2025 at 11:47 AM, Zagyva Tamás : Poron katód 3-on megállt a robot.Az ütközőjét neki nyomta a lépcsőnek és megállt May 16, 2025 at 11:50 AM, Viczai Tamás : Megyünk May 16, 2025 at 1:25 PM, Yoon : @Sazzad Bhai SKon plz check the my email and follow our request. @윤경환 제가 방금 메일 전달드렸는데 해당 내용 참조하시여 gf로 출고요청해주시기 바랍니다 May 16, 2025 at 1:26 PM, Sazzad Bhai SKon : Received, we'll proceed it on order. Thank you May 16, 2025 at 1:26 PM, Yoon : thanks for your cooperation May 16, 2025 at 1:29 PM, Sazzad Bhai SKon : Hello manager, M01 and M02 is set as In port. Only M03 is out port. So, transfer is possible only for M03. May 16, 2025 at 1:35 PM, 윤경환 : We need 112-00242A 15plt in 1210 stock. May 16, 2025 at 1:35 PM, Sazzad Bhai SKon : Checking May 16, 2025 at 1:53 PM, duzzaman Md (MCS) : Already sent to M01/M02/M03 Ports Thank you May 16, 2025 at 1:55 PM, 윤경환 : Thank you.👍 May 16, 2025 at 2:00 PM, 윤경환 : And 112-00247 7plt in 1210 Stock. May 16, 2025 at 2:03 PM, duzzaman Md (MCS) : Already created the transfer order for 7plt. Thank you May 16, 2025 at 2:34 PM, Kőszegi Bence Csaba : Sziasztok! Tudtok nekem abban segíteni hogy a fóliaraktár betárolásnál a 2-es raktár gépén nem tudunk bejelentkezni? May 16, 2025 at 2:35 PM, Zagyva Tamás : Poron katód oldalon az airshowerben megállt a robot May 16, 2025 at 2:36 PM, Farkas Tamàs : Nemsokára megyek May 16, 2025 at 2:36 PM, Farkas Tamàs : Megyek May 16, 2025 at 3:00 PM, Farkas Tamàs : Kész May 16, 2025 at 3:00 PM, Farkas Tamàs : Kész May 16, 2025 at 3:01 PM, Zagyva Tamás : Köszi May 16, 2025 at 3:53 PM, Kim Dongju(김동주)_FA : This message was deleted. May 16, 2025 at 3:54 PM, Kim Dongju(김동주)_FA : 음극 분체창고 정상화 완료 했습니다. 지금 시간부로 분체 창고자재 입출고 하셔도 됩니다. 금일 도와주신 모든분들 감사합니다.^^ May 16, 2025 at 4:03 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 16, 2025 at 4:26 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten kérek segítséget! RTV run time over alarm May 16, 2025 at 4:27 PM, Molnár Ferenc : RTV-CV01 May 16, 2025 at 4:43 PM, Farkas Tamàs : Fenn áll még a hiba? May 16, 2025 at 4:55 PM, Kim Dongju(김동주)_FA : It's being checked now. You don't have to come here. May 16, 2025 at 4:56 PM, Farkas Tamàs : Ok, thank you May 16, 2025 at 5:27 PM, Powder tréner : Hali a por Katod oldalon az Air Showerben ragadt az AGV nem jön ki megnéznétek May 16, 2025 at 5:28 PM, Farkas Tamàs : Megyek May 16, 2025 at 5:58 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 16, 2025 at 6:00 PM, Horváth Tamás : Jo estét poron katód oldalt próbléma van a robottal May 16, 2025 at 6:01 PM, Horváth Tamás : Bent a termeléseben. May 16, 2025 at 6:01 PM, Dániel Hufnágel : Szia jó estét! Üres paletát kell csak kivenni a portról! May 16, 2025 at 6:02 PM, Horváth Tamás : Ok. Nézem May 16, 2025 at 6:10 PM, Horváth Tamás : Kiszedtük de nem mozdul az AGV May 16, 2025 at 6:12 PM, Dániel Hufnágel : Egy pillanat May 16, 2025 at 6:21 PM, Horváth Tamás : Elindultak May 16, 2025 at 7:08 PM, Horváth Tamás : Poron. Katód oldalt beragadt az AGV az Air showerbe. May 16, 2025 at 7:10 PM, Szabadi Miki : Nemsoká megyünk May 16, 2025 at 8:16 PM, Horváth Tamás : Megint megállr az AGV bent a területen. May 16, 2025 at 8:16 PM, Horváth Tamás : *Poron May 16, 2025 at 8:21 PM, Oláh András : Nemsokára érkezünk May 16, 2025 at 8:27 PM, Janos R. MX SL : Ez megint húzós éjszaka lesz a poron :/ May 16, 2025 at 8:30 PM, Janos R. MX SL : Cathode #2 sor megint a határon mozog ha egyszer is elcsúszunk megállitjuk a Coatingot May 16, 2025 at 9:15 PM, Varga Zoltán : Sziasztok katód #3-nál AGV #3 nem teszi le az anyagot a helyére, nézzétek meg légyszi May 16, 2025 at 9:16 PM, Szabadi Miki : Megyünk 😅 May 16, 2025 at 10:22 PM, Varga Zoltán : Hello we would like to request 10 palletts Umicore 111-00169A Thank you @Mohammad Amir May 16, 2025 at 10:22 PM, Mohammad Amir : Hello, Working on it. Thank you very much! May 16, 2025 at 10:27 PM, Mohammad Amir : I have transferred all the requested materials. ✅ Please collect it from the E0CNVC12_P07. Feel free to contact me again if you need any further assistance. Thank you very much! May 17, 2025 at 12:27 AM May 17, 2025 at 12:27 AM, Varga Zoltán : Sziasztok AGV nem veszi ki az anyagot a raktárból nézzétek meg légyszi köszönöm May 17, 2025 at 12:27 AM, Oláh András : 😱 Már rohanunk is May 17, 2025 at 2:27 AM, Varga Zoltán : Raktár előtt megállt AGV nézzétek meg légyszi May 17, 2025 at 2:30 AM, Szabadi Miki : Liftre várunk megyünk May 17, 2025 at 6:20 AM, Rózsavölgyi Attila : Jó regelt a por katod oldali raktár megált meg nézitek köszi May 17, 2025 at 6:21 AM, Farkas Tamàs : Megyünk May 17, 2025 at 6:32 AM, Marsi Gábor : Kész May 17, 2025 at 6:59 AM, Baek Hojong(백호종)FA : Day shift 05.17 06:00-18:00 Baek hojong Elec Cho Sung Jun Assem GF CHOI Myoungwoon Assem 1F Kim jeong hul May 17, 2025 at 8:29 AM, Powder tréner : Hali Por Katod oldalon az Air Showerben megált az AGV megnézitek ? May 17, 2025 at 8:30 AM, Farkas Tamàs : Megyünk May 17, 2025 at 8:37 AM, Farkas Tamàs : Kész May 17, 2025 at 9:34 AM, 장영환(Younghwan Chang) : 양극 분체실 안에 AGV 멈춰있는데 확인 좀 부탁드립니다 May 17, 2025 at 9:35 AM, Baek Hojong(백호종)FA : 갈께요 May 17, 2025 at 9:37 AM, Farkas Tamàs : Done May 17, 2025 at 9:38 AM, Baek Hojong(백호종)FA : Thanks May 17, 2025 at 11:52 AM, Zagyva Tamás : Poron katód oldalon megállt az AGV és nem tudunk tölteni.Megnéznétek?Köszi May 17, 2025 at 11:52 AM, Marsi Gábor : Megyünk May 17, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs, Novák Károly Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 17, 2025 at 6:05 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 17, 2025 at 9:26 PM, Varga Zoltán : Sziasztok poron katód oldalon AGV #2 megállt az air showernél nézzétek meg légyszi May 17, 2025 at 9:27 PM, Szabadi Miki : Okés megyünk nemsoká May 17, 2025 at 10:17 PM, Horváth Tamás : Sziasztok megáll az AGV katód poron May 17, 2025 at 10:17 PM, Horváth Tamás : *megállt May 17, 2025 at 10:17 PM, Oláh András : Mindjárt megyünk vissza May 18, 2025 at 6:23 AM May 18, 2025 at 6:23 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.18 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assey GF OH Eunhyang 1F Kim Jongwon May 18, 2025 at 6:26 AM, duzzaman Md (MCS) : @FA GOOD MORNING. Please check E0CNVA12_P01 Data loss error. Thanks May 18, 2025 at 6:27 AM, Zagyva Tamás : Sziasztok Poron anód oldalon az alapanyag raktár F0198 CV02-114 lost data alarm hibába áll.Kétszer újra indítottam,de vissza áll hibára.Meg tudnátok nézni? May 18, 2025 at 6:27 AM, Farkas Tamàs : Szia Nézem May 18, 2025 at 6:29 AM, Zagyva Tamás : Meg majd van 3 raklap amit manuálisan le kellene venni,mert ezek még a javítás után kikért raktártesztelős paletták asszem May 18, 2025 at 6:30 AM, Farkas Tamàs : Rendben, megyünk May 18, 2025 at 8:33 AM, duzzaman Md (MCS) : @FA Please check E0CNVA12_RTV01 Its OOS.Also the STK AN ports are OOS there. Thanks May 18, 2025 at 8:34 AM, Farkas Tamàs : We are looking for a PLC Technician. May 18, 2025 at 11:39 AM, KIM SEYEON [김세연]_FA : @ELECTRODE SHIFT LEADER is there any production plan today? anode side May 18, 2025 at 11:50 AM, Zagyva Tamás : Yes.Powder now anode 3,anode 4 May 18, 2025 at 2:50 PM, Zagyva Tamás : Poron az anód oldalon hívjuk az anyagot,de nem jön ki a raktárból.Rá tudtok nézni? May 18, 2025 at 2:51 PM, Farkas Tamàs : Nézem May 18, 2025 at 2:51 PM, Zagyva Tamás : Anód 3-ra kellene May 18, 2025 at 2:52 PM, Zagyva Tamás : Csináltunk egy törlés/újrahívást de úgy se jó May 18, 2025 at 3:00 PM, Farkas Tamàs : @duzzaman Md (MCS) please help. E1PLA031_P01 and E1PLA031_P02 are requesting the material but the cranes are not bringing it. What's wrong? May 18, 2025 at 3:19 PM, duzzaman Md (MCS) : For E1PLA031 The previous carrier PS112-2502120119 was removed from E0CNVA12_P07. Did you remove it manually ? May 18, 2025 at 3:23 PM, Farkas Tamàs : Yes May 18, 2025 at 3:23 PM, Farkas Tamàs : There was a manual download this morning due to an error. May 18, 2025 at 3:25 PM, duzzaman Md (MCS) : Please raise LR now May 18, 2025 at 3:27 PM, Farkas Tamàs : Ok May 18, 2025 at 3:28 PM, duzzaman Md (MCS) : Agv has departed already. May 18, 2025 at 3:30 PM, Farkas Tamàs : Yes, AGV finishes then we try again May 18, 2025 at 3:30 PM, Sazzad Bhai SKon : In this case please inform MCS to delete existing jobs. Otherwise new LR will not work May 18, 2025 at 3:31 PM, Farkas Tamàs : Ok May 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13+1 Overtime Overtime (1): Denkó János Sick (2):Kiss Balázs, Magyar Balázs Holiday (0):- Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Novák Károly Modul(3): Martina Dávid, Nagy Gábor, Denkó János May 18, 2025 at 6:03 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 18, 2025 at 7:04 PM, Varga Zoltán : Sziasztok alapanyag lett kérve anód oldalon de nem hozta ki a raktárból teljesen. A szállítószag nem hozza ki. Megnéznétek légyszi? Köszönöm May 18, 2025 at 7:04 PM, Oláh András : Már a liftben vagyunk May 18, 2025 at 10:52 PM, Horváth Tamás : Anódon az AGV megállt fent a poron. May 18, 2025 at 10:55 PM, Oláh András : Megyünk May 19, 2025 at 6:17 AM May 19, 2025 at 6:17 AM, Powder tréner invited Nazirov Eldar. May 19, 2025 at 7:12 AM, 동현 invited 박시우. May 19, 2025 at 1:48 PM, Molnár Ferenc : Hello! Elektróda por raktár földszinten az anód oldalon nem megy a stocker #3. Hibakódja: 145 load size information error May 19, 2025 at 5:55 PM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.19 "B" műszak, 11+1/12+1 Tech, 1Sl Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Sup May 19, 2025 at 11:22 PM, Powder tréner invited Kokhan Yurii. May 19, 2025 at 11:25 PM, Kokhan Yurii : Sziasztok! A Poron kátod oldalon AGV megált. Nézzétek még. Köszönöm May 19, 2025 at 11:30 PM, Szücs Géza FT-B : @Pálosi Róbert @Rácz Dániel / FA valaki megnézi légyszives? May 20, 2025 at 12:04 AM May 20, 2025 at 12:04 AM, Rácz Dániel / FA : Itt vagyuno May 20, 2025 at 12:31 AM, Rácz Dániel / FA : Kész May 20, 2025 at 12:42 AM, Kokhan Yurii : Köszönöm May 20, 2025 at 1:45 AM, Powder tréner : Hali a Por Katod oldalon az alapanyag nem jön le a RTV-röl Nézétek meg a hiba [CV13-101] Data Mismatch error. Köszi May 20, 2025 at 1:51 AM, Rácz Dániel / FA : Az RTV után nincs raklap igaz ? May 20, 2025 at 1:51 AM, Szücs Géza FT-B : @Pálosi Róbert nézd meg légyszives May 20, 2025 at 1:52 AM, Pálosi Róbert : Megyek May 20, 2025 at 1:53 AM, Powder tréner : Nincs azt a paletát elvite a AGV csak akövetkezö paleta marat rajta az RTV-n May 20, 2025 at 1:53 AM, Rácz Dániel / FA : Akkor törlöm az adatot May 20, 2025 at 1:54 AM, Rácz Dániel / FA : Újraindítjátok a konvejort ? May 20, 2025 at 1:55 AM, Powder tréner : Pill May 20, 2025 at 1:56 AM, Rácz Dániel / FA : Várjatok az adatot elírtam May 20, 2025 at 1:56 AM, Rácz Dániel / FA : PS111-2501230172 May 20, 2025 at 1:57 AM, Powder tréner : Igen ez a paleta száma May 20, 2025 at 1:58 AM, Rácz Dániel / FA : Most reset start May 20, 2025 at 2:00 AM, Powder tréner : Okés müködik May 20, 2025 at 2:00 AM, Rácz Dániel / FA : Köszi May 20, 2025 at 2:00 AM, Pálosi Róbert : Akkor ne menjek? May 20, 2025 at 2:03 AM, Powder tréner : Csak egyik AGV sem akarja elvini a paleta alapanyagot a termelésbe May 20, 2025 at 6:50 AM, Farkas Tamàs : @Mohammad Amir please help. CA Powder E1PLC021_P01 and E1PLC021_P02 are requested, but the warehouse does not provide the material. May 20, 2025 at 6:51 AM, Mohammad Amir : Good morning, Checking! May 20, 2025 at 6:53 AM, Mohammad Amir : Please press Load Request again. Thank you very much! May 20, 2025 at 6:53 AM, Farkas Tamàs : Thank you very much May 20, 2025 at 6:54 AM, Mohammad Amir : You are welcome! May 20, 2025 at 6:56 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.20 Time:06:00~18:00 1. Baek Hojong 2. Lee Jubing Köszönöm szépen May 20, 2025 at 7:02 AM, Farkas Tamàs : Sziasztok Ca 2-es sorra kérjetek újra anyagog. Köszönöm May 20, 2025 at 11:14 AM, adambenczik : Sziasztok. Anód raktárban áll egy AGV anyaggal. Eredetileg az 1-es sorra akarta vinni, de ott már nincs Load Request. Mi legyen vele? Kéritek még? May 20, 2025 at 11:22 AM, gutenkunstabelzoltan : Nyomnak req-et May 20, 2025 at 11:23 AM, adambenczik : Csinálja is May 20, 2025 at 11:29 AM, gutenkunstabelzoltan : Kesz May 20, 2025 at 11:33 AM, Farkas Tamàs : please help AN POWDER AGV does not carry the material E1PLA031_P02 May 20, 2025 at 11:45 AM, Farkas Tamàs : I'm going to look. May 20, 2025 at 11:57 AM, Farkas Tamàs : the AGV did not move. I deleted the task and gave it to another AGV. This does not remove the pallet from the C/V either. May 20, 2025 at 11:58 AM, Mohammad Amir : I am checking May 20, 2025 at 11:59 AM, Farkas Tamàs : Ok, thank you May 20, 2025 at 12:05 PM, Mohammad Amir : As I checked, Now AGV#3 has been assigned at 11:55. However it still went into Idle state and not moving. Everything is good from MCS RTD side ✅. @ACS Could you please check this issue after assignment,AGVs (E0PGVA11_VC03 and VC01 ) are going into Idle state and not delivering Powder materials. Thank you very much! May 20, 2025 at 12:12 PM, Farkas Tamàs : Ok, solved. Thank you very much! May 20, 2025 at 12:13 PM, Mohammad Amir : You are welcome! May 20, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.20. "B" műszak, 12+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(0): Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(5): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromis May 21, 2025 at 1:46 AM May 21, 2025 at 1:46 AM, Varga Zoltán : Sziasztok poron anód air showerben megállt az #1 AGV nézzétek meg légyszi köszönöm May 21, 2025 at 1:53 AM, Szücs Géza FT-B : @Rácz Dániel / FA please a kuksing meg tháj May 21, 2025 at 2:15 AM, Rácz Dániel / FA : Kèsy May 21, 2025 at 2:16 AM, Varga Zoltán : Köszönöm May 21, 2025 at 2:51 AM, Muneeb Ur Rehman left this chatroom. May 21, 2025 at 4:24 AM, Varga Zoltán : Por anód raktárból nem veszi ki az anyagot az AGV #2. Nézzétek meg légyszi May 21, 2025 at 4:28 AM, Czeilinger Krisztián : Úton vagyunk. May 21, 2025 at 4:51 AM, Pálosi Róbert : Kész May 21, 2025 at 4:54 AM, Kokhan Yurii : Köszönjük May 21, 2025 at 4:57 AM, Pálosi Róbert : 🖖 May 21, 2025 at 6:05 AM, Zagyva Tamás : Sziasztok Poron anód pldalon megálltak a robotok.Megnézitek?Köszi May 21, 2025 at 6:14 AM, Farkas Tamàs : Megyünk May 21, 2025 at 6:32 AM, Marsi Gábor : Kész May 21, 2025 at 6:36 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.21 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assy GF Ca NC OH Eunhyang GF Ca NC Kim Jongwon May 21, 2025 at 8:56 AM, Zagyva Tamás : Poron anód oldalon nem adja ki a raktár az anyagot.A raktár hibába áll.Ha újraindítjuk akkor megint kiáll hibára.Meg kellene nézni May 21, 2025 at 8:59 AM, Marsi Gábor : Megyek May 21, 2025 at 9:11 AM, Marsi Gábor : Kész May 21, 2025 at 9:19 AM, Zagyva Tamás : Köszönöm May 21, 2025 at 10:56 AM, Zagyva Tamás : 2 AGV össze akadt a poron az anód 4-nél.Kellene segítség May 21, 2025 at 10:57 AM, Marsi Gábor : Nézem May 21, 2025 at 3:25 PM, Zagyva Tamás : Poron anód oldalon összekoccant a két AGV.Még jó hogy volt rajtuk ütköző.Meg tudnátok nézni May 21, 2025 at 3:25 PM, Zagyva Tamás : ? May 21, 2025 at 3:26 PM, Marsi Gábor : Igen May 21, 2025 at 3:26 PM, Marsi Gábor : Megyünk May 21, 2025 at 7:14 PM, Varga Zoltán : Sziasztok poron anód raktár nem adja ki az anyagot, visít mert hibára állt megnéznétek légyszives? May 21, 2025 at 7:14 PM, Dániel Hufnágel : Igen pillanat és ott May 21, 2025 at 9:33 PM, Varga Zoltán : Sziasztok poron anód raktár előtt megálltak a AGV nézzétek meg légyszi köszönöm May 21, 2025 at 9:37 PM, Dániel Hufnágel : Megyünk May 21, 2025 at 9:53 PM, Dániel Hufnágel : @Shakir (MCS) Good evening ! Can you please make order anode side 1F E0CNVA12_P07 port material? May 21, 2025 at 10:04 PM, Shakir (MCS) : ✅ Done Thank you May 21, 2025 at 10:11 PM, Varga Zoltán : Sziasztok poron anód raktár előtt megállt AGV nem veszi fel az anyagot nézzétek meg légyszi köszönöm May 21, 2025 at 10:38 PM, Oláh András : Megyünk May 21, 2025 at 10:44 PM, Horváth Tamás : Hello szia. Az AGV megállt az anód raktárnál a poron. Nem akarja fel venni a kiadott anyagot a raktárból May 21, 2025 at 10:44 PM, Oláh András : Még mindig megyünk 😁 May 22, 2025 at 12:22 AM May 22, 2025 at 12:22 AM, Varga Zoltán : Megint ugyanaz, nézzétek meg légyszi May 22, 2025 at 1:25 AM, Varga Zoltán : AGV #2 anód #4-nél nem teszi le az anyagot nézzétek meg légyszi ha van rá kapacitásotok köszönöm May 22, 2025 at 7:57 AM, Powder tréner : Halia az Anodon megált az AGV robot megnézitek ? May 22, 2025 at 7:59 AM, Farkas Tamàs : Megyek May 22, 2025 at 1:45 PM, Zagyva Tamás : Poron Katód oldalon lerobbantak a robotok a raktárnál.Meg tudjátok nézni? May 22, 2025 at 2:01 PM, Farkas Tamàs : Megyek May 22, 2025 at 2:03 PM, Zagyva Tamás : Valaki megcsinálta May 22, 2025 at 2:03 PM, Farkas Tamàs : Ok köszi May 22, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1): Magyar Balázs, Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 22, 2025 at 11:48 PM, Horváth Tamás : Hello Katód oldalt poron a munkaterületen megállt az AGV. May 23, 2025 at 1:42 AM May 23, 2025 at 1:42 AM, Horváth Tamás : Sziasztok ismételten megállt. May 23, 2025 at 1:48 AM, Horváth Tamás : Ok életre kelltek. Nem kell segítség May 23, 2025 at 1:48 AM, Horváth Tamás : Nem adta ki a raktár az anyagot. A betöltönél ki reseteltük újra hívtuk és megy. May 23, 2025 at 6:10 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 3 Overtime ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 23, 2025 at 8:15 AM, duzzaman Md (MCS) : @FA Please check E0CNVC12_P07 LIGHIT CURTAIN ALARM Thank you May 23, 2025 at 9:15 AM, Nazirov Eldar : Sziasztok szeretnék kérni segítsék porrá katód raktár Nem adja ki az anyagot ( el akad útközbe darus villan) köszönöm May 23, 2025 at 6:03 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten katód oldalon nem viszi át az RTV ről az anyagot a szalagra. Hibakód: F0949 Tray Data Mismatch Error May 23, 2025 at 6:05 PM, Szücs Géza FT-B : szia, mennek a srácok May 23, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 11+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(0): Translater: -- --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Hara May 23, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 10+1+1/12+1 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(1): Böröczki Balázs Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Harasztia Zoltán -------------- May 23, 2025 at 6:36 PM, Rácz Dániel / FA : Itt vagyunk May 23, 2025 at 6:53 PM, Molnár Ferenc : Én már majdnem otthon. Sikerült megjavitani? May 23, 2025 at 9:46 PM, Rácz Dániel / FA : Szia, igen. Jó pihit May 24, 2025 at 6:01 AM May 24, 2025 at 6:01 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime, 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 24, 2025 at 9:19 AM, duzzaman Md (MCS) : @FA Please check E0STKA13_P02 Tray abnormal error Thank you May 24, 2025 at 9:19 AM, Molnár Ferenc : Sziasztok! Elektróda por raktár földszinten anód oldalon megállt az automata raktár. Abnormal Position May 24, 2025 at 9:22 AM, Mr.Miti (미티) FA : Mindjárt megyünk. May 24, 2025 at 9:25 AM, Mr.Miti (미티) FA : Látom már nem kell. (thumbsup) May 24, 2025 at 12:09 PM, duzzaman Md (MCS) : @FA Kindly check E0STKA52_P01_OP01, its OOS Thank you! May 24, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23á4. "B" műszak, 12+2/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(0): Shift Change(0): Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(2): 방혁_이반차 (Bang Hyuk May 24, 2025 at 6:31 PM, Varga Zoltán : Sziasztok poron katód #2-nél AGV #2 megállt nézzétek meg légyszíves köszönöm May 24, 2025 at 6:38 PM, Szücs Géza FT-B : megyünk May 24, 2025 at 7:03 PM, Szücs Géza FT-B : kész May 24, 2025 at 9:00 PM, Varga Zoltán : Sziasztok poron katód #2-nél agv nem teljesen rakta be az anyagot a helyére, egy kicsit előbb rakta le mint kellett volna. AGV működését nem befolyásolta May 24, 2025 at 9:35 PM, Rácz Dániel / FA : Jövök May 24, 2025 at 9:52 PM, Rácz Dániel / FA : Kész May 24, 2025 at 10:55 PM, Varga Zoltán : Sziasztok poron anód air showerben AGV #1 megállt nézzétek meg légyszi May 24, 2025 at 11:49 PM, Kokhan Yurii : Sziasztok, Meg mindig áll May 24, 2025 at 11:50 PM, Denkó Jani (F.A.) : @Pálosi Róbert @Czeilinger Krisztián May 24, 2025 at 11:51 PM, Rácz Dániel / FA : Ne menjetek May 24, 2025 at 11:51 PM, Pálosi Róbert : Megyünk May 24, 2025 at 11:51 PM, Rácz Dániel / FA : Gyertek engem váltani megyek én May 24, 2025 at 11:51 PM, Rácz Dániel / FA : Ne menjetek May 24, 2025 at 11:51 PM, Pálosi Róbert : Oks May 24, 2025 at 11:53 PM, Rácz Dániel / FA : Indulok, May 25, 2025 at 12:15 AM May 25, 2025 at 12:15 AM, Rácz Dániel / FA : Itt vagyunk May 25, 2025 at 12:21 AM, Rácz Dániel / FA : Kész May 25, 2025 at 2:54 AM, Kokhan Yurii : Sziasztok, katod 2sor, 2AGV Megál, nézzétek meg légyszíves. Köszönöm May 25, 2025 at 2:55 AM, Czeilinger Krisztián : Megyek May 25, 2025 at 2:56 AM, Rácz Dániel / FA : Ha hó ne menj megyek én gyertek váltani engem May 25, 2025 at 2:56 AM, Czeilinger Krisztián : Oke May 25, 2025 at 2:56 AM, Rácz Dániel / FA : Köszi May 25, 2025 at 3:06 AM, Rácz Dániel / FA : Jövök May 25, 2025 at 3:54 AM, Kokhan Yurii : Sziasztok, Katod 2 nem jó helyre került a paletta. Nézzétek meg légyszíves May 25, 2025 at 3:54 AM, Rácz Dániel / FA : Megyek leváltom a kollégákat ők fognak érkezni nem sokára May 25, 2025 at 3:55 AM, Rácz Dániel / FA : @Czeilinger Krisztián @Pálosi Róbert Gyertek ki, nézzétek meg. Megyek be elektródára. May 25, 2025 at 3:56 AM, Czeilinger Krisztián : Rendben May 25, 2025 at 4:50 AM, Rácz Dániel / FA : Köszönöm 🤗 May 25, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) Technician, 1 Sl, 1 Overtime 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 25, 2025 at 8:30 AM, Mohammad Amir : @FA Please check E0STKC13_C01 there is Hoist Time over error. Thank you! May 25, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.25. "B" műszak, 12+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(0): Sick(0): Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Harasztia Z May 25, 2025 at 7:30 PM, Varga Tamás Powder : Sziasztok a poron katod oldalt a termelésben megállt az AGV Hiba: Motor control fault AGV controller Megtudnátok nézni? Köszönöm May 25, 2025 at 7:30 PM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Megnéznétek ? May 25, 2025 at 7:30 PM, Pálosi Róbert : Megyünk May 25, 2025 at 7:31 PM, Szücs Géza FT-B : @Varga Tamás Powder mind2 oldalon van jelenleg porbetöltés? May 25, 2025 at 7:31 PM, Varga Tamás Powder : Igen May 25, 2025 at 7:32 PM, Varga Tamás Powder : @Szücs Géza FT-B Anod 1,2 meg katod 1,2 megy May 25, 2025 at 7:32 PM, Szücs Géza FT-B : köszönöm szépen May 25, 2025 at 10:35 PM, (Unknown) left this chatroom. May 25, 2025 at 11:06 PM, Szücs Géza FT-B : AGV CA#1 ismét jó, üzemel May 25, 2025 at 11:09 PM, Rácz Dániel / FA : @baganaa May 25, 2025 at 11:15 PM, Szücs Géza FT-B : az kiaz? éshol? May 25, 2025 at 11:16 PM, Rácz Dániel / FA : Minden honnan csak kilép 😌 May 25, 2025 at 11:18 PM, Szücs Géza FT-B : a barátod volt? May 25, 2025 at 11:18 PM, Szücs Géza FT-B : Photo May 25, 2025 at 11:24 PM, Rácz Dániel / FA : Ahhh May 25, 2025 at 11:25 PM, Rácz Dániel / FA : Photo May 25, 2025 at 11:26 PM, 방혁 PM(Bang.Hyuk) FA : Always May 25, 2025 at 11:27 PM, Rácz Dániel / FA : Photo May 26, 2025 at 2:21 AM May 26, 2025 at 2:21 AM, Varga Tamás Powder : Sziasztok a poron az anod raktárban az AGV kiállt hibára. Nem tudom a hibát se törölni. Megnéznétek? Köszönöm Hiba: no scan from front scanner May 26, 2025 at 2:28 AM, Szücs Géza FT-B : @Pálosi Róbert May 26, 2025 at 2:35 AM, Rácz Dániel / FA : @Pálosi Róbert nézd meg kérlek May 26, 2025 at 2:37 AM, Denkó Jani (F.A.) : @Pálosi Róbert jelentkezz May 26, 2025 at 2:37 AM, Pálosi Róbert : Megyek May 26, 2025 at 2:37 AM, Rácz Dániel / FA : Köszi May 26, 2025 at 2:38 AM, Varga Tamás Powder : Most már más a hiba: position not initialized May 26, 2025 at 3:11 AM, Pálosi Róbert : Kész May 26, 2025 at 3:15 AM, Varga Tamás Powder : Most meg nem veszi le az anyagot az anod raktárban😡 May 26, 2025 at 3:15 AM, Varga Tamás Powder : Megtudja valaki nézni? Köszönöm May 26, 2025 at 3:18 AM, Varga Tamás Powder : Megoldottam 😁 nem kell jönni😉 May 26, 2025 at 3:21 AM, Rácz Dániel / FA : Köszi May 26, 2025 at 6:08 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Nagy Zsolt, Kasztel Balázs Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(4): GF: Novák Zoltán, Zsurbej Zsolt 1F: Novák Károly, Kovács Szabolcs, Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs May 26, 2025 at 6:52 AM, duzzaman Md (MCS) : @FA Please check E0CNVC12_P07 LIGHIT CURTAIN ALARM Thank you May 26, 2025 at 6:53 AM, Horváth Tamás : Sziasztok Katódon probléma van a robottal a poron May 26, 2025 at 6:55 AM, Varga Zoltán : Nem veszi ki az anyagot a raktárból AGV #2 May 26, 2025 at 6:55 AM, Oláh András : Sztrájkol? 😁 Nemsokára megyünk May 26, 2025 at 7:51 AM, Horváth Tamás : Katód oldalra a porra kérnék segítséget May 26, 2025 at 7:51 AM, Horváth Tamás : Bent a területen May 26, 2025 at 7:57 AM, Oláh András : Megyünk May 26, 2025 at 8:08 AM, Oláh András : @Horváth Tamás a 2es sor 2es portján ott az anyag és oda vinné az agv May 26, 2025 at 8:08 AM, Oláh András : Valaki be tudja tölteni azt a port? May 26, 2025 at 8:14 AM, Horváth Tamás : Ohh mindjárt May 26, 2025 at 9:01 AM, Varga Zoltán : Good morning.Is there any M36H in the automatic warehouse? 112-00237A We pushed LR button and blue light is blinking @duzzaman Md (MCS) Thank you May 26, 2025 at 9:03 AM, Molnár Ferenc : I handed over 83 plt BTR to you this morning from the automated warehouse. May 26, 2025 at 9:09 AM, Varga Zoltán : We dont get the materials. I dont know why please help somebody May 26, 2025 at 9:10 AM, duzzaman Md (MCS) : There are 110 Anode material available in warehouse May 26, 2025 at 9:13 AM, Horváth Tamás : The boys ask for the material, but the warehouse doesn't move. May 26, 2025 at 9:14 AM, Sazzad Bhai SKon : There is only 1 current job. May 26, 2025 at 9:15 AM, Sazzad Bhai SKon : Since today morning there was only 15 pallet transferred to pwd mixer May 26, 2025 at 9:18 AM, Varga Zoltán : We need this material 112-00237A When we pushed LR button blue light blinking and materials dont come out from automatic warehouse May 26, 2025 at 9:19 AM, Sazzad Bhai SKon : Please tell me the machine name, is it E1PLA021_P02? May 26, 2025 at 9:20 AM, Horváth Tamás : E1PLA021_P01 May 26, 2025 at 9:21 AM, Horváth Tamás : E1PLA011_P01 May 26, 2025 at 9:22 AM, Sazzad Bhai SKon : I see, it shows material definition id is invalid May 26, 2025 at 9:23 AM, Horváth Tamás : What can we do with it? May 26, 2025 at 9:23 AM, Sazzad Bhai SKon : checking May 26, 2025 at 9:24 AM, Horváth Tamás : Thanks May 26, 2025 at 9:39 AM, Sazzad Bhai SKon : Please press LR again May 26, 2025 at 9:44 AM, Varga Zoltán : We did it but nothing changed. Blue light blinking May 26, 2025 at 9:49 AM, Sazzad Bhai SKon : The problem is material name started with SP112 instead on PS112 May 26, 2025 at 9:50 AM, Janos R. MX SL : @배광근 (Ben) could you help us? May 26, 2025 at 9:50 AM, Sazzad Bhai SKon : RTD only allows material staring with PS112-... So please change the material name May 26, 2025 at 9:55 AM, 이영혁 paul : RTD에서 material definition id를 업데이트 하는 케리어는 P로 시작하는것으로 구분 합니다 SP로 생성된 케리어는 어떻게 생성된것인지 확인 부탁드립니다 May 26, 2025 at 9:57 AM, 배광근 (Ben) : Yes it is SP112 May 26, 2025 at 9:58 AM, 배광근 (Ben) : The PLT ID for them has duplicated others, so i changed their PLT ID to SP112 May 26, 2025 at 9:59 AM, 이영혁 paul : sp로 시작하는 캐리어는 정보 업데이트가 안됩니다 May 26, 2025 at 10:00 AM, 이영혁 paul : 분체 케리어는 PS로 구분해서 정보가 업데이트 됩니다 May 26, 2025 at 10:02 AM, 김주연 : 피엠님, 현재 id 가 중복돼서 변경하셧가는걸까요? Dup 발생하면 old 캐리어를 출고하고, 그 다음에 신규 캐리어랑 old 캐리어 다시 읽혀서 입고하시면 됩니다. May 26, 2025 at 10:03 AM, 배광근 (Ben) : 네 맞습니다! 근데 중복 팔렛넘버는 wms에 입고 자체가 불가해서 앞 두자리만 변경했엇습니다 May 26, 2025 at 10:04 AM, 장영환(Younghwan Chang) : SP로 입고된 자재들이 반송 가능 대상으로 안뜨는 건가요..? May 26, 2025 at 10:04 AM, 김주연 : ㅠㅠ저희가 로직상 캐리어 아이디 앞 prefix 로 로직 설정이 되어있어서요, SP로 바뀐 것은 추후 관리가 어렵습니다. 네넵 맞습니다 May 26, 2025 at 10:05 AM, 배광근 (Ben) : 분체는 모두 앞자리가 PS되어야 자동화창고에서 출고 가능하다는 말씀이실까요..? May 26, 2025 at 10:05 AM, 김주연 : 피엠님 추가적으로, 중복 대상인 캐리어가 혹시 wms상에서도 출고가 불가했던 상황일까요? 불가한 상황이라면 이 부분은 FA에서 지원 가능합니다 May 26, 2025 at 10:06 AM, 김주연 : 넵 맞습니다. 기존부터 설정이 그렇습니다. May 26, 2025 at 10:06 AM, 장영환(Younghwan Chang) : WMS에서 SP로 출고해놓고 실물이 전부 자동화창고로 들어갔는데 저희쪽으로 안나오나 봅니다 May 26, 2025 at 10:06 AM, 배광근 (Ben) : 저희가 종종 새팔렛 작업 하면 SMP 또는 PLT 팔렛 아이디가 생성되는데, 이런게 생성된 건들은 자동화창고 사용이 불가할까요..? May 26, 2025 at 10:07 AM, 장영환(Younghwan Chang) : @배광근 (Ben) PM님 저희가 지금 생산중이라 계속 자재를 받아야 하는데 방법이 없을까요 May 26, 2025 at 10:10 AM, 배광근 (Ben) : @김주연 팔렛 아이디 변경된건 1F로 뺄 방법이 없을까요?? May 26, 2025 at 10:11 AM, 배광근 (Ben) : 만약 변경된 건 못뺀다면 오늘 정상적인 112-00237A 40여톤 들어오는데 이거 오면 드릴 수 있습니다 May 26, 2025 at 10:14 AM, 김주연 : RTD로 수동명령 내려서 출고 가능합니다. 자동반송만 안되는겁니다 May 26, 2025 at 10:25 AM, 주범진 : @김주연 피엠님 안녕하세요 유선으로 요청 드렸던 것처럼 1f 바닥으로 자재 내려놔주실 인원 지원 해주시면 감사드리겠습니다 May 26, 2025 at 10:26 AM, duzzaman Md (MCS) : @FA Please check E0STKC11 “Hoist driver error” Thanks May 26, 2025 at 10:27 AM, Sazzad Bhai SKon : Yes we can transfer manually May 26, 2025 at 10:28 AM, 주범진 : Thank you we are waiting at anode side May 26, 2025 at 10:29 AM, Sazzad Bhai SKon : How many Plates? We'll start transfer to CNV P07 May 26, 2025 at 10:30 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please support fa technicians for manual agv unloading May 26, 2025 at 10:30 AM, KIM SEYEON [김세연]_FA : @주범진 저희 쉬프트리더 daniel이 대응 하겠습니다. May 26, 2025 at 10:30 AM, 김주연 : I will send a list by email! May 26, 2025 at 10:31 AM, Dániel Hufnágel : On my way May 26, 2025 at 10:31 AM, Dániel Hufnágel : So for today we have to do powder manually? May 26, 2025 at 10:35 AM, 김주연 : @주범진 피엠님. 리스트 총 80PLT (base pallet 기준 수량) 공유받았습니다. 금일 전 수량 출고 예정이신가요? May 26, 2025 at 10:37 AM, KIM SEYEON [김세연]_FA : only 80 pallets the electrode wants. May 26, 2025 at 10:37 AM, Dániel Hufnágel : @Sazzad Bhai SKon please share me if you already release the pallets May 26, 2025 at 10:40 AM, duzzaman Md (MCS) : Will do May 26, 2025 at 10:47 AM, duzzaman Md (MCS) : Hey, I just got 10 released. Could you tell me how many you need for now ? May 26, 2025 at 10:49 AM, Dániel Hufnágel : As i saw it 80 May 26, 2025 at 10:50 AM, Dániel Hufnágel : But hope i am wrong(tearing) May 26, 2025 at 10:50 AM, Sazzad Bhai SKon : Hello Pm, E0CNVA12_P08 is in port. So we request to make it out port for the moment. May 26, 2025 at 10:57 AM, 주범진 : @KIM SEYEON [김세연]_FA @김주연 감사합니다 @Dániel Hufnágel @Sazzad Bhai SKon Can you take it out like this? Today 30, tomrrow 30, the day after tomorrow 20 It's because we don't have enough space to put the materials Thank you May 26, 2025 at 10:57 AM, 김주연 : This message was deleted. May 26, 2025 at 10:58 AM, Dániel Hufnágel : Guys slowly there, but we only have 3 technican for whole electrode side so please be patient! Thank you! May 26, 2025 at 11:05 AM, duzzaman Md (MCS) : We have created 30 for now, kindly let us know if you require more. We are always at your disposal. May 26, 2025 at 11:07 AM, Dániel Hufnágel : Technicans are slowly there around 10 minute May 26, 2025 at 11:07 AM, 주범진 : Thank you May 26, 2025 at 11:08 AM, Dániel Hufnágel : You are welcome May 26, 2025 at 11:47 AM, 주범진 : Can you arrange someone tomorrow morning 9am? This is for same thing_30plt May 26, 2025 at 11:47 AM, Sazzad Bhai SKon : We'll do it May 26, 2025 at 11:56 AM, 김주연 : @KIM SEYEON [김세연]_FA 피엠님 명일 일정 확인 부탁드립니다. May 26, 2025 at 1:27 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten katód oldalon megállt az automataraktár. Segítséget kérek. May 26, 2025 at 1:31 PM, 윤경환 : @KIM SEYEON [김세연]_FA 안녕하세요 피엠님 양극 자동화 창고 투입중인데 실 자재가 없는데, 센서 감지 되고 있습니다. 금일 양극재 음극재 자동화 투입할 양이 많습니다. 빠른 조치 부탁 드리겠습니다. May 26, 2025 at 1:44 PM, Jun(정우준)_SKOH FA : 안녕하세요, GF CA Powder RTV 인 것 같은데 현장에 FA 테크니션이 조치 중일까요?? May 26, 2025 at 1:45 PM, Dániel Hufnágel : They are still at 1F May 26, 2025 at 1:46 PM, Jun(정우준)_SKOH FA : This message was deleted. May 26, 2025 at 1:47 PM, Jun(정우준)_SKOH FA : ah okay, someone checking it!? May 26, 2025 at 1:48 PM, Dániel Hufnágel : They will as soon as they finish at 1F May 26, 2025 at 1:48 PM, Jun(정우준)_SKOH FA : okay thanks May 26, 2025 at 1:48 PM, Dániel Hufnágel : We can only do with this membership one by one all the errors May 26, 2025 at 1:48 PM, Dániel Hufnágel : Welcome May 26, 2025 at 2:23 PM, 주범진 : @Horváth Tamás @Varga Zoltán Hello In order to take out In order to take out the material（112-00237A), we need to get help from the fa team like today. 5/27(30plt） 5/28（20plt) Please keep that in mind as fa team can help us during 6~9am, so please take out that material during this time, and take out the others using agv in advance May 26, 2025 at 2:40 PM, Varga Zoltán : Okay thank you very much May 26, 2025 at 3:59 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon megállt az automata raktár. Pallette Abnormal Position Alarm hibakód van. Kérek segítséget May 26, 2025 at 4:00 PM, Oláh András : Megyünk May 26, 2025 at 4:01 PM, Horváth Tamás : Sziasztok Anód oldalt a poron megállt a robot May 26, 2025 at 4:02 PM, Szabadi Miki : Kértetek be még anyagot azon kivűl amit kivettünk ? May 26, 2025 at 4:05 PM, Varga Zoltán : Igen, é elakadt a AGV segítséget szeretnék kérni May 26, 2025 at 4:07 PM, Szabadi Miki : Úton May 26, 2025 at 6:21 PM, Baek Hojong(백호종)FA : Night shift FA Date: 2025.05.26 Time:18:00~06:00 Baek Hojong 백호종PM 1. Elec 송태용 (Song Taeyong) 2. Assy 1F 김종원 (Kim Jongwon) GF 오은향 (OH Eunhyang) May 26, 2025 at 6:56 PM, Zagyva Tamás : Poron katód oldalon megállt a raktárnál az AGV.Megnézitek? May 26, 2025 at 6:56 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a raktárban az anyagot nem vette le. Megtudnátok nézni? Köszönöm May 26, 2025 at 6:57 PM, Marsi Gábor : Megyek May 26, 2025 at 7:20 PM, Marsi Gábor : Kész May 26, 2025 at 8:11 PM, Rózsavölgyi Attila : Halli a Por katod oldalon a 2-és AGV megált az Air Sowerben és nem jönki nézzétek meg köszi May 26, 2025 at 8:44 PM, Zagyva Tamás : Poron katod oldalon megállt a porbetöltés,mert az air showerben áll a robot.Megnézitek? May 26, 2025 at 8:45 PM, Marsi Gábor : Úton May 26, 2025 at 8:46 PM, Zagyva Tamás : Okézsoké May 26, 2025 at 8:51 PM, Marsi Gábor : Kész May 27, 2025 at 6:00 AM May 27, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+2 overtime Overtime (2): Böröcz Tamás, Cehman Zsolt Sick (0):- Holiday (4): Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt, Martina Dávid Shift change(0): Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Cehman Zsolt Assembly(4): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Böröcz Tamás Modul(2): Nagy Gábor, Magyar Balázs May 27, 2025 at 6:22 AM, Varga Zoltán : Good morning. I would like to request other 30 paletts. 112-00237A @Sazzad Bhai SKon Thank you Segítséget szeretnék kérni a paletták kivételéhez. Köszönöm May 27, 2025 at 6:23 AM, duzzaman Md (MCS) : Will be done. May 27, 2025 at 6:24 AM, Oláh András : Mindjárt megyünk May 27, 2025 at 6:39 AM, duzzaman Md (MCS) : Materials has been released. Have a lovely day ahead. May 27, 2025 at 6:50 AM, Varga Zoltán : Thank you very much May 27, 2025 at 8:05 AM, Oláh András : @duzzaman Md (MCS) pls check LR at E1PLC021_P02 May 27, 2025 at 8:11 AM, Sazzad Bhai SKon : Last LR was at 4:33 May 27, 2025 at 8:11 AM, Oláh András : Can u delete it? May 27, 2025 at 8:12 AM, Sazzad Bhai SKon : Job completed at 4:51. So job doesn't exist anymore May 27, 2025 at 8:13 AM, Oláh András : But operators cant press LR again and acs shows "[33] LR another transport job" May 27, 2025 at 8:15 AM, Sazzad Bhai SKon : This message was deleted. May 27, 2025 at 8:16 AM, Sazzad Bhai SKon : There is job exist for P01 port. But for P02 , none May 27, 2025 at 8:26 AM, Oláh András : Port was in alarm, now everything works. And LR working too May 27, 2025 at 11:37 AM, Kőszegi Bence Csaba : Sziasztok! Fóliaraktár 1-es daru nem megy. Indítsátok el légyszi. Köszi May 27, 2025 at 2:04 PM, Varga Zoltán : Sziasztok poron katód oldalon AGV #3 szenzornál kiesett csavar és a burkolat néha a szenzor útjában van. Megnéznétek légyszi May 27, 2025 at 2:11 PM, Szabadi Miki : Megyünk May 27, 2025 at 8:25 PM, Zagyva Tamás : Poron katód raktárból nem jön ki az anyag,csak félig.Nézzétek meg lécci.Köszönöm May 27, 2025 at 8:26 PM, Marsi Gábor : Megyek May 27, 2025 at 8:33 PM, Marsi Gábor : Kész May 27, 2025 at 8:33 PM, Zagyva Tamás : Oké May 28, 2025 at 12:17 AM May 28, 2025 at 12:17 AM, Powder tréner : Poron az AGV nem veszi le paletát a szalag-rol meg nézitek May 28, 2025 at 12:18 AM, Marsi Gábor : Nézem May 28, 2025 at 12:19 AM, Marsi Gábor : Megyek May 28, 2025 at 12:24 AM, Marsi Gábor : Kész May 28, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 28, 2025 at 7:24 AM, Nazirov Eldar : Sziasztok kéne segítség be kell szedni anyák manuálisba köszönöm May 28, 2025 at 7:25 AM, Mr.Miti (미티) FA : Szia! Rendben nemsokára érkezünk. May 28, 2025 at 7:58 AM, Mr.Miti (미티) FA : Menni raklapot kértetek ki? May 28, 2025 at 8:16 AM, Nazirov Eldar : 15 May 28, 2025 at 8:16 AM, Mr.Miti (미티) FA : Utána tudnátok kérdezni mert mert csak kettő jött ki. May 28, 2025 at 8:17 AM, Mr.Miti (미티) FA : @Mohammad Amir Hello! Please check how many pallets there are that need to be removed manually. And if there are any, please send them to the ports. Thank you very much! May 28, 2025 at 8:18 AM, Mohammad Amir : Hello Could you please tell me which kind of pallet are you referring to and which area. Thank you very much! May 28, 2025 at 8:22 AM, Mr.Miti (미티) FA : @Mohammad Amir Anode side, 1st floor, continuation of these, which were put into storage with the wrong label. May 28, 2025 at 8:23 AM, Mohammad Amir : Sure , checking. Thank you! May 28, 2025 at 8:23 AM, Mr.Miti (미티) FA : Thank you! May 28, 2025 at 8:23 AM, Mr.Miti (미티) FA : (thumbsup) May 28, 2025 at 8:24 AM, Mohammad Amir : We have currently 98 of mentioned type Pallet . @Mr.Miti (미티) FA please let me know how much you would like to receive. Thank you very much! May 28, 2025 at 8:25 AM, Mr.Miti (미티) FA : A second pleas May 28, 2025 at 8:25 AM, Mr.Miti (미티) FA : @Balogh Ádám esetleg tudnátok ebben segíteni? Melyikeket és mennyit kell kivenni? May 28, 2025 at 8:30 AM, Balogh Ádám : Szia @Nazirov Eldar a poros, mindjart szólok neki. May 28, 2025 at 8:30 AM, Mr.Miti (미티) FA : Köszönöm szépen! May 28, 2025 at 8:40 AM, Nazirov Eldar : This message was deleted. May 28, 2025 at 8:40 AM, Nazirov Eldar : 112-00237A 15 paletta May 28, 2025 at 8:41 AM, Mr.Miti (미티) FA : @Mohammad Amir Please! May 28, 2025 at 8:41 AM, Mr.Miti (미티) FA : Köszönjük az infót! Ennyi lesz ma összesen? May 28, 2025 at 8:41 AM, Nazirov Eldar : Igen May 28, 2025 at 8:41 AM, Mohammad Amir : I am transferring. Thank you! May 28, 2025 at 8:41 AM, Nazirov Eldar : Nincs mit May 28, 2025 at 8:41 AM, Mr.Miti (미티) FA : Szuper köszönöm! May 28, 2025 at 9:21 AM, Mohammad Amir : Update :- All requested materials have been transferred successfully ✅ Feel free to contact me again if you need any further assistance. Thank you very much! May 28, 2025 at 10:24 AM, 주범진 : Hello @Horváth Tamás @Varga Zoltán @Nazirov Eldar @Dániel Hufnágel @Sazzad Bhai SKon Every80 plt were took out from warehouse? May 28, 2025 at 10:34 AM, Sazzad Bhai SKon : 15 was sent. We'll send 5 more? May 28, 2025 at 10:34 AM, 주범진 : Yes please May 28, 2025 at 10:35 AM, 주범진 : Plt number SP111_20plt May 28, 2025 at 10:48 AM, Sazzad Bhai SKon : Hello manager, as per from the list we received by email, there is no SP111 pallets. We have only SP112 May 28, 2025 at 10:50 AM, 주범진 : sorry， yes sp 112 May 28, 2025 at 10:51 AM, Sazzad Bhai SKon : Thank you we'll transfer May 28, 2025 at 11:03 AM, Mohammad Amir : Dear Manager, We have transferred the requested materials. ✅ Thank you very much! May 28, 2025 at 11:15 AM, Sazzad Bhai SKon : This was PS112 materials. Please use only SP112 materials May 28, 2025 at 11:21 AM, 주범진 : @Nazirov Eldar @Powder tréner Fa team are going to take 20plt out and put down the floor May 28, 2025 at 11:22 AM, 주범진 : This message was deleted. May 28, 2025 at 11:23 AM, 주범진 : Please register first and move inside May 28, 2025 at 11:29 AM, Nazirov Eldar : We just checked they were registered and we will use thank you May 28, 2025 at 11:50 AM, Sazzad Bhai SKon : 79 was transferred. SP112-2503120062 was not found in the warehouse May 28, 2025 at 2:12 PM, Nazirov Eldar : This message was deleted. May 28, 2025 at 2:13 PM, Nazirov Eldar : Sziasztok kéne segítség katod oldalon Airshower ben áll AGV köszönöm May 28, 2025 at 2:16 PM, Mr.Miti (미티) FA : Rendben érkezünk May 28, 2025 at 2:25 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon megállt az automata raktár. Pallet over size alarm, Pallet Abnormal Position Alarm. Segítséget kérek May 28, 2025 at 4:28 PM, 주범진 : @Nazirov Eldar I just wonder check if the Agv is working well May 28, 2025 at 4:32 PM, Nazirov Eldar : at the moment it's good May 28, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.28. "B" műszak, 8+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Böröczki Balázs, Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián, --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin ------------- May 28, 2025 at 6:22 PM, Szücs Géza FT-B : @Kokhan Yurii @Varga Zoltán Sziasztok. Légyszives le tudnátok írni, hogy ma éjszaka mi a termelési terv? May 28, 2025 at 6:24 PM, Kokhan Yurii : @Szücs Géza FT-B szia, anod 1,2 katod 1,2 May 28, 2025 at 6:25 PM, Szücs Géza FT-B : Anódra mennyi anyagotok van még? vagy UT megcsinálta az Airshowert? May 28, 2025 at 6:36 PM, Kokhan Yurii : melyik airshowert? May 28, 2025 at 6:37 PM, Szücs Géza FT-B : AN May 28, 2025 at 6:46 PM, Szücs Géza FT-B : This message was deleted. May 28, 2025 at 6:46 PM, Szücs Géza FT-B : megyek May 28, 2025 at 6:55 PM, Varga Tamás Powder : Sziasztok. Katod oldalt a termelésben az 1es és a 2es sor között az AGV 2-3mp megáll és hibára kiáll majd ujra elindul. Megtudnátok nézni? Köszönöm May 28, 2025 at 6:56 PM, Szücs Géza FT-B : melyiket intézzem előbb? CA oldal vagy AN oldal? May 28, 2025 at 6:57 PM, Varga Tamás Powder : CA légyszives May 28, 2025 at 7:00 PM, KIM SEYEON [김세연]_FA : Is there any air shower proble.? May 28, 2025 at 7:00 PM, KIM SEYEON [김세연]_FA : problem May 28, 2025 at 7:01 PM, Szücs Géza FT-B : on AN side. Can I test or not? May 28, 2025 at 7:02 PM, KIM SEYEON [김세연]_FA : agv need pio with air shower. if air shower has a problem, we cannot use agv. May 28, 2025 at 7:03 PM, Szücs Géza FT-B : @Noémi (소미) azt az információt kaptam, hogy az AN air shower kézzel sem ment, de most az operátorok tudnak ki és be közlekedni. May 28, 2025 at 7:10 PM, Noémi (소미) : 음극 에어샤워가 오늘 수동으로도 작동하지 않았던 것으로 전달 받았습니다. 현재는 오퍼레이터들이 에어샤워에 들어갈 수 있고 나갈 수 있습니다. May 28, 2025 at 7:11 PM, Varga Tamás Powder : Hello. we need these materials on powder anode side: 10 palletts bsk10t 112-00239A Thank you Sziasztok segitséget szeretnék majd kérni a paletták leszedésére anod oldalra. Köszönöm May 28, 2025 at 7:12 PM, Szücs Géza FT-B : @mcs please May 28, 2025 at 7:22 PM, VK (mcs) : Currently there are 6 materials on the conveyor. I will start releasing after those. May 28, 2025 at 7:32 PM, Varga Tamás Powder : @VK (mcs) then I only need 5 palettes thank you May 28, 2025 at 7:33 PM, VK (mcs) : Sure. I will start to releasing. May 28, 2025 at 7:44 PM, VK (mcs) : Materials have been released. May 28, 2025 at 7:45 PM, KIM SEYEON [김세연]_FA : 음극 에어샤워 동작 안하는것을 UT쪽도 알고 있나요? @Szücs Géza FT-B UT에 전달바랍니다. May 28, 2025 at 7:48 PM, Noémi (소미) : Tudja a UT hogy az anódon az Air shower ajtó nem működik? @Szücs Géza FT-B kérlek add át a UT-nak az információt. May 28, 2025 at 7:49 PM, Szücs Géza FT-B : ezen túl vagyok. szerintük nincs baja. May 28, 2025 at 7:52 PM, Noémi (소미) : UT분과 이미 협의를 했습니다. UT가 에어샤워 문이 문제 없다 합니다. May 28, 2025 at 7:59 PM, KIM SEYEON [김세연]_FA : 네 그럼 자동으로 가동하시죠. May 28, 2025 at 8:04 PM, Noémi (소미) : Rendben, akkor működtessük automatában. May 28, 2025 at 8:04 PM, Szücs Géza FT-B : rendben, leszedem a már kikért raklapokat, és tesztelek 2-t May 28, 2025 at 8:06 PM, Szücs Géza FT-B : @Kokhan Yurii @Varga Tamás Powder valaki ide tud jönni picit? May 28, 2025 at 8:07 PM, Varga Tamás Powder : Megyek May 28, 2025 at 8:09 PM, Noémi (소미) : 네 알겠습니다. 출고시켰던 팔레트만 매뉴얼로 내리고, 자동 모드로 AGV 테스트 진행할 예정입니다. May 28, 2025 at 9:10 PM, Varga Tamás Powder : Katod 1es sornál az agv megált, nincs hiba üzenet. Megnéznétek? Köszönöm May 28, 2025 at 9:11 PM, Szücs Géza FT-B : megyek May 28, 2025 at 9:37 PM, Szücs Géza FT-B : kész May 28, 2025 at 11:43 PM, Varga Tamás Powder : Katod raktárban nem szedi le az anyagot az AGV. Megtudná valaki nézni? Köszönöm May 29, 2025 at 12:10 AM May 29, 2025 at 12:10 AM, Kokhan Yurii : ? May 29, 2025 at 12:11 AM, VK (mcs) : @FA Please check Cathode powder conveyor E0CNVC12-port 7 is out of service. May 29, 2025 at 12:21 AM, Szücs Géza FT-B : megyek May 29, 2025 at 12:36 AM, Szücs Géza FT-B : kész May 29, 2025 at 12:36 AM, Szücs Géza FT-B : ez is kész May 29, 2025 at 1:17 AM, Kokhan Yurii : Sziasztok, Katod air shower AGV megállt. Nézzétek meg légyszíves. Köszönöm May 29, 2025 at 1:32 AM, Varga Tamás Powder : Megoldottam, nem kell jönni 😊 May 29, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 29, 2025 at 8:17 AM, 배광근 (Ben) : 안녕하십니까 작일 분체 음극 자동화창고 문제가 있었는데, 오늘 정상작동 가능한지 알 수 있을까요? May 29, 2025 at 8:20 AM, KIM SEYEON [김세연]_FA : 네 어제 정상작동 하는것으로 확인했는데 가동해보시고 문제있으면 알려주십시오. May 29, 2025 at 8:20 AM, 배광근 (Ben) : 넵 확인해보겠습니다 감사합니다! May 29, 2025 at 11:49 AM, 주범진 : @KIM SEYEON [김세연]_FA @Sazzad Bhai SKon @김주연 @Dániel Hufnágel 안녕하세요 분체실 팔레트 1f에 수동으로 빼야하는데 도움 요청 드려도 될까요? 하기의 자재들이 자동화창고에 홀드 상태로 되어있어서 현재 수동으로 빼야하는 상황인 것 같습니다 Cp3k 3plt PS112-2502120038 PS112-2501100073 PS112-2502170072 M36H 1plt PS112-2501260015 May 29, 2025 at 11:50 AM, Mohammad Amir : Dear Manager, Good afternoon, I am working on it. Thank you very much! May 29, 2025 at 11:51 AM, Sazzad Bhai SKon : We'll send them to CNV P07 May 29, 2025 at 11:52 AM, Sazzad Bhai SKon : All the out bound ports and RTV is oos now. @FA please check the STK May 29, 2025 at 11:53 AM, Sazzad Bhai SKon : Powder anode 1F, all STK May 29, 2025 at 11:53 AM, Mohammad Amir : Dear Manager, I have successfully transferred all the requested materials to O/P ports of CNVA12. Feel free to contact me if you need further assistance. Thank you very much! May 29, 2025 at 11:56 AM, 주범진 : Thank you did you make job? @Dániel Hufnágel can you arrange some person to put the material donw on the floor? May 29, 2025 at 11:56 AM, Mohammad Amir : Yes Manager, I have already created the job. Thank you very much! May 29, 2025 at 11:56 AM, adambenczik : Dániel is "D" shift May 29, 2025 at 11:57 AM, adambenczik : It is "A" shift today May 29, 2025 at 11:57 AM, Mohammad Amir : @adambenczik Please check this issue it is blocking materials delivery. Thank you very much! May 29, 2025 at 12:03 PM, 주범진 : Thank you When can you come and help? May 29, 2025 at 12:04 PM, Mr.Miti (미티) FA : They go after dinner. May 29, 2025 at 1:01 PM, adambenczik : We are here May 29, 2025 at 1:09 PM, 주범진 : Can you please take those out? Our team members will move that inside after you do @Nazirov Eldar could you please arrange someone to anode side? These plt need to take out manually. Please move those inside May 29, 2025 at 1:11 PM, adambenczik : How many paletts do we need to take out? May 29, 2025 at 1:11 PM, 주범진 : @Nazirov Eldar And attach yellow tape and writedown 'hold' on the tape May 29, 2025 at 1:11 PM, 주범진 : Cp3k 3plt PS112-2502120038 PS112-2501100073 PS112-2502170072 M36H 1plt PS112-2501260015 May 29, 2025 at 1:11 PM, adambenczik : Thank you May 29, 2025 at 1:12 PM, 주범진 : Thank you May 29, 2025 at 1:13 PM, Nazirov Eldar : Okay May 29, 2025 at 1:54 PM, adambenczik : We took out all of it 👍 May 29, 2025 at 1:54 PM, Mr.Miti (미티) FA : Thank you guys! (thumbsup) May 29, 2025 at 1:59 PM, Nazirov Eldar : was done mister May 29, 2025 at 2:24 PM, 윤경환 : @FA Hello. Please check the anod STK2. May 29, 2025 at 2:41 PM, Molnár Ferenc : Gyertek légyszíves! Meg állt a betárolás. A daru fel vette az anyagot és megállt félúton. Alapanyag raktár földszinten anód oldalon. May 29, 2025 at 2:43 PM, adambenczik : 10 perc és ott vagyunk May 29, 2025 at 3:26 PM, Mr.Miti (미티) FA : @Mohammad Amir Please check PS112-2503210217 palett size. If its not 1000x1000, please set it 1000x1000. Thank you ! May 29, 2025 at 3:27 PM, Mohammad Amir : Checking May 29, 2025 at 3:32 PM, Mohammad Amir : Unfortunately Mr.Miti,I have not authority to perform this operations. Please get in touch with Manufacturing team. Thank you very much! May 29, 2025 at 3:34 PM, Mr.Miti (미티) FA : Thank you! May 29, 2025 at 3:44 PM, adambenczik : Kész vagyunk May 29, 2025 at 3:44 PM, Molnár Ferenc : Köszönöm May 29, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.29. "B" műszak, 9+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Böröczki Balázs --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(1): 김지수 May 29, 2025 at 6:22 PM, Szücs Géza FT-B : @Kokhan Yurii @Varga Zoltán Sziasztok. Légyszives le tudnátok írni, hogy ma éjszaka mi a termelési terv? May 29, 2025 at 6:24 PM, Kokhan Yurii : @Szücs Géza FT-B szia. Anod 1,2 Katod 1,2 May 29, 2025 at 7:42 PM, Kokhan Yurii : Sziasztok, Anod raktár AGV megal nézzétek meg légyszíves. Köszönöm May 29, 2025 at 7:44 PM, Szücs Géza FT-B : @Pálosi Róbert légyszives nézd meg May 29, 2025 at 7:47 PM, Czeilinger Krisztián : Nemsokára megyek. May 29, 2025 at 10:08 PM, (Unknown) left this chatroom. May 29, 2025 at 10:12 PM, Varga Tamás Powder : Hello. we need these materials on powder anode side: 15 palletts bsk10t 112-00239A Thank you Sziasztok segitséget szeretnék majd kérni a paletták leszedésére anod oldalra. Köszönöm May 29, 2025 at 10:12 PM, Varga Tamás Powder : @Mohammad Amir May 29, 2025 at 11:46 PM, Varga Tamás Powder : @Mohammad Amir hello. what I asked for is bsk10t can you delete the rest? because we can now ask for it in the vending machine thank you May 29, 2025 at 11:47 PM, Shakir (MCS) : I will cancel the job Thank you May 30, 2025 at 5:58 AM May 30, 2025 at 5:58 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (2): Martina Dávid, Kiss Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 30, 2025 at 8:05 AM, Horváth Tamás : Sziasztok. Poron Katód oldalt megállt a robot a termelésbe. Elméletileg semmi nincs az utjában. May 30, 2025 at 11:31 AM, Horváth Tamás : Sziasztok poron anód oldalt meg állt az AGV. Legyszíves nézzétek meg May 30, 2025 at 11:32 AM, Dániel Hufnágel : Területen belül vagy kívül? May 30, 2025 at 11:32 AM, Dániel Hufnágel : @Horváth Tamás May 30, 2025 at 11:33 AM, Horváth Tamás : Belül.. bocsi May 30, 2025 at 11:33 AM, Dániel Hufnágel : Érkezem May 30, 2025 at 11:36 AM, Horváth Tamás : Illetve Katód oldalt nem ad már ki több alapanyagot a raktát. Ellenörinzi kellene hogy elfogyott-e? May 30, 2025 at 11:41 AM, Dániel Hufnágel : @Sazzad Bhai SKon Can you check please how many aviable do we have for chatode lines? May 30, 2025 at 11:42 AM, duzzaman Md (MCS) : Cathode reels ? May 30, 2025 at 11:43 AM, Szabadi Miki : Photo May 30, 2025 at 11:44 AM, Dániel Hufnágel : Chatode powder material May 30, 2025 at 11:48 AM, duzzaman Md (MCS) : 82 Ecopro material available. But they are not inside the material. So, available lot is 0 May 30, 2025 at 11:49 AM, duzzaman Md (MCS) : Anode :182 M36_BTR May 30, 2025 at 11:51 AM, duzzaman Md (MCS) : *inside the STK May 30, 2025 at 11:59 AM, duzzaman Md (MCS) : @FA PLEASE CHECK Eostkc32_p01 Its OOS. Jobs are getting delayed May 30, 2025 at 12:02 PM, Dániel Hufnágel : Please share this at electrode group, its only stand for powder area May 30, 2025 at 12:02 PM, Dániel Hufnágel : But we will check it May 30, 2025 at 1:33 PM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Anode warehouse to GF port. DPS112-2502170022 UNk20250305230653 UNK-241129142725A UNKDUP-PS112-2502120531-2049516062030345 4 pallet. May 30, 2025 at 1:36 PM, Sazzad Bhai SKon : We'll transfer to CNV P07 May 30, 2025 at 1:40 PM, Sazzad Bhai SKon : @김주연 hello pm, all the cathode powder STK (GF) Manaul ports are IN port. We need one out port thank you May 30, 2025 at 1:42 PM, Sazzad Bhai SKon : Not needed, these are anode materials. Anode side is okay May 30, 2025 at 1:45 PM, duzzaman Md (MCS) : Transferred initiated to M01 and M02 port May 30, 2025 at 1:47 PM, 윤경환 : Thank you.👍 May 30, 2025 at 2:01 PM, 윤경환 : @ MCS/RTD I'm looking for 2 pallet (PS112-2503130028, PS112-2502130553) Can you check it? May 30, 2025 at 2:10 PM, duzzaman Md (MCS) : ****28 last location was in E0STKA13_C01 Transfer was aborted at 2025/05/19 14:56 by operator Checking the 2nd one May 30, 2025 at 2:12 PM, 윤경환 : Can you send to GF port?? May 30, 2025 at 2:15 PM, duzzaman Md (MCS) : As we dont know the accurate physical location, we won't be able to send it. May 30, 2025 at 2:16 PM, duzzaman Md (MCS) : Could you please re-check the 2nd carrier number ? May 30, 2025 at 2:17 PM, 윤경환 : Please wait for 5 min. May 30, 2025 at 2:23 PM, 윤경환 : This message was deleted. May 30, 2025 at 2:23 PM, 윤경환 : PS112-2502120553 May 30, 2025 at 2:28 PM, duzzaman Md (MCS) : For this, it was removed from E0CNVA11_RTV01 on 2025/05/08 16:16. No further information is available May 30, 2025 at 2:48 PM, 윤경환 : Okay. Thank you.👍 May 30, 2025 at 3:27 PM, 윤경환 : @ FA Hello. Please check the E0STKA13. May 30, 2025 at 3:28 PM, 주범진 : @duzzaman Md (MCS) @Sazzad Bhai SKon @Dániel Hufnágel @Horváth Tamás hello Please take this powder out from warehouse? PS112-2407150031 It's located in the bottom rack of anode powder warehouse May 30, 2025 at 3:28 PM, Dániel Hufnágel : Is at first floor right now? May 30, 2025 at 3:29 PM, 주범진 : Yes right May 30, 2025 at 3:31 PM, duzzaman Md (MCS) : We couldn't find such carriers in MCS/RTD. Could you perhaps check the number again please 🙏 May 30, 2025 at 3:38 PM, Dániel Hufnágel : Technican will go up, just please be patient, only have two technican for electrode area May 30, 2025 at 3:46 PM, Dániel Hufnágel : Technicans are up there, but still there is no material May 30, 2025 at 3:46 PM, Dániel Hufnágel : @duzzaman Md (MCS) can you make order fast please? May 30, 2025 at 3:48 PM, 주범진 : That plt number is correct May 30, 2025 at 3:49 PM, 주범진 : 112-00237A May 30, 2025 at 3:49 PM, Sazzad Bhai SKon : Yes but it's stored as UNK at 0201103, we're transferring May 30, 2025 at 3:53 PM, Sazzad Bhai SKon : But this rack is empty. Job could not be executed May 30, 2025 at 3:59 PM, Sazzad Bhai SKon : SCS please confirm if there is any material. E0stka11, 0201103. We tried to transfer but it says there's no material there May 30, 2025 at 4:00 PM, Oláh András : We are here, check the shelf May 30, 2025 at 4:02 PM, Szabadi Miki : Empty May 30, 2025 at 4:03 PM, Oláh András : Should we stay here for any other reason? May 30, 2025 at 4:04 PM, duzzaman Md (MCS) : No need stay. We'll update the location May 30, 2025 at 4:04 PM, 주범진 : You can take out manually May 30, 2025 at 4:05 PM, 주범진 : This exist physical powder May 30, 2025 at 4:05 PM, Sazzad Bhai SKon : But there is no material on the shelf., it's empty. May 30, 2025 at 4:05 PM, Oláh András : The self is empty we checked phisically May 30, 2025 at 4:06 PM, 주범진 : Basically it shows empty at bottom line May 30, 2025 at 4:08 PM, Oláh András : Can u show us the shelf? We are at GF powder load anode side May 30, 2025 at 4:09 PM, 주범진 : Youc can see that if you go gf anode side May 30, 2025 at 4:10 PM, Oláh András : Please come here May 30, 2025 at 4:14 PM, Oláh András : Shelf 02-011-03 is empty, scs shows it too. What else you wanna take out? May 30, 2025 at 4:21 PM, 주범진 : i'm working at other buidling Tomorrow i will check with other person May 30, 2025 at 4:22 PM, Oláh András : Okay. May 30, 2025 at 6:13 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.30 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 31, 2025 at 5:56 AM May 31, 2025 at 5:56 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 31, 2025 at 8:04 AM, 윤경환 : @ MCS/RTD Good morning! Please NG status pallets in the Anode warehouse to GF port. PS112-2502190143 PS112-2403190028 PS112-2501260064 PS112-2309060066 PS112-2501260061 PS112-2411150267 PS112-2411150420 PS1112-2503050107 PS112-2404070041 PS112-2308110519 10 pallet. May 31, 2025 at 8:05 AM, Mohammad Amir : Dear Manager, Good morning,I am working on it. Thank you very much! May 31, 2025 at 8:14 AM, Mohammad Amir : Dear Manager, All the requested materials have been Released at the M01/02 port of CNVA11 . ✅ Feel free to contact me again if you need any further assistance. Thank you very much! May 31, 2025 at 8:15 AM, 윤경환 : Thank you for your Support.👍 May 31, 2025 at 8:16 AM, Mohammad Amir : You are welcome! May 31, 2025 at 9:48 AM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKA11_C01 there is Load Oversize error and because of this one job is pending. Thank you very much! May 31, 2025 at 9:49 AM, Mohammad Amir : Please also check E0STKA13_C01 there is Load Oversize error as well and because of this one job is pending. Thank you very much! May 31, 2025 at 9:54 AM, Dániel Hufnágel : On my way May 31, 2025 at 11:49 AM, Dániel Hufnágel : @Mohammad Amir at electrode GF we have one material with ID of PS112-2407150031 at E0STKA11 Port P01! Can you please make an order to M01? May 31, 2025 at 11:50 AM, Mohammad Amir : Sure Dániel, working on it. May 31, 2025 at 11:50 AM, Dániel Hufnágel : Thank you May 31, 2025 at 12:02 PM, Mohammad Amir : Unfortunately Daniel this carrier has no information in MCS and RTD , That's why manual job creation from our side is not possible. Please remove manually. Thank you very much! May 31, 2025 at 12:07 PM, Dániel Hufnágel : Thats sad🫠🥲 May 31, 2025 at 2:54 PM, Varga Zoltán : Sziasztok poron anód raktárból nem veszi ki az #1 AGV az anyagot nézzétek meg légyszi köszönöm May 31, 2025 at 2:55 PM, Szabadi Miki : Nemsoká megyünk May 31, 2025 at 4:34 PM, Varga Zoltán : Sziasztok Anód területen AGV Air shower előtt megállt nem jön ki. Nézzétek meg légyszi May 31, 2025 at 4:35 PM, Dániel Hufnágel : Szia! Nem láttad esetleg valaki hozzá nyúlt az AGVhez? May 31, 2025 at 4:36 PM, Oláh András : Mindjárt megyünk May 31, 2025 at 4:39 PM, Varga Zoltán : Azt Nem láttam, a közelében pakolták a szemetet May 31, 2025 at 4:40 PM, Oláh András : Látjuk a villa ütközőjét ütötték meg.... May 31, 2025 at 4:48 PM, Varga Zoltán : Egy másik meg katód Air showerben ragadt May 31, 2025 at 4:49 PM, Oláh András : Na od már megyünk May 31, 2025 at 6:14 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.31 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 31, 2025 at 6:17 PM, Ynja/ivancsa FA left this chatroom. June 1, 2025 at 12:41 AM June 1, 2025 at 12:41 AM, VK (mcs) : @manufacturing MCS received unload request from E1PLC031-P01 ! Please confirm. June 1, 2025 at 1:09 AM, Powder tréner : Hali a poron az Anod oldalon az AGV bent marad az aír Showerben és mind a két ajtó nyitva meg nézitek June 1, 2025 at 1:10 AM, Marsi Gábor : Megyek June 1, 2025 at 6:23 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs June 1, 2025 at 6:39 AM, Varga Zoltán : Sziasztok poron anód raktárból nem veszi ki az #1 AGV az anyagot nézzétek meg légyszi köszönöm June 1, 2025 at 9:22 AM, Varga Zoltán : Hello AGV #1 megállt anód #1-nél megnéznétek légyszi? June 1, 2025 at 9:26 AM, Oláh András : Megoldva👍 June 2, 2025 at 4:34 AM June 2, 2025 at 4:34 AM, Zagyva Tamás : Jó reggelt Poron az anód és katód raktárnál fel kellene húzni a tűzgátló függönyöket June 2, 2025 at 4:36 AM, Farkas Tamàs : Jó reggelt! Ha engedélyt kapunk arra hogy be lehet menni akkor megyünk June 2, 2025 at 5:02 AM, Marsi Gábor : Kész June 2, 2025 at 5:03 AM, Zagyva Tamás : Kösz June 2, 2025 at 6:23 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.02. "B" műszak, 9+1+1/12+1 Tech, 1Sl Overtime(1): Kiss Balázs Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(3): Takács Ádám, Denkó János, Böröcz Tamás Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(1): Boromisza Z June 2, 2025 at 8:52 AM, Varga Tamás Powder : Hello. anodon cp3k :112-00242A is out of stock. In the 3rd row, the E1PLA031_P02 port indicates that it is out of stock. Could you check? Thank you June 2, 2025 at 8:55 AM, Sazzad Bhai SKon : Do you need materials on P02 port? June 2, 2025 at 8:56 AM, Varga Tamás Powder : Yes June 2, 2025 at 8:58 AM, Sazzad Bhai SKon : We received LR from E1PLA031 but there's no material available June 2, 2025 at 8:59 AM, Varga Tamás Powder : Okay June 2, 2025 at 10:59 AM, Molnár Ferenc : Sziasztok! Por raktár földszinten kérek segítséget anód oldalon. Light curtain 11 detect. Rtv tray data mismatch error. Köszönöm June 2, 2025 at 11:11 AM, Pálosi Róbert : Megyünk June 2, 2025 at 12:48 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon STK-A3 Tray Abnormal Position. Segítséget kérek June 2, 2025 at 12:51 PM, Rácz Dániel / FA : Jövök June 2, 2025 at 1:20 PM, Varga Tamás Powder : Sziasztok. A poron Katod raktárban nem veszi le az anyagot. Megnéznétek? Köszönöm June 2, 2025 at 1:22 PM, Rácz Dániel / FA : Itt vagyok nem sokára megnézem June 2, 2025 at 1:22 PM, Rácz Dániel / FA : @Szücs Géza FT-B gyere légyszíves anód oldali porraktárba June 2, 2025 at 1:26 PM, Szücs Géza FT-B : megyek, kell vigyek valamit? June 2, 2025 at 1:27 PM, Rácz Dániel / FA : Csak a tudásod June 2, 2025 at 1:29 PM, Rácz Dániel / FA : Elvileg megoldottuk June 2, 2025 at 1:31 PM, Rácz Dániel / FA : Maradj, sikerült megoldani. June 2, 2025 at 1:32 PM, Rácz Dániel / FA : Jövök June 2, 2025 at 1:33 PM, Szücs Géza FT-B : oksi June 2, 2025 at 1:44 PM, Rácz Dániel / FA : Kész June 2, 2025 at 2:08 PM, Rácz Dániel / FA : @Molnár Ferenc beállítottam a szenzort. Remélem most már folyamatosan fog működni. June 2, 2025 at 2:09 PM, Molnár Ferenc : Köszönöm szépen June 2, 2025 at 2:10 PM, Rácz Dániel / FA : Szívesen, csak legyen jó ! 😅 June 2, 2025 at 2:42 PM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Anode warehouse to GF port. PS112-2309010119 UNKEMP-250304085613A PS112-2503210217 UNKEMP-250403144345A 4 pallet. June 2, 2025 at 2:53 PM, Varga Tamás Powder : A poron katod raktárban ismét nem veszi le az anyagot. Megnéznétek? Köszönöm June 2, 2025 at 2:54 PM, Varga Tamás Powder : Fényfüggöny is be jelzett June 2, 2025 at 2:57 PM, duzzaman Md (MCS) : Job created for 1 , having trouble with other 3. Working in it June 2, 2025 at 3:06 PM, 윤경환 : @Fa Hello. Please check the anode side E0STKA12. Error code 128.Fork#1 Empty Release Error ( Rack ) June 2, 2025 at 3:10 PM, Kokhan Yurii : ??? June 2, 2025 at 3:13 PM, Szücs Géza FT-B : megyek June 2, 2025 at 3:20 PM, Szücs Géza FT-B : STKA 11 and 12 working again June 2, 2025 at 3:21 PM, 윤경환 : Thank you.👍 June 2, 2025 at 3:30 PM, 윤경환 : What's wrong with PS112-2503210217? June 2, 2025 at 3:31 PM, Szücs Géza FT-B : kész June 2, 2025 at 3:32 PM, duzzaman Md (MCS) : This message was deleted. June 2, 2025 at 3:33 PM, duzzaman Md (MCS) : ***119 job already finished ***13A ___ STKA 11 0202009 ***217____ STKA12 0201002 ***345A___STKA12 0201702 Please check these locations physically and see if its in service. Also, try resetting the STK. June 2, 2025 at 3:34 PM, 윤경환 : Thank you.👍 June 2, 2025 at 3:36 PM, Varga Tamás Powder : @Sazzad Bhai SKon hello. I requested the anode material on line 3 (M36H) but the warehouse doesn't let me know how to bring it to the AGV. Could you check what the problem could be? June 2, 2025 at 3:41 PM, Sazzad Bhai SKon : Please tell me the exact machine name. Is is E1PLA031? June 2, 2025 at 3:52 PM, Varga Tamás Powder : E1PLA031P01 June 2, 2025 at 3:58 PM, duzzaman Md (MCS) : There is no active LR. Please press LR June 2, 2025 at 4:16 PM, duzzaman Md (MCS) : Did you check the shelfs as those jobs are till alternated June 2, 2025 at 4:24 PM, Varga Tamás Powder : I can now request material. Thank you. June 2, 2025 at 5:42 PM, Molnár Ferenc : Sziasztok! Elektróda raktár földszinten anód oldalon nem viszi el a daru az anyagot. PIO complete on time over error. Segítséget kérek June 2, 2025 at 5:54 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.02 Time: 18:00-06:00 1. Ji Seok Beom June 2, 2025 at 6:00 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 2, 2025 at 6:21 PM, VK (mcs) : @FA Please check Anode powder STK A13 PIO complete on timer over time error. June 2, 2025 at 8:00 PM, VK (mcs) : @FA Please check Anode powder STK A12 & A11 There is transfer Job to conveyor manual ports but carriers are not transferred. June 2, 2025 at 8:01 PM, VK (mcs) : It shows empty error! June 2, 2025 at 9:17 PM, Nazirov Eldar : Sziasztok szeretnék kérni segíteni porra Katód raktár áll (Data mismatch error ) nézzétek rá légyszíves köszönöm June 2, 2025 at 9:28 PM, VK (mcs) : @FA Please check Cathode conveyor E0CNVC12 port 7 It's out of service. June 2, 2025 at 10:51 PM, VK (mcs) : @FA Please check Cathode powder STK C13 Hoist time over error. June 2, 2025 at 10:59 PM, Mr.Miti (미티) FA : Done June 3, 2025 at 6:00 AM June 3, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.03. "B" műszak, 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(2): Denkó János, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Böröcz Tamás Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, G June 3, 2025 at 8:12 AM, Kőszegi Bence Csaba : Sziasztok! Fólia raktárba kérnénk segítséget! Tegnap óta nem vitt el 2 tekercset a daru. June 3, 2025 at 8:13 AM, Kőszegi Bence Csaba : (Betárolásnál) June 3, 2025 at 8:17 AM, Rácz Dániel / FA : Kész June 3, 2025 at 8:18 AM, Kőszegi Bence Csaba : Köszönöm😇 June 3, 2025 at 10:39 AM, 윤경환 : 안녕하세요. 혹시 CCS 담당자분 계실까요? June 3, 2025 at 10:57 AM, 윤경환 : 양극분체 투입중인데 목적지가 생성이 안됩니다. 확인 부탁 드립니다. June 3, 2025 at 10:58 AM, KIM SEYEON [김세연]_FA : @상진 차장님 확인 부탁드립니다 June 3, 2025 at 11:00 AM, 상진 : 지게차로 빼서 다시 넣어주실수 있을까요?? June 3, 2025 at 11:11 AM, 윤경환 : 투입 되고 있습니다. 확인 감사 합니다. June 3, 2025 at 12:02 PM, Varga Tamás Powder : Sziasztok. A poron katod raktárban nem akarja az AGV leszedni az anyagot. Csak várakozó állásba van. Megtudnátok nézni? Köszönöm June 3, 2025 at 12:03 PM, Szabadi Miki : Igen megyünk June 3, 2025 at 1:21 PM, Kokhan Yurii : Sziasztok. Poron katod raktár nem működik nézzétek meg légyszíves. Köszönöm June 3, 2025 at 1:26 PM, Varga Tamás Powder : @Szabadi Miki ugyan az a probléma mikor fennt voltál. A palettát nem adta ki rendesen June 3, 2025 at 1:29 PM, Shakir (MCS) : @FA Please check E0CNVC11_M01 data mismatch error. Thank you June 3, 2025 at 1:32 PM, Szabadi Miki : This message was deleted. June 3, 2025 at 1:33 PM, Szabadi Miki : Rendben mindjárt megyünk June 3, 2025 at 1:46 PM, Kokhan Yurii : Meg mennyi kell várni? June 3, 2025 at 1:47 PM, Csanálosi Gábor FA : Már mindjárt ott vannak June 3, 2025 at 4:27 PM, Kokhan Yurii : Sziasztok. Poron katod raktár AGV megal nézzétek meg légyszíves. Köszönöm June 3, 2025 at 4:28 PM, Szabadi Miki : Mindjárt megyünk June 3, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:09 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.03 Time: 18:00-06:00 1. Ji Seok Beom June 4, 2025 at 3:59 AM June 4, 2025 at 3:59 AM, Nazirov Eldar : Sziasztok Anód raktál előtt áll 1 AGV haverom, megtudjátok nézni köszönöm June 4, 2025 at 4:00 AM, Mohammad Amir : @Manufacturing Please check there jobs are Alternated cause E0CNVA11_M01/02/03 are set to "IN" type. Please make it OUT type so that these jobs can be completed. Or please also let me know if you don't need these materials:- UNKEMP-250304085613A/2504033144345A. PS112-2503210217. Thank you very much! June 4, 2025 at 4:10 AM, adambenczik : Megyünk June 4, 2025 at 5:58 AM, Varga Zoltán : Jó reggelt katód #3-nál AGV megállt nézzétek meg légyszi June 4, 2025 at 6:04 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.04. FA "D" műszak: 9/13 Overtime (0):- Substitution (1): Szücs Géza Imre Sick (1):Nagy Zsolt Holiday (3): Martina Dávid, Kasztel Balázs, Hufnágel Dániel Shift change(0): ----- Elektróda(3): Oláh András, Szabadi Miklós, Kiss Balázs ----- Assembly GF(2): Novák Károly, Zsurbej Zsolt ----- Assembly 1F(2): Kovács Szabolcs, Novák Zoltán ----- Form+Modul(2): Nagy Gábor, Magyar Balázs June 4, 2025 at 6:05 AM, Szabadi Miki : Nemsoká megyünk June 4, 2025 at 11:02 AM, Molnár Ferenc : Sziasztok! Elektróda raktár földszinten katód oldalon kérek segítséget. Meg állt a betárolás, hibakód nincs. A kioszkon ír csak annyit E0STKC11 inactive. June 4, 2025 at 11:03 AM, Oláh András : Már rajta vagyunk June 4, 2025 at 11:03 AM, Molnár Ferenc : Köszönöm June 4, 2025 at 11:12 AM, Horváth Tamás : Hello.. Poron katód oldalt kellene egy kis segítség.. a raktár elött megpihent a kollega. June 4, 2025 at 11:13 AM, Szabadi Miki : Mindjárt ott vagyok lent voltam raktárnál June 4, 2025 at 2:50 PM, Horváth Tamás : Sziasztok Anód oldalt a robot megállt a raktár elött a poron😅 June 4, 2025 at 5:44 PM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.04 Time:18:00~06:00 Baek Hojong 전극 조성준 (Cho Sung Jun) GF 최명운 (CHOI Myoungwoon) 1F 김정희 (Kim jeong hul) June 5, 2025 at 3:12 AM June 5, 2025 at 3:12 AM, Powder tréner : Hello! I would like to ask for these materials: 6 pallets 112-00237A (M36H_BTR) 4 pallets 112-00239A (BSK-10T_BTR) 4 pallets 112-00247A (M36H_BTR) 4 pallets 112-00242A (PAS-CP3K) Anode Materials) June 5, 2025 at 3:17 AM, Powder tréner : Please wait for further manual release June 5, 2025 at 3:21 AM, VK (mcs) : Material released. June 5, 2025 at 3:22 AM, Powder tréner : Sorry but I won't need the other materials because my problem is solved and I will use the AGV robot Thank you June 5, 2025 at 3:25 AM, VK (mcs) : Only 6 BTR released. You won’t use it? June 5, 2025 at 3:26 AM, Zagyva Tamás : No June 5, 2025 at 3:26 AM, VK (mcs) : Ok June 5, 2025 at 3:27 AM, Zagyva Tamás : the AGV now operates automatically June 5, 2025 at 3:27 AM, Zagyva Tamás : Thank you June 5, 2025 at 6:48 AM, Varga Zoltán : Jó reggelt E1PLA031_P02 hívunk alapanyagot de kéken villog a lámpa megnéznétek légyszives hogy mi a probléma? Köszönöm June 5, 2025 at 6:49 AM, Szabadi Miki : @Shakir (MCS) please check , thank you June 5, 2025 at 6:51 AM, Shakir (MCS) : There is No material available. June 5, 2025 at 6:52 AM, Shakir (MCS) : LR received ✅ June 5, 2025 at 6:52 AM, Varga Zoltán : Thank you very much June 5, 2025 at 9:20 AM, 윤경환 : @ MCS/RTD Hello. Please pallets in the Cathode warehouse to GF port. PS111-2406110001 PS111-2406250022 PS111-2407080016 PS111-2412110087 PS111-2404200011 PS111-2406110030 PS111-2505030115 PS111-2406040331 PS111-2404200004 PS311-2504030110 UNKDUP-PS311-2504030110-5224100202116704 11 pallet. June 5, 2025 at 9:21 AM, Shakir (MCS) : Working on it June 5, 2025 at 9:21 AM, 윤경환 : Thank you.👍 June 5, 2025 at 9:35 AM, Shakir (MCS) : All pallets released except PS111-2505030115, not in carrier list could you please check id again. Thank you June 5, 2025 at 9:36 AM, 윤경환 : Please wait for 5 min. June 5, 2025 at 9:37 AM, Fábián Anna 언너 : PS111-2405030115 June 5, 2025 at 9:43 AM, Shakir (MCS) : Pallet released, Thanks June 5, 2025 at 1:03 PM, 윤경환 : @ MCS/RTD Sorry. Please pallets in the Cathode warehouse to GF port. PS311-2504030110 1 pallet. June 5, 2025 at 1:06 PM, Shakir (MCS) : Pallet released, Thank you June 5, 2025 at 1:07 PM, 윤경환 : Thank you for your support.👍 June 5, 2025 at 1:08 PM, Shakir (MCS) : You’re welcome June 5, 2025 at 5:54 PM, Baek Hojong(백호종)FA : Night shift 06.05. 18:00-06:00 Baek Hojong 백호종 PM 송태용 Song Taeyong Elec 김종원 Kim Jong Won Assy (1F） 오은향 OH EUN HYANG Assy(GF) June 5, 2025 at 6:06 PM, Zagyva Tamás : Jó napot Poron anód oldalon nem jön ki az alapanyag a raktárból.Felrakta a kiadó láncra,de a transzfer kocsi nem megy érte. June 5, 2025 at 6:13 PM, Farkas Tamàs : Megyek June 5, 2025 at 6:16 PM, Zagyva Tamás : Lehet hogy az a baj hogy hívták a robotot közbe meg rakta be anyagot az állásba? June 5, 2025 at 8:47 PM, Farkas Tamàs : A hibára PLC-s kolega fog érkezni June 6, 2025 at 6:26 AM June 6, 2025 at 6:26 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.06. 10+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Support(1): 김지 June 6, 2025 at 10:48 AM, KIM SEYEON [김세연]_FA : @장영환(Younghwan Chang) 피엠님 혹시 금일 생산이 있나요? June 6, 2025 at 10:48 AM, 장영환(Younghwan Chang) : 네 음극 생산합니다 June 6, 2025 at 10:48 AM, KIM SEYEON [김세연]_FA : 양극은 있을까요? June 6, 2025 at 10:51 AM, 장영환(Younghwan Chang) : 없습니다 June 6, 2025 at 11:00 AM, KIM SEYEON [김세연]_FA : 넵 June 6, 2025 at 4:36 PM, duzzaman Md (MCS) : @FA Please check E0CNVA12_RTV01 Its OOS. Thanks June 6, 2025 at 4:40 PM, Szücs Géza FT-B : 20 minits June 6, 2025 at 5:04 PM, Rácz Dániel / FA : I dont see problem June 6, 2025 at 5:09 PM, Szücs Géza FT-B : tudod manuálisan mozgatni? June 6, 2025 at 5:11 PM, duzzaman Md (MCS) : Its okay now.thank you. StkA12 is OOS. If you could kindly check this too June 6, 2025 at 5:12 PM, Rácz Dániel / FA : Minden megy szépen June 6, 2025 at 5:12 PM, Rácz Dániel / FA : I check June 6, 2025 at 5:13 PM, Rácz Dániel / FA : Solved June 6, 2025 at 5:13 PM, duzzaman Md (MCS) : Thank you 🫡 June 6, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 6, 2025 at 8:57 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.06 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 7, 2025 at 5:15 AM June 7, 2025 at 5:15 AM, Nazirov Eldar : Sziasztok szeretnék kérni segítséget Anód oldalon AGV nekiment Airshower ajtóba. June 7, 2025 at 5:16 AM, adambenczik : Megyünk June 7, 2025 at 5:20 AM, Kokhan Yurii invited Szarka Adrián. June 7, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.07. 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Boromisza Zoltán, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(1): 김지수 June 7, 2025 at 6:47 AM, Kokhan Yurii : Sziasztok Szeretném kérni az AGV indítását a Poron katódoldaláról. Köszönöm June 7, 2025 at 6:53 AM, Szücs Géza FT-B : hamarosan érkezik a technikus June 7, 2025 at 8:06 AM, Rácz Dániel / FA : AN oldalon utility segítségével az ajtó letesztelve AGV-vel, rendben működik. AN oldalon mind a 3 AGV automata módba kapcsolva. CA oldalon mind a 3 AGV automata módba kapcsolva. June 7, 2025 at 8:15 AM, Rácz Dániel / FA : @Kokhan Yurii elvittem a fényképezőt @Szücs Géza FT-B nek. June 7, 2025 at 8:16 AM, Kokhan Yurii : Rendben June 7, 2025 at 8:19 AM, Rácz Dániel / FA : E1PLC021_P02-es porton az AGV rosszul tette le a palettát, ami ez miatt eltört. Készült róla fénykép. June 7, 2025 at 10:16 AM, Rácz Dániel / FA : @Kokhan Yurii CA oldalon megállt az 1-es AGV megtudnátok nézni ? Köszi. June 7, 2025 at 10:30 AM, Kokhan Yurii : Tudz valaki jönni a Poron? June 7, 2025 at 10:31 AM, Szücs Géza FT-B : kint vagy bent? June 7, 2025 at 10:32 AM, Rácz Dániel / FA : Bent June 7, 2025 at 10:32 AM, Kokhan Yurii : Bent June 7, 2025 at 10:32 AM, Kokhan Yurii : Catod 2 June 7, 2025 at 10:32 AM, Szücs Géza FT-B : @Pálosi Róbert légyszives néz meg June 7, 2025 at 10:33 AM, Rácz Dániel / FA : 39-10 node között állt meg June 7, 2025 at 11:38 AM, Pálosi Róbert : Kész June 7, 2025 at 11:39 AM, Kokhan Yurii : Köszönöm June 7, 2025 at 12:24 PM, Kokhan Yurii : Sziasztok A Poron katod oldal AGV megal bent a területén. Nézzétek meg légyszíves Köszönöm June 7, 2025 at 12:24 PM, Rácz Dániel / FA : Indulok June 7, 2025 at 4:18 PM, Mohammad Amir : @FA Please check E0STKA11_C01 there is Hoist Driver Error. Thank you! June 7, 2025 at 4:26 PM, Szücs Géza FT-B : tádáá 😉😄 June 7, 2025 at 4:27 PM, Mohammad Amir : Köszönöm szepen! June 7, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+2: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 7, 2025 at 7:10 PM, VK (mcs) : @FA Please check Cathode powder STK C13 Hoist driver error. June 7, 2025 at 7:13 PM, adambenczik : We are coming June 7, 2025 at 7:53 PM, adambenczik : Solved June 8, 2025 at 6:11 AM June 8, 2025 at 6:11 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.08. 8+3+1/12+1 Tech, 1Sl, 1Sup. Overtime(3): Szabadi Miklós, Marsi Gábor, Harasztia Zoltán Holiday(1+1): Gerbovits Kevin, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(1): Böröczki Balázs --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Marsi Gábor --------------- Assy GF (3): Csanálosi Gábor, Denkó János, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes ---------- June 8, 2025 at 9:39 AM, Kokhan Yurii : Sziasztok A Poron területén AGV megalt Airshower-be. Nézzétek meg légyszíves Köszönöm June 8, 2025 at 9:40 AM, Marsi Gábor : Megyünk June 8, 2025 at 9:52 AM, Marsi Gábor : Kész June 8, 2025 at 10:52 AM, Shakir (MCS) : @FA Please check E0STKA11_C01 MCP Control power Trip. Thank you June 8, 2025 at 10:54 AM, Rácz Dániel / FA : iGO June 8, 2025 at 11:06 AM, Rácz Dániel / FA : Solved June 8, 2025 at 11:41 AM, Varga Tamás Powder : @Shakir (MCS) hello. on the anode line 2, the E1PLA021_P01 port does not come to the M36H material. the warehouse does not issue it. could you check it? thank you June 8, 2025 at 11:42 AM, Varga Tamás Powder : the warehouse does not release it June 8, 2025 at 11:48 AM, Shakir (MCS) : Please press LR again Thank you June 8, 2025 at 11:52 AM, Shakir (MCS) : Please press again June 8, 2025 at 11:56 AM, Varga Tamás Powder : I pressed it but it doesn't come now. June 8, 2025 at 12:02 PM, Shakir (MCS) : @FA @SCS @Rácz Dániel / FA LR received, carrier assign PS112-2503210217 located at E0STK12(0201002) but we are not receiving response from SCS side, In MCS job created. Please check why job not creating from SCS side. Thank you June 8, 2025 at 12:53 PM, Zagyva Tamás : Poron anód raktárból nem jön ki az anyag az anód 2-eshez.Kitöröltük a kérést és újra hívtuk,de úgyse jó June 8, 2025 at 1:08 PM, Szabadi Miki : @Shakir (MCS) Could you generate a new order for another pallet? There is currently a task that cannot be completed. June 8, 2025 at 1:13 PM, Shakir (MCS) : I will generate order only to port this CNVA12_P07. Not to machine. June 8, 2025 at 1:44 PM, Varga Tamás Powder : Hello! I would like to ask for these materials: 10 pallets 112-00237A (M36H_BTR) Thank you June 8, 2025 at 1:44 PM, Szücs Géza FT-B : hova? miért? June 8, 2025 at 1:45 PM, Varga Tamás Powder : A poron nem jó a 2es soron az 1es port nem tudunk anyagot kérni June 8, 2025 at 1:45 PM, Szücs Géza FT-B : az se fog menn, másik raklap kell June 8, 2025 at 1:45 PM, Shakir (MCS) : Working on it June 8, 2025 at 1:45 PM, Szücs Géza FT-B : nem a porttal van a baj!!!; June 8, 2025 at 1:45 PM, Szücs Géza FT-B : this palett doublen in STK June 8, 2025 at 1:46 PM, Varga Tamás Powder : Tudom csak az anyag meg kell nekünk SOS-be June 8, 2025 at 1:46 PM, Szücs Géza FT-B : PS112-25032102 nem fog kijönni, másik kell June 8, 2025 at 1:47 PM, Szücs Géza FT-B : hiába SOS..... nem a mi hibánk... June 8, 2025 at 1:48 PM, Szücs Géza FT-B : @MCS hibája lesz ha meg áll a termelés. Technikus azt kérte, hogy küldjön másik palettát..... erre mit csinál...?!?! ugyan azt a palettát máshova küldi.... June 8, 2025 at 1:53 PM, Shakir (MCS) : Please collect this pallet to E0CNVA12_P07 releasing. Thank you June 8, 2025 at 1:54 PM, Varga Tamás Powder : Szeretnék a porra kérni egy FA a 10 paletta leszedésére June 8, 2025 at 1:54 PM, Varga Tamás Powder : Köszönöm June 8, 2025 at 2:00 PM, Szücs Géza FT-B : nagyszerű srácok June 8, 2025 at 2:00 PM, Szücs Géza FT-B : meg lehetne oldani autómatán... June 8, 2025 at 2:01 PM, Szücs Géza FT-B : azt ki szedi le? June 8, 2025 at 2:02 PM, Szücs Géza FT-B : miért csinálunk plussz munkát? June 8, 2025 at 2:04 PM, Kokhan Yurii : Ma sokan vagytok. Nem? June 8, 2025 at 2:04 PM, Szücs Géza FT-B : és akkor szopassuk a másikat? June 8, 2025 at 2:05 PM, Szücs Géza FT-B : normálisan dolgozhatnának a negyed évben egy napot... June 8, 2025 at 2:06 PM, Zagyva Tamás : Nem akarok beleszólni,mert csak túlórás vagyok a poron,de ha nem jön ki az anyag a raktárból és mi ezt jeleztük,akkor nekünk kellene megoldani vagy nektek? June 8, 2025 at 2:07 PM, Szücs Géza FT-B : ok, leírom még egyszer, utoljára. a portnak nincs hibája, az jó. a baj a :PS112-25032102 palettával van. @MCS-nek törölni kell ezt a feladatot. és másik palettát kiküldeni.... ez lenne a feladat, 90 perccel ez előtt is ez lett volna a feladat.... June 8, 2025 at 2:09 PM, Szücs Géza FT-B : de oké, akkor manuál. @Rácz Dániel / FA megy manuálisan szedi le a cuccot June 8, 2025 at 2:09 PM, Shakir (MCS) : Cancelled June 8, 2025 at 2:09 PM, Zagyva Tamás : Köszönjük June 8, 2025 at 2:09 PM, Shakir (MCS) : Since I am working on electrode emty tray delivery delay. June 8, 2025 at 2:10 PM, Shakir (MCS) : I already cancelled 3 time but it created automatically. June 8, 2025 at 2:11 PM, Shakir (MCS) : If you see SCS there is no job for this carrier but MCS still exists June 8, 2025 at 2:12 PM, Szarka Adrián : Szia most akkor jó lesz vagy mi lesz vele ? June 8, 2025 at 2:12 PM, Szarka Adrián invited 이게리. June 8, 2025 at 2:12 PM, Rácz Dániel / FA : Megyünk June 8, 2025 at 2:14 PM, Szarka Adrián : Köszönöm szépen June 8, 2025 at 2:17 PM, Szücs Géza FT-B : Nem beszólás, csak felvetés: ha jelzem neked, hogy alacsony a fizetésem, akkor a te dolgod lesz azon emelni? Technikusoknak (és nekem is), el vannak véve jogok, több területen. Az orderek kezelése, törlése, létrehozása az MCS jogköre és feladata. Technikus kivizsgálta, egyeztettünk. A Probléma a palettával van, 2szer van bent a raktárban. 5mp lenne nekem megoldani, de már nincs a felhasználómnak joga ehhez. így a másik megoldás, hogy @mcs törli a feladatot és másik palettát küld. June 8, 2025 at 2:18 PM, Szücs Géza FT-B : @Shakir (MCS) PS112-25032102 Can u disable this palett? June 8, 2025 at 2:19 PM, Shakir (MCS) : I have already transffered 10 pallet of 112-00237A (M36H_BTR) please collect it from P07_CNVA12 and start the production. In that specific case we are not receiving response from SCS side that's why job is not progressing. June 8, 2025 at 2:19 PM, Szücs Géza FT-B : or something? June 8, 2025 at 2:19 PM, Szarka Adrián : Szia én se vitázom, de ezt azonnal egyszerűen el lehetett volna intézni, max szólsz nekem és fel megyek és meg beszélem velük. Máskor legyen ez. Köszi June 8, 2025 at 2:19 PM, Zagyva Tamás : Igen teljesen igazad van.Csak mivel az @mcs részéről nem jött megoldás,ezért a folyamatos termelés érdekében muszáj volt kikérnünk manuálisan anyagot és te ezt szopatásnak vetted,pedig nem annak szántuk. June 8, 2025 at 2:20 PM, Szarka Adrián : ‭+36 70 375 7992‬ ezen el érsz mindig June 8, 2025 at 2:21 PM, Szarka Adrián : @Kokhan Yurii @Zagyva Tamás ha ez miatt lesz megállás a mixingen kérlek írjátok meg mennyi idő lett ez miatt köszönöm June 8, 2025 at 2:22 PM, Szücs Géza FT-B : azért vagyok feszült, mert a megoldást tudjuk, csináltuk már. erre nincs hozzá jogunk..... azt jön valaki valahonnan, aki életében nem látott még ilyet és 6szor annyi joga van mint nekünk June 8, 2025 at 2:22 PM, Zagyva Tamás : Igen ez igaz sajnos June 8, 2025 at 2:27 PM, Shakir (MCS) : This message was deleted. June 8, 2025 at 2:29 PM, Shakir (MCS) : There is issue with the pallet PS112-2503210217 that's why we are not receiving response from SCS and job is not progressing. And whenever we are receiving LR job is creating again for the same carrier. I have already cancelled the command multiple times but it is creating automatically. Now I have resolved the issue it was bit tricky so now automatically job creation is possible. Meanwhile I already transferred 5 materials so production will not stop. Thank you very much! June 8, 2025 at 2:44 PM, Szücs Géza FT-B : Thank You very much. We don't have permissions in SCS. If we did, I would have solved the problem in 5-25 seconds. The problem is that this pallet number appears in two places in STKA12. June 8, 2025 at 2:45 PM, Shakir (MCS) : You’re welcome June 8, 2025 at 3:39 PM, Varga Tamás Powder : @Rácz Dániel / FA kérve lett anyag az anod 1re de nem megy érte az AGV pedig itt az anyag a P07es porton raktárban June 8, 2025 at 3:44 PM, Denkó Jani (F.A.) invited Böröcz Tamás. June 8, 2025 at 3:51 PM, Szücs Géza FT-B : elintézve June 8, 2025 at 3:52 PM, Szücs Géza FT-B : vagy nem June 8, 2025 at 3:53 PM, Varga Tamás Powder : Nem viszi be így se June 8, 2025 at 3:53 PM, Szücs Géza FT-B : látom, de nincs jogom manual order készítéshez June 8, 2025 at 3:55 PM, Szücs Géza FT-B : @Shakir (MCS) PS112-2503120038 Current location: E0CNVA12_P08 please recreate the order June 8, 2025 at 3:56 PM, Szücs Géza FT-B : destination is same June 8, 2025 at 3:59 PM, Szücs Géza FT-B : @Varga Tamás Powder megyen? June 8, 2025 at 3:59 PM, Shakir (MCS) : There is carrier on P07 blocking this carrier. June 8, 2025 at 4:00 PM, Varga Tamás Powder : Nem megy. Folyamatosan jön anyag de nem megy az AGV June 8, 2025 at 4:01 PM, Szücs Géza FT-B : u can change the carrier current location? June 8, 2025 at 4:02 PM, Varga Tamás Powder : Jelenleg a kettő porton is van anyag meg az RTV elött is van June 8, 2025 at 4:02 PM, Szücs Géza FT-B : P08on van rajta, ami neked kell a 11_P01re June 8, 2025 at 4:03 PM, Shakir (MCS) : I see PS112-2503120041 is located at P07. I need confirmation June 8, 2025 at 4:03 PM, Szücs Géza FT-B : P07ről leveszem June 8, 2025 at 4:03 PM, Szücs Géza FT-B : this correct June 8, 2025 at 4:03 PM, Szücs Géza FT-B : at now on P08 June 8, 2025 at 4:05 PM, Szücs Géza FT-B : megyek ürítem a p07et June 8, 2025 at 4:05 PM, Shakir (MCS) : There are two carrier At P07 - PS112-2503120041 At P08 - PS112-2503120037 Located June 8, 2025 at 4:09 PM, Shakir (MCS) : This message was deleted. June 8, 2025 at 4:10 PM, Szücs Géza FT-B : i. cant see the jobs in ACS June 8, 2025 at 4:11 PM, Shakir (MCS) : As soon as this carrier remove from the P07 and P08, Other job will move to P07 and P08. June 8, 2025 at 4:17 PM, Shakir (MCS) : AGV01 has been assigned On the way to E0PLA011_P01 Thank you June 8, 2025 at 4:21 PM, Shakir (MCS) : AGV02 has been assigned On the way to E0PLA021_P01 Thank you June 8, 2025 at 5:01 PM, Szücs Géza FT-B : all port and order is ok June 8, 2025 at 6:04 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.08 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 8, 2025 at 6:13 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 3 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+3: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 9, 2025 at 5:43 AM June 9, 2025 at 5:43 AM, Baek Hojong(백호종)FA : Day Shift 06.09 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 9, 2025 at 2:49 PM, Zagyva Tamás : 112-00237A out of stock? June 9, 2025 at 2:49 PM, Zagyva Tamás : @Shakir (MCS) ? June 9, 2025 at 2:49 PM, Shakir (MCS) : Checking June 9, 2025 at 2:52 PM, Shakir (MCS) : There is 100+ materials available June 9, 2025 at 2:53 PM, Zagyva Tamás : Ok June 9, 2025 at 2:56 PM, Zagyva Tamás : @Shakir (MCS) The materials are not available, please release them. June 9, 2025 at 2:57 PM, Shakir (MCS) : In which equipment you want the material June 9, 2025 at 2:57 PM, Shakir (MCS) : Provide me equipment id I will LR June 9, 2025 at 2:58 PM, Zagyva Tamás : E1PLA021_P02 June 9, 2025 at 2:59 PM, Zagyva Tamás : Did you think about that? June 9, 2025 at 2:59 PM, Shakir (MCS) : Checking LR June 9, 2025 at 3:00 PM, Shakir (MCS) : Please Press LR Last LR received at 14:37 job has been completed June 9, 2025 at 3:05 PM, Zagyva Tamás : And here?E1PLA011_P01 June 9, 2025 at 3:09 PM, Zagyva Tamás : I pressed the LR button on both ports, but no material is coming in. June 9, 2025 at 3:10 PM, Shakir (MCS) : We received LR multiple times but not successful because Material Definition id Invalid. June 9, 2025 at 3:13 PM, Zagyva Tamás : What can we do? June 9, 2025 at 3:13 PM, Sazzad Bhai SKon : Checking June 9, 2025 at 3:13 PM, Zagyva Tamás : Oke June 9, 2025 at 3:51 PM, Zagyva Tamás : @Marsi Gábor a koreaiak vissza irányítottak hozzátok,mert szerintük az automata raktár a baj June 9, 2025 at 3:56 PM, Farkas Tamàs : Megnézzük June 9, 2025 at 4:13 PM, Sazzad Bhai SKon : First carrier id starts with SP instead of PS. So, this is blocking according to RtD logic June 9, 2025 at 4:14 PM, Sazzad Bhai SKon : Solution 1: Update material information only for the SP carrier Solution 2: Manually transfer the SP material, after that PS will come automatically. @김주연 June 9, 2025 at 4:18 PM, 김주연 : We agreed to keep a logic (only PS material is auto transferrable) June 9, 2025 at 4:20 PM, 김주연 : @주범진 피엠님 SP 캐리어 반송 필요시 수동으로 진행 필요합니다. June 9, 2025 at 4:20 PM, Sazzad Bhai SKon : Okay, in that case I will manually transfer the first carrier SP. Then PS will be automatically transferred. @Zagyva Tamás Do you need the materials? June 9, 2025 at 4:21 PM, Zagyva Tamás : Yes June 9, 2025 at 4:27 PM, Shakir (MCS) : SP112-2503120103 has been released to E0CNVA12_P07. June 9, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13+2 Overtime Overtime (2):Csanálosi Gábor, Bonnyai Ákos Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Bonnyai Ákos, Csanálosi Gábor Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 9, 2025 at 6:05 PM, Varga Zoltán : Sziasztok poron anód raktárból kijött az anyag de AGV nem indult érte hogy levegye. Valószínűleg azért mert PS helyett SP -vel kezdődik a paletta azonosítója. Megnéznétek légyszi? Köszönöm June 9, 2025 at 6:10 PM, Dániel Hufnágel : @VK (mcs) Good evening! Can you make manual order for material SP112-2503120103 on port E0NCVA12_P07? June 9, 2025 at 6:10 PM, Dániel Hufnágel : Szia Azt tudjuk, hogy ez az anyag melyik portra kellene? June 9, 2025 at 6:12 PM, VK (mcs) : Where should I transfer it? As I see , this carrier transferred by request of operations a few hours ago. June 9, 2025 at 6:12 PM, Dániel Hufnágel : Just a minute! Thank you June 9, 2025 at 6:16 PM, Varga Zoltán : Előző műszak kérte ki de szerintem E1PLA021_P01 mehet June 9, 2025 at 6:18 PM, Dániel Hufnágel : @VK (mcs) So please transfer to the E1PLA021_P01 June 9, 2025 at 6:20 PM, VK (mcs) : Material identification for that port is PS but carrier ID on conveyor is SP. it’s better to send it back to warehouse June 9, 2025 at 6:21 PM, Dániel Hufnágel : Okey! June 9, 2025 at 6:22 PM, VK (mcs) : Transfer command created to STK A12. June 9, 2025 at 6:33 PM, Varga Zoltán : A raktár hiba jelzést adott ki: Tray data mismatch error June 9, 2025 at 6:34 PM, Dániel Hufnágel : Pillanat és megyünk June 9, 2025 at 6:35 PM, Csanálosi Gábor FA : Megyek June 9, 2025 at 6:59 PM, Dániel Hufnágel : Can you please re create the order? June 9, 2025 at 7:05 PM, VK (mcs) : I tried but it doesn’t work. Reply command is : one parameter is invalid. Can you transfer it manually. June 9, 2025 at 7:07 PM, Dániel Hufnágel : I will check what can i do June 9, 2025 at 7:30 PM, Dániel Hufnágel : Can you make a try again? June 9, 2025 at 7:35 PM, Sazzad Bhai SKon : @Dániel Hufnágel this is PS material but one manager changed it to SP June 9, 2025 at 7:37 PM, Dániel Hufnágel : Yes, and im trying to send back in to the storage June 9, 2025 at 7:38 PM, Sazzad Bhai SKon : Please ask manager @주범진 if you can use the material. According to MCS the material is good for E1PLA021_P02. Only prefix is Changed to SP June 9, 2025 at 7:42 PM, Janos R. MX SL : @장영환(Younghwan Chang) pls help us, Can we use those materials? June 9, 2025 at 8:13 PM, 주범진 : Yes we can use June 9, 2025 at 9:50 PM, Horváth Tamás : Poron anód oldalt kiállt hibára a technika a raktár elött.. elméletileg semmi nem zavarja. June 9, 2025 at 9:54 PM, Dániel Hufnágel : Lassan érkezem June 9, 2025 at 10:26 PM, (Unknown) left this chatroom. June 9, 2025 at 11:11 PM, VK (mcs) : @FA Please check Anode powder STK A11 port 4 Input H/S off error. June 10, 2025 at 1:05 AM June 10, 2025 at 1:05 AM, Horváth Tamás : Sziasztok. Megállt a robot az airshowerben anód oldalt a poron. June 10, 2025 at 1:13 AM, Szabadi Miki : Megyünk June 10, 2025 at 3:50 AM, Horváth Tamás : Katód oldalt megállt az air showernél bent a területen a robot a poron June 10, 2025 at 4:07 AM, Szabadi Miki : Megyünk June 10, 2025 at 5:47 AM, Zagyva Tamás : Jó reggelt! Poron anód oldalon nem sikerült levenni egész éjszaka az F.A-soknak egy raklapot.Majd kellene valamit kezdeni vele amikor ráértek. June 10, 2025 at 5:52 AM, Farkas Tamàs : Jó reggelt! Rendben hamarosan megyünk June 10, 2025 at 5:55 AM, Baek Hojong(백호종)FA : Day Shift 06.10 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 10, 2025 at 6:33 AM, Farkas Tamàs : Kész. Vissza lett küldve a raktárba és a polc le lett tiltva. A memóriába beírtuk, hogy “INCORRECT ID” June 10, 2025 at 6:38 AM, Zagyva Tamás : Köszönöm👍 June 10, 2025 at 7:03 AM, Farkas Tamàs : AN During powder loading, the pallet loaded with SP ID was sent back to warehouse 2 to shelf 0202402. The shelf was disabled and "incorrect ID" was entered into the memory. June 10, 2025 at 2:16 PM, JAEYOON KIM / CS invited KANG HEEDOO[강희두]/CS. June 10, 2025 at 6:07 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 10, 2025 at 7:52 PM, Varga Zoltán : Sziasztok poron anód területen AGV #2 megállt nézzétek meg légyszi köszönöm June 10, 2025 at 7:53 PM, Szabadi Miki : Nemsoká megyünk June 11, 2025 at 12:12 AM June 11, 2025 at 12:12 AM, Varga Zoltán : AGV #2 lift pos abnormal hibával áll az anód raktárnál. Megnéznétek légyszi? Köszi June 11, 2025 at 12:12 AM, Szabadi Miki : Igen nemsoká megyünk June 11, 2025 at 1:06 AM, Horváth Tamás : Sziasztok megállt a robot anod oldalt a poron. Bent. June 11, 2025 at 1:11 AM, Szabadi Miki : Megyünk June 11, 2025 at 3:13 AM, Horváth Tamás : Sziasztok. Megállt a robot az anód air showerbe a poron. June 11, 2025 at 3:16 AM, Kiss Balázs F.A. : Megyek June 11, 2025 at 8:35 AM, Varga Tamás Powder : Sziasztok. A poron anod raktárban az AGV megállt. No Scan from front scanner hiba lépett fel. Megtudnátok nézni? Köszönöm June 11, 2025 at 8:41 AM, Rácz Dániel / FA : Jövök June 11, 2025 at 9:08 AM, Rácz Dániel / FA : Kész June 11, 2025 at 9:13 AM, Kokhan Yurii : Köszönöm June 11, 2025 at 9:22 AM, Kokhan Yurii : Sziasztok. Megállt a robot az anód air showerbe a poron. Nézzétek meg légyszíves. Köszönöm June 11, 2025 at 9:26 AM, Szücs Géza FT-B : @Pálosi Róbert vagy @Czeilinger Krisztián valamelyikőtök javítása a hibát llgyszives June 11, 2025 at 10:42 AM, 윤경환 : @FA Hello. Anode warehouse scanner is not working. Please check it. June 11, 2025 at 10:52 AM, Szücs Géza FT-B : 1For GF? June 11, 2025 at 11:02 AM, 윤경환 : Gf June 11, 2025 at 11:08 AM, Rácz Dániel / FA : I coming June 11, 2025 at 11:17 AM, Fábián Anna 언너 invited Beatrix. June 11, 2025 at 11:18 AM, Fábián Anna 언너 : . June 11, 2025 at 11:19 AM, Yoon : plz check the RTV to railroad. the material can not move to stacker rail June 11, 2025 at 11:29 AM, Szücs Géza FT-B : some questons, AN or CA? GF or 1F? June 11, 2025 at 11:30 AM, Rácz Dániel / FA : CV13-001 pallet over size alarm June 11, 2025 at 11:32 AM, Rácz Dániel / FA : @Böröcz Tamás solved. Szenzort probléma volt. Beállítva. June 11, 2025 at 11:34 AM, 윤경환 : Anode GF. June 11, 2025 at 11:37 AM, Rácz Dániel / FA : Solved, sensor position problem. Setting. June 11, 2025 at 11:42 AM, 윤경환 : Thank you.👍 June 11, 2025 at 11:43 AM, Yoon : GF now June 11, 2025 at 11:55 AM, Fábián Anna 언너 : @FA Sziasztok, anod foldszinten megint megakadt ugyanúgy June 11, 2025 at 11:56 AM, Beatrix : Hello! There is a problem again. The material stucked between the conveyor and the RTV. Anode side GF. June 11, 2025 at 12:01 PM, Szücs Géza FT-B : úton June 11, 2025 at 12:52 PM, Szücs Géza FT-B : kész June 11, 2025 at 12:55 PM, Beatrix : Sajnos megint előállt a probléma, pár raklap után June 11, 2025 at 12:57 PM, Szücs Géza FT-B : ejj, visszaindulok June 11, 2025 at 1:14 PM, Szücs Géza FT-B : kész ismét June 11, 2025 at 1:51 PM, Beatrix : Sziasztok! Most a probléma a szalaggal van. Elakadt a raklap June 11, 2025 at 1:58 PM, Szücs Géza FT-B : @Pálosi Róbert -tel úton vagyunk June 11, 2025 at 2:47 PM, Beatrix : Hello! Cathode - [F0545] CV09-005 Data miss match alarm [F0949] RTV Tray Data Mismatch error June 11, 2025 at 2:50 PM, Szücs Géza FT-B : úton June 11, 2025 at 3:10 PM, duzzaman Md (MCS) : @FA Please check E0STKC11_P01 Data missmatch error Thank you June 11, 2025 at 3:28 PM, Varga Tamás Powder : Hello, who sent the cp3k out of the warehouse? we don't need this material June 11, 2025 at 3:31 PM, Szücs Géza FT-B : ez is kész June 11, 2025 at 3:36 PM, Szücs Géza FT-B : ez is done June 11, 2025 at 3:42 PM, Varga Tamás Powder : @duzzaman Md (MCS) June 11, 2025 at 3:43 PM, Varga Tamás Powder : Please delete the task. June 11, 2025 at 3:47 PM, duzzaman Md (MCS) : Please provide us more info ? Should we delete both those are going to E1PLA031 and E1PLA041 June 11, 2025 at 3:49 PM, Varga Tamás Powder : Yes June 11, 2025 at 4:00 PM, Varga Tamás Powder : Sziasztok. A poron anod oldalt a raktárban az AGV megállt. Megtudnátok nézni? Köszönöm June 11, 2025 at 4:01 PM, Szücs Géza FT-B : @Rácz Dániel / FA @Pálosi Róbert @Czeilinger Krisztián valaki nézze meg légyszives June 11, 2025 at 4:04 PM, Rácz Dániel / FA : Megyek June 11, 2025 at 4:06 PM, duzzaman Md (MCS) : Job were getting generated automatically. Cancelled those and sent back to stk. June 11, 2025 at 4:07 PM, Varga Tamás Powder : Thank you very much June 11, 2025 at 4:31 PM, Rácz Dániel / FA : @duzzaman Md (MCS) now moving the AGV’s June 11, 2025 at 5:39 PM, Rácz Dániel / FA : Now ready. Thank you for support Mr@MrMCS June 11, 2025 at 5:43 PM, Rácz Dániel / FA : Kész, jó pihenést ! 😎 June 11, 2025 at 5:44 PM, Rácz Dániel / FA : @Varga Tamás Powder köszönöm a segítséged ! 🤗 June 11, 2025 at 6:04 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— June 11, 2025 at 6:24 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.11 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 11, 2025 at 7:23 PM, Powder tréner : Sziasztok,Katod RTV kocsin elakadt egy raklap (Data loss error,dara mismatch error)Nézzétek rá. Köszönöm. June 11, 2025 at 7:24 PM, adambenczik : Megyünk June 11, 2025 at 10:36 PM, (Unknown) left this chatroom. June 12, 2025 at 6:08 AM June 12, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.12. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 12, 2025 at 8:06 AM, KIM SEYEON [김세연]_FA : @윤경환 조장님 금일 분체자재 입고 있나요? June 12, 2025 at 8:09 AM, 윤경환 : 안녕하세요 피엠님 음극 있습니다. June 12, 2025 at 8:10 AM, KIM SEYEON [김세연]_FA : 몇시부터 하시는지 알려주시면 모니터링하겠습니다. June 12, 2025 at 8:11 AM, 윤경환 : 8:30분 도착 16:00도착 예정 2대 있는데 하역하면 9:00부터 시작 할것 같습니다. June 12, 2025 at 8:16 AM, KIM SEYEON [김세연]_FA : 넵 June 12, 2025 at 8:21 AM, Kokhan Yurii : Sziasztok A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 12, 2025 at 8:27 AM, Varga Tamás Powder : Sziasztok a poron katod oldalt a raktárban is megállt az AGV. Fényfüggöny hiba van. Megnéznétek? Köszönöm June 12, 2025 at 8:35 AM, Szücs Géza FT-B : @Rácz Dániel / FA légyszives June 12, 2025 at 8:40 AM, Rácz Dániel / FA : Mi most megyünk vissza press/sluttre @Pálosi Róbert fog kijönni szünetre. Sorry June 12, 2025 at 8:41 AM, Pálosi Róbert : 9-kor June 12, 2025 at 8:41 AM, Rácz Dániel / FA : Köszi June 12, 2025 at 8:49 AM, Szücs Géza FT-B : vagy onkább most June 12, 2025 at 8:51 AM, Böröcz Tamás : Úgy sose fogunk termelési bónuszt kapni June 12, 2025 at 8:51 AM, Szücs Géza FT-B : így sem June 12, 2025 at 8:52 AM, Szücs Géza FT-B : ellenben béremelésnél, ha lesz, a 0%-3%-5%-7% százalékos skálán a 0 felé ficcen erősen, ju nó? June 12, 2025 at 8:54 AM, Denkó Jani (F.A.) : Az idei béremeléssel a tavalyi évi munkád után vagy értékelve (tehát azt már ki termeltük) max jövőre (se) nem lesz 🫡🫣😂😂😂😂 June 12, 2025 at 9:04 AM, Kokhan Yurii : Meg mennyi idő várni? June 12, 2025 at 9:06 AM, Szarka Adrián : Sziasztok tudtok menni porra segíteni ? 8:21 kor kért az Sl segítséget June 12, 2025 at 9:07 AM, Kokhan Yurii : Most itt van June 12, 2025 at 11:25 AM, Rácz Dániel / FA : @Szücs Géza FT-B most indulok elektródáról June 12, 2025 at 11:28 AM, Szücs Géza FT-B : köszönöm, 11:40-re UT is ott lesz June 12, 2025 at 11:32 AM, Szarka Adrián : @Szücs Géza FT-B szeretnénk segítséget kérni a porra, hogy meg ne álljon a termelés a Mixingen, mert ki kérték az anyagot fent a srácok, és error üzenet van és a fenti FA Kollega nem tudja hogy kell megoldani. Légyszíves küldj valakit vagy gyere te. Nagyon szépen köszönöm. June 12, 2025 at 11:33 AM, Szücs Géza FT-B : de Dani már úton van June 12, 2025 at 11:33 AM, Szarka Adrián : Köszönöm szépen June 12, 2025 at 11:56 AM, Yoon : @FA 시너스텍 콜대응인원 2. 기구 : 이주상님 연락처 있으면 공유 부탁드려요 June 12, 2025 at 12:05 PM, KIM SEYEON [김세연]_FA : @Lee Junghan(이정한)_CS 매니저님 혹시 기구인원 분체 보내주실수 있을까요? @Yoon 피엠님 혹시 어떤 문제인가요? 간단히라도 남겨주세요. June 12, 2025 at 12:06 PM, Lee Junghan(이정한)_CS : 네 알겠습니다. June 12, 2025 at 12:07 PM, Varga Tamás Powder : @Shakir (MCS) Hello, I need this material: Catode 111-00150A 10 paletts Thank you very much June 12, 2025 at 12:10 PM, Lee Junghan(이정한)_CS : 제가 다시 가보겠습니다 June 12, 2025 at 12:11 PM, Shakir (MCS) : Working June 12, 2025 at 12:11 PM, Shakir (MCS) : On it June 12, 2025 at 12:13 PM, Varga Tamás Powder : @Shakir (MCS) only sends to port P07 only June 12, 2025 at 12:13 PM, Yoon : 문제는 아니고 저희가 자재를 반일할때 rtv에서 스태커 라인으로 옮겨줄때 자재가 걸리는 현상이 있어서 오늘 이주상님께서 현장보고 오셨디고 해서 관련사항 몇가지 문의드리려고 합니다. 해당 방 인원중에 제가 찾지 못해서 혹시 연락처 있으신분 있나해서 여쭤 봤습니다. June 12, 2025 at 12:22 PM, Lee Junghan(이정한)_CS : 지금 제가 분체에 있습니다. 혹, 안계시면 식사후 만나뵙지요 June 12, 2025 at 12:23 PM, Yoon : 제기 오후에 회의가 있어서 2시 이후에 시간 될것 같습니다. 제가 분체창고 갈때 다시 회신드리겠습니다. June 12, 2025 at 12:23 PM, Lee Junghan(이정한)_CS : 개인톡으로 이주상대리 연락처 남겼습니다. June 12, 2025 at 12:23 PM, Yoon : 넵 확인했습니다. 감사합니다 June 12, 2025 at 12:24 PM, Lee Junghan(이정한)_CS : 일단 통화해보시고 필요하시면 연락 주세요 June 12, 2025 at 12:28 PM, Shakir (MCS) : This message was deleted. June 12, 2025 at 12:28 PM, Shakir (MCS) : Already there is automatic job creation for this materials . June 12, 2025 at 12:31 PM, Varga Tamás Powder : since it is not good, you have to ask for the material in the air shower manual June 12, 2025 at 12:33 PM, Sazzad Bhai SKon : Okay we'll transfer manually June 12, 2025 at 12:34 PM, Sazzad Bhai SKon : And delete previous jobs June 12, 2025 at 12:34 PM, Pálosi Róbert : Mire jött, megoldottam June 12, 2025 at 1:20 PM, Szücs Géza FT-B : @Rácz Dániel / FA June 12, 2025 at 1:21 PM, Rácz Dániel / FA : Itt vannak a utilitysek June 12, 2025 at 1:22 PM, Szücs Géza FT-B : úton vagyok és váltalak June 12, 2025 at 1:22 PM, Rácz Dániel / FA : Köszi June 12, 2025 at 1:22 PM, Szücs Géza FT-B : csak nincs energia ital az otomatikában June 12, 2025 at 1:23 PM, Szücs Géza FT-B : a béjáratnál, ami kijárat is de nem vész June 12, 2025 at 1:43 PM, Rácz Dániel / FA : @gyerek a porra @Szücs Géza FT-B utility megoldotta az ajtó hibát a CA oldalon June 12, 2025 at 2:02 PM, Szücs Géza FT-B : vagy nem June 12, 2025 at 3:57 PM, Varga Tamás Powder : @Shakir (MCS) Hello, I need this material: Catode 111-00150A 10 paletts Thank you very much Sziasztok segitséget szeretnék kérni az anyagok leszedésére. Köszönöm June 12, 2025 at 3:57 PM, Shakir (MCS) : Working on it June 12, 2025 at 3:58 PM, Kokhan Yurii : @Szücs Géza FT-B June 12, 2025 at 4:03 PM, Szücs Géza FT-B : @Pálosi Róbert úton van June 12, 2025 at 4:06 PM, Rácz Dániel / FA : Köszi June 12, 2025 at 4:07 PM, Shakir (MCS) : @Fa Please check E0STKC12, Hoist time over error. Thank you June 12, 2025 at 4:21 PM, Shakir (MCS) : Plates have been released. Thank you June 12, 2025 at 4:22 PM, Szücs Géza FT-B : working. Thanks for @Csanálosi Gábor FA June 12, 2025 at 5:37 PM, Csanálosi Gábor FA : @Shakir (MCS) can you pls check PS112-2503210074 ? Crane has load size information error. Possibly need to check pallet size. June 12, 2025 at 6:01 PM, Shakir (MCS) : @VK (mcs) June 12, 2025 at 6:11 PM, VK (mcs) : Everything on MCS side is normal. June 12, 2025 at 6:12 PM, Nazirov Eldar : Sziasztok szeretnék kérni segítség Katód oldalon kézzel kell kiszedni anyagot köszönöm June 12, 2025 at 6:13 PM, Mr.Miti (미티) FA : Érkezünk June 12, 2025 at 6:16 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(3): Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— June 12, 2025 at 6:43 PM, adambenczik : Itt vagyunk June 12, 2025 at 7:30 PM, VK (mcs) : @FA Please check Anode powder STKA13 Load size information error. June 12, 2025 at 7:35 PM, Mr.Miti (미티) FA : It has not been forgotten. There is something else in order of priorities. As soon as the other work is completed, we will take care of it. Thank you very much for your hard work! June 12, 2025 at 7:36 PM, VK (mcs) : Thanks for confirmation June 12, 2025 at 7:36 PM, Powder tréner : @VK(mcs) Hello, I would like to request the following material 111-00150A for cathode powder, 20 pallets. June 12, 2025 at 7:37 PM, Mr.Miti (미티) FA : Me to! June 12, 2025 at 7:44 PM, VK (mcs) : Materials have been released. June 12, 2025 at 9:48 PM, Mr.Miti (미티) FA : Solved. (thumbsup) June 13, 2025 at 12:34 AM June 13, 2025 at 12:34 AM, Nazirov Eldar : Sziasztok szeretnék kérni segítség Anód oldalon raktár előtt áll AGV Megtudjátok nézni köszönöm June 13, 2025 at 12:36 AM, adambenczik : Megyünk hamarosan June 13, 2025 at 1:19 AM, cehmannzsoltcehmann : Kész June 13, 2025 at 1:29 AM, Nazirov Eldar : Köszönjük June 13, 2025 at 6:07 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.13 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 13, 2025 at 9:13 AM, Powder tréner : Hello! I would like to ask for these materials: 111-00150A for cathode powder, 15 pallets. June 13, 2025 at 9:14 AM, Shakir (MCS) : Working on it June 13, 2025 at 9:14 AM, Powder tréner : Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm. June 13, 2025 at 9:15 AM, Marsi Gábor : Megyek June 13, 2025 at 9:25 AM, Shakir (MCS) : I am releasing pallets to E0CNVC12_07 June 13, 2025 at 9:36 AM, Shakir (MCS) : 15 pallets released Thank you June 13, 2025 at 9:37 AM, Zagyva Tamás : Thank you June 13, 2025 at 9:37 AM, Shakir (MCS) : You’re welcome June 13, 2025 at 9:55 AM, Powder tréner : This message was deleted. June 13, 2025 at 9:56 AM, Shakir (MCS) : Working on it June 13, 2025 at 9:58 AM, Powder tréner : Sorry, I wrote in the wrong place June 13, 2025 at 9:58 AM, Shakir (MCS) : Okay June 13, 2025 at 2:47 PM, Powder tréner : Hello! I would like to ask for these materials: 111-00150A for cathode powder, 10 pallets. June 13, 2025 at 2:47 PM, Shakir (MCS) : Working on it June 13, 2025 at 2:47 PM, Powder tréner : Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm. June 13, 2025 at 2:50 PM, Farkas Tamàs : Rendben, megyünk June 13, 2025 at 2:51 PM, Powder tréner : Okés köszi June 13, 2025 at 3:08 PM, Shakir (MCS) : There is only 4 pallets available June 13, 2025 at 3:09 PM, Powder tréner : Okay June 13, 2025 at 3:31 PM, Shakir (MCS) : 4 pallets released June 13, 2025 at 3:34 PM, 윤경환 : Do you need it? June 13, 2025 at 3:42 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs air shower is not recovered yet? June 13, 2025 at 3:52 PM, Farkas Tamàs : not yet! they are currently working on it June 13, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 13, 2025 at 7:11 PM, Varga Zoltán : Sziasztok poron katód #1 sornál AGV #3 megállt megnéznétek légyszi June 13, 2025 at 7:13 PM, Oláh András : Megyünk June 13, 2025 at 8:37 PM, Varga Zoltán : Megint... Megnéznétek légyszi köszönöm June 13, 2025 at 8:40 PM, Oláh András : Megyünk megint 😅 June 14, 2025 at 12:58 AM June 14, 2025 at 12:58 AM, Varga Zoltán : Hello AGV #2 megállt a raktár előtt nézzétek meg légyszi köszönöm June 14, 2025 at 12:59 AM, Szabadi Miki : Mindjárt megyünk June 14, 2025 at 5:03 AM, Varga Zoltán : Hello anód #4-nél agv #3 megállt mert útjában volt a mellette lévő portban a paletta. Megnéznétek? Köszönöm June 14, 2025 at 6:07 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.14 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 14, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 14, 2025 at 8:43 PM, Varga Zoltán : Sziasztok poron anód raktár fény függöny hibát jelez és AGV nem veszi ki az anyagot. Megnéznétek légyszi köszönöm June 14, 2025 at 8:44 PM, Oláh András : Kis türelem mindjárt megyünk June 15, 2025 at 1:55 AM June 15, 2025 at 1:55 AM, Horváth Tamás : Anód oldalt megállt a robot. Bent a területen a porom June 15, 2025 at 1:55 AM, Horváth Tamás : Poron June 15, 2025 at 1:56 AM, Szabadi Miki : Megyünk June 15, 2025 at 2:49 AM, Varga Zoltán : Helló katód raktárból nem veszi ki az anyagot az #1 AGV megnéznétek légyszi? June 15, 2025 at 2:50 AM, Varga Zoltán : Lift Pos abnormal June 15, 2025 at 2:50 AM, Szabadi Miki : Már indulunk is vissza June 15, 2025 at 7:21 AM, Rózsavölgyi Attila : Hali a katod por Alapanyag raktár folyamatosan hibát jelez nézzétek meg. Hiba [CV13-101] Data Mismatch Error Köszi June 15, 2025 at 7:22 AM, Marsi Gábor : Megnézzük June 15, 2025 at 7:38 AM, Marsi Gábor : Kész June 15, 2025 at 7:50 AM, Zagyva Tamás : Kösz👍 June 15, 2025 at 4:38 PM, 임종현(JongHyun Lim) : @Zagyva Tamás Kérem a katód por betöltését a 3-4-es hopperbe. Umicore LOT ID: 31100172JF500001 ~ 10 Anyagkód: 311-00172J Teljes mennyiség: 5000 kg Ez a por a 4M-hez van, ezért mindenképp a 3-4-esbe kell betölteni. June 15, 2025 at 5:57 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Kiss Balázs, Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 15, 2025 at 11:01 PM, Varga Zoltán : Sziasztok poron katód területen AGV #1 megállt nézzétek meg légyszi köszönöm June 15, 2025 at 11:04 PM, Horváth Tamás : Látjuk😄 June 15, 2025 at 11:46 PM, Horváth Tamás : Katódon megállt a robot. Bent June 15, 2025 at 11:48 PM, Dániel Hufnágel : Okés June 16, 2025 at 2:11 AM June 16, 2025 at 2:11 AM, Horváth Tamás : Megállt a robot.. anód air showerbe a poron June 16, 2025 at 2:12 AM, Szabadi Miki : Nemsoká megyünk June 16, 2025 at 2:12 AM, Horváth Tamás : Ok June 16, 2025 at 3:11 AM, Varga Zoltán : Katód raktár előtt megállt AGV #3. Megnézitek légyszi? June 16, 2025 at 3:11 AM, Szabadi Miki : Akkor megyünk vissza June 16, 2025 at 3:15 AM, Dániel Hufnágel : Már megy az AGV June 16, 2025 at 3:15 AM, Dániel Hufnágel : Ne menjetek June 16, 2025 at 3:15 AM, Oláh András : Már mind1 June 16, 2025 at 4:39 AM, Varga Zoltán : Sziasztok poron anód air showernél megállt AGV #3 shower timeout hibával nézzétek meg légyszi köszönöm June 16, 2025 at 4:40 AM, Varga Zoltán : Szuper köszi June 16, 2025 at 4:41 AM, Dániel Hufnágel : Igazán nincs mit June 16, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 16, 2025 at 2:21 PM, Nazirov Eldar : Sziasztok szeretnék kérlek segítséget nem tudjuk kérni anyagot a Katód raktáron a (E1PLC021_P02) - (E1PLC021_P01) portokra köszönöm June 16, 2025 at 6:04 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 FA, June 16, 2025 at 6:27 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Takarítás Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 June 16, 2025 at 6:52 PM, Kokhan Yurii : Sziasztok A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 16, 2025 at 6:56 PM, Rácz Dániel / FA : Megyek 😢 June 16, 2025 at 7:03 PM, Zulaa/졸라/Ivancsa FA left this chatroom. June 17, 2025 at 3:01 AM June 17, 2025 at 3:01 AM, Kokhan Yurii : Sziasztok A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 17, 2025 at 3:04 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Nézzétek meg légyszíves ! 🙏 June 17, 2025 at 3:04 AM, Czeilinger Krisztián : Úton vagyunk. June 17, 2025 at 3:05 AM, Czeilinger Krisztián : Megyünk. June 17, 2025 at 6:04 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 11:19 AM, Shakir (MCS) : @FA Please check E0STKA12_C01, Load Size information error. Thank you June 17, 2025 at 11:22 AM, Molnár Ferenc : Sziasztok! Elektróda raktár földszinten anód oldalon nem megy az STK-A2 daru. 145 load size error June 17, 2025 at 11:22 AM, Molnár Ferenc : Segítséget kérek June 17, 2025 at 11:23 AM, Mr.Miti (미티) FA : Megyek June 17, 2025 at 11:24 AM, Molnár Ferenc : Köszönöm June 17, 2025 at 1:31 PM, 윤경환 : @Baek Hojong(백호종)FA 피엠님 안녕하세요. 음극분체 스태커 2호기 로드 사이즈 에러 발생 했습니다. 금일 창고에 투입 시킬 자재가 많습니다. 빠른 확인 부탁 드리겠습니다. June 17, 2025 at 1:35 PM, Baek Hojong(백호종)FA : @Mr.Miti (미티) FA Please check the anode power crane 2 error June 17, 2025 at 1:42 PM, Molnár Ferenc : Helló! Elektróda raktár földszinten anód oldalon megállt az betöltés. RTV-CV01 röl 01_010 CV_012 nél lost data. June 17, 2025 at 1:42 PM, Molnár Ferenc : Segítséget kérek June 17, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.17 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(1): Szabadi Miklós Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(5): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (2): Csanálosi Gábor, Takács Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 17, 2025 at 6:18 PM, Kokhan Yurii : Sziasztok,poron katod raktáron megálltak a AGV k. June 17, 2025 at 6:18 PM, Kokhan Yurii : Nézzétek meg légyszíves. Köszönöm June 17, 2025 at 6:20 PM, Szücs Géza FT-B : már úton voltam, de vissza kell fordulnom, srácok érkezni fognak June 17, 2025 at 7:23 PM, Varga Tamás Powder : @VK (mcs) hello on the powder cathode side on line 3 the E1PLC031-P01 powder indicates that the material is out of stock. (Umicore). would you take a look? thank you June 17, 2025 at 7:25 PM, VK (mcs) : There are 79 And one of them are on the way by AGV #3 June 17, 2025 at 7:37 PM, Varga Tamás Powder : Sziasztok.A poron Katod oldalt a 3as sornál megállt az AGV. Megtudnátok nézni? Kőszönöm June 17, 2025 at 7:42 PM, Szücs Géza FT-B : hamarosan érkezik a segítség June 17, 2025 at 7:44 PM, Szarka Adrián invited Hári Zoltàn. June 17, 2025 at 7:44 PM, Szarka Adrián invited Kurgya Attila. June 17, 2025 at 8:22 PM, Varga Tamás Powder : A poron katod 3as sornál letette a palettát az AGV és kiált hibára. Megnéznétek? Köszönöm June 17, 2025 at 8:28 PM, Rácz Dániel / FA : Boeing June 17, 2025 at 9:10 PM, Varga Tamás Powder : A poron katod raktárban nem veszi le az anyagot, várakozó állásban van. Megtudnátok nézni? Köszönöm June 17, 2025 at 9:13 PM, Böröcz Tamás : Újra tudnátok indítani a CVt? June 17, 2025 at 10:32 PM, Varga Tamás Powder : Nem jó úgy se June 17, 2025 at 10:33 PM, Varga Tamás Powder : Légyszives nézzétek meg mert ide odq mennek az AGV-k a katod raktárba 🤣🤣🤣 June 17, 2025 at 10:41 PM, Kokhan Yurii : ??? June 17, 2025 at 10:47 PM, Kokhan Yurii : Tud valaki jönni? June 17, 2025 at 10:51 PM, Szücs Géza FT-B : úton vagyunk June 17, 2025 at 10:52 PM, Szücs Géza FT-B : Elnézést, elektródán bent volt mindenki a sok munkában June 17, 2025 at 11:23 PM, Szücs Géza FT-B : kész, egy időre June 17, 2025 at 11:26 PM, Kokhan Yurii : Köszönöm June 18, 2025 at 12:51 AM June 18, 2025 at 12:51 AM, Kokhan Yurii : Sziasztok,poron katod oldal megálltak a AGV . Nézzétek meg légyszíves. Köszönöm June 18, 2025 at 12:58 AM, Szabadi Miki : Megyünk June 18, 2025 at 1:21 AM, Kokhan Yurii : Anod airshover agv megal June 18, 2025 at 1:23 AM, Kokhan Yurii : Tudz valaki nézni? June 18, 2025 at 1:24 AM, Rácz Dániel / FA : Én tudok June 18, 2025 at 1:24 AM, Rácz Dániel / FA : Csak valaki csinálja meg a hibát 😉 June 18, 2025 at 1:25 AM, Böröcz Tamás : RIP June 18, 2025 at 1:40 AM, Varga Tamás Powder : A poron anod air showerben megállt az AGV. Megtudnátok nézni? Köszönöm June 18, 2025 at 1:53 AM, Rácz Dániel / FA : Kész June 18, 2025 at 1:54 AM, Kokhan Yurii : Köszönöm June 18, 2025 at 1:57 AM, Varga Tamás Powder : Anod oldalt a raktárban nem veszi le az anyagot. Megtudnátok nézni? Köszönöm😇 June 18, 2025 at 1:58 AM, Rácz Dániel / FA : Jövünk June 18, 2025 at 1:59 AM, Varga Tamás Powder : Meg az anod air showernél megállt az AGV, és nyitva is van a kapu. Csak a hegye lóg be az air showerbe 🤣 June 18, 2025 at 2:07 AM, Rácz Dániel / FA : Itt vagyunk perez June 18, 2025 at 2:27 AM, Varga Tamás Powder : Anod oldalt az air showerben megállt az AGV😅 légyszives nézzétek meg. Köszönöm😇 June 18, 2025 at 2:32 AM, Varga Tamás Powder : És az anod raktárban is megállt az AGV. Nem tudja a pozícióját June 18, 2025 at 2:44 AM, Rácz Dániel / FA : Megyúnk June 18, 2025 at 2:55 AM, Rácz Dániel / FA : Kész June 18, 2025 at 6:31 AM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.18 Time: 06:00~ 18:00 1. 백호종PM Baek Hojong 2. Assy 이민재(Lee minjae) June 18, 2025 at 12:01 PM, Powder tréner : Hali a por katod oldalon az 1-es AGV kiált hibára az alapanyag raktárnál nem vete le a raklapot nézétek meg légyszíves. Köszönöm. June 18, 2025 at 12:01 PM, Farkas Tamàs : Megyünk June 18, 2025 at 2:18 PM, Lee Junghan(이정한)_CS : @Mohammad Amir POWDER AN GF, UNK PS112-2504010034 on shelf 02-023-04 at E0STK11 warehouse looks like the wrong carrier ID. Can you move it to the port? I'll check it out. June 18, 2025 at 2:19 PM, Mohammad Amir : Sure Sir,checking. June 18, 2025 at 2:20 PM, Mohammad Amir : Sir, Please confirm,would you like to receive this carrier at GF CNVA11 ,Manual ports ? Thank you! June 18, 2025 at 2:21 PM, Lee Junghan(이정한)_CS : Wait please. June 18, 2025 at 2:21 PM, Mohammad Amir : Sure Sir,I am waiting. June 18, 2025 at 2:24 PM, Mohammad Amir : Sir, For your information:- This carrier has been stored as Duplicated carrier in STKA11(0202304) with id UNKDUP-PS112-2504010034-5675015190073231. And original id ,PS112-2504010034 is currently stored in STKA13(0202006). Thank you very much! June 18, 2025 at 2:31 PM, Lee Junghan(이정한)_CS : i thank it should be changed to ,PS112-2504010065 June 18, 2025 at 2:32 PM, Lee Junghan(이정한)_CS : 또한 방금 작업자가 1번 창고로 입고한 화물 (PS112-250410065) 을 다른 화물 이름(PS112-250410034)으로 복사해서 넣은것 같습니다 June 18, 2025 at 2:33 PM, Lee Junghan(이정한)_CS : Yesterday. I got message June 18, 2025 at 2:33 PM, Lee Junghan(이정한)_CS : That's why i want to check June 18, 2025 at 2:34 PM, Mohammad Amir : Sir, I will suggest you that I take it out from Manual port and Rack in again . This will be the best solution. Thank you very much! June 18, 2025 at 2:34 PM, Lee Junghan(이정한)_CS : Yes. I agree June 18, 2025 at 2:34 PM, Mohammad Amir : Sure Sir, Please tell me which Manual port you would like to receive,I will send it there. Thank you very much! June 18, 2025 at 2:36 PM, Lee Junghan(이정한)_CS : E0CNVA11_M03 is more good June 18, 2025 at 2:36 PM, Mohammad Amir : Sure Sir,I am working on it. June 18, 2025 at 2:36 PM, Lee Junghan(이정한)_CS : Thanks June 18, 2025 at 2:37 PM, Mohammad Amir : This message was deleted. June 18, 2025 at 2:38 PM, Mohammad Amir : Sir, Currently M03 is set to IN direction, please make it OUT way so that carrier can be delivered there. . Thank you very much! June 18, 2025 at 2:39 PM, Lee Junghan(이정한)_CS : I don't know if we can use M1/M2 for GF now. Can you send it to 1F? June 18, 2025 at 2:40 PM, Mohammad Amir : Sure Sir, I can transfer to 1F ,in this case you will receive the carrier at E0CNVA12_P07. Is it good ,Sir? Thank you! June 18, 2025 at 2:40 PM, Lee Junghan(이정한)_CS : On MCS, M03 is type OUT poet June 18, 2025 at 2:41 PM, Lee Junghan(이정한)_CS : Isn't it? June 18, 2025 at 2:41 PM, Mohammad Amir : Sir, As I checked, Currently E0CNVA11_M03 is set to IN way. Thank you! June 18, 2025 at 2:42 PM, Lee Junghan(이정한)_CS : Yes. That is CA June 18, 2025 at 2:42 PM, Lee Junghan(이정한)_CS : Ok June 18, 2025 at 2:42 PM, Lee Junghan(이정한)_CS : Send 1F June 18, 2025 at 2:42 PM, Mohammad Amir : Sure Sir, working on it. June 18, 2025 at 2:45 PM, Mohammad Amir : Sir, Job has been created successfully ✅ Carrier is on its way to E0CNVA12_P07 for inspection. Please collect it. Thank you very much! June 18, 2025 at 2:47 PM, Lee Junghan(이정한)_CS : PS112-2504010008? June 18, 2025 at 2:48 PM, Lee Junghan(이정한)_CS : I need to check UNK PS112-250410034 June 18, 2025 at 2:48 PM, Lee Junghan(이정한)_CS : Ok i got it June 18, 2025 at 2:49 PM, Mohammad Amir : This message was deleted. June 18, 2025 at 2:49 PM, Mohammad Amir : Yes Sir, Carrier is now on RTV you will receive it soon. Thank you! June 18, 2025 at 2:50 PM, Lee Junghan(이정한)_CS : This message was deleted. June 18, 2025 at 2:50 PM, Lee Junghan(이정한)_CS : The actual ID is PS112-250410065 June 18, 2025 at 2:51 PM, Lee Junghan(이정한)_CS : i will put on P08 June 18, 2025 at 3:51 PM, Lee Junghan(이정한)_CS : The UNK disappeared and was normally stocked. June 18, 2025 at 3:52 PM, Mohammad Amir : Thank you very much for the confirmation,Sir! June 18, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (1):Böröcz Tamás Sick (0):- Holiday (1): Kovács Szabolcs, Magyar Balázs Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András , Kiss Balázs , Böröcz Tamás Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 18, 2025 at 6:36 PM, Horváth Tamás : Katód oldalt meg állt a raktárnál a poron✌️ June 18, 2025 at 6:36 PM, Horváth Tamás : A robot😅 June 18, 2025 at 6:38 PM, Szabadi Miki : Igen mindjárt megyünk June 18, 2025 at 7:05 PM, Varga Zoltán : Sziasztok megint gond van katód #2 nél June 18, 2025 at 7:06 PM, Varga Zoltán : Nem jön ki a paletta alól #1 AGV June 18, 2025 at 7:16 PM, Varga Zoltán : Sajnos egész katód töltése áll ez miatt June 18, 2025 at 7:18 PM, Szabadi Miki : Megyünk June 18, 2025 at 7:18 PM, Horváth Tamás : Hali katódon a poron megállt bent a technika.. hátráltatja a töltést. Nekünk meg nyomni kellene June 18, 2025 at 7:52 PM, Varga Zoltán : Robot megállt katód 1-3 között June 18, 2025 at 7:52 PM, Szabadi Miki : Már bent is vagyunk June 18, 2025 at 8:24 PM, Horváth Tamás : Katódon megállt bent a robot June 18, 2025 at 8:24 PM, Horváth Tamás : Poron June 18, 2025 at 8:24 PM, Szabadi Miki : Megyünk már be June 18, 2025 at 8:24 PM, Oláh András : 😱 June 18, 2025 at 8:26 PM, Böröcz Tamás : Photo June 18, 2025 at 8:26 PM, Böröcz Tamás : Az AGV? June 18, 2025 at 8:27 PM, Horváth Tamás : Nevezzük annak June 18, 2025 at 10:04 PM, Horváth Tamás : Katódon megállt az AGV bent a területen. June 18, 2025 at 10:04 PM, Horváth Tamás : Poron✌️ June 18, 2025 at 10:05 PM, Oláh András : Jövünk June 18, 2025 at 10:05 PM, Horváth Tamás : Ok June 18, 2025 at 10:05 PM, Horváth Tamás : Elindult June 18, 2025 at 10:31 PM, Varga Zoltán : Helló katód raktárból nem veszi ki az anyagot az AGV #1. Megnéznétek légyszi June 18, 2025 at 10:33 PM, Oláh András : Megyünk June 18, 2025 at 10:59 PM, Varga Zoltán : AGV megállt katódon June 18, 2025 at 11:00 PM, Oláh András : 👍🏻 June 18, 2025 at 11:17 PM, Horváth Tamás : @Shakir (MCS) please check LR E1PLC031_P02 June 18, 2025 at 11:17 PM, Shakir (MCS) : Checking June 18, 2025 at 11:20 PM, Shakir (MCS) : Press LR Last LR received at 22:08 job completed at 22:30 Thanks June 18, 2025 at 11:28 PM, Horváth Tamás : Ok. Thank you June 19, 2025 at 12:21 AM June 19, 2025 at 12:21 AM, Horváth Tamás : Please check ID: E0CNV12_P07 Which port would it go to? @Shakir (MCS) June 19, 2025 at 12:23 AM, Shakir (MCS) : Means?? June 19, 2025 at 12:25 AM, Oláh András : He want to ask you check the material on P07 where should it go? We think order was cancelled by somebody June 19, 2025 at 12:26 AM, Shakir (MCS) : @FA Please check the Port E0CNVC12_P07, CCS showing carrier there but in MCS port is empty. Need confirmation Thank you June 19, 2025 at 12:28 AM, Shakir (MCS) : Yes, Job Terminated at 23:45. Should I return to STK? June 19, 2025 at 12:28 AM, Oláh András : No, they need the material in production June 19, 2025 at 12:29 AM, Shakir (MCS) : Okay thanks June 19, 2025 at 12:29 AM, Oláh András : Make order pls to E1PLC031_P01 June 19, 2025 at 12:31 AM, Shakir (MCS) : Sorry, We are not authorize to transfer to transfer any carrier to process machine. June 19, 2025 at 12:32 AM, Oláh András : I made the order thank you June 19, 2025 at 1:16 AM, Horváth Tamás : Megállt a poron katód oldalt az airshowerbe a robot. June 19, 2025 at 1:19 AM, Horváth Tamás : Szeretném kérni az FA-s kollegákat hogy segítsenek kiszedni manualba alapanyagot a por katód oldalt. Mert nagy lemaradásba leszünk a termelésbe. June 19, 2025 at 1:19 AM, Oláh András : Kis türelem jövünk June 19, 2025 at 1:19 AM, Dániel Hufnágel : Van most embered aki egyből el is tudja vinni? June 19, 2025 at 1:19 AM, Horváth Tamás : Ok. June 19, 2025 at 1:19 AM, Horváth Tamás : Igen. Meg tudjuk oldani. June 19, 2025 at 1:20 AM, Horváth Tamás : Az Anód 1-2 állása miatt van szabad emberem June 19, 2025 at 1:20 AM, Dániel Hufnágel : Okés June 19, 2025 at 1:20 AM, Horváth Tamás : 10 palettát szeretnék ki kérni. June 19, 2025 at 1:33 AM, Varga Zoltán : AGV katód air showerben megállt nézzétek meg légyszi June 19, 2025 at 1:38 AM, Varga Zoltán : We would like to request 10 palletts Umicore 311-00256B Thank you June 19, 2025 at 1:50 AM, Horváth Tamás : Mennyi idő még ide értek? Mert megfog állni a termelés.. June 19, 2025 at 1:51 AM, Oláh András : Itt vagyunk June 19, 2025 at 1:54 AM, Varga Zoltán : Can you do it for us please? @Shakir (MCS) June 19, 2025 at 1:55 AM, Shakir (MCS) : Yes, Sorry I was busy with other task June 19, 2025 at 1:55 AM, Shakir (MCS) : Now working on it June 19, 2025 at 1:56 AM, Varga Zoltán : No problem, thank you very much June 19, 2025 at 1:59 AM, Shakir (MCS) : In our list we have powder material with 111-00163A and 111-00169A product definition id. VXQ14T_umicore June 19, 2025 at 2:00 AM, Varga Zoltán : We want 169A June 19, 2025 at 2:01 AM, Shakir (MCS) : Okay working June 19, 2025 at 2:06 AM, Shakir (MCS) : Releasing on E0CNVC12_P07 June 19, 2025 at 2:11 AM, Shakir (MCS) : 10 pallets has been released Thank you June 19, 2025 at 4:18 AM, Varga Zoltán : AGV katód 1-nél megállt nézzétek meg légyszi köszönöm June 19, 2025 at 4:21 AM, Dániel Hufnágel : Elindult June 19, 2025 at 4:27 AM, Varga Zoltán : AGV #2 katód raktár előtt megállt nézzétek meg légyszi June 19, 2025 at 4:51 AM, Varga Zoltán : Alapanyag nem jön ki a raktárból utolsó futószalag előtt megállt meg tudnátok nézni légyszi? June 19, 2025 at 5:04 AM, Oláh András : @Shakir (MCS) pls check material on E0CNVC12_RTV01. Why stopped on the rtv? June 19, 2025 at 5:07 AM, Shakir (MCS) : Because destination of RTV carrier is P08, In MCS P08 already have carrier June 19, 2025 at 5:08 AM, Shakir (MCS) : Is there any carrier at P08? June 19, 2025 at 5:09 AM, Shakir (MCS) : Now it is delivered June 19, 2025 at 5:09 AM, Oláh András : Thank you 🙏 June 19, 2025 at 5:17 AM, Horváth Tamás : A Robot megállat a poron. Katód air showerbe, ajtók nyitva maradtak. June 19, 2025 at 5:48 AM, Zagyva Tamás : Katód air showerben még mindig áll a robot June 19, 2025 at 6:05 AM, Zagyva Tamás : Jó reggelt. Meg tudnátok nézni poron katód oldalon a robotot az airshowerben? June 19, 2025 at 6:12 AM, Viczai Tamás : Megyek June 19, 2025 at 6:19 AM, Viczai Tamás : Kész June 19, 2025 at 6:20 AM, Zagyva Tamás : Köszönöm June 19, 2025 at 7:46 AM, Zagyva Tamás : Katód oldalra nem viszik be a robotok az anyagot.A raktár kiadta de ennyi.Megnézitek? June 19, 2025 at 7:46 AM, Viczai Tamás : Megyek June 19, 2025 at 7:49 AM, Viczai Tamás : Az az anyag 05.09-óta ott van. Nem lehet hogy az most nem kell? June 19, 2025 at 7:54 AM, Baek Hojong(백호종)FA : Day Shift 06.19 06:00 - 18:00 백호종 Baek hojong PM Assy Choi myungwoon Assy Kim junghee June 19, 2025 at 8:07 AM, Zagyva Tamás : Hát nekünk onnan jön ki az anyag folyamatosan úgyhogy az nem lehetséges June 19, 2025 at 8:16 AM, Zagyva Tamás : Kérünk egy FA-s kollégát porra,mert teljesen megálltunk a töltéssel.Az anyagok jönnek ki a raktárból,de a robot meg se mozdulnak. Köszönöm June 19, 2025 at 8:17 AM, Viczai Tamás : Megyek June 19, 2025 at 8:23 AM, Zagyva Tamás : Oké June 19, 2025 at 9:10 AM, Zagyva Tamás : @mcs The powder warehouse is not working. June 19, 2025 at 9:16 AM, Sazzad Bhai SKon : I checked, all the ports are in-service. From where did you request for material? June 19, 2025 at 9:21 AM, Zagyva Tamás : now it's good June 19, 2025 at 12:29 PM, Zagyva Tamás : Poron anod oldalon megállt a területen az AGV.Meg kellene nézni.Köszi June 19, 2025 at 12:29 PM, Viczai Tamás : Mindjárt megyek. June 19, 2025 at 2:04 PM, Powder tréner : Hello, for production I need 10 pallets 111-00169A raw material June 19, 2025 at 2:04 PM, Mohammad Amir : Sure, working on it. June 19, 2025 at 2:04 PM, Powder tréner : Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm. June 19, 2025 at 2:04 PM, Viczai Tamás : Megyek June 19, 2025 at 2:07 PM, Mohammad Amir : I have successfully released the mentioned materials to the CNVC12. ✅ @Viczai Tamás please collect it from the O/P port of the CNVC12. Thank you very much! June 19, 2025 at 3:09 PM, Powder tréner : Hello for 10 pallets of bol only 4 pieces arrived what is the reason ? June 19, 2025 at 3:15 PM, Sazzad Bhai SKon : 5 more jobs on the way. June 19, 2025 at 3:16 PM, Powder tréner : Okay thanks June 19, 2025 at 3:17 PM, Viczai Tamás : It does not come from 2113 to 2101 June 19, 2025 at 3:18 PM, Sazzad Bhai SKon : Please remove pallet from P07 June 19, 2025 at 3:20 PM, Viczai Tamás : Empty June 19, 2025 at 3:20 PM, Sazzad Bhai SKon : On MCS it shows a pallet, this was the error. We'll update June 19, 2025 at 3:22 PM, Viczai Tamás : Thank you very much! June 19, 2025 at 3:25 PM, Viczai Tamás : it works thank you very much June 19, 2025 at 4:34 PM, Viczai Tamás : Por CA 2101 the data is stuck inside, please delete it! Thank you very much! June 19, 2025 at 4:38 PM, Sazzad Bhai SKon : Please evacuate the unit 2102. There's a pallet there June 19, 2025 at 4:40 PM, Viczai Tamás : There isn't. The port is empty. June 19, 2025 at 4:42 PM, Sazzad Bhai SKon : Rtv is not moving, transport jobs are okay. And from 2101 AGV will take the pallet. This is automated job June 19, 2025 at 4:44 PM, Viczai Tamás : OK. Thank you very much! June 19, 2025 at 6:01 PM, Varga Zoltán : Sziasztok AGV megállt katód #1 és #2 között nézzétek meg légyszi köszönöm June 19, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1): Magyar Balázs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 19, 2025 at 6:35 PM, Horváth Tamás : Sziasztok! meg kezdtük a munkát a poron Katód oldalt a raktárnál . Megállt a robot a repúlő rajt után. June 19, 2025 at 6:36 PM, Dániel Hufnágel : Egy perc és ott June 19, 2025 at 7:54 PM, Varga Zoltán : Good evening we pushed LR button on E1PLC031_P02 but material dont come out from automatic warehouse. Can you help me please @Sazzad Bhai SKon ? June 19, 2025 at 7:55 PM, Shakir (MCS) : Checking June 19, 2025 at 8:04 PM, Shakir (MCS) : Please Press LR again Thank you June 19, 2025 at 8:05 PM, Dániel Hufnágel : @Shakir (MCS) please delete order to E1PLA011_P02, this port is empty June 19, 2025 at 8:06 PM, Dániel Hufnágel : AGV#2 has job June 19, 2025 at 8:06 PM, Shakir (MCS) : Already cancelled June 19, 2025 at 8:07 PM, Shakir (MCS) : Now pallets are coming to P07 June 19, 2025 at 8:08 PM, Shakir (MCS) : Now Pallets assigned to E1PLC031_P02 June 19, 2025 at 8:11 PM, Varga Zoltán : Thank you very much for your help June 19, 2025 at 8:11 PM, Shakir (MCS) : You’re welcome June 20, 2025 at 6:12 AM June 20, 2025 at 6:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 20, 2025 at 10:32 AM, Lee Junghan(이정한)_CS : @Mohammad Amir 1F Powder CA AGV#03 Double storage. Plz check June 20, 2025 at 10:33 AM, Mohammad Amir : @FA @cehmannzsoltcehmann Please check this issue. Thank you very much! June 20, 2025 at 10:33 AM, Lee Junghan(이정한)_CS : That's what stopped the AGV! June 20, 2025 at 10:38 AM, Lee Junghan(이정한)_CS : I canceled the job and created a job with the side port. June 20, 2025 at 12:24 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon a 2 es daru pirosan villog. Hibakód nincs csak nem megy. Az RTV pedig az 1 es (01_010 CV_012 ) sornál mindig kint felejti a rásegítő láncot. Újra kell indítani és vissza húzza. Megnézitek? Köszönöm June 20, 2025 at 12:26 PM, Mr.Miti (미티) FA : Érkezem nemsokára June 20, 2025 at 12:32 PM, Mohammad Amir : @Mr.Miti (미티) FA Please also check E0STK001_C01 there is Travel Driver error. Thank you! June 20, 2025 at 12:35 PM, adambenczik : Solved June 20, 2025 at 1:09 PM, Molnár Ferenc : Sziasztok! Még mindig nem megy az automata raktár. Hibakód nincs June 20, 2025 at 2:18 PM, Nazirov Eldar : Sziasztok szeretnék kérnek segítség Anód oldalon területen megállt a AGV kollégám 😀 June 20, 2025 at 6:01 PM, Varga Tamás Powder : Sziasztok. A poron katod raktár nam adja ki az anyagot. Konvejoron van az anyag. Megtudnátok nézni? Köszönöm June 20, 2025 at 6:08 PM, Kokhan Yurii : Sziasztok. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 6:09 PM, Szücs Géza FT-B : szia, megnézzük June 20, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.20 "B" műszak, 9+1+3/12+2 Tech, 1SL Overtime(1): Kertész Dániel Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kertész Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 20, 2025 at 6:46 PM, Varga Tamás Powder : A poron az anod 2nél megállt az AGV az air shower elött.Megnéznétek? Köszönöm June 20, 2025 at 6:52 PM, Kokhan Yurii : Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 6:54 PM, Szücs Géza FT-B : van valaki a közelében? June 20, 2025 at 6:55 PM, Szücs Géza FT-B : . June 20, 2025 at 6:55 PM, Szücs Géza FT-B : ? June 20, 2025 at 7:01 PM, Varga Tamás Powder : Már szálguldozik is kifele 😊 June 20, 2025 at 9:13 PM, Kokhan Yurii : Sziasztok A Poron területén Anod oldal agv megal. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 9:14 PM, Szarka Adrián : 1 számú agv a problémás June 20, 2025 at 9:15 PM, Rácz Dániel / FA : Megyünk June 20, 2025 at 9:15 PM, Szarka Adrián : Kertünk ki anyagot és a raktár nem indult el June 20, 2025 at 9:16 PM, Szarka Adrián : Ezt megoldottuk. June 20, 2025 at 9:16 PM, Rácz Dániel / FA : Köszi akkor not going June 20, 2025 at 9:17 PM, Szarka Adrián : Agv azt nem tudjuk mi a baja June 20, 2025 at 9:17 PM, Szarka Adrián : Megállt a területen ( bent termelés Ben ) le engedett villával az IT közepén June 20, 2025 at 9:17 PM, Rácz Dániel / FA : Jövünk June 20, 2025 at 9:17 PM, Rácz Dániel / FA : Persze June 20, 2025 at 9:17 PM, Rácz Dániel / FA : Itt vagyunk June 20, 2025 at 9:40 PM, Kokhan Yurii : Katod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 9:43 PM, Varga Tamás Powder : Anod oldalt az 1es sornál megállt az AGV Légyszives nézzétek meg. Köszönöm June 20, 2025 at 9:51 PM, Szücs Géza FT-B : @Rácz Dániel / FA légyszi June 20, 2025 at 9:58 PM, Rácz Dániel / FA : Sloweed June 20, 2025 at 10:35 PM, Kokhan Yurii : Katod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 11:03 PM, Kokhan Yurii : Anod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 20, 2025 at 11:05 PM, Czeilinger Krisztián : Megyünk. June 20, 2025 at 11:17 PM, Czeilinger Krisztián : Kész. June 21, 2025 at 1:06 AM June 21, 2025 at 1:06 AM, Kokhan Yurii : Katod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 21, 2025 at 1:07 AM, Rácz Dániel / FA : Jövünk June 21, 2025 at 1:52 AM, Kokhan Yurii : Katod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 21, 2025 at 1:55 AM, Czeilinger Krisztián : Megyek. June 21, 2025 at 1:56 AM, Böröcz Tamás : Solved June 21, 2025 at 1:56 AM, Böröcz Tamás : A13 OoS June 21, 2025 at 1:57 AM, Czeilinger Krisztián : Okes June 21, 2025 at 1:57 AM, Böröcz Tamás : Anód raktárat újra kell indítani June 21, 2025 at 1:59 AM, Böröcz Tamás : Plusz még egy megfog állni mert van anyag ott ahová visznné June 21, 2025 at 3:26 AM, Kokhan Yurii : Anod raktár AGV megal. Nézzétek meg légyszíves. Köszönöm June 21, 2025 at 3:29 AM, Szücs Géza FT-B : @Böröcz Tamás megnézitek légyszives June 21, 2025 at 3:40 AM, Rácz Dániel / FA : Oos June 21, 2025 at 3:40 AM, Rácz Dániel / FA : Megyünk June 21, 2025 at 7:33 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 21, 2025 at 3:23 PM, Nazirov Eldar : Sziasztok szeretnek kérni segítség az 1 AGV kollegám tejesen lemerült köszönöm June 21, 2025 at 3:35 PM, adambenczik : Jövünk June 21, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.21 "B" műszak, 9+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Harasztia Zoltán, Gerbovits Kevin, Denkó Já June 22, 2025 at 1:07 AM June 22, 2025 at 1:07 AM, Varga Tamás Powder : Sziasztok. A poron anod oldalt az air showerben megállt az AGV. Megtudnátok nézni? Köszönöm June 22, 2025 at 1:33 AM, Varga Tamás Powder : Poron anod oldalt nem veszi le az anyagot. Meg tudnátok nézni? Köszönöm June 22, 2025 at 1:34 AM, Kokhan Yurii : ??? June 22, 2025 at 1:42 AM, Kokhan Yurii : Meg mennyi idő kell várni? June 22, 2025 at 1:43 AM, Varga Tamás Powder : Anod oldalt a 2es sornál is megállt az AGV légyszives nézzétek meg. Köszönöm June 22, 2025 at 1:44 AM, Rácz Dániel / FA : Bent vagyok elektródán most fogok elindulni kifele az öltözőbe June 22, 2025 at 1:44 AM, Szücs Géza FT-B : @Pálosi Róbert @Rácz Dániel / FA @Czeilinger Krisztián valaki menjen fel légyszives megcsinálni, kösszi June 22, 2025 at 1:44 AM, Rácz Dániel / FA : Yes Sir 🫡 June 22, 2025 at 2:11 AM, Rácz Dániel / FA : Powder 1F AN AGV #2 kivève a termelésből. A két töltő közti szabad területre mozgatva. Lekapcsolva. Tér szenzor törökgetés után sem lett jó. June 22, 2025 at 2:45 AM, Varga Tamás Powder : Poron anod oldalt nem veszi le az anyagot.. felemelte a raklapot de ferdén van a villán. Meg tudnátok nézni? Köszönöm June 22, 2025 at 2:48 AM, Kokhan Yurii : Nézzétek meg légyszíves. Köszönöm June 22, 2025 at 2:50 AM, Rácz Dániel / FA : @Pálosi Róbert @Czeilinger Krisztián Megnézitek ? Én bemegyek elektródára. June 22, 2025 at 2:52 AM, Czeilinger Krisztián : Rendben. June 22, 2025 at 2:54 AM, Pálosi Róbert : Oks June 22, 2025 at 2:54 AM, Czeilinger Krisztián : Megyünk June 22, 2025 at 3:15 AM, Czeilinger Krisztián : Kész. June 22, 2025 at 6:37 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 22, 2025 at 7:11 AM, duzzaman Md (MCS) : This message was deleted. June 22, 2025 at 9:20 AM, Nazirov Eldar : Sziasztok Anód oldalon raktár előtt Áll AGV a porron nézzétek légyszíves köszönöm June 22, 2025 at 6:02 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.22 "B" műszak, 7+2+4/12+2 Tech, 1SL Overtime(4): Harasztia Zoltán, Gégény Dávid, Kertész Dániel, Fabriczius Gergely Holiday(3): Pintye Miklós, Gerbovits Kevin, Böröczki Balázs Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Takács Ádám --------------- Assy 1F (2): Gégény Dávid, Fab June 22, 2025 at 6:30 PM, Szücs Géza FT-B : Sziasztok. Megkèrnènk a KPA-457 es frszú. Opel tulajdonosàt, álljon el az elektromos autók részère fenntartott parkolóhelyről. June 22, 2025 at 7:52 PM, Varga Tamás Powder : Sziasztok. A poron anod oldalt a raktárban az AGV hibát jelez. Közelébe nincs semmi se. Meg tudnátok nézni? Köszönöm June 22, 2025 at 7:53 PM, Rácz Dániel / FA : Szia, megpróbáljátok “muting”olni ? Persze csak akkor ha semmi nincs az útjában. June 22, 2025 at 7:58 PM, Varga Tamás Powder : Nincs semmi az utjában June 22, 2025 at 7:59 PM, Varga Tamás Powder : Szerintem az oszlop miatt jelez be June 22, 2025 at 8:01 PM, Rácz Dániel / FA : Probáld meg kérlek. 🙏 June 22, 2025 at 8:02 PM, Varga Tamás Powder : Villát felemelte és megint kiállt hibára June 22, 2025 at 8:02 PM, Varga Tamás Powder : De nem mutat hiba üzenetet June 22, 2025 at 8:03 PM, Rácz Dániel / FA : Koszos lehet a szenzor, próbáld meg tetörölni. June 22, 2025 at 8:06 PM, Czeilinger Krisztián : Megyünk. June 22, 2025 at 8:19 PM, Czeilinger Krisztián : Kész. June 22, 2025 at 9:03 PM, Kokhan Yurii : Sziasztok A Poron területén Anod oldal AGV megal. Nézzétek meg légyszíves. Köszönöm June 22, 2025 at 9:26 PM, Rácz Dániel / FA : Nem sokára érkezünk June 22, 2025 at 9:34 PM, Rácz Dániel / FA : Kész v June 22, 2025 at 9:53 PM, Kokhan Yurii : Köszönöm June 23, 2025 at 12:16 AM June 23, 2025 at 12:16 AM, Varga Tamás Powder : Poron anod oldalt a raktárban nem veszi le az AGV az anyagot. Meg tudnátok nézni? Köszönöm June 23, 2025 at 12:21 AM, Rácz Dániel / FA : @Böröcz Tamás going June 23, 2025 at 3:34 AM, Rácz Dániel / FA : Sokved June 23, 2025 at 3:41 AM, Szücs Géza FT-B : szloved June 23, 2025 at 4:23 AM, Szabó Zoltán János left this chatroom. June 23, 2025 at 4:33 AM, Varga Tamás Powder : A poron katod air showerben az AGV kiált hibára. Megnéznétek? Köszönöm June 23, 2025 at 4:33 AM, Szücs Géza FT-B : @Pálosi Róbert @Czeilinger Krisztián nézzétek meg légyszives June 23, 2025 at 4:43 AM, Kokhan Yurii : jön valaki? June 23, 2025 at 4:44 AM, Czeilinger Krisztián : Szia,nemsokára megyünk. June 23, 2025 at 4:45 AM, Czeilinger Krisztián : Megyünk June 23, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid, Magyar Balázs June 23, 2025 at 7:16 AM, Horváth Tamás : Sziasztok. Jó rggelt. Megállt az Anód oldalt a robot a poron. June 23, 2025 at 7:19 AM, Dániel Hufnágel : Egy pillanat June 23, 2025 at 9:05 AM, Varga Zoltán : Helló katód raktárból nem veszi ki az anyagot az AGV #1. Megnéznétek légyszi? Köszönöm June 23, 2025 at 9:06 AM, Oláh András : Megyünk nemsokára June 23, 2025 at 9:30 AM, Mohammad Amir : @Oláh András Please check E0STKA12_C01 there is MCP Control Power CP trip error. Thank you very much! June 23, 2025 at 9:36 AM, Varga Zoltán : Katód #2-nél megállt az AGV nézzétek meg légyszi June 23, 2025 at 9:38 AM, Oláh András : Indulunk vissza June 23, 2025 at 10:05 AM, Oláh András : @Varga Zoltán legyetek szivesek alaposan körülnézni a 2-es betöltőnél. Megint áll egy agv mert útban van neki valami June 23, 2025 at 10:06 AM, Varga Zoltán : Nincs ott semmi June 23, 2025 at 10:07 AM, Oláh András : Akkor anomália 😅 June 23, 2025 at 10:07 AM, Horváth Tamás : A rosszabikból... már már állandó😅 June 23, 2025 at 10:08 AM, Oláh András : Most már megyen 😁 June 23, 2025 at 10:08 AM, Varga Zoltán : Csak úgy suhan, köszi June 23, 2025 at 10:08 AM, Oláh András : Igyekszem 👍🏻 June 23, 2025 at 10:08 AM, Horváth Tamás : Száguld.. az első 5 métere egész igéretes. June 23, 2025 at 10:11 AM, Horváth Tamás : Sokáig jutott.. most a kanyarba állt meg katódon June 23, 2025 at 10:12 AM, Oláh András : Látom 😅 June 23, 2025 at 10:12 AM, Horváth Tamás : Jöttök? megnézítek? June 23, 2025 at 10:13 AM, Oláh András : Távgyógyítok June 23, 2025 at 10:14 AM, Horváth Tamás : Én addig rá olvasok valamit...✌️ June 23, 2025 at 10:14 AM, Oláh András : Tarottkártyából jósolok June 23, 2025 at 10:15 AM, Horváth Tamás : Itt csak a piócás ember segíthet.. June 23, 2025 at 10:18 AM, Horváth Tamás : Nem tudom közre játszik-e.. de. 3as is kiesett a játékból. June 23, 2025 at 10:19 AM, Oláh András : Az csak várakozik a bentiekre June 23, 2025 at 10:20 AM, Oláh András : A sorokközti elindult June 23, 2025 at 10:21 AM, Horváth Tamás : Igen közeledik June 23, 2025 at 10:22 AM, Horváth Tamás : Már csak a 3as várja a startot June 23, 2025 at 10:22 AM, Oláh András : Némi reményt vélek felfedezni az írásodban June 23, 2025 at 10:23 AM, Horváth Tamás : Már nem tudom ki kire vár.😅 June 23, 2025 at 10:25 AM, Oláh András : Látod egy kis türelem és már megy is minden June 23, 2025 at 10:25 AM, Horváth Tamás : Tiszta csuda... ha ezt látnátok✌️😄 June 23, 2025 at 10:25 AM, Oláh András : Látjuk acsben 😅 June 23, 2025 at 10:26 AM, Horváth Tamás : Köszöntem a közremüködést✌️ June 23, 2025 at 10:33 AM, Varga Zoltán : Ismét áll egy AGV katód 1-nél June 23, 2025 at 10:33 AM, Oláh András : Igen látom, meg kell várnom míg kiáll hibára utána tudom ujraindítani nektek June 23, 2025 at 10:45 AM, Dániel Hufnágel : 1 sor portjánál ahol AGV kiállt hibára ott maradt egy raklap? @Varga Zoltán @Horváth Tamás June 23, 2025 at 10:47 AM, Varga Zoltán : Igen és így nem is tudjuk kivenni az AGV miatt June 23, 2025 at 10:51 AM, Dániel Hufnágel : Türelmet és ott vagyok June 23, 2025 at 10:52 AM, Varga Zoltán : Itt vagyok az irodában szólj és bemegyek veled June 23, 2025 at 10:54 AM, Dániel Hufnágel : Okés June 23, 2025 at 11:32 AM, Horváth Tamás : Megállt bent a robot Katódon a poron. June 23, 2025 at 11:33 AM, Kiss Balázs F.A. : Esélytelen June 23, 2025 at 11:41 AM, Oláh András : Már robog is 👍🏻 June 23, 2025 at 12:46 PM, Varga Zoltán : Robot nem jó! Nem veszi le a palettát. Katód. Nézzétek meg légyszi June 23, 2025 at 12:46 PM, Oláh András : Megyünk mindjárt June 23, 2025 at 12:47 PM, Horváth Tamás : Anódon is megállt a raktár elótt June 23, 2025 at 12:48 PM, Oláh András : Ezek készülnek valamire June 23, 2025 at 12:54 PM, Molnár Ferenc : Helló! Por raktár földszinten anód oldalon 01_008 CV_003 Pallet over size alarm Pallete Abnormal Position Alarm. Segítséget kérek June 23, 2025 at 12:55 PM, Oláh András : Oda is megyünk June 23, 2025 at 12:55 PM, Molnár Ferenc : Köszönöm June 23, 2025 at 2:03 PM, Varga Zoltán : Helló anód oldalon megállt az AGV nézzétek meg légyszi June 23, 2025 at 2:04 PM, Oláh András : Megyünk vissza June 23, 2025 at 5:09 PM, Varga Zoltán : AGV anód raktár előtt megállt van rá kapacitásotok esetleg? June 23, 2025 at 5:18 PM, Oláh András : Megyünk mindjárt June 23, 2025 at 6:17 PM, Powder tréner : Hello Can someone tell me how much cathode material 111-00169A is in stock ? June 23, 2025 at 6:21 PM, Shakir (MCS) : Checking June 23, 2025 at 6:24 PM, Shakir (MCS) : Next Lot Available : 111-00169A (Umicor): 02 Thank you June 23, 2025 at 6:51 PM, Kokhan Yurii : Sziasztok A Poron területén Anod oldal 2db AGV megállt. Nézzétek meg légyszíves. Köszönöm June 23, 2025 at 6:51 PM, Farkas Tamàs : Megyünk June 23, 2025 at 7:37 PM, Kokhan Yurii : Katod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm June 23, 2025 at 7:37 PM, Farkas Tamàs : Megyünk June 23, 2025 at 8:06 PM, Powder tréner : Hali a katod oldalon az egyik AGV nem veszi le a raklapot a szalag-ol nézétek meg. Köszi June 23, 2025 at 8:07 PM, Farkas Tamàs : Hamarosan megyünk June 24, 2025 at 1:12 AM June 24, 2025 at 1:12 AM, Kokhan Yurii : Katod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm June 24, 2025 at 1:14 AM, Marsi Gábor : Megyünk June 24, 2025 at 2:51 AM, Kokhan Yurii : Anod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm June 24, 2025 at 2:51 AM, Farkas Tamàs : Megyünk June 24, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+1 Overtime (1): Cehman Zsolt Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Cehman Zsolt Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Martina Dávid, Magyar Balázs June 24, 2025 at 6:33 AM, Mohammad Amir : @FA @Dániel Hufnágel Good morning, Please check E0STKA11_C01 there is Fork#1 Load Position Error when Active error. Thank you very much! June 24, 2025 at 6:34 AM, Dániel Hufnágel : Just a moment please June 24, 2025 at 6:35 AM, Mohammad Amir : Sure,Thank you very much! June 24, 2025 at 6:56 AM, Varga Zoltán : Sziasztok AGV #2 megállt katódon megnézitek légyszi köszönöm June 24, 2025 at 6:57 AM, Oláh András : Kis türelem és menni fog👍🏻 June 24, 2025 at 7:05 AM, Oláh András : Már megyen is June 24, 2025 at 9:26 AM, Varga Zoltán : Helló anód Air shower előtt megállt AGV a területen Air shower nyitva mindkét oldalt.megnézitek légyszi köszönöm June 24, 2025 at 9:27 AM, Oláh András : Rálesünk June 24, 2025 at 11:35 AM, Kőszegi Bence Csaba : Sziasztok! Fólia raktár külső részére (betárolás) kérnénk segítséget. Valami oknál fogva pause státuszba került az egyik tálcánk June 24, 2025 at 11:36 AM, Kiss Balázs F.A. : Majd megyünk June 24, 2025 at 11:41 AM, Kőszegi Bence Csaba : Megoldódott, köszi June 24, 2025 at 12:53 PM, 배병민 (Bae Byoungmin) : @Yoon @윤경환 금일 포일 창고 크레인 점검으로 잠시 비가동 계획입니다. 계획 작업으로 문제되는 부분 있으시면 말씀 부탁드립니다. ※ 비가동 계획 1. 포일 1창고 : 14:00~14:30 2. 포일 2창고 : 14:30~15:00 June 24, 2025 at 12:54 PM, Yoon : 한시간 정도 비가동하는것으로 알고 있겠습니다. 점검 종료되면 공지 바랍니다. June 24, 2025 at 1:02 PM, Varga Zoltán : Helló katód raktár előtt megállt AGV #2. Nézzétek meg légyszi June 24, 2025 at 1:02 PM, Oláh András : Rendben June 24, 2025 at 1:06 PM, Oláh András : @Varga Zoltán be tudnátok lökni a billentyűzetes fiókot a pc-nél? June 24, 2025 at 1:10 PM, Kőszegi Bence Csaba : Sziasztok! Sos segítséget kérnénk a fólia raktár betárolásnál. Az 1-es raktárba bepakolásnál megállt a 2 ajtó közt a tálca és a darunak is van valami baja June 24, 2025 at 1:12 PM, Oláh András : Amikor tudunk megyünk June 24, 2025 at 1:13 PM, Varga Zoltán : Belöktem June 24, 2025 at 2:16 PM, Gábor : Szerbusztok ne Felecsétek a fóliát köszönöm June 24, 2025 at 2:17 PM, Oláh András : Üdv, dolgoznak rajta az SMC munkatársai June 24, 2025 at 2:17 PM, Gábor : Rendben June 24, 2025 at 3:48 PM, 배병민 (Bae Byoungmin) : 공유가 늦었습니다 상기 시간에 맞추어 생산 재가동되었습니다 June 24, 2025 at 6:24 PM, VK (mcs) : @FA Please check Cathode conveyor E0CNVC12 RTV is out of service. June 24, 2025 at 6:29 PM, Powder tréner : Sziasztok a Por katod oldalon a raktár nem működik nem ad ki alapanyagot pedig van kérés. Meg tudnátok nézni. Köszönöm. June 24, 2025 at 6:30 PM, Marsi Gábor : Megyünk megnézzük June 24, 2025 at 7:07 PM, Marsi Gábor : Érkezik az anyag June 25, 2025 at 12:43 AM June 25, 2025 at 12:43 AM, Kokhan Yurii : Sziasztok. A Poron területén Anod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm June 25, 2025 at 12:44 AM, Farkas Tamàs : Megyünk June 25, 2025 at 1:57 AM, Kokhan Yurii : Katód oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 25, 2025 at 1:58 AM, Marsi Gábor : Ok June 25, 2025 at 2:00 AM, Marsi Gábor : Működik is June 25, 2025 at 2:28 AM, Kokhan Yurii : Nem működik June 25, 2025 at 2:28 AM, Kokhan Yurii : Nézzétek meg légyszíves June 25, 2025 at 2:28 AM, Marsi Gábor : Ok June 25, 2025 at 2:30 AM, Marsi Gábor : Működik June 25, 2025 at 2:30 AM, Kokhan Yurii : Most igen. Köszönöm June 25, 2025 at 2:57 AM, Kokhan Yurii : Katód oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 25, 2025 at 3:00 AM, Marsi Gábor : Ok June 25, 2025 at 3:02 AM, Marsi Gábor : Megyek June 25, 2025 at 6:21 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 25, 2025 at 6:52 AM, Nazirov Eldar : Jó reggelt sziasztok a poron katód raktár előtt áll AGV megtudjátok nézni köszönöm June 25, 2025 at 8:40 AM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon nem viszi el a betárolást a daru. Hibakód nincs. June 25, 2025 at 8:40 AM, Molnár Ferenc : Segítséget kérek! June 25, 2025 at 8:55 AM, Nazirov Eldar : Sziasztok segítség kéne Katód oldalon bent áll AGV köszönöm June 25, 2025 at 8:56 AM, Nazirov Eldar : 2 db AGV June 25, 2025 at 8:57 AM, adambenczik : Sziasztok. Ma kevés emberünk van és sok a probléma de amint tudunk, érkezünk June 25, 2025 at 8:59 AM, 이게리 : @adambenczik kérlek kezeljétek prioba ha megoldható. Nem tudunk keverni mert lassan töltünk a gyenge anyagellátás miatt Köszönöm June 25, 2025 at 9:01 AM, Mr.Miti (미티) FA : 2 ember van egész elektroda részre , nem tudunk folyamatosan a poron lenni. Igyekszünk, amit tudunk megyünk June 25, 2025 at 9:46 AM, 장영환(Younghwan Chang) : @KIM SEYEON [김세연]_FA PM님 양극쪽 작업자가 부족해서 AGV를 최대한 활용하고 싶은데 4대 중에 1대가 비가동 상태인 것 같네요 혹시 특별한 사유가 있어서 멈춰있는걸까요? June 25, 2025 at 9:47 AM, KIM SEYEON [김세연]_FA : 사유가 있습니다. 하지만 투입하도록 확인해보겠습니다. June 25, 2025 at 9:50 AM, 장영환(Younghwan Chang) : 603F 조립 쇼티지 직전이라 바로 생산을 해야하는데 유미코어 자재 이송이 잘 안되고 있습니다 AGV 대응이 안되는 상황이라면 수동으로 자재를 꺼내더라도 투입 필요해서 문의드렸습니다 June 25, 2025 at 9:54 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please arrange technicians to load CA powder material manually on the floor. June 25, 2025 at 9:55 AM, KIM SEYEON [김세연]_FA : RTD OP will send it to CA Powder conveyor now. June 25, 2025 at 9:58 AM, Mr.Miti (미티) FA : there are external colleagues to fill the ground floor rooms June 25, 2025 at 10:00 AM, Mr.Miti (미티) FA : 1floor or ground floor you mean? June 25, 2025 at 10:02 AM, 장영환(Younghwan Chang) : @mcs Please take out 10 umicore pallet to 1f cathode floor 111-00169A June 25, 2025 at 10:03 AM, Mohammad Amir : Sure , working on it. June 25, 2025 at 10:14 AM, Mohammad Amir : Sir, Materials have been released successfully at the OP port of CNVC12 ✅. Please collect it. Thank you very much! June 25, 2025 at 10:18 AM, KIM SEYEON [김세연]_FA : 1f June 25, 2025 at 10:18 AM, KIM SEYEON [김세연]_FA : by using agv, please load UMICORE material CA to the floor. June 25, 2025 at 10:18 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA June 25, 2025 at 10:40 AM, Mohammad Amir : Sir, Update :- All materials have been successfully transferred ✅. Thank you very much! June 25, 2025 at 10:47 AM, 윤경환 : @FA Hello. Please check it. Anode side E0STKA11 Error MSG : 146.Ready off during forking. June 25, 2025 at 11:16 AM, Molnár Ferenc : Sziasztok! Úgy állt meg a daru hogy kint van a villája. Segítséget kérek June 25, 2025 at 11:16 AM, Mr.Miti (미티) FA : Érkezem June 25, 2025 at 11:48 AM, 배병민 (Bae Byoungmin) : @Yoon @윤경환 금일 포일 창고 추가로 크레인 점검이 필요하여 잠시 비가동 계획입니다. 계획 작업으로 문제되는 부분 있으시면 말씀 부탁드립니다. ※ 비가동 계획 1. 포일 1창고 : 14:00~14:30 June 25, 2025 at 11:54 AM, 배광근 (Ben) : 안녕하십니까! 자재관리 배광근 입니다. 두시까지 포일 자동화창고에 넣을 예정인데, 2시 이후면 괜찮습니다 June 25, 2025 at 11:56 AM, 배병민 (Bae Byoungmin) : 네 확인 감사합니다 June 25, 2025 at 2:16 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon nem működik a betárolás! Segítséget kérek! June 25, 2025 at 2:30 PM, 배병민 (Bae Byoungmin) : 포일 1창고 크레인 점검 완료되어 정상 생산 진행하였습니다. Down time : 14:00~14:30 June 25, 2025 at 2:33 PM, Hoyoung Lee : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA 금일 오전 11시16분 부터 음극 분체 GF자동화 창고에 자재 투입이 멈춰있다고ㅠ합니다. 혹시 조치 부탁드려도 될까요 ? June 25, 2025 at 2:36 PM, 배병민 (Bae Byoungmin) : 현재 음극 분체창고#1,2,3 상태는 정상적으로 보입니다. 혹시 재차 안되는 부분있으시면 공유 부탁합니다 June 25, 2025 at 2:44 PM, Hoyoung Lee : 네 지금 제가 이동해보갰습니다 June 25, 2025 at 2:46 PM, 배병민 (Bae Byoungmin) : RTV 문제 같습니다. 현재 조치 진행중입니다 June 25, 2025 at 3:07 PM, Hoyoung Lee : RTV가 아니라 음극 분체 1반 크레인에 스테커가 뜨기 전에 팔레트개 2개 들어가있네요 위치 오류라고 오신분들이 이야기하시는데요 June 25, 2025 at 3:07 PM, Hoyoung Lee : 4시간 넘게 서있어서.. 저희 업무가 좀 많이 .. June 25, 2025 at 3:26 PM, 배병민 (Bae Byoungmin) : 네 잡이 생성되어있는데 화물을 픽업안하고 있는거 확인 되었습니다. 빠른 확인 해보겠습니다 June 25, 2025 at 3:56 PM, 윤경환 : 내일도 양,음극 합쳐서 200 팔렛 이상 투입 해야 합니다. 도움 요청 드립니다. June 25, 2025 at 5:33 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check ESTK001_C01 there is SCP Main Power CP trip error. Thank you very much! June 25, 2025 at 5:34 PM, Mr.Miti (미티) FA : Checking June 25, 2025 at 5:56 PM, 배병민 (Bae Byoungmin) : 조치는 완료되었습니다. 해당 오류 원인은 확인 되었으며 크레인 알람 발생 및 처리 후, CCS PIO 처리 과정에서 초기화가 안되고 유지되는 문제로 동작이 멈춰있었던 상황입니다. 재발방지 개선 검토하여 진행예정입니다. 출하에 차질을드려 죄송합니다. June 25, 2025 at 6:06 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.25. "B" műszak, 11+2+2/12+2 Tech, 1SL Overtime(2): Gégény Dávid, Kertész Dániel Holiday(1): Böröczki Balázs Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Kovács Ágnes --------------- Assy 1F (3): Gégény Dávid, Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovits Kevin, Denkó János, June 25, 2025 at 6:39 PM, Kokhan Yurii : Sziasztok. A Poron területén katod oldalon AGV megállt. Nézzétek meg légyszíves. Köszönöm June 25, 2025 at 6:41 PM, Csanálosi Gábor FA : Indulnak srácok June 25, 2025 at 6:46 PM, Rácz Dániel / FA : Jövök June 25, 2025 at 6:57 PM, Rácz Dániel / FA : Kész, “position initialized” hiba miatt állt meg. June 25, 2025 at 6:59 PM, Rácz Dániel / FA : AGV #1, a #2,#3-as AGV addig bent várakozott a termelésben “idle” módban. Nem jelezte hogy blokkolva van. June 25, 2025 at 7:14 PM, Varga Tamás Powder : Poron katod 1nél az 1es AGV megállt. Megnéznétek? Köszönöm June 25, 2025 at 7:15 PM, Rácz Dániel / FA : Megyek June 25, 2025 at 7:25 PM, Rácz Dániel / FA : Megy June 25, 2025 at 7:26 PM, Rácz Dániel / FA : Ha megint megáll kiveszem a termelésből June 25, 2025 at 7:31 PM, Böröcz Tamás : @Rácz Dániel / FA C13 June 25, 2025 at 7:31 PM, Rácz Dániel / FA : Megyek June 25, 2025 at 7:31 PM, Böröcz Tamás : Solved June 25, 2025 at 7:32 PM, Böröcz Tamás : Bocs be vagyok parázva June 25, 2025 at 7:32 PM, Rácz Dániel / FA : Akkor nem megyek June 25, 2025 at 7:32 PM, Rácz Dániel / FA : Köszi June 25, 2025 at 7:32 PM, Böröcz Tamás : Homeofficeból megoldottam June 25, 2025 at 7:38 PM, Varga Tamás Powder : This message was deleted. June 25, 2025 at 8:34 PM, Varga Tamás Powder : A poron katod oldalt a 2es sorra a 01es portra nem jön az anyag. És az 1es sornál megáll az AGV, a 3as sor mögött is kiállt hibára az AGV Meg tudnátok nézni? Köszönöm June 25, 2025 at 8:37 PM, Czeilinger Krisztián : Megyünk June 25, 2025 at 9:23 PM, Varga Tamás Powder : Poron katod oldalt a 3as sor mögött megállt az AGV megnéznétek? Köszönöm June 25, 2025 at 9:33 PM, Rácz Dániel / FA : Jövünk, de valami az útjában van azért állt ki hibára June 25, 2025 at 10:37 PM, Varga Tamás Powder : A poron katod oldalt a raktárban az AGV-k egymásnak utban vannak. Megtudnátok nézni? Köszönöm June 25, 2025 at 10:40 PM, Varga Tamás Powder : Egymásra várakoznak June 25, 2025 at 10:44 PM, Szarka Adrián : Tudnál ebben segíteni légyszíves mi van az útjában ? És akkor @Varga Tamás Powder azt tegyétek el légyszíves. Mert az a baj hogy most hívott a Műszakvezető hogy így nem tudnak haladni és mindjárt ki fogynak a porból és meg fog állni a Mixing. June 25, 2025 at 10:44 PM, Szarka Adrián : Dani legyszives nézd meg mi a baj. Köszönöm June 25, 2025 at 10:47 PM, Varga Tamás Powder : Nem volt neki semmi utjába. Rosszúl fordult és a J/C közel volt neki. June 25, 2025 at 10:48 PM, Rácz Dániel / FA : Köszi June 25, 2025 at 10:51 PM, Kokhan Yurii : Valaki tud jönni? June 25, 2025 at 10:51 PM, Rácz Dániel / FA : Távolról csináljuk kis türelem June 25, 2025 at 11:00 PM, Szarka Adrián : Minden rendben ? June 25, 2025 at 11:01 PM, Kokhan Yurii : Most jelenleg igen June 25, 2025 at 11:05 PM, Böröcz Tamás : Én is szeretem a Bountyt June 25, 2025 at 11:09 PM, Szarka Adrián : @Szücs Géza FT-B akadozva jön ki a por és már a Mixingen a Dávid os jelezte hogy lassú a betoltes. Kicsit nem tud fel menni valaki aki ott maradni legalább 1-2 órát míg utol éri magát az agv ? June 25, 2025 at 11:10 PM, Szücs Géza FT-B : létszám miatt nem kivitelezhető June 25, 2025 at 11:11 PM, Schmidt Dávid : akkor meg fog állni a gyàrtàs June 25, 2025 at 11:14 PM, Szücs Géza FT-B : hibára tud felmenni valaki, de állandóra nincs kapacitás June 25, 2025 at 11:15 PM, Schmidt Dávid : Nem tudunk órákat várni az AGV-re mert a Coating utol fog érni minket June 25, 2025 at 11:15 PM, Szarka Adrián : Mindjárt fel küld a Géza és koreai támogató vagy valakit aki Figyeli az agv hogy meg ne álljon megint June 25, 2025 at 11:16 PM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA can u check please what is the problem on CA side? Manufacturing say the material flow is slow June 25, 2025 at 11:24 PM, 방혁 PM(Bang.Hyuk) FA : Powder? June 25, 2025 at 11:25 PM, Kokhan Yurii : Yes June 25, 2025 at 11:27 PM, 방혁 PM(Bang.Hyuk) FA : Powder 2 line is working now? June 25, 2025 at 11:28 PM, Szücs Géza FT-B : yes June 25, 2025 at 11:28 PM, Kokhan Yurii : two lines are working June 25, 2025 at 11:29 PM, 방혁 PM(Bang.Hyuk) FA : We need more agvs Geza can you check AGV4,5??? June 25, 2025 at 11:29 PM, Szücs Géza FT-B : not have 5 AGV, just 4 June 25, 2025 at 11:29 PM, Szücs Géza FT-B : and June 25, 2025 at 11:30 PM, Szücs Géza FT-B : I have no information about whether AGV 4 is in good condition. June 25, 2025 at 11:50 PM, 방혁 PM(Bang.Hyuk) FA : Omw June 26, 2025 at 12:55 AM June 26, 2025 at 12:55 AM, Varga Tamás Powder : A poron katod oldalt a 2es sornál az AGV kiállt hibára. Meg tudnátok nézni? Köszönöm June 26, 2025 at 12:55 AM, Rácz Dániel / FA : Going June 26, 2025 at 12:55 AM, Szücs Géza FT-B : @Rácz Dániel / FA @Böröcz Tamás köszönöm June 26, 2025 at 12:59 AM, Rácz Dániel / FA : Itt June 26, 2025 at 1:13 AM, Varga Tamás Powder : A poron az 1es AGV sűrün megáll menet közbe és ujra elindul. Megtudnátok nézni? Köszönöm. June 26, 2025 at 1:14 AM, Rácz Dániel / FA : Megyek vissza June 26, 2025 at 1:14 AM, Varga Tamás Powder : A raktárban is kiállt hibára az AGV June 26, 2025 at 1:14 AM, Rácz Dániel / FA : Rendben June 26, 2025 at 1:27 AM, Rácz Dániel / FA : CA AGV #1-nek megtarkatítottam a jobb oldali szenzort. June 26, 2025 at 1:48 AM, Kokhan Yurii : Nem sikerült. Nézzétek meg légyszíves June 26, 2025 at 1:53 AM, Rácz Dániel / FA : Nem sokára érkezünk June 26, 2025 at 2:45 AM, Varga Tamás Powder : A poron katod 1es sornál megállt az 1es AGV. Megnéznétek? Köszönöm June 26, 2025 at 2:47 AM, Rácz Dániel / FA : @Szücs Géza FT-B nézitek ? June 26, 2025 at 3:03 AM, Szücs Géza FT-B : Fánk intézte June 26, 2025 at 3:09 AM, Rácz Dániel / FA : Köszönöm June 26, 2025 at 4:01 AM, Varga Tamás Powder : A poron a katod raktárban az AGV-k kiáltak hibára. Megnéznétek? Köszönöm June 26, 2025 at 4:02 AM, Szücs Géza FT-B : na szép June 26, 2025 at 4:11 AM, Szücs Géza FT-B : távolról kész June 26, 2025 at 6:49 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 26, 2025 at 7:06 AM, 임종현(JongHyun Lim) : AGV좀 봐주세요 양극 파우더 투입이 원활하지 않습니다 June 26, 2025 at 7:12 AM, Nazirov Eldar : This message was deleted. June 26, 2025 at 7:16 AM, Nazirov Eldar : @Mohammad Amir Please take out 25 umicore pallet to 1f cathode floor 111-00169A June 26, 2025 at 7:19 AM, 지석범PM (이반차FA) : 분체 양극 1,2라인 사이에서 알람 발생이 잦은 구간이 있어서 해당 루트로 이동하지 않도록 설정하겠습니다. 해당 구간 비사용으로 인해 앞으로 AGV는 3라인으로 우회합니다. June 26, 2025 at 7:20 AM, Nazirov Eldar : @Mr.Miti (미티) FA szeretnék kérnek segítsék manuálisan kéne kiszedni 25 Paletta köszönöm June 26, 2025 at 7:20 AM, Mr.Miti (미티) FA : Rendben June 26, 2025 at 7:20 AM, Mr.Miti (미티) FA : Érkezni fog Ádám és Zsolti June 26, 2025 at 7:20 AM, Nazirov Eldar : Köszönöm June 26, 2025 at 7:20 AM, Mr.Miti (미티) FA : Szivesen June 26, 2025 at 7:21 AM, Mr.Miti (미티) FA : Ugye azt tudod hogy akkor megint csak az umicoreos palettak lesznek ott ? June 26, 2025 at 7:21 AM, Nazirov Eldar : Igen most addig 1-2 re kérünk a por June 26, 2025 at 7:22 AM, Nazirov Eldar : Hogy addig megcsináljuk a Manuálisan kiszedés June 26, 2025 at 7:24 AM, Shakir (MCS) : We’re releasing the pallets on E0CNVC12_P07. Thank you June 26, 2025 at 7:25 AM, 임종현(JongHyun Lim) : 확인 감사드립니다 June 26, 2025 at 7:31 AM, Nazirov Eldar : Szeretne kérlek segíts porra AGV k Összekeverte minden June 26, 2025 at 8:46 AM, Nazirov Eldar : Mikor tudjátok jönni manuálisan kéne kiszedni most mert Állni fog a termelés köszönöm June 26, 2025 at 8:46 AM, cehmannzsoltcehmann : Itt vagyunk mar June 26, 2025 at 8:46 AM, Nazirov Eldar : Egyik Tréner ott van Tudja segíteni nektek June 26, 2025 at 8:46 AM, Nazirov Eldar : Köszönöm June 26, 2025 at 9:16 AM, Mr.Miti (미티) FA : @지석범PM (이반차FA) . June 26, 2025 at 9:19 AM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalt van probléma az automata raktárban. RTV és a szalag közt meg akadt az anyag. Segítséget kérek. June 26, 2025 at 9:37 AM, 윤경환 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 안녕하세요 피엠님 금일 양음극 분체 200 팔렛 이상 투입 해야 합니다. 지금 음극 분체 창고 RTV에서 CV로 넘어가다 걸려서 Run tome over alram 및 Data missmatch Error 발생 했는데 빠른 조치 부탁 드립니다. June 26, 2025 at 9:51 AM, 배병민 (Bae Byoungmin) : 네 입고에 문제없게 최대한 대응 해드리겠습니다 June 26, 2025 at 9:52 AM, 윤경환 : 감사 합니다. June 26, 2025 at 9:54 AM, Shakir (MCS) : 25 pallets has been released ✅ Thank you June 26, 2025 at 10:09 AM, cehmannzsoltcehmann : Elindult, tudtok tovább betölteni June 26, 2025 at 10:12 AM, Molnár Ferenc : Köszönöm szépen June 26, 2025 at 12:25 PM, Nazirov Eldar : @Shakir (MCS) Hi, could you please tell me how many pallets are left so that we can record them manually June 26, 2025 at 12:26 PM, Nazirov Eldar : Umicore? June 26, 2025 at 12:26 PM, Shakir (MCS) : Checking June 26, 2025 at 12:28 PM, Nazirov Eldar : If there are only a few left, could you please cancel them so that the warehouse gives them to us only when we request them? Because we also need other materials, and they’re not being released. Please make it so that the warehouse gives us the materials only when we request them thank you June 26, 2025 at 12:29 PM, Shakir (MCS) : Total 6 pallets left, 4 inside STK, 1 pallet at STKC12_P06 and 1 pallet at STKC11_P04 Thank you June 26, 2025 at 12:29 PM, Shakir (MCS) : I will cancel the pallet which is inside the STK June 26, 2025 at 12:30 PM, Shakir (MCS) : DONE ✅ June 26, 2025 at 12:30 PM, Nazirov Eldar : Thank you June 26, 2025 at 1:15 PM, KIM SEYEON [김세연]_FA : @장영환(Younghwan Chang) 님 지금 분체양극은 에어샤워 문제로 AGV 자동 가동이 안됩니다. 혹시 수동배출이 필요하시면 말씀해주세요 June 26, 2025 at 2:11 PM, Nazirov Eldar : @Mohammad Amir Please take out 25 CDS pallet to 1f cathode floor 111-0150A thank you June 26, 2025 at 2:13 PM, Shakir (MCS) : Working on it June 26, 2025 at 2:21 PM, Shakir (MCS) : @FA Please remove pallets from E0CNVC12_P07 two more pallets waiting, after that I will release different pallets (CDS) Thank you June 26, 2025 at 2:37 PM, 윤경환 : @배병민 (Bae Byoungmin) 피엠님 혹시 CCS 아이디 비밀번호도 없어졌나요? June 26, 2025 at 3:58 PM, adambenczik : Done June 26, 2025 at 3:59 PM, 배병민 (Bae Byoungmin) : 혹시 쓰고계시는 아뒤가 어떻게 되실까요? June 26, 2025 at 3:59 PM, Shakir (MCS) : Now we are releasing June 26, 2025 at 4:18 PM, 윤경환 : Operator 썻었고, 지금은 materialmng 사용 하고 있습니다. June 26, 2025 at 4:23 PM, 배병민 (Bae Byoungmin) : materialmng 아뒤는 계정에서 확인이 안되고 있습니다. June 26, 2025 at 4:36 PM, Shakir (MCS) : 25 CDS pallets has been released ✅ Thank you June 26, 2025 at 6:13 PM, Rácz Dániel / FA : Sziasztok nem sokára érkezünk June 26, 2025 at 6:15 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.26. "B" műszak, 10+2+1/12+2 Tech, 1SL Overtime(1): Fabriczius Gergely Holiday(2): Böröczki Balázs, Csanálosi Gábor Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Por: Rácz Dániel, Nagy Sándor(op) Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Kovács Ágnes, Fabriczius Gergely NC Op: Gombos Norbert --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovi June 26, 2025 at 6:18 PM, Kokhan Yurii : Sziasztok. A Poron területén ma valaki jön? @Szücs Géza FT-B June 26, 2025 at 6:18 PM, Szücs Géza FT-B : szia, oda van írva... June 26, 2025 at 6:19 PM, Szarka Adrián : Szia válaszolok szebben igen fog menni. Az uj Kollega meg a Dani (thumbsup)(thumbsup)(thumbsup)(thumbsup) biztos meleg van és azért nem ment …. June 26, 2025 at 6:21 PM, Kokhan Yurii : @Rácz Dániel / FA szia. hol vagy? June 26, 2025 at 6:40 PM, Rácz Dániel / FA : Itt vagyunk már elnézést a késésért. June 26, 2025 at 6:47 PM, Rácz Dániel / FA : @Kokhan Yurii kellene egy béka June 26, 2025 at 9:17 PM, 방혁 PM(Bang.Hyuk) FA : @Manufacturing Electrode powder 1F CA air shower repair complete Please create LR and UR after using manual materials June 26, 2025 at 9:25 PM, Rácz Dániel / FA : Thank you Sir 🫡 June 26, 2025 at 10:45 PM, Böröcz Tamás : @FA E0STKC13 DOOR OPEN ERROR since 22:38 Thank you June 26, 2025 at 10:49 PM, Rácz Dániel / FA : Köszönjük az észre vételt, mi voltunk azok. Az új kolléga oktatása céljából mentünk be. A termelést nem akadályoztuk. June 26, 2025 at 10:50 PM, Rácz Dániel / FA : Sokved June 27, 2025 at 2:42 AM June 27, 2025 at 2:42 AM, Rácz Dániel / FA : @Kokhan Yurii elmegyünk prízmáért. June 27, 2025 at 2:44 AM, Kokhan Yurii : Mennyi ideig tart ez megcsinálni? June 27, 2025 at 2:44 AM, Rácz Dániel / FA : @Szücs Géza FT-B átmegyek a modul 2F re prízmáért. June 27, 2025 at 2:45 AM, Rácz Dániel / FA : Amint lesz prízma kb 5 perc max June 27, 2025 at 2:52 AM, Rácz Dániel / FA : @modulon nem jó a lift több idő lesz elnézést June 27, 2025 at 3:02 AM, duzzaman Md (MCS) : @Fa Please check E0STKC12, Hoist time over error. Thank you June 27, 2025 at 3:03 AM, Szücs Géza FT-B : solved June 27, 2025 at 3:07 AM, Rácz Dániel / FA : Thayk you June 27, 2025 at 3:47 AM, Rácz Dániel / FA : Készen van. June 27, 2025 at 3:47 AM, Kokhan Yurii : Köszönöm June 27, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 27, 2025 at 8:10 AM, Horváth Tamás : Sziasztok. Olyan kérdésem van. Anód oldalt a poron mind a 3 AGV müködő képes? June 27, 2025 at 8:15 AM, Szabadi Miki : Csak kettőt látok bekapcsolva a harmadikrol nincs információ miért van lekapcsolva June 27, 2025 at 8:22 AM, Horváth Tamás : Akkor hétvégén felpörögnek, mert 4 sort kell ellátniuk🤣✌️ June 27, 2025 at 8:24 AM, Szabadi Miki : Hibátlanul fognak menni ahogy mindig 😅 June 27, 2025 at 9:04 AM, Varga Zoltán : AGV megállt anód raktár előtt nézzétek meg légyszi köszönöm June 27, 2025 at 12:40 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon úgy állt meg a darú hogy ki van tolva a villája! Segítséget kérek June 27, 2025 at 12:40 PM, Oláh András : Amint tudunk megyünk, csak sajnos a coatingon is itt kell lennünk June 27, 2025 at 12:41 PM, Molnár Ferenc : Rendben várunk. Köszönöm June 27, 2025 at 12:47 PM, Varga Zoltán : Helló anód oldalon a lift előtt megállt AGV #1 pos cont pos err hibával nézzétek meg légyszi June 27, 2025 at 12:50 PM, Szabadi Miki : Amint lesz szabad kapacitás megyünk June 27, 2025 at 1:41 PM, Varga Zoltán : AGV megállt anód #2- nél nézzétek meg légyszi June 27, 2025 at 1:43 PM, Szabadi Miki : Megyek June 27, 2025 at 1:43 PM, Varga Zoltán : Katód oldalon nem veszi ki az anyagot nézzétek meg azt is légyszi June 27, 2025 at 1:44 PM, Szabadi Miki : Oda is megyek June 27, 2025 at 2:18 PM, Varga Zoltán : Katód 1-nél agv megállt a kanyarban nézzétek meg légyszi June 27, 2025 at 2:25 PM, Szabadi Miki : Most időbe fog telni mire odaérünk June 27, 2025 at 2:51 PM, Kőszegi Bence Csaba : Sziasztok! Fólia taktár 2-es stk nem hibában áll. Nézzetek rá légyszi. Köszi June 27, 2025 at 2:52 PM, Oláh András : Jövünk June 27, 2025 at 2:53 PM, Kőszegi Bence Csaba : Most látom jól leírtam😂 szóval hibában áll😉 bocsi June 27, 2025 at 2:53 PM, Szabadi Miki : Nézem June 27, 2025 at 2:56 PM, Szabadi Miki : Már robog is June 27, 2025 at 2:56 PM, Kőszegi Bence Csaba : Köszönjük a segítséget😇 June 27, 2025 at 2:57 PM, Szabadi Miki : Igazán nincs mit 🙂 June 27, 2025 at 3:08 PM, Kőszegi Bence Csaba : Ismét én😅 Travel Driver errort ír, nem engedi kinyomni June 27, 2025 at 3:12 PM, Szabadi Miki : Mindjárt intézzük June 27, 2025 at 3:12 PM, Kőszegi Bence Csaba : Köszi June 27, 2025 at 3:13 PM, Kőszegi Bence Csaba : Köszi 😇 June 27, 2025 at 3:17 PM, Varga Zoltán : Anód raktár előtt megállt AGV #1 nézzétek meg légyszi June 27, 2025 at 3:18 PM, Szabadi Miki : Már zakatol is tovább June 27, 2025 at 3:20 PM, Varga Zoltán : Gyakran megáll és elindul, piszkos a szenzor? June 27, 2025 at 3:20 PM, Szabadi Miki : Igen valoszinű June 27, 2025 at 3:30 PM, Szabadi Miki : Megyünk megnézzük June 27, 2025 at 3:32 PM, Horváth Tamás : Anód raktár elött itt vesztegel az AGV a poron June 27, 2025 at 3:34 PM, Szabadi Miki : Uton June 27, 2025 at 3:43 PM, JAEYOON KIM / CS invited jung soonhak정순학 and 윤한수. June 27, 2025 at 3:58 PM, jung soonhak정순학 invited JU YOUNG(정주영) / AGV, Park Minho(박민호)_CS, Doohan Jang [장두한]_기구, shinyunhyun/제어/시너스텍, SungKwun/(조성관)/AGV, RYUKYUNGMIN(류경민)_AGV, HONG SUK DO[홍석도] 제어 and 김용성. June 27, 2025 at 4:22 PM, Horváth Tamás : Katódon megállt az AGV a poron June 27, 2025 at 7:24 PM, Baek Hojong(백호종)FA : Night shift FA Schedule Date: 2025.06.27 Time:18:00~06:00 FA 백호종 (Baek Hojong) GF Assy Ca 최명운 (CHOI Myoungwoon) GF Assy An 김정희 (Kim jeong hul) June 27, 2025 at 8:35 PM, Rózsavölgyi Attila : Sziasztok kakodon bent megált az AGV meg nézitek? Köszönöm. June 27, 2025 at 8:35 PM, Marsi Gábor : Nézem June 27, 2025 at 8:36 PM, Marsi Gábor : Már megy is June 27, 2025 at 8:36 PM, Rózsavölgyi Attila : Köszi June 27, 2025 at 9:15 PM, Simon Attila F. A. : Ati! Valami van az AGV előtt. Nézz rá, légyszi. June 27, 2025 at 9:15 PM, Simon Attila F. A. : 01-es. June 27, 2025 at 9:15 PM, Simon Attila F. A. : Katód June 27, 2025 at 9:15 PM, Rózsavölgyi Attila : Nem nics semi a villát nem akarja felemelni June 27, 2025 at 9:16 PM, Simon Attila F. A. : Ó. Ol, megyünk. June 27, 2025 at 9:17 PM, Rózsavölgyi Attila : Anod on is ál az AVG June 27, 2025 at 9:18 PM, Simon Attila F. A. : Megy a Gaben... June 27, 2025 at 9:39 PM, Marsi Gábor : Kész June 27, 2025 at 9:39 PM, Marsi Gábor : Kész June 27, 2025 at 9:48 PM, Zagyva Tamás : Kösz June 27, 2025 at 10:50 PM, Zagyva Tamás : Anód oldalon az airshower előtt megállt az AGV.Nézzétek meg lécci June 27, 2025 at 11:06 PM, Simon Attila F. A. : Megyünk. June 27, 2025 at 11:20 PM, Marsi Gábor : Kész June 27, 2025 at 11:21 PM, Zagyva Tamás : Köszönöm June 28, 2025 at 3:29 AM June 28, 2025 at 3:29 AM, VK (mcs) : @FA Please check Anode powder STK A13 Load collapse error. June 28, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor June 28, 2025 at 6:48 AM, Horváth Tamás : Jó reggelt. Sziasztok. Poron anód oldalt megállt a robot.✌️ June 28, 2025 at 6:49 AM, Dániel Hufnágel : Jó reggelt! Mingyárt érkezem June 28, 2025 at 8:34 AM, Varga Zoltán : Helló katód #1-nél megállt AGV nézzétek meg légyszi köszönöm June 28, 2025 at 8:39 AM, Mohammad Amir : @Dániel Hufnágel Please check E0STK001_C01 there is materials losening right error. Thank you very much! June 28, 2025 at 8:40 AM, Szabadi Miki : Már megy tovább June 28, 2025 at 8:42 AM, Horváth Tamás : Katód oldalt meg állt a robot bent a Katód 1es töltönél June 28, 2025 at 8:44 AM, Oláh András : Megyünk June 28, 2025 at 10:38 AM, Mohammad Amir : @Szabadi Miki Please check E0STK002_C01 there is Travel driver error. Thank you very much! June 28, 2025 at 10:43 AM, Szabadi Miki : Checking June 28, 2025 at 1:33 PM, Horváth Tamás : Anodon megállt a robot a poron June 28, 2025 at 1:34 PM, Dániel Hufnágel : Nem látunk hibát, nincs feladata egyik gépünknek sem June 28, 2025 at 4:59 PM, Horváth Tamás : Katód air shower elött a robot megállt a poron. June 28, 2025 at 5:04 PM, Oláh András : Mindjárt megyünk June 28, 2025 at 7:58 PM, Zagyva Tamás : Sziasztok Poron anód raktárnál megálltak a robotok.Megnézitek? June 28, 2025 at 7:59 PM, Farkas Tamàs : Megyünk June 28, 2025 at 8:23 PM, Marsi Gábor : Kész June 29, 2025 at 12:24 AM June 29, 2025 at 12:24 AM, VK (mcs) : @FA Please check Anode powder STK A12 MCP control power CP trip error. June 29, 2025 at 12:34 AM, Farkas Tamàs : Done June 29, 2025 at 1:14 AM, Zagyva Tamás : Poron Anód raktárnál megállt az egyik robot.Megnézitek? June 29, 2025 at 1:23 AM, Farkas Tamàs : Megyünk June 29, 2025 at 1:32 AM, Marsi Gábor : Kész June 29, 2025 at 1:33 AM, Zagyva Tamás : Köszönöm👍 June 29, 2025 at 6:03 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Zsurbej Zsolt Modul(2): Nagy Gábor, Martina Dávid Hun Operators (2): Gombos Csaba Nagypál Gábor June 29, 2025 at 7:31 AM, Varga Zoltán : Sziasztok poron katód oldalon AGV #3megállt nézzétek meg légyszi. Próbáltam szenzort törölni de nem lett jó June 29, 2025 at 7:38 AM, Oláh András : Megyünk mindjárt June 29, 2025 at 9:33 AM, Varga Zoltán : Sziasztok anód raktár előtt megállt AGV #1 és katód #1-nél is áll nézzétek meg légyszi June 29, 2025 at 9:34 AM, Kiss Balázs F.A. : Nézzük June 29, 2025 at 9:52 AM, Varga Zoltán : Katódon már jó June 29, 2025 at 10:27 AM, Horváth Tamás : Anód raktárba dekkol a poron a robot.. anyaggal a hátán. June 29, 2025 at 10:46 AM, Szabadi Miki : Itt vagyunk June 29, 2025 at 11:17 AM, Varga Zoltán : Sziasztok katód #1-nél megállt AGV nézzétek meg légyszi June 29, 2025 at 11:18 AM, Oláh András : Kis türelem megnézzük June 29, 2025 at 11:43 AM, Szabadi Miki : Már robog is June 29, 2025 at 12:28 PM, Varga Zoltán : Megált a robot katod légzsilipbe. Nézzétek meg légyszi köszönöm June 29, 2025 at 12:29 PM, Kiss Balázs F.A. : Oksa June 29, 2025 at 1:25 PM, Kiss Balázs F.A. : @Horváth Tamás elvileg mindenki magára talált es mennek June 29, 2025 at 3:58 PM, Horváth Tamás : Hello. Katód poron megállt a robot a területen June 29, 2025 at 4:01 PM, Oláh András : Szia mindjárt menni fog June 29, 2025 at 4:28 PM, Varga Zoltán : Katód #1-nél megállt az AGV nézzétek meg légyszi June 29, 2025 at 4:29 PM, Varga Zoltán : Anód #1-nél is légyszi June 29, 2025 at 4:45 PM, Varga Zoltán : Katód #1-nél áll az AGV, nézzétek meg légyszi köszönöm June 29, 2025 at 4:45 PM, Oláh András : Elvileg már megy June 29, 2025 at 4:45 PM, Oláh András : Anod is June 29, 2025 at 4:47 PM, Varga Zoltán : Azóta megint megállt June 29, 2025 at 4:47 PM, Dániel Hufnágel : A két AGV blokkolja egymást, egy pillanat és megszűnik a dugó June 29, 2025 at 11:56 PM, Zagyva Tamás : Katód raktárba félúton megállt az anyag.Meg tudnátok nézni? June 29, 2025 at 11:57 PM, Farkas Tamàs : Megyünk June 30, 2025 at 12:10 AM June 30, 2025 at 12:10 AM, Marsi Gábor : Kész June 30, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.30. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(0): Sick(0): Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dánie --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Csanálosi Gábor NC OP(2): Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ------- June 30, 2025 at 8:29 AM, Varga Tamás Powder : Sziasztok a poron katod 1nél és 2es sornál megállt az AGV meg tudnátok nézni? Köszönöm June 30, 2025 at 8:29 AM, Rácz Dániel / FA : Megyek June 30, 2025 at 8:44 AM, Rácz Dániel / FA : @Varga Tamás Powder köszönöm a segítséget 🙏 June 30, 2025 at 11:47 AM, Varga Tamás Powder : Poron a katod 1es sornál az AGV megállt. Megnéznétek? Köszönöm June 30, 2025 at 11:50 AM, Czeilinger Krisztián : Megyek nemsokára . June 30, 2025 at 1:32 PM, Varga Tamás Powder : Poron katod 2nél megállt az AGV megnéznétek? Köszönöm June 30, 2025 at 1:47 PM, Szücs Géza FT-B : úton June 30, 2025 at 2:07 PM, Szücs Géza FT-B : Kész. AGV CA#2 térszenzor letakarítva June 30, 2025 at 2:58 PM, Mohammad Amir : @Szücs Géza FT-B Please check STK002_C01 there is Travel driver error. Thank you very much! June 30, 2025 at 2:58 PM, Kokhan Yurii : Sziasztok. A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 30, 2025 at 3:04 PM, Pálosi Róbert : Megyek June 30, 2025 at 3:05 PM, Böröcz Tamás : Megy már June 30, 2025 at 3:05 PM, Böröcz Tamás : Már nem te hanem az AGV June 30, 2025 at 3:06 PM, Kokhan Yurii : Köszönöm June 30, 2025 at 3:47 PM, Kokhan Yurii : Sziasztok. A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm June 30, 2025 at 3:50 PM, Rácz Dániel / FA : Megpróbáltok egy startot nyomni neki ? June 30, 2025 at 3:51 PM, Kokhan Yurii : Nem sikerült June 30, 2025 at 3:57 PM, Böröcz Tamás : Solved June 30, 2025 at 4:15 PM, Varga Tamás Powder : A poron katod oldalt az 1es sornál megállt az AGV . Megnéznétek? Köszönöm June 30, 2025 at 4:22 PM, Böröcz Tamás : Agv 1 és 3 solved June 30, 2025 at 4:27 PM, Böröcz Tamás : 1es sorra vitt anyagot de már van ott June 30, 2025 at 4:48 PM, Varga Tamás Powder : Poron katod oldalt a 2es sornál majdnem össze ment a 2 AGV. Megnéznétek? Köszönöm June 30, 2025 at 4:51 PM, Szücs Géza FT-B : megyek, le is fényképezem June 30, 2025 at 5:33 PM, Szücs Géza FT-B : kész mind a 3 hiba June 30, 2025 at 6:31 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 1, 2025 at 6:04 AM July 1, 2025 at 6:04 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.01. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): --------------- Electrode(3): Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ----------- July 1, 2025 at 6:58 AM, Varga Tamás Powder : Sziaaztok. A poron anod oldalt nem tette le a 4es soron a palettát. Megnéznétek? Köszönöm July 1, 2025 at 7:00 AM, Szücs Géza FT-B : szia, igen nézzük, AGV azt ütközőre panaszkodok. July 1, 2025 at 7:00 AM, Böröcz Tamás : Solved July 1, 2025 at 7:01 AM, Szücs Géza FT-B : már megy, de szeretném megkérdezni, hogy neki ment valaminek? July 1, 2025 at 7:02 AM, Varga Tamás Powder : Nem ment neki semminek. July 1, 2025 at 7:03 AM, Varga Tamás Powder : A 4es soron a port is sipolt, de nyomtam egy reset gombot. Valamiért bejelzett. July 1, 2025 at 7:54 AM, Varga Tamás Powder : Poron katod 2es sornál megállt az AGV megnéznétek? Köszönöm July 1, 2025 at 8:23 AM, Varga Tamás Powder : Poron katod 2es sornál megállt az AGV megnéznétek? Köszönöm July 1, 2025 at 8:28 AM, Rácz Dániel / FA : Kész July 1, 2025 at 8:28 AM, Rácz Dániel / FA : Kész July 1, 2025 at 9:43 AM, Varga Tamás Powder : Poron katod raktárba nem veszi le az anyagot. Megnéznétek? Köszönöm July 1, 2025 at 9:55 AM, Kokhan Yurii : Nézzétek meg légyszíves July 1, 2025 at 9:56 AM, Böröcz Tamás : 0f July 1, 2025 at 9:56 AM, Böröcz Tamás : Going up July 1, 2025 at 10:01 AM, Csanálosi Gábor FA : C2 agv lement a térképről July 1, 2025 at 10:33 AM, duzzaman Md (MCS) : @Fa Please check E0STKC12, light curtain detect error (scs) Thank you July 1, 2025 at 10:35 AM, Varga Tamás Powder : Poron katod 2es sornál megállt az AGV megnéznétek? Köszönöm July 1, 2025 at 10:38 AM, Rácz Dániel / FA : Megy July 1, 2025 at 10:41 AM, Varga Tamás Powder : Az 1es sornál is meg állt. Légyszives nézd meg. Köszönöm July 1, 2025 at 10:45 AM, Rácz Dániel / FA : Valamiért nem tud elindulni, July 1, 2025 at 10:47 AM, Varga Tamás Powder : 2 AGV van itt. Egymásnak útban vannak July 1, 2025 at 11:03 AM, Varga Tamás Powder : Forgalmi dugó alakult ki 😁 már 3 AGV van bent July 1, 2025 at 11:05 AM, Szücs Géza FT-B : Tamás úton van July 1, 2025 at 11:24 AM, Varga Tamás Powder : Poron katod 2es sornál megint megállt az AGV( mindig az 1es) az megnéznétek? Köszönöm July 1, 2025 at 11:27 AM, Böröcz Tamás : Már úton voltam July 1, 2025 at 11:27 AM, Böröcz Tamás : Csak valaki a liftben turta az orrát July 1, 2025 at 11:35 AM, Varga Tamás Powder : A poron katod raktárban nem veszi le az anyagot, várakozóban vannak az AGV-k. Légyszives nézzétek meg. Köszönöm July 1, 2025 at 11:35 AM, Rácz Dániel / FA : Nekem azt mondták a poron hétvégén minden rendben volt 😢 July 1, 2025 at 11:37 AM, Böröcz Tamás : Volt olyan aki meg tudott rajta nyomni két gombot és senki nem fenyegette meg hogy fegyelmit kap July 1, 2025 at 11:37 AM, Böröcz Tamás : Going baek July 1, 2025 at 11:48 AM, Rácz Dániel / FA : Anód oldalon megállt az 1es AVg July 1, 2025 at 11:49 AM, Rácz Dániel / FA : Kész July 1, 2025 at 11:57 AM, Böröcz Tamás : Fólia miatt nem volt jó a szenzoron a jel fóliát felhajtottam a raklap szélén és elindult July 1, 2025 at 11:59 AM, Rácz Dániel / FA : Sajnálom July 1, 2025 at 12:14 PM, Varga Tamás Powder : A poron katod 3as sornál ismét megállt az AGV. Megtudnátok nézni? Köszönöm July 1, 2025 at 12:20 PM, Varga Tamás Powder : Katod 2es sornál is megállt az AGV légyszives nézzétek meg. Köszönöm July 1, 2025 at 12:37 PM, Böröcz Tamás : Szóltunk a telepítő cégeseknek hogy megáll minden kanyarban July 1, 2025 at 12:37 PM, Böröcz Tamás : Azt mondták igen July 1, 2025 at 12:38 PM, Böröcz Tamás : Solved July 1, 2025 at 1:05 PM, Varga Tamás Powder : @duzzaman Md (MCS) hello. we requested material for the cathode 2nd row E1PLC021-P01 port, the light is flashing blue. it means there is no material. could you please check? thank you July 1, 2025 at 1:09 PM, duzzaman Md (MCS) : There's active job for this. It should be there soon. July 1, 2025 at 1:11 PM, Varga Tamás Powder : Okay thank you July 1, 2025 at 1:52 PM, Varga Tamás Powder : Poron 3as sornál az AGV megállt légyszives nézzétek meg. Kőszönöm July 1, 2025 at 1:52 PM, Varga Tamás Powder : Catode July 1, 2025 at 1:58 PM, Csanálosi Gábor FA : Nemsokára indulok July 1, 2025 at 3:01 PM, duzzaman Md (MCS) : @Fa Please check E0STKC12, Hoist time over error. Thank you July 1, 2025 at 3:12 PM, Varga Tamás Powder : Poron katod oldal az 1es sornál megállt az AGV légyazives nézzétek meg köszönöm July 1, 2025 at 3:12 PM, Rácz Dániel / FA : @Kokhan Yurii July 1, 2025 at 3:17 PM, Rácz Dániel / FA : Megyek July 1, 2025 at 3:17 PM, Rácz Dániel / FA : Boeing July 1, 2025 at 3:19 PM, Rácz Dániel / FA : @Szarka Adrián megyek July 1, 2025 at 3:19 PM, Rácz Dániel / FA : @방혁 PM(Bang.Hyuk) FA going July 1, 2025 at 3:20 PM, Rácz Dániel / FA : @Szücs Géza FT-B megyek July 1, 2025 at 3:20 PM, Rácz Dániel / FA : @Varga Tamás Powder megyek July 1, 2025 at 3:20 PM, Rácz Dániel / FA : @Csanálosi Gábor FA felmegyek porra July 1, 2025 at 3:21 PM, Rácz Dániel / FA : @Böröcz Tamás poron hiba van megyek oda July 1, 2025 at 3:21 PM, Csanálosi Gábor FA : Spammer July 1, 2025 at 3:35 PM, Rácz Dániel / FA : Mire felértem a porra és beöltöztem, már megoldódott a hiba. 😢 July 1, 2025 at 3:43 PM, Rácz Dániel / FA : Sloweed July 1, 2025 at 3:43 PM, 주범진 : @MCS/RTD Hello Can you please take the material out to gf? Ps112-2504010126 Ps112-2504010108 Unkemp-250620112948a Unkemp-250604160129a July 1, 2025 at 3:44 PM, 주범진 : And Umkemp-250403144345a July 1, 2025 at 3:44 PM, 주범진 : And Umkemp-250620120336a July 1, 2025 at 3:44 PM, duzzaman Md (MCS) : Could you please inform where you'd exactly like it to be July 1, 2025 at 3:45 PM, 주범진 : Gf port please July 1, 2025 at 3:55 PM, duzzaman Md (MCS) : Sent the first two. Could you please check the last 4 carriers you mentioned ? July 1, 2025 at 4:07 PM, 주범진 : It says 'source empty'status July 1, 2025 at 4:09 PM, 주범진 : And it is showed as light blue and red X July 1, 2025 at 4:09 PM, 주범진 : All letters are capital letters July 1, 2025 at 4:09 PM, 주범진 : Upper case July 1, 2025 at 4:14 PM, duzzaman Md (MCS) : Regrettably, we couldn't find those in MCS/RTD. July 1, 2025 at 4:14 PM, Böröcz Tamás : Because shelf is empty July 1, 2025 at 4:14 PM, 주범진 : Those 4 plt are empty? July 1, 2025 at 4:16 PM, Böröcz Tamás : Checking July 1, 2025 at 4:23 PM, Böröcz Tamás : Where was this error? I could not find. Maybe some1 solved it from away July 1, 2025 at 4:50 PM, Varga Tamás Powder : Poron a katod 1es sornál megint megállt az AGV légyszives nézzétek meg. Köszönöm July 1, 2025 at 4:58 PM, Csanálosi Gábor FA : Solved July 1, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 2, 2025 at 6:02 AM July 2, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 2, 2025 at 7:08 AM, Varga Zoltán : Jó reggelt AGV #1 megállt katód #2-nèl Nézzétek meg légyszi July 2, 2025 at 7:42 AM, Varga Zoltán : AGV megállt katód #1-nél nézzétek meg légyszi July 2, 2025 at 7:42 AM, Oláh András : Itt vagyunk 😁 July 2, 2025 at 7:50 AM, Horváth Tamás : Most már legalább az összes AGV áll Katód oldalt.💪💪 July 2, 2025 at 7:51 AM, Oláh András : Így legalább nem hibáznak July 2, 2025 at 7:56 AM, Horváth Tamás : De legalább a liba sor elején lévő is kiállt hibára.. July 2, 2025 at 7:57 AM, Oláh András : Mindjárt menni fog az 😁👍🏻 July 2, 2025 at 8:00 AM, Szabadi Miki : Mindjárt megyünk July 2, 2025 at 9:24 AM, Oláh András : @Horváth Tamás katódon legyetek szívesek elrakni a zsák gyűjtő raklapot mert megint kiállt hibára miatta az agv July 2, 2025 at 9:29 AM, Varga Zoltán : már nincs ott July 2, 2025 at 9:30 AM, Oláh András : Megyek fel agvhez July 2, 2025 at 10:09 AM, Varga Zoltán : Anód #2-nél AGV #3 nekiment a létrának gyertek légyszi köszönöm July 2, 2025 at 10:10 AM, Szabadi Miki : Megyünk July 2, 2025 at 10:45 AM, Varga Zoltán : Robot nem jó katód #3-nál segítséget szeretnék kérni July 2, 2025 at 10:50 AM, Szabadi Miki : 3nál a P01-re szeretne lepakolni de ott van anyag July 2, 2025 at 11:08 AM, Horváth Tamás : Katódon megállt a robot.. bent a por területen July 2, 2025 at 11:32 AM, Horváth Tamás : Katódon megállt az air showerbe.. elég érdekes írányba áll a technika megint July 2, 2025 at 12:01 PM, Oláh András : 👍🏻 July 2, 2025 at 1:16 PM, Horváth Tamás : Katódon megállt a robot a poron July 2, 2025 at 1:20 PM, Oláh András : Már nem July 2, 2025 at 1:20 PM, Horváth Tamás : Öntudatra ébredt a Skynet💪💪💪 July 2, 2025 at 1:21 PM, Oláh András : Azért rá segítettem ha nem gons July 2, 2025 at 1:21 PM, Oláh András : D July 2, 2025 at 1:21 PM, Horváth Tamás : Köszönöm✌️ July 2, 2025 at 1:26 PM, Oláh András : 🙏 July 2, 2025 at 1:30 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon meg állt a raktár. RTV-022 release nem vitte át az adatot a 01_010 CV_12 re. Segítséget kérek July 2, 2025 at 1:42 PM, Varga Zoltán : Helló katód 2-nèl AGV #1 megállt nézzétek meg légyszi July 2, 2025 at 1:44 PM, Horváth Tamás : Anódon a plac közepén is kapitulált. July 2, 2025 at 3:49 PM, Varga Zoltán : Katód 1-nél áll az AGV nézzétek meg légyszi July 2, 2025 at 3:50 PM, Oláh András : 🤓 July 2, 2025 at 3:51 PM, Oláh András : Már megyen is July 2, 2025 at 4:08 PM, Varga Zoltán : AGV #1 áll katódon help July 2, 2025 at 4:08 PM, Oláh András : Mindjárt megy csak meg kell várni míg kiáll hibára July 2, 2025 at 4:17 PM, Oláh András : Most már nagyon megy 👍🏻 July 2, 2025 at 6:29 PM, Zagyva Tamás : Jó napot Poron katód oldalon megállt a raktár.Nem rakta le a daru az anyagot.Meg tudnátok nézni? July 2, 2025 at 6:30 PM, Mohammad Amir : @FA Please check STKC13_C01 there is ready off during Forking error and powder delivery is being delayed. Thank you very much! July 2, 2025 at 6:31 PM, Marsi Gábor : Megyek July 2, 2025 at 6:40 PM, Marsi Gábor : Done July 2, 2025 at 6:40 PM, Mohammad Amir : Thank you very much! July 2, 2025 at 7:47 PM, Rózsavölgyi Attila : Hello Poron katód oldalon megállt a raktár. Meg tudnátok nézni? July 2, 2025 at 8:17 PM, Zagyva Tamás : Tudtok jönni megnézni? July 2, 2025 at 8:19 PM, Simon Attila F. A. : Persze. Megyünk. July 2, 2025 at 8:32 PM, Mohammad Amir : @Simon Attila F. A. Please check STKA11_C01 there is MCP Control Power CP trip error. Thank you very much! July 2, 2025 at 8:32 PM, Simon Attila F. A. : M college on the way... July 2, 2025 at 8:34 PM, Marsi Gábor : Done July 2, 2025 at 8:34 PM, Mohammad Amir : Thank you very much! July 2, 2025 at 8:54 PM, Mohammad Amir : @FA Please check this issue again exists. Thank you! July 2, 2025 at 11:45 PM, Rózsavölgyi Attila : Hali por Anodon a raktárnál megált az AGV meg nézitek? July 2, 2025 at 11:47 PM, Marsi Gábor : Megyek July 3, 2025 at 12:42 AM July 3, 2025 at 12:42 AM, Zagyva Tamás : Poron katód oldalon a raktárnál lerobbantak a robotok.Megnézitek? July 3, 2025 at 12:42 AM, Marsi Gábor : Nézem July 3, 2025 at 5:58 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(4) Oláh András , Kiss Balázs, Szabadi Miklós, Novák Károly Assembly(4): GF: Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 3, 2025 at 10:31 AM, Varga Zoltán : Sziasztok AGV állnak anód raktár előtt nézzétek meg légyszi köszönöm July 3, 2025 at 10:31 AM, Oláh András : Kis türelem mindjárt megnézem July 3, 2025 at 10:42 AM, Oláh András : Elinditottam mindent, de lehet még lesznek megállások. Ha jól olvastam figyelik a poron az acs kommunikációt July 3, 2025 at 10:47 AM, Jun(정우준)_SKOH FA : now we are testing the Powder Anode ACS CIM server, manual failover. so all agvs sometimes can be stopped. July 3, 2025 at 11:09 AM, Jun(정우준)_SKOH FA : finished July 3, 2025 at 12:13 PM, Horváth Tamás : Sziaszzok. Erre a portra kértem anyagot és nem jön E1plc031 p02es port. Megtudnátok nézni mi lehet a baj? July 3, 2025 at 12:14 PM, Oláh András : @mcs July 3, 2025 at 12:17 PM, Oláh András : @Mohammad Amir July 3, 2025 at 1:01 PM, Horváth Tamás : A probléma még aktuális.. July 3, 2025 at 1:02 PM, Oláh András : @Shahbaz 샤바즈 MCS/RTD July 3, 2025 at 1:09 PM, duzzaman Md (MCS) : Checking July 3, 2025 at 1:12 PM, duzzaman Md (MCS) : No materials available July 3, 2025 at 5:20 PM, Zagyva Tamás : Poron katod oldalon állnak a raktárnál a robotok.Meg tudnátok nézni? July 3, 2025 at 5:22 PM, Oláh András : Természetesen July 3, 2025 at 5:57 PM, Zagyva Tamás : Poron katod oldalon állnak a raktárnál a robotok.Meg tudnátok nézni? July 3, 2025 at 5:58 PM, Marsi Gábor : Megyek. Ez azóta fennálló hiba? July 3, 2025 at 5:59 PM, Zagyva Tamás : Ez egy új July 3, 2025 at 6:00 PM, Zagyva Tamás : Le akarta venni a raklapot de a raklap beljebb van fél méterrel és csak az elejét emelte fel July 3, 2025 at 6:12 PM, Marsi Gábor : Kész July 3, 2025 at 7:21 PM, Rózsavölgyi Attila : Hali a Por Anod oldalon az AGV az Air Shower-ben megált meg nézitek? Köszönöm. July 3, 2025 at 7:21 PM, Marsi Gábor : Megyek July 3, 2025 at 7:30 PM, Marsi Gábor : Kész July 3, 2025 at 8:26 PM, Zagyva Tamás : Poron anod airshowerbe megállt a robot.Be tudnátok bikázni? July 3, 2025 at 8:26 PM, Marsi Gábor : Megyünk July 3, 2025 at 8:42 PM, Marsi Gábor : Kész July 3, 2025 at 9:35 PM, Powder tréner : @Mohammad Amir Hello Can you tell me what material is in the Anod warehouse released with this code 112-00247A. July 3, 2025 at 9:37 PM, VK (mcs) : Do you mean quantity of material? July 3, 2025 at 9:38 PM, Powder tréner : Yes July 3, 2025 at 9:39 PM, VK (mcs) : Number of pallets available is 52 Product definition ID: 112-00247A July 3, 2025 at 9:42 PM, Zagyva Tamás : Material 11200247A is not delivered to port E1PLA031_P01 July 3, 2025 at 9:43 PM, VK (mcs) : There is no load request. Last one was at 10:54 AM July 3, 2025 at 9:45 PM, Zagyva Tamás : I press the call button again. July 3, 2025 at 9:47 PM, Zagyva Tamás : 1 minute July 3, 2025 at 9:47 PM, VK (mcs) : Unfortunately we still have not received LR July 3, 2025 at 9:48 PM, Zagyva Tamás : Moment please July 3, 2025 at 9:50 PM, Zagyva Tamás : Is it good now? July 3, 2025 at 9:50 PM, VK (mcs) : LR received and pallet has been assigned from STK A13 July 3, 2025 at 9:51 PM, VK (mcs) : STK12* July 3, 2025 at 9:51 PM, Zagyva Tamás : Oke July 3, 2025 at 9:52 PM, Zagyva Tamás : Thank you July 3, 2025 at 10:23 PM, VK (mcs) : @FA Please check Cathode powder STK C12 Hoist time over error. July 3, 2025 at 10:27 PM, Zagyva Tamás : I pressed the LR button again, but the warehouse is not delivering material. July 3, 2025 at 10:29 PM, VK (mcs) : @FA Please check AGV#1 Anode mixing area, between 3rd and 4th line. Thx July 3, 2025 at 10:30 PM, VK (mcs) : No need, it is solved now. Thx July 3, 2025 at 10:31 PM, Zagyva Tamás : Ready July 3, 2025 at 10:32 PM, Zagyva Tamás : @VK (mcs) The warehouse does not issue material on the cathode side. July 3, 2025 at 10:33 PM, VK (mcs) : STKC12 is out of service. I already informed to @FA team. July 4, 2025 at 4:53 AM July 4, 2025 at 4:53 AM, Zagyva Tamás : Poron anód oldalon a raktárból kijövő anyag nem akar rámenni a transzfer kocsira.Meg tudjátok nézni? July 4, 2025 at 4:57 AM, Simon Attila F. A. : Megyünk. July 4, 2025 at 5:08 AM, Marsi Gábor : Kész July 4, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.04. 10+2/12+2 Tech, 1Sl, 1Sup. Overtime(1): Szabadi Miklós Holiday(2): Gerbovits Kevin, Böröcz Tamás Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János July 4, 2025 at 7:20 AM, Varga Tamás Powder : Sziasztok. A poron anod oldalt a 2es AGV állandóan ki áll hibára. Légyszives nézzétek meg, köszönöm July 4, 2025 at 7:21 AM, Szücs Géza FT-B : @Szabadi Miki úton van July 4, 2025 at 9:07 AM, Varga Tamás Powder : Poron anod oldalt a 6os sornál megállt az AGV légyszives nézzétek meg. Köszönöm July 4, 2025 at 9:15 AM, Rácz Dániel / FA : Nem sokára érkezünk July 4, 2025 at 10:40 AM, Szarka Adrián : @Szücs Géza FT-B 3 korai FA Kollega ( narancs sárga sapkás ) anod airshower ajtaját manuálisan feszegették és szét esett az ajtó. July 4, 2025 at 10:41 AM, Szücs Géza FT-B : köszönöm szépen az információt July 4, 2025 at 10:42 AM, Szarka Adrián : Fotót csinált róla @Kokhan Yurii July 4, 2025 at 10:42 AM, Szücs Géza FT-B : és most akkor használhatatlan az ajtó? July 4, 2025 at 10:42 AM, Szücs Géza FT-B : ez lett volna a másik kérdés, kösszi July 4, 2025 at 10:43 AM, Szarka Adrián : Egyenlőre nem. Szét van szakadva az ajtó Yurii most mutatja July 4, 2025 at 10:44 AM, Szarka Adrián : Nevüket meg tudod szerezni akik ma fent voltak itt @Szücs Géza FT-B July 4, 2025 at 10:49 AM, Szarka Adrián : Mert úgy el tűntek az ajtó törés után mint az arany óra. July 4, 2025 at 10:49 AM, Szarka Adrián : Szerintünk kelleni is fog fel segítség mert ezek után manuális munka lesz szerintünk July 4, 2025 at 10:50 AM, Szücs Géza FT-B : megyek fel July 4, 2025 at 10:50 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA July 4, 2025 at 10:52 AM, Szücs Géza FT-B : FA 담당 한국인(주황색 모자 쓴) 3 명은 음극 에어샤워 문을 손으로 열려보다가 문이 파손되었습니다. July 4, 2025 at 10:53 AM, Szarka Adrián : Most meg jelent egy másik koreai Kollega sárga sapkás de lehet kéne egy tolmács is hogy beszélni vele hogy történt. July 4, 2025 at 10:54 AM, 방혁 PM(Bang.Hyuk) FA : Omg July 4, 2025 at 11:51 AM, Szücs Géza FT-B : AN airshower kész July 4, 2025 at 1:00 PM, Varga Tamás Powder : @Mohammad Amir hello. the light is flashing blue at port E1PLA021_P01 on anode row 2. would you like to check if there is material in the warehouse? M36H: 112-00237A. thank you July 4, 2025 at 1:00 PM, Mohammad Amir : Checking July 4, 2025 at 1:05 PM, Mohammad Amir : @FA @Szücs Géza FT-B Please check PS112-2504150151 located at E0CNVA12_P07,it has job to go to E1PLA021_P01 ,AGV#1 has assigned at 12:54 but after AGV did not pick the material , please check Port P07. Everything is good from MCS RTD side ✅. Thank you very much! July 4, 2025 at 1:06 PM, Mohammad Amir : @Varga Tamás Powder Currently we have 126 materials available, however because of this issue you witnessed delay. Thank you very much! July 4, 2025 at 1:09 PM, Mohammad Amir : Now issue has been resolved ✅ And AGV #1 on the way with powder Material to E1PLA021_P01. Thank you very much! July 4, 2025 at 1:16 PM, Varga Tamás Powder : Okay Thank you very much. July 4, 2025 at 1:25 PM, Mohammad Amir : You are welcome! July 4, 2025 at 2:36 PM, Kokhan Yurii : Sziasztok. a robot nem veszi el a port a raktárból anod oldal. Nézzétek meg légyszíves. Köszönöm July 4, 2025 at 2:41 PM, Szabadi Miki : Megyünk July 4, 2025 at 2:41 PM, Szücs Géza FT-B : úton a segítség July 4, 2025 at 4:00 PM, Varga Tamás Powder : Poron anod oldalt a 2es soron letette az AGV a palettát és kiállt hibára. Nézzétek meg légyszives. Köszönöm July 4, 2025 at 4:03 PM, Szabadi Miki : Megyünk July 4, 2025 at 4:05 PM, Rácz Dániel / FA : Solved July 4, 2025 at 4:05 PM, Rácz Dániel / FA : Már megy is 🤗 July 4, 2025 at 4:06 PM, Rácz Dániel / FA : Ne menjetek 😉 July 4, 2025 at 4:07 PM, Szabadi Miki : Annyira jo vagy 🙃 July 4, 2025 at 4:39 PM, Kokhan Yurii : Sziasztok. A Poron területén katod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm July 4, 2025 at 4:41 PM, Rácz Dániel / FA : Fork bumpet #1 error July 4, 2025 at 4:41 PM, Szücs Géza FT-B : elindultak July 4, 2025 at 4:55 PM, Csanálosi Gábor FA : Kész July 4, 2025 at 5:02 PM, Kokhan Yurii : Köszönöm July 4, 2025 at 5:22 PM, Rácz Dániel / FA : @Varga Tamás Powder 4es soron várakozik a 2es AGV, mert még van ott raklap, köszi. July 4, 2025 at 5:22 PM, Varga Tamás Powder : Tudom :) pont ott voltam 😉 July 4, 2025 at 5:23 PM, Rácz Dániel / FA : Köszi July 4, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 4, 2025 at 9:08 PM, Nazirov Eldar : Sziasztok szeretnék kérnek segítsék porra az AGV Fel akart venni egy raklapot a raktárból, de nem tudta , ezért ellökte magától. Köszönöm July 4, 2025 at 9:11 PM, adambenczik : Megyünk July 5, 2025 at 3:22 AM July 5, 2025 at 3:22 AM, Powder tréner : Sziasztok szeretnék segítséget kérni powder anod 4 sor melet megált 3 AGV. July 5, 2025 at 6:30 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.05. 10+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Gerbovits Kevin Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János, Boromisza Zoltán --------- July 5, 2025 at 7:05 AM, Rácz Dániel / FA : @Czeilinger Krisztián menj fel légyszíves a porra. Anód oldalon megállt a #2 es AGV az airshower ben. Köszi July 5, 2025 at 7:05 AM, Czeilinger Krisztián : Rendben. July 5, 2025 at 7:30 AM, Czeilinger Krisztián : This message was deleted. July 5, 2025 at 2:23 PM, Varga Tamás Powder : Sziasztok a poron anod oldalt a raktárban megállt az AGV. Megtudnátok nézni? Köszönöm July 5, 2025 at 2:24 PM, Rácz Dániel / FA : Megyek July 5, 2025 at 2:50 PM, Rácz Dániel / FA : Megy July 5, 2025 at 3:07 PM, Kokhan Yurii : Sziasztok a poron katod oldalt a raktárban megállt az AGV. Megtudnátok nézni? Köszönöm July 5, 2025 at 3:20 PM, Rácz Dániel / FA : Megy July 5, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Sopronyi Gábor Attila Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Novák Károly Novák Zoltán ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 1:54 AM July 6, 2025 at 1:54 AM, VK (mcs) : @FA Please check Cathode powder STK C11 Hoist time over error. July 6, 2025 at 2:34 AM, adambenczik : Solved July 6, 2025 at 6:32 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.06. 9+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Denkó János Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(1): Boromisza Zoltán ------------ July 6, 2025 at 6:45 AM, Varga Tamás Powder : Sziasztok. A poron katod oldalt az 1es AGV kiáll hibára majd ujra elindul. Megtudnátok nézni? Köszönöm July 6, 2025 at 6:46 AM, Czeilinger Krisztián : Megyek. July 6, 2025 at 7:03 AM, Kokhan Yurii : Sziasztok. A Poron területén Anod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 6, 2025 at 7:06 AM, Czeilinger Krisztián : Megyek July 6, 2025 at 7:14 AM, Csanálosi Gábor FA : Ca oldalon az 1-es is áll @Czeilinger Krisztián July 6, 2025 at 7:22 AM, Czeilinger Krisztián : Csinálom. July 6, 2025 at 7:40 AM, Rácz Dániel / FA : Az 1-es soron az AGV #1 azért nem teszi le a palettát, mert van már ott anyag. Létszíves vegyétek el onnan. Köszönöm. July 6, 2025 at 7:53 AM, Varga Tamás Powder : Pont most mondtam a kollégának 🙂 kaja után elvesszük onnan🙂 July 6, 2025 at 9:10 AM, Varga Tamás Powder : A poron katod oldalt befele jövet az AGV neki ment az air shower termelés felöli oldalt. Nézzétek meg légyszives July 6, 2025 at 9:13 AM, Rácz Dániel / FA : Jövok July 6, 2025 at 9:15 AM, Szücs Géza FT-B : negyerw July 6, 2025 at 9:15 AM, Szücs Géza FT-B : itt vagyunk July 6, 2025 at 9:16 AM, Rácz Dániel / FA : Köszönöm 🙏 July 6, 2025 at 9:39 AM, Szücs Géza FT-B : kész July 6, 2025 at 10:03 AM, Varga Tamás Powder : Poron katod 1es sornál megállt az AGV légyszives nézzétek meg. Köszönöm July 6, 2025 at 11:27 AM, Varga Tamás Powder : A poron katod oldalt a raktár nem adja ki az anyagot megnéznétek légyszives? Köszönöm July 6, 2025 at 11:29 AM, Czeilinger Krisztián : Nem sokára megyek. July 6, 2025 at 11:32 AM, Czeilinger Krisztián : Megyek July 6, 2025 at 11:36 AM, Rácz Dániel / FA : Már elindult a Krisztián July 6, 2025 at 11:39 AM, Czeilinger Krisztián : Dániel köszi az infót. July 6, 2025 at 4:53 PM, Szücs Géza FT-B : nem tudok ide invitálni. @Szarka Adrián , te tudsz? July 6, 2025 at 5:06 PM, Szarka Adrián : ? July 6, 2025 at 5:06 PM, Szarka Adrián : @Szücs Géza FT-B July 6, 2025 at 5:08 PM, Szücs Géza FT-B : embert behívni a csoportban July 6, 2025 at 5:08 PM, Szücs Géza FT-B : ba* July 6, 2025 at 5:12 PM, Szarka Adrián : Azt értem de elvileg tudok. Kit kéne írj privatba July 6, 2025 at 5:12 PM, Szarka Adrián : (thumbsup)(thumbsup) July 6, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Gutenkunst Ábel Zoltán Benczik Ádám Bonnyai Ákos ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 6:51 PM, Powder tréner : Sziasztok szeretnék kérni segítséget a poron anód raktár nem adja ki az anyagot E1PLA041_P01 portra July 6, 2025 at 6:54 PM, Nazirov Eldar : Sürgősen ellenőriznünk kell ezt, mert szükségünk van az anyagra! July 6, 2025 at 6:54 PM, Mr.Miti (미티) FA : @VK (mcs) Please check avaible matrtials July 6, 2025 at 6:55 PM, Mohammad Amir : For E1PLA041_P01, Warehouse is not issuing the materials because we didn't receive Load request for materials. Last task was completed at 18:42. Please press LR again. Currently we have 37 materials available to be tranferred. Thank you very much! July 6, 2025 at 6:55 PM, Mohammad Amir : @Mr.Miti (미티) FA Good evening, For your information. Thank you very much! July 6, 2025 at 6:56 PM, Mr.Miti (미티) FA : Thank you July 6, 2025 at 6:56 PM, Mohammad Amir : You are welcome! July 6, 2025 at 7:02 PM, Mr.Miti (미티) FA : @Mohammad Amir E1PLA041_P02 Please check if this material is available here. July 6, 2025 at 7:02 PM, Mohammad Amir : Sure Checking! July 6, 2025 at 7:02 PM, Mr.Miti (미티) FA : Thank you July 6, 2025 at 7:03 PM, Mr.Miti (미티) FA : And E1PLA031_P01 to Thank you very much! July 6, 2025 at 7:03 PM, Nazirov Eldar : Nem az kell ezt kell E1PLA041_P02 July 6, 2025 at 7:04 PM, Mr.Miti (미티) FA : Mind a kettőt nézi nyugodj meg! July 6, 2025 at 7:04 PM, Nazirov Eldar : Én nyugodt vagyok tesó July 6, 2025 at 7:04 PM, Mohammad Amir : For E1PLA041_P02, There are currently no materials available which can be Transferred to the process machine. However we have 12 powder materials for this Port but all of this materials are expired that's why we can't release it. Thank you very much! July 6, 2025 at 7:04 PM, Mohammad Amir : @Nazirov Eldar For your information. Thank you very much! July 6, 2025 at 7:05 PM, Mohammad Amir : For E1PLA031_P01, Same situation exists,There are currently no materials available which can be Transferred to the process machine. However we have 12 powder materials for this Port but all of these materials are expired that's why we can't release it. Thank you very much! July 6, 2025 at 7:05 PM, Nazirov Eldar : @장영환(Younghwan Chang) July 6, 2025 at 7:07 PM, Nazirov Eldar : Hello, Check please July 6, 2025 at 7:07 PM, Mohammad Amir : Hello, Still same situation exists,we don't have any powder materials which we can transfer. Thank you very much! July 6, 2025 at 7:37 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check E0STKC12_C01 there is Hoist Driver Error. Thank you very much! July 6, 2025 at 7:47 PM, Mohammad Amir : @Powder tréner For your information This is the issue for delay in powder materials travefer for E1PLC011_P01/02. Thank you very much! July 6, 2025 at 7:57 PM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check this issue,it still exists and because of this two jobs are pending. Thank you very much! July 6, 2025 at 8:05 PM, adambenczik : Solved July 7, 2025 at 6:16 AM July 7, 2025 at 6:16 AM, Zagyva Tamás : Jó reggelt Poron anód raktárnál megállt a robot.Nézzétek meg lécci July 7, 2025 at 6:18 AM, Farkas Tamàs : Megyünk July 7, 2025 at 6:19 AM, Zagyva Tamás : Bent a területen is áll az egyik az anódon.Teljesen keresztbe volt fordulva July 7, 2025 at 6:20 AM, Farkas Tamàs : Rendben July 7, 2025 at 8:46 AM, Powder tréner : Hali a poron anod és katod oldalon a tűzgátló fügöny lent vannak fel huznátok léci köszi July 7, 2025 at 8:46 AM, Marsi Gábor : Megyek July 7, 2025 at 1:04 PM, 주범진 : @mcs Hello @MCS/RTD Hello Can you please take the material out to electrode GF port Shelf 02-218-05 UNKUP-PS111-2503280090-25072150831B Shelf 01-020-07 PS111-2503280090-250702150831A July 7, 2025 at 1:06 PM, 주범진 : @Mohammad Amir @Sazzad Bhai SKon @Shahbaz 샤바즈 MCS/RTD @Shakir (MCS) @duzzaman Md (MCS) July 7, 2025 at 1:10 PM, duzzaman Md (MCS) : This message was deleted. July 7, 2025 at 1:10 PM, 주범진 : Stk c1 July 7, 2025 at 1:12 PM, Sazzad Bhai SKon : E0STKC11 (0102007, 0201805) Will send to gf M03 July 7, 2025 at 1:18 PM, 주범진 : We are ready, please make the job July 7, 2025 at 1:21 PM, duzzaman Md (MCS) : Both created. Thank you July 7, 2025 at 1:21 PM, 주범진 : Thank you July 7, 2025 at 1:26 PM, 주범진 : This message was deleted. July 7, 2025 at 2:43 PM, 주범진 : @Mr.Miti (미티) FA @Dániel Hufnágel hello Can you please arrange someone to put the material down on the floor at electrode 1f? We have to take 4M powder out from warehouse manually July 7, 2025 at 2:45 PM, Baek Hojong(백호종)FA : @Farkas Tamàs @Mr.Miti (미티) FA @Dániel Hufnágel hello Can you please arrange someone to put the material down on the floor at electrode 1f? We have to take 4M powder out from warehouse manually July 7, 2025 at 2:47 PM, Farkas Tamàs : I am going. July 7, 2025 at 2:48 PM, Farkas Tamàs : AN, CA? July 7, 2025 at 2:48 PM, 주범진 : 감사합니다 thank you July 7, 2025 at 2:48 PM, 주범진 : Ca July 7, 2025 at 2:48 PM, Farkas Tamàs : Ok July 7, 2025 at 2:50 PM, 주범진 : @Sazzad Bhai SKon can you please make the job to 1f port? PS311-2506250001 ~ PS311-2506250012 Total 12plt July 7, 2025 at 2:58 PM, duzzaman Md (MCS) : PS311-*****011 is not in the STK. Sent the rest 11. Thank you July 7, 2025 at 3:02 PM, Farkas Tamàs : I'm here. Who's coming for the materials? July 7, 2025 at 3:05 PM, 주범진 : @Powder tréner @Zagyva Tamás can you please check with him? July 7, 2025 at 3:06 PM, Zagyva Tamás : I'm at a meeting. There's a powder trainer in the area. July 7, 2025 at 3:09 PM, Farkas Tamàs : Ok, köszi July 7, 2025 at 3:47 PM, Zagyva Tamás : Volt lent a trainer? July 7, 2025 at 3:48 PM, Farkas Tamàs : Volt itt July 7, 2025 at 3:49 PM, Farkas Tamàs : Már le is van szedve mind a 11paletta July 7, 2025 at 3:49 PM, Zagyva Tamás : Oké July 7, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 7, 2025 at 7:09 PM, Horváth Tamás : Sziasztok. Katód oldalt a raktárnál megállt a robot a poron.✌️ July 7, 2025 at 7:11 PM, Dániel Hufnágel : Halihó July 7, 2025 at 7:11 PM, Dániel Hufnágel : Megyek July 7, 2025 at 9:30 PM, Varga Zoltán : Sziasztok katód #1-nél AGV megállt nézzétek meg légyszi köszönöm July 7, 2025 at 9:35 PM, Oláh András : Megyünk July 7, 2025 at 10:24 PM, VK (mcs) : @FA Please check Anode powder STK A13 MCP control power CP trip. July 7, 2025 at 10:25 PM, Oláh András : Going July 8, 2025 at 12:12 AM July 8, 2025 at 12:12 AM, Varga Zoltán : Sziasztok AGV #3 megállt katód 1-nél. Nézzétek meg légyszi July 8, 2025 at 12:17 AM, Szabadi Miki : Nemsoká megyünk July 8, 2025 at 4:44 AM, Varga Zoltán : Helló AGV megállt anód Air showerben nézzétek meg légyszi köszönöm July 8, 2025 at 4:45 AM, Oláh András : Nyissátok ki neki a belső ajtót July 8, 2025 at 4:45 AM, Varga Zoltán : Air shower mindkét oldalon nyitva July 8, 2025 at 4:45 AM, Oláh András : Akkor ott megint air shower hiba lesz July 8, 2025 at 4:46 AM, Oláh András : Acs szerint zöldben van July 8, 2025 at 4:46 AM, Horváth Tamás : Ki kellene vinni a robotot, mert tárva nyítva van minden✌️ July 8, 2025 at 4:47 AM, Oláh András : Nem az agv miatt nem csukódik az ajtó July 8, 2025 at 4:47 AM, Horváth Tamás : Értem... de itt villog pirosan az air showerba July 8, 2025 at 4:47 AM, Oláh András : Valamelyik fényfüggöny lesz a ludas, de megyek megnézem July 8, 2025 at 4:48 AM, Horváth Tamás : Megnéztem a belsö is müködik.. mind a kettő zölden világít, ha benyulok piros lesz a fénykapu July 8, 2025 at 5:19 AM, VK (mcs) : @FA Please check Anode powder STK A12 MCP control power CP trip July 8, 2025 at 5:37 AM, Horváth Tamás : Ebből kifolyolag. A probléma nem szünt meg. Manuláisan kellene kiszedni az alapanyagokat az alapanyagraktárból. July 8, 2025 at 5:43 AM, Horváth Tamás : Úgyhogy itt kellene kezdeni a kollegáknak. July 8, 2025 at 5:44 AM, Dániel Hufnágel : Úgy adom át feltétlenül July 8, 2025 at 5:56 AM, 정연동 left this chatroom. July 8, 2025 at 5:59 AM, Oláh András : A12 darut nem tudtam vissza indítani. Főkapcsolo lekapcsolás után már visszakapcsolni se tudtam bocsi 🥲 July 8, 2025 at 6:04 AM, Powder tréner : Hello! I would like to ask for these materials: 10 pallets 112-00237A (M36H_BTR) 10 pallets 112-00239A (BSK-10T_BTR) July 8, 2025 at 6:05 AM, Shakir (MCS) : Hello, Good morning Working on it Thank you July 8, 2025 at 6:05 AM, Powder tréner : Sziasztok Kérnék segítséget a paletták levételéhez Köszönöm. July 8, 2025 at 6:07 AM, Farkas Tamàs : Megyünk July 8, 2025 at 6:13 AM, Shakir (MCS) : @FA Please check ESTKA12_C01 there is SCP Main Power CP trip error. Thank you July 8, 2025 at 6:31 AM, Farkas Tamàs : Done July 8, 2025 at 7:01 AM, Rózsavölgyi Attila : @Shakir (MCS) Hello, the raw material you requested is not in stock. July 8, 2025 at 7:03 AM, Shakir (MCS) : Lot is available, But there is already automatic jobs created. July 8, 2025 at 7:06 AM, Rózsavölgyi Attila : Thank you July 8, 2025 at 7:27 AM, Powder tréner : This message was deleted. July 8, 2025 at 7:28 AM, Powder tréner : I don't need any more manual feedstock July 8, 2025 at 7:51 AM, Powder tréner : No material has arrived for Anod E1PLA021_P01 112-00237A (M36H_BTR) ,I need it. July 8, 2025 at 7:53 AM, Powder tréner : @Shakir (MCS) please check July 8, 2025 at 7:53 AM, Shakir (MCS) : Checking July 8, 2025 at 7:56 AM, Shakir (MCS) : I am releasing pallets to E0CNVA12_P07 July 8, 2025 at 7:59 AM, Powder tréner : Okay thanks July 8, 2025 at 8:05 AM, Shakir (MCS) : I have released 10 pallets of M36H_BTR July 8, 2025 at 8:08 AM, Shakir (MCS) : @Powder tréner Please let me know if you need 10 pallets 112-00239A (BSK-10T_BTR) Thank you July 8, 2025 at 11:27 AM, Zagyva Tamás : @Shakir (MCS) Powder does not transfer powder to E1PLA021_P01, even though we pressed the LR button. Can you help? July 8, 2025 at 11:27 AM, Shakir (MCS) : Checking July 8, 2025 at 11:28 AM, Zagyva Tamás : we just manually added a material there July 8, 2025 at 11:30 AM, Zagyva Tamás : Now checking please July 8, 2025 at 11:34 AM, Shakir (MCS) : This message was deleted. July 8, 2025 at 11:34 AM, Shakir (MCS) : Issue has been resolved now Job initiated Thank you July 8, 2025 at 11:35 AM, Zagyva Tamás : Thank you👍 July 8, 2025 at 11:39 AM, Shakir (MCS) : AGV02 on the way ✅ Thanks July 8, 2025 at 11:40 AM, Shakir (MCS) invited MCS/RTD System. July 8, 2025 at 3:16 PM, 주범진 : @Mr.Miti (미티) FA @Dániel Hufnágel @김주연 hello Can you please arrange someone to put the material down on the floor at electrode 1f? This was deleted carrier id information PS111-2503180189 July 8, 2025 at 3:17 PM, Farkas Tamàs : Yes, I am going July 8, 2025 at 3:18 PM, 주범진 : @Zagyva Tamás can please load this powder first? It's about to expire July 8, 2025 at 3:19 PM, Zagyva Tamás : Yes July 8, 2025 at 3:39 PM, Zagyva Tamás : @Shakir (MCS) Please manually issue pallet PS111-2503180189 from the cathode warehouse. July 8, 2025 at 3:45 PM, Shakir (MCS) : There is no information about this pallet in MCS/RTD. No pallet with this id Thanks July 8, 2025 at 3:48 PM, Zagyva Tamás : @주범진 July 8, 2025 at 3:52 PM, 주범진 : Because this carrier id was deleted July 8, 2025 at 3:53 PM, 주범진 : But it is placed on the stkc3 July 8, 2025 at 3:54 PM, 주범진 : You can tell iff you seach on stk scs July 8, 2025 at 3:55 PM, Shakir (MCS) : Checking July 8, 2025 at 3:55 PM, Zagyva Tamás : We found July 8, 2025 at 3:57 PM, Zagyva Tamás : Located on shelf 0202206 July 8, 2025 at 4:00 PM, Zagyva Tamás : @Shakir (MCS) Please release it from the warehouse. July 8, 2025 at 4:00 PM, Shakir (MCS) : Working on it July 8, 2025 at 4:04 PM, Shakir (MCS) : Where you want this pallet GF or 1F? July 8, 2025 at 4:04 PM, Zagyva Tamás : 1F July 8, 2025 at 4:06 PM, Shakir (MCS) : Released to E0CNVC12_P07 July 8, 2025 at 4:07 PM, Shakir (MCS) : Pallet on the way July 8, 2025 at 4:07 PM, Zagyva Tamás : Thank you July 8, 2025 at 4:08 PM, Shakir (MCS) : You’re welcome July 8, 2025 at 5:53 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(1): Novák Károly Elektróda:(2) Oláh András, Szabadi Miklós, Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 8, 2025 at 6:31 PM, Horváth Tamás : Sziasztok. Szép estét. Katódon a poron megállt a robot bent a területen July 8, 2025 at 6:32 PM, Oláh András : Szia July 8, 2025 at 6:32 PM, Dániel Hufnágel : Jó estét! Kis türelmet kérünk, elfoglaltak vagyunk nagyon July 8, 2025 at 6:33 PM, Szabadi Miki : Már megy is July 8, 2025 at 6:34 PM, Horváth Tamás : Köszi✌️🙂 July 8, 2025 at 6:56 PM, Horváth Tamás : Katódra kellene egy távgyógyítás a poron ha lehetséges July 8, 2025 at 7:13 PM, Oláh András : Ment a távgyógyítás, viszont ahogy beér az agv a 3as sorra gyorsan be is kellene tölteni mert rá küldtem még 1 raklapot a P2-re 😁 July 8, 2025 at 8:47 PM, Horváth Tamás : Katódon megállt a robot a poron. Bent a területen. July 8, 2025 at 8:48 PM, Oláh András : Megnézem mit tehetek July 8, 2025 at 8:54 PM, Horváth Tamás : Kifeküdt kettő is a Katódon July 8, 2025 at 8:54 PM, Oláh András : Dehogy feküdt July 8, 2025 at 8:54 PM, Oláh András : Csak nyugalom July 8, 2025 at 8:55 PM, Oláh András : Állandóan felzaklatjátok őket az a baj🤣 July 8, 2025 at 9:00 PM, Horváth Tamás : Dolgoznának a fiúk🤷😅 July 8, 2025 at 10:29 PM, Powder tréner : Sziasztok ,a poron anod raktár nem adja ki az anyagot E1PLA021_P01,E1PLA011_P01 portokra.Nézétek rá.Köszönöm. July 8, 2025 at 10:29 PM, Szabadi Miki : @Mohammad Amir please check this thank you July 8, 2025 at 10:30 PM, Mohammad Amir : Sure, checking! July 8, 2025 at 10:31 PM, Mohammad Amir : For both machines:- Unfortunately we don't have enough Materials in the warehouse which can be transfer. As soon as material will be available it will transfer as we have an active LR. Thank you very much! July 8, 2025 at 10:38 PM, Mohammad Amir : @Szabadi Miki For your information as well. Thank you very much! July 8, 2025 at 10:58 PM, Horváth Tamás : Sziasztok a helyzet nem változott July 8, 2025 at 10:58 PM, Oláh András : Mindjárt megnézzük July 8, 2025 at 10:59 PM, Horváth Tamás : Köszi July 8, 2025 at 10:59 PM, Szabadi Miki : Irta az mcs kollége nincs anyag July 8, 2025 at 11:00 PM, Mohammad Amir : Unfortunately still there is no material. As soon as materials will be available it will be delivered as there is already an active LR. Thank you very much! July 8, 2025 at 11:09 PM, Janos R. MX SL : @장영환(Younghwan Chang) July 8, 2025 at 11:09 PM, Janos R. MX SL : @배광근 (Ben) July 8, 2025 at 11:12 PM, 장영환(Younghwan Chang) : @주범진 PM님 음극 1라인 자재가 없다는데 확인 좀 부탁드립니다 July 8, 2025 at 11:12 PM, Oláh András : Nem lehet hogy megint valami más cikkszámra kerültek az anyagok? July 8, 2025 at 11:12 PM, 배광근 (Ben) : What materials do you need July 8, 2025 at 11:12 PM, 장영환(Younghwan Chang) : ask @주범진 July 8, 2025 at 11:14 PM, Horváth Tamás : Anode M36H is missing July 8, 2025 at 11:17 PM, 주범진 : Im checking give me a minutes July 8, 2025 at 11:18 PM, Janos R. MX SL : írd be légyszi a material kódot July 8, 2025 at 11:19 PM, Hári Zoltàn : Pillanat és írjuk July 8, 2025 at 11:23 PM, Horváth Tamás : 112-00237A July 8, 2025 at 11:25 PM, 배광근 (Ben) : I released 220plts of 112-00237A in automated warehouse July 8, 2025 at 11:26 PM, Mohammad Amir : Dear @All, Update :- As now materials for E1PLA011/21_P01 is available jobs have been created for both machines successfully ✅. Currently available materials 218. Thank you very much! July 8, 2025 at 11:28 PM, Horváth Tamás : Thank you. July 8, 2025 at 11:28 PM, Mohammad Amir : You are welcome! July 8, 2025 at 11:28 PM, Hári Zoltàn : Cheers! :) July 8, 2025 at 11:28 PM, Mohammad Amir : Cheers :) July 8, 2025 at 11:29 PM, Horváth Tamás : Problem solved. July 8, 2025 at 11:30 PM, Janos R. MX SL : Thanks for everyone, espescialy for @주범진 July 8, 2025 at 11:42 PM, Horváth Tamás : Anód raktár elött megállt a robot. Nem veszi le a palletát July 8, 2025 at 11:44 PM, Szabadi Miki : Megyünk July 8, 2025 at 11:45 PM, Horváth Tamás : Köszönöm July 8, 2025 at 11:57 PM, Szabadi Miki : Valaki megcsinálta jöttünk egy potya kört 🤔 majd szoljatok legközelebb köszi 🙂 July 9, 2025 at 12:38 AM July 9, 2025 at 12:38 AM, Horváth Tamás : Sziasztok Katód 1 nél megállt a robot. Nézzetek rá✌️ July 9, 2025 at 12:38 AM, Oláh András : Csekkolom July 9, 2025 at 12:40 AM, Oláh András : Megvárom míg kiáll hibára és távgyógyítás lesz July 9, 2025 at 12:41 AM, Horváth Tamás : Okés July 9, 2025 at 12:42 AM, Oláh András : Már megyen is👍🏻 July 9, 2025 at 12:43 AM, Horváth Tamás : Szuper. Látom💪✌️ July 9, 2025 at 12:54 AM, Horváth Tamás : Anód oldalra is rá tudsz nézni?🙂 July 9, 2025 at 12:54 AM, Oláh András : Már bontom is a tarottkártyákat July 9, 2025 at 12:55 AM, Horváth Tamás : Meg a katód oldalra is egy paklival✌️ July 9, 2025 at 12:55 AM, Oláh András : Azt látom hogy anodon minden rendben van July 9, 2025 at 12:55 AM, Oláh András : Katod oldalon pedig a türelem meghozza gyümölcsét July 9, 2025 at 12:56 AM, Horváth Tamás : Ámen July 9, 2025 at 1:00 AM, Oláh András : Most már katod is rendben működik July 9, 2025 at 1:22 AM, Powder tréner : Hello,poron Anod oldalon megált az AGV.Nézétek rá.Köszönöm. July 9, 2025 at 1:22 AM, Oláh András : Nézem July 9, 2025 at 1:25 AM, Oláh András : @Powder tréner meg tudnád nézni a raklap csomagoló anyaga nem lóg le a raklak alá? July 9, 2025 at 1:25 AM, Oláh András : Raklap* July 9, 2025 at 1:26 AM, Powder tréner : Egy pillanat. July 9, 2025 at 1:30 AM, Powder tréner : Nem lóg be semmi July 9, 2025 at 1:30 AM, Oláh András : Mennek le ellenőrzik a masinát July 9, 2025 at 2:19 AM, Horváth Tamás : Katód raktárba a poron a két robot zavarja egymást... elég tanácstalanul mozog jobbra balra szegénykém😅 July 9, 2025 at 2:25 AM, Szabadi Miki : Na megoldódott a gordiuszi csomó😀 July 9, 2025 at 2:25 AM, Horváth Tamás : Volt baj nem kevés😅 July 9, 2025 at 2:26 AM, Szabadi Miki : Ez nem a hely ahol sok jo agv kis helyen is elférne 😅 July 9, 2025 at 2:48 AM, Horváth Tamás : Katód oldalra poron kellene egy kis segítség. Áll a plav közepén a robot July 9, 2025 at 2:49 AM, Szabadi Miki : Már nézzük is July 9, 2025 at 2:50 AM, Horváth Tamás : Mi is😄 July 9, 2025 at 3:16 AM, Horváth Tamás : Katód 2re kellene egy indítás. Áll a technika July 9, 2025 at 3:20 AM, Szabadi Miki : Már robog is July 9, 2025 at 6:22 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.09. 8+1/12+1 Tech, 0Sl, 1Sup. Overtime(0): Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(1): Pintye Miklós Shift Change(0): --------------- Electrode(3): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, --------------- Assy GF (2): Kovács Ágnes, CsanálosiGábor, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Takács Ádám --------------- Form/Modul(1): Gerbovits Ke July 9, 2025 at 7:21 AM, Varga Tamás Powder : Sziasztok a poron Katod oldalt az 1es sornál az AGV megállt. Meg tudnátok nézni? Köszönöm July 9, 2025 at 7:31 AM, Rácz Dániel / FA : Sajnos távolról nem tudom resetelni July 9, 2025 at 7:34 AM, Kokhan Yurii : Szia. Akkor gyere ide és javítsd ki July 9, 2025 at 7:34 AM, Rácz Dániel / FA : Igenis, táváris. 🫡 July 9, 2025 at 7:43 AM, Kokhan Yurii : Jön valaki? July 9, 2025 at 7:58 AM, Shakir (MCS) : @Fa Please check E0STKC13, Hoist time over error. Thank you July 9, 2025 at 8:21 AM, Varga Tamás Powder : A poron katod 1es sornál ugyan ott megállt az AGV. Légyszives nézzétek meg, köszönöm July 9, 2025 at 8:24 AM, Czeilinger Krisztián : Megyek July 9, 2025 at 8:34 AM, Böröcz Tamás : Írtam facen megoldottam July 9, 2025 at 8:34 AM, Czeilinger Krisztián : ThX :.) July 9, 2025 at 8:45 AM, jung soonhak정순학 invited Jang WonBum/장원범/AGV. July 9, 2025 at 8:55 AM, Varga Tamás Powder : A poron már megint katod 1es sornál ugyan ott megállt az AGV. Légyszives nézzétek meg, köszönöm July 9, 2025 at 8:56 AM, Czeilinger Krisztián : Megyek. July 9, 2025 at 10:15 AM, Rácz Dániel / FA : Az AGV #1 et kivesszük a termelésből. July 9, 2025 at 10:18 AM, Kokhan Yurii : Akkor csak 2 AGV maradt a Cathodon? July 9, 2025 at 10:19 AM, Böröcz Tamás : Kettő de az működik July 9, 2025 at 10:19 AM, Böröcz Tamás : Ha minden jól megy July 9, 2025 at 10:21 AM, Kokhan Yurii : Kettő az kevés, 3 sor van betöltésre July 9, 2025 at 10:24 AM, Böröcz Tamás : Hát ha az jobb nektek hogy óránként megy egy fél órát mi meg nem járunk szünetre akkor bent hagyjuk July 9, 2025 at 10:24 AM, Böröcz Tamás : Csak féltelezem hogy ha kettő megy folyamatosan az olyan mint ha most 4 menne July 9, 2025 at 10:25 AM, Rácz Dániel / FA : Sajnos nagyon sokszor elveszíti a pozicióját és akadályozza a másik kettőt. Koreai támogatás jelezzük hogy vizsgáljak ki a hiba okát. July 9, 2025 at 10:26 AM, Böröcz Tamás : Szóljál az SHEnek hogy engedélyezze a telepítő cégeseknek hogy ne legyen olyan érzékeny a szenzor. July 9, 2025 at 10:26 AM, Böröcz Tamás : Mivel felelősséget vállalnak az emberek épségéért így nem biztos hogy engedélyezni fogják amúgy se.. July 9, 2025 at 10:46 AM, Szarka Adrián : Sziasztok. A koreai mesterek nem tudnak jönni megcsinalni ? July 9, 2025 at 10:46 AM, Szarka Adrián : @Rácz Dániel / FA @Szücs Géza FT-B July 9, 2025 at 10:47 AM, Böröcz Tamás : Szia July 9, 2025 at 10:47 AM, Böröcz Tamás : Nincs engedélyezve July 9, 2025 at 10:48 AM, Böröcz Tamás : De már volt róla szó July 9, 2025 at 10:49 AM, Rácz Dániel / FA : Már egy küldtem a hibát egy másik csoportba hamarosan reagálni fognak July 9, 2025 at 10:56 AM, Szarka Adrián : Köszönöm. July 9, 2025 at 11:01 AM, Böröcz Tamás : Folyamatosan figyeljük amikor van rá mód, ha megáll általában el tudjuk indítani, de az 1est kb soha... Azért is vettük ki. De a többi kezelhető. July 9, 2025 at 2:38 PM, Varga Tamás Powder : Poron catod oldalt a 2es AGV megállt az 1es sornál. Távolból nem fogjatok tudni ujraindítani mert a másik is ott áll az 1es sornál. Légyszives nézzétek meg. Köszönöm July 9, 2025 at 2:39 PM, Rácz Dániel / FA : Megyünk July 9, 2025 at 2:41 PM, Czeilinger Krisztián : Megyünk. July 9, 2025 at 3:48 PM, Böröcz Tamás : @Varga Tamás Powder help help plz July 9, 2025 at 3:56 PM, Varga Tamás Powder : Poron anod oldalt befele megállt az air showerben az AGV. Megnéznétek? Köszönöm July 9, 2025 at 3:59 PM, Rácz Dániel / FA : Mindjart megy a @Böröcz Tamás July 9, 2025 at 4:23 PM, Szarka Adrián : Sziasztok fent a poron ki állt az agv hibára 2 számú July 9, 2025 at 4:24 PM, Szarka Adrián : Kanyarodás közben July 9, 2025 at 4:24 PM, Rácz Dániel / FA : Itt az elektródán most random 2 AGV is eldobta magát July 9, 2025 at 4:26 PM, Szarka Adrián : Elindult. Köszi July 9, 2025 at 5:43 PM, Varga Tamás Powder : Poron katod oldalt megállt az AGV az air shower elött. Meg tudnátok nézni? Köszönöm. July 9, 2025 at 5:53 PM, Mr.Miti (미티) FA : Megyünk July 9, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Sarvajcz Ferenc Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— July 10, 2025 at 6:09 AM July 10, 2025 at 6:09 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.10. 9+0/12+1 Tech, 0Sl, 1Sup. Overtime(1): Harasztia Zoltán Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(0): Shift Change(0): --------------- Electrode(4): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, TakácsÁdám, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Pintye Miklós --------------- Form/Modul( July 10, 2025 at 7:23 AM, Varga Tamás Powder : Sziasztok a poron katod oldal 3as soron az AGV letette a palettát és kiált hibára. Légyszives nézzétek meg. Köszönöm July 10, 2025 at 7:24 AM, Csanálosi Gábor FA : Megyek, kb 10 perc July 10, 2025 at 8:04 AM, Csanálosi Gábor FA : Kész July 10, 2025 at 8:12 AM, Varga Tamás Powder : Catod oldalt az AGV rosszul fordult és az 1es és a 3as sor között megállt az AGV légyszives nézzétek meg. Köszönöm July 10, 2025 at 8:13 AM, Csanálosi Gábor FA : @Rácz Dániel / FA megpróbálod kioszkról? July 10, 2025 at 8:15 AM, Rácz Dániel / FA : Megy July 10, 2025 at 8:15 AM, Csanálosi Gábor FA : Köszönöm July 10, 2025 at 8:51 AM, Varga Tamás Powder : Ezzel nem tudtok mit kezdeni? Mert az elöbb löktem arrébb az AGV-t mert megint rossz fele fordult. Ha van időtök megnéznétek? Köszönöm July 10, 2025 at 8:55 AM, Kokhan Yurii : Sziasztok. Katod raktár minden 3AGV megállt. Nézzétek meg légyszíves. Köszönöm July 10, 2025 at 8:57 AM, Kokhan Yurii : már elindították July 10, 2025 at 9:08 AM, Rácz Dániel / FA : Véleményem szerint lehet hogy a padlón található szennyeződés miatt, vagy a nem megfelelően lerakott lemezek miatt fordulhat rosszul, illetve csúszik. Most figyelgettem távolról a mozgást amikor 2 db AGV van bent akkor mindig az egyik a forduló ponton várakozik addig amíg a másik el nem megy abból a zónából ami blokkolja. Ez miatt ott nehezebben tud elindulni az AGV szerintem. July 10, 2025 at 9:09 AM, Varga Tamás Powder : Poron catode oldal 1es sornál megállt az AGV légyszives nézzétek meg. Köszönöm July 10, 2025 at 9:23 AM, Rácz Dániel / FA : Jövünk July 10, 2025 at 9:40 AM, Rácz Dániel / FA : Itt vagyunk July 10, 2025 at 10:21 AM, Varga Tamás Powder : Ismételten az AGV kiált hibára az 1es sornál. Légyszives nézzétek meg. Köszönöm July 10, 2025 at 10:22 AM, Rácz Dániel / FA : Itt vagyunk az anód oldalon annyira csúszik a padló hogy nem tud felmenni az agv a trepnire July 10, 2025 at 10:29 AM, Böröcz Tamás : @Szarka Adrián fel kéne mosni a géppel 😅 July 10, 2025 at 10:30 AM, Szarka Adrián : Szia. Nem vagyok ma. Takarítógép nem működik sajnos. Szervizre vár. July 10, 2025 at 10:31 AM, Szarka Adrián : @Varga Tamás Powder @Kokhan Yurii akkor egy takarítást valahogy be kell iktatni amit napok óta mondok ( kevés kicsi általános takarítás ) én mondtam hogy baj lesz. July 10, 2025 at 10:31 AM, Böröcz Tamás : Jó pihenést 🫶 July 10, 2025 at 10:32 AM, Rácz Dániel / FA : Az 1es AGV sajnos egyetlen egy trepnin sem tud felmenni még oldalasan sem. Ahogy mozgatom olyan érzés mintha a kerekek ellennének kopva. Megpróbálom ki juttatni a termelésből valahogyan. July 10, 2025 at 10:33 AM, Kokhan Yurii : @Szarka Adrián Melyik sorban álljak meg, hogy a srácok elmehessenek takarítani? July 10, 2025 at 10:34 AM, Szarka Adrián : Majd hétfőn este beszélünk róla 😘😘😘 July 10, 2025 at 10:34 AM, Kokhan Yurii : Rendben July 10, 2025 at 10:35 AM, Rácz Dániel / FA : Az előre irányban lehet gond a kerekekkel, mert hátra fele még úgy ahogy de fel megy a trepnin. July 10, 2025 at 10:39 AM, Rácz Dániel / FA : @Csanálosi Gábor FA @Böröcz Tamás Ne haragudjatok nem érek vissza elektrodára váltani titeket. July 10, 2025 at 10:39 AM, Csanálosi Gábor FA : Gondoltuk/látjuk July 10, 2025 at 10:58 AM, Rácz Dániel / FA : @Varga Tamás Powder bent felejtettük a 2 db felmosót meg a cifet anód oldalon, bocs csak már bent kéne lennünk elektródán. July 10, 2025 at 11:08 AM, Böröcz Tamás : Otthon kéne lennünk July 10, 2025 at 11:09 AM, Böröcz Tamás : Siess itt a haverod az A34nél July 10, 2025 at 11:18 AM, Varga Tamás Powder : No problem 😉 July 10, 2025 at 11:20 AM, Rácz Dániel / FA : Akkor megint áll minden 🤣 July 10, 2025 at 11:36 AM, Kokhan Yurii : Katod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm July 10, 2025 at 11:40 AM, Csanálosi Gábor FA : Befejezzük a kaját és megyünk July 10, 2025 at 11:43 AM, Varga Tamás Powder : Katod 2es sor E1PLC021-P02 portot meg tudnátok nézni? Az előzö palettát rosszul tette le az AGV és most meg anyagot nem tudunk hivni, csak a fehér gomb világit. Mintha lenne anyag ott, a monitoron is azt mutatja, de közben nincs ott semmi. Reset se működik. Légyszives nézzétek meg. Köszönöm July 10, 2025 at 11:44 AM, duzzaman Md (MCS) : So , physically it's empty ? July 10, 2025 at 11:45 AM, Varga Tamás Powder : Yes July 10, 2025 at 11:49 AM, Varga Tamás Powder : Prizma nem sérült July 10, 2025 at 11:51 AM, duzzaman Md (MCS) : Please try now. July 10, 2025 at 11:53 AM, Varga Tamás Powder : not good now July 10, 2025 at 11:55 AM, duzzaman Md (MCS) : Should be good now. Thank you July 10, 2025 at 11:55 AM, Rácz Dániel / FA : CA 1 es AGV megy July 10, 2025 at 12:22 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) we cleaned the sensors on port E1PLC021_P02, and now its okay not seeing the carrier what isnt there. BUT! the carrier id still in the port descriptuon, could you check it pls? (PS111-250415177) July 10, 2025 at 12:31 PM, duzzaman Md (MCS) : Hi, for this port, it shows empty in mcs and there's an active job coming from E0STKC12 July 10, 2025 at 12:33 PM, Varga Tamás Powder : Poron katod raktárban az agv ferdén megállt. Légyszives nézzétek meg köszönöm July 10, 2025 at 12:33 PM, Csanálosi Gábor FA : Yes we did LR, but on acs page, if we click on the port, still there is the mentioned id. July 10, 2025 at 12:36 PM, duzzaman Md (MCS) : In mcs, thers no such carriers in E1PLC021_P02 Its empty. Also, it was mentioned that its physically empty. July 10, 2025 at 12:36 PM, Csanálosi Gábor FA : Thank you July 10, 2025 at 12:38 PM, Rácz Dániel / FA : Megy July 10, 2025 at 12:42 PM, Varga Tamás Powder : Megint megállt🤣🤣🤣🤣 July 10, 2025 at 12:43 PM, Varga Tamás Powder : Nem veszi le az anyagot a katod oldalt July 10, 2025 at 12:43 PM, Rácz Dániel / FA : Igen csak most a 2es July 10, 2025 at 12:44 PM, Rácz Dániel / FA : Leakarta venni az anyagot de úgy döntött elmegy töltőre July 10, 2025 at 12:44 PM, Rácz Dániel / FA : Nem tudta eldönteni melyik a fontosabb July 10, 2025 at 12:45 PM, Rácz Dániel / FA : Így inkább eldobta magát July 10, 2025 at 12:48 PM, Rácz Dániel / FA : Yurii annyira hajtja az AGV ket hogy nincs idejük tölteni és mind a 3 60% alatt van 😅 July 10, 2025 at 12:49 PM, Varga Tamás Powder : Tisztelettel jelentem anod raktárban is meg adta magát🤣🤣🤣 July 10, 2025 at 12:51 PM, Rácz Dániel / FA : A por elesett 🥹 July 10, 2025 at 12:55 PM, Rácz Dániel / FA : Mindent felteszek a porra 🤣 July 10, 2025 at 1:00 PM, duzzaman Md (MCS) : @FA Please could you check E0CNVC12 _P08 there is PIO Busy on time over error Thank you July 10, 2025 at 1:01 PM, Rácz Dániel / FA : Persze tudom, megyünk. Csak még bent vagyunk az elektróda press slitten. Lehet nem is ebédelek ma, ki tudja. 🤣 köszi az infót July 10, 2025 at 1:03 PM, Varga Tamás Powder : Tudnál ilyenkor kényelmesen enni hogy a por elesett?😅 July 10, 2025 at 1:03 PM, Rácz Dániel / FA : Nem mert gyomor görcsön van és inkább mozgok az segít. 🫡 July 10, 2025 at 1:05 PM, Varga Tamás Powder : Cuccolj ide fel 😊 mindig mondom úgyis jössz fel😉 July 10, 2025 at 1:09 PM, Rácz Dániel / FA : Megyek July 10, 2025 at 1:09 PM, Böröcz Tamás : An2 is be van parázva July 10, 2025 at 1:09 PM, Rácz Dániel / FA : Jaja eléggé durván July 10, 2025 at 1:36 PM, Varga Tamás Powder : Keresztbe áll megin a catode raktárban az AGV tudna valaki segíteni? Köszönöm July 10, 2025 at 1:39 PM, Csanálosi Gábor FA : Kész July 10, 2025 at 1:40 PM, Rácz Dániel / FA : Köszi, pont most kértem ki a kajámat ❤️ July 10, 2025 at 1:40 PM, Csanálosi Gábor FA : Jó étvágyat! July 10, 2025 at 1:41 PM, Rácz Dániel / FA : Szerintem a poron eszem meg 🥹 July 10, 2025 at 2:34 PM, Kokhan Yurii : A katod raktár AGV megállt July 10, 2025 at 2:34 PM, Kokhan Yurii : Nézzétek meg légyszíves July 10, 2025 at 2:34 PM, Kokhan Yurii : Köszönöm July 10, 2025 at 2:38 PM, Czeilinger Krisztián : @Kokhan Yurii A 3-as AGV már megy. July 10, 2025 at 2:40 PM, Czeilinger Krisztián : @Kokhan Yurii A 2-es AGV is megy. Anod oldalon. A 3-as is anod oldalon megy. July 10, 2025 at 2:43 PM, Kokhan Yurii : Most igen July 10, 2025 at 3:22 PM, Varga Tamás Powder : Poron catod oldalt megállt az AGV az air showerben . Mind a 2 ajtó nyitva. Légyszives nézzétek meg. Köszönöm July 10, 2025 at 3:33 PM, Czeilinger Krisztián : Megyünk minjá July 10, 2025 at 3:34 PM, Böröcz Tamás : Még mindig nyitva? July 10, 2025 at 3:44 PM, Varga Tamás Powder : Pillanat megnézem July 10, 2025 at 3:46 PM, Varga Tamás Powder : Nincs nyitva. Csak a 3as AGV áll itt July 10, 2025 at 4:02 PM, Böröcz Tamás : Sakk matt July 10, 2025 at 4:02 PM, Böröcz Tamás : Olyan retkes a padló hogy kifarol a kerék July 10, 2025 at 4:03 PM, Böröcz Tamás : Én nem fogom össze törni a légzuhany July 10, 2025 at 4:03 PM, Böröcz Tamás : @방혁 PM(Bang.Hyuk) FA July 10, 2025 at 4:05 PM, 방혁 PM(Bang.Hyuk) FA : What happened July 10, 2025 at 4:06 PM, Csanálosi Gábor FA : The floor is too dirty in the carhode side of the powder, so the agv wheels just spinning without move July 10, 2025 at 4:08 PM, Böröcz Tamás : I press forward and it's going right I press left and it's going right July 10, 2025 at 4:08 PM, 방혁 PM(Bang.Hyuk) FA : Omw July 10, 2025 at 4:12 PM, Böröcz Tamás : Nyugodtan neki lehet állni takarítani mert amíg ilyen retkes a föld az összes sor állni fog July 10, 2025 at 4:27 PM, Varga Tamás Powder : @duzzaman Md (MCS) hello. I would like to request 20 pallets of CDS 172( 111-00150A) cathode material thank you July 10, 2025 at 4:27 PM, Fülöp Csaba : Éjszakásban elkezdjük a takarítást, addig is kérem manulaban adjatok ki anyagot Nekünk. Egyébként nem csak a porbetöltésen probléma, hanem a coatingon és PS-en is, hogy az AGV-k kerekei folyamatosan szétviszik a koszt az útvonalukon… Köszönöm July 10, 2025 at 4:27 PM, Varga Tamás Powder : Segitséget szeretnék kérni a porra az anyagok levételéhez. Köszönöm July 10, 2025 at 4:28 PM, 방혁 PM(Bang.Hyuk) FA : @KIM SEYEON [김세연]_FA 분체 바닥에 전극가루로 인해 오염이 너무 심하여 AGV정상 기동하지 못합니다. 물체 충돌 및 사람하고 충돌할 가능성 또한 보입니다. 분체 바닥 청소 전까지 AGV가동 정지하겠습니다. July 10, 2025 at 4:28 PM, 방혁 PM(Bang.Hyuk) FA : @KIM SEYEON [김세연]_FA @이주봉PM LEE JUBONG(FA) 긴급 July 10, 2025 at 4:31 PM, duzzaman Md (MCS) : To the 1st floor, right ? July 10, 2025 at 4:33 PM, KIM SEYEON [김세연]_FA : @장영환(Younghwan Chang) 피엠님 분체 양극 에어샤워 근처에서 같이 봐주실 전극 분들이 계실까요? July 10, 2025 at 4:34 PM, Varga Tamás Powder : Yes July 10, 2025 at 4:35 PM, Varga Tamás Powder : Valaki tud jönni? July 10, 2025 at 4:35 PM, 임종현(JongHyun Lim) : 올라가보겠습니다 July 10, 2025 at 4:39 PM, 서한결 Seo Han : 지금 갈게요 July 10, 2025 at 4:39 PM, Böröcz Tamás : Igen addig kezdjen el kipakolni July 10, 2025 at 4:43 PM, Böröcz Tamás : Ha van mit akkor viszik July 10, 2025 at 4:45 PM, 서한결 Seo Han : 어디계세요? July 10, 2025 at 4:46 PM, duzzaman Md (MCS) : All materials sent. Thank you July 10, 2025 at 4:46 PM, 방혁 PM(Bang.Hyuk) FA : 분체 양극1F 창고 앞에서 작업중입니다 July 10, 2025 at 4:50 PM, Fülöp Csaba : Night shift starts cleaning! I'd like to discuss this tomorrow. Thanks July 10, 2025 at 4:58 PM, Böröcz Tamás : Itt vagyok de amíg az AGV a légzuhanyban van addig nem sok értelme van leszedni July 10, 2025 at 5:19 PM, 방혁 PM(Bang.Hyuk) FA : @KIM SEYEON [김세연]_FA 18시 부터 분체 양극 AGV 재투입 하겠습니다 July 10, 2025 at 5:19 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. July 10, 2025 at 6:42 PM, Mr.Miti (미티) FA : Jó estét! Poros SL vagy Trainer jelen van ? July 10, 2025 at 6:53 PM, Powder tréner : Itt vagyok. July 10, 2025 at 6:53 PM, Mr.Miti (미티) FA : Már beszéltünk July 11, 2025 at 7:36 AM July 11, 2025 at 7:36 AM, Shakir (MCS) : @Fa Please check E0STKC13, Hoist time over error. Thank you July 11, 2025 at 7:36 AM, Simon Attila F. A. : I check. July 11, 2025 at 7:36 AM, Shakir (MCS) : Good morning Thank you July 11, 2025 at 7:37 AM, Simon Attila F. A. : Good morning! Solved. July 11, 2025 at 10:18 AM, Zagyva Tamás : Sziasztok Poron az airshower előtt a területen megállt az AGV.Meg tudnátok nézni? July 11, 2025 at 10:18 AM, Zagyva Tamás : Katód oldalon July 11, 2025 at 10:18 AM, Farkas Tamàs : Szia. Igen July 11, 2025 at 10:49 AM, 서한결 Seo Han : 분체실 청소가 어느정도 진행되었는데 어제 말씀드렸듯 agv 바퀴가 더러워서 깨끗한 바닥에 agv바퀴자국만 심하게 그려지고있는 상태입니다. 현장 관리 계속 진행할텐데 병행해서 agv바퀴 청소 방법도 고안해서 진행 부탁드릴 수 있을까요? July 11, 2025 at 10:51 AM, 서한결 Seo Han : @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA July 11, 2025 at 5:57 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon meg állt az automata raktár! Alkalomadtán nézzétek meg légyszíves! Mi már nem vagyunk bent de reggel szükség lesz rá. Köszönöm July 11, 2025 at 5:58 PM, Dániel Hufnágel : Egy pillanat és érkezünk July 11, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0):- Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 11, 2025 at 6:54 PM, Horváth Tamás : Jó estét. Sziasztok Katódon a raktárba megállt a robot a poron, nem veszi le a raklapot. July 11, 2025 at 6:55 PM, Oláh András : Szia hamar kezdik July 11, 2025 at 6:56 PM, Oláh András : Acs szerint a másik 2 agv stale-be van July 11, 2025 at 6:56 PM, Oláh András : Megyünk fel July 11, 2025 at 7:04 PM, Horváth Tamás : Ok July 11, 2025 at 8:10 PM, Horváth Tamás : Katódon kellene egy táv gyógyítás a poron July 11, 2025 at 8:10 PM, Szabadi Miki : Nézzük July 11, 2025 at 9:45 PM, Horváth Tamás : Anódra kérnék egy táv gógyítást a porra ha lehetséges July 11, 2025 at 9:46 PM, Horváth Tamás : *gyógyítást✌️ July 11, 2025 at 9:51 PM, Oláh András : Nem működik a távgyógyítás, úgyhogy megjósolom hogy nemsokára ott leszünk July 11, 2025 at 9:52 PM, Oláh András : 5000 péz lesz July 11, 2025 at 9:53 PM, Horváth Tamás : Köszönöm✌️🙂 July 12, 2025 at 12:06 AM July 12, 2025 at 12:06 AM, Oláh András : Ki trükközik anodon az agv-vel? July 12, 2025 at 12:07 AM, Horváth Tamás : Nem tudom... July 12, 2025 at 12:08 AM, Horváth Tamás : Most szóltak hogy megállt July 12, 2025 at 12:08 AM, Oláh András : Az előbb fork bumper hibával megállt, azóta újra el van indítva, igaz így is áll July 12, 2025 at 12:48 AM, Horváth Tamás : Sziasztok. Katód oldalon az 1es itt vergődik a raktár elött a placcon. July 12, 2025 at 12:49 AM, Oláh András : Mindjárt rálesek July 12, 2025 at 1:29 AM, Oláh András : @Horváth Tamás tudsz hivni utilityt a katodos air showerhez? 5-10mp-enként kinyílik ez tuti nem lesz jó az agvknek July 12, 2025 at 1:33 AM, Oláh András : Mondjuk most abbahagyta July 12, 2025 at 3:10 PM, Zagyva Tamás : Poron a katód 1-nél megállt az AGV.Sikerült újraindítanom. July 12, 2025 at 3:11 PM, Farkas Tamàs : Köszi July 12, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (0): - Holiday (1): Kovács Szabolcs Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(4): GF: Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 12, 2025 at 6:40 PM, Oláh András : @Mohammad Amir please reset my mcs password. Id: SGAD028 Thank you 🙏 July 12, 2025 at 6:40 PM, Mohammad Amir : Good evening, Sure checking! July 12, 2025 at 6:42 PM, Mohammad Amir : Issue has been resolved ✅. You may login with the same old password. Feel free to contact me again if you need any further assistance. Thank you very much! July 12, 2025 at 6:42 PM, Oláh András : Thank you very much 🙏 July 12, 2025 at 6:42 PM, Mohammad Amir : You are most welcome! July 12, 2025 at 7:34 PM, Varga Zoltán : Sziasztok #1 AGV megállt katód #1-nél nézzétek meg légyszi köszönöm July 12, 2025 at 7:36 PM, Szabadi Miki : Nézzük July 12, 2025 at 10:25 PM, Varga Zoltán : Sziasztok AGV rosszul rakta le a palettát katód #2-nél és állandóan megáll elindul nézzétek meg légyszi köszönöm July 12, 2025 at 10:28 PM, Oláh András : Mindjárt nézzük July 12, 2025 at 10:56 PM, Varga Zoltán : Azóta ott áll #3 July 12, 2025 at 10:57 PM, Oláh András : Láttuk és megyünk már July 13, 2025 at 12:16 AM July 13, 2025 at 12:16 AM, Varga Zoltán : Anód raktár előtt megállt AGV nem veszi ki az anyagot nézzétek meg légyszi köszönöm July 13, 2025 at 12:16 AM, Kiss Balázs F.A. : Látjuk, lassan úton July 13, 2025 at 12:24 AM, Varga Zoltán : Katódon is ugyanaz July 13, 2025 at 12:28 AM, Kiss Balázs F.A. : Oksa July 13, 2025 at 12:28 AM, Kiss Balázs F.A. : Úton July 13, 2025 at 3:35 AM, Varga Zoltán : Katódon elakadt AGV #1 olyan mintha elkaparna csak de nem megy nézzétek meg légyszi köszönöm July 13, 2025 at 3:35 AM, Oláh András : Nézzük July 13, 2025 at 3:45 AM, Szabadi Miki : Megyünk fel July 13, 2025 at 7:28 AM, Powder tréner : Hali a por katod raktárnál az egyik robot megállt nézzétek meg légyszíves. Köszönöm. July 13, 2025 at 7:32 AM, Viczai Tamás : Nézzük July 13, 2025 at 6:00 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0): - Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kasztel Balázs, Kovács Szabika Modul(2): Nagy Gábor, Martina Dávid July 13, 2025 at 9:07 PM, Varga Zoltán : Sziasztok poron katód air showernél megállt AGV #1 nézzétek meg légyszi July 13, 2025 at 9:08 PM, Dániel Hufnágel : CS es koreai kollega nincsen ott véletlenül? July 13, 2025 at 9:10 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 확인 가능할까요? July 13, 2025 at 9:11 PM, Varga Zoltán : Próbálja megoldani July 13, 2025 at 9:14 PM, Varga Zoltán : Nem sikerült megcsinálni July 13, 2025 at 9:16 PM, Varga Zoltán : Valaki jöjjön légyszi July 13, 2025 at 9:26 PM, Oláh András : Megyünk July 14, 2025 at 12:21 AM July 14, 2025 at 12:21 AM, Horváth Tamás : Sziasztok por katod oldalra kellene segitseg.. nem veszi le a raklapot July 14, 2025 at 12:22 AM, Oláh András : Megyünk megnézzük July 14, 2025 at 4:05 AM, Varga Zoltán : Helló katód oldalon megállt AGV nézzétek meg légyszi köszönöm July 14, 2025 at 4:08 AM, Szabadi Miki : Nézzük July 14, 2025 at 4:08 AM, Dániel Hufnágel : Már megy July 14, 2025 at 6:35 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 14, 2025 at 7:34 AM, Shakir (MCS) : @Fa Please check E0STKC12, Hoist time over error. Thank you July 14, 2025 at 7:36 AM, adambenczik : Solved July 14, 2025 at 7:16 PM, Rácz Dániel / FA : This message was deleted. July 14, 2025 at 9:44 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt 1es sornál megállt az AGV légyszives nézzétek meg. Köszönöm July 14, 2025 at 9:50 PM, Szarka Adrián : Sziasztok katod oldalon az 1 számú agv ki állt hibára de még a fel jelölt út vonalról is lentebb ment. Ahol van a padló jelölő kb 5 cm odébb áll az agv July 14, 2025 at 9:51 PM, Kokhan Yurii : Sziasztok. A Poron területén katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 14, 2025 at 9:53 PM, Szarka Adrián : Valaki tud jönni ? July 14, 2025 at 9:53 PM, Kokhan Yurii : Tud valaki jönni? July 14, 2025 at 9:54 PM, Rácz Dániel / FA : Cigizek és megyek fel July 14, 2025 at 9:54 PM, Szarka Adrián : Köszi 😘😘😘😘 July 14, 2025 at 9:54 PM, Kokhan Yurii : Köszönöm July 14, 2025 at 9:54 PM, Szarka Adrián : Túl közel csúszott a falhoz szerintem. És a szenzor miatt áll érzékeli hogy közel van a fal July 14, 2025 at 10:00 PM, Böröcz Tamás : Elvileg mindegyik megy July 14, 2025 at 10:03 PM, Szarka Adrián : Akkor lehet valaki elindította. Én most jöttem le a porrol így nem tudom megnézni @Varga Tamás Powder jó ? July 14, 2025 at 10:04 PM, Szarka Adrián : Köszönöm July 14, 2025 at 10:04 PM, Varga Tamás Powder : Igen már megy ☺️ July 14, 2025 at 10:10 PM, Rácz Dániel / FA : @Böröcz Tamás köszönöm szépen akkor nem megyek fel July 14, 2025 at 10:56 PM, Varga Tamás Powder : Poron katod oldalt az 1es sornál megállt az AGV. légyszives nézzétek meg. Köszönöm July 15, 2025 at 2:05 AM July 15, 2025 at 2:05 AM, MCS/RTD System : @Fa Please check E0STKC13, Crane 01, Hoist time over error. Thank you very much! July 15, 2025 at 3:09 AM, Varga Tamás Powder : Poron katod oldalt az 1es sornál megállt az AGV. légyszives nézzétek meg. Köszönöm July 15, 2025 at 3:12 AM, Czeilinger Krisztián : Megyek July 15, 2025 at 3:34 AM, Kokhan Yurii : Köszönöm July 15, 2025 at 3:35 AM, Czeilinger Krisztián : Szívesen ;) July 15, 2025 at 4:09 AM, Varga Tamás Powder : This message was deleted. July 15, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 15, 2025 at 8:37 AM, MCS/RTD System : @FA Please check E0STKC11_C01 MCP AP error. Thank you July 15, 2025 at 8:39 AM, Viczai Tamás : Done July 15, 2025 at 6:58 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a 2es sornál megállt az AGV. Légyszives nézzétek meg. Köszönöm July 15, 2025 at 7:04 PM, Varga Tamás Powder : Megállt megint. Nem tette le a palettát July 15, 2025 at 7:07 PM, Csanálosi Gábor FA : @Rácz Dániel / FA a dohányzóban vagyok, felmegyek. @Szabadi Miki te meg váltsd majd a srácokat, aztán érkezem. July 15, 2025 at 7:08 PM, Rácz Dániel / FA : Már csináljuk távolról, de valami az ACS el van July 15, 2025 at 7:09 PM, Rácz Dániel / FA : Navitrol jól működik July 15, 2025 at 7:11 PM, Rácz Dániel / FA : Megy már July 15, 2025 at 7:15 PM, Csanálosi Gábor FA : Pont mire ideértem. 😅 July 15, 2025 at 7:15 PM, Csanálosi Gábor FA : Megyek vissza July 15, 2025 at 7:15 PM, Rácz Dániel / FA : Nem szabad kapkodni July 15, 2025 at 7:16 PM, Csanálosi Gábor FA : Megvárom míg lerakja July 15, 2025 at 7:17 PM, Csanálosi Gábor FA : Pipa July 15, 2025 at 7:17 PM, Rácz Dániel / FA : Amelyikkel gond volt az most megy ki az ajtón. Olyan mintha az ACS késne nem frissülne megfelelően. July 15, 2025 at 7:41 PM, Csanálosi Gábor FA : Cathode 3-as agv bent megmakacsolta magát July 15, 2025 at 7:42 PM, Csanálosi Gábor FA : Oda pakolna ahol még palettát mutat July 15, 2025 at 7:47 PM, Csanálosi Gábor FA : Megoldva July 15, 2025 at 8:03 PM, Varga Tamás Powder : Sziasztok. A poron anod oldalt a 2es sornál megállt az AGV. Légyszives nézzétek meg. Köszönöm July 15, 2025 at 8:06 PM, Rácz Dániel / FA : Megyünk csak egy cigi July 15, 2025 at 8:11 PM, Varga Tamás Powder : Sziasztok. A poron katod oldalt a raktárban megállt az AGV. Légyszives nézzétek meg. Köszönöm July 15, 2025 at 8:12 PM, Rácz Dániel / FA : Itt vagyok nyomom @Yurii July 15, 2025 at 8:46 PM, Varga Tamás Powder : A poron katod oldalt a 1es sor mögött megállt az AGV. Légyszives nézzétek meg. Köszönöm July 15, 2025 at 8:56 PM, Varga Tamás Powder : A poron katod oldalt a 1es sornál megállt az AGV. Légyszives nézzétek meg. Köszönöm July 15, 2025 at 9:06 PM, Kokhan Yurii : Tud valaki jönni? July 15, 2025 at 9:08 PM, Rácz Dániel / FA : Már megy July 15, 2025 at 9:09 PM, Kokhan Yurii : Köszönöm July 15, 2025 at 9:15 PM, Rácz Dániel / FA : @Varga Tamás Powder 1es sor nem tudja letenni az AgV mert van már paletta July 15, 2025 at 9:16 PM, Varga Tamás Powder : Igen látom pont itt vagyok. Pillanat és elvesszük July 15, 2025 at 9:18 PM, Rácz Dániel / FA : Köszi @Yurii July 15, 2025 at 9:19 PM, Varga Tamás Powder : Kivettük a palettát July 15, 2025 at 9:21 PM, Rácz Dániel / FA : Köszi July 15, 2025 at 9:58 PM, Varga Tamás Powder : Poron katod oldalt a 2es soron a E1PLC021-P01 porton a prizma eltört. Ki tudnátok cserélni? Köszönöm July 15, 2025 at 10:07 PM, Rácz Dániel / FA : A múltkor 2 db ot betettem az FA-s közös fenti szekrénybe July 15, 2025 at 10:16 PM, Csanálosi Gábor FA : Megyünk a Mikivel July 15, 2025 at 10:40 PM, Csanálosi Gábor FA : Kész July 15, 2025 at 10:43 PM, Kokhan Yurii : Köszönöm July 15, 2025 at 10:48 PM, Rácz Dániel / FA : 1F Ca Powder nem állt meg a 2es AGV csak blokkolva van July 16, 2025 at 1:29 AM July 16, 2025 at 1:29 AM, Kokhan Yurii : Sziasztok Anod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 16, 2025 at 1:32 AM, Rácz Dániel / FA : Ott van egy paletta help help July 16, 2025 at 1:43 AM, Kokhan Yurii : Kivettük a palettát July 16, 2025 at 1:45 AM, Csanálosi Gábor FA : @Rácz Dániel / FA no scan from front scanner, meg kell takarítani valszeg. :( July 16, 2025 at 1:55 AM, Rácz Dániel / FA : Megyünk July 16, 2025 at 2:53 AM, Varga Tamás Powder : Poron katod oldalt a raktárban megállt az AGV. Légyszives nézzétek meg. Köszönöm July 16, 2025 at 2:56 AM, Szabadi Miki : Már megy is July 16, 2025 at 2:58 AM, Varga Tamás Powder : Megállt megint 😊 nem veszi le az anyagot July 16, 2025 at 2:59 AM, Szabadi Miki : Igen látjuk az már egy másik , nemsoká megyünk July 16, 2025 at 3:00 AM, Rácz Dániel / FA : Most megyek be ha gondoljátok induljatok el ki July 16, 2025 at 3:02 AM, Kokhan Yurii : a AGV az anód oldalon is megállt July 16, 2025 at 3:26 AM, Varga Tamás Powder : Poron a katod oldalt az 1es sor mögött az AGV megállt. Légyszeives nézzétek meg. Köszönöm July 16, 2025 at 3:29 AM, MCS/RTD System : @FA Please check Cathode powder STK C12 Load collapse error. July 16, 2025 at 3:54 AM, Varga Tamás Powder : Poron a katod oldalt az 1es sor mögött az AGV megállt. Majdnem neki ment a J/C-nek Légyszeives nézzétek meg. Köszönöm July 16, 2025 at 3:55 AM, Csanálosi Gábor FA : Nemsokára megyek July 16, 2025 at 4:18 AM, Csanálosi Gábor FA : Kész July 16, 2025 at 4:19 AM, Kokhan Yurii : Köszönöm July 16, 2025 at 5:31 AM, Szarka Adrián : Sziasztok anod oldalon meg állt az agv kerlek nézzetek meg köszönöm July 16, 2025 at 5:32 AM, Szabadi Miki : Airshower miatt áll July 16, 2025 at 5:32 AM, Szarka Adrián : Már kész July 16, 2025 at 5:32 AM, Szabadi Miki : Okés akkor már indul is az agv July 16, 2025 at 5:33 AM, Kokhan Yurii : Köszönöm szépen. Jó pihenés July 16, 2025 at 5:35 AM, Szarka Adrián : Köszönöm 😘😘😘😘 July 16, 2025 at 6:10 AM, Baek Hojong(백호종)FA : 2025.07.16 / Day Shift (06:00~18:00)] Baek HOJONG 백호종PM • Assy: 김정희, 최명운, 윤정은 • 몽골 1F - Dariimaa (All) GF - Zulaa (ST AN) - Ganaa (ST CA) - Uyanga (VD) - Khaliun (NC) • 방글라데시 - Atik / Ivancsa FA - Nauman/Ivancsa FA • 헝가리 - kovács László 5/ Iváncsa FA July 16, 2025 at 8:06 AM, MCS/RTD System : Good morning @FA, Please check STK011-C01 there is Load collapse error. Thank you very much! July 16, 2025 at 8:44 AM, MCS/RTD System : @Marsi Gábor Please chcek again,there is now hoist RLS error. Thank you very much July 16, 2025 at 8:55 AM, Marsi Gábor : Done July 16, 2025 at 9:35 AM, Zagyva Tamás : Jó napot Poron anód raktárba az egyik AGV lemerült.Nem ment önként töltőre most meg útba van.Megnézitek? July 16, 2025 at 9:36 AM, Marsi Gábor : Megyek July 16, 2025 at 10:55 AM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon meg állt az automata raktár! Segítséget kérek! July 16, 2025 at 10:55 AM, Marsi Gábor : Nemsokára érkezünk July 16, 2025 at 10:57 AM, Molnár Ferenc : Köszönöm July 16, 2025 at 11:09 AM, Kertész Dániel : Kész July 16, 2025 at 11:15 AM, Molnár Ferenc : Köszönöm szépen July 16, 2025 at 2:07 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon az 1-es daru pirosban van. Hibát nem ír nekünk. Nézzétek meg légyszíves! Köszönöm July 16, 2025 at 2:08 PM, Marsi Gábor : Érkezünk hamarosan July 16, 2025 at 2:08 PM, Molnár Ferenc : Illetve a kioszkon 146. Ready off during forking July 16, 2025 at 2:21 PM, Marsi Gábor : Kész July 16, 2025 at 2:30 PM, Molnár Ferenc : Köszönöm July 16, 2025 at 2:59 PM, Powder tréner : Hello a pora szeretnék segítséget kérni az egyik AGV megált az Anod Air Showerben July 16, 2025 at 2:59 PM, Molnár Ferenc : Hello! Meg állt ugyanúgy a daru. Por raktár földszinten anód oldalon. Segítséget kérek! Köszönöm July 16, 2025 at 3:00 PM, Marsi Gábor : Megyek July 16, 2025 at 3:00 PM, Marsi Gábor : Oda is July 16, 2025 at 3:16 PM, Marsi Gábor : Kész July 16, 2025 at 7:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12+1 Overtime (1):Denkó János Sick (0): - Holiday (2): Kasztel Balázs, Kiss Balázs Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kovács Szabika Modul(2): Denkó János, Martina Dávid July 16, 2025 at 9:37 PM, Varga Zoltán : Sziasztok E1PLC021_P02 portra nem jön alapanyag. A fehér lámpa villog de a raktárból nem jön semmi. Meg tudjátok nézni légyszi? Köszönöm July 16, 2025 at 9:40 PM, Shakir (MCS) : Job exists for this port but currently STKC13 is OOS. @FA Please check STKC13: Hoist time over error. Thank you July 16, 2025 at 9:43 PM, MCS/RTD System : @Szabadi Miki please check July 16, 2025 at 9:43 PM, Szabadi Miki : Cheking July 16, 2025 at 10:29 PM, Horváth Tamás : Sziasztok.. Katód oldalt a poron megállt a robot July 16, 2025 at 10:29 PM, Oláh András : Szia nézzük July 16, 2025 at 11:04 PM, Powder tréner : Sziasztok.. Katód oldalt a poron megállt a robot July 16, 2025 at 11:05 PM, Dániel Hufnágel : Már megy July 16, 2025 at 11:15 PM, Horváth Tamás : Katódon megállt a robot bent a területen July 16, 2025 at 11:24 PM, Horváth Tamás : Poron July 16, 2025 at 11:24 PM, Oláh András : Toltsetek be a port az 1es portról July 16, 2025 at 11:25 PM, Horváth Tamás : Ok July 16, 2025 at 11:32 PM, Varga Zoltán : Elhúztam onnan July 16, 2025 at 11:53 PM, Varga Zoltán : Katódon megállt a robot bent a területen July 17, 2025 at 1:20 AM July 17, 2025 at 1:20 AM, Varga Zoltán : Katódon megállt a robot bent a területen nézzétek meg légyszi July 17, 2025 at 1:22 AM, Szabadi Miki : És már megy is tovább July 17, 2025 at 4:00 AM, Hári Zoltàn : Poron a katod raktarban megallt egy robot. Nezzetek ra legyszi! Koszi! July 17, 2025 at 4:02 AM, Szabadi Miki : Már mennek is July 17, 2025 at 4:20 AM, Varga Zoltán : előző alkalommal rosszul rakta le az anyagot az AGV az E1PLC021_P02 portra és valószínűleg elmozdulhatott a szenzor mert azóta nem müködik az anyaghívó. Megnéznétek légyszi July 17, 2025 at 4:30 AM, Horváth Tamás : Katód airshowerbe megállt a robot a poron July 17, 2025 at 4:30 AM, Oláh András : Megyek lassan July 17, 2025 at 6:46 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (0): - Holiday (2): Kiss Balázs, Nagy Gábor Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Kasztel Balázs, Novák Zoltán, Kovács Szabika Modul(2): Zsurbej Zsolt, Martina Dávid July 17, 2025 at 8:57 PM, Horváth Tamás : Sziasztok katód oldalt áll a robot a poron a raktárba. July 17, 2025 at 9:03 PM, Horváth Tamás : Már kettő is. July 17, 2025 at 9:07 PM, Horváth Tamás : Tudtok segíteni? July 17, 2025 at 9:08 PM, Dániel Hufnágel : Bocsánat, egy pillanat és ránézünk July 17, 2025 at 9:08 PM, Horváth Tamás : Köszi July 17, 2025 at 9:12 PM, Szabadi Miki : Megyünk July 17, 2025 at 10:46 PM, Varga Zoltán : Katód raktárnál megállt AGV nézzétek meg légyszi köszönöm July 17, 2025 at 10:53 PM, Varga Zoltán : Megint megállt July 17, 2025 at 10:55 PM, Varga Zoltán : Szuper köszi July 17, 2025 at 10:56 PM, Oláh András : Rajta vagyok 👍🏻 July 17, 2025 at 11:05 PM, Oláh András : Elvileg megy minden 😁 annyi csavart beleraktam hogy ami a 2es sor 2es portjára ment volna az 1es portra megy July 18, 2025 at 6:34 AM July 18, 2025 at 6:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Csepi Árpád ———————————— July 18, 2025 at 1:34 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten anód oldalon meg állt a kettes daru. Segítséget kérek July 18, 2025 at 1:34 PM, Mr.Miti (미티) FA : Érkezem July 18, 2025 at 1:34 PM, Molnár Ferenc : Hoist Time Over During Forking Error July 18, 2025 at 1:34 PM, Molnár Ferenc : Köszönöm July 18, 2025 at 1:48 PM, Mr.Miti (미티) FA : Megoldva. Ra kellene indítani a konvejorra. Lennétek kedvesek megnyomni hosszan a zöld gombot? July 18, 2025 at 1:48 PM, Mr.Miti (미티) FA : Köszönöm July 18, 2025 at 1:53 PM, Molnár Ferenc : Szia! Nem indult el. July 18, 2025 at 1:58 PM, MCS/RTD System : @FA Please chcek STKA12_C01 there is SCP safety relay power trip error. Thank you! July 18, 2025 at 2:59 PM, Molnár Ferenc : Sziasztok! Por raktár földszinten katód oldalon nem ment át az alapanyag RTV-re. Data Miss Match Alarm July 18, 2025 at 2:59 PM, Molnár Ferenc : Segítséget kérek July 18, 2025 at 3:31 PM, 배광근 (Ben) : @FA 안녕하십니까. 지금 양극분체창고 자재가 멈춰서 안들어가고 있는데 도움주실 수 있으실까요?? July 18, 2025 at 3:40 PM, 배병민 (Bae Byoungmin) : @Mr.Miti (미티) FA E0CNVC11_RTV01 Stopped due to data mismatch error. Please check. July 18, 2025 at 3:42 PM, Mr.Miti (미티) FA : Checking July 18, 2025 at 3:42 PM, Mr.Miti (미티) FA : Technicans on the way July 18, 2025 at 3:43 PM, cehmannzsoltcehmann : Kész van July 18, 2025 at 3:44 PM, Mr.Miti (미티) FA : Solved July 18, 2025 at 3:44 PM, Molnár Ferenc : Köszönöm July 18, 2025 at 3:49 PM, 배병민 (Bae Byoungmin) : Thank you July 18, 2025 at 6:04 PM, Kokhan Yurii : Sziasztok. A katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 18, 2025 at 6:04 PM, Czeilinger Krisztián : Megyek. July 18, 2025 at 6:21 PM, Csanálosi Gábor FA : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.18. 11 Tech,+1 overtime 0SL Overtime(1): Szabadi Miklós Holiday(2): Szücs Géza Imre, Takács Ádám Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (2): Böröczki Balázs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert, --------------- Form/Modul(3): Boromisza Zolt July 18, 2025 at 6:28 PM, Czeilinger Krisztián : Használatra kész July 18, 2025 at 6:28 PM, Czeilinger Krisztián : Kész. July 18, 2025 at 10:33 PM, Kokhan Yurii : Sziasztok. A katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 18, 2025 at 10:33 PM, Czeilinger Krisztián : Nemsokára fent. July 19, 2025 at 12:02 AM July 19, 2025 at 12:02 AM, Rácz Dániel / FA : CA 1-es AGV kiállítva a 104 es node ponton. Annyira koszos a kereke hogy nem tud felmenni a trepnire. Sajnos hely szűke miatt nem tudjuk elforgatni hogy villával előre hátha feltudna menni. July 19, 2025 at 2:09 AM, Kokhan Yurii : A katod raktár AGV megállt. Nézzétek meg légyszíves. Köszönöm July 19, 2025 at 2:13 AM, Czeilinger Krisztián : Megyek. July 19, 2025 at 2:15 AM, Csanálosi Gábor FA : Megindult July 19, 2025 at 2:17 AM, Csanálosi Gábor FA : @Kokhan Yurii a 2-es agv az egyes sorra viszi a palettát, de ott van még az előző. Le tudjátok szedni? July 19, 2025 at 2:20 AM, Kokhan Yurii : Rendben July 19, 2025 at 3:09 AM, Kokhan Yurii : A katod Airshower AGV megállt. Nézzétek meg légyszíves. Köszönöm July 19, 2025 at 3:10 AM, Csanálosi Gábor FA : Láttuk igen, most indulunk July 19, 2025 at 4:20 AM, Kokhan Yurii : A katod oldal AGV megállt. Nézzétek meg légyszíves. Köszönöm July 19, 2025 at 4:29 AM, Csanálosi Gábor FA : Megy. :) July 19, 2025 at 4:31 AM, Kokhan Yurii : Köszönöm July 19, 2025 at 6:13 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2+1): Brázik János Csepi Árpád ———————————— July 19, 2025 at 6:29 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.07.19. "B" műszak, 10Tech, 1OP, 1Sup, 1SL Overtime(0): Holiday(2): Takács Ádám, Gombos Norbert(OP) Sick(1): Gerbovits Kevin Shift Change(0): Translater: --------------- Electrode(4): Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, Böröczki Balázs NC Op: Nagy Sándor --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Formation/Modul(2): Denkó János, Boromissza Zoltán ------------

Chunk 971:
March 14, 2025 at 11:05 AM, Sazzad Bhai SKon invited duzzaman Md (MCS).
March 14, 2025 at 11:37 AM, 연해리: 어떤 공정쪽 말씀이실까요??
March 14, 2025 at 11:38 AM, 김상훈: 양극입니다.
March 14, 2025 at 11:39 AM, 연해리: This message was deleted.
March 14, 2025 at 11:40 AM, 연해리: 조립쪽 말씀이실까요?
March 14, 2025 at 11:41 AM, 김상훈: 1F NC 양극이요
March 14, 2025 at 11:41 AM, 연해리: 동시간에 SAT가 있어서 오후 4시 괜찮으실까요?
March 14, 2025 at 11:42 AM, KIM SEYEON [김세연]_FA: @이승엽 매니저님 In out 포트 워크 가이드 In 6개 out 6개 수령했습니다.

Chunk 972:
March 14, 2025 at 11:43 AM, 연해리: 화면이 필요하신거면 저희 카메라로 찍으시는게 나을 것 같습니다
March 14, 2025 at 11:43 AM, 김상훈: @KIM SEYEON [김세연]_FA @연해리 전극/조립 AP Firmware 업데이트 작업 현황입니다. 아래 3대를 제외한 전체 AP 완료 - 분체 양극 E-FA-SF-113, Hookup UTP 문제로 작업 불가, Hookup 해결 후 예정 - 1F NC 음극 장폭용 2대 전원 Off 상태로, 장폭 AGV 테스트 시 완료 예정
March 14, 2025 at 11:44 AM, 김상훈: 화면을 모두 캡춰하여 PPT로 만들어두었습니다. 파일만 카피하시면 됩니다.
March 14, 2025 at 11:45 AM, 연해리: 키오스크는 기본적으로 보안 USB 인식이 안되는걸로 알고있습니다..

Chunk 973:
March 14, 2025 at 11:46 AM, 김상훈: 헛짓거리했네요. 그럼 파일 열어서 카메라로 찍어주시는 방법밖에 없겠네요.
March 14, 2025 at 1:11 PM, 심찬울: @정재훈 @송광진PM FA장비unit @연해리 gf 음극 1시뷰터 입고즁이라고하여 1F 음극 분체로 현장 변경 가능할끼요?
March 14, 2025 at 1:14 PM, 송광진PM FA장비unit: gf양극으로 보시죠~
March 14, 2025 at 1:25 PM, 조범석: 제가 키오스크에있는 파일 pm님께 메일로 전달드리겠습니다.
March 14, 2025 at 2:31 PM, 최대운: @KIM SEYEON [김세연]_FA @유병일 전극롤 음극 4라인 지금부터 생산한다고 합니다. 금일 오전까지 일부 호기 리트라이 점검 중이였으나 지금부터 못한다고 합니다. 그래서 음극 4라인은 생산이니 리트라이 점검은 배제 하도록 하겠습니다.

Chunk 974:
March 14, 2025 at 2:39 PM, KIM SEYEON [김세연]_FA: 프레스 말씀이신거죠?
March 14, 2025 at 2:40 PM, KIM SEYEON [김세연]_FA: 네 4라인분은 배제해주십시오 생산 데이터로 보시지요.
March 14, 2025 at 2:51 PM, 최대운: AGV 추가 투입 할까요?
March 14, 2025 at 2:53 PM, 최대운: 생산이 4라인이 아니고 3라인이라고 합니다. 3라인을 배제 하겠습니다.
March 14, 2025 at 3:01 PM, KIM SEYEON [김세연]_FA: @최대운 매니저님 저희 테크니션이 추가 투입하고 있습니다. 문제 있으면 말씀드리겠습니다.
March 14, 2025 at 3:01 PM, 최대운: 네 알겠습니다.
March 14, 2025 at 3:41 PM, KIM SEYEON [김세연]_FA: Photo

Chunk 975:
March 14, 2025 at 3:41 PM, KIM SEYEON [김세연]_FA: @최대운 매니저님 저희 쉬프트리더가 상기 agv는 acs에 연결안된다고 합니다. 점검 가능할까요?
March 14, 2025 at 3:53 PM, 최대운: 네 확인 하겠습니다.
March 14, 2025 at 4:08 PM, 최대운: GF 회의실에 있습니다.
March 14, 2025 at 5:15 PM, 최대운: 전극 gf roll 양극 agv 17호기(rear rsl센서 청소용액이 묻은상태로 굳어서 센서 계속걸려서 투입 불가) 빼고 그 외 호기는 다 살렸습니다.
March 17, 2025 at 7:04 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 금일도 9시 10분부터 전극롤 음극 rw 리트라이 검증 테스트 계속 진행하겠습니다. 오전 09:10~11:30 점심 후 13:30~16:30 진행하도록 담당자 지원 부탁드립니다.

Chunk 976:
March 17, 2025 at 7:04 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 17, 2025 at 7:06 AM, 유병일: @KIM SEYEON [김세연]_FA 펨님 테크 니션 담당자 지정해주실때 릴리님 통해서 저번에 설명했던 것 그대로 전달 부탁드립니다~!
March 17, 2025 at 8:49 AM, 최태영: 금일 09시 전극 알람 데일리 미팅 리마인드 드립니다~
March 17, 2025 at 8:49 AM, 유병일: 매니저님 어디서 시작하시나요?!
March 17, 2025 at 8:54 AM, 이승엽: 네
March 17, 2025 at 8:57 AM, 최대운: 지난주와 동일한 위치 음극 7라인에서 시작하고자 합니다.

Chunk 977:
March 17, 2025 at 9:28 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 @이승천 1. 3/18(화) GF 노칭 양극 노칭 테스트 10:00~ 2. 3/21(금) GF 노칭 음극 노칭 테스트 10:00~ 상기 일정으로 물동량 검증 맞는지 재확인 부탁드립니다. 확정이 되어야 테스트 자재 등록 하고자 합니다. 10시 전부터 준비하고 가능한지도 확인 부탁드립니다.
March 17, 2025 at 9:29 AM, 유병일: 진행하시면되고 바이패스 모드와 실자재 정리까지 요청해놨습니다
March 17, 2025 at 9:33 AM, 유병일: 10~18시이니 참고 부탁드립니다!
March 17, 2025 at 1:13 PM, 이승엽: @KIM SEYEON [김세연]_FA PM님. 아까 유선 상 말끔하신 슬리터 MP 키오스크 고정 작업 명일 진행 예정입니다.
March 17, 2025 at 1:13 PM, 이승엽: Photo

Chunk 978:
March 17, 2025 at 4:16 PM, KIM SEYEON [김세연]_FA: @이승엽 매니저님 @정재훈 피엠님 혹시 금일 랩업회의 17시30분에 가능할까요?
March 17, 2025 at 4:20 PM, 정재훈: 내일부터 당분간 16시부터 가능 할까요 앞으로 논의 할 사항이 많아 오래 걸릴것 같아요
March 17, 2025 at 4:21 PM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 17, 2025 at 4:21 PM, 정재훈: @이승엽 다른 항목으로 17시부터 진행할께요
March 18, 2025 at 8:04 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 금일도 9시 10분부터 전극롤 음극 rw 리트라이 검증 테스트 계속 진행하겠습니다. 오전 09:10~11:30 점심 후 13:30~16:30 진행하도록 담당자 지원 부탁드립니다.
March 18, 2025 at 8:16 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다

Chunk 979:
March 18, 2025 at 8:43 AM, 최태영: 금일 09시 조립 알람 데일리 미팅 리마인드 드립니다~
March 18, 2025 at 9:23 AM, 유병일: @최대운 매니저님 gf nc 양극 시작전에 말씀 한번 부탁드립니다! 생산중인5,6라인때문에 노칭쪽 업체랑 확인 후 진행하려합니다
March 18, 2025 at 9:33 AM, 최대운: 저희는 다 현장에 있습니다. 준비가 완료 되어야 시작 가능합니다.
March 18, 2025 at 9:52 AM, 유병일: 넵 현재 릴까지만 생산 마무리 짓고 test 가능하니 완료되면 전달드릴게요
March 18, 2025 at 9:53 AM, 유병일: 프로그램적용까지 약 30분 정도 소요될예정이니 참고 부탁드립니다
March 18, 2025 at 9:54 AM, 최대운: 네 현장에서 체크 중입니다. 현장 종료 되면 조금씩 준비하면서 하면될것 같습니다.

Chunk 980:
March 18, 2025 at 10:21 AM, 최대운: 현재 생산 정리하면 일부 출고 포트에 6매거진이 안되어 출고 포트에 일부 매거진이 있는 상태면 처리를 어떻게 해야될까요?
March 18, 2025 at 12:09 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 설비 등의 준비로 테스트는 11:30분부터 시작하였습니다. 일부 변경한 사항 - 로봇 속도 50%->80%업 - AGV 턴속도: 0.06–>0.25m/s - 포킹 딜레이 제거 테스트는 16:00정도까지 진행하고 남은 시간은 데이터 정리 등으로 마무리 하겠습니다.
March 18, 2025 at 1:57 PM, 정재훈: 14:40분부터 ACS명령으로 AGV반송CAPA만 따로 확인 할께요 리뷰시 구분해서 알려주세요
March 18, 2025 at 1:58 PM, 최대운: 네 알겠습니다.

Chunk 981:
March 18, 2025 at 2:00 PM, 최대운: 그럼 16:40분까지 2시간 테스트하고 마무리하고 정리하도록 하겠습니다.
March 18, 2025 at 4:18 PM, 김상훈: @KIM SEYEON [김세연]_FA @연해리 1F NC AP 채널을 변경하는 중인데, 현재 상황을 그림으로 보여드립니다.
March 18, 2025 at 4:19 PM, 김상훈: Photo
March 18, 2025 at 4:19 PM, 김상훈: EU?_mobile 채널 변경이 언제 가능한 지 확인부탁드립니다.
March 18, 2025 at 4:19 PM, KIM SEYEON [김세연]_FA: 네 확인해보겠습니다
March 18, 2025 at 5:08 PM, 김상훈: Photo
March 18, 2025 at 5:09 PM, 김상훈: 우서 저희가 피해서 3, 6, 9번으로 피신은 했는데 좀 불안정합니다

Chunk 982:
March 18, 2025 at 6:43 PM, 유병일: @강기훈 매니저님 gf nc 양극 테스트 종료 아직일까요?!
March 18, 2025 at 6:58 PM, 최대운: 생산에 진행할수 있도록 공매거진 수동 공급 진향하고 있습니다.
March 18, 2025 at 7:03 PM, 양원석: 테스트 정리 마무리되면 GF 조립카톡방에 공지부탁드립니다. -유병일-
March 18, 2025 at 7:11 PM, 최대운: 현재 플레이트는 현장에서ㅜ정리 완료 했으며, MCS 및 SCS상 데이터 정리를 진향 중입니다.
March 18, 2025 at 7:55 PM, 유병일: 네 18시까지였어서 생산가능하게되면 공지로 맘 리만 해주세요
March 18, 2025 at 8:23 PM, 최대운: 생산은 6시 50분 전후부터 진행했으며, 데이터 정리도 7:20전후 완료 되어 문제 없이 진행은 도고 있었습니다. 제가 생각했던것 보다 매거진 정리가 다소 시간이 소요되었습니다.

Chunk 983:
March 19, 2025 at 7:45 AM, 김희용 invited 동현.
March 19, 2025 at 7:45 AM, 김희용: .
March 19, 2025 at 8:46 AM, 김상훈: @KIM SEYEON [김세연]_FA @연해리 조립 로봇 5번 BCR RJ 잭 교체, 오전에 해도 돼요?
March 19, 2025 at 8:46 AM, KIM SEYEON [김세연]_FA: 네 오전에 빨리 부탁드립니다. 얼마나 걸릴까요?
March 19, 2025 at 8:47 AM, 김상훈: 11시까지 끝내께요
March 19, 2025 at 8:47 AM, KIM SEYEON [김세연]_FA: 네 연해리 피엠님이 같이 봐주십시오
March 19, 2025 at 8:50 AM, KIM SEYEON [김세연]_FA: 잭 교체 이외사항은 내일 조치 부탁드립니다. 감사합니다.

Chunk 984:
March 19, 2025 at 11:37 AM, 김상훈: 점검은 모두 마쳤고, 이상이 없어서 현재 상태 유지하겠습니다. 다른 점검은 내일 하겠습니다.
March 19, 2025 at 1:15 PM, 연해리: @이승엽 @김상훈 매니저님 방금 1F 음극 노칭룸에서 AGV들 AP가 모두 날아갔는데, 금일 17시까지는 수정 중지 부탁드립니다.
March 19, 2025 at 1:15 PM, 연해리: 조립 1F 전 개소 포함입니다.
March 19, 2025 at 1:23 PM, 연해리: @김상훈 매니저님 지금 조립 1F 음극 노칭 AP 문제로 ACS 링크 아웃 에러 지속 발생중인데 염종일차장님, 강기훈매니저님 지원 부탁드립니다
March 19, 2025 at 1:32 PM, 이승엽: 일단 강기훈 매니저와 시너스텍 담당자 가고ㅠ있습니다
March 19, 2025 at 1:32 PM, 이승엽: 금일 따로 수정 작업 진행한 부분은 없는 것으로 확인됩니다

Chunk 985:
March 19, 2025 at 1:49 PM, KIM SEYEON [김세연]_FA: @김상훈 명일 오전 10시에 노칭1F 음극 5G로 전부 변경하기로 했습니다. (유럽dt)
March 19, 2025 at 1:50 PM, 김상훈: 네
March 19, 2025 at 1:59 PM, 김상훈: Photo
March 19, 2025 at 2:00 PM, 김상훈: Photo
March 19, 2025 at 2:01 PM, 김상훈: 위의 그래프는 어제 오후에 설정한 것이고
March 19, 2025 at 2:01 PM, 김상훈: 아래는 금일 13시 50분 경에 6번 .AP를 7 번 채널로 변경한 겁니다.
March 19, 2025 at 2:02 PM, 김상훈: EU_mobile이 1, 11번을 쓰다가, 1, 6, 11로 자동으로 채널을 바꾸면서 사용 중인 것이 문제의 원인이 되겠습니다. 이래서 제가 회의에서 자동채널은 선호하지 않는 다고 말씀드린 이유입니다.

Chunk 986:
March 19, 2025 at 2:02 PM, KIM SEYEON [김세연]_FA: 내일 다 끄고 상황을 보시죠
March 19, 2025 at 2:06 PM, 강기훈: 채널이 유동적이라 이후 또 재발할 수 있어 공정감사 시 NC, ST에 온 법인 PM님들과 시너스텍 인원 1명씩 대응할 예정입니다
March 19, 2025 at 2:06 PM, KIM SEYEON [김세연]_FA: 감사합니다!
March 19, 2025 at 2:10 PM, 강기훈: @Kim Dongju(김동주)_FA @연해리 @방혁 PM(Bang.Hyuk) FA 1F NC AN AP#13은 현재 일부러 꺼둔 AP 입니다 현장 확인 시 전원이 커져있어 다시 OFF 하였으니 참고 부탁드입니다
March 19, 2025 at 2:13 PM, 연해리: 네 알겠습니다

Chunk 987:
March 19, 2025 at 2:34 PM, 강기훈: 1F ST AN 10라인 스테이션 이적재 에러(ALIGN LIMIT) AGV#3 조치 및 잔여호기 점검 완료했습니다
March 19, 2025 at 2:38 PM, Kim Dongju(김동주)_FA: 네..감사합니다.
March 19, 2025 at 3:47 PM, 강기훈: @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 피엠님, 1층 조립 방금 공정감사 완료된 것으로 전달 받았습니다 지금부터 작업인원 출입 후 진행 가능한지 문의드립니다
March 19, 2025 at 3:55 PM, KIM SEYEON [김세연]_FA: 아직입니다. 조금만 더 기다려주세요.
March 19, 2025 at 4:44 PM, KIM SEYEON [김세연]_FA: 노칭1F 양음극 지금 모두 5G로 바꾸었습니다. @김상훈 이제 간섭없도록 잘 조정해주세요.

Chunk 988:
March 19, 2025 at 4:44 PM, 김상훈: @연해리 PM님, 전극조립 보안에서 언급한 사설이라고 해야 하나, 그 AP 들에 대해 C&C, 시너스텍 등 확인해보았으나, 현재 사용하는 인원이나 장비는 없습니다. 혹시나 해서 휴대폰으로 Hotspot쓰는 인원도 확인해보았으나 없습니다. 보안팀에 한번 더 확인 부탁드립니다.
March 19, 2025 at 4:45 PM, 김상훈: 네, 확인 후 조정하겠습니다.
March 19, 2025 at 5:13 PM, KIM SEYEON [김세연]_FA: Photo
March 19, 2025 at 6:02 PM, KIM SEYEON [김세연]_FA: @이승엽 매니저님 명일 1ㅇ시 GF 순환물류서 벨트교체하는것으로 알겠습니다.
March 19, 2025 at 6:02 PM, 이승엽: 넵 음극에서 진행하겠습니다.
March 20, 2025 at 8:48 AM, 이승엽: 10시 반 GF 스태킹 음극으로 조정하고자 하는데 괜찮으신지요

Chunk 989:
March 20, 2025 at 8:58 AM, 김희용: 금일 전극/조립 SAT 제출서류 개선항목 논의미팅 리마인드 드립니다
March 20, 2025 at 9:00 AM, 김희용: 이석규 매니저님 헝가리 출근 후로 미팅은 재조정 하겠습니다
March 20, 2025 at 9:08 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다
March 20, 2025 at 9:14 AM, 이승엽: 네 알겠습니다
March 20, 2025 at 9:53 AM, 송광진PM FA장비unit: @이승엽 매니저님 추가PO건 sat검수항목 메일드렸습니다 리뷰가능한 일정 확인부탁드려요(금일 오후4시에도 가능합니다)
March 20, 2025 at 10:04 AM, 이승엽: 네 그 때 하시지요

Chunk 990:
March 20, 2025 at 10:20 AM, 송광진PM FA장비unit: @이승엽 매니저님 gf nc 신규 가이드 설치는 음극 5라인에 설치부탁드립니다. 아까 같이본 알람은 디버터 구간 알람으로 잘못 확인하였습니다.
March 20, 2025 at 10:55 AM, 송광진PM FA장비unit: 음극 5-2호기에만 설치예정입니다. 업무에 참고부탁드려요
March 20, 2025 at 11:06 AM, 이승엽: PM님. 한 포트에 4개 씩 2쌍이 들어가는데, 전달 드린 6개가 모두 한 방향으로만 드려서 반대방향 짜리 4개 씩 더 전달 드려야할 것 같습니다.
March 20, 2025 at 11:06 AM, 이승엽: 잠깐 사무실 다시 들르겠습니다

Chunk 991:
March 20, 2025 at 11:31 AM, 이승엽: @송광진PM FA장비unit PM님. 사무실에 아무도 안 계셔서 책상 위에 In 4개, Out 4개 올려 놓았습니다. 확인 부탁 드립니다. 해당 파트들도 이번에 라운딩 가공해 주신 것처럼 동일하게 가공 후 돌려 주시면 5-2 포트에 좌우 짝이 맞도록 설치하도록 하겠습니다.
March 20, 2025 at 11:31 AM, 송광진PM FA장비unit: 넵
March 20, 2025 at 11:33 AM, 정지윤: @배병민 (Bae Byoungmin) 금일 설명드린 리모컨 관련하여 내용 공유드립니다. 15번 모드 전환 2번 브레이크 off 이고, 도면 확인 시 나머지 버튼은 주행버튼이기에 사용하지 않도록 공유 부탁드립니다. 추가적으로 현장에서 잘못 말씀드린게 2번은 break off기능만 있기에, 메인트 존으로 들어간 카는 전원을 off해야 브레이크가 잠기니 메인트 작업 시에는 전원을 내리고 작업 부탁드립니다.

Chunk 992:
March 20, 2025 at 12:16 PM, 배병민 (Bae Byoungmin): 네 정보 감사드립니다.

Chunk 993:
March 20, 2025 at 12:18 PM, 강기훈: @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 @Baek Hojong(백호종)FA 피엠님 현장에서 쉬프트리더와 문제점 공유 받았고 내용정리 및 점검방안 공유 드립니다 음극 1. 현상 : 140번 노드에서 1호기 무언정지 발생 - 방안 : 140번 노드 위치조정, 이후 재발 시 AGV Wheel Align 점검(Valibration) 양극 1. 현상 : 에어샤워 안에서 3호기 Abnormal go step timeout 발생 - 방안 : 주행 맵설정 점검 및 포크 업다운 구간 노드 설정값 확인 예정 2. 28번 노드에서 AGV Station Docking시 슬립발생 - 방안 : 간혈적으로 발생되는 구간, 바닥레벨 편차 있음으로 슬립발생 추정됨, 도킹전 노드 변경 가능여부 검토 예정 3. 현상 : 에어샤워 이동 중 Lift pos abnormal 발샹 - 방안 : ACS 노드별 포크 위치 확인구간 점검예정 추가적으로 이틀치(3/18-19) 에러발생 내역 분석 후 문제점 조치예정입니다

Chunk 994:
March 20, 2025 at 12:18 PM, KIM SEYEON [김세연]_FA: 감사합니다.
March 20, 2025 at 1:24 PM, 최대운: @KIM SEYEON [김세연]_FA @유병일 테스트 관련 요청 드립니다. 1. 명일 (3/21) GF 노칭 음극 테스트 일정 재확인 부탁드립니다. (10:00~18;00) - 지난번 처럼 사전에 다른 EQ설비 바이패스 기능 반영 부탁드립니다. 2. 원래 차주 월화 분체 음극 자체 및 물동량 검증을 수행하고자 하였으니 자재 이동 등이 필요하여 화(3/25), 수(3/26) 변경 진행 해도 될까요? - 현재 테스트 자재가 양극에 있습니다. 명일 또는 월요일까지 테스트 자재를 음극 창고로 이동 요청드립니다. (테스트 자재는 R로 시작합니다. 수량: 15pallet) - 명일까지 이동 가능하다면 월/화 수행해도 괜찮습니다. 확인 후 회신 바랍니다.

Chunk 995:
March 20, 2025 at 2:17 PM, Kim Dongju(김동주)_FA: @이승엽 자체적으로 디버터 벨트 텐션 조절 테스트 하려했는데..볼트 푸는 공간이 너무 협소하여 쉽지가 않아 포기했습니다. 금일 체결 못한 신규 벨트를 향후 재체결 하겠지만, 컨베이어 롤러를 빼지 않고선 벨트 교체가 쉽지 않아 보입니다.
March 20, 2025 at 2:27 PM, 이승엽: 이후 다시 한 번 교체 등 진행 시 시연하도록 하겠습니더
March 20, 2025 at 2:27 PM, 이승엽: @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 혹시 현재 1F 분체 음극에 생산이 있는지요? 사유는 1F RTV 쪽 작업을 좀 할 수 있을까하여 문의 립니다.
March 20, 2025 at 2:39 PM, 이승엽: 설비 비가동 안하고 스페어 존에서 점검 가능할거 같습니다

Chunk 996:
March 20, 2025 at 4:00 PM, 유병일: 매니저님 음극 테스트자재는 요청중에잇고, 양극 분체 agv test 가능한 일정으로4/1-4로 공유받았습니다.
March 20, 2025 at 4:01 PM, 이승엽: @송광진PM FA장비unit 4시 리뷰 진행하시는거죠? 가고 있습니다
March 20, 2025 at 4:16 PM, 최대운: 그럼 차주에 음극 테스트하고 물동량 검증 할 수 있게 자재 준비 부탁드립니다.
March 20, 2025 at 4:26 PM, 유병일: 음극 자재 준비가 어렵다고해서 따로 요청중이라 양극 우선 진행하시고 음극은 자재 준비되면 공유드릴게요
March 20, 2025 at 4:34 PM, 유병일: 제조에 일정 공지가 필요해서 우선 양극 테스트 일정수립되면 공유부탁드립니다

Chunk 997:
March 20, 2025 at 4:40 PM, 최대운: 차주에는 양극 생산이 많은가요? 생산이 많지 않으면 같이 진행하면 어떨까 싶어서요. 양극이라도 차주 끝낼수 있으면 좋을것 같아서요
March 20, 2025 at 6:05 PM, 문진영: @KIM SEYEON [김세연]_FA PM님 문의하신 양극 릴창고 52호기 간섭 회피 배선 정리 작업인데 음극 51호기도 간섭될 듯 하여 자체 개선 작업 진행하는 건입니다.
March 20, 2025 at 6:32 PM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 20, 2025 at 6:33 PM, 문진영: @유병일 PM님 분체 RTV EIP통신 끊김 관련 해당 통신 케이블 교체 후 모니터링 예정입니다.

Chunk 998:
March 20, 2025 at 6:50 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 점검이 필요한 호기 공유드립니다. (그외 호기는 투입 가능합니다. ) 금일 데일리시 말씀드렸듯이 GF/1F 노칭은 전도 위험을 고려하여 일부 티칭 점검이 필요한 호기가 있습니다. 별도 티칭이 필요한 호기 및 필요 점검 시간을 확인하여 메일로 공유 드리겠습니다. (현재 생산 호기 유지) 1F VD 양극: 전호기 가능 1F VD 음극: 전호기 가능 1F Stacking 양극: 9, 15, 17호기 1F Stacking 음극: 12(양극 주차중) GF VD 양극: 전호기 가능 GF VD 음극: 3호기 GF Stacking 양극: 전호기 가능 GF Stacking 음극: 전호기 가능 전극 Roll 양극: 22호기 전극 Roll 음극: 21, 27, 28호기

Chunk 999:
March 21, 2025 at 7:45 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 현재 GF VD 음극 전창고에 공자재가 없습니다. 금주 양극만 비가동해서 음극 실자재가 VD 후창고에 있다보니 전창고 공자재가 없는 상황(11개) 입니다. 테스트를 차주 공매거진 생기는 시점으로 미뤄야할것 같습니다.
March 21, 2025 at 7:48 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다
March 21, 2025 at 8:16 AM, 최대운: 1. 비가동 잡아주셨으니 생산라인 이번에 음극은 티칭점검 완료한다. (양극은 EQ설비 한대씩 남은 호기 진행) 그리고 차주 테스트를 위해 추가 비가동 잡아 주셔야합니다. 2. 그냥 오늘은 생산하고 차주 비가동 잡아주시고, 생산라인은 양극 처럼 1호기씩 티칭 점검한다. 상기 둘 중 하나 정해주시면 수행하겠습니다.
March 21, 2025 at 8:46 AM, KIM SEYEON [김세연]_FA: 1안으로 갑니다.

Chunk 1000:
March 21, 2025 at 9:00 AM, KIM SEYEON [김세연]_FA: 제조에 비가동 이야기 되었습니다. GF NC 음극 10시부터 18시까지 진행해주십시오.
March 21, 2025 at 9:05 AM, 최대운: 네 알겠습니다. 오늘까지 생산라인 투입하지 않은 호기(4대)까지 티칭 점검 완료 하겠습니다. 저검은 완료 하지만 혹시 모르니 GF 노칭 음극 전호기 투입은 차주 월요일부터 부탁드립니다. 나머지 GF 양극, 1F 노칭은 생산라인 점검 확인 후 공유 드리겠습니다.
March 21, 2025 at 9:05 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 21, 2025 at 9:32 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 1F Stacking 충전기 옆 앙커 작업 진향하겠습니다. 자체 청소기가 있어 먼지 안날리게 하겠습니다. 완료되면 공유 하겠습니다.

Chunk 1001:
March 21, 2025 at 9:54 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 21, 2025 at 9:54 AM, KIM SEYEON [김세연]_FA: @방혁 PM(Bang.Hyuk) FA 피엠님이 가서 작업하는거 봐주세요.
March 21, 2025 at 11:19 AM, 최대운: 앙커 작업 완료하였으며, 주변정리도 완료 하였습니다.
March 21, 2025 at 12:03 PM, KIM SEYEON [김세연]_FA: 감사합니다
March 21, 2025 at 12:56 PM, 김상훈: @KIM SEYEON [김세연]_FA @연해리 VD 창고에서 사용하는 5GHz 대역에서 간섭이 심하여, 일부 채널 조정하고 있습니다. 우선 비어있는 채널로 조정 후 현황 파일 업데이트해서 송부드리겠습니다.
March 21, 2025 at 12:56 PM, 김상훈: Photo

Chunk 1002:
March 21, 2025 at 3:00 PM, KIM SEYEON [김세연]_FA: @김상훈 매니저님 3월15일자 전조 AP자료에 VD룸은 빠져있습니다. VD 자료 부탁드립니다.
March 21, 2025 at 3:08 PM, 김상훈: VD까지 포함해서 작성 중입니다 차주 초에 보내드릴께요
March 21, 2025 at 6:46 PM, 최대운: @KIM SEYEON [김세연]_FA @유병일 GF 노칭 음극 전호기 티칭점검 완료하고 6:20 분에 Auto 전환하였습니다.
March 21, 2025 at 6:47 PM, KIM SEYEON [김세연]_FA: 감사합니다
March 24, 2025 at 8:52 AM, 최태영: 금일 09시 전극 알람 데일리 미팅 리마인드 드립니다~

Chunk 1003:
March 24, 2025 at 9:01 AM, 최대운: @KIM SEYEON [김세연]_FA @유병일 BP사 출입증 연장하기 위해 지난주에 신청하고자 했는데, 출입신청 담당자 검색이 안되고 있습니다. 빠른 확인 부탁드립니다.
March 24, 2025 at 9:06 AM, KIM SEYEON [김세연]_FA: 혹시 김동주 연해리 피엠님도 검색이 안되나요?
March 24, 2025 at 9:07 AM, 송광진PM FA장비unit: @문진영 매니저임 오늘 분체 추가po건 sat는 13:30에 진행가능하실까요?
March 24, 2025 at 9:11 AM, 최대운: 안되고 최종 결재담당자인 PL님도 검샥안되고 있습니다.
March 24, 2025 at 9:12 AM, 문진영: 현장 검수 13시 반 괜찮습니다.
March 24, 2025 at 9:14 AM, KIM SEYEON [김세연]_FA: 잠시만요

Chunk 1004:
March 24, 2025 at 9:15 AM, KIM SEYEON [김세연]_FA: 다른피씨도 안되나요?
March 24, 2025 at 9:16 AM, 최대운: 네 저희쪽에도 다 안되고 있습니다.
March 24, 2025 at 9:54 AM, KIM SEYEON [김세연]_FA: 유럽it에서 확인하고 있으니 조금만더 기다려주세요.
March 24, 2025 at 10:19 AM, KIM SEYEON [김세연]_FA: @김상훈 매니저님 미팅 10시반 행정동2F 지타회의실입니다.
March 24, 2025 at 10:21 AM, 김상훈: 와있습니다
March 24, 2025 at 11:26 AM, 김상훈: Photo
March 24, 2025 at 11:35 AM, KIM SEYEON [김세연]_FA: @최대운 매니저님 출입신청 문제 해결되었으니 다시 올려주시겠어요?
March 24, 2025 at 11:56 AM, 최대운: 네 알겠습니다. 감사합니다.

Chunk 1005:
March 24, 2025 at 12:40 PM, 김상훈: @연해리 오후 1시반에 GF ST에서 AP 및 AGV 테스트해보려고 합니다. ㅅ ㅣ간되시면 같이 보시지요
March 24, 2025 at 12:42 PM, 연해리: 2시에 CO 관련 미팅이 있어서,, 1시 가능하실까요??
March 24, 2025 at 12:42 PM, 김상훈: 그러시죠
March 24, 2025 at 1:09 PM, 문진영: 13시 30분부터 1F 분체 음극에서 SAT 현장 검수 진행하겠습니다.
March 24, 2025 at 1:39 PM, 유병일: @최대운 매니저님 음극 코터 agv 관련 확인 부탁드리겠습니다. (윤준기 사원님 현장 확인) 롤 20호기 메뉴얼 이동 불가로 케이블 점검 요청. 음극 충전기 2번,1번 노드 수정 필요.
March 24, 2025 at 1:40 PM, 최대운: 네 알겠습니다.

Chunk 1006:
March 24, 2025 at 3:42 PM, 최대운: @KIM SEYEON [김세연]_FA @유병일 1F 분체 양극 에어샤워 지나고 나면 오른쪽 포대자루 때문에 화물이 계속 감지되고 있습니다. 포대자루 이동 요청드립니다. 야간에는 작업자 없을경우 오랜시간 감지로 에러 발생 우려가 있습니다.
March 24, 2025 at 3:44 PM, Baek Hojong(백호종)FA: 전극 제조에 요졍하겠습니다 매니져님
March 24, 2025 at 4:24 PM, 유병일: @이연수 매니저님 아래내용 확인 부탁드립니다 16:15 플레이백. 포일 agv 블락 케이스 확인 요청. 1호기 77노드에서 멈춰서 점검 중. 2호기가 1호기에 블락잡힘. 1호기 심에서 없애니 이동되고, 이동 시 서로 간섭 없었음.

Chunk 1007:
March 24, 2025 at 4:32 PM, 유병일: @이연수 추가로 16:22~ 코터 agv 3호기 118대기노드 기점으로 계속 돌고 있고, 4호기는 3호기에 블락잡혀서 이동 못하고 있는데 해당 내용도 확인 같이 부탁드려요. 양극측에서 아직 계속 순환하고 있는 현상이랑 같아보입니다.
March 24, 2025 at 4:52 PM, KIM SEYEON [김세연]_FA: @이승엽 매니저님 금일 랩업회의는 17시 행정동GF입니다.

Chunk 1008:
March 25, 2025 at 8:38 AM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 1F 분체 양극 맵 최신화 업데이트(ACS 업데이트 약 10분소요) - 그 이후 AGV 1대씩 점검예정, 생산에 영향 없이 진행 1F 노칭 양극 - 명일 신규 맵 업데이트 및 운영 진행 예정 - 변경관리 금일 신청 예정 1F 노칭 음극 - AGV 맵 반영이 아직 안된 상황 - 금주중 AGV 맵 업데이트 후 ACS 전달 - 차주 초 ACS 업데이트하여 신규 맵으로 운영
March 25, 2025 at 8:55 AM, 최태영: 금일 09시 조립 알람 데일리 미팅 리마인드 드립니다~
March 25, 2025 at 8:58 AM, 이승엽: 한 10분 정도 이후에 진행 가능하실지요
March 25, 2025 at 9:01 AM, 최태영: 네 알겠습니다~

Chunk 1009:
March 25, 2025 at 9:07 AM, 이승엽: 저는 내부 미팅으로 탐석이 어려워서 이석규M, 그리고 영역별 매니저님, 시너스텍 참석하도록 하겠습니다.
March 25, 2025 at 9:08 AM, 최태영: 넵 참고하겠습니다~
March 25, 2025 at 10:00 AM, 강기훈: @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 피엠님, 금일 분체 KIOSK 위치이동 관련 오전 11시 30분에 현장에서 KIOSK 위치 최종확인 후 앙카작업 진행하려 합니다 시간 참고하시어 현장에서 점검가능한지 검토 부탁드립니다
March 25, 2025 at 10:06 AM, 연해리: Photo
March 25, 2025 at 10:07 AM, 연해리: @김상훈 매니저님 전극쪽 AP 아직 숨김처리 안되었습니다. 확인 부탁드립니다

Chunk 1010:
March 25, 2025 at 10:15 AM, 최대운: @KIM SEYEON [김세연]_FA GF VD 음극 AGV 3호기 모서리쪽 범퍼고장나서 투입을 못하고 있습니다. 1. 혹지 스페어자재 있으시면 빌려주시면 조치하고 투입하겠습니다. (빌려주신 자재는 4/5이후 반입하여 전달 가능) 2. 4/5일 이후 자재가 반입되어 반입 이후 조치하고 투입 가능합니다. 2가지 중 한가지 결정해주시면 맞추도록 하겠습니다.
March 25, 2025 at 11:11 AM, 송광진PM FA장비unit: 11:40분까지갈게요~
March 25, 2025 at 11:17 AM, 김상훈: .내일까지 할게요
March 25, 2025 at 11:17 AM, 김상훈: 근데 이게 다인가요?
March 25, 2025 at 11:26 AM, KIM SEYEON [김세연]_FA: 자재명을 공유해주십시오. @Kim Dongju(김동주)_FA 피엠님 스페어가 있는지 확인부탁드립니다

Chunk 1011:
March 25, 2025 at 11:31 AM, KIM SEYEON [김세연]_FA: @Kim Dongju(김동주)_FA 피엠님도 송광진pm님과 분체 펜스 확인 가능할까요?
March 25, 2025 at 11:34 AM, 연해리: Photo
March 25, 2025 at 11:34 AM, 연해리: 전극쪽 전체적으로 다시 봐주셔야할 것 같습니다
March 25, 2025 at 11:57 AM, 송광진PM FA장비unit: 바코드거치대 슬하까지 넣는걸로 했고 agv센서 감지 시 현장에서 위치 재협의하는 걸로 했습니다
March 25, 2025 at 11:58 AM, 최대운: AGV-01-05-02(405(L)38330(D)*70(H) 다각형) 이 자재 입니다.

Chunk 1012:
March 25, 2025 at 12:08 PM, 양원석: @이연수 @조범석 C2STKA71_P20 포트에 MLA9213이 있었으나, ACS에서 해당 화물 잡에서는 MLA9005로 인식되어 떠감. (1FA VD, 25.03.25 04:39:10 확인)
March 25, 2025 at 12:08 PM, 양원석: 로그 확인부탁드립니다
March 25, 2025 at 12:14 PM, 이연수: P19에 MLA7001 P20에 MLA9213 이 있었는데 MCS 반송명령은 P20 MLA9005 -> 후창고로 내려왔습니다. 이후 매뉴얼오토 전환후 7001이 P20으로 올라갔고 후창고로 반송 내려옴.. 원인은 더 봐야 알 것 같습니다.
March 25, 2025 at 12:20 PM, 김상훈: 그러지요

Chunk 1013:
March 25, 2025 at 12:32 PM, 강기훈: 준공미팅 시 문의주신 분체에이지비 문제점 관련 금일까지 진행현황 공유드립니다. 음극 1. 현상 : 140번 노드에서 1호기 무언정지 발생 - 방안 : 140번 노드 맵수정(3/21, ACS와 슬램맵 불일치 확인하여 미사용 숏컷제거) 양극 1. 현상 : go step timeout 발생 - 방안 : 케이스별 플레이백 확인 후 점검예정 2. 28번 노드에서 AGV Station Docking시 슬립발생 - 방안 : 해당 구간 바닥레벨이 안맞음, AGV PIVOT 속도 조정(3/25) 이후 재발 시 도킹 전 노드 위치 이동하여 레벨 불일치로 인한 슬립 회피 예정 3. 현상 : 에어샤워 이동 중 Lift pos abnormal 발생 - 방안 : 양/음극 동일 PLC 프로그램 사용으로 양극 에어샤워 99번과 음극 99번 CV Docking Node 동일 셋팅값으로 적용되어 포크 정위치 에러 발생한 것으로 확인, 양극 AGV PLC Program 수정 및 횡전계(3/25)

Chunk 1014:
March 25, 2025 at 1:24 PM, 양원석: Scs까지 같이 확인부탁드립니다
March 25, 2025 at 1:26 PM, 조범석: 메일 전달드렸습니다.
March 25, 2025 at 2:36 PM, 강기훈: 분체 양음극 키오스크 확인 완료하였습니다 양극 키오스크 이동 후 기존 장애물감지영역(후면 주행 시 전방 가장 긴구간 감지)으로 원복하여 에이지비 주행 테스트 시 이상없음 확인하였습니다 (작업자 유무에 따른 감지 및 주행 시 카오스크 감지여부 확인완료) 지금부터 앙카고정 작업 후 작업 마무리 하겠습니다

Chunk 1015:
March 25, 2025 at 2:46 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 지난주까지는 1F Stacking (음극, 남측) 생산이 많아 작업자분들이 음극 위주로 티칭점검 및 에러시항 점검을 수행했습니다. 금일부터는 양극도 생산이 많이 여러 에러들이 발생하고 있습니다. 작업자 한분이 대응하면서 조치하고 점검하고 있지만 그럼에도 불구하고 일부 에러가 발생할 수 있으니 전체 점검/조치될때까지만 양해 부탁드립니다. 여러공정에 작업자가 분산되어 있어 시간이 조금 걸릴 수 있습니다.
March 25, 2025 at 2:53 PM, 송광진PM FA장비unit: @전준모 매니저님 agv hmi개선 건은 명일 10시에 진행할게요~
March 25, 2025 at 3:00 PM, 김상훈: Photo

Chunk 1016:
March 25, 2025 at 3:00 PM, 김상훈: 현재 VD 창고 채널 현황입니다. 창고가 60 64를 쓰려고 했는데, 다른 것들이 좀 있네요. 우선 60, 64로 바꾸는 것으로 햇으니, 옮기고 파워를 Max로 올리겠습니다.
March 25, 2025 at 3:05 PM, 최대운: 현재 GF는 에러 등이 적다 보니 명일부터 1F 담당자분을 집중 투입하여 전반적으로 안정화 돨때까지 점검/조치 될 수 있도록 할게요.
March 25, 2025 at 4:56 PM, 김상훈: 현장에서 하고는 있으나, 간섭이 많이 이루어져서, EU_mobile 쪽 채널 변경을 협조해주시면 좋겠습니다.
March 25, 2025 at 4:57 PM, KIM SEYEON [김세연]_FA: 채널을 어떻게 바꾸면 되나요? 회의시에 이야기 부탁드립니다.
March 25, 2025 at 5:00 PM, 김상훈: 시너스텍 VD와 창고가 36 ~ 64, 100 ~ 114번을 사용하니, 이 채널만 비워주면 됩니다.

Chunk 1017:
March 25, 2025 at 5:36 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 1. GF Stacking AGV 양극(5-6라인)은 현재 그룹으로 지정 되어 있습니다. 테스트 시 불합리하여 풀었다가 원 생산 때는 원복한 상태입니다. 2. 그룹화 지정은 ACS내부 프로그러무설정을 수정해야되서 ACS상 화면에서는 못합니다. 3. AGV 1대는(5호기) 현재 RSL 맵 수정이 필요하여 잠시 빼두었으며, 금주 전까지 업데이트하여 투입 예정입니다.
March 25, 2025 at 5:37 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 1F VD 음극 9-2호기 BCr 위치가 애매하게 되어 있어 리딩 페일 났습니다. 우선 제가 위치 조정했습니다. 참고 바랍니다.
March 25, 2025 at 5:41 PM, 정재훈: 내일 미팅 때 물동량 진행 했던 최상의 조건을 알려주세요 4 5 6 생산 준비 목적입니다

Chunk 1018:
March 25, 2025 at 5:50 PM, 김상훈: @연해리 현재 창고에 설치된 AP는 Moxa AP인데, 해당 모델이 140번 까지만 가능하답니다.ㅠㅠ
March 25, 2025 at 6:00 PM, KIM SEYEON [김세연]_FA: 감사합니다
March 25, 2025 at 6:01 PM, 최대운: 네 알겠습니다.
March 25, 2025 at 6:20 PM, 연해리: 네 금일 말씀주신 대로 내일 대역대 변경 부탁드립니다
March 25, 2025 at 6:45 PM, 김상훈: 저희는 다 했습니다
March 26, 2025 at 8:03 AM, 송광진PM FA장비unit: @이승엽 매니저님 금일 오후에 보고가 있어 SAT는 오전시간으로 공지부탁드립니다
March 26, 2025 at 8:31 AM, 강동욱: PM 님 안녕하세요. 오전 10시~, OQC 앞에서 뵙는 것으로 하겠습니다.
March 26, 2025 at 8:33 AM, 송광진PM FA장비unit: 넵

Chunk 1019:
March 26, 2025 at 8:43 AM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 테스트 인력 문제로 일부 전극 테스트 일정을 변경하고자 하는데, 가능여부 확인 바랍니다. 4/1 또는 4/2 - 전극코터 음극 자체 테스트 및 물동량 검증 하루에 진행 - 공보빈 처킹은 저희가 수행하나 창고에 들어가는 공보빈 조치는 고객사 지원 부탁드립니다. 4/3(목) - 전극 분체 자체 점검 4/4(금) - 전극 분체 물동량 검증 이상, 상기 내용 확인 후 회신 바랍니다.
March 26, 2025 at 8:47 AM, 정재훈: 27일에 전극 제조 담당자랑 미팅 후 알려드릴께요
March 26, 2025 at 10:35 AM, 김상훈: @연해리 AP Hidden 처리와 관련하여, 오전에 다시 확인하였으나, WiFi Analyzer로는 Hidden처리 된 걸로 확인됩니다.

Chunk 1020:
March 26, 2025 at 10:36 AM, 김상훈: 휴대폰으로 하는 경우, Cache가 남아있어 보일 수는 있을 것 같아, 현장에서 다른 작업자의 휴대폰으로 확인하였으나, Hidden처리된 것으로 나옵니다.
March 26, 2025 at 10:36 AM, 연해리: 2 photos
March 26, 2025 at 10:39 AM, 김상훈: 제 휴대폰으로도 서치한 적이 많아서, 해본 결과, 위와 같이 나오고, 그래서 Cache. 삭제하고 나면 안 나옵니다. 마찬가지로 EU_mobile도 Hidden 처리가 되었으나, ESSID가 뜨는 걸 보면 Cache 문제로 보입니다.
March 26, 2025 at 1:45 PM, 전준모: @송광진PM FA장비unit 금일 오전 연해리pm, 시너스텍 배현영부장님과 함께 SAT 항목 HMI 개선건 현장확인 완료 했습니다 - 개선 7건 모두 OK 차차 모든 호기 횡전개 하겠습니다

Chunk 1021:
March 26, 2025 at 1:46 PM, 송광진PM FA장비unit: 넵 확인 감사합니다 서보모터 부하율0으로 표기건도 수정 후 횡전개 부탁드릴게요~
March 26, 2025 at 1:47 PM, 전준모: 포함해서 횡전개 하겠습니다
March 26, 2025 at 2:48 PM, KIM SEYEON [김세연]_FA: @최대운 매니저님 혹시 VD AGV 바코드 파일로 메일 송부해 주실수 있을까요?
March 26, 2025 at 2:49 PM, 최대운: 예전에 다 송부드렸습니다. 없으신가요?
March 26, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA: 제가 못 찾겠습니다. 한번 더 보내주시면 잘 저장하겠습니다.
March 26, 2025 at 2:51 PM, 최대운: 네 알겠습니다. 현장인데, 사무실 들어가면 전달 드리겠습니다.

Chunk 1022:
March 26, 2025 at 4:51 PM, 유병일: @최대운 @이연수 매니저님 아래 내용 확인 부탁드립니다. 16:40 음극 롤창고 3211노드에 2호기 대기, 3212 노드에3호기 리트라이 중 3호기가 나와서 턴돌고 에러. -> 16:35~ 2호기, 3호기가 같은 창고로 잡 할당받음

Chunk 1023:
March 26, 2025 at 5:20 PM, 유병일: 유선상 말씀드린내용입니다 @최종건 매니저님 이연수매니저님과 같이 확인 부탁드리겠습니다. 0. 3번창고 리트라이 시 도킹 후 전 노드로 나와서 90도 턴 좌우로 한번씩 진행 후 리트라이 진행. acs목적지 설정 확인 필요. 1. 3212, 3211 노드간 턴 시 범퍼 충돌. 턴 가능 노드인지 확인 필요. 2. 위 시간대에 rtd에서 여유 창고 있음에도 같은 창고로 잡 생성됨 확인필요. 선입선출인지 확인요청 3. 추가로 금일 07:07,07:27 에 음극 프레스와 슬리터로 각각 롤을 보내주는 job이 같은 창고 음극2번창고에서 생성. 선입선출때문인지 확인 요청 4. 같은 포트로 잡 2개 생성시, 창고에서 나오는 롤은 홈스탠드, agv 1개가 버퍼에 롤 놔둿을 시 뒤에 있는 agv는 무언정지 예상됨. 해당 mcs 데스트 인터락 업데이트 일정 확인 필요.

Chunk 1024:
March 26, 2025 at 5:24 PM, 이연수: 3번창고 앞 해당노드의 AGV맵이 변경되어서 ACS도 지금 수정 중입니다. 수정적용하면 턴 간섭은 막을 수 있겠습니다.
March 26, 2025 at 5:37 PM, 이연수: ACS 맵 수정 적용했습니다. 3211노드 STOP금지 노드로 설정했습니다.
March 26, 2025 at 5:42 PM, 최종건: 유선으로 말씀 드린 것 같이 1. 목적지 STK 선정은 STK 적재율로 선정. -> AGV 알람 등으로 반송 지연 시 동일 STK로 입고하는 반송이 2개 이상 생성 가능 2. DEST Interlock 처리는 공정설비 이재기에도 발생 가능한데 Roll ACS Recovery 반송 적용 시 STK 이재기 DEST Interlock과 구분이 필요. - > MCS 상에서는 예외 처리를 위한 하드코딩이 필요하여 상기 케이스 처리를 위해서 ACS 자체적으로 한바퀴 돌고 오도록 처리 필요. 입니다.

Chunk 1025:
March 26, 2025 at 5:45 PM, 이연수: 공정설비 이재기에서는 dest 인터락 없습니다. 창고 이재기에서만 발생..
March 26, 2025 at 5:53 PM, 유병일: 참고로 해당 플레이백 확인해보시면 지금상황에서는 타 창고 잡과 알람은 없었고 코터에서 나온 롤 반송 두개 모두 3번창고로 지정되었습니다
March 26, 2025 at 5:54 PM, 유병일: 리트라이 중 전노드 도착 후 턴 안하는 거는 수정내용에 잇다고 알고 있겠습니다. 수정 시 인폼 주탁드려요
March 26, 2025 at 5:59 PM, 이연수: 아니요 턴 합니다. 턴해도 다른 agv와 간섭 발생하지 않도록 블러킹 설정을 바꿨다는 얘깁니다. 적용은 이미 했습니다
March 26, 2025 at 6:02 PM, 유병일: 근데 리트라이 도중에는 턴을 할 이유가 없지않나요?!

Chunk 1026:
March 26, 2025 at 6:12 PM, 문진영: @송광진PM FA장비unit @정재훈 @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) PM님 미팅 시 공유드렸듯이 명일 13시 30분 음극 슬리터 6라인 매뉴얼 포트에서 SAT 현장 점검 진행하겠습니다.
March 27, 2025 at 6:43 AM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 금일 오전 중 GF Stacking (4-6라인) 그룹화 긴급으로 풀도록 하갰습니다. 시간은 약 10분도 소요 예상입니다. 변경점은 긴급으로 올리겠습니다.
March 27, 2025 at 7:07 AM, KIM SEYEON [김세연]_FA: 네 10시쯤 하시지요
March 27, 2025 at 8:58 AM, 최태영: 금일 서류 미팅은 회의실이 안잡혀서 죄송하지만 10분 정도에 시작하도록 하겠습니다!
March 27, 2025 at 9:01 AM, 이석규 매니저: 네 알겠습니다.

Chunk 1027:
March 27, 2025 at 9:45 AM, 최대운: @KIM SEYEON [김세연]_FA 범퍼 스페어 확인 가능할까요?
March 27, 2025 at 9:57 AM, 유병일: @최대운 매니저님 아래내용 확인 부탁드립니다 1. 리트라이 중 턴 동작 적용 이유와 적용된 노드들 공유 요청. 2. 음극 코터 4호기 1라인 앞 충전 후 125노드에서 포스콘에러 발생. 메뉴얼 go with offset 노드 이동 안됨. 수동으로만 가능. 3. 9호기 125노드 동일 현상 발생. 충전기 출입 전후로 에러 및 agv 병목현상 지속 발생.
March 27, 2025 at 10:01 AM, KIM SEYEON [김세연]_FA: 매니저님 저희 스페어 보유하지 않은 모델이네요
March 27, 2025 at 10:13 AM, Kim Dongju(김동주)_FA: @최대운 매니저님 범퍼 요청하신 이력을 보니 GF VD AGV인데..말씀 하신 범퍼 사이즈가 큰데..혹시 사양이 맞는지 확인부탁드립니다.

Chunk 1028:
March 27, 2025 at 10:14 AM, 최대운: 네 다시 한번 확인하겠습니다
March 27, 2025 at 11:33 AM, 최대운: This message was deleted.

Chunk 1029:
March 27, 2025 at 11:44 AM, 강기훈: 전극 GF ROLL AGV 문의주신 사항에 대해 공유 드립니다. 1. 리트라이 중 턴 동작 적용 이유와 적용된 노드들 공유 요청 - POS CONT POS 조치작업을 위해 노드 이동하여 턴동작 진행 - 3210, 3212노드 적용(03/20) 및 현재 포스콘트 에러는 clear됨 2. 음극 코터 4호기 1라인 앞 충전 후 125노드에서 포스콘에러 발생. 메뉴얼 go with offset 노드 이동 안됨. 수동으로만 가능. - 노드 위치 수정하여 포스콘에러 clear 및 모니터링 진행 중 (03/27) 3. 9호기 125노드 동일 현상 발생. 충전기 출입 전후로 에러 및 agv 병목현상 지속 발생. - 노드 위치 수정하여 포스콘에러 clear 및 모니터링 진행 중 (03/27) - 병목현상 개선 관련 창고룸 내부 AGV 대기 금지구역(3208번) 및 충전기 주변 노드 대기 금지구역(126번) 설정

Chunk 1030:
March 27, 2025 at 11:57 AM, 강기훈: 피엠님, 하기 사진 참조 부탁드리며, 실측으로 작성한 것으로 오차는 10mm 내외로 있을 것 같습니다 도움주셔서 감사합니다
March 27, 2025 at 11:57 AM, 강기훈: Photo
March 27, 2025 at 12:04 PM, 유병일: @강기훈 매니저님 턴 적용 노드 턴할때 사방으로 간섭 유무까지 확인 부탁드리겠습니다
March 27, 2025 at 12:11 PM, Kim Dongju(김동주)_FA: 매니저님 범퍼 확인해보니 spare 재고가 없습니다.
March 27, 2025 at 12:12 PM, 강기훈: 네, 확인 감사합니다 자체 입고일정 확인하겠습니다
March 27, 2025 at 1:22 PM, 송광진PM FA장비unit: @KIM SEYEON [김세연]_FA pm님 법인에서 참관은 어떤분이 하실까요
March 27, 2025 at 1:38 PM, 송광진PM FA장비unit: 먼저 진행하겠습니다

Chunk 1031:
March 27, 2025 at 1:45 PM, KIM SEYEON [김세연]_FA: 네
March 27, 2025 at 2:20 PM, 유병일: @강기훈 매니저님 음극코터 창고2번에 15호기 도킹 후 stale true 상태로 변하면서 ldud step timeout 에러 발생했습니다. 통신쪽 케이블 확인 부탁드립니다
March 27, 2025 at 3:30 PM, 유병일: @강기훈 매니저님 13:33 음극코터 창고에 25호기 롤 건네주고 이재기가 버퍼로 옮기는도중 리트라이 에러발생. 요건데 창고는 기억이 잘안나는데 2아니면 3창고 엿습니다
March 27, 2025 at 3:31 PM, 유병일: 이렇게 2개 확인 부탁드려요!

Chunk 1032:
March 27, 2025 at 3:57 PM, 강기훈: 문의주신 내용 1차 정리하여 공유 드립니다 이후 추가적으로 점검 후 조치내용 공유 드리겠습니다 1. 음극 롤에이지비 15호기 14시 11분경 창고이재기 2번에서 발생된 현상 - AGV ULD중 통신끊김 발생으로 점검 예정 - 통신 자체 연결 후 LD/UD STEP TIMEOVER 발생 - 해당 에러는 이재기에서 보빈 떠갔으나 AGV V-Block Sensor 오감지로 발생된 것으로 확인되어 센서 점검 예정 2. 음극 롤에이지비 25호기 13시 33분경 창고이재기 2번에 ULD중 이미 이재기가 보빈 떠갔으나 AGV에서 RETRY 관련 ACS EMERGENCY 발생된 현상 - 해당 호기 해당 구간 이전/이후 이적재 시 미발생하였고 단발성으로 ACS 로그 분석필요하여 명일 국내에 요청예정
March 27, 2025 at 4:32 PM, 김상훈: Photo
March 27, 2025 at 4:32 PM, 김상훈: Photo

Chunk 1033:
March 27, 2025 at 4:32 PM, 김상훈: 분체에서 WiFi Analyzer 로 캡춰한 상태입니다. EU_mobile에서 아직 2.4GHz를 점유하고 있습니다. 전달 부탁드립니다.
March 27, 2025 at 4:44 PM, KIM SEYEON [김세연]_FA: 매니저님 어제 전달드린 메일루프를 통해 빠르게 커뮤니케이션 진행하시지요. 같은 SK C&C이니
March 27, 2025 at 4:46 PM, 김상훈: 했습니다
March 27, 2025 at 4:54 PM, 김상훈: 같은 씨앤씨이긴 하나, 제가 업무지시할 권한이 없습니다. 이 부분은 협조를 요청드립니다.
March 27, 2025 at 4:56 PM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 27, 2025 at 4:57 PM, KIM SEYEON [김세연]_FA: @이승엽 매니저님 금일 랩업회의는 17시 행정동GF입니다.

Chunk 1034:
March 27, 2025 at 5:23 PM, 김상훈: Photo
March 27, 2025 at 5:24 PM, 김상훈: 1F NC 음극입니다 EU_mobile AP 중에서 채널본딩해서 배불뚝이가 있는 것 같습니다
March 27, 2025 at 6:10 PM, 유병일: @이연수 @최종건 매니저님 해당 내용 관련해서 업데이트 일정 수립되면 공유 부탁드립니다
March 28, 2025 at 8:15 AM, 최대운: @KIM SEYEON [김세연]_FA 현재 시점 GF VD 양극 후창고에 대략 177개가 있습니다. 이렇게 되면 못하는건지? 매번 확인 하기가 쉽지 않겠는데요?
March 28, 2025 at 8:15 AM, 최대운: Photo
March 28, 2025 at 8:41 AM, 송광진PM FA장비unit: 저희 음극테스트라 음극꺼는 199개라 특이사항 없을거같아요
March 28, 2025 at 8:41 AM, 송광진PM FA장비unit: 물동량이 아니라 티칭점검 건인가요?

Chunk 1035:
March 28, 2025 at 8:46 AM, 최대운: 티칭점검 양극입니다. 전일 메일 송부주셔서(김세연피엠님) 지금 후창고 양으로는 안해야되는 상황인겁니다.
March 28, 2025 at 8:52 AM, KIM SEYEON [김세연]_FA: 하는것으로 이야기하겠습니다. 우선 준비해주세요.
March 28, 2025 at 8:53 AM, 최대운: 네 알겠습니다.
March 28, 2025 at 9:10 AM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 4/1 또는 4/2일 전극 코터 음극 생산이 없으면 테스트 및 물동량 검증 진행 요청 드립니다. 전일 확인 해주신다고 하셨는데, 확인 되셨는지요?
March 28, 2025 at 9:16 AM, 정재훈: 네 생산 공유 받은거에는 계획 없는데 오늘 오전 미팅때 확인 후 알려드릴께요

Chunk 1036:
March 28, 2025 at 10:46 AM, 최대운: @송광진PM FA장비unit @유병일 티칭점검으로 6라인 생산에 지장 안주기 위해 일부 매뉴얼로 공급되니 에러 협의시 참고 바랍니다.
March 28, 2025 at 11:54 AM, 정재훈: 생산 없는거 확인했어요 진행하세요
March 28, 2025 at 11:59 AM, 최대운: 4/1 또는 2일 둘 중 아무때나 해도 된다는 말씀이시죠?
March 28, 2025 at 12:02 PM, 최대운: @KIM SEYEON [김세연]_FA 메일로 요청드렸듯이 하루만 진행하고자 합니다. 공보빈 이재기 처킹은 자체적으로 진행하고 창고에 들어가는 공보빈 처리만 부탁드립니다.
March 28, 2025 at 12:53 PM, 최대운: @KIM SEYEON [김세연]_FA @정재훈 현재 전극 창고 음극 바닥이 미끄러워 슬립이 발생하는 구간이 있어 창고 2곳 정도만 사포재질의 논슬립 테이프를 바닥에 부착하여 테스트 진행해도될까요?

Chunk 1037:
March 28, 2025 at 1:47 PM, KIM SEYEON [김세연]_FA: 네 해보시지요
March 28, 2025 at 1:48 PM, KIM SEYEON [김세연]_FA: 공보빈처리도 부탁드립니다. 누가 하든 해야 하는거라.. 법인 인력도 바쁩니다.
March 28, 2025 at 2:21 PM, 최대운: 모두 인원이 부족하여 retry테스트 때처럼 창고 이재기가 움직이기 시작하면 창고하고 AGV를 매뉴알로 돌려서 공보빈 제거 하고 start 해도 도 될까요? 그럼 창고로 안들어가고 검증시 바로 공보빈 제거를 할 수 있습니다. (로그파일은 AGV가 전달후 완료 됐을경우 이재기가 움직이기 때문에 로그파일은 뽑는데 문제 없습니다. )

Chunk 1038:
March 30, 2025 at 4:52 AM, Baek Hojong(백호종)FA: @이철훈_CIM_SKCC 전극 써머타임 시간변경 확인 분체 1F 양음극 AGV 변경무 RTV 적용 ok 컨베어 적용 ok 분체 GF 양음극 RTV 적용 ok 컨베어 적용 ok 크레인 기상반 변경무 지상반 변경무 코터양극 1호기 이재기 ok 2호기 이재기 ok 3호기 이재기 ok 4호기 이재기 ok 코터 AGV 11 변경무 코터 AGV 04 변경무 코터 AGV 03 ok 코터음극 1호기 이재기 ok 2호기 이재기 ok 3호기 이재기 ok 4호기 이재기 ok 코터 AGV 04 변경무 코터 AGV 02 ok 코터 AGV 03 변경무 코터 AGV 09 OK 포일 AGV 02 ok 포일 AGV 03 변경무 포일창고 이재기 ok 크레인 변경무 롤창고 양음극 전호기 이재기 ok 크레인 변경무 프레스 양극 AGV 21 변경무 이재기 ok 프레스 음극 AGV 19 25 변경무 이재기 ok 슬리터 양음극 이재기 UW ok 이재기 RW 변경무

Chunk 1039:
March 30, 2025 at 11:23 AM, 이철훈_CIM_SKCC: 네 조사 감사드립니다 각 영역별 전달하여 확인될수 있도록 하겠습니다
March 30, 2025 at 2:51 PM, 김주연: @이철훈_CIM_SKCC @조범석 매니저님, 써머타임 적용되지않아서 발생하는 이슈있는지 확인 후 메일로 공유 부탁드립니다.

Chunk 1040:
March 31, 2025 at 4:22 AM, Baek Hojong(백호종)FA: @이철훈_CIM_SKCC 매니져님 조립 1F GF 써머타임 적용여부 설비 전수 확인해서 보내드리니 참고하셔요 조립 써머타임 설비 적용 전수확인 1F 양극 1F 장폭 룰창고 크레인 변경무 양극 1F 노칭 AGV ok 다관절포트 ok 릴창고컨베어 ok 음극 1F 장폭 롤창고 크레인 ok 음극 1F 노칭 AGV ok 다관절포트 C0PVA40_R01 변경무 릴창고컨베어 ok 양극 1F VD 전창고 포트 ok 양극 1F VD 전창고 크레인 변경무 음극 1F VD 전창고 포트 ok 음극 1F VD 전창고 크레인 변경무 양극 1F VD AGV 06 07 변경무 음극 1F VD AGV 12 16 변경무 양극 1F VD 후창고 포트 ok 양극 1F VD 후창고 크레인 변경무 양극 1F VD 회수물류 컨베어 변경무 음극 1F VD 후창고 포트 ok 음극 1F VD 후창고 크레인 변경무 음극 1F VD 회수물류 컨베어 변경무 양극 스태킹 순환물류 컨베어 변경무 양극 스태킹

Chunk 1041:
March 31, 2025 at 8:43 AM, KIM SEYEON [김세연]_FA: @최태영 @이승엽 매니저님 금일 전극 알람미팅은 9시20분부터 가능할까요?
March 31, 2025 at 9:19 AM, 유병일: @KIM SEYEON [김세연]_FA피엠님 3/31 오늘 분체 양극 agv 자체test, 4/4에 양극 물동량 test 진행하기로했으니 참고 부탁드립니다.
March 31, 2025 at 9:19 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다.
March 31, 2025 at 9:23 AM, 최태영: 넵 접속하겟습니다
March 31, 2025 at 9:24 AM, KIM SEYEON [김세연]_FA: @강기훈 매니저님 금일 분체 양극 물동량도 보는건가요?

Chunk 1042:
March 31, 2025 at 9:25 AM, 문진영: @KIM SEYEON [김세연]_FA PM님 메일로 요청하신 VD창고 조그 인터락 관련 미팅 금일 10시에 요청하셨는데 알람 미팅 끝나는데로 행정동으로 찾아 뵙도록 하겠습니다.
March 31, 2025 at 9:55 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다
March 31, 2025 at 10:19 AM, 강기훈: 금일은 자체테스트로 에이지비 상태점검 및 자체 이적재 반송 위주로 진행 예정입니다
March 31, 2025 at 10:34 AM, KIM SEYEON [김세연]_FA: 네 알겠습니다. 아까 알람미팅시도 말씀드렸지만 스테이션 안착불량도 같이 봐주시면 좋겠습니다.
March 31, 2025 at 6:03 PM, 이승엽: @KIM SEYEON [김세연]_FA Reel창고 케이블 교체 작업 하려하는데 6시부터 바로 진행하면 될까요??

Chunk 1043:
March 31, 2025 at 6:03 PM, 이승엽: 에스엠코어 비가동 요청 작업 개시 가능 여부 확인 입니다
March 31, 2025 at 6:04 PM, 강기훈: @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 금일 준공미팅 시 공유주신 GF NC 양음극 AGV 전호기 명일 예상하시는 투입시점 있으시면 공유 부탁드립니다
March 31, 2025 at 6:07 PM, KIM SEYEON [김세연]_FA: 확인중입니다 조금만 기다려주십시오
March 31, 2025 at 6:08 PM, 이승엽: 네 감사합니다.
March 31, 2025 at 7:19 PM, 유병일: @Baek Hojong(백호종)FA 피엠님 오늘 야간에 양극코터 3라인 앞에 있는 음극포일공보빈에 fa test 자재 하나만 써 붙여주시면 감사드리겠습니다! @최대운 매니저님 내일 오전에 양극 코터 3라인 앞에서 가져가시면됩니다 내일 가져가시고 수량만 공유부탁드려요

Chunk 1044:
March 31, 2025 at 7:19 PM, 최대운: 네 알겠습니다. 감사합니다.
March 31, 2025 at 7:20 PM, Baek Hojong(백호종)FA: 네 알겠습니다 총7개정도 필요하다 하셨죠 피엥님

Chunk 1045:
March 31, 2025 at 7:21 PM, 유병일: 넵 최대운매니저님께서 현재 3개 보유하고 있다고 해서 4~5개 정도 확보 부탁드려요! April 1, 2025 at 3:14 AM April 1, 2025 at 3:14 AM, Baek Hojong(백호종)FA : @유병일 @최대운 포일공보빈 테스트 자재 양극 3라인 앞 파레트에 넉넉하게 10개 준비했습니다 FA TEST라고 표시해두었습니다 April 1, 2025 at 8:45 AM, 최대운 : @유병일 코타 음극 3,4라인쪽 자재, 드럼통 정리가 필요합니다. 대차는 대충 이동 시켜 놓겠습니다. April 1, 2025 at 9:03 AM, 최태영 : 금일 조립 알람 데일리 미팅 리마인드 드립니다 April 1, 2025 at 9:35 AM, 김주연 : @이철훈_CIM_SKCC @이연수 매니저님 VD미건조 이력확인 필요하여 메일드렸습니다. 금일까지 확인 부탁드립니다 April 1, 2025 at 9:38 AM, 이철훈_CIM_SKCC : 메일 안왔는데요? April 1, 2025 at 9:42 AM, 김주연 : temp battery로 메일 드렸는데 아직 안왔나요? April 1, 2025 at 9:56 AM, 이철훈_CIM_SKCC : 확인해보겠습니다. April 1, 2025 at 10:21 AM, 최태영 : 알람 자료 업데이트 드렸습니다 April 1, 2025 at 10:57 AM, 최태영 : 스태킹 내용 추가해서 재송부드렸습니다 April 1, 2025 at 11:11 AM, 유병일 : @이연수 매니저님 @최종건 매니저님 금일 음극 코터 agv test 중에 저번에 말씀드린 창고 아웃+창고 인 2개 현상이 나오고 있습니다. 데스트 인터락 적용 일정 확인 요청드립니다 April 1, 2025 at 11:14 AM, 최종건 : 금주 중에 테스트하는 걸로 이야기했습니다. @이연수 일정 확인 부탁 드립니다. April 1, 2025 at 11:14 AM, 이연수 : 금주 내로 MCS와 테스트 일정 잡겠습니다. @정연동 @최종건 April 1, 2025 at 11:15 AM, 이연수 : 목요일 가능한지 AGV 확인해볼게요 April 1, 2025 at 11:19 AM, 이연수 : 목요일 09시 테스트 가능합니다. April 1, 2025 at 11:37 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 전극코터에서 창고 들어가는 지점(1번창고) AGV 들어가면 뒤에 따라오는 AGV정체가 발생하여, 창고 내부와 AGV 이동 구간 사이 노드를 하나 더 만들어서 AGV 교횡시에 문제 없도록 하고자 합니다. 맵 자체를 변경하는곳은 아니고 중간에 노드하나 추가 되는 상황입니다. 급하게 진행하다보니 변경점 관리 작성 없이 진행하겠습니다. ACS는 맵보완 후 적용 예정입니다. 참고 바랍니다. 테스트는 오후부터 다시 진행하겠습니다. April 1, 2025 at 12:51 PM, 이철훈_CIM_SKCC : @김주연 문의 방화벽 해제신청관련 1년이 지나 재신청 필요한데 결재라인좀 알려 주세요 김주연-권기홍-윤순영-조수형 인지요? April 1, 2025 at 12:54 PM, 김주연 : 윤순영pm님만 제외하시먄 됩니다. April 1, 2025 at 1:07 PM, 이철훈_CIM_SKCC : 신청했습니다. cim app ui 접속이 안되는 상태라 빠른 결재 부탁 드립니다. April 1, 2025 at 1:31 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @유병일 포일 1라인 UW 3번째인데, 보빈리 딸려가서 테스트에는 배제 하겠습니다. 수동 조치에 한계가 있습니다. 다른 라인도 문제 발생 시 공유 드리겠습니다. April 1, 2025 at 1:33 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 1라인 딸려가는게 없어도 버퍼에 올려놓을때 한쪽만 걸리더라구요 EQ설비와 저희설비와 원점 잘 맞았는지 EQ설비가 원점 많이 바꾼건지 도 문제였습니닺 우선 그렇게 진행 하세요. April 1, 2025 at 1:34 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 지금 ACS 보고있는데 몇번노드가 추가된건가요? April 1, 2025 at 1:36 PM, 최대운 : 음극 창고 포트에 보시면 중간에 하나 생겼습니다. 예를들어) 1번창고 3207->3201 변경 후 3207->3424->3201 기존 리트라이시 3201까지 나오던 AGV가 덜 나와서 3424까지만 나오기 때문에 3201 이덩 가능합니다. April 1, 2025 at 1:41 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 좋은 방안 같은데 금일 테스트 후 양극도 횡전개 필요할지 검토 부탁드립니다. April 1, 2025 at 1:45 PM, 최대운 : 양극도 해볼려고 검토 했었는데, 공간이 부족하여 중간 노드 만들더라도 주행이 불가한 상황입니다. 나중에 현장에서 보시면 이해 가능하실겁니다. April 1, 2025 at 2:00 PM, KIM SEYEON [김세연]_FA : 그럼 양극은 뒤에 밀리는 현상이 없나요? .. April 1, 2025 at 2:08 PM, 최대운 : 음극은 코터앞에서 바로 창고라서 코터 대기가 있는데, 양극은 코터와 창고 사이 공간이 있어 크게 문제가 없어 보입니다. April 1, 2025 at 2:16 PM, KIM SEYEON [김세연]_FA : Photo April 1, 2025 at 2:16 PM, KIM SEYEON [김세연]_FA : @김상훈 매니저님 유럽DT에서는 오전에 AP관련 5G 2.4G 조정을 마쳤다고 합니다. April 1, 2025 at 2:17 PM, KIM SEYEON [김세연]_FA : 최적화가 필요해보입니다. April 1, 2025 at 2:19 PM, 최대운 : @유병일 포일 UW 설비 확인이 필요한 상황이라 PNT 담당자분 현장에서 미팅할수 있게 어레인지 부탁드립니다. April 1, 2025 at 2:34 PM, 유병일 : @심찬울 매니저님 3시에 음극 코터 2라인에서 만나기로했습니다! April 1, 2025 at 4:38 PM, 최대운 : 1라인 센터는 확인 했으며, 다시한번 딸려 오는지 확인코자 테스트에 반영 했습니다. April 1, 2025 at 4:54 PM, 김주연 : @이철훈_CIM_SKCC 방화벽은 보안 전협조 후에 전자결재가 올라와서요, 올라오면 바로 승인하겟습니다 April 1, 2025 at 5:41 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 코터 딸려가는 현상으로 data가 누락되어 이재기 자체에서 data 생성 했을때, full/empty정보를 넣을수 없어서, mcs 반송이 안생겨서 일부 UW(포일) acs 메뉴얼로 명령을 주었습니다. 이점 참고 바랍니다. April 1, 2025 at 6:05 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 금일 오전에는 리트라이 및 창고쪽 라인 불합리로 라인 개선(창고포트쪽 노드 추가) 작업 하였습니다. 오후에는 일부 포일이 라인에 정위치 맞지않아 티칭 점검에 다소 시간을 할애 하였습니다. 모두 정상으로 작업한 시점이 약 3시 부터이며, 기존 창고 앞 라인 문제로 버틀넥 걸리는 부분을 오후부터는 어느정도 해소되어 운영 되는걸 확인 하였습니다. 물동량 검증 테스트는 금일 4시간 정도 수행하여 7시 정도까지 진행하겠습니다. 그 이후는 일부 포일 자재등 정리하도록 하겠습니다. 그 시간 일부 창고에 들어가 있는 테스트 자재 뺄수 있는 만큼 빼도록 하겠습니다. April 1, 2025 at 7:32 PM, 최대운 : Test는 종료 하면서 자재 정리 하겠습니다. April 1, 2025 at 7:51 PM, 유병일 : 넵 자재는 내일 오전까지만 원래 자리로 반납 부탁드리겠습니다. 롤공보빈 2plt, 사용한 포일 공보빈 April 1, 2025 at 8:16 PM, 최대운 : @KIM SEYEON [김세연]_FA 금일 롤테스트한 공보빈은 약 120보빈 음극창고에 들어 갔으며, 그 중 지금까지 60개 정도는 출고하여 원위치 하였습니다. 남은 40개 정도(아이디:TEST 시작함) 지난번 요청 드렸듯이 출고 처리 부탁드립니다. 포일은 창고에 테스트 자재 2개 남아 있으며, 나머지 8개는 양극 3라인 원래 위치에 두었습니다. April 1, 2025 at 9:02 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 GF 노칭 음극 금주 금요일 물동량 검증 진행할 수 있도록 일정 협의 부탁드립니다. April 1, 2025 at 10:22 PM, Baek Hojong(백호종)FA : @KIM SEYEON [김세연]_FA 수동출고 완료했고 코터 및 프레스 설비로 가져다 줬습니다 April 2, 2025 at 8:15 AM April 2, 2025 at 8:15 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 1F 노칭에서 AGV 15 16 17호기 신규투입해서 티칭하는것 올려주셨는데, 해당작업 완료되었나요? April 2, 2025 at 8:15 AM, KIM SEYEON [김세연]_FA : 어제 LD UD 알람이 많이나서 문의드립니다. April 2, 2025 at 8:33 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 GF 노칭 전호기 투입하려고 합니다. 문제있는 호기가 있을까요? April 2, 2025 at 8:55 AM, 최대운 : 모두 투입하셔도 문제 없습니다. April 2, 2025 at 8:56 AM, 최대운 : 저희도 확인 결과 EQ설비랑 난 에러로 EQ설비에서 에러가 났거나 했을겁니다. 1층에 있을때 EQ설비 잠시 정비하는동안 LD UD나는 경우 수시로 확인도 했었습니다. April 2, 2025 at 9:03 AM, 이승엽 : @KIM SEYEON [김세연]_FA PM님. 지난 번 논의드린 바와 깉이 VD GF 전창고 이중입고 브라켓 작업 금일 진행하고자 하는데 확인 부탁 드립니다 April 2, 2025 at 9:06 AM, 이승엽 : 월요일 회의 시 금일 전창고 쪽은 작업이 가능하다고 하셔서 현재 엠스엠코어에서 작업 대기 중입니다. April 2, 2025 at 9:10 AM, 최대운 : @방혁 PM(Bang.Hyuk) FA 저희쪽 담당자분이 GF 노칭 전호기 투입 예정입니다. April 2, 2025 at 9:19 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 2, 2025 at 9:20 AM, 방혁 PM(Bang.Hyuk) FA : 감사합니다 April 2, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA : 매니저님 죄송합니다만 금일 R@R준비로 작업이 불가능하다고 합니다. April 2, 2025 at 9:23 AM, KIM SEYEON [김세연]_FA : 제가 차주로 다시 잡아놓겠습니다. April 2, 2025 at 9:44 AM, 최대운 : @송광진PM FA장비unit @유병일 가능하도록 확인 좀 부탁드립니다. April 2, 2025 at 9:46 AM, 송광진PM FA장비unit : 네 오전중 물량보고 제조에 의견 계속 전달할게요 April 2, 2025 at 10:29 AM, 최대운 : 투입 완료 했습니다. April 2, 2025 at 12:40 PM, 유병일 : @강기훈 매니자님 양극 롤창고 앞 2251 노드 장애물 감지 센서 울려서 병목 현상 발생합니다 해당 노드 센서 범위 확인 부탁드려요 April 2, 2025 at 1:48 PM, KIM SEYEON [김세연]_FA : Photo April 2, 2025 at 1:48 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 혹시 코터 및 롤창고 리트라이 관련 AGV개선 진행이 있을까요? April 2, 2025 at 1:49 PM, KIM SEYEON [김세연]_FA : Photo April 2, 2025 at 1:49 PM, 최대운 : 문제 있는지 확인 요청하겠습니다. April 2, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA invited 김지수PM(Gyuri)_FA. April 2, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA : 네 현장 오시는 분이 저희 @김지수PM(Gyuri)_FA 피엠님에게 연락 부탁드립니다. April 2, 2025 at 4:32 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 1. 금일 전극분체 물동량 검증을 위해 테스트 중에 있습니다. 테스트 화물이 실화물과 다르다 보니 일부 에러 등이 발생합니다. (포크 범퍼 센서 알람, 포크 Pallet 걸려 휠이 떠서 주행이 안됨 등) - 에러 이슈 회의 시 참고 바랍니다. - 물동량 검증 시 일부 수동전환하고, 수동 반송으로 진행 됩니다. (현장 확인 함) 2. 비효율적 업무 수행을 일부 개선하기 워해 포트와 포트사이 양방향 적용하여 테스트 예정입니다. 3. 가능한 금일 테스트 준비하고, 시간 부족시 명일 오전까지 추가 보완 될수 있습니다. 물동량 검증은 그 이후에 진행하도록 하겠습니다. 생산으로 미루어질 수 있으니 원래대로 명일 물동량 검증을 진행하도록 하겠습니다. (코터처럼 늦어지더라고 명일 완료 예정) April 3, 2025 at 9:36 AM April 3, 2025 at 9:36 AM, 송광진PM FA장비unit : @최대운 명일 gf nc음극 물동량 테스트 일정으로 제조 요청드렸습니다. 재고물량도 아침부터 늘고있어 어후 중 특이사항있는지 공유드릴게요 April 3, 2025 at 9:44 AM, 최대운 : 네 감사합니다~ April 3, 2025 at 9:47 AM, 김영재 : @이승엽 매니저님, 저희팀 권진원 PM께서 AGV simulation 관련 정보 요청 메일을 드렸을텐데, 확인 부탁드리며 필요시 미팅 arrange까지 부탁드립니다. April 3, 2025 at 9:48 AM, 김영재 : @송광진PM FA장비unit @김희용 April 3, 2025 at 9:51 AM, KIM SEYEON [김세연]_FA : 2 photos April 3, 2025 at 9:52 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 @이철훈_CIM_SKCC 매니저님 상기 건 관련 금일 16시까지 레포트 부탁드립니다. 히스토리와 원인 조치사항 위주로 한장 요약 부탁드립니다. April 3, 2025 at 9:53 AM, KIM SEYEON [김세연]_FA : 조립 가동율에 문제가 있었어서 요청드립니다. April 3, 2025 at 10:17 AM, 이승엽 : 메일은. 수신했으며, 관련하여 확인 후 회신 드릴.수 있도록 하겠습니다 April 3, 2025 at 10:21 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 전극 분체 음극 물동량 검증 진행하겠습니다. 일부 테스트자재 불합리 문제로 수동 개입이 불가피 한상황이며, UR상황시 수동 개입 시 라인이 표시 안될수 있어 UR 시간대별 라인 정보는 수동 기입예정입니다. (ACS 로그상에는 UR 시간대별 총량으로 표시) 4-5시간 정도 예상되며, 그 이후 생산으로 테스트 자재 정리 예정입니다. April 3, 2025 at 10:45 AM, 이연수 : 금일 롤창고 데스트 인터락 적용 완료했습니다. 출고화물 1개 + 입고화물 2개 상황이면 자동으로 대체반송 받아서 다른창고로 입고 시킵니다. @송광진PM FA장비unit @KIM SEYEON [김세연]_FA April 3, 2025 at 1:20 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공 데일리회의 전에 sk c&c쪽 검토된 내용들 회신 주셔야 회의가 의미 있을것 같습니다. 자료 공유 부탁드립니다. April 3, 2025 at 1:20 PM, 이승엽 : 네 정리 중입니다 April 3, 2025 at 2:05 PM, 최대운 : @KIM SEYEON [김세연]_FA @송광진PM FA장비unit @유병일 물동량 검증 이후 테스트 자재를 음극 창고 포트 옆 공간에 두어도 되나요? 추후 양극 테스트 자재로 사용은 해야될것 같습니다. 자재 보관할 위치 알려주시면 감사하겠습니다. April 3, 2025 at 2:18 PM, 송광진PM FA장비unit : 에어샤워룸 옆 말씀주시는거죠? 거기에 보관하고 테스트용 팔레트 부착 부탁드려요 April 3, 2025 at 2:19 PM, 최대운 : 네 알겠습니다. April 3, 2025 at 3:42 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @유병일 @이승천 금일 전극 분체 음극 테스트는 종료 하겠습니다. (5시간 수행) 테스트 자재는 우선 창고 앞 구석에 비치하여 테스트 자재라고 적어 두겠습니다. April 3, 2025 at 6:21 PM, KIM SEYEON [김세연]_FA : Photo April 3, 2025 at 6:21 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 매거진 전도 발생하였습니다. April 3, 2025 at 6:23 PM, 이승엽 : 시너스텍 담당자 현장 들어갔습니다 April 3, 2025 at 6:25 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 3, 2025 at 6:25 PM, 이승엽 : 1차 원인 확인 후 일단 해당 AGV 라인아웃하고 원인 확인해 보겠습니다 April 3, 2025 at 6:26 PM, 최대운 : 현장에 담당자 확인하고 있습니다. 우선 라인 아웃하고 원인 확인 하겠습니다. April 3, 2025 at 6:28 PM, KIM SEYEON [김세연]_FA : Photo April 3, 2025 at 6:29 PM, KIM SEYEON [김세연]_FA : CA 4-3과 AGV#1호기도 안착불량 발생했습니다. April 3, 2025 at 7:09 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 AGV#1번과 #8번은 라인아웃후 명일 재티칭 부탁드립니다. April 3, 2025 at 7:35 PM, 최대운 : 1호기는 VD 인가요? 동일 노칭인가요? 8호기는 재티칭 하겠습니다. April 3, 2025 at 7:46 PM, 이주봉PM LEE JUBONG(FA) : 둘다 노칭이에여 April 3, 2025 at 7:53 PM, 최대운 : 네 알겠습니다. April 3, 2025 at 9:14 PM, KIM SEYEON [김세연]_FA : Photo April 3, 2025 at 9:15 PM, KIM SEYEON [김세연]_FA : 매니저님 노칭 양극 2호기도 명일 부탁드립니다. April 4, 2025 at 6:54 AM April 4, 2025 at 6:54 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 4라인 금일부터 첫가동인데 스테이션 램프가 켜지지 않는곳이 있다고 합니다. 업체로부터 확인 부탁드립니다. April 4, 2025 at 6:54 AM, KIM SEYEON [김세연]_FA : Photo April 4, 2025 at 7:00 AM, 문진영 : 네! 출근하는데로 현장 확인하겠습니다. April 4, 2025 at 7:01 AM, KIM SEYEON [김세연]_FA : 감사합니다 April 4, 2025 at 7:17 AM, Jun(정우준)_SKOH FA : 매니저님 해당 건, 실제 LR은 올라가서, 반송은 되는데, 경광등이 안나와서 오퍼레이터들이 이것 저것 버튼 막 누르고 있는 상황입니다. 참고바랍니다. April 4, 2025 at 8:30 AM, 유병일 : @이연수 매니저님 @문진영 매니저님 데스트 인터락 적용 후에 발생인지 기존 로직인지 창고 출고롤 1개는 홈스탠드 위치, 입고롤 1개 버퍼에 위치 한 상태에서 agv가 홈스탠드에 있는 롤을 받고 바로 나가지 않고 버퍼에 있는 롤을 렉에 넣을 때까지 대기하는 현상이 있었는데 해당 내용 확인 및 금일 모니터링 부탁드리겠습니다 April 4, 2025 at 8:34 AM, 이연수 : 데스트 인터락 발생조건이 아닙니다. 주변에 알람발생한 AGV가 있어서 블러킹 상황이었을 가능성 있는데 시간을 알 수 있을까요? 계속 지켜보겠습니다. April 4, 2025 at 8:39 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 GF Stacking 음극 지난번부터 생산 때문에 미루어졌는데, 오늘도 어렵다고 합니다. 저희들 인원이 안되어 오늘 아니면 쉽지 않은 상황입니다. April 4, 2025 at 8:55 AM, 송광진PM FA장비unit : 제조랑 테스트시간 조정건으로 협의중입니다. 조율되는대로 공유드릴게요 April 4, 2025 at 9:10 AM, 유병일 : 매니저님 4/3 11:41~ 였는데 방금 플레이백 보니 정상 인터락 상황 확인했습니다! @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA 피엠님 참고 부탁드립니다! April 4, 2025 at 9:24 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @유병일 전일 GF 코터 양극 추가로 1대 투입할려고 하니 AUTO가 안되어 확인 결과 RSL이 대차로 찍혀서 고장 난거 같습니다. (찍힌 자국이 남아 있습니다. ) AGV 8호기이며, 의사 결정 부탁드립니다. 1. RSL 여유분 주시면 교체해서 투입할 수 있게 해드리겠습니다. 2. 현재 6대 중 3대 운영 중입니다. 별도로 나중에 투입하시겠다고 하시면 그대로 두겠습니다. 3. 전극 프레스에서 코터로 이동 언제 할까요? - 양극: 2대 이동 필요 - 음극: 1대 이동 필요 April 4, 2025 at 9:31 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 전일도 전극 코터 양극 심각하게 문제 있다고 하여 현장 확인 결과 RW 2곳을 수행하는데, AGV를 2대만 투입을 했더라구요~추가적으로 투입만 하면 문제가 되는 상황은 아니였습니다. 혹시 몰라 어제도 2대 더 투입했는데, 현재는 1대 제외 시켰네요~ 참고 바랍니다. April 4, 2025 at 9:56 AM, KIM SEYEON [김세연]_FA : 1. RSL 스페어 저희가 드리겠습니다. 교체 부탁드립니다. 2. 5대 운영하려고 합니다. 3. 전극 프레스에서 코터로는 차주에 이동 부탁드립니다. April 4, 2025 at 9:57 AM, KIM SEYEON [김세연]_FA : 1대 제외 이유 확인해보겠습니다 April 4, 2025 at 10:17 AM, 최대운 : @유병일 @배병민 (Bae Byoungmin) 코터 전용 호기 공유 드립니다. 양극 코터: 2,3,4,8,11,19 음극 코터: 2 3 4 9 12 16 20 호기 입니다. April 4, 2025 at 10:21 AM, 배병민 (Bae Byoungmin) : 감사합니다 April 4, 2025 at 10:53 AM, 문진영 : 해당 건 현장 확인했고 스테이션 P01과 P02 백색 램프쪽만 IO가 양, 음이 바뀌어 있어 수정했고 전 개소 IO 점검까지 완료했습니다. April 4, 2025 at 10:56 AM, KIM SEYEON [김세연]_FA : 감사합니다 April 4, 2025 at 10:57 AM, 송광진PM FA장비unit : @이승엽 매니저님 5/5일자로 식당운영사가 변경될 예정입니다. 식권 소진 및 구매에 참고부탁드립니다. *BP사분들께도 연락부탁드려요 April 4, 2025 at 1:25 PM, Baek Hojong(백호종)FA : @이연수 @최종건 매니져님 양극 롤AGV 여러대가 프레스 E1PRC010 포트로 들어갔다가 나온뒤 롤을 들고 공정내 대기중으로 됩니다 총 6대정도이고 동일한 포트로 반송갔다가 그냥 나오면서 롤을들고 대기중인데 현상 파악 부탁드립니다 April 4, 2025 at 2:25 PM, 이연수 : 어제 적용한 롤창고 데스트 인터락에 문제가 발견되어 ACS 원복했습니다. 창고쪽에만 적용되어야 하는데 일반 이재기에도 적용이 되어서 문제가 발생하였습니다. 수정후 재적용 하겠습니다. @유병일 @KIM SEYEON [김세연]_FA @최종건 April 4, 2025 at 2:26 PM, 문진영 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) @Jun(정우준)_SKOH FA PM님 1F 양극 릴창고 CV 판넬 바로 앞에 폐기물 박스에서 전극 가루가 판넬 내부로 유입되어 오염이 심한데 제조와 해당 폐기물 위치 변경 요청 및 내부 클리닝 좀 부탁 드립니다. 팬 필터도 교체 필요한데 저희가 여분이 없습니다. April 4, 2025 at 2:28 PM, 유병일 : 네 알겠습니다. April 4, 2025 at 2:31 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 제가 현장 확인하고 제조에 애기 해두겠습니다. 필터는 에어건등으로 이물제거후 재사용에는 문제가 있을까요? @Jun(정우준)_SKOH FA PM님 테크니션 1명만 투입해서 해당 판넬 내부 클리링 바로 가능하실까요? April 4, 2025 at 2:32 PM, 전준모 : GF ST 양극 AGV 4호기 Fork1 inplace abnormal error 장소 : Input 02 포트 원인 : 매거진 상측으로 스티커 부착되어 감지 조치 : 스티커 제거 작업자가 임의로 붙여 놓음 현상 사진 촬영 완료 April 4, 2025 at 2:33 PM, 문진영 : 일단 급한데로 에어건 이물 제거 후 사용하셔도 됩니다. April 5, 2025 at 10:11 AM April 5, 2025 at 10:11 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 차주 VD GF 전후창고 오버사이즈센서 작업일정은 하기와 같이 제조와 스케줄링 하였습니다. ㄴ4월7일 월 10시~12시GF VD 후창고 양극 크레인 ㄴ4월8일 화 10시~12시GF VD 후창고 음극 크레인 ㄴ4월9일 수 10시~12시GF VD 전창고 양극 크레인 ㄴ4월9일 수 13시~15시GF VD 전창고 음극 크레인 April 5, 2025 at 10:12 AM, 이승엽 : 감사합니다. PM님 April 7, 2025 at 8:00 AM April 7, 2025 at 8:00 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 토요일에 음극 코터 2호기 가동하는 과정에서 ID가 PNT - 이재기에 안넘어오는 현상이 있어서 AGV를 가동못했는데 PNT제어와 금일 확인 가능할까요? 10시정도에 확인하고 싶습니다. April 7, 2025 at 8:39 AM, 문진영 : 네! 알겠습니다. April 7, 2025 at 9:04 AM, KIM SEYEON [김세연]_FA : @최태영 @이승엽 매니저님 혹시 금일 알람회의 9시10분부터 가능할까요? 죄송합니다. April 7, 2025 at 9:05 AM, 최태영 : 네 April 7, 2025 at 9:51 AM, 배병민 (Bae Byoungmin) : @문진영 @정지윤 매니져님 화성 박스해체기 자재 투입 리프트단 라이트커튼 감지되고 알람은 발생되는데 리프트가 사이클 스탑으로 구동되고 있습니다 April 7, 2025 at 11:19 AM, 김상훈 : @KIM SEYEON [김세연]_FA @연해리 1F VD 후창고 음극 통신불량 관련하여, 아래와 같이 조정하였고, 오후까지 모니터링 예정입니다. - 안테나 조정 후에도 개선점이 별로 없음. - 통신거리를 늘이기 위해 2.4GHz 대역으로 채널 조정 AGV AP와의 간섭 영향이 별로 없도록 7번으로 조정 - 개선 효과 = 기존 음극 2호기 최저 -55 최대 -33 = 변경후 음극 2호기 최저 -40 최대 -27 오후 3시 정도에 AP 에러 발생 여부 확인 후 횡전개 여부 결정하겠습니다. April 7, 2025 at 11:27 AM, 문진영 : 해당 건 PNT와 이재기 데이터 쓰는 부분은 문제 없는 것 확인했습니다. 추후에는 제조에서 물류에 확인 요청 전 MES에서 데이터를 EQ로 내렸는지 먼저 확인 해달라고 전달 부탁드립니다. PNT제어분 통해 제조 사전 점검 내용들은 유병일PM님, 백호종PM님과 같이 현장에서 공유되었습니다. April 7, 2025 at 11:39 AM, KIM SEYEON [김세연]_FA : 네 감사합니다. April 7, 2025 at 12:56 PM, 김주연 : @이철훈_CIM_SKCC @이연수 매니저님 vd 미건조 발생하여 추가분석요청 메일로 드렸습니다. 확인부탁드립니다. April 7, 2025 at 1:20 PM, 김주연 : 금일까지 분석 후 공유 부탁드립니다! April 7, 2025 at 2:19 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공미팅은 없습니다. 주신 파일 리뷰 목요일 실시하겠습니다. 생산중 설비이슈는 메일로 회신 부탁드립니다. April 7, 2025 at 6:27 PM, KIM SEYEON [김세연]_FA invited 조수형팀장 SKO/FA운영팀. April 7, 2025 at 6:29 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 GF VD창고 A71 모든 포트에서 AGV가 풀 매거진 떠갈때 데이터 미스매치 에러 발생해서 현재 조치중으로 알고 있습니다. 현재 VD미건조로 고객에게 불량셀 유출 리스크가 있는데, 진행현황 공유해주시고, 데이터 문제없는지도 트래킹해서 확인해야 하겠습니다. April 7, 2025 at 6:30 PM, KIM SEYEON [김세연]_FA : - GF 음극 전창고 : 금일만 68건 발생 3/30-4/6 - GF 전창고: 양극 57건, 음극 65건 - GF 후창고: 양극 30건, 음극 43건 - 1F 전창고: 양극 79건, 음극 130건 - 1F 후창고: 양극 20건, 음극 43건 April 7, 2025 at 6:30 PM, 이승엽 : 현재 AGV 담당 및 제어 담당자가 현장에서 확인 준입니다. April 7, 2025 at 6:38 PM, 최대운 : @KIM SEYEON [김세연]_FA @연해리 전극 분체 양극 AGV3호기 E1plc031_p02 내려 놓을려고 하니 스테이션에 자재가 있다고 합니다. 창고로 다시 명령을 주면되는지 확인 바랍니다. April 7, 2025 at 6:39 PM, 이승엽 : 금일 알람 미팅 때는 이슈화가 돠지 않았었는데 나중에 확인이 된건가요? April 7, 2025 at 7:05 PM, KIM SEYEON [김세연]_FA : 네 현상을 늦게 확인하였습니다. April 7, 2025 at 7:34 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 죄송합니다만 혹시 현장에 누가 계시면 그 자재 현장 스테이션근처 내려놓고 자재 ID만 공유부탁드립니다. 창고로 넣으면 NG로 반송가능자재로 안잡힙니다. April 7, 2025 at 7:35 PM, 최대운 : 자재 치워 주셔서 반송 처리 했습니다. April 7, 2025 at 7:36 PM, KIM SEYEON [김세연]_FA : 감사합니다 April 7, 2025 at 9:22 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 늦더라도 금일 해당 현상 원인 및 조치 완료 현황 공유 부탁드립니다. April 7, 2025 at 9:27 PM, 문진영 : 해당 건은 현장에서 조치 후 연해리PM님께 1차 공유 드렸습니다. AGV 적재 후 AGV와 포트 간 PIO 완료가 안되어 포트에 데이터만 남아 있는 상황으로 포트에서 AGV COMP.를 못 받는 경우 ASC COMP.받아 데이터 삭제하는 부분 보강하였습니다. 추가로 AGV쪽에도 COMP. 로직쪽 보강해서 정상 AGV COMP.와 ACS COMP.받는것까지 확인했습니다. April 7, 2025 at 9:30 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 하기 8개 상황에 모두 동일하게 횡전개 된 상황인지 문의드립니다. ㄴ GF VD 전창고 양극 ㄴ GF VD 전창고 음극 ㄴ GF VD 후창고 양극 ㄴ GF VD 후창고 음극 ㄴ 1F VD 전창고 양극 ㄴ 1F VD 전창고 음극 ㄴ 1F VD 후창고 양극 ㄴ 1F VD 후창고 음극 April 7, 2025 at 9:33 PM, 문진영 : GF, 1F 공통으로 상황 조치 시 포트는 화물 없이 데이터만 있는 경우 40초 후 알람 발생하며 데이터 삭제하지 않고 단순 리셋 조치 시 지속 발생됩니다. 1F의 경우 최초 AGV PIO 알람 후 수동 화물 이재 상황에서 포트 데이터 미삭제하여 발생 후 단순 리셋하여 다발한 사례를 플레이백 통해 설명 드렸습니다. April 7, 2025 at 9:45 PM, 문진영 : 전창고 출고 포트쪽 ASC Comp. 추가 보강은 1F 전창고는 기존 적용했고 GF 전창고 포트는 금일 횡전개 했습니다. 후창고는 창고 입고 포트이기에 상위쪽과 좀더 확인 후 적용 예정입니다. April 7, 2025 at 9:59 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 감사합니다. April 8, 2025 at 7:10 AM April 8, 2025 at 7:10 AM, 최대운 : 어제 현장에서 정우준pm과 같이 작성한거긴 한데, 건수가 많아 현장 확인 결과 중복으로 발생되었다고 보시면 됩니다. 제대로 조치 안하고 리샛만 누르면 또 발생하는 상황이니 참고 바랍니다. April 8, 2025 at 8:23 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 제대로 조치하려면 어떻게 해야 하는지 메뉴얼 부탁드립니다. April 8, 2025 at 8:23 AM, KIM SEYEON [김세연]_FA : @이석규 매니저 님 금일 SAT 펀치 현장확인은 10시에 어디서 시작하나요? April 8, 2025 at 8:26 AM, 이석규 매니저 : 메일 송부드린대로 GF 음극 스태킹에서 모여서 시작 했으면 합니다. VD, Reel, Roller, Foil,분체 순으로 진행예정입니다. April 8, 2025 at 8:44 AM, KIM SEYEON [김세연]_FA : @이철훈_CIM_SKCC @이승엽 매니저님 vd미건조 관련해서 어제 메일 하나 더 드렸습니다. 원인과 조치, 나머지 동일한 이슈로 risk 있는 plate가 있는지 확인이 오전까지 되어야 합니다. 회신 부탁드립니다. April 8, 2025 at 8:47 AM, 이철훈_CIM_SKCC : 네 알겠습니다 April 8, 2025 at 9:01 AM, 최태영 : 안녕하세요 금일 조립 알람 데일리 미팅 리마인드 드립니다~ April 8, 2025 at 9:06 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit 전극분체 스테이션 하기 그림처럼 조정 예정입니다. 확인 후 문의사항이 있으시면 회신 부탁드립니다. 확정 해주시면 일정 확인 후 공유 드리겠습니다. April 8, 2025 at 9:07 AM, 최대운 : Photo April 8, 2025 at 9:29 AM, 송광진PM FA장비unit : @이석규 매니저 매니저님 10시에 어디서 뵈면 될까요? April 8, 2025 at 9:30 AM, 이석규 매니저 : GF 스태킹 음극 순환물류쪽으로 오시면 됩니다. April 8, 2025 at 10:02 AM, 송광진PM FA장비unit : @정재훈 @Kim Dongju(김동주)_FA 1F 음극 VD전창고 펀치 먼저 보겠습니다 April 8, 2025 at 10:33 AM, 최대운 : @KIM SEYEON [김세연]_FA @송광진PM FA장비unit @이승천 1F 노칭 음극 현재 설비가 준비가 전혀 안되어 기다리다가 잠시 BO사 식사 하고 12시에 다시 들어와서 진행하겠습니다. 12시 까지 준비 될수 있게 부탁드립니거. 혹시 조금 더 늦어지면 공유 바랍니다. 9-10라인은 생산도 할수 있어 금일 테스트 우선 제외하고 진행하겠습니다. April 8, 2025 at 10:34 AM, 송광진PM FA장비unit : 양극일정인데 음극을 가셨나요? April 8, 2025 at 10:36 AM, 최대운 : 죄송합니다. 양극입니다. April 8, 2025 at 10:41 AM, 송광진PM FA장비unit : GF VD음극 전창고로 이동예정입니다 April 8, 2025 at 11:14 AM, 유병일 : 매니저님 7,8,11라인 바이패스 모드 적용 완료되었습니다. 준비되시면 바로 테스트 진행 부탁드립니다 April 8, 2025 at 11:46 AM, 최대운 : 확인 해보겠습니다. April 8, 2025 at 3:18 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @김희용 @유병일 @이승천 금일 1F 노칭 테스트한 내용 중 불합리 사항 공유 드립니다. 1. EQ 설비에서 바이패스 하고 에러 나는 설비가 자주 있습니더. 공매거진이 제대로 이동 안하고 걸리다 보니 조치 시간이 다소 걸립니다. 2. 매거진 감지를 제대로 못해 입고 포트 스토퍼가 UP을 못합니더. (7-1) 3. EQ설비의 입출고 포트가 설비 귀속이다 보니 ACS 상 화면에서 LR/UR이 제대로 상위에 전달 되었는지 알수 없는 상황입니다. EQ설비에서 제대로 UR이 안올라 가는 설비가 좀 있습니다. 잡생성이 제대로 안됩니다. 4. 9/10라인 수동 생산으로 현재는 9라인쪽 장비에 잡생성이 없어 검증에 한계가 있습니다. —> 1. 상기 내용이 조치되지 않으면 물동량 검증에 지장이 많으므로 필히 조치된이후 물동량 검증 일정을 잡아 주시면 감사하겠습니다. (테스트 시마다 요청 드린 상황입니다. April 8, 2025 at 3:23 PM, 최대운 : 7,8,11라인에 투입된 테스트 자재는 정리하지 않고 추후 테스트 시에도 사용할 수 있도록 하겠습니다. 바이패스 기능은 물동량 검증 전까지 유지 부탁드립니다. April 8, 2025 at 3:26 PM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit @김희용 @유병일 1F 노칭 물동량 검증 일정까지 한동안 물동량 검증이 없기 때문에 앞으로 한동안 공정별 발생한 AGV 에러 등을 확인 하여 조치하고 안정화에 접근 할 수 있도록 BP사하고 대응하겠습니다. 혹시 요청 사항이 있으시면 말씀해주시면 우선 조치/점검 될 수 있게 하겠습니다. April 8, 2025 at 3:33 PM, 배병민 (Bae Byoungmin) : @이연수 매니져님 어제부터 모듈 3,4라인에서 AGV 끼리 충돌 발생이 다시 되고있습니다. 어제 야간 4016, 4017 충돌 금일 주간 4028 충돌 April 8, 2025 at 3:34 PM, 배병민 (Bae Byoungmin) : 금일 발생은 15시20분경 발생하였습니다 April 8, 2025 at 4:02 PM, 최대운 : @송광진PM FA장비unit @김희용 @유병일 @이승천 지금 1F 노칭 양극 데이터 정리 완료 하였습니다. 지금부터 자동으로 생산 진행하시면 됩니다. 지금부터 UR 요청오면 AGV가 자동으로 진행하고 LR도 공자재를 창고에서 출고 예정입니다. April 8, 2025 at 4:47 PM, 이승엽 : @KIM SEYEON [김세연]_FA 변경 관리 Sheet 업데이트 본 송부 드렸습니다. 04/09~11 기간 중 비가동 필요 작업들에 대해 추가 List Up 드렸사오니, 검토 후 진행 가능 여부 확인 부탁 드립니다. April 9, 2025 at 8:10 AM April 9, 2025 at 8:10 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 상기건으로 금일 9시에 미팅을 하고싶습니다. 혹시 행정동 Zita 회의실서 뵐수 있을까요? April 9, 2025 at 8:13 AM, 최대운 : 네 알겠습니다. 9시까지 가겠습니다. April 9, 2025 at 8:17 AM, 이석규 매니저 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @정재훈 @송광진PM FA장비unit 금일 오후 2시 디버터 벨트 교체 및 모터 베이트 레벨 조정 지그, 커버제거 관련 현장 확인을 진행 했으면 합니다. 가능 하신지 확인 부탁 드립니다. 벨트 교체를 슬리터 음극 6라인 2단 컨베어 디버터에서 진행할 예정이라 음극 슬리터 메뉴얼 포트쪽으로 오시면 됩니다. April 9, 2025 at 8:19 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. 제가 참석하겠습니다. April 9, 2025 at 9:44 AM, 김상훈 : @KIM SEYEON [김세연]_FA @연해리 1F VD 창고 AP 후속 변경 작업 내용 공유드리며, 현장에서 작업 시작 시 승인 요청 예정입니다. - AGV AP 채널과의 간섭을 피하기 위한 채널 조정 - 802.11n 대역폭 조정: Min. 6Mbps로 조정 - 출력: 23dBm -> 22dBm으로 조정(Saturation 방지 목적) April 9, 2025 at 9:45 AM, 연해리 : 혹시 비가동 필요하실까요?? April 9, 2025 at 9:47 AM, 김상훈 : 15분 정도걸리는데 현장상황보고 알려드리께요 April 9, 2025 at 12:21 PM, Kim Dongju(김동주)_FA : @이석규 매니저 금일 전극동 공정감사 일정이 연기되어 오후에 진행한다고 하여 벨트 교체 일정을 변경해야 할 듯 합니다. 내일 오전 10시에 진행 괜찮으실까요? April 9, 2025 at 12:23 PM, 이석규 매니저 : 내일은 SAT 펀치 현장확인이 예정되어 있습니다. 디버터 벨트 교체는 GF 스태킹에서도 가능하고, 다른 항목도 조립동에서 확인하면 되는데 금일 조립동에서 진행하면 안될까요? April 9, 2025 at 12:33 PM, Kim Dongju(김동주)_FA : 네..알겠습니다. 조립동에서 하시죠.. 교체 위치 알려주시면 가겠습니다. April 9, 2025 at 1:02 PM, 이석규 매니저 : 2시에 GF 음극 순환물류쪽에서 뵙겠습니다. April 9, 2025 at 1:26 PM, 이석규 매니저 : @KIM SEYEON [김세연]_FA @정재훈 @송광진PM FA장비unit 전극, 조립 물류 punch 확인은 분체부터 시작 예정입니다. 명일 10시부터 진행하려하는데 괜찮으실까요? April 9, 2025 at 3:12 PM, 정재훈 : 네 April 9, 2025 at 3:15 PM, 이석규 매니저 : 넵 명일 10시 분체 GF 음극에서 뵙겠습니다. April 9, 2025 at 4:44 PM, 최대운 : @KIM SEYEON [김세연]_FA @송광진PM FA장비unit @김희용 분체 보완 내용 정리 1. 3라인 후진시 벽과 충돌 - 후진 후 바닥 단차로 미끄러짐 발생 -> 3라인 스테이션 후진시 중간에 가상점 만들어 피봇 턴 후 크랩으로 마지막노드까지 이동 (기존: 후진으로 계속 이동 변경: 후진->피봇턴->크랩 이동) -> 미끄럼 미발생(4/4일 적용 이후 발생 없음) 2. 2라인 뒷편 Station 올라탐 발생 -> 우선 50mm 덜 전진하게 변경 -> 추후 스테이션 이동 시 최종 티칭 변경 예정 3. 180, 182노드 필요 없어 제거 4. 1라인 뒷편(32노드->35노드) 장애물 감지로 go step timeout 많이 발생 -> 기존 R-turn 이동을 34번까지 직진 후 35번 중간까지 크랩 이동 후 피봇 턴하여 이동으로 변경 5. 138<->199(에어샤워 내 노드) 짧은 구간 노드 이동으로 일부 장애물 감지로 go step timeout 발생 -> 짧은 구 April 9, 2025 at 4:46 PM, 배병민 (Bae Byoungmin) : @이연수 매니져님 해당 이슈 건 확인 되셨을까요? 한동안 발생안하다가 재발하는 사유가 무엇인지.... April 9, 2025 at 4:46 PM, KIM SEYEON [김세연]_FA : 네 감사합니다. 야간에 모니터링 해보겠습니다. 금일 횡전개 완료되면 늦게라도 공유 부탁드립니다. April 9, 2025 at 4:47 PM, 최대운 : 네 알겠습니다. April 9, 2025 at 4:57 PM, 최대운 : 6. 공팔렛트 회수가 없어 분체룸내 대기 위치 제거-> 창고에 대기 위치 4곳 설정(송광진pm 요청사항) 7. 금일부터 1,2,3호기 Auto 운영 하도록 하겠습니다. April 9, 2025 at 5:11 PM, 이연수 : 로그와 플레이백 상으로는 원인이 ACS에 있는 것으로 보이는데 확실하지 않아 개발사에 분석 요청을 했고 아직 결과를 받지는 못했습니다. 원인과 조치방안 나오는대로 공유드리겠습니다. April 9, 2025 at 5:24 PM, KIM SEYEON [김세연]_FA : 4호기는 문제가 있나요? April 9, 2025 at 5:25 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 감사합니다 April 9, 2025 at 6:33 PM, 최대운 : 4호기는 주행 추가 검증 후 투입하고자 합니다. April 9, 2025 at 6:37 PM, 최대운 : 현재 3대 운영에도 문제 없는 상황입니다. 추후 스테이션 제거하고 스테이션 재티칭 점검 시 4호기 티칭 점검하면서 주행 검증도 마무리 하겠습니다. 한동안만 3대 운영 부탁드립니다. April 9, 2025 at 7:00 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 9, 2025 at 7:29 PM, 최대운 : 지금 1-3호기 횡전개 완료 하였습니다. 황전개 상황 현장에서 다 확인 하고 나왔습니다. ACS 맵업데이트는 명일 오전에 진행하도록 허겠습니다. April 9, 2025 at 7:30 PM, KIM SEYEON [김세연]_FA : 네 감사합니다 April 10, 2025 at 8:10 AM April 10, 2025 at 8:10 AM, 양원석 : @이연수 VD미진행 관련 분석 요청메일 드렸습니다. 금일중으로 회신부탁드립니다 April 10, 2025 at 8:21 AM, 이연수 : 네 금일중 보내드리겠습니다. April 10, 2025 at 8:30 AM, 김주연 : @이철훈_CIM_SKCC @이연수 매니저님, 그리고 cim weekly 앞으로 목요일 오전 10시 진행하고자 합니다. 다룰 내용은 cim 분석요청드렸던 사항들 리뷰이고요, 메일 확인부탁드립니다. April 10, 2025 at 8:34 AM, 이석규 매니저 : @Kim Dongju(김동주)_FA PM님 디버터 벨트 교체관련 9시 30분 음극 슬리터 6라인 메뉴얼포트쪽으로 오시면 됩니다. April 10, 2025 at 8:35 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. April 10, 2025 at 8:53 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금일도 9시경 OI TAS로 AGV실적 같이 봤음 합니다. PC는 시간이 좀 걸릴것 같습니다. April 10, 2025 at 9:00 AM, KIM SEYEON [김세연]_FA : 10시에 하시지요. April 10, 2025 at 9:01 AM, 최대운 : 네 알겠습니다. April 10, 2025 at 9:22 AM, 이연수 : @KIM SEYEON [김세연]_FA 금일 SCS 서머타임 재연테스트 관련하여 인프라와 협의되었고 09시부터 테스트 대기중입니다. SCS 프로그램을 패치하거나 비가동 하는건 아니고 단지 pc시간만 1시간 뒤로 바꿔놓고 이상여부를 지켜보기만 하면 되는 것이어서 금일 진행하려고 합니다. April 10, 2025 at 9:35 AM, 송광진PM FA장비unit : 분체양극 1호기는 156번 노드에서 fork bumper2 알람이 있어 티칭 재점검 부탁드립니다 April 10, 2025 at 9:37 AM, 이철훈_CIM_SKCC : 금주는 4/11(금) 로 변경 부탁 드립니다 테스트가 계획되어 있어서요. April 10, 2025 at 9:38 AM, 김희용 : @이석규 매니저 금일 10시 전극조립 물류 SAT 펀치는 어디서 만나실까요? April 10, 2025 at 9:39 AM, 이석규 매니저 : 분체 GF음극으로 오시면 됩니다. April 10, 2025 at 9:57 AM, 최대운 : 우선 스테이션 개조하면서 티칭 점검은 전체적으로 다 진행할 예정입니다. 해당 사항은 조금 더 모니터링 하겠습니다. April 10, 2025 at 10:06 AM, 송광진PM FA장비unit : @연해리 @이주봉PM LEE JUBONG(FA) sat먼저 진행할게요 April 10, 2025 at 10:08 AM, 이주봉PM LEE JUBONG(FA) : 네 곧 도착합니다. April 10, 2025 at 10:44 AM, 최대운 : @KIM SEYEON [김세연]_FA @송광진PM FA장비unit 금일 분체 양극 창고 포트에서 자재 pallet 밴딩끈으로 인해 AGV 포크에 걸려 pallet가 많이 틀어졌다고 합니다. 분체 자재 입고 시 끈 처리 계속 요청 부탁드립니다. April 10, 2025 at 10:46 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 오늘 구매 자재팀 만나서 내부적으로 다시 협의하겠습니다. 알려주셔서 감사합니다. April 10, 2025 at 11:07 AM, 이연수 : @KIM SEYEON [김세연]_FA SCS 서머타임 재연테스트 종료하겠습니다. Carrier Update 오류는 재발하지 않았고 관련 로그 분석결과 보내드리겠습니다. April 10, 2025 at 11:45 AM, 최대운 : @KIM SEYEON [김세연]_FA 4/9일 보내주신 생산중 설비 이슈 관련하여 3번항목인 전극 코터 AGV 불필요 이동 건 관련하여 날짜하고 시간을 재확인 부탁드립니다. 25년 4월 5일 주간 05:37 날짜하고 시간 재확인 부탁드립니다. April 10, 2025 at 4:50 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공미팅은 없습니다. 착오 없으시기 바랍니다. April 10, 2025 at 5:09 PM, 이승엽 : 저는 착오를 안하고 있는데 누가 가셨나요? April 10, 2025 at 5:10 PM, 이승엽 : 제가 공지를 못했나 봅니다 April 11, 2025 at 9:14 AM April 11, 2025 at 9:14 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 VD는 설비에 내려놓는 AGV랑 떠가는 AGV 호기가 다르다 보니 인플레이스 발생이 완전 제거가 어려운 상황입니다. (공정설비 내 여유공간도 많은 상황) 지난번에 말씀주신 포크에 고정하는 핀을 후면은 고정을 위해 유지하고 전면은 제거 해서 모니터링을 진행해도될까요? April 11, 2025 at 9:26 AM, KIM SEYEON [김세연]_FA : 네 진행하시고 모니터링 부탁드립니다. 결과도 공유해주세요. 감사합니다. April 11, 2025 at 9:28 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 상기 작업 완료 및 모니터링 결과 공유 부탁드립니다. April 11, 2025 at 9:37 AM, 최대운 : PM님 우선 포크핀 빼는거 추후에 다시 고민하겠습니다. BP사하고 협의 해본결과, 핀 빼는건 다른 Risk가 더크다고 하니 인플레이스 조정을 금주까지 마무리한다고 합니다. 인플레이스 조정 후 좀 더 모니터링 하도록 하겠습니다. April 11, 2025 at 9:49 AM, 최대운 : @KIM SEYEON [김세연]_FA @정재훈 차주중 분체 극성별 비가동 기간이 있을까요? 분체 스테이션 개조 일정 확인하고자 합니다. 추가 요청사항으로 비가동 기간동안 작업이 진행하다보니 페이스마스크 사용 안하고 작업 가능 한지도 확인 부탁드립니다. April 11, 2025 at 9:52 AM, 이승엽 : 네.일겠습니다. 어제 자재 반입 승인이 지연되어 작업이 조금 딜레이 되었습니다. 완료 후 공유 드리겠습니다. April 11, 2025 at 9:53 AM, KIM SEYEON [김세연]_FA : 네 확인해서 공유드리겠습니다. 페이스마스크는 SHE 규정이라 어쩔수없습니다. 작업자의 건강을 위해서라도 착용해주십시오. April 11, 2025 at 9:53 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 11, 2025 at 10:06 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 전일 주요 설비이슈 메일 송부드렸습니다. 확인 부탁드립니다. April 11, 2025 at 10:09 AM, 이승엽 : 어제 자재 반입지연으로 인해 - 작일 GF 양극 전개소 완료했고 모니터링 시 특이사항은 없습니다. - 현재 GF 음극 작업중입니다. - 금일중 1F까지 완료 목표로 작업중입니다. - 완료 후 촤종 공유 드리겠습니다. April 11, 2025 at 10:10 AM, 이승엽 : 네 April 11, 2025 at 10:12 AM, KIM SEYEON [김세연]_FA : 감사합니다 April 11, 2025 at 11:29 AM, 송광진PM FA장비unit : @최대운 매니저님 1F 음극분체룸에 있는 공팔레트들은 GF 음극으로 빼주시면 밖으로 이동하는 건 구매에서 해주시기로 했습니다. 작업 가능한 일정 확인부탁드려요. 제조에서는 공간협소로 빨리 빼달라고 하고있는점 참고부탁드려요~ April 11, 2025 at 11:44 AM, 최대운 : 오늘 GF로 내릴게요. 현장에 핸드카(2대) 사용한다고만 전달 부탁드립니다. April 11, 2025 at 11:45 AM, 송광진PM FA장비unit : 넵! April 11, 2025 at 11:47 AM, 송광진PM FA장비unit : 제조에 자키 사용도 이야기 드렸습니다 April 11, 2025 at 3:46 PM, 이승엽 : 이거 아까 제가 오버사이즈-명판작업 좀 헷갈렸는데... 오버사이즈 건은 - 04/08~09 작업 진행 완료 --> 설치 후 모니터링 시 일부 호기 문제 확인 - 04/10 센서 질못된 설치된 부분 확인 후 수정 작업 진행 (VD 음극 후단 1호기, 양극 후단 2호기) - 이후 지속 모니터링 하도록 하겠습니다. 명판건도 금일 GF~1F 잔개소 작업 완료했습니다. April 11, 2025 at 4:07 PM, KIM SEYEON [김세연]_FA : 네 감사합니다. April 11, 2025 at 4:37 PM, 최대운 : 1F 음극 테스트 자재 GF 음극쪽으로 이동 완료 하였습니다. April 11, 2025 at 5:35 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 보내드린 생산중 설비이슈 금일 조치현황 간락하게라도 공유 가능하실까요? April 11, 2025 at 5:40 PM, 이승엽 : 송부하신 메일 자체가 오후 4시 이후에 확인을 해서 BP사 공유는 하였으나 바로 작업 진행은 안되었을 것으로 보입니다 April 11, 2025 at 5:47 PM, KIM SEYEON [김세연]_FA : 네 내일은 꼭 부탁드립니다. (1)(2)번이 급합니다. April 12, 2025 at 3:10 PM April 12, 2025 at 3:10 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일은 생산중 설비이슈 조치현황 업데이트 부탁드립니다. April 14, 2025 at 8:33 AM April 14, 2025 at 8:33 AM, KIM SEYEON [김세연]_FA : @최태영 @이승엽 매니저님 금일 9시 전극 알람미팅을 9시반에 실시할수 있을까요? April 14, 2025 at 8:37 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 E0STKC51_C02번 크레인 "Travel Driver Error" 가 지속 발생합니다. 긴급하게 점검 요청드립니다. ㄴ 4월7일 12건 ㄴ 8일 21건 ㄴ 9일 13건 ㄴ 10일 22건 ㄴ 11일 33건 ㄴ 12일 34건 ㄴ 13일 25건 ㄴ 14일 현재 13건 April 14, 2025 at 8:37 AM, KIM SEYEON [김세연]_FA : 금요일 송부드린 생산중 설비이슈 (2)번 항목이었습니다. April 14, 2025 at 8:38 AM, 이승엽 : 네 점검하더록 하겠습니다 April 14, 2025 at 8:41 AM, KIM SEYEON [김세연]_FA : 감사합니다. April 14, 2025 at 8:51 AM, 최태영 : 네 알겠습니다~ April 14, 2025 at 10:01 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 아침 알람미팅시 말씀드린 내용입니다. 1. GF NC CA RTV car 1호기 - 화물 1회 옮길때마다, CV에러 뜨면서 정지 - 리셋 스타트 하면 정상 가동 GF NC CA RTV Car 2호기 - 전일처럼 EIP에러 발생 다발 - 화물 반송 시, car내부에 릴레이 탁탁 튀김. - car 인버터 전원 꺼짐. car, mcp판넬 통신 케이블 다 점검했는데 테크니션에서는 특이사항을 발견하지 못했습니다. 2. GF CA Robot 3호기 무언정지. - CCS상 스텝 9000에서 정지. - 로봇 원점,PLC 리셋, 센서 점검 등등 확인하였으나 원인 파악 불가. 현재 설비 정지 후 운영 중입니다. 3. C51 C01, C02 주행 인버터 에러 - C01 포크 인버터 에러다발 - c02 주행인버터에러, 액티브시 포크 포지션에러 4. 16363 STP 스토퍼 업다운할때 X12CC DV STP UP X12CD DV STP DN 센서 감지 되고, April 14, 2025 at 10:09 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 혹시 스택 GF 현재 8대 AGV 가동중인데 2대 OUT 이유 알고계신가요? 저희 내부적으로도 확인중입니다. April 14, 2025 at 10:13 AM, 최대운 : GF 양극 4호기는 브레이크 금일 점검 예정입니다. 그 외 한대는 Out 하지 않았습니다. April 14, 2025 at 10:30 AM, KIM SEYEON [김세연]_FA : Photo April 14, 2025 at 10:30 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금주에 코터 전용 AGV 프레스에서 코터로 이동 부탁드립니다. 진행시 @배병민 (Bae Byoungmin) 피엠님과 상의해주세요. 감사합니다. April 14, 2025 at 10:31 AM, 최대운 : 네 알겠습니다. 이동 가능한 날짜 공유 드리겠습니다. April 14, 2025 at 10:35 AM, 최대운 : 수량이 증가하다보니 주차 위치 확보는 필요해 보이니 이동전에 주차 위치는 확인 바랍니다. April 14, 2025 at 10:37 AM, 배병민 (Bae Byoungmin) : 추가 대기 위치 말씀 하시는거죠? 혹시 기존 대기위치 맵 공유 가능하실까요? April 14, 2025 at 10:42 AM, 최대운 : 지금 현재 4라인쪽 자재 등으로 대기 위치에 다 놓을수 없을겁니다. 8대 모두 Auto로 하실예정이면 4라인 자재 정리가 우선입니다. 8대 대기 위치는 1-4라인까지 모두 활용 해야될것 같습니다. April 14, 2025 at 10:46 AM, 배병민 (Bae Byoungmin) : 네 코터 4라인은 차주부터 순차적으로 R&R 진행 예정이라서 주변 정리 요청 예정이며 3,4라인쪽 다 사용 계획입니다. 감사합니다 April 14, 2025 at 11:01 AM, 이석규 매니저 : @배병민 (Bae Byoungmin) PM님 노칭 로봇 티칭 방법 관련 현장 확인 언제 시간 되실까요?가능한 일정 알려주시면 감사하겠습니다. April 14, 2025 at 11:11 AM, 배병민 (Bae Byoungmin) : 금주 수요일 13시30분 GF 노칭 음극에서 뵙겠습니다. 감사합니다 April 14, 2025 at 11:15 AM, 이석규 매니저 : 넵 감사합니다. April 14, 2025 at 11:32 AM, 이승엽 : @방혁 PM(Bang.Hyuk) FA PM님. 정확히 언제 다시 점검 작업 재개할 수 있을까요? April 14, 2025 at 11:34 AM, 방혁 PM(Bang.Hyuk) FA : 금일 오전까지 RTV가 정상가동되지 않아서 노칭에 양극 노칭에 릴이 4개밖에 안나와있습니다. 24개정도 릴 배출되어야 점검 작업 가능할것같습니다 April 14, 2025 at 11:38 AM, 문진영 : 3번 항목 중 STKC51 C01, C02 가감속 원복 후 지속 알람 발생하는지 모니터링해보겠습니다. 그 외 항목은 점검 후 공유드리겠습니다. April 14, 2025 at 11:40 AM, 문진영 : 혹시 RTV 점검 시에 제조와 릴창고 매뉴얼 포트 통해서 릴 출고 협의가능할까요? 그러면 점검 시간 확보가 가능할 듯 해서요. April 14, 2025 at 11:43 AM, 방혁 PM(Bang.Hyuk) FA : 잠시만요 April 14, 2025 at 1:23 PM, 최대운 : 4/15 또는 4/16일 중 날짜 정해주시면 이동 가능합니다. April 14, 2025 at 1:25 PM, 배병민 (Bae Byoungmin) : 명일 진행 부탁드립니다. (4/15) 시간 알려주시면 제가 현장에가 같이 대응하겠습니다 April 14, 2025 at 3:00 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 4월4일버전 AGV 전체호기 CHECK SHEET에는 양극4호기 문제 없었는데, 브레이크에 어떤 문제가 있어서 어떤조치 예정이신가요? April 14, 2025 at 3:15 PM, 최대운 : This message was deleted. April 14, 2025 at 3:16 PM, 최대운 : 갑자기 브레이크 전원이 안들어 와서 확인해보니 브레이크 유닛 전원 케이블의(2가닥 중 1가닥) 단선 발생된거 확인 했습니다. 지난주 목요일 또는 금요일 확인 하였습니다. 스페어로 가지고 있는 유닛으로 금일 교체 예정입니다. April 14, 2025 at 3:49 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공 미팅은 17시에 행정동에서 하겠습니다. 참석 부탁드립니다. April 14, 2025 at 3:49 PM, 이승엽 : 넵 April 14, 2025 at 4:37 PM, 최대운 : 프레스 AGV 아랴 호기를 코터 전용으로 이동하겠습니다. - 양극 2대 이동(17, 22호기) - 음극 1대 이동(21호기) 이동시간은 오전 10시에 진행하며, ACS 업데이트와 동시에 진행예정입니다. 최종 코터전용 호기 입니다. 양극 코터: 2 3 4 8 11 17 19 22 음극 코터: 2 3 4 9 12 16 20 21 April 14, 2025 at 4:38 PM, 배병민 (Bae Byoungmin) : 넵 알겠습니다 April 15, 2025 at 8:31 AM April 15, 2025 at 8:31 AM, 최태영 : 안녕하세요 금일 조립 알람 데일리 미팅 리마인드 드립니다~ April 15, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : 네 참석하겠습니다. April 15, 2025 at 8:59 AM, 문진영 : 1. RTV는 누군가 스토퍼 브레이크 해제 상태여서 문제가 있어 조치 후 해당 버튼 UI삭제. 스토퍼 추가 후 스페어 RTV는 CP 미교체하여 발생한 건으로 어제 CP교체 완료 2.로봇 무언 정지 관련 로봇 이재 중 매뉴얼 전환 되고 화물 원복 시 CCS에서 목적지 삭제 불가하여 이적재 진행 못함 - 우선 임시로 매거진 이재 완료 후 목적지 삭제 후 정상화 진행. (추후 해당 상황 시 CCS에 목적지 남아 있는지 확인 및 삭제 요청 드림) 3. 릴창고 C01 근접 에러 및 MC TRIP 후 단순 리셋 시 알람 발생. (정상 알람 조건임.) 주행 인버터 에러는 51호기 가감속 속도 업 모니터링 중 발생하여 어제 정상 SEW 권장 가감속으로 원복함.(추가 발생 모니터닝 중) 4.스토퍼 구동 상태, 센서 셋팅은 문제가 없기에 추가 확인 및 모니터링 예정 (혹시 주간 시간에 해당 사항 발생 시 인폼 요청 드림) April 15, 2025 at 9:21 AM, 방혁 PM(Bang.Hyuk) FA : 매니저님 SEW 권장 가감속도로 원복했다. 라는 부분에서 가감속이 높으면 인버터 부하 및 노이즈 증가가 있었다. 라고 생각이 듭니다. 접지 부분하고는 연관이 없을까요? April 15, 2025 at 9:22 AM, 문진영 : 가감속이 높아지면 부하가 올라가서 발생한거고 노이즈 영향은 아닙니다. April 15, 2025 at 9:25 AM, 방혁 PM(Bang.Hyuk) FA : 네 이해했습니다 감사합니다 April 15, 2025 at 9:39 AM, 문진영 : C02에서 주행인버터에러 발생하면서 C01이 주행 중 근접 에러 발생하면서 비상 정지로 인해 에러가 뜨는 거라서 주행 가감속 원복하면 포크 비상정지 에러도 같이 감소할 듯 합니다. April 15, 2025 at 3:27 PM, 배병민 (Bae Byoungmin) : @최대운 매니져님 코터 양극 AGV가 코터에서 롤창고로 반송완료후 롤창고 대기위치에서 대기를 하고 있습니다. 이경우 RW에서 UR 진행시 이동시간이 더 소요되는데 창고 반송 완료후 코터 설비 룸내 대기위치에서 대기할수있나요? 알려주시면 제가 해볼께요 April 15, 2025 at 3:30 PM, 최대운 : 안그래도 코터 전용 대기 위치 메일로 공유 드릴예정입니다. 금일 중 공유 드리겠습니다. April 15, 2025 at 3:31 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 April 15, 2025 at 4:19 PM, 문진영 : @KIM SEYEON [김세연]_FA PM님 금일 슬리터 2단 CV, 릴창고 상공데크 CV 싸이클 스탑 확인 시 이상 없었습니다. 다만 인터페이스가 많은 구간이라서 싸이클 스탑 시간은 좀 소요됩니다. April 15, 2025 at 4:50 PM, 방혁 PM(Bang.Hyuk) FA : @문진영 매니저님 GF CA NC RTV점검 종료되었을까요? April 15, 2025 at 5:10 PM, 문진영 : 네! 종료했습니다. April 15, 2025 at 5:15 PM, 문진영 : @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA PM님 죄송한데 SAT 잔건 작업으로 GF NC RTV LIFT 비가동 작업이 필요한데 하기 시간과 같이 양,음 순차 작업 시 제조와 해당 시간 릴창고 포트로 릴 출고 가능한지 확인 좀 부탁드립니다. - 4/16 양극 2시간 (9~11시) , - 4/16 음극 2시간 (11시~13시) 긴급 요청 드려 죄송합니다. April 15, 2025 at 5:51 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 전극롤에 대해 Offset 주는것은 크게 문제가 안될것 같은데, 조립동은 전도 등이 발생할 수 있어 아직까지는 테크니션 분들이 offset 적용안 할 수 있게 교육 부탁드립니다. 조립동도 offset관련 상세 매뉴얼을 제공 드릴 예정입니다. 전극동 roll offset 설정 자료는 주의사항을 추가하여 재송부 드렸습니다. 참고 바랍니다. April 16, 2025 at 9:57 AM April 16, 2025 at 9:57 AM, 김희용 : This message was deleted. April 16, 2025 at 1:05 PM, 전준모 : @김희용 금일 AGV SAT Punch 잔건 점검합니다 장소 : 1F NC 음극에서 시작 시간 : 15:30 현장에서 뵙겠습니다 감사합니다 April 17, 2025 at 8:05 AM April 17, 2025 at 8:05 AM, 이석규 매니저 : @KIM SEYEON [김세연]_FA @김희용 금일 SAT Punch 전극,조립 물류 잔건 진행을 기 메일드린대로 10시 진행 예정입니다. 장소 : 슬리터 양극 1라인 요청사항 : 창고 cctv 세팅관련 법인 인원 1명 지원 요청 드립니다. 장소는 슬리터 양극 1라인으로 오시면 SMC와 같이 진행예정입니다. April 17, 2025 at 8:55 AM, 김희용 : @배병민 (Bae Byoungmin) @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 금일 10시 : 전/조 물류 Punch (슬리터양극#1) : 창고 CCTV 시간세팅 14시 : 전/조 창고 Punch 이있습니다 April 17, 2025 at 8:59 AM, 문진영 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) PM님 혹시 누군가 전극/조립 물류쪽 터치를 수정하는 듯 한데 내용 아시나요? April 17, 2025 at 9:00 AM, 배병민 (Bae Byoungmin) : 매니져님 혹시 어느 공정/Unit 인지 알수있을까요? HMI 작화 부분이 수정된건가요? April 17, 2025 at 9:06 AM, Kim Dongju(김동주)_FA : 준공잔건 항목에 VD창고의 CCTV 영상 배열 및 명칭 변경 요청건이 있습니다. 혹시 해당 부분도 개선 진행하시는 건지요? April 17, 2025 at 9:08 AM, 문진영 : 우선 확인 개소는 1F 양극 순환입니다. April 17, 2025 at 9:13 AM, 최대운 : @KIM SEYEON [김세연]_FA 차주 월요일부터 분체 스테이션 작업 진향하고자 합니다. 첫 스테이션 진행 전 현장확인하고자 하셔서 사전 공유 드립니다. 1. 설치 전 구두로도 협의 가능하시면 금일 현장에서 BP사와 현장 체크하기로 했으니 금일 현장에서 협의 가능합니다. 2. 설치 직전에 보시기를 원하시면 차주 월요일 가능합니다. 정확한 시간은 월요일 공유 가능합니다. 둘중 하나 선택하셔서 알려주시면 될 것 같습니다. April 17, 2025 at 9:13 AM, 문진영 : 이건은 시간 맞추는 부분 외 나머지는 매뉴얼 제공으로 이전 준공 미팅 시에도 협의 드린 건입니다. April 17, 2025 at 9:15 AM, 배병민 (Bae Byoungmin) : 네, 내용 확인 되었습니다. 저희쪽에서 1F 순환물류 HMI 작화 변경 작업한부분으로 확인되었습니다. 사전 협의가 안된부분 죄송합니다 자세한부분은 유선으로 연락드리겠습니다. April 17, 2025 at 9:17 AM, Kim Dongju(김동주)_FA : 실적에는 진행 중으로 아무런 내용이 없습니다.. 그럼 메뉴얼 공유는 언제 가능하신지요? April 17, 2025 at 9:19 AM, 문진영 : 몌뉴얼은 금일 송부드릴 예정이고 1차 시간 맞췄는데 약 2분 차이난다고 하시어 완료 처리 안하고 금일 법인과 같이 시간만 셋팅하고 법인 인원과 같이 진행했기에 오후 SAT 잔건 검수 시 완료 처리하려고 했습니다. April 17, 2025 at 9:22 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. April 17, 2025 at 9:45 AM, 김주연 : @이철훈_CIM_SKCC 매니저님 기존 메일 공유드렷던것과 동일하게 금일 9시에 시스템 punch 위클리 진행합니다. 웹액스 3번방입니다. April 17, 2025 at 9:45 AM, 이철훈_CIM_SKCC : 금요일 9시로 알겠습니다. April 17, 2025 at 9:53 AM, 김주연 : 목요일 9시 맞습니다! April 17, 2025 at 12:59 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 작업허가서 작성하셔서 작업시 비치 부탁드립니다. April 17, 2025 at 1:00 PM, KIM SEYEON [김세연]_FA : 싸인은 김희용 김동주 피엠님이 해주실겁니다. April 17, 2025 at 1:01 PM, 최대운 : 네 알겠습니다. April 17, 2025 at 1:04 PM, 최대운 : @KIM SEYEON [김세연]_FA ACS상에서 AGV 대기위치 설정하는거 매뉴얼로 공유 드리겠습니다. 현재 공정별 대부분 대기 위치는 지정되어 있습니다. 혹시 현장 운영시 조정이 필요한 부분은 자체적으로 조정하시면 될것 같습니다. April 17, 2025 at 1:34 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 17, 2025 at 1:35 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공미팅은 실시하지 않겠습니다. 완료 및 확인요청 건이 있으시면 업데이트 후 메일로 송부 부탁드립니다. 감사합니다. April 17, 2025 at 1:47 PM, 이승엽 : 네 알겠습니다 April 17, 2025 at 4:05 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @송광진PM FA장비unit 분체 룸내 바인더 룸은 실자재를 수동으로 하는걸로 결정 난걸로 알고 있습니다. 그럼 바인터룸내 station은 모두 제거 해도 되는지 회신 부탁드립니다. April 17, 2025 at 5:18 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 분체 Station 조정 관련하여 현장 확인 결과 1. Station이 두개짜리는 하기 그림으로 조정하고자 합니다. 사유는 분체는 화기 작업이 불가하여 커팅을 못하는 상황이고 전반적인 통일성을 위해 현장에서 변경 하였습니다. 2. Station 3개짜리(음극)는 전극 담당자하고 이반차 FA 담당자하고 현장 협의 후 진행이 필요할것 같습니다. (차주 화요일 이후 일정 잡아주시면 현장에서 설명 드리겠습니다. April 17, 2025 at 5:18 PM, 최대운 : Photo April 17, 2025 at 5:19 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 상기 그림으로 수정된 메일을 공유 하도록 하겠습니다. April 17, 2025 at 5:30 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 18, 2025 at 9:10 AM April 18, 2025 at 9:10 AM, 배병민 (Bae Byoungmin) : @최대운 매니져님 양극 코터 AGV#12 오류부분 점검 시 일정 공유 주시면 상황 설명 및 저도 같이 현장에서 하는법 배우도록 하겠습니다. ㄴ 김세연PM님 메일 참조 April 18, 2025 at 9:13 AM, 배병민 (Bae Byoungmin) : 음극 AGV#12 입니다 April 18, 2025 at 9:14 AM, 최대운 : 아침레 출근 하자마자 BP사에 확인 요청해서 지금 현장에서 점검 중이라고 합니다. 지금 현장에 가시면 확인 가능할것 같습니다. April 18, 2025 at 9:14 AM, 배병민 (Bae Byoungmin) : 넵 감사합니다 April 18, 2025 at 9:53 AM, 전준모 : This message was deleted. April 18, 2025 at 10:23 AM, 최대운 : 12호기 코터 1라인은 확인결과 턴값 기존 0.400 -> 0.600조정 후 잘맞습니다. April 18, 2025 at 10:24 AM, 배병민 (Bae Byoungmin) : 네 같이 확인 하였습니다. 제가 현장에서 계속 모니터링 해보겠습니다 감사합니다 April 18, 2025 at 8:36 PM, 배병민 (Bae Byoungmin) : @문진영 @심찬울 매니져님 안녕하세요 최근 양극 롤창고 제어 변경점 있으실까요? 창고 2번 포트에서 이재기에있는 Roll을 AGV에 수동으로 내려놓을려고 하는데 Y축,Z축 포지션 이동 완료후 A(L), A(R) 축이 포지션이동이 안됩니다. 포지션이동을 눌러도 움직임이 없습니다 인터락조건은 정상입니다 (녹색표기) April 18, 2025 at 8:37 PM, KIM SEYEON [김세연]_FA : 변경점 확인 부탁드립니다. April 18, 2025 at 8:37 PM, 배병민 (Bae Byoungmin) : 조그로 그리퍼 한쪽씩 이동을 할려고해도 조그 기동시 좌, 우측이 같이 동작되어 롤을 빼기가 힘든상황입니다 April 18, 2025 at 9:30 PM, 문진영 : 변경점은 없습니다. April 18, 2025 at 9:32 PM, 심찬울 : Pm님 변경점은 없고, 저번에 이재기 교육 드렸듯이 좌/우측 jog모드로 따로 움직일수있는거 설명드렸던 내용과 같이 조잗하면 됩니다 April 18, 2025 at 9:32 PM, KIM SEYEON [김세연]_FA : 혹시 명일 출근하시는 분이 있으시면 확인 부탁드립니다. April 18, 2025 at 9:35 PM, 배병민 (Bae Byoungmin) : Roll 창고는 이재기 교육이 없었습니다. 코터 이재기랑 조그 기동 방식이 조금 다른 부분이 있는데 좌,우측을 다 같이 쓰는 조건 인거 같습니다. 별도로 좌,우측을 달리 쓰는 방식이 있으면 담에 한번 알려주시면 감사하겠습니다 April 18, 2025 at 9:38 PM, 심찬울 : 이재기 조그기동방식은 동일조건으로 되어있어서 말씀드린내용인데, 다음에 현장에서 말씀드리겠습니다 April 18, 2025 at 9:38 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 April 18, 2025 at 9:39 PM, 배병민 (Bae Byoungmin) : Y,Z는 동일한데 그립 A축만 알려주시면 될꺼 같습니다 April 18, 2025 at 9:42 PM, 심찬울 : 피엠님 죄송합니다, A축 개별 동작 안되는 조건은 SKOn에서 요청 사항으로 안되어있습니디. April 18, 2025 at 9:43 PM, 문진영 : X죽 개별 조그 동작은 인턱락 요청하시어 막은 부분인데 이제 안된다고 이야기하시면 BP사에 또 풀어라고 하기가 어려위요. April 18, 2025 at 9:45 PM, 배병민 (Bae Byoungmin) : 우선 A축 포지션 기동 상태에서 포지션 이동이 안되는 부분이 확인 필요할꺼 같습니다. April 18, 2025 at 9:46 PM, 배병민 (Bae Byoungmin) : Y,Z 축이 정상 위치에서 A축 포지션 녹색 표기되고 눌러도 이동이 안되는 부분입니다 April 18, 2025 at 9:47 PM, 배병민 (Bae Byoungmin) : 넵 이부분은 이해했습니다. 정상 인터락동작으로 보면 될꺼같습니다 April 18, 2025 at 9:49 PM, KIM SEYEON [김세연]_FA : 변경해 달라는 이야기는 아닌것 같습니다. @배병민 (Bae Byoungmin) 피엠님과 현장서 같이 확인 부탁드립니다 April 18, 2025 at 9:53 PM, 문진영 : 인터락 부분은 저희도 지속 이야기 드렀듯이 조치 시 어려움이 있기에 risk부분 이야기 드렸는데 그럼에도 요청하신 부분을 반영하다보니 조치 시 어려움이 있으신 듯 합니다. 이 시점에 또 다시 풀어드리긴 어려움이 있어요. April 18, 2025 at 9:57 PM, 배병민 (Bae Byoungmin) : 매니져님 인터락을 풀어달라는 요청이 아닙니다. A축 개별 조그 기동이 되신다고하여서 제가 했을때는 안되어 알려달라고 한부분입니다. 기존 인터락 요청으로 반영되어 있는거면 그냥 유지하시면 되겠습니딘. April 18, 2025 at 9:59 PM, 문진영 : SAT현장 검수 시 그걸 막아달라고 하시어 막았던 부분입니다. ㅠ April 19, 2025 at 11:59 AM April 19, 2025 at 11:59 AM, KIM SEYEON [김세연]_FA : Photo April 19, 2025 at 12:00 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 작업시 사전 공유 부탁드립니다. April 19, 2025 at 12:32 PM, Baek Hojong(백호종)FA : @이승엽 매니져님 제조요청으로 양극 슬리터 공트레이가 오지 않는다 하여 확인해보니 릴창고 슬리터 컨베어 구간 기구제어 작업중이시던데 정보라도 공유해주셔야 제조도 알고 저희도 압니다 작업하실때 사전공유 부탁드립니다 April 19, 2025 at 12:39 PM, 이승엽 : 네 죄송합니다. 해당 내용 저희도 공유 받지 못하였는데 확인하고 이후에는 공유 드릴 수 있도록 하겠습니다 April 21, 2025 at 8:59 AM April 21, 2025 at 8:59 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 E0STKC51 C02번 크레인 TRAVEL DRIVER ERROR가 지속 발생합니다. ㄴ4월17일 11건 ㄴ18일 11건 ㄴ19일 4건 ㄴ20일 8건 원인확인 및 재발방지 부탁드립니다. April 21, 2025 at 9:00 AM, 이승엽 : 네 확인하도록 하겠습니다 April 21, 2025 at 11:12 AM, 최대운 : @KIM SEYEON [김세연]_FA @동현 현재 분체 스테이션 작업 중이며, 추가 인원이 투입되어 3분이서 작업 중입니다. 3개짜리 스테이션은 현장 확인 후 진행 예정입니다. 2개 스테이션은 생산에 지장 안되게 1-4라인 앞쪽 제거를 하고자 합니다. 원래 생산없는 2-3라인 진행 중인데,전체 다 진행해도 문제 없을것 같아 동시에 진행하고 잡 합니다. 진행해도 될까요? April 21, 2025 at 12:03 PM, 동현 : 2개 스테이션 관련 1,4라인은 가이드 제거만 해주시고(앙카 작업 불가), 분체 스테이션 작업시 청소기로 이물 발생없도록 주의부탁드립니다. 또 AGV 동선 방해되지않도록 생산 먼저 진행하게해주세요! April 21, 2025 at 1:19 PM, 최대운 : 네 알겠습니다. 감사합니다. April 21, 2025 at 4:52 PM, 문진영 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) PM님 혹시 REEL창고 레이저 거리 센서 스페어 보유하고 있는지 긴급 확인 좀 부탁드립니다. P&F OMR150M-R1000-SSI-V1V1B April 21, 2025 at 4:57 PM, 문진영 : @Kim Dongju(김동주)_FA @연해리 PM님 확인 부탁드립니다. April 21, 2025 at 4:58 PM, 배병민 (Bae Byoungmin) : 잠시만요 확인 해볼께요 April 21, 2025 at 5:04 PM, Kim Dongju(김동주)_FA : 어떤 이슈가 있는건가요? April 21, 2025 at 5:05 PM, 문진영 : 아뇨. 지금 주행 드라이버 에러 점검 중인데 혹시 필요 시 레이저 거리 센서도 교체해보려하는데 혹시 교체 파트가 있는지 문의드린겁니다. April 21, 2025 at 5:05 PM, 배병민 (Bae Byoungmin) : 센서 스페어 있습니다. 케이블은 별도 필요 없으신거죠? 어디로 드릴까요! April 21, 2025 at 5:07 PM, 문진영 : 확인 감사합니다. 필요 시 말씀드릴께요. April 21, 2025 at 5:08 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 오늘은 필요 없으신거죠? 스페어가 화성에 있어 제가 지금 거기에 있거든요 April 21, 2025 at 5:10 PM, 문진영 : 그럼 미리 지금 주시면 필요 시 교체하고 불필요하면 다시 반납 드릴께요. April 21, 2025 at 5:11 PM, 문진영 : 지금 릴창고 양극에 있습니다. 혹시 케이블도 같이 주실 수 있을까요? April 21, 2025 at 5:18 PM, 배병민 (Bae Byoungmin) : 네 같이 챙겨서 조립 흡연장으로 가겠습니다 15분뒤 뵙겠습니다. April 21, 2025 at 5:20 PM, Kim Dongju(김동주)_FA : @문진영 매니저님 재고는 저희가 가지고 있지만, 해당 자재는 BOM상 찾을 수가 없습니다.(4/16일 이석규M 메일). BOM list 업데이트 요청 부탁드립니다. April 21, 2025 at 5:24 PM, 이석규 매니저 : 제가 보내드린건 전극, 조립 물류쪽이었습니다. 전극, 조립 창고쪽 업데이트해서 보내드릴예정입니다. April 21, 2025 at 5:30 PM, 이석규 매니저 : @KIM SEYEON [김세연]_FA 노칭 인아웃 포트 ㄴ가이드 끝단부 가공 없이 그냥 설치 해도 될까요?시간이 많이 지나서 빠른 결정해주시면 설치하겠습니다. 명일 오전까지 결정부탁드립니다. April 21, 2025 at 5:31 PM, Kim Dongju(김동주)_FA : 엑셀 시트에는 창고 내용도 포함이 되어 있습니다만.. 알겠습니다. April 21, 2025 at 5:33 PM, 배병민 (Bae Byoungmin) : 네 설치해주세요 April 21, 2025 at 5:34 PM, 이석규 매니저 : 네 알겠습니다. April 21, 2025 at 5:34 PM, 배병민 (Bae Byoungmin) : 지난번 데일리 미팅시 설치하기로 협의되었습니다 April 21, 2025 at 6:31 PM, 배병민 (Bae Byoungmin) : @문진영 매니져님 혹시 양극 릴창고 다운중인가요? April 21, 2025 at 6:31 PM, 배병민 (Bae Byoungmin) : Photo April 21, 2025 at 6:31 PM, 문진영 : 네! 지금 에러 점검 중입니다. 최대한 빠르게 조치하겠습니다. April 21, 2025 at 6:33 PM, KIM SEYEON [김세연]_FA : Photo April 21, 2025 at 6:34 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 혹시 금일 양극 분체 AGV 변경사항 있었는지 확인 부탁드립니다. April 21, 2025 at 6:35 PM, 최대운 : 변경사항은 없습니다. April 21, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : UT쪽 변경사항 있는지 확인해보겠습니다. April 21, 2025 at 6:37 PM, 배병민 (Bae Byoungmin) : 네 알겠습니다 조치 되면 공유 부탁드립니다. April 21, 2025 at 6:38 PM, 문진영 : 네! 알겠습니다. April 21, 2025 at 6:53 PM, KIM SEYEON [김세연]_FA : Photo April 21, 2025 at 6:53 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 분체 agv 점검 가능하신 분이 계실까요? April 21, 2025 at 6:57 PM, 최대운 : 죄송합니다. 지금 당장 점검 할 수 있는 인력이 없습니다. 그리고 안창회수석님은 확인도 안하고 말씀하시는것 같습니다. April 21, 2025 at 7:00 PM, 문진영 : 지금 에러 정상화 후 모니터링 하고 있습니다. April 21, 2025 at 7:01 PM, 배병민 (Bae Byoungmin) : 넵 감사합니다 April 21, 2025 at 7:02 PM, KIM SEYEON [김세연]_FA : 내일 부탁드립니다. April 21, 2025 at 7:36 PM, 최대운 : 우선 ACS 확인 결과 agv가 pio를 걸었는데 에어샤워가 안받은걸로 보입니다. 알람도 에어샤워 pio 연결지연입니다. 명일 한번 더 확인 하겠습니다. April 21, 2025 at 8:02 PM, KIM SEYEON [김세연]_FA : 네 감사합니다 April 21, 2025 at 8:02 PM, KIM SEYEON [김세연]_FA : UT에도 요청하겠습니다 April 21, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : E0STKC51 C02번 크레인이 5분-10분-15분 마다 Travel driver error 지속 발생 중입니다. April 21, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 April 21, 2025 at 9:08 PM, 문진영 : 죄송합니다. 내일 출근하자마자 추가 점검 하도록 하겠습니다. April 21, 2025 at 9:09 PM, 문진영 : 혹시 죄송한데 조립은 RTV 포트로 출고 및 MCS운영 통해 전극은 52로 입출고 전환 부탁드려도 될까요? April 21, 2025 at 9:13 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 21, 2025 at 9:13 PM, 문진영 : 감사합니다. April 22, 2025 at 8:51 AM April 22, 2025 at 8:51 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 어제 travel driver error로 비가동이 많았습니다. 금일 오전 바로 점검 부탁드립니다. April 22, 2025 at 8:55 AM, 문진영 : 네! 알겠습니다. April 22, 2025 at 9:01 AM, KIM SEYEON [김세연]_FA : 감사합니다 April 22, 2025 at 10:18 AM, 최대운 : @KIM SEYEON [김세연]_FA @동현 금주 분체 Station 3개 station 조정 관련 전극 담당자분 및 이반차FA에 현장 미팅 가능한 일정 확인 부탁드립니다. April 22, 2025 at 10:55 AM, KIM SEYEON [김세연]_FA : 내일 오후 13시반에 하시지요. April 22, 2025 at 10:55 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 지금 UT 안창회 수석 들어왔는데, 분체 AGV 확인해주실분 계실까요? April 22, 2025 at 11:04 AM, 최대운 : 네 알겠습니다. April 22, 2025 at 11:09 AM, 최대운 : 지금 당장은 안되고, 식사하시고 2시에 현장에서 뵈면 어떨까요? April 22, 2025 at 11:14 AM, KIM SEYEON [김세연]_FA : 네 April 22, 2025 at 12:06 PM, 김희용 : @문진영 매니저님 로그로 좀 확인해보니E0STKC51 C01은 발생 없고, C02만 3월에 1회/일 정도로 나다가 4/7 부터 발생이 급증하였습니다. 도움될까하여 공유드립니다. April 22, 2025 at 12:07 PM, 문진영 : 네! 공유 감사합니다. April 22, 2025 at 12:54 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 분체 점검 안해도 될것 같습니다. April 22, 2025 at 12:54 PM, KIM SEYEON [김세연]_FA : Photo April 22, 2025 at 12:57 PM, 최대운 : 네, 안창회 수석님께도 항상 체크 후 문제여부 공유될 수 있도록 해주십시오~ April 23, 2025 at 8:52 AM April 23, 2025 at 8:52 AM, 최태영 : 금일 알람 데일리 미팅 리마인드 드립니다~ April 23, 2025 at 9:20 AM, KIM SEYEON [김세연]_FA : Photo April 23, 2025 at 9:20 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 상기 노칭호기와 AGV 7호기에서 전도 발생했습니다. April 23, 2025 at 9:23 AM, 최대운 : 네 점검 하도록 하겠습니다. April 23, 2025 at 12:33 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 2시까지 갈수 있을것 같습니다. April 23, 2025 at 12:53 PM, 최대운 : 네 2시에 뵙겠습니다. April 23, 2025 at 4:19 PM, 최대운 : @KIM SEYEON [김세연]_FA @지석범PM (이반차FA) 전극 음극 창고 2번호기에 Turn 에러로 Retry 발생시 자동으로 이재기에서 AGV에게 보정각도를 제공 PLC 업데이트 완료 하였습니다. (지석범pm이 진행) AGV는 현재 생산호기만 업데이트 하였습니다. 나머지 호기는 추후 진행 예정으로 음극은 아래 호기 외 추가 투입은 하지 말아주시고 추가 업데이트 진행하게 되면 다시 공유 드리겠습니다. GF Roll 음극 AGV - 1, 7, 10, 11, 15, 17, 19, 22, 23, 24, 25 GF Roll 음극 코터 AGV - 2, 12, 16 위 호기들 횡전개 완료하였습니다. April 24, 2025 at 8:41 AM April 24, 2025 at 8:41 AM, 이석규 매니저 : @김희용 @동현 @KIM SEYEON [김세연]_FA 금일 전극, 조립 물류 sat 잔건 확인은 13시 30분에 진행예정입니다. Foil 창고 이재기부터 진행예정이오니 Foil 창고 앞으로 오시면 됩니다. April 24, 2025 at 8:45 AM, 김희용 : 저는 미팅이 있어 다소 늦을 수 있고, 서동현 PM님이 우선 대응해주실 예정입니다. @KIM SEYEON [김세연]_FA 이반차 FA Punch 대응인원 공유 부탁드립니다 April 24, 2025 at 12:12 PM, 배병민 (Bae Byoungmin) : 금일 오후 양극 코터 4라인, Press#8 bursll⁰t run 진행 계획입니다. 검수진행에 참고 부탁드립니다 April 24, 2025 at 12:13 PM, 김희용 : 일정조율이 필요한 상황일까요? @이석규 매니저 @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA April 24, 2025 at 12:14 PM, KIM SEYEON [김세연]_FA : 내일로 연기 가능할까요? 오늘은 고객도 왔다갔다 할것 같습니다. April 24, 2025 at 12:15 PM, 김희용 : @이석규 매니저 매니저님 금일 오전에 Burst Run이 변경되어 오후 진행 예정인데 혹시 명일 오전으로 일정 조정이 가능할까요? April 24, 2025 at 12:19 PM, 이석규 매니저 : 네 알겠습니다. 명일 오전 10시부터 괜찮으실까요? April 24, 2025 at 12:21 PM, 김희용 : 저는 가능합니다 @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 명일 오전 10:00~ 진행가능 하신지 확인부탁드립니다! April 24, 2025 at 12:32 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 24, 2025 at 12:51 PM, 김희용 : @이석규 매니저 일정변경 양해해주셔서 감사합니다 명일 10시부터 진행하시지요 매니저님! April 24, 2025 at 1:00 PM, 이석규 매니저 : 넵 알겠습니다. 명일 뵙겠습니다. April 24, 2025 at 2:37 PM, 김희용 : @KIM SEYEON [김세연]_FA @이승엽 금일 준공미팅 진행 하실까요? April 24, 2025 at 2:38 PM, KIM SEYEON [김세연]_FA : 내일 16시에 진행하겠습니다. April 24, 2025 at 3:13 PM, 김희용 : 예 알겠습니다. @이승엽 매니저님 준공 Punch 업데이트 본은 금일 공유 주실 수 있을까요? April 24, 2025 at 3:25 PM, 이승엽 : 네 알겠습니다 April 24, 2025 at 8:49 PM, KIM SEYEON [김세연]_FA : Photo April 24, 2025 at 8:50 PM, KIM SEYEON [김세연]_FA : @이승엽 @최대운매니저님 NC AN 4-3에서 AGV 6호기가 풀매거진 뜨다가 매거진 전도 발생했습니다. 명일 점검후 결과 공유 부탁드립니다. April 24, 2025 at 8:55 PM, 최대운 : 네 알겠습니다. 확인 하겠습니다. April 24, 2025 at 9:06 PM, 이승엽 : 에 알겠습네다 April 25, 2025 at 6:27 AM April 25, 2025 at 6:27 AM, KIM SEYEON [김세연]_FA : Photo April 25, 2025 at 6:28 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 출근하시면 1F VD AN 전창고 포트 자동 기동 안되는 이유 확인 부탁드립니다. 새벽 2시경부터 안되었다고 하고, 야간에 법인의 별도 CS인원은 없었습니다. April 25, 2025 at 8:57 AM, 문진영 : 1F VD 포트 정상화 했습니다. April 25, 2025 at 9:19 AM, 이승엽 : @KIM SEYEON [김세연]_FA @김희용 PM님. 금일 예정된 SAT 펀치점검을 10시 --> 오후 1시반으로 변경하여 진행하고자 합니다. 사유는 노칭 GF 상공데크 비가동 작업과 겹쳐서 부득이하게 시간을 조정하게 되었습니다. April 25, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 25, 2025 at 9:31 AM, 문진영 : 원인은 크레인 포킹 중 누군가 매뉴얼 전환해서 인터페이스 중단되면서 해당 포트 TR 신호가 지속 살아 있어서 오토 전환이 안되었습니다. 크레인 정상화 조치 시 SCS에서 해당포트 에러 리셋 버튼 눌러서 TR 신호도 리셋해주셔야 합니다. 작업자 조치 시 참고 바랍니다. April 25, 2025 at 9:39 AM, 김희용 : 변경된 시간으로 진행 하겠습다 매니저님 April 25, 2025 at 10:05 AM, 최대운 : 현장에서 확인 해본결과, 4-3만 발생하는 이유가 바닥 편차가 있어 그로 인해 발생이 되는것 같습니다. 다행히 AGV 주행시 티칭 된곳에 정위치 하게되면 문제가 발생안하는데 때마침 편차가 있는곳에 정위치 하게 되면 ODSL값이 변함으로 포킹 등이 변경될수 있습니다. 100프로 바닥 문제라고는 볼수 없지만 영향이 있는것 같습니다. 금일 좀 더 지켜 볼 예정입니다. April 25, 2025 at 11:25 AM, 배병민 (Bae Byoungmin) : @이철훈_CIM_SKCC 매니져님 안녕하세요 전안부터 모듈 1F 8라인 샘플생산중입니다 모듈 투입/배출쪽 AGV가 특정노드등에 진입시 ACS와 통신이 두절되어 다시 잘안붇고 있습니다 April 25, 2025 at 11:25 AM, 배병민 (Bae Byoungmin) : AP통신 관련 업데이트를 해야하는 부분이 있을까요? April 25, 2025 at 11:39 AM, 이철훈_CIM_SKCC : 배병민pm님 점검순서 1. 해당구역의 AP가 정상상태인지 확인(육안) 2. 인프라/보안에 해당 AP 네트웍연결 및 NAC 관련 확인 3. 위 1.2항 정상시 전극조립확인했던 것처럼 채널중첩등 확인이 필요할거 같습니다. April 25, 2025 at 11:41 AM, KIM SEYEON [김세연]_FA : @이철훈_CIM_SKCC 매니저님 1번 2번은 저희가 하겠습니다. 3번은 sk c&c에서 해주셔야 합니다. April 25, 2025 at 11:45 AM, 배병민 (Bae Byoungmin) : 오래안쓰다 가동한 호기라 2번일꺼 같습니다 April 25, 2025 at 11:51 AM, 이철훈_CIM_SKCC : Photo April 25, 2025 at 11:51 AM, 이철훈_CIM_SKCC : 위 빨간색 정보 기준 확인해 주시면 될거 같습니다. April 25, 2025 at 12:06 PM, 연해리 : 특정 노드에서 AP 끊기는 현상이 있어서 우선 NAC 해제 요청은 다시 올렸고, 현장에서 신호 강도, 중첩 확인 부탁드립니다 April 25, 2025 at 12:10 PM, 배병민 (Bae Byoungmin) : PM님 요건 금일 승인까지 가능할까요? 주말에 계속 샘플생산 예정되어있습니다. @이철훈_CIM_SKCC 그리고 추가적으로 AP가 두절되는 구간이 AGV와 AP간 거리가 먼것이 특이점입니다. 수동으로 다른 노드 이동하면서 재통신 연결하고있습니다 April 25, 2025 at 12:43 PM, 연해리 : NAC 관련 부분은 금일 중 진행가능하도록 부탁드려보겠습니다 April 25, 2025 at 12:44 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 AP관련 모듈 점검될수 있도록 협조 요청드립니다. AP관련 점검 및 조정할 수 있는 메뉴얼은 제공되었나요? April 25, 2025 at 12:47 PM, 이승엽 : - 기존에 담당자가 있을 때 확인 요청이 접수가 되지 않은 상황에서 현재 담당자도 없는 시점이라 점검 진행은 어렵습니다. - 관련 매뉴얼은 확인해 보도록 하겠습니다 April 25, 2025 at 12:57 PM, 이승엽 : 김상훈M가 이전에 송부드린 03/24 메일 (화성/모듈 AP 설치정보), 그리고 01/31 메일 (AP 관련 Siemens 조치 Manual에 대한 정보 포함) 참고 부탁 드립니다. April 25, 2025 at 12:59 PM, KIM SEYEON [김세연]_FA : 메일 송부드렸습니다. April 25, 2025 at 1:02 PM, 이승엽 : 첨부 파일이 열리지 않습니다. AP in Detail April 25, 2025 at 1:10 PM, 동현 : @이승엽 @이석규 매니저 안녕하세요 SAT 물류 펀치관련 1시반에 Foil 창고쪽에서 뵈면 될까요? April 25, 2025 at 1:11 PM, 이석규 매니저 : 네 13시 30분 포일창고 이재기 앞으로 오시면 됩니다 April 25, 2025 at 2:49 PM, 최대운 : @KIM SEYEON [김세연]_FA 보안동 G층 왼쪽에 비밀번호 누르고 사용하는 사물함이 있습니다. 보안동 담당자한테 고정으로 하나만 쓸수 있게 얘기만 해주시면 노트북 여기에 두고 사용하도록 하겠습니다. April 25, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 25, 2025 at 3:48 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 준공미팅 금일 16시10분 행정동GF서 하겠습니다. April 25, 2025 at 3:48 PM, 이승엽 : 네 알겠습니다 April 25, 2025 at 4:03 PM, 김희용 : @KIM SEYEON [김세연]_FA @이승엽 제가 지금 팀장님과 미팅이 길어지고 있어서 조금 늦게 참석할 것 같습니다. April 25, 2025 at 4:04 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 25, 2025 at 4:48 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF 노칭 음극 4-3호기 배출부 왼쪽포트쪽 바닥 단차로 AGV ODSL 값을 잘못 불 우려가 있고 그로인해 전도 발생할 수 있습니다. 그래서 PLC 프로그램을 통해 4-3 배출부 왼쪽편 막아두었으니 참고 바랍니다. 제조측에서 오해 할수 있으니 사전공유 부탁드립니다. (PLC 초기화작업 할 일은 없으시겠지만 하게 되면 막아놓은게 풀리게 되니 유의 바랍니다. ) April 25, 2025 at 4:55 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. April 26, 2025 at 10:54 AM April 26, 2025 at 10:54 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 혹시 시너스텍 제어 출근하신 분이 계시면 음극 프레스 8호기서 잠깐 볼수 있을까요? April 26, 2025 at 10:59 AM, 문진영 : 지금 시너스텍 제어쪽 출근 인원이 없어 방혁PM님과 유선 상 대응하려고 합니다. EQ 원점 변경에 따른 지속 대응이 어려움이 있는 점 양해부탁드립니다. April 26, 2025 at 11:00 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. April 26, 2025 at 11:08 AM, 최대운 : 전일 다른 작업자 분이 잘못 건드렸는지, 4-3 오른쪽도 이동이 안되고 멈추어 운영을 위해 어쩔수 없이 4-3왼쪽 포트 원복하여 다시 사용하게 했습니다. 차주 월요일 재확인하여 왼쪽을 막아두도록 하겠습니다. April 26, 2025 at 11:09 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. April 28, 2025 at 12:41 AM April 28, 2025 at 12:41 AM, 김희용 : @이승엽 매니저님. 지금 GF 양극 릴창고 + 슬리터 -> 릴창고 구간 Lifter가 가동이 안되는 상황입니다. 원인을 못찾고 있어서 혹시 늦은 시간이라 가능할지 모르겠지만 CIM으로 원격이라도 현상확인이 가능할까요? Error는 없고 Job쌓여있고 가동이을 안하는 상태입니다 양극릴창고 + Lifter 구간(슬리터쪽) April 28, 2025 at 12:43 AM, 김희용 : 필요시 제가 웨벡스로 Cim띄워드리겠습니다. 현장에는 이주봉 피엠님이 계십니다. April 28, 2025 at 1:01 AM, 이승엽 : 네. 지금 한국의 김상진 차장님과 comm. 중입니다. 이시간에 생각나는 분이 거기 밖에 없네요 April 28, 2025 at 1:02 AM, 김희용 : 말씀주시면 제가 웨벡스로라도 상황 보여드릴 수 있도록 하겠습니다 April 28, 2025 at 1:05 AM, 이승엽 : 현재 동일한 상황을 김상진 차장도 원격 확인 중입니다. April 28, 2025 at 1:11 AM, 김희용 : @이승엽 @이주봉PM LEE JUBONG(FA) SCS는 만지다보니 지금 시너스텍 포트 문제가 있는거 같습니다 창고내 RACK TO RACK은 변경해주니 반송합니다 April 28, 2025 at 1:12 AM, 이승엽 : 클리어 되었는지요? April 28, 2025 at 1:12 AM, 김희용 : 클리어는 아니고 제가 April 28, 2025 at 1:12 AM, 김희용 : 하나하나 일단 방송하게 April 28, 2025 at 1:12 AM, 이승엽 : 네 감사합니다. April 28, 2025 at 1:14 AM, 이승엽 : 김상진 차장과도 더블체크 해 보겠습니다. April 28, 2025 at 1:15 AM, 김희용 : 조작중입니다. April 28, 2025 at 1:32 AM, 김희용 : @이승엽 릴창고 #1의 창고 측면 Port 트랙번호 8119 Port에있는 Port 반송이 일단 안되는 상황입니다. (8119 시너스텍 Port -> 60017 SMC Port 반송 무반응) 하나하나 반송해보면서 안되는반송들 찾고 있습니다. April 28, 2025 at 1:34 AM, 이승엽 : 시너스텍 쪽 확인 내용도 공유 드리면 먼저 문제가 되어 보이는 화물에 목적지 값이 작업자에 의하여 삭제되어 있어서 입력하도록 하겠습니다. April 28, 2025 at 1:35 AM, 이승엽 : 상기 내용도 공유하였습니다 April 28, 2025 at 1:35 AM, 조수형팀장 SKO/FA운영팀 : @김희용 @이승엽 릴창고가 연이어서 문제를 일으키네요, 비가동이 길어지지 않도록 질 좀 처리 부탁 드립니다!!! April 28, 2025 at 1:35 AM, 김희용 : 예.부탁드립니다. 그 옆쪽에 E0STKC52와 연결된 부분은 문제없어보이는데 반송을 동일하게 안하고 있었어서 그부분도 한번 확인요청 부탁드리겠습니다 April 28, 2025 at 1:58 AM, 김희용 : @조수형팀장 SKO/FA운영팀 릴창고는 일부포트 제외 정상화되어 빠르게 Command 처리 중에 있고 Lifter도 1개호기는 정상화 완료 되어 방금 방송 시작하였습니다 April 28, 2025 at 2:03 AM, 조수형팀장 SKO/FA운영팀 : 원인과 조치 과정 정리해 주십시오. 근본원인 해결이 필요한 부분도 있다면 정리합시다. April 28, 2025 at 2:04 AM, 이주봉PM LEE JUBONG(FA) : 리프트는 정상 작동 되게 조치는 되었습니다. April 28, 2025 at 2:09 AM, 김희용 : @이승엽 공트레이 공급하는 부분 Bridge CNV에서 아직 8058 Track에서 움직이지 않고 있는데 확인이 기능할까요? (에러없고, 목적지 설정되어있으나 미구동) April 28, 2025 at 2:10 AM, 김희용 : 구동시작했습니다 April 28, 2025 at 2:19 AM, 김희용 : 공트레이 공급 리프터에서 (8046트랙) 신호없이 미구동중입니다... April 28, 2025 at 2:30 AM, 김희용 : @이승엽 해당부분 확인 부탁드리겠습니다 매니저님 April 28, 2025 at 2:39 AM, 이주봉PM LEE JUBONG(FA) : This message was deleted. April 28, 2025 at 3:49 AM, 김희용 : @이승엽 @문진영 양극 Slitter 쪽 공트레이 공급 Lifter 아침에 시너스텍 제어 담당자 점검될 수 있도록 부탁드립니다. (CCS 트랙넘버 8046) Lifter에서 공트레이가 멈추어있고, 뒷단 진행이 안되는 상태입니다. Cim Data 기준으로는 문제 없는상태 입니다. (시너스텍 김상진 차장 원격확인) April 28, 2025 at 4:52 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 아침에 시너스텍 제어인원 출근하면 빠르게 양극 슬리터쪽에서 점검할수 있도록 지원 부탁드립니다. April 28, 2025 at 5:39 AM, 최태영 : fyi 국내에서 반송 우선순위 수정. MNL로 공트레이 반송했었고 지금은 모니터링만 하고있습니다 April 28, 2025 at 7:12 AM, 문진영 : 네! 오전 출근하는데로 점검하겠습니다. April 28, 2025 at 7:42 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 저희 ccs쪽 컨베이어는 plc에 코멘트가 없다고 합니다. 어제도 지석범pm이 있었는데 확인이 어려웠습니다. 코멘트포함된 프로그램 금일 중 전부 전달 부탁드립니다. April 28, 2025 at 7:43 AM, KIM SEYEON [김세연]_FA : 점검인원이 @Jun(정우준)_SKOH FA 피엠님 에게 연락할수 있도록 해주세요. 현장서 설명드리겠습니다. April 28, 2025 at 7:52 AM, 문진영 : 혹시 현장에서 PLC 수정도 하고 계신건가요? 전에도 해당 공정은 아니나 말없이 수정을 했던 적이 있어서요. 코멘트 누락된 부분은 보완 후 금일은 어렵더라도 최대한 빠르게 제출하겠습니다. April 28, 2025 at 7:52 AM, 문진영 : 네. 알겠습니다. April 28, 2025 at 7:53 AM, KIM SEYEON [김세연]_FA : 수정은 안하고 있습니다. 하지만 어제같은 오류가 발생하면 문제해결은 될수있게 하고 공유드리면 되지 않을까 싶습니다. 야간에 시너스텍인원이 오는것도 아니니까요. April 28, 2025 at 8:04 AM, 문진영 : 네! 알겠습니다. April 28, 2025 at 8:11 AM, KIM SEYEON [김세연]_FA : 감사합니다. April 28, 2025 at 10:02 AM, 문진영 : @KIM SEYEON [김세연]_FA PM님 슬리터 리프트 정상화 완료했습니다. 1. 최초 리프트 미스매치 에러 조치 시 작업자가 리밋 센서를 조정한 듯 합니다. (리밋 알람 상태에서 매뉴얼 상태에서 다운 리밋 알람 지속 발생되어 수동 조작이 아닌 리밋 센서 조정 작업하신 듯 한데 해당 작업자 사유 확인 필요.) 2. 누군가 리프트 포지션 에러 미사용 모드로 전환하여 이전 도그 센서 정위치 로직 및 포지션 알람 미발생. - 해당 기능 작화에서 삭제함. (2차 권한 기능이였음) 3. 금일 오전 정우준PM님과 싸이클 스탑 시 상승 리밋 위치까지 이동하는 부분 수정 완료. (어제 발생한 다운 리밋은 정상 동작 조건으로 어제 발생 상황과 다름) April 28, 2025 at 10:05 AM, 문진영 : 추가로 변경 안하셨다 했는데 2시 3분경 누군가 인터락 조건 관련 PLC 로직도 수정하였습니다. April 28, 2025 at 10:35 AM, KIM SEYEON [김세연]_FA : 전화드리겠습니다. April 28, 2025 at 7:07 PM, 배병민 (Bae Byoungmin) : @이철훈_CIM_SKCC @이연수 매니져님 안녕하세요 금일 코터 음극 2라인 가동시 AGV 정상 auto 상황에서 RW#2 이재기가 버퍼에 Roll을 정상적으로 올려두고 ACS job이 생성이 안되는 현상이 발생되었습니다. Playback 확인시 음극 2라인 코터 RW#2 17시41분경 버퍼 Roll 적재 17시 54분경 까지 ACS job 생성 안되어 이재기 manual 전환 해당 부분 확인 가능 하실까요? April 28, 2025 at 7:09 PM, 배병민 (Bae Byoungmin) : RW#1 Roll은 AGV 정상 반송 진행 완료 April 28, 2025 at 7:37 PM, 이철훈_CIM_SKCC : 확인해 보겠습니다 April 28, 2025 at 7:53 PM, 이철훈_CIM_SKCC : Photo April 28, 2025 at 7:54 PM, 이철훈_CIM_SKCC : @배병민 (Bae Byoungmin) 해당 시간대에 Node162 - Node 134 진입구간이 막혀있어 Order가 대기상태였습니다. April 28, 2025 at 7:55 PM, 이철훈_CIM_SKCC : CS팀에 접수되어 해당 세그먼트 금지 풀어서 사용 가능토록 하였음을 확인 했습니다 April 28, 2025 at 8:02 PM, KIM SEYEON [김세연]_FA : 누가 막었는지도 확인이 가능할까요? April 28, 2025 at 8:02 PM, 배병민 (Bae Byoungmin) : 네 확인 감사드립니다. 누군가 해당 노드를 Disable 했다는 거네요... April 28, 2025 at 8:03 PM, 이철훈_CIM_SKCC : 확인해. 보겠습니다 April 28, 2025 at 8:06 PM, 이철훈_CIM_SKCC : acsa개정으로 17일 목요일 20시에 설정되었습니다. April 29, 2025 at 12:42 AM April 29, 2025 at 12:42 AM, 지석범PM (이반차FA) : 1. Error time: 최종 00:37 2. Process, machine: GF AN Slitter 1line(E1SLA010-TR01) 3. Error name: [GROUP01 UNIT01] T-AXIS POSITION DETECT SENSOR ERROR[F01175] [GROUP01 UNIT01] Y-AXIS POSITION DETECT SENSOR ERROR[F01173] 4. Error fixed at: 5. Work process:이재기 가동 중단 6. EQ 설비 내부 진입 후, 90도 턴 위치 감지 센서 미감지 - EQ 설비 진입 각도 0도 EQ 설비 내부 진입 후, 진입 위치 센서 미감지 - 센서 도그 아예 없음(전 호기 동일) 로직상 불합리한 포지션 센서 로직 관련한 부분을 임시로 막아놓은 C11접점으로 인해 가동 불가 상태입니다. - 1라인 c11=off - 2라인 c11=on April 29, 2025 at 6:29 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 상기 내용 금일 주간에 법인과 확인 부탁드립니다. 야간에 AN SLITTER1호기는 상기 에러로 가동중단후 수동으로 전환하였습니다. (법인에서는 지석범PM이 확인했지만 조치 못했습니다.) April 29, 2025 at 6:42 AM, 이승엽 : 네 확인하도록 하겠습니다 April 29, 2025 at 6:45 AM, Baek Hojong(백호종)FA : 매니져님 담당자분 정해 지시면 저에게 연락주시고 현장에서 같이 점검할수 있게 부탁드릴께요 April 29, 2025 at 8:06 AM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 분체 AGV 사용 가능 여부 금일자로 한번더 확인 부탁드립니다. ㄴ분체 양음극 1.2.3호기 ㄴ분체 양극 4호기 April 29, 2025 at 8:11 AM, 최대운 : 분체 1-3호기는 모두 사용 가능합니다. 양극 4호기는 스테이션 완료 재티칭 작업 시 주행 점검이 필요하다고 말씀드렸습니다. April 29, 2025 at 8:28 AM, 이승엽 : @KIM SEYEON [김세연]_FA PM님. 지난 주 금요일 리뷰 진행한 준공잔건 리스트 업데이트본 송부 부탁 드립니다. April 29, 2025 at 8:29 AM, KIM SEYEON [김세연]_FA : 네 오전까지 정리하여 드리겠습니다. April 29, 2025 at 8:49 AM, 김희용 : @이승엽 @KIM SEYEON [김세연]_FA 9시에 Daily Alarm 미팅 있습니다 April 29, 2025 at 8:50 AM, 이승엽 : 네 알겠습니다 April 29, 2025 at 8:50 AM, KIM SEYEON [김세연]_FA : 죄송합니다만 전회의가 늦어져 조금 늦을것 같은데 9시15분부터 가능할까요? April 29, 2025 at 8:50 AM, 김희용 : 9시 15분에 시작하도록 하겠습니다 April 29, 2025 at 9:15 AM, KIM SEYEON [김세연]_FA : 먼저 진행 부탁드립니다. April 29, 2025 at 11:13 AM, Baek Hojong(백호종)FA : @이승엽 매니져님 죄송한데 음극 롤창고 이재기 및 크레인 메인트모드이던데 혹시 씨너스택 혹은 SMC 작업이 있는지 확인한번 부탁드릴께요 April 29, 2025 at 11:14 AM, Baek Hojong(백호종)FA : 음극 롤창고 3호기입니다 April 29, 2025 at 11:28 AM, 문진영 : 음극 롤창고 3호기는 양극 릴창고 주행드라이버 에러 개선을 위해 최근 문제된 레이저 거리센서 통신 케이블을 스왑하여 화물 비우고 비가동 중입니다. April 29, 2025 at 11:30 AM, 문진영 : 현재 케이블은 법인 통해 받았고 dsub 커넥터는 국내에서 공수하여 5월 초에 조치 예정이오니 참고 부탁드립니다. April 29, 2025 at 1:03 PM, 전준모 : @김희용 금일 AGV SAT Punch 잔건 점검 실시 예정입니다 장소 : 1F NC 음극에서 시작 시간 : 14:00 현장에서 뵙겠습니다 감사합니다 April 29, 2025 at 1:59 PM, 김희용 : 곧도탁합니다 April 29, 2025 at 2:01 PM, 김희용 : @배병민 (Bae Byoungmin) 엘베고장이네요 April 29, 2025 at 9:13 PM, 김희용 : @최대운 연락드린 내부 전원차단 어떻게되는지좀 확인부탁드립니다 GF 음극 NC 1번 AGV 충전기 차저 내부 변압기 상단 단자대에서 케이블 및 단자대가 녹아서 소손되었습니다. 해당 차저는 acs상에서 Disable 하도록 하겠습니다. April 29, 2025 at 9:18 PM, KIM SEYEON [김세연]_FA : 내부 전원차단 했고, 외부 UT전원도 차단했습니다. April 29, 2025 at 9:19 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 원인 확인 부탁드립니다. April 29, 2025 at 9:19 PM, 이승엽 : 네 확인 중입니다 April 29, 2025 at 10:12 PM, KIM SEYEON [김세연]_FA : Photo April 29, 2025 at 10:12 PM, KIM SEYEON [김세연]_FA : @이철훈_CIM_SKCC 매니저님 AGV 최소충전 로직 추가가 뭔가요? April 29, 2025 at 10:15 PM, 이철훈_CIM_SKCC : Agv가충전 하러 갔다가 바로 잡을 수행 하러 가는 케이스가 있어 충전하러 들어가면 최소 충전 시간을 가질수 있도록 하기 위해 로직을 추가 하였습니다. April 29, 2025 at 10:16 PM, KIM SEYEON [김세연]_FA : @이철훈_CIM_SKCC @이연수 ACS VD에서 화물을 뜨고 화물이 AGV에서 UNK로 바뀝니다. 그리고 VD에서 화물은 사라지지 않습니다. GF VD AN 4월29일 17시53분48초부터 AGV 9호기 플레이백 봐주세요. April 29, 2025 at 10:20 PM, 이철훈_CIM_SKCC : 네 알겠습니다. 내일 아침에 바로 확인해 보겠습다 April 30, 2025 at 8:58 AM April 30, 2025 at 8:58 AM, 심진영(Shim) : 금일 16시 Alarm대응 daily 미팅 참석 부탁드립니다. @KIM SEYEON [김세연]_FA @이승엽 @동휘 Donny April 30, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 30, 2025 at 8:58 AM, 김희용 : @심진영(Shim) 10분만 늦게시작할수 있나요 April 30, 2025 at 8:59 AM, 심진영(Shim) : 네, 알겠습니다 April 30, 2025 at 9:08 AM, 이철훈_CIM_SKCC : 문의하신 내용 확인 내용 공유 드립니다. 1. AGV 인플레이스 알람 발생 2. 작업자 명령 삭제 후 수동작업으로 화물 AGV로 이동 3. ACS는 화물데이터를 못받은 상태에서 AGV에 화물감지가 되어 UNK로 생성 4. ACS 이적재 명령 후 AGV에 화물이 생겨야 해당 포트의 화물이 이동했다고 판단하고 ACS화면에서 화물을 지움. 문의하신 사항은 VD설비와 ACS간 통신으로 해당포트에 화물의 유무를 알수 없기에.. 5. 수동작업으로 해당포트의 화물 제거시 ACS화면에서 "Remove Carrier" 작업 수행 필요. 감사합니다. April 30, 2025 at 9:08 AM, 이철훈_CIM_SKCC : Photo April 30, 2025 at 9:22 AM, KIM SEYEON [김세연]_FA : @이승엽 @최대운 매니저님 인플레이스 에러를 줄여주세요. April 30, 2025 at 9:37 AM, 최태영 : 이철훈 매니저님 혹시 c-1 c-3 일선대응 메뉴얼에 포함된 내용이랑 같은건가요 April 30, 2025 at 9:37 AM, 최태영 : Cim부분 작업지도서요 April 30, 2025 at 9:39 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 조립1F 노칭에 ACS 링크 타임오버 에러 다발합니다. 조치 부탁드립니다. April 30, 2025 at 9:40 AM, 이철훈_CIM_SKCC : C1 C3 내용좀 확인하구 말씀 드릴게요 April 30, 2025 at 9:42 AM, 이승엽 : 네 확인해 보겠습니다 April 30, 2025 at 9:46 AM, 김희용 : @Kim Dongju(김동주)_FA 피엠님 혹시 어제 충전기 소손 현장 사진좀 받을 수 있을까요? April 30, 2025 at 9:58 AM, Kim Dongju(김동주)_FA : 제 자리세서 필요하신 사진 같이 확인 후 보내드리게습니다. April 30, 2025 at 9:59 AM, 김희용 : 옙 피엠님 자리로 가도록 하겠습니다 April 30, 2025 at 1:30 PM, 이승엽 : PM님 이부분은 CS 에 접수가 되었는지요? CS에서는 따로 연락을 받은 것이 없다고 해서 문의를 드립니다. April 30, 2025 at 3:34 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF 노칭 소손된 충전 내 파츠를 우선 1F 전극롤용 충전기에 있는 파츠를 이용하여 살려도 되는지 확인 부탁드립니다. April 30, 2025 at 3:35 PM, 김희용 : 예 진행브탁드립니다. April 30, 2025 at 3:47 PM, 최대운 : 명일 진행하겠습니다. 진행전 공유 드릴수 있도록 하겠습니다. April 30, 2025 at 5:34 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 명일 1F NC 양극 장폭 Roll 충전기 Hook up No : E-P-SF-193 입니다. May 1, 2025 at 7:18 AM May 1, 2025 at 7:18 AM, KIM SEYEON [김세연]_FA : 유티에 신청했고 전원 차단 완료후 공유 드리겠습니다 May 1, 2025 at 8:06 AM, 최대운 : 네 완료 되면 바로 진행하겠습니다. May 1, 2025 at 8:32 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일부터 OI TAS를 참고하여 알람 개선 작업을 진행하겠습니다. 1. 시작전 점검하는 알람 내용은 공유 드리지만, 포인트/호기 등은 당일 끝나는 시점에 공유 드리겠습니다. 2. 일별 수행한 작업 내용은 자체 정리 예정이고, 정리된 자료는 매일은 어렵더라도 수시로 공유 하겠습니다. (정리 방안은 고민 해보겠습니다. ) - 알람 기준: 4/21~4/30 일 기준 3. 금일은 전극동 진행하겠습니다. - ACS EMERGENCY 관련하여 진행하겠습니다. - 창고동쪽은 예전부터 말씀드렸듯이 바닥 문제가 많이 크다고 봅니다. 조치 이후 부터는 더이상 점검은 어렵고 자체적으로 바닥 등과 고려하여 점검 부탁드립니다. - 다른 영역에 대해서는 점검하면서 이슈가 있으면 공유 드리겠습니다. May 1, 2025 at 8:48 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 전극롤 음극 18호기 사용하는 호기였는데, 현장 와보니 안테나가 부러져 있고, 라인에서 아웃 시켜져 있네요. 참고 바랍니다. May 1, 2025 at 8:52 AM, 배병민 (Bae Byoungmin) : 매니져님 안녕하세요 금번 코터 추가 투입호기들도 한번 확인 부탁드립니다. 특히 양극 코터 22호기가 노드를 이탈하는 부분이 발생되어 생산테스트에서 제외한 부분입니다. May 1, 2025 at 8:57 AM, 최대운 : 차례대로 진행 예정입니다. 제외된호기면 당장은 못하고 진행시에 말씀드리겠습니다. May 1, 2025 at 8:59 AM, 배병민 (Bae Byoungmin) : 넵 감사합니다 전극 점검시 저희에게 알려드릴 사항등이 필요하시면 제가 현장가서 같이 대응 하겠습니다. May 1, 2025 at 9:03 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @배병민 (Bae Byoungmin) 현재 전극롤 음극 15호기 이동 중인데, 작업자 분이 수동 대차로 AGV 범퍼를 박아 범퍼 내에 있는 회로가 손상된거 같습니다. 원래는 살려서 투입 할려고 했으나 안되서 보고 드립니다. (Front) 현재는 자체 점검 가능하도록 중간통로(프레스 7-4사이)로 라인 아웃 시키겠습니다. May 1, 2025 at 9:13 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 1, 2025 at 10:04 AM, KIM SEYEON [김세연]_FA : Photo May 1, 2025 at 10:05 AM, KIM SEYEON [김세연]_FA : 완료되었으니 충전기 리커버리 진행 부탁드립니다. 원인분석을 통해 점검 아이템을 찾아서 전수점검도 진행부탁드립니다. May 1, 2025 at 10:15 AM, 최대운 : 네 감사합니다. May 1, 2025 at 10:39 AM, 최대운 : 현코 코터 음극 AGV 통로에 큰 드럼통이 있어 AGV가 계속 장애물 감지 하고 있는데, 아무도 조치 하지ㅜ않고 있어 그자리에 메뉴얼로만 돌려 놓겠습니다. 나중에 사용이 필요하시면 오토 하시면됩니다. May 1, 2025 at 10:43 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 1, 2025 at 12:54 PM, 최대운 : GF NC 충전기 변압기 교체 완료 했습니다. 전원이 들어 오지 않아 Test 는 진행 하지 못하였습니다. TURN ON 하면 연락 주십시요. 확인해보겟습니다. May 1, 2025 at 1:22 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 1F노칭음극 AGV 3호기가 POSTION INITIAL LOSS 에러로 타 호기 막고있어서 AGV 전부 길막했고, 노칭음극 1시간정도 멈췄습니다. 해당 호기 라인아웃했는데, POSITION INITIAL LOSS 에러 발생 원인과 조치 부탁드립니다. May 1, 2025 at 1:25 PM, 최대운 : 확인은 하겠으나, 문제 발생되고 바로 조치 요청이 접수 되었나요? May 1, 2025 at 1:29 PM, KIM SEYEON [김세연]_FA : 저희가 발견을 못했고, 발견이후 라인아웃 했습니다. 해당호기를 점검 부탁드립니다. May 1, 2025 at 1:32 PM, 최대운 : 네, 원인 등 확인 하고 알려드리겠습니다. May 1, 2025 at 1:33 PM, KIM SEYEON [김세연]_FA : 감사합니다 May 1, 2025 at 1:51 PM, 최대운 : 드럼통 같은거 다 치워서 다시 AGV auto 전환했습니다. May 1, 2025 at 2:40 PM, 최대운 : 보통은 RSL 통신 케이블 접촉이 안좋으면 발생하는 경우가 많습니다. 통신 케이블 재 연결후 정위치 잡으면 되는상황입니다. 현재 3호기 라인 아웃은 안되어 있었습니다. 현재 RSL과 관련된 통신 케이블은 탈거후 재결속 하였고 정상적으로 SCAN 되는걸 확인 했고, 모니터링 했으면 문제 없는것까지 확인 했습니다. May 1, 2025 at 4:15 PM, 최대운 : @KIM SEYEON [김세연]_FA @동현 분체 Station 이동 설치 완료 하였습니다. 금주까지 확인 후 수정이 필요한 부분이 있으시면 알려주십시오. 양음극 1-3호기는 티칭 점검보다 덜 포킹할수 있게 전체적으로 맵수정하겠습니다. 모니터링 후 올라타는 현상이 발샹되면 추가 점검 하도록 하겠습니다. 양극 4호기는 별도 주행점검 하도록 하겠습니다. 주행점검 일정은 확인 후 공유 드리겠습니다. May 1, 2025 at 4:38 PM, 최대운 : 금일 전극롤 음극 위주로 Retry 관련 점검 하였습니다. 1. 음극 창고 2번에 이슈가 많아 점검하였습니다. - 7, 16, 19, 22호기 점검 하였습니다. - 그 중 보정이 필요했던 호기는 22, 19호기여서 보정 후 문제 없는사항 확인 했습니다. 2. 전극코터 1라인 2번째도 점검하였습니다. - 12, 16호기 점검하였습니다. - 지난주 요청하여 이미 보정 작업이 된 호기라 금일은 문제 없었습니다. 상기 내용 정리하여 추후 공유 드리겠습니다. May 2, 2025 at 9:05 AM May 2, 2025 at 9:05 AM, 김희용 : @이승엽 매니저님 혹시 미팅 들어오고 계실까요? May 2, 2025 at 9:14 AM, Kim Dongju(김동주)_FA : @이승엽 @최대운 매니저님 혹시 1F 장폭라인 AGV 점검 완료 하였을까요.. 해당 롤 창고부터 복도까지 릴 적재하려 합니다. 확인부탁드립니다. May 2, 2025 at 9:17 AM, 강기훈 : 장폭롤 AGV 양음극 차주 토요일(5/10)까지 SAT 자체 준비예정이며, 이후 SAT 진행예정입니다 릴적재는 SAT 완료 후 하는것으로 조율 부탁드립니다 May 2, 2025 at 9:18 AM, 강기훈 : @KIM SEYEON [김세연]_FA @김희용 피엠님, GF NC AN AGV CHARGER#1 1차측전원(A-P-SF-17) 턴온 금일 오전 중에 부탁드립니다 턴온 시 공유주시면 동작상태 같이 점검하겠습니다 May 2, 2025 at 9:20 AM, KIM SEYEON [김세연]_FA : 네 May 2, 2025 at 10:04 AM, KIM SEYEON [김세연]_FA : 턴온 완료입니다. 충전기 정상화 후 모니터링 부탁드립니다. May 2, 2025 at 10:15 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일은 전극롤 양극 창고쪽 Retry 문제되는 영역 점검 진행하겠습니다. May 2, 2025 at 10:17 AM, KIM SEYEON [김세연]_FA : 네 May 2, 2025 at 10:18 AM, 김주연 : @조범석 @이철훈_CIM_SKCC 매니저님 오늘 2시반에 하는 미팅 링크 공유드렸습니다. 일정 변경은 필요하실경우 미리 연락주세요 May 2, 2025 at 11:13 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 전극롤 AGV가 창고포트에 도킹하고 나올때 주행동선중 가장 끝라인에 대기 중일때 화물감지센서로 인해 서로 못움직이는 상황들이 발생하고 있습니다. (예를들어 전극음극 창고 3230노드에 대기, 다른 AGV가 3422에서 3212로 나올때 걸림 발생) 그래서 나올때 AGV 후면을 일부 안전센서 조정이 필요합니다. 승인해주시면 조정하도록 하겠습미다. May 2, 2025 at 1:53 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 1. 전극롤 음극 18호기 부러진 안테나 교체하였습니다. 2. 전극롤 음극 15호기 작업자 대차 충돌로 front 범퍼 안되는거 자체적으로 가지고 가서 수리 해보겠습니다. (연해리 pm께 빈출신청함) 혹시 자체 수리가 어려우면 말씀드리겠습니다. May 2, 2025 at 5:36 PM, 이승엽 : @KIM SEYEON [김세연]_FA PM님. 작일 요청드린 변경점 작업 계획 상, 금일 Press/Slitter 이재기 도그센서 수정 작업 문의를 드렸었는데, 승인이 어려우 신건지.회신이 없으셔서 금일 작업 진행을 못했다고 합니다. 차주 월요일부터 생산라인 부분도 도그 수정이 필요하여 비가동이 발생하여 다시 한번 부탁드립니다. May 2, 2025 at 5:37 PM, 이승엽 : Photo May 2, 2025 at 6:16 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 일부 전극롤 구역에서 pos 많이 발생하는 노드 파악하여 조치를 위한 관련 내용을 메일로 공유 드렸습니다. 확인 후 승인해주시면 업데이트 예정입니다. May 2, 2025 at 6:25 PM, 김희용 : 이제야 봤네요 해당부분 저도 보았던 현상입니다. 조정 요청드립니다. May 2, 2025 at 6:26 PM, KIM SEYEON [김세연]_FA : 명일 제가 출근하니 현장서 조율해보겠습니다. May 2, 2025 at 6:28 PM, 최대운 : 화물 감지 조정 안하고 ACS 블럭처리르르조정 할 예정입니다. 관련 메일 드렸습니다. May 3, 2025 at 10:49 AM May 3, 2025 at 10:49 AM, Kim Dongju(김동주)_FA : @이승엽 매니저님 양극 코터1라인 리와인더부 티칭값 점검이 필요한데..지금 이재기 기구 인원 대응 가능 할까요? May 3, 2025 at 10:53 AM, 이승엽 : 점검 사유거 무엇인가요? May 3, 2025 at 10:54 AM, 이승엽 : 티창값 점검인데 기구 인원인가요? May 5, 2025 at 8:50 AM May 5, 2025 at 8:50 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금주부터 9시에 작업사항 리뷰하기로 했는데, 행정동GF에서 하겠습니다. May 5, 2025 at 8:50 AM, 이승엽 : 네 May 5, 2025 at 10:22 AM, KIM SEYEON [김세연]_FA : Photo May 5, 2025 at 10:22 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 혹시 어느분인지 알수 있을까요? May 5, 2025 at 10:23 AM, 이승엽 : 확인해 보겠습니다 May 5, 2025 at 10:25 AM, 이승엽 : 금일 오전 인가요?? May 5, 2025 at 10:27 AM, KIM SEYEON [김세연]_FA : 네 May 5, 2025 at 10:34 AM, 이승엽 : 시너스텍 작업자구요 해당알람은 RTV포지션위치에서 포지션도그가 감지되지않을때 발생하는 알람입니다. 도그감지안되는 원인 확인 중에 있습니다. May 5, 2025 at 10:35 AM, KIM SEYEON [김세연]_FA : 네 작업 완료되면 알려주십시오. May 5, 2025 at 10:43 AM, 최대운 : @KIM SEYEON [김세연]_FA 11시까지 행정동 방문하면되나요? May 5, 2025 at 10:47 AM, KIM SEYEON [김세연]_FA : 버스트런에 문제가 있어서 11시회의 연기 부탁드립니다. 안오셔도 됩니다. 따로 연락드릴게요. May 5, 2025 at 12:21 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 4라인 수동 대차에 버퍼로 가지고 있던것부터 소진 하던데 버퍼로 가지고 있다가 필요할때 사용하고 우선 자동으로 공급된 제품부터 사용해야되지 않나 싶습니다. 결국 오후 5시 이후 또 수동 대차로 빼야되는 상황이 발생될것 같아요. 참고 바랍니다. May 5, 2025 at 12:52 PM, 김희용 : @최대운 매니저님 13시 기점으로 LR /UR Priority 50:50으로 변경하여 진행하려합니다. Time incentive도 0.5 -> 0.1 변경 진행 해보려해서 오후에 Acs에서 변경될 수 있도록 부탁드립니다 May 5, 2025 at 1:31 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 이 부분 대기중인데, 언제 진행하면 될까요? May 5, 2025 at 1:54 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 현재 4라인 자동화로 운영하는 상황이 아니기 때문에 현장 작업자 분들은 철수하고 필요할때 연락 주시면 대응 하도록 하겠습니다. 지금은 현장에 계속 대기 하는게 의미가 없어 보입니다. 필요시 요청사항이 있으시면 대응하겠습니다. May 6, 2025 at 8:01 AM May 6, 2025 at 8:01 AM, 김희용 : @이승엽 @최대운 @KIM SEYEON [김세연]_FA @동휘 Donny 금일 GF ST AGV 관련해서 미팅을 진행하고자하는데 10:30 시간들이 괜찮으실까요? 확인 부탁드립니다 May 6, 2025 at 8:02 AM, 이승엽 : 네 일단 가능하며, 참석하도록 하겠습니다. May 6, 2025 at 8:02 AM, 동휘 Donny : 네 저도 가능 합니다 May 6, 2025 at 8:06 AM, KIM SEYEON [김세연]_FA : 네 참석하겠습니다 May 6, 2025 at 8:07 AM, 김희용 : @이승엽 10:30에 행정동 2F or GF 회의실에서 진행하겠습니다. 회의실은 확정되면 공유드리겠습니다 May 6, 2025 at 8:57 AM, 이석규 매니저 : @동현 @연해리 금일 sat잔건 분체 MCP도면 확인 오후 2시에 확인 예정입니다. 분체 GF 음극으로 오시면 됩니다. May 6, 2025 at 9:01 AM, 최대운 : @김희용 GF stacking 북측 타임인샌티브 0으로 변경 했습니다. May 6, 2025 at 9:02 AM, 이승엽 : 이거 리뷰는 이따 10시에 회의 있으니 그 때 같이 보시면 어떨까요? May 6, 2025 at 9:03 AM, 이승엽 : 오전에 내부 회의 하다 보니 시간이 좀 지났네요 May 6, 2025 at 9:58 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 현 GF Stacking 그룹화로 임시 맵 반영하였기 때문에 최종 결정되시면 알려주십시오. 그리고 대기 위치까지 알려 주시면 대기위치에 대기할수 있도록 하겠습니다. 현재는 그룹화로 ACS상으로 대기 위치 지정하더라도 반영이 안될겁니다. May 6, 2025 at 10:26 AM, 김희용 : @이승엽 매니저님 행정동 2F 지타에서 미팅진행예정입니다! May 6, 2025 at 2:00 PM, 김희용 : @이승엽 행정동오시면 알려주십시오 매니저님 May 6, 2025 at 2:00 PM, 김희용 : @이승엽 행정동오시면 알려주십시오 매니저님 May 6, 2025 at 2:03 PM, 이승엽 : 왔습니다 May 6, 2025 at 7:58 PM, KIM SEYEON [김세연]_FA : @최대운 @강기훈 매니저님 혹시 분체 AGV 전원 내리신분 계신가요? 양음극 모두 AGV 전원 내려가 있어서요. May 6, 2025 at 8:09 PM, 최대운 : 양음극 모두 2대가 살아 있었으며, 저희쪽에서 off 하지는 않았습니다. May 6, 2025 at 8:09 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 7, 2025 at 7:40 AM May 7, 2025 at 7:40 AM, KIM SEYEON [김세연]_FA : Photo May 7, 2025 at 7:40 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 싸이클스톱 다 완료되었나요? May 7, 2025 at 7:40 AM, KIM SEYEON [김세연]_FA : 상기 판넬 확인 부탁드립니다. May 7, 2025 at 7:54 AM, 김희용 : @최대운 @이연수 GF ST Room 북측 Groupping 5:5 Concept 금일 적용 해보려고 하는데 적용 가능시간 확인을 부탁드립니다 May 7, 2025 at 8:05 AM, 문진영 : 네! 확인하겠습니다. May 7, 2025 at 8:31 AM, 최대운 : 오전 10시 정도 반영하여 적용하겠습니다. 적용시 변경점 관리에 공지하겠습니다. May 7, 2025 at 8:34 AM, 김희용 : 예 알겠습니다 매니저님 감사합니다 May 7, 2025 at 8:40 AM, KIM SEYEON [김세연]_FA : 감사합니다 May 7, 2025 at 8:48 AM, Jun(정우준)_SKOH FA : @심찬울 E0STKC51 SCS 25.05.07 02:05:40~02:06:20 입니다. May 7, 2025 at 8:49 AM, 심찬울 : 예 홛인했습니다 May 7, 2025 at 8:57 AM, 김주연 : @정연동 @이연수 매니저님 9시 회의요청드렸는데요, 지금 앞전 회의가 밀려서 30분 늦춰야할 것 같슺니다. 일정 괜찮으신가요? May 7, 2025 at 9:03 AM, 이연수 : 네 May 7, 2025 at 9:04 AM, 김주연 : @정연동 @이연수 미팅링크 메일로 전달드렸습니다 May 7, 2025 at 9:08 AM, 정연동 : 넵 May 7, 2025 at 9:09 AM, 정연동 : 30분 뒤 미팅 진행하는건가요? May 7, 2025 at 9:10 AM, 문진영 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) PM님 어제 발생한 이재기 SW LIMIT 관련 금일 HMI에서 LIMIT 범위 설정 가능하도록 수정 예정이며 PM님 한분 지정해주시면 수정 후 간단하게 현장에서 교육 진행하도록 하겠습니다. 시간은 확인 후 변경점 방에 공유드리겠습니다. May 7, 2025 at 9:11 AM, 김주연 : 넵 May 7, 2025 at 9:20 AM, 문진영 : 혼선을 드려 죄송합니다. 이재기쪽은 제가 좀더 확인 후 해당 건은 개선 방향 별도 공유드리겠습니다. SW LIMIT 설정 변경 기능은 진행하지 않도록 하겠습니다. May 7, 2025 at 9:23 AM, 정연동 : This message was deleted. May 7, 2025 at 9:24 AM, 정연동 : PM님 미팅 번호 및 비번 공유 부탁드리겠습니다. May 7, 2025 at 9:28 AM, KIM SEYEON [김세연]_FA : 네 이따 말씀 부탁드립니다. May 7, 2025 at 9:47 AM, 최대운 : @연해리 AGV 내 볼트 중 knob bolt 여유분 드릴려고 합니다. 혹시 언제 드릴까요? May 7, 2025 at 9:48 AM, KIM SEYEON [김세연]_FA : @Kim Dongju(김동주)_FA 피엠님에게 전달 부탁드립니다. May 7, 2025 at 9:50 AM, 최대운 : @Kim Dongju(김동주)_FA 현장 오시거나 시간되실때 알려주시면 전달 드리겠습니다. May 7, 2025 at 10:06 AM, 문진영 : 우선 음극 프레스 해당 호기는 현장 확인 시 SW 리밋 범위가 AGV 정위치 범위 확장 전 값으로 되어 있어 40mm로 변경했으며 혹시 필요하신 경우 SW LIMIT 설정값 변경 방법은 FA인원 지정해주시고 저희 심찬울 매니저에게 연락주시면 변경 방법 현장 교육해 드리겠습니다. 다만 해당 건은 인터락 관련 건이기에 최소 인원으로 지정 부탁드립니다. May 7, 2025 at 10:06 AM, 최대운 : GF Stacking 4-5라인쪽 AGV 1-5호기 5-6라인쪽 AGV 6-10호기 2개 그룹으로 적용하였습니다. 모니터링 하시면될 것 같습니다. May 7, 2025 at 10:17 AM, 양원석 : @이철훈_CIM_SKCC @이연수 Vd 미건조 발생으로 acs쪽 분석요청 메일드렸습니다. 금일중 확인가능하실까요? May 7, 2025 at 10:39 AM, 심찬울 : @Jun(정우준)_SKOH FA @KIM SEYEON [김세연]_FA 해당위치 reel stk 양극 51호기 m02포트로 보이는데, 현재 싸이클 스탑 정상동작되고있습니다. Playback보시면 2시05분41초 보시면 포트 전체가 메뉴얼 전환됩니다. 크레인이 포크 접었다고 크레인 동작을 완료한게 아니고 complete를 해야 동작 완료 된건데, complete하기 전에 메뉴얼 전환되서 발생하는 문제입니다. May 7, 2025 at 10:40 AM, Jun(정우준)_SKOH FA : 혹시 현장 이신가요? May 7, 2025 at 10:40 AM, 심찬울 : 예 May 7, 2025 at 10:42 AM, Jun(정우준)_SKOH FA : 현장에서 얘기 할수 잇을까요? May 7, 2025 at 10:42 AM, 심찬울 : 현장에있습니다 May 7, 2025 at 10:51 AM, Jun(정우준)_SKOH FA : 정상작동 확인 했습니다. 감사합니다. May 7, 2025 at 3:40 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일 OI TAS를 활용하여 작업한 내용 공유 드립니다. (메일로 상세 내용 공유 예정) 1. 전극동 - Pos Cont Heading Err, ACS 업데이트 등 금일 업데이트 완료 2. 조립동 - GF VD 인플레이스 알람 최소화를 위해 전담 담당자가 에러 및 필요시 재티칭 점검 진행 중(한동안 계속 현장에서 점검 예정입니다. ) - ODSL 에러 부분은 최소화 하였지만 일부 공차 문제로 발생되는 부분이 있어 매뉴얼로 체크하고 조치 하는 방법을 정리하여 공유 드리도록 하겠습니다. May 8, 2025 at 7:12 AM May 8, 2025 at 7:12 AM, 양원석 : @이연수 매니저님 vd미건조 분석 언제까지 가능하실까요? May 8, 2025 at 7:20 AM, 김주연 : @이연수 오전까지 확인 후 회신부탁드립니다 May 8, 2025 at 8:03 AM, 이연수 : 원인분석은 다 됐고 지금 정리 중입니다. May 8, 2025 at 9:40 AM, 김희용 : @이승엽 @최대운 @KIM SEYEON [김세연]_FA @동휘 Donny 매니저님 GF남측 AGV 주행방향 변경 개선 관련해서 차주 수~ 부터 또 3Line R@R이 있다고 해서 일정조율이 좀 필요하여 금일 13시에 잠시 논의가능하실까요? May 8, 2025 at 9:42 AM, 이승엽 : 네 가능합니다. May 8, 2025 at 9:46 AM, 김희용 : 예 그럼 13시에 행정동 2F 지타에서 뵙겠습니다 May 8, 2025 at 9:46 AM, 최대운 : 네 알겠습니다. May 8, 2025 at 10:47 AM, KIM SEYEON [김세연]_FA : @문진영 @이승엽 매니저님 확인 부탁드립니다. GF AN RTV 리프트 런타임 에러 발생 건 플레이백 시간 : 25.05.08 09:53:06 - 풀 화물을 리프트에 내려 놓는 작업 수행 중 - 데이터는 Car(7050), 리프트(7003)에 중복 - 생성 된 후 런타임 에러 발생. - 트레이 정위치 - Car는 모터 구동 신호 없음 - 리프트 준비 안되었단 에러 같이 올라옴. 해결해야 될 부분 => 리프트 준비가 안됐는데, car에서 먼저 데이터 부터 보내면서 데이터 꼬임. => 리프트 오토 상태이지만 준비 안된 원인 파악 또한 필요함 May 8, 2025 at 11:03 AM, 문진영 : 해당 구간은 일반적인 데이터 트래킹 구간이 아닌 RTV와 LIFT간 인터페이스 구간으로 RTV CV에 BUSY신호 시 리프트쪽에 데이터 쓰고 LIFT로 이동 완료 후 RTV쪽 데이터를 삭제합니다. 혹시 이동 중간 화물 걸림 발생 시 RTV는 런타임 에러, 리프트는 화물 없으면 40초 후 데이터 미스매치 알람 발생해서 화물 이동 조치 후 화물이 없는쪽 데이터는 삭제해주고 리프트 알람 리셋 후 오토전환 이후 RTV 알람 리셋 후 오토 전환해줘야합니다. 다만 해당 최초 발생 에러는 확인해보겠습니다. May 8, 2025 at 11:06 AM, KIM SEYEON [김세연]_FA : 확인부탁드립니다 May 8, 2025 at 11:07 AM, KIM SEYEON [김세연]_FA : @Jun(정우준)_SKOH FA 피엠님 오후에 문진영 매니저님께 현장서 설명 부탁드립니다 May 8, 2025 at 11:07 AM, Jun(정우준)_SKOH FA : 네 알겠습니다. May 8, 2025 at 11:23 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 릴창고 쉐어존 확장 시, 무언정지 발생건 - C51 25.05.05 21:29 - A51 25.05.05 20:44 확인 부탁드립니다. May 8, 2025 at 11:27 AM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 1F 분체 스테이션 가이드 제거하고 제거된가이드 사용할 수 있다고 하셔서 음극은 충전기 옆, 양극은 pallet magazine 내부에 있습니다. May 8, 2025 at 11:31 AM, 이승엽 : 네 확인하도록 하겠습니다 May 8, 2025 at 12:54 PM, 김희용 : SCS에서 명령 안준것으로 확인중으로 체크했습니다 May 8, 2025 at 2:11 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 @문진영 매니저님 변경점 관련해서 어제도 음극 다관절로봇 업데이트 후 문제로 2시간 비가동되었고, 금일은 VD 1F 음극전단 작업후 레디를 안해서 1시간 비가동 되었습니다. 변경점 관리방에 편의상 BP사가 작업올리고, 종료하고 하는데, SKCC에서 작업완료시 확인하고, 변경점 관리방에 완료로 올려주십시오. May 8, 2025 at 2:28 PM, KIM SEYEON [김세연]_FA : Photo May 8, 2025 at 2:29 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 해당 노드 시너스텍에서 확인 가능할까요? May 8, 2025 at 2:31 PM, 이승엽 : 죄송합니다. 향후 이런 일 없도록 잘 챙기도록 하겠습니다. May 8, 2025 at 2:32 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 8, 2025 at 2:36 PM, 최대운 : 우선 에러는 확인 했으며, 조치 후 공유 드리겠습니다. May 8, 2025 at 4:25 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 전극롤 음극 창고쪽 대차, 폐기자재 등으로 AGV가 화물감지로 이동을 못하는 경우가 많습니다. 내부적으로도 전극에 요청하여 가능한 폐자재나 대차 등을 가능한 좁은 공간에 두지 않도록 전달 부탁드립니다. May 8, 2025 at 5:15 PM, 문진영 : 혹시 말씀하신 1F VD 음극 전창고 레디 관련 발생 시간대 좀 알 수 있을까요? 12시40분경 1F 양산방에 올라온 건은 반송 가능 화물이 없는 상황이였는데 그 외 관련 내용 접수 받은게 없어서요. 발생 시간 알려 주시면 확인해보겠습니다. May 8, 2025 at 5:50 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF 조립동 내부적으로(테크니션 포함) 주행 옵셋, 포크 옵셋 값 보정하실 때 주의 부탁드립니다. 금일도 GF 노칭 음극 4호기가 에러가 나서 확인 해보니 옵셋이 전혀다른 반대값으로 들어가 있었습니다. 옵셋 보정했을경우, 모니터링은 필히 부탁드립니다. May 9, 2025 at 4:30 AM May 9, 2025 at 4:30 AM, KIM SEYEON [김세연]_FA : 작업 종료 후 1시간동안 설비 비가동 상태였고 그 때문에 공트레이가 회수물류에서 막혀서 반송가능 자재가 없다고 잡힌 것 같습니다. May 9, 2025 at 7:36 AM, 김희용 : @최대운 매니자님 금일 GF ST AGV 그룹핑 이전 1:1:1:1, 6광역 대응으로 전환부탁드립니다. (보고 후 픽스 예정) May 9, 2025 at 7:37 AM, 최대운 : 네 알겠습니다. May 9, 2025 at 9:48 AM, 최대운 : 그룹핑은 적용 완료 하였습니다. May 9, 2025 at 10:16 AM, 이승엽 : @KIM SEYEON [김세연]_FA PM님. 작일 같이 리뷰 진행한 준공잔건 리스트 송부 부탁 드립니다. May 9, 2025 at 10:17 AM, KIM SEYEON [김세연]_FA : 네 금일중 송부드리겠습니다. May 9, 2025 at 10:27 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 Stacking Buffer Station 운영안 빠른 결정이 필요합니다. 사전에 시스템 개발이 필요한 상황이니 빠른 의사결정 후 회신 부탁드립니다. May 9, 2025 at 10:28 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 차주 화요일에 회신드리겠습니다. May 9, 2025 at 4:06 PM, 김희용 : @이연수 GF VD 음극 후창고 MLA2057 - 오전 07:28분 생성된 메뉴얼 Port(6013)에대한 Unloading Complete 처리가 안되었음 - 현재 C1STKA72 16034(입고 포트)에 MLA2057 입고 대기중 - 이전 MLA2057이대한 Command 삭제불가 - 순환물류 정체 May 9, 2025 at 4:08 PM, 김희용 : Unloading Complete 후 Command 가 남아 있는 현상이 지속 발생하는것 같습니다. (제가 3번정도 목격 및 삭제) May 9, 2025 at 4:31 PM, 심찬울 : unload command 지워지는 정상동작 조건은 후면 포트 끝까지 화물이 나오고 UR비트가 올라왔을때 지워집니다. MLA2057 커맨드가 지워지지 않은 사유는 크레인이 내려놓은 포트에서 포트 데이터지우고 화물을 수동으로 제거해서 발생한 문제입니다. 07시49분에 6033포트 data 임의 삭제 07시51분에 6013포트에서 플레이트 임의 제거 May 9, 2025 at 4:32 PM, 김희용 : 예예 플레이백 방금확인했습니다.! May 9, 2025 at 4:33 PM, 김희용 : @심찬울 잡 남는 것들이 다 수동포트에서 거의다 나겠네요 감사합니다 May 9, 2025 at 4:41 PM, 심찬울 : 예 다른 잡 남은것들은 확인해봐야겠지만 대부분 수동포트에서 남아있을거로 보입니다. 이전 mla2057 잡은 지우고, 정상동작하는거 확인했습니다. May 9, 2025 at 5:07 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일 OI TAS를 활용하여 작업한 내용 공유 드립니다. (메일로 상세 내용 공유 예정) 1. 1F Stacking 남측 AGV 11호기 “Fork1 Overload” 발생 알람 - 티칭 수정값이 잘못 되어 있어 문제되는구간 티칭 재검수 진행 2. 1F Stacking 북측 15호기 ”Travel Motor2 Overload” - 주행 부하율 설정값이 잘못 입력되어 있어서 변경 함 May 9, 2025 at 5:08 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 메일도 확인하겠습니다. May 9, 2025 at 5:10 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 명일 출근하면 GF Stacking 남측 순환 물류 동선 변경 관련 업무를 진행하고지 합니다. ACS 업데이트 변경예정입니다. 명일 생산 없고, 비가동으로 진행함에 있어 문제가 없는지만 재확인 부탁드립니다. May 9, 2025 at 5:57 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 금일 GF Stacking 남측 생산 테스트 하는데 작업자분들이 매거진 위에 매거진 뚜껑을 올려 놓은 상태에서 UR을 눌러서 인플레이스 알람이 다소 발생하였습니다. 조립 담당자분께 뚜껑 제거 후 UR 요청 부탁드린다고 전달 부탁드립니다. May 9, 2025 at 6:08 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 10, 2025 at 9:25 AM May 10, 2025 at 9:25 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금일 스택1.2.3라인 포트쪽 AGV 경로변경 및 AGV 티칭 언제부터 시작하시나요? May 10, 2025 at 9:26 AM, 최대운 : 현재 준비 중입니다. 오전 중 ACS 맥 업데이트 예정입니다. May 10, 2025 at 9:26 AM, KIM SEYEON [김세연]_FA : 네 조립 1.2.3라인만 변경되고 타라인 운영에는 문제 없도록 잘 부탁드립니다. 변경점 방에도 올려주세요. May 10, 2025 at 9:27 AM, 최대운 : 네 알겠습니다. May 10, 2025 at 9:30 AM, KIM SEYEON [김세연]_FA : 매니저님 정말 죄송한데, 잠시만 대기해주실래요? 조립 1라인 연습생산자재를 스택에 좀 실어놓아달라고 하는데, 연락드리겠습니다. May 10, 2025 at 9:36 AM, KIM SEYEON [김세연]_FA : 조립에 확인했습니다. 스택1.2.3라인 변경작업 작업진행 하셔도 됩니다. May 10, 2025 at 9:41 AM, 최대운 : 네 알겠습니다. May 12, 2025 at 8:42 AM May 12, 2025 at 8:42 AM, 김희용 : @이연수 @최대운 GF ST 북측 AGV 그룹핑 지역1-1-1-1 , 광역6 에서 지역 1-2-2-1, 광역4로 변경하여 추가테스트 진행하려하는데 오후에 적용준비 가능할까요? May 12, 2025 at 8:43 AM, 동휘 Donny invited 박태영. May 12, 2025 at 12:09 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 회의 요청드립니다. 슬리터 6호기쪽 컨베이어 변경이 필요해서 견적을 요청드리려고 합니다. 13시반 행정동 괜찮으신가요? May 12, 2025 at 12:10 PM, 최대운 : 1시에 적용 예정입니다. May 12, 2025 at 12:10 PM, 이승엽 : 네 알겠습니다 May 12, 2025 at 1:02 PM, 김주연 : @이승엽 매니저님 행정동 회의 마치시면 이어서 노칭룸 릴창고 수동포트 자동LR 도 논의하면 좋을 것 같습니다. MCS 확인하였을때 LR 올려주는게 없는걸로봐서 자동LR컨셉은 아닌걸로 보여서요 May 12, 2025 at 1:44 PM, 최대운 : @KIM SEYEON [김세연]_FA @동현 @김희용 노칭 양극 자재 이동 건 관련하여 현장 확인이 필요합니다. 메인트용 지그는 법인에 전달드렸는데 여기에 두라고 해서 보관중입니다. 메인트용 지그는 어떻게 하실건지요? 음극 전극과 조립사이 파란색 표시 맞은편 다 사용해도되는지요? May 12, 2025 at 2:26 PM, 동현 : 네네 트레이 카트 파킹 건너편에 소화전, 문 방해안되게해서 놓아주시면 될꺼같습니다. May 12, 2025 at 2:34 PM, 최대운 : 양하고 부피가 커서 차지를 많이 할것 같은데, 파킹카트 맞은편에 두겠습니다. 보관일정은 따로 없는거죠? May 12, 2025 at 2:35 PM, KIM SEYEON [김세연]_FA : 그건 저희도 알수가 없습니다. 다만 보관장소 필요하니 거기에 계속 놓아야겠죠 May 12, 2025 at 2:42 PM, 최대운 : 최대힌 구석에 배치 할 예정인데, 혹시나 정해진 구역이 있는지 싶어 문의 드렸습니다. 메인트용 지그는 별도로 챙기시는게 낫지 않을까요? May 12, 2025 at 2:43 PM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 메인트용 지그를 최대운 매니저님께 받아주십시오. May 12, 2025 at 2:44 PM, Baek Hojong(백호종)FA : 네 알겠습니다 May 12, 2025 at 3:01 PM, 최대운 : 우선 부피가 커서 혼자 이동이 어려울수 있습니다. 명일 BP사 자재 이동 완료하고 메인트 자재가 원래 위치 구석에 두겠습니다. BO사 이동 완료하면 말씀드리겠습니다. May 12, 2025 at 3:36 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일 OI TAS를 활용하여 작업한 내용 공유 드립니다. (메일로 상세 내용 공유 예정) 1. 전극롤 음극 작업자 대차이동 실수로 15호기 범퍼 손상된 부분 수리하고 재설치 완료 하였습니다. 2. GF VD 음극 AGV 8호기 다양한 에러 조치 - 인플레이스가 휘어져 있어 위치 조정하고 조치 완료(조그 이동시 주의 필요) - Z, X축 얼라인 에러—> 조치하시는 작업자 분들이 조치시 원점까지 이동 안시키고 Auto로 전환하다보니 발생한것 같습니다. 그래서 본 AGV는 PLC 원점과 기구 원점이 달라서 발생한 에러로 원점을 새로 맞추고 모니터링 결과 문제 없는거 확인 하였습니다. 매뉴얼 모드에서 조그로 각 축을 조작하다보면(조그에서 화살표로 위치 조정) 기구적 위치와 PLC 표시된 위치가 간혹 달라질 수 있습니다. 작업자가 화살표로 대충 포지션 값을 0에 맞추는 것보다 마지막에origin search 버튼으로 원점을 맞출 May 13, 2025 at 8:46 AM May 13, 2025 at 8:46 AM, 최대운 : @KIM SEYEON [김세연]_FA AGV용 안테나 4개 있습니다. 금일 제공 가능합니다. May 13, 2025 at 8:52 AM, Baek Hojong(백호종)FA : 저한테 주세용 매니져님 May 13, 2025 at 8:55 AM, KIM SEYEON [김세연]_FA : 감사합니다 May 13, 2025 at 8:55 AM, 최대운 : 네, 앞으로 안테나는 자체적으로 관리 부탁드립니다. May 13, 2025 at 8:56 AM, 최대운 : @KIM SEYEON [김세연]_FA @동현 @Baek Hojong(백호종)FA 금일 GF 노칭 양극에 자재 음극 복도 끝으로 오전에 이동 예정입니다. 메인트 자재는 노칭양극 구석에 두겠습니다. 이동 완료하면 공유 드리겠습니다. May 13, 2025 at 8:58 AM, 동현 : 감사합니다 May 13, 2025 at 9:10 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 @송광진PM FA장비unit 분체 전동 대차 6대 이반차 납기가, 05/14 ~ 05/16 사이 입니다, 일정 확정되면 다시 알려 드릴예정이고, 어디에 전달 드리면 되는지 알려주십시오. 반입 전날 반입신고 따로 해야되는거죠? May 13, 2025 at 9:29 AM, 최대운 : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA AGV BCR 프로 파일이 있습니다. 버릴까요? 아니면 별도로 보관하시겠습니까? May 13, 2025 at 9:30 AM, Baek Hojong(백호종)FA : 저에게 주세용 매니져님 May 13, 2025 at 9:38 AM, 최대운 : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA 1. 여기서 사용 가능한 파츠들은 GF 노칭 양극 구석에 두겠습니다. 메인트 자재, 마크플레이트판, CPSFLEX, 공압커버, VD BCR 브라켓 등 추후 가지고 가시면 될 것 같습니다. 2. 일부 필요없는자재는 전극동 밖 쓰레기통에 넣어도 될까요? May 13, 2025 at 9:56 AM, 최대운 : @동현 쓰레기로 버릴 자재가 1pallet 정도됩니다. 현재는 기존 보관쪽에 있으며, 버리곳 알려 주시면 그쪽에 버리겠습니다. May 13, 2025 at 10:26 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 제가 VD BCR설치건 관련 회의 요청을 13시반으로 요청드렸는데 15시반으로 다시 변경 요청드립니다. May 13, 2025 at 10:29 AM, 최대운 : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA AGV용 타워램프도 마지막 새제품 3개 있습니다. 타원램프도 전달 드릴테니 자체 관리 부탁드립니다. 클릭백에 넣어서 가지고 들어갈수가 없네요. 그리고 타워램프는 색깔별로 되어 있어 색깔별로 고장난 색깔만 교체 하시면 추후 다른 색상은 사용할 수 있으니 참고 바랍니다. May 13, 2025 at 10:44 AM, Baek Hojong(백호종)FA : 감사합니다 매니져님 May 13, 2025 at 10:47 AM, 최대운 : 전달을 어떻게 드려야될까요? 클린 가방에 넣을수가 없네요 May 13, 2025 at 10:56 AM, 이승엽 : 네 May 13, 2025 at 11:46 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 현재 1F Stacking AGV 브레이크 2대(Stacking 음극 4호기, VD 양극 1호기)교체 완료 했으며, 음극 Stacking 7호기 1대 남았습니다. 1대 교체시 시연하면서 설명드리고자 합니다. 교육 받을 담당자하고 일정 알려주시면 진행하겠습니다. 금주 진행하면 좋을것 같습니다. May 13, 2025 at 12:43 PM, KIM SEYEON [김세연]_FA : @최대운 5월14일 명일 오전 부탁드립니다. May 13, 2025 at 12:49 PM, 최대운 : 네 명일 오전에 준비하겠습니다. 시간 알려주시면 시간 맞추어 준비 하겠습니다. May 13, 2025 at 3:59 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 전동 대차 6대, 명일 오전 10시 정도에 이반차 도착 예정입니다. 1. 반입 신청 해야되는지? 2. 어디에 인수인계하면 되는지 확임 부탁드립니다. May 13, 2025 at 4:09 PM, 최대운 : @동현 분체 양극 금주 중 생산 안하는 일정이 있을까요? May 13, 2025 at 4:33 PM, 동현 : 반입신청은 @연해리 PM님 앞으로해주시고, 인수인계증 작성하시어 @연해리 PM님께 말씀주시면 전극쪽에 전달 주신다고합니다. May 13, 2025 at 7:46 PM, 최대운 : @KIM SEYEON [김세연]_FA @강기훈 명일 오전 9:30분 1F Stacking에서 진행하고자 하는데 괜찮으신가요? 혹시 누가 참석 예정이신가요? May 13, 2025 at 7:54 PM, KIM SEYEON [김세연]_FA : @Kim Dongju(김동주)_FA @방혁 PM(Bang.Hyuk) FA 피엠님 참석 예정입니다. May 13, 2025 at 7:56 PM, 최대운 : @Kim Dongju(김동주)_FA @방혁 PM(Bang.Hyuk) FA 명일 09:30 또는 11:00 중 어느 시간대가 좋은지 알려주시면 그 시간에 맞추겠습니다. May 13, 2025 at 8:12 PM, Kim Dongju(김동주)_FA : 9시30분으로 하면 좋겠습니다. May 14, 2025 at 8:21 AM May 14, 2025 at 8:21 AM, 방혁 PM(Bang.Hyuk) FA : @이승엽 매니저님 분체 AGV전호기 티칭 APPLY 버튼 어드레스 설정이 잘못되어 있습니다. 티칭후 적용시 적용이 되지않고 PLC연결하여 확인해보니 APPLY 버튼 어드레스가 잘못설정되어있는걸로 보입니다. PLC단에서 터치 버튼 어드레스 변경하면 잘작동하는데 수정작업은 해두지 않겠습니다. 제어인원 요청드립니다 May 14, 2025 at 8:23 AM, 이승엽 : 담당자와 확인하여 정리하겠습니다 May 14, 2025 at 8:24 AM, 최대운 : 분체 옵셋으로 적용이 안됩니다. 티칭 변경이 필요하면 맵으로 조정해야됩니다. 수정이필요한 구간 어제 접수 받았는데 상세하게 알려주시면 점검하겠습니다. May 14, 2025 at 8:24 AM, 방혁 PM(Bang.Hyuk) FA : 어드레스가 다르게 되어있는게 기능을 죽여두려고 이렇게 설정되어있는 건가요..? May 14, 2025 at 8:31 AM, 강기훈 : 혹시 해당 기능 확인 시 사용자모드 권한 어떤걸로 하셨나요 May 14, 2025 at 8:34 AM, 최대운 : 유선상으로 말씀드렸듯이 현재 분체는 다른 AGV에 사이즈가 크고 옵셋으로 조정하기는 리스크하고 위험도가 높기 때문에 PLC자체 옵셋으로 조정이 불가합니다. 각 AGV마다 맵을따로 가지고 가기 때문에 각 AGV마다 수정이 필요합니다. 갑자기 문제없다가 음극에 이상이 발생된것도 이상하긴하네요. May 14, 2025 at 8:35 AM, 김희용 : @Baek Hojong(백호종)FA @심찬울 혹시 슬리터 Reel RW 이재기 1000m 권취 이재기 세팅관련해서 시간이 얼마나걸릴까요? May 14, 2025 at 8:37 AM, 방혁 PM(Bang.Hyuk) FA : 넵 이해했습니다. 유선으로 연락드린것처럼 어제 전달된 사항 제외하고 추가로 이슈있는 부분에 대해서는 내용 정리하여 전달드리겠습니다. 점검 일정이 어떻게 되나요?? May 14, 2025 at 8:40 AM, KIM SEYEON [김세연]_FA : 매니저님 메일송부 드렸습니다. May 14, 2025 at 8:48 AM, 강기훈 : 금일 점검 후 조치방안 및 일정 공유 드리겠습니다 May 14, 2025 at 8:53 AM, 최대운 : 어제부터 음극이라고 말씀하셨는데, 156번 노드는 양극입니다. 양극이 맞는지요? May 14, 2025 at 8:58 AM, 방혁 PM(Bang.Hyuk) FA : 양극이 맞습니다 May 14, 2025 at 9:33 AM, 강기훈 : 피엠님, 1층 스태킹 음극에서 진행 예정입니다! May 14, 2025 at 11:37 AM, Jongwon : @KIM SEYEON [김세연]_FA @연해리 @방혁 PM(Bang.Hyuk) FA 전동대차 지정장소에 하차 및 인계 완료 했습니다. May 14, 2025 at 11:38 AM, 방혁 PM(Bang.Hyuk) FA : 확인했습니다 May 14, 2025 at 11:48 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) 화성모듈 GF/1F AGV AP 점검작업 공유 드립니다 1. 1F부터 순차적으로 채널점검 및 변경작업 진행 2. 작업내용 - 1F AP 자동설정된 채널 Setting 점검 후 재셋팅 - GF AP Ch 수동셋팅 - AGV Client SSID 및 Ch 점검 3. 기타사항 - 금일 해당 내용 셋팅방법 CS인원에게 현장교육 완료하였으며, 오후 1시 30분부터 1F에서 김재윤M참관하에 CS인원이 진행 예정입니다 - 금일 작업 후 작업속도 감안하여 완료일정 공유드리겠습니다 May 14, 2025 at 11:49 AM, 배병민 (Bae Byoungmin) : 감사합니다 May 14, 2025 at 11:52 AM, 방혁 PM(Bang.Hyuk) FA : @이승엽 매니저님 전극동 포일창고 앞에 CnC에서 사용중인 테스트용 보빈 있으신가요???전극에서 저희가 사용하는거 아니면 치운다고 하는데 회신부탁드립니다 May 14, 2025 at 11:53 AM, 이승엽 : 저희가 사용하는 것이 아닌 것으로 확인됩니다. 치우셔도 상관이 없습니다. May 14, 2025 at 11:54 AM, 방혁 PM(Bang.Hyuk) FA : 네 감사합니다. 전달하겠습니다 May 14, 2025 at 11:56 AM, 연해리 : 감사합니다! May 14, 2025 at 2:36 PM, 강기훈 : 해당 설정은 UI에서 삭제 및 분체에이지비 횡전개 진행하겠습니다 작업인원이 부족하여 금주 토요일(5/17)까지 완료하겠습니다 May 14, 2025 at 5:03 PM, KIM SEYEON [김세연]_FA : @최대운 @강기훈 매니저님 어제 분체 양극 발생한 2건 ㄴ 스테이션에서 안멈추고 계속 직진 ㄴ 에어샤워에서 무언정지 경과 공유 부탁드립니다. 헝가리 테크니션 야간조가 이거 해결안되면 퇴사한다고 합니다. May 14, 2025 at 5:10 PM, 강기훈 : 1. 스태이션 안멈추고 계속전진 관련 바닥레벨 문제로 정지 시 계속 밀립니다 현재도 테스트 중 입니다 >> 이후 바닥레벨로 인한 슬립은 바닥보강 또는 평탄작업 필요합니다 2. 에어샤워 무언정지 관련 양극 분체에이지비 장애물감지센서(라이다, 팀) 클리닝작업 및 광학보정 진행으로 모니터링 필요 >> 이후 발생 시 라이다, 팀센서 렌즈 극세사로 클리닝 진행필요 May 14, 2025 at 5:11 PM, KIM SEYEON [김세연]_FA : 2번은 발생하면 우선 극세사로 센서크리닝하라고 이야기하겠습니다. May 14, 2025 at 5:11 PM, KIM SEYEON [김세연]_FA : 1번을 해결 부탁드립니다. May 14, 2025 at 5:12 PM, 강기훈 : 조만간 좋은 소식 드릴 수 있도록 하겠습니다 May 14, 2025 at 5:13 PM, KIM SEYEON [김세연]_FA : 👍 May 14, 2025 at 6:10 PM, KIM SEYEON [김세연]_FA : @Jongwon 매니저님 명일 톱텍 점검인원 출입신청 및 점검시간 알려주십시오. May 14, 2025 at 6:12 PM, Jongwon : 아직 공유 받지 못했습니다. 공유 받는대로 전달 드리겠습니다. May 14, 2025 at 6:24 PM, 강기훈 : 분체 양극 스테이션(156번 노드) 바닥레벨로 인한 슬립 관련 임시조치 완료하였습니다 *작업내용 1. 156번 노드 위치 수정 2. 진입 헤딩각도 조정 3. 브레이크 타이밍 조정 4. 브레이크 조건 추가 5. 스테이션 재티칭 * 특이사항 1. PLC 프로그램 임시수정으로 최대한 도킹 시 에러발생 빈도를 줄일 수 있도록 수정하였습니다 금일 국내에 PLC 수정요청 예정이며, 금요일 적용 예상입니다 2. 현재 생산이 멈추어 수정 후 모니터링 횟수가 적습니다 (반송 3회) 야간 생산 시 별도 모니터링 필요할 것 같습니다. 3. 혹여너 야간 모니터링 중 발생 시 전노드(28번 노드)로 수동 이동 -> 오토전환 -> 156번 노드 AGV 자동 이동 4. 3번 조치 중 AGV 슬립 발생 시 PLT 발로 밀면서 가이드 안으로 밀어 넣어야 할 것 같습니다(빈도는 확실히 줄었습니다) May 15, 2025 at 7:54 AM May 15, 2025 at 7:54 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금일 조립1라인 Burst run 08시부터 14시까지입니다. 출근하시면 LR UR시 금번 스택 상하행선 바꾼 수정사항 모니터링 부탁드립니다 May 15, 2025 at 8:03 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 C2STKC72 순환물류 CCS 플레이백이 5.14 16시부터 안나옵니다. 확인 부탁드립니다. May 15, 2025 at 8:04 AM, 최대운 : 네, 출근해서 담당자하고 같이 모니터링 하겠습니다. 5/15: ~ 14시까지 5/16: ~ 17시까지 모니터링 예정입니다. May 15, 2025 at 8:09 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 CCS에서 컨베이어의 화물이 실시간으로 안움직입니다. F5를 눌러줘야 화물이 화면상으로 움직이는 상황입니다. 현장 확인하시고 조치 부탁드립니다. 최근에 몽골 작업자들이 순환물류 조치가 늦었는데 이 현상 때문입니다. May 15, 2025 at 8:09 AM, KIM SEYEON [김세연]_FA : 긴급하게 금일 조치 부탁드립니다. May 15, 2025 at 8:13 AM, 최대운 : @KIM SEYEON [김세연]_FA IPS 스티커 BP사로부터 남은 스티커 자재 요청하여 접수 받았습니다. IPS 스티커 드릴려고 하니 전달 받으실 분 알려주십시오. May 15, 2025 at 8:14 AM, KIM SEYEON [김세연]_FA : @Kim Dongju(김동주)_FA 피엠님 께 전달부탁드립니다 May 15, 2025 at 8:23 AM, 강기훈 : 김동주 피엠님 금일 오후 1시 30분 범퍼센서 반납 시 같이 전달 드리겠습니다 May 15, 2025 at 8:26 AM, KIM SEYEON [김세연]_FA : @Jongwon 매니저님 톱텍 점검인원 출입신청 및 점검시간 알려주십시오. May 15, 2025 at 8:27 AM, KIM SEYEON [김세연]_FA : 금토 작업에 대해서는 ㄴ 출입신청 ㄴ 작업허가서 필요합니다. May 15, 2025 at 8:29 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 IPS 스티커 구매처나 구매링크 알수 있을까요? 한국서 사서 핸드캐리하려 합니다. May 15, 2025 at 8:34 AM, 강기훈 : LEUZE사 의 IPS208I 입니다 LEUZE 대리점 통해서 사양참고 하시어 구매진행 하시면 될 것 같습니다 May 15, 2025 at 8:39 AM, Jongwon : 네 피엠님 작업자 출입신청은 14일 오전에 올렸고 금일 출입 인원은 Sangchel Yeo, Youngwoo Kim, Jemin Kim 3분이고, 작업시에는 Sarangerel Dulguun 1분 추가 투입됩니다. 4분다 출입신청 상신한 상태이고, 승인여부 확인 부탁 드립니다. May 15, 2025 at 8:42 AM, 강기훈 : 시너스텍 구매처 및 담당자 연럭처 공유 드립니다 구매처: 로이체일렉트로닉 담당자: 이교복 연락처: 010-2024-8227 모델명: IPS208I May 15, 2025 at 8:43 AM, KIM SEYEON [김세연]_FA : 감사합니다 May 15, 2025 at 8:45 AM, 이승엽 : 네 확인해보도록 하겠습니다. @이연수 May 15, 2025 at 8:57 AM, Jongwon : 방문 신청 승인되면 14:00 현장 입실 예정입니다. May 15, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : 톱텍인원 모두 승인 완료되었습니다 May 15, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : 오시면 저한테 연락주세요. May 15, 2025 at 8:59 AM, Jongwon : 네 출입시 연락 드리겠습니다. May 15, 2025 at 9:11 AM, 이연수 : CCS Refresh 안되는 현상의 수정버전을 노칭CCS에 적용해놓았는데 1주동안 문제가 발생하지 않아 금일중 전라인 패치 하겠습니다. @이승엽 May 15, 2025 at 9:13 AM, KIM SEYEON [김세연]_FA : 그런데 ccs refresh는 언제부터 안된건가요? May 15, 2025 at 9:13 AM, KIM SEYEON [김세연]_FA : 원인이 무엇이었나요? May 15, 2025 at 9:19 AM, 이연수 : 특정 사용자가 CCS UI 접속을 하면 플레이백 데이터 누락되고 동시에 화면 리프레쉬에도 문제가 발생합니다. 일단 소스에서 조치는 해놓았습니다. 발생한지는 1개월 넘었는데 원인파악 하는데 오래걸렸습니다. May 15, 2025 at 9:56 AM, 김희용 : @Baek Hojong(백호종)FA @심찬울 @KIM SEYEON [김세연]_FA 금일 15:00 Slitter RW이재기 1000m 권취 점검 예정입니다. 양극 Slitter #2가 될 것 같은데 변경시 공유드리겠습니다 May 15, 2025 at 10:11 AM, 김희용 : 16:00로 변경 부탁드립니다 호기는 양극 Slitter#2 입니다! May 15, 2025 at 10:18 AM, KIM SEYEON [김세연]_FA : 특정사용자가 누구인가요? 저는 이 문제가 다시 발생하지 않게 하고 싶습니다. May 15, 2025 at 11:17 AM, 이연수 : 접속정보 로그는 사용자ID가 아니라 ConnectionID 라는 토큰 형태로 남아서 그 접속자가 누구인지는 알 수 있는 방법이 없습니다. 다만 특정 커넥션ID가 접속하는 순간 Playback과 리프레쉬에 문제가 생기고 로그아웃 하는순간 정상이 되는 현상은 확인할 수 있습니다. 관련 로그가 포함된 원인 보고서를 메일로 보내드리겠습니다. May 15, 2025 at 12:54 PM, 이연수 : @최태영 @김주연 @김희용 금일 적용할 예정이었던 릴창고 RTV입출고 포트 100초 대기하는 문제는 자체 검증에 시간이 걸려 내일 패치 가능할 것 같습니다. May 15, 2025 at 2:30 PM, 최대운 : @KIM SEYEON [김세연]_FA 분체 에어샤워 내 장애물 감지 최대한 조치 하였는데 간혹 발생하는 경우가 있습니다. 장애물 감지로 “Go step timeover”에러로 이어지는 경우가 간혹 발생합니다. 에러 조치 시 작업자가 수동 조그 이동으로 조치하여 그 이후 제대로 작동이 안되는 경우가 있는것 같아 매뉴얼을 간단하게 만들었습니다. 매뉴얼을 공유하여 조치시 참고 하셨으면 합니다. May 15, 2025 at 2:32 PM, 김희용 : @Baek Hojong(백호종)FA @심찬울 16:00 양극 슬리터 2호기 리마인드 드립니다. (권취량 1000m 점검 ) May 15, 2025 at 2:32 PM, KIM SEYEON [김세연]_FA : 교육하겠습니다. 그래도 장애물 감지 최대한 안하도록 해주세요. May 15, 2025 at 2:34 PM, 최대운 : 정말 안하도록 최대한 조치 한 상태입니다. 어제도 모니터링 했을경우 단헌번도 발생 안했는데, 간혹 주행 오차로 발생하는 경우가 있는것 같습니다. May 16, 2025 at 6:47 AM May 16, 2025 at 6:47 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금일 오전6시부터 오후6시까지 스택3라인 R@R로 AGV FULL가동합니다. 금번 개선점 현장서 모니터링 잘 부탁드립니다. 감사합니다. May 16, 2025 at 6:49 AM, 최대운 : 네, 알겠습니다. 전일 말씀그린것처럼 09:00~17:00 모니터링 하면서 수정/보완 할 사항이 있으면 진행하겠습니다. May 16, 2025 at 6:50 AM, KIM SEYEON [김세연]_FA : 네 출근하시면 봐주십시오. 오시기 전까진 저희 인원이 있을겁니다. May 16, 2025 at 6:52 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 그리고 어제 보니 노칭GF 3.4.5.6라인 가동하니 AGV가 다관절포트앞서 밀리던데, 해당 개선 요청드립니다. 적용 아이템 있음 변경점 방에 올리시고, 오전중 적용하고 모니터링 부탁드립니다. May 16, 2025 at 6:59 AM, 최대운 : 전일 현장에서 요청한 사항 외에는 제가 보거나 한 사항이 없기 때문에 당장은 요청사항 밖에 없을것 같습니다. 현재 구조상 시점이 안좋으면 밀릴수 있으며, 매시간마디 계속 밀린다면 뭔가 근본원인을 찾아야될 것 같습니다. May 16, 2025 at 9:32 AM, 김희용 : @최대운 매니저님 제가 VD AGV INPLACE ALARM을 좀 분석중에 있는데 24시간동안 1F AN VD AGV의 반송횟수가 256건 정도되는데요. AGV#4번만 3회 INPLACE가 발생중입니다. (위치 제각각, 26, 335, 313 경향성 없어보임) 1F AN VD AGV #4의 경우 상/하단 Teaching 에대한 재점검을 부탁드리겠습니다. *9대의 반송 분배량은 비슷함. May 16, 2025 at 9:41 AM, 김희용 : 전체적인문제보다는 AGV#4는 호기 특성이 조금 있는 것 같아 요청드립니다. May 16, 2025 at 9:44 AM, 최대운 : 네 확인 하겠습니다. May 16, 2025 at 10:08 AM, 김희용 : 예 추가적으로 AGV로 Loading 때만 inplace를 보는게 맞지 않을까 싶습니다. 이미 정상적으로 뜬자재를 Unloading과정에서도 inplace를 보고있어 진동 Fork의 쳐짐 상태 등에 따라서 알람이 뜨는 경향이 보입니다. May 16, 2025 at 10:09 AM, 최대운 : VD 전창고 GF, 1F 구간인 로딩 구간에 문제 되었던 부분 체크 하겠습니다. May 16, 2025 at 1:31 PM, 문진영 : @동현 PM님 혹시 1F 음극 분체 RTV CV쪽 분진 관련 청소 후 전원 인가 가능 시점 확인되셨을까요? May 16, 2025 at 1:37 PM, 동현 : 빠르게 하고있습니다. 말씀드리겠습니다 May 16, 2025 at 1:41 PM, 문진영 : 네! 감사합니다. May 16, 2025 at 1:44 PM, 동현 : This message was deleted. May 16, 2025 at 1:45 PM, 동현 : 2시에 완료 됩니다 매니저님 May 16, 2025 at 1:59 PM, 문진영 : 네. 알겠습니다. May 16, 2025 at 3:03 PM, 최대운 : GF 노칭 약간의 시간 단축을 위해 노드 추가 하겠습니다. 양극 1번 로봇 예시로 설명 드리겠습니다. As-Is: 128번 노드에서 AGV가 대기 중이고 157, 158에서 AGV가 작업 완료하고 127번까지 나와서 도착해야지만 128번에 대기 중이 AGV가 167번으로 이동 To-Be: 157,158번 노드에서 작업 완료하고 127번으로 이동하면, 128번 대기 중인 AGV가 167번 이동 가능 현재 로봇쪽 모두 적용하고자합니다. 현재 맵 반영하고 차주월요일 업데이트 예정입니다. May 16, 2025 at 3:06 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 16, 2025 at 3:23 PM, 최대운 : @KIM SEYEON [김세연]_FA 노칭에 SW 리밋이 나서 확인 해보니 누군지는 모르지만 옵셋 값을 반대로 적용해서 발생 한것 같습니다. 새로 수장은 했습니다. 지금 제가 매뉴얼을 만들고는 있는데, 여러 케이스 때문에 조금 늦어 지고 있기는 합니다. 자료가 완성 되면 자료 포함 옵셋 관련 교육을 시켜드릴 수 있는데, 옵셋 적용할 담당자들만 한번 교육 하는건 어떨까요? May 16, 2025 at 3:24 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 16, 2025 at 4:25 PM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 어제 발생한 분체 화물 낙하 관련 원인분석 보고서를 제출해 주실수 있을까요? 재발방지를 위한 item도 포함됐으면 합니다. May 16, 2025 at 4:28 PM, 이승엽 : 네 알겠습니다 May 16, 2025 at 4:30 PM, 이승엽 : 원인 분석까지는 어려울 수 있습니다. 로그 확인 / 현장 재연 등을 통해서도 100% 확정적인 원인은 확인이 어려웠습니다. 재발 방지에 포커스를 맞추고자 합니다. May 16, 2025 at 4:42 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 재발방지대책은 동일한 컨셉의 모든 구역에 적용되는게 좋을것 같습니다. ㄴ 분체창고 양.음극 SCS - CCS RTV ㄴ 릴창고 양.음극 SCS - CCS RTV ㄴ 모듈창고 SCS -CCS RTV 수평전개도 부탁드립니다. May 16, 2025 at 5:46 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 금일 OI TAS를 활용하여 작업한 내용 공유 드립니다. (메일로 상세 내용 공유 예정) VD 전창고쪽 Inplace 알람 발생한 호기 및 노드 확인 후 조정하였습니다. OI TAS 5/10~5/16일 data 기준 1. GF VD 양극 - 126번 노드 Fork 2번에서 AGV 7호기, 5호기 발생 2. GF VD 음극 - 247번 노드 Fork 2번에서 AGV 2호기 발생 - 249번 노드 Fork 2번에서 AGV 8호기 발생 금일 GF 층은 조치 완료 하였습니다. May 16, 2025 at 6:02 PM, 김희용 : @최대운 매니저님 Fork 2번이 상단 포크일까요? May 16, 2025 at 6:03 PM, 최대운 : 네 맞습니다. May 16, 2025 at 6:03 PM, 김희용 : 감사합니다. May 16, 2025 at 7:05 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 금일 분체 음극 인터락 및 개선사항은 양극에도 적용이 되었을까요? May 16, 2025 at 7:29 PM, 문진영 : 1F, GF ,양,음 적용했습니다. May 16, 2025 at 8:05 PM, Jun(정우준)_SKOH FA : GF ST 순환물류 데이터 꼬임 관련해서 현상 확인 요청드립니다. 1. 화물 정위치에서 데이터 로스 에러발생 2. 데이터 로스 에러발생시, 데이터 사라짐. 3. 2분뒤 다른 위치의 화물에 데이터 덮어씌워짐. 19:33:51 - 16153 MLC4084트레이 아이디 로스 발생되면서 트레이 아이디 사라짐 19:35:22 - 16153 데이터 삭제되면서 - 16142에 있는 화물에 데이터 덮어씌움 실물 : 공 MLA4239, 데이터 : 풀 MLC4084 May 16, 2025 at 8:39 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 순환물류 상기현상 확인 부탁드립니다. 플레이백 봐주세요. May 16, 2025 at 8:40 PM, 심찬울 : 명일 확인해보겠습니다. May 16, 2025 at 8:41 PM, KIM SEYEON [김세연]_FA : 네 꼭 해결부탁드립니다. May 16, 2025 at 8:42 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 에어샤워 멈춤 재발했습니다. May 16, 2025 at 8:42 PM, KIM SEYEON [김세연]_FA : Photo May 16, 2025 at 8:46 PM, 최대운 : 지난번 자료에서도 최대한 발생안되게 양극은 조치 했는데, 음극은 최근 거의 없었습니다. 우선 내일 담당자분께 양극이랑 유사하게 점검 요청할게요. 그럼에도 간혹 발생하면 전일 전달드렸던 조치사항대로(매뉴알자료) 조치 부탁드립니다. May 16, 2025 at 9:00 PM, KIM SEYEON [김세연]_FA : Photo May 16, 2025 at 9:00 PM, KIM SEYEON [김세연]_FA : horrible이라고 합니다 May 16, 2025 at 9:00 PM, KIM SEYEON [김세연]_FA : 메뉴얼은 전파했습니다. 조치를 안하고 싶습니다. May 17, 2025 at 8:13 AM May 17, 2025 at 8:13 AM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 확인시간 알려주시면 현장으로 가겠습니다. May 17, 2025 at 8:13 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 확인시간 알려주시면 현장으로 가겠습니다. May 17, 2025 at 9:25 AM, 강기훈 : 9시 45분부터 진행예정입니다 May 17, 2025 at 9:26 AM, KIM SEYEON [김세연]_FA : 네 현장서 뵙겠습니다. May 17, 2025 at 9:30 AM, 강기훈 : This message was deleted. May 17, 2025 at 9:30 AM, 강기훈 : 분체에이지비 옵셋설정 및 UI 삭제 금일 전호기 횡전개 완료했습니다 May 17, 2025 at 9:31 AM, KIM SEYEON [김세연]_FA : 제가 분체 AGV 에어샤워어서의 무언정지를 중요하게 생각하는 이유는 해당 구간에서 AGV가 서면 자동도 수동도 생산이 안됩니다. All stop입니다. May 17, 2025 at 9:36 AM, 강기훈 : 근본원인도 같이 점검하겠으나 고스탭 타임아웃 발생조건 시간을 줄여 알람으로 좀 더 일찍 확인할 수 있는 방안도 검토해 보겠습니다 May 17, 2025 at 9:57 AM, 심찬울 : 지금 현장에서 모니터링 하고있습니다 May 17, 2025 at 12:19 PM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 완료되면 현상원인과 조치내용 알려주십시오 May 17, 2025 at 12:50 PM, KIM SEYEON [김세연]_FA : Photo May 17, 2025 at 12:50 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 상기 동선꼬임 확인 부탁드립니다. 플레이백 봐주십시오. May 17, 2025 at 12:51 PM, KIM SEYEON [김세연]_FA : Photo May 17, 2025 at 12:51 PM, KIM SEYEON [김세연]_FA : Photo May 17, 2025 at 12:51 PM, KIM SEYEON [김세연]_FA : 변경점 이후에는 모니터링 필요합니다. May 17, 2025 at 1:34 PM, 강기훈 : 방금 플레이백 확인한 거로는 노칭 그룹핑과는 무관하며, 11시 50분경 UNK 자재를 NG 포트(263번 노드)에 내려놓을때 327번 노드에 AGV가 진입하여 263번 노드에 있던 AGV와 블럭이 되었던 것으로 확인했습니다 해당 현상 시 263번 노드 AGV 후진하여나갈 수 있도록 ACS 수정 예정이며 적용 시 변경점 관리방에 공유 후 Update 진행하겠습니다 May 17, 2025 at 1:35 PM, 강기훈 : GF 노칭은 금일 퇴근전까지 모니터링 하겠습니다 May 17, 2025 at 1:35 PM, KIM SEYEON [김세연]_FA : 감사합니다 May 17, 2025 at 1:51 PM, 심찬울 : 154->32 (stk hs) move 와 153->154 move 가 동시에 진행되어 153 데이터가 32번으로 넘어가는 현상이 있었습니다. 154->32 move 완료 후 153->154 move 진행하는거로 프로그램 변경 진행하고 모니터링 완료했습니다. May 17, 2025 at 1:54 PM, KIM SEYEON [김세연]_FA : 순환물류 ㄴ 1F 양극 ㄴ 1F 음극 ㄴ GF 양극 ㄴ GF 음극 모두 수평전개 된건가요? May 17, 2025 at 1:55 PM, 심찬울 : 해당트랙만 같은현상이 있었고, 다른 개소는 문제 없었습니다 May 17, 2025 at 1:59 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 17, 2025 at 3:46 PM, Jun(정우준)_SKOH FA : 매니저님 01:52:24해당 시간대 플레이백도 봐주실수 있나요?? 지금 얘기하신건 154->32, 153 -> 154 에서 데이터 꼬임인데 153->154, 155->154 에서도 데이터 꼬임 있었고. 왜 142에 데이터가 덮어 씌워지는지도 궁금합니다. GF ST 순환물류 화물 데이터 꼬임. 1:52:24 16153에서 16154로 "화물1" 이동 16153에서 16154로 "화물1"데이터는 넘어가지 않음 1:52:32 16153에서 16154로 "화물1"데이터는 넘어가지 않은 상태에서 16155에서 16154로 "화물2"이동 16155에서 16154로 "화물2"데이터 덮어씌움 이 과정에서 "화물1"데이터 사라짐. 1:55:33 16142에 새로 투입된 화물에 "화물1"데이터 덮어씌워짐. May 17, 2025 at 3:47 PM, Jun(정우준)_SKOH FA : GF ST 순환물류 5월17일 1시52분 24초 입니다. May 17, 2025 at 3:47 PM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 확인부탁드립니다 May 17, 2025 at 3:54 PM, Jun(정우준)_SKOH FA : 유선으로 연락 받았고, 같은 현상으로 확인했습니다. @심찬울 설명 감사합니다. May 17, 2025 at 3:55 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 17, 2025 at 4:03 PM, 강기훈 : @KIM SEYEON [김세연]_FA 분체 에이지비 에어샤워구간 수정내용 공유 드립니다 1. 양극 - 138, 199번 노드 위치 변경 2. 음극 - 장애물감지샌서 클리닝 - RSL 센서 광학보정 작업 - 137번 <-> 211번 노드 이동 시 장애물 뮤트 양극은 오전 11시 적용 후 현재까지 생산 대응 시 장애물감지 발생 없었습니다. 바쁘시겠지만 주말간 모니터링 부탁드리며 재발 시 PLC 프로그램으로 개선할 수 있는 방안 검토하겠습니다 May 17, 2025 at 4:10 PM, KIM SEYEON [김세연]_FA : 네 감사합니다 모니터링 하겠습니다. May 18, 2025 at 8:50 AM May 18, 2025 at 8:50 AM, KIM SEYEON [김세연]_FA : Photo May 18, 2025 at 8:51 AM, KIM SEYEON [김세연]_FA : @최대운 @강기훈 매니저님 새벽 5시40분부터 1F노칭 음극서 wheel direction abnormal로 인해 비가동이 많이 발생하였습니다. ACS확인해주시고 현상 파악 및 대책 확인 부탁드립니다. May 18, 2025 at 9:17 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 GF AN 6라인쪽 자동포트 MCP VDC24 SUB 라인 트랩되면서 포트 12개 동시에 다운되는 증상이 있습니다. VDC 24V SUB라인이 시스템하고 터치판넬 그리고 냉각팬에 연결된걸로 보이는데 어디에서 쇼트나는지 확인하기가 어렵습니다. 알람명은 없습니다. MCP 트랩나서 판넬 열어서 확인해보니 24VDC SUB 라인이 떨어졌습니다. 현재는 라인 전원 살려서 복구해뒀고 4시 40분 부터 3번 발생했습니다. May 18, 2025 at 9:18 AM, KIM SEYEON [김세연]_FA : 7 photos May 18, 2025 at 9:18 AM, KIM SEYEON [김세연]_FA : 작년 10월하고 비슷한 문제같은데 시너스텍 제어에 문의해주실수 있을까요? May 18, 2025 at 9:21 AM, 문진영 : 확인 좀 해 보겠습니다. May 18, 2025 at 9:29 AM, 문진영 : 혹시 CP모두 내리고 한 개씩 온해보면 쇼트나는 구간은 대략적으로 확인 가능할 듯 한데 사전 확인 좀 부탁드려도 될까요? BP사쪽 제어에는 별도로 연락해보겠습니다. May 18, 2025 at 9:31 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 18, 2025 at 10:12 AM, 문진영 : 지금 BP사쪽 제어 인원 연락되어 들어갈 예정이나 시간이 좀 걸릴 듯 합니다. (약 11시경 예상됨) 상기 요청드린 사전 점검 통해 특정 CP ON했을 때 트립된 구간만 OFF해 주시면 다른 구간은 사용 가능할 듯 하며 인원 도착 시 세부 확인 및 조치되도록 하겠습니다. May 18, 2025 at 5:08 PM, KIM SEYEON [김세연]_FA : @이승엽 @이연수 매니저님 금일 조립GF 노칭 다관절포트에 ㄴ 공공 플레이트만 있을시 ㄴ 실매거진 실플레이트만 있을시 에 따른 대처 방법 공유 부탁드립니다. 야간조에 교육하겠습니다. May 18, 2025 at 5:31 PM, 이연수 : 1. 공공만 있을 시 ㅡ 안에 들어가서 공공2개를 들어낸 후 ㅡ CCS에서 Carrier List 탭에서 해당 아이디를 Remove 하고 ㅡ CCS 화면 오른쪽의 CarrierID 지운후 Modify버튼 ㅡ 로봇판넬에서 오토스타트 May 18, 2025 at 5:36 PM, 이연수 : 2. 실만 있을 시 ㅡ agv포트에 놓여있는 실매거진을 모두 들어내고 ㅡ CCS에서 Carrier List 탭에서 해당 매거진을 찾아서 Remove ㅡ 화면 오른쪽 CarrierID 깨끗이 지운후 Modify 클릭 ㅡ 로봇판넬에서 오토스타트 May 18, 2025 at 5:38 PM, 이연수 : 다른 방법도 있지만 일관된 방법으로 조치하는 게 실수를 줄일 수 있습니다. May 18, 2025 at 5:47 PM, 이연수 : 2. 실만 있을 시 ㅡ 들어낸 실매거진은 다시 agv포트에 올리지 말고 플레이트에 담아 VD 창고에 넣는 게 조치가 쉽습니다. May 18, 2025 at 5:48 PM, KIM SEYEON [김세연]_FA : 이렇게 하면 RTD와도 정보가 맞나요? 아님 RTD OP에게 정보보정을 요청해야하나요? May 18, 2025 at 5:53 PM, 이연수 : 공공은 매거진이 없으므로 rtd와 관련이 없고 실도 창고에 입고 전이라 빼내도 상관없습니다. 들어낸 실매거진을 VD 창고로 넣었을때 NG없이 잘 들어간다면 문제가 없는 것으로 알고 있습니다. May 18, 2025 at 6:23 PM, KIM SEYEON [김세연]_FA : 네 교육하겠습니다. May 19, 2025 at 1:22 AM May 19, 2025 at 1:22 AM, 김희용 : Photo May 19, 2025 at 1:23 AM, 김희용 : 방혁 PM님이 확인하러 가는중인데 AGV 에서 탄내가 난다는 내용입니다. 일단 현장상황 확인되면 내용 추가 겅유드리겠습니다 May 19, 2025 at 1:41 AM, 김희용 : 현장확인결과: 충전기에서 발열발생 X 1.GF AN NC AGV5 전장함내부에서 탄내발생 2.탄내발생 직전까지 REAR SCANNER ZONE ERROR 다발 발생이력있음 3. REAR SCANER 쪽 배선에서 탄내 심하게 남 조치결과 : 전원 차단했었지만 전원 재인가 후 원인파악중 May 19, 2025 at 1:42 AM, 김희용 : @이승엽 매니저님 명일 해당문제에대해서는 원인파악 될 수 있도록 부탁드립니다. May 19, 2025 at 2:26 AM, 방혁 PM(Bang.Hyuk) FA : 원인 파악결과 공유드립니다. 장소 : GF AN NC 대상 : AGV 5 특이사항: 5월 8일 동일한 증상으로 Report 되었었지만 특이사항 없다는 답변을 끝으로 조치사항 없었음 원인: 배터리 > 단자함으로 들어오는 메인 24V Vcc와 GND 사이에서 발열발생 +단자 와 -단자 녹으면서 서로 달라붙었습니다. 조치: 전원 차단후 AGV5비가동(171노드) CHAGER 2 DISABLE 추정원인 : 접지 상태 불량 원인파악 부탁드립니다. May 19, 2025 at 6:38 AM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 Wheel direction abnormal 금일 확인 부탁드립니다. May 19, 2025 at 6:38 AM, KIM SEYEON [김세연]_FA : 2 photos May 19, 2025 at 6:38 AM, KIM SEYEON [김세연]_FA : 하기는 block 현상입니다. May 19, 2025 at 6:38 AM, KIM SEYEON [김세연]_FA : Photo May 19, 2025 at 7:18 AM, 최대운 : GF/1F 노칭 금일 점검토록 하겠습니다. May 19, 2025 at 7:23 AM, KIM SEYEON [김세연]_FA : 감사합니다 May 19, 2025 at 9:30 AM, KIM SEYEON [김세연]_FA : 9시반 분체화물 전도관련 회의는 행정동2층 sandor 회의실입니다. May 19, 2025 at 9:31 AM, KIM SEYEON [김세연]_FA : 10시로 변경되었습니다. May 19, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 GF NC AN의 AGV 5호기 배선 열화 관련 금일 점검 내용 공유부탁드립니다. 노칭GF도 물동량이 빠듯할것 같은데, 리커버리는 어떻게 해야할지도 의견 부탁드립니다. May 19, 2025 at 3:05 PM, 강기훈 : This message was deleted. May 19, 2025 at 3:05 PM, 강기훈 : GF 노칭 음극 5호기 배선 열화 관련 점검내용 공유 드립니다 1. 현황: Main 차단기 2차측에서 전장함으로 연결되는 콘넥터에서 전원선 1가닥 피복 확인 2. 원인: 전원선과 콘넥터 연결부분의 플라스틱이 소손된 상태로 보아 전원선과 콘넥터의 접촉이 불량으로 발생 예상 3. 조치방안: - 전원선 케이블 2ea 및 전원선 콘넥터 Male, Female 1set 국내 자재수급 및 교체 필요ㅏ자재 수급가능 일정 확인 중) - 전라인 생산대응 위해 파손부위와 1F 조립 AGV 사양동일 여부 확인 후 교체(SKON 검토 및 승인필요사항) 빠른 조치를 위해서는 임시적으로 1F 조립라인 대기호기에서 파츠 수급하여 GF NC AN AGV#5에 교체적용 하는 것이 좋을 것 같습니다 May 19, 2025 at 3:07 PM, 강기훈 : 전원선 소손 상태를 보면 장시간 데미지를 받아 열화된 것으로 보여 접촉불량으로 발생할 가능성이 높아 보이며 케이블 손상도 의심됩니다 따라서 커넥터 뿐만 아닌 전원케이블도 통째로 교체할 예정입니다 May 19, 2025 at 3:08 PM, KIM SEYEON [김세연]_FA : 네 교체시간을 알려주십시오 테크니션이 함께 보겠습니다. May 19, 2025 at 3:08 PM, KIM SEYEON [김세연]_FA : 자재수급일정도 알려주십시오 May 19, 2025 at 3:19 PM, 강기훈 : 1층 조립라인 에이지비 중 1대 지정해 주시면 명일 바로 적업 가능할 것 같습니다 작업시간은 교체/설치/배선정리 포함 약 4시간 예상됩니다 May 19, 2025 at 3:19 PM, 강기훈 : 수급일정은 확인되는대로 공유 드리겠습니다 May 19, 2025 at 3:24 PM, Kim Dongju(김동주)_FA : 부품 교체 가능한 AGV 확인 해서 알려드리겠습니다. May 19, 2025 at 3:38 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 @Lee Junghan(이정한)_CS 매니저님 금일 17시 Daily 회의 오실때, 금일 구축업체 작업내용 금일 cs작업 실적 명일 진행계획 을 확인하시고 참석해주세요. May 19, 2025 at 3:39 PM, 이승엽 : 이거는 매일 저녁에 취합이 되기 때문에 17시에는 좀 확인 이 어려울 수 있습니다. May 19, 2025 at 3:40 PM, 이승엽 : 그래서 지난 반에 오전 데일리에서 전일 작업 / 계획 가지고 이야기 한다고 논의가 되었었습니다 May 19, 2025 at 3:41 PM, KIM SEYEON [김세연]_FA : 알겠습니다. 우선 17시에 이야기하시죠. 취합 안되어도 괜찮습니다. May 19, 2025 at 4:15 PM, 최대운 : @KIM SEYEON [김세연]_FA 명일 오전에 출근해서 1F 노칭 음극 1대 정해서 자재 사용하여 살리도록 하겠습니다. 호기는 명일 확인 후 공유 드리도록 하겠습니다. May 20, 2025 at 8:35 AM May 20, 2025 at 8:35 AM, 최대운 : 금일 오전 9시 30분 경에 1F 노칭 음극에서 해체 작업하고 GF로 내려와 교체하고자합니다. 참석할 담당자분 알려주시면 될 것같습니다. May 20, 2025 at 9:15 AM, 이승엽 : @권기홍 릴창고 음극 SCS 에서 확인 증에 있습니다 May 20, 2025 at 9:17 AM, 이승엽 : @KIM SEYEON [김세연]_FA 금일 데일리는 어디로 가면 될런지요? May 20, 2025 at 9:17 AM, KIM SEYEON [김세연]_FA : 행정동2F sandor 회의실서 May 20, 2025 at 9:18 AM, 이승엽 : 넵 May 20, 2025 at 9:18 AM, KIM SEYEON [김세연]_FA : 오늘부터 고정으로 거기서 하겠습니다. May 20, 2025 at 9:18 AM, KIM SEYEON [김세연]_FA : 오셔서 음극 릴창고 이야기부터 같이 해보시죠. 감사합니다. May 20, 2025 at 9:18 AM, Kim Dongju(김동주)_FA : 제가 참석하겠습니다..지금 회의가 있어 오후에 하면 어떨까 합니다. May 20, 2025 at 9:20 AM, 김주연 : @김희용 펨님 2층 산도르에요 May 20, 2025 at 9:25 AM, 최대운 : 오전에 해서 투입을 해야지 오후에 모니터링 가능합니다. 오후면 투입 후 모니터링을 못할 수 있습니다. 크게 어려운게 없어서 바쁘시면 그냥 저희가 진행하고 구두로 설명 드리면 어떨까요? May 20, 2025 at 9:29 AM, Kim Dongju(김동주)_FA : 진행하고 계시면 회의 끝나고 바로 가겠습니다. May 20, 2025 at 9:30 AM, 최대운 : 아직 G층에서 확인 중이고 1층에서 작업할때 다시 공유 드리겠습니다. May 20, 2025 at 9:32 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. May 20, 2025 at 9:42 AM, 최대운 : 노칭 1F 음극 17호기로 지금 해체 작업 진행하겠습니다. May 20, 2025 at 10:01 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님이 같이 봐주세요. May 20, 2025 at 10:02 AM, Baek Hojong(백호종)FA : 네 알겠습니다 May 20, 2025 at 11:00 AM, 이승엽 : @KIM SEYEON [김세연]_FA PM님. 바쁘시겠지만 준공 잔건 업데이트 리스트 회신 부탁 드립니다. May 20, 2025 at 11:06 AM, 문진영 : @KIM SEYEON [김세연]_FA PM님 어제 문의드린 슬리터, 프레스 이재기는 정위치 도그 작업 후 프로그램 횡전개 완료 했는데 생산 호기는 모니터링하고 있는데 비생산 호기는 EQ 지원 받아 공보빈으로 반송 테스트하고자 하는데 지원 가능할까요? (수동 티칭 위치 정위치 센싱되는 부분은 확인 완료함, 정상 반송 추가 확인을 위한 부분임) 추가로 코터 이재기는 법인 횡전개 후 추가 변경 없는지 확인 부탁드립니다. 추가 변경 사항 없고 동일 버전이면 현장 PLC 받아서 변정점 방 사전 공유 후 횡전개 작업 진행하고자 합니다. 상기 두가지 사항 확인 후 회신 부탁드립니다. May 20, 2025 at 4:20 PM, 최대운 : @Baek Hojong(백호종)FA @강기훈 음극 코터 AGV21호기가 코터 2라인에서 롤 취외 후 나올 떄 계속 장애물 감지가 걸리는거 나올때 잠시 뮤팅하는건 어떨까요? 다른 작업 끝나고 강기훈 매니저하고 담당자 갈 예정입니다. 협의 부탁드립니다. May 20, 2025 at 4:28 PM, 배병민 (Bae Byoungmin) : 매니져님 안녕하세요 Roll 줘외후 132로드로 가는도중 TIM 센서 감지 되는 부분입니다. 알람은 별도 없으며 뮤팅하여 사용주입니다 May 20, 2025 at 4:29 PM, 강기훈 : 잠시 다른룸 점검 중이라 30분내로 코터 이동 예정입니다 이동할 때 연락드리겠습니다 May 20, 2025 at 4:34 PM, 배병민 (Bae Byoungmin) : 매니져님 죄송합니다. 제가 아직 본국 휴가중으로 현장에 없습니다. 해당부분 각도등 조정해보았지만 동일 등상으로 점검이 지체되고있어 확인 부탁드립니다. May 20, 2025 at 4:35 PM, 강기훈 : 현상 및 히스토리 현장 어느 분과 확인하면 될까요 May 20, 2025 at 4:35 PM, Baek Hojong(백호종)FA : 저랑하시면 되요 May 20, 2025 at 6:57 PM, 김주연 : @이연수 @문진영 매니저님, 노칭 플레이트 순환 운영안 CO 관련하여 미팅요청드렸습니다. 메일 확인 부탁드리고, 일정 변경 필요하신 경우 말씀해주세요! May 20, 2025 at 8:36 PM, 김주연 : 타 미팅과 일정이 겹쳐서 11시에 진행할까합니다! May 21, 2025 at 6:34 AM May 21, 2025 at 6:34 AM, KIM SEYEON [김세연]_FA : 2 photos May 21, 2025 at 6:35 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 어제 GF NC 음극 10호기가 같은 위치서 지속 멈추었습니다 금일 출근하시면 확인 부탁드립니다. May 21, 2025 at 6:35 AM, KIM SEYEON [김세연]_FA : 감사합니다. May 21, 2025 at 6:36 AM, 최대운 : 네 알겠습니다. May 21, 2025 at 6:54 AM, 최대운 : 평상시 안나다가 갑자기 장애물 감지하는 경우는 대부분 2가지입니다. 1. 간혹 오류가 발생하여 생기는 경우 인데, 그럴 경우 전원 껐다가 켜면 나아 질 수 있습니다. 2. RSL 뭐 묻어서 생기는 경우가 있어 손으로 닦으면 나아 질 수 있습니다. 비슷한 경우 발생하게 되면 상기 방안으로 조치도 한번 부탁드립니다. May 21, 2025 at 6:55 AM, KIM SEYEON [김세연]_FA : 네 위의내용을 전파하겠습니다. May 21, 2025 at 8:58 AM, 강기훈 : @KIM SEYEON [김세연]_FA @배병민 (Bae Byoungmin) 금일 모듈 셀완제품 남측 창고 34호기(휠교체호기) 관련 국내에서 담당자 내방하여 점검 예정입니다 오전 10시부터 작업예정이며, 티칭 위치, 부하율, 휠얼라인 점검 및 단동 테스트 예정입니다 해당시간에 CS인원 참관 가능하신지도 확인 부탁드립니다 May 21, 2025 at 8:58 AM, 강기훈 : @Kim Dongju(김동주)_FA May 21, 2025 at 9:30 AM, 이승엽 : @KIM SEYEON [김세연]_FA 2F Sandor 인가요? May 21, 2025 at 9:32 AM, 동휘 Donny : @KIM SEYEON [김세연]_FA 웹엑스 열어주시면 접속 하겠습니다 May 21, 2025 at 9:34 AM, 이승엽 : Sandor에소 기다리고 있습니더 May 21, 2025 at 9:37 AM, KIM SEYEON [김세연]_FA : 조금만 기다려주십시오 죄송합니다 May 21, 2025 at 9:40 AM, 이승엽 : @김희용 @권기홍 금일 오전 프리어사인 관련 미팅 원격접속 예정이신지요? 아니면 함께 회의실에서 진행 예정이신지요? May 21, 2025 at 9:40 AM, 이승엽 : 10시 May 21, 2025 at 9:52 AM, 김주연 : Zita 에서 하시죱! 11시에 이어서 노칭 시나리오 회의도 진행합니다 May 21, 2025 at 9:53 AM, 김주연 : @이승엽 @이연수 @정연동 먀니저님 웹액스 2번도 같이 열게요 May 21, 2025 at 10:03 AM, 최대운 : @KIM SEYEON [김세연]_FA 금일 조립동 소손 관련 1대 점검한 결과 3대/시간 정도 가능할것 같습니다. (1조/2인 기준) - 확인 내용 전원부 커버 탈착, 컨넥터 연결 상태 확인, 그을린 상태확인, 컨넥터 연결부 탄탄하게 조여 있는지 확인 후 조임 등 - 금일 1F 노칭 부터 진행 - 조립 AGV 158대 근무시간 기준 9-10일 소요 예정입니다. - 생산 호기는 시간이 더 소요 될것 같으며 우선 라인제외된 호기부터 진행하겠습니다. May 21, 2025 at 10:10 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 체크리스트로 관리해서 완료되면 주시고, 도움 필요하시면 말씀주십시오. May 21, 2025 at 10:45 AM, 문진영 : 혹시 어제 요청드린 정위치 도그 프로그램 횡전개 후 미생산 호기들 금일 오후부터 프레스 이재기 반송 점검 하려는데 EQ인원 지원 가능한지 확인되셨나요? May 21, 2025 at 10:46 AM, KIM SEYEON [김세연]_FA : 아직 확인 못했습니다. May 21, 2025 at 10:46 AM, KIM SEYEON [김세연]_FA : 백호종 피엠님한테 연락드리라고 하겠습니다 May 21, 2025 at 10:47 AM, 문진영 : 네. 감사합니다. @Baek Hojong(백호종)FA PM님 확인되시면 공유 부탁드립니다. May 21, 2025 at 10:57 AM, 김주연 : @정연동 @문진영 매니저님, 노칭 운영시나리오 미팅은 앞의 회의가 조금 길어져서 6시10분 (11시10분)에 시작하려하구요, 미팅링크가 겹쳐서 다시 생성했습니다. May 21, 2025 at 10:58 AM, 김주연 : 미팅번호 2513 446 6579 비밀번호 1234 입니다. May 21, 2025 at 11:11 AM, 김주연 : @문진영 @정연동 미팅번호 2516 174 9717 비밀번호 1234 May 21, 2025 at 12:52 PM, Baek Hojong(백호종)FA : @KIM SEYEON [김세연]_FA @문진영 전극 제조 김건희PM님과 명일 프레스 슬리터 UW 이재기 도그센서 테스트 협의결과 EQ설비 담당인원이 1명씩이라 생산에 대응하기 바쁘셔서 차주 화요일 주간 3명이서 근무하신다하여 이날 진행 요청하십니다 명일에도 한분이라 어려울거라 하십니다. 어떻게 해야할까요? May 21, 2025 at 12:58 PM, 문진영 : 차주는 월요일부터 코터 이재기 적용 및 횡전개 예정인데 혹시 내일 오전 EQ 터렛 원점(턴 안해도 됨), LR,UR 만이라도 잠깐씩 지원될 수 있게 부탁드립니다. 기본 구동 테스트는 완료되어 문제는 없으나 혹시 몰라 추가로 EQ연동 자동 반송 점검을 하려하는 겁니다. May 21, 2025 at 12:58 PM, 이승엽 : 1시 미팅 산도르죠? May 21, 2025 at 12:59 PM, KIM SEYEON [김세연]_FA : 지타로 오세요! May 21, 2025 at 3:05 PM, 문진영 : @KIM SEYEON [김세연]_FA PM님 제조쪽에서 잠깐씩이라도 지원 가능하도록 도움 좀 부탁드립니다. May 21, 2025 at 3:50 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @Lee Junghan(이정한)_CS 1. 조립동 소손관련 점검 시 명일부터 CS 인원 및 BP사 인원 2명이서 진행하겠습니다. CS인원은 이정한 매니저님이 인원 지정해서 알려주기로 하였습니다. 2. GF 노칭 로봇쪽 두라인 공간 벌릴 수 있는지 메일 요청 주시면 명일 오전부터라도 물리적으로 가능여부부터 확인 하겠습니다. OI TAS에 대한 대응의 일부라 판단하겠습니다. May 21, 2025 at 3:55 PM, JAEYOON KIM / CS : CS 인원 정주영 대리 인벌브 예정입니다. May 21, 2025 at 3:59 PM, 최대운 : 네 감사합니다. May 21, 2025 at 4:25 PM, Lee Junghan(이정한)_CS : SKCC CS가 아닌 JS쪽 CS 인원이 지원갈듯합니다. May 21, 2025 at 4:27 PM, 이승엽 : @KIM SEYEON [김세연]_FA @김희용 어찌되었던 보안 규정 미준수에 대해서는 향후에 재발하지 않도록 주의 하겠으나, 김상진 차장에 대한 조치에 대해서 완화 부탁 드립니다. 명일 및 이후 ACS 쪽 여러 사안들이 진행 예정이다보니, 김세연 PM님과는 이야기를 했는데 당장 명일 프리 어사인 적용을 하루 정도 미루면 어떨까 합니다. @김희용 @권기홍 May 21, 2025 at 4:33 PM, 박태영 invited 김 민성. May 21, 2025 at 4:43 PM, 이승엽 : @권기홍 @김희용 Pre-assign 적용을 당초 협의된 일정에서 일단 아래와 같이 변경일 필요할 듯 합니다. 사유는 적용이야 다임에서 하면 되겠지민 현장에서 대응은 김상진 차장이 진행이 필요한 상황에서 현 상태로 진행이 무리일 것으로 보입니다. 05/22 오전 9시 --> 05/23 혹은 차주 May 21, 2025 at 4:51 PM, 이승엽 : 의견 부탁 드립니다. 확인 되는대로 다임에게도 공유하도록 하겠습니다 May 21, 2025 at 4:56 PM, 이승엽 : @KIM SEYEON [김세연]_FA 신규 보안 계정 및 보안 PC 신청 관련해서는 기존에 연해리 PM님이 주관을 하신 것으로 확인이 되는데 현재 Fly Back 하신 상황이시죠? May 21, 2025 at 4:58 PM, 이승엽 : 그러면 절차대로 진행했을 때 담당자는 누구에게 신청을 하면 좋을까요? @KIM SEYEON [김세연]_FA May 21, 2025 at 4:58 PM, KIM SEYEON [김세연]_FA : 김동주피엠님 과 저에게 메일을 보내주십시오 May 21, 2025 at 5:05 PM, 이승엽 : 헝가리 쪽에서 DB 에 접속 가능한 2번 계정 발급 여부가 가능한지가 중요할 것 같은데, 이부분은.확인이.안됩니다. 혹시 @연해리 PM님. 확인이 기능하신가요? May 21, 2025 at 5:11 PM, 권기홍 : 일단은 제PC에서 CIM DB 접근은 가능합니다. May 21, 2025 at 5:12 PM, 권기홍 : 패치 일정은 내일 다시 정하는 것으로 하시죠 May 21, 2025 at 5:18 PM, 이승엽 : 네 알겠습니다. May 21, 2025 at 5:46 PM, 동휘 Donny : 현재 본인 아닌 다른분 유럽 VDI를 사용하시거나 본인 아이디가 없으신분들 중 유럽 VDI 필요하신 분들은 명단 (이름, 이메일) 취합해서 저에게 전송 부탁 드립니다. @이승엽 @Lee Junghan(이정한)_CS May 21, 2025 at 5:47 PM, Lee Junghan(이정한)_CS : 네 확인후 회신 드리겠습니다. May 21, 2025 at 9:43 PM, Jun(정우준)_SKOH FA : 동일 현상 재발 했습니다. 25/05/21 21:27:52 1. 16153->16154 화물 이동 중 2. 16155->16153 CV Run되면서 16153->16154 화물데이터 사라짐 May 21, 2025 at 9:44 PM, 심찬울 : 명일 확인해보겠습니다 May 21, 2025 at 9:44 PM, Jun(정우준)_SKOH FA : 시간 되실 때, 확인 한번 부탁드립니다. May 21, 2025 at 9:44 PM, Jun(정우준)_SKOH FA : 네, 감사합니다. May 22, 2025 at 8:22 AM May 22, 2025 at 8:22 AM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 금일 확인 시간 알려주시면 현장에 가보겠습니다. May 22, 2025 at 8:23 AM, KIM SEYEON [김세연]_FA : Photo May 22, 2025 at 8:23 AM, KIM SEYEON [김세연]_FA : Photo May 22, 2025 at 8:24 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 상기 플레이백도 봐주시고, 해결방안 고민해주세요. 다관절 앞 상하행선 넓히면 해결되는 문제인지도 금일 현장확인시 확인 부탁드립니다. May 22, 2025 at 8:25 AM, 최대운 : 네, 금일 노칭 보면서 같이 확인 하겠습니다. May 22, 2025 at 9:00 AM, 최대운 : 우선 확임 했으며, 고질적 문제는 아닙니다. 당연히 저희는 뒷편 안전을 고려하여 AGV 장애물로 인식하고 표시되는 부분이 맞습니다. 우선 금번 노칭 개선하면서 조금 더 원활하게 진행될 수 있게 보완은 하겠습니다. 고질적인 문제가 아니라 당연히 안전을 위해 고려 되었다고 생각해주시면 좋을것 같습니다. May 22, 2025 at 10:15 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @동현 명일 오전 10시 전극 분체에서 부터 AGV SAT Punch 현장점검 진행하려 합니다 하기 내용 참고 부탁드립니다. 1. 오전 10시 1층 분체 양극에서 진핼 2. 점검항목(하기순으로 진행예정) - 분체 AGV 범퍼 케이블 정리 및 주행 INVERTER 단자 마감 - GF Roll AGV IPS Sensor JIG - GF ST Door Padlock 교체 - 1F ST X축 LM Block 구리스 주입 시연 이후엔 좀 더 미리 공유 드릴 수 있도록 하겠습니다. May 22, 2025 at 10:50 AM, 최대운 : @KIM SEYEON [김세연]_FA @Baek Hojong(백호종)FA 현재 전극 코터 음극 4라인쪽 AGV가 충전기 도킹시 벽이랑 간섭이 있어 현재까지는 Roll AGV 사용을 못하도록 하였습니다. 금일 1대 호기 맵 수정하여 도킹까지는 확인 하였습니다. AGV 맵수정 횡전개 및 ACS 맵수정을 명일 오전에 진행하고자 합니다. 명일 오전 동안 모니터링 예정이나 벽이랑 가깝고 접근시 사선으로 들어가다 보니 혹시 생각지도 못한 에러가 일부 발생될 수 있습니다. (시행착오) 그럴 경우 지속적 대응과 보완토록 하겠습니다. 이점만 양해 바랍니다. May 22, 2025 at 10:51 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 시행착오를 겪더라도 나중에는 잘 되게 관심과 지원 부탁드립니다. May 22, 2025 at 10:52 AM, 최대운 : 네 알겠습니다. May 22, 2025 at 10:52 AM, Baek Hojong(백호종)FA : 알겠습니다 매니져님 확인 감사드립니다 May 22, 2025 at 11:10 AM, 최대운 : 음극 코터 12호기 장애물 감지 관련하여 바로 재연은 되지 않아 1차 차원에서 보완만 하고 투입 하였습니다. 혹시 운영 중 다시 발생하면 알려주십시오. 전극 같은 경우 RSL에 낮게 있어 이물질이 묻어 발생하는 경우가 있습니다. (청소 용품 등, 현장에서 직접 봄) 주변에 장애물 없는데 발생하는 경우, 1. RSL 주변을 우선 닦는걸 우선 권장(양쪽 모두) 2. 그래도 안되면 닦고, 전원 껐다가 다시 켜서 운영 확인 부탁드립니다. May 22, 2025 at 11:15 AM, 이승엽 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 김상진 차장 ID 및 보안 PC 신청서 메일 송부 드렸습니다. 확인 부탁 드립니다. May 22, 2025 at 11:41 AM, Baek Hojong(백호종)FA : 매니져님 12호기 지금 충전기쪽 충전기 앞에서 NO SCAN FROM REAR SCANNER 에러 발생하고 움직이지 않고 있습니다 재점검 요청드립니다 May 22, 2025 at 11:41 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 22, 2025 at 11:44 AM, 김희용 : @이승엽 @KIM SEYEON [김세연]_FA @동휘 Donny @박태영 그럼 명일에 GF ST Pre-Assign 적용해보시지요? May 22, 2025 at 11:44 AM, 최대운 : 현재 1F인데 담당자 바로 전달했습니다. 바로 확인 요청하겠습니다. May 22, 2025 at 11:45 AM, 이승엽 : 금요일 패치 진행 --> 주말 ... 부담이 좀 되긴 합니다만.. May 22, 2025 at 11:47 AM, 김희용 : 금요일 적용해보면 어차피 문제 있으면바로 나오지 않을까요? SK ON 출장자들 주말 나누어 출근합니다. 상황모니터링 같이할게요 May 22, 2025 at 12:18 PM, 최대운 : 근본 원인은 케이블 접촉 불량이였습니다. 조치는 했으나 명일 오전에 맵 업데이트 하면서 투입하여 좀 더 모니터링 하도록 하겠습니다. May 22, 2025 at 12:49 PM, 김희용 : GF ST 순환 CNV 16154 Track 아직 Data Loss. 반복발생중입니다. @Lee Junghan(이정한)_CS 혹시 해당내용 점검되어 조치예정인 내용이 있을까요? May 22, 2025 at 12:51 PM, Lee Junghan(이정한)_CS : 금일 2시에 심찬울매니저님과 같이 점검 예정입니다. May 22, 2025 at 1:08 PM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 지금 Data loss로 지속 막히고 있는데 2시보다 더 빨리 조치 가능할까요? 지금 이정한 매니저님은 GF ST로 가실겁니다. May 22, 2025 at 1:21 PM, 심찬울 : 현장들어가고있습니다 May 22, 2025 at 1:31 PM, KIM SEYEON [김세연]_FA : 감사합니다 May 22, 2025 at 3:06 PM, 심찬울 : 해당 트랙 32-165-164 data move조건, data move후 delete조건 수정하고 모니터링 완료했습네다. May 22, 2025 at 3:32 PM, KIM SEYEON [김세연]_FA : @Jun(정우준)_SKOH FA 피엠님 야간에 모니터링 부탁드립니다. May 22, 2025 at 3:38 PM, Jun(정우준)_SKOH FA : 네, 재발시 공유 하겠습니다. May 22, 2025 at 3:49 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 분체 음극 1호기 블랙박스 SD Card가 없고 판넿커버 및 SD Card자리 봉인지 뜯어져 있는데 혹시 온에서 작업하신건지 문의드립니다 May 22, 2025 at 3:57 PM, 이승엽 : 네 회신을 못 드렸는데 명일 오전 9시에 진행 예정입니다. May 22, 2025 at 4:01 PM, 김희용 : @최대운 매니저님 혹시 GF CA NC AGV#8 뭐 문제가 있을까요? 5/7부터 Line Out상태인데, 이반차 FA에서는 별도 아웃이력이 없다고해서 따로 점검을 위해 빼놓은건지 문의드립니다. May 22, 2025 at 4:16 PM, 최대운 : 그 시점에 일부 포트에서 전도 발생하여 티칭, 캘리브 등을 한번 더 점검은 해야될것 같아 우선 라인 아웃 시켰습니다. 살려야되는데, 여러가지 일이 겹치고 하다보니 아직 못하고 있습니다. May 22, 2025 at 4:19 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @동현 분체 양극 에이지비 4호기 자체 점검 및 테스트 완료하였습니다 명일 주간시간(09시 - 17시)동안 생산 투입 후 모니터링 진행할 예정이니 업무에 참고하시길 바랍니다 특이사항 1. 양극 분체 4호기 포크팁센서를 양극 1호기에 옮겨 달아서 현재 포크팁센서가 없습니다. 기존 양극 1호기에 쓰였던 센서 4호기로 원복 부탁드립니다 2. 명일 우선순위로 분체 4호기만 생산대응 진행하려 하며, 양극 생산량 및 AGV 작업율 감안하여 AGV 추가투입하며 모니터링 진행하겠습니다(전일, 금일 기준 생산량 적음) May 22, 2025 at 4:23 PM, KIM SEYEON [김세연]_FA : Photo May 22, 2025 at 4:24 PM, KIM SEYEON [김세연]_FA : @이연수 매니저님 상기 MCS DATA REPORT INCOMPLETE ERROR 없애려고 다관절포트에 업데이트 했던것 아닌가요? 아직도 발생하고 있습니다. May 22, 2025 at 4:32 PM, 문진영 : @KIM SEYEON [김세연]_FA PM님 금일 이재기 비생산 호기들은 EQ인원 지원 협조가 안되어 심찬울 매니저와 같이 C&C 반송 테스트 점검 했습니다. 이후 특이사항 있으시면 공유 부탁드립니다. 차주 코터 이재기는 사전 협의드리데로 26일부터 횡전개 진행하도록 하겠습니다. May 22, 2025 at 4:32 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 22, 2025 at 4:32 PM, KIM SEYEON [김세연]_FA : 전극이 바빠서 사람을 못뺀다고 합니다. May 22, 2025 at 4:39 PM, 문진영 : 추가로 제조에서 수동 생산 또는 클리닝 시 특히 Y축 정위치 도그 설치된 프로파일 밟지 않도록 주의 전달 부탁드립니다. May 22, 2025 at 5:09 PM, 이연수 : 상위보고 없이 플레이트가 창고로 입고되는 문제점이 있었는데 이를 해결하는 과정에서 알람을 추가한 게 mcs report incomplete 입니다. 이 알람이 없다면 정보누락으로 창고 자동반송이 안되는 문제가 발생하고, 반대로 이 알람을 추가하면 로봇 알람이 발생합니다. May 22, 2025 at 5:12 PM, 이연수 : 근본적으로 이 알람이 발생하지 않게해야 하는데 최종 패치가 금일 오전에 끝났으니 제 생각에는 며칠 지켜보고 판단해보시는 게 어떨까 합니다. May 22, 2025 at 5:18 PM, 최대운 : @KIM SEYEON [김세연]_FA @Lee Junghan(이정한)_CS 금일 전원부 점검할때 지원자분 오셨는데, 담당자분이 원래 참관만 하는거라고 말씀하시며 오늘은 도와 주겠다고 하셨다고 합니다. 명일부터는 확실하게 전달될 수 있게 부탁드립니다. 그리고 생각보다 시간이 더 소요 되고 있으니 이점은 양해 바랍니다. 필요에따라 다른 작업이 급한경우는 점검 수량이 적을 수 있습니다. May 22, 2025 at 5:19 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 커뮤니케이션 미스가 있었네요. 명일구터 같이 할수 있도록 전달하겠습니다. 감사합니다. May 22, 2025 at 5:21 PM, 최대운 : 금일은 2명 도움을 주셨는데, 가능하시다면 2명 지원 해주시면 좋을것 같습니다. 일별 상황에 따라 정해주시면 됩니다. May 22, 2025 at 5:26 PM, 최대운 : @KIM SEYEON [김세연]_FA @동현 명일 양극 생산 여부 확인 부탁드립니다. 생산 없으면 다른 작업하고 다른날로 투입 변경이 필요합니다. May 22, 2025 at 8:33 PM, 동현 : 양극 한 라인 생산있습니다~ May 23, 2025 at 2:01 AM May 23, 2025 at 2:01 AM, Jun(정우준)_SKOH FA : 25.05.22 01:21:48 16156->16160화물 진행시 16160에 UNK데이터 생성 16156에 캐리어아이디 없는 정크 데이터 남김. 16156->16160으로 진행하는 ★★거의 모든 화물 ★★ UNK로 캐리어 아이디 바뀌는 중입니다. May 23, 2025 at 2:02 AM, Jun(정우준)_SKOH FA : 25.05.22 23:56:15 16160->16159 화물 진행시 화물 넘어가면서, 16160 데이터 삭제 되고 16159 데이터는 기입 안되면서 데이터 로스 에러 발생 May 23, 2025 at 2:02 AM, Jun(정우준)_SKOH FA : 총 두가지 케이스 입니다. 1. 16156->16160진행시 UNK 2. 16160->16159진행시 데이터 삭제 May 23, 2025 at 3:33 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 6개라인 돌면 순환물류 감당이 안될것 같습니다. 로직에 문제가 있는것 같은데, 우선 상기문제는 ASAP으로 해결하고 나머지 컨베이어 넘버도 문제없는지 시너스텍 제어인원이 전체적으로 로직 좀 손봤으면 합니다. May 23, 2025 at 3:37 AM, KIM SEYEON [김세연]_FA : Photo May 23, 2025 at 8:28 AM, KIM SEYEON [김세연]_FA : @심찬울 매니저님 순환물류 관련 오전9시에 현장서 뵙겠습니다. 지금도 계속 발생중이라 문제가 큽니다. May 23, 2025 at 9:12 AM, KIM SEYEON [김세연]_FA : 양극1라인만 5월29일까지 생산있고, 6월1일까지는 생산이 없고, 6월2일부터 양극2라인만 생산 시작합니다. May 23, 2025 at 9:20 AM, 최대운 : 네, 금일 전극분체 4호기 투입하고 모니터링 예정입니다. 4호기만 운영할겁니다. 상황보고 부족하다 싶으면 추가 투입할게요~ May 23, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일은 데일리미팅 스킵하겠습니다. May 23, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 혹시 포크앞 푸쉬센서 mc부품 혹시 더 있을까요? 잃어버린것 같습니다. May 23, 2025 at 9:22 AM, 이승엽 : 네 알겠습니다. 아까 전화 주신 것 다시 전화 드렸는데 연결이 안되었는데 특별한 건은 아니신지요? May 23, 2025 at 9:29 AM, KIM SEYEON [김세연]_FA : 순환물류 때문에 연락드린겁니다. 순환물류에 심찬울M 권태영대리 지원부탁드립니다. May 23, 2025 at 9:32 AM, 이승엽 : 오전에 출근하자마자 바로 이야기 해서 현장 들어갔습니다 May 23, 2025 at 9:36 AM, KIM SEYEON [김세연]_FA : 감사합니다 ! May 23, 2025 at 9:53 AM, 최대운 : 누군가 8호기 투입을 시킨거 같습니다. PM님이 투입 시키신건가요? 아니면 라인 아웃 시키고 저희가 추루 점검 완료 되면 투입시켜도 될까요? May 23, 2025 at 9:55 AM, KIM SEYEON [김세연]_FA : 네 점검하고 완료되면 투입부탁드립니다. 1라인 3라인 sop로 물동량이 계속 늘어날테니 있으니 빠르게 점검해주세요 May 23, 2025 at 9:55 AM, 김희용 : 제가하진 않았습니다. 아마 현장에서 투입시킨듯하고 점검하고 널어주시면 감사드리겠습니다 May 23, 2025 at 9:57 AM, KIM SEYEON [김세연]_FA : 네 넣지말라고 전파하겠습니다. May 23, 2025 at 10:50 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 GF 전극코터 음극 4라인쪽 충전기를 코터용 AGV도 할 수 있게 업데이트 하고자 할려고 보니 주변에 자재가 많습니다. 충전기 쪽에도 자재가 많아 지금 진행하고 모니터링은 어렵습니다. AGV 업데이트 진행은 하나 충전은 막아 두겠습니다. 자재 정리해주시면 오후에 모니터링은 가능합니다. May 23, 2025 at 11:15 AM, 최대운 : 1. GF 노칭 양극 51번 노드 구간 뒷편 RSL 감지영역 축소 했습니다. 매뉴얼상태에서는 문제 없는것 확인 했습니다. 혹시 생산 시에 발생하면 알려주세요. 추가 조치 하겠습니다. 전호기 횡전개도 완료 하였습니다. 2. 8호기는 잠시 라인 아웃 했으며, 점검 후 공유 드리겠습니다. May 23, 2025 at 12:19 PM, 권기홍 : 현재 GF 4,5,6 STACK 적용상태 PreAssign 적용, ChangeThreshold : 1분 이적재 Cost 1분 맞죠? May 23, 2025 at 12:21 PM, 이승엽 : 네 맞습니다 12시 정각에 적용했습니다 May 23, 2025 at 1:57 PM, 최대운 : @KIM SEYEON [김세연]_FA GF 노칭 어제 AGV 관련 변경한거 하나도 없습니다. 중요하게 변경이 필요했으면 오늘처럼 공유허고 진행합니다. May 23, 2025 at 2:29 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. May 23, 2025 at 4:04 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 GF Stacking 북측 AGV 9호기 (6라인 그룹화) 점검 결과 1. 속도는 다른 호기랑 동일합니다. stacking station 진입시 RSL 감지로 감속한다고 보시면 됩니다. 스테이션과 스테이션 사이는 정상 속도로 운영 중입니다. 1F, GF도 모두 스테이선 구간에 기둥 등도 있어서 협소하다보니 정속도는 못내는 구간이 많습니다. 이점은 저희도 변경할 수는 없는 상황입니다. (사고 우려) 2. 339~342노드에서 얼라인 에러등이 발생한 이유 - 티칭값이 240-250mm 거리인데 너무 스테이션과 붙어있어서 (230-240mm) 에러가 자주 발생했습니다. - 4개 노드에 대해서는 스테이션과 옵셋으로 20mm 띄웠습니다. - 얼마전에 보내드린 ODSL 조치 자료에 좋은 예라고 보시면 됩니다. - 나머지 라인도 애매하게 붙어서 다니기에 명일 10mm씩 옵셋으로 띄울 예정입니다. (현재 문제는 없지만 조금 May 23, 2025 at 4:39 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @동현 분체 양극 4호기 금일 오전 10시에 투입하여 현재까지 생산대응 중이며 진행상황 공유 드립니다 1. 금일 총 6회 반송 진행 시 특이사항 없음 - 에러발생 및 이적재 올라탐 없음 - 사선주행 및 주행간 특이사항 없음 2. 17시 이후 3호기와 스왑하여 라인아웃 예정 3. 명일까지 현장상주 및 자체 모니터링 예정 4. 포크팁센서 현재 미설치 및 스페어 보유분 없음 확인 이상입니다. May 23, 2025 at 4:47 PM, 김희용 : 확인 요청드립니다. 5/23 E0STKA51_P02 (5/23 10:47 부터 SCS/CCS Play back 확인요망) 1. E0STKA51_P02로 C01이 로딩완료(LTA1192) 2.RTVRuntimeOver발생(거의동시) - RTV Car 3.RTV 정상화 후 P02(7049)->7055로 안감 - 5시간 가량 4. 16:29 확인 시화물이걸려있었으나 Alarm 미발생으로 있었음 (7049 -> 7055) May 23, 2025 at 4:48 PM, 김희용 : CS분들께도 함께 공유하였습니다 May 23, 2025 at 8:43 PM, KIM SEYEON [김세연]_FA : Photo May 23, 2025 at 8:44 PM, KIM SEYEON [김세연]_FA : Photo May 23, 2025 at 8:45 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 GF AN 순환물류 목적지 삭제되는 현상 재발되었습니다. May 23, 2025 at 8:46 PM, 이승엽 : 제어 딤당자에게 명일 다시 재확인 요청하도록 하겠습니다. May 23, 2025 at 8:49 PM, KIM SEYEON [김세연]_FA : Photo May 23, 2025 at 8:50 PM, KIM SEYEON [김세연]_FA : Photo May 23, 2025 at 8:50 PM, KIM SEYEON [김세연]_FA : 우선 참고 부탁드립니다. 상황이 급박하면 연락드리겠습니다. May 23, 2025 at 9:01 PM, KIM SEYEON [김세연]_FA : @이연수 매니저님 목적지를 어떻게 입력하는게 맞는 조치방법인가요? May 23, 2025 at 9:09 PM, 이연수 : CCS화면에서 TransferList에서 잡 삭제 -> 매뉴얼 잡 생성 하면 목적지 새로 Write 합니다 May 23, 2025 at 9:10 PM, 이연수 : Dest point 비트가 on인것 확인하시고요 May 23, 2025 at 9:19 PM, 이연수 : 기존에는 TransferList 에서 목적지 Edit하면 되었으나 그게 MCS 처리에 문제가 생겨서 지금은 아예 기존잡 삭제하고 새로 매뉴얼 잡 만들어야 목적지 쓰도록 변경되었습니다. May 23, 2025 at 9:40 PM, 이연수 : 이게 원인의 전부인지는 모르겠으나 Operator 사용자가 또 offline 버튼 눌러서 목적지 못받은 상황이 확인됩니다. 수정될 때까지 당분간은 사용자 주의를 당부드립니다. May 23, 2025 at 9:41 PM, KIM SEYEON [김세연]_FA : operator 사용자가 누군지 확인 안됩니다. system상으로 권한을 회수해야합니다. May 24, 2025 at 11:58 AM May 24, 2025 at 11:58 AM, KIM SEYEON [김세연]_FA : 2 photos May 24, 2025 at 12:05 PM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 순환물류 점검 가능할까요? May 24, 2025 at 12:09 PM, 이승엽 : 네 금일 점검 진행하는 것으로 알고 있습니다. May 24, 2025 at 12:16 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @동현 1. GF Stacking 북측 AGV 9호기 6라인쪽 Station과 거리 등 재확인 결과, 크게 문제 없음을 확인 하였습니다. 너무 가깝게 이동하면 옵셋 작업을 진행하고자 했으나 문제 없어 수정하지 않았습니다. 2. 전극 분체 09:00~ 4호기 투입하여 문제 없이 이동하는거 재확인 하였습니다.(4회반송) 지금은 생산이 없어 4호기는 대기 장소에 라인 아웃하였으며, 1-3호기 오토 상태입니다. 3. 포크 앞 범퍼센서 확인 했는데, BP사도 여유 자재가 없네요. May 24, 2025 at 2:59 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 지석범 피엠님이 27일 주간에 출근이 가능한데 27일에 상기건 진행가능할까요? May 24, 2025 at 4:50 PM, 문진영 : 저희가 5월 말까지 완료 필요해서 우선 코터 이재기 별도 변경점 없으시면 현장 plc기준 업데이트해서 26일부터 진행하면 안될까요? May 24, 2025 at 5:29 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 24, 2025 at 5:31 PM, 문진영 : 감사합니다. May 25, 2025 at 4:47 PM May 25, 2025 at 4:47 PM, 김희용 : @최대운 @이연수 GF AN NC AGV 동선관련 변경 테스트해보았으면 하는 Segment 변경 및 Node추가안 하나 멜 드렸습니다. 월요일 한번 확인부탁드리겠습니다 May 26, 2025 at 7:40 AM May 26, 2025 at 7:40 AM, 김상훈 : 멀테웨이는 금주 목요일 오전이나, 금요일에 미팅하기로 했어요 May 26, 2025 at 7:40 AM, 김상훈 : 찾아온대네 May 26, 2025 at 7:42 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리는 09시30분 금일 준공회의는 16시에 진행합니다. @행정동2F sandor 회의실 May 26, 2025 at 7:42 AM, 이승엽 : 네 알겠습니다 May 26, 2025 at 9:24 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @동현 @박시우 금일 오전 10시 30분부터 전극조립 AGV SAT Punch 현장점검 예정이며, 하기 내용 참고 바랍니다. 1. 오전 10시 30분 VD GF 음극에서 진행 2. 점검항목(하기 순으로 진행 예정) - GF/1F VD AGV Padlock - GF/1F 조립 AGV Side Door Sticker 이상입니다. May 26, 2025 at 10:21 AM, 문진영 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) PM님 혹시 코터 이재기 PLC 프로그램 법인에서 무슨 작업 중이신가요? May 26, 2025 at 11:58 AM, Jun(정우준)_SKOH FA : 1F 순환물류에 화물이 16345에서 무언정지 중인데 프로그램 확인 부탁드립니다. 25.05.26 11:42 MLA0246화물 16345 도착 후 무언정지 11:53 다른 화물이 16343에 도착 후에 16345에 정지 중이던 화물 진행. May 26, 2025 at 12:06 PM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 플레이백 확인후 회신 부탁드립니다. May 26, 2025 at 1:43 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 회의 시 말씀드린 GF 노칭 음극 AGV AP 통신간 검색 시간 0.5초를 1초로 변경하여 AP 부하를 낮추는 방안으로 우선 조치하도록 하겠습니다. May 26, 2025 at 1:44 PM, KIM SEYEON [김세연]_FA : 변경점 관리방에 올리고 진행하시죠 양극은 필요 없을까요? May 26, 2025 at 1:46 PM, 최대운 : 우선 양극은 아직 이상은 없어 비교도 할겸 두는게 어떨까싶습니다. 음극이 문제 없음이 나오면 양극도 그때 변경하도록 하겠습니다. May 26, 2025 at 1:48 PM, Jun(정우준)_SKOH FA : 오늘 양극도 통신 끊김 발생하긴 했었습니다. 25.05.26 07:05 GF NC CA AGV 통신끊김 현상 재발생 AGV3호기, 로봇3호기 앞 152 노드. May 26, 2025 at 1:49 PM, Jun(정우준)_SKOH FA : 참고바랍니다. May 26, 2025 at 1:52 PM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @동현 GF CA NC 은 포크가 길어 전도 위험이 있다보니 다른 설비에 비해 EQ와의 ODSL 거리가 280mm 값보다 떨어져 있으면, Hardware limit 또는 [ERROR]FORK1 GENETIC 에러가 발생합니다. 그래서 옵셋 주는 상황이 발생하시면 280mm 넘지 않도록 내부 주의 부탁드립니다. 양극 4호기가 이런 에러가 발생하여 옵셋을 재조정하였습니다. 참고 바랍니다. May 26, 2025 at 1:55 PM, 최대운 : 양극도 적용하도록 하겠습니다. May 26, 2025 at 2:09 PM, 문진영 : CCS 플레이백으로는 정확한 원인 파악이 어려운데 345 ->342 이동 조건 중 342 DV UP조건도 보는데 당시 디버터가 다운 상태였을 걸로 추정됩니다. 정확한 상황은 추후 모니터링하면서 확인 좀 해보겠습니다. May 26, 2025 at 2:13 PM, 권기홍 : GF NC VC06 지금 C2NCA020_P02에서 계속 못뜨는거 같은데 사유 확인할 수 있을까요? May 26, 2025 at 2:14 PM, 권기홍 : 아까도 LD/UD TIMEOUT 발생했었는데 May 26, 2025 at 2:14 PM, 권기홍 : 한바퀴 돌아서 다시 시도해도 또 뜨네요 May 26, 2025 at 2:15 PM, 권기홍 : 다시 시도하러 갔습니다 May 26, 2025 at 2:19 PM, 권기홍 : 이번엔 떴네요. May 26, 2025 at 2:25 PM, 권기홍 : 13:33에 UR 발생, 13:56 1차시도, 14:03, 14:13 실패, 14:18 성공 May 26, 2025 at 2:47 PM, 최대운 : 너무 가까이 배치되거나 그럼 발생할 수 있습니다. 플레이백으로는 명확인 사유는 찾기가 어렵네요. 수동으로 보내보고 체크 해보겠습니다. May 26, 2025 at 2:53 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF 노칭 음극 턴하는동안 맞은편 AGV 이동가능하게 맵수정, RSL 반영(기존보다는 축소) 반영해서 적용할지 여부 알려주세요. 맵수정시 오전에 말씀드린 2, 3번 로봇 레이아웃도 변경 오늘 결정 주시면 수요일 오전에 적용하여 모니터링 가능합니다. May 26, 2025 at 3:00 PM, KIM SEYEON [김세연]_FA : 메일로 간단하게 정리해서 주실수 있을까요? May 26, 2025 at 3:03 PM, 최대운 : 지난번에 도면에 표시해드린거 말고 또 보내드려야되나요? May 26, 2025 at 3:27 PM, 최대운 : 확인 결과 2라인쪽에서 티칭 옵셋을 테크니션에서 적용했다고 하네요. 근데 지금 6호기는 문제 될만해서 옵셋 새로 반영 하였습니다. 2포트만 적용했습니다. May 26, 2025 at 3:38 PM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA GF VD 음극 2호기 포크 1단 인플레이스센서 브라켓 휨(이전에 충돌로 브라켓 변경된 것 같음)으로 정상 케이스에서도 인플레이스 에러뜨고 있는것 같습니다. 브라켓 교체가 필요해보입니다. May 26, 2025 at 4:02 PM, 이승엽 : @KIM SEYEON [김세연]_FA 산도르 왔습니다. May 26, 2025 at 4:18 PM, 김희용 : @최대운 @이연수 매니저님들 명일 아침에 음극 노칭 Groupping 해제 부탁드립니다 (양극은 유지) Pre-assign 적용후에 Groupping 영향성좀 보아야할거같아서 요청드립니다. May 26, 2025 at 10:48 PM, KIM SEYEON [김세연]_FA : @이연수 매니저님 명일 daily 회의시에는 하기현상 원인분석 및 개선 논의했음 합니다. May 26, 2025 at 10:48 PM, KIM SEYEON [김세연]_FA : Photo May 26, 2025 at 10:48 PM, KIM SEYEON [김세연]_FA : Photo May 27, 2025 at 8:44 AM May 27, 2025 at 8:44 AM, 강기훈 : @동현 @김희래 @박시우 @김희용 @KIM SEYEON [김세연]_FA 서동현 피엠님, 1층 장폭롤 테스트 및 택타임 측정 위해 하기 사항 요청드리오니 확인 부탁드립니다 1. 1F 양극 장폭롤 에이지비 이동동선간 ASD 센서감지 및 Open 안됨 2. 1F 양음극 롤창고 이재기 주변 트레이 및 대차등 잡자재 정리 필요 May 27, 2025 at 9:25 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리는 9시반 행정동2F saodro입니다. May 27, 2025 at 9:33 AM, 김희용 : @최대운 @이연수 1.GF NC ROOM 음극 AGV Groupping 해제 Remind요청드립니다 May 27, 2025 at 9:35 AM, KIM SEYEON [김세연]_FA : Photo May 27, 2025 at 9:36 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 1F ST AGV 10호기 라인아웃인데 현상 확인 부탁드립니다. May 27, 2025 at 9:37 AM, KIM SEYEON [김세연]_FA : 에러명은 position initial loss 이네요 May 27, 2025 at 9:40 AM, 최대운 : 지금 진행하겠습니다. 담당자분이 다른걸로 바빠서 조금 늦었습니다. May 27, 2025 at 9:43 AM, 최대운 : 네, 오후에 점검하겠습니다. 한번 발생했는데, 라인아웃 되어 있네요. 확인 후 포지션 잡는 매뉴알이 있으면 공유 드리도록 하겠습니다. May 27, 2025 at 9:57 AM, 최대운 : 지금 적용 되었습니다. May 27, 2025 at 10:00 AM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 전극분체 AGV 포크 앞 범퍼 블럭 도면 전달 드렸습니다. May 27, 2025 at 10:03 AM, KIM SEYEON [김세연]_FA : 감사합니다 May 27, 2025 at 10:04 AM, KIM SEYEON [김세연]_FA : 해당에러는 AGV alarm 조치 메뉴얼에 없네요. May 27, 2025 at 10:04 AM, KIM SEYEON [김세연]_FA : 전달해주시면 교육도 해보겠습니다. May 27, 2025 at 10:39 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 1. GF 노칭 음극 적용여부 관련 메일 전달 드렸습니다. 2. 금일 Stacking buffer 운영 관련 미팅 진행 여부 알려주십시오 May 27, 2025 at 11:19 AM, 동현 : 음극 ASD 작동 확인하였고, 롤창고 주변 AGV 주행동선 방해 부위 잡자재는 정리했습니다. 참조바랍니다. May 27, 2025 at 11:31 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 금일 15시 행정동2F sandor 회의실서 하겠습니다. May 27, 2025 at 11:45 AM, 최대운 : @KIM SEYEON [김세연]_FA @강기훈 @지석범PM (이반차FA) 금일 오후 2시에 코터에서 리트라이 문제되는 호기들 같이 점검 하도록 하겠습니다. 지석범pm과 같이 협의를 통해 이재기에서 전달한 값이 제대로 반영되는지도 같이 확인하겠습니다. May 27, 2025 at 11:46 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 27, 2025 at 11:58 AM, Jun(정우준)_SKOH FA : @문진영 매니저님 순환물류 목적지 사라짐으로 무언정지 이슈 발생했는데 확인 한번 부탁드립니다. 25.05.27 11:36:55 MLC3088 16148->16150 단일 화물 정상 진행 중 목적지 사라지면서 무언정지 발생. May 27, 2025 at 12:00 PM, 문진영 : 저도 현장 확인 후 해당 사항은 CCS쪽에 사유 확인 요청했습니다. May 27, 2025 at 12:01 PM, Jun(정우준)_SKOH FA : 감사합니다~! May 27, 2025 at 12:01 PM, 문진영 : 우선 매뉴얼 반송 잡 생성해서 기존 잡에 있던 목적지 포트로 반송 진행했습니다. May 27, 2025 at 12:09 PM, 심찬울 : User : operator / ip add : 10.97.47.73 11시36뷴52초에 command remove했습니다 May 27, 2025 at 12:11 PM, Jun(정우준)_SKOH FA : 네 확인했습니다. 감사합니다. May 27, 2025 at 2:12 PM, KIM SEYEON [김세연]_FA : @문진영 매니저님 C1CNV072 16169 화물 목적지 있는데 왜 진행 안하는지 원인파악이 필요합니다. May 27, 2025 at 2:16 PM, 문진영 : 최초 매뉴얼 포트 출고화물이 점유하고 있는 상태로 오토 포트 반송 화물과 매뉴얼 포트 목적지 화물이 맥스 수량까지 차면서 반송이 막혔습니다. May 27, 2025 at 4:47 PM, 강기훈 : GF 코터 AGV 점검현황 공유드립니다 양극 1. 2, 17호기 1라인 2nd Retry 관련 티칭점검 및 생산 모니터링 시 이상없이 진행 확인(위더스 인원분들께 2, 17호기 위주로 이적재하며 모니터링 부탁드림) 2. 2, 4, 8, 17, 19, 22호기 총 6대 생산대응 중 3. 3호기 프로그램 업데이트 및 점검완료로 이후 생산호기 문제 시 스왑가능 음극 1. 12호기 RSL 접속불량 점검완료 후 투입 2. 2, 4, 9, 12, 16, 20호기 총 6대 생산대응 중 3. 3호기 리트라이 명일 점검예정 @Baek Hojong(백호종)FA May 27, 2025 at 5:49 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 27, 2025 at 5:49 PM, KIM SEYEON [김세연]_FA : 이 현상은 개선을 어떻게 해야 하는건지요? May 27, 2025 at 6:12 PM, 문진영 : 상황 조치 방법은 현장에서 정우준PM님께 공유 드렸습니다. May 27, 2025 at 6:48 PM, Jun(정우준)_SKOH FA : 네, 내용 공유했습니다. May 28, 2025 at 7:33 AM May 28, 2025 at 7:33 AM, Jun(정우준)_SKOH FA : @문진영 매니저님 해당 건 확인 부탁드립니다. 1F AN 16250 순환물류 무언정지 발생 건 25.05.28 06:58:20 MLC9243 16246->16243으로 진행 중 16246에 목적지 정보 남김. 그이후 뒤의 화물 모두 블락 발생. May 28, 2025 at 7:34 AM, 문진영 : 확인해보겠습니다. May 28, 2025 at 7:34 AM, KIM SEYEON [김세연]_FA : 출근하시면 바로 확인부탁드립니다 정우준피엠 현장에 있습니다. May 28, 2025 at 7:34 AM, Jun(정우준)_SKOH FA : 목적지 데이터 지우고 현재는 정상 가동 중이니 참고 바랍니다. May 28, 2025 at 8:21 AM, 문진영 : 플레이백과 OP LOG 확인 시 해당 화물 작업자가 6시 57분경 오토 상태에서 remove, install 진행해서 발생 한 건입니다. 주의 당부 부탁드립니다. operator 10.97.47.44 계정입니다. 혹시 CCS통해 데이터를 이동하려면 해당 트랙 퍼즈 잡고 화물 정위치 확인 후 진행하거나 매뉴얼 전환 후 진행하도록 가이드 부탁드립니다. May 28, 2025 at 8:25 AM, 문진영 : 또한 항후 해당 상황 발생 시 요청하시기 전에 플레이백과 OP LOG 함께 확인하시면 원인 파악이 어느정도 가능하기에 참고 부탁드립니다. May 28, 2025 at 8:27 AM, Jun(정우준)_SKOH FA : 확인 감사합니다~! 다음엔 해당 부분도 참고해서 요청드리겠습니다 May 28, 2025 at 8:30 AM, 문진영 : 네! 해당 상황 조치를 잘 해주셔서 감사합니다. May 28, 2025 at 8:47 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리는 부문장님 회의로 11시에 하시지요. May 28, 2025 at 8:47 AM, KIM SEYEON [김세연]_FA : 행정동2F 산도르로 오시면 됩니다. May 28, 2025 at 8:49 AM, 지석범PM (이반차FA) : 실제 무언정지가 발생한 사유는 16250트랙과는 무관하게 16246에 트랙킹 데이터(목적지 데이터)가 남아서 발생하였습니다. 말씀하신 16250,16251에서는 정상 동작되었습니다. May 28, 2025 at 8:56 AM, 문진영 : 화물 이동 중 데이터 수정 조치를 하는 과정에서 발생되어 말씀드린 겁니다. May 28, 2025 at 9:21 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @박태영 @동휘 Donny 금일 데일리시 어제 미팅한 버퍼 스테이션 관련 미팅 같이 진행했으면 합니다. 가능하실까요? May 28, 2025 at 11:27 AM, 최대운 : 금일 스테킹 버퍼 관련 미팅은 오후 3시로 변경되어 3시까지 방문하겠습니다. May 28, 2025 at 11:28 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리는 캔슬합니다. May 28, 2025 at 12:04 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 양극 분체 2라인 5.31(토) 가동합니다. 이때 분체 양극 AGV 4호기 투입 및 모니터링 부탁드립니다. May 28, 2025 at 12:05 PM, 최대운 : 6/2일날 투입해도 될까요? May 28, 2025 at 12:12 PM, 김희래 : @이연수 @최대운 매니저님. Pre assign 기능 효과 확인하기위해 GF 양극 노칭 AGV, 4,5,6라인 스태킹 AGV쪽 그룹핑 해제하고자합니다. 적용하시고 공유 부탁드리겠습니다. May 28, 2025 at 12:16 PM, KIM SEYEON [김세연]_FA : 5월30일 30파레트 6월1일 30파레트 6월2일 15파레트라서 고민되네요. May 28, 2025 at 12:31 PM, 최대운 : 6/2일 투입하고 추후에 일정 잡히면 또 투입하면 될것 같습니다. May 28, 2025 at 12:43 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 28, 2025 at 1:37 PM, 김희용 : @이연수 @문진영 GF ST 순환물류 Run time Over 발생했는데(16049) 순서상 16050의 MLA6189 이 16049로 나와야하는거같은데 16051의 MLC2065의 자재를 받는방향으로 디버터가 동작했습니다. MLC2065를 스톱센서 뒤쪽으로 빼주고 조치됬는데 내용 확인좀 브탁드립니다. 시간 13:25 전후로 보면될것같습니다 May 28, 2025 at 2:37 PM, 강기훈 : This message was deleted. May 28, 2025 at 3:00 PM, 이연수 : 내일 오전 10시에 가능합니다. May 28, 2025 at 3:00 PM, 김희래 : 넵 내일 10시에 적용 부탁드립니다. May 28, 2025 at 5:19 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF NC 양극 8호기 티칭 완료 후 라인 투입했습니다. 야간 담당자 분께 혹시 모르니 참고 해달라고 요청 바랍니다. May 29, 2025 at 8:15 AM May 29, 2025 at 8:15 AM, 권기홍 : 안녕하세요. 금일 ACS패치 09:00 진행 맞으실까요? May 29, 2025 at 8:18 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리회의 09시반에 행정동2F sandor에서 실시합니다. 준공회의는 5.30 금 15시에 행정동2F sandor에서 실시하겠습니다. May 29, 2025 at 8:21 AM, 권기홍 : This message was deleted. May 29, 2025 at 8:23 AM, 권기홍 : @이연수 매니저님 금일 ACS 패치 일정, 진행상황 확인을 위한 카톡방 하나 만들어주세요. May 29, 2025 at 8:23 AM, 이연수 : PreAssign 신버전 패치 계획입니다. ㅡ 09시 노칭 맵변경 시 진행 ㅡ 10시 스태킹 그룹해제 시 진행 ㅡ 나머지 룸은 그 이후 진행 May 29, 2025 at 8:27 AM, 김희래 : 1. 9시 : 음극 노칭 맵변경,Preassign 패치 2. 10시 : 스태킹4,5,6측 Preassign 패치 3. 그 이후 : 나머지 룸 패치 매니저님. 3번 이후 패치 때 어제 말씀드린 양극 노칭 그룹핑해제도 같이 진행인가요?? May 29, 2025 at 8:30 AM, 이연수 : 노칭은 9시 일괄 진행입니다. 그룹핑해제 포함.. May 29, 2025 at 8:32 AM, KIM SEYEON [김세연]_FA : 피엠님 이건 저희 변경점 카톡방을 활용할까요? @권기홍 May 29, 2025 at 8:38 AM, 김희용 : 변경점방에 올리고 진행 바랍니다 May 29, 2025 at 2:26 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 전극코터 음극 12호기는 여러 방법으로 RSL 문제를 해결하고자 하였으나 조치가 안되네요. 교체가 필요할 것 같습니다. May 29, 2025 at 5:44 PM, 김희래 : @이연수 매니저님. 음극51호기 창고 무언정지로 반송 밀려있는 상태입니다. 푸는 방법 알려주세요. May 29, 2025 at 5:48 PM, 김희래 : @이연수 희용피엠이랑 확인해서 풀었습니다 May 29, 2025 at 5:50 PM, 박태영 : 원인은 뭔가요? May 29, 2025 at 5:51 PM, 김희래 : 이전에도 났었다고 전달받았는데 크레인 1,2호기 서로 위치 근접해서 무언정지상태였습니다. May 29, 2025 at 5:53 PM, KIM SEYEON [김세연]_FA : 금일 Daily시에도 다뤘는데, 적용일정 (6.5) 좀 당길수 있는지 확인부탁드립니다. May 29, 2025 at 5:59 PM, 이연수 : 내일 출근하면 요청해보겠습니다. May 29, 2025 at 6:00 PM, 김희래 : 매니저님 크레인 가동시 CIM에서 초록색, 하늘색, 보라색, 노란색으로 색깔 변하는데 각 색깔이 의미하는바가 무엇인지 공유 부탁드립니다. May 29, 2025 at 6:02 PM, JAEYOON KIM / CS : SCS 화면 우측의 State와 Sample 탭 중, Sample 탭에 보시면 크레인 상태에 따른 색상설명이 나와 있습니다. May 29, 2025 at 6:03 PM, 김희래 : 네 감사합니다 May 29, 2025 at 6:33 PM, 김희용 : @KIM SEYEON [김세연]_FA @이승엽 명일 10:30 VD미건조 관련 미팅 요청메일 포워드 드렸습니다 May 29, 2025 at 6:35 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 May 30, 2025 at 7:00 AM May 30, 2025 at 7:00 AM, Jun(정우준)_SKOH FA : GF ST 순환물류 화물 택타임 증가 이슈 25.05.30 06:13 P16 MLC9133 25.05.30 04:31 P18 MLC3137 4,5,6라인용 양극 자재가, 음극 순환물류로 이동되며 택타임 20분 이상 증가. (정상 반송의경우 5분 이하) @문진영 매니저님, OP Action, RTD log특이사항 없고 컨베이어에서 화물 병목에 따라 목적지를 음극으로 보내는 것 같은데 확인 부탁드립니다. May 30, 2025 at 8:07 AM, 문진영 : 리프트쪽 숏컷 구간의 트랙에 화물이 차면 동관 리프트로 넘어가서 순환합니다. May 30, 2025 at 8:11 AM, Jun(정우준)_SKOH FA : 혹시 플레이백 봐주실수 있나요?? GF 4,5,6라인 양극 자재가 많이 부족했고 어제 이력을 보니 다수 동간 리프트로 넘어갔는데, 추후에 분명 문제로 대두될것 같습니다. May 30, 2025 at 8:13 AM, 문진영 : 그럼 RTD 반송 수량을 1+2에서 최근 1+3으로 증가하신걸로 알고 있는데 수량을 감소 시켜서 해당 상황이 최소화 되도록 하면 좋을 듯 합니다. May 30, 2025 at 8:17 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 금일 09시반 데일리회의시 논의하시지요. May 30, 2025 at 8:38 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 전극 코터 음극 1번충전기에 charging time over가 많습니다. 길막으로 야간에 문제도었습니다. 주간에 점검 부탁드립니다. 음극 2번충전기는 막혀 있던데 이유가 있을까요? 음극 2번을 사용하는게 차라리 나을것 같아서요. May 30, 2025 at 8:46 AM, 최대운 : 1. 1번 충전기 점검 전일 했을때는 문제되는 1대호기 밖에 없어서 조치는 했었습니다. Data 확인 해보겠습니다. 2. 2번 충전기는 접근 가능하게 맵 수정은 완료 하였으나 테스트는 못했습니다. 1-2주전에 완료했다고 공유 드렸으며 주변 자재로 테스트도 못한다고 말씀드렸습니다. May 30, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : 2번쪽 자재는 치우고 지속 관리하겠습니다. 테스트는 자재 치우면 바로 가능한거죠? May 30, 2025 at 9:10 AM, 최대운 : 네 금일은 전극 코터에 있을 예정이여서 바로 치워주시면 오전부터 점검 할수 있습니다. 빨리 조치 해주시면 점검하기 더 좋을것 같습니다. May 30, 2025 at 9:14 AM, 동현 : @KIM SEYEON [김세연]_FA @이승엽 금일 10:30 BCR 설치 일정 수립 회의 관련 sandor 회의실에서 데일리회의 이후 진행하면 될꺼같습니다. May 30, 2025 at 9:33 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 행정동2층 sandor 회의실에서 진행합니다. May 30, 2025 at 9:34 AM, 이승엽 : 일단 문매니저님 멐저 가실 예정입니다 May 30, 2025 at 9:34 AM, 이승엽 : 화징실에 잠깐 May 30, 2025 at 9:34 AM, KIM SEYEON [김세연]_FA : 넵 May 30, 2025 at 10:13 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 현장정리 완료되었습니다. 충전기 2번 테스트 진행부탁드립니다. May 30, 2025 at 10:22 AM, 최대운 : 네 현장에 담당자 있어 바로 진행하겠습니다. May 30, 2025 at 12:52 PM, 이승엽 : @KIM SEYEON [김세연]_FA 준공회의는 5.30 금 15시에 진행 예정이시죠?. May 30, 2025 at 12:53 PM, KIM SEYEON [김세연]_FA : 네 2F 산도르 회의실로 오세요 May 30, 2025 at 2:26 PM, KIM SEYEON [김세연]_FA : Photo May 30, 2025 at 2:27 PM, KIM SEYEON [김세연]_FA : @Jun(정우준)_SKOH FA 피엠님 현장 확인결과 공유 부탁드립니다. May 30, 2025 at 2:27 PM, KIM SEYEON [김세연]_FA : @Jun(정우준)_SKOH FA 피엠님 현장 확인결과 공유 부탁드립니다. May 30, 2025 at 2:51 PM, Jun(정우준)_SKOH FA : 상황이 정리된 다음에 현장에 갔고 사진이랑 얘기하는 부분 봤을때 EQ포트에 매거진이 4개가 있었고 그상태에서 AGV가 4개 매거진을 언로딩하면서 충돌 된 것으로 보입니다. EQ포트에 매거진이 있는데 어떻게 EQ에서 LR이 생성됐는지 확인해보겠습니다. May 30, 2025 at 3:08 PM, 최대운 : 저희가 확인한 결과 화물이 있는데, LR이 발생한것도 문제지만 PIO했는데 EQ설비에서 문제 LR하라는 신호를 주었기 때문에 진행한것이기 때문에 EQ 확인이 필요합니다. May 30, 2025 at 3:14 PM, Jun(정우준)_SKOH FA : 네 EQ설비 제어 담당자와 확인 해보겠습니다. May 30, 2025 at 3:51 PM, Jun(정우준)_SKOH FA : 1. EQ설비 매거진 감지 센서 I/O테스트 2. 매거진 감지시, 자동 LR 인터락 3. 매거진 감지시, 수동 LR인터락 4. AGV 포킹 전 PIO시, 인터락 조건 다 확인했고 화물이 감지되면, LR생성도 안되고 PIO도 안됩니다. May 30, 2025 at 3:52 PM, Jun(정우준)_SKOH FA : 논외로 궁금한 사항인데 노칭 설비 포트에 화물감지 정보를 GF ACS에서 받는데 1F에서는 못받는 이유가 있나요? May 30, 2025 at 3:54 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 노칭1F 에서 LR이 나온것과 별개로 DOUBLE STORAGE 센서가 AGV 자체에 있어서 충돌 안해야 하지 않나요? May 30, 2025 at 3:56 PM, 최대운 : 공매거진이기 때문에 전체를 다 못 볼수 있습니다. 중간에 작업자가 너었으면 다 못볼수 있습니다. May 30, 2025 at 3:56 PM, 최대운 : 넣었으면 May 30, 2025 at 3:57 PM, KIM SEYEON [김세연]_FA : 센서 설치시 공매거진 기준으로 센서를 설치했을것 같아서요.. May 30, 2025 at 4:08 PM, 최대운 : 센서를 첫번째 매거진에 맞추다 보니 첫번째 이후는 못볼수도 있습니다. 첫번째 제외하고 중간에 투입하면 그럴수 있습니다. 그럼 두번째 기준으로 센서 세팅하게 되면 또 다른 매거진을 감지 못할것 같습니다. 자동일때는 가능한 중간에 매거진 수동 투입 안하는게 좋을것 같습니다. May 31, 2025 at 1:53 PM May 31, 2025 at 1:53 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF 노칭 양극 AGV 8호기 점검 결과 문제될 정도로 심각 하지는 않았습니다. 단, 확인 결과 포크 핀이 하나 없더라구요. 그래서 라인 아웃 시켰으며, 포크핀 하나 장착 부탁드립니다. 그리고 투입하고 모니터링 하면 좋을것 같습니다. May 31, 2025 at 2:18 PM, KIM SEYEON [김세연]_FA : 네 확인 감사합니다. June 2, 2025 at 9:21 AM June 2, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : @이승엽 @이연수 매니저님 금일 데일리 미팅 9시반 행정동2F 산도르입니다. June 2, 2025 at 10:38 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 GF Stacking 확인하는데 스테이션 사이 대차로 인해 AGV가 장애물 감지로 이동을 못하는데 제조담당자분들은 대차를 치울 생각도 안하고 신경도 안씁니다. 이부분으로 인해 Auto step timeover 발생했습니다. 제조에 강하게 얘기 할 필요성이 있으면 제조에서도 현장에서 에러 발생 했다고 얘기만 할게 아니라 에러 발생되지 않도록 서로 협조가 필요해 보입니다. June 2, 2025 at 10:39 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 현장가서 이야기하겠습니다. June 2, 2025 at 2:11 PM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 조립동 AGV OPEN/close 스위치 스티커 교제 완료 하였습니다. June 2, 2025 at 2:38 PM, 최대운 : @KIM SEYEON [김세연]_FA 전극코터 양극 1라인 안쪽은 안되는 이유가 ODSL 센서 브라켓이 휘어져 있었습니다. 5/28일 오후 부터 안되서 제외 시킨거 같은데, 이 부분은 전극 담당자 분이 발로 ODSL 건드렸을것 같습니다. 방금 테크니션이 브라켓을 대충 조치하였는데, 브라켓이 손상되어 센서 높이가 좌우가 틀려서 이 위치 점검 불가합니다. 브라켓 교체 또는 센서 정위치 이후 모니터링 가능할 것 같습니다. June 2, 2025 at 2:48 PM, KIM SEYEON [김세연]_FA : Photo June 2, 2025 at 2:48 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 지금 저희 테크니션이 하고 있다고 하는데 브라켓 교체하면 AGV 티칭 다시 다 잡아야 하나요? 교체후 어떤것 진행하면되는지 알려주십시오 June 2, 2025 at 2:52 PM, 최대운 : 우선 눈으로 세워 놓기만 하였습니다. 테크니션이 재설치는 했는데, AGV 이동시켜 확인 결과 ODSL 정위치가 아니여서 점검이 안되는 상황입니다. June 2, 2025 at 3:38 PM, 문진영 : @연해리 PM님 로봇 파라미터 백업 후 책상에 놔두었습니다. June 2, 2025 at 4:03 PM, 연해리 : 네 감사합니다 June 2, 2025 at 5:09 PM, 최대운 : @KIM SEYEON [김세연]_FA @지석범PM (이반차FA) 금일 전극코터 점검결과 1. 양극: 2, 4, 11, 17, 22호기 점검 완료하고 투입되어 있습니다. 3호기도 점검 완료 하였는데, 아마도 IPS 스티커 위치가 X축에 안맞는거 같습니다. (창고 4에서 문제 인데) 투입 했는데 창고애서 에러가 나면 스티커 재부착 요청드립니다. 2. 음극: 4, 9, 16, 20, 21호기 투입하였습니다. 음극은 조금 더 점검이 필요한 상황입니다. 명일 조금 더 모니터링 하겠습니다. June 3, 2025 at 8:29 AM June 3, 2025 at 8:29 AM, KIM SEYEON [김세연]_FA : Photo June 3, 2025 at 8:30 AM, KIM SEYEON [김세연]_FA : Photo June 3, 2025 at 8:31 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 어제 순환물류 디버터 딜레이타임 변경 이후 야간 발생 이슈입니다. 금일 오전에 프로그램 점검하고 조치될수 있게 부탁드립니다. @Lee Junghan(이정한)_CS 매니저님과 상의 부탁드립니다. June 3, 2025 at 8:36 AM, 박시우 : @이연수 @정연동 E0CNV52_07_003 포트에 MCS 상 화물 위치(LTA0212)와 CCS의 위치가 다르게 나와 문의 드립니다. (MCS에서는 리프터에서 내려 오지 않는 것으로 나옴) June 3, 2025 at 8:47 AM, 이연수 : WaitOut 보고가 빠진것 같은데.. 원인을 확인해 보겠습니다. June 3, 2025 at 9:21 AM, KIM SEYEON [김세연]_FA : @이승엽 @이연수 매니저님 금일 데일리 미팅 9시반 행정동2F 산도르입니다. June 3, 2025 at 9:28 AM, 최대운 : @김희용 @KIM SEYEON [김세연]_FA Stacking buffer station 관련 전달드린 메일 확인 후 결정 부탁드립니다 June 3, 2025 at 10:38 AM, 김희래 : @이승엽 @최대운 @이연수 매니저님. 양극 GF 노칭 AGV 동선 관련해서 메일 회신드렸습니다. 해당 아젠다로 금일 오후 1시반에 미팅 가능하실까요?? June 3, 2025 at 10:39 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 1F Stacking 충전기 옆 키오스크에 있는 의자를 아무곳에 두어 AGV가 장애물 감지로 에러 발생하였습니다. 작업자 이동 시 의자를 키오스크에 잘 놓아 두고 이동할 수 있게 내부 공유 부탁드립니다. June 3, 2025 at 10:39 AM, 최대운 : 네 알겠습니다. June 3, 2025 at 10:40 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 3, 2025 at 11:00 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 김상진차장님 PC 나왔으니 수령해달라고 해주십시오. June 3, 2025 at 11:00 AM, 이승엽 : 넵 June 3, 2025 at 11:02 AM, 이승엽 : 아 그리고 PM님. 지난 번 보안 PC 관련하여 이후 Action 필요사항 논의 후 정리히신 내역 엑셀 송부 부탁 드립니다. 김상진 차징 외 나머지 인원 관련 June 3, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : Photo June 3, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 명일 상기 AGV5호기 점검 부탁드립니다. June 3, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : X align 조건이 왜 ok되어서 진행이 된건지가 중요합니다. June 4, 2025 at 6:30 AM June 4, 2025 at 6:30 AM, 김희용 : @이승엽 매니저님 NC Robot 체인지오더 미팅 6/5 요청입니다 날짜를 잘봇 보냈습니다 June 4, 2025 at 9:16 AM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희용 @김희래 GF 노칭 일부 EQ설비 티칭 확인결과 옵셋 입력된 값들이 다른 좌표에 입력 되어 있는걸 확인했습니다. (보통 X 값에 옵셋 적용하는게 많은데, Y값이 들어가 있음) 지난번에도 말씀드렸듯이 혹시 에러 발생하여 옵셋값 적용 시 전노드 이동했다가 다시 이동하여 옵셋이 제대로 적용되는지 필히 확인하고 투입될 수 있게 부탁드립니다. June 4, 2025 at 12:04 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @김희래 Stacking station 배치 위치 결정 부탁드립니다. BP사에 설치 위치 전달을 통해 사전에 길이 등 절단하고자합니다. June 4, 2025 at 8:30 PM, 권기홍 : @이연수 매니저님 안녕하세요. 혹시 CIM 서버에 대해 유형별 운영자매뉴얼 있으신지요? App. Down/Up 절차, 패치절차, S/W구성도 및 아키텍처정의서, 장애대응매뉴얼, 점검항목 및 점검절차서 등의 매뉴얼이 필요할 것 같아서 문의드립니다. June 4, 2025 at 8:47 PM, 권기홍 : @이연수 그리고 CIM서버별 접속정보 전달 부탁드립니다. June 5, 2025 at 9:21 AM June 5, 2025 at 9:21 AM, 김희용 : @이승엽 @이연수 매니저님 C/O 미팅은 산도르에서 진행예정이고 Daily와 병행입니다 June 5, 2025 at 9:22 AM, KIM SEYEON [김세연]_FA : 09:30입니다. June 5, 2025 at 9:25 AM, 이승엽 : 네 June 5, 2025 at 11:46 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 GF 노칭 양극 동선 변경 일정 확인 부탁드립니다. 양극 동선 변경하고 포트별 티칭 점검 시 1-3라인 생산이 많지 않아 그 시점에 양극도 티칭 추가 점검하고자 합니다. (음극은 명일까지 하면 어느정도 완료 예정) - AGV담당자 및 CS 인원 최대한 동원하여 비가동 시점에 가능한 점검 하고자 합니다. CS 지원 부탁드립니다. June 5, 2025 at 4:14 PM, 박시우 : @이연수 매니저님 캐리어 번호 LTC1495가 E0CNVC52에 9001 위치에 있는데 새벽 4시부터 커맨드는 생긴 상태로 처리되지 않은 것 같습니다. 파악 부탁드리겠습니다 June 5, 2025 at 4:54 PM, 이연수 : 전에 공지드린 적 있는데 다시 한번 공지 드립니다. 컨베어에 목적지 넣어주는 방법 ㅡ 기존 job 삭제 후 매뉴얼 job 생성하면 됩니다. June 5, 2025 at 4:58 PM, 이연수 : 문제의 발단은 Lifter로 넘어가면서 걸린 것 같습니다. Data loss 알람이 발생했고, 작업자가 캐리어 데이터 modify 해줬습니다. 그러고나서 기존 잡 삭제를 해줘야 하는데 이걸 안해줘서 잡을 만들지를 못하고 그상태 그대로 남아있었습니다. June 6, 2025 at 8:26 AM June 6, 2025 at 8:26 AM, KIM SEYEON [김세연]_FA : @이승엽 @이연수 매니저님 금일 데일리는 09시에 진행하겠습니다 June 6, 2025 at 8:27 AM, KIM SEYEON [김세연]_FA : 행정동 2F sandor입니다. June 6, 2025 at 8:34 AM, 이승엽 : @김희용 작일.송부하신 준공 관련 미팅은.몇 시에 계획 중이신지요? June 6, 2025 at 8:43 AM, 김희용 : @이승엽 데일리끝나고 진행할 예정입니다 June 6, 2025 at 8:44 AM, 이승엽 : 네 June 6, 2025 at 8:56 AM, 이승엽 : 9시까지 가기가 좀 어렵습니다. 한 15분까지 가도록 하겠습니다. June 6, 2025 at 9:01 AM, 김희용 : 예 알겠습니다 June 6, 2025 at 10:31 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희용 @김희래 분체 양극에 있는데 창고 앞에 자재가 있어 현재 AGV운영이 어려운 상태인데, 충전기 등 대기 장소에 두고 전원 off 할까요? June 6, 2025 at 10:46 AM, KIM SEYEON [김세연]_FA : 잠시만요 June 6, 2025 at 11:01 AM, KIM SEYEON [김세연]_FA : 네 꺼주시면 감사하겠습니다 June 6, 2025 at 11:01 AM, KIM SEYEON [김세연]_FA : 양극만요 June 6, 2025 at 11:02 AM, 최대운 : 네 음극은 그대로며, 양극만 전원 OFF 했습니다. June 6, 2025 at 11:08 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 전극코터 음극 4라인쪽 충전기 2번 확인하고자 했는데, 현재 드럼통이 있으며 충전기도 disable 되어 있어 확인이 어려운 상태입니다. 참고 바랍니다 June 6, 2025 at 11:13 AM, KIM SEYEON [김세연]_FA : 처리하고 말씀드릴게요 June 6, 2025 at 1:26 PM, 김희용 : @이승엽 매니저님 Cell Buffer 창고 H/S Guide 도면 부탁드립니다 June 6, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA : Photo June 6, 2025 at 1:50 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 충전기 테스트 진행하시면 됩니다. June 6, 2025 at 1:52 PM, 최대운 : 네 담당자 현재 다른 작업 중이라 그이후 진행 후 공유 드리겠습니다. June 6, 2025 at 2:19 PM, 이석규 매니저 : 메일로 송부드렸습니다. June 6, 2025 at 4:18 PM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 전극코터 양극 3호기 지니기디가 확인해보니 누군가 안테나를 부셔버리고 대충 장착만하고 도망간거 같습니다. 통신이 안되어 우선 라인 아웃 시켰으니 추후 안테나 교체 후 투입 부탁드립니다. June 6, 2025 at 4:26 PM, Kim Dongju(김동주)_FA : 네..알겠습니다. June 7, 2025 at 8:43 AM June 7, 2025 at 8:43 AM, KIM SEYEON [김세연]_FA : 2 photos June 7, 2025 at 8:44 AM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 GF NC CA AGV7번 어제 소손되어 라인아웃 되었습니다. 금일 확인하여 원인파익 및 조치 부탁드립니다. NC은 물동량 문제로 빨리 재투입돼야 합니다. June 7, 2025 at 10:34 AM, 박시우 : @이연수 매니저님 NC AGV 관련 변경 문의드립니다. 아래 내용 가능 한지 가능하다면 바로 적용 가능할까요? 1. LR 전용호기 2대로 변경(1대씩 구역 나눠 1,2,3 로봇 골고루 담당) 2. Change threath hold 10초로 변경 3. 노드 대기시간 5분->2분으로 변경 June 7, 2025 at 10:43 AM, 강기훈 : 해당 호기 점검결과 전원부 피닉스커넥터 체결이 미흡하여 전원인가가 제대로 안되었던 것 같습니다 해당 커넥터 고정 불량으로 1층 노칭 음극 비가동 에이지비에서 수급하여 오전 중으로 조치 및 라인투입 하겠습니다 금주까지 조립라인 전체호기 점검하였으나 많은 호기를 긴급으로 조치 및 점검하다보니 해당 호기 점검이 미흡했던 것 같습니다 June 7, 2025 at 11:00 AM, 박시우 : @이연수 매니저님 NC AGV 관련 변경사항 재 정리해서 송부드립니다. 1. LR 전용호기 2대로 변경 (1개 호기 - 로봇1,2호기 1개 호기 - 로복 2,3호기) 2. Change threashold 줄이기 (60초 ->10초로 변경) 3. PreAssign incentive (0초->20초 변경) 4. 데드락 방지 노드 대기시간 (5분->2분으로 변경) June 7, 2025 at 11:01 AM, 박시우 : @이연수 매니저님 음극 GF NC AGV 입니다 June 7, 2025 at 11:02 AM, 김희래 : @이연수 적용 시기는 내부적으로 확인 후 말씀드릴게요 June 7, 2025 at 11:08 AM, 이연수 : 네 결정되면 말씀해주세요. June 7, 2025 at 12:18 PM, 강기훈 : GF NC 양극 AGV#7 점검 및 조치 완료 후 라인투입하였습니다 June 7, 2025 at 12:20 PM, 김희래 : 박시우피엠님이 변경점 방에 요청드렸습니다 June 7, 2025 at 3:47 PM, 연해리 : @이승엽 @강기훈 @최대운 @이연수 매니저님 CIM 구축 계정 삭제 처리중이므로 금일부터는 아래 계정 사용 부탁드립니다. ID : skax PW : skax!@# June 9, 2025 at 8:47 AM June 9, 2025 at 8:47 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 Daily meeting 은 취소하겠습니다. 따로 요청사항은 메일로 드리겠습니다. June 9, 2025 at 8:48 AM, 이승엽 : 네 알겠습니다 June 9, 2025 at 10:24 AM, 이승엽 : @김희용 @송광진PM FA장비unit 금일 오전 10시반 준공관련 미팅은 어디로 가면 될까요? Sandro로 가면 될지요? June 9, 2025 at 10:57 AM, 조수형팀장 SKO/FA운영팀 : 김세연 피엠님이 요렇게 다른방에 남겼습니다. @심진영 피엠님 금일 준공서류 미팅 금주 수요일 (6/11)로 변경 가능할까요? 주말간 이슈로 준비가 안됐습니다. June 9, 2025 at 10:59 AM, 최태영 : This message was deleted. June 9, 2025 at 10:59 AM, 최태영 : 매니저님 안녕하세요 말씀하신 미팅이 '준공서류 개선' 미팅이면, 담당자와 통화 후 10일로 재공지했습니다 June 9, 2025 at 11:03 AM, 이승엽 : 아닙니다. 다른 미팅입니다. June 9, 2025 at 11:59 AM, 김희래 : @강기훈 매니저님. 오후에 VD AGV 동선 양방향 적용 가능한 노드 한 번 현장에서 보려고하는데 시간 괜찮으신가요?? June 9, 2025 at 12:06 PM, 강기훈 : 네 오후 2시 이후로 시간 알려주시면 현장에서 같이 점검하시죠 June 9, 2025 at 12:11 PM, 김희래 : 넵 그럼 2시반에 현장에서 뵙겠습니다! June 9, 2025 at 2:23 PM, 박시우 : 매니저님 희래pm님 대신 제가 갈려고 합니다. 한 10분 정도만 기다려 주십시오! June 9, 2025 at 2:28 PM, 강기훈 : 네네 GF 음극에 있습니다 혹시 1F는 아니죠? June 9, 2025 at 2:28 PM, 박시우 : 지금 행정동에서 출발합니다 GF음극으로 갈게요! June 9, 2025 at 2:51 PM, 박시우 : @강기훈 매니저님 GF VD 양극, 음극 양방향 이동 구간 노드번호 입니다 음극 367, 42 양극 5, 241 June 9, 2025 at 2:54 PM, 강기훈 : 네, 특이사항은 없어보이나 검토 후 바로 회신 드리겠습니다!! June 9, 2025 at 4:22 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 분체 양극 에이지비 2호기 1라인 이적재 시 정위치 미흡 관련 점검 완료하였습니다 1라인 전체포트 정위치를 기존 대비 10mm 조정하여 이적재 테스트 시 파렛트 안착 및 재아감지 센싱 이상없음 확인했습니다 June 9, 2025 at 5:10 PM, 박시우 : @강기훈 @이연수 매니저님 GF VD음극 후진 검토 건 적용한다면 언제쯤 가능할까요? 적용 시 비가동 안해도 될것 같은데 혹시 필요하다면 최소화 해서 말씀 부탁드립니다 June 9, 2025 at 5:14 PM, 강기훈 : 시간만 정해주시면 명일 오전도 가능합니다 단, 적용 시 ACS ON/OFF 필요합니다 June 9, 2025 at 5:24 PM, 박시우 : 내일 오전 재공 쌓이는 것 보고 할지 안할지 결정하려고 합니다. 시간은 다시 알려 드리겠습니다 June 9, 2025 at 5:32 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 10, 2025 at 9:25 AM June 10, 2025 at 9:25 AM, 이승엽 : @KIM SEYEON [김세연]_FA 금일 데일리 진행하시는지요? June 10, 2025 at 9:26 AM, KIM SEYEON [김세연]_FA : 네 금일은 11시에 진행 가능할까요? June 10, 2025 at 9:27 AM, 이승엽 : 네 알겠습니다 June 10, 2025 at 9:36 AM, 강기훈 : @KIM SEYEON [김세연]_FA @김희래 GF NC 양극 맵변경 관련 바쁘시겠지만 진행일정 다시 한번 확인 부탁드립니다 이후 인원 리소스가 제한적이라 금주중에 진행하는 것으로 검토 부탁드립니다 *GF VD 양음극 양방향 적용 관련도 작업 가능일정 같이 검토 부탁드립니다 June 10, 2025 at 11:02 AM, 이승엽 : PM님. Sandor에 와 있는데 아무도 안 계시네요. June 10, 2025 at 11:06 AM, 이승엽 : 김희래 PM님 오셔서 CTO님.미팅 들어가셨다고 전달 받있습니다. 이후에 알려주시면 참석하겠습니다. June 10, 2025 at 2:08 PM, 김희래 : @이연수 매니저님. ACS화면상 음극 노칭 AGV#6호기 4라인에 멈춰있는데 확인 한 번 부탁드립니다. 장애물 감지 표시도 없고 에러도 없습니다 June 11, 2025 at 8:36 AM June 11, 2025 at 8:36 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 준공 이행 점검 회의는 행정동2F sandor 회의실서 9시반에 합니다. 강승태 팀장님도 참석 부탁드립니다. June 11, 2025 at 8:49 AM, 최태영 : 웨벡스 공유드렸습니다 피엠님 June 11, 2025 at 9:31 AM, 최태영 : 2510 045 8150 비번1111입니다 June 11, 2025 at 9:39 AM, KIM SEYEON [김세연]_FA : 지금 행정동2F는 조수형 팀장. 권기홍 PM. 김동주 PM. 연해리 PM. 김세연PM 강승태 팀장. 이승엽 매니저 있습니다. June 11, 2025 at 9:41 AM, 최태영 : 마이크가 안되서 나갔다가 오겟습니다 June 11, 2025 at 1:49 PM, 김희래 : @강기훈 매니저님. GF 노칭 AGV PIO 시간 얼마로 설정되어있는지 확인 부탁드립니다(로봇 앞에서 몇 초 정도 PIO시도하고 실패하면 빠지는지) June 11, 2025 at 5:30 PM, 강기훈 : 현장에서 확인이 안되어 답변이 늦었습니다. 로봇포트와 PIO 진행(AGV Align 진행 후)시 FORK LD/ULD Fail Error 발생 관련 현재설정은 Timeout Deley 10초 입니다 June 12, 2025 at 8:24 AM June 12, 2025 at 8:24 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리미팅은 9시반에 행정동2F 산도르에서 하겠습니다. 강기훈 매니저님도 오셨음 합니다. June 12, 2025 at 2:27 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희래 @박시우 금일 데일리 시 요청주신 1F 분체 개선 점검 관련 조치내용 공유 드립니다 1. 음극 분체 2라인 E1PLA041_P01, 02 AGV#2 ULD시 PLT GUIDE 간섭 - 전체호기 티칭점검 후 정위치 수정 및 테스트 진행 완료 2. 양극 에어샤워 스텝 타임아웃 - 에어샤워 창고방향 도어 오토/메뉴얼 스탭에서 개방안됨 - 에이지비 - 에어샤워 PIO 확인 시 도어 개방이 안되어 에어샤워에서 오픈 ENABLE/COMPT 신호 수신안되어 에러발생 확인 - 현재 도어 점검 중이며, 점검 후 오토모드로 사용가능 June 12, 2025 at 2:28 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 12, 2025 at 4:52 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @지석범PM (이반차FA) @김희래 @박시우 김세연 피엠님, GF VD AGV 인플레이스 센서 전원 off 관련 plc 로직도 수정필요하여 일단 작업 홀딩 후 다시 원복했습니다 내부적으로 이적재 시 인플레이스 안보는 로직 또는 뮤트기능 추가 후 전원 off 및 제거작업 해야할 것 같습니다 먼저 plc 준비작업 일정 확인 후 다시 작업계획 수립하겠습니다 June 12, 2025 at 4:55 PM, 강기훈 : @권기홍 그룹장님, 금일 데일리 시 논의된 GF NC AGV 로봇포트 대기 후 반송수행 관련 ACS에서 DEST INTERLOCK DELAY 설정기능은 현재 없는 것으로 확인되었습니다 그리고 현재 운영 시나리오 상 PIO T1 STEPA TIMEOUT DELAY 변경은 효과가 없을 것 같습니다 도움 드리지 못한 점 죄송합니다 June 12, 2025 at 5:21 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 12, 2025 at 5:27 PM, 권기홍 : 효과가 없다고 생각하시는 이유를 설명부탁드립니다. June 12, 2025 at 5:41 PM, 강기훈 : 이미 해당 목적지에서 로봇이 이적재 작업 중이면 에이지비는 데스트 인터락으로 피아이오 전에 다른 포트로 목적지 변경하여 이동합니다 June 12, 2025 at 5:48 PM, 박태영 : 데스트 인터락을 PIO 전에 확인할 수가 있나요 June 12, 2025 at 5:56 PM, 강기훈 : 네 확인 가능합니다 June 12, 2025 at 6:42 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 메일을 못드렸는데, 6.16(월) 08:00~13:00까지 비가동 예정이니, 노칭GF 양극 다관절포트 상하행선 변경 작업 준비 부탁드립니다. June 12, 2025 at 6:49 PM, 강기훈 : 네, 알겠습니다 해당 시간 맞추어 진행준비 하겠습니다 June 12, 2025 at 6:52 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 12, 2025 at 6:57 PM, 권기홍 : MC5167 VC07 1시간반동안 반송중입니다. LD/UD Timeout, Auto Step Timeout... 계속 반복해서 발생중입니다. June 13, 2025 at 8:32 AM June 13, 2025 at 8:32 AM, 박시우 : @이연수 금일 데일리미팅 때 노칭 AGV 그룹핑 관련해서 여쭤보고자 하는데 참석 가능하실까요? June 13, 2025 at 9:08 AM, 박시우 : @KIM SEYEON [김세연]_FA Pm님 오늘 데일리는 9시반에 산도르에서 하면 될까요? June 13, 2025 at 9:24 AM, KIM SEYEON [김세연]_FA : 네 June 13, 2025 at 1:28 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 메일로 '노칭GF AGV 발생 알람' 정리해서 송부드렸습니다. 확인해주시고 노칭GF AGV 알람감소 부탁드립니다. June 13, 2025 at 1:59 PM, 강기훈 : 네, 알겠습니다 June 13, 2025 at 2:36 PM, 김희래 : @이승엽 매니저님. 회수물류 C/V가 2단으로 되어있는데 어떤 케이스에 2단으로 올리는지 제어 확인 한 번 부탁드립니다. June 13, 2025 at 2:48 PM, 박태영 : PIO 전에 데스트 인터락을 확인할 수 있는 방법이 어떤것이 있을까요? June 13, 2025 at 2:50 PM, 강기훈 : PLC와 ACS가 공장망 통해 통신 가능 합니다 June 13, 2025 at 2:50 PM, 이승엽 : 1단 공 Plate 회수로 되어 있고, 2단은 Rework 등 실 Plate 이송으로 알고 있습니다. June 13, 2025 at 2:56 PM, 김희래 : 넵 매니저님 확인했습니다. 혹시 full plate 전창고 이동시 회수에 있는 turn unit에서 turn도 하나요? June 13, 2025 at 2:57 PM, 강기훈 : @박태영 답장으로 안달려서 다시 공유 드립니다 June 13, 2025 at 2:58 PM, 강기훈 : 추가적으로 CIM화면 우측 상단 보시면 PLC CONNECT 연결상탸도 확인 가능합니다 June 13, 2025 at 3:09 PM, 이승엽 : 무지부 방향 때문에 그러시죠? 턴 합니다. June 13, 2025 at 3:09 PM, 김희래 : 네 맞습니다 확인 감사드립니다! June 13, 2025 at 3:19 PM, 이승엽 : @연해리 @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA PM님. 1. 시너스텍에서 차주 월요일 (06/16) 디버터 벨트 1차분 (조립 영역) 반입 예정입니다. 2. 해당건 반입 신청 드렸사오니, 원활한 반입 진행을 위해 금일 중 바로 승인 부탁 드립니다. 3. 월요일 반입 시, 해당 부품의 양이 어느 정도 되기 때문에 반입 후 바로 인수 인계가 가능하도록 법인 쪽 수령하실 인원 확보 요청 드립니다. June 13, 2025 at 3:19 PM, 이승엽 : 당초 계획보다 일정을 더 당겨서 입고 예정이오니, 참고 부탁 드립니다. June 13, 2025 at 3:22 PM, 이승엽 : 빈입 예정 수량은 사과 박스 장도 한 12박스 됩니다. 적정 인력 배정하시어 인수 인계 이루어질 수 있도록 인력 확보 부탁 드립니다. June 13, 2025 at 3:23 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 감사드립니다. June 13, 2025 at 3:23 PM, 이승엽 : 빈입 예상 시간은 오후 1시 정도이나, 트럭 일정이 들쑥날쑥 한 점 감안해서 변동이 있을 수 있습니다. June 13, 2025 at 3:23 PM, KIM SEYEON [김세연]_FA : 네 감안하겠습니다. June 13, 2025 at 3:41 PM, KIM SEYEON [김세연]_FA : @이연수 매니저님 김상진차장님과 16시에 행정동 산도르에서 뵐게요 June 13, 2025 at 3:44 PM, 이연수 : 벌써 와서 미팅 중입니다. June 13, 2025 at 3:44 PM, KIM SEYEON [김세연]_FA : 아 죄송합니다 빨리가겠습니다. June 13, 2025 at 3:44 PM, 이연수 : Adam 방입니다 June 13, 2025 at 3:45 PM, KIM SEYEON [김세연]_FA : Photo June 13, 2025 at 3:45 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 긴급으로 AGV 점검 요청드립니다. June 13, 2025 at 4:01 PM, Kim Dongju(김동주)_FA : 반입 장소는 화성모듈 뒤쪽 화물 엘레베이트 앞으로 하겠습니다. 반입시 저에게 연락 부탁드립니다. June 13, 2025 at 4:13 PM, 강기훈 : 해당 호기(GF VD CA AGV#1)는 라인아웃 후 명일 오전 우선으로 점검 진행하겠습니다 June 13, 2025 at 5:03 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희래 @박시우 @최태영 금일 개선 요청사항 점검 및 작업내용 공유 드립니다 1. GF NC 음극 EQ4-1 AGV Inport(P03, 04) AGV PIO T3 TIMEOVER 관련 - P03 Port PIO T3(Compt) 관련 배선 체결이 다른 IO에 물려 있어 발생 확인하였고 배선 체결 후 리모트카드 IO 및 AGV PIO 통신 점검 완료 2. GF NC 음극 POS CONT POS 관련 - 발생구간 PIVOT NODE AGV 파라미터 수정 - 모니터링 필요 June 14, 2025 at 11:09 AM June 14, 2025 at 11:09 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @지석범PM (이반차FA) @이주봉PM LEE JUBONG(FA) 피엠님, VD GF 음극 3호기 1단 포크에서 EQ -> 후창고 포트 입고 중 인플레이스센서와 충돌 발생하여 브라켓 휨 발생했습니다 해당 음극 3호기 포크 1단 센서 제거 후 스태킹 6번 창고에 계신분께 전달하겠습니다 *음극 2호기 포크 1단도 충돌 발생 우려가 높아 역시 제거 후 전달하겠습니다 (2, 3호기 인플레이스 센서 각 1개 총 2개) June 14, 2025 at 11:14 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. @Baek Hojong(백호종)FA 센서 인수하여 선반에 보관 부탁드립니다. June 14, 2025 at 11:15 AM, Baek Hojong(백호종)FA : 저에게 주시면 됩니다 매니져님 June 14, 2025 at 1:35 PM, Baek Hojong(백호종)FA : @강기훈 매니져님 1F노칭 양극 AGV 운영대수가 현시점 #16호기 방금 라인아웃으로 4대 운영중입니다 추가로 3대 라인IN 부탁드립니다 June 14, 2025 at 1:36 PM, 강기훈 : 테크니션에서 진행 부탁드려요 될까요 에러 점검 중이라 인원이 없습니다 June 14, 2025 at 1:39 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 저희 테크니션은 아무거나 살릴것 같은데, 혹시 괜찮은 호기가 있을까요? 없으면 테크니션에게 해보라고 하겠습니다. June 14, 2025 at 1:47 PM, 강기훈 : 전체호기 점검 및 투입되었던 호기라 상관 없습니다 투입 전 포크핀 유무 확인 후 투입 부탁드립니다 June 14, 2025 at 1:47 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 에러점검에 집중해주십시오. June 14, 2025 at 1:47 PM, 강기훈 : 저도 현장에서 투입하는 거 같이 확인하겠습니다 June 14, 2025 at 1:49 PM, Baek Hojong(백호종)FA : 테크니션 친구들하고 같이 하겠습니다 June 14, 2025 at 2:57 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @Baek Hojong(백호종)FA @Jun(정우준)_SKOH FA 금일 VD GF 양극 1호기 OVERCURRENT Error 점검 및 개선작업 진행 후 라인투입 하였습니다 점검내용 1. Align축 파워 및 엔코더케이블 고정상태 확인(6/10) 2. Align축 피닉스 커넥터 고정싱태 확인(6/11) 3. Align축 Servo 오토튜닝 완료(6/12) 4. Align축 Servo 게인값 수정(6/13) 5. 추가 모니터링 필요(6/13~) June 14, 2025 at 3:38 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @Baek Hojong(백호종)FA @Jun(정우준)_SKOH FA 금일 GF NC 음극 DESTINATION ERROR 160, 167, 18, 342번 노드 발생 관련 AGV Map 수정 및 전체호기 횡전개 완료하였습니다 추가적으로 모니터링 진행하겠습니다 June 14, 2025 at 4:11 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 14, 2025 at 6:05 PM, 동휘 Donny : TQMS ALERT: SKOH ACS 904700 2025-06-14 18:01 Yellow DISK_OVER [Server] Disk overuse (SKOH2-MCSPACS5) - e: is 86% (Thresholds 86%) ACS 디스크 알람 떴습니다 누가 봐줄수 있나요? June 14, 2025 at 6:20 PM, KIM SEYEON [김세연]_FA : @이연수 매니저님 김상진차장님에게 확인부탁드립니다. June 14, 2025 at 6:24 PM, 강기훈 : 김상진 차장이 원격으로 지금 확인 중 입니다 June 14, 2025 at 6:24 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 14, 2025 at 6:25 PM, 강기훈 : 일부 삭제해서 용량 확보하면 될 것 같다고 합니다 June 14, 2025 at 6:27 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 간단한 문제는 아닌것 같습니다. 월요일 데일리 시 논의해보시죠. 지금 12개라인중 8개라인 가동중인데 Max값에 다다랐다고 하면 추가 버퍼확보가 필요할것 같습니다. June 14, 2025 at 6:36 PM, 박태영 : 또는 지금 삭제 스케줄이 걸려있는지 확인이 필요합니다 June 14, 2025 at 6:37 PM, 강기훈 : 로그보관은 30일이며 순차적 삭제로 알고 있습니다 June 14, 2025 at 6:51 PM, 권기홍 : 로그 저장시 혹시 압축해서 저장하나요? June 14, 2025 at 7:12 PM, 강기훈 : 그건 월요일에 확인해 보겠습니다 June 14, 2025 at 7:12 PM, 강기훈 : 현재 용량은 일단 80%까지 낮춰놨고 더 줄이는 작업 진행 중 입니다 June 14, 2025 at 7:15 PM, 강기훈 : 그룹장님, 압축해서 저장 중이라 합니다 June 14, 2025 at 7:18 PM, 강기훈 : 75%까지 정리 후 마무리 하겠습니다 June 15, 2025 at 7:35 PM June 15, 2025 at 7:35 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 생산에 또 변경사항이 있습니다. 우선 명일 AGV 작업은 준비해주시되 인력 출근은 정상출근하도록 해주세요. 08시부터 하진 못할것 같습니다. 명일 09시반에 의사결정된사항 공유드리겠습니다. June 15, 2025 at 7:36 PM, 강기훈 : 네, 알겠습니다!! June 15, 2025 at 7:37 PM, KIM SEYEON [김세연]_FA : 감사합니다 June 16, 2025 at 9:30 AM June 16, 2025 at 9:30 AM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 지금 노칭라인 세웠고 작업 바로 부탁드립니다. June 16, 2025 at 9:30 AM, KIM SEYEON [김세연]_FA : @이승엽 매니저님 금일 데일리 스킵하겠습니다. June 16, 2025 at 9:50 AM, 이승엽 : 네 알겠습니다 June 16, 2025 at 10:05 AM, 강기훈 : @KIM SEYEON [김세연]_FA @김희래 @박시우 금일 GF NC 양극 동선변경 관련 9시 30분부터 작업 진행 가능하다 전달 받았으나 아직도 생산 중이며, 설비 대부분 오토모드 입니다 다시 한번 확인 부탁드립니다 June 16, 2025 at 10:05 AM, 강기훈 : 작업진행을 아직 못하고 있습니다 June 16, 2025 at 10:19 AM, 강기훈 : 김세연 피엠님과 확인하였으며, 지금부터 작업 진행하겠습니다 June 16, 2025 at 10:44 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 음극 릴창고 OP방향 안전휀스 위치가 임의로 변경되어 랙 후면으로 사람이 들어갈 수 있는 공간이 생겨 운영간 매우 위험해 보입니다 확인 부탁드립니다 *안전휀스 위치 임의변경 구간에 릴창고 OP구간으로 현장에서 바로 출입할 수 있게 신규 도어가 추가된 것 같으며 그 영향으로 휀스도 임의로 조정된 것 같습니다 June 16, 2025 at 11:05 AM, 김희래 : @강기훈 매니저님. 양극 노칭 동선 작업시 2라인쪽 포트들도 AGV와 한 번씩 점검해주시기 바랍니다. 2라인으로 LR시 이적재시간이 타 라인 대비해서 긴데, 이적재 중 알람 발생 빈도가 더 높은 것 같습니다(To alarm count) June 16, 2025 at 11:07 AM, 강기훈 : 네, 금일 비가동 시간에 1, 2, 3라인 전호기 아웃포트구간 티칭점검 동시 진행하고 있습니다 하지만 시간이 한정적이라 전호기 점검은 어렵습니다 June 16, 2025 at 2:27 PM, 최태영 invited 정락. June 16, 2025 at 3:28 PM, 이승엽 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 반입한 CV 벨트 8번 반입구에 있습니다. June 16, 2025 at 3:28 PM, 이승엽 : This message was deleted. June 16, 2025 at 3:29 PM, 이승엽 : 조립동 좌측 끝에 반입구 입니다. 행정동 마주보고 있는 June 16, 2025 at 3:42 PM, 이승엽 : @Kim Dongju(김동주)_FA PM님이 말씀하신 아래 장소와 동일한 장소 같습니다. 반입 장소는 화성모듈 뒤쪽 화물 엘레베이트 앞으로 하겠습니다. 반입시 저에게 연락 부탁드립니다. June 16, 2025 at 3:44 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 16시에 노칭 재가동합니다. 15시55분까지 작업 완료후 레디 부탁드립니다. June 16, 2025 at 6:21 PM, 김희래 : @이승엽 매니저님. 로봇 제어 확인 필요사항입니다. GF 양극에서 확인했습니다. 확인 부탁드립니다. 1. 실매거진 이재 후 패스박스로 플레이트 진입해야 반대편 작업 진행 2. 공매거진 이재 후 바로 실매거진 작업하지 않고 홈 위치에서 약 5~7초 대기 후 이재 시작(양극 로봇3호기에서 확인) 위 2개 케이스 모두 공공 플레이트 대기하고 있어서 이재 조건은 됩니다. June 16, 2025 at 6:32 PM, 이승엽 : 1. 에서 반대편 작업 진행이라고 하는 부분은 어디를 말씀하시는 건지요? 옆 Passbox에서 공플레이트가 안 나온다는 말씀이신지요? 2. 번은 어떤 사유로 대기하는 것인지 확인해보도록 하겠습니다. ** Capa-Up을 위한 추가 개선 요청 사항인건가요? June 16, 2025 at 6:33 PM, 권기홍 : NC GF AN VC03 왜 안움직이고 있는걸까요? June 16, 2025 at 6:34 PM, 김희래 : 1번은 P11,12쪽이랑 P13,14쪽이 있으면 P13,14쪽에서 실매거진 이재 완료하고 나서 P11,12쪽 실매거진 이재할 수 있는 상황인데 로봇이 홈 위치에서 대기하다가 패스박스로 들어가니까 P11,12쪽 이재를 시작했습니다. 추가 개선이라기 보단 대기하는 사유 먼저 확인 부탁드립니다(현재 설정) June 16, 2025 at 6:35 PM, 이승엽 : 그렇다면 둘 다 로봇이 대기하는 것이 문제네요? June 16, 2025 at 6:36 PM, 이승엽 : 바로 할 수도 잇을 것 같은데, 그로 인해 동작 간 대기로 인하여 지체가 발생한다로 이해하겠습니다. June 16, 2025 at 6:36 PM, 김희래 : 네네 맞습니다. 바로 이재할 수 있는 환경인데 대기하고 있어서요. June 16, 2025 at 6:38 PM, 권기홍 : @강기훈 매니저님 GF NC AN VC03 호기 확인 부탁드립니다. 10분넘게 안움직이고 있어요 June 16, 2025 at 6:40 PM, 이승엽 : 네 확인 후 회신 드릴 수 있도록 하겠습니다. June 16, 2025 at 6:42 PM, 김희래 : 헝가리 테크니션이 조치 중입니다 June 16, 2025 at 6:42 PM, 권기홍 : 무슨 문제였나요? 아무 에러도 안떴던데 June 16, 2025 at 6:43 PM, 강기훈 : 감사합니다 추가적으로 플레이백 확인해보겠습니다 June 16, 2025 at 7:05 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @방혁 PM(Bang.Hyuk) FA VD GF 양극 AGV#1 금일 얼라인축 오버커런트 관련 점검 후 라인투입하였으나 현재 재발하고 있어 라인아웃 필요할 것 같습니다 명일 오전 우선순위로 재점검 진행하겠습니다 June 16, 2025 at 7:07 PM, 김희래 : 원인은 못 봤습니다..도착하니까 그 때 막 조치 완료했었습니다 June 16, 2025 at 7:14 PM, 강기훈 : 확인 후 공유 드리겠습니다 June 16, 2025 at 7:23 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. June 17, 2025 at 2:35 AM June 17, 2025 at 2:35 AM, 권기홍 : @강기훈 @최대운 @이승엽 매니저님 밤늦게. 죄송합니다. 노칭관련 물동량 문제로 방실장님께서 아침 7시까지 출근 및 회의참석요청하셨습니다. June 17, 2025 at 2:36 AM, 권기홍 : 경로추가 변경, 블로킹 범위 수정등 작업 방법 관련 내용이 다뤄질 것 같습니다 June 17, 2025 at 7:11 AM, 최태영 : 해당 미팅 링크 톡방에도 보내드립니다 2514 471 9518 비번11ㅂㅂ June 17, 2025 at 7:11 AM, 최태영 : 비번1111 June 17, 2025 at 7:18 AM, 최태영 : 미팅 진행하겟습니다 June 17, 2025 at 9:32 AM, 김희래 : @강기훈 금일 GF 양극 노칭 적용 아이템입니다. 1. 대체목적지 로직 변경(MCS 변경 완료) 2. #5,6라인 중앙 동선 변경(라인 in 방향으로) 3. 52번 - 51번 노드 미사용 전환 4. 로봇#3호기 진입 동선 변경 가능한지 현장 확인(대차, 인동선 여부, 도어 방향) 5. 로봇 진입하는 동선에 찍힌 노드 나오는 방향으로 변경 적용되시면 말씀 부탁드립니다! June 17, 2025 at 9:44 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @이주봉PM LEE JUBONG(FA) @김희래 @박시우 @권기홍 피엠님, 2, 3, 5번 오후 비가동 시작 시 적용하겠습니다 자체적으로 로봇 1호기 에이지비 2대 진입 위해 동선도 수정해보려 합니다 *현재 확인해 보니 로봇 2호기는 레이아웃 상 에이지비 2대 도킹이 안됩니다 *로봇 1호기 역시 2대 도킹 시 권기용 그룹장님이 확인하신대로 푸시 후 빠져나갑니다 해당 현상 개선 위해 동선개선 포함하여 준비하겠습니다(오전 테스트 예정) June 17, 2025 at 10:17 AM, 권기홍 : 3호기쪽 말씀드린건데... 3시경 3호기 부근도 확인부탁드립니다 June 17, 2025 at 10:25 AM, 강기훈 : 해당 부분은 에이지비 장애물감지로 블록된 에이지비가 이동을 못한 것 같아 에이지비에서 점검할 예정입니다 June 18, 2025 at 10:50 AM June 18, 2025 at 10:50 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) @김희래 @박시우 전일 전극 코터구간 AP 점검 중 특이사항이 있어 공유 드리오니 확인 부탁드립니다 1. 전극 코터 양음극 AP채널 분배를 이전 5월 에 새로 진행하였으나 현재 채널변경되어 있음 - AP 채널 변경 시 공유 필요 - 2번 항목 정리되면 채널분배 재작업 예정 2. GF 전극동 양음극(코프슬)에서 기존 5G 사용으로 협의된 SKOH2_GUEST 간섭확인 - Guest AP 채널 2.4G에 서칭되며 우선적으로 정리필요 June 18, 2025 at 10:50 AM, 강기훈 : 5 photos June 18, 2025 at 11:11 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @김희래 @박시우 1F ST 양극 Biffer Station 설치 구간에 현재 9라인 앞 작업자 책상과 간섭이 됩니다 책상 2개 이동 부탁드립니다 현장에 스테이션 위치 마킹(녹색 마킹테잎)되어 있어 간섭구간 바로 확인 가능합니다 June 18, 2025 at 11:12 AM, Kim Dongju(김동주)_FA : 같이 가시죠. June 18, 2025 at 11:12 AM, 강기훈 : 지금 가시죠! June 18, 2025 at 12:26 PM, Kim Dongju(김동주)_FA : @강기훈 매니저님 금일 오후에 고객 방문 없습니다. 금일 하시려던 작업 하시면 됩니다. June 18, 2025 at 12:31 PM, 강기훈 : 네, 확인 감사합니다 June 18, 2025 at 1:03 PM, 김희래 : @강기훈 매니저님. 스케줄상 양극 로봇#3호기 동선 테스트도 오후에 가능하신가요? June 18, 2025 at 1:32 PM, 강기훈 : 네, 알겠습니다 June 18, 2025 at 1:43 PM, 강기훈 : 오후 2시부터 30분 가량 노칭 양극 동선 개선 전 에이지비 테스트 예정입니다 June 18, 2025 at 2:26 PM, 김희래 : @강기훈 매니저님. 일주일간 양극 노칭 150번 노드(로봇2호기 앞) AGV7호기,9호기 ODSL abnormal 발생 빈도가 많습니다. 점검 부탁드립니다. 추가로, 포트 티칭점검 포함해서 비가동 필요한 작업들 6월 중에 최대한 해볼 수 있게 리스트 메일로 송부 부탁드립니다. June 18, 2025 at 2:45 PM, 강기훈 : 7, 9호기 해당 노드 정위치 점검 후X값 옵셋적용하겠습니다 June 18, 2025 at 2:45 PM, 강기훈 : 양극 노칭 추가적으로 중앙동선 연장구간 에이지비 교차주행 테스트 해보려 합니다 3시부터 15분 정도 에이지비 2대로 진행하겠습니다 June 18, 2025 at 3:17 PM, 김희래 : 넵 완료되시면 공유 부탁드립니다 June 18, 2025 at 4:25 PM, 양원석 : @이연수 매니저님 acs unk반송 설정 변경해야 가능한건지, 디폴트로 가능하게끔 수정된건지 문의드립니다 June 18, 2025 at 4:37 PM, 이연수 : Settings - Preference - Allow create order for unknown carrier(ON) 현장 키오스크 전체 셋팅 해놓았습니다. June 18, 2025 at 5:18 PM, 김희래 : @강기훈 매니저님. 금일 AGV 동선 점검은 모두 끝났나요?? June 18, 2025 at 5:20 PM, 강기훈 : 중앙동선 연장구간 양방향 교차주행이 안되어 추가 점검 및 테스트 필요합니다 명일 오전에 진행예정입니다 June 19, 2025 at 8:12 AM June 19, 2025 at 8:12 AM, 박태영 : 릴양극 52창고 입고반송문제 확인중이신가요? June 19, 2025 at 9:04 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 금일 에이지비 개선 및 점검 관련 필요사항 공유 드리오니 바쁘시더라도 확인 부탁드립니다 @연해리 분체 음극 창고CV NG PLT 입고 시 장애물영역 및 CV 에러 개선 위해 테스트자재(실파렛트) 필요합니다 사용 가능자재 확인해 주시면 점검 예정입니다 @김희래 @박시우 GF NC 양극 AGV 추가동선 개선 관련 중앙동선 연장 구간 오전 10시부터 에이지비 2대로 약 1시간정도 테스트 예정입니다 @Kim Dongju(김동주)_FA GF VD, NC 양음극 SW LIMT, ODSL 관련 에러 티칭점검 예정입니다 금일 작업 불가한 공정 있으면 공유 부탁드립니다 June 19, 2025 at 9:58 AM, 연해리 : 분체 1F음극 자동화창고 앞 유미코어 1plt 311-00172J PS311-2505230058 자재 위에 FA TEST라고 적힌 자재 사용해주시면 되고, 사용끝나신뒤에 원래 자리에 놔주신 뒤 말씀 부탁드립니다. June 19, 2025 at 11:09 AM, 강기훈 : 감사합니다!! 오후에 점검 예정이며, 완료 후 공유 드릴게요!! June 19, 2025 at 11:20 AM, 박태영 : GF 스태킹 1,2,3 라인쪽 음극 port들 반송이 잘 안되고있는거 같은데 점검 부탁드립니다 June 19, 2025 at 11:24 AM, 최태영 : 매니저님 CCS로 현상 파악한거 공유드립니다 @이연수 1. 현지시간 오전 06:40경 부터 ACS 플레이백 시 음극자재 커맨스 미생성. 2. 순환 CV P27(음) 포트 현재도 미반송 중. 실뭉확인 필요 3. P23(음극) 포트 오전 0:50~10:17까지 complete반송 없었으며, MLA0002 캐리어 반송 log상 Complete없음 4. P23 포트도 plate가 채워지지 않며 반송 문제가 있어보임. June 19, 2025 at 11:26 AM, 박태영 : 지금 스태킹 agv assing도 문제있어보입니다 June 19, 2025 at 11:26 AM, 박태영 : 지금 로딩 떠있는 port 많고 순환컨베어 port 에도 5개 나와있는데 agv가 6대 idle 3대 차징 1대 busy 상태입니다 June 19, 2025 at 11:26 AM, 박태영 : 음극 다 비어있는데 빠르게 확인바랍니다 June 19, 2025 at 11:32 AM, 박시우 : @이연수 매니저님 우선 현상 파악 하시기 전에 CCS 상 16018(C1CNV072_P23) 포트에 MLA0002가 못들어가고 있어서 그것부터 조치 필요합니다 June 19, 2025 at 11:34 AM, 박태영 : ACS assign 확실히 이상합니다 June 19, 2025 at 11:46 AM, 이연수 : 조치해서 이제 떠갈겁니다 June 19, 2025 at 11:46 AM, 최태영 : 매니저님~ 조치 방법 알려주시겠어요? CIM에서 dest 정보 바꾸면 되는식인가여 June 19, 2025 at 11:47 AM, 이연수 : 아니요. CCS 잡을 삭제한후 매뉴얼로 새로 만들어주면 됩니다. June 19, 2025 at 11:48 AM, 이연수 : P27잡이 안생기네요. 일단 만들겠습니다. June 19, 2025 at 11:49 AM, 권기홍 : MLA6235 미건조 자재인것 같습니다. 후창고로 복귀시키던 해야합니다 June 19, 2025 at 11:50 AM, 이연수 : 아 acs 잡을 바꿔야겠네요 June 19, 2025 at 11:51 AM, Mohammad Amir : Sir, Command has been created to send it to warehouse as for this we found magazine MA6045 for this VD process is still start. Now AGV#5 has assigned to take it to the warehouse. Thank you very much! June 19, 2025 at 11:55 AM, Mohammad Amir : Dear @박태영 Sir, Now it seems that port C1CNV072_P27 has normalized,carrier MLA6235 was causing the issue. Now new carrier MLA6213 arrived here and now it being automatically returned to Stacking 2-15_P02 on AGV#8. I am monitoring. Thank you very much! June 19, 2025 at 12:00 PM, 박태영 : MLA6235 6/16 17:24~26분 이력보시면 잘못올라옵니다 June 19, 2025 at 12:01 PM, 권기홍 : @이연수 MLA6235 순환컨베이어에서의6/16 11시경 이력 확인부탁드립니다 이동이력 3000건넘게 발생했습니다 June 19, 2025 at 12:03 PM, 권기홍 : 11시 55분 이네요 June 19, 2025 at 12:12 PM, 이연수 : 6235캐리어가 ccs상에 2개 있네요.... June 19, 2025 at 12:14 PM, 이연수 : 어느 시스템도 중복을 걸러내지 못했다는 얘긴데. June 19, 2025 at 12:17 PM, 박태영 : MCS/RtD 는 위치변경이 올라오면 무조건 업데이트 합니다 의심할수는 없으니까요 June 19, 2025 at 12:18 PM, 박태영 : 중복이 아닌 메세지 처리 입니다 June 19, 2025 at 12:32 PM, 이연수 : 순환에서 CCS가 Dup로 wait in 보고를 하면 mcs는 목적지를 어디로 내려주는지 확인해 주실 수 있을까요? 매뉴얼 출고포트로 내려주는지? June 19, 2025 at 12:33 PM, 박태영 : DUP 는 기본적으로 시스템에서는 명령을 내릴수가 없습니다 DUP는 디폴트로 CCS로 처리되어야 합니다 June 19, 2025 at 12:35 PM, 이연수 : CCS가 자체반송하는 시나리오는 기존에 없으니 협의가 필요합니다. June 20, 2025 at 10:27 AM June 20, 2025 at 10:27 AM, 강기훈 : @KIM SEYEON [김세연]_FA 피엠님, 어제 미팅 시 공유드린 GF VD 음극 AGV#1 Fork2 Overload 개선 관련 감속기 금일 제공해주시면 교체작업 진행하려 합니다 가능시간 알려주시면 받으러가겠습니다 Fork축 감속기 품명: PBT62-H-25 (Maker: ATG, 감속비 1/25) June 20, 2025 at 10:27 AM, 강기훈 : @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) June 20, 2025 at 11:23 AM, Kim Dongju(김동주)_FA : 매니저님 해당 스패어 재고가 없습니다. 1F AN NC 17호기와 동일사양으로 해당 호기에서 부품 탈거 후 체결 부탁드립니다. June 20, 2025 at 11:28 AM, 강기훈 : 네, 알겠습니다 작업 후 공유 드리겠습니다 탈거한 파츠는 6번 창고에 가져다 놓겠습니다 June 20, 2025 at 11:29 AM, Kim Dongju(김동주)_FA : 네..감사합니다. June 20, 2025 at 12:21 PM, Kim Dongju(김동주)_FA : @강기훈 GF VD AGV 범퍼 파손으로 스패어 확인 중인데.. 범퍼 도면과 BOM간 정합성이 맞지 않아서 사양 확인이 불가한 상황입니다. 각 공정별로 AGV 범퍼 관련하여 호환 가능한 것이 있을까요? 확인 부탁드립니다. June 20, 2025 at 6:42 PM, 강기훈 : 피엠님 VD 범퍼 문의주신 내용 교체 가능부분 간략하게 공유 드립니다 VD: GF, 1F 호환 가능 NC: GF, 1F 호환 불가 (AGV size가 다름, DD, QD) ST: GF, 1F 호환 불가 (AGV size가 다름, DD, QD) June 20, 2025 at 7:16 PM, Kim Dongju(김동주)_FA : 확인 감사합니다. 현장 실물 확인 후 긴급으로 교체 완료 하였습니다. June 21, 2025 at 10:24 AM June 21, 2025 at 10:24 AM, 강기훈 : @김희래 피엠님, 전일 미팅 시 공유주신 GF NC/VD 비가동 관련 노칭은 오전 양극 한구역/ 오후 음극 한구역으로 진행하려 합니다 차주 월요일 오전부터 노칭 작업 가능한지 확인 부탁드립니다 June 21, 2025 at 10:27 AM, 김희래 : 넵 그럼 한 팀으로 운영하시는거죠?? June 21, 2025 at 10:29 AM, 강기훈 : 네 맞습니다 June 21, 2025 at 10:32 AM, 김희래 : 네 알겠습니다. 작업 시작은 9시부터 하시죠. June 21, 2025 at 10:37 AM, 강기훈 : 9시에 바로 시작할 수 있게 제조쪽에 사전 공유 및 준비 부탁드립니다 노칭 양극부터 9시 음극은 2시부터 진행하는 것으로 하겠습니다 *8시 55분에 ACS 통해 AGV 동선변경 및 그룹핑 해제 예정 *점검작업 시 AGV 4대 메뉴얼모드 6대 오토모드 운영하며 스왑예정 June 21, 2025 at 10:41 AM, 김희래 : 넵 알겠습니다. 화요일부터 작업 일정은 월요일에 추가로 논의하시죠. June 21, 2025 at 10:41 AM, 강기훈 : 네, 알겠습니다 June 21, 2025 at 2:53 PM, 연해리 : @이연수 매니저님 음극 릴창고 52호기 Share Zone 사이에 두고 밀어내기 간 무언정지 또 발생했습니다. SCS 담당자분께 원인분석 요청 부탁드립니다. (‘25.06.21 14:37) June 23, 2025 at 9:09 AM June 23, 2025 at 9:09 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @김희래 @박시우 @권기홍 금일 GF NC 양음극 비가동 통해 일부구역 티칭점검 예정입니다 하기 내용 다시 한번 참고 부탁드립니다 1. 오전 9시 - 13시 : 노칭 양극 A구역 4시간 - AGV 4대씩 작업 - AGV 그룹핑해제 이후 원복 2. 오후 14시 - 오후 18시 : 노칭 음극 A구역 4시간 - AGV 중앙라인 동선변경(작업 후 유지) - AGV 그룹핑 해제 이후 원복 - AGV 4대씩 작업 3. GF NC 양극 맵변경작업(로봇 3호기 및 중앙라인추가)은 오후 1시에 적용 예정 June 23, 2025 at 9:29 AM, 김희래 : @이연수 매니저님. GF 음극 로봇#1호기 CCS 보시면 공공플레이트가 실매거진 담는 위치로 가지 않았었습니다. 저번에도 이 현상이 있었는데 제어쪽이랑 같이 확인해주세요.(플레이백으로 9:25부터 보시면됩니다). 로봇이 반대편 작업 완료하니까 이동했어요. June 23, 2025 at 10:12 AM, 이연수 : 이런 상황이 특수하게 발생된 상황이 아니라 원래 로봇이 작업 중일 때 반대쪽 컨베어 이동 안되게끔 되어있는 것으로 보이는데 이런 것이 tact에 큰 영향을 미친다고 보시는 걸까요? June 23, 2025 at 10:32 AM, 김희래 : 그 상황에서 실매거진이 들어왔다고 가정하면 플레이트가 미리 이동해있는거랑 반대쪽 작업해야 이동하는거랑 처리되는 시간에 차이가 납니다. 그리고 다른 호기가 다 그런것도 아니고 그 호기만 그렇게 구성되어있다면 그건 수정해야합니다. June 23, 2025 at 11:48 AM, 김희래 : 매니저님. 작업 완료되시면 다시 그룹핑해주시고 완료 공유 부탁드립니다. June 23, 2025 at 1:57 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 작업현황 공유 부탁드립니다. June 23, 2025 at 2:11 PM, 강기훈 : 1. 양극 A구역 점검 완료하였으며 AGV 그룹핑 및 맵 변경은 2시 40분 적용 예정입니다 2. 음극 A구역 작업 위해 그룹핑 해제 및 중앙동선 변경 완료했습니다 점검작업 시작하겠습니다 June 23, 2025 at 2:15 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희래 @박시우 음극 6라인 아직 생산중이고 AGV가 해당 구역으로 명령이 들어오고 있습니다 일단 명령 무시하고 진행하고 있겠습니다 June 23, 2025 at 2:51 PM, KIM SEYEON [김세연]_FA : @강기훈 매니저님 노칭 양극 다관절 앞에 2차선 넓히는것 관련해서 스크랩 설비 안쪽으로 몇mm 더 넓히면 되는지 알려주시겠어요? 가능한지 UT에 물어보려합니다. June 23, 2025 at 3:05 PM, 강기훈 : 피엠님 이거 수요일에 알려드려도 될까요?? June 23, 2025 at 3:08 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 23, 2025 at 6:27 PM, 박시우 : @강기훈 매니저님 ISAC 에 긴급 승인 후 사후 결재 하는 방식이 있는데 김상진 차장님 부여받으신 사번 말하면 긴급승인 후 VDI 사용 가능하다고 합니다. Isac 번호 : 1599-2361 June 23, 2025 at 6:27 PM, 강기훈 : 네넵 협력사 인원도 가능한거죠?? June 23, 2025 at 6:28 PM, 박시우 : 네 부여받은 사번만 있으면 제한은 없다 합니다 June 23, 2025 at 6:30 PM, 강기훈 : This message was deleted. June 23, 2025 at 6:30 PM, 강기훈 : 네, 전달 후 그룹핑 원복 후 공유 드리겠습니다 @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희래 *노칭 음극 A구역 점검 완료하였습니다 ODSL점검은 완료 하였으나 티칭점검은 일부 진행이 안되어 이후 별도로 필요시간 확인 후 다시 검토 요청 드리겠습니다 June 23, 2025 at 7:26 PM, 김희래 : @강기훈 매니저님. 조립쪽에서 연락왔는데, 금일 주간에 노칭쪽 생산이 잘 안돼서 재공 좀 쌓아야할 것 같다고 내일 노칭쪽 비가동 점검은 못할 것 같다고 합니다…VD쪽은 작업 할 수 있는지 내일 오전 9시쯤에 연락주기로했습니다. 확인해서 말씀드리겠습니다 June 24, 2025 at 7:37 AM June 24, 2025 at 7:37 AM, 최태영 : @강기훈 @이승엽 매니저님 새벽에 VD agv가 화물이 있는데 전창고 포트에 forking하여 충돌이 있었습니다 관련 메일 보내드릴테니 호기 센서 상태 확인 부탁드립니다 June 24, 2025 at 8:22 AM, 김희래 : @강기훈 매니저님. 금일 양극 노칭 작업 가능합니다. 음극은 불가능하다고합니다. 양극 노칭장비 4대만 작업 가능하다고해서 B구역(4라인쪽) 작업해주시기바랍니다. 중앙동선 라인아웃 방향으로 변경해주시고 작업간 ACS 모니터링은 계속해주시기바랍니다. 작업구역 외에 라인은 원활하게 반송되어야합니다. June 24, 2025 at 9:38 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @박시우 GF NC 양극 B구역 AGV 정위치 및 티칭점검 진행하겠습니다 June 24, 2025 at 9:42 AM, 강기훈 : 오전 노칭 비가동으로 AGV 인원이 해당룸에 투입되어 작업 예정으로 오후에 점검 후 공유 드리겠습니다 @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 피엠님, 새벽에 해당 GF VD AGV#6 별도 조치작업 하신거 있으신지 문의드립니다 현재 양산투입되어 운영 중이라 그렇습니다 June 24, 2025 at 9:44 AM, 강기훈 : @최태영 June 24, 2025 at 10:49 AM, 배병민 (Bae Byoungmin) : 별도 조치는 없었습니다. 6호기문제는 아닌거 같고 Amnormal 상황에서 나올수있는 문제로 보입니다 June 24, 2025 at 10:50 AM, 김희래 : @이연수 매니저님. 노칭 AGV 구간에 ACS에서 길게 블락킹 잡는 구간 점검 요청 메일 드렸습니다. 확인 부탁드립니다 June 24, 2025 at 12:24 PM, 강기훈 : GF NC 양극 B구역 오전 점검 완료하였으나 추가적으로 점검이 필요합니다 잔여호기는 총 3대 (1,2,10)이며 오후에 점검하려 합니다 예상 완료 시간은 15시입니다 잔여호기 3대분은 ODSL점검(주행 정위치)으로 최대한 생산 간섭 안되도록 하겠습니다 EQ 설비 모두 AUTO 변경하여 진행할 예정이며, 동선 및 그룹핑 원복은 최종 완료후 하겠습니다 June 24, 2025 at 12:35 PM, 김희래 : 넵 작업한 구역 가동하면 그쪽으로 LR, UR 몰릴텐데 점검하시면서 반송있으면 우선으로 처리해주시기바랍니다 June 24, 2025 at 1:25 PM, 김지수PM(Gyuri)_FA : 1F음극 VD ACS > 후창고 아웃포트 문제가 있어서 VD로 이송이 90분이상 지연이 났고 40분전 해결이됐습니다. 근데 ACS에서는 해당 잡들 다 Queued 상태에 AGV들 다 놀고있는데, 일일이 다시 명령걸어줘야 하나요? June 24, 2025 at 2:37 PM, 김희래 : @심찬울 매니저님. 오전에 설명드린 로봇 공공플레이트 이동하지 않는 현상 음극 2호기에서도 지금 나오고 있습니다. 5034에서 이동하지 않고 있습니다. 확인 부탁드립니다 June 24, 2025 at 3:05 PM, 김희래 : @강기훈 매니저님. 양극 점검 종료 예상시간 확인 부탁드려요. June 24, 2025 at 3:19 PM, 강기훈 : 지금 종료하였습니다 노칭 양극 ACS 그룹핑 및 동선 원복 진행하겠습니다(10분 예상) June 24, 2025 at 3:22 PM, 강기훈 : @최태영 @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) @김희래 @박시우 GF VD 음극 6호기 금일 새벽 발생된 충돌 관련 현장점검 내용 공유 드립니다 1. 현상 - AGV가 EQ에서 ULD 시 1단 FORK에 미감지되어 자재 없는것으로 판단 - 현 AGV INTERLOCK 중 CARGO SENSOR 2개 중 하나만 미 감지되면 ERROR 발생으로 살정됨 (2개 미 감지 관련 에러없음) - ULD시 플레이트가 핀에 올라탄 후 CARGO SENSOR 2개에 모두 SENSING이 안되면 별도 ERROR 발생 안되었으며 시스템(ACS)에서는 해당 자재 DATA 삭제 후 반송 진행(ACS는 정상 로직으로 운영) - 실제 AGV에 PLATE가 존재하나 센서 및 시스템 상 실자재가 없다 판단하여 다른 포트에서 LD 진행 시 충돌 발생 2. 조치방안 - GF VD 양음극 티칭점검(비가동 점검계획 수립완료) 시 해당 June 24, 2025 at 3:26 PM, 최태영 : 공유감사합니다 이러면 진짜 source에서 자재가 없는데 job을 하러오면 어떻게 되나요? 전방 화물 감지 사용할까요? 상위단으로 소스 엠티 보내야하긴 해야할것 같아서 여쭤봅니다 June 24, 2025 at 3:33 PM, 강기훈 : AGV PLC 기준으로 공유드리면 잡 생성되어 EQ나 PORT에서 ULD하여 FORK 접은 후 SENSOR 조건 확인하여 ABNORMAL 시 CARGO STATUS ERROR 발생합니다 그리고 현재 전방화물(더블스토리지)는 LD시에만 채크합니다 June 24, 2025 at 6:21 PM, 김희래 : @이연수 음극 노칭 AGV3호기 Idle상태로 잡 안 받고있는데 확인해주세여 June 24, 2025 at 6:34 PM, 김희래 : 지금은 8호기 idle입니다. LR UR 쌓였는데 빠르게 확인해주세요 June 24, 2025 at 6:42 PM, 김희래 : @이연수 10호기 잡 안받아서 메뉴얼 돌렸다가 오토 돌렸더니 명령 받았습니다 June 24, 2025 at 6:52 PM, 이연수 : 큐에 잡이 23개 쌓였군요. 매뉴얼 안 돌리셔도 됩니다. June 24, 2025 at 6:53 PM, 김희래 : 매니저님. 충전 중인 호기 잡 삭제하면 충전 취소하고 잡 수행하나요?? June 24, 2025 at 7:01 PM, 이연수 : Soc가 문제죠. 그게 조건을 만족해야 합니다 June 24, 2025 at 7:03 PM, 김희래 : 네 방금 10호기 UR 명령받고 출발지 위치 거의 도착해서 다시 idle됐습니다 June 24, 2025 at 7:05 PM, 이연수 : 오전에 PreAssign 파라미터 뭘 수정하신거죠? 어싸인에 문제가 있어보입니다. June 24, 2025 at 7:06 PM, 김희래 : Preassign incentive 20초에서 5초로 바꿨습니다 June 24, 2025 at 7:07 PM, 이연수 : 그럼 쓰레쉬홀드도 같이 줄인건가요? June 24, 2025 at 7:07 PM, 김희래 : 이것만 요청드렸습니다 June 24, 2025 at 7:07 PM, 이연수 : 권기홍그룹장님 안계신가요 June 24, 2025 at 7:07 PM, 김희래 : Photo June 24, 2025 at 7:07 PM, 김희래 : 어떤거 수정하셨는지는 김상진 차장님이랑 통화해봐주세요 June 24, 2025 at 7:20 PM, 김희래 : @이연수 Pre assign이 로봇쪽에서 잘 안먹는거같습니다. 실 내려놓고 공 안뜨고 나가는 경우 있는데 원인파악 오래걸리시면 일단 20초로 원복하시죠 June 24, 2025 at 8:49 PM, 권기홍 : m:n 최적화 정책을 greedy로 바꾸는게 어떨까요? June 24, 2025 at 8:50 PM, 권기홍 : m:n최적화 한답시고 뒤에 vhl에 양보하는 경우가 자주 발생하는 것 같아보여요 June 25, 2025 at 1:58 PM June 25, 2025 at 1:58 PM, 김희래 : @강기훈 매니저님. 양극 노칭 5호기, 8호기 AGV 서로 블락되어있습니다. 신규로 추가한 동선인데 확인 부탁드립니다. June 25, 2025 at 2:07 PM, 강기훈 : @김희래 @박시우 @연해리 명일 장폭롤 버퍼스테이션 접점변경(A->B) 관련 AGV to 스테이션 이적재 테스트 진행하려 합니다 테스트자재 2개 섭외 부탁드립니다 (현재 이전 공유주신 테스트 자재 중 RBC4282만 5번 창고에 보관 중) June 25, 2025 at 2:14 PM, 강기훈 : @김희래 피엠님 명일 노칭 양음극 비가동 가능구역 확인 부탁드립니다 명일 가능하면 작업 진행하려 합니다 @KIM SEYEON [김세연]_FA 피엠님, 명일 정위치, 티칭점검 시 교육필요 인원 보내주시면 같이 진행하겠습니다 June 25, 2025 at 2:19 PM, 김희래 : 확인하고 말씀드리겠습니다. 그리고 점검했던 음극 6라인쪽에 어제 Align SW limit 알람 발생했습니다. 6라인쪽 어제 데이터 보시고 확인 부탁드립니다 June 25, 2025 at 3:08 PM, 김희래 : 명일 우선 양극 2개구역 오전/오후로 진행해주시면됩니다(C,D구역). 음극은 현재로써는 명일 진행이 어렵다고하는데, 오전에 다시 문의해서 가능하다고하면 양극 1개구역, 음극 1개구역 진행하면될 것 같습니다. 우선 양극 2개 구역으로 준비해주시면됩니다. June 25, 2025 at 3:13 PM, 강기훈 : 네, 확인 감사합니다 어제도 점검 시 비생산이 안되어 작업지연이 되었습니다 명일 점검 시 살비 비가동 될 수 있도록 부탁드립니다 June 25, 2025 at 4:04 PM, 강기훈 : @김희래 @박시우 @배병민 (Bae Byoungmin) 김희래 피엠님, GF VD AGV CARGO SENSOR INTERLOCK 조건 추가로 테스트 위해 EQ설비 지원이 필요하여 한국진공 담당자 명일 오전 10시 30분에 지원 가능한지 문의드립니다 1. 테스트 내용 : 임의의 TEST PLATE EQ챔버에 등록 후 AGV통한 반송 진행 2.필요사항 : 비생산 EQ설비와 AGV PIO TEST 진행 위해 임의 TEST PLATE를 EQ설비에 등록 June 25, 2025 at 5:05 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) @김희래 @박시우 조립동 AGV TRAVEL OVERLOAD 관련 최근 발생 원이이 AGV TOUCH PANEL RESET BUTTON 2초 이상 누를 시 OPTION이 걸려있어 TRAVEL MOTOR ERROR 부하율 값을 RESET 되어 발생되는 현상이 있습니다 해당 내용은 7월 1, 2, 3일 GF/1F 조립 AGV PROGRAM 전체 횡전개 예정입니다 (해당 기간 카고 인터락 조건 포함) June 25, 2025 at 5:10 PM, 배병민 (Bae Byoungmin) : 네 제가 조립 통하여 한국진공 대응되게 요청해놓겠습니다. 확인하고 재 공유 드리겠습니다 June 25, 2025 at 5:15 PM, 김희래 : 제가 한국진공 최정한님께 연락드렸었는데, 김동섭 부장님으로 근무 교대되었다고합니다. June 25, 2025 at 5:45 PM, 강기훈 : 이후 한국진공 담당자와 현장에서 만나서 문의시항 및 필요사항 확인했습니다 감사합니다 June 26, 2025 at 8:43 AM June 26, 2025 at 8:43 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 @박시우 1F Stacking Buffer Station 자재가 차주 월요일(6/30) 반입 예정입니다. 1. 작업 담당자분 출입 신청하였습니다. 승인 부탁드립니다. 2. 반입 당일 하차를 위한 지게차 사전 준비 부탁드립니다. (상세 도착 시간은 별도 공유 예정) 3. 반입 후 1F stacking 위치에 보관 대기 예정입니다. 4. 전일 메일 전달 드린 station 100mm 뒤로 이동하는 건 확인 회신 바랍니다. June 26, 2025 at 8:46 AM, 최대운 : @KIM SEYEON [김세연]_FA 7/1일부터 조립동 AGV 3단계 비밀번호 변경을 하고자 합니다. (1-2단계는 그대로 유지, 설정에 관련없는 단계) 1. 비밀번호는 AGV 호기별 터치판넬에서 하나하나 수기 변경 필요로 CS인원 일부와 진행 예정, 2-3일정도 소요 예상 2. 변경 비밀번호 별도로 알려 주십시오. 3. 전극동은 7월 중순이후 변경 예정 June 26, 2025 at 9:30 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) @박태영 @동휘 Donny @최종건 @정연동 @이승천 금일 진행 예정인 장폭롤 버퍼스테이션 자재 안착감지센서 사양 변경으로 테스트내용 공유 드립니다. 1. 사유 : 장폭롤 버퍼스테이션 접점변경(A->B) 관련 스테이션 PLC LR/UR LOGIC이 변경되어 AGV to 스테이션 이적재 테스트 진행 2. 테스트 방안 : 테스트자재(RBC4282 양극 5번 롤창고에 보관 중)등록하여 롤 버퍼스테이션 2개소(C2NCBC01_P08, C2NCBC02_P01)에 이적재 반복 테스트 예정 3. 시간 : 오전 10시-11시 30분 이상입니다 June 26, 2025 at 9:41 AM, 강기훈 : This message was deleted. June 26, 2025 at 9:46 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) @김희래 @박시우 @최종건 @정연동 @이승천 금일 진행 예정인 GF VD AGV CARGO SENSOR INTERLOCK 추가 관련 테스트 내용 공유 드립니다 (장폭롤 테스트 완료 후 이어서 진행예정으로 시작시간은 변동될 수 있음) 1. 사유 : GF VD AGV ULD 중 ABNORMAL CASE 발생으로 CARGO SENSOR 감지조건 INTERLOCK 추가 및 횡전개 전 테스트 필요 2. 테스트 방안 : - GF VD 음극 전창고 공PLATE 4개 테스트자재 등록 후 비생산 EQ설비(OVEN CHAMBER)에 반송진행 - EQ설비에서 후창고 반송 전 EQ설비에 적재되어 있는 테스트 자재 1단 임의제거(단, EQ설비 내 안착감지 센서는 임의로 감지시켜 데이터는 있으나 실물은 없는 상황으로 준비)후 ACS 통한 후창고로 수동반송 진행 - AGV가 테스트 June 26, 2025 at 9:47 AM, 강기훈 : @박태영 @동휘 Donny 피엠님, 상기 내용 참고 부탁드립니다 June 26, 2025 at 9:53 AM, 강기훈 : ㅍ엠님, 오늘도 현장에 제대로 전달이 안된 것 같습니다 해당 라인 설비 생산 진행 중이라 작업에 간섭이 발생됩니다 바쁘시겠지만 확인 부탁드립니다 June 26, 2025 at 10:05 AM, 정연동 : @박태영 @동휘 Donny @강기훈 @이승천 운영 라인 테스트 상황으로 RTD 반송룰 변경건입니다. 현장 공유가 조금 늦은거 같아 추가 설명 드립니다. 1. 장폭 롤 스테이션 LR/UR 룰 변경 후 반송 테스트 2. GF VD 설비 특정 호기의 LR 룰 변경 후 반송 테스트 이승천 책임, RTD 운영 룰 일부 변경해서 지원 예정입니다. June 26, 2025 at 10:08 AM, 박태영 : 알겠습니다 June 26, 2025 at 10:11 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) @김희용 @박시우 피엠님, 요청주신 분체 양극 4호기 라이다 광학보정 작업 후 라인투입 하겠습니다 *4호기 이전과 동일하게 포크팁센서가 없는 상황에서 투입으로 해당 내용 인지하시어 운영 부탁드립니다 June 26, 2025 at 10:11 AM, 강기훈 : @김희래 June 26, 2025 at 10:21 AM, 강기훈 : This message was deleted. June 26, 2025 at 10:54 AM, 박태영 : RTD ORACLE ERROR 발생한 부분 확인 중이십니까 June 26, 2025 at 10:56 AM, 정연동 : 확인해 보겠습니다. June 26, 2025 at 11:03 AM, KIM SEYEON [김세연]_FA : 죄송합니다. 포크팁센서 저희가 달고 on하겠습니다. 투입하지 말아주세요. 사고날까봐서요. June 26, 2025 at 11:08 AM, 이승천 : RTD 테스트 룰 적용하고 테스트시 , SQL에 존재하지 않는 view를 검색하는 처리가 있어서 oracle 오라클 에러 발생했습니다. 룰 적용에있어 재차 확인하고 적용하도록 주의하겠습니다. June 26, 2025 at 11:09 AM, 박태영 : 계속 발생합니다 June 26, 2025 at 11:19 AM, 정연동 : RTD 테스트 룰 관련 오라클 에러는 오전 8시 40분 경에 1회 발생했고, 이 후 발생하는 오라클 에러는 반송 로직 수행시 발생되는 부분입니다. June 26, 2025 at 12:19 PM, 강기훈 : 장폭롤 테스트 종료하였습니다 접점변경 후 LR/UR 및 어브노멀 에러발생 등 특이사항 없이 완료하였습니다 *VD GF TEST는 오후 1시 30분부터 진행예정입니다 June 26, 2025 at 12:20 PM, 이승천 : RTD 룰 원복했습니다. June 26, 2025 at 12:48 PM, 김희래 : @강기훈 매니저님. 양극 노칭 C구역 작업 완료하시면 말씀해주세요. 음극은 오후에 안된다고하니 양극 D구역 오후에 하시죠 June 26, 2025 at 12:56 PM, 강기훈 : 1. GF NC 음극 C구역 AGV 9대 티칭 점검 완료하였고 잔여호기 1대 미완료 되었습니다 금일 오후나 명일 마무리하겠습니다. 2. 오후 2시 30분부터 동선변경 후 D구역 작업진행 하겠습니다 June 26, 2025 at 12:57 PM, 박시우 : 매니저님 양극 말씀이시죠? June 26, 2025 at 1:10 PM, 강기훈 : 넵 June 26, 2025 at 3:15 PM, 박태영 : Photo June 26, 2025 at 3:15 PM, 박태영 : AX도 함께 확인해주세요 June 26, 2025 at 3:16 PM, 박태영 : 얼마전에 발생한 내용과 비숫할것 같은데 June 26, 2025 at 3:16 PM, 박태영 : 인프라에서 문제 있으면 공유하겠습니다 June 26, 2025 at 3:19 PM, 강기훈 : 일단 공정별 인원분배해서 에이지비 위치 다시 잡아줄 예정입니다 원인은 별도로 확인해보겠습니다 June 26, 2025 at 3:43 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @김희래 @박시우 @박태영 GF 전극조립 복구 완료했으며 1F도 곧 복구 완료 예장입니다 June 26, 2025 at 3:44 PM, KIM SEYEON [김세연]_FA : 조치 감사합니다. June 26, 2025 at 3:55 PM, 최대운 : 조치 완료했습니다. June 26, 2025 at 4:25 PM, 강기훈 : GF VD 음극 테스트는 차주 월요일(6/30) 오전에 진행하는 것으로 변경했습니다 June 26, 2025 at 4:35 PM, KIM SEYEON [김세연]_FA : 네 June 27, 2025 at 7:17 AM June 27, 2025 at 7:17 AM, 김희용 : @이연수 매니저님 금일 긴급으로 GF NC 양음극 AGV LR전용호기 2대 반영 요청드립니다. LR전용호기 2대는 전체 포트 대응하도록 해주십시오 June 27, 2025 at 7:18 AM, 김희용 : @KIM SEYEON [김세연]_FA 실장님 긴급지시로 일단 LR 전용호기2대 반영하겠습니다. 기존보다 블락은 덜해진상태로 적용 후 모니터링 예정입니다 June 27, 2025 at 7:20 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 27, 2025 at 8:41 AM, 최대운 : @KIM SEYEON [김세연]_FA @연해리 7/1일 CEO 방문으로 스테이션 작업이 어려울것 같아 7/1일 오후에 반입/댜기 해놓고 7/2일부터 작업 진행하도록 하겠습니다. June 27, 2025 at 8:42 AM, 연해리 : 네 감사합니다 June 27, 2025 at 8:43 AM, 최대운 : 반입을 위해 CEO 일정 확인 후 반입 가능한 시간만 알려주십시오 June 27, 2025 at 8:49 AM, 연해리 : 라인투어 일정이 15~17시로 되어 있어서 17시 이후에 반입 진행 부탁드립니다 June 27, 2025 at 8:51 AM, 최대운 : 17시는 어렵습니다. 그럼 최대한 빨리 반입하고 나오는게 나을것 같습니다. 17시까지 기다릴수가 없을것 같습니다. June 27, 2025 at 8:52 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 @박시우 금일 GF 노칭 음극 비가동 가능 구역 알려주십시오. 음극 가능한 구역 점검 예정입니다. June 28, 2025 at 10:31 AM June 28, 2025 at 10:31 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 @박시우 GF 양극 노칭은 일부 호기만 일부 남았으며, 음극은 6라인쪽은 끝났으나 나머지 라인은 유선상으로 말씀드렸듯이 비가동이 안되고 다른 일정들이 있어 티칭 마무리 점검은 어렵습니다. 말씀드린대로 ODSL설정 등 교육 시켜드린다고 말씀드렸으며, 일정 잡아주시면 진행하겠습니다. June 28, 2025 at 10:31 AM, KIM SEYEON [김세연]_FA : 네 차주에 일정 잡아 공유드리겠습니다. June 28, 2025 at 10:39 AM, KIM SEYEON [김세연]_FA : @Lee Junghan(이정한)_CS @JAEYOON KIM / CS 매니저님 CS팀은 상기 ODSL설정 등 교육 다 되어있는거죠? June 28, 2025 at 10:43 AM, JAEYOON KIM / CS : 네, ODSL설정 및 티칭들은 전원 교육 완료되었습니다. June 28, 2025 at 10:58 AM, 최대운 : @KIM SEYEON [김세연]_FA @지석범PM (이반차FA) @Lee Junghan(이정한)_CS @JAEYOON KIM / CS 전일 전극코터 계속 Retry 발생의 건 - 원인: 이재기로부터 헤딩(턴값) 옵셋 값 받는 프로그램이 일부 잘못 짜여져 있어 잘못된 부호 값을 AGV 전달 - 수정: 지석범pm의 도움으로 프로그램 수정 보완 - 금일 수정된 프로그램 확인하였고, AGV 도킹전 수동으로 헤딩값 반대 값으로 설정하고 제대로 이재기로부터 옵셋값 제공받는지 확인 및 모니터링 함. 이상없이 잘 수행함 June 28, 2025 at 10:59 AM, JAEYOON KIM / CS : 저도 금일 추가 모니터링 진행하도록 하겠습니다. June 30, 2025 at 3:47 AM June 30, 2025 at 3:47 AM, 송광진PM FA장비unit : 어제 로봇3호기 속도90 적용 시점 리플레이 시 agv가 실내려놓고 공매거진 뜨는 사이클이 딱 맞습니다. 속도 원복 이후에는 타이밍이 안맞아서 lr못뜨는 돌아나오는 현상 확인되어 로봇 속도 90은 기본 운영조건으로 보입니다. *속도 100 운영 시 이점으로는 로봇 UR이 공매거진 적재 중인 곳과 반대에서 진행 중일 경우(공매거진 버퍼 빈케이스)ur이후 근접 포트 내 lr까지 반송할 케이스를 만들 수 있을 것으로 보입니다 사이클 타임 및 해당포트의 텍타임등도 분석해보고 공유드리겠습니다 June 30, 2025 at 7:13 AM, 최태영 : 음극의 경우에는 로봇3호기 속도90 적용 시점 리플레이 시 선행 agv가 실mgz내려놓고 후행agv가 실mgz 내려놓는 사이클도 맞습니다. 로봇이 실자재를 바로 이재하는 경우에만 해당 사이클내로 들어왔고 후행 agv가 dest 인터락이 없이 UR했습니다 송광진pm님이 말씀하신 case에서 공 자재 준비가 안되어 UR만 두개 작업한 상황입니다. 이건 더 빠른 조건인데 가능했습니다. July 1, 2025 at 8:48 AM July 1, 2025 at 8:48 AM, Kim Dongju(김동주)_FA : [중요] 금일 VIP 조립 현장 투어가 10시부터 있습니다. 현장에 계신 모든분 장갑과 마스크 꼭 착용해 주십시오.. July 1, 2025 at 10:11 AM, 강기훈 : @Kim Dongju(김동주)_FA @방혁 PM(Bang.Hyuk) FA 브이디 양극 1호기 및 EQ6-1 시연 관련 에이지비 호기 지정하셔서 현재 1호기 베터리가 부족하여 메뉴얼 충전 중 입니다 VIP 오시면 공유 부탁드립니다 바로 스탠바이하겠습니다 July 1, 2025 at 10:15 AM, Kim Dongju(김동주)_FA : 네..알겠습니다. July 1, 2025 at 10:18 AM, 조수형팀장 SKO/FA운영팀 : 제조총괄님 10시 30분쯤 라인 들어가실걸로 예상합니다. 아직 보고 진행 중입니다. July 1, 2025 at 10:34 AM, 조수형팀장 SKO/FA운영팀 : 보고 마무리 합니다. 라인으로 출발 할 때 공유드리갰습니다. July 1, 2025 at 10:41 AM, 조수형팀장 SKO/FA운영팀 : 이제 출발해요 July 1, 2025 at 7:16 PM, 김희래 : @최대운 @강기훈 매니저님. 7/7(월) 1F Stacking buffer station 작업 관련 9라인 일부구역 8시간 비가동 협의 완료하였습니다. 참고부탁드립니다. July 1, 2025 at 7:21 PM, 강기훈 : 피엠님, 감사합니다 해당 일정에 미스타호기 티칭작업 진행하겠습니다 July 2, 2025 at 8:22 AM July 2, 2025 at 8:22 AM, 강기훈 : 2번항목에 대한 GF VD 음극 AGV TEST 관련 명일 오전 9시 30분(한국시간 4시 30분)에 진행하려 합니다 업무에 참고 부탁드립니다 *필요사항 및 참고사항으로 TEST 시작 전 VD 전창고에 보관 중인 공 PLATE 4EA TEST 자재 등록 및 EQ설비 1대 약 1시간 30분 동안 테스트 진행 예정입니다(테스트 진행 EQ설비 해당시간 자동반송 어려움) July 2, 2025 at 8:24 AM, 강기훈 : @Kim Dongju(김동주)_FA @연해리 @배병민 (Bae Byoungmin) @김희래 @박시우 @김희용 이전 공유드린 GF VD AGV CARGO SENSOR INTERLOCK 추가 관련 테스트 건 입니다 July 2, 2025 at 4:41 PM, Sazzad Bhai SKon invited MCS/RTD System. July 3, 2025 at 8:56 AM July 3, 2025 at 8:56 AM, 김희래 : @강기훈 매니저님. 1F 공플레이트 현장에 있는 대상들 사용하는거 제조에 공유했고, 사용 가능한 것으로 확인했습니다. 사용 후 Stacking쪽 컴퓨터 앞에 놔주시면된다고합니다. 저희 작업에 사용할 수량 공유해주시고, 사용 후에 분실되지 않도록 관리 부탁드립니다. July 3, 2025 at 9:01 AM, 이석규 매니저 left this chatroom. July 3, 2025 at 9:04 AM, 강기훈 invited 이석규 매니저. July 3, 2025 at 9:51 AM, 강기훈 : This message was deleted. July 3, 2025 at 9:51 AM, 강기훈 : 전일 공유드린 GF VD 음극에서 AGV CARGO INTERLOCK 조건추가 테스트 진행하겠습니다 테스트내용 1. 테스트 자재(공플레이트) : MLA4146, MLA4096, MLA3045, MLA6110 2. 테스트 설비 : EQ설비 6-9 3. 테스트 시간 : 9시 50분 ~ 10시 50분 4. RTD에서 TEST 자재 EQ6-9로 자동반송 -> AGV 이적재 -> EQ설비에 안착된 1단 테스트자재 제거 -> ACS 통한 이적재 -> 인터락 조건 및 에러 확인 -> 테스트 완료 후 테스트자재 후창고 반송 및 원복 이상입니다. July 3, 2025 at 12:10 PM, 강기훈 : 테스트 종료하였습니다 AGV 인터락 일부 수정이 필요하여 이후 재 테스트 진행 필요하며 일정 재 공유 드리겠습니다 July 3, 2025 at 12:15 PM, 이승천 : RTD 룰, 테스트 자재 원복 했습니다. July 3, 2025 at 1:30 PM, Kim Dongju(김동주)_FA : @All 오늘 전극동 2시에 VIP 투어 예정입니다. 현장에서 마스크 장갑 꼭 착용 부탁드립니다. July 3, 2025 at 1:39 PM, 김주연 : @이연수 @박종원 @Lee Junghan(이정한)_CS (김택환 차장님 참석필요) 매니저님, 오후 2시에 미팅 가능하신지 여쭤봅니다. 안건은 1) 공매거진 bcr 제외 방안 2) NC 로봇 컨베이어 순환 시나리오 (pair job 생성) abnormal case 검토 입니다. July 3, 2025 at 1:42 PM, 김주연 : 행정동 2F 회의실에서 진행하겠습니다. July 3, 2025 at 1:46 PM, 최병준 : 오전에 미팅 진행했던 sandor룸 입니다. July 3, 2025 at 9:19 PM, 조수형팀장 SKO/FA운영팀 : @이연수 @최대운 @강기훈 방실장님이 부문장께 별도 연락했음 방실장님 미팅 내일 아침 8시 시너스텍 실무자 참석 필수 -AGV동선 -AGV할당로직 -AGV도킹속도 DAIM 내일 아침 9시에 미팅 참석 요청해 주세요. July 5, 2025 at 9:12 AM July 5, 2025 at 9:12 AM, 조수형팀장 SKO/FA운영팀 : @이연수 매니저님 로봇 택타임 딘축 미팅 차주 월요일 1시30분에 해요. 김상진차장,김택환차장께 일정조율 부탁드립니다. 시퀀스 다이어그램 미리 준비해 주십시오.(robot, c/v plc, ccs, mcs) July 7, 2025 at 2:19 PM July 7, 2025 at 2:19 PM, 최대운 : @박시우 @강기훈 @이석규 매니저 1F stacking buffer station 금일 전장작업을 위해 오후 4-5시 사이 비가동 발생되니 사전에 제조 공유 부탁드립니다. July 7, 2025 at 5:04 PM, 김주연 : @Kim Dongju(김동주)_FA @이연수 @김희용 AGV 버그 수정 패치 검토 미팅 미팅번호 2515 744 5221 비밀번호 1234 미팅 시작 5:30부터 하겠습니다. July 7, 2025 at 5:19 PM, 김주연 : @이연수 매니저님 조재찬팀장님 참석요청드립니다. 연락부탁드립니다 July 7, 2025 at 5:20 PM, 이연수 : 연락이 안되네요. 퇴근 중인 듯 합니다. July 7, 2025 at 5:28 PM, 김희용 : 시뮬레이션과 시뮬레이션 로그데이터는 접근가능하지요? July 7, 2025 at 5:50 PM, 최병준 : 명일 오전 8시(헝가리 시간 기준)에 Capa up 과제 daily 미팅을 진행합니다. 관련 인원들께서는 전원 참석 부탁드립니다. 상세 내용은 메일 송부예정이오니 참고해주세요. July 7, 2025 at 5:54 PM, 조수형팀장 SKO/FA운영팀 : 부문장님, 강팀장님, 이반차FA, DT 같이 메일 드리겠습니다. July 7, 2025 at 8:42 PM, 김희래 : @강기훈 @최대운 노칭 음극 AGV 비가동 일정은 우선 기존대로 수요일 오전으로 준비부탁드리며, 최종 확정은 명일 다시 확인 후 공유드리겠습니다. July 8, 2025 at 9:03 AM July 8, 2025 at 9:03 AM, 김주연 : @이연수 매니저님 July 8, 2025 at 9:03 AM, 김주연 : 웹액스 번호 2519 477 6165 비밀번호 1234 입니다 다임리서치측에 전달 부탁드립니다. 회의 몇시에 진행하나요? July 8, 2025 at 10:12 AM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 @박시우 @최병준 GF 노칭 음극 동선 고 변경 예정입니다. 1. 음극 로봇 옆 릴대차 정리 부탁드립니다. 작업자 더이상 두지 않도록 공지 및 바닥 마킹 요청드립니다. 2. 1라인과 4라인 사이 기둥쪽 대차도 이동 부탁드립니다. 숏컷 반영 예정입니다. July 8, 2025 at 12:44 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 시너스텍 도시락 행정동 2F 제자리 뒤에 받아놨습니다. 잘 마무리 부탁드립니다. July 8, 2025 at 12:44 PM, 최대운 : 마무리 잘될것 같습니다. 저하고 강기훈 매니저랑 받으러 갈게요 July 8, 2025 at 12:45 PM, 최대운 : 식사는 최종완료하고 생산 진행하면 돌아가면서 먹도록 하겠습니다. July 8, 2025 at 12:46 PM, KIM SEYEON [김세연]_FA : 감사합니다. July 8, 2025 at 12:47 PM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA GF NC 음극 3호기 원점 복귀 미흡 관련 점검결과 FORK AXIS SERVO DRIVE (WELCON사: WER-D048/10-FS04F7-C) 이상으로 확인됩니다 스페어 재고 공유 주시면 현장작업 후 동선변경으로 인한 티칭점검 마무리작업 이어서 진행하겠습니다 *점검결과 : 드라이버 컨넥터 단자 문제로 확인 July 8, 2025 at 12:50 PM, 강기훈 : @Lee Junghan(이정한)_CS @JAEYOON KIM / CS July 8, 2025 at 1:07 PM, Kim Dongju(김동주)_FA : 매니저님 해당 부품은 저희가 재고로 가지고 있습니다만, BOM 내역에는 없는 품목입니다. AGV BOM list 최신화 부탁드립니다. July 8, 2025 at 1:08 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 현재 추가 맵 업데이트 해야 되나, 음극로봇 1호기 옆 수동 포트 펜스 한쪽이 아직 완료가 되지 않은 상태입니다. 1. 펜스 제거하고 완료 되면 맵업데이트 및 ACS 변경 후 생산 진행 2. 펜스 제거에 시간이 더 소요 되니 우선 생산 진행하고 오후에 펜서 제거 완료되면 오후에 한번 더 업데이트 진행 방안(업데이트스 ACS 잠시 OFF됩니다. ) 둘중 하나 확인 후 회신 주시면 진행하겠습니다. July 8, 2025 at 1:09 PM, KIM SEYEON [김세연]_FA : 2번으로 진행 부탁드립니다. 번외로, 혹시 강희두 매니저님은 몇시에 끝나실것 같다고 하시나요? July 8, 2025 at 1:10 PM, 김희래 : 현장에서 보고있는데 한쪽 작은 파티션은 뗐고 큰 파티션 떼려고합니다 July 8, 2025 at 2:44 PM, KIM SEYEON [김세연]_FA : @최대운 매니저님 음극 노칭 펜스제거작업 완료입니다. July 8, 2025 at 2:53 PM, 최대운 : 네, 현장에서 확인 했습니다. 곧 AGV 맵업데이트 할 예정입니다. 진행할때 말씀드리겠습니다. July 8, 2025 at 2:54 PM, KIM SEYEON [김세연]_FA : 혹시라도 해당 메뉴얼포트로 AGV 진입하지 않도록 시스템상. AGV알람으로도 막아주세요. July 8, 2025 at 3:03 PM, 강기훈 : CCS 상에서 해당 포트 PAUSE 및 ACS상에서 해당 노드(173) AGV 정차할 수 없도록 해놨습니다 별도로 해당포트 MCS, RTD에서 미사용 모드로 전환 부탁드립니다 July 8, 2025 at 3:04 PM, 강기훈 : @김희래 @김주연 July 8, 2025 at 3:11 PM, 김희래 : MCS에서 Out of service 전환했습니다 July 8, 2025 at 3:13 PM, 김희용 : PIO Ready Off가 음극 NC AGV #5에서 계속 발생중입니다 July 8, 2025 at 3:23 PM, 강기훈 : AGV 및 ACS 맵업데이트 작업진행 하겠습니다 포트구간 동선변경 및 숏컷추가 건 입니다 July 8, 2025 at 3:54 PM, 김희래 : @강기훈 매니저님. 동선 변경 후 로봇3호기쪽 164번노드에서 Ready Off 알람 7건 발생했는데 현장에 전달 부탁드립니다. July 8, 2025 at 3:56 PM, 김희용 : 전달하고 확인하기로했습니다 July 8, 2025 at 3:58 PM, 강기훈 : 조치 완료했습니다 July 8, 2025 at 3:59 PM, 최병준 : 안녕하세요. 금일 Capa up 진행현황 wrap-up 미팅을 17시에 진행하고자 합니다. 오전 미팅 참석하셨던 과제별 담당자분들께서는 상기 시간에 재참석 부탁드리겠습니다. 감사합니다. (회의실 동일) July 8, 2025 at 4:03 PM, 김희용 : 예 모니터링 해보겠습니다 July 8, 2025 at 4:31 PM, 강기훈 : GF NC 양극 MP 포트 휀스 이동구역 역시 ACS와 CCS에서 PAUSE 및 미정차 하도록 조치했습니다 상위에서도 전환 부탁드립니다 July 8, 2025 at 4:36 PM, 김희래 : MCS에서 Out of service 전환했습니다 July 9, 2025 at 8:01 AM July 9, 2025 at 8:01 AM, 최병준 : 매니저님들 미팅 오시고 계시죠?? July 9, 2025 at 11:38 AM, 최대운 : @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA @김희래 @박시우 GF 노칭 음극 3-3 호기 배출부 쪽 가이드 롤러가 휘어져 있습니다. 포크랑 간섭 발생할수 있어서 빠른 조치가 필요합니다. 전도 위험이 있습니다. July 9, 2025 at 12:39 PM, 최대운 : @KIM SEYEON [김세연]_FA @김희래 GF 노칭 음극 숏컷 구간에 작업자가 대차를 두고 있습니다. 작업자 교육 인지 부탁드립니다. July 9, 2025 at 12:47 PM, 김희래 : 네 제조에 공유 다시하겠습니다 July 9, 2025 at 4:22 PM, 최병준 : 안녕하세요. 금일 Capa up 진행현황 wrap-up 미팅을 17시에 진행하고자 합니다. 참석대상 및 장소는 어제와 동일합니다. July 10, 2025 at 8:01 AM July 10, 2025 at 8:01 AM, 조수형팀장 SKO/FA운영팀 : 매니저님들 어서 오십쇼 July 10, 2025 at 9:10 AM, 최대운 : @조수형팀장 SKO/FA운영팀 @KIM SEYEON [김세연]_FA 금일 GF 양극 수동포트쪽 동선 개선 반영은 11시 이후부터 가능합니다. 제조하고 협의 후 시간을 알려주시면 시간 맞추어 반영하겠습니다. July 10, 2025 at 9:11 AM, 조수형팀장 SKO/FA운영팀 : 네 July 10, 2025 at 10:07 AM, KIM SEYEON [김세연]_FA : This message was deleted. July 10, 2025 at 10:07 AM, KIM SEYEON [김세연]_FA : Photo July 10, 2025 at 10:07 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 15시에 진행부탁드립니다. July 10, 2025 at 10:10 AM, 최대운 : 네 알겠습니다. July 10, 2025 at 11:35 AM, 조수형팀장 SKO/FA운영팀 : GF 음극 AGV 알람 뜨는 호기가 많습니다. 현장에서 봐주고는 있는데, 빠흔 조치가 안 되어 길막하고 있습니다. July 10, 2025 at 11:42 AM, KIM SEYEON [김세연]_FA : Photo July 10, 2025 at 11:43 AM, KIM SEYEON [김세연]_FA : @최대운 매니저님 상기 플레이백 보시고 확인 가능하신가요? July 10, 2025 at 11:47 AM, 최대운 : 네 현장에서 확인하고 말씀드리겠습니다. July 10, 2025 at 12:24 PM, 강기훈 : 해당 발생 사유는 133번(AGV#3), 134번(AGV#4) 분기 턴 노드구간에 에이지비 2대가 동시 위치하여 서로 블럭이 걸린 상황이며, 세부 내용은 하기와 같습니다 상세현황 1. 알람 조치 중 AGV#4를 조그기동하여 134번으로 강제 이동시킨 후 리셋 및 오토모드 전환 2. AGV#4 조그기동 중 위치 잃어버림으로 AGV#3호기 133번으로 자동 이동 3. ACS 운영상 133번 노드와 134번 노드에 에이지비 두대 동시 위치할 수 없음으로 서로 블럭걸림 4. 해당 구간에서 에이지비 2대 동시 턴이 물리적으로 어려운 구간임 추후 알람 조치 후 AGV 이동까지 확인된 다음 조치 마무리가 필요할 것 같습니다 내부적으로도 전달하겠습니다 July 10, 2025 at 12:30 PM, 강기훈 : 결론은 알람조치 후 모니터링 미흡으로 발생한 케이스이며 정상 운영시에는 발생하지 않는 케이스 입니다 July 10, 2025 at 12:35 PM, KIM SEYEON [김세연]_FA : 네 감사합니다 July 10, 2025 at 4:03 PM, 김희래 : @이연수 매니저님. 음극 노칭 2-3호기로 LR 가는 반송 AGV3호기가 크게 돌아서 들어가는데 확인 부탁드립니다(5분 전 플레이백) July 10, 2025 at 4:58 PM, 최병준 : (Remind) 안녕하세요. 금일 Capa up 진행현황 wrap-up 미팅을 17시에 진행하고자 합니다. 참석대상 및 장소는 어제와 동일합니다. July 11, 2025 at 9:50 AM July 11, 2025 at 9:50 AM, 최대운 : @조수형팀장 SKO/FA운영팀 @KIM SEYEON [김세연]_FA 10분뒤 10시에 GF 노칭 양극 동선 변경 업데이트 진행하겠습니다. July 11, 2025 at 10:24 AM, 최대운 : 양극 적용 완료 하였습니다. July 11, 2025 at 10:50 AM, KIM SEYEON [김세연]_FA : 감사합니다 July 11, 2025 at 2:29 PM, 최대운 : @조수형팀장 SKO/FA운영팀 @KIM SEYEON [김세연]_FA 금일 wrap-up미팅 16:30분에 진행 가능할까요? July 11, 2025 at 3:37 PM, 최병준 : 네 금일은 16:30에 진행하겠습니다. July 11, 2025 at 8:04 PM, 김희래 : 19:35에 GF 음극 노칭 포트 skax 계정으로 Passive 처리하신 분 계신가요?? July 14, 2025 at 9:44 AM July 14, 2025 at 9:44 AM, 강기훈 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) GF NC 음극 5호기 FORK1 ENC VAL ABNORMAL ERROR 점검 관련 1. 저번주 토요일(7/12) SERVO DRIVE 교체하여 라인투입 진행하였으며, 현재까지 동일에러 재발이력 없습니다 2. 해당 호기 SERVO DRIVE는 1F NC 음극 17호기에서 파츠 수급하여 교체진행 했습니다 스페어파츠 제공 주시면 17호기에 원복 진행하겠습니다 3. 추가적으로, 기존 SERVO DRIVE는 어디로 반납하면 되는지 확인 부탁드립니다 July 14, 2025 at 3:09 PM, 최대운 : @KIM SEYEON [김세연]_FA GF Buffer station 대신 파츠 제공하고자 합니다. 담당자분 배정해주시면 전달드리겠습니다. 1. Remote I/O : 16개 2. 타워형 경광등 : 32개 3. 광전센서 : 32개 4. 반사판: 32개 5. 스위치 박스 및 스위치 6. 기타 : 배선, 나사, 프로 파일, 케이블 타이 등 July 14, 2025 at 4:27 PM, 강기훈 : @KIM SEYEON [김세연]_FA @연해리 1F 장폭롤 양극 충전기(E-S-SF-193) 트렌스포머 설치를 위해 해당 구간 1차측 전원 차단이 필요합니다 UT와 확인하시어 가능일정 알려주시면 작업 진행할 수 있도록 하겠습니다 July 14, 2025 at 4:48 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 에게 전달 부탁드립니다. July 14, 2025 at 5:01 PM, 최병준 : @all 5시 wrap-up 미팅 참석 부탁드립니다. July 15, 2025 at 1:20 PM July 15, 2025 at 1:20 PM, 최대운 : @KIM SEYEON [김세연]_FA @박태영 금일 1F stacking 버퍼 관련 오후 3시 미팅 징소 알려주시면 참석하겠습니다. July 15, 2025 at 1:23 PM, KIM SEYEON [김세연]_FA : 행정동2층 ZITA로 오세요. July 15, 2025 at 3:06 PM, 최대운 : 2층 회의실 왔습니다. July 15, 2025 at 3:06 PM, KIM SEYEON [김세연]_FA : 네 금방 가겠습니다. July 16, 2025 at 8:23 AM July 16, 2025 at 8:23 AM, 최대운 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA 1F stacking AGV 전원 온 하기 위해 수동 충전기가 필요합니다. 빌려주시면 사용하고 돌려 드리겠습니다. 1개만 빌려주십시오. July 16, 2025 at 8:24 AM, Baek Hojong(백호종)FA : 제가 찾아드릴께요 매니져님 July 16, 2025 at 9:33 AM, 강기훈 : @배병민 (Bae Byoungmin) 피엠님, 상기 내용 관련 파츠 제공 주시면 1F NC 음극 17호기 설치 및 셋팅하려 합니다 바쁘시겠지만 확인 부탁드립니다 WELCON FORK SERVO DRIVE MODEL명 : WER-D048/10-FS04F7-C @KIM SEYEON [김세연]_FA July 16, 2025 at 9:38 AM, Baek Hojong(백호종)FA : @최대운 포터블 충전기 씨너스택 이승민 사원에게 인계했습니다 몆일동안 사용해야한다고 하니 잘쓰시고 반납해주세요 July 16, 2025 at 9:39 AM, 최대운 : 네 알겠습니다. 다 사용하고 반납하도록 하겠습니다. July 16, 2025 at 9:39 AM, 배병민 (Bae Byoungmin) : 네 제가 확인해보고 알려드리겠습니다 July 16, 2025 at 10:11 AM, 배병민 (Bae Byoungmin) : GF 양극 다관절 로봇#2 Port 상부 PC 가림막 프로파일 펜스 돌출 치수가 셋업 및 도면과 상이한데 변경 설치 이력 아시는분 계실까요? 타호기와 40mm정도 안쪽으로되어있어 로봇과 PC간 충돌발생되는부분입니다 July 16, 2025 at 11:00 AM, 김희용 : @이연수 행정동 2F 지타에서 진행예정입니다 July 16, 2025 at 4:26 PM, 배병민 (Bae Byoungmin) : D048/10-FS04F7-E.C.R 이걸로 사용 가능하신거죠? July 16, 2025 at 4:32 PM, 배병민 (Bae Byoungmin) : 제가 1개 챙겨뒀습니다. 내일 드리겠습니다. July 16, 2025 at 4:55 PM, 조수형팀장 SKO/FA운영팀 : wrap up 하시죠, July 16, 2025 at 4:56 PM, 강기훈 : 네, 감사합니다! 내일 파츠 주시면 원복작업 허겠습니다 July 16, 2025 at 5:55 PM, JAEYOON KIM / CS : @강기훈 @연해리 명일 GF ST CA AGV#10호기 배터리 교체 작업 시연 및 교육 관련하여 시간은 09:30으로 괜찮을까요? July 16, 2025 at 5:56 PM, 연해리 : 네 9:30 괜찮습니다 July 16, 2025 at 5:59 PM, JAEYOON KIM / CS : 넵 알겠습니다. 신품 배터리의 경우 3번창고에서 저희측에서 수령하면 될까요? July 16, 2025 at 6:09 PM, 연해리 : 네 명일 전달드리겠습니다 July 16, 2025 at 7:02 PM, JAEYOON KIM / CS : 네 알겠습니다. 20분까지 3번 창고로 가도록 하겠습니다 July 17, 2025 at 8:04 AM July 17, 2025 at 8:04 AM, 조수형팀장 SKO/FA운영팀 : 데일리 미팅 장소는 2층 산도르입니다. July 17, 2025 at 8:47 AM, 김주연 : @이연수 매니저님 Agv 할당로직 미팅 링크는 2513 520 5742 비밀번호 1234 입니다. 다임리서치 담당자분께 공유 부탁드립니다. 회의실은 2F sandor 입니다. @박태영 July 17, 2025 at 8:54 AM, 연해리 : @JAEYOON KIM / CS @강기훈 @최대운 매니저님 금일 AGV 배터리 교체 교육을 위해 필요한 자재는 저희가 현장에서 제공드릴 예정이며, 금일은 1EA만 신규품으로 교체 부탁드립니다. 추가로, 10:00-12:00에 고객 현장 방문이 예정되어 있어 그 전에 끝내기는 어렵더라도, 가능한 빠르게 마무리되면 좋을 것 같습니다. July 17, 2025 at 9:01 AM, 최대운 : @KIM SEYEON [김세연]_FA 고갹 방문 및 ACS 담당자 미팅 등으로 GF 노칭 음극 동선 변경은 오후에 진행 하도록 하겠습니다. July 17, 2025 at 9:30 AM, KIM SEYEON [김세연]_FA : 넵 July 17, 2025 at 11:37 AM, 최대운 : @조수형팀장 SKO/FA운영팀 @KIM SEYEON [김세연]_FA @김희래 금일 GF 노칭 음극 동선 개선 업데이트는 오후 1:30분에 진행하겠습니다. July 17, 2025 at 3:21 PM, 강기훈 : @김주연 @최태영 금일 진행한 GF VD 음극 CARGO STATUS ABNORMAL ERROR TEST 관련 완료 후 1대분에 대해서 업데이트된 프로그램 적용 후 명일 오전까지 돌려보고자 합니다 혹, 문제 샹겼을 시 해당 호기는 라인아웃 하는 것으로 부탁드립니다 참고내용 1. GF VD 음극 AGV#4 인터락 적용 및 프로그램 업데이트 완료 후 테스트 진행 시 특이사항 없음 2. 해당 호기 명일 음극 전호기 횡전개 전까지 생산투입 후 모니터링(CS지원 필요) 3. 어브노멀 케이스 및 에러 발생 시 해당호기 라인아웃 진행(CS지원 필요) 감사합니다. @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @배병민 (Bae Byoungmin) @JAEYOON KIM / CS @Lee Junghan(이정한)_CS July 17, 2025 at 3:33 PM, 최태영 : 1대분이 4호기라는 말씀이신가요? July 17, 2025 at 3:33 PM, 강기훈 : 네, 맞습니다 July 17, 2025 at 3:36 PM, 강기훈 : @배병민 (Bae Byoungmin) @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @JAEYOON KIM / CS @Lee Junghan(이정한)_CS 명일 오전 9시 30분에 1F NC 음극 17호기에 제공주신 WELCON SERVO DRIVE 교체 및 파라미터 셋팅작업 예정입니다 이후 에이지비 포크, 얼라인축 모터교체 시 필요한 사항이라 CS인원 및 테크니션 참관하여 교육하며 진행하면 좋을 것 같아 공유 드립니다 참고하시어 참석 부탁드립니다 July 17, 2025 at 3:37 PM, JAEYOON KIM / CS : 네 알겠습니다. CS팀 전달하여 인원 참석 할수 있게 하겠습니다. July 17, 2025 at 4:55 PM, 김주연 : @강기훈 매니저님 7/18 10:30~ 진행 가능하실까요? July 17, 2025 at 5:21 PM, 강기훈 : 네, 알겠습니다 July 18, 2025 at 8:08 AM July 18, 2025 at 8:08 AM, KIM SEYEON [김세연]_FA : @최대운 @지석범PM (이반차FA) 피엠님 노칭 다관절로봇 펜스 수정관련 현장미팅 금일 13시반 노칭 음극서 보겠습니다. July 18, 2025 at 8:54 AM, 김주연 : @Jun(정우준)_SKOH FA @지석범PM (이반차FA) @강기훈 금일 한국진공, 조립제조와 미팅은 오전 10시 조립동 회의실에서 진행합니다. (조립동캔틴앞) July 18, 2025 at 3:14 PM, 최태영 : 음극 노칭 에지비 충전기1번 근처에서 작업중인가요? July 18, 2025 at 3:25 PM, 최대운 : 최근 레이아웃변경해서 POS 에러 발생하여 점검 중입니디.

Chunk 1046:
March 11, 2025 at 11:47 AM, Sazzad Bhai SKon invited duzzaman Md (MCS).
March 11, 2025 at 11:58 AM, Mohammad Amir: @FA @Takács Ádám FA Tech Please check C1STKA71_C01 there is Light Curtain detected Error (SCS). Thank you very much!
March 11, 2025 at 12:00 PM, Mohammad Amir: @FA @Pintye Miklós FA. Please check C1STKC71_C02 there is Light Curtain detected Error (SCS). Thank you very much!

Chunk 1047:
March 11, 2025 at 12:02 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 163 Cathode: 113 Pre-STK> VD Anode: 00 Cathode: 12 Post-STK > stacking Anode: 245 Cathode: 240
March 11, 2025 at 12:04 PM, Pintye Miklós FA.: Solved
March 11, 2025 at 12:06 PM, Szücs Géza FT-B: I would like to request a step by step training for your Vietnamese colleagues about the proper use of the return system.
March 11, 2025 at 12:07 PM, Mohammad Amir: Thank you very much!

Chunk 1048:
March 11, 2025 at 12:07 PM, Dariimaa/다리마/Ivancsa: Please check C1STKA71_C01 there is Light Curtain detected Error (SCS). Thank you very much!
March 11, 2025 at 12:10 PM, Pintye Miklós FA.: Solved
March 11, 2025 at 12:38 PM, Mohammad Amir: @FA @Takács Ádám FA Tech Please check C1STKA71_C01 there is SCP safety Relay power trip error. Thank you very much!

Chunk 1049:
March 11, 2025 at 12:38 PM, Takács Ádám FA Tech: I would like to request a step by step training for your Vietnamese colleagues about the proper use of the return system.
March 11, 2025 at 12:46 PM, Ngoc zia: Vietnamese op they learned about how is the right work when take out & input mgz. But the time to input & take out is short. It is easy get alarm. Can u fix about the time?
March 11, 2025 at 1:07 PM, Csanálosi Gábor FA: Your question is forwarded to the vendor.

Chunk 1050:
March 11, 2025 at 1:08 PM, Ngoc zia: Thank you
March 11, 2025 at 1:21 PM, M.Ferenc "B"Nc/Vd SL: VD Ca Agv#10 stopped before #43 VD chamber. Please check it.
March 11, 2025 at 2:17 PM, Ngoc zia: @mcs/rtd 6-2 (#47) VD-Ca . Pls empty chamber manually with Agv & transport the mgz to STK#1 warehousing, pls. The door is open. Ready for agv . Thank you
March 11, 2025 at 2:23 PM, Mohammad Amir: @Dariimaa/다리마/Ivancsa Please empty the chamber and inform me after you will be completed. Thank you very much!

Chunk 1051:
March 11, 2025 at 2:25 PM, Dariimaa/다리마/Ivancsa: Okey
March 11, 2025 at 2:25 PM, Mohammad Amir: Thank you very much!
March 11, 2025 at 2:33 PM, Dariimaa/다리마/Ivancsa: Returned to STK chamber is empty Thank you!
March 11, 2025 at 2:34 PM, Mohammad Amir: Thank you very much for the confirmation!
March 11, 2025 at 2:57 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 190 Cathode: 148 Pre-STK> VD Anode: 01 Cathode: 00 Post-STK > stacking Anode: 228 Cathode: 243

Chunk 1052:
March 11, 2025 at 5:15 PM, Mohammad Amir: @FA @Takács Ádám FA Tech Please check C1CNV072(16012,16011) there is light curtain-01 error. Thank you very much!
March 11, 2025 at 5:15 PM, Szücs Géza FT-B: @Csanálosi Gábor FA plíz
March 11, 2025 at 5:16 PM, Csanálosi Gábor FA: Már úton
March 11, 2025 at 5:19 PM, Csanálosi Gábor FA: Korean technician is in the conv area, teaching agv
March 11, 2025 at 5:21 PM, Csanálosi Gábor FA: Solved
March 11, 2025 at 5:21 PM, Mohammad Amir: Thank you very much!

Chunk 1053:
March 11, 2025 at 5:54 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.11 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 1054:
March 11, 2025 at 6:18 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(1): Göltl Noémi

Chunk 1055:
March 11, 2025 at 8:54 PM, Shahbaz 샤바즈 MCS/RTD: @FA @Manufacturing Please LR again for VD An 5-5. Only half chamber is full. Thank you.
March 11, 2025 at 10:21 PM, Hồng Anh SL NC&VD 1F: Pls check Robot #2 AN NC. Detect seonsor off error.
March 11, 2025 at 10:42 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Cathode reel stk C51 “Travel driver error” Thanks
March 11, 2025 at 10:51 PM, Hồng Anh SL NC&VD 1F: Pls check for chamber #41(5-5) VD AN. Pls request AGV give more 2 plate for this chamber.

Chunk 1056:
March 11, 2025 at 10:51 PM, 인제(Hwang): NC An Robot#2 Error
March 11, 2025 at 10:53 PM, Zaya/ivancsa FA: AGV 9 on the way
March 11, 2025 at 11:23 PM, Hồng Anh SL NC&VD 1F: Can you pls request this agv take out and put in again pls. Plate wrong position.
March 11, 2025 at 11:48 PM, Zaya/ivancsa FA: Solved
March 12, 2025 at 1:00 AM, P.Bence A SSL: No full magazines arrive at the L6 stacking area, the Agv is very slow and the line slowly stops, what is the reason for this?

Chunk 1057:
March 12, 2025 at 1:03 AM, Shahbaz 샤바즈 MCS/RTD: AGV#06 is on the way to ST 6-4 and 4 jobs are waiting at conveyor ports.
March 12, 2025 at 1:08 AM, F.Péter A SL L10: There are few full Cathode plates on the line, please check.
March 12, 2025 at 1:25 AM, Böröcz Tamás: Ennyit tud
March 12, 2025 at 4:46 AM, F.Péter A SL L10: Line 5 stacking #8 Agv stop .. please check

Chunk 1058:
March 12, 2025 at 6:04 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.12 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen
March 12, 2025 at 6:20 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:12/13 Overtime (0): - Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Kiss Balázs, Szabadi Miklós, Oláh András Assembly(6): Zsurbej Zsolt, Nagy Zsolt Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 1059:
March 12, 2025 at 8:14 AM, Elena SL: Good morning all. Please check NC CA AGV #1 and robot
March 12, 2025 at 8:14 AM, Elena SL: @FA
March 12, 2025 at 8:16 AM, Shakir (MCS): @Dariimaa/다리마/Ivancsa Please check AGV01, T axis overload error. Thank you
March 12, 2025 at 8:18 AM, Elena SL: Done. ☑️ Thank you
March 12, 2025 at 9:36 AM, Shakir (MCS): @Kiss Balázs F.A. Please check roll stk CA, E0STKC33_C01 is OOS, there is Travel Exact Position Error. Thank you

Chunk 1060:
March 12, 2025 at 9:37 AM, Szabadi Miki: Checking
March 12, 2025 at 11:06 AM, Shakir (MCS): @FA Please check E0CNVC51(8218,9217) there is Abnormal status. Thank you very much!
March 12, 2025 at 11:07 AM, Shakir (MCS): *8217
March 12, 2025 at 11:07 AM, Kiss Balázs F.A.: Okey
March 12, 2025 at 11:12 AM, Kiss Balázs F.A.: Korean colleagues are working on it
March 12, 2025 at 11:12 AM, Shakir (MCS): Thank you for your information
March 12, 2025 at 1:26 PM, 김동섭: GF AN VD 6-4 AGV ERROR STOP

Chunk 1061:
March 12, 2025 at 1:28 PM, Elena SL: @FA Please check NC GF CA reels port. Pio tr off timer over error
March 12, 2025 at 1:34 PM, Novák Károly F. A.: Készen van.
March 12, 2025 at 1:35 PM, Elena SL: Thank you 🙏
March 12, 2025 at 1:42 PM, Shakir (MCS): @FA @Manufacturing Please press LR again for VD An 5-5, 6-3 and 6-8. Half chamber situation. Thank you.

Chunk 1062:
March 12, 2025 at 2:18 PM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 206 Cathode: 221 Pre-STK> VD Anode: 04 Cathode: 04 Post-STK > stacking Anode: 199 Cathode: 183
March 12, 2025 at 2:21 PM, Sazzad Bhai SKon: @FA C5VDA050_P01 there as a LR from this port at 09:43. But without any transport command it showed Load complete! This causes the half chamber. Please check the VD machine

Chunk 1063:
March 12, 2025 at 2:23 PM, Sazzad Bhai SKon: Same phenomenon for C6VDA080_P04 and C6VDA030_P03
March 12, 2025 at 3:09 PM, Shakir (MCS): @FA Please check E0CNVC52_BP02, there is INV-01 Run Time over error. Thank you very much!
March 12, 2025 at 3:27 PM, Shakir (MCS): @Manufacturing Please check C1CNV072_M01 ,there is 1+2 carriers waiting. Thank you very much!
March 12, 2025 at 3:31 PM, 김동섭: GF AN VD 6-3, 6-8 half chamber.

Chunk 1064:
March 12, 2025 at 3:44 PM, Shakir (MCS): Agv#06 on the way for VD AN 6-3, @Dariimaa/다리마/Ivancsa please check agv#06 error. Thank you
March 12, 2025 at 3:52 PM, Shakir (MCS): AGV#06 successfully transfer the carrier , now the 6-3 VD full ✅ Thank you
March 12, 2025 at 5:52 PM, Elena SL: @FA please check AGV #10. Nc GF AN
March 12, 2025 at 6:59 PM, T. Gàbornè C SL NC: Sziasztok GF CA #robot 1-nél az üres mgz-ok megbillentek, kérlek ellenörzèst. Köszönöm szépen.

Chunk 1065:
March 12, 2025 at 9:53 PM, T. Gàbornè C SL NC: @Fa Sziasztok NC CA 5#1 -gépnél kitöltéskor megborult egy Mgz-ni légyszíves gyertek ide. Köszönöm szépen.
March 12, 2025 at 10:30 PM, 지석범PM (이반차FA): Sziasztok Night shift FA Technician Schedule Date: 2025.03.12 Time: 18:00–06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 13, 2025 at 12:33 AM, T. Gàbornè C SL NC: @FA please check CA robot#3 CV-03 BCR position error Thanks
March 13, 2025 at 12:33 AM, Kertész Dániel: Megyünk

Chunk 1066:
March 13, 2025 at 2:54 AM, Viki - SL_C: @FA Sziasztok Megállt az 5-ös a L6 stacking belső oldalán. Nézzetek rá kérlek. Danke.
March 13, 2025 at 2:54 AM, Kertész Dániel: Megyünk
March 13, 2025 at 2:54 AM, Viki - SL_C: Köszi
March 13, 2025 at 3:29 AM, T. Gàbornè C SL NC: @FA please check AN robot#1, mgz plate position NG Detect sensor off error Robot error Thanks
March 13, 2025 at 3:30 AM, Simon Attila F. A.: Ok!

Chunk 1067:
March 13, 2025 at 4:47 AM, Karina: @fa Hello, please need help, AGV #10 take out full magazine with STK/5 line/20 machine
March 13, 2025 at 6:07 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.13 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen

Chunk 1068:
March 13, 2025 at 6:17 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:10/13 Overtime (0): - Sick (1):Nagy Zsolt Holiday (1): Kasztel Balázs Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): Zsurbej Zsolt, Novák Zoltán, Béki Norbert Hufnágel Dániel, Novák Károly Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 13, 2025 at 8:39 AM, 김동섭: GF AN VD 5-5 Lower right plate seating is poor. Please settle again with AGV

Chunk 1069:
March 13, 2025 at 1:40 PM, Ivan Kasian Sl 5L 🥹: Hello everyone @RTD. I manually unloaded the chamber #38 5.2 Са to warehouse 71, because chamber stopped with error.
March 13, 2025 at 1:41 PM, Sazzad Bhai SKon: Please sent to STK
March 13, 2025 at 1:41 PM, Sazzad Bhai SKon: * sent manually to Post VD STK
March 13, 2025 at 1:42 PM, Ivan Kasian Sl 5L 🥹: 71 already unload, this is a rework
March 13, 2025 at 1:42 PM, Ivan Kasian Sl 5L 🥹: It's late, sorry.

Chunk 1070:
March 13, 2025 at 1:43 PM, Ivan Kasian Sl 5L 🥹: Is there a problem if it is loaded on 72 and in 71?
March 13, 2025 at 1:43 PM, Ivan Kasian Sl 5L 🥹: If there is a difference, please explain that I understood it.
March 13, 2025 at 1:43 PM, Sazzad Bhai SKon: No problem. Please sent it to STK 72 manually.
March 13, 2025 at 1:44 PM, Sazzad Bhai SKon: If you want to store it in STK 71, you need to use manual port. Assuming that VD process has not done yet

Chunk 1071:
March 13, 2025 at 1:45 PM, Ivan Kasian Sl 5L 🥹: The VD process is not yet complete, that is why I chose warehouse 71.
March 13, 2025 at 1:46 PM, Sazzad Bhai SKon: Then please input from manual port of STK 71. Or sent to STK 72 by AGV manual command
March 13, 2025 at 1:49 PM, Ashley🖤💚✨: Hello. I would like to ask someone for help. top of line 6.

Chunk 1072:
March 13, 2025 at 1:49 PM, Ivan Kasian Sl 5L 🥹: As I was informed last time when I encountered this. The furnace stopped with an error, the technicians disconnect it from the power supply before unloading it with the help of the AGV, after that it is impossible to call the AGV. And since the process is not completed, I placed it manually in warehouse 71. And I informed you about it.
March 13, 2025 at 1:49 PM, Ivan Kasian Sl 5L 🥹: This message was deleted.

Chunk 1073:
March 13, 2025 at 1:57 PM, 김동섭: GF AN VD 6-4 Lower right plate seating is poor. Please settle again with AGV
March 13, 2025 at 2:43 PM, Ivan Kasian Sl 5L 🥹: @fa please check request to unload full mgz machine 6.1 nc cathode
March 13, 2025 at 2:46 PM, Sazzad Bhai SKon: UR received at 14:30 , job created. But AGV is in Alarm: light curtain detect error
March 13, 2025 at 2:51 PM, Shakir (MCS): Unload successfully ✅ Thank you

Chunk 1074:
March 13, 2025 at 2:57 PM, BekiNorbi: @Shakir (MCS) Hello, 60022_E0STKC52 has a stuck data. We checked the sensors and if there is something physically there, but it is completely empty and the sensors are good.
March 13, 2025 at 3:00 PM, Shakir (MCS): @FA Please check the unit : 60022_Stkc52, Data off error. Thank you
March 13, 2025 at 3:02 PM, BekiNorbi: Yes, we know, that's why we told you, because we have checked all the parts that belong to us about this error.

Chunk 1075:
March 13, 2025 at 3:03 PM, Shakir (MCS): Okay, Thank you for the information
March 13, 2025 at 5:23 PM, Ivan Kasian Sl 5L 🥹: @Sazzad Bhai SKon same situation with chamber #48 cathode 6.3
March 13, 2025 at 5:25 PM, Shakir (MCS): This message was deleted.
March 13, 2025 at 5:26 PM, Shakir (MCS): Could you please transfer magazines stk72 CA manually. Thank you
March 13, 2025 at 5:31 PM, Ivan Kasian Sl 5L 🥹: I tried, MCS Buzzer

Chunk 1076:
March 13, 2025 at 5:38 PM, Shakir (MCS): Could you please return it to Manual port of stk 71 CA. It is not possible to return it by manually (without using AGV). Thank you
March 13, 2025 at 5:39 PM, Ivan Kasian Sl 5L 🥹: Yes, that's what I do
March 13, 2025 at 5:40 PM, Shakir (MCS): Thank you
March 13, 2025 at 5:41 PM, Ivan Kasian Sl 5L 🥹: You too thank you
March 13, 2025 at 5:54 PM, Elena SL: @FA please check AGV#5 line 5 st13 MC

Chunk 1077:
March 13, 2025 at 6:11 PM, VK (mcs): @FA Please check Cathode reel STK C52 Load oversize error!
March 13, 2025 at 8:57 PM, Viki - SL_C: @FA Helloo Az 1-es AGV már az előbb is vitte egy kört a teli magazinos plate-et, nem állt be rendesen a station-höz, most megállt a 17-es stacking előtt. Nézzetek rá légyszi. Köszönöm.
March 13, 2025 at 8:59 PM, Viki - SL_C: Itt a kolléganő, köszi

Chunk 1078:
March 14, 2025 at 6:21 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 0Sl Overtime(0): - Holiday(0): - Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Pintye Miklós László --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pálosi Róbert, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 1079:
March 14, 2025 at 6:39 AM, Baek Hojong(백호종)FA: Sziasztok Daily shift FA Technician Schedule Date: 2025.03.14 Time: 06:00–18:00 1. Baek hojong Köszönöm szépen
March 14, 2025 at 7:28 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 165 Cathode: 179 Pre-STK> VD Anode: 03 Cathode: 02 Post-STK > stacking Anode: 234 Cathode: 210

Chunk 1080:
March 14, 2025 at 8:37 AM, Mohammad Amir: @Manufacturing Please check and remove MLA 0128 located at C1CNV02_M01 for this carrier stacking process is not completed for magazine MA1121,MA5199. Thank you very much!
March 14, 2025 at 8:44 AM, Ngoc zia: @rtd can u check VD Ca 5-8 (#44) pls. Only 2 plates on chamber & still wait around 1 hour . We need more 2 other plates make full chamber to start.
March 14, 2025 at 8:44 AM, Mohammad Amir: Checking!

Chunk 1081:
March 14, 2025 at 9:12 AM, Mohammad Amir: This message was deleted.
March 14, 2025 at 9:13 AM, Sazzad Bhai SKon: Currently there are no plates available to deliver.
March 14, 2025 at 9:50 AM, Csanálosi Gábor FA: @Amir(MCS/RTD) A51 Gf manual ports are in maintenance from now, a company here to maintain the fire curtains. I let you know when they finished.
March 14, 2025 at 9:50 AM, Mohammad Amir: Thank you very much for the information!

Chunk 1082:
March 14, 2025 at 9:56 AM, Sazzad Bhai SKon: Please vacant the chamber and raise LR again. We received initial LR at 2:51 and after that we see unload complete from P03, this is abnormal case.
March 14, 2025 at 10:06 AM, Sazzad Bhai SKon: @FA C5VDC080 process machine needs to investigate. It sent unload complete message twice that causes half chamber for a long time.
March 14, 2025 at 10:11 AM, Mohammad Amir: Job has created for remaining two chambers as well. ✅ Thank you very much!

Chunk 1083:
March 14, 2025 at 10:13 AM, Csanálosi Gábor FA: @Mohammad Amir now RTV CONV is in maint. For fire door test. Soon they finish, than CA side will come.
March 14, 2025 at 10:14 AM, Mohammad Amir: Thank you very much for the information!
March 14, 2025 at 10:16 AM, Ngoc zia: Thank you
March 14, 2025 at 10:16 AM, Mohammad Amir: You are welcome!
March 14, 2025 at 10:27 AM, Mohammad Amir: @Manufacturing Please check C1CNV072_M01 ,there is 1+1 carriers waiting. Thank you very much!

Chunk 1084:
March 14, 2025 at 10:38 AM, Csanálosi Gábor FA: Fire door check on anode side is completed, going to CA, so will some conv. Stops there.
March 14, 2025 at 11:04 AM, Radics András left this chatroom.
March 14, 2025 at 11:25 AM, Mohammad Amir: Are you working on E0STKC51 ? Please confirm! Thank you very much!
March 14, 2025 at 11:27 AM, Mohammad Amir: At E0STKC51_C02 there is Travel driver error. Please check this! Thank you very much!

Chunk 1085:
March 14, 2025 at 11:28 AM, Csanálosi Gábor FA: The fire door check is in progress on ca side
March 14, 2025 at 11:28 AM, Mohammad Amir: Thank you very much for the confirmation!
March 14, 2025 at 11:28 AM, Csanálosi Gábor FA: @Kovács Ágnes @Pálosi Róbert
March 14, 2025 at 11:30 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 162 Cathode: 178 Pre-STK> VD Anode: 02 Cathode: 02 Post-STK > stacking Anode: 243 Cathode: 227

Chunk 1086:
March 14, 2025 at 11:31 AM, Csanálosi Gábor FA: Solved
March 14, 2025 at 11:31 AM, Mohammad Amir: Thank you very much!
March 14, 2025 at 11:51 AM, Csanálosi Gábor FA: Fire door check is finished, all cv's are back online.
March 14, 2025 at 1:30 PM, Mohammad Amir: @Manufacturing Please check and remove MLA0070 from C1CNV072_M01 for this carrier,Magazine MA1144 is not closed. Thank you very much!

Chunk 1087:
March 14, 2025 at 3:15 PM, 김동섭: GF AN VD 6-3, 6-10 half chamber. 6-3 is too time-consuming. Please check.
March 14, 2025 at 3:15 PM, Mohammad Amir: Checking
March 14, 2025 at 3:23 PM, Mohammad Amir: @FA Please check for 6-3 and 6-10 CA VD Port P03 we received Load complete message even before job started . Please investigate this issue. @Manufacturing Please press LR for half chamber of 6-3 and 6-10 P03 and P04. Thank you very much!
March 14, 2025 at 3:34 PM, Ngoc zia: NC An line 6.1 #agv1 error

Chunk 1088:
March 14, 2025 at 3:35 PM, Ngoc zia: Can u check line 5 An Nc warehousing pls. Around 40min doesn’t supply reel
March 14, 2025 at 3:41 PM, Mohammad Amir: Checking
March 14, 2025 at 3:46 PM, Mohammad Amir: There are reels available for line 5 on the manual ports , please pick it. Thank you very much!

Chunk 1089:
March 14, 2025 at 3:50 PM, Mohammad Amir: @Takács Ádám FA Tech Please check why C1CNV072_16101~ 16028 is in Manual mode, because of it The CNV is OOS and stacking materials transfer supply is getting affected. Thank you very much!
March 14, 2025 at 4:01 PM, Baek Hojong(백호종)FA: Korean worker is checking the conveyor. It will be finished in 5 minutes.
March 14, 2025 at 4:02 PM, Mohammad Amir: Okay , Thank you very much Sir!

Chunk 1090:
March 14, 2025 at 4:05 PM, M.Ferenc "B"Nc/Vd SL: @Takács Ádám FA Tech @Böröczki Balázs Meg tudnátok nézni, katód 71-be tudunk-e üres magazint beküldeni?
March 14, 2025 at 4:07 PM, Takács Ádám FA Tech: Katód oldalon tudtok. Anódon még egy darabig nem
March 14, 2025 at 4:09 PM, M.Ferenc "B"Nc/Vd SL: Próbáljuk manuál portot, de nem indul befelé.
March 14, 2025 at 4:09 PM, Takács Ádám FA Tech: Megyek
March 14, 2025 at 4:09 PM, 김동섭: GF AN VD AGV NO.9 ERROR STOP

Chunk 1091:
March 14, 2025 at 4:10 PM, M.Ferenc "B"Nc/Vd SL: Samkoo kollega elindítottan
March 14, 2025 at 4:15 PM, Csanálosi Gábor FA: @M.Ferenc "B"Nc/Vd SL itt vagy gf assyn?
March 14, 2025 at 4:19 PM, M.Ferenc "B"Nc/Vd SL: Emeleten vagyok
March 14, 2025 at 4:19 PM, Csanálosi Gábor FA: Akkor mindegy
March 14, 2025 at 5:27 PM, Mohammad Amir: @Manufacturing Please check and remove C1CNV072_M01 ,there is 1+2 carriers waiting. Thank you very much!

Chunk 1092:
March 14, 2025 at 6:19 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Interpreter Overtime: 0 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 1093:
March 14, 2025 at 6:46 PM, 김지수PM(Gyuri)_FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.14 Time: 18:00–06:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen
March 14, 2025 at 7:58 PM, Hồng Anh SL NC&VD 1F: @FA team pls check for RTV port AN NC. Empty Tray LTA1459 stuck on the port, no come back to warehouse. Pls check
March 14, 2025 at 8:09 PM, Hồng Anh SL NC&VD 1F: Pls check for Chamber #45 AN VD. The plate wrong position. Pls check and request AGV take out and put in again.

Chunk 1094:
March 14, 2025 at 8:14 PM, 강진복 Kang Jinbok: NC Ca Robot #3 Please check the alarm stop.
March 14, 2025 at 9:09 PM, Hồng Anh SL NC&VD 1F: Pls check for AGV #7 in NC CA. AGV error now.
March 15, 2025 at 2:05 AM, VK (mcs): @FA Please check Cathode reel STK C51 buffer port 12 (60021) CV-driven time over!
March 15, 2025 at 3:35 AM, VK (mcs): @FA Please check Anode reel STKA 52 Buffer port 9 (70004) Track sensor detection abnormalities

Chunk 1095:
March 15, 2025 at 5:05 AM, VK (mcs): @FA This issue still not solved. Also please check Anode reel STK A51 port 3(6056) Run time over!
March 15, 2025 at 6:04 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check this issue it si blocking material recovery,E0STKA51_P03 and E0CNVA51_P01 these ports are OOS. Thank you!
March 15, 2025 at 6:05 AM, Mr.Miti (미티) FA: @Szücs Géza FT-B please. 😇
March 15, 2025 at 6:12 AM, Szücs Géza FT-B: @Szabadi Miki @Pálosi Róbert légyszives nézzetek rá

Chunk 1096:
March 15, 2025 at 6:12 AM, Szabadi Miki: Igen megyünk
March 15, 2025 at 6:16 AM, Mohammad Amir: @Szabadi Miki Please also check this issue as well it still exists. Thank you!
March 15, 2025 at 6:20 AM, Szabadi Miki: fixed, tray stuck
March 15, 2025 at 6:21 AM, Mohammad Amir: Thank you very much!
March 15, 2025 at 6:22 AM, Mohammad Amir: @FA @Pálosi Róbert Please check carrier LTA0521 located at E0STKA51_C02 it Is not moving for a long time , everything good from MCS side. Thank you very much!

Chunk 1097:
March 15, 2025 at 6:26 AM, Szabadi Miki: Fixed
March 15, 2025 at 6:27 AM, Szabadi Miki: It is working now
March 15, 2025 at 6:27 AM, Mohammad Amir: Thank you very much!
March 15, 2025 at 6:27 AM, Szabadi Miki: Very welcome
March 15, 2025 at 6:28 AM, Mohammad Amir: Could you please check again it still shows on the the crane and not moving ,it is on the crane since 1:55 AM. Thank you very much!
March 15, 2025 at 6:35 AM, Szabadi Miki: Checking

Chunk 1098:
March 15, 2025 at 6:36 AM, Mohammad Amir: @FA @Pálosi Róbert Please check C1CNV072_16_075 it is OOS and it blocking the stacking materials transfer and now there is lack of materials . Thank you very much!
March 15, 2025 at 6:38 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.15 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom 3. Baek hojong Köszönöm szépen

Chunk 1099:
March 15, 2025 at 6:38 AM, Kertész Dániel: @Pálosi Róbert is an electrode FA technician, but this error is at the assembly.
March 15, 2025 at 6:40 AM, Mohammad Amir: Thank you very much for the information! Please pass this error to your Assembly colleagues. There is lack of stacking materials,please fix it on priority. Thank you very much!

Chunk 1100:
March 15, 2025 at 6:41 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 0Sl Overtime(2): Kertész Kornél Dániel, Szabadi Miklós Holiday(1): Radics András Sick(1): Czeilinger Krisztián --------------- Electrode(2): Rácz Dániel, Szabadi Miklós --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Takarítás(2): Kertész kornél Dániel, Pálo

Chunk 1101:
March 15, 2025 at 6:41 AM, Szabadi Miki: the order can be deleted, the process is complete, the tray is now physically on shelf 0102201
March 15, 2025 at 6:42 AM, Mohammad Amir: Thank you very much for the confirmation. I am checking!
March 15, 2025 at 6:43 AM, Mohammad Amir: Job has been cancelled successfully ✅ Thank you very much!
March 15, 2025 at 6:43 AM, Bohdan: There is a problem with AGV#8 between Line 4 and Line 5 ST. Please check it.
March 15, 2025 at 6:43 AM, Szabadi Miki: Very welcome

Chunk 1102:
March 15, 2025 at 6:53 AM, Csanálosi Gábor FA: @Kertész Dániel @Szabadi Miki @Pálosi Róbert solved it, thx for the help.
March 15, 2025 at 6:54 AM, Mohammad Amir: Thank you very for all of you. Materials flow has been normalised for stacking. ✅
March 15, 2025 at 6:55 AM, Mohammad Amir: @Manufacturing Please check C1CNV072_M01 ,there is 1+2 carriers waiting, please remove it it will increase the stacking materials transfer speed. Thank you very much!

Chunk 1103:
March 15, 2025 at 8:22 AM, Ngoc zia: NC Ca line 5.2 #agv9 error
March 15, 2025 at 8:56 AM, Mohammad Amir: @FA @Csanálosi Gábor FA Please check E0CNVA52(7001) there is Data Mismatch Error. Thank you very much!
March 15, 2025 at 9:13 AM, Csanálosi Gábor FA: Solved
March 15, 2025 at 9:14 AM, Mohammad Amir: Thank you very much!

Chunk 1104:
March 15, 2025 at 9:33 AM, Mohammad Amir: @Manufacturing Please check C1CNV072_M01 ,there is 1+1 carriers waiting, please remove it it will increase the stacking materials transfer speed. Thank you very much!
March 15, 2025 at 9:58 AM, Szücs Géza FT-B: CNV072 : AGV vagy valaki belelóg 1-2 fényfüggönybe @Kovács Ágnes @Pintye Miklós FA. légyszves nézzétek meg
March 15, 2025 at 10:04 AM, Pintye Miklós FA.: Kèsz! NC CA OLDALON A TÖLTÖN LEVŐ AGV#4 SZERELIK.

Chunk 1105:
March 15, 2025 at 10:13 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 108 Cathode: 164 Pre-STK> VD Anode: 02 Cathode: 00 Post-STK > stacking Anode: 276 Cathode: 223
March 15, 2025 at 10:26 AM, Szücs Géza FT-B: STKC51 lehalt @Csanálosi Gábor FA légyszi megnézed? @Böröczki Balázs @Takács Ádám FA Tech lehet kell majd emeleti segítség, CVNC53-nál

Chunk 1106:
March 15, 2025 at 10:42 AM, Mohammad Amir: @Manufacturing Please check C1CNV072_M01 ,there is 1+2 carriers waiting, please remove it ,it will increase the stacking materials transfer speed. Thank you very much!
March 15, 2025 at 10:44 AM, Ngoc zia: @rtd VD An 5-5 (#41) right/bottom plate not seated. Pls take out mgz on right side chamber with Agv. Technical need check sensor of chamber. Tks

Chunk 1107:
March 15, 2025 at 10:44 AM, Mohammad Amir: 1 more carrier is waiting now ,now there are 1+3 carriers. Please remove these carriers. Thank you very much!
March 15, 2025 at 10:45 AM, Mohammad Amir: @ACS @Dariimaa/다리마/Ivancsa Please remove these carriers with AGVs and after please inform me as well. Thank you very much!
March 15, 2025 at 11:15 AM, Zaya/ivancsa FA: done
March 15, 2025 at 11:15 AM, Mohammad Amir: Thank you very much!

Chunk 1108:
March 15, 2025 at 12:06 PM, Mohammad Amir: @Manufacturing Please make E0CNVA52_M03 to OUT type so that one job can be completed,LTA1521 is in alternated State for a long time. Thank you very much!
March 15, 2025 at 1:01 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 116 Cathode: 172 Pre-STK> VD Anode: 00 Cathode: 02 Post-STK > stacking Anode: 258 Cathode: 214
March 15, 2025 at 1:12 PM, Csanálosi Gábor FA: Done

Chunk 1109:
March 15, 2025 at 1:12 PM, Mohammad Amir: Thank you very much!
March 15, 2025 at 1:18 PM, Csanálosi Gábor FA: Apparently LTA0293 is still at port, and cannot send in. Pls check it
March 15, 2025 at 1:19 PM, Mohammad Amir: Checking

Chunk 1110:
March 15, 2025 at 1:21 PM, Debreczeni Ármin: Sziasztok! Mr Shim kérése hogy az assy főbejárat és az elektróda felé lévő lépcsőházig bezárólag senki ne használja az útvonalat csak takarítás céljából. Az emeleten pedig ugyan ez érvényes a lépcsőházból kilépve az öltözőig. Köszönöm
March 15, 2025 at 1:26 PM, Mohammad Amir: The job was terminated by Operator at 13:15 ,it had destination E0STKA52_Z01 , that's why it is not moving. Please rackin again. Thank you very much!

Chunk 1111:
March 15, 2025 at 1:27 PM, Csanálosi Gábor FA: Yup, i did, and it is going finally
March 15, 2025 at 1:27 PM, Mohammad Amir: Thank you very much,now carrier is moving. ✅
March 15, 2025 at 1:29 PM, Mohammad Amir: Please also change E0CNVA52_M03 to OUT so that job for LTA1521 can be completed as well. Thank you very much!
March 15, 2025 at 1:30 PM, Csanálosi Gábor FA: Went to out automatically just after 0293 left
March 15, 2025 at 1:31 PM, Mohammad Amir: Thank you very much!

Chunk 1112:
March 15, 2025 at 1:31 PM, Csanálosi Gábor FA: Your very welcome!
March 15, 2025 at 1:31 PM, Mohammad Amir: Carrier LTA1521 has also started to move at 13:30. Thank you!
March 15, 2025 at 3:09 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 124 Cathode: 174 Pre-STK> VD Anode: 00 Cathode: 00 Post-STK > stacking Anode: 262 Cathode: 227
March 15, 2025 at 3:17 PM, Mohammad Amir: @FA Please press LR for Remaining half chamber of C5VDA030_P01 and P02. Thank you very much!

Chunk 1113:
March 15, 2025 at 3:20 PM, Szücs Géza FT-B: there is no FA. This manufacturing
March 15, 2025 at 3:20 PM, Mohammad Amir: Okay, Thank you very much!
March 15, 2025 at 3:21 PM, Mohammad Amir: @Manufacturing Please press LR for Remaining half chamber of C5VDA030_P01 and P02. Thank you very much!
March 15, 2025 at 4:05 PM, Mohammad Amir: @FA @Csanálosi Gábor FA Please check C1CNV072_16_144 there is Data Mismatch Error. Thank you very much!
March 15, 2025 at 4:14 PM, Csanálosi Gábor FA: Done

Chunk 1114:
March 15, 2025 at 4:14 PM, Mohammad Amir: Thank you very much!
March 15, 2025 at 4:58 PM, Mohammad Amir: @Csanálosi Gábor FA Please check C1CNV072_M02 there is BCR Read Fail error. Thank you!
March 15, 2025 at 4:58 PM, Csanálosi Gábor FA: Gone already
March 15, 2025 at 4:59 PM, Mohammad Amir: Thank you very much!
March 15, 2025 at 5:39 PM, Sz.Attila B SL L9: Hello!Line 6 Stacking #4 Agv stopped.Pls help

Chunk 1115:
March 15, 2025 at 6:05 PM, Kéri Ildikó Detty: @FA Sziasztok Nc Anod emeletre kellene segitség !MGZ Robothoz
March 15, 2025 at 6:05 PM, Mr.Miti (미티) FA: Uton

Chunk 1116:
March 15, 2025 at 6:05 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 0 Interpreter Overtime: 1 ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— Interpreter(0):

Chunk 1117:
March 15, 2025 at 6:18 PM, 김지수PM(Gyuri)_FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.15 Time: 18:00–06:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen
March 15, 2025 at 7:54 PM, Lee Geun Seok: This message was deleted.
March 15, 2025 at 10:02 PM, Hồng Anh SL NC&VD 1F: @FA team Pls check for 6/3 Ca outline stop workinv and AGV 7 stop on outline mc 6/3 too. Pls check.

Chunk 1118:
March 15, 2025 at 11:01 PM, Hồng Anh SL NC&VD 1F: Pls check for chamber #51(6-6) CA. This chamber finish long time but 2 plate still in chamber. Pls request AGV come and unloading.
March 16, 2025 at 12:18 AM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber #44(5-8) CA for take out 4 plate inside chamber. We need to runing test this chamber.
March 16, 2025 at 12:20 AM, Böröcz Tamás: Agvs on the way
March 16, 2025 at 12:23 AM, Böröcz Tamás: VD machine isn't in AGV mod

Chunk 1119:
March 16, 2025 at 12:25 AM, Hồng Anh SL NC&VD 1F: Sorry, i checked and machine is AGV mode now. And now AGV alarm. Can you come to check pls.
March 16, 2025 at 12:26 AM, Böröcz Tamás: Omw
March 16, 2025 at 12:59 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check anode reel STK A51 P03, The reels are not moving into the stocker from CNV A51, resulting in a long queue. Thanks.
March 16, 2025 at 1:47 AM, Hồng Anh SL NC&VD 1F: Pls come to check for AGV 1 NC CA. AGV error and stop in outline mc 5/2

Chunk 1120:
March 16, 2025 at 1:49 AM, Böröcz Tamás: Done
March 16, 2025 at 5:42 AM, Hồng Anh SL NC&VD 1F: Pls check for AGV 9 AN Nc. Now AGV stop on inline mc 6/1
March 16, 2025 at 5:58 AM, 라슬로 STK Trainer: Good morning! Line 6 stacking near machine 11/12 an agv is in error(#1). Could someone check it for me please? Thank you.

Chunk 1121:
March 16, 2025 at 6:20 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9+2/12 Tech, 0Sl Overtime(2): Nagy Zsolt, Zsurbej Zsolt Holiday(2): Radics András, Boromisza Zoltán Sick(1): Czeilinger Krisztián --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (4): Böröczki Balázs, Takács Ádám, Pintye Miklós László, Kovács Ágnes --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Takarítás(2): Nagy Zsolt, Zsurbej Zsolt A technikusok elosztása változhat az elvég

Chunk 1122:
March 16, 2025 at 6:35 AM, (Unknown): @FA Good Morning Please check C1STKC72_C02. It's OutOfService having "Travel First Movement Error" Thank you very much
March 16, 2025 at 6:38 AM, Kovács Ágnes: Solved
March 16, 2025 at 8:56 AM, 지석범PM (이반차FA): This message was deleted.
March 16, 2025 at 8:56 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.16 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen

Chunk 1123:
March 16, 2025 at 9:23 AM, Csanálosi Gábor FA: @(Unknown) can you pls reset the alarm from mcs on GF AN VD? no errors there.
March 16, 2025 at 10:11 AM, Csanálosi Gábor FA: @(Unknown) pls check LTA1703, doesnt go to stk. It has empty empty state, but scs shows like full
March 16, 2025 at 10:12 AM, (Unknown): Checking
March 16, 2025 at 10:17 AM, (Unknown): The transport job is created and StorageCarrierTransferReply is Success. From MCS side everything is okay

Chunk 1124:
March 16, 2025 at 10:49 AM, Csanálosi Gábor FA: I sent away the tray what was on the crane, now the crane is moving now, hope all will fine from now on.
March 16, 2025 at 10:53 AM, Rácz Dániel / FA: E0STKA52_C01 darut leállítjuk kb 10 percre. Burkolatot fogunk pótolni.
March 16, 2025 at 10:53 AM, Szücs Géza FT-B: elektródának is írd be légyszike, kösszike
March 16, 2025 at 11:03 AM, Rácz Dániel / FA: Végeztünk
March 16, 2025 at 12:06 PM, Ngoc zia: nc An 5.1 # agv 9 error

Chunk 1125:
March 16, 2025 at 5:54 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1126:
March 16, 2025 at 7:56 PM, Hồng Anh SL NC&VD 1F: Pls check for chamber #41 AN. Plate wrong position. Pls request AGV come to take out and put in again.
March 17, 2025 at 1:36 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Anode reel A52 RTV OOS Thank you.
March 17, 2025 at 3:53 AM, Hồng Anh SL NC&VD 1F: Pls request for AGV come to chamber #44(5-8) AN for take out 2 plate upper pls. We need too fix chamber heater.

Chunk 1127:
March 17, 2025 at 4:47 AM, Hồng Anh SL NC&VD 1F: @FA team Pls check for AN reel warehouse, long time we dont have new reel.
March 17, 2025 at 5:19 AM, Szabolcs: Done
March 17, 2025 at 5:42 AM, Eduard SL Shift A: Line 5 ST 3 stopped AGV 8
March 17, 2025 at 5:44 AM, 방혁 PM(Bang.Hyuk) FA: Solved
March 17, 2025 at 5:57 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Reel LTA0634 at E0STKA51_B12(70021). There is already a transfer command in SCS but It is not moving to E0STKA51_M04(6114) for a long time.

Chunk 1128:
March 17, 2025 at 6:58 AM, Farkas Tamàs invited Csuti Zoltán F.A.
March 17, 2025 at 8:03 AM, Shakir (MCS): @FA Please check E0CNVC051_08_004 INV runtime over error Thanks
March 17, 2025 at 8:03 AM, Simon Attila F. A.: I'm here.
March 17, 2025 at 8:09 AM, Simon Attila F. A.: Working.
March 17, 2025 at 8:37 AM, Karina: @fa Hello, AGV # stopped near STK 5 line /machine #8, please check. Thank you
March 17, 2025 at 8:37 AM, Karina: Sorry, AGV#5

Chunk 1129:
March 17, 2025 at 9:10 AM, 조승래 Martin invited 이성종(Lee Sungjong).
March 17, 2025 at 9:15 AM, Shakir (MCS): @FA Please check E0STKC52_B12, CV driven timeover Thanks
March 17, 2025 at 1:12 PM, Shakir (MCS): @ACS @Khaliun/Ivancsa FA There is only one carrier at 6-10 Chamber Anode, could you please send back to A72 post VD with AGVs and after please inform me as well. Thank you very much!

Chunk 1130:
March 17, 2025 at 1:29 PM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 131 Cathode: 108 Pre-STK> VD Anode: 15 Cathode: 3 Post-STK > stacking Anode: 237 Cathode: 180
March 17, 2025 at 3:14 PM, T. Gàbornè C SL NC: @MCS Please check AN VD the machine is empty. The #71 warehouse 23 plates in stock. VD AN 5_01 VD AN 5_08 VD AN 5_07 VD AN 6_03 Thank you for much.
March 17, 2025 at 3:18 PM, Shakir (MCS): In MCS VD 5-8 is OOS VD 5-7 is Full

Chunk 1131:
March 17, 2025 at 3:25 PM, Shakir (MCS): For VD 5-1 and 6-3 only received LR for Half chamber. Thank you
March 17, 2025 at 3:48 PM, Shakir (MCS): Now the Job has been initiated for VD 5-1 and 6-3 carriers on the way. ✅ Thank you
March 17, 2025 at 3:49 PM, T. Gàbornè C SL NC: Thank you for information!
March 17, 2025 at 4:13 PM, Shakir (MCS): @FA Please check E0CNVA51_P11 there is a Data loss error. Thank you
March 17, 2025 at 4:14 PM, Shakir (MCS): Issue has been resolved ✅ Thank you

Chunk 1132:
March 17, 2025 at 6:13 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.17 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen

Chunk 1133:
March 17, 2025 at 6:17 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:13/13+1 SL Overtime (1): Denkó János Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Denkó János, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor
March 17, 2025 at 6:33 PM, Ivan Chobitko: @fa Good evening L5 ST#8 AGV#5 stuck Please check

Chunk 1134:
March 17, 2025 at 7:58 PM, Ivan Kasian Sl 5L 🥹 invited Yulya Kirsanova.
March 17, 2025 at 8:36 PM, Zulaa/졸라/Ivancsa FA: MCS@ Pl check. Vd anode chamber 6-8 (MLA0117), 5-3(MLA0215) Thank you.
March 17, 2025 at 8:53 PM, VK (mcs): VD 6/8 UR received at 16:24:14 But carrier id in port 3 is missed.and then machine state changed. Please UR again for port 3 VD 5/3 UR received at 16:44:19 But reply for port 1 is carrier id is null. Please also UR again

Chunk 1135:
March 17, 2025 at 8:59 PM, Zsolt F.A.: 1. Error keletlezési idő: 20:09 2. Folyamat, gép : GF NC CA E0STKC52_B07/04 3. Error állapot: TRACK sensor detection abnormal, casue of the problem unknown please investigate if the fork/port is in sync 4. Kérvényezett részleg : F.A. Unit 5. Munkálatok befejezés: - 6. Munkálatok folyamata: tray manual adjustment
March 17, 2025 at 9:22 PM, VK (mcs): Can you please request unloading again for VD 5/3 port 1

Chunk 1136:
March 17, 2025 at 9:54 PM, VK (mcs): Also VD 6/8 port 3 has same issue MES MCS set position request !
March 17, 2025 at 9:56 PM, Simon Dávid D SL NC: @FA Halo GF VD #53-as kemencébe csak 1 plate magazint hozott az AGV megnéznétek miért,köszönöm
March 17, 2025 at 10:46 PM, Simon Dávid D SL NC: @FA NC AN #7 AGV megált,megnéznétek köszönöm
March 17, 2025 at 11:13 PM, Simon Dávid D SL NC: @FA halo GF VD CA#41 kemencében fütőszállat kell cserélni kérem AGV segítségével pakolják ki a kemencét ,köszönöm

Chunk 1137:
March 17, 2025 at 11:21 PM, Denkó Jani (F.A.): Jelenleg a #41 es kemence az zárt állapotban van Egy vietnami kolléga szeretné kinyitni nagyon serényen,de nem sikerül neki 🙄😅
March 17, 2025 at 11:26 PM, Simon Dávid D SL NC: Megyek
March 18, 2025 at 12:27 AM, VK (mcs): @FA Please check Anode reel STK A51 LTA1621 order status is crane unloading for a while!
March 18, 2025 at 12:29 AM, VK (mcs): Carrier aborted by storage at 21:39 Due to MCP AP error!

Chunk 1138:
March 18, 2025 at 3:22 AM, VK (mcs): @FA Please check Anode reel STK A51 and 52
March 18, 2025 at 4:22 AM, Ivan Kasian Sl 5L 🥹: Good morning everyone @fa check please agv#7 near stack 5.18. Thank you so much
March 18, 2025 at 6:10 AM, 지석범PM (이반차FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.18 Time: 06:00–18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 18, 2025 at 8:54 AM, 김동섭: GF AN 6-3 chamber is empty

Chunk 1139:
March 18, 2025 at 8:57 AM, Sazzad Bhai SKon: Please first check AGV VC01 status: Fork1 LD/UD ReQ not received
March 18, 2025 at 8:59 AM, (Unknown): There is a Load Request from chamber. LR says not material available. Please also check Port 3, MLA1142 carrier is still there because AGV VC01 is in Alarm
March 18, 2025 at 9:12 AM, Sazzad Bhai SKon: @ACS C0VGA01 control state is OFFLINE. Disconnected. Jobs are alternated because of this. Please check. Thank you

Chunk 1140:
March 18, 2025 at 9:17 AM, 상진: Are you connected now?
March 18, 2025 at 9:17 AM, Sazzad Bhai SKon: No
March 18, 2025 at 9:23 AM, 상진: solved
March 18, 2025 at 9:23 AM, Sazzad Bhai SKon: Thank you, connected now
March 18, 2025 at 10:41 AM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 121 Cathode: 205 Pre-STK> VD Anode: 12 Cathode: 1 Post-STK > stacking Anode: 238 Cathode: 192
March 18, 2025 at 10:42 AM, JAEYOON KIM / CS: @FA GF VD AN AGV#6 check plz

Chunk 1141:
March 18, 2025 at 11:36 AM, 김형주: Please check AGV 7 on line 10
March 18, 2025 at 11:43 AM, Simon Attila F. A.: Where exactly is this? I don't see any mistake.
March 18, 2025 at 11:46 AM, 김형주: I wrote it wrong, it was the problem upstairs
March 18, 2025 at 11:46 AM, Simon Attila F. A.: I see now! Thank you.
March 18, 2025 at 12:29 PM, JAEYOON KIM / CS: @FA GF VD AN AGV#4 check plz

Chunk 1142:
March 18, 2025 at 2:45 PM, (Unknown): @FA LTC0081 job is Alternated because destination machine C5NCC030 doesn't accept process type. Carrier process type is reel tray. Destination machine process type is Plate Please check Thank you very much
March 18, 2025 at 2:55 PM, (Unknown): Currently there are multiple jobs Alternated for NC CA line 5, 6. MCS transport job description says "Destination machine NC CA 5-6 line Does not accept process type.
March 18, 2025 at 3:23 PM, 강기훈 invited 박의승.

Chunk 1143:
March 18, 2025 at 3:23 PM, 강기훈: This message was deleted.
March 18, 2025 at 5:36 PM, (Unknown): @FA these jobs are still Alternated.
March 18, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13+1 Overtime Overtime (1): Böröcz Tamás Sick (0):- Holiday (1): Kasztel Balázs Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Nagy Zsolt, Böröcz Tamás 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Magyar Balázs, Martina Dávid, Nagy Gábor

Chunk 1144:
March 18, 2025 at 6:12 PM, Elena SL: Hello all. Please check AGV#1 wrong position NC AN thank you @FA
March 18, 2025 at 6:24 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.18 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 18, 2025 at 10:40 PM, Elena SL: @Fa hello please come NC GF AN 6line check plz AGV #6
March 18, 2025 at 10:43 PM, Elena SL: ❗️❗️❗️❗️
March 18, 2025 at 10:45 PM, Elena SL: blocks the movement of others AGV

Chunk 1145:
March 18, 2025 at 10:49 PM, Péti Gábor: @Dániel Hufnágel
March 18, 2025 at 10:56 PM, Novák Károly F. A.: Solved
March 18, 2025 at 10:57 PM, Elena SL: Good job 👏
March 18, 2025 at 11:19 PM, Yulya Kirsanova: Agv#5 stopped with error near pine staking 5.8 Please check @fa Thank you so much.
March 18, 2025 at 11:53 PM, N. Attila SL: Hello Line 6 Stacking , AGV#2 machine stopped. Pls help me, thank you.

Chunk 1146:
March 18, 2025 at 11:57 PM, N. Attila SL: The problem is important, all AGVs stopped because of AGV #2. Stopped.
March 19, 2025 at 2:25 AM, Yulya Kirsanova: Hello. Agv#2 stopped with error near pine Staсking Line 6/20 Please check @fa Thank you so much.
March 19, 2025 at 2:27 AM, Böröcz Tamás: Please put the magazines right place in the plate because it causes error. Thank you for understanding.

Chunk 1147:
March 19, 2025 at 2:30 AM, N. Attila SL: Az előbb is a #2 géppel volt probléma, nem volt nála már alapanyag és a station mellett állt meg kB 1 méterre... Ahogy láttam mozgást jelölő sávon belül volt a gép. Lehet ,hogy a probléma oka más ?
March 19, 2025 at 2:32 AM, Böröcz Tamás: Akkor valami anomália volt. Közel érzékelt magához valamit és emiatt idő túllépés miatt kiállt hibára. Most az egyik magazin volt rossz helyen és érzékelte hogy nem megfelelő pozícióban van.

Chunk 1148:
March 19, 2025 at 2:32 AM, N. Attila SL: Rendben , köszi a választ.
March 19, 2025 at 2:36 AM, N. Attila SL: Line 6 Stacking AGV#3 stopped. Pls help me.
March 19, 2025 at 2:50 AM, Elena SL: @fa please check CA VD #42 5-6 AGV don’t take a finish material. Thank you
March 19, 2025 at 2:52 AM, Böröcz Tamás: Agvs on the way
March 19, 2025 at 2:52 AM, Elena SL: Goood thanks
March 19, 2025 at 3:09 AM, Elena SL: @FA please check the robot #2 C0PCA020. unknown error alarm

Chunk 1149:
March 19, 2025 at 3:09 AM, Elena SL: An
March 19, 2025 at 3:30 AM, Dániel Hufnágel: Please give a little patient, we operate with low membership

Chunk 1150:
March 19, 2025 at 6:08 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 9/11 Tech, 1Sl Overtime(0): Holiday(2): Pintye Miklós László, Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Denkó János --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(2): Gerbovits Kevin, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 1151:
March 19, 2025 at 7:45 AM, 김희용 invited 동현.
March 19, 2025 at 7:45 AM, 김희용: .
March 19, 2025 at 8:53 AM, M.Ferenc "B"Nc/Vd SL: Notching (AN ) Robot #2 error
March 19, 2025 at 9:02 AM, M.Ferenc "B"Nc/Vd SL: Please check it. The magazine tray is located abnormally on the conveyor.
March 19, 2025 at 9:06 AM, Takács Ádám FA Tech: @Denkó Jani (F.A.)
March 19, 2025 at 9:08 AM, Denkó Jani (F.A.): Solved sír
March 19, 2025 at 9:09 AM, Denkó Jani (F.A.): Amúgy lajkoltam az üzit, tehát vettem 🫡😘😘

Chunk 1152:
March 19, 2025 at 11:03 AM, Mohammad Amir: @FA @Denkó Jani (F.A.) Please can E0CNVA52 _7050 RTV there is CV Try Position Abnormal Error. It is blocking reels delivery. Thank you!
March 19, 2025 at 11:18 AM, Dariimaa/다리마/Ivancsa: Solved
March 19, 2025 at 11:18 AM, Mohammad Amir: Thank you very much!
March 19, 2025 at 1:28 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 47 Cathode: 234 Pre-STK> VD Anode: 3 Cathode: 0 Post-STK > stacking Anode: 331 Cathode: 153

Chunk 1153:
March 19, 2025 at 3:53 PM, Mohammad Amir: @Dariimaa/다리마/Ivancsa Please transfer MLA4085 located at C6VDA040_P03 manually to the STK as during unload carrier id was reported NULL. Thank you very much!
March 19, 2025 at 4:24 PM, Rácz Dániel / FA: @Mohammad Amir C1STKA71 MLA3052 P17 MLA4168 P18 Please check this, because not transport to VD machines. Thank you.
March 19, 2025 at 4:25 PM, Mohammad Amir: Checking

Chunk 1154:
March 19, 2025 at 4:32 PM, Mohammad Amir: Please confirm at C1STKA71_P18 which carrier actually located:- MLA4168 located or MLA0210 located ? Thank you!
March 19, 2025 at 4:50 PM, Rácz Dániel / FA: MLA2010 yes
March 19, 2025 at 4:51 PM, Mohammad Amir: Thank you for the confirmation!
March 19, 2025 at 4:58 PM, Mohammad Amir: Issue has been resolved ✅ Carriers has started to move. Thank you!
March 19, 2025 at 5:02 PM, Mohammad Amir: AGV#4 has been assigned to do the task. ✅ Thank you!

Chunk 1155:
March 19, 2025 at 6:12 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(7): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás

Chunk 1156:
March 19, 2025 at 6:21 PM, Shahbaz 샤바즈 MCS/RTD: @FA @Manufacturing VD An 5-3 half chamber is full. Please LR for other half. Thank you.
March 19, 2025 at 6:45 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.19 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 19, 2025 at 7:59 PM, Hồng Anh SL NC&VD 1F: Pls check for AGV 1 CA NC. Now AGV stop on the way.

Chunk 1157:
March 19, 2025 at 8:03 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 43(5-7) CA Vd for take out all plate. We need running test this chamber.
March 19, 2025 at 8:04 PM, Böröcz Tamás: Agvs on the way
March 19, 2025 at 8:19 PM, Hồng Anh SL NC&VD 1F: Hello, pls come to check for AGV. AGV cannot take out plate.
March 19, 2025 at 8:20 PM, Böröcz Tamás: Need a request from the machine
March 19, 2025 at 8:20 PM, Böröcz Tamás: Our machine have no problem

Chunk 1158:
March 19, 2025 at 8:22 PM, Hồng Anh SL NC&VD 1F: Chamber is auto mode and agv mode now.
March 19, 2025 at 8:28 PM, Böröcz Tamás: I understand
March 19, 2025 at 8:28 PM, Böröcz Tamás: But I can say exactly the same
March 19, 2025 at 8:29 PM, Böröcz Tamás: It's your machine's problem
March 19, 2025 at 8:29 PM, Böröcz Tamás: Agvs in auto mode
March 19, 2025 at 8:30 PM, Böröcz Tamás: Try to communicate
March 19, 2025 at 8:30 PM, Böröcz Tamás: But unloading request not received

Chunk 1159:
March 19, 2025 at 8:32 PM, Hồng Anh SL NC&VD 1F: Ok TC will come to check now
March 19, 2025 at 8:32 PM, Böröcz Tamás: They cannot solve
March 19, 2025 at 8:32 PM, Böröcz Tamás: It's vendor's responsibility
March 19, 2025 at 8:35 PM, Hồng Anh SL NC&VD 1F: Ok i see. Pls move AGV and keep chamber therể first.
March 19, 2025 at 8:35 PM, Böröcz Tamás: @Khaliun/Ivancsa FA was there

Chunk 1160:
March 19, 2025 at 8:52 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 37(5-1) AN Vd for take out all plate. We need running test this chamber.
March 19, 2025 at 9:08 PM, Hồng Anh SL NC&VD 1F: Pls one more time request AGV come and take out.
March 19, 2025 at 9:08 PM, Hồng Anh SL NC&VD 1F: We open the door done
March 19, 2025 at 9:08 PM, Ynja/ivancsa FA: okey
March 19, 2025 at 9:17 PM, Ynja/ivancsa FA: Transported to the warehouse, now it is empty.

Chunk 1161:
March 19, 2025 at 9:17 PM, Hồng Anh SL NC&VD 1F: Yes thank you.

Chunk 1162:
March 20, 2025 at 6:24 AM, Szücs Géza FT-B: Jó reggelt! Good morning! "B" műszak, 10/11 Tech, 1Sl Overtime(0): Holiday(1): Böröczki Balázs Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Czeilinger Krisztián --------------- Assy GF (2): Kovács Ágnes, Pintye Miklós László --------------- Assy 1F (2): Takács Ádám, Csanálosi Gábor --------------- Formation/Modul(3): Gerbovits Kevin, Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében

Chunk 1163:
March 20, 2025 at 7:43 AM, Mohammad Amir: @Kovács Ágnes Please check C1STKA71_C01 /C02 there is Light Curtain detected Error(SCS). Thank you!
March 20, 2025 at 7:44 AM, Szücs Géza FT-B: @Pintye Miklós FA. légyszives
March 20, 2025 at 7:55 AM, Pintye Miklós FA.: Solved
March 20, 2025 at 7:55 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 7:55 AM, Pintye Miklós FA.: Solved
March 20, 2025 at 8:00 AM, Pintye Miklós FA.: STKA71 -nàl Manuàlis bepalolàs van azèrt van àltalàban hiba .

Chunk 1164:
March 20, 2025 at 9:24 AM, Ngoc zia: @fa 6.1 the issue come back on outside. Can u check pls
March 20, 2025 at 9:24 AM, Ngoc zia: Ca Nc
March 20, 2025 at 9:28 AM, Mohammad Amir: @Manufacturing @Dmytro Poluekto Please check C1CNV072_M01 ,there is 1+2 carriers waiting, please remove it ,it will increase the stacking materials transfer speed. Thank you very much!
March 20, 2025 at 9:29 AM, Debreczeni Ármin: Today @Bohdan. Dyma is not here

Chunk 1165:
March 20, 2025 at 9:29 AM, Mohammad Amir: Okay thank you very much!
March 20, 2025 at 9:29 AM, Mohammad Amir: @Bohdan please check this . Thank you very much!
March 20, 2025 at 9:29 AM, Pintye Miklós FA.: Solved
March 20, 2025 at 9:30 AM, Bohdan: In progress
March 20, 2025 at 9:30 AM, Mohammad Amir: Okay, Thank you very much!
March 20, 2025 at 9:31 AM, Ngoc zia: #agv 9 error 6.1Ca
March 20, 2025 at 10:31 AM, 김동섭: GF AN VD 6-3 half chamber.
March 20, 2025 at 10:32 AM, Mohammad Amir: Checking

Chunk 1166:
March 20, 2025 at 10:35 AM, Mohammad Amir: @Manufacturing Please press LR for P03 and P04 of AN VD 6-3 ,there is half chamber situation. Thank you!
March 20, 2025 at 11:18 AM, 김동섭: This message was deleted.
March 20, 2025 at 11:19 AM, 김동섭: GF AN VD 5-2 half chamber state
March 20, 2025 at 11:19 AM, Mohammad Amir: Checking
March 20, 2025 at 11:22 AM, duzzaman Md (MCS): @Manufacturing Please press LR for P01 and P02 of AN VD 5-2 ,there is half chamber situation. Thank you!

Chunk 1167:
March 20, 2025 at 11:25 AM, Mohammad Amir: @Bohdan Please check this issue. Thank you very much!
March 20, 2025 at 11:26 AM, Bohdan: @Ngoc zia can you check pls ? Thank you
March 20, 2025 at 11:26 AM, Mohammad Amir: Thank you very much!
March 20, 2025 at 11:29 AM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 27 Cathode: 234 Pre-STK> VD Anode: 1 Cathode: 1 Post-STK > stacking Anode: 367 Cathode: 169

Chunk 1168:
March 20, 2025 at 11:33 AM, Ngoc zia: NC An #robot 2 plate sensor error
March 20, 2025 at 11:37 AM, Pintye Miklós FA.: Solved
March 20, 2025 at 11:41 AM, Mohammad Amir: @Ngoc zia Please press LR for P01 and 02 VD AN 5-3 ,there is half chamber situation. Thank you very much!
March 20, 2025 at 11:44 AM, Ngoc zia: NC An E0STKA71 port interface error
March 20, 2025 at 12:39 PM, Ngoc zia: @rtd can u check line 5 warehousing pls. near 2 hours doesn’t provide reel

Chunk 1169:
March 20, 2025 at 12:39 PM, Mohammad Amir: Checking
March 20, 2025 at 12:40 PM, Mohammad Amir: It is Anode ,right ?
March 20, 2025 at 12:40 PM, Ngoc zia: Yes on Anode side
March 20, 2025 at 12:40 PM, Mohammad Amir: Thank you very much!
March 20, 2025 at 12:42 PM, Mohammad Amir: Reels on the way ✅. Thank you very much!
March 20, 2025 at 12:42 PM, Ngoc zia: Thank you
March 20, 2025 at 12:42 PM, Mohammad Amir: You are welcome! Please collect reels from Manual ports.

Chunk 1170:
March 20, 2025 at 12:45 PM, Ngoc zia: Yes we will.
March 20, 2025 at 12:45 PM, Mohammad Amir: There are currently 219 reels available. Thank you!
March 20, 2025 at 12:45 PM, Mohammad Amir: Thank you very much!
March 20, 2025 at 12:46 PM, Ngoc zia: Great!
March 20, 2025 at 12:46 PM, Mohammad Amir: Thank you!
March 20, 2025 at 2:54 PM, 김동섭: GF AN VD 6-4 Unit Unit 6-4 is defective in seating of the lower right plate. Please restock with AGV.
March 20, 2025 at 3:03 PM, Ngoc zia: NC Ca #robot 3 errror

Chunk 1171:
March 20, 2025 at 3:07 PM, Mohammad Amir: @FA @Csanálosi Gábor FA Please check C1STKA72_C02 there is TRAVEL DB TEMPERATURE ERROR(X029). Thank you!
March 20, 2025 at 3:09 PM, Ngoc zia: NC An 6.2 #agv10 error
March 20, 2025 at 3:13 PM, Kovács Ágnes: Solved
March 20, 2025 at 3:17 PM, Takács Ádám FA Tech: Korean technicians working at warehouse C1STKA72
March 20, 2025 at 3:20 PM, Mohammad Amir: Thank you very much!

Chunk 1172:
March 20, 2025 at 3:24 PM, Pintye Miklós FA.: C1STKA72 TRAVEL DYNAMIC BRAKE TEMP ERROR.
March 20, 2025 at 3:29 PM, Pintye Miklós FA.: Korean technician takes on the places on it.
March 20, 2025 at 3:59 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 08 Cathode: 230 Pre-STK> VD Anode: 07 Cathode:00 Post-STK > stacking Anode: 00(C2STKA72 is OOS) Cathode: 164

Chunk 1173:
March 20, 2025 at 4:26 PM, Mohammad Amir: There is still korean worker working on C1STKA72 ? Cause there is a lack of Anode stacking Materials. Thank you!
March 20, 2025 at 4:28 PM, 김동섭: GF AN VD 6-6 Half Chamber. Please check.
March 20, 2025 at 4:29 PM, Mohammad Amir: Checking
March 20, 2025 at 4:31 PM, Mohammad Amir: @Bohdan Please raise LR for P03 and P04 of AN VD 6-6 there is half chamber situation. Thank you very much!

Chunk 1174:
March 20, 2025 at 4:32 PM, Pintye Miklós FA.: No one is working on it anymore, STKA72 flows.
March 20, 2025 at 4:32 PM, Bohdan: @Ngoc zia can u check pls ? Thank you
March 20, 2025 at 4:33 PM, Mohammad Amir: Please check it is still OOS and there is no Anode stacking materials available. Thank you!
March 20, 2025 at 4:33 PM, Mohammad Amir: Thank you very much!
March 20, 2025 at 4:33 PM, 김동섭: GF AN VD 6-6 raised LR again

Chunk 1175:
March 20, 2025 at 4:34 PM, Mohammad Amir: LR received successfully at 16:32. There is no material available currently as soon as material will be available job will be created. Thank you very much!
March 20, 2025 at 4:37 PM, Mohammad Amir: @FA @Csanálosi Gábor FA Please check this issue on priority there is no Anode stacking materials. Thank you very much!

Chunk 1176:
March 20, 2025 at 4:44 PM, Mohammad Amir: @FA @Pintye Miklós FA. Please check C1CNV072_16_128 it is OOS and it is blocking materials delivery. Thank you!
March 20, 2025 at 4:46 PM, Pintye Miklós FA.: Solved
March 20, 2025 at 4:46 PM, Mohammad Amir: Thank you very much!
March 20, 2025 at 4:49 PM, Mohammad Amir: @FA @Pintye Miklós FA. Please check MLA4129 located at C1CNV072_16_169 it is not moving and blocking all the materials,there is a queue of materials. Thank you very much!

Chunk 1177:
March 20, 2025 at 4:50 PM, Pintye Miklós FA.: Cheking
March 20, 2025 at 5:21 PM, Pintye Miklós FA.: Solved
March 20, 2025 at 5:23 PM, Mohammad Amir: Thank you very much!

Chunk 1178:
March 20, 2025 at 6:11 PM, Mr.Miti (미티) FA: Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 0 Interpreter Overtime: 0 ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás

Chunk 1179:
March 20, 2025 at 6:12 PM, P.Bence A SSL: L5-6 stacking There are a lot of empty magazines, full magazines are not arriving, can I ask for the exact reason for the error?
March 20, 2025 at 6:17 PM, P.Bence A SSL: L6 stacking left side Agv 6 stop please check thank you !
March 20, 2025 at 6:18 PM, Khaliun/Ivancsa FA: Solved
March 20, 2025 at 6:19 PM, Shahbaz 샤바즈 MCS/RTD: Currently, job creation is normal, and materials are being transferred.

Chunk 1180:
March 20, 2025 at 6:25 PM, P.Bence A SSL: Sziasztok fent akadt egy magazin stacking M02 portnal .
March 20, 2025 at 6:27 PM, Baek Hojong(백호종)FA: Sziasztok Night shift FA Technician Schedule Date: 2025.03.20 Time: 18:00–06:00 1. Baek hojong Köszönöm szépen
March 20, 2025 at 8:43 PM, Böröcz Tamás: If the notching port were in auto mod the efficiency of the AGV would increase. Please not just confirm error also start the machine. Thank you for understanding.

Chunk 1181:
March 20, 2025 at 8:44 PM, Böröcz Tamás: It also increases your machine's efficiency if there are magazines
March 21, 2025 at 12:10 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Cathode reel stockers, cranes C02 of both are OOS. Thanks
March 21, 2025 at 1:18 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Cathode reel STK C52 Load oversize error! Thanks
March 21, 2025 at 1:20 AM, Hồng Anh SL NC&VD 1F: Hello, pls check for reel warehouse AN GF. Long time we dont have new reel

Chunk 1182:
March 21, 2025 at 1:23 AM, Shahbaz 샤바즈 MCS/RTD: @FA Please check reel CNV A52 track 7052 “INV runtime over error” Thanks
March 21, 2025 at 1:44 AM, Baek Hojong(백호종)FA: Solved
March 21, 2025 at 2:08 AM, P.Bence A SSL: Anode VD warehouse 196 MCP AP error alarm please check nc-VD warehouse
March 21, 2025 at 2:12 AM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 51(6-6) VD CA for take out and put in plate again. Plate is wrong pisition now.
March 21, 2025 at 2:13 AM, P.Bence A SSL: Sorry 1F

Chunk 1183:
March 21, 2025 at 2:26 AM, Ynja/ivancsa FA: solved
March 21, 2025 at 4:28 AM, Hồng Anh SL NC&VD 1F: Pls request AGV come to 54(6-9) VD AN chamber for take out all of plate inside. We change heater and now need to running test.
March 21, 2025 at 4:31 AM, Böröcz Tamás: Please request vendor to solve the problem
March 21, 2025 at 4:32 AM, Böröcz Tamás: Because it's boring that all the time we have to send manually and when it's arrived the AGV didn't get LD/UD request from the machine

Chunk 1184:
March 21, 2025 at 4:48 AM, 이한웅(삼구): Please check NC An #2 Robot
March 21, 2025 at 5:06 AM, Hồng Anh SL NC&VD 1F: With this problem chamber will no request. Just pls let AGV come and manual operation AGV take out plate pls
March 21, 2025 at 5:19 AM, Khaliun/Ivancsa FA: Solved
March 21, 2025 at 5:25 AM, Hồng Anh SL NC&VD 1F: Thank you!
March 21, 2025 at 6:14 AM, 김지수PM(Gyuri)_FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time: 06:00–18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen

Chunk 1185:
March 21, 2025 at 6:29 AM, Yaroslav SL/C 6 line: Good morning everyone @fa ST 6 line Anode station near machine #19 The button to call the material does not work. Please check it. Thanks
March 21, 2025 at 7:08 AM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 12 Cathode: 236 Pre-STK> VD Anode: 8 Cathode: 1 Post-STK > stacking Anode: 361 Cathode: 153
March 21, 2025 at 8:43 AM, duzzaman Md (MCS): @FA Please check E0STKC52_B08, CV driven timeover Thanks

Chunk 1186:
March 21, 2025 at 9:05 AM, T. Gàbornè C SL NC: Please check AN Robot#1. The robot completion error. Thx
March 21, 2025 at 9:08 AM, Shakir (MCS): @FA Please Check carrier LTC0908 at E0STKC51 manual job created for Destination E0STKC51_P01 but Port type is IN . It will not execute because the Port type. Thank you
March 21, 2025 at 9:08 AM, Simon Attila F. A.: This message was deleted.
March 21, 2025 at 11:08 AM, 김동섭: AGV alarm in front of GF AN VD Unit 5-4

Chunk 1187:
March 21, 2025 at 12:49 PM, Shakir (MCS): @FA Please check Reel LTA1186 at E0STKA51_B09 (70003) . Job is alternated because there is Input H/S off. This carrier blocking others. Thank you
March 21, 2025 at 1:11 PM, Farkas Tamàs: Done
March 21, 2025 at 2:02 PM, Yaroslav SL/C 6 line: @fa AGV#1 stoped near station ST 6line machine 3. Please check. Thanks
March 21, 2025 at 2:32 PM, 김동섭: VD collision occurs due to AGV departure in front of GF AN VD 6-2 Exit

Chunk 1188:
March 21, 2025 at 2:33 PM, 김동섭: It was caused by AGV departure.
March 21, 2025 at 2:35 PM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 63 Cathode: 234 Pre-STK> VD Anode: 2 Cathode: 4 Post-STK > stacking Anode: 367 Cathode: 157
March 21, 2025 at 2:48 PM, 김동섭: The door does not close after GF AN VD 6-3 AGV collision

Chunk 1189:
March 21, 2025 at 4:21 PM, T. Gàbornè C SL NC: @Farkas Tamàs Szia tudnál segíteni? Kértünk ki plateket de nem az a reel volt rajt ami a listán. Szeretnénk visza küldeni a CA reel raktárban. Tudnál segíteni? LTC1094 EC2P081F3113913B LTC0213 EC1P073F3227714A EC1P073F3229411B Ez nincs trayen. Köszönöm szépen.
March 21, 2025 at 4:23 PM, Farkas Tamàs: Szia. Leolvasás után nem viszi be?
March 21, 2025 at 4:26 PM, T. Gàbornè C SL NC: Nem próbáltuk, azt gondoltam kellesz hozzá. Mindjárt megprobáljuk.

Chunk 1190:
March 21, 2025 at 4:44 PM, Gégény Dávid: @duzzaman Md (MCS) Hello! We would like to return the product on the e0stkc51-M07, M08 port. It fails, it gives an MCS error.
March 21, 2025 at 4:44 PM, duzzaman Md (MCS): On it. Checking
March 21, 2025 at 4:46 PM, duzzaman Md (MCS): This is a lot that has already been received from the warehouse. @MES please check

Chunk 1191:
March 21, 2025 at 4:49 PM, Sazzad Bhai SKon: Error: Handy BCR no READ. For this error previous job was not completed (No carrier removed message from SCS >MCS). So no rack out report was sent from RTD to MES. So, MES still thinking the lot is inside the STK
March 21, 2025 at 4:50 PM, Sazzad Bhai SKon: Solution: manual rack out from MES
March 21, 2025 at 5:06 PM, Lajos Gábor F.A.: The technicians dont have access to mes. Could you solve it please?

Chunk 1192:
March 21, 2025 at 5:09 PM, Sazzad Bhai SKon: @MES could you please help? Because, We don't have access neither.

Chunk 1193:
March 21, 2025 at 6:21 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:10/13+2 Overtime Overtime (1): Pálosi Róbert, Csanálosi Gábor Sick (0):- Holiday (2): Magyar Balázs, Oláh András Shift change(1): Novák Zoltán Elektróda:(3) Szabadi Miklós, Kiss Balázs, Pálosi Róbert Assembly(6): GF: Novák Zoltán, Béki Norbert, Csanálosi Gábor 1F: Zsurbej Zsolt, Nagy Zsolt, Kasztel Balázs Modul(2): Martina Dávid, Nagy Gábor

Chunk 1194:
March 21, 2025 at 6:50 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 21, 2025 at 9:23 PM, Simon Dávid D SL NC: @VK (mcs) Hello, GF VD AN oldalon miért nem tölti az AGV a kemencéket?
March 21, 2025 at 9:25 PM, VK (mcs): There is only 2 available Plate.
March 21, 2025 at 10:44 PM, BekiNorbi: @VK (mcs) Hello We need new material for assy GF ca vd Csvdc010_P04/P03 port. Thank you in advance!

Chunk 1195:
March 21, 2025 at 10:45 PM, VK (mcs): Which equipment?
March 21, 2025 at 10:46 PM, BekiNorbi: C5 *
March 21, 2025 at 10:47 PM, VK (mcs): 5/1 ?
March 21, 2025 at 10:47 PM, VK (mcs): If yea, material on the way for port 3 and 4
March 21, 2025 at 10:48 PM, BekiNorbi: Thank you very much
March 21, 2025 at 11:53 PM, Simon Dávid D SL NC: @FA Hello,NC AN C1CNVA71-CV02-MCP hibába áll ,megnéznétek köszönöm

Chunk 1196:
March 22, 2025 at 12:03 AM, N. Attila SL: @Dániel Hufnágel helló Rátudnál nézni az alapanyag mozgásra ? 6 sor stackingen eléggé megfogyatkozott Köszi
March 22, 2025 at 12:05 AM, Dániel Hufnágel: @VK (mcs) Good evening! Can you check me please aviable material for stacking line 6? Thank you!
March 22, 2025 at 12:07 AM, VK (mcs): Available material Post_STK> stacking Anode: 285 Cathode:163

Chunk 1197:
March 22, 2025 at 12:33 AM, Yulya Kirsanova: Hello. Agv#8 stopped with error near Staсking Line 5/9 Please check @fa Thank you so much.
March 22, 2025 at 1:15 AM, Yulya Kirsanova: Hello. Agv#8 stopped with error near GF STACKING MGZ PLATE(AN) OUTPUT C1CNV072_P08 Please check @fa Thank you so much.
March 22, 2025 at 3:02 AM, Simon Dávid D SL NC: @FA halo,NC AN #2 Yaskawa megált pakolás közben ,megnéznétek köszönöm
March 22, 2025 at 3:07 AM, Csanálosi Gábor FA: Kész

Chunk 1198:
March 22, 2025 at 4:08 AM, Yulya Kirsanova: Port M02 of the plate with magazines, stood in the wrong position, please help. @fa Thank you so much.
March 22, 2025 at 5:41 AM, Elena SL: Hello please check AGV 7 near line 6-5.
March 22, 2025 at 5:41 AM, Elena SL: @FA
March 22, 2025 at 5:51 AM, Yulya Kirsanova: Hello. Agv#7 stopped with error near Staсking Line 5/16 Please check @Fa Thank you so much.

Chunk 1199:
March 22, 2025 at 8:44 AM, Karina: @fa Hello, AGV#8 stopped near 5 line, STK, machine #8, please check
March 22, 2025 at 9:50 AM, T. Gàbornè C SL NC: @Fa Sziasztok AN 51-es reel raktárnál nem jönnek a reelek. Megtudnátok nézni miért? Köszönöm szépen.
March 22, 2025 at 9:56 AM, Gégény Dávid: Nézem
March 22, 2025 at 9:59 AM, Gégény Dávid: A raktárak tettre készek, csak a feladat hiányzik nekik.

Chunk 1200:
March 22, 2025 at 10:08 AM, T. Gàbornè C SL NC: @Aaqib (MCS/RTD) GF AN 51 and #52 warehouses don't come reels, would you like to have a task? Thank you very much
March 22, 2025 at 10:12 AM, Shakir (MCS): Currently there is No job in SCS STKA51/52. @SCS @FA please check
March 22, 2025 at 10:28 AM, Shakir (MCS): Currently there is No job, Should we released material manually?
March 22, 2025 at 10:28 AM, Shakir (MCS): On manual Port

Chunk 1201:
March 22, 2025 at 10:40 AM, T. Gàbornè C SL NC: We have a total of AN 16 reels if we don't get it.
March 22, 2025 at 10:45 AM, Shakir (MCS): We are releasing 3 reels for 5 line and 3 reels for 6 line, Checking further. Thank you
March 22, 2025 at 10:46 AM, T. Gàbornè C SL NC: Thank you for much!
March 22, 2025 at 10:52 AM, Yon Ko/연커/: @MCS hello! VD AN AGV7, AGV6 idle with full materials. Could u please check this?

Chunk 1202:
March 22, 2025 at 10:55 AM, Shakir (MCS): The job has been terminated by OP, please to STK. Thank you
March 22, 2025 at 11:09 AM, T. Gàbornè C SL NC: This message was deleted.
March 22, 2025 at 11:12 AM, T. Gàbornè C SL NC: Dear, Please check, only 1 reel came . Thx
March 22, 2025 at 11:13 AM, T. Gàbornè C SL NC: @FA AN #51 reel raktárnál nem megy vissza a tray,megnéznétek? Köszönöm
March 22, 2025 at 11:17 AM, Shakir (MCS): You can collect the 3 reel on manual port for Line 5. Thank you

Chunk 1203:
March 22, 2025 at 11:26 AM, T. Gàbornè C SL NC: 3 reel go I can't send tray it back due to a MCS alarm. Please help. LTA0553 LTA0421 LTA0014 Thank you!
March 22, 2025 at 11:30 AM, Shakir (MCS): Please confirm the status of carrier Is it full or Empty ?
March 22, 2025 at 11:32 AM, T. Gàbornè C SL NC: Empty
March 22, 2025 at 11:37 AM, 강진복 Kang Jinbok: @방혁 PM(Bang.Hyuk) FA 안녕하세요. 현장에 An 5/6Line Reel 안나오고 있습니다. 확인부탁드립니다. 설비 릴 부족으로 곧 정지할 것 같습니다.

Chunk 1204:
March 22, 2025 at 11:38 AM, Shakir (MCS): We are releasing reels manually for line 6 Thank you
March 22, 2025 at 11:40 AM, 방혁 PM(Bang.Hyuk) FA: Can you explain what happening with LINE 5,6?
March 22, 2025 at 11:40 AM, KIM SEYEON [김세연]_FA: @Shakir (MCS) please check available reel at rtd
March 22, 2025 at 11:41 AM, Shakir (MCS): @MES please check this carrier status In MCS carrier is EmptyEmpty. The load status is different in MES. Please make EmptyEmpty. Thank you

Chunk 1205:
March 22, 2025 at 11:45 AM, Shakir (MCS): There is No material NC AN
March 22, 2025 at 11:48 AM, KIM SEYEON [김세연]_FA: @강진복 Kang Jinbok 대리님 자재가 없는것 같습니다.
March 22, 2025 at 11:50 AM, Shakir (MCS): In rtd for 5/6 AN :00 For CA 5/6 : 284 Thank you
March 22, 2025 at 11:52 AM, KIM SEYEON [김세연]_FA: @양원석 피엠님 음극릴이 없는게 이상한데, rtd rule을 봐주실수 있나요?
March 22, 2025 at 11:53 AM, KIM SEYEON [김세연]_FA: @Atom Yang(MCS/RTD) 매니저님 음극릴이 없는게 이상한데 rtd rule을 봐주실수 있나요?

Chunk 1206:
March 22, 2025 at 11:55 AM, Atom Yang(MCS/RTD): 네, 확인하겠습니다.
March 22, 2025 at 11:58 AM, KIM SEYEON [김세연]_FA: 감사합니다
March 22, 2025 at 12:04 PM, Atom Yang(MCS/RTD): @KIM SEYEON [김세연]_FA PM님, 현재 GF 에서 Notching으로 가는 conveyor 에 10개 이상의 carrier가 있는 것으로 MCS 시그템에서 보여직고 있습니다.
March 22, 2025 at 12:04 PM, Atom Yang(MCS/RTD): This message was deleted.
March 22, 2025 at 12:11 PM, Atom Yang(MCS/RTD): This message was deleted.

Chunk 1207:
March 22, 2025 at 12:22 PM, Atom Yang(MCS/RTD): @KIM SEYEON [김세연]_FA PM님. RTD RULE 에서는 Notching으로 가는 Reel 가능 자재가 없는 것으로 보여지고 있습니다.
March 22, 2025 at 12:23 PM, KIM SEYEON [김세연]_FA: 네 알겠습니다. 감사합니다.
March 22, 2025 at 12:23 PM, Atom Yang(MCS/RTD): RTD 변경 내역이 없는 것으로 봐서는 현재 조회 결과가 맞을 것 으로 보여집니다.
March 22, 2025 at 12:38 PM, T. Gàbornè C SL NC: What came Reel, 2 Reel is not good for me because 603. EA2P065E4245613A EA2P081F3135513A
March 22, 2025 at 12:38 PM, Shakir (MCS): This message was deleted.

Chunk 1208:
March 22, 2025 at 12:39 PM, Shakir (MCS): This message was deleted.
March 22, 2025 at 12:39 PM, Shakir (MCS): Please return back to the STKA51 Thank you
March 22, 2025 at 12:50 PM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 133 Cathode: 220 Pre-STK> VD Anode: 00 Cathode: 01 Post-STK > stacking Anode: 257 Cathode: 158
March 22, 2025 at 12:52 PM, Yaroslav SL/C 6 line: @fa AGV4 stopped near 6line ST#4. Please check. Thanks

Chunk 1209:
March 22, 2025 at 1:06 PM, Shakir (MCS): @Manufacturing Please check C1CNV072_M01 ,there is 1+1 carriers waiting,please remove it. Thank you very much!
March 22, 2025 at 1:07 PM, T. Gàbornè C SL NC: @MCS info GF NC AN stop: 13:00 5-6 line, missing AN reel.
March 22, 2025 at 1:10 PM, Shakir (MCS): @FA @Simon Attila F. A. Please check C1STKC71_P12 INV RUN time over error. Thank you
March 22, 2025 at 1:12 PM, Simon Attila F. A.: Coming...

Chunk 1210:
March 22, 2025 at 1:13 PM, Shakir (MCS): There is no reelable material that can go to Notching in RTD. Thank you
March 22, 2025 at 1:15 PM, Simon Attila F. A.: Köszi Gábor!
March 22, 2025 at 1:20 PM, Shakir (MCS): In MCS side everything things Okay, for line 6 for all BP ports we received LR but there is NO search Lot available. Thank you
March 22, 2025 at 2:01 PM, 강진복 Kang Jinbok: 전극쪽에서 확인 결과 음극 Ford 재고 확인시 트레이 id 미부여되서 입고된 릴들이 상당수 확인되었다고 합니다. 확인부탁드립니다.

Chunk 1211:
March 22, 2025 at 2:02 PM, Shakir (MCS): FYI For Line 6 AN, Transport job has been initiated, reels on the way for Manual port. Thank you.
March 22, 2025 at 2:04 PM, T. Gàbornè C SL NC: Thank you for information
March 22, 2025 at 2:10 PM, KIM SEYEON [김세연]_FA: 이것을 수동포트로 다시 뺐다가 바코드 찌고 다시 넣어야 합니다.
March 22, 2025 at 2:42 PM, 강진복 Kang Jinbok: 혹시 언제쯤 수동으로 빼는거 가능할까요? 지금 진행 가능하면 수동으로 받아서 사용하면 다시 넣을필요 없을것 같습니다.

Chunk 1212:
March 22, 2025 at 3:01 PM, KIM SEYEON [김세연]_FA: 강진복 대리님 수동으로 빼는것을 저희가 할수는 없습니다. 문제는 전극에서 릴에 ID 미부여되어서 들어오는것이고, 시스템 사용해서 전극이 빼줘야 합니다. 사용법을 모르면 저희가 지원은 하겠습니다.
March 22, 2025 at 3:07 PM, KIM SEYEON [김세연]_FA: @김건희 피엠님 전극 슬리터 점검이 필요합니다. 그리고 ID없는 릴 출고는 전극에서 부탁드립니다.
March 22, 2025 at 3:11 PM, 김건희: 트레이 아이디 없는 경우 케이스 확인 시 푸셔에서 신호를 주더라도 이재기 측에서 완료신호 없는 케이스 였습니다 슬리터 뿐 만 아니라 동시 확인 필요합미다

Chunk 1213:
March 22, 2025 at 3:13 PM, 김건희: 트레이 아이디 정보를 신규로 받기 위해서는 이재기 측에서 완료 신호를 전송 하고 덮어씌우기 진행 해야 하나 이재기 측에서 완료 신호를 슬리터 설비에 전송 한 이력이 없어 신규 정보 덮어 씌우기가 불가한 경우 입니다
March 22, 2025 at 5:43 PM, Yaroslav SL/C 6 line: @fa AGV4 stopped near 6line ST#4. Please check. Thanks
March 22, 2025 at 6:03 PM, Simon Dávid D SL NC: @VK (mcs) hello, GF NC AN line 5 áll nincs reel ,mennyi reel van a raktárban?

Chunk 1214:
March 22, 2025 at 6:07 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Hufnágel Dániel Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Zsurbej Zsolt, Novák Zoltán, Béki Norbert Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs

Chunk 1215:
March 22, 2025 at 6:11 PM, VK (mcs): Next available LOT 1 F Pre-STK> notching Anode:173 Cathode:216 Pre-STK > VD Anode: 1 Cathode: 3 Post_STK > stacking Anode: 255 Cathode:173 Reel > notching Anode: 51 Cathode: 263
March 22, 2025 at 6:14 PM, N. Attila SL: Hello. Line 6 stacking Agv#4 stopped , pls help me Thank you
March 22, 2025 at 6:22 PM, VK (mcs): There is material but ports are occupied by other carriers.

Chunk 1216:
March 22, 2025 at 6:27 PM, Simon Dávid D SL NC: I'll check it out right away, thank you.
March 22, 2025 at 7:05 PM, 이주봉PM LEE JUBONG(FA): LTA0483,1515,1610,0363,0821,1474,0536,0698,1002,0590
March 22, 2025 at 7:12 PM, 카스텔 발라지 F.A.: @VK (mcs) Good evening! Can you share please the available material (reel) for GF AN notching?
March 22, 2025 at 7:16 PM, VK (mcs): Reel > notching Anode: 47 Cathode:250
March 22, 2025 at 7:17 PM, 카스텔 발라지 F.A.: Thank you!

Chunk 1217:
March 22, 2025 at 7:32 PM, Dariimaa/다리마/Ivancsa: @mcs NC CA C0PV010_P12 MC5259 has not moved for a long time please check. Thank you!
March 22, 2025 at 7:36 PM, VK (mcs): It's waiting for LR
March 22, 2025 at 7:47 PM, 카스텔 발라지 F.A.: Can you check please C0PVC010_P04? in MCS i can see the MLC4034 plate , however phisicly not ther.
March 22, 2025 at 7:51 PM, VK (mcs): Last info about MLC4034, location was port 4 on 18th at 11:52:56

Chunk 1218:
March 22, 2025 at 7:54 PM, 카스텔 발라지 F.A.: I think it was removed manually
March 22, 2025 at 7:55 PM, VK (mcs): It does not make any issue, but if you would, I can modify MCS.
March 22, 2025 at 7:57 PM, Simon Dávid D SL NC: @FA Hello, NC CA 6/2 gépnél megált a magazin emelő ,megnéznétek köszönöm
March 22, 2025 at 7:57 PM, 카스텔 발라지 F.A.: Yes please 👍
March 22, 2025 at 7:57 PM, 카스텔 발라지 F.A.: Megyünk
March 22, 2025 at 8:07 PM, Elena SL: @FA PLEASE check port M02

Chunk 1219:
March 22, 2025 at 8:11 PM, 카스텔 발라지 F.A.: Készen van, viszont majd megállitjuk mert az out cv shuttle burkolata meg van feszülve, 2 percet vesz majd igénybe.
March 22, 2025 at 8:59 PM, N. Attila SL: Hello. Line 6 stacking Agv#4 stopped , pls help me Thank you Agv#4 it has stopped several times today.
March 22, 2025 at 9:55 PM, Yulya Kirsanova: Hello. Agv#10 stopped with error near Staсking Line 5/16 Please check @fa Thank you so much.

Chunk 1220:
March 22, 2025 at 10:13 PM, Yulya Kirsanova: Hello, need help, Port M02 Tray Data Mismatch Error. Please check @fa Thank you so much.
March 23, 2025 at 12:13 AM, Dariimaa/다리마/Ivancsa: @mcs VD AN C6VDA040 chamber has only 2 carriers. Please check Thank you!
March 23, 2025 at 12:20 AM, VK (mcs): LR received at 14:27:20 After that we received some load complete reports for port 3.!! Transport job required at 19:20 for ports 1and 2. Please LR again for ports 3 and 4

Chunk 1221:
March 23, 2025 at 2:02 AM, Elena SL: Good evening all. Please check information about AGV transport Line5 ST /17 transport does not bring anode magazines for a long time Thank you
March 23, 2025 at 2:05 AM, Elena SL: also, the transport does not pick up empty magazines 5/17 ... the station is in standby mode.
March 23, 2025 at 2:06 AM, Elena SL: @Fa
March 23, 2025 at 2:07 AM, 카스텔 발라지 F.A.: We going there and check the port. In ACS the port is full (MLA1024) but in MCS the port is empty

Chunk 1222:
March 23, 2025 at 2:09 AM, Elena SL: here is the MLA4100 plate
March 23, 2025 at 2:15 AM, 카스텔 발라지 F.A.: AGV #9 on the way 👍
March 23, 2025 at 6:32 AM, Mohammad Amir: @FA @Kertész Dániel Please check MLA0048 located at C1CNV071_12_029 ,it is not moving and causing other materials to block. Thank you very much!
March 23, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.23 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong

Chunk 1223:
March 23, 2025 at 7:32 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 195 Cathode: 212 Pre-STK> VD Anode: 01 Cathode: 03 Post-STK > stacking Anode: 212 Cathode: 198
March 23, 2025 at 7:45 AM, T. Gàbornè C SL NC: This message was deleted.
March 23, 2025 at 7:46 AM, T. Gàbornè C SL NC: @FA Jó reggelt AN 6-4 kemencében csak 2 platet pakolt az AGV Légyszíves nézzétek miért nem teszi bele a másik 2 platet. Köszönöm szépen

Chunk 1224:
March 23, 2025 at 7:48 AM, Mohammad Amir: Jó Reggelt, There is an active LR at 6:03 for remaining two chambers ,however there is no material available that's why job is not getting created . As soon as material will be available job will be created.
March 23, 2025 at 7:49 AM, Kertész Dániel: Thank you for the information @Mohammad Amir
March 23, 2025 at 7:50 AM, Mohammad Amir: You are welcome!

Chunk 1225:
March 23, 2025 at 8:05 AM, Mohammad Amir: Job has been created now successfully ✅ Carrier MLA1162 on the way for 6-4 VD AN P04 and MLA0073 on the way to P03. Thank you very much!
March 23, 2025 at 8:35 AM, Mohammad Amir: @Kertész Dániel @FA Please check E0STKC52_C02 there is Load Oversize Error(Right). Thank you!
March 23, 2025 at 8:36 AM, Kertész Dániel: @Csuti Zoltán F.A
March 23, 2025 at 9:36 AM, Yaroslav SL/C 6 line: Hello @fa AGV#4 stopped near 5 line ST#8. Please check. Thanks

Chunk 1226:
March 23, 2025 at 9:52 AM, Kertész Dániel: Done
March 23, 2025 at 10:27 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 198 Cathode: 214 Pre-STK> VD Anode: 01 Cathode: 00 Post-STK > stacking Anode: 214 Cathode: 191
March 23, 2025 at 11:06 AM, Yaroslav SL/C 6 line: @fa AGV#4 stopped near 6line ST#4. Please check. Thanks
March 23, 2025 at 11:08 AM, Mohammad Amir: @Kertész Dániel Please check AGV#4 Stacking there is T Align Zone abnormal error. Thank you!

Chunk 1227:
March 23, 2025 at 12:02 PM, Mohammad Amir: @Kertész Dániel Please check E0CNVC52(9041) there is Turn Abnormal Error. Thank you!
March 23, 2025 at 1:20 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 204 Cathode: 213 Pre-STK> VD Anode: 02 Cathode: 00 Post-STK > stacking Anode: 202 Cathode: 177
March 23, 2025 at 2:26 PM, Mohammad Amir: @Kertész Dániel Please check E0STKA51(70019) there is CV -Driven Timeover Error. Thank you!

Chunk 1228:
March 23, 2025 at 3:09 PM, Kateryna SSL C: Hello everyone! @fa Agv5 stopped between ST 5 and 6l, check please
March 23, 2025 at 3:48 PM, Mohammad Amir: @Manufacturing @FA Please make E0CNVA52_M01 to OUT type so that one job can be completed it is waiting since last 1 hour. Thank you!
March 23, 2025 at 3:50 PM, Hữu Thắng: @FA C2STKA72 - PO1 - Alarm . Plz check it .
March 23, 2025 at 3:50 PM, Simon Attila F. A.: Coming.

Chunk 1229:
March 23, 2025 at 3:53 PM, Simon Attila F. A.: Korean college working on ports. We ask for a little patience.
March 23, 2025 at 4:58 PM, Mohammad Amir: @Simon Attila F. A. Please check C1CNNV072_16_244 there is Data Mismatch Error. Thank you!
March 23, 2025 at 4:59 PM, Kertész Dániel: We're going
March 23, 2025 at 4:59 PM, Mohammad Amir: Thank you very much!

Chunk 1230:
March 23, 2025 at 5:01 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 198 Cathode: 211 Pre-STK> VD Anode: 03 Cathode: 01 Post-STK > stacking Anode: 208 Cathode: 188
March 23, 2025 at 5:26 PM, Yaroslav SL/C 6 line: AGV5 stopped near ST 5line #15. Please check. Thanks

Chunk 1231:
March 23, 2025 at 6:11 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (1):Csanálosi Gábor Sick (0):- Holiday (2):Kiss Balázs , Zsurbej Zsolt Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Hufnágel Dániel Assembly(6): GF: Novák Zoltán, Csanálosi Gábor, Béki Norbert 1F: Kasztel Balázs, Novák Károly, Nagy Zsolt Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs
March 23, 2025 at 6:36 PM, Elena SL: Hello all. AGV#5 stop near 5 line st

Chunk 1232:
March 23, 2025 at 6:40 PM, Dariimaa/다리마/Ivancsa: @mcs VD CA C6VDC040 chamber has only 2 carriers. Please check Thank you!
March 23, 2025 at 6:40 PM, 이주봉PM LEE JUBONG(FA): Sziasztok Day shift FA Technician Schedule Date: 2025.03.21 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen
March 23, 2025 at 6:41 PM, Shahbaz 샤바즈 MCS/RTD: The port 4 of VD Ca 6-4 is OOS in RTD that’s why job is not created.
March 23, 2025 at 7:05 PM, Elena SL: Stop again 😭

Chunk 1233:
March 23, 2025 at 7:07 PM, Elena SL: Blocks the movement of other vehicles. Please help.
March 23, 2025 at 7:58 PM, Simon Dávid D SL NC: @FA hello ,megált a #2 yaskawa ,megnéznétek köszönöm
March 23, 2025 at 8:01 PM, Csanálosi Gábor FA: Kész
March 23, 2025 at 8:18 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Ca reel stocker C51 “Ready off during forking “ Thanks
March 23, 2025 at 10:03 PM, Elena SL: @FA please check port M02
March 23, 2025 at 10:03 PM, Elena SL: AGV#10 frozen

Chunk 1234:
March 23, 2025 at 10:22 PM, Elena SL: Port not working. Please HELP!!!!
March 23, 2025 at 10:25 PM, Shahbaz 샤바즈 MCS/RTD: Is it C1CNV072_M02?
March 23, 2025 at 10:25 PM, Ivan Chobitko: Yes
March 23, 2025 at 10:28 PM, Shahbaz 샤바즈 MCS/RTD: There is RackInVaild error Magazine MA4217 is not closed.
March 23, 2025 at 10:56 PM, Simon Dávid D SL NC: @Shahbaz 샤바즈 MCS/RTD hello ,GF VD CA #49-es kemencébe nem hozott csak 2 plate az AGV és idő túllépés miatt hibára kialt ,megnéznéd köszönöm

Chunk 1235:
March 23, 2025 at 11:01 PM, Simon Dávid D SL NC: @Shahbaz 샤바즈 MCS/RTD hello GF VD #48-as kemencét AGV segítségével kérem a 72-es raktárba helyezni,köszönöm
March 23, 2025 at 11:02 PM, Shahbaz 샤바즈 MCS/RTD: The port P04 is OOS in RTD that’s job is not created. Port state should be reported again from the machine.
March 23, 2025 at 11:10 PM, Shahbaz 샤바즈 MCS/RTD: An or Ca?
March 23, 2025 at 11:12 PM, Simon Dávid D SL NC: AN #48

Chunk 1236:
March 23, 2025 at 11:13 PM, Shahbaz 샤바즈 MCS/RTD: @FA @ACS Please send the plates of VD An 6-3 to the stocker A72 manually. Thank you.
March 23, 2025 at 11:58 PM, 인제(Hwang): @Shahbaz 샤바즈 MCS/RTD I have re-requested Ca VD #49 P03,P04 LR. Please check
March 23, 2025 at 11:59 PM, Shahbaz 샤바즈 MCS/RTD: LR received. Thank you.
March 23, 2025 at 11:59 PM, 인제(Hwang): Thank you!
March 24, 2025 at 12:11 AM, Ivan Chobitko: AGV 5 again stuck L5 ST 8 Please check it @fa

Chunk 1237:
March 24, 2025 at 12:34 AM, Ivan Chobitko: AGV 7 stuck L5 ST 6 Please check @fa
March 24, 2025 at 12:37 AM, Dariimaa/다리마/Ivancsa: Solved
March 24, 2025 at 1:26 AM, Ivan Chobitko: @fa AGV1 stuck while loading MGZ CV72 out port P08
March 24, 2025 at 1:27 AM, Ivan Chobitko: Check please
March 24, 2025 at 1:35 AM, Elena SL: Please check AGV 1 near 6 line ST
March 24, 2025 at 2:55 AM, Ivan Chobitko: AGV5 L5 ST8
March 24, 2025 at 2:55 AM, Ivan Chobitko: Again stopped Check please @fa

Chunk 1238:
March 24, 2025 at 3:09 AM, Simon Dávid D SL NC: @FA hello NC AN #1 yaskawa megált megnéznétek köszönöm
March 24, 2025 at 3:14 AM, Csanálosi Gábor FA: Kész
March 24, 2025 at 6:10 AM, Baek Hojong(백호종)FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.24 Time:06:00-18:00 1. Jung woojun 2. Baek hojong Köszönöm szépen

Chunk 1239:
March 24, 2025 at 6:40 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1240:
March 24, 2025 at 6:56 AM, Mohammad Amir: @Ivan Chobitko Please check and remove 1+1 carriers from C1CNV072_M01. Thank you very much!
March 24, 2025 at 6:58 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.24 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 24, 2025 at 7:09 AM, Ivan Chobitko: Sorry My shift over I on my way to home Today L5-6 @Poluekto Serhii
March 24, 2025 at 7:09 AM, Mohammad Amir: Thank you very much for the information.

Chunk 1241:
March 24, 2025 at 7:10 AM, Mohammad Amir: @Poluekto Serhii Please check this issue now there are 1+2 carriers waiting. Thank you very much!
March 24, 2025 at 7:18 AM, 이한웅(삼구): Please check NC An RTV
March 24, 2025 at 7:18 AM, Mohammad Amir: @fa @Böröcz Tamás Please check E0CNVA52 (7003) thee is Data Mismatch error and reels delivery has impacted. Thank you!
March 24, 2025 at 7:19 AM, Mohammad Amir: And RTV as well there is Run Time over alaram.

Chunk 1242:
March 24, 2025 at 7:37 AM, Hồng Anh SL NC&VD 1F: Pls request AGV come to Chamber 43(5-7) CA for take out and put in plate again. Now plate wrong position.
March 24, 2025 at 7:57 AM, Hồng Anh SL NC&VD 1F: Pls check for RTV NC AN pls. We long time dont have new reel come.
March 24, 2025 at 7:59 AM, Zaya/ivancsa FA: Done
March 24, 2025 at 8:04 AM, Hồng Anh SL NC&VD 1F: Thank you!

Chunk 1243:
March 24, 2025 at 8:04 AM, duzzaman Md (MCS): @fa Please check E0STKC51 is out of service for a while. The reels delivery been stopped. Please check it.
March 24, 2025 at 8:05 AM, duzzaman Md (MCS): @Böröcz Tamás Please check this on priority as because of this issue reels delivery has been stopped. Thank you!
March 24, 2025 at 8:10 AM, Mohammad Amir: There is issue with the STKA51 that's why reels delivery has stopped we already informed FA team members. Thank you!

Chunk 1244:
March 24, 2025 at 8:11 AM, Hồng Anh SL NC&VD 1F: Thank you!
March 24, 2025 at 8:11 AM, Mohammad Amir: You are welcome!
March 24, 2025 at 8:18 AM, 이성종(Lee Sungjong) invited 이효진(Mr.Jin).
March 24, 2025 at 8:18 AM, 이성종(Lee Sungjong) invited 신정수.
March 24, 2025 at 8:22 AM, Hồng Anh SL NC&VD 1F: Pls check for AGV 6 CA NC pls. Now this AGV stop on 5/1 mc.
March 24, 2025 at 8:24 AM, Böröcz Tamás: Megyek csak egy forintot nem ér a technológia

Chunk 1245:
March 24, 2025 at 8:25 AM, 박태영: From today, any changes to RTD and MCS related logic cannot be made without Park Taeyoung PM's approval.
March 24, 2025 at 8:32 AM, Mohammad Amir: @Poluekto Serhii Please check this issue now there are 1+4 carriers waiting. Thank you very much!
March 24, 2025 at 8:34 AM, Böröcz Tamás: C51?
March 24, 2025 at 8:37 AM, duzzaman Md (MCS): Now, issue has been resolved
March 24, 2025 at 8:40 AM, Böröcz Tamás: There was no issue

Chunk 1246:
March 24, 2025 at 8:43 AM, Mohammad Amir: It was Anode 51 and because of the issue reels delivery had been stopped. But now issue has resolved.
March 24, 2025 at 8:43 AM, Mohammad Amir: @Böröcz Tamás
March 24, 2025 at 9:12 AM, 배병민 (Bae Byoungmin): This message was deleted.
March 24, 2025 at 9:13 AM, Mr.Miti (미티) FA: We dont have a manual charger at form/modul area?

Chunk 1247:
March 24, 2025 at 9:35 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STKC52 _C02 there is MCP Auto/Manual Mode Error. Thank you!
March 24, 2025 at 9:36 AM, Mohammad Amir: Also check please E0STKC51_C02 Port Interface error. Thank you!
March 24, 2025 at 9:54 AM, Mohammad Amir: @Poluekto Serhii @Manufacturing Please check this issue now there are 1+5 carriers waiting and it is slowing down the stacking materials delivery. Please take action. Thank you very much!

Chunk 1248:
March 24, 2025 at 10:21 AM, 김동섭: GF AN VD 5-6 Half Chamber. AN VD 5-1 is also a half chamber.
March 24, 2025 at 10:22 AM, Mohammad Amir: Checking
March 24, 2025 at 10:24 AM, 김동섭: Half chamber occurs during AGV TEST in chamber
March 24, 2025 at 10:26 AM, Mohammad Amir: @Manufacturing Please press LR for remaining half chamber P01 and P02 of 5-1 VD AN. Thank you very much!

Chunk 1249:
March 24, 2025 at 10:27 AM, Mohammad Amir: @Manufacturing Please press LR for remaining half chamber P01 and P02 of 5-6 VD AN. Thank you very much!
March 24, 2025 at 10:30 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 226 Cathode: 227 Pre-STK> VD Anode: 01 Cathode: 02 Post-STK > stacking Anode: 187 Cathode: 168
March 24, 2025 at 12:32 PM, Mohammad Amir: This message was deleted.

Chunk 1250:
March 24, 2025 at 12:32 PM, Mohammad Amir: @Manufacturing Please press LR for remaining half chamber P03 and P04 of 5-4 VD CA there is half chamber situation. Thank you very much!
March 24, 2025 at 12:57 PM, Yon Ko/연커/: @MCS Hello VD AN chamber #42(5-6) #37(5-1) These chambers have been waiting for materials for a long time. Please check and provide an update. Thank u!
March 24, 2025 at 12:57 PM, Mohammad Amir: Checking

Chunk 1251:
March 24, 2025 at 12:59 PM, Mohammad Amir: We have received LR successfully at 12:34 and 12:35 for both machines 5-1 and 5-6 An VD for empty chambers but currently there is no material available that's why jobs are not getting created once materials will be available jobs will be created. Monitoring the process. Thank you!
March 24, 2025 at 1:22 PM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0STKC52_6022 there is CV -Driven Timeover. Thank you very much!

Chunk 1252:
March 24, 2025 at 1:37 PM, Hồng Anh SL NC&VD 1F: Pls check for chamber AN #37 and #42 Chamber CA #40 3 chamber long time cannot start bcs inside only have 2 plate. Pls check again
March 24, 2025 at 1:39 PM, Mohammad Amir: For AN #42 Job has been created successfully ✅ Carriers on the way. Thank you!
March 24, 2025 at 1:39 PM, Mohammad Amir: For #37 and #40 AN VD still waiting for materials. As soon as material will be available job will be created. Thank you!

Chunk 1253:
March 24, 2025 at 1:41 PM, Hồng Anh SL NC&VD 1F: Pls check for Robot #2 CA NC. Data mismatch pls.
March 24, 2025 at 1:41 PM, Hồng Anh SL NC&VD 1F: Thank you for check!
March 24, 2025 at 1:41 PM, Mohammad Amir: You are welcome!
March 24, 2025 at 1:42 PM, Mohammad Amir: For #40 jobs have been completed now all four chambers are filled. Thank you very much!
March 24, 2025 at 1:43 PM, Mohammad Amir: @Hồng Anh SL NC&VD 1F

Chunk 1254:
March 24, 2025 at 2:31 PM, 김동섭: GF AN VD Unit 6-4 has a poor plate seating at the lower right. Please place it back on AGV.
March 24, 2025 at 2:34 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 230 Cathode: 245 Pre-STK> VD Anode: 00 Cathode: 00 Post-STK > stacking Anode: 178 Cathode: 162
March 24, 2025 at 3:12 PM, Debreczeni Ármin invited Mykhailo.

Chunk 1255:
March 24, 2025 at 3:24 PM, Mohammad Amir: @Manufacturing Please press LR for P03 and P04 chambers of CA VD 6-2,6-8,6-10 there are half chamber situation. Thank you very much!
March 24, 2025 at 5:41 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 49(6-4) CA VD for take out all of plate inside chamber pls. We need to change heater.

Chunk 1256:
March 24, 2025 at 6:21 PM, Szücs Géza FT-B: Jó estét! Good morning! "B" műszak, 8+3/11(+1) Tech, 1Sl Overtime(3): Novák Zoltán, Novák Károly, Béki Norbert Holiday(3+1): Czeilinger Krisztián, Gerbovits Kevin, Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Pálosi róbert, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Novák Zoltán, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Pintye Miklós László, Béki Norbert --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János ----

Chunk 1257:
March 24, 2025 at 6:37 PM, M.Ferenc "B"Nc/Vd SL: @mcs Hello! GF NC cathode side. Lines 5-6. No reels arrive from the automatic warehouse. Please check what could be the problem.
March 24, 2025 at 6:41 PM, Shahbaz 샤바즈 MCS/RTD: Currently no Ca reel available in the warehouse.
March 24, 2025 at 6:41 PM, M.Ferenc "B"Nc/Vd SL: Okay! Thank you!

Chunk 1258:
March 24, 2025 at 8:20 PM, M.Ferenc "B"Nc/Vd SL: @FA GF VD Ca #53 (6-8) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later.
March 24, 2025 at 8:48 PM, Badamaa/Ivancsa FA: solved
March 24, 2025 at 11:14 PM, Shahbaz 샤바즈 MCS/RTD: @FA There is a job for NC Ca 5-2 but the Port C0PVC020_P12 is OOS. Please check. Thank you.

Chunk 1259:
March 24, 2025 at 11:56 PM, M.Ferenc "B"Nc/Vd SL: @MCS GF NC Cathode side. Again, no reels are arriving from the automatic warehouse. There is a reel that can be used according to the electrode process. Please see what the problem is.
March 24, 2025 at 11:59 PM, Shahbaz 샤바즈 MCS/RTD: Sorry but according to RTD rules there is no reel available right now.
March 25, 2025 at 12:00 AM, Novák Károly F. A.: Solved
March 25, 2025 at 12:03 AM, M.Ferenc "B"Nc/Vd SL: Thanks!

Chunk 1260:
March 25, 2025 at 4:34 AM, M.Ferenc "B"Nc/Vd SL: @Shahbaz 샤바즈 MCS/RTD Hello! We have 2 MES defective reels. You can handle the problem? 6102 port LTA0574 6104 port LTA0689
March 25, 2025 at 4:34 AM, M.Ferenc "B"Nc/Vd SL: We would like to send them back to the warehouse.
March 25, 2025 at 4:35 AM, Shahbaz 샤바즈 MCS/RTD: Sorry I am not sure about this.
March 25, 2025 at 4:37 AM, M.Ferenc "B"Nc/Vd SL: Okay! Thank you!

Chunk 1261:
March 25, 2025 at 4:52 AM, M.Ferenc "B"Nc/Vd SL: @FA GF VD Ca #47 (6-2) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later.
March 25, 2025 at 5:12 AM, M.Ferenc "B"Nc/Vd SL: Nc Ca robot#2 error.
March 25, 2025 at 5:29 AM, Novák Károly F. A.: Kész

Chunk 1262:
March 25, 2025 at 6:07 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1263:
March 25, 2025 at 6:12 AM, Khaliun/Ivancsa FA: @fa tech Nochin Cathode robot#2 error pls check
March 25, 2025 at 6:12 AM, Khaliun/Ivancsa FA: Error name:Data report incomplete error
March 25, 2025 at 6:26 AM, Böröcz Tamás: Causation: plate data was not reported to the upper level Resolved: take action by reporting to the upper level in CCS
March 25, 2025 at 6:26 AM, Böröcz Tamás: @MCS do you have any idea to solve the problem?

Chunk 1264:
March 25, 2025 at 6:26 AM, Hồng Anh SL NC&VD 1F: Pls RTV AN NC check. Now alarm.
March 25, 2025 at 6:28 AM, Mohammad Amir: This message was deleted.
March 25, 2025 at 6:28 AM, Mohammad Amir: Please tell me Carrier id. Thank you!
March 25, 2025 at 6:37 AM, Böröcz Tamás: C0PVC020_P13 MC1381 MC1381 MC6240 MC4166 MC6109 MC5260 MC2249 C0PVC020_P12 MC5265 MC5265 MC4528 MC6521 MC3012 MC4072 MC4132
March 25, 2025 at 6:44 AM, Böröcz Tamás: Any idea?
March 25, 2025 at 6:45 AM, Mohammad Amir: Checking

Chunk 1265:
March 25, 2025 at 6:48 AM, Mohammad Amir: For MC1381 located at C0PVC020_P13 we didn't receive any magazine Palletize report that's why it is not moving. @CCS @FA check this issue. Why we didn't receive Magazine Palletize report. Thank you very much!
March 25, 2025 at 6:49 AM, Böröcz Tamás: Did you ever receive it?

Chunk 1266:
March 25, 2025 at 6:51 AM, Mohammad Amir: For MC5265 there is already a job exists with destination C5NCC030_P03 ,it is not moving cause currently Robot #2 is OOS . Thank you very much!
March 25, 2025 at 6:51 AM, Mohammad Amir: Checking
March 25, 2025 at 6:51 AM, Mohammad Amir: No we didn't receive it yet. Thank you very much!
March 25, 2025 at 6:59 AM, Böröcz Tamás: You are very big help
March 25, 2025 at 6:59 AM, Böröcz Tamás: Thanks
March 25, 2025 at 6:59 AM, Böröcz Tamás: I will solve it

Chunk 1267:
March 25, 2025 at 6:59 AM, Böröcz Tamás: Have a coffee
March 25, 2025 at 7:00 AM, Mohammad Amir: You are welcome!
March 25, 2025 at 7:04 AM, Mohammad Amir: We need to receive Magazine Palletize report for MC1381 . Afterwards it will move. Please check this is the reason for not moving. Thank you very much!
March 25, 2025 at 7:04 AM, Böröcz Tamás: There's no palletsize there
March 25, 2025 at 7:05 AM, Böröcz Tamás: Thank you

Chunk 1268:
March 25, 2025 at 7:08 AM, Mohammad Amir: According to logic we should receive and afterwards it moves. For MC5265 we received Palletize report that's why job was created. But because of MC1381 we didn't receive Magazine Palletize report that is why there was error and job was not getting created. And as it caused Robot#2 to be OOS so MC5265 also not moving cause of this. Thank you very much!
March 25, 2025 at 7:11 AM, Böröcz Tamás left this chatroom.

Chunk 1269:
March 25, 2025 at 7:12 AM, Mr.Miti (미티) FA invited Böröcz Tamás.
March 25, 2025 at 7:22 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check E0CNVA52_07_005 there is Data Mismatch Error. Thank you!
March 25, 2025 at 7:33 AM, Böröcz Tamás left this chatroom.
March 25, 2025 at 7:38 AM, Mr.Miti (미티) FA: @Mohammad Amir According to MES, there are more than 20 Ford material at warehouse (c51, c52) for CA NC, but the warehouse does not automatically generate work for delivery. Please check.

Chunk 1270:
March 25, 2025 at 7:40 AM, Mohammad Amir: Checking
March 25, 2025 at 7:41 AM, Mr.Miti (미티) FA: Thank you sir!
March 25, 2025 at 7:42 AM, Mohammad Amir: You are welcome!
March 25, 2025 at 7:48 AM, Mohammad Amir: There are total 6 materials in RTD but it gets filtered based on Reel_RTV_BP that's why count becomes zero and there is no transferable materials available. Thank you very much!
March 25, 2025 at 8:01 AM, Poluekto Serhii: Hello.AGV#4 stopped near 6 line ST#16. Please check. Thanks

Chunk 1271:
March 25, 2025 at 8:03 AM, Khaliun/Ivancsa FA: Okey
March 25, 2025 at 8:08 AM, 이한웅(삼구): @Jun(정우준)_SKOH FA PM님 저희 릴 자동 출고가 안되고 있는데 릴이 없는건가요?
March 25, 2025 at 8:10 AM, Hồng Anh SL NC&VD 1F: NC CA Robot 2 error. Pls check
March 25, 2025 at 8:12 AM, Jun(정우준)_SKOH FA: 양극 릴, RTV, 크레인 자동 출고 안되는 건 확인해보겠습니다.
March 25, 2025 at 8:14 AM, P.Bence A SSL: @Mr.Miti (미티) FA tudsz jönni ca Notching ?
March 25, 2025 at 8:15 AM, Mr.Miti (미티) FA: Mi a baj?
March 25, 2025 at 8:31 AM, Jun(정우준)_SKOH FA: 반송가능 자재가 없습니다

Chunk 1272:
March 25, 2025 at 8:34 AM, 이한웅(삼구): 리스트에 맵핑 안되는거는 혹시 해결 된건가요? 저희 지금 리스트 받아서 수동 출고 진행 중입니다.
March 25, 2025 at 8:48 AM, Mohammad Amir: @CCS @FA @상진 Dear Manager , Could you please check C0PVC020_P13 ,it is not sending magazine Palletize report to us ,i checked for last few magazine. Thank you very much!
March 25, 2025 at 8:53 AM, Mohammad Amir: @FA @Mr.Miti (미티) FA Please check C1STKC71_M01_OP01 there is Data Mismatch Error. Thank you very much!

Chunk 1273:
March 25, 2025 at 9:11 AM, Hồng Anh SL NC&VD 1F: CA NC Robot 2 error. Pls check
March 25, 2025 at 9:14 AM, Mohammad Amir: @Manufacturing Please check there are 1+1 carriers waiting. Thank you very much!
March 25, 2025 at 9:44 AM, Khaliun/Ivancsa FA: @MCS GF~ST~cathode AGV#4 idle pls check
March 25, 2025 at 9:45 AM, duzzaman Md (MCS): Checking
March 25, 2025 at 9:56 AM, duzzaman Md (MCS): Please send this agv back to STK
March 25, 2025 at 10:05 AM, 이한웅(삼구): Please Check E0STKC51_M03

Chunk 1274:
March 25, 2025 at 10:07 AM, duzzaman Md (MCS): There is a light curtain-01 error
March 25, 2025 at 10:10 AM, Skwarek Tibor: Done
March 25, 2025 at 11:53 AM, Hồng Anh SL NC&VD 1F: Pls check AGV 10 CA VD.
March 25, 2025 at 1:55 PM, Hồng Anh SL NC&VD 1F: Pls check for 2 chamber AN VD 39(5-3) and 40(5-4) only half chamber . Pls request AGV give more 2 plate
March 25, 2025 at 1:55 PM, Mohammad Amir: Checking

Chunk 1275:
March 25, 2025 at 1:57 PM, Mohammad Amir: Please press LR for P01 and P02 of 5-4 AN VD and also Press LR for P03 and P04 for 5-3 AN VD. Thank you very much!
March 25, 2025 at 2:04 PM, Hồng Anh SL NC&VD 1F: Ok i got it
March 25, 2025 at 2:32 PM, 김동섭: AGV Alarm Stop in front of GF CA VD 6-8
March 25, 2025 at 3:17 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 37 and 39 CA for take out all of plate inside chamber. We fix heater now.

Chunk 1276:
March 25, 2025 at 3:23 PM, duzzaman Md (MCS): Please press UR
March 25, 2025 at 3:24 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come and manual AGV take out.
March 25, 2025 at 3:29 PM, Mohammad Amir: @ACS @Yon Ko/연커/ Please resolve this issue and after inform us so that we can update the information. Thank you very much!
March 25, 2025 at 3:30 PM, Khaliun/Ivancsa FA: we are working here
March 25, 2025 at 3:31 PM, Mohammad Amir: Thank you very much!

Chunk 1277:
March 25, 2025 at 3:33 PM, 김동섭: The GF AN VD 5-3, 5-4, 5-6 half-chamber has been in the state for a long time. Please check it.
March 25, 2025 at 3:34 PM, Mohammad Amir: Checking
March 25, 2025 at 3:36 PM, Mohammad Amir: LR received for all the mentioned machines 5-3,5-4,5-6 AN VD but unfortunately currently there is no material available. As soon as material will be available jobs will be created. Thank you very much!
March 25, 2025 at 3:38 PM, 김동섭: Thank you for the confirmation.

Chunk 1278:
March 25, 2025 at 3:38 PM, Mohammad Amir: You are welcome,Sir!
March 25, 2025 at 3:44 PM, Badamaa/Ivancsa FA: Solved
March 25, 2025 at 3:48 PM, Hồng Anh SL NC&VD 1F: Sorry, we press LR and until now still wait 2 more plate. Chamber AN #39; #40; #42 pls recheck

Chunk 1279:
March 25, 2025 at 3:49 PM, Mohammad Amir: LR received for all the mentioned machines 5-3,5-4,5-6 AN VD but unfortunately currently there is no material available. As soon as material will be available jobs will be created. Thank you very much!
March 25, 2025 at 4:45 PM, 이한웅(삼구): How many GF Ca reel warehouse 5/6 line available materials? @Mohammad Amir
March 25, 2025 at 4:46 PM, Mohammad Amir: Checking Sir !
March 25, 2025 at 4:47 PM, Mohammad Amir: An-42 Ca-18

Chunk 1280:
March 25, 2025 at 4:50 PM, 이한웅(삼구): Thanks for the info.!👍
March 25, 2025 at 4:50 PM, Mohammad Amir: You are welcome,Sir!
March 25, 2025 at 5:44 PM, 이한웅(삼구): Please Check NC An RTV
March 25, 2025 at 6:12 PM, 임석호(Henry): This message was deleted.
March 25, 2025 at 6:12 PM, M.Ferenc "B"Nc/Vd SL: NC AN reel conveyor stop. "Tray data missmatch error. Pleae check.

Chunk 1281:
March 25, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 6+5/11(+1) Tech, 1Sl Overtime(5): Novák Zoltán, Novák Károly, Kasztel Balázs, Zsurbej Zsolt, Nagy Zsolt Holiday(5+1): Czeilinger Krisztián, Gerbovits Kevin, Kovács Ágnes, Pálosi Róbert,Takács Ádám, (+Radics András) Sick(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Kasztel Balázs --------------- Assy GF (3): Novák Zoltán, Novák Károly, Pintye Miklós --------------- Assy 1F (3): Böröczki Balázs, Zsurbej Zsolt, Nagy Zsolt --------------- Form

Chunk 1282:
March 25, 2025 at 10:29 PM, 강진복 Kang Jinbok: Cathode 5/6Line Reel does not come out. Please check.
March 25, 2025 at 10:32 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check LTC1110 is on STKC51 crane C01 for long time. Thank you.
March 25, 2025 at 10:51 PM, Shahbaz 샤바즈 MCS/RTD: @FA @Szücs Géza FT-B @Novák Károly F. A. It seems to be Ca Reel stocker C51 cranes are silent stopped. Please check. Thank you
March 25, 2025 at 11:20 PM, Novák Károly F. A.: Solved

Chunk 1283:
March 25, 2025 at 11:22 PM, Shahbaz 샤바즈 MCS/RTD: Thank you!
March 25, 2025 at 11:47 PM, 강진복 Kang Jinbok: An Robot#1 Please check the stop.
March 26, 2025 at 12:08 AM, Novák Károly F. A.: Solved
March 26, 2025 at 12:20 AM, 강진복 Kang Jinbok: NC An5-3 Agv#7 Please check the stop.
March 26, 2025 at 12:25 AM, M.Ferenc "B"Nc/Vd SL: 6-3
March 26, 2025 at 12:26 AM, M.Ferenc "B"Nc/Vd SL: Align over current
March 26, 2025 at 12:32 AM, Pintye Miklós FA.: Solved

Chunk 1284:
March 26, 2025 at 5:25 AM, M.Ferenc "B"Nc/Vd SL: @FA Vd Ca AGV #5 stopped near #19 VD chamber
March 26, 2025 at 7:01 AM, Jun(정우준)_SKOH FA: Day Shift FA Technician Schedule Date: 2025.Mar.26 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong
March 26, 2025 at 8:04 AM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 116 Cathode: 175 Pre-STK> VD Anode: 03 Cathode: 02 Post-STK > stacking Anode: 280 Cathode: 220

Chunk 1285:
March 26, 2025 at 10:49 AM, duzzaman Md (MCS): Please check E0CNV51_08_046 Port Interface error. Thank you! @FA
March 26, 2025 at 10:54 AM, Dariimaa/다리마/Ivancsa: @duzzaman Md (MCS) hello VD AN 6-4 port 1,2 (MES) AGV ID Reporting time. Please check it. Thank you!
March 26, 2025 at 10:58 AM, duzzaman Md (MCS): For Port 1 and 2, AGV has been assigned at 10:49
March 26, 2025 at 10:59 AM, duzzaman Md (MCS): Please check AGV 10, which is under alarm

Chunk 1286:
March 26, 2025 at 12:45 PM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 111 Cathode: 170 Pre-STK> VD Anode: 00 Cathode: 03 Post-STK > stacking Anode: 293 Cathode: 217
March 26, 2025 at 4:26 PM, duzzaman Md (MCS): @FA Please check E0CNVC51_08_046, There is 'Port interface error' for a while. Thank you.
March 26, 2025 at 4:35 PM, Skwarek Tibor: Done
March 26, 2025 at 4:36 PM, duzzaman Md (MCS): Thank you for your support.

Chunk 1287:
March 26, 2025 at 4:38 PM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 117 Cathode: 172 Pre-STK> VD Anode: 01 Cathode: 01 Post-STK > stacking Anode: 278 Cathode: 214
March 26, 2025 at 4:39 PM, Skwarek Tibor: You re welcome.
March 26, 2025 at 5:12 PM, 이한웅(삼구): I accidentally touched the STK warehouse light curtain sensor. Sorry. @FA
March 26, 2025 at 5:13 PM, Kertész Dániel: We are here

Chunk 1288:
March 26, 2025 at 6:12 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 26, 2025 at 6:21 PM, VK (mcs): @FA Please check Cathode pre-STK C71 port 21(13001) MLC1178 does not transfer

Chunk 1289:
March 26, 2025 at 6:46 PM, N.Zoli F.A.: the command is stuck, need to generate a new job
March 26, 2025 at 6:51 PM, VK (mcs): Please delete current command
March 26, 2025 at 6:54 PM, N.Zoli F.A.: Solved
March 26, 2025 at 7:41 PM, Yulya Kirsanova: Hello. Agv#1 stopped with error near Staсking Line 5/7 Please check @fa Thank you so much.
March 26, 2025 at 7:41 PM, VK (mcs): @FA Please check Cathode reel STK C52 Ready off during forking
March 26, 2025 at 7:45 PM, Yon Ko/연커/: Solved

Chunk 1290:
March 26, 2025 at 7:51 PM, Yulya Kirsanova: Thank you
March 26, 2025 at 8:04 PM, Ivan Chobitko: AGV 4 stuck L6 ST 11 @fa Check please
March 26, 2025 at 8:13 PM, Yon Ko/연커/: Solved
March 26, 2025 at 9:03 PM, 강진복 Kang Jinbok: @RTD ID:TEMP Please reset your password.
March 26, 2025 at 9:04 PM, VK (mcs): Unfortunately, I have no access to RTD anymore.
March 26, 2025 at 9:50 PM, 카스텔 발라지 F.A.: This message was deleted.

Chunk 1291:
March 26, 2025 at 10:17 PM, Simon Dávid D SL NC: @FA hello GF CA VD megalt az AGV #4,megnéznétek köszönöm
March 26, 2025 at 10:20 PM, Zaya/ivancsa FA: solved
March 26, 2025 at 11:27 PM, Nguyen Huy invited Thony pham.
March 27, 2025 at 5:26 AM, VK (mcs): @FA Please check Anode reel STK A52 There is no error but cranes are stopped!
March 27, 2025 at 5:40 AM, N.Zoli F.A.: Solved

Chunk 1292:
March 27, 2025 at 6:19 AM, Dariimaa/다리마/Ivancsa: @mcs hello Please check NC AN C0PVA020_P12 MA6433 has not moved for a long time. Thank you!
March 27, 2025 at 6:29 AM, Shakir (MCS): We received the Magazine palletize report and UR successfully from this port. MSC side is okay. Monitoring further Thank you
March 27, 2025 at 7:03 AM, 이주봉PM LEE JUBONG(FA): @이한웅(삼구) @강진복 Kang Jinbok @인제(Hwang) RTD ID:TEMP 비밀번호 초기화 했어요. 확인 부탁해요.
March 27, 2025 at 7:31 AM, Bilgee/빌지 /A조/AGV left this chatroom.

Chunk 1293:
March 27, 2025 at 8:33 AM, Shakir (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 95 Cathode: 153 Pre-STK> VD Anode: 01 Cathode: 02 Post-STK > stacking Anode: 306 Cathode: 219
March 27, 2025 at 9:07 AM, 최정한.KOVA: VD 양극 5-7 좌측하부 근접센서 고장입니다. 교체필요합니다
March 27, 2025 at 9:25 AM, Shakir (MCS): @FA @Simon Attila F. A. Please check E0CNVA51_06_303 , turn abnormal error. Thank you
March 27, 2025 at 9:33 AM, Simon Attila F. A.: Korean support team is working there.

Chunk 1294:
March 27, 2025 at 1:11 PM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 120 Cathode: 175 Pre-STK> VD Anode: 01 Cathode: 03 Post-STK > stacking Anode: 306 Cathode: 225
March 27, 2025 at 2:29 PM, 이한웅(삼구): NC Ca 5-2 #6 AGV 풀 매거진 안착 불량 확인 부탁드립니다. @이주봉PM LEE JUBONG(FA)
March 27, 2025 at 2:59 PM, T. Gàbornè C SL NC: @Fa Légyszíves nézzétek meg AN 5#2-re miért nem érkezik üres mgz? Köszönöm szépen

Chunk 1295:
March 27, 2025 at 3:02 PM, Shakir (MCS): LR received but there is No lot available Thank you
March 27, 2025 at 3:07 PM, Lajos Gábor F.A.: Can you check it please, C0PVA020_P13 , there are empty mgz waiting for order
March 27, 2025 at 3:09 PM, Shakir (MCS): The transfer job exist but the destination NC4-1 is OOS. Thank you
March 27, 2025 at 3:16 PM, T. Gàbornè C SL NC: This message was deleted.
March 27, 2025 at 3:17 PM, T. Gàbornè C SL NC: AN 4#1 manual prodaction finished. Please help me. Thx

Chunk 1296:
March 27, 2025 at 3:18 PM, Shakir (MCS): What is the problem?
March 27, 2025 at 3:22 PM, Shakir (MCS): The Job for 4#1 line exists but it is alternated because of ports are out of service. Whenever port INSERVICE the job will be executed. Thank you.
March 27, 2025 at 3:23 PM, Shakir (MCS): @FA PLEASE CHECK
March 27, 2025 at 3:26 PM, 인제(Hwang): We have manually started production today. Please delete all LR jobs on 4Line NC as LR was requested incorrectly

Chunk 1297:
March 27, 2025 at 3:26 PM, duzzaman Md (MCS): On it .thank you
March 27, 2025 at 3:27 PM, 인제(Hwang): Thank you!
March 27, 2025 at 3:28 PM, duzzaman Md (MCS): Job has been cancelled. Thank you
March 27, 2025 at 3:43 PM, T. Gàbornè C SL NC: @MCS Please check AN 5/1, 5/2, 5/3 machine empty mgz wait.
March 27, 2025 at 3:48 PM, Shakir (MCS): No search lot available. No empty mgz available at gantry output. Whenever mgz available it will move to the machine LR received for all machines. Thank you

Chunk 1298:
March 27, 2025 at 4:00 PM, duzzaman Md (MCS): Next LOT quantity available GF Pre-STK > Notching Anode: 127 Cathode: 176 Pre-STK> VD Anode: 03 Cathode: 01 Post-STK > stacking Anode: 309 Cathode: 224
March 27, 2025 at 4:16 PM, Dariimaa/다리마/Ivancsa: Please check C0PVA020_P13 MA3011 there are empty mgz waiting for order. Thank you!
March 27, 2025 at 4:27 PM, 이한웅(삼구): Can you please delete all the jobs for the 4-line notching equipment? @Shakir (MCS)

Chunk 1299:
March 27, 2025 at 4:27 PM, duzzaman Md (MCS): Already job exists for line 4. As there were load requests. However the machine is out of service. This job is alternated. We are cancelling it. Thanks
March 27, 2025 at 4:28 PM, Shakir (MCS): Process seems normal. There are enough empty magazines available at the gantry. They are waiting for the full magazines as they will be replaced with empty ones.

Chunk 1300:
March 27, 2025 at 4:29 PM, Simon Attila F. A.: No more manufacturing today on an nc line4. Please delete agv1 and agv9 orders for this line.
March 27, 2025 at 4:30 PM, duzzaman Md (MCS): For 5/1, Job has already been initiated. Thank you
March 27, 2025 at 4:30 PM, Simon Attila F. A.: Thank you too.
March 27, 2025 at 4:35 PM, duzzaman Md (MCS): All jobs have been cancelled. Thank you
March 27, 2025 at 4:36 PM, Simon Attila F. A.: Thank you for help!

Chunk 1301:
March 27, 2025 at 4:37 PM, duzzaman Md (MCS): With pleasure
March 27, 2025 at 4:38 PM, duzzaman Md (MCS): @Dariimaa/다리마/Ivancsa Could you please send the carrier AGV 01 to the Gantry input port. AGV job has already been terminated. Appreciate your support.

Chunk 1302:
March 27, 2025 at 6:10 PM, Dániel Hufnágel: Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly,Béki Norbert Modul(2): Martina Dávid, Magyar Balázs
March 27, 2025 at 7:13 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Ca Reel stk C52 “Load oversize error “ Thank you
March 27, 2025 at 7:30 PM, N.Zoli F.A.: Solved

Chunk 1303:
March 27, 2025 at 8:00 PM, Ivan Chobitko: Good evening Please check AGV L6 ST#5 Agv 4 stuck
March 27, 2025 at 9:45 PM, Simon Dávid D SL NC: @FA hello, GF NC CA megált az AGV #1 megnéznétek köszönöm
March 27, 2025 at 10:45 PM, 강진복 Kang Jinbok: It seems like the GF warehouse barcode reader is not connecting via Bluetooth. Please check. C1STKC72_M01
March 27, 2025 at 10:46 PM, 강진복 Kang Jinbok: @방혁 PM(Bang.Hyuk) FA 안녕하세요. 수동포트 바코드 리더기 블루투스 연결이 안되는것 같습니다. 확인한번 부탁드립니다.

Chunk 1304:
March 27, 2025 at 10:55 PM, N.Zoli F.A.: Solved
March 27, 2025 at 11:27 PM, 방혁 PM(Bang.Hyuk) FA: @강진복 Kang Jinbok 넵
March 28, 2025 at 1:05 AM, Simon Dávid D SL NC: @FA hello megált a VD CA oldalon a#8 AGV,megnéznètek köszónóm
March 28, 2025 at 2:24 AM, Ivan Chobitko: @fa Check please AGV 1 L6 ST
March 28, 2025 at 2:26 AM, Ivan Chobitko: Due to it’s robot stop - all AGV circulation stopped
March 28, 2025 at 2:27 AM, Zaya/ivancsa FA: solved

Chunk 1305:
March 28, 2025 at 4:51 AM, N.Zoli F.A.: @VK (mcs/rtd) Hello We need new material for assy GF ca vd C5vdc010_P04/P03 port. Thank you in advance!
March 28, 2025 at 4:54 AM, Shahbaz 샤바즈 MCS/RTD: LR is up but currently there is no lot available. Job will be created when there is an availability of Ca materials . Thank you
March 28, 2025 at 4:55 AM, N.Zoli F.A.: This message was deleted.
March 28, 2025 at 4:58 AM, N.Zoli F.A.: agv09 cannot unload 5-1 furnace

Chunk 1306:
March 28, 2025 at 4:58 AM, Shahbaz 샤바즈 MCS/RTD: AGV#09 is assigned for 5-4
March 28, 2025 at 5:00 AM, N.Zoli F.A.: Ok
March 28, 2025 at 5:00 AM, N.Zoli F.A.: Thank you
March 28, 2025 at 5:03 AM, Shahbaz 샤바즈 MCS/RTD: Now job is created for 5-1 as well.
March 28, 2025 at 5:04 AM, N.Zoli F.A.: Thank you
March 28, 2025 at 5:06 AM, Ashley🖤💚✨: L9 outside the 10AGV has stopped. I would like some help. Thank you
March 28, 2025 at 5:10 AM, Zaya/ivancsa FA: solved

Chunk 1307:
March 28, 2025 at 6:32 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 13 Technician, 1 Sl, 4 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Böröcz Tamás Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1308:
March 28, 2025 at 7:01 AM, P.Bence A SSL: Good morning please share me VD-ST warehouse full plate quantity thank you!
March 28, 2025 at 7:01 AM, Mohammad Amir: Checking!
March 28, 2025 at 7:01 AM, Mohammad Amir: Good morning!
March 28, 2025 at 7:02 AM, Mohammad Amir: This message was deleted.
March 28, 2025 at 7:06 AM, Mohammad Amir: AN-173 CA-204. Thank you very much!

Chunk 1309:
March 28, 2025 at 7:43 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 250 Cathode: 236 Pre-STK> VD Anode: 00 Cathode: 01 Post-STK > stacking Anode: 199 Cathode: 173
March 28, 2025 at 8:10 AM, Mohammad Amir: @Manufacturing Please check there are 1+1 carriers waiting. Thank you very much!
March 28, 2025 at 8:11 AM, Mohammad Amir: @FA @Nagy Tibor Please check C1CNV071_13_018,019 INV-01 RUN time error and it is blocking transfer. Thank you very much 🙏!

Chunk 1310:
March 28, 2025 at 8:12 AM, Mohammad Amir: C1CNV072_M01**.
March 28, 2025 at 8:36 AM, Mohammad Amir: @FA @Nagy Tibor Please check C1STKA72_22 there is INV02 Run Time over error and blocking materials recovery. Thank you very much!
March 28, 2025 at 8:54 AM, KIM SEYEON [김세연]_FA: @김대웅 Kim Daewung 피엠님 금일 노칭 양극 5.6라인 티칭 점검 예정되어 있는데 후창고 자재가 ㄴ양극 173개 ㄴ음극 199개 입니다. 우선 메일 드린대로 진행할 계획이나 혹시 문제 있으시면 말씀부탁드립니다.
March 28, 2025 at 8:55 AM, 김대웅 Kim Daewung: 진행하시면 되겠습니다

Chunk 1311:
March 28, 2025 at 8:57 AM, Mohammad Amir: @FA @Nagy Tibor Please check E0CNVA52_07_002 There is Data Mismatch Error. Thank you very much!
March 28, 2025 at 8:57 AM, Mohammad Amir: It is blocking reels delivery. Please check on priority. Thank you very much!
March 28, 2025 at 9:01 AM, Hồng Anh SL NC&VD 1F: Pls check for mc 6/1 AN NC. This MC long time dont have empty mgz. Pls check.
March 28, 2025 at 9:05 AM, Mohammad Amir: Checking

Chunk 1312:
March 28, 2025 at 9:06 AM, Mohammad Amir: There is an active LR at 8:47 however currently there is no material available. Thank you very much!
March 28, 2025 at 9:07 AM, Mohammad Amir: Materials currently not available at the Gantry O/P ports as soon as material will be available jobs will be created. Thank you very much!
March 28, 2025 at 9:09 AM, Hồng Anh SL NC&VD 1F: Ok i got it. Thank you so much.
March 28, 2025 at 9:09 AM, Mohammad Amir: You are welcome!

Chunk 1313:
March 28, 2025 at 9:58 AM, 최정한.KOVA invited 민수.
March 28, 2025 at 9:59 AM, 최정한.KOVA: This message was deleted.
March 28, 2025 at 10:07 AM, 최대운: @KIM SEYEON [김세연]_FA @김대웅 Kim Daewung 현재 양극 5라인 생산 잠시 중단 중으로 확인되어 티칭 점검 진행하겠습니다. 생산 진행시 오퍼레이터분과 현장에서 협의하여 진행하도록 하겠습니다.
March 28, 2025 at 11:16 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 246 Cathode: 243 Pre-STK> VD Anode: 01 Cathode: 03 Post-STK > stacking Anode: 184 Cathode: 168

Chunk 1314:
March 28, 2025 at 11:37 AM, Mohammad Amir: @FA @Nagy Tibor Please check LTA0024 located at E0STKA51_P01 it is not moving and causing traffic on the CNVA52. Thank you very much!
March 28, 2025 at 11:37 AM, Mohammad Amir: From MCS/RTD side everything is fine ✅. Please check physically. Thank you very much!
March 28, 2025 at 11:49 AM, Mohammad Amir: @FA Please take this error in consideration,almost whole return CNV E0CNVA52 is full. Thank you very much!

Chunk 1315:
March 28, 2025 at 12:02 PM, Mohammad Amir: @FA @Nagy Tibor Please check C1CNV072_16_146 there is INV-01 Runtime Over error and it is causing stacking materials transfer delay. Thank you very much!
March 28, 2025 at 1:04 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 252 Cathode: 245 Pre-STK> VD Anode: 01 Cathode: 00 Post-STK > stacking Anode: 171 Cathode: 165

Chunk 1316:
March 28, 2025 at 2:02 PM, Hồng Anh SL NC&VD 1F: Pls request AGV come to chamber 41(5-5) AN for take out and put in plate again. Now plate wrong position.
March 28, 2025 at 2:30 PM, Badamaa/Ivancsa FA: solved
March 28, 2025 at 2:54 PM, 최대운: 5라인은 티칭 점검 완료 하였습니다. 6-3은 생산 중이 아니여서 남은 시간 6-3까지 마무리 하도록 하겠습니다. 명일도 6-1, 6-2 한번에 작업 할 수 있게 해주시면 빨리 끝낼수 있을것 같습니다.
March 28, 2025 at 2:59 PM, Mohammad Amir: @FA @Nagy Tibor Please check E0STKC51_C01 there is Fork#1 Sew emergency stop. Thank you very much!

Chunk 1317:
March 28, 2025 at 3:14 PM, Hồng Anh SL NC&VD 1F invited Nguyên.
March 28, 2025 at 3:31 PM, Mohammad Amir: @FA @Nagy Tibor Please check E0STKC51_C01 there is MCP mode error. Thank you very much!
March 28, 2025 at 3:33 PM, Nagy Tibor: @Mohammad Amir 1F -en tevékenykedem
March 28, 2025 at 3:33 PM, Mohammad Amir: Please forward it to your GF colleague. Thank you very much!

Chunk 1318:
March 28, 2025 at 3:40 PM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 261 Cathode: 257 Pre-STK> VD Anode: 00 Cathode: 02 Post-STK > stacking Anode: 161 Cathode: 152
March 28, 2025 at 4:11 PM, 최대운: @KIM SEYEON [김세연]_FA @김대웅 Kim Daewung @강기훈 금일 GF 노칭 양극 5라인 및 6-3까지 티칭 점검 완료 하였습니다. 명일도 남은 6-1,6-2 진행토록 하겠습니다. 입출고 포트는 오토로 전환하였습니다.
March 28, 2025 at 4:51 PM, Hữu Thắng invited QuangPhan.
March 28, 2025 at 5:29 PM, 김형주: Please check AGV number 8 on line 6

Chunk 1319:
March 28, 2025 at 5:29 PM, KIM SEYEON [김세연]_FA: 감사합니다
March 28, 2025 at 5:32 PM, 인제(Hwang): @Mohammad Amir Please delete the LR job assigned to VD Ca 5-6. The chamber is in manual operation
March 28, 2025 at 5:32 PM, Mohammad Amir: Checking
March 28, 2025 at 5:32 PM, 인제(Hwang): AGV#2
March 28, 2025 at 5:33 PM, Mohammad Amir: Jobs have been cancelled successfully ✅. Thank you very much!
March 28, 2025 at 5:37 PM, 인제(Hwang): Thank you!
March 28, 2025 at 5:37 PM, Mohammad Amir: You are welcome!

Chunk 1320:
March 28, 2025 at 6:11 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Ca reel stk C51_C01 “Load oversize error “ Thank you

Chunk 1321:
March 28, 2025 at 6:23 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 9+2/11(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(2+1): Pálosi Róbert, Kovács Ágnes, (+Radics András) Sick(0): --------------- Electrode3): Szabadi Miki, Kiss Balázs, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Denkó János --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- A technikusok elosztás

Chunk 1322:
March 28, 2025 at 6:37 PM, Csanálosi Gábor FA: @Pintye Miklós FA.
March 28, 2025 at 6:45 PM, Csanálosi Gábor FA: Done
March 28, 2025 at 6:45 PM, Pintye Miklós FA.: Solved
March 28, 2025 at 6:47 PM, M.Ferenc "B"Nc/Vd SL: Notching, anód oldalon meg tudnátok nézni, miért nem jönnek kifelé a reel-ek?
March 28, 2025 at 6:50 PM, Csanálosi Gábor FA: Az 52-es hibában volt, most részünkről rendben van.
March 28, 2025 at 7:03 PM, M.Ferenc "B"Nc/Vd SL: Köszi!

Chunk 1323:
March 28, 2025 at 8:18 PM, M.Ferenc "B"Nc/Vd SL: Notching katódon L6 mellett, az egyik reel kiadó port-on nem jön kifelé reel. Meg tudjátok nézni miért?
March 28, 2025 at 8:24 PM, Shahbaz 샤바즈 MCS/RTD: @FA Please check Ca reel stk C52_C02 “Load oversize error “ Thank you
March 28, 2025 at 8:26 PM, Shahbaz 샤바즈 MCS/RTD: There is a job for CNVC52_M01 from StK C52 but currently STKC52 is OOS, CNVC_M02 is in manual mode and CNVC_M03 is occupied.

Chunk 1324:
March 28, 2025 at 8:27 PM, Toponary Csaba: Hi. I bumped into AGV #7 on Stacking Line 5 and it stopped there sorry
March 28, 2025 at 9:39 PM, Rácz Dániel / FA: @termelés segítségét szeretném kérni a cathode 6-4 VD géphez köszönöm.
March 28, 2025 at 9:41 PM, Rácz Dániel / FA: Plate ID probléma

Chunk 1325:
March 29, 2025 at 6:10 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl ———————————— Electrode (3): Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1326:
March 29, 2025 at 7:39 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 333 Cathode: 328 Pre-STK> VD Anode: 03 Cathode: 01 Post-STK > stacking Anode: 89 Cathode: 78
March 29, 2025 at 8:39 AM, 강기훈: 금일 예정대로 오전 10시부터 GF 노칭 6-1, 6-2 AGV 티칭점검 진행예정이며, 바쁘시겠지만 설비 비생산 부탁드립니다. 매번 작업진행에 도움주셔서 감사합니다 종료 후 공유 드릴 수 있도록 하겠습니다
March 29, 2025 at 10:01 AM, 강기훈: 해당 구간 에이지비 티칭작업 시작하겠습니다 빠른 종료하여 생산 진행할 수 있도록 하겠습니다

Chunk 1327:
March 29, 2025 at 10:04 AM, Mohammad Amir: Next LOT quantity available GF Pre-STK > Notching Anode: 344 Cathode: 336 Pre-STK> VD Anode: 02 Cathode: 00 Post-STK > stacking Anode: 65 Cathode: 64
March 29, 2025 at 11:12 AM, Mohammad Amir: @FA @Vékony Ferenc Please check E0STKC51_C02 there is Travel Driver error. Thank you very much!

Chunk 1328:
March 29, 2025 at 11:56 AM, Mohammad Amir: @FA @Vékony Ferenc Please check E0STKC52_B02 there is track sensor detection Abnormalities,it is causing on job to be delayed. Thank you very much!
March 29, 2025 at 12:10 PM, 강기훈: GF NC 양극 6-1, 6-2 에이지비 티칭점검 작업 완료하였습니다 업무에 도움 주셔서 감사합니다
March 29, 2025 at 1:51 PM, P.Bence A SSL: We have problem NC CA side reel not coming please check .
March 29, 2025 at 1:51 PM, Mohammad Amir: Checking

Chunk 1329:
March 29, 2025 at 1:53 PM, Mohammad Amir: @FA @Vékony Ferenc Please check E0STKC52_C01/C02 is ideal without error and it causing delay in materials recovery and delay. There is shortage of reels for Line-5. Thank you very much!
March 29, 2025 at 3:29 PM, Mohammad Amir: Issue has been resolved ✅ Reels on the way. Thank you very much!

Chunk 1330:
March 29, 2025 at 5:01 PM, Mohammad Amir: @FA @Vékony Ferenc Please check E0CNVA52_RTV01 RTV unload start dear unload not busy time over it is causing stoppage in dilivery. Thank you very much!
March 29, 2025 at 6:00 PM, Hữu Thắng: @MCS Could u please check RTV . We didn’t recieve any material for a while . Thank u

Chunk 1331:
March 29, 2025 at 6:03 PM, Mohammad Amir: @FA Please check LTC0997 at E0CNVC52(9052) it is not moving and causing reels delivery to stopped. Everything is fine from MCS/RTD side. ✅ Thank you very much!
March 29, 2025 at 6:35 PM, Baek Hojong(백호종)FA: Solved
March 29, 2025 at 6:36 PM, VK (mcs): @FA Please check Cathode reel STK C51 There is no error but cranes are stopped.
March 29, 2025 at 6:38 PM, Rácz Dániel / FA: OMW
March 29, 2025 at 6:49 PM, Baek Hojong(백호종)FA: Solved

Chunk 1332:
March 29, 2025 at 7:01 PM, Rácz Dániel / FA: @VK (mcs) E0CNVA52_07_047 please add new destination 7023. Thank you !
March 29, 2025 at 7:03 PM, VK (mcs): LTA0831 still job exists in MCS and CCS
March 29, 2025 at 7:03 PM, Rácz Dániel / FA: New destination: E0CNVA52_BP05
March 29, 2025 at 7:05 PM, Rácz Dániel / FA: The reel trays not moving.
March 29, 2025 at 7:13 PM, Csanálosi Gábor FA: Yes. Pls delete that job and add a new order to get the reel a new destination, what is missing now.

Chunk 1333:
March 29, 2025 at 7:13 PM, VK (mcs): Yes I see, error was data mismatch
March 29, 2025 at 7:19 PM, Hữu Thắng: @MCS Could u please check NC AN RTV . There’s no reels provide for us . Thank u
March 29, 2025 at 7:20 PM, Csanálosi Gábor FA: @VK (mcs) thank you, it worked.
March 29, 2025 at 7:20 PM, VK (mcs): There was an issue in CNV, now it solved. Material will deliver soon.
March 29, 2025 at 7:21 PM, VK (mcs): Most welcome

Chunk 1334:
March 29, 2025 at 7:34 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.29 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 29, 2025 at 7:42 PM, VK (mcs): @FA Please check Cathode reel STK C51 There is no error but cranes are stopped.
March 29, 2025 at 7:46 PM, Csanálosi Gábor FA: There is a slitt conv. problem (solution in progress) eitch is blocked the cranes

Chunk 1335:
March 29, 2025 at 7:57 PM, Debreczeni Ármin: Hello @VK (mcs) Can you share lot quantity both side please?
March 29, 2025 at 8:05 PM, VK (mcs): Next LOT available GF Pre-STK> notching Anode: 357 cathode: 358 Pre-STK > VD Anode: 03 Cathode: 01 Post-STK > stacking Anode: 42 Cathode: 25
March 29, 2025 at 8:14 PM, Csanálosi Gábor FA: Sorted out
March 29, 2025 at 8:21 PM, Ngoc zia invited Lan Nhi.

Chunk 1336:
March 29, 2025 at 9:05 PM, VK (mcs): Can you please check it again, it seems same issue. Cranes are stopped. E0STKC51
March 29, 2025 at 9:06 PM, Szücs Géza FT-B: STK no have error
March 29, 2025 at 9:10 PM, VK (mcs): Yes there is no error but the cranes frozen ( In active stop )
March 29, 2025 at 9:12 PM, Szücs Géza FT-B: no, technicians homeing STK in manual mode
March 29, 2025 at 9:22 PM, Csanálosi Gábor FA: Done

Chunk 1337:
March 29, 2025 at 10:34 PM, VK (mcs): @FA Please check Anode reel STK A51. Order status in SCS remained for 2nd crane (29712)! It seems carriers already transferred!
March 29, 2025 at 10:40 PM, Jun(정우준)_SKOH FA: are you talking about LTA 1153, LTA1217??
March 29, 2025 at 10:42 PM, VK (mcs): LTA1417, Carrier is M04 -OP01 in SCS But in MCS it's still in M04
March 29, 2025 at 10:44 PM, VK (mcs): And LTA0757. But this one already solved by OP action as I see. And now its normal.

Chunk 1338:
March 29, 2025 at 10:48 PM, Csanálosi Gábor FA: Yup, that was me
March 29, 2025 at 10:50 PM, VK (mcs): Thank you
March 29, 2025 at 10:50 PM, Csanálosi Gábor FA: LTA1417 just picked up by the crane
March 29, 2025 at 10:50 PM, VK (mcs): I see, thanks
March 29, 2025 at 10:51 PM, Jun(정우준)_SKOH FA: is it okay now?
March 29, 2025 at 10:51 PM, VK (mcs): Yes, both are fine now. Thx
March 29, 2025 at 11:08 PM, Rácz Dániel / FA: B01-es átadó porton van a hiba a tálca nem ment át.

Chunk 1339:
March 29, 2025 at 11:13 PM, Csanálosi Gábor FA: This message was deleted.
March 29, 2025 at 11:52 PM, VK (mcs): @FA Please check Cathode reel STK C51
March 30, 2025 at 1:53 AM, Hữu Thắng: @MCS . Could u please check NC CA RTV . There’s no material provide
March 30, 2025 at 1:55 AM, VK (mcs): Materials are on the way.
March 30, 2025 at 4:32 AM, Debreczeni Ármin: Can you send me GF fresh status?

Chunk 1340:
March 30, 2025 at 4:44 AM, VK (mcs): Next LOT available GF Pre-STK> notching Anode: 350 cathode: 353 Pre-STK > VD Anode: 03 Cathode: 03 Post-STK > stacking Anode: 32 Cathode: 15
March 30, 2025 at 5:00 AM, 이한웅(삼구): Please check the Anode NC warehouse manual port.
March 30, 2025 at 5:02 AM, 이한웅(삼구): @Baek Hojong(백호종)FA PM님 전/후창고 확인 부탁드립니다.
March 30, 2025 at 5:18 AM, Hữu Thắng: @FA VD CA AGV #8 was stopped . Plz check it

Chunk 1341:
March 30, 2025 at 5:34 AM, Hữu Thắng: @MCS . Could u please RTV - NC CA . We didn’t recieved material for a while .
March 30, 2025 at 5:37 AM, Debreczeni Ármin: When reel warehouse will be working?
March 30, 2025 at 5:37 AM, VK (mcs): Currently there is an issue in most STKs
March 30, 2025 at 5:39 AM, Hữu Thắng: @MCS . VD AN 5/8 there are 2 plates . Could u plz check it . Thank u
March 30, 2025 at 5:45 AM, VK (mcs): There is issue in STKs please wait. Needs synchronization. Thx

Chunk 1342:
March 30, 2025 at 5:45 AM, Hữu Thắng: Thanks u
March 30, 2025 at 5:56 AM, Debreczeni Ármin: Somebody can share with us how long time the service was taken?
March 30, 2025 at 6:08 AM, Hữu Thắng: @MCS Could u please make priority GF NC CA side please . We will run out of material soon . Thank you
March 30, 2025 at 6:16 AM, (Unknown): Due to the change in time zone there is issue in STKs please wait. Needs synchronization. Thank you very much

Chunk 1343:
March 30, 2025 at 6:18 AM, Mr.Miti (미티) FA: Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(6): Kovács Szabolcs István Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ————————————

Chunk 1344:
March 30, 2025 at 6:22 AM, (Unknown): @FA Good morning Please check E0STKC51, it's paused. There are a lot of pending. Thank you very much.
March 30, 2025 at 6:30 AM, Mr.Miti (미티) FA: @(Unknown) Good morning! C1STKC72_72_P11_OP01 There is an full plate but no job. Please check
March 30, 2025 at 6:30 AM, (Unknown): Checking
March 30, 2025 at 6:30 AM, Mr.Miti (미티) FA: Thank you sir!

Chunk 1345:
March 30, 2025 at 6:35 AM, (Unknown): Could you please confirm if the carrier ID is MLC3181? And for your information C1STKC72_P11_OP01 port is OutOfService.
March 30, 2025 at 6:51 AM, 인제(Hwang): NC An Robot#1, Robot#2 Error
March 30, 2025 at 6:54 AM, Yon Ko/연커/: NC Ca Robot2 DETECT SENSOR ERROR check it.
March 30, 2025 at 7:22 AM, Mr.Miti (미티) FA: Yes it is

Chunk 1346:
March 30, 2025 at 7:37 AM, (Unknown): @FA Good morning Please check E0STKC51_C01. It's OutOfService because of Fork#1 Load Position Error when Active. Thank you very much.
March 30, 2025 at 7:39 AM, Yon Ko/연커/: @MCS VD AN 5-7, 5-8 please check this half chambers. Thank u!
March 30, 2025 at 7:39 AM, (Unknown): Checking
March 30, 2025 at 7:40 AM, Yon Ko/연커/: @MCS sorry VD CA 6-9 chamber check too thank u.

Chunk 1347:
March 30, 2025 at 7:49 AM, (Unknown): For 5-7 There are active jobs. 5-8 there is no carrier at chamber but there is transport job for Port P01 P02
March 30, 2025 at 8:00 AM, (Unknown): There are jobs for CA 6-9 P03_P04. Please wait. Thank you very much
March 30, 2025 at 8:01 AM, Yon Ko/연커/: Thanks for information

Chunk 1348:
March 30, 2025 at 8:08 AM, (Unknown): @FA @VD Please check VD AN 6-9. Is Port P01 empty? MLA0130 job was created and according to MCS rail-transfer completed 6:52. But after that there was RackInValidRequest from at 6:53 for this carrier at C1STKA71_P22.
March 30, 2025 at 8:18 AM, (Unknown): @FA @SCC Two jobs are in transferring state from 1 hour because Dest 6029, 6030 ports: output H/S off Please check Thank you very much

Chunk 1349:
March 30, 2025 at 8:47 AM, (Unknown): @FA Please check E0STKC51_C02. It's OutOfService because of "Fork#2 SEW Emergency Stop (code 14)" Thank you very much.
March 30, 2025 at 8:52 AM, P.Bence A SSL: GF ca side full reel not coming please check ..
March 30, 2025 at 8:56 AM, (Unknown): E0STKC51 is OutOfService. And the operation are working on it. Thank you very much

Chunk 1350:
March 30, 2025 at 9:25 AM, (Unknown): Hi, Please Press LR from VD AN 5-8, The previous transport job has been terminated by storage OP action. Thank you very much
March 30, 2025 at 9:59 AM, Yon Ko/연커/: @(Unknown) Could you check the VD CA 6-1 chamber, please? It only has one plate inside (MlC2211).
March 30, 2025 at 10:02 AM, P.Bence A SSL: Hi please check anode VD 5-8 machine only half chamber

Chunk 1351:
March 30, 2025 at 10:03 AM, (Unknown): Please Press LR from VD AN 5-8, The previous transport job has been terminated by storage OP action. Thank you very much
March 30, 2025 at 10:06 AM, (Unknown): There is a Alternated job from MCS but there is no TransportJobCommand and in SCS side as well there is no job transfer command
March 30, 2025 at 10:09 AM, (Unknown): Please transfer the MLC2211 by manual transfer command and then request for LR. I will cancel the existing junk jobs

Chunk 1352:
March 30, 2025 at 10:15 AM, P.Bence A SSL invited Barta Rudi.
March 30, 2025 at 10:17 AM, (Unknown): Could you please check VD CA 5-2 Port P04 is empty. Please transfer the MLC2042 which is at P03 by manual transfer command and request for LR. Thank you very much
March 30, 2025 at 11:10 AM, P.Bence A SSL: L5-6 ca material not coming please check !
March 30, 2025 at 11:11 AM, P.Bence A SSL: Stacking all ca Agv empty

Chunk 1353:
March 30, 2025 at 11:11 AM, P.Bence A SSL: @(Unknown) please Tell me how many full plate VD-ST warehouse
March 30, 2025 at 11:14 AM, (Unknown): Currently there is no material available on conyver There are jobs from STK to conyver. Once they reached to the conyver output port job will be created for line 5,6
March 30, 2025 at 11:15 AM, (Unknown): CA 16 An 21
March 30, 2025 at 11:21 AM, 인제(Hwang): GF NC Ca Robot#2 Error

Chunk 1354:
March 30, 2025 at 12:15 PM, (Unknown): Please transfer the MLC2211 by manual transfer command and then request for LR.
March 30, 2025 at 12:16 PM, (Unknown): Pease check VD CA 5-2 Port P04 is empty. Please transfer the MLC2042 which is at P03 by manual transfer command and then request for LR. Thank you very much

Chunk 1355:
March 30, 2025 at 12:34 PM, (Unknown): @FA @VD Please check VD AN 6-8. The chamber is not full There is only one carrier MLA0117 at P01. The other transport jobs were terminated by storage OP action. Please transfer MLA0117 by manual transfer command. And then Press LR. Thank you very much.
March 30, 2025 at 12:39 PM, (Unknown): Please also check VD AN 6-9. Port P01 empty Please transfer MLA4023 which is at P02 by manual transfer command and then Press LR. Thank you very much for the support

Chunk 1356:
March 30, 2025 at 12:43 PM, Zaya/ivancsa FA: These chambers are already closed. 6-8,6-9 The materials seem to be in the process of drying. @(Unknown)
March 30, 2025 at 1:06 PM, (Unknown): @FA The conyver C1CNV072 on STK line 5, 6 side is OutOfService. Please check Thank you very much
March 30, 2025 at 1:52 PM, P.Bence A SSL: L5-6 ca full mgz not coming please check warehouse

Chunk 1357:
March 30, 2025 at 1:56 PM, (Unknown): There is no material available on conyver There are two jobs from STK to conyver output port. Once they reach the port job will be created for line 5,6
March 30, 2025 at 2:02 PM, (Unknown): @FA Please check MLC0001, MLC2186 StorageCarrierTransferReply is okay but the carrier is not moving. Thank you very much
March 30, 2025 at 2:11 PM, P.Bence A SSL: L6 stacking Agv 10 stop check please thank you !

Chunk 1358:
March 30, 2025 at 2:14 PM, P.Bence A SSL: VD ca sode Agv 1 stop before 6-10 chamber
March 30, 2025 at 2:22 PM, 김형주: Please check the warehouse crane VD
March 30, 2025 at 2:26 PM, Poluekto Serhii: L6 stacking Agv 10 stop check please thank you !
March 30, 2025 at 2:29 PM, (Unknown): @FA The conyver C1CNV072 on STK line 5, 6 side is OutOfService. Please check Thank you very much

Chunk 1359:
March 30, 2025 at 5:09 PM, (Unknown): @FA Please check E0STKC51_C02. It's OutOfService because of "Fork#1 Load oversize error when Active" Thank you very much.
March 30, 2025 at 5:14 PM, Eduard SL Shift A: Line 6 ST #20 AGV 8 stopped please check
March 30, 2025 at 5:30 PM, Yon Ko/연커/: @MCS @Aaqib (MCS/RTD) Could you check the VD CA 6-1 chamber, please? It only has two plate inside so long time.
March 30, 2025 at 5:34 PM, (Unknown): Currently There is no material available

Chunk 1360:
March 30, 2025 at 5:34 PM, Hồng Anh SL NC&VD 1F: Pls request AGV unloading 2 plate in chamber 6-1 CA.
March 30, 2025 at 5:41 PM, (Unknown): There is active LR once material will be available job will be created automatically
March 30, 2025 at 6:07 PM, M.Ferenc "B"Nc/Vd SL: @FA GF VD Ca #42 (5-6) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later.

Chunk 1361:
March 30, 2025 at 6:09 PM, M.Ferenc "B"Nc/Vd SL: GF VD CA #46(6-1) There are only 2 plates in the machine. The AGV did not continue loading. Please check.
March 30, 2025 at 6:14 PM, M.Ferenc "B"Nc/Vd SL: @FA NC AN Reel conveyor error. (Tray data mismatch error). Please check it.

Chunk 1362:
March 30, 2025 at 6:16 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(5): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián, Gégény Dávid --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János ---------

Chunk 1363:
March 30, 2025 at 6:34 PM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 1364:
March 30, 2025 at 6:58 PM, M.Ferenc "B"Nc/Vd SL: @FA GF VD An #53 & #54 (6-8 & 6-9) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later.
March 30, 2025 at 8:32 PM, M.Ferenc "B"Nc/Vd SL: @FA GF VD CA #43(5-7) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later.

Chunk 1365:
March 30, 2025 at 10:07 PM, VK (mcs): @FA Please check Anode reel STK A51
March 30, 2025 at 11:01 PM, VK (mcs): @FA Please check Cathode pre-STK C71 port 8 (8085) it's out of service!
March 30, 2025 at 11:30 PM, Csanálosi Gábor FA: Solved
March 31, 2025 at 1:32 AM, Tumruu/투머르/IvancsaFA: @Kertész Dániel pls com st
March 31, 2025 at 1:37 AM, Szücs Géza FT-B: az szép
March 31, 2025 at 1:37 AM, Rácz Dániel / FA: IS

Chunk 1366:
March 31, 2025 at 1:37 AM, Szücs Géza FT-B: Jó estét! Good evening! "B" műszak, 11+3/11(+1) Tech, 1Sl Overtime(3): Fabriczius Gergely, Gégény Dávid, Kertész Dániel Holiday(+1): (+Radics András) Sick(0): --------------- Electrode(4): Rácz Dániel, Kertész Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Fabriczius Gergely --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Gégény Dávid --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó

Chunk 1367:
March 31, 2025 at 1:41 AM, Kertész Dániel: Sorry, but tonight I'm on the electrode:(
March 31, 2025 at 2:30 AM, 이한웅(삼구): please check NC Ca #3 Robot
March 31, 2025 at 2:48 AM, Csanálosi Gábor FA: Done
March 31, 2025 at 3:59 AM, Debreczeni Ármin: @Jun(정우준)_SKOH FA 03.31 an magazines storage will be under maintenence or stopped any reason? We heard about something but not sure. I just need information and told to my leaders. Thank you

Chunk 1368:
March 31, 2025 at 4:02 AM, Szücs Géza FT-B: Logisztikai gépek nem álltak. A VD utáni raktárban annyi áru volt, amennyi éppen a VDről jött.
March 31, 2025 at 4:03 AM, Debreczeni Ármin: Nem most. Hanem hogy 31.-én lesz e valami megállas az anode raktárban. Halottunk valami tervezettről csak nem vagyunk benne biztosak.
March 31, 2025 at 4:03 AM, Szücs Géza FT-B: jah értem, bocs

Chunk 1369:
March 31, 2025 at 4:06 AM, Jun(정우준)_SKOH FA: hello :) as i know, we don't have any maintenance at 03.31. if you tell me, who told you that, I will check again.
March 31, 2025 at 4:08 AM, Debreczeni Ármin: Tihor Lajos got somekind of information but only the date and AN storage is affected that's all.
March 31, 2025 at 4:10 AM, Jun(정우준)_SKOH FA: I see. We don't have any warehouse maintenance planned for tomorrow morning. Instead, we'll be shutting down the STK for an inventory check.

Chunk 1370:
March 31, 2025 at 4:18 AM, Debreczeni Ármin: Thank you
March 31, 2025 at 4:27 AM, 이한웅(삼구): This message was deleted.
March 31, 2025 at 4:27 AM, 이한웅(삼구): PM님 이거 GF 노칭 Anode 물동량 테스트 물어보는거 같습니다.

Chunk 1371:
March 31, 2025 at 5:59 AM, Dániel Hufnágel: Jó reggelt! FA "D" műszak:8/12 Overtime (0):- Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(2): Magyar Balázs, Nagy Gábor
March 31, 2025 at 6:23 AM, Elena SL: @Dániel Hufnágel Good morning. I need a technician. The reels feed has stopped. GF NC AN ( tray data mismatch ERROR)

Chunk 1372:
March 31, 2025 at 6:23 AM, Elena SL: Tray abnormal error 01
March 31, 2025 at 6:38 AM, Nguyen Huy invited Cao thi my linh.
March 31, 2025 at 6:39 AM, 김지수PM(Gyuri)_FA: Sziasztok Day shift FA Technician Schedule Date: 2025.03.31 Time:06:00-18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen
March 31, 2025 at 7:14 AM, 김수민: @mcs Plz check Next lot available

Chunk 1373:
March 31, 2025 at 7:20 AM, Shakir (MCS): Next lot available GF Pre-STK > notching Anode :341 Cathode:364 Pre-STK> VD Anode: 00 Cathode:03 Post-STK> stacking Anode: 57 Cathode: 10
March 31, 2025 at 8:59 AM, 최정한.KOVA: GF 음극 서브배럴 비워주세요.
March 31, 2025 at 8:59 AM, 최정한.KOVA: VD입니다
March 31, 2025 at 9:00 AM, 최정한.KOVA: VD 음극 5-1 ,2,3,4,5,6,7,6-3

Chunk 1374:
March 31, 2025 at 9:20 AM, Dániel Hufnágel: @Shakir (MCS) Good morning! Can you check me please van plate? The ID mukber is UNK250330224954889LG. Its causing lazy carrier error, show up in AGV#4 at stacking CA side, but that machine is working well only the error stuck in the ACS
March 31, 2025 at 9:28 AM, (Unknown): MLC3043 has been assigned to AGV#4. The current location of the mentioned UNK.. Id is NA. And last log view says CarrierDataRemove

Chunk 1375:
March 31, 2025 at 9:54 AM, Ivan Chobitko: @fa please check AGV 10 stuck between 5 and 6 ST line
March 31, 2025 at 12:18 PM, Ivan Chobitko: @fa Please check AGV 8 stuck near L6 ST9
March 31, 2025 at 1:04 PM, Ivan Chobitko: @fa Please check AGV 7 Line 6 ST 5
March 31, 2025 at 1:09 PM, Elena SL: @fa Please send transport for the finished material AN VD #47
March 31, 2025 at 1:47 PM, Ivan Kasian Sl 5L 🥹: @fa check please agv#6 Stack area Charging time out Thank you

Chunk 1376:
March 31, 2025 at 3:17 PM, Yon Ko/연커/ invited Selem /Ivancsa FA, Uyanga FA, Nandia FA, 가나, Amgaa FA, Chinges Fa and Geri FA.
March 31, 2025 at 4:10 PM, Shakir (MCS): Next lot available GF Pre-STK > notching Anode :341 Cathode:376 Pre-STK> VD Anode: 02 Cathode:03 Post-STK> stacking Anode: 51 Cathode: 04
March 31, 2025 at 4:11 PM, Ivan Chobitko: L6 ST We have slow material supply Can you please tell reason?

Chunk 1377:
March 31, 2025 at 4:12 PM, Shakir (MCS): There is two job exist for line6 ST, its on the way agv#6,7 has been assigned. Further monitoring Thank you
March 31, 2025 at 4:16 PM, (Unknown): Could you please confirm if there is any carrier at CNV P11? Thank you very much
March 31, 2025 at 4:17 PM, Ivan Chobitko: P11 empty P12 have 2 AN plate
March 31, 2025 at 4:21 PM, (Unknown): @FA @CCS Please Check MLC3108. It has a destination for P11. But it's circulating in the CNV. Thank you very much.

Chunk 1378:
March 31, 2025 at 4:27 PM, Dániel Hufnágel: By the CCS its has another dest and its 16092
March 31, 2025 at 4:28 PM, Dániel Hufnágel: This is why its circulating
March 31, 2025 at 4:30 PM, (Unknown): Please cancel the job in CCS and transfer the carrier by manual transfer command. Thank you very much
March 31, 2025 at 4:33 PM, (Unknown): While checking in CCS the Source is 16092 and Destination is 16013
March 31, 2025 at 4:35 PM, Dániel Hufnágel: Now it has been modifed, we are just waiting!

Chunk 1379:
March 31, 2025 at 4:37 PM, Shakir (MCS): The carrier reached the destination P11 ✅. Thank you
March 31, 2025 at 4:38 PM, Dániel Hufnágel: Yes!
March 31, 2025 at 6:13 PM, 이한웅(삼구): Hello. Please send the plate in VD chamber 5-3(#39) to STK warehouse manually by AGV. There is a machine problem and it needs to be checked. Thank you.
March 31, 2025 at 6:13 PM, 이한웅(삼구): Anode

Chunk 1380:
March 31, 2025 at 6:42 PM, VK (mcs): @FA Please check Anode reel STK A51 LTA0468 is in temporary storage and waiting for a while. Carrier aborted by storage at 10:30:24 due to port interface error! Please store it in zone. Thx
March 31, 2025 at 6:46 PM, T. Gàbornè C SL NC: @FA Please check GF AN NC waiting empty mgz 5#2 , 5#1 please check. Thx
March 31, 2025 at 6:48 PM, VK (mcs): For both ports, job assigned

Chunk 1381:
March 31, 2025 at 7:05 PM, Jun(정우준)_SKOH FA: Night Shift FA Technician Schedule Date: 2025.Mar.31 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong 3. Noémi
March 31, 2025 at 7:26 PM, 이한웅(삼구): @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA 안녕하세요. An #2로봇이 매거진 손잡이를 누르고 있습니다. 확인 부탁드립니다.
March 31, 2025 at 7:38 PM, VK (mcs): @FA Please check Cathode reel STK C51
March 31, 2025 at 7:52 PM, Denkó Jani (F.A.): Korean technicians are looking into the cause of the error, please be patient. Thank you.

Chunk 1382:
March 31, 2025 at 8:04 PM, KIM SEYEON [김세연]_FA: @정다은 @삼구 조장님 GF 릴창고 작업시작해도 되나요? 생산 릴은 다 출고 하셨는지요?
March 31, 2025 at 8:07 PM, Yaroslav SL/C 6 line: Hello everyone @mcs/rtd please check port ST 6/1 Ca’ station. We push load request 20 minutes ago, but AGV not bring mgz. @fa please check buttons on this station, buttons and indicator do not work. Thanks
March 31, 2025 at 8:09 PM, VK (mcs): There is no available cathode material

Chunk 1383:
March 31, 2025 at 8:11 PM, VK (mcs): Next LOT available GF Pre-STK> notching Anode:344 Cathode:379 Pre-STK> VD Anode:00 Cathode:00 Post-STK> stacking Anode:44 Cathode:00
March 31, 2025 at 8:56 PM, Yaroslav SL/C 6 line: @mcs Please share available lot
March 31, 2025 at 9:07 PM, VK (mcs): Next LOT available GF Pre-STK> notching Anode:342 Cathode:383 Pre-STK> VD Anode:03 Cathode:03 Post-STK> stacking Anode:52 Cathode:18
March 31, 2025 at 9:07 PM, Yaroslav SL/C 6 line: Thank you

Chunk 1384:
March 31, 2025 at 9:08 PM, T. Gàbornè C SL NC: @Fa please check CA 5-9 Chamber door left up /down cylinder NG Thx
March 31, 2025 at 9:10 PM, 이한웅(삼구): This message was deleted.
March 31, 2025 at 9:13 PM, Denkó Jani (F.A.): A VD gépek nem az F.A. -hoz tartoznak . Szerintem ez a termelési karbantartáshoz tartozik.
March 31, 2025 at 9:13 PM, T. Gàbornè C SL NC: Sory no FA Dear Technician SL Please check the chamber. Thx

Chunk 1385:
March 31, 2025 at 10:24 PM, VK (mcs): @FA Please check Anode reel STK A51 LTA0468 (0201104) is in temporary storage. Please transfer it to the zone. April 1, 2025 at 2:08 AM April 1, 2025 at 2:08 AM, Kateryna SSL C : Hello everyone! @fa AGV#6 stoped near ST L6, check please April 1, 2025 at 2:21 AM, Skwarek Tibor : This message was deleted. April 1, 2025 at 2:25 AM, Denkó Jani (F.A.) : Solved April 1, 2025 at 4:58 AM, Dima Kusyk : @mcs Hello everyone! Please, check how much we have plates Ca. Thanks! April 1, 2025 at 5:00 AM, VK (mcs) : Do you mean available plates to process? April 1, 2025 at 5:00 AM, Dima Kusyk : Yes, please April 1, 2025 at 5:04 AM, VK (mcs) : Next LOT available GF Pre-STK> notching Anode:386 Cathode:428 Pre-STK> VD Anode:00 Cathode:00 Post-STK> stacking Anode:00 Cathode:02 April 1, 2025 at 5:27 AM, VK (mcs) : @FA Is there any inspection in anode reel STK A51 now? April 1, 2025 at 5:43 AM, Noémi (소미) : It is working now April 1, 2025 at 5:47 AM, Yaroslav SL/C 6 line : @fa AGV#4 stopped near 6 line ST#16, please fix it. Thanks April 1, 2025 at 5:49 AM, Dániel Hufnágel : Good morning! Yes beacuse someone put plate and magasine manually on port! You have to clear that port! April 1, 2025 at 5:54 AM, Yaroslav SL/C 6 line : Done April 1, 2025 at 5:55 AM, Dima Kusyk : @fa Line 5/STK16 AGV2 stopped, please, check it. Thanks! April 1, 2025 at 5:55 AM, Dániel Hufnágel : Same problem as line#6 April 1, 2025 at 6:25 AM, 김지수PM(Gyuri)_FA : Sziasztok Day shift FA Technician Schedule Date: 2025.04 01 Time:06:00-18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen April 1, 2025 at 6:26 AM, Tumruu/투머르/IvancsaFA : Pls come st cat AGV acs problem bang hyuk April 1, 2025 at 6:27 AM, Tumruu/투머르/IvancsaFA : GF st cat April 1, 2025 at 6:28 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:8/12+1 overtime Overtime (1): Boromisza Zoltán Sick (4):Nagy Zsolt, Kasztel Balázs, Oláh András, Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(2) Szabadi Miklós, Martina Dávid Assembly(4): Novák Zoltán, Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Boromisza Zoltán April 1, 2025 at 6:36 AM, 방혁 PM(Bang.Hyuk) FA : @제조 @김수민 @최근종(Choi Geunjong) 스택 스테이션에 화물 있는데 LR눌러서 발생한 에러 입니다. 재고실사 어떻게 진행하고 계신건지 공유 부탁드립니다 April 1, 2025 at 6:37 AM, 김지수PM(Gyuri)_FA : Isn't there already cargo in the chamber? It seems like there is cargo in chamber April 1, 2025 at 7:18 AM, 김수민 : 현지 인원들이 진행하는것 같아서 저희도 따로 전달 받은내용 없습니다. 피엠님 일단 현지 요청으로 노칭 5,6라인 가동 시작했습니다 April 1, 2025 at 7:24 AM, 방혁 PM(Bang.Hyuk) FA : 재고실사는 끝난건가요? April 1, 2025 at 7:35 AM, 최근종(Choi Geunjong) : ST 재고실사 진행하고있습니다 April 1, 2025 at 7:42 AM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 395 Cathode: 434 Pre-STK> VD Anode: 00 Cathode: 01 Post-STK > stacking Anode: 00 Cathode: 00 April 1, 2025 at 8:10 AM, KIM SEYEON [김세연]_FA : ST에서 생산하고 있나요? April 1, 2025 at 8:16 AM, 최근종(Choi Geunjong) : 재고실사 진행중으로 생산 안하고있습니다 April 1, 2025 at 8:35 AM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 GF VD 양극 챔버 6_4 6_6 6_9에 실물있는지 확인후 공유 부탁드립니다 April 1, 2025 at 8:36 AM, 김지수PM(Gyuri)_FA : 6-4, 6-9 비워져있고 6-6 실물있는데 AGV로 빼려하고 있습니다. April 1, 2025 at 8:37 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다 April 1, 2025 at 8:40 AM, Sazzad Bhai SKon : @FA Please rack out these three duplicated plates and restock. DUP250330040640106FG (C1STKA72, 0105403); DUP250330045659160LR (C1STKA72, 0100203); DUP250330025547042DM (C1STKA72, 0205403); reason for duplicated state: manual job was created by this name from VD to STK Auto port. April 1, 2025 at 9:25 AM, 최정한.KOVA : VD 음극 5-3. 히터#2 TOP RIGHT 고장입니다. 교체필요합니다. April 1, 2025 at 9:26 AM, 최정한.KOVA : 상기 원인으로 D1504.7 온도 상하한 리미트초과알람 발생하였습니다. April 1, 2025 at 9:29 AM, 김수민 : 과장님 한국진공 그룹챗에 올려주셔야 테크니션 리더가 확인 가능합니다 April 1, 2025 at 9:29 AM, 최정한.KOVA : 네 알겠습니다 April 1, 2025 at 10:01 AM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 374 Cathode: 413 Pre-STK> VD Anode: 01 Cathode: 01 Post-STK > stacking Anode: 00 Cathode: 00 April 1, 2025 at 11:54 AM, Ivan Chobitko : Hello. Please share the number of plates available for ST April 1, 2025 at 11:56 AM, Sazzad Bhai SKon : Anode cathode both are 0 April 1, 2025 at 12:39 PM, Sazzad Bhai SKon : @SCS Please reconcile the STK. The carrier location is NA, so next lot is 0 April 1, 2025 at 12:42 PM, Elena SL : @Dániel Hufnágel @FA Hello CA VD ST warehouse overhead crane is stopped. Please check. (ERROR) April 1, 2025 at 1:20 PM, Dániel Hufnágel : @Mohammad Amir Can you check me please MLC3232? It has an order but something wrong. Az i see in the SCS the order atteched to the wrong crane(C72) April 1, 2025 at 1:21 PM, Mohammad Amir : Checking April 1, 2025 at 1:24 PM, Mohammad Amir : There is no job for this carrier,it is currently located at C2STKC72_M01. Last job was at 5:01 from Z01 to M01_C2STKC72 and it has completed at 5:07. Where you would like to send this carrier ? Thank you very much! April 1, 2025 at 1:25 PM, Dániel Hufnágel : Give me a minute i have to check it once again(shocked) April 1, 2025 at 1:26 PM, Mohammad Amir : Sure , please inform if you want me to transfer it somewhere! April 1, 2025 at 1:27 PM, Dániel Hufnágel : Sure, I was wrong! In the SCS has an order for MLC0152 from 16036 to manual port 9018(thats physicly empty!) April 1, 2025 at 1:28 PM, Mohammad Amir : Checking April 1, 2025 at 1:29 PM, Mohammad Amir : So you mean C1STKC72_M01 is empty in reality? April 1, 2025 at 1:31 PM, Dániel Hufnágel : Yes April 1, 2025 at 1:32 PM, Mohammad Amir : Thank you very much for the information! April 1, 2025 at 1:32 PM, Dániel Hufnágel : You are welcome! April 1, 2025 at 1:35 PM, Mohammad Amir : Location has modified. Working in rest . April 1, 2025 at 1:41 PM, Dániel Hufnágel : Can you check me who create MNL2025040144025MLC0152 job? April 1, 2025 at 1:41 PM, Mohammad Amir : Checking April 1, 2025 at 1:41 PM, Dániel Hufnágel : That carrier still not moving and in the SCS say unload complete April 1, 2025 at 1:42 PM, Dániel Hufnágel : And i can not delete that job April 1, 2025 at 1:42 PM, Mohammad Amir : We are checking April 1, 2025 at 1:51 PM, Mohammad Amir : It was created by an operator at 4:40 . Thank you very much! April 1, 2025 at 2:06 PM, Mohammad Amir : We have remake the order but it is not moving we are receiving Hack-5 response from SCS side it means job already exists that's why new job can not created. @SCS could you please check this issue. Thank you very much! April 1, 2025 at 2:29 PM, duzzaman Md (MCS) : @FA Please check EOCNVC52 There is OP maint call on error April 1, 2025 at 2:36 PM, Dániel Hufnágel : We were inside! April 1, 2025 at 2:36 PM, Dániel Hufnágel : Now we done! April 1, 2025 at 2:37 PM, Mohammad Amir : Thank you very much! April 1, 2025 at 2:39 PM, Dániel Hufnágel : Welcome! April 1, 2025 at 2:45 PM, Badamaa/Ivancsa FA : pls check gf notching ca robot #1 detect seonsor off error April 1, 2025 at 2:54 PM, Novák Károly F. A. : Done April 1, 2025 at 3:19 PM, Ivan Chobitko : Hello AGV 6 brought CA material to L6 ST But AGV atation from morning full Check it please April 1, 2025 at 3:19 PM, Mohammad Amir : Checking April 1, 2025 at 3:20 PM, Ivan Chobitko : if I tell you near which machine the AGV station is empty, will you reassign the task?? April 1, 2025 at 3:20 PM, Mohammad Amir : Please tell me Carrier id , thank you very much! April 1, 2025 at 3:20 PM, Mohammad Amir : I am checking! April 1, 2025 at 3:20 PM, Ivan Chobitko : L6 ST11 have please for cathode April 1, 2025 at 3:20 PM, Dániel Hufnágel : Just take off that plates!! April 1, 2025 at 3:21 PM, Ivan Chobitko : MLC3136 April 1, 2025 at 3:21 PM, Dániel Hufnágel : Night shift workors fill up the line manualy... April 1, 2025 at 3:21 PM, Mohammad Amir : Checking April 1, 2025 at 3:21 PM, Ivan Chobitko : but what should we do now? April 1, 2025 at 3:21 PM, Dániel Hufnágel : Its not our system problem, it simple just manual infeed April 1, 2025 at 3:22 PM, Dániel Hufnágel : Just take that plates on manual car thats are on AGV port April 1, 2025 at 3:22 PM, Dániel Hufnágel : Sad but now have to do this operators April 1, 2025 at 3:22 PM, Ivan Chobitko : Can we cancel ALL task for AGV ? to stop this in the future? April 1, 2025 at 3:23 PM, Dániel Hufnágel : Nope. It will cause more problem April 1, 2025 at 3:25 PM, Mohammad Amir : For this carrier ,Job was created automatically after receiving LR form C6STM190__P01 at 15:00. Thank you very much! April 1, 2025 at 3:26 PM, Mohammad Amir : It is currently on AGV#5 . Thank you very much! April 1, 2025 at 3:27 PM, Mohammad Amir : AGV#6** April 1, 2025 at 3:28 PM, Dániel Hufnágel : @Ivan Chobitko operators have to clear all the port where AGV s stop emergency error April 1, 2025 at 3:30 PM, Ivan Chobitko : our stations are full since the morning. We didn't call anything, now the robots continue to go. Even if requests were made somewhere, I think; we need to cancel them April 1, 2025 at 3:32 PM, Ivan Chobitko : our operators hardly called, there was no cathode material in the warehouse, now - it is there and I think this is the reason why they started to go April 1, 2025 at 3:33 PM, Ivan Chobitko : at stations where there is material, it is impossible to make a new request April 1, 2025 at 3:36 PM, Mohammad Amir : Currently there is one material available for Cathode. Thank you very much! April 1, 2025 at 3:37 PM, Dániel Hufnágel : @Ivan Chobitko just please keep clearing ports and use magasines from nanual car April 1, 2025 at 3:38 PM, Ivan Chobitko : now all the cathode that is there has arrived, please cancel the loading request at the stations wherever it is April 1, 2025 at 3:39 PM, Ivan Chobitko : This message was deleted. April 1, 2025 at 3:40 PM, Ivan Chobitko : we don't have enough carts to unload the anode as well, because if there was a request somewhere, I suspect it was made everywhere April 1, 2025 at 3:41 PM, Elena SL : Hello !!! We need a transport Nc AN 6/2. AGV don’t take full mgz. April 1, 2025 at 3:41 PM, Ivan Chobitko : at night the requests were made because for the inventory everything must be available April 1, 2025 at 3:42 PM, Elena SL : 6/1 6/2 April 1, 2025 at 3:42 PM, Mohammad Amir : Checking April 1, 2025 at 3:42 PM, Elena SL : there is also no supply of empty magazines April 1, 2025 at 3:43 PM, Mohammad Amir : Checking April 1, 2025 at 3:46 PM, Mohammad Amir : Please press UR for both machines 6-1 and 6-2. Thank you very much! April 1, 2025 at 3:49 PM, Elena SL : I did it. but the anode does not move. all robots stopped without signals April 1, 2025 at 3:53 PM, Mohammad Amir : @FA @Dániel Hufnágel @ACS Please check MA6286 this empty magazine has job to go to line -5 -3_P03 but for this AGV is not being assigned for last 14:33. Location:-C0PVA020_P13. From MCS/RTD everything seems okay. Please check on sight. Thank you very much! April 1, 2025 at 3:54 PM, Mohammad Amir : For 6-2 Empty magazine on the way with AGV#6. There are active LR from 6-1 but currently there is no material available on O/P port of Gantry . Thank you very much! April 1, 2025 at 3:55 PM, Mohammad Amir : Checking April 1, 2025 at 3:55 PM, Elena SL : Thank you for your supporting 🙂 April 1, 2025 at 3:56 PM, Mohammad Amir : You are welcome! April 1, 2025 at 3:58 PM, 최근종(Choi Geunjong) : ST 6라인 13호기 스테이션 AGV 9호기 정지 상태입니다 다른 AGV 이송 막고 있습니다 확인 부탁드립니다 April 1, 2025 at 3:58 PM, Mohammad Amir : For 6-1 NC AN UR Job, AGV#9 has been assigned to do the task but it is not moving since 14:26. @FA @ACS please check this issue. Thank you very much! April 1, 2025 at 4:02 PM, Mohammad Amir : 6-2** April 1, 2025 at 4:04 PM, Mohammad Amir : For 6-2 there is already UR job exists and it is not getting completed because of ACS issue i informed ACS technicians. For 6-1 please press UR we didn't receive any UR in recent time. Thank you very much! April 1, 2025 at 4:04 PM, Elena SL : I'm standing next to this AGV 9 it's stopped... no movement no alarm signal. April 1, 2025 at 4:06 PM, Mohammad Amir : Yes AGV#9 is causing the issue. As i see now we received Transfer resumed information. I am monitoring this situation. Thank you! April 1, 2025 at 4:08 PM, 김동완 : @mcs 현재 GF ST 양극에 명령 확인 부탁드립니다 많은 AGV들이 스테이션에 자재가 있는데 왔습니다 April 1, 2025 at 4:11 PM, Mohammad Amir : Currently there are 6 command active for GF Stacking. And 4 materials on the AGVs and two are waiting for AGV at CNV output port. Thank you very much! April 1, 2025 at 4:13 PM, Mohammad Amir : Sir, For you information:- We have Active load request from 5-5,5-7,5-8,5-15 but currently no materials available so job did not get created. As soon as material will be available, jobs will be created for those machines as well. Thank you very much! April 1, 2025 at 4:15 PM, Mohammad Amir : Please inform us what should we do with these LR . Thank you very much! April 1, 2025 at 4:15 PM, Dániel Hufnágel : The problem is operators still manually feeding the stacking ports.... April 1, 2025 at 4:17 PM, Ivan Chobitko : Why have I never seen this with my own eyes? I don't want to say that they can't lie - of course they can. But I talked to everyone - no one touched April 1, 2025 at 4:18 PM, Ivan Chobitko : the line is down almost the whole day. April 1, 2025 at 4:18 PM, Dániel Hufnágel : Maybe, the still not right, but all this problem come from manual infeed April 1, 2025 at 4:20 PM, Ivan Chobitko : what should I do then if it was done on the night shift? first of all we need to use the material near the line April 1, 2025 at 4:29 PM, Elena SL : 6/1 Nc AN still full of finished goods. AGV not coming April 1, 2025 at 4:31 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA @Mohammad Amir 음극 노칭 6-1,2/ 5-1 - 12mgz 풀 스테이션인데 AGV UR진행이 안되고 있습니다 확인부탁드립니다 April 1, 2025 at 4:31 PM, Mohammad Amir : Please press UR we didn't receive UR yet. Thank you very much! April 1, 2025 at 4:32 PM, 김수민 : AN NC April 1, 2025 at 4:32 PM, Mohammad Amir : Checking Sir ! April 1, 2025 at 4:34 PM, Mohammad Amir : Sir, Could you please UR once again for all three machines. Thank you very much! April 1, 2025 at 4:38 PM, Yulya Kirsanova : Hello. Agv#7 stopped with error near Staсking Line 5/18 Please check @fa Thank you so much. April 1, 2025 at 4:43 PM, Elena SL : I try April 1, 2025 at 4:43 PM, Mohammad Amir : Please tell me once you done. Thank you very much! April 1, 2025 at 4:44 PM, Elena SL : I did this on all the MC , waiting for the result April 1, 2025 at 4:44 PM, Mohammad Amir : UR recived successfully at 16:42 . Job has created ✅. Thank you very much! April 1, 2025 at 4:45 PM, Mohammad Amir : Please do it for 5-1 and 6-1 a as well,now we should receive UR. Thank you very much! April 1, 2025 at 4:45 PM, Elena SL : hurray! it worked!! thanks! April 1, 2025 at 4:46 PM, Mohammad Amir : You are welcome! Other will also work ,press UR please. I am checking. Thank you! April 1, 2025 at 4:46 PM, duzzaman Md (MCS) : @FA Kindly check C2STKA71 There's light curtain error. Thanks! April 1, 2025 at 4:48 PM, Mohammad Amir : For 6-1 Also UR received successfully ✅. Job created. April 1, 2025 at 4:48 PM, Elena SL : Now #7 AGV stop near 5/2 anode April 1, 2025 at 4:48 PM, Elena SL : Now work April 1, 2025 at 4:49 PM, Elena SL : All CA good April 1, 2025 at 4:49 PM, Mohammad Amir : For 5-1 NC AN UR received successfully at 16:43. Job created ✅. April 1, 2025 at 4:50 PM, Elena SL : Error April 1, 2025 at 4:53 PM, duzzaman Md (MCS) : @FA Please check E0STKC52_C02 There is Load oversize Error (right) Thanks April 1, 2025 at 4:57 PM, Mohammad Amir : AGV#6 has assigned and it has stopper 01 Unit FWD time over. @FA check it. Thank you very much! April 1, 2025 at 4:57 PM, duzzaman Md (MCS) : @FA Also kindly check E0CNVA52_RTV01 There's RTV Unload not busy time over April 1, 2025 at 5:00 PM, Dániel Hufnágel : Just a moment April 1, 2025 at 5:32 PM, Tumruu/투머르/IvancsaFA : Gf vd cat pord 5-9 Is it okay to take it by hand? April 1, 2025 at 5:45 PM, 김범준 : VD AN #8 AGV Stopped check plz April 1, 2025 at 5:46 PM, 김범준 : N,C AN #10 stopped check plz April 1, 2025 at 6:35 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 2025.Apr Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 1, 2025 at 6:40 PM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing @FA Please remove the remaining plate from the following VD An machines: •VD An 5-8 P01 •VD An 6-6 P01 Also, LR for the half chambers: •VD An 5-4 •VD An 6-10 Thank you. April 1, 2025 at 6:55 PM, Ynja/ivancsa FA : VD AN 6-6 is empty April 1, 2025 at 6:57 PM, Shahbaz 샤바즈 MCS/RTD : In MCS it is showing “MLA4072” there, If it is empty, I will update it. Please confirm. Thank you. April 1, 2025 at 6:57 PM, 안진모 An Jin Mo invited 안종수, 전 운 (Jeon Woon), 조한진(Jin), 조범희 and 송민기(Song MinKi). April 1, 2025 at 7:22 PM, Shahbaz 샤바즈 MCS/RTD : Please LR again for VD An 6-6 Thank you. April 1, 2025 at 8:21 PM, T. Gàbornè C SL NC : Sziasztok Megtudnátok nézni CA oldalon az M04-05-06 portokra miért nem kapunk reeleket? Köszönöm szépen April 1, 2025 at 8:22 PM, Gégény Dávid : Jelenleg az egyik daru hibában van, dolgozom rajta April 1, 2025 at 8:54 PM, Kertész Dániel : Az M04-es portot nem fogjátok tudni használni, mert folyamatos hibákat generált a raktárban, ezért le lett állítva. April 1, 2025 at 8:57 PM, T. Gàbornè C SL NC : Köszönöm az információt. April 1, 2025 at 9:00 PM, Dima Kusyk : @fa Hello everyone! Line 5/STK11 AGV5 stopped, please check. Thanks! April 1, 2025 at 9:02 PM, 이한웅(삼구) : 동일 위치에서 동일 현상 발생했습니다. 재확인 부탁드립니다. @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA April 1, 2025 at 9:10 PM, Jun(정우준)_SKOH FA : 네 확인하겠습니다. April 1, 2025 at 10:13 PM, 이한웅(삼구) : Please check NC Ca #1 Robot April 2, 2025 at 12:52 AM April 2, 2025 at 12:52 AM, T. Gàbornè C SL NC : @Fa Sziasztok NC CA oldalon nem jönnek a reelek, van valami javítás alatt? Köszönöm az információt April 2, 2025 at 1:09 AM, T. Gàbornè C SL NC : @Fa Sziasztok Nézzetek rá a CA Robot #1-re megállt. Köszönöm April 2, 2025 at 1:15 AM, Kertész Dániel : Már hozza is a reel-eket! April 2, 2025 at 1:47 AM, T. Gàbornè C SL NC : @Fa Sziasztok Nézzetek rá a CA Robot #3-re megállt. Köszönöm April 2, 2025 at 1:49 AM, Kertész Dániel : Kesz is April 2, 2025 at 2:32 AM, T. Gàbornè C SL NC : This message was deleted. April 2, 2025 at 2:32 AM, T. Gàbornè C SL NC : Sziasztok @Fa CA reel raktár M05 portnál elakadt a tray vissza felé, megnéznétek? Köszönöm szépen April 2, 2025 at 3:09 AM, T. Gàbornè C SL NC : @fa Légyszíves nézzétek meg miért nem hoz üres mgz az AGV CA oldalra. Köszönöm szépen April 2, 2025 at 3:12 AM, Kertész Dániel : @Shahbaz 샤바즈 MCS/RTD Hello, please can you check this? April 2, 2025 at 3:17 AM, T. Gàbornè C SL NC : AGV #1 and AGV #3 now empty mgz. April 2, 2025 at 3:20 AM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD Could you check why the material flow is so slow at the anode 51 warehouse? The entire conveyor is full of material... Maybe you see something I didn't notice... Txs. April 2, 2025 at 3:22 AM, Simon Attila F. A. : Even if crane 51 carries material, it only carries 1 by itself. April 2, 2025 at 3:22 AM, Shahbaz 샤바즈 MCS/RTD : Please can you check LR, There is no LR from P01,P07 of any gantry unit. April 2, 2025 at 3:33 AM, Shahbaz 샤바즈 MCS/RTD : It seems to be working normally now? I can’t see any issue either. April 2, 2025 at 3:46 AM, Simon Attila F. A. : It's starting to catch up, although crane 51 isn't picking up the material, it's been redirected to crane 52. I'm afraid if crane 51 picks it up again, it'll be slow again. April 2, 2025 at 3:49 AM, T. Gàbornè C SL NC : Please check CA AGV, CA 6#2 wait empty mgz Thx April 2, 2025 at 3:51 AM, Shahbaz 샤바즈 MCS/RTD : The transfer for LTA0310 was terminated by Storage OP action at 03:29. Before that the carriers were transferring to stocker from STKC51_P03. April 2, 2025 at 4:01 AM, Simon Attila F. A. : @Shahbaz 샤바즈 MCS/RTD thank you for help. All right now. April 2, 2025 at 4:22 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check cathode reel stocker C51 “Load position error “ Thanks April 2, 2025 at 6:03 AM, P.Bence A SSL : GF anode 5/1 FA kollégát kérnénk köszönöm April 2, 2025 at 6:13 AM, Tumruu/투머르/IvancsaFA : This message was deleted. April 2, 2025 at 6:13 AM, P.Bence A SSL : Anode side April 2, 2025 at 6:15 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 2, 2025 at 6:19 AM, P.Bence A SSL : Nc ca side Agv 9 stop 6-1 machine April 2, 2025 at 6:25 AM, 김지수PM(Gyuri)_FA : Sziasztok Day shift FA Technician Schedule Date: 2025.04 02 Time:06:00-18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen April 2, 2025 at 6:26 AM, 김수민 : @fa Plz check Ca NC ROBOT#3 April 2, 2025 at 6:47 AM, 김수민 : @fa Plz check AN NC 5-1 MGZ INPUT PORT April 2, 2025 at 6:51 AM, Novák Károly F. A. : Solved April 2, 2025 at 7:06 AM, duzzaman Md (MCS) : @FA Please check C1STKC71_P22 ERROR name : Tray data mismatch error Thanks! April 2, 2025 at 7:17 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_C01 there is Port interface error. Thank you very much! April 2, 2025 at 7:31 AM, Novák Károly F. A. : Solved April 2, 2025 at 7:34 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 8:11 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_C01/02 Light Curtain detected error(SCS). Thank you very much! April 2, 2025 at 8:22 AM, Sazzad Bhai SKon : @FA Please chech the duplicated plates: DUP250330040640106FG (C1STKA72, 0105403); DUP250330045659160LR (C1STKA72, 0100203); DUP250330025547042DM (C1STKA72, 0205403); April 2, 2025 at 8:23 AM, Novák Károly F. A. : Done April 2, 2025 at 8:23 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 8:25 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA 피엠님 이거 아직까지 조치가 안되고 있습니다 확인 한번 부탁드립니다 April 2, 2025 at 8:25 AM, 김수민 : @fa Plz check Ca NC robot#1 April 2, 2025 at 8:28 AM, 방혁 PM(Bang.Hyuk) FA : 담당 업체에게 해당 내용 전달 하였습니다 조치까지 시간이 조금 소요될것같습니다 April 2, 2025 at 8:36 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C02 there is ready off during Forking error. Thank you very much! April 2, 2025 at 8:37 AM, 김수민 : robot doesn't move April 2, 2025 at 8:39 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_P22 there is Auto step Time over error and it is blocking materials recovery. Thank you very much! April 2, 2025 at 8:42 AM, Novák Károly F. A. : Robot 1 working April 2, 2025 at 8:56 AM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 318 Cathode: 372 Pre-STK> VD Anode: 03 Cathode: 00 Post-STK > stacking Anode: 73 Cathode: 16 April 2, 2025 at 9:09 AM, Novák Károly F. A. : Done April 2, 2025 at 9:09 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 9:22 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C01 there is MCP AP Error. Thank you very much! April 2, 2025 at 9:22 AM, Mohammad Amir : C02** April 2, 2025 at 9:25 AM, Novák Károly F. A. : Checking April 2, 2025 at 9:25 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 9:26 AM, Novák Károly F. A. : @Mohammad Amir Hy. Can i help you? Mcs password reset. " The number of login have been exceeded. Please contact the admin" - error massage April 2, 2025 at 9:27 AM, Mohammad Amir : Sure,i will help you. Please share me Id. April 2, 2025 at 9:35 AM, Novák Károly F. A. : SGCA586 April 2, 2025 at 9:35 AM, Novák Károly F. A. : Solved April 2, 2025 at 9:35 AM, Mohammad Amir : Thank you very much! April 2, 2025 at 9:35 AM, Mohammad Amir : Working on it! April 2, 2025 at 9:37 AM, Mohammad Amir : Issue has been resolved ✅. You can use the same password to login again. Thank you very much! April 2, 2025 at 9:41 AM, Novák Károly F. A. : Thank you very much! April 2, 2025 at 9:41 AM, Mohammad Amir : You are welcome! If you face any other issue please inform me. April 2, 2025 at 10:20 AM, Mr.Miti (미티) FA : @Mohammad Amir Hello! Please reset TEMP RTD password 🥹 April 2, 2025 at 10:21 AM, Mohammad Amir : This message was deleted. April 2, 2025 at 10:21 AM, Mohammad Amir : Jó Reggelt, Unfortunately we don't have access to RTD admin anymore ,so i cannot help you,I am sorry. @RTD Admin please check this issue. Thank you very much! April 2, 2025 at 10:22 AM, Mr.Miti (미티) FA : Thank you! April 2, 2025 at 10:22 AM, Mohammad Amir : You are welcome! April 2, 2025 at 11:21 AM, 안진모 An Jin Mo : Please Reset RTD Password. ID : Temp Thank you so much April 2, 2025 at 11:23 AM, Mohammad Amir : Good Afternoon Sir, Unfortunately we don't have access to RTD admin anymore so we can not help you,I am sorry. @RTDAdmin please check this issue. Thank you very much! April 2, 2025 at 12:15 PM, Mohammad Amir : @Manufacturing Please check there are 1+3 carriers waiting. Thank you very much! April 2, 2025 at 12:17 PM, Atom Yang(MCS/RTD) : I will update it. @안진모 An Jin Mo 초디화 후에 답변드리겠습니다. April 2, 2025 at 12:22 PM, Atom Yang(MCS/RTD) : 초기화 요청 대상 ID가 TEMP 가 맞을지요? April 2, 2025 at 12:23 PM, Atom Yang(MCS/RTD) : Temp 로는 조회되지 않습니다. April 2, 2025 at 12:27 PM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 314 Cathode: 372 Pre-STK> VD Anode: 02 Cathode: 01 Post-STK > stacking Anode: 70 Cathode: 02 April 2, 2025 at 12:31 PM, P.Bence A SSL : Ca side Nc Agv 8 stop 6-3 machine April 2, 2025 at 12:49 PM, 안진모 An Jin Mo : 넵 맞습니다. 감사합니다! April 2, 2025 at 12:49 PM, Atom Yang(MCS/RTD) : The password of this user was reset. April 2, 2025 at 1:43 PM, P.Bence A SSL : L5-6 stacking full mgz not coming what is the problem ? April 2, 2025 at 1:43 PM, Mohammad Amir : Checking April 2, 2025 at 1:49 PM, Mohammad Amir : For Line -5 , Three material jobs already created ,one material is on the AGV#2. For Line-6, We received LR from multiple machines however currently reply is no lot search as there is no material available at O/P ports of CNV072 as soon as materials are arriving at O/P ports of CNV072 jobs are getting created. Everything seems fine ✅ We are monitoring the process for smooth transfer. Thank you very much! April 2, 2025 at 1:52 PM, Mohammad Amir : For Line-5 and Line-6 Available materials in Post VD warehouse:- AN-65 CA-8 April 2, 2025 at 2:05 PM, Mohammad Amir : @FA Please confirm is there any maintenance on C1STKC72 ,cause currently it is OOS because of open door. There is lack of Cathode materials in stacking area ,it will further slow down the delivery of Cathode materials to line-5 and 6 stacking. Thank you very much! April 2, 2025 at 2:07 PM, Novák Károly F. A. : @Mohammad Amir An vd machines are being repaired. 5-4, 5-7. I deleted the job and sent the material to warehouse an 72. Deleted jobs : AGV 10 (Mla1167, Mla1151), AGV 8 (Mla1246, Mla4166), AGV 9 (Mla4162, Mla3083), AGV 4 (Mla4174, Mla0023). The repair takes a few hours.Please generate new jobs for these materials. April 2, 2025 at 2:09 PM, Mohammad Amir : Checking April 2, 2025 at 2:15 PM, Mohammad Amir : As i checked MLA1167 located at C5VDA030_P02 and MLA1151 located at C5VDA030_P01. MLA1246 located at C1STKA71_P15 and MLA4166 located at C1STKA71 0204303. MLA4162 at C1STKA71_P16. MLA3083 at C1STKA71_0104303. MLA4174 at C1STKA71_01012024. MLA0023 at C1STKA71_0104607. So VD 5-4 AN and 5-7 is already emptied and mentioned carriers are not on the AGVs. Please check carriers id and confirm me. Thank you very much! April 2, 2025 at 2:15 PM, Novák Károly F. A. : Korean technicians are installing the warehouse. April 2, 2025 at 2:15 PM, Mohammad Amir : Thank you very much for the information! April 2, 2025 at 2:16 PM, Novák Károly F. A. : The warehouse is working again April 2, 2025 at 2:19 PM, Mohammad Amir : new location for MLA4162-C5VDA030_P03 and for MLA1246 at C5VDA030_P04. Thank you very much! April 2, 2025 at 2:23 PM, Mohammad Amir : For mentioned carriers , These carriers are already being used in process for AN VD 6-10 and 5-3. So,it is good now. Thank you very much! April 2, 2025 at 2:24 PM, Novák Károly F. A. : I thank you. April 2, 2025 at 2:24 PM, Mohammad Amir : You are welcome! April 2, 2025 at 3:18 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C02 there is Travel driver error. Thank you very much! April 2, 2025 at 3:33 PM, Mohammad Amir : This error still exists please check! Thank you very much! April 2, 2025 at 3:37 PM, Novák Károly F. A. : Checking April 2, 2025 at 3:37 PM, Mohammad Amir : Thank you very much! April 2, 2025 at 3:41 PM, Novák Károly F. A. : C51 is working again. April 2, 2025 at 3:41 PM, Mohammad Amir : Thank you very much! April 2, 2025 at 3:46 PM, P.Bence A SSL : Nc ca side Agv 3 stop please check before warehouse April 2, 2025 at 3:56 PM, 김수민 : @Mohammad Amir Please check the available materials warehouse for CA VD 4-1~9 April 2, 2025 at 3:56 PM, Mohammad Amir : Checking Sir! April 2, 2025 at 4:00 PM, Mohammad Amir : We have received LR for all the chambers 4-1~9 CA VD ,but for 4-2 ~4-9 jobs did not get created cause we don't have materials at the moment as soon as material will be available jobs will be created. For 4-1 CA VD AGV#5 just delivered the material. ✅ Currently there is just one material available. Thank you very much! April 2, 2025 at 4:13 PM, 유병일 : @정다은 피엠님 지금 gf st 4라인 생산 좀 돌리면서 오블플레이트 위에 매거진 2개만 올리고 순환물류로 보내는 상황이 많이 생기고 있다고 합니다. 작업자분들께 매거진 전부 올리고 반송해달라고 공지 한번만 부탁드리겠습니다! April 2, 2025 at 4:15 PM, 조범희 : 우크라이나 작업자들에게 다시한번 공지 진행했습니다 April 2, 2025 at 4:16 PM, 유병일 : 넵 감사합니다 April 2, 2025 at 4:25 PM, 김수민 : CA NC 5-2 아웃포트 AGV#8호기 풀매거진 UR 작업중 포크전진 상태에서 멈췄습니다 확인 부탁드립니다 April 2, 2025 at 4:28 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVC52_RTV01 is OOS and because of this reels delivery has stopped. Thank you very much! April 2, 2025 at 4:30 PM, Novák Károly F. A. : Checking April 2, 2025 at 4:31 PM, Mohammad Amir : Thank you very much! April 2, 2025 at 4:34 PM, Novák Károly F. A. : Korean technicians install it. April 2, 2025 at 4:55 PM, P.Bence A SSL : Nc ca side Agv 8 stop before warehouse . April 2, 2025 at 4:59 PM, Novák Károly F. A. : RTV01 is working again. April 2, 2025 at 4:59 PM, Mohammad Amir : Thank you very much for the confirmation! April 2, 2025 at 4:59 PM, Mohammad Amir : Reels supply has normalised ✅. April 2, 2025 at 6:08 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 2, 2025 at 6:13 PM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing @FA Please LR for VD Ca 5-1 half chamber. The job was earlier terminated by Rail Op Action. Thank you. April 2, 2025 at 6:17 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.04.02 Time:18:00-06:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen April 2, 2025 at 6:25 PM, M.Ferenc "B"Nc/Vd SL : @mcs NC CA no usable reels are coming in. Please check. April 2, 2025 at 6:32 PM, Shahbaz 샤바즈 MCS/RTD : @FA LTC1699 is not moving from E0STKC51_P02, please check. Thank you. April 2, 2025 at 6:48 PM, Csanálosi Gábor FA : I see no transfer job for it. April 2, 2025 at 6:49 PM, Shahbaz 샤바즈 MCS/RTD : In MCS the destination is BP10 April 2, 2025 at 6:50 PM, Shahbaz 샤바즈 MCS/RTD : I restarted but it was rejected with HCACK 6 “Object doesn’t exist “ Please can you confirm the location. April 2, 2025 at 6:54 PM, Csanálosi Gábor FA : Yes, there it is. April 2, 2025 at 6:59 PM, Shahbaz 샤바즈 MCS/RTD : Please check the CIM side. InterRail reply is “Object doesn’t exist “ so transfer is processing April 2, 2025 at 7:02 PM, Csanálosi Gábor FA : Now its moving April 2, 2025 at 7:03 PM, Shahbaz 샤바즈 MCS/RTD : Ok thanks. April 2, 2025 at 7:26 PM, Dmytro Poluekto : @fa Hello, for line 5/6 cathode material is not supplied, please see what is the problem April 2, 2025 at 7:30 PM, Shahbaz 샤바즈 MCS/RTD : Stacking 5/6 line next lot available: Anode : 48 Cathode : 01 April 2, 2025 at 8:02 PM, Yon Ko/연커/ : NC CA robot#2 error: MCS DATA REPORT INCOMPLETE ERROR, DATA MISMATCH ERROR check this. thank u! April 2, 2025 at 8:11 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD CA #40(5-4) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 2, 2025 at 8:32 PM, Yon Ko/연커/ : The chamber is empty now. All materials returned to STK. April 2, 2025 at 9:08 PM, M.Ferenc "B"Nc/Vd SL : @FA Agv #1 stopped near NC Ca 4-3. April 2, 2025 at 9:08 PM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) PM님 음극 4-1 매거진 아웃포트 DiverterRuntime OverError 계속 발생합니다. 확인 부탁드립니다 April 2, 2025 at 9:10 PM, 안종수 : I've completed the action. April 2, 2025 at 9:12 PM, Debreczeni Ármin : Hello Line 5 and 6 material is leaking is there any problem with storage system? April 2, 2025 at 9:21 PM, Szücs Géza FT-B : @MCS please change the carrier location. MLC0132 - C0PVC020_P04 (8040) April 2, 2025 at 9:23 PM, Shahbaz 샤바즈 MCS/RTD : Done April 2, 2025 at 9:23 PM, Szücs Géza FT-B : Thank You April 2, 2025 at 9:23 PM, Shahbaz 샤바즈 MCS/RTD : Hi, There is a lack of stacking material for 5/6 in stockers. Only materials coming from VDs are being transferred. April 2, 2025 at 9:27 PM, Debreczeni Ármin : Thank you so much i see now from the previous messages. April 2, 2025 at 9:41 PM, 안종수 : @FA NC AN 4-1 Automated OUTport TIME OVER ERROR continues to occur. Please check it. April 2, 2025 at 9:43 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check circular conveyor C1VNV072 track 16_060 “Data mismatch error “ Thank you April 2, 2025 at 9:53 PM, 인제(Hwang) : 음극 4라인 전호기 증상 동일합니다 April 2, 2025 at 9:53 PM, 안종수 : NC AN 4-1,2,3 The same phenomenon continues to occur. Diverter time out error occurs. Please check it. April 2, 2025 at 10:30 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV #10 stopped near 6-2 April 2, 2025 at 10:39 PM, M.Ferenc "B"Nc/Vd SL : @MCS Could you reset the RTD password? Someone messed it up 5 times. April 2, 2025 at 10:41 PM, Shahbaz 샤바즈 MCS/RTD : @Rácz Dániel / FA changed it earlier. Please can you help. April 2, 2025 at 10:42 PM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD we have problems with gf ca yaskawa 2 pls alternate all jobs to 1,3 April 2, 2025 at 10:45 PM, Shahbaz 샤바즈 MCS/RTD : Should I reset again? April 2, 2025 at 11:22 PM, Debreczeni Ármin : @Shahbaz 샤바즈 MCS/RTD Can I get lot quantity? April 2, 2025 at 11:25 PM, Shahbaz 샤바즈 MCS/RTD : Stacking 5/6 line next lot available: Anode : 74 Cathode : 04 April 2, 2025 at 11:28 PM, Debreczeni Ármin : Thank you April 3, 2025 at 12:14 AM April 3, 2025 at 12:14 AM, 인제(Hwang) : @Shahbaz 샤바즈 MCS/RTD Please check the available materials warehouse for Ca VD 4-1~9 & An VD 4-1~9 April 3, 2025 at 12:16 AM, Shahbaz 샤바즈 MCS/RTD : Lot available for VD 4th line: An : 0 Ca : 01 April 3, 2025 at 12:23 AM, 인제(Hwang) : Could you please tell me the plate numbers of the available Ca materials? April 3, 2025 at 12:24 AM, Shahbaz 샤바즈 MCS/RTD : MLC3080 April 3, 2025 at 12:24 AM, 인제(Hwang) : Thank you so much April 3, 2025 at 12:25 AM, Shahbaz 샤바즈 MCS/RTD : You’re welcome April 3, 2025 at 12:38 AM, Lan Nhi : @Shahbaz 샤바즈 MCS/RTD Reel is not coming from the warehouse next to L5, please check. April 3, 2025 at 12:42 AM, Shahbaz 샤바즈 MCS/RTD : Job created recently for M05, M06 from Stocker C51 and waiting for the crane to transfer them. April 3, 2025 at 12:43 AM, 이주봉PM LEE JUBONG(FA) : @인제(Hwang) Runtime 에러 지속 발생 건 조치 완료 했습니다. April 3, 2025 at 12:45 AM, Lan Nhi : yes we will wait for you to check soon April 3, 2025 at 12:53 AM, 인제(Hwang) : 확인 감사합니다! April 3, 2025 at 1:15 AM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD pls reset the alarms in mcs on gfc_nc_agv, there is no errors April 3, 2025 at 1:20 AM, Shahbaz 샤바즈 MCS/RTD : Done. April 3, 2025 at 1:20 AM, Csanálosi Gábor FA : Thank you! April 3, 2025 at 1:39 AM, M.Ferenc "B"Nc/Vd SL : @FA VD CA #37(5-1) The upper right and lower right plates were not read after insertion. Please remove the two plates with AGV so that the machine can be loaded again. April 3, 2025 at 1:40 AM, Nandia FA : okey April 3, 2025 at 1:57 AM, Debreczeni Ármin : Hello we need take out some extra empty magazine on Ca side. Somekind of problem with RTD please help us. April 3, 2025 at 2:02 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing VD Ca 5-1 The job for the half chamber was terminated by Rail Op Action. Please LR again for it. Thank you April 3, 2025 at 2:12 AM, Lan Nhi : NC AN AGV #9 agv get full magazine error at machine 5/2 April 3, 2025 at 2:19 AM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD could you pls abort transfer job for LTA1361? April 3, 2025 at 2:20 AM, Shahbaz 샤바즈 MCS/RTD : Done April 3, 2025 at 2:21 AM, Csanálosi Gábor FA : I still see it on scs, and cant abort. April 3, 2025 at 2:23 AM, Shahbaz 샤바즈 MCS/RTD : It is removed from MCS/RTD, I am unable to access SCS. April 3, 2025 at 2:24 AM, Yon Ko/연커/ : Solved. April 3, 2025 at 2:27 AM, Csanálosi Gábor FA : Solved thx April 3, 2025 at 3:31 AM, Debreczeni Ármin : Nobody? April 3, 2025 at 3:32 AM, Shahbaz 샤바즈 MCS/RTD : Sorry, what is the problem with RTD? April 3, 2025 at 3:33 AM, Debreczeni Ármin : We need take out empty magazines but @M.Ferenc "B"Nc/Vd SL got in trouble because somekind of password problem on machine April 3, 2025 at 3:33 AM, M.Ferenc "B"Nc/Vd SL : We can't log in, someone messed up the password 5 times and blocked us. April 3, 2025 at 3:34 AM, Shahbaz 샤바즈 MCS/RTD : Okay so you want to login RTD? April 3, 2025 at 3:36 AM, M.Ferenc "B"Nc/Vd SL : Yes April 3, 2025 at 3:37 AM, Shahbaz 샤바즈 MCS/RTD : Please let me know the ID, I will initiate the password reset. April 3, 2025 at 3:38 AM, M.Ferenc "B"Nc/Vd SL : TEMP April 3, 2025 at 3:39 AM, Shahbaz 샤바즈 MCS/RTD : ok, I initiated reset, please set a password. April 3, 2025 at 3:42 AM, M.Ferenc "B"Nc/Vd SL : skoh2VIP_2023! I want this as a password. April 3, 2025 at 3:44 AM, Shahbaz 샤바즈 MCS/RTD : Please check now. April 3, 2025 at 3:50 AM, M.Ferenc "B"Nc/Vd SL : I did it! Thank you! April 3, 2025 at 4:35 AM, Debreczeni Ármin : Agv number 9 stopped at line 6 ST front of machine #4 April 3, 2025 at 4:38 AM, Csanálosi Gábor FA : Kész April 3, 2025 at 4:40 AM, Debreczeni Ármin : Köszi April 3, 2025 at 5:13 AM, M.Ferenc "B"Nc/Vd SL : @FA NC E0STKC51 The crane is not moving. "Load position error". Please check. April 3, 2025 at 5:48 AM, 조한진(Jin) : Stacking 4Line AVG 5호기 정지 중 입니다. 확인 부탁드립니다. April 3, 2025 at 6:00 AM, 심재훈 : 음극 노칭 R@R 시작합니드 April 3, 2025 at 6:01 AM, 김지수PM(Gyuri)_FA : Sziasztok Day shift FA Technician Schedule Date: 2025.04 03 Time:06:00-18:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen April 3, 2025 at 6:46 AM, Hồng Anh SL NC&VD 1F : Pls check for reel warehouse CA M02 M01. Long time new reel no come. April 3, 2025 at 6:47 AM, Hồng Anh SL NC&VD 1F : Pls check for AGV 4 CA NC. April 3, 2025 at 6:48 AM, Shakir (MCS) : Reel stk CA is OOS that’s why reel is not coming. Thank you April 3, 2025 at 6:50 AM, Shakir (MCS) : @FA Please check reel STKC51, Load position error when active. Thank you April 3, 2025 at 6:52 AM, Shakir (MCS) : There are 4 jobs exist for manual ports once stk will work it will deliver the reel to the manual ports. Thank you April 3, 2025 at 6:55 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán ———————————— Assembly(4: Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 3, 2025 at 8:02 AM, Shakir (MCS) : Now the reel delivery has been normalized. Thank you April 3, 2025 at 8:05 AM, Hồng Anh SL NC&VD 1F : Thank you so much! April 3, 2025 at 8:05 AM, Shakir (MCS) : You’re welcome April 3, 2025 at 8:09 AM, 최정한.KOVA : 음극 4-8 바코드 리딩 타임아웃 발생하였습니다. April 3, 2025 at 8:13 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 확인 부탁드립니다. April 3, 2025 at 8:14 AM, 최정한.KOVA : 조치완료되었습니다 April 3, 2025 at 8:16 AM, KIM SEYEON [김세연]_FA : 문제가 무엇이었나요? April 3, 2025 at 8:18 AM, Sazzad Bhai SKon : @FA Please check the duplicated plates April 3, 2025 at 8:19 AM, 최정한.KOVA : 바코드 리더기 셋업 위치가 틀어져 있었습니다. April 3, 2025 at 8:55 AM, Hồng Anh SL NC&VD 1F : Pls request AGV come to chamber #35 (4-8)#36(4-9) CA for take out and put in plate again. Now plate wrong position. April 3, 2025 at 8:56 AM, Shakir (MCS) : @Dariimaa/다리마/Ivancsa Please transfer the plate to the stk Thank you April 3, 2025 at 8:57 AM, Khaliun/Ivancsa FA : I work here. April 3, 2025 at 8:58 AM, Shakir (MCS) : Alright Thank you. April 3, 2025 at 9:21 AM, Khaliun/Ivancsa FA : Solved April 3, 2025 at 9:27 AM, Shakir (MCS) : @Manufacturing @VD Please press LR for P03 and P04 of 4-7 AN VD and also Press LR for P03 and P04 for 4-6 AN VD. Thank you very much! April 3, 2025 at 9:30 AM, Shakir (MCS) : Next LOT quantity available GF Pre-STK > Notching Anode: 278 Cathode: 360 Pre-STK> VD Anode: 00 Cathode: 03 Post-STK > stacking Anode: 111 Cathode: 03 April 3, 2025 at 9:57 AM, 김수민 : Plz check CA NC ROBOT#2 April 3, 2025 at 9:59 AM, 방혁 PM(Bang.Hyuk) FA : 현재 자동기동불가 상태입니다. 조치까지 시간이 좀 더 소요될것같습니다 April 3, 2025 at 10:00 AM, Sazzad Bhai SKon : @Khaliun/Ivancsa FA Could you please check the duplicated plates? DUP250330040640106FG (C1STKA72, 0105403); DUP250330045659160LR (C1STKA72, 0100203); DUP250330025547042DM (C1STKA72, 0205403); April 3, 2025 at 10:41 AM, Khaliun/Ivancsa FA : Solved April 3, 2025 at 10:43 AM, Shakir (MCS) : @FA Please check reel STKC51, Load position error when active. Thank you April 3, 2025 at 11:02 AM, 심재훈 : 음극 5-3호기 메거진이 설비로 투입 안되는데 봐주실 수 있나요? April 3, 2025 at 11:10 AM, Shakir (MCS) : Hello Do you mean anode magazine 5-3, for this machine P03/P04 is OOS Thank you April 3, 2025 at 11:13 AM, Shakir (MCS) : @Fa Please check E0CNVA51_6218, IPS Sensor Align range exceeded. Thank you April 3, 2025 at 11:33 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA 양극 4-1 간헐적으로 공매거진 투입포트에서 EQ로 넘어가는 구간 메거진 원활하게 진행이 안됩니다. 업체분 확인 한번 부탁드립니다 April 3, 2025 at 11:34 AM, 방혁 PM(Bang.Hyuk) FA : 요청하겠습니다 April 3, 2025 at 11:53 AM, Hồng Anh SL NC&VD 1F : @FA team pls check for out line mc 5/1 AN. Lifter stop workinh now. April 3, 2025 at 11:54 AM, 방혁 PM(Bang.Hyuk) FA : @Mr.Miti (미티) FA pls check this April 3, 2025 at 1:02 PM, Eduard SL Shift A : Line 5 ST 14 AGV 3 stopped April 3, 2025 at 1:02 PM, Shakir (MCS) : @FA Please check E0STKC51_C02 is OOS_ Load Position Error when active, since morning this error occurs multiple times, because of this reels delivery has stopped. Thank you very much! April 3, 2025 at 1:58 PM, Shakir (MCS) : @Fa @Nagy Tibor Please check C1STKC71_M02 the carrier MLC5678 is waiting for long time. 4 other jobs are getting delayed. Thank you April 3, 2025 at 2:07 PM, P.Bence A SSL : Hello Please share me VD-ST full plate quantity thank you ! April 3, 2025 at 2:09 PM, Shakir (MCS) : CA:00 AN:89 April 3, 2025 at 2:13 PM, Shakir (MCS) : Next LOT quantity available GF Pre-STK > Notching Anode: 265 Cathode: 351 Pre-STK> VD Anode: 00 Cathode: 00 Post-STK > stacking Anode: 88 Cathode: 00 April 3, 2025 at 2:15 PM, Nagy Tibor : c1stkc71_M02_OP01 porton van a MLC5678, kérjen feladatok a darunak April 3, 2025 at 2:18 PM, Sazzad Bhai SKon : It doesn't have a job. Please place it on M02 and try to stock it in the STK April 3, 2025 at 2:37 PM, Shakir (MCS) : Next Lot available VD-ST CA : 00 AN : 88 April 3, 2025 at 2:45 PM, 김수민 : CA NC 4-3 실메거진 아웃포트 AGV#1 UR작업중 메거진 안착불량으로 에러 발생 했습니다. 확인 부탁드립니다 April 3, 2025 at 2:46 PM, 방혁 PM(Bang.Hyuk) FA : 넵 April 3, 2025 at 2:53 PM, Nagy Tibor : M02 van. de nem engedi stk tárolni. April 3, 2025 at 3:03 PM, 안진모 An Jin Mo : Please could you check the quantity available magazine at line 4? April 3, 2025 at 3:06 PM, Shakir (MCS) : Next LOT quantity available GF Pre-STK > Notching Anode: 264 Cathode: 351 Pre-STK> VD Anode: 00 Cathode: 03 Post-STK > stacking Anode: 81 Cathode: 00 April 3, 2025 at 3:22 PM, 최정한.KOVA : VD양극 4-8 안착불량입니다. 좌측 하부 플레이트 AGV 재안착해주세요 April 3, 2025 at 3:27 PM, P.Bence A SSL : Full plate ca mgz wait P07 Agv dont come please check .. April 3, 2025 at 3:29 PM, 안진모 An Jin Mo : VD An 4-9 앞 9호기 AGV 정지하였습니다 확인 주탓드립니다 April 3, 2025 at 3:29 PM, 안진모 An Jin Mo : In front of VD #4-9 the AGV machine 9 stopped. Please check April 3, 2025 at 3:29 PM, 안진모 An Jin Mo : *Anode April 3, 2025 at 3:36 PM, Shakir (MCS) : The Job was cancelled on AGV by OP action in ACS. April 3, 2025 at 3:45 PM, Shakir (MCS) : AGV#10 has been assigned, the job initiated for C6STM100_P02. Agv on the way Issue resolved ✅ Thank you April 3, 2025 at 3:45 PM, 강진복 Kang Jinbok : @FA 4Line The magazine is not being supplied. Please check. April 3, 2025 at 3:46 PM, 강진복 Kang Jinbok : Anode April 3, 2025 at 3:47 PM, Tumruu/투머르/IvancsaFA : St nc vd ? April 3, 2025 at 3:48 PM, 강진복 Kang Jinbok : Nc April 3, 2025 at 3:51 PM, Shakir (MCS) : For Line 4 job exist for empty magazines. For 4-3 agv on the way Thank you April 3, 2025 at 3:53 PM, Shakir (MCS) : Agv 05 assigned for 4-2 Agv 08 assigned for 4-3 Thank you April 3, 2025 at 3:56 PM, Shakir (MCS) : Now AGV 03 has been assigned for NC 4-1 April 3, 2025 at 4:07 PM, Shakir (MCS) : Next Lot available VD-ST CA : 02 AN : 76 April 3, 2025 at 4:41 PM, Hồng Anh SL NC&VD 1F : FA team pls check for reel warehouse CA. The new reel is provided very slowly. Now we running 3 line.pls check April 3, 2025 at 4:42 PM, Shakir (MCS) : There are job exists for line 6 reels CA. April 3, 2025 at 4:46 PM, Hồng Anh SL NC&VD 1F : Pls check for line 5 and 4 too April 3, 2025 at 4:49 PM, Shakir (MCS) : For line 5 also job exist, there are several job from STKC51 that’s why reel coming slowly April 3, 2025 at 4:51 PM, Hồng Anh SL NC&VD 1F : Thank you for your informatin! April 3, 2025 at 5:33 PM, Hồng Anh SL NC&VD 1F : Pls come to 6/1 CA for check AGV 8 unloading error. All full mgz almost fell down now April 3, 2025 at 5:37 PM, 강진복 Kang Jinbok : @FA @방혁 PM(Bang.Hyuk) FA The 4Line Outport belt has come off. Please check. April 3, 2025 at 5:38 PM, 강진복 Kang Jinbok : NC An 4-2호기 입니다. April 3, 2025 at 5:46 PM, Hồng Anh SL NC&VD 1F : Pls check soon bcs now 3 AGV stop on the way too April 3, 2025 at 5:48 PM, 김수민 : @심재훈 @JUNG WOO PARK @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA 양극 6-1 아웃포트 풀메거진 AGV#8번 UR작업중 안착실패로 실메거진 6개 다 쓰러졌습니다. 확인부탁드립니다 April 3, 2025 at 5:51 PM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) 피엠님 현장 확인 부탁드립니다. April 3, 2025 at 5:53 PM, Dmytro Poluekto : Hello everyone @fa On stack conveyor C1CNV072-CV01-MCP tray data mismatch error - please check April 3, 2025 at 6:00 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV#8 Overturned the magazines during removal in machine 6/1. Please check. April 3, 2025 at 6:01 PM, 심재훈 : 전량 폐기인가요.. April 3, 2025 at 6:02 PM, 인제(Hwang) : 쓰러진 것들도 있어서 꺼내서 확인해봐야 할 것 같습니다 April 3, 2025 at 6:05 PM, 안종수 : 조치안료 정상가동중입니다 April 3, 2025 at 6:07 PM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) 현장 확인부탁드립니다. 그대로 비가동 유지하겠습니다 April 3, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+0/12(+1) Tech, 1Sl Overtime(0): Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyis April 3, 2025 at 6:22 PM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) Ca 4-3 AGV#1 풀매거진 배출 간 매거진 위치 안착불량 기울어져있습니다. 확인 부탁드립니다 April 3, 2025 at 6:25 PM, 이주봉PM LEE JUBONG(FA) : 네 바로 가겠습니다. April 3, 2025 at 6:28 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV#1 It picked up the magazins in the wrong position on 4/3 machine. Please check. April 3, 2025 at 6:41 PM, 지석범PM (이반차FA) : 매거진 수동 취출 후, MLC4078 플레이트 에 적재 해두었습니다. 확인 한번 부탁드립니다. April 3, 2025 at 6:48 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA E0STKC51 reel warehouse craine error. (Fork#1 load position error). Please check! April 3, 2025 at 6:58 PM, Takács Ádám FA Tech invited Böröcz Tamás. April 3, 2025 at 7:09 PM, Kovács Ágnes : Kész April 3, 2025 at 7:15 PM, 전 운 (Jeon Woon) : @FA GF CA 순환컨베이어 M02 Port 정보 삭제 부탁 드립니다. April 3, 2025 at 7:22 PM, 전 운 (Jeon Woon) : @FA GF CA Please delete the M02 Port information for the circulation conveyor. April 3, 2025 at 7:31 PM, VK (mcs) : @FA Please check Anode reel STK A51 LTA1768 shelf (0201106) LTA0208 (0101104) Order Status is Crane moving. April 3, 2025 at 7:44 PM, VK (mcs) : Carriers were aborted by storage when they were on crane 2. Please check location of carriers. Is there any actual one? April 3, 2025 at 7:49 PM, VK (mcs) : Also please check LTA0559 (0201104) It has a same issue! April 3, 2025 at 7:58 PM, Debreczeni Ármin : @VK (mcs) please share me lot quantity April 3, 2025 at 8:04 PM, VK (mcs) : Next LOT available GF Pre-STK > notching Anode:262 Cathode:344 Pre-STK > VD line 4 Anode: 14 Cathode:00 Line 5&6 Anode:01 Cathode:03 Post-STK > stacking line 4 Anode:17 Cathode:18 Line 5&6 Anode:60 Cathode:00 April 3, 2025 at 8:32 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD CA #51(6-6) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 3, 2025 at 8:39 PM, VK (mcs) : @FA As I see you aborted the jobs. Thank you May I know, did you checked actual status? Is there any carrier in shelves? April 3, 2025 at 9:10 PM, 인제(Hwang) : @VK (mcs) Please check the available materials warehouse for Ca VD 4-1~9 & An VD 4-1~9 April 3, 2025 at 9:14 PM, 전 운 (Jeon Woon) : @Dmytro Poluekto Just put the 4Line Stack magazine into the machine. April 3, 2025 at 9:19 PM, Csanálosi Gábor FA : I see those shelf reserved in scs, no carriers there. Also there is no transfer list to A51 April 3, 2025 at 9:20 PM, VK (mcs) : Available material Pre-STK > VD line 4 Anode:02 Cathode:02 April 3, 2025 at 9:21 PM, 인제(Hwang) : Could you please tell me the plate numbers of the available materials? April 3, 2025 at 9:22 PM, VK (mcs) : Anode:MLA5627 and MLA2098 Cathode:MLC1054 and MLC2054 April 3, 2025 at 9:23 PM, 인제(Hwang) : Thank you so much April 3, 2025 at 9:23 PM, VK (mcs) : Can you please modify SCS?because transport job still exists in MCS. As I see jobs aborted by OP action April 3, 2025 at 9:27 PM, Csanálosi Gábor FA : I have no acces to modify shelf status April 3, 2025 at 9:28 PM, VK (mcs) : Thank you April 3, 2025 at 9:37 PM, VK (mcs) : @이주봉PM LEE JUBONG(FA) Can you please check Anode reel STK A51 LTA1768 shelf (0201106) LTA0208 (0101104) LTA0559 (0201104) Carriers aborted by OP action in SCS but status still is retrieve reserved. and according to @FA team, the shelves are empty right now. Jobs still exist in MCS. April 3, 2025 at 9:42 PM, 이주봉PM LEE JUBONG(FA) : Okay.! April 3, 2025 at 9:42 PM, 이주봉PM LEE JUBONG(FA) : Wait April 3, 2025 at 10:05 PM, Rácz Dániel / FA : E0STKC51_C02 OOS April 3, 2025 at 10:12 PM, Rácz Dániel / FA : Solved April 3, 2025 at 10:32 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Load position error April 3, 2025 at 10:43 PM, M.Ferenc "B"Nc/Vd SL : @FA VD CA C1STKC71 M01 manual port has been sitting for a long time with a plate full of magazines. Can someone check what the problem is with it? April 3, 2025 at 10:46 PM, M.Ferenc "B"Nc/Vd SL : MLC4078 April 3, 2025 at 10:48 PM, Rácz Dániel / FA : Sokvwd April 3, 2025 at 11:51 PM, Ngoc zia : NC An reel warehousing STKA51 id 6238 errror April 4, 2025 at 12:00 AM April 4, 2025 at 12:00 AM, Csanálosi Gábor FA : Done April 4, 2025 at 12:08 AM, VK (mcs) : @FA Please check Cathode reel STK C51 April 4, 2025 at 12:09 AM, Csanálosi Gábor FA : Seems like working April 4, 2025 at 12:10 AM, VK (mcs) : Cranes were frozen. Right now crane 1 is stopped April 4, 2025 at 12:11 AM, Csanálosi Gábor FA : Yup, im on it now April 4, 2025 at 12:20 AM, Csanálosi Gábor FA : Back to normal. April 4, 2025 at 12:22 AM, VK (mcs) : Thanks, Can you please check also cathode CNV C52 port 1 (9045) is in manual status April 4, 2025 at 12:30 AM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 22 (13003) is OoS! April 4, 2025 at 12:38 AM, 안종수 : NC CA #7 AGV 정지중입니다. April 4, 2025 at 12:38 AM, Csanálosi Gábor FA : Done April 4, 2025 at 12:40 AM, Csanálosi Gábor FA : Done April 4, 2025 at 12:43 AM, Csanálosi Gábor FA : Done April 4, 2025 at 1:07 AM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 22 (13003) It seems carrier ID is incorrect, MLC1220 according to MCS is in VD6/7 port 1 !! Error is input H/S off! April 4, 2025 at 1:14 AM, Debreczeni Ármin : Please share me again April 4, 2025 at 1:17 AM, VK (mcs) : Next LOT available GF Pre-STK > notching Anode:244 Cathode:303 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:02 Cathode:01 Post-STK > stacking line 4 Anode:48 Cathode:42 Line 5&6 Anode:79 Cathode:00 April 4, 2025 at 2:02 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD AN #53(6-8) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 4, 2025 at 2:41 AM, M.Ferenc "B"Nc/Vd SL : @VK (mcs) NC Ca Could you check why reels are not arriving at the ports? April 4, 2025 at 2:48 AM, Csanálosi Gábor FA : C51 hiba, jövök April 4, 2025 at 2:50 AM, VK (mcs) : @ FA Please check Cathode reel STKC51 April 4, 2025 at 2:51 AM, Szücs Géza FT-B : 2 minutes ago, FA technicians report this April 4, 2025 at 2:55 AM, Csanálosi Gábor FA : Done April 4, 2025 at 3:20 AM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca No reels are coming to ports other than L6. Can anyone check? April 4, 2025 at 3:24 AM, Csanálosi Gábor FA : Volt most egy port hiba, az kész, meglátjuk April 4, 2025 at 3:24 AM, M.Ferenc "B"Nc/Vd SL : Köszi April 4, 2025 at 3:45 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD AN #55(6-10) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 4, 2025 at 3:50 AM, Csanálosi Gábor FA : Küldtem agvket April 4, 2025 at 3:52 AM, M.Ferenc "B"Nc/Vd SL : Köszi! April 4, 2025 at 4:03 AM, 전 운 (Jeon Woon) : @MCS please GF 5,6line Check lot quantity April 4, 2025 at 4:06 AM, VK (mcs) : Next LOT available GF Pre-STK > notching Anode:258 Cathode:320 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:02 Cathode:00 Post-STK > stacking line 4 Anode:58 Cathode:42 Line 5&6 Anode:71 Cathode:01 April 4, 2025 at 4:23 AM, 전 운 (Jeon Woon) : Thx! April 4, 2025 at 4:28 AM, M.Ferenc "B"Nc/Vd SL : @FA In warehouse VD An 72, the operator reached into the light curtain at one of the ports and the delivery stopped. Please check. April 4, 2025 at 4:29 AM, M.Ferenc "B"Nc/Vd SL : @FA In warehouse VD An 72, the operator reached into the light curtain at one of the ports and the delivery stopped. Please check. April 4, 2025 at 4:29 AM, M.Ferenc "B"Nc/Vd SL : @FA In warehouse VD An 72, the operator reached into the light curtain at one of the ports and the delivery stopped. Please check. April 4, 2025 at 4:29 AM, M.Ferenc "B"Nc/Vd SL : @FA In warehouse VD An 72, the operator reached into the light curtain at one of the ports and the delivery stopped. Please check. April 4, 2025 at 4:29 AM, M.Ferenc "B"Nc/Vd SL : @FA In warehouse VD An 72, the operator reached into the light curtain at one of the ports and the delivery stopped. Please check. April 4, 2025 at 4:43 AM, Rácz Dániel / FA : Ekkora a baj ? 😅 April 4, 2025 at 4:45 AM, M.Ferenc "B"Nc/Vd SL : Kis problema volt a wifivel.😅 April 4, 2025 at 4:51 AM, M.Ferenc "B"Nc/Vd SL : AGV-k még nem érkeztek kipakolni. April 4, 2025 at 5:03 AM, Csanálosi Gábor FA : Akkor max nem jó vd géphez küldtem, mert odaértek, még láttam a Yonkoot segíteni nekik kipakolni. April 4, 2025 at 5:03 AM, M.Ferenc "B"Nc/Vd SL : Akkor az tényleg nem volt jó. April 4, 2025 at 5:04 AM, M.Ferenc "B"Nc/Vd SL : Az nem a 6-10 volt. April 4, 2025 at 5:04 AM, Csanálosi Gábor FA : Bocsi. @Böröcz Tamás légyszíves <3 April 4, 2025 at 5:22 AM, 인제(Hwang) : @VK (mcs) Please one more check the available materials warehouse for Ca VD 4-1~9 & An VD 4-1~9 April 4, 2025 at 5:23 AM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca AGV#10 stopped near 6-3 machine. April 4, 2025 at 5:26 AM, Yon Ko/연커/ : Solved April 4, 2025 at 5:26 AM, VK (mcs) : Next LOT available GF Pre-STK > notching Anode:253 Cathode:318 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:03 Cathode:01 Post-STK > stacking line 4 Anode:60 Cathode:43 Line 5&6 Anode:71 Cathode:04 April 4, 2025 at 5:27 AM, 인제(Hwang) : Thank you! April 4, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 4, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 04 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 4, 2025 at 6:25 AM, Yulya Kirsanova : Hello. Agv#1 stopped with error near Staсking Line 6/20 Please check @fa Thank you so much. April 4, 2025 at 6:50 AM, 임석호(Henry) : 안녕하세요 4라인 ST 스테이션에 LR 요청을 하려고하는데 스테이션 에 램프가 켜지지 않는 호기들이 있습니다 확인 부탁 드립니다. #16 Ca' 스테이션, #17 An' 스테이션 April 4, 2025 at 6:52 AM, Yulya Kirsanova : Hello. Agv#2 stopped with error near Staсking Line 6/17 Please check @fa Thank you so much. April 4, 2025 at 6:55 AM, Jun(정우준)_SKOH FA : 혹시 현장에 계신가요~? 정확한 위치를 현장에서 볼 수 있을까 해서요. April 4, 2025 at 7:16 AM, Jun(정우준)_SKOH FA : 확인 했습니다. April 4, 2025 at 7:29 AM, Shakir (MCS) : Next LOT available GF Pre-STK > notching Anode:249 Cathode:310 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:02 Cathode:02 Post-STK > stacking line 4 Anode:51 Cathode:40 Line 5&6 Anode:75 Cathode:00 April 4, 2025 at 7:43 AM, Simon Dávid D SL NC : @FA hello ,GF AN VD megált az AGV megnéznétek,köszönöm April 4, 2025 at 7:43 AM, Novák Károly F. A. : Melyik állt meg? April 4, 2025 at 7:44 AM, Mr.Miti (미티) FA : 04 April 4, 2025 at 7:44 AM, Novák Károly F. A. : Ok April 4, 2025 at 7:44 AM, Mr.Miti (미티) FA : 😘 April 4, 2025 at 7:47 AM, Novák Károly F. A. : Megoldva! April 4, 2025 at 8:26 AM, 송광진PM FA장비unit : @김대웅 Kim Daewung PM님 GF NC음극 후창고 125개, VD내 36개 재공대기로 총 161개 여유분이 있어 금일 9시부터 물동량 테스트 진행하도록 할게요. 노칭장비 바이패스 모드 설정 건 업체분께 전달부탁드립니다~! 물동량 테스트 일정 : 4/4 09:00-18:00 April 4, 2025 at 8:36 AM, 이한웅(삼구) : 안녕하세요. 현재 4라인 R@R 자재 혼합되어 양산 자재 실제 수량이랑 차이가 있습니다. April 4, 2025 at 8:37 AM, 김대웅 Kim Daewung : 피엠님, 재고 좀더 쌓여야 할수있을거 같습니다. 161개 플레이트면 5,6라인 12시간분량인데, 자동화테스트 9시간+VD건조 및 품질확인 5시간하면 재고부족 발생합니다 April 4, 2025 at 8:37 AM, 이한웅(삼구) : Can you tell me the quantity of material to use for 5/6 line stacking? @Shakir (MCS) April 4, 2025 at 8:37 AM, Shakir (MCS) : Checking April 4, 2025 at 8:39 AM, Shakir (MCS) : VD-ST CA:00 AN:75 April 4, 2025 at 8:40 AM, 이한웅(삼구) : 현재 음극 후창고 플레이트 수량 75개 입니다. April 4, 2025 at 8:44 AM, Shakir (MCS) : Next LOT available GF Pre-STK > notching Anode:254 Cathode:311 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:03 Cathode:02 Post-STK > stacking line 4 Anode:46 Cathode:38 Line 5&6 Anode:74 Cathode:00 April 4, 2025 at 8:47 AM, 이한웅(삼구) : Thank you! April 4, 2025 at 8:47 AM, Shakir (MCS) : You’re welcome April 4, 2025 at 9:08 AM, 최정한.KOVA : VD 음극 6-4. 온라인전환하여 LR 올리겠습니다. 진공센서 고장. 조치완료되었습니다. April 4, 2025 at 9:10 AM, Sazzad Bhai SKon : LR received but lots are not available April 4, 2025 at 9:47 AM, Shakir (MCS) : @FA Can you please check Anode reel STK A51 LTA1768 shelf (0201106) LTA0208 (0101104) LTA0559 (0201104) Carriers aborted by OP action in SCS but status still is retrieve reserved. Jobs still exist in MCS, getting delayed by long time. Thank you April 4, 2025 at 9:54 AM, Shakir (MCS) : NEXT LOT AVAILABLE VD-ST 5-6 line CA:00 AN:70 Thank you April 4, 2025 at 10:22 AM, Novák Károly F. A. : @Sazzad Bhai SKon . Gf Vd An 6-9,6-8,6-6 machines are being maintained. Please don't give these machines any tasks. Thank you. April 4, 2025 at 10:23 AM, Sazzad Bhai SKon : Okay we'll check April 4, 2025 at 10:27 AM, Shakir (MCS) : All the mentioned machine has been OOS now please let us know whenever maintenance done. Thank you April 4, 2025 at 10:29 AM, Novák Károly F. A. : Okay April 4, 2025 at 10:42 AM, 최정한.KOVA : This message was deleted. April 4, 2025 at 10:43 AM, 최정한.KOVA : 히터/SSR 교체 이력 관리를 위해 히터,SSR 교체시 해당호기와 히터 번호 한국진공 단체톡방에 공유부탁드립니다. April 4, 2025 at 10:55 AM, Ashley🖤💚✨ : Hello. #10 AGV has stopped outside L9 and 7 AGVs are requesting assistance. Thank you. April 4, 2025 at 10:57 AM, Novák Károly F. A. : @Sazzad Bhai SKon Gf Vd An 6-3 machine is also being maintained. Please do not send work to this machine. April 4, 2025 at 10:59 AM, Shakir (MCS) : VD 6-3 AN already plate inside, please remove it and send to stk. Thank you April 4, 2025 at 11:00 AM, Novák Károly F. A. : Thank you. April 4, 2025 at 11:02 AM, Shakir (MCS) : When you remove it let me know. Thank you April 4, 2025 at 11:07 AM, 최근종(Choi Geunjong) : ST 4라인 14호기 스테이션 앞 AGV 9번 알람 확인 부탁드립니다 April 4, 2025 at 11:10 AM, Sazzad Bhai SKon : "T align zone abnormal". But MCS order is normal. @AGV please check this. April 4, 2025 at 11:10 AM, Novák Károly F. A. : Sorry. 6-5 instead of 6-3. The 6-3 is working, so they don't install it. April 4, 2025 at 11:11 AM, Sazzad Bhai SKon : This chamber is full April 4, 2025 at 11:15 AM, Novák Károly F. A. : The 6-5 will finish in 36 minutes. April 4, 2025 at 11:26 AM, Shakir (MCS) : @FA Please check C1STK71_P22 is OOS, several carrier carriers waiting on CNV. Thank you April 4, 2025 at 11:26 AM, Shakir (MCS) : @Novák Károly F. A. April 4, 2025 at 11:32 AM, Novák Károly F. A. : Checking April 4, 2025 at 11:34 AM, Novák Károly F. A. : C1STKA or C1STKC? April 4, 2025 at 11:34 AM, Shakir (MCS) : cathode April 4, 2025 at 11:35 AM, Novák Károly F. A. : Okay April 4, 2025 at 12:02 PM, Novák Károly F. A. : Solved April 4, 2025 at 12:04 PM, Shakir (MCS) : @FA Please check E0STKC51_M06_OP01 Data mismatch error. Thank you April 4, 2025 at 12:07 PM, Simon Dávid D SL NC : @FA Hello NC CA oldalon nem jönnek a reelek,ránéznétek köszönöm April 4, 2025 at 12:09 PM, Simon Dávid D SL NC : Tray ID loss hiba April 4, 2025 at 12:10 PM, Novák Károly F. A. : Nézem April 4, 2025 at 12:15 PM, Novák Károly F. A. : Solved April 4, 2025 at 12:15 PM, Novák Károly F. A. : Kész. April 4, 2025 at 12:16 PM, Novák Károly F. A. : 4 reel van a porton és 1-et hoz még az c51. Mcs kollegával beszélj kérlek. April 4, 2025 at 12:20 PM, Simon Dávid D SL NC : @Shakir (MCS) hello 51-es NC CA raktárhoz tudsz küldeni reel-t ,kevés az alapanyagunk köszönóm April 4, 2025 at 12:30 PM, Shakir (MCS) : There is job exist for Line 6 and 5 . The reels on buffer ports. RTV will transferring the reels. Thank you April 4, 2025 at 1:41 PM, 임석호(Henry) : 안녕하세요 4라인 4번 AGV 이동중 저희 NG 박스와 충돌 했습니다 April 4, 2025 at 1:59 PM, 최근종(Choi Geunjong) : ST 4라인 13호기 스테이션 4번 AGV 정지상태 입니다 확인 부탁 드립니다 April 4, 2025 at 2:02 PM, Ivan Chobitko : @fa Please check AGV 6 near L6 ST he has a turning point at the wall, but he sees it as an obstacle April 4, 2025 at 2:04 PM, Shakir (MCS) : @Novák Károly F. A. VD machine 6-9,6-8,6-6 still on maintenance ? Thank you April 4, 2025 at 2:06 PM, Novák Károly F. A. : This message was deleted. April 4, 2025 at 2:06 PM, Novák Károly F. A. : Checking April 4, 2025 at 2:14 PM, Yulya Kirsanova : Hello. Agv#6 stopped with error near Staсking Line 6/20 Please check @fa Thank you so much. April 4, 2025 at 2:21 PM, Shakir (MCS) : @Novák Károly F. A. Please check the stk port E0STKA52_P01 carrier LTA1757 is not moving, several carriers are waiting on CNV. Thank you April 4, 2025 at 2:24 PM, Novák Károly F. A. : Checking April 4, 2025 at 2:26 PM, Novák Károly F. A. : 6-9 is still being repaired. 6-8 and 6-6 done. April 4, 2025 at 2:30 PM, Novák Károly F. A. : Checking April 4, 2025 at 2:31 PM, Shakir (MCS) : Alright, we changed to INSERVICE machine info in MCS for 6-6 and 6-8 ✅ . Let us know if 6-9 repair done. Thank you April 4, 2025 at 2:33 PM, 최근종(Choi Geunjong) : ST 4라인 17호기 스테이션 AGV 7번 알람 발생했습니다 확인 부탁 드립니다 April 4, 2025 at 2:37 PM, Novák Károly F. A. : Solved April 4, 2025 at 2:38 PM, Shakir (MCS) : Thank you so much April 4, 2025 at 2:38 PM, 임석호(Henry) : 안녕하세요 4라인 ST 2번 AGV 정지해 있습니다 April 4, 2025 at 2:46 PM, Shakir (MCS) : @Novák Károly F. A. Please check the stk port E0STKC52_C01 crane is not moving several carriers are waiting on CNV. Thank you April 4, 2025 at 2:47 PM, Shakir (MCS) : Crane is now moving but several carriers waiting in CNV. Thank you April 4, 2025 at 2:50 PM, Novák Károly F. A. : C01 crane is working again. April 4, 2025 at 2:52 PM, Shakir (MCS) : Please check LTA0313 carrier on Port C52_P01 for long time blocked other carriers. Thank you April 4, 2025 at 2:53 PM, Shakir (MCS) : Now issue has been resolved Thank you April 4, 2025 at 3:15 PM, Novák Károly F. A. : @Shakir (MCS) Please cancel the work of the 6-5 machine. The machine is being repaired. Gf Vd An 6-5 (The agv6, agv7 carry the material). Thanks April 4, 2025 at 3:22 PM, Shakir (MCS) : The job has been cancelled for 6-5 AN. @Khaliun/Ivancsa FA @Dariimaa/다리마/Ivancsa Please send back the carrier to stk. Agv6 and agv7 having carrier. Thank you April 4, 2025 at 3:32 PM, Novák Károly F. A. : I send back the carriers to C1STKA72. April 4, 2025 at 3:32 PM, Shakir (MCS) : Thank you so much April 4, 2025 at 4:03 PM, 임석호(Henry) : This message was deleted. April 4, 2025 at 4:03 PM, 임석호(Henry) : 안녕하세요 4라인 스택 반송가능자재 조회 부탁드립니다. April 4, 2025 at 4:04 PM, Ivan Chobitko : @Shakir (MCS) can you please share available plate count for L4? April 4, 2025 at 4:04 PM, Shakir (MCS) : On it April 4, 2025 at 4:06 PM, Shakir (MCS) : VD-ST CA: 14 AN: 21 April 4, 2025 at 4:09 PM, Shakir (MCS) : Next LOT available GF Pre-STK > notching Anode:267 Cathode:312 Pre-STK > VD line 4 Anode: 00 Cathode:00 Line 5&6 Anode:01 Cathode:00 Post-STK > stacking line 4 Anode:21 Cathode:14 Line 5&6 Anode:80 Cathode:18 April 4, 2025 at 4:15 PM, Shakir (MCS) : @Novák Károly F. A. Please check the stk port E0STKA52_P01 carrier LTA1009 is not moving, several carriers are waiting on CNV. Thank you April 4, 2025 at 4:15 PM, Novák Károly F. A. : Checking April 4, 2025 at 4:33 PM, Novák Károly F. A. : Solved. April 4, 2025 at 6:06 PM, VK (mcs) : @FA Please check Anode reel STK A52 Inactive stop April 4, 2025 at 6:10 PM, Simon Attila F. A. : Now working! April 4, 2025 at 6:17 PM, Ngoc zia : Vd Ca front of VD-ST warehousing CV108 data mismatch error April 4, 2025 at 6:20 PM, VK (mcs) : @FA Please check Circular logistics conveyor C1CNV072. Track(16100). April 4, 2025 at 6:31 PM, VK (mcs) : @FA Please check Cathode post-STK C72 port 22 (13004) output H/S off! April 4, 2025 at 6:40 PM, Csanálosi Gábor FA : I cant see any error or problem with it. April 4, 2025 at 6:42 PM, Simon Attila F. A. : @VK (mcs) Please check available material for press anode and slit anode, because LR active, but not moving crane and agv. April 4, 2025 at 6:43 PM, VK (mcs) : If you open the SCS , then you can see plenty of carriers are waiting , error was output H/S off! Now it fixed. Thx April 4, 2025 at 6:44 PM, Csanálosi Gábor FA : Yup, indeed, was no error, nor fault message, i stopped and restarted the conv, and as u see, that worked. ;) April 4, 2025 at 6:45 PM, VK (mcs) : Can you please tell me which line? 1st or 2nd April 4, 2025 at 6:45 PM, Simon Attila F. A. : An press 3, press 4, an slitt 3 April 4, 2025 at 6:48 PM, VK (mcs) : There is no available material for both press and slitter April 4, 2025 at 6:48 PM, Simon Attila F. A. : Thank you so much April 4, 2025 at 6:50 PM, VK (mcs) : @FA Please check Cathode pre-STK C71-M01 manual port M01 MLC4243 is waiting for a while. SCS indicates: cargo not exists April 4, 2025 at 6:51 PM, Csanálosi Gábor FA : @VK (mcs) the Gf Ca Vd agv #9 has a mysterious problem with the VD maschine where it is now: C5VDC010. Can you pls send agv#9 to elswhere, and assign any other agv to fill that chanber? April 4, 2025 at 6:53 PM, VK (mcs) : In this case I can send it to post STK and machine needs a new LR for ports 3 and 4. Would you want me to do it? April 4, 2025 at 6:53 PM, Csanálosi Gábor FA : Yes pls April 4, 2025 at 6:55 PM, VK (mcs) : Sure, job cancelled. Please LR again for both ports 3 and 4. Thx April 4, 2025 at 7:03 PM, Csanálosi Gábor FA : @vk pls check track 16083, on C2cnv072 theres a plate with empty magazines, but shows them full, even the sensors working properly. Can you give empty status and destination pls? April 4, 2025 at 7:04 PM, Csanálosi Gábor FA : C1cnv072 sry April 4, 2025 at 7:04 PM, VK (mcs) : Checking April 4, 2025 at 7:07 PM, Csanálosi Gábor FA : @Ngoc zia pls April 4, 2025 at 7:09 PM, VK (mcs) : Please rack in it again, April 4, 2025 at 7:10 PM, Csanálosi Gábor FA : It went to warehouse April 4, 2025 at 7:11 PM, Csanálosi Gábor FA : Now theres another one stucked there April 4, 2025 at 7:12 PM, VK (mcs) : Oh, I see OP action it will stay there. Because rack in valid is full April 4, 2025 at 7:12 PM, Csanálosi Gábor FA : Thats showed empty now, but no destination MLC4092 April 4, 2025 at 7:13 PM, VK (mcs) : I am checking April 4, 2025 at 7:15 PM, Yaroslav SL/C 6 line : This message was deleted. April 4, 2025 at 7:15 PM, VK (mcs) : It has a job to pre-STK, it doesn’t move because can not find suitable auto port April 4, 2025 at 7:15 PM, Yaroslav SL/C 6 line : Hello everyone @fa ST 6 line, buttons UR and LR on the An’ station doesn’t work. Please check. Thanks April 4, 2025 at 7:16 PM, Yaroslav SL/C 6 line : Near machine #3 April 4, 2025 at 7:16 PM, Dima Kusyk : @mcs Good evening everyone! Please, share information about plates An' and Ca' in warehouse for line 4/STK. Thank you so much! April 4, 2025 at 7:21 PM, VK (mcs) : Next available LOT GF Pre-STK> notching Anode: 269 Cathode:322 Pre_STK > VD Anode:03 Cathode:00 Post-STK > stacking Anode: 91 Cathode:28 April 4, 2025 at 7:25 PM, Dima Kusyk : We don't have any plates designed just for Line 4/STK? April 4, 2025 at 7:26 PM, VK (mcs) : Let me check for line 4 April 4, 2025 at 7:29 PM, VK (mcs) : Line 4 VD Anode:00 Cathode:00 Stacking Anode:07 Cathode:00 April 4, 2025 at 8:09 PM, Dima Kusyk : @mcs @fa There's no material on line 5, please check it. AGV is not bringing in the material. April 4, 2025 at 8:10 PM, VK (mcs) : Stacking? April 4, 2025 at 8:10 PM, Dima Kusyk : Yes April 4, 2025 at 8:13 PM, VK (mcs) : Material are in CNV port and waiting for AGV, currently all AGVs are busy due to UR. April 4, 2025 at 8:23 PM, Dima Kusyk : @mcs Please, delete all UR for line 4 April 4, 2025 at 8:24 PM, Dima Kusyk : @fa Check warehouse please. He is stopped April 4, 2025 at 8:30 PM, VK (mcs) : UR for line 4 stacking cleared. April 4, 2025 at 8:30 PM, Hữu Thắng : @MCS . Plz share quaity VD - STK . Thank u April 4, 2025 at 8:35 PM, VK (mcs) : Next LOT quantity GF 5th&6th line Pre-STK > VD Anode:00 Cathode:00 Post-STK> stacking Anode: 105 Cathode:27 April 4, 2025 at 8:37 PM, Yaroslav SL/C 6 line : @mcs on the storage CA’72 we have 33 plates with full mgz, but they not come to lines. Please check. We are running out of material. Thanks April 4, 2025 at 8:38 PM, VK (mcs) : For which line? April 4, 2025 at 8:39 PM, Yaroslav SL/C 6 line : 5 and 6 April 4, 2025 at 8:40 PM, Yon Ko/연커/ : @MCS hello could u please check those half chambers. VD CA 5-1, VD CA 6-10. April 4, 2025 at 8:41 PM, VK (mcs) : If you mean stacking section I mentioned availability material in previous messages. And carriers are in CNV port and waiting for AGV April 4, 2025 at 8:44 PM, VK (mcs) : VD C 5/1 as request of operations I cancelled job due to AGV error. Operations already requested load. VD C6/1 we received LR for ports 3 and 4. Waiting for material. April 4, 2025 at 8:45 PM, VK (mcs) : 6/10* April 4, 2025 at 9:03 PM, VK (mcs) : @Manufacturing @FA VD A 6/9 has transfer command but equipment is OoS due to request for maintenance! Is it finished or still under repairs ? April 4, 2025 at 9:15 PM, Hữu Thắng : @MCS . Plz check VD CA 6/6 . Thank u April 4, 2025 at 9:16 PM, Hữu Thắng : UR April 4, 2025 at 9:16 PM, VK (mcs) : Equipment is out of service April 4, 2025 at 9:18 PM, Hữu Thắng : Recheck plz April 4, 2025 at 9:21 PM, VK (mcs) : UR received April 4, 2025 at 9:44 PM, VK (mcs) : @FA Please check , problem still not solved,thx April 4, 2025 at 9:46 PM, Csanálosi Gábor FA : Solved April 4, 2025 at 10:16 PM, Hữu Thắng : @MCS Could u plz check UR 5-6 . thank u April 4, 2025 at 10:16 PM, Hữu Thắng : VD CA . April 4, 2025 at 10:24 PM, Lajos Gábor F.A. : @mcs could you check c1stkc72_p10_op01 mlc2216. Cargo not exist April 4, 2025 at 10:25 PM, VK (mcs) : UR received and material transferred, At 22:21 RTD received LR April 4, 2025 at 10:26 PM, VK (mcs) : As I see, carrier is in P10-OP01 in SCS. @FA Please check it. Thx April 4, 2025 at 10:30 PM, VK (mcs) : Storage- Carrier transfer received but after that port went OoS due to light curtain error. April 4, 2025 at 11:37 PM, 전 운 (Jeon Woon) : @이주봉PM LEE JUBONG(FA) GF CA 순환물류 쪽 Out 03,04 Port에 빈매거진 플레이트가 나와있는데 확인좀 해주실수 있을까요?? April 4, 2025 at 11:48 PM, 이주봉PM LEE JUBONG(FA) : 네 잠시만요 화성동 문제있어서 조립가서 확인할게요 April 4, 2025 at 11:51 PM, 전 운 (Jeon Woon) : 네 알겟습니다~ April 5, 2025 at 12:04 AM April 5, 2025 at 12:04 AM, Yaroslav SL/C 6 line : @fa AGV#6 stopped near station 6 line ST machine#11. Please check. Thanks April 5, 2025 at 12:06 AM, 김상훈 left this chatroom. April 5, 2025 at 12:08 AM, Csanálosi Gábor FA : Done April 5, 2025 at 12:39 AM, VK (mcs) : This message was deleted. April 5, 2025 at 12:47 AM, 인제(Hwang) : @VK (mcs) VD Ca 5-1, 6-10 half chamber. Please check the LR job status April 5, 2025 at 12:57 AM, VK (mcs) : LR received, waiting for material April 5, 2025 at 1:03 AM, 인제(Hwang) : Thank you! April 5, 2025 at 1:29 AM, Hữu Thắng : @MCS Could u please check UR VD AN 5/2 . thanks April 5, 2025 at 1:30 AM, VK (mcs) : UR received, job assigned April 5, 2025 at 2:33 AM, Hữu Thắng : @MCS . VD CA 5/1 - 6/10 still 2 plates . Could u plz check LR ? Thanks April 5, 2025 at 2:38 AM, VK (mcs) : Did you request again LR ?? Last request is: VD C 5/1 LR received at 1:21:39 VD 6/10 LR received at 1:22:27 Any machine has LR before that this time, material will deliver first to that. Deliver is base on priority of LR. April 5, 2025 at 2:40 AM, Hữu Thắng : Sure . 5’ please April 5, 2025 at 2:40 AM, VK (mcs) : No no , do not request again. April 5, 2025 at 2:41 AM, Hữu Thắng : Not yet . I didn’t request LR . Just informed to u April 5, 2025 at 2:43 AM, VK (mcs) : This message was deleted. April 5, 2025 at 2:44 AM, VK (mcs) : As I see for VD 6/10 We received LR several times 19:52 00:14 00:46 1:22 Any time we received LR , machine going to end of queue. So please Waite. April 5, 2025 at 2:45 AM, Hữu Thắng : Okay . Thank you . April 5, 2025 at 4:46 AM, QuangPhan : This message was deleted. April 5, 2025 at 4:47 AM, 전 운 (Jeon Woon) : 펨님 혹 언제 확인되나요…? @이주봉PM LEE JUBONG(FA) April 5, 2025 at 4:47 AM, QuangPhan : Nc CA #agv5 error April 5, 2025 at 5:06 AM, 전 운 (Jeon Woon) : @Dima Kusyk Please write the 4Line semi-finished product inspection value. April 5, 2025 at 5:56 AM, Yaroslav SL/C 6 line : @fa AGV1 stopped near ST 6 line #16. Please check April 5, 2025 at 6:11 AM, Elena SL : @fa AGV#1 stop near 6/16 ST. please help April 5, 2025 at 6:13 AM, Elena SL : Now ok. Sorry April 5, 2025 at 6:14 AM, Khaliun/Ivancsa FA : Solved April 5, 2025 at 6:14 AM, Khaliun/Ivancsa FA : Solved April 5, 2025 at 6:34 AM, Khaliun/Ivancsa FA : good morning. @MCS GF ST Cathode AGV#8 idle pls check April 5, 2025 at 6:34 AM, Mohammad Amir : Checking April 5, 2025 at 6:37 AM, duzzaman Md (MCS) : Job was cancelled by the operator at 5.32. Please send this back to STK. Thank you April 5, 2025 at 6:52 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 8 Technician, 1 Sl ———————————— Electrode (2): Szabadi Miklós Kiss Balázs ———————————— Assembly(4): Nagy Zsolt Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor ———————————— April 5, 2025 at 7:02 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 05 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 5, 2025 at 7:18 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA 안녕하세요. AGV 통신 끊긴거 같습니다. 확인 부탁드립니다. April 5, 2025 at 7:18 AM, Jun(정우준)_SKOH FA : 노칭 양극인가요? 잠시만요 April 5, 2025 at 7:18 AM, 이한웅(삼구) : 음극은 작동중이고 양극 전체 AGV정지중잊니다 April 5, 2025 at 7:22 AM, 김범준 : VD CA #1 AGV stopped check plz April 5, 2025 at 7:23 AM, Jun(정우준)_SKOH FA : 통신끊긴건 아니고, 서로 블락걸린건데 원인은 한번 확인해보겠습니다. April 5, 2025 at 7:23 AM, Khaliun/Ivancsa FA : Solved April 5, 2025 at 8:28 AM, 이한웅(삼구) : please check NC Ca #10 AGV April 5, 2025 at 8:31 AM, Khaliun/Ivancsa FA : Solved April 5, 2025 at 8:34 AM, duzzaman Md (MCS) : @Fa @Szabadi Miki Please check E0STKC51-B12, There is CV driven time over error . It's blocking one transfer. Thank you April 5, 2025 at 8:37 AM, Mohammad Amir : Next LOT available GF Pre-STK > notching Anode:303 Cathode:350 Pre-STK > VD 5&6 Anode: 02 Cathode:01 Line 5&6 Anode:01 Cathode:00 Post-STK > stacking 5&6 Anode:76 Cathode:20 April 5, 2025 at 8:38 AM, Yulya Kirsanova : Hello. Agv#1 stopped with error near Staсking Line 5/20 Please check @fa Thank you so much. April 5, 2025 at 8:42 AM, 임석호(Henry) : 저희 신입사원이 풀매거진이 있는데 LR 명령을 눌러서 자재가 들어있는 플레이트를 AGV 가 떠가고 있었습니다. 확인부탁드립니다. 신입사원 교육은 다시 진행하겠습니다.. April 5, 2025 at 8:49 AM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 303 Cathode: 349 Pre-STK> VD Anode: 00 Cathode: 04 Post-STK > stacking Anode: 76 Cathode: 18 April 5, 2025 at 8:54 AM, Mohammad Amir : Please check this issue ,it still exists and blocking transfer. Thank you very much! April 5, 2025 at 9:05 AM, Ashley🖤💚✨ : ST L9 outside the #10 AGV stop. please help. thank you April 5, 2025 at 9:08 AM, duzzaman Md (MCS) : @Szabadi Miki Please check this STK, E0STKC51_B07/B09 Track sensor detection abnormalities error Thanks April 5, 2025 at 9:31 AM, Mohammad Amir : @Szabadi Miki Please check this STK, E0STKC51_B07/B09 CV Driven Time over error. Thanks April 5, 2025 at 9:37 AM, KIM SEYEON [김세연]_FA : @정다은 @김대웅 Kim Daewung @임석호(Henry) 항상 많은 도움 감사드립니다. 오퍼레이터가 UR을 누를 때 하기 사항 주의하도록 교육 부탁드립니다. ㄴ 매거진 자재가 있을때 UR 누르지 말기 ㄴ UR 누를때 커버 있는지 한번 더 확인하고 커버있으면 제거후 UR누르기 두번째같은 경우는 자동창고에 입고되면 비가동이 상당히 큽니다. 꼭 부탁드립니다. 감사합니다. April 5, 2025 at 9:40 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52_07_003 there is Data mismatch error and whole CNV is OOS and blocking reels delivery. Thank you very much! April 5, 2025 at 9:53 AM, Elena SL : Good morning AGV #2 stop near 6 line ST. please help April 5, 2025 at 9:54 AM, Ivan Kasian Sl 5L 🥹 : Good morning. We will instruct the operators again. April 5, 2025 at 10:03 AM, Yulya Kirsanova : Good morning AGV #8 stop near 5 line machine 1 ST. Help please. April 5, 2025 at 10:19 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_16_144 there is Data Mismatch error. Thank you very much! April 5, 2025 at 10:26 AM, Mohammad Amir : Reels Available:- AN-162 CA-279 April 5, 2025 at 10:31 AM, Novák Károly F. A. : @Mohammad Amir I am on holiday. In my place @Szabolcs . Thank you. April 5, 2025 at 10:32 AM, Mohammad Amir : Thank you very much for the information! April 5, 2025 at 10:32 AM, Mr.Miti (미티) FA : Ez nem hozzá állás 🤣🤣 April 5, 2025 at 10:34 AM, KIM SEYEON [김세연]_FA : Thank you. Spread this information to other shift also April 5, 2025 at 10:35 AM, Ivan Kasian Sl 5L 🥹 : Of course I will do it April 5, 2025 at 10:42 AM, Elena SL : Hello. Please help! AGV #4 stop near L6 ST April 5, 2025 at 10:56 AM, Ivan Chobitko : @fa AGV 4 L6 ST11 ACS emergency stop Check please April 5, 2025 at 10:58 AM, KIM SEYEON [김세연]_FA : @Zulaa/졸라/Ivancsa FA what was the situation? April 5, 2025 at 10:59 AM, Zsolt F.A. : @mcs gf ca vd 6-6 furnace still working pls dont send agv there. April 5, 2025 at 11:00 AM, Mohammad Amir : Checking April 5, 2025 at 11:04 AM, Mohammad Amir : There are jobs exists to send materials to post VD STK. Should I cancel these jobs? April 5, 2025 at 11:06 AM, Zsolt F.A. : Yes pls April 5, 2025 at 11:07 AM, Mohammad Amir : Sure, working on it! April 5, 2025 at 11:08 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! April 5, 2025 at 11:09 AM, Zsolt F.A. : Thank you April 5, 2025 at 11:09 AM, Mohammad Amir : You are welcome! April 5, 2025 at 11:30 AM, Khaliun/Ivancsa FA : @MCS Please change the function of AGV5 and AGV7 on VD cathode. April 5, 2025 at 11:31 AM, Khaliun/Ivancsa FA : 5/8 closed April 5, 2025 at 11:32 AM, Mohammad Amir : Currently these AGV has destination to 5-8 CA VD. Should I cancel these jobs? April 5, 2025 at 11:34 AM, Khaliun/Ivancsa FA : yes, but he won't take a closed job 5/8champer. April 5, 2025 at 11:35 AM, Mohammad Amir : Okay I am cancelling the jobs and after please send these AGVs back to STK and in future these materials can be used automatically. Thank you very much! April 5, 2025 at 11:35 AM, Simon Dávid D SL NC : @FA CA VD megált a #7 AGV ,megnéznétek,köszönöm April 5, 2025 at 11:40 AM, Mohammad Amir : Please send the AGVs back to STK. Thank you! April 5, 2025 at 11:49 AM, Khaliun/Ivancsa FA : The job is done. April 5, 2025 at 11:51 AM, Mohammad Amir : Thank you very much! April 5, 2025 at 12:46 PM, Simon Dávid D SL NC : @FA hello NC CA 6/3 a mgz lift emelő nem megy le ,megnéznétek köszönöm April 5, 2025 at 12:56 PM, Mohammad Amir : @Fa @Zsolt F.A. Please check C1STKC72_C01 Ready Off during Forking error. Thank you very much! April 5, 2025 at 1:04 PM, Mohammad Amir : @Manufacturing Please check and remove there are 1+2 carriers waiting at C1CNV072_M01. Thank you very much! April 5, 2025 at 1:18 PM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 299 Cathode: 342 Pre-STK> VD Anode: 01 Cathode: 02 Post-STK > stacking Anode: 70 Cathode: 08 April 5, 2025 at 1:23 PM, Mohammad Amir : @FA @Zsolt F.A. Please check E0CNVA52(M01 ~M10 and BP01~BP15) there is INV-01 Ready Off error and it is blocking reels delivery. Thank you very much! April 5, 2025 at 1:29 PM, Mohammad Amir : @FA @Zsolt F.A. Please check MLA0179 located at C1CNV072_16_100 it is not moving and because of this material supply to stacking process has been blocked. Everything good from MCS side , please check physically. Thank you very much! April 5, 2025 at 1:31 PM, Mohammad Amir : Please check this on priority as there is no Anode materials available for Stacking process because of this issue. Thank you very much! April 5, 2025 at 1:54 PM, Mohammad Amir : Please check this on priority as there is no Anode materials available for Stacking process because of this issue. Thank you very much! April 5, 2025 at 1:58 PM, Ivan Chobitko : yes, you are right, there is almost none left on the line L5/L6 April 5, 2025 at 1:59 PM, Mohammad Amir : Yes because of the issue I mentioned earlier this has existed since 12:57. @FA please check! Thank you very much! April 5, 2025 at 2:08 PM, Mohammad Amir : @FA @Zsolt F.A. Please check E0STKC52_C01 Load Oversize Error Right. Thank you very much! April 5, 2025 at 2:16 PM, Zsurbej Zsolt F.A. : @mcs please generate order for gf an nc E0STKA51_C02 crane (LTA1807) It's stuck on the crane for some time now. April 5, 2025 at 2:18 PM, Mohammad Amir : Checking April 5, 2025 at 2:21 PM, Mohammad Amir : It already have with destination E0CNVC53_M02 ,it is not moving cause currently E0STKC52 is not in service and no route available to complete this job. Thank you very much! April 5, 2025 at 2:22 PM, Ivan Kasian Sl 5L 🥹 : Hello Amir. Created job for agv please , for anode material April 5, 2025 at 2:22 PM, Ivan Kasian Sl 5L 🥹 : P08 p12 for stacking April 5, 2025 at 2:23 PM, Ivan Kasian Sl 5L 🥹 : P12 working now April 5, 2025 at 2:23 PM, Ivan Kasian Sl 5L 🥹 : Agv8 April 5, 2025 at 2:24 PM, Ivan Kasian Sl 5L 🥹 : Check please magazine delivery process, don't want lines to stop Thank you so much April 5, 2025 at 2:26 PM, Mohammad Amir : Everything is good now Now materials are reaching to the O/P ports of CNV072 ,there was carrier MLA0179 stuck at C1CNV072_16_100 since 12:57 and this issue just resolved now so that's why there is lack of Materials. But now everything is good and material transfer has normalized , ✅ I am monitoring the whole process to make sure there should be materials for production. For P08 AGV #5 on the way as well. Thank you! April 5, 2025 at 2:27 PM, Ivan Kasian Sl 5L 🥹 : Thanks for checking, dear Amir April 5, 2025 at 2:27 PM, Mohammad Amir : You are welcome! April 5, 2025 at 2:40 PM, Mohammad Amir : This message was deleted. April 5, 2025 at 2:40 PM, Mohammad Amir : @FA @Zsolt F.A. Please check C1STKA72_C01 there is ready off during Forking error and Anode stacking materials supply has stopped there is already very less material, please check this on priority. Thank you very much ! April 5, 2025 at 3:16 PM, Mohammad Amir : @FA @Zsolt F.A. Please check E0STKC51_C01/C02 it is inactive without error since 14:14 and it is causing traffic of materials on recovery way of E0CNVC52. Thank you! April 5, 2025 at 3:40 PM, Simon Dávid D SL NC : @FA hello NC CA 6/2 beborult egy üres magazin,ki kénne szedni,köszönöm April 5, 2025 at 3:57 PM, Mohammad Amir : @FA @Zsolt F.A. Please check C1STKA71_P17,18 there is light -01 error and it is blocking two transfers. Thank you very much! April 5, 2025 at 4:15 PM, Mohammad Amir : @FA @Zsolt F.A. Please check C1STKA72_C02 there Fork#1 Load Position Error When Active . Thank you very much! April 5, 2025 at 4:44 PM, Mohammad Amir : Next LOT quantity available GF Pre-STK > Notching Anode: 293 Cathode: 327 Pre-STK> VD Anode: 03 Cathode: 03 Post-STK > stacking Anode: 76 Cathode: 34 April 5, 2025 at 5:24 PM, Mohammad Amir : @FA @Zsolt F.A. Please check C1STKA72_P11/P12 there is light curtain error . Thank you! April 5, 2025 at 5:52 PM, Ngoc zia : Nc An Robot 2 #agv7 error April 5, 2025 at 6:04 PM, Ynja/ivancsa FA invited Ganbaa FA. April 5, 2025 at 6:40 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 318 - Anode: 283 VD Pre STK > VD 5/6 Line - Cathode: 1 - Anode: 0 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 45 - Anode: 82 April 5, 2025 at 6:53 PM, QuangPhan : @FA GF NC CA Robot#3 error ( MCS Data report incomplete ) April 5, 2025 at 6:56 PM, Kateryna SSL C : Hello everyone! @fa Agv#8 stopped opposite the VD CA. Please, check April 5, 2025 at 6:56 PM, Kateryna SSL C : L4 ST April 5, 2025 at 6:58 PM, Shahbaz 샤바즈 MCS/RTD : @FA There was a request to put the VD AN 6-9 OOS for maintenance. Please confirm the status, as the jobs for the machine have been pending for a long time. Thank you. April 5, 2025 at 6:59 PM, Ngoc zia : NC An 5.1 #agv1 error April 5, 2025 at 7:30 PM, Ngoc zia : This message was deleted. April 5, 2025 at 7:33 PM, Ngoc zia : @msc VD -Ca 6-10 (#55) hand over from previous shift. Loading haft of chamber from yesterday. FA can’t help. Can u check pls. April 5, 2025 at 7:35 PM, Shahbaz 샤바즈 MCS/RTD : The ports are OOS on the RTD side. It should be reported from the equipment. April 5, 2025 at 7:37 PM, QuangPhan : Hello! @FA GF NC CA robot #3 error ( No message). Thanks April 5, 2025 at 8:14 PM, 김진호B_PM_시너스텍 left this chatroom. April 5, 2025 at 8:22 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1CNV072_P08 (16009) “Data mismatch error “ Thank you April 5, 2025 at 8:24 PM, Ynja/ivancsa FA : solved April 5, 2025 at 9:13 PM, QuangPhan : Hello! @FA GF NC CA robot #3 error ( MCS Data report incomplete error). Thanks April 5, 2025 at 10:04 PM, 인제(Hwang) : NC Ca Robot#3 Error. check plz April 6, 2025 at 12:16 AM April 6, 2025 at 12:16 AM, Ngoc zia : @fa can u come NC An 5.1 pls. Outline mgz can’t move April 6, 2025 at 12:41 AM, QuangPhan : @FA GF NC CA robot #3 error . Please check. Thanks April 6, 2025 at 2:33 AM, Ngoc zia : can u check the condition of provide reel on line 5 Nc An pls. Around 30min don’t have reel come out. April 6, 2025 at 2:37 AM, Shahbaz 샤바즈 MCS/RTD : STKA51 port M04, M06 reel received recently and are occupied, M05 there is a pending job. April 6, 2025 at 3:06 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check the reel tray LTA0119 at E0STKA51_BP08 (70005), it is there for along time delaying the delivery of reel to M05. In CIM it shows “Empty Error” Thank you April 6, 2025 at 3:10 AM, Kertész Dániel : I checked it now, and this port (E0STKA51_B08) is empty April 6, 2025 at 3:16 AM, Shahbaz 샤바즈 MCS/RTD : Was it removed manually, there is no log and it is showing there in SCS as well. April 6, 2025 at 3:32 AM, Ngoc zia : Can u check VD An 5-2 (#38). Did u received the request agv of this chamber? April 6, 2025 at 3:35 AM, Shahbaz 샤바즈 MCS/RTD : No UR received from VD An 5-2 April 6, 2025 at 3:35 AM, Ngoc zia : Thank you April 6, 2025 at 3:36 AM, Ngoc zia : VD An. 4-9 #agv6 error. 3 other behind stop April 6, 2025 at 3:37 AM, Kertész Dániel : Sorry, I was wrong, I checked another port. Now I checked it again, and solved the problem. Sorry for my mistake. April 6, 2025 at 3:40 AM, Shahbaz 샤바즈 MCS/RTD : Ok, thank you. April 6, 2025 at 4:46 AM, Ngoc zia : Vd An5-7 #agv8 error. 4 other agv behind is stop April 6, 2025 at 5:29 AM, Ngoc zia : @fa can u take out mgz on VD-An chamber 5-2 (#38) & move to STKA72 pls. April 6, 2025 at 5:38 AM, Ngoc zia : NC An #robot 1 errror April 6, 2025 at 5:49 AM, Ngoc zia : NC An 6.1 #agv4 error April 6, 2025 at 5:49 AM, QuangPhan : NC CA #AGV6 error April 6, 2025 at 5:58 AM, Simon Dávid D SL NC : @FA hello, NC CA megált a #6 AGV ,megnéznétek köszónöm April 6, 2025 at 6:02 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "D" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (3): Szabadi Miklós Kiss Balázs Oláh Andris ———————————— Assembly(5): Nagy Zsolt Novák Károly Novák Zoltán Kovács Szabolcs István Zsurbej Zsolt ———————————— Formation/Modul(2): Martina Dávid Nagy Gábor April 6, 2025 at 6:04 AM, Khaliun/Ivancsa FA : @fa tech GF NC Anode robot#1 error pls check April 6, 2025 at 6:04 AM, Novák Károly F. A. : On my way April 6, 2025 at 6:19 AM, Novák Károly F. A. : Solved April 6, 2025 at 6:28 AM, Simon Dávid D SL NC : @FA hello NC CA 5/3 elforult egy magazin a betöltönél ,megnéznétek köszönöm April 6, 2025 at 6:36 AM, Novák Károly F. A. : Kész. April 6, 2025 at 6:45 AM, Novák Károly F. A. : @Mohammad Amir E0STKA51_M05_OP01 , LTA0119 problem. It won't take the empty carrier. Can you help? April 6, 2025 at 6:50 AM, Shakir (MCS) : There is no job for this carrier. Job was cancelled at 6:33. April 6, 2025 at 6:54 AM, Novák Károly F. A. : A new colleague deleted the job. He thought the crane would take the empty carrier. Can you give the crane a new job on the carrier? Sorry for the trouble. April 6, 2025 at 7:00 AM, Shakir (MCS) : Job has been created for carrier ✅ Monitoring further Thank you April 6, 2025 at 7:01 AM, Novák Károly F. A. : Thank you April 6, 2025 at 7:01 AM, Shakir (MCS) : You’re welcome April 6, 2025 at 7:10 AM, Shakir (MCS) : The job has been completed successfully carrier stocked E0STKA51(0103101). Issue has been resolved now Thank you April 6, 2025 at 7:16 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 06 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 6, 2025 at 7:49 AM, Shakir (MCS) : @FA @Novák Károly F. A. As per request to put the VD AN 6-9 & 6-5 OOS for maintenance. Please confirm the status physically, as the jobs for the machine have been pending for a long time. Thank you. April 6, 2025 at 7:56 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 315 - Anode: 281 VD Pre STK > VD - Cathode: 02 - Anode: 20 VD Post STK > Stacking - Cathode: 66 - Anode: 57 April 6, 2025 at 8:04 AM, Novák Károly F. A. : Checking April 6, 2025 at 8:11 AM, duzzaman Md (MCS) : Reels Available: An: 200 Ca: 230 April 6, 2025 at 8:41 AM, Novák Károly F. A. : 6 - 9 and 6 - 5 machines can get work. April 6, 2025 at 8:42 AM, Shakir (MCS) : Alright we make it INSERVICE from MSC. Thank you April 6, 2025 at 8:46 AM, duzzaman Md (MCS) : It's in service now. Carriers are on the way for 6-9 & 6-5 chamber AN April 6, 2025 at 9:18 AM, Baek Hojong(백호종)FA : @장현태 피엠님 오전에 말씀 드린 양극 릴창고내 기상반 통신카드 교체작업 오후 1시부터 시작이고 비가동 1hr 말씀드렸는데 최대한으로 비가동없이 10-20분내로 작업 마무리 할수 있도록 하겠습니다 April 6, 2025 at 9:20 AM, 장현태 : 넵 감사합니다! April 6, 2025 at 9:51 AM, Simon Dávid D SL NC : @FA hello VD An #54 Kemencénél megált az AGV,megnéznétek,köszi April 6, 2025 at 9:52 AM, 백한용 left this chatroom. April 6, 2025 at 9:56 AM, Novák Károly F. A. : A kemencénél nincs agv. A kemencében bent vannak a magazinok. Maga a kemence üzemkész állapotot ír. Működik a kemence? April 6, 2025 at 9:59 AM, Novák Károly F. A. : A Vd An 50 és 54es géppel gond van. April 6, 2025 at 10:14 AM, Novák Károly F. A. : @Shakir (MCS) Hy. Vd An 6-9 machine NG . I will return the plates in c72 (MLA0026, MLA3071, MLA4161, MlA1150) April 6, 2025 at 10:15 AM, Shakir (MCS) : Is there any issue with VD machine? April 6, 2025 at 10:19 AM, Novák Károly F. A. : Yes and vd an 6-5 machine is bad too. April 6, 2025 at 10:20 AM, duzzaman Md (MCS) : Please send it to C72 as well April 6, 2025 at 10:20 AM, Novák Károly F. A. : Okay. April 6, 2025 at 10:23 AM, Novák Károly F. A. : This message was deleted. April 6, 2025 at 10:25 AM, Novák Károly F. A. : @Shakir (MCS) 6-5 machine (MLA0168, MLA1044, MLA0078, MLA4107) April 6, 2025 at 10:26 AM, duzzaman Md (MCS) : Any problem with these ? Please clarify. April 6, 2025 at 10:28 AM, Novák Károly F. A. : 6-9,6-5 did not start drying. April 6, 2025 at 10:30 AM, Novák Károly F. A. : @Shakir (MCS) Please, Don't send work to these machines. April 6, 2025 at 10:31 AM, duzzaman Md (MCS) : We are now making it out of service from MCS. Please let us know when the repair is complete. April 6, 2025 at 10:37 AM, 이한웅(삼구) : Please check NC An #1 Robot April 6, 2025 at 10:42 AM, Novák Károly F. A. : Checking April 6, 2025 at 10:48 AM, Novák Károly F. A. : @Shakir (MCS) Please contact the Vd maintenance manager ( @ReichertT) regarding the condition of the machines. April 6, 2025 at 10:51 AM, duzzaman Md (MCS) : @VD Maintainance Manager Please take care of this issue. We made it out of service. Once you are done repairing, kindly let us know. Thanks! April 6, 2025 at 11:08 AM, 이한웅(삼구) : An 6-9 What's broken? April 6, 2025 at 11:10 AM, duzzaman Md (MCS) : It didn't start drying. @Novák Károly F. A. Please explain further. Thank you April 6, 2025 at 11:15 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 313 - Anode: 283 VD Pre STK > VD - Cathode: 03 - Anode: VD Post STK > Stacking - Cathode: 60 - Anode: 83 April 6, 2025 at 11:19 AM, Novák Károly F. A. : The vd machines do not belong to FA. We do not know the cause of the problem. The machines did not start. Auto and agv mode were on. April 6, 2025 at 11:33 AM, 이한웅(삼구) : Please don't return it to Warehouse 72. Let me know while the plate is still attached. There was no alarm on the equipment. Please check An VD 6-9 LR. @duzzaman Md (MCS) April 6, 2025 at 11:37 AM, duzzaman Md (MCS) : LR is unavailable in sections 6-9 and 6-9 AN, as it has been made out of service at the operations team's request. Thank you. April 6, 2025 at 11:38 AM, duzzaman Md (MCS) : 6-9 & 6-5* April 6, 2025 at 11:42 AM, duzzaman Md (MCS) : However, there's existing job at 6-9 ,and that too is alternated because destination machine being out of service. Should we make it 'in service'? Thank you April 6, 2025 at 11:48 AM, 이한웅(삼구) : I'll test the equipment and get back to you. Thank you. April 6, 2025 at 11:52 AM, duzzaman Md (MCS) : @FA Could you please check why carrier LTA1344 at stk port E0STKA52_P01 is not moving, as several other carriers are waiting at the CNV? Thank you. April 6, 2025 at 12:10 PM, Zsolt F.A. : Checking April 6, 2025 at 12:24 PM, Zsolt F.A. : Working. April 6, 2025 at 1:30 PM, Elena SL : Hello 👋 @FA AGV#10 near 6 line made a hit on the station . alarm April 6, 2025 at 1:47 PM, Elena SL : Hello. @fa AGV#8 stopped near 6 line ST. please check April 6, 2025 at 1:47 PM, Khaliun/Ivancsa FA : Okey April 6, 2025 at 1:48 PM, Elena SL : Thank you 🙏 April 6, 2025 at 1:49 PM, Novák Károly F. A. : Kész April 6, 2025 at 2:39 PM, Yulya Kirsanova : Hello. Agv#8 stopped with error near Staсking Line 6/19 Please check @fa Thank you so much. April 6, 2025 at 5:04 PM, Elena SL : Hello 👋 AGV#5 stop near L6. Please check April 6, 2025 at 5:09 PM, Khaliun/Ivancsa FA : Solved April 6, 2025 at 5:37 PM, Elena SL : @FA please check AGV #1 near 5 L. April 6, 2025 at 5:40 PM, Elena SL : @FA please check AGV#2 near L5/6 Please help April 6, 2025 at 5:40 PM, Elena SL : @ivancsa Fa April 6, 2025 at 5:41 PM, 이한웅(삼구) : There is nothing wrong with chamber 6-9. It is an empty chamber, please change it to usable. April 6, 2025 at 5:53 PM, Yulya Kirsanova : Hello. Agv#2 stopped with error near Staсking Line 5/16 Please check @fa Thank you so much. April 6, 2025 at 6:03 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51_C02 there is Travel driver error. Thank you April 6, 2025 at 6:06 PM, 이한웅(삼구) : Please let me know when the changes are complete. April 6, 2025 at 6:06 PM, Shahbaz 샤바즈 MCS/RTD : It’s done now and plate are on the way. April 6, 2025 at 6:08 PM, 이한웅(삼구) : @강진복 Kang Jinbok LR 눌러주세요 April 6, 2025 at 6:09 PM, 이한웅(삼구) : thank you! April 6, 2025 at 6:15 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 293 - Anode: 264 VD Pre STK > VD 5/6 Line - Cathode: 2 - Anode: 09 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 74 - Anode: 86 April 6, 2025 at 7:24 PM, Dima Kusyk : @fa Hello everyone! Line 5/STK AGV#5 stopped near STK11. Please check it. Thanks April 6, 2025 at 8:23 PM, QuangPhan : Can you check the condition of provide reel on line 5 Nc An please. Around 30min don’t have reel come out. April 6, 2025 at 8:25 PM, Shahbaz 샤바즈 MCS/RTD : M04 is occupied, there is a job for M05 and M06 waiting for the crane to transfer. April 6, 2025 at 8:32 PM, QuangPhan : Thank you. April 7, 2025 at 12:03 AM April 7, 2025 at 12:03 AM, QuangPhan : Can you check the condition of provide reel on line 5 Nc An please. Around 40min don’t have reel come out. We are running low on reels on box. April 7, 2025 at 12:07 AM, Shahbaz 샤바즈 MCS/RTD : There are jobs for M04,M05 in waiting list. April 7, 2025 at 12:39 AM, QuangPhan : Hello! @FA NC CA robot #3 error . Thanks. April 7, 2025 at 12:56 AM, QuangPhan : @FA @AGV . VD An 5-5 the plates was wrong position . Plz use agv to fix it . thank u April 7, 2025 at 3:25 AM, QuangPhan : @FA NC AN Robot #1 & robot #2 error. Please check it. Thanks. April 7, 2025 at 3:33 AM, (Unknown) left this chatroom. April 7, 2025 at 3:37 AM, QuangPhan : @AGV NC AN . Don't have empty MGZ for machine 6-3, 5-3 . All machines receive empty mgz unevenly. Please check. Thanks April 7, 2025 at 3:38 AM, Hữu Thắng : @MCS April 7, 2025 at 3:42 AM, Shahbaz 샤바즈 MCS/RTD : Job created for NC An 6-3, there are currently less number of empty magazines so magazines coming from stacking are being transferred to Notching. April 7, 2025 at 3:44 AM, Shahbaz 샤바즈 MCS/RTD : The job will be created on the basis of LR time so earlier LR’s will get the material first. April 7, 2025 at 4:02 AM, QuangPhan : Thank you. April 7, 2025 at 6:10 AM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 10+2/12(+1) Tech, 1Sl Overtime(2): Szabadi Miklós, Kiss Balázs Holiday(+1): (+Radics András) Sick(1): Gerbovits Kevin, Rácz Dániel --------------- Electrode(4): Kiss Balázs, Szabadi Miklós, Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A techn April 7, 2025 at 6:28 AM, Zaya/ivancsa FA invited Baataraa FA. April 7, 2025 at 7:45 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 07 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 7, 2025 at 8:31 AM, Dmytro Poluekto : Hello everyone, line 6 st area AGV #10 stopped, please check April 7, 2025 at 8:35 AM, Dmytro Poluekto : @Zaya/ivancsa FA hello, please check) April 7, 2025 at 8:35 AM, Böröcz Tamás : Hello. There is a plate on the port where the agv want to unload. Solution 1: take off the plate from the port Solution 2: ask MCS member to send away the AGV. April 7, 2025 at 8:36 AM, Dmytro Poluekto : Okay, We'll do everything now) April 7, 2025 at 8:37 AM, Böröcz Tamás : Which one? April 7, 2025 at 8:37 AM, Sazzad Bhai SKon : Yes you're right. For creating manual jobs: please first try from AGV. If it is not successful please let MCS know. Thanks April 7, 2025 at 8:39 AM, Böröcz Tamás : AGV successfully unloaded April 7, 2025 at 8:39 AM, Dmytro Poluekto : Problem was solved) April 7, 2025 at 8:41 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 292 - Anode: 264 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 03 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 73 - Anode: 122 April 7, 2025 at 9:18 AM, Tumruu/투머르/IvancsaFA : Pls help I wanted to give material on the third page of the anode, but it is closed. What should I do about this? April 7, 2025 at 9:19 AM, Tumruu/투머르/IvancsaFA : Anode 5-3 April 7, 2025 at 9:19 AM, Tumruu/투머르/IvancsaFA : Vd April 7, 2025 at 9:19 AM, Sazzad Bhai SKon : The chamber is full April 7, 2025 at 9:20 AM, Tumruu/투머르/IvancsaFA : yes April 7, 2025 at 9:21 AM, Sazzad Bhai SKon : The chamber is full and VD process just started. It will take time to finish this process. But why do you want to open the chamber now? April 7, 2025 at 9:22 AM, Böröcz Tamás : We don't want April 7, 2025 at 9:22 AM, 이한웅(삼구) : Why was the job created when LR was not raised in the facility? April 7, 2025 at 9:23 AM, Böröcz Tamás : Today 6-7 times agvs want to load the already loaded April 7, 2025 at 9:23 AM, Sazzad Bhai SKon : Hello manager, there was LR at 7:24 from this 5-3 line Anode April 7, 2025 at 9:23 AM, Böröcz Tamás : Position April 7, 2025 at 9:23 AM, Sazzad Bhai SKon : Please write machine name, I'll check the reason April 7, 2025 at 9:24 AM, Böröcz Tamás : C5VDA030 April 7, 2025 at 9:24 AM, Böröcz Tamás : But already happened stacking line 4-5-6 April 7, 2025 at 9:24 AM, Böröcz Tamás : . April 7, 2025 at 9:27 AM, 이한웅(삼구) : The materials have been loaded, and the VD chamber has started. I’m asking why the AGV brought the materials. Was there another material request afterward? April 7, 2025 at 9:29 AM, Böröcz Tamás : this is today's specialty. April 7, 2025 at 9:35 AM, Csanálosi Gábor FA : @Sazzad Bhai SKon pls reset the alarm for ca agv acs, no errors there. April 7, 2025 at 9:37 AM, Sazzad Bhai SKon : Please write AGV name. April 7, 2025 at 9:39 AM, Csanálosi Gábor FA : In MCS i see the agv root in alarm, what basically means there is an error. But there isnt now. April 7, 2025 at 9:41 AM, Sazzad Bhai SKon : @Böröcz Tamás There was load request at 7.24. Job created but for port 3/4 the jobs has been aborted many times. So MCS gave multiple commands to complete the job April 7, 2025 at 9:45 AM, Csanálosi Gábor FA : I deleted the recent jobs for agv 5, there is sitting on the side with the materials. April 7, 2025 at 9:50 AM, Csanálosi Gábor FA : Was agv 6 sry April 7, 2025 at 9:53 AM, Sazzad Bhai SKon : It had a job for 5-3 line. MLA4079 April 7, 2025 at 10:45 AM, Sazzad Bhai SKon : If you have similar issues please tell us. April 7, 2025 at 10:59 AM, Böröcz Tamás : @Sazzad Bhai SKon there are 3 "lazy carrier" warnings in MCS but we cannot reset because vehicles unavailable. Could you please remove the carriers? April 7, 2025 at 11:03 AM, Sazzad Bhai SKon : We don't see any problem on MCS order April 7, 2025 at 11:21 AM, Böröcz Tamás : 2025-04-02 17:11:57 UNK250403001127937ON 2025-04-02 17:17:39 MLC2195 2025-04-02 17:11:57 UNK250403001127937IQ April 7, 2025 at 11:35 AM, Böröcz Tamás : In ACS there are none of them so it have to be stucked in MCS April 7, 2025 at 11:37 AM, Böröcz Tamás : If you could share which AGV was dedicated for these magazines maybe I could remove them April 7, 2025 at 11:37 AM, Sazzad Bhai SKon : The following carriers were installed on AGV #08 at 03/04/2025 02:11:27 UNK250403001127937ON UNK250403001127937IQ But of them were removed from the AGV at 02:17 April 7, 2025 at 11:38 AM, Böröcz Tamás : But the warning is there and if an error occurs we cannot see the sign April 7, 2025 at 11:41 AM, Böröcz Tamás : But it is in the interest of SK that we notice the error as soon as possible. It is enough for me if we go there when the SL ask us. April 7, 2025 at 11:43 AM, Sazzad Bhai SKon : This is AGV issue. Please write me your email, I'll provide a detailed scenario of this April 7, 2025 at 11:48 AM, Böröcz Tamás : I don't know what happened but now it's good April 7, 2025 at 11:48 AM, Böröcz Tamás : Thanks April 7, 2025 at 11:49 AM, Böröcz Tamás : I have no access to emails but I forwarded to my shift leader April 7, 2025 at 12:09 PM, Debreczeni Ármin : C1cnv072-cv01-mcp Tray data mismatch error April 7, 2025 at 12:10 PM, Böröcz Tamás : Kész April 7, 2025 at 12:10 PM, Böröcz Tamás : This message was deleted. April 7, 2025 at 12:16 PM, Tumruu/투머르/IvancsaFA : Gf vd cat C1stkc72 problem pls check April 7, 2025 at 12:59 PM, Csanálosi Gábor FA : @scs there is a new, strange error since todays maintenance in c1stkc72. "161. Destination operation error#2" it is resetable from kiosk, but its getting very often. April 7, 2025 at 1:11 PM, Csanálosi Gábor FA : @Sazzad Bhai SKon pls check why LTA1675 AND LTA1513 doesnt moving. No dest. April 7, 2025 at 1:12 PM, Sazzad Bhai SKon : LTA1675 was terminated at 9:45 April 7, 2025 at 1:14 PM, Sazzad Bhai SKon : Reason: destination port E0CNVA52_BP05 over capacity April 7, 2025 at 1:25 PM, Shakir (MCS) : We created a job to its source for LTA1675 because it was terminated on CNV and blocked other carriers now LTA1675 moved. Issue has been resolved ✅ Thank you April 7, 2025 at 1:26 PM, Csanálosi Gábor FA : Thank you April 7, 2025 at 2:33 PM, Böröcz Tamás : Every time an AGV put out a plate from A71 a data mismatch error occurs April 7, 2025 at 3:40 PM, Shakir (MCS) : @FA Please check port E0STKA51_P03 is OOS, several carrier are waiting on CNV. Thank you April 7, 2025 at 3:44 PM, Csanálosi Gábor FA : Solved April 7, 2025 at 4:31 PM, Lan Nhi : Reel line 5 warehouse is broken. Please help me check. AN/GF April 7, 2025 at 4:32 PM, Böröcz Tamás : Where is it April 7, 2025 at 4:44 PM, Lan Nhi : it has been down for over an hour April 7, 2025 at 4:48 PM, Böröcz Tamás : Ok April 7, 2025 at 4:48 PM, Böröcz Tamás : Where is it April 7, 2025 at 4:49 PM, Böröcz Tamás : There is notching VD stacking tab welding packageing April 7, 2025 at 4:49 PM, Böröcz Tamás : No reel line April 7, 2025 at 4:50 PM, Böröcz Tamás : If you can't describe your problem that well, I can't help you. April 7, 2025 at 4:53 PM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca L6 port next to the empty carrier does not return. Tray ID Loss. Please check. April 7, 2025 at 4:55 PM, Shakir (MCS) : @Fa Please check C1STKC72_P22 is OOS. Thank you April 7, 2025 at 6:08 PM, P.Bence A SSL invited K. József A SL L09 and Andrea Zentay. April 7, 2025 at 6:12 PM, VK (mcs) : @FA Please check Anode reel STK A51 LTA0208(0101104) LTA0559(0201104) LTA1768(0201106) Carriers are in the rack and they aborted by storage but status in SCS is still (retrieve reserved). Please store them inside the zone April 7, 2025 at 6:18 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 3 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 7, 2025 at 6:19 PM, VK (mcs) : @FA Also please check E0STKA51 LTA0254 It’s in M06 and job aborted by storage. Please restore it April 7, 2025 at 7:54 PM, Debreczeni Ármin invited Yosyp Tovt. April 7, 2025 at 8:20 PM, VK (mcs) : @FA Please check Anode reel STK A52 MCP auto/manual mode error. April 7, 2025 at 8:28 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Travel driver error! April 7, 2025 at 10:26 PM, VK (mcs) : @FA This issue still not solved, please check it out April 7, 2025 at 10:48 PM, VK (mcs) : @FA @manufacturing RTD received. LR for VD anode 6/5 at 13:44 , but equipment is OoS due to request of operation’s, Is it still under maintenance? April 7, 2025 at 11:45 PM, VK (mcs) : This message was deleted. April 7, 2025 at 11:51 PM, VK (mcs) : @Noémi (소미) Can you please refer it to the tonight's Korean technicians. Thx April 7, 2025 at 11:54 PM, Kertész Dániel : We will check this, sorry for the late reply! April 8, 2025 at 12:01 AM April 8, 2025 at 12:01 AM, 방혁 PM(Bang.Hyuk) FA : Can you check again? April 8, 2025 at 12:02 AM, VK (mcs) : Checking April 8, 2025 at 12:03 AM, 방혁 PM(Bang.Hyuk) FA : Solved April 8, 2025 at 12:04 AM, VK (mcs) : Yes thank you, it's fine now April 8, 2025 at 12:04 AM, 방혁 PM(Bang.Hyuk) FA : Thank you! April 8, 2025 at 2:28 AM, Mr.Miti (미티) FA invited Édl Tamás. April 8, 2025 at 4:33 AM, VK (mcs) : @FA Please check Anode reel STK A52 Travel driver error! April 8, 2025 at 5:31 AM, VK (mcs) : @FA Please check Cathode post -STK C72 Load oversize error! April 8, 2025 at 6:07 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10/12(+1) Tech, 1Sl Overtime(0): Holiday(1+1): Kovács Ágnes, (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Pintye Miklós, Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyi April 8, 2025 at 6:21 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD CA #41(5-5) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 8, 2025 at 6:43 AM, Uyanga FA : done April 8, 2025 at 7:46 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 322 - Anode: 267 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 00 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 69 - Anode: 112 April 8, 2025 at 8:25 AM, 배병민 (Bae Byoungmin) : @김대웅 Kim Daewung PM님 안녕하세요 금일, 명일간 Reel 창고 예방 보전 계획이였으나, 전극 생산 계획 반영으로 하기 일정으로 변경하여 진행 예정입니다. 진행에 문제되는 부분이 있는지 확인 부탁드립니다. 변경일정 메일 공유 드리겠습니다. 4/9 양극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 4/10 음극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 April 8, 2025 at 8:28 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 8, 2025 at 8:38 AM, Shakir (MCS) : @VD @manufacturing @ @maintenance team @FA RTD received. LR for VD anode 6/5 at 13:44 , but equipment is OoS due to request of operation’s, Jobs are alternated. Is it still under maintenance? Thank you April 8, 2025 at 8:50 AM, Shakir (MCS) : @FA Please check Anode reel STK A51 LTA0174(0102702) Carriers are in the rack and they aborted by storage but status in SCS is still (retrieve reserved). Job still exist in MCS. Thank you April 8, 2025 at 8:53 AM, Csanálosi Gábor FA : I dont see any jobs for LTA0174 IN STKA51 on scs page April 8, 2025 at 8:54 AM, Shakir (MCS) : Yes, because it was aborted due to Port interface error. April 8, 2025 at 8:55 AM, Csanálosi Gábor FA : And where is that carrier at? April 8, 2025 at 8:55 AM, Shakir (MCS) : See here April 8, 2025 at 8:56 AM, Csanálosi Gábor FA : No, the shelf is reserved for that, but no carrier there yet. April 8, 2025 at 8:57 AM, Shakir (MCS) : According to MCS E0STKA51(0102702) April 8, 2025 at 8:57 AM, Böröcz Tamás : And what do you want? April 8, 2025 at 8:58 AM, Csanálosi Gábor FA : According to scs, that is RETRIEVE reserved for LTA0174, but no carrier there yet. April 8, 2025 at 8:59 AM, Shakir (MCS) : Alright, Thanks April 8, 2025 at 9:58 AM, Sazzad Bhai SKon : VD anode 6-5 line is oos and several jobs are pending. April 8, 2025 at 10:42 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 341 - Anode: 274 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 02 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 56 - Anode: 122 April 8, 2025 at 10:44 AM, 전 운 (Jeon Woon) : @FA GF CA측 ST 순환 C/V Out M01 Port 플레이트 배출 할때 하부 Roller 구동이 안되서 빼기 힘든데 확인좀 가능하신가요? April 8, 2025 at 1:17 PM, Mykhailo : Hallo. Vacuum Drying (Anode) Stocker #2 GF C1STKA72 one lifting crane C01 is not working. we need help to solve this problem April 8, 2025 at 1:24 PM, Csanálosi Gábor FA : Korean technicians working on it, thats why offline April 8, 2025 at 1:24 PM, 전 운 (Jeon Woon) : @FA GF AGVs are not working at all. Please check quickly. April 8, 2025 at 1:25 PM, Csanálosi Gábor FA : Which area? April 8, 2025 at 1:26 PM, 전 운 (Jeon Woon) : I think it might be due to a Anode crane problem. April 8, 2025 at 1:27 PM, Csanálosi Gábor FA : Anode? Cathode? Stacking? VD? Notching? Where? April 8, 2025 at 1:35 PM, Csanálosi Gábor FA : No agv is in error on gf assembly all area. @Shakir (MCS) pls check why the agvs (i guess on stacking ca) doesnt have jobs. April 8, 2025 at 1:39 PM, Shakir (MCS) : This message was deleted. April 8, 2025 at 1:39 PM, Shakir (MCS) : There is NO job for 5 and 6, all agvs are idle condition. No error. Thank you April 8, 2025 at 1:43 PM, JUNG WOO PARK : In stacking area, anode eletrode sheets are not coming out from after storage April 8, 2025 at 1:49 PM, 전 운 (Jeon Woon) : We are not receiving An supply on 5Line. Please check quickly. April 8, 2025 at 1:54 PM, Shakir (MCS) : There is No search lot available at CNV for AN because AN warehouse is OOS. April 8, 2025 at 1:57 PM, Shakir (MCS) : There is 6 job exits for AN as soon as the carrier reached the output of CNV, Job will create for AN ST. Thank you April 8, 2025 at 1:58 PM, Shakir (MCS) : @FA Is there any maintenance going on A72 stk ?, there is shortage of ST material. Thank you April 8, 2025 at 2:00 PM, Csanálosi Gábor FA : Korean technicians still working on it April 8, 2025 at 2:01 PM, Shakir (MCS) : Thank you for your update April 8, 2025 at 2:02 PM, JUNG WOO PARK : @전 운 (Jeon Woon) 조장님, 음극 부족으로 인한 stacking 호기 스탑 발생시 공유 및 시간 기록 부탁 드립니다. April 8, 2025 at 2:03 PM, 전 운 (Jeon Woon) : 네 알겠습니다. April 8, 2025 at 2:07 PM, JUNG WOO PARK : 5라인은 음극 자재 부족으로 인해 라인 정지 발생 했습니다. 14:05~ 6라인 음극 수동으로 나눠서 5라인 생산 진행 하겠습니다. 빠른 확인 요청 드립니다. April 8, 2025 at 2:12 PM, Csanálosi Gábor FA : As i see, C1STKA72 is back online, but only in one crane mode. C01 need more maintenance i guess. April 8, 2025 at 2:14 PM, 인제(Hwang) : NC Ca Robot#2 Error April 8, 2025 at 2:22 PM, Csanálosi Gábor FA : Done April 8, 2025 at 2:38 PM, Shakir (MCS) : Now 4 job has been initiated for AN. Carrier on the way. Thank you April 8, 2025 at 2:40 PM, Csanálosi Gábor FA : C1stka72 is online with both crane again April 8, 2025 at 2:43 PM, 전 운 (Jeon Woon) : @MCS Please initialize An LR of 6Line station. We need to fill 5Line first. April 8, 2025 at 2:45 PM, Shakir (MCS) : Do you means stop LR for Line 6 because you want supply on line 5 only ? April 8, 2025 at 2:47 PM, Shakir (MCS) : Job has been already initiated for line 6 6-16 and 6-14 machines. April 8, 2025 at 2:51 PM, 전 운 (Jeon Woon) : Yes. April 8, 2025 at 2:52 PM, 전 운 (Jeon Woon) : Ok that is fine. April 8, 2025 at 2:52 PM, 심재훈 : GF후창고 책임자가 누구 실까요? 언제 정상화 될까요? April 8, 2025 at 2:52 PM, Böröcz Tamás : Mit jelent a normális? April 8, 2025 at 2:55 PM, Shakir (MCS) : Now the material supply normalized, Job is getting initiated for line 5. Thank you April 8, 2025 at 3:11 PM, 심재훈 : Are they working now? Or do we need a manual transfer? April 8, 2025 at 3:12 PM, Shakir (MCS) : Its Working now material on the way for AN. Thank you April 8, 2025 at 3:15 PM, 전 운 (Jeon Woon) : Can you please re-enable 6Line An LR? April 8, 2025 at 3:15 PM, Shakir (MCS) : Which equipment? April 8, 2025 at 3:17 PM, Shakir (MCS) : LR received for all equivalent from 6 lone April 8, 2025 at 3:17 PM, Shakir (MCS) : *Line April 8, 2025 at 4:55 PM, Lan Nhi : @FA VD/ AN #50 agv cannot put magazine into dryer. April 8, 2025 at 5:35 PM, 전 운 (Jeon Woon) : @MCS 5Line C5STM180_P02 There is no plate, but UR is pressed. Please reset it. April 8, 2025 at 6:08 PM, Eduard SL Shift A : Line 5 ST11 AGV 5 stopped April 8, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (4): Cehmann Zsolt Sebestyén Dávid István Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 8, 2025 at 6:54 PM, P.Bence A SSL : L6 left side full mgz not coming please check thank you .. April 8, 2025 at 6:56 PM, VK (mcs) : 3 AGVs on the way April 8, 2025 at 7:10 PM, VK (mcs) : @FA Please check Anode reel STK A51 LTA0174 (0102702) Job aborted by storage but shelf status still remains in (retrieve reserved) please modify it. April 8, 2025 at 7:25 PM, 강진복 Kang Jinbok : @Fa An Robot#1 Please check the stop. April 8, 2025 at 7:31 PM, Eduard SL Shift A : Line 5 ST19 AGV 5 stopped April 8, 2025 at 9:22 PM, P.Bence A SSL : L5-6 stacking magazin supply very slow please check April 8, 2025 at 9:24 PM, VK (mcs) : Material is waiting for AGVs Currently, all the AGVs are busy. April 8, 2025 at 9:28 PM, VK (mcs) : @FA Please check Anode Post-STK A72 port 2(16033) PIO TR off time over error! April 8, 2025 at 9:31 PM, Dariimaa/다리마/Ivancsa : Solved April 8, 2025 at 9:42 PM, P.Bence A SSL : L5-6 stacking Ca magazine not coming please check ….. April 8, 2025 at 9:45 PM, P.Bence A SSL : The line will stop if the situation doesn't change because no magazine is coming to the line... April 8, 2025 at 9:45 PM, P.Bence A SSL : L6 stacking agv 8 stop before warehouse please check thank you April 8, 2025 at 9:49 PM, VK (mcs) : There is overall 8 AGVs for lines 4, 5 and 6 and all of them are busy. Reason of the phenomenon is : number of orders ( UR and LR ) is high There is no any issue for supplying material from STK and the conveyor. April 8, 2025 at 9:58 PM, Eduard SL Shift A : Line 6 ST16 AGV 8 stopped April 8, 2025 at 10:06 PM, P.Bence A SSL : Line 5 Agv6 stop before warehouse please check thank you …. April 8, 2025 at 10:08 PM, P.Bence A SSL : Solved April 8, 2025 at 10:21 PM, 최근종(Choi Geunjong) : @방혁 PM(Bang.Hyuk) FA 안녕하세요 피엠님 ST 5라인 /6라인 Ca 매거진 자재공급 지연되고있는데 확인 부탁드립니다 April 8, 2025 at 10:25 PM, 방혁 PM(Bang.Hyuk) FA : 넵 April 8, 2025 at 10:34 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Can you check available lot for st 5,6L? April 8, 2025 at 10:35 PM, VK (mcs) : Checking April 8, 2025 at 10:37 PM, VK (mcs) : Next LOT available GF Stacking Anode:125 Cathode:52 April 8, 2025 at 10:43 PM, 방혁 PM(Bang.Hyuk) FA : Thank you April 8, 2025 at 10:46 PM, VK (mcs) : There was a huge number of UR and LR for lines 5 and 6 at same time, and all AGVs are busy. That's why supplying material for stacking is delayed April 8, 2025 at 10:47 PM, 방혁 PM(Bang.Hyuk) FA : Yes I checked but in my guess,72STK was out of service around lunchtime today and there has been traffic since then April 8, 2025 at 10:49 PM, 방혁 PM(Bang.Hyuk) FA : 물량 해소까지 2시간이상 걸릴것같습니다. 스택 설비 비가동된다면 시간공유 부탁드립니다... @최근종(Choi Geunjong) April 8, 2025 at 10:52 PM, 방혁 PM(Bang.Hyuk) FA : Do you know hou much orders make in same time? April 8, 2025 at 10:54 PM, VK (mcs) : Right now for line 6 23 orders exists Line 5 17 orders April 8, 2025 at 10:56 PM, 최근종(Choi Geunjong) : @P.Bence A SSL 알겠습니다 April 8, 2025 at 10:56 PM, 방혁 PM(Bang.Hyuk) FA : 주임님 저희 설비가 비가동되거나 가동에 문제가 있지는 않았습니다. 근데 LR이랑 UR명령들이 몇십개씩 동시에 생성되고 있는데...오퍼레이터 분들이 LR,UR안누르다가 한번에 누르는건 아닌가 모르겠습니다 April 8, 2025 at 11:19 PM, 강진복 Kang Jinbok : Nc AN 5-1 Agv#1 Please check the stop. April 8, 2025 at 11:34 PM, 최근종(Choi Geunjong) : 자재공급 지연으로 스테이션 리셋 후 LR/UR 동시에 클릭으로 추정됩니다 위 내용은 리더에게 전달했으며 지금 원활하게 자재 공급되고 있습니다 감사합니다 April 8, 2025 at 11:39 PM, P.Bence A SSL : L6 stacking AGV3 stop please check thank you . April 9, 2025 at 1:56 AM April 9, 2025 at 1:56 AM, 강진복 Kang Jinbok : Please check Ca VD UR. I haven't had AgV for about 2 hours. April 9, 2025 at 1:56 AM, VK (mcs) : Which equipment? April 9, 2025 at 2:02 AM, VK (mcs) : @FA @ACS Please check Cathode VD. AGVs stopped. April 9, 2025 at 2:05 AM, 강진복 Kang Jinbok : In all machines where drying is complete, magazine unloading is not performed. April 9, 2025 at 2:05 AM, VK (mcs) : We received UR from some equipment at 1:25 Currently there is issue with AGVs. April 9, 2025 at 2:08 AM, VK (mcs) : There was an error in AGV 5 and it was blocked the way. Now it solved and material will transfer soon. Thx April 9, 2025 at 2:11 AM, VK (mcs) : @강진복 Kang Jinbok Do you have any info about Anode VD 6/5? Is it still under maintenance? Some jobs are pending.! April 9, 2025 at 2:16 AM, 강진복 Kang Jinbok : An 6-5 repair completed / There is nothing inside the chamber. April 9, 2025 at 2:18 AM, VK (mcs) : Okay then in this case I will return it to in-service and material will be delivered it soon as well. Thx April 9, 2025 at 4:38 AM, VK (mcs) : @FA Please check Cathode reel STK C51 Travel driver error! April 9, 2025 at 6:18 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13 Overtime (0):- Sick (2):Nagy Zsolt, Kasztel Balázs Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(3): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 9, 2025 at 6:21 AM, Mohammad Amir : @Novák Károly F. A. @FA Please check C1STKA72_C01 there is Ready off during Forking error and because of this there is no stacking materials available please fix this error on priority. Thank you very much! April 9, 2025 at 6:22 AM, Novák Károly F. A. : Checking April 9, 2025 at 6:43 AM, Novák Károly F. A. : Solved April 9, 2025 at 6:43 AM, Mohammad Amir : Thank you very much! April 9, 2025 at 7:08 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C01 there is Crane distance Error. Thank you very much! April 9, 2025 at 7:24 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC52_C02 there is Load Oversize Error. Thank you very much! April 9, 2025 at 7:40 AM, Tumruu/투머르/IvancsaFA : Hi pls check gf_stc_charger_01 no charge April 9, 2025 at 7:45 AM, Novák Károly F. A. : Solved April 9, 2025 at 7:47 AM, Ivan Chobitko : Good morning @fa Please check AGV 1 Line 5 ST 16 Fork on place abnormal April 9, 2025 at 7:49 AM, Ivan Kasian Sl 5L 🥹 : They are already working April 9, 2025 at 7:53 AM, Elena SL : Good morning @FA please check AGV #10 near L6 ST. thank you April 9, 2025 at 7:57 AM, Elena SL : Problem not solved! Please check again April 9, 2025 at 7:58 AM, Dániel Hufnágel : Just a moment please April 9, 2025 at 7:58 AM, Elena SL : Thank you 🙏 April 9, 2025 at 8:15 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKA71_C01 there is Port interface Error. Thank you very much! April 9, 2025 at 8:15 AM, Mohammad Amir : C1STKA72*** April 9, 2025 at 8:17 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 9, 2025 at 8:48 AM, 최정한.KOVA : VD 음극 5-5하부우측 안착불량입니다. AGV재안착해주세요 April 9, 2025 at 9:09 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 350 - Anode: 281 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 30 - Anode: 109 April 9, 2025 at 9:12 AM, 배병민 (Bae Byoungmin) : 금일 Reel 창고 C/V 예방 점검 진행 계획입니다. 작업 전/후로 공지드리겠습니다. 4/8 양극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 Today, we plan to conduct a C/V preventive inspection of the Reel Warehouse. We will notify you before/after the work. 4/8 Anode Reel Warehouse ㄴ 9:30 ~ 12:00 Non-operation April 9, 2025 at 9:13 AM, 최정한.KOVA : VD 양극 5-4 진공펌프쪽 냉각수 점검필요합니다. 냉각수 배관에 이물질 막힘으로 추정됩니다. 진공펌프 마그네트 과부화NG 진공펌프 케이스온도 스위치검출 진공펌프 모터측 온도스위치 검출 냉동기펌프 마그네트 과부하NG April 9, 2025 at 9:15 AM, duzzaman Md (MCS) : Reels Available - CA : 319 AN: 298 April 9, 2025 at 9:57 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52_07_001 there is Data mismatch error and RTV is OOS and it is blocking reels delivery. Thank you! April 9, 2025 at 10:00 AM, Novák Károly F. A. : Checking April 9, 2025 at 10:10 AM, Novák Károly F. A. : This message was deleted. April 9, 2025 at 10:11 AM, Novák Károly F. A. : Korean technicians are repairing. April 9, 2025 at 10:11 AM, Mohammad Amir : Thank you very much for the information! April 9, 2025 at 10:24 AM, Mohammad Amir : @FA @Novák Károly F. A. Could you please check is there any maintenance on C1STKC71 ,it is in Open door error since 9:48 and because of this several jobs are Alternated. Thank you very much! April 9, 2025 at 10:26 AM, Novák Károly F. A. : Korean technicians are repairing. April 9, 2025 at 10:26 AM, Mohammad Amir : Thank you very much for the updates. April 9, 2025 at 11:07 AM, Yulya Kirsanova : Hello, there is a problem. M02 port. The rollers started to creak. Please check if everything is okay. @fa April 9, 2025 at 11:11 AM, Kiss Balázs F.A. : This message was deleted. April 9, 2025 at 11:15 AM, 전 운 (Jeon Woon) : Please don't put it in until FA fixes it. April 9, 2025 at 11:20 AM, 인제(Hwang) : NC Ca Robot#2 Error April 9, 2025 at 11:22 AM, 인제(Hwang) : Ca 5/6Line 공매거진 투입지연 순차적 비가동 발생 중입니다 April 9, 2025 at 11:24 AM, Mohammad Amir : Currently there is maintenance going on C1STKC71 that's why empty CA magazines are not available for 5/6 line NC CA. As soon as maintainance will be over , empty magazine will be available. We are monitoring. Thank you very much! April 9, 2025 at 11:25 AM, Mohammad Amir : @FA @Novák Károly F. A. Is C1STKC71 still under maintenance,there is lack of empty CA magazines. Thank you very much! April 9, 2025 at 11:44 AM, Novák Károly F. A. : Korean technicians are still installing it. We don't know how long it will take. Please contact them. April 9, 2025 at 11:56 AM, Mohammad Amir : Update:- C1STKC71 maintainance has been over. Soon there will be empty magazine available for 5/6 NC CA line. Thank you very much! April 9, 2025 at 12:01 PM, Simon Dávid D SL NC : @FA hello NC CA nem jönnek az úres magazinok ,megnéznétek köszönöm April 9, 2025 at 12:02 PM, Mohammad Amir : There was maintenance on C1STKC71 that's why magazine empty supplies was disrupted. Now,C1STKC71 maintainance has been over. Soon there will be empty magazine available for 5/6 NC CA line. We are monitoring. Thank you very much! April 9, 2025 at 12:03 PM, Simon Dávid D SL NC : @FA hello NC CA #1 yaskawa kiált hibára,megnéznétek köszönöm April 9, 2025 at 12:03 PM, Dániel Hufnágel : Egész idáig koreszok piszkálták a raktárat, kis idő kell mire utoléri magát April 9, 2025 at 12:04 PM, Mohammad Amir : Magazine on the way for 6-3 NC CA . ✅ Thank you! April 9, 2025 at 12:30 PM, 배병민 (Bae Byoungmin) : 양극 Reel 창고 정상 생산 진행중입니다. The anode reel warehouse is now fully operational. April 9, 2025 at 1:05 PM, 전 운 (Jeon Woon) : @Dániel Hufnágel Can we use C1CNV072 M02 port? April 9, 2025 at 1:05 PM, Dániel Hufnágel : Yes please April 9, 2025 at 1:05 PM, Dániel Hufnágel : If still have noise please call me April 9, 2025 at 1:08 PM, 전 운 (Jeon Woon) : Ok.Thank you.~ April 9, 2025 at 1:10 PM, Dániel Hufnágel : You are welcome April 9, 2025 at 1:16 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVC52_RTV01 there is Run time Over Alarm,it is blocking reels delivery. Thank you! April 9, 2025 at 1:20 PM, 전 운 (Jeon Woon) : I just put it in and there's no sound April 9, 2025 at 1:23 PM, Dániel Hufnágel : Thank for your information! April 9, 2025 at 1:23 PM, Novák Károly F. A. : Solved April 9, 2025 at 1:23 PM, Mohammad Amir : Thank you very much! April 9, 2025 at 1:58 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 336 - Anode: 275 VD Pre STK > VD - Cathode: 00 - Anode: 03 VD Post STK > Stacking - Cathode: 43 - Anode: 115 April 9, 2025 at 2:09 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_P27 there is Data Loss error. Thank you very much! April 9, 2025 at 2:12 PM, Yulya Kirsanova : Hello. Agv#6 stopped with error near Staсking IN P10 Please check @fa Thank you so much. April 9, 2025 at 2:17 PM, Koncz Tamás : FA Technicians on training, Mongolian support will help soon! April 9, 2025 at 2:17 PM, Yulya Kirsanova : Thanks a lot. April 9, 2025 at 2:21 PM, Simon Dávid D SL NC : @FA hello #3 robot megálmt NC CA ,megnéznétek köszönöm April 9, 2025 at 2:30 PM, Simon Dávid D SL NC : @FA hello NC CA áll a #7 ,#5 ,#4 AGV és a #2 robot ,#robot megnéznétek. April 9, 2025 at 2:41 PM, Tumruu/투머르/IvancsaFA : Pls check gf nc cat robot 3,2, April 9, 2025 at 2:48 PM, Simon Dávid D SL NC : @FA hello GF NC CA #2 és #3 robot nem működik lassan nem lesz üres magazinuk a gépekbe ellenőrizétek köszönöm April 9, 2025 at 2:58 PM, 인제(Hwang) : please check NC An Robot#1 P13 April 9, 2025 at 2:58 PM, Dániel Hufnágel : @Mohammad Amir Can you check me please C0PVC020_P13? MCS data report incomplete error April 9, 2025 at 2:59 PM, Mohammad Amir : Checking April 9, 2025 at 3:03 PM, Mohammad Amir : Actually we did not receive Magazine palletize report for the carrier MC6439 located at C0PVC020_P13 ,it is the issue and that's why this carrier is not moving. @CCS please check this issue. Thank you very much! April 9, 2025 at 3:04 PM, Koncz Tamás : Can we put back the empty magazines before Robot unloading port? 8037 port? April 9, 2025 at 3:10 PM, Mohammad Amir : Please put magazine in from I/P ports of Gantry that's C0PVC020_P11 or P14. April 9, 2025 at 3:11 PM, Mohammad Amir : It is 8006 and 8009 location in CIM side. Thank you very much! April 9, 2025 at 3:18 PM, Mohammad Amir : Update:- Now issue has been resolved ✅. And now we have MC4525 located at C0PVC020_P13 and we received magazine palletize report for it and job has been Crete for it to destination C6NCC030_P04. Thank you very much! April 9, 2025 at 3:23 PM, Koncz Tamás : 🤜🤛 April 9, 2025 at 3:23 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C02 there is Travel Driver error. Thank you very much! April 9, 2025 at 3:28 PM, Dániel Hufnágel : Just a moment please, we are at belt change April 9, 2025 at 3:29 PM, Mohammad Amir : @Manufacuring Please check and remove C1CNV072_M01 there is 1+2 carriers waiting and it is causing delays in stacking materials delivery. Thank you!! April 9, 2025 at 3:29 PM, Mohammad Amir : This message was deleted. April 9, 2025 at 3:29 PM, Mohammad Amir : Okay, Thank you very much! April 9, 2025 at 3:33 PM, Simon Dávid D SL NC : @FA HELLO NC AN #2 robot megált,megnéznétek köszönöm April 9, 2025 at 3:36 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52_RTV01 there is TR01 INV Alarm and it is causing blockage in reel delivery. Thank you very much! April 9, 2025 at 3:38 PM, Elena SL : @FA please check AGV#8 near L6 April 9, 2025 at 3:46 PM, Novák Károly F. A. : Checking April 9, 2025 at 3:49 PM, Mohammad Amir : Thank you very much! April 9, 2025 at 3:50 PM, Mohammad Amir : @Manufacuring Please check and remove C1CNV072_M01 there is 1+3 carriers waiting now and it is causing delays in stacking materials delivery. Thank you!! April 9, 2025 at 3:53 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check C1CNV072_16_079/81 there is INV-01 Run time Over Error and it is blocking stacking material delivery. Thank you very much! April 9, 2025 at 3:55 PM, 전 운 (Jeon Woon) : GF 5,6Line AGV#4 Many Time Error “INV2 BRK ABNOMAL” Please Checking April 9, 2025 at 4:01 PM, 이주봉PM LEE JUBONG(FA) : This message was deleted. April 9, 2025 at 4:15 PM, Novák Károly F. A. : Done April 9, 2025 at 4:15 PM, Mohammad Amir : Thank you very much! April 9, 2025 at 4:24 PM, Cao thi my linh : Az anód robot hibás. Kifogyott a tálcás mgz a gépből, jöhet a technikus és segít nekünk, köszönöm? April 9, 2025 at 4:28 PM, Péti Gábor : @Dániel Hufnágel April 9, 2025 at 4:28 PM, Novák Károly F. A. : Robots are not packing due to warehouse maintenance. April 9, 2025 at 4:30 PM, Novák Károly F. A. : Korean technicians are repairing. April 9, 2025 at 4:30 PM, Dániel Hufnágel : Nem tudjuk koreások meddig dolgoznak a raktárban, de addig is a helyzet fenn áll April 9, 2025 at 4:52 PM, Cao thi my linh : igen várunk April 9, 2025 at 5:11 PM, Mohammad Amir : For your information, Empty magazine supply for NC AN has been normalized now ✅. Thank you! April 9, 2025 at 5:21 PM, Mohammad Amir : @FA @Dániel Hufnágel Could you please check RTV01_E0CNVA52 ,it is inactive without error and because of this there is several reels waiting on the CNVA52. Please resolve it on priority as AN reels delivery has come to stop. Thank you very much! April 9, 2025 at 5:21 PM, Mohammad Amir : @Novák Károly F. A. April 9, 2025 at 5:21 PM, Dániel Hufnágel : Checking April 9, 2025 at 5:22 PM, Mohammad Amir : Thank you very much! April 9, 2025 at 5:50 PM, Mohammad Amir : Are you still working on E0CNVA52,there is Data Loss error at 07046/047. Thank you! April 9, 2025 at 6:59 PM, 연해리 : This message was deleted. April 9, 2025 at 8:05 PM, T. Gàbornè C SL NC : @FA GF CA VD 6-10 machine stop: Left/Top NFB off state, please send the mgz warehouse. Thank you. April 9, 2025 at 8:32 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1CNV071 track 13028 “Data mismatch error “ Thank you April 9, 2025 at 11:02 PM, T. Gàbornè C SL NC : @Fa Please help me AGV does not unpack in the VD Ca 6-6 oven. Please check and take the warehouse in MGZ. Thank you very much April 9, 2025 at 11:11 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51-C02 there is Travel driver error . Thank you April 9, 2025 at 11:17 PM, Badamaa/Ivancsa FA : solved April 9, 2025 at 11:34 PM, T. Gàbornè C SL NC : @Fa Helló Please check CA Robot#3 MCS Data report incomplete error Thank you. April 10, 2025 at 12:33 AM April 10, 2025 at 12:33 AM, Ynja/ivancsa FA : Please check c1stka72’s crane Center error when first active April 10, 2025 at 12:34 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51-C02 there is Load position error. Thank you April 10, 2025 at 1:24 AM, QuangPhan : @FA Could u please transfer 2 plates ( right side ) in chamber VD AN 5/5 . It seems like sensor was damaged . MA2295 - MA4021 . Thank you . April 10, 2025 at 1:33 AM, Ynja/ivancsa FA : transferred to stk April 10, 2025 at 1:35 AM, QuangPhan : Thank you. April 10, 2025 at 1:45 AM, T. Gàbornè C SL NC : @Fa Megnéznétek CA #51-es reel raktárból miért nem jön reel? Köszönöm szépen. April 10, 2025 at 1:48 AM, Ynja/ivancsa FA : again April 10, 2025 at 2:33 AM, Hữu Thắng : @MCS . Could u please check LR VD AN 5/5 . Thank you April 10, 2025 at 2:36 AM, Shahbaz 샤바즈 MCS/RTD : LR is up for half chamber. April 10, 2025 at 2:39 AM, T. Gàbornè C SL NC : @Fa Hello CA oldalon várunk üres mgz-ra 5#2 gépnél és 6-2-nél megtudnátok nézni miért nem hozz az AGV üres mgz-t. Köszönöm szépen. April 10, 2025 at 2:43 AM, Kertész Dániel : @Shahbaz 샤바즈 MCS/RTD please can you check this? April 10, 2025 at 2:44 AM, Shahbaz 샤바즈 MCS/RTD : LR is already up and waiting for empty magazines at gantry. April 10, 2025 at 2:44 AM, Kertész Dániel : Thank you! April 10, 2025 at 6:20 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt, Holiday (2):Novák Zoltán, Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(4): Zsurbej Zsolt, Novák Károly, Hufnágel Dániel, Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 10, 2025 at 7:02 AM, 카스텔 발라지 F.A. : @MCS Good morning! Could you check please why MCS doesn't show the machines in red when they are faulty? Thank you very much! April 10, 2025 at 7:02 AM, Mohammad Amir : Good morning, Please inform us which machine you are referring to? Thank you! April 10, 2025 at 7:05 AM, 카스텔 발라지 F.A. : C0PVA020 and E0STKC51 April 10, 2025 at 7:07 AM, Mohammad Amir : As I checked currently there is no alarm on the mentioned equipment in CIM side that's why it is also green in MCS side. We will monitor these equipment,for now everything seems fine. Thank you very much! April 10, 2025 at 7:07 AM, 카스텔 발라지 F.A. : now we solvd the errors, but only SCS and CCS showed the error, in MCS everything was green April 10, 2025 at 7:08 AM, 카스텔 발라지 F.A. : Thank you very much! April 10, 2025 at 7:08 AM, Mohammad Amir : Okay we are monitoring if you witness again this scenario please inform us from your side as well. Thank you very much! April 10, 2025 at 7:30 AM, duzzaman Md (MCS) : @FA Could you please check C1SKTKC71_P17/18? There appears to be a light curtain error. Thank you. April 10, 2025 at 7:31 AM, 카스텔 발라지 F.A. : Solved April 10, 2025 at 7:36 AM, Mohammad Amir : Thank you very much! April 10, 2025 at 7:54 AM, Mohammad Amir : @카스텔 발라지 F.A. Please check E0STKA51_C02 there is Port interface Error. Thank you! April 10, 2025 at 8:01 AM, Dániel Hufnágel : I am here(thumbsup) April 10, 2025 at 8:01 AM, Mohammad Amir : Thank you very much! April 10, 2025 at 8:30 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 10, 2025 at 8:52 AM, 배병민 (Bae Byoungmin) : 금일 Reel 창고 C/V 예방 점검 진행 계획입니다. 작업 전/후로 공지드리겠습니다. 4/10 음극 Reel 창고 ㄴ 9:30 ~ 12:00 비가동 Today, we plan to conduct a C/V preventive inspection of the Reel Warehouse. We will notify you before/after the work. 4/10 Cathode Reel Warehouse ㄴ 9:30 ~ 12:00 Non-operation April 10, 2025 at 9:03 AM, Dániel Hufnágel : @Sazzad Bhai SKon Good morning! Can you check me please C0PVC030_P06? There is MLC2077 Plate but is empty, there is no magasine, but MCS side there are 6 full! Can you fix that part for me? April 10, 2025 at 9:06 AM, Mohammad Amir : Checking April 10, 2025 at 9:07 AM, Sazzad Bhai SKon : When there was rack out report the plate was empty April 10, 2025 at 9:14 AM, Dániel Hufnágel : Can you remove for me magasines data(LOT) from the plate MLC2077? April 10, 2025 at 9:17 AM, Dániel Hufnágel : And please checkme the MCS status of C0PVC030_P02 please! April 10, 2025 at 9:17 AM, Mohammad Amir : Checking April 10, 2025 at 9:20 AM, Mohammad Amir : It currently have MLC4034 it is empty and haven't any Lot . However C0PVC030_P02 is currently OOS. Thank you! April 10, 2025 at 9:20 AM, Dániel Hufnágel : We stopped that machine but P02 has 6 empty lot🐒 April 10, 2025 at 9:25 AM, Mohammad Amir : We are checking April 10, 2025 at 9:26 AM, Dániel Hufnágel : Now we taking out on nanual car that 6 lot(magasine) April 10, 2025 at 9:32 AM, Dániel Hufnágel : @Sazzad Bhai SKon @Mohammad Amir Please work on P_06; MLC2077, we want to try start on the machine April 10, 2025 at 9:33 AM, Mohammad Amir : We are analysing the scenario. April 10, 2025 at 9:49 AM, Sazzad Bhai SKon : INVcp01 trip error. We received this error for several times from the machine. But MCS scenario is normal, it was waiting for full carriers at P06 April 10, 2025 at 9:51 AM, Dániel Hufnágel : This error caused by night shift, please just clear that plate on P06 April 10, 2025 at 9:56 AM, duzzaman Md (MCS) : @FA Could you please check E0STKA52 B01 and B02? Track sensor detection abnormalities have been observed since 09:23. Thank you. April 10, 2025 at 9:59 AM, Dániel Hufnágel : Thats just some korean guys April 10, 2025 at 10:00 AM, Mohammad Amir : Thank you very much for the information April 10, 2025 at 10:00 AM, Sazzad Bhai SKon : Please some moments, we're still checking. April 10, 2025 at 10:02 AM, Dániel Hufnágel : Okay, thank you(thumbsup)(thumbsup) April 10, 2025 at 10:10 AM, Sazzad Bhai SKon : Mcs scenario is normal. Please check the gantry April 10, 2025 at 10:10 AM, Mohammad Amir : We have checked and unfortunately we don't have permission to change Lot information for any particular carrier that's why can't update lot information. Thank you! April 10, 2025 at 10:12 AM, Dániel Hufnágel : In that case please removed MLC2077 we take out manually, and we will feed them back soon April 10, 2025 at 10:16 AM, Mohammad Amir : Lot information should be updated automatically. Please check Gantry. Thank you! April 10, 2025 at 10:16 AM, Mohammad Amir : This information has been updated ✅. Thank you! April 10, 2025 at 10:33 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKC71_C02 there is Ready off During Forking. This causing several jobs to be delayed. Thank you! April 10, 2025 at 10:45 AM, Oláh András : Electrodán vissza kapcsolhatjuk a slitt mögötti cv-t? April 10, 2025 at 10:48 AM, Oláh András : Anod oldal 🫠 April 10, 2025 at 10:48 AM, Dániel Hufnágel : Igen, mehet April 10, 2025 at 10:58 AM, 카스텔 발라지 F.A. : Now C0PVC10 and C0PVC030 are faulty, but C1CNVC71 is green and the ports at the robots are not gray April 10, 2025 at 10:59 AM, Mohammad Amir : Checking April 10, 2025 at 11:00 AM, 카스텔 발라지 F.A. : And the E0STKC51 also everything is green but the C02 is inactive April 10, 2025 at 11:09 AM, Simon Dávid D SL NC : @FA hello # 3 robot NC Ca ,megált nézétek meg léccives ,köszönöm April 10, 2025 at 11:10 AM, 카스텔 발라지 F.A. : Csáó! C0PVC030 ma nem fog működni, PLC-s technikusra vár April 10, 2025 at 12:47 PM, Simon Dávid D SL NC : @FA hello NC CA #1 robot megált ,megnéznétek köszönöm April 10, 2025 at 12:47 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKC51_C02 there is Travel Driver error. Thank you very much! April 10, 2025 at 12:49 PM, Novák Károly F. A. : Kész April 10, 2025 at 12:50 PM, Novák Károly F. A. : Checking April 10, 2025 at 12:50 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 12:52 PM, Novák Károly F. A. : Solved. April 10, 2025 at 12:52 PM, Mohammad Amir : You are welcome! April 10, 2025 at 1:08 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKA71_C02 Load Oversize Error(Left). Thank you very much! April 10, 2025 at 1:09 PM, Novák Károly F. A. : Checking April 10, 2025 at 1:16 PM, Novák Károly F. A. : This message was deleted. April 10, 2025 at 1:17 PM, Novák Károly F. A. : Solved April 10, 2025 at 1:17 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 1:19 PM, Novák Károly F. A. : You are welcome. April 10, 2025 at 1:29 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKA71_C02 Load Oversize Error(Left) again. Thank you very much! April 10, 2025 at 1:32 PM, Dániel Hufnágel : We are checking it! April 10, 2025 at 1:32 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 1:33 PM, Dániel Hufnágel : You are welcome April 10, 2025 at 2:05 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKC51_C01 there is Crane distance error. Thank you! April 10, 2025 at 2:16 PM, Mohammad Amir : @카스텔 발라지 F.A. Please check E0CNVA52_M06 there is Light curtain error. Thank you! April 10, 2025 at 2:20 PM, Mohammad Amir : @Novák Károly F. A. Please check E0STKA51_C01 and C02 it is not moving since 13:42 without error and because of this there is a queue of recovery reels at CNVA52. Thank you very much! April 10, 2025 at 2:38 PM, Novák Károly F. A. : Checking April 10, 2025 at 2:38 PM, Mohammad Amir : Thank you very much! April 10, 2025 at 3:08 PM, Zsurbej Zsolt F.A. : @Mohammad Amir Can you please check the C0PVC010_P07? It is on a plate with empty magazines (MLC2091) but in MCS the port is empty April 10, 2025 at 3:09 PM, Mohammad Amir : Checking April 10, 2025 at 3:09 PM, Cao thi my linh : Az anódoldali robot elromlott. Jöhet egy technikus és segít nekünk? Köszönöm. April 10, 2025 at 3:10 PM, Zsurbej Zsolt F.A. : AGV or Yaskawa? April 10, 2025 at 3:11 PM, Mohammad Amir : Information has been updated as requested ✅ Thank you! April 10, 2025 at 3:12 PM, Cao thi my linh : robot elakadt Köszönöm April 10, 2025 at 3:17 PM, Dániel Hufnágel : @Mohammad Amir Can you delete gf chatode VD 6-6 AGV command? Manufacturing have to redo the procces! April 10, 2025 at 3:18 PM, Mohammad Amir : Checking April 10, 2025 at 3:19 PM, Mohammad Amir : Commands have been cancelled as requested. ✅ Thank you very much! April 10, 2025 at 3:32 PM, Zsurbej Zsolt F.A. : @Mohammad Amir Please removed MLC3195 we take out manually, and we will feed them back soon C0PVC010_P08 April 10, 2025 at 3:33 PM, Mohammad Amir : Working on it! April 10, 2025 at 3:33 PM, Mohammad Amir : ✅ Done. Thank you very much! April 10, 2025 at 3:34 PM, Zsurbej Zsolt F.A. : Thank you April 10, 2025 at 3:34 PM, Mohammad Amir : You are welcome! April 10, 2025 at 3:58 PM, 카스텔 발라지 F.A. : We stopped C0PVC010 Line#2 because the robot does not unload the empty magazines from the plate. April 10, 2025 at 4:00 PM, 전 운 (Jeon Woon) : GF ST AGV #8 Long time Stop. What is the reason? There is still no action taken. April 10, 2025 at 4:01 PM, Dániel Hufnágel : Can you tell me where correctly? April 10, 2025 at 4:26 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKC51_C02 there is Travel Driver error. Thank you! April 10, 2025 at 5:41 PM, Simon Dávid D SL NC : @FA hello NC CA #3 robot megált ,megnéznétek köszönöm April 10, 2025 at 6:03 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 331 - Anode: 255 VD Pre STK > VD 5/6 Line - Cathode: 0 - Anode: 0 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 108 - Anode: 86 April 10, 2025 at 6:05 PM, T. Gàbornè C SL NC : @Fa Helló Please check CA Robot#3 Time out error Thank you. April 10, 2025 at 6:11 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 10 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 10, 2025 at 6:48 PM, T. Gàbornè C SL NC : Dear @Fa CA VD 6_01 stop Left/Bottom NFB off state Please send mgz warehouse, the technicians repair machine start. Thank you. April 10, 2025 at 7:08 PM, Zulaa/졸라/Ivancsa FA : Solved April 10, 2025 at 7:45 PM, QuangPhan : @FA Hello! Please check NC An 5/3 AGV #4 stopped. Thanks April 11, 2025 at 4:32 AM April 11, 2025 at 4:32 AM, Kertész Dániel : @Shahbaz 샤바즈 MCS/RTD Good morning! We have a problem at the anode VD, the C6VDA050_P04 port is empty, but in the ACS there is the MLA0078 plate. This plate is in the C0VGA01_VC07. Please delete the data from the VD machine, and rewrite it into the AGV in place of UNK2504110211347316RP. Thank you so much! April 11, 2025 at 4:36 AM, Shahbaz 샤바즈 MCS/RTD : Good morning, What about P03, Carrier is also removed from P03? P04 has same data in MCS and ACS. April 11, 2025 at 4:40 AM, Kertész Dániel : Yeah, from the P03 the AGV took out the carrier. April 11, 2025 at 4:41 AM, Kertész Dániel : It's also in the AGV7 April 11, 2025 at 4:44 AM, Shahbaz 샤바즈 MCS/RTD : I updated VD 6-5 P04 and aborted the job from MCS, please reset the alarm of AGV#04 April 11, 2025 at 4:48 AM, Kertész Dániel : We started the the AGV4 April 11, 2025 at 4:51 AM, Shahbaz 샤바즈 MCS/RTD : Please return the plate on AGV#07 manually April 11, 2025 at 4:55 AM, Kertész Dániel : Done, now it's headed to the port C1STKA72_P11. Thank you! April 11, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12(+1) Tech, 1Sl Overtime(0): Holiday(2+1): Rácz Dániel, Czeilinger Krisztián (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Csanálosi Gábor, Böröcz Tamás --------------- Assy GF (2): Pintye Miklós, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyisé April 11, 2025 at 6:24 AM, Debreczeni Ármin : Hello please share us the lot quantity April 11, 2025 at 6:30 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 280 - Anode: 203 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 02 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 85 - Anode: 178 April 11, 2025 at 6:46 AM, Lan Nhi : @ FA good morning. please help us with VD/Ca machine 6-7 agv is having an error. please help us April 11, 2025 at 7:07 AM, Zaya/ivancsa FA : done April 11, 2025 at 7:08 AM, Lan Nhi : Thank you very much April 11, 2025 at 7:55 AM, Yon Ko/연커/ : @Böröczki Balázs GF NC CA rtv pls check this. April 11, 2025 at 7:58 AM, Szücs Géza FT-B : This message was deleted. April 11, 2025 at 7:58 AM, Szücs Géza FT-B : @Pintye Miklós FA. légyszi April 11, 2025 at 7:59 AM, Takács Ádám FA Tech : Már itt vagyok April 11, 2025 at 8:20 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 11, 2025 at 11:18 AM, Shakir (MCS) : @FA Please check E0CNVA52_07_052 , turn abnormal error. Thank you April 11, 2025 at 11:21 AM, Pintye Miklós FA. : Korean Synustech is working on it. April 11, 2025 at 11:55 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 275 - Anode: 199 VD Pre STK > VD 5/6 Line - Cathode: 01 - Anode: 03 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 108 - Anode: 198 April 11, 2025 at 12:32 PM, Lan Nhi : GF An 5/3 agv inline error. plz April 11, 2025 at 1:56 PM, 최정한.KOVA : 양극 5-5호기 우측하단 플레이트 안착불량입니다. AGV 재안착 해주세요. April 11, 2025 at 2:49 PM, Lan Nhi : This message was deleted. April 11, 2025 at 2:49 PM, Lan Nhi : VD/CA 6-6 agv cannot take out goods VD/CA 6-2 agv only puts 2 pallets into the machine. Please help. Thanks April 11, 2025 at 2:56 PM, Pintye Miklós FA. : This message was deleted. April 11, 2025 at 6:08 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 11, 2025 at 6:18 PM, VK (mcs) : @FA Please check Anode Post -STK A72 Load oversize error! April 11, 2025 at 6:55 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 11 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 11, 2025 at 6:59 PM, VK (mcs) : @Mr.Miti (미티) FA Please check Anode reel STK A51 LTA0174 (0102702) Job aborted by storage but shelf status still remains in (retrieve reserved) please modify shelf status. April 11, 2025 at 7:16 PM, Mr.Miti (미티) FA : I dont have permisson 🥲 April 11, 2025 at 7:16 PM, VK (mcs) : Okay. thank you 🙏 April 11, 2025 at 7:18 PM, VK (mcs) : @Jun(정우준)_SKOH FA Can you please check this issue, thx April 11, 2025 at 7:32 PM, Jun(정우준)_SKOH FA : okay I will. thx April 11, 2025 at 9:28 PM, 이한웅(삼구) : Please Check NC Ca #2 AGV April 11, 2025 at 9:46 PM, 송민기(Song MinKi) left this chatroom. April 11, 2025 at 9:50 PM, 임석호(Henry) invited 송민기(Song MinKi). April 11, 2025 at 9:50 PM, 임석호(Henry) : . April 11, 2025 at 10:25 PM, Eduard SL Shift A : Line 6 ST #20 AGV 3 stopped April 12, 2025 at 12:54 AM April 12, 2025 at 12:54 AM, Eduard SL Shift A : Line 6 ST #13 AGV 8 stopped April 12, 2025 at 1:27 AM, Eduard SL Shift A : line 5-6 ST slow delivery CA magazine April 12, 2025 at 1:30 AM, VK (mcs) : @FA Please check Cathode post-STK C72 Inactive stop April 12, 2025 at 1:32 AM, Eduard SL Shift A : please check we are not receiving from the CA magazine warehouse April 12, 2025 at 1:41 AM, P.Bence A SSL : Please check line dont have full ca plate … April 12, 2025 at 1:42 AM, VK (mcs) : Issue has been solved. Material now transferring to the CNV output port. April 12, 2025 at 2:19 AM, P.Bence A SSL : L6 stacking Agv 9 stop please check thank you April 12, 2025 at 4:53 AM, Andrea Zentay : @FA Szeretnénk segitseget. 5/8 #44 Fűtőszál csere miatt a magazinokat AGV-vel ki kellene pakolni,ha lehet. Köszönjük előre is. April 12, 2025 at 5:00 AM, Eduard SL Shift A : Line 6ST8 AGV 1 stopped April 12, 2025 at 5:30 AM, VK (mcs) : @FA Please check Anode Post-STK A72 port 2(16033) April 12, 2025 at 5:52 AM, Mohammad Amir : @FA Please check E0STKC51_C02 there is Travel Driver error. Thank you very much! April 12, 2025 at 6:00 AM, Mohammad Amir : @FA Please check this issue on priority:- C1STKA72_P02 it is OOS and stacking Anode materials MLA4121 it is not moving since 3:17 AM today and it is blocking stacking Anode materials supply. Thank you very much! April 12, 2025 at 6:03 AM, 조범희 : Line 6 ST #20 AGV 3 stopped April 12, 2025 at 6:12 AM, Hữu Thắng : @FA Could u please transfer these carrier in VD CA 5/8 to KC72 . The chamber has an error . Thank you April 12, 2025 at 6:15 AM, Mohammad Amir : @FA @Böröczki Balázs Please check E0CNVA52_07_002/005 there is Data Mismatch error. Thank you very much! April 12, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztása válto April 12, 2025 at 6:32 AM, Ynja/ivancsa FA : transferred to stk72 . April 12, 2025 at 6:33 AM, Hữu Thắng : Thank a lot . April 12, 2025 at 6:36 AM, Dmytro Poluekto : @fa Good morning everyone, Line 5/6 is delivering material very slowly, please see what the problem is April 12, 2025 at 6:38 AM, Mohammad Amir : Good morning, Actually there was MLA4121 was not moving since 3:17 AM ,it was located at C1STKA72_P02 and this port was OOS since than and because of this Anode stacking materials delivery was blocked. And materials delivery was affected and that's why you are witnessing delays but now this issue has been fixed and materials delivery has been normalized ✅. I am monitoring the process. Thank you very much! April 12, 2025 at 6:39 AM, Mohammad Amir : @Manufacturing Please check and remove 1+2 carriers from C1CNV072_M01 it will increase the stacking materials delivery speed. Thank you very much! April 12, 2025 at 6:40 AM, Dmytro Poluekto : Thank you very much for your support 🤝 April 12, 2025 at 6:40 AM, Mohammad Amir : You are welcome! April 12, 2025 at 7:01 AM, 조범희 : @fa ST 5,6라인 An매거진 자재 공급이 지연되고있습니다 확인 부탁드립니다 April 12, 2025 at 7:03 AM, Mohammad Amir : Good morning Sir, there was MLA4121 was not moving since 3:17 AM ,it was located at C1STKA72_P02 and this port was OOS since than and because of this Anode stacking materials delivery was blocked. And materials delivery was affected and that's why you are witnessing delays but now this issue has been fixed and materials delivery has been normalized ✅. I am monitoring the process currently AGV#10,#8#9 on the way with materials. Thank you very much! April 12, 2025 at 7:04 AM, Mohammad Amir : Currently available materials for Stacking:- CA-66 AN-170 April 12, 2025 at 7:05 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 303 - Anode: 238 VD Pre STK > VD 5/6 Line - Cathode: 00 - Anode: 02 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 66 - Anode: 170 April 12, 2025 at 7:24 AM, Mohammad Amir : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01 it will increase the stacking materials delivery speed. Thank you very much! April 12, 2025 at 8:11 AM, Mohammad Amir : @FA @Böröcz Tamás Please check E0STKC51_C02 there is Fork#1 Load position error when active and it is causing delays in transfer. Thank you! April 12, 2025 at 8:23 AM, Csanálosi Gábor FA : Done April 12, 2025 at 8:23 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 8:29 AM, Hữu Thắng : @MCS Could u please check the C5NCA030_P03 status . Thank u April 12, 2025 at 8:29 AM, Hữu Thắng : NC AN April 12, 2025 at 8:29 AM, Mohammad Amir : Checking April 12, 2025 at 8:31 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1CNV072_16_144 there is data mismatch error and it is blocking stacking materials delivery. Thank you! April 12, 2025 at 8:32 AM, Mohammad Amir : AGV#4 on the way with empty magazine. ✅ Thank you very much! April 12, 2025 at 8:33 AM, Ynja/ivancsa FA : solved April 12, 2025 at 8:33 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 8:40 AM, Mohammad Amir : Please confirm is C5NCA030_P03 is empty ? Thank you! April 12, 2025 at 8:41 AM, Ynja/ivancsa FA : yes it is empty April 12, 2025 at 8:41 AM, Mohammad Amir : Thank you very much for the confirmation! April 12, 2025 at 8:41 AM, Mohammad Amir : I am working on it. April 12, 2025 at 8:43 AM, Mohammad Amir : Please first check for assigned AGV#4 error Align SW limit "-". Thank you! April 12, 2025 at 8:50 AM, Mohammad Amir : From MCS side now everything is fine ✅. Please check Assigned AGV#4 ,it is not able to deposit , currently it is again in error . Thank you! April 12, 2025 at 8:50 AM, Ynja/ivancsa FA : I am working on it April 12, 2025 at 8:51 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 8:53 AM, Mohammad Amir : Issue has been resolved,now AGV#4 completed the task. ✅. Thank you very much! April 12, 2025 at 9:09 AM, Mohammad Amir : This message was deleted. April 12, 2025 at 9:13 AM, Hữu Thắng : NC CA Line 6 AGV#9 stopped . Plz check it. April 12, 2025 at 9:15 AM, Csanálosi Gábor FA : Its trying to unload, but no space to do that. @Mohammad Amir can you send agv9 elswhere? April 12, 2025 at 9:16 AM, Mohammad Amir : Checking April 12, 2025 at 9:18 AM, Hữu Thắng : Plz wait . I will solved it April 12, 2025 at 9:19 AM, Mohammad Amir : This message was deleted. April 12, 2025 at 9:20 AM, Mohammad Amir : As I checked AGV#9 has Job to put materials at 5-2_P01 and it is empty so materials should get deposited. I am monitoring the process. Thank you very much! April 12, 2025 at 9:20 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 9:21 AM, Mohammad Amir : This message was deleted. April 12, 2025 at 9:22 AM, Hữu Thắng : i’m on it . 5/2 is empty magazines April 12, 2025 at 9:23 AM, Mohammad Amir : Thank you very much! Now as I checked AGV#9 has successfully delivered the Empty magazine to the port. April 12, 2025 at 9:24 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 307 - Anode: 236 VD Pre STK > VD 5/6 Line - Cathode: 00 - Anode: 02 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 71 - Anode: 165 April 12, 2025 at 9:25 AM, Hữu Thắng : Could u please come here to re-start the chamber . The port have space for that . Thank you April 12, 2025 at 9:28 AM, Böröcz Tamás : Done April 12, 2025 at 10:00 AM, Mohammad Amir : @FA @Böröcz Tamás Please check MLA1115 located at C1CNV072_16_100 it is not moving since 9:43 and it is blocking Anode stacking materials delivery. Everything is good from MCS/RTD side , please check physically on priority. Thank you very much! April 12, 2025 at 10:03 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKC71_P17/18 is OOS because of light curtain error and it is blocking materials transfer to 5-2 CA VD. Thank you! April 12, 2025 at 10:04 AM, Ynja/ivancsa FA : solved April 12, 2025 at 10:04 AM, Böröcz Tamás : All done April 12, 2025 at 10:05 AM, Csanálosi Gábor FA : This message was deleted. April 12, 2025 at 10:05 AM, Mohammad Amir : Thank you very much! Stacking materials delivery has been normalized now ✅. I am monitoring the process. April 12, 2025 at 10:05 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 10:05 AM, Böröcz Tamás : Nyugi! Szívj el egy cigit April 12, 2025 at 10:06 AM, Csanálosi Gábor FA : Folyamatban. ;) April 12, 2025 at 10:27 AM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check MLA4074 located at C1CNV072_16_100 it is not moving and it is blocking Anode stacking materials delivery. Everything is good from MCS/RTD side , please check physically on priority as there is no material on the O/P ports of CNV072. Thank you very much! April 12, 2025 at 10:28 AM, Böröcz Tamás : Checking April 12, 2025 at 10:28 AM, Mohammad Amir : Thank you very much! April 12, 2025 at 10:45 AM, Böröcz Tamás : As soon as I got up on the CV, the carrier went away. So one of the sensors must be around the switching limit. But I need to catch the error to adjust the sensitivity of the sensor to solve the problem as soon as possible. Otherwise I might unset the others and cause more downtime. If it happens again please let me know. Thank you. April 12, 2025 at 10:48 AM, Mohammad Amir : Okay,I am monitoring the whole process. At C1CNV072_16_100 carriers stuck two times ,first MLA1151 stuck since 9:43 till 10:04 and for MLA4074 stuck since 10:22 till 10:30. Now everything is fine and stacking materials delivery is normal. I am monitoring and such phenomenon happens again I will inform you. Thank you very much! April 12, 2025 at 10:49 AM, Böröcz Tamás : That's why I guessed there is some problem like that. April 12, 2025 at 10:51 AM, Böröcz Tamás : After the second error there was about 6 carriers after but no error occurs April 12, 2025 at 10:51 AM, Böröcz Tamás : So maybe it will be good April 12, 2025 at 10:52 AM, Mohammad Amir : Yes after MLA4074,6 carriers passed without errors. So at now it seems fine , however I am monitoring for smooth stacking materials transfer of some errors comes up at this port again I will inform you. Thank you! April 12, 2025 at 11:11 AM, Hữu Thắng : @Mohammad Amir Could u please check the NC CA 5/3 . There’s no empty magazine for machine . Thanks April 12, 2025 at 11:13 AM, Mohammad Amir : Checking April 12, 2025 at 11:18 AM, Mohammad Amir : Last Job was terminated at 10:19. Could you please press LR again. Thank you very much! April 12, 2025 at 11:35 AM, Hữu Thắng : Plz recheck April 12, 2025 at 11:35 AM, Mohammad Amir : LR received successfully 11:34 job created. Thank you very much! April 12, 2025 at 11:36 AM, Hữu Thắng : Thank you April 12, 2025 at 11:36 AM, Mohammad Amir : You are welcome! April 12, 2025 at 12:22 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 314 - Anode: 236 VD Pre STK > VD 5/6 Line - Cathode: 02 - Anode: 03 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 71 - Anode: 155 April 12, 2025 at 12:30 PM, Mohammad Amir : For your information now line -5/6 stacking have now almost filled with materials. Thank you very much! April 12, 2025 at 12:47 PM, Mohammad Amir : @FA @Böröczki Balázs Please check E0STKC51_C02 there is Travel Driver error. Thank you very much! April 12, 2025 at 1:41 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 316 - Anode: 235 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 00 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 78 - Anode: 150 April 12, 2025 at 1:51 PM, Hữu Thắng : @FA VD CA Chamber#37 . AGV9 stopped . Plz check it April 12, 2025 at 2:13 PM, Böröcz Tamás : an agvs specialist is needed April 12, 2025 at 2:14 PM, Böröcz Tamás : We have to change the T servo target position from 180-->0 April 12, 2025 at 2:18 PM, Böröcz Tamás : @SYNUSTECH April 12, 2025 at 2:18 PM, Hữu Thắng : NC CA Robot#2 Alarm . Please check it April 12, 2025 at 2:27 PM, Böröcz Tamás : The phenomenon will wait for you. I have time. But maybe manufacturing don't. April 12, 2025 at 2:50 PM, Mohammad Amir : @FA @Böröczki Balázs Please check E0STKC51_C01 there is Crane distance error. Thank you very much! April 12, 2025 at 2:51 PM, Mohammad Amir : @FA @Böröcz Tamás Please check E0STKA51/52_C02 there is Port interface Error. Thank you very much! April 12, 2025 at 3:09 PM, Csanálosi Gábor FA : Done April 12, 2025 at 3:09 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 3:10 PM, Csanálosi Gábor FA : @Mohammad Amir pls empty gf vd ca agv9, we have to line it out. April 12, 2025 at 3:11 PM, Csanálosi Gábor FA : Erm perhaps i accidentally deleted your job for 9 April 12, 2025 at 3:12 PM, Csanálosi Gábor FA : Redo that pls April 12, 2025 at 3:13 PM, Mohammad Amir : Jobs have already been cancelled for AGV#9 VD CA at 15:08. April 12, 2025 at 3:14 PM, Böröcz Tamás : Yes because it's a 💩 April 12, 2025 at 3:16 PM, Böröcz Tamás : But @Csanálosi Gábor FA is not that calm as me. April 12, 2025 at 3:16 PM, Mohammad Amir : Could you please send AGV#9 back to STK and please press LR again. Thank you very much! April 12, 2025 at 3:19 PM, Mohammad Amir : This message was deleted. April 12, 2025 at 3:20 PM, Mohammad Amir : @Manufacturing Please press LR for 5-1 VD CA for P03 and P04 chambers. Thank you very much! April 12, 2025 at 3:21 PM, Csanálosi Gábor FA : I Cant do LR April 12, 2025 at 3:21 PM, Mohammad Amir : @Ynja/ivancsa FA could you please send AGV#9 back to the STK. Thank you very much! April 12, 2025 at 3:22 PM, Mohammad Amir : I already informed manufacturing team they will press LR and jobs will be created automatically. Thank you very much! April 12, 2025 at 3:22 PM, Mohammad Amir : @Csanálosi Gábor FA April 12, 2025 at 3:24 PM, Mohammad Amir : This message was deleted. April 12, 2025 at 3:25 PM, Csanálosi Gábor FA : Thank you April 12, 2025 at 3:25 PM, Mohammad Amir : @Hữu Thắng Could you please press LR for 5-1 VD CA ,P03 and P04 ,there is half chamber situation cause job was accidently cancelled by FA technician. Thank you very much! April 12, 2025 at 3:25 PM, Mohammad Amir : You are welcome! April 12, 2025 at 3:26 PM, Mohammad Amir : @FA @Böröcz Tamás Please check E0STKC51_C01 there is Crane distance error. Thank you very much! April 12, 2025 at 3:26 PM, Hữu Thắng : Okay . Give me few mins . April 12, 2025 at 3:26 PM, Rácz Dániel / FA : @valaki menjen be a C51-be a VD felől. Mi bent vagyunk az Elektróda felől. April 12, 2025 at 3:26 PM, Mohammad Amir : Alright,thank you very much! 🙏 April 12, 2025 at 3:30 PM, Ynja/ivancsa FA : Please check LR? April 12, 2025 at 3:30 PM, Mohammad Amir : Checking. April 12, 2025 at 3:30 PM, Mohammad Amir : LR received successfully at 15:29. Currently no materials available as soon as materials will be available jobs will be created. Thank you very much! April 12, 2025 at 3:31 PM, Hữu Thắng : Thank u April 12, 2025 at 3:31 PM, Mohammad Amir : @Csanálosi Gábor FA , For your information,Issue has been resolved as soon as materials will be arrive jobs will be created for remaining chambers of 5-1 VD CA. Thank you very much! April 12, 2025 at 3:34 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKA72 _C01 there is Load Collapse error (left). Thank you! April 12, 2025 at 3:35 PM, Csanálosi Gábor FA : Soon, we dealing with c51 atm April 12, 2025 at 3:35 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 3:37 PM, Mohammad Amir : C1STKC72* April 12, 2025 at 3:42 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 334 - Anode: 239 VD Pre STK > VD 5/6 Line - Cathode: 02 - Anode: 01 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 67 - Anode: 153 April 12, 2025 at 4:03 PM, Böröcz Tamás : We could not see April 12, 2025 at 4:05 PM, Mohammad Amir : I give confirmation,We have received LR successfully at 15:29 ,just now material is not available as soon as materials will be available jobs will be created for remaining half chamber of 5-1 VD CA ,P03 and 04. Thank you very much! April 12, 2025 at 4:06 PM, Böröcz Tamás : Thanks for the information April 12, 2025 at 4:06 PM, Mohammad Amir : And Carriers located on AGV #9 have successfully stored in the STK. Thank you very much! April 12, 2025 at 4:06 PM, Mohammad Amir : You are welcome! April 12, 2025 at 4:16 PM, 김수민 : If so, when were P01,02 put into the chamber? Can you tell me the time? April 12, 2025 at 4:17 PM, Mohammad Amir : Sure Sir,Checking. April 12, 2025 at 4:21 PM, Mohammad Amir : for P01 and P02 job was completed at 13:14. April 12, 2025 at 4:37 PM, Mohammad Amir : @Csanálosi Gábor FA @FA Please check C1CNV072_16_079 it is OOS and it is blocking stacking materials delivery. Thank you! April 12, 2025 at 4:37 PM, Ynja/ivancsa FA : On my way! April 12, 2025 at 4:38 PM, Mohammad Amir : @FA @Böröcz Tamás Please check MLA4158 C1CNV072_16_100 it is not moving,carrier again stuck on this port and it is also blocking stacking materials delivery. Thank you! April 12, 2025 at 4:38 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 4:44 PM, Ynja/ivancsa FA : both of solved April 12, 2025 at 4:44 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 4:51 PM, Ynja/ivancsa FA : @Mohammad Amir Please check Agv#01 in no ca Now idle April 12, 2025 at 4:51 PM, Mohammad Amir : @CCS Please needs to check C1CNV072_16_100 at this port carrier stucks three times since morning. First Carrier MLA1151,stucked between 9:43 - 10:04 . Second carrier MLA4074 stucked between 10:22-10:30. Third carrier MLA4158 stucked between 16:10 -16:44. It is causing frequent delays in stacking materials delivery. Thank you very much! April 12, 2025 at 4:52 PM, Mohammad Amir : Checking April 12, 2025 at 4:52 PM, Mohammad Amir : Please tell me the area? Thank you very much! April 12, 2025 at 4:53 PM, Ynja/ivancsa FA : Notching cathode April 12, 2025 at 4:53 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 4:55 PM, Mohammad Amir : As I checked this AGV has no job. Thank you! April 12, 2025 at 4:56 PM, Csanálosi Gábor FA : I sent it to yaskawa 3, that agv has the magazines what came out from yaskawa2 few hours before becouse yaskawa error. I trying to send it back to stk April 12, 2025 at 4:56 PM, Mohammad Amir : Please tell me the magazine id. Thank you! April 12, 2025 at 4:57 PM, Csanálosi Gábor FA : I cant, cant you see in the agv? April 12, 2025 at 4:58 PM, Mohammad Amir : Are you sure it was C0NGVC02_VC01? Thank you very much! April 12, 2025 at 4:59 PM, Csanálosi Gábor FA : C0NGVC01_VC01 April 12, 2025 at 4:59 PM, Mohammad Amir : Checking April 12, 2025 at 5:00 PM, Csanálosi Gábor FA : The magzines now at C0PVC030_P12 April 12, 2025 at 5:01 PM, Csanálosi Gábor FA : P11 sry April 12, 2025 at 5:01 PM, Csanálosi Gábor FA : MLC2197 April 12, 2025 at 5:03 PM, Mohammad Amir : Id is MLC2002 and job has been created to send it to pre VD STK. ✅ Thank you! April 12, 2025 at 5:03 PM, Csanálosi Gábor FA : Thank you! April 12, 2025 at 5:03 PM, Mohammad Amir : You are welcome. April 12, 2025 at 5:05 PM, Mohammad Amir : Carrier MLC2002 ,carriering magazine MC1319 has been stored in C1STKC71(0100206) at 17:05 successfully. ✅ Thank you very much! April 12, 2025 at 5:06 PM, Mohammad Amir : @Ynja/ivancsa FA for your information! April 12, 2025 at 5:09 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKA72_C01 there is Fork#1 center error when first active it is delaying stacking Anode materials delivery. Thank you! April 12, 2025 at 5:09 PM, Ynja/ivancsa FA : This message was deleted. April 12, 2025 at 5:10 PM, Csanálosi Gábor FA : Omw April 12, 2025 at 5:16 PM, Mohammad Amir : @Ynja/ivancsa FA Please check C1CNV072_16_155 there is Data Loss error. Thank you very much! April 12, 2025 at 5:17 PM, Ynja/ivancsa FA : solved April 12, 2025 at 5:17 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 5:18 PM, Csanálosi Gábor FA : Done April 12, 2025 at 5:18 PM, Mohammad Amir : Thank you very much! April 12, 2025 at 5:23 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching (Gantry) - Cathode: 336 - Anode: 248 VD Pre STK > VD 5/6 Line - Cathode: 01 - Anode: 03 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 59 - Anode: 155 April 12, 2025 at 5:51 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2+2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 12, 2025 at 6:15 PM, VK (mcs) : @FA Please check Reel STK anode A51 MCP AP error and cathode C51 Load position error! April 12, 2025 at 6:36 PM, Novák Károly F. A. : Checking April 12, 2025 at 6:50 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 12 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 12, 2025 at 7:02 PM, Novák Károly F. A. : Solved April 12, 2025 at 8:07 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Load position error! April 12, 2025 at 8:21 PM, VK (mcs) : @FA Please check Cathode pre-STK C71 Load oversize error! April 12, 2025 at 8:32 PM, Novák Károly F. A. : Solved April 12, 2025 at 8:32 PM, Novák Károly F. A. : Solved April 12, 2025 at 9:58 PM, Eduard SL Shift A : line 5-6 slow delivery CA/AN magazine April 12, 2025 at 9:59 PM, VK (mcs) : There was an error in CNV, Material is on the way now April 12, 2025 at 10:23 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 port(16100) Carrier is not moving! It's blocked the way April 12, 2025 at 10:31 PM, Novák Károly F. A. : Checking April 12, 2025 at 10:35 PM, Novák Károly F. A. : Solved April 12, 2025 at 10:37 PM, VK (mcs) : Thank you May I know what was the problem? It happened several times today. April 12, 2025 at 10:42 PM, Novák Károly F. A. : We're investigating the cause. We don't know for sure yet. April 12, 2025 at 10:49 PM, VK (mcs) : Thank you April 12, 2025 at 11:02 PM, VK (mcs) : @FA Please check Cathode post-STK C72 port 21(13002) Carrier is not moving. April 12, 2025 at 11:06 PM, Novák Károly F. A. : Solved April 12, 2025 at 11:50 PM, Jun(정우준)_SKOH FA : can you check this again please!? April 12, 2025 at 11:53 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching - Cathode: 346 - Anode: 267 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 03 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 28 - Anode: 145 April 13, 2025 at 12:17 AM April 13, 2025 at 12:17 AM, P.Bence A SSL : L5-6 full magazin not coming check please ….. April 13, 2025 at 12:27 AM, VK (mcs) : Materials are waiting for AGVs in CNV ports. There is no issue, just number of order is high. April 13, 2025 at 1:01 AM, 임석호(Henry) : 안녕하세요 스택 전극공급량이 모자랍니다 확인부탁두립니다 April 13, 2025 at 1:05 AM, 임석호(Henry) : An' 이 스테이션으로 배송이 안됩니다 스테이션 거의다 비어있는상태 입니다 April 13, 2025 at 1:05 AM, 임석호(Henry) : @Jun(정우준)_SKOH FA April 13, 2025 at 1:10 AM, 임석호(Henry) : 약 한시간 반 정도 뒤 6라인 비가동 발생예정 2~3시간뒤 5라인 비가동 발생 예정입니다 April 13, 2025 at 1:10 AM, Jun(정우준)_SKOH FA : 해당 문제 관련해서 1시간 전부터 미리확인중이었고, 금일 18시~24시까지, 특별한 이슈 X 금일 18시~24시까지, AGV 반송량 44ea/h 유지중입니다. 추가적으로 문제있는지 확인 중이고, 현상황에서도 공급량 부족하면 후창고에서 대차로 매뉴얼 출고해야합니다. 매뉴얼 출고 필요하면 말씀해주세요~ April 13, 2025 at 1:13 AM, 임석호(Henry) : 아 공급량 부족할때 후창고에서 수동으로 매거진 빼는거 주재원 분들이랑 협의 된건가요? 그럼 지금바로 필요합니다 April 13, 2025 at 1:14 AM, VK (mcs) : There is no special problem on STK and CNV side, supply material is going well. The reason of the phenomenon is: we received multiple LR and UR at same time. Currently for line 5 LR : 16 order UR: 5 Order Line 6: LR: 21 order April 13, 2025 at 1:15 AM, 임석호(Henry) : 6라인은 An 대기매거진 하나도 없습니다. April 13, 2025 at 1:17 AM, Jun(정우준)_SKOH FA : 우선 AGV나 CNV가 문제가 있어서 반송이 안되는 상황은 아니고, 약 10분에 1개씩 배송 될건데, 아직 여유가 2~3시간 있으면 1시간정도 지켜 보고 판단해도 괜찮을까요? April 13, 2025 at 1:17 AM, 임석호(Henry) : Due to a conveyor error, while fixing the conveyor, the LR/UR commands were triggered all at once automatically. What kind of action should we take in this situation? April 13, 2025 at 1:21 AM, VK (mcs) : In this case it's better to reduce UR However if it's an emergency case I can clear some UR. and AGVs just transfer full MGZ to machine. April 13, 2025 at 1:27 AM, Jun(정우준)_SKOH FA : it's a good idea. April 13, 2025 at 1:28 AM, VK (mcs) : Should I clear UR? April 13, 2025 at 1:31 AM, Jun(정우준)_SKOH FA : yes please. April 13, 2025 at 1:41 AM, VK (mcs) : All UR cleared. April 13, 2025 at 1:42 AM, Jun(정우준)_SKOH FA : thx April 13, 2025 at 1:43 AM, Jun(정우준)_SKOH FA : 지금 계속 화물이 채워지고 있는데, UR만 오퍼레이터 분들이 누르지 않게 해주실 수 있나요?? April 13, 2025 at 1:44 AM, VK (mcs) : Please inform to operations do not request UR, I already cleared UR but still we are receiving some UR April 13, 2025 at 1:44 AM, 임석호(Henry) : 5-6라인 합쳐서 음극 자재 90% 이상 없어서 비가동 진행하겠습니다 April 13, 2025 at 1:49 AM, Jun(정우준)_SKOH FA : 네, 알겠습니다. April 13, 2025 at 2:37 AM, VK (mcs) : @FA Please check Anode Post-STK A72 port 2 April 13, 2025 at 2:40 AM, P.Bence A SSL invited Elena Dzhul. April 13, 2025 at 2:59 AM, Mr.Miti (미티) FA : @VK (mcs) Please check C1CNV072_P03;P04. I see that no trays are arriving from the warehouse at all for those two ports. April 13, 2025 at 2:59 AM, VK (mcs) : These ports belong to line 4 April 13, 2025 at 3:11 AM, VK (mcs) : @FA Are you working on the cathode reel STK C51? I see door open and oversize error! April 13, 2025 at 3:34 AM, Baek Hojong(백호종)FA : Solved April 13, 2025 at 3:49 AM, 임석호(Henry) : 5라인 스택 5번 AGV 정지했습니다 확인부탁드립니다. April 13, 2025 at 3:54 AM, VK (mcs) : @FA Please check Cathode reel STK C51 Load oversize error! April 13, 2025 at 3:55 AM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 22(13003) April 13, 2025 at 3:55 AM, Novák Károly F. A. : Checking April 13, 2025 at 4:06 AM, Novák Károly F. A. : Solved April 13, 2025 at 4:46 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching - Cathode: 335 - Anode: 255 VD Pre STK > VD 5/6 Line - Cathode: 03 - Anode: 02 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 37 - Anode: 127 April 13, 2025 at 4:50 AM, VK (mcs) : @FA Please check E0CNVC52 April 13, 2025 at 5:02 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) C1STKC71_P13 P14 job not created please check. Thank you! April 13, 2025 at 5:04 AM, Badamaa/Ivancsa FA : please check C1CNV071 Tray data mismatch error April 13, 2025 at 5:04 AM, VK (mcs) : Checking April 13, 2025 at 5:18 AM, VK (mcs) : MLC2077 Job aborted by OP action and created to the wrong destination. I am canceling the job. So please send it to the post-STK and apply LR again for VD C 6/6 ports 1 and 2. April 13, 2025 at 5:24 AM, VK (mcs) : Please transfer MLC2013 in the port 13 as well to post-STK. Thx April 13, 2025 at 6:08 AM, 김수민 : @mcs Plz recheck April 13, 2025 at 6:10 AM, Shakir (MCS) : @FA Please check LTC1441 located at E0CNVC52_09_012 it is not moving and other carriers are waiting. Job getting delayed. Thank you April 13, 2025 at 6:12 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching - Cathode: 330 - Anode: 245 VD Pre STK > VD 5/6 Line - Cathode: 01 - Anode: 00 VD Post STK > Stacking 5/6 Line (CNV) - Cathode: 39 - Anode: 132 April 13, 2025 at 6:18 AM, Böröczki Balázs : Working. April 13, 2025 at 6:19 AM, 김수민 : Plz check CA NC RTV PIO BUSY IN TIME OVER ERROR April 13, 2025 at 6:20 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11+1/12(+1) Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0+1): (+Radics András) Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Fabriczius Gergely, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Boromisza Zoltán, Denkó János --------------- A technikusok elosztá April 13, 2025 at 6:43 AM, Csanálosi Gábor FA : @Kovács Ágnes April 13, 2025 at 7:00 AM, Kovács Ágnes : Solved April 13, 2025 at 7:12 AM, 김수민 : Same alarm, plz recheck April 13, 2025 at 8:30 AM, Debreczeni Ármin : Hello, please share lot quantity. Thank you April 13, 2025 at 8:34 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 342 - Anode: 256 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 24 - Anode: 130 April 13, 2025 at 9:13 AM, Böröcz Tamás : This message was deleted. April 13, 2025 at 10:00 AM, Shakir (MCS) : @FA Please check MLC2006 located at C1CNV072_065 it is not moving Thank you April 13, 2025 at 10:04 AM, Shakir (MCS) : Now, Carrier started to move now, Thank you April 13, 2025 at 10:47 AM, Shakir (MCS) : @FA Please check C1CNV072_16_075&73 is OOS, carriers are waiting . Thank you April 13, 2025 at 11:00 AM, Lan Nhi : @FA NC/CA check for me robot number 1 is broken April 13, 2025 at 11:01 AM, Csanálosi Gábor FA : I cant see error here April 13, 2025 at 11:12 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 340 - Anode: 254 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 34 - Anode: 137 April 13, 2025 at 11:16 AM, Csanálosi Gábor FA : @manufacturing C1CNV072 M02 port has data missmatch error, pls take it out, and back again April 13, 2025 at 11:28 AM, Lan Nhi : The ree line 6 Ca side warehouse is having an error. Please check. Thanks. April 13, 2025 at 11:29 AM, Csanálosi Gábor FA : Sorry? April 13, 2025 at 11:30 AM, Lan Nhi : Thank you. The error was fixed as soon as I sent the message. Sorry for the inconvenience. April 13, 2025 at 11:31 AM, Csanálosi Gábor FA : No problem April 13, 2025 at 11:39 AM, 방혁 PM(Bang.Hyuk) FA : @mcs Please check available lot for ST5,6L April 13, 2025 at 11:44 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 341 - Anode: 252 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 37 - Anode: 136 April 13, 2025 at 11:51 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA hello Gabor Can you check C1CNV072_16079?? April 13, 2025 at 11:52 AM, Csanálosi Gábor FA : Omw April 13, 2025 at 11:52 AM, Csanálosi Gábor FA : Vd agv first April 13, 2025 at 11:54 AM, Zulaa/졸라/Ivancsa FA : Plate error April 13, 2025 at 12:01 PM, Csanálosi Gábor FA : Solved with @Zulaa/졸라/Ivancsa FA 🙏 April 13, 2025 at 12:17 PM, Dmytro Poluekto : @fa Hell, the material is coming into line 6 very slowly, please, please solve this problem April 13, 2025 at 12:21 PM, duzzaman Md (MCS) : 3 jobs exists for line 6. All of them are in AGV We are monitoring the process. April 13, 2025 at 1:17 PM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 345 - Anode: 258 VD Pre STK > VD - Cathode: 02 - Anode: 01 VD Post STK > Stacking - Cathode: 32 - Anode: 133 Thank you! April 13, 2025 at 1:54 PM, 조범희 : 6L ST #3호기 앞에서 AGV 9호기 UR 진행하지 못하고 계속 돌고있습니다 확인 부탁드립니다 April 13, 2025 at 1:55 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA Can you check ST 6L AGV9?? April 13, 2025 at 1:59 PM, Csanálosi Gábor FA : Done, @Zulaa/졸라/Ivancsa FA was faster. :) April 13, 2025 at 2:02 PM, Lan Nhi : Plz An and Ca. RTV hasn't provided reels for a while now. April 13, 2025 at 2:03 PM, Csanálosi Gábor FA : On it April 13, 2025 at 2:04 PM, Shakir (MCS) : For CA E0STKC51 is OOS and for AN RTV is OOS causing delay in reel supply. FA team working on it. Thank you April 13, 2025 at 2:09 PM, Csanálosi Gábor FA : RTV done, c51 under repair April 13, 2025 at 2:10 PM, Lan Nhi : Thank you April 13, 2025 at 2:20 PM, 김수민 : @mcs Can you tell me which plate in the front warehouse the MA4108 is on? April 13, 2025 at 2:22 PM, duzzaman Md (MCS) : Racked in at 14:16 at warehouse C1STKA71 , Destination: Shelf 0201004 Thank you April 13, 2025 at 2:23 PM, duzzaman Md (MCS) : Carrier ID- MLA1148 April 13, 2025 at 2:33 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 음극 전창고 크레인 움직일때마다 소음 크게 발생합니다. 확인 부탁드립니다 April 13, 2025 at 2:38 PM, 김수민 : MA3454 MA1321 MA6550 PLZ check this too April 13, 2025 at 2:42 PM, duzzaman Md (MCS) : This message was deleted. April 13, 2025 at 2:43 PM, duzzaman Md (MCS) : All : Plate- MLA6046 , HAVING ALL MAGAZINE, Location C1STKA71_P16 It's going to VD A 5/4 April 13, 2025 at 2:45 PM, Shakir (MCS) : Now On agv#06UP, going towards 5/4 Thank you April 13, 2025 at 2:52 PM, 방혁 PM(Bang.Hyuk) FA : 넵 April 13, 2025 at 2:53 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA hello gabor Can you check C1STKA71??? About driving noise April 13, 2025 at 3:23 PM, Böröcz Tamás : The door on the crane was not close. April 13, 2025 at 3:50 PM, Lan Nhi : For CA E0STKC51 is OOS not provide reel for a long time. Please check for me Thanks April 13, 2025 at 3:53 PM, Shakir (MCS) : Still STK C51 is OOS, Job exists for line 5 and 6. @FA Is there any maintenance going on ?, we facing lack of reel supply. Thank you April 13, 2025 at 4:20 PM, Debreczeni Ármin : @duzzaman Md (MCS) share lot quantity please April 13, 2025 at 4:26 PM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 340 - Anode: 244 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 33 - Anode: 120 Thank you! April 13, 2025 at 5:09 PM, Lan Nhi : @ MCS. plz machine #39 is done drying April 13, 2025 at 5:10 PM, duzzaman Md (MCS) : CA or AN ? April 13, 2025 at 5:11 PM, Shakir (MCS) : VD 5-3 chamber is OOS April 13, 2025 at 5:11 PM, Shakir (MCS) : CA April 13, 2025 at 5:18 PM, Shakir (MCS) : Job has been initiated for 5-3 VD CA to post VD. Thank you April 13, 2025 at 5:33 PM, Lan Nhi : Sorry. CA April 13, 2025 at 5:33 PM, Lan Nhi : Thank you April 13, 2025 at 6:12 PM, 이한웅(삼구) : please check NC Ca April 13, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 8 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(2): Magyar Imre Vékony Ferenc ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 13, 2025 at 6:41 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 13 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 13, 2025 at 6:42 PM, P.Bence A SSL : L5-6 ca full mgz not coming please check April 13, 2025 at 6:46 PM, Jun(정우준)_SKOH FA : okay. April 13, 2025 at 7:43 PM, Nguyên : NC CA GF ROBOT 2. ROBOT 3. come check for me April 13, 2025 at 8:36 PM, 이한웅(삼구) : Please check NC Ca RTV April 13, 2025 at 11:23 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Reel stk C51, “Crane distance error” Thanks April 13, 2025 at 11:37 PM, Jun(정우준)_SKOH FA : I m on my way. April 13, 2025 at 11:47 PM, Nguyên : This message was deleted. April 13, 2025 at 11:48 PM, Nguyên : GF AN 42 (5-6) VD Please let AGV come and get the goods for me. April 14, 2025 at 12:27 AM April 14, 2025 at 12:27 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cathode reel STK C51 Load position error! Thanks April 14, 2025 at 1:12 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 NC Ca #3 로봇 문제 있는건가요? April 14, 2025 at 1:21 AM, 이한웅(삼구) : • AGV 정지로 인한 비가동 - NC Ca 5-1 00:59~01:17 18분 5-2 00:50~ 5-3 00:22~01:20 58분 6-1 00:15~00:54 39분 6-2 00:48~ 6-3 00:35~ April 14, 2025 at 1:21 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA 확인 부탁드립니다. #2 AGV 공매거진 안착불량 정지중입니다. April 14, 2025 at 1:22 AM, Jun(정우준)_SKOH FA : 확인 해보겠습니다. April 14, 2025 at 3:22 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cathode reel STK C51 Load position error! Thanks April 14, 2025 at 6:12 AM, T. Gàbornè C SL NC : @FA Kérlek nézzétek ré CA oldalon az #51#52-es reel raktárra, nem jönnek a reelek. Köszönöm szépen. April 14, 2025 at 6:19 AM, T. Gàbornè C SL NC : @MCS don't come on the Reels GF CA side. Can you look at the warehouse? Thank you very much April 14, 2025 at 6:20 AM, Shakir (MCS) : CA RTV is OOS causing reel supply delay. @FA Please check E0CNVC52_RTV01 Thank you April 14, 2025 at 6:43 AM, Yon Ko/연커/ : Solved. April 14, 2025 at 6:46 AM, Shakir (MCS) : Thank you April 14, 2025 at 6:51 AM, duzzaman Md (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 338 - Anode: 229 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 34 - Anode: 142 Thank you! April 14, 2025 at 6:59 AM, T. Gàbornè C SL NC : Dear @MCS Reel does not come on GF CA page. If we don't get Reel for 1 hour and stop. April 14, 2025 at 7:02 AM, Shakir (MCS) : There is some issue with warehouse and RTV, causing delay in supply. However job exists for line 5 and 6 line. Thank you April 14, 2025 at 7:03 AM, Shakir (MCS) : @FA Please check the C51 stk travel driver error. Thank you April 14, 2025 at 7:04 AM, T. Gàbornè C SL NC : Thank you for information. April 14, 2025 at 7:09 AM, 김수민 : @fa Plz check ca nc robot#3 April 14, 2025 at 7:32 AM, Kertész Dániel : We don't have any information of the robot, the installation company will check it later. April 14, 2025 at 7:52 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 양극 릴 출고가 너무 더딥니다 확인 한번 부탁드립니다 April 14, 2025 at 8:02 AM, Shakir (MCS) : @FA Please check LTC0887 at E0CNVC52_09_012 not moving. MCS/RTD ✅ Thank you April 14, 2025 at 8:03 AM, Shakir (MCS) : Please check RTV is not moving idle. Thank you April 14, 2025 at 8:19 AM, T. Gàbornè C SL NC : @MCS please check CA reel warehouse#52 no move reels. Thx April 14, 2025 at 8:19 AM, Shakir (MCS) : Checking April 14, 2025 at 8:21 AM, Mohammad Amir : This message was deleted. April 14, 2025 at 8:21 AM, Mohammad Amir : @CCS @FA @방혁 PM(Bang.Hyuk) FA Please check LTC1696 located at E0CNVC52_09_011 ,it is notoving from CCS side ,it is showing "Destination bit off" message and it is notiving causing RTV to be stopped and eventually reels delivery has been stopped . Please take action urgently. Thank you very much! April 14, 2025 at 8:21 AM, Mohammad Amir : For you information! April 14, 2025 at 8:22 AM, Mohammad Amir : The mentioned issue is causing reels delivery blockage ,we have informed the CCS team. Thank you very much! April 14, 2025 at 8:22 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKC51_C02 there is Travel Driver error. Thank you! April 14, 2025 at 8:30 AM, 김수민 : @심재훈 @KIM SEYEON [김세연]_FA 안녕하세요 피엠님 현재 양극 릴 출고 지연이 발생하고 있습니다. 현장에는 잔여 릴이 거의 남아 있지 않아, 릴 공급 부족으로 인해 생산이 곧 중단될 예정입니다. 확인 부탁드립니다. April 14, 2025 at 8:30 AM, Mohammad Amir : @FA @Kertész Dániel Please we need confirmation is LTC1355 currently located at E0STKC51_P02? Thank you very much! April 14, 2025 at 8:31 AM, Mohammad Amir : @FA @Kertész Dániel Please take action on priority on this issue and it will resume the cathode reels delivery. Production will stop. Thank you very much! April 14, 2025 at 8:34 AM, Kertész Dániel : This problem is because the CA RTV is not working well right now April 14, 2025 at 8:35 AM, Mohammad Amir : Please check this issue it is causing RTV to be stopped. Please check LTC1696 located at E0CNVC52_09_011 ,it is notoving from CCS side ,it is showing "Destination bit off" message and eventually reels delivery has been stopped. Please take action urgently. Thank you very much! April 14, 2025 at 8:36 AM, Kertész Dániel : Done. April 14, 2025 at 8:37 AM, Mohammad Amir : Thank you very much, April 14, 2025 at 8:37 AM, Mohammad Amir : I am monitoring further. April 14, 2025 at 8:38 AM, Mohammad Amir : Carrier on the RTV has also moved now. Thank you very much! April 14, 2025 at 8:39 AM, Mohammad Amir : Are you checking RTV as it is now OOS and also E0CNVC52_09_012 is OOS and now this is blocking reels delivery. Thank you very much! April 14, 2025 at 8:41 AM, Kertész Dániel : Now I'm all time at the RTV, because its problems. April 14, 2025 at 8:42 AM, Mohammad Amir : Okay thank you very much! April 14, 2025 at 8:43 AM, 방혁 PM(Bang.Hyuk) FA : 바로 확인할게요 April 14, 2025 at 8:44 AM, Mohammad Amir : @FA Please check E0STKC51_C02 there is Travel Driver error. Thank you! April 14, 2025 at 8:47 AM, 김수민 : 양극 RTV 쪽에는 여전히 출고가 안 되고 있습니다. April 14, 2025 at 8:50 AM, Mohammad Amir : This message was deleted. April 14, 2025 at 8:50 AM, QuangPhan : Hello! Good morining! @FA Please check NC AN robot #2 stopped. Thanks April 14, 2025 at 8:51 AM, 방혁 PM(Bang.Hyuk) FA : 무언정지 상태로 확인되는데 긴급점검하겠습니다 April 14, 2025 at 8:53 AM, Mohammad Amir : Sir, RTV has started to move two empty trays LTC0792 and LTC0838 have been shioped but there is frequent downtime in RTV that's why you are witnessing reels cathode delivery delay now. Thank you! April 14, 2025 at 8:54 AM, Mohammad Amir : Cathode reels delivery has been normalized now ✅. Cathode reels on the way. Thank you! April 14, 2025 at 8:54 AM, Mohammad Amir : @T. Gàbornè C SL NC for your information. April 14, 2025 at 8:56 AM, 방혁 PM(Bang.Hyuk) FA : 조치되었습니다 릴 공급됩니다 April 14, 2025 at 8:56 AM, 방혁 PM(Bang.Hyuk) FA : @김수민 April 14, 2025 at 8:56 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKC51_C01 there Is crane distance error . It will stop cathode reels delivery. Thank you! April 14, 2025 at 9:00 AM, Mohammad Amir : Dear Sir @방혁 PM(Bang.Hyuk) FA Could you please check this issue , Now reels delivery has normalized but if this issue persist it will stop cathode reels delivery again. Thank you very much! April 14, 2025 at 9:01 AM, QuangPhan : Hello! @MCS Could you please make priority GF NC AN side Line 5&6 please . We will run out of material soon . Thank you. April 14, 2025 at 9:02 AM, Mohammad Amir : Alright working on it. April 14, 2025 at 9:03 AM, Kertész Dániel : We have a lot issues today, and we have only 3 technicians for the whole GF assembly, please be more patient, we're trying to do our best. April 14, 2025 at 9:04 AM, Kertész Dániel : Thank you! April 14, 2025 at 9:04 AM, Mohammad Amir : Unfortunately,As I checked there is no reels available for NC AN . Thank you very much! April 14, 2025 at 9:04 AM, Mohammad Amir : Thank you very much 🙏,I appreciate it. April 14, 2025 at 9:08 AM, 김수민 : 피엠님 양극 RTV PIO BUSY ON TIME OVER ERROR 발생했습니다. 현장 확인 부탁드립니다 April 14, 2025 at 9:11 AM, Mohammad Amir : @FA Please also check E0STKC52_C01 there is MCP AP Error. Thank you! April 14, 2025 at 9:14 AM, 방혁 PM(Bang.Hyuk) FA : We can't security team block our way April 14, 2025 at 9:17 AM, Hữu Thắng : Good morning Amir . Could u please monitoring in GF NC AN . If there’s have materials . Please make priority . Thank you . April 14, 2025 at 9:18 AM, Mohammad Amir : Sure we are monitoring the process. Unfortunately still there is no reels available for NC AN as soon as materials arrive we will increase materials delivery speed. Thank you very much! April 14, 2025 at 9:19 AM, Hữu Thắng : Thank you sir . April 14, 2025 at 9:19 AM, Mohammad Amir : You are welcome! April 14, 2025 at 9:23 AM, 김수민 : Please check the quantity of available materials in the warehouse. Both ca and an nc April 14, 2025 at 9:23 AM, Shakir (MCS) : Checking April 14, 2025 at 9:25 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching - Cathode: 343 - Anode: 224 VD Pre STK > VD - Cathode: 02 - Anode: 01 VD Post STK > Stacking - Cathode: 28 - Anode: 156 Reels :- Anode -00 Cathode-318 Thank you! April 14, 2025 at 9:54 AM, Karina : @fa Hello, near STK 5line, machine #19, not working AGV station, please you can check? April 14, 2025 at 9:57 AM, 방혁 PM(Bang.Hyuk) FA : Solvrd April 14, 2025 at 9:57 AM, Mohammad Amir : Thank you very much,Sir! April 14, 2025 at 10:03 AM, Mohammad Amir : @FA @Kertész Dániel Please could you check E0CNVC52_09_002 there is PIO Busy on time over error and RTV is OOS and it is blocking cathode reels delivery. Thank you very much April 14, 2025 at 10:03 AM, Kertész Dániel : Done April 14, 2025 at 10:04 AM, Mohammad Amir : Thank you very much! April 14, 2025 at 10:09 AM, 김수민 : Plz recheck April 14, 2025 at 10:09 AM, Mohammad Amir : Checking Sir! April 14, 2025 at 10:11 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching - Cathode: 346 - Anode: 229 VD Pre STK > VD - Cathode: 03 - Anode: 03 VD Post STK > Stacking - Cathode: 38 - Anode: 158 Reels :- Anode -00 Cathode-332 Thank you! April 14, 2025 at 10:40 AM, 김수민 : @Mohammad Amir Please order these tray LTA 0412 0173 0978 1511 1388 1489 1176 as E0STKA51_M04~10. April 14, 2025 at 10:41 AM, Shakir (MCS) : Working on it April 14, 2025 at 10:56 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0CNVC52_09_11 run time error and RTV is OOS it is blocking cathode reels delivery. Thank you very much! April 14, 2025 at 11:00 AM, Shakir (MCS) : All the carrier has been transfer to M04~10. Except LTA0412. ✅ Please check the id LTA0412 this carrier is not available MCS/RTD carrier list. Thank you April 14, 2025 at 11:07 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 EOSTKC51 RTV MCP 적색불 들어와있고 RTV 멈춰있습니다. 확인부탁드립니다 April 14, 2025 at 11:12 AM, Kertész Dániel : Korean technicians are working on it. April 14, 2025 at 11:13 AM, Mohammad Amir : Okay, Thank you very much! April 14, 2025 at 11:24 AM, 김수민 : Please order these tray LTA 0081 0951 0266 1410 0521 1369 0686 1296 0789 as E0STKA51_M04~10. April 14, 2025 at 11:24 AM, Shakir (MCS) : Working on it ✅ April 14, 2025 at 11:50 AM, Shakir (MCS) : All the carrier has been transfer to M04~10. Except LTA0686. ✅ Please check the id LTA0686 this carrier is not available MCS/RTD carrier list. Thank you April 14, 2025 at 12:04 PM, Shakir (MCS) : @FA Please check the E0CNVC52_RTV01 is OOS causing delay in reel supply. Thank you April 14, 2025 at 1:01 PM, Mohammad Amir : @FA @Kertész Dániel Please check out E0STKC51_C02 there is Fork #1 Load position error when active and it is causing reels delivery delay. Thank you! April 14, 2025 at 1:02 PM, Kertész Dániel : @Csuti Zoltán F.A légyszi lessétek meg, köszönöm April 14, 2025 at 1:07 PM, Shakir (MCS) : @FA Please check C1STKC71 Load oversize error! Thank you April 14, 2025 at 1:09 PM, 김수민 : @Mohammad Amir Please order these tray LTA 1803 0326 0624 as E0STKA51_M04~10. April 14, 2025 at 1:09 PM, Shakir (MCS) : Working on it April 14, 2025 at 1:10 PM, Csuti Zoltán F.A : Rendben April 14, 2025 at 1:14 PM, Shakir (MCS) : All the carrier has been transfer to M04~10. Except LTA0624. ✅ Please check the id LTA0624 this carrier is not available MCS/RTD carrier list. Thank you April 14, 2025 at 1:26 PM, Shakir (MCS) : @FA Please check C1STKA71_P15/16 is OOS because of light curtain error. Thank you! April 14, 2025 at 1:42 PM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 345 - Anode: 239 VD Pre STK > VD - Cathode: 00 - Anode: 03 VD Post STK > Stacking - Cathode: 38 - Anode: 148 Reels :- Anode -00 Cathode-289 Thank you! April 14, 2025 at 3:41 PM, Karina : @fa AGV5 stopped near 5 Line/STK #19, please check. Thank you! April 14, 2025 at 4:02 PM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 336 - Anode: 241 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 47 - Anode: 163 Reels :- Anode -00 Cathode-272 Thank you! April 14, 2025 at 5:16 PM, Shakir (MCS) : @FA Please check E0CNVA51_06_154/152 INV01-run time over error Thank you April 14, 2025 at 5:35 PM, T. Gàbornè C SL NC : @Fa Please check CA NC AGV #4. Thx April 14, 2025 at 5:57 PM, Elena SL : Hello. Please check AGV #6 near 6 line ST. THANK YOU April 14, 2025 at 6:04 PM, Ynja/ivancsa FA : solved April 14, 2025 at 6:04 PM, 카스텔 발라지 F.A. : Jó estét! FA "D" műszak:12/13 +2 Overtime (2): Takács Ádám, Denkó János Sick (1):Hufnágel Dániel, Holiday (0) Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(6+2): Zsurbej Zsolt, Novák Károly, Kasztel Balázs, Nagy Zsolt, Novák Zoltán, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 14, 2025 at 6:09 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please LR again for VD An 5-1 half chamber. Thank you. April 14, 2025 at 6:10 PM, Ynja/ivancsa FA : Please check LR April 14, 2025 at 6:11 PM, Shahbaz 샤바즈 MCS/RTD : Received. Thanks April 14, 2025 at 7:35 PM, Simon Dávid D SL NC : @FA hello NC CA 5/2 gépnél megált a magazin szállítás ,megnéznétek köszönöm April 14, 2025 at 8:36 PM, Ynja/ivancsa FA : @MCS VD AN 5-1, 6-8 half chamber — please check if it has been there for a long time. I already created the LR April 14, 2025 at 8:39 PM, Cao thi my linh : This message was deleted. April 14, 2025 at 8:40 PM, Cao thi my linh : @MCS hi, there is no film roll in line 5 and 6, what is the reason? thanks April 14, 2025 at 8:42 PM, Shahbaz 샤바즈 MCS/RTD : LR is up and waiting for plates. April 14, 2025 at 8:43 PM, Shahbaz 샤바즈 MCS/RTD : Sorry roll for 5/6 line? April 14, 2025 at 8:44 PM, Ynja/ivancsa FA : Thank you April 14, 2025 at 8:48 PM, 인제(Hwang) : NC An Robot#2 Error April 14, 2025 at 8:48 PM, Shahbaz 샤바즈 MCS/RTD : Job created for 5-1 and 6-8 April 14, 2025 at 8:49 PM, 카스텔 발라지 F.A. : Working on it April 14, 2025 at 8:51 PM, Cao thi my linh : yes . reed is coming out very slow we are running out of reed to run . we are waiting thanks April 14, 2025 at 8:52 PM, Shahbaz 샤바즈 MCS/RTD : Oh you mean reel. April 14, 2025 at 8:54 PM, Cao thi my linh : yes . that's right April 14, 2025 at 8:54 PM, Shahbaz 샤바즈 MCS/RTD : Anode? April 14, 2025 at 8:54 PM, Cao thi my linh : yes line 5 and line 6 anode April 14, 2025 at 8:54 PM, 카스텔 발라지 F.A. : @Shahbaz 샤바즈 MCS/RTD Hello! We took out MLA2233, from the C0PVA020_05_033 The handle are damaged April 14, 2025 at 8:56 PM, Shahbaz 샤바즈 MCS/RTD : Currently there is no reel available for Anode line 5/6. April 14, 2025 at 9:04 PM, Cao thi my linh : yes thanks we are waiting April 14, 2025 at 9:52 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello NC AN 5 line és 6 line nincs reel,mi az oka? April 14, 2025 at 9:56 PM, Shahbaz 샤바즈 MCS/RTD : Currently RTD filtering shows 0 available lots for 5/6 line. April 15, 2025 at 12:14 AM April 15, 2025 at 12:14 AM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello NC AN megint nincs semmi reel,beszéltem elektródával azt mondják van a raktárban AN reel,megnéznéd köszönöm April 15, 2025 at 12:29 AM, Ynja/ivancsa FA : @mcs Please check MLA5250 destination on C1CNV072_P34 April 15, 2025 at 12:32 AM, Shahbaz 샤바즈 MCS/RTD : MLA5250 is at C2CNV072_16_295 and destination is P12. April 15, 2025 at 12:35 AM, Ynja/ivancsa FA : Thank you April 15, 2025 at 12:41 AM, Shahbaz 샤바즈 MCS/RTD : There is no transferable material stored in the warehouses so the material coming from slitter being transferred to notching. April 15, 2025 at 2:57 AM, Yulya Kirsanova : Hello. Agv#5 stopped with error near Staсking Line 5/12 Please check @fa Thank you so much. April 15, 2025 at 3:13 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51_C02 “Travel Driver error.” Thank you! April 15, 2025 at 3:13 AM, 카스텔 발라지 F.A. : Working on it April 15, 2025 at 5:42 AM, Ivan Kasian Sl 5L 🥹 : Good morning everyone Please check the anode feed on the line 5-6 @Shahbaz 샤바즈 MCS/RTD April 15, 2025 at 5:42 AM, Ivan Kasian Sl 5L 🥹 : Stacking April 15, 2025 at 5:45 AM, Ivan Kasian Sl 5L 🥹 : P12 have plate , but i see empty stations agv stack April 15, 2025 at 5:45 AM, Shahbaz 샤바즈 MCS/RTD : Good morning, Checking April 15, 2025 at 5:45 AM, Ivan Kasian Sl 5L 🥹 : Thank you April 15, 2025 at 5:48 AM, Ivan Kasian Sl 5L 🥹 : And please restart agv5 near line 5.16 stacking April 15, 2025 at 5:48 AM, Ivan Kasian Sl 5L 🥹 : @fa April 15, 2025 at 5:49 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the plate ID at P12. Thanks April 15, 2025 at 5:49 AM, Ivan Kasian Sl 5L 🥹 : Moment April 15, 2025 at 5:49 AM, Ivan Kasian Sl 5L 🥹 : Mla 4403 April 15, 2025 at 5:50 AM, Ivan Kasian Sl 5L 🥹 : 4203 sorry April 15, 2025 at 5:51 AM, Ivan Kasian Sl 5L 🥹 : P08 mla2051 April 15, 2025 at 5:53 AM, Shahbaz 샤바즈 MCS/RTD : In CIM it is showing MLA5250 at P12, in actual MLA5250 is on 1F. April 15, 2025 at 5:55 AM, Ivan Kasian Sl 5L 🥹 : Can you change the data to what I see? April 15, 2025 at 5:56 AM, Ivan Kasian Sl 5L 🥹 : MLA4203 April 15, 2025 at 5:57 AM, Shahbaz 샤바즈 MCS/RTD : I updated in MCS April 15, 2025 at 5:59 AM, Ivan Kasian Sl 5L 🥹 : Agv8 Without a task, you can create one for him job for p08 MLA2051 April 15, 2025 at 6:00 AM, Shahbaz 샤바즈 MCS/RTD : AGV#09 is on the way April 15, 2025 at 6:01 AM, Ivan Kasian Sl 5L 🥹 : @FA check please, he blocks the way for other agv April 15, 2025 at 6:07 AM, Shahbaz 샤바즈 MCS/RTD : C1CNV072_P12 This carrier data is not updated in the CIM side it is not showing in the next lot. Please check April 15, 2025 at 6:10 AM, Ivan Kasian Sl 5L 🥹 : Карина, Дима посмотрите пожалуйста April 15, 2025 at 6:11 AM, Ivan Kasian Sl 5L 🥹 : Я в сенсор залез , чтоб убедится в этом April 15, 2025 at 6:11 AM, Ivan Kasian Sl 5L 🥹 : @Karina @Dima Kusyk April 15, 2025 at 6:14 AM, 김수민 : Plz recheck April 15, 2025 at 6:16 AM, Karina : @fa Please, check AGV#5, 5 line/STK, machine #16 April 15, 2025 at 6:17 AM, Karina : it has been stopped for about 20 minutes, this blocks the movement of other AGVs April 15, 2025 at 6:18 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 327 - Anode: 283 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 55 - Anode: 122 Reels :- Anode -00 Cathode-229 Thank you! April 15, 2025 at 6:27 AM, Simon Attila F. A. : @Shakir (MCS) Good morning! Am I right in thinking that there is no material available for press and slitter machines? Please check. Thank you. April 15, 2025 at 6:33 AM, Shakir (MCS) : Yes, No lot available April 15, 2025 at 6:33 AM, Simon Attila F. A. : Thank you! April 15, 2025 at 6:38 AM, Shakir (MCS) : @FA @CIM @Nagy Tamás FA C1CNV072_P12 carrier id MLA4203 This carrier data is not updated in the CIM side it is not showing in the next lot. Please check April 15, 2025 at 6:59 AM, Karina : @mcs Good morning We have a slow supply of anode, can you check? (5 line, STK) April 15, 2025 at 7:01 AM, Shakir (MCS) : Yes, because of C1CNV072_P12 carrier id MLA4203 This carrier data is not updated in the CIM side. @FA @CIM Please check on priority Supply of AN material delay. Thank you April 15, 2025 at 7:03 AM, Shakir (MCS) : Inside CIM it showed MLA5250 carrier at P12 Thank you April 15, 2025 at 7:09 AM, Kertész Dániel : On the P12 (out) the carrier ID is MLA4203 April 15, 2025 at 7:11 AM, Shakir (MCS) : Yes it is already updated in MCS but inside CIM it showing different id MLA5250 at P12 April 15, 2025 at 7:12 AM, Kertész Dániel : Could you modify it to MLA4203? April 15, 2025 at 7:13 AM, Shakir (MCS) : Yes, night shift colleague already updated April 15, 2025 at 7:14 AM, Shakir (MCS) : Here April 15, 2025 at 7:20 AM, Shakir (MCS) : Now the carrier from P12 started to deliver the AN material. Job from P12 initiated to ST machine Thank you April 15, 2025 at 7:42 AM, 조범희 : 6L ST 음극 전극 공급이 늦어지고있습니다 확인부탁드립니다 @방혁 PM(Bang.Hyuk) FA April 15, 2025 at 7:46 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 문제 확인 부탁드립니다. April 15, 2025 at 7:49 AM, Kertész Dániel : @Shakir (MCS) please check why the anode magazines are in late at the stacking line 6 April 15, 2025 at 7:50 AM, Shakir (MCS) : 4 job exists for line 6 AGV03 and AGV06 and AGV01 assigned on the wa Thank you April 15, 2025 at 7:50 AM, Kertész Dániel : Thank you so much! April 15, 2025 at 7:56 AM, Shakir (MCS) : There is some CIM data issue in the early morning for some time CIM AN P12 data stuck thật why AN supply delay. The issue has been resolved already and supply and job order now normalize. ✅ Thank you April 15, 2025 at 7:59 AM, KIM SEYEON [김세연]_FA : what is the CIM data issue and who did you get this information? April 15, 2025 at 7:59 AM, Shakir (MCS) : Two AN carrier on the way and Two AN carrier at P12 CNV. April 15, 2025 at 8:02 AM, Shakir (MCS) : Here sir , inside CIM at P12 data showed MLA5250. But physically the carrier exists MLA4203. Thank you April 15, 2025 at 8:20 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 15, 2025 at 8:24 AM, 김수민 : Plz recheck April 15, 2025 at 8:24 AM, Shakir (MCS) : Checking April 15, 2025 at 8:32 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 329 - Anode: 297 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 50 - Anode: 102 Reels :- Anode -00 Cathode-244 Thank you! April 15, 2025 at 8:45 AM, Simon Attila F. A. : @Shakir (MCS) Can you help me? I search a roll, RBC3224. Where is it now? I not see this... The ACS show on ca coating port2, but this port is empty. Yesterday last material is this, transport is starting to the warehouse, but his number stay on thats port, then now show this port busy. Please check this material. April 15, 2025 at 8:45 AM, Shakir (MCS) : Checking April 15, 2025 at 8:56 AM, Shakir (MCS) : According to MSC/RTD current location is P02 however yesterday there is UR, agv04 assigned and Job was terminated at 16:28 by OP. Thank you April 15, 2025 at 8:58 AM, Simon Attila F. A. : Yes, I deleted this job, 'cause the agv get in the warehouse, and comming back, and try again transporting this material from this port... April 15, 2025 at 8:58 AM, Simon Attila F. A. : I think it is in the warehouse with NG sign... April 15, 2025 at 8:59 AM, Simon Attila F. A. : A try search... April 15, 2025 at 8:59 AM, Simon Attila F. A. : Thank you for help. April 15, 2025 at 10:24 AM, P.Bence A SSL : @Shakir (MCS) please write VD-ST warehouse full plate quantity thank you April 15, 2025 at 10:24 AM, Shakir (MCS) : Checking April 15, 2025 at 10:28 AM, Shakir (MCS) : VD-ST AN: 104 CA: 67 April 15, 2025 at 10:35 AM, P.Bence A SSL : Check again please April 15, 2025 at 10:37 AM, Shakir (MCS) : This message was deleted. April 15, 2025 at 10:40 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 329 - Anode: 310 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 66 - Anode: 102 Reels :- Anode -00 Cathode-275 Thank you! April 15, 2025 at 10:41 AM, Shakir (MCS) : @Fa Please check E0STKA51_C02, port interface error. Thank you April 15, 2025 at 11:06 AM, 안진모 An Jin Mo invited 오세민(ST). April 15, 2025 at 11:38 AM, Shakir (MCS) : This message was deleted. April 15, 2025 at 11:39 AM, Shakir (MCS) : @ACS @FA FYI: MCS showing VD CA, AGV route C0VAVC01: Not auto, TscState: paused. Thank you April 15, 2025 at 11:44 AM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 334 - Anode: 317 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 53 - Anode: 107 Reels :- Anode -00 Cathode-284 Thank you! April 15, 2025 at 11:58 AM, Shakir (MCS) : @FA Please check E0STKC51_C02 Travel Driver Error. Thank you April 15, 2025 at 11:59 AM, Simon Attila F. A. : Working. Thx! April 15, 2025 at 12:01 PM, T. Gàbornè C SL NC : @Fa Hello VD CA 6_07 finised, QC OK, AGV no move mgz. Please help. Thanks. April 15, 2025 at 12:05 PM, Shakir (MCS) : @ACS Job is alternated because MCS showing VD CA, AGV route C0VAVC01: Not auto, TscState: paused. Thank you April 15, 2025 at 12:08 PM, Kertész Dániel : We don't have any permission to change these things. And we don't know who changed the state of the routes. April 15, 2025 at 12:09 PM, Sazzad Bhai SKon : @양원석 hello pm, could you please check the ACS state? It is currently not auto mode. Thank you April 15, 2025 at 12:13 PM, Kertész Dániel : @Sazzad Bhai SKon Do you have permission to change the TSC state in the MCS from "Paused" to "Auto"? April 15, 2025 at 12:14 PM, Sazzad Bhai SKon : No, so I requested a PM April 15, 2025 at 12:19 PM, 양원석 : @연해리 pm님 gf vd acs 상태 확인부탁드립니다. April 15, 2025 at 12:45 PM, T. Gàbornè C SL NC : The VD machines no start, waiting the mgzs. Please send the info the "Auto" status start. Thx April 15, 2025 at 12:46 PM, Kertész Dániel : Amint kapunk információt, jelezni fogjuk! April 15, 2025 at 1:01 PM, Shakir (MCS) : Now the route is Online and job has been resume to transfer mode April 15, 2025 at 1:03 PM, Koncz Tamás : Now is fixed! April 15, 2025 at 1:12 PM, Koncz Tamás : 11:46 Full section ACS patch complete. Vendor company make this patch. April 15, 2025 at 2:18 PM, Simon Attila F. A. : @Shakir (MCS) please check the E0STKA31_m1 port. Not possible delete the data from here. This port empty. Txs. April 15, 2025 at 2:18 PM, Shakir (MCS) : Checking April 15, 2025 at 2:21 PM, Shakir (MCS) : Also in MCS the port is empty but there is Job to M01 port from E1CTA010_P02 Thank you April 15, 2025 at 2:22 PM, Simon Attila F. A. : I not see any job... April 15, 2025 at 2:22 PM, Shakir (MCS) : This job ia alternated because the source is OOS. April 15, 2025 at 2:23 PM, Simon Attila F. A. : Do you see, what is a source? April 15, 2025 at 2:24 PM, Shakir (MCS) : E1CTA010_P02 April 15, 2025 at 2:24 PM, Shakir (MCS) : Carrier RBA1014 April 15, 2025 at 2:25 PM, Simon Attila F. A. : CTA010 not is use... April 15, 2025 at 2:26 PM, P.Bence A SSL : Check again please April 15, 2025 at 2:27 PM, Simon Attila F. A. : This message was deleted. April 15, 2025 at 2:28 PM, Shakir (MCS) : Should I delete the job ? @Simon Attila F. A. April 15, 2025 at 2:28 PM, Simon Attila F. A. : Yes, please. April 15, 2025 at 2:29 PM, Shakir (MCS) : The job has been cancelled successfully ✅ Thank you April 15, 2025 at 2:30 PM, Simon Attila F. A. : Thank you. April 15, 2025 at 2:31 PM, Shakir (MCS) : VD-ST AN : 102 CA : 66 April 15, 2025 at 2:31 PM, Simon Attila F. A. : Sorry, but this not solved my problem. April 15, 2025 at 2:32 PM, Shakir (MCS) : What is the problem? April 15, 2025 at 2:32 PM, Simon Attila F. A. : This port showing busy. April 15, 2025 at 2:32 PM, Simon Attila F. A. : But this is empty port. April 15, 2025 at 2:33 PM, Simon Attila F. A. : so it keeps coming back to data tray missing error. April 15, 2025 at 2:34 PM, Simon Attila F. A. : Now Data Off Sensor on Overtime error. April 15, 2025 at 2:35 PM, Shakir (MCS) : In MCS there is No error showing or nothing at M01. April 15, 2025 at 2:35 PM, Simon Attila F. A. : Please wait 2 min, and be error again... April 15, 2025 at 2:37 PM, Simon Attila F. A. : So if this port is busy, the material cannot leave the warehouse here. April 15, 2025 at 2:37 PM, Shakir (MCS) : I see there is carrier showing in SCS but MCS is clear April 15, 2025 at 2:38 PM, Simon Attila F. A. : Yes, this is a problem, I think... April 15, 2025 at 2:38 PM, Simon Attila F. A. : Can you delete scs data from there? April 15, 2025 at 2:39 PM, Shakir (MCS) : Yes, This is the problem you facing again and again error. There carrier data stuck in SCS PORT. April 15, 2025 at 2:39 PM, Shakir (MCS) : No access April 15, 2025 at 2:39 PM, Simon Attila F. A. : Oh... April 15, 2025 at 2:40 PM, Simon Attila F. A. : I don't know what else I can do... April 15, 2025 at 2:41 PM, Simon Attila F. A. : Now be a new job, but the crane is stay stopped. April 15, 2025 at 2:41 PM, Shakir (MCS) : Now there is Manual job created. April 15, 2025 at 2:42 PM, Shakir (MCS) : Yea April 15, 2025 at 2:45 PM, Simon Attila F. A. : The error is stay... April 15, 2025 at 2:49 PM, Shakir (MCS) : There is no error at M01, only there is manual job created as carrier name VOLKSWAGENCUT, from shelf 0102803 this status of shelf is Retrieve Reserved. April 15, 2025 at 2:50 PM, Shakir (MCS) : May be there is port issue, error occurred again. April 15, 2025 at 3:03 PM, Shakir (MCS) : There is carrier data stuck at M01 that why you face error, also current job showing that there is carrier at M01. April 15, 2025 at 3:05 PM, Kertész Dániel : Yes, this is our problem. Please delete the stuck data from that manual port. April 15, 2025 at 3:10 PM, Simon Attila F. A. : So, we try another thing, we need a few minutes... April 15, 2025 at 3:26 PM, T. Gàbornè C SL NC : Sziasztok CA Robot #3 megállt. MCS data report incorrect error-al. Gyertek légyszíves. Köszönöm April 15, 2025 at 3:28 PM, 김수민 : Plz recheck April 15, 2025 at 3:28 PM, Shakir (MCS) : Checking April 15, 2025 at 3:32 PM, Shakir (MCS) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 315 - Anode: 322 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 70 - Anode: 101 Reels :- Anode -161 Cathode-315 Thank you! April 15, 2025 at 3:33 PM, T. Gàbornè C SL NC : @Fa Hello VD CA _01 finised, QC OK, AGV no move mgz. Please help. Thanks. April 15, 2025 at 3:34 PM, Simon Attila F. A. : We tried everything, but we were unsuccessful. There is data left on this port that we cannot remove, and therefore the release of the material to this port is not possible until then. April 15, 2025 at 3:35 PM, Shakir (MCS) : Now, Anode reel available in lot, operation has been resume now. Job has been successfully initiated to manual ports. ✅ Thank you April 15, 2025 at 3:37 PM, Shakir (MCS) : This message was deleted. April 15, 2025 at 3:37 PM, Shakir (MCS) : Chamber name? April 15, 2025 at 3:38 PM, T. Gàbornè C SL NC : Sorry, 5_01 April 15, 2025 at 3:40 PM, Shakir (MCS) : The VD 5-1 is OOS and there is no UR received that’s why agv not come to pick up mgz. Thank you April 15, 2025 at 3:46 PM, T. Gàbornè C SL NC : Okey, solved Thank you very much April 15, 2025 at 3:49 PM, Shakir (MCS) : Yes, UR received and now agv03 and agv05 assigned. Thank you April 15, 2025 at 4:34 PM, Kertész Dániel : @Shakir (MCS) Can you check why the E0CNVA52 RTV doesn't bring the reels to the ports please? April 15, 2025 at 4:35 PM, Shakir (MCS) : Checking April 15, 2025 at 4:41 PM, Shakir (MCS) : @CCS Please RTV A52 AN is not moving. MCS side ✅ Thank you April 15, 2025 at 4:48 PM, 방혁 PM(Bang.Hyuk) FA : @Simon Attila F. A. Can you check GF AN NC RTV? April 15, 2025 at 4:51 PM, 방혁 PM(Bang.Hyuk) FA : wirh CA RTV April 15, 2025 at 4:51 PM, Simon Attila F. A. : Sorry, I'm on the electrode place. April 15, 2025 at 4:52 PM, 방혁 PM(Bang.Hyuk) FA : Who is working now in Assy April 15, 2025 at 4:52 PM, Simon Attila F. A. : @Kertész Dániel ? April 15, 2025 at 4:52 PM, T. Gàbornè C SL NC : @Fa Hello Please check GF CA VD C1STKC71-STK-MCP#2 Load oversize error left Thx April 15, 2025 at 4:55 PM, Farkas Tamàs : . April 15, 2025 at 4:59 PM, 방혁 PM(Bang.Hyuk) FA : E0CNVA52 is in manual April 15, 2025 at 5:00 PM, Kertész Dániel : I will check it. Korean technicians left it in error, because they worked on the lifts, meanwhile the RTV wanted to take out a Reel. April 15, 2025 at 5:00 PM, Kertész Dániel : We switched it into manual mode, because it wasn't moving at all April 15, 2025 at 5:02 PM, 방혁 PM(Bang.Hyuk) FA : If this port in manual,Vehicle will be not move April 15, 2025 at 5:03 PM, Kertész Dániel : I know April 15, 2025 at 5:03 PM, 방혁 PM(Bang.Hyuk) FA : Who make a MNL ORDER for LTA0829? April 15, 2025 at 5:08 PM, Shakir (MCS) : Transfer job terminated by OP at 16:14 and created again by OP to same destination E0CNVA52_M02 Thank you April 15, 2025 at 5:36 PM, 방혁 PM(Bang.Hyuk) FA : Solved April 15, 2025 at 5:36 PM, Shakir (MCS) : Now the RTV AN operational ✅ Reel supply has been normalized Thank you April 15, 2025 at 5:38 PM, 방혁 PM(Bang.Hyuk) FA : @김수민 릴 정상 공급됩니다! April 15, 2025 at 5:39 PM, Shakir (MCS) : @FA At E0CNVA52_07_47/48 data mismatch error, same error occurred at same location, At 17:11, 17:29 and 17:35. Causing reel supply delay. Please check Thank you April 15, 2025 at 6:03 PM, 인제(Hwang) : NC An RTV Error April 15, 2025 at 6:07 PM, Zaya/ivancsa FA : solved April 15, 2025 at 6:18 PM, VK (mcs) : @FA Please check Cathode reel STK C51 LTC0507 is not being transferred. Location is mismatch Current location is M06-OP01 (8109) April 15, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "D" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Szabadi Miklós Oláh András ———————————— Assembly(6+1): Zsurbej Zsolt Novák Károly Novák Zoltán Kovács Szabolcs Kasztel Balázs Nagy Zsolt ———————————— Formation/Modul(3): Magyar Balázs Nagy Gábor Martina Dávid ———————————— April 15, 2025 at 6:36 PM, VK (mcs) : @FA Please check Cathode reel STK C52 There is no error but cranes are frozen! April 15, 2025 at 6:39 PM, 카스텔 발라지 F.A. : Solved, the warehouse was frozen April 15, 2025 at 6:46 PM, 카스텔 발라지 F.A. : @VK (mcs) Hello! Please check C0PVC020_P04 it's empty but in MCS the MLC0133 is on the port. And also check please P12 , in MCS the port is empty. But it has magazines on it. LOT1: MC4334 LOT2: MC1293 LOT3: MC4200 LOT4: MC3227 LOT5: MC4448 LOT6: MC5269 April 15, 2025 at 6:46 PM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC52 -M03 LTC0423 is not being transferred. April 15, 2025 at 6:48 PM, 카스텔 발라지 F.A. : Working on it April 15, 2025 at 6:55 PM, VK (mcs) : As I see, C0PVC020. -P12 in CCS carrier ID is empty April 15, 2025 at 6:59 PM, VK (mcs) : Now, ID is fine, thx April 15, 2025 at 6:59 PM, 카스텔 발라지 F.A. : Solved 👍 AGV is on the Way. April 15, 2025 at 6:59 PM, 카스텔 발라지 F.A. : Thank you! Can you please remove the MLC0132 from the C0PVC020_P04? April 15, 2025 at 7:00 PM, Zaya/ivancsa FA : C1STKA72 error, ready off during forking Pls check April 15, 2025 at 7:00 PM, 카스텔 발라지 F.A. : I'm on my way 👍 April 15, 2025 at 7:01 PM, VK (mcs) : Thank you. MLC0132 It’s a bug but when a next carrier move to that port then, it will disappear automatically April 15, 2025 at 7:04 PM, 카스텔 발라지 F.A. : Okay Thank you very much! April 15, 2025 at 7:26 PM, VK (mcs) : @카스텔 발라지 F.A. Can you please check this one. Thx April 15, 2025 at 7:30 PM, 카스텔 발라지 F.A. : The current location is M06 (8110) April 15, 2025 at 7:32 PM, VK (mcs) : Yes after requested, someone changed the location but it didn't move. Please cancel it in SCS and create a manual job. April 15, 2025 at 7:37 PM, 카스텔 발라지 F.A. : Done ✅ April 15, 2025 at 7:39 PM, VK (mcs) : Thank you April 15, 2025 at 10:52 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16-100) Carrier is not moving. April 15, 2025 at 10:56 PM, Zaya/ivancsa FA : done April 15, 2025 at 11:37 PM, Yulya Kirsanova : Hello. Agv#4 stopped with error near Staсking Line 6/20 Please check @fa Thank you so much. April 15, 2025 at 11:51 PM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 22(13003) Data mismatch error! April 16, 2025 at 2:45 AM April 16, 2025 at 2:45 AM, Simon Dávid D SL NC : @FA hello NC CA #2AGV megált ,megnéznétek köszönöm April 16, 2025 at 4:46 AM, Yulya Kirsanova : Hello. Agv#10 stopped with error near Staсking Line 6/3 Please check @fa Thank you so much. April 16, 2025 at 5:30 AM, VK (mcs) : @FA Please check Cathode reel STK c51 Load position error! April 16, 2025 at 5:57 AM, Mohammad Amir : @FA Please check E0CNVA52_07046/012 it is OOS and it is blocking Anode reels delivery. Thank you very much! April 16, 2025 at 5:58 AM, Mohammad Amir : @FA Please check this error occured again at E0STKC51_C02. Thank you very much! April 16, 2025 at 6:07 AM, Mohammad Amir : @FA Please check C1STKA71_C01/C02 there is ready off during Forking and port interface Error. Thank you! April 16, 2025 at 6:10 AM, Mohammad Amir : @FA Please check this issue on priority,Anode reels delivery has stopped because of this issue. Thank you very much! April 16, 2025 at 6:11 AM, Csanálosi Gábor FA : Omw April 16, 2025 at 6:12 AM, Mohammad Amir : @FA Please also check C1CNV072_16_156 there is Inv-01 run time over error and it is blocking stacking materials delivery, please also fix this issue on priority as there is lack of Anode materials. Thank you! April 16, 2025 at 6:12 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 6:12 AM, Lan Nhi : Good morning @FA For CA E0STKC51 is OOS not provide reel for a long time. Please check for me Thanks April 16, 2025 at 6:17 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(2): Boromisza Zoltán, Pintye Miklós Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Rácz Dániel --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 16, 2025 at 6:18 AM, Csanálosi Gábor FA : Done April 16, 2025 at 6:18 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 6:19 AM, Mohammad Amir : This message was deleted. April 16, 2025 at 6:37 AM, Mohammad Amir : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01. Thank you very much! April 16, 2025 at 6:43 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1CNV072_16_058 it is OOS and it is blocking stacking materials delivery. Thank you! April 16, 2025 at 6:55 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKA71_P21 there is INV-01 Run time Over Error. Thank you! April 16, 2025 at 7:01 AM, Debreczeni Ármin : Hello @Mohammad Amir please share lot quantity. April 16, 2025 at 7:01 AM, Mohammad Amir : Hello, Checking! April 16, 2025 at 7:02 AM, Csanálosi Gábor FA : Done April 16, 2025 at 7:04 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 7:05 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching - Cathode: 275 - Anode: 325 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 91 - Anode: 54 Thank you! April 16, 2025 at 7:08 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1CNV072_P16 and P15 it OOs and it is blocking stacking materials delivery. Thank you! April 16, 2025 at 7:08 AM, Csanálosi Gábor FA : On it April 16, 2025 at 7:08 AM, Mohammad Amir : Thank you! April 16, 2025 at 7:14 AM, Mohammad Amir : @Kovács Ágnes Please check C1STKC71_C02 Load position error. Thank you! April 16, 2025 at 7:27 AM, Mohammad Amir : @Csanálosi Gábor FA Please check E0CNVA52_RTV01 there is lift unload seat port auto off Alaram and because of this reels delivery has stopped. Thank you! April 16, 2025 at 7:30 AM, Csanálosi Gábor FA : Done April 16, 2025 at 7:30 AM, Csanálosi Gábor FA : Done April 16, 2025 at 7:31 AM, Csanálosi Gábor FA : Coming April 16, 2025 at 7:31 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 7:49 AM, Csanálosi Gábor FA : Done April 16, 2025 at 7:50 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 16 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 16, 2025 at 7:51 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 8:12 AM, Sazzad Bhai SKon : @FA @Csanálosi Gábor FA Please check the UNKDUP plate UNK-DUP_MLC4008_20250407224454 (C1STKC71, 0200407) April 16, 2025 at 8:16 AM, Csanálosi Gábor FA : Can you send it to manual port, and @manufacturing could take out and in again? (Im on break atm) April 16, 2025 at 8:16 AM, KIM SEYEON [김세연]_FA : @심재훈 @김대웅 Kim Daewung @정다은 피엠님 죄송합니다만 GF NC RTV LIFT 문제가 있어서 비가동 작업이 필요합니다. 하기 시간과 같이 양,음 순차 작업이 바로 필요한데 해당 시간만 릴창고 포트로 릴 출고 가능할까요? - 4/16 양극 2시간 (9~11시) , - 4/16 음극 2시간 (11시~13시) 긴급 요청 드려 죄송합니다. April 16, 2025 at 8:17 AM, Sazzad Bhai SKon : This message was deleted. April 16, 2025 at 8:18 AM, Sazzad Bhai SKon : Okay sending to C1STKC71_M02 April 16, 2025 at 8:26 AM, Baek Hojong(백호종)FA : This message was deleted. April 16, 2025 at 8:37 AM, Sazzad Bhai SKon : It's on the manual port. Please remove it, check the plate ID and restock. Thank you April 16, 2025 at 8:41 AM, Csanálosi Gábor FA : @manufacturing April 16, 2025 at 8:45 AM, Mohammad Amir : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 280 - Anode: 327 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 100 - Anode: 51 Thank you! April 16, 2025 at 8:59 AM, Mohammad Amir : @FA @Kovács Ágnes Please check C1STKA71_P13/14 are OOS and it is blocking materials delivery to VD AN 5-5 chamber. Thank you very much! April 16, 2025 at 9:13 AM, Csanálosi Gábor FA : Done April 16, 2025 at 9:14 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 9:32 AM, Dmytro Poluekto : @fa Good morning everyone, anode material is not being delivered to line 5/6, please see what the problem is Thank you very much April 16, 2025 at 9:34 AM, Mohammad Amir : Good morning, checking ! April 16, 2025 at 9:36 AM, Mohammad Amir : There is currently issue with C1CNV072 that's why you witnessed delay FA team already working on it. Apart from it everything else is good ,I am monitoring. Could you please remove 1+2 carriers waiting from C1CNV072_M01 it will increase the stacking materials delivery speed. Thank you very much! April 16, 2025 at 9:38 AM, Dmytro Poluekto : Okay, thanks for info April 16, 2025 at 9:38 AM, Csanálosi Gábor FA : C1cnv02 is online again April 16, 2025 at 9:39 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 9:39 AM, Mohammad Amir : We are monitoring. Now issue with C1CNV072 has resolved. April 16, 2025 at 9:50 AM, Mohammad Amir : @Manufacturing Please check and remove 1+2 carriers waiting at C1CNV072_M01 it will increase stacking materials delivery speeds. Thank you very much! April 16, 2025 at 10:05 AM, 문진영 : 혹시 해당 작업해도 될까요 ? 최다한 빠르게 작업 후 정상화 시 공유 드리겠습니다. April 16, 2025 at 10:07 AM, 심재훈 : 잠시만요 April 16, 2025 at 10:08 AM, 이한웅(삼구) : NC An 6-2 아웃포트 매거진 안착불량 확인 부탁드립니다. April 16, 2025 at 10:08 AM, 심재훈 : 2시간안에 꼭 종료 부탁 드립니다. 추가 비가동시 라인 전체 비가동 입니다 April 16, 2025 at 10:11 AM, 배병민 (Bae Byoungmin) : GF 음극 노칭 다관절 로봇#2는 자체 점검으로 30분정도 비가동 진행하겠습니다. 다관절 로봇#1,3는 정상 진행중이라 생산에는 문제가 되지 않겠습니다. 10:15~ GF An Notching Multi-Joint Robot #2 will be out of operation for approximately 30 minutes for self-inspection. Multi-Joint Robots #1 and #3 are operating normally, so there will be no problem in production. April 16, 2025 at 10:25 AM, 문진영 : 감사합니다. RTV포트는 작업 시작 시 비가동 발생하나 릴창고 포트는 출고 갸능하기에 참고 부탁드립니다. April 16, 2025 at 10:38 AM, 배병민 (Bae Byoungmin) : 완료되어 정상 진행되었습니다. Complete April 16, 2025 at 10:48 AM, Tumruu/투머르/IvancsaFA : gf vd anod can I get off at the tenth floor, 72? April 16, 2025 at 10:53 AM, Tumruu/투머르/IvancsaFA : Agv10 April 16, 2025 at 10:53 AM, Csanálosi Gábor FA : No offence, but i think better if you write in korean, and we translate, becouse i dont get what you want. April 16, 2025 at 11:11 AM, Tumruu/투머르/IvancsaFA : Gf vd anod I can't send agv10 to 72. the mistake unknown carrier is not allowed April 16, 2025 at 11:14 AM, 문진영 : 오전 작업 시간이 부족하여 해당 작업을 오후 13:30~14경부터 진행 예정이며 해당 방에 작업 시작 시, 작업 종료 시 별도 공유드리겠습니다. April 16, 2025 at 11:19 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0STKC51_B08 there is. data off sensor on overtime error. Thank you! April 16, 2025 at 11:23 AM, Csanálosi Gábor FA : @Kovács Ágnes April 16, 2025 at 11:25 AM, Mohammad Amir : @FA @Kovács Ágnes Please also check E0STKC51_C02 there is MCP AP Error. Thank you very much! April 16, 2025 at 11:26 AM, Debreczeni Ármin : Line 6 recieve magazines very slow. Storage have any issue? April 16, 2025 at 11:27 AM, Debreczeni Ármin : Ca magazines not arrive to the line April 16, 2025 at 11:28 AM, Sazzad Bhai SKon : Mcs order is normal for stacking line April 16, 2025 at 11:30 AM, Debreczeni Ármin : Can you add a little prio to L6? April 16, 2025 at 11:32 AM, Debreczeni Ármin : Can I get fresh status? April 16, 2025 at 11:32 AM, Sazzad Bhai SKon : Yes we see jobs being created for 5th line. So 6th line getting delayed. We'll monitor the transportation. April 16, 2025 at 11:32 AM, Mohammad Amir : Sure, working on it! April 16, 2025 at 11:34 AM, Mohammad Amir : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 292 - Anode: 333 VD Pre STK > VD - Cathode: 02 - Anode: 03 VD Post STK > Stacking - Cathode: 90 - Anode: 54 Thank you! April 16, 2025 at 11:35 AM, Debreczeni Ármin : Thank you April 16, 2025 at 11:35 AM, Mohammad Amir : You are welcome! April 16, 2025 at 11:36 AM, Kovács Ágnes : Solved April 16, 2025 at 11:36 AM, Sazzad Bhai SKon : AGV VC05 is in alarm: align Sw limit. April 16, 2025 at 11:36 AM, Mohammad Amir : Thank you very much! April 16, 2025 at 11:37 AM, Mohammad Amir : @FA @Kovács Ágnes Please check C1CNV072_16_079/081 it is OOS and it is blocking stacking materials delivery. Thank you very much! April 16, 2025 at 11:37 AM, Mohammad Amir : Please take action on priority as there is less materials on Line-6. Thank you very much! April 16, 2025 at 11:40 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0STKC51_C01 there is MCP Auto/Manual mode error and it is hindering the reels delivery. Thank you very much! April 16, 2025 at 11:46 AM, Mohammad Amir : Please take action on this , stacking materials delivery has been affected. Thank you very much! April 16, 2025 at 11:49 AM, Mohammad Amir : @FA Please also check MLC2198 located at C1CNV071_13_010 it is not moving and blocking recovery CNV . Everything is good from MCS/RTD end ✅. Please check physically. Thank you very much! April 16, 2025 at 11:49 AM, Dmytro Poluekto : @fa ST conveyor stopped, please see what the problem is April 16, 2025 at 11:50 AM, Sazzad Bhai SKon : Run time over error. C1CNV072_16_079 April 16, 2025 at 11:50 AM, Mohammad Amir : For you information ,C1CNV072_079/081 is OOS that's why materials delivery has affected,I already informed FA . Thank you very much! April 16, 2025 at 12:00 PM, Mohammad Amir : Update :- This issue has been solved and materials flow have been normalised ✅. I am monitoring the whole process. Thank you! April 16, 2025 at 12:00 PM, Csanálosi Gábor FA : Done April 16, 2025 at 12:00 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 12:01 PM, Debreczeni Ármin : Agv #9 stucked at L6 April 16, 2025 at 12:03 PM, Mohammad Amir : Could you please check again C1CNV072_16_055/57 there is INV-01 Run Time over error. Thank you very much! April 16, 2025 at 12:12 PM, Csanálosi Gábor FA : Also done April 16, 2025 at 12:13 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 12:13 PM, Mohammad Amir : @Csanálosi Gábor FA could you also check this error. Thank you very much 🙏. April 16, 2025 at 12:14 PM, Csanálosi Gábor FA : Sure omw April 16, 2025 at 12:18 PM, 이한웅(삼구) : Please check NC An #3 AGV April 16, 2025 at 12:19 PM, Mohammad Amir : @Manufacturing @Dmytro Poluekto Please check and remove 1+2 carriers waiting at C1CNV072_M01 it will increase stacking materials delivery speed. Thank you very much! April 16, 2025 at 12:28 PM, Csanálosi Gábor FA : Solved April 16, 2025 at 12:28 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 12:37 PM, Mohammad Amir : Please check MLC3007 located at C1CNV071_13_010 it is not moving and blocking recovery CNV . Please check this Port This is second carrier which stuck here. Thank you very much! April 16, 2025 at 12:46 PM, Sazzad Bhai SKon : @ACS MLA4111 has a job since 12:15 but the transfer is not initiated yet. April 16, 2025 at 12:47 PM, Sazzad Bhai SKon : From C1CNV071_P12 to 6 line stacking April 16, 2025 at 1:01 PM, Csanálosi Gábor FA : @Mohammad Amir technicians working on ca vd maschines, and they need the agv route cleared, so no agv movement alloved there until 14.30. Agv 8 and agv6 already stopped about this. The twi maschines involved: C6VDC090 AND C6VDC080. I left these two agvs in manual, so they can block the route April 16, 2025 at 1:01 PM, Mohammad Amir : Thank you very much for the information! April 16, 2025 at 1:10 PM, Csanálosi Gábor FA : Can you manage the rest of the vd maschines jobs at that line? April 16, 2025 at 1:16 PM, Mohammad Amir : This message was deleted. April 16, 2025 at 1:16 PM, Csanálosi Gábor FA : Yes, cancel them pls until 14.30 April 16, 2025 at 1:18 PM, Mohammad Amir : Alright we are managing so AGV will not move untill 14:30 but after please inform us and we will make it back to normal. Thank you very much! April 16, 2025 at 1:18 PM, Joo : Notching 음극 상공Deck lift belt cut 작업 시작하겠습니다. 13:30 ~ 15: 30 April 16, 2025 at 1:18 PM, Sazzad Bhai SKon : Okay in that case we will make ACS C0VGVC01 as out of service April 16, 2025 at 1:19 PM, Mykhailo : AGV#2 ST L6 near machine 6/18 error could you solve the problem. Thanks. April 16, 2025 at 1:21 PM, Sazzad Bhai SKon : @ACS manager For this reason ACS has been disconnected from MCS until 14:30 Thank you April 16, 2025 at 2:22 PM, Dmytro Poluekto : @fa The material is arriving very slowly on line 5/6, there is practically none at the AGV stations, please solve this problem April 16, 2025 at 2:26 PM, Mohammad Amir : @Csanálosi Gábor FA please inform us when you will be done on VD CA so that we can make ACS connection back to normal. Thank you very much! April 16, 2025 at 2:27 PM, Csanálosi Gábor FA : Its not me, the manufacturing technicians working on there, but sure, as soon as we know they finish, will inform you as well. April 16, 2025 at 2:28 PM, Mohammad Amir : Thank you very much! 🙏 April 16, 2025 at 2:31 PM, Mohammad Amir : There is no abnormalities exists at the moment,AGV,#8 and #5 on the way with materials to line -5/6 . There was issue with C1CNV072 that's why you witnessed delay. Plus AGVs are also busy in carring out UR jobs. We are monitoring the process. Thank you very much! April 16, 2025 at 2:33 PM, Csanálosi Gábor FA : @Kovács Ágnes confirmed , they finished, she switching the two agvs back to auto and you also can connect to acs again. April 16, 2025 at 2:34 PM, Mohammad Amir : @Csanálosi Gábor FA Please check E0CNVA52_07_006 there is Lift belt cut detection error it is blocking Reels delivery. Thank you! April 16, 2025 at 2:34 PM, Mohammad Amir : Thank you very much, working on it! April 16, 2025 at 2:35 PM, Mohammad Amir : Done ✅. Thank you! April 16, 2025 at 2:36 PM, Csanálosi Gábor FA : @Mohammad Amir probably this happening? April 16, 2025 at 2:36 PM, Mohammad Amir : Noted well,Thank you very much! April 16, 2025 at 2:44 PM, Mohammad Amir : @Csanálosi Gábor FA Please check C1CNV071_12_028 it has Data Mismatch error and it is blocking materials recovery. Thank you very much! April 16, 2025 at 3:04 PM, Csanálosi Gábor FA : Not by me, but as i see its done. April 16, 2025 at 3:05 PM, Mohammad Amir : Thank you very much for the information. Yes now material recovery has been normalised ✅. Thank you! April 16, 2025 at 3:36 PM, Mohammad Amir : @Csanálosi Gábor FA Please check C1CNV072_16_144 there is Data Mismatch error and it is blocking stacking materials delivery. Thank you very! April 16, 2025 at 3:37 PM, Csanálosi Gábor FA : Noticed, but someone is already there April 16, 2025 at 3:37 PM, Mohammad Amir : Alright, thank you very much! April 16, 2025 at 3:47 PM, Jun(정우준)_SKOH FA : we opened one more port. it will be better. April 16, 2025 at 3:47 PM, Mohammad Amir : Thank you very much Sir! April 16, 2025 at 3:49 PM, Dmytro Poluekto : Wow, very good) thank you April 16, 2025 at 3:50 PM, Mohammad Amir : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 307 - Anode: 344 VD Pre STK > VD - Cathode: 01 - Anode: 01 VD Post STK > Stacking - Cathode: 86 - Anode: 40 Thank you! April 16, 2025 at 3:51 PM, Debreczeni Ármin : Thanks April 16, 2025 at 3:51 PM, Mohammad Amir : You are welcome! April 16, 2025 at 3:52 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKC72_C02 there is Fork#1 center error when first active , please fix it on priority as there is already lack of Cathode Stacking materials. Thank you very much! April 16, 2025 at 3:56 PM, Joo : 작업 종료하였습니다. 자동모드 전환 완료하였습니다. April 16, 2025 at 3:57 PM, Joo : Notching 양극 상공Deck lift belt cut 작업 시작하겠습니다. 16:00 ~ 18: 00 April 16, 2025 at 3:58 PM, Csanálosi Gábor FA : All done April 16, 2025 at 3:58 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 4:39 PM, Lan Nhi : plz. check for me. agv on machine 5/4(#40), 5/7(#43). VD/An has error with only 2 pallets. thanks April 16, 2025 at 4:40 PM, Mohammad Amir : LR received successfully for both mentioned VD AN machines as soon as materials will be available jobs will be created for remaining half chambers. Thank you! April 16, 2025 at 4:41 PM, Lan Nhi : Thank you April 16, 2025 at 4:41 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKA72_P02 it is OOS that's why Anode stacking materials delivery is getting slow. Thank you! April 16, 2025 at 4:42 PM, Mohammad Amir : You are welcome! April 16, 2025 at 4:42 PM, Csanálosi Gábor FA : @Kovács Ágnes April 16, 2025 at 4:57 PM, Mohammad Amir : @Kovács Ágnes Please check this issue exists since 16:37 and because of this issue there is lack of Andoe Stacking materials. Please solve it on priority. Thank you! April 16, 2025 at 5:08 PM, Kovács Ágnes : Solved April 16, 2025 at 5:08 PM, Mohammad Amir : Thank you very much! April 16, 2025 at 5:44 PM, Joo : 작업 종료하였습니다. 자동모드 전환 완료하였습니다. April 16, 2025 at 5:49 PM, Mr.Miti (미티) FA : @Mohammad Amir An VD 10 AGV There is material in it but there is no task to take it to. Please generate a task. April 16, 2025 at 5:51 PM, Mohammad Amir : @ACS @Dariimaa/다리마/Ivancsa Please transfer the Unknown carrier located on teb AGV#10 to Post VD STK manually. Thank you very much! April 16, 2025 at 5:53 PM, Tumruu/투머르/IvancsaFA : Gf vd anod I can't send agv10 to 72. the mistake unknown carrier is not allowed April 16, 2025 at 5:54 PM, Mohammad Amir : Okay ,I am transferring. Thank you! April 16, 2025 at 5:55 PM, Tumruu/투머르/IvancsaFA : I told you about this mistake this morning. April 16, 2025 at 5:56 PM, Sazzad Bhai SKon : For this reason a manual job has been created to post VD STK for a UNK Carrier April 16, 2025 at 5:57 PM, Mohammad Amir : Carrier has started to move to destination to Post VD STK. ✅ Thank you very much! April 16, 2025 at 6:12 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 16, 2025 at 7:02 PM, 인제(Hwang) : @Mohammad Amir Please check the available materials. An reel has not arrived April 16, 2025 at 7:04 PM, VK (mcs) : There is no available material April 16, 2025 at 7:08 PM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) PM님 An M Lot 릴 자동출고 되고있는걸로 알고있는데 지금 MES 공정재고에는 자재 확인되나 미출고 중입니다. 확인 부탁드립니디 April 16, 2025 at 7:14 PM, 이주봉PM LEE JUBONG(FA) : MES 확인 결과 유수명 기간이 지났기 때문에 반송이 안되는것 같습니다. April 16, 2025 at 7:17 PM, 이주봉PM LEE JUBONG(FA) : EA1M073E로 생산된 LOT번호 전부 유수명이 지났습니다. 참고 부탁드려요~ April 16, 2025 at 7:17 PM, 인제(Hwang) : 확인 감사합니다 April 16, 2025 at 7:22 PM, VK (mcs) : @FA Please check the UNKDUP plate UNKDUP_MLA3004_250416161756A (C1STKA72, 0205301) April 16, 2025 at 7:29 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Load oversize error! April 16, 2025 at 7:42 PM, VK (mcs) : @FA Please check Anode reel conveyor E0CNVA52 -M05 LTA0551 full tray, yesterday transferred to that port by OP action This carrier does not belong to line 3, Please send it back to STK April 16, 2025 at 7:51 PM, VK (mcs) : No need anymore, I sent it.thx April 16, 2025 at 8:03 PM, VK (mcs) : @FA Please check VD conveyors both side anode and cathode C1CNV071 Run time over! April 16, 2025 at 8:14 PM, Eduard SL Shift A : Line 6 ST8 AGV10 stopped April 16, 2025 at 8:49 PM, VK (mcs) : @FA Please check Anode Post-STK A72 port 21(12004) and port 02(160033) PIO TR off time over error! April 16, 2025 at 9:18 PM, VK (mcs) : @Mr.Miti (미티) FA Hi Is there anyone to check upper issues tonight? April 16, 2025 at 10:52 PM, Eduard SL Shift A : Line 6 ST 17 AGV 6 stopped April 16, 2025 at 11:25 PM, VK (mcs) : @FA This error has not been solved. Please check it out. April 16, 2025 at 11:30 PM, P.Bence A SSL : @Nguyên …. April 16, 2025 at 11:33 PM, Nguyên : NC CA GF no reel.please check my inventory April 16, 2025 at 11:34 PM, VK (mcs) : STK was out of service Now it's fine and material is on the way April 16, 2025 at 11:36 PM, Nguyên : Thanks April 16, 2025 at 11:39 PM, 인제(Hwang) : NC An Robot#2 Error April 17, 2025 at 12:21 AM April 17, 2025 at 12:21 AM, 인제(Hwang) : This message was deleted. April 17, 2025 at 12:21 AM, 인제(Hwang) : @FA April 17, 2025 at 12:33 AM, VK (mcs) : @FA Please check Cathode reed STK C51 buffer port 10 (60001) Input H/S off! April 17, 2025 at 12:33 AM, VK (mcs) : Reel* April 17, 2025 at 2:18 AM, VK (mcs) : @FA Please check this error, Carrier is stopped at the buffer port and blocked others' way to CNV. Thx April 17, 2025 at 3:58 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16106) April 17, 2025 at 3:59 AM, VK (mcs) : @FA Please check Anode Post STK A72 Ready off during forking April 17, 2025 at 4:07 AM, Zaya/ivancsa FA : solved April 17, 2025 at 4:10 AM, 인제(Hwang) : @FA NC An Robot#1 Error April 17, 2025 at 5:33 AM, VK (mcs) : @FA Please check Anode pre-STK A71 port 18(6007) Output H/S off! April 17, 2025 at 6:15 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 8/12 Tech, 1Sl Overtime(0): Holiday(2): Csanálosi Gábor, Pintye Miklós Sick(1): Gerbovits Kevin, kovács Ágnes --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Rácz Dániel, Böröcz Zamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 17, 2025 at 6:22 AM, Shakir (MCS) : @FA @Rácz Dániel / FA Please check Anode pre-STK A71 port 18(6007) Output H/S off! Thank you April 17, 2025 at 7:07 AM, duzzaman Md (MCS) : @FA Kindly check E0STKC51_C01, Its one Load oversize error since 06:39 Thanks April 17, 2025 at 7:16 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 310 - Anode: 349 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 54 - Anode: 29 Thank you! April 17, 2025 at 7:16 AM, Böröcz Tamás : I appreciate it immensely. I am deeply grateful for your extensive effort. April 17, 2025 at 7:17 AM, Szücs Géza FT-B : @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA Can You check this, or i need go? April 17, 2025 at 7:18 AM, Jun(정우준)_SKOH FA : can you check it, please? April 17, 2025 at 7:20 AM, Szücs Géza FT-B : going, 20-30-40 min and done April 17, 2025 at 7:25 AM, Lan Nhi : @FA VD/An 6-2(#47), agv can only put 2 pallets into the machine. Please check for me. April 17, 2025 at 7:28 AM, duzzaman Md (MCS) : @FA For VD 6-3 AN, please check STK71 18_60_07 OUTPUT H/S off This is the reason why the job is getting delayed. Thanks ! April 17, 2025 at 7:28 AM, duzzaman Md (MCS) : 6-2* April 17, 2025 at 7:30 AM, Lan Nhi : @FA Nc. An agv number 2 error (5/3) April 17, 2025 at 7:54 AM, duzzaman Md (MCS) : @Rácz Dániel / FA Please take care of this issue as the soonest possible. April 17, 2025 at 7:55 AM, Böröcz Tamás : Solved April 17, 2025 at 7:55 AM, Rácz Dániel / FA : I don't know how to solve it. April 17, 2025 at 7:55 AM, Szücs Géza FT-B : solved de nem úgy, ahogy ésszerű lenne April 17, 2025 at 7:58 AM, duzzaman Md (MCS) : @Szücs Géza FT-B Please help with this one at your convenience. For VD 6-2 AN, please check STK71 18_60_07 OUTPUT H/S off This is the reason why the job is getting delayed. Thanks ! April 17, 2025 at 7:59 AM, duzzaman Md (MCS) : @SCS April 17, 2025 at 8:02 AM, Rácz Dániel / FA : Electrode is my field. I came here because of the few employees. April 17, 2025 at 8:04 AM, duzzaman Md (MCS) : I sincerely appreciate your tireless efforts and support. Let's try to keep the operation as smooth as possible. April 17, 2025 at 8:07 AM, Rácz Dániel / FA : I try delete the order April 17, 2025 at 8:08 AM, Szücs Géza FT-B : Sorry, i am on powder 1f at now April 17, 2025 at 8:11 AM, Rácz Dániel / FA : I deleted the port order 6007 and now new orders have been created. Maybe solved ? April 17, 2025 at 8:13 AM, duzzaman Md (MCS) : Need to press LR from VD April 17, 2025 at 8:13 AM, duzzaman Md (MCS) : @Manufacturing Please press LR at VD 6-2 AN for P03 & P04 April 17, 2025 at 8:15 AM, Shakir (MCS) : No, MLA4237 job terminated and already at C1STKA71_17 other two created, still problem exists H/S off. Thank you April 17, 2025 at 8:17 AM, Shakir (MCS) : Issue has been solved Crane started to deliver the carrier at P17 Thank you April 17, 2025 at 8:32 AM, Sazzad Bhai SKon : @FA Good morning. There is an unknown carrier (UNKDUP-MLA3004-250416161756A) Location: C2STKA72, 0205301. Please rack it out from manual port and restock. Thank you April 17, 2025 at 8:34 AM, Böröcz Tamás : We found the problem April 17, 2025 at 8:35 AM, Böröcz Tamás : We just have no tool April 17, 2025 at 8:36 AM, Böröcz Tamás : And we have more "support" than technican April 17, 2025 at 8:40 AM, Khaliun/Ivancsa FA : @fa tech pls check st72 April 17, 2025 at 8:56 AM, duzzaman Md (MCS) : @FA @Böröcz Tamás Please check E0STKC52_RTV01 RTV Unload start dest unload not busy timeover error Thank you April 17, 2025 at 9:03 AM, Böröcz Tamás : You had one job April 17, 2025 at 9:03 AM, Böröcz Tamás : But U missed it April 17, 2025 at 9:05 AM, Chinges Fa : Please st champer check out April 17, 2025 at 9:12 AM, duzzaman Md (MCS) : @Fa @Böröcz Tamás Please check E0STKC51_C01, Crane distance error Since 8:56, delaying several jobs . Thanks April 17, 2025 at 9:16 AM, duzzaman Md (MCS) : @FA C2CNV072 16_119: Data Loss error P06 & 16_064 : INV 01 Runtime over error Thank you. April 17, 2025 at 9:20 AM, Böröcz Tamás left this chatroom. April 17, 2025 at 9:26 AM, Szücs Géza FT-B : minden területen, mindenki türelmét szeretném kérni. A technikusi létszám a mai napon rendkívül alacsony. minden szintre csak 2 technikus van. April 17, 2025 at 9:27 AM, Takács Ádám FA Tech invited Böröcz Tamás. April 17, 2025 at 9:33 AM, Böröcz Tamás : There will be no technician until 11 we will check C51_c01. After this we will have lunch Thanks for understanding. Good luck April 17, 2025 at 9:47 AM, duzzaman Md (MCS) : @FA Several jobs are getting delayed for 'Load Oversize Error (left)' at C2STKA71_C01 Thank you. April 17, 2025 at 9:48 AM, Szücs Géza FT-B : Technicians going here: @FA Several jobs are getting delayed for 'Load Oversize Error (left)' at C2STKA71_C01 Thank you. April 17, 2025 at 9:48 AM, duzzaman Md (MCS) : This message was deleted. April 17, 2025 at 9:49 AM, duzzaman Md (MCS) : Thank you. Apologies, it'd be C1STKA71 April 17, 2025 at 9:53 AM, Szücs Géza FT-B : E0STKC51_C01 - Technician must exit the clearance area, go over the electrode to the other side of the building and enter from the top of the module. C2STKA71_C01 - in clean area April 17, 2025 at 9:53 AM, duzzaman Md (MCS) : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 309 - Anode: 337 VD Pre STK > VD - Cathode: 03 - Anode: 01 VD Post STK > Stacking - Cathode: 60 - Anode: 36 Thank you! April 17, 2025 at 9:54 AM, Debreczeni Ármin : Thank you so much! April 17, 2025 at 9:55 AM, duzzaman Md (MCS) : With pleasure. Sending you another one soon. April 17, 2025 at 10:06 AM, Lan Nhi : plz. RTV Ca is not providing 30 min reel. please check for me April 17, 2025 at 10:07 AM, Shakir (MCS) : The STK C51 is OOS, That why you reel supply has been stop. Thank you April 17, 2025 at 10:12 AM, Shakir (MCS) : Job exists for Line 6 as soon as STK becomes INVERVICE reel supply normalize. There is Crane Distance error occurred at 08:57 it cleared on 10:06 that why you face reel supply delayed. Thank you April 17, 2025 at 10:19 AM, Shakir (MCS) : Now RTV delivering the reel Issue has been resolved ✅ Thank you April 17, 2025 at 10:22 AM, 이한웅(삼구) : please check C1STKA71 April 17, 2025 at 10:24 AM, Lan Nhi : Thank you April 17, 2025 at 10:25 AM, Shakir (MCS) : You’re welcome April 17, 2025 at 11:37 AM, duzzaman Md (MCS) : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 308 - Anode: 337 VD Pre STK > VD - Cathode: 00 - Anode: 02 VD Post STK > Stacking - Cathode: 58 - Anode: 41 Thank you! April 17, 2025 at 11:38 AM, Debreczeni Ármin : Thank you April 17, 2025 at 12:13 PM, Lan Nhi : RTV. An, L6 is having an error. Please help me check it. Thanks. April 17, 2025 at 12:13 PM, Shakir (MCS) : @Fa Please check Thank you April 17, 2025 at 12:21 PM, duzzaman Md (MCS) : @FA Please check E0CNVA52_07_003 : Data mismatch error E0CNVA52_RTV01 : CV01 run time over alarm Thank you April 17, 2025 at 12:34 PM, Lan Nhi : @MCS. plz check machine 5-5(#41) agv can only put 2 pallets in to dry, please check for me. thanks April 17, 2025 at 12:38 PM, duzzaman Md (MCS) : There is an active LR but P04 is out of service in RTD. Please confirm if there's any issue with P04 ? Also there no lot available. April 17, 2025 at 12:46 PM, Böröcz Tamás : There is no port April 17, 2025 at 12:46 PM, Böröcz Tamás : It's VD machine April 17, 2025 at 12:54 PM, duzzaman Md (MCS) : Indeed, according to the RTD/MCS, there are four ports, two ports Up and two ports Down. Batch job will generate and agv will take up and down plate to deliver to the VD machine. April 17, 2025 at 12:54 PM, Shakir (MCS) : Now Job has been initiated for half chamber for port P03/P04. Thank you April 17, 2025 at 12:57 PM, Shakir (MCS) : Carrier on the way for VD chamber 5-5 CA. AGV#04 has been assigned Thank you April 17, 2025 at 1:02 PM, duzzaman Md (MCS) : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 315 - Anode: 335 VD Pre STK > VD - Cathode: 00 - Anode: 01 VD Post STK > Stacking - Cathode: 65 - Anode: 39 Thank you! April 17, 2025 at 1:05 PM, Böröcz Tamás : According to MCS we can see if there are any problem. We check it every time if we had time. So only talk if you have something to say. We are mechanic maintenance. So if any system failure occurs you can came down or ask the responsible person. We are there to change the parts of the machine. Long ago they promised us that they will compensated us in money. Still waiting for it. But patient is the past. Please take action as soon as possible. Thank you! April 17, 2025 at 1:08 PM, duzzaman Md (MCS) : I appreciate your dedication and regretfully acknowledge your efforts. We sincerely hope to hear from you in the future, when you are adequately compensated. Until then, we sincerely hope for your continued success. April 17, 2025 at 1:08 PM, Böröcz Tamás left this chatroom. April 17, 2025 at 1:13 PM, Szücs Géza FT-B invited Böröcz Tamás. April 17, 2025 at 1:33 PM, Sazzad Bhai SKon : This is machine status mismatched in RTD and MCS. We're checking further April 17, 2025 at 1:33 PM, Ngoc zia : @rtd can u help me check the position of reel id EA1P073F2158311A/B .pls April 17, 2025 at 1:35 PM, Shakir (MCS) : Checking April 17, 2025 at 1:35 PM, Lan Nhi : Yes. Thank you April 17, 2025 at 1:45 PM, duzzaman Md (MCS) : Last location was at EOCNVA52_M01 at 11:04 for EA1P073F2158311A For EA1P073F2158311B, last location was EOCNVA52_M02 at 11:06 April 17, 2025 at 1:49 PM, Ngoc zia : Thank you April 17, 2025 at 3:07 PM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_127 Data Mismatch Error April 17, 2025 at 3:21 PM, duzzaman Md (MCS) : @Fa Also please check E0STKA51_P01, Carrier: LTA0626 ITS BLOCKING OTHER CARRIERS. FROM MCS/RTD EVERYTHING SEEMS TO BE B OKAY. April 17, 2025 at 3:30 PM, duzzaman Md (MCS) : @FA @SCS Please check this one. 8 carriers are waiting behind it since 15:03 Thanks April 17, 2025 at 3:31 PM, Böröcz Tamás : @mcs it's empty April 17, 2025 at 3:33 PM, Böröcz Tamás : But in A52_P01 there is a carrier LTA0626 April 17, 2025 at 3:33 PM, Jun(정우준)_SKOH FA : I will check in 10 mints. April 17, 2025 at 3:33 PM, Böröcz Tamás : And 8 carrier is waiting April 17, 2025 at 3:33 PM, Böröcz Tamás : U meant this? April 17, 2025 at 3:34 PM, duzzaman Md (MCS) : Thank you April 17, 2025 at 3:34 PM, duzzaman Md (MCS) : Yes, carrier LTA0626 April 17, 2025 at 3:39 PM, Jun(정우준)_SKOH FA : someone solved it. thanks! April 17, 2025 at 3:40 PM, Böröcz Tamás : You are welcome April 17, 2025 at 3:40 PM, duzzaman Md (MCS) : Yes, its moving. Thank you April 17, 2025 at 3:51 PM, duzzaman Md (MCS) : @Fa Kindly check E0CNVA51_06_067 INV 01RUN time over error Its blocking other carriers. Thank you April 17, 2025 at 3:52 PM, Böröcz Tamás : A mongolian support stand next to it April 17, 2025 at 3:53 PM, Böröcz Tamás : But of course Hungarian slaves going to solve April 17, 2025 at 4:00 PM, Böröcz Tamás : Solved April 17, 2025 at 4:18 PM, Ngoc zia : @faVd Ca #38 can u manually with Agv & transport to STKC72 pls April 17, 2025 at 4:19 PM, Böröcz Tamás : Which line which mc? April 17, 2025 at 4:19 PM, Ngoc zia : 5-2 vd Ca side tks April 17, 2025 at 4:22 PM, Böröcz Tamás : Acs manual job is NG April 17, 2025 at 4:23 PM, duzzaman Md (MCS) : @manufacturing Please check C1CNV072_M01 1+2 CARRIER WAITING THANK YOU April 17, 2025 at 4:25 PM, Shakir (MCS) : Already job exists but alternated because suitable port not available all post vd ports are busy as soon as ports will free job will executed. Thank you April 17, 2025 at 4:26 PM, Ngoc zia : Thank you April 17, 2025 at 4:26 PM, Shakir (MCS) : You’re welcome April 17, 2025 at 4:28 PM, duzzaman Md (MCS) : This message was deleted. April 17, 2025 at 4:29 PM, duzzaman Md (MCS) : @FA Please check C1CNV072_M03. Safety door error Please note, There's shortage of Anode materials. Thanks ! April 17, 2025 at 4:32 PM, Ynja/ivancsa FA : Working on it April 17, 2025 at 4:35 PM, Chinges Fa : Please vd anode check out April 17, 2025 at 4:39 PM, Debreczeni Ármin : Send new one please April 17, 2025 at 4:42 PM, duzzaman Md (MCS) : @Debreczeni Ármin Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 323 - Anode: 331 VD Pre STK > VD - Cathode: 02 - Anode: 03 VD Post STK > Stacking - Cathode: 30 - Anode: 40 Thank you! April 17, 2025 at 4:44 PM, Debreczeni Ármin : Thank you April 17, 2025 at 4:48 PM, Yosyp Tovt : on line 6. 4 AGVs are not working April 17, 2025 at 5:07 PM, Yosyp Tovt : Pleas stacking does not supply anode material 5L 6 L April 17, 2025 at 5:08 PM, 이한웅(삼구) : please check NC An #2 Robot April 17, 2025 at 5:08 PM, duzzaman Md (MCS) : There's is an issue in circular conveyor. @FA team please check April 17, 2025 at 5:14 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 저희 공매거진 부족한데 확인 부탁드립니다... April 17, 2025 at 5:20 PM, Shakir (MCS) : There is currently issue with C1CNV072 AN side CNV that's why you witnessed delay in AN material FA team already working on it. STKA72 ports are OOS from 16:10 to till now causing delay in supply of AN ST material. Thank you very much! April 17, 2025 at 5:25 PM, Yosyp Tovt : Ok April 17, 2025 at 5:33 PM, Jun(정우준)_SKOH FA : someone check this plz April 17, 2025 at 5:33 PM, Böröcz Tamás : We already checked April 17, 2025 at 5:34 PM, Böröcz Tamás : It's working April 17, 2025 at 5:34 PM, KIM SEYEON [김세연]_FA : 👍 April 17, 2025 at 5:45 PM, Dmytro Poluekto : @fa AGV #10 was stopped on line 6 ST area, please check April 17, 2025 at 5:47 PM, Dmytro Poluekto : Sorry not 10, number 9 stooped April 17, 2025 at 5:49 PM, Dmytro Poluekto : Problem was solved April 17, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician, 1 Sl, ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— April 17, 2025 at 6:07 PM, Shahbaz 샤바즈 MCS/RTD : @FA Kindly check E0STKC52_C02, It’s on Load oversize error. Thanks April 17, 2025 at 6:17 PM, Jun(정우준)_SKOH FA : thank you so much. April 17, 2025 at 6:25 PM, Nguyên : NC CA GF Robot#3 Error April 18, 2025 at 1:03 AM April 18, 2025 at 1:03 AM, Shahbaz 샤바즈 MCS/RTD : @FA The reel trays are not moving to the Ca stocker C51 from CNVC51. Please check LTC1503 is at STKA51_P03 waiting for long time. Thank you April 18, 2025 at 1:03 AM, Mr.Miti (미티) FA : On my way. April 18, 2025 at 1:10 AM, Mr.Miti (미티) FA : Solved April 18, 2025 at 3:28 AM, Zulaa/졸라/Ivancsa FA : @FA NC AN robot# 1 error. Check please. April 18, 2025 at 4:16 AM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) PM님 이거 언제 조치되는건가요? April 18, 2025 at 4:20 AM, 이주봉PM LEE JUBONG(FA) : 제가 갈게여 April 18, 2025 at 4:22 AM, 인제(Hwang) : 넵 감사합니다 April 18, 2025 at 5:36 AM, 인제(Hwang) : NC Ca RTV Error April 18, 2025 at 5:44 AM, Mr.Miti (미티) FA : Solved April 18, 2025 at 6:26 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 18 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 18, 2025 at 6:36 AM, 최희철PM(조립_SKOH2) invited 규빈, 배준석 and 경휘. April 18, 2025 at 7:55 AM, Shakir (MCS) : @FA Please check E0STKC51_P02, INV-01 Run timeover Error. Thank you April 18, 2025 at 8:00 AM, Ynja/ivancsa FA : This message was deleted. April 18, 2025 at 8:16 AM, Yaroslav SL/C 6 line : Hello everyone @fa 5line ST #10 AGV2 stopped and take plate with full mgz, but ops didn’t push UR. Please check April 18, 2025 at 8:20 AM, 안진모 An Jin Mo invited 하연철. April 18, 2025 at 9:09 AM, QuangPhan : Hello! Good morning NC An 5/3 AGV #9 Error Thanks. April 18, 2025 at 9:57 AM, Sazzad Bhai SKon : @FA Good morning. There is an unknown carrier (UNKDUP-MLA3004-250416161756A) Location: C2STKA72, 0205301. Please rack it out from manual port and restock. Thank you April 18, 2025 at 9:58 AM, Sazzad Bhai SKon : *C1STKA72 April 18, 2025 at 11:49 AM, T. Gàbornè C SL NC : @Fa Gyertek légyszíves CA NC-ra Robot#2 MCS report incomplete error Köszönöm szépen. April 18, 2025 at 11:56 AM, 이한웅(삼구) : Hello. How much material is available in the stacking warehouse? Cathode. @Sazzad Bhai SKon April 18, 2025 at 11:56 AM, Shakir (MCS) : Checking April 18, 2025 at 11:57 AM, Böröcz Tamás : Szia! Vissza térő probléma.Valami Sajnos nem tudjuk megoldani. Jelezzük. April 18, 2025 at 12:00 PM, Shakir (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 374 - Anode: 346 VD Pre STK > VD - Cathode: 01 - Anode: 01 VD Post STK > Stacking - Cathode: 03 - Anode: 19 Thank you! April 18, 2025 at 12:00 PM, 이한웅(삼구) : @Kateryna SSL C @T. Gàbornè C SL NC April 18, 2025 at 12:02 PM, Hữu Thắng : @QuangPhan please send trainer to support Vera . April 18, 2025 at 12:35 PM, T. Gàbornè C SL NC : @fa Please check CA 5_01 VD BCR reading error Thx April 18, 2025 at 12:46 PM, Kateryna SSL C : Hello everyone! @fa Agv#4 stopped near ST 6/11. Check please April 18, 2025 at 12:49 PM, Yaroslav SL/C 6 line : Fixed April 18, 2025 at 12:57 PM, T. Gàbornè C SL NC : @Fa Please check CA VD 6_02 The mgz send the warehouse, the technicians check the machine. Thank you April 18, 2025 at 1:27 PM, Böröcz Tamás : Photo April 18, 2025 at 1:27 PM, Böröcz Tamás : Még aktuális? April 18, 2025 at 1:32 PM, T. Gàbornè C SL NC : Igen. April 18, 2025 at 1:34 PM, Böröcz Tamás : Úton vannak April 18, 2025 at 1:38 PM, Yaroslav SL/C 6 line : @mcs please share available lot. Thanks April 18, 2025 at 1:38 PM, Shakir (MCS) : Checking April 18, 2025 at 1:40 PM, Shakir (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 384 - Anode: 350 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 00 - Anode: 16 Thank you! April 18, 2025 at 1:50 PM, Shakir (MCS) : @Fa Please check C1STKC71 Load oversize error. Thank you April 18, 2025 at 1:51 PM, Böröcz Tamás : Yes we know thanks April 18, 2025 at 1:51 PM, Böröcz Tamás : We just solved it 5 minutes ago April 18, 2025 at 1:51 PM, Böröcz Tamás : This is todays speciality April 18, 2025 at 1:53 PM, Yaroslav SL/C 6 line : @fa AGV 9 stopped near 6line ST 18. Please check. April 18, 2025 at 2:01 PM, Karina : @fa Please, AGV Station near 5 line/STK machine #12 not working, you can check problem? Thank you April 18, 2025 at 2:21 PM, Karina : @mcs please, please cancel all Ca LR requests for 5 lines (STK). Thank you April 18, 2025 at 2:22 PM, Shakir (MCS) : Checking April 18, 2025 at 2:25 PM, Shakir (MCS) : There is No jobs for line 5 CA, No material available. Lot available CA: 00 AN: 13 Thank you April 18, 2025 at 2:27 PM, Karina : Thank you April 18, 2025 at 2:27 PM, Böröcz Tamás : But they requested. So maybe if there will be available material it will be actual April 18, 2025 at 2:27 PM, Böröcz Tamás : Or the request only works if there are available material? April 18, 2025 at 2:28 PM, Shakir (MCS) : Yes, whenever lot available automatically job will create. Thank you April 18, 2025 at 2:56 PM, Shakir (MCS) : @Karina @All ST OP Please inform us when you need material for line 5 CA, we make all requested LR ports OOS. Now whenever material available, job will create for line 6 only. Currently LoT available CA:00 AN:19 Thank you April 18, 2025 at 3:02 PM, Karina : please can you update the work, Thank you April 18, 2025 at 3:03 PM, Shakir (MCS) : Means lot available? April 18, 2025 at 3:04 PM, Karina : Yea, please April 18, 2025 at 3:05 PM, Shakir (MCS) : ST lot available CA: 00 AN: 18 Thank you April 18, 2025 at 3:08 PM, T. Gàbornè C SL NC : @Fa Please check CA VD AGV no move mgz VD chamber. Thanks. April 18, 2025 at 3:09 PM, Böröcz Tamás : Melyik gép? April 18, 2025 at 3:12 PM, T. Gàbornè C SL NC : Állnak a kemencék, a raktárból nem pakolja be a mgz-at. April 18, 2025 at 3:13 PM, Böröcz Tamás : @mcs Could you share the available lots? April 18, 2025 at 3:13 PM, Shakir (MCS) : This message was deleted. April 18, 2025 at 3:13 PM, Shakir (MCS) : Checking April 18, 2025 at 3:15 PM, Shakir (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 385 - Anode: 351 VD Pre STK > VD - Cathode: 01 - Anode: 01 VD Post STK > Stacking - Cathode: 00 - Anode: 18 Thank you! April 18, 2025 at 3:20 PM, Böröcz Tamás : @T. Gàbornè C SL NC nincs elég magazin a raktárban April 18, 2025 at 3:20 PM, Böröcz Tamás : @Shakir (MCS) thanks April 18, 2025 at 3:23 PM, T. Gàbornè C SL NC : 10 platet látok bent April 18, 2025 at 3:25 PM, Böröcz Tamás : Valószínűleg nem felelnek meg a feltételeknek, pl: QC:Ok vagy ilyesmi okból nem elérhető az MCSbe April 18, 2025 at 3:25 PM, T. Gàbornè C SL NC : C1STKC71 stocker #1: 12 plate Ezek mennének a VD-be. Megnéznétek mégegyszer. April 18, 2025 at 3:32 PM, Böröcz Tamás : Nem mutatta a hibát MCSbe, mert valaki kinyomta és úgy hagyta. Emiatt nálunk úgy tűnt hogy működik a daru... Valószínűleg állítottak a sebességén a darunak, hogy jobban teljesítsen, de kontraproduktív volt, mert elmozdul a magazin szállítás közben. April 18, 2025 at 3:57 PM, Dima Kusyk : Hello everyone! Please share information about available pleats Ca for STK. Thanks! April 18, 2025 at 4:02 PM, Shakir (MCS) : VD Post STK > Stacking - Cathode: 04 - Anode: 16 Thank you! April 18, 2025 at 4:14 PM, T. Gàbornè C SL NC : @Fa Please help. CA VD 6_01 machine stop Bottom left heater NFB OFF status Please send the mgz warehouse. Thanks. April 18, 2025 at 4:16 PM, Böröcz Tamás : Úton vannak April 18, 2025 at 4:32 PM, Shakir (MCS) : Please inform us when you would like to receive materials at line-5. We will make process normal from MCS end. Currently lot available CA:08 AN:23 Thank you April 18, 2025 at 4:33 PM, Karina : we want to receive, LD has already submitted a request a long time ago April 18, 2025 at 4:33 PM, Karina : Thank you April 18, 2025 at 4:35 PM, Shakir (MCS) : So we make it INSERVICE line 5 Thank you April 18, 2025 at 4:35 PM, Karina : Thank you for your help :) April 18, 2025 at 4:40 PM, Shakir (MCS) : Update: Line 5 For ST: 5-5, 5-8 & 5-11 material on the way ✅ Thank you April 18, 2025 at 4:58 PM, QuangPhan : Hello! @FA NC AN 5/2 AGV #2 error. Thanks April 18, 2025 at 4:59 PM, Böröcz Tamás : Hello! Operators must hurry to start the notching machine because the AGV cannot unload the magazines because it's not empty April 18, 2025 at 5:00 PM, Böröcz Tamás : Thanks April 18, 2025 at 5:13 PM, Dima Kusyk : @fa Line 6/STK AGV#2 stopped, please check it. Thanks April 18, 2025 at 5:13 PM, Yaroslav SL/C 6 line : Near machine 20 April 18, 2025 at 5:17 PM, Shakir (MCS) : VD Post STK > Stacking - Cathode: 00 - Anode: 30 Thank you! April 18, 2025 at 6:03 PM, Dariimaa/다리마/Ivancsa : 04.18 Night shift GF - Dariimaa Selem GF EL- Zulaa Badmaa April 18, 2025 at 6:05 PM, 김지수PM(Gyuri)_FA : Sziasztok Night shift FA Technician Schedule Date: 2025.04.18 Time:18:00-06:00 1. Bang hyuk 2. Kim Jisoo Köszönöm szépen April 18, 2025 at 6:06 PM, Simon Dávid D SL NC : @FA hello NC CA #5 AGV megált,megnéznétek köszönöm April 18, 2025 at 6:16 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (3):Csanálosi Gábor, Nagy Tibor, Céhman Zsolt, Sick (0):- Holiday (1):- Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András, Kiss Balázs, Céhman Zsolt Assembly(8): GF: Novák Zoltán, Kovács Szabolcs, Csanálosi Gábor, Zsurbej Zsolt 1F:Nagy Zsolt, Novák Károly, Kasztel Balázs, Nagy Tibor Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 18, 2025 at 6:36 PM, Shahbaz 샤바즈 MCS/RTD : @Fa Please check E0STKA51_C02, port interface error. Thank you April 18, 2025 at 6:48 PM, N.Zoli F.A. : Solved April 18, 2025 at 7:36 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello VD CA 05_04 ,05_03 manuálisan lett kipakolva kérem az adatok törlését és a kemence újra bepakolását ,köszönóm April 18, 2025 at 7:40 PM, Shahbaz 샤바즈 MCS/RTD : Plates already removed right? i will update the data and then please LR again. Thank you. April 18, 2025 at 7:43 PM, Simon Dávid D SL NC : Yes, the plate was removed. April 18, 2025 at 7:46 PM, Shahbaz 샤바즈 MCS/RTD : Okay, I updated in MCS as well. April 18, 2025 at 9:17 PM, Zsurbej Zsolt F.A. : @Shahbaz 샤바즈 MCS/RTD hello VD CA 05_05 was manually unpacked, please delete the data, thank you April 18, 2025 at 9:18 PM, Shahbaz 샤바즈 MCS/RTD : @Fa Please check E0STKC52_C02, load oversize error. Thank you April 18, 2025 at 9:21 PM, Shahbaz 샤바즈 MCS/RTD : MCS data updated for VD Ca 5-5. April 18, 2025 at 9:27 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello VD CA05_05 ,05_07, 06_10 manuálisan lett kipakolva kérem az adatok törlését és a kemence újra bepakolását ,köszönöm April 18, 2025 at 9:38 PM, Shahbaz 샤바즈 MCS/RTD : Data updated for VD CA 05-05 and 06-10. There is no unload_complete from so please confirm, should I update 05-07 as well? April 18, 2025 at 9:40 PM, Simon Dávid D SL NC : 05-07 OP kipakoltata AGV ,akkor nem kell. April 18, 2025 at 9:54 PM, Shahbaz 샤바즈 MCS/RTD : Plates are removed from 5-7 right? There are still jobs exit for this chamber. April 18, 2025 at 9:55 PM, Simon Dávid D SL NC : I am watching. April 18, 2025 at 9:58 PM, Simon Dávid D SL NC : 05-07 kemence most lett kipakolva manuálisan April 18, 2025 at 10:00 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD 05_07 és kemencébe szeretnék törlést és bepakolást kérni,köszönöm April 18, 2025 at 10:01 PM, Shahbaz 샤바즈 MCS/RTD : Okay, I updated the data in MCS as well. April 18, 2025 at 10:26 PM, 하연철 invited 하연철(HA YEONCHEOL)/. April 18, 2025 at 10:52 PM, 김수민 : Plz check ca vd agv#3 April 18, 2025 at 11:25 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKC51_C01 there Is crane distance error . Thank you! April 18, 2025 at 11:58 PM, Oláh András invited cehmannzsoltcehmann. April 19, 2025 at 12:21 AM April 19, 2025 at 12:21 AM, Shahbaz 샤바즈 MCS/RTD : @FA The reel trays are not moving to the AN stocker A52 from CNVA51. Please check LTA1757 is at STKA52_P01 for long time. Thank you April 19, 2025 at 12:28 AM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello van 6 plate magazin a 71-es CA raktárba de nem pakolja be a VD,megnéznéd köszönöm April 19, 2025 at 12:29 AM, Mr.Miti (미티) FA : Checking April 19, 2025 at 12:30 AM, Simon Dávid D SL NC : 6 sora 22:00-kor pakolt utoljára. April 19, 2025 at 12:33 AM, Shahbaz 샤바즈 MCS/RTD : According to RTD next lot there are only 3 available plates after filtering so when it is 4, job will be created for one VD machine. April 19, 2025 at 12:36 AM, Mr.Miti (미티) FA : Solved! Thank you for informing! April 19, 2025 at 12:40 AM, Shahbaz 샤바즈 MCS/RTD : Three plate are not transferrable which we can see in RTD list: MLC2019 is at Manual port. MLC3123 and MLC2215 have MES missing data. April 19, 2025 at 1:34 AM, 김수민 : Plz check CA NC CISTK71-CO1 April 19, 2025 at 1:35 AM, Csanálosi Gábor FA : Noticed, coming April 19, 2025 at 1:39 AM, Csanálosi Gábor FA : Done April 19, 2025 at 1:59 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please LR again for VD Ca 05-05 empty half chamber. Thank you. April 19, 2025 at 3:02 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 CA VD 5-5 하프챔버임니다 April 19, 2025 at 3:03 AM, 김수민 : @Shahbaz 샤바즈 MCS/RTD Can you check LR CA VD 6-2,3,8,9 April 19, 2025 at 3:07 AM, Shahbaz 샤바즈 MCS/RTD : LR is up for all these 4 VD machines. April 19, 2025 at 3:08 AM, Elena SL : Hello all! @Fa please check AGV #10 near Line 5 ST … Align SW LIMIT (error 612) April 19, 2025 at 3:08 AM, Shahbaz 샤바즈 MCS/RTD : 6-2,3,4,9 April 19, 2025 at 3:11 AM, Shahbaz 샤바즈 MCS/RTD : Sorry is the VD CA 6-4 manually removed? It is showing full in MCS but LR received. April 19, 2025 at 4:35 AM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello NC CA nem jönnek a reelek EC1M073,megnéznéd ,köszönöm April 19, 2025 at 4:46 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check LTC0142 at E0STKC51_P02, it is nit moving for long time causing delay for notching reel delivery. Thank you April 19, 2025 at 4:56 AM, Csanálosi Gábor FA : Solved April 19, 2025 at 5:45 AM, Simon Dávid D SL NC : @FA hello NC CA megált a reel raktár megnéznétek köszönöm April 19, 2025 at 6:03 AM, Mohammad Amir : @FA Please check and confirm is someone working on E0CNVC52_RTV01 ,it is. Showing open door and cause of it ,it is OOS and blocking reels delivery. Thank you! April 19, 2025 at 6:04 AM, Mohammad Amir : @FA Also please check C1CNV072_16_135 there is Data Loss Error and it is blocking stacking materials delivery. Thank you! April 19, 2025 at 6:07 AM, T. Gàbornè C SL NC : @fa jó reggelt Megtudnátok nézni CA oldalon az 52-es raktárnál miért nem jönnek a reelek? Köszönöm April 19, 2025 at 6:07 AM, Mohammad Amir : Good morning, Reels are not coming because RTV01 is OOS ,I already informed the FA team. Thank you! April 19, 2025 at 6:21 AM, Mohammad Amir : Reels CA delivery has been normalised now ✅. Thank you! April 19, 2025 at 6:27 AM, Mohammad Amir : @Nagy Tamás FA @FA Please check E0CNVC52_RTV01 there is Runtime Over alarm and it has blocked reels delivery again. Thank you very much! April 19, 2025 at 6:31 AM, Nagy Tamás FA : Solved April 19, 2025 at 6:31 AM, Mohammad Amir : Thank you very much! April 19, 2025 at 6:43 AM, Mohammad Amir : @Nagy Tamás FA Please check this error comes up again. Thank you! April 19, 2025 at 6:53 AM, Yon Ko/연커/ : Good morning @MCS VD CA chamber 5-5 please check this half chamber. Thank u. April 19, 2025 at 6:54 AM, Mohammad Amir : Good morning, Checking! April 19, 2025 at 7:00 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 19 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 19, 2025 at 7:01 AM, Mohammad Amir : Please press LR again for 5-5 CA VD P01 /02 . Thank you very much! April 19, 2025 at 7:09 AM, Mohammad Amir : @FA @Nagy Tamás FA Also please check C1CNV072_16_135 there is Data Loss Error and it is blocking stacking materials delivery. Thank you! April 19, 2025 at 7:12 AM, Amgaa FA : solved April 19, 2025 at 7:12 AM, Mohammad Amir : Thank you very much! April 19, 2025 at 7:12 AM, Mohammad Amir : @Amgaa FA @FA Please check E0CNVC52_RTV01 there is Runtime Over alarm and it has blocked reels delivery again. Thank you very much! April 19, 2025 at 7:15 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA @Baek Hojong(백호종)FA 안녕하세요. 지금 1년째 문의 드리는 내용인데 전창고에 파란색으로 표시되는 플레이트는 왜 발생하는건거요? 꺼내보면 대부분 풀매거진인데 방치되어 있습니다. April 19, 2025 at 7:19 AM, T. Gàbornè C SL NC : @fa Nagyon fontos, hogy CA oldalon folyamatos legyen a reel ellátásunk, kérlek benneteket kiemelten figyeljetek rá. Köszönöm szépen. April 19, 2025 at 7:21 AM, Yon Ko/연커/ : Hungarian technician working on it. April 19, 2025 at 7:21 AM, Mohammad Amir : Thank you very much for the information ! April 19, 2025 at 7:27 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 283 - Anode: 229 VD Pre STK > VD - Cathode: 02 - Anode: 03 VD Post STK > Stacking - Cathode: 00 - Anode: 127 Thank you! April 19, 2025 at 8:04 AM, Jun(정우준)_SKOH FA : 확인해보겠습니다. April 19, 2025 at 8:27 AM, Mohammad Amir : @FA @Nagy Tamás FA Also please check C1CNV072_16_135 there is Data Loss Error and it is blocking stacking materials delivery. Thank you! April 19, 2025 at 8:28 AM, Yon Ko/연커/ : Solved April 19, 2025 at 8:28 AM, Mohammad Amir : Thank you very much! April 19, 2025 at 8:30 AM, Mohammad Amir : @CCS Could you please check C1CNV072_16_135 since morning I have witnessed data loss Error on this Port. This error is keep occuring frequently since morning. Thank you very much! April 19, 2025 at 8:48 AM, T. Gàbornè C SL NC : @fa Please check CA NC reel warehouse #51, no move reel. Thx April 19, 2025 at 8:51 AM, Mohammad Amir : For your information, Both cranes of E0STKC51_C01/C02 are working and transferring materials. Reels LTC1786 also on the way for E0CNVC52_M02. Everything has been normalised ✅ now. Thank you! April 19, 2025 at 8:54 AM, Mohammad Amir : Buffer ports for line -6 (BF02~05 and BF10 are filled with reels. For line-5 there reels jobs are Already on the way to Manual ports of E0STKC51(M04,05,06). I am monitoring the whole process. Thank you! April 19, 2025 at 9:56 AM, Mohammad Amir : @FA @Nagy Tamás FA @Yon Ko/연커/ Please check E0CNVA52 _07_041 there is Turn Abnormal Error and RTV is OOS as a result reels delivery has stopped for line -6. Thank you very much! April 19, 2025 at 10:08 AM, Nagy Tamás FA : Korean technicians are already working on it April 19, 2025 at 10:08 AM, Mohammad Amir : Thank you very much for the information! April 19, 2025 at 10:29 AM, Mohammad Amir : @CCS This issue ccured again at C1CNV072_16_135 ,since morning this error is coming frequently from this Port. Thank you very much! April 19, 2025 at 10:37 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN. We didn’t recieved material for a while. Thanks. April 19, 2025 at 10:38 AM, Mohammad Amir : Hello, As i received information from FA team that Currently Korean Technicians are working on E0CNVA52 that's why you don't receive materials . Thank you very much! April 19, 2025 at 10:38 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKC71_C02 there is Load Oversize error (Right). Thank you very much! April 19, 2025 at 10:39 AM, QuangPhan : Thank you so much. April 19, 2025 at 10:39 AM, Mohammad Amir : You are welcome! April 19, 2025 at 10:42 AM, Mohammad Amir : @Jun(정우준)_SKOH FA Sir, Is there maintainance work still going on E0CNVA52 ? Currently there is short of AN reels . Thank you very much! April 19, 2025 at 10:45 AM, Jun(정우준)_SKOH FA : now I m going there. I think CnC guys are doing something. April 19, 2025 at 10:45 AM, Mohammad Amir : Okay Sir, Thank you very much! April 19, 2025 at 10:53 AM, Mohammad Amir : @FA @Yon Ko/연커/ Also please check C1CNV072_16_135 there is Data Loss Error and it is blocking stacking materials delivery. Thank you! April 19, 2025 at 10:57 AM, T. Gàbornè C SL NC : @fa Sziasztok Megtudnátok nézni CA oldalon az #51#52-es raktárnál miért nem jönnek a reelek? Köszönöm April 19, 2025 at 10:57 AM, Mohammad Amir : Checking April 19, 2025 at 11:00 AM, Mohammad Amir : Ca Reels on the way for both Line-5&6 . ✅ Thank you very much! April 19, 2025 at 11:16 AM, Nagy Tamás FA : @Mohammad Amir GF AN VD #6AGV cannot unload into the 5-5 machine. Could you please delete the command and send it somewhere? Or give this task to another AGV. Thank you very much. April 19, 2025 at 11:20 AM, T. Gàbornè C SL NC : @FA Please check VD CA AGV#2 machine stop Thanks April 19, 2025 at 11:22 AM, Mohammad Amir : Checking April 19, 2025 at 11:23 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. @Yon Ko/연커/ please send materials on the AGV#6 to the STK. Thank you very much! April 19, 2025 at 11:31 AM, Mohammad Amir : Good Afternoon Sir @Jun(정우준)_SKOH FA Sir, please check C1CNV072_16_135 since morning this Port is having frequent errors and most of these errors are Data loss Error. Thank you very much! April 19, 2025 at 11:35 AM, Jun(정우준)_SKOH FA : now I m checking it April 19, 2025 at 11:35 AM, Jun(정우준)_SKOH FA : thx! April 19, 2025 at 11:35 AM, Mohammad Amir : Thank you very much sir! April 19, 2025 at 11:55 AM, Mohammad Amir : For your Information, Reels AN delivery has been normalised now ✅ Thank you very much! April 19, 2025 at 11:59 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKC71_C02 there is Load Oversize error (Right). Thank you very much! April 19, 2025 at 12:00 PM, Mohammad Amir : Left* April 19, 2025 at 12:22 PM, T. Gàbornè C SL NC : @MCS NC CA #51 please check, no move reels. Thanks. April 19, 2025 at 12:22 PM, Mohammad Amir : Checking April 19, 2025 at 12:25 PM, Mohammad Amir : Issue has been resolved,Reels are on the way ✅. You will receive it soon. Thank you very much for! April 19, 2025 at 12:30 PM, T. Gàbornè C SL NC : Thx April 19, 2025 at 12:30 PM, Mohammad Amir : You are welcome! April 19, 2025 at 1:03 PM, QuangPhan : Hello! @FA Please check AGV empty MGZ loader for 5/3 AN. Almost out of empty Mgz because AGV is not delivering. thanks. April 19, 2025 at 1:05 PM, Mohammad Amir : AGV#5 and #7 on the way with empty magzine ✅. Checking further. Thank you very much! April 19, 2025 at 1:06 PM, QuangPhan : Thank you. April 19, 2025 at 1:06 PM, Mohammad Amir : You are welcome! April 19, 2025 at 1:08 PM, Mohammad Amir : Issue has been resolved ✅. AGV#5 has already delivered the empty Magazine and AGV#7 has also about to deliver. Thank you very much! April 19, 2025 at 1:15 PM, Mohammad Amir : @FA @Amgaa FA Please check C1STKA71_C01 there is Ready off during Forking error. Thank you! April 19, 2025 at 1:18 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0CNVA52 _07_052 there is Turn Abnormal Error and it is blocking reels delivery. Thank you very much! April 19, 2025 at 1:21 PM, Mohammad Amir : This message was deleted. April 19, 2025 at 1:40 PM, Mohammad Amir : @Manufacturing @Yon Ko/연커/ Please press LR again for 5-5 CA VD P01 /02 ,there is half chamber situation. Thank you very much! April 19, 2025 at 1:40 PM, Nagy Tamás FA : I have another problem. I will arrive soon. April 19, 2025 at 1:52 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 248 - Anode: 189 VD Pre STK > VD - Cathode: 00 - Anode: 01 VD Post STK > Stacking - Cathode: 38 - Anode: 160 Thank you! April 19, 2025 at 2:18 PM, Mohammad Amir : @Manufacturing Please check C1CV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! April 19, 2025 at 2:27 PM, Mohammad Amir : This message was deleted. April 19, 2025 at 2:27 PM, Karina : @fa Please, M02 not working (STK), you can check ? April 19, 2025 at 2:28 PM, Mohammad Amir : @FA @Yon Ko/연커/ / @Amgaa FA Please check LTA1566 located at E0CNVA52_07_052 it is not moving and Because of this AN reels supply has been stopped. Everything is good from MCS RTd side. Please take action on priority. Thank you very much! April 19, 2025 at 2:29 PM, Mohammad Amir : Could you please check For MLA4170 magazine MA2296 is not closed that's why Rackin is not successful. Thank you very much! April 19, 2025 at 2:38 PM, Mohammad Amir : Now issue has been resolved and Job has been created to destination C1STKA71_Z01. ✅ Thank you very much! April 19, 2025 at 2:39 PM, Karina : thank you too for your help April 19, 2025 at 2:40 PM, Mohammad Amir : You are welcome! April 19, 2025 at 2:45 PM, Mohammad Amir : @FA @Nagy Tamás FA @Amgaa FA Please check this issue on priority as there is no reel Anode available for production on the CNVA52. Because of this issue reels AN delivery has stopped. Thank you very much! April 19, 2025 at 2:56 PM, Karina : @Mohammad Amir Can you please provide information why the anode material is not being supplied? Stk/5 line April 19, 2025 at 2:56 PM, Mohammad Amir : Checking April 19, 2025 at 2:58 PM, Karina : 6 line same situation April 19, 2025 at 2:59 PM, Karina : looks like stoker 72 is not working properly April 19, 2025 at 3:04 PM, Mohammad Amir : @FA @Nagy Tamás FA Could you please check 16033 (C2STKA72_P02). Please confirm is it empty or full ? All the stacking Anode materials are not moving cause from SCS side we are receiving that Carrierid exists at 16033. Thank you very much! April 19, 2025 at 3:05 PM, Mohammad Amir : Please look into this as there is no Anode materials available for stacking at the CNV072. Thank you very much! April 19, 2025 at 3:17 PM, Mohammad Amir : @FA @Amgaa FA Please check this issue as there is no Anode stacking materials available. Thank you very much! April 19, 2025 at 3:18 PM, Karina : This message was deleted. April 19, 2025 at 3:18 PM, Jun(정우준)_SKOH FA : I checked. it working April 19, 2025 at 3:19 PM, Mohammad Amir : Thank you very much Sir , It has started to work now. Anode stacking materials on the way. ✅ April 19, 2025 at 3:20 PM, Mohammad Amir : 6 Anode materials on the way from STKA72 to CNV072. ✅ I am monitoring the process. Thank you very much! April 19, 2025 at 3:21 PM, Mohammad Amir : @FA @Amgaa FA Please check C1STKC71_C02 there is Load Oversize Error (Left). Thank you! April 19, 2025 at 3:22 PM, Jun(정우준)_SKOH FA : this kind of production problem happened, whenever call me please. thanks. April 19, 2025 at 3:22 PM, Mohammad Amir : Sure Sir,I will definitely call you . Thank you very much Sir! April 19, 2025 at 3:23 PM, Mohammad Amir : Now everything has been normalised ✅. I am monitoring the whole process. Thank you very much Sir! April 19, 2025 at 3:24 PM, Karina : But for 5 line? 1 side of the stacking has no plates at all April 19, 2025 at 3:24 PM, Mohammad Amir : Materials are in the way as issue just resolved recently. Slowly you will receive Line-5 and Line-6 both. Thank you very much! April 19, 2025 at 3:31 PM, Mohammad Amir : Update :- AGV# 1 with Anode materials to line -5 ✅. AGV#7 with Anode materials to line -6 ✅ one the way. Slowly lines will be filled with materials again. Thank you very much! April 19, 2025 at 3:35 PM, Jun(정우준)_SKOH FA : if you need more magazines, I can give you manually. April 19, 2025 at 3:42 PM, Mohammad Amir : @Jun(정우준)_SKOH FA Sir,Please check LTA1235 located at E0CNVA52_07_052 it is not moving and Because of this AN reels supply has been stopped. Everything is good from MCS /RTD side. ✅ This is the second time when at E0CNVA52_07_052 carrier stucked. Thank you very much! April 19, 2025 at 4:08 PM, Mohammad Amir : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01,it will increase stacking materials delivery speed. Thank you very much! April 19, 2025 at 5:01 PM, Mohammad Amir : @FA @Amgaa FA Please check E0STKC52 _C02 there is Fork#2 Receive Data Error. Thank you very much! April 19, 2025 at 5:14 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 246 - Anode: 209 VD Pre STK > VD - Cathode: 02 - Anode: 03 VD Post STK > Stacking - Cathode: 46 - Anode: 148 Thank you! April 19, 2025 at 5:56 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(5): Novák Zoltán, Kovács Szabolcs, Zsurbej Zsolt, Nagy Zsolt, , Kasztel Balázs, Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 19, 2025 at 6:58 PM, Ivan Chobitko : Good evening everyone @fa Please check AGV 10, front of the line 5 ST Problem looks like he wants to get up to charge, but the place is taken by another robot April 19, 2025 at 6:59 PM, Ivan Chobitko : traffic is almost at a standstill April 19, 2025 at 7:00 PM, Simon Dávid D SL NC : @FA hello #3 robot NC CA error,megnéznétek köszónöm April 19, 2025 at 7:01 PM, Ivan Chobitko : nobody came, but the problem is solved, thanks ;) April 19, 2025 at 7:02 PM, Dániel Hufnágel : We worked on in dont worry(thumbsup)(thumbsup) April 19, 2025 at 7:03 PM, Dániel Hufnágel : Úton April 19, 2025 at 8:24 PM, 김수민 : @mcs Plz check AN VD 6-5 LR April 19, 2025 at 8:25 PM, Elena SL : @FA Hello all. Please check AGV#5 near line 6 ST. thank you April 19, 2025 at 8:35 PM, VK (mcs) : LR received at 20:28:13 April 19, 2025 at 9:02 PM, VK (mcs) : @FA Please check Circular Logistic conveyor C1CNV072 (16100) Carrier is not moving. Thx April 19, 2025 at 11:09 PM, 김수민 : @VK (mcs) MLA1044, MLA4176, MLA2005, MLA0154 - Can you tell me where are now? April 19, 2025 at 11:11 PM, VK (mcs) : MLA1044 :C0PVA030-P02 MLA4176: C6VDA010_P01 MLA2005:C6VDA030-P02 MLA0154: C1STKA71(0205006) April 19, 2025 at 11:17 PM, 김수민 : @Simon Dávid D SL NC @Cao thi my linh April 19, 2025 at 11:17 PM, 김수민 : Thank you April 19, 2025 at 11:40 PM, VK (mcs) : @FA Please check Anode reel STK A51 Load oversize error! April 20, 2025 at 12:18 AM April 20, 2025 at 12:18 AM, 김수민 : Plz recheck April 20, 2025 at 12:22 AM, VK (mcs) : Next LOT quantity GF Pre STK > Notching - Cathode: 235 - Anode: 197 Pre STK > VD - Cathode: 03 - Anode: 02 Post STK > Stacking - Cathode: 52 - Anode: 161 April 20, 2025 at 2:33 AM, Simon Dávid D SL NC : @FA VD AN #7 AGV error,megnéznétek,köszönöm April 20, 2025 at 3:21 AM, VK (mcs) : Next LOT quantity GF Pre STK > Notching - Cathode: 234 - Anode: 197 Pre STK > VD - Cathode: 02 - Anode: 02 Post STK > Stacking - Cathode: 50 - Anode: 160 April 20, 2025 at 5:42 AM, 김수민 : @VK (mcs) Can you tell me the lot id of the reel in LTA1315 April 20, 2025 at 5:47 AM, Mohammad Amir : Checking April 20, 2025 at 5:51 AM, Mohammad Amir : We are receiving Lot id doesn't exists ,Lot id is similar to Carrier id LTA1315. Please check this. Thank you very much! April 20, 2025 at 5:53 AM, Yulya Kirsanova : Hello. Agv#8 stopped with error near Staсking Line 6/18 Please check @fa Thank you so much. April 20, 2025 at 6:03 AM, Mohammad Amir : This message was deleted. April 20, 2025 at 6:04 AM, Mohammad Amir : For your information Sir, Before the carrier LTA1315 was stored in the STK A51 with Lot id EA1M073E9102B13B. But now when you try to rackin from E0STKA51_M04 we received RackinValid reply as this Lot id doesn't exists. Thank you very much! April 20, 2025 at 6:04 AM, Dima Kusyk : @fa Good morning everyone! Line 5/STK AGV#10 stopped near STK07, please check. Thanks April 20, 2025 at 6:07 AM, Mohammad Amir : @FA Please check E0STKC51_C02 there is Travel Driver error. Thank you! April 20, 2025 at 8:17 AM, 인제(Hwang) : NC Ca AGV#10 Error April 20, 2025 at 9:43 AM, Mohammad Amir : @FA Please check C1STKC71_P17/18 there is light curtain error and it has blocked the travfer to VD 5-5 CA half chamber. Thank you! April 20, 2025 at 10:06 AM, QuangPhan : Hello! @FA Please check AGV empty MGZ loader for 6/2 AN. Almost out of empty Mgz because AGV is not delivering. thanks. April 20, 2025 at 10:07 AM, Mohammad Amir : Checking April 20, 2025 at 10:09 AM, Mohammad Amir : AGV#4 on the way with empty magazine for 6-2 AN NC _P03 port. ✅ Resolving further. Thank you! April 20, 2025 at 10:10 AM, QuangPhan : Thank you so much! April 20, 2025 at 10:11 AM, Mohammad Amir : For 6-2 NC AN _P04, Issue has been resolved,Job has also created ✅. Empty magazine on the way. Thank you! April 20, 2025 at 10:12 AM, Mohammad Amir : You are welcome! April 20, 2025 at 10:50 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 230 - Anode: 204 VD Pre STK > VD - Cathode: 00 - Anode: 02 VD Post STK > Stacking - Cathode: 61 - Anode: 155 Thank you! April 20, 2025 at 11:13 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0STKC52_C01 there is Load Oversize error (Left). Thank you! April 20, 2025 at 11:51 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKC71_P15/16 there is light curtain error and it has blocked the travfer to VD 6-2 CA half chamber. Thank you! April 20, 2025 at 12:18 PM, T. Gàbornè C SL NC : @FA Hello Please check CA Robot#3 Thx April 20, 2025 at 12:57 PM, Mohammad Amir : @Nagy Tamás FA Please check C1STKA72 _C01 there is ready off during Forking error. Thank you very much! April 20, 2025 at 3:02 PM, QuangPhan : @FA Hello NC AN 6/3 AGV #9 error. Thanks April 20, 2025 at 3:10 PM, Yon Ko/연커/ : Solved April 20, 2025 at 3:30 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0STKC51_C02 there is Travel Driver error. Thank you! April 20, 2025 at 3:35 PM, QuangPhan : Thank you April 20, 2025 at 3:46 PM, Yaroslav SL/C 6 line : @fa AGV1 stopped with half out fork near 6line ST#9, please check it. Thanks April 20, 2025 at 4:11 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 224 - Anode: 193 VD Pre STK > VD - Cathode: 01 - Anode: 02 VD Post STK > Stacking - Cathode: 69 - Anode: 146 Thank you! April 20, 2025 at 5:26 PM, Mohammad Amir : @Nagy Tamás FA @FA Please check C1STKC71_C02 Load Oversize error. Thank you! April 20, 2025 at 6:08 PM, VK (mcs) : @FA Good evening Please check Cathode pre-STK C71 Load oversize error! April 20, 2025 at 6:11 PM, 김수민 : @VK (mcs) Can you please tell me where MA6112 is? April 20, 2025 at 6:14 PM, VK (mcs) : MGZ MA6112 on the carrier MLA1155 C1STKA72 ( 0205201) April 20, 2025 at 6:14 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13+3 Overtime (3):Boromisza Zoltán, Csanálosi Gábor, Szűcs Géza Sick (0):- Holiday (0): Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs, Assembly(7): GF: Novák Károly, Kasztel Balázs, Kovács Szabolcs, Csanálosi gábor 1F: Novák Zoltán, Zsurbej Zsolt, Nagy Zsolt Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Boromisza Zoltán April 20, 2025 at 6:21 PM, 김수민 : @fa Plz check An vd C1CNV071-CV02-MCP#2 April 20, 2025 at 6:26 PM, Csanálosi Gábor FA : @VK (mcs) pls reset the alarm for an agv in mcs, i see it red, but no errors there April 20, 2025 at 6:27 PM, VK (mcs) : Which area is it? April 20, 2025 at 6:27 PM, Csanálosi Gábor FA : Gf AN AGV April 20, 2025 at 6:32 PM, 김수민 : Please check the alarm has occurred again April 20, 2025 at 6:39 PM, 조범희 : ST 6L#20 AGV8 Please check alarm April 20, 2025 at 7:03 PM, Csanálosi Gábor FA : Still red in MCS without error, and we cannot see the errors if they occurs. April 20, 2025 at 7:03 PM, VK (mcs) : @FA @Manufacturing Please check UNKDUP carriers: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) UNKDUP-MLC9234-250420072859A C2STKC72 shelf (0100404) And also please check Hold carriers: MLA2026 : C2STKA72 (0100104) MLA5165 : C2STKA72 (0200105) MGZ MAA041 is duplicated!! April 20, 2025 at 7:04 PM, VK (mcs) : There is no error right now, all are green April 20, 2025 at 7:06 PM, Csanálosi Gábor FA : Indeed no errors, but it is red to me in MCS LV Monitoring Assembly - GF. (yes, i did reload page several times.) April 20, 2025 at 7:08 PM, VK (mcs) : Please Log out and log in again, Probably it will back to normal April 20, 2025 at 7:08 PM, Csanálosi Gábor FA : Checking April 20, 2025 at 7:09 PM, Csanálosi Gábor FA : Nope, still red. :( April 20, 2025 at 7:40 PM, VK (mcs) : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) April 20, 2025 at 7:51 PM, Simon Dávid D SL NC : @VK (mcs) hello NC CA 5 sora nem jönnek reelek,megnéznéd mi az oka,köszönöm April 20, 2025 at 7:56 PM, VK (mcs) : Cathode reel STK C52 is OoS. April 20, 2025 at 7:56 PM, Simon Dávid D SL NC : Yes April 20, 2025 at 10:00 PM, Yulya Kirsanova : Hello. Agv#9 stopped with error near Staсking Line 6/20 Please check @fa Thank you so much. April 20, 2025 at 10:00 PM, Dániel Hufnágel : Just a moment please April 20, 2025 at 10:17 PM, Ivan Chobitko : @fa Please check AGV9 It’s stuck front of line 6 ST And stopped traffic April 20, 2025 at 11:47 PM, Simon Dávid D SL NC : @VK (mcs) hello VD AN 6-8 kemenéből kikelene pakolni AGV-vel egy másik kemencébe.A kemence hibás,köszönöm April 20, 2025 at 11:49 PM, VK (mcs) : @Dariimaa/다리마/Ivancsa Please check it out. Thx April 21, 2025 at 12:07 AM April 21, 2025 at 12:07 AM, Simon Dávid D SL NC : @VK (mcs) hello CA NC 5 sora nincs reel,megnéznéd az okát ,köszönöm April 21, 2025 at 12:10 AM, VK (mcs) : @FA Please check Cathode reel STK C52 Inactive stop April 21, 2025 at 12:13 AM, Simon Dávid D SL NC : @FA hello NC CA 52 raktár error megnéznétek,köszönöm April 21, 2025 at 12:14 AM, Csanálosi Gábor FA : Megyünk April 21, 2025 at 12:29 AM, Simon Dávid D SL NC : @VK (mcs) hello szükségünk lenne 5 sori reel.köszönöm April 21, 2025 at 12:30 AM, Dániel Hufnágel : Egy pillanatot kérünk baj van a raktárral és csak kívülről tudjuk megközelíteni April 21, 2025 at 12:31 AM, Simon Dávid D SL NC : @FA VD AN #5 AGV error,megnéznétek köszönöm April 21, 2025 at 12:31 AM, Csanálosi Gábor FA : Megyünk April 21, 2025 at 12:37 AM, Csanálosi Gábor FA : Kész April 21, 2025 at 12:57 AM, Simon Dávid D SL NC : @FA hello NC CA 6/1 #3 AGV beboritota a gépbe az üres mgz megnéznétek köszönöm April 21, 2025 at 1:03 AM, Simon Dávid D SL NC : @VK (mcs) hello nincs reel 5 és 6 sora.kellene SOS.köszönöm April 21, 2025 at 1:04 AM, VK (mcs) : Since STK was in alarm there were many orders, I will change some priorities. April 21, 2025 at 1:05 AM, 김수민 : Please give priority to GF CA reels. April 21, 2025 at 1:17 AM, VK (mcs) : It will be normal after a few minutes. Thx April 21, 2025 at 1:29 AM, 김수민 : @fa Plz check stk L5 agv#2 April 21, 2025 at 2:20 AM, Simon Dávid D SL NC : @VK (mcs) hello, line 5 still has very few reels, please change this, thank you April 21, 2025 at 2:22 AM, VK (mcs) : Jobs just initiated 2 minutes ago. But I will change priority. April 21, 2025 at 2:25 AM, Simon Dávid D SL NC : Thanks April 21, 2025 at 2:41 AM, VK (mcs) : @FA Please check Cathode reel STK C52 Load oversize error! April 21, 2025 at 2:44 AM, Szücs Géza FT-B : on üy way April 21, 2025 at 2:44 AM, Szücs Géza FT-B : my* April 21, 2025 at 2:56 AM, Szücs Géza FT-B : done April 21, 2025 at 4:32 AM, VK (mcs) : @FA Please check Cathode reel STK C51 Ready off during forking! April 21, 2025 at 4:51 AM, 카스텔 발라지 F.A. : Solved April 21, 2025 at 5:06 AM, Simon Dávid D SL NC : @VK (mcs) hello I would like a 6-line reel, thank you April 21, 2025 at 5:09 AM, VK (mcs) : @FA Please check Cathode reel STK C51 port 2 (9049) LTC0724 is not moving April 21, 2025 at 5:14 AM, VK (mcs) : Please wait, there is an issue in STK output port April 21, 2025 at 5:15 AM, 카스텔 발라지 F.A. : Solved April 21, 2025 at 5:29 AM, Simon Dávid D SL NC : @FA hello a #4 AGV error ,megnéznétek köszönöm April 21, 2025 at 5:34 AM, Simon Dávid D SL NC : NC CA #4 AGV error az összes AGV-t feltartja,megnéznétek köszönöm April 21, 2025 at 7:58 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 210 - Anode: 196 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 84 - Anode: 148 Thank you! April 21, 2025 at 8:23 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) April 21, 2025 at 8:38 AM, P.Bence A SSL : L6 stacking Agv 1 stop please check . April 21, 2025 at 9:49 AM, Sazzad Bhai SKon : @FA @카스텔 발라지 F.A. Could you please check LTA0193 at C1STKA71 (0204601). This is reel tray name but stored at VD STK. So please manually rack it out and restock, thank you 🙏 April 21, 2025 at 9:58 AM, Sazzad Bhai SKon : Due to this issue original ID was duplicated as UNKDUP-LTA0193-20250420185132384 (E0STKA51, 0201906) Please check this carrier also. Thank you April 21, 2025 at 10:35 AM, Nguyên : NC GF CA All AGVs are faulty please come check for me April 21, 2025 at 10:43 AM, Zaya/ivancsa FA : solved April 21, 2025 at 11:40 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 192 - Anode: 190 VD Pre STK > VD - Cathode: 01 - Anode: 02 VD Post STK > Stacking - Cathode: 82 - Anode: 150 Thank you! April 21, 2025 at 11:53 AM, duzzaman Md (MCS) : @MES Please check C1STKC71_M01 C002 An error has occured in MES Thank you April 21, 2025 at 12:25 PM, Dariimaa/다리마/Ivancsa : @mcs hello NC AN Robot#1 C0PVA010_P12 MA3143 not moved for a long time. Please check. Thank you! April 21, 2025 at 12:32 PM, duzzaman Md (MCS) : As we see, there is no job currently for this carrier. As soon as there will be LR from the nothing machines, jobs will be created. Thanks April 21, 2025 at 12:33 PM, Dariimaa/다리마/Ivancsa : Okey. Thank you April 21, 2025 at 2:16 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 195 - Anode: 194 VD Pre STK > VD - Cathode: 03 - Anode: 01 VD Post STK > Stacking - Cathode: 84 - Anode: 152 Thank you! April 21, 2025 at 3:09 PM, Nguyên : CA NC GF reel out very slow please check stock help me April 21, 2025 at 3:13 PM, duzzaman Md (MCS) : Job order is okay. There are jobs. But E0STKC51 is in error state. That's why it has been slow. It will be normalised as soon as the STK comes to service. Thank you April 21, 2025 at 3:17 PM, 안종수 : Ok! But Please give priority to GF CA reels. Thank you 😊 April 21, 2025 at 4:40 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 190 - Anode: 191 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 86 - Anode: 150 Thank you! April 21, 2025 at 5:10 PM, Nguyên : @P.Bence A SSL April 21, 2025 at 5:10 PM, Nguyên : @P.Bence A SSL April 21, 2025 at 5:11 PM, Barta Rudi : Our cathode reels are running low, and we haven’t received any new shipments lately. Could someone please check what the issue might be? April 21, 2025 at 5:51 PM, Andrea Zentay : GF Notching (An) ROBOT#2 COPVA020 F455 Detect Seonsor Off Error F2222 Pkate Sensor Error Please check it. April 21, 2025 at 6:06 PM, 김수민 : @mcs Plz Updated GF CA REEL quantity available April 21, 2025 at 6:08 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 양극 릴창고 크레인 하나 멈췄습니다. 확인 부탁드립니다. 양극 노칭 5,6 릴 공급지연으로 20분뒤에 전체설비 정지예정입니다. April 21, 2025 at 6:09 PM, Shahbaz 샤바즈 MCS/RTD : Available Reel for NC 5/6 Anode : 399 Cathode: 297 April 21, 2025 at 6:12 PM, 김수민 : Please give priority to GF CA reels. April 21, 2025 at 6:13 PM, Shahbaz 샤바즈 MCS/RTD : The issue is the carne going OOS frequently April 21, 2025 at 6:14 PM, Szücs Géza FT-B : Vendor working on it I received this information. April 21, 2025 at 6:15 PM, Yon Ko/연커/ : GF NC AN ROBOT#2 COPVA020 [F455]Detect Seonsor Off Error-(17:36) [F2222] Plate Sensor Error-(17:34) check it please. April 21, 2025 at 6:29 PM, 김수민 : 자동화물류 릴창고 양극 릴 공급지연 설비정지 6/2 17:00~ 6/3 17:18~ April 21, 2025 at 6:32 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 8+5/12 Tech, 1Sl Overtime(5): Szabadi Miklós, Harasztia Zoltán, Gégény Dávid, Zsurbej Zsolt Holiday(2): Böröcz Tamás, Rácz Dániel Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Szabadi Miklós - Powder CA AGV(1): Kertész Kornél Dániel --------------- Assy GF (3): Csanálosi Gábor, Gégény Dávid, Zsurbej Zsolt --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Form April 21, 2025 at 6:59 PM, 방혁 PM(Bang.Hyuk) FA : 정상 공급 시작했습니다 April 21, 2025 at 7:16 PM, 김수민 : 양극 RTV 컨베이어 멈춰있습니다. 확인부탁드립니다 April 21, 2025 at 7:18 PM, 김지수PM(Gyuri)_FA : 지금 가고있습니다 April 21, 2025 at 7:35 PM, 김수민 : 양극 1번 릴창고 크레인 2개다 멈춰있습니다. 확인부탁드립니다 April 21, 2025 at 7:36 PM, 김수민 : AN VD 크레인 에러로 멈춰있습니다. 확인부탁드립니다 April 21, 2025 at 7:53 PM, 김지수PM(Gyuri)_FA : 업체에서 점검중에 있습니다 April 21, 2025 at 7:58 PM, 김수민 : PLZ CHECK AN NC ROBOT#1 Empty magazine plate does not move April 21, 2025 at 8:05 PM, Csanálosi Gábor FA : Done April 21, 2025 at 8:49 PM, M.Ferenc "B"Nc/Vd SL : @MCS GF NC Ca side stopped because no reel is coming from the warehouse. Please check. April 21, 2025 at 8:52 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please Check Cathode reel RTV E0CNVC52_RTV01 Thanks April 21, 2025 at 9:03 PM, Csanálosi Gábor FA : No errors, but the conveyor filled with reels on both directon. There was some maintenance on c51-c52, thats why many jobs is there, so thats why the delay. April 21, 2025 at 9:05 PM, Csanálosi Gábor FA : Maybe you can play with priorities April 21, 2025 at 9:10 PM, Shahbaz 샤바즈 MCS/RTD : Currently all the jobs are towards buffer and manual ports but still RTV is not transferring, is RTV occupied? April 21, 2025 at 9:11 PM, Csanálosi Gábor FA : According to ccs it isnt. I go back there then to check April 21, 2025 at 9:18 PM, Shahbaz 샤바즈 MCS/RTD : In MCS the destination of LTC0537 is BP05 but in CCS it’s CNVC52_P01. I think that’s why it is not moving. April 21, 2025 at 9:21 PM, Csanálosi Gábor FA : 0537 were on port 9012, i deleted the current jobs for it and made a manual job to put to buffer April 21, 2025 at 9:23 PM, Shahbaz 샤바즈 MCS/RTD : Next reel has same issue. April 21, 2025 at 9:25 PM, Csanálosi Gábor FA : As i see, the system trying to send thise reels back to stk, but the conveyor is still full with empty trays. So until the C51 doesnt clear the in conveyor, it will stuck. April 21, 2025 at 9:26 PM, Shahbaz 샤바즈 MCS/RTD : If you transfer LTC0855 then the next carriers destination are buffer and manual ports in SCS as well. April 21, 2025 at 9:26 PM, Csanálosi Gábor FA : So you can change C51 transfers priority to free the rtv April 21, 2025 at 9:28 PM, Csanálosi Gábor FA : In progress April 21, 2025 at 9:59 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check the Ca Stk C51 cranes. Thank you. April 21, 2025 at 11:44 PM, Debreczeni Ármin : Hello! Please share lot quantity thank you! April 21, 2025 at 11:47 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 236 - Anode: 216 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 77 - Anode: 140 NC Reels: - Cathode: 322 - Anode: 371 April 22, 2025 at 12:07 AM April 22, 2025 at 12:07 AM, 김수민 : @fa Plz check an nc plate sensor error April 22, 2025 at 12:07 AM, 김수민 : Robot#1 April 22, 2025 at 12:29 AM, Csanálosi Gábor FA : Done April 22, 2025 at 2:15 AM, 방혁 PM(Bang.Hyuk) FA : @김수민 GF 양극 릴공급 괜찮나요? April 22, 2025 at 2:34 AM, 김수민 : 아직 비가동 호기 있어서 GF 우선순위로 출고 부탁드립니다 April 22, 2025 at 2:34 AM, 방혁 PM(Bang.Hyuk) FA : 비가동 시간 공유 부탁드립니다 April 22, 2025 at 3:16 AM, 김수민 : 5/1 18:46~20:48, 21:40~23:10 5/2 19:23~20:48, 21:30~23:10 5/3 18:42~18:57, 19:13~20:50, 21:18~23:15 6/1 20:45~20:55, 21:36~00:35 6/2 17:00~20:50, 21:55~22:45 6/3 17:18~20:47, 21:15~22:48 April 22, 2025 at 3:30 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 설비에서 LR계속 올라오고 있나요? April 22, 2025 at 3:36 AM, 방혁 PM(Bang.Hyuk) FA : 5/6 , 5-1 2:46 6-1 2:04 April 22, 2025 at 3:36 AM, 방혁 PM(Bang.Hyuk) FA : 이 마지막으로 보입니다 April 22, 2025 at 3:37 AM, 방혁 PM(Bang.Hyuk) FA : 설비는 11:31pm 이후로 전부 정상가동중인데 April 22, 2025 at 3:38 AM, 방혁 PM(Bang.Hyuk) FA : 상위 명령 확인해보겠습니다 April 22, 2025 at 3:41 AM, 방혁 PM(Bang.Hyuk) FA : 상위 MCS/RTD명령은 정상 처리되고있는걸로 보입니다. April 22, 2025 at 3:41 AM, 방혁 PM(Bang.Hyuk) FA : 부족한 릴들은 LR처리되서 나올겁니담 April 22, 2025 at 3:53 AM, 김수민 : 넵 확인 감사합니다 April 22, 2025 at 4:04 AM, 김수민 : Plz recheck April 22, 2025 at 4:09 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 258 - Anode: 225 VD Pre STK > VD - Cathode: 01 - Anode: 0 VD Post STK > Stacking - Cathode: 45 - Anode: 134 NC Reels: - Cathode: 318 - Anode: 365 April 22, 2025 at 5:06 AM, 김수민 : @Shahbaz 샤바즈 MCS/RTD Please manually release it to the port E0STKC51_M01,3,4,5,6,8 - LTC1273 1339 1891 0080 0703 1905 1533 1289 1042 0237 0257 1381 1243 April 22, 2025 at 5:10 AM, Shahbaz 샤바즈 MCS/RTD : Okay, I create a transfer command. April 22, 2025 at 5:26 AM, 김수민 : @fa Plz check CA EOSTKC51-M02 PORT - Empty trays do not go into storage April 22, 2025 at 5:27 AM, Csanálosi Gábor FA : LTC0408? April 22, 2025 at 5:28 AM, 김수민 : 0551 April 22, 2025 at 5:29 AM, Csanálosi Gábor FA : Coming April 22, 2025 at 5:45 AM, M.Ferenc "B"Nc/Vd SL : @FA Anode Nc AGV#4 stopped near 6/2 machine. Plaese check it. April 22, 2025 at 5:47 AM, Ynja/ivancsa FA : solved April 22, 2025 at 6:03 AM, Mohammad Amir : Sir, All requested materials have been transferred. ✅ Thank you very much! April 22, 2025 at 6:42 AM, Mohammad Amir : @FA Please check C1STKC71_P15/16 there is Light curtain error and it is blocking materials delivery to 5-6 VD CA. Thank you very much! April 22, 2025 at 6:45 AM, Nguyên : GF CA NC reel out very slow.maybe not enough material for us to produce please check back with me April 22, 2025 at 6:45 AM, Mohammad Amir : Checking April 22, 2025 at 6:50 AM, Mohammad Amir : There are 293 available reels for Line-5/6. Currently one reel on the way. ✅ There is one issue which is slowing down the reels CA NC speed ,I am solving it. Thank you very much! April 22, 2025 at 6:53 AM, Mohammad Amir : Issue has been resolved ✅. 4 CA Reels on the way. Thank you very much! April 22, 2025 at 6:57 AM, 전 운 (Jeon Woon) : Where are GF NC SL? Please Come to V/D CA 1-4 Front April 22, 2025 at 7:10 AM, 안종수 : @Mohammad Amir Please manually release it to the port E0STKC51_M01,3,4,5,6,8 - LTC0627 0650 1208 0260 1376 1611 1471 0793 1805 1475 April 22, 2025 at 7:10 AM, Mohammad Amir : Good morning Sir, Working on it! April 22, 2025 at 7:11 AM, 안종수 : Thank you 😊 April 22, 2025 at 7:12 AM, Mohammad Amir : You are welcome! April 22, 2025 at 7:16 AM, 안종수 : GF NC CA Reel standby quantity is insufficient. NC facilities can stop. Please give priority to GF CA reels. Thank you April 22, 2025 at 7:17 AM, Mohammad Amir : Sure,sir I am increasing priority for NC CA reels delivery. Thank you very much! April 22, 2025 at 7:21 AM, Mohammad Amir : I have increased the priority for NC CA reels successfully ✅. I am monitoring the process . Thank you! April 22, 2025 at 7:24 AM, 안종수 : Thank you very much 😊 April 22, 2025 at 7:24 AM, Mohammad Amir : You are welcome! April 22, 2025 at 7:28 AM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD AN 6-10 chamber only has 2 materials. Please check Thank you! April 22, 2025 at 7:28 AM, Mohammad Amir : Checking April 22, 2025 at 7:29 AM, Mohammad Amir : Good morning, There is an active LR at 7:24 for remaining two chambers ,however there is no material available that's why job is not getting created . As soon as material will be available job will be created. Thank you very much! April 22, 2025 at 7:32 AM, Mohammad Amir : Sir, I have successfully transferred all the requested materials. ✅ Thank you! April 22, 2025 at 8:07 AM, Nguyên : NC GF CA reel is still very slow. can you help me fix it? April 22, 2025 at 8:12 AM, Mohammad Amir : There are a lot of transfer commands exist from the STKC51 and 52 that's why you are witnessing delay now. I already gave priority to NC CA reels. I am monitoring. Thank you very much! April 22, 2025 at 8:14 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC71_C01 there is Fork#1 Load Position Error when Active. Thank you! April 22, 2025 at 8:32 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) April 22, 2025 at 9:38 AM, Mohammad Amir : Sir, CA NC reels delivery seems to be okay now,should I keep increasing priority for CA NC? Thank you very much! April 22, 2025 at 9:41 AM, 안종수 : Thank you for the confirmation. But still NC CA lacks Reel. I'll tell you when there are more waiting reels. Until then, I would appreciate it if you could give priority. April 22, 2025 at 9:42 AM, Mohammad Amir : Definitely Sir, I am going to keep giving priorities to NC CA reels untill your next instruction. Thank you very much! April 22, 2025 at 9:46 AM, Tumruu/투머르/IvancsaFA : GF VD CAT I need to give agv3. C5VDC040_p02 is not working. What should I do? April 22, 2025 at 9:48 AM, Mohammad Amir : It is currently OOS in MCS/RTD. @FA @Nagy Tibor Is there any maintenance going on 5-4 VD CA? Thank you very much! April 22, 2025 at 9:48 AM, Mohammad Amir : @Tumruu/투머르/IvancsaFA This is the reason why AGV is not able to unload. Thank you very much! April 22, 2025 at 9:51 AM, P.Bence A SSL : L6 stacking Agv 2 stop please check thank you April 22, 2025 at 10:04 AM, Mohammad Amir : @Manufacturing Please press LR for remaining half chamber P01 and P02 for 5-6 VD CA as last assigned jobs were terminated at 8:19 and as a result now there is a half chamber situation. Thank you very much! April 22, 2025 at 10:36 AM, 안종수 : @Mohammad Amir Please manually release it to the port E0STKC51_M01~8 - LTC0695 0738 1394 1071 0476 1945 1012 0223 Thank you April 22, 2025 at 10:36 AM, Mohammad Amir : Sure Sir, Working on it! April 22, 2025 at 10:40 AM, Mohammad Amir : Sir, I have released all the requested materials. ✅ Thank you very much! April 22, 2025 at 10:44 AM, 안종수 : Thank you 😊 April 22, 2025 at 10:45 AM, Mohammad Amir : You are welcome! April 22, 2025 at 10:54 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check is there any maintenance going on E0CNVA52_RTV01,cause it is in Manual mode hence OOS and reels delivery has stopped. Thank you very much! April 22, 2025 at 11:00 AM, 안종수 : @FA Please check the NC CA #4 AGV April 22, 2025 at 11:06 AM, Mohammad Amir : @FA This issue exists since 10:42 , please check it out ,there will be shortages of Anode reels. Thank you very much! April 22, 2025 at 11:07 AM, Mohammad Amir : @Manufacturing Please check this issue. Thank you very much! April 22, 2025 at 11:11 AM, Novák Károly F. A. : Checking April 22, 2025 at 11:11 AM, Mohammad Amir : For you information, This issue has been fixed now ✅. Thank you very much! April 22, 2025 at 11:14 AM, Novák Károly F. A. : Korean technicians repaired it. They are now on the ca page. April 22, 2025 at 11:14 AM, Mohammad Amir : Thank you very much for the update! April 22, 2025 at 11:16 AM, Mohammad Amir : Sir, There might be some delay in CA NC reels delivery as now I received information that Korean technicians are working on E0CNVC52. I am monitoring and giving priorities to CA NC reels. Thank you very much! April 22, 2025 at 11:32 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKC51_C01 there is Crane Distance Error. It is blocking reels delivery. Thank you very much! April 22, 2025 at 11:42 AM, Mohammad Amir : @FA Please check this error on priority it exists since 11:26 . Because of this now there is lack of NC CA reels. Thank you very much! April 22, 2025 at 11:48 AM, Nguyên : E0STKC51_C01 currently having errors please check for me April 22, 2025 at 11:48 AM, Nguyên : CA NC GF April 22, 2025 at 12:01 PM, Koncz Tamás : Done April 22, 2025 at 12:01 PM, Novák Károly F. A. : Solved! April 22, 2025 at 12:12 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 12:14 PM, Mohammad Amir : Sir, Now every issue has been resolved and CA reels delivery has been normalized ✅. I am keep increasing priority for CA NC reels. Thank you very much! April 22, 2025 at 12:16 PM, 안종수 : Thank you April 22, 2025 at 12:17 PM, Mohammad Amir : You are welcome Sir! April 22, 2025 at 12:17 PM, P.Bence A SSL : @Mohammad Amir The operation of the GF Cathode reel warehouse is very slow, the machines cannot work continuously and the lines stop later. Is there any particular reason why the warehouse is so slow??! April 22, 2025 at 12:19 PM, Mohammad Amir : Hello, There were issues with CNVC52 and STKC51 that's why it was delay in reels CA delivery. However now everything is fine,I am monitoring. I am giving priorities to CA NC Reel so that production will continue. Thank you very much! April 22, 2025 at 12:20 PM, adambenczik left this chatroom. April 22, 2025 at 12:58 PM, Mohammad Amir : @Manufacturing Please check this issue,it still exists. Thank you very much! April 22, 2025 at 12:59 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_16_080 there is data loss error and it is blocking stacking materials delivery. Thank you! April 22, 2025 at 1:01 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKC51_C02 there is Fork#1 Load Position Error when Active. It is blocking reels delivery. Thank you! April 22, 2025 at 1:04 PM, Novák Károly F. A. : Checking April 22, 2025 at 1:04 PM, Novák Károly F. A. : Checking April 22, 2025 at 1:05 PM, Mohammad Amir : @Novák Károly F. A. This issue has been resolved ✅. Please check E0STKC51_C02. Thank you very much! April 22, 2025 at 1:05 PM, Novák Károly F. A. : This message was deleted. April 22, 2025 at 1:05 PM, Novák Károly F. A. : Solved April 22, 2025 at 1:05 PM, Mohammad Amir : Thank you very much 🙏 April 22, 2025 at 1:17 PM, Novák Károly F. A. : Solved April 22, 2025 at 1:18 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 1:22 PM, Mohammad Amir : Could you please check again E0STKC52_C02 now there is Travel Driver error. Thank you! April 22, 2025 at 1:28 PM, Novák Károly F. A. : Unfortunately, this is an ongoing problem. Checking April 22, 2025 at 1:29 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 1:34 PM, Novák Károly F. A. : Korean technicians are already inspecting the crane. They are working to resolve the issue. April 22, 2025 at 1:41 PM, Mohammad Amir : Okay, Thank you very much for the information! April 22, 2025 at 1:53 PM, Barta Rudi : Cathode VD Agv 9 stop please check thank you April 22, 2025 at 2:03 PM, Barta Rudi : @FA April 22, 2025 at 2:26 PM, Imre : Állítgatják,javîtják az AGV-ket!!!! April 22, 2025 at 3:44 PM, Mohammad Amir : @FA Please check E0STKC51 _C01 there is ready off during Forking error and because of this reels delivery are getting affected. Thank you! April 22, 2025 at 3:46 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC72_C01 there is travel first movement error. Thank you! April 22, 2025 at 3:46 PM, Novák Károly F. A. : Checking April 22, 2025 at 3:47 PM, Mohammad Amir : C02*** April 22, 2025 at 3:51 PM, Novák Károly F. A. : Solved April 22, 2025 at 3:52 PM, Mohammad Amir : Thank you very much! April 22, 2025 at 3:52 PM, Mohammad Amir : @Novák Károly F. A. Could you please check this error because of this CA reels supply is getting disrupted. Thank you! April 22, 2025 at 3:58 PM, Novák Károly F. A. : The issue is currently being resolved. Korean technicians are working on it. April 22, 2025 at 4:02 PM, Novák Károly F. A. : Both warehouses are working again. c51 and c52. April 22, 2025 at 4:03 PM, Mohammad Amir : Thank you very much for the information! April 22, 2025 at 4:26 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC52_C01 there is Hoist Time over error. Thank you! April 22, 2025 at 4:33 PM, Novák Károly F. A. : Korean technicians are constantly checking the crane and repairing any faults that arise. They are trying to find the causes of the faults. April 22, 2025 at 4:34 PM, Mohammad Amir : Okay thank you very much! April 22, 2025 at 5:15 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 240 - Anode: 224 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 21 - Anode: 122 April 22, 2025 at 5:56 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKC71_C02 there is Port interface Error. Thank you April 22, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 9+3/12 Tech, 1Sl Overtime(3): Hufnágel Dániel, Kasztel Balázs, Novák Zoltán Holiday(1): Czeilinger Krisztián Sick(2): Kovács Ágnes, Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Pintye Miklós, Novák Zoltán --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Kasztel Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikuso April 22, 2025 at 6:30 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 22 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 22, 2025 at 6:49 PM, 이한웅(삼구) : Please Check NC Ca 6-3 In C/V April 22, 2025 at 7:06 PM, KIM SEYEON [김세연]_FA : @이영혁 paul 부장님 4라인 스택 포트 매칭 완료되면 본 카톡방 공유 부탁드립니다. April 22, 2025 at 7:12 PM, Csanálosi Gábor FA : Done April 22, 2025 at 7:38 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CA reel CNVC52 RTV errors. Thank you. April 22, 2025 at 7:42 PM, 이영혁 paul : 스택4라인 p03,p04 매칭되었습니다 April 22, 2025 at 7:43 PM, KIM SEYEON [김세연]_FA : 감사합니다 April 22, 2025 at 8:29 PM, Lan Nhi : @ FA plz check for me. Agv #6 error April 22, 2025 at 8:29 PM, Lan Nhi : Nc 4/1 An April 22, 2025 at 8:39 PM, Lan Nhi : @ MCS check for me machine 5-2(#38) the machine only has 2 pallets, thanks April 22, 2025 at 8:46 PM, Shahbaz 샤바즈 MCS/RTD : @FA The job was created long ago from VD Ca 5-2 with plates MLC0013 and MLC2237, MLC0013 moved to P15 while MLC2237 shows “Dest port : Load complete On” so still in the stocker. Please check Thank you April 22, 2025 at 8:53 PM, Lan Nhi : Yes. Thank you April 22, 2025 at 9:02 PM, Jun(정우준)_SKOH FA : it's working now. April 22, 2025 at 10:08 PM, Jun(정우준)_SKOH FA : @Shahbaz 샤바즈 MCS/RTD Could you please check why there are no available magazines for GF ST CA ports 3 and 4? April 22, 2025 at 10:09 PM, Debreczeni Ármin : Hello! Can you share lot quantity? Thank you April 22, 2025 at 10:09 PM, Jun(정우준)_SKOH FA : C1CNV072_P03, P04 April 22, 2025 at 10:11 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 227 - Anode: 220 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 30 - Anode: 128 April 22, 2025 at 10:19 PM, Jun(정우준)_SKOH FA : @Shahbaz 샤바즈 MCS/RTD now i know why. thank you so much. April 22, 2025 at 10:56 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA 4라인 ST 양산 WO 적용했습니다. April 22, 2025 at 10:56 PM, Jun(정우준)_SKOH FA : 네, 자재 반송 확인했습니다. April 22, 2025 at 10:59 PM, 이한웅(삼구) : 감사합니다. April 22, 2025 at 11:13 PM, Lan Nhi : @ MCS. plz check machine 4-3(#30) error. thank you April 22, 2025 at 11:13 PM, Lan Nhi : Vd.Ca April 22, 2025 at 11:16 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check VD CA 4-3, it’s OOS. Thank you April 22, 2025 at 11:18 PM, Lan Nhi : Thank you April 22, 2025 at 11:25 PM, Jun(정우준)_SKOH FA : @Shahbaz 샤바즈 MCS/RTD can you cancel All Load request at ST 4line?? because of 5,6Line LR,UR are delayed. April 22, 2025 at 11:31 PM, Shahbaz 샤바즈 MCS/RTD : What about the current jobs? So, is there no need for material at Line 4? April 22, 2025 at 11:31 PM, Jun(정우준)_SKOH FA : except current jobs. April 22, 2025 at 11:33 PM, Jun(정우준)_SKOH FA : we have to fill it out until tomorrow at 6 am. after that, they will start production. April 22, 2025 at 11:34 PM, Shahbaz 샤바즈 MCS/RTD : Ok, then I will remove the remaining LRs, please LR again later when needed. Thank you April 22, 2025 at 11:35 PM, Jun(정우준)_SKOH FA : perfect, thank you. April 22, 2025 at 11:39 PM, Shahbaz 샤바즈 MCS/RTD : Done, except for those having transfers. April 23, 2025 at 12:38 AM April 23, 2025 at 12:38 AM, Lan Nhi : @FA Please check VD CA 6-6, OOS. Thank you April 23, 2025 at 12:53 AM, Yosyp Tovt : Hello on lines 5 and 6, ST. cathode delay material thank you April 23, 2025 at 1:05 AM, Lan Nhi : @FA plz. Nc. An 4/3 agv number 4 error April 23, 2025 at 1:06 AM, Debreczeni Ármin : Somebody can check this problem please April 23, 2025 at 1:09 AM, Jun(정우준)_SKOH FA : because of LR for 4line. April 23, 2025 at 1:09 AM, Debreczeni Ármin : Thanks April 23, 2025 at 1:10 AM, Jun(정우준)_SKOH FA : from at this time. April 23, 2025 at 1:11 AM, 이한웅(삼구) : Please check NC Ca #1 Robot April 23, 2025 at 1:13 AM, Jun(정우준)_SKOH FA : please reset 4line Load requests. April 23, 2025 at 1:18 AM, Csanálosi Gábor FA : Solved April 23, 2025 at 2:31 AM, Jun(정우준)_SKOH FA : @Debreczeni Ármin now you can load request for 4Line. thank you. April 23, 2025 at 2:37 AM, Lan Nhi : @FA plz check agv #6 error Nc. An 4/1. Thank you April 23, 2025 at 2:41 AM, Debreczeni Ármin : Thank you April 23, 2025 at 3:32 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA NC An 4-2 Out C/V 버퍼 측 벨트 이탈했습니다. April 23, 2025 at 3:32 AM, Jun(정우준)_SKOH FA : 확인해보겠습니다. April 23, 2025 at 4:09 AM, Debreczeni Ármin : @Szücs Géza FT-B Szia! A mai naptól a GFen 3 sor fog üzemelni. Ahogy néztem amikor feltöltöttük az L4et a többi sorra majdnem nem jutott anyag pedig még nem is gyárt. Annyit szeretnék kérni hogy valamilyen módon jelezzetek a felettesek felé hogy az anyag ellátásunk nehézkes lesz így a sorokra, vagy az AGV kevés vagy a daruk lassúak. Köszönöm April 23, 2025 at 4:11 AM, Szücs Géza FT-B : Rendben, beteszem a mai riportba April 23, 2025 at 4:13 AM, Debreczeni Ármin : Köszönöm April 23, 2025 at 4:17 AM, Szücs Géza FT-B : maga a CA ST terhelt. hiszen az emeleten van AN oldalon a 10es sor ellátására 10 AGV, és van CA oldalon a 9esnek is 10 AGV. ezzel szemben a GF ST-n minden sor CA oldalon van, és ugyan úgy 10 AGV van, csak nem 1, hanem most már 3 sorra. Jelzem. April 23, 2025 at 4:18 AM, Debreczeni Ármin : Igen ez jogos igazad van. Csak nem árt ha tudnak róla a big bossok (thumbsup) April 23, 2025 at 4:25 AM, Dániel Hufnágel : @Debreczeni Ármin Jó reggelt! Nekünk erről már jött hivatalos e-mail miszerint az FA kapacitása nem elegendő stacking 100% kihasználtsága esetén, sajnos ez mindösszesen 85% lett tervezve! És egy le ürülés, vagy jelen esetben egy 0-ról való feltöltés termelés kieséssel jár. Emiatt kis türelmet és megértést kérünk, egyenlőre mi próbáljuk, teljes mértékben orvosolni a fennálló hibák, amennyiben a mi kapacitásunk is engedi! Köszönöm! April 23, 2025 at 4:25 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check An reel warehouses A51/A52 “Port interface error” Thank you April 23, 2025 at 4:25 AM, Debreczeni Ármin : Szia! Köszönöm szépen az infot! April 23, 2025 at 4:31 AM, Dániel Hufnágel : Igazán nincs mit! April 23, 2025 at 5:04 AM, Debreczeni Ármin : Can you send new quantity? April 23, 2025 at 5:06 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 209 - Anode: 191 VD Pre STK > VD - Cathode: 01 - Anode: 02 VD Post STK > Stacking - Cathode: 21 - Anode: 109 April 23, 2025 at 5:09 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA 동일 현상 재발생했습니다. 확인 부탁드립니다. April 23, 2025 at 5:15 AM, Jun(정우준)_SKOH FA : 넵, 현장 보존 부탁드립니다. April 23, 2025 at 5:16 AM, N.Zoli F.A. : @Shahbaz 샤바즈 MCS/RTD Hello We need new material for assy Gf ca vd C4VDC080 P01/P02 port. Thank you in advance! April 23, 2025 at 5:19 AM, Shahbaz 샤바즈 MCS/RTD : Checking April 23, 2025 at 5:23 AM, Shahbaz 샤바즈 MCS/RTD : Please can you LR again. April 23, 2025 at 5:35 AM, 이한웅(삼구) : - NC An 4-3 AGV Full 매거진 취외 중 매거진 전도 발생으로 인한 불량 이력 공유 드립니다. @심재훈 @JUNG WOO PARK @KIM SEYEON [김세연]_FA MA2239(폐기) MA4051(폐기) MA1435(3/2 폐기) MA1575(폐기) MA1521(양호) MA2026(QC 확인 필요) April 23, 2025 at 5:36 AM, Shahbaz 샤바즈 MCS/RTD : LR received and Job created now. April 23, 2025 at 5:40 AM, N.Zoli F.A. : Thank you April 23, 2025 at 6:00 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 An 4-3 매거진 전도되면서 센서 고정 브라캣 휘었습니다 April 23, 2025 at 6:25 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 7 Tech, 1 SL Beteg: 4 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(1) Fabricius Gergő ———————————— Assembly GF(1) Kertész Dani ———————————— Formation/Modul(2) Döme György Harasztia Zoltán April 23, 2025 at 6:40 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKC51 _C02 there is travel driver error. Thank you! April 23, 2025 at 6:42 AM, Mohammad Amir : @FA @Kertész Dániel Also please check C1STKA72_P02 there is PIO TR off timer over error and it is slowing down Anode stacking materials delivery. Please check this one on priority. Thank you! April 23, 2025 at 6:45 AM, Kertész Dániel : Solved. April 23, 2025 at 6:46 AM, T. Gàbornè C SL NC : @MCS Please check CA #51 reel warehouse, no move reels. Thx April 23, 2025 at 6:48 AM, Mohammad Amir : There was an issue with the CA STK51 but now issue has been fixed and process has been normalized. ✅ Reels are on the way. I am monitoring. Thank you! April 23, 2025 at 7:04 AM, QuangPhan : Hello! Good morning! NC AN 4/3 AGV #3 error. Thanks April 23, 2025 at 7:21 AM, Mohammad Amir : This message was deleted. April 23, 2025 at 7:25 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 198 - Anode: 187 VD Pre STK > VD - Cathode: 03 - Anode: 05 VD Post STK > Stacking - Cathode: 21 - Anode: 94 April 23, 2025 at 7:34 AM, T. Gàbornè C SL NC : @Fa Please check CA side AGV #5 . Machine stop. Thx April 23, 2025 at 7:39 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 7 Tech, 1 SL Beteg: 4 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(2) Fabricius Gergő Kertész Dani ———————————— Assembly GF(0) ———————————— Formation/Modul(2) Döme György Harasztia Zoltán April 23, 2025 at 7:41 AM, 안종수 : Please check the NC AN #2 AGV April 23, 2025 at 8:03 AM, Mohammad Amir : @Fa Please check E0STKC52_C01 there is Fork#1 Sew emergency stop(code14). Thank you! April 23, 2025 at 8:19 AM, QuangPhan : Hello! @FA VD AN AGV #6 error. Thanks April 23, 2025 at 8:19 AM, Mohammad Amir : @FA Please check this error still exists. Thank you very much! April 23, 2025 at 8:22 AM, T. Gàbornè C SL NC : @Fa Please check VD CA AGV #7 machine no work. Thx April 23, 2025 at 8:25 AM, Yaroslav SL/C 6 line : Good morning everyone @fa AGV 8 stopped near 6 line ST #4. Please check April 23, 2025 at 8:26 AM, Mohammad Amir : @FA Please check this issue it still exists and because of this reels CA delivery has been stopped. Thank you! April 23, 2025 at 8:30 AM, Sazzad Bhai SKon : @FA Good morning. It is suspected that magazine ID MA3377 is duplicated in two plates. Plate 1: MLA2052 (C1STKA72, 0205706): MA3377, MA1429, MA3206, MA1395, MA3357 Plate 2: MLA0167 (C1STKA71, 0101202): MA3377, MA2268, MA1023, MA2105, MA3068, MA6456 please confirm their magazines from manual port rack out. Thank you April 23, 2025 at 8:30 AM, QuangPhan : Hello! @FA NC AN AGV #5 error. Thanks April 23, 2025 at 8:30 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) April 23, 2025 at 8:37 AM, T. Gàbornè C SL NC : @MCS Please check CA #51 reel warehouse, no move reels. Thx April 23, 2025 at 8:38 AM, QuangPhan : Hello! @FA Please check AGV empty MGZ loader for 4/3 AN. Almost out of empty Mgz because AGV is not delivering. thanks. April 23, 2025 at 8:38 AM, Mohammad Amir : There are jobs exists for reels CA delivery however STKC52 is OOS since 8:00 that's why CA reels are not reaching for production. I already informed the FA team about it several times. I will keep you updated. Thank you very much! April 23, 2025 at 8:38 AM, Mohammad Amir : @FA Please check this issue it still exists and because of this reels CA delivery has been stopped. Thank you! April 23, 2025 at 8:38 AM, Mohammad Amir : Checking April 23, 2025 at 8:40 AM, 안종수 : Please check the NC AN #3 AGV April 23, 2025 at 8:40 AM, Mohammad Amir : @ACS @FA Please check AGV#3 AN NC it is in error and it has blocked the delivery of empty magazine to 4-3 AN line as Assigned AGV#4 has been blocked by AGV#3. Thank you very much! April 23, 2025 at 8:43 AM, QuangPhan : Thank you April 23, 2025 at 8:43 AM, Mohammad Amir : You are welcome! April 23, 2025 at 8:46 AM, Mohammad Amir : @Jun(정우준)_SKOH FA Sir, could you please check this error it still exists, because of this error CA Reels delivery has stopped and production getting affected. Thank you very much! April 23, 2025 at 9:02 AM, Mohammad Amir : Issue has been resolved ✅. AGV#5 has delivered the Empty magazine to 4-3 AN NC and AGV#4 also waiting to deliver it. Thank you! April 23, 2025 at 9:27 AM, 안종수 : @FA NC CA All AGV 공회전 중입니다. 확인 바랍니다. April 23, 2025 at 9:31 AM, 안종수 : Please check the NC AN #4 AGV April 23, 2025 at 9:47 AM, Mohammad Amir : @FA Could you please check C1STKC71_P19/20 there is Light curtain error and it is blocking transfers to VD AN 4-1 half chamber. Thank you very much! April 23, 2025 at 9:54 AM, QuangPhan : Hello! @FA NC AN Robot #1 error. Thanks April 23, 2025 at 9:55 AM, T. Gàbornè C SL NC : @Fa Nem hozza az AGV a CA oldalra az üres mgz-at. Megnéznétek miért? April 23, 2025 at 9:57 AM, Mohammad Amir : Checking April 23, 2025 at 9:58 AM, Badamaa/Ivancsa FA : @mcs VD AN 4-9 chamber door is closed. Please cancel the job. Thank you April 23, 2025 at 9:59 AM, Mohammad Amir : @Badamaa/Ivancsa FA Please check NC CA AGV#2 it is not moving and has blocked all the AGVs and resulting there is lack of empty magazine in CA NC, please look it on priority. Thank you very much! April 23, 2025 at 10:00 AM, Mohammad Amir : Checking April 23, 2025 at 10:01 AM, Mohammad Amir : All jobs have been cancelled successfully ✅. Thank you very much! April 23, 2025 at 10:02 AM, Mohammad Amir : @T. Gàbornè C SL NC because of this issue you faced CA NC empty magazine delivery delay. Thank you! April 23, 2025 at 10:12 AM, Badamaa/Ivancsa FA : solved April 23, 2025 at 10:13 AM, T. Gàbornè C SL NC : @Mohammad Amir Ca 4 line waiting empty mgz, Please check. Thanks. April 23, 2025 at 10:15 AM, Mohammad Amir : Checking April 23, 2025 at 10:16 AM, Badamaa/Ivancsa FA : NOTCHING An Robot #1 detect seonsor off error pls check April 23, 2025 at 10:18 AM, Mohammad Amir : Issue has been resolved AGV#2 on the way for 4-1 ✅ Also Magazine on the way for 4-3. I am monitoring. Thank you very much! April 23, 2025 at 10:44 AM, 안종수 : Please check the NC AN #3 AGV April 23, 2025 at 10:48 AM, T. Gàbornè C SL NC : @MCS CA 5#2#3 machine wait empty mgz, please check. Thx April 23, 2025 at 10:48 AM, Mohammad Amir : Checking April 23, 2025 at 10:50 AM, Mohammad Amir : We received LR successfully from Both machine however there is currently no magazine available at the O/P ports of Gantry as soon as materials will arrive here ,jobs will be created. I am monitoring to make sure the process. Thank you very much! April 23, 2025 at 10:52 AM, QuangPhan : Hello! @FA NC AN Robot #1 error. Thanks April 23, 2025 at 10:53 AM, Mohammad Amir : Job has been created for 5-2 ,Empty magazine MC5470 on the way. ✅ Thank you! April 23, 2025 at 10:57 AM, Mohammad Amir : @FA Please check C1STKC71_C02 this crane has frozen without error and because of this there are carriers waiting on the Recovery CNV and Gantry. Thank you very much! April 23, 2025 at 10:58 AM, Mohammad Amir : @Fa Please check E0STKC51_C01 there is Fork#2 Sew emergency stop(code14). Thank you! April 23, 2025 at 11:01 AM, Koncz Tamás : Working on it April 23, 2025 at 11:02 AM, Mohammad Amir : Köszönom szepen 🙏 April 23, 2025 at 11:03 AM, 안종수 : Please check the NC AN #10 AGV April 23, 2025 at 11:14 AM, 안종수 : @이주봉PM LEE JUBONG(FA) PM님 음극 4-3 Out Port 쪽 node에서 모든 AGV Alarm 발생하고 있습니다. 확인 부탁드립니다 April 23, 2025 at 11:22 AM, 안종수 : Please check the NC AN #4 AGV April 23, 2025 at 11:35 AM, 안종수 : Please check the NC CA #1 ROBOT April 23, 2025 at 11:39 AM, Mohammad Amir : @FA Please check this crane still in idle state that's why there is a queue of materials on recovery CNV. Thank you very much n April 23, 2025 at 11:42 AM, T. Gàbornè C SL NC : @Fa Please check Ca NC Robot #1, message F760 Thx April 23, 2025 at 11:43 AM, F.A.briczius Gergő : I am going. April 23, 2025 at 12:02 PM, QuangPhan : Hello! @FA VD AN AGV #2 error. Thanks April 23, 2025 at 12:21 PM, Mohammad Amir : @F.A.briczius Gergő @Badamaa/Ivancsa FA Please check C1CNV072_16_079 there is Data mismatch error and because of this stacking materials delivery has been stopped. Please take action on priority there is lack of materials for stacking line-4 and 5. Thank you very much! April 23, 2025 at 12:24 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_P22 it is OOS since 11:25 and because of this there is a queue of materials on the recovery CNV. Thank you very much! April 23, 2025 at 12:28 PM, T. Gàbornè C SL NC : @MCS Please check CA reel Storage #51#52 ,no move reels. Thx April 23, 2025 at 12:28 PM, Mohammad Amir : Checking April 23, 2025 at 12:30 PM, Mohammad Amir : There is Job exists for transfer for CA reels. Should I increase priority for CA Reels? Is there shortage of Reels CA in production? Thank you! April 23, 2025 at 12:35 PM, Mohammad Amir : @FA Please check this issue urgently there will be shortages of stacking materials. Thank you very much! April 23, 2025 at 12:37 PM, T. Gàbornè C SL NC : I need more Ca Reel, our stock is low in NC area. April 23, 2025 at 12:38 PM, Mohammad Amir : Okay I am increasing priority for NC CA reels. Thank you very much! April 23, 2025 at 12:41 PM, T. Gàbornè C SL NC : @fa Please check CA NC 5#2 AGV no move full mgz. Thx April 23, 2025 at 12:46 PM, Mohammad Amir : I have increased the priority for CA Reels , however STKC51 is still OOS so you might face delay. However when STK will be normal you will receive the Reels firstly. I am monitoring! Thank you very much! April 23, 2025 at 12:49 PM, Yaroslav SL/C 6 line : @fa AGV6 stopped near ST#3 5 line. Please check. April 23, 2025 at 12:53 PM, Mohammad Amir : @FA This error still exists , please check it. Thank you! April 23, 2025 at 12:56 PM, Mohammad Amir : Reels CA have started to arrive ✅ Thank you very much! April 23, 2025 at 1:03 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot April 23, 2025 at 1:04 PM, Mohammad Amir : Checking Sir! April 23, 2025 at 1:06 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 166 - Anode: 135 VD Pre STK > VD - Cathode: 03 - Anode: 23 VD Post STK > Stacking - Cathode: 65 - Anode: 120 April 23, 2025 at 1:09 PM, T. Gàbornè C SL NC : @fa Please check CA NC 5#2 AGV 10 ,no move full mgz. Thx April 23, 2025 at 1:11 PM, Mohammad Amir : @FA Please check NC CA Line -5-2 P03/04 there is CNV-02 Inverter Abnormal error and because of this created job from this machine is pending. Thank you! April 23, 2025 at 1:15 PM, 안종수 : @FA NC CA 5-2 OUT PORT ERROR. Please check April 23, 2025 at 1:17 PM, Mohammad Amir : @FA Please check C1STKC72_C01 there is Load Oversize error. Thank you! April 23, 2025 at 1:25 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_P22 it is OOS since 11:25 and because of this there is a queue of materials on the recovery CNV. Thank you very much! April 23, 2025 at 1:40 PM, Mohammad Amir : @CCS Could you please check this issue ,it exists since 11:25. Material recovery has been stopped. Thank you very much! April 23, 2025 at 2:03 PM, QuangPhan : Hello! @FA NC AN AGV #4 error. Thanks April 23, 2025 at 2:12 PM, Yaroslav SL/C 6 line : @fa @mcs 6 line ST#1 station with cathode doesn’t work (light indicator) we are some times push LR, but AGV not bring mgz. Please check April 23, 2025 at 2:12 PM, Mohammad Amir : Checking April 23, 2025 at 2:14 PM, Mohammad Amir : It is working good ,we are receiving LR since 12:41 but unfortunately there was no material available at the O/P ports of CNV that's why AGV does not bring the materials. Thank you very much! April 23, 2025 at 2:18 PM, Yaroslav SL/C 6 line : Thanks for your cooperation. April 23, 2025 at 2:21 PM, QuangPhan : Could you please check RTV - NC AN line 6. We didn’t recieved material for a while. @MCS April 23, 2025 at 2:24 PM, Mohammad Amir : Checking April 23, 2025 at 2:24 PM, Mohammad Amir : You are welcome! April 23, 2025 at 2:25 PM, Mohammad Amir : Materials one the way ✅. Thank you! April 23, 2025 at 2:27 PM, QuangPhan : Thank you April 23, 2025 at 2:28 PM, Mohammad Amir : You are welcome! April 23, 2025 at 2:29 PM, Karina : Hello, @fa AGV#7 stopped near 5 line/STK, machine #11, please check. Thank you! April 23, 2025 at 2:37 PM, Deepu Divan FA-Eng : @Fa Please check Robot#1 NC Anode April 23, 2025 at 2:52 PM, T. Gàbornè C SL NC : @MCS Please check CA VD 4_02, 4-04 and 4-09 chambers, only 2 plates are inside. Thank you very much. April 23, 2025 at 2:52 PM, Mohammad Amir : Checking April 23, 2025 at 2:55 PM, T. Gàbornè C SL NC : @FA Please check CA 4#2 AGV no move full mgz. Thank you for much April 23, 2025 at 2:57 PM, Mohammad Amir : Job was cancelled by Operator for the remaining half chambers that's why we witnessed half chamber situation in 4-2,4-7,4-9. Please press LR for remaining half chamber of 4-2,4-7,4-9 VD CA. Thank you very much! April 23, 2025 at 3:17 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 162 - Anode: 133 VD Pre STK > VD - Cathode: 01 - Anode: 28 VD Post STK > Stacking - Cathode: 95 - Anode: 119 Thank you very much! April 23, 2025 at 3:18 PM, KIM SEYEON [김세연]_FA : Thank you April 23, 2025 at 3:18 PM, Mohammad Amir : You are welcome Sir! April 23, 2025 at 3:19 PM, Yaroslav SL/C 6 line : @fa @mcs I see that we have enough material but more than half of the stations on line 6 ST empty and waiting. Please check what the problem is. Thank you April 23, 2025 at 3:22 PM, Mohammad Amir : Checking April 23, 2025 at 3:24 PM, Mohammad Amir : Everything is good at the moment there are three materials on the way for line-6 . Because there was issue with CNV072 it caused materials delivery delay. I am monitoring. Thank you very much! April 23, 2025 at 3:28 PM, T. Gàbornè C SL NC : @MCS Please help me. NC CA side no move reels Storage #51-#52. We stop if we don't get reels. Please check and write me information. Thank you very much. April 23, 2025 at 3:28 PM, Mohammad Amir : Checking April 23, 2025 at 3:30 PM, Mohammad Amir : As there are a lot of transfers from STKC51 & 52 that's why you are witnessing delay in reels CA delivery. However to continue the smooth production,I have given the priority to CA Reels delivery to other tasks. So soon you will start receiving Reels CA . I am monitoring. Thank you very much! April 23, 2025 at 3:34 PM, Mohammad Amir : CA reels are on the way ✅. Thank you! April 23, 2025 at 3:39 PM, Karina : @fa AGV#3 stopped near 5 line/STK, machine #16, please check. Thank you! April 23, 2025 at 3:50 PM, Yaroslav SL/C 6 line : @fa AGV#3 stopped again near 5 line/STK machine #16, please check. Thank you! April 23, 2025 at 3:51 PM, Karina : due to constant stops, the material is delivered even more slowly April 23, 2025 at 4:00 PM, Karina : @Mcs please check if the LR for AGV station near STK #16 is up to date (5line STK) April 23, 2025 at 4:01 PM, Mohammad Amir : Checking April 23, 2025 at 4:02 PM, Mohammad Amir : Yes everything is fine from Our End. AGV#3 has been assigned to deliver Andie material MLA2416 to Line-5-16_P01 port. Thank you very much! April 23, 2025 at 4:03 PM, Karina : The problem is that there is a plate of material at this station, but no order. April 23, 2025 at 4:04 PM, Karina : and because of this AGV #3 keeps coming, stopping and blocking the road. Can you please cancel this LR? April 23, 2025 at 4:04 PM, Chinges Fa : gf ts agv5 c0sv001_vc05 has double material. What should I do with this material? April 23, 2025 at 4:05 PM, Mohammad Amir : Sure I am cancelling this LR. Thank you! April 23, 2025 at 4:05 PM, Karina : oh, thank you very much for the help! :) April 23, 2025 at 4:06 PM, Mohammad Amir : You are welcome! I am sending this material back to STKA72. April 23, 2025 at 4:08 PM, Mohammad Amir : I have resolved the issue ✅ Soon you will not face traffice issue ,AGV#3 on the way to store materials to the Post VD warehouse. Thank you very much! April 23, 2025 at 4:08 PM, Karina : Thank you very much again. April 23, 2025 at 4:09 PM, Mohammad Amir : You are welcome! Please contact us as soon as possible if you face any issue which is blocking the production. Thank you very much! April 23, 2025 at 4:36 PM, QuangPhan : Could you please make priority GF NC CA & AN side please . We will run out of material soon . Thank you. @MCS April 23, 2025 at 4:37 PM, Mohammad Amir : Sure,I am working on it. Thank you! April 23, 2025 at 4:40 PM, Mohammad Amir : I have given priority to CA AN reels materials delivery. ✅ I am monitoring. Thank you very much! April 23, 2025 at 4:50 PM, QuangPhan : Thank you so much! April 23, 2025 at 4:53 PM, 안종수 : @이주봉PM LEE JUBONG(FA) PM님 음극 릴창고 자동화물류도 문제 있나요? 음,양극 모두 릴 출고가 지연되고 있습니다. 확인 부탁드립니다 April 23, 2025 at 4:58 PM, Mohammad Amir : You are welcome! April 23, 2025 at 4:59 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot April 23, 2025 at 4:59 PM, Mohammad Amir : Checking Sir! April 23, 2025 at 5:00 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 160 - Anode: 125 VD Pre STK > VD - Cathode: 00 - Anode: 18 VD Post STK > Stacking - Cathode: 73 - Anode: 126 Thank you very much! April 23, 2025 at 5:11 PM, Mohammad Amir : @FA @F.A.briczius Gergő Please check C1STKA72_C02 there is Fork #1 Load Position Error when Active,it is blocking Anode stacking materials delivery. Thank you very much! April 23, 2025 at 5:13 PM, F.A.briczius Gergő : The help is on way April 23, 2025 at 5:14 PM, Mohammad Amir : Thank you very much! April 23, 2025 at 5:21 PM, T. Gàbornè C SL NC : @MCS CA reel Storage #51#52 no move reels. Please check. Thx April 23, 2025 at 5:22 PM, Mohammad Amir : CA Reels on the way ✅ I am keep increasing the priority. Thank you very much! April 23, 2025 at 5:26 PM, T. Gàbornè C SL NC : @Fa Please check CA reel Storage #52 , Tray ID loss Thx April 23, 2025 at 5:26 PM, Mohammad Amir : @F.A.briczius Gergő @FA Please check E0CNVC52_09_002 there is Data Loss error and it is blocking reels delivery. Thank you very much! April 23, 2025 at 5:30 PM, F.A.briczius Gergő : I will. Give me few minutes and i will go. I am on the 1F yet. Thank you April 23, 2025 at 5:30 PM, Mohammad Amir : Thank you very much for your hardwork 🙏. April 23, 2025 at 5:32 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 154 - Anode: 117 VD Pre STK > VD - Cathode: 03 - Anode: 21 VD Post STK > Stacking - Cathode: 74 - Anode: 129 Thank you very much! April 23, 2025 at 6:00 PM, 이한웅(삼구) : please check NC An #3 Robot April 23, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Zoltán, Nagy Zsolt, Zsurbej Zsolt 1F: Novák Károly, Kasztel Balázs, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 23, 2025 at 6:06 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16138) Data mismatch error! April 23, 2025 at 6:09 PM, Yon Ko/연커/ : Working on it April 23, 2025 at 6:10 PM, Simon Dávid D SL NC : @VK (mcs) hello 4 sora nem jönn CA a reel,megnéznéd köszönöm April 23, 2025 at 6:12 PM, Zsolt F.A. : @mcs Please delete MLA4174 from mcs because the plate handle is faulty and we had to take it out from production. April 23, 2025 at 6:14 PM, VK (mcs) : STK is busy , I will monitor it April 23, 2025 at 6:16 PM, VK (mcs) : I see, carrier data remove received Currently location is NA. And there is no job for that. April 23, 2025 at 6:18 PM, VK (mcs) : @FA Please check Anode post-STK A72 port 21 (12004) MLA3183 is not moving. Thx April 23, 2025 at 6:23 PM, Simon Dávid D SL NC : @FA hello NC CA reel raktár error,megnéznétek,köszönöm April 23, 2025 at 6:47 PM, Simon Dávid D SL NC : @VK (mcs) Hello NC CA reel ellátása nagyon lassú,tudunk tenni ez ellen?Köszönöm April 23, 2025 at 6:49 PM, VK (mcs) : Number of orders are high and STK was OoS, I will increase some priorities. April 23, 2025 at 6:54 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA 안녕하세요. 저희 음극 릴 창고 언제 정상화되나요? 잡이 밀려서 안나오는건가요? April 23, 2025 at 6:57 PM, Jun(정우준)_SKOH FA : 5분안에 조치 될거에여~! 지금 가동 하려고 하고있습니다. April 23, 2025 at 7:00 PM, 이한웅(삼구) : 감사합니다.... April 23, 2025 at 7:09 PM, Jun(정우준)_SKOH FA : 가동햇고 모니터링 하겠습니다. April 23, 2025 at 7:17 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 23 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 23, 2025 at 8:08 PM, Ivan Kasian Sl 5L 🥹 : Good evening everyone @Fa check please agv#5 near line 6.7 stacking April 23, 2025 at 8:36 PM, Simon Dávid D SL NC : @VK (mcs) hello NC AN nincsenek reelek megnéznéd mi az oka,köszönöm April 23, 2025 at 8:38 PM, Péti Gábor : Very important! Please help! April 23, 2025 at 8:38 PM, 카스텔 발라지 F.A. : Csáó! Az A51 raktárnak, nagyon sok munkája van. Figyeljük hogy le ne fagyjon a rendszer a sok munka miatt. April 23, 2025 at 8:39 PM, Simon Dávid D SL NC : Rendben de NC AN semmi reel nincs megálnak a gépek April 23, 2025 at 8:39 PM, VK (mcs) : STK was OoS, and currently there are many orders April 23, 2025 at 8:39 PM, 카스텔 발라지 F.A. : Most is le volt fagyva a daru. Nemsokára érkeznek a reel-ek April 23, 2025 at 8:39 PM, Dániel Hufnágel : Sajnos prioritás módosítása sem jatszik, elektródan is problémák vannak a tálca ellatással April 23, 2025 at 8:40 PM, Péti Gábor : Csodálatos... April 23, 2025 at 8:44 PM, Simon Dávid D SL NC : @FA hello AN 4-3 kemence kiált hibára,megnéznétek köszönöm April 23, 2025 at 8:50 PM, Simon Dávid D SL NC : @VK (mcs) hello AN VD 4-3 MES problémát ír ki a gép,megnéznéd köszönóm April 23, 2025 at 8:55 PM, VK (mcs) : As I see machine state changed several times with equipment status code 1005 and 1 , Equipment status should be code 2 then VD process will start. April 23, 2025 at 9:02 PM, VK (mcs) : When VD process finished then equipment status code is 1. So please change status or send materials to post-STK and apply again LR. April 23, 2025 at 9:06 PM, Zsolt F.A. : @mcs Please delete ghost tray from gf ca vd C1STKC72_P22. Therea is no data in scs nor any physical tray there. April 23, 2025 at 9:09 PM, VK (mcs) : MCS side also there is nothing it’s empty. Modifications should be on SCS side. April 23, 2025 at 9:12 PM, VK (mcs) : Now as I see , VD process is started. Thx April 23, 2025 at 10:51 PM, Péti Gábor : All my machines on GF NC AN have stopped due to reel shortage! What is the reason for this? April 23, 2025 at 10:57 PM, VK (mcs) : There are many orders in electrode side, April 23, 2025 at 11:01 PM, Dániel Hufnágel : Please modify some priority for assembly, and monitoring this area(A51/52)! As soon as something happend with storage notify us April 23, 2025 at 11:07 PM, 심재훈 : GF 릴 출고 지연으로 음극 노칭 전호기 정지 하였습니다. 해당이슈 확인 부탁 드립니다. April 23, 2025 at 11:08 PM, Jun(정우준)_SKOH FA : 확인해보겠습니다. April 23, 2025 at 11:09 PM, 심재훈 : 감사합니다 April 23, 2025 at 11:13 PM, 이한웅(삼구) : GF 음극 계속 비가동 발생해서. 라인별 1대차씩 확보 전까지 비가동하고 청소 진행합니다. 참고 부탁드립니다. @Jun(정우준)_SKOH FA April 23, 2025 at 11:13 PM, Jun(정우준)_SKOH FA : 내용공유 감사합니다. April 23, 2025 at 11:26 PM, Simon Dávid D SL NC : @VK (mcs) hello NC CA 4 és 5 sora nem jönnek a reel-ek,megnéznéd köszönöm April 24, 2025 at 12:02 AM April 24, 2025 at 12:02 AM, VK (mcs) : @FA Please check Cathode reel STK C51 LTC0478 is not moving M05-OP01 April 24, 2025 at 12:05 AM, VK (mcs) : Also please check Cathode reel STK C51 LTC1625 SCS indicates crane moving but there is no carrier and according to MCS carrier is on the M03-OP01 !! April 24, 2025 at 12:07 AM, VK (mcs) : LTC1817 same issue M06-OP01 April 24, 2025 at 12:08 AM, 카스텔 발라지 F.A. : Checking April 24, 2025 at 12:12 AM, Simon Dávid D SL NC : @VK (mcs) hello nagyon lassan jönnek a CA reel-ek 4 és 5 sora,megnéznéd,köszönöm April 24, 2025 at 12:13 AM, VK (mcs) : Please Waite I asked FA team to fix the issues. Thx April 24, 2025 at 12:22 AM, Zsolt F.A. : Please delete data from ports, there is nothing there. April 24, 2025 at 12:23 AM, VK (mcs) : Please first modify it in SCS then I will fix MCS, thx April 24, 2025 at 12:24 AM, Zsolt F.A. : We alreday did it. April 24, 2025 at 12:25 AM, VK (mcs) : I mean in transfer list, LTC1625 and LTC1817 order status : crane moving April 24, 2025 at 12:27 AM, VK (mcs) : What about LTC0478? It’s not in M05-OP01 ?? April 24, 2025 at 12:28 AM, VK (mcs) : 8111 April 24, 2025 at 12:33 AM, Zsolt F.A. : Checking April 24, 2025 at 12:33 AM, VK (mcs) : No need anymore, someone fixed. Thx April 24, 2025 at 12:34 AM, Zsolt F.A. : There was an empty carrier there but it was taken by the crane by now. April 24, 2025 at 12:38 AM, Zsolt F.A. : However there is still data on E0STKC51_M06_OP01 April 24, 2025 at 12:39 AM, Zsolt F.A. : Because of that false data there is double storage error with the crane now. April 24, 2025 at 12:39 AM, Zsolt F.A. : We are fixing the crane. April 24, 2025 at 12:40 AM, VK (mcs) : Well, job still exists for that carrier in SCS as well, that’s why I didn’t modify it. If there is nothing please cancel job for LTC1817 , then I will modify MCS April 24, 2025 at 12:41 AM, Zsolt F.A. : This message was deleted. April 24, 2025 at 12:45 AM, Simon Dávid D SL NC : @VK (mcs) hello 4 és 5 sori CA reel lenne szükségünk,kevés a reel.köszönöm April 24, 2025 at 12:45 AM, Zsolt F.A. : This is the empty port, delete data. There is nothing there. We deleted data de m scs. April 24, 2025 at 12:45 AM, Zsolt F.A. : "from scs" April 24, 2025 at 12:45 AM, VK (mcs) : Okay I will fix SCS and MCS as well, thx April 24, 2025 at 12:48 AM, VK (mcs) : Issue has been solved now, material will deliver soon. Please wait. Thx April 24, 2025 at 1:38 AM, Simon Dávid D SL NC : @VK (mcs) Hello CA reel-re lenne szükségem a 4 és 5 sora SOS nincs reel,köszönöm April 24, 2025 at 1:42 AM, Dániel Hufnágel : Másodperc és nézem April 24, 2025 at 1:42 AM, VK (mcs) : Orders in electrode side is high tonight , that’s why supply material for notching is delayed. April 24, 2025 at 1:45 AM, Dániel Hufnágel : Change some priority to notching area please! April 24, 2025 at 1:46 AM, VK (mcs) : I closed port temporary, I will change some priority as well. April 24, 2025 at 1:47 AM, Dániel Hufnágel : Thank you! April 24, 2025 at 2:02 AM, Simon Dávid D SL NC : @VK (mcs) hello megfog állni CA 4 és 5 sor ha nem kapunk reelt,ránéznél köszönöm April 24, 2025 at 2:12 AM, VK (mcs) : I am monitoring, and changing priorities April 24, 2025 at 2:13 AM, Simon Dávid D SL NC : Thanks April 24, 2025 at 2:41 AM, VK (mcs) : @FA Please check Cathode reel STK C51 Fork 1 double storage error! April 24, 2025 at 3:05 AM, 이한웅(삼구) : - GF 노칭 음극 자동화 릴 출고 지연 비가동 4/1 20:38~02:56 378분 4/2 22:16~02:56 280분 4/3 22:01~02:56 295분 5/1 22:09~02:56 287분 5/2 22:35~02:56 261분 5/3 22:19~02:56 277분 6/1 22:31~02:56 265분 6/2 22:18~02:56 278분 6/3 22:31~02:56 265분 April 24, 2025 at 3:17 AM, Ivan Kasian Sl 5L 🥹 : This message was deleted. April 24, 2025 at 3:31 AM, Simon Dávid D SL NC : @VK (mcs) @Dániel Hufnágel Hello CA reelek kellenek 4 5 6 sora,nem sok reel van,köszönöm April 24, 2025 at 3:39 AM, Dániel Hufnágel : @VK (mcs) Can you please modify more priorities for NC line? Thank you! April 24, 2025 at 3:44 AM, VK (mcs) : I will do it. Can you please check Port M05-OP01 reel STK C51 This is second time happened MCS indicates LTC0068 But in SCS there is nothing. April 24, 2025 at 4:30 AM, Zsolt F.A. : @mcs Please delete data from gf ca nc E0STKC51_M05. There is no material there. April 24, 2025 at 4:31 AM, Zsolt F.A. : We already deleted it from scs. April 24, 2025 at 4:31 AM, VK (mcs) : MCS is clear now April 24, 2025 at 5:44 AM, Ivan Chobitko : @VK (mcs) please share available AN plate post VD-Pre ST L4-5-6 April 24, 2025 at 5:50 AM, VK (mcs) : Next LOT available GF Pre-STK > notching Anode: 188 cathode:127 Pre-STK > VD Anode: 00 Cathode: 02 Post-STK > staking Anode:154 Cathode:120 April 24, 2025 at 5:53 AM, Simon Dávid D SL NC : @FA hello #3 yaskawa error ,megnéznétek köszönöm April 24, 2025 at 6:03 AM, duzzaman Md (MCS) : @FA Good morning! Please check E0STKC51_C02 There is a Travel Driver Error. Thank you and have a wonderful day ahead ! April 24, 2025 at 6:11 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 6 Tech, 1 SL Beteg: 4 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Viczai Tamás Skwarek Tibi ———————————— Assembly 1F(2) Fabricius Gergő Kertész Dani ———————————— Assembly GF(0) ———————————— Formation/Modul(1) Döme György April 24, 2025 at 6:13 AM, T. Gàbornè C SL NC : @Fa jó reggelt Megnéznétek CA oldalon a Robot#3-at, megállt. Köszönöm szépen April 24, 2025 at 6:22 AM, T. Gàbornè C SL NC : @Fa Ismét megállt a Robot#3 Robot not move error-al. April 24, 2025 at 6:55 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 해당 로봇 야간까지는 가동한걸로 보이는데 조치불가인가요? April 24, 2025 at 7:03 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 이반차FA 피엠님 음극 4-3에서 전일 메거진 전도 이슈가 발생했고, 금일 주간 근무 시작하고 안착 불량이 확인되어 점검이 필요해 보입니다. 또한 AGV LR/UR 구간에서도 반복적으로 실패가 발생하고 있으니, 현장 확인 부탁드립니다. April 24, 2025 at 7:07 AM, 방혁 PM(Bang.Hyuk) FA : 네 아까 증상확인했고 금일중으로 조치될수있게 점검 진행하겠습니다 April 24, 2025 at 7:08 AM, 방혁 PM(Bang.Hyuk) FA : @Farkas Tamàs pls check it April 24, 2025 at 7:10 AM, Farkas Tamàs : Ok April 24, 2025 at 7:25 AM, duzzaman Md (MCS) : @FA Please check E0STKC52 Load oversize error (right) Thank you April 24, 2025 at 7:26 AM, Farkas Tamàs : Ok April 24, 2025 at 7:27 AM, Farkas Tamàs : they are going to do it April 24, 2025 at 7:28 AM, T. Gàbornè C SL NC : @MCS Good Morning Please check CA reel Storage #51, no move reels. Thx April 24, 2025 at 7:31 AM, duzzaman Md (MCS) : There are active jobs. However, C52 is in error state. It should be normalised as soon as it comes in service. Monitoring further. Thanks April 24, 2025 at 7:39 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA51_B01& E0STKA52_B01 CV driven timeover Thanks you April 24, 2025 at 7:42 AM, Farkas Tamàs : Ok April 24, 2025 at 7:43 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 양극 로봇#3 계속 에러 발생하는데 업체 점검 부탁드립니다 April 24, 2025 at 7:47 AM, 방혁 PM(Bang.Hyuk) FA : 넵 내용확인했습니다 금일 노칭 4-3 포트하고 같이 점검 하겠습니다 April 24, 2025 at 8:02 AM, 김지수PM(Gyuri)_FA : @FA Could you tell me where VC22 is now exactly? I checked normal operation of VC22 (after trouble shooting), but it seems like to be in a weird position on the CIM April 24, 2025 at 8:12 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVA52_07012/046 INV 01 RUNTIME OVER ERROR Thank you very much April 24, 2025 at 8:23 AM, T. Gàbornè C SL NC : @MCS I know I write many times but it doesn't come from Reel#51#51 warehouse. Please help. Thx April 24, 2025 at 8:25 AM, duzzaman Md (MCS) : Because its going OOS too frequently. @FA team please check April 24, 2025 at 8:30 AM, F.A.briczius Gergő : @To all There are 2 technicians for the assembly 1st floor and the ground floor, as listed in the roster at the beginning of the day. We will go over every mistake, but everyone please be patient. Thank you! April 24, 2025 at 8:42 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) UNKDUP-MLA0042-250424065642B (C1STKA71, 0200304) April 24, 2025 at 8:52 AM, T. Gàbornè C SL NC : @ Megnéznétek CA oldalon a Robot#3-at, megállt. Köszönöm szépen April 24, 2025 at 9:23 AM, Koncz Tamás : @duzzaman Md (MCS) , At the E0STKC51, 01-011-05 Shelf i disable, because it show the LTC0671 emptyempty tray, but the shelf is full empty ( no reel tray) can you check where is this tray now, and after delete from the C51? Thanks April 24, 2025 at 9:29 AM, Koncz Tamás : CS PLC members check this machine April 24, 2025 at 9:30 AM, duzzaman Md (MCS) : The last location for LTC0671 is E0STKC51_C01 April 24, 2025 at 9:39 AM, duzzaman Md (MCS) : Also, as we see its stored in E0STKC51, UNIT : 0101105 and in moving state at 9:06:00.032 could you confirm if the carrier is there ? As per RTD, no information is available regarding this carrier. April 24, 2025 at 9:40 AM, 방혁 PM(Bang.Hyuk) FA : Physically Not there April 24, 2025 at 9:45 AM, Sazzad Bhai SKon : But according to SCS screen it is still there. But the shelf 0101105 is out of service now. Did someone removed the carrier manually? April 24, 2025 at 9:46 AM, 방혁 PM(Bang.Hyuk) FA : The carrier is not there already, only data remains in the SCS April 24, 2025 at 9:46 AM, Koncz Tamás : No, we not take out by manual, but the tray is not here. April 24, 2025 at 9:47 AM, Sazzad Bhai SKon : Please clear the data from SCS. We'll also clear data from MCS. April 24, 2025 at 9:48 AM, Sazzad Bhai SKon : We'll analyze this issue April 24, 2025 at 9:49 AM, Koncz Tamás : Thank you April 24, 2025 at 9:51 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 124 - Anode: 176 VD Pre STK > VD - Cathode: 01 - Anode: 01 VD Post STK > Stacking - Cathode: 109 - Anode: 115 Thank you very much! April 24, 2025 at 9:53 AM, Koncz Tamás : I cant clear data, only remove April 24, 2025 at 9:55 AM, QuangPhan : Hello! @FA Could you please transfet these plates in VD AN 5/8 #44 to KA72 . The chamber has a n error Left/Top NFB off state . Thank you April 24, 2025 at 10:06 AM, Koncz Tamás : The CS Team make PLC changes, now the Robot work again April 24, 2025 at 10:22 AM, duzzaman Md (MCS) : @FA Please check E0STKC51_C01 TRAVEL EXACT POSITION ERROR AFTER MOVEMENT THANK YOU April 24, 2025 at 10:38 AM, Koncz Tamás : Done, but after Crane Distance error..i going aound to the factory to solve this problem April 24, 2025 at 12:26 PM, 김수민 : - 자동화 물류 릴창고 크레인 에러 및 잡 과부하로 양극 릴 공급이 지연되고 있습니다. 릴 출고 즉시 순차적으로 재가동하겠습니다. 4-1 11:15~ 4-2 11:55~ 4-3 11:20~ 5-1 12:02~ 5-2 11:48~ 5-3 11:44~ 6-1 12:09~ 6-2 10:45-11:25, 12:15~ 6-3 11:30~ April 24, 2025 at 12:59 PM, Yaroslav SL/C 6 line : Hello everyone @mcs could you check please why AGV not bring material to 6 line ST. Thanks April 24, 2025 at 1:04 PM, duzzaman Md (MCS) : AGV #09 is on the way. Thanks ! April 24, 2025 at 1:09 PM, KIM SEYEON [김세연]_FA : @JUNG WOO PARK @김수민 명일 양극 노칭 상공데크 컨베이어의 턴테이블 점검이 필요합니다. 09시부터 12시까지 릴을 수동포트에서 뽑아서 생산 진행 가능할까요? April 24, 2025 at 1:09 PM, KIM SEYEON [김세연]_FA : 4월25일 09시부터 12시까지 작업을 하려고 합니다. April 24, 2025 at 1:41 PM, duzzaman Md (MCS) : This message was deleted. April 24, 2025 at 1:42 PM, duzzaman Md (MCS) : @FA Kindly check C1STKA71_P16 INV 01 RUN TIME OVER ERROR Thanks April 24, 2025 at 1:45 PM, 하연철(HA YEONCHEOL)/ : 설비 순차 가동 진행 4-1 11:15~12:44 4-2 11:55~12:49 4-3 11:20~12:52 5-1 12:02~12:46 5-2 11:48~12:48 5-3 11:44~12:51 6-1 12:09~12:53 6-2 10:45-11:25, 12:15~13:11 6-3 11:30~12:57 April 24, 2025 at 1:57 PM, Yaroslav SL/C 6 line : @mcs @fa More than half of the stations are empty and waiting for material on the ST 4 5 6 lines, what is the problem, please check. We may stop production due to a lack of materials, even though we have enough in stock. Thanks April 24, 2025 at 1:58 PM, duzzaman Md (MCS) : Checking April 24, 2025 at 2:18 PM, Karina : @mcs Hello, We have a slow supply of cathode, or no cathode at all, can you help? Thank you April 24, 2025 at 2:30 PM, duzzaman Md (MCS) : Thank you for your patience. As we see, from the MCS side ,jobs are being created and delivered. It's issue from the ACS side. April 24, 2025 at 2:31 PM, duzzaman Md (MCS) : @ACS Please check Thank you April 24, 2025 at 2:32 PM, Sazzad Bhai SKon : Acs received the jobs replied with HCACK 4. But AGV are not assigning. @Acs please check, thank you April 24, 2025 at 2:36 PM, duzzaman Md (MCS) : @ FA Please check C1STKA71_C02 LOAD OVERSIZE ERROR (LEFT) SINCE 14:00 THANKS April 24, 2025 at 2:41 PM, QuangPhan : Hello! @FA NC AN C2STKA71-P11-MCP error. TRAY ID Loss. Thanks April 24, 2025 at 2:50 PM, Karina : @mcs 5 line will stop due to lack of materials April 24, 2025 at 2:53 PM, Koncz Tamás : @방혁 PM(Bang.Hyuk) FA April 24, 2025 at 2:54 PM, Sazzad Bhai SKon : MLA4212 has been delayed. Mcs order is normal, but AGV did not pic it for a long time April 24, 2025 at 2:55 PM, Sazzad Bhai SKon : We confirm that, MCS order is normal, and there are enough lot available April 24, 2025 at 2:58 PM, Karina : What's the problem then? April 24, 2025 at 2:59 PM, Sazzad Bhai SKon : Acs delaying. Now transfer initiated April 24, 2025 at 3:01 PM, duzzaman Md (MCS) : @FA KINDLY CHECK E0CNVA52_07_001 Data mismatch error Thanks April 24, 2025 at 3:03 PM, duzzaman Md (MCS) : Also please have a look at E0CNVC52_RTV01 CV01 RUNTIME OVER ALARM. Much obliged for your support today. April 24, 2025 at 3:03 PM, Zaya/ivancsa FA : solved April 24, 2025 at 3:15 PM, Zaya/ivancsa FA : solved April 24, 2025 at 3:20 PM, Kateryna SSL C : Hello everyone! L5 stopped due to lack of material. All stations are empty. L4 and 5 also will stop also soon. Could you please give some information? April 24, 2025 at 3:23 PM, Sazzad Bhai SKon : We'll change priority to 5th line April 24, 2025 at 3:25 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 145 - Anode: 165 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 137 - Anode: 129 Thank you very much! April 24, 2025 at 3:32 PM, Sazzad Bhai SKon : @FA There is a tray stuck at E0STKA52_P01. (LTA1521.) this is creating long queue. April 24, 2025 at 3:32 PM, duzzaman Md (MCS) : @SCS Please check C1STKA71_P22 HUGE LINE OF MATERIALS THERE. THANKS April 24, 2025 at 3:35 PM, duzzaman Md (MCS) : @FA Please check E0CNVC5108_195 Data loss error Thank you April 24, 2025 at 3:37 PM, duzzaman Md (MCS) : 16 carriers waiting. 😅 Thank you April 24, 2025 at 3:39 PM, 김수민 : AN VD 전창고 C1STKA71-C02 에러 발생 멈춰있습니다. 확인 부탁드립니다 April 24, 2025 at 3:39 PM, Skwarek Tibor : Done April 24, 2025 at 3:39 PM, Sazzad Bhai SKon : Thank you, carrier transfer initiated now April 24, 2025 at 3:40 PM, Skwarek Tibor : You re welcome April 24, 2025 at 3:42 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_186 DATA LOSS ERROR THANK YOU April 24, 2025 at 3:53 PM, 김수민 : @duzzaman Md (MCS) Please manually release it to the port - E0STKC51_M01~08 - LTC1467 0073 1195 1583 1781 1385 1381 1850 April 24, 2025 at 3:59 PM, Sazzad Bhai SKon : MLA1115 from C1CNV072_P08 destination Stacking 5th line: AGV has been assigned and unassigned frequently. April 24, 2025 at 4:01 PM, duzzaman Md (MCS) : Already released. Thank you April 24, 2025 at 4:15 PM, duzzaman Md (MCS) : @FA Kindly check E0STKA34_C01 Load oversize Error (Right) Thanks April 24, 2025 at 4:18 PM, Karina : @mcs Please check the station calls near STK/5 line as the material is incredibly slow to arrive here. Ca - machine 4, 7, 8, 11, 12, 15, 16, 19, 20 An - machine 7, 8, 11, 15, 19, 20 April 24, 2025 at 4:18 PM, duzzaman Md (MCS) : Also please have a look at E0CNVC51_8215 EQ 02 PIO T01 Time over E0STKC51_C01/C02 Empty release error/ Fork#1 drive error April 24, 2025 at 4:20 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 양극 릴창고 크레인 멈춰있습니다 확인 부탁드립니다 April 24, 2025 at 4:21 PM, 방혁 PM(Bang.Hyuk) FA : @김지수PM(Gyuri)_FA 피엠님 확인 부탁드립니다 April 24, 2025 at 4:27 PM, duzzaman Md (MCS) : There are jobs, also for 4th and 5th line, priority for jobs has already been increased. Thank you . April 24, 2025 at 4:31 PM, 심재훈 : GF 후공정 4라인 양극 공급 부족해서 정지했는데, 자동화 분들 인지 하고 계신가요?? April 24, 2025 at 4:33 PM, 심재훈 : 라인정지가 4,5라인 두라인 정지했는데, 아무런 액션이 없네요.. April 24, 2025 at 4:33 PM, KIM SEYEON [김세연]_FA : 지금 스택 4라인서 보고 있습니다. April 24, 2025 at 4:34 PM, KIM SEYEON [김세연]_FA : 설비의 장애는 없습니다. 자리 가서 설명 드리겠습니다. April 24, 2025 at 4:35 PM, 심재훈 : 네, 기다리겠습니다 April 24, 2025 at 4:42 PM, Karina : @fa Please Help with manually take out the plates out of the warehouse April 24, 2025 at 4:45 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 지원부탁드립니다 April 24, 2025 at 4:46 PM, Dima Kusyk : @mcs Please share information about plates for STK. Thanks April 24, 2025 at 4:49 PM, Lajos Tihor : @Koncz Tamás Szia! Mivel az AGV-k 2 sort sem tudnak ellátni anyaggal, nemhogy 3-at. Ezért azt az utasítást kaptuk, hogy manuálisan kell magazinokat szállítanunk a ST-re, ha üresek a sorok. Viszont WH-ból nektek kellene kikérni a plate-ket. A szállítás a mi feladatunk. Ki/kik fognak ebben segíteni? April 24, 2025 at 4:51 PM, duzzaman Md (MCS) : Hi, if you are asking for the Updated GF Next lot quantity available,here you go. If something else, kindly let me know as well. VD Pre STK > Notching - Cathode: 150 - Anode: 144 VD Pre STK > VD - Cathode: 02 - Anode: 04 VD Post STK > Stacking - Cathode: 132 - Anode: 118 Thank you! @Dima Kusyk April 24, 2025 at 5:01 PM, Lee Junghan(이정한)_CS : @duzzaman Md (MCS) Reel CA Stocker #1 E0STKC51 Shelf 2-32-14 was loading a reel, but another reel was present and an error occurred when the load was detected. Plz check why happened. April 24, 2025 at 5:03 PM, Lee Junghan(이정한)_CS : We're going to move the reel into empty shelf and block 2-32-14. April 24, 2025 at 5:08 PM, Lee Junghan(이정한)_CS : Can you make Job for LTC0524/LTC0627. We need to move empty shelf. April 24, 2025 at 5:08 PM, Lee Junghan(이정한)_CS : Delete previously Job. April 24, 2025 at 5:09 PM, Lee Junghan(이정한)_CS : Let me know when you done April 24, 2025 at 5:11 PM, duzzaman Md (MCS) : Done ✔️ April 24, 2025 at 5:11 PM, Lee Junghan(이정한)_CS : Can you put priorities on the list? April 24, 2025 at 5:11 PM, Sazzad Bhai SKon : Hi manager, for which machine? April 24, 2025 at 5:11 PM, QuangPhan : Hello! @FA NC AN Robot #1 error. Thanks April 24, 2025 at 5:12 PM, Lee Junghan(이정한)_CS : Check April 24, 2025 at 5:12 PM, 김수민 : @FA PLZ CHECK NC CA NC Robot #2 error April 24, 2025 at 5:13 PM, Lee Junghan(이정한)_CS : Still not changed April 24, 2025 at 5:14 PM, Sazzad Bhai SKon : LTC0268 isn't there? April 24, 2025 at 5:15 PM, Lee Junghan(이정한)_CS : LTC0267 April 24, 2025 at 5:15 PM, Lee Junghan(이정한)_CS : Can we make Job on manual ? April 24, 2025 at 5:16 PM, Sazzad Bhai SKon : Yes, we'll send in M01 April 24, 2025 at 5:16 PM, Lee Junghan(이정한)_CS : Ok April 24, 2025 at 5:16 PM, Sazzad Bhai SKon : The STK is out of service now. April 24, 2025 at 5:17 PM, Lee Junghan(이정한)_CS : First make order and then we will start on April 24, 2025 at 5:17 PM, Lee Junghan(이정한)_CS : Let me know April 24, 2025 at 5:19 PM, Lee Junghan(이정한)_CS : Wait will try April 24, 2025 at 5:19 PM, Sazzad Bhai SKon : Sent it to M03 and M04 April 24, 2025 at 5:19 PM, Lee Junghan(이정한)_CS : ok April 24, 2025 at 5:20 PM, Lee Junghan(이정한)_CS : We will start on April 24, 2025 at 5:20 PM, Lee Junghan(이정한)_CS : We're gonna get the crane up and running. April 24, 2025 at 5:21 PM, 방혁 PM(Bang.Hyuk) FA : 양극자재 14개 완료 음극자재 12개 출고중 수동명령 수행중입니다. 스테이션 상태보고 추가로 출고 하겠습니다 April 24, 2025 at 5:23 PM, Koncz Tamás : Szia, vélhetően ez azért alakult ki mert 2 technikus volt a délelőtt folyamán, és nem igazán volt elég a 2 emeletre.... Még mindig 2 technikus van benn, éjszakás műszakban már jobb lesz a helyzet, vélhetően helyreáll a szállítás. Ilyen esetben a kikérést ki fogja pontosan intézni pontosan még nem tudom. April 24, 2025 at 5:23 PM, Sazzad Bhai SKon : Please let us know if the transport order is normalized in 5th line. We'll roll back the priority April 24, 2025 at 5:26 PM, Sazzad Bhai SKon : LTC0524 stuck in C02 April 24, 2025 at 5:27 PM, Lajos Tihor : Te is tudod, hogy nem ez a baj... April 24, 2025 at 5:27 PM, Lee Junghan(이정한)_CS : This message was deleted. April 24, 2025 at 5:27 PM, Lee Junghan(이정한)_CS : Can you make job order? April 24, 2025 at 5:27 PM, Kateryna SSL C : 4/5/6 Supplying still slowly for all of them. You can roll back priority. Thank you April 24, 2025 at 5:28 PM, Lee Junghan(이정한)_CS : There isn't a Job on LTC0524 that Crane has April 24, 2025 at 5:28 PM, Koncz Tamás : Nagyban elősegítette hogy rengeteg volt a hiba April 24, 2025 at 5:28 PM, Sazzad Bhai SKon : But MCS shows C02 is oos April 24, 2025 at 5:28 PM, Lee Junghan(이정한)_CS : Wait April 24, 2025 at 5:29 PM, Lee Junghan(이정한)_CS : I will solve April 24, 2025 at 5:29 PM, JAEYOON KIM / CS : I sent the cargo to 01-032-15 temporarily. April 24, 2025 at 5:30 PM, Lee Junghan(이정한)_CS : Done April 24, 2025 at 5:30 PM, Sazzad Bhai SKon : It stored at 0103215 April 24, 2025 at 5:30 PM, Lee Junghan(이정한)_CS : Yes i did on manual April 24, 2025 at 5:34 PM, 김수민 : @Fa Plz check April 24, 2025 at 5:34 PM, 김수민 : @fa Plz check April 24, 2025 at 5:38 PM, Kertész Dániel : We could be really happy, if we could help you, but today we don't have FA technicians on the groundfloor, we have to operate on the 1F. April 24, 2025 at 5:41 PM, Kertész Dániel : The night shift will solve this error immediately! April 24, 2025 at 5:44 PM, Karina : @fa AGV station near STK/5 line/machine #19 not working, please check April 24, 2025 at 5:53 PM, Lajos Tihor : Megegyeztek a nagyok. 2 ember tőletek fog manuálisan anyagot vinni az L4re April 24, 2025 at 6:00 PM, Simon Dávid D SL NC : @FA hello nagyon kevés a CA reel,megnéznétek köszönöm April 24, 2025 at 6:04 PM, Simon Dávid D SL NC : @FA hello #robot NC CA error ,megnéznétek köszönöm April 24, 2025 at 6:15 PM, 이한웅(삼구) : RTV 확인 부탁드립니다. April 24, 2025 at 6:15 PM, 이한웅(삼구) : An NC April 24, 2025 at 6:17 PM, 이한웅(삼구) : An 릴 공급 지연으로 노칭 6라인 2,3호기 설비 정지중입니다 April 24, 2025 at 6:18 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Novák Zoltán, Nagy Zsolt, Kovács Szabolcs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 24, 2025 at 6:20 PM, VK (mcs) : @FA Please check Anode conveyor E0CNVA52 track(7048) LTA0186 is not moving. April 24, 2025 at 6:21 PM, Simon Dávid D SL NC : @VK (mcs) hello 6 sora kevés a CA reel,megnéznéd köszönöm April 24, 2025 at 6:24 PM, 방혁 PM(Bang.Hyuk) FA : @MCS From now on, ST4L will not use AGV. Then, the ST station is in manual state April 24, 2025 at 6:25 PM, Yon Ko/연커/ : Solved. April 24, 2025 at 6:26 PM, VK (mcs) : @FA Please check Cathode Post-STK C72 Inactive stop April 24, 2025 at 6:41 PM, Dániel Hufnágel : @Péti Gábor Anód 72 es raktárban telepitő cég emberei sikeresen megállitották a raktárat! Anyag kimaradás is lehet emiatt, egyenlőre szíves türelmet kérünk! April 24, 2025 at 6:41 PM, Novák Károly F. A. : @VK (mcs) Please check E0STKA51 M03 LTA0745. The carrier is empty. April 24, 2025 at 6:47 PM, VK (mcs) : As I checked LTA0745 UR received at 17:05:18 04.24 from E1SLA020_P02 to the STK A51 as carrier status (FULL). April 24, 2025 at 6:49 PM, 이한웅(삼구) : Why was this manual released? April 24, 2025 at 6:53 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 저희 이거 사용 못하는 자재인데 창고에 넣어 주실 수 있나요? April 24, 2025 at 6:54 PM, Novák Károly F. A. : This way we can't send it back to the warehouse. Is there any way to change its status? April 24, 2025 at 6:56 PM, VK (mcs) : Sorry what was the issue ? April 24, 2025 at 6:57 PM, VK (mcs) : Please Rack it out manually and rack in it again. April 24, 2025 at 7:01 PM, Novák Károly F. A. : Thank you very much. April 24, 2025 at 7:02 PM, 이한웅(삼구) : This is a material we cannot use. April 24, 2025 at 7:04 PM, VK (mcs) : As I checked the report, this material released base on OP request. And now it has transfer command to the STKC51 April 24, 2025 at 7:33 PM, Simon Dávid D SL NC : @VK (mcs) @Dániel Hufnágel hello CA reel ellátás nagyon lassú,ellenőriznétek köszönöm April 24, 2025 at 7:35 PM, VK (mcs) : Carriers are coming, please wait April 24, 2025 at 7:43 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 18시30분경부터 음극 VD후창고 크레인 문제로 스택에 자재공급 안되고 있습니다. 조치중이며 완료되면 공유드리겠습니다. April 24, 2025 at 7:45 PM, 심재훈 : 네 알겠습니다. April 24, 2025 at 7:47 PM, VK (mcs) : @FA Please check Anode Reel STK A52 Crane doesn't take a tray P01 (6074) April 24, 2025 at 8:02 PM, Novák Károly F. A. : Checking April 24, 2025 at 8:06 PM, Novák Károly F. A. : Solved April 24, 2025 at 8:09 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA NC An 4-3 #6 AGV 매거진 전도 발생 확인 부탁드립니다. April 24, 2025 at 8:15 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please come to NC AN 4-3 with camera April 24, 2025 at 8:20 PM, Ivan Chobitko : ST L6 receive one An plate from AGV Warehouse problem solved ? April 24, 2025 at 8:35 PM, VK (mcs) : @FA Please check Cathode Reel STK C51 LTC1781 (0201105) LTC1794 (0101005) Job aborted by storage due to error but shelf status is still retrieve reserved In SCS. Please manually transfer them to Zone April 24, 2025 at 8:35 PM, Novák Károly F. A. : Checking April 24, 2025 at 8:38 PM, KIM SEYEON [김세연]_FA : 20시30분부로 AN VD 후창고 다시 가동됩니다. April 24, 2025 at 8:39 PM, KIM SEYEON [김세연]_FA : solved April 24, 2025 at 9:02 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 크레인 다시 멈춰서 점검중입니다. April 24, 2025 at 9:02 PM, 심재훈 : 아 알겠습니다 April 24, 2025 at 9:05 PM, Zsurbej Zsolt F.A. : I'll check later, there's a lot of work in the warehouse right now. April 24, 2025 at 9:31 PM, 심재훈 : 얼마나 더 걸릴까요? April 24, 2025 at 9:41 PM, KIM SEYEON [김세연]_FA : 30분정도 더 예상됩니다. April 24, 2025 at 9:42 PM, Ivan Chobitko : I see there are a few plate anodes in ports P08 and P12, but the robots don't take them. Can you assign them a job? April 24, 2025 at 9:42 PM, KIM SEYEON [김세연]_FA : conveyor is stopped due to Stacker Crane issue. so agv is not moving. April 24, 2025 at 9:47 PM, Ivan Chobitko : This message was deleted. April 24, 2025 at 10:00 PM, 카스텔 발라지 F.A. : @VK (mcs) Hello! Please delete a transfer job (MLA6068) at C2CNV072. we cant delete that in CCS April 24, 2025 at 10:02 PM, 카스텔 발라지 F.A. : C1CNV072 * ! April 24, 2025 at 10:03 PM, VK (mcs) : Done April 24, 2025 at 10:09 PM, 이한웅(삼구) : please check NC An #4 AGV April 24, 2025 at 10:11 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check April 24, 2025 at 10:12 PM, Yon Ko/연커/ : @Nandia FA take action please. April 24, 2025 at 10:13 PM, Nandia FA : solved April 24, 2025 at 10:30 PM, VK (mcs) : Please also check LTC0023 SCS indicates it in 2 places Shelf (0103309) E0STKC51_BP05 (60011). Thx April 24, 2025 at 10:33 PM, Ivan Chobitko : I see AGV moving, it’s means problem solved ? April 24, 2025 at 10:34 PM, VK (mcs) : Do you mean anode STK? No it's still under maintain April 24, 2025 at 10:35 PM, KIM SEYEON [김세연]_FA : no it is going to charge April 24, 2025 at 10:35 PM, KIM SEYEON [김세연]_FA : sorry please wait a little more. April 24, 2025 at 10:35 PM, KIM SEYEON [김세연]_FA : 10 min April 24, 2025 at 11:01 PM, Novák Károly F. A. : This message was deleted. April 24, 2025 at 11:01 PM, Novák Károly F. A. : @VK (mcs) These shelves are empty. (0103309, 0101005, 0201105) April 24, 2025 at 11:04 PM, VK (mcs) : So please modify SCS And transfer LTC0023 to the zone April 24, 2025 at 11:09 PM, KIM SEYEON [김세연]_FA : 11시부로 크레인 다시 가동했습니다. April 24, 2025 at 11:09 PM, KIM SEYEON [김세연]_FA : 생산에 차질을 드려 죄송합니다. April 24, 2025 at 11:11 PM, Ivan Chobitko : Thank you very much for your work! April 24, 2025 at 11:12 PM, Novák Károly F. A. : This message was deleted. April 24, 2025 at 11:12 PM, Novák Károly F. A. : Ltc0023 is E0STKC51 B05 April 24, 2025 at 11:19 PM, VK (mcs) : Thank you for checking. Please transfer it to the Zone, April 24, 2025 at 11:26 PM, Novák Károly F. A. : We have deleted the data from 0103309. We cannot delete data from 0101005 and 0201105. April 24, 2025 at 11:27 PM, VK (mcs) : Thank you. If you make manual job to the Zone for that shelves then carriers will transfer. April 24, 2025 at 11:28 PM, KIM SEYEON [김세연]_FA : please co.e to stack line 6 April 24, 2025 at 11:34 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 매거진 수동출고 하겠습니다. April 24, 2025 at 11:43 PM, Novák Károly F. A. : Ltc0023 is now in place (0103309). April 24, 2025 at 11:44 PM, VK (mcs) : Thank you April 24, 2025 at 11:44 PM, Novák Károly F. A. : You are welcome. April 25, 2025 at 12:26 AM April 25, 2025 at 12:26 AM, VK (mcs) : @FA Please check Cathode conveyor E0CNVC52 RTV LTC1044 is not moving April 25, 2025 at 12:33 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check April 25, 2025 at 12:42 AM, Novák Károly F. A. : Solved April 25, 2025 at 12:43 AM, Novák Károly F. A. : Done April 25, 2025 at 12:55 AM, VK (mcs) : @FA Please check Cathode reel STK C51 port M01 There are 2 pending jobs in buffer ports and occupied. Please transfer LTC1242. Thx April 25, 2025 at 1:07 AM, Zsurbej Zsolt F.A. : @ (MCS/RTD) We took out empty plate (MLC1220)from C0PVC030_P02 port The plate handle is damaged! April 25, 2025 at 1:33 AM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 24 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 25, 2025 at 1:36 AM, Zsurbej Zsolt F.A. : the operators haven't taken the material off yet April 25, 2025 at 1:37 AM, VK (mcs) : Oh, I checked it was empty-empty. Btw. thank you for information April 25, 2025 at 1:39 AM, Zsurbej Zsolt F.A. : you are wellcom April 25, 2025 at 2:13 AM, Novák Károly F. A. : @VK (mcs) Removed due to plate error: MLA6064 (Ma4435, Ma2409, Maa4164, Ma2578, Ma6517, Ma4070) April 25, 2025 at 2:14 AM, Novák Károly F. A. : The magazines were empty. April 25, 2025 at 2:54 AM, Ivan Kasian Sl 5L 🥹 : @fa chek please agv10 near line 6.5 Stack Thank you so much April 25, 2025 at 3:00 AM, Yon Ko/연커/ : Solved April 25, 2025 at 3:09 AM, Ivan Kasian Sl 5L 🥹 : Thank you April 25, 2025 at 3:15 AM, Simon Dávid D SL NC : @FA hello CA VD #5 AGV error,megnéznétek köszönöm April 25, 2025 at 3:29 AM, Amgaa FA : solved April 25, 2025 at 6:08 AM, Barta Rudi : Good morning. Please check why the cathode reel warehouse (STKC51) is not operating. April 25, 2025 at 6:19 AM, duzzaman Md (MCS) : Good morning. We can see Crane 02 is out if service from MCS side. Thanks ! April 25, 2025 at 6:20 AM, duzzaman Md (MCS) : More specifically Port interface error since 5:40 April 25, 2025 at 6:42 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 103 - Anode: 105 VD Pre STK > VD - Cathode: 01 - Anode: 25 VD Post STK > Stacking - Cathode: 121 - Anode: 95 Thank you ! April 25, 2025 at 6:56 AM, 방혁 PM(Bang.Hyuk) FA : 금일 스택 담당 삼구인원 누구인가용 April 25, 2025 at 6:56 AM, 조범희 : 네 무슨일이신가요? April 25, 2025 at 7:34 AM, duzzaman Md (MCS) : @FA Kindly check E0STKC51_C02 Travel Driver Error Thanks ! April 25, 2025 at 7:42 AM, 방혁 PM(Bang.Hyuk) FA : Solved April 25, 2025 at 8:11 AM, 김수민 : @duzzaman Md (MCS) Please manually release it to the port E0STKC51_M01~08 LTC1882 1696 0835 1433 0712 0692 1457 1073 1546 April 25, 2025 at 8:18 AM, duzzaman Md (MCS) : Done. Thanks April 25, 2025 at 8:19 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— April 25, 2025 at 8:27 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A C1STKA72 shelf (0205301) UNKDUP-MLA0042-250424065642B (C1STKA71, 0200304) UNKDUP-MLA6066-250424231441A (C1STKA71, 0104701) UNKDUP-MLA6066-250424231441B (C1STKA71, 0100803) April 25, 2025 at 8:46 AM, Elena Dzhul : Hello! We need help on GF VD Ca Stocker#2, cathode material is not supplied for manual transfer April 25, 2025 at 8:59 AM, KIM SEYEON [김세연]_FA : @JUNG WOO PARK @김수민 금일 양극 노칭 상공데크 컨베이어의 턴테이블 점검 관련 09시부터 12시까지 진행하려 했으나 혹시 시간을 14시부터 17시로 변경 진행하도 될까요? April 25, 2025 at 9:18 AM, KIM SEYEON [김세연]_FA : @김수민 기존 계획대로 09시부터 12시까지 진행하겠습니다. 혼선을 드려 죄송합니다. April 25, 2025 at 9:19 AM, KIM SEYEON [김세연]_FA : @문진영 매니저님 작업 시작시 카톡으로 공유부탁드립니다 April 25, 2025 at 9:30 AM, 김수민 : @duzzaman Md (MCS) Please manually release it to the port E0STKC51_M01~10 LTC1488 1786 1875 0197 1171 1124 0537 0855 0901 0068 1817 0976 0170 April 25, 2025 at 9:41 AM, 방혁 PM(Bang.Hyuk) FA : @Mr.Miti (미티) FA can you check E0STKC52 Crane distance Error? April 25, 2025 at 9:42 AM, duzzaman Md (MCS) : LTC0068 & LTC1817 couldn't be found. Others have been released. Thanks ! April 25, 2025 at 9:44 AM, Mr.Miti (미티) FA : Yes April 25, 2025 at 9:44 AM, 방혁 PM(Bang.Hyuk) FA : Thank you! April 25, 2025 at 9:59 AM, Mr.Miti (미티) FA : Solved (thumbsup) April 25, 2025 at 10:35 AM, duzzaman Md (MCS) : @FA Please check Cathode conveyor E0CNVC52_09_041 Turn abnormal error. Thanks! April 25, 2025 at 10:37 AM, 방혁 PM(Bang.Hyuk) FA : ^-^)b April 25, 2025 at 11:03 AM, 방혁 PM(Bang.Hyuk) FA : @김수민 주임님 오퍼레이터 계정으로 GF NC에서 릴창고로 메뉴얼 명령을 너무 많이 생성해서 창고가 처리를 못합니다... 오퍼레이터분들에게 메뉴얼 명령 생성할때 너무 많이 한번에 하지 말라고 말씀해주실수 있을까요... April 25, 2025 at 11:08 AM, 김수민 : 12시까지는 수동출고해서 생산해야 하다보니 제가 MCS한테 출고 요청했습니다. 업체 점검으로 자동출고 막혀있는 상태인건 맞죠? April 25, 2025 at 11:12 AM, Sazzad Bhai SKon : @FA MLA4179 stored in the STK as UNK name. Location: C1STKA72, 0200102. please rack out from manual port and restock. Thank you April 25, 2025 at 11:13 AM, KIM SEYEON [김세연]_FA : @이승엽 @문진영 매니저님 현재 작업 진행현황 문의드립니다. 12시까지 완료 가능한지요? April 25, 2025 at 11:14 AM, 이승엽 : 변경점 요청 드렸을 때, 시작이 30분 지연되어 12시 반 정도까지 요청을 드렸는데, 12시반정도까지 진행 가능할지요? April 25, 2025 at 11:15 AM, KIM SEYEON [김세연]_FA : @김수민 12시반정도까지 진행하도록 부탁드립니다. April 25, 2025 at 11:16 AM, 김수민 : 피엠님 양극 1번 릴창고 크레인 멈춰있는데 확인 부탁드립니다 April 25, 2025 at 11:17 AM, 방혁 PM(Bang.Hyuk) FA : @Mr.Miti (미티) FA Can you check E0STKC51 ??? April 25, 2025 at 11:18 AM, 이승엽 : 작업 종료 시 변경점 방에 공지 드릴 수 있도록 하겠습니다. April 25, 2025 at 11:19 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 111 - Anode: 92 VD Pre STK > VD - Cathode: 03 - Anode: 15 VD Post STK > Stacking - Cathode: 125 - Anode: 116 Thank you ! April 25, 2025 at 11:22 AM, Mr.Miti (미티) FA : Yes April 25, 2025 at 11:25 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA @KIM SEYEON [김세연]_FA 피엠님 양극 노칭 로봇#2 P12포트 음극 공매거진이 출고 되었습니다. 확인 부탁드립니다 April 25, 2025 at 11:26 AM, 방혁 PM(Bang.Hyuk) FA : 확인하겠습니다 April 25, 2025 at 11:49 AM, Nguyên : CA NC GF is difficult to rell when it can be operated. Currently we have no rell to produce. April 25, 2025 at 11:54 AM, duzzaman Md (MCS) : The STK's are OOS Maintainance work is ongoing. April 25, 2025 at 11:57 AM, 방혁 PM(Bang.Hyuk) FA : @Mr.Miti (미티) FA Can you check E0STKC52 C02?? April 25, 2025 at 11:58 AM, Mr.Miti (미티) FA : Yes I here April 25, 2025 at 11:59 AM, 방혁 PM(Bang.Hyuk) FA : Thank you April 25, 2025 at 12:02 PM, Mr.Miti (미티) FA : Solved April 25, 2025 at 12:52 PM, Barta Rudi : The cathode reels are coming very slowly, the lines will stop like this. Could you adjust the priority so we receive the reels faster? @duzzaman Md (MCS) @FA April 25, 2025 at 12:54 PM, Sazzad Bhai SKon : We're monitoring April 25, 2025 at 12:57 PM, Sazzad Bhai SKon : Which line? April 25, 2025 at 12:59 PM, Barta Rudi : 4,5,6 April 25, 2025 at 1:00 PM, Khaliun/Ivancsa FA : @fa tech pls check VD AN72 Crane April 25, 2025 at 1:03 PM, Sazzad Bhai SKon : E0STKC51 crane is oos. April 25, 2025 at 1:05 PM, Sazzad Bhai SKon : There are enough transport orders for this line April 25, 2025 at 1:07 PM, Barta Rudi : There have been tasks so far, however, even before the crane stopped, the reels were arriving very slowly. The 4th and 5th lines are no longer producing, we are waiting for the reels.☹️ April 25, 2025 at 1:28 PM, 김수민 : 매니저님 작업은 끝난건가요? April 25, 2025 at 1:33 PM, 김수민 : @KIM SEYEON [김세연]_FA 피엠님 양극 릴창고 크레인 테스트 점검 진행중이라고 하는데 확인 부탁드립니다 April 25, 2025 at 1:47 PM, Eduard SL Shift A : line 5-6 ST slow delivery CA AN magazine April 25, 2025 at 1:49 PM, 김수민 : - 자동화 물류 릴창고 크레인 지속 에러로 인한 업체 크레인점검 진행, 양극 릴 공급지연 설비정지 4-1 12:47~ 4-2 12:57~ 4-3 12:30~ 5-1 12:02~ 5-2 13:34~ 5-3 12:02~ 6-1 13:32~ 6-2 13:27~ 6-3 13:33~ April 25, 2025 at 1:56 PM, duzzaman Md (MCS) : Everything seems okay. There are jobs/LR However, C1STKA72 Crane was out of service. This is why it got slowed down. April 25, 2025 at 2:00 PM, Eduard SL Shift A : C1STKA72 Crane still doesn't work April 25, 2025 at 2:02 PM, Eduard SL Shift A : SC 88 fork#1 center error During movement April 25, 2025 at 2:02 PM, Eduard SL Shift A : Please check April 25, 2025 at 2:03 PM, duzzaman Md (MCS) : @FA Kindly check. This is seriously causing delay for Stacking materials. Thanks April 25, 2025 at 2:06 PM, Eduard SL Shift A : at the moment on AN ports. no magazine is coming April 25, 2025 at 2:07 PM, Eduard SL Shift A : St April 25, 2025 at 2:09 PM, duzzaman Md (MCS) : Due to Crane problem materials are not moving. For example, if the Crane works, only then the materials will be transferred to p04,p08,p12 and from there to the lines. Thanks April 25, 2025 at 2:13 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 후창고 확인 부탁드립니다. April 25, 2025 at 2:15 PM, 방혁 PM(Bang.Hyuk) FA : 이동중입니다 April 25, 2025 at 2:18 PM, KIM SEYEON [김세연]_FA : 생산에 차질을 드려 죄송합니다. 점검이 되어야 더 빨리 릴 공급이 가능하여 우선 빨리 점검하겠습니다. @김수민 @심재훈 April 25, 2025 at 3:02 PM, 김민수 left this chatroom. April 25, 2025 at 3:06 PM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_121 there is data missmatch error and it is blocking materials. Thank you! April 25, 2025 at 3:30 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot April 25, 2025 at 3:33 PM, duzzaman Md (MCS) : This message was deleted. April 25, 2025 at 3:35 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 126 - Anode: 73 VD Pre STK > VD - Cathode: 00 - Anode: 32 VD Post STK > Stacking - Cathode: 114 - Anode: 122 Thank you! April 25, 2025 at 4:05 PM, Nguyên : CA NC GF Reel port M03 M05 M06 is faulty please check for me April 25, 2025 at 4:10 PM, Nguyên : CA GF NC No reel. please check my inventory April 25, 2025 at 4:16 PM, duzzaman Md (MCS) : No lot available. STK is out of service as well since 15:20, Open door April 25, 2025 at 5:02 PM, 김수민 : @KIM SEYEON [김세연]_FA 피엠님 이거 아직 그대로 입니다. April 25, 2025 at 5:05 PM, 방혁 PM(Bang.Hyuk) FA : 인원 이동중입니다 April 25, 2025 at 5:12 PM, 방혁 PM(Bang.Hyuk) FA : 추가조사 필요해보여 제어팀 추가로 요청했습니다. April 25, 2025 at 5:23 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA AN VD 전창고 UP20, DP19 포트에 실매거진 멈춰있습니다. 확인부탁드립니다 April 25, 2025 at 5:29 PM, 김수민 : 정정합니다 1F AN VD입니다 April 25, 2025 at 5:38 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) ) please share available lot April 25, 2025 at 5:41 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 154 - Anode: 89 VD Pre STK > VD - Cathode: 03 - Anode: 26 VD Post STK > Stacking - Cathode: 121 - Anode: 1 Thank you! April 25, 2025 at 5:42 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 154 - Anode: 89 VD Pre STK > VD - Cathode: 03 - Anode: 26 VD Post STK > Stacking - Cathode: 121 - Anode: 122 Thank you! April 25, 2025 at 5:51 PM, 김수민 : - 자동화 물류 릴창고 크레인 지속 에러로 인한 업체 크레인점검 진행, 양극 공급지연 설비정지 4-1 12:47~15:15, 15:35~ 4-2 12:57~15:20, 4-3 12:30~15:15, 15:48~ 5-1 12:02~15:10, 15:41~ 5-2 13:34~15:15, 16:35~ 5-3 12:02~15:15, 15:36~ 6-1 13:32~15:20, 16:10~ 6-2 13:27~15:15, 16:10~ 6-3 13:33~15:18, 16:10~ April 25, 2025 at 5:53 PM, Andrea Zentay : @FA AN 4/3: the magazine coming out of the machine stopped without an error message. We need help. April 25, 2025 at 6:10 PM, KIM SEYEON [김세연]_FA : 이제 다시 가동합니다. 생산에 차질을 드려 죄송합니다. April 25, 2025 at 6:19 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+2/12+1 Tech, 1Sl Overtime(2): Novák Zoltán, Zsurbej Zsolt Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Zsurbej Zsolt --------------- Assy 1F (4): Böröczki Balázs, Takács Ádám, Pintye Miklós, Novák Zoltán --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása vált April 25, 2025 at 6:20 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. Apr. 25 Time: 18:00~06:00 1. Jeong Woo-jun 2. Baek Ho-jong April 25, 2025 at 6:37 PM, Lan Nhi : @ FA sorry. plz check for me Out C/V 4/3 An. Nc has error, please help me fix it soon. thanks April 25, 2025 at 6:44 PM, Csanálosi Gábor FA : I am here at AN 4/3 and no errors April 25, 2025 at 6:45 PM, Csanálosi Gábor FA : Was in manual mode, i started in auto. April 25, 2025 at 6:54 PM, Lan Nhi : we cant start in auto mode. do you have any way to help me? can you go back to 4/3 and guide me because outline cant get the magazine out April 25, 2025 at 6:56 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA 노칭 An 4-3 PM모드 설정되어 있는데 뭐 작업 하시는건가요? 17:40~ 지금까지 설비 멈춰 있습니다 April 25, 2025 at 6:57 PM, Jun(정우준)_SKOH FA : 확인해보겠습니다 April 25, 2025 at 7:01 PM, Jun(정우준)_SKOH FA : GF NC AN4-3 해당포트는 바닥 단차 등이슈로, AGV오작동으로 전도 될 수 있어, 포트 막아둔 상태입니다. @Noémi (소미) April 25, 2025 at 7:02 PM, 이한웅(삼구) : 근데 해당 포트에 매거진이 있는데 옆에 포트는 사용 가능한거죠? April 25, 2025 at 7:05 PM, KIM SEYEON [김세연]_FA : 네 옆에 포트는 사용 가능합니다. 해당포트 매거진 놓은건 그래야 AGV가 그포트에 못오기 때문입니다. April 25, 2025 at 7:08 PM, Csanálosi Gábor FA : Magazines moved manually to the working port, and after reset, the maschine is working again. Thx for samkoo assist. April 25, 2025 at 7:35 PM, 이한웅(삼구) : PM 모드에서 한개 포트만 사용 가능한게 맞나요? 6개 매거진 채워지고 AGV가 가져간 후 다음 매거진이 버퍼에서 멈춰 있습니다.... April 25, 2025 at 7:36 PM, 이한웅(삼구) : Pass 모드로 변경해서 사용해봐도 될까요? April 25, 2025 at 7:41 PM, Jun(정우준)_SKOH FA : 잠시만요~ 금방 가겠습니다 April 25, 2025 at 7:42 PM, 이한웅(삼구) : 네 알겠습니다. April 25, 2025 at 8:15 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD AN #30(4-3) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. April 25, 2025 at 8:18 PM, 이한웅(삼구) : NC Ca RTV 작동중인건가요? April 25, 2025 at 8:24 PM, Jun(정우준)_SKOH FA : 지금 가동중입니다 April 25, 2025 at 9:14 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 GF 양극 비가동이 너무 길어서 수동 출고 몇개만 하겠습니다. April 25, 2025 at 9:25 PM, Csanálosi Gábor FA : @manufacturing CA 72 manual port has a plate and no carrier id, take out and load it again please. April 25, 2025 at 9:27 PM, Csanálosi Gábor FA : @M.Ferenc "B"Nc/Vd SL légyszi April 25, 2025 at 9:31 PM, M.Ferenc "B"Nc/Vd SL : Megyek megnézem. April 25, 2025 at 9:35 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 Ca RTV 똑같은 위치에서 무언 정지 같은데 확인 부탁드립니다. April 25, 2025 at 9:35 PM, Csanálosi Gábor FA : Köszönöm, látom sikerült <3 April 25, 2025 at 9:36 PM, M.Ferenc "B"Nc/Vd SL : Igen. Megvan. April 25, 2025 at 9:37 PM, Jun(정우준)_SKOH FA : 네, 알겠습니다. April 26, 2025 at 12:50 AM April 26, 2025 at 12:50 AM, Jun(정우준)_SKOH FA : @Shahbaz 샤바즈 MCS/RTD how can I stopped Load request at the E0CNVC52_BP10? April 26, 2025 at 12:51 AM, Debreczeni Ármin : Hello please share lot quantity, thank you! April 26, 2025 at 12:52 AM, Shahbaz 샤바즈 MCS/RTD : Is there any issue with the port? April 26, 2025 at 12:53 AM, Jun(정우준)_SKOH FA : yes, there is a communication problem with the RTV car with the port. so sometimes stopped RTV without any error alarm. April 26, 2025 at 12:59 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 227 - Anode: 126 VD Pre STK > VD - Cathode: 02 - Anode: 03 VD Post STK > Stacking - Cathode: 44 - Anode: 122 Thank you! April 26, 2025 at 1:03 AM, Shahbaz 샤바즈 MCS/RTD : So, for now, can we turn off the dispatching to prevent creating any transfers to that port, if necessary, until it is fixed? April 26, 2025 at 1:05 AM, Jun(정우준)_SKOH FA : yes. please turn off any transfer at the E0CNVC52_BP10 port. April 26, 2025 at 1:08 AM, Shahbaz 샤바즈 MCS/RTD : Currently there is a pending job and is on the way. April 26, 2025 at 3:45 AM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD i took out from C1CNV71 P8043 (ca yaskawa 2) an empty plate (MLC2116) Hoping after the robot will work. (It didnt. :( ) anyhow, pls notice that plate is out. April 26, 2025 at 3:52 AM, Shahbaz 샤바즈 MCS/RTD : Okay, MLC2116 data is already removed and currently MLC3038 moved to C0PVC020_P02 according to log. April 26, 2025 at 3:53 AM, Csanálosi Gábor FA : Yes indeed, i deleted as usual whats necessary. Thanks. April 26, 2025 at 4:15 AM, Debreczeni Ármin : Can you refresh please? April 26, 2025 at 4:16 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 229 - Anode: 119 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 10 - Anode: 140 April 26, 2025 at 4:20 AM, Debreczeni Ármin : Thanks April 26, 2025 at 4:23 AM, Debreczeni Ármin : Ca reels are coming normally now? St storage CA no crane issue? April 26, 2025 at 4:44 AM, Szücs Géza FT-B : minden Roll raktár hibamentes April 26, 2025 at 4:44 AM, Szücs Géza FT-B : Reel* April 26, 2025 at 4:45 AM, Rácz Dániel / FA : Jelenleg a roll raktárak is April 26, 2025 at 4:46 AM, Rácz Dániel / FA : Jelenleg a reel raktárak és a conveyorok is April 26, 2025 at 4:48 AM, Debreczeni Ármin : Köszönöm szépen April 26, 2025 at 5:24 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA 4-3 machine. Agv #3 picked up full magazines incorrectly. Please check. April 26, 2025 at 6:05 AM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Travel driver error and beacause of it CA Reels delivery has been stopped. Thank you very much! April 26, 2025 at 6:26 AM, P.Bence A SSL : @Mohammad Amir please check NC GF Ca reel warehouse very slow .. April 26, 2025 at 6:27 AM, Mohammad Amir : @FA Please check E0CNVC52 _RTV 01 there is CV01 Run Time over alarm and it has blocked reels delivery. Thank you very much! April 26, 2025 at 6:28 AM, Mohammad Amir : Morning, There was issue with warehouse STKC51 but it is fixed now and now there is issue with CNVC52 that's why reels delivery stucked now ,i already informed FA team as soon as CNV will be fixed reels delivery will continue. I am monitoring. Thank you very much! April 26, 2025 at 6:30 AM, Khaliun/Ivancsa FA : @fa tech NC AN Robot#1 error pls check April 26, 2025 at 6:54 AM, P.Bence A SSL : The error needs to be resolved as soon as possible because 3 lines are currently producing and reel supply is important. April 26, 2025 at 6:55 AM, Mohammad Amir : @FA Please check this error on priority as there is shortage of reels. Production is getting affected. Thank you very much! April 26, 2025 at 7:03 AM, Mohammad Amir : For your information, Issues with CNV and STK have been resolved ✅. Now reels are on the way. If you need reels urgently, please inform me I will give priority to CA reels delivery. Thank you very much! April 26, 2025 at 7:09 AM, 김수민 : Plz recheck April 26, 2025 at 7:12 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 237 - Anode: 117 VD Pre STK > VD - Cathode: 03 - Anode: 01 VD Post STK > Stacking - Cathode: 00 - Anode: 122 April 26, 2025 at 7:12 AM, Mohammad Amir : @김수민 ,Sir for your information! April 26, 2025 at 7:56 AM, P.Bence A SSL : C1CNVX71-CV03 robot not move please check GF Nc Ca .. April 26, 2025 at 8:13 AM, P.Bence A SSL : Ca reel warehouse very slow please check thank you . April 26, 2025 at 8:14 AM, Mohammad Amir : There was issue with STKC51 ,now issue has been resolved ✅. CA Reels on the way. If you need CA reels urgently for production,please inform me ,I will give priority . Thank you! April 26, 2025 at 8:16 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV 01 is OOS and this is blocking reels CA delivery. Thank you very much! April 26, 2025 at 8:28 AM, Ynja/ivancsa FA : Good morning @MCS VD CA chamber 4-8 please check it Half chamber. Thank u. April 26, 2025 at 8:28 AM, Mohammad Amir : Checking April 26, 2025 at 8:30 AM, Mohammad Amir : There is an active LR at 8:17 as soon as materials will be available jobs will be created for remaining half chamber. Thank you very much! April 26, 2025 at 8:32 AM, Mohammad Amir : @FA Please check MLC3224 located at C1STKC72_P03 it is not moving since 7:34 and it is blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! April 26, 2025 at 8:36 AM, Ynja/ivancsa FA : checking April 26, 2025 at 8:39 AM, 김수민 : @KIM SEYEON [김세연]_FA GF 양극 노칭 ROBOT#1 P11 포트 ROBOT#2 P11, P14 포트 ROBOT#3 P14 포트 전부 풀매거진 6개 채워져있는데 로봇이 빈 플레이트로 이송 작업 안해주고 있습니다. 그렇다보니 실매거진 - 공매거진 순환이 안되어 정지한 설비 발생중입니다. 확인 부탁드립니다. April 26, 2025 at 8:40 AM, Ynja/ivancsa FA : solved April 26, 2025 at 8:41 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check April 26, 2025 at 8:41 AM, Mohammad Amir : Thank you very much! April 26, 2025 at 8:42 AM, 김수민 : @KIM SEYEON [김세연]_FA 5-2 08:07~ 6-3 08:39~ April 26, 2025 at 8:42 AM, Mohammad Amir : @FA Please check CA Gantry Robot #1 and #2 it is OOS. That's why all the full magazine are transffering to Robot#3 CA and there is lack of Empty magazine in NC CA. Thank you very much! April 26, 2025 at 8:44 AM, 김수민 : AGV#1,6,9,10 전부 풀메거진 채워진 상태로 해당 문제로 포트 투입 못하고 있습니다. April 26, 2025 at 8:44 AM, Mohammad Amir : AGVs #1,#2,#3,#4,#7,#9,#10 are in the queue to deliver full magazine at Robot #3 CA P11 and P14 ports. Resulting there is just few AGVs available for empty magazine jobs. Thank you! April 26, 2025 at 8:46 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check this issue on priority. As i checked ROBOT #1 and #2 CA Gantry are in Manual mode that's why it is OOS. Thank you very much! April 26, 2025 at 8:57 AM, Nguyên : CA NC CA no MGZ please check for me April 26, 2025 at 9:00 AM, Mohammad Amir : There were issues with Robot #1 and #2 that's why there is delay in empty magazine for NC CA. However now issue has been resolved with Robot #2 ✅. And there are Empty magazine jobs exists for NC CA 4-1 AGV#1 on the way. For 4-2 AGV#7 in the way. For 5-3 ,Empty magazine job also created. As soon as Robot #1 will also be fixed empty magazine delivery speed will increase. Thank you very much! April 26, 2025 at 9:29 AM, 김수민 : 6-1 09:20~ 6-2 09:21~ 6-3 08:39~08:46, 09:19~ 5-3 09:03~ 5-2 08:07~ 5-1 09:07~ 4-3 08:36~ April 26, 2025 at 9:31 AM, KIM SEYEON [김세연]_FA : 양극 노칭 포트 문제가 아직 해결이 안된건가요? April 26, 2025 at 9:37 AM, 김수민 : 해결은 된 것으로 보입니다. 그동안 밀린 작업이 많아 AGV 정상 순환까지는 설비 비가동이 추가로 발생할 것으로 예상됩니다. April 26, 2025 at 9:37 AM, KIM SEYEON [김세연]_FA : 네 알겠습니다. April 26, 2025 at 10:15 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please check available lot April 26, 2025 at 10:15 AM, Mohammad Amir : Checking Sir! April 26, 2025 at 10:17 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 233 - Anode: 114 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 07 - Anode: 140 Thank you very much! April 26, 2025 at 10:17 AM, KIM SEYEON [김세연]_FA : how many ca plates in the vd chamber? April 26, 2025 at 10:18 AM, Mohammad Amir : Sir, There are only two Cathode plates in for VD. Thank you very much! April 26, 2025 at 10:57 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C01 there is Travel driver error and beacause of it CA Reels delivery has been stopped. Thank you very much! April 26, 2025 at 11:06 AM, Mohammad Amir : This message was deleted. April 26, 2025 at 11:07 AM, Nguyên : GF CA NC reel out very slow please check for me April 26, 2025 at 11:08 AM, Mohammad Amir : STKC51 is still under maintenance that's why you are witnessing delay. I will keep you updated. Thank you! April 26, 2025 at 11:10 AM, Mohammad Amir : Iasue has been resolved ✅. Ca Reels are on the way. Thank you very much! April 26, 2025 at 11:10 AM, Mr.Miti (미티) FA : Its very fast… April 26, 2025 at 11:12 AM, Mohammad Amir : Yes at the moment now E0STKC51 has been normalised ✅. However since morning there is issue with this STK and it is going In-service and Out of service that's why CA reels delivery is slow. Thank you very much! April 26, 2025 at 11:14 AM, Mr.Miti (미티) FA : I work down here too, I see what's happening and even experience it. Do you have any accurate information or did you just see it in the MCS that it started? April 26, 2025 at 11:18 AM, Mohammad Amir : As i have checked from the Log analysis ,Travel driver error and carriage balance abnormal error in E0STKC51_C01 is happening quite frequently and it is causing reels Delivery delay majorly. Thank you very much! April 26, 2025 at 11:24 AM, Mr.Miti (미티) FA : Thank you very much! April 26, 2025 at 11:24 AM, Mohammad Amir : You are welcome! April 26, 2025 at 11:58 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 236 - Anode: 121 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 00 - Anode: 137 Thank you very much! April 26, 2025 at 1:27 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 227 - Anode: 120 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 02 - Anode: 141 Thank you very much! April 26, 2025 at 1:41 PM, Mohammad Amir : @Nagy Tibor @FA @Skwarek Tibor Please check E0STKC51_C02 ,there is Fork#1 Load Position Error when Active . Thank you! April 26, 2025 at 2:12 PM, Mohammad Amir : @Skwarek Tibor Please check C1STKC71_C01 there is SCP Main Power CP trip error. Thank you! April 26, 2025 at 2:24 PM, Barta Rudi : . April 26, 2025 at 2:37 PM, Mohammad Amir : @FA @Nagy Tibor @Skwarek Tibor ***Important*** There is Fire watch error in E0STKC52_C01 /C02 , please check it. Thank you very much! April 26, 2025 at 2:41 PM, Mohammad Amir : Fire watch error in E0STKA51/52_C01/C02 as well, please check it on priority. Thank you very much! April 26, 2025 at 2:43 PM, Mr.Miti (미티) FA : Checking April 26, 2025 at 2:44 PM, Mohammad Amir : Thank you very much! April 26, 2025 at 2:59 PM, Mohammad Amir : @FA @Nagy Tibor Please check this issue exists since 14:11. Thank you very much! April 26, 2025 at 3:01 PM, 방혁 PM(Bang.Hyuk) FA : Solved April 26, 2025 at 3:02 PM, Mohammad Amir : Thank you very much Sir! 🙏 April 26, 2025 at 3:06 PM, 김수민 : @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA 양극 노칭 매뉴얼 포트 1번 릴출고중 트레이가 전도 되었습니다. 확인부탁드립니다 April 26, 2025 at 3:07 PM, 방혁 PM(Bang.Hyuk) FA : 갈게요 April 26, 2025 at 3:09 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 225 - Anode: 124 VD Pre STK > VD - Cathode: 03 - Anode: 03 VD Post STK > Stacking - Cathode: 00 - Anode: 152 Thank you very much! April 26, 2025 at 3:16 PM, Khaliun/Ivancsa FA : @fa tech C1STKC71,C1STKC72 error pls check April 26, 2025 at 3:16 PM, Mohammad Amir : @FA @Nagy Tibor @Mr.Miti (미티) FA Please check this issue exists since 14:11. Thank you very much! April 26, 2025 at 3:44 PM, Nguyên : NC CA GF Robot#2 Error Come check for me April 26, 2025 at 3:47 PM, Ynja/ivancsa FA : @Mohammad Amir Please Check destination MLC4096 at C1CNV072_P16. Also Can you create destination April 26, 2025 at 3:47 PM, Mohammad Amir : Checking April 26, 2025 at 3:52 PM, Mohammad Amir : It already have a job to go to C1CNV072_P07. Everything is good from MCS/RTD side. ✅ Please check physically. If you need anymore assistance please contract me. Thank you very much! April 26, 2025 at 4:08 PM, Ynja/ivancsa FA : Previously, the destination was not visible from CCS side, but now the issue has been resolved. Thank you April 26, 2025 at 4:09 PM, Mohammad Amir : You are welcome! April 26, 2025 at 4:09 PM, 김수민 : @심재훈 EC1P073F4456114A(QC NG, 현장보관중) - 양극 릴 창고에서 해당 릴 출고 중 트레이 채 전도 발생. - M01 매뉴얼 포트로 출고 중 화재 알람이 발생하여 포트 내 차단막 하강, 화재 알람 종료. 이후 NC SL 차단막을 수동으로 상승시키는 과정에서 트레이 채 전도 발생. April 26, 2025 at 4:10 PM, 심재훈 : 쉬프트리더에게 이슈리포트 발행 요청 부탁 드립니다 April 26, 2025 at 4:10 PM, Ynja/ivancsa FA : C1STKC71’crane error pls check it April 26, 2025 at 4:14 PM, 방혁 PM(Bang.Hyuk) FA : Solved April 26, 2025 at 4:15 PM, Mr.Miti (미티) FA : Thank you April 26, 2025 at 4:16 PM, 김수민 : 네 알겠습니다. 차단막이 내려갔을 때에는 건드리지 말고, FA팀의 확인 및 조작을 통해 처리하도록 물류 작업자와 리더들에게 교육하겠습니다. 해당 내용은 김세연피엠님과 이야기 했습니다. April 26, 2025 at 4:19 PM, Mohammad Amir : @Mr.Miti (미티) FA Please check C1STKA72 _C01 there is ready off during Forking error. Thank you! April 26, 2025 at 4:20 PM, 방혁 PM(Bang.Hyuk) FA : On my way April 26, 2025 at 4:20 PM, Mohammad Amir : Thank you very much sir.🙏 April 26, 2025 at 4:22 PM, 방혁 PM(Bang.Hyuk) FA : Solved April 26, 2025 at 4:46 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 231 - Anode: 121 VD Pre STK > VD - Cathode: 02 - Anode: 00 VD Post STK > Stacking - Cathode: 00 - Anode: 138 Thank you very much! April 26, 2025 at 5:31 PM, 김수민 : - 자동화물류 양극 노칭 로봇 포트 에러 인한 공매거진 및 실매거진 순환 불가, 설비정지 6-1 09:20~09:40 6-2 09:21~10:03 6-3 08:39~08:46, 09:19~09:55 5-3 09:03~09:44 5-2 08:07~10:00 5-1 09:07~09:42 4-3 08:36~09:55 - 자동화 물류 릴창고 양극 릴 공급지연 및 릴 트레이 전도 발생 조치로 크레인 비가동 발생 4/1 15:46-16:57 4/2 15:19~ 4/3 14:58~ 5/1 16:09~16:44, 17:09~ 5/2 15:56~16:42 5/3 15:09~16:35, 17:16~ 6/2 16:49~17:12 April 26, 2025 at 6:06 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CA Reel RTV C52 “Laser Sensor Fault “ Thank you April 26, 2025 at 6:11 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 26, 2025 at 6:15 PM, 안종수 : NC RTV Error. Please check April 26, 2025 at 6:18 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check AN Reel conveyor A52 “Data mismatch error“ Thank you April 26, 2025 at 6:20 PM, Dariimaa/다리마/Ivancsa : Solved April 26, 2025 at 6:22 PM, 안종수 : Thank you April 26, 2025 at 6:39 PM, 전 운 (Jeon Woon) : GF CA 건조분 부족으로 4Line Stack 설비 정지 및 CA 잔량 5,6Line 투입하도록 하겠습니다. April 26, 2025 at 6:42 PM, Shahbaz 샤바즈 MCS/RTD : @FA The AN reel trays are not moving to the A52 stocker from A51 conveyor. please check. Thank you April 26, 2025 at 6:50 PM, 전 운 (Jeon Woon) : GF C1CNV072 M02 Port Data Delete PLZ @Dariimaa/다리마/Ivancsa April 26, 2025 at 6:52 PM, Dariimaa/다리마/Ivancsa : Solved April 26, 2025 at 7:13 PM, 전 운 (Jeon Woon) : @FA GF C1CNV072 M02 Port Can you please confirm that it is not working. April 26, 2025 at 7:14 PM, Csanálosi Gábor FA : I see no errors, the port is online. April 26, 2025 at 7:36 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot April 26, 2025 at 7:38 PM, Debreczeni Ármin : @Shahbaz 샤바즈 MCS/RTD Please share lot quantity thank you April 26, 2025 at 7:38 PM, 안진모 An Jin Mo invited 정은탁 (Jung EunTak). April 26, 2025 at 7:39 PM, 안진모 An Jin Mo invited 이도형 (Lee). April 26, 2025 at 7:40 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 254 - Anode: 135 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 00 - Anode: 140 Thank you April 26, 2025 at 7:56 PM, Dmytro Poluekto : This message was deleted. April 26, 2025 at 10:23 PM, Debreczeni Ármin : Can you send me new? Now enough vd post stk for me. April 26, 2025 at 10:25 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 251 - Anode: 140 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 21 - Anode: 163 Thank you April 26, 2025 at 10:34 PM, Debreczeni Ármin : @Szücs Géza FT-B Kéne egy kis segítség a p01es portnál April 26, 2025 at 10:34 PM, Debreczeni Ármin : C72 April 26, 2025 at 10:35 PM, Szücs Géza FT-B : pillanat April 26, 2025 at 10:35 PM, Debreczeni Ármin : Köszi April 26, 2025 at 10:41 PM, Szücs Géza FT-B : jelen April 26, 2025 at 10:42 PM, Debreczeni Ármin : A mongol hölgy megoldotta az előbb April 26, 2025 at 10:42 PM, Debreczeni Ármin : Egy hibát kellett törölni mert elkezdjük vissza tölteni az L4et April 26, 2025 at 10:42 PM, Debreczeni Ármin : Az meg ugye manuális (sobs) April 26, 2025 at 10:43 PM, Szücs Géza FT-B : ok April 27, 2025 at 12:40 AM April 27, 2025 at 12:40 AM, 전 운 (Jeon Woon) : Could you please update it again? April 27, 2025 at 12:44 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 251 - Anode: 134 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 0 - Anode: 151 Thank you April 27, 2025 at 12:46 AM, 전 운 (Jeon Woon) : Thx! April 27, 2025 at 1:44 AM, Debreczeni Ármin : Agv #9 stopped at AN vd April 27, 2025 at 3:02 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Reel stk C51 “Crane distance error “ Thank you April 27, 2025 at 3:06 AM, Rácz Dániel / FA : Boing April 27, 2025 at 3:07 AM, Rácz Dániel / FA : @Csanálosi Gábor FA 🦋 April 27, 2025 at 3:08 AM, Csanálosi Gábor FA : @Böröcz Tamás will boing. :D April 27, 2025 at 3:33 AM, M.Ferenc "B"Nc/Vd SL : @FA An empty carrier (LTA1511) stops on the conveyor on the way in at port M03 next to L4. Please check. April 27, 2025 at 3:34 AM, Csanálosi Gábor FA : Melyik conveyoron? April 27, 2025 at 3:37 AM, M.Ferenc "B"Nc/Vd SL : Kiadónál, rögtön a második conveyor. April 27, 2025 at 3:39 AM, Csanálosi Gábor FA : Kész, el volt akadva April 27, 2025 at 4:29 AM, Debreczeni Ármin : Could you send fresh status please? April 27, 2025 at 4:31 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 239 - Anode: 109 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 17 - Anode: 169 Thank you April 27, 2025 at 4:39 AM, Zulaa/졸라/Ivancsa FA : Fa@ VD AN crane error. C1STKA72 Fork 1 center error when first active. Pls check. April 27, 2025 at 4:53 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKC71 “load oversize error. Thank you April 27, 2025 at 4:59 AM, Kovács Ágnes : Solved April 27, 2025 at 5:26 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca reel stk C51 “Crane distance error “ Thanks April 27, 2025 at 6:05 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKC52_C02 Fork#2 Receive Data Error. Thank you very much! April 27, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— April 27, 2025 at 6:09 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_C01 it is inactive and because of this there is queue of materials on the recovery Conveyor. Thank you very much! April 27, 2025 at 6:11 AM, Mr.Miti (미티) FA : @Mohammad Amir Good Morning! Novák Károly dont work today. 🥲 But we checking (thumbsup) April 27, 2025 at 6:12 AM, Mohammad Amir : Well noted! Thank you very much! April 27, 2025 at 6:16 AM, Mr.Miti (미티) FA : Solved April 27, 2025 at 6:17 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 6:17 AM, Mr.Miti (미티) FA : You too! (beam) April 27, 2025 at 6:24 AM, Mohammad Amir : This message was deleted. April 27, 2025 at 6:24 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check this error still exists. Thank you very much! April 27, 2025 at 6:27 AM, Mr.Miti (미티) FA : Checking April 27, 2025 at 6:29 AM, Mr.Miti (미티) FA : Solved. April 27, 2025 at 6:29 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 6:31 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA 피엠님 음극 노칭 로봇#3 P13,14 포트로 공매거진 플레이트가 전창고에서 넘어오지 않고 있습니다. 확인 부탁드립니다. 풀매거진 6개 어제부터 전창고로 이송안되고 있습니다. 감사합니다 April 27, 2025 at 6:32 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 확인부탁드립니다. April 27, 2025 at 6:36 AM, 방혁 PM(Bang.Hyuk) FA : 확인하겠습니다 April 27, 2025 at 6:40 AM, Barta Rudi : Hi everyone. The cathode reel warehouse crane (E0STKC51_C01) is inactive, could someone take a look at it? Thank you. @FA April 27, 2025 at 6:40 AM, P.Bence A SSL : L6 stacking Agv 5 stop please check thank you ! April 27, 2025 at 6:41 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ PLEASE CHECK April 27, 2025 at 6:41 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0STKC51 _C01 there is Travel driver error. Thank you! April 27, 2025 at 6:51 AM, Mohammad Amir : Good morning Everyone, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 230 - Anode: 107 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 00 - Anode: 145 Thank you! April 27, 2025 at 7:08 AM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir ) Hello good morning amir C1STKA71_5089 ports, Empty magazine input command is not generated. Please check the MCS command status April 27, 2025 at 7:09 AM, Mohammad Amir : Good Morning Sir, Checking! April 27, 2025 at 7:09 AM, 방혁 PM(Bang.Hyuk) FA : Thanks! April 27, 2025 at 7:10 AM, Mohammad Amir : You are welcome Sir! April 27, 2025 at 7:20 AM, Mohammad Amir : Sir, Job is not getting created cause there is already a job for MLA2075 which doesn't move and that's why there is no further job is getting created. Could you please cancel MLA2075 job from SCS side as well. Thank you very much! April 27, 2025 at 7:21 AM, 방혁 PM(Bang.Hyuk) FA : But SCS don't have a job for MLA2075 April 27, 2025 at 7:21 AM, Mohammad Amir : Thank you very much for the confirmation Sir! April 27, 2025 at 7:22 AM, Mohammad Amir : Sir, I have resolved the issue ✅ Job has started to be created. Thank you very much! April 27, 2025 at 7:23 AM, 방혁 PM(Bang.Hyuk) FA : Thank you !! I checked April 27, 2025 at 7:23 AM, Mohammad Amir : You are welcome Sir! April 27, 2025 at 7:24 AM, 방혁 PM(Bang.Hyuk) FA : @김수민 이슈 해소되었습니다. C0PVA030_R01 호기 C0PVA030_P13 포트로 공매거진 투입 확인했습니다. 곧 풀매거진도 취급되어 전창고로 이동될겁니다! April 27, 2025 at 7:24 AM, Mohammad Amir : Empty Magazine has started to arrive at the O/P ports P13 ,P12 of Robot #3 AN. ✅ Please feel free to contact me again if you face any issue. Thank you very much! April 27, 2025 at 7:37 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Today as well E0STKC51 _C01 is having issues and that's why CA reels delivery is getting affected. Short summary of the error. 5:35 - Travel Driver Error. 6:26- Travel Driver Error. 6:33- Travel Driver Error. 6:44-Travel Driver Error. 6:53-Port Interface Error. 6:57-Port Interface Error. 6:58-Port Interface Error. 7:00-Port Interface Error. 7:04 -Port Interface Error. 7:28 -Port Interface Error. 7:32-Fork#1 Center Error when First Active. Please check E0STKC5 April 27, 2025 at 7:37 AM, Mr.Miti (미티) FA : We're on it! April 27, 2025 at 7:38 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 8:02 AM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir Can you check available lot for ST?? April 27, 2025 at 8:02 AM, Mohammad Amir : Sure Sir, Checking! April 27, 2025 at 8:03 AM, Mohammad Amir : Sir, Available Stacking Materials:- Cathode -04 Anode -133 Thank you very much! April 27, 2025 at 8:04 AM, 방혁 PM(Bang.Hyuk) FA : Thank you! April 27, 2025 at 8:04 AM, Mohammad Amir : You are welcome Sir! April 27, 2025 at 8:31 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Please check C1CNV071_12_015(Anode side) there is Data Mismatch error. Because of this recovery for MLA1083 is delaying. Thank you very much! April 27, 2025 at 8:34 AM, Yon Ko/연커/ : Solved. April 27, 2025 at 8:35 AM, Mohammad Amir : Thank you very much! April 27, 2025 at 9:22 AM, P.Bence A SSL : @Mohammad Amir please check the GF Ca reel warehouse it is very slow the production is slowly stopping which is a serious problem. April 27, 2025 at 9:32 AM, P.Bence A SSL : Can you tell me what the problem could be? April 27, 2025 at 9:32 AM, Mohammad Amir : Hello, There is constant issue with E0STKC51 since morning that's why you are witnessing this issue ,i already informed FA ,they are working on it. I am monitoring the process. Thank you very much! April 27, 2025 at 9:41 AM, Mohammad Amir : Unfortunately still E0STK51 is under maintenance. And because of this issue there is traffic of recovery carriers on E0CNVC52 and eventually RTV has stopped as it needs to deliver recovery material. Thank you very much! April 27, 2025 at 9:45 AM, 김수민 : - 자동화 물류 릴창고 크레인 에러로 인한 조치 및 비가동 발생, 양극 릴 공급지연 5/1 08:49~ 5/2 09:17~ 5/3 09:12~ 4/1 09:27-09:37 April 27, 2025 at 9:51 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 에러가 있는지 확인 부탁드립니다. April 27, 2025 at 10:02 AM, Mohammad Amir : @Mr.Miti (미티) FA @FA Are you still checking E0STKC51 ,it is still Out of service and because of this CA reels delivery has been stopped and production is getting affected. Thank you very much! April 27, 2025 at 10:03 AM, 김지수PM(Gyuri)_FA : 확인중에 있습니다. 주행속도 160m/min > 80m/min 변경하니 드라이브 에러는 줄었으나, 포크가 뻗어진 상태에서 해당 에러가 발생하고있어서 포크 원점잡고 조치하는데 시간이 걸립니다. April 27, 2025 at 10:04 AM, Mohammad Amir : Okay Sir, I understand. Thank you very much! 🙏 April 27, 2025 at 10:05 AM, Mr.Miti (미티) FA : Maybe with a value of 60? April 27, 2025 at 10:06 AM, 김지수PM(Gyuri)_FA : 80! April 27, 2025 at 10:08 AM, Mr.Miti (미티) FA : I understand April 27, 2025 at 10:37 AM, 김수민 : - 자동화 물류 릴창고 크레인 에러로 인한 조치 및 비가동 발생, 양극 릴 공급지연 6/1 10:09~ 6/2 10:35~ 6/3 10:14~ 5/1 08:49~ 5/2 09:17~ 5/3 09:12~ 4/1 09:27-09:37, 10:30~ 4/2 10:00~ 4/3 10:23~ April 27, 2025 at 10:49 AM, Mohammad Amir : @FA @Yon Ko/연커/ Please check C1STKA72_P02 it is OOS and because of this issue there is shortages of Anode stacking materials. Please check this issue on priority. Thank you very much! April 27, 2025 at 11:34 AM, Mohammad Amir : For you information, As of now E0STKC51 is back in service and reels CA delivery has been normalized ✅. I am monitoring. Thank you very much! April 27, 2025 at 11:47 AM, Mohammad Amir : @Mr.Miti (미티) FA Please check again E0STKC51 _C02 there is Crane distance error. Thank you! April 27, 2025 at 11:49 AM, 방혁 PM(Bang.Hyuk) FA : @Mr.Miti (미티) FA FA hello miti The necessary accessories and repair team will arrive soon. It's expected to be about two hours. Please take measures for crane errors until then. April 27, 2025 at 12:18 PM, K. József A SL L09 : L9 line. the AGVs are not working. please check April 27, 2025 at 12:20 PM, Mohammad Amir : This message was deleted. April 27, 2025 at 12:23 PM, Mohammad Amir : I have replied in 1F Chat group, Please check! Thank you very much! April 27, 2025 at 12:25 PM, K. József A SL L09 : I saw it. Thank you. April 27, 2025 at 12:25 PM, Mohammad Amir : You are welcome! April 27, 2025 at 12:45 PM, Barta Rudi : @FA VD Anode AGV 6 stop please check, thank you April 27, 2025 at 1:26 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 크레인 케이블 조치를 위해 30분만 비가동 하겠습니다. 추가 작업시간이 필요하면 말씀드리겠습니다. April 27, 2025 at 1:27 PM, 심재훈 : 네 알겠습니다. April 27, 2025 at 1:39 PM, K. József A SL L09 : This message was deleted. April 27, 2025 at 1:57 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 254 - Anode: 84 VD Pre STK > VD - Cathode: 02 - Anode: 01 VD Post STK > Stacking - Cathode: 06 - Anode: 170 Thank you! April 27, 2025 at 2:32 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 크레인은 13시50분부터 정상가동중입니다. 모니터링 하겠습니다. April 27, 2025 at 3:05 PM, Mohammad Amir : @FA @Yon Ko/연커/ Please check C1CNV072_16_144 there is Data mismatch error and it is blocking stacking materials delivery. Thank you very much! April 27, 2025 at 3:10 PM, Yon Ko/연커/ : Done. April 27, 2025 at 3:10 PM, Mohammad Amir : Thank you very much! April 27, 2025 at 3:17 PM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir ) @김수민 Repair work on E0STKC51 C01 has been completed. Travel drive error is unlikely to recur. Carriers are being supplied normally to the slitter area and notching area. April 27, 2025 at 3:18 PM, Mohammad Amir : Thank you very much Sir 🙏. April 27, 2025 at 3:24 PM, Yon Ko/연커/ : @Mohammad Amir Could you please check those half chambers? VD CA 5-1 and 5-5 thank u. April 27, 2025 at 3:24 PM, Mohammad Amir : Checking! April 27, 2025 at 3:26 PM, Mohammad Amir : For 5-5 VD CA:- LR received successfully for half chamber at 14:32 however currently there is not enough materials available as soon as materials will be available jobs will be created. For 5-1 VD CA:- Please press LR for P01 and P02 chamber. Thank you very much! April 27, 2025 at 3:27 PM, Mohammad Amir : @Yon Ko/연커/ @FA Please check C1STKA71_P21 and C11CNV071_12_028(Anode side) these ports are OOS that's why one job is pending for more than one hour. Thank you very much! April 27, 2025 at 3:31 PM, Yon Ko/연커/ : Working on it April 27, 2025 at 3:32 PM, Mohammad Amir : Thank you very much! April 27, 2025 at 3:32 PM, Barta Rudi : @Mohammad Amir Hello. No reels are arriving at lines 4 and 5. Could you please check it? Thank you. April 27, 2025 at 3:32 PM, Barta Rudi : Cathode April 27, 2025 at 3:33 PM, Mohammad Amir : Checking! April 27, 2025 at 3:39 PM, Mohammad Amir : Issue has been resolved ✅. Reels have started to arrive for Line -5. And on the way for line -4. Thank you very much! April 27, 2025 at 3:41 PM, Yon Ko/연커/ : Done. April 27, 2025 at 3:42 PM, Mohammad Amir : Thank you very much! April 27, 2025 at 4:33 PM, P.Bence A SSL : L6 stacking Agv 4 stop please check thank you ! April 27, 2025 at 4:34 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check April 27, 2025 at 4:47 PM, Andrea Zentay : @FA Szeretnék segítséget a NC AN 6/2 géphez. Úgy néz ki,valaki az ajtózárhoz nyúlt,így megállt a teli magazin továbbítás. Kösziönöm előre is. April 27, 2025 at 5:03 PM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir Hello good morning amir C1STKA71_5081 ports, Empty magazine input command is not generated. Please check the MCS command status April 27, 2025 at 5:03 PM, Mohammad Amir : Checking Sir! April 27, 2025 at 5:07 PM, Mohammad Amir : Issue has been resolved Sir ✅. Empty magazine command has started to generated again. Thank you very much! April 27, 2025 at 5:10 PM, 방혁 PM(Bang.Hyuk) FA : Thank you! April 27, 2025 at 5:11 PM, Mohammad Amir : You are welcome Sir. Please let me know if you need any further assistance. April 27, 2025 at 5:29 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot April 27, 2025 at 5:29 PM, Mohammad Amir : Checking Sir April 27, 2025 at 5:31 PM, 정은탁 (Jung EunTak) : - 자동화 물류 릴창고 크레인 에러로 인한 조치 및 비가동 발생, 양극 릴 공급지연 6/1 10:09~12:42 14:59~15:42 6/2 10:30~12:31 15:13~15:42 6/3 09:59-11:30 5/1 08:49~12:45 5/2 09:17~13:05 15:22~15:55 5/3 09:12~13:09 15:00~15:56 4/1 09:27-09:37 11:12~13:21 14:21~ 4/2 09:58~13:28 13:35~ 4/3 10:23~14:12 14:35~ April 27, 2025 at 5:32 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 275 - Anode: 76 VD Pre STK > VD - Cathode: 03 - Anode: 00 VD Post STK > Stacking - Cathode: 00 - Anode: 173 Thank you! April 27, 2025 at 5:41 PM, 정은탁 (Jung EunTak) : This message was deleted. April 27, 2025 at 5:41 PM, 정은탁 (Jung EunTak) : - 자동화 물류 릴창고 크레인 에러로 인한 조치 및 비가동 발생, 양극 릴 공급지연 6/1 10:09~12:42 14:59~15:42 6/2 10:30~12:31 15:13~15:42 6/3 09:59~11:30 5/1 08:49~12:45 5/2 09:17~13:05 15:22~15:55 5/3 09:12~13:09 15:00~15:56 4/1 09:27-09:37 11:12~13:21 13:45~17:05 4/2 09:58~13:28 13:35~17:25 4/3 10:23~14:12 14:35~17:10 April 27, 2025 at 6:06 PM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 22 (13003) It’s out of service . April 27, 2025 at 6:13 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11+1/12 Tech, 1Sl Overtime(1): Fabriczius Gergely Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Fabriczius Gergely, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő April 27, 2025 at 7:05 PM, VK (mcs) : @FA Please check Cathode Reel STK C51 LTC0387 (0201004) LTC0392 (0101104) LTC0784 (0200207) LTC1794 (0101005) These carrier’s job aborted by storage but still shelf status is ( retrieve reserved ) April 27, 2025 at 7:27 PM, VK (mcs) : Also please check Cathode Reel STK C52 buffer port 10 (60002) LTC0729 is not moving. April 27, 2025 at 7:36 PM, Böröcz Tamás : It has no job April 27, 2025 at 7:38 PM, VK (mcs) : Job already finished in STK C52 and should pass through bridge port to the C51 B10. Last destination is E0STKC51 -M03 April 27, 2025 at 7:39 PM, Böröcz Tamás : Okay April 27, 2025 at 7:39 PM, Böröcz Tamás : There is no error April 27, 2025 at 7:39 PM, Böröcz Tamás : Thanks for understanding April 27, 2025 at 7:40 PM, VK (mcs) : Yes thank you , there is no error but carrier is stopped. April 27, 2025 at 7:42 PM, Böröcz Tamás : Thank you April 27, 2025 at 8:16 PM, VK (mcs) : @FA Please check Anode post-STK A72 Light curtain detected. April 27, 2025 at 8:19 PM, Debreczeni Ármin : @VK (mcs) Hello please share lot quantity April 27, 2025 at 8:38 PM, VK (mcs) : Next LOT available Pre-STK> notching Anode : 81 cathode:290 Pre-STK > VD Anode:03 Cathode:01 Post-STK > stacking Anode:181 Cathode:00 April 27, 2025 at 10:24 PM, VK (mcs) : @FA Please check Cathode post-STK C72 port 22(13004) Output H/S off! April 27, 2025 at 10:28 PM, VK (mcs) : This message was deleted. April 27, 2025 at 10:29 PM, Böröcz Tamás : Solved April 27, 2025 at 11:00 PM, VK (mcs) : @FA Can you check Circular logistics conveyor C1CNV072 MLC2197 job canceled by OP action and it's just rotating April 27, 2025 at 11:41 PM, 안종수 : @FA Please check the NC CA #1 ROBOT April 27, 2025 at 11:43 PM, 안종수 : @FA Please check the NC CA #3 ROBOT April 27, 2025 at 11:58 PM, Lan Nhi : @FA plz check for me RTV/Ca not providing reel since 23:10. thanks April 27, 2025 at 11:59 PM, 안종수 : @FA 노칭 양극 릴 공급 부족으로 4,5라인 설비가 멈춰 있습니다. 언제쯤 원활하게 공급될까요? April 28, 2025 at 12:00 AM April 28, 2025 at 12:00 AM, 이주봉PM LEE JUBONG(FA) : 지금 나와있습니다 양극 릴창고 포트에 April 28, 2025 at 12:01 AM, 안종수 : 지금 출고하고 있습니다. April 28, 2025 at 12:09 AM, F.A.briczius Gergő : We didn't find problem on RTV. The transfer list is empty but it's in auto and works. All the cranes are working well, but the transfer list of C51 is long. April 28, 2025 at 12:12 AM, Lan Nhi : Yes April 28, 2025 at 12:13 AM, VK (mcs) : Please check cathode reel STK C51 Inactive stop April 28, 2025 at 12:19 AM, VK (mcs) : @FA Please check it out Cathode reel STK C51 Cranes are stopped April 28, 2025 at 1:27 AM, 김희용 : @FA Please Check E0STKC51 _ C02 Error - Fork#1 Load Position Error When Active April 28, 2025 at 1:28 AM, Rácz Dániel / FA : Going April 28, 2025 at 1:37 AM, 안종수 : @VK (mcs) Please manually release it to the port E0STKC51_M01~08 LTC0022 0060 1231 1630 0055 0011 0260 0471 April 28, 2025 at 1:39 AM, VK (mcs) : I will release them to ports 7 and 8 April 28, 2025 at 1:51 AM, Debreczeni Ármin : Sziasztok a ca reel raktár mikor lesz jó varhatóan? April 28, 2025 at 1:51 AM, Böröcz Tamás : Elvileg működik April 28, 2025 at 1:52 AM, Böröcz Tamás : Gyakorlatilag is úgy fest April 28, 2025 at 1:52 AM, Debreczeni Ármin : Köszi April 28, 2025 at 1:53 AM, Böröcz Tamás : Az SK fizesse meg 😇 April 28, 2025 at 1:54 AM, 안종수 : Thank you. Please give priority to GF CA reels. April 28, 2025 at 1:58 AM, VK (mcs) : Right now changing priority does not work due to large number of carriers on electrode side, but I will change for some after a few minutes. Thx April 28, 2025 at 1:59 AM, 안종수 : Please let me know when the shipment of 8 carriers is completed. Then I'll request another carrier to be shipped. April 28, 2025 at 2:14 AM, Lan Nhi : @FA plz.check for me machine #37(5-1) VD/CA agv can only put 2 pallets into the machine so the machine cannot operate to dry. thanks April 28, 2025 at 2:18 AM, VK (mcs) : Please send them back to post STK and apply again LR for all ports. April 28, 2025 at 2:24 AM, Lan Nhi : @FA Please transfer these license plates from VD CA 5/1 to KC72. April 28, 2025 at 2:47 AM, 안종수 : Please manually release it to the port E0STKC51_M01~08 LTC1522 1323 0051 0751 0215 0249 0389 0137 Please give priority to GF CA reels. Thank you 😊 April 28, 2025 at 3:18 AM, Debreczeni Ármin : Can you send me new status? Thank you April 28, 2025 at 3:27 AM, VK (mcs) : Next LOT available Pre-STK> notching Anode : 07 cathode:243 Pre-STK > VD Anode:02 Cathode:02 Post-STK > stacking Anode:252 Cathode:24 April 28, 2025 at 4:11 AM, VK (mcs) : All carriers released. April 28, 2025 at 4:17 AM, 안종수 : This message was deleted. April 28, 2025 at 4:17 AM, 안종수 : Thank you 😊. New Carrier NO. I'll send it to you. Please give priority to this as well and ship it. April 28, 2025 at 4:20 AM, 안종수 : I'll send it to you. But all recently produced reels are in stocker #2. It will take a while, but please ship it. April 28, 2025 at 4:22 AM, 안종수 : This message was deleted. April 28, 2025 at 4:22 AM, 안종수 : @VK (mcs) Please manually release it to the port E0STKC51_M01~08 LTC1660 0265 0103 0515 0408 1789 1161 1805 Please give priority to GF CA reels. Thank you 😊 April 28, 2025 at 5:42 AM, 안종수 : This message was deleted. April 28, 2025 at 5:42 AM, 안종수 : @VK (mcs) When the carrier is shipped, please ship the following carrier. Please manually release it to the port E0STKC51_M01~08 LTC1376 0772 0134 1614 1166 0335 0804 1087 Please give priority to GF CA reels. Thank you 😊 April 28, 2025 at 5:52 AM, 이한웅(삼구) : please check NC An #7 AGV April 28, 2025 at 5:54 AM, 최태영 : E0stkc51 M01~08 자재 확인 부탁드립니다~ April 28, 2025 at 5:57 AM, 안종수 : 네 5,6번 포트만 비어 있고 나머지 포트는 릴 나와 있습니다. 바로 출고하라고 하겠습니다. April 28, 2025 at 5:57 AM, VK (mcs) : Previous material has been released. And now we are creating jobs..Thx April 28, 2025 at 6:02 AM, 이한웅(삼구) : Please check E0STKC51 April 28, 2025 at 6:02 AM, Mohammad Amir : Good morning Sir, All mentioned materials have been transferred successfully ✅. I am giving priorities to GF CA reels. Thank you very much! April 28, 2025 at 6:03 AM, Mohammad Amir : @FA Please check E0STKC51_C02 there is ready off during Forking error. Thank you very much! April 28, 2025 at 6:03 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs Modul(3): Magyar Balázs, Nagy Gábor, Martina Dávid April 28, 2025 at 6:07 AM, 안종수 : Thank you so much. Have a nice day. April 28, 2025 at 6:07 AM, Mohammad Amir : You are welcome! You too have a nice day Sir! April 28, 2025 at 6:28 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 28 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 28, 2025 at 7:46 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 230 - Anode: 00 VD Pre STK > VD - Cathode: 03 - Anode: 03 VD Post STK > Stacking - Cathode: 09 - Anode: 258 Thank you! April 28, 2025 at 8:14 AM, Mohammad Amir : @Dániel Hufnágel Reels Available:- CA-65 AN-18 Thank you very much! April 28, 2025 at 8:14 AM, Dániel Hufnágel : Thank you April 28, 2025 at 8:14 AM, Mohammad Amir : You are welcome! April 28, 2025 at 8:19 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check UNKDUP carrier: UNKDUP-MLA3004-250416161756A (C1STKA72, 0205301) UNKDUP-MLA6044-2504246165514A (C1STKA72, 0100302) UNKDUP-MLC3138-250426091628A (C1STKC71, 0104504) UNKDUP-MLC3138-250426091628B (C1STKC71, 0205407) Thank you April 28, 2025 at 9:06 AM, 이한웅(삼구) : Please check NC An #1 Robot April 28, 2025 at 9:14 AM, Mohammad Amir : @Dániel Hufnágel Please check E0STKC51 _C02 there is Load Oversize error. Thank you! April 28, 2025 at 9:18 AM, Dániel Hufnágel : Slowly finished! April 28, 2025 at 9:18 AM, Mohammad Amir : Thank you very much! April 28, 2025 at 9:19 AM, 최정한.KOVA : VD AN 5-5 금일 06시30분경 히터 차단기 꺼짐 알람발생하였는데 히터 교체된건가요? LR 올려져있는데 차단기는 OFF 상태입니다. April 28, 2025 at 9:37 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check C1STKA71_P13/14 there is light curtain error,it is blocking materials delivery to 4-3 VD AN half chamber. Thank you very much! April 28, 2025 at 9:46 AM, Elena SL : @FA please check AGV#2 near L 4 April 28, 2025 at 10:07 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa @Manufacturing Please check 4-1 VD CA P01/02 for these chambers we received Unload completion report late that's why there is half chamber situation, please press LR for P01/02. Thank you very much! April 28, 2025 at 10:08 AM, Dariimaa/다리마/Ivancsa : Done April 28, 2025 at 10:08 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. @Dariimaa/다리마/Ivancsa Please check C1CNV072_16_079 there is data Mismatch error and because of this stacking materials delivery has been stopped. Please check this on priority. Thank you very much! April 28, 2025 at 10:08 AM, Mohammad Amir : Thank you very much! April 28, 2025 at 11:07 AM, 이민재 : Please check NC Ca #7 agv April 28, 2025 at 11:09 AM, Dariimaa/다리마/Ivancsa : Solved April 28, 2025 at 11:19 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot by hour April 28, 2025 at 11:19 AM, Mohammad Amir : Sure Sir,I will keep updating by hour. Thank you very much! April 28, 2025 at 11:21 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 216 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 21 - Anode: 287 Thank you very much! April 28, 2025 at 11:22 AM, KIM SEYEON [김세연]_FA : thank you April 28, 2025 at 11:22 AM, Mohammad Amir : You are welcome Sir! April 28, 2025 at 11:54 AM, 오세민(ST) : 6Line ST AGV2 error occurred April 28, 2025 at 11:55 AM, 오세민(ST) : Please check April 28, 2025 at 12:22 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 210 - Anode: 00 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 23 - Anode: 300 Thank you very much! April 28, 2025 at 12:28 PM, Péti Gábor : @Dániel Hufnágel Lassan indul az L4. Ki fogja nekünk kiszedni a raktárból az anyagot? April 28, 2025 at 12:30 PM, Dániel Hufnágel : Ez a rész már nem a mi feladat körünkbe tartozik, és létszámunk se engedi, ezt így ebben az esetben nektek kell megoldani April 28, 2025 at 12:30 PM, Péti Gábor : Rendben! Köszönöm szépen a választ!!! April 28, 2025 at 12:32 PM, Dániel Hufnágel : Igazán nincs mit April 28, 2025 at 1:09 PM, Mohammad Amir : @Dániel Hufnágel Please check E0STKC52_C01 there is MCP AP Error. Thank you! April 28, 2025 at 1:15 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 201 - Anode: 00 VD Pre STK > VD - Cathode: 00 - Anode: 03 VD Post STK > Stacking - Cathode: 25 - Anode: 303 Thank you very much! April 28, 2025 at 1:16 PM, 이민재 : Please check NC Ca #7 agv April 28, 2025 at 1:47 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD CA chamber 5-10 has only 2 carriers. Please check Thank you! April 28, 2025 at 1:48 PM, Mohammad Amir : Checking April 28, 2025 at 1:50 PM, Dariimaa/다리마/Ivancsa : Sorry 5-1 April 28, 2025 at 1:50 PM, Mohammad Amir : I think you mean 5-1, There is an active LR however currently there is no material available as soon as materials will be available jobs will created. Thank you very much! April 28, 2025 at 1:52 PM, Dariimaa/다리마/Ivancsa : Okay. Thank you! April 28, 2025 at 1:52 PM, Mohammad Amir : You are welcome! April 28, 2025 at 2:14 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA on Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 188 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 01 VD Post STK > Stacking - Cathode: 28 - Anode: 316 Thank you very much! April 28, 2025 at 2:29 PM, Mohammad Amir : @Dániel Hufnágel Please check E0STKC52_C02 there is Load Oversize Error. Thank you! April 28, 2025 at 2:55 PM, Dániel Hufnágel : @Mohammad Amir Can you check me how many empty magazines do we have for notching lines?(4-5-6) April 28, 2025 at 2:55 PM, Mohammad Amir : Checking April 28, 2025 at 2:56 PM, Mohammad Amir : AN -00 CA-182 April 28, 2025 at 2:57 PM, Dániel Hufnágel : Thank you ! April 28, 2025 at 2:59 PM, Mohammad Amir : You are welcome! April 28, 2025 at 3:08 PM, Cao thi my linh : in line 4 and line 5 anode we don’t have coil, line 6 reed is very slow please help us fix it April 28, 2025 at 3:09 PM, Mohammad Amir : Unfortunately there is no reels Available for Andoe 4-5-6 lines. Thank you very much! April 28, 2025 at 3:14 PM, Cao thi my linh : Yes April 28, 2025 at 3:21 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 177 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 03 VD Post STK > Stacking - Cathode: 32 - Anode: 313 Thank you very much! April 28, 2025 at 3:40 PM, 이민재 : Please check NC Ca #2 agv April 28, 2025 at 3:44 PM, 하연철(HA YEONCHEOL)/ : 음극 전 창고 Oven Plate 부족 Full Magazine 투입 지연 발생 음극 emptyempty oven plate 수동 투입 진행 (10EA) ID: MLA 4239 4113 4007 0158 1028 0089 4204 0176 3091 3068 April 28, 2025 at 3:59 PM, Ivan Kasian Sl 5L 🥹 : This message was deleted. April 28, 2025 at 4:05 PM, Yulya Kirsanova : Hello, we need help. C1CNV072-CV01-MCP . Tray Data Mismatch Error. April 28, 2025 at 4:05 PM, Yulya Kirsanova : @fa Thank you April 28, 2025 at 4:29 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 165 - Anode: 00 VD Pre STK > VD - Cathode: 02 - Anode: 01 VD Post STK > Stacking - Cathode: 48 - Anode: 315 Thank you very much! April 28, 2025 at 5:18 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 164 - Anode: 00 VD Pre STK > VD - Cathode: 03 - Anode: 03 VD Post STK > Stacking - Cathode: 52 - Anode: 317 Thank you very much! April 28, 2025 at 6:20 PM, QuangPhan : Hello! Good evening! @MCS Could you please check RTV - NC AN. We didn't received material since shift change. Thanks. April 28, 2025 at 6:23 PM, VK (mcs) : There is no available material April 28, 2025 at 6:25 PM, QuangPhan : Thank you so much April 28, 2025 at 6:50 PM, T. Gàbornè C SL NC : @Fa Hello Gyertek légyszíves CA 4#3-as géphez, kitöltési hiba van. Köszönöm szépen April 28, 2025 at 6:51 PM, QuangPhan : Hello! Good evening! @FA Could you please transfet these plates in VD AN 5/6 #42 to KA72 . The chamber has an error Left/Top NFB off state . Thank you April 28, 2025 at 7:08 PM, 안종수 : @FA Please check the #3AGV April 28, 2025 at 7:08 PM, 안종수 : NC CA April 28, 2025 at 7:09 PM, Nagy Tamás FA : Solved April 28, 2025 at 7:09 PM, Zaya/ivancsa FA : done April 28, 2025 at 7:12 PM, QuangPhan : Thank you April 28, 2025 at 7:13 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16100) Carrier is not moving. April 28, 2025 at 7:15 PM, Chinges Fa : Solved April 28, 2025 at 7:20 PM, VK (mcs) : @FA Cathode Reel STK C51 LTC0387 (0201004) LTC0392 (0101104) Please check shelf status. MCS generating a job for these carriers but due to some reason, it's alternated. April 28, 2025 at 8:03 PM, VK (mcs) : Next LOT available GF Pre-STK > Notching Anode:00 Cathode:157 Pre-STK > VD Anode:01 Cathode:01 Post -STK > Stacking Anode:310 Cathode:54 Reel STK > Notching Anode:00 Cathode:13 April 28, 2025 at 8:28 PM, T. Gàbornè C SL NC : @Fa Hello Please check CA reel Storage #51 stop machine Thx April 28, 2025 at 8:34 PM, T. Gàbornè C SL NC : @Fa Gyertek légyszíves CA 5#2géphez, kitöltési hiba miatt többször megáll a gép. Köszönöm szépen. April 28, 2025 at 8:57 PM, Yaroslav SL/C 6 line : Hello everyone @fa please check ST conveyor 4-6 line doesn’t work. Thanks April 28, 2025 at 9:15 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16081) Carrier is not moving. April 28, 2025 at 9:28 PM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA please check April 28, 2025 at 9:28 PM, KIM SEYEON [김세연]_FA : @Chinges Fa April 28, 2025 at 9:28 PM, Lajos Gábor F.A. : Work on it April 28, 2025 at 9:28 PM, KIM SEYEON [김세연]_FA : 👍 April 28, 2025 at 9:48 PM, T. Gàbornè C SL NC : Good Afternoon @MCS Please check CA Reel Storage #51. They don't come reels to line 4. ( port:M01, M02) Thank you very much. April 28, 2025 at 9:51 PM, VK (mcs) : STK C52 is busy, @FA Please check Cathode reel STK C52 MCP AP error! April 28, 2025 at 9:56 PM, Zaya/ivancsa FA : Solved, April 28, 2025 at 10:08 PM, T. Gàbornè C SL NC : @Fa Szeretnék segítséget kérni. CA VD mgz raktárhoz. Vissza akarunk küldeni 2 platet,de nem viszi el a gép. Rátudnátok nézni? Köszönöm szépen April 28, 2025 at 10:28 PM, Zaya/ivancsa FA : done April 28, 2025 at 10:38 PM, QuangPhan : Hello! @FA NC CA robot #3 error. Thanks April 28, 2025 at 11:01 PM, T. Gàbornè C SL NC : @Fa GF CA side, no move reels the Storage #51-52. Please check. Thx. April 28, 2025 at 11:02 PM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) 피엠님 확인 부탁드립니다. April 28, 2025 at 11:03 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check April 28, 2025 at 11:03 PM, Nagy Tamás FA : Solved April 28, 2025 at 11:03 PM, KIM SEYEON [김세연]_FA : 👍 April 28, 2025 at 11:40 PM, T. Gàbornè C SL NC : #Fa Please help CA @51 reel Storage. Tray move over time error. Thx April 28, 2025 at 11:57 PM, T. Gàbornè C SL NC : @MCS Reel's are coming very slowly on GF CA storege, could you help the priority? Thank you very much April 28, 2025 at 11:58 PM, VK (mcs) : Currently, there are many orders and STK is busy but I will change some priorities. April 29, 2025 at 12:11 AM April 29, 2025 at 12:11 AM, VK (mcs) : Next LOT available GF Pre-STK > Notching Anode:00 Cathode:147 Pre-STK > VD Anode:03 Cathode:02 Post -STK > Stacking Anode:287 Cathode:75 Reel STK > Notching Anode:00 Cathode:22 April 29, 2025 at 12:25 AM, QuangPhan : Hello! @MCS The reel is arriving very slowly on the GF AN archive. Please check for me. Thanks. April 29, 2025 at 12:27 AM, VK (mcs) : There is no material. Whenever material transferred to STK then it immediately assigned to Notching April 29, 2025 at 1:55 AM, T. Gàbornè C SL NC : @MCS Reel's are coming very slowly on GF CA storege, could you help the priority? Waiting for reels. Thank you very much April 29, 2025 at 1:56 AM, VK (mcs) : I will change April 29, 2025 at 1:57 AM, T. Gàbornè C SL NC : @FA Please check CA 4#1 machine, mgz loading error. Thx April 29, 2025 at 2:31 AM, Chinges Fa : Pleasa check c1stka71-p01-mcp vd ca April 29, 2025 at 2:35 AM, Chinges Fa : Pleasa check VD AN c1STKA71-p01-MCP April 29, 2025 at 2:39 AM, Nagy Tamás FA : Done April 29, 2025 at 3:20 AM, T. Gàbornè C SL NC : @MCS Reel's are coming very slowly on GF CA storege, could you help the priority? Waiting for reels. Thank you very much April 29, 2025 at 3:54 AM, T. Gàbornè C SL NC : @Fa Please check CA #51 reel Storage. Thx April 29, 2025 at 4:03 AM, QuangPhan : Hello! @FA NC AN AGV #4 error. Thanks April 29, 2025 at 4:05 AM, Yaroslav SL/C 6 line : @fa AGV5 stopped near 6 line ST#17 please check April 29, 2025 at 4:14 AM, Nagy Tamás FA : Solved April 29, 2025 at 4:25 AM, VK (mcs) : Next LOT available GF Pre-STK > Notching Anode:00 Cathode:137 Pre-STK > VD Anode:00 Cathode:00 Post -STK > Stacking Anode:295 Cathode:94 Reel STK > Notching Anode:00 Cathode:31 April 29, 2025 at 4:51 AM, Ivan Kasian Sl 5L 🥹 invited Lika. April 29, 2025 at 5:53 AM, QuangPhan : Hello! @FA NC AN AGV #10 error. Thanks April 29, 2025 at 5:56 AM, Simon Dávid D SL NC : @Mohammad Amir hello nagyon kevés a CA reel szükség lenne a CA reelekre,megnéznéd,köszönöm April 29, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+3 Overtime (3):Édl Tamás, Böröcz Tamás, Céhman Zsolt Sick (0):- Holiday (1):Novák Károly Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Oláh András, Céhman Zsolt Assembly(6): GF: Zsurbej Zsolt, Nagy Zsolt, Novák Zoltán 1F: Kovács Szabolcs , Kasztel Balázs,Böröcz Tamás Modul(4): Magyar Balázs, Nagy Gábor, Martina Dávid, Édl Tamás April 29, 2025 at 6:08 AM, duzzaman Md (MCS) : Good morning. There is no material. And some materials are on AGV. Also please check E0CNVC52_RTV01, Laser Sensor Fault Thanks ! April 29, 2025 at 6:29 AM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello szükségünk lenne CA reel,kevés reel van.köszönöm April 29, 2025 at 6:34 AM, Cao thi my linh : in line 4, 5, 6 AN we don't have any reed coils please help April 29, 2025 at 6:36 AM, Dániel Hufnágel : @duzzaman Md (MCS) Good morning! Please check aviable reels for notching, both anode and chatode side please April 29, 2025 at 6:37 AM, duzzaman Md (MCS) : GF NC CA: 31 AN: 00 April 29, 2025 at 6:43 AM, duzzaman Md (MCS) : Actually, there's a lot of order for the Crane. Thus, we are experiencing this delay. Everything else seems fine. I've increased priorities for some already. Thanks ! April 29, 2025 at 6:45 AM, KIM SEYEON [김세연]_FA : please take care of reel storage Crane carefully. April 29, 2025 at 7:14 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 29 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 29, 2025 at 7:24 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 143 - Anode: 17 VD Pre STK > VD - Cathode: 03 - Anode: 03 VD Post STK > Stacking - Cathode: 90 - Anode: 281 Thank you very much! April 29, 2025 at 7:25 AM, duzzaman Md (MCS) : GF NC Available lot CA: 25 AN: 00 April 29, 2025 at 8:17 AM, Simon Dávid D SL NC : @FA hello NC CA #2 AGV error,megnéznéd köszönöm April 29, 2025 at 8:32 AM, Cao thi my linh : In line 4,5,6 AN we are constantly out of reel stock, please help me April 29, 2025 at 8:34 AM, Dániel Hufnágel : We do not have aviable lot, automatic system is good now, working well! Now we an not do much more! April 29, 2025 at 8:34 AM, Dániel Hufnágel : Please share aviable lot for notching every hour please! April 29, 2025 at 8:38 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 139 - Anode: 08 VD Pre STK > VD - Cathode: 00 - Anode: 01 VD Post STK > Stacking - Cathode: 93 - Anode: 298 GF NC Available lot - CA: 27 - AN: 03 Thank you very much! April 29, 2025 at 8:54 AM, Cao thi my linh : Thank April 29, 2025 at 8:56 AM, Sazzad Bhai SKon : @FA Could you please confirm the UNK DBS id located at C1STKA72_0105807. According to the log scenario: there was crane error: empty release error. April 29, 2025 at 9:06 AM, Simon Dávid D SL NC : @Sazzad Bhai SKon Hello info kell AN reel jelenleg mennyi elérhető van raktáron? Köszönóm April 29, 2025 at 9:08 AM, Sazzad Bhai SKon : Currently 0 April 29, 2025 at 9:10 AM, Simon Dávid D SL NC : És raktárban ami ben van az mennyi? April 29, 2025 at 9:15 AM, Sazzad Bhai SKon : No Data April 29, 2025 at 9:25 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 140 - Anode: 09 VD Pre STK > VD - Cathode: 01 - Anode: 00 VD Post STK > Stacking - Cathode: 81 - Anode: 284 GF NC Available lot - CA: 29 - AN: 00 Thank you very much! April 29, 2025 at 9:55 AM, 이민재 : Please check NC AN #8 agv April 29, 2025 at 10:14 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVA52_07_046 Data loss error Thanks ! April 29, 2025 at 10:19 AM, Dariimaa/다리마/Ivancsa : Solved April 29, 2025 at 10:41 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 148 - Anode: 11 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 80 - Anode: 248 GF NC Available lot - CA: 27 - AN: 00 Thank you very much! April 29, 2025 at 10:53 AM, 이도형 (Lee) : Please check NC AN #4 AGV April 29, 2025 at 11:06 AM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello szükségem lenne CA reel ,nem sok reel-ünk van ,köszönöm April 29, 2025 at 11:09 AM, duzzaman Md (MCS) : Reels are on the way. The process is slow because of the Crane. April 29, 2025 at 11:15 AM, Yulya Kirsanova : Hello. Agv#10 stopped with error near Staсking Line 6/18 Please check @fa Thank you so much. April 29, 2025 at 11:19 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVC52_RTV01 Its OOS. Thanks ! April 29, 2025 at 11:57 AM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello CA reel SOS megfognak állni a sorok,köszönöm April 29, 2025 at 11:58 AM, Simon Dávid D SL NC : @FA hello #1 AGV error ,ellenőríznéd,köszönöm April 29, 2025 at 12:00 PM, Sazzad Bhai SKon : We have more than 10 pending jobs for cathode slitter. But STK is busy + oos sometimes April 29, 2025 at 12:00 PM, Sazzad Bhai SKon : We will increase the priority on MCS April 29, 2025 at 12:02 PM, 이도형 (Lee) : Please check NC CA #3 AGV April 29, 2025 at 12:04 PM, 이도형 (Lee) : Please check NC AN #8 AGV April 29, 2025 at 12:51 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot April 29, 2025 at 12:56 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 144 - Anode: 08 VD Pre STK > VD - Cathode: 02 - Anode: 02 VD Post STK > Stacking - Cathode: 83 - Anode: 262 GF NC Available lot - CA: 27 - AN: 03 Thank you very much! April 29, 2025 at 1:11 PM, 이도형 (Lee) : Please check NC CA #6 AGV April 29, 2025 at 1:15 PM, Dariimaa/다리마/Ivancsa : full magazine is not full. April 29, 2025 at 1:21 PM, 이도형 (Lee) : Please check NC CA Robot #2 April 29, 2025 at 2:01 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello CA reel-re lenne szükségünk,kevés az alapanyag ,köszönöm April 29, 2025 at 2:07 PM, duzzaman Md (MCS) : Materials on the way. Thank you. Its just too much job is pending at the Crane. Please wait patiently to let it proceed automatically. Or you can even increase the priority from your side using SCS. Increasing priorities from MCS is not a feasible solution always. April 29, 2025 at 2:09 PM, Yulya Kirsanova : Hello. Agv#7 stopped with error near Staсking OUT P07 Please check @fa Thank you so much. April 29, 2025 at 2:12 PM, Simon Dávid D SL NC : Én nem változtathatom meg a priorities csak az MCS. April 29, 2025 at 2:40 PM, Yulya Kirsanova : Hello. Agv#3 stopped with error near Staсking Line 5/17 Please check @fa Thank you so much. April 29, 2025 at 2:41 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 133 - Anode: 12 VD Pre STK > VD - Cathode: 00 - Anode: 01 VD Post STK > Stacking - Cathode: 83 - Anode: 260 GF NC Available lot - CA: 27 - AN: 14 Thank you very much! April 29, 2025 at 2:49 PM, 심재훈 : @KIM SEYEON [김세연]_FA 저희 4라인 수동물류, 스택앞에 쌓아놓지 않기로 했는데, 왜 쌓여 있나요? 플래이트 위에 올려 놓지도 않고요. 고객에게 발각 시 해당 리스크 감당 할 수 없습니다. 고객에게 약속된 프로세스 대로 운영이 안되고 있습니다. 기존에 협의한대로 운영부탁 드립니다. April 29, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA : 다시 교육하겠습니다. April 29, 2025 at 2:58 PM, Jun(정우준)_SKOH FA : @심재훈 피엠님, 유선상 연락드린대로 음극 릴창고 브릿지 컨베이어 모터 텐션 조정 작업진행하겠습니다. 15:30 ~ 15:50 작업 예정입니다. 협조 감사합니다. April 29, 2025 at 3:13 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello VD CA 4/4 -es kemence manuálisan lett kipakolva ,törölnéd nekem hogy újra lehesen tölteni,köszönöm April 29, 2025 at 3:33 PM, Jun(정우준)_SKOH FA : GF Reel AN 브릿지포트 70005,70006 작업 시작하겠습니다. April 29, 2025 at 3:43 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello CA reel SOS ,köszönöm April 29, 2025 at 3:48 PM, duzzaman Md (MCS) : Reels are on the way. As for the VD CA 4/4, its already done earlier. Thanks April 29, 2025 at 3:50 PM, JAEYOON KIM / CS : GF Reel AN 브릿지포트 작업 끝났습니다. April 29, 2025 at 4:08 PM, duzzaman Md (MCS) : @Manufacturing Could you please check VD CA 4-2 , P02. Carrier MLC1033 should be there. But its not showing in MCS. Was it removed manually. Kindly share information about it. Thanks April 29, 2025 at 4:22 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 129 - Anode: 09 VD Pre STK > VD - Cathode: 01 - Anode: 07 VD Post STK > Stacking - Cathode: 92 - Anode: 256 GF NC Available lot - CA: 33 - AN: 31 Thank you very much! April 29, 2025 at 4:42 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello CA reel SOS megálnak a gépek,lécci a prioritin növelj ,köszönöm April 29, 2025 at 4:44 PM, duzzaman Md (MCS) : @FA Kindly check E0STKA52_P01 Inv 01 run timeover error Thanks you April 29, 2025 at 4:45 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check reel April 29, 2025 at 5:03 PM, Dániel Hufnágel : Currently i am at powder GF, but guys can help you! April 29, 2025 at 5:06 PM, Dániel Hufnágel : Its running now! April 29, 2025 at 5:08 PM, KIM SEYEON [김세연]_FA : 👍 April 29, 2025 at 5:31 PM, KollerCsaba 처버 Чобо : Dear FA Please unload 10 Anode and 10 Cathode pallet for L4 Thanks April 29, 2025 at 5:34 PM, Dániel Hufnágel : Szia! MCS est kérd meg erre,mi nem tudjuk mely anyagok amelyikek megfelelőek a 4 es sorra! De ő is csak parancsot ad a raktárnak manuál portra kivétel a to dolgotok! April 29, 2025 at 5:36 PM, KollerCsaba 처버 Чобо : @duzzaman Md (MCS) thank you April 29, 2025 at 5:46 PM, T. Gàbornè C SL NC : Hello @Fa please check CA robot#3 MCS data report error Thx April 29, 2025 at 5:56 PM, 이한웅(삼구) : GF CA Reel 출고 지연으로 인한 순차적 비가동 발생중입니다. 4/1 17:40~ 5/3 17:30~ April 29, 2025 at 5:58 PM, T. Gàbornè C SL NC : Good Afternoon @MCS GF NC CA no move reel. Waiting for reels. Please check the reel priority . Thank you very much April 29, 2025 at 5:59 PM, 안종수 : @FA Please check the NC AN #1 Robot April 29, 2025 at 6:00 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Reel STK C52, “Load oversize error “ Thank you April 29, 2025 at 6:12 PM, Yaroslav SL/C 6 line : Hello everyone @fa AGV2 stopped near 6 line ST#20. Please check. Thanks April 29, 2025 at 6:23 PM, 안종수 : @FA Please check the NC AN #2 ROBOT ERROR. April 29, 2025 at 6:25 PM, Ynja/ivancsa FA : solved April 29, 2025 at 6:32 PM, Ynja/ivancsa FA : @mcs Please check C6VDA080_P01 There is no material on this port April 29, 2025 at 6:32 PM, Nagy Tamás FA : Solved April 29, 2025 at 6:36 PM, Shahbaz 샤바즈 MCS/RTD : Checking April 29, 2025 at 6:39 PM, Shahbaz 샤바즈 MCS/RTD : What about P02, the job was created for P01/P02 for MLA0169/MLA2250 respectively and transfer command still exists. April 29, 2025 at 6:45 PM, Ynja/ivancsa FA : But there is no material please delete job April 29, 2025 at 6:48 PM, Shahbaz 샤바즈 MCS/RTD : On both P01/P02? April 29, 2025 at 6:49 PM, Ynja/ivancsa FA : yes April 29, 2025 at 6:50 PM, Shahbaz 샤바즈 MCS/RTD : Ok, I will cancel the job and update the ports info. Thanks April 29, 2025 at 7:04 PM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD Please delete job C4VDA060 all port empty April 29, 2025 at 7:05 PM, Ynja/ivancsa FA : Also C6DA100_P01,P02 ports emty April 29, 2025 at 7:07 PM, Shahbaz 샤바즈 MCS/RTD : Incoming plates job as well? Currently AGV#06 is on the way with plates April 29, 2025 at 7:09 PM, Ynja/ivancsa FA : sorry AGV07 April 29, 2025 at 7:11 PM, Ynja/ivancsa FA : its Port 01,02 April 29, 2025 at 7:13 PM, Shahbaz 샤바즈 MCS/RTD : Are these plates removed manually, there is no log for these plates. April 29, 2025 at 7:15 PM, Ynja/ivancsa FA : There’s no material on C4VDA060_P01,P02 and C6VDA100_P02,P01. Please update the information from MCS side. April 29, 2025 at 7:16 PM, Shahbaz 샤바즈 MCS/RTD : Updated both. April 29, 2025 at 7:16 PM, Ynja/ivancsa FA : While transporting the AGV, the material ID was accidentally deleted. April 29, 2025 at 7:17 PM, Shahbaz 샤바즈 MCS/RTD : Okay, Please can you LR again for the half chambers. Thanks April 29, 2025 at 7:39 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 152 - Anode: 19 VD Pre STK > VD - Cathode: 03 - Anode: 0 VD Post STK > Stacking - Cathode: 92 - Anode: 245 GF NC reel Available lot - CA: 36 - AN: 24 Thank you April 29, 2025 at 7:43 PM, 안종수 : GF CA Reel 출고 지연으로 인한 4,5,6라인 전설비 비가동 발생중입니다. 라인당 6릴 확보 후 설비 가동하도록 하겠습니다. 4/1 17:40~ 4/2 18:32~ 4/3: 17:50~ 5/1 18:20~ 5/2 18:05~ 5/3: 17:35~ 6/1 19:12~ 6/2 18:20~ 6/3:17:45~ April 29, 2025 at 7:43 PM, 이주봉PM LEE JUBONG(FA) : 네 April 29, 2025 at 7:44 PM, QuangPhan : Hello! @FA NC AN AGV #8 error. Thanks April 29, 2025 at 7:59 PM, QuangPhan : Hello! @FA NC AN 4/1 AGV #6 error. Thanks April 29, 2025 at 8:00 PM, KIM SEYEON [김세연]_FA : can you check if there are LR from notching 4-1 4-2 4-3 5-1 5-2 5-3 6-1 6-2 6-3??? April 29, 2025 at 8:07 PM, Shahbaz 샤바즈 MCS/RTD : Yes sir, LR is received for NC CA, and there are jobs for 4-1, 4-2, 4-3, 5-1, 5-2, 5-3, 6-1, 6-2, and 6-3. April 29, 2025 at 8:14 PM, 안종수 : 라인당 6릴 확보 후 설비 가동 하였습니다 4/1 : 17:40~20:02 4/2 : 18:32~19:59 4/3 : 17:50~20:07 5/1 : 18:20~19:57 5/2 : 18:05~19:52 5/3 : 17:35~19:52 6/1 : 19:12~19:40 6/2 : 18:20~19:43 6/3 : 17:45~19:48 April 29, 2025 at 8:18 PM, 이주봉PM LEE JUBONG(FA) : (mcs) When the carrier is shipped, please ship the following carrier. Please manually release it to the port E0STKC51_M04~08 LTC0597 LTC1268 0190 1685 0957 0137 0215 0204 0282 1379 0179 1918 0674 Please give priority to GF CA reels. Thank you 😊 April 29, 2025 at 8:19 PM, 이주봉PM LEE JUBONG(FA) : @Shahbaz 샤바즈 MCS/RTD April 29, 2025 at 8:35 PM, 안종수 : NC AN RTV ERROR. CV06 TRAY ID LOSS Please check. @FA April 29, 2025 at 8:41 PM, Nagy Tamás FA : Done April 29, 2025 at 8:46 PM, 안종수 : Thank you April 29, 2025 at 9:10 PM, Ynja/ivancsa FA : @mcs Please check Agv 03 and 06 at VD AN. Now it is idle April 29, 2025 at 9:14 PM, Shahbaz 샤바즈 MCS/RTD : The jobs were aborted by Rail OP Action after alarm, please return them to the stocker. Thanks April 29, 2025 at 9:19 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for all these reels and now they are transferring. April 29, 2025 at 9:54 PM, T. Gàbornè C SL NC : @MCS Please check GF CA NC reel Storage #52 , no move reels. Thank you for much. April 29, 2025 at 9:59 PM, Shahbaz 샤바즈 MCS/RTD : Currently the cranes are working normally, do you mean reels to NC 6 line? April 29, 2025 at 10:01 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check LTC1602 at E0STKC51_P02, it’s not moving for long time. Thank you April 29, 2025 at 10:04 PM, T. Gàbornè C SL NC : No came in the last 30 minutes. NC 5-4 line very slowly move the reels April 29, 2025 at 10:06 PM, 김주연 : @FA LTC1602 캐리어 정확한 위치 확인 필요합니다 April 29, 2025 at 10:08 PM, Shahbaz 샤바즈 MCS/RTD : It’s moving now, earlier the port went OOS and the carrier remove report was not received from the stkC52_P02 port. April 29, 2025 at 10:09 PM, Ynja/ivancsa FA : C1STKA71’s crane error pls check it April 29, 2025 at 10:09 PM, Ynja/ivancsa FA : overload error April 29, 2025 at 10:09 PM, KIM SEYEON [김세연]_FA : Who make manual transfer at VD area? April 29, 2025 at 10:09 PM, Shahbaz 샤바즈 MCS/RTD : Ok, now the reels are transferring, there was an issue with a LTC1602 transfer. April 29, 2025 at 10:21 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot April 29, 2025 at 10:22 PM, QuangPhan : Dear @FA AN VD 4-3 #30 stopped temperature overheat Please send mgz warehouse, the technicians repair machine start. Thank you. April 29, 2025 at 10:24 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 152 - Anode: 20 VD Pre STK > VD - Cathode: 03 - Anode: 02 VD Post STK > Stacking - Cathode: 65 - Anode: 245 GF NC reel Available lot - CA: 30 - AN: 44 Thank you April 29, 2025 at 10:41 PM, Ynja/ivancsa FA : There’s no material on C5VDA050_P03,P04. Please update the information from MCS side. April 29, 2025 at 10:44 PM, Ynja/ivancsa FA : @mcs Please check Agv#08 at VD AN. Now it is idle April 29, 2025 at 10:44 PM, Shahbaz 샤바즈 MCS/RTD : Updated April 29, 2025 at 10:44 PM, Ynja/ivancsa FA : Thank you April 29, 2025 at 10:46 PM, Shahbaz 샤바즈 MCS/RTD : These are the plates loaded from VD 5-5 but they are loaded as UNK carriers that’s why data left in MCS for the VD machine. Please transfer them to the stocker April 29, 2025 at 10:47 PM, Shahbaz 샤바즈 MCS/RTD : AGV#08 @Ynja/ivancsa FA April 29, 2025 at 10:50 PM, Ynja/ivancsa FA : I don’t know why this is happening — it has repeated several times today. Thank you April 29, 2025 at 10:51 PM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD Could you please check VD CA 6/4 and 5/2 half chambers? April 29, 2025 at 10:52 PM, Shahbaz 샤바즈 MCS/RTD : The alarm was “Fork inplace abnormal” but I don’t have any idea regarding this. April 29, 2025 at 10:57 PM, Shahbaz 샤바즈 MCS/RTD : Please LR again for 6-4 and confirm 5-2 both P01/P02 are empty? April 29, 2025 at 10:57 PM, Shahbaz 샤바즈 MCS/RTD : Sorry P03/P04 of 5-2 April 29, 2025 at 10:59 PM, Ynja/ivancsa FA : yes empty April 29, 2025 at 11:03 PM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD Could you please check VD AN 6/8, 6/4, 6/3 and 4/4 half chambers? April 29, 2025 at 11:08 PM, Shahbaz 샤바즈 MCS/RTD : Please LR again for VD An 4-4, 5-5, 6-3, 6-4 and 6-8 April 29, 2025 at 11:11 PM, Ynja/ivancsa FA : ✅ April 29, 2025 at 11:20 PM, Shahbaz 샤바즈 MCS/RTD : LR received but there is some issue because of the previous data due to unloading issues. Please can you LR again for 6-3,6-4 and 6-8 Thank you. April 29, 2025 at 11:23 PM, T. Gàbornè C SL NC : @MCS Please check GF CA reel warehouse, no move reels #51-#52 storege. We'll stop NC line :4-5-5 if we don't get Reel Please help. Thank you for much. April 29, 2025 at 11:24 PM, QuangPhan : Hello! @FA NC AN 5/3 AGV #8 error. Thanks April 29, 2025 at 11:30 PM, Ynja/ivancsa FA : There’s no material on C6VDA010_P03,P04,P01,P02. Please update the information from MCS side. April 29, 2025 at 11:30 PM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD April 29, 2025 at 11:32 PM, Shahbaz 샤바즈 MCS/RTD : @Ynja/ivancsa FA Job created for VD An 6-3,6-4 and 6-8 half chambers. Please LR again for 4-4 and 5-5. April 29, 2025 at 11:38 PM, T. Gàbornè C SL NC : @Fa Please check the next CA VD, 5_02 abdd 6_04, because it was only half packed with AGV Thank you very much April 29, 2025 at 11:38 PM, Shahbaz 샤바즈 MCS/RTD : 6-1 updated, Please LR again. April 29, 2025 at 11:52 PM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD There’s no material on C5VDA030_P03,P04,. Please update the information from MCS side. April 30, 2025 at 12:01 AM April 30, 2025 at 12:01 AM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot April 30, 2025 at 12:03 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 152 - Anode: 14 VD Pre STK > VD - Cathode: 00 - Anode: 03 VD Post STK > Stacking - Cathode: 59 - Anode: 254 GF NC reel Available lot - CA: 33 - AN: 60 Thank you April 30, 2025 at 12:58 AM, QuangPhan : Dear @FA AN VD 4-3 #30 stopped temperature overheat Please send mgz warehouse, the technicians repair machine start. Thank you. April 30, 2025 at 12:59 AM, Lajos Gábor F.A. : @mcs could you check April 30, 2025 at 1:00 AM, Lajos Gábor F.A. : @Shahbaz 샤바즈 MCS/RTD April 30, 2025 at 1:00 AM, Shahbaz 샤바즈 MCS/RTD : These needs to be send back to the stocker from ACS manually. April 30, 2025 at 1:01 AM, Lajos Gábor F.A. : Okay, thank you April 30, 2025 at 1:32 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Anode reel stockers. Thank you April 30, 2025 at 1:41 AM, Lajos Gábor F.A. : Could you Update 5/2, 6/4 are empty April 30, 2025 at 1:45 AM, Shahbaz 샤바즈 MCS/RTD : Both fully empty? April 30, 2025 at 1:46 AM, Shahbaz 샤바즈 MCS/RTD : Did you transfer these plates? @Lajos Gábor F.A. April 30, 2025 at 1:47 AM, Nagy Tamás FA : it was me April 30, 2025 at 1:48 AM, Lajos Gábor F.A. : Yes,and 4-4 is empty to April 30, 2025 at 1:48 AM, Shahbaz 샤바즈 MCS/RTD : Okay so VD AN 4-3 is empty now? April 30, 2025 at 1:49 AM, Nagy Tamás FA : Yes April 30, 2025 at 1:55 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN . We didn’t recieved material for a while. Thanks April 30, 2025 at 1:59 AM, Shahbaz 샤바즈 MCS/RTD : There are jobs from the stocker but currently stocker crane is OOS. April 30, 2025 at 2:12 AM, Ynja/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD There’s no material on C6VDA060_P03,P04,. Please update the information from MCS side. April 30, 2025 at 2:15 AM, Shahbaz 샤바즈 MCS/RTD : Updated. April 30, 2025 at 2:33 AM, Ynja/ivancsa FA : 6/9 P01,P02 also update pls April 30, 2025 at 3:19 AM, Ynja/ivancsa FA : VD CA 4/1 P03,P04 empty pls update information April 30, 2025 at 3:33 AM, QuangPhan : @FA @AGV VD An 4-5 the plates was wrong position . Plz use agv to fix it . thank u April 30, 2025 at 3:52 AM, 안종수 : VD CA #9 AGV Error. Check please @fa April 30, 2025 at 4:13 AM, Viki - SL_C : @FA Hello! An AGV stopped between the L4 and L5 stacking. Check it please! Thank you! April 30, 2025 at 5:18 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 149 - Anode: 18 VD Pre STK > VD - Cathode: 02 - Anode: 30 VD Post STK > Stacking - Cathode: 55 - Anode: 247 GF NC reel Available lot - CA: 0 - AN: 112 Thank you April 30, 2025 at 5:21 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please LR again for VD AN 4-8 and 6-9 empty half chamber. Thank you. April 30, 2025 at 5:23 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check reel stk A51 Thank you. April 30, 2025 at 6:45 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 144 - Anode: 15 VD Pre STK > VD - Cathode: 00 - Anode: 33 VD Post STK > Stacking - Cathode: 55 - Anode: 247 GF NC reel Available lot - CA: 00 - AN: 98 Thank you April 30, 2025 at 6:54 AM, Andrea Zentay : Good morning, @MCS @FA please help us: Error message: 124, Load Collapse Error(Left) April 30, 2025 at 6:59 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please help April 30, 2025 at 7:01 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. Apr. 30 Time: 06:00~18:00 1. Jeong Woo-jun 2. Baek Ho-jong April 30, 2025 at 8:02 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot April 30, 2025 at 8:08 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 135 - Anode: 18 VD Pre STK > VD - Cathode: 01 - Anode: 10 VD Post STK > Stacking - Cathode: 58 - Anode: 247 GF NC reel Available lot - CA: 00 - AN: 81 Thank you April 30, 2025 at 9:10 AM, Dariimaa/다리마/Ivancsa : @mcs VD CA 4-2 5-6 chamber has only 2 carriers. Please check Thank you! April 30, 2025 at 9:12 AM, duzzaman Md (MCS) : No lot available. Job will be created as soon as beat lot available. Thank you April 30, 2025 at 9:17 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 134 - Anode: 06 VD Pre STK > VD - Cathode: 01 - Anode: 06 VD Post STK > Stacking - Cathode: 73 - Anode: 261 GF NC reel Available lot - CA: 00 - AN: 74 Thank you April 30, 2025 at 9:19 AM, Sazzad Bhai SKon : @FA Please check the UNK DUP carriers. UNKDUP-MLC2096-250430004645B (C1STKC71, 0204601) UNKDUP-MLC3245-250430064132A (C1STKC72, 0100102) April 30, 2025 at 9:54 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA NC Ca 4-3 #3AGV 풀매거진 안착 불량 확인 부탁드립니다. April 30, 2025 at 9:54 AM, Jun(정우준)_SKOH FA : 네, 알겠습니다. April 30, 2025 at 10:00 AM, 이한웅(삼구) : @KIM SEYEON [김세연]_FA @Jun(정우준)_SKOH FA 안녕하세요. 금일 음극 3라인 노칭 온라인 셋팅 생산 진행하려고 합니다. AGV 사용해야 한다고 전달 받았는데 지금 공매거진 투입 포트 Auto 모드 전환하면 공매거진 받을 수 있을까요? April 30, 2025 at 10:01 AM, 이한웅(삼구) : 금일 NC An 3라인 명일 Ca 3라인 진행입니다. April 30, 2025 at 10:03 AM, Jun(정우준)_SKOH FA : 확인해보겠습니다. April 30, 2025 at 10:04 AM, 이한웅(삼구) : 감사합니다! April 30, 2025 at 10:06 AM, duzzaman Md (MCS) : @FA Kindly check C1STKC71_C01 Load oversize error (right) Thanks ! April 30, 2025 at 10:17 AM, Jun(정우준)_SKOH FA : 네 3라인 AGV사용 가능합니다. 3라인 사용 중 이슈 발생시 공유 부탁드립니다. April 30, 2025 at 10:19 AM, 이한웅(삼구) : 네 알겠습니다. April 30, 2025 at 10:20 AM, 이한웅(삼구) : NC An 3라인 매거진 포트 Auto Mode 전환 했습니다. April 30, 2025 at 10:23 AM, 이한웅(삼구) : please check NC Ca #3 Robot April 30, 2025 at 10:37 AM, JAEYOON KIM / CS : 음극 릴창고 브릿지 컨베이어 모터 텐션 조정 작업 작업 진행으로 인해 비가동 하겠습니다. 작업 예정시간은 11:00 - 11:20 입니다. 협조 감사합니다. April 30, 2025 at 10:41 AM, Jun(정우준)_SKOH FA : @심재훈 피엠님 유선상 요청드린대로, 1. GF AN 52 C01호기 원크레인 모드 테스트 - 13시~17시(4H), 물동량 소폭 감소 2. GF AN 51,52 브릿지 포트 모터 텐션조정 - 11시~11시20분, 비가동 20분 작업 진행하겠습니다. 협조 감사합니다. April 30, 2025 at 10:43 AM, 최정한.KOVA : VD CA 6-10호기 하부좌측 히터나갔습니다. 챔버내에 건조전 매거진플레이트 있습니다. AGV 수동반송해주시고 히터교체 해주세요. April 30, 2025 at 10:54 AM, 이도형 (Lee) : please check NC Ca #2 AGV April 30, 2025 at 11:10 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA34_C01 MCP Control Power CP trip Thanks April 30, 2025 at 11:12 AM, Nguyên : GF NC AN Reel Very slow out please check for me April 30, 2025 at 11:12 AM, duzzaman Md (MCS) : Also please check C1STKA71_C02 LOAD OVERSIZE ERROR THANK YOU April 30, 2025 at 11:14 AM, duzzaman Md (MCS) : There is issue with both of the AN STK 51 and 52 @FA kindly check Thank you April 30, 2025 at 11:14 AM, JAEYOON KIM / CS : @심재훈 GF AN 브릿지 포트 모터 텐션 작업 완료 했습니다. 협조 감사합니다. April 30, 2025 at 11:14 AM, Jun(정우준)_SKOH FA : 수고하셨습니다. April 30, 2025 at 11:22 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 130 - Anode: 02 VD Pre STK > VD - Cathode: 00 - Anode: 12 VD Post STK > Stacking - Cathode: 91 - Anode: 260 GF NC reel Available lot - CA: 00 - AN: 01 Thank you April 30, 2025 at 11:52 AM, duzzaman Md (MCS) : @FA KINDLY CHECK E0CNVC52_RTV01 DATA LOSS ERROR THANKS ! April 30, 2025 at 12:32 PM, 이한웅(삼구) : MLA0092 반송 이력 확인 부탁드립니다. 풀매거진인데 공매거진으로 노칭 설비 투입 되었습니다. April 30, 2025 at 12:35 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please check available lot April 30, 2025 at 12:38 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 122 - Anode: 01 VD Pre STK > VD - Cathode: 02 - Anode: 11 VD Post STK > Stacking - Cathode: 83 - Anode: 266 GF NC reel Available lot - CA: 00 - AN: 74 Thank you April 30, 2025 at 12:41 PM, Andrea Zentay : @Fa Cathode 4/3-hoz szeretnénk segítséget. Az egyik szij lefutott a helyéről. Előre is köszönjük. April 30, 2025 at 1:25 PM, Andrea Zentay : @MCS CA reel warehouse is down without an error message. Could you please check what the problem is? April 30, 2025 at 1:26 PM, duzzaman Md (MCS) : Problem in the conveyor. E0CNVC51_08_047. Data missmatch error April 30, 2025 at 1:28 PM, Mr.Miti (미티) FA : Thank you! Wo on it! April 30, 2025 at 1:30 PM, duzzaman Md (MCS) : Already up. Thanks for your prompt action. April 30, 2025 at 1:33 PM, Mr.Miti (미티) FA : Thank you! April 30, 2025 at 1:50 PM, P.Bence A SSL : L5 stacking agv5 stop please check April 30, 2025 at 2:01 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 125 - Anode: 06 VD Pre STK > VD - Cathode: 02 - Anode: 07 VD Post STK > Stacking - Cathode: 76 - Anode: 266 GF NC reel Available lot - CA: 00 - AN: 109 Thank you April 30, 2025 at 2:18 PM, Jun(정우준)_SKOH FA : STKA52-C02 크레인으로 원랙모드 테스트 시작했습니다. April 30, 2025 at 3:18 PM, 이한웅(삼구) : NC Ca 릴 출고 지연으로 비가동 발생 중입니다. April 30, 2025 at 3:22 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot April 30, 2025 at 3:23 PM, KIM SEYEON [김세연]_FA : 양극 릴 자재가 있나요? April 30, 2025 at 3:24 PM, 이한웅(삼구) : 전극 문의 시 자재 있다고 들었습니다. 전극에도 공트레이 부족 현상으로 설비 정지 멈춘다고 전달 들었습니다. April 30, 2025 at 3:28 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 119 - Anode: 03 VD Pre STK > VD - Cathode: 02 - Anode: 11 VD Post STK > Stacking - Cathode: 89 - Anode: 274 GF NC reel Available lot - CA: 07 - AN: 104 Thank you April 30, 2025 at 3:41 PM, 최정한.KOVA : VD CA 6-10 히터교체완료후 온라인 자동운전 LR 올렸습니다. April 30, 2025 at 3:47 PM, Eduard SL Shift A : Line 6 ST 12 AGV 5 stopped April 30, 2025 at 4:15 PM, 이한웅(삼구) : Please check NC An #3 AGV April 30, 2025 at 4:29 PM, Nguyên : NC AN GF Reel are coming out very slow.we ran out of reel to produce.please check for me April 30, 2025 at 4:33 PM, duzzaman Md (MCS) : There are jobs. Its a bit slow. Also E0STKA52 , Crane 02 is out if service. April 30, 2025 at 4:33 PM, duzzaman Md (MCS) : @FA Please check. Thanks April 30, 2025 at 4:39 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 126 - Anode: 08 VD Pre STK > VD - Cathode: 02 - Anode: 13 VD Post STK > Stacking - Cathode: 79 - Anode: 261 GF NC reel Available lot - CA: 03 - AN: 107 Thank you April 30, 2025 at 4:43 PM, 이도형 (Lee) : Please check NC An #1 report April 30, 2025 at 4:45 PM, duzzaman Md (MCS) : This message was deleted. April 30, 2025 at 4:45 PM, duzzaman Md (MCS) : GF AN NC Line 1, all ports are OOS. Thanks ! April 30, 2025 at 4:46 PM, 이도형 (Lee) : Please check NC An #1 ROBOT C0PVA010 April 30, 2025 at 5:04 PM, Dariimaa/다리마/Ivancsa : @mcs VD CA C1STKC71_P17 P18 hasn't moved for a long time. Please check Thank you! April 30, 2025 at 5:23 PM, duzzaman Md (MCS) : VC 6 is taking the material and will deliver to C5VDC030_P04 THANKS April 30, 2025 at 6:08 PM, VK (mcs) : @FA Please check Anode Pre -STK A71 MCP AP error! Also please check Cathode Reel STK C51 Load oversize error! April 30, 2025 at 6:12 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében April 30, 2025 at 6:15 PM, Debreczeni Ármin : @Szücs Géza FT-B Szia! Elvileg tudtok az alábbiakról. Nekünk leltár miatt kell így. Reggel 4 után a reel warehouse nem mehet Reggel 5 után a sorokon AGV mozgás nem lehet a stackingen. Ez érvényes az első emeletre is. April 30, 2025 at 6:16 PM, Szücs Géza FT-B : köszönjük szépen az információkat. mostmár tudok róla! April 30, 2025 at 6:26 PM, VK (mcs) : @FA Please check Cathode Reel STK C51 LTC0387 ( 0201004) is not moving for a while.reply command is one parameter is invalid! Please check shelf is occupied by carrier or not and modify it. Thx April 30, 2025 at 6:27 PM, Csanálosi Gábor FA : C51 done April 30, 2025 at 6:27 PM, Csanálosi Gábor FA : And error again April 30, 2025 at 6:33 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 음극 전창고 크레인 멈춰있습니다. 공매거진 공급지연, 설비정지 발생했습니다. 확인부탁드립니다 April 30, 2025 at 6:34 PM, 방혁 PM(Bang.Hyuk) FA : 확인하겠습니다 April 30, 2025 at 6:34 PM, KIM SEYEON [김세연]_FA : @Böröczki Balázs please check April 30, 2025 at 6:39 PM, Koncz Tamás : Nem kaptunk infót róla. April 30, 2025 at 6:42 PM, KIM SEYEON [김세연]_FA : @김수민 새벽에 재고조사 계획을 저희 테크니션에게 상세히 공유 부탁드립니다 April 30, 2025 at 6:42 PM, Lan Nhi : @MCS hi please check chamber 5-3 VD CA, only 3 chambers are loaded. thanks April 30, 2025 at 6:43 PM, Debreczeni Ármin : Nekünk emailbe és szóba jött April 30, 2025 at 6:47 PM, 김수민 : 물류 재고조사 관련해서는 04:00 Reel 자동화 출고 Block 외에는 FA팀에서 진행하는 재고조사에 대해 별도로 알고 있는 내용이 없습니다. 해당 사항은 주재원 측에 문의해주시면 감사하겠습니다. April 30, 2025 at 6:48 PM, VK (mcs) : MLC 3219 is waiting in STK @FA Please check Cathode pre-STK C71 Port 18 ( 9005) Output H/S off. SCS indicates MLC4065 is there!! April 30, 2025 at 6:48 PM, Csanálosi Gábor FA : Omw April 30, 2025 at 6:49 PM, Csanálosi Gábor FA : Finally done April 30, 2025 at 6:52 PM, Csanálosi Gábor FA : C1STKC71 P18 is online April 30, 2025 at 6:52 PM, Csanálosi Gábor FA : MLC4065 is really there April 30, 2025 at 6:52 PM, Mykhailo : L5 AGV #7 error. please check. Thanks April 30, 2025 at 6:53 PM, Csanálosi Gábor FA : Nope, MLC2237 April 30, 2025 at 6:53 PM, VK (mcs) : Okay , please wait I am modifying MCS April 30, 2025 at 6:55 PM, Csanálosi Gábor FA : This message was deleted. April 30, 2025 at 6:57 PM, Mykhailo : location near machine ST 5/8 April 30, 2025 at 6:58 PM, Lan Nhi : plz check for me Nc/ An line 4&5 is not provided blank magazine from 18:00-18:57. thanks April 30, 2025 at 6:59 PM, Csanálosi Gábor FA : STKA71 working again April 30, 2025 at 7:00 PM, VK (mcs) : STK was OoS but now it’s normal. April 30, 2025 at 7:03 PM, Csanálosi Gábor FA : @VK (mcs) GF ST AGV #6 trying to unload to a port that is occupied. Can you send agv somewhere else? April 30, 2025 at 7:03 PM, 김수민 : Plz recheck April 30, 2025 at 7:04 PM, Rácz Dániel / FA : @mcs April 30, 2025 at 7:05 PM, Debreczeni Ármin : St line 6 agv robot #6 problem April 30, 2025 at 7:05 PM, Debreczeni Ármin : Stopped April 30, 2025 at 7:05 PM, VK (mcs) : Job cancelled April 30, 2025 at 7:05 PM, Debreczeni Ármin : #5 also April 30, 2025 at 7:05 PM, Csanálosi Gábor FA : Jövök April 30, 2025 at 7:15 PM, 방혁 PM(Bang.Hyuk) FA : Hello gabor @Csanálosi Gábor FA Can you check C51 C02? April 30, 2025 at 7:17 PM, Csanálosi Gábor FA : Omw April 30, 2025 at 7:18 PM, Csanálosi Gábor FA : Meenwhile i stopped for a yaskawa error. An 2 April 30, 2025 at 7:20 PM, VK (mcs) : This message was deleted. April 30, 2025 at 7:21 PM, VK (mcs) : Next LOT available Pre-STK > Notching Anode:00 Cathode:122 Pre-STK > VD Anode:00 Cathode:00 Post-STK > Stacking Anode:273 Cathode:98 Reel STK > Notching Anode:125 Cathode:06 April 30, 2025 at 7:27 PM, Yosyp Tovt : line 6 ST : please robot 7 is not working April 30, 2025 at 7:28 PM, Ynja/ivancsa FA : @mcs AGV#7 at ST CA double storage. pls delete job April 30, 2025 at 7:29 PM, Csanálosi Gábor FA : Done April 30, 2025 at 7:30 PM, Ynja/ivancsa FA : @VK (mcs) April 30, 2025 at 7:31 PM, VK (mcs) : I will cancel it. Please do not apply LR . thx April 30, 2025 at 7:37 PM, Ynja/ivancsa FA : @VK (mcs) I’m really sorry, but I accidentally deleted the AGV#03 at ST CA job. Could you please resend it? April 30, 2025 at 7:38 PM, VK (mcs) : MLC3219 is aborted by storage. Please send carrier MLC2186 in the port 4 to the Post-STK and apply again LR for Port 3 and 4. April 30, 2025 at 7:38 PM, VK (mcs) : Checking April 30, 2025 at 7:39 PM, Lan Nhi : Yes April 30, 2025 at 7:40 PM, VK (mcs) : Another job already assigned to that port. I will send it back to STK. April 30, 2025 at 7:41 PM, Ynja/ivancsa FA : Thank you April 30, 2025 at 8:11 PM, KIM SEYEON [김세연]_FA : @권재환 피엠님 명일 새벽 재고조사 관련 카톡방에도 올려주실수 있을까요? 우선 FA는 조립의 요청에 따라서 ACTION하겠습니다. April 30, 2025 at 8:27 PM, Lan Nhi : I took it out. Please give me another chamber to continue drying. Thank you. April 30, 2025 at 8:29 PM, 권재환 : 명일 5/1 아침 현장 재고 조사 간 FA Team 하기 내용으로 도움 주시면 감사드리겠습니다 (GF & 1F 동일) 25.05.01 목요일 - 4:00AM NC Reel 창고 자동 출고 block - 5:00AM ST AGV 반송 Stop (진행 중인 Job 종료 후 Stop / 대기 Job Hold) - 5:30AM NC Reel 창고 자동 출고 원복 - 6:00AM ST AGV 반송 원복 - NC~ST AGV 반송 실 MGZ Data 공유 April 30, 2025 at 8:30 PM, VK (mcs) : LR received at 19:49 Material will deliver base on priorities. Please wait April 30, 2025 at 8:30 PM, Ynja/ivancsa FA : @VK (mcs) Please check 4/9 5/6 5/3 at VD Ca Half chamber April 30, 2025 at 8:33 PM, KIM SEYEON [김세연]_FA : @Noémi (소미) 번역부탁해요 April 30, 2025 at 8:34 PM, Lan Nhi : Yes thank you April 30, 2025 at 8:36 PM, Lan Nhi : @MCS please check chamber 4-1 VD CA, only half chamber is loaded. thanks April 30, 2025 at 8:38 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 음극 3-2 AGV#8번 실매거진 UR작업중 안착불량 발생했습니다. 확인부탁드립니다 April 30, 2025 at 8:39 PM, 방혁 PM(Bang.Hyuk) FA : 이동하겠습니다 April 30, 2025 at 8:49 PM, 김수민 : 음극 3-3호기 배출부 런타임 오버알람 지속발생하는데 같이 확인 부탁드립니다 April 30, 2025 at 8:54 PM, VK (mcs) : VD C 4/9 MLC3223 & MLC3246 assigned but job cancelled by OP action VD C 5/6 MLC2072 & MLC3041 assigned and these also cancelled by OP action please apply LR again For 5/6 and 4/9 VD C 5/3 already received LR. April 30, 2025 at 8:58 PM, VK (mcs) : VD C 4/1 Jobs cancelled by OP action Please apply LR again for ports 3 & 4 April 30, 2025 at 9:22 PM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 이거 알람이 메거진 하나 배출부 투입 될 때마다 나오는데 확인 부탁드립니다 April 30, 2025 at 9:26 PM, KIM SEYEON [김세연]_FA : @김수민 혹시 야간에 3라인도 계속 생산하시나요? April 30, 2025 at 9:28 PM, Lan Nhi : Yes April 30, 2025 at 9:31 PM, Ynja/ivancsa FA : @VK (mcs) There’s no material on C6VDA060_P03,P04,. Please update the information from MCS side. April 30, 2025 at 9:31 PM, VK (mcs) : @Csanálosi Gábor FA Can you Please check Cathode Reel STK C51 LTC0387 ( 0201004) is not moving for a while.reply command is one parameter is invalid! Please check shelf is occupied by carrier or not and modify it. Thx April 30, 2025 at 9:31 PM, 김수민 : 3-3 장착중인 2릴 생산완료하면 야간 추가 생산없습니다. April 30, 2025 at 9:32 PM, Ynja/ivancsa FA : @VK (mcs) Please check 6/10 6/1 6/5 6/4 5/3 4/4 4/7 at VD AN Half chamber April 30, 2025 at 9:33 PM, KIM SEYEON [김세연]_FA : 야간에 제어인원이 없어서 만약 조치 안되면 명일 확인하겠습니다. April 30, 2025 at 9:35 PM, Csanálosi Gábor FA : On scs i only see retrieve reserved for that port. April 30, 2025 at 9:38 PM, VK (mcs) : Yes exactly. Job cancelled by storage a few days ago due to error but shelf status remains retrieve reserved! Please check shelf status and modify it. April 30, 2025 at 9:44 PM, 김수민 : 넵 알겠습니다 April 30, 2025 at 9:46 PM, Csanálosi Gábor FA : Help me pls. Whats on 0201003? April 30, 2025 at 9:48 PM, VK (mcs) : Reason: Due to error in AGV all jobs cancelled by OP action and then material transferred to the post STK without notifying to RTD and carriers remains in RTD. I am clearing RTD now. I will inform you to apply again for LR April 30, 2025 at 9:49 PM, Csanálosi Gábor FA : LTC1389? April 30, 2025 at 9:50 PM, VK (mcs) : STK C51? According to MCS and SCS : LTC1389 April 30, 2025 at 9:52 PM, Csanálosi Gábor FA : Fine. Than 0201004 is an empty shelf April 30, 2025 at 9:55 PM, Csanálosi Gábor FA : @mcs @vk the ca yaskawa p11 has an NG magazine, MC1068. Manufacturing want to take it out. April 30, 2025 at 9:55 PM, Csanálosi Gábor FA : C0PVC020 April 30, 2025 at 9:56 PM, VK (mcs) : Thank you . Please modify it I will cancel current job for that shelf April 30, 2025 at 10:04 PM, Csanálosi Gábor FA : Sadly i cant modify the self data in scs. :( i ask what we can do. April 30, 2025 at 10:08 PM, VK (mcs) : Well if shelf was full then by creating a manual job it could be solve , but it’s empty. Okay I will change location to NA in MCS April 30, 2025 at 10:08 PM, VK (mcs) : It’s solved now . Thank you April 30, 2025 at 10:08 PM, Csanálosi Gábor FA : Solved, shelf is officially empty now. :) April 30, 2025 at 10:09 PM, VK (mcs) : Amazing. Thank you April 30, 2025 at 10:09 PM, Csanálosi Gábor FA : Your welcome April 30, 2025 at 10:17 PM, Badamaa/Ivancsa FA : gf no ca robot # 2 mcs data report incomlete error pls check April 30, 2025 at 10:19 PM, VK (mcs) : @ACS. @FA Please check Why most of the jobs from VD to Post -STK are cancelling ? It’s make an issue and chamber stays half. April 30, 2025 at 10:23 PM, Csanálosi Gábor FA : @VK (mcs) can you check pls? I see all the magazins id in ccs, but still error April 30, 2025 at 10:23 PM, VK (mcs) : I will check April 30, 2025 at 10:23 PM, Szücs Géza FT-B : Where is Mr @ACS I've never seen him before... 🤣 April 30, 2025 at 10:24 PM, VK (mcs) : Please apply LR for empty ports VD A 6/10 6/1 6/4 6/5 5/3 4/4 4/7 April 30, 2025 at 10:25 PM, VK (mcs) : Not responsible for ACS ? April 30, 2025 at 10:26 PM, VK (mcs) : Which port is it? April 30, 2025 at 10:27 PM, Csanálosi Gábor FA : C0PVC020 8008 April 30, 2025 at 10:28 PM, Csanálosi Gábor FA : And i see unknown plate on 8040 April 30, 2025 at 10:30 PM, VK (mcs) : This port hasn’t problem . But 8040 is UNK carrier April 30, 2025 at 10:31 PM, Csanálosi Gábor FA : If i wrote the ids can you input to it? April 30, 2025 at 10:32 PM, VK (mcs) : It doesn’t work, It should be fix by CCS then MCS will fine automatically. April 30, 2025 at 10:35 PM, VK (mcs) : It’s probably MLC3084 April 30, 2025 at 10:35 PM, Csanálosi Gábor FA : MLC3084 / MC3364 MC6473 MC5107 MC4008 MC3038 MC4145 April 30, 2025 at 11:18 PM, 김수민 : @VK (mcs) AN VD 3-2,3,4,5,6 Check how much transportable material is in the warehouse April 30, 2025 at 11:20 PM, VK (mcs) : There is only 1 MLA3168 April 30, 2025 at 11:22 PM, 김수민 : AN VD 3-2 Can you tell me when the plate was transferred? April 30, 2025 at 11:26 PM, VK (mcs) : Transport job requested at 21:28 but job terminated by OP action at 22:24 April 30, 2025 at 11:39 PM, 김수민 : Plz recheck April 30, 2025 at 11:42 PM, VK (mcs) : Now, there is no available material April 30, 2025 at 11:44 PM, 김수민 : Let me know if a job is created April 30, 2025 at 11:44 PM, Ynja/ivancsa FA : @VK (mcs) There’s no material on C4VDA080_P03,P04,. Please update the information from MCS side. April 30, 2025 at 11:45 PM, Ynja/ivancsa FA : also P02,P01 April 30, 2025 at 11:45 PM, VK (mcs) : Now , for VD A3/3 job assigned April 30, 2025 at 11:47 PM, VK (mcs) : @FA Please modify location in ACS first . Thx April 30, 2025 at 11:49 PM, VK (mcs) : Can you please tell me what happened for these carriers? April 30, 2025 at 11:52 PM, 김수민 : @fa Plz check AN VD AGV#7 April 30, 2025 at 11:56 PM, Ynja/ivancsa FA : I’m not exactly sure why, but since yesterday, when taking material from the AGV chamber, an error message ‘Fork Inplace Abnormal’ appears. When this happens, the material information remains in the chamber, and the material inside the AGV becomes ‘UNK’. April 30, 2025 at 11:58 PM, VK (mcs) : Yes I see, and it makes half chamber issue since yesterday Did you informed to Korean technicians? May 1, 2025 at 12:00 AM May 1, 2025 at 12:00 AM, Ynja/ivancsa FA : Yes, I already informed the Korean technicians about the issue. May 1, 2025 at 12:00 AM, VK (mcs) : @김지수PM(Gyuri)_FA Please check upper case. It makes chamber half issue. May 1, 2025 at 12:00 AM, VK (mcs) : Thank you May 1, 2025 at 12:20 AM, 김지수PM(Gyuri)_FA : ACS colleague will check tomorrow, there is nothing what we can do in this situation May 1, 2025 at 12:21 AM, VK (mcs) : Thank you May 1, 2025 at 1:26 AM, Ynja/ivancsa FA : @VK (mcs) There’s no material on C4VDC080_P01,P02,. Please update the information from MCS side. May 1, 2025 at 1:37 AM, 김수민 : @방혁 PM(Bang.Hyuk) FA 피엠님 음극 5-2 런타임 오바에러 많이 발생하는데 3-3이랑 같이 점검 부탁드립니다 May 1, 2025 at 1:38 AM, Debreczeni Ármin : @VK (mcs) Please share lot quantity thank you May 1, 2025 at 1:39 AM, Lan Nhi : plz check RTV line 6/Ca. error. thanks May 1, 2025 at 1:49 AM, VK (mcs) : Next LOT available Pre-STK > Notching Anode:30 Cathode:152 Pre-STK > VD Anode:03 Cathode:03 Post-STK > Stacking Anode:250 Cathode:70 Reel STK > Notching Anode:94 Cathode:05 May 1, 2025 at 2:29 AM, Ynja/ivancsa FA : C0PVC020 and 30 error pls check it May 1, 2025 at 4:13 AM, Ynja/ivancsa FA : @VK (mcs) There’s no material on C5VDA040_P03,P04,. Please update the information from MCS side. May 1, 2025 at 4:31 AM, Böröcz Tamás : @VK (mcs) There’s no material on C4VDA040_P01,P02 May 1, 2025 at 4:32 AM, Böröcz Tamás : Could you please remove the orders May 1, 2025 at 4:32 AM, 방혁 PM(Bang.Hyuk) FA : 넵 점검요청해두겠습니다 May 1, 2025 at 5:03 AM, 김지수PM(Gyuri)_FA : [17:02] 순환물류 멈췄고, 스택 AGV 비가동중입니다 May 1, 2025 at 5:05 AM, 방혁 PM(Bang.Hyuk) FA : 1. 04:00기준 릴창고 NC릴공급중단 2. 05:00기준 ST순환물류정지_스택 자동반송 중단 3. 5:30 릴창고 NC릴 공급 원복예정 4. 06:00 ST AGV 반송 원복 예정 May 1, 2025 at 5:09 AM, 김지수PM(Gyuri)_FA : [05:02]입니다. 죄송합니다. May 1, 2025 at 5:30 AM, 방혁 PM(Bang.Hyuk) FA : 05:30 GF NC 릴 자동출고 원복 May 1, 2025 at 5:33 AM, 방혁 PM(Bang.Hyuk) FA : 05:30 GF NC Reel Automatic transfer Restoration Please check the status of MCS command @VK (mcs) May 1, 2025 at 5:49 AM, 방혁 PM(Bang.Hyuk) FA invited FACS_Bareum kim, FACS_Wooseok Choi and FACS_JaewonShin. May 1, 2025 at 6:05 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— May 1, 2025 at 6:06 AM, 방혁 PM(Bang.Hyuk) FA : GF ST 순환 CV 원복 완료 ST 자동반송 시작 May 1, 2025 at 6:39 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please confirm the actual load status of VD CA 4-1 and 4-4. They have one and two plates respectively according to MCS. Thank you May 1, 2025 at 6:40 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1CNV071 track 16128 Runtime over error Thanks May 1, 2025 at 6:41 AM, Shahbaz 샤바즈 MCS/RTD : C1CNV072 May 1, 2025 at 6:47 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 171 - Anode: 56 VD Pre STK > VD - Cathode: 0 - Anode: 0 VD Post STK > Stacking - Cathode: 72 - Anode: 261 GF NC reel Available lot - CA: 00 - AN: 86 Thank you May 1, 2025 at 7:47 AM, FACS_Wooseok Choi invited FACS_오창훈_CHANGHOON. May 1, 2025 at 8:16 AM, Hồng Anh SL NC&VD 1F : Pls check for AGV 8 NC AN . May 1, 2025 at 8:23 AM, Yon Ko/연커/ : Done May 1, 2025 at 8:30 AM, 이민재 : Pls check NC AN AGV#7 May 1, 2025 at 8:34 AM, Nguyên : This message was deleted. May 1, 2025 at 8:41 AM, Sazzad Bhai SKon : @FA @Hồng Anh SL NC&VD 1F Good morning. I need your help. There are 16 UNK plate on GF. Could you please rack out them in manual port and restock? May 1, 2025 at 8:43 AM, Yon Ko/연커/ : Solved May 1, 2025 at 8:45 AM, Hồng Anh SL NC&VD 1F : I will come to check. May 1, 2025 at 8:49 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please confirm the actual load status of VD AN 4-5, 4-6, 5-7 and 6-6, They are in half loaded state according to MCS. Thank you May 1, 2025 at 8:51 AM, 안종수 : NC AN 4-3 공 매거진 공급이 안되서 설비 정지중입니다. 확인 부탁드립니다 @FA May 1, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check May 1, 2025 at 8:59 AM, Mr.Miti (미티) FA : Okay May 1, 2025 at 9:35 AM, Hồng Anh SL NC&VD 1F : FA pls check for C1STKA72 STK. Now alarm. We cannot take out mgz May 1, 2025 at 9:39 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please notify all the VD half chambers so we can verify the MCS/RTD data and ensure that jobs can be created. Thanks. May 1, 2025 at 9:39 AM, Mr.Miti (미티) FA : I found no error, I restarted the port, it sent the request again. ACS OK. Note: there are very few empty magazines on the robot ports, only the plates are waiting for the full magazine to come back. May 1, 2025 at 10:05 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Reel stk C51 MCP AP error! Thanks May 1, 2025 at 10:08 AM, Sazzad Bhai SKon : Could you please confirm the following plates? It is suspected that the plate ID is duplicated. UNKDUP-MLC3117-250501081812A (C1STKC72, 0105702) UNKDUP-MLC3117-250501081812B (C1STKC72, 0200201) please confirm it soon. Thank you May 1, 2025 at 10:09 AM, 최정한.KOVA : 음극 5-1 히터교체완료 진공체크완료 챔버내 건조전 매거진 AGV수동반송 해주세요. May 1, 2025 at 10:38 AM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please share available lot May 1, 2025 at 10:40 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 200 - Anode: 87 VD Pre STK > VD - Cathode: 0 - Anode: 01 VD Post STK > Stacking - Cathode: 52 - Anode: 243 GF NC reel Available lot - CA: 03 - AN: 71 Thank you May 1, 2025 at 10:46 AM, Yon Ko/연커/ : C1STKA72 FORK#1 Origin Fail Error check it please. May 1, 2025 at 10:50 AM, 이민재 : @FA E0CNVC52 RTV 정지 상태인데 확인부탁드립니다 May 1, 2025 at 10:59 AM, Andrea Zentay : @FA Szeretnénk segítséget. VD CA Stocker#2 MCS Buzzer.( Error code 9004) Köszönjük May 1, 2025 at 11:00 AM, Nguyên : NC CA GF Robot#2 Error May 1, 2025 at 11:07 AM, Shahbaz 샤바즈 MCS/RTD : @FA please check C1STKC71_C02 LOAD OVERSIZE ERROR Thanks May 1, 2025 at 11:11 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca Reel RTV C52, it’s stopped with a tray. Thanks May 1, 2025 at 11:19 AM, Eduard SL Shift A : Line 5 ST 12 AGV 8 stopped. please check May 1, 2025 at 11:40 AM, 이민재 : Pls check NC AN AGV#4 May 1, 2025 at 11:44 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please remove one plate from VD Ca 6-10 and LR again for half chamber. Also please confirm the chamber VD Ca 4-1, 4-5 and 6-6. They are showing only one plate inside. Thank you May 1, 2025 at 11:45 AM, 안종수 : AGV #4 Job duplication is causing errors. Please delete the job. May 1, 2025 at 11:58 AM, 이한웅(삼구) : @Jun(정우준)_SKOH FA NC Ca 2번 로봇 포트 2개 문제 있어서 정지하신 건가요? 1번 로봇 P11 포트 풀매거진 창고 투입 안되고 있습니다. 확인 부탁드립니다. May 1, 2025 at 11:59 AM, Jun(정우준)_SKOH FA : Day shift FA Schedule Date: 2025.05.01 Time:06:00-18:00 1. Lee jubong 2. Ji seokbeom Köszönöm szépen May 1, 2025 at 11:59 AM, Jun(정우준)_SKOH FA : @이주봉PM LEE JUBONG(FA) 확인부탁드립니다 ~! May 1, 2025 at 12:01 PM, 하연철(HA YEONCHEOL)/ : 투입 확인 하였습니다. May 1, 2025 at 12:14 PM, 하연철(HA YEONCHEOL)/ : @MCS data needs to be changed C0PVC020 UNKPL20250501103108 MLC1179 MC 1469, 1212, 5297, 3235, 2577, 2185 May 1, 2025 at 12:17 PM, Shahbaz 샤바즈 MCS/RTD : This is carrier Id read fail so it should be read from manual port. Please return it to the stocker. May 1, 2025 at 1:43 PM, Eduard SL Shift A : Line 5-6 ST AN magazine delivery is not available May 1, 2025 at 1:50 PM, 이주봉PM LEE JUBONG(FA) : I solved it May 1, 2025 at 1:51 PM, Eduard SL Shift A : Thank you May 1, 2025 at 2:05 PM, KIM SEYEON [김세연]_FA invited 김욱경. May 1, 2025 at 2:05 PM, KIM SEYEON [김세연]_FA : . May 1, 2025 at 2:10 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 200 - Anode: 96 VD Pre STK > VD - Cathode: 03 - Anode: 00 VD Post STK > Stacking - Cathode: 19 - Anode: 214 GF NC reel Available lot - CA: 05 - AN: 64 Thank you May 1, 2025 at 2:11 PM, KIM SEYEON [김세연]_FA : @최정한.KOVA 과장님 혹시 저희 vd 에서 LR 할때 hmi 에서 특정 port (예를들면 p01/p02 1set만) 선택해서 요청하는 기능있나요? May 1, 2025 at 2:33 PM, 이도형 (Lee) : NC CA GF Robot#1 Error May 1, 2025 at 2:34 PM, 이도형 (Lee) : NC CA GF AGV #9 Error May 1, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 1, 2025 at 2:50 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check May 1, 2025 at 2:51 PM, Mr.Miti (미티) FA : On my way May 1, 2025 at 2:52 PM, Mr.Miti (미티) FA : Both robot working. May 1, 2025 at 3:31 PM, P.Bence A SSL : L6 stacking agv5 stop please check Thank you ! May 1, 2025 at 3:44 PM, Eduard SL Shift A : Line 5-6 ST AN magazine delivery is not available. please check .Tank you May 1, 2025 at 3:45 PM, 임석호(Henry) : 안녕하세요 5라인 6라인 ST An 매거진이 많이 부족합니다 반송 가능자재는 많이있는걸로 보이는데 확인 부탁 드립니다. May 1, 2025 at 4:04 PM, Nguyên : C1STKA72-STK-MCP#2 error. please check for me May 1, 2025 at 5:19 PM, Eduard SL Shift A : Line 6ST 6 AGV2 stopped please check May 1, 2025 at 5:26 PM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. May 1, 2025 at 5:26 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKA72 “MCP Safety relay off” Thanks May 1, 2025 at 5:30 PM, Yon Ko/연커/ : Technician working on it. May 1, 2025 at 5:44 PM, 안종수 : VD STKC71 Lower Date Mismatch error. Please check. @FA May 1, 2025 at 5:44 PM, KIM SEYEON [김세연]_FA : @이한웅(삼구) 크레인이 매거진을 쳐서 손상된 매거진 플레이트를 인계해 드렸습니다. 혹시 폐기가 필요하면 매거진 번호를 공유 부탁드립니다. May 1, 2025 at 5:44 PM, 이주봉PM LEE JUBONG(FA) : @심재훈 @KIM SEYEON [김세연]_FA @이한웅(삼구) @정은탁 (Jung EunTak) MLA4188 Full magazine 6EA VD 후창고 rack 내부에서 크레인 포크 충돌로 인한 품질검사가 필요합니다. 해당 메거진 정은탁 주임에게 인계 했습니다. May 1, 2025 at 5:45 PM, 이한웅(삼구) : 네 알겠습니다. May 1, 2025 at 5:48 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Load oversize error! May 1, 2025 at 6:07 PM, Debreczeni Ármin : Good evening as I see AN materials are moving. Crane and storage working well now? May 1, 2025 at 6:08 PM, KIM SEYEON [김세연]_FA : now working May 1, 2025 at 6:09 PM, Debreczeni Ármin : Its good but most of the AGV's are just standing. May 1, 2025 at 6:15 PM, VK (mcs) : @ACS Please check stacking line C0SGV001 is not online May 1, 2025 at 6:18 PM, Csanálosi Gábor FA : Solved May 1, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Czeilinger Krisztián, Pálosi Róbert, Rácz Dániel --------------- Assy GF (3): Kovács Ágnes, Böröcz Tamás, Csanálosi Gábor --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 1, 2025 at 6:22 PM, Shahbaz 샤바즈 MCS/RTD invited Hmyang(Hungary). May 1, 2025 at 6:30 PM, 김수민 : Plz check AN vd agv#8 May 1, 2025 at 6:31 PM, Dariimaa/다리마/Ivancsa : Sorry normal May 1, 2025 at 6:33 PM, VK (mcs) : @FA Please check cathode Reel STK C51 MCP AP error. May 1, 2025 at 6:35 PM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca E0STKC51 crain is stopped and reel conveyors error. Please check. May 1, 2025 at 6:36 PM, Debreczeni Ármin : Sziasztok manuálisan kell kivennünk anyagot a sorokra May 1, 2025 at 6:38 PM, Debreczeni Ármin : Első sorban anode May 1, 2025 at 6:40 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 금일 매거진 출고 도와주실분 카톡초대 및 연락처 공유해주세요. May 1, 2025 at 6:43 PM, Dariimaa/다리마/Ivancsa : @mcs good evening Delete job C6STM090_P01 because it has a full material on it. Thank you! May 1, 2025 at 6:44 PM, VK (mcs) : Checking May 1, 2025 at 6:46 PM, VK (mcs) : MLC4112 canceled May 1, 2025 at 6:52 PM, KIM SEYEON [김세연]_FA invited FACS_SEOUNGMIN SON. May 1, 2025 at 6:52 PM, KIM SEYEON [김세연]_FA : @Dear stack shift leader please call @FACS_SEOUNGMIN SON when you need magazine from storage. May 1, 2025 at 6:53 PM, Dariimaa/다리마/Ivancsa : Thank you! May 1, 2025 at 6:53 PM, KIM SEYEON [김세연]_FA : please do not operate kiosk. May 1, 2025 at 6:54 PM, Dariimaa/다리마/Ivancsa : Should I return it to STK? May 1, 2025 at 6:57 PM, VK (mcs) : Yes please May 1, 2025 at 6:59 PM, VK (mcs) : @FA Please check Cathode conveyor E0CNVC52 RTV Runtime over and data mismatch on track 9024. May 1, 2025 at 7:08 PM, M.Ferenc "B"Nc/Vd SL : Probléma ugyanaz. RTV stop. May 1, 2025 at 7:11 PM, Böröcz Tamás : Látom én is May 1, 2025 at 7:13 PM, FACS_SEOUNGMIN SON : 수동 출고시 연락 바립니다. May 1, 2025 at 7:14 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity May 1, 2025 at 7:15 PM, Noémi (소미) : Ha szükség van magazin manuális kivételre kérlek vegyétek fel velem a kapcsolatot. May 1, 2025 at 7:22 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 189 - Anode: 71 VD Pre STK > VD - Cathode: 01 - Anode: 17 VD Post STK > Stacking - Cathode: 24 - Anode: 197 May 1, 2025 at 7:35 PM, 방혁 PM(Bang.Hyuk) FA : GF ST 제조 삼구분 누구신가요 May 1, 2025 at 7:37 PM, 조범희 : 네 May 1, 2025 at 7:38 PM, 방혁 PM(Bang.Hyuk) FA : 금일 수동출고시 @FACS_SEOUNGMIN SON 이분에게 문의주세요! May 1, 2025 at 7:38 PM, 조범희 : 네 감사합니다 May 1, 2025 at 7:42 PM, Csanálosi Gábor FA : @vk in mcs C1STKA71 is red, but no errors there, can you reset that alarm? May 1, 2025 at 7:43 PM, 방혁 PM(Bang.Hyuk) FA : Please open the crane door and try to check it inside May 1, 2025 at 7:49 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 190 - Anode: 66 VD Pre STK > VD - Cathode: 03 - Anode: 16 VD Post STK > Stacking - Cathode: 21 - Anode: 194 Reel STK > Notching Anode:48 Cathode:00 May 1, 2025 at 7:51 PM, Csanálosi Gábor FA : Checked inside, found nothing, after i did homeing on c01, that solved it, now cranes working, and in green state. May 1, 2025 at 7:53 PM, 방혁 PM(Bang.Hyuk) FA : Thank you!! May 1, 2025 at 8:13 PM, Betti B SL : L6 az #1 AGV meg állt May 1, 2025 at 8:16 PM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. May 1, 2025 at 8:17 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Can you check MCS command for ST 5,6L? May 1, 2025 at 8:17 PM, VK (mcs) : Checking May 1, 2025 at 8:17 PM, 방혁 PM(Bang.Hyuk) FA : UR was generated, but AGV did not move May 1, 2025 at 8:19 PM, VK (mcs) : There is only 2 jobs. Which equipment did you apply UR? May 1, 2025 at 8:21 PM, 방혁 PM(Bang.Hyuk) FA : C6STM200_P02 C6STM160_P01 C6STM050_P01 May 1, 2025 at 8:23 PM, Debreczeni Ármin invited Kristina. May 1, 2025 at 8:23 PM, FACS_SEOUNGMIN SON : 양극 메뉴얼 몇 개 진행 하면 될까요? May 1, 2025 at 8:23 PM, VK (mcs) : There is no UR Last request for ports was LR that materials were successfully delivered. May 1, 2025 at 8:23 PM, 조범희 : 이제 4라인 음극만 채워지면될것같습니다 May 1, 2025 at 8:24 PM, 방혁 PM(Bang.Hyuk) FA : @FACS_SEOUNGMIN SON 음극만 더 출고 진행해주세요 May 1, 2025 at 8:24 PM, 조범희 : 현재 양극은 충분합니다 May 1, 2025 at 8:24 PM, FACS_SEOUNGMIN SON : 음극은 몇 개 정도 진행 할까요? May 1, 2025 at 8:24 PM, Csanálosi Gábor FA : @VK (mcs) VD CA 5-6, the agv took out only 2 magazines instead all four. Can you check it please? May 1, 2025 at 8:25 PM, VK (mcs) : Checking May 1, 2025 at 8:26 PM, 방혁 PM(Bang.Hyuk) FA : CIM seems to have a UR command. Is there any problem with MCS? May 1, 2025 at 8:27 PM, 방혁 PM(Bang.Hyuk) FA : @Dariimaa/다리마/Ivancsa Can you check GF ST 6L AGV7? May 1, 2025 at 8:28 PM, Dariimaa/다리마/Ivancsa : @mcs Delete job C6STM120_P01 because it has a full material on it. Thank you! May 1, 2025 at 8:28 PM, VK (mcs) : There is no problem in MCS May 1, 2025 at 8:28 PM, 방혁 PM(Bang.Hyuk) FA : Thank you May 1, 2025 at 8:29 PM, VK (mcs) : Can you apply again UR? May 1, 2025 at 8:29 PM, VK (mcs) : Checking May 1, 2025 at 8:31 PM, VK (mcs) : Job canceled, Please send it back to STK May 1, 2025 at 8:35 PM, VK (mcs) : Do you mean AGV just delivered 2 carriers to VD right? May 1, 2025 at 8:57 PM, M.Ferenc "B"Nc/Vd SL : @FA NC Ca Agv#9 stopped near 4/3 machine. May 1, 2025 at 9:06 PM, Csanálosi Gábor FA : The info i got was agv did not unload 2, but could be misunderstanding due languase issues, so could you right. You see better those 2 magazines status than i, maybe them before drying, in that case need 2 more to start drying indeed. :) May 1, 2025 at 9:11 PM, VK (mcs) : Unfortunately since befor yesterday when AGV took carriers from VD, information remains in MCS and RTD due to AGV’s error and it makes half chamber issue. Problem is under investigation. Thx May 1, 2025 at 9:17 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD AN #32(4-5) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 1, 2025 at 9:18 PM, Böröcz Tamás : Úton May 1, 2025 at 9:34 PM, Dariimaa/다리마/Ivancsa : Sorry, the door to VD AN 4-5 is closed. May 1, 2025 at 9:35 PM, M.Ferenc "B"Nc/Vd SL : Okay! Sorry! Thank you! I'll go and check soon. May 1, 2025 at 10:30 PM, M.Ferenc "B"Nc/Vd SL : Problem solved. Thank you! May 1, 2025 at 10:33 PM, M.Ferenc "B"Nc/Vd SL : @mcs Do you have any information about why reels are arriving very slowly on the Nc Cathode site? May 1, 2025 at 10:35 PM, VK (mcs) : Checking May 1, 2025 at 10:36 PM, VK (mcs) : There was some transition inside the STK and it is almost done. Material will deliver soon. May 1, 2025 at 10:38 PM, 방혁 PM(Bang.Hyuk) FA : Can you check available lot for NC CA? May 1, 2025 at 10:39 PM, M.Ferenc "B"Nc/Vd SL : Thank you very much for the information. May 1, 2025 at 10:43 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 169 - Anode: 34 VD Pre STK > VD - Cathode: 03 - Anode: 21 VD Post STK > Stacking - Cathode: 34 - Anode: 206 Reel STK > Notching Anode:56 Cathode:02 May 1, 2025 at 11:19 PM, Lan Nhi : @MCS hi. please check chamber 4-3 and chamber 5-6 VD CA, only half chamber is loaded. thanks May 1, 2025 at 11:25 PM, 전병오 invited 김현진. May 1, 2025 at 11:34 PM, Kristina : @Fa We need anode and cathode "magazines" on line 4. Stacking May 1, 2025 at 11:35 PM, Debreczeni Ármin : @FACS_SEOUNGMIN SON May 1, 2025 at 11:39 PM, VK (mcs) : Can you please tell me which carriers are in VD? May 1, 2025 at 11:44 PM, Noémi (소미) : Szia, megyünk May 1, 2025 at 11:45 PM, Noémi (소미) : Mennyi magazint kell kiszedni és melyik oldalon? @Debreczeni Ármin May 1, 2025 at 11:45 PM, Lan Nhi : #30(4-3) & #42(5-6) May 1, 2025 at 11:47 PM, VK (mcs) : I am checking But in 5/6 there is no carrier according to ACS 4/3 there is only 1 carrier. Please confirm carrier ID inside the machine. May 1, 2025 at 11:50 PM, Debreczeni Ármin : Fa members goint to take out 10 10 plate May 1, 2025 at 11:50 PM, Lan Nhi : Yes May 2, 2025 at 12:00 AM May 2, 2025 at 12:00 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16100) Carrier is not moving. May 2, 2025 at 12:06 AM, Böröcz Tamás : Solved May 2, 2025 at 12:11 AM, 김수민 : @VK (mcs) Plz check Ca vd #5-7(p03,04) half chamber May 2, 2025 at 12:13 AM, 김수민 : @VK (mcs) Plz check the materials that can be transported to CA VD 3-2,3 May 2, 2025 at 12:15 AM, VK (mcs) : I cleared RTD And now 2 carriers have been assigned to VD cathode 5/7 ports 1 & 2 May 2, 2025 at 12:17 AM, VK (mcs) : 3 carriers are available MLC3091-MLC2058-MLC4024 May 2, 2025 at 12:19 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) VD AN chamber 4-5 5-1 5-4 6-3 have only 2 carriers. Please check. Thank you! May 2, 2025 at 12:30 AM, Betti B SL : L6 #9 AGV hibával meg állt May 2, 2025 at 12:32 AM, VK (mcs) : This message was deleted. May 2, 2025 at 12:32 AM, VK (mcs) : This message was deleted. May 2, 2025 at 12:33 AM, VK (mcs) : Carriers for 4/5 and 5/1 are on the way Please confirm carrier ID on 6/3 and 5/4 May 2, 2025 at 12:41 AM, Noémi (소미) : @Debreczeni Ármin Katódon mikorra várható az operátorok érkezése a 10 magazin kivétele miatt? May 2, 2025 at 12:42 AM, Noémi (소미) : Köszönöm szépen. May 2, 2025 at 12:46 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 188 - Anode: 30 VD Pre STK > VD - Cathode: 01 - Anode: 36 VD Post STK > Stacking - Cathode: 14 - Anode: 197 Reel STK > Notching Anode:65 Cathode:18 May 2, 2025 at 12:52 AM, Dariimaa/다리마/Ivancsa : This message was deleted. May 2, 2025 at 12:53 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) VD CA chamber 4-7 has only 2 carriers. Please check. Thank you! May 2, 2025 at 12:57 AM, VK (mcs) : RTD cleared. Carriers on the way May 2, 2025 at 1:14 AM, Debreczeni Ármin : Elvileg mentek May 2, 2025 at 1:15 AM, Debreczeni Ármin : Vagy azóta se? May 2, 2025 at 1:16 AM, Noémi (소미) : Most épp várunk egy ideje, de az előbb itt voltak May 2, 2025 at 1:17 AM, Noémi (소미) : Itt vannak. May 2, 2025 at 1:19 AM, Csanálosi Gábor FA : Anything new with this issue? @VK (mcs) May 2, 2025 at 1:22 AM, VK (mcs) : Yesterday we informed to ACS manager. Korean managers are investigating it. May 2, 2025 at 1:29 AM, Csanálosi Gábor FA : Thank you May 2, 2025 at 1:30 AM, Csanálosi Gábor FA : @Noémi (소미) May 2, 2025 at 1:33 AM, Noémi (소미) : Köszönöm szépen May 2, 2025 at 1:37 AM, Noémi (소미) : @Yosyp Tovt @Mykhailo We made orders in the GF VD CA warehouse, so we need operators. Thank you. May 2, 2025 at 2:23 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B @Csanálosi Gábor FA Can you check C1CNV072?? May 2, 2025 at 2:24 AM, Csanálosi Gábor FA : Going to c72, probably thats couse problem May 2, 2025 at 2:25 AM, 방혁 PM(Bang.Hyuk) FA : Okay May 2, 2025 at 2:37 AM, Debreczeni Ármin : Agv #7 stopped front of p09 May 2, 2025 at 2:39 AM, Dariimaa/다리마/Ivancsa : Solved May 2, 2025 at 2:44 AM, Lan Nhi : @FA plz Nc/An 4-2 agv#5 error May 2, 2025 at 2:47 AM, Noémi (소미) : @Yosyp Tovt @Mykhailo We need operator in the GF VD Cathode side. Thank you. May 2, 2025 at 2:49 AM, Debreczeni Ármin : Anodeon vagyunk most May 2, 2025 at 2:49 AM, Lan Nhi : @FA plz. check for me An 4-3 is not provided with 30 minute ammo. thanks May 2, 2025 at 2:53 AM, Noémi (소미) : Még nem tudták befejezni hiba miatt a katódot ezért oda kéne először operátori segítség. Aztán kéne majd anódra is menni. May 2, 2025 at 2:54 AM, Csanálosi Gábor FA : All good now May 2, 2025 at 2:58 AM, Debreczeni Ármin : Oke May 2, 2025 at 2:59 AM, Debreczeni Ármin : @Kristina first Ca please May 2, 2025 at 2:59 AM, M.Ferenc "B"Nc/Vd SL : @FA RTV problem. Reels don't come out to the port, they stand in line. May 2, 2025 at 3:02 AM, Csanálosi Gábor FA : Ca? May 2, 2025 at 3:02 AM, M.Ferenc "B"Nc/Vd SL : Igen. Bocsánat. May 2, 2025 at 3:03 AM, Debreczeni Ármin : Milyen probléma van? Meg van esetleg info arrol h mennyi idő? Köszönöm May 2, 2025 at 3:14 AM, 정은탁 (Jung EunTak) : @FA NC An' GF Robot#3 Error May 2, 2025 at 3:15 AM, Böröcz Tamás : Checking after CVC52 May 2, 2025 at 3:48 AM, Debreczeni Ármin : @VK (mcs) please send me lot quantity thank you May 2, 2025 at 3:51 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 203 - Anode: 41 VD Pre STK > VD - Cathode: 00 - Anode: 41 VD Post STK > Stacking - Cathode: 14 - Anode: 192 Reel STK > Notching Anode:81 Cathode:26 May 2, 2025 at 4:07 AM, Lan Nhi : @MCS please check chamber 4-2 VD CA, only half chamber is loaded. thanks May 2, 2025 at 4:10 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA 4-3 machine AGV #3 while unloading, knocked over the magazines. May 2, 2025 at 4:12 AM, VK (mcs) : RTD cleared Material will be delivered May 2, 2025 at 4:18 AM, M.Ferenc "B"Nc/Vd SL : @Csanálosi Gábor FA @Böröcz Tamás Légyszi segítsetek. May 2, 2025 at 4:20 AM, Böröcz Tamás : Éppen van más is May 2, 2025 at 4:20 AM, Böröcz Tamás : De szíves vagyok May 2, 2025 at 4:20 AM, 방혁 PM(Bang.Hyuk) FA : Omw May 2, 2025 at 4:20 AM, M.Ferenc "B"Nc/Vd SL : Hát jól van May 2, 2025 at 4:21 AM, M.Ferenc "B"Nc/Vd SL : Nem azt írtam rohanj ide most. May 2, 2025 at 4:30 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 ( 16144) Carriers are stopped Asap. Thx May 2, 2025 at 4:36 AM, Dariimaa/다리마/Ivancsa : Solved May 2, 2025 at 4:48 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) VD AN chamber 4-6 5-3 have also 6-10 only 2 carriers. Please check. Thank you! May 2, 2025 at 5:02 AM, VK (mcs) : RTD cleared. Materials are on the way for all. May 2, 2025 at 5:12 AM, 김수민 : @KIM SEYEON [김세연]_FA @심재훈 NC CA 4-3 AGV#3 매거진 UR작업중 매거진 전도 발생 - QC 확인 후 양품은 건조 진행, 불량은 현장 보관 하겠습니다. - MC2064, 2065, 4210, 4455, 1563 May 2, 2025 at 5:29 AM, VK (mcs) : @FA Please check Cathode Reel STK C52 There is no error but cranes are stopped. May 2, 2025 at 5:31 AM, Csanálosi Gábor FA : Moving now May 2, 2025 at 5:37 AM, 김수민 : Plz recheck May 2, 2025 at 5:38 AM, M.Ferenc "B"Nc/Vd SL : RTV nem adagol kifelé. 5 reel-t látok, de nem adja ki őket. May 2, 2025 at 5:39 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 208 - Anode: 33 VD Pre STK > VD - Cathode: 03 - Anode: 36 VD Post STK > Stacking - Cathode: 14 - Anode: 183 Reel STK > Notching Anode:110 Cathode:27 May 2, 2025 at 5:39 AM, VK (mcs) : Please wait. I am monitoring it. It will be okay after a few minutes. Thx May 2, 2025 at 5:56 AM, 안종수 : VD AN #1 AGV ERROR. Please check @fa May 2, 2025 at 6:02 AM, duzzaman Md (MCS) : This message was deleted. May 2, 2025 at 6:02 AM, duzzaman Md (MCS) : @FA Kindly check C1STKA71_P16 LIGHT CURTAIN ERROR THANKS May 2, 2025 at 6:05 AM, 안종수 : NC CA #3 ROBOT ERROR. Please check @FA May 2, 2025 at 6:09 AM, FACS_JaewonShin : ■ 2nd May Ivancsa FA CS - Withes service Hungary Morning shift(06:00 - 18:00) : 1 people □Electrode / Assembly - PLC control 1 Jaewon shin May 2, 2025 at 6:11 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2):Novák Károly, Nagy Gábor Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Kovács Szabolcs 1F: Kasztel Balázs, Novák Zoltán Modul(2): Magyar Balázs, Martina Dávid, May 2, 2025 at 6:19 AM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.02 Time:06:00-18:00 1. Lee jubong 이주봉PM 2. Ji seokbeom 지석범PM Köszönöm szépen May 2, 2025 at 6:22 AM, duzzaman Md (MCS) : @FA Please check Cathode conveyor E0CNVC52 RTV Its OOS May 2, 2025 at 6:23 AM, Simon Dávid D SL NC : @MCS hello NC CA oldalon nagyon kevés a reel,megnéznéd nekem mi az oka,köszönöm May 2, 2025 at 6:24 AM, duzzaman Md (MCS) : Also please check C1STKC71_C02 FORK #1 CENTRE ERROR WHEN CRANE ACTIVE THANKS May 2, 2025 at 6:28 AM, duzzaman Md (MCS) : There are active jobs. But E0CNVC52, RTV is OOS May 2, 2025 at 6:32 AM, Ivan Chobitko : Hello @fa Please check AGV Line ST 6#11 Traffic is jamming May 2, 2025 at 6:33 AM, Ivan Chobitko : AGV3 May 2, 2025 at 6:39 AM, 이주봉PM LEE JUBONG(FA) : [중요 공지] 창고 RACK 내 화물 데이터 삭제 관련 안내 안녕하세요. 2025년 5월 1일, GF 음극 후창고 내 RACK에 위치한 화물 데이터가 SCS 오퍼레이터 계정으로 삭제되는 일이 발생하였습니다. 이로 인해 실제로 창고 RACK에 존재하는 메거진과 충돌이 발생하였습니다. 이에 따라, 향후에는 FA에서 직접 출고를 진행하고자 하며, 출고가 필요한 경우에는 카카오톡 방을 통해 사전 연락을 부탁드립니다. 혼란을 드려 죄송하며, 보다 정확한 자재 관리를 위해 협조 부탁드립니다. 감사합니다. May 2, 2025 at 6:46 AM, Yulya Kirsanova : Hello, we need material for line 4. @fa May 2, 2025 at 6:47 AM, Simon Dávid D SL NC : @duzzaman Md (MCS) GF NC CA reel shortage 04_01 06:30~ 04_02 06:35~ 05_03 06:26~ May 2, 2025 at 6:50 AM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) 피엠님 지원부탁드립니다 May 2, 2025 at 6:53 AM, 이주봉PM LEE JUBONG(FA) : 네 확인 완료. 반송가능 자재 18개 바로 출고 될수있도록 할게요. May 2, 2025 at 7:01 AM, duzzaman Md (MCS) : Everything is okay from MCS side. Jobs are being created. Thanks May 2, 2025 at 7:08 AM, 안종수 : NC AN #4AGV 5-1 FULL 매거진 UR 중 ERROR로 멈춰 있습니다. 확인 부탁 드립니다. May 2, 2025 at 7:10 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ May 2, 2025 at 7:10 AM, Yon Ko/연커/ : Already solved. May 2, 2025 at 7:11 AM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 199 - Anode: 51 VD Pre STK > VD - Cathode: 01 - Anode: 54 VD Post STK > Stacking - Cathode: 09 - Anode: 173 Reel STK > Notching Anode:109 Cathode: 16 May 2, 2025 at 7:16 AM, 안종수 : This message was deleted. May 2, 2025 at 7:17 AM, 안종수 : NC AN #9 AGV ERROR Please check @FA May 2, 2025 at 8:13 AM, 이도형 (Lee) : VD AN #2 AGV ERROR Please check May 2, 2025 at 8:24 AM, 이도형 (Lee) : NC AN #2 AGV ERROR Please check May 2, 2025 at 8:33 AM, Sazzad Bhai SKon : @FA Please help to remove duplicated plates from STK and restock. UNKDUP-MLA2077-A (C1STKA72, 0200403) UNKDUP-MLA2077-A (C1STKA72, 0105401) May 2, 2025 at 8:35 AM, Sazzad Bhai SKon : MLA3085-A (C1STKA72, 0200206) MLA3085-B (C1STKA72, 0100603) May 2, 2025 at 8:37 AM, Sazzad Bhai SKon : MLC2094-A (C1STKC72, 0205601) MLC2094-B (C1STKC72, 0205802) May 2, 2025 at 8:38 AM, Sazzad Bhai SKon : MLC3117-A (C1STKC72, 0105702) MLC3117-B (C1STKC72, 0200201) May 2, 2025 at 8:39 AM, Sazzad Bhai SKon : MLC3178-A (C1STKC72, 0200603) MLC3178-B (C1STKC72, 0200104) May 2, 2025 at 8:41 AM, Sazzad Bhai SKon : MLC9106-A (C2STKC72, 0204302) MLC9106-B (C2STKC72, 0100201) May 2, 2025 at 8:54 AM, duzzaman Md (MCS) : @FA PLEASE CHECK E0STKC52_C02 Crane oversize error (right) Thank you May 2, 2025 at 9:01 AM, 최정한.KOVA : GF VD. CA 6-6 우측하단 안착불량입니다. AGV. 수동 재안착해주세요 May 2, 2025 at 9:03 AM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 207 - Anode: 47 VD Pre STK > VD - Cathode: 03 - Anode: 65 VD Post STK > Stacking - Cathode: 15 - Anode: 171 Reel STK > Notching Anode:120 Cathode: 06 May 2, 2025 at 9:07 AM, Simon Dávid D SL NC : @FA hello NC CA #4 #7 AGV error ,megnéznétek köszönöm May 2, 2025 at 9:11 AM, Sazzad Bhai SKon : Plate MLA4089 is duplicated in two locations. Location 1: C1STKA71, 0104904 Location 2: C1STKA72, 0100405 please rack out from manual port, if plate ID is different restock. Thank you May 2, 2025 at 9:15 AM, Sazzad Bhai SKon : UNKDUP-MLC3147-250430170709B (C1STKC72, 0100402) May 2, 2025 at 9:17 AM, Sazzad Bhai SKon : Plate MLA4239 is duplicated in two locations. Location 1: C1STKA71, 0205102 Location 2: C1STKA72, 0100107 please rack out from manual port, if plate ID is different restock. Thank you May 2, 2025 at 9:18 AM, Sazzad Bhai SKon : Plate MLA0218 is duplicated in two locations. Location 1: C1STKA72, 0105705 Location 2: C1STKA72, 0105503 please rack out from manual port, if plate ID is different restock. Thank you May 2, 2025 at 9:37 AM, KIM SEYEON [김세연]_FA : @하연철(HA YEONCHEOL)/ 조장님 해당 플레이트 확인하여 두개이면 제조에 인계해주시고, 데이타 문제이면 다시 바코드 찍고 창고에 입고 부탁드립니다. May 2, 2025 at 9:37 AM, 하연철(HA YEONCHEOL)/ : 네 May 2, 2025 at 9:58 AM, P.Bence A SSL : Check again please May 2, 2025 at 10:01 AM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 209 - Anode: 47 VD Pre STK > VD - Cathode: 01 - Anode: 76 VD Post STK > Stacking - Cathode: 06 - Anode: 158 Reel STK > Notching Anode:116 Cathode: 19 Thanks ! May 2, 2025 at 10:17 AM, duzzaman Md (MCS) : @FA Kindly check C1STKC72_P14 LIGHT CURTAIN ERROR THANKS May 2, 2025 at 10:24 AM, Zsurbej Zsolt F.A. : A Korean technician is working on it. May 2, 2025 at 10:27 AM, Dániel Hufnágel : @duzzaman Md (MCS) Please share aviable lot for notching line(reels), every 30 minute! Both side, thank you! May 2, 2025 at 10:34 AM, duzzaman Md (MCS) : Notching Reel Update AN: 111 CA: 4 Thanks May 2, 2025 at 11:10 AM, duzzaman Md (MCS) : Notching Reel Update AN: 111 CA: 2 Thanks May 2, 2025 at 11:12 AM, 안종수 : @FA NC AN #8 AGV ERROR. Please check May 2, 2025 at 11:23 AM, 안종수 : It has recurred. Please check. There is only one empty magazine. May 2, 2025 at 11:26 AM, 안종수 : @이주봉PM LEE JUBONG(FA) PM님 헝가리 테크니션 와서 조치중인데 잘 안되네요. 공매거진 공급 안되서 5-3호기 설비 정지했습니다. 확인 부탁 드립니다. May 2, 2025 at 11:33 AM, duzzaman Md (MCS) : @FA Kindly check C1STKA71_P13 LIGHT CURTAIN 01 ERROR THANKS May 2, 2025 at 11:38 AM, Dániel Hufnágel : @Péti Gábor @P.Bence A SSL anód 72es raktárat koreai telepítő cégesek megállították infó nincs mikor indítsák May 2, 2025 at 11:46 AM, duzzaman Md (MCS) : Notching Reel Update AN: 117 CA: 11 Thanks May 2, 2025 at 11:47 AM, P.Bence A SSL : Most indítják May 2, 2025 at 11:56 AM, Sazzad Bhai SKon : Crane: E0STKC51_C02 oos since 11.53 E0STKA33_C01 oos since 27/04 08.46 May 2, 2025 at 12:00 PM, 하연철(HA YEONCHEOL)/ : MLC2094-A 0205601 When checking the actual product, check MLC3224. When re-reading BCR and inputting, MCS BUZZER ERROR occurs. Request for confirmation. May 2, 2025 at 12:03 PM, Sazzad Bhai SKon : This is VD material. If you want to restock and use manual port, please try from pre VD STK Manual port. If auto port please try with AGV > post VD stk May 2, 2025 at 12:05 PM, 하연철(HA YEONCHEOL)/ : I'll put it in c1stkc71. May 2, 2025 at 12:05 PM, Sazzad Bhai SKon : Yes please use manual port. Thank you May 2, 2025 at 12:17 PM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 198 - Anode: 34 VD Pre STK > VD - Cathode: 03 - Anode: 77 VD Post STK > Stacking - Cathode: 11 - Anode: 154 Reel STK > Notching Anode:122 Cathode: 19 Thanks ! May 2, 2025 at 1:49 PM, Yon Ko/연커/ : This message was deleted. May 2, 2025 at 1:50 PM, Yon Ko/연커/ : Hello @MCS Could u check this VD Anode chambers 5-6, 5-7, 5-8 thank you! May 2, 2025 at 2:08 PM, KIM SEYEON [김세연]_FA : @Dear shift leader If you need stack station material, please contact RTD/MCS OP like below. @mcs rtd please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate RTD will send you materials. Receive them at the VD storage manual port as usual. please don't touch any kiosk for load material by operators. strictly prohibited. Thanks. Ivancsa FA Seyeon Kim @KIM SEYEON [김세연]_FA May 2, 2025 at 2:08 PM, duzzaman Md (MCS) : This message was deleted. May 2, 2025 at 2:08 PM, duzzaman Md (MCS) : This message was deleted. May 2, 2025 at 2:12 PM, duzzaman Md (MCS) : For 5-6, if P04 is physically empty, please send P03 to the STK and Press LR again. For 5'8, its the same. If P02 is empty physically, please send the P01 material to STK and press LR. For 5-7, job has already been created. May 2, 2025 at 2:14 PM, duzzaman Md (MCS) : Could you also please confirm the following --- AN 4-7, P03 & P04 5-9, P03 & P04 6-3, P01 & P02 CA 6-7, P03 & P04 Thanks May 2, 2025 at 2:19 PM, Sazzad Bhai SKon : Hello PM, Excuse me , The destination for stacking plates isn't it CNV manual port C1CNV072_M01 Or C1CNV072_M04 May 2, 2025 at 2:22 PM, 안진모 An Jin Mo invited 김정희(Jeong hee FA). May 2, 2025 at 2:31 PM, P.Bence A SSL : Please check anode VD-ST warehouse tray data mismatch alarm May 2, 2025 at 2:32 PM, Sazzad Bhai SKon : Location please May 2, 2025 at 2:33 PM, P.Bence A SSL : C1CNV072 CV01 May 2, 2025 at 2:36 PM, P.Bence A SSL : Section 2 CV10 I think May 2, 2025 at 2:39 PM, Sazzad Bhai SKon : Please try again May 2, 2025 at 2:39 PM, Dániel Hufnágel : Its done May 2, 2025 at 2:43 PM, 이주봉PM LEE JUBONG(FA) : @duzzaman Md (MCS) @Sazzad Bhai SKon C1STKA72_M01 Full magazine plate. 5EA I would like to request the shipment. May 2, 2025 at 2:44 PM, Sazzad Bhai SKon : We're processing May 2, 2025 at 2:49 PM, duzzaman Md (MCS) : Shipment has been created. Thanks ! May 2, 2025 at 2:54 PM, Yon Ko/연커/ : @MCS Could you repeat the command again, please? VD CA AGV3. Unload it to chamber 6-7 P04. May 2, 2025 at 2:54 PM, Sazzad Bhai SKon : @FA There are 16 UNKDUP plates on the STK. Could you please rack out in manual port and restock? May 2, 2025 at 2:59 PM, 이주봉PM LEE JUBONG(FA) : It is in progress May 2, 2025 at 3:04 PM, 전 운 (Jeon Woon) : This message was deleted. May 2, 2025 at 3:22 PM, duzzaman Md (MCS) : The batch was created for P03, Carrier MLC4249 and P04, MLC221 The carrier for P03 is still there but We see the Job for P04 was terminated at 11:52. Thus it's empty. For this type of scenario, please send the odd one, in this case P03 to the STK manually and then press LR. May 2, 2025 at 3:32 PM, P.Bence A SSL : Check please thank you ! May 2, 2025 at 3:38 PM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 17 - Anode: 184 VD Pre STK > VD - Cathode: 95 - Anode: 08 VD Post STK > Stacking - Cathode: 29 - Anode: 157 Reel STK > Notching Anode:119 Cathode: 00 Thanks ! May 2, 2025 at 3:39 PM, P.Bence A SSL : @duzzaman Md (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate Thank you May 2, 2025 at 3:49 PM, duzzaman Md (MCS) : Materials has been released.thanks May 2, 2025 at 4:12 PM, 안종수 : NC CA 6-1 IN PORT ERROR. Please check. @FA May 2, 2025 at 4:13 PM, P.Bence A SSL : Please write only VD Post STK > Stacking - Cathode: - Anode: May 2, 2025 at 4:13 PM, P.Bence A SSL : @duzzaman Md (MCS) May 2, 2025 at 4:14 PM, 안종수 : @FA NC CA #5 AGV ERROR. Please check May 2, 2025 at 4:15 PM, P.Bence A SSL : Write all please sorry thank you ! May 2, 2025 at 4:15 PM, 안종수 : Error occurs during full magazine ur May 2, 2025 at 4:16 PM, 이도형 (Lee) : Solved May 2, 2025 at 4:21 PM, P.Bence A SSL : L6 stacking Agv 4 stop please check thank you ! May 2, 2025 at 4:21 PM, Sazzad Bhai SKon : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 187 - Anode: 15 VD Pre STK > VD - Cathode: 08 - Anode: 106 VD Post STK > Stacking - Cathode: 19 - Anode: 156 Reel STK > Notching Anode:125 Cathode: 00 Thanks ! May 2, 2025 at 4:25 PM, P.Bence A SSL : L5 stacking agv10 stop Please check May 2, 2025 at 4:27 PM, P.Bence A SSL : @duzzaman Md (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : plate Thank you May 2, 2025 at 4:28 PM, P.Bence A SSL : 6 plate * May 2, 2025 at 4:30 PM, P.Bence A SSL : @duzzaman Md (MCS) please send AN stack materials to c1stka72 m01 port Need amount : 5 plate May 2, 2025 at 4:32 PM, Sazzad Bhai SKon : 6 cathode done May 2, 2025 at 4:37 PM, Sazzad Bhai SKon : 5 anode done May 2, 2025 at 5:00 PM, 전 운 (Jeon Woon) : Plz Ca 2 plate more give May 2, 2025 at 5:01 PM, duzzaman Md (MCS) : Okay, sending right now May 2, 2025 at 5:03 PM, 전 운 (Jeon Woon) : This message was deleted. May 2, 2025 at 5:03 PM, 전 운 (Jeon Woon) : Thx! May 2, 2025 at 5:03 PM, duzzaman Md (MCS) : You're welcome. Already initiated transfer. May 2, 2025 at 5:18 PM, 욱 : Please update about 1F storage status too May 2, 2025 at 5:19 PM, 욱 : @KIM SEYEON [김세연]_FA May 2, 2025 at 5:25 PM, duzzaman Md (MCS) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 187 - Anode: 15 VD Pre STK > VD - Cathode: 13 - Anode: 104 VD Post STK > Stacking - Cathode: 08 - Anode: 158 Reel STK > Notching Anode:125 Cathode: 00 Thanks ! May 2, 2025 at 5:46 PM, Yulya Kirsanova : Hello, we need help. C1CNV072-CV01-MCP . Tray Data Mismatch Error. @fa May 2, 2025 at 6:23 PM, VK (mcs) : @FA Please check Anode Post-STK A72 shelves MLA4149(0205102) MLA4103(0105502) Carriers have a transfer command but MCS indicates shelves are out of service. May 2, 2025 at 6:35 PM, Dima Kusyk invited Pavel. May 2, 2025 at 6:38 PM, Dima Kusyk : Please send updated information for STK May 2, 2025 at 6:43 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 180 - Anode: 16 VD Pre STK > VD - Cathode: 16 - Anode: 101 VD Post STK > Stacking - Cathode: 13 - Anode: 162 Reel STK > Notching Anode:123 Cathode: 08 May 2, 2025 at 6:46 PM, Dima Kusyk : @fa @mcs please send CA stack materials to c1stkc72 m01 port. Need amount : 8 plates May 2, 2025 at 6:48 PM, T. Gàbornè C SL NC : Good Afternoon @Fa CA VD#44 machine stop, upper/ right heater NFB OFF status error, please send the mgz Storage. Thank you. May 2, 2025 at 6:55 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir @Shakir (MCS) May 2, 2025 at 6:56 PM, VK (mcs) : Checking May 2, 2025 at 7:04 PM, VK (mcs) : Materials have been released May 2, 2025 at 7:08 PM, QuangPhan : Hello! Good evening! @FA NC AN 4/1 AGV error. Thanks May 2, 2025 at 7:20 PM, Lajos Gábor F.A. : @MCS AN NC AGV7,9 has order to C4NCA010_P03,P04 , but both port still has empty mgz. Could you send them to another port? May 2, 2025 at 7:20 PM, VK (mcs) : Checking May 2, 2025 at 7:21 PM, VK (mcs) : I will send them back to STK May 2, 2025 at 7:22 PM, Lajos Gábor F.A. : Thank you. May 2, 2025 at 7:25 PM, Dima Kusyk : @Mohammad Amir please send AN stack materials to c1stkc72 m01 port. Need amount : 10 plates May 2, 2025 at 7:30 PM, T. Gàbornè C SL NC : @MCS Please check CA reel Storage #52, no move reels. Thanks. May 2, 2025 at 7:32 PM, VK (mcs) : It's working normally, what is the problem? May 2, 2025 at 7:36 PM, VK (mcs) : Materials have been released. May 2, 2025 at 7:59 PM, T. Gàbornè C SL NC : @FA Please check the CA VD 5-line, 6-line , does not pack the AGV. Thx May 2, 2025 at 8:04 PM, VK (mcs) : @FA Please check Cathode reel conveyor RTV does not unload material on the buffer port 10 (9018) May 2, 2025 at 8:05 PM, T. Gàbornè C SL NC : @Fa Ca NC 4#1 gépnél nem jó a mgz betöltés, légyszíves nézzétek meg. Köszönöm szépen. May 2, 2025 at 8:17 PM, T. Gàbornè C SL NC : Gyertek légyszíves. May 2, 2025 at 8:29 PM, Dima Kusyk : Please share updated information for Stacking May 2, 2025 at 8:30 PM, T. Gàbornè C SL NC : @MCS Please check CA reel Storage #51#52, no move reels. Thx May 2, 2025 at 8:31 PM, VK (mcs) : I already asked @FA team to check RTV. They are working on it. Thx May 2, 2025 at 8:37 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 191 - Anode: 22 VD Pre STK > VD - Cathode: 05 - Anode: 106 VD Post STK > Stacking - Cathode: 30 - Anode: 148 Reel STK > Notching Anode:108 Cathode: 34 May 2, 2025 at 8:40 PM, Dima Kusyk : Good! Please send AN, CA materials to c71stkc72 m01 port. Need amount: 8 plates An, 8 plates Ca Thanks. May 2, 2025 at 8:48 PM, VK (mcs) : Materials released May 2, 2025 at 8:59 PM, VK (mcs) : @FA Please check Cathode Pre-STK C71 port 14(9010) It's in manual mode and carrier is waiting. May 2, 2025 at 9:15 PM, T. Gàbornè C SL NC : @Fa Not bringing AGV a mgz, CA NC. please look at why. Thx May 2, 2025 at 9:16 PM, 김지수PM(Gyuri)_FA : Sziasztok Day shift FA Technician Schedule Date: 2025.05.02 Time:18:00-06:00 1. Bang hyuk 2. Kim jisoo Köszönöm szépen May 2, 2025 at 9:18 PM, T. Gàbornè C SL NC : CA 6#2, CA 4#3 May 2, 2025 at 9:24 PM, VK (mcs) : 6/2 material is on way BTW, there is no available material May 2, 2025 at 9:27 PM, VK (mcs) : Carriers in CNV are waiting for FULL MGZ. May 2, 2025 at 9:33 PM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. May 2, 2025 at 9:36 PM, 방혁 PM(Bang.Hyuk) FA : I make C51 C02 inactive @VK (mcs) @FA May 2, 2025 at 9:47 PM, Dima Kusyk : @fa Please check storage STK, Error: tray data mismatch. Thanks May 2, 2025 at 9:51 PM, Dima Kusyk : @VK (mcs) Please send CA, AN materials to c71stkc72 m01 port. Need amount: 10 plates Ca, 10 plates AN Thanks. May 2, 2025 at 10:01 PM, VK (mcs) : Materials released May 2, 2025 at 10:52 PM, Nagy Tamás FA : Can we start the crane? May 2, 2025 at 10:54 PM, 방혁 PM(Bang.Hyuk) FA : It is working from 9:46 May 2, 2025 at 10:54 PM, 방혁 PM(Bang.Hyuk) FA : Who open the door? May 2, 2025 at 10:59 PM, 김지수PM(Gyuri)_FA : It has been stopped since 22:19, if an error occurs, quick action is needed here because of reel supply May 2, 2025 at 11:01 PM, Farkas Tamàs : . May 2, 2025 at 11:01 PM, Yaroslav SL/C 6 line : @fa AGV5 stopped near 6 line ST11. Please check. Thanks May 2, 2025 at 11:04 PM, 방혁 PM(Bang.Hyuk) FA : There seems to be a misunderstanding, if you have an SCS account you can see the logs. The crane was only stopped for about 3 minutes May 2, 2025 at 11:06 PM, Farkas Tamàs : Okay. You said you're making it inactive. I don't know if you still work there. May 2, 2025 at 11:06 PM, 방혁 PM(Bang.Hyuk) FA : Now it's not that I stopped the crane, it's that the crane stopped due to an error... May 2, 2025 at 11:07 PM, Farkas Tamàs : okay. thank you May 2, 2025 at 11:32 PM, VK (mcs) : @FA Please check Anode reel conveyor E0CNVA52 (7047-7048) Carrier is not moving. May 2, 2025 at 11:38 PM, Dima Kusyk : Please share updated information. Thanks May 2, 2025 at 11:39 PM, 조범희 : 확인 부탁드립니다 May 2, 2025 at 11:41 PM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 197 - Anode: 19 VD Pre STK > VD - Cathode: 08 - Anode: 94 VD Post STK > Stacking - Cathode: 14 - Anode: 154 Reel STK > Notching Anode:125 Cathode: 63 May 2, 2025 at 11:43 PM, Dima Kusyk : Please send CA materials to c71stkc72 m01 port. Need amount: 7 plates Ca Thanks. May 2, 2025 at 11:44 PM, Yaroslav SL/C 6 line : @fa AGV5 stopped near 6 line ST11. Please check. Thanks May 2, 2025 at 11:48 PM, T. Gàbornè C SL NC : @MCS Please check CA reel Storage #51#52, no move reels. Thx May 2, 2025 at 11:50 PM, VK (mcs) : STK is busy, I am monitoring it. May 2, 2025 at 11:54 PM, Nagy Tamás FA : Solved May 2, 2025 at 11:57 PM, T. Gàbornè C SL NC : @FA Please check the CA VD 5-line, 4-line , does not pack the AGV. Thx May 3, 2025 at 12:00 AM May 3, 2025 at 12:00 AM, VK (mcs) : Materials released May 3, 2025 at 12:05 AM, Dima Kusyk : @VK (mcs) Please send AN materials to c71stkc72 m01 port. Need amount: 8 plates AN Thanks! May 3, 2025 at 12:08 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN . We get very slow reels. Thanks May 3, 2025 at 12:12 AM, VK (mcs) : Do you mean cathode right? STK is busy, I am trying to change priorities. Thx May 3, 2025 at 12:14 AM, VK (mcs) : @FA Please check Cathode Reel STK C52 There is no error but the cranes are stopped. May 3, 2025 at 12:16 AM, 방혁 PM(Bang.Hyuk) FA : Solved May 3, 2025 at 12:17 AM, T. Gàbornè C SL NC : @Fa Please check. Is AGV not packed full mgz in the VD, is there a task? Empty VD chamber 4_01 4_03 4_04 4_08 5_05 5_06 5_09 6_08 6_09 May 3, 2025 at 12:19 AM, 방혁 PM(Bang.Hyuk) FA : Can you check LR on VD EQ ?? May 3, 2025 at 12:20 AM, VK (mcs) : Is it anode or cathode? May 3, 2025 at 12:21 AM, QuangPhan : Hello! @FA NC AN 4/1 AGV #1 error. Thanks May 3, 2025 at 12:21 AM, 방혁 PM(Bang.Hyuk) FA : I think CA side May 3, 2025 at 12:25 AM, VK (mcs) : There is no LR May 3, 2025 at 12:27 AM, 방혁 PM(Bang.Hyuk) FA : @FA @Farkas Tamàs Pls Check C51 c01 Load oversize Error May 3, 2025 at 12:28 AM, VK (mcs) : Materials released May 3, 2025 at 12:39 AM, QuangPhan : Hello! @FA NC AN 6/2 AGV #3 error. Thanks May 3, 2025 at 12:43 AM, 김수민 : @VK (mcs) Plz check ca vd 5-1 half chamber May 3, 2025 at 12:44 AM, 김수민 : Plz recheck May 3, 2025 at 12:47 AM, 김수민 : @VK (mcs) Plz check CA VD LR signal 4-1,3,4 / 5-5,6,7,9 / 6-8 May 3, 2025 at 12:48 AM, VK (mcs) : MCS shows its full, Please confirm carrier IDs. Thx May 3, 2025 at 12:49 AM, 김수민 : CA VD 5-1 NOW P01,02(MLC2072, 2229) NO P03,04 May 3, 2025 at 12:50 AM, 김수민 : I sent LR re signal May 3, 2025 at 12:50 AM, VK (mcs) : LR received for all And now some carriers on the way May 3, 2025 at 12:55 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 194 - Anode: 16 VD Pre STK > VD - Cathode: 01 - Anode: 110 VD Post STK > Stacking - Cathode: 01 - Anode: 135 Reel STK > Notching Anode:125 Cathode: 69 May 3, 2025 at 12:58 AM, VK (mcs) : Please apply again LR for empty ports. May 3, 2025 at 1:00 AM, 김수민 : @T. Gàbornè C SL NC Plz check May 3, 2025 at 1:01 AM, 김수민 : Please STOP -> RESTART the chamber. May 3, 2025 at 1:07 AM, T. Gàbornè C SL NC : @Farkas Tamàs Tudnál jelszót adni az RTV-hez? Köszönöm May 3, 2025 at 1:12 AM, T. Gàbornè C SL NC : @MCS Reels are coming very slowly, please priority take a head. It stops production in a short time. Thx May 3, 2025 at 1:14 AM, 방혁 PM(Bang.Hyuk) FA : @Farkas Tamàs @FA PLS check C51 c01 load position Error May 3, 2025 at 1:24 AM, Farkas Tamàs : Felh.: assembly1 jelszó: ASSY_2025! May 3, 2025 at 1:25 AM, T. Gàbornè C SL NC : This message was deleted. May 3, 2025 at 1:28 AM, T. Gàbornè C SL NC : Köszönöm szépen May 3, 2025 at 2:08 AM, Kateryna SSL C : Hello everyone! @mcs/rtd Could you please share available lot for ST? May 3, 2025 at 2:09 AM, VK (mcs) : @FA Please check Cathode reel conveyor CNV C52 RTV Unload start destination unload not busy time over! May 3, 2025 at 2:13 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 197 - Anode: 07 VD Pre STK > VD - Cathode: 02 - Anode: 118 VD Post STK > Stacking - Cathode: 18 - Anode: 130 Reel STK > Notching Anode:128 Cathode: 77 May 3, 2025 at 2:17 AM, T. Gàbornè C SL NC : @MCS Please help me. Could you prioritize CA805 Reel? We have no stock, we stop. Thank you for much. May 3, 2025 at 2:19 AM, VK (mcs) : There was an issue in fork and it has been solved. Material will be delivered soon. CA805? May 3, 2025 at 2:23 AM, T. Gàbornè C SL NC : Yes ,CA. Thank you for information. May 3, 2025 at 2:26 AM, QuangPhan : Hello! @FA Nc An robot #2 error. Thanks May 3, 2025 at 2:31 AM, VK (mcs) : @FA Please check Problem still not solved. Thx May 3, 2025 at 2:33 AM, 방혁 PM(Bang.Hyuk) FA : @Farkas Tamàs May 3, 2025 at 2:34 AM, Farkas Tamàs : Ok May 3, 2025 at 2:34 AM, KIM SEYEON [김세연]_FA : Thank you very much May 3, 2025 at 2:39 AM, T. Gàbornè C SL NC : @MCS You have information,How much Ca 805 Reel is in the warehouse? May 3, 2025 at 2:40 AM, VK (mcs) : According to last LOT update it is 77 May 3, 2025 at 2:41 AM, 방혁 PM(Bang.Hyuk) FA : @FA please make auto for CA NC RTV port May 3, 2025 at 2:41 AM, 방혁 PM(Bang.Hyuk) FA : Thank you! May 3, 2025 at 2:46 AM, Farkas Tamàs : The C1STKC71_P11_MCP electrical cabinet has tripped. The cabinet has been reconnected. There is currently no abnormality. May 3, 2025 at 2:47 AM, 방혁 PM(Bang.Hyuk) FA : Thank you! May 3, 2025 at 2:53 AM, Dariimaa/다리마/Ivancsa : @MCS ST CA C1CNV072_P12 MLA6035 has not moved for a long time. Please check Thank you! May 3, 2025 at 2:57 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16100) Carrier is not moving. May 3, 2025 at 2:58 AM, VK (mcs) : Can you please check what is the actual carrier in the port12? According to MCS MLA6035 is inside the STKA71 ! May 3, 2025 at 3:09 AM, Dariimaa/다리마/Ivancsa : There are different carriers on both sides. MLA2004 MLA2055 May 3, 2025 at 3:12 AM, VK (mcs) : Which one is on port 12? Because there is no info in MCS about these carriers ! May 3, 2025 at 3:13 AM, Dariimaa/다리마/Ivancsa : Port 12 With different carriers on both sides May 3, 2025 at 3:14 AM, VK (mcs) : Can you update CCS? Or can you send it to port 6 It is probably NG case May 3, 2025 at 3:17 AM, VK (mcs) : Or transfer it to a manual port!? May 3, 2025 at 3:22 AM, T. Gàbornè C SL NC : GF NC CA machine stop, no reels. 4/1: 2:30-2:43 4/2: 2:54~ 4/3: 2:35-2:53 5/1; 3:01~ 5/2: 2:55~ 5/3: 3:08~ 6/3: 2:28-2:41 May 3, 2025 at 3:28 AM, Lajos Gábor F.A. : There is 2 different plate id on the 2 side of the plate, we take it out and give tó the production to check it. May 3, 2025 at 3:29 AM, VK (mcs) : Thank you May 3, 2025 at 3:35 AM, Dima Kusyk : @VK (mcs) Please send AN materials to c71stkc72 m01 port. Need amount: 10 plates AN Thanks! May 3, 2025 at 3:37 AM, VK (mcs) : There are still 8 jobs to anode port. carriers are waiting. May 3, 2025 at 3:39 AM, T. Gàbornè C SL NC : @Fa Please check CA #51 reel Storage , no move reels. Thx. May 3, 2025 at 3:39 AM, Dima Kusyk : Please share updated information. Thanks! May 3, 2025 at 3:42 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 197 - Anode: 17 VD Pre STK > VD - Cathode: 01 - Anode: 113 VD Post STK > Stacking - Cathode: 20 - Anode: 146 Reel STK > Notching Anode:110 Cathode: 95 May 3, 2025 at 3:53 AM, QuangPhan : Hello! @MCS Could you please check the ID (LTA0695). We cannot INPUT it back to Warehouse. Thanks. May 3, 2025 at 4:01 AM, T. Gàbornè C SL NC : @FA Please check CA #52 storege, machine stop. Thx May 3, 2025 at 4:13 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 Fork 1 center error May 3, 2025 at 4:24 AM, Dima Kusyk : This message was deleted. May 3, 2025 at 4:25 AM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 5 plates CA Thanks! May 3, 2025 at 4:26 AM, Dima Kusyk : @fa Line 4/STK AGV6 stopped near STK12, please check May 3, 2025 at 4:39 AM, Dima Kusyk : @VK (mcs) @VK (mcs) Please send An materials to c71stkc72 m01 port. Need amount: 2 plates An Thanks! May 3, 2025 at 4:40 AM, Dima Kusyk : @fa STK storage is stopped, please check. Thanks! May 3, 2025 at 4:57 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16100) Carrier is not moving. May 3, 2025 at 4:57 AM, Dima Kusyk : Please share updated information. Thanks! May 3, 2025 at 5:07 AM, T. Gàbornè C SL NC : @Fa Please check CA Robot#1 Mgz detect sensor error Thx May 3, 2025 at 5:09 AM, VK (mcs) : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 192 - Anode: 12 VD Pre STK > VD - Cathode: 00 - Anode: 97 VD Post STK > Stacking - Cathode: 19 - Anode: 160 Reel STK > Notching Anode:109 Cathode: 97 May 3, 2025 at 6:02 AM, Simon Dávid D SL NC : @Dániel Hufnágel @MCS GF NC reel shortage 5/3 05:06~ 5/1 05:36~ May 3, 2025 at 6:02 AM, Cao thi my linh : Hello! @MCS Could you please check the ID (LTA0695). We cannot INPUT it back to Warehouse. Thanks. May 3, 2025 at 6:03 AM, Simon Dávid D SL NC : @MCS hello nincs CA reel megfognak állni a gépek,nézétekrá,köszönöm May 3, 2025 at 6:04 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 3 Time: 06:00~18:00 1. Jeong Woo-jun May 3, 2025 at 6:05 AM, Shahbaz 샤바즈 MCS/RTD : There is “BCR NoRead” alarm. Please check it. May 3, 2025 at 6:06 AM, 안종수 : Please check the NC AN #10 AGV @FA May 3, 2025 at 6:06 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13+1 overtime Overtime (1): Csanálosi Gábor Sick (0):- Holiday (3):Novák Károly, Nagy Gábor , Novák Zoltán Shift change(0): Elektróda:(3) Szabadi Miklós, Kiss Balázs, Oláh András Assembly(5): GF: Zsurbej Zsolt, Nagy Zsolt, Csanálosi Gábor 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 3, 2025 at 6:18 AM, 안종수 : Please recheck. Thank you May 3, 2025 at 6:20 AM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 183 - Anode: 04 VD Pre STK > VD - Cathode: 03 - Anode: 112 VD Post STK > Stacking - Cathode: 17 - Anode: 155 Reel STK > Notching Anode:106 Cathode: 95 May 3, 2025 at 6:22 AM, 안종수 : Thank you so much May 3, 2025 at 6:28 AM, Shahbaz 샤바즈 MCS/RTD : Few reels already delivered to 4/5 line manual ports, 6 line side is normal now and started delivering. Thank you May 3, 2025 at 6:48 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please confirm the load status of VD CA 5-1, 5-5 and 5-6. There half chamber is full according to MCS data. Thank you May 3, 2025 at 6:50 AM, Zsolt F.A. : @mcs Please check gf an nc E0STKA51_M03 port. There is an empty carrier which wont go back to storage. scs sees it as empty but mcs carrier managment says its full. May 3, 2025 at 6:50 AM, Zsolt F.A. : LTA0695 May 3, 2025 at 6:52 AM, Shahbaz 샤바즈 MCS/RTD : There is no Id read from the port yet. Please check the Id read status. Thanks May 3, 2025 at 6:53 AM, Jun(정우준)_SKOH FA : In E0STKC51, please change the PERIORITY of TRANSFER JOB whose SOURCE is 9043 to 90. May 3, 2025 at 7:04 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKA51 “PIO TR off timer over error. Thanks May 3, 2025 at 7:16 AM, Csanálosi Gábor FA : All solved May 3, 2025 at 7:26 AM, KollerCsaba 처버 Чобо : This message was deleted. May 3, 2025 at 7:27 AM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Thanks! May 3, 2025 at 7:32 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created. May 3, 2025 at 7:36 AM, Shahbaz 샤바즈 MCS/RTD : Hello! CA RTV is OOS. Is there work going on? May 3, 2025 at 7:37 AM, Csanálosi Gábor FA : Yes, korean technicians investigating May 3, 2025 at 7:37 AM, Jun(정우준)_SKOH FA : I m checking that problem. May 3, 2025 at 7:37 AM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you. May 3, 2025 at 7:39 AM, KollerCsaba 처버 Чобо : Thank you May 3, 2025 at 7:50 AM, Jun(정우준)_SKOH FA : solved May 3, 2025 at 7:51 AM, Csanálosi Gábor FA : Still need c51 priority on 9043? May 3, 2025 at 7:52 AM, Jun(정우준)_SKOH FA : I think now is okay. but can you keep monitoring RTV?? May 3, 2025 at 7:52 AM, Csanálosi Gábor FA : Sure, we always do that. May 3, 2025 at 7:58 AM, Ivan Kasian Sl 5L 🥹 invited Anastasiia. May 3, 2025 at 8:25 AM, 안종수 : @FA NC AN #10 Error. Please check May 3, 2025 at 8:37 AM, Jun(정우준)_SKOH FA : I checked CA RTV, and it still needs to change priority. May 3, 2025 at 8:43 AM, Jun(정우준)_SKOH FA : @Shahbaz 샤바즈 MCS/RTD Do you know why Full tray is returned to warehouse in E0STKC51<->E0CNVC52? LTC1496, LTC1169 May 3, 2025 at 8:47 AM, Shahbaz 샤바즈 MCS/RTD : Checking May 3, 2025 at 8:53 AM, Shahbaz 샤바즈 MCS/RTD : It seems to be the system redirects when the destination port is OOS. LTC1496 arrived at STKC51_P02 at 07:36 but the destination CNVC52_BP10 was OOS at that time so it was redirected to STKC51_P01. May 3, 2025 at 8:55 AM, Csanálosi Gábor FA : CNVC52_BP10 probably still has communication problem with RTV, can you take that port out? May 3, 2025 at 8:58 AM, Jun(정우준)_SKOH FA : make sense. thank you so much. May 3, 2025 at 8:58 AM, Shahbaz 샤바즈 MCS/RTD : Should I make it OOS to avail any transfer to this port? May 3, 2025 at 8:58 AM, Jun(정우준)_SKOH FA : is there still a problem?? can you share the time?? I want to check playback May 3, 2025 at 8:59 AM, Csanálosi Gábor FA : What if you send an empty plate there, and let it there occupy it? May 3, 2025 at 9:01 AM, Shahbaz 샤바즈 MCS/RTD : I’m not quite sure if that would work. May 3, 2025 at 9:04 AM, Jun(정우준)_SKOH FA : I can make OOS the port by changing dispatching to "N," but I want to make sure that's really the problem. May 3, 2025 at 9:32 AM, Simon Dávid D SL NC : @FA VD CA AGV error ,ellenőríznéd ,köszönöm May 3, 2025 at 9:44 AM, Ivan Chobitko : @mcs/rtd @fa Please check why agv didn’t take empty MGZ? L6-L5 May 3, 2025 at 9:46 AM, Ivan Chobitko : L6 Machine 3 we push UR button around one hour ago We have some problem ? May 3, 2025 at 9:46 AM, Shahbaz 샤바즈 MCS/RTD : Checking May 3, 2025 at 9:48 AM, Ivan Chobitko : it seems like the process has begun. Before this, AGVs were idle May 3, 2025 at 9:50 AM, Shahbaz 샤바즈 MCS/RTD : Ok now AGV are moving and have orders. May 3, 2025 at 10:48 AM, Ivan Chobitko : Anode material supply slowly Problem ? L5-6 May 3, 2025 at 11:09 AM, Simon Dávid D SL NC : @FA hello VD CA megált a 71 -es raktár ,megnéznétek Köszönöm May 3, 2025 at 11:14 AM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 2 plates CA Thanks! May 3, 2025 at 11:16 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created. May 3, 2025 at 11:23 AM, Csanálosi Gábor FA : @Shahbaz 샤바즈 MCS/RTD FYI we took out MLA6081 from copva030, plate NG May 3, 2025 at 11:28 AM, Jun(정우준)_SKOH FA : can you check this again? May 3, 2025 at 11:30 AM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available VD Pre STK > Notching - Cathode: 171 - Anode: 0 VD Pre STK > VD - Cathode: 00 - Anode: 125 VD Post STK > Stacking - Cathode: 13 - Anode: 146 Reel STK > Notching Anode: 80 Cathode: 105 May 3, 2025 at 12:02 PM, Simon Dávid D SL NC : @FA hello NC CA #3 AGV error,ellenőriznéd köszönöm May 3, 2025 at 12:08 PM, Ashley🖤💚✨ : Hello. 9#AGV stopped 9L outside. Please help. Thank you very much. May 3, 2025 at 12:09 PM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA @Chinges Fa May 3, 2025 at 12:11 PM, Ynja/ivancsa FA : it was 1F and solved May 3, 2025 at 12:13 PM, KIM SEYEON [김세연]_FA : thanks May 3, 2025 at 12:37 PM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 3, 2025 at 12:43 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks May 3, 2025 at 1:08 PM, Cao thi my linh : This message was deleted. May 3, 2025 at 1:08 PM, Cao thi my linh : Az 5 AN sorozatban nincs MGZ tálca. kérlek segíts, köszi May 3, 2025 at 1:27 PM, Cao thi my linh : @FA hello NC AN #4AGV error,ellenőriznéd köszönöm May 3, 2025 at 1:42 PM, Cao thi my linh : @FA hello NC AN #2 AGV error,ellenőriznéd köszönöm May 3, 2025 at 1:45 PM, Csanálosi Gábor FA : Has no job, no error May 3, 2025 at 1:50 PM, Toponary Csaba : AGV #1 stopped next to 4/16 Stacking GF May 3, 2025 at 2:27 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot May 3, 2025 at 2:30 PM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. May 3, 2025 at 2:31 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 158 - Anode: 0 VD Pre STK > VD - Cathode: 03 - Anode: 135 VD Post STK > Stacking - Cathode: 11 - Anode: 135 GF NC reel Available lot - CA: 129 - AN: 61 Thank you May 3, 2025 at 2:34 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello VD CA #42 5-6 kemencét AGV-vel pakoltasd át másik kemencébe mert fűtőszálat kell cserelni benne,köszönöm May 3, 2025 at 2:36 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please transfer VD CA 5-6 plates to the stocker manually. Thank you May 3, 2025 at 2:56 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Cathode reel STK C52 Load oversize error! May 3, 2025 at 4:10 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check May 3, 2025 at 4:13 PM, Csanálosi Gábor FA : Done, just forgot to mention it. May 3, 2025 at 4:15 PM, KIM SEYEON [김세연]_FA : super May 3, 2025 at 4:15 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot May 3, 2025 at 4:22 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 149 - Anode: 0 VD Pre STK > VD - Cathode: 01 - Anode: 148 VD Post STK > Stacking - Cathode: 23 - Anode: 128 GF NC reel Available lot - CA: 113 - AN: 65 Thank you May 3, 2025 at 4:36 PM, 이승천 : @FA GF C1CNV072_P08포트 MLA0064 장시간 반송이 안 되고 있습니다. 창고 출고시에는 LOT 6개로 정상이었지만, 도착이후 5개로 잡혀서 반송대상으로 안 되고 있습니다. 포트에서 제거하고, MES정보 확인부탁드립니다. May 3, 2025 at 4:54 PM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 3, 2025 at 5:00 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks May 3, 2025 at 5:08 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir @duzzaman Md (MCS) @Sazzad Bhai SKon @Shahbaz 샤바즈 MCS/RTD @Shakir (MCS) @VK (mcs) please share available lot information in every hour. 🙏 May 3, 2025 at 5:09 PM, 욱 : 자동화에서 수량 업데이트 시 릴창고 수량도 같이 업데이트 가능하실까요? May 3, 2025 at 5:12 PM, KIM SEYEON [김세연]_FA : Photo May 3, 2025 at 5:12 PM, KIM SEYEON [김세연]_FA : 릴도 나옵니다. May 3, 2025 at 5:14 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 146 - Anode: 0 VD Pre STK > VD - Cathode: 01 - Anode: 141 VD Post STK > Stacking - Cathode: 27 - Anode: 122 GF NC reel Available lot - CA: 112 - AN: 74 Thank you May 3, 2025 at 5:16 PM, Csanálosi Gábor FA : @Khaliun/Ivancsa FA @Zaya/ivancsa FA we left agv #6 GF AN VD turned on but in error on purpose, pls leave it that way, need more investigation. May 3, 2025 at 5:57 PM, 방혁 PM(Bang.Hyuk) FA : Sziasztok Night shift FA Technician Schedule Date: 2025.05.03 Time:18:00-06:00 1. Bang hyuk 2. Baek hojong Köszönöm szépen May 3, 2025 at 6:01 PM, Mohammad Amir : @FA Could you please check C1STKC72 _aM01_OP01 there is data Mismatch error . Thank you very much! May 3, 2025 at 6:03 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 146 - Anode: 00 VD Pre STK > VD - Cathode: 02 - Anode: 144 VD Post STK > Stacking - Cathode: 28 - Anode: 129 Thank you very much! May 3, 2025 at 6:03 PM, Mohammad Amir : Dear Sir, I will keep updating the GF available lot every hour. Thank you very much! May 3, 2025 at 6:08 PM, Dima Kusyk : @VK (mcs) Good evening everyone! Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 8 plates Ca' and 8 plates An'. Thanks! May 3, 2025 at 6:08 PM, Mohammad Amir : Good evening, Working on it. May 3, 2025 at 6:09 PM, Mohammad Amir : Available reels for GF:- CA-108 AN-79 Thank you very much! May 3, 2025 at 6:13 PM, Mohammad Amir : @FA Could you please check C1STKC72 _aM01_OP01 there is data Mismatch error . Thank you very much! May 3, 2025 at 6:18 PM, Yon Ko/연커/ : Already solved now everything is normally working thank u. May 3, 2025 at 6:19 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need anymore assistance. Thank you very much! May 3, 2025 at 6:19 PM, Mohammad Amir : Thank you very much! May 3, 2025 at 6:23 PM, Mohammad Amir : Could you please check again there is now light curtain error. Thank you very much! May 3, 2025 at 6:25 PM, Mohammad Amir : @FA @Farkas Tamàs Could you please confirm is there any maintenance going on E0STKC51 , several jobs are pending and CA reels delivery has been stopped cause it shows this STK is under maintenance. Thank you very much ! May 3, 2025 at 6:26 PM, Yon Ko/연커/ : Solved. May 3, 2025 at 6:26 PM, Mohammad Amir : Thank you very much! May 3, 2025 at 6:27 PM, Farkas Tamàs : hello yes there are Technicians. May 3, 2025 at 6:28 PM, Mohammad Amir : Thank you very much for the information! May 3, 2025 at 6:53 PM, T. Gàbornè C SL NC : @Fa Hello Légyszíves nézzétek rá a VD CA oldali mgz raktárra, a kollégák nem tudnak kivenni mgz. Köszönöm szépen May 3, 2025 at 6:55 PM, Mohammad Amir : @Farkas Tamàs Please check,is there maintainance work going on C1STKA72? There is lack of Anode stacking materials. Please check this on priority as it is affecting the production. Thank you very much! May 3, 2025 at 7:01 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 146 - Anode: 00 VD Pre STK > VD - Cathode: 04 - Anode: 134 VD Post STK > Stacking - Cathode: 11 - Anode: 00(As STKA72 is OOS.) GF NC reel Available lot - CA: 92 - AN: 82 Thank you very much! May 3, 2025 at 7:02 PM, Nagy Tamás FA : I'm working on it. May 3, 2025 at 7:02 PM, Mohammad Amir : Thank you very much for the confirmation. May 3, 2025 at 7:30 PM, QuangPhan : Hello! @FA Nc An robot#1 error. Thanks May 3, 2025 at 7:35 PM, Mohammad Amir : @Nagy Tamás FA Please check E0STKA51_M03 therr us STP-1 Down Cylinder Error. Thank you! May 3, 2025 at 7:43 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0CNVC52 _RTV01 is OoS because of this reels delivery has stopped. Thank you very much! May 3, 2025 at 8:09 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 148 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 140 VD Post STK > Stacking - Cathode: 36 - Anode: 129 GF NC reel Available lot - CA: 80 - AN: 103 Thank you very much! May 3, 2025 at 8:10 PM, Mohammad Amir : @Nagy Tamás FA @FA Please check E0STKA52_C01 there is Travel Time over error. Thank you very much! May 3, 2025 at 8:11 PM, Dima Kusyk : @Mohammad Amir Good evening everyone! Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 5 plates Ca' and 5 plates An'. Thanks! May 3, 2025 at 8:11 PM, Mohammad Amir : Good evening, Working on it. Thank you! May 3, 2025 at 8:13 PM, KIM SEYEON [김세연]_FA : Thank you for your hard work May 3, 2025 at 8:14 PM, Mohammad Amir : You are welcome,Sir! May 3, 2025 at 8:14 PM, Lajos Gábor F.A. : Hallo, @MCS. COuld you help me please? C1STKC72_P01, There is a empty waiting MLC2229. Could you give an order to transport? It block the St CV CA empty in and St agv unload. May 3, 2025 at 8:14 PM, Mohammad Amir : Hello, Checking. Thank you very much! May 3, 2025 at 8:17 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 3, 2025 at 8:23 PM, Mohammad Amir : Hello, Could you please check ,there is a job exists in SCS side ,could you please cancel it and afterwards I will give it a command currently command will not get executed because of this issue. Thank you very much! May 3, 2025 at 8:27 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKC71_P15/16 there is Light Curtain error and beacause of this VD jobs are pending. Thank you! May 3, 2025 at 8:31 PM, Lajos Gábor F.A. : I cant cancel because its under work,I cant abort because the plate id is exist,I cant give manual order bacause we dont have permission May 3, 2025 at 8:31 PM, Mohammad Amir : Dear @방혁 PM(Bang.Hyuk) FA Sir, I hope you are well. Could you please cancel the Command for MLC2229 from SCS side. I try to create command for it ,it is not getting executed cause of this issue. Thank you very much! May 3, 2025 at 8:32 PM, 방혁 PM(Bang.Hyuk) FA : Okay May 3, 2025 at 8:32 PM, Mohammad Amir : Thank you very much sir 🙏! May 3, 2025 at 8:34 PM, Mohammad Amir : @Nagy Tamás FA @FA Please check E0STKC51_C02 there is Load Oversize error. It is affecting Reels delivery. Thank you very much! May 3, 2025 at 8:47 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKA71 _P15/16 there is Light Curtain detected error. Thank you very much! May 3, 2025 at 8:55 PM, 방혁 PM(Bang.Hyuk) FA : @FA @제조 C1STKC72_M01에서 MLC2229 배출 부탁드립니다 Please discharge MLC2229 from C1STKC72_M01 May 3, 2025 at 9:05 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 149 - Anode: 02 VD Pre STK > VD - Cathode: 02 - Anode: 130 VD Post STK > Stacking - Cathode: 00(As currently STKC72 is OOS.) - Anode: 134 GF NC reel Available lot - CA: 68 - AN: 104 Thank you very much! May 3, 2025 at 9:06 PM, Mohammad Amir : @FA @Nagy Tamás FA Please confirm is there any maintenance going on at STKC72 ,it shows Open door and because of this there is lack of Cathode Stacking materials. Production is getting affected. Please check this on priority. Thank you very much! May 3, 2025 at 9:12 PM, Lajos Gábor F.A. : Carrier mlc2229 phisically removed , and Data deleted from p01 May 3, 2025 at 9:13 PM, Mohammad Amir : This message was deleted. May 3, 2025 at 9:14 PM, Mohammad Amir : Thank you very much! May 3, 2025 at 9:36 PM, Yaroslav SL/C 6 line : @fa AGV10 stopped near ST 6 line machine 15. Please check. Thanks May 3, 2025 at 9:59 PM, Dima Kusyk : @Mohammad Amir Please send Ca' materials to c71stkc72 m01 port. Need amount: 5 plates Ca'. Thanks! May 3, 2025 at 9:59 PM, Mohammad Amir : Sure, Working on it. Thank you very much! May 3, 2025 at 10:01 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 3, 2025 at 10:07 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 143 - Anode: 00 VD Pre STK > VD - Cathode: 02 - Anode: 143 VD Post STK > Stacking - Cathode: 53 - Anode: 126 GF NC reel Available lot - CA: 71 - AN: 118 Thank you very much! May 3, 2025 at 10:12 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1CNV072_M02 there is Data Mismatch error. Thank you! May 3, 2025 at 10:13 PM, Dima Kusyk : @Mohammad Amir Please send An' materials to c71stkc72 m01 port. Need amount: 10 plates An'. Thanks! May 3, 2025 at 10:16 PM, Mohammad Amir : Sure, Working on it. Thank you very much! May 3, 2025 at 10:21 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 3, 2025 at 10:24 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check now C1CNV072_P01/02 there is light curtain error and it is blocking the job for AGV#2 ,#8. Thank you very much! May 3, 2025 at 10:35 PM, Mohammad Amir : @FA @Lajos Gábor F.A. Please check MLC3048 located at C1CNV072_16_100 ,it is not moving and blocking materials delivery for stacking. Everything is good from MCS RTD side ✅. Please check physically on priority. Thank you very much! May 3, 2025 at 10:38 PM, Nagy Tamás FA : Mlc3048 materials movie May 3, 2025 at 10:39 PM, Mohammad Amir : Thank you very much. Stacking materials delivery has been normalised ✅. I am monitoring. May 3, 2025 at 10:43 PM, QuangPhan : Hello @FA NC AN AGV #4 error. Thanks May 3, 2025 at 10:43 PM, Mohammad Amir : Please check now ,C1CNV072_16_049/51 there is INV-01 Run Time over error and now this issue is blocking stacking materials delivery. Thank you very much! May 3, 2025 at 11:04 PM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKC71 _P15/16 there is Light Curtain detected error. Thank you very much! May 3, 2025 at 11:07 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 147 - Anode: 00 VD Pre STK > VD - Cathode: 00 - Anode: 139 VD Post STK > Stacking - Cathode: 55 - Anode: 125 GF NC reel Available lot - CA: 62 - AN: 107 Thank you very much! May 3, 2025 at 11:21 PM, Dima Kusyk : This message was deleted. May 3, 2025 at 11:21 PM, Dima Kusyk : @Mohammad Amir Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 8 plates Ca' and 8 plates An'. Thanks! May 3, 2025 at 11:22 PM, Mohammad Amir : Sure, Working on it. Thank you very much! May 3, 2025 at 11:29 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 3, 2025 at 11:40 PM, T. Gàbornè C SL NC : @Fa Kérlek gyertek CA 4#3 géphez kitöltési hiba van . Köszönöm szépen May 3, 2025 at 11:45 PM, Yaroslav SL/C 6 line : @fa AGV4 stopped with half out fork near 6 line ST18. Please check. Thanks May 3, 2025 at 11:54 PM, Dima Kusyk : @Mohammad Amir Please send Ca' materials to c71stkc72 m01 port. Need amount: 5 plates Ca'. Thanks! May 3, 2025 at 11:55 PM, Mohammad Amir : Sure, Working on it. Thank you very much! May 3, 2025 at 11:57 PM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 4, 2025 at 12:02 AM May 4, 2025 at 12:02 AM, 방혁 PM(Bang.Hyuk) FA : @Farkas Tamàs @FA pls check GF CA NC RTV May 4, 2025 at 12:05 AM, Nagy Tamás FA : Solved May 4, 2025 at 12:07 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 153 - Anode: 07 VD Pre STK > VD - Cathode: 03 - Anode: 135 VD Post STK > Stacking - Cathode: 37 - Anode: 118 GF NC reel Available lot - CA: 63 - AN: 96 Thank you very much! May 4, 2025 at 12:18 AM, T. Gàbornè C SL NC : @fa Please check CA Robot #3 MCS data report incomplete error Thx May 4, 2025 at 12:32 AM, Mohammad Amir : Could you please check CA NC RTV again ,it is OOS. Thank you very much! May 4, 2025 at 1:19 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 151 - Anode: 08 VD Pre STK > VD - Cathode: 02 - Anode: 136 VD Post STK > Stacking - Cathode: 45 - Anode: 127 GF NC reel Available lot - CA: 54 - AN: 106 Thank you very much! May 4, 2025 at 1:22 AM, Dima Kusyk : @Mohammad Amir Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 8 plates Ca' and 10 plates An'. Thanks! May 4, 2025 at 1:24 AM, Mohammad Amir : Sure, Working on it. Thank you very much! May 4, 2025 at 1:34 AM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 4, 2025 at 2:12 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0CNVA52 _BP06 there is Data Mismatch error. Thank you very much! May 4, 2025 at 2:21 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 150 - Anode: 03 VD Pre STK > VD - Cathode: 02 - Anode: 145 VD Post STK > Stacking - Cathode: 40 - Anode: 118 GF NC reel Available lot - CA: 56 - AN: 95 Thank you very much! May 4, 2025 at 2:21 AM, QuangPhan : Hello! @FA NC AN 5/2 AGV #4 error. Thanks May 4, 2025 at 2:30 AM, Mohammad Amir : @FA Please check E0STKC51_M02~M07 there is light curtain-01 error. Thank you very much! May 4, 2025 at 2:32 AM, Mohammad Amir : @FA C1STKC71_C01/C02 there is Light Curtain error. Thank you very much! May 4, 2025 at 3:01 AM, Yaroslav SL/C 6 line : @fa AGV5 stopped near ST 6 line machine 12. Please check. Thanks May 4, 2025 at 3:09 AM, Dima Kusyk : @Mohammad Amir Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 5 plates Ca' and 10 plates An'. Thanks! May 4, 2025 at 3:09 AM, Mohammad Amir : Sure, Working on it. Thank you very much! May 4, 2025 at 3:18 AM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 4, 2025 at 3:19 AM, Yaroslav SL/C 6 line : @fa AGV5 stopped near ST 6 line machine 7. Please check. Thanks May 4, 2025 at 3:25 AM, Lajos Gábor F.A. : @MCS Could you check E0CNVC52 ,there is carrier LTC1658 on RTV, but it dont have destination May 4, 2025 at 3:25 AM, Mohammad Amir : Checking! May 4, 2025 at 3:35 AM, Mohammad Amir : I have resolved the issue ✅. Reels delivery has been normalised. Thank you very much! May 4, 2025 at 3:35 AM, Lajos Gábor F.A. : Thank you May 4, 2025 at 3:35 AM, Mohammad Amir : You are welcome! May 4, 2025 at 3:37 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 159 - Anode: 16 VD Pre STK > VD - Cathode: 01 - Anode: 146 VD Post STK > Stacking - Cathode: 38 - Anode: 108 GF NC reel Available lot - CA: 49 - AN: 105 Thank you very much! May 4, 2025 at 3:45 AM, T. Gàbornè C SL NC : @FA CA 6-1 VD machine upper right heater NFB off state error. Please send the mgz storege. Thank you for much May 4, 2025 at 4:08 AM, Mohammad Amir : @FA @Lajos Gábor F.A. Please check E0STKA52_C01 there is ready off during Forking error. Thank you! May 4, 2025 at 4:29 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 162 - Anode: 11 VD Pre STK > VD - Cathode: 09 - Anode: 154 VD Post STK > Stacking - Cathode: 38 - Anode: 104 GF NC reel Available lot - CA: 46 - AN: 101 Thank you very much! May 4, 2025 at 4:43 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0CNVC52_RTV01 there is Run time over error and reels delivery has stopped. Thank you very much! May 4, 2025 at 5:01 AM, T. Gàbornè C SL NC : @FA Please check CA side AGV #1, the machine stop. Thx May 4, 2025 at 5:06 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0STKC51_C01 there is Travel driver error. Thank you! May 4, 2025 at 5:11 AM, Lajos Gábor F.A. : @MCS Could you check E0CNVC52 ,there is carrier LTC0816 on RTV, but it dont have destination May 4, 2025 at 5:12 AM, Mohammad Amir : Checking May 4, 2025 at 5:16 AM, Mohammad Amir : I have resolved the issue ✅. Reels delivery has been normalised. Thank you very much! May 4, 2025 at 5:16 AM, Lajos Gábor F.A. : Thank you May 4, 2025 at 5:20 AM, Mohammad Amir : You are welcome! May 4, 2025 at 5:28 AM, Dima Kusyk : @Mohammad Amir Please send Ca' and An' materials to c71stkc72 m01 port. Need amount: 10 plates Ca' and 10 plates An'. Thanks! May 4, 2025 at 5:29 AM, Mohammad Amir : Sure, Working on it. Thank you very much! May 4, 2025 at 5:36 AM, Mohammad Amir : All requested materials have been transferred successfully ✅. Please feel free to reach out to me again if you need any further assistance. Thank you very much! May 4, 2025 at 5:38 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Good morning, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 158 - Anode: 21 VD Pre STK > VD - Cathode: 00 - Anode: 143 VD Post STK > Stacking - Cathode: 30 - Anode: 101 GF NC reel Available lot - CA: 36 - AN: 106 Thank you very much! May 4, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+1 overtime Overtime (1): Csanálosi Gábor Sick (1):Kiss Balázs Holiday (3): Nagy Gábor , Novák Zoltán , Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: , Nagy Zsolt, Csanálosi Gábor, Novák Károly 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Magyar Balázs, Martina Dávid, May 4, 2025 at 6:13 AM, Shahbaz 샤바즈 MCS/RTD : @FA please check C1STKC71_C02 LOAD OVERSIZE ERROR Thanks May 4, 2025 at 6:22 AM, Csanálosi Gábor FA : Done May 4, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 4 Time: 06:00~18:00 1. Jeong Woo-jun May 4, 2025 at 6:27 AM, KollerCsaba 처버 Чобо : @VK (mcs) Good morning Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 6:36 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Transfer command created for requested materials. Thanks. May 4, 2025 at 6:54 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 166 - Anode: 21 VD Pre STK > VD - Cathode: 03 - Anode: 156 VD Post STK > Stacking - Cathode: 15 - Anode: 90 GF NC reel Available lot - CA: 25 - AN: 81 Thank you May 4, 2025 at 7:13 AM, KollerCsaba 처버 Чобо : Good morning, L4 stacking nearby AGV #2 stopped due light curtain error. May 4, 2025 at 8:54 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 165 - Anode: 08 VD Pre STK > VD - Cathode: 01 - Anode: 156 VD Post STK > Stacking - Cathode: 35 - Anode: 107 GF NC reel Available lot - CA: 07 - AN: 63 Thank you May 4, 2025 at 9:03 AM, Ivan Chobitko : @fa AGV 10 ST L6 #11 was driving off route, almost hit a person and crashed on AGV station May 4, 2025 at 9:03 AM, Ivan Chobitko : Check please May 4, 2025 at 9:04 AM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 9:10 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks. May 4, 2025 at 10:05 AM, Simon Dávid D SL NC : @FA hello NC Ca #1 robot C0PVC010 error ,megnéznétek köszönöm May 4, 2025 at 10:33 AM, Zsolt F.A. : @mcs Please check Gf Ca Nc C0PVC010_P13. There are unknown magasin in that port which stops the robot and the agv wont take it. Can you rewrite the data for it? If not we have to take it out. May 4, 2025 at 10:35 AM, Shahbaz 샤바즈 MCS/RTD : Please take it out, rewrite will not work. May 4, 2025 at 10:51 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 160 - Anode: 03 VD Pre STK > VD - Cathode: 03 - Anode: 172 VD Post STK > Stacking - Cathode: 46 - Anode: 95 GF NC reel Available lot - CA: 10 - AN: 76 Thank you May 4, 2025 at 11:08 AM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port. Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 11:15 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks. May 4, 2025 at 12:04 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 158 - Anode: 05 VD Pre STK > VD - Cathode: 01 - Anode: 168 VD Post STK > Stacking - Cathode: 31 - Anode: 93 GF NC reel Available lot - CA: 16 - AN: 66 Thank you May 4, 2025 at 1:20 PM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port.f Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 1:26 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks. May 4, 2025 at 1:31 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 157 - Anode: 04 VD Pre STK > VD - Cathode: 01 - Anode: 177 VD Post STK > Stacking - Cathode: 27 - Anode: 80 GF NC reel Available lot - CA: 16 - AN: 56 Thank you May 4, 2025 at 2:52 PM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port.f Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 2:58 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks. May 4, 2025 at 3:08 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 171 - Anode: 15 VD Pre STK > VD - Cathode: 03 - Anode: 167 VD Post STK > Stacking - Cathode: 13 - Anode: 78 GF NC reel Available lot - CA: 33 - AN: 50 Thank you May 4, 2025 at 4:22 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 173 - Anode: 10 VD Pre STK > VD - Cathode: 03 - Anode: 177 VD Post STK > Stacking - Cathode: 19 - Anode: 75 GF NC reel Available lot - CA: 40 - AN: 64 Thank you May 4, 2025 at 4:37 PM, KollerCsaba 처버 Чобо : @VK (mcs) Please send CA materials to c71stkc72 m01 port.f Need amount: 10 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 4:41 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello VD CA 72 raktárból SoS lenne a MLC1033 tálca manualisan már kikértem.köszönöm May 4, 2025 at 4:42 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for requested materials. Thanks. May 4, 2025 at 4:49 PM, Simon Dávid D SL NC : @FA hello VD CA 72-es raktár error,megnéznétek köszönöm May 4, 2025 at 5:00 PM, Simon Dávid D SL NC : @Shahbaz 샤바즈 MCS/RTD hello VD CA 72 raktárból SoS lenne a MLC3136 tálca manualisan már kikértem.köszönöm May 4, 2025 at 5:07 PM, Shahbaz 샤바즈 MCS/RTD : Just moved to M01. May 4, 2025 at 6:00 PM, VK (mcs) : @FA Good evening Please check Cathode Reel conveyor E0CNVC52 -RTV Does not unload carrier in the port 10 (9018) May 4, 2025 at 6:05 PM, Dima Kusyk : Good evening everyone! Please, share updated information! May 4, 2025 at 6:08 PM, VK (mcs) : @FA Please check Cathode Post-STK C72 Ports 16&17(9016)(9017) It is not a pick-up location error! Port 4 (16037) May 4, 2025 at 6:08 PM, Yon Ko/연커/ : Done May 4, 2025 at 6:14 PM, VK (mcs) : @FA Please check Cathode Reel STK C51 Fork1 load position error! May 4, 2025 at 6:16 PM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 175 - Anode: 11 VD Pre STK > VD - Cathode: 03 - Anode: 150 VD Post STK > Stacking - Cathode: 13 - Anode: 78 GF NC Reel Available LOT - CA: 30 - AN: 69 May 4, 2025 at 6:21 PM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stkc72 m01 port Need amount: 4 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 6:29 PM, VK (mcs) : Materials released May 4, 2025 at 7:07 PM, VK (mcs) : @FA Please check Problem still not solved. Thx May 4, 2025 at 7:08 PM, VK (mcs) : Ports 9 and 10 * May 4, 2025 at 7:30 PM, VK (mcs) : @FA Please check Anode Reel STK A52 There is no error but cranes are stopped. May 4, 2025 at 7:47 PM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 177 - Anode: 08 VD Pre STK > VD - Cathode: 01 - Anode: 159 VD Post STK > Stacking - Cathode: 17 - Anode: 69 GF NC Reel Available LOT - CA: 19 - AN: 84 May 4, 2025 at 8:09 PM, T. Gàbornè C SL NC : @Fa Please check CA Robot #2 MCS data report incomplete error Thx May 4, 2025 at 8:24 PM, T. Gàbornè C SL NC : @Fa Please check CA Robot #2 Robot modemet error Thx May 4, 2025 at 8:32 PM, Dima Kusyk : @VK (mcs) Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 8:40 PM, VK (mcs) : Materials have been released. May 4, 2025 at 8:59 PM, VK (mcs) : @FA Please check Cathode Post-STK C72 MLC1230 doesn't transfer to port 4 (16037) for a while. May 4, 2025 at 9:58 PM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stkc72 m01 port Need amount: 5 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 5 plates AN Thanks! May 4, 2025 at 9:58 PM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 178 - Anode: 12 VD Pre STK > VD - Cathode: 02 - Anode: 146 VD Post STK > Stacking - Cathode: 30 - Anode: 79 GF NC Reel Available LOT - CA: 19 - AN: 61 May 4, 2025 at 10:04 PM, VK (mcs) : Materials have been released. May 4, 2025 at 10:06 PM, T. Gàbornè C SL NC : @Fa Kérnék szépen egy kis segítséget.. Vd CA oldalon szeretnék .a 71-raktárba felküldeni anyagot,de ki áll hibára. Megtudnátok nézni mért? Köszönöm szépen May 4, 2025 at 10:11 PM, T. Gàbornè C SL NC : @FA VD CA #37 5-1 Right heater NFB off state error, please send the mgz Storage. Thank you. May 4, 2025 at 10:35 PM, T. Gàbornè C SL NC : @MCS Please help. VD Ca #71 warehouse was asked for 3 plates because of a check, but we can't send it back. Would you like to see what's the error? Plate ID MCL2216 and MCL2189, MCL1133 Thank you very much May 4, 2025 at 10:37 PM, VK (mcs) : Checking May 4, 2025 at 10:41 PM, VK (mcs) : For all plates, rack in valid reply is: MES error. There are MGZs with different product information May 4, 2025 at 11:04 PM, QuangPhan : Hello! @FA NC AN 4/3 AGV #3 error. Thanks May 4, 2025 at 11:12 PM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 4, 2025 at 11:20 PM, VK (mcs) : Materials have been released. May 5, 2025 at 12:02 AM May 5, 2025 at 12:02 AM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 187 - Anode: 24 VD Pre STK > VD - Cathode: 02 - Anode: 136 VD Post STK > Stacking - Cathode: 07 - Anode: 94 GF NC Reel Available LOT - CA: 22 - AN: 74 May 5, 2025 at 12:28 AM, Dima Kusyk : @VK (mcs) Please send AN materials to c71stka72 m01 port. Need amount: 10 plates Thanks! May 5, 2025 at 12:37 AM, VK (mcs) : Materials released May 5, 2025 at 12:41 AM, Badamaa/Ivancsa FA : Pls check NC CA ROBOT# 3 CV 03 Bcr position error May 5, 2025 at 1:02 AM, T. Gàbornè C SL NC : @FA Please check CA 4#3 no move AGV empty mgz Thank you for much May 5, 2025 at 1:02 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 3 (16038) MLC0060 is not moving. May 5, 2025 at 1:11 AM, VK (mcs) : @FA Please check Cathode Reel Conveyor E0CNVC52 May 5, 2025 at 1:12 AM, 이한웅(삼구) : @FA When can this be confirmed? May 5, 2025 at 1:13 AM, Nagy Tamás FA : I'm working on it. May 5, 2025 at 1:27 AM, QuangPhan : Hello! @FA NC AN Robot #2 error. Thanks May 5, 2025 at 1:29 AM, Dima Kusyk : @VK (mcs) Please share updated information about materials. Thanks! May 5, 2025 at 1:36 AM, T. Gàbornè C SL NC : @Fa Please check CA NC , the AGV no move mgz 4 line . Thx. May 5, 2025 at 1:38 AM, Lajos Gábor F.A. : Agv6 on way to 4_2 p03 May 5, 2025 at 1:39 AM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 176 - Anode: 26 VD Pre STK > VD - Cathode: 02 - Anode: 161 VD Post STK > Stacking - Cathode: 25 - Anode: 74 GF NC Reel Available LOT - CA: 04 - AN: 90 May 5, 2025 at 1:54 AM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stkc72 m01 port Need amount: 5 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 10 plates AN Thanks! May 5, 2025 at 1:55 AM, Lajos Gábor F.A. : @MCS Could you check C0PVA030_P13, empty mgz dont move May 5, 2025 at 1:55 AM, T. Gàbornè C SL NC : @Fa Please come CA NC 4#3 AGV @2 , plate move no correction. Thanks May 5, 2025 at 1:59 AM, VK (mcs) : MCS not received palletized report. May 5, 2025 at 2:03 AM, Lajos Gábor F.A. : Thank you, I send back to 71 wh May 5, 2025 at 2:05 AM, VK (mcs) : We received 6 MGZ IDs just not palletized. If possible manually try it, otherwise send it back to STK. Thx May 5, 2025 at 2:12 AM, VK (mcs) : Materials have been released. May 5, 2025 at 2:14 AM, T. Gàbornè C SL NC : @Fa Please check CA robot #4 Data Mismatch error Thx May 5, 2025 at 2:59 AM, QuangPhan : Hello! @FA @AGV . VD An 4-6 #33 the plates was wrong position . Plz use agv to fix it . thank u May 5, 2025 at 3:10 AM, VK (mcs) : @FA Please check Anode Reel STK A52 Ready off during forking! May 5, 2025 at 3:36 AM, 이한웅(삼구) : Please check VD Ca #6 AGV May 5, 2025 at 4:22 AM, VK (mcs) : GF Next lot quantity available VD Pre STK > Notching - Cathode: 179 - Anode: 18 VD Pre STK > VD - Cathode: 00 - Anode: 164 VD Post STK > Stacking - Cathode: 24 - Anode: 85 GF NC Reel Available LOT - CA: 12 - AN: 92 May 5, 2025 at 4:44 AM, VK (mcs) : @FA Please check Anode reel conveyor A52 E0CNVA52 RTV is not moving. May 5, 2025 at 5:00 AM, Dima Kusyk : @VK (mcs) Please send CA materials to c71stkc72 m01 port Need amount: 4 plates CA Please send AN materials to c71stka72 m01 port. Need amount: 4 plates AN Thanks! May 5, 2025 at 5:06 AM, VK (mcs) : Materials released. May 5, 2025 at 5:24 AM, VK (mcs) : @FA Please check Cathode Reel STK C52 Hoist time over error! May 5, 2025 at 6:10 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(1): Szabadi Miklós Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(4): Pálosi Róbert, Szabadi Miklós, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladat May 5, 2025 at 6:12 AM, Yosyp Tovt : @ Fa Hello. Please Cathode and anode «magazines» are needed on line 4. May 5, 2025 at 6:14 AM, 김지수PM(Gyuri)_FA : Sziasztok Day shift FA Technician Schedule Date: 2025.05.05 Time:06:00 ~ 18:00 1. Bang hyuk 2. Jeong woojun 3. Kim jisoo Köszönöm szépen May 5, 2025 at 6:15 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 177 - Anode: 07 VD Pre STK > VD - Cathode: 02 - Anode: 158 VD Post STK > Stacking - Cathode: 29 - Anode: 106 GF NC reel Available lot - CA: 03 - AN: 85 Thank you May 5, 2025 at 6:36 AM, Yosyp Tovt : @ Fa Hello. Please Cathode and anode «magazines» are needed on line 4. this is very necessary May 5, 2025 at 6:39 AM, Dariimaa/다리마/Ivancsa : Done May 5, 2025 at 8:07 AM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. May 5, 2025 at 8:07 AM, FACS_JaewonShin : ■ 5th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 5, 2025 at 8:08 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 177 - Anode: 14 VD Pre STK > VD - Cathode: 01 - Anode: 155 VD Post STK > Stacking - Cathode: 35 - Anode: 82 GF NC reel Available lot - CA: 0 - AN: 79 Thank you May 5, 2025 at 8:14 AM, 김정희(Jeong hee FA) invited 최명운(CHOI MYOUNGWOON). May 5, 2025 at 8:17 AM, Sazzad Bhai SKon : @FA Good morning. Please check the UNKDUP carrier ID in the following Shelf. C1STKA72 (0105303) C1STKC72 (0200301) C1STKC71 (0204601) May 5, 2025 at 8:41 AM, 김지수PM(Gyuri)_FA : @Badamaa/Ivancsa FA Could you please check the AGV#2 of GF ST? May 5, 2025 at 8:41 AM, 김지수PM(Gyuri)_FA : Cathode May 5, 2025 at 9:01 AM, Debreczeni Ármin : An vd agv #10 stopped May 5, 2025 at 9:02 AM, Dariimaa/다리마/Ivancsa : Solved May 5, 2025 at 9:57 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 173 - Anode: 23 VD Pre STK > VD - Cathode: 01 - Anode: 138 VD Post STK > Stacking - Cathode: 32 - Anode: 98 GF NC reel Available lot - CA: 15 - AN: 83 Thank you May 5, 2025 at 10:07 AM, Sazzad Bhai SKon : @FA @Dariimaa/다리마/Ivancsa It is suspected that shelf 0204601 (C1STKC71) is empty. Please rack out to manual port and restock. May 5, 2025 at 10:20 AM, Dariimaa/다리마/Ivancsa : This is empty. May 5, 2025 at 10:21 AM, Sazzad Bhai SKon : So, there's no plate on that shelf? May 5, 2025 at 10:21 AM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check stack conveyor error May 5, 2025 at 10:21 AM, Dariimaa/다리마/Ivancsa : Yes May 5, 2025 at 10:22 AM, Sazzad Bhai SKon : Thank you, please update the information on SCS. May 5, 2025 at 10:27 AM, KIM SEYEON [김세연]_FA : @dear stack shift leader please come to stack line 4 I want to talk with you. May 5, 2025 at 10:30 AM, Dmytro Poluekto : @Yosyp Tovt please help May 5, 2025 at 10:31 AM, 김진수 : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA AN NC AGV MGZ공급 필요합니다 May 5, 2025 at 10:31 AM, 김진수 : 공 매거진 없어요 May 5, 2025 at 10:32 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 음극 노칭으로 갑시다 May 5, 2025 at 10:33 AM, 정다은 : 3-2호기 마지막 매거진 생산 중으로, 곧 비가동 발생 예상됩니다. 고객 보고 있습니다 May 5, 2025 at 10:39 AM, 정다은 : @KIM SEYEON [김세연]_FA PM님 3-2호기 매거진이 안와서 수동으로 투입 했는데 Pos 에러가 계속 발생합니다. 자동화 쪽애서 확인 부탁드립니다. May 5, 2025 at 10:39 AM, KIM SEYEON [김세연]_FA : 네 May 5, 2025 at 10:47 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CA reel warehouses C51/52 “Port interface error” Thank you May 5, 2025 at 10:54 AM, Csanálosi Gábor FA : Done May 5, 2025 at 11:02 AM, 정다은 : 3-2호기 아직 공매거진 안옵니다 @연해리 @KIM SEYEON [김세연]_FA May 5, 2025 at 11:03 AM, KIM SEYEON [김세연]_FA : 네 확인했습니다 May 5, 2025 at 11:04 AM, 정다은 : 3-3호기도 마찬가지 입니다. 3-2호기에만 계속 반송하고 있습니다 May 5, 2025 at 11:06 AM, Sazzad Bhai SKon : @FA Is the slitter machine anode line 4/5 is working? We have pending jobs for long time May 5, 2025 at 11:07 AM, KIM SEYEON [김세연]_FA : 순차적으로 가고 있습니다.조금 기다려주세요 May 5, 2025 at 11:07 AM, Böröcz Tamás : @MCS It is the assembly GF chat group May 5, 2025 at 11:07 AM, KIM SEYEON [김세연]_FA : @연해리 피엠님 버스트런 동안에는 3라인의 우선순의를 높여주세요 May 5, 2025 at 11:08 AM, KIM SEYEON [김세연]_FA : 3ㅡ3호기 공매거진 투입되었습니다. May 5, 2025 at 11:09 AM, KIM SEYEON [김세연]_FA : 3ㅡ2호기 공매거진투입 필요 @연해리 May 5, 2025 at 11:10 AM, KIM SEYEON [김세연]_FA : 3ㅡ2호기 매거진 투입중입니다 May 5, 2025 at 11:53 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 167 - Anode: 43 VD Pre STK > VD - Cathode: 02 - Anode: 126 VD Post STK > Stacking - Cathode: 28 - Anode: 72 GF NC reel Available lot - CA: 13 - AN: 89 Thank you May 5, 2025 at 12:19 PM, 강기훈 : @Sazzad Bhai SKon @mcs GF ST CA C4STM110_P01 ULD REQ CANCLE PLZ(MLC4085) May 5, 2025 at 1:53 PM, Ngoc zia : Nc an 5.3 An agv1 error May 5, 2025 at 2:31 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 158 - Anode: 49 VD Pre STK > VD - Cathode: 01 - Anode: 104 VD Post STK > Stacking - Cathode: 31 - Anode: 88 GF NC reel Available lot - CA: 0 - AN: 88 Thank you May 5, 2025 at 3:19 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please LR again for VD CA 6-7 half chamber. Thank you May 5, 2025 at 3:20 PM, Dariimaa/다리마/Ivancsa : Done May 5, 2025 at 3:56 PM, Shahbaz 샤바즈 MCS/RTD : @Dariimaa/다리마/Ivancsa The job for VD AN 6-3 was terminated earlier. If the plates MLA2237 and MLA1033 are still there then please return them to the stocker. Thank you. May 5, 2025 at 4:05 PM, Shahbaz 샤바즈 MCS/RTD : Please LR for VD AN 5-1 half chamber as well. May 5, 2025 at 4:09 PM, 인제(Hwang) : @Shahbaz 샤바즈 MCS/RTD Please check the available materials warehouse for Ca VD 3-1~9 & An VD 3-1~9 May 5, 2025 at 4:11 PM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 149 - Anode: 42 VD Pre STK > VD - Cathode: 02 - Anode: 104 VD Post STK > Stacking - Cathode: 39 - Anode: 102 GF NC reel Available lot - CA: 18 - AN: 90 Thank you May 5, 2025 at 4:16 PM, 인제(Hwang) : Can you check only the materials that can be used in 3Line? May 5, 2025 at 4:18 PM, Shahbaz 샤바즈 MCS/RTD : An:3 Ca:3 May 5, 2025 at 4:19 PM, 인제(Hwang) : Please tell me only Ca plate ID May 5, 2025 at 4:21 PM, Shahbaz 샤바즈 MCS/RTD : MLC1230, MLC4085 and MLC2032 May 5, 2025 at 4:21 PM, 인제(Hwang) : Thank you so much! May 5, 2025 at 4:22 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome! May 5, 2025 at 4:47 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check stacking line 4 agv 1 May 5, 2025 at 4:50 PM, Dariimaa/다리마/Ivancsa : Korean technician is working on it. May 5, 2025 at 4:57 PM, 강기훈 : It s done May 5, 2025 at 4:59 PM, KIM SEYEON [김세연]_FA : 매니저님 무슨문제였나요? May 5, 2025 at 5:05 PM, 강기훈 : AGV X축이 조금 벗어났습니다 확인 후 조정했습니다 May 5, 2025 at 6:08 PM, 이한웅(삼구) : @MCS Can you tell me the available plate IDs for Line 3 VD in the NC warehouse? May 5, 2025 at 6:09 PM, Mohammad Amir : Checking May 5, 2025 at 6:10 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 5, 2025 at 6:11 PM, Mohammad Amir : CA-MLC1230,MLC4086,MLC2032. AN-0 Thank you very much! May 5, 2025 at 6:12 PM, 이한웅(삼구) : Thank you! May 5, 2025 at 6:13 PM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC72 _C02 there is Load Oversize error. Cathode stacking materials delivery has been stopped, please check this issue on priority. Thank you very much! May 5, 2025 at 6:13 PM, Mohammad Amir : You are welcome! May 5, 2025 at 6:15 PM, Mohammad Amir : @FA @Vékony Ferenc Please check E0CNVA52_RTV01 there is lift load dest port auto off alarm ,it has stopped the reels delivery. Please check this issue on priority as well. Thank you very much! May 5, 2025 at 6:16 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0CNVC52_M06 there is Stp-01 Up Error. Thank you very much! May 5, 2025 at 6:24 PM, Mohammad Amir : Good evening Everyone, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 155 - Anode: 42 VD Pre STK > VD - Cathode: 01 - Anode: 96 VD Post STK > Stacking - Cathode: 01 - Anode: 73 GF NC reel Available lot - CA: 18 - AN: 90 Thank you May 5, 2025 at 6:30 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check this issue on priority as stacking materials delivery has been stopped. Production is getting affected. Thank you very much! May 5, 2025 at 6:31 PM, Mohammad Amir : @Manufacturing @Karina Please check and remove 1+3 carriers from C1CNV072_M01 ,it will increase the stacking materials delivery speed. Thank you very much! May 5, 2025 at 6:35 PM, Mohammad Amir : @FA @Nagy Tibor Please check C1CNV072_16_131 there is Data mismatch error and this issue is blocking stacking materials delivery. Please check this issue on priority. Thank you very much! May 5, 2025 at 7:06 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.05 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo lee minjae Köszönöm szépen May 5, 2025 at 7:47 PM, Nguyên : AN GF NC Reel is slow. Please check for me. May 5, 2025 at 7:47 PM, Mohammad Amir : Checking May 5, 2025 at 7:51 PM, Mohammad Amir : This message was deleted. May 5, 2025 at 7:54 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA51_C01/C02 it is in inactive state now without error. Thank you very much! May 5, 2025 at 7:55 PM, Mohammad Amir : It has stopped the reels delivery. Thank you very much! May 5, 2025 at 7:56 PM, Mohammad Amir : @FA @Vékony Ferenc Please check E0STKC51_C01 there is MCP AP error and it has blocked the CA reels delivery. Please check out the issue on priority as it is affecting production. Thank you very much! May 5, 2025 at 8:05 PM, Mohammad Amir : Issue has been resolved ✅. Anode reels delivery has been normalized. Thank you very much! May 5, 2025 at 8:52 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 161 - Anode: 49 VD Pre STK > VD - Cathode: 03 - Anode: 94 VD Post STK > Stacking - Cathode: 22 - Anode: 103 GF NC reel Available lot - CA: 00 - AN: 71 Thank you May 5, 2025 at 8:54 PM, 이한웅(삼구) : @FA Please send the magazine from VD CA 3-5 (#23) chamber to the ST warehouse using the AGV. Thank you. May 5, 2025 at 9:09 PM, Mohammad Amir : @FA Please check E0CNVA52_07_046 there Is data loss error and RTV is OOS ,Andoe reels delivery has stopped. Thank you very much! May 5, 2025 at 9:25 PM, 이한웅(삼구) : @이주봉PM LEE JUBONG(FA) NC Ca 릴창고, RTV 정상 작동중인가요? May 5, 2025 at 9:25 PM, 이주봉PM LEE JUBONG(FA) : 조치중입니다 May 5, 2025 at 9:43 PM, Nguyên : VD AN GF AGV#3 Error May 5, 2025 at 9:46 PM, 김희용 : @Stacking 삼구 담당자분 4,6Line Load Request 누르는것이 지연되고 있습니다 누를수있도록 부탁드립니다 (4라인 1개, 6라인 2개 안눌려있느상황) May 5, 2025 at 9:56 PM, Mohammad Amir : @Nagy Tibor Please check E0STKC51_C01 there is Loads Oversize error. Thank you! May 5, 2025 at 10:26 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir now abnormal stop at reel storage Crane happens. please share the information when there are many jobs but Crane don't move without alarm or oos. May 5, 2025 at 10:26 PM, Mohammad Amir : Sure Sir, I am monitoring and keep reporting. Thank you very much! May 5, 2025 at 10:27 PM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) @이민재 are today's contact point. May 5, 2025 at 10:27 PM, KIM SEYEON [김세연]_FA : Thank you very much May 5, 2025 at 10:27 PM, Mohammad Amir : You are welcome Sir! May 5, 2025 at 10:28 PM, 박태영 : 스태킹 load / unload 빠르게 눌러주세요 May 5, 2025 at 10:32 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 166 - Anode: 45 VD Pre STK > VD - Cathode: 00 - Anode: 96 VD Post STK > Stacking - Cathode: 14 - Anode: 106 GF NC reel Available lot - CA: 10 - AN: 83 Thank you May 5, 2025 at 10:39 PM, Nguyên : Line 5 AN NC GF In line - out line MGZ Error come check for my May 5, 2025 at 10:45 PM, Mohammad Amir : @FA @Vékony Ferenc Please check E0CNVA52_RTV01 there is Unload start dear unload not busy time over alarm ,it has stopped the reels delivery. Please check this issue on priority as well. Thank you very much! May 5, 2025 at 10:51 PM, Mohammad Amir : @FA @Nagy Tibor Please check this issue AN reels delivery has been stopped. Production is getting affected. Thank you very much! May 5, 2025 at 11:08 PM, F.Péter A SL L10 invited Anita Mirosnicsenko. May 5, 2025 at 11:14 PM, Mohammad Amir : @Manufacturing Please press LR for C6VDC020_P02/01 as there is half chamber situation. Thank you very much! May 5, 2025 at 11:15 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKC52_C01 there is Port interface Error. Thank you very much! May 5, 2025 at 11:28 PM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKC71_P20 there is data Mismatch error and it is blocking transfer to VD CA 4-1. Thank you very much! May 5, 2025 at 11:36 PM, Zulaa/졸라/Ivancsa FA : Solved May 5, 2025 at 11:36 PM, Mohammad Amir : Thank you very much! May 5, 2025 at 11:37 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA coudm you please press LR for this. Thank you very much! May 5, 2025 at 11:51 PM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKA72_P21 there is Auto step time over error and it is blocking materials recovery. Thank you very much! May 5, 2025 at 11:58 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 164 - Anode: 52 VD Pre STK > VD - Cathode: 01 - Anode: 93 VD Post STK > Stacking - Cathode: 30 - Anode: 106 GF NC reel Available lot - CA: 05 - AN: 82 Thank you May 6, 2025 at 12:04 AM May 6, 2025 at 12:04 AM, Mohammad Amir : @FA @Vékony Ferenc Please check C1CNV072_P36 there is INV-01 Run time Over Error. Thank you very much! May 6, 2025 at 12:17 AM, 이주봉PM LEE JUBONG(FA) : GF stack 6-4 P01 port LR please! May 6, 2025 at 12:20 AM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA Could you please transfer MLA1158 located at C3VDA030_P02 to STK,last job was cancelled that's why it is still there. Please transfer manually to post VD STK. Thank you very much! May 6, 2025 at 12:28 AM, Zulaa/졸라/Ivancsa FA : Chamber is empty.Please Update @ MCS information. May 6, 2025 at 12:28 AM, Mohammad Amir : Thank you very much for the confirmation! May 6, 2025 at 12:29 AM, Mohammad Amir : Information has been updated successfully ✅. Thank you very much! May 6, 2025 at 12:35 AM, 이주봉PM LEE JUBONG(FA) : @Mohammad Amir GF STACKing 3Line L/R, check C3STM120_p01, P02 C3STM150_p01, p02 May 6, 2025 at 12:36 AM, Mohammad Amir : Checking Sir May 6, 2025 at 12:38 AM, 이주봉PM LEE JUBONG(FA) : There are 0 RTD returnable materials. May 6, 2025 at 12:39 AM, Mohammad Amir : There is Active LR sir for both machines. Thank you very much! May 6, 2025 at 12:45 AM, Mohammad Amir : Sir, I don't see any O/P ports of the C1CNV072 has been assigned to Stack line -3 that's this could be reason it shows 0 count. Thank you very much! May 6, 2025 at 1:09 AM, Mohammad Amir : @FA Please check E0STKC52 _C02 there is Load Oversize error. Thank you! May 6, 2025 at 1:16 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 167 - Anode: 56 VD Pre STK > VD - Cathode: 03 - Anode: 95 VD Post STK > Stacking - Cathode: 24 - Anode: 98 GF NC reel Available lot - CA: 01 - AN: 97 Thank you May 6, 2025 at 2:12 AM, 이한웅(삼구) : Please check line 3 Stacking LR @Mohammad Amir May 6, 2025 at 2:14 AM, Mohammad Amir : Checking May 6, 2025 at 2:15 AM, Mohammad Amir : LR received from 3-9,3-12,3-14,3-15 ,3-17 successfully. However reply for all is no lot available. Thank you very much! May 6, 2025 at 2:19 AM, 이한웅(삼구) : Thank you! May 6, 2025 at 2:19 AM, Mohammad Amir : You are welcome! May 6, 2025 at 2:44 AM, 이한웅(삼구) : please check NC An #2 Robot May 6, 2025 at 2:51 AM, Nguyên : NC AN GF robot#2 Error May 6, 2025 at 3:02 AM, 김주연 : @Mohammad Amir plz check if c1cnv072_p22 & 24 is assigned to C3STM Stations. Thanks May 6, 2025 at 3:04 AM, Mohammad Amir : Checking May 6, 2025 at 3:05 AM, Mohammad Amir : Dear Ma'am, I think you mean P23 & P24 , unfortunately these ports are still not assigned to C3STM. Thank you very much! May 6, 2025 at 3:06 AM, 김주연 : You can check it at mcs fixed port or port mapping management. Plz assign it to all of the c3stm stations May 6, 2025 at 3:12 AM, Mohammad Amir : Dear Ma'am, I am not authorized to assign ports to Stacking line. Before executing this task,I need permission from Sir @박태영 to perform this task. Thank you very much for the understanding! May 6, 2025 at 3:13 AM, 박태영 : 제가 볼게요 May 6, 2025 at 3:14 AM, Mohammad Amir : Thank you very much Sir 🙏. May 6, 2025 at 3:57 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 172 - Anode: 66 VD Pre STK > VD - Cathode: 03 - Anode: 87 VD Post STK > Stacking - Cathode: 15 - Anode: 100 GF NC reel Available lot - CA: 26 - AN: 110 Thank you May 6, 2025 at 4:01 AM, 박태영 : solved it May 6, 2025 at 4:01 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0CNVC52_RTV01 there is Run time Over Error and it is stopping CA reels delivery. Please check this on priority. Thank you very much! May 6, 2025 at 4:02 AM, Mohammad Amir : Dear Sir, Thank you very much 🙏. I am grateful for your help. Kind regards Amir May 6, 2025 at 4:04 AM, Mohammad Amir : Dear Ma'am, Issue has been resolved ✅. Now port P23 and P24 has been successfully assigned to Stacking line-3. Currently available materials for Line-3 AN-11 CA-12. Thank you very much! May 6, 2025 at 4:05 AM, Mohammad Amir : @이주봉PM LEE JUBONG(FA) Dear Sir, Now Materials are available for Line-3 stacking as well. Thank you very much! May 6, 2025 at 4:06 AM, Barta Rudi : Hello.The cathode reels are coming very slowly, the lines will stop like this. Could you adjust the priority so we receive the reels faster? @Mohammad Amir May 6, 2025 at 4:06 AM, Mohammad Amir : Checking May 6, 2025 at 4:11 AM, Mohammad Amir : Issue has been resolved ✅. Soon CA reels delivery will start. Thank you very much! May 6, 2025 at 4:12 AM, Barta Rudi : Thank you. May 6, 2025 at 4:12 AM, Mohammad Amir : You are welcome! May 6, 2025 at 4:15 AM, Nguyên : VD GF AN Pls fix plate position on chamber 48(6-3) May 6, 2025 at 4:21 AM, Kertész Dániel : Done May 6, 2025 at 4:21 AM, 이한웅(삼구) : @이주봉PM LEE JUBONG(FA) NC Ca Reel 부족한데 확인 부탁드립니다..... May 6, 2025 at 4:22 AM, 이주봉PM LEE JUBONG(FA) : 지금 열심히 반송중입니다..잠시만요 May 6, 2025 at 4:22 AM, 이한웅(삼구) : 넵 알겠습니다.... May 6, 2025 at 5:08 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 175 - Anode: 70 VD Pre STK > VD - Cathode: 01 - Anode: 79 VD Post STK > Stacking - Cathode: 19 - Anode: 106 GF NC reel Available lot - CA: 27 - AN: 103 Stacking (line-3) AN-3 CA-3 Thank you! May 6, 2025 at 5:41 AM, Andrea Zentay : Hello, We need help. ROBOT#2 [F455][008] Robot Operation MGZ Detect Aensor Error. @FA May 6, 2025 at 6:02 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 10+2/12 Tech, 1Sl Overtime(1): Szabadi Miklós, Novák Károly Holiday(1): Czeilinger Krisztián Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Szabadi Miklós, Rácz Dániel --------------- Assy GF (4): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes, Novák Károly --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása v May 6, 2025 at 6:27 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 181 - Anode: 74 VD Pre STK > VD - Cathode: 03 - Anode: 84 VD Post STK > Stacking - Cathode: 19 - Anode: 106 GF NC reel Available lot - CA: 10 - AN: 97 Stacking (line-5) AN- 113 CA-27 Thank you! May 6, 2025 at 6:38 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca #42(5-6) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 6, 2025 at 7:02 AM, M.Ferenc "B"Nc/Vd SL : @Csanálosi Gábor FA @Böröcz Tamás Vd Ca #42-höz oda tudnátok menni? Megállt egy Agv a gép előtt hibával és a technikusunk nem tud tőle dolgozni. May 6, 2025 at 7:18 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV01 Its stuck either a carrier for a while which is delaying other jobs. Please check it physically. Thank you very much! May 6, 2025 at 7:20 AM, duzzaman Md (MCS) : It moved. Thanks. May 6, 2025 at 7:20 AM, Böröcz Tamás : There are too much order for STKC51 And there are too much empty carrier is waiting for been stocked that's why the RTV cannot unload the empty carrier May 6, 2025 at 7:20 AM, Böröcz Tamás : Anode same May 6, 2025 at 7:20 AM, Böröcz Tamás : Thanks for understanding May 6, 2025 at 8:04 AM, M.Ferenc "B"Nc/Vd SL : Nc katódon meg tudnátok nézni miért nem adagol ki az RTV? May 6, 2025 at 8:05 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 176 - Anode: 74 VD Pre STK > VD - Cathode: 00 - Anode: 68 VD Post STK > Stacking - Cathode: 19 - Anode: 106 GF NC reel Available lot - CA: 25 - AN: 113 Stacking (line-5) AN- 132 CA- 36 Thank you! May 6, 2025 at 8:05 AM, 이도형 (Lee) : @FA Ca E0STKC51 RTV CHECK May 6, 2025 at 8:06 AM, Csanálosi Gábor FA : Tele van az rtv conveyor, a raktárnak sok a feladata, így lassabban tudja üríteni. Ahogy ürül a conveyor, úgy tud az rtv is dolgozni. May 6, 2025 at 8:07 AM, M.Ferenc "B"Nc/Vd SL : Rendben. Köszi. May 6, 2025 at 8:24 AM, Sazzad Bhai SKon : @FA Good morning. Please check the UNKDUP carrier ID in the following Shelf. C1STKA72 (0105303) C1STKC72 (0200301) C1STKC71 (0204601) May 6, 2025 at 8:28 AM, FACS_JaewonShin : ■ 6th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 6, 2025 at 8:32 AM, 이도형 (Lee) : @FA Ca E0STKC51 RTV Silent stop check May 6, 2025 at 8:34 AM, Csanálosi Gábor FA : @Kovács Ágnes @Novák Károly F. A. May 6, 2025 at 8:37 AM, Novák Károly F. A. : Both sides of the RTV conveyor are full. As the warehouse removes the empty reels from the RTV conveyor, the RTV will be able to work. May 6, 2025 at 8:51 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD An #46(6-1) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 6, 2025 at 9:09 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 177 - Anode: 78 VD Pre STK > VD - Cathode: 02 - Anode: 62 VD Post STK > Stacking - Cathode: 19 - Anode: 106 GF NC reel Available lot - CA: 12 - AN: 119 Stacking (line-5) AN- 163 CA- 42 Thank you! May 6, 2025 at 9:10 AM, Ynja/ivancsa FA : Transferred to stk May 6, 2025 at 9:22 AM, duzzaman Md (MCS) : @FA Please check E0STKA52_C02 there is load obersize error. Thank you! May 6, 2025 at 9:23 AM, Csanálosi Gábor FA : On it May 6, 2025 at 9:24 AM, Csanálosi Gábor FA : Done May 6, 2025 at 9:25 AM, duzzaman Md (MCS) : Thank you. Appreciate your prompt response as always. May 6, 2025 at 9:28 AM, Böröcz Tamás : OMW A52 thanks May 6, 2025 at 10:10 AM, Sazzad Bhai SKon : E0CNVC52_RTV01 is not working. Please check, we have lots of orders May 6, 2025 at 10:53 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 176 - Anode: 81 VD Pre STK > VD - Cathode: 03 - Anode: 53 VD Post STK > Stacking - Cathode: 19 - Anode: 106 GF NC reel Available lot - CA: 19 - AN: 128 Stacking (line-5) AN- 186 CA- 71 Thank you! May 6, 2025 at 11:04 AM, Lan Nhi : For An line 6 E0STKC51 is OOS not provide reel for a long time. Plz check for me Thank you May 6, 2025 at 11:06 AM, Sazzad Bhai SKon : Anode or cathode? M06? May 6, 2025 at 11:10 AM, Lan Nhi : Yes. Thanks May 6, 2025 at 11:57 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA hello gabor Can you check NC CA RTV? May 6, 2025 at 11:58 AM, M.Ferenc "B"Nc/Vd SL : It would be urgent because we are running out of reels. May 6, 2025 at 11:59 AM, Csanálosi Gábor FA : Omw May 6, 2025 at 11:59 AM, Böröcz Tamás : Itt vagyok May 6, 2025 at 12:01 PM, 방혁 PM(Bang.Hyuk) FA : It seems like neeed powerful PLC reset, You know May 6, 2025 at 12:17 PM, Csanálosi Gábor FA : Yup tried all, finally worked. (Tray manually to lift) May 6, 2025 at 12:30 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 171 - Anode: 82 VD Pre STK > VD - Cathode: 02 - Anode: 66 VD Post STK > Stacking - Cathode: 14 - Anode: 116 GF NC reel Available lot - CA: 19 - AN: 128 Stacking (line-5) AN- 157 CA- 76 Thank you! May 6, 2025 at 1:32 PM, M.Ferenc "B"Nc/Vd SL : @FA VD CA AGV#4 stopped before #41(5-5) Chamber. May 6, 2025 at 2:03 PM, M.Ferenc "B"Nc/Vd SL : @Shahbaz 샤바즈 MCS/RTD Did we take out this reels? Please help me. Please send me this reels to manual port for Line setting. EA4M073F4202711A LTA0058 EA4M073F4202711B LTA0057 EA4M073F4202911B LTA0049 EA4M073F4202912A LTA0051 EA4M073F4202914A LTA0053 EA4M073F4202913B LTA0052 EA4M073F4203512A LTA1485 EA4M073F4203512B LTA0718 May 6, 2025 at 2:04 PM, 이도형 (Lee) : NC CA AGV #10 확인요청 May 6, 2025 at 2:05 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA could you check it? May 6, 2025 at 2:06 PM, Csanálosi Gábor FA : @Novák Károly F. A. Pls May 6, 2025 at 2:06 PM, 이도형 (Lee) : 완료 May 6, 2025 at 2:07 PM, Dariimaa/다리마/Ivancsa : Solved May 6, 2025 at 2:11 PM, M.Ferenc "B"Nc/Vd SL : @Sazzad Bhai SKon Did we take out this reels? Please help me. Please send me this reels to manual port for Line setting. EA4M073F4202711A LTA0058 EA4M073F4202711B LTA0057 EA4M073F4202911B LTA0049 EA4M073F4202912A LTA0051 EA4M073F4202914A LTA0053 EA4M073F4202913B LTA0052 EA4M073F4203512A LTA1485 EA4M073F4203512B LTA0718 May 6, 2025 at 2:12 PM, M.Ferenc "B"Nc/Vd SL : @Fa Nc An AGV 4 stopped near 5/2 machine. May 6, 2025 at 2:22 PM, 안진모 An Jin Mo : 안녕하세요 RTD 비번 초기화 부탁드립니다. ID : TEMP Please reset the password of RTD ID ID : TEMP May 6, 2025 at 2:26 PM, 김수민 : @duzzaman Md (MCS) Please check this mgz where the 72 warehouse currently on the plate. - MC1301, 1234 May 6, 2025 at 2:29 PM, duzzaman Md (MCS) : Already sent. May 6, 2025 at 2:32 PM, 김수민 : Which port? May 6, 2025 at 2:33 PM, duzzaman Md (MCS) : To different manual ports of STK AN 51 May 6, 2025 at 2:33 PM, 김수민 : Is it being shipped to Manualport? May 6, 2025 at 2:34 PM, duzzaman Md (MCS) : The current location for this is C4STM080_P02 LOTS IN IT ARE - MC1301 MC1234 MC4366 MC1412 MC2231 MC3346 May 6, 2025 at 2:35 PM, duzzaman Md (MCS) : Yes, been shipped to the manual port May 6, 2025 at 2:37 PM, M.Ferenc "B"Nc/Vd SL : Thank you! May 6, 2025 at 2:40 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 181 - Anode: 76 VD Pre STK > VD - Cathode: 00 - Anode: 00 VD Post STK > Stacking - Cathode: 21 - Anode: 119 GF NC reel Available lot - CA: 19 - AN: 128 Stacking (line-5) AN- 129 CA- 92 Thank you! May 6, 2025 at 2:44 PM, Ynja/ivancsa FA : This message was deleted. May 6, 2025 at 2:44 PM, Ynja/ivancsa FA : Please check STKC51’s crane 🏗️ May 6, 2025 at 2:48 PM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca AG #4 stopped near 6/3 machine. Fork servo problem. May 6, 2025 at 2:49 PM, M.Ferenc "B"Nc/Vd SL invited Truong. May 6, 2025 at 3:01 PM, Novák Károly F. A. : Solved. May 6, 2025 at 4:41 PM, 연해리 : @김수민 @안진모 An Jin Mo @M.Ferenc "B"Nc/Vd SL Hello. Assembly members. If you need to change the priority of a transfer order, please tell FA members and do not change it yourself. The reel warehouse is also used by Electrode members, so it will affect the slitter. May 6, 2025 at 5:37 PM, 이도형 (Lee) : NC AN RTV ERROR May 6, 2025 at 6:02 PM, Mohammad Amir : @FA Please check E0CNVA52_07_047 and 48,52 it is OOS and because of this reels delivery has been stopped. Thank you very much! May 6, 2025 at 6:03 PM, 이민재 : Day shift FA Schedule Date: 2025.05.06 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo Lee minjae Köszönöm szépen May 6, 2025 at 6:26 PM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Port interface Error. Thank you! May 6, 2025 at 6:27 PM, Mohammad Amir : This issue still exists . @Mr.Miti (미티) FA please arrange someone to check it as Anode reels delivery has been stopped. Thank you very much! May 6, 2025 at 6:28 PM, 김희용 : solved May 6, 2025 at 6:28 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 6:32 PM, 김희용 : @FA Is someone there ? May 6, 2025 at 6:35 PM, Mohammad Amir : @FA Could you please check C1CNV072_16_244 there is MLC2088 it is not moving and it has blocked the Stacking materials delivery. Thank you very much! May 6, 2025 at 6:35 PM, Yon Ko/연커/ : Solved May 6, 2025 at 6:36 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 6:36 PM, Mohammad Amir : @Yon Ko/연커/ Please could you check this issue as well stacking materials delivery has been stopped. Production is getting affected. Thank you very much! May 6, 2025 at 6:38 PM, Mohammad Amir : Please check again now E0CNVA52_RTV01 has data loss error. Thank you! May 6, 2025 at 6:38 PM, Yon Ko/연커/ : Working on it May 6, 2025 at 6:38 PM, Yon Ko/연커/ : I’ll check May 6, 2025 at 6:39 PM, Mohammad Amir : Thank you very much 🙏 May 6, 2025 at 6:44 PM, 김주연 : @FA GF stacking conveyor 16099 16144 track Plate id duplication !! Plz check!! May 6, 2025 at 6:46 PM, 김주연 : 순환물류 막힙니다. 빨리 조치부탁드맂니다 May 6, 2025 at 6:52 PM, Yon Ko/연커/ : Solved May 6, 2025 at 6:53 PM, Mohammad Amir : Thank you very much 🙏. Stacking materials delivery has been normalized ✅. May 6, 2025 at 6:54 PM, Nguyên : NC AN GF Reel line 6 port error Come check for me May 6, 2025 at 7:08 PM, 동현 : This message was deleted. May 6, 2025 at 7:09 PM, Mohammad Amir : @Yon Ko/연커/ Could you please remove the MLC2088 located at C1CNV072_16_100. Thank you very much! May 6, 2025 at 7:09 PM, 동현 : Thx May 6, 2025 at 7:09 PM, Mohammad Amir : You are welcome! May 6, 2025 at 7:13 PM, Mohammad Amir : @FA Please check this issue on priority as it is blocking Stacking materials delivery. Currently MLC2088 located at -C1CNV072_16_097. Thank you very much! May 6, 2025 at 7:19 PM, Mohammad Amir : @FA Please check E0CNVA52_07_008 /M08 there is Light curtain error. Thank you very much! May 6, 2025 at 7:29 PM, 방혁 PM(Bang.Hyuk) FA : @이민재 May 6, 2025 at 7:40 PM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Laser Sensor Fault and because of this cathode reels delivery has stopped. Please check this issue on priority. Thank you very much! May 6, 2025 at 7:41 PM, Kertész Dániel : A korean colleague workint there May 6, 2025 at 7:41 PM, Kertész Dániel : Working* May 6, 2025 at 7:45 PM, 박태영 : 4라인 스태킹 앞 agv idle 로 대기하고 있는데 어사인 안받는 사유확인 바랍니다 May 6, 2025 at 7:47 PM, 박태영 : 길 막고있어서 4라인 스태킹 쪽에 가질 못합니다 May 6, 2025 at 7:47 PM, 박태영 : 빠르게 확인해주새요 May 6, 2025 at 7:54 PM, 김희용 : 피엠님 1호기 4라인.상단 전용 AGV로 되어있어 반송가능 자재없어 Idle 대기중이고 필요시 밀어내기 진행할거에요 May 6, 2025 at 7:56 PM, 김주연 : 4라인버퍼 포트에 음극자재 나와잇은 것 같은데, 반송불가인건가요? May 6, 2025 at 7:56 PM, 김희용 : ACS보면 스테이션에 마우스대보면 No search lot 뜰거에요 May 6, 2025 at 8:02 PM, 김주연 : @FA 6호기 agv 에러입니다 May 6, 2025 at 8:04 PM, Mohammad Amir : @FA @Yon Ko/연커/ Please check C1CNV072_16_253 and P35 there is Data Loss and Data mismatch error consequently,these errors are blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 6, 2025 at 8:07 PM, 김주연 : 16154 트랙입니다 May 6, 2025 at 8:11 PM, 김주연 : Data lpss at 16154, 16155 May 6, 2025 at 8:13 PM, 김주연 : 16142 track - unk plate May 6, 2025 at 8:13 PM, 김주연 : 16128 data loss May 6, 2025 at 8:15 PM, 김주연 : 이거 우선적으로 조치부탁드립니다. 음극 플레이트 반송이 안됩니다 May 6, 2025 at 8:19 PM, 김주연 : @Mohammad Amir why cosgv001_vc08 is idle? May 6, 2025 at 8:20 PM, Mohammad Amir : Checking Ma'am! May 6, 2025 at 8:23 PM, Mohammad Amir : Dear Ma'am, The job was terminated by operator at 18:49 that's why it is idle ,it had job to go to C1CNV072_P02. Now issue has been resolved and AGVs is moving ✅. Thank you very much! May 6, 2025 at 8:27 PM, KIM SEYEON [김세연]_FA : @Dear shift leader If you need stack station material, please contact RTD/MCS OP like below. @mcs rtd please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate RTD will send you materials. Receive them at the VD storage manual port as usual. please don't touch any kiosk for load material by operators. strictly prohibited. Thanks. Ivancsa FA Seyeon Kim @김세연PM_법인FA_SKon May 6, 2025 at 8:28 PM, Mohammad Amir : Dear Sir, I am working on it! Thank you very much! May 6, 2025 at 8:28 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please send AN stack materials to c1stka72 m01 port Need amount : 8 plate May 6, 2025 at 8:29 PM, Mohammad Amir : Sure Sir, Working on it. May 6, 2025 at 8:36 PM, Mohammad Amir : Dear Sir, I have released the 8 AN materials. However there were only 7 CA materials available to transfer so I could just released 7 CA materials instead of 10. Thank you very much! May 6, 2025 at 8:43 PM, Mohammad Amir : @FA Please check C1STKA72_C02 there is Fork #1 Load Position Error when Active. Thank you very much! May 6, 2025 at 8:49 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA @FA please check this Crane error May 6, 2025 at 8:50 PM, Kertész Dániel : This message was deleted. May 6, 2025 at 8:50 PM, Kertész Dániel : This message was deleted. May 6, 2025 at 8:59 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please send AN stack materials to c1stka72 m01 port Need amount : 6 plate May 6, 2025 at 8:59 PM, Mohammad Amir : Sure Sir, Working on it. Thank you very much! May 6, 2025 at 9:02 PM, Mohammad Amir : Dear Sir, All the requested materials have been released ✅. Please let me know if you need any further assistance. Thank you very much! May 6, 2025 at 9:22 PM, 김주연 : @Mohammad Amir why agv01 is idle? May 6, 2025 at 9:22 PM, Mohammad Amir : Checking Ma'am! May 6, 2025 at 9:23 PM, Mohammad Amir : Ma'am, Could you please tell me area and CA or Anode ? Thank you! May 6, 2025 at 9:25 PM, 김주연 : It's CA May 6, 2025 at 9:25 PM, 김주연 : C0SGV001_VC01 May 6, 2025 at 9:25 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 9:26 PM, 김주연 : Now it ir working May 6, 2025 at 9:27 PM, Mohammad Amir : Yes Ma'am, AGV#1 has successfully executed it's command and delivered the materials to C4STM090_P02 ✅ . Thank you very much! May 6, 2025 at 9:28 PM, 동현 : @Amir(MCS) please send CA stack materials to c1stkc72_m02 Need amount : 1 plate May 6, 2025 at 9:29 PM, Mohammad Amir : Now it got a new job to deliver materials at C1CNV072_P02 and AGV #1 has already departed. Thank you very much! May 6, 2025 at 9:29 PM, Mohammad Amir : Checking ! May 6, 2025 at 9:30 PM, Mohammad Amir : Unfortunately there is no CA Stacking materials available which is transferable. Thank you very much! May 6, 2025 at 9:31 PM, 동현 : @KIM SEYEON [김세연]_FA PM님 양극 자재가 부족합니다 May 6, 2025 at 9:32 PM, 김희용 : @제조 GF ST 4,5,6 라인 양극 반송가능자재가 없습니다. 참고부탁드립니다 May 6, 2025 at 9:33 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot May 6, 2025 at 9:33 PM, Mohammad Amir : Sure Sir! Thank you very much! May 6, 2025 at 9:36 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 187 - Anode: 83 VD Pre STK > VD - Cathode: 00 - Anode: 70 VD Post STK > Stacking - Cathode: 00 - Anode: 110 GF NC reel Available lot - CA: 84 - AN: 191 Thank you! May 6, 2025 at 9:41 PM, Mohammad Amir : @FA @Yon Ko/연커/ Please check MLC3157 located at C1CNV072_16_100 it is not moving and causing blockage to stacking materials delivery. Everything is good from MCS RTD side ✅. Please check physically urgently as there is lack of stacking materials to line-5&6. Thank you very much! May 6, 2025 at 9:43 PM, 김주연 : 16100 track May 6, 2025 at 9:49 PM, Yon Ko/연커/ : Already solved May 6, 2025 at 9:52 PM, Mohammad Amir : Thank you very much! May 6, 2025 at 10:13 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot May 6, 2025 at 10:14 PM, Mohammad Amir : Sure Sir, Checking. Thank you very much! May 6, 2025 at 10:15 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 188 - Anode: 88 VD Pre STK > VD - Cathode: 01 - Anode: 64 VD Post STK > Stacking - Cathode: 09 - Anode: 110 GF NC reel Available lot - CA: 80 - AN: 177 Thank you! May 6, 2025 at 10:48 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 6, 2025 at 10:50 PM, 이주봉PM LEE JUBONG(FA) : C1STKC72 C1STKA72 Anode 7EA. M01 Cathode 7EA M01 May 6, 2025 at 10:51 PM, 이주봉PM LEE JUBONG(FA) : @Mohammad Amir manual job please May 6, 2025 at 10:51 PM, Mohammad Amir : Sir, Should I release 7 CA & 7 AN materials? Thank you very much! May 6, 2025 at 10:56 PM, Mohammad Amir : Sir, All the requested materials have been released ✅. Please feel free to contact me again if you need any further assistance. Thank you very much! May 6, 2025 at 11:03 PM, 이주봉PM LEE JUBONG(FA) : Please create 7 more additional manual returns May 6, 2025 at 11:03 PM, Mohammad Amir : Sure Sir, Should I release both CA and AN? Thank you! May 6, 2025 at 11:10 PM, Mohammad Amir : Sir, All the requested materials have been released ✅. Please feel free to contact me again if you need any further assistance. Thank you very much! May 6, 2025 at 11:28 PM, Nguyên : NC AN GF Reel Very slow to come check for me May 6, 2025 at 11:29 PM, Mohammad Amir : Checking May 6, 2025 at 11:32 PM, Mohammad Amir : Actually recovery way of E0CNVA52 is filled with empty reels and RTV is also waiting to deliver empty reels and as currently there is no place on CNVA52 so RTV is waiting with empty reels and not moving,resulting delay in Anode reels delivery. There are already 4 Anode reels waiting on the CNV. I have increased priority in way that empty reels will go to STK and there will be space on the CNV and RTV can start delivering Reels. ✅ Thank you very much! May 6, 2025 at 11:33 PM, Mohammad Amir : I am managing so that reels delivery can continue again. Thank you very much! May 6, 2025 at 11:38 PM, Mohammad Amir : Reels delivery has continued ✅. I am managing soon you will keep receiving the reels. Thank you very much! May 6, 2025 at 11:51 PM, 하연철(HA YEONCHEOL)/ : @mcs Can you check if there are any products from Line 2 in the VD warehouse? May 6, 2025 at 11:51 PM, Mohammad Amir : Sure Sir, Checking May 6, 2025 at 11:52 PM, Mohammad Amir : Sir, For AN-00 For CA-3(MLC3074,MLC3009,MLC2202). Thank you very much! May 6, 2025 at 11:57 PM, Nguyên : VD GF AN 43 (5-7) I need AGV to take the goods out. Please help me. May 6, 2025 at 11:58 PM, Mohammad Amir : @FA @Yon Ko/연커/ Please check this issue. Thank you very much! May 7, 2025 at 12:02 AM May 7, 2025 at 12:02 AM, Nguyên : machine broken into heat I need to get the goods out easy to repair May 7, 2025 at 12:08 AM, Yon Ko/연커/ : Im on my way. May 7, 2025 at 12:19 AM, Yon Ko/연커/ : @Mr.Miti (미티) FA NC CA Robot2 Check pls. May 7, 2025 at 12:20 AM, Mr.Miti (미티) FA : Köszönöm @Kertész Dániel! May 7, 2025 at 12:31 AM, Kertész Dániel : @Mohammad Amir Hello! In the MCS the GF AN VD looks red, but there are no alarms at all. Could you reset it in the MCS please? Thank you! May 7, 2025 at 12:31 AM, Mohammad Amir : Checking May 7, 2025 at 12:33 AM, Mohammad Amir : Issue has been resolved ✅. Feel free to contact me again if you need any assistance. Thank you very much! May 7, 2025 at 12:33 AM, Kertész Dániel : Thank you so much! May 7, 2025 at 12:35 AM, Mohammad Amir : You are welcome! May 7, 2025 at 12:57 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 203 - Anode: 86 VD Pre STK > VD - Cathode: 01 - Anode: 82 VD Post STK > Stacking - Cathode: 04 - Anode: 80 GF NC reel Available lot - CA: 70 - AN: 215 Thank you! May 7, 2025 at 1:32 AM, Mohammad Amir : @Kertész Dániel Please check E0STKA52_C01 there is Load Oversize error. Thank you! May 7, 2025 at 1:38 AM, Barta Rudi : Hello.At the AGV 2 cathode 4/3 machine, it stopped because it incorrectly picked up the full magazines. @FA May 7, 2025 at 1:51 AM, Mohammad Amir : @FA Please check E0STKC51_M02 there is Data Loss error. Thank you! May 7, 2025 at 1:57 AM, Elena Dzhul : @FA AGV5 stopped near ST/4L machine 5, please check. Thanks! May 7, 2025 at 2:40 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 203 - Anode: 86 VD Pre STK > VD - Cathode: 01 - Anode: 71 VD Post STK > Stacking - Cathode: 00 - Anode: 87 GF NC reel Available lot - CA: 34 - AN: 233 Thank you! May 7, 2025 at 2:41 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check E0CNVC52_RTV01 there is Laser sensor fault and reels delivery has stopped. Thank you very much! May 7, 2025 at 2:43 AM, Kertész Dániel : Done May 7, 2025 at 2:44 AM, Mohammad Amir : Thank you very much! May 7, 2025 at 2:46 AM, Nguyên : NC GF AN Pls check for AGV AN side job. AGV working slow. Some mc stop bcs dont have empty mgz. I checked and warehouse we still have empty mgz. May 7, 2025 at 2:47 AM, Mohammad Amir : Checking May 7, 2025 at 2:54 AM, Mohammad Amir : No abnormalities found ✅. Empty magazine are getting transferred as soon as it reaches the O/P ports of the Gantry. Currently AGV#8 on the way for 5-3 NC AN. One job for 4-3 and AGV#10 one the way for 5-1 NC AN . One more empty magazine also available on the O/P ports so jib will be created for this one as well. I am monitoring . Thank you very much! May 7, 2025 at 2:56 AM, Mohammad Amir : Additionally AGV#10 on the way to 4-3 and for 5-3 Also empty magazine transfer on the way. Thank you! May 7, 2025 at 3:17 AM, Mohammad Amir : This message was deleted. May 7, 2025 at 3:17 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 7, 2025 at 3:21 AM, P.Bence A SSL : @Mohammad Amir please send CA stack materials to c1stkc72 m01 port. Need amount : 4 plate May 7, 2025 at 3:27 AM, Mohammad Amir : Checking. May 7, 2025 at 3:28 AM, Mohammad Amir : Unfortunately there is no Cathode Stacking materials available which is transferable. Thank you very much! May 7, 2025 at 3:30 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 199 - Anode: 93 VD Pre STK > VD - Cathode: 02 - Anode: 81 VD Post STK > Stacking - Cathode: 00 - Anode: 77 GF NC reel Available lot - CA: 25 - AN: 240 Thank you! May 7, 2025 at 3:57 AM, Mohammad Amir : @Kertész Dániel Please check E0CNVA52_M06 there is Stp-01 Up Error. Thank you very much! May 7, 2025 at 4:00 AM, Mohammad Amir : @Kertész Dániel @FA Please also check C1STKA71_C01 there is Fork#1 Load position error when active. Thank you very much! May 7, 2025 at 4:00 AM, Nagy Tibor : done May 7, 2025 at 4:00 AM, Mohammad Amir : Thank you very much! May 7, 2025 at 4:13 AM, Mohammad Amir : @Nagy Tibor Please check C1STKC72_C02 there is Travel First Movement Error and because of this several VD AGVs are waiting. Thank you very much! May 7, 2025 at 4:24 AM, Barta Rudi : VD CA AGV 7 stopped check please, thank you May 7, 2025 at 4:28 AM, Nguyên : AGV not bring MGZ to 5/2 AN NC GF.please check for me May 7, 2025 at 4:28 AM, Mohammad Amir : Checking May 7, 2025 at 4:31 AM, Mohammad Amir : Issue has been resolved ✅. AGV#6 is on the way with empty magazine. Thank you very much! May 7, 2025 at 4:56 AM, Mohammad Amir : @FA @Yon Ko/연커/ Please check C1CNV072_16_156 and P35 there is Data Loss and Data mismatch error consequently,these errors are blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 7, 2025 at 5:14 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKA52_C01 there is travel driver error. Thank you! May 7, 2025 at 5:19 AM, P.Bence A SSL : Check again please May 7, 2025 at 5:22 AM, Mohammad Amir : Checking May 7, 2025 at 5:27 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 198 - Anode: 89 VD Pre STK > VD - Cathode: 01 - Anode: 64 VD Post STK > Stacking - Cathode: 03 - Anode: 90 GF NC reel Available lot - CA: 41 - AN: 241 Thank you! May 7, 2025 at 6:01 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kovács Szabolcs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 7, 2025 at 6:53 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 7 Time: 06:00~18:00 1. Jeong Woo-jun May 7, 2025 at 6:56 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 199 - Anode: 90 VD Pre STK > VD - Cathode: 00 - Anode: 82 VD Post STK > Stacking - Cathode: 0 - Anode: 72 GF NC reel Available lot - CA: 38 - AN: 259 Thank you May 7, 2025 at 7:02 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing Please LR again for VD AN 5-1 half chamber. Thank you May 7, 2025 at 7:32 AM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA Please LR again for VD AN 6-6 half chamber. Thank you. May 7, 2025 at 7:33 AM, Zaya/ivancsa FA : done May 7, 2025 at 8:01 AM, FACS_JaewonShin : ■ 7th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 7 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi Daily(12:00 - 18:00) : 2 people - PLC Control 2 Jin taehyeong Jin jaejeong May 7, 2025 at 9:16 AM, Sazzad Bhai SKon : There is a duplicate plate inside VD CA 6-3 line P02. Can you please confirm the plate MLC3125 there? May 7, 2025 at 9:20 AM, Sazzad Bhai SKon : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 188 - Anode: 90 VD Pre STK > VD - Cathode: 2 - Anode: 00 VD Post STK > Stacking - Cathode: 0 - Anode: 63 Thank you May 7, 2025 at 9:28 AM, Sazzad Bhai SKon : @FA Good morning. Please check the UNKDUP carrier ID in the following Shelf. MLC3125: C1STKC72 (0100101) MLC2096: C1STKC71 (0204601) May 7, 2025 at 9:29 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check fa technicians May 7, 2025 at 10:23 AM, Zsolt F.A. : @mcs We had to take out MLC3018 from production because the plate handle was broken. The plate is full with empty magasins. MC2472; MC6167;MC4135;MC1373;MC1252;MC3380 May 7, 2025 at 10:36 AM, Sazzad Bhai SKon : After repair, please restock from the manual port. May 7, 2025 at 10:58 AM, Zsolt F.A. : We checked MLC3125 and there was MLC3032 number on the plate. May 7, 2025 at 10:59 AM, Sazzad Bhai SKon : Thank you for update. That Means the plate is not duplicated. Please restock:) May 7, 2025 at 11:02 AM, Zsolt F.A. : We took it out from the STK72 and gave it to stacking operators because we coudn't load it manually back. MCS Buzzer error occurd when we tried. May 7, 2025 at 11:02 AM, Zsolt F.A. : We are checking the other one right now. May 7, 2025 at 11:10 AM, Zsolt F.A. : MLC2096 is not in STK71 May 7, 2025 at 11:13 AM, Sazzad Bhai SKon : Please check the Shelf May 7, 2025 at 11:15 AM, Sazzad Bhai SKon : MLC3032 is VD material. We need to try it from pre VD manual port please. May 7, 2025 at 11:16 AM, Sazzad Bhai SKon : C1STKC71 manual port May 7, 2025 at 11:18 AM, Zsolt F.A. : We already did. Its not there. May 7, 2025 at 11:19 AM, Sazzad Bhai SKon : MLC2096: pre VD STK C1STKC71 (0204601) May 7, 2025 at 11:19 AM, Péti Gábor invited Farkas Bence. May 7, 2025 at 11:20 AM, Sazzad Bhai SKon : UNKDUP-MLC2096-250430004645B May 7, 2025 at 11:21 AM, Zsolt F.A. : The shelf is empty. May 7, 2025 at 11:21 AM, Zsolt F.A. : Nothing there. May 7, 2025 at 11:22 AM, Sazzad Bhai SKon : I understand, okay thanks for confirming. Please update the information on SCS. May 7, 2025 at 11:23 AM, Zsolt F.A. : We checked in scs MLC2096 is at 0105102 shelf. May 7, 2025 at 11:24 AM, Sazzad Bhai SKon : pre VD STK C1STKC71 (0204601) Is there any plate there? On scs a plate is showing May 7, 2025 at 11:26 AM, Zsolt F.A. : The stacker just put there MLC2145 May 7, 2025 at 11:27 AM, Sazzad Bhai SKon : Thank you for your support May 7, 2025 at 11:34 AM, Nguyen Huy : Hello, could you please update this? Thank you May 7, 2025 at 11:36 AM, Jun(정우준)_SKOH FA : 금일 GF ST 운영 담당자 누구신가요?? May 7, 2025 at 11:36 AM, 조범희 : 네 May 7, 2025 at 11:42 AM, Shahbaz 샤바즈 MCS/RTD : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 0 - Anode: 85 VD Pre STK > VD - Cathode: 00 - Anode: 85 VD Post STK > Stacking - Cathode: 06 - Anode: 59 GF NC reel Available lot - CA: 86 - AN: 1291 Thank you May 7, 2025 at 12:06 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please send back VD AN 5-7, 5-8 and 6-2 remaining plates to the stocker. The Carrier ID was missing when there was UR for these plates. Thank you May 7, 2025 at 12:30 PM, Nguyen Huy : @FA AGV #7 error near chamber #46 VD CA, pls check May 7, 2025 at 12:30 PM, Yon Ko/연커/ : On my way May 7, 2025 at 12:31 PM, Zaya/ivancsa FA : Done May 7, 2025 at 12:31 PM, Yon Ko/연커/ : done May 7, 2025 at 12:32 PM, Nguyen Huy : Thank you May 7, 2025 at 12:35 PM, Farkas Bence : I need FA help on L6. #9 agv took the plate Ca plate. May 7, 2025 at 12:54 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot May 7, 2025 at 12:59 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 87 • Cathode: 194 VD Pre STK > VD • Anode: 77 • Cathode: 03 VD Post STK > Stacking • Anode: 59 • Cathode: 18 GF NC reel Available lot • AN: 283 • CA: 33 Thank you May 7, 2025 at 1:31 PM, KollerCsaba 처버 Чобо : @FA AGV #1 on L4 stacking idle in error. Please check May 7, 2025 at 1:35 PM, Zaya/ivancsa FA : solved May 7, 2025 at 2:02 PM, Péti Gábor invited Tetiana SL/D. May 7, 2025 at 2:09 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Anode reel stocker crane, they are not transferring carriers. Thank you May 7, 2025 at 2:57 PM, Ivan Kasian Sl 5L 🥹 : @fa check please agv#3 near 5-5 chamber cathode May 7, 2025 at 2:59 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 79 • Cathode: 196 VD Pre STK > VD • Anode: 83 • Cathode: 00 VD Post STK > Stacking • Anode: 51 • Cathode: 02 GF NC reel Available lot • AN: 285 • CA: 13 Thank you May 7, 2025 at 3:10 PM, 최정한.KOVA : VD. AN 4,5,6라인 서브배럴 가득찬 호기들 비워주세요 May 7, 2025 at 3:31 PM, 김진수 : 해당부분에 대해서 작업자 교육 부탁드립니다 May 7, 2025 at 3:35 PM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA Please return the remaining plates of VD AN 4-1,4-2. Their Carrier ID was missing when there was a UR. Thank you May 7, 2025 at 3:41 PM, Zaya/ivancsa FA : Should i return to STK 4-3,5-6? May 7, 2025 at 3:43 PM, Shahbaz 샤바즈 MCS/RTD : 4-3 and 5-6 as well. Thanks May 7, 2025 at 3:47 PM, 최정한.KOVA : 음극 4-8 알람 정지. 건조전 매거진 AGV 수동반송해주세요. May 7, 2025 at 3:47 PM, Shahbaz 샤바즈 MCS/RTD : @FA The Plate IDs are missing when there is an unload request from the VD AN chamber, and as a result, jobs are only created for an odd number of plates, leading to the need for manual transfer. Please check. Recently, IDs were missing from VD AN 4-1, 4-2, 4-3, and 5-6. Thank you. May 7, 2025 at 3:57 PM, Sazzad Bhai SKon : @FA Did you unload the plates manually? Please confirm us this, we will analyze the reason May 7, 2025 at 4:06 PM, Zaya/ivancsa FA : The plates wasn’t manually unloaded May 7, 2025 at 4:07 PM, Sazzad Bhai SKon : Thank you for the confirmation, this is process machine error. We will inform responsible manager May 7, 2025 at 4:08 PM, KIM SEYEON [김세연]_FA : @Dear shift leader If you need stack station material, please contact RTD/MCS OP like below. @mcs rtd please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate RTD will send you materials. Receive them at the VD storage manual port as usual. please don't touch any kiosk for load material by operators. strictly prohibited. Thanks. Ivancsa FA Seyeon Kim @김세연PM_법인FA_SKon May 7, 2025 at 4:08 PM, KIM SEYEON [김세연]_FA : ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆ please don't touch any kiosk for load material by operators. strictly prohibited May 7, 2025 at 4:08 PM, KIM SEYEON [김세연]_FA : ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆ please don't touch any kiosk for load material by operators. strictly prohibited May 7, 2025 at 4:09 PM, KIM SEYEON [김세연]_FA : ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆ please don't touch any kiosk for load material by operators. strictly prohibited May 7, 2025 at 4:17 PM, Ashley🖤💚✨ : 9 line of external pages are missing from the #15 AGV. Please help. Thank you. May 7, 2025 at 4:21 PM, Péti Gábor : Please write 1F group! May 7, 2025 at 4:21 PM, 카스텔 발라지 F.A. : Working on it 👍 May 7, 2025 at 4:43 PM, Jun(정우준)_SKOH FA : 금일 노칭 생산 담당자 연락 부탁드립니다. 명일 2라인 버스트 런 대비, 매거진 순환을 위해 공매거진을 EQ장비에 채워 놓아야합니다. May 7, 2025 at 4:50 PM, Jun(정우준)_SKOH FA : @이도형 (Lee) 협조 감사합니다. May 7, 2025 at 5:19 PM, Sazzad Bhai SKon : GF Next lot quantity available VD Pre STK > Notching • Anode: 87 • Cathode: 198 VD Pre STK > VD • Anode: 90 • Cathode: 02 VD Post STK > Stacking • Anode: 33 • Cathode: 05 GF NC reel Available lot 4/5 line • AN: 277 • CA: 26 Thank you May 7, 2025 at 5:43 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check E0STKA52_C01 there is travel driver error. Thank you! May 7, 2025 at 5:53 PM, 하연철(HA YEONCHEOL)/ : @FA Please check E0CNV52 Thank you May 7, 2025 at 5:55 PM, 하연철(HA YEONCHEOL)/ : And C0PAV30, 10 May 7, 2025 at 6:00 PM, QuangPhan : Hello! Good evening! @FA NC AN Robot #3 error. Thanks May 7, 2025 at 6:03 PM, QuangPhan : @FA NC AN E0CNVA52 error. Thanks May 7, 2025 at 6:22 PM, 이민재 : Day shift FA Schedule Date: 2025.05.07 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 7, 2025 at 6:38 PM, 하연철(HA YEONCHEOL)/ : @mcs Can you check if there are any products from Line 2 in the VD warehouse? thx May 7, 2025 at 6:41 PM, VK (mcs) : For 2nd line Cathode: 2 carriers Anode: 4 carriers Are ready for VD process May 7, 2025 at 6:42 PM, 하연철(HA YEONCHEOL)/ : Can you tell me your carrier ID? Thank you. May 7, 2025 at 6:43 PM, Yaroslav SL/C 6 line : Hello everyone @mcs please share available lot. Thanks May 7, 2025 at 6:44 PM, VK (mcs) : Anode: MLA0176 MLA2246 MLA4031 MLA0177 Cathode: MLC2104 MLC2173 May 7, 2025 at 6:50 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 88 • Cathode: 199 Pre STK > VD • Anode: 80 • Cathode: 00 Post STK > Stacking • Anode: 30 • Cathode: 10 Reel STK > Notching • AN: 286 • CA: 00 May 7, 2025 at 7:05 PM, QuangPhan : Hello! @FA Please check AGV empty MGZ loader for line 5, line 6, 4/1 AN. Almost out of empty Mgz because AGV is not delivering. thanks. May 7, 2025 at 7:14 PM, VK (mcs) : @FA Please check Anode first Gantry C0PVA010-P11 MA2024 doesn’t transferred. May 7, 2025 at 7:14 PM, 동현 : @Fa Plz check GF stacking AGV 10 near Line 6 ,now AGV 9 is blocked by AGV 10. May 7, 2025 at 7:15 PM, QuangPhan : Hello! @FA Nc AN Robot #1 error. Thanks May 7, 2025 at 7:34 PM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN Line 4,5 . We didn’t recieved material for a while. May 7, 2025 at 7:36 PM, VK (mcs) : STK is busy I will monitor it . Thx May 7, 2025 at 7:46 PM, QuangPhan : Thank you May 7, 2025 at 7:50 PM, 이한웅(삼구) : please check #2 agv May 7, 2025 at 7:50 PM, 이한웅(삼구) : NC Ca May 7, 2025 at 7:51 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check stack agv errors May 7, 2025 at 7:58 PM, QuangPhan : Hello! @FA VD AN C1STKA71 error. Thanks May 7, 2025 at 8:15 PM, T. Gàbornè C SL NC : @Fa Please come CA NC 4/3 machine, mgz position NG Thx May 7, 2025 at 8:17 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 98 • Cathode: 207 Pre STK > VD • Anode: 83 • Cathode: 00 Post STK > Stacking • Anode: 23 • Cathode: 22 Reel STK > Notching • AN: 301 • CA: 00 May 7, 2025 at 8:28 PM, Dima Kusyk : @fa @mcs Good evening everyone! At the moment there are a lot of empty AGV stations, in the warehouse the material is available but AGV robots do not have time to perform many tasks. Is it possible that we will remove all empty Magazines from the AGV station and immediately call AGV Robots to load the material, and we will load all empty Magazines manually into the warehouse? May 7, 2025 at 8:30 PM, VK (mcs) : Is it stacking area? May 7, 2025 at 8:31 PM, Dima Kusyk : Yes May 7, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : It is possible. But remove magazines and plate at the same time. and push LR immediately. May 7, 2025 at 8:34 PM, VK (mcs) : As I see there are many jobs and AGVs are busy. For upper case it’s better to transfer automatically, but if it’s emergency case then please do it by FA technicians. thx May 7, 2025 at 8:36 PM, Dima Kusyk : Do we need to ask FA techs for help unloading empty Magazines from AGV Station? May 7, 2025 at 8:36 PM, KIM SEYEON [김세연]_FA : @Dima Kusyk it is better that AGV works and manually move full magazine plate from vd storage to near stack station. if you remove the place manually, I am concerned that the data will be interfered. May 7, 2025 at 8:37 PM, VK (mcs) : But even if you remove MGZs, in ACS there are some jobs in queue. May 7, 2025 at 8:37 PM, KIM SEYEON [김세연]_FA : @Dima Kusyk so please not remove magazines from the station. May 7, 2025 at 8:38 PM, KIM SEYEON [김세연]_FA : I will load some full magazine plates, please take the plates near the stacking and start production. May 7, 2025 at 8:39 PM, KIM SEYEON [김세연]_FA : @Dima Kusyk did you get my point? May 7, 2025 at 8:40 PM, Dima Kusyk : Yes, thank you May 7, 2025 at 8:41 PM, QuangPhan : Hello! @FA NC AN E0CNVA52 error. Thanks May 7, 2025 at 8:41 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate May 7, 2025 at 8:42 PM, KIM SEYEON [김세연]_FA : please go to vd manual port. you can get ca plates. May 7, 2025 at 8:47 PM, VK (mcs) : Materials have been released. May 7, 2025 at 8:53 PM, VK (mcs) : @FA Please check Anode Reel conveyor E0CNVA52 RTV Data loss error. May 7, 2025 at 9:01 PM, KIM SEYEON [김세연]_FA : @Lajos Gábor F.A. please check this May 7, 2025 at 9:02 PM, KIM SEYEON [김세연]_FA : @Dima Kusyk please let me know what material you need to bring manually. May 7, 2025 at 9:02 PM, KIM SEYEON [김세연]_FA : you can request like this format. May 7, 2025 at 9:02 PM, KIM SEYEON [김세연]_FA : @Dear shift leader If you need stack station material, please contact RTD/MCS OP like below. @mcs rtd please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate RTD will send you materials. Receive them at the VD storage manual port as usual. please don't touch any kiosk for load material by operators. strictly prohibited. Thanks. Ivancsa FA Seyeon Kim @김세연PM_법인FA_SKon May 7, 2025 at 9:03 PM, Dima Kusyk : Okay, I get it. Thank you! May 7, 2025 at 9:46 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 102 • Cathode: 203 Pre STK > VD • Anode: 65 • Cathode: 00 Post STK > Stacking • Anode: 36 • Cathode: 09 Reel STK > Notching • AN: 316 • CA: 08 May 7, 2025 at 10:09 PM, T. Gàbornè C SL NC : @Fa Please come CA 6/2 mgz plate position error. Thx May 7, 2025 at 10:19 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16100) Carrier is not moving. May 7, 2025 at 10:24 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot May 7, 2025 at 10:26 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 108 • Cathode: 209 Pre STK > VD • Anode: 65 • Cathode: 03 Post STK > Stacking • Anode: 34 • Cathode: 04 Reel STK > Notching • AN: 321 • CA: 02 May 7, 2025 at 10:35 PM, QuangPhan : Hello! @MCS Can you please check RTV - NC AN supply reels for line 2. We are receiving the reels very slowly. May 7, 2025 at 10:40 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 ports 7 & 9 (7036)(7034) Carriers do not transferring to the STK. May 7, 2025 at 11:52 PM, Yaroslav SL/C 6 line : @mcs please share available lot. Thanks May 7, 2025 at 11:55 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 99 • Cathode: 215 Pre STK > VD • Anode: 68 • Cathode: 00 Post STK > Stacking • Anode: 36 • Cathode: 00 Reel STK > Notching • AN: 327 • CA: 00 May 7, 2025 at 11:56 PM, FACS_Wooseok Choi invited FACS_Bareum kim. May 7, 2025 at 11:57 PM, Yaroslav SL/C 6 line : @fa please check conveyor near ST 456 lines. Tray data mismatch May 8, 2025 at 12:05 AM May 8, 2025 at 12:05 AM, T. Gàbornè C SL NC : @MCS Please check why you are slowly coming to the Ca 4#2 on the empty mgz. Thank you for much. May 8, 2025 at 12:12 AM, VK (mcs) : We received LR but currently there is no Empty MGZ in Gantry. Also before 4/2 machine, there is LR May 8, 2025 at 1:06 AM, VK (mcs) : @FA Can you please check it. It’s not solved yet. Thx May 8, 2025 at 1:36 AM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 89 • Cathode: 217 Pre STK > VD • Anode: 83 • Cathode: 00 Post STK > Stacking • Anode: 34 • Cathode: 08 Reel STK > Notching • AN: 325 • CA: 01 May 8, 2025 at 1:52 AM, Kertész Dániel : Can you check why the LTA0681 is not moving from the 7036 to the 7045? May 8, 2025 at 1:55 AM, VK (mcs) : Everything in MCS side is fine and reply is successful. As I checked Log , port went OoS several times and after that carrier is just stopped. May 8, 2025 at 2:36 AM, 하연철(HA YEONCHEOL)/ : @FA CA Notching RTV Down May 8, 2025 at 2:37 AM, Kertész Dániel : @VK (mcs) Please delete the "Load Request" from the 7009. May 8, 2025 at 2:38 AM, Dima Kusyk : @fa @mcs Please delete all operation “LR” for line 4/STK. Thank you! May 8, 2025 at 2:39 AM, VK (mcs) : Job cancelled May 8, 2025 at 2:43 AM, VK (mcs) : All LR for 4th line stacking cleared. May 8, 2025 at 3:18 AM, T. Gàbornè C SL NC : @MCS Please check AGV no move empty mgz the CA 4#3. Thanks May 8, 2025 at 3:23 AM, VK (mcs) : 2 jobs assigned to cathode 4/3 May 8, 2025 at 3:44 AM, 이한웅(삼구) : please check VD Ca #5 AGV May 8, 2025 at 4:24 AM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 87 • Cathode: 210 Pre STK > VD • Anode: 108 • Cathode: 00 Post STK > Stacking • Anode: 17 • Cathode: 13 Reel STK > Notching • AN: 330 • CA: 00 May 8, 2025 at 4:35 AM, QuangPhan : Hello! @MCS Could you please make priority GF NC AN side for line 2 please . We need to collect enough reels to prepare for line 2 production this morning. May 8, 2025 at 4:37 AM, VK (mcs) : @FA Please check anode reel conveyor A52 E0CNVA52-M09 (7036) Same problem . Carrier is not moving ! Thx May 8, 2025 at 5:37 AM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNV 52 RTV doesn’t transfer carrier. May 8, 2025 at 5:48 AM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel please check rtv May 8, 2025 at 6:22 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! GF Next LOT quantity available Pre STK > Notching • Anode: 70 • Cathode: 201 Pre STK > VD • Anode: 96 • Cathode: 03 Post STK > Stacking • Anode: 37 • Cathode: 13 Reel STK > 4/5 line Notching • AN: 304 • CA: 00 May 8, 2025 at 6:26 AM, 이도형 (Lee) : please check VD Ca #5 AGV May 8, 2025 at 6:40 AM, 이도형 (Lee) : please check VD An #8 AGV May 8, 2025 at 6:41 AM, Zaya/ivancsa FA : im here May 8, 2025 at 6:47 AM, Jun(정우준)_SKOH FA : Day Shift FA Technician Schedule Date: 25. May. 8 Time: 06:00~18:00 1. Jeong Woo-jun May 8, 2025 at 6:54 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András, Kiss Balázs Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsokt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 8, 2025 at 8:18 AM, Jun(정우준)_SKOH FA : @ ST4,5,6 Shift leader. When the AGV takes the carrier, Press the LR button immediately. thanks. May 8, 2025 at 8:22 AM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available Pre STK > Notching • Anode: 63 • Cathode: 191 Pre STK > VD • Anode: 81 • Cathode: 01 Post STK > Stacking • Anode: 60 • Cathode: 06 Reel STK > 4/5 line Notching • AN: 286 • CA: 06 May 8, 2025 at 8:28 AM, Péti Gábor : @Ivan Kasian Sl 5L 🥹 @Betti B SL @KollerCsaba 처버 Чобо May 8, 2025 at 8:33 AM, 동현 : @members who are in charge of ST Line 4,5,6 Plz push the Lr button if there is no material in ST station in order to receive materials properly in ST line May 8, 2025 at 8:59 AM, 김수민 : @KIM SEYEON [김세연]_FA @방혁 PM(Bang.Hyuk) FA 음극 2-3 실매거진 배출부 컨베이어 런타임 알람 지속 발생중입니다. 확인부탁드립니다 May 8, 2025 at 8:59 AM, KIM SEYEON [김세연]_FA : 확인하겠습니다. May 8, 2025 at 9:24 AM, 안진모 An Jin Mo : AGV #5 NC Ca #2-2 앞에 Align Switch Limit 발생하였습니다 확인부탓드립니더 May 8, 2025 at 9:40 AM, 연해리 : 우선 생산 이어나가야해서 R@R 종료 이후 오후 13시 30분에 작업 진행하겠습니다 May 8, 2025 at 10:01 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Anode reel RTV error. Thank you May 8, 2025 at 10:03 AM, N.Zoli F.A. : Korean technicians are working on it May 8, 2025 at 10:08 AM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA Please LR for VD CA 6-5 half chamber. Thank you. May 8, 2025 at 10:32 AM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available Pre STK > Notching • Anode: 58 • Cathode: 180 Pre STK > VD • Anode: 103 • Cathode: 02 Post STK > Stacking • Anode: 32 • Cathode: 00 Reel STK > 4/5 line Notching • AN: 282 • CA: 48 May 8, 2025 at 12:22 PM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available Pre STK > Notching • Anode: 37 • Cathode: 161 Pre STK > VD • Anode: 107 • Cathode: 00 Post STK > Stacking • Anode: 34 • Cathode: 00 Reel STK > 4/5 line Notching • AN: 269 • CA: 80 May 8, 2025 at 1:35 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKA71 stocker error. Thank you May 8, 2025 at 2:16 PM, Shahbaz 샤바즈 MCS/RTD : GF Next LOT quantity available Pre STK > Notching • Anode: 22 • Cathode: 148 Pre STK > VD • Anode: 97 • Cathode: 03 Post STK > Stacking • Anode: 52 • Cathode: 00 Reel STK > 4/5 line Notching • AN: 274 • CA: 76 May 8, 2025 at 3:24 PM, 최정한.KOVA : 음극 6-1 진공도 도달못함 알람발생. 확인한결과 설비후면부 배관 클램프(나비볼트) 덜조임상태확인됨. - 캘리브레이션팀 및 보전팀 당부드립니다. TC센서 캘리브레이션후 클램프 강하게 조여주세요. 챔버내 매거진 AGV 수동반출해주세요. May 8, 2025 at 3:28 PM, 이도형 (Lee) : @FA An 6-1 Manual magazine removal May 8, 2025 at 3:31 PM, 이도형 (Lee) : VD AN #46 May 8, 2025 at 3:40 PM, 이도형 (Lee) : please check VD Ca #5 AGV May 8, 2025 at 3:52 PM, Zaya/ivancsa FA : 6-1 chamber is empty now May 8, 2025 at 4:09 PM, 정은탁 (Jung EunTak) : @mcs Can you check if there are any products from Line 2 in the VD warehouse? May 8, 2025 at 4:10 PM, Shahbaz 샤바즈 MCS/RTD : Available lots: AN: 17 CA: 0 May 8, 2025 at 4:13 PM, 정은탁 (Jung EunTak) : Can you tell me your carrier ID? Thank you. May 8, 2025 at 4:17 PM, Shahbaz 샤바즈 MCS/RTD : MLA4238, MLA4197, MLA1246, MLA6091, MLA6141, MLA1014, MLA6039, MLA4050, MLA6068, MLA4139, MLA0125, MLA4104, MLA6137, MLA0148, MLA4107, MLA4014, MLA0240 May 8, 2025 at 5:40 PM, 김수민 : @Shahbaz 샤바즈 MCS/RTD Please check the entire front warehouse for materials that can be shipped AN VD Line 2. May 8, 2025 at 5:41 PM, Shahbaz 샤바즈 MCS/RTD : Available lots for line 2: AN: 04 CA: 02 May 8, 2025 at 5:41 PM, Shahbaz 샤바즈 MCS/RTD : MLC4096,3088 May 8, 2025 at 5:42 PM, Shahbaz 샤바즈 MCS/RTD : MLA6137,0148,4107,4014,0240 May 8, 2025 at 6:11 PM, QuangPhan : Hello! Good evening! @FA NC AN Robot #1 error. Thanks May 8, 2025 at 6:17 PM, T. Gàbornè C SL NC : @fa Hello Please help. VD CA #53 5-8 Right top NFB off state, please plate move in the Storage. Thx May 8, 2025 at 6:23 PM, T. Gàbornè C SL NC : @fa Please check CA NC AGV7, the machine stop. Thx May 8, 2025 at 6:32 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 00 • Cathode: 132 Pre STK > VD • Anode: 90 • Cathode: 01 Post STK > Stacking • Anode: 61 • Cathode: 00 Reel STK > 4/5 line Notching • AN: 300 • CA: 116 May 8, 2025 at 7:44 PM, VK (mcs) : @FA Can you please check Anode Pre-STK A71 manual port. Is there an actual Carrier? C1STK A71 -M01 or OP01 (6003) (6023) May 8, 2025 at 8:14 PM, 전 운 (Jeon Woon) : Plz Rechecking May 8, 2025 at 8:17 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 00 • Cathode: 126 Pre STK > VD • Anode: 98 • Cathode: 03 Post STK > Stacking • Anode: 58 • Cathode: 01 Reel STK > 4/5 line Notching • AN: 273 • CA: 84 May 8, 2025 at 8:25 PM, T. Gàbornè C SL NC : @FA CA VD 4/8 AGV loading finished but machine does not start Please check CA VD 5/8 Please send the AGV the plate move in the Storage. Thx May 8, 2025 at 8:53 PM, Dima Kusyk : @fa Line 4/STK AGV2 stopped near STK01, please check. Thanks May 8, 2025 at 8:54 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 unit (16100) MLA2044 is not moving. May 8, 2025 at 8:55 PM, KIM SEYEON [김세연]_FA : @Chinges Fa please check May 8, 2025 at 8:58 PM, 안종수 : NC AN #10 AGV ERROR. Please check @FA May 8, 2025 at 9:12 PM, VK (mcs) : @FA Problem still not solved. Please check it.thx May 8, 2025 at 9:51 PM, T. Gàbornè C SL NC : @Fa Please check VD CA AGV#5. Thx May 8, 2025 at 10:03 PM, QuangPhan : Hello! @FA @AGV . VD AN 4-7 #34 the plates was wrong position . Please use agv to fix it . thank you May 8, 2025 at 10:13 PM, Amgaa FA : solved May 8, 2025 at 10:25 PM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 00 • Cathode: 118 Pre STK > VD • Anode: 99 • Cathode: 02 Post STK > Stacking • Anode: 69 • Cathode: 06 Reel STK > 4/5 line Notching • AN: 286 • CA: 70 May 9, 2025 at 12:05 AM May 9, 2025 at 12:05 AM, QuangPhan : Hello! @FA @AGV . VD AN 2-7 #16 AGV_TP2 Ti meout Error. thank you May 9, 2025 at 12:07 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 unite (16144) &(16142) MLA0190 destination was STK but job terminated by OP action MLA6114 destination was STK but this one also terminated by OP action. May 9, 2025 at 12:12 AM, VK (mcs) : @FA Please check Anode Reel STK A52 Travel time over error! May 9, 2025 at 12:12 AM, Dariimaa/다리마/Ivancsa : Solved May 9, 2025 at 12:45 AM, 인제(Hwang) : NC Ca Robot#3 Error May 9, 2025 at 1:20 AM, QuangPhan : Hello NC AN Robot #3 error. Thanks May 9, 2025 at 2:03 AM, 전 운 (Jeon Woon) : @FA Please Check C1CNV072 Plate Is not Moving!!!!!! May 9, 2025 at 2:07 AM, Dariimaa/다리마/Ivancsa : Solved May 9, 2025 at 2:23 AM, Dima Kusyk : @fa Line 4/STK AGV 1 stopped near STK1, please check. May 9, 2025 at 2:25 AM, Dima Kusyk : @mcs @fa Someone in FA manual Robot mode took empty Magazines from AGV station. STK01 AN. And now we cannot press the LR button May 9, 2025 at 2:28 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 unit (16100) MLA6080 is not moving. May 9, 2025 at 2:28 AM, T. Gàbornè C SL NC : @FA CA 5-7 kemencéből vissza kellene a raktárba küldeni a plateket az AGV-,vel. Légyszíves segítsetek ebben. Köszönöm szépen May 9, 2025 at 2:32 AM, Kertész Dániel : This message was deleted. May 9, 2025 at 2:33 AM, Kertész Dániel : Done May 9, 2025 at 2:33 AM, Kertész Dániel : Sorry, which port is it? May 9, 2025 at 2:34 AM, Dima Kusyk : I don’t know May 9, 2025 at 2:39 AM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 00 • Cathode: 83 Pre STK > VD • Anode: 102 • Cathode: 04 Post STK > Stacking • Anode: 84 • Cathode: 29 Reel STK > 4/5 line Notching • AN: 333 • CA: 11 May 9, 2025 at 2:40 AM, Dima Kusyk : @fa @mcs someone please come to line 4/STK1. I don't know how, but when someone FA was manually taking with AGV robot magazines from AGV station, knocked off all the sensors May 9, 2025 at 2:41 AM, Kertész Dániel : Just a moment and I'm there May 9, 2025 at 2:41 AM, VK (mcs) : It happens again C1CNV072 (16100) MLA4240 Please check again thank May 9, 2025 at 3:13 AM, Dima Kusyk : Line 4/STK AGV 1 stopped near storage, please check May 9, 2025 at 3:27 AM, 전 운 (Jeon Woon) : @FA We are using AGV to bring the plate to 2Line Stack Station. Please check if LR is pressed but it is not coming. May 9, 2025 at 3:31 AM, Baek Hojong(백호종)FA : 확인한번해보겠습니다 조장님 May 9, 2025 at 3:32 AM, Baek Hojong(백호종)FA : @VK (mcs) @FA We are using AGV to bring the plate to 2Line Stack Station. Please check if LR is pressed but it is not coming. May 9, 2025 at 3:33 AM, VK (mcs) : Checking May 9, 2025 at 3:37 AM, 전 운 (Jeon Woon) : 네 우선 Station 4개만 LR 누른 상태입니다. May 9, 2025 at 3:38 AM, VK (mcs) : I checked RTD and there is no available material. Please check MES May 9, 2025 at 4:15 AM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 피엠님 스택2라인 스테이션에서 LR누르는중인데 자재가 없다고 나옵니다. MES에서 2라인에 해당자재 매칭되어 있는지 급하게 확인 필요합니다. May 9, 2025 at 4:15 AM, KIM SEYEON [김세연]_FA : 삼구분들도 할후 있을까요? May 9, 2025 at 4:26 AM, KIM SEYEON [김세연]_FA : 해결되었습니다. May 9, 2025 at 4:28 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 16156 Data loss error. May 9, 2025 at 4:47 AM, 전 운 (Jeon Woon) : W/O 후공정이 Bust Run으로 변경 안되어있어서 그랬던거 같습니다. 우선 제가 변경하였어요. May 9, 2025 at 4:47 AM, VK (mcs) : GF Next LOT quantity available Pre STK > Notching • Anode: 03 • Cathode: 82 Pre STK > VD • Anode: 97 • Cathode: 01 Post STK > Stacking • Anode: 80 • Cathode: 35 Reel STK > 4/5 line Notching • AN: 363 • CA: 00 May 9, 2025 at 5:20 AM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 Carriers are not moving. May 9, 2025 at 5:21 AM, VK (mcs) : Unit 16086 May 9, 2025 at 5:24 AM, Dariimaa/다리마/Ivancsa : Solved May 9, 2025 at 5:29 AM, VK (mcs) : @FA Please check Anode reel STK A52 Travel time over error. May 9, 2025 at 5:53 AM, 이도형 (Lee) : @FA Please check Ca Robot #3 error. May 9, 2025 at 5:55 AM, 이도형 (Lee) : @FA Please check Nc Ca #2 AGV error. May 9, 2025 at 5:55 AM, 이도형 (Lee) : NC May 9, 2025 at 5:56 AM, 임석호(Henry) : 안녕하세요. 금일 2라인 후공정 버스트런 준비 중 문의 드립니다. 워크오더 변경완료 후 반송가능자재 조회 도 되는데 스테이션 LR명령 내렷는데 배송이 되지않고 았어서 확인 부탁 드립니다. May 9, 2025 at 5:57 AM, 이도형 (Lee) : @FA Please check VD Ca AGV #6 error. May 9, 2025 at 5:59 AM, QuangPhan : Hello! @FA NC AN AGV #8 error. Thanks May 9, 2025 at 5:59 AM, 이도형 (Lee) : @FA Please check VD Ca AGV #4 error. May 9, 2025 at 6:00 AM, 임석호(Henry) : 2라인 스택 9번 AGV 알람 발생 했습니다 확인 부탁드립니다. May 9, 2025 at 6:00 AM, duzzaman Md (MCS) : @FA Good morning ! Please check C1CNV072_P17 INV 02 run time error Thank you ! May 9, 2025 at 6:00 AM, T. Gàbornè C SL NC : @FA Good Morning Please check NC CA Robot #3 Robot movement error Thx May 9, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 11/12 Tech, 1Sl Overtime(0): Holiday(0): Sick(1): Gerbovits Kevin --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Böröcz Tamás, Csanálosi Gábor, Kovács Ágnes --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok mennyiségének függvényében May 9, 2025 at 6:02 AM, 임석호(Henry) : This message was deleted. May 9, 2025 at 6:02 AM, duzzaman Md (MCS) : Also C1STKC71_P12 INV RUNTIME OVER ERROR since 05:34 C1STKC72_P13 DATA MISSMATCH ERROR thanks ! May 9, 2025 at 6:02 AM, 임석호(Henry) : @mcs 2라인 스택 반송가능자재 수량 조회 부탁 드립니다. May 9, 2025 at 6:04 AM, 방혁 PM(Bang.Hyuk) FA : Day Shift FA Technician Schedule Date: 25. May. 9 Time: 06:00~18:00 1. BANG HYUK May 9, 2025 at 6:15 AM, duzzaman Md (MCS) : An: 37 Ca: 28 Thank you May 9, 2025 at 6:15 AM, 임석호(Henry) : Thank you May 9, 2025 at 6:16 AM, duzzaman Md (MCS) : You're welcome. Have a wonderful day ahead. May 9, 2025 at 6:16 AM, 임석호(Henry) : @방혁 PM(Bang.Hyuk) FA 안녕하세요 피엠님 2라인 양극은 배송중인데 음극 이 아웃포트로 나오지 않아서 확인이 필요할꺼 같습니다. 지원 부탁드립니다. May 9, 2025 at 6:21 AM, 방혁 PM(Bang.Hyuk) FA : 이송중에있습나다. 조금 기다리시면 나올거에요!! May 9, 2025 at 6:22 AM, 임석호(Henry) : 네 확인 감사합니다! May 9, 2025 at 6:26 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B @FA Pls check C1CNV072 May 9, 2025 at 6:29 AM, Szücs Géza FT-B : Technicians are on site. May 9, 2025 at 6:32 AM, Nguyen Huy : @MCS Hello, NC CA RTV are providing reels quite slowly, can you check it pls? May 9, 2025 at 6:32 AM, 방혁 PM(Bang.Hyuk) FA : @mcs Who make a order FOR C1STKA72? May 9, 2025 at 6:36 AM, duzzaman Md (MCS) : This should be created automatically based on LR received. However, you want me to create some orders, kindly let me know. May 9, 2025 at 6:37 AM, 방혁 PM(Bang.Hyuk) FA : @Geza There is MLC3074 material on the C1CNV072_16027 track, but if it is a Empty magazine, it should be removed. May 9, 2025 at 6:37 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B May 9, 2025 at 6:39 AM, duzzaman Md (MCS) : No abnormalities found. However, keeping an on eye it. Thank you May 9, 2025 at 6:42 AM, Debreczeni Ármin : @duzzaman Md (MCS) Hello please share lot quantity May 9, 2025 at 6:47 AM, duzzaman Md (MCS) : GF Next LOT quantity available Pre STK > Notching • Anode: 00 • Cathode: 81 Pre STK > VD • Anode: 92 • Cathode: 05 Post STK > Stacking • Anode: 87 • Cathode: 39 Reel STK > 4/5 line Notching • AN: 351 • CA: 00 Thank you May 9, 2025 at 6:52 AM, Csanálosi Gábor FA : Was empty, we sent back. May 9, 2025 at 6:53 AM, 방혁 PM(Bang.Hyuk) FA : Thank you Gabor May 9, 2025 at 6:53 AM, Böröcz Tamás : Powered by ACS May 9, 2025 at 6:54 AM, 방혁 PM(Bang.Hyuk) FA : I just wanted to know if it was really empty or system Error😂 May 9, 2025 at 7:00 AM, Debreczeni Ármin : @duzzaman Md (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : 25 plate please send AN stack materials to c1stka72 m01 port Need amount : 20 plate Thanks. May 9, 2025 at 7:01 AM, Debreczeni Ármin : @Kristina please when these are ready transport to lines May 9, 2025 at 7:21 AM, Debreczeni Ármin : @Szücs Géza FT-B Szia Erre megy valami koreai támogatás vagy jön ki és vihetjük? May 9, 2025 at 7:30 AM, Szücs Géza FT-B : Szia, elméletileg May 9, 2025 at 7:30 AM, Debreczeni Ármin : Rendben May 9, 2025 at 7:32 AM, duzzaman Md (MCS) : All sent. Thank you. Let me know when you need more. May 9, 2025 at 7:34 AM, Debreczeni Ármin : Thank you May 9, 2025 at 7:46 AM, duzzaman Md (MCS) : @FA Please check C1STKA71_C02 MCP Mode error Thank you May 9, 2025 at 8:02 AM, duzzaman Md (MCS) : C1STKA72_C01 Port interface error Thank you May 9, 2025 at 8:08 AM, 이도형 (Lee) : @FA Please check VD Ca AGV #10 error. May 9, 2025 at 8:11 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA Can you check? May 9, 2025 at 8:12 AM, Csanálosi Gábor FA : We are here with mongolians May 9, 2025 at 8:20 AM, duzzaman Md (MCS) : GF Next LOT quantity available Pre STK > Notching • Anode: 01 • Cathode: 86 Pre STK > VD • Anode: 83 • Cathode: 03 Post STK > Stacking • Anode: 86 • Cathode: 13 Reel STK > 4/5 line Notching • AN: 341 • CA: 00 Thank you May 9, 2025 at 8:23 AM, Csanálosi Gábor FA : All solved May 9, 2025 at 8:27 AM, Debreczeni Ármin invited Vladyslav Kucher. May 9, 2025 at 8:45 AM, 연해리 : @duzzaman Md (MCS) Hello, Ca Post VD Storage have about 96 Plates. Please check why about 80 plates are not eligible for return. May 9, 2025 at 8:49 AM, Sazzad Bhai SKon : 45 are eligible from 89 plates May 9, 2025 at 8:52 AM, 연해리 : This message was deleted. May 9, 2025 at 8:52 AM, 연해리 : But he said there are only 13 available here. Could this just be a mistake?? May 9, 2025 at 8:55 AM, Nguyen Huy : @MCS RTV L4 L5 Nc CA are providing reels very slow for now, could you pls check ? May 9, 2025 at 8:55 AM, duzzaman Md (MCS) : Yeah, it might have been a typing mistake. Now there are 45 CA materials available. May 9, 2025 at 8:56 AM, Sazzad Bhai SKon : No material on the CNV May 9, 2025 at 8:56 AM, 연해리 : Thank you so much:) May 9, 2025 at 8:57 AM, duzzaman Md (MCS) : Thank you too. Please let us know if you find such discrepancies. We are happy to recheck it always. May 9, 2025 at 9:32 AM, 이도형 (Lee) : @FA Please check NC Ca Robot #3 error. May 9, 2025 at 9:38 AM, Csanálosi Gábor FA : Done May 9, 2025 at 9:53 AM, 최정한.KOVA : VD 6-8 상부우측 오른쪽 플레이트감지센서 고장입니다.교체해주세요. May 9, 2025 at 9:56 AM, 임석호(Henry) : С1СNV072 알람발생 했습니다 확인부탁드려요 May 9, 2025 at 9:56 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA May 9, 2025 at 9:58 AM, Csanálosi Gábor FA : @Böröcz Tamás May 9, 2025 at 10:02 AM, Böröcz Tamás : @연해리 @Yon Ko/연커/ was there May 9, 2025 at 10:12 AM, 연해리 : cleared May 9, 2025 at 10:20 AM, 심재훈 : 펨님 혹시 아까 80개 원인이 뭔가요?? May 9, 2025 at 10:22 AM, 조범희 : @방혁 PM(Bang.Hyuk) FA PM님 MCS로직 문제는 해결됬나요? May 9, 2025 at 10:22 AM, 연해리 : MCS 모니터링 해주시는분 쪽에서 잘못 작성했다고 하십니다.. 9시 기준으로 반송가능자재 45개 있는 것으로 확인했습니다 May 9, 2025 at 10:23 AM, duzzaman Md (MCS) : Sending lots soon May 9, 2025 at 10:26 AM, Dmytro Poluekto invited Valentyn and Diana. May 9, 2025 at 10:27 AM, Böröcz Tamás : There are data transmission problems on the conveyor, immediate intervention is required. Otherwise, stacking will stop. May 9, 2025 at 10:27 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 80 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 84 VD Post STK > Stacking - Cathode: 27 - Anode: 72 GF NC reel Available lot - CA: 00 - AN: 356 Thank you May 9, 2025 at 10:35 AM, 심재훈 : 80이랑 숫자랑 아직 다른데, 혹시 보류 잡힌게 있나요? May 9, 2025 at 10:45 AM, KIM SEYEON [김세연]_FA : Photo May 9, 2025 at 10:45 AM, KIM SEYEON [김세연]_FA : 요거 말씀이신가요? May 9, 2025 at 10:47 AM, Sazzad Bhai SKon : Yes you are true. Even though 80 is full but only 45 was eligible. For example MLA2014 was full but machine/unit was null. So it is not included in 45 May 9, 2025 at 10:48 AM, Sazzad Bhai SKon : If you need more information, I'll analyze why 40 (80-45) was not eligible for stacking May 9, 2025 at 10:52 AM, Sazzad Bhai SKon : *MLC2014 MES data is 102 but only 24 is eligible for delivery May 9, 2025 at 10:53 AM, 연해리 : Yes, we need to produce all the materials in our warehouse to the maximum. Please tell us what is not being transported and why. May 9, 2025 at 10:55 AM, Sazzad Bhai SKon : I'll reply you soon May 9, 2025 at 10:58 AM, Sazzad Bhai SKon : Among 102 plates, 55 plates eliminated due lot count is below '6' May 9, 2025 at 11:07 AM, Sazzad Bhai SKon : Rest of them are not inside STK ( for example some already arrived to stacking machine) May 9, 2025 at 11:15 AM, 정은탁 (Jung EunTak) : This message was deleted. May 9, 2025 at 11:16 AM, 정은탁 (Jung EunTak) : @FA Please check NC An AGV #9 error. May 9, 2025 at 11:22 AM, Csanálosi Gábor FA : Done May 9, 2025 at 11:51 AM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 98 - Anode: 10 VD Pre STK > VD - Cathode: 01 - Anode: 75 VD Post STK > Stacking - Cathode: 27 - Anode: 79 GF NC reel Available lot - CA: 00 - AN: 359 Thank you May 9, 2025 at 12:54 PM, Truong : NC Cathote 4/3 AGV#2 error please come check May 9, 2025 at 1:08 PM, Nguyen Huy : @MCS Hello, can you pls check for me which plate ID contain these mgz: MA1089, MA5315, MA5287 I need to take it out because it located in the C71 warehouse now May 9, 2025 at 1:12 PM, duzzaman Md (MCS) : The carrier ID is MLC0066 Located in C1STKC71 Unit 0105203 Thank you May 9, 2025 at 1:44 PM, 임석호(Henry) : 안녕하세요 2라인 스택 반송가능자재 조회부탁드립니다. May 9, 2025 at 1:57 PM, 임석호(Henry) : @duzzaman Md (MCS) May 9, 2025 at 1:58 PM, 최태영 : he requested to check GF Stacking 2 line availability LOT May 9, 2025 at 2:08 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 107 - Anode: 04 VD Pre STK > VD - Cathode: 00 - Anode: 71 VD Post STK > Stacking - Cathode: 39 - Anode: 131 GF NC reel Available lot - CA: 00 - AN: 343 Thank you May 9, 2025 at 2:24 PM, 최정한.KOVA : VD AN 4-3 좌측 안착불량입니다. AGV 재안착해주세요 May 9, 2025 at 2:31 PM, Nguyen Huy : @FA Hello, pls check AGVs in NC AN, they're all idling May 9, 2025 at 2:45 PM, 임석호(Henry) : Tényleg ennyi a visszaküldhető anyag, ami a 2-es sor ST-re érkezik? May 9, 2025 at 2:51 PM, duzzaman Md (MCS) : For stacking line AN: 00 CA:00 May 9, 2025 at 2:51 PM, duzzaman Md (MCS) : Line 2* May 9, 2025 at 2:51 PM, 임석호(Henry) : Thank You For~👍 May 9, 2025 at 2:52 PM, duzzaman Md (MCS) : Its because lot count is 6 for any of them May 9, 2025 at 2:55 PM, duzzaman Md (MCS) : Is not* May 9, 2025 at 3:16 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) pls create job for GF AN NC agv #3, i had to delete it becouse traffic jam. May 9, 2025 at 3:21 PM, duzzaman Md (MCS) : Already created by User C0ngva01 May 9, 2025 at 3:43 PM, 방혁 PM(Bang.Hyuk) FA : @mcs Pls delete a job for MLA2057 at C1STKA72 May 9, 2025 at 3:46 PM, duzzaman Md (MCS) : Already done. Thank you. May 9, 2025 at 3:47 PM, 방혁 PM(Bang.Hyuk) FA : But it is still in SCS May 9, 2025 at 3:48 PM, duzzaman Md (MCS) : @SCS Please take care of it. Thanks May 9, 2025 at 3:54 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 109 - Anode: 02 VD Pre STK > VD - Cathode: 03 - Anode: 69 VD Post STK > Stacking - Cathode: 39 - Anode: 137 GF NC reel Available lot - CA: 00 - AN: 337 Thank you May 9, 2025 at 4:58 PM, duzzaman Md (MCS) : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 135 - Anode: 10 VD Pre STK > VD - Cathode: 02 - Anode: 59 VD Post STK > Stacking - Cathode: 58 - Anode: 156 GF NC reel Available lot - CA: 00 - AN: 312 Thank you May 9, 2025 at 5:21 PM, Nguyen Huy : @FA Pls check AGVs in NC CA, most of them are idling and it blocking the way, can you move it to another place? Thank you May 9, 2025 at 5:30 PM, Csanálosi Gábor FA : Seems now its okay. May 9, 2025 at 5:46 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.09 Time:18:00~06:00 1. Lee jubong 이주봉PM 2.Samkoo choi myoung woon 최명운 3.김정희 Köszönöm szépen May 9, 2025 at 5:49 PM, Nguyen Huy : @FA AGV #8 failure when take out full mgz in NC AN 5/3, pls check May 9, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 9, 2025 at 6:27 PM, Barta Rudi : Hello. The cathode reels are arriving very slowly, and I don’t see any tasks for rows 4 and 5. The reels on those lines are running out, and the machines will soon stop. Could someone please check on this? Thanks. May 9, 2025 at 6:34 PM, Mohammad Amir : Unfortunately there is no Cathode reels available. Thank you very much! May 9, 2025 at 6:41 PM, Mohammad Amir : Two reels are on the way for line -6. ✅ I am monitoring. Thank you very much! May 9, 2025 at 6:43 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 138 - Anode: 21 VD Pre STK > VD - Cathode: 03 - Anode: 68 VD Post STK > Stacking - Cathode: 37 - Anode: 144 GF NC reel Available lot - CA: 00 - AN: 304 Thank you May 9, 2025 at 7:19 PM, 최명운(CHOI MYOUNGWOON) : . May 9, 2025 at 7:26 PM, Nguyên : NC AN GF AGV#8 Error May 9, 2025 at 7:29 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. @Yon Ko/연커/ Please check C1CNV072_P15 there is INV-02 Runtime over error and because of this stacking materials delivery has been stopped. Please resolve this issue on priority as it is affecting the production. Thank you very much! May 9, 2025 at 7:37 PM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please assign someone to this error as because of this there is lack of stacking materials for stacking process. Thank you very much! May 9, 2025 at 7:45 PM, Nguyên : NC AN GF AGV#8 Error C2STKA71-P11-MCP Error Come check for me May 9, 2025 at 7:45 PM, KIM SEYEON [김세연]_FA : @Nandia FA @Amgaa FA please check stacking line 5 conveyor error. May 9, 2025 at 7:46 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check fa technician for check c2stka71 p11 mcp error May 9, 2025 at 7:47 PM, Mohammad Amir : @Manufacturing @Betti B SL Please check C1CNV072_M01 there is 1+7 carriers are waiting and it is slowing down stacking materials delivery. Please remove it . Thank you very much! May 9, 2025 at 7:48 PM, Mohammad Amir : @FA @Imre Please check E0CNVA52_07_003 there is Data mismatch error. Thank you very much! May 9, 2025 at 8:06 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 134 - Anode: 21 VD Pre STK > VD - Cathode: 03 - Anode: 87 VD Post STK > Stacking - Cathode: 36 - Anode: 118 GF NC reel Available lot - CA: 00 - AN: 282 Thank you May 9, 2025 at 8:18 PM, Mohammad Amir : @FA @Imre Please check E0CNVA52_07_003 there is Data mismatch error. Thank you very much! May 9, 2025 at 8:27 PM, Mohammad Amir : @FA @Vékony Ferenc @Bonnyai Ákos Please check this error still exists. Thank you very much! May 9, 2025 at 8:28 PM, Nguyên : NC AN GF C2STKA71-P11-MCP Error Come check for me May 9, 2025 at 8:36 PM, Elena Dzhul : @FA AGV10 stopped near ST/4L, machine 16,please check. Thanks! May 9, 2025 at 8:38 PM, Mohammad Amir : @FA Please check this issue still exists since 8:11 PM. Thank you very much! May 9, 2025 at 8:39 PM, Mr.Miti (미티) FA : C2STKA71-P11 is on 1F May 9, 2025 at 9:11 PM, Elena Dzhul : AGV 10 has stopped again near machine 16. It is blocking the movement of other AGV. Please check it May 9, 2025 at 9:14 PM, Elena Dzhul : @FA Also AGV 1 is stopped near machine ST18/L4. Please check it May 9, 2025 at 9:26 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 138 - Anode: 07 VD Pre STK > VD - Cathode: 03 - Anode: 84 VD Post STK > Stacking - Cathode: 38 - Anode: 129 GF NC reel Available lot - CA: 00 - AN: 264 Thank you May 9, 2025 at 10:17 PM, Mohammad Amir : This message was deleted. May 9, 2025 at 10:23 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 145 - Anode: 08 VD Pre STK > VD - Cathode: 00 - Anode: 73 VD Post STK > Stacking - Cathode: 37 - Anode: 142 GF NC reel Available lot - CA: 00 - AN: 273 Thank you very much! May 9, 2025 at 10:28 PM, 이주봉PM LEE JUBONG(FA) : @최명운(CHOI MYOUNGWOON) Gf stack agv 08호기 확인해주세요 May 9, 2025 at 10:55 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Load Oversize Error (Left). Thank you very much! May 9, 2025 at 11:00 PM, Nguyên : NC AN GF AGV#8 Error May 9, 2025 at 11:11 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Travel Driver Error. Thank you very much! May 9, 2025 at 11:39 PM, Mohammad Amir : @Nagy Tibor @FA Please check E0CNVC52_RTV01 there is Run time Over Error and it has blocked the CA reels delivery, please check the issue on priority. Thank you very much! May 9, 2025 at 11:43 PM, Nagy Tibor : solved May 9, 2025 at 11:44 PM, Mohammad Amir : Thank you very much! May 9, 2025 at 11:45 PM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 148 - Anode: 10 VD Pre STK > VD - Cathode: 03 - Anode: 68 VD Post STK > Stacking - Cathode: 40 - Anode: 149 GF NC reel Available lot - CA: 00 - AN: 254 Thank you very much! May 9, 2025 at 11:46 PM, Nguyên : NC AN GF AGV#8 Error can you fix it for me.it keeps crashing and it won't put the tray in the 5/3 machine May 9, 2025 at 11:47 PM, Nguyên : Machine 5/3 continuously has to stop due to lack of MGZ May 9, 2025 at 11:50 PM, Mohammad Amir : There is already two job for 5-3 NC AN. AGV#9 and AGV#8 om the way ✅. @Nagy Tibor @FA @ACS Please check NC AN AGV#8 ,it is showing Align SW Limit "-" alarm since 22:50. This alarm is getting cleared but appearing again and again and because of this job fod empty magazine is being delayed for almost an hour. Please check on priority. Thank you very much! May 9, 2025 at 11:53 PM, Nguyên : AGV#8got an error and it won't let MGZ in May 9, 2025 at 11:54 PM, Nguyên : I have reported it many times but it still hasn't been fixed. May 9, 2025 at 11:56 PM, Mohammad Amir : @Yon Ko/연커/ @FA Could you please check this issue machine 5-3 NC AN production is getting affected because of this issue. Thank you very much! May 9, 2025 at 11:57 PM, Lee Junghan(이정한)_CS : @Mohammad Amir Mr.Amir. How many time happened E0STKA52_C01 Travel Driver Error at this evening? May 9, 2025 at 11:58 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Load Oversize Error (Left). Thank you very much! May 9, 2025 at 11:58 PM, Mohammad Amir : Sure Sir , Checking! Thank you very much! May 9, 2025 at 11:58 PM, Nguyên : The machine has no problem. The problem is that AGV No. 8 does not put the tray into the machine. May 9, 2025 at 11:59 PM, Lee Junghan(이정한)_CS : Load over size as well. May 9, 2025 at 11:59 PM, Mohammad Amir : Yes , exactly 💯 That's why I reported to ACS member , because of AGV#8 issueyou are witnessing delay. Thank you very much! May 10, 2025 at 12:04 AM May 10, 2025 at 12:04 AM, Mohammad Amir : Dear Sir, History of Error in E0STKA52_C01 since 17:48 till now :- 1:- Load Oversize Error(Left) occured at 19:42. 2:- Load Oversize Error (Left) occured at 19:43:44. 3:-Fork #2 Sew Emergency Stop(Code 14) occured at 19:43:48. 4:-Fork #2 Sew Emergency Stop(Code 14) occured at 19:55. 5:-Travel Time Over Error occured at 20:17. 6:-Travel Time Over Error occured at 20:18. 7:-Load Oversize Error (Left) occured at 20:56. 8:-Load Oversize Error (Left) occured at 21:02. May 10, 2025 at 12:05 AM, Lee Junghan(이정한)_CS : Thanks May 10, 2025 at 12:07 AM, Lee Junghan(이정한)_CS : Was there a travel driver error? May 10, 2025 at 12:08 AM, Lee Junghan(이정한)_CS : this May 10, 2025 at 12:10 AM, Mohammad Amir : 9:-Fork #2 Sew Emergency Stop(Code 14) occured at 21:02. 10:-4:-Fork #2 Sew Emergency Stop(Code 14) occured at 21:10. 11:-Load Oversize Error(Left) occured at 22:54. 12:-Load Oversize Error(Left) occured at 22:56:13. 13:-Fork #2 Sew emergency stop(Code 14) at 22:56:13. 14:-Fork #2 Sew emergency stop(Code 14) at 23:00. 15:-Travel Time Over Error at 23:09. 16:-Travel Time Over Error at 23:14. 17:- Load oversize Error (Left) at 23:54. May 10, 2025 at 12:13 AM, Mohammad Amir : Sir, Sorry Sir,In E0STKA52_C01,,around 23:11 it was Travel time over error. Thank you very much! May 10, 2025 at 12:13 AM, Lee Junghan(이정한)_CS : FA TEAM currently is taking action on the equipment? May 10, 2025 at 12:14 AM, Lee Junghan(이정한)_CS : Ok thanks May 10, 2025 at 12:14 AM, Mohammad Amir : Sir, Error has been cleared. Thank you very much! May 10, 2025 at 12:15 AM, Mohammad Amir : This is the History of errors occured between 17:48 - 23:59:00. Feel free to contact me if you need any further information. Thank you very much! May 10, 2025 at 12:15 AM, Mohammad Amir : You are welcome Sir! May 10, 2025 at 12:15 AM, Lee Junghan(이정한)_CS : Our CS team is going to check it tomorrow morning. May 10, 2025 at 12:15 AM, Mohammad Amir : Okay Sir, Thank you very much 🙏. May 10, 2025 at 12:33 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 141 - Anode: 01 VD Pre STK > VD - Cathode: 00 - Anode: 74 VD Post STK > Stacking - Cathode: 42 - Anode: 152 GF NC reel Available lot - CA: 00 - AN: 185 Thank you very much! May 10, 2025 at 1:08 AM, Mohammad Amir : @Manufacturing Please make E0CNVA52_M07 to OUT type as one job is Alternated for quite a long time because of this issue. Thank you very much! May 10, 2025 at 1:28 AM, Mohammad Amir : @Manufacturing This issue is still exists, Please check! Thank you very much! May 10, 2025 at 1:45 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 140 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 76 VD Post STK > Stacking - Cathode: 33 - Anode: 159 GF NC reel Available lot - CA: 00 - AN: 255 Thank you very much! May 10, 2025 at 1:46 AM, Mohammad Amir : @Manufacturing This issue still exists, Please check! Thank you very much! May 10, 2025 at 2:08 AM, P.Bence A SSL invited Biletska Nataliia. May 10, 2025 at 2:37 AM, Nguyên : NC AN GF AGV#4 Error May 10, 2025 at 2:38 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 139 - Anode: 00 VD Pre STK > VD - Cathode: 02 - Anode: 77 VD Post STK > Stacking - Cathode: 33 - Anode: 156 GF NC reel Available lot - CA: 00 - AN: 245 Thank you very much! May 10, 2025 at 2:58 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Load Oversize Error (Left). Thank you very much! May 10, 2025 at 3:35 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 131 - Anode: 00 VD Pre STK > VD - Cathode: 02 - Anode: 84 VD Post STK > Stacking - Cathode: 40 - Anode: 156 GF NC reel Available lot - CA: 00 - AN: 245 Thank you very much! May 10, 2025 at 4:09 AM, Barta Rudi : @FA CA VD#39 machine stop, We will be replacing the heating element, so please send the magazine to the warehouse. Thank you. May 10, 2025 at 4:31 AM, P.Bence A SSL : @Mr.Miti (미티) FA küldj valakit kérlek May 10, 2025 at 4:41 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVC52_BP14/09-011 there is Data mismatch error and Data Loss error . Reels delivery has been affected. Thank you very much! May 10, 2025 at 4:44 AM, Mohammad Amir : Updated GF Next lot quantity available VD Pre STK > Notching - Cathode: 120 - Anode: 00 VD Pre STK > VD - Cathode: 01 - Anode: 70 VD Post STK > Stacking - Cathode: 54 - Anode: 175 GF NC reel Available lot - CA: 00 - AN: 225 Thank you very much! May 10, 2025 at 4:46 AM, Amgaa FA : solved May 10, 2025 at 4:54 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Load Oversize Error (Left). Thank you very much! May 10, 2025 at 5:02 AM, Nagy Tibor : solved May 10, 2025 at 5:02 AM, Mohammad Amir : Thank you very much! May 10, 2025 at 5:06 AM, Mohammad Amir : @Manufacturing This issue still exists, Please check! Thank you very much! May 10, 2025 at 5:16 AM, Nguyên : NC AN GF AGV#8 Error May 10, 2025 at 5:38 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA52_C01 there is Load Oversize Error (Left). Thank you very much! May 10, 2025 at 5:42 AM, Nagy Tibor : solved May 10, 2025 at 5:43 AM, Mohammad Amir : Thank you very much! May 10, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 7/12 Tech, 1Sl Overtime(0): Holiday(3): Pintye Miklós, Kovács Ágnes, Boromisza Zoltán Sick(2): Gerbovits Kevin, BöröczbTamás --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Csanálosi Gábor, Rácz Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(1): Denkó János --------------- The number of technicians is low. In all areas. May 10, 2025 at 6:10 AM, M.Ferenc "B"Nc/Vd SL : Good morning! Nc Ca Reel E0CNVC52 is for rent, it stopped during release. Please check. May 10, 2025 at 6:11 AM, Csanálosi Gábor FA : Úton vagyok May 10, 2025 at 6:21 AM, Csanálosi Gábor FA : Hiba nincs, csak nincs feladata a darunak. May 10, 2025 at 6:22 AM, Csanálosi Gábor FA : Az rtv-nek volt gondja, de az már kész May 10, 2025 at 6:23 AM, M.Ferenc "B"Nc/Vd SL : Köszönöm! May 10, 2025 at 6:30 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! GF Next lot quantity available VD Pre STK > Notching • Anode: 0 • Cathode: 110 VD Pre STK > VD • Anode: 47 • Cathode: 00 VD Post STK > Stacking • Anode: 197 • Cathode: 49 GF NC reel Available lot 4/5 line • AN: 231 • CA: 0 Thank you May 10, 2025 at 8:52 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 0 • Cathode: 109 VD Pre STK > VD • Anode: 39 • Cathode: 02 VD Post STK > Stacking • Anode: 206 • Cathode: 67 GF NC reel Available lot 4/5 line • AN: 238 • CA: 0 Thank you May 10, 2025 at 9:10 AM, KIM SEYEON [김세연]_FA : thank you for your hard work May 10, 2025 at 10:00 AM, Csanálosi Gábor FA : @M.Ferenc "B"Nc/Vd SL tudnál jönni kicsit An vd-re? 72 raktár May 10, 2025 at 10:01 AM, M.Ferenc "B"Nc/Vd SL : Megyek May 10, 2025 at 10:11 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 0 • Cathode: 107 VD Pre STK > VD • Anode: 39 • Cathode: 03 VD Post STK > Stacking • Anode: 204 • Cathode: 76 GF NC reel Available lot 4/5 line • AN: 234 • CA: 0 Thank you May 10, 2025 at 10:13 AM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. May 10, 2025 at 10:18 AM, Lan Nhi : @FA plz check for me agv 8 error on machine 5/3. thanks May 10, 2025 at 11:00 AM, Rácz Dániel / FA : GF Assy AN VD 6-10 AGV #9 Mind a két tálcát rosszul vette ki. Nem ült rá rendesen a tüskékre, kézzel megigazítva. May 10, 2025 at 11:25 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 0 • Cathode: 106 VD Pre STK > VD • Anode: 19 • Cathode: 02 VD Post STK > Stacking • Anode: 234 • Cathode: 74 GF NC reel Available lot 4/5 line • AN: 236 • CA: 03 Thank you May 10, 2025 at 12:33 PM, Lan Nhi : @FA plz check for me. agv in NC/ Gf. An all not working May 10, 2025 at 12:41 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 98 VD Pre STK > VD • Anode: 21 • Cathode: 00 VD Post STK > Stacking • Anode: 229 • Cathode: 69 GF NC reel Available lot 4/5 line • AN: 233 • CA: 12 Thank you May 10, 2025 at 1:35 PM, Betti B SL : L6 AVG#4 stopped with error May 10, 2025 at 2:50 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 106 VD Pre STK > VD • Anode: 08 • Cathode: 00 VD Post STK > Stacking • Anode: 221 • Cathode: 62 GF NC reel Available lot 4/5 line • AN: 240 • CA: 41 Thank you May 10, 2025 at 4:06 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 106 VD Pre STK > VD • Anode: 03 • Cathode: 02 VD Post STK > Stacking • Anode: 240 • Cathode: 63 GF NC reel Available lot 4/5 line • AN: 251 • CA: 52 Thank you May 10, 2025 at 5:37 PM, Yosyp Tovt : Hello 4 line STK. AGV stopped 10 May 10, 2025 at 5:39 PM, Betti B SL : #7 AGV el vitt egy telik Ca magazin platet amin a magazin tetők is rajta vannak OutP12 előtt hibával áll most May 10, 2025 at 5:39 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 100 VD Pre STK > VD • Anode: 02 • Cathode: 00 VD Post STK > Stacking • Anode: 263 • Cathode: 78 GF NC reel Available lot 4/5 line • AN: 246 • CA: 34 Thank you May 10, 2025 at 6:05 PM, Mohammad Amir : @FA Please check E0STKA51_C01 there is Port Interface Error. Thank you very much! May 10, 2025 at 6:07 PM, Mohammad Amir : @FA Please also check E0STKA52_C02 there Is Port interface Error as well. Thank you! May 10, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 10, 2025 at 6:09 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKC51_C01 there is Load Oversize error(Right) . Thank you very much! May 10, 2025 at 6:12 PM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKC71_C02 there is Load Oversize Error(Left). Thank you very much! May 10, 2025 at 6:28 PM, Nguyên : NC AN GF E0STKA51_C01 error Come check for me May 10, 2025 at 6:29 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 97 VD Pre STK > VD • Anode: 00 • Cathode: 00 VD Post STK > Stacking • Anode: 251 • Cathode: 69 GF NC reel Available lot 4/5 line • AN: 235 • CA: 37 Thank you very much! May 10, 2025 at 7:03 PM, Mohammad Amir : @FA Please check C1STKC71_C02 and P21 ,these are OOS that's why there is a queue of materials on the recovery CNV. Thank you very much! May 10, 2025 at 7:33 PM, Barta Rudi : Hello. Nc ca 5/2 agv9 stopped,please check @FA May 10, 2025 at 8:11 PM, KIM SEYEON [김세연]_FA : 05.10. Night shift 1F- Chinges Badmaa GF- Nandia Amgaa May 10, 2025 at 8:11 PM, KIM SEYEON [김세연]_FA : @Nandia FA @Amgaa FA please check this agv May 10, 2025 at 8:13 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKA52 _C02 there is Hoist First Movement Error. Thank you very much! May 10, 2025 at 8:24 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 102 VD Pre STK > VD • Anode: 07 • Cathode: 02 VD Post STK > Stacking • Anode: 235 • Cathode: 77 GF NC reel Available lot 4/5 line • AN: 221 • CA: 30 Thank you very much! May 10, 2025 at 9:08 PM, Nguyên : AN GF NC Come check for me AGV No take away May 10, 2025 at 9:16 PM, Amgaa FA : solved May 10, 2025 at 9:26 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 102 VD Pre STK > VD • Anode: 05 • Cathode: 00 VD Post STK > Stacking • Anode: 236 • Cathode: 66 GF NC reel Available lot 4/5 line • AN: 210 • CA: 40 Thank you very much! May 10, 2025 at 9:42 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVC52_RTV01 there is Run time Over Error and it is blocking CA reels delivery. Please check this issue on priority. Thank you very much! May 10, 2025 at 10:03 PM, Mohammad Amir : @FA Please check C1CNV072_16_079 there is Data mismatch error and it is blocking stacking materials delivery. Thank you very much! May 10, 2025 at 10:13 PM, Andrea Zentay : @Fa segítséget kérünk a NC CA 4/3- hoz. Lefutott egy szíj a feszítő görgőkről. Köszönjük. May 10, 2025 at 10:31 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 93 VD Pre STK > VD • Anode: 00 • Cathode: 03 VD Post STK > Stacking • Anode: 247 • Cathode: 73 GF NC reel Available lot 4/5 line • AN: 212 • CA: 47 Thank you very much! May 10, 2025 at 10:47 PM, Mohammad Amir : @Amgaa FA Please check MLA6060 located at C1CNV072_16_077 it is not moving and blocking the stacking materials delivery. Everything is good from MCS RTD side. ✅ Please check physically on priority as there is shortages of stacking materials on line -4&5. Thank you very much! May 10, 2025 at 10:49 PM, Mohammad Amir : @Nagy Tibor @Vékony Ferenc Please check C1STKC71_P16/15 there is Data mismatch error. Thank you very much! May 10, 2025 at 10:52 PM, 인제(Hwang) : NC Ca Robot#3 Error May 10, 2025 at 10:57 PM, Andrea Zentay : Alarm message: Robot Operation MGZ Detect Sensor Error @FA please help me May 10, 2025 at 11:34 PM, Elena Dzhul : @FA AGV9 stopped near ST/6L, machine 03 ,please check. Thanks! May 10, 2025 at 11:37 PM, Mohammad Amir : @FA @Imre Please check E0CNVC52_RTV01 there is Data Loss error and it is blocking CA reels delivery. Please check this issue on priority. Thank you very much! May 10, 2025 at 11:52 PM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 87 VD Pre STK > VD • Anode: 02 • Cathode: 03 VD Post STK > Stacking • Anode: 251 • Cathode: 80 GF NC reel Available lot 4/5 line • AN: 183 • CA: 50 Thank you very much! May 11, 2025 at 12:06 AM May 11, 2025 at 12:06 AM, Mohammad Amir : @Imre @FA Please check C1STKA72 _P21 it is OOS and because of this one job is pending. Thank you very much! May 11, 2025 at 12:07 AM, Mohammad Amir : @FA @Novák Károly F. A. Please also check C1CNV072_16154 there is Data Loss error and it is blocking stacking materials delivery. Thank you very much! May 11, 2025 at 12:09 AM, Nguyên : AN GF NC 5/2 AGV Do not insert MGZ tray Come check for me May 11, 2025 at 12:20 AM, Mohammad Amir : @Imre @FA Please check E0STKA52_C01 there is Load Oversize error(Left) . Thank you very much! May 11, 2025 at 12:27 AM, Nguyên : AN GF NC. Come check for me Why is the empty MGZ tray not fed to the 5/2 machine? May 11, 2025 at 12:28 AM, Mohammad Amir : Checking May 11, 2025 at 12:32 AM, Mohammad Amir : Issue has been resolved ✅. Could you please press LR again. Thank you very much! May 11, 2025 at 12:36 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC71_C01 there is Travel First Movement Error. Thank you very much! May 11, 2025 at 12:39 AM, 인제(Hwang) : Please check LR May 11, 2025 at 12:39 AM, Mohammad Amir : We did not receive any new LR. Could you please try again. Thank you very much! May 11, 2025 at 1:08 AM, 안종수 : VD AN #1 AGV ERROR. Please check. May 11, 2025 at 1:10 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 91 VD Pre STK > VD • Anode: 03 • Cathode: 02 VD Post STK > Stacking • Anode: 242 • Cathode: 66 GF NC reel Available lot 4/5 line • AN: 193 • CA: 55 Thank you very much! May 11, 2025 at 1:18 AM, 안종수 : Please come to an 5-2 @Nguyên May 11, 2025 at 1:19 AM, 인제(Hwang) : NC Ca Robot#3 Error May 11, 2025 at 1:24 AM, 전 운 (Jeon Woon) : Please come to ST 6-20 @Eduard SL Shift A May 11, 2025 at 1:26 AM, Mohammad Amir : Dear Sir @이주봉PM LEE JUBONG(FA) Job has been Created successfully for 5-2 NC AN. ✅ Empty magazine on the way. I am monitoring. Thank you very much! May 11, 2025 at 1:27 AM, Mohammad Amir : @인제(Hwang) for you information. Thank you very much! May 11, 2025 at 1:36 AM, 인제(Hwang) : NC Ca Robot#2 Error May 11, 2025 at 1:37 AM, Mohammad Amir : @FA Please check C1STKA71_C01/C02 there is Light curtain error Thank you very much! May 11, 2025 at 1:41 AM, 안종수 : NC AN #8 AGV ERROR. Please check. @FA May 11, 2025 at 2:17 AM, Mohammad Amir : @FA Please check this issue still exists. Job for MLA0142 is pending for long time because of this issue. Thank you very much! May 11, 2025 at 3:05 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 89 VD Pre STK > VD • Anode: 00 • Cathode: 03 VD Post STK > Stacking • Anode: 251 • Cathode: 72 GF NC reel Available lot 4/5 line • AN: 158 • CA: 86 Thank you very much! May 11, 2025 at 3:20 AM, Mohammad Amir : @FA @Amgaa FA Please check C1CNV072_16_095 there is Data mismatch error and it is blocking stacking materials delivery. Thank you very much! May 11, 2025 at 3:59 AM, P.Bence A SSL invited Spilka Sofia. May 11, 2025 at 4:10 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 82 VD Pre STK > VD • Anode: 00 • Cathode: 03 VD Post STK > Stacking • Anode: 259 • Cathode: 79 GF NC reel Available lot 4/5 line • AN: 155 • CA: 84 Thank you very much! May 11, 2025 at 4:31 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please check this issue still exists. Job for MLA0142 is pending for long time because of this issue. Thank you very much! May 11, 2025 at 4:53 AM, Mohammad Amir : @Imre @FA Please check E0STKA52_C01 there is Load Oversize error(Left) . Thank you very much! May 11, 2025 at 5:14 AM, Mohammad Amir : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 81 VD Pre STK > VD • Anode: 03 • Cathode: 01 VD Post STK > Stacking • Anode: 270 • Cathode: 78 GF NC reel Available lot 4/5 line • AN: 154 • CA: 90 Thank you very much! May 11, 2025 at 5:16 AM, Elena Dzhul : @FA AGV6 stopped near ST/4L, machine 09 ,please check. Thanks! May 11, 2025 at 6:08 AM, Shahbaz 샤바즈 MCS/RTD : @FA Good morning! Please check Cathode reel RTV C52, it’s not transferring reel trays. Thank you. May 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! "B" műszak, 9/12+1+1 Tech, 1Sl Overtime(0): Holiday(2): Kovács Ágnes, 방혁_이반차 Sick(1): Gerbovits Kevin Shift Change(1): Böröczki Balázs --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- A technikusok elosztása változhat az elvégzendő feladatok May 11, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.11 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 11, 2025 at 6:26 AM, M.Ferenc "B"Nc/Vd SL : @FA Jó reggelt! NC CA E0CNV52_M05 porton nem megy vissza az üres reel carrier.(LTC0893) Nézzétek megy légyszi! May 11, 2025 at 6:51 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKA72 _P21 it is OOS and because of this job for MLA0142 is pending. Thank you! May 11, 2025 at 6:54 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 81 VD Pre STK > VD • Anode: 00 • Cathode: 02 VD Post STK > Stacking • Anode: 250 • Cathode: 82 GF NC reel Available lot 4/5 line • AN: 152 • CA: 88 Thank you very much! May 11, 2025 at 8:28 AM, Truong : This message was deleted. May 11, 2025 at 8:31 AM, Shahbaz 샤바즈 MCS/RTD : @GA Please check AN reel stk A51 “MCp Ap error” Thank you May 11, 2025 at 8:42 AM, 심재훈 : No empty magazine for line 4-1 notching May 11, 2025 at 8:43 AM, 심재훈 : Machine is stopped May 11, 2025 at 8:43 AM, 심재훈 : Anode May 11, 2025 at 8:43 AM, 심재훈 : 4-2 is stopped too May 11, 2025 at 8:43 AM, 심재훈 : 5-3 is stopped May 11, 2025 at 8:44 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 78 VD Pre STK > VD • Anode: 01 • Cathode: 02 VD Post STK > Stacking • Anode: 275 • Cathode: 97 GF NC reel Available lot 4/5 line • AN: 141 • CA: 66 Thank you very much! May 11, 2025 at 8:44 AM, 심재훈 : 6-1 is stopped May 11, 2025 at 8:45 AM, 심재훈 : 4 machines are stopped due to the lack of empty magazine transer for anode notching May 11, 2025 at 8:46 AM, 심재훈 : 노칭 호기 9개 중 4개가 공메거진 없어서 섰는데, 왜 현장 대응 인력이 아무도 없나요. ? 오늘은 인력이 없는 날 인가요? May 11, 2025 at 8:50 AM, Böröcz Tamás : @심재훈 May 11, 2025 at 8:52 AM, KIM SEYEON [김세연]_FA : @이민재 주임님 현장서 상황 확인 부탁드립니다. May 11, 2025 at 8:53 AM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check agv errors immediately May 11, 2025 at 8:53 AM, 이민재 : 음극 말씀하시는건가요? May 11, 2025 at 8:55 AM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 위의 자재 현황보면 공매거진이 실제로 없습니다 May 11, 2025 at 8:55 AM, 이민재 : 후공정 잘 돌지 않아 빈매거진이 없는걸로 알고있습니다 May 11, 2025 at 8:55 AM, KIM SEYEON [김세연]_FA : 에러가 있는지만 확인 부탁드립니다. May 11, 2025 at 8:56 AM, 이민재 : 알겠습니다. May 11, 2025 at 8:56 AM, KIM SEYEON [김세연]_FA : 음극 후창고 스택에 275플레이트가 있어서 그런것 같고, 스택에서 회수되면 아마 나올겁니다. May 11, 2025 at 8:57 AM, 심재훈 : 네 공매거진 찾아서 최대한 넣겠습니다 May 11, 2025 at 9:08 AM, 심재훈 : 저희 반송 불가능 자재들 원인 파악 가능할까요? 고여있는 메거진이요 May 11, 2025 at 9:10 AM, KIM SEYEON [김세연]_FA : 저희는 컨베이어에서 걸리거나, 다관절로봇에서 문제가 있거나, 바코드 이상있음 제조에 인계합니다. 바코드 괜찮은지? 그리고 조립상태가 괜찮은지? 테크니션이 봐주시고 투입해주시면 될것 같습니다. May 11, 2025 at 9:11 AM, 심재훈 : 창고안에서 몇일 이상 순환이 안되는 것들을 관리 안하신다는 거죠? May 11, 2025 at 9:12 AM, KIM SEYEON [김세연]_FA : VD창고 SCS에서 보이는 NG자재들 말씀하시는건가요? May 11, 2025 at 9:13 AM, 심재훈 : 해당 자재가 NG로 표시되는지는 잘 모르겠습니다. 다만 반송가능 자재와, 실제 창고에 있는 수량이 다른 것을 확인했소 May 11, 2025 at 9:13 AM, 심재훈 : 몇일씩 방치 중인 것 같아서요 May 11, 2025 at 9:14 AM, KIM SEYEON [김세연]_FA : VD후창고에서 스택으로 나가는 자재 말씀이시죠? May 11, 2025 at 9:14 AM, 심재훈 : 네 May 11, 2025 at 9:14 AM, KIM SEYEON [김세연]_FA : 이력 확인해보고 메일로 전달드리겠습니다. May 11, 2025 at 9:15 AM, 심재훈 : 감사합니다. 해당 건 주기적으로 관리하는 주체가 필요 할 것 같습니다. May 11, 2025 at 9:28 AM, Dariimaa/다리마/Ivancsa invited Natsag/ Ivansca FA. May 11, 2025 at 9:30 AM, Dariimaa/다리마/Ivancsa invited Tuya Ivancsa FA. May 11, 2025 at 10:05 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 75 VD Pre STK > VD • Anode: 02 • Cathode: 00 VD Post STK > Stacking • Anode: 288 • Cathode: 98 GF NC reel Available lot 4/5 line • AN: 134 • CA: 75 Thank you very much! May 11, 2025 at 11:41 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check Ca reel conveyor C52, “Data loss error “ Thank you May 11, 2025 at 11:49 AM, Csanálosi Gábor FA : Done May 11, 2025 at 12:36 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 73 VD Pre STK > VD • Anode: 01 • Cathode: 03 VD Post STK > Stacking • Anode: 263 • Cathode: 97 GF NC reel Available lot 4/5 line • AN: 168 • CA: 90 Thank you very much! May 11, 2025 at 12:36 PM, Dariimaa/다리마/Ivancsa : @FA tech NC CA robot#2 error please check. Thank you! May 11, 2025 at 1:55 PM, Betti B SL : The AGV does not bring magazines to the inside of row L6 and does not take away empty ones. May 11, 2025 at 1:57 PM, Shahbaz 샤바즈 MCS/RTD : Stacking 6 line? May 11, 2025 at 1:57 PM, Betti B SL : Yes May 11, 2025 at 2:06 PM, Shahbaz 샤바즈 MCS/RTD : Currently, there are a lot of tasks for Lines 4, 5, and 6, so it’s taking some time. AGV#05 and AGV#10 are on the way to Line 6 with full plates. Also, an AGV will be assigned to take the empty plates one by one. Thank you. May 11, 2025 at 2:10 PM, Betti B SL : okay. thank you very much May 11, 2025 at 2:14 PM, Shahbaz 샤바즈 MCS/RTD : You’re welcome! May 11, 2025 at 2:52 PM, M.Ferenc "B"Nc/Vd SL : @FA @MCS VD AN #46(6-1) AGV did not transfer the magazines from the chamber to warehouse 72. Please check. May 11, 2025 at 2:53 PM, Shahbaz 샤바즈 MCS/RTD : There is already a transfer command and waiting for AGVs. May 11, 2025 at 3:38 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 78 VD Pre STK > VD • Anode: 00 • Cathode: 02 VD Post STK > Stacking • Anode: 262 • Cathode: 103 GF NC reel Available lot 4/5 line • AN: 196 • CA: 59 Thank you very much! May 11, 2025 at 3:52 PM, Betti B SL : This message was deleted. May 11, 2025 at 3:53 PM, Betti B SL : There are very few Anode and Cathode magazines on the inside of L6 ST, AGVs do not come and take away empty magazines at all. May 11, 2025 at 4:01 PM, Shahbaz 샤바즈 MCS/RTD : @FA @ACS There are a lot of pending jobs from the stacking side of Line 6. Please confirm whether the AGVs are working normally. Thank you very much! May 11, 2025 at 4:01 PM, Debreczeni Ármin : UR requests waiting for a long time ago May 11, 2025 at 4:03 PM, Dariimaa/다리마/Ivancsa : Yes. The AGV is working normally. All AGVs are currently busy. May 11, 2025 at 4:03 PM, Shahbaz 샤바즈 MCS/RTD : Okay, thank you for the confirmation. May 11, 2025 at 5:18 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available VD Pre STK > Notching • Anode: 00 • Cathode: 84 VD Pre STK > VD • Anode: 04 • Cathode: 00 VD Post STK > Stacking • Anode: 268 • Cathode: 112 GF NC reel Available lot 4/5 line • AN: 189 • CA: 64 Thank you very much! May 11, 2025 at 5:21 PM, Debreczeni Ármin : @Shahbaz 샤바즈 MCS/RTD please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate Thank you @Yosyp Tovt @Kristina May 11, 2025 at 5:29 PM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for the requested plates. Thank you!! May 11, 2025 at 5:57 PM, Elena Dzhul : @FA Hello! AGV10 stopped near ST/4L, machine 16 ,please check. Thanks! May 11, 2025 at 6:18 PM, Andrea Zentay : Sziasztok, Beborult egy magazin a NC CA 4/3-nál. Legyetek kedvesek segíteni a hibaelhárításban. @FA Köszönjük May 11, 2025 at 6:41 PM, 이주봉PM LEE JUBONG(FA) : Day shift FA Schedule Date: 2025.05.11 Time:18:00~06:00 1. LEEJUBONG 이주봉PM 2.Samkoo 최명운 3.Samkoo 김정희 May 11, 2025 at 6:46 PM, VK (mcs) : @FA Please check Cathode Reel STK C51 Buffer port 3 & 4 (60015)(60013) LTC0985 and LTC0183 They are not transferred. Destination is STK C52. May 11, 2025 at 7:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 89 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 247 • Cathode: 92 GF NC reel Available lot 4/5 line • AN: 177 • CA: 58 May 11, 2025 at 8:15 PM, VK (mcs) : @FA Carriers are still in buffer ports Can you check it. Thx May 11, 2025 at 8:25 PM, 김희용 : @이주봉PM LEE JUBONG(FA) 피엠님 E0STKC51의 60013, 60015에서 E0STKC52 쪽으로 안넘어가고있는게 확인좀 가능하실까요? May 11, 2025 at 8:28 PM, 이주봉PM LEE JUBONG(FA) : 저지금 May 11, 2025 at 8:28 PM, 이주봉PM LEE JUBONG(FA) : 코터 대응때문에 May 11, 2025 at 8:28 PM, KIM SEYEON [김세연]_FA : @Nagy Tibor and FA technicians please check reel stk c 51 buffer port 3 and 4 May 11, 2025 at 8:30 PM, KIM SEYEON [김세연]_FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 9 Technician (7+2 overtime) 0 SL ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám Gutenkunst Ábel Zoltán ———————————— Assembly(5): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 11, 2025 at 8:31 PM, KIM SEYEON [김세연]_FA : @FA Technicians who can check this error? ———————————— Assembly(5): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— May 11, 2025 at 8:31 PM, 이주봉PM LEE JUBONG(FA) : Job을 지웠는데요? May 11, 2025 at 8:31 PM, 이주봉PM LEE JUBONG(FA) : @김희용 이따가 제가 처리할게요 May 11, 2025 at 8:32 PM, 김희용 : 예 알겠습니다 피엠님! May 11, 2025 at 8:34 PM, Elena Dzhul : @Mohammad Amir Hello!Please send CA stack materials to c1stkc72 m01 port. Need amount : 6 plate Thank you ! May 11, 2025 at 8:39 PM, VK (mcs) : Materials have been released. May 11, 2025 at 9:01 PM, 이주봉PM LEE JUBONG(FA) : 조치했습니다 52번창고로 보냈어요 May 11, 2025 at 9:03 PM, 이주봉PM LEE JUBONG(FA) : 원인은 크레인이 화물 내려놓고 reel tray 감지센서 미감지 오전 11시 46 분에 발생했고 여기서 조치를 트렌스펄 잡을 삭제했네요. ㄴ조치를 잘못한겁니다. May 11, 2025 at 9:08 PM, VK (mcs) : @FA Please check Anode Reel STK A52 port 2(6084)(6083) It is in manual mode. Thx May 11, 2025 at 9:08 PM, 김희용 : 확인감사합니다! May 11, 2025 at 9:19 PM, VK (mcs) : @FA Please check Anode Reel STK A52 port 2(6083) Homestand FWD cylinder error. May 11, 2025 at 9:31 PM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC52 -M09 (9036) LTC1025 doesn't transfer for a while. May 11, 2025 at 9:37 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 89 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 245 • Cathode: 84 GF NC reel Available lot 4/5 line • AN: 177 • CA: 37 May 11, 2025 at 9:47 PM, Nguyên : NC AN GF AGV#9 Error May 11, 2025 at 10:37 PM, Nguyên : VD AN GF AGV#10 Error May 11, 2025 at 10:47 PM, VK (mcs) : @FA Please check Circular logistic conveyor C1CNV072 (16121) MLA6153 doesn't transfer. job terminated by OP action. Destination was STK May 11, 2025 at 11:30 PM, Elena Dzhul : @VK (mcs) please send CA stack materials to c1stkc72 m01 port. Need amount : 5 plate send AN stack materials to c1stka72 m01 port Need amount : 5 plate Thanks! May 11, 2025 at 11:32 PM, Nguyên : C1STKA71-C01 C1STKA71-C02 Error Come check for me May 11, 2025 at 11:38 PM, VK (mcs) : Materials have been released. May 12, 2025 at 12:04 AM May 12, 2025 at 12:04 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 83 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 241 • Cathode: 83 GF NC reel Available lot 4/5 line • AN: 169 • CA: 30 May 12, 2025 at 12:10 AM, VK (mcs) : @FA Please check it. Problem still not solved. Thx May 12, 2025 at 12:23 AM, N.Zoli F.A. : New transfer job solved the problem May 12, 2025 at 12:43 AM, KIM SEYEON [김세연]_FA : please check availabe lot May 12, 2025 at 12:45 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 78 Pre STK > VD • Anode: 07 • Cathode: 00 Post STK > Stacking • Anode: 237 • Cathode: 78 GF NC reel Available lot 4/5 line • AN: 170 • CA: 30 May 12, 2025 at 2:08 AM, Nguyên : VD AN GF AGV#8 Error May 12, 2025 at 2:13 AM, P.Bence A SSL : L6 stacking agv4 stop please check thank you ! May 12, 2025 at 3:07 AM, VK (mcs) : @FA Please check Anode Reel STK A52 Load oversize error! May 12, 2025 at 3:30 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 78 Pre STK > VD • Anode: 20 • Cathode: 01 Post STK > Stacking • Anode: 238 • Cathode: 89 GF NC reel Available lot 4/5 line • AN: 157 • CA: 20 May 12, 2025 at 4:00 AM, Elena Dzhul : @VK (mcs) please send CA stack materials to c1stkc72 m01 port. Need amount : 5 plate psend AN stack materials to c1stka72 m01 port Need amount : 5 plate Thanks! May 12, 2025 at 4:07 AM, VK (mcs) : Materials have been released. May 12, 2025 at 4:54 AM, Elena Dzhul : @FA AGV10 stopped near ST/4L, machine 16 ,please check. Thanks! May 12, 2025 at 5:27 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 82 Pre STK > VD • Anode: 19 • Cathode: 03 Post STK > Stacking • Anode: 231 • Cathode: 94 GF NC reel Available lot 4/5 line • AN: 162 • CA: 37 May 12, 2025 at 5:58 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Iváncsa "C" shift (06:00-18:00) 12 Tech, 0 SL Beteg(sick): 1 Sarvajz Ferenc Szabadság(Holisay): 1, Farkas Tamás(SL) Helyettesít(Substitution): 2, Szücs Géza Imre(SL), Boromisza Zoltán Túlóra(Overtime): 0 ———————————— Electrode (4) Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila ———————————— Assembly 1F(3) Csuti Zoli Gégény Dávid Fabricius Gergő ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Döme György Haraszt May 12, 2025 at 6:07 AM, duzzaman Md (MCS) : @FA Good morning. Please check C1STKA71_C01 Travel first movement error. Thank you! May 12, 2025 at 6:16 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.12 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 12, 2025 at 6:28 AM, QuangPhan : Hello! Good morning @FA NC AN AGV #10 error. Thanks May 12, 2025 at 7:02 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 85 Pre STK > VD • Anode: 19 • Cathode: 01 Post STK > Stacking • Anode: 232 • Cathode: 69 GF NC reel Available lot 4/5 line • AN: 181 • CA: 15 May 12, 2025 at 7:52 AM, T. Gàbornè C SL NC : @FA Please check VD CA 6-08 not unloaded all plates in the AGV from the oven. Thx May 12, 2025 at 8:03 AM, QuangPhan : Hello! Good morning! @FA @AGV . Currently VD 5-7 #43 has 3 full plates. Could you please use AGV to add 1 full plate. Thanks May 12, 2025 at 8:04 AM, Kertész Dániel : This message was deleted. May 12, 2025 at 8:05 AM, Sazzad Bhai SKon : Please transfer by AGV manual command May 12, 2025 at 8:06 AM, T. Gàbornè C SL NC : @Fa Please check VD CA AGV#5, machine stop Thx May 12, 2025 at 8:13 AM, QuangPhan : Done May 12, 2025 at 8:16 AM, Sazzad Bhai SKon : In this case please transfer the odd number chambers manually. (Example: if there is plates on P01, P02, P03, in this case transfer only from P03) May 12, 2025 at 8:17 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 86 Pre STK > VD • Anode: 14 • Cathode: 00 Post STK > Stacking • Anode: 232 • Cathode: 91 GF NC reel Available lot 4/5 line • AN: 186 • CA: 26 May 12, 2025 at 8:18 AM, duzzaman Md (MCS) : @FA Kindly check C1CNV072_P15 INV 02 RUN TIME OVER ERROR May 12, 2025 at 8:20 AM, QuangPhan : Thank you so much. May 12, 2025 at 8:45 AM, QuangPhan : Dear @Fa AN VD 5-6 #42 stopped temperature overheat Please send mgz warehouse, the technicians repair machine start. Thank you. May 12, 2025 at 8:59 AM, Sazzad Bhai SKon : @FA @Kertész Dániel Good morning. Magazine MC5174 is suspected to be duplicated in the following plates. Plate1: MLC2209 (C1STKC72, 0100101) Plate2: MLC2040 (C1STKC72, 0105703) Please check the magazine from manual port. Thank you May 12, 2025 at 9:11 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. Plate1: UNKDUP-MLC4187 (C1STKC71, 0100303) Plate2: UNKDUP-MLC4188 (C1STKC71, 0205103) May 12, 2025 at 9:13 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1CNV072_P27/P28 Light curtain 01 error exists for a while Thank you May 12, 2025 at 9:23 AM, 최정한.KOVA : VD AN 5-6 점검중입니다. AGV 잡 취소해주세요. May 12, 2025 at 9:26 AM, 최정한.KOVA : VD AN 5-6 앞에 AGV 로딩하러 와있습니다. 잡취소하고 반송해주세요 May 12, 2025 at 9:38 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 84 Pre STK > VD • Anode: 04 • Cathode: 01 Post STK > Stacking • Anode: 245 • Cathode: 96 GF NC reel Available lot 4/5 line • AN: 186 • CA: 34 May 12, 2025 at 9:55 AM, 김희용 : @정다은 @심재훈 GF 음극 VD 5-6쪽에 냉각수가 샌것인지 확실하지는 않은데 지금 바닥에 물천지입니다.. 참고부탁드려요 May 12, 2025 at 10:03 AM, 이민재 : VD 챔버 업체 점검중 냉각수 관에 남아있던 냉각수 쏟아져서 청소 중입니다 May 12, 2025 at 10:33 AM, 하연철(HA YEONCHEOL)/ : 냉각수 청소 종료 되었습니다. May 12, 2025 at 10:34 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV01 It's OOS thank you May 12, 2025 at 10:37 AM, Yaroslav SL/C 6 line : Hello everyone @fa AGV4 stopped near 6 line ST 11. Please check. Thanks May 12, 2025 at 10:42 AM, duzzaman Md (MCS) : @FA @Nagy Tamás FA @Lajos Gábor F.A. E0stkc52_c01 Hoist time over error Thank you May 12, 2025 at 10:43 AM, duzzaman Md (MCS) : E0STKA52_P02 DATA MISSMATCH ERROR Same STK, Crane 01, Load oversize error . Kindly check. May 12, 2025 at 11:06 AM, 최정한.KOVA : VD AN 5-3 P01, P02 AGV 수동반송 후 다시 LR올리겠습니다. May 12, 2025 at 11:25 AM, 최정한.KOVA : VD AN 5-3 P01,P02 AGV 수동반출했는데 AGV2호기가 반송하러 왔습니다. May 12, 2025 at 11:26 AM, 최정한.KOVA : VD AN 5-3 LR 살아있는지 확인해주세요 May 12, 2025 at 11:27 AM, QuangPhan : Hello! @FA Could you please transfer the Upper-Left plate in VD AN 5/7 #43 to KA72. The chamber is missing 1 plate. Thank you. May 12, 2025 at 11:28 AM, Sazzad Bhai SKon : No LR May 12, 2025 at 11:29 AM, Sazzad Bhai SKon : Last LR was 11.21. job on the way May 12, 2025 at 11:29 AM, 최정한.KOVA : 다시 VD AN 5-3 LR 올리겠습니다 May 12, 2025 at 11:30 AM, Sazzad Bhai SKon : Jobs on the way, no need for LR again May 12, 2025 at 11:31 AM, Sazzad Bhai SKon : AGV was in alarm : Fork1 LD fail. So job is delaying May 12, 2025 at 11:31 AM, duzzaman Md (MCS) : @FA Kindly check C1CNV072 P24/27/28/31/32 LIGHT CURTAIN ERROR THANKS May 12, 2025 at 11:32 AM, Kertész Dániel : Korean technicians are working there May 12, 2025 at 11:35 AM, 정다은 invited 전다희 / DAHUI JEON. May 12, 2025 at 11:36 AM, 전다희 / DAHUI JEON invited 김종현. May 12, 2025 at 11:56 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 78 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 252 • Cathode: 104 GF NC reel Available lot 4/5 line • AN: 184 • CA: 40 May 12, 2025 at 11:56 AM, 최정한.KOVA : VD AN 5-6 오프라인 가동하겠습니다. May 12, 2025 at 12:08 PM, Yon Ko/연커/ : @MCS Hello Please cancel the job for VD CA AGV5. Chamber 5-3 is closed. May 12, 2025 at 12:10 PM, duzzaman Md (MCS) : Done. Thank you May 12, 2025 at 1:22 PM, duzzaman Md (MCS) : This message was deleted. May 12, 2025 at 1:23 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 65 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 252 • Cathode: 97 GF NC reel Available lot 4/5 line • AN: 196 • CA: 52 May 12, 2025 at 1:47 PM, duzzaman Md (MCS) : Hi Daniel, Just wanted to confirm if Korean technicians are still working there? Thank you May 12, 2025 at 1:47 PM, Kertész Dániel : Yes, they are still there! May 12, 2025 at 1:52 PM, 하연철(HA YEONCHEOL)/ : @FA NC CA #5 AGV Check plz May 12, 2025 at 2:18 PM, T. Gàbornè C SL NC : @FA Kérlek nézzétek meg CA 4#1 #2 miért nem jönnek üres mgz-ok. Köszönöm szépen May 12, 2025 at 2:19 PM, Kertész Dániel : @duzzaman Md (MCS) Please check this May 12, 2025 at 2:22 PM, Dima Kusyk : @fa AGV stopped near warehouse STK. please check May 12, 2025 at 2:24 PM, duzzaman Md (MCS) : AGV 01 is on the way to C4NCC010_P03 May 12, 2025 at 2:27 PM, duzzaman Md (MCS) : For CA 4#2, job has also been created which is transferring with carrier MC1502 May 12, 2025 at 2:39 PM, T. Gàbornè C SL NC : @Fa Please check CA 6#1 the full mgz wait the AGV. Thx May 12, 2025 at 2:47 PM, duzzaman Md (MCS) : Dear @FA, @Manufacturing Could you help providing info on carrier MLA4228 As we see the Job was aborted by operator at 11:28 It was on AGV 01 that time The last location was C5VDA030_P01 Please let us know the latest location of this carrier. Thank you May 12, 2025 at 2:49 PM, 하연철(HA YEONCHEOL)/ : @FA Nc Ca all agv stop check it May 12, 2025 at 2:49 PM, T. Gàbornè C SL NC : Please come @Fa technicians CA NC. Thx May 12, 2025 at 2:50 PM, Kertész Dániel : Done May 12, 2025 at 2:58 PM, Szücs Géza FT-B : QN Reel raktár "elesett" May 12, 2025 at 2:58 PM, Szücs Géza FT-B : AN May 12, 2025 at 3:19 PM, 하연철(HA YEONCHEOL)/ : @FA Nc Na all agv stop..... May 12, 2025 at 3:58 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 53 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 257 • Cathode: 110 GF NC reel Available lot 4/5 line • AN: 180 • CA: 37 May 12, 2025 at 5:24 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 41 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 264 • Cathode: 122 GF NC reel Available lot 4/5 line • AN: 171 • CA: 50 May 12, 2025 at 5:29 PM, duzzaman Md (MCS) : @fA Kindly check C1STKA71_C02 Load oversize error Thank you May 12, 2025 at 5:51 PM, Yaroslav SL/C 6 line : @fa AGV9 stopped with half out fork near 6 line ST 15. Please check May 12, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 +2 Overtime Overtime (2):Csanálosi Gábor, Denkó János Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 12, 2025 at 6:09 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 12 Time: 18:00~06:00 1. Jeong Woo-jun May 12, 2025 at 6:39 PM, 이도형 (Lee) : @FA NC An #10 AGV Check plz May 12, 2025 at 6:43 PM, VK (mcs) : @FA @ACS Please send carriers in the anode Pre-STK A71 ports 16&17 (6004)(6005) to the Post STK. thx May 12, 2025 at 7:10 PM, VK (mcs) : @FA Please check this problem. Carriers terminated by OPs action and now blocked transfers. Also please transfer MLA1197 to anode Post-STK. thx May 12, 2025 at 7:34 PM, 이도형 (Lee) : @FA VD Ca #7 AGV Check plz May 12, 2025 at 7:39 PM, Khaliun/Ivancsa FA : Solved May 12, 2025 at 8:08 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 42 Pre STK > VD • Anode: 04 • Cathode: 02 Post STK > Stacking • Anode: 256 • Cathode: 122 GF NC reel Available lot 4/5 line • AN: 163 • CA: 84 May 12, 2025 at 8:45 PM, 이도형 (Lee) : @FA NC An #10 AGV Check plz May 12, 2025 at 10:20 PM, Ivan Chobitko : @FA please check AGV 10 stuck near L6 ST8 May 12, 2025 at 10:31 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 40 Pre STK > VD • Anode: 07 • Cathode: 01 Post STK > Stacking • Anode: 255 • Cathode: 143 GF NC reel Available lot 4/5 line • AN: 158 • CA: 106 May 13, 2025 at 1:14 AM May 13, 2025 at 1:14 AM, N.Zoli F.A. : @VK (mcs) Hello We need new material for assy Gf ca vd C5VDC010 P03/P04 port. Thank you in advance! AGV 9 cannot unload into the 5-1 chamber, AGV is bad teach (node 168) May 13, 2025 at 1:17 AM, VK (mcs) : Please send remaining carriers in ports 1 & 2 to the Post-STK and again apply LR . Thx May 13, 2025 at 1:19 AM, N.Zoli F.A. : Done May 13, 2025 at 1:56 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 39 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 267 • Cathode: 151 GF NC reel Available lot 4/5 line • AN: 179 • CA: 125 May 13, 2025 at 2:48 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16094)(16092) Run time over! May 13, 2025 at 2:52 AM, Zaya/ivancsa FA : Solved May 13, 2025 at 4:10 AM, Farkas Bence : This message was deleted. May 13, 2025 at 4:59 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 39 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 282 • Cathode: 141 GF NC reel Available lot 4/5 line • AN: 219 • CA: 159 May 13, 2025 at 5:16 AM, Karina invited Diana Erdeli. May 13, 2025 at 6:12 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.13 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 13, 2025 at 6:14 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.13 FA Iváncsa "C" shift (06:00-18:00) 14 Tech, 1 SL Beteg(sick): 1, Sarvajz Ferenc Szabadság(Holisay): 2, Farkas Tamás(SL), Fabriczius Gergely Helyettesít(Substitution): 2, Böröcz Tamás, Pálosi Róbert, Szücs Géza Imre(SL) Túlóra(Overtime): 1, Édl Tamás --- Electrode (5) --- Marsi Gábor Viczai Tamás Skwarek Tibi Simon Attila Pálosi Róbert --- Assembly 1F(3) --- Csuti Zoli Gégény Dávid Böröcz Tamás ---Assembly GF(3) --- Kertész Dániel Lajos Gábor Nagy Tamás --- May 13, 2025 at 7:08 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 43 Pre STK > VD • Anode: 04 • Cathode: 03 Post STK > Stacking • Anode: 271 • Cathode: 131 GF NC reel Available lot 4/5 line • AN: 229 • CA: 147 May 13, 2025 at 7:46 AM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing Can you please LR again for VD CA 5-1 half chamber. Thank you. May 13, 2025 at 8:19 AM, Sazzad Bhai SKon : GF Next lot quantity available Pre STK > Notching • Anode: 2 • Cathode: 36 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 266 • Cathode: 127 GF NC reel Available lot 4/5 line • AN: 225 • CA: 143 May 13, 2025 at 8:24 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. Plate1: UNKDUP-MLC4187 (C1STKC72, 0105802) Plate2: UNKDUP-MLC4188 (C1STKC71, 0205103) Plate3: UNKDUP-MLC3080 (C1STKC72, 0200101) May 13, 2025 at 8:29 AM, Sazzad Bhai SKon : @FA @Szücs Géza FT-B Good morning. Magazine MC5174 is suspected to be duplicated in the following plates. Plate1: MLC2209 (this has been removed from C1STKC72_M01) Plate2: MLC2040 (C1STKC72, 0105703) Please check the magazine from manual port. Thank you May 13, 2025 at 8:30 AM, Szücs Géza FT-B : de én nem mehetek el a coating területről, nem szabad 🫡😉 May 13, 2025 at 8:32 AM, Kertész Dániel : This message was deleted. May 13, 2025 at 8:33 AM, Szücs Géza FT-B : The magazines are for manufacturing, and the they must can use the manual ports. May 13, 2025 at 9:11 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Manufacturing VD CA 5-1 still half chamber Please LR again. May 13, 2025 at 9:27 AM, Yaroslav SL/C 6 line : Hello everyone @fa AGV10 stopped with half out fork near 6 line ST4. Please fix it. Thanks May 13, 2025 at 9:45 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 34 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 271 • Cathode: 129 GF NC reel Available lot 4/5 line • AN: 238 • CA: 136 May 13, 2025 at 10:45 AM, 최정한.KOVA : [업무보고양식] 1. 라인/공정 : 6L-3 / VD CA 2. 시간 : 5/13 02:03 ~ 3. 현상 : right top heater(#7) nfb off 4. 원인 : 히터고장 5. 조치 : 히터교체 6. 결과 : 정상건조 모니터링중 7. 조치부서 : kova May 13, 2025 at 10:56 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 28 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 269 • Cathode: 136 GF NC reel Available lot 4/5 line • AN: 248 • CA: 138 May 13, 2025 at 11:47 AM, T. Gàbornè C SL NC : @Fa Please send the plate in the Storage. VD CA 5_01 Thx May 13, 2025 at 12:35 PM, QuangPhan : Hello! @FA NC AN AGV #3 error. Thanks May 13, 2025 at 1:22 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 24 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 269 • Cathode: 132 GF NC reel Available lot 4/5 line • AN: 238 • CA: 156 May 13, 2025 at 4:56 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 10 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 262 • Cathode: 152 GF NC reel Available lot 4/5 line • AN: 224 • CA: 177 May 13, 2025 at 5:10 PM, Pavel : Hi @fa AGV7 stopped at line 4 ST17. Please fix it. Thanks May 13, 2025 at 5:42 PM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing Can you please LR again for VD CA 6-10 half chamber. Thank you. May 13, 2025 at 5:54 PM, Mohammad Amir : @FA Please check E0CNVA52_RTV01 there is TR01 Position Alarm and it is blocking Reels delivery to line-6. Please check out this issue on priority. Thank you very much! May 13, 2025 at 6:00 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:13/13 Overtime (0):- Sick (0):- Holiday (0): - Shift change(0): Elektróda:(3) Oláh András, Kiss Balázs,Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(3): Magyar Balázs, Martina Dávid,Nagy Gábor May 13, 2025 at 6:08 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 13 Time: 18:00~06:00 1. Jeong Woo-jun May 13, 2025 at 6:39 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 20 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 273 • Cathode: 147 GF NC reel Available lot 4/5 line • AN: 225 • CA: 172 May 13, 2025 at 8:19 PM, KIM SEYEON [김세연]_FA : 05.13 Night shift 1F- Badmaa, Chinges GF- Zaya, Khaliun May 13, 2025 at 8:26 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 16 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 278 • Cathode: 160 GF NC reel Available lot 4/5 line • AN: 226 • CA: 188 May 13, 2025 at 8:38 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check C1STKA72_P21 there is auto step time over error and it is blocking materials recovery. Thank you very much! May 13, 2025 at 8:40 PM, Zaya/ivancsa FA : solved May 13, 2025 at 8:40 PM, Mohammad Amir : Thank you very much! May 13, 2025 at 9:03 PM, Mohammad Amir : @Zaya/ivancsa FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 13, 2025 at 9:10 PM, Mohammad Amir : @FA Could you please check this error it exists since 20:55. And it has blocked the reels delivery for production. Thank you very much! May 13, 2025 at 9:14 PM, Zaya/ivancsa FA : RTV is moving now May 13, 2025 at 9:14 PM, Mohammad Amir : Thank you very much! May 13, 2025 at 9:22 PM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_141 and P34 there is INV-01 Run time Over Error and it has blocked the stacking materials delivery to line -4&5&6. Please check the issue on priority as it will affect the production. Thank you very much! May 13, 2025 at 9:26 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 11 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 269 • Cathode: 166 GF NC reel Available lot 4/5 line • AN: 239 • CA: 198 Thank you very much! May 13, 2025 at 9:30 PM, Mohammad Amir : @FA @Hữu Thắng @Zaya/ivancsa FA Could you please confirm me is there any carrier actually exists at C3VDC030_P02/P03? Thank you very much! May 13, 2025 at 10:32 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 02 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 268 • Cathode: 172 GF NC reel Available lot 4/5 line • AN: 241 • CA: 203 Thank you very much! May 13, 2025 at 10:37 PM, Jun(정우준)_SKOH FA : @manufacture 명일 노칭 1라인 BR대비 반송테스트 하려고 하는데 금일야간 생산 담당자 연락 부탁드립니다. May 13, 2025 at 10:45 PM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVC52_RTV01 there is Data Loss Error and it has blocked the reels delivery. Thank you very much! May 13, 2025 at 10:47 PM, Zaya/ivancsa FA : hungarian technicians working on it May 13, 2025 at 10:47 PM, Mohammad Amir : Thank you very much for the information! May 13, 2025 at 11:01 PM, 정다은 : @Zaya/ivancsa FA Dear, could you check how many empty mgzs in GF? (AN/CA) May 13, 2025 at 11:02 PM, Mohammad Amir : Dear Sir, According to RTD, Available magazine empty :- CA:-4 AN:-0 Thank you very much! May 13, 2025 at 11:04 PM, Dániel Hufnágel : In that case please contact with @MCS member! Thank you! May 13, 2025 at 11:05 PM, Mohammad Amir : This message was deleted. May 13, 2025 at 11:05 PM, Mohammad Amir : @Khaliun/Ivancsa FA @Zaya/ivancsa FA I kindly request you to Please check and give me confirmation on this issue. Thank you very much! May 13, 2025 at 11:11 PM, Zaya/ivancsa FA : 3-3 is empty May 13, 2025 at 11:11 PM, Mohammad Amir : Thank you very much for the confirmation! May 13, 2025 at 11:12 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! May 13, 2025 at 11:13 PM, Mohammad Amir : Could you please also confirm me ,is there any carrier physically located at 6-6VD CA P04? Thank you very much! May 13, 2025 at 11:17 PM, Zaya/ivancsa FA : Yes, there is a carrier in P04 May 13, 2025 at 11:17 PM, Mohammad Amir : Please confirm me the id of this carrier. Thank you very much! May 13, 2025 at 11:20 PM, Zaya/ivancsa FA : MLC4188 May 13, 2025 at 11:21 PM, Mohammad Amir : Thank you very much for the confirmation. May 13, 2025 at 11:24 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 01 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 279 • Cathode: 168 GF NC reel Available lot 4/5 line • AN: 259 • CA: 201 Thank you very much! May 13, 2025 at 11:38 PM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 13, 2025 at 11:39 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check E0STKA52_C01 there is Travel time over error. Thank you very much! May 14, 2025 at 12:04 AM May 14, 2025 at 12:04 AM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. This error again came up. Thank you very much! May 14, 2025 at 12:08 AM, Mohammad Amir : @Zsurbej Zsolt F.A. Please check E0STKC51_C01 there is Load Oversize error (Right). Thank you very much! May 14, 2025 at 12:26 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 02 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 271 • Cathode: 168 GF NC reel Available lot 4/5 line • AN: 267 • CA: 186 Thank you very much! May 14, 2025 at 12:34 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check C1CNV071(8093) Robot #3 CA there is MGZ BCR Comp received error and it is slowing down empty magazine delivery speed. Thank you very much! May 14, 2025 at 12:46 AM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. This error again came up. Thank you very much! May 14, 2025 at 1:11 AM, 이도형 (Lee) : @FA VD An #10 AGV Check plz May 14, 2025 at 1:14 AM, Khaliun/Ivancsa FA : Solved May 14, 2025 at 1:19 AM, Khaliun/Ivancsa FA : @MCS VD Ca 6/3 is closed, so please delete the job. May 14, 2025 at 1:19 AM, Mohammad Amir : This message was deleted. May 14, 2025 at 1:20 AM, Mohammad Amir : Checking May 14, 2025 at 1:21 AM, Mohammad Amir : Done ✅. Thank you very much! May 14, 2025 at 1:21 AM, Khaliun/Ivancsa FA : Thank you. May 14, 2025 at 1:21 AM, Mohammad Amir : You are welcome! May 14, 2025 at 1:27 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 01 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 258 • Cathode: 154 GF NC reel Available lot 4/5 line • AN: 288 • CA: 187 Thank you very much! May 14, 2025 at 1:40 AM, Mohammad Amir : @Manufacturing Please check we are receiving constant error messages from C1CNV072_M02 cause carrier you are trying to insert has Magazine Polarity mismatch. Id is MLC2102 And Lots are MA6123,MA2578,MA1212,MA5579,MA3333,MA1388. Please check this issue. Polarity is different. Thank you very much! May 14, 2025 at 1:42 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check E0STKA52_C01 there is Travel time over error. Thank you very much! May 14, 2025 at 1:43 AM, Khaliun/Ivancsa FA : Solved May 14, 2025 at 1:44 AM, Mohammad Amir : Thank you very much! May 14, 2025 at 1:45 AM, Khaliun/Ivancsa FA : You are welcome! May 14, 2025 at 1:45 AM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. This error again came up. Thank you very much! May 14, 2025 at 1:54 AM, Khaliun/Ivancsa FA : @MCS NC CA AGV#10 idle check pls May 14, 2025 at 1:54 AM, Mohammad Amir : Sure, Checking May 14, 2025 at 1:56 AM, Mohammad Amir : There is an Unknown carrier on it,Could you please send it to the warehouse. Thank you very much! May 14, 2025 at 2:01 AM, Khaliun/Ivancsa FA : Solved May 14, 2025 at 2:02 AM, Mohammad Amir : Thank you very much! May 14, 2025 at 2:25 AM, 이도형 (Lee) : @Mohammad Amir EC1P073F5253614A Can you tell me the tray number? I got 2 with the same barcode number May 14, 2025 at 2:25 AM, Mohammad Amir : Sure Sir. I am checking. May 14, 2025 at 2:26 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 10 Pre STK > VD • Anode: 04 • Cathode: 03 Post STK > Stacking • Anode: 259 • Cathode: 171 GF NC reel Available lot 4/5 line • AN: 293 • CA: 178 Thank you very much! May 14, 2025 at 2:27 AM, 정은탁 (Jung EunTak) : @MCS EC1P073F5253614A Can you tell me the Tray Id of this Reel? May 14, 2025 at 2:27 AM, Mohammad Amir : Checking Sir. May 14, 2025 at 2:31 AM, Mohammad Amir : Dear Sir, @이도형 (Lee) & @정은탁 (Jung EunTak) EC1P073F5253614A:- Tray number is LTC1621. Currently located at E0STKC52(0100813). Please let me know if you need any further information. Thank you very much! May 14, 2025 at 3:04 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. May 14, 2025 at 3:04 AM, Mohammad Amir : Please check E0STKC52_C01 ready off during Forking error. Thank you very much! May 14, 2025 at 3:39 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_071 there is INV-02 Runtime over error and it is blocking stacking materials delivery. Thank you very much! May 14, 2025 at 3:39 AM, 이도형 (Lee) : @FA VD Ca #5 AGV Check plz May 14, 2025 at 3:44 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 13 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 255 • Cathode: 160 GF NC reel Available lot 4/5 line • AN: 326 • CA: 179 Thank you very much! May 14, 2025 at 4:40 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 17 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 253 • Cathode: 160 GF NC reel Available lot 4/5 line • AN: 349 • CA: 187 Thank you very much! May 14, 2025 at 4:41 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check E0CNVC52_BP15 there is Data Mismatch error. Thank you very much! May 14, 2025 at 5:33 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 29 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 247 • Cathode: 158 GF NC reel Available lot 4/5 line • AN: 366 • CA: 189 Thank you very much! May 14, 2025 at 5:36 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check MLA4011 located at C1CNV072_16_144 it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the carrier on mentioned location physically on priority as there will be shortages of materials for line 4&5&6 for stacking process. Thank you very much! May 14, 2025 at 5:43 AM, Mohammad Amir : @FA Please take action on this issue as there is shortages of stacking materials delivery. Thank you very much! May 14, 2025 at 5:49 AM, 안종수 : Please check NC AN #8 AGV May 14, 2025 at 5:51 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.14 "B" műszak, 8+1/12+1 Tech, 1Sl Overtime(0): Holiday(3): Csanálosi Gábor, Takács Ádám, Kovács Ágnes Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián --------------- Assy GF (2): Böröcz Tamás, Rácz Dániel --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Denkó János, Boromisza Zoltán --------------- Support: 방혁_이반차 (Bang Hyuk) May 14, 2025 at 5:51 AM, Mohammad Amir : @Jun(정우준)_SKOH FA Sir, Please check this issue as it is affecting stacking materials delivery. Thank you very much! May 14, 2025 at 5:55 AM, Ynja/ivancsa FA : solved May 14, 2025 at 5:55 AM, Jun(정우준)_SKOH FA : @방혁 PM(Bang.Hyuk) FA @Szücs Géza FT-B will check it, thanks!!! May 14, 2025 at 5:55 AM, Mohammad Amir : Thank you very much Sir. May 14, 2025 at 6:00 AM, duzzaman Md (MCS) : @FA Good morning! Please check E0CNVC52 RTV01 CV RUNTIME OVER ALARM May 14, 2025 at 6:01 AM, Ynja/ivancsa FA : solved May 14, 2025 at 6:24 AM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please share available lot May 14, 2025 at 6:28 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 34 • Cathode: 45 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 251 • Cathode: 151 GF NC reel Available lot 4/5 line • AN: 371 • CA: 183 Thank you! May 14, 2025 at 6:50 AM, 하연철(HA YEONCHEOL)/ : 금일 노칭 1라인 BR 예정 인데 gf an 1-3호기 앞에 agv 8호기 가 라인 아웃 되어 있습니다. 혹시 다른곳으로 이동 가능 할까요? May 14, 2025 at 6:51 AM, 하연철(HA YEONCHEOL)/ : @FA May 14, 2025 at 6:52 AM, 하연철(HA YEONCHEOL)/ : 정정 합니다 5호기 입니다. May 14, 2025 at 6:53 AM, Szücs Géza FT-B : hova szeretné elküldeni? May 14, 2025 at 6:56 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA Please talk to him and let's clarify his needs. May 14, 2025 at 7:04 AM, duzzaman Md (MCS) : @FA Please check E0STKA52_C01 there is Load oversize error. Thank you very much! May 14, 2025 at 7:24 AM, Rácz Dániel / FA : Solved May 14, 2025 at 7:35 AM, 김대웅 Kim Daewung : 1라인 양극 1호기 버스트런중인데 실매거진 떠가는중에 AGV 정지했습니다 확인 부탁드립니다 May 14, 2025 at 7:37 AM, 김대웅 Kim Daewung : @KIM SEYEON [김세연]_FA 실매거진 기울어지게 떠서 AGV에 Fork in abnormal 알람 떴습니다 May 14, 2025 at 7:38 AM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 지원부탁드립니다 May 14, 2025 at 7:39 AM, KIM SEYEON [김세연]_FA : 조금 기다려주세요. May 14, 2025 at 7:44 AM, KIM SEYEON [김세연]_FA : 05.14 Day shift 1F- Zulaa, Nandin GF- Yanja, Amgaa May 14, 2025 at 7:45 AM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA please take care of notching today fully May 14, 2025 at 7:48 AM, Ynja/ivancsa FA : i got it May 14, 2025 at 7:49 AM, KIM SEYEON [김세연]_FA : Photo May 14, 2025 at 7:49 AM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA please refer to it May 14, 2025 at 7:52 AM, 인제(Hwang) : 양극 1-2 공매거진 투입지연중입니다 확인 부탁드립니다 May 14, 2025 at 7:55 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 60 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 279 • Cathode: 162 GF NC reel Available lot 4/5 line • AN: 377 • CA: 185 Thank you! May 14, 2025 at 8:01 AM, 안종수 : NC AN #8 AGV AN 1-1 풀 매거짐 UR중 안착불량 발생 조치 부탁 드립니다. @FA May 14, 2025 at 8:03 AM, 김지수PM(Gyuri)_FA : @Ynja/ivancsa FA please check this one please, thanks May 14, 2025 at 8:07 AM, 인제(Hwang) : 양극 1라인 1호기 풀매거진 배출 중 안착위치불량 재발생했습니다 May 14, 2025 at 8:08 AM, 인제(Hwang) : @방혁 PM(Bang.Hyuk) FA AGV#10 입니다 May 14, 2025 at 8:08 AM, Ynja/ivancsa FA : otw May 14, 2025 at 8:33 AM, FACS_JaewonShin : ■ 14th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 14, 2025 at 8:43 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 56 • Cathode: 62 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 262 • Cathode: 154 GF NC reel Available lot 4/5 line • AN: 383 • CA: 186 Thank you! May 14, 2025 at 9:27 AM, Debreczeni Ármin : Agv #3 yelling front of line 1 May 14, 2025 at 9:52 AM, Lan Nhi : @FA Hello. Plz check for me VD/ An 4-1 the machine cannot read the information of the magazines when the agv puts the goods into the machine. Thanks May 14, 2025 at 10:17 AM, 안종수 : NC AN #6 AGV ERROR. Please check. @FA May 14, 2025 at 10:19 AM, 안종수 : NC AN 1라인1,2호기 공매거진 투입이 지연되고 있습니다. 확인 부탁 드립니다. @FA May 14, 2025 at 10:24 AM, 안종수 : 1라인 몽골 작업자 조치 안하고 그냥 갔습니다 아웃 포트 풀매거진 가득 찼습니다. 확인 부탁 드립니다. @KIM SEYEON [김세연]_FA May 14, 2025 at 10:24 AM, Ynja/ivancsa FA : 1-4 #04? May 14, 2025 at 10:27 AM, 안종수 : NC AN 1-2 Full MGZ UR Check please. @FA May 14, 2025 at 10:30 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 46 • Cathode: 53 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 259 • Cathode: 153 GF NC reel Available lot 4/5 line • AN: 404 • CA: 202 Thank you! May 14, 2025 at 10:31 AM, KIM SEYEON [김세연]_FA : @연해리 피엠님이 현재 현장서 조치중입니다. 조금만 기다려주십시오. May 14, 2025 at 10:33 AM, Deepu Divan FA-Eng : It's cleared May 14, 2025 at 10:35 AM, 인제(Hwang) : 양극 1라인 1호기 풀매거진 배출포트 AGV티칭작업으로 2,3호기 공매거진 투입 및 풀매거진 배출 지연됩니다 May 14, 2025 at 10:38 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52 RTV01 It's OOS Thanks! May 14, 2025 at 10:38 AM, Böröcz Tamás : We have to wear gloves so you can find us personaly ín assembly GF May 14, 2025 at 10:38 AM, Rácz Dániel / FA : Omv May 14, 2025 at 10:39 AM, Böröcz Tamás : After we got a company mobil I Will use it in gloves. Thanks for understanding May 14, 2025 at 10:39 AM, Böröcz Tamás : See you May 14, 2025 at 10:44 AM, Rácz Dániel / FA : Solved, May 14, 2025 at 10:59 AM, Ynja/ivancsa FA : @duzzaman Md (MCS) Please check VD CA 5-4, 4-8 half chamber Thank you May 14, 2025 at 11:00 AM, Ynja/ivancsa FA : Also VD AN 5-5 May 14, 2025 at 11:03 AM, M.Ferenc "B"Nc/Vd SL : @duzzaman Md (MCS) VD CA 4-8, 5-4 chambers. The AGV has only half loaded these two machines. Please check. The chambers have not received magazines for more than an hour. May 14, 2025 at 11:06 AM, duzzaman Md (MCS) : There is no available lot for 4_8 and 5_4 Also, no LR May 14, 2025 at 11:08 AM, duzzaman Md (MCS) : There is LR. 3 materials are available.it should be more than 4. Then the Job will be created. So, not enough material as well. May 14, 2025 at 11:12 AM, M.Ferenc "B"Nc/Vd SL : Thank you May 14, 2025 at 11:31 AM, 안종수 : NC AN 1-2 The supply of empty magazines is being delayed. Please check LR. @FA May 14, 2025 at 11:36 AM, duzzaman Md (MCS) : There is active LR Thank you May 14, 2025 at 11:44 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 51 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 237 • Cathode: 134 GF NC reel Available lot 4/5 line • AN: 406 • CA: 211 Thank you! May 14, 2025 at 11:54 AM, 하연철(HA YEONCHEOL)/ : Magazine loading and unloading is delayed on all equipment in Line 1. @FA May 14, 2025 at 12:03 PM, Rácz Dániel / FA : @mcs May 14, 2025 at 12:05 PM, duzzaman Md (MCS) : AGV on the way.also everything is normal from MCS side May 14, 2025 at 12:05 PM, Rácz Dániel / FA : Thank you May 14, 2025 at 12:18 PM, Rácz Dániel / FA : GF AN NC 1 line AGV problem May 14, 2025 at 12:19 PM, Rácz Dániel / FA : Sorry CA May 14, 2025 at 12:20 PM, 인제(Hwang) : 양극 1라인 공매거진 공급 원활하지 않습니다 May 14, 2025 at 12:25 PM, Rácz Dániel / FA : Solved May 14, 2025 at 12:33 PM, Yosyp Tovt : Helloo line 4 AGV number 1 stopped May 14, 2025 at 12:34 PM, Rácz Dániel / FA : Ich komme May 14, 2025 at 12:35 PM, 하연철(HA YEONCHEOL)/ : notching All equipment on Line 1 has stopped. The empty magazine is not arriving. @fa May 14, 2025 at 12:35 PM, Rácz Dániel / FA : @mcs please May 14, 2025 at 12:36 PM, 하연철(HA YEONCHEOL)/ : Please at least give Line 1 a higher priority. It’s very urgent. @rtd May 14, 2025 at 12:36 PM, duzzaman Md (MCS) : Checking May 14, 2025 at 12:38 PM, 김상호 : GF 노칭 1라인3호기 앞에 1호기 AGV 알람 발생중입니다 May 14, 2025 at 12:38 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV#1 stopped near 1-3 machine. May 14, 2025 at 12:40 PM, 인제(Hwang) : 1라인 양/음극 아직 버스트런 생산 중입니다. 공매거진 투입 및 풀매거진 배출 지연 발생하는데 지원 부탁드립니다 May 14, 2025 at 12:40 PM, duzzaman Md (MCS) : For Cathode side materials are already on AGV. AGV 1,2,10 are assigned May 14, 2025 at 12:40 PM, M.Ferenc "B"Nc/Vd SL : Elindult May 14, 2025 at 12:42 PM, duzzaman Md (MCS) : Also the same for Anode side, materials for C1NCA010 is in vehicle 07 For other active jobs, I'm increasing the priority. Thanks ! May 14, 2025 at 12:49 PM, 하연철(HA YEONCHEOL)/ : Thank you! May 14, 2025 at 12:58 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please check NC empty magazines are assigned and going to NC AN 1-1 and 1-2. May 14, 2025 at 12:59 PM, KIM SEYEON [김세연]_FA : no magazines at our cv now May 14, 2025 at 1:02 PM, Sazzad Bhai SKon : There are 2 transport jobs for 1-1 anode. Checking the reason for delay May 14, 2025 at 1:02 PM, KIM SEYEON [김세연]_FA : how about 1-2? May 14, 2025 at 1:03 PM, Sazzad Bhai SKon : No search lot, because all the outbound ports of gantry have job, May 14, 2025 at 1:03 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 34 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 225 • Cathode: 123 GF NC reel Available lot 4/5 line • AN: 392 • CA: 200 Thank you! May 14, 2025 at 1:04 PM, Böröcz Tamás : AGVs wait too long for each other, unnecessarily. And robot 1 was OoS for a while. May 14, 2025 at 1:09 PM, 전 운 (Jeon Woon) : @FA C1CNV072 Plate not moving Please hurry up check. May 14, 2025 at 1:14 PM, Sazzad Bhai SKon : NC AN 1-2 line, both LR and UR are active. May 14, 2025 at 1:16 PM, Sazzad Bhai SKon : Yes true, please check AGV 02. ACS emergency May 14, 2025 at 1:17 PM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA two errors at gf stacking 4.5.6line May 14, 2025 at 1:17 PM, KIM SEYEON [김세연]_FA : please check agv errors May 14, 2025 at 1:19 PM, Böröcz Tamás : The CV stopped that's agv errors occured May 14, 2025 at 1:20 PM, KIM SEYEON [김세연]_FA : got it May 14, 2025 at 1:23 PM, Böröcz Tamás : An empty plate with broken handle caused the stoping. Manufaturing please ask operators to take care about it and do not insert broken plates. Thanks May 14, 2025 at 1:28 PM, KIM SEYEON [김세연]_FA : @심재훈 @김대웅 Kim Daewung 피엠님 플레이트 손잡이 파손 볼수 있는데가 스택밖에 없을것 같은데, 작업자들이 손잡이 파손된것 있음 선제적으로 뺄수 있게 공유 및 교육부탁드립니다. May 14, 2025 at 1:29 PM, KIM SEYEON [김세연]_FA : please remove the plate May 14, 2025 at 1:34 PM, Böröcz Tamás : We removed it suddenly before I offset the AGV at NC 1-3 May 14, 2025 at 1:41 PM, 전 운 (Jeon Woon) : @FA C1CNV072 160721 Track INV-02 RUN Time Over Error. check please May 14, 2025 at 1:42 PM, Ynja/ivancsa FA : On my way! May 14, 2025 at 1:48 PM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 피엠님 버스트런 종료시 공유부탁드립니다. May 14, 2025 at 1:52 PM, 김대웅 Kim Daewung : 2시 종료 예정입니다 May 14, 2025 at 1:54 PM, 연해리 : @duzzaman Md (MCS) Hello, Please check out the trigger below for the Reel Tray to come out on the NC port on April 30th. EA1M073E9102512A LTA0790 EA1M073E9102512B LTA0993 May 14, 2025 at 2:08 PM, Betti B SL : L6 ST hardly comes AGV does not return the empty magazine and does not bring a full magazine May 14, 2025 at 2:09 PM, Sazzad Bhai SKon : Checking May 14, 2025 at 2:10 PM, Sazzad Bhai SKon : There is active LR, but search lot not available May 14, 2025 at 2:11 PM, Sazzad Bhai SKon : UR is active and jobs created normally May 14, 2025 at 2:22 PM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca robot #3 stopped. "Magazin detect sensor error" May 14, 2025 at 2:24 PM, 인제(Hwang) : NC Ca Robot#2 Error May 14, 2025 at 2:36 PM, Sazzad Bhai SKon : Notching AN 1-1, 1-2 both lines are normal now (LR and UR). But jobs getting delayed for AGV May 14, 2025 at 2:36 PM, Lan Nhi : @FA plz check for me 4-1 An machine has not been supplied with empty magazine for a long time. thanks May 14, 2025 at 2:41 PM, duzzaman Md (MCS) : For LTA0790, It was manually racked out successfully at E0CNVA52_M04 at April 30, 11:42. It has been just racked in at 11:32 from E0CNVA52_MO4 No abnormalities has been found in MCS/RTD log. As it was racked out and racked in manually, no more information is available at MCS/RTD. The current location is E1SLA030_P02 It's the same for LTA0993 as well. It was racked out at E0CNVA52_M05 on April 11:45, but this one is not racked in yet. It's still at the same place since then. The state is May 14, 2025 at 2:42 PM, Sazzad Bhai SKon : LR received at 14:16. But all the outbound ports of gantry have jobs. So, after completing other lines, magazines will come to 4-1 line May 14, 2025 at 2:43 PM, Lan Nhi : Yes, thank you May 14, 2025 at 2:43 PM, duzzaman Md (MCS) : @연해리 May 14, 2025 at 3:05 PM, Böröcz Tamás : @Debreczeni Ármin Ide tudsz jönni az anód VD utáni raktárhoz? May 14, 2025 at 3:05 PM, Böröcz Tamás : Vagy valaki MESes hozzáféréssel May 14, 2025 at 3:07 PM, Böröcz Tamás : De homeofficeból is jó nekem May 14, 2025 at 3:09 PM, M.Ferenc "B"Nc/Vd SL : Megyek May 14, 2025 at 3:10 PM, Debreczeni Ármin : @duzzaman Md (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : 25 plate please send AN stack materials to c1stka72 m01 port Need amount : 25 plate @Kristina @Mykhailo @Yosyp Tovt @Betti B SL May 14, 2025 at 3:26 PM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA please come to stacking gf 4.5.6lime May 14, 2025 at 3:26 PM, KIM SEYEON [김세연]_FA : conveyor has stopped May 14, 2025 at 3:31 PM, duzzaman Md (MCS) : 25+25 has been sent already. Thank you May 14, 2025 at 4:00 PM, 방혁 PM(Bang.Hyuk) FA : @FA @Ynja/ivancsa FA Please check GF ST CA AGV 01 May 14, 2025 at 4:01 PM, 방혁 PM(Bang.Hyuk) FA : Also C1CNV072 has stop from INV TIME OVER May 14, 2025 at 4:04 PM, 방혁 PM(Bang.Hyuk) FA : @김지수PM(Gyuri)_FA C72 C02크레인 포크 뻗은 상태로 죽었습니다. 크레인 포크 센터링 해주시고 정상가동후 순환 물류 재가동 부탁드립니다. May 14, 2025 at 4:05 PM, Ynja/ivancsa FA : solved May 14, 2025 at 4:07 PM, 방혁 PM(Bang.Hyuk) FA : @김지수PM(Gyuri)_FA 팸님 순환물류 양극 UNK자재가 자리 점유중이라 물동량에 영향 있어보입니다. 메뉴얼포트에서 배출 요청드립니다! May 14, 2025 at 4:07 PM, 방혁 PM(Bang.Hyuk) FA : 16005포트로 배출예상자재 6개있습니다 May 14, 2025 at 4:12 PM, Ynja/ivancsa FA : @Manufacturing Check out C1CNV072_M01 and 1+5 carriers in the queue. we take out 2 carriers Thank you! May 14, 2025 at 4:15 PM, Ynja/ivancsa FA : The issue with the M01 port material is causing c2cnv072 errors. May 14, 2025 at 4:15 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 10 • Cathode: 32 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 190 • Cathode: 96 GF NC reel Available lot 4/5 line • AN: 385 • CA: 275 Thank you! May 14, 2025 at 4:35 PM, 안종수 : 1라인 B&R Test 생산 종료 되었습니다. 참고 부탁드립니다. @KIM SEYEON [김세연]_FA May 14, 2025 at 4:39 PM, 인제(Hwang) : NC Ca Robot#3 Error May 14, 2025 at 4:40 PM, Ynja/ivancsa FA : C1STKA71’s crane error pls check it May 14, 2025 at 4:41 PM, 안종수 : @FA Cathode 1-1, 1-3 Full Magazine UR is not working. Please check it. May 14, 2025 at 4:41 PM, Böröcz Tamás : Please remove the carrier from manual port May 14, 2025 at 4:43 PM, Sazzad Bhai SKon : NC CA , last UR received at 14:00 May 14, 2025 at 4:45 PM, 안종수 : I’m sorry. It's AN. Please check it again. May 14, 2025 at 4:46 PM, Ynja/ivancsa FA : removed it May 14, 2025 at 4:46 PM, Sazzad Bhai SKon : UR received and job created for both lines AN 1-1, 1-3 May 14, 2025 at 4:47 PM, 안종수 : Thank you 😊 May 14, 2025 at 4:48 PM, Böröcz Tamás : Others solved May 14, 2025 at 5:38 PM, 하연철(HA YEONCHEOL)/ invited 원재, 권건혁 and 김태헌. May 14, 2025 at 6:04 PM, Mohammad Amir : Good evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 12 • Cathode: 40 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 181 • Cathode: 101 GF NC reel Available lot 4/5 line • AN: 378 • CA: 145 Thank you! May 14, 2025 at 6:07 PM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 14, 2025 at 6:13 PM, Mohammad Amir : @Vékony Ferenc Please check this issue ,it has blocked the Anode reels delivery. Thank you very much! May 14, 2025 at 7:03 PM, 이도형 (Lee) : @Mohammad Amir "Please provide information on Production Line 1 of Jeon Warehouse and the undried plates." May 14, 2025 at 7:03 PM, Mohammad Amir : Checking May 14, 2025 at 7:05 PM, Mohammad Amir : Available materials for Pre VD warehouse -VD for Line -1:- AN:-3(MLA6070,0087,2228) CA:-0 Please let me know if you need any further information. Thank you very much! May 14, 2025 at 7:07 PM, 이도형 (Lee) : thank you May 14, 2025 at 7:07 PM, Mohammad Amir : You are welcome! May 14, 2025 at 7:09 PM, Mohammad Amir : @FA Please check E0STKA52 _C01 there is travel time over error. Thank you very much! May 14, 2025 at 7:24 PM, Mohammad Amir : Good evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 07 • Cathode: 48 Pre STK > VD • Anode: 05 • Cathode: 01 Post STK > Stacking • Anode: 156 • Cathode: 85 GF NC reel Available lot 4/5 line • AN: 354 • CA: 131 Thank you! May 14, 2025 at 7:55 PM, Mohammad Amir : @Vékony Ferenc @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. This error came up again. Thank you very much! May 14, 2025 at 7:58 PM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKA71_C01 /C02 there is Light curtain detected error. Thank you very much! May 14, 2025 at 7:59 PM, Mohammad Amir : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01,it will increase stacking materials delivery speed. Thank you very much! May 14, 2025 at 8:02 PM, Nagy Tibor : solved May 14, 2025 at 8:02 PM, Mohammad Amir : Thank you very much! May 14, 2025 at 8:24 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 41 Pre STK > VD • Anode: 06 • Cathode: 00 Post STK > Stacking • Anode: 160 • Cathode: 79 GF NC reel Available lot 4/5 line • AN: 345 • CA: 119 Thank you! May 14, 2025 at 8:34 PM, Elena Dzhul : Hello!AGV2 stopped near stk#20/L4,please check. Thanks! May 14, 2025 at 8:34 PM, Dariimaa/다리마/Ivancsa : Solved May 14, 2025 at 10:08 PM, Elena Dzhul : AGV4 stopped near L4/stk14,please check May 14, 2025 at 10:14 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 33 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 180 • Cathode: 90 GF NC reel Available lot 4/5 line • AN: 346 • CA: 105 Thank you very much! May 14, 2025 at 11:03 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check E0STKA52_C02 there is Fork#2 Received data error. Thank you very much! May 14, 2025 at 11:03 PM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKA71_C01 there is Load Oversize error (Left). Thank you very much! May 14, 2025 at 11:13 PM, Vékony Ferenc : Kész! May 14, 2025 at 11:13 PM, Mohammad Amir : Thank you very much! May 14, 2025 at 11:51 PM, Mohammad Amir : @FA @Vékony Ferenc Please check E0STKA52_C01 there is Load oversize error. Thank you very much! May 14, 2025 at 11:59 PM, Vékony Ferenc : Kész.! May 14, 2025 at 11:59 PM, Mohammad Amir : Thank you very much! May 15, 2025 at 12:16 AM May 15, 2025 at 12:16 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 30 Pre STK > VD • Anode: 04 • Cathode: 00 Post STK > Stacking • Anode: 186 • Cathode: 95 GF NC reel Available lot 4/5 line • AN: 360 • CA: 94 Thank you very much! May 15, 2025 at 12:56 AM, Mohammad Amir : @Vékony Ferenc Please check E0STKA51_C02 there is STK time over error. Thank you! May 15, 2025 at 12:58 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC71_P12 there is Data Mismatch error. Thank you very much! May 15, 2025 at 1:10 AM, Mohammad Amir : @Vékony Ferenc Please check this error still exists. Thank you very much! May 15, 2025 at 1:23 AM, Vékony Ferenc : Kész van! May 15, 2025 at 1:29 AM, Mohammad Amir : Thank you very much! May 15, 2025 at 1:34 AM, Mohammad Amir : @Vékony Ferenc @FA @Dariimaa/다리마/Ivancsa Please check C1STKA72_P21 there is INV-01 Run time Over Error and it is blocking materials recovery. Thank you very much! May 15, 2025 at 1:41 AM, Vékony Ferenc : Kész van! May 15, 2025 at 1:42 AM, Mohammad Amir : Materials recovery has been normalized ✅. Thank you very much! May 15, 2025 at 1:43 AM, 이도형 (Lee) : @FA Nc Ca #9 AGV Check plz May 15, 2025 at 1:46 AM, Andrea Zentay : @Mohammad Amir we need help. NC CA 5/3, NC CA 6/2 :AGV doesn't come for full magazines. Please check. Thank you May 15, 2025 at 1:46 AM, Mohammad Amir : Checking May 15, 2025 at 1:51 AM, Mohammad Amir : This message was deleted. May 15, 2025 at 1:51 AM, Mohammad Amir : Ur received successfully,there are jobs from the mentioned machines. But because of AGVS blocking eachother these jobs are not progressing. @ACS @FA Please check AGV#5 ,AGV#3 ,AGV#10 these AGVs are blocking other AGVs that's why jobs for NC CA 5-3 and 6-2 doesn't progress. Thank you very much! May 15, 2025 at 1:52 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa please check this issue. Thank you very much! May 15, 2025 at 2:04 AM, 이도형 (Lee) : @FA Nc Ca #2 AGV Check plz May 15, 2025 at 2:07 AM, Mohammad Amir : @FA @Vékony Ferenc Please check E0STKA52_C01 there is Load oversize error. Thank you very much! May 15, 2025 at 2:10 AM, Badamaa/Ivancsa FA : solved May 15, 2025 at 2:16 AM, Eduard SL Shift A : Line 6 ST3 AGV 9 stopped May 15, 2025 at 2:17 AM, Barta Rudi : @FA VD CA AGV 7 stopped, please check, thank you May 15, 2025 at 2:20 AM, Vékony Ferenc : Kész van! May 15, 2025 at 2:21 AM, Mohammad Amir : Thank you very much! May 15, 2025 at 2:21 AM, Dariimaa/다리마/Ivancsa : Solved May 15, 2025 at 2:29 AM, Elena Dzhul : AGV9 stopped near L6 stk3,please check May 15, 2025 at 2:30 AM, Dariimaa/다리마/Ivancsa : AGV#9 no problem May 15, 2025 at 2:55 AM, 이주봉PM LEE JUBONG(FA) : @김수민 제가 갈게요 Gf 음극만 자재 부족한 상황인가요? May 15, 2025 at 2:57 AM, 이주봉PM LEE JUBONG(FA) invited 은향(OH EUN HYANG). May 15, 2025 at 2:58 AM, 이주봉PM LEE JUBONG(FA) : @김수민 반송명령 내리지말고 기다려주세요 제가 갈게요. @은향(OH EUN HYANG) 금일 출근한 삼구 FA 출장자 분들 3명은 GF 음극으로 와주세요.! May 15, 2025 at 2:59 AM, 이주봉PM LEE JUBONG(FA) : 노칭 공정으로 오세요 May 15, 2025 at 3:03 AM, Nagy Tibor : @Mohammad Amir "MLC2039 is located at C1CNVC71_P04. Please check it. It needs to be moved further to the warehouse." May 15, 2025 at 3:03 AM, Mohammad Amir : Checking May 15, 2025 at 3:12 AM, Mohammad Amir : Please give me current location of this carrier. Thank you very much! May 15, 2025 at 3:14 AM, Nagy Tibor : 8028[COPVC030_P04] May 15, 2025 at 3:14 AM, Mohammad Amir : Thank you very much! May 15, 2025 at 3:21 AM, Mohammad Amir : Location has been updated ✅. Please check currently robot #3 CA is currently OOS. Thank you very much! May 15, 2025 at 3:25 AM, Nagy Tibor : There is no change May 15, 2025 at 3:36 AM, 김수민 : Plz check an nc robot#3 May 15, 2025 at 3:37 AM, 조범희 : 1L InPort29,30 앞쪽 AGV 4호기 멈춰있습니다 확인부탁드립니다 May 15, 2025 at 3:39 AM, Mohammad Amir : Issue has been resolved ✅. Thank you very much. May 15, 2025 at 3:57 AM, Eduard SL Shift A : Line 6 ST 9 AGV 3 stopped May 15, 2025 at 4:09 AM, Nagy Tibor : Gf nc ca Robot 3 nem dolgozik. kérnénk segítséget. May 15, 2025 at 4:18 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 59 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 210 • Cathode: 108 GF NC reel Available lot 4/5 line • AN: 385 • CA: 62 Thank you very much! May 15, 2025 at 4:36 AM, 김수민 : @Nagy Tibor Plz check Ca nc robot May 15, 2025 at 4:36 AM, 김수민 : The robot does not transport the magazine. May 15, 2025 at 4:37 AM, Nagy Tibor : This message was deleted. May 15, 2025 at 4:38 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV072_16_075/063 there is INV-01 Run time Over Error and it has blocked the stacking materials delivery. Please check on priority. Thank you very much! May 15, 2025 at 4:38 AM, Nagy Tibor : Gf nc ca Robot 3 is not working. please help May 15, 2025 at 4:49 AM, Dariimaa/다리마/Ivancsa : Solvef May 15, 2025 at 4:49 AM, Mohammad Amir : Thank you very much! May 15, 2025 at 5:25 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 64 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 203 • Cathode: 113 GF NC reel Available lot 4/5 line • AN: 413 • CA: 67 Thank you very much! May 15, 2025 at 5:42 AM, 안종수 : NC AN 3-3 아웃포트 매거진 이동시 디버터에서 계속 에러 발생합니다. 확인 부탁드립니다. @이주봉PM LEE JUBONG(FA) May 15, 2025 at 5:47 AM, 이도형 (Lee) : @FA Nc Ca Robot #3 Check plz May 15, 2025 at 5:50 AM, 안종수 : Diverter runtime over-error It's. May 15, 2025 at 5:57 AM, 이주봉PM LEE JUBONG(FA) : 네 May 15, 2025 at 5:59 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.15 "B" műszak, 9/12 Tech, 1Sl Overtime(0): Holiday(4): Csanálosi Gábor, Takács Ádám, Kovács Ágnes , 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(0): May 15, 2025 at 6:21 AM, 안종수 : Please manually release it to the port E0STKA51_M01~06, 09, 10 LTA0045 0243 0974 0649 0813 0804 0846 @MCS May 15, 2025 at 6:23 AM, 안종수 : @FA The same error continues to occur. Please check it. May 15, 2025 at 6:29 AM, Shahbaz 샤바즈 MCS/RTD : There was only LTA0045, for which I created a transfer command. It seems the others have already been removed. May 15, 2025 at 6:39 AM, 안종수 : Please manually release it to the port E0STKA51_M01~06, 09, 10 LTA0846 0752 0979 1001 0573 0220 0666 0677 @MCS May 15, 2025 at 6:39 AM, M.Ferenc "B"Nc/Vd SL : @Shahbaz 샤바즈 MCS/RTD Good Morning! Please manually release it to the port E0STKC51_M01~06, 09, 10 LTC1982 1608 0984 0069 0608 0552 0060 0409 1646 0651 1071 0408 1352 1600 1986 0467 0657 0460 0935 1644 May 15, 2025 at 6:40 AM, 안종수 : Yes, thank you for the confirmation. I will send you another tray ID, so please order the shipment. May 15, 2025 at 6:40 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Working in it. May 15, 2025 at 6:42 AM, Shahbaz 샤바즈 MCS/RTD : Sorry, none of them are in carrier list. May 15, 2025 at 6:47 AM, M.Ferenc "B"Nc/Vd SL : @Shahbaz 샤바즈 MCS/RTD This carriers are in the warehouse? May 15, 2025 at 6:48 AM, Shahbaz 샤바즈 MCS/RTD : No, they are already removed. May 15, 2025 at 6:52 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command created for these reel trays. Thank you May 15, 2025 at 6:52 AM, M.Ferenc "B"Nc/Vd SL : Thank you! May 15, 2025 at 6:57 AM, 안종수 : @KIM SEYEON [김세연]_FA NC AN 3-3 Outport Debutter Runtime Overer is continuously occurring. Please check it. May 15, 2025 at 7:03 AM, Rácz Dániel / FA : We are here and monitoring the error. May 15, 2025 at 7:08 AM, M.Ferenc "B"Nc/Vd SL : Please manually release it to the port E0STKA51_M01~06, 09, 10 LTA0744 0132 0971 0378 0381 0464 0843 0161 0071 0592 0952 0166 0068 0980 0950 0336 0690 0973 0437 0239 May 15, 2025 at 7:13 AM, Rácz Dániel / FA : @김지수PM(Gyuri)_FA Could you come here and help me? May 15, 2025 at 7:14 AM, 김지수PM(Gyuri)_FA : Okey! May 15, 2025 at 7:15 AM, Shahbaz 샤바즈 MCS/RTD : Transfer command has been created for the available reel trays. However, the following trays are not available in the system: LTA0378, 0161, 0592, 0952, 0166, 0068, 0980, 0950, 0336, 0690, 0973, 0437, 0239 May 15, 2025 at 7:18 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 96 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 220 • Cathode: 80 GF NC reel Available lot 4/5 line • AN: 433 • CA: 62 May 15, 2025 at 7:26 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKA71 “Load oversize error” Thank you May 15, 2025 at 7:33 AM, 이주봉PM LEE JUBONG(FA) : 조치완료 했습니다. May 15, 2025 at 7:37 AM, 안종수 : 감사합니다 May 15, 2025 at 7:44 AM, 인제(Hwang) : NC Ca AGV#1 Error May 15, 2025 at 7:56 AM, M.Ferenc "B"Nc/Vd SL : @Shahbaz 샤바즈 MCS/RTD If these reels are in the warehouse, Please manually release it to the port E0STKA51_M01~06 LTA0915 0029 0430 0141 0964 0012 0278 0168 0886 0058 0697 0056 0252 May 15, 2025 at 8:01 AM, Shahbaz 샤바즈 MCS/RTD : There was just LTA0141 for which I created a transfer command. May 15, 2025 at 8:05 AM, M.Ferenc "B"Nc/Vd SL : Thanks May 15, 2025 at 8:10 AM, FACS_JaewonShin : ■ 15th May Ivancsa FA CS - Withes service Daily(08:00 - 18:00) : 9 people - Team leader 1 Shin jaewon □Electrode / Assembly - Mechanic 2 Oh changhoon Choi wooseok - Plc control 2 Son songmin Kim bareum □Formation / Module - Mechanic 2 Lee yeongmin Son hyeongi - PLC Control 2 Jin taehyeong Jin jaejeong May 15, 2025 at 8:21 AM, 인제(Hwang) : NC Ca AGV#1 Error again May 15, 2025 at 8:27 AM, Sazzad Bhai SKon : Good morning, @FA Please check the following UNKDUP carriers. Plate1: UNKDUP-MLC4194-A (C1STKC71, 0205202) Plate2: UNKDUP-MLC4194-B (C1STKC71, 0100103) Plate3: UNKDUP-MLC4188 (C1STKC72, 0200202) Plate4: UNKDUP-MLC4189 (C1STKC72, 0105505) May 15, 2025 at 8:53 AM, 안종수 : This message was deleted. May 15, 2025 at 8:54 AM, 안종수 : Please manually release it to the port E0STKA51_M01~06, 09, 10 LTA0813 0846 0666 0679 0141 0314 0699 0933 0767 0445 0058 1067 3line R&R Only the tray was not shipped from the reel list. Please ship it from the warehouse. @MCS May 15, 2025 at 8:56 AM, Ngoc zia : @fa can u come to help line 4 Nc An warehousing pls. The ports doesn’t work. May 15, 2025 at 8:59 AM, Shahbaz 샤바즈 MCS/RTD : There were 3 reel trays in the stocker for which I created a transfer command. May 15, 2025 at 9:04 AM, 안종수 : NC AN #8 AGV ERROR. Please check @FA May 15, 2025 at 9:05 AM, 안종수 : Please tell me the 3 tray id. May 15, 2025 at 9:07 AM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. May 15, 2025 at 9:08 AM, Shahbaz 샤바즈 MCS/RTD : LTA0314, 0933 and 1067 May 15, 2025 at 9:08 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 15, 2025 at 9:08 AM, 안종수 : Thank you so much May 15, 2025 at 9:10 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please FA technicians support this May 15, 2025 at 9:11 AM, Szücs Géza FT-B : which WH? May 15, 2025 at 9:17 AM, Szücs Géza FT-B : I've been in the area for hours. No error messages anywhere. All WH is fine. I'm not getting accurate information, so I can't do anything. May 15, 2025 at 9:20 AM, 이한웅(삼구) : 음극 릴 창고 공트레이 투입 안되는데 확인 부탁드립니다. May 15, 2025 at 9:23 AM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 64 • Cathode: 102 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 208 • Cathode: 72 GF NC reel Available lot 4/5 line • AN: 459 • CA: 77 May 15, 2025 at 9:35 AM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing Can you please LR again for VD CA 3-7 half chamber. Thank you. May 15, 2025 at 9:59 AM, Betti B SL : This message was deleted. May 15, 2025 at 10:04 AM, 김지수PM(Gyuri)_FA : @FA could you please check the VC06 in GF AN VD? May 15, 2025 at 10:05 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 15, 2025 at 10:08 AM, Yon Ko/연커/ : I’ll check May 15, 2025 at 10:17 AM, 김지수PM(Gyuri)_FA : Who is taking action on the problem of C1STKA71_02? May 15, 2025 at 10:18 AM, Rácz Dániel / FA : We are here May 15, 2025 at 10:20 AM, Yon Ko/연커/ : Korean technician working on it. May 15, 2025 at 10:21 AM, 김지수PM(Gyuri)_FA : Thanks for checking May 15, 2025 at 10:32 AM, Böröcz Tamás : @mcs Manufaturing ask us to move the plates from CA VD 5-3 they press unload request but ACS did nőt generating order May 15, 2025 at 10:35 AM, Shahbaz 샤바즈 MCS/RTD : There is a carrier location mismatch, the UR received from port P03 for the plate MLC4195, but the plate MLC4195 is already in stocker C1STKC71_0100107 May 15, 2025 at 10:42 AM, Koncz Tamás : EOSTKA51 raktárat Alpinista cég ellenőrzése miatt kis időre leállítom, May 15, 2025 at 10:46 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1STKC71 “Load oversize error” Thank you May 15, 2025 at 10:55 AM, Koncz Tamás : Készen vagyunk May 15, 2025 at 10:57 AM, Böröcz Tamás : Because there are 2 plate with same ID :) May 15, 2025 at 10:58 AM, 이한웅(삼구) : NC Ca 3-3 아웃포트 스톱처 실린더 센서 확인 부탁드립니다 May 15, 2025 at 10:58 AM, Shahbaz 샤바즈 MCS/RTD : Yes, the same Plate ID is in stocker for which UR received from the CA VD 5-3 May 15, 2025 at 10:59 AM, Böröcz Tamás : Only situation when theory and practice match May 15, 2025 at 11:00 AM, Shahbaz 샤바즈 MCS/RTD : @FA Please confirm the plate MLC4195 @ C1STKC71_0100107. The UR received for same ID from VD 5-3. Thank you May 15, 2025 at 11:00 AM, Böröcz Tamás : Working May 15, 2025 at 11:01 AM, Böröcz Tamás : How Mány confirm you want? May 15, 2025 at 11:01 AM, Böröcz Tamás : Many May 15, 2025 at 11:01 AM, Böröcz Tamás : This is a confirmation May 15, 2025 at 11:03 AM, Böröcz Tamás : Now only 1 exist May 15, 2025 at 11:03 AM, Böröcz Tamás : And we have a plate without ID May 15, 2025 at 11:04 AM, Shahbaz 샤바즈 MCS/RTD : Okay, then it’s not possible for two identical plates to exist in the system that’s why job creation is not possible May 15, 2025 at 11:04 AM, Böröcz Tamás : Thanks May 15, 2025 at 11:05 AM, Shahbaz 샤바즈 MCS/RTD : Where is the plate without ID, is it in VD 5-3? May 15, 2025 at 11:06 AM, Böröcz Tamás : Its in C71 manual port May 15, 2025 at 11:06 AM, Böröcz Tamás : Waiting for the responsable person May 15, 2025 at 11:07 AM, Shahbaz 샤바즈 MCS/RTD : So that was the problem. That plate was stored in stocker as MLC4195. May 15, 2025 at 11:08 AM, 김대웅 Kim Daewung : @KIM SEYEON [김세연]_FA 피엠님, 해당 건으로 FA 테크니션 지원하였지만 조치를 못하셔서 저희가 직접 조치하고 있습니다 May 15, 2025 at 11:09 AM, Böröcz Tamás : There was 2 plate with same ID May 15, 2025 at 11:09 AM, KIM SEYEON [김세연]_FA : 네 확인하겠습니다. May 15, 2025 at 11:12 AM, Böröcz Tamás : 문제를 보지 못하면 도울 수 없습니다. 불행히도 우리 인원이 적기 때문에 하루 종일 거기 서 있을 시간이 없습니다. 어차피 급여는 낮지만 집에 갈 수는 있겠지. May 15, 2025 at 11:13 AM, KIM SEYEON [김세연]_FA : @Böröcz Tamás cs engineer will check that problem. thank you for your work. May 15, 2025 at 11:14 AM, Deepu Divan FA-Eng : The issue is cleared by the assembly team , it was a cylinder sensor detection problem. May 15, 2025 at 11:14 AM, Böröcz Tamás : I hope my salary Will thank May 15, 2025 at 11:14 AM, 이한웅(삼구) : 조치 완료했습니다. May 15, 2025 at 11:17 AM, Shahbaz 샤바즈 MCS/RTD : @Manufacturing C1CNV072_M04 there is 1+7 carriers are waiting. Please remove them. Thank you May 15, 2025 at 11:36 AM, 심재훈 : 음극 3-3배출도 봐주세요. 작업자가 손으로 밀어넣고 있습니다. May 15, 2025 at 11:38 AM, Lee Junghan(이정한)_CS : 네 확인하겠습니다. May 15, 2025 at 11:58 AM, 임석호(Henry) : C1CNV072 Tray Data Missmatch Alarma Chack PLZ May 15, 2025 at 11:59 AM, 이한웅(삼구) : @KIM SEYEON [김세연]_FA 안녕하세요. 노칭 양극 매거진 순환이 느립니다. 확인 부탁드립니다. May 15, 2025 at 12:00 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 5-3 The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 15, 2025 at 12:21 PM, 이한웅(삼구) : NC Ca 3-3 아웃포트 확인 부탁드립니다. May 15, 2025 at 12:24 PM, KIM SEYEON [김세연]_FA : 제가 지금 NA CA 3-3인데 잠시 와주실수 있나요? @이한웅(삼구) May 15, 2025 at 12:31 PM, Betti B SL : L6 ST on the wall side stopped with the #9 AGV error May 15, 2025 at 12:32 PM, Debreczeni Ármin : Betti ez az amit mondtam hogy a sor elején áll? May 15, 2025 at 12:33 PM, Betti B SL : The AGV does not take empty magazines and parcels from the L6 ST wall side, so there are no magazines on one side. May 15, 2025 at 12:33 PM, Betti B SL : Nem ez másik May 15, 2025 at 12:34 PM, Betti B SL : Lehet hogy az volt de most másik van meg állva ugyan ott May 15, 2025 at 12:35 PM, Betti B SL : #9 AGV le kapcsolták May 15, 2025 at 12:39 PM, Debreczeni Ármin : Megnéznéd melyik állomás az? May 15, 2025 at 12:48 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please check agv is assigned for notching ca 3-3 UR May 15, 2025 at 12:49 PM, Sazzad Bhai SKon : Yes, AGV 03 was assigned for MC3445 May 15, 2025 at 12:50 PM, KIM SEYEON [김세연]_FA : good May 15, 2025 at 12:51 PM, Sazzad Bhai SKon : We received another UR for an UNK carrier, AGV 01 is assigned for this too May 15, 2025 at 12:53 PM, KIM SEYEON [김세연]_FA : @it was failed to carry out the magazine at 3-3 May 15, 2025 at 12:53 PM, KIM SEYEON [김세연]_FA : agv 1 cannot take unk carrier? May 15, 2025 at 12:53 PM, KIM SEYEON [김세연]_FA : what agv assigned for 3-3 can ur? May 15, 2025 at 12:55 PM, Sazzad Bhai SKon : It can take UNK carrier May 15, 2025 at 12:56 PM, Sazzad Bhai SKon : For 3-3 line AGV 1 is assigned May 15, 2025 at 1:00 PM, KIM SEYEON [김세연]_FA : how to transfer agv 1 unk carrier to vd storage? @Sazzad Bhai SKon May 15, 2025 at 1:01 PM, Sazzad Bhai SKon : There is already a job for going to STK. I can delete and recreate the Job manually May 15, 2025 at 1:01 PM, KIM SEYEON [김세연]_FA : ok May 15, 2025 at 1:03 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon NC CA 3-1 needs UR quickly May 15, 2025 at 1:03 PM, Yon Ko/연커/ : @MCS hello! Since there’s an error occurring with AGV9 ODSL at ST AN. could you please cancel its jobs? May 15, 2025 at 1:03 PM, KIM SEYEON [김세연]_FA : did it make? May 15, 2025 at 1:03 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please do it May 15, 2025 at 1:04 PM, Sazzad Bhai SKon : Cancel it. We'll transfer to gantry now May 15, 2025 at 1:06 PM, Sazzad Bhai SKon : Yes UR received and job created, AGV 1 assigned May 15, 2025 at 1:06 PM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 @김대웅 Kim Daewung 피엠님 금일 노칭 릴 출고시 릴이 아직 나오고 있는 도중 작업자가 트레이를 끌어당겨서 잡이 완료전에 리 취외되어 크레인 잡이 많이 꼬여 비가동 발생했습니다. 릴창고 음극 51번 창고 측면 Port SCS Command 미종료 내용정리 1. REEL.출고시 목적지 도착하여 COMPLETE처리전 라이트커튼 감지 2. TRAY는 나오는 반송 COMPLETE 안되었는데.REEL 취외 후 투입 3. 투입버튼 눌러도 아직 출고작업이 완료되지 않아 입고 작업은 NACK처리 4. PORT DATA 및 JOB 과 실물처리는 완료 삼구분들께 우선 가이드 드릴테니 작업자에게 교육 부탁드립니다. 필요하시면 릴출고 작업자들 모아주시면 제가 금일 주간 교육하겠습니다. May 15, 2025 at 1:07 PM, Sazzad Bhai SKon : *CNV May 15, 2025 at 1:18 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check stack line 6 agv 6 error May 15, 2025 at 1:21 PM, Yon Ko/연커/ : Normal working. May 15, 2025 at 1:22 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon is NC CA 3-3 agv assigned with empty magazine? May 15, 2025 at 1:22 PM, KIM SEYEON [김세연]_FA : need empty magazine at 3-3 May 15, 2025 at 1:23 PM, Sazzad Bhai SKon : No May 15, 2025 at 1:23 PM, Sazzad Bhai SKon : Checking LR May 15, 2025 at 1:25 PM, Sazzad Bhai SKon : Last LR received from 3-3 CA was at 12:33. Job not created because all outbound ports of gantry was busy. May 15, 2025 at 1:26 PM, M.Ferenc "B"Nc/Vd SL : @Sazzad Bhai SKon If these reels are in the warehouse, Please manually release it to the port E0STKC51_M01~06, M9~M10 LTC0401 0425 0590 1624 1877 1701 1854 0847 1393 1120 0117 0204 1932 0135 0342 0282 May 15, 2025 at 1:27 PM, Sazzad Bhai SKon : Pre VD > gantry, empty magazines available. Anode: 119 Cathode: 115 May 15, 2025 at 1:31 PM, Sazzad Bhai SKon : Strated transferring from M01 to M06 May 15, 2025 at 1:36 PM, 인제(Hwang) : @KIM SEYEON [김세연]_FA PM님 양극 3라인 전호기 공매거진 부족합니다. 확인 부탁드립니다 May 15, 2025 at 1:37 PM, Böröcz Tamás : @mcs May 15, 2025 at 1:37 PM, KIM SEYEON [김세연]_FA : 네 제가 지금 노칭 양극에 있습니다. May 15, 2025 at 1:37 PM, KIM SEYEON [김세연]_FA : 공매거진 가고있는 중입니다. May 15, 2025 at 1:38 PM, Sazzad Bhai SKon : Hello manager, job created now. MC1458 on the way May 15, 2025 at 1:38 PM, Sazzad Bhai SKon : For NC CA 3-3 line. AGV 04 assigned May 15, 2025 at 1:38 PM, Debreczeni Ármin : @Sazzad Bhai SKon please send CA stack materials to c1stkc72 m01 port. Need amount : 15 plate please send AN stack materials to c1stka72 m01 port Need amount : 15 plate Thank you @Kristina @Vladyslav Kucher @Mykhailo @Betti B SL May 15, 2025 at 1:39 PM, Sazzad Bhai SKon : We'll check May 15, 2025 at 1:41 PM, Sazzad Bhai SKon : 3-3 line port 03, a manual job has been created. May 15, 2025 at 1:45 PM, Debreczeni Ármin : And please share lot quantity thank yoz May 15, 2025 at 1:47 PM, Sazzad Bhai SKon : Post VD to stack, Anode: 129 Cathode: 18 May 15, 2025 at 1:48 PM, Sazzad Bhai SKon : 15 anode has been ordered, but since yesterday 8 more were pending. So total 23 will arrive at anode Manual port. May 15, 2025 at 1:48 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 121 • Cathode: 121 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 129 • Cathode: 18 GF NC reel Available lot 4/5 line • AN: 517 • CA: 71 May 15, 2025 at 1:53 PM, Debreczeni Ármin : No problem thank you May 15, 2025 at 2:15 PM, 안종수 : NC AN #8 AGV ERROR. Please check @FA May 15, 2025 at 2:45 PM, 이한웅(삼구) : @KIM SEYEON [김세연]_FA 양극 3라인 릴 부족으로 릴 7개 정도 순위 올려서 수동으로 꺼내겠습니다. May 15, 2025 at 2:51 PM, 이한웅(삼구) : Please Check NC Ca reel warehouse M10 port May 15, 2025 at 2:52 PM, KIM SEYEON [김세연]_FA : @이한웅(삼구) RTD OP에게 부탁하는게 좋겠습니다. May 15, 2025 at 2:52 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon May 15, 2025 at 2:52 PM, KIM SEYEON [김세연]_FA : please share carrier number May 15, 2025 at 2:53 PM, 김대웅 Kim Daewung : 이미 수동명령 내렸는데 M10에 릴트레이 나오다가 컨베어에 걸렸습니더 May 15, 2025 at 2:54 PM, Sazzad Bhai SKon : Pre VD to gantry, empty magazines. Cathode: 116 Anode: 120 May 15, 2025 at 2:55 PM, Sazzad Bhai SKon : For reels 3rd line cathode: 106 May 15, 2025 at 2:57 PM, 김대웅 Kim Daewung : 걸린거 저희가 펜스 사이로 손 넣어서 땡겨서 꺼냈습니다 May 15, 2025 at 2:58 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. 점검하겠습니다. May 15, 2025 at 3:08 PM, 안종수 : NC AN 3-1 공매거진 공급 지연되고 있습니다. 확인 바랍니다.@FA May 15, 2025 at 3:09 PM, 안종수 : 3-2, 3-3 공급 지연되고 있습니다. May 15, 2025 at 3:10 PM, Shahbaz 샤바즈 MCS/RTD : This message was deleted. May 15, 2025 at 3:23 PM, M.Ferenc "B"Nc/Vd SL : @FA @MCS The AGVs are not unloading the full magazines from the machines. Could you please look into the problem? May 15, 2025 at 3:23 PM, KIM SEYEON [김세연]_FA : which room? what agv number? May 15, 2025 at 3:24 PM, Shahbaz 샤바즈 MCS/RTD : Which line and machine plz? May 15, 2025 at 3:25 PM, M.Ferenc "B"Nc/Vd SL : Sorry! Now NC Anode side L4,L5,L6 all machine. May 15, 2025 at 3:26 PM, Betti B SL : We cannot call AGVs to the Katód AGV Station at the end of the row in front of machine #4 on the L6 wall side because the call button does not work and the indicator is brightly lit. May 15, 2025 at 3:28 PM, Shahbaz 샤바즈 MCS/RTD : The job are created for all machines with UR but it seems due to higher priority for 3rd line, the AGVs are transferring the magazines from 3rd line first. May 15, 2025 at 4:03 PM, 안종수 : NC AN 3-1, 3-2, 3-3 공매거진 공급 지연돠고 있습니다. 확인 바랍니다. @FA May 15, 2025 at 4:19 PM, M.Ferenc "B"Nc/Vd SL : @MCS For Nc cathode side 4/1 machine, no empty magazines are coming. Please check. May 15, 2025 at 4:23 PM, Shahbaz 샤바즈 MCS/RTD : Just loaded by AGV#07 May 15, 2025 at 4:27 PM, 안종수 : @MCS NC AN 3-1, 3-2 empty magazine No, I don’t. Please check LR. May 15, 2025 at 4:29 PM, Shahbaz 샤바즈 MCS/RTD : LR is up for both, waiting for empty magazines at gantry. May 15, 2025 at 4:35 PM, 안종수 : The facility stopped because there was no empty magazine. May 15, 2025 at 4:37 PM, Shahbaz 샤바즈 MCS/RTD : One Job just created for NC An 3-1 May 15, 2025 at 4:38 PM, 안종수 : Line 3 is undergoing R&R TEST. Please increase the supply priority of Empty magazine on line 3. May 15, 2025 at 4:39 PM, Shahbaz 샤바즈 MCS/RTD : The priority is already high than other lines. May 15, 2025 at 5:30 PM, 인제(Hwang) : NC Ca AGV#1 금일 Ca 3-1 P01 위치에서 T align zone abnormal 알람 계속 발생합니다. 확인 부탁드립니다 May 15, 2025 at 5:34 PM, P.Bence A SSL : Check again please thank you May 15, 2025 at 5:35 PM, Shahbaz 샤바즈 MCS/RTD : GF Next lot quantity available Pre STK > Notching • Anode: 104 • Cathode: 107 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 85 • Cathode: 10 GF NC reel Available lot 4/5 line • AN: 528 • CA: 65 May 15, 2025 at 6:14 PM, 이도형 (Lee) : @FA E0SSTKA51 4포트에 1F 릴 출고 됐습니다 EA2P081F514251B 확인부탁합니다. May 15, 2025 at 6:16 PM, 이도형 (Lee) : E0SSTKA51_C02 확인요청 May 15, 2025 at 8:21 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 89 • Cathode: 84 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 51 • Cathode: 23 GF NC reel Available lot 4/5 line • AN: 493 • CA: 83 May 15, 2025 at 9:01 PM, 이도형 (Lee) : @FA Nc An AGV #8 Check plz May 15, 2025 at 9:16 PM, VK (mcs) : @FA Please check anode reel STK A52 There is no error but cranes are stopped. Thx May 15, 2025 at 9:22 PM, 이도형 (Lee) : @FA Nc An AGV #6 Check plz May 15, 2025 at 10:54 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 86 • Cathode: 92 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 53 • Cathode: 15 GF NC reel Available lot 4/5 line • AN: 477 • CA: 78 May 15, 2025 at 10:58 PM, VK (mcs) : @FA Please confirm carrier ID in Anode reel STK A51 ports M02 (6118)(6117)& M05 (6112)(6111). Is there any actual carrier? May 15, 2025 at 11:04 PM, Imre : Üres. May 15, 2025 at 11:47 PM, 김수민 : @VK (mcs) Please check the materials that can be put into CA VD LINE 3-1~9 in the front warehouse. May 15, 2025 at 11:49 PM, Barta Rudi : @FA VD AN AGV 7 stopped, please check, thank you May 15, 2025 at 11:50 PM, VK (mcs) : There are only 3 plates available for Cathode VD line 3 MLC3230 MLC1215 MLC2245 May 16, 2025 at 12:28 AM May 16, 2025 at 12:28 AM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC52 -M01 (9028)& M02(9029) Carriers are not transferred. May 16, 2025 at 12:50 AM, 김수민 : Plz recheck May 16, 2025 at 12:51 AM, VK (mcs) : There is only 1 carrier available MLC4038 May 16, 2025 at 12:58 AM, P.Bence A SSL : L3 WO changed now We call Agv May 16, 2025 at 1:00 AM, VK (mcs) : Materials are being released to CNV ports 23 & 24 May 16, 2025 at 1:11 AM, VK (mcs) : @FA Please check it. Problem still not solved. May 16, 2025 at 1:20 AM, Spilka Sofia : Line 3 St 2 AGV7 stop please check, thank you May 16, 2025 at 1:33 AM, 정은탁 (Jung EunTak) : @MCS EC1P073F5261711B Could you tell me the Reel Tray number? May 16, 2025 at 1:37 AM, VK (mcs) : Carrier ID : LTC1055 Currently it's inside STK C 52(0200902) May 16, 2025 at 2:00 AM, 이도형 (Lee) : @MCS "Please tell me the carrier number." EC4M730F5205421B May 16, 2025 at 2:03 AM, VK (mcs) : Sorry but I couldn't find a carrier Id with this LOT. Are you sure about it? May 16, 2025 at 2:14 AM, Dariimaa/다리마/Ivancsa : Solved May 16, 2025 at 2:18 AM, 이도형 (Lee) : "This reel has the magazine number." MC3517 2435 1138 5529 3472 2372 May 16, 2025 at 2:30 AM, VK (mcs) : Do you want plate id for these MGZs? I couldn't find any reel with that LOT ID. May 16, 2025 at 2:32 AM, Spilka Sofia : Line 3 St 15 AGV4 stop please check, thank you May 16, 2025 at 2:37 AM, 이도형 (Lee) : EC4M730F5205421B May 16, 2025 at 2:38 AM, 이도형 (Lee) : "Is it in the rear warehouse?" May 16, 2025 at 2:39 AM, VK (mcs) : There is not such a LOT ID in the system. May 16, 2025 at 2:59 AM, VK (mcs) : @FA Please check Cathode pre-STK C71 Load oversize error. May 16, 2025 at 3:09 AM, 이도형 (Lee) : Okay, thank you. May 16, 2025 at 3:19 AM, VK (mcs) : @FA Please check Anode reel STK A52 Load oversize error. May 16, 2025 at 3:32 AM, P.Bence A SSL : L6 st Agv9 stop please check May 16, 2025 at 3:40 AM, Dariimaa/다리마/Ivancsa : This message was deleted. May 16, 2025 at 3:43 AM, Dariimaa/다리마/Ivancsa : @MCS Please delete the job C1CNV072_P035 MLA1208. We cannot update the information. May 16, 2025 at 3:43 AM, VK (mcs) : MLA1208 is located in the STKA71 May 16, 2025 at 3:44 AM, VK (mcs) : As I see in MCS MLA2064 is located in CNV P35! May 16, 2025 at 3:46 AM, Dariimaa/다리마/Ivancsa : CNV P35 is MLA1208 May 16, 2025 at 3:47 AM, VK (mcs) : But both MCS and SCS indicates that Carrier is inside the STK. Please transfer it to the manual port and rack-in it again. May 16, 2025 at 3:51 AM, Dariimaa/다리마/Ivancsa : The job cannot be transferred to the manual port because it cannot be deleted from the CCS application. May 16, 2025 at 4:01 AM, VK (mcs) : There is no solution from MCS. May 16, 2025 at 4:03 AM, VK (mcs) : For that carrier. job can not be executed because of a mismatch location. First should be solved in CCS then I can transfer it. May 16, 2025 at 4:44 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 78 • Cathode: 86 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 60 • Cathode: 05 GF NC reel Available lot 4/5 line • AN: 400 • CA: 74 May 16, 2025 at 5:02 AM, 안종수 invited 김현태. May 16, 2025 at 6:09 AM, 안종수 : NC CA #9 AGV ERROR. Please check. @FA May 16, 2025 at 6:15 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.16 Time:06:00~18:00 1. BAEK HOJONG 백호종PM Köszönöm szépen May 16, 2025 at 6:27 AM, T. Gàbornè C SL NC : @MCS Please check this AGV loading task in the next furnace. VD CA 5_01 5_06 5_08 6_03 Thank you for much. May 16, 2025 at 6:34 AM, duzzaman Md (MCS) : No lot available. There is no active job. There's no active LR as well. They are all in service. May 16, 2025 at 6:38 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 71 • Cathode: 97 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 67 • Cathode: 00 GF NC reel Available lot 4/5 line • AN: 397 • CA: 66 May 16, 2025 at 6:56 AM, QuangPhan : Hello! Good morning @FA NC AN AGV #8 error. Thanks May 16, 2025 at 7:25 AM, 조한진(Jin) : 3라인 ST 전극 공급 느려지고 있습니다. 확인 부탁 드립니다. May 16, 2025 at 7:27 AM, QuangPhan : Hello! Good morning! Dear @MCS Could you please check Tray ID LTA0381 ( EA2P081F5142511B) shipped to E0STKA51 M04 (GF). This is the reel of 1F. Thanks May 16, 2025 at 7:29 AM, duzzaman Md (MCS) : There are active jobs for ST Line 3 May 16, 2025 at 7:32 AM, 안종수 : NC AN #6 AGV ERROR. Please check @FA #6 AGV node is blocked, so all 4-line AGVs are idling. @FA May 16, 2025 at 7:34 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 16, 2025 at 7:43 AM, duzzaman Md (MCS) : @FA KINDLY CHECK STK AN 51_B07 & 52_C02 Data on , sensor off overtime error. MCP AP error Thanks May 16, 2025 at 7:44 AM, Yon Ko/연커/ : Sorry im working CNV now but both agv issues solved May 16, 2025 at 7:48 AM, Dima Kusyk : Good morning everyone! Please, share updated information. Thank you! May 16, 2025 at 7:52 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 73 • Cathode: 93 Pre STK > VD • Anode: 09 • Cathode: 02 Post STK > Stacking • Anode: 51 • Cathode: 00 GF NC reel Available lot 4/5 line • AN: 391 • CA: 47 May 16, 2025 at 7:53 AM, QuangPhan : Dear @MCS . Could you please ship the reel back to the warehouse. thanks May 16, 2025 at 7:54 AM, duzzaman Md (MCS) : This message was deleted. May 16, 2025 at 7:54 AM, duzzaman Md (MCS) : You are correct. This is Hyundai material for 1st floor. May 16, 2025 at 8:06 AM, duzzaman Md (MCS) : As it is in the manual port, please restock it to the same port.it would return then. Thank you. May 16, 2025 at 8:19 AM, QuangPhan : Hello! @FA NC AN AGV #9 error. Thanks May 16, 2025 at 8:19 AM, 정다은 : @KIM SEYEON [김세연]_FA 3L RR 중입니다 전극 부족으로 곧 비가동 발생할 수 있는데, 조치 진행 중일까요? May 16, 2025 at 8:20 AM, 정다은 : 3라인 순환물류 문제로 3,4호기쪽 라인은 매거진 스테이션 거의 비워진 상태입니다. May 16, 2025 at 8:21 AM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_124 Carrier MLA0092 is stuck there. Please check it physically. Thank you May 16, 2025 at 8:32 AM, KIM SEYEON [김세연]_FA : 네 확인하겠습니다. May 16, 2025 at 8:33 AM, KIM SEYEON [김세연]_FA : Photo May 16, 2025 at 8:34 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ @Zaya/ivancsa FA please check stacking 1.2.3line as a 1st priority. thanks. May 16, 2025 at 8:34 AM, KIM SEYEON [김세연]_FA : today!!!! May 16, 2025 at 8:34 AM, Yon Ko/연커/ : We take care of this. May 16, 2025 at 8:34 AM, Zaya/ivancsa FA : yes 👍 May 16, 2025 at 8:35 AM, KIM SEYEON [김세연]_FA : thanks May 16, 2025 at 8:35 AM, KIM SEYEON [김세연]_FA : thanks May 16, 2025 at 8:37 AM, Sazzad Bhai SKon : Good morning, @FA Please check the following UNKDUP carriers. Plate1: UNKDUP-MLC4194-A (C1STKC71, 0205202) Plate2: UNKDUP-MLC4194-B (C1STKC71, 0100103) Plate3: UNKDUP-MLC4188 (C1STKC72, 0200202) Plate4: UNKDUP-MLC4189 (C1STKC72, 0105505) Plate 4: UNKDUP-MLC4195 (C1STKC71, 0105403) Plate5: UNKDUP-MLA0145 (C1STKA71, 0200303) Thank you May 16, 2025 at 8:44 AM, QuangPhan : Hello! @FA NC AN AGV #6 error. Thanks May 16, 2025 at 8:46 AM, T. Gàbornè C SL NC : @FA Please check AGV VD CA side. Finised 5_07 6_05 6_08 No move AGV the plate. Thx. May 16, 2025 at 8:52 AM, 안종수 : VD CA #5 AGV ERROR. Please check @FA May 16, 2025 at 8:58 AM, 안종수 : NC CA #3 Robot error. Please check. @FA May 16, 2025 at 9:03 AM, T. Gàbornè C SL NC : @MCS Please check AGV VD CA side. Finised 5_07 6_05 6_08 6_09 6_02 No move AGV the plate. Thx. May 16, 2025 at 9:13 AM, 연해리 : @Sazzad Bhai SKon Hello, MLC2166, MLC4193 were released from Pre-VD warehouse at 6:56 AM, but have not been transferred until now. Please delete the orders from MCS, RTD and send them to Post-VD warehouse. May 16, 2025 at 9:23 AM, duzzaman Md (MCS) : Carriers are moving towards Post VD STK. Thanks ! May 16, 2025 at 9:31 AM, T. Gàbornè C SL NC : @MCS The next CA VD is waiting for a unloading AGV, please check it out. Thank you for much 6_05 6_02 6_09 5_05 5_04 May 16, 2025 at 9:47 AM, 연해리 : @Sazzad Bhai SKon C1CNVC71 is still showing as down in LV Monitoring, but the equipment is actually running without any alarms. I think it's because the alarm that occurred on May 15th was not cleared. Could you forcefully clear this part on the MCS side? May 16, 2025 at 9:48 AM, duzzaman Md (MCS) : There are jobs for all of these. The AGVs are busy @ACS could you please check. May 16, 2025 at 9:50 AM, Sazzad Bhai SKon : Yes you're right. There is a alarm from C0PVC030_P06 : MCS data report incomplete error. May 16, 2025 at 9:51 AM, 연해리 : Please wait a moment, I will try to reconcile in CIM. May 16, 2025 at 9:54 AM, Sazzad Bhai SKon : Alarm is cleared now, thank you May 16, 2025 at 9:55 AM, 연해리 : Thank you :) May 16, 2025 at 9:59 AM, Lajos Gábor F.A. : @mcs Could you check E0CNVC52, rtv not moving with material LTC0578 May 16, 2025 at 10:04 AM, Sazzad Bhai SKon : All of the chamber has job. But ACS is overloaded with many jobs, please wait sometimes, jobs will be cleared soon May 16, 2025 at 10:07 AM, duzzaman Md (MCS) : Please check RTV. No problem from MCS/RTD May 16, 2025 at 10:15 AM, duzzaman Md (MCS) : Please delete all the manual jobs from RTV. Then we'll create a job from here again. May 16, 2025 at 10:15 AM, Lajos Gábor F.A. : RTV working right, but I dont see transfer for that carryer. Could you create order? May 16, 2025 at 10:17 AM, duzzaman Md (MCS) : We created one. It got colompleted. But physically its still there. So, please delete all the manual jobs for rtv. And we'll create again. May 16, 2025 at 10:18 AM, Zaya/ivancsa FA : @mcs Vd cathode side chamber5-7(#43) has a 3material, pls check? Should i return to stk? May 16, 2025 at 10:18 AM, Sazzad Bhai SKon : Please manually transfer only the odd number plates. May 16, 2025 at 10:19 AM, Sazzad Bhai SKon : For the pair unit ( unit 1+2, or unit 3+4) the job can be transferred by UR May 16, 2025 at 10:20 AM, Sazzad Bhai SKon : In this case from line 5-7, transfer only from P03 manually, MLC4125 May 16, 2025 at 10:21 AM, Lajos Gábor F.A. : Now there isnt order in the transfer list for this carryer, could you try it now? May 16, 2025 at 10:25 AM, duzzaman Md (MCS) : Working on it. Its a special scenario May 16, 2025 at 10:26 AM, QuangPhan : Hello! @FA NC AN AGV #6 error. Thanks May 16, 2025 at 10:28 AM, 김주연 : @JAEYOON KIM / CS 매니저님 reel 상공데크에서 rtv 반송잡 수행을 못하고잇는데요, M09쪽 화물이 없는데도 dest인터락 리플라이 주고잇습니다 음극 상공데크입니다. 확인부탁드립니다 May 16, 2025 at 10:30 AM, 김주연 : 아 양극입니다!! May 16, 2025 at 10:35 AM, Sazzad Bhai SKon : This is ccs error. Destination interlock error. May 16, 2025 at 10:38 AM, Lajos Gábor F.A. : I restarted the conveyor, now is working. Thanks for the help. May 16, 2025 at 10:41 AM, Sazzad Bhai SKon : E0STKA52_C01 is oos since 10:29 May 16, 2025 at 10:43 AM, JAEYOON KIM / CS : 음극 현재 자재 반송한 뒤 rtv 점검중이며 양극은 정상반송중이라 합니다. May 16, 2025 at 10:44 AM, 박태영 : RTV 점검결과 되면 공유주세요 May 16, 2025 at 10:45 AM, 김주연 : 양극 rtv는 혹시 어떻게 조치하셧을까요? May 16, 2025 at 10:45 AM, JAEYOON KIM / CS : 네 알겠습니다. May 16, 2025 at 10:45 AM, JAEYOON KIM / CS : 확인 후 공유드리겠습니다 May 16, 2025 at 10:57 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 104 Pre STK > VD • Anode: 25 • Cathode: 03 Post STK > Stacking • Anode: 51 • Cathode: 05 GF NC reel Available lot 4/5 line • AN: 369 • CA: 45 May 16, 2025 at 11:21 AM, Yaroslav SL/C 6 line : @fa AGV3 stopped near 6line ST10. Please check May 16, 2025 at 11:24 AM, Kertész Dániel : @duzzaman Md (MCS) Hello! Can you check why the operators can't send back the LTA0451 from the E0STKA51_M08 port? May 16, 2025 at 11:32 AM, duzzaman Md (MCS) : This message was deleted. May 16, 2025 at 11:33 AM, Kertész Dániel : It's empty May 16, 2025 at 11:34 AM, Sazzad Bhai SKon : @MES Could you please check the carrier status. MCS status is okay: empty May 16, 2025 at 11:34 AM, duzzaman Md (MCS) : In that case, in MES needs to be modified May 16, 2025 at 11:38 AM, duzzaman Md (MCS) : @FA PLEASE CHECK E0STKA52_C01 STK TIMEOVER ERROR THANK YOU May 16, 2025 at 11:40 AM, Kertész Dániel : @manufacturing please modify it May 16, 2025 at 11:59 AM, Sazzad Bhai SKon : Hello Daniel, The problem happened due to the carrier was not removed from the manual port successfully. Normal scenario is: first remove the carrier from the port fully, takeout the reel, and re-enter the carrier. Thank you May 16, 2025 at 12:00 PM, Kertész Dániel : @manufacturing please do this way next time, thanks May 16, 2025 at 12:14 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 61 • Cathode: 91 Pre STK > VD • Anode: 24 • Cathode: 02 Post STK > Stacking • Anode: 62 • Cathode: 10 GF NC reel Available lot 4/5 line • AN: 364 • CA: 60 May 16, 2025 at 1:13 PM, duzzaman Md (MCS) : @FA PLEASE CHECK E0CNVC52_RTV01 It's OOS. Thank you! May 16, 2025 at 1:23 PM, Sazzad Bhai SKon : E0STKA52_C01: crane stopped, travel time error May 16, 2025 at 1:32 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 62 • Cathode: 101 Pre STK > VD • Anode: 17 • Cathode: 00 Post STK > Stacking • Anode: 74 • Cathode: 12 GF NC reel Available lot 4/5 line • AN: 345 • CA: 69 May 16, 2025 at 1:33 PM, 안종수 : This message was deleted. May 16, 2025 at 1:34 PM, 김주연 : @FA 노칭 양극 gf agv1호기 에러 조치 요청드립니다 May 16, 2025 at 1:34 PM, 안종수 : @duzzaman Md (MCS) Hello mcs Please manually release it to the port E0STKC51_M01, 02 LTC0541 1932 Thank you May 16, 2025 at 1:35 PM, Zaya/ivancsa FA : already im here May 16, 2025 at 1:37 PM, duzzaman Md (MCS) : Already Initiated transfer. Thank you. May 16, 2025 at 1:40 PM, 안종수 : Thank you so much Have a nice day. May 16, 2025 at 2:53 PM, T. Gàbornè C SL NC : @FA Please check GF CA reel Storage. STP-01 Down Cylinder error Thx May 16, 2025 at 3:59 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 91 Pre STK > VD • Anode: 21 • Cathode: 00 Post STK > Stacking • Anode: 78 • Cathode: 26 GF NC reel Available lot 4/5 line • AN: 286 • CA: 72 May 16, 2025 at 4:17 PM, duzzaman Md (MCS) : @FA Please check C1STKA71 P13/P14 LIGHT CURTAIN ERROR thank you May 16, 2025 at 4:17 PM, Zaya/ivancsa FA : korean technician working here May 16, 2025 at 5:25 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 63 • Cathode: 89 Pre STK > VD • Anode: 25 • Cathode: 00 Post STK > Stacking • Anode: 78 • Cathode: 44 GF NC reel Available lot 4/5 line • AN: 308 • CA: 80 May 16, 2025 at 5:58 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Károly, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 16, 2025 at 6:08 PM, Jun(정우준)_SKOH FA : Night Shift FA Technician Schedule Date: 25. May. 16 Time: 18:00~06:00 1. Jeong Woo-jun May 16, 2025 at 6:17 PM, Mohammad Amir : Good evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 61 • Cathode: 93 Pre STK > VD • Anode: 11 • Cathode: 01 Post STK > Stacking • Anode: 95 • Cathode: 36 GF NC reel Available lot 4/5 line • AN: 300 • CA: 85 Thank you! May 16, 2025 at 6:22 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 16 Time: 18:00~06:00 1. Jeong Woo-jun PM 2. Samkoo Lee Minjae 3.Samkoo Choi Gisu May 16, 2025 at 6:41 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 16, 2025 at 6:46 PM, Mohammad Amir : Now there are 1+3 carriers waiting. Please take action @Manufacuring. Thank you very much! May 16, 2025 at 6:47 PM, Ivan Chobitko invited Mezhenskiy. May 16, 2025 at 6:47 PM, Ivan Kasian Sl 5L 🥹 : Good evening. Let's do it. May 16, 2025 at 6:48 PM, Mohammad Amir : Thank you very much Ivan . May 16, 2025 at 6:56 PM, Mohammad Amir : @Manufacturing Please LR again for VD CA 5-7 for P01/02 as there is half chamber situation. Thank you May 16, 2025 at 7:17 PM, 정다은 : @Mohammad Amir Dear, could you share how many plates for 3L, in post ST -> Staking warehouse? May 16, 2025 at 7:17 PM, Mohammad Amir : Okay Sir, Checking. May 16, 2025 at 7:21 PM, Mohammad Amir : Ca-09 AN-22. Thank you very much! May 16, 2025 at 7:25 PM, Mohammad Amir : I beg your apologies Ma'am,I addressed you as Sir. Thank you very much! May 16, 2025 at 7:48 PM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check C1STKA71_C01 there is Travel First Movement Error. Thank you very much! May 16, 2025 at 7:58 PM, Novák Károly F. A. : Done May 16, 2025 at 7:59 PM, Mohammad Amir : Thank you very much! May 16, 2025 at 8:00 PM, Mohammad Amir : @Novák Károly F. A. @Fa Please check E0CNVA52_07_048/47 Data Loss error and Data Mismatch error. Blocking the reels delivery. Thank you very much! May 16, 2025 at 8:09 PM, Novák Károly F. A. : Solved May 16, 2025 at 8:10 PM, Mohammad Amir : Thank you very much! May 16, 2025 at 8:21 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 59 • Cathode: 91 Pre STK > VD • Anode: 25 • Cathode: 01 Post STK > Stacking • Anode: 84 • Cathode: 35 GF NC reel Available lot 4/5 line • AN: 271 • CA: 72 Thank you! May 16, 2025 at 8:37 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC52_C01 there is Ready off during Forking error. Thank you very much! May 16, 2025 at 8:40 PM, 카스텔 발라지 F.A. : Working on it May 16, 2025 at 8:48 PM, Mohammad Amir : Please also check E0STKC51 _C01 there is MCP Auto/Manual Mode error. Thank you very much! May 16, 2025 at 9:05 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C01 there is Fork#2 Load Position Error when Active . Thank you very much! May 16, 2025 at 9:14 PM, Mohammad Amir : @카스텔 발라지 F.A. Please check this error still exists ,it is blocking reels delivery. Thank you very much! May 16, 2025 at 9:16 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check as well ,C1STKA71_P15/16 there is Light curtain error and it is blocking transfers. Thank you very much n May 16, 2025 at 9:18 PM, Dariimaa/다리마/Ivancsa : Solved May 16, 2025 at 9:18 PM, Mohammad Amir : Thank you very much! May 16, 2025 at 9:26 PM, 이민재 : Solved May 16, 2025 at 9:27 PM, Mohammad Amir : Thank you very much! May 16, 2025 at 9:37 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 56 • Cathode: 81 Pre STK > VD • Anode: 14 • Cathode: 02 Post STK > Stacking • Anode: 96 • Cathode: 43 GF NC reel Available lot 4/5 line • AN: 272 • CA: 82 Thank you! May 16, 2025 at 10:31 PM, Ivan Kasian Sl 5L 🥹 : Please check the delivery of the cathode on the line 5-6 Stacking Dear @Mohammad Amir May 16, 2025 at 10:31 PM, Mohammad Amir : Checking May 16, 2025 at 10:34 PM, Mohammad Amir : This message was deleted. May 16, 2025 at 10:35 PM, Ivan Kasian Sl 5L 🥹 : P11 ,P07 and P03 have plate But I see empty agv stations stack May 16, 2025 at 10:36 PM, Ivan Kasian Sl 5L 🥹 : and there is very little cathode May 16, 2025 at 10:36 PM, Mohammad Amir : Everything seems fine. ✅ AGV#10,#7,#2 on the way for Line -5. Two materials job ha also created for Line -6. There are a lot of UR from Line -6 that's why AGVs are busy there as well. I am monitoring. Feel free to contact me again if you face any further issues. Thank you very much! May 16, 2025 at 10:37 PM, Ivan Kasian Sl 5L 🥹 : Got it, thank you very much Amir May 16, 2025 at 10:37 PM, Mohammad Amir : Yes at the moment there are also several UR jobs from line-6 that's why you witnessed delay In transfer for LR jobs. I am monitoring. Thank you very much! May 16, 2025 at 10:38 PM, Mohammad Amir : You are welcome! May 16, 2025 at 10:41 PM, Yulya Kirsanova : Hello. Agv#9 stopped with error near Staсking Line 6/11 Please check @fa Thank you so much. May 16, 2025 at 10:41 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKA72_C01 there is Travel First Movement Error. Thank you very much! May 16, 2025 at 10:41 PM, Dariimaa/다리마/Ivancsa : Solved May 16, 2025 at 10:41 PM, Dariimaa/다리마/Ivancsa : Solved May 16, 2025 at 10:42 PM, Yulya Kirsanova : Thank you so much 👍 May 16, 2025 at 10:52 PM, Simon Dávid D SL NC : @FA hello NC CA 51-es raktár error,megnéznétek köszönöm May 16, 2025 at 10:58 PM, Zsurbej Zsolt F.A. : Megyünk May 16, 2025 at 11:26 PM, Simon Dávid D SL NC : @FA hello NC Ca 5/2 magazin emelő lift error ,megnéznétek köszönöm May 16, 2025 at 11:31 PM, Simon Dávid D SL NC : @FA hello NC CA 5/2 #5AGV error ,megnéznétek köszönöm May 16, 2025 at 11:32 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 72 • Cathode: 105 Pre STK > VD • Anode: 08 • Cathode: 03 Post STK > Stacking • Anode: 90 • Cathode: 32 GF NC reel Available lot 4/5 line • AN: 276 • CA: 91 Thank you! May 16, 2025 at 11:55 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52_07_012 there is Run time error and it has blocked reels delivery. Thank you very much! May 17, 2025 at 12:23 AM May 17, 2025 at 12:23 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 101 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 105 • Cathode: 35 GF NC reel Available lot 4/5 line • AN: 280 • CA: 84 Thank you! May 17, 2025 at 12:50 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Please check C1CNV034_P35 there is Data Loss error and it is blocking stacking materials delivery. Please check the issue on priority. It will affect the production. Thank you very much! May 17, 2025 at 12:50 AM, Mohammad Amir : C1CNV072** May 17, 2025 at 12:54 AM, Dariimaa/다리마/Ivancsa : Solved May 17, 2025 at 12:54 AM, Mohammad Amir : Thank you very much! May 17, 2025 at 1:30 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Please check E0STKA51_M03 there is Data Loss Error. Thank you very much! May 17, 2025 at 1:36 AM, Tetiana SL/D : @fa please check AGV #3. It’s stuck near L3 19 machine. Thank you! May 17, 2025 at 1:51 AM, Zsurbej Zsolt F.A. : @ (MCS/RTD) We took out empty plate (MLC3214)from C0PVC020_08_042 port The plate handle is damaged! May 17, 2025 at 1:52 AM, Mohammad Amir : Checking May 17, 2025 at 1:53 AM, Mohammad Amir : Information has been updated ✅. Thank you very much for informing me. May 17, 2025 at 1:54 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Please check C1CNV034_P35 there is Data Loss error again and it is blocking stacking materials delivery. Please check the issue on priority. It will affect the production. Thank you very much! May 17, 2025 at 1:57 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 67 • Cathode: 100 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 105 • Cathode: 20 GF NC reel Available lot 4/5 line • AN: 307 • CA: 105 Thank you! May 17, 2025 at 2:08 AM, Dariimaa/다리마/Ivancsa : Solved May 17, 2025 at 2:09 AM, Mohammad Amir : Thank you very much! May 17, 2025 at 2:19 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA @Novák Károly F. A. Please check C1STKA72 _C01 there is ready off during Forking error and it has blocked the Anode stacking materials delivery. Please check the issue on priority. Thank you very much! May 17, 2025 at 2:28 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA @Zsurbej Zsolt F.A. Please check E0CNVA52_RTV01 there is Run time Over Error and Anode reels delivery for line-6 has stopped. Thank you very much! May 17, 2025 at 2:49 AM, Dariimaa/다리마/Ivancsa : @Mohammad Amir Please check the VD AN C1STKA72_P14 port. May 17, 2025 at 2:49 AM, Mohammad Amir : Checking May 17, 2025 at 2:50 AM, Mohammad Amir : Carrier has started to move ✅. And. Successfully stored in C2STKA72(0105503). Thank you very much! May 17, 2025 at 3:32 AM, 하연철(HA YEONCHEOL)/ : @FA C0PVC020 P13 It needs to be checked. It’s not working. May 17, 2025 at 3:37 AM, Mohammad Amir : The destination is C2NCC020_P04 and currently it is OOS that's why magazine MC4070 located at C0PVC020_P13 is not moving. @FA @Dariimaa/다리마/Ivancsa @CCS Please check C2NCC020_P04 it is OOS . Is there production on line -2? Please check why we are receiving Magazine Palletizefrequently from P13. First one received at 1:51 and job was already created at 1:52. However even after job creation, We received Magazine Palletize report on the following times again:- 1:53,2:08,2:15,2:37,2:40. Thank you very much! May 17, 2025 at 3:41 AM, Dariimaa/다리마/Ivancsa : No production on line 2 May 17, 2025 at 3:42 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check E0STKC51_C01 there is Ready off during Forking error. Thank you very much! May 17, 2025 at 3:45 AM, Mohammad Amir : I would like to inform you that it was an automatic job so it was created after receiving LR from NC CA line-2 -2 machine at 1:52. In this case ,should I cancel this job so that this Empty magazine can be used In the production lines. Thank you very much! May 17, 2025 at 3:50 AM, Dariimaa/다리마/Ivancsa : Yes. please cancel this job. Thank you! May 17, 2025 at 3:53 AM, Mohammad Amir : This message was deleted. May 17, 2025 at 3:55 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @하연철(HA YEONCHEOL)/ I would like to inform you that the Issue has been resolved ✅. Now magazine MC4070 loacted at C0PVC020_P13 will be successfully utilized in Production line -5-1_P03. I am monitoring. Thank you very much! May 17, 2025 at 3:55 AM, Dariimaa/다리마/Ivancsa : Thank you very much! May 17, 2025 at 3:56 AM, Mohammad Amir : You are welcome! May 17, 2025 at 4:20 AM, Ivan Kasian Sl 5L 🥹 : @fa check please agv#4 and #8 on line 5 stacking May 17, 2025 at 4:21 AM, Ivan Kasian Sl 5L 🥹 : Stopped while loading oven plate full to station agv May 17, 2025 at 4:21 AM, Ivan Kasian Sl 5L 🥹 : Thank you so much May 17, 2025 at 4:33 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 72 • Cathode: 93 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 113 • Cathode: 33 GF NC reel Available lot 4/5 line • AN: 335 • CA: 129 Thank you! May 17, 2025 at 4:46 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 17, 2025 at 4:56 AM, Ivan Chobitko : @MCS Please share available CA material count for L3 ST May 17, 2025 at 4:56 AM, Mohammad Amir : Sure , checking! May 17, 2025 at 4:57 AM, Mohammad Amir : Stacking materials available for Line-3:- Anode -01 Cathode -00 Thank you very much! May 17, 2025 at 4:59 AM, Ivan Chobitko : Thank you May 17, 2025 at 4:59 AM, Mohammad Amir : You are welcome! May 17, 2025 at 5:10 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it. Thank you very much! May 17, 2025 at 5:18 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Please check C1CNV072_16_088 there is Data Loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 17, 2025 at 5:21 AM, Dariimaa/다리마/Ivancsa : Solved May 17, 2025 at 5:22 AM, Mohammad Amir : Thank you very much! May 17, 2025 at 5:33 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 96 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 113 • Cathode: 27 GF NC reel Available lot 4/5 line • AN: 349 • CA: 129 Thank you very much! May 17, 2025 at 6:11 AM, duzzaman Md (MCS) : @FA Good morning! Please check C1CNV072_P35 DATA LOSS ERROR THANKS ! May 17, 2025 at 7:11 AM, QuangPhan : Hello! Good moring @FA NC AN 4/1 AGV #5 error. Thanks May 17, 2025 at 7:15 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 85 • Cathode: 117 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 116 • Cathode: 12 GF NC reel Available lot 4/5 line • AN: 349 • CA: 123 Thank you very much! May 17, 2025 at 8:57 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 93 • Cathode: 113 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 112 • Cathode: 10 GF NC reel Available lot 4/5 line • AN: 338 • CA: 136 Thank you very much! May 17, 2025 at 9:38 AM, QuangPhan : Hello! @FA NC AN AGV #9 error. Thanks May 17, 2025 at 10:12 AM, QuangPhan : Hello! Dear @FA @AGV. Could you please check AGV provide empty Mgz for NC AN 4/2. Empty mgz is out. Thank you. May 17, 2025 at 10:17 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 93 • Cathode: 107 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 132 • Cathode: 28 GF NC reel Available lot 4/5 line • AN: 361 • CA: 152 Thank you very much! May 17, 2025 at 10:57 AM, Kateryna SSL C : Hello! @duzzaman Md (MCS) Could you please cancel all LR for L3? Thank you! May 17, 2025 at 10:59 AM, duzzaman Md (MCS) : Stacking Line 3, right ? May 17, 2025 at 11:01 AM, Kateryna SSL C : Yes ~ May 17, 2025 at 11:03 AM, duzzaman Md (MCS) : Done. May 17, 2025 at 11:06 AM, duzzaman Md (MCS) : This message was deleted. May 17, 2025 at 11:37 AM, QuangPhan : Hello, Dear @Fa VD AN 5-8 #44 stopped temperature overheat Please send mgz warehouse, the technicians repair machine start. Thank you. May 17, 2025 at 11:42 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 93 • Cathode: 107 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 152 • Cathode: 44 GF NC reel Available lot 4/5 line • AN: 363 • CA: 148 Thank you very much! May 17, 2025 at 12:50 PM, T. Gàbornè C SL NC : @FA CA NC 4#3 AGV not move full mgz, please check. Thanks. May 17, 2025 at 12:52 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 76 • Cathode: 101 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 154 • Cathode: 52 GF NC reel Available lot 4/5 line • AN: 365 • CA: 161 Thank you very much! May 17, 2025 at 2:36 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 80 • Cathode: 94 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 154 • Cathode: 68 GF NC reel Available lot 4/5 line • AN: 356 • CA: 163 Thank you very much! May 17, 2025 at 2:54 PM, Lajos Gábor F.A. : @MCS E0CNVC52_RTV01 not moving with empty carrier LTC0460. Could you check it please? May 17, 2025 at 2:55 PM, duzzaman Md (MCS) : On it May 17, 2025 at 3:18 PM, Lajos Gábor F.A. : Thank for help! May 17, 2025 at 3:22 PM, duzzaman Md (MCS) : It lost it job, moving now. It had a abnormal scenario. While it was transferring, transfer completed with result code 6 , which means empty retrieval and it lost its job. May 17, 2025 at 4:21 PM, Nagy Tamás FA : @MCS E0CNVC52_RTV01 not moving with empty carrier LTC0295. Could you check it please? May 17, 2025 at 4:41 PM, duzzaman Md (MCS) : Still working on it. As it lost its job as well. But is not getting generated from MCS/RTD. Could you try from your side. May 17, 2025 at 4:43 PM, Nagy Tamás FA : Unfortunately we cannot give it a destination. May 17, 2025 at 4:45 PM, JAEYOON KIM / CS : Can you check the destination of the RTV? May 17, 2025 at 4:46 PM, duzzaman Md (MCS) : E0stkc52 May 17, 2025 at 4:52 PM, duzzaman Md (MCS) : Moving now. Thank you May 17, 2025 at 4:52 PM, Nagy Tamás FA : Thank you for help! May 17, 2025 at 4:53 PM, duzzaman Md (MCS) : Thanks for your patience too. Carriers are loosing job with a result code 6. May 17, 2025 at 5:05 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 78 • Cathode: 88 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 159 • Cathode: 66 GF NC reel Available lot 4/5 line • AN: 324 • CA: 169 Thank you very much! May 17, 2025 at 5:06 PM, Lajos Gábor F.A. : It happens again... LTC1038. Please help. May 17, 2025 at 5:07 PM, duzzaman Md (MCS) : On it May 17, 2025 at 5:09 PM, KIM SEYEON [김세연]_FA : why it happens? @duzzaman Md (MCS) May 17, 2025 at 5:11 PM, duzzaman Md (MCS) : Its moving now May 17, 2025 at 5:13 PM, Lajos Gábor F.A. : Thank you! May 17, 2025 at 5:27 PM, duzzaman Md (MCS) : From MCS side , it seems okay. We are always getting HCACK 0 or HCACK4 reply. In all the cases I found just after the transfer is initiated,there is interrail error. Port is going in and out of service. Like for the last carrier it was , it got 16:06 to 17:00. The it came back to in service and at the same time transport completed report occurred with result code 6 while staying on RTV. Result code 6 means Empty retrieval. This was the same for previous 2 carriers as well. May 17, 2025 at 5:35 PM, Sazzad Bhai SKon : As HCACK is 4, mcs is okay. @ccs please confirm the reason for RTV stopped. May 17, 2025 at 5:37 PM, Sazzad Bhai SKon : Resulcode 6 is destination error. We have faced the same error earlier. May 17, 2025 at 5:38 PM, Sazzad Bhai SKon : This was solution from @ccs, please try this May 17, 2025 at 5:49 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 87 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 159 • Cathode: 79 GF NC reel Available lot 4/5 line • AN: 330 • CA: 164 Thank you very much! May 17, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/13 Overtime (0):- Sick (1):Kiss Balázs Holiday (1): Magyar Balázs, Novák Károly Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs Modul(2): Martina Dávid,Nagy Gábor May 17, 2025 at 6:05 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 17, 2025 at 6:10 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 17 Time: 18:00~06:00 1. Samkoo Lee Minjae 2.Samkoo Choi Gisu May 17, 2025 at 6:12 PM, Shakir (MCS) : @FA Please check E0STKC52_C02 there is Load oversize error. Thank you May 17, 2025 at 6:20 PM, Shakir (MCS) : @FA Please check C1STKC71_P15/16, there Light curtain Error since 17:39. Thank you May 17, 2025 at 6:21 PM, 이민재 : Solved May 17, 2025 at 6:25 PM, 이민재 : Solved May 17, 2025 at 6:40 PM, 카스텔 발라지 F.A. : @Mohammad Amir Hello! C0PVC020_P12 is empty. Please delete MC3405 from there. Thank you very much! May 17, 2025 at 6:42 PM, Shakir (MCS) : Port Info has been updated now P12 is empty ✅ Thank you May 17, 2025 at 7:58 PM, 카스텔 발라지 F.A. : @Shakir (MCS) Please check LTC0409 tranfser history at the E0CNVC52. After the RTV took it, the transfer order disappeared. Command ID U202517193341046601-LTC0409 this error occurred at 19:39 Thank you very much! May 17, 2025 at 8:09 PM, Shakir (MCS) : There is Destination error with result code 6, we have faced the same error earlier, whenever carrier reached on RTV, we received Interrail-Transfer completed after that carrier not moving. Thank you May 17, 2025 at 8:10 PM, Shakir (MCS) : For more info ✅ May 17, 2025 at 8:12 PM, Shakir (MCS) : Please try this, if again same error occur. This was the solution for CCS. Thank you May 17, 2025 at 8:12 PM, Shakir (MCS) : From*CCS May 17, 2025 at 8:13 PM, 카스텔 발라지 F.A. : It didn't help, because without a transfer order, RTV doesn't move. I manually gave it a new order, which it executed perfectly. May 17, 2025 at 8:13 PM, Shakir (MCS) : Yes, Correct ✅ May 17, 2025 at 8:25 PM, KIM SEYEON [김세연]_FA : @카스텔 발라지 F.A. the issue solved? May 17, 2025 at 8:28 PM, Simon Dávid D SL NC : @FA hello NC CA COPVC020 error ,megnéznétek köszönöm May 17, 2025 at 8:28 PM, Shakir (MCS) : Operation is normalized now, Carrier started to move. Thank you May 17, 2025 at 8:30 PM, KIM SEYEON [김세연]_FA : @방혁 PM(Bang.Hyuk) FA 피엠님 @JAEYOON KIM / CS 매니저님 현상 발생시 해결방법 공유 부탁드립니다. May 17, 2025 at 8:30 PM, 카스텔 발라지 F.A. : yes, but this is only a temporary solution, if we quickly give the manual command to RTV, it will not stop without an error message. May 17, 2025 at 8:36 PM, 하연철(HA YEONCHEOL)/ : @FA C0PVC020 The machine stopped due to an error. Please take action May 17, 2025 at 8:51 PM, Simon Dávid D SL NC : @FA hello NC CA COPVC020 error ,megnéznétek köszönöm May 17, 2025 at 8:51 PM, 카스텔 발라지 F.A. : Dolgozunk rajta May 17, 2025 at 9:10 PM, 하연철(HA YEONCHEOL)/ : @FA Immediate action is needed as the warehouse stock is insufficient after the CA process. May 17, 2025 at 9:13 PM, 카스텔 발라지 F.A. : If we can't fix it, we'll take out the empty and full magazines. May 17, 2025 at 9:30 PM, Simon Dávid D SL NC : @FA hello NC Ca 4/2 AGV #1 error,megnéznétek köszönöm May 17, 2025 at 9:45 PM, 김태헌 : ST OUT P11 AGV #3 Light curtain error please check May 17, 2025 at 9:50 PM, 김태헌 : ST OUT P11 AGV #10 Same alarm occurs again May 17, 2025 at 9:51 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 94 • Cathode: 88 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 129 • Cathode: 83 GF NC reel Available lot 4/5 line • AN: 321 • CA: 165 Thank you very much! May 17, 2025 at 11:19 PM, Shakir (MCS) : Hello Sir, Please find below additional details regarding the issue that occurred with the carriers, along with the corresponding time, to assist in further analysis: 16/05 LTC0984 at 09:01 – The carrier was not moved from RTV for a long time and no error was reported until a manual job was created. LTC1638 at 10:57 LTC0984 at 11:58 Today | 17/05 LTC0469 at 14:41 LTC0295 at 16:10 LTC1038 at 17:00 LTC0409 at 19:39 The issue occurred with these carriers. Thank you May 17, 2025 at 11:20 PM, Shakir (MCS) : Additionally The issue occurred with these carriers. Normally, we receive the message: “Interrail - Carrier location changed” upon arrival at RTV. However, in these cases, we received: “Interrail - Transfer completed”, after which the carrier remained idle until a manual job was assigned. This delay subsequently impacted other jobs as well. Thank you May 17, 2025 at 11:30 PM, Tetiana SL/D : Hello. Agv#9 stopped with error near Staсking Line 6/3 Please check @fa Thank you so much! May 17, 2025 at 11:39 PM, 김지수PM(Gyuri)_FA : This message was deleted. May 18, 2025 at 12:02 AM May 18, 2025 at 12:02 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 103 • Cathode: 87 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 122 • Cathode: 83 GF NC reel Available lot 4/5 line • AN: 340 • CA: 187 Thank you very much! May 18, 2025 at 12:35 AM, Simon Dávid D SL NC : @FA hello NC CA COPV030 #3 robot error,megnéznétek,köszönöm May 18, 2025 at 1:26 AM, 김태헌 : This message was deleted. May 18, 2025 at 1:27 AM, 김태헌 : ST AGV conveyer Successive tray errors occur when manually entering the tray Please check May 18, 2025 at 1:40 AM, Shakir (MCS) : It seems the stacking process was not completed for MA3243 so there was a buzzer (StackingStart magazine found) at C1CNV072_M02. Thank you May 18, 2025 at 1:42 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 106 • Cathode: 78 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 134 • Cathode: 78 GF NC reel Available lot 4/5 line • AN: 355 • CA: 212 Thank you very much! May 18, 2025 at 2:22 AM, Mezhenskiy : Hello, we need help. C1CNV072-CV01-MCP . Tray Data Mismatch Error. @fa May 18, 2025 at 3:20 AM, Zsurbej Zsolt F.A. : @ (MCS/RTD) We took out plate (MLC2098,MC4267,MC1494,MC1071,MC2268,MC1355,MC1186)from C1CNV071_13_028 port The plate handle is damaged! May 18, 2025 at 3:52 AM, Jun(정우준)_SKOH FA : @Shakir (MCS) Can you make new command for GF CA ST AGV4 to C1CNV072_P10? May 18, 2025 at 3:56 AM, Shakir (MCS) : Job has been initiated ✅ AGV started to Move Thank you May 18, 2025 at 3:58 AM, Shakir (MCS) : AGV successfully Unload the carrier at P10. Thank you May 18, 2025 at 3:59 AM, Jun(정우준)_SKOH FA : thank you May 18, 2025 at 5:57 AM, QuangPhan : Hello! Good morning NC AN 6/2 AGV#4 error. Thanks May 18, 2025 at 6:13 AM, duzzaman Md (MCS) : @FA Please check C1STKC71_C02 More than a combination of lifting and lowering sensors. Thank you May 18, 2025 at 6:16 AM, Dariimaa/다리마/Ivancsa : Solved May 18, 2025 at 6:17 AM, duzzaman Md (MCS) : Thank you. Have a wonderful day ahead. May 18, 2025 at 6:22 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.18 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assey GF OH Eunhyang 1F Kim Jongwon May 18, 2025 at 6:43 AM, duzzaman Md (MCS) : @FA Please check E0STKC52_C02 there is fork 2 driver error Thank you May 18, 2025 at 6:51 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 124 • Cathode: 82 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 108 • Cathode: 80 GF NC reel Available lot 4/5 line • AN: 05 • CA: 1206 Thank you very much! May 18, 2025 at 6:56 AM, 이도형 (Lee) : @FA NC CA #6 AGV ERROR. Please check. May 18, 2025 at 6:59 AM, Dima Kusyk : @fa Good morning everyone! Line 5/STK AGV #4 stopped near STK14. Please check. May 18, 2025 at 7:34 AM, T. Gàbornè C SL NC : @Fa Please check CA Robot #3 MGZ detected sensor error Thx May 18, 2025 at 7:52 AM, T. Gàbornè C SL NC : @Fa Please check CA 5#3 full mgz no move AGV and 5-6 line no move AGV empty mgz . Thx May 18, 2025 at 8:05 AM, T. Gàbornè C SL NC : @Fa Please check AGV no move empty MGZ 4 line CA. Thx May 18, 2025 at 8:20 AM, T. Gàbornè C SL NC : @FA please help CA 6#3 mgz full, no move AGV. Thx May 18, 2025 at 8:23 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 119 • Cathode: 96 Pre STK > VD • Anode: 14 • Cathode: 02 Post STK > Stacking • Anode: 85 • Cathode: 55 GF NC reel Available lot 4/5 line • AN: 335 • CA: 224 Thank you very much! May 18, 2025 at 8:46 AM, T. Gàbornè C SL NC : @MCS I ask for your help, change priority, CA NC 4-5-6 lines, the full mgz transportation slowed down. Every row is waiting for AGV to take the full mgz. Thank you very much May 18, 2025 at 8:51 AM, 이도형 (Lee) : @FA PM님 양극 4~6라인 풀매거진 LR 확인 부탁드립니다 May 18, 2025 at 8:53 AM, duzzaman Md (MCS) : Increased the priorities. However, it seems AGV issues are delaying the jobs May 18, 2025 at 8:54 AM, KIM SEYEON [김세연]_FA : AGV 이슈는 없는데, 로봇포트2번이 죽어있어서 좀 느린겁니다. May 18, 2025 at 8:54 AM, KIM SEYEON [김세연]_FA : 로봇포트 2번 리커버리 할겁니다. May 18, 2025 at 8:59 AM, 은향(OH EUN HYANG) : SkCNC 로봇포트#2 조치완료(08;58)로봇 가동 중입니다 May 18, 2025 at 9:21 AM, T. Gàbornè C SL NC : @Fa please check CA AGV #1 , align sw limit. Thx May 18, 2025 at 9:37 AM, duzzaman Md (MCS) : @FA Please check E0STKC52_C02 there is fork 2 driver error Thank you May 18, 2025 at 9:40 AM, T. Gàbornè C SL NC : @FA please help me, waiting empty mgz the line. Thank you. CA 4/1 -2-3 5-1, 5-3 6-1, 6-3 May 18, 2025 at 10:02 AM, 이도형 (Lee) : 동일 증상 발생입니다. 이상없는데 속도가 느린거죠? May 18, 2025 at 10:03 AM, 이도형 (Lee) : @FA NC An #10 AGV ERROR. Please check. May 18, 2025 at 10:12 AM, T. Gàbornè C SL NC : @Fa @MCS information GF NC CA side, look forward to AGV to unpack full mgz or bring empty mgzt. 4/1 9:06- 4/2 10:04- 4/3 9:36- 5/1 8:54-9:59 5/2 9:58- 6/2 10:05- 6/3 9:43-9:52 May 18, 2025 at 10:23 AM, duzzaman Md (MCS) : From MCS side its good. There are active jobs. And there is HCACK 0 or HCACK 4 reply. May 18, 2025 at 10:35 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 134 • Cathode: 111 Pre STK > VD • Anode: 21 • Cathode: 02 Post STK > Stacking • Anode: 75 • Cathode: 80 GF NC reel Available lot 4/5 line • AN: 310 • CA: 225 Thank you very much! May 18, 2025 at 10:45 AM, T. Gàbornè C SL NC : @MCS CA 4/1. 9:06 stoped, waiting transfer full mgz move. Please check. Thank you. May 18, 2025 at 11:00 AM, duzzaman Md (MCS) : P01 & P02 is OOS there is no UR. Alos, MC5547 is there at P02 which was cancelled at 9:36 MC1438 is in P01, this too was cancelled in 09:51. This is the overall scenario. May 18, 2025 at 11:19 AM, 정은탁 (Jung EunTak) : @KIM SEYEON [김세연]_FA AGV 7대의 Job이 꼬여서 LR UR 모두 불가능한 상태로 현재 SK CNC에서 복구중입니다. May 18, 2025 at 11:22 AM, T. Gàbornè C SL NC : GF NC CA side, look forward to AGV to unpack full mgz or bring empty mgzt. 4/1 9:06-11:14 runing 4/2 10:04-10:13. 11:07- stop 4/3 9:36-10:08 10:25-10:52 running 5/1 8:54-9:59 10:29-stop 5/2 9:58-stop 5/3 11:18-stop 6/1 10:14- stop 6/2 10:05-10:26 running 6/3 9:43-9:52 10:03-stop May 18, 2025 at 11:23 AM, T. Gàbornè C SL NC : @fa CA 4#1-hez gyertek légyszíves, kitöltési hiba van. Köszönöm szépen May 18, 2025 at 12:36 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot May 18, 2025 at 12:39 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 132 • Cathode: 122 Pre STK > VD • Anode: 27 • Cathode: 01 Post STK > Stacking • Anode: 71 • Cathode: 86 GF NC reel Available lot 4/5 line • AN: 296 • CA: 250 Thank you very much! May 18, 2025 at 1:10 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please delete c0mpc010-mp02 data May 18, 2025 at 1:10 PM, KIM SEYEON [김세연]_FA : This message was deleted. May 18, 2025 at 1:10 PM, KIM SEYEON [김세연]_FA : mc1003 May 18, 2025 at 1:10 PM, 김주연 : MC1003. We removed it May 18, 2025 at 1:14 PM, duzzaman Md (MCS) : It has been removed. Thank you May 18, 2025 at 3:48 PM, T. Gàbornè C SL NC : @FA Please check CA VD 4_04 work finised, QC OK but AGV no move the plate in the Storage. Thank you for much. May 18, 2025 at 3:54 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 135 • Cathode: 112 Pre STK > VD • Anode: 21 • Cathode: 01 Post STK > Stacking • Anode: 79 • Cathode: 71 GF NC reel Available lot 4/5 line • AN: 287 • CA: 236 Thank you very much! May 18, 2025 at 4:08 PM, T. Gàbornè C SL NC : @MCS Please check the C5NCC020_P02 output for CA NC 5#2, AGV does not unpack. Thank you. May 18, 2025 at 4:15 PM, duzzaman Md (MCS) : We received UR successfull. Job was also created. But it was cancelled by Operator at 11:24 Magazine no MC1557 Please press UR again. Thanks ! May 18, 2025 at 5:21 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 132 • Cathode: 109 Pre STK > VD • Anode: 17 • Cathode: 03 Post STK > Stacking • Anode: 87 • Cathode: 66 GF NC reel Available lot 4/5 line • AN: 281 • CA: 230 Thank you very much! May 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13+1 Overtime Overtime (1): Denkó János Sick (2):Kiss Balázs, Magyar Balázs Holiday (0):- Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(6): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Novák Károly Modul(3): Martina Dávid, Nagy Gábor, Denkó János May 18, 2025 at 6:03 PM, 방혁 PM(Bang.Hyuk) FA : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. BANG HYUK 2.KIM JI SOO 3.JUNG WOO JUN May 18, 2025 at 6:12 PM, 이민재 : This message was deleted. May 18, 2025 at 6:13 PM, 이민재 : Night Shift FA Technician Schedule Date: 25. May. 18 Time: 18:00~06:00 1. Samkoo Lee Minjae 2.Samkoo Choi Gisu May 18, 2025 at 6:22 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 135 • Cathode: 106 Pre STK > VD • Anode: 22 • Cathode: 01 Post STK > Stacking • Anode: 80 • Cathode: 71 GF NC reel Available lot 4/5 line • AN: 272 • CA: 224 Thank you very much! May 18, 2025 at 6:23 PM, KIM SEYEON [김세연]_FA : 05.18 Night shift GF- Nandin Amgaa 1F- Badmaa Chingis May 18, 2025 at 7:28 PM, Shakir (MCS) : @FA Please check Port C1STKC71_P19 Port, STK showing UNK carrier at this port, MLC3041 not moving showing Output H/S off error. Job getting delayed for VD 4-1 Thank you May 18, 2025 at 7:38 PM, Shakir (MCS) : @Amgaa FA May 18, 2025 at 7:44 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 136 • Cathode: 104 Pre STK > VD • Anode: 35 • Cathode: 00 Post STK > Stacking • Anode: 63 • Cathode: 75 GF NC reel Available lot 4/5 line • AN: 266 • CA: 225 Thank you very much! May 18, 2025 at 8:08 PM, Tetiana SL/D : Hello. Agv#9 stopped with error near Staсking Line 6/4 Please check @fa Thank you so much! May 18, 2025 at 9:00 PM, Lan Nhi : @FA hello. plz check for me. agv 6 is having error on machine 6/2 An. thanks May 18, 2025 at 9:31 PM, Shakir (MCS) : @FA @Amgaa FA Please check this Thank you May 18, 2025 at 9:35 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 141 • Cathode: 103 Pre STK > VD • Anode: 23 • Cathode: 00 Post STK > Stacking • Anode: 66 • Cathode: 66 GF NC reel Available lot 4/5 line • AN: 257 • CA: 207 Thank you very much! May 18, 2025 at 9:44 PM, N.Zoli F.A. : I replaced the data, please generate a new command for it May 18, 2025 at 9:56 PM, 방혁 PM(Bang.Hyuk) FA : @MCS PLS MAKE COMMAND FOR ST AGV 9 May 18, 2025 at 9:56 PM, Shakir (MCS) : Please check carrier MLC4193 located at P19 in STK but MCS port is empty. Carrier MLC4103 at P20 and MLC3041 at 19 assigned for VD 4-1 but different carrier showing in SCS at P19 that’s why It is not moving Thank you May 18, 2025 at 9:57 PM, Shakir (MCS) : CA or AN May 18, 2025 at 9:57 PM, 방혁 PM(Bang.Hyuk) FA : CA May 18, 2025 at 9:59 PM, 방혁 PM(Bang.Hyuk) FA : AGV09 TO C1CNV072_P10 or P09 May 18, 2025 at 10:01 PM, Shakir (MCS) : Job has been initiated for P05 AGV started to move ✅ Thank you May 18, 2025 at 10:13 PM, Simon Dávid D SL NC : @FA hello NC CA C0PVC020 error ,megnéznétek köszönöm May 18, 2025 at 10:17 PM, Zsurbej Zsolt F.A. : Megyünk May 18, 2025 at 10:18 PM, N.Zoli F.A. : C1STKC71 P19 port contains the MLC4193 plate May 18, 2025 at 10:23 PM, Shakir (MCS) : There is MES error with this carrier, showing Carrier that does not exist in the system. Carrier data remove at 16:26. May 18, 2025 at 10:29 PM, N.Zoli F.A. : Working on it May 18, 2025 at 10:44 PM, Shakir (MCS) : Issue has been resolved ✅ AGV03 on the way to VD 4-1 Thank you May 18, 2025 at 11:41 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 144 • Cathode: 102 Pre STK > VD • Anode: 15 • Cathode: 01 Post STK > Stacking • Anode: 71 • Cathode: 61 GF NC reel Available lot 4/5 line • AN: 262 • CA: 237 Thank you very much! May 19, 2025 at 12:38 AM May 19, 2025 at 12:38 AM, Simon Dávid D SL NC : @FA hello NC Ca COPVC020 error ,megnéznétek köszönöm May 19, 2025 at 2:31 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 133 • Cathode: 96 Pre STK > VD • Anode: 18 • Cathode: 03 Post STK > Stacking • Anode: 63 • Cathode: 71 GF NC reel Available lot 4/5 line • AN: 256 • CA: 227 Thank you very much! May 19, 2025 at 2:38 AM, 김태헌 : This message was deleted. May 19, 2025 at 2:39 AM, 김태헌 : ST 6L #4 AGV is repeating the same action and error occurs. Please check. May 19, 2025 at 2:46 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 DATA LOSS ERROR. Thank you May 19, 2025 at 3:16 AM, Ivan Chobitko : @mcs Hello Could you tell me please, for which machine was assigned plate MLC4204 Few min ago this plate was taken from CNV72 port P11 May 19, 2025 at 3:18 AM, Ivan Chobitko : I found it, thanks May 19, 2025 at 3:18 AM, Ivan Chobitko : Sorry for disturbing May 19, 2025 at 3:20 AM, Shakir (MCS) : No problem Feel free to contact me if you face any further issues. Thank you May 19, 2025 at 3:48 AM, Zsurbej Zsolt F.A. : @(MCS) Hello! C0PVA030_P13 is empty. Please delete MA1496 from there. Thank you very much! May 19, 2025 at 3:49 AM, Shakir (MCS) : Done ✅ Thank you May 19, 2025 at 4:10 AM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. May 19, 2025 at 4:31 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 140 • Cathode: 98 Pre STK > VD • Anode: 18 • Cathode: 03 Post STK > Stacking • Anode: 62 • Cathode: 63 GF NC reel Available lot 4/5 line • AN: 254 • CA: 224 Thank you very much! May 19, 2025 at 4:49 AM, 하연철(HA YEONCHEOL)/ : C1CNV071 It needs to be checked. @fA May 19, 2025 at 5:17 AM, 하연철(HA YEONCHEOL)/ : C0PVC030 Robot Movement Error @FA May 19, 2025 at 5:27 AM, Zsolt F.A. : @mcs Please delte tray MLC3208. We had to take it out of production. Bent handle. Thank you May 19, 2025 at 5:38 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 138 • Cathode: 96 Pre STK > VD • Anode: 10 • Cathode: 01 Post STK > Stacking • Anode: 69 • Cathode: 61 GF NC reel Available lot 4/5 line • AN: 258 • CA: 238 Thank you very much! May 19, 2025 at 6:05 AM, Andrea Zentay : Good morning, NC CA #2 AGV check please. Thank you May 19, 2025 at 6:13 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 140 • Cathode: 98 Pre STK > VD • Anode: 21 • Cathode: 00 Post STK > Stacking • Anode: 60 • Cathode: 56 GF NC reel Available lot 4/5 line • AN: 258 • CA: 237 Thank you very much! May 19, 2025 at 6:37 AM, Khaliun/Ivancsa FA : @MCS GF VD CA 4/8 chamber is closed, so please delete the AGV#3 job. May 19, 2025 at 6:38 AM, Mohammad Amir : Good morning, Checking! May 19, 2025 at 6:38 AM, Mohammad Amir : As requested all jobs have been cancelled successfully ✅ Thank you very much! May 19, 2025 at 6:40 AM, Khaliun/Ivancsa FA : Thank you. May 19, 2025 at 6:40 AM, Mohammad Amir : You are welcome! May 19, 2025 at 7:09 AM, 동현 invited 박시우. May 19, 2025 at 7:49 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 135 • Cathode: 98 Pre STK > VD • Anode: 43 • Cathode: 03 Post STK > Stacking • Anode: 39 • Cathode: 50 GF NC reel Available lot 4/5 line • AN: 222 • CA: 220 Thank you very much! May 19, 2025 at 8:07 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check E0CNVA52_RTV01 there is lift load dest port auto off Alaram ,Reels delivery has been stopped. Thank you very much! May 19, 2025 at 8:28 AM, Sazzad Bhai SKon : Good morning, @FA Please check the following UNKDUP carriers. Plate1: UNKDUP-MLC4188 (C1STKC72, 0105904) Plate2: UNKDUP-MLC4193 (C1STKC71, 0205403) Thank you May 19, 2025 at 8:54 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 147 • Cathode: 104 Pre STK > VD • Anode: 12 • Cathode: 01 Post STK > Stacking • Anode: 56 • Cathode: 63 GF NC reel Available lot 4/5 line • AN: 191 • CA: 220 Thank you very much! May 19, 2025 at 8:56 AM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1STKC71_C01 there is Light curtain error. Thank you very much! May 19, 2025 at 8:59 AM, Mohammad Amir : @Csuti Zoltán F.A Please check this issue. Thank you very much! May 19, 2025 at 9:00 AM, Khaliun/Ivancsa FA : Solved May 19, 2025 at 9:04 AM, Sazzad Bhai SKon : Please restock the plate. What was the actual plate id? Is it MLC4188? May 19, 2025 at 9:11 AM, Khaliun/Ivancsa FA : STK72 MLC4188 May 19, 2025 at 9:11 AM, Khaliun/Ivancsa FA : STK71 MLC4193 May 19, 2025 at 9:12 AM, Sazzad Bhai SKon : This message was deleted. May 19, 2025 at 9:12 AM, Sazzad Bhai SKon : Are these still on the manual port? If yes then we need to check further, because the plate might be duplicated May 19, 2025 at 9:14 AM, Khaliun/Ivancsa FA : They are not moving on the manual gate. May 19, 2025 at 9:16 AM, Sazzad Bhai SKon : I understand, because MLC4193 is stacking material. So it must be in putted from post VD STK 72. May 19, 2025 at 9:16 AM, Csuti Zoltán F.A : yes it is still on manual port May 19, 2025 at 9:17 AM, Sazzad Bhai SKon : But before moving them on STK 72, could you please help me? May 19, 2025 at 9:18 AM, Sazzad Bhai SKon : Please check C1STKC72 (0200102) , there is a duplicate plate UNKDUP-MLC4193-20250519 We need to check this carrier before storing the first plate. Please May 19, 2025 at 9:43 AM, Elena Dzhul : Hello!AGV#1 stopped L4/Stk#5, please check May 19, 2025 at 9:44 AM, Sazzad Bhai SKon : @Khaliun/Ivancsa FA @Csuti Zoltán F.A May 19, 2025 at 9:48 AM, KIM SEYEON [김세연]_FA : @Khaliun/Ivancsa FA @Zulaa/졸라/Ivancsa FA please check stacking line 4 agv 1 alarm May 19, 2025 at 9:49 AM, Mohammad Amir : @Manufacturing @Ivan Chobitko @Ivan Kasian Sl 5L 🥹 Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 19, 2025 at 10:06 AM, Khaliun/Ivancsa FA : Sorry, I don't know why, but there's an MCS buzzer error. May 19, 2025 at 10:08 AM, Sazzad Bhai SKon : MLC4193 is a stacking material, so the material must be in put from post VD STK 72 manual port May 19, 2025 at 10:09 AM, Khaliun/Ivancsa FA : Okay, I understand. May 19, 2025 at 10:13 AM, Sazzad Bhai SKon : But before proceeding with this please check "Please check C1STKC72 (0200102) , there is a duplicate plate UNKDUP-MLC4193-20250519 We need to check this carrier before storing the first plate. " May 19, 2025 at 10:21 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 165 • Cathode: 118 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 65 • Cathode: 52 GF NC reel Available lot 4/5 line • AN: 188 • CA: 209 Thank you very much! May 19, 2025 at 10:23 AM, Andrea Zentay : @MCS @FA We need help. Production has started on Line2 at NC CA. The AGV are currently not bringing empty magazines and not delivering full ones. Please take a look. Thank you. May 19, 2025 at 10:23 AM, Mohammad Amir : Checking May 19, 2025 at 10:29 AM, Mohammad Amir : Currently there is One job AGV#7 taking full magazine from NC CA 2-2 . Currently 2-1 is OOS . And for 2-2 and 2-3 we did not receive any new LR for empty magazine, Please press LR for machine where you would like to receive empty magazine. I am monitoring. Thank you very much! May 19, 2025 at 10:33 AM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check E0CNVC52_RTV01 there is Data mismatch error and it has blocked the CA reels delivery. Thank you very much! May 19, 2025 at 10:36 AM, Mohammad Amir : @Andrea Zentay LR received successfully for 2-2 at 10:31. Empty magazine on the way to 2-2 CA NC _P04 . ✅ Thank you very much! May 19, 2025 at 10:50 AM, Nguyên : AN VD GF 46(6-1) AGV does not deliver goods. Please check for me. May 19, 2025 at 10:50 AM, Mohammad Amir : Checking May 19, 2025 at 10:52 AM, Mohammad Amir : Please confirm all the carriers located at this chamber(6-1 AN VD). Thank you very much! May 19, 2025 at 10:59 AM, Mohammad Amir : @Nguyên Please provide me confirmation on this ,there is an issue that's why AGVs is not unpacking this chamber. Thank you very much! May 19, 2025 at 11:13 AM, Nguyên : it is no problem. but AGV does not come to pick up the goods May 19, 2025 at 11:17 AM, Mohammad Amir : Please inform me , The carrier ids located in all chambers of 6-1 VD AN. UR is getting failed that's why AGV doesn't come to pick up the goods. Thank you very much! May 19, 2025 at 12:14 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 163 • Cathode: 121 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 66 • Cathode: 62 GF NC reel Available lot 4/5 line • AN: 155 • CA: 228 Thank you very much! May 19, 2025 at 12:58 PM, Mohammad Amir : @Nguyên Please provide me the Carrier IDs exists at 6-1 VD AN. This issue still exists that's why Unload Request are getting failed. Thank you very much! May 19, 2025 at 1:04 PM, Nguyên : I just went out for lunch. I will give it to you later. May 19, 2025 at 1:04 PM, Mohammad Amir : Okay thank you very much! May 19, 2025 at 1:29 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 158 • Cathode: 127 Pre STK > VD • Anode: 04 • Cathode: 01 Post STK > Stacking • Anode: 54 • Cathode: 51 GF NC reel Available lot 4/5 line • AN: 158 • CA: 214 Thank you very much! May 19, 2025 at 1:38 PM, Nguyên : There is a wrong Balette code. That is why AGV Cannot pick up the goods. May 19, 2025 at 1:41 PM, Mohammad Amir : Unload Request are getting failed because for C6VDA010_P01 there is carrier location mismatched. Could you tell me which carrier actually located at P01 ,is it MLA6107? Thank you very much! May 19, 2025 at 1:44 PM, Sazzad Bhai SKon : @FA please confirm the plate ID from P01. We will update the information manually from MCS May 19, 2025 at 1:58 PM, Nguyên : Yes May 19, 2025 at 2:00 PM, Mohammad Amir : @Nguyên thank you very much for the confirmation. Information is up to date ✅. For VD AN 6-1 for P01 we are receiving Magazine MA4506 id while unloading instead of carrier id MLA6107. That is the reason UR is getting failed still. @FA @Khaliun/Ivancsa FA Could you please manually trasfer the carrier located at P01(MLA6107) and P02(MLA6092) VD AN 6-1 to warehouse. Thank you very much! May 19, 2025 at 2:01 PM, Nguyên : Yes May 19, 2025 at 2:10 PM, Mohammad Amir : @FA Please check C1CNV072_M02 there is Data Mismatch error. Thank you very much! May 19, 2025 at 2:21 PM, Mohammad Amir : This issue has been resolved ✅ Now chamber 6-1 VD AN is empty . Feel free to contact me again if you need any further assistance. Thank you very much! May 19, 2025 at 2:38 PM, Mohammad Amir : @FA @Csuti Zoltán F.A Please check E0STKA52_C02 there is Hoist First Movement Error. Thank you very much! May 19, 2025 at 2:54 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 159 • Cathode: 127 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 54 • Cathode: 42 GF NC reel Available lot 4/5 line • AN: 126 • CA: 219 Thank you very much! May 19, 2025 at 3:08 PM, Sazzad Bhai SKon : @FA MLC4188 is duplicated in two locations. Please confirm their actual ID. Plate 1: MLC4188 (C1STKC72, 0105702) Plate 2: UNKDUP-MLC4188 (C1STKC72, 0200201) May 19, 2025 at 3:12 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 19, 2025 at 3:33 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1STKA71_P05 there is Data mismatch error and it has slowed down the empty magazine delivery speed. Thank you very much! May 19, 2025 at 4:06 PM, Khaliun/Ivancsa FA : @MCS GF VD CA 6/8 chamber is closed, so please delete the AGV#8 job. May 19, 2025 at 4:07 PM, Mohammad Amir : Checking May 19, 2025 at 4:08 PM, Mohammad Amir : I have successfully cancelled the jobs ✅. Please send the carriers located at AGV#6 and AGV#8 back to STK as these AGVs are now ideal without jobs. Thank you very much! May 19, 2025 at 4:09 PM, Khaliun/Ivancsa FA : Okey May 19, 2025 at 4:11 PM, Khaliun/Ivancsa FA : Solved May 19, 2025 at 4:37 PM, Khaliun/Ivancsa FA : @MCS GF VD CA 6/2 chamber is closed.Please check. May 19, 2025 at 4:38 PM, Mohammad Amir : Checking May 19, 2025 at 4:39 PM, Mohammad Amir : There is a job for half chamber ,AGV#6 is having the materials. Should I cancel these jobs? Thank you very much! May 19, 2025 at 4:40 PM, Mohammad Amir : Thank you very much @Khaliun/Ivancsa FA for confirmation. I have successfully cancelled the jobs ✅. Please send the carriers located at AGV#6 back to STK as this AGV is now ideal without jobs. Thank you very much! May 19, 2025 at 4:42 PM, Khaliun/Ivancsa FA : Thank you, the problem is solved. May 19, 2025 at 4:43 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 163 • Cathode: 117 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 60 • Cathode: 48 GF NC reel Available lot 4/5 line • AN: 110 • CA: 225 Thank you very much! May 19, 2025 at 4:43 PM, Mohammad Amir : You are welcome. Feel free to contact me again if you have any other queries. May 19, 2025 at 4:49 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1STKC71_P22 it is OOS since 16:32 that's why materials recovery has been stopped and there is queue of materials on the recovery CNV. Thank you very much! May 19, 2025 at 4:54 PM, Khaliun/Ivancsa FA : Checking May 19, 2025 at 5:23 PM, Khaliun/Ivancsa FA : Solved May 19, 2025 at 5:23 PM, Mohammad Amir : Thank you very much 🙏 May 19, 2025 at 5:32 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 167 • Cathode: 114 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 59 • Cathode: 47 GF NC reel Available lot 4/5 line • AN: 101 • CA: 225 Thank you very much! May 19, 2025 at 5:54 PM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.05.19 "B" műszak, 11+1/12+1 Tech, 1Sl Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Denkó János --------------- Sup May 19, 2025 at 6:03 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please check GF NC AN robot May 19, 2025 at 6:07 PM, VK (mcs) : @FA Please check Anode reel STK A52 There is no error but cranes are stopped. May 19, 2025 at 6:14 PM, 김태헌 : ST AGV conveyor data mismatch error alarm, no conveyor movement, please check. May 19, 2025 at 6:21 PM, 이민재 : Solved May 19, 2025 at 6:21 PM, Yon Ko/연커/ : Already solved. We kindly request that the operators working on the line refrain from deleting any commands without prior approval. May 19, 2025 at 6:45 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16050) MLC3237 is not moving. May 19, 2025 at 6:48 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 19, 2025 at 6:48 PM, Yon Ko/연커/ : Im on my way May 19, 2025 at 6:51 PM, Yon Ko/연커/ : Solved May 19, 2025 at 6:53 PM, KIM SEYEON [김세연]_FA : thanks May 19, 2025 at 7:04 PM, VK (mcs) : @FA Please check Anode and cathode reel conveyor E0CNVC52 unit(9008) Data loss error. RTV : laser sensor fault E0CNVA52 (7036)(7009) Light curtain error. May 19, 2025 at 7:32 PM, VK (mcs) : @FA Please check Anode Post -STK A72 Ports 7 & 8 Light curtain error. May 19, 2025 at 7:37 PM, Yon Ko/연커/ : We working on it :) May 19, 2025 at 7:48 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 175 • Cathode: 125 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 62 • Cathode: 40 GF NC reel Available lot 4/5 line • AN: 103 • CA: 219 May 19, 2025 at 7:55 PM, 김주연 : @FA 노칭양극agv4호기 지금 노칭2호기 p04에 언로딩하고 있나요? May 19, 2025 at 8:04 PM, M.Ferenc "B"Nc/Vd SL : @FA The lower right plate from machine VD CA #39(5-3) was not transported by AGV to warehouse 72. Please check. May 19, 2025 at 8:22 PM, M.Ferenc "B"Nc/Vd SL : On NC Cathode side, AGVs stopped at Line 5-6. They are not loading empty magazine and not transporting full magazine. Please check. May 19, 2025 at 8:25 PM, VK (mcs) : @Yon Ko/연커/ Please check it out. AGVs are frozen. May 19, 2025 at 8:28 PM, 이한웅(삼구) : Ca VD 2-5(#14) 하프 챔버 확인 부탁드립니다. @방혁 PM(Bang.Hyuk) FA May 19, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir is ca vd 2-5 has kr? May 19, 2025 at 8:32 PM, KIM SEYEON [김세연]_FA : lr? it is half chamber May 19, 2025 at 8:33 PM, VK (mcs) : Checking May 19, 2025 at 8:33 PM, Debreczeni Ármin : #agv9 stopped at line 6 May 19, 2025 at 8:37 PM, 이한웅(삼구) : please check NC Ca #4 AGV May 19, 2025 at 8:38 PM, VK (mcs) : Transport job requested for ports 1 and 2 at 7:51 Currently there is only LR for port 4 May 19, 2025 at 8:40 PM, KIM SEYEON [김세연]_FA : do you check the reason? May 19, 2025 at 8:44 PM, 김지수PM(Gyuri)_FA : This message was deleted. May 19, 2025 at 8:45 PM, Selem /Ivancsa FA : Solved May 19, 2025 at 8:47 PM, VK (mcs) : This message was deleted. May 19, 2025 at 8:49 PM, 김희용 : @이한웅(삼구) 로드리퀘스트 한번 다시 올려봐주실 수 있나요? May 19, 2025 at 8:49 PM, VK (mcs) : I checked load request for that machine for last month 05.08 load request received at 22:38:50 but It seems RTD received unload complete report form MES for port 3 after receiving load request. May 19, 2025 at 8:51 PM, VK (mcs) : We received unload complete report after receiving LR for port 3. Please apply LR again for empty ports or send the carriers to Post-STK and apply LR for all ports.thx May 19, 2025 at 8:58 PM, 이한웅(삼구) : 다시 올렸습니다. May 19, 2025 at 9:04 PM, 하연철(HA YEONCHEOL)/ : NC CA #4 AGV It stopped again at the same place. 2-2 Port4 @FA May 19, 2025 at 9:04 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check May 19, 2025 at 9:06 PM, 이한웅(삼구) : Please check the LR again. May 19, 2025 at 9:07 PM, VK (mcs) : LR received at 20:58 May 19, 2025 at 9:14 PM, 이한웅(삼구) : 음극 순환물류 확인 부탁드립니다 May 19, 2025 at 9:21 PM, 동휘 Donny : @VK (mcs) May 19, 2025 at 9:23 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16156)(16154) Data loss error Data mismatch error. May 19, 2025 at 9:28 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Please check available Empty magazine for 1F AN NC May 19, 2025 at 9:28 PM, 방혁 PM(Bang.Hyuk) FA : Oh sorry here is GF chat😅 May 19, 2025 at 9:31 PM, 김희용 : solved? May 19, 2025 at 9:32 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 172 • Cathode: 121 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 40 • Cathode: 24 GF NC reel Available lot 4/5 line • AN: 95 • CA: 215 May 19, 2025 at 9:32 PM, Tumruu/투머르/IvancsaFA left this chatroom. May 19, 2025 at 9:32 PM, VK (mcs) : Yes it has been solved May 19, 2025 at 9:39 PM, 김태헌 : ST conveyer In P20 AGV#4 Error please check. May 19, 2025 at 9:53 PM, VK (mcs) : @FA Please check Anode reel STK A51 Port 3(6056) Run-time over error. May 19, 2025 at 10:00 PM, Csanálosi Gábor FA : Done May 19, 2025 at 10:36 PM, VK (mcs) : @FA Please check Cathode reel conveyor E0CNVC52-M09 (9036) LTC0812 has transfer command to STK but it's not transferring. May 19, 2025 at 11:05 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 160 • Cathode: 113 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 51 • Cathode: 38 GF NC reel Available lot 4/5 line • AN: 96 • CA: 203 May 19, 2025 at 11:08 PM, 신정수 : Who stole the laptop from the 2line stack quality inspection area? May 19, 2025 at 11:10 PM, Dmytro Poluekto : we already returned your laptop back, our new leader confused it with mine and accidentally took it May 19, 2025 at 11:15 PM, 이한웅(삼구) : @방혁 PM(Bang.Hyuk) FA GF 음극 공매거진 공급 부족합니다. May 19, 2025 at 11:31 PM, VK (mcs) : @Csanálosi Gábor FA Can you please check it? It's not solved yet. Thx May 19, 2025 at 11:40 PM, Csanálosi Gábor FA : @Kovács Ágnes May 19, 2025 at 11:41 PM, Kovács Ágnes : Solved May 19, 2025 at 11:58 PM, 이한웅(삼구) : @방혁 PM(Bang.Hyuk) FA PM님 음극 순환 물류에 공매거진 3개만 있는 플레이트가 있습니다. May 19, 2025 at 11:59 PM, 이한웅(삼구) : 확인 부탁드립니다. May 20, 2025 at 12:22 AM May 20, 2025 at 12:22 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 2-5 The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 20, 2025 at 12:24 AM, 김지수PM(Gyuri)_FA : @FA could you please check Z-axis origin of VC08(GF AN VD), thanks in advance May 20, 2025 at 12:36 AM, Csanálosi Gábor FA : Done May 20, 2025 at 12:38 AM, 하연철(HA YEONCHEOL)/ : This message was deleted. May 20, 2025 at 12:39 AM, 하연철(HA YEONCHEOL)/ : NC CA C0PVC020 machine has stopped. Please check @FA May 20, 2025 at 12:44 AM, Csanálosi Gábor FA : Done May 20, 2025 at 12:54 AM, 오세민(ST) : C1CNVO72 tray is loss alarm Check please May 20, 2025 at 1:09 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca #44(5-8) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 20, 2025 at 1:14 AM, VK (mcs) : @FA Please check Anode reel STKA52 There is no error but cranes are stopped. May 20, 2025 at 1:16 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16154) Data loss error. May 20, 2025 at 1:16 AM, Yon Ko/연커/ : We working on it May 20, 2025 at 1:16 AM, Csanálosi Gábor FA : Checking May 20, 2025 at 1:18 AM, Yon Ko/연커/ : Agv’s on the way May 20, 2025 at 1:20 AM, M.Ferenc "B"Nc/Vd SL : Thank you! May 20, 2025 at 1:20 AM, Csanálosi Gábor FA : Done May 20, 2025 at 1:20 AM, 김태헌 : ST 4L#12 AGV#4 Align SW Limit Error Please check May 20, 2025 at 1:51 AM, VK (mcs) : @FA Please check Anode reel STKA52 There is no error but cranes are stopped. May 20, 2025 at 2:27 AM, Debreczeni Ármin : Hello Line 4 stacking CA material arriving very slow is there any problem? May 20, 2025 at 2:29 AM, VK (mcs) : There is no problem. Carriers are in CNV port and waiting for AGVS May 20, 2025 at 2:29 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot May 20, 2025 at 2:30 AM, Debreczeni Ármin : Thank you May 20, 2025 at 2:32 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 158 • Cathode: 96 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 38 • Cathode: 16 GF NC reel Available lot 4/5 line • AN: 69 • CA: 182 May 20, 2025 at 3:00 AM, 방혁 PM(Bang.Hyuk) FA : @제조 4,5,6L ST 스테이션 LR버튼 눌러주세요. JOB 몰리면서 공급 늦어질것같습니다 May 20, 2025 at 3:05 AM, Noémi (소미) : @termelés 4,5,6Line ST portokon kérlek nyomjátok meg az LR gombot. A sok JOB miatt késhet az anyag ellátás. May 20, 2025 at 3:06 AM, Debreczeni Ármin : @Betti B SL @Mykhailo @Yosyp Tovt @Vladyslav Kucher Press LR on ST again thank you! May 20, 2025 at 3:25 AM, M.Ferenc "B"Nc/Vd SL : @FA Nc Ca AGVs are stopped on L5 and 2/2 machine. Please check it. May 20, 2025 at 3:28 AM, M.Ferenc "B"Nc/Vd SL : It does not deliver full magazines and does not bring empty ones. May 20, 2025 at 3:30 AM, M.Ferenc "B"Nc/Vd SL : All AGV stopped on Ca side May 20, 2025 at 3:32 AM, Csanálosi Gábor FA : Részben megoldva, megyek a maradékot rendezni May 20, 2025 at 3:32 AM, M.Ferenc "B"Nc/Vd SL : Köszi May 20, 2025 at 3:33 AM, Csanálosi Gábor FA : Yonkoo gyorsabb May 20, 2025 at 4:05 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16159) MLC2216 is not moving. May 20, 2025 at 4:06 AM, Yon Ko/연커/ : Korean technician working. May 20, 2025 at 4:13 AM, VK (mcs) : @FA Please check C1CNV071 cathode side unit(13008) Data mismatch error. May 20, 2025 at 4:17 AM, Yon Ko/연커/ : Working on it May 20, 2025 at 4:25 AM, 방혁 PM(Bang.Hyuk) FA : @제조 GF 순환물류 작동장애로 인한 6L ST자재 공급 지연이 있을수 있습니다. @Noémi (소미) May 20, 2025 at 4:28 AM, Noémi (소미) : @termelés GF ST Conveyor meghibásodása miatt a 6Line ST-en lehetséges, hogy késni fog az anyag ellátás. May 20, 2025 at 4:31 AM, 이민재 : 무언정지였고 정상 가동합니다 May 20, 2025 at 4:34 AM, Noémi (소미) : Az előbb alarm nélküli hiba volt, most már rendesen működik a CV. May 20, 2025 at 4:38 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 156 • Cathode: 93 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 40 • Cathode: 18 GF NC reel Available lot 4/5 line • AN: 87 • CA: 173 May 20, 2025 at 4:58 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16154)(16144) Data loss error! May 20, 2025 at 5:06 AM, Yon Ko/연커/ : Still working on it. May 20, 2025 at 5:23 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGVs do not bring empty magazines into the machines. Please check. May 20, 2025 at 5:27 AM, VK (mcs) : All AGVs are busy. They are delivering full to gantry. After that they will transfer Empty MGZs. May 20, 2025 at 5:51 AM, VK (mcs) : @FA Please check Anode reel conveyor E0CNVA52 RTV run time over. May 20, 2025 at 6:04 AM, Mohammad Amir : @FA Please check this issue still exists since 5:32 and reels delivery has stopped. Thank you very much! May 20, 2025 at 6:09 AM, 이도형 (Lee) : @FA NC AN RTV ERROR. Please check. May 20, 2025 at 6:24 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+4 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 20, 2025 at 6:43 AM, Andrea Zentay : Good morning, @MCS @FA We need help please: VD CA 2-2 AGV unloading required. Thank you. May 20, 2025 at 6:43 AM, Mohammad Amir : Checking May 20, 2025 at 6:46 AM, Mohammad Amir : Please confirm is there any carrier actually exists at C2VDC020_P02? Thank you very much! May 20, 2025 at 6:49 AM, Andrea Zentay : I'm sorry. My fault. CA VD 2-5 May 20, 2025 at 6:50 AM, Mohammad Amir : For 2-5 VD CA, Please press UR . Thank you very much! May 20, 2025 at 6:50 AM, Mohammad Amir : Could you please provide me this information as well. @Andrea Zentay Thank you very much! May 20, 2025 at 6:52 AM, Andrea Zentay : Thank you for you're help: C2VDC050 May 20, 2025 at 6:53 AM, Mohammad Amir : You are welcome! May 20, 2025 at 6:54 AM, Mohammad Amir : Please press Unload Request for this VD 2-5 CA. Thank you very much! May 20, 2025 at 6:56 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.20 Time:06:00~18:00 1. Baek Hojong 2. Lee Jubing Köszönöm szépen May 20, 2025 at 7:16 AM, Hồng Anh SL NC&VD 1F : Pls check for 4/3 AN mc stop 10min bcs dont have empty mgz. I saw on the port of robot still have empty mgz wait. May 20, 2025 at 7:17 AM, Mohammad Amir : Checking May 20, 2025 at 7:19 AM, Mohammad Amir : Issue has been resolved ✅. One empty magazine on AGV#3 is on the way. Thank you very much! May 20, 2025 at 7:19 AM, Hồng Anh SL NC&VD 1F : Thank you!! May 20, 2025 at 7:21 AM, Mohammad Amir : You are welcome! May 20, 2025 at 7:41 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+4 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 20, 2025 at 7:52 AM, P.Bence A SSL : Check please L4-5-6 mgz ca mgz delivery very slow May 20, 2025 at 7:52 AM, Mohammad Amir : Checking May 20, 2025 at 7:54 AM, Mohammad Amir : @FA @Kertész Dániel Please check C1CNV072_16_138 there is Data Mismatch error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 20, 2025 at 7:55 AM, Ynja/ivancsa FA : checking May 20, 2025 at 7:57 AM, Ynja/ivancsa FA : solved May 20, 2025 at 7:59 AM, Mohammad Amir : Currently CNV071 was in error it caused delays and also there is a lot of UR jobs so AGVs are busy performing that tasks as well. Could you please also remove 1+5 carriers from C1CNV072_M01 ,it is also slowing down stacking materials delivery. I am monitoring. Thank you very much! May 20, 2025 at 7:59 AM, Mohammad Amir : Thank you very much! May 20, 2025 at 8:04 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+5 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 20, 2025 at 8:10 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 161 • Cathode: 105 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 20 • Cathode: 22 GF NC reel Available lot 4/5 line • AN: 82 • CA: 161 Thank you very much! May 20, 2025 at 8:11 AM, Barta Rudi : Good morning, @FA We need help please: VD CA 2-5 AGV unloading required. Thank you. May 20, 2025 at 8:23 AM, P.Bence A SSL : Ca mgz delivery very slow please check May 20, 2025 at 8:25 AM, 이도형 (Lee) : @FA NC CA #3 Robot ERROR. Please check. May 20, 2025 at 8:27 AM, P.Bence A SSL : L6 left side dont have ca mgz May 20, 2025 at 8:29 AM, Mohammad Amir : Everything is okay at the moment. Materials are waiting at the O/P ports of the CNV for AGV. All AGVs are busy ,AGVs are performing UR jobs as well so it is keeping AGVs busy. Should I give priority to LR jobs ,is production getting affected? Thank you very much! May 20, 2025 at 8:30 AM, P.Bence A SSL : let's wait for now May 20, 2025 at 8:31 AM, Mohammad Amir : Sure, I am monitoring. Thank you very much! May 20, 2025 at 8:31 AM, P.Bence A SSL : L6 left side ca full plate coming ? May 20, 2025 at 8:33 AM, Mohammad Amir : At the moment, All the CA materials jobs from CNV to Stacking machine is for Line -5 &4. Afterwards jobs will be created for line-6 as well. Thank you very much! May 20, 2025 at 8:36 AM, FACS_JaewonShin : Stakinng Full-auto LR program will update in the 4line and 5line today. Location : stacking station 4,5 Time : 13:30 FA CS will do monitring today. May 20, 2025 at 8:37 AM, Mohammad Amir : This message was deleted. May 20, 2025 at 8:45 AM, Sazzad Bhai SKon : Good morning @FA Please check the duplicated plates from manual port. And after confirming restock them. Plate1: UNKDUP-MLC4203 (C1STKC71, 0105302) Plate2: UNKDUP-MLC4203 (C1STKC71, 0100303) Plate3: UNKDUP-MLC4188 (C1STKC72, 0200201) Plate4: DUP2505191747 (C1STKC72, 0200201) May 20, 2025 at 9:06 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKA51 _C02 it is inactive without error . Thank you very much! May 20, 2025 at 9:07 AM, Mohammad Amir : @FA @Kertész Dániel Also,Please check E0STKA52_C02 it is inactive without error . Thank you very much! May 20, 2025 at 9:08 AM, Andrea Zentay : @MCS @FA NC CA #1 AGV check please. Thank you. May 20, 2025 at 9:09 AM, Mohammad Amir : Checking May 20, 2025 at 9:12 AM, Sazzad Bhai SKon : @FA It is suspected that magazine MA2358 is duplicated in two plates. Please check the plate and confirm their magazines. MLA0188 (C1STKA71, 0200602) May 20, 2025 at 9:14 AM, Mohammad Amir : It has job to go to C0PVC030_P11. @FA Please check AGV#1 Fork #1 LD/UD REQ not received error. Thank you very much! May 20, 2025 at 9:19 AM, Ynja/ivancsa FA : solved May 20, 2025 at 9:19 AM, Sazzad Bhai SKon : It was confirmed that UNKdup-MLC4193 has been removed from manual port C1STKC72_M01. But data is still there, so we will clear the location May 20, 2025 at 10:06 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 166 • Cathode: 100 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 10 • Cathode: 22 GF NC reel Available lot 4/5 line • AN: 77 • CA: 166 Thank you very much! May 20, 2025 at 10:17 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0CNVA52_M08 there is STP-01 Up Error. Thank you very much! May 20, 2025 at 10:23 AM, Kertész Dániel : @Mohammad Amir The GF AN NC seems red in the MCS, but there are no errors. Can you reset it please? Thank you! May 20, 2025 at 10:23 AM, Mohammad Amir : Checking May 20, 2025 at 10:24 AM, Mohammad Amir : As I checked there Is Light curtain detected at C4NCA030_P04 alarm from CIM side. Please clear it first. Thank you very much! May 20, 2025 at 10:25 AM, Sazzad Bhai SKon : @FA Please confirm if there is any Plate on C1STKC72_M01_OP01 May 20, 2025 at 10:26 AM, Nguyên : This message was deleted. May 20, 2025 at 10:26 AM, Nguyên : Please check for me. 2/1 AN NC GF. Continuously no MGZ. AGV also does not pick up goods. May 20, 2025 at 10:27 AM, Mohammad Amir : Checking May 20, 2025 at 10:29 AM, Mohammad Amir : Issue has been resolved ✅. Empty magazine on the way and full magazine also on its way to Warehouse. I am monitoring. Thank you very much! May 20, 2025 at 10:33 AM, Kertész Dániel : The port is working well. May 20, 2025 at 10:34 AM, Mohammad Amir : As I checked there Is Light curtain 03 detected at C4NCA030_P04 alarm from CIM side since 7:45 . It is still not cleared, please could you check again. Thank you very much! May 20, 2025 at 10:47 AM, FACS_JaewonShin : [Program updated] Location : stacking station line 6 Content 1. Hmi LR UR status display update None, loadreq, unloadreq => none loadreq,unloadreq,nolot,mcsng,portng,jobchange 2. Station lamp bug fix White lamp blink : Load requsted, unload requested Blue lamp blink : No lot, MCS NG, Port NG Green light on : Auto It will update line4,5 too after 13:30 May 20, 2025 at 11:04 AM, Ynja/ivancsa FA : @Mohammad Amir Please delete a job AGV#07 in VD CA Double storage May 20, 2025 at 11:04 AM, Mohammad Amir : Checking May 20, 2025 at 11:06 AM, Mohammad Amir : Job has been cancelled successfully ✅. Please,Let me know if you need further assistance. Thank you very much! May 20, 2025 at 11:09 AM, 이도형 (Lee) : @FA NC AN RTV ERROR. Please check. May 20, 2025 at 11:10 AM, Mohammad Amir : @Ynja/ivancsa FA @FA Please check E0CNVA52_RTV01 there is Unload start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 20, 2025 at 11:11 AM, Ynja/ivancsa FA : Sorry I cant🥺 May 20, 2025 at 11:12 AM, Ynja/ivancsa FA : Thank you May 20, 2025 at 11:12 AM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! May 20, 2025 at 11:12 AM, Mohammad Amir : You are welcome! May 20, 2025 at 11:15 AM, Nguyên : please check for me. 5/2 6/2 NC AN GF AGV not picking up goods May 20, 2025 at 11:15 AM, Mohammad Amir : Checking May 20, 2025 at 11:19 AM, Mohammad Amir : Issue has been resolved ✅ For 5-2 NC AN -AGV#9 has been assigned. And for 6-2 NC AN AGV-#7 has been assigned. Thank you very much! May 20, 2025 at 11:30 AM, 이도형 (Lee) : @FA NC CA #9 AGV ERROR. Please check. May 20, 2025 at 12:19 PM, Mohammad Amir : This message was deleted. May 20, 2025 at 12:23 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 167 • Cathode: 88 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 19 • Cathode: 34 GF NC reel Available lot 4/5 line • AN: 69 • CA: 153 Thank you very much! May 20, 2025 at 12:53 PM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you very much! May 20, 2025 at 12:56 PM, Nguyên : Pls fix plate position on chamber 34(4-7) VD AN GF May 20, 2025 at 1:03 PM, 정은탁 (Jung EunTak) : @FA NC CA #3 AGV ERROR. Please check. May 20, 2025 at 1:29 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 157 • Cathode: 82 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 23 • Cathode: 39 GF NC reel Available lot 4/5 line • AN: 76 • CA: 155 Thank you very much! May 20, 2025 at 1:33 PM, Ynja/ivancsa FA : done ✅ May 20, 2025 at 1:39 PM, Mohammad Amir : @Manufacturing @Nguyên Please press LR for 5-2 P01/02 as there is Half chamber situation. Thank you very much! May 20, 2025 at 1:41 PM, Sazzad Bhai SKon : Super! Did you find a plate ID: MLC4188? May 20, 2025 at 1:44 PM, Ynja/ivancsa FA : Yes, I changed the plate ID to MLC4212 May 20, 2025 at 1:44 PM, Barta Rudi : @MCS @FA Due to a magazine shortage, several machines have stopped. However, there are magazines in the warehouse and also at the ports. Could someone check what the issue might be? May 20, 2025 at 1:44 PM, Barta Rudi : Cathode May 20, 2025 at 1:44 PM, Mohammad Amir : I am checking May 20, 2025 at 1:47 PM, Sazzad Bhai SKon : Thank you, MLC4188 was duplicated. May 20, 2025 at 1:50 PM, Mohammad Amir : Everything is good now ✅ AGV#9 and AGV#5 on the way with empty magazine to line -6 and line -2 consequently. There are also four more empty jobs waiting at the Gantry O/P ports to be delivered. Currently AGVs are busy performing UR jobs , bringing full magazine to Gantry , that's why you witnessed delay. If you need urgently,I can provide priority to Empty magazine delivery. Please inform me is production getting affected because of shortages of empty magazine. Thank you very much! May 20, 2025 at 1:50 PM, Sazzad Bhai SKon : One more request, Can you please check this: please confirm the magazines of this plate. MLC6198 (C2STKC71, 0103801) MC9260, MC9141, MCA465, MC9423 May 20, 2025 at 1:56 PM, Ynja/ivancsa FA : Is this the first floor? May 20, 2025 at 1:57 PM, Sazzad Bhai SKon : Yes May 20, 2025 at 1:58 PM, Barta Rudi : 2/313:21~ 2/1 13:55~ 4/1 13:57~ 4/2 It will run out soon. 4/3 It will run out soon. 6/1 13:50~ 5/1 13:54~ These machines are currently stopped or will soon stop due to a magazine shortage. Please increase the priority. Thank you! May 20, 2025 at 1:59 PM, Mohammad Amir : Sure , working on it. Thank you very much! May 20, 2025 at 1:59 PM, Ynja/ivancsa FA : I’m working on the GF now, so I can’t go upstairs to check it at the moment. I will check it later when I work on the 1F. May 20, 2025 at 2:02 PM, Mohammad Amir : I have given priorities to empty magazine delivery. Soon you will start receiving the empty magazine. AGV#3 ,#6 on the way to 5-3 and 4-1. I am monitoring. Thank you very much! May 20, 2025 at 2:06 PM, Mohammad Amir : Assigned AGVs after increasing priority:- 4-1 -AGV#3 5-1-AGV#4 5-3 -AGV#6 Jobs has Also created for 2-1,6-1,5-2,2-3,2-2. ✅ I am managing. Thank you very much! May 20, 2025 at 2:08 PM, Barta Rudi : Thank you! May 20, 2025 at 2:08 PM, Mohammad Amir : You are welcome! May 20, 2025 at 2:08 PM, FACS_JaewonShin : Line3,4,5,6 program is updated. FA CS is monitoring. When plate is empty, load request is being made automatically after 10 seconds. May 20, 2025 at 2:13 PM, Ynja/ivancsa FA : @Mohammad Amir Please check 6-8 VD CA 1 carrier left May 20, 2025 at 2:13 PM, Mohammad Amir : Checking May 20, 2025 at 2:16 PM, Nguyên : Please check for me. There are many empty trays in stock but the machines often run out of trays. May 20, 2025 at 2:16 PM, Nguyên : NC AN GF May 20, 2025 at 2:17 PM, Mohammad Amir : This message was deleted. May 20, 2025 at 2:17 PM, Mohammad Amir : Please confirm me this carrier id ? Thank you very much! May 20, 2025 at 2:19 PM, Ynja/ivancsa FA : MLC4178 May 20, 2025 at 2:20 PM, Mohammad Amir : This message was deleted. May 20, 2025 at 2:21 PM, Mohammad Amir : Thank you very much for the confirmation. During unload it was not successfully unloaded that's why it is still there. Please transfer this carrier Manually to Post VD STK. Thank you very much! May 20, 2025 at 2:24 PM, Ynja/ivancsa FA : Previously I was able to transfer it manually, but now it’s not working. I’m not sure why. May 20, 2025 at 2:24 PM, P.Bence A SSL : GF nc we need empty mgz or production stop solve this problem please .. May 20, 2025 at 2:24 PM, Mohammad Amir : There are jobs exists for empty magazine as soon as Magazine reaches the O/P ports of Gantry,jobs are getting created. There are also UR jobs and AGVS also busy in performing those jobs. I have provided it with more priority so delivery for empty magazine will be faster. Thank you very much! May 20, 2025 at 2:25 PM, Mohammad Amir : I am checking May 20, 2025 at 2:26 PM, Mohammad Amir : Could you please tell me the location of this carrier MLC4178? Is it P03? Thank you very much! May 20, 2025 at 2:27 PM, Mohammad Amir : AGV#2 and AGV#8 on the way for 6-1 and 2-3. I am monitoring. Thank you very much! May 20, 2025 at 2:27 PM, Mohammad Amir : For your information @P.Bence A SSL Thank you very much! May 20, 2025 at 2:27 PM, Mohammad Amir : For your information @P.Bence A SSL Thank you very much! May 20, 2025 at 2:33 PM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA @Zulaa/졸라/Ivancsa FA please check NC CA alarm May 20, 2025 at 2:33 PM, KIM SEYEON [김세연]_FA : please focus on NC more than other rooms May 20, 2025 at 2:36 PM, 정은탁 (Jung EunTak) : NC Ca' 공매거진 공급지연으로 인한 설비정지 2-1 12:30~13:30 60분 14:03~ 2-2 13:04~13:56 52분 2-3 13:22~ 4-1 13:57~14:09 12분 4-2 12:10~12:40 30분 4-3 11:55~12:40 45분 5-1 12:06~12:34 28분 13:02~13:30 28분 5-2 13:02~13:30 28분 5-3 12:38~14:00 82분 13:54~14:07 13분 6-1 13:50~ May 20, 2025 at 2:41 PM, Ynja/ivancsa FA : Yes it is P03 May 20, 2025 at 2:41 PM, Mohammad Amir : Thank you very much for the confirmation. I am working on it May 20, 2025 at 2:45 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot May 20, 2025 at 2:45 PM, Mohammad Amir : Sure Sir,. Checking. Thank you very much! May 20, 2025 at 2:48 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 150 • Cathode: 77 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 32 • Cathode: 62 GF NC reel Available lot 4/5 line • AN: 67 • CA: 156 Thank you very much! May 20, 2025 at 3:16 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_C01/C02 there is Light curtain error and it is blocking cathode empty magazine delivery . Thank you very much! May 20, 2025 at 3:54 PM, Mohammad Amir : @FA @Kertész Dániel Please check is C1CNV072 is under maintenance? It is being OOS ,it will affect the staking materials delivery speed. Thank you very much! May 20, 2025 at 3:57 PM, Kertész Dániel : It's not under maintenance, it just had an "Inv-01 Run timeover" error, and now the it's being resolved May 20, 2025 at 4:00 PM, Mohammad Amir : Actually in past two hours I witnessed following downtime:- 14:07-14:09 14:23-14:29 14:31-14:37 14:55-14:57 15:39-15:41 15:53- Till now. Thank you very much for confirming. Thank you very much! May 20, 2025 at 4:02 PM, Ynja/ivancsa FA : solved May 20, 2025 at 4:02 PM, Mohammad Amir : Thank you very much! May 20, 2025 at 4:09 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 141 • Cathode: 72 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 41 • Cathode: 65 GF NC reel Available lot 4/5 line • AN: 66 • CA: 157 Thank you very much! May 20, 2025 at 4:26 PM, Mohammad Amir : Please inform me now should I make the process normal now ? Do you have enough empty magazine? Looking forward to hearing from you. Thank you very much! May 20, 2025 at 4:31 PM, Barta Rudi : Currently, all machines on the cathode side are running, and there are enough magazines! I think you can switch back to normal operation. Thank you for your help! May 20, 2025 at 4:32 PM, Mohammad Amir : You are welcome! Feel free to contact me again if you face any issue. May 20, 2025 at 4:35 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKA71_C01/C02 there is Light curtain error and it is blocking Anode empty magazine delivery . Thank you very much! May 20, 2025 at 5:17 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 139 • Cathode: 70 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 40 • Cathode: 70 GF NC reel Available lot 4/5 line • AN: 52 • CA: 160 Thank you very much! May 20, 2025 at 5:52 PM, 정은탁 (Jung EunTak) : NC Ca' 공매거진 공급지연으로 인한 설비정지 2-1 12:30~13:30 60분 14:03~14:23 20분 2-2 13:04~13:56 52분 2-3 13:22~14:22 60분 4-1 13:57~14:09 12분 4-2 12:10~12:40 30분 14:15~14:30 15분 15:10~15:29 19분 4-3 11:55~12:40 45분 14:05~15:13 68분 5-1 12:06~12:34 28분 13:02~13:30 28분 14:39~15:29 50분 5-2 13:02~13:30 28분 5-3 12:38~14:00 82분 13:54~14:07 13분 14:49~15:40 51분 6-1 13:50~14:05 15분 May 20, 2025 at 5:53 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD An 6-1 The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. May 20, 2025 at 6:01 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.20. "B" műszak, 12+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(0): Sick(0): Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(5): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromis May 20, 2025 at 6:22 PM, 김현태 : @FA NC AN AGV #7 error. Thanks May 20, 2025 at 6:23 PM, 인제(Hwang) : NC Ca Robot#2 & AGV#10 Error May 20, 2025 at 6:27 PM, VK (mcs) : @FA Please check Cathode reel STK C51 There is no error but cranes are stopped. May 20, 2025 at 6:31 PM, VK (mcs) : Now it indicates load over size error. Thx May 20, 2025 at 6:35 PM, Rácz Dániel / FA : Boeing May 20, 2025 at 6:40 PM, 김현태 : @FA NC AN AGV #10 error. Thanks May 20, 2025 at 6:44 PM, Lan Nhi : @FA hello. plz check for me machine 4-3 An has not been loaded with empty mgz for a very long time. thanks May 20, 2025 at 6:47 PM, VK (mcs) : Please apply LR May 20, 2025 at 6:51 PM, VK (mcs) : Previous job for notching 4/3 cancelled by OP action at 17:28. So please apply again LR May 20, 2025 at 6:54 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 Load oversize error. May 20, 2025 at 6:55 PM, Rácz Dániel / FA : Going May 20, 2025 at 7:11 PM, Lan Nhi : @FA Hi! @FA Please check AGV empty MGZ loader for AN 4/3 line. out of empty Mgz because AGV not delivery. Thanks. May 20, 2025 at 7:14 PM, Böröcz Tamás : @mcs May 20, 2025 at 7:16 PM, VK (mcs) : I explained it. RTD doesn’t receive LR. Please apply LR . Thx May 20, 2025 at 7:22 PM, 김주연 : C4NCA030_P04. is oos and no LR May 20, 2025 at 7:30 PM, 김주연 : @FA Plz check C4NCA030_P04 OoS May 20, 2025 at 7:33 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 122 • Cathode: 52 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 59 • Cathode: 62 GF NC reel Available lot 4/5 line • AN: 57 • CA: 139 May 20, 2025 at 7:40 PM, Lan Nhi : @RTD sorry. check for me NC/AN machine 4/3 not provided empty mgz since 17:28. thanks May 20, 2025 at 7:43 PM, VK (mcs) : We received LR at 19:40:05 There is no available material. Thx May 20, 2025 at 7:45 PM, Lan Nhi : Thanks May 20, 2025 at 8:12 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV does not transport full magazines from the 2-2 machine. Please check. May 20, 2025 at 8:12 PM, Csanálosi Gábor FA : @VK (mcs) May 20, 2025 at 8:15 PM, VK (mcs) : There is no UR. Last one was at 20:02 and successfully transferred to STK. May 20, 2025 at 8:23 PM, Csanálosi Gábor FA : @VK (mcs) nc ca 2-3 and 4-3 maschines are full, but no agvs coming to take material off. Can you check it pls? May 20, 2025 at 8:24 PM, M.Ferenc "B"Nc/Vd SL : 2-2 same May 20, 2025 at 8:26 PM, VK (mcs) : Jobs assigned for both machines but currently all AGVs are busy. May 20, 2025 at 8:27 PM, VK (mcs) : For 2/2 RTD, does not receive UR. Please apply UR. Thx May 20, 2025 at 8:31 PM, VK (mcs) : Now. job assigned for notching 2/2 port 1. Thx May 20, 2025 at 9:02 PM, 김현태 : @FA NC AN AGV #10 error. Thanks May 20, 2025 at 9:03 PM, Rácz Dániel / FA : Goning May 20, 2025 at 9:05 PM, Yon Ko/연커/ : Solved May 20, 2025 at 9:06 PM, M.Ferenc "B"Nc/Vd SL : @mcs Is it possible that this AGV overload will last for the entire shift? Once again, no AGV arrives at NC Ca 2/2 to transport the full magazines. May 20, 2025 at 9:10 PM, VK (mcs) : I don't think so. It depends on request. For notching cathode 2/2 port 1. AGV already transferred Full MGZ. But for port 2. There is no UR. Please apply UR for port 2.thx May 20, 2025 at 9:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 120 • Cathode: 45 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 53 • Cathode: 72 GF NC reel Available lot 4/5 line • AN: 63 • CA: 140 May 20, 2025 at 9:26 PM, Lan Nhi : @RTD plz. check for me NC/AN, 4/3 regular not given empty mgz since 20:33. thanks May 20, 2025 at 9:27 PM, VK (mcs) : Carrier is on AGV 7 and on the way May 20, 2025 at 9:34 PM, 전 운 (Jeon Woon) : 오늘 야간 FA PM님 누구신가요? May 20, 2025 at 9:34 PM, 방혁 PM(Bang.Hyuk) FA : 넵 말씀해주세요 May 20, 2025 at 9:34 PM, 전 운 (Jeon Woon) : GF AN Stack 순환 C/V Diverter Belt 빠졋습니다… May 20, 2025 at 9:35 PM, 인제(Hwang) : NC Ca Robot#3 Error May 20, 2025 at 9:36 PM, Rácz Dániel / FA : Boing May 20, 2025 at 9:37 PM, 최명운(CHOI MYOUNGWOON) : GF Circular Logistics C/V Diverter Belt is detached. Please take action with a technician. May 20, 2025 at 9:39 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B May 20, 2025 at 9:41 PM, Rácz Dániel / FA : Solved May 20, 2025 at 10:03 PM, 인제(Hwang) : NC Ca AGV#9 Error May 20, 2025 at 10:22 PM, 방혁 PM(Bang.Hyuk) FA : @전 운 (Jeon Woon) 조장님 스택 순환물류 복구까지 30분 정도 추가로 소요될것으로 보입니다. 매거진 부족할시 후창고에서 수동출고 도와드리겠습니다 May 20, 2025 at 10:22 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please share available lot May 20, 2025 at 10:25 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 101 • Cathode: 33 Pre STK > VD • Anode: 00 • Cathode: 04 Post STK > Stacking • Anode: 70 • Cathode: 75 GF NC reel Available lot 4/5 line • AN: 67 • CA: 145 May 20, 2025 at 10:25 PM, Truong : NC AN AGV #10 error please come check May 20, 2025 at 10:26 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check May 20, 2025 at 10:28 PM, Truong : NC CA AGV #5 error please come check Thank you May 20, 2025 at 10:33 PM, 인제(Hwang) : @방혁 PM(Bang.Hyuk) FA PM님 GF NC An AGV#10 동일위치에서 센서때문에 계속 멈추는거같은데 확인 부탁드립니다 May 20, 2025 at 10:34 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa do you think is the problem can be solved by yourself? what is the situation? May 20, 2025 at 10:37 PM, Dariimaa/다리마/Ivancsa : Solved May 20, 2025 at 10:39 PM, Szücs Géza FT-B : DV belt has been changed. CNV072 working again May 20, 2025 at 10:55 PM, KIM SEYEON [김세연]_FA : good May 20, 2025 at 11:05 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 RTV unload start destination unload not busy time over error. May 20, 2025 at 11:06 PM, Csanálosi Gábor FA : Coming May 20, 2025 at 11:10 PM, 인제(Hwang) : NC An AGV#10 동일위치 재발생입니다 May 20, 2025 at 11:10 PM, Csanálosi Gábor FA : Done May 20, 2025 at 11:12 PM, 김희용 : @인제(Hwang) 혹시 빨간경광등 점멸중이었을까요? May 20, 2025 at 11:12 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa what is the error name on agv 10? May 20, 2025 at 11:12 PM, Dariimaa/다리마/Ivancsa : Solved May 20, 2025 at 11:13 PM, 인제(Hwang) : 네 맞습니다 동일위치에서만 지속 발생합니다 May 20, 2025 at 11:13 PM, 김희용 : 옙 감사합니다 ACS에는 정상이었는데 점검요청하겠습니다 May 20, 2025 at 11:17 PM, M.Ferenc "B"Nc/Vd SL : @FA VD CA #41(5-5) AGV did not continue to load the chamber after loading 2 plates. May 20, 2025 at 11:18 PM, 김희용 : @M.Ferenc "B"Nc/Vd SL Please 1-more Load Request again? May 20, 2025 at 11:24 PM, M.Ferenc "B"Nc/Vd SL : I did it. May 20, 2025 at 11:25 PM, Csanálosi Gábor FA : "Oops i did it again..." May 20, 2025 at 11:25 PM, 김희용 : @VK (mcs) It's Okay! May 20, 2025 at 11:26 PM, VK (mcs) : Yes it's fine May 20, 2025 at 11:26 PM, 김희용 : @VK (mcs) Please Check VD CA 5-5 LR? May 20, 2025 at 11:26 PM, VK (mcs) : LR received May 20, 2025 at 11:26 PM, Dariimaa/다리마/Ivancsa : AGV light alarm. AGV rear sensor error May 20, 2025 at 11:26 PM, M.Ferenc "B"Nc/Vd SL : Ezt csak én értettem.😅 May 20, 2025 at 11:26 PM, 김희용 : Good! May 20, 2025 at 11:40 PM, Betti B SL : L6 ST hardly comes, AGV doesn't take the empty magazine and hardly brings a full one May 20, 2025 at 11:45 PM, 김희용 : We had an issue with our conveyor system for about an hour, and after resolving it, it's taking a bit of time for the AGVs to catch up and normalize the flow. Could you be a little patient, please? @Betti B SL May 20, 2025 at 11:47 PM, Betti B SL : Okay. Thank you very much. May 20, 2025 at 11:48 PM, 김희용 : Thank you for understanding. May 20, 2025 at 11:50 PM, Yon Ko/연커/ : NOTCHING CATHODE ROBOT#3 error check pls.. May 20, 2025 at 11:54 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA hello gabor can you check it? May 20, 2025 at 11:54 PM, Csanálosi Gábor FA : Omw May 20, 2025 at 11:58 PM, Szücs Géza FT-B : Gàbor also sees the error written. All technicians see it. They will report back when they are done with the current error. May 20, 2025 at 11:59 PM, Csanálosi Gábor FA : Done May 21, 2025 at 12:11 AM May 21, 2025 at 12:11 AM, Lan Nhi : @RTD Hello. Currently reel 1F is in the GF reel line 6 warehouse, please help me put this reel back in the 1F warehouse. The reel is in pallet LTA0049, 6-2. EA2P081F5169213B. Thanks May 21, 2025 at 12:13 AM, VK (mcs) : Checking May 21, 2025 at 12:18 AM, VK (mcs) : The reason is: LTA0049 and LTA0894 were LOT mismatched. I created a transfer command to the STK. Thx May 21, 2025 at 12:19 AM, Pálosi Róbert : @VK (mcs) Hello @VK mcs. We need E0STKA31 for verification. For 10 minutes from 0:25 to 0:35 May 21, 2025 at 12:30 AM, Pálosi Róbert : Finished. Thanks! May 21, 2025 at 12:44 AM, Yosyp Tovt : 6 line stopped AGV 7. STK May 21, 2025 at 12:48 AM, M.Ferenc "B"Nc/Vd SL : We pressed LR again, but still no magazine arrived in the chamber. Please check. May 21, 2025 at 12:51 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA robot#3 error. Please check. May 21, 2025 at 12:51 AM, 김희용 : @M.Ferenc "B"Nc/Vd SL The reason is that there’s no material available for transfer. May 21, 2025 at 12:52 AM, M.Ferenc "B"Nc/Vd SL : Okay! Thank you! May 21, 2025 at 12:54 AM, VK (mcs) : Please send them to Post-STK and apply again for LR. Previous LR reply was unsuccessful. Because in RTD port 4 is out of service! May 21, 2025 at 12:57 AM, VK (mcs) : I changed status of port in RTD . So please apply again LR for empty ports. Thx May 21, 2025 at 12:58 AM, VK (mcs) : No need any more. I fixed. Carriers on the way. Thx May 21, 2025 at 1:20 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 100 • Cathode: 24 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 78 • Cathode: 102 GF NC reel Available lot 4/5 line • AN: 77 • CA: 132 May 21, 2025 at 2:51 AM, Dariimaa/다리마/Ivancsa : @FA tech NC CA robot#2 error please check Thank you! May 21, 2025 at 2:51 AM, Csanálosi Gábor FA : Coming May 21, 2025 at 2:56 AM, Csanálosi Gábor FA : Done May 21, 2025 at 3:01 AM, 인제(Hwang) : NC An AGV#10 동일위치 동일증상 지속발생합니다 May 21, 2025 at 3:03 AM, Csanálosi Gábor FA : Done May 21, 2025 at 3:14 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 Port 1(16040) It’s out of service. May 21, 2025 at 3:18 AM, 김현태 : @FA NC AN AGV #01 error. Thanks May 21, 2025 at 3:22 AM, Rácz Dániel / FA : Solve May 21, 2025 at 3:39 AM, 김현태 : @FA NC AN AGV #10 and #01 error. Thanks May 21, 2025 at 3:43 AM, Rácz Dániel / FA : Sofved May 21, 2025 at 3:43 AM, 최명운(CHOI MYOUNGWOON) : A szíj ugyanott lejött. Kérem, kérjen szakembert a beavatkozás megkezdéséhez. @Szücs Géza FT-B May 21, 2025 at 3:49 AM, 김현태 : @FA NC AN AGV #01 error. Thanks May 21, 2025 at 3:51 AM, 김현태 : @방혁_이반차FA PM님 GF NC An AGV#01 동일위치에서 센서때문에 계속 멈추는거같은데 확인 부탁드립니다 May 21, 2025 at 3:55 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 01 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 86 • Cathode: 125 GF NC reel Available lot 4/5 line • AN: 75 • CA: 142 May 21, 2025 at 4:07 AM, VK (mcs) : @FA Please check Anode reel conveyor A52 (7050) RTV TR01 position alarm. May 21, 2025 at 4:13 AM, 최명운(CHOI MYOUNGWOON) : Action has been taken May 21, 2025 at 4:21 AM, M.Ferenc "B"Nc/Vd SL : @FA NC AN reel conveyor error. May 21, 2025 at 4:31 AM, Debreczeni Ármin : From line 5 AGV very rarely take empty magazin May 21, 2025 at 4:33 AM, 김현태 : @FA NC AN AGV #10 error. Thanks May 21, 2025 at 4:35 AM, VK (mcs) : Currently, all AGVs are busy . We received multiple Load and unload requests. May 21, 2025 at 4:38 AM, Debreczeni Ármin : I just ask. Is it not an option to use more AGV? May 21, 2025 at 4:41 AM, 김지수PM(Gyuri)_FA : @최명운(CHOI MYOUNGWOON) GF 순환물류 컨베이어 M01 로 빠져야하는 캐리어>3개, M04로 빠져야하는 캐리어>6개인데 지금 카트가 없는건가요? May 21, 2025 at 4:43 AM, VK (mcs) : Decision of that unfortunately is not in my hands. May 21, 2025 at 4:44 AM, 최명운(CHOI MYOUNGWOON) : 네.카트 찾아보겠습니다 May 21, 2025 at 4:46 AM, VK (mcs) : @Manufacturing Please check Circular conveyor C1CNV072-M04 1+5 carriers are waiting. Also please check port M01 1+2 carriers are waiting. May 21, 2025 at 4:49 AM, Lan Nhi : @RTD plz. check for me NC/An, machine 2/2 agv often not come to receive mgz is full in outline. for quite a long time. thanks May 21, 2025 at 4:51 AM, VK (mcs) : Jobs assigned but all 10 AGVs are busy. May 21, 2025 at 5:02 AM, Yon Ko/연커/ : @Csanálosi Gábor FA VD CA AGV#02 Check it please thank you. May 21, 2025 at 5:02 AM, Csanálosi Gábor FA : Coming May 21, 2025 at 5:03 AM, Lan Nhi : yes. i got is, machine 2-3 is similar May 21, 2025 at 5:09 AM, Yon Ko/연커/ : Repeated again.😮‍💨 May 21, 2025 at 5:10 AM, Csanálosi Gábor FA : Waiting for camera than go back there May 21, 2025 at 5:14 AM, 김현태 : @FA NC AN AGV #10 error. Thanks May 21, 2025 at 5:17 AM, Yon Ko/연커/ : This message was deleted. May 21, 2025 at 5:44 AM, 인제(Hwang) : NC Ca Robot#2 & AGV#7 Error May 21, 2025 at 5:47 AM, Dariimaa/다리마/Ivancsa : Solved May 21, 2025 at 6:16 AM, 이도형 (Lee) : @FA NC CA #10 AGV ERROR. Please check. NC An AGV#10 센서오작동 지속발생 - An 4-1 배출Port 앞에서 동일 증상 발생 May 21, 2025 at 6:22 AM, Ynja/ivancsa FA : NC CA AGV#10 is fine. NC AN AGV#10 issue has been solved. May 21, 2025 at 6:37 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.21 Time:06:00~18:00 1. BAEK HOJONG 백호종PM 2. Elec Song Taeyong Assy GF Ca NC OH Eunhyang GF Ca NC Kim Jongwon May 21, 2025 at 6:44 AM, 이도형 (Lee) : @FA "E0CNVA52, M09 and M08 cannot be loaded. Please check." May 21, 2025 at 6:52 AM, 이도형 (Lee) : @FA "E0CNVC52, RTV Please check." May 21, 2025 at 6:53 AM, Mohammad Amir : @FA Please check E0CNVC52_09_048 there is Inv-01 run time over error and reels delivery has been stopped. Please check out this issue on priority. Thank you very much! May 21, 2025 at 6:56 AM, Mohammad Amir : @F.A.briczius Gergő Please check this issue. Thank you very much! May 21, 2025 at 6:57 AM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check this by fa technicians May 21, 2025 at 6:58 AM, Lajos Gábor F.A. : Done May 21, 2025 at 6:59 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 6:59 AM, Farkas Tamàs : Ok May 21, 2025 at 6:59 AM, KIM SEYEON [김세연]_FA : thanks May 21, 2025 at 7:02 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 79 • Cathode: 05 Pre STK > VD • Anode: 13 • Cathode: 00 Post STK > Stacking • Anode: 75 • Cathode: 114 GF NC reel Available lot 4/5 line • AN: 73 • CA: 118 Thank you very much! May 21, 2025 at 7:02 AM, F.A.briczius Gergő : Sorry, I am on the 1F. I can not help you on the GF today. @Lajos Gábor F.A. @Kertész Dániel check it please. Thank you so much May 21, 2025 at 7:03 AM, Mohammad Amir : Thank you very much for the information. Issue has been resolved ✅. May 21, 2025 at 7:08 AM, T. Gàbornè C SL NC : @Fa Please check CA NC AGV #4 Thanks May 21, 2025 at 7:13 AM, Kertész Dániel : @Mohammad Amir Good Morning! Please can you check why the operators can't send back the empty reel traye from these ports: E0CNVA52_M07 & M09. May 21, 2025 at 7:13 AM, Mohammad Amir : Good morning, Checking! May 21, 2025 at 7:15 AM, Kertész Dániel : And also we have problem with C1CNV072, it says the MCS state is offline, and because of this the materials are not moving. Can you check what happened? Thank you! May 21, 2025 at 7:15 AM, Mohammad Amir : Checking May 21, 2025 at 7:17 AM, Mohammad Amir : @상진 Sir, @CCS Please check this issue C1CNV072 is in Offline mode that's why stacking materials delivery has been stopped. Thank you very much! May 21, 2025 at 7:20 AM, QuangPhan : Hello, Good morning @MCS Could you please make priority GF NC AN line 2 please . We will run out of material soon . Thank you. May 21, 2025 at 7:22 AM, Mohammad Amir : Update :- As I checked materials are transferring still but it shows Offline. Thank you very much! May 21, 2025 at 7:22 AM, Ynja/ivancsa FA : It is online now May 21, 2025 at 7:23 AM, Mohammad Amir : Thank you very much! Now it is back to online mode. May 21, 2025 at 7:23 AM, Mohammad Amir : Good morning, I am working on it. May 21, 2025 at 7:23 AM, Baek Hojong(백호종)FA : What do you mean offline? It's being returned normally. May 21, 2025 at 7:31 AM, QuangPhan : Thank you May 21, 2025 at 7:33 AM, Mohammad Amir : Sir, It was showing offline mode in MCS that's why materials flow was not showing in MCS. Now it has been fixed and materials flow has been normalized. At 7:19- Interail-Control State remote message also received it was manually originated. At 7:19 we see TScState request by username :-EIF07_CELL_CNV_P We are investigating further. Thank you very much! May 21, 2025 at 7:34 AM, Mohammad Amir : You are welcome! May 21, 2025 at 7:35 AM, Baek Hojong(백호종)FA : Thanks May 21, 2025 at 7:35 AM, Mohammad Amir : Please inform me , The current empty trays located at E0CNVA52_M07 and M09. Thank you very much! May 21, 2025 at 7:36 AM, Mohammad Amir : You are welcome! May 21, 2025 at 7:38 AM, Kertész Dániel : Yes, on the M07 there is the LTA0104 and on the M09 there is the LTA1345. Both trays are emptyempty. May 21, 2025 at 7:38 AM, Mohammad Amir : Thank you very much for the information. I am working on it. May 21, 2025 at 7:42 AM, Mohammad Amir : Could you please try Rackin again for these two carriers. Thank you very much! May 21, 2025 at 7:46 AM, Mohammad Amir : Sir, Investigation result :- We witnessed the offline issue in C1CNV072. Cause it was set to Offline by operator at 6:57 and we faced issue. Afterwards at 7:19 it was set back to online mode and process was back to normal as I informed you earlier. Thank you very much! May 21, 2025 at 7:52 AM, Kertész Dániel : We found the solution for the problem, thank you for the help! May 21, 2025 at 7:52 AM, Mohammad Amir : Issue has been resolved ✅ Now both empty empty carriers on their way to STK. I am monitoring. Thank you very much! May 21, 2025 at 7:52 AM, Mohammad Amir : You are welcome! May 21, 2025 at 7:58 AM, Mohammad Amir : Could you please also confirm me LTA0290 located at E0CNVA52_M10,is it also empty empty or full? It is also waiting for a long time. Thank you very much! May 21, 2025 at 8:00 AM, Kertész Dániel : It's a full tray. May 21, 2025 at 8:00 AM, Mohammad Amir : Thank you very much for the confirmation. May 21, 2025 at 8:15 AM, Sazzad Bhai SKon : Good morning @FA, Please check the following duplicated plates: Plate1: UNKDUP-MLC4114-A (C1STKC72, 0100305) Plate2: UNKDUP-MLC4114-B (C1STKC72, 0100202) Plate3: DUP25052011 (C1STKC72, 0205601) thank you May 21, 2025 at 8:19 AM, Mohammad Amir : @Kertész Dániel @FA Please check E0STKC51_M10/M10_OP01 there is INV-01 RunTime over error . Thank you very much! May 21, 2025 at 8:23 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 21, 2025 at 8:25 AM, T. Gàbornè C SL NC : @fA Please check CA VD 6_06 no start machine pleas move the palett in the Storage. Thank you. May 21, 2025 at 8:26 AM, Sazzad Bhai SKon : @FA It is suspected that magazine MA2358 is duplicated in two plates. Please check the plate and confirm their magazines. MLA4184 (C1STKA72, 0205806) And MLA4104 (C1STKA72, 0200203) May 21, 2025 at 8:26 AM, F.A.briczius Gergő : Solved May 21, 2025 at 8:26 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 8:27 AM, F.A.briczius Gergő : You are welcome May 21, 2025 at 8:30 AM, QuangPhan : Hello! Dear @FA @AGV Could you please check AGV provide empty Mgz for NC AN 4/2. Empty mgz is out. Thank you. May 21, 2025 at 8:30 AM, Mohammad Amir : Checking May 21, 2025 at 8:32 AM, Mohammad Amir : Issue has been resolved ✅. Empty magazine on the way to NC AN 4-2 on AGV#10. I am monitoring. Thank you very much! May 21, 2025 at 8:33 AM, QuangPhan : Thank you! May 21, 2025 at 8:33 AM, Mohammad Amir : You are welcome! May 21, 2025 at 8:36 AM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_P08 there is Data mismatch error and because of this issue empty magazine delivery speed has been affected. Thank you very much! May 21, 2025 at 8:37 AM, T. Gàbornè C SL NC : @fa Please check CA NC AGV #10. Servo problem Thx May 21, 2025 at 8:39 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 00 Pre STK > VD • Anode: 32 • Cathode: 03 Post STK > Stacking • Anode: 45 • Cathode: 138 GF NC reel Available lot 4/5 line • AN: 68 • CA: 118 Thank you very much! May 21, 2025 at 8:44 AM, Mohammad Amir : @Lajos Gábor F.A. Please check E0CNVC52_M06 there is STP-01 Up Error. Thank you very much! May 21, 2025 at 8:54 AM, QuangPhan : Hello! @FA NC CA AGV #4 error. Thanks May 21, 2025 at 9:00 AM, Lajos Gábor F.A. : Done May 21, 2025 at 9:02 AM, KIM SEYEON [김세연]_FA : 05/21 Day shift 1F-Chinges Tuya GF-Yanjaa Zulaa May 21, 2025 at 9:03 AM, Mohammad Amir : @FA @Lajos Gábor F.A. Please check E0CNVA52_M07 there is Data mismatch error. Thank you very much! May 21, 2025 at 9:04 AM, Lajos Gábor F.A. : Working on it May 21, 2025 at 9:04 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 9:06 AM, Lajos Gábor F.A. : Done May 21, 2025 at 9:07 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 9:07 AM, Lajos Gábor F.A. : Your welcome May 21, 2025 at 9:42 AM, Sazzad Bhai SKon : @Zulaa/졸라/Ivancsa FA Could you please rack out them in manual port and confirm the magazines? May 21, 2025 at 9:49 AM, Baek Hojong(백호종)FA : @Ynja/ivancsa FA GF C1CNV072 P01 PORT Check plz MLA4163 not moving May 21, 2025 at 9:55 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 00 Pre STK > VD • Anode: 35 • Cathode: 02 Post STK > Stacking • Anode: 51 • Cathode: 143 GF NC reel Available lot 4/5 line • AN: 67 • CA: 135 Thank you very much! May 21, 2025 at 10:07 AM, Mohammad Amir : @Kertész Dániel @FA Please check E0CNVA52_RTV01 there is Load start dest unload not busy time over error and it has blocked the reels delivery. Thank you very much! May 21, 2025 at 10:11 AM, QuangPhan : Hello! Dear @FA @AGV Could you please check AGV provide empty Mgz for NC AN line 4, line 5, line 6. Empty mgz is out. Thank you. May 21, 2025 at 10:11 AM, Mohammad Amir : Checking May 21, 2025 at 10:15 AM, Mohammad Amir : AGV# 5 on the way to 5-2 . AGV#10 on the way to 5-3. AGV#8 on the way to 6-2. And three more empty magazine on the way to 4-3 ,6-1,5-1. I have provided priority to empty magazine delivery soon you will start receiving. I am monitoring this area. Thank you very much! May 21, 2025 at 10:15 AM, Ynja/ivancsa FA : done May 21, 2025 at 10:20 AM, Mohammad Amir : @FA @Lajos Gábor F.A. Please check E0STKC52_C01 there is Load Oversize error. Thank you very much! May 21, 2025 at 10:20 AM, F.A.briczius Gergő : I am on way May 21, 2025 at 10:21 AM, Mohammad Amir : Thank you very much! May 21, 2025 at 10:33 AM, QuangPhan : Thank you so much! May 21, 2025 at 10:34 AM, Mohammad Amir : You are welcome! Feel free to contact me again if you face issue in production. Thank you very much! May 21, 2025 at 10:34 AM, Kertész Dániel : @Sazzad Bhai SKon Can you check why the E0CNV52_RTV01 is not moving the material? May 21, 2025 at 10:34 AM, Mohammad Amir : Checking. May 21, 2025 at 10:34 AM, Kertész Dániel : with the material* May 21, 2025 at 10:44 AM, Ynja/ivancsa FA : done May 21, 2025 at 10:45 AM, QuangPhan : @Mohammad Amir Please, prioritize empty mgz for AN line 4. been out of empty mgz for a while. Thank you! May 21, 2025 at 10:47 AM, Sazzad Bhai SKon : Could you please share the plate id? It was MLC4114 ? May 21, 2025 at 10:48 AM, Mohammad Amir : Please transfer this tray manually to Anode STK. As currently the Full Tray LTA1266 is located at E0CNC52_RTV01 ,it is Anode tray on Cathode RTV that's why we are facing issues. This Anode Tray LTA1266 was manually installed on E0CNVC52_RTV01 at 10:33. Thank you very much! May 21, 2025 at 10:48 AM, Ynja/ivancsa FA : MLC4215 May 21, 2025 at 10:48 AM, Mohammad Amir : Sure , I am working on it. Thank you very much! May 21, 2025 at 10:48 AM, Sazzad Bhai SKon : And the other? May 21, 2025 at 10:49 AM, Ynja/ivancsa FA : Plate3 changed id MLC4214 May 21, 2025 at 10:49 AM, Sazzad Bhai SKon : If all three plates have different id, please restock them from manual port. May 21, 2025 at 10:51 AM, Ynja/ivancsa FA : It has already been restocked May 21, 2025 at 10:52 AM, Mohammad Amir : AGV# 1 on the way to line -4. Currently other machines in line -4 waiting for Empty magazine to arrive at Gantry ,I will provide more priority to it. I am monitoring. Thank you very much! May 21, 2025 at 10:54 AM, QuangPhan : Thank you so much! May 21, 2025 at 10:56 AM, Mohammad Amir : You are welcome! May 21, 2025 at 10:59 AM, Mohammad Amir : This message was deleted. May 21, 2025 at 10:59 AM, Mohammad Amir : This issue has been resolved ✅. Thank you very much @Kertész Dániel ! May 21, 2025 at 11:02 AM, QuangPhan : Hello! Dear @FA @AGV Please, solve the problem in NC AN 4/1 area. Every time AGV goes to line 4 it will get stuck due to obstruction. But in reality there is no obstruction on the route that AGV goes through. May 21, 2025 at 11:02 AM, QuangPhan : This error has appeared many times today. Thank you so much! May 21, 2025 at 11:03 AM, Mohammad Amir : AGV#4 and AGV#9 on the way to Line-4-1 with empty magazine ✅. Thank you very much! May 21, 2025 at 11:04 AM, Mohammad Amir : Please help me with one information:- Are C4NCA020_P04 and C4NCA030_P04 empty physically? Thank you very much! May 21, 2025 at 11:07 AM, Ynja/ivancsa FA : As this is an AGV sensor issue, I believe the Korean engineers will take care of it soon. 😉 May 21, 2025 at 11:09 AM, QuangPhan : Yes, thank you May 21, 2025 at 11:11 AM, QuangPhan : Yes, it is empty May 21, 2025 at 11:11 AM, Mohammad Amir : Thank you very much for the confirmation. May 21, 2025 at 11:12 AM, QuangPhan : You are welcome! May 21, 2025 at 11:20 AM, QuangPhan : Hello! @Mohammad Amir Please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 21, 2025 at 11:20 AM, 이도형 (Lee) : @FA "Please check why every AGV stops at Anode 4-1, passing through ports P01 and P02." May 21, 2025 at 11:20 AM, Mohammad Amir : Checking May 21, 2025 at 11:23 AM, T. Gàbornè C SL NC : @MCS NC CA 4/1, 5/1 6/1, 6/2 empty mgz wait,AGV no move, please check. Thank you. May 21, 2025 at 11:23 AM, Sazzad Bhai SKon : Checking May 21, 2025 at 11:26 AM, Sazzad Bhai SKon : For 4/1 line there was LR and job completed at 11:18 May 21, 2025 at 11:26 AM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check for NC AN 2-2 _P01 ,MA2415 ,AGV #2 has assigned at 10:52 after unassigned at 10:56 AGV#4 assigned and Unassigned. 10:58 AGV#2 assigned and unassigned.11:17 AGV#3 assigned and unassigned. 11:19 AGV#8 assigned and unassigned. 11:20 AGV#9 assigned and unassigned. 11:23 AGV#10 assigned. Please check this phenomena it is causing delays in full magazine transfer. This is abnormal situation, please investigate. Thank you very much! May 21, 2025 at 11:27 AM, Mohammad Amir : Please confirm me which Magazine actually exists at C2NCA020_P02? Thank you very much! May 21, 2025 at 11:28 AM, T. Gàbornè C SL NC : 4/3 stop ,no mgz May 21, 2025 at 11:28 AM, Sazzad Bhai SKon : For 6/1 there is job. But for other line "no search lot available" May 21, 2025 at 11:28 AM, Sazzad Bhai SKon : There is a job for 4/3 line May 21, 2025 at 11:29 AM, Mohammad Amir : For 2-2 NC AN P01, Issue has been resolved ✅. AGV#10 finally picked the full Magazine. Please provide me information for P02? Which Magazine actually exists there? Thank you very much! May 21, 2025 at 11:30 AM, Sazzad Bhai SKon : Please be understand that , there is only 6 outbound ports who can deliver empty magazines. And we have 10 AGVs only. AGV also does UR jobs as well. We will keep monitoring May 21, 2025 at 11:31 AM, Mohammad Amir : We have provided more priority to 4-3 NC CA . Soon you will receive the empty magazine. I will manage the CA NC area as well together with AN. Thank you very much! May 21, 2025 at 11:33 AM, Sazzad Bhai SKon : And among 10 AGVs, 1 AGV has been removed. So only 9 AGV operating at the moment May 21, 2025 at 11:34 AM, QuangPhan : 1 full mgz row has been taken by AGV. but there is still 1 row on the right that has not been taken. Thanks May 21, 2025 at 11:36 AM, Mohammad Amir : Yes please I need confirmation for this. Please provide me information for P02 which carrier actually exists there? Thank you very much! May 21, 2025 at 11:36 AM, Mohammad Amir : Please check this message. Thank you very much! May 21, 2025 at 11:36 AM, Sazzad Bhai SKon : Additionally AGV 07 is standing idle with an UNK carrier! Please transfer it to gantry May 21, 2025 at 11:39 AM, QuangPhan : do you mean all mgz barcodes? May 21, 2025 at 11:42 AM, Mohammad Amir : Yes please. Thank you very much! May 21, 2025 at 11:43 AM, QuangPhan : right MA6398, MA4309, MA5531, MA6179, MA5390, MA3483 left MA6532, MA6058, MA6508, MA4102, MA3114, MA4329 Thank you! May 21, 2025 at 11:48 AM, Mohammad Amir : Issue has been resolved ✅ AGV#7 has picked the Full Magazine. Feel free to contact me again if you need any further assistance. Thank you very much! May 21, 2025 at 11:56 AM, QuangPhan : Thank you so much May 21, 2025 at 11:56 AM, Mohammad Amir : You are welcome! May 21, 2025 at 11:58 AM, Mohammad Amir : This message was deleted. May 21, 2025 at 11:58 AM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_C02 there is Load Oversize error. Thank you very much! May 21, 2025 at 12:03 PM, Lajos Gábor F.A. : Done May 21, 2025 at 12:03 PM, Mohammad Amir : Thank you very much! May 21, 2025 at 12:18 PM, T. Gàbornè C SL NC : @MCS CA 5#1 machine stop 11:22 no empty mgz pleas check. Thank you. May 21, 2025 at 12:18 PM, Mohammad Amir : Checking May 21, 2025 at 12:20 PM, Mohammad Amir : There is no issue found , everything seems normal ✅ There is an Active LR however there is no empty magazine available at the Gantry O/P ports at the moment which is free to transfer. As soon as Magazine will come at the O/P ports of Gantry ,jobs will be created. Thank you very much! May 21, 2025 at 12:21 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 76 • Cathode: 00 Pre STK > VD • Anode: 36 • Cathode: 00 Post STK > Stacking • Anode: 56 • Cathode: 147 GF NC reel Available lot 4/5 line • AN: 66 • CA: 139 Thank you very much! May 21, 2025 at 12:24 PM, QuangPhan : Hello! @FA @AGV Please let me know the reason for the stop of the area in Outline and inline area on NC AN 2/1. It seems that AGV is not providing empty mgz to this machine. Thank you so much! May 21, 2025 at 12:26 PM, Mohammad Amir : For your information: There is an active LR from this machine for empty magazine. However currently this machine is set to Out of service,could you please check. Thank you very much! May 21, 2025 at 12:31 PM, 이도형 (Lee) : @FA C1CNVC71 P11, P14 PORT Checking May 21, 2025 at 12:37 PM, QuangPhan : Hello! @Mohammad Amir Full mgz overload problem continues on NC AN 5/1. please check, i will provide mgz barcodes for you. May 21, 2025 at 12:38 PM, Mohammad Amir : I am checking. No need to provide mgz barcodes. Thank you very much! May 21, 2025 at 12:38 PM, QuangPhan : Thank you! May 21, 2025 at 12:39 PM, Mohammad Amir : You are welcome! May 21, 2025 at 12:39 PM, Lajos Gábor F.A. : @MCS E0CNVA52_M07, LTA0347. There is MCS buzzer. Can you check it please? May 21, 2025 at 12:39 PM, QuangPhan : Same as NC AN 5/3 May 21, 2025 at 12:40 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Everything is good from MCS RTD side ✅. Please check for 5-1 NC AN P01 there is AGVs assignment and unassignment issue since 11:56. Thank you very much! May 21, 2025 at 12:40 PM, Mohammad Amir : Checking May 21, 2025 at 12:40 PM, Mohammad Amir : I am checking May 21, 2025 at 12:42 PM, Mohammad Amir : @MES Please check we are receiving MES error - this is a lot that has already been received from the warehouse. Carrier -LTA0347 Location E0CNVA52_M07 Because of this error you witnessed buzzer @Lajos Gábor F.A. Thank you very much! May 21, 2025 at 12:44 PM, Mohammad Amir : For 5-1 NC AN _P02 , AGV#5 has assigned. ✅ Thank you very much! May 21, 2025 at 12:44 PM, T. Gàbornè C SL NC : Still didn't get the 5#1 empty mgz. For a long time, the machine has been, please see, there is no problem with the tasks . Thank you for much. May 21, 2025 at 12:45 PM, QuangPhan : Thank you! May 21, 2025 at 12:45 PM, Mohammad Amir : I am checking May 21, 2025 at 12:46 PM, Mohammad Amir : For 5-3 NC AN _P01 Issue has been resolved ✅ AGV#4 on the way. Thank you very much! May 21, 2025 at 12:47 PM, Mohammad Amir : You are welcome! May 21, 2025 at 12:48 PM, Mohammad Amir : For NC CA 5-1 _P04 , As now there is Empty magazine available so AGV#10 on its way with empty magazine. For P03, It stills wait the Empty magazine at Gantry O/P ports. Process is normal,no issue found ✅. Thank you very much! May 21, 2025 at 12:49 PM, Ynja/ivancsa FA : i think it is okay May 21, 2025 at 12:53 PM, Mohammad Amir : Now it is okay , Thank you very much. Could you please investigate, Why for MA3046 at 5-1 NC AN _P01 , AGV#07 assigned at 11:56 and then unassigned. AGV#10 assigned at 12:10 and then unassigned. AGV#5 assigned at 12:11 and then unassigned. AGV#4 assigned at 12:36 and then unassigned. 12:43 AGV#10 assigned and carry on the task. Because of this issue there was significant delay in full magazine transfer. Please investigate this phenomena. Thank you very much! May 21, 2025 at 12:54 PM, Mohammad Amir : If you need any information or assistance feel free to contact me. Thank you very much! May 21, 2025 at 12:57 PM, Mohammad Amir : This message was deleted. May 21, 2025 at 12:57 PM, Mohammad Amir : For you information: Currently available empty magazine:- Anode :-72 Cathode :-00 Thank you very much! May 21, 2025 at 12:59 PM, T. Gàbornè C SL NC : Thank you for information. May 21, 2025 at 12:59 PM, Mohammad Amir : You are welcome! May 21, 2025 at 1:52 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 71 • Cathode: 00 Pre STK > VD • Anode: 28 • Cathode: 01 Post STK > Stacking • Anode: 62 • Cathode: 155 GF NC reel Available lot 4/5 line • AN: 67 • CA: 147 Thank you very much! May 21, 2025 at 2:56 PM, T. Gàbornè C SL NC : @Fa Please check CA AGV #4 Front RSL detect error Thank you for much May 21, 2025 at 3:10 PM, Mohammad Amir : This message was deleted. May 21, 2025 at 3:15 PM, 이도형 (Lee) : @FA VD AN 5-5 우측 안착불량. AGV. 재안착해주세요 VD AN 5-5 Right side fixing fault. AGV. Please re-fix. May 21, 2025 at 3:22 PM, 이도형 (Lee) : @FA VD An #1 AGV ERROR. Please check. May 21, 2025 at 3:23 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 62 • Cathode: 00 Pre STK > VD • Anode: 18 • Cathode: 02 Post STK > Stacking • Anode: 83 • Cathode: 158 GF NC reel Available lot 4/5 line • AN: 56 • CA: 149 Thank you very much! May 21, 2025 at 3:46 PM, 최정한.KOVA : GF. VD AN 4,5,6LINE Please empty the sub-barrel. May 21, 2025 at 3:47 PM, T. Gàbornè C SL NC : @FA Please help me CA VD 6_06 machine no start, please send the palett in the Storage. Thank you for much. May 21, 2025 at 3:50 PM, 김주연 : Do you want to stop VD machine and return the plate? May 21, 2025 at 3:55 PM, T. Gàbornè C SL NC : VD machine no start, yes return the plate. May 21, 2025 at 4:02 PM, 김주연 : @mcs Plz return the plate to post vd storage May 21, 2025 at 4:08 PM, Mohammad Amir : Dear Ma'am Jobs have been created successfully to transfer these carriers to Post VD STK. ✅ Thank you very much! May 21, 2025 at 4:19 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1CNV072_16_154 there is Data Loss error. It is blocking stacking materials delivery. Thank you very much! May 21, 2025 at 4:35 PM, Kateryna SSL C : Hello! @Mohammad Amir Could you please share available lot for GF? Thank you! May 21, 2025 at 4:35 PM, 김지수PM(Gyuri)_FA invited 김 민성. May 21, 2025 at 4:37 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 50 • Cathode: 00 Pre STK > VD • Anode: 30 • Cathode: 00 Post STK > Stacking • Anode: 82 • Cathode: 167 GF NC reel Available lot 4/5 line • AN: 54 • CA: 144 Thank you very much! May 21, 2025 at 5:01 PM, T. Gàbornè C SL NC : @MCS How much empty mgz do you see in front of NC? Thank you for much the information. May 21, 2025 at 5:02 PM, Mohammad Amir : Checking! May 21, 2025 at 5:03 PM, Mohammad Amir : For NC:- Anode:-49 Cathode-05 Thank you very much! May 21, 2025 at 5:42 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 50 • Cathode: 11 Pre STK > VD • Anode: 19 • Cathode: 02 Post STK > Stacking • Anode: 91 • Cathode: 173 GF NC reel Available lot 4/5 line • AN: 59 • CA: 158 Thank you very much! May 21, 2025 at 6:15 PM, Jun(정우준)_SKOH FA : Night shift 05.21 18:00-06:00 Jeong woojun Assem GF CHOI Myoungwoon May 21, 2025 at 6:24 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (2): Magyar Balázs, Novák Károly Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 21, 2025 at 6:34 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 25 Pre STK > VD • Anode: 23 • Cathode: 02 Post STK > Stacking • Anode: 88 • Cathode: 158 GF NC reel Available lot 4/5 line • AN: 56 • CA: 155 Thank you May 21, 2025 at 7:09 PM, Simon Dávid D SL NC : @FA hello C0PVC020 error ,megnéznétek köszönöm May 21, 2025 at 7:15 PM, Shakir (MCS) : @Fa Please check E0CNVC52_09_007/008, Data loss error and Tray abnormal error. Also E0CNVA52_RTV1 Cv01 Run time over alarm. Thank you May 21, 2025 at 7:16 PM, Simon Dávid D SL NC : @FA hello NC CA 51-es reel raktárnál megált az egyik tray ,megnéznétek köszönöm May 21, 2025 at 7:24 PM, Shakir (MCS) : @FA Please check C1CNV072_16_153 there is Data Loss error. Thank you May 21, 2025 at 7:35 PM, Dariimaa/다리마/Ivancsa : Solved May 21, 2025 at 7:42 PM, Shakir (MCS) : @FA Please check C1STKC71_P08 INV RUN time over error. Thank you May 21, 2025 at 8:04 PM, Shakir (MCS) : @FA Please check C1CNV072_P35 is OOS Thank you May 21, 2025 at 8:11 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 25 Pre STK > VD • Anode: 34 • Cathode: 00 Post STK > Stacking • Anode: 76 • Cathode: 163 GF NC reel Available lot 4/5 line • AN: 49 • CA: 150 Thank you May 21, 2025 at 8:14 PM, Dariimaa/다리마/Ivancsa : Solved May 21, 2025 at 8:41 PM, Lika : Hello, please check NGV station 2/19, it hasn't picked up material for about an hour 🙏 May 21, 2025 at 8:47 PM, Shakir (MCS) : Hello, Please press UR, Last UR at 19:52, which has been Completed Thank you May 21, 2025 at 8:55 PM, Simon Dávid D SL NC : @Shakir (MCS) @FA hallo NC CA 5/1-es gépnél nem visszi el az AGV a full magazinokat megnéznétek,köszönöm May 21, 2025 at 8:59 PM, Shakir (MCS) : AGV 02 already pict up the full mgz from the 5-1 o/p port. Thank you May 21, 2025 at 9:13 PM, Shakir (MCS) : @Fa Please check E0CNVA52_RTV1 , there is Unload start Dest, unload not busy time over. Thank you May 21, 2025 at 9:31 PM, 전 운 (Jeon Woon) : @FA GF AN쪽 Stack 순환C/V BCR 점검 좀 부탁드려도 될까요? 저희쪽 설비에서 Magazine 정상 마감이 되었고 Plate, Magazine Barcode도 이상없는것들이 자주 Out Port로 나오고 있습니다. Ca측 메뉴얼Port로 투입시 정상 투입 확인했습니다. May 21, 2025 at 9:33 PM, Jun(정우준)_SKOH FA : 확인해보겠습니다. May 21, 2025 at 10:00 PM, 인제(Hwang) : NC Ca Robot#3 Error May 21, 2025 at 10:01 PM, Simon Dávid D SL NC : @FA hello NC CA 6/1 #5 AGV error ,megnéznétek ,köszönöm May 21, 2025 at 10:31 PM, 카스텔 발라지 F.A. : Good evening! Please share again. May 21, 2025 at 10:36 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 25 Pre STK > VD • Anode: 71 • Cathode: 00 Post STK > Stacking • Anode: 60 • Cathode: 160 GF NC reel Available lot 4/5 line • AN: 39 • CA: 154 Thank you May 21, 2025 at 10:41 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 is OOS. Thank you May 21, 2025 at 10:43 PM, 카스텔 발라지 F.A. : Solved May 21, 2025 at 10:49 PM, 김현태 : NC CA AGV #7 error. Thanks May 21, 2025 at 11:02 PM, 김현태 : NC CA AGV #4 error. Thanks May 21, 2025 at 11:06 PM, Dariimaa/다리마/Ivancsa : Solved May 21, 2025 at 11:40 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 29 • Cathode: 13 Pre STK > VD • Anode: 84 • Cathode: 01 Post STK > Stacking • Anode: 64 • Cathode: 150 GF NC reel Available lot 4/5 line • AN: 32 • CA: 159 Thank you May 22, 2025 at 12:16 AM May 22, 2025 at 12:16 AM, Simon Dávid D SL NC : @FA hello NC Ca 2/1 #4 AG error,megnéznétek köszönöm May 22, 2025 at 12:43 AM, Simon Dávid D SL NC : @FA hello NC Ca 4/1 megált a magazin emelő megnéznétek,köszönöm May 22, 2025 at 12:50 AM, Shakir (MCS) : There is an Active LR however there is no empty magazine available at the Gantry O/P ports at the moment which is free to transfer. As soon as Magazine will come at the O/P ports of Gantry ,jobs will be created. Thank you very much! May 22, 2025 at 12:54 AM, 김현태 : NC CA AGV #10 error. Thanks May 22, 2025 at 1:09 AM, 김현태 : NC CA AGV #7 error. Thanks May 22, 2025 at 1:20 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 07 Pre STK > VD • Anode: 83 • Cathode: 03 Post STK > Stacking • Anode: 75 • Cathode: 141 GF NC reel Available lot 4/5 line • AN: 25 • CA: 151 Thank you May 22, 2025 at 1:24 AM, Shakir (MCS) : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you very much! May 22, 2025 at 1:38 AM, Simon Dávid D SL NC : @FA hello VD CA C1STKA71_c02 daru error,megnéznétek köszönöm May 22, 2025 at 1:38 AM, Zsurbej Zsolt F.A. : Megyünk May 22, 2025 at 1:49 AM, 전 운 (Jeon Woon) : @MCS Please 2Line Station Unit 17 UR May 22, 2025 at 1:51 AM, Shakir (MCS) : CA or AN? May 22, 2025 at 1:52 AM, 전 운 (Jeon Woon) : Ca May 22, 2025 at 1:54 AM, Cao thi my linh : This message was deleted. May 22, 2025 at 1:54 AM, Shakir (MCS) : Please press UR, ST C2STM170_P01 Last UR at 00:04 has been completed. Thank you May 22, 2025 at 1:54 AM, Cao thi my linh : GF NC AN AGV #7 error. Thanks May 22, 2025 at 2:18 AM, 김현태 : NC CA AGV #4 error. Thanks May 22, 2025 at 2:50 AM, Cao thi my linh : GF NC AN AGV #5 error. Thanks May 22, 2025 at 2:51 AM, Dariimaa/다리마/Ivancsa : working normally. May 22, 2025 at 3:06 AM, 인제(Hwang) : NC An Robot#1 Error May 22, 2025 at 3:15 AM, 전 운 (Jeon Woon) : This hasn't been resolved yet, Please initialize UR and LR once. May 22, 2025 at 3:16 AM, Dániel Hufnágel : Slowly there, sorry but we have a lot of things to do(boohoo) May 22, 2025 at 3:22 AM, 전 운 (Jeon Woon) : Don't worry, I took care of it. May 22, 2025 at 3:25 AM, Simon Dávid D SL NC : @Shakir (MCS) hello NC AN 2/2 nem viszi el az AGV a full magazinokat ,megnéznéd köszönöm May 22, 2025 at 3:31 AM, Shakir (MCS) : Job exist for 2/2, currently gantry ports OOS @FA please check robot1 Thank you May 22, 2025 at 3:38 AM, Dániel Hufnágel : Working now May 22, 2025 at 3:39 AM, Shakir (MCS) : AGV 03 pickup the full mgz from2-2 AN NC May 22, 2025 at 5:00 AM, Cao thi my linh : GF AN vonal 5, 2-2 AN MGZ Full, AGV kell a beszerzéshez, köszönöm May 22, 2025 at 5:07 AM, Shakir (MCS) : @FA @ACS Please check this, Job exists but AGV not assigned UNK carrier at 2-2 AN P02. Thank you May 22, 2025 at 5:09 AM, 카스텔 발라지 F.A. : all AGVs are currently busy May 22, 2025 at 5:18 AM, Dariimaa/다리마/Ivancsa : Solved May 22, 2025 at 5:19 AM, Shakir (MCS) : AGV05 picked up full mgz from 2-2 AN Thanm you May 22, 2025 at 5:25 AM, Cao thi my linh : Thank you May 22, 2025 at 5:25 AM, Shakir (MCS) : You’re welcome May 22, 2025 at 5:26 AM, 카스텔 발라지 F.A. : Yes but, it's a manual order. something is wrong with ports P2 and P1 on machine 2-2. We are working on a solution to the problem May 22, 2025 at 5:27 AM, Shakir (MCS) : Yes, Thank you May 22, 2025 at 5:37 AM, 카스텔 발라지 F.A. : As soon as all of the magazines have arrive, the CarrierID dissapareas May 22, 2025 at 5:40 AM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) VD AN 6-2 chamber has only 2 carriers Please check. May 22, 2025 at 5:55 AM, Shakir (MCS) : LR received successfully for remaining half. The ports are OOS on the RTD side that’s why jobs are not getting created,It should be reported from the equipment. May 22, 2025 at 5:57 AM, Mohammad Amir : @FA Please check C1CNV072_16_119 there is Data mismatch error it is blocking stacking materials delivery. Thank you very much! May 22, 2025 at 5:59 AM, Yon Ko/연커/ : Solved May 22, 2025 at 6:00 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 6:18 AM, Mohammad Amir : @FA @Yon Ko/연커/ Please check C1STKA71_P21 there is Tray data mismatch error and because of this materials recovery has stopped. Thank you very much! May 22, 2025 at 6:25 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 17 • Cathode: 01 Pre STK > VD • Anode: 49 • Cathode: 01 Post STK > Stacking • Anode: 63 • Cathode: 150 GF NC reel Available lot 4/5 line • AN: 25 • CA: 154 Thank you very much! May 22, 2025 at 6:26 AM, Yon Ko/연커/ : Working on it May 22, 2025 at 6:29 AM, Mohammad Amir : @FA @Yon Ko/연커/ Please also check E0CNVC52_RTV01 there is Run time Over Error ,it has stopped reels delivery. Thank you very much! May 22, 2025 at 6:34 AM, Lajos Gábor F.A. : Done May 22, 2025 at 6:34 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 6:34 AM, Yon Ko/연커/ : Both solved May 22, 2025 at 6:35 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 6:58 AM, QuangPhan : Hello! @Mohammad Amir Please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 22, 2025 at 6:59 AM, Mohammad Amir : This message was deleted. May 22, 2025 at 6:59 AM, Mohammad Amir : Good morning, Checking! May 22, 2025 at 7:06 AM, Mohammad Amir : We have received UR successfully for sending the full magazine from NC AN 2/2 to Gantry. Everything is good from our MCS RTD side ✅. However AGVs are not being assigned. @ACS @Yon Ko/연커/ Please check MA1340 located at C2NCA020_P01 for this at 6:38 AGV#6 has assigned and after unassigned and since then no other AGV is being assigned to complete the task. Because of this issue there is significant delay in transferring Full Magazine. Thank you very much! May 22, 2025 at 7:15 AM, Yon Ko/연커/ : Now AGV3 is on the way to C2NCA020_P01. May 22, 2025 at 7:15 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 7:19 AM, Mohammad Amir : AGV#3 has unassigned again. Please check. Thank you very much! May 22, 2025 at 7:19 AM, Yon Ko/연커/ : Im working on it. May 22, 2025 at 7:37 AM, Yon Ko/연커/ : AGV2 took the material from station 2-2. May 22, 2025 at 7:38 AM, Mohammad Amir : Thank you very much! May 22, 2025 at 7:47 AM, T. Gàbornè C SL NC : Good morning @FA Please check CA AGV #3 Servo step error Thank you May 22, 2025 at 7:51 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 01 Pre STK > VD • Anode: 66 • Cathode: 00 Post STK > Stacking • Anode: 59 • Cathode: 147 GF NC reel Available lot 4/5 line • AN: 40 • CA: 147 Thank you very much! May 22, 2025 at 7:57 AM, Mohammad Amir : @FA Please check E0STKA52_C01 there is STK Time over error. Thank you very much! May 22, 2025 at 7:57 AM, Kertész Dániel : Done May 22, 2025 at 8:08 AM, Mohammad Amir : @FA @Kertész Dániel Please check C1CNV072_16_154 there is Data Loss error. It is blocking stacking materials delivery. Thank you very much! May 22, 2025 at 8:16 AM, 이민재 : DONE May 22, 2025 at 8:16 AM, Mohammad Amir : Thank you very much Sir. May 22, 2025 at 8:32 AM, QuangPhan : Hello! Good morning! @FA NC AN 2/1 AGV #7 error. Thanks May 22, 2025 at 8:38 AM, QuangPhan : Hello! @Mohammad Amir Please check again on machine 2/2. the work on AGV is slow. This problem keeps happening. May 22, 2025 at 8:39 AM, Mohammad Amir : Checking May 22, 2025 at 8:39 AM, QuangPhan : Hello! Good morning! @FA NC AN 2/2 AGV #8 error. Thanks May 22, 2025 at 8:42 AM, Sazzad Bhai SKon : @FA Good morning Please check AgV 08 ,cathode notching May 22, 2025 at 8:46 AM, QuangPhan : Currently, the amount of full mgz on outline 2/2 is overloaded. May 22, 2025 at 8:46 AM, Mohammad Amir : For NC AN 2-2_P02, Unload received successfully at 7:29 and job created as well. However AGVs are not being assigned till now. Everything is good from MCS /RTD side. ✅ @ACS @Yon Ko/연커/ Could you please why still no AGV is being assigned to execute this task. However I noticed that even for other machine for example 2-3 NC AN,even unload Request received at 8:40 ,for this AGV#1 has already assigned. But for 2-2 NC AN_P02 still AGVs not assigned since 7:29 ,needs investigation. Thank you very mu May 22, 2025 at 9:05 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 00 Pre STK > VD • Anode: 72 • Cathode: 03 Post STK > Stacking • Anode: 44 • Cathode: 153 GF NC reel Available lot 4/5 line • AN: 25 • CA: 142 Thank you very much! May 22, 2025 at 9:15 AM, QuangPhan : @Mohammad Amir Currently, the delay from AGV is happening continuously. there are more machines 2/1 & 5/1 & 5/2. please check May 22, 2025 at 9:18 AM, Mohammad Amir : Please inform me ,is it full or empty magazine delay and also is it on the AN side or the Cathode side ? Thank you very much! May 22, 2025 at 9:21 AM, QuangPhan : The reason is in the full mgz on the outline Thank you so much May 22, 2025 at 9:21 AM, Mohammad Amir : Checking May 22, 2025 at 9:26 AM, QuangPhan : All machine on Anode. More 6/3 AN May 22, 2025 at 9:31 AM, Mohammad Amir : For all the mentioned machines UR received successfully and Job created successfully ✅. Everything is good from our MCS RTD side. @ACS @Yon Ko/연커/ Please check AGVs are being Constantly assigned and unassigned and not progressing to complete the task. AN NC side :- For 2-1:- AGVs are constantly being assigned and unassigned,first 8:05 AGV#6 assigned and unassigned,at 8:15 AGV#3 assigned and unassigned,at 8:25 AGV#9 assigned and unassigned,at 8:47 AGV#6 assigned and unassigned. May 22, 2025 at 9:31 AM, Mohammad Amir : at 8:49 AGV#10 assigned and unassigned,at 8:54 AGV#5 assigned and unassigned. And still no AGV carried out task to transfer Full Magazine. For 5/1 :- AGV #5 assigned at 8:46 and unassigned after no AGV assigned to do the task. For 5-2:- AGV#6 assigned at 8:54 and afterwards unassigned and till now no AGV has been assigned to it. Thank you very much! May 22, 2025 at 9:33 AM, Mohammad Amir : Same issue with 6-3 AN NC:- Since 8:11 AGVs are getting assigned and unassigned but not progressing to complete the task. @FA @ACS Please check this issue ,it is causing delays in full magazine transfer. Thank you very much! May 22, 2025 at 9:43 AM, QuangPhan : Dear @FA AN VD 6-5 #50 stopped temperature overheat Please send mgz warehouse, the technicians repair machine start. Thank you. May 22, 2025 at 10:05 AM, T. Gàbornè C SL NC : Dear @FA Please check CA AGV#10 ODSL #2 value abnormal Thank you May 22, 2025 at 10:16 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 00 Pre STK > VD • Anode: 68 • Cathode: 02 Post STK > Stacking • Anode: 46 • Cathode: 150 GF NC reel Available lot 4/5 line • AN: 47 • CA: 151 Thank you very much! May 22, 2025 at 10:45 AM, QuangPhan : Hello! Dear, @Mohammad Amir Please check empty mgz supply for NC AN 4/3. is running low. thank you May 22, 2025 at 10:45 AM, Mohammad Amir : Checking May 22, 2025 at 10:47 AM, Mohammad Amir : I have provided more priority to transfer of empty magazine to 4-3 NC AN P03. Soon you will receive the Empty magazine. I am monitoring. Thank you very much! May 22, 2025 at 10:50 AM, Mohammad Amir : AGV#5 has been assigned and on the way with empty magazine for 4-3_P03 port. Thank you very much! May 22, 2025 at 10:52 AM, Mohammad Amir : I would like to ask you are you using 4-3 _P04 ? Cause we did not receive any LR for empty magazine. Thank you very much! May 22, 2025 at 10:54 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN line 2, line 6. We didn’t recieved material for a while. Thank you May 22, 2025 at 10:55 AM, Mohammad Amir : Checking May 22, 2025 at 10:56 AM, QuangPhan : We are currently manufacturing all machines on line 4. May 22, 2025 at 10:57 AM, Mohammad Amir : Please press LR for 4-3 P04 port as well. We did not receive any request for empty magazine in recent time. Thank you very much! May 22, 2025 at 10:59 AM, Sazzad Bhai SKon : After operator initiated action, RTv is working normally now May 22, 2025 at 11:00 AM, Mohammad Amir : I have given priority to NC AN line-2 so you will start receiving Reels for this line soon. I am monitoring. Thank you very much! May 22, 2025 at 11:00 AM, QuangPhan : Thank you so much!. May 22, 2025 at 11:00 AM, Mohammad Amir : You are welcome! May 22, 2025 at 11:00 AM, QuangPhan : Thank you so much! May 22, 2025 at 11:01 AM, Mohammad Amir : @QuangPhan Please press LR for this port,you will start receiving more empty magazine for 4-3 line. Thank you very much! May 22, 2025 at 11:02 AM, QuangPhan : Done May 22, 2025 at 11:04 AM, Mohammad Amir : Please try again,we didn't receive LR. Thank you! May 22, 2025 at 11:25 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 00 Pre STK > VD • Anode: 74 • Cathode: 01 Post STK > Stacking • Anode: 60 • Cathode: 162 GF NC reel Available lot 4/5 line • AN: 59 • CA: 157 Thank you very much! May 22, 2025 at 11:44 AM, Mohammad Amir : @FA @CCS @상진 Please check C1CNV072 again set to Offline mode at 11:39 by CCS id "operator". Please make it online. Thank you very much! May 22, 2025 at 11:52 AM, Mohammad Amir : Several jobs for pending from Stacking machines because of C1VNV072 is offline. Thank you very much! May 22, 2025 at 11:58 AM, 하연철(HA YEONCHEOL)/ : Notching 음극 공 매거진 부족 순차 설비 정지중 입니다. 각 설비별 정지 시간 확인중 입니다. May 22, 2025 at 12:15 PM, Mohammad Amir : @FA @Chinges Fa Please check MLC4075 located at C1CNV072_P18 ,it is not moving and has blocked CA stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue on priority as there is shortages of CA materials at Line -4&5&6. Thank you very much! May 22, 2025 at 12:28 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+4 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 22, 2025 at 12:29 PM, Mohammad Amir : This message was deleted. May 22, 2025 at 12:37 PM, Mohammad Amir : @FA @Chinges Fa Please check MLA0084 located at C1CNV072_16_085 ,it is not moving and has blocked stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue on priority as there is shortages of materials at Line -4&5&6. Thank you very much! May 22, 2025 at 12:37 PM, Lajos Gábor F.A. : Done May 22, 2025 at 12:38 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 12:39 PM, Lajos Gábor F.A. : Now moving this too May 22, 2025 at 12:39 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 12:41 PM, Lajos Gábor F.A. : Your welcome! May 22, 2025 at 12:49 PM, T. Gàbornè C SL NC : @MCS CA NC waiting empty MGZ. Consigned, please how much empty mgz is in stock. Thank you very much May 22, 2025 at 12:52 PM, Sazzad Bhai SKon : @CCS please check data loss error at C1CNV072_P35 May 22, 2025 at 12:53 PM, Sazzad Bhai SKon : No lot available May 22, 2025 at 12:57 PM, 김희용 : @FA C1CNV072 - 16154 Track in Data Loss Error May 22, 2025 at 12:58 PM, 김희용 : There is a heavy backlog of plates May 22, 2025 at 1:00 PM, Yaroslav SL/C 6 line : @fa ST conveyor 456 lines Port IN M02 doesn’t work. We can’t put in conveyor empty mgz. Please check. Thanks May 22, 2025 at 1:02 PM, Sazzad Bhai SKon : Data mismatched error. Please remove and restock again May 22, 2025 at 1:05 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check stack conveyors May 22, 2025 at 1:06 PM, Sazzad Bhai SKon : data loss error at C1CNV072_P35, 20 plates on the CNV May 22, 2025 at 1:14 PM, Yon Ko/연커/ : Im working on it right now May 22, 2025 at 1:20 PM, KIM SEYEON [김세연]_FA : thanks May 22, 2025 at 1:26 PM, Yon Ko/연커/ : Solved May 22, 2025 at 1:26 PM, KIM SEYEON [김세연]_FA : thanks for your hard work May 22, 2025 at 1:27 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 32 • Cathode: 02 Post STK > Stacking • Anode: 99 • Cathode: 171 GF NC reel Available lot 4/5 line • AN: 53 • CA: 175 Thank you very much! May 22, 2025 at 1:29 PM, Mohammad Amir : Please check again there is again Data Loss error. Thank you very much! May 22, 2025 at 1:31 PM, Farkas Tamàs : Korean engineers are currently working on the problem. May 22, 2025 at 1:40 PM, 김주연 : @제조 스태킹 vd 음극 방면에 위치한 순환물류 m port에 나와잇는 플레이트 조치 부탁드립니다. May 22, 2025 at 1:52 PM, Kertész Dániel : GF AN VD-n VD gép kalibrálás miatt a termelési technikusok kérésére ideiglenesen letiltottuk a 37-39-es, és a 38-40-es node közötti szakaszt. May 22, 2025 at 1:56 PM, QuangPhan : Hello! @Mohammad Amir Please check empty magazine supply on NC AN line2, line 4, line5, line6. almost empty mgz May 22, 2025 at 1:56 PM, Mohammad Amir : Checking May 22, 2025 at 1:56 PM, Sazzad Bhai SKon : Currently next lot is 0! May 22, 2025 at 1:57 PM, Sazzad Bhai SKon : Magazine coming on 5th line May 22, 2025 at 1:58 PM, QuangPhan : Thank you for information! May 22, 2025 at 1:59 PM, Mohammad Amir : I have provided priority to empty magazine delivery at line 2,5 and 4. Soon you will start receiving the empty magazine. Currently AGV#9 on the way to 4-1 AN NC. Thank you very much! May 22, 2025 at 2:05 PM, Mohammad Amir : @FA @Kertész Dániel Please check E0CNVA52_RTV01 there is Data mismatch error. Thank you very much! May 22, 2025 at 2:16 PM, QuangPhan : Thank you for information! May 22, 2025 at 2:16 PM, Mohammad Amir : You are welcome! May 22, 2025 at 2:25 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC712_P13 there is Data Mismatch Error. Thank you very much! May 22, 2025 at 2:38 PM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKC52_C02 there is Fork#2 Driver error. Thank you very much! May 22, 2025 at 2:45 PM, Lajos Gábor F.A. : Done May 22, 2025 at 2:45 PM, Mohammad Amir : Thank you very much! May 22, 2025 at 2:50 PM, QuangPhan : Hello! @FA NC AN 2/1 AGV #7 error. Thanks May 22, 2025 at 2:55 PM, Kertész Dániel : Done May 22, 2025 at 3:02 PM, 하연철(HA YEONCHEOL)/ : CA 4-2 AGV#10 down @FA May 22, 2025 at 3:03 PM, Yon Ko/연커/ : @Chinges Fa @Tuya Ivancsa FA May 22, 2025 at 4:24 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 71 • Cathode: 00 Post STK > Stacking • Anode: 82 • Cathode: 217 GF NC reel Available lot 4/5 line • AN: 64 • CA: 201 Thank you very much! May 22, 2025 at 4:37 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check AN VD AGV#7 and AGV#2 are blocking each other and because of this other AGVs are waiting. Jobs are getting delayed. Thank you very much! May 22, 2025 at 4:56 PM, T. Gàbornè C SL NC : @Fa Please check VD CA 5_02 no take out the AGV. Thx May 22, 2025 at 4:58 PM, Mohammad Amir : Please try pressing UR again. In last UR Carrier id was reported as Null that's why AGV does come. Thank you very much! May 22, 2025 at 4:58 PM, Yon Ko/연커/ : @MCS please check NC AN AGV#02 is idle with full material. May 22, 2025 at 4:58 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 79 • Cathode: 03 Post STK > Stacking • Anode: 73 • Cathode: 226 GF NC reel Available lot 4/5 line • AN: 73 • CA: 201 Thank you very much! May 22, 2025 at 4:59 PM, Mohammad Amir : Checking May 22, 2025 at 5:01 PM, Mohammad Amir : It has automatic job to go to Anode Gantry -2. However Job was terminated at 15:50 that's why it is in an idle state. Please transfer it to Gantry I/P ports. Thank you very much! May 22, 2025 at 5:17 PM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKA52_C01 there is Travel Time over error. Thank you very much! May 22, 2025 at 5:28 PM, Mohammad Amir : @FA @Kertész Dániel Please check E0CNVA52_RTV01 Run time Over error. It has blocked Reels delivery. Thank you very much! May 22, 2025 at 5:34 PM, 김태헌 : ST in P01 AGV fork1 ld/ud error There are five AGVs stopped. please check May 22, 2025 at 5:57 PM, Shakir (MCS) : @ACS @FA Please check C0PVA020_P12, AGVs are being Constantly assigned and unassigned and not progressing to complete the task. Job is getting delayed for NC AN 4-1 emtpy mgz. Everything is good from our MCS RTD side. Thank you May 22, 2025 at 6:01 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 Run time Over error. Thank you May 22, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (1): Magyar Balázs, Holiday (1): Novák Károly Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: , Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt 1F: Kasztel Balázs, Kovács Szabolcs, Modul(2): Martina Dávid, Nagy Gábor, May 22, 2025 at 6:13 PM, 카스텔 발라지 F.A. : the AGV took them away 👍 May 22, 2025 at 6:15 PM, Jun(정우준)_SKOH FA : Night shift 05.22 18:00-06:00 Jeong woojun Assem GF CHOI Myoungwoon May 22, 2025 at 6:21 PM, Shakir (MCS) : @FA Please check AGV07 assigned to 5-3 NC CA empty mgz delivery but it is not moving for long time, Blocking by other AGV. Thank you May 22, 2025 at 6:21 PM, 카스텔 발라지 F.A. : @Simon Dávid D SL NC We will stop the 5-1 5-2 5-3 2-2 NC machines for a few minutes, we want to find the cause of the communication error at 2-2. May 22, 2025 at 6:22 PM, 카스텔 발라지 F.A. : AN* May 22, 2025 at 6:23 PM, Cao thi my linh : Yes May 22, 2025 at 6:24 PM, Shakir (MCS) : Now the AGV07 pick up emty mgz On the way to 5-3 CA Thank you @Dariimaa/다리마/Ivancsa May 22, 2025 at 6:29 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 54 • Cathode: 01 Post STK > Stacking • Anode: 100 • Cathode: 212 GF NC reel Available lot 4/5 line • AN: 67 • CA: 201 Thank you May 22, 2025 at 6:35 PM, 카스텔 발라지 F.A. : The machines have restarted. we are monitoring the ports May 22, 2025 at 6:37 PM, Cao thi my linh : Köszönöm May 22, 2025 at 6:55 PM, Dariimaa/다리마/Ivancsa : @MCS VD AN chamber 6-5 door is closed. Please delete the job. Thank you! May 22, 2025 at 6:57 PM, Shakir (MCS) : Jon has been cancelled as per request ✅ Thank you May 22, 2025 at 7:28 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 50 • Cathode: 02 Post STK > Stacking • Anode: 99 • Cathode: 200 GF NC reel Available lot 4/5 line • AN: 41 • CA: 200 Thank you May 22, 2025 at 7:49 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 Run time Over error. Thank you May 22, 2025 at 7:56 PM, Simon Dávid D SL NC : @Shakir (MCS) @FA hello 4/3 NC CA gépet nem tölti az AGV üres mgz-vel,megnéznéd köszönöm May 22, 2025 at 7:58 PM, Shakir (MCS) : AGV10 has been departed to 4/3 NC CA Thank you May 22, 2025 at 8:00 PM, Shakir (MCS) : There is some traffic in ag route that’s why you witnessed the delay. AGV10 having empty mgz on the way ✅ Thank you May 22, 2025 at 8:02 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 Run time Over error. Thank you May 22, 2025 at 8:39 PM, 김현태 : NC AN AGV #6 error. Thanks May 22, 2025 at 8:43 PM, Shakir (MCS) : @FA Please check E0STKC52_C02 there is Fork#2 Driver error. Thank you very much! May 22, 2025 at 9:06 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 40 • Cathode: 01 Post STK > Stacking • Anode: 104 • Cathode: 208 GF NC reel Available lot 4/5 line • AN: 36 • CA: 157 Thank you May 22, 2025 at 9:22 PM, 전 운 (Jeon Woon) : @FA C1CNV072 Stuck Plate Check Plz. May 22, 2025 at 10:37 PM, 최명운(CHOI MYOUNGWOON) : GF Stack An Circular Logistics Track16130 Diverter Belt is detached. Please take action by technician. May 22, 2025 at 10:38 PM, 카스텔 발라지 F.A. : We are on the way May 22, 2025 at 10:58 PM, 최명운(CHOI MYOUNGWOON) : Action completed May 22, 2025 at 11:16 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 46 • Cathode: 00 Post STK > Stacking • Anode: 102 • Cathode: 197 GF NC reel Available lot 4/5 line • AN: 27 • CA: 209 Thank you May 22, 2025 at 11:59 PM, Simon Dávid D SL NC : @FA hello NC CA #9 AGV error ,megnéznétek köszönöm May 23, 2025 at 12:04 AM May 23, 2025 at 12:04 AM, 김현태 : NC CA AGV #2 error. Thanks May 23, 2025 at 12:19 AM, 카스텔 발라지 F.A. : @Shakir (MCS) It seems we have successfully solved the communication problem at C2NCA020_P01. AGV#7 is on the way May 23, 2025 at 12:21 AM, Shakir (MCS) : Yes, Its showing carrier id instead of UNK. Thank you May 23, 2025 at 12:28 AM, Simon Dávid D SL NC : @Shakir (MCS) hello, 6 és 5 sor-ra nem vissz üres mgz-t a AGV ,megnéznéd köszönöm May 23, 2025 at 12:30 AM, Shakir (MCS) : CA or AN May 23, 2025 at 12:31 AM, Simon Dávid D SL NC : CA May 23, 2025 at 12:34 AM, Shakir (MCS) : For line 5 5-1 , 5-2 job has been initiated most of the AGV busy doing UR LR that why you witnessed delay. 5-1 AGV 07 on the way Thank you May 23, 2025 at 12:36 AM, Simon Dávid D SL NC : CA Line 6? May 23, 2025 at 12:37 AM, Shakir (MCS) : For Line 6 There is an Active LR however there is no empty magazine available at the Gantry O/P ports at the moment which is free to transfer. As soon as Magazine will come at the O/P ports of Gantry ,jobs will be created. Thank you May 23, 2025 at 1:06 AM, 김현태 : NC CA AGV #5 error. Thanks May 23, 2025 at 1:09 AM, Dariimaa/다리마/Ivancsa : Solved May 23, 2025 at 1:24 AM, Cao thi my linh : A GF AN üres tálca elfogyott, több támogatásra van szüksége a 2, 4, 5, 6 sorozathoz, köszönöm May 23, 2025 at 1:32 AM, Shakir (MCS) : There is an Active LR however there is no empty magazine available at the Gantry O/P ports at the moment which is free to transfer. As soon as Magazine will come at the O/P ports of Gantry ,jobs will be created. Thank you May 23, 2025 at 1:39 AM, Shakir (MCS) : 5-1, 4-1 and 2-1 Job has been initiated but all AGVsare busy in UR LR Thank you May 23, 2025 at 1:49 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 Run time Over error. Thank you May 23, 2025 at 2:51 AM, Cao thi my linh : Köszönöm May 23, 2025 at 3:26 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 00 Pre STK > VD • Anode: 26 • Cathode: 03 Post STK > Stacking • Anode: 113 • Cathode: 199 GF NC reel Available lot 4/5 line • AN: 50 • CA: 242 Thank you May 23, 2025 at 4:11 AM, 인제(Hwang) : Please move the plates of An VD 6-2 P03, P04 to the warehouse May 23, 2025 at 4:12 AM, Shakir (MCS) : @Dariimaa/다리마/Ivancsa Please send it to stk Thank you May 23, 2025 at 4:26 AM, 인제(Hwang) : @Dariimaa/다리마/Ivancsa Please also do An VD 2-3, 4-3 Thanks for your help! May 23, 2025 at 4:38 AM, Dariimaa/다리마/Ivancsa : Done May 23, 2025 at 4:41 AM, 인제(Hwang) : Thank you! May 23, 2025 at 4:42 AM, 김현태 : NC CA AGV #8 error. Thanks May 23, 2025 at 4:51 AM, Shakir (MCS) : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you very much! May 23, 2025 at 4:51 AM, 카스텔 발라지 F.A. : We are working on it May 23, 2025 at 5:18 AM, 김현태 : NC AN AGV #10 error. Thanks May 23, 2025 at 5:28 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 31 • Cathode: 02 Post STK > Stacking • Anode: 120 • Cathode: 209 GF NC reel Available lot 4/5 line • AN: 60 • CA: 253 Thank you May 23, 2025 at 5:35 AM, Simon Dávid D SL NC : @FA hello 2/2 NC CA #8AGV error,megnéznétek köszönöm May 23, 2025 at 5:47 AM, Simon Dávid D SL NC : @FA hello NC CA COPVC030 robot #3 error megnéznétek köszönöm May 23, 2025 at 5:51 AM, Böröczki Balázs : Igen, érkezünk. May 23, 2025 at 5:59 AM, Böröczki Balázs : Működik. May 23, 2025 at 6:10 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 3 Overtime ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 23, 2025 at 6:11 AM, 이주봉PM LEE JUBONG(FA) : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM Samkoo 이민재 최기수 May 23, 2025 at 6:42 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV0 It's OOS. Thank you May 23, 2025 at 6:51 AM, Yon Ko/연커/ : Hungarian technician working on it May 23, 2025 at 6:56 AM, Kéri Ildikó Detty : Sziasztok! NC An 5/1 szükség lenne segitségre nem működik a magazin szállitó! May 23, 2025 at 7:21 AM, 원재 : Nc An 5-1 agv m/g move error plz May 23, 2025 at 7:26 AM, Bonnyai Ákos : Már megy May 23, 2025 at 7:40 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 07 • Cathode: 00 Pre STK > VD • Anode: 20 • Cathode: 02 Post STK > Stacking • Anode: 121 • Cathode: 186 GF NC reel Available lot 4/5 line • AN: 61 • CA: 269 Thank you May 23, 2025 at 7:48 AM, Andrea Zentay : @MCS @FA Good morning, We need help. NC CA side: empty magazines not arrived in the mashines. This is how our production stops... May 23, 2025 at 7:54 AM, duzzaman Md (MCS) : There is no empty magazine available at the Gantry O/P ports at the moment which is free to transfer. As soon as Magazine will come at the O/P ports of Gantry ,jobs will be created. Thank you May 23, 2025 at 7:58 AM, Andrea Zentay : Thank you for the help and information. May 23, 2025 at 8:41 AM, duzzaman Md (MCS) : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you very much! May 23, 2025 at 8:53 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 10 • Cathode: 00 Pre STK > VD • Anode: 13 • Cathode: 02 Post STK > Stacking • Anode: 125 • Cathode: 188 GF NC reel Available lot 4/5 line • AN: 59 • CA: 265 Thank you May 23, 2025 at 8:55 AM, Sazzad Bhai SKon : @FA It is suspected that magazine MA2358 is duplicated in two plates. Please check the plate and confirm their magazines. MLA4184 (C1STKA72, 0105702) And MLA4104 (C1STKA72, 0105801) May 23, 2025 at 9:09 AM, 최정한.KOVA : VD AN 4,5,6라인 서브배럴 비워주세요. May 23, 2025 at 9:09 AM, 최정한.KOVA : Please empty the VD AN 4,5,6 line sub-barrels. May 23, 2025 at 9:14 AM, Sazzad Bhai SKon : Hi, could you please tell me machine name. Do we need to transfer them to post VD STK? May 23, 2025 at 9:21 AM, 최정한.KOVA : Please empty all VD AN lines 4,5,6 sub-barrels. May 23, 2025 at 9:23 AM, 최정한.KOVA : This message was deleted. May 23, 2025 at 9:23 AM, Sazzad Bhai SKon : I understand, sub barrel is not MCS part. @FA please help 🙏 May 23, 2025 at 9:23 AM, 최정한.KOVA : VD AN 4,5,6 lines are full of water. Please empty the sub-barrel. This does not mean emptying the magazine in the chamber. May 23, 2025 at 10:18 AM, 김주연 : @FA Gf anode vd post storage's out port are all oos plz check May 23, 2025 at 10:54 AM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_175 DATA MISSMATCH ERROR THANK YOU May 23, 2025 at 11:12 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 06 • Cathode: 00 Pre STK > VD • Anode: 31 • Cathode: 03 Post STK > Stacking • Anode: 112 • Cathode: 198 GF NC reel Available lot 4/5 line • AN: 44 • CA: 265 Thank you May 23, 2025 at 11:29 AM, 김주연 : @FA AGV C0PVC030_P02 MGZ. is UNK. THIS MGZ should go to mp port. Plz check why it isn't moving. And plz take off that mgz manually May 23, 2025 at 11:48 AM, 김주연 : It is still occupying the agv port @fa May 23, 2025 at 12:05 PM, 김주연 : This message was deleted. May 23, 2025 at 12:42 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 36 • Cathode: 00 Post STK > Stacking • Anode: 116 • Cathode: 188 GF NC reel Available lot 4/5 line • AN: 34 • CA: 273 Thank you May 23, 2025 at 12:48 PM, Sazzad Bhai SKon : MC1138 received a transfer command from C0PVC030_P12. it's on 5-3 line now May 23, 2025 at 12:53 PM, Sazzad Bhai SKon : @manufacturing. C1CNV072_M01 There are 6+ carriers waiting to unload. Please check M01 May 23, 2025 at 1:27 PM, duzzaman Md (MCS) : @FA E0stkc52_c01 Hoist time over error Thank you May 23, 2025 at 1:45 PM, Mr.Miti (미티) FA invited Sopronyi Gábor. May 23, 2025 at 2:08 PM, Sazzad Bhai SKon : @FA @manufacturing It is suspected that magazine MA2358 is duplicated in two plates. Please check the plate and confirm their magazines. MLA4184 (C1STKA72, 0105702) And MLA4104 (C1STKA72, 0105801) May 23, 2025 at 2:11 PM, 이민재 : I checked the barcode duplication, and the barcode is being replaced in the notching. May 23, 2025 at 2:12 PM, Sazzad Bhai SKon : Thank you for checking May 23, 2025 at 3:36 PM, 김희용 : @Sazzad Bhai SKon Please Check Available Materials Status GF NC CA No have materials In Robot May 23, 2025 at 3:38 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 04 • Cathode: 02 Post STK > Stacking • Anode: 154 • Cathode: 217 GF NC reel Available lot 4/5 line • AN: 64 • CA: 283 Thank you May 23, 2025 at 4:09 PM, 김희용 : @FA Please Check GF AN Reel Storage Track 7049 (E0STKA51_P02) (RTV Out Port) There is No error, But Don't move (LTA1192) May 23, 2025 at 4:30 PM, 이민재 : Done May 23, 2025 at 5:51 PM, Sazzad Bhai SKon : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 04 • Cathode: 00 Post STK > Stacking • Anode: 154 • Cathode: 205 GF NC reel Available lot 4/5 line • AN: 74 • CA: 291 Thank you May 23, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 11+2+1/12+1 Tech, 1SL Overtime(2): Kiss Balázs, Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(0): Translater: -- --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Hara May 23, 2025 at 6:20 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23. "B" műszak, 10+1+1/12+1 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Gerbovits Kevin Sick(0): Shift Change(1): Böröczki Balázs Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Harasztia Zoltán -------------- May 23, 2025 at 7:09 PM, VK (mcs) : @FA Please check Cathode Reel conveyor E0CNV052-M02 (9029) LTC1523 is not transferred. May 23, 2025 at 7:33 PM, 김현태 : NC AN AGV #5 error. Thanks May 23, 2025 at 7:44 PM, VK (mcs) : @FA Please check Cathode Pre-STK C71 Load oversize error. May 23, 2025 at 7:44 PM, M.Ferenc "B"Nc/Vd SL : @FA Hello! EOCNVC52_M02 port. May 23, 2025 at 7:44 PM, M.Ferenc "B"Nc/Vd SL : The empty reel carrier will not return. Please check. May 23, 2025 at 7:45 PM, VK (mcs) : This message was deleted. May 23, 2025 at 7:46 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B could you check reel storage Crane anode? May 23, 2025 at 7:46 PM, KIM SEYEON [김세연]_FA : which is oos. May 23, 2025 at 7:48 PM, 방혁 PM(Bang.Hyuk) FA : 52A창고 비가동입니다 May 23, 2025 at 7:51 PM, 방혁 PM(Bang.Hyuk) FA : 52A장고 조치됬습니다 May 23, 2025 at 7:51 PM, Csanálosi Gábor FA : Done May 23, 2025 at 7:52 PM, KIM SEYEON [김세연]_FA : thanks May 23, 2025 at 7:53 PM, KIM SEYEON [김세연]_FA : what was the problem? May 23, 2025 at 7:53 PM, Csanálosi Gábor FA : Fork error May 23, 2025 at 7:54 PM, 방혁 PM(Bang.Hyuk) FA : 포크 뻗던도증에 E0CNVA51 메뉴얼 전환되면서 포크 뻗고 멈춘 상황이였습니다 May 23, 2025 at 8:16 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please share available lot May 23, 2025 at 8:19 PM, Truong : This message was deleted. May 23, 2025 at 8:19 PM, Truong : This message was deleted. May 23, 2025 at 8:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 171 • Cathode: 198 GF NC reel Available lot 4/5 line • AN: 47 • CA: 292 May 23, 2025 at 8:31 PM, VK (mcs) : @FA @CCS Please check Circular conveyor C1CNV072 status is offline! May 23, 2025 at 8:34 PM, VK (mcs) : @방혁 PM(Bang.Hyuk) FA Please check it. May 23, 2025 at 8:36 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check stack conveyor May 23, 2025 at 8:37 PM, Csanálosi Gábor FA : Seems good now, probably she is alrady there. May 23, 2025 at 8:37 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA Can you check CNV51A _6055? May 23, 2025 at 8:37 PM, 방혁 PM(Bang.Hyuk) FA : *6045 May 23, 2025 at 8:38 PM, Csanálosi Gábor FA : Omw May 23, 2025 at 8:41 PM, M.Ferenc "B"Nc/Vd SL : @MCS NC Cathode side. 4/2 No empty magazine is coming to Notching machine. Please check. May 23, 2025 at 8:41 PM, Dariimaa/다리마/Ivancsa : @MCS ST AN C1CNV072_16_144 MLA0225 C1CNV072_16_162 MLA6101 ports do not have a destination. Please check it. Thank you! May 23, 2025 at 8:43 PM, VK (mcs) : No available material May 23, 2025 at 8:46 PM, VK (mcs) : Did you create a job for them? May 23, 2025 at 8:47 PM, Dariimaa/다리마/Ivancsa : Yes. Thank you! May 23, 2025 at 8:47 PM, KIM SEYEON [김세연]_FA : is it solved? May 23, 2025 at 8:48 PM, Dariimaa/다리마/Ivancsa : Yes. Solved May 23, 2025 at 8:48 PM, VK (mcs) : Jobs terminated by OP action and now it fixed by @Dariimaa/다리마/Ivancsa. Thx May 23, 2025 at 9:31 PM, 김현태 : NC CA AGV #4 error. Thanks May 23, 2025 at 9:36 PM, VK (mcs) : @FA Please check Anode reel STK A52 MCP auto/manual mode error. May 23, 2025 at 9:44 PM, 김현태 : NC CA AGV #1 error. Thanks May 23, 2025 at 9:51 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 04 • Cathode: 00 Post STK > Stacking • Anode: 203 • Cathode: 194 GF NC reel Available lot 4/5 line • AN: 47 • CA: 320 May 23, 2025 at 10:08 PM, VK (mcs) : @FA Please check Cathode reel STK C51 STK time over error. May 23, 2025 at 10:13 PM, VK (mcs) : @FA please check anode side reel STK A52 Load over size error. Thx May 23, 2025 at 10:25 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA E0CNVC52_09_08 Lifter error. Please check. May 23, 2025 at 10:37 PM, Csanálosi Gábor FA : Kész May 23, 2025 at 10:43 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 port M01 (7028) LTA1693 MCS doesn't receive a rack-out report! And status of Carrier still is full. But in CCS its empty. Can you please check actual status. Thx May 23, 2025 at 10:50 PM, Szücs Géza FT-B : Manual ports (M01-M10) are always used by manufacturing. May 23, 2025 at 11:00 PM, VK (mcs) : I am asking difference Status of carrier between MCS and CCS. May 23, 2025 at 11:01 PM, Rácz Dániel / FA : Miért nem ők jelentik le ? May 23, 2025 at 11:13 PM, 김지수PM(Gyuri)_FA : When we checked the playback, the lift was arrived GF, suddenly the lift location was detected 1F and then reel was released by manually. that's why the complete signal was not sent to RTD May 23, 2025 at 11:52 PM, VK (mcs) : @FA Please check Anode reel STKA52 There is no error but cranes are stopped. May 23, 2025 at 11:53 PM, Csanálosi Gábor FA : Checking May 23, 2025 at 11:54 PM, Csanálosi Gábor FA : Solved May 24, 2025 at 12:04 AM May 24, 2025 at 12:04 AM, Dariimaa/다리마/Ivancsa : This message was deleted. May 24, 2025 at 12:04 AM, Dariimaa/다리마/Ivancsa : @MCS ST CA C6STM110_P02 is full of material. Please delete the AGV#8 job. Thank you! May 24, 2025 at 12:05 AM, VK (mcs) : MLA1210 canceled May 24, 2025 at 12:06 AM, Dariimaa/다리마/Ivancsa : Should I return it to STK? May 24, 2025 at 12:07 AM, VK (mcs) : Yes. please send it to CNV anode ports May 24, 2025 at 12:15 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 207 • Cathode: 203 GF NC reel Available lot 4/5 line • AN: 80 • CA: 342 May 24, 2025 at 12:46 AM, Dariimaa/다리마/Ivancsa : @FA tech NC CA robot#1 error. Please check. May 24, 2025 at 1:00 AM, VK (mcs) : @FA Please check Anode reel conveyor A52 port-M09 (7036) LTA1422 has transfer command to STK but it is not moving. May 24, 2025 at 1:04 AM, Szücs Géza FT-B : E0STKA51_M09 Tr No.:6104 and not have material. and Manual ports are using the manufacturing May 24, 2025 at 1:06 AM, Böröcz Tamás : RTVre gondolt a költő May 24, 2025 at 1:06 AM, Böröcz Tamás : De már megy ha minden igaz May 24, 2025 at 1:06 AM, VK (mcs) : Its conveyor A52- 7036. Btw as I see someone created new job May 24, 2025 at 1:08 AM, Szücs Géza FT-B : az nem M, szal nem manuális port és a száma sem 7036 👌 May 24, 2025 at 1:10 AM, Rácz Dániel / FA : BWT ? May 24, 2025 at 1:11 AM, Böröcz Tamás : By the way May 24, 2025 at 1:11 AM, Rácz Dániel / FA : BTW May 24, 2025 at 1:12 AM, Böröcz Tamás : Track 7036 E0CNVA52_M09 May 24, 2025 at 1:13 AM, Böröcz Tamás : De megoldottam nem kell túl pörögni May 24, 2025 at 1:13 AM, Böröcz Tamás : Most kivételesen jól írták be May 24, 2025 at 1:15 AM, Rácz Dániel / FA : Nah ugye May 24, 2025 at 1:29 AM, Szücs Géza FT-B : ahha, igaz A52 az igen az lehet STKA52 és CNVA52 is May 24, 2025 at 1:41 AM, 김지수PM(Gyuri)_FA : @FA please check E0STKC52_C02 (over size error) thanks May 24, 2025 at 1:42 AM, Csanálosi Gábor FA : In progress, @Böröcz Tamás on his way , but we have to go around the building May 24, 2025 at 1:43 AM, 김지수PM(Gyuri)_FA : Take your time! Thanks in advance May 24, 2025 at 1:43 AM, Csanálosi Gábor FA : And its c01 May 24, 2025 at 1:48 AM, 김지수PM(Gyuri)_FA : Sorry, problem is C01 not C02 thanks! May 24, 2025 at 1:58 AM, Csanálosi Gábor FA : Solved May 24, 2025 at 2:23 AM, Debreczeni Ármin : Agv #2 stopped line 4 st May 24, 2025 at 3:08 AM, 김현태 : NC AN AGV #2 error. Thanks May 24, 2025 at 3:49 AM, 김현태 : NC AN AGV #2 error. Thanks May 24, 2025 at 4:04 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 04 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 206 • Cathode: 190 GF NC reel Available lot 4/5 line • AN: 104 • CA: 368 May 24, 2025 at 4:25 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA The empty reel carrier does not start back up on port M01. May 24, 2025 at 4:30 AM, Csanálosi Gábor FA : Megyünk May 24, 2025 at 4:34 AM, Kovács Ágnes : Solved May 24, 2025 at 4:45 AM, VK (mcs) : @FA Please check Cathode Reel STK C52 Load oversize error! May 24, 2025 at 4:46 AM, Csanálosi Gábor FA : Yup, we noticed and on our way May 24, 2025 at 5:02 AM, Csanálosi Gábor FA : Done May 24, 2025 at 5:50 AM, 이민재 : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM Samkoo 이민재 최기수 May 24, 2025 at 6:46 AM, duzzaman Md (MCS) : @Fa Please check E0CNVC52_09_0008, Data loss error Thank you May 24, 2025 at 7:07 AM, 이민재 : Done May 24, 2025 at 7:29 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 185 • Cathode: 174 GF NC reel Available lot 4/5 line • AN: 127 • CA: 336 May 24, 2025 at 7:30 AM, Andrea Zentay : @MCS @FA Good morning, We need help. NC CA side: empty magazines not arrived in the mashines. This is how our production stops... May 24, 2025 at 7:37 AM, duzzaman Md (MCS) : Good morning. There's no available material May 24, 2025 at 7:46 AM, Andrea Zentay : Thank you for the information. May 24, 2025 at 7:57 AM, Barta Rudi : @FA Vd Ca AGV 3 stop, please check, thank you May 24, 2025 at 8:15 AM, duzzaman Md (MCS) : @FA Please check C1STKC71, Crane 1 & 2 Light curtain detect error Thank you May 24, 2025 at 8:51 AM, duzzaman Md (MCS) : @Manufacturing Please check Circular conveyor C1CNV072 please check port M01 1+2 carriers are waiting. May 24, 2025 at 9:25 AM, 김주연 : @FA Plz check C1CNV071~C1STKC71_P21 Conveyor. There was a data mosmatch error and still not moving May 24, 2025 at 9:26 AM, duzzaman Md (MCS) : @Fa Please check E0CNVC52_09_008, Data loss error Thank you May 24, 2025 at 9:31 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check May 24, 2025 at 9:33 AM, Mr.Miti (미티) FA : we are working on it May 24, 2025 at 9:38 AM, 김주연 : @mcs Plz check MLC4125 IS not transferring. C1STKC71_P02 IS INSERVICE May 24, 2025 at 9:39 AM, KIM SEYEON [김세연]_FA : 👍 May 24, 2025 at 9:48 AM, duzzaman Md (MCS) : Everything was okay from MCS. However, they are repairing the STK again. Increased the priority. Will update you as soon as ut starts to move. May 24, 2025 at 9:50 AM, duzzaman Md (MCS) : Job is completed. May 24, 2025 at 9:53 AM, 이한웅(삼구) : @이주봉PM LEE JUBONG(FA) GF NC An 2-1 아웃포트 컨베이어 벨트 이탈 2회째 입니다. 확인 부탁드립니다 May 24, 2025 at 9:54 AM, Mr.Miti (미티) FA : The C02 stood still without an error message, but it didn't move even though it had a task. May 24, 2025 at 10:07 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 20 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 175 • Cathode: 183 GF NC reel Available lot 4/5 line • AN: 132 • CA: 344 May 24, 2025 at 10:34 AM, Barta Rudi : @FA @MCS Please check C1STKC71, It stopped. Thank you May 24, 2025 at 11:27 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 26 • Cathode: 22 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 162 • Cathode: 191 GF NC reel Available lot 4/5 line • AN: 133 • CA: 339 May 24, 2025 at 12:27 PM, duzzaman Md (MCS) : @FA Please check E0CNVA52_07_009 Data missmatch error. Thanks! May 24, 2025 at 12:56 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 25 • Cathode: 14 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 159 • Cathode: 182 GF NC reel Available lot 4/5 line • AN: 142 • CA: 347 May 24, 2025 at 1:15 PM, Barta Rudi : @duzzaman Md (MCS) Hello. The magazines are arriving very slowly to the cathode machines. Could you please check what the issue is? There are magazines available both in the warehouse and at the ports. May 24, 2025 at 1:27 PM, duzzaman Md (MCS) : If you are talking about NC CA, I see there are active jobs and no issues from MCS side. All the jobs have been created within last 11 mins May 24, 2025 at 1:30 PM, duzzaman Md (MCS) : There are active LR's. To add more, 9 AGVs are working on this side. And all are busy. May 24, 2025 at 2:45 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 05 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 173 • Cathode: 160 GF NC reel Available lot 4/5 line • AN: 138 • CA: 351 May 24, 2025 at 3:16 PM, duzzaman Md (MCS) : @FA @Mr.Miti (미티) FA E0stkC51/52, both are OOS, Port power off. Is some Maintainance ongoing ? May 24, 2025 at 3:17 PM, duzzaman Md (MCS) : Also E0STKA51_M10 LIGHT CURTAIN ERROR May 24, 2025 at 3:18 PM, Mr.Miti (미티) FA : Yes someone working on it May 24, 2025 at 3:21 PM, Imre : Operatorok folyamatosan reelt kérnek ki átnézik és visszaküldik a raktárba. May 24, 2025 at 3:41 PM, 김주연 : @FA Stacking 4,5,6 line agv#8 error. Plz check. Other agvs are blocked by this one May 24, 2025 at 3:53 PM, duzzaman Md (MCS) : @FA E0STKC71_C01 Fork #1 original fail error Thank you May 24, 2025 at 4:06 PM, 이민재 : Done May 24, 2025 at 4:18 PM, Barta Rudi : @FA @MCS C1CNVC71 Data Miss Match Error May 24, 2025 at 4:43 PM, Barta Rudi : @Fa NC Ca 4/2 AGV stop, please check, thank you May 24, 2025 at 4:50 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 06 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 165 • Cathode: 179 GF NC reel Available lot 4/5 line • AN: 141 • CA: 348 May 24, 2025 at 5:45 PM, Ynja/ivancsa FA : C1STKA71’s crane error pls check it May 24, 2025 at 6:00 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.23á4. "B" műszak, 12+2/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(0): Shift Change(0): Translater: -- --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(2): 방혁_이반차 (Bang Hyuk May 24, 2025 at 6:12 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 Light curtain detected May 24, 2025 at 6:13 PM, Csanálosi Gábor FA : Coming May 24, 2025 at 6:14 PM, 방혁 PM(Bang.Hyuk) FA : Hello gabor C1STKA71??? @Csanálosi Gábor FA May 24, 2025 at 6:14 PM, M.Ferenc "B"Nc/Vd SL : @FA Hello! RTV problem. It does not feed the reels out and the empty carriers are also on CV. Please check. May 24, 2025 at 6:15 PM, Csanálosi Gábor FA : On my way there May 24, 2025 at 6:15 PM, VK (mcs) : @FA Please check Cathode reel STKC51 port 1(9043) Input H/S off. May 24, 2025 at 6:18 PM, Csanálosi Gábor FA : An, ca? May 24, 2025 at 6:18 PM, M.Ferenc "B"Nc/Vd SL : Bocsi! CA May 24, 2025 at 6:18 PM, Csanálosi Gábor FA : Mindjárt, pill és nézem May 24, 2025 at 6:21 PM, Csanálosi Gábor FA : Done May 24, 2025 at 6:32 PM, VK (mcs) : @FA Please check Anode reel Conveyor A52 (7052) LTA0359 is not moving. May 24, 2025 at 6:34 PM, Csanálosi Gábor FA : Checking May 24, 2025 at 6:39 PM, Csanálosi Gábor FA : This message was deleted. May 24, 2025 at 6:47 PM, Kovács Ágnes : Solved May 24, 2025 at 7:07 PM, VK (mcs) : @FA Can you please check it. Problem still not solved. Thx May 24, 2025 at 7:08 PM, Csanálosi Gábor FA : Still working on it beside other errors. :) May 24, 2025 at 7:08 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA gabor can you check AN NC RTV?? May 24, 2025 at 7:09 PM, Csanálosi Gábor FA : Still on ca 51 hs off error May 24, 2025 at 7:17 PM, 방혁 PM(Bang.Hyuk) FA : 7052track data missmatch Error occurred May 24, 2025 at 7:20 PM, 김지수PM(Gyuri)_FA : @FA please check E0STKA51 May 24, 2025 at 7:20 PM, Szücs Géza FT-B : C01 or C02? May 24, 2025 at 7:21 PM, Csanálosi Gábor FA : The turn table not working. May 24, 2025 at 7:22 PM, 김지수PM(Gyuri)_FA : The light curtain of the port was detected when the fork was extended(C02) May 24, 2025 at 7:23 PM, Szücs Géza FT-B : C02 is outside, i go May 24, 2025 at 7:27 PM, 방혁 PM(Bang.Hyuk) FA : OMW May 24, 2025 at 7:27 PM, 방혁 PM(Bang.Hyuk) FA : Doesn't it work with manuals? May 24, 2025 at 7:28 PM, Csanálosi Gábor FA : Nope. May 24, 2025 at 7:30 PM, Szücs Géza FT-B : STKA51 C01 vissza kellene kapcsolni May 24, 2025 at 7:31 PM, 김지수PM(Gyuri)_FA : I'm going May 24, 2025 at 7:32 PM, Szücs Géza FT-B : crane need mc power on with the remote controll May 24, 2025 at 7:33 PM, 김지수PM(Gyuri)_FA : There is no remote controller? May 24, 2025 at 7:36 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 01 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 154 • Cathode: 184 GF NC reel Available lot 4/5 line • AN: — • CA: 334 May 24, 2025 at 7:36 PM, Szücs Géza FT-B : in inverter box? May 24, 2025 at 7:40 PM, 이도형 (Lee) : @FA NC An #3 Robot ERROR. Please check. May 24, 2025 at 7:40 PM, 방혁 PM(Bang.Hyuk) FA : @이도형 (Lee) NC AN 릴 공급 멈췃습니다. 현장에 릴 얼마나 남아있는지 확인 가능할까요?? May 24, 2025 at 7:42 PM, 이도형 (Lee) : 대차에 20릴 있습니다 May 24, 2025 at 7:42 PM, 방혁 PM(Bang.Hyuk) FA : 감사합니다 May 24, 2025 at 7:46 PM, 이도형 (Lee) : 완료 May 24, 2025 at 7:48 PM, Lan Nhi : @FA Hello. Please check for me, agv #10 error on machine 4-1 An. Thanks May 24, 2025 at 7:49 PM, 이도형 (Lee) : Stopped twice in a row May 24, 2025 at 7:53 PM, Denkó Jani (F.A.) : Solved May 24, 2025 at 7:54 PM, Truong : @FA NC CA agv#2 error please come check Thank May 24, 2025 at 7:57 PM, Truong : Sankoo fixed May 24, 2025 at 8:03 PM, 방혁 PM(Bang.Hyuk) FA : 릴 공급 다시 시작했습니다 May 24, 2025 at 8:07 PM, 이도형 (Lee) : 감사합니다. May 24, 2025 at 8:24 PM, M.Ferenc "B"Nc/Vd SL : @Csanálosi Gábor FA El tudsz jönni Ca 2-2 felé? May 24, 2025 at 8:25 PM, Csanálosi Gábor FA : Szüneten vagyok, a srácok szerintem még az an 51 konveyort masszírozzák May 24, 2025 at 8:26 PM, M.Ferenc "B"Nc/Vd SL : Rendi May 24, 2025 at 8:30 PM, Lan Nhi : @RTV please check for me. GF/AN these machines have not been loaded with empty magazines for a long time 4/2: 19:16 - 4/3: 19:19 - 2/2: 20:03 - 6/3: 20:12- 6/1: 19:40- May 24, 2025 at 8:30 PM, M.Ferenc "B"Nc/Vd SL : Van itt egy leesett sensor, amit szerintünk hozzátok tartozik, csak nem tudni honnan jött. Hátha kell majd. May 24, 2025 at 8:31 PM, Szücs Géza FT-B : merre? May 24, 2025 at 8:34 PM, M.Ferenc "B"Nc/Vd SL : Be volt esve a 2/2 gépünk alá, de nem oda való. Fennakadást nem okozott. May 24, 2025 at 8:37 PM, Böröcz Tamás : Valószínűleg kivitelezés közben került oda May 24, 2025 at 8:37 PM, Böröcz Tamás : Csak volt másik May 24, 2025 at 8:38 PM, Dariimaa/다리마/Ivancsa : @FA tech VD AN C1STKA71 crane error. Please check May 24, 2025 at 8:38 PM, VK (mcs) : AGVs are busy. 4/2 6/3 2/2 Job assigned and waiting for AGV. May 24, 2025 at 8:41 PM, VK (mcs) : @FA Please check Anode reel STK A51 port 2(7049) LTA0425 is not moving. Destination is CNVA52 buffer port 10. May 24, 2025 at 8:42 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA this H/S is not working now Please make a H/S ready May 24, 2025 at 8:43 PM, 김지수PM(Gyuri)_FA : @FA could you please check track 9043(E0STKC53) Home stand sensor isn't detected, seems like have to move up and down May 24, 2025 at 8:43 PM, Csanálosi Gábor FA : Atm iam at modul wh May 24, 2025 at 8:44 PM, Lan Nhi : Thanks May 24, 2025 at 8:44 PM, 방혁 PM(Bang.Hyuk) FA : Geza? May 24, 2025 at 8:45 PM, 김지수PM(Gyuri)_FA : 7049 track(E0STKA51) has also same problem May 24, 2025 at 8:47 PM, Szücs Géza FT-B : CNVC52 RTV working again May 24, 2025 at 8:47 PM, VK (mcs) : @FA Please check Anode reel STK A52 C02 MCP AP error. May 24, 2025 at 8:48 PM, Szücs Géza FT-B : Electrode GF group, Foil STK door need sphareparth May 24, 2025 at 8:48 PM, Szücs Géza FT-B : we going to check CNVA52 RTV May 24, 2025 at 9:02 PM, Dariimaa/다리마/Ivancsa : @MCS ST CA C1CNV072_P04 MLA6175 has not moved for a long time. Please check Thank you! May 24, 2025 at 9:03 PM, VK (mcs) : Please confirm carrier ID. Is it MLA6175? May 24, 2025 at 9:13 PM, VK (mcs) : Fixed and job assigned. May 24, 2025 at 9:17 PM, Szücs Géza FT-B : @Böröcz Tamás repaired AN RTV May 24, 2025 at 9:17 PM, Truong : NC CA RTV C1STKC71 -P11-MCP error please come check May 24, 2025 at 9:17 PM, Truong : @FA May 24, 2025 at 9:17 PM, Szücs Géza FT-B : -RTV May 24, 2025 at 9:18 PM, Truong : Yes May 24, 2025 at 9:20 PM, Debreczeni Ármin : Agv's are very rarely coming to L6. Is there any problem? May 24, 2025 at 9:22 PM, 정은탁 (Jung EunTak) : NC An' 공매거진 공급지연으로 인한 설비 비가동 발생 2-1 2-2 19:25~19:45 20분 20:03~20:55 52분 2-3 18:38~18:56 18분 19:51~20:14 23분 20:38~20:57 19분 4-1 19:04~19:23 19분 20:34~21:16 42분 4-2 19:16~20:23 67분 20:57~ 4-3 19:19~20:44 85분 21:06~ 5-1 18:33~18:57 24분 20:45~21:15 30분 5-2 19:09~19:24 15분 5-3 20:14~20:44 30분 21:10~ 6-1 19:40~20:17 37분 6-2 19:20~19:53 33분 20:39~20:58 19분 6-3 19:32~19:50 18분 20:21~20:51 30분 May 24, 2025 at 9:25 PM, VK (mcs) : @manufacturing There is transfer Job to Anode notching 3/2 port 3 but port is out of service. Please check it May 24, 2025 at 9:29 PM, VK (mcs) : Materials are available in the Gantry. But all AGVs are busy. May 24, 2025 at 9:31 PM, Truong : NC CA AGV #2 error please come check Thank May 24, 2025 at 10:05 PM, 이도형 (Lee) : VD C1STCKA71 error please come check May 24, 2025 at 10:13 PM, Csanálosi Gábor FA : Solved May 24, 2025 at 10:16 PM, Debreczeni Ármin : Agv #4 stopped, there is a traffic jam May 24, 2025 at 10:17 PM, Csanálosi Gábor FA : An? May 24, 2025 at 10:19 PM, Debreczeni Ármin : Front of stacking Ca side. An side #4 May 24, 2025 at 10:19 PM, Debreczeni Ármin : Agv #2 line2 stopped May 24, 2025 at 10:22 PM, VK (mcs) : @FA Please check Anode reel STK A52 C01 Load oversize error. May 24, 2025 at 10:23 PM, Debreczeni Ármin : That one is important lot of agv waiting for free road May 24, 2025 at 10:23 PM, Csanálosi Gábor FA : Omw May 24, 2025 at 10:27 PM, 이도형 (Lee) : @FA NC CA #10 AGV ERROR. Please check. May 24, 2025 at 10:29 PM, Csanálosi Gábor FA : Done May 24, 2025 at 10:30 PM, 이도형 (Lee) : @FA NC CA #2 AGV ERROR. Please check. May 24, 2025 at 10:38 PM, Dariimaa/다리마/Ivancsa : Solved May 24, 2025 at 10:38 PM, Dariimaa/다리마/Ivancsa : Solved May 24, 2025 at 10:50 PM, Betti B SL : L6 ST does not come with AGV, is there any problem? May 24, 2025 at 10:55 PM, Debreczeni Ármin : @VK (mcs) please send CA stack materials to c1stkc72 m01 port. Need amount : 10 plate please send AN stack materials to c1stka72 m01 port Need amount : 10 plate @Yosyp Tovt @Kristina May 24, 2025 at 10:55 PM, 이도형 (Lee) : @FA NC CA #2 AGV ERROR. Please check. May 24, 2025 at 11:12 PM, VK (mcs) : Material released. May 24, 2025 at 11:25 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 60 • Cathode: 02 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 135 • Cathode: 176 GF NC reel Available lot 4/5 line • AN: 174 • CA: 344 May 25, 2025 at 12:03 AM May 25, 2025 at 12:03 AM, Dariimaa/다리마/Ivancsa : @MCS VD CA 5-3 chamber P03 P04 is empty. Please delete the job. Thank you! May 25, 2025 at 12:04 AM, VK (mcs) : Checking May 25, 2025 at 12:06 AM, VK (mcs) : Do you know what's the reason? Did AGV transfer them with an error? May 25, 2025 at 12:08 AM, Dariimaa/다리마/Ivancsa : Yes. AGV#9 was taken incorrectly. May 25, 2025 at 12:09 AM, VK (mcs) : Thanks for confirmation May 25, 2025 at 12:10 AM, VK (mcs) : MCS and RTD cleared. May 25, 2025 at 12:21 AM, M.Ferenc "B"Nc/Vd SL : @FA VD CA The AGV did not remove the upper left plate from chamber #39(5-3). (MLC4064). Please check. May 25, 2025 at 12:25 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA AGV#5 stopped near 2-3 machine. May 25, 2025 at 12:28 AM, Csanálosi Gábor FA : Kész May 25, 2025 at 12:31 AM, Betti B SL : On the inside of L6 ST, at the AGV Station in front of machine #1, we cannot call an AGV, the indicator light is not working May 25, 2025 at 12:37 AM, Dariimaa/다리마/Ivancsa : Solved May 25, 2025 at 2:10 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 64 • Cathode: 05 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 132 • Cathode: 175 GF NC reel Available lot 4/5 line • AN: 222 • CA: 350 May 25, 2025 at 2:58 AM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa could you check gf stack conveyor errors? May 25, 2025 at 3:35 AM, 방혁 PM(Bang.Hyuk) FA : 03:04 해소되었습니다 May 25, 2025 at 3:43 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16256) MLC1202 is not moving. May 25, 2025 at 3:43 AM, 방혁 PM(Bang.Hyuk) FA : @Dariimaa/다리마/Ivancsa can you check it?? May 25, 2025 at 3:45 AM, Dariimaa/다리마/Ivancsa : Solved May 25, 2025 at 4:55 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 53 • Cathode: 04 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 148 • Cathode: 181 GF NC reel Available lot 4/5 line • AN: 245 • CA: 350 May 25, 2025 at 5:58 AM, 이민재 : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) LEE JUBONG 이주봉PM JI SEOKBEOM 지석범PM Samkoo 이민재 최기수 May 25, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) Technician, 1 Sl, 1 Overtime 2 Sick ———————————— Electrode (1): Cehmann Zsolt ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— May 25, 2025 at 6:24 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 142 • Cathode: 178 GF NC reel Available lot 4/5 line • AN: 254 • CA: 356 Thank you very much! May 25, 2025 at 6:28 AM, Barta Rudi : @FA @MCS C0PVC030_P04 Plate Sensor Error May 25, 2025 at 6:58 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVA52_07_052 there is INV-02 Runtime Over error and it is blocking Anode reels delivery to line 2 &6. Thank you for your! May 25, 2025 at 7:00 AM, Nguyên : NC AN GF AGV#10 Error May 25, 2025 at 7:01 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA51_C01 there is Ready off during Forking error and it has distributed the Materials supply. Thank you very much! May 25, 2025 at 7:42 AM, Andrea Zentay : @MCS @FA We need help. NC CA ROBOT #3 not working. There is material. No error message. Thank you. May 25, 2025 at 7:43 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please support this problem. May 25, 2025 at 7:45 AM, Mohammad Amir : @FA Please check 8025(C0PVC030_P06) it is in Manual mode hence OOS. Thank you! May 25, 2025 at 7:45 AM, 이민재 : Done May 25, 2025 at 8:06 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 45 • Cathode: 01 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 123 • Cathode: 157 GF NC reel Available lot 4/5 line • AN: 241 • CA: 355 Thank you very much! May 25, 2025 at 8:34 AM, Mohammad Amir : @FA Please check E0CNVA52(7048) ,Carrier LTA1298 is not moving and blocking reels delivery. Thank you very much! May 25, 2025 at 8:42 AM, 이민재 : Done May 25, 2025 at 8:42 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 9:02 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Run Time over error and it is blocking reels delivery. Thank you very much! May 25, 2025 at 9:20 AM, Nguyên : please check for me. empty trays are being delivered to machines on line 4 very slowly May 25, 2025 at 9:20 AM, Mohammad Amir : Please tell me the Area and Polarity? Thank you! May 25, 2025 at 9:21 AM, Nguyên : Sory NC AN GF May 25, 2025 at 9:21 AM, Mohammad Amir : Checking May 25, 2025 at 9:25 AM, Mohammad Amir : AGV#9 on the way to 4-2 and AGV#10 on the way to 2-2. And empty magazine also on the way to 2-1. For other Machines , We have LR and as soon as magazine are coming to O/P ports ,empty magazine are getting transferred to NC AN machines. I am monitoring. Thank you very much! May 25, 2025 at 9:36 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 41 • Cathode: 04 Pre STK > VD • Anode: 04 • Cathode: 00 Post STK > Stacking • Anode: 103 • Cathode: 163 GF NC reel Available lot 4/5 line • AN: 248 • CA: 365 Thank you very much! May 25, 2025 at 9:45 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Run Time over error and it is blocking reels delivery. Thank you very much! May 25, 2025 at 10:33 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Run Time over error and it is blocking reels delivery. Thank you very much! May 25, 2025 at 10:36 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 00 Pre STK > VD • Anode: 14 • Cathode: 00 Post STK > Stacking • Anode: 87 • Cathode: 147 GF NC reel Available lot 4/5 line • AN: 255 • CA: 359 Thank you very much! May 25, 2025 at 10:55 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV072_16_103 there is INV-01 Run Time over error and at 16_101 there is Data Mismatch error and it is blocking stacking materials delivery. Thank you very much! May 25, 2025 at 10:56 AM, Ynja/ivancsa FA : On my way! May 25, 2025 at 11:01 AM, Ynja/ivancsa FA : solved May 25, 2025 at 11:01 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 11:01 AM, Nguyên : NC AN GF AGV#8-4-2-7 Error May 25, 2025 at 11:15 AM, Mohammad Amir : @Ynja/ivancsa FA Please check NC AN AGV#8 it is blocking AGV#3 and because of this issue Empty magazine transfer for NC AN 4-3 is being delayed. Thank you! May 25, 2025 at 11:17 AM, Ynja/ivancsa FA : It’s working fine now May 25, 2025 at 11:17 AM, Mohammad Amir : Thank you very much! May 25, 2025 at 12:03 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 111 • Cathode: 154 GF NC reel Available lot 4/5 line • AN: 257 • CA: 360 Thank you very much! May 25, 2025 at 12:09 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check C1CNV072_16_146 there is INV-01 Run Time over error and at 16_144 there is Data Mismatch error and it is blocking CA stacking materials delivery. Thank you very much! May 25, 2025 at 12:29 PM, Nguyên : NC AN GF AGV#10 Error May 25, 2025 at 12:31 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check E0CNVC52_RTV01 there is Run Time over error and it is blocking reels delivery. Thank you very much! May 25, 2025 at 12:50 PM, Nguyên : VD AN GF AGV#8 Error May 25, 2025 at 12:54 PM, Ynja/ivancsa FA : solved without RTV May 25, 2025 at 12:54 PM, Mohammad Amir : Thank you very much! May 25, 2025 at 12:56 PM, Mohammad Amir : Could you please check again ,E0CNVC52_BP02 there is Data Mismatch error. Thank you! May 25, 2025 at 12:59 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 4-1 (P01/02) there is half chamber situation. Thank you very much! May 25, 2025 at 12:59 PM, Nguyên : NC AN GF AGV#3 Error May 25, 2025 at 1:04 PM, Ynja/ivancsa FA : 🇭🇺 team is working on it May 25, 2025 at 1:22 PM, Hồng Anh SL NC&VD 1F : Pls manual request AGV come to chamber 14(2-5) AN VD for unload all plate inside pls. Chamber finish. We will check issue later. Now all tc busy. May 25, 2025 at 1:30 PM, Mohammad Amir : This message was deleted. May 25, 2025 at 1:30 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check NC CA AGV#2 there is Fork1 SW limit + error and this AGV is blocking other AGVs and delaying empty magazine tranfer. Thank you! May 25, 2025 at 1:33 PM, Mohammad Amir : Because of this issue empty magazine transfer to line NC CA 5-2,5-1 is being delayed. Thank you! May 25, 2025 at 1:34 PM, Ynja/ivancsa FA : @Nandia FA May 25, 2025 at 1:40 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 104 • Cathode: 142 GF NC reel Available lot 4/5 line • AN: 263 • CA: 365 Thank you very much! May 25, 2025 at 1:46 PM, 이민재 : @MCS Please check what is created by the GF C1STKA72 6013 port. May 25, 2025 at 1:46 PM, Mohammad Amir : Checking Sir. May 25, 2025 at 1:47 PM, Mohammad Amir : @FA Please check C1STKC72_C01 there is Load Oversize error. Thank you! May 25, 2025 at 1:47 PM, Mohammad Amir : C02** May 25, 2025 at 1:50 PM, Mohammad Amir : Currently there are two jobs with destination C1STKA72_6013 ,this jobs are in queue cause currently there is a carrier MLA6187 located at 6013. Please let me know if you need any further information. Thank you very much! May 25, 2025 at 1:57 PM, Novák Károly F. A. : Solved May 25, 2025 at 1:57 PM, Mohammad Amir : Thank you very much! May 25, 2025 at 2:19 PM, Mohammad Amir : @FA @Nandia FA Please check C1CNV072_16_156 there is Data Mismatch error and it is blocking stacking materials delivery. Thank you very much! May 25, 2025 at 3:52 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 61 • Cathode: 05 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 97 • Cathode: 140 GF NC reel Available lot 4/5 line • AN: 252 • CA: 372 Thank you very much! May 25, 2025 at 4:27 PM, Nguyên : NC AN GF AGV#10 Error May 25, 2025 at 4:31 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKA51_C01 there is Area Sensor Detected Error. Thank you! May 25, 2025 at 4:42 PM, Novák Károly F. A. : Checking May 25, 2025 at 5:16 PM, 김태헌 : ST 5L #14 AGV stacking interlock alarm please check May 25, 2025 at 5:21 PM, Novák Károly F. A. : Done May 25, 2025 at 5:21 PM, Mohammad Amir : Thank you very much! May 25, 2025 at 5:41 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 60 • Cathode: 07 Pre STK > VD • Anode: 05 • Cathode: 01 Post STK > Stacking • Anode: 93 • Cathode: 143 GF NC reel Available lot 4/5 line • AN: 294 • CA: 350 Thank you very much! May 25, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.25. "B" műszak, 12+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(0): Sick(0): Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (4): Kovács Ágnes, Csanálosi Gábor , Böröcz Tamás, Denkó János --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Boromisza Zoltán, Gerbovits Kevin, Harasztia Z May 25, 2025 at 6:21 PM, QuangPhan : Hello! Good evening! @MCS Please check the empty magazine supply on the NC AN 6/2 mgz is almost empty. Thank you so much! May 25, 2025 at 6:24 PM, Shakir (MCS) : AGV03 on the way to line 6/2 with empty magazine. Thank you May 25, 2025 at 6:27 PM, Shakir (MCS) : @FA Please check C1STKA72, C01/02 Light curtain detect error. Thank you May 25, 2025 at 6:45 PM, QuangPhan : Hello! @MCS Please check NC AN E0CNVA5_M07 (LTA0909) and E0CNVA5_M09 (LTA0261). Tray place empty cannot return to warehouse. Thank you so much. May 25, 2025 at 6:54 PM, Shakir (MCS) : This message was deleted. May 25, 2025 at 7:02 PM, Shakir (MCS) : Please try RankIn again for both carrier Thank you May 25, 2025 at 7:07 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 48 • Cathode: 06 Pre STK > VD • Anode: 10 • Cathode: 01 Post STK > Stacking • Anode: 87 • Cathode: 142 GF NC reel Available lot 4/5 line • AN: 301 • CA: 364 Thank you very much! May 25, 2025 at 7:07 PM, M.Ferenc "B"Nc/Vd SL : @FA NC CA 6-3 Magazine loader is not working. We cannot restart it. May 25, 2025 at 7:11 PM, 김지수PM(Gyuri)_FA invited 김종원. May 25, 2025 at 7:13 PM, 김지수PM(Gyuri)_FA : @김종원 음극 후창고가 30분가량 죽어서, 음극 순환물류쪽 캐리어가 많습니다. 에러뜨면 바로 조치하실 수 있도록 모니터링 부탁드리겠습니다. May 25, 2025 at 7:25 PM, 방혁 PM(Bang.Hyuk) FA : @제조 C1STKA72 (GF음극 후창고) 17시06분~ 19시 12분까지 애러 지속발생하며 스택4,5,6L 물동량 밀리고 있습니다. 화물 수동 공급 필요하신가요? May 25, 2025 at 7:29 PM, Noémi (소미) : @termelés C1STKA72 (GF anód VD utáni raktár) 17:06-tól 19:12-ig folyamatosan error keletkezett, ezért a stack 4,5,6L anyag szállitása feltorlódott. Szükség van esetleg kézi anyag ellátásra? May 25, 2025 at 7:30 PM, 김지수PM(Gyuri)_FA : @김종원 순환물류 멈췄는데, 16169 16171 트랙에있는 캐리어 두개 그냥 손으로 빼주시면 감사하겠습니다. 데이터는 제가 지우겠습니다. May 25, 2025 at 7:31 PM, Shakir (MCS) : @FA Please check MLA4249 at C1CNV072_16_169 is not moving. Thank you May 25, 2025 at 7:31 PM, 김지수PM(Gyuri)_FA : 16169 > MLA4249 16171 > MLA4228 May 25, 2025 at 7:32 PM, Debreczeni Ármin : Megnézzük May 25, 2025 at 7:33 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA Can you check C1STKA72? May 25, 2025 at 7:34 PM, Noémi (소미) : @방혁 PM(Bang.Hyuk) FA 확인해보겠습니다. May 25, 2025 at 7:34 PM, 조범희 : 네 SSL 확인 후 요청 할것같습니다 May 25, 2025 at 7:34 PM, 김종원 : 다뺐습니다. May 25, 2025 at 7:35 PM, Debreczeni Ármin : @Shakir (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : 20 plate please send AN stack materials to c1stka72 m01 port Need amount : 30 plate May 25, 2025 at 7:35 PM, Shakir (MCS) : @FA Please check C1STKA72_C01 there is Ready off during Forking error Thank you May 25, 2025 at 7:35 PM, Debreczeni Ármin : @Kristina @Betti B SL @Valentyn @Vladyslav Kucher @Mykhailo @Yosyp Tovt May 25, 2025 at 7:36 PM, Truong : NC Ca. E0STKC51-RTV-MCP error please come check May 25, 2025 at 7:36 PM, Debreczeni Ármin : Please share the requested quantity between lines May 25, 2025 at 7:36 PM, 김지수PM(Gyuri)_FA : @김종원 리셋 후, 스타트 부탁드리겠습니다. May 25, 2025 at 7:36 PM, Csanálosi Gábor FA : Kész May 25, 2025 at 7:37 PM, Csanálosi Gábor FA : Not now, kinda busy May 25, 2025 at 7:40 PM, Debreczeni Ármin : @Shakir (MCS) if the problem not been solve in the next 40 min please add +10 AN plate thank you May 25, 2025 at 7:40 PM, Shakir (MCS) : Working on it Thank you May 25, 2025 at 7:41 PM, Csanálosi Gábor FA : Going there May 25, 2025 at 7:44 PM, 김지수PM(Gyuri)_FA : @Zaya/ivancsa FA could you please check c1cnv072 (anode, 16136) May 25, 2025 at 8:01 PM, 김지수PM(Gyuri)_FA : @김종원 순환물류 정체 풀리기전까지 AGV가 공트레이 못넣게 좀 부탁드리겠습니다. 올 때 범퍼 밟으시면 됩니다. May 25, 2025 at 8:03 PM, 김지수PM(Gyuri)_FA : @김종원 16169 16171 화물 수동으로 빼주시면 감사하겠습니다. May 25, 2025 at 8:03 PM, 김지수PM(Gyuri)_FA : 메뉴얼전환 좀 먼저 부탁드립니다. 지금 갈게요 May 25, 2025 at 8:05 PM, QuangPhan : Helo! @FA NC AN 4/1 AGV #10 error. Thanks May 25, 2025 at 8:06 PM, Shakir (MCS) : CA 20 plates has been to C1STKC72_M01, working on AN Thank you May 25, 2025 at 8:14 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 there is Run Time over error. Thank you May 25, 2025 at 8:16 PM, QuangPhan : @FA Please check it. This AGV is hindering other AGVs working on line 4. Thank you so much!. May 25, 2025 at 8:16 PM, Shakir (MCS) : ****Released May 25, 2025 at 8:18 PM, KIM SEYEON [김세연]_FA : @Tuya Ivancsa FA please chec NC AN AGV10 May 25, 2025 at 8:20 PM, QuangPhan : Done. Thank you! May 25, 2025 at 8:20 PM, Shakir (MCS) : @FA Please check C1STKA72_C01, crane is not working. Thank you May 25, 2025 at 8:23 PM, Debreczeni Ármin : So we cant take out mgz manually am i right? May 25, 2025 at 8:24 PM, QuangPhan : Helo! @FA NC AN 4/1 AGV #7 error. Thanks May 25, 2025 at 8:25 PM, Shakir (MCS) : Yes, I already created job for 10 AN plate but there issue with STK. Thank you May 25, 2025 at 8:25 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B @Csanálosi Gábor FA could you check NC CA RTV runtime over ? May 25, 2025 at 8:31 PM, Debreczeni Ármin : I made an additional request May 25, 2025 at 8:31 PM, Debreczeni Ármin : @Shakir (MCS) please send CA stack materials to c1stkc72 m01 port. Need amount : 30 plate please send AN stack materials to c1stka72 m01 port Need amount : 20 plate May 25, 2025 at 8:32 PM, Debreczeni Ármin : @Shakir (MCS) so my total An : 50 Ca : 50 May 25, 2025 at 8:34 PM, Debreczeni Ármin : @M.Ferenc "B"Nc/Vd SL @QuangPhan Please send empty carts to VD we need take out lot of plates May 25, 2025 at 8:35 PM, Denkó Jani (F.A.) : Solved May 25, 2025 at 8:35 PM, M.Ferenc "B"Nc/Vd SL : Pár darab van katód VD-n és annyi. Notching folyosón nincs. May 25, 2025 at 8:36 PM, Böröcz Tamás : Solved May 25, 2025 at 8:36 PM, Truong : @FA NC CA AGV#2 error please come check May 25, 2025 at 8:43 PM, QuangPhan : I am sending empty carts to VD. please get it at are empty cart. Thank you so much! May 25, 2025 at 8:48 PM, Debreczeni Ármin : Thanks thanks May 25, 2025 at 8:48 PM, QuangPhan : Area VD AN May 25, 2025 at 8:57 PM, KIM SEYEON [김세연]_FA : @Denkó Jani (F.A.) @Böröcz Tamás as I see, NC CA rtv alarm isn't solved could you check it again? May 25, 2025 at 9:04 PM, Debreczeni Ármin : @Shakir (MCS) Can you tell me when anode request is coming? Crane is working at the moment but our lines in trouble May 25, 2025 at 9:07 PM, Csanálosi Gábor FA : Solved May 25, 2025 at 9:07 PM, Shakir (MCS) : Crane is busy now, I will increase priority for stacking materials. Thank you May 25, 2025 at 9:09 PM, Debreczeni Ármin : Okay thanks May 25, 2025 at 9:09 PM, Szücs Géza FT-B : There were a lot of errors with RTV during the day shift. May 25, 2025 at 9:15 PM, KIM SEYEON [김세연]_FA : what is the root cause? cs engineer will arrive soon. May 25, 2025 at 9:20 PM, Shakir (MCS) : This message was deleted. May 25, 2025 at 9:20 PM, Shakir (MCS) : @Debreczeni Ármin Please remove the carrier at M01 AN, carriers are waiting. Thank you May 25, 2025 at 9:27 PM, Shakir (MCS) : @FA Please check C1STKA72_C02 there is Ready off during Forking error Thank you May 25, 2025 at 9:28 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please support c1stka72 c02 16031 port tray ID loss May 25, 2025 at 9:28 PM, Szücs Géza FT-B : example AN RTV: Tray abnormal, data mismatch errors on M07 ports lift. and RTV data mismach and laser sensor error. CA RTV: RTV Run time over alarm, we have this error very often May 25, 2025 at 9:29 PM, Debreczeni Ármin : All of them coming out on that port? May 25, 2025 at 9:30 PM, Shakir (MCS) : C1STKA72_M01 May 25, 2025 at 9:30 PM, Szücs Géza FT-B : omw May 25, 2025 at 9:31 PM, Betti B SL : L6 ST AGV #5 stopped May 25, 2025 at 9:31 PM, Debreczeni Ármin : Agv #9 VD AN is topped May 25, 2025 at 9:31 PM, Debreczeni Ármin : *s May 25, 2025 at 9:48 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 19 Pre STK > VD • Anode: 17 • Cathode: 02 Post STK > Stacking • Anode: 91 • Cathode: 112 GF NC reel Available lot 4/5 line • AN: 321 • CA: 388 Thank you May 25, 2025 at 10:19 PM, Shakir (MCS) : @Debreczeni Ármin Total AN : 50 CA : 50 Plates stacking material has been released. Thank you May 25, 2025 at 10:20 PM, Debreczeni Ármin : Thank you so much! We gather all of them as soon as possible. May 25, 2025 at 10:28 PM, Shakir (MCS) : @FA Please check C1STKA71_P17/18 is OOS because of Dats mismatch error. Thank you! May 25, 2025 at 10:30 PM, Csanálosi Gábor FA : Solved, needs restart port May 25, 2025 at 10:33 PM, Truong : @FA NC Ca AGV#2 error please come check May 25, 2025 at 10:42 PM, Shakir (MCS) : @FA Please check C1STKA72_C02 there is Ready off during Forking error C1STKA72_P04 : Tray id loss Thank you May 25, 2025 at 10:46 PM, Shakir (MCS) : @FA Please check Anode Pre-STK A71 Light curtain detected Thank you May 25, 2025 at 10:50 PM, Truong : @FA Again error May 25, 2025 at 10:51 PM, Debreczeni Ármin : @Shakir (MCS) Sorry, can you reduce CA material manual release quantity? If yes reduce to 20 plate only please. Situation is not so bad what we see first May 25, 2025 at 10:51 PM, Shakir (MCS) : Checking May 25, 2025 at 10:54 PM, QuangPhan : Helo! @FA NC AN 5/3 AGV #4 error. Thanks May 25, 2025 at 11:03 PM, Shakir (MCS) : I have cancelled some jobs Thank you May 25, 2025 at 11:12 PM, Debreczeni Ármin : Thank you May 25, 2025 at 11:24 PM, 방혁 PM(Bang.Hyuk) FA : @MCS please check ST CA AGV6 C6STM180_P01 Already have a carrier May 25, 2025 at 11:28 PM, Shakir (MCS) : I have cancelled the job for AGV06 send it the STK. Thank you May 25, 2025 at 11:29 PM, 김지수PM(Gyuri)_FA : @fa please check E0STKA52 C01 Oversize error thanks! May 25, 2025 at 11:31 PM, 방혁 PM(Bang.Hyuk) FA : Pls check again this agv don't have a job from ACS May 25, 2025 at 11:33 PM, 방혁 PM(Bang.Hyuk) FA : I checked Thank you! May 25, 2025 at 11:33 PM, Shakir (MCS) : Job has been initiated now Thank you May 25, 2025 at 11:40 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 60 • Cathode: 12 Pre STK > VD • Anode: 26 • Cathode: 01 Post STK > Stacking • Anode: 53 • Cathode: 136 GF NC reel Available lot 4/5 line • AN: 320 • CA: 405 Thank you May 25, 2025 at 11:45 PM, Shakir (MCS) : @FA Please check C1CNV072_M03. Data mismatch error. Thank you May 25, 2025 at 11:47 PM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA May 25, 2025 at 11:48 PM, 김지수PM(Gyuri)_FA : Solved by someone May 26, 2025 at 12:12 AM May 26, 2025 at 12:12 AM, QuangPhan : Hello! @Shakir (MCS) Please check the empty magazine supply on the NC AN 4/3 mgz is almost empty. Thank you so much! May 26, 2025 at 12:13 AM, 방혁 PM(Bang.Hyuk) FA : @MCS Please delete the manual port command created in warehouse 72 May 26, 2025 at 12:13 AM, 방혁 PM(Bang.Hyuk) FA : AN,CA both side May 26, 2025 at 12:14 AM, Shakir (MCS) : AGV01 departed for 4/3 line with empty mgz Thank you May 26, 2025 at 12:21 AM, Shakir (MCS) : This message was deleted. May 26, 2025 at 12:21 AM, Shakir (MCS) : All the manual port command has been cancelled. Thank you May 26, 2025 at 12:28 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN ( E0CNVA52 ). We didn’t recieved material for a while. Thank you so much! May 26, 2025 at 12:31 AM, Shakir (MCS) : @FA Please check RTV A52 not moving, without error. Thank you May 26, 2025 at 12:31 AM, Shakir (MCS) : @Csanálosi Gábor FA May 26, 2025 at 12:31 AM, Csanálosi Gábor FA : Checking May 26, 2025 at 12:37 AM, Csanálosi Gábor FA : The rtv conveyor is full, thats why the rtv cannot unload the tray LTA1179, so waiting. May 26, 2025 at 12:41 AM, Csanálosi Gábor FA : The A51 were in silent error also, restarted, niw they are working, probably would clear rtv conveyor too May 26, 2025 at 12:43 AM, Shakir (MCS) : Also the carrier LTA1456 waiting at A51_P01 long time. May 26, 2025 at 12:44 AM, Csanálosi Gábor FA : Indeed, thats from rtv conveyor. May 26, 2025 at 12:49 AM, Csanálosi Gábor FA : I gave prio to it, now its gone, so the rtv could start moving again May 26, 2025 at 12:49 AM, Shakir (MCS) : Yes, correct it resolved the problem. Thank you May 26, 2025 at 12:50 AM, Csanálosi Gábor FA : I gave prio to 1470 also to give space to rtv May 26, 2025 at 12:51 AM, Shakir (MCS) : Now, RTV started to Move Thank you May 26, 2025 at 12:51 AM, Csanálosi Gábor FA : Your welcome May 26, 2025 at 12:54 AM, Shakir (MCS) : @FA Please check C1STKA_C01 - MCP AP error Thank you May 26, 2025 at 1:02 AM, 방혁 PM(Bang.Hyuk) FA : @MCS PLS check available lot for ST GF May 26, 2025 at 1:03 AM, Csanálosi Gábor FA : Done May 26, 2025 at 1:05 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 48 • Cathode: 00 Pre STK > VD • Anode: 17 • Cathode: 01 Post STK > Stacking • Anode: 67 • Cathode: 154 GF NC reel Available lot 4/5 line • AN: 334 • CA: 409 Thank you May 26, 2025 at 1:48 AM, M.Ferenc "B"Nc/Vd SL : Nc Ca 5/2-nél meg tudnátok nézni a magazin kiadó oldalt. May 26, 2025 at 1:53 AM, Csanálosi Gábor FA : @Böröcz Tamás May 26, 2025 at 1:54 AM, Rácz Dániel / FA : Jövünk May 26, 2025 at 2:49 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 00 Pre STK > VD • Anode: 26 • Cathode: 02 Post STK > Stacking • Anode: 92 • Cathode: 142 GF NC reel Available lot 4/5 line • AN: 346 • CA: 419 Thank you May 26, 2025 at 3:10 AM, 김지수PM(Gyuri)_FA : @fa please check vc05 in GF Anode NC, thanks May 26, 2025 at 3:12 AM, 정은탁 (Jung EunTak) : @FA NC Ca 6/1 AGV #4 Error. Please Check. May 26, 2025 at 3:25 AM, 방혁 PM(Bang.Hyuk) FA : @mcs Please check order status for C1CNV072 Cargo doesn't come from warehouse 72 May 26, 2025 at 3:29 AM, Shakir (MCS) : Both STK are working, There is less job in STK 72. Thank you May 26, 2025 at 3:30 AM, 방혁 PM(Bang.Hyuk) FA : As you know, there is no carrier in the circulating CV and the warehouse does not supply carriers May 26, 2025 at 3:32 AM, 방혁 PM(Bang.Hyuk) FA : I just switched to the manual and I will start the LR signal again with Auto May 26, 2025 at 3:32 AM, Shakir (MCS) : I’m checking LR for different port. May 26, 2025 at 3:35 AM, 김지수PM(Gyuri)_FA : @김종원 음극 순환물류cnv M04 에서 캐리어 빼주시면 감사하겠습니다. May 26, 2025 at 3:36 AM, 방혁 PM(Bang.Hyuk) FA : 6라인 자재공급 딜레이될수있습니다. 수동 명령 필요하시면 연락주세요! May 26, 2025 at 3:36 AM, Shakir (MCS) : LR received and All the output ports already has job. May 26, 2025 at 3:37 AM, 방혁 PM(Bang.Hyuk) FA : Why carrier is not coming? May 26, 2025 at 3:38 AM, Shakir (MCS) : Checking May 26, 2025 at 3:47 AM, 방혁 PM(Bang.Hyuk) FA : In MCS side GF ST CV PORT was blocked May 26, 2025 at 3:47 AM, 방혁 PM(Bang.Hyuk) FA : Can you see?? May 26, 2025 at 3:47 AM, 방혁 PM(Bang.Hyuk) FA : MCS STATUS: Transfer blocked May 26, 2025 at 3:49 AM, Shakir (MCS) : I cancelled the manual command out still in MCS job state is showing Canceling. May 26, 2025 at 3:50 AM, 방혁 PM(Bang.Hyuk) FA : Is it not complete? May 26, 2025 at 3:51 AM, Shakir (MCS) : Not yet in canceling state I am deleting again. May 26, 2025 at 4:01 AM, Shakir (MCS) : Now stacking materials coming STK to CNV. Thank you May 26, 2025 at 4:04 AM, 김지수PM(Gyuri)_FA : But in MCS, substate is still remaining as transfer blocked May 26, 2025 at 4:04 AM, Debreczeni Ármin : Line 6 magazine supply are lacking can you add a little bit more prio for the next 30 minutes @Shakir (MCS) May 26, 2025 at 4:05 AM, Shakir (MCS) : Please proved me port id May 26, 2025 at 4:05 AM, Shakir (MCS) : *Provide May 26, 2025 at 4:36 AM, Truong : @FA NC CA AGV#4 error please come check May 26, 2025 at 4:41 AM, QuangPhan : Hello! @FA NC AN ( E0CNVA52 ) error. Tray Data mismatch. Thanks May 26, 2025 at 4:57 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please check why c1cnv072 p8 and p12 has no material? May 26, 2025 at 4:58 AM, Shakir (MCS) : Now job has been initiated for both the port. Carrier on the way Thank you May 26, 2025 at 5:02 AM, 방혁 PM(Bang.Hyuk) FA : 조치되었습니다 May 26, 2025 at 5:07 AM, KIM SEYEON [김세연]_FA : @Shakir (MCS) why mcl3200 material was gone to c1cnv072 m04? May 26, 2025 at 5:10 AM, Shakir (MCS) : Checking sir May 26, 2025 at 5:13 AM, Shakir (MCS) : It gone to C1CNVC072_M04 because there is magazine already finished ST: MC4091. Thank you May 26, 2025 at 5:22 AM, Truong : NC CA Agv #4 error please come check @FA May 26, 2025 at 5:22 AM, QuangPhan : Helo! @FA NC AN AGV #3 error. Thanks May 26, 2025 at 5:26 AM, 이도형 (Lee) : NC An Agv #3 error please come check @FA May 26, 2025 at 5:26 AM, Debreczeni Ármin : @Shakir (MCS) Please share lot quantity May 26, 2025 at 5:28 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 00 Pre STK > VD • Anode: 22 • Cathode: 02 Post STK > Stacking • Anode: 110 • Cathode: 148 GF NC reel Available lot 4/5 line • AN: 357 • CA: 421 Thank you May 26, 2025 at 6:01 AM, 김현태 : NC CA AGV #2 error. Thanks May 26, 2025 at 6:07 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Nagy Zsolt, Kasztel Balázs Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(4): GF: Novák Zoltán, Zsurbej Zsolt 1F: Novák Károly, Kovács Szabolcs, Modul(3): Martina Dávid, Nagy Gábor, Magyar Balázs May 26, 2025 at 6:18 AM, duzzaman Md (MCS) : @FA Good morning! Kindly check E0STKA51_B01 CV driven timeover Thank you ! May 26, 2025 at 6:49 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun Assem GF CHOI Myoungwoon May 26, 2025 at 7:00 AM, duzzaman Md (MCS) : @FA Please check C1STKA71_P22 is OOS becaus of INV 02 RUNTIME OVER error. Thank you! May 26, 2025 at 7:08 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 30 • Cathode: 00 Pre STK > VD • Anode: 31 • Cathode: 00 Post STK > Stacking • Anode: 94 • Cathode: 146 GF NC reel Available lot 4/5 line • AN: 346 • CA: 414 Thank you May 26, 2025 at 7:12 AM, Ynja/ivancsa FA : C0PVC030 error please check it May 26, 2025 at 7:19 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_M08 there is STP-01 Up Error. Thank you! May 26, 2025 at 7:57 AM, 인제(Hwang) : @FA Please move the plate in An VD 5-4(#40) to the warehouse. The equipment needs repair May 26, 2025 at 8:09 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_09_008 there is Data loss error Thank you! May 26, 2025 at 8:11 AM, 김현태 : NC CA AGV #4 error. Thanks May 26, 2025 at 8:13 AM, Dániel Hufnágel : MLA0142(Plate) MA4406 MA2120 MA2528 MA4469 MA1287 MA2108 MLA4211(Plate) MA2030 MA1333 MA1576 MA5364 MA5228 MA1366 Hibás plate fül miatt kivettük a termelésből May 26, 2025 at 8:48 AM, Sazzad Bhai SKon : E0STKC52 reels available Ford: 362 Hyundai: 431 May 26, 2025 at 8:51 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 19 • Cathode: 04 Pre STK > VD • Anode: 37 • Cathode: 00 Post STK > Stacking • Anode: 90 • Cathode: 165 GF NC reel Available lot 4/5 line • AN: 334 • CA: 419 Thank you May 26, 2025 at 8:57 AM, duzzaman Md (MCS) : E0STKC51 reels available Ford: 413 Hyundai: 103 May 26, 2025 at 9:15 AM, 김현태 : NC CA AGV #4 error. Thanks May 26, 2025 at 10:30 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 12 • Cathode: 00 Pre STK > VD • Anode: 23 • Cathode: 03 Post STK > Stacking • Anode: 110 • Cathode: 182 GF NC reel Available lot 4/5 line • AN: 315 • CA: 425 Thank you May 26, 2025 at 12:07 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 17 • Cathode: 00 Pre STK > VD • Anode: 12 • Cathode: 00 Post STK > Stacking • Anode: 129 • Cathode: 180 GF NC reel Available lot 4/5 line • AN: 286 • CA: 438 Thank you May 26, 2025 at 12:30 PM, duzzaman Md (MCS) : @Manufacturing Please check Circular conveyor C1CNV072 please check port M04 1+2 carriers are waiting. May 26, 2025 at 2:06 PM, Simon Dávid D SL NC : @FA hello NC CA #3 robot error,megnéznétek köszönöm May 26, 2025 at 2:06 PM, Zsurbej Zsolt F.A. : Megyünk May 26, 2025 at 2:50 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 07 • Cathode: 00 Pre STK > VD • Anode: 28 • Cathode: 00 Post STK > Stacking • Anode: 111 • Cathode: 177 GF NC reel Available lot 4/5 line • AN: 295 • CA: 438 Thank you May 26, 2025 at 3:25 PM, Ynja/ivancsa FA : @duzzaman Md (MCS) AGV7 is not placing the material into VD CA 5-6 chamber. MES is showing an error. Could you please check it? May 26, 2025 at 3:30 PM, duzzaman Md (MCS) : @FA @ACS PLEASE CHECK MENTIONED AGV7 IT HAD 'FORK 1 LD/UD REQ NOT RECEIVED ERROR" AFTER THE ALARM IS CLEARED ITS IN PARKED STATE. May 26, 2025 at 3:33 PM, Simon Dávid D SL NC : @FA hello NC CA 1/1 ,magazin lift error,megnéznétek köszönöm May 26, 2025 at 4:40 PM, 김희래 : @FA Please check CA NC AGV#10.(Manual status). Now 4 Vehicles are delaying. May 26, 2025 at 5:24 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 39 • Cathode: 00 Post STK > Stacking • Anode: 112 • Cathode: 194 GF NC reel Available lot 4/5 line • AN: 274 • CA: 458 Thank you May 26, 2025 at 5:48 PM, 김현태 : NC AN AGV #10 error. Thanks May 26, 2025 at 6:01 PM, Shakir (MCS) : @FA Please check E0CNVC52_09_008/M08 there is Data loss error Thank you! May 26, 2025 at 6:20 PM, Baek Hojong(백호종)FA : Night shift FA Date: 2025.05.26 Time:18:00~06:00 Baek Hojong 백호종PM 1. Elec 송태용 (Song Taeyong) 2. Assy 1F 김종원 (Kim Jongwon) GF 오은향 (OH Eunhyang) May 26, 2025 at 6:27 PM, 정은탁 (Jung EunTak) : @FA NC Ca 6-2 AGV Error. Please Check. May 26, 2025 at 6:28 PM, 정은탁 (Jung EunTak) : @FA NC Ca 6-2 AGV #2 Error. Please Check. May 26, 2025 at 6:29 PM, Baek Hojong(백호종)FA : @은향(OH EUN HYANG) @김종원 금일 몽골작업자분들 조치가 미흡할수 있으니 두분이서 카톡방 주시하시고 요청시 빠른 대응 부탁드립니다 May 26, 2025 at 6:31 PM, Lajos Gábor F.A. : Done May 26, 2025 at 6:35 PM, Baek Hojong(백호종)FA : @Lajos Gábor F.A. Ca C1STKC71 Check plz Oversize error May 26, 2025 at 6:39 PM, Lajos Gábor F.A. : Done May 26, 2025 at 6:41 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 10 • Cathode: 02 Post STK > Stacking • Anode: 139 • Cathode: 182 GF NC reel Available lot 4/5 line • AN: 275 • CA: 463 Thank you May 26, 2025 at 7:12 PM, Zaya/ivancsa FA : @Shakir (MCS) Hello, Pls delete job GF VD Ca side agv10, Chamber is empty May 26, 2025 at 7:17 PM, Shakir (MCS) : AGV10 unassigned, AGV02 assigned for carrier MLC3157. Thank you May 26, 2025 at 7:25 PM, Shakir (MCS) : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you! May 26, 2025 at 7:26 PM, Shakir (MCS) : @Lajos Gábor F.A. May 26, 2025 at 7:26 PM, Tuya Ivancsa FA : @Shakir (MCS) Hello, Pls delete job GF VD Ca side agv#2 Chamber is empty May 26, 2025 at 7:26 PM, Zaya/ivancsa FA : This message was deleted. May 26, 2025 at 7:28 PM, Shakir (MCS) : Job has been cancelled. Thank you May 26, 2025 at 7:31 PM, Baek Hojong(백호종)FA : @은향(OH EUN HYANG) @김종원 양음극 순환물류 막히는일 없게 집중 모니터링 해주시고 전후창고 크레인 에러 및 무언정지 실시간으로 확인해주셔야 되요 노칭 다관절로봇 및 노칭포트 LR UR 이상한점 보인다 싶으면 바로 헝가리 테크니션 찾아서 전달하고 키오스크 모니터링도 좋지만 그때그때 패트롤 하시면서 체크부탁드립니다 두분! May 26, 2025 at 7:31 PM, Shakir (MCS) : Need confirmation chamber 6-7 empty, In MCS there is one carrier left. Thank you @Tuya Ivancsa FA May 26, 2025 at 7:36 PM, Zaya/ivancsa FA : chamber 6-7 empty May 26, 2025 at 7:54 PM, T. Gàbornè C SL NC : @MCS Please check GF CA Reel warehouse, no reels come, M02-M06 port. Thank you very much. May 26, 2025 at 7:57 PM, Shakir (MCS) : Job exists for M02-M06, I am increasing the priority for Reel CA. Thank you May 26, 2025 at 8:14 PM, Shakir (MCS) : @FA @Lajos Gábor F.A. Please check E0STKC51_ B08/B09 and B10 cargo exist , carrier are not moving blocking the reel. Thank you May 26, 2025 at 8:31 PM, Shakir (MCS) : Issue has been resolved, reels are coming on M2-M06. Thank you May 26, 2025 at 8:54 PM, Shakir (MCS) : @FA Please check C1STKC71_P20/19 there is Light curtain error. Thank you May 26, 2025 at 9:00 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 149 • Cathode: 188 GF NC reel Available lot 4/5 line • AN: 269 • CA: 487 Thank you May 26, 2025 at 9:31 PM, T. Gàbornè C SL NC : @Fa Légyszíves nézzétek meg CA 6#3-nál a mgz kitöltést,mert leállt. Köszönöm szépen May 26, 2025 at 10:16 PM, T. Gàbornè C SL NC : @Fa Please check VD CA 5_07 only 1 Pallet in the oven. Thank you. May 26, 2025 at 10:17 PM, T. Gàbornè C SL NC : @Shakir (MCS) Please check VD. Thank you for much. May 26, 2025 at 10:36 PM, Shakir (MCS) : There is ID read fail for plate MLC3209 that’s why one plate remaining inside VD. @Zaya/ivancsa FA please transfer remaining plate to STKC72. Thank you May 26, 2025 at 11:40 PM, Shakir (MCS) : @FA Please check C1CNV072_P04/P03 light curtain error Thank you May 26, 2025 at 11:48 PM, Shakir (MCS) : @Manufacturing Please check Circular conveyor C1CNV072 please check port M01 1+3 carriers are waiting. Thank you May 26, 2025 at 11:48 PM, Lajos Gábor F.A. : MCS Could you check please C1CNV072_P14. MLC2109 not moving May 26, 2025 at 11:50 PM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA please support stack conveyor runtime error May 26, 2025 at 11:50 PM, Shakir (MCS) : Check port 16049 OOS May 26, 2025 at 11:51 PM, Shakir (MCS) : C1CNV072_16_049 May 27, 2025 at 12:04 AM May 27, 2025 at 12:04 AM, T. Gàbornè C SL NC : @FA Please send CA VD 1_01 plate the Storage, this mashine NFB off state error. Thank you. May 27, 2025 at 12:25 AM, QuangPhan : Hello! @FA NC AN Robot #1 error. Thanks May 27, 2025 at 12:40 AM, Lajos Gábor F.A. : Done May 27, 2025 at 1:03 AM, Shakir (MCS) : @FA Please check C1CNV072_P04. Data mismatch error. Thank you May 27, 2025 at 1:04 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 there is Load Oversize error. Thank you! May 27, 2025 at 1:04 AM, F.A.briczius Gergő : I am on way May 27, 2025 at 1:09 AM, T. Gàbornè C SL NC : @Fa Kérlek gyertek CA Robot 3 -hoz. MGZ detect sensor alarm van. Köszönöm szépen May 27, 2025 at 1:21 AM, F.A.briczius Gergő : Done May 27, 2025 at 1:32 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 180 • Cathode: 193 GF NC reel Available lot 4/5 line • AN: 279 • CA: 529 Thank you May 27, 2025 at 1:58 AM, T. Gàbornè C SL NC : @FA Please check CA VD 1_07, 1_08 AGV move the palet in the machine but VD no start. Thank you for much. May 27, 2025 at 2:41 AM, QuangPhan : Hello! @AGV @FA. An error occurred on NC AN 5/2 . The empty mgz storage outline area was filled with 6 full mgz. The AGV mistakenly inserted full mgz (C5NCA020_P04). May 27, 2025 at 2:46 AM, QuangPhan : @Shakir (MCS) please check. Thank you May 27, 2025 at 2:54 AM, Shakir (MCS) : Manual Job created by OP, Source AGV_10 to destination port C5NCA020_P04. May 27, 2025 at 2:57 AM, Lajos Gábor F.A. : I take it out with agv and send back to the warehouse May 27, 2025 at 3:13 AM, Shakir (MCS) : Additionally UR from NC CA 5-2, MA3336 at 22:59, to destination C0PVA020_P14, AGV10 assigned and there was several time job terminated from 23:37, 23:44, 23:45,23:50, 23:52, 00:02, 00:05 with return code 6, after that manual Job created by OP, from Source AGV_10 to destination port C5NCA020_P04. Thank you Thank you May 27, 2025 at 3:13 AM, QuangPhan : Hello! @Shakir (MCS) Please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 27, 2025 at 3:17 AM, Shakir (MCS) : @FA @ACS @Lajos Gábor F.A. Please check UNK carrier at NC AN 2/2 P02 AGV not assigning. MCS reply is okay. Thank you May 27, 2025 at 3:27 AM, Lajos Gábor F.A. : Agv 2 just take out mgz from p01, p02 waiting for free agv May 27, 2025 at 3:43 AM, T. Gàbornè C SL NC : @FA Please send the plate, CA VD 1_08 in the Storage. Plate sensor error the chamber. Thank you. May 27, 2025 at 4:21 AM, Shakir (MCS) : @FA Please check E0STKC51_M01 run time over error. Thank you May 27, 2025 at 4:55 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 01 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 168 • Cathode: 169 GF NC reel Available lot 4/5 line • AN: 283 • CA: 535 Thank you May 27, 2025 at 5:12 AM, Shakir (MCS) : @FA @Lajos Gábor F.A. Please check E0STKA51_C02 - MCP AP error Thank you May 27, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:9/13+2 overtime Overtime (2): Böröcz Tamás, Cehman Zsolt Sick (0):- Holiday (4): Nagy Zsolt, Novák Zoltán, Zsurbej Zsolt, Martina Dávid Shift change(0): Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Cehman Zsolt Assembly(4): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Böröcz Tamás Modul(2): Nagy Gábor, Magyar Balázs May 27, 2025 at 6:34 AM, Jun(정우준)_SKOH FA : Day shift 05.26 06:00-18:00 Jeong woojun Assem GF CHOI Myoungwoon May 27, 2025 at 7:12 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 13 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 143 • Cathode: 149 GF NC reel Available lot 4/5 line • AN: 282 • CA: 537 Thank you May 27, 2025 at 7:16 AM, duzzaman Md (MCS) : @FA GOOD MORNING! Please check C1CNV072 Its OOS. Thank you May 27, 2025 at 7:18 AM, 카스텔 발라지 F.A. : Done May 27, 2025 at 7:46 AM, 인제(Hwang) : NC An AGV#10 check please May 27, 2025 at 8:17 AM, duzzaman Md (MCS) : @FA Please check C1STKC71_C02, it's OOS Thank you ! May 27, 2025 at 8:19 AM, Ynja/ivancsa FA : @duzzaman Md (MCS) please check it VD CA 6-10 and 6-7 half chamber May 27, 2025 at 8:26 AM, duzzaman Md (MCS) : 6-10, 6-7 Materials will be delivered when best lot will be available. May 27, 2025 at 8:29 AM, duzzaman Md (MCS) : This message was deleted. May 27, 2025 at 8:30 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check the following duplicated plates: Plate 1: UNKDUP-MLC4064 (C1STKC72, 0200103) Plate 2: UNKDUP-MLA1240 (C1STKA72, 0200201) Plate 3: UNKDUP-MLC4217 (C1STKC72, 0200201) Plate 4: UNKDUP-MLC4064-B (C1STKC72, 0105703) Plate 5: UNKDUP-MLC1007 (C1STKC72, 0100301) Plate 6: DUP250524004621975KP (C1STKC72, 0205202) May 27, 2025 at 8:34 AM, duzzaman Md (MCS) : @FA Please could you check C1STKC71_P22 there is PIO Busy on time over error Thank you very much May 27, 2025 at 8:34 AM, 카스텔 발라지 F.A. : We'll take a look as soon as we have time. May 27, 2025 at 8:36 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_M08 there is STP-01 UP error Thank you! May 27, 2025 at 8:37 AM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA please check agv alarm at NC AN May 27, 2025 at 8:37 AM, Simon Dávid D SL NC : @FA hello NC CA #9 AGV error ,megnéznétek köszönöm May 27, 2025 at 8:38 AM, duzzaman Md (MCS) : Please also check the RTV on the Anode side. May 27, 2025 at 8:39 AM, Dániel Hufnágel : Can you check me please why full tray go back to the storage please ? May 27, 2025 at 8:39 AM, 카스텔 발라지 F.A. : We are already working on it May 27, 2025 at 8:41 AM, duzzaman Md (MCS) : Could you help us with the port / carrier no ? Is it M08 ? May 27, 2025 at 8:44 AM, Dániel Hufnágel : On 7038/7039/7040/7041 May 27, 2025 at 8:45 AM, Dániel Hufnágel : LTA0069,LTA1798,LTA1630,LTA1590 May 27, 2025 at 8:45 AM, duzzaman Md (MCS) : Thank you. Checking May 27, 2025 at 8:47 AM, Sazzad Bhai SKon : Hello Daniel, they still have jobs. For example: LTA1798 back to the CNV because BP10 is oos. When BP ports comes to in-service job will be completely May 27, 2025 at 8:47 AM, Sazzad Bhai SKon : *completed May 27, 2025 at 9:06 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 22 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 107 • Cathode: 150 GF NC reel Available lot 4/5 line • AN: 275 • CA: 509 Thank you May 27, 2025 at 9:22 AM, 인제(Hwang) : @Jun(정우준)_SKOH FA NC An AGV#10 An 4-1 아웃포트 앞에서 센서에러로 인해 빨간등 점멸되며 멈추는 현상 지속발생됩니다. 해당 AGV 점검 부탁드리겠습니다 May 27, 2025 at 9:29 AM, 카스텔 발라지 F.A. : @duzzaman Md (MCS) I take the plates out of the AN VD 5-1/5-2/5-3 machines and send them to warehouse 72, because the Technicians calibrating the chambers. May 27, 2025 at 9:53 AM, duzzaman Md (MCS) : @FA Please check E0STKC51 , C02 “PIO TR off timer over error. Thanks May 27, 2025 at 10:03 AM, Novák Károly F. A. : Solved May 27, 2025 at 10:03 AM, Ivan Chobitko : @MCS Hello Please greas up priority for CA material for L4-5-6 ST May 27, 2025 at 10:12 AM, duzzaman Md (MCS) : Did it. The process is normal. May 27, 2025 at 10:14 AM, Ivan Chobitko : I just see large count CA material, but lines almost empty May 27, 2025 at 10:14 AM, Ivan Chobitko : Thank you May 27, 2025 at 10:27 AM, 카스텔 발라지 F.A. : Please share it again, Thank you very much May 27, 2025 at 10:28 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 28 Pre STK > VD • Anode: 10 • Cathode: 01 Post STK > Stacking • Anode: 92 • Cathode: 129 GF NC reel Available lot 4/5 line • AN: 279 • CA: 502 Thank you May 27, 2025 at 10:30 AM, 카스텔 발라지 F.A. : @Cao thi my linh May 27, 2025 at 10:37 AM, Ynja/ivancsa FA : C0PVC030 error please check it May 27, 2025 at 10:42 AM, Simon Dávid D SL NC : @FA hello NC CA #7 AGV error,megnéznétek köszönöm May 27, 2025 at 10:45 AM, duzzaman Md (MCS) : @FA Please check C1STKC71_P17/18, OP ports. Data mismatch error. Thank you! May 27, 2025 at 10:48 AM, Novák Károly F. A. : Done May 27, 2025 at 11:27 AM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) can you make Ca/An 5 jobs for ST CV from C1CNV072?? May 27, 2025 at 11:29 AM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) oh, sorry, only 10 ca plate. May 27, 2025 at 11:29 AM, duzzaman Md (MCS) : Could you tell us, for which line you would like it. There are existing jobs May 27, 2025 at 11:30 AM, duzzaman Md (MCS) : So, from c1stkc72 to M01 . Right? May 27, 2025 at 11:30 AM, Jun(정우준)_SKOH FA : I will take it manually. so can you send it to C1STKC72_M01 May 27, 2025 at 11:30 AM, Jun(정우준)_SKOH FA : yes yes. May 27, 2025 at 11:34 AM, duzzaman Md (MCS) : 10 materials released. Thank you May 27, 2025 at 12:20 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 17 Pre STK > VD • Anode: 17 • Cathode: 03 Post STK > Stacking • Anode: 96 • Cathode: 105 GF NC reel Available lot 4/5 line • AN: 287 • CA: 493 Thank you May 27, 2025 at 12:25 PM, duzzaman Md (MCS) : @Fa Kindly check c1stkc72_m02 Data loss error May 27, 2025 at 1:16 PM, 카스텔 발라지 F.A. : @duzzaman Md (MCS) I take the plates out of the AN VD 4-6/4-7 machines and send them to warehouse 72, because the Technicians calibrating the chambers. May 27, 2025 at 1:16 PM, duzzaman Md (MCS) : Thank you for informing May 27, 2025 at 1:20 PM, 김현태 : NC CA AGV #3 error. Thanks May 27, 2025 at 1:52 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 10 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 105 • Cathode: 82 GF NC reel Available lot 4/5 line • AN: 297 • CA: 470 Thank you May 27, 2025 at 2:05 PM, Jun(정우준)_SKOH FA : GF ST AN 순환물류 매뉴얼포트에 16024 화물 긴급하게 빼주셔야 합니다! @Lili @🌌Lilla(한소라)🌠 May 27, 2025 at 2:06 PM, Lili : A GF anód Stacking conveyoron a manuál porton a 16024-es anyagot sürgősen ki kell venni! May 27, 2025 at 2:07 PM, KIM SEYEON [김세연]_FA : @Dear assembly operators please remove manual port magazine plate. May 27, 2025 at 2:11 PM, 전 운 (Jeon Woon) : 뺏어요 May 27, 2025 at 2:11 PM, Jun(정우준)_SKOH FA : 감사합니다~! May 27, 2025 at 2:20 PM, duzzaman Md (MCS) : @FA Please check E0STKC51_M02 there is STP-01 Down Cylinder error Thank you! May 27, 2025 at 2:21 PM, Dániel Hufnágel : Done May 27, 2025 at 2:26 PM, 김주연 : @제조 GF stacking 남측 매뉴얼포트 (M04) 에 출고된 플레이트 확인 후 재입고 부탁드립니다. May 27, 2025 at 2:31 PM, 전 운 (Jeon Woon) : 이미 FA쪽에서 빼서 사용해달라고 해서 출고 후 현장 투입했습니다. May 27, 2025 at 2:35 PM, 김주연 : 넵 아직 뒤에 4 플레이트 정도 출고 예정입니다. May 27, 2025 at 2:36 PM, 전 운 (Jeon Woon) : 풀플레이크를 말씀하시는건가요 빈플레이트를 말씀하시는건가요 May 27, 2025 at 2:38 PM, 전 운 (Jeon Woon) : 그쪽으로 풀플레이트가 나오면 안될텐데요 May 27, 2025 at 2:44 PM, 김주연 : 네 empty 이고 대부분 magazine not closed 에러잊니다 May 27, 2025 at 2:50 PM, 김희용 : 풀플레이트도 Station에서 Full자재를 실수로 UR 하면 AGV Port 입고 후 M Port로 나오게 되어있습니다 May 27, 2025 at 2:53 PM, 전 운 (Jeon Woon) : 그경우는 저도 알고는 있습니다. May 27, 2025 at 2:57 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 107 • Cathode: 104 GF NC reel Available lot 4/5 line • AN: 314 • CA: 447 Thank you May 27, 2025 at 4:00 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 112 • Cathode: 112 GF NC reel Available lot 4/5 line • AN: 326 • CA: 456 Thank you May 27, 2025 at 4:49 PM, 인제(Hwang) : NC An Robot#2 Error May 27, 2025 at 4:54 PM, Novák Károly F. A. : Checking May 27, 2025 at 5:05 PM, Novák Károly F. A. : Solved May 27, 2025 at 5:14 PM, Simon Dávid D SL NC : @FA hello VD CA #4 AGV error,megnéznétek köszönöm May 27, 2025 at 5:22 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello aVD CA 5-8-as kemence meghibásodot a kemencébe lévő anyagot áttetük manuálisan a 5-9-es kemencébe.Törölnéd az 5-8-as adatait,köszönöm May 27, 2025 at 5:22 PM, 전 운 (Jeon Woon) : @MCS 2Line Station C2STM190_P02 UR Please Missmatch alarm May 27, 2025 at 5:29 PM, duzzaman Md (MCS) : Done May 27, 2025 at 5:29 PM, duzzaman Md (MCS) : Checking May 27, 2025 at 5:34 PM, duzzaman Md (MCS) : Could you tell me the carrier number which is in P02 ? May 27, 2025 at 5:34 PM, 전 운 (Jeon Woon) : MLA2044 May 27, 2025 at 5:39 PM, duzzaman Md (MCS) : Please press UR now May 27, 2025 at 5:40 PM, 전 운 (Jeon Woon) : Press May 27, 2025 at 5:40 PM, Sazzad Bhai SKon : Fyi, did you manually remove the carrier from stack CNV P27? May 27, 2025 at 5:41 PM, Sazzad Bhai SKon : UR not received May 27, 2025 at 5:44 PM, duzzaman Md (MCS) : We received LR instead. Please transfer it manually to the CNV. May 27, 2025 at 5:45 PM, duzzaman Md (MCS) : There location was updated in MCS already May 27, 2025 at 6:15 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 - C02 Load over size error. May 27, 2025 at 6:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 03 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 108 • Cathode: 137 GF NC reel Available lot 4/5 line • AN: 343 • CA: 444 May 27, 2025 at 7:43 PM, VK (mcs) : @FA Please check Anode reel STK A52 There is no error but cranes are stopped. May 27, 2025 at 7:44 PM, Kertész Dániel : @VK (mcs) good evening! The operators can't send back the LTA0648 from the E0STKA51_M10 port, because there is a "MCS buzzer" error. Could you check it please? (This carrier now is emptyempty) May 27, 2025 at 7:47 PM, VK (mcs) : carrier status in MES and MCS is different. Please again rack it out and then rack-in. May 27, 2025 at 7:54 PM, Yaroslav SL/C 6 line : Hello everyone @fa AGV7 stopped near ST conveyor 456 lines port IN P02. Please check. Thanks May 27, 2025 at 7:57 PM, KIM SEYEON [김세연]_FA : @Khaliun/Ivancsa FA please chevk May 27, 2025 at 8:10 PM, Khaliun/Ivancsa FA : @MCS VD CA 4/5 champer has no material, please cancel the job May 27, 2025 at 8:13 PM, VK (mcs) : Job cancelled May 27, 2025 at 8:13 PM, Khaliun/Ivancsa FA : Thank you May 27, 2025 at 8:18 PM, Khaliun/Ivancsa FA : @MCS VD CA champer has 1 material MLC4028, please check it out, thank you May 27, 2025 at 8:18 PM, VK (mcs) : Which machine? May 27, 2025 at 8:23 PM, Kertész Dániel : Check pls VD CA AGV#4 May 27, 2025 at 8:24 PM, Khaliun/Ivancsa FA : VD CA 4/5 May 27, 2025 at 8:24 PM, Khaliun/Ivancsa FA : Champer May 27, 2025 at 8:25 PM, VK (mcs) : But you said no material exists in the port and I cancelled the job. Is there any carrier in port? May 27, 2025 at 8:26 PM, Kertész Dániel : This port is empty. There is no material at all. May 27, 2025 at 8:38 PM, T. Gàbornè C SL NC : @FA Please check CA AGV #9. Thank you for much May 27, 2025 at 8:41 PM, T. Gàbornè C SL NC : Dear @FA Please check VD CA side 5_07 unloaded AGV but 1 plate left. Thanks. May 27, 2025 at 9:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 01 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 112 • Cathode: 136 GF NC reel Available lot 4/5 line • AN: 338 • CA: 424 May 27, 2025 at 9:42 PM, 조범희 : @FA 안녕하세요 Stack 2라인 앞 OUT Fort 에서 플레이트 배출시 플레이트에있는 매거진이 스토퍼와 충돌 발생해서 전극이 손상되었습니다 음극 양극 매거진 각1개로 점검 및 확인 부탁드립니다 May 27, 2025 at 9:42 PM, Baek Hojong(백호종)FA : 전달받았고 확인 및 점검하겠습니다 May 27, 2025 at 9:42 PM, 조범희 : 네 감사합니다 May 27, 2025 at 9:53 PM, 정은탁 (Jung EunTak) : @FA VD An#30(4-3) AGV#9 Error. Please Check. May 27, 2025 at 10:45 PM, VK (mcs) : @FA Please check Cathode pre-STK C71 - C02 MCP AP error. May 27, 2025 at 10:46 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 -port 22(12001) Auto step time over error. May 27, 2025 at 10:48 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 Unit(7048) Data mismatch error. May 27, 2025 at 10:50 PM, VK (mcs) : Thanks for quick response 🙏 May 27, 2025 at 11:26 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 97 • Cathode: 134 GF NC reel Available lot 4/5 line • AN: 345 • CA: 404 May 27, 2025 at 11:27 PM, T. Gàbornè C SL NC : @FA Please check CA Robot #2 mgz sensor detect error Thx May 27, 2025 at 11:42 PM, VK (mcs) : @Manufacturing Please check Cathode reel conveyor C52 Port M07(9034) Direction of port is output. Please switch it to input. Then carrier can be transferred. Thx May 28, 2025 at 12:08 AM May 28, 2025 at 12:08 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 21 (13002) MLC4131 is not moving. May 28, 2025 at 12:31 AM, T. Gàbornè C SL NC : @FA Please check CA AGV #2 Machine no take out the plate. Thx. May 28, 2025 at 1:27 AM, VK (mcs) : @FA Can you please check it. Job is waiting for a while. Thx May 28, 2025 at 1:28 AM, QuangPhan : Hello! @FA @AGV . VD An 6/3 #48 the plates was wrong position . Please use agv to fix it . thank you. May 28, 2025 at 2:10 AM, QuangPhan : Hello! @FA @ AGV Could you please transfer the plates in VD AN 6/3 #48 to KA72 . the technicians repair machine start. Thank you May 28, 2025 at 2:21 AM, Nagy Tamás FA : Done May 28, 2025 at 2:39 AM, T. Gàbornè C SL NC : Dear @FA CA VD 6_08 NFB off state error , please send the plate in the storage. Thank you. May 28, 2025 at 2:40 AM, VK (mcs) : @FA Please check Anode reel STK A52 C01 Fork2 load position error. May 28, 2025 at 3:40 AM, T. Gàbornè C SL NC : @FA Please send the plate in the Storage. Thank you for much May 28, 2025 at 3:53 AM, T. Gàbornè C SL NC : @,FA Please check VD CA 4_02 and 4_05 only made 2 plates in AGV. Thanks. May 28, 2025 at 4:00 AM, VK (mcs) : VD Cathode 4/5 Job terminated by me due to alarm in AGV on the request of operations. Currently we received LR for empty ports and material will deliver as soon as availability. VD cathode 4/2 Also received LR at 2:40 May 28, 2025 at 4:12 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 118 • Cathode: 146 GF NC reel Available lot 4/5 line • AN: 344 • CA: 373 May 28, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 28, 2025 at 6:23 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 120 • Cathode: 144 GF NC reel Available :- • AN: 326 • CA: 357 Thank you very much! May 28, 2025 at 6:52 AM, 인제(Hwang) : NC An AGV#10 check please May 28, 2025 at 7:31 AM, Mohammad Amir : Good morning@Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 28, 2025 at 7:35 AM, Ynja/ivancsa FA : @Mohammad Amir Please delete job AGV#03 in NC AN double storage May 28, 2025 at 7:35 AM, Mohammad Amir : Checking May 28, 2025 at 7:38 AM, Mohammad Amir : Job has been terminated as requested ✅. Thank you very much! May 28, 2025 at 7:51 AM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) 전일이랑 증상 동일합니다. 점검 진행된걸까요? May 28, 2025 at 7:53 AM, 이주봉PM LEE JUBONG(FA) : 네 바로 점검하겠습니다 May 28, 2025 at 8:13 AM, Mohammad Amir : @FA @Vékony Ferenc Please check E0CNVA52_RTV01 there is Lift Unload dest port auto off error and because of this Reels delivery has been stopped. Thank you very much! May 28, 2025 at 8:18 AM, Mohammad Amir : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you very much! May 28, 2025 at 8:19 AM, Sazzad Bhai SKon : @FA @Manufacturing Please check the following duplicated plates: Plate 1: UNKDUP-MLC4213 (C1STKC72, 0200602) Plate 2: UNKDUP-MLC4217 (C1STKA72, 0205201) Plate 3: UNKDUP-MLC1007 (C1STKC72, 0205802) Plate 4: DUP25052800 (C1STKA72, 0105002) Plate 5: DUP25052400 (C1STKC72, 0205202) May 28, 2025 at 9:09 AM, Nguyên : please check for me. 1/2 AN GF NC machine. MGZ empty not delivered May 28, 2025 at 9:09 AM, Mohammad Amir : Checking May 28, 2025 at 9:11 AM, Mohammad Amir : There is an active LR but currently there is no Lot available at the O/P ports of Gantry as soon as it will be available jobs will be created. Thank you very much! May 28, 2025 at 9:31 AM, Mohammad Amir : @FA @Manufacturing Please check LTA0261 located at E0CNVA52_07_052 it is not moving and blocking reels delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! May 28, 2025 at 10:14 AM, Ynja/ivancsa FA : @Mohammad Amir Please check the VD AN 2-5 half chamber May 28, 2025 at 10:14 AM, Mohammad Amir : Checking May 28, 2025 at 10:16 AM, Mohammad Amir : There is an active LR at 10:13 as soon as materials will be available jobs will be created for remaining half chamber. Thank you very much! May 28, 2025 at 10:18 AM, Barta Rudi : @MCS Hello. Empty magazines are arriving very slowly on the notching cathode side. Could someone check what the issue is? May 28, 2025 at 10:18 AM, Mohammad Amir : Hello, Checking. May 28, 2025 at 10:22 AM, Mohammad Amir : I investigated,everything is normal ✅ Currently AGV #13,#16,#3 on the way. I am monitoring. Thank you very much! May 28, 2025 at 10:27 AM, Anita Mirosnicsenko : Hello! L2 STK AGV #10 stop, please check! Thank you! May 28, 2025 at 10:30 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 12 Pre STK > VD • Anode: 00 • Cathode: 08 Post STK > Stacking • Anode: 108 • Cathode: 86 GF NC reel Available :- • AN: 310 • CA: 328 Thank you very much! May 28, 2025 at 10:40 AM, Mohammad Amir : For your information:- AGV#10 on the way to 6-1. AGV#6 on the 1-1. AGV#4 on the way to 5-2. I am monitoring. Thank you very much! May 28, 2025 at 10:51 AM, Barta Rudi : @FA The AGV placed two plate materials into VD CA 1-5 #05 at an angle. Please check it urgently!! May 28, 2025 at 11:06 AM, 전 운 (Jeon Woon) : @FA @MCS GF ST C/V In Port P25 State Check Please. AGV#1 PIO Error occurs when fork is operated May 28, 2025 at 11:41 AM, 김주연 : @FA E0STKA52 크레인 H/S 쪽 DATA MISMATCH ERROR 입니다. May 28, 2025 at 11:45 AM, Mohammad Amir : @FA Please check E0STKA51_C01 there is Load Oversize Error (Left). Thank you! May 28, 2025 at 11:48 AM, Barta Rudi : @Mohammad Amir Please check why the AGV is not picking up these plates at the CA VD. They have been ready for more than 4 hours. 5-9 #45 07:23 6-7 #52 07:56 6-3 #48 08:28 5-3 #39 07:20 5-2 #38 07:38 2-5 #14 06:50 2-1 #10 06:51 thank you May 28, 2025 at 11:49 AM, Mohammad Amir : Checking May 28, 2025 at 11:59 AM, Mohammad Amir : Everything is good ✅ For 2-1 AGV#2 has been assigned. For 5-1,5-2,5-3 ,5-9,6-7,6-3 it is waiting for AGVs and currently all AGVs are busy. Thank you! May 28, 2025 at 11:59 AM, Mohammad Amir : @Barta Rudi May 28, 2025 at 1:06 PM, Barta Rudi : @Fa Cathode VD 4-4 agv9 stop, please check thank you May 28, 2025 at 1:13 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 15 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 93 • Cathode: 104 GF NC reel Available :- • AN: 305 • CA: 335 Thank you very much! May 28, 2025 at 1:19 PM, Mohammad Amir : @FA @Vékony Ferenc Please check MLA6160 located at C1CNV072_P13 it is not moving and blocking other carriers way. Thank you! May 28, 2025 at 1:39 PM, Barta Rudi : @Fa Cathode VD 4-9 agv5 stop, please check thank you May 28, 2025 at 1:51 PM, 김희래 : @FA VD AGV#5 detected obstacle. Please check May 28, 2025 at 1:52 PM, 김희래 : This message was deleted. May 28, 2025 at 1:53 PM, 김희래 : Cathode side. Sorry. May 28, 2025 at 2:05 PM, Eduard SL Shift A : line 6 ST 14 port is not working please check May 28, 2025 at 2:06 PM, Eduard SL Shift A : Ca May 28, 2025 at 2:36 PM, 동현 : @FA Please check GF NC AN AGV#8 May 28, 2025 at 2:37 PM, 동현 : It has been blocking other AGVs move. May 28, 2025 at 3:04 PM, Ynja/ivancsa FA : @Mohammad Amir Please check AGV#10 in NC CA Now idle May 28, 2025 at 3:04 PM, Mohammad Amir : Checking May 28, 2025 at 3:06 PM, Mohammad Amir : The job was terminated by the Operator at 14:19. Please send it to the STK. Thank you very much! May 28, 2025 at 3:16 PM, Barta Rudi : @mcs NC Ca 1/3 Agv does not take full magazines, please check, thank you May 28, 2025 at 3:16 PM, Mohammad Amir : Checking May 28, 2025 at 3:21 PM, Mohammad Amir : Issue has been resolved ✅ For 1-3_P01,AGV#9 has been assigned to take full magazine ✅. For 1-3 P02 , Job was cancelled by operator at 11:49. So pleas Press UR again so that AGV can take full magazine . Thank you very much! May 28, 2025 at 4:13 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 10 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 114 • Cathode: 127 GF NC reel Available :- • AN: 294 • CA: 325 Thank you very much! May 28, 2025 at 4:52 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 12 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 107 • Cathode: 127 GF NC reel Available :- • AN: 286 • CA: 323 Thank you very much! May 28, 2025 at 5:47 PM, Barta Rudi : @Mohammad Amir C1STKC71 – the warehouse has stopped due to an issue. Please check, thank you May 28, 2025 at 5:48 PM, Mohammad Amir : @FA Please check there is Light curtain error in C1STKC71_C01. Thank you very much! May 28, 2025 at 5:57 PM, Truong : NC Ca robot #3 C0PVC030 error please come check @FA May 28, 2025 at 5:59 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.28. "B" műszak, 8+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Böröczki Balázs, Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(2): Pálosi Róbert, Czeilinger Krisztián, --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin ------------- May 28, 2025 at 6:09 PM, 김지수PM(Gyuri)_FA : @manufacturing Please be careful not to make unloading request with full magazine in stacking station May 28, 2025 at 7:48 PM, 김지수PM(Gyuri)_FA : @FA please check E0CNVC52(RTV) May 28, 2025 at 7:48 PM, Csanálosi Gábor FA : Omw May 28, 2025 at 7:52 PM, Csanálosi Gábor FA : Done May 28, 2025 at 7:54 PM, 김지수PM(Gyuri)_FA : Thanks!!! 🫠 May 28, 2025 at 8:06 PM, 김지수PM(Gyuri)_FA : @FA please check E0CNVA52 Thanks in advance May 28, 2025 at 8:07 PM, 김지수PM(Gyuri)_FA : Data is still remaining on 7050 track, I will remove it(data was transferred to 7004) May 28, 2025 at 8:08 PM, Csanálosi Gábor FA : Going there May 28, 2025 at 8:14 PM, Nguyen Huy : @FA AGV #4 error near NC CA 2-3, pls check May 28, 2025 at 8:19 PM, 이한웅(삼구) : Please check NC An RTV May 28, 2025 at 8:19 PM, Csanálosi Gábor FA : Coming May 28, 2025 at 8:19 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 19 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 130 • Cathode: 143 GF NC reel Available :- • AN: 293 • CA: 328 May 28, 2025 at 8:20 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 16056-15054 Runtime over. May 28, 2025 at 8:21 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check May 28, 2025 at 8:26 PM, Csanálosi Gábor FA : Done May 28, 2025 at 8:37 PM, 김지수PM(Gyuri)_FA : @Dariimaa/다리마/Ivancsa C1CNV072 please check it May 28, 2025 at 8:37 PM, Dariimaa/다리마/Ivancsa : We are working May 28, 2025 at 8:38 PM, Dariimaa/다리마/Ivancsa : Done May 28, 2025 at 8:48 PM, 김지수PM(Gyuri)_FA : This message was deleted. May 28, 2025 at 8:49 PM, 이민재 : 조치중 후창고 크레인 알람으로 멈춤 발생으로 조치후 다른 구연 미스메치 발생하여 지치했습니다 May 28, 2025 at 8:52 PM, 김지수PM(Gyuri)_FA : 넵, 감사합니다,지금 GF 음극쪽에 캐리어들 몰려있어서 모니터링 좀 부탁드리겠습니다. 인접해있는 인포트로 목적지 바꿔서 넣겠습니다. May 28, 2025 at 9:45 PM, VK (mcs) : @Manufacturing There is a carrier in anode reel conveyor E0CNVA52-M01 (7037) LTA0290 which has been there for a long time. Can you please confirm. Thx May 28, 2025 at 9:46 PM, VK (mcs) : M10* May 28, 2025 at 10:15 PM, Noémi (소미) : @FA A Vc03 az IPS Y tengely értékét nem tudja beolvasni ezért ideiglenesen kivettük a 2256 node pontra. Kérvényeztem a CS-től, hogy vizsgálják ki a problémát. May 28, 2025 at 10:17 PM, Szücs Géza FT-B : matrica csere nem segítene? May 28, 2025 at 10:19 PM, Noémi (소미) : @김지수PM(Gyuri)_FA 스티커 교체로 해결되지 않을까요? May 28, 2025 at 10:20 PM, 김지수PM(Gyuri)_FA : 곧 CS직원분께서 오셔서 확인 예정입니다. May 28, 2025 at 10:21 PM, Noémi (소미) : Hamarosan jön majd a CS-es kolléga és meg fogja nézni. May 28, 2025 at 10:35 PM, Csanálosi Gábor FA : @VK (mcs) pls check why MLA5749 not moving forward May 28, 2025 at 10:36 PM, VK (mcs) : Checking May 28, 2025 at 10:37 PM, VK (mcs) : It should be move now May 28, 2025 at 10:37 PM, Csanálosi Gábor FA : Thank you, gone May 28, 2025 at 10:42 PM, VK (mcs) : @Csanálosi Gábor FA Can you please ask about this issue from the @Manufacturing team. Is there any problem with carrier? It's there since 29th January. E0CNA52-M10 (7037) LTA0290. Thx May 28, 2025 at 10:43 PM, Csanálosi Gábor FA : On it May 28, 2025 at 10:43 PM, VK (mcs) : Thank you May 28, 2025 at 10:48 PM, Csanálosi Gábor FA : It has a yellow ticket on it, "hold part", reason: foil crease. According to SSL if we can send back to wh. (As NG), than send. May 28, 2025 at 10:50 PM, VK (mcs) : Thank you so much May 28, 2025 at 10:50 PM, Csanálosi Gábor FA : Most welcome May 28, 2025 at 10:58 PM, Nguyen Huy : @FA Please request AGV to take out materials from chamber 5-8 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you May 28, 2025 at 10:59 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA May 28, 2025 at 11:05 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Can I return to STK 72 warehouse? May 28, 2025 at 11:11 PM, Nguyen Huy : It's all reworked, pls transfer it to C72 warehouse, thank you May 28, 2025 at 11:52 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 20 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 122 • Cathode: 123 GF NC reel Available :- • AN: 287 • CA: 354 May 28, 2025 at 11:55 PM, Dariimaa/다리마/Ivancsa : @VK (mcs) Please check why MLA195 not moving forward May 28, 2025 at 11:57 PM, Csanálosi Gábor FA : 0195 May 28, 2025 at 11:57 PM, VK (mcs) : Done May 28, 2025 at 11:57 PM, VK (mcs) : It's moving now May 28, 2025 at 11:59 PM, Dariimaa/다리마/Ivancsa : Thank you! May 29, 2025 at 12:04 AM May 29, 2025 at 12:04 AM, 이한웅(삼구) : An VD 회수물류 확인 부탁드립니다. May 29, 2025 at 12:06 AM, Dariimaa/다리마/Ivancsa : Solved May 29, 2025 at 12:09 AM, Truong : NC Ca AGV #2 error please come check @FA May 29, 2025 at 12:34 AM, VK (mcs) : @Manufacturing Please check Circular conveyor C1CNV072 -M04 (16024) 1+4 carriers are waiting. May 29, 2025 at 12:43 AM, Truong : E0STKC51 -RTV-MCP error please come check @FA May 29, 2025 at 1:34 AM, 김지수PM(Gyuri)_FA : @이민재 GF순환물류 음극 M04에서 캐리어들 좀 빼주시면 감사하겠습니다! May 29, 2025 at 1:34 AM, 김지수PM(Gyuri)_FA : 4개 있습니다 May 29, 2025 at 1:35 AM, 이민재 : GF내려가면 바로 빼겠습니다 May 29, 2025 at 1:35 AM, 김지수PM(Gyuri)_FA : 넵 감사합니다. May 29, 2025 at 2:07 AM, 김지수PM(Gyuri)_FA : @manufacturing Please be careful not to make unloading request with full magazine in stacking station The same problem is happening and it causes cargo to become stuck on the conveyor, thanks in advance May 29, 2025 at 2:13 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) ST AN C1CNV072_P24 MLC4164 has not moved for a long time. Please check. Thank you! May 29, 2025 at 3:25 AM, VK (mcs) : @Csanálosi Gábor FA Can you please check Cathode reel conveyor A52-M07 (9034) Direction of port is output.and there is job for that port. Already asked manufacturing team but sadly no response. Thanks I advance May 29, 2025 at 3:26 AM, Csanálosi Gábor FA : @Böröcz Tamás pls May 29, 2025 at 3:55 AM, Böröcz Tamás : Impossible May 29, 2025 at 4:26 AM, Böröcz Tamás : I finally find out how to solve it May 29, 2025 at 4:28 AM, Böröcz Tamás : probably someone removed the carrier from the port so it was not sent back and did not switch to output mode May 29, 2025 at 4:36 AM, VK (mcs) : As I checked playback. Port went to out of service during transition. And after that port direction remained output. Thank you. May 29, 2025 at 4:49 AM, Debreczeni Ármin : @VK (mcs) please share lot quantity May 29, 2025 at 4:57 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 35 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 137 • Cathode: 130 GF NC reel Available :- • AN: 314 • CA: 397 May 29, 2025 at 5:23 AM, 김지수PM(Gyuri)_FA : @manufacturing Please take plates(MLA4079, MLC4133, MLA0073) out from the M04 <C1CNV072> May 29, 2025 at 5:59 AM, Nguyên : NC AN GF AGV#3 Error May 29, 2025 at 6:05 AM, Mohammad Amir : @FA Please check C1CNV071_12_017(Anode side) it is in Manual mode and hence OOS and because of this materials recovery has stopped and there is a traffic of materials on the recovery CNV. Thank you very much! May 29, 2025 at 6:07 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Brázik János Csepi Árpád ———————————— May 29, 2025 at 6:07 AM, Mohammad Amir : Good Morning @Vékony Ferenc Please check this issue. Thank you very much! May 29, 2025 at 6:15 AM, Zaya/ivancsa FA : solved May 29, 2025 at 6:16 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 6:22 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 37 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 121 • Cathode: 116 GF NC reel Available :- • AN: 321 • CA: 398 Thank you very much! May 29, 2025 at 6:47 AM, 김현태 : NC AN AGV #3 error. Thanks May 29, 2025 at 6:57 AM, 김현태 : This message was deleted. May 29, 2025 at 6:57 AM, 김현태 : NC CA AGV #8 error. Thanks May 29, 2025 at 7:21 AM, 김현태 : NC CA AGV #8 error. Thanks May 29, 2025 at 7:24 AM, Nguyên : 1/2 AN NC GF MGZ tray outlet is faulty. Please come and fix it for me. May 29, 2025 at 7:56 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check E0STKC51_P01 ,it is OOS that's why empty trays recovery on GF is not possible and there is queue of materials on CNVC52. Thank you very much! May 29, 2025 at 7:58 AM, Nguyên : NC AN GF AGV#4 Error May 29, 2025 at 8:05 AM, 인제(Hwang) : NC Ca Robot#3 Error May 29, 2025 at 8:10 AM, Nguyên : NC AN GF AGV#4 Error Unable to load empty MGZ tray into machine. Come check for me May 29, 2025 at 8:12 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_146 there is Data Loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 29, 2025 at 8:21 AM, Sazzad Bhai SKon : Hello @FA, Please check the following duplicated plates C1STKA72 (Shelf: 0205506, 0105201, 0100504, 0105002, 0100405) C1STKC72 (Shelf: 0200602, 0205601, 0205607, 0205603) please remove them from Manaul port and restock May 29, 2025 at 8:27 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 47 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 79 • Cathode: 88 GF NC reel Available :- • AN: 311 • CA: 372 Thank you very much! May 29, 2025 at 8:33 AM, Sazzad Bhai SKon : @FA Magazine MC5174 is duplicated. MLC2240 (C1STKC71, 0205403) MLC4208 (C1STKC72, 0205504) please remove any of the plates and confirm their magazines. 🙏 May 29, 2025 at 8:35 AM, Nguyên : VD AN GF 35(4-8) only put in 2 Palette. please check for me. Thank you May 29, 2025 at 8:35 AM, Mohammad Amir : Checking. May 29, 2025 at 8:37 AM, Mohammad Amir : There is an active LR as soon as materials will be available jobs will be created for remaining half chamber. Thank you very much! May 29, 2025 at 8:43 AM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKA71_C01 there is Travel first Movement Error. Thank you very much! May 29, 2025 at 8:53 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! May 29, 2025 at 9:01 AM, Mohammad Amir : @Zaya/ivancsa FA Please check NC CA AGV#7 it is in error and blocking AGV#1 which blocks AGV#9 and resulting delay in empty magazine delivery to NC CA 1-3. Thank you very much! May 29, 2025 at 9:05 AM, Sazzad Bhai SKon : E0STKC51_C01 is oos. @FA May 29, 2025 at 9:07 AM, Mohammad Amir : @Zaya/ivancsa FA Please check this issue empty magazine delivery is getting delayed. Thank you very much! May 29, 2025 at 9:16 AM, Barta Rudi : @Mohammad Amir Empty magazines are arriving very slowly on the cathode side. Please check it, thank you. May 29, 2025 at 9:18 AM, Mohammad Amir : @Barta Rudi Hello, Due to this issue you witnessed delay ,I already informed the FA team member to check the AGV which is blocking other AGVs way resulting in delay in empty magazine delivery. I am monitoring. Thank you very much! May 29, 2025 at 9:19 AM, Mohammad Amir : @Zaya/ivancsa FA Please also check AGV #1 NC CA it is not moving and blocking AGV#10,#8,#6,#5,#4#9. Resulting in empty magazine delivery delay. Thank you very much! May 29, 2025 at 9:21 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 now there are 1+4 carriers ,it is decreasing stacking materials delivery speed. Thank you very much! May 29, 2025 at 9:48 AM, Mohammad Amir : @FA @Vékony Ferenc Please check E0DTKC51_C01 there is Load Oversize error. Thank you very much! May 29, 2025 at 10:15 AM, Mohammad Amir : @FA Please check E0CNVA52_RTV1 , there is Unload start Dest, unload not busy time over ,Reels supply has been stopped. Thank you May 29, 2025 at 10:16 AM, Mohammad Amir : @Imre Please check this issue. Thank you very much! May 29, 2025 at 10:18 AM, Mohammad Amir : This message was deleted. May 29, 2025 at 10:24 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 52 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 93 • Cathode: 85 GF NC reel Available :- • AN: 314 • CA: 377 Thank you very much! May 29, 2025 at 10:49 AM, Nguyên : NC AN GF AGV#4 Error May 29, 2025 at 11:13 AM, Nguyên : NC AN GF AGV#4 Error May 29, 2025 at 11:15 AM, Nguyên : why is it losing money continuously. can you check and fix it for me? May 29, 2025 at 11:17 AM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check MLA4097 located at C1CNV072_P13; ,it is not moving and has blocked materials path. Everything is good from MCS RTD side ✅. Please check the issue physically on priority. Thank you very much! May 29, 2025 at 11:18 AM, Nguyên : NC AN GF AGV#6 Error May 29, 2025 at 11:21 AM, Barta Rudi : @FA The AGV placed two plate materials into VD CA 6-9 #54 at an angle. Please check it urgently!! May 29, 2025 at 11:21 AM, Barta Rudi : @FA CA Vd AGV7 stop, please check, thank you May 29, 2025 at 11:23 AM, Barta Rudi : @FA Vd Ca AGV 4 stop, please check, thank you!! May 29, 2025 at 11:24 AM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check this issue still exists. Thank you very much! May 29, 2025 at 11:26 AM, Ynja/ivancsa FA : Sorry, I didn’t work today. May 29, 2025 at 11:27 AM, Mohammad Amir : Okay ,I understand,Sorry for tagging you. Have a good rest. May 29, 2025 at 11:28 AM, Zaya/ivancsa FA : solved May 29, 2025 at 11:28 AM, Mohammad Amir : Thank you very much! May 29, 2025 at 11:28 AM, 김현태 : NC CA AGV #9 error. Thanks May 29, 2025 at 11:32 AM, Barta Rudi : @Mohammad Amir The AGV is not coming to pick up the finished magazines at NC Ca 6/2. Please check it, thank you! May 29, 2025 at 11:32 AM, Mohammad Amir : Checking May 29, 2025 at 11:35 AM, Mohammad Amir : AGV# 2 has been assigned to pick finished product from NC CA 6-2. ✅ Thank you very much! May 29, 2025 at 11:43 AM, 김현태 : NC CA AGV #8 error. Thanks May 29, 2025 at 11:43 AM, Nguyên : Pls request AGV come to chamber #48 AN for take out plate inside. We need to check chamber error. May 29, 2025 at 11:43 AM, 인제(Hwang) : 아니요 May 29, 2025 at 12:15 PM, Mohammad Amir : @Nguyên @Manufacturing Please check and confirm me is there any actual carriers exists in CA VD 5-7 P04. Thank you very much! May 29, 2025 at 12:16 PM, Zaya/ivancsa FA : @Mohammad Amir Hello Pls cancel job agv8 NC Ca , Fork 1 DOUBLE COUNT May 29, 2025 at 12:16 PM, Nguyên : Checking May 29, 2025 at 12:17 PM, Mohammad Amir : Working on it. May 29, 2025 at 12:18 PM, Mohammad Amir : Hello, I have cancelled the job successfully ✅. Please transfer it to the STK. Thank you very much! May 29, 2025 at 12:20 PM, Nguyên : AGV it only takes 3 Balette and leaves 1 Balette May 29, 2025 at 12:22 PM, Mohammad Amir : Thank you very much for the confirmation @Nguyên @Zaya/ivancsa FA , Please tranasfer manually MLC4216 located at C5VDC070_P04 to the warehouse as during Unload Request for P04 carrier id was reported NULL. Thank you very much! May 29, 2025 at 12:23 PM, Nguyên : Ok May 29, 2025 at 12:24 PM, Mohammad Amir : Could you please press LR for VD CA 4-5 P01/P02 as there is Half chamber situation. Thank you very much! May 29, 2025 at 12:30 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 55 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 78 • Cathode: 87 GF NC reel Available :- • AN: 323 • CA: 381 Thank you very much! May 29, 2025 at 12:43 PM, Nguyên : Pls request AGV come to chamber #48 AN for take out plate inside. We need to check chamber error. May 29, 2025 at 12:45 PM, Zaya/ivancsa FA : Pls wait, All agv busy thank u May 29, 2025 at 1:12 PM, 김현태 : NC CA AGV #6 error. Thanks May 29, 2025 at 1:37 PM, 김희래 : NC AN AGV#4 is stopped. There is no error. May 29, 2025 at 1:38 PM, 김희래 : It is nearby line#4. Please check. @FA May 29, 2025 at 1:45 PM, Barta Rudi : @FA NC Ca AGV 10 stop, please check, thank you May 29, 2025 at 1:51 PM, Mohammad Amir : @FA @Imre Please check E0STKA52_C01 there is Ready off during Forking error. Thank you very much! May 29, 2025 at 1:59 PM, Barta Rudi : . May 29, 2025 at 2:00 PM, Zaya/ivancsa FA : Robot error @Imre Pls check May 29, 2025 at 2:03 PM, Nguyên : 5/1 AN GF NC MGZ gateway error come fix it for me May 29, 2025 at 2:21 PM, Barta Rudi : @Mohammad Amir Ca 6/1 has been stopped due to magazine shortage since 13:49. Please check it. May 29, 2025 at 2:22 PM, Mohammad Amir : Checking May 29, 2025 at 2:22 PM, Sazzad Bhai SKon : No lot available May 29, 2025 at 2:23 PM, Sazzad Bhai SKon : GF VD available: Anode : 01 Cathode: 01 May 29, 2025 at 2:32 PM, Eduard SL Shift A : Line 6 ST4 AGV4 stopped May 29, 2025 at 2:40 PM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA please check this May 29, 2025 at 2:43 PM, Sazzad Bhai SKon : For notching 6 line, 2 AGV are coming now May 29, 2025 at 3:12 PM, Mohammad Amir : @FA @Imre Please check C1STKA72_C01 there is travel first movement error. Thank you! May 29, 2025 at 4:14 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 51 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 117 • Cathode: 80 GF NC reel Available :- • AN: 324 • CA: 393 Thank you very much! May 29, 2025 at 4:29 PM, 인제(Hwang) : NC An AGV#9 Please delete LR Job. 3Line does not use AGV May 29, 2025 at 4:29 PM, Mohammad Amir : Checking May 29, 2025 at 4:30 PM, Mohammad Amir : Job has been cancelled as requested ✅. Thank you very much! May 29, 2025 at 4:31 PM, 인제(Hwang) : Thank you! May 29, 2025 at 4:31 PM, Mohammad Amir : You are welcome! May 29, 2025 at 5:44 PM, Sazzad Bhai SKon : E0STKA51_C01 cranes are not moving for a long time. @FA please check May 29, 2025 at 5:53 PM, Böröczki Balázs : Coming. May 29, 2025 at 5:54 PM, Sazzad Bhai SKon : Crane activated now. 🙏 May 29, 2025 at 6:04 PM, 이한웅(삼구) : NC An #1 AGV 확인 부탁드립니다. May 29, 2025 at 6:05 PM, 이한웅(삼구) : 해당 AGV 풀매거진 가지고 있는데 멈춰서 동선 막고 있습니다. May 29, 2025 at 6:06 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take plates out from the M04(C1CNV072) 3 remains May 29, 2025 at 6:07 PM, Mohammad Amir : Good Evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 43 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 110 • Cathode: 85 GF NC reel Available :- • AN: 325 • CA: 399 Thank you very much! May 29, 2025 at 6:09 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.05.29. "B" műszak, 9+1/12+2 Tech, 1SL Overtime(0): Holiday(3+1): Denkó János, Rácz Dániel, 방혁_이반차 (Bang Hyuk) Sick(1): Takács Ádám Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Böröczki Balázs --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes --------------- Formation/Modul(2): Boromisza Zoltán, Gerbovits Kevin --------------- Support(1): 김지수 May 29, 2025 at 6:16 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1CNV072_16_144 there is Run time Over error and it has blocked stacking materials delivery. Please check the issue on priority,stacking production have been affected. Thank you very much! May 29, 2025 at 6:16 PM, Szücs Géza FT-B : @Böröczki Balázs llgyszives May 29, 2025 at 6:17 PM, Truong : NC CA agv #2 error please come check @FA May 29, 2025 at 6:17 PM, Szücs Géza FT-B : @fa samko pls May 29, 2025 at 6:18 PM, Böröczki Balázs : Solved. May 29, 2025 at 6:18 PM, Mohammad Amir : Thank you very much! May 29, 2025 at 6:21 PM, Betti B SL : L5 ST AGV #5 stopped at a crossroad turning error May 29, 2025 at 6:23 PM, 김지수PM(Gyuri)_FA : @Zaya/ivancsa FA please check C1CNV072 May 29, 2025 at 6:24 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1CNV072_16_144 there is Data Mismatch error now and it has blocked stacking materials delivery. Please check the issue on priority,stacking production have been affected. Thank you very much! May 29, 2025 at 6:28 PM, Truong : @fa May 29, 2025 at 6:28 PM, Dariimaa/다리마/Ivancsa : Solved May 29, 2025 at 6:29 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 now there are 1+6 carriers ,it is decreasing stacking materials delivery speed. Thank you very much! May 29, 2025 at 6:46 PM, 김지수PM(Gyuri)_FA : @manufacturing Please check MLC1033 on M04 outport, according to the data this carrier has full magazine plate(mc6342). If not please let me know or send it to C71. Thanks May 29, 2025 at 6:46 PM, 김지수PM(Gyuri)_FA : @이민재 May 29, 2025 at 6:48 PM, QuangPhan : This message was deleted. May 29, 2025 at 6:49 PM, 이민재 : 지금 1F 노칭에 있어서 GF 내려가면 확인 하겠습니다 May 29, 2025 at 6:59 PM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 now there are 1+6 carriers waiting. Cause delay. Thank you May 29, 2025 at 7:09 PM, Truong : Nc ca agv #8 error pls check @FA May 29, 2025 at 7:16 PM, 김지수PM(Gyuri)_FA : @manufacturing Please be careful not to make unloading request with full magazine in stacking station The same problem is happening and it causes cargo to become stuck on the conveyor, thanks in advance May 29, 2025 at 7:46 PM, Truong : Nc ca agv. #1 error please come check @fa May 29, 2025 at 7:58 PM, 이한웅(삼구) : please check NC Ca #3 Robot May 29, 2025 at 8:00 PM, Csanálosi Gábor FA : Coming May 29, 2025 at 8:33 PM, 원재 : NC Ca C1NCC030_P04 Please Check May 29, 2025 at 8:49 PM, Truong : Nc ca agv #8 error please come check May 29, 2025 at 8:56 PM, 이한웅(삼구) : Please check NC An #4 AGV May 29, 2025 at 9:01 PM, 이한웅(삼구) : #3 AGV same May 29, 2025 at 9:04 PM, 이한웅(삼구) : NC An 1라인 설비 동선 쪽에서 AGV 센서 에러 계속 발생하는거 같은데 확인 부탁드립니다. May 29, 2025 at 9:12 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please check and what agv number has this problem? May 29, 2025 at 9:13 PM, Truong : This message was deleted. May 29, 2025 at 9:15 PM, QuangPhan : Hello! @MCS Please check NC AN 1/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 29, 2025 at 9:17 PM, QuangPhan : Hello! @FA @AGV Problem continues on AGV #10. May 29, 2025 at 9:18 PM, Shakir (MCS) : AGV10 assigned, but under alarm. @Fa please check Thank you May 29, 2025 at 9:20 PM, Shakir (MCS) : @FA AGV10 Unassigned after that there is not assigning AGV. MCS reply is Okay. Thank you May 29, 2025 at 9:27 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 40 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 115 • Cathode: 86 GF NC reel Available :- • AN: 346 • CA: 401 Thank you May 29, 2025 at 9:27 PM, QuangPhan : Thank you for information May 29, 2025 at 9:28 PM, QuangPhan : Same for NC AN 2/3 May 29, 2025 at 9:33 PM, Shakir (MCS) : @FA Please check NC AN 2-3 UNK carrier at output port not assigning AGV, MCS reply is Okay. Thank you May 29, 2025 at 9:34 PM, Böröczki Balázs : Checking. May 29, 2025 at 9:38 PM, Lan Nhi : @FA Hello. Please refill the chamber for machine #32(4-5) VD/Ca. Thanks. May 29, 2025 at 9:40 PM, Shakir (MCS) : @FA @ACS Please tranasfer manually MLC3225 located at C5VDC070_P04 to the warehouse as during Unload Request for P04 carrier id was reported NULL. Thank you May 29, 2025 at 9:41 PM, Lan Nhi : @FA plz check for me. machine #43(5-7) VD/Shipping has been dried, but agv only took out 3 pallets. there is still 1 pallet not taken out yet May 29, 2025 at 9:42 PM, Shakir (MCS) : MLC3225 located at C5VDC070_P04 to the warehouse as during Unload Request for P04 carrier id was reported NULL. Carrier id read fail. Already requested @FA to transfer to STK. Thank you May 29, 2025 at 9:44 PM, Lan Nhi : Thanks May 29, 2025 at 10:02 PM, Böröczki Balázs : What should I do with it? Sorry, I'm a GF-beginner 🙂 May 29, 2025 at 10:09 PM, Shakir (MCS) : There is communication problem, Transfer carrier to gantry input port . Thank you May 29, 2025 at 10:11 PM, Shakir (MCS) : Currently all the agvs are busy May 29, 2025 at 10:14 PM, Csanálosi Gábor FA : Can you modify the unknown fir the actual carrier id? MA6405 May 29, 2025 at 10:14 PM, Csanálosi Gábor FA : For* May 29, 2025 at 10:18 PM, Shakir (MCS) : It will update ,carrier id read in gantry port. May 29, 2025 at 10:20 PM, 오세민(ST) : C1CNV072 tray data mismatch error Check please May 29, 2025 at 10:24 PM, 원재 : Nc Ca C5NCC030_P04 Error Check please May 29, 2025 at 10:33 PM, Dariimaa/다리마/Ivancsa : @Nandia FA @Amgaa FA May 29, 2025 at 10:35 PM, Csanálosi Gábor FA : Done May 29, 2025 at 10:39 PM, Dariimaa/다리마/Ivancsa : @Amgaa FA @Nandia FA May 29, 2025 at 10:57 PM, QuangPhan : Hello! @FA VD AN AGV #5 error. Thanks May 29, 2025 at 11:00 PM, Csanálosi Gábor FA : Done May 29, 2025 at 11:03 PM, Betti B SL : The AGV is not coming for the empty magazine at the Cathode Station in front of machine L6 ST #11. The operator indicated that he had called the AGV for it several times. It is in blue signal May 29, 2025 at 11:06 PM, Csanálosi Gábor FA : @Shakir (MCS) check it pls May 29, 2025 at 11:07 PM, Shakir (MCS) : There is No UR for C6STM110_P02 last UR completed at 18:36. Please press UR Thank you May 29, 2025 at 11:12 PM, QuangPhan : Hello! @MCS Please check NC AN 6/1 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 29, 2025 at 11:17 PM, Shakir (MCS) : For 6/1 AGV 09 has been assigned for P01 and AGV02 unloading for from P02 Thank you May 29, 2025 at 11:18 PM, Shakir (MCS) : Now pickup completed successfully May 29, 2025 at 11:20 PM, Shakir (MCS) : @Amgaa FA still one plate on VD CA, please transfer it to STK May 29, 2025 at 11:21 PM, QuangPhan : Thank you so much! May 29, 2025 at 11:25 PM, Shakir (MCS) : @FA C1STKC71_M01 there is Data mismatch error. Thank you May 29, 2025 at 11:26 PM, Csanálosi Gábor FA : Checking May 29, 2025 at 11:29 PM, Csanálosi Gábor FA : Solved by @이민재 May 29, 2025 at 11:42 PM, Amgaa FA : solved. There were many errors and it took a long time to resolve. Sorry. May 29, 2025 at 11:42 PM, Shakir (MCS) : Thank you May 29, 2025 at 11:43 PM, Shakir (MCS) : @FA C1STKA71_M01 there is Data mismatch error. Thank you May 29, 2025 at 11:52 PM, 이민재 : Done May 30, 2025 at 12:14 AM May 30, 2025 at 12:14 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 40 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 113 • Cathode: 88 GF NC reel Available :- • AN: 339 • CA: 375 Thank you May 30, 2025 at 12:18 AM, Truong : NC CA agv #2 eror please come check May 30, 2025 at 12:27 AM, Truong : @FA May 30, 2025 at 12:28 AM, Dariimaa/다리마/Ivancsa : @Nandia FA @Amgaa FA May 30, 2025 at 12:28 AM, Böröczki Balázs : This message was deleted. May 30, 2025 at 12:39 AM, 이한웅(삼구) : please check NC An #2 AGV May 30, 2025 at 12:45 AM, Amgaa FA : Checked and working normally. May 30, 2025 at 12:56 AM, Shakir (MCS) : @FA @Böröczki Balázs Please check C1STKA71_P22 is OOS, carriers are waiting on CNV. Thank you May 30, 2025 at 12:59 AM, Böröczki Balázs : Ok May 30, 2025 at 1:04 AM, Shakir (MCS) : @FA Please check E0CNVA52_07_046/012 there is Run Time over error. Thank you May 30, 2025 at 1:05 AM, 김지수PM(Gyuri)_FA : @FA please check E0CNVA52 > data mismatch error May 30, 2025 at 1:10 AM, QuangPhan : Hello! @Shakir (MCS) Could you please check NC AN 1/1 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 30, 2025 at 1:14 AM, Shakir (MCS) : All agvs are busy now, MCS reply is okay. Thank you May 30, 2025 at 1:16 AM, 김태헌 : ST conveyer p01 AGV fork ld/ud req not recieve error Five Agv's on hold please check May 30, 2025 at 1:16 AM, Böröczki Balázs : Checking. May 30, 2025 at 1:17 AM, QuangPhan : Hello! @FA Nc AN AGV #6 error. Thanks May 30, 2025 at 1:17 AM, 김지수PM(Gyuri)_FA : MLC3043 해당 캐리어 바코드스캐너 존 통과하면, AGV가 화물 내려놓을겁니다. May 30, 2025 at 1:21 AM, Amgaa FA : solved May 30, 2025 at 1:23 AM, Amgaa FA : This message was deleted. May 30, 2025 at 1:23 AM, Amgaa FA : solved May 30, 2025 at 1:39 AM, Truong : NC Ca agv #10 error please come check May 30, 2025 at 1:40 AM, Csanálosi Gábor FA : @Shakir (MCS) the agv is trying to unload to occupied port, can you send it somewhere else? May 30, 2025 at 1:43 AM, Csanálosi Gábor FA : Solved May 30, 2025 at 1:44 AM, Shakir (MCS) : Should I delete the job there is job for NC 1-3 pick material. May 30, 2025 at 1:45 AM, Shakir (MCS) : AGV10 assigned for this task May 30, 2025 at 1:47 AM, Csanálosi Gábor FA : I deleted its unloadig job on that port , so it could move away, i dont know since then May 30, 2025 at 1:48 AM, Csanálosi Gábor FA : Wait, i missed. I worked on ST Ca agv 10 May 30, 2025 at 1:49 AM, Shakir (MCS) : AGV10 NC Ca working normally May 30, 2025 at 1:50 AM, Csanálosi Gábor FA : Yup, i successfully reseted remotely May 30, 2025 at 1:51 AM, Csanálosi Gábor FA : And now stopped at same port. Going there to check May 30, 2025 at 1:56 AM, Shakir (MCS) : Also please check the mgz MA1370 at NC AN 1-1 _P01 AGV not assigning. All good from MCS side. Thank you May 30, 2025 at 1:59 AM, Csanálosi Gábor FA : That magazine is the 6. In the line, and present May 30, 2025 at 2:08 AM, Amgaa FA : solved, working normally right now May 30, 2025 at 2:09 AM, Shakir (MCS) : @Csanálosi Gábor FA Please check E0CNVC52_RTV_01 is not moving. Thank you May 30, 2025 at 2:10 AM, Csanálosi Gábor FA : You reading my mind, already heading there May 30, 2025 at 2:12 AM, Csanálosi Gábor FA : Solved May 30, 2025 at 2:16 AM, Csanálosi Gábor FA : In mcs i see e0cnvc52 in red can you do something? May 30, 2025 at 2:21 AM, Csanálosi Gábor FA : Its green again thx May 30, 2025 at 2:30 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 07 • Cathode: 43 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 135 • Cathode: 97 GF NC reel Available :- • AN: 356 • CA: 369 Thank you May 30, 2025 at 2:39 AM, 이한웅(삼구) : please check NC An #4 AGV May 30, 2025 at 2:42 AM, Truong : NC CA robot#3 error @FA May 30, 2025 at 2:43 AM, Csanálosi Gábor FA : Coming May 30, 2025 at 2:47 AM, Csanálosi Gábor FA : Done May 30, 2025 at 2:48 AM, Csanálosi Gábor FA : Done May 30, 2025 at 3:04 AM, Shakir (MCS) : Hello Sir @KIM SEYEON [김세연]_FA @김지수PM(Gyuri)_FA Details regarding the issue in VD CA 5-7 Chamber. Problem: AGV only take out 3 plates instead of 4, the top/right plate P04, remain inside the chamber. The issue happening because of carrier id read fail. All 3 plates carrier id read was successful except P04 port, Return message is carrierid is null with result code 2. C5VDC070, Event Time 05/29 : 21:08 05/29 : 11:53 05/28 : 17:03 05/28 : 03:18 05/27 : 19:53 05/27 : 11:01 As a result, o May 30, 2025 at 3:08 AM, KIM SEYEON [김세연]_FA : @Shakir (MCS) please share me exact location of p04? May 30, 2025 at 3:12 AM, QuangPhan : Hello! @FA NC AN 2/3 AGV #4 error. Thanks May 30, 2025 at 3:12 AM, Shakir (MCS) : The Location of P04 is Down May 30, 2025 at 3:14 AM, Shakir (MCS) : AGV took P03 - UP and P04 Down May 30, 2025 at 3:14 AM, KIM SEYEON [김세연]_FA : please share me full name of the port ex) E0STKC51 p4 etc... May 30, 2025 at 3:14 AM, KIM SEYEON [김세연]_FA : vd machine itself? May 30, 2025 at 3:14 AM, Shakir (MCS) : C5VDC070_P04 May 30, 2025 at 3:15 AM, KIM SEYEON [김세연]_FA : okay May 30, 2025 at 3:16 AM, 김태헌 : ST ST Conveyer P01 AGV Error please check. May 30, 2025 at 3:16 AM, KIM SEYEON [김세연]_FA : @이한웅(삼구) 조장님 VD 5-7 설비 P04 점검 부탁드립니다. 계속 싱글챔버 발생하는데, 우선 점검하실분 없으면 해당설비 비가동했다가 내일 점검후 가동 부탁드립니다. 이런 ABNORMAL CASE 계속되면 VD 미건조가 우려됩니ㅏ. May 30, 2025 at 3:18 AM, KIM SEYEON [김세연]_FA : @Nandia FA please check May 30, 2025 at 3:18 AM, 이한웅(삼구) : 양극인가요 음극인가요? May 30, 2025 at 3:18 AM, KIM SEYEON [김세연]_FA : 양극입니다 May 30, 2025 at 3:19 AM, KIM SEYEON [김세연]_FA : 센서감지 IO도 봐주시면 될것 같습니다. May 30, 2025 at 3:19 AM, 이한웅(삼구) : 네 알겠습니다. May 30, 2025 at 3:32 AM, 김태헌 : This message was deleted. May 30, 2025 at 3:32 AM, 김태헌 : ST ST Conveyer P01 AGV Error please check. May 30, 2025 at 3:33 AM, 김태헌 : ST ST Conveyer P06 AGV Error please check. May 30, 2025 at 3:48 AM, Debreczeni Ármin : On line 4 agv's are didnt take the empty magazines and bring full ones. Is there any problem? May 30, 2025 at 3:49 AM, Shakir (MCS) : Ca or An? May 30, 2025 at 3:59 AM, 김지수PM(Gyuri)_FA : @Dariimaa/다리마/Ivancsa could you please check the 5-7 CA vd chamber? Is there someone in there? May 30, 2025 at 4:00 AM, 이한웅(삼구) : 센서 문제 확인되어 설비 점검 진행하겠습니다. 감사합니다. May 30, 2025 at 4:01 AM, Dariimaa/다리마/Ivancsa : @Amgaa FA @Nandia FA May 30, 2025 at 4:02 AM, 김지수PM(Gyuri)_FA : Sorry, someone already checked! Thanks May 30, 2025 at 4:03 AM, Debreczeni Ármin : Sorry stacking May 30, 2025 at 4:06 AM, Shakir (MCS) : This message was deleted. May 30, 2025 at 4:06 AM, Shakir (MCS) : AGV already took plates on the way to STK. May 30, 2025 at 4:07 AM, Debreczeni Ármin : Okay thanks! May 30, 2025 at 4:07 AM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity thank you! May 30, 2025 at 4:10 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 54 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 121 • Cathode: 84 GF NC reel Available :- • AN: 368 • CA: 365 Thank you May 30, 2025 at 5:16 AM, 이한웅(삼구) : please check NC Ca #8 AGV May 30, 2025 at 5:17 AM, Csanálosi Gábor FA : Coming May 30, 2025 at 5:23 AM, QuangPhan : Hello! @Shakir (MCS) Could you please check NC AN 1/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 30, 2025 at 5:23 AM, Csanálosi Gábor FA : Done May 30, 2025 at 5:29 AM, Shakir (MCS) : AGV04 has been assigned for 1/2, AGV has problem. @FA please check AGV04 not picking msg. May 30, 2025 at 5:30 AM, Shakir (MCS) : AGV 04 under alarm May 30, 2025 at 5:31 AM, QuangPhan : AGV #4 has arrived and error again. it happened 4 times the same. please check it May 30, 2025 at 5:37 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 19 • Cathode: 72 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 110 • Cathode: 87 GF NC reel Available :- • AN: 366 • CA: 368 Thank you May 30, 2025 at 5:57 AM, Simon Dávid D SL NC : @FA hello CA 1/1 magazin lift error ,megnéznétek köszönöm May 30, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:10/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (2): Martina Dávid, Kiss Balázs Shift change(0): Elektróda:(2) Oláh András, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 30, 2025 at 6:03 AM, Simon Dávid D SL NC : @FA hello CA NC #2 robot error ,megnéznétek köszönöm May 30, 2025 at 6:03 AM, Dániel Hufnágel : Már uton May 30, 2025 at 6:18 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.30 Time:06:00~18:00 Jeong woojun Assy GF 오은향 (OH Eunhyang) May 30, 2025 at 6:26 AM, Jun(정우준)_SKOH FA : @mcs Could you please check why LR is not generated in C1CNV072_P07, P08? May 30, 2025 at 6:30 AM, duzzaman Md (MCS) : There are active job for both the ports May 30, 2025 at 6:45 AM, Ivan Chobitko : Good morning! @mcs Please increase AN/CA delivery material for L6, we are almost empty For at least the next half hour May 30, 2025 at 6:45 AM, duzzaman Md (MCS) : Good morning. Checking May 30, 2025 at 6:48 AM, duzzaman Md (MCS) : As we see, there are two jobs. One is at the vehicle and another in CNV072_p12 Increasing priorities May 30, 2025 at 6:49 AM, Ivan Chobitko : Thank you so much May 30, 2025 at 7:12 AM, Jun(정우준)_SKOH FA : ST 6-6라인에서 일부 전극 남은상태로 UR 요청했는데, 재발 되지 교육 한번 부탁드립니다. May 30, 2025 at 7:18 AM, 김지수PM(Gyuri)_FA : @Ivan Chobitko @manufacturing Please be careful not to make unloading request with full magazine in stacking station The same problem is happening and it causes cargo to become stuck on the conveyor, thanks in advance May 30, 2025 at 7:29 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 73 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 81 • Cathode: 46 GF NC reel Available :- • AN: 363 • CA: 344 Thank you May 30, 2025 at 8:27 AM, Sazzad Bhai SKon : Hello @FA, Please check the following duplicated plates C1STKA72 (Shelf: 0205506, 0105201, 0100504, 0105002, 0100405) C1STKC72 (Shelf: 0200602, 0205601, 0205607, 0205603) please remove them from Manaul port and restock May 30, 2025 at 8:29 AM, Sazzad Bhai SKon : @FA Magazine MC5174 is duplicated. MLC2240 (C1STKC71, 0205403) MLC4208 (C1STKC72, 0205504) please remove any of the plates and confirm their magazines. 🙏 May 30, 2025 at 8:34 AM, 카스텔 발라지 F.A. : We'll check them as soon as we have time. May 30, 2025 at 8:38 AM, Ynja/ivancsa FA : @duzzaman Md (MCS) Please check 4-5 EQ in VD CA half May 30, 2025 at 8:42 AM, duzzaman Md (MCS) : LR received, unfortunately no materials available May 30, 2025 at 8:45 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 79 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 78 • Cathode: 37 GF NC reel Available :- • AN: 368 • CA: 332 Thank you May 30, 2025 at 9:00 AM, Sazzad Bhai SKon : @김주연 Hello pm, In notching GF, some Manual ports ( Example, E0CNVC52_M07) are set as IN port. So material delivery is being delayed. May 30, 2025 at 9:06 AM, 김주연 : @Lee Junghan(이정한)_CS 매니저님, 양극 rtv 출고포트 m07 포트 방향 바꾸는 방법이 어떻게 되나요 May 30, 2025 at 9:15 AM, Lee Junghan(이정한)_CS : 확인해보겠습니다. May 30, 2025 at 9:23 AM, Sazzad Bhai SKon : Excuse me, same for E0CNVA52_M02, this port direction should be OUT. May 30, 2025 at 9:32 AM, Lee Junghan(이정한)_CS : 일단 포트를 매뉴얼 상태로 바꾸고, 리셋후 in/out 3초간 누르면됩니다. 자세한 내용은 문진영M 매니저가 확인후 알려준다고하니 공유 드리겠습니다. May 30, 2025 at 9:58 AM, Toponary Csaba : @Sazzad Bhai SKon Hello! We have to take out 4 reels on GF, but I search for them in the RTD but it doesn't give any results. Can you help? The reels are: EA4M073F5203512A,B EA4M073F5203513A,B May 30, 2025 at 10:05 AM, Péti Gábor : @안진모 An Jin Mo May 30, 2025 at 10:12 AM, Sazzad Bhai SKon : EA4***512B was rack out from E0STKA51_M01 on 15th May 2:41, Checking for others May 30, 2025 at 10:15 AM, Sazzad Bhai SKon : EA4***512A was rack out from E0STKA51_M05 on 15th May 4:12, Checking for others May 30, 2025 at 10:15 AM, duzzaman Md (MCS) : EA4***513B was rack out from E0STKA51_M01 on 15th May 2:23 EA4***513A was rack out from E0STKA51_M02 on 14th May 22:54 May 30, 2025 at 10:16 AM, Toponary Csaba : Thank you very much May 30, 2025 at 10:53 AM, Simon Dávid D SL NC : @FA hello FA TC kellene nekem a NC AN 3/1-re,Köszönöm May 30, 2025 at 11:05 AM, Ynja/ivancsa FA : @duzzaman Md (MCS) Please delete job a AGV#05 and AGV#04 in VD AN 4-5 EQ is not working May 30, 2025 at 11:07 AM, duzzaman Md (MCS) : Done May 30, 2025 at 11:07 AM, Simon Dávid D SL NC : @FA hello NC AN 3/1 ,lift emelés error,megnáznétek köszönöm May 30, 2025 at 11:11 AM, 카스텔 발라지 F.A. : Pillanat és megyek May 30, 2025 at 11:17 AM, Novák Károly F. A. : Kész May 30, 2025 at 11:17 AM, duzzaman Md (MCS) : @FA PLEASE CHECK LIGHT CURTAIN ERROR AT C1STKA72_P07/08/09 May 30, 2025 at 11:26 AM, Novák Károly F. A. : We are testing these ports. We're almost done May 30, 2025 at 11:29 AM, Novák Károly F. A. : The ports are working again. May 30, 2025 at 11:53 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 88 Pre STK > VD • Anode: 29 • Cathode: 00 Post STK > Stacking • Anode: 36 • Cathode: 34 GF NC reel Available :- • AN: 381 • CA: 324 Thank you May 30, 2025 at 11:59 AM, 이도형 (Lee) : @FA NC CA #8 AGV ERROR. Please check. May 30, 2025 at 12:02 PM, 이도형 (Lee) : @FA NC CA #5 AGV ERROR. Please check. May 30, 2025 at 1:21 PM, Lee Junghan(이정한)_CS : 제어쪽에서 답변 받은 결과로는 현장에서 MODE 변경할경우, 1.포트는 매뉴얼 상태 2.화물이 포트에 없어야하고 3.IN->OUT 으로만 MODE 변경가능 으로 설정 되어 있다고 합니다. May 30, 2025 at 1:22 PM, duzzaman Md (MCS) : @FA PLEASE CHECK C1CNV072_16_144 Data missmatch error May 30, 2025 at 1:26 PM, 이도형 (Lee) : @FA NC CA #8 AGV ERROR. Please check. May 30, 2025 at 1:27 PM, 이도형 (Lee) : Keep stopping at the same place May 30, 2025 at 1:57 PM, 정은탁 (Jung EunTak) : @FA NC Ca 6-3 AGV#10 UR Error. Please Check. May 30, 2025 at 2:34 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 100 Pre STK > VD • Anode: 46 • Cathode: 02 Post STK > Stacking • Anode: 25 • Cathode: 41 GF NC reel Available :- • AN: 403 • CA: 319 Thank you May 30, 2025 at 2:38 PM, 카스텔 발라지 F.A. : @duzzaman Md (MCS) hello! Please delete 1F VD AN #5 AGV's job. It need some maintenance May 30, 2025 at 2:38 PM, 카스텔 발라지 F.A. : CA May 30, 2025 at 2:38 PM, 카스텔 발라지 F.A. : * May 30, 2025 at 2:38 PM, 카스텔 발라지 F.A. : Sorry May 30, 2025 at 2:39 PM, duzzaman Md (MCS) : In CA side, AGV 5 do not have any jo May 30, 2025 at 2:40 PM, Ynja/ivancsa FA : This message was deleted. May 30, 2025 at 2:41 PM, duzzaman Md (MCS) : The same . No job for AGV 5, CA side May 30, 2025 at 2:41 PM, duzzaman Md (MCS) : Could you tell me the source machine ? May 30, 2025 at 2:44 PM, Sazzad Bhai SKon : This AGV doesn't have a job but it's trying to get a job. We see several jobs have been assigned and unassigned May 30, 2025 at 2:50 PM, Sazzad Bhai SKon : @FA C1STKC71_C01 is oos. Hoist rls error. May 30, 2025 at 3:53 PM, 최정한.KOVA : This message was deleted. May 30, 2025 at 3:54 PM, 최정한.KOVA : VD AN4-3 챔버내 매거진 수동반송해주세요. May 30, 2025 at 3:58 PM, 이도형 (Lee) : @FA Please manually return the magazine in the VD AN4-3 chamber. May 30, 2025 at 4:38 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 105 Pre STK > VD • Anode: 48 • Cathode: 02 Post STK > Stacking • Anode:31 • Cathode: 29 GF NC reel Available :- • AN: 400 • CA: 325 Thank you May 30, 2025 at 4:46 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello NC CA 5/1 -re nem jönn üres mgz ,megnéznéd köszönöm May 30, 2025 at 4:48 PM, duzzaman Md (MCS) : No lot available May 30, 2025 at 4:52 PM, duzzaman Md (MCS) : @FA C1STKC71 P19 port is OOS Please check May 30, 2025 at 5:12 PM, 은향(OH EUN HYANG) : @Sazzad Bhai SKon Put it in the negative VD 2-5 cargo hold. Thank you May 30, 2025 at 5:19 PM, duzzaman Md (MCS) : LR was successful . But There is no active job. May 30, 2025 at 5:20 PM, duzzaman Md (MCS) : P04 is OOS May 30, 2025 at 5:29 PM, 은향(OH EUN HYANG) : @mcs Please check 2-5 in VD AN Half chamber May 30, 2025 at 5:32 PM, Sazzad Bhai SKon : Yes, because the port status is oos in RTD, we're investigating May 30, 2025 at 5:49 PM, duzzaman Md (MCS) : Job created. May 30, 2025 at 6:05 PM, FACS_SEOUNGMIN SON left this chatroom. May 30, 2025 at 6:12 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.30 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 30, 2025 at 6:34 PM, 이한웅(삼구) : NC An 1-2 아웃포트 벨트 이탈 확인 부탁드립니다. @Baek Hojong(백호종)FA May 30, 2025 at 7:24 PM, Kateryna SSL C : Hello everyone! @fa L1 agv#10 stopped near ST 1/3 Check please May 30, 2025 at 7:31 PM, Shakir (MCS) : @FA Please check C1STKC71_P20/19 there is Light curtain error. Thank you May 30, 2025 at 7:41 PM, QuangPhan : Hello! Have a nice day! @Shakir (MCS) Could you please check RTV - NC AN line 1. We didn’t recieved material for a while. Thank you so much! May 30, 2025 at 7:53 PM, Shakir (MCS) : RTV is moving normally, May 30, 2025 at 8:40 PM, Shakir (MCS) : @FA Please check E0CNVA52_07_009 Data mismatch error. Thank you May 30, 2025 at 8:45 PM, QuangPhan : Hello! @Shakir (MCS) Could you please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 30, 2025 at 8:45 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 98 Pre STK > VD • Anode: 77 • Cathode: 02 Post STK > Stacking • Anode:00 • Cathode: 00 GF NC reel Available :- • AN: 381 • CA: 315 Thank you May 30, 2025 at 8:49 PM, Shakir (MCS) : This message was deleted. May 30, 2025 at 8:50 PM, Shakir (MCS) : Currently NC AN AGVs are busy May 30, 2025 at 9:22 PM, T. Gàbornè C SL NC : @FA Please check CA side AGV #7 Thank you. May 30, 2025 at 10:21 PM, T. Gàbornè C SL NC : @FA Please check CA AGV #10 Take out problem. Thank you. May 30, 2025 at 10:27 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 93 Pre STK > VD • Anode: 95 • Cathode: 02 Post STK > Stacking • Anode:02 • Cathode: 22 GF NC reel Available :- • AN: 391 • CA: 318 Thank you May 30, 2025 at 10:41 PM, Shakir (MCS) : @FA Please check C1STKA71_P16/15 there is Light curtain error. Thank you May 30, 2025 at 11:02 PM, Shakir (MCS) : @FA Please check C1STKC71_P16/15 there is Light curtain error. Thank you May 30, 2025 at 11:04 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV_01 is OOS. Thank you May 30, 2025 at 11:06 PM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 now there are 1+8 carriers waiting. Cause delay. Thank you May 30, 2025 at 11:28 PM, Shakir (MCS) : @FA @Kertész Dániel Please check there is no job for MLC3061 at C1CNV072_16_093 not moving, send it to manual port. It. Causing traffic on CNV. Thank you May 30, 2025 at 11:36 PM, 이한웅(삼구) : @Baek Hojong(백호종)FA 안녕하세요. NC Ca 창고에 매거진은 많은데 매거진 순환이 느립니다. 1~4라인 사이에서 AGV 센서 에러가 많은거 같은데 확인 부탁드립니다. AGV 5대 밀려있습니다. May 30, 2025 at 11:37 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 96 Pre STK > VD • Anode: 100 • Cathode: 03 Post STK > Stacking • Anode:00 • Cathode: 45 GF NC reel Available :- • AN: 390 • CA: 318 Thank you May 30, 2025 at 11:38 PM, T. Gàbornè C SL NC : @FA Please check GF CA AGV #8 Thanks May 30, 2025 at 11:45 PM, Olena Katerynchuk : Hello everyone! @fa L1 agv#10 stopped near ST #19 Check please May 31, 2025 at 12:30 AM May 31, 2025 at 12:30 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 92 Pre STK > VD • Anode: 108 • Cathode: 02 Post STK > Stacking • Anode:00 • Cathode: 46 GF NC reel Available :- • AN: 397 • CA: 316 Thank you May 31, 2025 at 12:34 AM, Shakir (MCS) : @FA C1STKA71_P16_OP01 there is Data mismatch error. Thank you May 31, 2025 at 12:37 AM, T. Gàbornè C SL NC : @FA Please check CA robot #3 BCR position error Thank you. May 31, 2025 at 1:03 AM, T. Gàbornè C SL NC : @FA Please check GF CA AGV #4 Thanks May 31, 2025 at 1:10 AM, 원재 : @FA Please check NC Ca AGV#2 May 31, 2025 at 1:15 AM, Amgaa FA : 4 and 7 AGVs are showing errors when they go to the port full of materials. Please check. thnks May 31, 2025 at 1:56 AM, Khaliun/Ivancsa FA : @MCS ST AN, there is material on line 1 C1STM190_02, but AGV#4 is currently downloading material, please check it out. Thank you. May 31, 2025 at 2:00 AM, Shakir (MCS) : I will delete the job please send it to input port CNV. May 31, 2025 at 2:01 AM, Shakir (MCS) : Which carrier on machine? May 31, 2025 at 2:02 AM, Shakir (MCS) : As I see in MCS the port P02 is emty but in ACS it is occupied by MLA6002. May 31, 2025 at 2:06 AM, Khaliun/Ivancsa FA : Yes May 31, 2025 at 2:07 AM, Khaliun/Ivancsa FA : there is material there May 31, 2025 at 2:07 AM, Shakir (MCS) : Which carrier? May 31, 2025 at 2:09 AM, Khaliun/Ivancsa FA : C1STM190_02 - There is material MLA1488 May 31, 2025 at 2:14 AM, Shakir (MCS) : Job has been terminated for this carrier May 31, 2025 at 2:22 AM, 이한웅(삼구) : please check NC An #5 AGV May 31, 2025 at 2:34 AM, Olena Katerynchuk : Hello everyone! @fa L1 agv#10 stopped near ST #12 Check please May 31, 2025 at 2:36 AM, QuangPhan : Hello! @Shakir (MCS) Could you please check NC AN 6/1 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 31, 2025 at 2:44 AM, Shakir (MCS) : Job exists for 6/1 P01 but all agvs are busy right now. For 6/1 P02 job terminated by OP, Please press UR again. Thank you May 31, 2025 at 2:54 AM, 원재 : @FA Please NC Ca 2-2 May 31, 2025 at 3:00 AM, 김태헌 : ST Conveyer CV010 tray data mismatch error please check. May 31, 2025 at 3:12 AM, T. Gàbornè C SL NC : @Fa Please check AN Robot #1 MGZ BCR Comp error Thank you May 31, 2025 at 3:14 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 06 • Cathode: 105 Pre STK > VD • Anode: 91 • Cathode: 00 Post STK > Stacking • Anode:00 • Cathode: 42 GF NC reel Available :- • AN: 411 • CA: 314 Thank you May 31, 2025 at 3:21 AM, QuangPhan : Hello! @FA There was a mgz flip problem on the outline area. Please come NC AN 5/1 check it. May 31, 2025 at 3:30 AM, 이한웅(삼구) : - 자동화 아웃 포트 매거진 전도 발생으로 인한 전극 Side 깨짐 MA6467 1Mgz 폐기 하겠습니다. May 31, 2025 at 3:30 AM, 이한웅(삼구) : @Baek Hojong(백호종)FA May 31, 2025 at 3:31 AM, Baek Hojong(백호종)FA : 조장님 호기가 어디죠? May 31, 2025 at 3:32 AM, 이한웅(삼구) : An 5-1 입니다. May 31, 2025 at 3:34 AM, Shakir (MCS) : @FA Please check C1STKC72_P21, Run time over error. Thank you May 31, 2025 at 3:52 AM, QuangPhan : Hello! @FA NC AN 1/3 AGV #4 error. Thanks May 31, 2025 at 4:24 AM, QuangPhan : Hello! @FA @AGV VD AN 4_6 #33 has been completed on VD. but AGV did not perform the pick-up action. please check it. Thank you so much! May 31, 2025 at 4:55 AM, QuangPhan : Hello! @FA NC AN 4/ AGV #6 error. Thanks May 31, 2025 at 5:12 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 102 Pre STK > VD • Anode: 71 • Cathode: 03 Post STK > Stacking • Anode:00 • Cathode: 37 GF NC reel Available :- • AN: 424 • CA: 321 Thank you May 31, 2025 at 5:16 AM, QuangPhan : Hello! @Shakir (MCS) Could you please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! May 31, 2025 at 5:18 AM, T. Gàbornè C SL NC : @FA Please check Ca Robot #3 Data mismatch error Thanks May 31, 2025 at 5:19 AM, Shakir (MCS) : Hello, For 2/2, job exists but all the AGVs are busy right now. Thank you May 31, 2025 at 5:20 AM, Shakir (MCS) : @FA @ACS Please check AGV10 idle , NC AN Thank you May 31, 2025 at 5:37 AM, Dima Kusyk : @fa Hello everyone! Someone please come to line 4/STK20, I need your help May 31, 2025 at 5:43 AM, Shakir (MCS) : @FA Please check C1CNV071_12_020 , Run time over error. Thank you May 31, 2025 at 5:56 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs May 31, 2025 at 6:18 AM, KollerCsaba 처버 Чобо : Sziasztok, L4 stacking 19 gépnél a stand sárgán világít nem lehet rá anyagot kérni (anód) megnéznétek? Köszönöm May 31, 2025 at 6:41 AM, Dániel Hufnágel : @Shakir (MCS) Good morning! Can you check me why anod magazines standing in A71 storage? They have MES status problem or there are any other reason? May 31, 2025 at 6:42 AM, Mohammad Amir : Good morning, Checking. May 31, 2025 at 6:45 AM, Mohammad Amir : Hello, As I checked, There is currently 15 empty magazine available which can be transferred from RTD side. And as soon as empty Magazine arrives at Gantry O/P ports jobs are getting created for Notching ,I didn't find any abnormalities in it. Please let me know if you need any further assistance. Thank you very much! May 31, 2025 at 6:48 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 101 Pre STK > VD • Anode: 96 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 26 GF NC reel Available :- • AN: 419 • CA: 318 Thank you very much! May 31, 2025 at 6:52 AM, Mohammad Amir : Plus three magazines are not available for transfer because of magazine lot count is less than 6 and due to ban shelf plate. Thank you very much! May 31, 2025 at 6:54 AM, Dániel Hufnágel : Can you share please which plates are this or location? Thank you May 31, 2025 at 6:54 AM, Mohammad Amir : Okay ,I am checking. May 31, 2025 at 7:01 AM, Mohammad Amir : Here is the Required Details:- Fist plate :- MLA0077 (C1STKA71,0204901) Second plate :- MLA4028(C1STKA71,0104901) Third Plate :- MLA2075(C1STKA71,0204502) Thank you very much! May 31, 2025 at 7:04 AM, Jun(정우준)_SKOH FA : dayshift FA Date: 2025.05.31 Time:06:00~18:00 Jeong woojun Assy GF 오은향 (OH Eunhyang) May 31, 2025 at 7:22 AM, 이도형 (Lee) : @FA NC An #6 AGV ERROR. Please check. May 31, 2025 at 7:24 AM, Dániel Hufnágel : @Mohammad Amir Can you check me please Anode side notching AGV#4? Its has material without order. May 31, 2025 at 7:24 AM, Mohammad Amir : Sure, Checking May 31, 2025 at 7:26 AM, Mohammad Amir : It has no order because previous order was cancelled by operator at 5:22. Please send it back to STK. Thank you very much! May 31, 2025 at 7:28 AM, Simon Dávid D SL NC : @FA hello NC CA 2/1 bemeneti conveyornál egy mgz fére csúszot,megnéznétek köszönöm May 31, 2025 at 8:48 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 102 Pre STK > VD • Anode: 131 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 05 GF NC reel Available :- • AN: 416 • CA: 315 Thank you very much! May 31, 2025 at 8:53 AM, Dániel Hufnágel : @Péti Gábor May 31, 2025 at 9:02 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_16_146 there is Run time Over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! May 31, 2025 at 10:11 AM, 김희래 : @FA Please change port direction E0CNVC51_M07. There is no tray so its direction should be changed to output(now input mode). May 31, 2025 at 10:25 AM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check MLC0151 it has job to go to C1CNV072_P07 . However it is not progressing for while because we are receiving SCS error that "16037(C1STKC72) ,there is an order in progress on this port ." Please check this port 16037. Job is getting delayed for quite a long time. Thank you very much! May 31, 2025 at 10:37 AM, Simon Dávid D SL NC : @FA hello #7 AGV Error NC CA megnéznétek ,köszönöm May 31, 2025 at 10:37 AM, Novák Károly F. A. : Please regenerate the task. It's probably fine now. May 31, 2025 at 10:38 AM, 이도형 (Lee) : @FA NC An #8 AGV ERROR. Please check. May 31, 2025 at 11:13 AM, Mohammad Amir : @Manufacturing Please make E0CNVC52_M07 to OUT type as there is no empty trays ,one job is getting delayed for quite a long time because of this issue. Thank you very much! May 31, 2025 at 11:15 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 84 Pre STK > VD • Anode: 130 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 32 GF NC reel Available :- • AN: 423 • CA: 322 Thank you very much! May 31, 2025 at 11:26 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKA52_C01 there is Port interface Error. Thank you! May 31, 2025 at 11:30 AM, 카스텔 발라지 F.A. : This message was deleted. May 31, 2025 at 11:57 AM, 이도형 (Lee) : @FA NC Ca #8 AGV ERROR. Please check. May 31, 2025 at 12:01 PM, KIM SEYEON [김세연]_FA : @Ynja/ivancsa FA please check May 31, 2025 at 12:46 PM, Simon Dávid D SL NC : @FA hello #6 AGV NC AN error,megnéznétek köszönöm May 31, 2025 at 12:55 PM, 이도형 (Lee) : @FA VD An #10 AGV ERROR. Please check. May 31, 2025 at 1:23 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check C1STKA72_P21 there is INV-02 Runtime over error. Thank you very much! May 31, 2025 at 1:40 PM, Nguyen Huy : @FA Hello, pls request AGV to reposition the top/left plate in chamber 4-6 VD AN ,thank you May 31, 2025 at 1:45 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 55 Pre STK > VD • Anode: 109 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 81 GF NC reel Available :- • AN: 441 • CA: 331 Thank you very much! May 31, 2025 at 1:59 PM, Ashley🖤💚✨ : Hello. GF ST #2 AGV stopped outside L9. would like to ask for help. thank you May 31, 2025 at 2:03 PM, 정은탁 (Jung EunTak) : @FA NC An Robot #1 Error. Please check Thanks. May 31, 2025 at 2:07 PM, Simon Dávid D SL NC : @FA heloo NC Ca #3 robot error,megnéznétek köszönöm May 31, 2025 at 2:19 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_C01 there is Ready off during Forking error. Thank you very much! May 31, 2025 at 2:25 PM, Ynja/ivancsa FA : @Mohammad Amir Please delete a job AGV#05 in NC AN double storage May 31, 2025 at 2:28 PM, Mohammad Amir : Checking May 31, 2025 at 2:29 PM, Mohammad Amir : Job has been cancelled successfully as requested ✅. Thank you very much! May 31, 2025 at 2:30 PM, Ynja/ivancsa FA invited Ankhaa/Ivancsa FA. May 31, 2025 at 2:33 PM, Ynja/ivancsa FA : @Amir(MCS) Please delete a job AGV#07 in VD AN 4-6 chamber door is closed May 31, 2025 at 2:34 PM, Mohammad Amir : Job has been cancelled successfully as requested ✅. Thank you very much! May 31, 2025 at 2:35 PM, Nguyen Huy : @FA NC CA robot #3 error, pls check May 31, 2025 at 2:35 PM, Ynja/ivancsa FA : Thank you May 31, 2025 at 2:35 PM, Mohammad Amir : You are welcome! May 31, 2025 at 2:38 PM, Simon Dávid D SL NC : @FA hello NC CA #3 robot error,megnéznétek köszönóm May 31, 2025 at 2:43 PM, Novák Károly F. A. : Kész May 31, 2025 at 2:46 PM, Ankhaa/Ivancsa FA : @Amir(MCS) Please delete a job AGV#08 in VD AN 2-3 chamber door is closed May 31, 2025 at 2:46 PM, Mohammad Amir : Checking May 31, 2025 at 2:47 PM, Mohammad Amir : Job has been cancelled successfully as requested ✅. Thank you very much! May 31, 2025 at 2:48 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check C1CNV072_16_126/128 Data Mismatch and Data Loss error consequently,it is blocking stacking materials delivery. Thank you! May 31, 2025 at 3:17 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 48 Pre STK > VD • Anode: 101 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 94 GF NC reel Available :- • AN: 445 • CA: 331 Thank you very much! May 31, 2025 at 3:35 PM, Mohammad Amir : @Manufacturing Please check this issue ,it still exists that's why job for LTC0670 is Alternated. Thank you very much! May 31, 2025 at 4:36 PM, Mohammad Amir : @FA @Ynja/ivancsa FA Please check NC CA AGV#2 it is in Error and blocking AGV#10 and AGV#2. Thank you very much! May 31, 2025 at 4:50 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 38 Pre STK > VD • Anode: 104 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 109 GF NC reel Available :- • AN: 456 • CA: 337 Thank you very much! May 31, 2025 at 4:58 PM, Nguyen Huy : @Mohammad Amir hello, could you please check for me the lastest history of this mgz? MA2021 May 31, 2025 at 4:58 PM, Mohammad Amir : Sure, Checking. May 31, 2025 at 4:58 PM, Simon Dávid D SL NC : @FA hello 6/1 és 6/2 NC CA mgz emelő error ,megnéznétek köszönöm May 31, 2025 at 5:02 PM, Novák Károly F. A. : Jövök May 31, 2025 at 5:02 PM, Mohammad Amir : According to the latest history:- Magazine MA2021 located in Carrier MLA6178 . Last time it was removed from C1STKA72_M02. And it was removed as Garbage Carrier. Please let me know if you need anymore information. Thank you everyone! May 31, 2025 at 5:04 PM, Nguyen Huy : Can you check it further? Like what was the last machine in NC he was being produced May 31, 2025 at 5:05 PM, Mohammad Amir : Sure ,Checking. May 31, 2025 at 5:08 PM, Novák Károly F. A. : Kész mindkettő May 31, 2025 at 5:13 PM, Mohammad Amir : This message was deleted. May 31, 2025 at 5:13 PM, Mohammad Amir : Last Notching machine , magazine MA2021 was produced in :- C4NCA030_P04 at 13th May 2025 at 00:18. At 13th May 2025 1:56 it reached With carrier MLA6178 at C6VDA090_P02. Feel free to inform me if you need any further information. Thank you very much! May 31, 2025 at 5:17 PM, Nguyen Huy : Thank you for such detailed information, very appreciated it! May 31, 2025 at 5:18 PM, Mohammad Amir : You are welcome! May 31, 2025 at 5:22 PM, Nguyen Huy : @FA AGV #8 error near Robot 2 NC AN, pls check May 31, 2025 at 6:00 PM, QuangPhan : Hello! @FA NC CA 6/2 AGV #10 error. Thanks May 31, 2025 at 6:13 PM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.05.31 Time:18:00~06:00 1. BAEK HOJONG 백호종PM 2.Samkoo Lee minjae Köszönöm szépen May 31, 2025 at 6:17 PM, Ynja/ivancsa FA left this chatroom. May 31, 2025 at 6:20 PM, VK (mcs) : @FA Please check Cathode pre-STK C71 Port 20(9002) Load complete on error. May 31, 2025 at 6:46 PM, 원재 : @FA Nc An #8 error please check agv May 31, 2025 at 6:57 PM, VK (mcs) : @FA Can you please check Circular conveyor C1CNV072 port 32(16028) What is the carrier ID? Is there any actual carrier in that port. Thanks May 31, 2025 at 7:00 PM, Lajos Gábor F.A. : Yes, MLC4175, full May 31, 2025 at 7:03 PM, VK (mcs) : According to MCS, MLC4175 is in cathode VD 2/8 port 3. Can you please put it in manual port. May 31, 2025 at 7:43 PM, VK (mcs) : @FA Can you please check this issue. VD machine 1/3 is waiting for this material. Thx May 31, 2025 at 7:48 PM, Lajos Gábor F.A. : Solved May 31, 2025 at 7:52 PM, VK (mcs) : @Manufacturing Please check Cathode reel conveyor E0CNVC52 -M07 (9034) Direction of port is output. Please change it to input. There is a job to that port. Thx May 31, 2025 at 7:58 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please share available lot May 31, 2025 at 8:02 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 16 Pre STK > VD • Anode: 66 • Cathode: 03 Post STK > Stacking • Anode: 28 • Cathode: 97 GF NC reel Available :- • AN: 481 • CA: 344 May 31, 2025 at 8:23 PM, VK (mcs) : @Manufacturing Can you please check Cathode VD 2/8 port 3. That is the actual carrier ID? May 31, 2025 at 8:23 PM, VK (mcs) : What* May 31, 2025 at 8:24 PM, KIM SEYEON [김세연]_FA : @Zulaa/졸라/Ivancsa FA please check May 31, 2025 at 8:35 PM, VK (mcs) : If it is MLC4175 then please inform to Manufacturing team to fix carrier ID. Currently we have another MLC4175 in stacking line 6 /110 port 1 May 31, 2025 at 8:37 PM, Zulaa/졸라/Ivancsa FA : Yes. It s MLC 4175. May 31, 2025 at 8:38 PM, VK (mcs) : So please , before transferring to post-STK. inform to manufacturing team to fix carrier ID. May 31, 2025 at 8:43 PM, KIM SEYEON [김세연]_FA : how to fix the carrier ID? May 31, 2025 at 8:43 PM, KIM SEYEON [김세연]_FA : carrier ID from what to what? May 31, 2025 at 8:43 PM, VK (mcs) : @Zulaa/졸라/Ivancsa FA Can you please check this port as well. Stacking line 6/110 port 1 May 31, 2025 at 8:44 PM, VK (mcs) : Checking May 31, 2025 at 8:45 PM, 이한웅(삼구) : @김태헌 이거 실물 바코드 확인 한번 해주세요. May 31, 2025 at 8:45 PM, 이민재 : VD, 스택 실물 중복 확인했습니다 May 31, 2025 at 8:46 PM, KIM SEYEON [김세연]_FA : 플레이트 아이디가 두개인가보네요. May 31, 2025 at 8:46 PM, 이민재 : VD 건조 끝난지 얼마 지나지 않아서 스택 스테이션에 있는거 교체 하면 될거같습니다 May 31, 2025 at 8:46 PM, 이한웅(삼구) : 바코드 교체 하겠습니다. 혹시 VD는 어디 챔버인가요? May 31, 2025 at 8:46 PM, 이민재 : 스텍 제조에 전달 했습니다 May 31, 2025 at 8:47 PM, 이민재 : VD 2-8 우측 상단입니다 May 31, 2025 at 8:51 PM, VK (mcs) : Fighting out what is the actual carrier ID by system is hard. Since both carrier was UNKDUP ID. Probably one of them have a different ID in other side May 31, 2025 at 8:52 PM, KIM SEYEON [김세연]_FA : 네 이한웅조장님이 바코드 교체해주시면 VD후창고 넣었다가 다시 빼서 바코드 찍고 다시 VD후창고로 투입 부탁드립니다. May 31, 2025 at 8:54 PM, 이민재 : 네 알겠습니다 May 31, 2025 at 8:54 PM, 이한웅(삼구) : 현장에 있는 동일 바코드들 전부 폐기 하겠습니다. May 31, 2025 at 8:55 PM, KIM SEYEON [김세연]_FA : 네 감사합니다. 4175를 어떤 바코드로 교체했는지 알려주시면 그것을 다시 VD후창고 넣었을때 반송가능자재로 잡히는지 확인해보겠습니다. May 31, 2025 at 8:56 PM, 이민재 : 교체 완료후 공유드리겠습니다 May 31, 2025 at 8:59 PM, 이민재 : 스택 스테이션에 있던 중복 바코드 MLC4175, MLC4252로 교체 완료 하였습니다 May 31, 2025 at 9:00 PM, 김희래 : 스태킹쪽에 4175 위에 있던 매거진 ID로 VD 진행여부 확인 가능하실까요?? May 31, 2025 at 9:00 PM, KIM SEYEON [김세연]_FA : 스택에 있는것을 교체한건가요? 스택에 있는 매거진 ID VD 진행된건지 확인 부탁드립니다. May 31, 2025 at 9:01 PM, 이한웅(삼구) : 건조 완료입니다. May 31, 2025 at 9:03 PM, KIM SEYEON [김세연]_FA : 감사합니다. May 31, 2025 at 9:04 PM, KIM SEYEON [김세연]_FA : @VK (mcs) if mlc 417 from vd move to post vd storage, please check this plate can be checked as available lot. May 31, 2025 at 9:05 PM, VK (mcs) : May I ask, which MLC4175 Ticked has been changed. Stacking or VD ? May 31, 2025 at 9:06 PM, KIM SEYEON [김세연]_FA : at stack barcode changed. May 31, 2025 at 9:06 PM, KIM SEYEON [김세연]_FA : at vd no changed May 31, 2025 at 9:06 PM, VK (mcs) : Thank you . I will check it out. May 31, 2025 at 9:13 PM, QuangPhan : Hello! @FA NC AN 4/1 AGV #8 error. Thanks May 31, 2025 at 9:16 PM, KIM SEYEON [김세연]_FA : @이민재 @이한웅(삼구) 바쁘실텐데 확인 감사드립니다. May 31, 2025 at 9:47 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 09 Pre STK > VD • Anode: 82 • Cathode: 03 Post STK > Stacking • Anode: 28 • Cathode: 109 GF NC reel Available :- • AN: 499 • CA: 350 May 31, 2025 at 10:45 PM, VK (mcs) : @FA Please check Anode reel STK A 51 & 52 crane 02 Port interface error. May 31, 2025 at 11:31 PM, VK (mcs) : @FA Can you please check this issue. Thx May 31, 2025 at 11:33 PM, Khaliun/Ivancsa FA : @fa tech NC AN robot#1 error pls check May 31, 2025 at 11:38 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 02 Pre STK > VD • Anode: 65 • Cathode: 00 Post STK > Stacking • Anode: 39 • Cathode: 122 GF NC reel Available :- • AN: 493 • CA: 334 June 1, 2025 at 12:15 AM June 1, 2025 at 12:15 AM, 이한웅(삼구) : Please let me know which tray this reel is in - EC1M073F3204813B June 1, 2025 at 12:16 AM, 이한웅(삼구) : @VK June 1, 2025 at 12:23 AM, VK (mcs) : I couldn’t find reel with this LOT ID. June 1, 2025 at 12:27 AM, 이한웅(삼구) : thank you.. June 1, 2025 at 12:31 AM, Khaliun/Ivancsa FA : @Fa tech NC AN robot#2 error pls check June 1, 2025 at 1:13 AM, 이민재 : GF STK 71 PORT will be suspended due to inventory inspection June 1, 2025 at 1:27 AM, Zulaa/졸라/Ivancsa FA : @Fa tech, check pls. Robot 03 nc ca. No moving plate. June 1, 2025 at 1:42 AM, 이민재 : STK 71 PORT has been suspended for inventory inspection. Please do not use it. Нөөцийн тооллого хийхийн тулд STK 71 PORT-г зогсоосон байна. Ашиглахыг хориглоно уу. Az STK 71 PORT leállításra került leltár miatt. Kérjük, ne használja! Cổng STK 71 đã bị tạm dừng để kiểm kê hàng tồn kho. Vui lòng không sử dụng. June 1, 2025 at 1:55 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 MLC3152 has a wrong destination and it’s circulating. Please send it to STK. June 1, 2025 at 2:52 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 92 • Cathode: 00 Post STK > Stacking • Anode: 14 • Cathode: 112 GF NC reel Available :- • AN: 501 • CA: 342 June 1, 2025 at 3:33 AM, 원재 : @FA Nc Ca plz check AGV #10 June 1, 2025 at 3:38 AM, Dima Kusyk : @fa STK AGV #7,6 stopped near warehouse. Please check June 1, 2025 at 4:21 AM, Pavel : @fa on line 2 there is an error with AGV near machine 11, please check June 1, 2025 at 4:59 AM, VK (mcs) : @FA Please check Cathode Reel STK C52 June 1, 2025 at 5:12 AM, Lajos Gábor F.A. : Solved June 1, 2025 at 5:57 AM, Jun(정우준)_SKOH FA : 재고조사 끝나면 공유 부탁드립니다. June 1, 2025 at 6:24 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/13 Overtime (0):- Sick (1):Nagy Zsolt Holiday (1): Martina Dávid Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Kiss Balázs Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán Modul(2): Nagy Gábor, Magyar Balázs June 1, 2025 at 6:52 AM, Ivan Chobitko : Good morning Stop AGV ST please We can’t to do good calculating when AGV delivering material June 1, 2025 at 6:59 AM, Jun(정우준)_SKOH FA : are you still checking materials??? June 1, 2025 at 7:04 AM, Jun(정우준)_SKOH FA : I was informed at 6:30 that the material check was complete so I started all the machines. do you need to stop agvs? June 1, 2025 at 7:06 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 09 Pre STK > VD • Anode: 131 • Cathode: 22 Post STK > Stacking • Anode: 00 • Cathode: 66 GF NC reel Available :- • AN: 534 • CA: 351 June 1, 2025 at 7:13 AM, Ivan Chobitko : ST-PK 6:00-9:00 June 1, 2025 at 7:14 AM, Jun(정우준)_SKOH FA : okay, then when you finish, tell me plz and i stopped ST CV for stopping AGVs. June 1, 2025 at 7:15 AM, Dániel Hufnágel : Please mention us when everything ready for start June 1, 2025 at 7:29 AM, Ivan Chobitko : Thank you ST 1-3 lines finished June 1, 2025 at 7:36 AM, Dániel Hufnágel : Then we start C/V line at anode are June 1, 2025 at 7:36 AM, Dániel Hufnágel : Area June 1, 2025 at 7:59 AM, Simon Dávid D SL NC : @FA hello #7 AGV NC CA error,megnéznétek,kószönóm June 1, 2025 at 8:00 AM, Lan Nhi : hello. plz check AGV #4 is reporting error at line4 Nc/An. thanks June 1, 2025 at 8:08 AM, Dariimaa/다리마/Ivancsa : Solved June 1, 2025 at 8:08 AM, Dariimaa/다리마/Ivancsa : Solved June 1, 2025 at 8:12 AM, Lan Nhi : Thank you June 1, 2025 at 9:06 AM, Ivan Chobitko : CA C/V start too please We finish June 1, 2025 at 9:12 AM, Jun(정우준)_SKOH FA : okay June 1, 2025 at 10:26 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 78 • Cathode: 01 Post STK > Stacking • Anode: 34 • Cathode: 154 GF NC reel Available :- • AN: 503 • CA: 371 June 1, 2025 at 10:42 AM, 이도형 (Lee) : @FA NC An #2 AGV ERROR. Please check. June 1, 2025 at 12:28 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) helli NC CA 1/2 és 1/3 már nagyon régen kapot üres mgz-t ,megnéznéd,köszönöm June 1, 2025 at 12:30 PM, duzzaman Md (MCS) : Unfortunately, no materials available. June 1, 2025 at 12:32 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 51 • Cathode: 00 Post STK > Stacking • Anode: 55 • Cathode: 178 GF NC reel Available :- • AN: 490 • CA: 393 June 1, 2025 at 12:47 PM, Simon Dávid D SL NC : @FA hello NC AN #8 AGV error,megnéznétek köszönöm June 1, 2025 at 12:58 PM, Simon Dávid D SL NC : @FA hello NC AN #8 AGV error,megnéznétek köszönöm June 1, 2025 at 1:25 PM, Lan Nhi : @FA plz. check for me AGV #8 error in machine 4-1 An. thanks June 1, 2025 at 1:26 PM, 김종원 : solved June 1, 2025 at 1:49 PM, Lan Nhi : @RTV hello. please check for me. WATER/An line2 is not provided with empty ammo, 1/1 at 11:19, 1/2 at 12:41, 1/3 at 13:33. thanks June 1, 2025 at 1:56 PM, duzzaman Md (MCS) : VC 03 is going to AN NC 1/1 1/2 is OOS 1/3 job has been created June 1, 2025 at 2:05 PM, Lan Nhi : Thanks you June 1, 2025 at 2:07 PM, Simon Dávid D SL NC : @duzzaman Md (MCS) hello VD CA #49-es kemence error,#51 kemencébe átt lett pakolva törölnéd a #49-es kemence adatait,köszönöm June 1, 2025 at 2:15 PM, duzzaman Md (MCS) : Done June 1, 2025 at 2:24 PM, 이도형 (Lee) : @FA VD An #4 AGV ERROR. Please check. June 1, 2025 at 3:03 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 00 Pre STK > VD • Anode: 45 • Cathode: 01 Post STK > Stacking • Anode: 38 • Cathode: 178 GF NC reel Available :- • AN: 509 • CA: 412 June 1, 2025 at 3:49 PM, Simon Dávid D SL NC : @FA hello NC CA 6/1 magazin emelő lift error ,megnéznétek köszönöm June 1, 2025 at 3:50 PM, Zsurbej Zsolt F.A. : Megyünk June 1, 2025 at 5:16 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 00 Pre STK > VD • Anode: 53 • Cathode: 00 Post STK > Stacking • Anode: 20 • Cathode: 184 GF NC reel Available :- • AN: 516 • CA: 401 June 1, 2025 at 5:22 PM, Lika : NGV station has been out of service for several hours, empty stores are not being picked up or delivered to Line 1 #20 June 1, 2025 at 5:23 PM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) Please check why MLA4007 not moving June 1, 2025 at 5:24 PM, Dániel Hufnágel : Is this stacking station? June 1, 2025 at 5:24 PM, Lika : Yes June 1, 2025 at 5:26 PM, duzzaman Md (MCS) : Suitable fixed auto port doesn't exist between port and the transport machine June 1, 2025 at 5:26 PM, Dániel Hufnágel : Is this port empty now? June 1, 2025 at 5:29 PM, duzzaman Md (MCS) : It moved June 1, 2025 at 5:29 PM, Lika : no, there are empty cathode magazine June 1, 2025 at 5:29 PM, Dániel Hufnágel : Please tell me the ID number of the plate June 1, 2025 at 5:31 PM, Lika : MLC2197 June 1, 2025 at 5:32 PM, Dániel Hufnágel : @duzzaman Md (MCS) Please instal this carrier by MCS side! Acs side is good! C1STM200_P02 June 1, 2025 at 5:36 PM, duzzaman Md (MCS) : According to MCS/RTD ,Carrier MLC2197, is inside the STK. In c1stka71, 0105302 Please send it to CNV manually l. June 1, 2025 at 5:38 PM, Dániel Hufnágel : Physically is on the port June 1, 2025 at 5:41 PM, Dániel Hufnágel : Recheck it please, by the SCS side i can not find that carrier June 1, 2025 at 5:48 PM, duzzaman Md (MCS) : In SCS its there . Checking further on it June 1, 2025 at 5:57 PM, Lan Nhi : 17:45 GF/NC. An 5/1 machine has a MA6459 magazine parked in the outline section June 1, 2025 at 5:58 PM, Lan Nhi : @FA Plz check June 1, 2025 at 6:06 PM, VK (mcs) : There is something wrong. Cathode material stored in anode STK. So Please first rack out carrier manually from C1STKA72 shelf (0105302) and check what is the exact carrier ID. Thx June 1, 2025 at 6:12 PM, QuangPhan : Hello! @FA There was a mgz flip problem on the outline area. Please come NC AN 5/1 check it. June 1, 2025 at 6:12 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please send fa technicians to check this issue June 1, 2025 at 6:13 PM, KIM SEYEON [김세연]_FA : take photos and include it in the report June 1, 2025 at 6:13 PM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 해당랙에 있는 실물확인 부탁드립니다. June 1, 2025 at 6:14 PM, Farkas Tamàs : Hello. Ok June 1, 2025 at 6:14 PM, Farkas Tamàs : Ok June 1, 2025 at 6:14 PM, Baek Hojong(백호종)FA : 확인 June 1, 2025 at 6:26 PM, VK (mcs) : This message was deleted. June 1, 2025 at 6:26 PM, VK (mcs) : It seems the actual carrier should be in stacking 1st line port 2 but MCS received command from STKA72 On 06.01.2025 at 2:45:05 and it was an operation action. It's better to check playback as well. Thank you June 1, 2025 at 7:01 PM, 전 운 (Jeon Woon) : PM님 명일 3라인 SOP 06시부터 시작으로 Station 정상화 부탁드리겠습니다. LR은 04시경 부터 누르도록 하겠습니다. @Baek Hojong(백호종)FA June 1, 2025 at 7:02 PM, Baek Hojong(백호종)FA : 네 확인하겠습니다 4시 LR시 집중모니터링하겠습니다 June 1, 2025 at 7:10 PM, QuangPhan : Hello! @FA NC AN (E0CNVA52) error. Thanks June 1, 2025 at 7:18 PM, Khaliun/Ivancsa FA : Solved June 1, 2025 at 7:22 PM, QuangPhan : Thank you June 1, 2025 at 7:28 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Load over size error. June 1, 2025 at 8:02 PM, QuangPhan : Dear @Fa AN VD 6_4 #49 stopped Temperture upper and lower limit setting value exceeded Please send mgz warehouse, the technicians repair machine start. Thank you. June 1, 2025 at 8:11 PM, 조한진(Jin) : @mcs please check next available lot June 1, 2025 at 8:13 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 00 Pre STK > VD • Anode: 35 • Cathode: 00 Post STK > Stacking • Anode: 37 • Cathode: 134 GF NC reel Available :- • AN: 517 • CA: 387 June 1, 2025 at 8:16 PM, QuangPhan : Hello! @FA NC AN Robot #3 error. Thanks June 1, 2025 at 8:42 PM, 인제(Hwang) : @VK (mcs) VD An 6-2(#47) half chamber, Please check LR June 1, 2025 at 8:48 PM, VK (mcs) : This message was deleted. June 1, 2025 at 8:49 PM, VK (mcs) : Information in empty ports were remained. Please transfer carrier to the Post-STK and apply again LR for all ports. Thx June 1, 2025 at 8:53 PM, 인제(Hwang) : @FA Please send the plates for that chamber to the warehouse. Thank you! June 1, 2025 at 8:53 PM, 인제(Hwang) : NC An AGV#8 Error June 1, 2025 at 8:55 PM, Baek Hojong(백호종)FA : @VK (mcs) Is it possible to initialize all stacking 3 lines lr ur June 1, 2025 at 8:58 PM, VK (mcs) : Do you mean. clearing all LR and UR for line 3? June 1, 2025 at 8:58 PM, 인제(Hwang) : NC An Robot#3 Error June 1, 2025 at 9:00 PM, VK (mcs) : Because we already received LR for line 3 and materials are on the way. June 1, 2025 at 9:02 PM, Baek Hojong(백호종)FA : Sorry, just proceed as is June 1, 2025 at 9:23 PM, Dima Kusyk : @fa STK lines 4-6 AGV#9 stopped near storage June 1, 2025 at 9:39 PM, 인제(Hwang) : @FA Please move to the warehouse June 1, 2025 at 9:41 PM, 김진수 : @Baek Hojong(백호종)FA 상기 내용 조치 바랍니다 June 1, 2025 at 9:48 PM, T. Gàbornè C SL NC : @MCS Please check the M07 and M08 ports on CA side, no reels arrive. Thank you very much June 1, 2025 at 9:50 PM, VK (mcs) : M08 already arrived M07 carrier is on the way. June 1, 2025 at 9:53 PM, 인제(Hwang) : NC An Robot#3 Robot Movement Error June 1, 2025 at 10:02 PM, 김진수 : Could you let us know who is manager or chief in GF tonight? We need contact point when we have a problem. June 1, 2025 at 10:05 PM, KIM SEYEON [김세연]_FA : Photo June 1, 2025 at 10:05 PM, KIM SEYEON [김세연]_FA : 금일 FA shift leader 입니다. June 1, 2025 at 10:06 PM, KIM SEYEON [김세연]_FA : Photo June 1, 2025 at 10:06 PM, KIM SEYEON [김세연]_FA : 금일 GF 1F AGV 대응인력입니다. June 1, 2025 at 10:07 PM, KIM SEYEON [김세연]_FA : FA 한국인 테크니션분은 @Baek Hojong(백호종)FA 피엠님 입니다. June 1, 2025 at 10:10 PM, Baek Hojong(백호종)FA : 06.01 night shift 18:00-06:00 Baek hojong 백호종 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 1, 2025 at 10:25 PM, VK (mcs) : @FA Please check AGV#1 Cathode notching I front of 6/1 AGV stopped for a while. Destination is CA Notching 6/1 port 4. Thx June 1, 2025 at 10:27 PM, VK (mcs) : It's started to unload. Thx June 1, 2025 at 10:33 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 06 • Cathode: 00 Pre STK > VD • Anode: 33 • Cathode: 03 Post STK > Stacking • Anode: 25 • Cathode: 145 GF NC reel Available :- • AN: 532 • CA: 388 June 1, 2025 at 11:10 PM, T. Gàbornè C SL NC : @FA Hello Please hepl me. CA VD 1-9 no started, please send the plate in the Storage. Thank you for much. June 1, 2025 at 11:25 PM, T. Gàbornè C SL NC : @FA Please check CA reel Storage #52 Tray ID loss error Thank you. June 1, 2025 at 11:43 PM, VK (mcs) : @fA Please check Cathode reel conveyor C52 RTV - lift unload destination port auto off alarm June 1, 2025 at 11:48 PM, Csuti Zoltán F.A : I'm here June 2, 2025 at 12:14 AM June 2, 2025 at 12:14 AM, Lajos Gábor F.A. : Done June 2, 2025 at 12:14 AM, Lajos Gábor F.A. : Done June 2, 2025 at 1:01 AM, QuangPhan : Hello! @VK (mcs) Line 3 is now in mass production. Could you please check NC AN 3/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! June 2, 2025 at 1:02 AM, QuangPhan : Same NC AN 6/3 June 2, 2025 at 1:05 AM, VK (mcs) : For both jobs assigned but unfortunately all AGVs are busy. I changed priority June 2, 2025 at 1:06 AM, QuangPhan : Hello! @FA NC AN AGV #4 error June 2, 2025 at 1:13 AM, 인제(Hwang) : NC An AGV#3 An 3-1 아웃포트에서 풀매거진 배출 간 매거진 전도발생 June 2, 2025 at 1:21 AM, Baek Hojong(백호종)FA : @최명운(CHOI MYOUNGWOON) NC An AGV#3 An 3-1 아웃포트에서 풀매거진 배출 간 매거진 전도발생 현황확인 부탁드립니다 June 2, 2025 at 1:46 AM, T. Gàbornè C SL NC : @MCS Please check CA 3lines have a task AGV. Thank you very much June 2, 2025 at 1:47 AM, VK (mcs) : There is a job to 3/3 port 4 and carrier is waiting for AGV. June 2, 2025 at 1:56 AM, T. Gàbornè C SL NC : 3/1 and 3/2 there is job? June 2, 2025 at 1:58 AM, VK (mcs) : There is UR for 3/1 and job assigned but this also waiting for AGV. June 2, 2025 at 2:04 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 32 • Cathode: 02 Post STK > Stacking • Anode: 35 • Cathode: 174 GF NC reel Available :- • AN: 530 • CA: 393 June 2, 2025 at 2:55 AM, VK (mcs) : @FA Please check Cathode reel STK C51-C01 Load over size error. June 2, 2025 at 3:22 AM, Lajos Gábor F.A. : Done June 2, 2025 at 4:55 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 58 • Cathode: 178 GF NC reel Available :- • AN: 509 • CA: 383 June 2, 2025 at 5:19 AM, T. Gàbornè C SL NC : @FA Please check CA reel Storage #52 Tray abnormal error STP 01 up cylinder error Thank you. June 2, 2025 at 6:05 AM, Truong : This message was deleted. June 2, 2025 at 6:14 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 60 • Cathode: 163 GF NC reel Available :- • AN: 510 • CA: 384 June 2, 2025 at 6:21 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.02. "B" műszak, 9+1+1/12+1 Tech, 1Sl Overtime(1): Kiss Balázs Holiday(1): 방혁_이반차 (Bang Hyuk) Sick(3): Takács Ádám, Denkó János, Böröcz Tamás Shift Change(0): Translater: Golth Noémi (Korean - Hungarian) --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(1): Boromisza Z June 2, 2025 at 7:04 AM, Dariimaa/다리마/Ivancsa : @MCS good morning Please delete the VD CA chamber 3-9 job. Because the door is closed. June 2, 2025 at 7:09 AM, duzzaman Md (MCS) : Done. Thank you June 2, 2025 at 7:32 AM, 정은탁 (Jung EunTak) : @FA NC Ca AGV #7 Error. Please Check. June 2, 2025 at 7:33 AM, 정은탁 (Jung EunTak) : @FA NC Ca Robot #1 Error. Please Check. June 2, 2025 at 7:36 AM, Csanálosi Gábor FA : Coming June 2, 2025 at 7:37 AM, Dariimaa/다리마/Ivancsa : Solved June 2, 2025 at 7:37 AM, Dariimaa/다리마/Ivancsa : Solved June 2, 2025 at 7:45 AM, 김지수PM(Gyuri)_FA : @김종원 순환물류 음극쪽 16144 트랙 확인 부탁드려요 June 2, 2025 at 7:45 AM, Szücs Géza FT-B : @Csanálosi Gábor FA CNV72-t megnézed légyszives? June 2, 2025 at 7:47 AM, Tumee invited Maya/IvancsaFA and Gua/ IvancsaFa. June 2, 2025 at 7:52 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 51 • Cathode: 146 GF NC reel Available :- • AN: 498 • CA: 372 June 2, 2025 at 7:53 AM, Csanálosi Gábor FA : Máris, rtv hibám volt June 2, 2025 at 7:54 AM, Csanálosi Gábor FA : Asszem már nincs hiba. June 2, 2025 at 8:03 AM, M.Ferenc "B"Nc/Vd SL : @FA @MCS NC CA AGV does not transport full magazines from the 3/1 NC machine. Please check what could be the problem. June 2, 2025 at 8:10 AM, Sazzad Bhai SKon : Checking June 2, 2025 at 8:12 AM, Sazzad Bhai SKon : For both anode and cathode side: last unload request was at ~7:30, so please raise UR again June 2, 2025 at 8:14 AM, Sazzad Bhai SKon : AGV is in alarm: light curtains detected June 2, 2025 at 8:34 AM, 김지수PM(Gyuri)_FA : @FA could you please check the RTV(E0CNVC52) seems like it has been stopped without any alarm June 2, 2025 at 8:36 AM, Sazzad Bhai SKon : @FA Please check the following 9 UNK plates C1STKA72 (0105501, 0105502, 0105201, 0105002, 0105202) C1STKC72 (0100105, 0100203, 0205903, 0200106) June 2, 2025 at 8:39 AM, Csanálosi Gábor FA : Coming June 2, 2025 at 8:46 AM, Sazzad Bhai SKon : Hi, RTV is okay. But it is waiting to deliver at BP08 port. But the carrier at BP08 has no job. June 2, 2025 at 8:47 AM, Sazzad Bhai SKon : MCS will transfer the material back to the StK: LTC0656 June 2, 2025 at 8:48 AM, 김지수PM(Gyuri)_FA : Thanks! June 2, 2025 at 9:20 AM, Sazzad Bhai SKon : @FA Magazine MC5174 is duplicated. MLC2240 (C1STKC72, 0100201) MLC4208 (C1STKC72, 0205905) please remove any of the plates and confirm their magazines. 🙏 June 2, 2025 at 9:28 AM, Dariimaa/다리마/Ivancsa : Done June 2, 2025 at 9:29 AM, Sazzad Bhai SKon : Thank you, did you find MC5714 on the plate? June 2, 2025 at 9:35 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 45 • Cathode: 160 GF NC reel Available :- • AN: 499 • CA: 365 June 2, 2025 at 9:42 AM, Dariimaa/다리마/Ivancsa : Yes. It was on MLC4208 June 2, 2025 at 9:45 AM, Sazzad Bhai SKon : According to the latest log MC5174 is duplicated. Please rack out any of the plates on Manual port. @김수민 Hi, could you please replace the magazine ID? June 2, 2025 at 9:45 AM, 김지수PM(Gyuri)_FA : @김종원 순환물류CNV 음극 M04에서 캐리어 4개 빼주시면 감사하겠습니다. June 2, 2025 at 9:55 AM, Debreczeni Ármin : At GF L3 AGV's are moving very rare June 2, 2025 at 9:55 AM, 김지수PM(Gyuri)_FA : MLC3046 지금 m04에 나온거 풀인가요? June 2, 2025 at 10:14 AM, 김종원 : 뺀거 다 공이었습니다 June 2, 2025 at 10:15 AM, 김지수PM(Gyuri)_FA : 데이터로는 풀이여서...여튼 확인 감사드려요 June 2, 2025 at 10:16 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 40 • Cathode: 149 GF NC reel Available :- • AN: 490 • CA: 362 June 2, 2025 at 10:38 AM, 김지수PM(Gyuri)_FA : @fa please check C1STKA72_C02 > fork 1 load position error June 2, 2025 at 10:39 AM, Csanálosi Gábor FA : I am here June 2, 2025 at 10:39 AM, Csanálosi Gábor FA : @M.Ferenc "B"Nc/Vd SL tudnál jönni an 72 daruhoz? June 2, 2025 at 10:40 AM, M.Ferenc "B"Nc/Vd SL : 1 perc és ott vagyok June 2, 2025 at 10:40 AM, M.Ferenc "B"Nc/Vd SL : Katód? June 2, 2025 at 10:41 AM, Csanálosi Gábor FA : Anod June 2, 2025 at 10:47 AM, Csanálosi Gábor FA : Can you come here with a camera? @Szücs Géza FT-B esetleg? June 2, 2025 at 10:48 AM, Szücs Géza FT-B : GF ST öltöző jó lesz? June 2, 2025 at 10:48 AM, Csanálosi Gábor FA : Nem June 2, 2025 at 10:48 AM, 김지수PM(Gyuri)_FA : Okay I'm goingg June 2, 2025 at 10:48 AM, Csanálosi Gábor FA : Nem csak a kamera a lényeg June 2, 2025 at 10:48 AM, Szücs Géza FT-B : oks June 2, 2025 at 10:49 AM, Szücs Géza FT-B : megyek June 2, 2025 at 10:55 AM, Csanálosi Gábor FA : @duzzaman Md (MCS) can u pls redirect AN VD AGV1 to another port tu unload? June 2, 2025 at 11:10 AM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) NC AN AGV#10 is idle with empty magazine. Please check. Thank you! June 2, 2025 at 11:21 AM, duzzaman Md (MCS) : This is going to Z01 of C1STKA72 When there will be suitable autoports, it will be delivered June 2, 2025 at 11:24 AM, duzzaman Md (MCS) : The job was terminated by operator operator. Creating a new job June 2, 2025 at 11:36 AM, FACS_Wooseok Choi : @Mcs staking agv station 4line 15unit data miss match. It's MLA0097 in the sim data, but MLA4186 in the port. Please change it. June 2, 2025 at 11:38 AM, FACS_Wooseok Choi : And now the situation is unload request. June 2, 2025 at 11:46 AM, duzzaman Md (MCS) : So, the actuall carrier there is MLA4186 ? June 2, 2025 at 11:49 AM, Csanálosi Gábor FA : @duzzaman Md (MCS) can you tell me pls MLA 1166 finished in witch chamber ? June 2, 2025 at 11:51 AM, duzzaman Md (MCS) : Allow me moment please June 2, 2025 at 11:53 AM, FACS_Wooseok Choi : Yes June 2, 2025 at 11:57 AM, FACS_Wooseok Choi : The exact port name is C4STM160_P01. Thank u June 2, 2025 at 12:01 PM, duzzaman Md (MCS) : C0PVA030 June 2, 2025 at 12:03 PM, duzzaman Md (MCS) : Thank you for the information. Its updated June 2, 2025 at 12:05 PM, FACS_Wooseok Choi : You r welcome. June 2, 2025 at 12:19 PM, Csanálosi Gábor FA : Thats yaskawa, i am interested witch VD chamber was in June 2, 2025 at 12:25 PM, duzzaman Md (MCS) : This message was deleted. June 2, 2025 at 12:26 PM, Szücs Géza FT-B : Thank You June 2, 2025 at 12:26 PM, Csanálosi Gábor FA : Thank you! June 2, 2025 at 12:27 PM, duzzaman Md (MCS) : Thank you too. Sorry it'd be #33 June 2, 2025 at 12:27 PM, Szücs Géza FT-B : @M.Ferenc "B"Nc/Vd SL meg tudnátok nézni ennek a VD-nek az ajtaját? van-e rajta sérülés, karcolás? Lehet a VD gép ajtaja csapódott a magazinok fülére. June 2, 2025 at 12:29 PM, M.Ferenc "B"Nc/Vd SL : Visszamegyek kajából és megnézzük. June 2, 2025 at 12:51 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 36 • Cathode: 133 GF NC reel Available :- • AN: 481 • CA: 342 June 2, 2025 at 1:13 PM, M.Ferenc "B"Nc/Vd SL : Jelen pillanatban a gép üzemel. Ebben a formában sérülést vagy bármi nyomot nem látok az ajtón. June 2, 2025 at 1:23 PM, Csanálosi Gábor FA : Tudod hogy mikor végez? Felnyitva látnánk csak. June 2, 2025 at 1:25 PM, Nagy Dávid 4 : Anod press 3 U/W 15 számú agv mikor lesz újra működő képes várunk az anyagra help help köszönöm szépen June 2, 2025 at 1:44 PM, M.Ferenc "B"Nc/Vd SL : Nézem June 2, 2025 at 1:47 PM, M.Ferenc "B"Nc/Vd SL : 15:57-kor nyit June 2, 2025 at 2:24 PM, 김지수PM(Gyuri)_FA : @duzzaman Md (MCS) Could you please check the C4STM160_P01 According to the ACS, I can check the MLA0097 is now on the c4stm160_p01. But In RTD and MCS, MLA0097 Is in the VD. Now MLA4186 is on that P01 June 2, 2025 at 2:25 PM, 김지수PM(Gyuri)_FA : It it possible, please update the location of MLA4186 June 2, 2025 at 2:25 PM, duzzaman Md (MCS) : Checking June 2, 2025 at 2:28 PM, duzzaman Md (MCS) : As we see it MCS/RTD, MLA4186 is at C4STM160_P01 June 2, 2025 at 2:28 PM, Truong : NC Ca agv #10 error please come check June 2, 2025 at 2:38 PM, Truong : again error @FA June 2, 2025 at 2:55 PM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) Please delete the VD CA AGV#10 job. The 6-10 chamber door is closed. Thank you! June 2, 2025 at 2:59 PM, duzzaman Md (MCS) : Done June 2, 2025 at 3:41 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 50 • Cathode: 144 GF NC reel Available :- • AN: 483 • CA: 340 June 2, 2025 at 4:05 PM, 김지수PM(Gyuri)_FA : @fa please check C1STKC72_c02 >oversize error June 2, 2025 at 4:07 PM, 이도형 (Lee) : @FA C1STKC72 Load Oversize Error June 2, 2025 at 4:08 PM, Kovács Ágnes : Coming June 2, 2025 at 4:08 PM, Sazzad Bhai SKon : C0PVA010_P12 Is this port working? AGV can not pick magazines from here June 2, 2025 at 4:12 PM, Kovács Ágnes : Solved June 2, 2025 at 4:51 PM, 정은탁 (Jung EunTak) : @FA NC An 4-1 AGV #8 Error. Please Check. June 2, 2025 at 4:57 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 67 • Cathode: 176 GF NC reel Available :- • AN: 483 • CA: 353 June 2, 2025 at 5:57 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.02 Time: 18:00-06:00 1. Ji Seok Beom June 2, 2025 at 6:00 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 2, 2025 at 7:22 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 142 • Cathode: 220 GF NC reel Available :- • AN: 505 • CA: 373 June 2, 2025 at 8:05 PM, Nguyên : NC AN GF AGV#8 Error June 2, 2025 at 8:25 PM, Nguyên : C1STKA71_C01 C1STKA71_C02 come fix it for me June 2, 2025 at 8:56 PM, Nguyên : NC AN GF AGV#4 Error June 2, 2025 at 8:56 PM, VK (mcs) : @FA Please check Cathode Reel STKC51 -C01 Ready off during forking June 2, 2025 at 8:59 PM, Nguyên : Come check for me All AGV AN GF NC are non-animated June 2, 2025 at 9:16 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA could you help? what is not animated June 2, 2025 at 9:25 PM, VK (mcs) : It seems everything is normal. Just in cathode side AGVs are waiting to unloading due to a lack of Empty material. June 2, 2025 at 9:25 PM, Mr.Miti (미티) FA : Im here June 2, 2025 at 9:31 PM, Mr.Miti (미티) FA : No not here im at c51 June 2, 2025 at 9:32 PM, Nguyên : NC AN GF AGV#8 Error June 2, 2025 at 9:39 PM, 인제(Hwang) : Please check 71stk Data Missmatch Error June 2, 2025 at 9:39 PM, 인제(Hwang) : Ca June 2, 2025 at 9:49 PM, 인제(Hwang) : NC Ca AGV#1 전원off 상태이고 모든AGV 동작 멈춘상태입니다. 확인 부탁드립니다 June 2, 2025 at 9:51 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share ava8lot June 2, 2025 at 9:55 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 179 • Cathode: 246 GF NC reel Available :- • AN: 498 • CA: 381 June 2, 2025 at 9:56 PM, KIM SEYEON [김세연]_FA : @인제(Hwang) 공매거진이 없어서 agv 반송이없는것으로 보입니다. June 2, 2025 at 9:56 PM, KIM SEYEON [김세연]_FA : @지석범PM (이반차FA) 피엠님 NC CA AGV1번 마지막 알람 확인 부탁드리며, 왜 OFF인지 확인 부탁드립니다. June 2, 2025 at 9:57 PM, 인제(Hwang) : 공매거진 가지고있는 AGV있고 로봇포트에 공매거진 나와있습니다. AGV#1이 동선상에 그냥 전원Off상태로 다른AGV 동선을 막고있는거같은데 몽골분들이 확인중입니다 June 2, 2025 at 10:08 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다 June 2, 2025 at 10:12 PM, 지석범PM (이반차FA) : 휴대용 배터리로 해당 agv 임시 라인 아웃했습니다. June 2, 2025 at 10:22 PM, 인제(Hwang) : NC An AGV#4 check please It keeps stopping at the same location due to sensor detection (in front of An 4-1 outport) June 2, 2025 at 11:29 PM, Nguyên : NC AN GF AGV#4 Error June 2, 2025 at 11:48 PM, Nguyên : NC AN GF AGV#6 Error June 3, 2025 at 1:11 AM June 3, 2025 at 1:11 AM, Nguyên : Please check for me. VD GF AN 53(6-8) 09(1-9). AGV only put in 2 Balettes. June 3, 2025 at 1:16 AM, VK (mcs) : RTD received unload complete report, after Load request for ports 1&2 Currently we received LR for empty ports at 00:17 Materials will be transferred they are available. June 3, 2025 at 1:19 AM, Nguyên : Thank you June 3, 2025 at 1:25 AM, Barta Rudi : @VK (mcs) Hello. The AGV hasn’t picked up the finished magazines from the 1/2 machine for a long time. Could someone take a look at it? June 3, 2025 at 1:26 AM, Barta Rudi : Cathode June 3, 2025 at 1:29 AM, VK (mcs) : All AGVs are busy. Currently due to a lack of empty carriers. AGVs can not finish job and it takes time. June 3, 2025 at 2:00 AM, VK (mcs) : @FA Please check Cathode pre-STK C71 port 21 (13003) It's out of service. June 3, 2025 at 2:46 AM, Nguyên : all AGV AN GF NC are not working.please check for me June 3, 2025 at 2:57 AM, 김현태 : NC AN AGV #4 error. Thanks June 3, 2025 at 3:00 AM, VK (mcs) : @FA Can you please check this issue. Many carriers are waiting in conveyor. June 3, 2025 at 3:02 AM, VK (mcs) : There are 10 AGVs and all of them have a job. Currently due to a lack of empty MGZs. AGVs can not finish job. June 3, 2025 at 3:25 AM, Zulaa/졸라/Ivancsa FA : Solved June 3, 2025 at 3:25 AM, 김현태 : NC AN AGV #4 error. Thanks June 3, 2025 at 3:44 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 195 • Cathode: 215 GF NC reel Available :- • AN: 485 • CA: 438 June 3, 2025 at 3:46 AM, 김현태 : VD CA AGV #4 error. Thanks June 3, 2025 at 3:56 AM, Nguyên : NC AN GF AGV#2 Error June 3, 2025 at 3:56 AM, 인제(Hwang) : NC An AGV#2 An 3-3 아웃포트 풀매거진 배출 간 안착불량으로 매거진 전도 발생했습니다 June 3, 2025 at 3:57 AM, 인제(Hwang) : @지석범PM (이반차FA) @최명운(CHOI MYOUNGWOON) June 3, 2025 at 4:37 AM, 김현태 : NC CA AGV #2 error. Thanks June 3, 2025 at 5:25 AM, Nguyên : NC AN GF AGV#6 Error June 3, 2025 at 5:34 AM, Nguyên : 1/1 NC AN GF AGV#7 Error June 3, 2025 at 5:42 AM, Nguyên : This message was deleted. June 3, 2025 at 5:52 AM, Barta Rudi : @FA NC CA AGV 10 stop, please check, thank you June 3, 2025 at 5:53 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 196 • Cathode: 222 GF NC reel Available :- • AN: 480 • CA: 452 June 3, 2025 at 6:00 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.03. "B" műszak, 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(2): Kiss Balázs, Szabadi Miklós Holiday(2): Denkó János, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Böröcz Tamás Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián, Kiss Balázs, Szabadi Miklós --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Boromisza Zoltán, G June 3, 2025 at 6:02 AM, Truong : Good morning NC CA agv #6 error @Fa June 3, 2025 at 6:35 AM, M.Ferenc "B"Nc/Vd SL : Good Morning! @FA AGV #1 It is parked next to 6/1, outside the traffic zone, in a deactivated state. It has 6 full magazines inside. It is obstructing another AGV. Please check. June 3, 2025 at 6:37 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01, Run time over error. Thank you June 3, 2025 at 6:46 AM, Csanálosi Gábor FA : Done June 3, 2025 at 6:47 AM, Csanálosi Gábor FA : @Shakir (MCS) pls redirect nc an agv 4 to other port, it has problem at the current port. June 3, 2025 at 6:50 AM, Csanálosi Gábor FA : Szia, megnéztem, nincs benne szufla. June 3, 2025 at 6:55 AM, M.Ferenc "B"Nc/Vd SL : Lehet vele csinálni valamit? June 3, 2025 at 6:57 AM, Csanálosi Gábor FA : Így nem, rajta vagyok. ;) June 3, 2025 at 6:57 AM, M.Ferenc "B"Nc/Vd SL : Nem töltőre kellett volna mennie, ha merül? Ez teljesen ellenkező irányba állt ki a pályáról. June 3, 2025 at 6:58 AM, Shakir (MCS) : @FA @ACS I have cancelled the Job for AGV 04 NCAN, due to port unload issue could you please transfer mgz to gantry input port. Thank you June 3, 2025 at 7:01 AM, Shakir (MCS) : @FA Please check agv05, fork1 Inplace abnormal. Thank you June 3, 2025 at 7:04 AM, Csanálosi Gábor FA : Done June 3, 2025 at 7:06 AM, Shakir (MCS) : @FA @ACS VD-CA-3-2, One job is terminated there is 3 plate inside VD chamber, could you please transfer MLC3195 at P02 plate to STK and press LR again. Thank you June 3, 2025 at 7:07 AM, Csanálosi Gábor FA : Sry i was busy elswhere, is that issue resolved? June 3, 2025 at 7:07 AM, Shakir (MCS) : I will do that Thank you June 3, 2025 at 7:08 AM, Csanálosi Gábor FA : Ez nem magától állt ki oda, hanem szerintem kitolták, még nyomozom. June 3, 2025 at 7:13 AM, Khaliun/Ivancsa FA : Done June 3, 2025 at 7:15 AM, Csanálosi Gábor FA : Figyelem egy ideje, nem blokkolja a forgalmat, elmennek mellette a többiek. Nemsokára elpucoljuk onnan June 3, 2025 at 7:16 AM, Shakir (MCS) : @Khaliun/Ivancsa FA Please transfer this also. Thank you June 3, 2025 at 7:17 AM, M.Ferenc "B"Nc/Vd SL : Rendi! Köszi! June 3, 2025 at 7:25 AM, Truong : NC ca agv #6 error June 3, 2025 at 7:30 AM, Khaliun/Ivancsa FA : Solved June 3, 2025 at 7:30 AM, Csanálosi Gábor FA : @M.Ferenc "B"Nc/Vd SL ide tudsz jönni a döglött agvhez? June 3, 2025 at 7:32 AM, M.Ferenc "B"Nc/Vd SL : Megyek June 3, 2025 at 7:36 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 195 • Cathode: 212 GF NC reel Available :- • AN: 467 • CA: 451 June 3, 2025 at 7:42 AM, Shakir (MCS) : Done, Job initiated Thank you June 3, 2025 at 8:04 AM, Shakir (MCS) : @FA C1STKC71_M01/02 there is Data mismatch error. Thank you June 3, 2025 at 8:09 AM, Khaliun/Ivancsa FA : Solved June 3, 2025 at 8:18 AM, 김희래 : @FA Please check C1STKC71_P18(9025). In scs, Output H/S off. June 3, 2025 at 8:24 AM, Sazzad Bhai SKon : @FA Please check the following 11 UNK plates C1STKA72 ( 0105002, 0105202, 0105201, 0105502, 0105501, C1STKC72 (0205903, 0200706, 0100705, 0200106, 0100105, 0100203) June 3, 2025 at 8:26 AM, Sazzad Bhai SKon : @FA Magazine MC5174 is duplicated. MLC2240 (C1STKC72, 0105506) MLC4208 (C1STKC72, 0205905) please remove any of the plates and confirm their magazines. June 3, 2025 at 8:33 AM, Shakir (MCS) : @FA Please check MLC2115 at C1STKC71_P18 job has been terminated, and carrier blocking the way and Job getting delayed for VD 5-6. Thank you June 3, 2025 at 8:57 AM, Shakir (MCS) : @Csanálosi Gábor FA June 3, 2025 at 8:57 AM, 김 민성 : @FA machine Would u please check GF anode nothing field? VC09 caanot move over 50m June 3, 2025 at 8:57 AM, 김 민성 : Seem to be stuck status on the field June 3, 2025 at 8:57 AM, Csanálosi Gábor FA : Approx 5 min to arrive there June 3, 2025 at 8:58 AM, 김 민성 : Showing Traffic jam. June 3, 2025 at 9:07 AM, Csanálosi Gábor FA : Now MLC2115 is present on the port, you could generate job for them June 3, 2025 at 9:08 AM, Shakir (MCS) : Working on it June 3, 2025 at 9:11 AM, 김 민성 : Person who solve this case as the ACS, Please contact me 노칭 음극 GF ACS로 해결하신 분은 저에게 연락 부탁드립니다. June 3, 2025 at 9:12 AM, Shakir (MCS) : This message was deleted. June 3, 2025 at 9:13 AM, Shakir (MCS) : AGV05 picked up carrier MLC2115 Thank you June 3, 2025 at 9:13 AM, Csanálosi Gábor FA : Your welcome! June 3, 2025 at 9:14 AM, 김태헌 : ST conveyer P12 AGV Ready off error please check. June 3, 2025 at 9:22 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 201 • Cathode: 222 GF NC reel Available :- • AN: 456 • CA: 449 June 3, 2025 at 9:27 AM, Csanálosi Gábor FA : @Shakir (MCS) @M.Ferenc "B"Nc/Vd SL NC CA AGV #1 back in line, for now sent to charge up more. June 3, 2025 at 9:32 AM, Shakir (MCS) : @FA Please check C1STKC71 Load Oversize Error. Thank you June 3, 2025 at 9:35 AM, Csanálosi Gábor FA : Coming. FYI i took out MLA1166 from an robot 1, missing holder June 3, 2025 at 9:46 AM, 김희래 : @MCS Please check C0PVC010_P13(MC1511). Job is not created with this magazine.(There are many LR) June 3, 2025 at 9:51 AM, Sazzad Bhai SKon : There's an anode magazine there! June 3, 2025 at 9:51 AM, Shakir (MCS) : Yes, There is issue with lot, MA1511 have the Lot MA5262. Thank you June 3, 2025 at 9:51 AM, Shakir (MCS) : Anode magazine: MA5263 June 3, 2025 at 9:56 AM, Lan Nhi : @FA. Please check for me, machine #42 (5-6) and machine #20 (3-2) the robot has been putting in 2 trays for a long time but I don't see any more being put in. Please provide the remaining chamber. VD/CA Thanks. June 3, 2025 at 9:59 AM, Lan Nhi : @FA sorry. agv #8 has flipped the magazine at outline machine 3/2 An. please check for me. thanks June 3, 2025 at 10:04 AM, Csanálosi Gábor FA : @Shakir (MCS) gf nc ca agv 8 has 6 magazines, but has no job. What can you do? June 3, 2025 at 10:05 AM, Shakir (MCS) : @FA Please check C1STKA72_C01 there is travel first movement error. Thank you! June 3, 2025 at 10:06 AM, Csanálosi Gábor FA : Going there than. Agv8 first magazine is mc5271 if that helps June 3, 2025 at 10:07 AM, Csanálosi Gábor FA : Done June 3, 2025 at 10:16 AM, Shakir (MCS) : Job already assigned to P14, currently port is busy, Unload soon. Thank you June 3, 2025 at 10:16 AM, Csanálosi Gábor FA : Thank you June 3, 2025 at 10:18 AM, 김희래 : @제조(삼구 담당자분께) 안녕하세요. 양극 노칭 Robot 1호기 P13(C0PVC010_P13) 포트에 매거진 바코드 실물 확인 가능하실까요? 창고 수동 포트로 투입할때는 MC5263로 스캔했는데 로봇에서 다시 읽을땐 MA5263으로 읽혔습니다. June 3, 2025 at 10:22 AM, 이민재 : 실물 매거진 MC5263 MA5263 같이 붙어있습니다 June 3, 2025 at 10:24 AM, 이민재 : 노칭에 해당 매거진 인계하겠습니다 June 3, 2025 at 10:28 AM, 김희래 : 네 확인 감사드립니다. 음극 매거진이 섞여있어서 노칭으로 반송이 안되고있었습니다. 해당 포트에 공매거진 6개 모두 제거 부탁드립니다. June 3, 2025 at 10:43 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 202 • Cathode: 221 GF NC reel Available :- • AN: 448 • CA: 449 June 3, 2025 at 10:57 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 6-8 (#53) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 3, 2025 at 11:08 AM, Shakir (MCS) : @Manufacturing please press LR for VD CA 5-6 P03/P04as there is Half chamber situation. Thank you June 3, 2025 at 11:47 AM, Sazzad Bhai SKon : Gf, cathode notching AGV 03 is in alarm: ACS emergency June 3, 2025 at 12:01 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 209 • Cathode: 217 GF NC reel Available :- • AN: 443 • CA: 439 June 3, 2025 at 12:22 PM, 김 민성 : GF 노칭 음극 agv 5호기 Reassign 반복 중입니다. Over 20 minute June 3, 2025 at 12:33 PM, Shakir (MCS) : @Khaliun/Ivancsa FA @FA Please check AGV05 NC-AN, many time Job terminated and then created but not performing Unload command. In MCS AGV reply is Okay. Thank you June 3, 2025 at 12:36 PM, Lan Nhi : @FA plz check for me agv#4 error in NC/ An 3/2. thanks June 3, 2025 at 12:38 PM, Csanálosi Gábor FA : Checking June 3, 2025 at 1:07 PM, Csanálosi Gábor FA : @Shakir (MCS) pls delete job for agv4 and send back the magazines to stk, than i took this agv out of line June 3, 2025 at 1:08 PM, Shakir (MCS) : @FA Please check E0CNVC52_M04 there is STP-01 UP error. Also E0STKA51_B12 CV driven timeout. Thank you! June 3, 2025 at 1:09 PM, Csanálosi Gábor FA : Omw June 3, 2025 at 1:13 PM, Csanálosi Gábor FA : All done June 3, 2025 at 1:22 PM, Shakir (MCS) : Now AGV04 successfully Unloaded the mgz. Thank you June 3, 2025 at 1:22 PM, Csanálosi Gábor FA : Yup i made the orders myself, sorry, was urgent. June 3, 2025 at 1:24 PM, Shakir (MCS) : Now you can line-out the agv, its free now. June 3, 2025 at 1:26 PM, Csanálosi Gábor FA : Yup, i sent it to node where i can line out. :) June 3, 2025 at 1:31 PM, Shakir (MCS) : @FA Please check E0STKC51_M09/M10, there is Light Curtain detect error Thank you June 3, 2025 at 1:32 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 205 • Cathode: 224 GF NC reel Available :- • AN: 432 • CA: 432 June 3, 2025 at 1:41 PM, Kovács Ágnes : Solved June 3, 2025 at 1:54 PM, M.Ferenc "B"Nc/Vd SL : Please somebody June 3, 2025 at 1:56 PM, 김태헌 : 4L #6 AGV fork sw limit error please check. June 3, 2025 at 2:10 PM, Lan Nhi : @FA hello. please check agv#5 error at line 6 An. thanks June 3, 2025 at 2:11 PM, Sazzad Bhai SKon : Alarm cleared, vehicle acquiring June 3, 2025 at 2:19 PM, Lan Nhi : Thank you very much June 3, 2025 at 2:22 PM, Truong : NC CA agv #10 error please come check June 3, 2025 at 2:23 PM, Lan Nhi : The machine has another error. Please check again, thank you. June 3, 2025 at 2:27 PM, Sazzad Bhai SKon : C0NGVA01_VC05 has alarm: fork double count @FA Please check June 3, 2025 at 2:32 PM, Kovács Ágnes : Solved June 3, 2025 at 2:41 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 202 • Cathode: 221 GF NC reel Available :- • AN: 418 • CA: 427 June 3, 2025 at 2:57 PM, Shakir (MCS) : @FA Please check AGV10 NC CA, LD/UD req not received. Thank you June 3, 2025 at 3:06 PM, Csanálosi Gábor FA : Solved June 3, 2025 at 3:21 PM, 동현 : @FA Please check E0STKC51_C02 June 3, 2025 at 3:22 PM, Shakir (MCS) : @FA Please check E0STKC51_C02 there is Fork#2 SEW emergency stop. Thank you June 3, 2025 at 3:22 PM, Csanálosi Gábor FA : Yup i am here June 3, 2025 at 3:28 PM, Csanálosi Gábor FA : Solved June 3, 2025 at 3:28 PM, Shakir (MCS) : @FA Please check C1STKA72 Fork1 load position error. Thank you June 3, 2025 at 3:31 PM, Csanálosi Gábor FA : Omw June 3, 2025 at 3:33 PM, Csanálosi Gábor FA : Done June 3, 2025 at 4:11 PM, Shakir (MCS) : @FA Please check E0CNVA52_M04 there is STP-01 Up error Thank you! June 3, 2025 at 4:15 PM, Csanálosi Gábor FA : I solved that minits ago June 3, 2025 at 4:15 PM, Csanálosi Gábor FA : Ahh kakao is slow sry. :) June 3, 2025 at 4:20 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 211 • Cathode: 231 GF NC reel Available :- • AN: 407 • CA: 423 June 3, 2025 at 4:40 PM, Shakir (MCS) : @Fa @Csanálosi Gábor FA Please check RTV CA E0CNVC52 not moving, without error Thank you June 3, 2025 at 4:43 PM, 김지수PM(Gyuri)_FA : @이민재 혹시 GF순환물류 양극 M01포트 MLA6120자재 풀인지 확인 좀 해주실 수 있나요? June 3, 2025 at 4:44 PM, Kovács Ágnes : Solved June 3, 2025 at 5:18 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 213 • Cathode: 224 GF NC reel Available :- • AN: 405 • CA: 416 June 3, 2025 at 6:01 PM, Barta Rudi : @FA NC An AGV4 stop, please check, thank you June 3, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3)+1: Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 3, 2025 at 6:06 PM, Mohammad Amir : Good Evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 214 • Cathode: 228 GF NC reel Available :- • AN: 398 • CA: 410 Thank you very much! June 3, 2025 at 6:09 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.03 Time: 18:00-06:00 1. Ji Seok Beom June 3, 2025 at 6:09 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVC52_RTV01 is OOS because it is in Manual mode. Reels delivery has been affected. Thank you! June 3, 2025 at 6:11 PM, Mohammad Amir : @FA @ACS Please check NC AN AGC#5 it is blocking AGV#7 and empty magazine to line 5-1 Anode is getting delayed. Thank you very much! June 3, 2025 at 6:22 PM, Mohammad Amir : @FA @Nagy Tibor Please check this issue still exists. Thank you very! June 3, 2025 at 6:25 PM, Dariimaa/다리마/Ivancsa : Solved June 3, 2025 at 6:26 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 6:34 PM, 김현태 : NC CA AGV #10 error. Thanks June 3, 2025 at 7:01 PM, Mohammad Amir : @Manufacturing Please check MLA0167 located at C1CNV072_M01 ,for it Magazine MA2361 is not closed . Thank you very much! June 3, 2025 at 7:20 PM, 안종수 : NC AN #2 AGV ERROR. PLEASE CHECK @FA June 3, 2025 at 7:29 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD AN chamber 1-9 6-8 has only 2 materials. Please check Thank you! June 3, 2025 at 7:30 PM, Mohammad Amir : Checking June 3, 2025 at 7:31 PM, Mohammad Amir : There is an active LR from Both machines as soon as materials will be available jobs will be created for the remaining half chamber. Thank you very much! June 3, 2025 at 8:01 PM, Hồng Anh SL NC&VD 1F : Pls FA team come to mc 6/3 AN pls. Agv unload mgz all fell down June 3, 2025 at 8:01 PM, 인제(Hwang) : NC An AGV#5 An 6-3 풀매거진 배출 중 안착불량으로 매거진 전도발생 June 3, 2025 at 8:01 PM, 인제(Hwang) : @지석범PM (이반차FA) @최명운(CHOI MYOUNGWOON) June 3, 2025 at 8:27 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check E0CNVC52_RTV01 there is Data Loss Error. Reels delivery has been stopped. Thank you very much! June 3, 2025 at 8:33 PM, Dariimaa/다리마/Ivancsa : LCT0704 carrier has no destination. June 3, 2025 at 8:33 PM, Mohammad Amir : Checking June 3, 2025 at 8:36 PM, Mohammad Amir : Issue has been resolved ✅. Carrier has started to move to its destination. I am monitoring. Thank you very much! June 3, 2025 at 8:37 PM, Dariimaa/다리마/Ivancsa : Thank you! June 3, 2025 at 8:37 PM, Mohammad Amir : You are welcome! June 3, 2025 at 8:40 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV072_16_155 there is INV-01 Runtime Over error and it is blocking stacking materials delivery. Thank you very much! June 3, 2025 at 8:47 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 215 • Cathode: 245 GF NC reel Available :- • AN: 388 • CA: 369 Thank you very much! June 3, 2025 at 8:47 PM, Dariimaa/다리마/Ivancsa : Solved June 3, 2025 at 8:48 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 9:06 PM, Hồng Anh SL NC&VD 1F : Pls check for AGV 8 AN NC. June 3, 2025 at 9:16 PM, 안종수 : Please check #2 AGV NC AN June 3, 2025 at 9:23 PM, 안종수 : Please check @FA June 3, 2025 at 9:28 PM, Hồng Anh SL NC&VD 1F : MCS team pls check for Chamber #09 AN . Only half chamber in long time. Pls RL for more plate to this chamber pls. June 3, 2025 at 9:28 PM, Mohammad Amir : Checking June 3, 2025 at 9:28 PM, Hồng Anh SL NC&VD 1F : MCS team pls check for Chamber #53 AN . Only half chamber in long time. Pls RL for more plate to this chamber pls. June 3, 2025 at 9:33 PM, Hồng Anh SL NC&VD 1F : Pls check for AGv 8 AN Nc. June 3, 2025 at 9:37 PM, Mohammad Amir : There is an active LR as soon as materials will be available jobs will be created for the remaining half chamber. Thank you very much! June 3, 2025 at 9:53 PM, 안종수 : This message was deleted. June 3, 2025 at 9:53 PM, 안종수 : @Mohammad Amir Please delete NC AN 6-3 Out port P01 UR Job. Double storage occurrence. Currently, there is no full magazine in P01port. June 3, 2025 at 9:54 PM, Mohammad Amir : Sure ,Checking! June 3, 2025 at 9:55 PM, Mohammad Amir : Job has been successfully terminated ✅ Thank you very much! June 3, 2025 at 9:55 PM, 안종수 : Thank you so much June 3, 2025 at 9:55 PM, Mohammad Amir : You are most welcome! June 3, 2025 at 9:57 PM, 안종수 : #9 AGV UR JOB Please check. NC AN 6-3 OUT PORT P01 IR waiting. Please delete the job. June 3, 2025 at 9:58 PM, Mohammad Amir : Checking as well. June 3, 2025 at 9:58 PM, 안종수 : #9 AGV UR JOB Please check. NC AN 6-3 OUT PORT P01 UR waiting. Please delete the job. June 3, 2025 at 10:05 PM, Mohammad Amir : I have cancelled the Job again . Please let me know if you see job again Thank you! June 3, 2025 at 10:06 PM, Barta Rudi : @FA @Mohammad Amir Machine setup will take place on the CA 1-2 #02 VD machine. Please send the magazines to the warehouse with the AGV. Thank you. June 3, 2025 at 10:06 PM, Mohammad Amir : Checking June 3, 2025 at 10:09 PM, Mohammad Amir : Is it possible to make This VD machine in Service for while and I will create command to send it back to STK. Currently as VD machine is OOS that's why created command are not executing and job is pending. Thank you very much n June 3, 2025 at 10:14 PM, Barta Rudi : Done, it can be sent to the warehouse. June 3, 2025 at 10:14 PM, Mohammad Amir : Checking June 3, 2025 at 10:15 PM, Mohammad Amir : Please check again ,it still shows ,OOS. Thank you very much! June 3, 2025 at 10:22 PM, Mohammad Amir : Now it is in Service. I have created command to send this carrier from VD machines to Post VD STK. AGVs have assigned. ✅ I am monitoring. Thank you very much! June 3, 2025 at 10:26 PM, Barta Rudi : @Mohammad Amir The finished magazine has been in the 6-1 #46 CA VD machine for a long time. Please send an AGV to unload it. Thank you. June 3, 2025 at 10:27 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check AGV#9 AN VD ,it is in error. Thank you very much! June 3, 2025 at 10:27 PM, Mohammad Amir : Sure, Checking! June 3, 2025 at 10:27 PM, Dariimaa/다리마/Ivancsa : We are working June 3, 2025 at 10:28 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 10:29 PM, Mohammad Amir : Please confirm me which carrier actually exists at 6-1 VD CA P04 ? Thank you very much! June 3, 2025 at 10:30 PM, Mohammad Amir : @FA Please check C1CNV072_16_155 there is INV-01 Run Time over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 3, 2025 at 10:30 PM, Dariimaa/다리마/Ivancsa : We are working June 3, 2025 at 10:31 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 10:34 PM, Nguyên : NC AN GF AGV#6 Error June 3, 2025 at 10:35 PM, Dariimaa/다리마/Ivancsa : Solved June 3, 2025 at 10:35 PM, Mohammad Amir : Thank you very much! June 3, 2025 at 10:41 PM, Nguyên : VD CA GF machine 42(6-5) AGV only put 2 trays in. Please check for me. June 3, 2025 at 10:44 PM, Mohammad Amir : This issue has been resolved ✅. Thank you very much! June 3, 2025 at 10:44 PM, Mohammad Amir : I am checking June 3, 2025 at 10:47 PM, Mohammad Amir : Hello, I checked for VD CA 6-5 ,All chambers are filled with materials. P01-MLC4141 P02-MLC4151 P03-MLC4218 P04-MLC5659 Please let me know if you need any further assistance. Thank you very much! June 3, 2025 at 10:49 PM, Mohammad Amir : Hello, I have successfully transferred carrier form the mentioned VD to Post VD STK. ✅ You may start setting up the machine now. Thank you very much! June 3, 2025 at 11:01 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 249 • Cathode: 250 GF NC reel Available :- • AN: 364 • CA: 366 Thank you very much! June 3, 2025 at 11:58 PM, 김현태 : VD CA AGV #04 error. Thanks June 3, 2025 at 11:59 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check AGV#1AN NC ,it is blocking AGV#9 and because of this empty magazine delivery to line 6-2 is getting delayed. Thank you very much! June 4, 2025 at 12:01 AM June 4, 2025 at 12:01 AM, Dariimaa/다리마/Ivancsa : Solved June 4, 2025 at 12:01 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 12:38 AM, Nguyên : Pls request AGV come to chamber #32 AN for take out plate inside. We need to check chamber error. June 4, 2025 at 12:38 AM, Mohammad Amir : Checking June 4, 2025 at 12:40 AM, Mohammad Amir : I will send the carriers located inside AN VD 4-5(#32) ,but please first make it In-service afterwards carrier tranfer will be possible from MCS . Thank you very much! June 4, 2025 at 1:02 AM, Nguyên : This message was deleted. June 4, 2025 at 1:03 AM, Nguyên : Please let AGV come and get the goods for me. June 4, 2025 at 1:04 AM, Mohammad Amir : Currently Anode VD 4-5 is Out of service that's why created command from MCS will not proceed. Please make it in-service and after materials will be removed from the VD chamber by AGV after set it back to OOS and repair. Thank you very much! June 4, 2025 at 1:13 AM, Mohammad Amir : @Barta Rudi Could you please help @Nguyên in making VD AN 4-5 in -service so that I can send the carrier to Post VD STK. Thank you very much! June 4, 2025 at 1:15 AM, Barta Rudi : Done, it can be unloaded. Thank you June 4, 2025 at 1:15 AM, Mohammad Amir : Now it is in Service,Thank you very much! I have created command to send this carrier from VD machines to Post VD STK. AGVs have assigned. ✅ I am monitoring. Thank you very much! June 4, 2025 at 1:19 AM, Nguyên : VD AN GF AGV#8 Error June 4, 2025 at 1:23 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check E0STKC52_C02 there is Travel driver error. Thank you very much! June 4, 2025 at 2:00 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 264 • Cathode: 258 GF NC reel Available :- • AN: 357 • CA: 364 Thank you very much! June 4, 2025 at 2:32 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check E0CNVA52 (7029) there is Data Mismatch error. Thank you! June 4, 2025 at 2:38 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC72_C01/C02 there is Light Curtain detected error. Thank you very much! June 4, 2025 at 2:38 AM, Nguyên : CA VD GF C1STKC72-C01 C1STKC72-C02 Come check for me June 4, 2025 at 2:52 AM, Hồng Anh SL NC&VD 1F : Pls check for AGV 1 job. AGV just go around around in long time and no LR for any machine. Now this AGV bring empry mgz. June 4, 2025 at 2:52 AM, Hồng Anh SL NC&VD 1F : AN Nc pls June 4, 2025 at 2:52 AM, Mohammad Amir : Checking June 4, 2025 at 2:53 AM, Nguyên : This message was deleted. June 4, 2025 at 2:57 AM, Mohammad Amir : This AGV brings empty magazine for NC AN 5-1 based on LR received at 2:07. Because of AGV alaram there was delay. Could you please confirm so you need Empty magazine at 5-1 NC AN P03 ? Thank you very much! June 4, 2025 at 2:59 AM, Nguyên : it can't be put into the 5/1 machine. it just goes around June 4, 2025 at 2:59 AM, Mohammad Amir : Thank you very much for confirming. I am working on it. June 4, 2025 at 3:02 AM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! June 4, 2025 at 3:03 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check NC AN AGV#8 it is blocking AGV#3 and #6 cause #8 is not moving. Thank you very much! June 4, 2025 at 3:10 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV071_12_016 there is Data Mismatch error and it is blocking materials recovery. Thank you very much! June 4, 2025 at 3:11 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC71_P22 there is Auto Step time over error and it is blocking materials recovery as well for Cathode side. Thank you very much! June 4, 2025 at 3:16 AM, Dariimaa/다리마/Ivancsa : Solved June 4, 2025 at 3:17 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 3:18 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 265 • Cathode: 267 GF NC reel Available :- • AN: 351 • CA: 364 Thank you very much! June 4, 2025 at 3:20 AM, Nagy Tibor : solved June 4, 2025 at 3:20 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 3:22 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC72 _C01 it is inactive without an error and because of this there is a shortages of Cathode Stacking materials. Please check the issue on priority. Thank you very much! June 4, 2025 at 3:24 AM, 최명운(CHOI MYOUNGWOON) : Done! June 4, 2025 at 3:25 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 3:51 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check MLC2019 located at C1CNV071_13_028 it is not moving and blocking materials recovery. Everything is good from MCS side ✅. Please check physically. Thank you very much! June 4, 2025 at 3:55 AM, Mohammad Amir : @Nguyên @Manufacturing Please press LR for VD AN 6-2 P03/04 there is half chamber situation. Thank you very much! June 4, 2025 at 3:58 AM, Dariimaa/다리마/Ivancsa : Solved June 4, 2025 at 4:00 AM, Mohammad Amir : Thank you very much! June 4, 2025 at 4:35 AM, Mohammad Amir : @Manufacturing This issue still exists , Please check! Thank you very much! June 4, 2025 at 5:03 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV072_16_155 there is INV-01 Run Time over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 4, 2025 at 5:07 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 274 • Cathode: 273 GF NC reel Available :- • AN: 342 • CA: 348 Thank you very much! June 4, 2025 at 5:07 AM, Mohammad Amir : @Manufacturing This issue still exists , Please check! Thank you very much! June 4, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! 2025.06.04. FA "D" műszak: 9/13 Overtime (0):- Substitution (1): Szücs Géza Imre Sick (1):Nagy Zsolt Holiday (3): Martina Dávid, Kasztel Balázs, Hufnágel Dániel Shift change(0): ----- Elektróda(3): Oláh András, Szabadi Miklós, Kiss Balázs ----- Assembly GF(2): Novák Károly, Zsurbej Zsolt ----- Assembly 1F(2): Kovács Szabolcs, Novák Zoltán ----- Form+Modul(2): Nagy Gábor, Magyar Balázs June 4, 2025 at 6:45 AM, Jun(정우준)_SKOH FA : Day shift FA Schedule Date: 2025.06.04 Time: 06:00~18:00 1. Jeong WooJun PM 정우준 2. Samkoo Lee minjae Köszönöm szépen June 4, 2025 at 7:01 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 278 • Cathode: 273 GF NC reel Available :- • AN: 341 • CA: 340 June 4, 2025 at 7:40 AM, Shakir (MCS) : @FA Please check LTC1251 located at E0CNVC52_09_008 it is not moving after port OOS to Inservice and blocking other job. Everything is good from MCS side. Thank you June 4, 2025 at 7:48 AM, Szabolcs : Ok, I check June 4, 2025 at 7:57 AM, Szabolcs : Done June 4, 2025 at 8:14 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 286 • Cathode: 285 GF NC reel Available :- • AN: 343 • CA: 340 June 4, 2025 at 8:26 AM, Simon Dávid D SL NC : @FA hello NC AN #1 AGV error ,megnéznétek köszönöm June 4, 2025 at 8:26 AM, Sazzad Bhai SKon : @FA MLA3074 is duplicated in two locations. UNKDUP-MLA3074-A (C1STKA72, 0205705) UNKDUP-MLA3074-B (C1STKA72, 0105001) June 4, 2025 at 9:10 AM, Shakir (MCS) : @Fa Please check Run time over error E0CNVC51_08_052/053 Thank you June 4, 2025 at 9:15 AM, Shakir (MCS) : @FA Please check LTA1014 located at E0CNVA52_M02 it is not moving. CCS has job but RTV not moving. Thank you June 4, 2025 at 9:20 AM, Shakir (MCS) : @Khaliun/Ivancsa FA Please check AGV03, NC AN, idle Thank you June 4, 2025 at 9:28 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 298 • Cathode: 287 GF NC reel Available :- • AN: 350 • CA: 352 June 4, 2025 at 10:10 AM, Koncz Tamás : AN reel raktárnál külsős kivitelező cég ajtót telepít! szendvicspanel kivágásáig a NC és VD közötti dupla üveges ajtó le lesz zárva! illetve rövid időre az ANSTK51 le lesz állítva! köszönettel FA Team. June 4, 2025 at 10:10 AM, Koncz Tamás : An external construction company is installing a door at the AN reel warehouse! The double-glazed door between NC and VD will be closed until the sandwich panel is cut out! and the ANSTK51 will be shut down for a short time! Thanks FA Team. June 4, 2025 at 10:11 AM, Koncz Tamás : @Lajos Tihor June 4, 2025 at 11:34 AM, Shakir (MCS) : @FA Please check C1CNV072_P05/P06 is OOS, Jobs are pending. Thank you June 4, 2025 at 11:38 AM, Novák Károly F. A. : Checking June 4, 2025 at 11:38 AM, Shakir (MCS) : Solved June 4, 2025 at 2:17 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 292 • Cathode: 288 GF NC reel Available :- • AN: 384 • CA: 398 June 4, 2025 at 3:15 PM, Shakir (MCS) : @Fa Please check Run time over error C1CNV072_16_159/155 Thank you June 4, 2025 at 3:30 PM, Novák Károly F. A. : Checking June 4, 2025 at 3:33 PM, Novák Károly F. A. : Solved June 4, 2025 at 5:31 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 299 • Cathode: 291 GF NC reel Available :- • AN: 389 • CA: 438 June 4, 2025 at 5:44 PM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.04 Time:18:00~06:00 Baek Hojong 전극 조성준 (Cho Sung Jun) GF 최명운 (CHOI Myoungwoon) 1F 김정희 (Kim jeong hul) June 4, 2025 at 5:46 PM, Jun(정우준)_SKOH FA : GF ST 가동 시 필히 공유 부탁드립니다. June 4, 2025 at 6:12 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 10 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Gégény Dávid Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Fabricius Gergő ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 4, 2025 at 6:31 PM, 인제(Hwang) : GF NC An 1,2,3라인 AGV 티칭 작업 중으로 알고 있습니다. 현지 테크니션이 전부 원점 후 재가동하려고 하는데 2,3라인 작업 완료된 건가요? June 4, 2025 at 6:34 PM, KIM SEYEON [김세연]_FA : 현지 테크니션이 ㄴ 유럽조립인가요? ㄴ 이반차FA인가요? June 4, 2025 at 6:35 PM, 인제(Hwang) : FA테크니션입니다 헝가리 June 4, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs today GF NC AN 1.2.3 LINE AGV re teaching work. vendor will inform you when finished. please don't operate notching agv. June 4, 2025 at 6:38 PM, Farkas Tamàs : Ok June 4, 2025 at 6:40 PM, 최명운(CHOI MYOUNGWOON) : 현지(헝가리)테크니션은 다른것 확인 중이였다고 합니다 June 4, 2025 at 6:45 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 금일 야간에 FA쪽에서 준비되면 노칭 생산 부탁드립니다. 스택 생산 시작하고, 노칭기에 공매거진 채워놓고 시작하려고 합니다. 내부 공유 부탁드립니다. June 4, 2025 at 6:47 PM, KIM SEYEON [김세연]_FA : @FA @Farkas Tamàs anyone work at CA reel storage 51 Crane? It is inactive. 혹시 릴창고 양극 51번 일부러 인액티브 해놓은 상태일까요? June 4, 2025 at 6:50 PM, Farkas Tamàs : already done June 4, 2025 at 7:46 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 June 4, 2025 at 7:56 PM, Dariimaa/다리마/Ivancsa : Solved June 4, 2025 at 7:57 PM, VK (mcs) : Is there any reason why carrier on the RTV doesn’t move. June 4, 2025 at 7:57 PM, VK (mcs) : LTC1266 June 4, 2025 at 7:57 PM, Dariimaa/다리마/Ivancsa : LTC1266 carrier has no destination June 4, 2025 at 7:59 PM, VK (mcs) : It had destination to STK C51 but after loading on RTV, we received transfer completed report. June 4, 2025 at 8:01 PM, Dariimaa/다리마/Ivancsa : Can you create new jobs? June 4, 2025 at 8:02 PM, VK (mcs) : It doesn’t work. Most probably have PLC issue. June 4, 2025 at 8:03 PM, Dariimaa/다리마/Ivancsa : I transferred STK 51. June 4, 2025 at 8:04 PM, VK (mcs) : Thanks June 4, 2025 at 8:49 PM, Baek Hojong(백호종)FA : @인제(Hwang) @심재훈 @KIM SEYEON [김세연]_FA GF노칭 양음극 설비 공매거진 플레이트 각각 36개 채우고 전창고에도 36개 공매거진플레이트 확보하고 노칭설비 생산시작입니다 레디 다 된상태에서 말씀드리면 생산 시작해주시면 감사하겠습니다 June 4, 2025 at 9:22 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 상기와 같이 준비되면 FA에서 노칭 레디신호 드리겠습니다. June 4, 2025 at 10:20 PM, Diana : Hello. Problem with AGV 7 on the 3 line stacking does not want to go June 4, 2025 at 10:21 PM, F.A.briczius Gergő : Now it's moving June 4, 2025 at 11:53 PM, VK (mcs) : @FA Please check Anode Post-STK A72 port 21 (12004) It’s out of service. June 4, 2025 at 11:54 PM, VK (mcs) : @FA Please check Cathode reel STK C51-C01 Load oversize error. June 5, 2025 at 12:10 AM June 5, 2025 at 12:10 AM, 최명운(CHOI MYOUNGWOON) : That’s enough. June 5, 2025 at 12:12 AM, Baek Hojong(백호종)FA : @VK (mcs) C1STKA71 Why doesn't the empty material go out as a notching? June 5, 2025 at 12:14 AM, VK (mcs) : Checking June 5, 2025 at 12:17 AM, VK (mcs) : All ports are occupied. Carriers are waiting for Full material in Gantry June 5, 2025 at 12:19 AM, VK (mcs) : @FA Please check it this issue still not solved. Thx June 5, 2025 at 12:22 AM, F.A.briczius Gergő : The NC machines are not working. The ports have missing full magazines. June 5, 2025 at 12:23 AM, Dariimaa/다리마/Ivancsa : Solved June 5, 2025 at 12:25 AM, VK (mcs) : I didn’t understand. Do you mean Full MGZ is not transferring ? June 5, 2025 at 12:28 AM, F.A.briczius Gergő : Yes, because the NC machines are stoped. Every NC port is missing at least 1 full magazine to be able to carry an AGV June 5, 2025 at 12:34 AM, F.A.briczius Gergő : New information: production has stopped because they are waiting for at least 36 empty plates to accumulate in the warehouse to avoid intermittent downtime. June 5, 2025 at 1:11 AM, T. Gàbornè C SL NC : @Fa Please check CA AGV #2 Thanks June 5, 2025 at 1:13 AM, Dariimaa/다리마/Ivancsa : Solved June 5, 2025 at 1:44 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) C1CNV072_PS5 MLA3048 is not moving. June 5, 2025 at 1:45 AM, VK (mcs) : Pre-destination port was occupied. Now it will move June 5, 2025 at 2:08 AM, 인제(Hwang) : NC An 인포트 공매거진 확보완료 전창고 36플레이트 확보완료, 정상가동 시작합니다 June 5, 2025 at 2:12 AM, Baek Hojong(백호종)FA : 네 노칭음극 생산 시작하시면 될듯합니다 June 5, 2025 at 2:28 AM, QuangPhan : Hello! @FA Nc AN AGV #9 error. Thanks June 5, 2025 at 3:03 AM, Baek Hojong(백호종)FA : @인제(Hwang) 노칭 양극 현장 확인해보니 생산 시작하시거 맞죠 June 5, 2025 at 3:04 AM, 최명운(CHOI MYOUNGWOON) : 네 방금 시작했다고 합니다 June 5, 2025 at 4:17 AM, 김현태 : NC CA AGV #10 error. Thanks June 5, 2025 at 4:18 AM, F.A.briczius Gergő : I am going June 5, 2025 at 4:19 AM, Dariimaa/다리마/Ivancsa : Solved June 5, 2025 at 4:42 AM, Olena Katerynchuk : 1 line #17 STK, please check AGV station. The CA material call button does not work. Thanks. June 5, 2025 at 5:06 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) C1CNV072_PN1 MLC4132 is not moving. June 5, 2025 at 5:08 AM, VK (mcs) : Now it’s moving June 5, 2025 at 5:09 AM, Debreczeni Ármin : @VK (mcs) can you share lot quantity thank you June 5, 2025 at 5:10 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 25 • Cathode: 16 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 167 • Cathode: 193 GF NC reel Available :- • AN: 328 • CA: 478 June 5, 2025 at 5:28 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.05 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 5, 2025 at 5:56 AM, Shakir (MCS) : @FA Please check E0CNVC52_09_006 there is Data Loss Error and RTV: Run time over error. Thank you June 5, 2025 at 6:16 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 5, 2025 at 6:28 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 10 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 142 • Cathode: 167 GF NC reel Available :- • AN: 315 • CA: 462 June 5, 2025 at 6:47 AM, Shakir (MCS) : @FA Please check E0CNVC52_09_008/M08 there is Run time over error. Thank you June 5, 2025 at 6:52 AM, Novák Károly F. A. : This message was deleted. June 5, 2025 at 6:56 AM, Novák Károly F. A. : Solved June 5, 2025 at 7:18 AM, Shakir (MCS) : @Manufacturing Please press LR for VD AN 6-8 P03/04 there is half chamber situation. Thank you June 5, 2025 at 7:28 AM, Simon Dávid D SL NC : @Shakir (MCS) hello GF NC CA 51 reel raktárból nem jönnek a reelek,megnßnéd köszönöm June 5, 2025 at 7:31 AM, Shakir (MCS) : There are several jobs for crane, it’s Busy now, I am increasing priority for reel CA. Thank you June 5, 2025 at 7:43 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 5, 2025 at 7:43 AM, Shakir (MCS) : @Zsurbej Zsolt F.A. June 5, 2025 at 7:47 AM, 민수 left this chatroom. June 5, 2025 at 7:52 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 07 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 118 • Cathode: 147 GF NC reel Available :- • AN: 300 • CA: 442 June 5, 2025 at 7:52 AM, 원재 : @FA NC AN 1-3 Please check AGV Don't move mgz June 5, 2025 at 8:03 AM, Ivan Chobitko : @fa Please check AGV4 Always stuck near Line 6 ST7 June 5, 2025 at 8:10 AM, Shakir (MCS) : @FA Please Check AGV08, NC AN : fork1 LD fail count. June 5, 2025 at 8:20 AM, N.Zoli F.A. : C3NCA030_P01 please cancel the order, there are 4 full magazines, the machine is not producing. June 5, 2025 at 8:23 AM, Shakir (MCS) : Job Cancelled , Thanks June 5, 2025 at 8:23 AM, N.Zoli F.A. : Thank you June 5, 2025 at 9:01 AM, Shakir (MCS) : @FA @N.Zoli F.A. Please check E0STKA52, Disconnected, not online. Thank you June 5, 2025 at 9:09 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 118 • Cathode: 140 GF NC reel Available :- • AN: 205 • CA: 406 June 5, 2025 at 9:11 AM, Novák Károly F. A. : Checking June 5, 2025 at 9:17 AM, Shakir (MCS) : @FA Please check C1STKA71_P16/15 there is Light curtain error. Thank you June 5, 2025 at 9:17 AM, Szabolcs : Checking June 5, 2025 at 9:23 AM, 최정한.KOVA : VD CA 3-7 챔버 알람 정지. 건조전 매거진 AGV 반송해주세요. June 5, 2025 at 9:51 AM, Shakir (MCS) : @FA Please check E0STKA52 “MCP Safety relay off” Thanks June 5, 2025 at 10:02 AM, Lika : Hello, 5 line #13 machine, does not take cathode stores from the morning June 5, 2025 at 10:03 AM, Sazzad Bhai SKon : The job was terminated due to destination interlock error. June 5, 2025 at 10:06 AM, Shakir (MCS) : No UR from C5STM130_P01, Press UR. June 5, 2025 at 10:08 AM, Lika : C6STM050_P02 line 5 #5 error, creates a traffic jam June 5, 2025 at 10:10 AM, Shakir (MCS) : Now moving, clear traffic June 5, 2025 at 10:15 AM, Shakir (MCS) : @FA C1STKC71_M01 there is Data mismatch error. Thank you June 5, 2025 at 10:31 AM, Shakir (MCS) : @Fa Please check C1CNV072_16_144 data mismatch error. Thank yiu June 5, 2025 at 10:34 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 83 • Cathode: 127 GF NC reel Available :- • AN: 186 • CA: 388 June 5, 2025 at 10:35 AM, Zulaa/졸라/Ivancsa FA : @MCS Please cancel the operation of VD CA chamber 2-1. The chamber door is closed. June 5, 2025 at 10:37 AM, Shakir (MCS) : Job Cancelled, Thanks June 5, 2025 at 10:42 AM, Shakir (MCS) : @FA Still E0STKA52 non operational since 8:50. Is there any maintenance going on ? Carriers are waiting. Thank you June 5, 2025 at 10:43 AM, Novák Károly F. A. : Already being repaired by Korean technicians June 5, 2025 at 11:12 AM, Shakir (MCS) : @FA Please check C1STKC72_P10 Light curtain detect error. Thank you June 5, 2025 at 11:12 AM, Shakir (MCS) : @FA C1CNV072_M02, data mismatch error. June 5, 2025 at 11:30 AM, Shakir (MCS) : @Manufacturing Please press LR for VD CA 5-3 P03/04 there is half chamber situation. Thank you June 5, 2025 at 11:34 AM, Shakir (MCS) : @FA @N.Zoli F.A. Please check E0STKC52, Disconnected, not online. Thank you June 5, 2025 at 11:41 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 17 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 84 • Cathode: 119 GF NC reel Available :- • AN: 178 • CA: 365 June 5, 2025 at 11:43 AM, Elena SL : Hello 👋 all @FA please check . They don't take away empty cathode magazines. The problem has been going on since this morning until now. ST 13 Line 6 June 5, 2025 at 11:49 AM, Shakir (MCS) : Could you please tell me the carrier id at P01 ST 13 June 5, 2025 at 11:50 AM, Shakir (MCS) : Problem because of UR carrier location mismatch. June 5, 2025 at 11:53 AM, Shakir (MCS) : Is this carrier MLC4234 at P01? In MCS the current location of carrier is at STKC72. June 5, 2025 at 11:53 AM, Elena SL : Now I check June 5, 2025 at 12:02 PM, Elena SL : Yes it's her. take her please June 5, 2025 at 12:08 PM, Shakir (MCS) : Press UR, June 5, 2025 at 12:26 PM, Sazzad Bhai SKon : Please confirm if MLC4234 is on stacking line 6 -13 P01. According to log this should be on post VD STK. June 5, 2025 at 12:27 PM, KIM SEYEON [김세연]_FA : @FA please check CA post vd Crane load oversize alarm June 5, 2025 at 12:29 PM, Sazzad Bhai SKon : Hello pm, door is open. Probably they're working on it June 5, 2025 at 12:29 PM, Novák Károly F. A. : Checking June 5, 2025 at 12:35 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 78 • Cathode: 124 GF NC reel Available :- • AN: 259 • CA: 360 June 5, 2025 at 12:42 PM, Elena SL : Done ✔️ June 5, 2025 at 12:54 PM, Simon Dávid D SL NC : @FA hello NC AN 5/1 mgz lift error,megnéznétek köszönöm June 5, 2025 at 12:54 PM, Novák Károly F. A. : Megyek June 5, 2025 at 12:59 PM, Novák Károly F. A. : Kész June 5, 2025 at 1:03 PM, Lika : C4STM090_P01 line 4 #9 error, creates a traffic jam June 5, 2025 at 1:12 PM, Shakir (MCS) : @Zulaa/졸라/Ivancsa FA Please transfer to STK, one plate remaining inside VD AN 2-2. Thank you June 5, 2025 at 1:13 PM, Shakir (MCS) : Press LR for 6-8 AN Half Chamber June 5, 2025 at 1:17 PM, Shakir (MCS) : @Manufacturing Press LR for VD CA 5-3_P03,P04 Half chamber. Thank you June 5, 2025 at 1:21 PM, Sazzad Bhai SKon : @FA C1STKA72 P07/08 repeatedly going to oos. Please check June 5, 2025 at 1:29 PM, Novák Károly F. A. : Checking June 5, 2025 at 1:36 PM, Shakir (MCS) : @FA Please check E0STKA51_P02/P01, INV-01 Ready off Error. Thank you June 5, 2025 at 1:36 PM, Novák Károly F. A. : Checking June 5, 2025 at 1:37 PM, Novák Károly F. A. : Done June 5, 2025 at 1:44 PM, Novák Károly F. A. : The warehouse is working again. June 5, 2025 at 1:54 PM, Jun(정우준)_SKOH FA : @Shakir (MCS) Please set the GF ST CV P29, P30 ports to OOS. There is currently a problem with the ports, so they need to be checked. thank you so much. June 5, 2025 at 1:56 PM, Shakir (MCS) : Done, Both ports are OOS now, Please inform us if you want INSERVICE. Thank you June 5, 2025 at 2:07 PM, Jun(정우준)_SKOH FA : can you make inservice? June 5, 2025 at 2:08 PM, Shakir (MCS) : Working on it June 5, 2025 at 2:08 PM, Jun(정우준)_SKOH FA : thanks June 5, 2025 at 2:11 PM, Shakir (MCS) : Both ports are inservice now. June 5, 2025 at 2:12 PM, 원재 : @KIM SEYEON [김세연]_FA 안녕하세요 gf 노칭담당 임원재 주임입니다. 현재 노칭 음극5-1설비 아웃포트에 Novák Károly F.A 가 설비정지 Tag를 달아놓고 설비에 문제가 있다고 김세연 pm님이 세우라고 했다고합니다. 저는 들은 내용이 없는데 어떤 이유로 설비에 문제가 있어서 세우는건지 알수있을까요? June 5, 2025 at 2:16 PM, KIM SEYEON [김세연]_FA : 세우지 않으셔도 됩니다. June 5, 2025 at 2:16 PM, KIM SEYEON [김세연]_FA : 지금 아웃포트 알람이 있나요? June 5, 2025 at 2:19 PM, Simon Dávid D SL NC : @FA hello NC Ca #7 AGV error,megnéznétek köszönöm June 5, 2025 at 2:19 PM, 원재 : 아니요 알람문제는 없었습니다. 단순 LR alram은 FA에서 수동으로 Mgz 투입했고 정상작동가능합니다만, Novák Károly F.A 가 김세연pm님이 설비정지하라고 했다하여 이유를 물으니 전극문제가 있다라고 합니다만 외관상이나 딱히 문제점이 보이지않아 문의드렸습니다. 가동해도 될까요? June 5, 2025 at 2:20 PM, KIM SEYEON [김세연]_FA : 아까 그 설비에서 알람이 있어서 같이 리셋했을뿐입니다. 전극 문제있다고 한적은 없습니다. 가동해도 됩니다. June 5, 2025 at 2:21 PM, 원재 : 네 정상가동하겠습니다 June 5, 2025 at 2:22 PM, Jun(정우준)_SKOH FA : can you make it OOS again!? June 5, 2025 at 2:22 PM, Shakir (MCS) : No, June 5, 2025 at 2:22 PM, Shakir (MCS) : But it showing now OOS suddenly June 5, 2025 at 2:24 PM, Shakir (MCS) : It is Light curtain error alarm June 5, 2025 at 2:32 PM, 김희래 : @Sazzad Bhai SKon Please check MLA1084. It was in C1CNV072_PS1, and transportjob was not started(reply was success). So it solved with op action. Please check why transfer was not started. Thank you! June 5, 2025 at 2:47 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 12 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 56 • Cathode: 108 GF NC reel Available :- • AN: 234 • CA: 316 June 5, 2025 at 3:02 PM, Sazzad Bhai SKon : Temporarily the virtual CNV (VNV) was not in-service June 5, 2025 at 3:13 PM, 김희래 : Can you tell me which vnv was not inservice?(ex.C1VNVA76) June 5, 2025 at 3:28 PM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M02 now there are 1+2 carriers waiting. Thank you June 5, 2025 at 3:47 PM, Shakir (MCS) : This message was deleted. June 5, 2025 at 3:51 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 02 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 62 • Cathode: 115 GF NC reel Available :- • AN: 228 • CA: 305 June 5, 2025 at 4:12 PM, Ivan Chobitko : @fa Check please L6 ST19 AGV fork place abnormal June 5, 2025 at 4:56 PM, Shakir (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 5, 2025 at 5:23 PM, Zulaa/졸라/Ivancsa FA : @Manufacturing Pleace check VD AN chamber 4-2. The door is partially closed. June 5, 2025 at 5:24 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 44 • Cathode: 113 GF NC reel Available :- • AN: 214 • CA: 274 June 5, 2025 at 5:44 PM, Simon Dávid D SL NC : @FA hello NC Ca #3 robot error ,megnéznétek köszönöm June 5, 2025 at 5:46 PM, Mohammad Amir : @FA Please check C1STKC71_C01 there is PIO complete on error and because of this there is a traffic of recovery materials. Thank you very much! June 5, 2025 at 5:54 PM, Baek Hojong(백호종)FA : Night shift 06.05. 18:00-06:00 Baek Hojong 백호종 PM 송태용 Song Taeyong Elec 김종원 Kim Jong Won Assy (1F） 오은향 OH EUN HYANG Assy(GF) June 5, 2025 at 6:01 PM, Farkas Tamàs : Jó estét FA Iváncsa "C" shift (18:00-6:00) 10 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(2) Csuti Zoltán Gégény Dávid ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 5, 2025 at 6:03 PM, Khaliun/Ivancsa FA : @Fe techNC CA ROBOT#3 error pls check June 5, 2025 at 6:04 PM, Mohammad Amir : @FA @Csuti Zoltán F.A Please check this issue it still exists. Thank you! June 5, 2025 at 6:05 PM, Gégény Dávid : I am going June 5, 2025 at 6:15 PM, Gégény Dávid : Done June 5, 2025 at 6:33 PM, Mohammad Amir : Good Evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 43 • Cathode: 114 GF NC reel Available :- • AN: 211 • CA: 253 Thank you very much! June 5, 2025 at 6:36 PM, Mohammad Amir : @Gégény Dávid Please check C1STKC71_C02 it is inactive without errors and that's why there is a queue of recovery materials. Thank you! June 5, 2025 at 6:42 PM, Mohammad Amir : @FA @Csuti Zoltán F.A Please check E0STKA52_C01/C02 there is Area Sensor Detected Error. Thank you! June 5, 2025 at 6:42 PM, Csuti Zoltán F.A : Ok June 5, 2025 at 6:48 PM, T. Gàbornè C SL NC : Helló @Fa Please check CA robot #1 Robot movement error Thank you for much June 5, 2025 at 6:51 PM, 최종건 : @Mohammad Amir When a carrier arrived at the circulation CNV and the ID READ was processed normally, but the carrier did not move today because MCS could not give an order to CCS. Please monitor intensively to see if the same phenomenon recurs at night. June 5, 2025 at 6:53 PM, Mohammad Amir : Good Evening Sir, Sure Sir,I am giving extra attention to the issue. Thank you very much! June 5, 2025 at 7:10 PM, Gégény Dávid : Kész June 5, 2025 at 7:29 PM, Khaliun/Ivancsa FA : @MCS NC CA AGV#5 idle pls check June 5, 2025 at 7:30 PM, Mohammad Amir : Checking June 5, 2025 at 7:32 PM, Mohammad Amir : Issue has been resolved ✅. AGV has started to move. Thank you! June 5, 2025 at 7:33 PM, Khaliun/Ivancsa FA : Thank you. June 5, 2025 at 7:33 PM, Mohammad Amir : You are welcome! June 5, 2025 at 7:53 PM, T. Gàbornè C SL NC : Hello @Fa Please check CA AGV #10 Thanks June 5, 2025 at 7:53 PM, Gégény Dávid : Megyek June 5, 2025 at 8:12 PM, T. Gàbornè C SL NC : Hello @Fa Please check CA AGV #1 Thanks June 5, 2025 at 8:13 PM, Gégény Dávid : Megyek June 5, 2025 at 8:18 PM, QuangPhan : Hello! @FA NC AN 4/1 AGV #6 error. Thanks June 5, 2025 at 8:20 PM, Gégény Dávid : @Khaliun/Ivancsa FA June 5, 2025 at 8:24 PM, Gégény Dávid : Done June 5, 2025 at 8:29 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 17 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 06 • Cathode: 81 GF NC reel Available :- • AN: 206 • CA: 244 Thank you very much! June 5, 2025 at 9:08 PM, Mohammad Amir : @Khaliun/Ivancsa FA @FA Please check MA6130 located at C0PVA010_P13 ,it has job to deliver empty magazine to 3-2 NC AN. However AGV is not being assigned for quite along time that's why empty magazine delivery is getting delayed. Everything is good from MCS RTD side ✅. Thank you! June 5, 2025 at 9:18 PM, Mohammad Amir : @FA @Gégény Dávid Please check ECNVA52_M04 there is STP-01 Up error. Thank you! June 5, 2025 at 9:20 PM, Mohammad Amir : @FA @Gégény Dávid Please also check C1STKA71_C02 there is Port Interface Error. Thank you very much! June 5, 2025 at 9:26 PM, Mohammad Amir : This message was deleted. June 5, 2025 at 9:31 PM, Mohammad Amir : @FA Please check ECNVA52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 5, 2025 at 9:33 PM, Mohammad Amir : @FA Please check this issue ,it still exists. Thank you very much! June 5, 2025 at 9:36 PM, Gégény Dávid : Done June 5, 2025 at 9:36 PM, Mohammad Amir : Thank you very much! June 5, 2025 at 10:25 PM, 정은탁 (Jung EunTak) : @FA NC An 2-1 Full Magazine 12EA In Port, But AGV Not UR. Please Check. June 5, 2025 at 10:25 PM, Mohammad Amir : @FA @Gégény Dávid Please check E0STKC51_C01/C02 ,these carnes are Inactive and because of this reels delivery has been affected. Please check this issue on priority. Thank you very much! June 5, 2025 at 10:26 PM, Mohammad Amir : Checking June 5, 2025 at 10:29 PM, Mohammad Amir : @FA Please check C2NCA010_P02 there is Manufacture Normal Sticking detection time is over Alarm since 21:52. Please clear it. Thank you very much! June 5, 2025 at 10:31 PM, 이도형 (Lee) : @FA VD An #10 AGV is stopped. Please check. June 5, 2025 at 10:31 PM, Mohammad Amir : @Baek Hojong(백호종)FA Dear Sir, Please check this issue because of this Reels delivery has been affected and Production is getting affected. Thank you very much! June 5, 2025 at 10:32 PM, 이도형 (Lee) : @FA VD An #9 AGV is stopped. Please check. June 5, 2025 at 10:32 PM, 이도형 (Lee) : @FA VD An C1STKA72 is stopped. Please check. June 5, 2025 at 10:34 PM, Mohammad Amir : Sir, As I checked C1STKA72_C01/C02 are active last transfer took place at 22:33. Thank you very much! June 5, 2025 at 10:36 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1STKA72_P14/P13 there is light curtain-01 error. Thank you! June 5, 2025 at 10:37 PM, Mohammad Amir : @FA @Gégény Dávid Please now check C1STKA72_C01 there is Travel First Movement error on 22:36. Thank you very much! June 5, 2025 at 10:38 PM, QuangPhan : Dear @FA AN VD 2_7 #14 stopped lost the light above Please send mgz warehouse A72, the technicians repair machine start. Thank you. June 5, 2025 at 10:38 PM, Mohammad Amir : Checking June 5, 2025 at 10:39 PM, Mohammad Amir : Currently Anode VD 2-7 is Out of service that's why created command from MCS will not proceed. Please make it in-service and after materials will be removed from the VD chamber by AGV after set it back to OOS and repair. Thank you very much! June 5, 2025 at 10:44 PM, QuangPhan : Thank you June 5, 2025 at 10:45 PM, 정은탁 (Jung EunTak) : This message was deleted. June 5, 2025 at 10:47 PM, 정은탁 (Jung EunTak) : @FA NC Ca 2-3 AGV #5 Error. Please Check. June 5, 2025 at 10:49 PM, Khaliun/Ivancsa FA : Solved June 5, 2025 at 11:05 PM, QuangPhan : Done. has been put in In-Service status June 5, 2025 at 11:05 PM, Mohammad Amir : Now it is in Service,Thank you very much! I have created command to send this carrier from VD machines to Post VD STK. AGVs have assigned. ✅ I am monitoring. Thank you very much! June 5, 2025 at 11:07 PM, QuangPhan : Thank you June 5, 2025 at 11:07 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 57 • Cathode: 03 Pre STK > VD • Anode: 13 • Cathode: 04 Post STK > Stacking • Anode: 00 • Cathode: 94 GF NC reel Available :- • AN: 216 • CA: 241 Thank you very much! June 5, 2025 at 11:07 PM, Mohammad Amir : You are welcome! June 5, 2025 at 11:13 PM, Mohammad Amir : @FA @Gégény Dávid Please check E0STKC51_C01 there is Load Oversize Error. Thank you! June 5, 2025 at 11:14 PM, Gégény Dávid : under repair June 5, 2025 at 11:14 PM, Mohammad Amir : Also please check @FA, E0STKC52_C02 there is MCP Mode error. Thank you! June 5, 2025 at 11:14 PM, Mohammad Amir : Thank you very much for the information! June 5, 2025 at 11:16 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1CNV072_16_159/155 there is INV-01 Run Time over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 5, 2025 at 11:28 PM, Mohammad Amir : @FA @Gégény Dávid Please check this issue,it still exists ,there is a shortages of stacking materials on line 4&5&6. Please check the issue on priority. Thank you very much! June 5, 2025 at 11:30 PM, Gégény Dávid : I am watching. June 5, 2025 at 11:30 PM, Mohammad Amir : Thank you very much 🙏 June 5, 2025 at 11:35 PM, T. Gàbornè C SL NC : @MCS Hello Please check CA reel Storage #51, #52 the Reel edition slowed down. Thank you for much. June 5, 2025 at 11:35 PM, Mohammad Amir : Checking June 5, 2025 at 11:37 PM, T. Gàbornè C SL NC : @FA Hello CA VD 4-7 no start. Please send the plate storege, after technicians check the machine. Thank you for much. June 5, 2025 at 11:37 PM, Mohammad Amir : Checking June 5, 2025 at 11:38 PM, Mohammad Amir : Jobs have been created successfully to transfer these carriers to Post VD STK. ✅. Thank you very much! June 5, 2025 at 11:39 PM, Mohammad Amir : Issue has been resolved ✅ You will start receiving the reels soon. I am monitoring. Thank you very much! June 5, 2025 at 11:40 PM, T. Gàbornè C SL NC : Thx June 5, 2025 at 11:40 PM, T. Gàbornè C SL NC : Thx June 5, 2025 at 11:41 PM, Mohammad Amir : You are welcome! June 5, 2025 at 11:44 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check MLC1202 located at C1CNV072_16_123 it is not moving and blocking materials stacking delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! June 5, 2025 at 11:45 PM, Khaliun/Ivancsa FA : Yes, I work here. June 5, 2025 at 11:45 PM, Mohammad Amir : Thank you very much 🙏 June 5, 2025 at 11:47 PM, Mohammad Amir : @QuangPhan For your information:- As you requested,I have transferred all the carriers from the AN VD 2-7 to Post VD STK. ✅ You may set the Machine to OOS now and start repairing. Thank you very much! June 5, 2025 at 11:48 PM, Mohammad Amir : @FA @Gégény Dávid Please check E0CNVA52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 5, 2025 at 11:49 PM, Farkas Tamàs : is currently working on it June 5, 2025 at 11:49 PM, Mohammad Amir : Thank you very much 🙏 June 5, 2025 at 11:53 PM, Dima Kusyk : @MCS @FA Good evening, everyone! Could you please check the supply of anode material from NC > VD and VD > STK? There might be some issues, as the delivery of anode material to STK is currently delayed. June 5, 2025 at 11:57 PM, Mohammad Amir : This message was deleted. June 5, 2025 at 11:58 PM, Mohammad Amir : Good Evening, Unfortunately there is very less only 5 materials available at the moment before it was 0 and on the top of that there was issue with C1CNV072 ,All these issues together cuaeed shortages of Anode materials in Stacking. Now everything is fine ✅ I am monitoring. Thank you! June 5, 2025 at 11:59 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 6, 2025 at 12:08 AM June 6, 2025 at 12:08 AM, Mohammad Amir : For you information:- Currently available Stacking materials:- **Anode -00** Cathode -78 Unfortunately again Anode materials is not available you might face shortages of Anode materials again. Thank you very much! June 6, 2025 at 12:10 AM, Mohammad Amir : @Manufacturing Please take action on it,now there are 1+3 carriers waiting,it is decreasing stacking materials delivery speed. Thank you very much! June 6, 2025 at 12:12 AM, Khaliun/Ivancsa FA : I work here. Thank you. June 6, 2025 at 12:12 AM, Mohammad Amir : Thank you very much 🙏 June 6, 2025 at 12:24 AM, Mohammad Amir : @FA @Gégény Dávid Please check E0STKA52_C01 there is Ready off during Forking error. Thank you! June 6, 2025 at 1:04 AM, P.Bence A SSL : L6 stacking Agv 4 stop please check thank you June 6, 2025 at 1:16 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 108 • Cathode: 00 Pre STK > VD • Anode: 09 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 64 GF NC reel Available :- • AN: 189 • CA: 215 Thank you very much! June 6, 2025 at 1:17 AM, Mohammad Amir : @FA Please confirm,Are you working on E0STKA52? It is still OOS. Thank you very much! June 6, 2025 at 1:23 AM, Farkas Tamàs : is currently working on it June 6, 2025 at 1:24 AM, T. Gàbornè C SL NC : @FA Hello CA VD 1-2 no start. Please send the plate storege, after technicians check the machine. Thank you for much. June 6, 2025 at 1:24 AM, Mohammad Amir : Checking June 6, 2025 at 1:25 AM, Mohammad Amir : Currently Cathode VD 1-2 is Out of service that's why created command from MCS to tranfer to Post VD STK will not proceed. Please make it in-service and after materials will be removed from the VD chamber by AGV after set it back to OOS and repair. Thank you very much! June 6, 2025 at 1:33 AM, 이도형 (Lee) : @FA NC AN 공매거진 원활히 공급 안되고 있습니다 확인부탁드립니다. June 6, 2025 at 1:39 AM, Mohammad Amir : This message was deleted. June 6, 2025 at 1:40 AM, Mohammad Amir : @FA @Gégény Dávid Please check C1STKA72 _C01 there is Load Oversize error. Thank you! June 6, 2025 at 1:43 AM, 이도형 (Lee) : @FA VD An #7 AGV is stopped. Please check. June 6, 2025 at 1:44 AM, Gégény Dávid : I am going. June 6, 2025 at 1:45 AM, Mohammad Amir : @Khaliun/Ivancsa FA Please check NC AN AGV #9 and #4 is blocking other AGVs including AGV#7 which has job to deliver empty magazine 5-1 and also because of AGVs blocking,most AGVs are not moving and eventually there is no AGVs is free to perform empty magazine transfer. Thank you very much! June 6, 2025 at 1:45 AM, Pavel : @FA GF Staking Buffer stage #10 gives an error, please check Thank you June 6, 2025 at 1:52 AM, Mohammad Amir : @FA @Farkas Tamàs Please check this issue exists since 1:35. Thank you very much! June 6, 2025 at 1:52 AM, Mohammad Amir : Several jobs are pending. June 6, 2025 at 1:59 AM, 이도형 (Lee) : @FA NC AN Robot 오븐플레이트 없어서 풀매거진 투입 안됨 확인부탁드립니다. June 6, 2025 at 2:07 AM, F.Péter A SL L10 : Line 5 ST Agv#7 stop .. please check .. thank you June 6, 2025 at 2:10 AM, 이도형 (Lee) : @FA VD An #10 AGV is stopped. Please check. June 6, 2025 at 2:21 AM, Mohammad Amir : @Baek Hojong(백호종)FA Dear Sir, Please check this issue ,it exists since 1:35 AM. Because of this there are a lots of job pending and C1CNV072 has a also filled with materials and eventually Stacking materials delivery has stopped. Thank you very much! June 6, 2025 at 2:32 AM, QuangPhan : Hello! @Mohammad Amir Please check VD AN 2-2 #11. Only half chamber. June 6, 2025 at 2:32 AM, Mohammad Amir : Checking June 6, 2025 at 2:34 AM, Mohammad Amir : Could you please confirm is there any actual carrier exists at VD AN 2-2 P04 and P03? Thank you very much! June 6, 2025 at 2:35 AM, Mohammad Amir : @FA @Gégény Dávid Please check E0STKC51_C01 there is MCP AP error. Thank you very much! June 6, 2025 at 2:37 AM, Gégény Dávid : I am going. June 6, 2025 at 2:39 AM, QuangPhan : Pls RL for more plate to this chamber pls. June 6, 2025 at 2:39 AM, Mohammad Amir : Sure, please confirm is there any plate actually exists physically in P04/03? Is it empty? Thank you very much! June 6, 2025 at 2:41 AM, QuangPhan : Checking June 6, 2025 at 2:42 AM, QuangPhan : confirmed, right half of chamber is empty. June 6, 2025 at 2:44 AM, Mohammad Amir : Issue has been resolved ✅. As soon as materials will be available it will be tranferred to remaining half chamber of VD AN 2-2. Thank you very much! June 6, 2025 at 2:49 AM, QuangPhan : Thank you so much! June 6, 2025 at 2:49 AM, Mohammad Amir : You are welcome! June 6, 2025 at 3:00 AM, 이도형 (Lee) : @FA NC An 풀매거진 UR AGV 확인 부탁드립니다. June 6, 2025 at 3:03 AM, QuangPhan : Hello! @Mohammad Amir Could you please check NC AN AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! June 6, 2025 at 3:04 AM, Mohammad Amir : Checking June 6, 2025 at 3:11 AM, P.Bence A SSL : @Mohammad Amir please check anode mgz delivery very slow L6 dont have anode full mgz June 6, 2025 at 3:14 AM, Mohammad Amir : From MCS RTD side everything is good ✅. There are a lot of UR jobs at the moments and all AGVs are busy performing these. @ACS @FA @Khaliun/Ivancsa FA Please check AGV#5 there is LD/UD Req not received error that's why UR job of 3-2 is getting delayed. This AGV is also blocking other AGVs. Please pay extra attention to NC AN area there are several jobs and AGVs traffic is making huge delay in job completion. Thank you very much! June 6, 2025 at 3:15 AM, Mohammad Amir : There is currently zero Anode stacking materials available for delivery that's why delivery is slow as soon as materials are getting available,it is being transferred. I am monitoring. Thank you very much! June 6, 2025 at 3:19 AM, 조범희 : @Mohammad Amir Post STK > Stacking How many items can be returned? June 6, 2025 at 3:20 AM, Mohammad Amir : Stacking materials:- Anode :-00 Cathode:-79 Thank you very much! June 6, 2025 at 3:30 AM, QuangPhan : Hello! @FA NC AN Robot #3 error. Thanks June 6, 2025 at 3:32 AM, Mohammad Amir : @FA @Gégény Dávid Please check C1STKA72_C02 there is ready off during Forking error. Thank you! June 6, 2025 at 3:34 AM, Gégény Dávid : I am going. June 6, 2025 at 3:35 AM, Khaliun/Ivancsa FA : Solved June 6, 2025 at 3:35 AM, Mohammad Amir : Thank you very much 🙏 June 6, 2025 at 3:47 AM, Mohammad Amir : This message was deleted. June 6, 2025 at 3:48 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 129 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 104 GF NC reel Available :- • AN: 253 • CA: 199 Thank you very much! June 6, 2025 at 3:59 AM, 이도형 (Lee) : @FA PM님 NC An 매거진 UR / LR 안되고 있습니다 확인 및 조치 부탁드립니다. June 6, 2025 at 4:43 AM, T. Gàbornè C SL NC : Please move the plate the Storage, and afterf Technician check VD. Thank you for much. June 6, 2025 at 4:45 AM, Mohammad Amir : Currently Cathode VD 1-2 is Out of service that's why created command from MCS to tranfer to Post VD STK will not proceed. Please make it in-service afterwards created command from MCS will execute. @QuangPhan could you please help @T. Gàbornè C SL NC in making VD CA 1-2 in-service so that i can send the carriers to Post VD STK. Thank you very much! June 6, 2025 at 4:45 AM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check GF AN NC robot. Robot is not moving. June 6, 2025 at 5:07 AM, Kateryna SSL C : Hello, dear @Mohammad Amir Could you please update available lot for ST GF? June 6, 2025 at 5:07 AM, Mohammad Amir : Hello Sure. June 6, 2025 at 5:08 AM, Mohammad Amir : Stacking materials:- Anode :-00 Cathode:-124 Thank you very much! June 6, 2025 at 5:09 AM, Kateryna SSL C : Thank you! June 6, 2025 at 5:09 AM, Mohammad Amir : You are welcome! June 6, 2025 at 5:40 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.06 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 6, 2025 at 5:53 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 153 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 124 GF NC reel Available :- • AN: 274 • CA: 178 Thank you very much! June 6, 2025 at 6:04 AM, Farkas Tamàs : I was also on the scene. June 6, 2025 at 6:08 AM, KIM SEYEON [김세연]_FA : okay June 6, 2025 at 6:24 AM, duzzaman Md (MCS) : @FA Good morning! Please check E0STKC51_B08 there is. data off sensor on overtime error. Thank you! June 6, 2025 at 6:27 AM, Csanálosi Gábor FA : Omw June 6, 2025 at 6:30 AM, Csanálosi Gábor FA : This message was deleted. June 6, 2025 at 6:43 AM, Csanálosi Gábor FA : Now its done. Had to move in to adjust sensor. June 6, 2025 at 6:45 AM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 2/4 chamber is empty, so please delete the AGV#10 job. June 6, 2025 at 6:47 AM, duzzaman Md (MCS) : Done June 6, 2025 at 6:48 AM, duzzaman Md (MCS) : Plese confirm , VD AN 2/4, P01 is physically empty or not ? June 6, 2025 at 6:48 AM, Zulaa/졸라/Ivancsa FA : Empty June 6, 2025 at 6:51 AM, 안진모 An Jin Mo : Good morning Could you share the info. of lot quantity available? June 6, 2025 at 6:54 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 140 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 128 GF NC reel Available :- • AN: 268 • CA: 156 Thank you ! June 6, 2025 at 6:59 AM, duzzaman Md (MCS) : @FA Please check E0STKA52_C01 there is Load Oversize error. Thank you! June 6, 2025 at 7:04 AM, Csanálosi Gábor FA : On it June 6, 2025 at 7:16 AM, Csanálosi Gábor FA : Done, köszönöm @Pintye Miklós FA. ! June 6, 2025 at 7:16 AM, Pintye Miklós FA. : Szívesen màskoris!😉👍 June 6, 2025 at 7:36 AM, duzzaman Md (MCS) : @FA Please check C1STK71_P17, 018 Light curtain error Thank you June 6, 2025 at 7:38 AM, Kovács Ágnes : Solved June 6, 2025 at 7:58 AM, 김지수PM(Gyuri)_FA : @fa please check e0stkc51 > mc error thanks! June 6, 2025 at 7:58 AM, Kovács Ágnes : Going June 6, 2025 at 8:07 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 126 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 145 GF NC reel Available :- • AN: 272 • CA: 142 Thank you ! June 6, 2025 at 8:14 AM, Kovács Ágnes : Solved June 6, 2025 at 8:18 AM, 김지수PM(Gyuri)_FA : MCP error again 🥲 June 6, 2025 at 8:19 AM, Kovács Ágnes : Going June 6, 2025 at 8:24 AM, Kovács Ágnes : Solved June 6, 2025 at 8:29 AM, duzzaman Md (MCS) : Please check E0CNVA52_RTV01, TR01 Position alarm Thank you! June 6, 2025 at 8:30 AM, Kovács Ágnes : Solved June 6, 2025 at 9:07 AM, 김지수PM(Gyuri)_FA : @fa please check CA NC AGVs June 6, 2025 at 9:07 AM, Csanálosi Gábor FA : Checking June 6, 2025 at 9:08 AM, 김지수PM(Gyuri)_FA : AGVs are blocking each other 🥲 June 6, 2025 at 9:09 AM, Csanálosi Gábor FA : Yup, now starting all June 6, 2025 at 9:39 AM, 최정한.KOVA : VD CA 1-2 챔버내 매거진 AGV반송해주세요. 건조중 알람정지. 설비점검 필요합니다. 점검후 오프라인가동하겠습니다. June 6, 2025 at 9:42 AM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Can I return this to the STK 72 warehouse? June 6, 2025 at 9:46 AM, 김지수PM(Gyuri)_FA : Yes June 6, 2025 at 9:48 AM, duzzaman Md (MCS) : please check e0stkc51 cranes. They are oos. Thank you June 6, 2025 at 9:49 AM, 김지수PM(Gyuri)_FA : Someone is checking now June 6, 2025 at 10:04 AM, Sazzad Bhai SKon : @FA Please check the following duplicated plates UNKDUP-MLA1225 (C1STKA72, 0100101) UNKDUP-MLC4234 (C1STKC72, 0100502) please rack out from manual port and restock June 6, 2025 at 10:08 AM, Sazzad Bhai SKon : @FA It is suspected that all of the magazines of plate MLC2161 is duplicated. Location: C1STKC72 (0200606) Please confirm magazines: MC3292, 2286, 2516, 6324, 5303, 4483 June 6, 2025 at 10:20 AM, Dariimaa/다리마/Ivancsa : Solved June 6, 2025 at 10:21 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please shared available lot June 6, 2025 at 10:22 AM, Sazzad Bhai SKon : Yes now the correct magazines showing. Thank you June 6, 2025 at 10:22 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 124 • Cathode: 01 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 01 • Cathode: 174 GF NC reel Available :- • AN: 266 • CA: 77 Thank you ! June 6, 2025 at 10:34 AM, Dariimaa/다리마/Ivancsa : This message was deleted. June 6, 2025 at 10:36 AM, Dariimaa/다리마/Ivancsa : @Sazzad Bhai SKon C1STKC72_M01 MLC4234 MCS buzzer alarm occurred. Please check. Thank you! June 6, 2025 at 10:36 AM, Sazzad Bhai SKon : It become uNKdup. Barcode failed, Please try again. June 6, 2025 at 10:41 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV01 is OOS Thank you! June 6, 2025 at 10:43 AM, Sazzad Bhai SKon : @FA MLC3082 has 4 duplicated magazines. C1STKC72, 0205707 June 6, 2025 at 10:45 AM, Dariimaa/다리마/Ivancsa : Solved June 6, 2025 at 10:45 AM, Kovács Ágnes : Solved June 6, 2025 at 10:55 AM, Dariimaa/다리마/Ivancsa : Solved June 6, 2025 at 10:57 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 130 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 164 GF NC reel Available :- • AN: 259 • CA: 160 Thank you ! June 6, 2025 at 10:58 AM, Sazzad Bhai SKon : Thank you. MLC4234 is again duplicated. Maybe there are two barcodes. Please confirm: C1STKC72 (0205707) C1STKC72 (0100306) June 6, 2025 at 11:01 AM, Dariimaa/다리마/Ivancsa : Solved June 6, 2025 at 11:02 AM, 김지수PM(Gyuri)_FA : @fa please check robot in NC Sometimes has to put oven plates on the CNV for full magazine. Thanks June 6, 2025 at 11:04 AM, Sazzad Bhai SKon : Yes, now the actual magazines are showing June 6, 2025 at 11:21 AM, Dariimaa/다리마/Ivancsa : Yes. MLC4234 is duplicated June 6, 2025 at 11:24 AM, Sazzad Bhai SKon : Please keep them beside manual port M02. Thank you @김수민 Could you please paste a new barcode? June 6, 2025 at 11:39 AM, Sazzad Bhai SKon : @FA Please do not create manual jobs for Slitting CNV P07 port June 6, 2025 at 11:58 AM, duzzaman Md (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 6, 2025 at 12:00 PM, Kovács Ágnes : Going June 6, 2025 at 12:02 PM, Kovács Ágnes : Solved June 6, 2025 at 12:19 PM, 김희용 : @FA Please Check GF AN NC AGV#09 AGV#09 Error for 20min And C6NCA030_P01, P02 is Error For 20min June 6, 2025 at 12:25 PM, Csanálosi Gábor FA : Already done June 6, 2025 at 12:28 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) can you pls refresh nc ca agv (Acs) part in MCS? Still in red but no errors atm. June 6, 2025 at 12:28 PM, Csanálosi Gábor FA : And now there is a port error. :D June 6, 2025 at 12:32 PM, duzzaman Md (MCS) : Please let me know, when it is sorted. I'll try from mcs June 6, 2025 at 12:32 PM, Csanálosi Gábor FA : I will, thx June 6, 2025 at 12:40 PM, Csanálosi Gábor FA : Now its error free, and also in green, thx. June 6, 2025 at 12:41 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 156 • Cathode: 13 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 144 GF NC reel Available :- • AN: 237 • CA: 150 Thank you ! June 6, 2025 at 12:41 PM, duzzaman Md (MCS) : Thank you for the information 🙏 June 6, 2025 at 12:49 PM, duzzaman Md (MCS) : @Fa Please check Run time over error E0CNVC51_08_085/049 Thank you June 6, 2025 at 12:58 PM, Csanálosi Gábor FA : Done June 6, 2025 at 2:41 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 162 • Cathode: 08 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 148 GF NC reel Available :- • AN: 231 • CA: 124 Thank you ! June 6, 2025 at 3:45 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) can you pls send LTC1419 to a manual port? We need to took out the empty plate (NG), so first @manufacturing will take the reel off. June 6, 2025 at 3:47 PM, Sazzad Bhai SKon : It's already on the CNV port E0CNVC52_BP06. which manual port should we transfer? June 6, 2025 at 3:47 PM, Csanálosi Gábor FA : Any available June 6, 2025 at 3:48 PM, Sazzad Bhai SKon : All the CNV manual ports are occupied. But I will send it to STK Manual port M10 June 6, 2025 at 3:49 PM, Csanálosi Gábor FA : Perfect, i am literally standing there. :) June 6, 2025 at 3:50 PM, duzzaman Md (MCS) : Job initiated. You'll receive it soon June 6, 2025 at 3:50 PM, Csanálosi Gábor FA : Thank you! June 6, 2025 at 4:00 PM, Csanálosi Gábor FA : This message was deleted. June 6, 2025 at 4:03 PM, 원재 : This message was deleted. June 6, 2025 at 4:06 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) LTC1419 is lined out. Thanks for cooperation. June 6, 2025 at 4:10 PM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_155 there is INV-01 Run Time over error and it is blocking stacking materials delivery. Thank you ! June 6, 2025 at 4:16 PM, Csanálosi Gábor FA : Done June 6, 2025 at 4:46 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 132 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 15 • Cathode: 160 GF NC reel Available :- • AN: 225 • CA: 123 Thank you ! June 6, 2025 at 4:47 PM, Nguyen Huy : @FA Hello, pls request AGV to take out materials from chamber 3-7 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 6, 2025 at 4:49 PM, duzzaman Md (MCS) : There are active jobs. Created manually, 2 mins earlier. June 6, 2025 at 4:51 PM, duzzaman Md (MCS) : @FA PLEASE CHECK C1CNV072. A PART OF IT IS OOS June 6, 2025 at 4:54 PM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) VD AN 1-2 chamber has only 2 materials. Please check Thank you! June 6, 2025 at 4:55 PM, duzzaman Md (MCS) : Not lot available June 6, 2025 at 4:59 PM, 안진모 An Jin Mo : In front of VD GF An #4-3 , AGV #5 was stopped with front RSL detect June 6, 2025 at 5:16 PM, 김지수PM(Gyuri)_FA : @fa please check AN NC June 6, 2025 at 5:19 PM, Yosyp Tovt : AGV 6 stopped on ST line 4 June 6, 2025 at 5:20 PM, 김지수PM(Gyuri)_FA : VC10 IS BLOCKING 7 AGVs June 6, 2025 at 5:31 PM, 김지수PM(Gyuri)_FA : Done June 6, 2025 at 6:11 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 6, 2025 at 6:34 PM, 김희용 : @duzzaman Md (MCS) Please Check Available lot! June 6, 2025 at 6:37 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 112 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 155 GF NC reel Available :- • AN: 211 • CA: 117 June 6, 2025 at 6:38 PM, 이도형 (Lee) : @FA NC Ca #3 Robot is stopped. Please check June 6, 2025 at 6:45 PM, 김종원 : 해결됬습니다 June 6, 2025 at 8:03 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 102 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 132 GF NC reel Available :- • AN: 202 • CA: 108 June 6, 2025 at 8:10 PM, Barta Rudi : @FA Hello, NC CA AGV 7 stop, please check, thank youu June 6, 2025 at 8:19 PM, 이도형 (Lee) : @FA An Reel Please check if the negative reel is not being discharged. June 6, 2025 at 8:44 PM, 이도형 (Lee) : @FA LR 확인부탁드립니다 NCAn 2-2 3-2 P01 P02 June 6, 2025 at 8:48 PM, VK (mcs) : This message was deleted. June 6, 2025 at 8:48 PM, VK (mcs) : Notching anode 2/2 UR received at 20:37 for port 2 3/2 UR received at 20:22 for port 1 June 6, 2025 at 8:56 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.06 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 6, 2025 at 9:15 PM, VK (mcs) : @FA Please check Anode Post-STK A72 -C01 Load over size error. June 6, 2025 at 9:54 PM, VK (mcs) : @FA Please check cathode reel STK C51 & C52 crane 02 Port interface error. June 6, 2025 at 9:58 PM, 동현 : Is anyone checking? June 6, 2025 at 10:01 PM, VK (mcs) : I think technicians are working on it. As I see door open error. June 6, 2025 at 10:02 PM, Mr.Miti (미티) FA : Dobe June 6, 2025 at 10:02 PM, Mr.Miti (미티) FA : *done June 6, 2025 at 10:04 PM, P.Bence A SSL : GF L4-5-6 3 Agv stop please check !!!!! June 6, 2025 at 10:04 PM, P.Bence A SSL : Agv number : 8, 10, 5 June 6, 2025 at 10:05 PM, VK (mcs) : Anode Post STK is out of service now and carrier on CNV are waiting for that. June 6, 2025 at 10:06 PM, P.Bence A SSL : L4 dont have full anode plate … June 6, 2025 at 10:07 PM, VK (mcs) : Because of that AGVs can not unload material June 6, 2025 at 10:08 PM, P.Bence A SSL : @Mr.Miti (미티) FA szia dolgozik valaki a problémám ? June 6, 2025 at 10:08 PM, P.Bence A SSL : Problémán * June 6, 2025 at 10:08 PM, Mr.Miti (미티) FA : Persze June 6, 2025 at 10:09 PM, P.Bence A SSL : Nagyjàból mennyi idő? L4 prio sor így állítok le másikat ha sok idő mert kell az anyag June 6, 2025 at 10:09 PM, Mr.Miti (미티) FA : Nem tudom pontosan. Remélhetőleg pár perc. Most megyek oda June 6, 2025 at 10:16 PM, P.Bence A SSL : Daru probléma van ? June 6, 2025 at 10:28 PM, Barta Rudi : @VK (mcs) Hello..The AGV hasn’t been picking up the full magazines from the Anode 3/2 machine for a while. The machine has stopped because it’s full of completed magazines. Please check it. Thank you. June 6, 2025 at 10:29 PM, Barta Rudi : The Anode 1/3 has the same issue. June 6, 2025 at 10:29 PM, VK (mcs) : Checking June 6, 2025 at 10:31 PM, Mr.Miti (미티) FA : Igen June 6, 2025 at 10:32 PM, Mr.Miti (미티) FA : Most lesz jó June 6, 2025 at 10:34 PM, VK (mcs) : Currently, All AGVs are busy. There is no specific problem. June 6, 2025 at 10:35 PM, Mr.Miti (미티) FA : Működik June 6, 2025 at 10:49 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 Carriers not moving June 6, 2025 at 10:54 PM, VK (mcs) : 16136 June 6, 2025 at 10:58 PM, Barta Rudi : @FA NC An AGV 2 stop, please check, thank you June 6, 2025 at 11:01 PM, 정은탁 (Jung EunTak) : @FA NC An 4-2 AGV #2 UR Error. Please Check. June 6, 2025 at 11:23 PM, 김희래 : @mcs Can you adjust priority MA2715(C0PVA010_P12) in acs? Its status still queued for 1 hour. June 6, 2025 at 11:25 PM, VK (mcs) : Modifying in ACS is not in my hand but I changed priority in MCS. June 6, 2025 at 11:38 PM, Khaliun/Ivancsa FA : Hello @MCS VD CA AGV#7 please check the work. June 6, 2025 at 11:38 PM, Khaliun/Ivancsa FA : @MCS 6/9 chamber closed June 6, 2025 at 11:39 PM, Barta Rudi : @FA NC CA AGV 5 stop, please check, thank you June 6, 2025 at 11:41 PM, Zaya/ivancsa FA : @mcs plc delete job Agv5 Nc Ca June 6, 2025 at 11:41 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 54 • Cathode: 01 Pre STK > VD • Anode: 21 • Cathode: 03 Post STK > Stacking • Anode: 02 • Cathode: 150 GF NC reel Available :- • AN: 187 • CA: 120 June 6, 2025 at 11:42 PM, VK (mcs) : Canceled June 6, 2025 at 11:42 PM, VK (mcs) : Destination is 6/9 Please ask manufacturing team June 6, 2025 at 11:51 PM, P.Bence A SSL : Line 6 agv4 stop check please thank you ! June 6, 2025 at 11:52 PM, Khaliun/Ivancsa FA : @MCS That chamber is closed. Please cancel the AGV#7 job. Thank you. June 6, 2025 at 11:55 PM, VK (mcs) : Do you have any information of ports 1 and 2? Materials have been transferred manually? June 6, 2025 at 11:57 PM, VK (mcs) : Job canceled June 6, 2025 at 11:58 PM, Khaliun/Ivancsa FA : Sorry, I don't know for sure, I didn't transfer it manually. June 7, 2025 at 12:02 AM June 7, 2025 at 12:02 AM, VK (mcs) : Please transfer AGV 7 to post-STK. Thx June 7, 2025 at 12:39 AM, Nguyên : AN GF NC Machne 2/2.2/1.5/2.5/1.6/3.6/1 AGV does not pick up goods Come check for me June 7, 2025 at 12:46 AM, VK (mcs) : AGVs are busy, I changed priority for some of them. For 5/2 RTD received UR at 00:43 June 7, 2025 at 12:58 AM, P.Bence A SSL : @VK (mcs) L4-5-6 stacking anode material delivery very slow please can u check June 7, 2025 at 1:03 AM, VK (mcs) : Everything is fine. Just there is no available material. June 7, 2025 at 1:04 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 64 • Cathode: 00 Pre STK > VD • Anode: 14 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 158 GF NC reel Available :- • AN: 185 • CA: 140 June 7, 2025 at 1:26 AM, P.Bence A SSL : L5 stacking Agv 5 stop check please . June 7, 2025 at 1:33 AM, Khaliun/Ivancsa FA : @MCS VD AN AGV#10 Please delete the work. There is no material there. June 7, 2025 at 1:34 AM, Khaliun/Ivancsa FA : Please also return AGV#7 to STK. June 7, 2025 at 1:37 AM, VK (mcs) : Job Canceled June 7, 2025 at 1:38 AM, Khaliun/Ivancsa FA : Thank you June 7, 2025 at 1:39 AM, VK (mcs) : Transport command created. June 7, 2025 at 1:52 AM, Anita Mirosnicsenko : Hello! L3 stacking AGV# 8 stop, check please June 7, 2025 at 1:54 AM, Zaya/ivancsa FA : no problem, AGV 3 normally working here! June 7, 2025 at 2:12 AM, P.Bence A SSL : @VK (mcs) Please delete L3 anode LR We dont have anode We need anode mgz other line .. June 7, 2025 at 2:13 AM, VK (mcs) : Is it stacking area? June 7, 2025 at 2:14 AM, P.Bence A SSL : Yes June 7, 2025 at 2:19 AM, VK (mcs) : Stacking line 3 LR cleared. June 7, 2025 at 2:26 AM, Nguyên : AN GF NC Releasing very slowly Come check for me Thank you June 7, 2025 at 2:48 AM, VK (mcs) : @Manufacturing 4 carriers are waiting for transfer to the Anode VD 6/4 but it is out of service. Please confirm. June 7, 2025 at 3:19 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 49 • Cathode: 09 Pre STK > VD • Anode: 13 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 145 GF NC reel Available :- • AN: 164 • CA: 109 June 7, 2025 at 3:43 AM, Barta Rudi : VD CA AGV 2 stop please check, thank you June 7, 2025 at 4:06 AM, VK (mcs) : @FA Please check Anode reel conveyor A52 June 7, 2025 at 4:48 AM, VK (mcs) : @FA Please check this issue still not solved. Thx June 7, 2025 at 5:02 AM, 정은탁 (Jung EunTak) : @FA NC Ca Robot #3 Error. Please Check. June 7, 2025 at 5:12 AM, Khaliun/Ivancsa FA : Solved. June 7, 2025 at 5:43 AM, 김지수PM(Gyuri)_FA : @fa please check c1cnvc72 June 7, 2025 at 5:45 AM, Mohammad Amir : @FA Please check E0CNVC52_BP12 there is Data Mismatch Error and RTV: Run time over error. Reels delivery has been stopped. Thank you June 7, 2025 at 5:53 AM, Debreczeni Ármin : @VK (mcs) Hello, please share lot quantity June 7, 2025 at 5:53 AM, Mohammad Amir : Good morning, Checking! June 7, 2025 at 5:57 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 06 Pre STK > VD • Anode: 35 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 132 GF NC reel Available :- • AN: 141 • CA: 110 Thank you very much! June 7, 2025 at 6:01 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.07. 9+2/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Boromisza Zoltán, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Kovács Ágnes, Csanálosi Gábor --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(1): 김지수 June 7, 2025 at 6:02 AM, Mohammad Amir : @FA @Kovács Ágnes Good morning, Please check this issue it still exists. Reels Cathode delivery has stopped. Thank you very much! June 7, 2025 at 6:02 AM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please checke0cnvc52 bp12 June 7, 2025 at 6:03 AM, Hữu Thắng : @FA NC AN Line 4 AGV#5 stopped . can u llease check it . thanks June 7, 2025 at 6:04 AM, Hữu Thắng : @MCS Can u please check UR NC AN 5/2 . thank you June 7, 2025 at 6:04 AM, Mohammad Amir : Good morning, Sure. June 7, 2025 at 6:05 AM, Kovács Ágnes : Going June 7, 2025 at 6:07 AM, Mohammad Amir : UR received successfully ✅. Checking reason for dealay. Thank you! June 7, 2025 at 6:11 AM, 인제(Hwang) : @FA VD An 5-4, 5-7 need repair. Please move the plates inside the chamber to the warehouse June 7, 2025 at 6:11 AM, Mohammad Amir : Checking. June 7, 2025 at 6:12 AM, Kovács Ágnes : Solved June 7, 2025 at 6:12 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 6:14 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 6:15 AM, 김정희(Jeong hee FA) : dayshift FA "A" Schedule Date: 2025.06.07 Time:06:00~18:00 전극 - GF 최명운,김정희 (CHOI Myoungwoon) (Kim jeong hul) June 7, 2025 at 6:15 AM, Mohammad Amir : UR received successfully for both Ports P01/P02 successfully. ✅ you witnessed delay because all AGvs were busy. Now AGV#8 has been assigned and on the way to pick full magazine. I am monitoring. Thank you very much! June 7, 2025 at 6:20 AM, Mohammad Amir : Jobs have created to transfer materials form VD AN 5-4 to STK successfully ✅. Working on 5-7. Thank you very much! June 7, 2025 at 6:23 AM, Mohammad Amir : Jobs have been created for 5-7 VD AN as well ✅. Thank you very much! June 7, 2025 at 6:25 AM, 인제(Hwang) : Thank you! June 7, 2025 at 6:25 AM, Mohammad Amir : You are welcome! June 7, 2025 at 6:57 AM, Hữu Thắng : @MCS Could u plz check UR NC AN 3/2 plz . Thank you June 7, 2025 at 6:58 AM, Mohammad Amir : Sure,Checking. June 7, 2025 at 7:00 AM, Mohammad Amir : This message was deleted. June 7, 2025 at 7:00 AM, Mohammad Amir : UR received successfully and job has been created as well ✅. Waiting for AGV to be assigned. Thank you very much! June 7, 2025 at 7:26 AM, Hữu Thắng : The machine still waiting AGV for unloading full magazines . could u please re-check . thank you June 7, 2025 at 7:26 AM, Mohammad Amir : Checking June 7, 2025 at 7:27 AM, Mohammad Amir : @FA @Pintye Miklós FA. Please check E0STKA52_C01 there is Load Oversize error. Thank you! June 7, 2025 at 7:27 AM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 4-5 empty. Please job cancel. June 7, 2025 at 7:29 AM, Mohammad Amir : Unfortunately still all AGVs are busy. Waiting for the AGVs. Thank you very much! June 7, 2025 at 7:30 AM, Mohammad Amir : Currently there is no active jobs ✅. Thank you very much! June 7, 2025 at 7:32 AM, Csanálosi Gábor FA : On it June 7, 2025 at 7:32 AM, Mohammad Amir : Köszönöm szepen 🙏! June 7, 2025 at 7:32 AM, 김현태 : VD CA AGV #2 error. Thanks June 7, 2025 at 7:34 AM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 5-7 empty. Please job cancel. June 7, 2025 at 7:34 AM, Mohammad Amir : @MES Please check UNKDUP-MLC4234-250607071351A located at C1STKC72_M02 ,it is in error because for this carrier ,carrier id doesn't exist in MES. Thank you very much! June 7, 2025 at 7:34 AM, Mohammad Amir : Sure ,Checking. June 7, 2025 at 7:35 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 7, 2025 at 7:36 AM, Csanálosi Gábor FA : Done June 7, 2025 at 7:37 AM, Mohammad Amir : Köszönöm szepen 🙏 June 7, 2025 at 7:38 AM, 전 운 (Jeon Woon) : Please recheck GF lot quantity @Mohammad Amir June 7, 2025 at 7:38 AM, Mohammad Amir : Sure checking June 7, 2025 at 7:42 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 26 Pre STK > VD • Anode: 61 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 128 GF NC reel Available :- • AN: 150 • CA: 97 Thank you very much! June 7, 2025 at 7:43 AM, Mohammad Amir : @전 운 (Jeon Woon) Sir, For your information. Thank you very much! June 7, 2025 at 7:43 AM, 전 운 (Jeon Woon) : Thank you! June 7, 2025 at 7:43 AM, Mohammad Amir : You are welcome! June 7, 2025 at 7:44 AM, Hữu Thắng : GF NC AN Line 3/2 The machine stopped due to AGV didn’t unloading full magazines 06:57 ~ June 7, 2025 at 7:44 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52_BP10 there is Data Mismatch Error and RTV: Data Loss error. Reels delivery has been stopped. Thank you June 7, 2025 at 7:47 AM, Csanálosi Gábor FA : Omw, wss the same on an side June 7, 2025 at 7:48 AM, Mohammad Amir : Everything is good from MCS /RTD side ✅. There is job to unload however currently all AGVs are busy that's why AGV is not being assigned. I have provided this unloading job with extra priority. Thank you very much! June 7, 2025 at 7:49 AM, Mohammad Amir : @Khaliun/Ivancsa FA Please check AN NC AGV#7 ,it is blocking AGV#1 and #3 hence there is delay in AGV trannsfer. Thank you very much! June 7, 2025 at 7:51 AM, Lan Nhi : @FA hi. please check for me. inline line 1 Nc/Ca dumps empty magazines when agv #5 is inserted June 7, 2025 at 7:55 AM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 5-4 empty. Please job cancel. June 7, 2025 at 7:55 AM, Mohammad Amir : Checking June 7, 2025 at 7:56 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 7, 2025 at 7:57 AM, Csanálosi Gábor FA : Done June 7, 2025 at 7:57 AM, Hữu Thắng : @FA E0CNVA52 NC AN has an error : STP-01-Up Cylinder Error . Could u plz check it. Thank you June 7, 2025 at 7:57 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 7:57 AM, Csanálosi Gábor FA : Omw June 7, 2025 at 7:58 AM, Hữu Thắng : @MCS GF NC AN Line 6/1 . Could you plz check UR also . Thank u June 7, 2025 at 7:59 AM, Mohammad Amir : Sure, Checking June 7, 2025 at 7:59 AM, Mohammad Amir : UR received successfully ✅. AGV#8 has been assigned. Thank you very much! June 7, 2025 at 8:02 AM, Mohammad Amir : AGV#1 has finally assigned for 3-2 NC AN ✅. Thank you very much! June 7, 2025 at 8:05 AM, 김정희(Jeong hee FA) : GF_CA NC AGV#2 1-3 빈매거진 LR중전도 발생했습니다 June 7, 2025 at 8:06 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir could you please update the location of MLA2236. I checked it was stocked as UNK25060606011950653VR in C1STKA72 0100201 June 7, 2025 at 8:07 AM, Mohammad Amir : Sure Sir, Working on it. June 7, 2025 at 8:08 AM, 김지수PM(Gyuri)_FA : Currenly in MCS(transport jobs) elapsed time of mla2236 is over 29hours🥲 June 7, 2025 at 8:12 AM, 김정희(Jeong hee FA) : 정정합니다 AGV#05 매거진 정위치잡고 가동했습니다(김지수PM전달) June 7, 2025 at 8:13 AM, 김지수PM(Gyuri)_FA : Checked! Thanks June 7, 2025 at 8:15 AM, Mohammad Amir : Sir, It was a junk job ,the task for this job has already been completed,it just exists on the system,it has been cancelled as well because we have automatic cancellation for NA carrier after certain period of time system clears such junk job. Thank you very much! June 7, 2025 at 8:15 AM, Mohammad Amir : You are welcome! June 7, 2025 at 8:26 AM, Csanálosi Gábor FA : @Zulaa/졸라/Ivancsa FA please check an vd agv 9 June 7, 2025 at 8:26 AM, Csanálosi Gábor FA : @Mohammad Amir pls check an vd agv 8, in mcs i see it has no job, but there is a plate in it? June 7, 2025 at 8:27 AM, Mohammad Amir : Checking June 7, 2025 at 8:29 AM, Csanálosi Gábor FA : Agv 7 also June 7, 2025 at 8:29 AM, Mohammad Amir : I have given it task to store the carrier in the STK. @Zulaa/졸라/Ivancsa FA , please check AGV#8 AN VD ,it is in idle state and now it has task. Thank you very much! June 7, 2025 at 8:29 AM, Mohammad Amir : Checking June 7, 2025 at 8:33 AM, Csanálosi Gábor FA : Agv 9 also. It is some infection? :D June 7, 2025 at 8:37 AM, Mohammad Amir : I have resolved all the issues ✅. Now all Mentioned AGVs are moving. Thank you very much! June 7, 2025 at 8:37 AM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA Please check this issue. Thank you! June 7, 2025 at 8:37 AM, Csanálosi Gábor FA : Thank you! June 7, 2025 at 8:37 AM, Mohammad Amir : You are welcome! June 7, 2025 at 8:38 AM, Hữu Thắng : @FA VD AN The chamber 5/7 only 1 plate ( MLA3043 ) . . Could u plz transfer magazine to KA72 . Thank you June 7, 2025 at 8:38 AM, Mohammad Amir : Sure Checking! June 7, 2025 at 8:38 AM, Hữu Thắng : @MCS NC AN RTV provide material for us so slowly . Could u plz check is there any problem . thank you . June 7, 2025 at 8:39 AM, Mohammad Amir : Checking June 7, 2025 at 8:40 AM, Mohammad Amir : Jobs have been created successfully ✅. Thank you very much! June 7, 2025 at 8:41 AM, Mohammad Amir : Issue has been resolved ✅. Now Anode reels on the way. Thank you very much! June 7, 2025 at 8:42 AM, Hữu Thắng : Thank you very much June 7, 2025 at 8:42 AM, Mohammad Amir : You are welcome! June 7, 2025 at 8:54 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 7, 2025 at 8:55 AM, Mohammad Amir : Sure Sir. Checking June 7, 2025 at 8:56 AM, Hữu Thắng : NC AN 5/3 08:43 ~ stopped due to waiting agv unloading full magazines June 7, 2025 at 8:56 AM, Mohammad Amir : Dear Sir @KIM SEYEON [김세연]_FA , GF Next lot quantity available Pre STK > Notching • Anode: 24 • Cathode: 21 Pre STK > VD • Anode: 63 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 138 GF NC reel Available :- • AN: 147 • CA: 90 Thank you very much! June 7, 2025 at 8:57 AM, Mohammad Amir : Checking June 7, 2025 at 9:00 AM, Mohammad Amir : UR received successfully ✅ Job has also been created successfully. I have provided more priority. Machine is waiting for the AGV and currently all 10 , NC AN AGVs are busy. Thank you very much! June 7, 2025 at 9:06 AM, Hữu Thắng : NC AN 5/2 : 08:33 ~ June 7, 2025 at 9:08 AM, Mohammad Amir : Checking June 7, 2025 at 9:09 AM, Mohammad Amir : For 5-2 NC AN_P02 ,UR received successfully and job created ✅. Currently waiting for the AGV. For P01, Please press UR again. Thank you very much! June 7, 2025 at 9:09 AM, 김지수PM(Gyuri)_FA : @fa please check light curtain (C71 CA 17 18 port) June 7, 2025 at 9:21 AM, 김희래 : @FA Please check AN VD AGV. 2 AGVs are stopped with error. June 7, 2025 at 9:27 AM, 김희래 : @Mohammad Amir Cna you check why MLA0173 is not available for stacking? It is in post STK. June 7, 2025 at 9:28 AM, Mohammad Amir : Sure Sir , Checking June 7, 2025 at 9:36 AM, Mohammad Amir : It is currently stored in C1STKA72,I am checking reason why it is not available for stacking. Thank you very much! June 7, 2025 at 9:37 AM, 김희래 : @삼구 담당자분들께, 음극 VD 후창고에 Full plate 중 스태킹 반송 가능자재로 잡히지 않는게 10개 있습니다. 혹시 ID 알려드리면 MES에서도 사용 가능한 상태인지 확인해주실 수 있는 분 계실까요? June 7, 2025 at 9:38 AM, Hữu Thắng : NC AN 5/2 : 08:33 ~ 09:18 NC AN 6/2 : 08:57~ June 7, 2025 at 9:39 AM, 김대웅 Kim Daewung : 아이디 공유 부탁드립니다 June 7, 2025 at 9:40 AM, 김희래 : MLA3074 1225 0173 1240 0037 4207 3004 0236 감사합니다! June 7, 2025 at 9:41 AM, 김희래 : 2개는 스태킹쪽으로 나갔고 8개입니다 June 7, 2025 at 9:42 AM, 김대웅 Kim Daewung : @김지수PM(Gyuri)_FA 음극 VD 3-6, 4-3 옆 AGV 턴하는 구간에 AGV 5, 9, 10 턴하다가 알람 자주 뜬다고합니다 June 7, 2025 at 9:44 AM, KIM SEYEON [김세연]_FA : @김대웅 Kim Daewung 피엠님 확인하고 알람 개선하겠습니다. June 7, 2025 at 9:45 AM, Mohammad Amir : Sir, MlA3074 and MLA1225 is being filtered because of Hold. Checking for rest. Thank you! June 7, 2025 at 9:51 AM, Mohammad Amir : Sir, For MLA0173,it is not being supplied to RTD from MES side that's why it is not even visible in Next lot even before filtration. That's why it is not available. June 7, 2025 at 9:56 AM, Debreczeni Ármin : @Szücs Géza FT-B Szia. A plate szállítás a stackingen automatikus folyamattá vált jók az infoim? June 7, 2025 at 10:03 AM, Szücs Géza FT-B : szia, igen. én is úgy tudom. June 7, 2025 at 10:06 AM, 김대웅 Kim Daewung : @KIM SEYEON [김세연]_FA @김지수PM(Gyuri)_FA An 건조분 부족으로인한 ST~PKG 비가동 1L 09:35~ 2L 09:39~ GF 전라인 비가동 예상됩니다. June 7, 2025 at 10:12 AM, Szücs Géza FT-B : aki máshogy tudja, most szólaljon fel, vagy hallgassék mindörökre 😄🤣 June 7, 2025 at 10:13 AM, 김대웅 Kim Daewung : @Hữu Thắng MLA0173 don't get VD QC check. But it is in the VD-ST storage. Please check it. June 7, 2025 at 10:16 AM, Hữu Thắng : I’m on it June 7, 2025 at 10:19 AM, 김대웅 Kim Daewung : This message was deleted. June 7, 2025 at 10:19 AM, 김대웅 Kim Daewung : VD 아래 알람 다수 발생 중 [126] unloading time out (30min) NC 아래 알람 다수 발생 중 [0303] magazine ready alarm June 7, 2025 at 10:25 AM, Hữu Thắng : i gave the sample to QC , remind QF member to fill the results in MES . When it done i’ll put MLA0173 to KA72 . Thank you June 7, 2025 at 10:28 AM, 김대웅 Kim Daewung : @김지수PM(Gyuri)_FA GF 음극 노칭 전창고 robot movement alarm 확인 부탁드립니다 June 7, 2025 at 10:30 AM, KIM SEYEON [김세연]_FA : @Csanálosi Gábor FA please check robot alarm. June 7, 2025 at 10:30 AM, 김지수PM(Gyuri)_FA : @Csanálosi Gábor FA could you please check it? June 7, 2025 at 10:32 AM, Mohammad Amir : Could you please also check MLA1240,0037,4207,3004,0236? It is also not available from MES side to RTD. Thank you very much! June 7, 2025 at 10:32 AM, Csanálosi Gábor FA : Sure, omw June 7, 2025 at 10:33 AM, Hữu Thắng : Sure . Give me 10’ June 7, 2025 at 10:33 AM, Mohammad Amir : Sure ,Thank you very much! June 7, 2025 at 10:33 AM, Mohammad Amir : @Hữu Thắng June 7, 2025 at 10:35 AM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA Sir, As you requested,I have transferred teh UNKNOWN carrier located on the NC AN AGV#9 to Manual port 01 successfully ✅. Thank you very much! June 7, 2025 at 10:36 AM, 김지수PM(Gyuri)_FA : Thanks! June 7, 2025 at 10:36 AM, Mohammad Amir : You are most welcome! June 7, 2025 at 10:38 AM, 김정희(Jeong hee FA) : GF_A 순환물류 175자리 AIR Hose Link 발생했습니다 June 7, 2025 at 10:39 AM, Debreczeni Ármin : M02 IN port not working Please help June 7, 2025 at 10:40 AM, 김정희(Jeong hee FA) : Stopper cylinder 입니다 June 7, 2025 at 10:42 AM, 김지수PM(Gyuri)_FA : 가고있습니다. June 7, 2025 at 10:43 AM, Csanálosi Gábor FA : Resolved. Not responded to reset button, i deleted the destinaton from robot, that helped. June 7, 2025 at 10:45 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 22 • Cathode: 19 Pre STK > VD • Anode: 65 • Cathode: 02 Post STK > Stacking • Anode: 05 • Cathode: 132 GF NC reel Available :- • AN: 137 • CA: 108 Thank you very much! June 7, 2025 at 10:47 AM, Mohammad Amir : @김희래 Sir, Update :- Issue has been resolved from MES side and now following carriers are available for stacking process:- MLA0037 MLA1240 MLA4207 Thank you very much! June 7, 2025 at 10:48 AM, 김희래 : @김대웅 Kim Daewung 피엠님. 음극 자재 후창고로 들어오면 스태킹 4,5,6라인보다 1,2,3라인으로 우선으로 가게끔 배출 수량 조정하겠습니다. 참고 부탁드립니다. June 7, 2025 at 10:49 AM, 김대웅 Kim Daewung : 아니요 4~6 우선으로 유지 부탁드립니다 June 7, 2025 at 10:50 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52 _RTV01 there is Data Loss Error and it blocking reels delivery. Thank you very much! June 7, 2025 at 10:50 AM, 김희래 : 네 지금 기준은 1,2,3,4,5,6 동일한 기준인데, 그럼 우선 현상 유지하겠습니다. 혹시 라인 우선 순위 필요하시면 말씀 부탁드립니다 June 7, 2025 at 10:51 AM, 김대웅 Kim Daewung : 현재 기준 유지로 괜찮을 것 같습니다. 우선순위 필요하면 말씀드리겠습니다 June 7, 2025 at 10:52 AM, Mohammad Amir : @FA @Zulaa/졸라/Ivancsa FA Please check C1CNV072_16_156/155 there is Data Loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 7, 2025 at 10:55 AM, Zulaa/졸라/Ivancsa FA : We working. Solved. June 7, 2025 at 10:56 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 10:59 AM, Csanálosi Gábor FA : Solved June 7, 2025 at 10:59 AM, Mohammad Amir : Thank you very much! June 7, 2025 at 11:05 AM, 김지수PM(Gyuri)_FA : @fa please check C1CNV072 June 7, 2025 at 11:10 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa @Zulaa/졸라/Ivancsa FA June 7, 2025 at 11:13 AM, 김대웅 Kim Daewung : This message was deleted. June 7, 2025 at 11:19 AM, 김지수PM(Gyuri)_FA : @김정희(Jeong hee FA) GF 순환물류 봐주시면 감사하겠습니다. June 7, 2025 at 11:21 AM, 김지수PM(Gyuri)_FA : @Zulaa/졸라/Ivancsa FA remove the MLA0106 MLA6127 on the conveyor June 7, 2025 at 11:22 AM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52 _RTV01 there is Data Loss Error and it blocking reels delivery. Thank you very much! June 7, 2025 at 11:31 AM, Csanálosi Gábor FA : Done, and going back to the recent error. -.- June 7, 2025 at 11:32 AM, 김지수PM(Gyuri)_FA : @김정희(Jeong hee FA) @최명운(CHOI MYOUNGWOON) GF노칭 각각의 매뉴얼포트로 풀매거진 가고있습니다. 전창고로 넣어주시면 감사하겠습니다. June 7, 2025 at 11:32 AM, 김지수PM(Gyuri)_FA : 음극 June 7, 2025 at 11:32 AM, Mohammad Amir : Thank you very much! 🙏 June 7, 2025 at 11:33 AM, 김지수PM(Gyuri)_FA : @fa c1stka71 mcp error 🥲 June 7, 2025 at 11:39 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 09 Pre STK > VD • Anode: 73 • Cathode: 02 Post STK > Stacking • Anode: 11 • Cathode: 131 GF NC reel Available :- • AN: 134 • CA: 123 Thank you very much! June 7, 2025 at 11:43 AM, Csanálosi Gábor FA : Solved June 7, 2025 at 11:43 AM, 전 운 (Jeon Woon) : Please Checking GF ST AN AGV#8 June 7, 2025 at 11:45 AM, 김지수PM(Gyuri)_FA : @최명운(CHOI MYOUNGWOON) GF양극 로봇2 오븐플레이트 CNV에 걸렸습니다! June 7, 2025 at 11:46 AM, Mohammad Amir : Please check for C0PVC020_08_042 there is Data Mismatch error. Empty magazine delivery is affected. Thank you very much! June 7, 2025 at 11:47 AM, Csanálosi Gábor FA : Coming. (Still cant see yaskawa errors in mcs, any solution yet? ) June 7, 2025 at 11:50 AM, 김지수PM(Gyuri)_FA : Someone is taking action, but seems like need your help June 7, 2025 at 11:50 AM, Mohammad Amir : Thank you very much. June 7, 2025 at 11:55 AM, 최명운(CHOI MYOUNGWOON) : MLC0132 plate was defective June 7, 2025 at 11:55 AM, Csanálosi Gábor FA : @Mohammad Amir the plate MLCP132 is NG, i took out, and placing to the corridor. The holders have gap, thats couse stuck. June 7, 2025 at 11:56 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check C1CNV072 June 7, 2025 at 11:56 AM, Mohammad Amir : Information has been updated in MCS and RTD.✅ Thank you very much! June 7, 2025 at 11:58 AM, 김지수PM(Gyuri)_FA : @최명운(CHOI MYOUNGWOON) 캐리어정보 안맞았던거 같은데 다시리셋 스타트 부탁드려요 June 7, 2025 at 11:58 AM, Zulaa/졸라/Ivancsa FA : The gas is coming out again. Please check. June 7, 2025 at 11:58 AM, 김지수PM(Gyuri)_FA : Okay going June 7, 2025 at 12:02 PM, 김정희(Jeong hee FA) : GF_A 순환물류 175자리 stopper cylinder AIR Hose Link 재발생했습니다 June 7, 2025 at 12:12 PM, Mohammad Amir : @FA Is there someone working on C1CNV072? It is OOS and stacking materials delivery has been stopped. Please confirm. Thank you very much! June 7, 2025 at 12:12 PM, 김지수PM(Gyuri)_FA : Yes June 7, 2025 at 12:13 PM, Mohammad Amir : Thank you very much for the confirmation,sir. June 7, 2025 at 12:14 PM, 김지수PM(Gyuri)_FA : GF순환물류 에어피팅이 터져서 순환물류가 멈췄습니다. 빠르게 대응하겠습니다. June 7, 2025 at 12:22 PM, 김희래 : @Mohammad Amir Please check AN Robot#2 LR. There is no plate and job. June 7, 2025 at 12:22 PM, Mohammad Amir : Sure Sir, Checking. June 7, 2025 at 12:23 PM, Mohammad Amir : Sir, Job has been created successfully for C0PVA020_P07 ✅. Afterwards there is no empty magazine available. Thank you very much! June 7, 2025 at 12:26 PM, Mohammad Amir : On top of that , Sir, There is an active LR from P01 since 12:17 port as well ,as soon as magazine will be available,jobs will be created. I am monitoring. Thank you very much! June 7, 2025 at 12:33 PM, Mohammad Amir : This message was deleted. June 7, 2025 at 12:33 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52 _RTV01 there is Data Loss Error. Thank you very much! June 7, 2025 at 12:34 PM, Csanálosi Gábor FA : @Kovács Ágnes June 7, 2025 at 12:34 PM, Kovács Ágnes : Going June 7, 2025 at 12:40 PM, Kovács Ágnes : Solved June 7, 2025 at 12:41 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 12:41 PM, Kovács Ágnes : Szívesen 🙂 June 7, 2025 at 12:46 PM, 조한진(Jin) : @mcs plase Check Next Available lot. Thank you. June 7, 2025 at 12:47 PM, Mohammad Amir : Sure , Checking! June 7, 2025 at 12:48 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 57 • Cathode: 00 Post STK > Stacking • Anode: 29 • Cathode: 151 GF NC reel Available :- • AN: 136 • CA: 146 Thank you very much! June 7, 2025 at 1:05 PM, 전 운 (Jeon Woon) : @김지수PM(Gyuri)_FA PM님 GF An Stack C/V AGV#8호기 IN P21 Port 지나갈때마다 위치 틀어지면서 Alarm 발생합니다. June 7, 2025 at 1:05 PM, 김지수PM(Gyuri)_FA : 12:54~ GF순환물류 정상 가동 중 입니다. June 7, 2025 at 1:06 PM, 김지수PM(Gyuri)_FA : @FA please check it June 7, 2025 at 1:13 PM, Mohammad Amir : @FA @Zulaa/졸라/Ivancsa FA Please check C1STKA72_P07/08 ther is Light Curtain error. Job for AGV#1 is pending. Thank you very much! June 7, 2025 at 1:18 PM, Zulaa/졸라/Ivancsa FA : Solved June 7, 2025 at 1:18 PM, Mohammad Amir : Thank you very much! 🙏 June 7, 2025 at 1:40 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 35 • Cathode: 01 Post STK > Stacking • Anode: 23 • Cathode: 153 GF NC reel Available :- • AN: 134 • CA: 149 Thank you very much! June 7, 2025 at 1:52 PM, Lan Nhi : @Sazzad Bhai SKon hello. please check for me. M06. Reel line1,2,3,6 GF/Ca not provided reel at 12:30 June 7, 2025 at 1:53 PM, Mohammad Amir : Sure Checking, Thank you very much! June 7, 2025 at 1:53 PM, 권기홍 : @김대웅 Kim Daewung 혹시스택 3라인 스테이션 OOS설정된 사유가 있으신지요? June 7, 2025 at 1:55 PM, Mohammad Amir : This message was deleted. June 7, 2025 at 1:55 PM, Mohammad Amir : Issue has been resolved ✅. Reels are on the way . Feel free to contact me immediately if you face issues related to production. Thank you very much! June 7, 2025 at 1:55 PM, 김대웅 Kim Daewung : 음극 매거진 부족으로, 전라인 다돌리면 금방 재고 소진될 예정이라, 재고 좀 쌓일때까지 3라인은 세우고있습니다 자동회 공급이 느려서요 June 7, 2025 at 1:56 PM, Lan Nhi : Thank you very muck June 7, 2025 at 1:56 PM, Mohammad Amir : You are welcome! June 7, 2025 at 1:56 PM, Lan Nhi : yes i understand thank you very much June 7, 2025 at 1:57 PM, Mohammad Amir : You are welcome! June 7, 2025 at 1:59 PM, 권기홍 : 다른 라인들 거의 다 차있고 VD도 원활해서 3라인 돌려도 될 것 같습니다. June 7, 2025 at 2:00 PM, 전 운 (Jeon Woon) : 후창고 건조분 생각하셔야할거 같은데요. June 7, 2025 at 2:00 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check C1STKA71_C01/C02 these cranes are inactive. And as result materials recovery has stopped. Please make these cranes active again. Thank you very much! June 7, 2025 at 2:01 PM, Csanálosi Gábor FA : They working as i see June 7, 2025 at 2:02 PM, 김대웅 Kim Daewung : Pre STK에서 ST으로 공급 가능한 음극 플레이트 30개 넘어가면 돌리려했는데, 의견주신대로 3라인도 가동하겠습니다 June 7, 2025 at 2:02 PM, 권기홍 : 넵 감사합니다. June 7, 2025 at 2:02 PM, Mohammad Amir : @FA @Zulaa/졸라/Ivancsa FA Please check C1STKA72_P09/10 ther is Light Curtain error. Job for AGV#8 is pending. Thank you very much! June 7, 2025 at 2:02 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 2:42 PM, 김지수PM(Gyuri)_FA : @fa please check c1cnv072 June 7, 2025 at 2:43 PM, 김지수PM(Gyuri)_FA : Same problem with air fitting? June 7, 2025 at 2:45 PM, Hữu Thắng : @Fa Vd an KA72 AGV#8 stopped . Can u plz check it . Thank you June 7, 2025 at 2:55 PM, 김현태 : NC Ca AGV #6 error. Thanks2 June 7, 2025 at 3:02 PM, 김지수PM(Gyuri)_FA : @fa please check c1stka71 thanks June 7, 2025 at 3:02 PM, Lan Nhi : @hello. please check agv #6 is having an error at line 6, machine 2. error is in outline June 7, 2025 at 3:13 PM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 5-7 empty. Please job cancel. June 7, 2025 at 3:13 PM, 김지수PM(Gyuri)_FA : @Csanálosi Gábor FA could you please help our supporter? June 7, 2025 at 3:14 PM, Szücs Géza FT-B : @Kovács Ágnes léhyszives June 7, 2025 at 3:14 PM, Kovács Ágnes : Going June 7, 2025 at 3:15 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 7, 2025 at 3:19 PM, Tuya Ivancsa FA : @Mohammad Amir VD AN The chamber 5-7 empty pls delete job AGV2 June 7, 2025 at 3:19 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 18 • Cathode: 164 GF NC reel Available :- • AN: 149 • CA: 159 Thank you very much! June 7, 2025 at 3:19 PM, Mohammad Amir : Sure, Checking! June 7, 2025 at 3:20 PM, Hữu Thắng : @FA NC AN Line 6 AGV#1 stopped . Plz check it . thank u June 7, 2025 at 3:21 PM, Mohammad Amir : Job has been cancelled as requested ✅ Thank you! June 7, 2025 at 3:21 PM, Kovács Ágnes : Going June 7, 2025 at 3:24 PM, Kovács Ágnes : Solved June 7, 2025 at 3:24 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 3:42 PM, Szücs Géza FT-B : LTA0066 is a NG reel tray @Mohammad Amir Could you let me know when this Reel tray arrives at one of the NC manual ports? June 7, 2025 at 3:43 PM, Mohammad Amir : Checking June 7, 2025 at 3:47 PM, Mohammad Amir : It has arrived on E0CNVA52_M03 at 13:45 PM Today. Feel free to contact me if you need more information. Thank you very much! June 7, 2025 at 3:49 PM, Szücs Géza FT-B : This tray gets stuck when there is Reel on it. Today is the 2nd time it has gotten stuck on the slitt cv. June 7, 2025 at 3:50 PM, Szücs Géza FT-B : we need take out this tray. June 7, 2025 at 3:51 PM, Mohammad Amir : Yes ,I have also witnessed this phenomenon. Thank you very much! June 7, 2025 at 3:51 PM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 5-2/P02, P01 empty. Please job cancel. June 7, 2025 at 3:53 PM, Mohammad Amir : Job has been cancelled as requested ✅ Thank you! June 7, 2025 at 3:58 PM, 조수형팀장 SKO/FA운영팀 : @김대웅 Kim Daewung 안녕하세요? 수고 많으십니다. 어제, 오늘 FA 개선점을 적용했습니다. 전 공정에서 후 공정으로 균형을 맞추어 물류 흐름을 원활히 할 목적입니다. -NC, VD, ST AGV 로직 -창고 입/출고 우선순위 아직 후창고 재고나 전창고 공매거진 재고가 부족하여 균형이 깨지기 쉬운 상태입니다. 현장에서 체감하는 점이나 개선 의견 주시면 참고하고 싶습니다. 감사합니다. June 7, 2025 at 4:04 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 7, 2025 at 4:07 PM, Kovács Ágnes : Solved June 7, 2025 at 4:07 PM, Mohammad Amir : @FA @Kovács Ágnes Please check C1STKA71(P14~20) all ports shows Output H/S OFF Error. Thank you very much! June 7, 2025 at 4:07 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 4:10 PM, Zulaa/졸라/Ivancsa FA : @MCS VD an chamber 1-7 empty. Please job cancel agv 10. June 7, 2025 at 4:11 PM, 김대웅 Kim Daewung : 안녕하세요, 이미 저보다 잘알고 개선하고 계실것 같습니다만.. 오늘 제가 봤을때 GF 음극 노칭 설비에 매거진 컨베어 로딩/언로딩이 늦어서 노칭 설비 비가동이 발생하고 있었습니다. 이에 AGV 상황을 보니, AGV들끼리 동선이 곂쳐서 이동하지 못하고 Idle 상태인 AGV가 많았습니다.(전창고 로봇 근처) 전창고 로봇 근처에 AGV가 몰리는 것은 어쩔수없다고 생각하는데, 전창고 로봇이 빨라질 수 있으면 좋을 것 같습니다. 음극VD AGV 7대 운영에서 10대 운영으로 전환 후 물류 지연이 많이 해결되었는데, 1-6라인 전체 대응하려면 VD에 AGV가 몇대여야 정상인건가요? 물류 capa에 영향없게, 가동 AGV 개수 관리를 해주셔야할 것 같습니다. June 7, 2025 at 4:11 PM, Mohammad Amir : Job has been cancelled as requested ✅ Thank you! June 7, 2025 at 4:16 PM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check VC06 GF AN VD June 7, 2025 at 4:25 PM, Mohammad Amir : @FA @Kovács Ágnes Please check C1CNV072_P36 there Is INV-01 Runtime Over error and it has blocked the stacking materials delivery. Please check the issue on priority. Thank you very much! June 7, 2025 at 4:27 PM, 조수형팀장 SKO/FA운영팀 : 의견 감사합니다. 전창고 AGV 로직은 오늘 13시경 변경했고, 로봇 속도는 단계적으로 조금씩 올리고 있습니다. VD AGV는 대수와 알람 저감 활동과 더불어 병렬로 처리 할 수 있는 시스템 로직 개선을 검토하고 있습니다. 좋은 의견 있으시면 언제든 말씀해 주세요 June 7, 2025 at 4:27 PM, Csanálosi Gábor FA : Omw June 7, 2025 at 4:29 PM, Szücs Géza FT-B : mol June 7, 2025 at 4:42 PM, 김현태 : VD Ca AGV #3 error. Thanks2 June 7, 2025 at 4:44 PM, Mohammad Amir : @FA @Pintye Miklós FA. Please check E0STKA52_C01 there is Load Oversize error. Thank you! June 7, 2025 at 4:44 PM, Mohammad Amir : @Kovács Ágnes please check. Thank you! June 7, 2025 at 4:46 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 43 • Cathode: 03 Post STK > Stacking • Anode: 07 • Cathode: 169 GF NC reel Available :- • AN: 150 • CA: 145 Thank you very much! June 7, 2025 at 4:46 PM, 김현태 : @MCS Please check VD CA 1-9 #09 half chamber. June 7, 2025 at 4:47 PM, Mohammad Amir : There is an active LR as soon as materials will be available jobs will be created for the remaining half chamber. Thank you very much! June 7, 2025 at 4:48 PM, 김현태 : Thanks you very much June 7, 2025 at 4:48 PM, Mohammad Amir : You are most welcome! June 7, 2025 at 4:58 PM, Mohammad Amir : @FA @Kovács Ágnes @Csanálosi Gábor FA Please check this issue still exists since 16:41. Thank you! June 7, 2025 at 5:09 PM, Csanálosi Gábor FA : Done June 7, 2025 at 5:10 PM, Mohammad Amir : Köszönöm szepen 🙏. June 7, 2025 at 5:11 PM, Mohammad Amir : @FA @Csanálosi Gábor FA Please check E0CNVC52 _RTV01 there is Data Loss Error. Thank you very much! June 7, 2025 at 5:12 PM, Csanálosi Gábor FA : Already done June 7, 2025 at 5:12 PM, Mohammad Amir : Nagyon szépen köszönöm a gyors intézkedést.🙏 June 7, 2025 at 5:25 PM, 김지수PM(Gyuri)_FA : @mcs please transport unk magazine plates on the vc01 vc03 to the C72 (GF VD AN) June 7, 2025 at 5:25 PM, Mohammad Amir : Sure Sir, Working on it. June 7, 2025 at 5:29 PM, Mohammad Amir : Issue has been resolved ✅. AGVs have started to move. Thank you very much! June 7, 2025 at 5:31 PM, Betti B SL : L6 ST #3 AGV stopped June 7, 2025 at 5:48 PM, Mohammad Amir : @FA Please check C1STKA72_C01 travel first movement error. Thank you very much! June 7, 2025 at 5:55 PM, Anita Mirosnicsenko : Hello! Line 2, AGV# 10 stopped, please check. Thank you! June 7, 2025 at 5:59 PM, Nandia FA : please delete job AGV#01 (MCS) June 7, 2025 at 6:00 PM, VK (mcs) : Can you please tell me which area? June 7, 2025 at 6:02 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+2: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 7, 2025 at 6:04 PM, Nandia FA : VD AN C1VDA070_P4 June 7, 2025 at 6:06 PM, VK (mcs) : Job canceled June 7, 2025 at 6:16 PM, 이도형 (Lee) : @MCS @FA PM CIM UI ID / Password Operator/ operator "I cannot access the system. Please check and take the necessary actions." June 7, 2025 at 6:17 PM, VK (mcs) : @FA Please check Anode reel STK A52 -C01 Load oversize error. June 7, 2025 at 6:18 PM, P.Bence A SSL : Please check again thank you ! June 7, 2025 at 6:21 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 44 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 159 GF NC reel Available :- • AN: 151 • CA: 153 June 7, 2025 at 6:22 PM, 이도형 (Lee) : Done June 7, 2025 at 6:45 PM, VK (mcs) : @Manufacturing Please check Circular conveyor C1CNV072 -M04 1+ 5 carriers are waiting. Thx June 7, 2025 at 8:15 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16142) Carrier does not move. June 7, 2025 at 8:24 PM, Zaya/ivancsa FA : solved June 7, 2025 at 8:29 PM, VK (mcs) : @FA Please check Cathode reel STK C51 Inactive stop June 7, 2025 at 8:42 PM, 이도형 (Lee) : @FA VD An Agv #9 Please check June 7, 2025 at 8:50 PM, VK (mcs) : @FA Please check this issue. Thx June 7, 2025 at 9:08 PM, P.Bence A SSL : Check again please thank you ! June 7, 2025 at 9:09 PM, 이도형 (Lee) : @FA VD 전창고 Please check C1STKA71 June 7, 2025 at 9:13 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 13 • Cathode: 13 Pre STK > VD • Anode: 44 • Cathode: 00 Post STK > Stacking • Anode: 01 • Cathode: 135 GF NC reel Available :- • AN: 159 • CA: 143 June 7, 2025 at 9:51 PM, 정은탁 (Jung EunTak) : @FA NC Ca 2-1 AGV #6 LR Error. Please Check. June 7, 2025 at 9:58 PM, 이도형 (Lee) : @FA VD An Agv #6 Please check June 7, 2025 at 10:19 PM, Zaya/ivancsa FA : This message was deleted. June 7, 2025 at 10:22 PM, 이도형 (Lee) : @FA NC AN 3-2 Out C3NCA020_ P02 Diverter Occasional movement disorder Inspection request June 7, 2025 at 10:55 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 Carrier on RTV is not transferred. June 7, 2025 at 11:31 PM, VK (mcs) : @FA There is a transfer Job from anode Post-STK A72 to manual port M02 It's UNKEMP- carrier SCS indicates EMPTY error in remark. Please check June 7, 2025 at 11:41 PM, VK (mcs) : @FA Same issue now on cathode side LTC0642 doesn't transfer. Please check it. Thx June 7, 2025 at 11:46 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 19 • Cathode: 17 Pre STK > VD • Anode: 62 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 133 GF NC reel Available :- • AN: 162 • CA: 157 June 7, 2025 at 11:58 PM, 이주봉PM LEE JUBONG(FA) : @이도형 (Lee) GF VD 양극 Empty 대차 모여놓은곳에 MlC 4194 중복 바코드 플레이트 보관해놓았습니다. 확인 부탁드립니다. June 8, 2025 at 12:00 AM June 8, 2025 at 12:00 AM, 이주봉PM LEE JUBONG(FA) : FA 삼구 김종원사원이 전달해드릴거에요. 참고 부탁드려요 June 8, 2025 at 12:17 AM, VK (mcs) : @FA Please check this issue still not solved. Due to that there is a low Amont of empty cathode trays on Slitter side. Thx June 8, 2025 at 12:17 AM, 이도형 (Lee) : 해결됨 June 8, 2025 at 12:52 AM, Barta Rudi : @VK (mcs) Hello. No cathode reel is arriving to lines 2, 3, and 6. Could you check what might be the reason? Thank you. June 8, 2025 at 12:54 AM, VK (mcs) : There is an issue in RTV and I already inform to FA team. @Mr.Miti (미티) FA Can you check Cathode reel conveyor C52 There is carrier on RTV and it doesn't transfer for almost 2 hours. Thx June 8, 2025 at 1:01 AM, Mr.Miti (미티) FA : Yes June 8, 2025 at 1:05 AM, Anita Mirosnicsenko : Hello! Line 1 STK AGV#3 stopped, please check! thank you! June 8, 2025 at 1:16 AM, Elena Dzhul : Hello! AGV4 stopped at L6/4,please check June 8, 2025 at 1:19 AM, Anita Mirosnicsenko : Line1 AGV# 6 stopped, please check, thank you! June 8, 2025 at 1:20 AM, Anita Mirosnicsenko : AGV #5 sorry June 8, 2025 at 1:23 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 12 • Cathode: 20 Pre STK > VD • Anode: 67 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 135 GF NC reel Available :- • AN: 172 • CA: 158 June 8, 2025 at 1:34 AM, 이도형 (Lee) : @FA NC Ca #2 Robot is stopped. Please check June 8, 2025 at 1:38 AM, Eduard SL Shift A : Line 6 ST3 AGV4 stopped please check June 8, 2025 at 1:47 AM, Eduard SL Shift A : Line 6 ST3 AGV4 stopped please check June 8, 2025 at 2:06 AM, Barta Rudi : @FA NC AN AGV 7 stop, please check, thank you June 8, 2025 at 2:07 AM, 김수민 : @이주봉PM LEE JUBONG(FA) 음극 노칭 agv#7호기 ur 작업중 포크 전진 상태로 에러 발생했습니다. June 8, 2025 at 2:10 AM, 김수민 : @이주봉PM LEE JUBONG(FA) - 음극 노칭 3-2 풀매거진 포트 배출지연으로 인한 설비정지 02:05~ - 풀매거진 아웃포트 P01,02 12MGZ UR작업 안합니다. 확인 부탁드립니다. June 8, 2025 at 2:13 AM, Nguyên : NC AN GF 3/1 AGV#7 Error June 8, 2025 at 2:14 AM, 김수민 : @이주봉PM LEE JUBONG(FA) Agv#7호기 에러 때문에 길 막혀서 AGV#8,2,10 명령 수행 못하고 있습니다. 확인부탁드립니다 June 8, 2025 at 2:17 AM, 김수민 : @이주봉PM LEE JUBONG(FA) 음극 노칭 agv#1 풀매거진 6개 들고 목적지없이 충전중입니다. 확인부탁드립니다 June 8, 2025 at 2:21 AM, VK (mcs) : @FA Please check Cathode reel conveyor C52 Carrier on RTV doesn't unload on M10 (9037) June 8, 2025 at 2:28 AM, VK (mcs) : @FA Please check Anode Post-STK A72 -C01 Inactive stope. June 8, 2025 at 2:30 AM, 이주봉PM LEE JUBONG(FA) : @김수민 노칭 전부다 조치 했어요 June 8, 2025 at 2:39 AM, VK (mcs) : @FA Please check upper cases. Carriers are waiting on conveyor. Thx June 8, 2025 at 2:44 AM, Barta Rudi : NC CA 3/2 AGV1 stop, please check, thank you June 8, 2025 at 2:46 AM, 지석범PM (이반차FA) : 양극 VD#24 3-6라인 VD설비 PIO 좌우측 반대로 출력 살려서 자동 반송 불가합니다. June 8, 2025 at 2:48 AM, Barta Rudi : @FA It’s blocking the other AGVs, could someone please check it? June 8, 2025 at 2:48 AM, VK (mcs) : This message was deleted. June 8, 2025 at 3:09 AM, Nguyên : AN GF NC why not give empty tray to 1/1 Come check for me June 8, 2025 at 3:11 AM, 이주봉PM LEE JUBONG(FA) : @최정한.KOVA 양극 VD#24 3-6라인 VD설비 PIO 좌우측 반대로 출력 살려서 자동 반송 불가합니다. 확인 부탁드립니다. June 8, 2025 at 3:21 AM, VK (mcs) : @FA Please check it. Problem still not solved. June 8, 2025 at 3:23 AM, Nguyên : NC AN GF Robot#3 error June 8, 2025 at 3:28 AM, P.Bence A SSL : L1 stacking anode mgz delivery very slow please check . June 8, 2025 at 3:29 AM, P.Bence A SSL : @VK (mcs) June 8, 2025 at 3:31 AM, P.Bence A SSL : L4-5-6 stacking magazin delivery very slow check please thank you . June 8, 2025 at 3:33 AM, VK (mcs) : There was an error in anode Post-STK. Right now everything is normal but also there is no available anode material. June 8, 2025 at 3:36 AM, VK (mcs) : Can someone please check actual carrier in circular conveyor C1CNV072 port 31(16027)? Is it MLA0127? June 8, 2025 at 3:37 AM, P.Bence A SSL : Yes MLA0127 June 8, 2025 at 3:37 AM, VK (mcs) : Thank you June 8, 2025 at 3:38 AM, P.Bence A SSL : Is Agv coming? June 8, 2025 at 3:41 AM, P.Bence A SSL : Agv hasn't come for the anode magazines for 10 minutes.. port 31 June 8, 2025 at 3:41 AM, VK (mcs) : Available anode material is zero. Materials are transferred to Stacking as soon as they are stored in STK. June 8, 2025 at 3:42 AM, P.Bence A SSL : MLA0127 waiting for Agv .. June 8, 2025 at 3:42 AM, VK (mcs) : I transferred back to STK. there is some issue with this carrier. June 8, 2025 at 3:42 AM, P.Bence A SSL : Yes I see June 8, 2025 at 3:42 AM, Spilka Sofia : Line 1 ST AGV 10 Stopped pls check,thank you June 8, 2025 at 3:43 AM, Spilka Sofia : STK #8 June 8, 2025 at 3:58 AM, Barta Rudi : @FA Vd An 1-4 AGV stop, please check, thank you June 8, 2025 at 3:58 AM, P.Bence A SSL : L6 left side empty full mgz not coming check please …. June 8, 2025 at 4:01 AM, VK (mcs) : One job assigned to C6STM 160/P01 June 8, 2025 at 4:03 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 24 Pre STK > VD • Anode: 86 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 101 GF NC reel Available :- • AN: 156 • CA: 173 June 8, 2025 at 4:09 AM, 이도형 (Lee) : @FA VD An #8 AGV is stopped. Please check. June 8, 2025 at 4:14 AM, P.Bence A SSL : I don't understand, 2 lines are working on L1-2 and the anode is on the ports, why is Agv so slow when L3 is off?!! June 8, 2025 at 4:16 AM, P.Bence A SSL : Multiple line stops are not possible because there are anode magazines on the ports... It has to supply 2 lines, yet it's all slow. June 8, 2025 at 4:19 AM, VK (mcs) : MLA4096 arrived to conveyor port at 4:12:48:422 And AGV assigned 4:12:48:455 After 3 minutes AGV arrived to conveyor port at 4:15:21.261 June 8, 2025 at 4:21 AM, P.Bence A SSL : No more Agvs will arrive on line 6, if this continues like this, the line will stop. June 8, 2025 at 4:21 AM, VK (mcs) : I understand but 5 lines working now and sadly there is not sufficient anode material. June 8, 2025 at 4:22 AM, P.Bence A SSL : I understand that, but the supply of L4-5 material is more stable than L6 at the moment. Please prioritize the delivery of the L6 magazine. June 8, 2025 at 4:24 AM, VK (mcs) : Materials are allocated based on the priority of the request. RTD received LR for those port before than line 6 that’s why . But I will prioritise some of them. June 8, 2025 at 4:26 AM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. 챔버 충돌 발생 June 8, 2025 at 4:30 AM, Barta Rudi : @FA Ca VD AGV 9 stop please check thank you!!! June 8, 2025 at 4:33 AM, Chinges Fa : Solved June 8, 2025 at 4:42 AM, P.Bence A SSL : @VK (mcs) Are L6 requests currently prioritized? June 8, 2025 at 4:43 AM, VK (mcs) : Yes I did. June 8, 2025 at 4:47 AM, Barta Rudi : @FA NC CA 3/2 AGV 8 stop, please check thank you!!! June 8, 2025 at 5:00 AM, Barta Rudi : @FA CA VD AGV 5 stop please check thank you!!! June 8, 2025 at 5:03 AM, Chinges Fa : Solved June 8, 2025 at 5:10 AM, P.Bence A SSL : L6 magazine supply unchanged... June 8, 2025 at 5:10 AM, Barta Rudi : @VK (mcs) Please send an AGV to the Cathode #35 4-8 VD machine and use it to transfer the magazines to the warehouse. There is a tray sensor error — the technician will fix it. Thank you. June 8, 2025 at 5:12 AM, Barta Rudi : @FA CA VD AGV 9 stop please check thank you!!! June 8, 2025 at 5:15 AM, VK (mcs) : @FA Please check it June 8, 2025 at 5:16 AM, VK (mcs) : 2 materials already transferred and another is on the way. June 8, 2025 at 5:23 AM, Barta Rudi : No need to unload, the problem has been resolved. Thank you June 8, 2025 at 5:47 AM, 정은탁 (Jung EunTak) : VD Ca AGV #7 Error. Please Check. June 8, 2025 at 5:48 AM, Zaya/ivancsa FA : no error June 8, 2025 at 6:04 AM, 김정희(Jeong hee FA) : dayshift FA "A" Schedule Date: 2025.06.08 Time:06:00~18:00 전극 - GF 최명운,김정희 (CHOI Myoungwoon) (Kim jeong hul) June 8, 2025 at 6:06 AM, 인제(Hwang) : VD An AGV#6 Error June 8, 2025 at 6:06 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 Run time over error. Thank you June 8, 2025 at 6:08 AM, Shakir (MCS) : @FA Please check C1CNV072_16_144, data mismatch error. Thank you June 8, 2025 at 6:09 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.08. 9+3+1/12+1 Tech, 1Sl, 1Sup. Overtime(3): Szabadi Miklós, Marsi Gábor, Harasztia Zoltán Holiday(1+1): Gerbovits Kevin, 방혁_이반차 (Bang Hyuk) Sick(2): Takács Ádám, Czeilinger Krisztián Shift Change(1): Böröczki Balázs --------------- Electrode(4): Pálosi Róbert, Rácz Dániel, Szabadi Miklós, Marsi Gábor --------------- Assy GF (3): Csanálosi Gábor, Denkó János, Böröcz Tamás --------------- Assy 1F (2): Pintye Miklós, Kovács Ágnes ---------- June 8, 2025 at 6:11 AM, Hữu Thắng : @FA NC AN Robot#2 Clamping moving alarm . Plz check June 8, 2025 at 6:13 AM, 인제(Hwang) : Please check Job of the half chamber VD An 2-1(#10) LR VD An 2-5(#14) LR VD An 2-9(#18) LR VD An 3-3(#21) LR VD An 6-8(#53) UR June 8, 2025 at 6:13 AM, Csanálosi Gábor FA : Coming June 8, 2025 at 6:13 AM, Csanálosi Gábor FA : Coming June 8, 2025 at 6:17 AM, Shakir (MCS) : Job exists for mentioned VD chamber unfortunately, All the AGVs are busy right now. Thank you June 8, 2025 at 6:19 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 8, 2025 at 6:19 AM, Shakir (MCS) : Checking sir June 8, 2025 at 6:22 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 41 • Cathode: 32 Pre STK > VD • Anode: 68 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 81 GF NC reel Available :- • AN: 142 • CA: 166 June 8, 2025 at 6:26 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 8, 2025 at 6:30 AM, Csanálosi Gábor FA : Done June 8, 2025 at 6:30 AM, Csanálosi Gábor FA : Done June 8, 2025 at 6:30 AM, Csanálosi Gábor FA : Done June 8, 2025 at 6:36 AM, 김지수PM(Gyuri)_FA : @fa could you please check the C1CNV071 12037 track? Still remaining as manual since 6:03am. Thanks June 8, 2025 at 6:36 AM, Csanálosi Gábor FA : Checking June 8, 2025 at 6:43 AM, Hữu Thắng : @FA NC AN Line 2/2 AGV#4 stopped . Plz check it June 8, 2025 at 6:43 AM, Csanálosi Gábor FA : MLA4248 Had one magazine fell off, and got stucked. Solved. June 8, 2025 at 6:44 AM, 김지수PM(Gyuri)_FA : Köszönöm szépen! June 8, 2025 at 6:56 AM, Hữu Thắng : @FA VD AN 6/6 Agv#6 error . Plz check June 8, 2025 at 7:08 AM, Shakir (MCS) : @FA Please check C1STKA71_P20/19 there is Light curtain error. Thank you June 8, 2025 at 7:23 AM, 김현태 : @김지수PM(Gyuri)_FA VD Ca Chamber 3-6 (#24) 메뉴얼 건조 진행 중 메뉴얼 반송 요청드립니다 June 8, 2025 at 7:23 AM, 김지수PM(Gyuri)_FA : 넵 알겠습니다. June 8, 2025 at 7:24 AM, 김정희(Jeong hee FA) : GF_A VD AGV#05 SKT72 port#19.20 Light curtain 가이드랑 충돌 ERR:BAT#2 Comm Time 발생으로 몽골작업자 navitrol 위치지정후 가동했으나충돌발생했습니다(node.muting이상) June 8, 2025 at 7:26 AM, 김정희(Jeong hee FA) : 정정합니다 skt71번 창고입니다 June 8, 2025 at 7:29 AM, 김현태 : NC CA AGV #6 error. Thanks June 8, 2025 at 7:31 AM, 김지수PM(Gyuri)_FA : 3 호기 8호기 이동 중 입니다. June 8, 2025 at 7:31 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 28 • Cathode: 24 Pre STK > VD • Anode: 68 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 95 GF NC reel Available :- • AN: 140 • CA: 180 June 8, 2025 at 7:31 AM, Hữu Thắng : @MCS VD AN these chamber only 2 plates . Could u plz check it Thank u 1/8 2/1 ~ plz recheck 2/5 ~ plz recheck 2/9 ~ plz recheck 3-5 3/6 June 8, 2025 at 7:34 AM, Shakir (MCS) : All have job, currently all AGVs are busy. Thank you June 8, 2025 at 7:56 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 Run time over error. Thank you June 8, 2025 at 7:58 AM, Shakir (MCS) : @FA Please check E0STKC51_C02 there is ready off during Forking error. Thank you! June 8, 2025 at 8:01 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 , BP09 Run time over error. Thank you June 8, 2025 at 8:05 AM, 김지수PM(Gyuri)_FA : [양극VD 1-2] 데이터상 1시18분 건조 시작 > 5시13분 건조 완료인데, 5:51:14초에 다시 건조 시작으로 나옵니다. 그래서 AGV반송이 불가능한 상태인데 확인 좀 부탁드리겠습니다. June 8, 2025 at 8:09 AM, Lan Nhi : @FA Hello. Please check machine 1-2(#2) Example/Ca has sensor error. Thanks June 8, 2025 at 8:10 AM, Böröcz Tamás : No hablo español. June 8, 2025 at 8:28 AM, Shakir (MCS) : @FA Please check C1CNV072_16_169 ready off error. Thank you June 8, 2025 at 8:30 AM, Szücs Géza FT-B : Kemence hiba nem az FA-hoz tartozik June 8, 2025 at 8:33 AM, Shakir (MCS) : @FA Please check C1STKA71_M01 light curtain error. Thank you June 8, 2025 at 8:39 AM, 인제(Hwang) : NC Ca AGV#8 Error June 8, 2025 at 8:39 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKC51_C02 thanks! June 8, 2025 at 8:44 AM, Lan Nhi : @FA Sorry. Machine 1-2(#02) has a sensor error. Please let AGV take the goods out for me so the technician can fix the machine. Thank you. June 8, 2025 at 8:45 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 15 Pre STK > VD • Anode: 69 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 121 GF NC reel Available :- • AN: 149 • CA: 199 June 8, 2025 at 8:46 AM, 김지수PM(Gyuri)_FA : @FA please help our korean supporter 🥲 June 8, 2025 at 8:53 AM, Böröcz Tamás : Solved June 8, 2025 at 8:53 AM, Böröcz Tamás : We just left Baek to get some tools June 8, 2025 at 8:54 AM, Shakir (MCS) : @Csanálosi Gábor FA Please check this error, Reel delivery AN stopped. Thank you June 8, 2025 at 9:03 AM, Baek Hojong(백호종)FA : Explain to me why the crane won't move and what to do about it. June 8, 2025 at 9:04 AM, Csanálosi Gábor FA : Coming June 8, 2025 at 9:07 AM, Hữu Thắng : @MCS Could u plz check UR NC AN 5/2 . 5/3 . Thanks June 8, 2025 at 9:07 AM, Shakir (MCS) : Checking June 8, 2025 at 9:11 AM, Shakir (MCS) : UR received, Job exists for 5/2,5/3 Thank you June 8, 2025 at 9:11 AM, Csanálosi Gábor FA : Done June 8, 2025 at 9:15 AM, 조한진(Jin) : 후창고에 음극 Pull plate 실물은 더 있는것 같은데 확인 부탁 드립니다. June 8, 2025 at 9:28 AM, 김현태 : VD AN AGV #02 error Thanks June 8, 2025 at 9:29 AM, 김지수PM(Gyuri)_FA : SCS상 후창고에 자재가 있어도, RTD상 위치랑 맞지가 않으면 스택으로 공급이 불가능합니다. June 8, 2025 at 9:30 AM, Csanálosi Gábor FA : Done June 8, 2025 at 9:32 AM, 김현태 : again June 8, 2025 at 9:33 AM, Csanálosi Gábor FA : Coming June 8, 2025 at 9:34 AM, Hữu Thắng : @Fa Can you come to NC AN Line 3/2 please . The magazines can not move to OUT C/V . June 8, 2025 at 9:34 AM, Csanálosi Gábor FA : Coming soon June 8, 2025 at 9:35 AM, Hữu Thắng : Thanks June 8, 2025 at 9:41 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 09 Pre STK > VD • Anode: 71 • Cathode: 02 Post STK > Stacking • Anode: 02 • Cathode: 138 GF NC reel Available :- • AN: 165 • CA: 198 June 8, 2025 at 9:47 AM, Shakir (MCS) : @Fa Please check C1STKC72_P12/11 data mismatch error. Thank you June 8, 2025 at 9:48 AM, Csanálosi Gábor FA : Coming June 8, 2025 at 9:54 AM, Csanálosi Gábor FA : Done June 8, 2025 at 10:10 AM, 인제(Hwang) : VD An AGV#3 Error June 8, 2025 at 10:11 AM, Shakir (MCS) : @FA Fork2 Inplace abnormal alarm. June 8, 2025 at 10:17 AM, Shakir (MCS) : @FA Please check C1STKA71_P18/17, P20/P19, there is Light curtain error. Thank you June 8, 2025 at 10:45 AM, Shakir (MCS) : @FA Please check C1STKA71_P14/13, there is Light curtain error. Thank you June 8, 2025 at 10:49 AM, 인제(Hwang) : Please reset the password for the RTD “TEMP” ID June 8, 2025 at 10:50 AM, Hữu Thắng : @FA VD AN AGV#4 stopped in front KA71 . Plz check June 8, 2025 at 10:50 AM, Shakir (MCS) : Password has been initiated. Thank you June 8, 2025 at 10:52 AM, Khaliun/Ivancsa FA : we are working here June 8, 2025 at 10:59 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 07 Pre STK > VD • Anode: 68 • Cathode: 00 Post STK > Stacking • Anode: 01 • Cathode: 144 GF NC reel Available :- • AN: 169 • CA: 200 June 8, 2025 at 11:44 AM, 김지수PM(Gyuri)_FA : Please check the sensor of cathode 6-2 VD chamber. Drying process started at 5:47 and it this one sent the start signal again 6:22. But also P1, 2, 3 sent the unload complete signal(6:22am) even if there were carriers June 8, 2025 at 11:45 AM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 누가 조치를 해야하는건가요? 한국진공? June 8, 2025 at 11:46 AM, 김지수PM(Gyuri)_FA : 네, 맞습니다. June 8, 2025 at 11:51 AM, Tuya Ivancsa FA : VD AN 71 error June 8, 2025 at 12:13 PM, Shakir (MCS) : @FA Please check C1CNV072_16_146 data mismatch error. Thank you June 8, 2025 at 12:17 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 03 Pre STK > VD • Anode: 82 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 143 GF NC reel Available :- • AN: 152 • CA: 224 June 8, 2025 at 12:53 PM, Shakir (MCS) : @FA Please check C1STKC71_P18/17, there is Light curtain error. Thank you June 8, 2025 at 12:53 PM, Shakir (MCS) : @FA C1CNV072_M02 : Data mismatch error June 8, 2025 at 12:54 PM, Csanálosi Gábor FA : An gv is in error, probably thats couse, i bet @Khaliun/Ivancsa FA Is around and dealing with it. June 8, 2025 at 1:06 PM, 김희래 : @FA AN VD AGV 9 PIO ERROR. Please check. June 8, 2025 at 1:20 PM, 인제(Hwang) : NC An AGV#6 Error June 8, 2025 at 1:30 PM, 김희래 : @FA AN VD AGV 3 PIO ERROR. Please check. June 8, 2025 at 1:37 PM, 김지수PM(Gyuri)_FA : @fa please check Vc03 in GF anode VD June 8, 2025 at 1:40 PM, Debreczeni Ármin : Agv #6 got problem at line 3 stacking June 8, 2025 at 1:42 PM, Debreczeni Ármin : Agv #5 stucked line 5 st June 8, 2025 at 1:49 PM, 김지수PM(Gyuri)_FA : @fa please check c1cnv072 16155 June 8, 2025 at 1:58 PM, Debreczeni Ármin : Can you send new status please? June 8, 2025 at 1:58 PM, Hữu Thắng : @FA NC AN Line 1 AGV6 stopped . Plz check June 8, 2025 at 2:08 PM, 김지수PM(Gyuri)_FA : 순환물류CNV 음극M04 8개 빠져야합니다... June 8, 2025 at 2:18 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 03 • Cathode: 04 Pre STK > VD • Anode: 100 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 101 GF NC reel Available :- • AN: 162 • CA: 262 June 8, 2025 at 2:20 PM, 인제(Hwang) : Please check LR of the half chamber VD An 3-1(#19) VD An 4-3(#30) VD An 6-4(#49) June 8, 2025 at 2:36 PM, Shakir (MCS) : Please Press LR for all VD half chamber. Sorry for delay working on other case Thank you June 8, 2025 at 2:40 PM, 인제(Hwang) : Please recheck LR June 8, 2025 at 2:40 PM, 심재훈 : Anode 5-5, it has been more than 30mins since the machine request unloading June 8, 2025 at 2:40 PM, 심재훈 : Please check agv June 8, 2025 at 2:40 PM, Shakir (MCS) : Checking June 8, 2025 at 2:42 PM, Shakir (MCS) : Job initiated for all half chamber June 8, 2025 at 2:44 PM, Shakir (MCS) : All STK inbound ports are busy, Job exits for 5-5 chamber. June 8, 2025 at 3:01 PM, 심재훈 : @Baek Hojong(백호종)FA 피엠님, vd후창고에 구석에 있는 플레이트는 왜 배출이 안되는 거에요? 지금 1~3라인 다 정지해 있어서 후창고에 있는건 계속 나가야 할 것 같은데 30분 넘게 가져가질 않네요 June 8, 2025 at 3:02 PM, Baek Hojong(백호종)FA : 바로 확인하겠습니다 피엠님 June 8, 2025 at 3:02 PM, 심재훈 : Mgz 3427, 5146, 3176이 들어있는 플레이트 입니다. June 8, 2025 at 3:27 PM, Hữu Thắng : @FA VD AN Warehouse KA71 Alarm . Could u plz check it . Thank u June 8, 2025 at 3:27 PM, Csanálosi Gábor FA : Coming June 8, 2025 at 3:27 PM, 심재훈 : 지금 1,2,3라인 후창고 뒤에 컨베이어 다 죽었습니다. June 8, 2025 at 3:28 PM, 심재훈 : 아무것도 움직이질 않는데 아무도 안계시네요 June 8, 2025 at 3:28 PM, 심재훈 : 일부로 세우신 건가요?? June 8, 2025 at 3:30 PM, 심재훈 : 다시 돌아갑니다 June 8, 2025 at 3:30 PM, Hữu Thắng : @MCS Those chamber has been waiting more than 30’ . Could u plz check the UR . 2/4 2/8 4/9 5/1 5/6 June 8, 2025 at 3:32 PM, 심재훈 : Vd후창고에 실매거진 많습니다. 라인 1개는 돌릴 양인데, 반송 가능한지 불가능 한지 확인 부탁 드립니다. 눈으로 보이는 것만 12개 정도 됩니다. June 8, 2025 at 3:34 PM, Hữu Thắng : 5/9 6/3 6/5 6/6 6/8 6/9 i pressed UR . Plz check it . Thank a lot . June 8, 2025 at 3:35 PM, Shakir (MCS) : Press UR only for 2/4, Rest VD machine has UR and job exists but all inbound port of STK Busy. Thank you June 8, 2025 at 3:37 PM, Shakir (MCS) : UR received successfully June 8, 2025 at 3:37 PM, Csanálosi Gábor FA : Done June 8, 2025 at 3:37 PM, Hữu Thắng : Can u recheck UR 2/4 . Thank u June 8, 2025 at 3:38 PM, Shakir (MCS) : UR received June 8, 2025 at 3:54 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 21 Pre STK > VD • Anode: 84 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 100 GF NC reel Available :- • AN: 170 • CA: 263 June 8, 2025 at 3:58 PM, Debreczeni Ármin : Operators told me there is a problem with AN VD manual loading June 8, 2025 at 4:55 PM, Shakir (MCS) : @FA Please check E0STKC52_C01 Load oversize error. Thank you June 8, 2025 at 4:56 PM, Shakir (MCS) : @FA Please check E0STKC51_C01 Hoist driver error. Thank you June 8, 2025 at 4:58 PM, Shakir (MCS) : @FA Please check C1STKC71_C01 Load oversize error. Thank you June 8, 2025 at 4:59 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 TR01 position alarm Thank you June 8, 2025 at 5:00 PM, Csanálosi Gábor FA : @Böröcz Tamás @Denkó Jani (F.A.) June 8, 2025 at 5:00 PM, 김지수PM(Gyuri)_FA : @please check c1stkc71 thanks GF June 8, 2025 at 5:01 PM, Böröcz Tamás : Küldtem likeot csak nem volt térerő June 8, 2025 at 5:02 PM, Khaliun/Ivancsa FA : Solved June 8, 2025 at 5:02 PM, 박시우 : @FA Pleas check C0VGVA01_VC04 and VC01 they are blocked each other June 8, 2025 at 5:06 PM, Denkó Jani (F.A.) : Nyomjuk 😉 June 8, 2025 at 5:07 PM, 인제(Hwang) : NC An AGV#3 Error June 8, 2025 at 5:10 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 07 • Cathode: 24 Pre STK > VD • Anode: 94 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 116 GF NC reel Available :- • AN: 169 • CA: 270 June 8, 2025 at 5:14 PM, Shakir (MCS) : @FA Please check E0CNVC52_09_007 DATA LOSS ERROR Thank you June 8, 2025 at 5:33 PM, Mohammad Amir : @FA Please check this issue still exists since 16:34 for more than one hour and because of this Reels Delivery has been stopped. Please take action. Thank you very much! June 8, 2025 at 5:37 PM, 김지수PM(Gyuri)_FA : @fa E0STKC52 please check this It's been stopping more than 30mins June 8, 2025 at 5:44 PM, 김현태 : NC CA AGV #4 error Thanks June 8, 2025 at 5:58 PM, Nguyên : NC AN GF 1/1 AGV#8 Error June 8, 2025 at 6:09 PM, KIM SEYEON [김세연]_FA : Photo June 8, 2025 at 6:13 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 14 Technician, 1 Sl, 3 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5)+3: Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 8, 2025 at 6:23 PM, Mohammad Amir : @FA @Nagy Tibor Please check Cathode reel conveyor C52 RTV - lift unload destination port auto off alarm. It has blocked reels. Thank you very much! June 8, 2025 at 6:24 PM, 이도형 (Lee) : @FA NC Ca #3 Robot is stopped. Please check June 8, 2025 at 6:52 PM, Anita Mirosnicsenko : Hello! Line 2 stk AGV 2 stopped, please check! Thank you! June 8, 2025 at 7:04 PM, Nagy Tibor : solved June 8, 2025 at 7:05 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 26 Pre STK > VD • Anode: 84 • Cathode: 01 Post STK > Stacking • Anode: 01 • Cathode: 128 GF NC reel Available :- • AN: 183 • CA: 278 Thank you very much! June 8, 2025 at 7:22 PM, Mohammad Amir : @FA @Amgaa FA Please check MLC3163 located at C1CNV072_16_065 ,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue physically on priority. Thank you very much! June 8, 2025 at 7:29 PM, Spilka Sofia : Line 1 ST #8 AGV 10 stopped,pls check Thank you June 8, 2025 at 7:32 PM, Amgaa FA : solved June 8, 2025 at 7:32 PM, Mohammad Amir : Thank you very much 🙏. June 8, 2025 at 7:46 PM, Nguyên : Come check for me AN GF NC 1/1 AGV No take away Thank you June 8, 2025 at 7:50 PM, Mohammad Amir : Good evening, UR received successfully to tranfer full magazine ✅. Waiting for AGVs and Currently all AGVs are busy . Thank you very much! June 8, 2025 at 7:53 PM, P.Bence A SSL : @Mohammad Amir Hello ! The anode magazine is not arriving on the left side of L6, please give it priority, thank you. June 8, 2025 at 7:53 PM, Mohammad Amir : Good evening, Checking! June 8, 2025 at 7:54 PM, Nguyên : Thank you. it has been out of service for a long time so please prioritize it for me June 8, 2025 at 7:55 PM, Mohammad Amir : You are welcome. Sure,I have already provided priority. AGV#6 has been assigned successfully ✅ Thank you very much! June 8, 2025 at 7:56 PM, Mohammad Amir : Three anode carriers on the way with AGV#2 &#4 &#9 ✅. Afterwards we are receiving LR but unfortunately we don't have any Anode materials available in the warehouse currently. Thank you very much! June 8, 2025 at 8:03 PM, Mohammad Amir : Update:- For 1-1 NC AN P01 AGV#1 has also assigned ✅. Thank you very much! June 8, 2025 at 8:15 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 23 Pre STK > VD • Anode: 85 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 140 GF NC reel Available :- • AN: 176 • CA: 278 Thank you very much! June 8, 2025 at 8:21 PM, Nguyên : Please give priority to AGV to pick up goods at 2/2 AN GD NC. Help me. Thanh you June 8, 2025 at 8:22 PM, Mohammad Amir : Sure Checking! June 8, 2025 at 8:26 PM, Mohammad Amir : I have provided priorities to travefer full magazine from 2-2 AN NC. ✅ Currently all AGVs are busy as soon as AGVs will be free it will assign to 2-2 AN NC. I am monitoring. Thank you very much! June 8, 2025 at 8:28 PM, Barta Rudi : @Fa NC CA 2/1 AGV 6 stop, please check , thank you!!! June 8, 2025 at 8:29 PM, Mohammad Amir : @FA @Nagy Tibor Please check E0STKA51_C02 there is Port interface error and also check E0STKA52_C02 there is MCP Auto /Manual mode error. Thank you very much! June 8, 2025 at 8:31 PM, Mohammad Amir : @FA @Amgaa FA Please check NC AN AGV#4 there is Align Sw limit- and AGV#10 fork1 LD/UD req not received error. Thank you very much! June 8, 2025 at 8:33 PM, Barta Rudi : @Amgaa FA June 8, 2025 at 8:34 PM, Nguyên : Thank you June 8, 2025 at 8:34 PM, Mohammad Amir : You are welcome! June 8, 2025 at 8:45 PM, Nguyên : Please give priority to AGV to pick up goods at 3/2 AN GF NC. Help me. Thanh you June 8, 2025 at 8:45 PM, Mohammad Amir : Sure Checking! June 8, 2025 at 8:45 PM, Vékony Ferenc : Kész van! June 8, 2025 at 8:46 PM, Mohammad Amir : I have provided priorities to travefer full magazine from 3-2 AN NC. ✅ Currently all AGVs are busy as soon as AGVs will be free it will assign to 3-2 AN NC. I am monitoring. Thank you very much! June 8, 2025 at 8:46 PM, Mohammad Amir : Köszönöm szepen 🙏. June 8, 2025 at 8:53 PM, 김희래 : @FA An VD AGV#8 is stopped. 3 AGVs are waiting. Please check. June 8, 2025 at 9:03 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 22 Pre STK > VD • Anode: 65 • Cathode: 02 Post STK > Stacking • Anode: 07 • Cathode: 153 GF NC reel Available :- • AN: 170 • CA: 268 Thank you very much! June 8, 2025 at 9:09 PM, 이도형 (Lee) : @FA C1STKC71 is stopped. Please check. June 8, 2025 at 9:11 PM, 김희용 : @Mohammad Amir Please Delete MCS Job Carriar ID : MLA1126 It is in VD EQ June 8, 2025 at 9:11 PM, Mohammad Amir : Sure , Checking! June 8, 2025 at 9:14 PM, Barta Rudi : @Mohammad Amir Hello. The NC Ca 4/2 machine has stopped because it is already full of finished magazines. Please send an AGV to remove the completed magazines. Thank you June 8, 2025 at 9:17 PM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! June 8, 2025 at 9:17 PM, Mohammad Amir : Checking June 8, 2025 at 9:19 PM, Barta Rudi : And the empty magazines are also arriving slowly — please check this as well. Thank you. @Mohammad Amir (Cathode) June 8, 2025 at 9:23 PM, Mohammad Amir : Sorry for late response,I was busy with other task. Issue has been resolved ✅. AGV#3 on the way. Thank you very much! June 8, 2025 at 9:24 PM, Mohammad Amir : @FA @Nagy Tibor Please check Cathode Robot #2(8042) there is plate detect sensor error and it is slowing down empty magazine delivery speed. Thank you very much! June 8, 2025 at 9:26 PM, Mohammad Amir : As soon as empty magazine are arriving at O/P ports of Gantry , it is going to NC CA process ,there was issue with Robot#2 which slowed down empty magazine delivery speed. I informed already to FA about it. I am monitoring. Currently available Empty magazine for NC CA:-15 Thank you very much! June 8, 2025 at 9:28 PM, Nagy Tibor : solved June 8, 2025 at 9:28 PM, Mohammad Amir : Köszönöm szepen 🙏. June 8, 2025 at 9:39 PM, Nguyên : please check for me.there are very few empty MGZ trays there are many machines that are down Thank you June 8, 2025 at 9:39 PM, Nguyên : AN GF NC June 8, 2025 at 9:41 PM, Mohammad Amir : Unfortunately for AN NC there is no empty magazine available. Thank you very much! June 8, 2025 at 9:47 PM, Anita Mirosnicsenko : Line 2 STK AGV#3 stopped, please check! Thank you! June 8, 2025 at 10:09 PM, Anita Mirosnicsenko : Line 2 AGV#2 stopped, please check! Thank you! June 8, 2025 at 10:11 PM, Anita Mirosnicsenko : STK June 8, 2025 at 10:20 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 12 Pre STK > VD • Anode: 72 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 159 GF NC reel Available :- • AN: 195 • CA: 280 Thank you very much! June 8, 2025 at 10:39 PM, Barta Rudi : @Mohammad Amir L3 Ca is receiving the empty magazine (Cathode) very slowly. Please check it. Thank you! June 8, 2025 at 10:39 PM, Mohammad Amir : @Manufacturing Please check we are receiving constant error messages from C1CNV072_M02 cause carrier you are trying to insert has Magazine Polarity mismatch. Id is MLC3032 And Lots are MA1117,MA6465,MA5563,MA3195,MA6179 ,MA4154. Please check this issue. Polarity is different(Cathode plate and Anode Lot). Thank you very much! June 8, 2025 at 10:39 PM, Mohammad Amir : Checking June 8, 2025 at 10:42 PM, Mohammad Amir : Issue has been resolved ✅. Two Cathode magazine one MC1069 on AGV#10 to line 3-2 . And another MC5280 on the way to 3-3 ,waiting for the AGV. I am monitoring. Thank you very much! June 8, 2025 at 10:55 PM, 이도형 (Lee) : @FA VD An #5 AGV is stopped. Please check. June 8, 2025 at 11:06 PM, 이도형 (Lee) : @FA NC An RTV is stopped. Please check. June 8, 2025 at 11:07 PM, Mohammad Amir : For you information It is working fine now ✅ Currently carrying LTA0122. Thank you very much! June 8, 2025 at 11:11 PM, Spilka Sofia : Line 2 AGV 2 stopped,pls check Thank you June 8, 2025 at 11:15 PM, Barta Rudi : @Mohammad Amir Amir(MCS) Hello. The NC Ca 3/2 machine has stopped because it is already full of finished magazines. Please send an AGV to remove the completed magazines. Thank you June 8, 2025 at 11:18 PM, Mohammad Amir : Checking June 8, 2025 at 11:21 PM, Mohammad Amir : Please press UR. Thank you very much! June 8, 2025 at 11:22 PM, Barta Rudi : Sorry 3/3… June 8, 2025 at 11:23 PM, Mohammad Amir : AGV#6 on the way ✅. Thank you very much! June 8, 2025 at 11:27 PM, 동현 : 혹시 GF VD 담당자있으실까요? GF VD 음극 2-4호기 LR 다시 올려주실수 있으실까요? June 8, 2025 at 11:27 PM, Mohammad Amir : @FA @Nagy Tibor Please check C1STKC72_C01/C02 these cranes are inactive without errors and because of this there is shortages of CA Stacking materials. Please make cranes active on priority, production is getting affected. Thank you very much! June 8, 2025 at 11:28 PM, Anita Mirosnicsenko : Line 2 STK AGV 2 stopped please check June 8, 2025 at 11:31 PM, Anita Mirosnicsenko : Please, someone check AGV2. Throughout the day, it has frequently stopped due to an error at the same position. June 8, 2025 at 11:33 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 10 Pre STK > VD • Anode: 90 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 134 GF NC reel Available :- • AN: 210 • CA: 257 Thank you very much! June 8, 2025 at 11:33 PM, 동현 : Does there anyone check possibly if GF VD 2-4 is on drying process or not? June 8, 2025 at 11:47 PM, Barta Rudi : The AGV still hasn’t unloaded June 8, 2025 at 11:48 PM, Mohammad Amir : Checking June 8, 2025 at 11:56 PM, Barta Rudi : The same issue occurred on 4/3 CA as well. June 8, 2025 at 11:57 PM, Mohammad Amir : AGV#6 has unassigned at 23:06 and afterwards no AGVs has assigned. @ACS please check why no AGV has assigned to 3-3 NC CA UR port. Thank you very much! June 8, 2025 at 11:58 PM, Mohammad Amir : UR was received successfully ✅. Currently All AGVs are busy. Thank you! June 9, 2025 at 12:02 AM June 9, 2025 at 12:02 AM, Mohammad Amir : For P01 ,3-3 NC CA, Issue has been resolved ✅. AGV#8 on the way. Thank you very much! June 9, 2025 at 12:10 AM, P.Bence A SSL : @Mohammad Amir There are many machines waiting to be unloaded on the CA/AN side. please check .. June 9, 2025 at 12:13 AM, Mohammad Amir : Please confirm Area ? Is it Stacking? Thank you very much! June 9, 2025 at 12:13 AM, P.Bence A SSL : NC June 9, 2025 at 12:15 AM, P.Bence A SSL : L6 stacking Agv 7 stop please check thank you June 9, 2025 at 12:15 AM, Mohammad Amir : For NC CA and AN, There is no issue at the moment,All AGVs are busy performing LR and UR jobs that's why you are witnessing delay. If you need to unload some machines urgently please let me know. I am monitoring. Thank you very much! June 9, 2025 at 12:18 AM, Mohammad Amir : @FA @Nagy Tibor Please check Robot CA #3(8024) there is Plate detect sensor error and it is blocking empty magazine delivery. Thank you very much! June 9, 2025 at 12:43 AM, Mohammad Amir : @Fa @Amgaa FA Please check C1CNV072_16079/81 these ports are in Manual that's why OOS and hence blocking stacking materials delivery. Thank you very much! June 9, 2025 at 12:48 AM, Vékony Ferenc : Kész van! June 9, 2025 at 12:48 AM, Mohammad Amir : Please check issue still exists. Thank you very much! June 9, 2025 at 12:53 AM, P.Bence A SSL : @Mr.Miti (미티) FA áll a conveyor pálya Ca raktárnál tudsz valakit küldeni ? ST-VD raktár June 9, 2025 at 12:54 AM, Mr.Miti (미티) FA : Igen June 9, 2025 at 12:54 AM, P.Bence A SSL : Meg be kell menni egy anode mgz rosszul van a platen rajta abból később probléma lehet valahol . June 9, 2025 at 12:54 AM, Andrea Zentay : Hello @MCS @FA VD AN AVG#6 stopped in front of the 1/9 #09 furnace. Please check it. June 9, 2025 at 1:00 AM, Andrea Zentay : so now several AVGs have stopped. This is also a problem because there are 3 furnaces here that are already QC:OK and could continue. June 9, 2025 at 1:01 AM, Mohammad Amir : @FA @Nandia FA @Amgaa FA @N.Zoli F.A. Please check this issue because of this other AGVs have stopped. Thank you very much! June 9, 2025 at 1:13 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 17 Pre STK > VD • Anode: 112 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 118 GF NC reel Available :- • AN: 214 • CA: 267 Thank you very much! June 9, 2025 at 1:27 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVC52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 9, 2025 at 1:38 AM, Nagy Tibor : solved June 9, 2025 at 1:38 AM, Mohammad Amir : Köszönöm szepen 🙏 June 9, 2025 at 1:52 AM, Eduard SL Shift A : Line 6 ST3 AGV4 stopped please check June 9, 2025 at 1:52 AM, P.Bence A SSL : @Mohammad Amir please check L1 ST mgz delivery very slowly thank you ! June 9, 2025 at 1:52 AM, Mohammad Amir : Checking June 9, 2025 at 1:56 AM, Mohammad Amir : There Materials on the way . Everything seems fine ,just there is shortages of Anode materials that's why you are witnessing delay in Anode materials delivery. Currently AGV#4 &#3 &#5 on the way to Line-1. I am monitoring. Thank you very much! June 9, 2025 at 2:00 AM, Mohammad Amir : @FA @Amgaa FA @Vékony Ferenc Please check MLC2095 located at C1CNV072_16_158 ,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! June 9, 2025 at 2:01 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+1 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 9, 2025 at 2:07 AM, Mohammad Amir : @FA @Vékony Ferenc Please check LTC0499 located at E0CNVC52_09_052 it is not moving and blocking CA reels delivery. Everything is good from MCS RTD side ✅. Please check physically,is Plate position is correct? Thank you very much! June 9, 2025 at 2:09 AM, Barta Rudi : @Fa NC An 5/1 AGV 3 stop,please check, thank you !!! June 9, 2025 at 2:21 AM, Amgaa FA : Please check MLC4205 located at C1CNV072_16_023 it is not moving and blocking stacking materials delivery. The AGV is not coming to pick it up. June 9, 2025 at 2:21 AM, Mohammad Amir : Sure ,checking. June 9, 2025 at 2:22 AM, Mohammad Amir : Issue has been resolved ✅. AGV#10 has assigned. Thank you very much! June 9, 2025 at 2:33 AM, P.Bence A SSL : @Mohammad Amir L6 magazine delivery very slowly please check June 9, 2025 at 2:34 AM, Mohammad Amir : Checking June 9, 2025 at 2:38 AM, Mohammad Amir : There is no issue found ✅. One CA Stacking materials on the way to line -6 on AGV#5. All CA station are filled with materials just Anode stations are empty because currently we have shortages of Anode materials in the Post VD Warehouse. I am monitoring. Thank you very much! June 9, 2025 at 2:39 AM, Mohammad Amir : @FA @Vékony Ferenc Please check E0STKC51_C01 there is MCP AP error. Thank you very much! June 9, 2025 at 2:45 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVA52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 9, 2025 at 2:45 AM, Mohammad Amir : @Nagy Tibor June 9, 2025 at 3:02 AM, Nagy Tibor : solved June 9, 2025 at 3:03 AM, Mohammad Amir : Köszönom szepen 🙏 June 9, 2025 at 3:04 AM, Mohammad Amir : @FA Please confirm is anyone working on STKC51,issue still exists? Reels delivery has stopped. Thank you very much! June 9, 2025 at 3:10 AM, Mohammad Amir : Please check E0CNVA52_RTV01 there is Runtime Over error again and it has blocked the reels delivery. Thank you! June 9, 2025 at 3:13 AM, 이주봉PM LEE JUBONG(FA) : @이도형 (Lee) VD 음극 6-2 수분검사 완료 인데 UR 부탁 드립니다. June 9, 2025 at 3:19 AM, Nagy Tibor : solved June 9, 2025 at 3:19 AM, Mohammad Amir : Köszönom szepen 🙏 June 9, 2025 at 3:31 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 06 • Cathode: 19 Pre STK > VD • Anode: 111 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 98 GF NC reel Available :- • AN: 253 • CA: 281 Thank you very much! June 9, 2025 at 3:52 AM, Mohammad Amir : @Nagy Tibor @FA Please check E0STKC51_C01 there is Destination operation error #2. Thank you! June 9, 2025 at 4:06 AM, Anita Mirosnicsenko : Line 2 AGV#2 again stopped, please check! Thank you!! June 9, 2025 at 4:07 AM, Anita Mirosnicsenko : Line 1 AGV#9 stopped, please check! Thank you!!! June 9, 2025 at 4:18 AM, Anita Mirosnicsenko : Again AGV#2 please check! Thank you! June 9, 2025 at 4:23 AM, Amgaa FA : solved June 9, 2025 at 4:48 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 9, 2025 at 4:48 AM, Mohammad Amir : Also check and remove from M01 1+2 carriers. Thank you very much! June 9, 2025 at 4:55 AM, Mohammad Amir : @FA @Nagy Tibor Please check E0CNVC52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 9, 2025 at 4:59 AM, Mohammad Amir : @FA @Vékony Ferenc Please check C1STKC72_C01 there is Load Oversize error. Thank you! June 9, 2025 at 5:19 AM, 이도형 (Lee) : @FA NC An #6 AGV ERROR. Please check. June 9, 2025 at 5:35 AM, Vékony Ferenc : Kész van! June 9, 2025 at 5:35 AM, Mohammad Amir : Thank you very much! June 9, 2025 at 5:43 AM, Baek Hojong(백호종)FA : Day Shift 06.09 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 9, 2025 at 6:04 AM, Shakir (MCS) : @FA Please check Anode reel conveyor A52 RTV - lift unload destination port auto off alarm. Thank you June 9, 2025 at 6:13 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 15 Tech, 1 SL Beteg: 0 Szabadságon: 0 Helyettesítés: 0 Túlórás: 2 ———————————— Electrode (4) Marsi Gábor Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(3 Böröcki Balázs Fabricius Gergő Nagy Tamás ———————————— Assembly GF(4) Csuti Zoltán Gégény Dávid Kertész Dani Lajos Gábor ———————————— Formation/Modul(4) Boromisza Zoltán Döme György Harasztia Zoli Sarvajcz Ferenc June 9, 2025 at 6:22 AM, QuangPhan : Hello! Have a nice day! @Shakir (MCS) Could you please check NC AN 3/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. Thank you so much! June 9, 2025 at 6:24 AM, QuangPhan : Same 2/2 June 9, 2025 at 6:24 AM, Shakir (MCS) : Checking June 9, 2025 at 6:30 AM, 김현태 : VD CA AGV #4 error Thanks June 9, 2025 at 6:30 AM, Shakir (MCS) : Currently all AGVs are busy, everything good from MCS side, I have increased the priority, AGV will assign soon. Thank you June 9, 2025 at 6:32 AM, QuangPhan : Thank you June 9, 2025 at 6:34 AM, Shakir (MCS) : Same for 2/2 NC AN, waiting for AGV. UR received successfully. Thank you June 9, 2025 at 6:57 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 05 • Cathode: 30 Pre STK > VD • Anode: 87 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 111 GF NC reel Available :- • AN: 253 • CA: 298 June 9, 2025 at 7:03 AM, Dariimaa/다리마/Ivancsa : @MCS good morning VD CA 4-9 chamber has only 2 carriers. Please check Thank you! June 9, 2025 at 7:04 AM, Shakir (MCS) : Checking June 9, 2025 at 7:08 AM, Shakir (MCS) : We received unload complete report after receiving LR. Please apply LR again for empty ports P02/P01. Thank you June 9, 2025 at 7:10 AM, Dariimaa/다리마/Ivancsa : Done June 9, 2025 at 7:11 AM, Shakir (MCS) : LR received successfully , as soon as material available job will be created. Thank you June 9, 2025 at 7:27 AM, Baek Hojong(백호종)FA : @Shakir (MCS) MLA 0063.6220.0131.1145.1225.0236.4026.3004.6183.6195.0041.8212.3074.0161.0210.6195.1134.6062.6214.0216.1103.4065 Why aren't these materials being automatically returned? June 9, 2025 at 7:27 AM, Shakir (MCS) : Checking sir June 9, 2025 at 7:39 AM, 김정희(Jeong hee FA) : GF_A 순환물류 16159 디버터 벨트 틀어짐및 걸림으로 시너스텍 점검 필요합니다 June 9, 2025 at 7:49 AM, Shakir (MCS) : This message was deleted. June 9, 2025 at 7:50 AM, Shakir (MCS) : Hello sir, These carrier on HOLD status on RTD filter, we will examine and after confirmation from manufacturing we will release the carriers. For all these carrier the Hold statue is True that why it is not returnable. Thank you June 9, 2025 at 8:04 AM, Kertész Dániel : @QuangPhan good morning! Can you please come to the An VD STK72? One magazine fell out from the AGV. June 9, 2025 at 8:07 AM, 김현태 : VD NC AGV #1 error Thanks June 9, 2025 at 8:11 AM, Sazzad Bhai SKon : Hi pm, checking the reason June 9, 2025 at 8:14 AM, Sazzad Bhai SKon : @FA All the magazines are duplicated in plate MLA1200 (MA5421, 3389, 6303, 5538, 6082, 2319) Location: C1STKA71 (0105001) Please rack out to Manaul port, confirm magazines, and restock. June 9, 2025 at 8:17 AM, Shakir (MCS) : @FA Please also check E0STKC51_C02 there is Port Interface Error. Thank you very much! June 9, 2025 at 8:18 AM, Sazzad Bhai SKon : @FA MLA1047 location: C1STKA71 (0200701) MA4392, 3214, 2267, 5425, 1540, 4206 please rack out from manual port June 9, 2025 at 8:22 AM, Shakir (MCS) : @FA Please check E0STKA52_C01 Load oversize error. Thank you June 9, 2025 at 8:23 AM, KIM SEYEON [김세연]_FA : @심재훈 @김대웅 Kim Daewung @정다은 피엠님 금일 VD 음극설비 BCR 점검할수 있게 한국진공 엔지니어 현장 미팅 필요합니다. @최정한.KOVA June 9, 2025 at 8:23 AM, Shakir (MCS) : @FA Please check ECNVA52_M04 there is STP-01 Up error. Thank you! June 9, 2025 at 8:24 AM, Gégény Dávid : I am going. June 9, 2025 at 8:27 AM, Lajos Gábor F.A. : Done June 9, 2025 at 8:42 AM, Lajos Gábor F.A. : Done June 9, 2025 at 8:44 AM, Shakir (MCS) : @FA Please also check C1STKA71_C01 there is light curtain detecr error Thank you June 9, 2025 at 8:45 AM, Lajos Gábor F.A. : Done June 9, 2025 at 8:45 AM, Shakir (MCS) : @FA Please also check C1STKC71_P12 there is Run time over error Thank you June 9, 2025 at 8:45 AM, Lajos Gábor F.A. : Done June 9, 2025 at 8:45 AM, Dima Kusyk : Good morning, everyone! Please share updated information! Thank you! June 9, 2025 at 8:46 AM, Shakir (MCS) : Stiill error June 9, 2025 at 8:46 AM, Shakir (MCS) : Good morning, checking June 9, 2025 at 8:48 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 22 Pre STK > VD • Anode: 90 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 127 GF NC reel Available :- • AN: 234 • CA: 288 June 9, 2025 at 9:02 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 , Run time over error. Thank you June 9, 2025 at 9:03 AM, Gégény Dávid : under repair June 9, 2025 at 9:05 AM, Gégény Dávid : Done June 9, 2025 at 9:17 AM, 심재훈 : @최정한.KOVA 지원 부탁 드립니다 June 9, 2025 at 9:58 AM, 최정한.KOVA : 네 진행중입니다. June 9, 2025 at 10:50 AM, Shakir (MCS) : @FA Please check C1CNV072_P28 data mismatch error. Thank you June 9, 2025 at 10:52 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 05 Pre STK > VD • Anode: 86 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 128 GF NC reel Available :- • AN: 227 • CA: 282 June 9, 2025 at 11:18 AM, Shakir (MCS) : @Dariimaa/다리마/Ivancsa Currently there is NO LR for VD AN 3-9. Could you please press LR Thank you June 9, 2025 at 11:20 AM, Dariimaa/다리마/Ivancsa : Done June 9, 2025 at 11:36 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 , Run time over error. Thank you June 9, 2025 at 11:39 AM, Shakir (MCS) : @FA Please check C1STKC71_P22 Pio busy on timer over error. Several carriers are waiting. Thank you June 9, 2025 at 12:11 PM, Shakir (MCS) : @Dariimaa/다리마/Ivancsa Please Press LR for VD AN 6-3 Thank you June 9, 2025 at 12:14 PM, Shakir (MCS) : Also could you please transfer one plate to post vd stk, There is three plate inside vd, transfer plate MLA0190 at VD 2-5_P03, to Stk and press LR again. Thank you June 9, 2025 at 12:25 PM, Dariimaa/다리마/Ivancsa : @Tuya Ivancsa FA pls check June 9, 2025 at 12:28 PM, T. Gàbornè C SL NC : @FA Please check CA robot #2 date mismatch error Thx. June 9, 2025 at 12:32 PM, T. Gàbornè C SL NC : @MCS Hello Please check the AGV at CA VD. C1STKC71 is rising. AGV does not bring a plate to VD. Thank you very much June 9, 2025 at 12:33 PM, Shakir (MCS) : We’re checking June 9, 2025 at 12:34 PM, 김희래 : @FA Please check C1STKA72_P11,12. MLA6095,6233 are on that ports for 2hours. June 9, 2025 at 12:36 PM, Lajos Gábor F.A. : Done June 9, 2025 at 12:38 PM, Kateryna SSL C : Hello @Shakir (MCS) Could you please share available lot for ST GF? June 9, 2025 at 12:38 PM, Shakir (MCS) : Could you tell me the VD equipment id ? June 9, 2025 at 12:38 PM, Shakir (MCS) : Checking June 9, 2025 at 12:40 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 108 • Cathode: 02 Post STK > Stacking • Anode: 01 • Cathode: 145 GF NC reel Available :- • AN: 223 • CA: 294 June 9, 2025 at 12:40 PM, Kateryna SSL C : Thank you! June 9, 2025 at 12:43 PM, Shakir (MCS) : @FA Please check C1STKA72 Fork1 load position error. Thank you June 9, 2025 at 12:44 PM, Lajos Gábor F.A. : Done June 9, 2025 at 12:46 PM, Shakir (MCS) : @Tuya Ivancsa FA June 9, 2025 at 12:47 PM, T. Gàbornè C SL NC : This empty VD. CA 6_09 6_08 6_06 6_03 5_08 5_09 5_04 4_06 4_05 4_04 4_08 4_01 4_02 4_03 3_07 3_04 3_05 3_06 2_03 2_05 1_08 1_01 1_03 1_04 June 9, 2025 at 12:49 PM, Lajos Gábor F.A. : MCS, please check it. On this ports no materials June 9, 2025 at 12:52 PM, Shakir (MCS) : Need confirmation C1STKA72_P12/P11 this port is emty or full, still Job exists Thank you June 9, 2025 at 12:53 PM, Shakir (MCS) : @Lajos Gábor F.A. June 9, 2025 at 12:54 PM, 동현 : GF VD 6-3호기 LR좀 부탁드리겠습니다. June 9, 2025 at 12:54 PM, Lajos Gábor F.A. : There is nothing. June 9, 2025 at 12:54 PM, T. Gàbornè C SL NC : @FA Please check CA reel Storage #52 Tray ID loss problem. Thx June 9, 2025 at 12:55 PM, Lajos Gábor F.A. : Neither physically nor from the SCS side, only MCS side show material June 9, 2025 at 12:57 PM, Shakir (MCS) : Issue has been resolved now, AGV on the way to unload the carrier. Thank you June 9, 2025 at 1:01 PM, Lajos Gábor F.A. : Thank you! June 9, 2025 at 1:01 PM, Lajos Gábor F.A. : Done June 9, 2025 at 1:05 PM, Pavel : @FA Check, please C1CNV072-CV02-MCP Thank you June 9, 2025 at 1:06 PM, Shakir (MCS) : @FA Please check C1CNV071_12_015 data mismatch error. Thank you June 9, 2025 at 1:11 PM, Dariimaa/다리마/Ivancsa : Solved June 9, 2025 at 1:16 PM, 김현태 : VD CA AGV #4 error Thanks June 9, 2025 at 1:30 PM, QuangPhan : This message was deleted. June 9, 2025 at 1:35 PM, Shakir (MCS) : Press LR for VD CA 6-08 6-03 5-09 4-05 4-01 3-04 Thank you June 9, 2025 at 1:37 PM, Shakir (MCS) : VD CA machine OOS 5-8 3-7 3-1 3-6 1-2 June 9, 2025 at 1:41 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 02 Pre STK > VD • Anode: 94 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 155 GF NC reel Available :- • AN: 144 • CA: 306 June 9, 2025 at 1:42 PM, 인제(Hwang) : NC An AGV#4 Error June 9, 2025 at 1:51 PM, 박시우 : @FA please check VD AN AGV 03 Inplace Error June 9, 2025 at 2:08 PM, 인제(Hwang) : Please check the UR status. The plate is waiting in the chamber for a long time after drying VD An 1-9 2-1, 2-6, 2-8 3-4, 3-5, 3-6, 3-7 4-1, 4-2, 4-3, 4-6, 4-7 5-3, 5-4, 5-5 6-2 June 9, 2025 at 2:09 PM, Shakir (MCS) : Checking June 9, 2025 at 2:18 PM, 박시우 : @FA please check VD AN AGV 10 Cargo Error June 9, 2025 at 2:20 PM, Shakir (MCS) : This message was deleted. June 9, 2025 at 2:20 PM, Shakir (MCS) : 1-9 : UR received and Job initiated 2-1: UR received and Job initiated 2-6 : UR received and Job initiated 2-8 : LR received and Job initiated 3-4 : UR received and Job initiated 3-5 : UR received and Job initiated 3-6: UR received and Job initiated 4-1 to 4-7 : UR received and Job initiated 5-3 unload completed 5-4 , 5-5 and 6-2 UR received and Job initiated Plates are waiting because there no suitable port available or all inbound ports of STKA72 are busy. Thank you June 9, 2025 at 2:23 PM, 인제(Hwang) : Thank you so much! June 9, 2025 at 2:50 PM, 최명운(CHOI MYOUNGWOON) : This message was deleted. June 9, 2025 at 2:52 PM, 최명운(CHOI MYOUNGWOON) : @FA Tech GF AN NC robot #2 has stopped working. Please check June 9, 2025 at 3:16 PM, Shakir (MCS) : @Tuya Ivancsa FA @Dariimaa/다리마/Ivancsa Please press LR for VD AN 3-2 Thank you June 9, 2025 at 3:18 PM, Shakir (MCS) : @FA Please also check C1STKA71_C01 there is Port Interface Error. Thank you June 9, 2025 at 3:22 PM, 조한진(Jin) : Hello. please check next available lot. Tank you. June 9, 2025 at 3:22 PM, Shakir (MCS) : Checking June 9, 2025 at 3:24 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 76 • Cathode: 03 Post STK > Stacking • Anode: 01 • Cathode: 164 GF NC reel Available :- • AN: 215 • CA: 290 June 9, 2025 at 3:24 PM, 안진모 An Jin Mo : Please Check the AGV #3. GF An VD #6-6 Cargo status abnormal June 9, 2025 at 3:31 PM, 김희래 : @Shakir (MCS) Please check why this plate is not available to stacking.(MLA6195) June 9, 2025 at 3:38 PM, Shakir (MCS) : These carrier located at C1STKA72(0105401) and this shelf is OOS, that why plate is not available for stacking. Thank you June 9, 2025 at 3:46 PM, Kertész Dániel : @Shakir (MCS) Hello! Could you check why C0PVA020 is not unloading the MLA4037 to the C0PVA020_P13 port? June 9, 2025 at 3:54 PM, Shakir (MCS) : From MCS side everything is good, check the portZ June 9, 2025 at 3:56 PM, Kertész Dániel : Thank you! June 9, 2025 at 4:20 PM, Kateryna SSL C : @Shakir (MCS) Could you please update? June 9, 2025 at 4:21 PM, 최명운(CHOI MYOUNGWOON) : It's done! June 9, 2025 at 4:23 PM, T. Gàbornè C SL NC : @FA Helló VD CA 1_05, AGV move only 1 plate. Please check. Thanks. June 9, 2025 at 5:41 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.09 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 9, 2025 at 5:55 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13+2 Overtime Overtime (2):Csanálosi Gábor, Bonnyai Ákos Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(4) Szabadi Miklós, Kiss Balázs, Bonnyai Ákos, Csanálosi Gábor Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 9, 2025 at 5:59 PM, 박시우 : @MCS Please check the next available lot June 9, 2025 at 6:00 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 45 • Cathode: 00 Post STK > Stacking • Anode: 39 • Cathode: 177 GF NC reel Available :- • AN: 221 • CA: 294 June 9, 2025 at 6:22 PM, KIM SEYEON [김세연]_FA : 06.09 Night shift 1F - Ankhaa ( ST 1) GF - Natsag, Zulaa/ Amgaa (ST 2 / NC 1) June 9, 2025 at 6:48 PM, Amgaa FA : @MCS hello Please check MLC3056 located at C1CNV072_16_028 it is not moving and blocking stacking materials delivery. The AGV is not coming to pick it up. Thanks June 9, 2025 at 6:52 PM, 카스텔 발라지 F.A. : All ST port are full of material. June 9, 2025 at 6:56 PM, VK (mcs) : Transport job terminated and carrier location was NA. Fixed now. Thx June 9, 2025 at 7:09 PM, KIM SEYEON [김세연]_FA : @Shakir (MCS) please share available lot June 9, 2025 at 7:11 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 26 • Cathode: 01 Post STK > Stacking • Anode: 58 • Cathode: 159 GF NC reel Available :- • AN: 221 • CA: 302 June 9, 2025 at 7:12 PM, KIM SEYEON [김세연]_FA : @Shakir (MCS) please make GF VD AN below chamber into reservation block mode. please do it when there is no material inside. 1-4 2-3 2-4 2-5 2-7 4-8 4-9 June 9, 2025 at 7:18 PM, VK (mcs) : Copy June 9, 2025 at 7:50 PM, VK (mcs) : @Manufacturing There is transfer command to the VD anode 5/7 and carriers are waiting for it in STK output ports. Machine is out of service Can you please confirm why machine is OoS? June 9, 2025 at 7:51 PM, Dániel Hufnágel : @Simon Dávid D SL NC June 9, 2025 at 7:53 PM, Simon Dávid D SL NC : I'll check. June 9, 2025 at 7:55 PM, Simon Dávid D SL NC : 5/7 furnace bodies were in operation by 11:09 p.m. June 9, 2025 at 7:58 PM, VK (mcs) : So , should I cancel current jobs for that machine? Because carriers blocked the others way. Or you will change it to in service. June 9, 2025 at 7:59 PM, Simon Dávid D SL NC : delete it, I don't know what will happen to the body, thank you June 9, 2025 at 8:41 PM, Simon Dávid D SL NC : @FA hello NC CA 51-es raktár error megnéznétek ,köszönöm June 9, 2025 at 8:43 PM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 22 (13004) Output H/S off error. June 9, 2025 at 8:45 PM, Zsurbej Zsolt F.A. : Kész June 9, 2025 at 8:53 PM, Zsurbej Zsolt F.A. : Done June 9, 2025 at 9:31 PM, Jun(정우준)_SKOH FA : can you Release RTD Hold about MLA01103, 0216, 6214,0041,4194,0131,4026,6220,0161,1145 June 9, 2025 at 9:31 PM, Jun(정우준)_SKOH FA : @VK (mcs) June 9, 2025 at 9:31 PM, VK (mcs) : Checking June 9, 2025 at 9:45 PM, 동현 : I think we need to check the MLAs Vd condition first. So do not release the hold for now. June 9, 2025 at 9:47 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 22 • Cathode: 01 Post STK > Stacking • Anode: 57 • Cathode: 174 GF NC reel Available :- • AN: 238 • CA: 308 June 9, 2025 at 9:48 PM, Simon Dávid D SL NC : @FA hello VD AN raktár megált megnéznétek ,köszönöm June 9, 2025 at 10:02 PM, Simon Dávid D SL NC : @FA hello NC CA #5 AGV error,megnéznétek köszönöm June 9, 2025 at 10:22 PM, Dániel Hufnágel : @VK (mcs) @Jun(정우준)_SKOH FA We passed Chatode 71 storage P_17-18, beacuse we had Fork issue! We will check at the night, please do not start that port! June 9, 2025 at 10:24 PM, Jun(정우준)_SKOH FA : okay. June 9, 2025 at 10:26 PM, VK (mcs) : Did you cancel current jobs for that port? If yes please inform to manufacturing team to apply again LR for cathode VD 4/4 June 9, 2025 at 10:47 PM, 김태헌 : ST 4L #6 AGV fork limit error ST conveyer p01 fork ld/ud req not recieve error please check. June 9, 2025 at 11:23 PM, VK (mcs) : @FA Please check Cathode reel STK C52 -C02 Inactive stope. June 9, 2025 at 11:40 PM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 22 (13004) Output H/S off error. June 9, 2025 at 11:55 PM, Zulaa/졸라/Ivancsa FA : This message was deleted. June 9, 2025 at 11:58 PM, Zulaa/졸라/Ivancsa FA : @MCS GF VD CA 3/2 chamber door close , so please delete the job. June 10, 2025 at 12:00 AM June 10, 2025 at 12:00 AM, VK (mcs) : Jobs cancelled June 10, 2025 at 12:02 AM, 권기홍 : @VK (mcs) check available materials plz June 10, 2025 at 12:03 AM, Zulaa/졸라/Ivancsa FA : Thank you. June 10, 2025 at 12:04 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 16 • Cathode: 20 Pre STK > VD • Anode: 50 • Cathode: 00 Post STK > Stacking • Anode: 25 • Cathode: 141 GF NC reel Available :- • AN: 240 • CA: 318 June 10, 2025 at 12:07 AM, 권기홍 : vd an 1-1 1-3 6-6 looks empty. do you know why they are not requested? June 10, 2025 at 12:09 AM, VK (mcs) : Checking June 10, 2025 at 12:14 AM, VK (mcs) : VD anode 1/1 Is half chamber . Transport job terminated by storage and then transferred to Post-STK. currently there is no LR for empty ports. June 10, 2025 at 12:15 AM, 권기홍 : can you set LR? June 10, 2025 at 12:18 AM, VK (mcs) : VD anode 1/3 also same situation transport job terminated. And now there is no LR. VD anode 6/6 Transport job created by OP action a few minutes ago. June 10, 2025 at 12:18 AM, VK (mcs) : Sure. I will raise the LR June 10, 2025 at 12:19 AM, 권기홍 : ok thank you very much! June 10, 2025 at 12:19 AM, VK (mcs) : Most welcome June 10, 2025 at 12:21 AM, VK (mcs) : Should I raise LR for anode 1/3 as well? June 10, 2025 at 12:23 AM, 권기홍 : yes June 10, 2025 at 12:26 AM, VK (mcs) : LR for both anode 1/1 and 1/3 applied. and carriers have been assigned. Thx June 10, 2025 at 12:26 AM, 권기홍 : good! June 10, 2025 at 2:24 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 31 • Cathode: 43 Pre STK > VD • Anode: 29 • Cathode: 00 Post STK > Stacking • Anode: 28 • Cathode: 132 GF NC reel Available :- • AN: 243 • CA: 336 June 10, 2025 at 2:29 AM, Jun(정우준)_SKOH FA : @VK (mcs) do you know why didn't generate LR at C6VDA060? June 10, 2025 at 2:30 AM, VK (mcs) : Checking June 10, 2025 at 2:31 AM, Jun(정우준)_SKOH FA : now, it is okay June 10, 2025 at 2:33 AM, VK (mcs) : Materials transferred to machine but for some reason, sent it back to Post-STK and after that there was no LR. But now RTD received LR again and carriers assigned. Thx June 10, 2025 at 2:36 AM, Simon Dávid D SL NC : @FA hello VD-NC raktàr error megnéznétek,köszönöm June 10, 2025 at 3:03 AM, 양원석 : @FA Please check VD anode VC09 June 10, 2025 at 3:04 AM, 원재 : @FA Please check NC AN 7 June 10, 2025 at 3:18 AM, KIM SEYEON [김세연]_FA : @VK (mcs) please share available lot June 10, 2025 at 3:29 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 58 Pre STK > VD • Anode: 18 • Cathode: 01 Post STK > Stacking • Anode: 25 • Cathode: 120 GF NC reel Available :- • AN: 238 • CA: 336 June 10, 2025 at 3:55 AM, Zulaa/졸라/Ivancsa FA : @VK (mcs) Please check VD AN agv#06. Thank you. June 10, 2025 at 4:01 AM, VK (mcs) : Is it MLA2246? June 10, 2025 at 4:04 AM, Zulaa/졸라/Ivancsa FA : No MLA 6217 June 10, 2025 at 4:08 AM, VK (mcs) : MCS and ACS indicates MLA6217 is located on VD 2/2 port 4. Can you please check it. Because, in ACS , MLA2246 is located on AGV 6 and we have a MLA2246 in SCS which located in Post-STK anode A72. June 10, 2025 at 4:10 AM, 양원석 : @FA Plz manual rack out/in MLA2246(in c1stka72) Someone mistypeed id on acs And check plate bcr id both side June 10, 2025 at 4:14 AM, VK (mcs) : MLA2246 ACS and MCS : C0VGVA01_VC06_ DW SCS: C1STKA72 (0105803) June 10, 2025 at 4:15 AM, Lika : This message was deleted. June 10, 2025 at 4:15 AM, Zulaa/졸라/Ivancsa FA : Bd 2/2 port 4 chamber empty. June 10, 2025 at 4:17 AM, VK (mcs) : I am not sure which one have a correct information ACS MCS or SCS. It’s better to check both carrier ID and then transferred. June 10, 2025 at 4:20 AM, VK (mcs) : @FA @Manufacturing Please rack out/in MLA2246 from C1STKA72(0105803) check carrier ID in both side. June 10, 2025 at 4:26 AM, 양원석 : Plz check anode vc05 June 10, 2025 at 4:28 AM, N.Zoli F.A. : Which area? June 10, 2025 at 4:35 AM, 양원석 : Vd June 10, 2025 at 4:46 AM, Simon Dávid D SL NC : @FA hello NC Ca 5/2 az AGV a teli mgz-t az üres helyére tette,megnéznétek köszönöm June 10, 2025 at 4:50 AM, VK (mcs) : Is it MC4336? June 10, 2025 at 4:59 AM, VK (mcs) : @FA Please check Cathode Pre-STK C71 port 18 (9005) Load complete On. Error. June 10, 2025 at 5:53 AM, KIM SEYEON [김세연]_FA : @VK (mcs) ) please share available lot June 10, 2025 at 5:55 AM, Baek Hojong(백호종)FA : Day Shift 06.10 06:00-18:00 백호종 Baek Hojong 전극 조성준(Cho Sung Jun) GF 최명운(CHOI Myoungwoon) 1F 김정희(Kim jeong hul) June 10, 2025 at 5:56 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 55 • Cathode: 66 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 39 • Cathode: 110 GF NC reel Available :- • AN: 225 • CA: 341 June 10, 2025 at 6:06 AM, Dariimaa/다리마/Ivancsa : @MCS good morning Please delete the VD CA 6-6 chamber job. The chamber is empty. June 10, 2025 at 6:07 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Pálosi Róbert Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Nagy Tamás Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Kertész Dani Lajos Gábor Skwarek Tibor ———————————— Formation/Modul(2) Döme György Harasztia Zoli June 10, 2025 at 6:09 AM, duzzaman Md (MCS) : Done, thank you June 10, 2025 at 6:16 AM, 김현태 : VD CA AGV #7 error Thanks. June 10, 2025 at 6:19 AM, Dariimaa/다리마/Ivancsa : This message was deleted. June 10, 2025 at 6:19 AM, Dariimaa/다리마/Ivancsa : @Selem /Ivancsa FA June 10, 2025 at 6:37 AM, duzzaman Md (MCS) : This message was deleted. June 10, 2025 at 6:51 AM, 김현태 : This message was deleted. June 10, 2025 at 6:52 AM, 김현태 : @MCS VD CA 1-8 #8 UR Check thanks you June 10, 2025 at 6:54 AM, duzzaman Md (MCS) : UR received but it shows 'Carrier ID is null' June 10, 2025 at 6:56 AM, duzzaman Md (MCS) : It was not successful June 10, 2025 at 6:58 AM, 김현태 : There is a magazine in the chamber. But Chamber recognize it as an empty magazine. June 10, 2025 at 7:00 AM, duzzaman Md (MCS) : Please send those to Post VD STK. Thank you June 10, 2025 at 7:00 AM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) Please delete the VD CA 6-6 chamber job. The chamber is empty. June 10, 2025 at 7:02 AM, duzzaman Md (MCS) : Checking. Please send CA VD 1/8 to Post VD STK. Carrier id is null. Ur was not successful June 10, 2025 at 7:03 AM, duzzaman Md (MCS) : Done June 10, 2025 at 7:03 AM, Dariimaa/다리마/Ivancsa : Sorry, our software cannot transfer this. June 10, 2025 at 7:04 AM, duzzaman Md (MCS) : @FA Please check June 10, 2025 at 7:04 AM, Dariimaa/다리마/Ivancsa : There is still work to be done. Please check again. June 10, 2025 at 7:04 AM, Dariimaa/다리마/Ivancsa : This message was deleted. June 10, 2025 at 7:06 AM, duzzaman Md (MCS) : No active job for 6_6 VD CA in MCS June 10, 2025 at 7:11 AM, duzzaman Md (MCS) : To add more, there is active LR for VD CA 6_6 since 06:45 However, no materials available. June 10, 2025 at 7:15 AM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) 음극 전창고에 UNK 12개 중 10개가 71_P03에서 발생했는데 확인 부탁드립니다. 그리고 음극 전창고에 공매거진 많은데 설비 매거진부족해서 비가동 발생합니다. 이것도 확인 부탁드립니다 June 10, 2025 at 7:20 AM, Selem /Ivancsa FA : This message was deleted. June 10, 2025 at 7:20 AM, Selem /Ivancsa FA : @duzzaman Md (MCS) Please delete the VD CA 6-6 chamber job. The chamber is empty. June 10, 2025 at 7:27 AM, 최명운(CHOI MYOUNGWOON) : NC AN 로봇 컨베이어쪽으로 와주실수 있나요? June 10, 2025 at 7:28 AM, duzzaman Md (MCS) : There's is no active job, Sir! June 10, 2025 at 7:50 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKC71_C02 Load oversize error June 10, 2025 at 8:06 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 64 • Cathode: 78 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 35 • Cathode: 80 GF NC reel Available :- • AN: 227 • CA: 342 June 10, 2025 at 8:31 AM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) C1STKC71_P19 P20 has not moved for a long time. Please check. Thank you! June 10, 2025 at 8:34 AM, Sazzad Bhai SKon : 19 material is waiting for 20. When P20 receive material they'll be transferred by a batch job June 10, 2025 at 9:02 AM, 인제(Hwang) : Please check the LR status VD An 1-4(#04) VD An 2-2(#11) VD An 2-3(#12) VD An 2-5(#14) VD An 2-7(#16) June 10, 2025 at 9:06 AM, duzzaman Md (MCS) : 1/4___ out of service , have LR, no materials 2/2___have LR 2/3____out of service,Have LR, no materials 2/5____ out of service, have LR, no materials 2/7____out of service, have LR, no materials June 10, 2025 at 9:07 AM, 인제(Hwang) : Thank you so much! June 10, 2025 at 9:12 AM, Koncz Tamás : Honywell ellenőrzést végez a CA Reel raktáraban, kb 35 perc leállást vesz igénybe, raktáranként! June 10, 2025 at 9:12 AM, Koncz Tamás : Honeywell is conducting an inspection at the CA Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 9:12 AM, duzzaman Md (MCS) : @FA Kindly check C1STKC71 P15/P16 Light curtain error June 10, 2025 at 9:13 AM, Dariimaa/다리마/Ivancsa : Solved June 10, 2025 at 9:13 AM, 인제(Hwang) : NC Ca Robot#2 Error June 10, 2025 at 9:14 AM, Sazzad Bhai SKon : @FA There are 12 plates in hold state. Please help us to release the hold state. All of them are in post VD STK. June 10, 2025 at 9:21 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKC71_P19 (DEST) 9021 Port: Output H/S off June 10, 2025 at 9:24 AM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please FA technicians check this. June 10, 2025 at 9:24 AM, Farkas Tamàs : Ok June 10, 2025 at 9:26 AM, Kertész Dániel : It's done. June 10, 2025 at 9:29 AM, duzzaman Md (MCS) : 9021 port, 9030 port, 9029 port Output H/S off Kindly check again June 10, 2025 at 9:33 AM, 김현태 : CA VD 1-8 #8 Magazine did not go to STK June 10, 2025 at 9:36 AM, duzzaman Md (MCS) : This message was deleted. June 10, 2025 at 9:37 AM, duzzaman Md (MCS) : Please send it manually to Post vd stk. In the UR reply we got 'carrier id is null ' Which means there were issues from equipment side and the carrier id read didnt happen June 10, 2025 at 9:37 AM, 김현태 : OK Thank YO June 10, 2025 at 9:50 AM, KIM SEYEON [김세연]_FA : @인제(Hwang) 참고하십시오. VD장비에서 (한국진공) 금일 순차적 점검하고 정상화 할겁니다. June 10, 2025 at 9:50 AM, 인제(Hwang) : 감사합니다! June 10, 2025 at 9:54 AM, QuangPhan : Dear @Fa VD AN 6-2 #47 stopped Right/upper_plate not seated Please send mgz warehouse, the technicians repair machine start. Thank you. June 10, 2025 at 9:57 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot June 10, 2025 at 10:00 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 66 • Cathode: 77 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 55 • Cathode: 97 GF NC reel Available :- • AN: 219 • CA: 128 June 10, 2025 at 10:06 AM, JAEYOON KIM / CS : @인제(Hwang) gf vd an 4-7 플레이트 안착불량 났는데 바코드 리딩 도와주실 수 있나요? June 10, 2025 at 10:08 AM, 인제(Hwang) : 금방 가겠습니다 잠시만 기다려주세요 June 10, 2025 at 10:14 AM, Koncz Tamás : Honywell ellenőrzést végez a AN Reel raktáraban, kb 35 perc leállást vesz igénybe, raktáranként! June 10, 2025 at 10:15 AM, Koncz Tamás : Honeywell is conducting an inspection at the AN Reel warehouse, it will take about 35 minutes of downtime, per warehouse! June 10, 2025 at 10:49 AM, Koncz Tamás : Done! June 10, 2025 at 10:56 AM, 김현태 : NC CA AGV #7 error thanks June 10, 2025 at 11:23 AM, 전 운 (Jeon Woon) : 3Line LR has been loaded at five stations, but the AGV does not bring the plate. Please check. @MCS June 10, 2025 at 11:25 AM, Sazzad Bhai SKon : Could you please write the chamber name? Anode or cathode? June 10, 2025 at 11:29 AM, T. Gàbornè C SL NC : @MCS Hello Please check the AGV at CA VD. C1STKC71 is rising. AGV does not bring a plate to VD. Thank you very much June 10, 2025 at 11:29 AM, Sazzad Bhai SKon : If this is stacking: last LR was at 11:05 from 3 line June 10, 2025 at 11:31 AM, Sazzad Bhai SKon : There are several jobs. But the outbound ports are blocked by plates, whose destination chambers are oos. June 10, 2025 at 11:31 AM, 전 운 (Jeon Woon) : But AGV Don't bring it June 10, 2025 at 11:32 AM, Sazzad Bhai SKon : There is no LR. So please raise LR first June 10, 2025 at 11:33 AM, Sazzad Bhai SKon : So, make the chambers in service. Or delete their current jobs and send back to post VD STK. June 10, 2025 at 11:39 AM, T. Gàbornè C SL NC : @FA Please check CA Robot #3 Data mismatch error Thx June 10, 2025 at 11:43 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 56 • Cathode: 66 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 66 • Cathode: 106 GF NC reel Available :- • AN: 187 • CA: 355 June 10, 2025 at 11:45 AM, Zaya/ivancsa FA : @mcs Pls delete jobs ST AN side AGV1 , AGV9 Port has a material June 10, 2025 at 11:48 AM, duzzaman Md (MCS) : Deleted. Thank you June 10, 2025 at 11:49 AM, Lajos Gábor F.A. : Done June 10, 2025 at 11:58 AM, Dariimaa/다리마/Ivancsa : @MCS VD CA chamber 1-1 2-7 6-7 6-6 only has 2 carriers. Please check Thank you! June 10, 2025 at 12:02 PM, duzzaman Md (MCS) : 1/1___has active job 2/7___has active job 6/7___has active job 6/6___ has LR, no material avail June 10, 2025 at 12:02 PM, duzzaman Md (MCS) : Available* June 10, 2025 at 12:13 PM, 김희래 : @FA Please check C0PVA010_P13. Empty plate is waiting but robot does not work. June 10, 2025 at 1:26 PM, Koncz Tamás : Kedves Mindenki! AN Reel raktár ajtó kivágását elkezdte a kivitelező cég, jelenleg fóliázzák a NC és VD közötti üveges ajtó belsejét, ajtót nem kell lezárnunk így a termelést nem hátráltatjuk June 10, 2025 at 1:26 PM, Koncz Tamás : Dear Everyone! The construction company has started cutting out the door of the AN Reel warehouse, they are currently foiling the inside of the glass door between NC and VD, we don't have to close the door so we don't hinder production June 10, 2025 at 1:53 PM, 최명운(CHOI MYOUNGWOON) : GF An NC 3-1, 3-2 AGV#10 공매거진 설비에 투입하지 못하는 현상 관련 시너스텍에서 점검 중이니 참고바랍니다 @김현태 @인제(Hwang) @Baek Hojong(백호종)FA June 10, 2025 at 1:55 PM, Kertész Dániel : @Sazzad Bhai SKon Hello, please could you check why the Agv's are not transferring the magazines from the C1STKC71 ports to the VD machines? June 10, 2025 at 1:56 PM, duzzaman Md (MCS) : Stk ports are out of service June 10, 2025 at 2:16 PM, JAEYOON KIM / CS invited KANG HEEDOO[강희두]/CS. June 10, 2025 at 2:37 PM, duzzaman Md (MCS) : @FA please check c1stkc71_p15/16/22 Light curtain error Thanks June 10, 2025 at 2:41 PM, 최명운(CHOI MYOUNGWOON) : 조치완료 되었습니다 June 10, 2025 at 2:51 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 55 • Cathode: 56 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 83 • Cathode: 101 GF NC reel Available :- • AN: 229 • CA: 321 June 10, 2025 at 2:52 PM, Skwarek Tibor : Done June 10, 2025 at 3:12 PM, 최명운(CHOI MYOUNGWOON) : Please note that GF AN NC AGV#10 is currently under maintenance by a technician. June 10, 2025 at 3:55 PM, 안진모 An Jin Mo : Good evening, Has the GF An VD #2-3 ULD request been processed? June 10, 2025 at 3:57 PM, duzzaman Md (MCS) : Yeah, it was successful at 15:52 June 10, 2025 at 3:57 PM, 안진모 An Jin Mo : Thank you so much! June 10, 2025 at 4:27 PM, duzzaman Md (MCS) : @FA please check c1stkc71_p15/16 Light curtain error Thanks June 10, 2025 at 4:31 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 48 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 87 • Cathode: 105 GF NC reel Available :- • AN: 239 • CA: 314 June 10, 2025 at 4:47 PM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. UNKDUP-MLC3078A (C1STKC72, 0200101) UNKDUP-MLC3078B (C1STKC72, 0200206) UNKDUP-MLC2171 (C1STKC72, 0105502) DUP250609... (C1STKC72, 0200204) June 10, 2025 at 5:26 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 43 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 97 • Cathode: 102 GF NC reel Available :- • AN: 246 • CA: 307 June 10, 2025 at 5:30 PM, Dariimaa/다리마/Ivancsa : Solved June 10, 2025 at 5:56 PM, Mohammad Amir : @FA Please check C1STKC71_C02 there is Load Oversize error. Thank you! June 10, 2025 at 5:57 PM, 이민재 : Night shift FA Schedule Date: 2025.06.10 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. Elec 최기수(Choi gisu) 3. Assy 이민재(Lee minjae) June 10, 2025 at 5:59 PM, Mohammad Amir : Good Evening Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 40 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 102 • Cathode: 103 GF NC reel Available :- • AN: 240 • CA: 310 Thank you very much! June 10, 2025 at 6:06 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Oláh András Shift change(0): Elektróda:(2) Szabadi Miklós, Kiss Balázs, Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 10, 2025 at 6:09 PM, Mohammad Amir : @Zsurbej Zsolt F.A. Please check this issue . Thank you very much! June 10, 2025 at 6:13 PM, Novák Károly F. A. : Checking June 10, 2025 at 6:15 PM, Mohammad Amir : @FA @Zsurbej Zsolt F.A. Please check E0STKC51_C02 there is Port interface error. Thank you very much! June 10, 2025 at 6:16 PM, Mohammad Amir : This issue has been resolved ✅. Thank you! June 10, 2025 at 6:21 PM, Novák Károly F. A. : Done June 10, 2025 at 6:23 PM, Mohammad Amir : Köszönöm szepen 🙏. June 10, 2025 at 7:25 PM, P.Bence A SSL : L5 stacking Agv 6 stop please check thank you ! June 10, 2025 at 7:45 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 33 • Cathode: 39 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 60 • Cathode: 71 GF NC reel Available :- • AN: 231 • CA: 291 Thank you very much! June 10, 2025 at 7:48 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_P15/16 there is Light Curtain detected error since 19:29 and because of this two jobs are pending. Thank you very much! June 10, 2025 at 7:52 PM, Mohammad Amir : @Manufacturing Please check MLC3212 at C1CNV072_M02 for this carrier ,magazine MC4082 still in stacking start state that's why you are receiving Error. Please check magazine MC4082. Thank you very much! June 10, 2025 at 8:04 PM, Mohammad Amir : @FA Please check C1CNV072_16_156/155 there is INV-01 Runtime error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 10, 2025 at 8:09 PM, 김희래 : @Manufacturing Is there any VD chamber where the process has been completed? There is no UR more than 2 hours. June 10, 2025 at 8:17 PM, Mohammad Amir : @Manufacturing Because of this issue ,there is buzzer everytime you try to Rackin MLC3212. Please check Magazine MC4082,stacking is still start for it. Thank you very much! June 10, 2025 at 8:40 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 10, 2025 at 8:40 PM, Mohammad Amir : Sure Sir Checking! June 10, 2025 at 8:41 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 24 • Cathode: 44 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 39 • Cathode: 81 GF NC reel Available :- • AN: 223 • CA: 288 Thank you very much! June 10, 2025 at 8:45 PM, P.Bence A SSL : L2 stacking Agv 5 stop before ST VD warehouse please check thank you . June 10, 2025 at 8:45 PM, P.Bence A SSL : Anode VD-ST 72 stop runtime over error June 10, 2025 at 8:54 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16_156/155 there is INV-01 Runtime error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 10, 2025 at 8:58 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please also check E0STKC51_C01 there is Load Oversize error. Thank you very much! June 10, 2025 at 9:00 PM, 이민재 : May I know which stack unit it is in? June 10, 2025 at 9:00 PM, Mohammad Amir : Sure Sir, Checking June 10, 2025 at 9:03 PM, Mohammad Amir : Sir, The last location of MLC3212 was at C1CNV072_M02 ,and afterwards it was manually removed from that port at 20:19. Please let me know if you need more information. Thank you very much! June 10, 2025 at 9:06 PM, 박시우 : @FA Please check VD AN AGV 3 fast Error is more than 30min June 10, 2025 at 9:07 PM, KIM SEYEON [김세연]_FA : @Nandia FA @Zulaa/졸라/Ivancsa FA please check VD AN AGV 3 June 10, 2025 at 9:08 PM, Nandia FA : 헝가리 노동자들이 일하고 있습니다 June 10, 2025 at 9:08 PM, 이민재 : Thank you so much. June 10, 2025 at 9:08 PM, KIM SEYEON [김세연]_FA : @박시우 알람명이 뭔가요? June 10, 2025 at 9:08 PM, Mohammad Amir : You are welcome! June 10, 2025 at 9:10 PM, Nandia FA : fork2 inplace abnormal June 10, 2025 at 9:11 PM, 박시우 : 20:35분경에 최초로 inplace 알람 발생 했습니다 June 10, 2025 at 9:11 PM, Jun(정우준)_SKOH FA : 헝가리 테크니션이 포크 센서 점검중이라고합니다. June 10, 2025 at 9:11 PM, 박시우 : Agv를 경로에서 빼는게 나을 것 같습니다 June 10, 2025 at 9:12 PM, KIM SEYEON [김세연]_FA : @Dániel Hufnágel @카스텔 발라지 F.A. please check if AGVs are waiting for AGV #3 Error solving. June 10, 2025 at 9:15 PM, Jun(정우준)_SKOH FA : Please move GF AN AGV3 to "node 96" and repair it. because all agvs stopped. thank you! June 10, 2025 at 9:18 PM, 김희래 : AN NC AGV#10’s status is manual. 3 agvs stopped. Please check it. June 10, 2025 at 9:34 PM, Zsolt F.A. : @mcs Please delete tray MLC1085 from production. It has a faulty handle. June 10, 2025 at 9:34 PM, Mohammad Amir : Checking June 10, 2025 at 9:35 PM, Zsolt F.A. : We already took it out June 10, 2025 at 9:36 PM, Mohammad Amir : Information has been updated successfully ✅. Thank you very much! June 10, 2025 at 9:38 PM, Mohammad Amir : @FA @Zsolt F.A. Please check E0CNVA52 _RTV01 there is TR01 Position Alaram ,and it is blocking reels delivery. Please check the issue on priority. Thank you very much! June 10, 2025 at 9:45 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 22 • Cathode: 30 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 28 • Cathode: 96 GF NC reel Available :- • AN: 222 • CA: 272 Thank you very much! June 10, 2025 at 9:59 PM, Novák Károly F. A. : Solved June 10, 2025 at 10:00 PM, Mohammad Amir : Nagyon Köszönöm szepen 🙏. June 10, 2025 at 10:02 PM, Mohammad Amir : @Novák Károly F. A. Please check C1STKC71_P12 there is INV-01 Run Time over error and it is slowing down empty magazine delivery to NC CA. Thank you very much! June 10, 2025 at 10:03 PM, Dániel Hufnágel : @Mohammad Amir We take out AGV#6 from GF Ca Stacking for maintenance! June 10, 2025 at 10:03 PM, Mohammad Amir : This message was deleted. June 10, 2025 at 10:04 PM, Mohammad Amir : Nagyon szépen köszönöm a tájékoztatást.🙏 June 10, 2025 at 10:18 PM, Zsolt F.A. : Done June 10, 2025 at 10:18 PM, Mohammad Amir : Köszönöm szepen 🙏 June 10, 2025 at 10:32 PM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa I need confirmation, Please inform si there any pallet physically exists at C6VDC020_P02? Thank you very much! June 10, 2025 at 10:53 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 10, 2025 at 10:53 PM, Mohammad Amir : This message was deleted. June 10, 2025 at 10:54 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+4 carriers from it. Because of mentioned issue from M01/04 stacking materials delivery speed has decreased. Thank you very much! June 10, 2025 at 11:05 PM, Zulaa/졸라/Ivancsa FA : @MCS GF ST AN C1STM080_P01 is full, so please delete the AGV#08 job. Thank you. June 10, 2025 at 11:05 PM, Mohammad Amir : Sure Checking June 10, 2025 at 11:08 PM, Mohammad Amir : Job has been cancelled successfully ✅. I have sent the carrier located on the AGV#8 back to warehouse. Thank you very much! June 10, 2025 at 11:13 PM, Mohammad Amir : For you information:- We have received LR again from the Port and job has been created again. Would you like me to cancel this job as well or you need materials this time? Thank you very much! June 10, 2025 at 11:14 PM, P.Bence A SSL : Check again please thank you. June 10, 2025 at 11:15 PM, Mohammad Amir : Sure Checking! June 10, 2025 at 11:16 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 19 • Cathode: 35 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 37 • Cathode: 83 GF NC reel Available :- • AN: 214 • CA: 263 Thank you very much! June 10, 2025 at 11:16 PM, 카스텔 발라지 F.A. : Cancel pls. Those magazines are full or material June 10, 2025 at 11:17 PM, 카스텔 발라지 F.A. : Of* June 10, 2025 at 11:18 PM, Mohammad Amir : Please confirm are you referring to C1STM080_P01? Thank you! June 10, 2025 at 11:19 PM, 카스텔 발라지 F.A. : Yes June 10, 2025 at 11:19 PM, Mohammad Amir : Thank you very much for the confirmation. June 10, 2025 at 11:20 PM, Mohammad Amir : Could you please confirm which carrier actually exists on 1-8 P01 Stacking machine. Is it MLA6231? Thank you very much! June 10, 2025 at 11:20 PM, Mohammad Amir : Job has been cancelled successfully ✅. I have sent the carrier located on the AGV#8 back to warehouse. Thank you very much! June 10, 2025 at 11:24 PM, Mohammad Amir : This message was deleted. June 10, 2025 at 11:24 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA @카스텔 발라지 F.A. Please provide this confirmation,I need this information to fix the issue. Job has created again. Thank you very much! June 10, 2025 at 11:27 PM, 카스텔 발라지 F.A. : Yes, we already working on it. According the ACS the port is full (MLA6231) , but in MCS i didn't see carrier ID at that port. June 10, 2025 at 11:28 PM, Mohammad Amir : I have resolved the issue. ✅ Thank you very much! June 10, 2025 at 11:29 PM, Jun(정우준)_SKOH FA : @manufacturing please check this again. thanks. June 10, 2025 at 11:30 PM, 김희래 : @심재훈 PM님, VD 공정 끝난 후에 작업자들 UR 빠르게 누를 수 있도록 다시 한 번 전파 부탁드리겠습니다. 모니터링시 VD UR이 많이 없고 후창고 재공이 감소 추세가 되었습니다. 참고 부탁드리겠습니다! June 10, 2025 at 11:30 PM, Mohammad Amir : This message was deleted. June 10, 2025 at 11:30 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA @카스텔 발라지 F.A. Now issue has been resolved ✅. Jobs will be not be created again for C1STM080_P01 untill it's full. Thank you very much! June 10, 2025 at 11:31 PM, 카스텔 발라지 F.A. : We checked, MLA0144 is on the port. We removed it from the port, deleted it from ACS. Now the port is empty. June 10, 2025 at 11:31 PM, 심재훈 : 넵 June 10, 2025 at 11:32 PM, 심재훈 : 끝나자미자 뜨거워서 바로 샘플 취외는 어렵습니다. 얼마나 빠른 걸 원하시는지 모르겠으나, 30분텀은 생각하셔야 합니다. June 10, 2025 at 11:34 PM, Mohammad Amir : Please confirm , You mean P01_C1STM080 is empty ? Thank you very much! June 10, 2025 at 11:35 PM, 카스텔 발라지 F.A. : Yes now the port is empty. According the ACS MLA6231 but phisicaly MLA0144 June 10, 2025 at 11:36 PM, 김희래 : 넵 30분정도 시간 인지하고 있겠습니다. 1시간 이상 딜레이되지만 않으면 될 것 같습니다. 협조 감사드립니다 June 10, 2025 at 11:36 PM, Zulaa/졸라/Ivancsa FA : @Amir(MCS) Please check. AGV#07 in ST CA idle. Thank you. June 10, 2025 at 11:36 PM, Mohammad Amir : Thank you very much for confirming. Now AGV#1 on the way to 1-8 P01 with materials ✅. June 10, 2025 at 11:36 PM, Mohammad Amir : Checking June 10, 2025 at 11:38 PM, Mohammad Amir : Issue has been resolved ✅. AGV#7 has started to move. Thank you very much! June 10, 2025 at 11:58 PM, Dániel Hufnágel : @Mohammad Amir Can you help me please? If AGV#6 at Stacking chatode side get any order can you please delete it? Thank you! June 10, 2025 at 11:58 PM, Mohammad Amir : Sure,checking. June 10, 2025 at 11:58 PM, Dániel Hufnágel : Thank you June 10, 2025 at 11:59 PM, Mohammad Amir : Currently there is no order. ✅ I am monitoring. Thank you! June 11, 2025 at 12:09 AM June 11, 2025 at 12:09 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ans at M04 there are 1+4 carriera please remove it as well. Because of mentioned issue from M01/M04 stacking materials delivery speed has decreased significantly. Thank you very much! June 11, 2025 at 12:33 AM, Mohammad Amir : @카스텔 발라지 F.A. Please check C1STKC71_P15/16 there is Light Curtain detected error since 00:18. Thank you very much! June 11, 2025 at 12:48 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 30 • Cathode: 50 Pre STK > VD • Anode: 05 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode: 87 GF NC reel Available :- • AN: 200 • CA: 245 Thank you very much! June 11, 2025 at 12:57 AM, 김희래 : Can you check how many jobs for VD LR , UR now? June 11, 2025 at 12:58 AM, Mohammad Amir : Sure Sir, Checking. June 11, 2025 at 1:10 AM, Mohammad Amir : Dear Sir, UR Jobs currently:- AN:-80 CA:-00 LR jobs currently:- AN:-00 CA:-00 Thank you very much! June 11, 2025 at 1:17 AM, Elena SL : Hello all please check AGV #9 AN VD June 11, 2025 at 1:26 AM, Mohammad Amir : Dear Sir, Update :- UR Jobs currently:- AN:-64 CA:-08 LR jobs currently:- AN:-12 CA:-04 Thank you very much! June 11, 2025 at 1:29 AM, Elena SL : Please check AGV #5 VD AN June 11, 2025 at 1:37 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKC71_C01 there is Ready off during Forking error. Thank you very much! June 11, 2025 at 1:39 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 45 • Cathode: 49 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 07 • Cathode: 90 GF NC reel Available :- • AN: 200 • CA: 242 Thank you very much! June 11, 2025 at 2:52 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0CNVA52 _RTV01 there is TR01 Position Alaram ,and it is blocking reels delivery. Please check the issue on priority. Thank you very much! June 11, 2025 at 2:56 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 44 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 36 • Cathode: 94 GF NC reel Available :- • AN: 194 • CA: 226 Thank you very much! June 11, 2025 at 3:12 AM, Mohammad Amir : @FA @N.Zoli F.A. Please check E0STKC51_C01 there is Destination operation error #2 . Thank you very much! June 11, 2025 at 3:13 AM, Mohammad Amir : Reels delivery has stopped. Thank you very much! June 11, 2025 at 3:22 AM, Novák Károly F. A. : Done June 11, 2025 at 3:22 AM, Mohammad Amir : Köszönöm szepen 🙏 June 11, 2025 at 3:26 AM, 원재 : @심재훈 GF노칭 양극 짧은릴 확인 공유드립니다. EC1P073F52N5413B / 266 EC1P073F52N5311B / 265 June 11, 2025 at 3:56 AM, 원재 : @FA Please check Nc CA agv #3 June 11, 2025 at 3:58 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 11, 2025 at 3:58 AM, Mohammad Amir : Sure Sir Checking June 11, 2025 at 4:00 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 40 • Cathode: 44 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 38 • Cathode: 96 GF NC reel Available :- • AN: 197 • CA: 233 Thank you very much! June 11, 2025 at 4:05 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16_155 there is INV-01 Runtime error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 11, 2025 at 4:07 AM, Mohammad Amir : @FA @N.Zoli F.A. Please check C1STKA71_C01 there is Travel first movement error. Thank you very much! June 11, 2025 at 4:09 AM, Novák Károly F. A. : Solved June 11, 2025 at 4:09 AM, Mohammad Amir : Köszönöm szepen 🙏 June 11, 2025 at 4:24 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKA52_C02 there is MCP Auto/Manual mode error. Thank you! June 11, 2025 at 4:55 AM, Mohammad Amir : Dear @All, Good morning, GF Next lot quantity available Pre STK > Notching • Anode: 40 • Cathode: 48 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 33 • Cathode: 95 GF NC reel Available :- • AN: 178 • CA: 217 Thank you very much! June 11, 2025 at 5:12 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 11, 2025 at 5:29 AM, 원재 : 정정합니다 📍(양극) 짧은릴 QC Hold현장보관 - EC1P073F52N5413B / 280 QC-OK 생산진행 - EC1P073F52N5311B / 265 QCNok June 11, 2025 at 6:08 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.11. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 11, 2025 at 6:19 AM, duzzaman Md (MCS) : @FA Good morning! Please check E0STKC51_C01 - MCP AP error Thank you June 11, 2025 at 6:42 AM, 김지수PM(Gyuri)_FA : 'AP COMMUNION ERROR' 6:31~ June 11, 2025 at 6:43 AM, Böröcz Tamás : Thanks June 11, 2025 at 6:46 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 51 • Cathode: 49 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 07 • Cathode: 66 GF NC reel Available :- • AN: 159 • CA: 83 Thank you ! June 11, 2025 at 6:49 AM, Böröcz Tamás : If we had Time we are watching exactly the same platform. We are not blind nor dumb. Thanks for understanding June 11, 2025 at 7:07 AM, 이도형 (Lee) : @FA VD An #2 AGV is stopped. Please check. June 11, 2025 at 7:18 AM, 양원석 : @FA plz check VD post stk June 11, 2025 at 7:19 AM, Böröcz Tamás : Omw June 11, 2025 at 7:26 AM, Truong : Hello NC Ca agv #3 error please come check June 11, 2025 at 7:27 AM, 이도형 (Lee) : @Fa VD An #02 1-2 Poor settling Please come check June 11, 2025 at 7:28 AM, 이도형 (Lee) : "Plate not properly seated. Please re-seat it." June 11, 2025 at 7:29 AM, Truong : @Fa June 11, 2025 at 7:30 AM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA @Chinges Fa June 11, 2025 at 7:30 AM, 양원석 : @FA Vd An #3,9 error plz check June 11, 2025 at 7:31 AM, Zaya/ivancsa FA : already solved June 11, 2025 at 7:32 AM, 김지수PM(Gyuri)_FA : @은향(OH EUN HYANG) GF 순환물류 컨베이어 매뉴얼인포트 확인 좀 부탁드려요, 제조 인원분들께 시연을 좀 해주셔야 할 듯 합니다🥲 June 11, 2025 at 7:32 AM, Böröcz Tamás : 6-2 VD CA need tó be unloaded June 11, 2025 at 7:36 AM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. June 11, 2025 at 7:36 AM, 이도형 (Lee) : @FA VD An #7 AGV is stopped. Please check. June 11, 2025 at 7:55 AM, duzzaman Md (MCS) : @FA COULD YOU PLEASE CHECK C1CNV072_P34 PHYSICALLY MLA6069 IS STUCK THERE. THANKS June 11, 2025 at 7:55 AM, duzzaman Md (MCS) : It moved. Thanks ! June 11, 2025 at 7:56 AM, Lan Nhi : @FA Hello. Please check for me. agv #4 is having an error in outline NC. 1/1 thank you. June 11, 2025 at 7:56 AM, Lan Nhi : An June 11, 2025 at 7:59 AM, 양원석 : @FA Vd An #6 error plz check June 11, 2025 at 8:03 AM, Truong : @FA Machine 3/3 CA, mgz quantity is full on uot line but agv has not arrived yet, please check June 11, 2025 at 8:12 AM, Debreczeni Ármin : Agv #8 stucked front of line 3 June 11, 2025 at 8:22 AM, Sazzad Bhai SKon : @FA Please check if LTC1473 is on crane E0STKC51_C01 June 11, 2025 at 8:24 AM, Csanálosi Gábor FA : Nope, not on it June 11, 2025 at 8:27 AM, Truong : @FA NC CA agv#7 error please come check June 11, 2025 at 8:30 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 47 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 03 • Cathode: 57 GF NC reel Available :- • AN: 143 • CA: 165 Thank you ! June 11, 2025 at 8:31 AM, 양원석 : @FA Plz check vd an #9 June 11, 2025 at 8:33 AM, 양원석 : @FA Plz check VD AN #5, 9 June 11, 2025 at 8:38 AM, 양원석 : @FA Plz check VD AN #8,4,2,6.. June 11, 2025 at 8:51 AM, Csanálosi Gábor FA : @duzzaman Md (MCS) and dear @mcs ! There is an issue on gf an VD the agvs tries to unload to a72, but the port is occupied with the previous load. Meanwhile there is empty imput ports are available. I also noticed, the cranes are cant catch up with the apeed or arrival plates. Can you modify the managements of the agvs to unload to the free ports instead of occupied? (For example 2 agv come to same port to unload in 2 minits) June 11, 2025 at 8:57 AM, duzzaman Md (MCS) : The situation is that there are more jobs available than the ports currently employed. For instance, there are 10 active jobs for 4 ports. This scenario is indeed occurring. Meanwhile, the speed of cranes is also optimised to ensure the best performance. June 11, 2025 at 8:58 AM, Csanálosi Gábor FA : Okay, thank you for checking, so you also see this phenomenon June 11, 2025 at 9:00 AM, duzzaman Md (MCS) : And the empty ports you see, they actually have active jobs. And yeah, we see it. There are more jobs . So, this is bound to happen. Also, these are automatically created jobs. June 11, 2025 at 9:03 AM, 양원석 : It's because I made a job through acs due to lack of stacking process materials, I'm distributing it by port as much as possible, but agv may go to the occupied port June 11, 2025 at 9:07 AM, Csanálosi Gábor FA : As i monitoring, seems like the jobs and ports and cranes are with proper numbers, just the rhythm not good. June 11, 2025 at 9:07 AM, duzzaman Md (MCS) : Thank you for the info. Let's keep our eyes open wide for AGV errors. As it will create further delay. June 11, 2025 at 9:13 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. UNKDUP-MLC3168 (C1STKC72, 0105705) UNKDUP-MLC2171 (C1STKC72, 0105502) June 11, 2025 at 9:21 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. UNKDUP-MLA3168 (C1STKC72, 0105705) UNKDUP-MLC2171 (C1STKC72, 0105502) June 11, 2025 at 9:21 AM, 김지수PM(Gyuri)_FA : @김종원 해당 캐리어들 매뉴얼포트로 출고해서 한번 확인해주실 수 있나요? June 11, 2025 at 9:23 AM, Sazzad Bhai SKon : Anode ID in cathode STK June 11, 2025 at 10:03 AM, Debreczeni Ármin : Post vd storage is working now? June 11, 2025 at 10:04 AM, Böröcz Tamás : Melyik? June 11, 2025 at 10:05 AM, Debreczeni Ármin : Line 1 2 3-al szembe benne voltak a Koreai kollegák nagyon June 11, 2025 at 10:07 AM, M.Ferenc "B"Nc/Vd SL : This message was deleted. June 11, 2025 at 10:07 AM, Böröcz Tamás : A raktár megy a CVt állíták meg teljesen feleslegesen hogy a manuális portot állítsák.... Meguntam és bepausáltam aztán elindítottam June 11, 2025 at 10:07 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA E0CNV052_09_007 Lift error. Please check. June 11, 2025 at 10:11 AM, 김희래 : @MCS Hello, sir. Since next time, can you also share VD LR, UR count at that time when you check available lot? I requested it yesterday, and Amir checked it. June 11, 2025 at 10:32 AM, Sazzad Bhai SKon : CA UR: 12 AN UR: 0 CA LR: 6 AN LR 6 June 11, 2025 at 10:44 AM, 김희래 : Thank you sazzad! Please add these to available lot notice even after this. June 11, 2025 at 11:04 AM, 김희래 : @FA Please keep in monitoring GF notching side. Errors should be cleared asap. Thank you June 11, 2025 at 11:04 AM, Csanálosi Gábor FA : We ara on it June 11, 2025 at 11:04 AM, Csanálosi Gábor FA : Are* June 11, 2025 at 11:08 AM, Debreczeni Ármin : @duzzaman Md (MCS) share lot quantity please June 11, 2025 at 11:11 AM, 최정한.KOVA : VD AN 6-2 우측 상부 왼쪽 플레이트감지센서 고장입니다. 교체필요합니다. 챔버내 미건조 매거진 AGV반송 해주세요. June 11, 2025 at 11:15 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 75 • Cathode: 66 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 39 • Cathode: 65 GF NC reel Available :- • AN: 136 • CA: 119 VD CA UR: 14 AN UR: 8 CA LR: 10 AN LR :8 Thank you ! June 11, 2025 at 11:16 AM, Deepu Divan FA-Eng : Please check Notching anode Agv 8 @Csanálosi Gábor FA June 11, 2025 at 11:22 AM, Sazzad Bhai SKon : There are some manual jobs created instead of UR. June 11, 2025 at 11:23 AM, Sazzad Bhai SKon : Anode VD AN. @FA please raise UR instead of making manual jobs June 11, 2025 at 11:37 AM, Debreczeni Ármin : L1 magazine supply is slow. Any problem? June 11, 2025 at 11:45 AM, duzzaman Md (MCS) : @FA PLEASE CHECK LIGHT CURTAIN ERROR AT C1STKA71 P17/18 THANKS June 11, 2025 at 11:55 AM, duzzaman Md (MCS) : There is active job now June 11, 2025 at 11:57 AM, Debreczeni Ármin : Thank you June 11, 2025 at 12:12 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 6-2 The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 11, 2025 at 12:16 PM, 김지수PM(Gyuri)_FA : VC08 and VC03 will transfer it to C72 June 11, 2025 at 12:37 PM, Zaya/ivancsa FA : @duzzaman Md (MCS) , hello, pls delete job VD Ca Chamber4-2 P1,P2. June 11, 2025 at 12:37 PM, Zaya/ivancsa FA : Chamber is empty June 11, 2025 at 12:41 PM, Sazzad Bhai SKon : Where are the plates now? I don't see the jobs completed June 11, 2025 at 12:43 PM, Zaya/ivancsa FA : Chamber 4-2 has 2 plate on P3,P4 , P1,P2 is empty June 11, 2025 at 12:56 PM, Sazzad Bhai SKon : CA UR: 16 AN UR: 8 CA LR: 14 AN LR: 6 June 11, 2025 at 1:01 PM, 김지수PM(Gyuri)_FA : @fa please check VC06 in CA VD June 11, 2025 at 1:10 PM, 김지수PM(Gyuri)_FA : @Zaya/ivancsa FA @Maya/IvancsaFA please make VC04(CA VD) stop cause have to remove the job for P01 and P02 there are no materials in that port June 11, 2025 at 1:19 PM, Böröcz Tamás : @MCS VD CA VC3 has 1 magazin and VC10 has 2 magazines but there are no order in ACS. They all should go to STKC72 June 11, 2025 at 1:20 PM, Böröcz Tamás : Please create an order June 11, 2025 at 1:25 PM, Sazzad Bhai SKon : Are this AGV online? They're not responding to MCS. Please transfer from ACS June 11, 2025 at 1:25 PM, Sazzad Bhai SKon : Now AGV is online, transfer initiated June 11, 2025 at 1:36 PM, 김지수PM(Gyuri)_FA : @fa please check E0STKC51 thanks June 11, 2025 at 1:42 PM, Kovács Ágnes : Solved June 11, 2025 at 1:47 PM, duzzaman Md (MCS) : GF Next Lot Quantity Available 1. Pre-STK > Notching Anode: 77 Cathode: 53 2. Pre-STK > VD Anode: 00 Cathode: 04 3. Post-STK > Stacking Anode: 19 Cathode: 64 --- GF NC Reel Available Anode (AN): 133 Cathode (CA): 194 --- VD Status CA UR: 16 AN UR: 22 CA LR: 08 AN LR: 00 Thank you! June 11, 2025 at 1:57 PM, 이도형 (Lee) : @FA NC An #3 Robot is stopped. Please check June 11, 2025 at 1:57 PM, Csanálosi Gábor FA : Omw June 11, 2025 at 2:08 PM, 이도형 (Lee) : @FA Ca 3-3 / 1-3 풀매거진 UR 확인 부탁드립니다. June 11, 2025 at 2:17 PM, 김지수PM(Gyuri)_FA : @mcs please check the UR for 3-3 1-3 June 11, 2025 at 2:17 PM, Csanálosi Gábor FA : @duzzaman Md (MCS) pls change destination for MLA0006 to 5086 June 11, 2025 at 2:21 PM, Sazzad Bhai SKon : Where is the final destination? We'll manually transfer June 11, 2025 at 2:21 PM, Csanálosi Gábor FA : In the stacker. Thats 5086 June 11, 2025 at 2:22 PM, Sazzad Bhai SKon : Please tell us the STK name. We don't find 5086 on MCS June 11, 2025 at 2:23 PM, Csanálosi Gábor FA : C1STKA71_P07 June 11, 2025 at 2:26 PM, duzzaman Md (MCS) : Its currently on P06 port and its OOS. Could you please make it in service June 11, 2025 at 2:26 PM, Csanálosi Gábor FA : Yes, in a minit June 11, 2025 at 2:28 PM, Csanálosi Gábor FA : Now its online, but jump to error: MCS DATA REPORT incomplete June 11, 2025 at 2:31 PM, Csanálosi Gábor FA : Now its online without error June 11, 2025 at 2:39 PM, duzzaman Md (MCS) : Port is OOS again 😅 June 11, 2025 at 2:39 PM, duzzaman Md (MCS) : Please transfer it manually June 11, 2025 at 2:39 PM, Csanálosi Gábor FA : Yup, im trying June 11, 2025 at 2:51 PM, Csanálosi Gábor FA : Korean collegues take over the problem from me, so now this is on them June 11, 2025 at 3:03 PM, Sazzad Bhai SKon : UR/LR jobs in VD CA UR: 12 AN UR: 2 CA LR: 4 AN LR: 4 June 11, 2025 at 3:25 PM, 박시우 : @Sazzad Bhai SKon I would like to see UR LR Job in VD and Next lot quantity together Please notice that both next time June 11, 2025 at 3:48 PM, 김지수PM(Gyuri)_FA : @fa please check E0STK001 M03(5009) H/S OFF June 11, 2025 at 3:48 PM, Böröcz Tamás : Foil sok? June 11, 2025 at 3:49 PM, Böröcz Tamás : Stk* June 11, 2025 at 3:49 PM, Szücs Géza FT-B : M is manual port, usually manufacturing using this June 11, 2025 at 3:52 PM, 김지수PM(Gyuri)_FA : Yes🥲 June 11, 2025 at 3:54 PM, 정은탁 (Jung EunTak) : @FA NC Ca 1-1 AGV #8 UR Error. Please Check. June 11, 2025 at 3:54 PM, Böröcz Tamás : But it's GF assy chatroom June 11, 2025 at 3:55 PM, Szücs Géza FT-B : yes June 11, 2025 at 3:55 PM, 김지수PM(Gyuri)_FA : Ah I see I see thanks tamas June 11, 2025 at 3:57 PM, Böröcz Tamás : Solved June 11, 2025 at 3:57 PM, Böröcz Tamás : Just for you ❤️ June 11, 2025 at 4:08 PM, Debreczeni Ármin : @duzzaman Md (MCS) can you send me lot quantity? Thank you June 11, 2025 at 4:15 PM, duzzaman Md (MCS) : GF Next Lot Quantity Available 1. Pre-STK > Notching Anode: 67 Cathode: 65 2. Pre-STK > VD Anode: 02 Cathode: 01 3. Post-STK > Stacking Anode: 34 Cathode: 64 --- GF NC Reel Available Anode (AN): 102 Cathode (CA): 84 --- VD Status CA UR: 14 AN UR: 12 CA LR: 04 AN LR: 02 Thank you! June 11, 2025 at 4:28 PM, duzzaman Md (MCS) : @FA Please check C1STKC71_ P17/18 LIGHT CURTAIN ERROR Thank you June 11, 2025 at 4:43 PM, 이도형 (Lee) : @FA NC An 3-2 Out C/V Diverter (R)이상동작 점검 부탁드립니다 June 11, 2025 at 4:44 PM, Csanálosi Gábor FA : Done June 11, 2025 at 5:02 PM, 이도형 (Lee) : @FA AN 5-1 / 5-2 / 5-3 / 2-2 풀매거진 UR 확인 부탁드립니다. June 11, 2025 at 5:03 PM, 이도형 (Lee) : @FA NC An #1 AGV . Please check June 11, 2025 at 5:04 PM, Csanálosi Gábor FA : Done June 11, 2025 at 5:07 PM, Csanálosi Gábor FA : @Zaya/ivancsa FA do you have time to manage agv1 nc an? It tryimg third time ti stand in position on nc 3 maschine June 11, 2025 at 5:13 PM, Zaya/ivancsa FA : solved 😊 June 11, 2025 at 5:13 PM, Csanálosi Gábor FA : Thank you so much. June 11, 2025 at 5:20 PM, 김지수PM(Gyuri)_FA : GF 음극 노칭쪽 올라오는 UR이 너무 많아서 해당 반송잡들이 다 대기 중 상태입니다. June 11, 2025 at 5:30 PM, duzzaman Md (MCS) : GF Next Lot Quantity Available 1. Pre-STK > Notching Anode: 63 Cathode: 77 2. Pre-STK > VD Anode: 03 Cathode: 03 3. Post-STK > Stacking Anode: 22 Cathode: 73 --- GF NC Reel Available Anode (AN): 84 Cathode (CA): 72 --- VD Status CA UR: 02 AN UR: 30 CA LR: 00 AN LR: 04 Thank you! June 11, 2025 at 5:44 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.11 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 11, 2025 at 5:55 PM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#04 in ST CA idle. Thank you. June 11, 2025 at 5:58 PM, VK (mcs) : Transfer command created. June 11, 2025 at 6:04 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4)+1: Magyar Imre Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— June 11, 2025 at 6:24 PM, 지석범PM (이반차FA) : Night Shift FA Technician Schedule Date: 2025.06.11 Time: 18:00-06:00 1. Lee Ju Bong 2. Ji Seok Beom June 11, 2025 at 6:40 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 63 • Cathode: 74 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 26 • Cathode: 52 GF NC reel Available :- • AN: 78 • CA: 67 ////////////////////////////////// VD Unload request .Anode:16 .Cathode:24 Load request .Anode:00 .Cathode:08 June 11, 2025 at 6:45 PM, Barta Rudi : Hello! @VK (mcs) The 3/3, 4/2, and 4/1 cathode machines have stopped because they are already full with finished magazines. Please send the AGV to remove the finished magazines. Thank you! June 11, 2025 at 6:48 PM, VK (mcs) : Job exist for all. They are waiting for AGV. For manual transfer please inform to FA team. June 11, 2025 at 6:54 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 63 • Cathode: 74 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 26 • Cathode: 52 GF NC reel Available :- • AN: 78 • CA: 67 ////////////////////////////////// VD Unload request .Anode:14 .Cathode:16 Load request .Anode:08 .Cathode:06 June 11, 2025 at 8:34 PM, 박시우 : Please notice Next lot quantity available June 11, 2025 at 8:35 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 74 • Cathode: 93 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 15 • Cathode: 44 GF NC reel Available :- • AN: 48 • CA: 50 ////////////////////////////////// VD Unload request .Anode:17 .Cathode:04 Load request .Anode:10 .Cathode:06 June 11, 2025 at 8:41 PM, Barta Rudi : @VK (mcs) @FA C1CNV072_16_159 data mismatch error, please check!! Thank you June 11, 2025 at 8:51 PM, Barta Rudi : !!! June 11, 2025 at 8:52 PM, VK (mcs) : @FA Please check it out. Thx June 11, 2025 at 8:52 PM, Tuya Ivancsa FA : We are working right now June 11, 2025 at 8:58 PM, Barta Rudi : @Fa NC CA 2/2 AGV 6 stop, please check!!!! Thank you June 11, 2025 at 9:06 PM, KIM SEYEON [김세연]_FA : @이민재 VD챔버에서 건조 완료후 샘플 수집하고 바로 UR을 할수 있도록 조립삼구분과 SHIFT리더분께 전달 한번 부탁드립니다. 감사합니다. June 11, 2025 at 9:06 PM, 이민재 : 네 알겠습니다 June 11, 2025 at 9:07 PM, KIM SEYEON [김세연]_FA : VD CA의 UR이 적은것 같습니다. June 11, 2025 at 9:33 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 73 • Cathode: 95 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 28 • Cathode: 40 GF NC reel Available :- • AN: 47 • CA: 44 ////////////////////////////////// VD Unload request .Anode:12 .Cathode:10 Load request .Anode:04 .Cathode:08 June 11, 2025 at 9:40 PM, Anita Mirosnicsenko : Hello! Line 3 AGV #8 stopped! Please check! Thank you! June 11, 2025 at 9:41 PM, Anita Mirosnicsenko : Stacking June 11, 2025 at 9:42 PM, Anita Mirosnicsenko : It has already been resolved! Thank you! June 11, 2025 at 10:14 PM, VK (mcs) : @FA Please check Cathode Pre-STK C71 -C01 It hasn’t error but doesn’t move. June 11, 2025 at 10:18 PM, Barta Rudi : @Fa NC ca agv8 stop, please check, thank you!! June 11, 2025 at 10:26 PM, Barta Rudi : @VK (mcs) The magazines in VD Ca 5-7 #43 machine have been ready since 14:16, but the AGV has not come to pick them up yet. Please send an AGV to collect the magazines and place them in the warehouse. Thank you! June 11, 2025 at 10:29 PM, Barta Rudi : @VK (mcs) @FA In the 5-8 #44 machine, there is also 1 plate inside, which was completed at 13:27 but is still in the machine. June 11, 2025 at 10:31 PM, VK (mcs) : Checking June 11, 2025 at 10:42 PM, VK (mcs) : VD cathode 5/7 Last UR received at 15:33 but reply is: carrier location mismatch (carrier is not exist(MC1448) It seems for port 1 MGZ ID registered instead of Plate ID. June 11, 2025 at 10:46 PM, VK (mcs) : VD cathode 5/8 UR received at14:39 But for port 3 UR reply is carrier ID is null. Please modify it and apply again UR. June 11, 2025 at 10:56 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 83 • Cathode: 95 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 21 • Cathode: 33 GF NC reel Available :- • AN: 45 • CA: 47 ////////////////////////////////// VD Unload request .Anode:12 .Cathode:08 Load request .Anode:08 .Cathode:22 June 11, 2025 at 11:22 PM, Barta Rudi : @VK (mcs) The empty magazines are arriving very slowly on the cathode side, and the AGV is also slow to pick up the finished magazines. In some machines, the finished materials have been waiting for a long time (4/3, 4/2, 4/1, 1/2, 2/3, 2/2, 3/2, 5/3, 5/2). June 11, 2025 at 11:25 PM, VK (mcs) : There is only 10AGVs and all of them have a job.AGVs are working without problem, just number of orders are high. June 11, 2025 at 11:31 PM, Nguyên : Pls request AGV come to chamber #47(6-2) AN for take out plate inside. We need to check chamber error. Thank you June 11, 2025 at 11:44 PM, Barta Rudi : @VK (mcs) Please check Job of the half chamber VD CA 6-4 (#49)LR VD CA 6-6 (#51) LR VD CA 3-4(#22) LR VD CA 4-2 (#29) LR VD CA 1-1 (#01) LR June 11, 2025 at 11:57 PM, VK (mcs) : VD cathode 6/4 there is no LR , please apply again for empty ports. 3 & 4 Reason: received unload complete report after load request. 6/6 please apply again LR for empty ports 1 & 2 Reason: Information was remained in RTD for port 2. 3/4 is full and and VD process started at 23:37 4/2 please apply again LR for empty ports 1 & 2 Reason: RTD doesn’t receive unload complete report and information was remained in system. Please confirm port 1 and 2 is empty. 1/1 Please apply LR for empty ports. June 12, 2025 at 12:10 AM June 12, 2025 at 12:10 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 85 • Cathode: 103 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 22 • Cathode: 30 GF NC reel Available :- • AN: 42 • CA: 55 ////////////////////////////////// VD Unload request .Anode:10 .Cathode:02 Load request .Anode:06 .Cathode:02 June 12, 2025 at 12:24 AM, VK (mcs) : @FA Please check Anode reel conveyor A52 RTV run time over. June 12, 2025 at 12:39 AM, Barta Rudi : @FA Please send an AGV to the 5-7 #43 Ca VD machine and move the magazines inside to the warehouse. Thank you. June 12, 2025 at 12:45 AM, 원재 : I took care of it June 12, 2025 at 1:07 AM, Barta Rudi : @FA Ca VD 4-9 AGV 7 stop, please check, thank you!!! June 12, 2025 at 1:10 AM, Zulaa/졸라/Ivancsa FA : Done June 12, 2025 at 1:23 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 79 • Cathode: 99 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 16 • Cathode: 26 GF NC reel Available :- • AN: 47 • CA: 71 ////////////////////////////////// VD Unload request .Anode:16 .Cathode:06 Load request .Anode:10 .Cathode:06 June 12, 2025 at 2:03 AM, Zulaa/졸라/Ivancsa FA : @mcs HELLO, why are you using only 16136 outport on C1CNV072? Because of this conveyer got stuck. Please explain it. June 12, 2025 at 2:07 AM, VK (mcs) : Anode material transferring to Pre-STK A71 through this port because of short route. June 12, 2025 at 2:07 AM, 이주봉PM LEE JUBONG(FA) : Okay June 12, 2025 at 2:11 AM, Nagy Tibor : @VK (mcs) All empty anodes are directed to port 16136, which causes congestion. Please use the other output ports as well. Thank you June 12, 2025 at 2:13 AM, VK (mcs) : Changing destination needs to rewrite the rule. We will work on it. Thanks for information. June 12, 2025 at 2:16 AM, Nguyên : Pls request AGV come to chamber #47(6-2) AN for take out plate inside. We need to check chamber error. Thank you June 12, 2025 at 2:26 AM, Barta Rudi : @VK (mcs) In the cathode VD 6-4 #49, 6-6 #51, and 1-1 #01 machines, material has only been loaded on one side for a long time. The machine is not loading the other side to start the process. Could you please check? Thank you. June 12, 2025 at 2:28 AM, VK (mcs) : I checked as the previous request. The reason of phenomenon is, RTD received unload complete report after Load request. Please apply again LR for empty ports.thx June 12, 2025 at 2:42 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 22(13004) Output H/S off error. June 12, 2025 at 2:59 AM, 원재 : @FA CA 6-6 , 6-4 Half Please check June 12, 2025 at 3:01 AM, VK (mcs) : LR received for both. Material will be transferred when they are available. June 12, 2025 at 3:21 AM, 원재 : @FA NC An6-2#47 Chamber upper right barcode recognition sensor is short-circuited and requires action. #47 equipment is blocked by AGV 10, so work cannot be done. Please move AGV 10. Please thank you June 12, 2025 at 3:31 AM, Tuya Ivancsa FA : @VK (mcs) June 12, 2025 at 3:31 AM, Barta Rudi : @Fa NC ca 3/2 AGV 8 stop, please check, thank you June 12, 2025 at 3:34 AM, 원재 : @FA There is a full magazine that is not dried in the Ca VD 2-6 chamber, but there is no oven plate and magazine information. Please check. June 12, 2025 at 3:38 AM, VK (mcs) : Notching anode AGV 10 has not blocked the way. How can I help you? June 12, 2025 at 3:39 AM, 원재 : Sorry, it's not Noching, it's VD. The agv transfer has been processed. Thank you. June 12, 2025 at 3:40 AM, VK (mcs) : Thanks for confirmation June 12, 2025 at 3:45 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 88 • Cathode: 119 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 03 • Cathode: 00 GF NC reel Available :- • AN: 41 • CA: 69 ////////////////////////////////// VD Unload request .Anode:07 .Cathode:05 Load request .Anode:06 .Cathode:06 June 12, 2025 at 3:48 AM, 원재 : @FA NC An 5-1, 5-2, 5-3, 2-2, 2-1, full magazines are full for a long time. Please check the agv route. June 12, 2025 at 3:50 AM, VK (mcs) : Jobs assigned for all machines, but currently AGVs are busy June 12, 2025 at 3:51 AM, 원재 : The equipment cannot be operated because the magazine in the port is full. Many equipments are stopped. Can't you process the full magazine first? June 12, 2025 at 3:54 AM, VK (mcs) : I will increase priority June 12, 2025 at 3:55 AM, 원재 : thank you June 12, 2025 at 3:57 AM, 원재 : This message was deleted. June 12, 2025 at 3:58 AM, 원재 : @FA Please check Nc An robot C1CNVA71-CV03-MCP ERROR June 12, 2025 at 4:32 AM, Barta Rudi : NC CA 3/3 AGV 8 stop, please check thank you June 12, 2025 at 5:38 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 88 • Cathode: 123 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 10 • Cathode: 00 GF NC reel Available :- • AN: 42 • CA: 54 ////////////////////////////////// VD Unload request .Anode:13 .Cathode:10 Load request .Anode:10 .Cathode:06 June 12, 2025 at 6:04 AM, 이도형 (Lee) : @FA NC Ca #3 Robot is stopped. Please check. June 12, 2025 at 6:06 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.12. 12+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(+1): 방혁_이반차 (Bang Hyuk) Sick(0): Shift Change(0): --------------- Electrode(3): Pálosi Róbert, Rácz Dániel, Czeilinger Krisztián --------------- Assy GF (3): Csanálosi Gábor, Kovács Ágnes, Böröcz Tamás --------------- Assy 1F (3): Pintye Miklós, Böröczki Balázs, Takács Ádám --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán --------------- Support(1): 김지수(G June 12, 2025 at 6:08 AM, Shakir (MCS) : @FA, Good morning Please check E0CNVC52_RTV01 is OOS. Thank you June 12, 2025 at 6:12 AM, Dariimaa/다리마/Ivancsa : Solved June 12, 2025 at 6:20 AM, Kovács Ágnes : Solved June 12, 2025 at 6:27 AM, Elena Dzhul invited Nadiia Arkhipova. June 12, 2025 at 6:28 AM, Shakir (MCS) : @FA @Dariimaa/다리마/Ivancsa Could you please check E0CNVC52_BP08 port showing OOS and LTC1525 carrier job is in alternating state. Thank you June 12, 2025 at 6:32 AM, 이도형 (Lee) : @FA VD An #1 AGV is stopped. Please check. June 12, 2025 at 6:36 AM, Dariimaa/다리마/Ivancsa : The port is working normally on the CCS application. June 12, 2025 at 6:37 AM, Shakir (MCS) : Thank you, Carrier moved. June 12, 2025 at 7:02 AM, Shakir (MCS) : @FA Please check E0CNVC52_M08, Data loss error. Thank you June 12, 2025 at 7:04 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca #27 (3-9) The chamber has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 12, 2025 at 7:07 AM, 김지수PM(Gyuri)_FA : @please check VC07 CA VD June 12, 2025 at 7:08 AM, 김지수PM(Gyuri)_FA : VC01 VC08 were assigned to carry out request June 12, 2025 at 7:10 AM, M.Ferenc "B"Nc/Vd SL : Thank you! June 12, 2025 at 7:12 AM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity June 12, 2025 at 7:14 AM, Shakir (MCS) : Checking June 12, 2025 at 7:18 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 81 • Cathode: 120 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 11 • Cathode: 00 GF NC reel Available :- • AN: 22 • CA: 18 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:08 .Cathode:09 Load request .Anode:02 .Cathode:04 June 12, 2025 at 7:25 AM, Shakir (MCS) : @FA Please check C1STKA72_P12 there is INV-01 Run Time over error. Thank you June 12, 2025 at 7:30 AM, Csanálosi Gábor FA : Done June 12, 2025 at 7:43 AM, Shakir (MCS) : @FA C1STKA71_P16_OP01 there is Data mismatch error. Thank you June 12, 2025 at 7:45 AM, 김지수PM(Gyuri)_FA : @은향(OH EUN HYANG) 순환물류쪽 봐주심 감사하겠습니다 GF June 12, 2025 at 7:46 AM, M.Ferenc "B"Nc/Vd SL : @MCS NC CA No AGV is arriving to transport the full magazines. Please check what could be the reason. June 12, 2025 at 7:46 AM, M.Ferenc "B"Nc/Vd SL : 4-3 machine June 12, 2025 at 7:46 AM, Shakir (MCS) : @FA Please check C1STKA72_C02 there is Ready off during Forking error. Thank you very much! June 12, 2025 at 7:52 AM, Shakir (MCS) : For NC CA There is no issue at the moment,All AGVs are busy performing LR and UR jobs. I have increased the Priority Thank you. June 12, 2025 at 7:57 AM, Shakir (MCS) : @FA Please check C1STKA71_P16_OP01 there is Data mismatch error. Thank you June 12, 2025 at 7:57 AM, 은향(OH EUN HYANG) : 테크니션. 몽골 작업자 조치중입니다 June 12, 2025 at 8:00 AM, Zaya/ivancsa FA : Solved June 12, 2025 at 8:18 AM, M.Ferenc "B"Nc/Vd SL : @FA NC CA Robot #2 error. Please check. June 12, 2025 at 8:20 AM, M.Ferenc "B"Nc/Vd SL : At the same place, AGV #6 picked up empty magazines incorrectly. June 12, 2025 at 8:23 AM, Lan Nhi : @FA Hello. Please check, for example: An machine 2-3 (#12) was picked up yesterday, but until now AGV still hasn't taken the goods out. June 12, 2025 at 8:30 AM, 김지수PM(Gyuri)_FA : There was no UR for MLA4127 MLA1121 MLA4056 MLA6212 June 12, 2025 at 8:32 AM, Shakir (MCS) : @김지수PM(Gyuri)_FA VD 2-3 AN There is Issue with carrier location, in MCS and RTD, according to RTD on P03 MA3367 and MCS showing MLA4127 that the reason the unload request failed. Thank you June 12, 2025 at 8:36 AM, Lan Nhi : yes. thanks for your information June 12, 2025 at 8:40 AM, Shakir (MCS) : Additionally The plate on P01, MLA4056 having magazine MA3367 showing on P03 port of VD 2-3. Thank you June 12, 2025 at 8:48 AM, Yosyp Tovt : Line 4 ST AGV 8 stopped June 12, 2025 at 8:50 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 2-6, 3-7 The chambers has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 12, 2025 at 8:54 AM, Böröcz Tamás : Sajnos nincs jogunk :'( @김지수PM(Gyuri)_FA June 12, 2025 at 9:04 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 101 • Cathode: 118 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 18 • Cathode: 00 GF NC reel Available :- • AN: 30 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:10 .Cathode:14 Load request .Anode:07 .Cathode:08 June 12, 2025 at 9:06 AM, M.Ferenc "B"Nc/Vd SL : Akkor kit kell ilyen ügyekben címeznem? June 12, 2025 at 9:08 AM, Csanálosi Gábor FA : Azt hiszem @Zaya/ivancsa FA @Dariimaa/다리마/Ivancsa . Nekik van jogosultságuk. Do you have permission to send agvs on vd, right? June 12, 2025 at 9:09 AM, Zaya/ivancsa FA : No sorry June 12, 2025 at 9:10 AM, Shakir (MCS) : Okay I will do that June 12, 2025 at 9:12 AM, Zaya/ivancsa FA : we don’t have permission June 12, 2025 at 9:12 AM, Shakir (MCS) : I am working on it June 12, 2025 at 9:13 AM, Csanálosi Gábor FA : Akkor marad az @mcs Fecó. June 12, 2025 at 9:13 AM, 이도형 (Lee) : @MCS NC AN 2-2 Full Magazine UR Priority check June 12, 2025 at 9:14 AM, Sazzad Bhai SKon : @김지수PM(Gyuri)_FA Hi, could you please transfer the plates manually? Because there was wrong UR from VD June 12, 2025 at 9:16 AM, Shakir (MCS) : Job exists with 50% Priority Thank you June 12, 2025 at 9:18 AM, Shakir (MCS) : Job has been initiated for 2-6 and 3-7 CA VD Soon chamber will be empty. Thank you June 12, 2025 at 9:18 AM, 김지수PM(Gyuri)_FA : VC04 VC08 > 2-6 VC02 VC10 > 3-7 Sry for late June 12, 2025 at 9:23 AM, 김지수PM(Gyuri)_FA : Now VC07 VC02 were assigned for this order. @Dariimaa/다리마/Ivancsa please transfer the plate into the AGV(#7) from the P03 when problem arises, thanks! June 12, 2025 at 9:24 AM, 김지수PM(Gyuri)_FA : . June 12, 2025 at 9:31 AM, Shakir (MCS) : @Zaya/ivancsa FA Could you please press LR for VD CA 5-5, job cancelled by OP action. Half chamber situation. Also VD 4-2 CA, needs confirmation about plates inside VD chamber . Thank you June 12, 2025 at 9:34 AM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA VD CA chamber 3-7 doors are closed. Please delete the job. June 12, 2025 at 9:38 AM, Zaya/ivancsa FA : 5-5 closed, 4-2 (MLC3195) (MLC3119) June 12, 2025 at 9:43 AM, Shakir (MCS) : Could you please Press LR for 4-2 CA VD Thank you June 12, 2025 at 9:46 AM, Shakir (MCS) : LR received successfully Thank you June 12, 2025 at 9:52 AM, Lan Nhi : The machine still cannot call AGV. Please check for me. Thank you. June 12, 2025 at 9:54 AM, Shakir (MCS) : Chamber 2-3 AN empty now, and LR received successfully. June 12, 2025 at 9:56 AM, 이도형 (Lee) : @FA . @MCS NCCa. NCAn The full magazines and empty magazines are not being processed smoothly. Please adjust the priority to ensure smooth operation. June 12, 2025 at 9:56 AM, Shakir (MCS) : Checking June 12, 2025 at 10:01 AM, 김희래 : Please check C0PVA020_P07. Port is empty. June 12, 2025 at 10:02 AM, Lan Nhi : Thank you June 12, 2025 at 10:04 AM, Shakir (MCS) : I have adjusted some full magazines Priority now. It causing delay because of AGVs are busy. Thank you June 12, 2025 at 10:15 AM, 최정한.KOVA : VD CA 3-6 챔버내 건조전 매거진 AGV반송해주세요. PIO 센서 점검했습니다. 반송후 다시 LR올리겠습니다. June 12, 2025 at 10:21 AM, 최정한.KOVA : VD CA 3-7 챔버내 건조전 매거진 AGV반송해주세요. 진공도 도달못함 알람. 점검빌요합니다. June 12, 2025 at 10:27 AM, Csanálosi Gábor FA : GF AN VD AGV #2 Lined out for senzor change/replace June 12, 2025 at 10:29 AM, Shakir (MCS) : @FA Please check C1CNV071_13_037 run time error. Thank you June 12, 2025 at 10:52 AM, Debreczeni Ármin : Send me new please June 12, 2025 at 10:52 AM, Shakir (MCS) : Checking June 12, 2025 at 10:58 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 119 • Cathode: 151 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 35 • Cathode: 28 GF NC reel Available :- • AN: 00 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:16 .Cathode:12 Load request .Anode:08 .Cathode:08 June 12, 2025 at 11:04 AM, KIM SEYEON [김세연]_FA : @Debreczeni Ármin I saw NC reel is empty is it right? June 12, 2025 at 11:05 AM, Böröcz Tamás : I dont think so June 12, 2025 at 11:06 AM, Debreczeni Ármin : Give me a minute June 12, 2025 at 11:07 AM, Böröcz Tamás : There are many full reel and supply is continous June 12, 2025 at 11:07 AM, Shakir (MCS) : There is some issue with RTD side, already working June 12, 2025 at 11:08 AM, Böröcz Tamás : AN CA also June 12, 2025 at 11:09 AM, Shakir (MCS) : We are discussing, working June 12, 2025 at 11:17 AM, Debreczeni Ármin : Also Ca plates are not really reloaded on lines. We stopped al six line for an hour but AGVs didnt give us much more plates. June 12, 2025 at 11:17 AM, Shakir (MCS) : Updated GF Next lot quantity available Pre STK > Notching • Anode: 119 • Cathode: 151 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 35 • Cathode: 28 GF NC reel Available :- • AN: 51 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:16 .Cathode:12 Load request .Anode:08 .Cathode:08 June 12, 2025 at 11:18 AM, Shakir (MCS) : There is some rule change in RTD now we shared the updated lot count. June 12, 2025 at 11:19 AM, Shakir (MCS) : Talking about reel June 12, 2025 at 11:20 AM, Shakir (MCS) : ? June 12, 2025 at 11:26 AM, Shakir (MCS) : Currently there is NO not available for reel CA June 12, 2025 at 12:01 PM, Shakir (MCS) : @FA Please check E0STKC51_C01 - MCP AP error Thank you June 12, 2025 at 12:02 PM, 김지수PM(Gyuri)_FA : Our CS engineer will be there June 12, 2025 at 12:02 PM, Kovács Ágnes : Going June 12, 2025 at 12:05 PM, Kovács Ágnes : Solved June 12, 2025 at 12:17 PM, Debreczeni Ármin : Sorry late answer i mean magazine on st. June 12, 2025 at 1:19 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot June 12, 2025 at 1:21 PM, Shakir (MCS) : Checking sir June 12, 2025 at 1:29 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 97 • Cathode: 121 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 44 • Cathode: 07 GF NC reel Available :- • AN: 64 • CA: 02 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:17 .Cathode:02 Load request .Anode:02 .Cathode:00 June 12, 2025 at 1:53 PM, 김희래 : @mcs Can you check why MC5390,MC3570 are not created to job. They are on C0PVC010 port now. June 12, 2025 at 2:10 PM, Shakir (MCS) : Now MC5390 job initiated to NC 1-2 CA June 12, 2025 at 2:14 PM, Shakir (MCS) : @FA Please check C1STKA71_P14/13, there is Light curtain error. Thank you June 12, 2025 at 2:18 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTv RTV unload start destination unload not busy time over error. June 12, 2025 at 2:19 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV Left unload dest port auto off alarm Thank you June 12, 2025 at 2:35 PM, Lan Nhi : @FA Hello. Please check the machine 1-3 Example/ An error cannot call AGV June 12, 2025 at 2:46 PM, 김희래 : @FA Can you CA NC 5-3 load request again? June 12, 2025 at 2:48 PM, Shakir (MCS) : NC 5-3 CA already have job. June 12, 2025 at 2:53 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 117 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 50 • Cathode: 11 GF NC reel Available :- • AN: 82 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:18 .Cathode:14 Load request .Anode:06 .Cathode:08 June 12, 2025 at 3:00 PM, Shakir (MCS) : @FA Please check C1STKC71_P20/18, there is Light curtain error. Thank you June 12, 2025 at 3:09 PM, Zaya/ivancsa FA : Korean technicians working there June 12, 2025 at 3:18 PM, 이도형 (Lee) : *AGV 원활히 진행이 안되어서 수동으로 풀매거진 전창고 투입 및 공매거진 노칭투입 했습니다 *NC An' 공매거진 공급지연으로 인한 설비 비가동 발생 1-1 09:00~09:48 48분 1-2 05:57~06:17 21분 1-3 11:44~12:00 16분 2-1 13:43~14:08 25분 2-2 07:26~07:26 17분 3-1 08:41~09:12 32분 3-2 09:11~09:44 32분 4-2 11:38~11:58 20분 6-1 09:13~09:37 24분 6-2 11:11~11:30 19분 6-3 11:26~11:41 15분 AGV 원활히 가동 부탁드립니다. June 12, 2025 at 3:25 PM, Shakir (MCS) : @Fa Please check E0CNVC52_RTV01 is OOS. Thank you June 12, 2025 at 3:27 PM, Csanálosi Gábor FA : Checking June 12, 2025 at 3:32 PM, Kovács Ágnes : Solved June 12, 2025 at 3:34 PM, 정은탁 (Jung EunTak) : NC Ca' 공매거진 공급 지연으로 인한 설비정지 1-1 13:22~ 2-1 11:18~14:37 199분 14:42~ 2-2 10:19~11:14 55분 13:26~ 2-3 14:35~ 3-3 13:40~14:32 52분 4-1 13:12~ 4-2 13:04~13:30 26분 15:16~ 4-3 12:47~13:17 30분 5-2 11:25~11:50 25분 5-3 09:50~14:49 299분 6-1 11:37~14:48 191분 6-2 10:07~11:07 60분 11:55~ June 12, 2025 at 3:36 PM, 김희래 : 혹시 현재까지 비가동인 설비에서 LR 한번씩 다시 올려주실 수 있나요?? June 12, 2025 at 3:58 PM, 김지수PM(Gyuri)_FA : 지금 중간에 명령들이 종료가되어서 그런데, 다시 LR좀 눌러주시면 감사하겠습니다. June 12, 2025 at 3:59 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_052 run time over error. Thank you June 12, 2025 at 4:01 PM, Csanálosi Gábor FA : Omw June 12, 2025 at 4:04 PM, Debreczeni Ármin : Refresh please June 12, 2025 at 4:04 PM, Shakir (MCS) : Checking June 12, 2025 at 4:10 PM, Csanálosi Gábor FA : Done June 12, 2025 at 4:14 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 72 • Cathode: 114 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 47 • Cathode: 18 GF NC reel Available :- • AN: 96 • CA: 23 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:16 .Cathode:06 Load request .Anode:00 .Cathode:04 June 12, 2025 at 4:19 PM, M.Ferenc "B"Nc/Vd SL : @MCS NC CA 1-3 machines haven't received empty magazines for a long time. Please check what the problem could be. June 12, 2025 at 4:20 PM, KIM SEYEON [김세연]_FA invited Nauman/Ivancsa FA. June 12, 2025 at 4:20 PM, KIM SEYEON [김세연]_FA : . June 12, 2025 at 4:20 PM, Nauman/Ivancsa FA : Received June 12, 2025 at 4:23 PM, 김희래 : @FA CA NC AGV9 T axis servo step error. Please check June 12, 2025 at 4:29 PM, Shakir (MCS) : Please press the LR, last LR at 15:28 job completed at 15:37 for P04 and For P03 last LR received at 15:53, Job completed at 16:05. Thank you June 12, 2025 at 4:33 PM, 김희래 : @FA C0PVC010 Robot is not working. I cleared alarm but it is not moving. June 12, 2025 at 4:38 PM, Shakir (MCS) : @FA Kindly check C1STKC71 P15/P16 Light curtain error June 12, 2025 at 4:47 PM, Debreczeni Ármin : Line 3 will be stopped because not arriving CA material to this line June 12, 2025 at 4:47 PM, Debreczeni Ármin : Any problem is it? June 12, 2025 at 4:47 PM, Shakir (MCS) : NC? June 12, 2025 at 4:48 PM, Debreczeni Ármin : Post stk ca still 18? June 12, 2025 at 4:48 PM, Debreczeni Ármin : Stacking June 12, 2025 at 4:49 PM, Shakir (MCS) : ST : CA -21 AN-42 June 12, 2025 at 4:49 PM, Debreczeni Ármin : Supply is very slow on this line June 12, 2025 at 4:51 PM, Shakir (MCS) : 3 job exits, AGV01, 02 and 08 on the way for line3. June 12, 2025 at 4:52 PM, Shakir (MCS) : Job exits but currently AGVs are busy. June 12, 2025 at 4:53 PM, Debreczeni Ármin : How we can solve this problem? Can FA operate more AGV? June 12, 2025 at 4:53 PM, Debreczeni Ármin : We have materials now but.. we stopped the line because isnt arrive in time June 12, 2025 at 4:54 PM, Shakir (MCS) : 3 more jobs AGV 04, 10, and 07 assigned for line 3 June 12, 2025 at 4:55 PM, KIM SEYEON [김세연]_FA : @Nauman/Ivancsa FA please remove empty plate at NC AN 8025 June 12, 2025 at 4:57 PM, Shakir (MCS) : We increased the priority for line3, you will receive materials soon. Thank you June 12, 2025 at 4:59 PM, Debreczeni Ármin : Alright thank you. @Diana You will recive magazines in prio. When its possible please restart the line June 12, 2025 at 5:03 PM, Shakir (MCS) : AGV02 and AGV03 on the way to line3 Thank you June 12, 2025 at 5:03 PM, Diana : Continues production?? June 12, 2025 at 5:03 PM, Debreczeni Ármin : If line almost full yes please June 12, 2025 at 5:07 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 101 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 47 • Cathode: 15 GF NC reel Available :- • AN: 94 • CA: 18 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:14 .Cathode:16 Load request .Anode:08 .Cathode:04 June 12, 2025 at 5:20 PM, Shakir (MCS) : Now operation normalize for line3 Thank you June 12, 2025 at 5:24 PM, Debreczeni Ármin : Thank you for your information June 12, 2025 at 5:25 PM, Shakir (MCS) : You’re welcome June 12, 2025 at 5:50 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.12 Time: 18:00~ 06:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 12, 2025 at 6:07 PM, VK (mcs) : @FA Please check Cathode Pre-STK C71 -C02 More than a combination of lifting and lowering sensor error. June 12, 2025 at 6:07 PM, 안종수 : Please check NC AN 4-1 empty magazine LR. The facility is not operating due to supply delay. @FA June 12, 2025 at 6:09 PM, 안종수 : 5-1, 3-2 June 12, 2025 at 6:09 PM, VK (mcs) : AGV 6 on the way to 4/1 port 3 June 12, 2025 at 6:10 PM, VK (mcs) : For both, job assigned and MGZs are waiting for AGVs in Gantry June 12, 2025 at 6:11 PM, 안종수 : Thank you for the confirmation. June 12, 2025 at 6:16 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 7 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(3): Nagy Tibor Bonnyai Ákos Sopronyi Gábor Attila ———————————— Formation/Modul(1): Édl Tamás ———————————— June 12, 2025 at 6:21 PM, Nagy Tibor : solved June 12, 2025 at 6:24 PM, VK (mcs) : @FA Please check Cathode notching AGV # 7 In front of line 4/2. Thx June 12, 2025 at 6:24 PM, 박시우 : @FA Please check NC CA AGV VC07 This vehicle block 4 vehicles June 12, 2025 at 6:48 PM, 안종수 : VD AN STKA71 error. Please check @FA June 12, 2025 at 6:51 PM, 안종수 : VD AN #6 AGV Error. Please check @FA June 12, 2025 at 6:52 PM, Nagy Tibor : ? June 12, 2025 at 6:52 PM, Gua/ IvancsaFa : solved June 12, 2025 at 6:55 PM, 안종수 : Lower Date loss error continues to occur. June 12, 2025 at 7:01 PM, Barta Rudi : @FA NC ca 4/1 AGV 7 stop, please check thank you June 12, 2025 at 7:02 PM, VK (mcs) : @FA Please check Cathode conveyor C1CNV071 (13036) Data mismatch error. June 12, 2025 at 7:05 PM, Barta Rudi : It is blocking the other AGVs. June 12, 2025 at 7:09 PM, Nagy Tibor : solved June 12, 2025 at 7:16 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 71 • Cathode: 103 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 30 • Cathode: 10 GF NC reel Available :- • AN: 86 • CA: 19 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:20 .Cathode:06 Load request .Anode:10 .Cathode:14 June 12, 2025 at 7:17 PM, Anita Mirosnicsenko : Hello! Line 3 STK AGV #8 stopped, please check! June 12, 2025 at 7:20 PM, VK (mcs) : @FA Please check this issue. AGV 7 can not unload material in the port for a while. Destination C4NCC020-P04 Thx June 12, 2025 at 7:36 PM, Spilka Sofia : Line 2 ST14 AGW 2 stopped pls check,Thank June 12, 2025 at 7:48 PM, Anita Mirosnicsenko : Line 3 STK AGV 5 stopped please check! Thank you! June 12, 2025 at 8:24 PM, Barta Rudi : Hello @VK (mcs) @FA For VD Ca 6-4 #49, I would like the magazine to be unloaded by AGV and sent to the warehouse. The machine requires technician adjustment. Thank you. June 12, 2025 at 8:29 PM, VK (mcs) : @FA Please check it out. Thx June 12, 2025 at 8:48 PM, 안종수 : This message was deleted. June 12, 2025 at 8:49 PM, 안종수 : NC AN 2-3, 3-3, 4-1 Empty magazine LR Check Please @FA June 12, 2025 at 8:50 PM, VK (mcs) : 2/3 AGV #6 on the way 3/3 AG. #9 4/1 job assigned and waiting for AGV. June 12, 2025 at 8:55 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 62 • Cathode: 112 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 34 • Cathode: 04 GF NC reel Available :- • AN: 67 • CA: 21 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:02 .Cathode:21 Load request .Anode:12 .Cathode:06 June 12, 2025 at 8:55 PM, Barta Rudi : @FA NC Ca 1/2 AGV 7 stop please check thank you June 12, 2025 at 9:01 PM, Barta Rudi : . June 12, 2025 at 9:12 PM, VK (mcs) : @FA Please check Anode Post-STK A72 -C01 Ready off during forking. June 12, 2025 at 9:13 PM, VK (mcs) : @FA Please check Cathode notching AGV #7 Line 1 /1 Fork 1 double count error. June 12, 2025 at 9:15 PM, 원재 : @FA Ca vd agv#5 check please June 12, 2025 at 9:17 PM, Tuya Ivancsa FA : ST AN CNVR error June 12, 2025 at 9:23 PM, Tuya Ivancsa FA : @VK (mcs) VD CT chamber 3-7 empty pls delete the job AGV5 June 12, 2025 at 9:23 PM, VK (mcs) : Checking June 12, 2025 at 9:25 PM, VK (mcs) : Do you have any information about MLC4146? June 12, 2025 at 9:45 PM, Spilka Sofia : Line 2 ST 15 AGW 10 stopped pls check. Thanks June 12, 2025 at 10:14 PM, 안종수 : Please Rechecking June 12, 2025 at 10:18 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 46 • Cathode: 91 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 38 • Cathode: 00 GF NC reel Available :- • AN: 56 • CA: 01 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:12 .Cathode:15 Load request .Anode:08 .Cathode:16 June 12, 2025 at 10:19 PM, Eduard SL Shift A : line 6 ST slow delivery AN/CA magazine. on the right side of line 1 full plate AN. Ca is missing. please check June 12, 2025 at 10:22 PM, 안종수 : Thank you June 12, 2025 at 10:24 PM, VK (mcs) : There is an issue in conveyor , technicians are working on it. June 12, 2025 at 10:24 PM, Barta Rudi : @VK (mcs) The AGV has not picked up the finished material from the NC CA 4/3 machine for a long time. Please send an AGV to unload it. Thank you. June 12, 2025 at 10:26 PM, VK (mcs) : I increased priority . June 12, 2025 at 10:41 PM, Tuya Ivancsa FA : @VK (mcs) VD CT chamber 3-7 empty pls delete the job AGV3 June 12, 2025 at 10:43 PM, VK (mcs) : Job cancelled June 12, 2025 at 10:46 PM, Barta Rudi : The same problem occurs on NC CA 1/3 and 1/2. June 12, 2025 at 10:48 PM, VK (mcs) : Working on it. June 12, 2025 at 11:18 PM, Barta Rudi : @VK (mcs) The cathode reels are arriving slowly on lines 2, 3, and 6. Could you please check? Thank you. June 12, 2025 at 11:27 PM, VK (mcs) : Available material is not sufficient June 12, 2025 at 11:31 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 56 • Cathode: 112 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 25 • Cathode: 00 GF NC reel Available :- • AN: 40 • CA: 03 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:10 .Cathode:06 Load request .Anode:12 .Cathode:06 June 12, 2025 at 11:56 PM, Barta Rudi : @VK 1/2 AGV will not come for full magazines for a long time yet June 12, 2025 at 11:57 PM, VK (mcs) : Is it cathode? June 12, 2025 at 11:58 PM, Barta Rudi : Yes, cathode June 13, 2025 at 12:04 AM June 13, 2025 at 12:04 AM, VK (mcs) : AGVs are busy. I already increased priority. Currently there are 5 jobs before than machine 1/2 June 13, 2025 at 12:27 AM, 원재 : @FA NC Ca 1-1 1-2 1-3 2-3 4-3 FULL Magazine agv check please June 13, 2025 at 12:28 AM, 원재 : 6-3 full June 13, 2025 at 12:28 AM, 이주봉PM LEE JUBONG(FA) : @지석범PM (이반차FA) 반송 상태 확인좀 부탁해요~~ June 13, 2025 at 12:35 AM, 안종수 : NC AN 5-2 Out Port full magazine UR Check Please @FA June 13, 2025 at 12:35 AM, 안종수 : This message was deleted. June 13, 2025 at 12:36 AM, 안종수 : NC AN 5-3 Out Port full magazine UR Check Please @FA June 13, 2025 at 12:37 AM, 원재 : @FA Nc Ca #4 agv error Check please June 13, 2025 at 12:38 AM, 안종수 : NC AN #9 AGV Error. Please check @FA June 13, 2025 at 12:40 AM, VK (mcs) : Anode notching 5/2 port 2 UR received at 23:35 5/3 port 1 UR received at 00:26 June 13, 2025 at 1:10 AM, Anita Mirosnicsenko : Line 3 AGV#7 stopped please check! Thank you!! June 13, 2025 at 1:14 AM, Anita Mirosnicsenko : Please, someone check it, because multiple AGVs are stopped because of this! Thank you! June 13, 2025 at 1:30 AM, 안종수 : NC AN 2-2, 3-2 Out Port full magazine UR Check Please @FA June 13, 2025 at 1:37 AM, VK (mcs) : Notching Anode 2/2 port 2 UR received at 1:11 3/2 port 2 UR received at 00:50 June 13, 2025 at 1:39 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 49 • Cathode: 106 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 35 • Cathode: 00 GF NC reel Available :- • AN: 40 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:14 .Cathode:22 Load request .Anode:08 .Cathode:10 June 13, 2025 at 2:06 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 Carriers not moving. MLA5749 in unit (16070) aborted by OP action. Destination was port 09(16009) June 13, 2025 at 2:07 AM, VK (mcs) : Port 08 June 13, 2025 at 2:09 AM, Barta Rudi : @VK (mcs) The AGV has not come for a long time to pick up the finished magazines at NC CA 6/3. Please send an AGV. Thank you June 13, 2025 at 2:10 AM, VK (mcs) : I already fixed MLA5749. But please check , others carriers not moving. Thx June 13, 2025 at 2:47 AM, VK (mcs) : @FA Please check Anode Pre-STK A71 -C02 Light curtain detected. June 13, 2025 at 2:55 AM, 원재 : @FA Please check agv #7 June 13, 2025 at 2:55 AM, 원재 : Nc ca June 13, 2025 at 3:13 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 31 • Cathode: 110 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 37 • Cathode: 06 GF NC reel Available :- • AN: 34 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:14 .Cathode:10 Load request .Anode:14 .Cathode:06 June 13, 2025 at 3:33 AM, Barta Rudi : @VK (mcs) @FA Please unload the VD Ca 5-7 #43 machine with AGV and send the magazines to the warehouse. The technician will adjust the machine, as the heating wire will be replaced. Thank you. June 13, 2025 at 3:35 AM, VK (mcs) : @FA Please check it out. Thx June 13, 2025 at 3:46 AM, 안종수 : The facility is not operating due to NC AN 3-2 Full magazine UR delay. Please check it. @FA June 13, 2025 at 3:48 AM, VK (mcs) : UR received at 3:10 And transport job request reply was successful. June 13, 2025 at 3:49 AM, Barta Rudi : .. June 13, 2025 at 4:22 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 -C02 Load oversize error. June 13, 2025 at 4:35 AM, Nagy Tibor : solved June 13, 2025 at 4:37 AM, 원재 : @FA Nc Ca agv full magazine check please 2-3 3-3 4-3 2-1 June 13, 2025 at 4:49 AM, 원재 : @FA Vd nc check agv #1 June 13, 2025 at 4:49 AM, 원재 : Vd ca June 13, 2025 at 4:52 AM, VK (mcs) : For all machines , jobs assigned and they are waiting for AGVs June 13, 2025 at 4:57 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 46 • Cathode: 97 Pre STK > VD • Anode: 04 • Cathode: 00 Post STK > Stacking • Anode: 52 • Cathode: 04 GF NC reel Available :- • AN: 25 • CA: 02 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:15 .Cathode:04 Load request .Anode:06 .Cathode:10 June 13, 2025 at 5:03 AM, Mr.Miti (미티) FA : @VK (mcs) Hello! GF CA VD 5-7 please creat an unload job because technicans need to check the machine. June 13, 2025 at 5:07 AM, VK (mcs) : Transfer command created. June 13, 2025 at 5:07 AM, 원재 : @FA Ca vd avg all stop check please June 13, 2025 at 5:07 AM, Mr.Miti (미티) FA : Thank you! June 13, 2025 at 5:09 AM, Mr.Miti (미티) FA : Moving June 13, 2025 at 5:46 AM, T. Gàbornè C SL NC : Good Morning @FA Please check CA robot#3 MCS data report incomplete error Thx June 13, 2025 at 5:52 AM, 이도형 (Lee) : @FA NC Ca #3 Robot is stopped. Please check. June 13, 2025 at 6:04 AM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#03, 07 in VD CA idle. June 13, 2025 at 6:05 AM, Zaya/ivancsa FA : @mcs pls delete job VD CA AGV9, Chamber 5-7 closed June 13, 2025 at 6:06 AM, Shakir (MCS) : Checking June 13, 2025 at 6:06 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.13 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 13, 2025 at 6:14 AM, Shakir (MCS) : Transfer command created to post VD. AGV started to move now. Thank you June 13, 2025 at 6:18 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Skwarek Tibor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(3) Kertész Dani Lajos Gábor Nagy Tamás ———————————— Formation/Modul(3) Boromissza Zoltán Döme György Harasztia Zoli June 13, 2025 at 6:18 AM, Kertész Dániel : This message was deleted. June 13, 2025 at 6:19 AM, Shakir (MCS) : @FA Please check E0CNVC52_09_008 tray abnormal error and RTV: run time error. Thank you June 13, 2025 at 6:21 AM, Kertész Dániel : This message was deleted. June 13, 2025 at 6:21 AM, Kertész Dániel : Done June 13, 2025 at 6:34 AM, Shakir (MCS) : @FA Please check C1STKA71_C02 there is Ready off during Forking error. Thank you very much! June 13, 2025 at 7:07 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 25 • Cathode: 80 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 45 • Cathode: 09 GF NC reel Available :- • AN: 23 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:27 .Cathode:34 Load request .Anode:04 .Cathode:14 June 13, 2025 at 7:32 AM, T. Gàbornè C SL NC : @Fa Please check CA side AGV #7 . Thank you June 13, 2025 at 8:08 AM, KIM SEYEON [김세연]_FA : @Nauman/Ivancsa FA please remove unnecessary empty plate like yesterday June 13, 2025 at 8:13 AM, Nauman/Ivancsa FA : Actually, I am here handling in cathod June 13, 2025 at 8:13 AM, KIM SEYEON [김세연]_FA : 👍 June 13, 2025 at 8:25 AM, 은향(OH EUN HYANG) : @Nauman/Ivancsa FA please remove unnecessary empty plate like yesterday June 13, 2025 at 8:26 AM, 은향(OH EUN HYANG) : 피엠님 노만님이 이거에 대해서 방법을 알려달라 하는데 어떻게 하면 되나요? June 13, 2025 at 8:26 AM, 은향(OH EUN HYANG) : 이분은 여기 처음이래요 June 13, 2025 at 8:30 AM, KIM SEYEON [김세연]_FA : 어제 저랑 했는데요 June 13, 2025 at 8:30 AM, KIM SEYEON [김세연]_FA : 전화드리겠습니다 June 13, 2025 at 8:32 AM, 은향(OH EUN HYANG) : 넵^^ June 13, 2025 at 8:40 AM, Sazzad Bhai SKon : C1STKC71_P17/18 is oos. Light curtain error. Please reset. @FA June 13, 2025 at 8:46 AM, Sazzad Bhai SKon : GF VD AN chamber 38 and 49 have 3 plates! Why there are odd number plates? @FA June 13, 2025 at 8:48 AM, Sazzad Bhai SKon : According to logs, chamber 38 port 2 should have MLA6226 And chamber 49 should have MLA6236 on port 1 June 13, 2025 at 8:54 AM, Lajos Gábor F.A. : The chambers are closed,but the monitor show this ids June 13, 2025 at 8:55 AM, Sazzad Bhai SKon : I understand. Then I'll check more. Because currently they're showing on the STK! MLA6226 (C1STKA72, 0205504) MLA6236 (C1STKA72, 0105905) could you please confirm this? June 13, 2025 at 9:02 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 62 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 61 • Cathode: 29 GF NC reel Available :- • AN: 19 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:09 .Cathode:22 Load request .Anode:04 .Cathode:04 June 13, 2025 at 9:08 AM, 이도형 (Lee) : @FA VD Ca #9 AGV is stopped. Please check June 13, 2025 at 9:10 AM, Lajos Gábor F.A. : Its right, on the shelfs phisically these are this plate ids June 13, 2025 at 9:11 AM, Sazzad Bhai SKon : Then it is suspected that these plates are duplicated. We need to check after VD process is done. June 13, 2025 at 9:12 AM, Sazzad Bhai SKon : Could you please check this from manual port. We need to check physical id, not from SCS June 13, 2025 at 9:13 AM, Sazzad Bhai SKon : Please rack out it in STK manual port. And if it is MLA6236, keep it there until VD process is done for duplicate id June 13, 2025 at 9:20 AM, Yaroslav SL/C 6 line : Hello everyone @fa AGV #4 stopped near port outP11 ST conveyor 6 line. Please check June 13, 2025 at 9:21 AM, 정은탁 (Jung EunTak) : @FA NC An 2-1 AGV #6 UR Error. Please Check. June 13, 2025 at 9:22 AM, Kertész Dániel : This message was deleted. June 13, 2025 at 9:23 AM, Kertész Dániel : We checked it physically (without racking them out), not from CCS, And the ID's were correct. June 13, 2025 at 9:26 AM, Sazzad Bhai SKon : Thank you. We need to check the chambers also when VD process is done. June 13, 2025 at 9:43 AM, Sazzad Bhai SKon : GF VD CA chamber 43 is oos since 5:29 but there's a plate inside. Could you please check? @FA June 13, 2025 at 9:43 AM, Sazzad Bhai SKon : Same situation for chamber #25 VD CA June 13, 2025 at 9:45 AM, Kertész Dániel : Sorry, but the VD chambers are not our machines, so we won't check it. Next time please share this information with the @manufacturing June 13, 2025 at 9:48 AM, Sazzad Bhai SKon : @manufacturing please check chambers #43, #25. There's plate inside but machine is oos. June 13, 2025 at 10:08 AM, 정은탁 (Jung EunTak) : @FA NC An Robot #3 Error. Please Check. June 13, 2025 at 10:08 AM, T. Gàbornè C SL NC : VD CA #43 test mode finised, VD empty VD CA #25 machine problem: replace main vacuum set time not reached, Tecnician check the machine June 13, 2025 at 10:10 AM, Shakir (MCS) : @FA Please check C1STKC71_C02 there is Load Oversize error. Thank you! June 13, 2025 at 10:12 AM, Shakir (MCS) : @FA Please check C1STKA71_C01 there is SCP Main Power CP trip error. Thank you! June 13, 2025 at 10:13 AM, Shakir (MCS) : @FA Please check E0STKA51_C01 there is Ready off during Forking error. Thank you very much! June 13, 2025 at 10:17 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01, lift unload dest port auto off alarm. Thanks June 13, 2025 at 10:29 AM, 최정한.KOVA : This message was deleted. June 13, 2025 at 10:30 AM, 최정한.KOVA : VD. GF CA 5-9 상부우측 오른쪽 플레이트감지센서 고장입니다. 교체필요합니다. June 13, 2025 at 10:31 AM, KIM SEYEON [김세연]_FA : @최정한.KOVA 과장님 그럼 어떤 협조가 필요한건가요? 내부의 화물 agv로 수동 출고해야하나요? June 13, 2025 at 10:31 AM, 최정한.KOVA : 아니요. 매거진 챔버내에 없습니다. June 13, 2025 at 10:32 AM, 최정한.KOVA : 이건 보전쪽에서 센서교체해야합니다. June 13, 2025 at 10:33 AM, T. Gàbornè C SL NC : Technician check machine: Ok, but recipe problem. Please check. Thanks June 13, 2025 at 10:33 AM, KIM SEYEON [김세연]_FA : 네 그럼 LR 발생하지 않게 잘 조치 부탁드립니다. June 13, 2025 at 10:33 AM, 최정한.KOVA : 네 June 13, 2025 at 10:46 AM, 이도형 (Lee) : @FA NC An 전창고 공매거진 부족으로 로봇에서 풀매거진 투입안되고 있습니다. 로봇 포트에 오븐플레이트 투입해주시면 안돼나요? 한번 확인 및 부탁드립니다. June 13, 2025 at 10:54 AM, 이도형 (Lee) : @FA VD AN C1STKA71 is stopped. Please check June 13, 2025 at 10:55 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 13, 2025 at 10:55 AM, Shakir (MCS) : Checking June 13, 2025 at 10:57 AM, Kertész Dániel : @Shakir (MCS) Please check why the operators can't give an unload request on the C5STM040_P01 (it has an error message "UR carrier location mismatch") June 13, 2025 at 10:59 AM, 김희래 : 우선 현재 VD 전창고에 음극 공플레이트는 없습니다 June 13, 2025 at 11:00 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00(STK is OOS) • Cathode: 61 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 81 • Cathode: 26 GF NC reel Available :- • AN: 38 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:15 .Cathode:10 Load request .Anode:12 .Cathode:22 June 13, 2025 at 11:00 AM, KIM SEYEON [김세연]_FA : @Baek Hojong(백호종)FA 피엠님 FA삼구인원과 @Nauman/Ivancsa FA 님에게 해당작업 하는법 알려주십시오. June 13, 2025 at 11:01 AM, Shakir (MCS) : @FA Is there any maintenance going on STKA72? Thank you June 13, 2025 at 11:02 AM, Kertész Dániel : Yes, the korean technicians working there June 13, 2025 at 11:02 AM, Shakir (MCS) : Thanks for info June 13, 2025 at 11:03 AM, 김희래 : VD 전창고 에러 조치 중인 것 같은데 회수물류에 음극 공 플레이트 대기 중입니다. June 13, 2025 at 11:05 AM, 이도형 (Lee) : @FA Nc Ca agv full magazine check please 1-3, 2-3,3-3,4-3, 4-2 June 13, 2025 at 11:08 AM, Shakir (MCS) : There is no UR received for this port we only received LR at 10:49 MLA6210 assigned with AGV01. Could you tell me the actual carrier on P01 port. Thank you June 13, 2025 at 11:19 AM, Shakir (MCS) : Please check C1STKA72 (0200101) and C5STM040_P01 to confirm whether the carrier MLA6233 is located there. I need its current location. June 13, 2025 at 11:20 AM, Viki - SL_C : @FA AGV#1 stopped at the 5/4 stacking machine. Check it, please! Thank you! June 13, 2025 at 11:22 AM, Shakir (MCS) : @FA Please check C1CNV072_PS9, run time over error. Thank you June 13, 2025 at 11:25 AM, Zaya/ivancsa FA : @Shakir (MCS) Pls delete job ST CA AGV1 , Port has a material June 13, 2025 at 11:30 AM, Shakir (MCS) : Checking June 13, 2025 at 11:33 AM, Shakir (MCS) : Job cancelled and transferred Thank you June 13, 2025 at 11:45 AM, Lajos Gábor F.A. : Both place there is id MLA6233 June 13, 2025 at 11:46 AM, Shakir (MCS) : Did you checked it physically? June 13, 2025 at 11:47 AM, Lajos Gábor F.A. : Yes June 13, 2025 at 11:48 AM, Sazzad Bhai SKon : @KIM SEYEON [김세연]_FA hi pm, MLA6233 is duplicated. C1STKA72 (0200101) June 13, 2025 at 11:48 AM, Zaya/ivancsa FA : @Shakir (MCS) Pls delete job ST CA AGV10 , Port has a material 🥹 June 13, 2025 at 11:49 AM, Shakir (MCS) : Checking June 13, 2025 at 11:49 AM, Kertész Dániel : Which port is it? June 13, 2025 at 11:49 AM, KIM SEYEON [김세연]_FA : @은향(OH EUN HYANG) 상기 플레이트 꺼내서 실물확인해볼수 있을까요? June 13, 2025 at 11:51 AM, Zaya/ivancsa FA : C5STM040_P01 June 13, 2025 at 11:51 AM, Zaya/ivancsa FA : MLA6233 June 13, 2025 at 11:51 AM, Kertész Dániel : Thank you! June 13, 2025 at 11:52 AM, 이도형 (Lee) : @FA VD Ca #7 AGV is stopped. Please check. June 13, 2025 at 11:54 AM, 은향(OH EUN HYANG) : 저는 양극 나칭에 있어서 김종원 사원한테 전달했읍니다 June 13, 2025 at 11:57 AM, 은향(OH EUN HYANG) : 음극 풀매거진 입니다 June 13, 2025 at 11:57 AM, KIM SEYEON [김세연]_FA : @김종원 확인후 공유부탁드립니다 June 13, 2025 at 12:02 PM, 은향(OH EUN HYANG) : 이거 어떻게 할까요? June 13, 2025 at 12:03 PM, 은향(OH EUN HYANG) : 문제 없어보이는데 다시 후창고에 넣을까요? June 13, 2025 at 12:04 PM, Sazzad Bhai SKon : If the id is MLA6233, MES need to generate a new ID and paste it there June 13, 2025 at 12:10 PM, 은향(OH EUN HYANG) : I checked the kiosk. MLA 6233,OK June 13, 2025 at 12:15 PM, Sazzad Bhai SKon : It is duplicated, because there another plate with same carrier name in stacking 5 line June 13, 2025 at 12:22 PM, Dima Kusyk : @fa @mcs Good afternoon! Could you please check the supply of anode material? On the STK line, the delivery of anode material has slowed down significantly, and we are experiencing a shortage. Is there any issue on your side that might be causing this? June 13, 2025 at 12:23 PM, Shakir (MCS) : Working on it June 13, 2025 at 12:24 PM, 이도형 (Lee) : @FA Nc Ca agv full magazine check please 2-3 June 13, 2025 at 12:25 PM, 이도형 (Lee) : I won’t be taking the full magazine for an extended period. Please adjust the priorities accordingly June 13, 2025 at 12:26 PM, 이도형 (Lee) : 풀매거진 수동투입 비가동없이 진행중입니다. AGV 우선순위 부탁드립니다. June 13, 2025 at 12:28 PM, KIM SEYEON [김세연]_FA : 네 June 13, 2025 at 12:29 PM, QuangPhan : Hello! @FA NC AN AGV #1 error. Thanks June 13, 2025 at 12:41 PM, Shakir (MCS) : Line1 AGV01&AGV03 on the way June 13, 2025 at 12:42 PM, Shakir (MCS) : @FA Please check C1CNV072_P36 run time error June 13, 2025 at 12:48 PM, Dima Kusyk : Please check line 4 STK June 13, 2025 at 12:51 PM, 이도형 (Lee) : @FA NC Ca #6 AGV ERROR. Please check June 13, 2025 at 12:52 PM, Shakir (MCS) : Line4 AGV02, AGV01 on the way One job waiting for AGV June 13, 2025 at 12:59 PM, Shakir (MCS) : I have increased priority for anode ST, materials, maximum agvs are busy. You will receive materials soon. Thank you June 13, 2025 at 1:03 PM, T. Gàbornè C SL NC : @FA Please check VD CA 5_08, AGV left 1 plate. Thank you very much. June 13, 2025 at 1:11 PM, T. Gàbornè C SL NC : @MCS Please check the Reel warehouse CA #51 do you have tasks? The reels don't come. Thank you very much June 13, 2025 at 1:12 PM, Shakir (MCS) : Checking June 13, 2025 at 1:14 PM, Shakir (MCS) : LR received but No material available June 13, 2025 at 1:15 PM, Shakir (MCS) : @FA Please check C1CNV072_16_144, data mismatch error. Thank you June 13, 2025 at 1:29 PM, Truong : NC AN agv#8 error please check @Fa June 13, 2025 at 1:30 PM, Truong : Done June 13, 2025 at 2:14 PM, KIM SEYEON [김세연]_FA : @Zulaa/졸라/Ivancsa FA @Zaya/ivancsa FA please check NC CA AGV #10 & #5 June 13, 2025 at 2:19 PM, Zaya/ivancsa FA : korean technicians testing there June 13, 2025 at 2:20 PM, KIM SEYEON [김세연]_FA : @Nauman/Ivancsa FA please remove c1cnvc71 empty plate at 8025 and 8037 June 13, 2025 at 2:21 PM, Nauman/Ivancsa FA : Sure June 13, 2025 at 2:22 PM, KIM SEYEON [김세연]_FA : cathode June 13, 2025 at 2:24 PM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please share available lot June 13, 2025 at 2:24 PM, Shakir (MCS) : Checking June 13, 2025 at 2:27 PM, Nauman/Ivancsa FA : I checked full magazines are coming and working June 13, 2025 at 2:28 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 33 • Cathode: 41 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 79 • Cathode: 57 GF NC reel Available :- • AN: 61 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:01 .Cathode:06 Load request .Anode:14 .Cathode:18 June 13, 2025 at 2:32 PM, 은향(OH EUN HYANG) : @Hungarian Technician GF ST An CV Hoover Crane has stopped June 13, 2025 at 2:35 PM, T. Gàbornè C SL NC : @fa Please send VD CA 3_07 plate the sotorage , the machine check the technicians. Thank you June 13, 2025 at 2:38 PM, Nauman/Ivancsa FA : 14:36 GF NC CA Robot#3 8028 (MLC6010) deleted June 13, 2025 at 2:41 PM, QuangPhan : This message was deleted. June 13, 2025 at 2:41 PM, Shakir (MCS) : @FA Please check C1STKC71_P18/17, there is Light curtain error. Thank you June 13, 2025 at 2:48 PM, Sazzad Bhai SKon : @FA please check if C1STM120_P01 has carrier MLA6236? June 13, 2025 at 2:56 PM, Sazzad Bhai SKon : It is suspected that MLA6226 AND MLA6236 is duplicated. @FA please help us to find the duplicated plates June 13, 2025 at 2:58 PM, 이도형 (Lee) : @FA C1STCK71 P18 Data Mismatch Error Check June 13, 2025 at 3:01 PM, Sazzad Bhai SKon : Because MLC0066 is duplicated. Please check the plate id at C1STKC71_P18 And (C1STKC71, 0100204) June 13, 2025 at 3:07 PM, Lajos Gábor F.A. : Yes,it is June 13, 2025 at 3:08 PM, Sazzad Bhai SKon : And please rack out the other plate in manual port. C1STKC71, 0100204 June 13, 2025 at 3:50 PM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#10 in NC CA idle. June 13, 2025 at 3:50 PM, Shakir (MCS) : Working on it June 13, 2025 at 3:51 PM, Zulaa/졸라/Ivancsa FA : Thank you. June 13, 2025 at 4:01 PM, 정은탁 (Jung EunTak) : @FA VD Ca AGV #5 Error. Please Check. June 13, 2025 at 4:21 PM, Shakir (MCS) : ACS is not responding to MCS command could you please create manual job to gantry input ports. Thank you June 13, 2025 at 4:30 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 44 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 92 • Cathode: 44 GF NC reel Available :- • AN: 94 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:09 .Cathode:20 Load request .Anode:08 .Cathode:06 June 13, 2025 at 4:44 PM, 은향(OH EUN HYANG) : Please check if the plate is caught by the dry finished material PlateNo.MLA 2984 MGZ No, MA 2234,MA4523,MA2491,MA5447,MA1057,MA6341 @Mohammad Amir June 13, 2025 at 4:48 PM, Sazzad Bhai SKon : This is confirmed that MLA2984 (MA2491, 4523, 2344, 5447, 1057, 6431) VD process is done and ready for stacking process. Their process segment id is C3100 June 13, 2025 at 4:51 PM, Zaya/ivancsa FA : @mcs Pls delete job VD AN AGV6, Chamber closed June 13, 2025 at 4:51 PM, Shakir (MCS) : On it June 13, 2025 at 4:53 PM, Shakir (MCS) : Job cancelled June 13, 2025 at 4:53 PM, Zaya/ivancsa FA : thank you ☺️ June 13, 2025 at 5:00 PM, Nauman/Ivancsa FA : 16:58 GF NC AN robot#2 5037 MLA 0111 deleted June 13, 2025 at 5:00 PM, JAEYOON KIM / CS : VD CA 2-5 챔버 설비 수리한다고 매거진 다른 챔버로 옮겨달라 요청이 왔는데, 제조쪽에서 한분 오셔서 도와주실 수 있나요? June 13, 2025 at 5:02 PM, T. Gàbornè C SL NC : @fa Please send VD CA 3_07 plate the sotorage , the machine check the technicians. This machine open. Thank you June 13, 2025 at 5:04 PM, 정은탁 (Jung EunTak) : 메뉴얼로 진행후 타챔버에서 수동건조 진행하면 되나요? June 13, 2025 at 5:09 PM, Shakir (MCS) : Jobs have been created successfully to transfer these carriers to Post VD STK. However currently 3-7 VD CA is OOS that's why created command from MCS is not proceeding. Please make it in-service and after AGV will remove the carrier make it OOS and start repairing. Thank you June 13, 2025 at 5:10 PM, 정은탁 (Jung EunTak) : 후창고 메뉴얼 투입 진행하겠습니다 June 13, 2025 at 5:12 PM, 정은탁 (Jung EunTak) : 정정하겠습니다. AGV 이용하여 후창고 투입 진행하겠습니다. June 13, 2025 at 5:19 PM, Nauman/Ivancsa FA : 1. Time : 17:18 2. Machine : GF NC AN ROBOT# 3 3. Port : 5049 4. Plate : MLA2007 5. Work Process : added June 13, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 13, 2025 at 6:18 PM, Mohammad Amir : Good evening @All GF Next lot quantity available Pre STK > Notching • Anode: 24 • Cathode: 39 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 63 • Cathode: 59 GF NC reel Available :- • AN: 91 • CA: 00 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| VD Unload request .Anode:01 .Cathode:22 Load request .Anode:04 .Cathode:16 Thank you very much! June 13, 2025 at 6:34 PM, Khaliun/Ivancsa FA : @MCS VD CA 3/7 material please return to C1STKC72 thank you June 13, 2025 at 6:34 PM, Mohammad Amir : Good evening, Sure, Checking! June 13, 2025 at 6:36 PM, Mohammad Amir : Jobs have been created successfully to tranfer materials from VD CA 3-7 to Post VD STK. ✅ However currently VD CA 3-7 is OOS that's why AGVs are not able to pick the materials, please make the chamber 3-7 VD CA to In-service afterwards AGVs will start to assign. Thank you very much! June 13, 2025 at 6:39 PM, Khaliun/Ivancsa FA : Okey.Thank you very much! June 13, 2025 at 6:40 PM, Mohammad Amir : You are welcome. Feel free to contact me again if you need further assistance. June 13, 2025 at 7:13 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Could you please give me confirmation that which carrier actually exists on VD AN 3-5 P02? Thank you very much! June 13, 2025 at 7:25 PM, Khaliun/Ivancsa FA : MLA6235 June 13, 2025 at 7:29 PM, Mohammad Amir : Issue has been resolved ✅. Now Unload for VD AN 3-5 will be successful. Thank you very much! June 13, 2025 at 7:40 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 32 • Cathode: 42 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 47 • Cathode: 45 GF NC reel Available :- • AN: 84 • CA: 00 ////////////////////////// VD Unload request .Anode:31 .Cathode:22 Load request .Anode:06 .Cathode:19 Thank you very much! June 13, 2025 at 8:18 PM, Mohammad Amir : @FA Please check E0CNVA52_RTV01 there is Runtime Over error and it has blocked the reels delivery. Thank you! June 13, 2025 at 8:19 PM, Tetiana SL/D : Hello. Agv#2 stopped with error near Staсking Line 3/9 Please check @FA Thank you so much. June 13, 2025 at 8:33 PM, Nguyen Huy : @FA @MCS Hello, there's many full mgz at Outline C/V at NC CA 4/2 and 4/3 but there wasn't AGV to take them out, pls creat jobs for it, thank you June 13, 2025 at 8:34 PM, Mohammad Amir : Sure, Checking! June 13, 2025 at 8:34 PM, Nguyen Huy : CA 2/3 too, thank you @Mohammad Amir June 13, 2025 at 8:40 PM, Mohammad Amir : Jobs have been created successfully ✅. For 4-3 NC CA AG #3 has been assigned. For 4-2 and 2-3 NC CA ,also jobs have been created successfully, currently waiting for AGV as all AGVs are busy. ✅ I am monitoring. Thank you very much! June 13, 2025 at 8:40 PM, Nguyen Huy : Thank you so much for your help!! June 13, 2025 at 8:41 PM, Mohammad Amir : You are welcome! June 13, 2025 at 8:42 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0CNVC52_M04/08 there is Data Loss Error. Thank you very much! June 13, 2025 at 8:44 PM, 카스텔 발라지 F.A. : Working on it June 13, 2025 at 8:45 PM, Mohammad Amir : Köszönöm szepen 🙏. June 13, 2025 at 8:46 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check NC CA AGV#1 and AGV#2 it is blocking several AGVs and because of this there is delay in Empty magazine delivery and full magzine pickup. Thank you very much! June 13, 2025 at 8:51 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52 _07_012 there is INV-01 Run Time over error and because of this reels delivery has stopped. Thank you very much! June 13, 2025 at 8:53 PM, 전 운 (Jeon Woon) : @FA @MCS GF 6Line An Station unit 18 missmatch error plz check June 13, 2025 at 8:53 PM, Mohammad Amir : Sure ,Checking. June 13, 2025 at 8:55 PM, Mohammad Amir : Please confirm,are you referring to Stacking Line? Thank you very much! June 13, 2025 at 8:56 PM, 전 운 (Jeon Woon) : Yes June 13, 2025 at 8:57 PM, Mohammad Amir : Please confirm me the which carrier actually exists on 6-18 P01? Thank you very much! June 13, 2025 at 8:58 PM, Mohammad Amir : Is it MLA6226? Thank you very much! June 13, 2025 at 8:59 PM, Dániel Hufnágel : Correct, yes June 13, 2025 at 8:59 PM, Mohammad Amir : Thank you very much for the confirmation. I am working on the issue. June 13, 2025 at 9:00 PM, Mohammad Amir : Issue has been resolved ✅. Please press UR again. I am monitoring. Thank you very much! June 13, 2025 at 9:02 PM, Mohammad Amir : @Dániel Hufnágel @전 운 (Jeon Woon) For your information:- Stacking 6-18 issue has been resolved successfully ✅. AGV#8 has picked the materials successfully ✅. I am monitoring. Thank you very much! June 13, 2025 at 9:12 PM, Nguyen Huy : Hello, it's quite a long time and the issue still the same, pls check one more time, thank you June 13, 2025 at 9:13 PM, Mohammad Amir : Hello, I am constantly monitoring. Jobs have been created successfully ✅ however currently all AGVs are busy that's why you are witnessing delay. Thank you very much! June 13, 2025 at 9:16 PM, Mohammad Amir : Update :- For 4-2 NC CA ,AGV#2 has been assigned successfully ✅. I am monitoring. Thank you very much! June 13, 2025 at 9:27 PM, Nguyen Huy : Appreciate it!! June 13, 2025 at 9:27 PM, Mohammad Amir : Thank you very much! June 13, 2025 at 9:32 PM, Mohammad Amir : Update :- For 2-3 NC CA ,AGV#7 has assigned successfully ✅. Thank you very much! June 13, 2025 at 9:37 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKA71_C01 there is Laod Oversize Error. Thank you very much! June 13, 2025 at 9:39 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check C1CNV072_16_144 there is Data Mismatch error and it is blocking stacking materials delivery. Thank you very much! June 13, 2025 at 9:40 PM, Novák Károly F. A. : Checking June 13, 2025 at 9:41 PM, Yulya Kirsanova : Hello, I need help, (IN P26) Plate, it is in the wrong position. @All June 13, 2025 at 9:44 PM, Novák Károly F. A. : Solved June 13, 2025 at 9:44 PM, Novák Károly F. A. : Solved June 13, 2025 at 9:44 PM, Mohammad Amir : Köszönöm szepen 🙏. June 13, 2025 at 9:44 PM, Novák Károly F. A. : You are welcome June 13, 2025 at 9:46 PM, Yulya Kirsanova : Thank you June 13, 2025 at 9:47 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 20 • Cathode: 61 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 52 • Cathode: 30 GF NC reel Available :- • AN: 97 • CA: 00 ////////////////////////// VD Unload request .Anode:09 .Cathode:14 Load request .Anode:06 .Cathode:06 Thank you very much! June 13, 2025 at 9:48 PM, 김현태 : Please move the magazine in @FA VD CA 3-7 #25 to STKA72 June 13, 2025 at 9:49 PM, 김현태 : This message was deleted. June 13, 2025 at 9:49 PM, 김현태 : @Fa June 13, 2025 at 9:49 PM, Khaliun/Ivancsa FA : @MCS June 13, 2025 at 9:50 PM, Mohammad Amir : Jobs have been created successfully to tranfer materials from VD CA 3-7 to Post VD STK. ✅ However currently VD CA 3-7 is OOS that's why AGVs are not able to pick the materials, please make the chamber 3-7 VD CA to In-service afterwards AGVs will start to assign. Thank you very much! June 13, 2025 at 9:52 PM, 김현태 : Thanks you June 13, 2025 at 9:52 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_16_155 there is INV-01 Runtime Over error and it is blocking stacking materials delivery. Thank you very much! June 13, 2025 at 9:52 PM, Mohammad Amir : You are most welcome! June 13, 2025 at 9:53 PM, Novák Károly F. A. : Checking June 13, 2025 at 9:54 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKC51_C02 there is Port interface error . Thank you very much! June 13, 2025 at 9:54 PM, 김현태 : VD CA AGV #10 error Thanks You June 13, 2025 at 9:56 PM, Novák Károly F. A. : Solved June 13, 2025 at 9:56 PM, Novák Károly F. A. : Checking June 13, 2025 at 9:56 PM, Mohammad Amir : Köszönöm szepen 🙏 June 13, 2025 at 9:57 PM, Novák Károly F. A. : Szívesen. June 13, 2025 at 10:00 PM, Mohammad Amir : @FA @Khaliun/Ivancsa FA Please check currently VD CA 3-7 is OOS that's why created jobs are pending. Thank you very much! June 13, 2025 at 10:02 PM, Novák Károly F. A. : Done June 13, 2025 at 10:04 PM, 김현태 : @MCS after VD CA 5-8 #44 construction was completed, AGV took only one plate of the magazine. June 13, 2025 at 10:05 PM, Mohammad Amir : Checking June 13, 2025 at 10:05 PM, Khaliun/Ivancsa FA : But they didn't give me work on 3/7. June 13, 2025 at 10:08 PM, Mohammad Amir : Issue has been resolved ✅. AGV#04 has assigned successfully ✅. I am monitoring. Thank you very much! June 13, 2025 at 10:09 PM, 김현태 : Thanks you June 13, 2025 at 10:09 PM, Mohammad Amir : You are welcome! June 13, 2025 at 10:10 PM, Mohammad Amir : There is already command exists to travefer these materials from CA VD 3-7. However currently VD CA 3-7 is OOS that's why materials are not being transferred. @FA please check VD CA 3-7 it is OOS that's why created jobs are Alternated. Thank you very much! June 13, 2025 at 10:18 PM, Tuya Ivancsa FA : @Mohammad Amir VD CT 3-8 chamber empty. Pls delete job AGV4 AGV8 June 13, 2025 at 10:18 PM, Mohammad Amir : Sure , Checking June 13, 2025 at 10:18 PM, Mohammad Amir : Is it CA chamber ? Thank you very much! June 13, 2025 at 10:20 PM, Tuya Ivancsa FA : Yes sure June 13, 2025 at 11:00 PM, Mohammad Amir : @FA @Manufacturing Please check this issue still exists. Thank you very much! June 13, 2025 at 11:09 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C02 there is MCP error. Thank you! June 13, 2025 at 11:24 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C02 there is MCP error. Thank you! June 13, 2025 at 11:27 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 66 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 47 • Cathode: 27 GF NC reel Available :- • AN: 81 • CA: 00 ////////////////////////// VD Unload request .Anode:01 .Cathode:18 Load request .Anode:04 .Cathode:08 Thank you very much! June 13, 2025 at 11:30 PM, Nguyen Huy : @Mohammad Amir pls setup AGV to be priority for NC CA 3/3, 4/3 and 2/3 for now, the Outline C/V was full, thank you June 13, 2025 at 11:31 PM, Mohammad Amir : Sure,checking. June 13, 2025 at 11:31 PM, 인제(Hwang) : NC An RTV Error June 13, 2025 at 11:36 PM, Mohammad Amir : I have provided priorities for the mentioned machines successfully ✅. As soon as AGVs will be free it will assign to these machines. I am monitoring. Thank you very much! June 13, 2025 at 11:40 PM, Mohammad Amir : Update :- For 2-3 NC CA, AGV#4 has been assigned successfully ✅. Thank you! June 13, 2025 at 11:43 PM, Nguyen Huy : Thank you so much for your help!! June 13, 2025 at 11:44 PM, Mohammad Amir : I am very glad to help you. Feel free to reach out to me again if you need any further assistance. June 13, 2025 at 11:46 PM, Khaliun/Ivancsa FA : @Mohammad Amir VD CA AGV#7 check pls June 13, 2025 at 11:47 PM, Mohammad Amir : Sure, Checking June 13, 2025 at 11:49 PM, Mohammad Amir : Issue has been resolved ✅ AGV#7 has started to move. Thank you very much! June 13, 2025 at 11:54 PM, Mohammad Amir : @FA @Manufacturing Please check this issue still exists. Thank you very much! June 14, 2025 at 12:00 AM June 14, 2025 at 12:00 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1CNV072_16_181 there is INV-01 Runtime Over error and it is blocking stacking materials delivery. Thank you very much! June 14, 2025 at 12:05 AM, Nguyen Huy : Now pls put priority on NC CA 6/2, NC AN 5/1, 5/3, 3/1, 2/2, thank you @Mohammad Amir June 14, 2025 at 12:05 AM, Mohammad Amir : Sure,Checking. June 14, 2025 at 12:10 AM, Mohammad Amir : I have provided priorities for the mentioned machines successfully ✅. As soon as AGVs will be free it will assign to these machines. Could you please press UR for 5-3 NC AN again,there was issue in Last UR. Thank you very much! June 14, 2025 at 12:12 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0STKC51_C01 there is Forl#2 Center Error when First Active. Thank you very much! June 14, 2025 at 12:24 AM, Novák Károly F. A. : Solved June 14, 2025 at 12:24 AM, Mohammad Amir : Köszönöm szepen 🙏 June 14, 2025 at 12:36 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16_155 there is INV-01 Runtime Over error and it is blocking stacking materials delivery. Thank you very much! June 14, 2025 at 12:57 AM, P.Bence A SSL : Check again please @Mohammad Amir Thank you . June 14, 2025 at 12:57 AM, Mohammad Amir : Sure Checking! June 14, 2025 at 1:00 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 50 • Cathode: 79 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 26 • Cathode: 19 GF NC reel Available :- • AN: 70 • CA: 00 ////////////////////////// VD Unload request .Anode:14 .Cathode:17 Load request .Anode:06 .Cathode:08 Thank you very much! June 14, 2025 at 2:00 AM, Mohammad Amir : @FA @Manufacturing Please check this issue still exists. Thank you very much! June 14, 2025 at 2:10 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check E0CNVA52_RTV01, lift unload dest port auto off alarm ,it is blocking reels delivery. Thank you very much! June 14, 2025 at 2:11 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16104 there is Data Mismatch error and 16102 there is Data Loss error and it is blocking stacking materials delivery. Thank you very much! June 14, 2025 at 2:21 AM, 김정희(Jeong hee FA) : @Mohammad Amir Please add GFC_VD 3-7 STK72 Thank you June 14, 2025 at 2:25 AM, Mohammad Amir : Dear Sir, Jobs have been created successfully to transfer materials from VD CA 3-7 to Post VD STK 72. ✅ However currently VD CA 3-7 is OOS that's why AGVs are not able to pick the materials and job is not executing. @FA , please make the chamber 3-7 VD CA to In-service afterwards AGVs will start to unload the chamber. Thank you very much! June 14, 2025 at 2:41 AM, Mohammad Amir : @FA Please check this issue it still exists. Thank you very much! June 14, 2025 at 2:45 AM, Khaliun/Ivancsa FA : Yes June 14, 2025 at 2:46 AM, Khaliun/Ivancsa FA : they are still there June 14, 2025 at 2:47 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 46 • Cathode: 79 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 31 • Cathode: 25 GF NC reel Available :- • AN: 79 • CA: 00 ////////////////////////// VD Unload request .Anode:05 .Cathode:15 Load request .Anode:12 .Cathode:04 Thank you very much! June 14, 2025 at 2:49 AM, Mohammad Amir : Yes , created command can not proceed because VD CA 3-7 is Out of Service and because of this All the created jobs to trannsfer materials to STK72 is pending. Please make VD CA 3-7 into sevice and afterwards jobs will be executed. Thank you very much! June 14, 2025 at 3:26 AM, Mohammad Amir : Update : AGV#8 & #9 has started to unload the VD CA 3-7 successfully ✅. Thank you very much! June 14, 2025 at 3:27 AM, Tuya Ivancsa FA : @Mohammad Amir the VD AN chamber 6-10 inside magazine. Pls delete job AGV 7 June 14, 2025 at 3:27 AM, Mohammad Amir : Sure Checking June 14, 2025 at 3:28 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 14, 2025 at 4:02 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Is C1CNV072 under maintenance? It is constantly getting OOS and because of this there is shortage of stacking materials. Thank you very much! June 14, 2025 at 4:27 AM, Novák Károly F. A. : Solved June 14, 2025 at 4:27 AM, Mohammad Amir : Köszönöm szepen 🙏 June 14, 2025 at 4:27 AM, Novák Károly F. A. : Szívesen June 14, 2025 at 4:32 AM, Khaliun/Ivancsa FA : @Mohammad Amir pls check VD AN AGV#7 June 14, 2025 at 4:32 AM, Mohammad Amir : Sure, Checking June 14, 2025 at 4:34 AM, Mohammad Amir : Issue has been resolved ✅. AGV#7 has started to move. Thank you very much! June 14, 2025 at 4:35 AM, Khaliun/Ivancsa FA : Thank you very much! June 14, 2025 at 4:35 AM, Mohammad Amir : You are welcome. Feel free to contact me again if you need any further assistance. June 14, 2025 at 4:53 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKC71_C01 there is SCP Main Power CP trip error. Thank you very much! June 14, 2025 at 5:00 AM, 인제(Hwang) : @FA Please send the plates in the VD An 3-3 chamber to the warehouse June 14, 2025 at 5:01 AM, Mohammad Amir : Checking June 14, 2025 at 5:01 AM, P.Bence A SSL : L6 stacking Agv 4 stop check please June 14, 2025 at 5:04 AM, Mohammad Amir : Jobs have been created successfully to transfer these pallets to Post VD warehouse ✅. Thabk you very much! June 14, 2025 at 5:07 AM, 인제(Hwang) : Thank you! June 14, 2025 at 5:07 AM, Mohammad Amir : You are welcome! June 14, 2025 at 5:11 AM, P.Bence A SSL : L6 stacking Agv 7 stop please check June 14, 2025 at 5:19 AM, 이주봉PM LEE JUBONG(FA) : @정다은 @인제(Hwang) MLA6230(UNK) 중복plate 투입하려니 안되서 확인해보니까 실제로 2개의 플레이트 바코트가 동일합니다.(중복) 인제주임님한테 플레이트 인계 했습니다. 또한 양극 메거진 오븐플레이트 UNK 발생으로 인해 출고 후 재투입 하려했으나 오류가 발생하여 원인 분석중이오니 해당 플레이트 인제주임에게 내용 전달했습니다.(이동금지) 별도 관리 장소에 보관 및 메모지 부착 했습니다. 참고 부탁드립니다. -MLC2165 MC2170.2371.6405.3495.6022.4152 -MLC4028 MC1338.5228.4398.3407.2184.5132 MLC3163 MC3568.4373.2425.6055.4322.4269) -MLC4028. MC5132.4398.5228.1338.3407.2184) June 14, 2025 at 5:21 AM, Mohammad Amir : Good morning@All GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 81 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 25 • Cathode: 27 GF NC reel Available :- • AN: 87 • CA: 00 ////////////////////////// VD Unload request .Anode:11 .Cathode:10 Load request .Anode:04 .Cathode:04 Thank you very much! June 14, 2025 at 5:46 AM, Selem /Ivancsa FA : Amir(MCS) There is no magazine in dryer #21 at VD AN chamber 3-3. Please cancel the pick-up job for the AGV. Thank you. June 14, 2025 at 5:46 AM, Mohammad Amir : Sure , Checking June 14, 2025 at 5:47 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 14, 2025 at 5:51 AM, Mohammad Amir : @Manufacturing Please check E0CNC52_M10 there is a job to delivery reels however RTV can't deliver. Please check the port M10 , because of this RTV is busy and Reels delivery has stopped. Thank you very much! June 14, 2025 at 5:53 AM, 김현태 : VD CA AGV 2-8 #17 error Thanks June 14, 2025 at 6:04 AM, Hữu Thắng : @MCS @FA Could u please check RTV . There’s no material provide for us for a while . Thank you June 14, 2025 at 6:04 AM, Hữu Thắng : NC CA June 14, 2025 at 6:07 AM, Mohammad Amir : @Hữu Thắng Due to this issue ,you are facing Reels supply distruption. @FA @Kertész Dániel please check this issue. Thank you very much! June 14, 2025 at 6:08 AM, Baek Hojong(백호종)FA : Day shift FA Schedule Date: 2025.06.14 Time:06:00~18:00 백호종 Baek Hojong PM 1. Elec 송태용 (Song Taeyong) 2. Assy GF 김종원 (Kim Jongwon) GF 오은향 (OH eunhyang) June 14, 2025 at 6:08 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 3 Helyettesítés: Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(2) Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 14, 2025 at 6:14 AM, Kertész Dániel : Good morning! Now the reels on their way! Thank you! June 14, 2025 at 6:19 AM, Ankhaa/Ivancsa FA : @mcs VD CA 2-8 Chambar is empty please delete the job June 14, 2025 at 6:20 AM, duzzaman Md (MCS) : Good morning. Done ! June 14, 2025 at 6:26 AM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#07 in VD CA , AGV# 04 VD AN idle. Thank you. June 14, 2025 at 6:40 AM, duzzaman Md (MCS) : Those will move. Jobs created to the STK June 14, 2025 at 7:05 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 51 • Cathode: 87 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 19 • Cathode: 02 GF NC reel Available :- • AN: 89 • CA: 00 ////////////////////////// VD Unload request .Anode:26 .Cathode:17 Load request .Anode:08 .Cathode:06 Thank you very much! June 14, 2025 at 7:16 AM, Hữu Thắng : Good morning @duzzaman Md (MCS) ! There’s no reels for GF NC CA ? June 14, 2025 at 7:18 AM, duzzaman Md (MCS) : Yeah, seems no materials available June 14, 2025 at 7:20 AM, duzzaman Md (MCS) : @FA Please check the manual port 02 of E0STKC51 Thank you June 14, 2025 at 7:46 AM, Hữu Thắng : @MCS Could you please monitoring RTV in GF NC CA . Because we are ran out of reels . Machine will be stop soon . Thank you for your cooperation June 14, 2025 at 7:47 AM, duzzaman Md (MCS) : Sure thing. Checking on it June 14, 2025 at 7:49 AM, duzzaman Md (MCS) : Reels Available: Ca: 00 An: 82 June 14, 2025 at 7:51 AM, Hữu Thắng : @FA NC CA Robot#2 Error . Plz check it . Thanks June 14, 2025 at 8:51 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 40 • Cathode: 73 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode: 45 GF NC reel Available :- • AN: 85 • CA: 00 ////////////////////////// VD Unload request .Anode:04 .Cathode:18 Load request .Anode:06 .Cathode:16 Thank you ! June 14, 2025 at 8:51 AM, QuangPhan : Hello! Dear @FA Could you please transfet these plates in VD AN 4_6 #33 to KA72 . we will run test. . Thank you June 14, 2025 at 8:53 AM, Dariimaa/다리마/Ivancsa : @MCS please check Thank you! June 14, 2025 at 8:54 AM, duzzaman Md (MCS) : Ports are OOS. Please transfer them manually. Thank you June 14, 2025 at 8:59 AM, Hữu Thắng : @FA VD CA 1/3 AGV stopped . Plz check it . Thanks June 14, 2025 at 9:00 AM, Dariimaa/다리마/Ivancsa : @Baek Hojong(백호종)FA Please transfer to STK72 warehouse. Thank you! June 14, 2025 at 9:03 AM, Hữu Thắng : @MCS Could you please check those chamber due to only 2 plates 1/1 2/8 2/9 Also Transfer these magazines VD CA 4/2 to KC72 plz . Thanks June 14, 2025 at 9:10 AM, duzzaman Md (MCS) : CA 1/1: there's active UR and job. 2/8: please raise LR 2/9: there is active UR and job June 14, 2025 at 9:11 AM, duzzaman Md (MCS) : Cathode 4/2 Ports are OOS. Please transfer them manually. Thank you June 14, 2025 at 9:11 AM, Dariimaa/다리마/Ivancsa : @Baek Hojong(백호종)FA Please transfer to STK72 warehouse. Thank you! June 14, 2025 at 9:14 AM, Baek Hojong(백호종)FA : I,m going where are you? June 14, 2025 at 9:18 AM, Dariimaa/다리마/Ivancsa : VD AN June 14, 2025 at 9:19 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_09_007 Light curtain error Thank you June 14, 2025 at 9:26 AM, Hữu Thắng : Can you plz recheck 2/8 June 14, 2025 at 9:28 AM, duzzaman Md (MCS) : LR was successful. Unfortunately,no materials available. June 14, 2025 at 9:33 AM, KIM SEYEON [김세연]_FA : @assembly shift leader please check VD OP push UR when VD is finished June 14, 2025 at 9:39 AM, Kateryna SSL C : @Hữu Thắng @QuangPhan June 14, 2025 at 10:08 AM, 정은탁 (Jung EunTak) : @FA VD Ca AGV #5 Error. Please Check. June 14, 2025 at 10:19 AM, QuangPhan : Hello! @MCS Could you please check RTV - NC AN. We didn’t recieved material for a while June 14, 2025 at 10:20 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKA71 cranes Light curtain error June 14, 2025 at 10:26 AM, duzzaman Md (MCS) : Everything seems okay from MCS side. Too many jobs going to CNVA51_P07 Increased the priority for RTV job June 14, 2025 at 10:32 AM, KIM SEYEON [김세연]_FA : it seems CA material is zero June 14, 2025 at 10:33 AM, duzzaman Md (MCS) : Yes, no material available in the CA side AN: 92 June 14, 2025 at 10:35 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 31 • Cathode: 79 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 18 • Cathode: 39 GF NC reel Available :- • AN: 94 • CA: 00 ////////////////////////// VD Unload request .Anode:14 .Cathode:00 Load request .Anode:06 .Cathode:04 Thank you ! June 14, 2025 at 10:57 AM, duzzaman Md (MCS) : I've checked further. It's been 0 since morning. There are 16 materials available. But its getting filtered and becoming 0 in 'What Next Filter STK in NC' For some of them the carrier state is not 'stored/installed' Also, some carrier info is not available in MCS. A reconciliation might help in this case. June 14, 2025 at 11:30 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV01 there is Runtime Over error Thank you! June 14, 2025 at 11:30 AM, Yaroslav SL/C 6 line : @fa AGV4 stopped near 6 line ST #20. Please check June 14, 2025 at 11:44 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please check why Assembly GF C1STKA71 P21 has a lot of empty plates. June 14, 2025 at 11:44 AM, duzzaman Md (MCS) : Checking June 14, 2025 at 11:51 AM, duzzaman Md (MCS) : Carriers are moving now. June 14, 2025 at 11:55 AM, duzzaman Md (MCS) : @FA C1CNV072 is OOS Please check June 14, 2025 at 11:56 AM, duzzaman Md (MCS) : Also please check E0CNVA52_07_005 Light curtain error June 14, 2025 at 12:00 PM, duzzaman Md (MCS) : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01,it will increase stacking materials delivery speed. Thank you very much! June 14, 2025 at 12:30 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 33 • Cathode: 81 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 41 • Cathode: 47 GF NC reel Available :- • AN: 74 • CA: 00 ////////////////////////// VD Unload request .Anode:02 .Cathode:04 Load request .Anode:10 .Cathode:04 Thank you ! June 14, 2025 at 12:41 PM, duzzaman Md (MCS) : @FA Please check C1STKC71_C01 Load oversize error. Thank you June 14, 2025 at 12:42 PM, 은향(OH EUN HYANG) : hungarian technology Gf AnNc Come Here June 14, 2025 at 12:43 PM, 은향(OH EUN HYANG) : Corrected by Ca. June 14, 2025 at 1:15 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_085 run time over error. Thank you June 14, 2025 at 1:18 PM, Skwarek Tibor : Done June 14, 2025 at 1:33 PM, Hữu Thắng : @FA NC CA AGV#10 error . Plz check it . Thx June 14, 2025 at 1:36 PM, duzzaman Md (MCS) : @FA please check c1stka71 cranes. Light curtain error. Thank you June 14, 2025 at 1:59 PM, QuangPhan : Hello! Dear @FA Could you please transfet these plates in VD AN 6-2 #57 to KA72 . we will run test. . Thank you June 14, 2025 at 2:00 PM, QuangPhan : @duzzaman Md (MCS) June 14, 2025 at 2:00 PM, duzzaman Md (MCS) : On it June 14, 2025 at 2:02 PM, duzzaman Md (MCS) : Isn't AN VD 6-2, Anode VD #47 ? June 14, 2025 at 2:07 PM, QuangPhan : Sorry. It is #47 June 14, 2025 at 2:07 PM, duzzaman Md (MCS) : Its alright. Thank you!Jobs been created from VD AN 6-2 June 14, 2025 at 2:13 PM, Zulaa/졸라/Ivancsa FA : Chamber is closed. Check pls. June 14, 2025 at 2:26 PM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) VD AN 6-2 door is closed. Please delete the job. Thank you! June 14, 2025 at 2:27 PM, duzzaman Md (MCS) : Done June 14, 2025 at 3:08 PM, 심재훈 : 양극 2-3호기 agv가 전극 가지러 안옵니다. 10분정도 설비 정지 하고 있습니다 June 14, 2025 at 3:11 PM, KIM SEYEON [김세연]_FA : AGV 6호기가 작업중에 있습니다. June 14, 2025 at 3:12 PM, KIM SEYEON [김세연]_FA : 현재 노칭은 300spm인데, 그에 반해 자동화는 그 속도만큼 물동량이 안나오고 있습니다. 아마 이런일이 당분간 지속될것 같습니다. June 14, 2025 at 3:25 PM, duzzaman Md (MCS) : @FA Please check E0CNVC51_08_011 run time over error. Thank you June 14, 2025 at 3:25 PM, Farkas Tamàs : Ok June 14, 2025 at 3:30 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 41 • Cathode: 95 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 25 • Cathode: 34 GF NC reel Available :- • AN: 75 • CA: 00 ////////////////////////// VD Unload request .Anode:08 .Cathode:04 Load request .Anode:06 .Cathode: 30 Thank you ! June 14, 2025 at 3:51 PM, Hữu Thắng : @MCS @FA Could you please check RTV in NC CA has an alarm : STP-01-UP Cylinder Errror . Thanks June 14, 2025 at 3:55 PM, Kertész Dániel : Done June 14, 2025 at 3:59 PM, duzzaman Md (MCS) : 0lease check the CNVC52,too. 09_003 port Light curtain error Thanks June 14, 2025 at 4:18 PM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. June 14, 2025 at 4:21 PM, Dariimaa/다리마/Ivancsa : Solved June 14, 2025 at 5:47 PM, QuangPhan : Hello! @duzzaman Md (MCS) Please check Job of the half chamber VD AN 6-3 #48 LR VD AN 2-1 #10 LR VD AN 2-8 #17 LR June 14, 2025 at 5:48 PM, Shakir (MCS) : Checking June 14, 2025 at 5:48 PM, Karina : This message was deleted. June 14, 2025 at 5:50 PM, Shakir (MCS) : 6-3 : LR received successfully, Job initiated 2-1 : LR received successfully, Job initiated 2-8 : Chamber already full. Thank you June 14, 2025 at 6:02 PM, Yulya Kirsanova : Hello. Agv#2 stopped with error near Staсking Line 3/13 Please check @fa Thank you so much. @all June 14, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0):- Sick (0):- Holiday (1): Kiss Balázs Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(6): GF: Novák Károly, Zsurbej Zsolt, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 14, 2025 at 6:13 PM, Shakir (MCS) : @FA Please check C1STKA71_P16_OP01 there is Data mismatch error. Thank you June 14, 2025 at 6:25 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 97 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 25 • Cathode: 19 GF NC reel Available :- • AN: 31 • CA: 00 ////////////////////////// VD Unload request .Anode:00 .Cathode:02 Load request .Anode:10 .Cathode: 00 Thank you ! June 14, 2025 at 6:30 PM, Shakir (MCS) : @FA Please also check E0STKC51_C01 there is Load Oversize error. Thank you June 14, 2025 at 6:33 PM, Shakir (MCS) : @Novák Károly F. A. Still exist, Job delayed June 14, 2025 at 6:51 PM, Shakir (MCS) : @FA Please check E0STKC51_C02 Fork1 load position error. Thank you June 14, 2025 at 7:05 PM, Zsurbej Zsolt F.A. : Done June 14, 2025 at 7:08 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_053/52 run time over error. Thank you June 14, 2025 at 7:49 PM, Maya/IvancsaFA left this chatroom. June 14, 2025 at 8:07 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 there is Runtime Over error Thank you! June 14, 2025 at 8:08 PM, Novák Károly F. A. : Checking June 14, 2025 at 8:11 PM, Selem /Ivancsa FA : Shakir(MCS) AN VD #18, chambers 2-9 are empty. Kindly cancel the AGV command for picking up the goods. Thank you June 14, 2025 at 8:11 PM, Ivan Chobitko : @fa Please check AGV 4 ST L6 machine #4 June 14, 2025 at 8:14 PM, Novák Károly F. A. : Solved June 14, 2025 at 8:15 PM, Shakir (MCS) : As I see there is a plate MLA1163 on P02, In ACS and MCS both. Need confirmation: Chamber empty? June 14, 2025 at 8:18 PM, Selem /Ivancsa FA : Yes, the chamber is completely empty. June 14, 2025 at 8:20 PM, Shakir (MCS) : Job cancelled, Thanks June 14, 2025 at 8:21 PM, Shakir (MCS) : @Selem /Ivancsa FA Please check 3-3 AN VD, Is there any plate inside or empty. Thank you June 14, 2025 at 8:22 PM, Ivan Chobitko : Come please again Same problem June 14, 2025 at 8:23 PM, Selem /Ivancsa FA : Yes, the chamber is completely empty. June 14, 2025 at 8:26 PM, Barta Rudi : @FA NC Ca 2/1 AGV10 stop, please check, thank you June 14, 2025 at 8:31 PM, 김현태 : @FA Please send the plates in the VD CA 5-5 chamber to the warehouse June 14, 2025 at 8:33 PM, Ivan Kasian Sl 5L 🥹 : @fa check please agv #6 near line 3.1 Stack Thank you June 14, 2025 at 8:35 PM, Shakir (MCS) : @Selem /Ivancsa FA & @Khaliun/Ivancsa FA June 14, 2025 at 8:36 PM, Shakir (MCS) : Transfer this from ACS or make it Inservice chamber i will send. June 14, 2025 at 8:37 PM, Jun(정우준)_SKOH FA : This message was deleted. June 14, 2025 at 8:39 PM, Barta Rudi : @Shakir (MCS) Hello. The AGV is not picking up the finished magazines from the cathode 2/3, 3/3, 4/3, and 4/2 machines. Please check. Thank you. June 14, 2025 at 8:39 PM, Jun(정우준)_SKOH FA : This message was deleted. June 14, 2025 at 8:40 PM, Barta Rudi : And 1/3 CA. June 14, 2025 at 8:40 PM, Elena SL : Hello all. Please check AGV #4 NC AN near line 5. Thank you June 14, 2025 at 8:40 PM, Jun(정우준)_SKOH FA : @assy @Noémi (소미) 번역 해주세요! GF ST AN 2라인에서 매거진 플레이트에 안착 하지 않은채로 반송해서 에러 발생 중입니다. 안착 시키고 보낼 수 있게 조치 부탁드립니다! June 14, 2025 at 8:47 PM, Noémi (소미) : @assy GF ST AN 2-es soron a magazinok a platen nem megfelelő pozícióban lettek lehelyezve, ezért a küldés során error keletkezett. Kérem, hogy intézkedjenek az ügyben, hogy megfelelő pozícióban legyenek, a szállítás érdekében! June 14, 2025 at 8:47 PM, 김현태 : NC AN AGV #4 error. Thanks June 14, 2025 at 8:48 PM, Shakir (MCS) : Jobs have been created successfully however currently all AGVs are busy that's why you facing delay. I have increased priority for long delay mgz. Thank you June 14, 2025 at 8:50 PM, Shakir (MCS) : 1/3: AGV03 assigned on the way ✅ June 14, 2025 at 9:08 PM, Khaliun/Ivancsa FA : @MCS VD AN AGV#6 check pls June 14, 2025 at 9:13 PM, Shakir (MCS) : Moving June 14, 2025 at 9:17 PM, 김지수PM(Gyuri)_FA : This message was deleted. June 14, 2025 at 9:50 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 25 • Cathode: 104 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 24 • Cathode: 21 GF NC reel Available :- • AN: 16 • CA: 09 ///////////////////////////////////////// VD Unload request .Anode:31 .Cathode:18 Load request .Anode:10 .Cathode: 04 Thank you ! June 14, 2025 at 10:18 PM, Chinges Fa : NC full magazine is charging MCS check AGV#7 June 14, 2025 at 10:19 PM, Shakir (MCS) : CA or AN June 14, 2025 at 10:20 PM, Chinges Fa : Sorry Cathode June 14, 2025 at 10:26 PM, Barta Rudi : @Fa NC CA 5/2 AGV 4 stop, please check thank you June 14, 2025 at 10:28 PM, Shakir (MCS) : AGV started to move June 14, 2025 at 10:28 PM, Chinges Fa : Thank you so much June 14, 2025 at 10:30 PM, Chinges Fa : Solved June 14, 2025 at 10:49 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 there is Runtime Over error Thank you! June 14, 2025 at 10:50 PM, Novák Károly F. A. : Checking June 14, 2025 at 10:55 PM, Khaliun/Ivancsa FA : @MCS VD AN AGV#3 check pls June 14, 2025 at 10:59 PM, Shakir (MCS) : This message was deleted. June 14, 2025 at 10:59 PM, Novák Károly F. A. : Solved June 14, 2025 at 10:59 PM, Shakir (MCS) : Job assigned to STKA72 Thank you June 14, 2025 at 11:01 PM, Khaliun/Ivancsa FA : Still idle. Thank you. June 14, 2025 at 11:03 PM, Shakir (MCS) : MCS command not responding, could send to post vd stk manually by ACS. June 14, 2025 at 11:06 PM, 인제(Hwang) : NC An AGV#9 Error June 14, 2025 at 11:07 PM, Khaliun/Ivancsa FA : Solved June 14, 2025 at 11:08 PM, 인제(Hwang) : NC An AGV#4 Repeated Sensor Detection Errors at the Same Location - In front of An 5-3 Full Magazine Outport June 14, 2025 at 11:18 PM, 인제(Hwang) : Please move the plates in the VD An 6-2 chamber to the warehouse June 14, 2025 at 11:26 PM, Shakir (MCS) : Is there any issue with chamber, no UR received June 14, 2025 at 11:32 PM, Selem /Ivancsa FA : Shakir(MCS) CA VD, chambers#43 5-7 are empty. Kindly cancel the AGV command for picking up the goods. Thank you June 14, 2025 at 11:37 PM, Shakir (MCS) : Job cancelled June 14, 2025 at 11:38 PM, Khaliun/Ivancsa FA : @MCS VD CA AGV#7 #6 check pls June 14, 2025 at 11:47 PM, Jun(정우준)_SKOH FA : @Shakir (MCS) can you send c0vgvc01_vc07 to C1STKC72?? June 14, 2025 at 11:48 PM, Shakir (MCS) : Now AGV06 job initiated and started to move June 14, 2025 at 11:51 PM, Shakir (MCS) : Job initiated but AGV under alarm @Selem /Ivancsa FA plz check June 14, 2025 at 11:53 PM, Shakir (MCS) : Now, AGV started to MOVE towards STKC72 Thank you June 15, 2025 at 12:01 AM June 15, 2025 at 12:01 AM, Jun(정우준)_SKOH FA : @assy @인제(Hwang) VD 양극 2-1호기 LD/UD에러 3회 발생으로 AGV가 내려 놓질 못하고있습니다. 해당호기 OOS후 점검 부탁드립니다. June 15, 2025 at 12:11 AM, Khaliun/Ivancsa FA : @MCS VD AN AGV#3 idle pls check June 15, 2025 at 12:27 AM, Jun(정우준)_SKOH FA : @Shakir (MCS) can you send c0vgva01_vc03 to C1STKA72?? June 15, 2025 at 12:27 AM, Jun(정우준)_SKOH FA : @Shakir (MCS) June 15, 2025 at 12:28 AM, Shakir (MCS) : Checking June 15, 2025 at 12:33 AM, Shakir (MCS) : I created command for AGV03 but ACS not responding. June 15, 2025 at 12:42 AM, Shakir (MCS) : Now, AGV03 started to move Thank you June 15, 2025 at 12:43 AM, 인제(Hwang) : NC Ca Robot#1 Error June 15, 2025 at 12:48 AM, Jun(정우준)_SKOH FA : @Shakir (MCS) can you check C2VDA090 LR status? June 15, 2025 at 12:48 AM, Shakir (MCS) : Checking June 15, 2025 at 12:48 AM, Jun(정우준)_SKOH FA : and C1VDC010 too June 15, 2025 at 12:50 AM, Shakir (MCS) : Please press LR for Half chamber June 15, 2025 at 12:53 AM, Shakir (MCS) : UR received and job initiated June 15, 2025 at 12:54 AM, Jun(정우준)_SKOH FA : @인제(Hwang) 금일 12시간동안 VD 양극 3-9 LD/UD 24회 발생했습니다. 해당호기도 OOS후 점검 부탁드립니다! June 15, 2025 at 1:00 AM, Jun(정우준)_SKOH FA : thanks June 15, 2025 at 1:06 AM, 인제(Hwang) : 해당 챔버 LR 확인부탁드립니다 June 15, 2025 at 1:06 AM, Jun(정우준)_SKOH FA : 오타입니다. 음극 3-9호기요. June 15, 2025 at 1:07 AM, 인제(Hwang) : 양극 3-9는 다시 정상가동하겠습니다 June 15, 2025 at 1:07 AM, Jun(정우준)_SKOH FA : 넵 June 15, 2025 at 1:11 AM, Barta Rudi : @FA VD Ca 1-5 #05 AGV7 stopped. It picked up the magazines incorrectly. Please check it. Thank you. June 15, 2025 at 1:13 AM, Barta Rudi : This message was deleted. June 15, 2025 at 1:15 AM, P.Bence A SSL : L1 stacking left side Agv 4 stop please check thank you . June 15, 2025 at 1:20 AM, Jun(정우준)_SKOH FA : solved June 15, 2025 at 1:45 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 there is Runtime Over error Thank you! June 15, 2025 at 1:48 AM, Ivan Chobitko : @mcs Please share available material June 15, 2025 at 1:51 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 32 • Cathode: 102 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 32 • Cathode: 10 GF NC reel Available :- • AN: 13 • CA: 15 ///////////////////////////////////////// VD Unload request .Anode:28 .Cathode:10 Load request .Anode:12 .Cathode: 06 Thank you ! June 15, 2025 at 1:52 AM, Ivan Chobitko : Thank you June 15, 2025 at 2:14 AM, Novák Károly F. A. : Solved June 15, 2025 at 2:18 AM, Barta Rudi : @FA NC CA 5/2 machine is not receiving empty magazines, please check. Thank you. June 15, 2025 at 2:19 AM, Barta Rudi : @Shakir (MCS) The same problem occurs with 2/2 and 3/2 as well. June 15, 2025 at 2:19 AM, Barta Rudi : Cathode June 15, 2025 at 2:19 AM, 인제(Hwang) : NC An AGV#6 Error June 15, 2025 at 2:20 AM, Shakir (MCS) : AGV05 on the way to 5/2 ✅ June 15, 2025 at 2:23 AM, Shakir (MCS) : AGV01: on the way to 3/2 ✅ June 15, 2025 at 2:23 AM, Shakir (MCS) : 2/2 : Materials currently not available at the Gantry O/P ports as soon as material will be available jobs will be created. June 15, 2025 at 2:44 AM, 김현태 : @FA Please send the plates in the VD CA 5-5 chamber to the warehouse June 15, 2025 at 2:54 AM, Barta Rudi : @Shakir (MCS) Agv has not been picking up the finished magazine for a long time at the Cathode 3/3 machine. Please check, thank you June 15, 2025 at 2:57 AM, Shakir (MCS) : Job exist however currently all AGVs are busy. I have increased priority for 3/3. Thank you June 15, 2025 at 3:03 AM, 전 운 (Jeon Woon) : Please recheck June 15, 2025 at 3:05 AM, Jun(정우준)_SKOH FA : done June 15, 2025 at 3:11 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 25 • Cathode: 103 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 17 • Cathode: 00 GF NC reel Available :- • AN: 00 • CA: 22 ///////////////////////////////////////// VD Unload request .Anode:28 .Cathode:06 Load request .Anode:14 .Cathode: 08 Thank you ! June 15, 2025 at 3:13 AM, Barta Rudi : @Shakir (MCS) Agv has not been picking up the finished magazin for a long time at the Cathode 4/3 machine. Please check, thank you June 15, 2025 at 3:16 AM, 전 운 (Jeon Woon) : Thank you! June 15, 2025 at 3:18 AM, Shakir (MCS) : Currently all AGVs are busy. I have increased priority for 4/3. Thank you June 15, 2025 at 3:46 AM, Elena SL : @Shakir (MCS) Agv has not been picking up the finished magazin for a long time at the An 3/2 machine. Please check, thank you June 15, 2025 at 3:48 AM, Shakir (MCS) : 3/2 : AGV05 and AGV04 assigned On the way Thank you June 15, 2025 at 3:54 AM, Elena SL : @Shakir (MCS) Cathode 3/3 same problem 😔 June 15, 2025 at 3:55 AM, Elena SL : +CA 2/3 +CA 4/3 +CA 4/2 June 15, 2025 at 3:59 AM, Shakir (MCS) : 2/3: AGV04 Assigned 4/3: AGV 01 Assigned 4/2: AGV03 assigned On the way Thank you June 15, 2025 at 4:00 AM, Elena SL : @Shakir (MCS) no delivery of empty magazines An 6-1 6-2 6-3 3-1 2-2 3-2 5-3 5-2 5-1 4-1 4-3 1-3 3-3 June 15, 2025 at 4:00 AM, Chinges Fa : VD Anode AGV3 stopped full magazine there is also material in the port check June 15, 2025 at 4:03 AM, Barta Rudi : @Shakir (MCS) Agv has not been picking up the finished magazin for a long time at the CA 3/3 4/3 4/2 machine. Please check, thank you June 15, 2025 at 4:04 AM, 인제(Hwang) : NC An AGV#6 Error June 15, 2025 at 4:09 AM, Shakir (MCS) : 6-2: AGV07 assigned 6-3 : AGV02 assigned 3-1: AGV04 assigned 3-2 :AGV10 assigned 4-3:AGV05 assigned For rest : Materials currently not available at the Gantry O/P ports as soon as material will be available jobs will be created. Thank you June 15, 2025 at 4:10 AM, Elena SL : Thank you ☺️ June 15, 2025 at 4:13 AM, Shakir (MCS) : 3/3: AGV06 assigned 4/3: AGV07 and AGV02 assigned 4/2 : AGV03 assigned On the way Thank you June 15, 2025 at 4:15 AM, 김현태 : NC CA AGV #10 ERROR Thanks June 15, 2025 at 4:16 AM, Shakir (MCS) : 3-6 VD AN full chamber? June 15, 2025 at 4:20 AM, Chinges Fa : Yes sure June 15, 2025 at 4:23 AM, Shakir (MCS) : AGV03 assigned to chamber 3-6 but its rotating for long time, Align SW limit alarm occurred many time. Check the agv. June 15, 2025 at 4:36 AM, Novák Károly F. A. : @Shakir (MCS) Hi. C1CNV072 16144 from mlc3214 plate was removed due to plate failure. The material has been transferred to production. June 15, 2025 at 4:41 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 28 • Cathode: 102 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 13 • Cathode: 10 GF NC reel Available :- • AN: 01 • CA: 37 ///////////////////////////////////////// VD Unload request .Anode:20 .Cathode:02 Load request .Anode:14 .Cathode: 08 Thank you ! June 15, 2025 at 5:30 AM, Selem /Ivancsa FA : Shakir (MCS) The door of Dryer 3-6 is closed. Please cancel AGV#03 job. June 15, 2025 at 5:30 AM, Shakir (MCS) : Checking June 15, 2025 at 5:32 AM, Shakir (MCS) : Job cancelled ✅ Thanks June 15, 2025 at 5:47 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.15 Time: 06:00~ 18:00 1.Elec 최기수(Choi gisu) 2.Assy 이민재(Lee minjae) June 15, 2025 at 6:10 AM, Baek Hojong(백호종)FA : dayshift Schedule Date: 2025.06.15 Time: 06:00~ 18:00 1.백호종PM Baek Hojong 2.Elec 최기수(Choi gisu) 3.Assy 이민재(Lee minjae) June 15, 2025 at 6:22 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Skwarek Tibor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(2) Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 15, 2025 at 7:04 AM, Dariimaa/다리마/Ivancsa : @MCS good morning VD AN AGV#3 idle. Please check. Thank you! June 15, 2025 at 7:13 AM, duzzaman Md (MCS) : Job was terminated earlier at 05:32. Sending it back to stk. Thank you June 15, 2025 at 7:15 AM, 이민재 : @MCS Please let me know the returnable material June 15, 2025 at 7:17 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 45 • Cathode: 117 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode: 05 GF NC reel Available :- • AN: 04 • CA: 32 ///////////////////////////////////////// VD Unload request .Anode:11 .Cathode:16 Load request .Anode:04 .Cathode: 06 Thank you ! June 15, 2025 at 8:17 AM, Hữu Thắng : @FA NC CA Robot#3 Stopped . Could u please check it . thanks June 15, 2025 at 8:18 AM, Lajos Gábor F.A. : Done June 15, 2025 at 8:19 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot June 15, 2025 at 8:22 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 53 • Cathode: 125 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 04 • Cathode: 05 GF NC reel Available :- • AN: 00 • CA: 31 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode:30 Load request .Anode:02 .Cathode: 04 Thank you ! June 15, 2025 at 8:28 AM, KIM SEYEON [김세연]_FA : @Dear Assembly shift leader. please check VD UR by operator. anode ur is too low. June 15, 2025 at 8:31 AM, Kateryna SSL C : @QuangPhan June 15, 2025 at 8:32 AM, QuangPhan : 네, checking June 15, 2025 at 8:47 AM, QuangPhan : Hello! @FA @AGV @duzzaman Md (MCS) VD 1-1 #01 VD 2-7 #16 VD2-9 #18 VD4-6 #33 VD4-7 #34 VD4-8 #35 VD4-9 #36 VD 5-9 #45 UR press has been performed but AGV does not execute. Please check. June 15, 2025 at 8:47 AM, QuangPhan : Anode June 15, 2025 at 8:58 AM, duzzaman Md (MCS) : AN VD 1/1: P01, P02 is on vehicle. P03,P04 AGV got assigned/unassigned several times. ACS issue 2/7: UR suceessful, Job created. Will be delivered when suitable auto port is available . 2/9: No UR 4/6: No UR 4/7: All good from MCS. Vehicle departed Checking more June 15, 2025 at 8:58 AM, 배병민 (Bae Byoungmin) : VD 1-1 VD 2-9 VD 4-6 VD 5-9 UR command was not generated in the corresponding VD. Please check again. June 15, 2025 at 9:03 AM, duzzaman Md (MCS) : 4/8: Have job, vehicle getting assigned unassigned. ACS issue. 4/9: Has active job. Will be delivered whene there is Suitable auto port 5/9: No UR Thank you June 15, 2025 at 9:48 AM, Pavel : @FA Good morning everyone! please share the latest update on the amount of material Thank you June 15, 2025 at 9:50 AM, Kertész Dániel : Good morning! @duzzaman Md (MCS) please can you check this? Thank you! June 15, 2025 at 9:52 AM, Yaroslav SL/C 6 line : @mcs Please share available lot. Thanks June 15, 2025 at 9:59 AM, Kertész Dániel : @duzzaman Md (MCS) please can you check the location of the MLA0160? June 15, 2025 at 10:02 AM, duzzaman Md (MCS) : A moment please June 15, 2025 at 10:05 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 68 • Cathode: 136 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 06 • Cathode: 00 GF NC reel Available :- • AN: 11 • CA: 50 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode:14 Load request .Anode:06 .Cathode: 08 Thank you ! June 15, 2025 at 10:06 AM, duzzaman Md (MCS) : Curent location C1STKA72 0205802 June 15, 2025 at 10:06 AM, Kertész Dániel : Thank you! June 15, 2025 at 10:21 AM, Kertész Dániel : @duzzaman Md (MCS) In the ACS on the C6STM080_P01 port has the same carrier ID, and because of this it has an "UR carrier location mismatch" error. Physically on this port there is the MLA1233, and the MLA0160 is now located at the C1STKA72_M02 port. Could you change the ID on the C6STM080_P01 from MLA0160 to MLA1233? June 15, 2025 at 10:26 AM, duzzaman Md (MCS) : Done June 15, 2025 at 10:39 AM, 이민재 : VD 챔버 3-6 P03,04 - LU/UD REQ 알람 5회 이상 발생하여 AGV가 화물 적재하지 못하고 있습니다 해당호기 OOS 후 점검부탁드립니다 June 15, 2025 at 10:41 AM, 이민재 : An June 15, 2025 at 11:16 AM, Hữu Thắng : @FA NC CA Line 3/2 AGV#1 error while unloading full magazine . Can you please come here to check it June 15, 2025 at 11:22 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 67 • Cathode: 124 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 06 • Cathode: 03 GF NC reel Available :- • AN: 05 • CA: 37 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 23 Load request .Anode:06 .Cathode: 06 Thank you ! June 15, 2025 at 11:30 AM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 피엠님 LD UD 알람 발생 VD는 저희가 반송잡 안가게 막겠습니다. 명일 한국진공 IO체크 부탁드립니다. 저희 CS팀도 같이 점검하겠습니다. June 15, 2025 at 11:30 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please make VD AN 3-6 have no transfer job. We cannot use it without equipment check. June 15, 2025 at 11:30 AM, Lee Junghan(이정한)_CS : Sovled June 15, 2025 at 11:32 AM, duzzaman Md (MCS) : Job has been deleted. Thank you June 15, 2025 at 12:28 PM, Hữu Thắng : Same problem .Can you plz check it . Thank you June 15, 2025 at 12:28 PM, duzzaman Md (MCS) : @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01 Thank you ! June 15, 2025 at 1:03 PM, QuangPhan : This message was deleted. June 15, 2025 at 1:26 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 79 • Cathode: 144 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 02 • Cathode: 00 GF NC reel Available :- • AN: 12 • CA: 41 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 14 Load request .Anode:04 .Cathode: 04 Thank you ! June 15, 2025 at 2:31 PM, Hữu Thắng : @FA NC CA AGV#3 alarm . Plz check . thanks June 15, 2025 at 2:35 PM, Hữu Thắng : @GA NC CA Line 1/1 Input C/V 01 Error . Magazine is not moving . Can you check it please June 15, 2025 at 2:57 PM, Hữu Thắng : The problem occurred . Spane 101FAN02 Error . could you please recheck June 15, 2025 at 3:04 PM, QuangPhan : @FA NC AN AGV #4 error. Thanks June 15, 2025 at 3:06 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 85 • Cathode: 159 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode: 00 GF NC reel Available :- • AN: 09 • CA: 34 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 06 Load request .Anode:06 .Cathode: 06 Thank you ! June 15, 2025 at 3:09 PM, 원재 : @FA NC AN AGV STOP #4 Check please June 15, 2025 at 3:10 PM, Dariimaa/다리마/Ivancsa : @Ankhaa/Ivancsa FA @Nandia FA @Tuya Ivancsa FA @Natsag/ Ivansca FA pls check June 15, 2025 at 3:17 PM, Hữu Thắng : @FA VD CA Line 2/5 2 plates is wrong position . Can you please check it . Thank you June 15, 2025 at 3:18 PM, Hữu Thắng : @MCS Could you please check UR VD CA 2/1 June 15, 2025 at 3:20 PM, duzzaman Md (MCS) : Ports are OOS. no UR. Last job was terminated at 14:41 June 15, 2025 at 3:21 PM, duzzaman Md (MCS) : @FA please check E0STKC52_C01 Load oversize right error Thank you June 15, 2025 at 3:23 PM, Hữu Thắng : This message was deleted. June 15, 2025 at 3:24 PM, Natsag/ Ivansca FA : Sovled June 15, 2025 at 3:32 PM, Hữu Thắng : @MCS @FA Could you please transfer those magazines in VD CA Line 2/1 to KC72 please . Someone delete information in chamber that why is OOS . Thank you June 15, 2025 at 3:33 PM, QuangPhan : @FA NC CA AGV #5 error. Thanks June 15, 2025 at 3:34 PM, duzzaman Md (MCS) : Please make it in service and then from MCS we can send June 15, 2025 at 3:45 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) I found some full magazines but it cannot be sent to stack station. what rule make it out of material? June 15, 2025 at 3:45 PM, duzzaman Md (MCS) : Checking June 15, 2025 at 3:45 PM, KIM SEYEON [김세연]_FA : magazine humidity inspection? June 15, 2025 at 3:47 PM, duzzaman Md (MCS) : Most of them are because of LOT count June 15, 2025 at 3:48 PM, duzzaman Md (MCS) : For example , Anode materials 125 to 119 What_next_filter_isHold 119 to 36 What_next_filter_magazine_lot_cnt 36 to 1 What_next_fiilter_stk_full_in_command 1 to 0 What_next_filter_RTD_hold June 15, 2025 at 3:51 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 83 • Cathode: 168 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking 0 • Anode: 00 • Cathode: 00 GF NC reel Available :- • AN: 16 • CA: 51 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 00 Load request .Anode:00 .Cathode: 02 Thank you ! June 15, 2025 at 3:55 PM, Baek Hojong(백호종)FA : @duzzaman Md (MCS) MLA6186 MLA4059 The reason why automatic return is not possible is June 15, 2025 at 3:58 PM, duzzaman Md (MCS) : Everything seems okay fir MLA6186, currently at CNV072_P01 DESTINATION C4STM200_P01 MCS side is okay. Checking another one June 15, 2025 at 4:01 PM, duzzaman Md (MCS) : MLA4059 is also just arrived at its destination at 15:56 Located at C1STM060_P01 June 15, 2025 at 4:01 PM, duzzaman Md (MCS) : This message was deleted. June 15, 2025 at 4:03 PM, duzzaman Md (MCS) : Transport completed for both June 15, 2025 at 4:37 PM, Dima Kusyk : @fa @mcs Please check storage STK Lines 4-6. Thank you June 15, 2025 at 4:45 PM, duzzaman Md (MCS) : Everything seems fine. Last job was completed at 15;55 After that no UR/LR Thank you. June 15, 2025 at 5:07 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot June 15, 2025 at 5:09 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 82 • Cathode: 163 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking 0 • Anode: 00 • Cathode: 04 GF NC reel Available :- • AN: 32 • CA: 48 ///////////////////////////////////////// VD Unload request .Anode: 13 .Cathode: 10 Load request .Anode:06 .Cathode: 04 Thank you ! June 15, 2025 at 5:57 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (0):- Sick (0):- Holiday (2): Kiss Balázs, Zsurbej Zsolt Shift change(0): Elektróda:(2) Szabadi Miklós, Oláh András Assembly(5): GF: Novák Károly, Kasztel Balázs 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Magyar Balázs, Martina Dávid June 15, 2025 at 5:58 PM, 김정희(Jeong hee FA) : dayshift FA "A" Schedule Date: 2025.06.15 Time:1800~06:00 전극 - GF 최명운 (CHOI Myoungwoon) GF 김정희 (Kim jeong hul) June 15, 2025 at 6:04 PM, Mohammad Amir : @Novák Károly F. A. Please check E0STKA52_C02 there is MCP AP error. Thank you very much! June 15, 2025 at 6:06 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0CNC52_M04 there is a job to deliver reels however RTV can't deliver. Please check the port M04 , because of this RTV is busy and Reels delivery has stopped. Thank you very much! June 15, 2025 at 6:09 PM, Mohammad Amir : Good evening @All GF Next lot quantity available Pre STK > Notching • Anode: 74 • Cathode: 166 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 12 • Cathode: 00 GF NC reel Available :- • AN: 42 • CA: 67 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 10 Load request .Anode:00 .Cathode: 04 Thank you ! June 15, 2025 at 6:37 PM, Novák Károly F. A. : Solved June 15, 2025 at 6:38 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 6:38 PM, Jun(정우준)_SKOH FA : Night shift FA Schedule Date: 2025.06.15 Time: 18:00~06:00 1. Jeong WooJun PM 정우준 2. GF 최명운(CHOI Myoungwoon) 3. GF 김정희(Kim jeong hul) June 15, 2025 at 6:40 PM, 전 운 (Jeon Woon) : @FA @MCS We have converted 2,3 Line Stack Station to the manual to prevent AGV from bringing Ca due to Ca shortage, please note. June 15, 2025 at 6:41 PM, Mohammad Amir : Good evening, Thank you very much for the information. Well noted ✅. Thank you very much! June 15, 2025 at 7:15 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKA71_P15/16 there is light curtain error and it is blocking materials delivery to VD AN 2-7. Thank you very much! June 15, 2025 at 7:17 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKC71_P12 there is INV-01 Run time Over error and it is slowing down empty magazine delivery. Check the issue on priority. Thank you very much! June 15, 2025 at 7:19 PM, Novák Károly F. A. : Solved June 15, 2025 at 7:19 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 7:20 PM, Novák Károly F. A. : Checking June 15, 2025 at 7:28 PM, Novák Károly F. A. : @Mohammad Amir June 15, 2025 at 7:28 PM, Novák Károly F. A. : Hi. Does the MCS say there is material on C1STM170 P01? June 15, 2025 at 7:30 PM, Mohammad Amir : Sure ,Checking. June 15, 2025 at 7:31 PM, Mohammad Amir : Good evening, According to MCS and RTD, Currently there is MLC5659 located at C1STM170_P01. Please confirm is this carrier physically exists there ? Thank you very much! June 15, 2025 at 7:31 PM, Lan Nhi : @FA Hello. Please check for me agv #3 NC/Ca error in inline. Thanks June 15, 2025 at 7:49 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 63 • Cathode: 152 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 04 • Cathode: 07 GF NC reel Available :- • AN: 37 • CA: 61 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 08 Load request .Anode:08 .Cathode: 02 Thank you ! June 15, 2025 at 7:53 PM, Novák Károly F. A. : Yes this plate is here June 15, 2025 at 7:53 PM, Mohammad Amir : Thank you very much for the confirmation. June 15, 2025 at 8:06 PM, Mohammad Amir : @Novák Károly F. A. Please check E0CNVC52_RTV01 is in Manual mode hence OOS and because of this issue CA reels delivery has stopped. Thank you very much! June 15, 2025 at 8:22 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C02 there is MCP AP Auto Manual mode error. Thank you! June 15, 2025 at 8:22 PM, 카스텔 발라지 F.A. : Working on it June 15, 2025 at 8:32 PM, Mohammad Amir : @FA @Novák Károly F. A. @Khaliun/Ivancsa FA Please check MLC3050 located at C1CNV072_P16,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! June 15, 2025 at 8:45 PM, 카스텔 발라지 F.A. : Solved June 15, 2025 at 8:45 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 8:46 PM, Jun(정우준)_SKOH FA : @Mohammad Amir can you check GF available lot? June 15, 2025 at 8:47 PM, Mohammad Amir : Good evening Sir, Sure Sir, checking. Thank you very much! June 15, 2025 at 8:49 PM, Mohammad Amir : Dear @Jun(정우준)_SKOH FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 48 • Cathode: 125 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 28 • Cathode: 02 GF NC reel Available :- • AN: 27 • CA: 25 ///////////////////////////////////////// VD Unload request .Anode: 14 .Cathode: 02 Load request .Anode:10 .Cathode: 06 Thank you ! June 15, 2025 at 8:50 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot every 1 hour. June 15, 2025 at 8:51 PM, KIM SEYEON [김세연]_FA : from now on June 15, 2025 at 8:51 PM, Mohammad Amir : Dear Sir, Sure,I will share every hour. Thank you very much! June 15, 2025 at 8:53 PM, KIM SEYEON [김세연]_FA : thanks a lot June 15, 2025 at 8:54 PM, Mohammad Amir : You are most welcome,Sir. June 15, 2025 at 9:03 PM, Mohammad Amir : @Manufacturing Please confirm with me are you producing NC AN 3-2 ? It is I/P ports are currently OOS and because of this Empty magazine delivery job has been pending for almost 1 hour. Thank you very much! June 15, 2025 at 9:05 PM, Jun(정우준)_SKOH FA : we will provide Empty magazine by a hand cart. June 15, 2025 at 9:07 PM, Mohammad Amir : Dear Sir, Thank you very much for the confirmation ,in this case ,I am cancelling the automatic job so this magazine can be used in other line. June 15, 2025 at 9:08 PM, Jun(정우준)_SKOH FA : thanks! June 15, 2025 at 9:08 PM, Mohammad Amir : You are most welcome! June 15, 2025 at 9:09 PM, 카스텔 발라지 F.A. : NC CA & AN 1-2 1-3 2-1 2-2 2-3 3-1 3-2 3-3 These machines are loaded manually, right? June 15, 2025 at 9:10 PM, Dániel Hufnágel : Egy pillanat és írom June 15, 2025 at 9:10 PM, Mohammad Amir : Update :- Issue has been resolved ✅. Now the empty magazine has successfully assigned to NC AN 4-2 and AGV#9 on the way with empty magazine. Thank you very much! June 15, 2025 at 9:10 PM, Jun(정우준)_SKOH FA : yes thanks June 15, 2025 at 9:13 PM, Dániel Hufnágel : Igen June 15, 2025 at 9:18 PM, Mohammad Amir : @FA @Novák Károly F. A. @Khaliun/Ivancsa FA Please check MLA4149 located at C1STKA71_P21,it is not moving and blocking reecovery of materials and eventually there is a traffic of materials on recovery CNV. Everything is good from MCS RTD side ✅. Please check physically,is pallet position is correct. Thank you very much! June 15, 2025 at 9:22 PM, Novák Károly F. A. : @Mohammad Amir Gf nc robot 2 removed MLC2036 due to plate error. June 15, 2025 at 9:22 PM, Mohammad Amir : Information has been updated successfully in MCS and RTD side ✅. Thank you very much! June 15, 2025 at 9:32 PM, Novák Károly F. A. : Checking June 15, 2025 at 9:46 PM, Novák Károly F. A. : Currently on C1STKA71_P21 is MLA1047. The port is working correctly. June 15, 2025 at 9:48 PM, Mohammad Amir : Thank you very much! MLA4149 was waiting at C1STKA71_P21 from 21:05 till 21:21 and because of this issue there was traffic on the recovery CNV and it filled with recovery materials. June 15, 2025 at 9:56 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 26 • Cathode: 125 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 28 • Cathode: 00 GF NC reel Available :- • AN: 09 • CA: 79 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 10 Load request .Anode:12 .Cathode: 04 Thank you ! June 15, 2025 at 10:13 PM, 김현태 : NC AN AGV #4 error Thanks you June 15, 2025 at 10:15 PM, Novák Károly F. A. : Checking June 15, 2025 at 10:18 PM, Jun(정우준)_SKOH FA : Does VD LR count mean transfer jobs that have already been assigned? June 15, 2025 at 10:19 PM, Mohammad Amir : Yes Sir,it means jobs have been assigned from Pre VD STK to VD machines. Thank you very much! June 15, 2025 at 10:19 PM, Novák Károly F. A. : Agv 4 moves again. June 15, 2025 at 10:22 PM, Jun(정우준)_SKOH FA : Then, we also need to count the LR that has not been assigned yet. June 15, 2025 at 10:26 PM, Elena SL : Hello all. Please check st conveyor mismatch error. And AGV #6#8#7 near line 5 ST. Please help June 15, 2025 at 10:29 PM, Elena SL : @FA June 15, 2025 at 11:06 PM, Elena SL : @Mohammad Amir NC CA don’t pick up full mgz 4/3 4/2 1/2 1/3 6/2 6/3 2/2 2/1 Please check and help Thank you June 15, 2025 at 11:07 PM, Mohammad Amir : Sure , Checking. June 15, 2025 at 11:09 PM, Elena SL : @Mohammad Amir RTW lift NC CA error [CV15] tray abnormal error 01 June 15, 2025 at 11:09 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check this issue. Thank you very much! June 15, 2025 at 11:09 PM, 카스텔 발라지 F.A. : Working on it June 15, 2025 at 11:16 PM, Mohammad Amir : Dear @Jun(정우준)_SKOH FA GF Next lot quantity available Pre STK > Notching • Anode: 13 • Cathode: 109 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 03 • Cathode:02 GF NC reel Available :- • AN: 39 • CA: 17 ///////////////////////////////////////// VD Unload request .Anode: 03 .Cathode: 10 Load request(Exist Jobs) .Anode:04 .Cathode: 04 Load request waiting for materials:- Anode:-48 Cathode:-76 Thank you ! June 15, 2025 at 11:17 PM, Jun(정우준)_SKOH FA : Thx June 15, 2025 at 11:17 PM, Mohammad Amir : You are welcome Sir, Let me know if you need any more information regarding Load requests. June 15, 2025 at 11:19 PM, Lan Nhi : @MCS Hello. Please help me remove the remaining pallets of machine 5-8(#44) VD/Ca. Thanks. June 15, 2025 at 11:22 PM, Mohammad Amir : Job has been created successfully to travel the remaining materials to Post VD STK ✅. Thank you very much! June 15, 2025 at 11:25 PM, Lan Nhi : Thank you June 15, 2025 at 11:25 PM, Mohammad Amir : Issue has been resolved ✅ For 6-2 AGV#4 has Assigned. 1-1 AGV#1 has assigned. 6-3 AGV#8 has assigned. For other Jobs have also created however all AGVs are currently busy. Thank you very much! June 15, 2025 at 11:25 PM, Mohammad Amir : You are welcome! June 15, 2025 at 11:28 PM, Elena SL : Thank you for feedback June 15, 2025 at 11:31 PM, Mohammad Amir : You are welcome! June 15, 2025 at 11:39 PM, Mohammad Amir : Update:- VD CA 5-8 have been unloaded successfully ✅. Thank you very much! June 15, 2025 at 11:43 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C01 there is Fork#2 Load Position Error when Active. Thank you very much! June 15, 2025 at 11:45 PM, 카스텔 발라지 F.A. : Solved June 15, 2025 at 11:46 PM, Mohammad Amir : Köszönom szepen 🙏 June 15, 2025 at 11:59 PM, Elena SL : @Mohammad Amir ca NC don’t pick up full mgz 6-1 6-1 2-1 June 15, 2025 at 11:59 PM, Mohammad Amir : Checking June 15, 2025 at 11:59 PM, Elena SL : Sorry 6/1 6/3 2/1 June 16, 2025 at 12:02 AM June 16, 2025 at 12:02 AM, Elena SL : @Mohammad Amir An sides NC 2/1 3/3 FULL also without sending. June 16, 2025 at 12:03 AM, Mohammad Amir : Issue has been resolved for 2-1 and 6-3 . ✅ AGV#1 bas assigned to 6-3. For 2-1 currently waiting for the AGV as all AGVs are busy. Checking for 6-1. Thank you very much! June 16, 2025 at 12:05 AM, Mohammad Amir : For 6-1 NC CA, Please press UR . Thank you very much! June 16, 2025 at 12:07 AM, Mohammad Amir : For NC AN 2-1, Job has been created successfully and AGV#1 has assigned ✅ And for 3-3, AGV#5 has assigned successfully as well. Thank you! June 16, 2025 at 12:08 AM, Elena SL : Good 😮‍💨 June 16, 2025 at 12:11 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 87 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 52 • Cathode:30 GF NC reel Available :- • AN: 04 • CA: 72 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 14 Load request(Exist Jobs) .Anode:08 .Cathode: 04 Load request waiting for materials:- Anode:-44 Cathode:-72 Thank you ! June 16, 2025 at 12:14 AM, Elena SL : @Mohammad Amir ca 6/3 steel full 😣 June 16, 2025 at 12:19 AM, Mohammad Amir : AGV#1 has been assigned to deliver empty magazine. Please wait a little as all AGVs are busy ,I have provided 6-3 priority so as soon as AGV will be free it will assign to it. Thank you very much! June 16, 2025 at 12:23 AM, Elena SL : @Mohammad Amir @FA AGV #10 Nc ca fork wrong position June 16, 2025 at 12:23 AM, Mohammad Amir : @FA Please check this. Thank you! June 16, 2025 at 12:37 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. @Dániel Hufnágel Is there maintainance still going on C1CNV072 ? It is still OOS and because of this several jobs are pending. Please check. Thank you very much! June 16, 2025 at 12:44 AM, Dániel Hufnágel : Its working June 16, 2025 at 12:47 AM, Mohammad Amir : It is still not working fully. For example:- C1CNV072_P01/P02/P10/P21/P22 Ans there are several other ports which are still Out of service and because of this several jobs are pending and it keeps the AGVs busy. Please check this soon there will be shortages of Stacking materials. Thank you very much! June 16, 2025 at 12:53 AM, Novák Károly F. A. : Checking June 16, 2025 at 12:54 AM, Zsolt F.A. : In CCS everything operates fine. MCS however is colored grey June 16, 2025 at 12:55 AM, Dániel Hufnágel : @Mohammad Amir line#2 stacking production start at 1:00 o'clock June 16, 2025 at 12:58 AM, 전 운 (Jeon Woon) : @MCS requesting UR at many stacking stations on line 4, but the AGV doesn't seem to come. Please check June 16, 2025 at 1:00 AM, Mohammad Amir : For example C1CNV072_P10 port as it is OOS that's why no carrier came to this port and almost five jobs are pending just for this one ports. Similar situation exists for P01/P02/P11/P12/P26/P29/P30 ,we need to receive In-service status from Equipment side. And all these ports are OOS and that's why UR is not progressing. And several jobs are waiting. Thank you very much! June 16, 2025 at 1:01 AM, Mohammad Amir : @전 운 (Jeon Woon) Sir, Because of this issue UR is not progressing. Thank you very much! June 16, 2025 at 1:02 AM, Mohammad Amir : @Jun(정우준)_SKOH FA Dear Sir, Could you please check this issue,it is causing delay in production. Thank you very much! June 16, 2025 at 1:04 AM, 카스텔 발라지 F.A. : We already working on it ✅ June 16, 2025 at 1:05 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 75 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 47 • Cathode:23 GF NC reel Available :- • AN: 01 • CA: 88 ///////////////////////////////////////// VD Unload request .Anode: 15 .Cathode: 02 Load request(Exist Jobs) .Anode:04 .Cathode: 02 Load request waiting for materials:- Anode:-40 Cathode:-72 Thank you ! June 16, 2025 at 1:12 AM, Dániel Hufnágel : We are here and working, sorry for the late answer June 16, 2025 at 1:12 AM, Mohammad Amir : It is okay, Köszönom szepen 🙏. June 16, 2025 at 1:16 AM, Dániel Hufnágel : Now its lookin good June 16, 2025 at 1:17 AM, Mohammad Amir : This message was deleted. June 16, 2025 at 1:17 AM, Mohammad Amir : Now operation has been back to normal. ✅ I am monitoring. Thank you very much! June 16, 2025 at 1:18 AM, Mohammad Amir : Dear Sir, For your information, Issue has been resolved ✅. UR will start to progress. Thank you very much! June 16, 2025 at 1:29 AM, 전 운 (Jeon Woon) : Please re check. line 4 AGV does not do UR June 16, 2025 at 1:30 AM, Mohammad Amir : Checking. June 16, 2025 at 1:32 AM, Mohammad Amir : Sir, UR received successfully ✅ AGV#2 has picked the materials from 4-8 as well. Because of CNV072 issue there is a lot of jobs and currently all AGVs are busy in performing other UR and LR jobs because of this you are witnessing delay. I am monitoring. Thank you very much! June 16, 2025 at 1:41 AM, Lan Nhi : @FA Hello. Plz check for me agv #4 and agv#1 error in line1&2 NC/Ca. Thanks June 16, 2025 at 1:48 AM, 카스텔 발라지 F.A. : Checking June 16, 2025 at 1:50 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKC71_C02 there is More than a combination of lifting and lowering sensor error and it is blocking materials recovery. Thank you very much! June 16, 2025 at 1:52 AM, Anastasiia : Hello! AGV 8 brought the cathode magazine, then picked it up and took it back. C1CNV072_P25 June 16, 2025 at 1:53 AM, Elena SL : @Mohammad Amir nc ca don’t pick up full mgz 6/3 3/1 3/3 4/2 4/1 June 16, 2025 at 1:54 AM, Mohammad Amir : Sure,Checking. June 16, 2025 at 1:57 AM, Mohammad Amir : Jobs have been created successfully from all machines to transfer Full Magazine to the Warehouse. ✅ AGV#7 has picked from 3-3 and AGV#5 has picked from 4-1. Other machines are currently waiting for the AGVs ,I am monitoring. Thank you very much! June 16, 2025 at 1:59 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+4 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 16, 2025 at 2:03 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 73 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 43 • Cathode:17 GF NC reel Available :- • AN: 00 • CA: 72 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 06 Load request(Exist Jobs) .Anode:06 .Cathode: 12 Load request waiting for materials:- Anode:-40 Cathode:-60 Thank you ! June 16, 2025 at 2:12 AM, 카스텔 발라지 F.A. : @Mohammad Amir Can you please check LTC0417 transfer history? Thank you very much! June 16, 2025 at 2:14 AM, Mohammad Amir : Sure, checking! June 16, 2025 at 2:19 AM, Mohammad Amir : Latest history of LTC0417:- Job was created from E0STKC52_Z01 to E0CNVC52_M10 at 1:18. Job completed at 1:47 and LTC0417 reached at M10. At 2:03 job created from E0CNVC52_M10 to E0CNVC51_P07. Currently carrier is moving and at E0CNVC51_08_062 at 2:18. Please let me know if you need more information. Thank you very much! June 16, 2025 at 2:31 AM, Elena SL : @Mohammad Amir NC AN don’t have empty mgz June 16, 2025 at 2:32 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please confirm,Is there again maintenance on C1CNV072? Stacking materials delivery has disrupted. Thank you very much! June 16, 2025 at 2:32 AM, Mohammad Amir : Checking. June 16, 2025 at 2:33 AM, Mohammad Amir : Unfortunately we don't have any AN empty magazine available in warehouse. That's why you are witnessing shortages. Thank you very much! June 16, 2025 at 2:35 AM, Elena SL : Is there a problem with delivering empty magazines from the stacking area to the warehouse? June 16, 2025 at 2:37 AM, Mohammad Amir : There is issue with the CNV that's why you might witness delay. Thank you! June 16, 2025 at 2:37 AM, Elena SL : @Mohammad Amir nc a don’t pick up full mgz. 2/2 3/2 5/3 5/2 Please check June 16, 2025 at 2:38 AM, Mohammad Amir : @카스텔 발라지 F.A. Please check C1CNV072_16_341 there is INV-01 Run time Over error and it is blocking stacking materials delivery. Thank you very much! June 16, 2025 at 2:38 AM, Elena SL : Anode *** June 16, 2025 at 2:38 AM, Mohammad Amir : Sure,checking. June 16, 2025 at 2:42 AM, Mohammad Amir : Jobs have been created from all the mentioned machines successfully ✅. For 5-3 NC AN,AGV#8 has assigned. Currently there is 7 AGVs available for transfer and all are busy that's why you are witnessing delay. I have increased the priority for this machines so as soon as AGVs will be free it will assign to these. Thank you very much! June 16, 2025 at 2:42 AM, Elena SL : @Mohammad Amir nc Ca don’t pick up full mgz 3/1 2/1 1/3 3/3 4/3 4/2 4/1 Check please June 16, 2025 at 2:42 AM, Mohammad Amir : Sure,Checking. June 16, 2025 at 2:45 AM, Mohammad Amir : Jobs have been created from all the mentioned machines successfully ✅. For 3-1 NC CA,AGV#3 has assigned. For 2-1 AGV#2 has assigned. Currently all AGVs re busy that's why you are witnessing delay. I am monitoring. Thank you very much! June 16, 2025 at 2:46 AM, Mohammad Amir : @FA @Khaliun/Ivancsa FA @Novák Károly F. A. Please check NC CA AGV#4 it is in Error and it is blocking other AGVs resulting in delay in empty magazine delivery and full magazine pick up. Thank you very much! June 16, 2025 at 2:47 AM, Dániel Hufnágel : They at 1F June 16, 2025 at 2:47 AM, Dániel Hufnágel : Are"" June 16, 2025 at 2:53 AM, 양원석 : @Fa NC CA Agv #4, 1 error plz check June 16, 2025 at 3:02 AM, Elena SL : @Mohammad Amir NC AN MC : 5/2 5/3 3/2 3/1 2/2 2/1 1/3 6/3 1/2 1/1 2/3 3/3 4/3 4/2 4/1 3/1 6/3 Waiting empty mgz 😢 June 16, 2025 at 3:07 AM, Mohammad Amir : We have LR from these machines however currently there is no empty magazine available in warehouse. That's why you are witnessing delay. However process is normal. For example as soon as Empty magazine available on the Gantry O/P it goes to NC AN. Currently AGV#10 will deliver empty magazine to 5-2 NC AN. ✅ AGV#9 will deliver to 4-2. ✅ Thank you very much! June 16, 2025 at 3:11 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 54 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 39 • Cathode:09 GF NC reel Available :- • AN: 15 • CA: 52 ///////////////////////////////////////// VD Unload request .Anode: 32 .Cathode: 24 Load request(Exist Jobs) .Anode:14 .Cathode: 10 Load request waiting for materials:- Anode:-24 Cathode:-52 Thank you ! June 16, 2025 at 3:11 AM, Mohammad Amir : @Elena SL For your information Thank you very much! June 16, 2025 at 3:12 AM, Elena SL : Thank you June 16, 2025 at 3:12 AM, Mohammad Amir : You are welcome! June 16, 2025 at 3:35 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKC71_C01 there is Light curtain error . Thank you! June 16, 2025 at 3:41 AM, Jun(정우준)_SKOH FA : solved June 16, 2025 at 3:41 AM, Mohammad Amir : Thank you very much Sir. June 16, 2025 at 3:43 AM, Jun(정우준)_SKOH FA : @Mohammad Amir plz send C0SGV001_VC04 TO C1CNV072_P05 June 16, 2025 at 3:43 AM, Mohammad Amir : Sure Sir, checking. June 16, 2025 at 3:45 AM, Mohammad Amir : Sir, Job has been created successfully ✅. AGV#4 has started to move. Thank you! June 16, 2025 at 3:47 AM, Mohammad Amir : @FA Please check C1STKC71_C01 there is Load oversize error. Thank you! June 16, 2025 at 3:47 AM, Mohammad Amir : C02** June 16, 2025 at 3:54 AM, Jun(정우준)_SKOH FA : thank you June 16, 2025 at 3:54 AM, Mohammad Amir : You are welcome,Sir! June 16, 2025 at 4:01 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 50 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 53 • Cathode:10 GF NC reel Available :- • AN: 25 • CA: 59 ///////////////////////////////////////// VD Unload request .Anode: 25 .Cathode: 18 Load request(Exist Jobs) .Anode:04 .Cathode: 10 Load request waiting for materials:- Anode:-36 Cathode:-48 Thank you ! June 16, 2025 at 4:26 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16_141 there is INV-01 Run time Over error and it is blocking stacking materials delivery. Thank you very much! June 16, 2025 at 4:35 AM, Mohammad Amir : @FA @Dániel Hufnágel Please check C1CNV072_P15 there is Data Loss error and because of this stacking materials delivery has stopped please take action on priority. Thank you very much! June 16, 2025 at 5:01 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 39 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 62 • Cathode:11 GF NC reel Available :- • AN: 25 • CA: 51 ///////////////////////////////////////// VD Unload request .Anode: 30 .Cathode: 16 Load request(Exist Jobs) .Anode:06 .Cathode: 16 Load request waiting for materials:- Anode:-52 Cathode:-52 Thank you ! June 16, 2025 at 5:09 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check MLC4159 ocated at C1CNV072_16_097,it is not moving and blocking satcking materials delivery. Everything is good from MCS RTD side ✅. Please check physically on priority. Thank you very much! June 16, 2025 at 5:12 AM, 카스텔 발라지 F.A. : Solved June 16, 2025 at 5:12 AM, Mohammad Amir : Köszönom szepen 🙏 June 16, 2025 at 5:29 AM, Mohammad Amir : @FA @N.Zoli F.A. Please check E0CNVC52_RTV01 there is Run time Over error and reels delivery has stopped. Thank you very much! June 16, 2025 at 6:09 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(3): Magyar Imre Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 16, 2025 at 6:28 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 there is Runtime Over error Thank you! June 16, 2025 at 6:30 AM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it. Thank you June 16, 2025 at 7:15 AM, KIM SEYEON [김세연]_FA : @Shakir (MCS) please share available lot June 16, 2025 at 7:15 AM, Shakir (MCS) : Checking June 16, 2025 at 7:19 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 57 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 66 • Cathode:13 GF NC reel Available :- • AN: 16 • CA: 28 ///////////////////////////////////////// VD Unload request .Anode: 11 .Cathode: 11 Load request(Exist Jobs) .Anode:05 .Cathode: 06 Load request waiting for materials:- Anode:-52 Cathode:-60 Thank you ! June 16, 2025 at 7:49 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 Hoist driver error. Thank you June 16, 2025 at 7:56 AM, Shakir (MCS) : @FA Please check C1STKA72_C02 there is Ready off during Forking error. Thank you June 16, 2025 at 8:05 AM, Shakir (MCS) : @FA Please check E0STKC52_C01 Hoist driver error. Thank you June 16, 2025 at 8:27 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 is OOS. Thank you! June 16, 2025 at 8:42 AM, Barta Rudi : @FA NC ca 4/2 agv4 stop, please check , thank you June 16, 2025 at 9:03 AM, Sazzad Bhai SKon : @FA Please check the duplicated plates on following locations. C1STKA72 (0205904, 0200303, 0105304, 0105804, 0200101, 0100102, 0205806) C1STKC72 (0205801) June 16, 2025 at 9:15 AM, Shakir (MCS) : @FA Please check C1STKA71_C01 - MCP AP error Thank you June 16, 2025 at 9:15 AM, Nadiia Arkhipova : STK 1 line AGV machine#7 stop, please check, thanks June 16, 2025 at 9:21 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 40 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 67 • Cathode:15 GF NC reel Available :- • AN: 00 • CA: 04 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 14 Load request(Exist Jobs) .Anode:12 .Cathode: 10 Load request waiting for materials:- Anode:-48 Cathode:-52 Thank you ! June 16, 2025 at 9:22 AM, 최정한.KOVA : VD AN 3-3 챔버내 매거진 AGV 반송해주세요. 설비점검 필요합니다 June 16, 2025 at 9:25 AM, Dariimaa/다리마/Ivancsa : @이민재 check pls June 16, 2025 at 10:12 AM, 권기홍 : @FA 양극에 풀매거진이 잘 못들어가는 것 같습니다. 로봇쪽에 공공 플레이트를 좀 넣어줘야할 것 같습니다. June 16, 2025 at 10:23 AM, Koncz Tamás : We stop the An 51 Crane for inspection, work at height outern company! It takes 10-15 min max June 16, 2025 at 10:42 AM, Koncz Tamás : Finish! June 16, 2025 at 10:45 AM, Shakir (MCS) : @Fa Please check C1STKA72_C02, Port interface error. Thank you June 16, 2025 at 11:01 AM, Shakir (MCS) : @FA Please check C1CNV072_16_305 there is INV-01 Run time Over error. Thank you June 16, 2025 at 11:03 AM, Zulaa/졸라/Ivancsa FA : ? June 16, 2025 at 11:03 AM, Shakir (MCS) : Solved June 16, 2025 at 11:38 AM, Dariimaa/다리마/Ivancsa : Solved June 16, 2025 at 12:25 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 40 • Cathode: 86 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 106 • Cathode:45 GF NC reel Available :- • AN: 23 • CA: 50 ///////////////////////////////////////// VD Unload request .Anode: 28 .Cathode: 14 Load request(Exist Jobs) .Anode:04 .Cathode: 00 Load request waiting for materials:- Anode:-120 Cathode:-115 Thank you ! June 16, 2025 at 12:37 PM, Zulaa/졸라/Ivancsa FA : @MCS GF VD CA 4/2 chamber is empty, so please delete the AGV#02 job. June 16, 2025 at 12:39 PM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#07 in VD CA idle. Thank you. June 16, 2025 at 12:50 PM, Shakir (MCS) : Job cancelled June 16, 2025 at 12:52 PM, Shakir (MCS) : AGV started to move ✅ Thank you June 16, 2025 at 2:39 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 77 • Cathode: 115 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 135 • Cathode:58 GF NC reel Available :- • AN: 47 • CA: 88 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 16 Load request(Exist Jobs) .Anode:00 .Cathode: 00 Load request waiting for materials:- Anode:-200 Cathode:-155 Thank you ! June 16, 2025 at 3:16 PM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot June 16, 2025 at 3:17 PM, Shakir (MCS) : Checking June 16, 2025 at 3:19 PM, Anita Mirosnicsenko : Hello! Line 2 STK AGV 2 stopped, please check! Thank you! June 16, 2025 at 3:22 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 92 • Cathode: 123 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 (STK is OOS) • Cathode:56 GF NC reel Available :- • AN: 51 • CA: 96 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 02 Load request(Exist Jobs) .Anode:00 .Cathode: 00 Load request waiting for materials:- Anode:-200 Cathode:-167 Thank you ! June 16, 2025 at 3:36 PM, 심재훈 : What is OOS June 16, 2025 at 3:36 PM, 심재훈 : ? June 16, 2025 at 3:36 PM, Shakir (MCS) : Out of service: OOS June 16, 2025 at 3:36 PM, 심재훈 : Thank you June 16, 2025 at 3:40 PM, Shakir (MCS) : Updated GF Next lot quantity available Pre STK > Notching • Anode: 92 • Cathode: 127 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 126 • Cathode:51 GF NC reel Available :- • AN: 53 • CA: 74 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 02 Load request(Exist Jobs) .Anode:00 .Cathode: 00 Load request waiting for materials:- Anode:-200 Cathode:-167 Thank you ! June 16, 2025 at 3:54 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) Please delete the ST CA AGV#8 job because this port is full of material. Thank you! June 16, 2025 at 3:54 PM, Shakir (MCS) : Checking June 16, 2025 at 3:56 PM, Shakir (MCS) : Job cancelled ✅ June 16, 2025 at 3:57 PM, Dariimaa/다리마/Ivancsa : Can STK be returned? June 16, 2025 at 3:58 PM, Shakir (MCS) : Already transfer to STK Thank you June 16, 2025 at 4:31 PM, Sazzad Bhai SKon : @FA RTV is not moving for a long time. E0CNVC52_RTV01 June 16, 2025 at 5:12 PM, SKOH2 Nagy Zoltán : Dear FA Colleagues, Seems we will get some OPs from Module to move magazines manually in NC-VD-(maybe) ST area due to slow AGVs(?). Production does not have any information about it, but module Engineer Leader is here to check night shift job. Can someone attend on the GF to tell him the exact job???? June 16, 2025 at 5:14 PM, KIM SEYEON [김세연]_FA : I will June 16, 2025 at 5:15 PM, KIM SEYEON [김세연]_FA : please let me know module engineer leader call June 16, 2025 at 5:15 PM, Anita Mirosnicsenko : Line 3 STK AGV 9 stopped please check! Thank you! June 16, 2025 at 5:23 PM, Zulaa/졸라/Ivancsa FA : @MCS GF ST AN C3STM150_P01 is full, so please delete the AGV#09 job. June 16, 2025 at 5:30 PM, SKOH2 Nagy Zoltán : Insent it June 16, 2025 at 5:31 PM, Shakir (MCS) : Job cancelled and transferred to STK Thank you June 16, 2025 at 5:32 PM, 이민재 : GF VD AN LD/UD REQ 알람 6회 발생으로 화물 VD 챔버에 적재 하지못하고 있습니다 VD 챔버 점검 부탁드립니다 June 16, 2025 at 5:34 PM, 이민재 : 3-6호기 June 16, 2025 at 5:35 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) GF ST AN C3STM040_P02 is full, so please delete the AGV#03 job. June 16, 2025 at 5:38 PM, Shakir (MCS) : Job cancelled and transferred to STK Thank you June 16, 2025 at 5:42 PM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 반송잡 안가게 막을테니 한국진공에서 점검할수 있도록 부탁드립니다. June 16, 2025 at 5:44 PM, 심재훈 : 이게 어떤경우에 발생하는 Alarm 인가요? June 16, 2025 at 5:45 PM, KIM SEYEON [김세연]_FA : VD 설비와 PIO 하다가 발생하고 ㄴ내부적으로 VD내 결선문제 ㄴVD BCR 각도 문제 로 발생합니다. June 16, 2025 at 5:46 PM, KIM SEYEON [김세연]_FA : 지난주 한국진공하고 계속 점검했던 그 알람입니다. June 16, 2025 at 5:46 PM, 심재훈 : AgV 정위치 도달 못하는 이슈는 없나요? June 16, 2025 at 5:46 PM, 심재훈 : 우선 설비는 정지 하겠습니다. June 16, 2025 at 5:46 PM, KIM SEYEON [김세연]_FA : 네 감사합니다. 한국진공하고 명일 점검 가능하게 부탁드립니다. June 16, 2025 at 5:47 PM, 심재훈 : AgV 정위치 도착 오차도 20mm이상 되는 것으로 알고 있습니다. 이정도 벗어나면 세팅을 해놔도 알람 계속 발생합니다. 오차를 줄이는 것도 같이 검토 부탁 드립니더 June 16, 2025 at 5:48 PM, KIM SEYEON [김세연]_FA : 네 같이 점검해보시죠. June 16, 2025 at 5:48 PM, 심재훈 : @원재 VD anode 3-6설비 전원 내려주세요. 한국진공 점검 필요라고 post it 붙여주시기 바랍니다 June 16, 2025 at 5:57 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 16, 2025 at 6:03 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (3): Böröczki Balázs, Takács Ádám, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 FA, June 16, 2025 at 6:05 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 71 • Cathode: 127 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 83 • Cathode:04 GF NC reel Available :- • AN: 21 • CA: 122 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 02 Load request(Exist Jobs) .Anode:04 .Cathode: 04 Load request waiting for materials: Anode:164 Cathode:131 June 16, 2025 at 6:19 PM, KIM SEYEON [김세연]_FA invited Kaniz / Ivancsa FA and Junaeed / Ivancsa FA. June 16, 2025 at 6:19 PM, KIM SEYEON [김세연]_FA : . June 16, 2025 at 6:20 PM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA @방혁 PM(Bang.Hyuk) FA 금일 material operators 입니다. @Kaniz / Ivancsa FA @Junaeed / Ivancsa FA June 16, 2025 at 6:22 PM, Chinges Fa : Hello MCS Stage Anode AGV2 full magazine and full magazine C3TM150 and AGV ACS emergency check June 16, 2025 at 6:26 PM, VK (mcs) : Do you want me, to cancel current job of AGV#2 ? June 16, 2025 at 6:27 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.16 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(0): Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: ---- --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Takarítás Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János --------------- Support(2): 김지수(Gyuri)_OH2 June 16, 2025 at 6:32 PM, 권기홍 : @FA NC GF AN VC03 Not Moving. Check please June 16, 2025 at 6:39 PM, 김현태 : VD CA AGV #4 Error Thanks you June 16, 2025 at 6:40 PM, Csanálosi Gábor FA : This message was deleted. June 16, 2025 at 6:40 PM, 김현태 : VD CA AGV #1 Error Thanks you June 16, 2025 at 6:42 PM, Csanálosi Gábor FA : Done June 16, 2025 at 6:45 PM, Csanálosi Gábor FA : @VK (mcs) gf an st agv2 trying to unload to an occupied port, can you check it please? June 16, 2025 at 6:45 PM, VK (mcs) : Checking June 16, 2025 at 6:47 PM, VK (mcs) : C3STM150 in MCS is empty and we received LR for that port. I will cancel the job and clear LR. June 16, 2025 at 6:49 PM, Csanálosi Gábor FA : Thank you June 16, 2025 at 7:19 PM, Péti Gábor : Could I request this report every hour today? June 16, 2025 at 7:20 PM, VK (mcs) : For sure, I will update it. June 16, 2025 at 7:20 PM, Péti Gábor : Thank you! June 16, 2025 at 7:24 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 57 • Cathode: 132 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 53 • Cathode:00 GF NC reel Available :- • AN: 00 • CA: 103 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 02 Load request(Exist Jobs) .Anode:08 .Cathode: 06 Load request waiting for materials: Anode:124 Cathode:111 June 16, 2025 at 8:22 PM, M.Ferenc "B"Nc/Vd SL : @FA @Csanálosi Gábor FA Tud jönni valaki Ca 2-1 NC géphez? June 16, 2025 at 8:22 PM, Csanálosi Gábor FA : @Takács Ádám FA Tech Consuela June 16, 2025 at 8:22 PM, Szücs Géza FT-B : @Takács Ádám FA Tech légyszi June 16, 2025 at 8:23 PM, Takács Ádám FA Tech : 🫡 June 16, 2025 at 8:23 PM, M.Ferenc "B"Nc/Vd SL : Kiadó CV ajtó letört. June 16, 2025 at 8:25 PM, 전 운 (Jeon Woon) : @MCS @FA Due to long-term non-operation of Line 1 and 2, Stack Station was returned to manual. If there is a 1 and 2 Line AGV job, please help me. June 16, 2025 at 8:27 PM, VK (mcs) : There is no any job for 1st and 2nd line stacking. June 16, 2025 at 8:28 PM, 김희래 : @FA NC CA AGV#06 stop and no error. June 16, 2025 at 8:38 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 129 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 29 • Cathode:00 GF NC reel Available :- • AN: 00 • CA: 104 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 02 Load request(Exist Jobs) .Anode:08 .Cathode: 16 Load request waiting for materials: Anode:84 Cathode:87 June 16, 2025 at 8:46 PM, 박시우 : @FA Please check about VD AN AGV VC02 and VC06 June 16, 2025 at 8:48 PM, Lan Nhi : @ RTV @RTV Hello For AN E0STKC51 is OOS not providing reel for a long time. Plz check for me Thank you June 16, 2025 at 8:56 PM, VK (mcs) : Are you asking about anode reels for notching area? June 16, 2025 at 8:59 PM, Csanálosi Gábor FA : 8 reels on the manual ports, cranes are online, but no jobs. @VK (mcs) @Lan Nhi June 16, 2025 at 9:03 PM, VK (mcs) : I think she is asking anode side. For cathode side there is no problem and carriers are providing properly. Anode side. There is no available material. June 16, 2025 at 9:04 PM, Csanálosi Gábor FA : Ah okay, i see. Thanks June 16, 2025 at 9:12 PM, VK (mcs) : @FA Please check AGV #9 In front of Cathode Notching first line 1/3 June 16, 2025 at 9:16 PM, Csanálosi Gábor FA : @manufacturing CA 72 Manual 1 port is in error, pls restock plate. June 16, 2025 at 9:19 PM, Lan Nhi : Yes June 16, 2025 at 9:21 PM, VK (mcs) : There is no error. Material is not available. As I see 4 carriers assigned to anode reel conveyor right now. June 16, 2025 at 9:25 PM, 김지수PM(Gyuri)_FA : @fa could you please check MLA4099 on the c1stka72_P13 June 16, 2025 at 9:25 PM, 김지수PM(Gyuri)_FA : It's not moving into the p13 op01 June 16, 2025 at 9:25 PM, VK (mcs) : Can you please check it out? It has been waiting for a while. Thx June 16, 2025 at 9:26 PM, 김지수PM(Gyuri)_FA : This message was deleted. June 16, 2025 at 9:27 PM, Csanálosi Gábor FA : On it June 16, 2025 at 9:30 PM, Csanálosi Gábor FA : Solved June 16, 2025 at 9:31 PM, 김지수PM(Gyuri)_FA : Thanks a lot!!! June 16, 2025 at 9:32 PM, VK (mcs) : Is it MLC2165? June 16, 2025 at 9:33 PM, Csanálosi Gábor FA : Cant remember, but i think its gone June 16, 2025 at 9:37 PM, VK (mcs) : This message was deleted. June 16, 2025 at 9:37 PM, Csanálosi Gábor FA : Yes, that is. I delete data, nothings here June 16, 2025 at 9:38 PM, VK (mcs) : Problem was job was canceled 5 days ago by OP's action but it remained in RTD. I canceled from RTD as well. Now if they try it then it will move. Thx June 16, 2025 at 9:40 PM, Csanálosi Gábor FA : Resolved then, cheers! June 16, 2025 at 9:48 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 29 • Cathode: 126 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 20 • Cathode:01 GF NC reel Available :- • AN: 00 • CA: 122 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 07 Load request(Exist Jobs) .Anode:08 .Cathode: 20 Load request waiting for materials: Anode:64 Cathode:65 June 16, 2025 at 10:47 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 124 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 23 • Cathode:03 GF NC reel Available :- • AN: 00 • CA: 119 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 14 Load request(Exist Jobs) .Anode:04 .Cathode: 10 Load request waiting for materials: Anode:68 Cathode:69 June 16, 2025 at 10:58 PM, 김지수PM(Gyuri)_FA : @fa please check the C1STKC72_P21 June 16, 2025 at 10:58 PM, Takács Ádám FA Tech : 🫡 June 16, 2025 at 11:39 PM, Lan Nhi : @FA Hello. Please let AGV pick up the goods at machine 5-1(37) VD. An, help me. The machine is having an installation error and is over time, so the technician asked to remove the magazines. June 17, 2025 at 12:07 AM June 17, 2025 at 12:07 AM, 김지수PM(Gyuri)_FA : Vc01 Vc02 will transfer it June 17, 2025 at 12:09 AM, Lan Nhi : Thạnk you June 17, 2025 at 12:21 AM, Lan Nhi : @MCS Hello. Please check the reel warehouse VC01, VC02 is very slow to come out. June 17, 2025 at 12:23 AM, VK (mcs) : I am sorry but which warehouse? Anode? June 17, 2025 at 12:31 AM, 김지수PM(Gyuri)_FA : @fa please check AN VD VC06 June 17, 2025 at 12:31 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa June 17, 2025 at 12:31 AM, VK (mcs) : @FA Please check Cathode Post-STK C72 port 21(13002) It is in manual mode. Thx June 17, 2025 at 12:32 AM, Csanálosi Gábor FA : Checking June 17, 2025 at 12:35 AM, 김지수PM(Gyuri)_FA : Was there any problem in there?, MLC2026 is still on that port June 17, 2025 at 12:37 AM, Csanálosi Gábor FA : I am here to check June 17, 2025 at 12:38 AM, Csanálosi Gábor FA : Plate got stuck, now its o its way June 17, 2025 at 12:38 AM, Csanálosi Gábor FA : On* June 17, 2025 at 12:38 AM, 김지수PM(Gyuri)_FA : Thanks!!! June 17, 2025 at 12:39 AM, Csanálosi Gábor FA : On duty ;) June 17, 2025 at 12:44 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 06 • Cathode: 109 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 28 • Cathode:03 GF NC reel Available :- • AN: 00 • CA: 121 ///////////////////////////////////////// VD Unload request .Anode: 24 .Cathode: 07 Load request(Exist Jobs) .Anode:10 .Cathode: 06 Load request waiting for materials: Anode:56 Cathode:65 June 17, 2025 at 12:53 AM, 김희래 : @FA Can you NC CA AGV#4 auto switch turn to manual and auto? June 17, 2025 at 12:54 AM, 김지수PM(Gyuri)_FA : @Natsag/ Ivansca FA @Gua/ IvancsaFa please check it June 17, 2025 at 12:58 AM, Lan Nhi : line 4&5 warehouse June 17, 2025 at 1:01 AM, VK (mcs) : Please mention equipment ID then I will check the reason. Thx June 17, 2025 at 1:19 AM, M.Ferenc "B"Nc/Vd SL : @Csanálosi Gábor FA 2/2 bocsánat. June 17, 2025 at 1:22 AM, Lan Nhi : M01,M02,03,04,05,06,07,08 An has not been provided with reel for a long time. Please check for me. Thanks a lot June 17, 2025 at 1:24 AM, VK (mcs) : Unfortunately there is insufficient anode material. June 17, 2025 at 1:34 AM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 3-7 The chambers has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 17, 2025 at 1:39 AM, Lan Nhi : Thank you June 17, 2025 at 1:41 AM, 김지수PM(Gyuri)_FA : Vc04 vc05 will transfer it June 17, 2025 at 1:42 AM, M.Ferenc "B"Nc/Vd SL : Thank you June 17, 2025 at 1:51 AM, 조한진(Jin) : @VK (mcs) hello. 3Line ST Stack AGV Station has 5 UR Carrier location Miss Match. Can you delete the job? June 17, 2025 at 1:53 AM, VK (mcs) : Do you mean AGV # 5 in the 3rd line stacking? June 17, 2025 at 1:56 AM, 조한진(Jin) : There are 5 stations: 150, 148, 147, 146, 145. June 17, 2025 at 1:56 AM, VK (mcs) : There is only one UR from C3STM140/P01, should I cancel it? June 17, 2025 at 1:56 AM, VK (mcs) : Checking June 17, 2025 at 2:02 AM, VK (mcs) : C3STM120/P01 C3STM150 /P01&P02 C3STMq160/ P01 &P02 In MCS are empty. If you are asking about above machines. None of them have UR. For transferring materials please request it manually. June 17, 2025 at 2:12 AM, 조한진(Jin) : Thanks~ June 17, 2025 at 2:31 AM, Péti Gábor : GF AN NC stop. We don't have AN reel. Is this really true? What do you see in the system? @VK (mcs) June 17, 2025 at 2:32 AM, VK (mcs) : Yes, available material for anode reel is zero. June 17, 2025 at 2:33 AM, Péti Gábor : Thank you. June 17, 2025 at 2:59 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 30 • Cathode: 63 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 47 • Cathode:00 GF NC reel Available :- • AN: 00 • CA: 113 ///////////////////////////////////////// VD Unload request .Anode: 14 .Cathode: 11 Load request(Exist Jobs) .Anode:00 .Cathode: 08 Load request waiting for materials: Anode:100 Cathode:45 June 17, 2025 at 3:54 AM, Csanálosi Gábor FA : @M.Ferenc "B"Nc/Vd SL figyi! Ha manuálban töltitek fel a ca oldalon a gépeket üres magazinnal, és nem tud vinni az agv a robottól, akkor a telieket sem tudja bezavarni a raktárba. Tudsz ebben segíteni? June 17, 2025 at 3:58 AM, M.Ferenc "B"Nc/Vd SL : Mi részünkről nem raktunk be manuálisan. June 17, 2025 at 3:58 AM, M.Ferenc "B"Nc/Vd SL : De rögtön ott vagyok June 17, 2025 at 4:07 AM, VK (mcs) : @FA Please check AGV #3 Cathode Notching 2/1 port 3 June 17, 2025 at 4:44 AM, 최태영 : @FA GF NC Ca VC02 & VC08 seems partly charged. would you check status? If it would be moving, please do manual move to proceed own jobs. (It seem have a jobs) June 17, 2025 at 4:48 AM, Chinges Fa : MCS Noching Cathode AGV8 full magazine is charging check June 17, 2025 at 4:50 AM, 김지수PM(Gyuri)_FA : @VK (mcs) could you please transfer UNK carrier on the VC08 to the MP02 (gf ca nc) June 17, 2025 at 4:50 AM, M.Ferenc "B"Nc/Vd SL : @Csanálosi Gábor FA @Takács Ádám FA Tech Tud valamelyikőtök Ca 2/2-re jönni? June 17, 2025 at 4:53 AM, 최태영 : MCS job이 사라졌네요 확인 부탁드립니다 @MCS @FA June 17, 2025 at 4:54 AM, 방혁 PM(Bang.Hyuk) FA : 수동으로 화물 제거해서 일단 해소부터 시키겠습니다 June 17, 2025 at 4:54 AM, 최태영 : 네 감사합니다 June 17, 2025 at 4:57 AM, Chinges Fa : AGV08and AGV10 check please MCS June 17, 2025 at 5:00 AM, 김지수PM(Gyuri)_FA : Remove the plates onto the agv08 agv10 manually June 17, 2025 at 5:03 AM, Chinges Fa : Done June 17, 2025 at 5:08 AM, Chinges Fa : Stage anode AGV 10 full magazine is charging June 17, 2025 at 5:11 AM, 김지수PM(Gyuri)_FA : Does carrier actually exist in VC10? June 17, 2025 at 5:13 AM, VK (mcs) : AGV after charging will transfer material to destination June 17, 2025 at 5:23 AM, VK (mcs) : What is the carrier ID on AGV 10 right now? June 17, 2025 at 5:48 AM, KIM SEYEON [김세연]_FA : @VK (mcs) please share available lot June 17, 2025 at 5:50 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.17 Time: 06:00~ 18:00 1.Assy 이민재(Lee minjae) June 17, 2025 at 5:55 AM, Shakir (MCS) : Good Morning GF Next lot quantity available Pre STK > Notching • Anode: 93 • Cathode: 56 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 69 • Cathode:11 GF NC reel Available :- • AN: 00 • CA: 112 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 04 Load request(Exist Jobs) .Anode:00 .Cathode: 10 Load request waiting for materials: Anode:184 Cathode:62 June 17, 2025 at 6:04 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3+1): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 17, 2025 at 6:06 AM, Barta Rudi : @FA Hello. NC Ca 2/2 AGV 8 stop please check thank you June 17, 2025 at 6:07 AM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#10, 02 in ST AN idle. Thank you. June 17, 2025 at 6:08 AM, Shakir (MCS) : Checking June 17, 2025 at 6:10 AM, Shakir (MCS) : Issue resolved ✅ AGV started to move Thank you June 17, 2025 at 6:28 AM, Zulaa/졸라/Ivancsa FA : @MCS GF NC CA C1NCC030_P03 is 4 magazin, so please delete the AGV#06 job. Thank you. June 17, 2025 at 6:30 AM, Yon Ko/연커/ : @FA Tech E0STKC51 INV- 01 RunTimeOver Error check it. thank u! June 17, 2025 at 6:32 AM, Shakir (MCS) : Job cancelled, please send it to gantry input port. Thank you June 17, 2025 at 6:47 AM, Hồng Anh SL NC&VD 1F : @Fa team Hello, good morning. Pls tell me that when the reel warehouse GF AN side working again? June 17, 2025 at 6:58 AM, Barta Rudi : @FA NC ca 2/1 AGV 10 stop please check thank you June 17, 2025 at 7:20 AM, Nadiia Arkhipova invited Oleh Kaplinskyi. June 17, 2025 at 7:28 AM, Barta Rudi : @FA NC ca 1/3 AGV 3 stop, please check thank you June 17, 2025 at 7:35 AM, Shakir (MCS) : @FA please check E0STKC52_C01 Load oversize right error Thank you June 17, 2025 at 7:41 AM, Shakir (MCS) : Good Morning GF Next lot quantity available Pre STK > Notching • Anode: 126 • Cathode: 45 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 70 • Cathode:37 GF NC reel Available :- • AN: 00 • CA: 109 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 06 Load request(Exist Jobs) .Anode:00 .Cathode: 06 Load request waiting for materials: Anode:200 Cathode:68 June 17, 2025 at 7:51 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 there is Run time Over error. Thank you June 17, 2025 at 8:04 AM, Shakir (MCS) : @FA Please check E0STKC51_P02 is OOS. Thank you June 17, 2025 at 8:14 AM, Sazzad Bhai SKon : @FA Good morning. Please check the following duplicated plates: C1STKA71 (shelf: 0104702, 0204703, 0104904) June 17, 2025 at 9:24 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 155 • Cathode: 35 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 48 • Cathode:27 GF NC reel Available :- • AN: 00 • CA: 117 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 07 Load request(Exist Jobs) .Anode:00 .Cathode: 02 Load request waiting for materials: Anode:204 Cathode:68 June 17, 2025 at 9:49 AM, 최정한.KOVA : GF VD CA 3-6 LR 살아있나요? June 17, 2025 at 9:54 AM, Shakir (MCS) : LR received successfully at 8:10, but there is no material. Thank you June 17, 2025 at 9:57 AM, Barta Rudi : @Fa Vd ca agv7 stop please check thank you June 17, 2025 at 10:00 AM, Zulaa/졸라/Ivancsa FA : Done June 17, 2025 at 10:00 AM, Barta Rudi : @FA @Shakir (MCS) Hello. Machines 2-3 #12 and 6-6 #51 require technician adjustment, so please send the material inside them back to the warehouse via AGV. Thank you! June 17, 2025 at 10:01 AM, Shakir (MCS) : CA or AN VD? June 17, 2025 at 10:01 AM, Barta Rudi : Sorry Cathode June 17, 2025 at 10:01 AM, Shakir (MCS) : Checking June 17, 2025 at 10:04 AM, Shakir (MCS) : VD is not inservice, unfortunately it will not work with OOS, Once chamber inservice only I can transfer to STK. Thank you June 17, 2025 at 10:23 AM, Mr.Miti (미티) FA : switch the production back to auto mode, then please send an AGV to unload the material. thank you very much! June 17, 2025 at 10:35 AM, Shakir (MCS) : Transfer command created for both VD 2-3 & 6-6 CA to Post VD STK. @Barta Rudi Thank you for June 17, 2025 at 10:37 AM, Mr.Miti (미티) FA : Thank you! June 17, 2025 at 10:52 AM, 지석범PM (이반차FA) : @최정한.KOVA GF VD 2-2 PIO UL_REQ 응답이 없어서 AGV 알람 발생중입니다. VD 설비로 확인해도 BCR 리딩 정상, PIO 신호 정상 수신 확인되는데, UL_REQ만 응답이 없는 상태입니다. 확인부탁드립니다. June 17, 2025 at 10:53 AM, 지석범PM (이반차FA) : 죄송합니다. 2-3입니다 June 17, 2025 at 11:06 AM, Shakir (MCS) : @Zulaa/졸라/Ivancsa FA Could you please check 2-3 VD CA, AGV unable to unload the plate, AGV assigned and Unassigned several times. Thank you June 17, 2025 at 11:09 AM, Shakir (MCS) : Job has been cancelled for 2-3 as per request Thank you June 17, 2025 at 11:17 AM, Sazzad Bhai SKon : @FA Reel bridge port is in alarm: port power off. E0STKC52_B04 June 17, 2025 at 11:18 AM, Sazzad Bhai SKon : Just now came to in-service* June 17, 2025 at 11:20 AM, P.Bence A SSL : Check again please thank you ! June 17, 2025 at 11:20 AM, Shakir (MCS) : Checking June 17, 2025 at 11:25 AM, Yon Ko/연커/ : Please check chamber 6-6 of the VD CA. The AGV is showing a FORK LD/UD error, which has occurred 5 times. Thank u! June 17, 2025 at 11:25 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 185 • Cathode: 09 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 12 • Cathode:25 GF NC reel Available :- • AN: 00 • CA: 135 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 25 Load request(Exist Jobs) .Anode:00 .Cathode: 04 Load request waiting for materials: Anode:208 Cathode:48 June 17, 2025 at 11:40 AM, Sazzad Bhai SKon : @FA Please check GF CA AGV C0NGV01_VC02 June 17, 2025 at 11:47 AM, Anita Mirosnicsenko : Line 3 STK AGV 10 stopped, please check! Thank you! June 17, 2025 at 11:51 AM, Zaya/ivancsa FA : @최정한.KOVA June 17, 2025 at 11:52 AM, KIM SEYEON [김세연]_FA : @최정한.KOVA @JAEYOON KIM / CS 매니저님 오후에 확인 부탁드립니다. June 17, 2025 at 12:07 PM, JAEYOON KIM / CS : 네 13시에 같이 확인하기로 했습니다. June 17, 2025 at 1:02 PM, Barta Rudi : @Fa @Shakir (MCS) Cathode Robot #2 Robot Operation MGZ setect sensor error, please check thank you !!! June 17, 2025 at 1:03 PM, Shakir (MCS) : @FA please check June 17, 2025 at 1:05 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please FA technicians check this June 17, 2025 at 1:09 PM, Mr.Miti (미티) FA : Technicians are constantly working on the errors that occur. June 17, 2025 at 1:10 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 220 • Cathode: 21 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:00 GF NC reel Available :- • AN: 00 • CA: 136 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 61 Load request(Exist Jobs) .Anode:00 .Cathode: 00 Load request waiting for materials: Anode:204 Cathode:24 June 17, 2025 at 1:12 PM, Yon Ko/연커/ : We still waiting… June 17, 2025 at 1:13 PM, KIM SEYEON [김세연]_FA : @JAEYOON KIM / CS 매니저님 VD 6-6 점검 작업시간 확인 부탁드립니다. June 17, 2025 at 1:13 PM, Barta Rudi : @Shakir (MCS) The AGV does not deliver empty magazines to the following machines: NC Ca 2/3, 3/1, 4/3, 4/1, 5/3, 6/2, 6/1, 3/1, 3/2, 2/2. Please check it, thanks! June 17, 2025 at 1:16 PM, Barta Rudi : @Shakir (MCS) Also, the following machines are already full of finished magazines, but the AGV is not coming to pick them up: NC Ca 1/1, 1/2, 1/3, 2/3, 3/3, 4/2, 5/1, 6/1, 6/2, 6/3, 3/2, 3/1, 2/2, 2/1. Please check this as well. Thank you! June 17, 2025 at 1:24 PM, Shakir (MCS) : 4/3, 5/3,6/2,3/1,2/3: Job exists also also the agvs are busy on doing LR/UR Thank you June 17, 2025 at 1:31 PM, Shakir (MCS) : 5/1,2/2,1/1,3/3 job initiated ✅ June 17, 2025 at 1:48 PM, Yon Ko/연커/ : @MCS NC CA AGV7 is idle now. Check it please. Thank u! June 17, 2025 at 1:49 PM, Shakir (MCS) : Checking June 17, 2025 at 1:52 PM, Shakir (MCS) : Issue solved AGV Started to move Thank you June 17, 2025 at 2:02 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 17, 2025 at 2:05 PM, Shakir (MCS) : Checking June 17, 2025 at 2:08 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 241 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:01 GF NC reel Available :- • AN: 00 • CA: 140 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 57 Load request(Exist Jobs) .Anode:04 .Cathode:14 Load request waiting for materials: Anode:196 Cathode:12 June 17, 2025 at 3:08 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 248 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 09 Post STK > Stacking • Anode: 00 • Cathode:08 GF NC reel Available :- • AN: 00 • CA: 131 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 51 Load request(Exist Jobs) .Anode:00 .Cathode:12 Load request waiting for materials: Anode:184 Cathode:04 June 17, 2025 at 3:25 PM, Yon Ko/연커/ : @MCS NC CA AGV7, AGV10 is idle now. Check it please. Thank u! June 17, 2025 at 3:25 PM, Shakir (MCS) : Checking June 17, 2025 at 3:29 PM, Shakir (MCS) : Issue solved ✅ AGV started to move Thank you June 17, 2025 at 4:16 PM, Shakir (MCS) : @FA Please check E0STKA52, there is SCP Main Power CP trip error. Thank you June 17, 2025 at 4:18 PM, Hồng Anh SL NC&VD 1F : @FA team pls come to port M05 reel warehouse AN for check. The empty tray cannot come back to wh now. Maybe carrier ID have some problem June 17, 2025 at 5:01 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 239 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:51 GF NC reel Available :- • AN: 00 • CA: 165 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 33 Load request(Exist Jobs) .Anode:00 .Cathode:06 Load request waiting for materials: Anode:148 Cathode:20 June 17, 2025 at 5:20 PM, Barta Rudi : @Shakir (MCS) Empty magazines are arriving very slowly to the NC CA machine. Could you please check this? Thank you! June 17, 2025 at 5:25 PM, Shakir (MCS) : There is no CA empty magazine available, No lot. Thank you June 17, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.17 "B" műszak, 10+1/12+2 Tech, 1SL Overtime(1): Szabadi Miklós Holiday(0): Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(5): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (2): Csanálosi Gábor, Takács Ádám --------------- Assy 1F (2): Böröczki Balázs, Pintye Miklós --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 17, 2025 at 6:35 PM, VK (mcs) : @FA Can you please check Cathode 3rd Gantry C0PVC030 . MGZ (MC5195 )is actual there ? thx June 17, 2025 at 6:39 PM, 김지수PM(Gyuri)_FA : @fa please check e0stka51 thanks June 17, 2025 at 6:39 PM, VK (mcs) : @FA Please check Anode reel STK A51 Ready off during forking. June 17, 2025 at 6:48 PM, Takács Ádám FA Tech : A51 Solved June 17, 2025 at 6:49 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available kot June 17, 2025 at 6:54 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 224 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:91 GF NC reel Available :- • AN: 00 • CA: 191 ///////////////////////////////////////// VD Unload request .Anode: 01 .Cathode: 09 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:132 Cathode:48 June 17, 2025 at 7:22 PM, 이도형 (Lee) : @FA NC Ca AGV #3, 1, 8 이상 없는지 확인 부탁드립니다. 한곳에서 너무 정차중 인것 같습니다 June 17, 2025 at 7:27 PM, KIM SEYEON [김세연]_FA : @김지수PM(Gyuri)_FA 피엠님 확인부탁드립니다 June 17, 2025 at 7:32 PM, 은향(OH EUN HYANG) : 정상작동되었읍니다 June 17, 2025 at 7:33 PM, Csanálosi Gábor FA : @VK (mcs) good evening, pls check gf an st agv 5, its trying to unload to an occupied port. June 17, 2025 at 7:35 PM, VK (mcs) : Job cancelled. Port is empty in system and we received LR. June 17, 2025 at 7:36 PM, Csanálosi Gábor FA : Thank you June 17, 2025 at 7:43 PM, 정은탁 (Jung EunTak) : @FA NC An AGV #5 Error. Please Check. June 17, 2025 at 7:44 PM, Csanálosi Gábor FA : On it June 17, 2025 at 7:46 PM, Csanálosi Gábor FA : Done June 17, 2025 at 7:46 PM, VK (mcs) : Can someone please check this. Thx June 17, 2025 at 7:47 PM, Csanálosi Gábor FA : Give me few mins, after rtv error ill check June 17, 2025 at 7:47 PM, VK (mcs) : Thanks a lot June 17, 2025 at 8:02 PM, Gua/ IvancsaFa : @mcs hello, can you check ST AN AGV#7 and 3 job? June 17, 2025 at 8:14 PM, VK (mcs) : Is that port full? Because we received load request for those equipment June 17, 2025 at 8:15 PM, Gua/ IvancsaFa : yes, the port is full June 17, 2025 at 8:15 PM, Gua/ IvancsaFa : can you delete the job of AGVs June 17, 2025 at 8:16 PM, VK (mcs) : Okay I will cancel it. June 17, 2025 at 8:16 PM, Gua/ IvancsaFa : okayy thank you June 17, 2025 at 8:17 PM, VK (mcs) : Jobs cancelled June 17, 2025 at 8:25 PM, 김지수PM(Gyuri)_FA : @fa please check e0cnvc52 thanks in advance June 17, 2025 at 8:28 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir ) please share available kot June 17, 2025 at 8:30 PM, Csanálosi Gábor FA : On it, rtv and one plate has some issues June 17, 2025 at 8:31 PM, M.Ferenc "B"Nc/Vd SL : @FA GF VD Ca 5-7 The chambers has stopped due to a fault, please unpack the magazines with Agv so that the technicians can replace the faulty part and we can dry it again later. June 17, 2025 at 8:32 PM, Csanálosi Gábor FA : I believe its resolved finally. :) June 17, 2025 at 8:32 PM, 김지수PM(Gyuri)_FA : Thanks! June 17, 2025 at 8:32 PM, 김지수PM(Gyuri)_FA : I will check June 17, 2025 at 8:35 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 195 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:130 GF NC reel Available :- • AN: 00 • CA: 192 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 03 Load request(Exist Jobs) .Anode:10 .Cathode:00 Load request waiting for materials: Anode:120 Cathode:92 June 17, 2025 at 8:35 PM, Csanálosi Gábor FA : Nope, not here June 17, 2025 at 8:36 PM, 김지수PM(Gyuri)_FA : Vc06 vc07 will transfer plates June 17, 2025 at 8:37 PM, Csanálosi Gábor FA : @VK (mcs) all three ca gantry robots doesnt get empty magazine plates, can you check? June 17, 2025 at 8:37 PM, M.Ferenc "B"Nc/Vd SL : Thank you! June 17, 2025 at 8:38 PM, VK (mcs) : Available material is zero June 17, 2025 at 8:39 PM, Csanálosi Gábor FA : Awww. Thanks June 17, 2025 at 8:39 PM, VK (mcs) : Thank you for confirming June 17, 2025 at 9:19 PM, Lan Nhi : @FA team Hello. Plz help me remove the goods in machine 43(5-7) VD/Ca so that the technician can replace the heating bar. Thanks. June 17, 2025 at 9:20 PM, Gua/ IvancsaFa : @mcs can you check VD CA AGV#6,7 job? the chamber 5-7 door is closed but agvs come to take products. thank you June 17, 2025 at 9:23 PM, 김지수PM(Gyuri)_FA : I already created job but error was occurred at VC06 while vc06 was transferring the plates June 17, 2025 at 9:23 PM, VK (mcs) : Jobs created manually on the request of operations. Please check above messages June 17, 2025 at 9:24 PM, Gua/ IvancsaFa : because chamber door is closed June 17, 2025 at 9:24 PM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check it thanks!! June 17, 2025 at 9:25 PM, VK (mcs) : @Lan Nhi Please check the machine 5/7 Jobs created but door is closed. June 17, 2025 at 9:26 PM, Lan Nhi : yes thanks for your information June 17, 2025 at 9:35 PM, 김지수PM(Gyuri)_FA : I gonna delete the jobs for 5-7 chamber! June 17, 2025 at 9:42 PM, Chinges Fa : @mcs hello, can you check ST AN AGV#9 job? June 17, 2025 at 9:46 PM, VK (mcs) : Port is full? June 17, 2025 at 9:47 PM, Chinges Fa : Yes port is full June 17, 2025 at 9:47 PM, VK (mcs) : Job cancelled June 17, 2025 at 9:48 PM, Chinges Fa : Thank you June 17, 2025 at 9:48 PM, Chinges Fa : Thank you June 17, 2025 at 9:52 PM, Lan Nhi : Please check again for me. The door has been reopened. June 17, 2025 at 10:00 PM, 김지수PM(Gyuri)_FA : VC04 VC07 will transfer plates June 17, 2025 at 10:12 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 165 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:151 GF NC reel Available :- • AN: 00 • CA: 211 ///////////////////////////////////////// VD Unload request .Anode: 11 .Cathode: 21 Load request(Exist Jobs) .Anode:06 .Cathode:04 Load request waiting for materials: Anode:104 Cathode:100 June 17, 2025 at 10:22 PM, Gua/ IvancsaFa : @mcs NC CA AGV #10 is idle please check it out June 17, 2025 at 10:23 PM, Gua/ IvancsaFa : also, AGV #2. It makes blocking June 17, 2025 at 10:24 PM, VK (mcs) : Is there any carrier on AGV 10? June 17, 2025 at 10:25 PM, 김지수PM(Gyuri)_FA : Will be solved soon June 17, 2025 at 10:25 PM, Gua/ IvancsaFa : no nothing June 17, 2025 at 10:25 PM, 김지수PM(Gyuri)_FA : Solved June 17, 2025 at 10:44 PM, Debreczeni Ármin : Agv #10 stopped front of line 1 stacking June 17, 2025 at 11:01 PM, Truong : NC AN agv #6 error please come check @FA June 17, 2025 at 11:01 PM, M.Ferenc "B"Nc/Vd SL : @FA VD Ca 6-8 The chamber finished drying at 2 pm, but the lower right and upper right plates were not transported by AGV to warehouse 72. Please have them transported. June 17, 2025 at 11:02 PM, Csanálosi Gábor FA : @VK (mcs) please check June 17, 2025 at 11:03 PM, Csanálosi Gábor FA : The agv is in error becouse the port is oos June 17, 2025 at 11:08 PM, VK (mcs) : UR received at 14:39:20 and transport job created at 14:39:40 . But job cancelled by OP action at at 14:40 Please apply again UR for ports 3 and 4. June 17, 2025 at 11:12 PM, Csanálosi Gábor FA : Solved June 17, 2025 at 11:12 PM, 이도형 (Lee) : @FA NC Ca #10 AGV is stopped. Please check June 17, 2025 at 11:29 PM, Nauman/Ivancsa FA : 1. Time : 23:27 2. Machine : GF NC CA ROBOT #1 3. Port : 8052 4. Plate : MLC3110 5. Work Process : added June 17, 2025 at 11:31 PM, 정은탁 (Jung EunTak) : @FA NC An AGV #5 Error. Please Check. June 17, 2025 at 11:59 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity thank you June 18, 2025 at 12:05 AM June 18, 2025 at 12:05 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 130 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:183 GF NC reel Available :- • AN: 00 • CA: 243 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 01 Load request(Exist Jobs) .Anode:06 .Cathode:00 Load request waiting for materials: Anode:88 Cathode:108 June 18, 2025 at 12:23 AM, 김지수PM(Gyuri)_FA : @fa please check vc09 an NC thanks June 18, 2025 at 12:25 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check c1cnv072 thanks!! June 18, 2025 at 12:29 AM, Gua/ IvancsaFa : solved June 18, 2025 at 12:59 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKC52 > oversize thanks! June 18, 2025 at 12:59 AM, Takács Ádám FA Tech : Úton vagyok June 18, 2025 at 12:59 AM, Nauman/Ivancsa FA : 1. Time : 12:59 2. Machine : GF NC CA ROBOT #2 3. Port : 8037 4. Plate : MLC4110 5. Work Process : added June 18, 2025 at 1:06 AM, Takács Ádám FA Tech : Készen van 💪 June 18, 2025 at 1:23 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check it again 🥲 June 18, 2025 at 1:29 AM, Csanálosi Gábor FA : @VK (mcs) can you pls refresh mcs error info on C1STKC71? Its i red but no errors there. June 18, 2025 at 1:29 AM, Csanálosi Gábor FA : in* June 18, 2025 at 1:33 AM, Csanálosi Gábor FA : Thanks, its green now! June 18, 2025 at 1:33 AM, VK (mcs) : Anytime June 18, 2025 at 1:33 AM, 이도형 (Lee) : @FA Nc An agv full magazine check please 2-2 June 18, 2025 at 1:41 AM, 김지수PM(Gyuri)_FA : AGV들이 바빠서 해당 포트 잡이 할당되지 못 했고, 지금 priority 조정으로 agv할당 받았습니다. June 18, 2025 at 1:49 AM, 김지수PM(Gyuri)_FA : 5-3 MA4213 UR 23:53pm > 6호기 할당받아서 가고있습니다. June 18, 2025 at 2:07 AM, VK (mcs) : @FA Anode Pre-STK A71 port 20. Can you check is there an actual Carrier? SCS shows UNK id. June 18, 2025 at 2:08 AM, Csanálosi Gábor FA : Checking June 18, 2025 at 2:10 AM, Csanálosi Gábor FA : MLA6228 on p20 June 18, 2025 at 2:12 AM, Csanálosi Gábor FA : Want me to try modify? June 18, 2025 at 2:12 AM, VK (mcs) : Can you please remove it manually? Or modify the SCS? June 18, 2025 at 2:13 AM, VK (mcs) : As I see it's UNKDUP ID in SCS, it is better to remove and restored from manual port. June 18, 2025 at 2:14 AM, Csanálosi Gábor FA : Success June 18, 2025 at 2:14 AM, 이도형 (Lee) : @FA C1STKC71 LOAD OVERSIZE ERROR June 18, 2025 at 2:14 AM, Csanálosi Gábor FA : Coming June 18, 2025 at 2:16 AM, Csanálosi Gábor FA : Saw this too late, can you check the status? June 18, 2025 at 2:17 AM, VK (mcs) : It was full? Or empty? June 18, 2025 at 2:17 AM, Csanálosi Gábor FA : Full June 18, 2025 at 2:18 AM, VK (mcs) : So probably it has another ID, Did you check both side's ID? June 18, 2025 at 2:20 AM, Csanálosi Gábor FA : Done June 18, 2025 at 2:21 AM, Csanálosi Gábor FA : Let me check now June 18, 2025 at 2:22 AM, Csanálosi Gábor FA : Both side same id. But all empty, sry, the other plate is full on p19 June 18, 2025 at 2:23 AM, VK (mcs) : Ahh I see. Thank you so much June 18, 2025 at 2:23 AM, Csanálosi Gábor FA : Thank you and sry for confusing you. 😅 June 18, 2025 at 2:26 AM, Debreczeni Ármin : AGV's didnt take empty magazines from line 3 stacking June 18, 2025 at 2:27 AM, VK (mcs) : Can you tell me which equipment? June 18, 2025 at 2:31 AM, Debreczeni Ármin : 127 130 134 135 June 18, 2025 at 2:33 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:172 GF NC reel Available :- • AN: 00 • CA: 281 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 01 Load request(Exist Jobs) .Anode:10 .Cathode:02 Load request waiting for materials: Anode:80 Cathode:92 June 18, 2025 at 2:37 AM, VK (mcs) : Sorry I can't see these IDs, But machines 50/60/90/100/130/140/170 All of them, one of the ports is empty in MCS. Can you Modi them? June 18, 2025 at 2:40 AM, Debreczeni Ármin : We try June 18, 2025 at 3:53 AM, Nauman/Ivancsa FA : 1. Time : 3:51 2. Machine : GF NC CA ROBOT #3 3. Port : 8028 4. Plate : MLC3060 5. Work Process : deleted June 18, 2025 at 4:00 AM, 김지수PM(Gyuri)_FA : @fa please check 6030(c1stka71 p20 op01) track > h/s off This is causing half chamber 3-3 about 3hours🥲 June 18, 2025 at 4:08 AM, VK (mcs) : FYI The reason of delay: there was an UNK carrier on the port (MLA6228) which it doesn't indicate in MCS, one hour ago that carrier was fixed by FA technicians. And now it has H/S off issue. June 18, 2025 at 4:10 AM, Takács Ádám FA Tech : Vizsgáljuk a helyzetet June 18, 2025 at 4:12 AM, Lan Nhi : @FA plz help me unload the goods at machine 37(5-1) VD.An June 18, 2025 at 4:15 AM, 김지수PM(Gyuri)_FA : VC04 VC07 were assigned for this job June 18, 2025 at 4:15 AM, Takács Ádám FA Tech : @mcs Nem találjuk a probléma forrását June 18, 2025 at 4:17 AM, VK (mcs) : Do you mean anode STKA71 port 20? June 18, 2025 at 4:20 AM, Böröcz Tamás : Yes June 18, 2025 at 4:22 AM, VK (mcs) : Well due to delay, system automatically resolved it. Currently that carrier has job to Post-STK. I will monitor the port and let see it will happen for next carriers or not. Thx June 18, 2025 at 4:23 AM, 김지수PM(Gyuri)_FA : Someone aborted job for MLA4056 June 18, 2025 at 4:24 AM, VK (mcs) : Yes I see. And now it assigned to another machine June 18, 2025 at 4:26 AM, Böröcz Tamás : Nincs mit June 18, 2025 at 4:26 AM, Böröcz Tamás : Ha szarul néz ki de működik akkor működik June 18, 2025 at 4:30 AM, Debreczeni Ármin : @VK (mcs) send me new lot quantity please thank you June 18, 2025 at 4:33 AM, VK (mcs) : I reset the port and now it’s working properly. June 18, 2025 at 4:40 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 13 • Cathode:187 GF NC reel Available :- • AN: 00 • CA: 301 ///////////////////////////////////////// VD Unload request .Anode: 14 .Cathode: 04 Load request(Exist Jobs) .Anode:14 .Cathode:00 Load request waiting for materials: Anode:66 Cathode:116 June 18, 2025 at 5:06 AM, 김지수PM(Gyuri)_FA : @fa please check c1stka71 m01 op01 (6023) > input H/S off June 18, 2025 at 5:07 AM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. June 18, 2025 at 5:07 AM, Debreczeni Ármin : Post STk AN reached the 30 plate? June 18, 2025 at 5:08 AM, Csanálosi Gábor FA : Atm i am busy with a52 ready iff during forking error June 18, 2025 at 5:12 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa please check VC06 AN VD June 18, 2025 at 5:18 AM, VK (mcs) : It was 13 , do you want me to check it again? June 18, 2025 at 5:19 AM, Debreczeni Ármin : Please share it around 05:30 June 18, 2025 at 5:19 AM, Csanálosi Gábor FA : Now it seems ok to me June 18, 2025 at 5:20 AM, 김지수PM(Gyuri)_FA : There is no input HS ready signal in that port June 18, 2025 at 5:21 AM, 김지수PM(Gyuri)_FA : Could you please manual > Auto change? June 18, 2025 at 5:21 AM, Csanálosi Gábor FA : Going there, and check June 18, 2025 at 5:23 AM, Csanálosi Gábor FA : Tried, any success? June 18, 2025 at 5:24 AM, 김지수PM(Gyuri)_FA : Unfortunately nope 🥲 June 18, 2025 at 5:26 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 20 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 33 • Cathode:191 GF NC reel Available :- • AN: 00 • CA: 318 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 09 Load request(Exist Jobs) .Anode:06 .Cathode:04 Load request waiting for materials: Anode:70 Cathode:121 June 18, 2025 at 5:33 AM, Nauman/Ivancsa FA : 1. Time : 05:25 2. Machine : GF NC CA ROBOT #3 3. Port : 8028 4. Plate : MLC2036 5. Work Process : added June 18, 2025 at 6:07 AM, Yon Ko/연커/ : @Fa Tech Good morning NC AN ROBOT#3 GRIPPER2 Champing moving time over error. Check it. Thank u! June 18, 2025 at 6:07 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 13 Tech, 1 SL Beteg: 1 Szabadságon: 0 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Cehmann Zsolt Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Skwarek Tibor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 18, 2025 at 6:08 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.18 Time: 06:00~ 18:00 1.Assy 이민재(Lee minjae) June 18, 2025 at 6:14 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 24 • Cathode:184 GF NC reel Available :- • AN: 00 • CA: 333 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:06 .Cathode:04 Load request waiting for materials: Anode:58 Cathode:122 Thank you very much! June 18, 2025 at 6:31 AM, Baek Hojong(백호종)FA : dayshift FA Schedule Date: 2025.06.18 Time: 06:00~ 18:00 1. 백호종PM Baek Hojong 2. Assy 이민재(Lee minjae) June 18, 2025 at 7:28 AM, QuangPhan : Good morning! @Mohammad Amir What is the supply issue of NC AN Reel?. We are running out of reels for production. Please checking. Thank you! June 18, 2025 at 7:29 AM, Mohammad Amir : Good morning, Unfortunately we don't have any Anode reels currently. Thank you very much! June 18, 2025 at 7:55 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 05 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 36 • Cathode:168 GF NC reel Available :- • AN: 00 • CA: 338 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:74 Cathode:121 Thank you very much! June 18, 2025 at 8:06 AM, QuangPhan : Hello! @FA Could you please transfet these plates in VD AN 6/9 #54 to KA72 . The chamber has Upper/ left heater _NFB OFF State.Thank you June 18, 2025 at 8:07 AM, Mohammad Amir : Hello, Sure ,I will transfer it, please make the chamber in Auto mode afterwards command created from MCS can proceed. Currently Chamber is OOS. Thank you very much! June 18, 2025 at 8:08 AM, Sazzad Bhai SKon : @FA Please check the following duplicated plates: C1STKA71 (Shelf: 0200407, 0200306, 0104904, 0104702, 0204703) C1STKC72 (Shelf: 0205905) June 18, 2025 at 8:40 AM, Mohammad Amir : @FA @Nagy Tamás FA Please confirm,is there any maintenance on E0STKC51? Currently it is disconnected and several jobs are pending because of this. Thank you very much! June 18, 2025 at 8:42 AM, QuangPhan : Done June 18, 2025 at 8:43 AM, Mohammad Amir : Thank you,I am working on it. June 18, 2025 at 8:43 AM, Mohammad Amir : @QuangPhan June 18, 2025 at 8:45 AM, QuangPhan : Thank you June 18, 2025 at 8:46 AM, Mohammad Amir : Jobs have been created successfully to tramsfer materials from VD AN 6-9 to Post VD STK ✅. AGV#8 & #3 has been assigned successfully ✅. I am monitoring for smooth delivery. Thank you very much! June 18, 2025 at 8:48 AM, Mohammad Amir : @FA @Farkas Tamàs Please assign someone to check this ,issue Currently E0STKC51 is disconnected (Not Auto) and because of this several jobs are pending. Thank you very much! June 18, 2025 at 8:52 AM, 안종수 : NC AN #6 AGV Error. Please check @FA June 18, 2025 at 8:55 AM, Skwarek Tibor : Checked before. There was a magazine in the machine and agv culdn t unload. Now it s ok. June 18, 2025 at 8:58 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 18, 2025 at 8:58 AM, Mohammad Amir : Sure Sir, checking. June 18, 2025 at 9:00 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 09 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 33 • Cathode:168 GF NC reel Available :- • AN: 00 • CA: 336 ///////////////////////////////////////// VD Unload request .Anode: 11 .Cathode: 01 Load request(Exist Jobs) .Anode:08 .Cathode:04 Load request waiting for materials: Anode:60 Cathode:121 Thank you very much! June 18, 2025 at 10:09 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check E0STKA52_C01 there is SCP safety relay power trip error. Thank you! June 18, 2025 at 10:13 AM, Tuya Ivancsa FA : @최정한.KOVA the VD CA chamber 10 (ready on time) pls check June 18, 2025 at 10:13 AM, Simon Attila F. A. : This message was deleted. June 18, 2025 at 10:22 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 02 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 63 • Cathode:171 GF NC reel Available :- • AN: 00 • CA: 354 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:00 .Cathode:02 Load request waiting for materials: Anode:68 Cathode:129 Thank you very much! June 18, 2025 at 10:43 AM, 최정한.KOVA : 확인 후 조치완료했습니다. 정상가동중입니다. June 18, 2025 at 11:13 AM, Mohammad Amir : @FA @Nagy Tamás FA Please check C1STKA71_C02 there is Load Oversize error(Left). Thank you very much! June 18, 2025 at 11:19 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0CNVC52_RTV01,it is in Manual mode , hence it is OOS and reels delivery has stopped. Thank you very much! June 18, 2025 at 11:24 AM, Kertész Dániel : Done June 18, 2025 at 11:26 AM, Mohammad Amir : Köszönom szepen 🙏 June 18, 2025 at 11:44 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 03 • Cathode: 05 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 68 • Cathode:157 GF NC reel Available :- • AN: 00 • CA: 338 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 04 Load request(Exist Jobs) .Anode:00 .Cathode:02 Load request waiting for materials: Anode:104 Cathode:125 Thank you very much! June 18, 2025 at 12:04 PM, Mohammad Amir : @FA @Kertész Dániel Please check C1STKC71_C02 there is Load Oversize error(Left). Thank you very much! June 18, 2025 at 12:05 PM, Skwarek Tibor : Checking June 18, 2025 at 12:11 PM, QuangPhan : Hello @FA NC AN AGV #9 error. Thanks June 18, 2025 at 12:28 PM, Pavel : @FA AGV 2 stopped opposite 2/16 machine, please fix it Thank you June 18, 2025 at 12:40 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 04 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 73 • Cathode:151 GF NC reel Available :- • AN: 00 • CA: 337 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 09 Load request(Exist Jobs) .Anode:00 .Cathode:04 Load request waiting for materials: Anode:108 Cathode:113 Thank you very much! June 18, 2025 at 1:06 PM, 원재 : Please check Nc Ca agv#2 June 18, 2025 at 1:08 PM, 원재 : Please check NC Ca AGV#9 June 18, 2025 at 1:34 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 03 • Cathode: 08 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 78 • Cathode:140 GF NC reel Available :- • AN: 00 • CA: 335 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 07 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:112 Cathode:113 Thank you very much! June 18, 2025 at 2:07 PM, Mohammad Amir : @FA Please check C1CNV072_16_126 there is INV-01 Run time Over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you! June 18, 2025 at 2:10 PM, Mohammad Amir : @Manufacturing @QuangPhan Please give me confirmation ,is there any carrier actually exists on VD AN 3-9 P03? Thank you very much! June 18, 2025 at 2:10 PM, Pavel : @FA AGV is very slow in transporting material to line 2 and 3, although there is enough material in the warehouse, what is the reason? June 18, 2025 at 2:10 PM, Zaya/ivancsa FA : This message was deleted. June 18, 2025 at 2:10 PM, Zaya/ivancsa FA : solved June 18, 2025 at 2:11 PM, Yon Ko/연커/ : Everything is normally working now. June 18, 2025 at 2:11 PM, Mohammad Amir : There was issue with the C1CNV072 which blocked the stacking materials delivery. Now everything is okay ✅ I am monitoring. Thank you very much! June 18, 2025 at 2:11 PM, Mohammad Amir : Thank you very much! June 18, 2025 at 2:12 PM, Pavel : Got it, thanks for the information June 18, 2025 at 2:12 PM, Mohammad Amir : You are welcome! June 18, 2025 at 2:15 PM, Mohammad Amir : @QuangPhan @Manufacturing Please press LR for VD CA 5-3 P01/02 there is Half chamber situation. Thank you very much! June 18, 2025 at 2:16 PM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_144 there is INV-01 Run time Over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you! June 18, 2025 at 2:17 PM, Mohammad Amir : @FA @Skwarek Tibor Please check E0STKA51_C01/C02 there is Light curtain error. Thank you very much! June 18, 2025 at 2:18 PM, QuangPhan : I will forward the information to SL. CA June 18, 2025 at 2:24 PM, Mohammad Amir : Thank you very much! June 18, 2025 at 2:27 PM, Mohammad Amir : @FA Please check C1STKC72_C02 there is Load Oversize error,it has stopped CA stacking materials delivery. Please check the issue on priority as there is lack of materials on stacking lines. Thank you very much! June 18, 2025 at 2:30 PM, Mohammad Amir : @Manufacturing Please give me confirmation ,is there any carrier actually exists on VD AN 3-9 P03? Thank you very much! June 18, 2025 at 2:38 PM, Skwarek Tibor : Done June 18, 2025 at 2:38 PM, Mohammad Amir : Köszönom szepen 🙏 June 18, 2025 at 2:39 PM, Skwarek Tibor : Szívesen June 18, 2025 at 2:52 PM, Tuya Ivancsa FA : @최정한.KOVA the VD AN chamber 27 (LD/ UD ) error pls check June 18, 2025 at 3:28 PM, 원재 : Please check NC An AGV#7 June 18, 2025 at 4:17 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 12 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 66 • Cathode:138 GF NC reel Available :- • AN: 04 • CA: 317 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:04 .Cathode:00 Load request waiting for materials: Anode:92 Cathode:112 Thank you very much! June 18, 2025 at 4:26 PM, Yon Ko/연커/ : @Fa tech NC AN ROBOT2 operation MGZ Detect sensor error check it. Thank u! June 18, 2025 at 4:38 PM, QuangPhan : Hello! @FA Could you please transfet these plates in VD AN 5-1 #37 to KA72 .We will start testing .Thank you! June 18, 2025 at 4:39 PM, Sazzad Bhai SKon : I see chamber is still in-service. I'll transfer by MCS June 18, 2025 at 4:41 PM, QuangPhan : Thank you June 18, 2025 at 5:16 PM, Mohammad Amir : @FA @Skwarek Tibor Please check C1CNV072_16_049 there is Run time error and it is blocking stacking materials delivery to line -4&5&6. Please check the issue on priority. Thank you very much! June 18, 2025 at 5:28 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 19 • Cathode: 28 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 69 • Cathode:117 GF NC reel Available :- • AN: 01 • CA: 311 ///////////////////////////////////////// VD Unload request .Anode: 05 .Cathode: 08 Load request(Exist Jobs) .Anode:02 .Cathode:04 Load request waiting for materials: Anode:104 Cathode:112 Thank you very much! June 18, 2025 at 5:45 PM, 김희래 : @FA GF NC CA AGV#10 is stopped due to obstacle. Please check. It is nearby line#6. June 18, 2025 at 5:56 PM, 김희래 : @FA 7 AGVs are stopped. Please check. June 18, 2025 at 5:57 PM, Mohammad Amir : @FA Please check NC CA AGV#5 it is blocking other AGVs and resulting in delay of empty trays delivery. Thank you very much! June 18, 2025 at 6:01 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/13 Overtime (1):Böröcz Tamás Sick (0):- Holiday (1): Kovács Szabolcs, Magyar Balázs Shift change(0): Elektróda:(4) Szabadi Miklós, Oláh András , Kiss Balázs , Böröcz Tamás Assembly(5): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 18, 2025 at 6:14 PM, 이도형 (Lee) : @FA VD Ca #1 AGV is stopped. Please check. June 18, 2025 at 6:17 PM, 이도형 (Lee) : 지속적인 에러 알람 발생 June 18, 2025 at 6:47 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 36 • Cathode: 51 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 30 • Cathode:74 GF NC reel Available :- • AN: 00 • CA: 312 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 00 Load request(Exist Jobs) .Anode:04 .Cathode:00 Load request waiting for materials: Anode:48 Cathode:68 Thank you June 18, 2025 at 7:03 PM, Jun(정우준)_SKOH FA : @aasy GF VD AN 2/3호기 LD/UD알람지속발생중입니다. 해당 호기 OOS후 점검 부탁드립니다. June 18, 2025 at 7:10 PM, Dariimaa/다리마/Ivancsa : @MCS good evening VD AN AGV#9 idle. Please check Thank you! June 18, 2025 at 7:10 PM, Shakir (MCS) : Checking June 18, 2025 at 7:12 PM, Shakir (MCS) : Issue has been resolved ✅ AGV started to move Thank you June 18, 2025 at 7:18 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 36 • Cathode: 54 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 54 • Cathode:69 GF NC reel Available :- • AN: 00 • CA: 310 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 05 Load request(Exist Jobs) .Anode:06 .Cathode:00 Load request waiting for materials: Anode:91 Cathode:108 Thank you June 18, 2025 at 7:19 PM, Nguyen Huy : @MCS Hello, VD CA 5-1 and 5-3 half chamber occurred, pls check June 18, 2025 at 7:19 PM, Shakir (MCS) : Checking June 18, 2025 at 7:21 PM, Shakir (MCS) : LR received successfully but No material available. Thank you June 18, 2025 at 7:26 PM, Shakir (MCS) : @FA Please check C1STKA71_C02 there is Load Oversize error(Left). Thank you June 18, 2025 at 7:37 PM, Novák Károly F. A. : Solved June 18, 2025 at 7:40 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) VD AN chamber 1-9 empty. Please delete AGV#2 job. Thank you! June 18, 2025 at 7:40 PM, Shakir (MCS) : On it June 18, 2025 at 7:43 PM, Shakir (MCS) : Job Cancelled ✅ Thank you June 18, 2025 at 7:50 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) VD AN AGV#5 idle. Please check Thank you! June 18, 2025 at 7:51 PM, Shakir (MCS) : Checking June 18, 2025 at 7:53 PM, Shakir (MCS) : Solved, AGV moving now ✅ Thanks June 18, 2025 at 8:41 PM, 권기홍 : @FA GF AN NC VC10 is in Error State for long time. Check Please. June 18, 2025 at 8:41 PM, 권기홍 : Cleared June 18, 2025 at 8:42 PM, 권기홍 : Error again June 18, 2025 at 8:42 PM, Dariimaa/다리마/Ivancsa : @Ankhaa/Ivancsa FA pls check June 18, 2025 at 8:52 PM, Shakir (MCS) : Hello Sir, @Jun(정우준)_SKOH FA There’s a repeated issue with AGV10 on the NC AN line showing the alarm “ODSL#1 Value Out.” It started around 17:41 and still now 30+ same alarm/error appeared .Causing traffic jams. AGV10 needs to be check. Thank you June 18, 2025 at 8:53 PM, Dániel Hufnágel : We will check it June 18, 2025 at 9:14 PM, Jun(정우준)_SKOH FA : thanks. can you check it after line out? June 18, 2025 at 9:17 PM, P.Bence A SSL : Check again please thank you ! June 18, 2025 at 9:19 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 48 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 41 • Cathode:82 GF NC reel Available :- • AN: 00 • CA: 293 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode:04 .Cathode:00 Load request waiting for materials: Anode:99 Cathode:96 Thank you June 18, 2025 at 9:25 PM, Dániel Hufnágel : What do you mean? June 18, 2025 at 9:26 PM, Jun(정우준)_SKOH FA : i mean "AGV 동선을 Block 하지 않게, Line out 후에, 점검 할 수 있나요??" @Noémi (소미) June 18, 2025 at 9:29 PM, Noémi (소미) : Úgy értem, hogy " az AGV hogy az útvonalat ne Blockkolja, nem lehetne-e kivenni először termelésből és utána elvégezni az ellenőrzést??" June 18, 2025 at 9:29 PM, 카스텔 발라지 F.A. : Nem tudjuk ellenőrizni az ODSL értékeket és offsetelni a megfelelő irányba, ha nincs ott a problémás node-on June 18, 2025 at 9:32 PM, Noémi (소미) : 해당 AGV가 문제 있는 노드 말고 다른 위치에 배치되어 있으면 ODSL 값 확인 및 올바른 방향으로 offset이 진행할 수 없습니다. June 18, 2025 at 9:33 PM, Jun(정우준)_SKOH FA : oh okay. thanks June 18, 2025 at 10:54 PM, Nguyen Huy : @FA Hello, NC CA 1/2 Out C/V 02-SH(L) origin loss error, pls check June 18, 2025 at 10:54 PM, Novák Károly F. A. : Checking June 18, 2025 at 10:57 PM, Nguyen Huy : Pls check this again, it's long time and it hasn't been solve, thanks @Shakir (MCS) June 18, 2025 at 10:58 PM, Shakir (MCS) : Currently A52 cranes are too busy. June 18, 2025 at 11:04 PM, Novák Károly F. A. : Solved June 18, 2025 at 11:21 PM, 이도형 (Lee) : @FA VD An #3 AGV is stopped. Please check. June 18, 2025 at 11:22 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa @Chinges Fa please check if ld ud alarm please let me know June 18, 2025 at 11:23 PM, Dariimaa/다리마/Ivancsa : Solved June 19, 2025 at 12:04 AM June 19, 2025 at 12:04 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 52 • Cathode: 42 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 33 • Cathode:63 GF NC reel Available :- • AN: 01 • CA: 283 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 03 Load request(Exist Jobs) .Anode:02 .Cathode:08 Load request waiting for materials: Anode:97 Cathode:84 Thank you June 19, 2025 at 12:52 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 53 • Cathode: 37 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 26 • Cathode:50 GF NC reel Available :- • AN: 05 • CA: 286 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 19 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:85 Cathode:72 Thank you June 19, 2025 at 1:01 AM, Nguyen Huy : @FA @MCS Pls request AGV to take out materials from chamber 5-9 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 19, 2025 at 1:08 AM, Shakir (MCS) : Job has been initiated for VD CA 5-9 Thank you June 19, 2025 at 1:37 AM, P.Bence A SSL : L2 stacking Agv 2 stop please check thank you . June 19, 2025 at 1:55 AM, Natsag/ Ivansca FA : VD CA chamber 5-9 empty. Please delete AGV#8 job. June 19, 2025 at 1:56 AM, Natsag/ Ivansca FA : @Shakir (MCS) June 19, 2025 at 2:01 AM, Shakir (MCS) : Job cancelled June 19, 2025 at 2:02 AM, Natsag/ Ivansca FA : @Shakir (MCS) VD CA chamber 5-9 empty. Please delete AGV#6 job. June 19, 2025 at 2:02 AM, Shakir (MCS) : Already cancelled June 19, 2025 at 2:06 AM, Natsag/ Ivansca FA : thank you June 19, 2025 at 2:14 AM, Ankhaa/Ivancsa FA : @Shakir (MCS) VD CA chamber 5-9 empty. Please delete AGV#8 job. June 19, 2025 at 2:17 AM, Shakir (MCS) : 5-9 job already cancelled June 19, 2025 at 2:19 AM, Chinges Fa : @Shakir (MCS) VD CA chamber 5-9 empty. Please delete AGV#10 job. June 19, 2025 at 2:19 AM, Shakir (MCS) : @FA Please check E0STKC51_C01 crane not moving for long time June 19, 2025 at 2:20 AM, Shakir (MCS) : @Zsurbej Zsolt F.A. @Novák Károly F. A. June 19, 2025 at 2:21 AM, Novák Károly F. A. : Checking June 19, 2025 at 2:21 AM, Shakir (MCS) : Now started work June 19, 2025 at 2:23 AM, Chinges Fa : Is there empty June 19, 2025 at 2:23 AM, Shakir (MCS) : This message was deleted. June 19, 2025 at 2:24 AM, Shakir (MCS) : Checking June 19, 2025 at 2:25 AM, Shakir (MCS) : There is no job for 5-9 CA chamy June 19, 2025 at 2:25 AM, Shakir (MCS) : Chamber** June 19, 2025 at 2:27 AM, Shakir (MCS) : I have cancelled from MCS but still showing ACS delete it from ACS please June 19, 2025 at 3:04 AM, Shakir (MCS) : @FA Please check STKA52_C02 not moving. Thank you June 19, 2025 at 3:06 AM, Jun(정우준)_SKOH FA : because there are no jobs for STK A52_C02 June 19, 2025 at 3:12 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 42 • Cathode: 37 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 09 • Cathode:50 GF NC reel Available :- • AN: 01 • CA: 256 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 01 Load request(Exist Jobs) .Anode:12 .Cathode:04 Load request waiting for materials: Anode:73 Cathode:68 Thank you June 19, 2025 at 3:30 AM, Nguyen Huy : @FA @MCS Hello, pls request AGV to take out materials from chamber 3-7 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 19, 2025 at 3:31 AM, Jun(정우준)_SKOH FA : @aasy GF VD AN 1-2호기 LD/UD알람지속발생중입니다. 해당 호기 OOS후 점검 부탁드립니다. June 19, 2025 at 3:32 AM, Shakir (MCS) : Currently not in Auto mode, chamber is out of service. June 19, 2025 at 3:33 AM, Nguyen Huy : Sorry, I'll switch it back now June 19, 2025 at 3:34 AM, Shakir (MCS) : Okay thanks, then I will create job June 19, 2025 at 3:45 AM, Shakir (MCS) : Job initiated June 19, 2025 at 3:47 AM, Shakir (MCS) : @Fa Please check E0STKC52_C01 Port interface error. Thank you June 19, 2025 at 3:50 AM, 카스텔 발라지 F.A. : Solved June 19, 2025 at 3:53 AM, Nguyen Huy : @Shakir (MCS) VD AN 1-2 half chamber occurred, pls check June 19, 2025 at 3:58 AM, Shakir (MCS) : Press LR, Currently chamber not in Auto mode/OOS. June 19, 2025 at 3:59 AM, Nguyen Huy : Mode changed, pls check June 19, 2025 at 4:00 AM, Shakir (MCS) : LR received successfully, Thanks June 19, 2025 at 4:17 AM, Shakir (MCS) : @FA Please check C1CNV071_12_035 Data loss error. Thank you June 19, 2025 at 4:59 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV01 is OOS. Thank you June 19, 2025 at 5:02 AM, Novák Károly F. A. : Checking June 19, 2025 at 5:50 AM, P.Bence A SSL : Check again please June 19, 2025 at 5:52 AM, Mohammad Amir : Sure,checking. June 19, 2025 at 5:53 AM, Nguyên : CA NC GF ROBOT#3 ERROR Come for me June 19, 2025 at 5:57 AM, F.A.briczius Gergő : On way June 19, 2025 at 5:58 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 52 • Cathode: 62 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 14 • Cathode:29 GF NC reel Available :- • AN: 00 • CA: 235 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:02 .Cathode:00 Load request waiting for materials: Anode:58 Cathode:60 Thank you! June 19, 2025 at 6:10 AM, F.A.briczius Gergő : Done June 19, 2025 at 6:10 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_P11/P12 it is OOS because of light curtain error and because of this there is blockage of stacking materials delivery. Thank you very much! June 19, 2025 at 7:54 AM, Baek Hojong(백호종)FA : Day Shift 06.19 06:00 - 18:00 백호종 Baek hojong PM Assy Choi myungwoon Assy Kim junghee June 19, 2025 at 7:55 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_107 ,there is Data Mismatch error and because of thisstacking materials delivery has stopped. Thank you very much! June 19, 2025 at 7:57 AM, Yon Ko/연커/ : Solved. June 19, 2025 at 8:02 AM, QuangPhan : Hello! @Mohammad Amir VD AN 1-2 #02 VD AN 1-9 #09 VD AN 2-3 #12 Half chamber occurred, pls check. Thanks June 19, 2025 at 8:02 AM, Mohammad Amir : Sure, checking! June 19, 2025 at 8:05 AM, Mohammad Amir : For 2-3 VD AN, Issue has been resolved ✅ Jobs have been created for half chamber. For 1-2 VD AN, There is an active LR exists however currently no material available. For 1-9 VD AN, Please confirm me which carriers actually exists on P03 and P04? Thank you very much! June 19, 2025 at 8:08 AM, Dima Kusyk : Good morning, everyone! Please share updated information. Thank you! June 19, 2025 at 8:08 AM, Mohammad Amir : Sure checking! June 19, 2025 at 8:11 AM, QuangPhan : 1-9 The left chamber is empty. June 19, 2025 at 8:14 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 58 • Cathode: 51 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 14 • Cathode:37 GF NC reel Available :- • AN: 00 • CA: 189 ///////////////////////////////////////// VD Unload request .Anode: 07 .Cathode: 12 Load request(Exist Jobs) .Anode:06 .Cathode:06 Load request waiting for materials: Anode:56 Cathode:92 Thank you! June 19, 2025 at 8:15 AM, Mohammad Amir : @Zaya/ivancsa FA Please check VD AN AGV#6 there is Cargo status abnormal error. Thank you! June 19, 2025 at 8:18 AM, Mohammad Amir : Issue has been resolved ✅ Please press LR for VD 1-9 AN P03/04 as well there is half chamber situation. Thank you very much! June 19, 2025 at 8:23 AM, Pavel : @FA AGV 8 stopped opposite 2/5, please fix it Thank you June 19, 2025 at 8:41 AM, F.A.briczius Gergő : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 11 Tech, 0 SL Beteg: 1 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Skwarek Tibor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Nagy Tamás ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 19, 2025 at 8:48 AM, Mohammad Amir : @FA Please check E0STKC52_C01 there is MCP Auto/Manual Mode error. Thank you! June 19, 2025 at 8:49 AM, Kertész Dániel : This message was deleted. June 19, 2025 at 8:49 AM, Kertész Dániel : Done June 19, 2025 at 9:26 AM, Mohammad Amir : @FA @Kertész Dániel Please check E0STKC52_C01 there is MCP Auto/Manual Mode error. Thank you! June 19, 2025 at 9:32 AM, Nagy Tamás FA : Done June 19, 2025 at 9:33 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 58 • Cathode: 54 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 02 • Cathode:39 GF NC reel Available :- • AN: 00 • CA: 169 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 09 Load request(Exist Jobs) .Anode:08 .Cathode:02 Load request waiting for materials: Anode:64 Cathode:88 Thank you! June 19, 2025 at 9:39 AM, Mohammad Amir : @FA Please check C1STKA71_P15/16 there is light curtain error and it is blocking transfer to VD AN 5-4. Thank you very much! June 19, 2025 at 9:45 AM, Sazzad Bhai SKon : @FA Please check the following duplicated plates: C1STKA71 (Shelf: 0200601, 0200602, 0203602, 0203701, 0203502) C1STKA72 (Shelf: 0105505) C1STKC72 (Shelf: 0205905) June 19, 2025 at 9:47 AM, QuangPhan : Hello! @Mohammad Amir Qc will do calibration work on VD in the afternoon. Please stop and empty below VD machines until 13:00. Thank you! Anode 2-8 2-9 3-1 Cathode 3-3 Temp sensor Anode 1-2 Cathode 2-9 Thank you so much! June 19, 2025 at 9:48 AM, Mohammad Amir : Hello, Sure , working on it. Thank you! June 19, 2025 at 9:53 AM, Zaya/ivancsa FA : @Mohammad Amir hello, Can you delete job GF NC AN AGV2 , Port has a materials June 19, 2025 at 9:53 AM, Mohammad Amir : Sure, checking. June 19, 2025 at 9:53 AM, Sazzad Bhai SKon : @FA All the magazines of plate MLC1247 is duplicated. Location: C1STKC72 (0205603) Please confirm the magazines: MC1200, 4267, 6199, 4339, 3527, 3299) June 19, 2025 at 9:54 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! June 19, 2025 at 9:55 AM, Zaya/ivancsa FA : Thank u 🙏 June 19, 2025 at 10:00 AM, 김현태 : NC CA AGV #6 ERROR THANKS YOU June 19, 2025 at 10:00 AM, Selem /Ivancsa FA : @Amir(MCS) hello, Can you delete job GF NC AN AGV10 , Port has a materials June 19, 2025 at 10:00 AM, Mohammad Amir : Sure, checking June 19, 2025 at 10:01 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! June 19, 2025 at 10:02 AM, Mohammad Amir : Jobs have been created to manually travel VD AN 2-8,2-9,3-1 to Post VD STK successfully ✅. I am working on the rest. Thank you very much! June 19, 2025 at 10:07 AM, 최명운(CHOI MYOUNGWOON) : @Mohammad Amir Can you move the cargo of GF NC AN AGV#2,10 to Line 6 3-P03 and Line 6 2-P04? June 19, 2025 at 10:08 AM, Mohammad Amir : Checking June 19, 2025 at 10:08 AM, 최명운(CHOI MYOUNGWOON) : This message was deleted. June 19, 2025 at 10:09 AM, 최명운(CHOI MYOUNGWOON) : 6line 3-3 is moving cargo AGV#5 June 19, 2025 at 10:09 AM, Mohammad Amir : Sir, There is already a job exists for line 6-3 P03,it just completed. I will suggest to send these magazine back to STK and afterwards it will come automatically. Thank you very much! June 19, 2025 at 10:14 AM, Mohammad Amir : Sir, Please let me know should I transfer Magazine on AGV#2 And AGV#10 back to warehouse? It is in Idle state ,it may cause traffic in future. Thank you very much! June 19, 2025 at 10:14 AM, QuangPhan : Please transfet these plates more 1-2 #02 to warehouse A72 . Sensor is error. Thanks June 19, 2025 at 10:14 AM, QuangPhan : @Mohammad Amir June 19, 2025 at 10:14 AM, Mohammad Amir : Sure, Working on it. June 19, 2025 at 10:15 AM, 최명운(CHOI MYOUNGWOON) : @Mohammad Amir There is a cargo on GF NC AN Line 1 2-P03, but the AGV keeps transporting the cargo, causing problems. It seems there is a problem with the LR here. June 19, 2025 at 10:15 AM, Mohammad Amir : Sure , checking. June 19, 2025 at 10:18 AM, Mohammad Amir : Issue has been resolved ✅. Please let me know if you face any further issues. Thank you very much! June 19, 2025 at 10:19 AM, Mohammad Amir : Jobs have been created successfully ✅. I am working on the rest. Thank you very much! June 19, 2025 at 10:20 AM, Mohammad Amir : @최명운(CHOI MYOUNGWOON) Sir, Please let me know ,I need confirmation on these AGVs otherwise these AGVs will cause traffic. Thank you very much! June 19, 2025 at 10:23 AM, Mohammad Amir : All jobs have been created successfully to transfer to post VD STK ✅. I am monitoring. Thank you very much! June 19, 2025 at 10:31 AM, QuangPhan : Thank you so much! June 19, 2025 at 10:32 AM, Mohammad Amir : You are welcome. Feel free to contact me again if you need further assistance. June 19, 2025 at 10:36 AM, QuangPhan : Hello! @Mohammad Amir Could you please transfet these plates in VD AN 5-1 #37 to KA72 . Error temperature upper and lower limit setting value exceeded .The technicians repair machine start.Thank you June 19, 2025 at 10:36 AM, Mohammad Amir : Sure, checking! June 19, 2025 at 10:37 AM, Mohammad Amir : @FA Please check C1STKA72_C01/C02 there is Light curtain error and because of this there is shortages of Anode stacking materials. Please check the issue on priority. Thank you very much! June 19, 2025 at 10:38 AM, Mohammad Amir : Could you make the chamber in Auto mode, afterwards command created from MCS can be successful. Thank you! June 19, 2025 at 10:38 AM, 정다은 : @Mohammad Amir Dear, could you share current status? June 19, 2025 at 10:39 AM, Mohammad Amir : Sure Sir,checking. June 19, 2025 at 10:39 AM, QuangPhan : Done. June 19, 2025 at 10:39 AM, Mohammad Amir : Thank you, working on it. June 19, 2025 at 10:41 AM, 최명운(CHOI MYOUNGWOON) : This message was deleted. June 19, 2025 at 10:41 AM, 최명운(CHOI MYOUNGWOON) : @Amir (MCS) The cargo of AGV#2,10 has been put into the warehouse of GF AN KA71 June 19, 2025 at 10:42 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 71 • Cathode: 46 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 31 • Cathode:30 GF NC reel Available :- • AN: 00 • CA: 165 ///////////////////////////////////////// VD Unload request .Anode: 34 .Cathode: 09 Load request(Exist Jobs) .Anode:08 .Cathode:10 Load request waiting for materials: Anode:68 Cathode:76 Thank you! June 19, 2025 at 10:42 AM, Mohammad Amir : Thank you very much for the confirmation! June 19, 2025 at 10:42 AM, Yon Ko/연커/ : @mcs hello Since VD CA chamber 3-3 is closed, please cancel the AGV’s job. Thank you. June 19, 2025 at 10:43 AM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 2/8 chamber is closed , so please delete the AGV s job. Thank you. June 19, 2025 at 10:43 AM, Mohammad Amir : Sure, checking! June 19, 2025 at 10:43 AM, Mohammad Amir : Sure checking! June 19, 2025 at 10:45 AM, Mohammad Amir : Hello, I have created this job on the request of @QuangPhan because they want to investigate the chamber 3-3 VD CA. Are you sure,should I cancel these jobs? Thank you very much! June 19, 2025 at 10:46 AM, Mohammad Amir : Hello, I have created this job on the request of @QuangPhan because they want to investigate the chamber 2-8VD AN. Are you sure,should I cancel these jobs? Thank you very much! June 19, 2025 at 10:46 AM, Mohammad Amir : Jobs have been created to send these pallets to post VD STK successfully ✅. Thank you very much! June 19, 2025 at 10:50 AM, Mohammad Amir : @FA Please check C1STKA72_C01 there is now Loads Oversize error ,it is blocking Anode stacking materials delivery. Please check the issue on priority, production is getting affected. Thank you very much! June 19, 2025 at 10:51 AM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA Please confirm this. Thank you! June 19, 2025 at 10:54 AM, Nguyên : Pls request AGV come to chamber ( 3-7)-(5-5)-(5-9) CA VD GF for take out plate inside. We need to check chamber error. June 19, 2025 at 10:55 AM, Mohammad Amir : Sure,I will send these pallets to Post VD STK. Please first make these chambers to Auto mode. Thank you very much! June 19, 2025 at 10:59 AM, Nguyên : Ok. Thank you June 19, 2025 at 11:00 AM, Mohammad Amir : You are welcome! June 19, 2025 at 11:00 AM, Mohammad Amir : @FA Please check E0STKA51_C02 there is MCP AP error. Thank you very much! June 19, 2025 at 11:02 AM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 2/8 chamber is closed , so please delete the AGV s job. Thank you. June 19, 2025 at 11:02 AM, Mohammad Amir : Okay, working on it. June 19, 2025 at 11:03 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 19, 2025 at 11:03 AM, Mohammad Amir : Update :- VD AN 2-9 has been successfully unloaded ✅. I am monitoring. Thank you very much! June 19, 2025 at 11:05 AM, Zulaa/졸라/Ivancsa FA : @mcs hello Since VD CA chamber 2-9 is closed, please cancel the AGV’s job. Thank you. June 19, 2025 at 11:06 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 19, 2025 at 11:11 AM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 3/1 chamber is closed , so please delete the AGV s job. Thank you. June 19, 2025 at 11:14 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 19, 2025 at 11:34 AM, Zulaa/졸라/Ivancsa FA : @@최정한G.제어.한국진공 the VD AN chamber 1-2 Pls check, Thank you June 19, 2025 at 12:07 PM, Nguyên : The MGZ tray outlet of the GF 5/2 CA NC GF machine is faulty. Please come and fix it for me. June 19, 2025 at 12:22 PM, Kateryna SSL C : Hello @Mohammad Amir Could you please share available lot for GF? June 19, 2025 at 12:32 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 73 • Cathode: 18 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 06 • Cathode:36 GF NC reel Available :- • AN: 00 • CA: 131 ///////////////////////////////////////// VD Unload request .Anode: 51 .Cathode: 13 Load request(Exist Jobs) .Anode:16 .Cathode:12 Load request waiting for materials: Anode:54 Cathode:48 Thank you! June 19, 2025 at 12:49 PM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 1/2 chamber is empty, so please delete the AGV s job. Thank you. June 19, 2025 at 12:49 PM, Mohammad Amir : Sure checking June 19, 2025 at 12:50 PM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 19, 2025 at 12:53 PM, Zulaa/졸라/Ivancsa FA : @@최정한G.제어.한국진공 the VD AN chamber 5-1 Pls check,(Fork 1 ld/ud) Thank you. June 19, 2025 at 1:02 PM, Zaya/ivancsa FA : Pls delete job AGV10, Chamber is empty Thank you @Mohammad Amir June 19, 2025 at 1:02 PM, Mohammad Amir : Please inform me AN or CA? Thank you! June 19, 2025 at 1:03 PM, Zaya/ivancsa FA : VD AN SIDE,sorry June 19, 2025 at 1:08 PM, Mohammad Amir : Please cancel from ACS side from MCS and RTD side job cancelled failed. Thank you! June 19, 2025 at 1:13 PM, Kertész Dániel : @Mohammad Amir Hello! Can you check the reason of the "MCS data incomplete error" on the C0PVC020_P04? June 19, 2025 at 1:14 PM, Mohammad Amir : Sure , checking June 19, 2025 at 1:17 PM, Mohammad Amir : Hello, It's a CCS error, it means CCS didn't send data properly to MCS. Please check CCS side. Thank you very much! June 19, 2025 at 1:19 PM, Mohammad Amir : You can solve this issue from CCS side . Solution could be :- Firat install the carrier and after enter the magazine numbers of other magazine. Better to check with CCS . Thank you very much! June 19, 2025 at 1:22 PM, Kertész Dániel : Thank you so much! Now it’s good June 19, 2025 at 1:23 PM, Mohammad Amir : You are welcome! Feel free to ask me further information if you face any issues. June 19, 2025 at 1:24 PM, 최정한.KOVA : GF VD AN 4-3 P3,P4 AGV 수동 반송해주세요 June 19, 2025 at 1:25 PM, Mohammad Amir : Sir, Please confirm,You would like to transfer materials located at VD AN 4-3 P03/04 manually to STK? Thank you very much! June 19, 2025 at 1:31 PM, QuangPhan : @Mohammad Amir VD AN 2-8 #17 Drying is complete. Please create an AGV job to retrieve it. June 19, 2025 at 1:33 PM, QuangPhan : @FA VD AN AGV #2 error. Thanks June 19, 2025 at 1:33 PM, Mohammad Amir : Job has been created successfully ✅. However currently all the I/P ports of the Post VD STK are busy as soon a sit will be free two AGVs will come to pick the items. I am monitoring. Thank you very much! June 19, 2025 at 1:35 PM, QuangPhan : @Mohammad Amir Same VD AN 1-1 #01 June 19, 2025 at 1:35 PM, Mohammad Amir : Sure, checking! June 19, 2025 at 1:36 PM, Mohammad Amir : Job has been created successfully for this VD as well ✅. However currently all the I/P ports of the Post VD STK are busy as soon a sit will be free two AGVs will come to pick the items. I am monitoring. Thank you very much! June 19, 2025 at 1:36 PM, 최정한.KOVA : AGV 매뉴얼 반송 요청입니다. June 19, 2025 at 1:37 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA Please check this issue. Thank you very much! June 19, 2025 at 1:40 PM, 권기홍 : @FA GF NC CA VC09 is not moving Check plz. June 19, 2025 at 1:42 PM, 권기홍 : with no alarm June 19, 2025 at 1:48 PM, Selem /Ivancsa FA : Sir, 작업자들이 해당 장비를 수리하고 있습니다. June 19, 2025 at 1:58 PM, Lajos Tihor : Can You update please June 19, 2025 at 1:58 PM, Mohammad Amir : Sure , checking! June 19, 2025 at 2:00 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 03 • Cathode:61 GF NC reel Available :- • AN: 00 • CA: 113 ///////////////////////////////////////// VD Unload request .Anode: 56 .Cathode: 01 Load request(Exist Jobs) .Anode:14 .Cathode:08 Load request waiting for materials: Anode:52 Cathode:44 Thank you! June 19, 2025 at 2:02 PM, QuangPhan : @Mohammad Amir VD1-1 #01 -11:39 VD1-8 #08 -11:18 VD1-9 #09 -12:52 VD2-1 #10-11:34 VD2-8 #17-11:36 VD3-1 #19-12:49 VD3-2 #20-11:43 VD3-5 #23 -13:08 VD4-5 #32 -12:42 VD4-8 #35 -13:08 VD4-9 #36 -13:32 VD5-2 #38-12:08 VD6-1 #46 -12:29 VD 6-6 #51-12:33 VD 6-4 #49-12:01 Please check these chambers. The drying process is complete but the AGV has not performed the job to pick it up. June 19, 2025 at 2:02 PM, Mohammad Amir : Sure, checking. June 19, 2025 at 2:09 PM, Mohammad Amir : For VD AN , 1-1 , please make it Auto that is why jobs are not progressing. Thank you! June 19, 2025 at 2:11 PM, Mohammad Amir : For VD AN 1-8,2-1,3-2,4-9, Issue has been resolved and Chambers unloaded successfully ✅ For 5-2 VD AN, Issue has been resolved ✅. Also AGV#9 and #10 are currently unloading. Thank you very much! June 19, 2025 at 2:11 PM, 김현태 : VD CA AGV #8 error Thanks you June 19, 2025 at 2:15 PM, Mohammad Amir : For 6-2 VD AN, Issue has been resolved ✅. AGV#2 and #1 will do unloading. For 6-6, AGV #4 and #3 will unload. For 6-4 , Issue has also resolved ✅ AGV#5 will complete the unload. Checking the rest. Thank you very much! June 19, 2025 at 2:16 PM, Mohammad Amir : Please for 3-3 VD AN , Press UR . Thank you very much! June 19, 2025 at 2:19 PM, QuangPhan : Hello! @Mohammad Amir VD AN 5-4 #40 Half chamber occurred, pls check. Thanks June 19, 2025 at 2:19 PM, Mohammad Amir : Sure, checking! June 19, 2025 at 2:20 PM, QuangPhan : Done June 19, 2025 at 2:23 PM, Mohammad Amir : @FA Please check MLA6238 located at C1STKA71(P16_OP01) it has job to go to P16 but is not moving in SCS side it shows unloading completed status. Everything is good from MCS and RTD side ✅. Because MLA6238 not moving so it's batch job also not moving and resulting delay in material delivery to VD AN 5-4. Please take action. Thank you very much! June 19, 2025 at 2:23 PM, Mohammad Amir : Checking June 19, 2025 at 2:24 PM, Mohammad Amir : Perfect, VD AN 1-1 has also unloaded successfully ✅. Thank you very much! June 19, 2025 at 2:24 PM, QuangPhan : Thank you so much! June 19, 2025 at 2:25 PM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need further assistance. June 19, 2025 at 2:26 PM, Mohammad Amir : Please make VD AN 2-8 auto as well. It is blocking Unloading created jobs. Thank you very much! June 19, 2025 at 2:33 PM, QuangPhan : QC is performing inspection on this chamber. Please wait. June 19, 2025 at 2:33 PM, QuangPhan : Thanks June 19, 2025 at 2:33 PM, Mohammad Amir : Sure, thank you very much for! June 19, 2025 at 2:33 PM, 최명운(CHOI MYOUNGWOON) : MLA6238 cargo hadn't moved into position. It's solved now June 19, 2025 at 2:37 PM, Mohammad Amir : Update :- Issue has been resolved and now AGV#2 will bring materials for remiang half chamber of 5-4 VD AN✅. Thank you very much! June 19, 2025 at 2:39 PM, Mohammad Amir : Please for 3-5 VD AN, Press UR. Thank you very much! June 19, 2025 at 2:44 PM, Mohammad Amir : @QuangPhan Is QC also performing inspection on VD AN 3-1 ? Cause it is also in manual mode and created unloading jobs are pending. Thank you very much! June 19, 2025 at 2:53 PM, QuangPhan : Cheking June 19, 2025 at 2:54 PM, Zaya/ivancsa FA : VD CA Chamber#14 /2-5/ is empty, Can u delete job AGV6? @Mohammad Amir June 19, 2025 at 2:54 PM, Mohammad Amir : Sure, checking June 19, 2025 at 2:55 PM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 19, 2025 at 3:00 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+3 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 19, 2025 at 3:01 PM, 전 운 (Jeon Woon) : Due to long-term downtime of Line 1, we will change the stack station to manual. @FA @MCS June 19, 2025 at 3:02 PM, Mohammad Amir : Well Noted,Sir. Thank you very much! June 19, 2025 at 3:03 PM, QuangPhan : QC did not perform testing on this chamber. Auto turned back on June 19, 2025 at 3:09 PM, 김현태 : @FA Please send the plates in the VD CA 5-5 chamber to the warehouse June 19, 2025 at 3:13 PM, Kertész Dániel : This message was deleted. June 19, 2025 at 3:15 PM, Kertész Dániel : Sorry, but the FA can’t do this, because we don’t have any permission and our shift leader (who has permission) is on holyday. Please next time ask the MCS for these kind of jobs. @Mohammad Amir please transfer those plates, thank you! June 19, 2025 at 3:17 PM, Sazzad Bhai SKon : Transferred June 19, 2025 at 3:18 PM, Sazzad Bhai SKon : Hello Daniel, MCS can only transfer the material if the chamber/unit is in service. So please first vacant the chamber before make them in manual mode. June 19, 2025 at 3:20 PM, Kertész Dániel : I know this, but the chamber doesn’t belong to FA June 19, 2025 at 3:21 PM, Kertész Dániel : @manufacturing June 19, 2025 at 3:21 PM, Mohammad Amir : @QuangPhan Please make it Auto. Thank you very much! June 19, 2025 at 3:23 PM, QuangPhan : CA 5-5? June 19, 2025 at 3:23 PM, Mohammad Amir : Yes. Thank you very much! June 19, 2025 at 3:24 PM, 전 운 (Jeon Woon) : Plz recheck June 19, 2025 at 3:24 PM, Mohammad Amir : Thank you very much! AGV#6 has assigned for remaining pallets. ✅ June 19, 2025 at 3:24 PM, Mohammad Amir : Sure , checking June 19, 2025 at 3:27 PM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 53 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 39 • Cathode:74 GF NC reel Available :- • AN: 00 • CA: 93 ///////////////////////////////////////// VD Unload request .Anode: 13 .Cathode: 04 Load request(Exist Jobs) .Anode:06 .Cathode:04 Load request waiting for materials: Anode:96 Cathode:54 Thank you! June 19, 2025 at 3:27 PM, Mohammad Amir : @전 운 (Jeon Woon) June 19, 2025 at 3:29 PM, 전 운 (Jeon Woon) : THX! June 19, 2025 at 3:29 PM, Mohammad Amir : You are welcome! June 19, 2025 at 4:47 PM, Zulaa/졸라/Ivancsa FA : @MCS GF VD CA 6/6 chamber is empty , so please delete the AGV s job. Thank you. June 19, 2025 at 4:47 PM, Mohammad Amir : Checking June 19, 2025 at 4:48 PM, Mohammad Amir : All the jobs have been cancelled successfully ✅. Thank you very much! June 19, 2025 at 5:25 PM, 최명운(CHOI MYOUNGWOON) : GF AN NC 6-3 AGV #9 Full Magazine Conduction Occurs June 19, 2025 at 5:40 PM, 최명운(CHOI MYOUNGWOON) : Correction! 3-1 conduction generation June 19, 2025 at 6:01 PM, Shakir (MCS) : @FA Please check C1STKC72_C01, Load collapse error. Thank you June 19, 2025 at 6:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1): Magyar Balázs Shift change(0): Elektróda:(3) Szabadi Miklós, Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 19, 2025 at 6:54 PM, Shakir (MCS) : @FA Please check C1CNV071_12_014 Data mismatch error. Thank you June 19, 2025 at 7:01 PM, Tetiana SL/D : Hello. Agv#3 stopped with error near Staсking Line 3/18 Please check @FA Thank you so much. June 19, 2025 at 7:04 PM, Khaliun/Ivancsa FA : Solved June 19, 2025 at 7:27 PM, Nguyen Huy : @FA @MCS Pls request AGV to take out materials from chamber 5-9 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 19, 2025 at 7:46 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 30 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 46 • Cathode:110 GF NC reel Available :- • AN: 00 • CA: 81 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 05 Load request(Exist Jobs) .Anode:02 .Cathode:04 Load request waiting for materials: Anode:92 Cathode:88 Thank you! June 19, 2025 at 7:47 PM, Novák Károly F. A. : @Shakir (MCS) Hi. On the C0PVC030_P12 I can currently find these magazines: Mc6480 Mc6456 Mc2342 Mc3519 Mc3365 Mc6221 Do you see them here? June 19, 2025 at 7:48 PM, Shakir (MCS) : Job initiated to STK Thank you June 19, 2025 at 7:51 PM, Novák Károly F. A. : @Shakir (MCS) In the MCS, there are only 3 magazines on P12. June 19, 2025 at 7:52 PM, Shakir (MCS) : Yes June 19, 2025 at 7:52 PM, Shakir (MCS) : MC6480,MC6456,MC2342 June 19, 2025 at 7:55 PM, Novák Károly F. A. : Please enter these 3 magazine data :Mc3519, Mc3365, Mc6221. June 19, 2025 at 7:57 PM, Shakir (MCS) : Please RackIn again to gantry input port. June 19, 2025 at 8:01 PM, Novák Károly F. A. : All 6 magazines are currently available on p12. These magazine numbers are already in the CCS: Mc6480, Mc6456, Mc2342, Mc3519, Mc3365,Mc6221. Please modify the data. June 19, 2025 at 8:03 PM, Shakir (MCS) : We can’t modify it, if you can rankIn again the data automatically updated in MCS. June 19, 2025 at 8:04 PM, Novák Károly F. A. : Okay. We'll remove the magazines so the robot can work. Please delete the data from p12. June 19, 2025 at 8:06 PM, Shakir (MCS) : Data deleted from P12 Thanks June 19, 2025 at 8:09 PM, Novák Károly F. A. : Thank you very much. The robot is working again. June 19, 2025 at 8:38 PM, 이도형 (Lee) : @FA Ca VD 3plate 현장보관 중 - MES오류 전/후창고 투입불가로 원인파악 중(FA) -MLC2204 MC3011 4464 3178 2420 6094 5029 -MLC2212 MC6007 5153 3408 3105 3280 5292 -MLC3220 MC3379 5163 4017 3138 1333 5312 확인 부탁드립니다. June 19, 2025 at 8:43 PM, Nguyen Huy : @MCS VD CA 2-3 and 6-6 half chamber occurred, pls check June 19, 2025 at 8:49 PM, Shakir (MCS) : Both chamber are full June 19, 2025 at 8:50 PM, Shakir (MCS) : Only 2-5 VD CA half chamber for that we received LR, material not available. Thank you June 19, 2025 at 9:05 PM, Yosyp Tovt : Hello line 4 stacking stopped AGV 9 June 19, 2025 at 9:08 PM, Nguyen Huy : Okay, thanks for the info June 19, 2025 at 9:11 PM, Shakir (MCS) : @FA Please check C1CNV072_P22 run time over error. Thank you June 19, 2025 at 9:20 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 37 • Cathode:106 GF NC reel Available :- • AN: 00 • CA: 55 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 01 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:92 Cathode:74 Thank you! June 19, 2025 at 9:21 PM, Shakir (MCS) : @FA Please check E0CNVC52_RTV, OOS Thanks June 19, 2025 at 9:39 PM, 은향(OH EUN HYANG) : Technician, can you come in? Gf CA Nc June 19, 2025 at 9:46 PM, 이도형 (Lee) : @FA PM님 주간조 인수받았고 직접 투입 시 불가 확인부탁드립니다. June 19, 2025 at 10:29 PM, Nandia FA : @MCS GF VD AN 1/4호기 LD/UD알람지속발생중입니다. 해당 호기 OOS후 점검 부탁드립니다. June 19, 2025 at 10:32 PM, Shakir (MCS) : @Nandia FA Check agv09,10 error NC AN, thanks June 19, 2025 at 10:34 PM, Khaliun/Ivancsa FA : I am working. June 19, 2025 at 10:44 PM, Shakir (MCS) : From MCS everything good, May be there is some issue with Equipment side. @Nguyen Huy June 19, 2025 at 10:52 PM, Nguyen Huy : I'll go and check it now June 19, 2025 at 10:52 PM, Shakir (MCS) : Thank you June 19, 2025 at 10:56 PM, Nguyen Huy : The chamber only half loaded, can you check pls? I pressed LR June 19, 2025 at 10:58 PM, Shakir (MCS) : Yes half chamber, two job terminated because AGV UD/LD issue with equipment now we received LR. Plates will transfer soon. Thank you June 19, 2025 at 11:21 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 48 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 20 • Cathode:106 GF NC reel Available :- • AN: 00 • CA: 66 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 05 Load request(Exist Jobs) .Anode:06 .Cathode:04 Load request waiting for materials: Anode:74 Cathode:82 Thank you! June 20, 2025 at 12:51 AM June 20, 2025 at 12:51 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_052, Run time over error. Thank you June 20, 2025 at 1:06 AM, Jun(정우준)_SKOH FA : can you check available lot? June 20, 2025 at 1:06 AM, Jun(정우준)_SKOH FA : @Shakir (MCS) June 20, 2025 at 1:06 AM, Shakir (MCS) : Checking June 20, 2025 at 1:11 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 45 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 17 • Cathode:98 GF NC reel Available :- • AN: 04 • CA: 48 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:62 Cathode:76 Thank you! June 20, 2025 at 1:50 AM, Dariimaa/다리마/Ivancsa : @MCS NC AN AGV#9 idle. Please check. Thank you! June 20, 2025 at 1:51 AM, Nguyen Huy : @Shakir (MCS) hello, pls check VD CA 6-1, AGV didn't unload all plates, 1 plate still left inside, thanks June 20, 2025 at 1:51 AM, Jun(정우준)_SKOH FA : is it empty or full? June 20, 2025 at 1:51 AM, Dariimaa/다리마/Ivancsa : Full June 20, 2025 at 1:52 AM, Jun(정우준)_SKOH FA : done June 20, 2025 at 1:53 AM, Jun(정우준)_SKOH FA : there is no lot for that port. June 20, 2025 at 1:54 AM, Jun(정우준)_SKOH FA : GF Next lot quantity available Pre STK > Notching • Anode: 45 • Cathode: 00 June 20, 2025 at 1:57 AM, Jun(정우준)_SKOH FA : oh sorry, I missed. June 20, 2025 at 1:57 AM, Shakir (MCS) : UR failed for Port4 because carrier id real fail. That’s why only three plates unload. June 20, 2025 at 1:57 AM, Shakir (MCS) : Hmm its UR June 20, 2025 at 1:58 AM, Nguyen Huy : Should we recheck the mgz ID? June 20, 2025 at 1:59 AM, Shakir (MCS) : May be issue with equipment sensor June 20, 2025 at 2:02 AM, Jun(정우준)_SKOH FA : now, it's unloaded. June 20, 2025 at 2:22 AM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it. Thank you June 20, 2025 at 2:42 AM, Shakir (MCS) : @FA Please check E0CNVC52_RTV, OOS Thanks June 20, 2025 at 2:43 AM, Novák Károly F. A. : Checking June 20, 2025 at 2:44 AM, 이도형 (Lee) : @FA VD An 1-1 챔버내 안착상태 불량 조치 부탁드립니다 June 20, 2025 at 2:45 AM, Novák Károly F. A. : Solved June 20, 2025 at 2:48 AM, 이도형 (Lee) : Tension@FA VD An 1-1 Chamber's poor stability Please take action June 20, 2025 at 2:59 AM, 이도형 (Lee) : @Jun(정우준)_SKOH FA 확인부탁드립니다 June 20, 2025 at 2:59 AM, Jun(정우준)_SKOH FA : 네 잠시만요 June 20, 2025 at 3:15 AM, Nandia FA : @MCS GF VD CA 1/8호기 LD/UD알람지속발생중입니다. 해당 호기 OOS후 점검 부탁드립니다. June 20, 2025 at 3:16 AM, Shakir (MCS) : @Nguyen Huy could you please check June 20, 2025 at 3:19 AM, Nguyen Huy : One moment and I'll go there June 20, 2025 at 3:20 AM, Shakir (MCS) : From MCS everything okay, May be Problem with AGV and equipment communication. June 20, 2025 at 3:34 AM, Jun(정우준)_SKOH FA : its working now. June 20, 2025 at 3:40 AM, Nguyen Huy : Thank you June 20, 2025 at 4:27 AM, Nguyen Huy : Same problem with chamber 5-1 VD CA, pls check @Shakir (MCS) @Jun(정우준)_SKOH FA June 20, 2025 at 4:35 AM, Shakir (MCS) : Same problem with 5-1 VD CA. June 20, 2025 at 4:36 AM, Shakir (MCS) : Now Job initiated to Post VD June 20, 2025 at 4:40 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 11 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:90 GF NC reel Available :- • AN: 04 • CA: 48 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 10 Load request(Exist Jobs) .Anode:00 .Cathode:02 Load request waiting for materials: Anode:60 Cathode:76 Thank you! June 20, 2025 at 4:40 AM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 and remove 1+6 carriers from it. Thank you June 20, 2025 at 4:41 AM, Jun(정우준)_SKOH FA : done June 20, 2025 at 4:42 AM, Nguyen Huy : Thank you June 20, 2025 at 5:48 AM, Mohammad Amir : @FA Please check C1STKC71_C02,there is Load Oversize error and it is blocking empty magazine delivery. Thank you very much! June 20, 2025 at 5:58 AM, 김정희(Jeong hee FA) : dayshift FA "A" Schedule Date: 2025.06.20 Time:06:00~18:00 GF 최명운 (CHOI Myoungwoon) GF 김정희 (KIM Jeong hee) June 20, 2025 at 6:06 AM, 인제(Hwang) : NC An Robot#1 Error June 20, 2025 at 6:12 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 20, 2025 at 6:17 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 17 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 03 • Cathode:66 GF NC reel Available :- • AN: 00 • CA: 37 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 12 Load request(Exist Jobs) .Anode:06 .Cathode:02 Load request waiting for materials: Anode:60 Cathode:100 Thank you very much! June 20, 2025 at 6:28 AM, Mohammad Amir : @FA @Imre Please check C1STKC71_C02 there is MCP safety relay off error and because of this there is a huge traffic on recovery CNV and empty magazine CA delivery ha stopped as well. Thank you very much! June 20, 2025 at 6:47 AM, Hồng Anh SL NC&VD 1F : Pls check for AGV 1 AN NC. June 20, 2025 at 7:57 AM, Mohammad Amir : @FA @Imre Please check C1CNV072_16_144 there is Data Mismatch error and it is blocking stacking materials delivery. Thank you very much! June 20, 2025 at 7:58 AM, Yon Ko/연커/ : Solved June 20, 2025 at 7:58 AM, Mohammad Amir : Thank you very much 🙏 June 20, 2025 at 8:05 AM, Mohammad Amir : @FA @Imre Please check CA Robot #3 Gantry (8029) there is Data mismatch error and empty magazine delivery has been slowed. Thank you very much! June 20, 2025 at 8:14 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 84 • Cathode: 51 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:65 GF NC reel Available :- • AN: 00 • CA: 15 ///////////////////////////////////////// VD Unload request .Anode: 15 .Cathode: 07 Load request(Exist Jobs) .Anode:04 .Cathode:08 Load request waiting for materials: Anode:60 Cathode:104 Thank you very much! June 20, 2025 at 8:21 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. C1STKA71 (0100102) C1STKA72 (0105502) June 20, 2025 at 8:23 AM, 인제(Hwang) : NC An AGV #4 Error June 20, 2025 at 8:25 AM, Sazzad Bhai SKon : @FA All the magazines of plate MLC1247 is duplicated. Location: C1STKC72 (0205603) Please confirm the magazines: MC1200, 4267, 6199, 4339, 3527, 3299) June 20, 2025 at 8:26 AM, Barta Rudi : @Mohammad Amir Hello, There are no empty magazines in the NC cathode machines at positions 3/3, 2/3, 1/3, 2/1, 2/2, 3/2, and 3/1. The machine is stopped. Please check it. Thank you. June 20, 2025 at 8:27 AM, Mohammad Amir : Good morning, Sure,I am checking the issue. Thank you! June 20, 2025 at 8:28 AM, 인제(Hwang) : NC An AGV#2 Error June 20, 2025 at 8:31 AM, Mohammad Amir : For NC CA 2-1, Issue has been resolved ✅. AGV#9 will be on the way with empty magazine. Checking for rest. Thank you very much! June 20, 2025 at 8:34 AM, Mohammad Amir : For NC CA 3-3, Issue has been resolved as well✅. AGV#1 will be on the way with empty magazine. For 3-1, Also AGV#5 on the way. ✅ For the rest of machines 2-3,2-2,3-2,1-3 there is an active LR just there is no material available at the O/P of Gantry ,no issues found. I am monitoring. Thank you very much! June 20, 2025 at 9:01 AM, 최정한.KOVA invited 김동섭. June 20, 2025 at 9:01 AM, 최정한.KOVA : . June 20, 2025 at 9:11 AM, 전 운 (Jeon Woon) : Please Rechecking June 20, 2025 at 9:11 AM, Mohammad Amir : Sure Sir,I am working on it. June 20, 2025 at 9:13 AM, 인제(Hwang) : Please move the plate in the VD An 5-1 chamber to the warehouse. Needs repair June 20, 2025 at 9:13 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 89 • Cathode: 42 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:69 GF NC reel Available :- • AN: 00 • CA: 16 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode:06 .Cathode:06 Load request waiting for materials: Anode:68 Cathode:108 Thank you very much! June 20, 2025 at 9:13 AM, Mohammad Amir : Sure, checking! June 20, 2025 at 9:14 AM, Barta Rudi : @Mohammad Amir Please send an AGV to the VD CA #25 3-7 machine and transfer the magazines inside to the warehouse. The technicians will inspect the machine due to a problem, so unloading is necessary. Thank you. June 20, 2025 at 9:16 AM, Mohammad Amir : I have created the command successfully to send magazine to Post VD STK successfully ✅. AGV#7 & #2 have been assigned successfully ✅. I am monitoring. Thank you very much! June 20, 2025 at 9:16 AM, Mohammad Amir : Sure, checking! June 20, 2025 at 9:18 AM, Mohammad Amir : I have created the command successfully to send magazine to Post VD STK successfully ✅. AGV#2& #8 have been assigned successfully ✅. I am monitoring. Thank you very much! June 20, 2025 at 9:26 AM, Mohammad Amir : @FA @Yon Ko/연커/ Please check VD CA AGV#2 it has LD/UD error and because of this there is AGV traffic and VD unloading is being delay. Thank you very much! June 20, 2025 at 9:26 AM, Yon Ko/연커/ : Im here. June 20, 2025 at 9:37 AM, Mohammad Amir : @Manufacturing The carrier MLC4201 you are trying to Rackin ,it still has magazine MC1277 for this magazine Stacking process still not completed, that's why you are receiving error. Please check magazine MC1277. Thank you very much! June 20, 2025 at 9:43 AM, 전 운 (Jeon Woon) : MC1277 Mgz not on that plate June 20, 2025 at 9:44 AM, Mohammad Amir : Sure Sir, Checking! June 20, 2025 at 9:47 AM, Mohammad Amir : Dear Sir, According to MCS and RTD we are seeing MC1277 magazine on MLC4201. I will suggest you please try again ,Rackin MLC4201 from M02 . Thank you very much! June 20, 2025 at 9:47 AM, 전 운 (Jeon Woon) : I deleted that plate from CCS June 20, 2025 at 9:49 AM, Mohammad Amir : Sir, Update:- Now Rackin successful and magazine have been updated and job has been created successfully ✅. Thank you very much! June 20, 2025 at 10:00 AM, KIM SEYEON [김세연]_FA : @최정한.KOVA 과장님 현재 AGV 쪽 LD UD 알람 발생 케이스를 몇건 보니 ㄴAGV가 잡을 받고 VD로 옴 ㄴVD가 설비OFF 되어있어서 PIO를 안함 이 경우인데 왜 AGV를 부르고 설비가 OFF가 되나요? June 20, 2025 at 10:01 AM, 최정한.KOVA : 해당 호기가 몇호기인가요? June 20, 2025 at 10:01 AM, KIM SEYEON [김세연]_FA : @JAEYOON KIM / CS 매니저님이 확인하셨는데 통화한번 부탁드립니다. June 20, 2025 at 10:02 AM, 최정한.KOVA : 네 알겠습니다 June 20, 2025 at 10:02 AM, KIM SEYEON [김세연]_FA : 감사합니다 June 20, 2025 at 10:06 AM, 최정한.KOVA : 네 통화 확인했습니다 June 20, 2025 at 10:06 AM, JAEYOON KIM / CS : 방금 전 상황은 건조 중 히팅알람이 떠서 건조 중지 되고, ACS에서 매뉴얼로 UR 잡을 보낸 상태에서 발생한 알람입니다. June 20, 2025 at 10:07 AM, JAEYOON KIM / CS : ACS의 경우 설비의 현재 상태까지 알 수 없어 명령이 내려오면 가서 PIO를 진행하게 됩니다. 이후 설비,포트에서 PIO를 할 상황이 안되면 AGV입장에서는 PIO 알람을 발생 시킬 수 밖에 없습니다. June 20, 2025 at 10:14 AM, KIM SEYEON [김세연]_FA : @최정한.KOVA 과장님 VD 히팅알람으로 건조가 중지되었을때 UR을 보내는 프로세스가 필요해 보입니다. June 20, 2025 at 10:16 AM, 최정한.KOVA : 해당건은 좀 에매한부분이 있습니다. 결록적으로 히터가 나간거지만 알람은 TC상하한값 초과입니다. June 20, 2025 at 10:18 AM, Mohammad Amir : @FA Please check C1CNV071(13_036)Cathode side there is Data mismatch error. It is blocking materials recovery. Thank you very much! June 20, 2025 at 10:37 AM, Mohammad Amir : @FA Please check C1STKC71_C02 there is Load Oversize error and it is blocking empty magazine delivery. Thank you very much! June 20, 2025 at 11:17 AM, 인제(Hwang) : Please check NC An AGV#6 June 20, 2025 at 11:19 AM, Mohammad Amir : @Manufacturing Please check and remove MLA2019 form C1CNV072_M04 there is magazine MC6381 in this plate, this magazine is not closed. Thank you very much! June 20, 2025 at 11:20 AM, Nguyên : NC AN GF AGV #6 ERROR June 20, 2025 at 11:40 AM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 87 • Cathode: 30 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:53 GF NC reel Available :- • AN: 00 • CA: 02 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 07 Load request(Exist Jobs) .Anode:06 .Cathode:12 Load request waiting for materials: Anode:88 Cathode:79 Thank you very much! June 20, 2025 at 11:43 AM, Yon Ko/연커/ : @Mohammad Amir VD Ca AGV#08 Is idle with material MLC4183 check this. thank you! June 20, 2025 at 11:43 AM, Mohammad Amir : Sure, checking! June 20, 2025 at 11:44 AM, Mohammad Amir : Issue has been resolved ✅. AGV#8 has now started to move. Thank you very much! June 20, 2025 at 12:50 PM, Barta Rudi : @FA @Mohammad Amir Cathode 8021 C0PVC030_08_021 data missmatch error, please check, thank you June 20, 2025 at 12:51 PM, Mohammad Amir : @Imre Please check,this issue is slowing down Empty magazine delivery speed. Thank you very much! June 20, 2025 at 12:58 PM, Mohammad Amir : @Yon Ko/연커/ @FA Please check C1STKC72_P13 there is Data Loss error and it is blocking VD CA AGV#8 job. Thank you very much! June 20, 2025 at 1:17 PM, Barta Rudi : @Mohammad Amir @FA Please send an AGV to machine CA VD #45 5-9 and transport the magazines to the warehouse. There is a sensor issue with the machine, and it requires a technician adjustment, so the magazines need to be removed. Thank you. June 20, 2025 at 1:18 PM, Mohammad Amir : Sure working on it. June 20, 2025 at 1:23 PM, Mohammad Amir : I have created the command successfully to send magazine to Post VD STK successfully ✅. AGV#4 & #9 have been assigned successfully ✅. I am monitoring. Thank you very much! June 20, 2025 at 1:36 PM, Mohammad Amir : @FA Please check and confirm is someone working on C1STKC71 ,it is OOS and because of this there is shortages of empty magazine. Thank you very much! June 20, 2025 at 1:53 PM, Nguyên : Pls request AGV come to chamber #30(4-3) AN for take out plate inside. We need to check chamber error. June 20, 2025 at 1:53 PM, Mohammad Amir : Sure, Checking! June 20, 2025 at 1:54 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 65 • Cathode: 11 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 03 • Cathode:58 GF NC reel Available :- • AN: 00 • CA: 05 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 08 Load request(Exist Jobs) .Anode:04 .Cathode:20 Load request waiting for materials: Anode:84 Cathode:48 Thank you very much! June 20, 2025 at 1:55 PM, Mohammad Amir : Sure,I will send these pallets to Post VD STK. Please first make these chambers to Auto mode, currently it is in Manual(OOS ) mode that's why created command can not proceed. Thank you very much! June 20, 2025 at 2:05 PM, Mohammad Amir : @FA @Imre Please check E0CNVC52_RTV01 is in Manual mode hence OOS and because of this reels delivery has stopped. Thank you very much! June 20, 2025 at 2:10 PM, Mohammad Amir : Update:- CA VD 5-9 has been successfully unloaded ✅. Thank you very much! June 20, 2025 at 2:16 PM, 김현태 : NC CA AGV #10 error Thanks June 20, 2025 at 2:27 PM, 인제(Hwang) : NC Ca Robot#2 Error June 20, 2025 at 2:29 PM, 김현태 : NC CA AGV #7 error Thanks June 20, 2025 at 2:30 PM, Mohammad Amir : @FA Please check C1STKC71_P22 it is OoS and because of this there is a traffic of materials on recovery CNV. Thank you very much! June 20, 2025 at 2:49 PM, Mohammad Amir : @FA @Imre Please check there is Tray data Mismatch error exists and because of this there is traffic of materials on recovery CNV. Materials recovery has stopped. Please take action. Thank you very much! June 20, 2025 at 3:13 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 66 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 16 • Cathode:80 GF NC reel Available :- • AN: 00 • CA: 11 ///////////////////////////////////////// VD Unload request .Anode: 09 .Cathode: 00 Load request(Exist Jobs) .Anode:02 .Cathode:12 Load request waiting for materials: Anode:80 Cathode:49 Thank you very much! June 20, 2025 at 4:06 PM, 최정한.KOVA : VD CA 4-9 좌측 하부 P02 플레이트 안착불량입니다. AGV 수동 재안착해주세요. June 20, 2025 at 5:11 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it ,it will increase stacking materials delivery speed. Thank you very much! June 20, 2025 at 5:13 PM, Mohammad Amir : Dear @All GF Next lot quantity available Pre STK > Notching • Anode: 36 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 44 • Cathode:98 GF NC reel Available :- • AN: 00 • CA: 20 ///////////////////////////////////////// VD Unload request .Anode: 03 .Cathode: 07 Load request(Exist Jobs) .Anode:20 .Cathode:06 Load request waiting for materials: Anode:88 Cathode:69 Thank you very much! June 20, 2025 at 5:32 PM, Csanálosi Gábor FA : @Mohammad Amir happy birthday! June 20, 2025 at 5:32 PM, Csanálosi Gábor FA : 🎉🥳👏 June 20, 2025 at 5:33 PM, Mohammad Amir : Nagyon Köszönöm szepen 🙏😊 June 20, 2025 at 5:36 PM, Szücs Géza FT-B : 🎉🥳👏 June 20, 2025 at 5:39 PM, Mohammad Amir : This message was deleted. June 20, 2025 at 5:40 PM, Mohammad Amir : @FA Please check C1STKA72_C02 there is Port interface error because of this Andoe Stacking materials delivery has been slowed. Thank you! June 20, 2025 at 5:41 PM, Yon Ko/연커/ : Solved. June 20, 2025 at 5:41 PM, Mohammad Amir : Thank you very much! June 20, 2025 at 5:42 PM, Ankhaa/Ivancsa FA : 🎉🥳👏 June 20, 2025 at 5:42 PM, Mohammad Amir : Thank you very much! 🙏 June 20, 2025 at 5:42 PM, Mohammad Amir : Köszönöm szepen 🙏. June 20, 2025 at 5:42 PM, Yon Ko/연커/ : U welcome and Happy birthday to you @Mohammad Amir 🎉 June 20, 2025 at 5:43 PM, Mohammad Amir : Thank you very much 🙏. June 20, 2025 at 5:46 PM, Zulaa/졸라/Ivancsa FA : 🎉🥳👏 June 20, 2025 at 5:46 PM, Mohammad Amir : Thank you very much 🙏 June 20, 2025 at 5:49 PM, 박태영 : Happy birthday to you! June 20, 2025 at 5:50 PM, Mohammad Amir : Dear Sir, Thank you very much 🙏. June 20, 2025 at 6:03 PM, 은향(OH EUN HYANG) : 🎉🥳👏 June 20, 2025 at 6:04 PM, Mohammad Amir : Thank you very much 🙏 June 20, 2025 at 6:06 PM, Dariimaa/다리마/Ivancsa : 🎉🥳👏 June 20, 2025 at 6:07 PM, Mohammad Amir : Thank you very much 🙏 June 20, 2025 at 6:12 PM, 카스텔 발라지 F.A. : 🎉🥳👏 June 20, 2025 at 6:13 PM, Mohammad Amir : Thank you very much 🙏 June 20, 2025 at 6:13 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.20 "B" műszak, 9+1+3/12+2 Tech, 1SL Overtime(1): Kertész Dániel Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: Göltl Noémi (Hun-Kor) --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel, Böröcz Tamás --------------- Assy GF (2): Csanálosi Gábor, Kertész Dániel --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(2): Gerbovits Kevin, Denkó János June 20, 2025 at 6:13 PM, M.Ferenc "B"Nc/Vd SL : 🎉🥳👏 June 20, 2025 at 6:13 PM, Hữu Thắng : 🎉🥳👏 June 20, 2025 at 6:14 PM, 라슬로 STK Trainer : 🎉🥳👏 June 20, 2025 at 6:14 PM, Mohammad Amir : Thank you very much everyone.🙏 June 20, 2025 at 6:18 PM, Kertész Dániel : 🎉🥳👏 June 20, 2025 at 6:35 PM, Truong : 🎉🥳👏 June 20, 2025 at 6:36 PM, Chinges Fa : 🎉🥳👏 June 20, 2025 at 6:41 PM, 정은탁 (Jung EunTak) : This message was deleted. June 20, 2025 at 6:42 PM, Nandia FA : 🎉🥳👏 June 20, 2025 at 6:47 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 07 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 03 • Cathode:62 GF NC reel Available :- • AN: 00 • CA: 18 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 06 Load request(Exist Jobs) .Anode:00 .Cathode:02 Load request waiting for materials: Anode:80 Cathode:73 June 20, 2025 at 6:51 PM, 김지수PM(Gyuri)_FA : @manufacturing Please click the LR again > VD CA 5-1 P03 P04 thanks! June 20, 2025 at 6:55 PM, 이도형 (Lee) : @FA NC Ca 5-3 Belt detachment check June 20, 2025 at 6:56 PM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. June 20, 2025 at 6:56 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B June 20, 2025 at 7:03 PM, Csanálosi Gábor FA : Solved June 20, 2025 at 7:04 PM, 김지수PM(Gyuri)_FA : @fa please check LTC0866 (Track 8111) > this one had to arrive at 8112, but stopped at that port since 8:42am thanks in advance June 20, 2025 at 7:04 PM, Csanálosi Gábor FA : Where? June 20, 2025 at 7:05 PM, 김지수PM(Gyuri)_FA : E0stkc51! 💪 June 20, 2025 at 7:05 PM, Csanálosi Gábor FA : Checking June 20, 2025 at 7:07 PM, Csanálosi Gábor FA : The port is input, so probably moved from 8112 to 8111? June 20, 2025 at 7:07 PM, Csanálosi Gábor FA : Ah i see the transfer list June 20, 2025 at 7:08 PM, 김지수PM(Gyuri)_FA : Yes🥲 destination was M05 but still be there(M05_OP01) June 20, 2025 at 7:09 PM, Csanálosi Gábor FA : I have no permission to create new manual job, pls recreate job June 20, 2025 at 7:18 PM, Ngoc zia : @fa can u come 5.3 ca Nc pls. Belt Outline deviant of the line. Mc can’t run June 20, 2025 at 7:31 PM, Csanálosi Gábor FA : Coming soon June 20, 2025 at 7:53 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20 (6010) Is there any actual carrier? SCS shows UNKDUP. June 20, 2025 at 7:56 PM, Dariimaa/다리마/Ivancsa : Solved June 20, 2025 at 7:59 PM, VK (mcs) : Did you modify carrier ID? June 20, 2025 at 7:59 PM, VK (mcs) : Please check Carrier ID in both side and also can you please tell me status of Carrie? Is it Full or Empty? June 20, 2025 at 8:01 PM, Dariimaa/다리마/Ivancsa : Full June 20, 2025 at 8:25 PM, VK (mcs) : @FA Please check Anode pre-STK A71 port 20 Output H/S off. June 20, 2025 at 8:30 PM, Ngoc zia : Hi, 5.3 ca NC this issue comes back. come & adjust pls June 20, 2025 at 8:30 PM, Ngoc zia invited Xeng. June 20, 2025 at 8:35 PM, Mykhailo : L6 ST AGV #3 error. Please check. Thanks June 20, 2025 at 9:04 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity June 20, 2025 at 9:11 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 58 • Cathode: 08 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 03 • Cathode:67 GF NC reel Available :- • AN: 00 • CA: 08 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:06 .Cathode:02 Load request waiting for materials: Anode:80 Cathode:73 June 20, 2025 at 9:20 PM, VK (mcs) : @FA Please check it, problem still not solved. And VD is half chamber because of that. Thx June 20, 2025 at 9:29 PM, Csanálosi Gábor FA : Coming June 20, 2025 at 9:34 PM, Csanálosi Gábor FA : Check pls June 20, 2025 at 9:34 PM, VK (mcs) : Yes it’s fine now. Thank you June 20, 2025 at 9:34 PM, Csanálosi Gábor FA : Your welcome! June 20, 2025 at 9:58 PM, Ngoc zia : @fa robot 3 error June 20, 2025 at 9:58 PM, Ngoc zia : Nc ca June 20, 2025 at 10:23 PM, Csanálosi Gábor FA : Coming June 20, 2025 at 10:30 PM, Csanálosi Gábor FA : @VK (mcs) i will took MLC0134 plate out from ca yaskawa 3, plate is NG June 20, 2025 at 10:32 PM, Csanálosi Gábor FA : Sry MLC3104 June 20, 2025 at 11:15 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 64 • Cathode: 04 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:93 GF NC reel Available :- • AN: 00 • CA: 12 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 05 Load request(Exist Jobs) .Anode:02 .Cathode:04 Load request waiting for materials: Anode:92 Cathode:73 June 20, 2025 at 11:59 PM, Ngoc zia : @fa nc Ca robot 3 #agv8 error June 21, 2025 at 12:05 AM June 21, 2025 at 12:05 AM, Ngoc zia : Nc ca 1.1 agv4 error June 21, 2025 at 12:19 AM, Ngoc zia : Some one can come pls June 21, 2025 at 12:20 AM, Csanálosi Gábor FA : Solved June 21, 2025 at 12:53 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 60 • Cathode: 07 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:74 GF NC reel Available :- • AN: 00 • CA: 27 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 15 Load request(Exist Jobs) .Anode:04 .Cathode:06 Load request waiting for materials: Anode:76 Cathode:73 June 21, 2025 at 1:47 AM, Dariimaa/다리마/Ivancsa : @MCS Why does VD AN only work on P11 P12 and not on other ports? June 21, 2025 at 1:50 AM, VK (mcs) : Checking June 21, 2025 at 2:02 AM, VK (mcs) : I can’t see any problem. P10 and port 09last transfer was at 1:35 But I will monitor it. Thx June 21, 2025 at 3:32 AM, 송민기(Song MinKi) invited 김동현. June 21, 2025 at 3:38 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 88 • Cathode: 07 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 19 • Cathode:93 GF NC reel Available :- • AN: 00 • CA: 18 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:94 Cathode:82 June 21, 2025 at 3:39 AM, Ngoc zia : @FA VD Ca 3-7 Drying failure due to alarm occurrence during drying. The door is open. Please return it manually to the Magazine STK-72 warehousing by agv. Thank you June 21, 2025 at 3:40 AM, Ngoc zia : @rtd can u check 5.1 vd ca pls. Haft of chamber. June 21, 2025 at 3:40 AM, Dariimaa/다리마/Ivancsa : @MCS pls check June 21, 2025 at 3:42 AM, VK (mcs) : LR received at 1:47 Material will deliver when they are available. June 21, 2025 at 3:46 AM, VK (mcs) : As MCS can just create one job, then there will be error during unloading. It’s better transfer it by ACS order. June 21, 2025 at 3:46 AM, Dariimaa/다리마/Ivancsa : Okay. Thank you! June 21, 2025 at 3:50 AM, 김지수PM(Gyuri)_FA : Vc02 Vc07 were assigned June 21, 2025 at 3:58 AM, 김지수PM(Gyuri)_FA : @fa please check E0STA52 >was stopped with no alarams June 21, 2025 at 4:01 AM, 김지수PM(Gyuri)_FA : Solved June 21, 2025 at 4:28 AM, 김지수PM(Gyuri)_FA : @Dariimaa/다리마/Ivancsa please check VC02 CA VD June 21, 2025 at 4:37 AM, 김지수PM(Gyuri)_FA : @fa Please check e0stka52, oversize error June 21, 2025 at 4:50 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B June 21, 2025 at 4:50 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA June 21, 2025 at 4:56 AM, Csanálosi Gábor FA : @Kertész Dániel June 21, 2025 at 4:57 AM, Szücs Géza FT-B : cnv072 have errors a lot. June 21, 2025 at 4:58 AM, 방혁 PM(Bang.Hyuk) FA : I see June 21, 2025 at 5:06 AM, Debreczeni Ármin : @VK (mcs) please send lot quantity thank you June 21, 2025 at 5:08 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKC51 > MCP AP ERROR, thanks in advance June 21, 2025 at 5:10 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 96 • Cathode: 10 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 10 • Cathode:88 GF NC reel Available :- • AN: 00 • CA: 15 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 05 Load request(Exist Jobs) .Anode:04 .Cathode:08 Load request waiting for materials: Anode:102 Cathode:86 June 21, 2025 at 5:25 AM, VK (mcs) : Can someone please check Circular conveyor C1CNV072-port 12 (16014) Is there any carrier ? June 21, 2025 at 5:33 AM, VK (mcs) : It seems carrier ID is not correct, CCS shows MLA6226 but MCS and SCS shows something else. June 21, 2025 at 5:37 AM, Dariimaa/다리마/Ivancsa : Yes. MLA6226 is the carrier. June 21, 2025 at 5:37 AM, 방혁 PM(Bang.Hyuk) FA : @FA please check C51 C02 mcp ap error June 21, 2025 at 5:37 AM, VK (mcs) : Can you check both side of carrier? June 21, 2025 at 5:40 AM, Dariimaa/다리마/Ivancsa : Both sides are the same MLA6226 June 21, 2025 at 5:48 AM, VK (mcs) : @방혁 PM(Bang.Hyuk) FA There is mismatch location for MLA6226 CCS indicates 2 different places C0PVA010-P08 C1CNV072-P12 SCS Indicates:C1STKA71 (0200101) Please check the which one is correct. Thx June 21, 2025 at 5:51 AM, Ngoc zia : Nc Ca 4.2 #agv4 error June 21, 2025 at 5:59 AM, VK (mcs) : Now it’s stored in C1STKA71 (0200302)!! June 21, 2025 at 6:12 AM, P.Bence A SSL : L3 stacking Agv 1 stop please check June 21, 2025 at 6:38 AM, Andrea Zentay : Good morning, @MCS We would like help, because the magazines are arriving very slowly for the L3 ST. Thank you! June 21, 2025 at 6:41 AM, duzzaman Md (MCS) : Good morning, Andrea. No issue found. There are active jobs, some of them are already in the vehicle. I'm keeping eyes on it. June 21, 2025 at 6:45 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 99 • Cathode: 27 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:80 GF NC reel Available :- • AN: 00 • CA: 17 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode:04 .Cathode:00 Load request waiting for materials: Anode:88 Cathode:100 June 21, 2025 at 7:07 AM, Barta Rudi : @duzzaman Md (MCS) Good morning! The following machines have been down for a longer period due to empty magazine shortage: 1/2, 1/3, 2/3, 2/2, 2/1, 6/2, 3/3. Please check, thank you. (cathode) June 21, 2025 at 7:22 AM, duzzaman Md (MCS) : Good morning! 1/2: No search lot 1/3: No search lot 2/3, 2/2,2/1: No search lot 6/2: No LR 3/3: cant search Notching output port June 21, 2025 at 7:33 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 21, 2025 at 7:56 AM, duzzaman Md (MCS) : @Manufacturing Please check C1CNV072_M01 and remove 1+2 carriers from it . Thank you ! June 21, 2025 at 8:11 AM, 안종수 : NC AN #10 AGV Error. Please check @FA June 21, 2025 at 8:12 AM, 전 운 (Jeon Woon) : Please note that we have stopped the 2Line Stack Station due to lack of An electrodes. @FA @MCS June 21, 2025 at 8:13 AM, Eduard SL Shift A : on line 6 ST slow delivery AN magazine please check June 21, 2025 at 8:13 AM, Zulaa/졸라/Ivancsa FA : No error. June 21, 2025 at 8:14 AM, 안종수 : I’m sorry. It’s 1F. You posted it wrong. June 21, 2025 at 8:15 AM, duzzaman Md (MCS) : Materials are on AGV. June 21, 2025 at 8:33 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 114 • Cathode: 31 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 14 • Cathode:84 GF NC reel Available :- • AN: 00 • CA: 15 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:14 .Cathode:04 Load request waiting for materials: Anode:80 Cathode:88 June 21, 2025 at 9:06 AM, Zulaa/졸라/Ivancsa FA : @MCS GF ST AN C3STM130_P01 is full, so please delete the AGV#01 job. June 21, 2025 at 9:09 AM, duzzaman Md (MCS) : Cancelled and sending back to STK. Thanks ! June 21, 2025 at 9:18 AM, 정다은 : @duzzaman Md (MCS) Dear, could you share latest status? June 21, 2025 at 9:21 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 119 • Cathode: 38 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 03 • Cathode:68 GF NC reel Available :- • AN: 04 • CA: 17 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode:04 .Cathode:02 Load request waiting for materials: Anode: 76 Cathode:80 June 21, 2025 at 9:23 AM, Gua/ IvancsaFa : @MCS GF ST AN C3STM130_P01 is full, so please delete the AGV#05 job. June 21, 2025 at 9:26 AM, duzzaman Md (MCS) : Cancelled and job created for STK. Thank you June 21, 2025 at 9:32 AM, 전 운 (Jeon Woon) : Please note that we have stopped the 1,3Line Stack Station due to lack of An electrodes. @FA @MCS June 21, 2025 at 9:34 AM, 전 운 (Jeon Woon) : Please 1,3Line AGV Job Cancle Plz @duzzaman Md (MCS) June 21, 2025 at 9:35 AM, 전 운 (Jeon Woon) : For Stack AGV June 21, 2025 at 9:42 AM, Eduard SL Shift A : Line 5 ST11 AGV 7 stopped June 21, 2025 at 9:43 AM, Gua/ IvancsaFa : @MCS Please delete the ST CA AGV#7 job. Port is full. Thank you. June 21, 2025 at 9:57 AM, duzzaman Md (MCS) : Done and send back to stk. June 21, 2025 at 9:58 AM, duzzaman Md (MCS) : No job for ST line 1 and 3 now. Thank you June 21, 2025 at 11:04 AM, Barta Rudi : @duzzaman Md (MCS) Good morning! The following machines have been down for a longer period due to empty magazine shortage: 4/2,4/3,3/3,1,3,2/3. Please check, thank you. (cathode) June 21, 2025 at 11:11 AM, 정다은 : @duzzaman Md (MCS) Could you share the current status? cause many VD are finished June 21, 2025 at 11:13 AM, 최명운(CHOI MYOUNGWOON) : @CS GF VD AN 2-3 Fork2 LD/UD REG NOT RECEIVED error June 21, 2025 at 11:14 AM, 인제(Hwang) : @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) PM님 아까 구두로 말씀드린 상황 재발생합니다. GF 음극 노칭 RTV 출고포트는 다 비어있는데 바로 출고하지않고 보관장소에서 대기중입니다. 릴 부족으로 비가동 지속 발생 중이니 확인 부탁드립니다. June 21, 2025 at 11:17 AM, duzzaman Md (MCS) : LGF Next lot quantity available Pre STK > Notching • Anode: 100 • Cathode: 26 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 07 • Cathode:82 GF NC reel Available :- • AN: 23 • CA: 34 ///////////////////////////////////////// VD Unload request .Anode: 16 .Cathode: 01 Load request(Exist Jobs) .Anode:10 .Cathode:04 Load request waiting for materials: Anode: 88 Cathode:76 June 21, 2025 at 11:26 AM, 인제(Hwang) : please check NC An AGV#1 June 21, 2025 at 11:32 AM, 최명운(CHOI MYOUNGWOON) : VD 2-3 바코드 리딩기(P3,4)의 위치가 좌측 방향으로 치우쳐 있어 위치 조정 후 정상 작동 되었습니다 June 21, 2025 at 11:33 AM, Zulaa/졸라/Ivancsa FA : @MCS Please delete the ST AN AGV#01 job. Port is full. Thank you. June 21, 2025 at 11:35 AM, duzzaman Md (MCS) : @Manufacturing Could you please check the status of Anode CNVA52 manual ports physically. Jobs are getring delayed Thank you June 21, 2025 at 11:35 AM, Anita Mirosnicsenko : Hello! Line 3 AGV 2 stopped please check! Thank you! June 21, 2025 at 11:39 AM, duzzaman Md (MCS) : Done. Thank you June 21, 2025 at 11:44 AM, 전 운 (Jeon Woon) : 3Line Stack Station Auto On. June 21, 2025 at 11:45 AM, Gua/ IvancsaFa : @MCS Please delete the ST AN AGV#07 job. Port is full. Thank you. June 21, 2025 at 11:48 AM, duzzaman Md (MCS) : Done, thank you! June 21, 2025 at 12:03 PM, Barta Rudi : @duzzaman Md (MCS) The 1/3 machine is receiving empty magazines very slowly. Please check it — it hasn’t received a magazine for over an hour. Even before that, the machine waited two hours for a magazine… June 21, 2025 at 12:03 PM, Barta Rudi : Cathode June 21, 2025 at 12:04 PM, Anita Mirosnicsenko : Line 3 STK AGV8 stopped please check! Thank you! June 21, 2025 at 12:08 PM, duzzaman Md (MCS) : Its because there's no empty magazine at Gantry output port June 21, 2025 at 12:10 PM, Zulaa/졸라/Ivancsa FA : @MCS Please delete the ST AN AGV#08 job. Port is full. Thank you. June 21, 2025 at 12:15 PM, duzzaman Md (MCS) : Done, thank you June 21, 2025 at 12:17 PM, duzzaman Md (MCS) : @Manufacturing Could you please check. Jobs are getting delayed. Everything is good from MCS. Thank you June 21, 2025 at 12:19 PM, Yon Ko/연커/ : @MCS Please delete the ST AN AGV#01 job. Port is full. Thank you. June 21, 2025 at 12:21 PM, Barta Rudi : @duzzaman Md (MCS) Today, on the cathode side, the L1, L2, and L3 machines are receiving very few empty magazines. The machines on these lines have been standing idle for hours… Please check what the issue might be. There are 28 plate empty magazines in the warehouse… June 21, 2025 at 12:22 PM, duzzaman Md (MCS) : Done. Thank you June 21, 2025 at 12:29 PM, Yon Ko/연커/ : @MCS ST AN Since Port 3-3 is full of material, please cancel the jobs of the AGVs assigned to this port. Thank u! June 21, 2025 at 12:32 PM, duzzaman Md (MCS) : Done , thank you June 21, 2025 at 12:35 PM, Yon Ko/연커/ : AGV9 is on its way to Port 3-3. June 21, 2025 at 12:38 PM, P.Bence A SSL : @duzzaman Md (MCS) please check thank you .. June 21, 2025 at 12:39 PM, duzzaman Md (MCS) : The job was created 6 mins earlier. Deleting it and sending it back. June 21, 2025 at 12:49 PM, duzzaman Md (MCS) : We dont see any issue from MCS side. As soon as, materials are being available in the gantry output port P12 and P13, jobs are being created for the notching machines. Monitoring it further. June 21, 2025 at 12:51 PM, duzzaman Md (MCS) : Also the 28 you see, is total available material. They should be available at Gantry output ports. Even if 28 material is available, it will show no material available unless they are at the output port. June 21, 2025 at 12:53 PM, 권재환 : @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) GF Reel 창고 멈췄습니다 조치 부탁드립니다 June 21, 2025 at 12:54 PM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKC72_P09 DATA MISSMATCH ERROR THANK YOU June 21, 2025 at 12:57 PM, Yon Ko/연커/ : Solved June 21, 2025 at 1:00 PM, 최명운(CHOI MYOUNGWOON) : 가동됐습니다 June 21, 2025 at 1:01 PM, 권재환 : 감사합니다 June 21, 2025 at 1:03 PM, Gua/ IvancsaFa : @mcs please delete agv #6 job at ST AN. port is full June 21, 2025 at 1:08 PM, duzzaman Md (MCS) : Done and sent back. Thank you June 21, 2025 at 1:13 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 86 • Cathode: 18 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:90 GF NC reel Available :- • AN: 18 • CA: 43 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 02 .Cathode:06 Load request waiting for materials: Anode: 108 Cathode: 80 June 21, 2025 at 1:13 PM, Gua/ IvancsaFa : @mcs please delete agv #3 job at ST AN. port is full June 21, 2025 at 1:15 PM, duzzaman Md (MCS) : Done and sent back. Thank you June 21, 2025 at 1:17 PM, 박태영 : @심재훈 릴창고 full로 인해서 노칭 투입지연됩니다. 공트레이와 릴 재고 제조에서 관리 해주시지 않으면 자동화에서 투입지연 보장해드릴수가 없습니다 June 21, 2025 at 1:21 PM, Gua/ IvancsaFa : @mcs please delete agv #10 job at ST AN. port is full June 21, 2025 at 1:23 PM, duzzaman Md (MCS) : Deleted and sent back. Thank you June 21, 2025 at 1:30 PM, 정다은 : @김건희 PM님 유선상 말씀 드린 것과 같이, 릴창고 내 공트레이와 사용 불가한 보류 릴들 챙겨주시면 감사하겠습니다 June 21, 2025 at 1:41 PM, 최명운(CHOI MYOUNGWOON) : @duzzaman Md (MCS) GF ST 3Line AGV is still transporting cargo at location C3_130_P01. Please check if there is any problem with LR. June 21, 2025 at 1:48 PM, duzzaman Md (MCS) : Could you confirm which carrier is there physically ? June 21, 2025 at 2:04 PM, duzzaman Md (MCS) : Is it MLC0125 ? If otherwise, kindly let me know. June 21, 2025 at 2:07 PM, 최명운(CHOI MYOUNGWOON) : AGV#7 is now trying to transfer cargo here due to this problem and an ERROR has occurred. The same phenomenon has occurred before. Please check why LR is repeated even though there is cargo here. June 21, 2025 at 2:08 PM, 최명운(CHOI MYOUNGWOON) : The cargo at the station is MLC4163, and the cargo of AGV#7 is MLC1180. June 21, 2025 at 2:08 PM, duzzaman Md (MCS) : Because it shows empty at MCS. So, LR is being generated. If you confirm me the carrier number Located their physically, I could update it. Then LR won't be generated. June 21, 2025 at 2:10 PM, duzzaman Md (MCS) : So, MLC4163 is now at C3STM130_P01. Right? June 21, 2025 at 2:11 PM, 최명운(CHOI MYOUNGWOON) : Station cargo is MLC4163, AGV#7's cargo is MLC1180 June 21, 2025 at 2:14 PM, duzzaman Md (MCS) : Thank you for the clarification. MLC1180 has been sent to STK. For MLC4163, location has been updated. There won't be LRs now. June 21, 2025 at 2:19 PM, 권재환 : @지석범PM (이반차FA) @이주봉PM LEE JUBONG(FA) GF E0STKA51 manual 1번 cylinder error 떴습니다 조치 부탁드립니다 June 21, 2025 at 2:20 PM, 이주봉PM LEE JUBONG(FA) : @최명운(CHOI MYOUNGWOON) 현장 확인해주세요 트레이 스토퍼 걸렸을거에요 June 21, 2025 at 2:20 PM, 권재환 : 현지 technician이 조치 했습니다 June 21, 2025 at 2:32 PM, 전 운 (Jeon Woon) : Please Rechecking June 21, 2025 at 2:36 PM, 권재환 : @지석범PM (이반차FA) @이주봉PM LEE JUBONG(FA) GF E0STKA51 멈췄습니다 조치 부탁드립니다 June 21, 2025 at 2:37 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 105 • Cathode: 04 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 29 • Cathode:105 GF NC reel Available :- • AN: 44 • CA: 43 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 05 Load request(Exist Jobs) .Anode: 00 .Cathode:02 Load request waiting for materials: Anode: 132 Cathode: 84 June 21, 2025 at 3:57 PM, 조한진(Jin) : CA VD 전창고 Crane Alarm 발생했습니다. 확인 부탁드립니다. June 21, 2025 at 4:04 PM, 정다은 : @duzzaman Md (MCS) could you share current status? June 21, 2025 at 4:10 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 117 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 51 • Cathode:104 GF NC reel Available :- • AN: 49 • CA: 448 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 05 Load request(Exist Jobs) .Anode: 04 .Cathode:00 Load request waiting for materials: Anode: 152 Cathode: 84 Thank you June 21, 2025 at 4:30 PM, 전 운 (Jeon Woon) : 1Line Stack Station Switch to auto @MCS June 21, 2025 at 4:41 PM, Yon Ko/연커/ : @MCS ST AN AGV6 is idle with material. Check it thank u! June 21, 2025 at 4:45 PM, duzzaman Md (MCS) : Thank you. It has been sent back to the STK. June 21, 2025 at 4:56 PM, 전 운 (Jeon Woon) : 2Line Stack Station Switch to auto @MCS June 21, 2025 at 4:56 PM, duzzaman Md (MCS) : Thank you for informing June 21, 2025 at 5:22 PM, 인제(Hwang) : 51 릴 창고 미동작 중인데 확인 부탁드립니다 June 21, 2025 at 5:23 PM, 인제(Hwang) : 음극입니다 June 21, 2025 at 5:26 PM, 인제(Hwang) : RTV 진입 전 7049포트 릴 있는데 안넘어가면서 다 막힌거같습니다. 음극 릴 재고부족해서 비가동 발생 중이니 빠른 확인 부탁드립니다 June 21, 2025 at 5:30 PM, duzzaman Md (MCS) : Solved. Its moving now. Thank you ! June 21, 2025 at 5:30 PM, 이주봉PM LEE JUBONG(FA) : 조치했습니다. June 21, 2025 at 5:31 PM, 인제(Hwang) : 감사합니다! June 21, 2025 at 5:31 PM, 이주봉PM LEE JUBONG(FA) : 미작동이아니라51번에 투입된 릴이 52번창고로 넘어사는 Job이 많이 쌓여있어서 그래요.. June 21, 2025 at 5:59 PM, 김태헌 : 1Line Stack Stop production, Stack station manual on 17:52~ June 21, 2025 at 6:10 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.21 "B" műszak, 9+1+2/12+2 Tech, 1SL Overtime(1): Harasztia Zoltán Holiday(1): Pintye Miklós Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Rácz Dániel --------------- Assy GF (2): Csanálosi Gábor, Böröcz Tamás --------------- Assy 1F (2): Böröczki Balázs, Takács Ádám --------------- Formation/Modul(3): Harasztia Zoltán, Gerbovits Kevin, Denkó János --------------- S June 21, 2025 at 6:24 PM, 정다은 : Dear MCS member, could you share current status? June 21, 2025 at 6:24 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.21 Time: 18:00~ 06:00 1.Assy 이민재(Lee minjae) June 21, 2025 at 6:29 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity June 21, 2025 at 6:35 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 136 • Cathode: 01 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:91 GF NC reel Available :- • AN: 59 • CA: 38 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 08 Load request(Exist Jobs) .Anode: 00 .Cathode:04 Load request waiting for materials: Anode: 152 Cathode: 87 June 21, 2025 at 7:05 PM, Böröcz Tamás : Köszi Feri ❤️ June 21, 2025 at 7:40 PM, VK (mcs) : @FA Please check Cathode reel STK C52 There is no error but cranes are stopped. June 21, 2025 at 7:41 PM, Csanálosi Gábor FA : Checking June 21, 2025 at 7:47 PM, 김지수PM(Gyuri)_FA : @fa please check the HS ready of 6056 6057 E0STKA51 June 21, 2025 at 7:51 PM, Csanálosi Gábor FA : Ill do after c52 June 21, 2025 at 7:58 PM, Tuya Ivancsa FA : VD AN chamber 27 is LD/UD error. Pls check it . June 21, 2025 at 7:59 PM, Csanálosi Gábor FA : Looks okay to me now June 21, 2025 at 8:00 PM, Csanálosi Gábor FA : Solved June 21, 2025 at 8:32 PM, Hữu Thắng : @MCS Could you please check UR VD AN 5/8 . Thank you June 21, 2025 at 8:35 PM, VK (mcs) : UR received but reply is: fail Carrier location mismatch for port 2 June 21, 2025 at 8:36 PM, Debreczeni Ármin : @VK (mcs) please send fresh status please June 21, 2025 at 8:40 PM, Hữu Thắng : Can you please tell me what should i do in this situation . June 21, 2025 at 8:40 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 151 • Cathode: 01 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:104 GF NC reel Available :- • AN: 60 • CA: 44 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 06 .Cathode:06 Load request waiting for materials: Anode: 140 Cathode: 79 June 21, 2025 at 8:43 PM, Tuya Ivancsa FA : Assy 이민재(Lee minjae) June 21, 2025 at 8:54 PM, VK (mcs) : Please modify carrier ID and then apply LR. June 21, 2025 at 8:54 PM, Ngoc zia : @fa nc ca 5.3 #agv7 error June 21, 2025 at 8:55 PM, VK (mcs) : Unload request * June 21, 2025 at 9:05 PM, VK (mcs) : @FA Please check Anode reel conveyor A52 -Buffer port 1(7027) LTA1661 has transfer command but it’s not transferring to destination M01 for a while. Thx June 21, 2025 at 9:09 PM, Hữu Thắng : MLA2052 Upper left -MLA6080 Lower -MLA0230 Upper right-MLA0040 Lower right June 21, 2025 at 9:09 PM, Hữu Thắng : i pressed UR once June 21, 2025 at 9:10 PM, VK (mcs) : MLA6080 according to MCS and SCS is located in anode Pre-STK A71 (0205004) June 21, 2025 at 9:13 PM, VK (mcs) : @FA @Manufacturing Please check Anode pre-STKA71 C1STKA71 (0205004) MLA6080 has mismatch location. Please rack it out/In . Thx June 21, 2025 at 9:53 PM, Xeng : NC CA 5.3 error in line bur p10 progress0ccur serror June 21, 2025 at 10:19 PM, Hữu Thắng : @MCS Can you plz check AGV#3 in NC AN Line 2/3 . It seems Agv is idle . Thank you June 21, 2025 at 10:25 PM, 이민재 : @MCS Please check the returnable materials. June 21, 2025 at 10:30 PM, Hữu Thắng : @MCS NC AN stopped due to no empty magazines 2/1 : 21:59 ~ 2/2 : 21:17 ~ 2/3 : 21:32 ~ 3/2 : 21:50 ~ Can you check LR for these machines please June 21, 2025 at 10:31 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 174 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:109 GF NC reel Available :- • AN: 57 • CA: 61 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 01 Load request(Exist Jobs) .Anode: 02 .Cathode:00 Load request waiting for materials: Anode: 146 Cathode: 77 June 21, 2025 at 10:35 PM, Hữu Thắng : @FA Nc an line 1/2 agv#10 stopped . Can u pls check it . Thank June 21, 2025 at 10:36 PM, Ngoc zia : @rtd can u check vd an 3-9 pls. Haft chamber. June 21, 2025 at 10:37 PM, Csanálosi Gábor FA : Done June 21, 2025 at 10:41 PM, VK (mcs) : Problem is, empty plate exists in conveyor ports, and they are waiting for a Full plate. A temporary solution is remove empty plates from conveyor ports. June 21, 2025 at 10:42 PM, Hữu Thắng : again . Plz check June 21, 2025 at 10:42 PM, Csanálosi Gábor FA : On it, watching ;) June 21, 2025 at 11:00 PM, Csanálosi Gábor FA : @VK (mcs) gf an nc agv 10 has issue with c1nca020_p03, can you redirect agv elswhere and send another agv instead with empty plates? June 21, 2025 at 11:00 PM, VK (mcs) : Checking June 21, 2025 at 11:03 PM, VK (mcs) : I will send it back to STK. June 21, 2025 at 11:05 PM, Csanálosi Gábor FA : Thx June 22, 2025 at 12:06 AM June 22, 2025 at 12:06 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 181 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:98 GF NC reel Available :- • AN: 62 • CA: 41 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 09 Load request(Exist Jobs) .Anode: 02 .Cathode:10 Load request waiting for materials: Anode: 128 Cathode: 61 June 22, 2025 at 12:20 AM, Ngoc zia : Nc ca 2.1 agv10 error June 22, 2025 at 12:35 AM, Ngoc zia : Nc ca #robot 2 error June 22, 2025 at 1:22 AM, 김지수PM(Gyuri)_FA : @fa please check c1stka71 thanks! June 22, 2025 at 2:18 AM, Debreczeni Ármin : @VK (mcs) there is AN material on the following ports P23,P27,P31 Somehow can you send it to line 4/5/6 ? June 22, 2025 at 2:21 AM, VK (mcs) : Checking June 22, 2025 at 2:25 AM, VK (mcs) : Load request for these ports are raised. In case of returning material to stocker, system will again release another carrier to the ports June 22, 2025 at 2:26 AM, Debreczeni Ármin : Okay thank you, and share lot quantity please June 22, 2025 at 2:29 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 181 • Cathode: 03 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:98 GF NC reel Available :- • AN: 76 • CA: 42 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 07 Load request(Exist Jobs) .Anode: 02 .Cathode:04 Load request waiting for materials: Anode: 128 Cathode: 81 June 22, 2025 at 2:40 AM, Ngoc zia : @fa can u come nc ca 5.1 pls. Inline stuck mgz June 22, 2025 at 2:50 AM, Csanálosi Gábor FA : Its okay now June 22, 2025 at 2:58 AM, Ngoc zia : Nc An robot 2 error June 22, 2025 at 3:06 AM, 원재 : This message was deleted. June 22, 2025 at 3:07 AM, 원재 : @FA NC An 2 error plase check June 22, 2025 at 3:07 AM, Böröcz Tamás : Solved June 22, 2025 at 4:15 AM, Hữu Thắng : @FA occurred. Could u please check it . Thanks June 22, 2025 at 4:18 AM, Mykhailo : L5 ST AGV #5 error, please check June 22, 2025 at 4:59 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 192 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:114 GF NC reel Available :- • AN: 119 • CA: 64 ///////////////////////////////////////// VD Unload request .Anode: 01 .Cathode: 09 Load request(Exist Jobs) .Anode: 04 .Cathode:02 Load request waiting for materials: Anode: 132 Cathode: 89 June 22, 2025 at 5:24 AM, Ngoc zia : @FA VD Ca 4-4 MC issue. The door is open. Please return it manually to the Magazine STK-72 warehousing by agv. Thank you June 22, 2025 at 5:28 AM, 김지수PM(Gyuri)_FA : VC01 VC09 were assigned June 22, 2025 at 5:29 AM, Hữu Thắng : @MCS @FA The chamber 6/2 VD AN has an error . Could you please transfer them to KA72 . Thank you June 22, 2025 at 5:35 AM, 김지수PM(Gyuri)_FA : VC01 VC03 were assigned June 22, 2025 at 6:24 AM, P.Bence A SSL : L4-5-6 dont have anode full plate please check @MCS June 22, 2025 at 6:24 AM, P.Bence A SSL : Check again please June 22, 2025 at 6:28 AM, duzzaman Md (MCS) : @FA E0CNVC52_RTV01 is OOS. Please check June 22, 2025 at 6:28 AM, 김정희(Jeong hee FA) : dayshift FA "A" Schedule Date: 2025.06.22 Time:06:00~18:00 GF 최명운 (CHOI Myoungwoon) GF 김정희 (Kim jeong hul) June 22, 2025 at 6:30 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 198 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:128 GF NC reel Available :- • AN: 121 • CA: 49 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 05 Load request(Exist Jobs) .Anode: 04 .Cathode:04 Load request waiting for materials: Anode: 124 Cathode: 108 Thank you June 22, 2025 at 6:34 AM, duzzaman Md (MCS) : Good morning, as we see, no Anode material available. June 22, 2025 at 6:37 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4): Magyar Imre Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 22, 2025 at 6:42 AM, 최명운(CHOI MYOUNGWOON) : @duzzaman Md (MCS) Why aren't 33 full magazines shipped from the GF An KA72 warehouse? June 22, 2025 at 6:48 AM, duzzaman Md (MCS) : Now, there are 3 materials available for delivery. There are total 53 material but those are getting filtered in RTD. Its becoming 53 to 35 because the lot count is not 6 in RTD. Then in the next filter 'WHAT_NEXT_FIILTER_STK_FULL_IN_COMMAND' , its becoming 35 to 10. Then in the very next filter 'WHAT_NEXT_FIILTER_RTD_HOLD' , it's becoming 10 to 3. Thank you June 22, 2025 at 6:59 AM, duzzaman Md (MCS) : @FA please check E0STKC51_C02 Port interface error. Thank you June 22, 2025 at 7:30 AM, duzzaman Md (MCS) : @FA please check C51 C02 mcp ap error Thank you June 22, 2025 at 8:02 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 193 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 01 • Cathode:142 GF NC reel Available :- • AN: 122 • CA: 62 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 04 Load request(Exist Jobs) .Anode: 04 .Cathode:02 Load request waiting for materials: Anode: 120 Cathode: 108 Thank you June 22, 2025 at 8:46 AM, Nguyên : Pls fix plate position on chamber 04(1/4) VD AN GF June 22, 2025 at 8:59 AM, Dariimaa/다리마/Ivancsa : already fixed June 22, 2025 at 9:22 AM, P.Bence A SSL : Check again please June 22, 2025 at 9:26 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 182 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:143 GF NC reel Available :- • AN: 139 • CA: 60 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 04 .Cathode:02 Load request waiting for materials: Anode: 116 Cathode: 104 Thank you June 22, 2025 at 10:27 AM, 조한진(Jin) : @mcs please Check Next Available Lot June 22, 2025 at 10:30 AM, 최명운(CHOI MYOUNGWOON) : @technician GF AN Circular Logistics Air Fitting Broken. Please take technical action. June 22, 2025 at 10:30 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 182 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 05 • Cathode:145 GF NC reel Available :- • AN: 160 • CA: 80 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 04 .Cathode:04 Load request waiting for materials: Anode: 112 Cathode: 108 Thank you June 22, 2025 at 10:39 AM, 최명운(CHOI MYOUNGWOON) : It's done! June 22, 2025 at 10:45 AM, 전 운 (Jeon Woon) : Can you cancel all LRs at 4Line Stack Station? @MCS June 22, 2025 at 10:46 AM, 전 운 (Jeon Woon) : And 4Line AGV Job also June 22, 2025 at 11:27 AM, duzzaman Md (MCS) : Currently no job for line 4 Stacking. Thank you June 22, 2025 at 11:37 AM, Khaliun/Ivancsa FA : @MCS VD AN chamber#6/1 is closed, please check the AGV#3 work. Thank you. June 22, 2025 at 11:41 AM, duzzaman Md (MCS) : Cancelled and sent back. Thank you June 22, 2025 at 11:51 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 164 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 03 • Cathode:159 GF NC reel Available :- • AN: 162 • CA: 71 ///////////////////////////////////////// VD Unload request .Anode: 03 .Cathode: 03 Load request(Exist Jobs) .Anode: 06 .Cathode:00 Load request waiting for materials: Anode: 104 Cathode: 112 Thank you June 22, 2025 at 11:57 AM, Barta Rudi : @FA @duzzaman Md (MCS) Cathode 8021 C0PVC030_08_021 data missmatch error, please check, thank you June 22, 2025 at 12:00 PM, duzzaman Md (MCS) : @FA Please check. Thank you June 22, 2025 at 12:06 PM, Dariimaa/다리마/Ivancsa : Solved June 22, 2025 at 12:26 PM, 권재환 : @duzzaman Md (MCS) We try to return reel from E0STKA51 Manual port 03 but there is CIM Alarm Please check this issue June 22, 2025 at 12:30 PM, duzzaman Md (MCS) : MES error. No lot carrier relation information June 22, 2025 at 12:31 PM, duzzaman Md (MCS) : @MES PLEASE CHECKNTHIS ISSUE June 22, 2025 at 12:43 PM, 권재환 : @최명운(CHOI MYOUNGWOON) @이주봉PM LEE JUBONG(FA) E0STKA51 Manual port 03 CIM Alarm 이후 사용 불가 상태 입니다 확인 부탁드립니다 June 22, 2025 at 12:48 PM, 이주봉PM LEE JUBONG(FA) : 네 확인중입니다. June 22, 2025 at 1:12 PM, 인제(Hwang) : Please reset the password for the RTD “TEMP” ID June 22, 2025 at 1:13 PM, duzzaman Md (MCS) : Done. Thank you June 22, 2025 at 1:15 PM, 인제(Hwang) : Thank you so much June 22, 2025 at 2:07 PM, 전 운 (Jeon Woon) : Please Rechecking June 22, 2025 at 2:13 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 120 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 17 • Cathode:162 GF NC reel Available :- • AN: 156 • CA: 113 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 13 Load request(Exist Jobs) .Anode: 02 .Cathode:02 Load request waiting for materials: Anode: 84 Cathode: 112 Thank you June 22, 2025 at 2:18 PM, 전 운 (Jeon Woon) : Thx! June 22, 2025 at 2:23 PM, Nguyên : Pls request AGV come to chamber #16(2-7) AN for take out plate inside. We need to check chamber error. June 22, 2025 at 2:24 PM, Dariimaa/다리마/Ivancsa : AN CA ?? June 22, 2025 at 2:25 PM, Nguyên : AN June 22, 2025 at 3:11 PM, Dariimaa/다리마/Ivancsa : @FA tech NC CA robot#3 error. Please check Thank you! June 22, 2025 at 3:15 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check GF NC CA Robot#3 Tbanks June 22, 2025 at 3:59 PM, 전 운 (Jeon Woon) : Please Rechecking June 22, 2025 at 4:04 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 88 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 09 • Cathode:173 GF NC reel Available :- • AN: 146 • CA: 116 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 07 Load request(Exist Jobs) .Anode: 08 .Cathode:02 Load request waiting for materials: Anode: 60 Cathode: 124 Thank you June 22, 2025 at 5:18 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 73 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 26 • Cathode:181 GF NC reel Available :- • AN: 128 • CA: 120 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 04 Load request(Exist Jobs) .Anode: 08 .Cathode:04 Load request waiting for materials: Anode: 36 Cathode: 128 Thank you June 22, 2025 at 5:37 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.22 Time: 18:00~ 06:00 1.Assy 이민재(Lee minjae) June 22, 2025 at 5:46 PM, 김현태 : NC AN AGV #5 Error Thanks June 22, 2025 at 5:57 PM, Debreczeni Ármin : @VK (mcs) or @duzzaman Md (MCS) send me newest quantity please June 22, 2025 at 5:57 PM, Shakir (MCS) : Checking June 22, 2025 at 6:01 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.22 "B" műszak, 7+2+4/12+2 Tech, 1SL Overtime(4): Harasztia Zoltán, Gégény Dávid, Kertész Dániel, Fabriczius Gergely Holiday(3): Pintye Miklós, Gerbovits Kevin, Böröczki Balázs Sick(2): Kovács Ágnes, Boromissza Zoltán Shift Change(0): Translater: --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Takács Ádám --------------- Assy 1F (2): Gégény Dávid, Fab June 22, 2025 at 6:03 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 57 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 11 • Cathode:172 GF NC reel Available :- • AN: 144 • CA: 136 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 03 Load request(Exist Jobs) .Anode: 06 .Cathode:04 Load request waiting for materials: Anode: 44 Cathode: 132 Thank you June 22, 2025 at 6:54 PM, Ngoc zia : Nc ca ware housing line 6 light curtain error June 22, 2025 at 7:17 PM, Shakir (MCS) : @Fa Please check MLA2237, at C1STKC72_P01 not moving. Thanks June 22, 2025 at 7:19 PM, Shakir (MCS) : Job terminated by someone, send it STK. Thanks June 22, 2025 at 7:19 PM, Debreczeni Ármin : Send me new again please June 22, 2025 at 7:20 PM, Shakir (MCS) : Checking June 22, 2025 at 7:21 PM, 김지수PM(Gyuri)_FA : @fa please check E0CNV51 > LTC0773(track 8076) is not moving June 22, 2025 at 7:24 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 47 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 67 • Cathode:192 GF NC reel Available :- • AN: 142 • CA: 136 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 05 Load request(Exist Jobs) .Anode: 02 .Cathode:00 Load request waiting for materials: Anode: 60 Cathode: 136 Thank you June 22, 2025 at 7:26 PM, Debreczeni Ármin : 67 post stk AN is real? June 22, 2025 at 7:28 PM, Shakir (MCS) : Yes Now showing AN: 66 CA:190 For ST June 22, 2025 at 7:48 PM, Shakir (MCS) : @FA please check E0STKC51_C01 Load oversize right error Thank you June 22, 2025 at 8:03 PM, 김지수PM(Gyuri)_FA : @Fa please check the MLA9052 C2STKA72_P12 > have to put it down to the P11 manually June 22, 2025 at 8:04 PM, 김지수PM(Gyuri)_FA : First please check the whether cargo is exist on the p12 or not first, thanks! June 22, 2025 at 8:08 PM, 김지수PM(Gyuri)_FA : Solved June 22, 2025 at 8:21 PM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity please Sorry but I will ask many times because our lines starting depend on material post stk AN June 22, 2025 at 8:22 PM, Shakir (MCS) : No problem, you can ask any time, I am checking June 22, 2025 at 8:27 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 58 • Cathode:185 GF NC reel Available :- • AN: 124 • CA: 130 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 01 Load request(Exist Jobs) .Anode: 00 .Cathode:04 Load request waiting for materials: Anode: 80 Cathode: 128 Thank you June 22, 2025 at 9:04 PM, 이한웅(삼구) : please check NC Ca #7 AGV June 22, 2025 at 9:04 PM, Csanálosi Gábor FA : Already done June 22, 2025 at 9:14 PM, Shakir (MCS) : @Debreczeni Ármin GF Next lot quantity available Pre STK > Notching • Anode: 33 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 53 • Cathode:177 GF NC reel Available :- • AN: 125 • CA: 140 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 00 .Cathode:00 Load request waiting for materials: Anode: 88 Cathode: 120 Thank you June 22, 2025 at 10:05 PM, Shakir (MCS) : This message was deleted. June 22, 2025 at 10:10 PM, Shakir (MCS) : @Fa Please check E0STKA52_C02, crane not moving since 21:58. Thank you June 22, 2025 at 10:13 PM, 방혁 PM(Bang.Hyuk) FA : Bcuz for C02 didn't have a order June 22, 2025 at 10:13 PM, 김지수PM(Gyuri)_FA : C02 doesn't have to move June 22, 2025 at 10:14 PM, Shakir (MCS) : Now getting order and moving, Thanks June 22, 2025 at 10:20 PM, Shakir (MCS) : @FA please check E0STKC51_C01 Load oversize right error Thank you June 22, 2025 at 10:36 PM, Kertész Dániel : Done June 22, 2025 at 10:49 PM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity June 22, 2025 at 10:50 PM, Shakir (MCS) : Checking June 22, 2025 at 10:55 PM, Xeng : NC CA agv#8 error June 22, 2025 at 10:59 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 21 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 88 • Cathode:146 GF NC reel Available :- • AN: 127 • CA: 136 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 06 .Cathode:06 Load request waiting for materials: Anode: 108 Cathode: 104 Thank you June 22, 2025 at 11:06 PM, Shakir (MCS) : @FA Please check C1CNV072_16_144 there is Data Mismatch error. Thank you June 22, 2025 at 11:37 PM, 권기홍 : @FA C1CNVA71 5011(P14) UNK CARRIER IS NOT PROCESSING. CHECK PLEASE. June 22, 2025 at 11:43 PM, Shakir (MCS) : @FA please check E0STKA51_C01 Load oversize right error Thank you June 22, 2025 at 11:52 PM, Takács Ádám FA Tech : OOS Solved June 23, 2025 at 12:01 AM June 23, 2025 at 12:01 AM, Ngoc zia : This message was deleted. June 23, 2025 at 12:16 AM, Hữu Thắng : @FA NC AN AGV#4 error . can u plz check it . Thanks June 23, 2025 at 12:24 AM, Debreczeni Ármin : Agv #9 is stopped at in P21 port June 23, 2025 at 12:28 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 22 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 55 • Cathode:132 GF NC reel Available :- • AN: 146 • CA: 158 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 06 Load request(Exist Jobs) .Anode: 06 .Cathode:06 Load request waiting for materials: Anode: 104 Cathode: 104 Thank you June 23, 2025 at 12:45 AM, Kaniz / Ivancsa FA : There is a problem with agv in anode line 1 rewinder 2 June 23, 2025 at 12:46 AM, Hữu Thắng : NC AN AGV#4 errror . Can you please check it June 23, 2025 at 12:46 AM, Szücs Géza FT-B : on assy? June 23, 2025 at 12:48 AM, Hữu Thắng : @FA June 23, 2025 at 12:53 AM, Kaniz / Ivancsa FA : Solved thanks June 23, 2025 at 1:03 AM, Hữu Thắng : NC CA RoBot#1 has an errror . Could unplease check it . Thanks June 23, 2025 at 1:33 AM, Shakir (MCS) : @FA please check E0STKA51_C01 Load oversize right error Thank you June 23, 2025 at 1:56 AM, 이한웅(삼구) : please check NC Ca #3 AGV June 23, 2025 at 2:06 AM, Hữu Thắng : @FA NC AN Agv#9 stopped . Plz check . thanks June 23, 2025 at 2:17 AM, Debreczeni Ármin : @Shakir (MCS) you know what I intrested? June 23, 2025 at 2:18 AM, Shakir (MCS) : Checking June 23, 2025 at 2:20 AM, Debreczeni Ármin : Thank you June 23, 2025 at 2:21 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 03 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 49 • Cathode:128 GF NC reel Available :- • AN: 144 • CA: 174 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 13 Load request(Exist Jobs) .Anode: 06 .Cathode:06 Load request waiting for materials: Anode: 84 Cathode: 104 Thank you June 23, 2025 at 3:37 AM, Hữu Thắng : @FA NC AN AGV#9 error . Plz check June 23, 2025 at 3:41 AM, Csanálosi Gábor FA : Done June 23, 2025 at 3:59 AM, Hữu Thắng : @MCS Can you plz check LR NC AN 2/3 . The machine waiting empty magazines very long time . Thank you June 23, 2025 at 4:02 AM, Shakir (MCS) : Press LR please June 23, 2025 at 4:02 AM, Shakir (MCS) : @FA Please check E0CNVA52_RTV Run time error. Thank you June 23, 2025 at 4:07 AM, Hữu Thắng : Can you recheck thanks June 23, 2025 at 4:08 AM, Shakir (MCS) : LR received, but no material available at gantry output port. As soon as material available job will initiated. Thank you June 23, 2025 at 4:08 AM, Hữu Thắng : Okay . Thank you June 23, 2025 at 4:58 AM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity Thank you June 23, 2025 at 4:59 AM, Shakir (MCS) : Checking June 23, 2025 at 5:02 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 13 • Cathode: 10 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 24 • Cathode:117 GF NC reel Available :- • AN: 151 • CA: 174 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 08 Load request(Exist Jobs) .Anode: 06 .Cathode:02 Load request waiting for materials: Anode: 68 Cathode: 96 Thank you June 23, 2025 at 5:16 AM, Szücs Géza FT-B : @MCS LTA0066 is a wrong reel tray. if it is full everytime stuck on cnva51. Please notify the FA if the tray reaches port "M" in the NC area. It must be removed from there. June 23, 2025 at 5:23 AM, Shakir (MCS) : As I see LTA0066 currently inside STKA52 at (0101202). Just now completed job. June 23, 2025 at 5:26 AM, Shakir (MCS) : CNVA51 working normal, nothing stuck Thank you June 23, 2025 at 5:34 AM, Hữu Thắng : @FA NC AN Agv#9 alarm . Plz check June 23, 2025 at 5:56 AM, Hữu Thắng : NC AN AGV#5 stopped . Plz check it June 23, 2025 at 6:00 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13 Overtime (0): Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(2) Oláh András , Kiss Balázs Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid, Magyar Balázs June 23, 2025 at 6:12 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Good morning, Please check C1STKC72(9016) there is INV-01 Runtime Over error and job for MLC4173 is pending. Thank you very much! June 23, 2025 at 6:25 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 it is OOs and it is blocking reels delivery. Thank you very much! June 23, 2025 at 6:36 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 23, 2025 at 6:36 AM, Mohammad Amir : Good morning Sir, Sure ! June 23, 2025 at 6:39 AM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 22 • Cathode: 124 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 05 • Cathode:87 GF NC reel Available :- • AN: 141 • CA: 180 ///////////////////////////////////////// VD Unload request .Anode: 24 .Cathode: 07 Load request(Exist Jobs) .Anode: 06 .Cathode:04 Load request waiting for materials: Anode: 76 Cathode: 90 June 23, 2025 at 7:01 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Good morning, Please check C1STKC72(9016) there is Data mismatch error and job for MLC3110 is pending. Thank you very much! June 23, 2025 at 7:03 AM, Dariimaa/다리마/Ivancsa : Solved June 23, 2025 at 7:05 AM, Mohammad Amir : Thank you very much! June 23, 2025 at 7:27 AM, 은향(OH EUN HYANG) : @Hungarian Technician Please come to GFCNC. June 23, 2025 at 7:38 AM, Novák Károly F. A. : Solved June 23, 2025 at 7:57 AM, Dariimaa/다리마/Ivancsa : @Amir good morning ST AN C1CNV072_P31 MLA6236 has not moved for a long time. Please check. Thank you! June 23, 2025 at 7:58 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it,it is decreasing stacking materials delivery speed. Thank you June 23, 2025 at 7:58 AM, Mohammad Amir : Good Morning @Dariimaa/다리마/Ivancsa Sure, I am checking what is the issue. Thank you very much! June 23, 2025 at 8:03 AM, Mohammad Amir : Issue has been resolved ✅. Soon AGV will pick the material. I am monitoring. Thank you very much! June 23, 2025 at 8:06 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa Update:- AGV#6 has been assigned to pick the material. Thank you very much! June 23, 2025 at 8:07 AM, Dariimaa/다리마/Ivancsa : Okey. Thank you very much! June 23, 2025 at 8:08 AM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any assistance. June 23, 2025 at 8:13 AM, Mohammad Amir : @Manufacturing Please confirm me is there any carrier physically exists on VD AN 5-5 P01? Thank you very much! June 23, 2025 at 8:15 AM, Nguyen Huy : @Mohammad Amir hello, VD CA 3-7 half chamber occurred since 10:33 yesterday, pls check this asap, thank you June 23, 2025 at 8:15 AM, Mohammad Amir : Sure Checking! June 23, 2025 at 8:20 AM, Mohammad Amir : Good morning, The reason is that there is no Request for materials for VD CA 3-7. And please check as well with manufacturing cause this chamber is in Manual mode since 20:41 since yesterday so even if there will be request , materials will not be delivered. Please confirm with manufacturing the reason for Manual and after set it to auto and request LR. Thank you very much! June 23, 2025 at 8:21 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. C1STKA72 (0205805, 0105803, 0105505, 0100103, 0105806) C1STKC72 (0100207, 0205905) June 23, 2025 at 8:32 AM, Mohammad Amir : @FA Please check C1CNV072_16_144 there is Data Mismatch error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 23, 2025 at 8:33 AM, Mohammad Amir : @Dariimaa/다리마/Ivancsa Please check this issue. Thank you very much! June 23, 2025 at 8:33 AM, Sazzad Bhai SKon : @FA All Magazine ID is duplicated in this plate: MLC1247 (C1STKC72, 0205603) Please confirm the magazines: MC1200, MC4267, MC6199, MC4339, MC3527, MC3299 June 23, 2025 at 8:38 AM, 연해리 : Could we know where those DUP MGZs are located in? June 23, 2025 at 8:39 AM, Sazzad Bhai SKon : MLC1247 (C1STKC72, 0205603) June 23, 2025 at 8:40 AM, Sazzad Bhai SKon : If you check this plate, and most probably the magazine ID will be different. So no need to check other Plates. June 23, 2025 at 8:40 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 34 • Cathode: 27 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 14 • Cathode:68 GF NC reel Available :- • AN: 145 • CA: 173 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 01 Load request(Exist Jobs) .Anode: 04 .Cathode:04 Load request waiting for materials: Anode: 96 Cathode: 102 Thank you very much! June 23, 2025 at 8:46 AM, Sazzad Bhai SKon : @FA All Magazine ID is duplicated in this plate: MLC6034 (C1STKC71, 0100201) Please confirm the magazines: MC2146, MC2181, MC2501, MC3288, MC3352, MC3166 June 23, 2025 at 9:04 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check UNK carrier located at C1 NV072_16_153,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue physically on priority. Thank you very much! June 23, 2025 at 9:07 AM, Dariimaa/다리마/Ivancsa : Solved June 23, 2025 at 9:07 AM, Mohammad Amir : Thank you very much 🙏 June 23, 2025 at 9:26 AM, 이도형 (Lee) : @FA VD An #2 AGV is stopped. Please check June 23, 2025 at 9:38 AM, Oláh András : @FA Please check E0CNVA51_06_016/17 there is INV-01 Run time Over error and it is blocking materials recovery. Thank you very much! June 23, 2025 at 9:40 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 it is OOs and it is blocking reels delivery. Thank you very much! June 23, 2025 at 9:42 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+4 carriers from it,it is decreasing stacking materials delivery speed. Thank you June 23, 2025 at 9:43 AM, Mohammad Amir : @Manufacturing Please confirm me is there any carrier physically exists on VD AN 5-5 P01? Thank you very much! June 23, 2025 at 9:44 AM, Sazzad Bhai SKon : @FA There are 42 Plates on hold state due to carrier id UNKDUP and magazine duplicated issue. So, please take action June 23, 2025 at 9:46 AM, Dariimaa/다리마/Ivancsa : C1STKA72_M02 MLA6220 MCS Buzzer alarm. Please check Thank you! June 23, 2025 at 9:46 AM, Mohammad Amir : Sure Checking! June 23, 2025 at 9:48 AM, Mohammad Amir : There is an issue ,it is not possible to return from here. Please try with C1STKA71_M01. Thank you very much! June 23, 2025 at 9:52 AM, Dariimaa/다리마/Ivancsa : STK71 returned June 23, 2025 at 9:53 AM, Mohammad Amir : Yes,Job has started successfully ✅. Thank you very much! June 23, 2025 at 10:02 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. @Dariimaa/다리마/Ivancsa Please check MLC2240 carrier located at C1 NV072_16_065 ,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue physically on priority. Thank you very much! June 23, 2025 at 10:06 AM, Dariimaa/다리마/Ivancsa : Done June 23, 2025 at 10:19 AM, Zsolt F.A. : MC1149, MC4474,MC5073,MC1466,MC2286,MC2319 June 23, 2025 at 10:21 AM, Sazzad Bhai SKon : Thank you, magazine id are different. So please restock June 23, 2025 at 10:33 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1STKA72_C01 there is Travel First Movement error and it has blocked AN stacking materials delivery. Please check the issue on priority. Thank you very much! June 23, 2025 at 10:48 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 38 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 04 • Cathode:81 GF NC reel Available :- • AN: 148 • CA: 181 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 01 Load request(Exist Jobs) .Anode: 06 .Cathode:04 Load request waiting for materials: Anode: 76 Cathode: 110 Thank you very much! June 23, 2025 at 11:14 AM, 김동섭 : GF CA VD 3-7 진공펌프 해결 후 LR 올렸습니다 June 23, 2025 at 11:16 AM, Mohammad Amir : Sir, I confirm,we received LR successfully at 11:13 , currently we don't have enough material in warehouse as soon as material will be available it will go to VD CA 3-7. Thank you very much! June 23, 2025 at 11:16 AM, Sazzad Bhai SKon : These are again duplicated. Please check the plate id and then restock. If you find plate id are same please let us know. UNKDUP-MLA6105-A (C1STKA71, 0205203) UNKDUP-MLA6105-B (C1STKA71, 0100204) UNKDUP-MLA6240-B (C1STKA72, 0105804) UNKDUP-MLA6236-B (C1STKA72, 0105604) UNKDUP-MLA6108-B (C1STKA72, 0205703) UNKDUP-MLC1003 (C1STKC72, 0205905) June 23, 2025 at 11:17 AM, Mohammad Amir : @FA Please check E0STKA51/52_C02 there is Port interface error. Thank you very much! June 23, 2025 at 11:18 AM, Sazzad Bhai SKon : We don't see any log it was racked out from manual port. MLC6034 needs be rack out from manual port and restock. Thank you June 23, 2025 at 11:19 AM, Zsolt F.A. : That belongs to manufactoring/operation. June 23, 2025 at 11:20 AM, Sazzad Bhai SKon : @manufacturing please check the plate June 23, 2025 at 11:28 AM, Kiss Balázs F.A. left this chatroom. June 23, 2025 at 11:32 AM, Dániel Hufnágel invited Kiss Balázs F.A.. June 23, 2025 at 11:47 AM, Sazzad Bhai SKon : @FA RTV is not taking the tray for long time. Please check. E0CNVA52_07_009 June 23, 2025 at 11:56 AM, Mohammad Amir : @FA @Dariimaa/다리마/Ivancsa Please check C1CNV072_P17 there is Data loss Error and it is blocking stacking materials delivery. Thank you very much! June 23, 2025 at 12:04 PM, Nguyen Huy : @FA NC CA Robot #2 data mismatch error, pls check June 23, 2025 at 12:19 PM, Zsurbej Zsolt F.A. : @ (MCS/RTD) We took out plate MLC5833 from C0PVC020_08_042 port The plate handle is damaged! June 23, 2025 at 12:20 PM, Mohammad Amir : Thank you very much for informing us. Information has been updated successfully in MCS and RTD database ✅. June 23, 2025 at 12:28 PM, Zsurbej Zsolt F.A. : Solved June 23, 2025 at 1:13 PM, 정은탁 (Jung EunTak) : @FA NC An 6-3 AGV #9 UR Error. Please Check. June 23, 2025 at 1:34 PM, Mohammad Amir : @Manufacturing Please confirm me is there any carrier physically exists on VD AN 5-5 P01? Thank you very much! June 23, 2025 at 1:39 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 48 • Cathode: 50 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:51 GF NC reel Available :- • AN: 154 • CA: 175 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode: 08 .Cathode:02 Load request waiting for materials: Anode: 80 Cathode: 108 Thank you very much! June 23, 2025 at 1:46 PM, 김동섭 : GF AN VD 3-5 좌측상단 안착불량 입니다 AGV 로 재안착 부탁드립니다 June 23, 2025 at 1:47 PM, 김동섭 invited 박강민. June 23, 2025 at 2:08 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please do it June 23, 2025 at 2:09 PM, 김동섭 : 지금 조치중 입니다 June 23, 2025 at 2:26 PM, Mohammad Amir : @Manufacturing Please confirm me is there any carrier physically exists on VD AN 5-5 P01? Thank you very much! June 23, 2025 at 2:30 PM, 김동섭 : MLA6079 있습니다 June 23, 2025 at 2:31 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! June 23, 2025 at 2:31 PM, 김동섭 : P1 MLA6079 P2 MLA6187 P3 MLA1113 P4 MLA0014 존재 합니다 June 23, 2025 at 2:40 PM, Sazzad Bhai SKon : But MLA6079 is already stored at the STK at 14:21 June 23, 2025 at 2:43 PM, Sazzad Bhai SKon : There was UR from 2-5 line for the same carrier. So it might case that the plate is duplicated June 23, 2025 at 2:43 PM, Mohammad Amir : @FA Please rack out the carrier located at C1STKA72(0100106) from Manual port and afterwards please rackin again. Thank you very much! June 23, 2025 at 2:46 PM, Sazzad Bhai SKon : @FA please confirm if the plate MLA6079 is located this Shelf. And also VD AN 5-5 line P01 June 23, 2025 at 2:47 PM, KIM SEYEON [김세연]_FA : @이주봉PM LEE JUBONG(FA) @지석범PM (이반차FA) @은향(OH EUN HYANG) @김종원 피엠님 MLA6079 중복 플레이트인지 확인부탁드립니다. June 23, 2025 at 2:51 PM, Mohammad Amir : This message was deleted. June 23, 2025 at 2:52 PM, Mohammad Amir : @FA Please check C1CNV072_16_123 there is Run Time over error and it is blocking stacking materials delivery. Thank you very much! June 23, 2025 at 3:02 PM, Dariimaa/다리마/Ivancsa : Manual port and chamber 5-5 ID are the same. June 23, 2025 at 3:03 PM, Sazzad Bhai SKon : Then please keep the plate out of the warehouse. Pm will check it June 23, 2025 at 3:09 PM, 은향(OH EUN HYANG) : 음극V D 5-5에 있고 후창고MO2 에도 있읍니다 June 23, 2025 at 3:09 PM, KIM SEYEON [김세연]_FA : 물리적으로 동일 바코드란 말씀이시죠? June 23, 2025 at 3:09 PM, 은향(OH EUN HYANG) : 네 June 23, 2025 at 3:11 PM, 은향(OH EUN HYANG) : 우선 후창고에서 뺀거는 현장에 빼놓을게요 June 23, 2025 at 3:11 PM, KIM SEYEON [김세연]_FA : 네 제조에 인계하여주십시오 June 23, 2025 at 3:13 PM, KIM SEYEON [김세연]_FA : @심재훈 @정다은 피엠님 중복 바코드가 많아서 어려움이 있습니다. VD미건조도 해당 원인으로 발생할수 있습니다. 조치를 위한 실행 Action이 필요합니다. June 23, 2025 at 3:18 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+4 carriers from it,it is decreasing stacking materials delivery speed. Thank you June 23, 2025 at 3:23 PM, Mohammad Amir : @Manufacturing Please check now there are 1+5 carriers waiting. Thank you very much! June 23, 2025 at 3:26 PM, Mohammad Amir : @FA Please check E0CNVC52_9020 there is Tray abnormal error. Thank you very much! June 23, 2025 at 3:34 PM, P.Bence A SSL : Please check again June 23, 2025 at 3:34 PM, Mohammad Amir : Sure, Checking! June 23, 2025 at 3:39 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 82 • Cathode: 54 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:24 GF NC reel Available :- • AN: 155 • CA: 162 ///////////////////////////////////////// VD Unload request .Anode: 03 .Cathode: 03 Load request(Exist Jobs) .Anode: 00 .Cathode:04 Load request waiting for materials: Anode: 92 Cathode: 92 Thank you very much! June 23, 2025 at 3:51 PM, Mohammad Amir : @FA Please check E0CNVA52_07_012 it is in Manual mode hence OOS and it is blocking reels delivery. Please make it Auto. Thank you very much! June 23, 2025 at 3:54 PM, Zsurbej Zsolt F.A. : A Korean technician is working on it. June 23, 2025 at 3:54 PM, Mohammad Amir : Thank you very much for the information! June 23, 2025 at 4:11 PM, Sazzad Bhai SKon : @FA All Magazine ID is duplicated in this plate: MLC1247 (C1STKC72, 0205603) Please confirm the magazines: MC1200, MC4267, MC6199, MC4339, MC3527, MC3299 Several plates are in hold state due to the duplicated issue June 23, 2025 at 4:12 PM, Mohammad Amir : @Manufacturing Please check now and take action ,now there are 1+8carriers waiting,it is causing traffic on the circular CNV and resulting in significant decrease in speed of stacking materials delivery. Thank you very much! June 23, 2025 at 4:16 PM, P.Bence A SSL : @Mohammad Amir Please delete all Job Line 2 stacking June 23, 2025 at 4:16 PM, Mohammad Amir : Sure Checking! June 23, 2025 at 4:18 PM, Mohammad Amir : All jobs have been cancelled successfully ✅ which were in the machines. One job was on the AGV so cancelled the Job and send the Carrier back to STK. Thank you very much! June 23, 2025 at 4:18 PM, Dariimaa/다리마/Ivancsa : MLC4207 magazines: MC4247, MC1163, MC2218, MC4270, MC1322, MC4147 June 23, 2025 at 4:20 PM, Sazzad Bhai SKon : Yes the magazines id are different. Please restock now June 23, 2025 at 4:24 PM, Mohammad Amir : @Manufacturing Please check now and take action ,now there are 1+9 carriers waiting,it is causing traffic on the circular CNV and resulting in significant decrease in speed of stacking materials delivery. Thank you very much! June 23, 2025 at 4:25 PM, Dariimaa/다리마/Ivancsa : Done June 23, 2025 at 4:27 PM, Mohammad Amir : @FA Please Check E0STKA51 _C01/C02 there is Light Curtain detected error and it is blocking reels delivery. Please check on Priority. Thank you very much! June 23, 2025 at 4:28 PM, 카스텔 발라지 F.A. : @P.Bence A SSL nézzétek meg kérlek, nagyban lassítja nektek az anyagáramlást. Köszönöm! June 23, 2025 at 4:29 PM, Mohammad Amir : @P.Bence A SSL Please take action on this ,stacking materials delivery speed has been decreased significantly. Thank you very much! June 23, 2025 at 4:29 PM, Mohammad Amir : Thank you very much! June 23, 2025 at 4:30 PM, Sazzad Bhai SKon : @FA This ID are still in hold state (reason: duplicated) So please check June 23, 2025 at 4:36 PM, Mohammad Amir : @Manufacturing @김동섭 Please check and confirm me is there any physical carrier exists on VD CA 3-9 P01? Thank you very much! June 23, 2025 at 4:39 PM, 김동섭 : P1 MLC6034 P2 MLC4115 P3 MLC3021 P4 MLC2203 존재 합니다 공정진행중 입니다. June 23, 2025 at 4:42 PM, Mohammad Amir : @FA Please check it is suspected MLC6034 is duplicated. Please Rackout manual port MLC6034 ,it is located at C1STKC71(020023) and also check Carrier located at VD CA 3-9 P01(According to manufacturing team it is also MLC6034). Please check and confirm us. Thank you very much! June 23, 2025 at 4:43 PM, 심재훈 : Agv1 번 벽하고 붙어서 알람 울리고 있습니다.확인 부탁 드립니다. 양극입니다. June 23, 2025 at 4:44 PM, KIM SEYEON [김세연]_FA : 혹시 룸이 어딘가요? June 23, 2025 at 4:44 PM, Mohammad Amir : @Dariimaa/다리마/Ivancsa Could you please check this issue as well. Thank you very much! June 23, 2025 at 4:44 PM, 심재훈 : 방금 움직었습니다. 몇번 알람 울리더니 다시 움직이네요 June 23, 2025 at 4:45 PM, Dariimaa/다리마/Ivancsa : MLA6105 is duplicated. June 23, 2025 at 4:47 PM, Sazzad Bhai SKon : @KIM SEYEON [김세연]_FA hello pm, MLA6105 is duplicated. June 23, 2025 at 4:51 PM, Dariimaa/다리마/Ivancsa : The IDs of the two sides of the material on the M02 manual port are different. MLC0187 MLC6034 June 23, 2025 at 4:51 PM, Nguyen Huy : @FA @MCS Pls request AGV to take out materials from chamber 5-2 VD CA and send it back to C71 warehouse, we need to change this chamber sensor, thank you June 23, 2025 at 4:52 PM, Mohammad Amir : Sure Checking! June 23, 2025 at 4:52 PM, Mohammad Amir : Checking June 23, 2025 at 4:54 PM, Mohammad Amir : Jobs have been created to send these pallets to post VD STK successfully ✅. AGV#7 and AGV#2 has been assigned successfully ✅. I am monitoring. Thank you very much! June 23, 2025 at 4:56 PM, Nguyen Huy : Appreciate it!! June 23, 2025 at 4:58 PM, Mohammad Amir : As I checked MLC0187 located at C1CNV072_P01 , please check this carrier as well. Thank you very much! June 23, 2025 at 4:58 PM, Mohammad Amir : You are welcome! June 23, 2025 at 5:00 PM, Mohammad Amir : Please take it out from the Manual port and check the carrier id and confirm me. Thank you very much! June 23, 2025 at 5:23 PM, Mohammad Amir : @FA Please check VD CA AGV#1 it is in error and that's why unloading is getting delayed. Thank you very much! June 23, 2025 at 5:33 PM, Mohammad Amir : AGV#5 also check, please! June 23, 2025 at 5:41 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 23, 2025 at 5:41 PM, Mohammad Amir : Sure Sir Checking! June 23, 2025 at 5:44 PM, Mohammad Amir : Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 80 • Cathode: 40 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 07 • Cathode:61 GF NC reel Available :- • AN: 183 • CA: 154 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode: 08 .Cathode:08 Load request waiting for materials: Anode: 108 Cathode: 80 June 23, 2025 at 5:44 PM, 은향(OH EUN HYANG) : MLA6105 중복아이디로 음극VD 에빼놓은후 제조에 인계했읍니다 June 23, 2025 at 6:04 PM, KIM SEYEON [김세연]_FA : 06.23 Night shift 1F -Chinges (All) GF -YonKo (An.ST) -Zaya (Ca.ST) -Uynga (VD) -Ankhaa (NC) June 23, 2025 at 6:04 PM, 김지수PM(Gyuri)_FA : @fa please check E0STKA51 6103 track > output H/S off June 23, 2025 at 6:06 PM, KIM SEYEON [김세연]_FA : @Zaya/ivancsa FA @Yon Ko/연커/ gf st conveyor 4.5.6line erorr June 23, 2025 at 6:08 PM, Shakir (MCS) : Good evening @FA please check C51 C02 mcp ap error Thank you June 23, 2025 at 6:10 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(4 Döme György Denkó János Harasztia Zoli Sarvajcz Ferenc June 23, 2025 at 6:12 PM, Shakir (MCS) : @Lajos Gábor F.A. June 23, 2025 at 6:20 PM, Shakir (MCS) : Good evening @All GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 44 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 01 • Cathode:46 GF NC reel Available :- • AN: 183 • CA: 148 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 23 Load request(Exist Jobs) .Anode: 00 .Cathode:08 Load request waiting for materials: Anode: 96 Cathode: 76 June 23, 2025 at 6:35 PM, Lajos Gábor F.A. : Done June 23, 2025 at 6:45 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_049, Run time over error. Thank you June 23, 2025 at 6:48 PM, Shakir (MCS) : @FA Please check E0STKC51_C02, MCP AP Error. Thank you June 23, 2025 at 6:54 PM, Lajos Gábor F.A. : Done June 23, 2025 at 7:13 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot June 23, 2025 at 7:15 PM, Shakir (MCS) : Checking sir June 23, 2025 at 7:19 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 46 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 06 • Cathode:28 GF NC reel Available :- • AN: 166 • CA: 150 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 06 Load request(Exist Jobs) .Anode: 10 .Cathode:14 Load request waiting for materials: Anode: 104 Cathode: 92 June 23, 2025 at 7:28 PM, KIM SEYEON [김세연]_FA : @Lajos Gábor F.A. please check pre VD Stacker Crane CA June 23, 2025 at 8:01 PM, Shakir (MCS) : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it. Thank you June 23, 2025 at 8:05 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD MCS/RTD please share available lot June 23, 2025 at 8:05 PM, 박시우 : @FA Please check NC AN AGV VC06 Obstacle detected for a while June 23, 2025 at 8:08 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 34 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 23 • Cathode:38 GF NC reel Available :- • AN: 164 • CA: 149 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 13 Load request(Exist Jobs) .Anode: 06 .Cathode:10 Load request waiting for materials: Anode: 108 Cathode: 96 June 23, 2025 at 8:19 PM, Hữu Thắng : @MCS @FA NC CA RTV Tray ID LOSS . Can you please check it . Thanks June 23, 2025 at 8:19 PM, Shakir (MCS) : @Fa Please check June 23, 2025 at 8:27 PM, Shakir (MCS) : @FA Could you please check the carrier MLA6057 located at C1STKA71(0100203), RackIn at 20:18. it is suspected MLA6057 is duplicated. Please Rackout manual port, this carrier also exists at C2CNV072_P31 Please check and confirm us. Thank you June 23, 2025 at 8:34 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 38 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 16 • Cathode:49 GF NC reel Available :- • AN: 156 • CA: 132 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 09 Load request(Exist Jobs) .Anode: 06 .Cathode:04 Load request waiting for materials: Anode: 104 Cathode: 104 June 23, 2025 at 8:37 PM, 이한웅(삼구) : Please check NC An RTV June 23, 2025 at 8:38 PM, QuangPhan : Hello! @FA Nc An 6/3 AGV #5 error. Thanks June 23, 2025 at 8:39 PM, Shakir (MCS) : @FA Please check E0CNVA52_RTV01 Run time error. Thank you June 23, 2025 at 8:40 PM, Zaya/ivancsa FA : port not ready June 23, 2025 at 8:41 PM, Zaya/ivancsa FA : solved June 23, 2025 at 8:42 PM, Kertész Dániel : Done June 23, 2025 at 8:46 PM, QuangPhan : Thank you June 23, 2025 at 9:34 PM, 이한웅(삼구) : Do you know the reason why the CIM alarm occurs for E0STKA51_M04 LTA0860 EA1P073F511P8311A? @Shakir (MCS) June 23, 2025 at 9:37 PM, Shakir (MCS) : Alarm occurs because this lot already been received from Warehouse. June 23, 2025 at 9:37 PM, Shakir (MCS) : MES error June 23, 2025 at 9:39 PM, 이한웅(삼구) : thank you! June 23, 2025 at 9:54 PM, QuangPhan : Hello! @FA Nc An 3/2 AGV #9 error. Thanks June 23, 2025 at 10:03 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 58 • Cathode: 32 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 04 • Cathode:54 GF NC reel Available :- • AN: 155 • CA: 141 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 09 Load request(Exist Jobs) .Anode: 04 .Cathode:02 Load request waiting for materials: Anode: 96 Cathode: 96 June 23, 2025 at 10:05 PM, Lajos Gábor F.A. : @MCS Could you modify AN NC AGV 9 order? C3NCA020_p04 have empty magazines and agv cant unload June 23, 2025 at 10:06 PM, Shakir (MCS) : Checking June 23, 2025 at 10:07 PM, Shakir (MCS) : @FA please check E0STKC51_C01 Load oversize right error Thank you June 23, 2025 at 10:07 PM, Lajos Gábor F.A. : Now it changed to C3NCA010_P03 June 23, 2025 at 10:09 PM, Shakir (MCS) : Now, AGV09 unloaded magazine to NC 3-1 June 23, 2025 at 11:15 PM, QuangPhan : Hello! @Shakir (MCS) Currently, AGV work to get full mgz on NC AN is very slow. Please check. June 23, 2025 at 11:18 PM, Shakir (MCS) : @FA Please check Robot 1 AN NC Thanks June 23, 2025 at 11:18 PM, 방혁 PM(Bang.Hyuk) FA : Checking June 23, 2025 at 11:26 PM, Shakir (MCS) : @FA Please check Robot2 NC AN Thanks June 23, 2025 at 11:31 PM, Shakir (MCS) : Jobs have been created for full mgz pickup successfully For 3-1 NC AN,AGV#7 has assigned. For 3-2 NC AN,AGV#5 has assigned. For 2-2 NC AN,AGV#9 has assigned. For 2-1 AGV#8 has assigned. Currently all AGVs re busy that's why you are facing delay. Thank you June 23, 2025 at 11:39 PM, Yaroslav SL/C 6 line : @mcs please share available lot June 23, 2025 at 11:40 PM, Shakir (MCS) : Checking June 23, 2025 at 11:43 PM, Kateryna SSL C : Hello! Could you please update? Thank you! June 23, 2025 at 11:43 PM, Shakir (MCS) : @Yaroslav SL/C 6 line GF Next lot quantity available Pre STK > Notching • Anode: 68 • Cathode: 25 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:35 GF NC reel Available :- • AN: 154 • CA: 121 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 11 Load request(Exist Jobs) .Anode: 06 .Cathode:08 Load request waiting for materials: Anode: 96 Cathode: 72 June 24, 2025 at 12:24 AM June 24, 2025 at 12:24 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 69 • Cathode: 21 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 05 • Cathode:39 GF NC reel Available :- • AN: 152 • CA: 126 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 02 Load request(Exist Jobs) .Anode: 06 .Cathode:02 Load request waiting for materials: Anode: 92 Cathode: 68 June 24, 2025 at 12:35 AM, Hữu Thắng : @MCS @FA VD CA Line 3-7 the chamber has an error . Techcian would like to repair the chamber Could you please transfer these magazines to KC72 . Thank you June 24, 2025 at 12:36 AM, Shakir (MCS) : Could you make the chamber in Auto mode, afterwards command created from MCS can be successful. Thank you! June 24, 2025 at 12:40 AM, Hữu Thắng : Done . Thank you for your help June 24, 2025 at 12:42 AM, Shakir (MCS) : Job has been initiated successfully to STK ✅ Thank you June 24, 2025 at 1:34 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_053/52 run time over error. Thank you June 24, 2025 at 2:20 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 53 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 03 • Cathode:47 GF NC reel Available :- • AN: 160 • CA: 119 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 05 Load request(Exist Jobs) .Anode: 06 .Cathode:18 Load request waiting for materials: Anode: 92 Cathode: 59 June 24, 2025 at 3:18 AM, Yon Ko/연커/ : This message was deleted. June 24, 2025 at 3:19 AM, Yon Ko/연커/ : This message was deleted. June 24, 2025 at 3:23 AM, Shakir (MCS) : @Yon Ko/연커/ Could you please confirm that 2-6 chamber is empty. June 24, 2025 at 3:23 AM, Yon Ko/연커/ : Yes that chamber is Empty. June 24, 2025 at 3:26 AM, Shakir (MCS) : Job Cancelled, Thanks June 24, 2025 at 3:47 AM, 원재 : @FA NC An Agv stop check please June 24, 2025 at 3:48 AM, 방혁 PM(Bang.Hyuk) FA : @Yon Ko/연커/ June 24, 2025 at 4:24 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 28 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 20 • Cathode:67 GF NC reel Available :- • AN: 139 • CA: 129 ///////////////////////////////////////// VD Unload request .Anode: 11 .Cathode: 04 Load request(Exist Jobs) .Anode: 06 .Cathode:04 Load request waiting for materials: Anode: 71 Cathode: 78 June 24, 2025 at 4:57 AM, Shakir (MCS) : @FA Please check C1CNV072_16_126 there is Data mismatch error. Thank you June 24, 2025 at 5:14 AM, Shakir (MCS) : @FA Please check C1STKA72_C01 there is Load Oversize error. Thank you June 24, 2025 at 5:39 AM, Hữu Thắng : @FA GF NC CA RTV STP-01-UP Cynlinder Error . Can u plz check it . June 24, 2025 at 5:42 AM, Ivan Chobitko : Good morning Share again please June 24, 2025 at 5:42 AM, Shakir (MCS) : Checking June 24, 2025 at 5:46 AM, Mohammad Amir : Good morning, GF Next lot quantity available Pre STK > Notching • Anode: 29 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 08 • Cathode:68 GF NC reel Available :- • AN: 137 • CA: 115 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 00 Load request(Exist Jobs) .Anode: 04 .Cathode:08 Load request waiting for materials: Anode: 69 Cathode: 62 Thank you very much! June 24, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/13+1 Overtime (1): Cehman Zsolt Sick (0):- Holiday (1):Szabadi Miklós Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Cehman Zsolt Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(3): Nagy Gábor, Martina Dávid, Magyar Balázs June 24, 2025 at 6:04 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Good morning, Please check E0CNVC52_RTV01 it is OOS and reels delivery has completely stopped. Thank you very much! June 24, 2025 at 6:05 AM, 카스텔 발라지 F.A. : Good morning, we are on the way June 24, 2025 at 6:05 AM, Mohammad Amir : Thank you very much! June 24, 2025 at 6:27 AM, Mohammad Amir : @Manufacturing @김동섭 Good morning, Please check and confirm,what is the actual carrier exists on VD AN 6-8 P04? Thank you very much! June 24, 2025 at 6:45 AM, 카스텔 발라지 F.A. : MLA6078 but now this plate is in the AGV#6 June 24, 2025 at 6:48 AM, Mohammad Amir : Thank you very much for the confirmation! June 24, 2025 at 7:04 AM, Mohammad Amir : @FA Please check C1STKC71_C01/C02 it is in offline mode . Thank you very much! June 24, 2025 at 7:27 AM, Mohammad Amir : @FA Please check C1CNV072_16_155/159 there is Run Time over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! June 24, 2025 at 7:28 AM, Dariimaa/다리마/Ivancsa : Solved June 24, 2025 at 7:28 AM, Mohammad Amir : Thank you very much 🙏. June 24, 2025 at 7:29 AM, Nguyen Huy : @Mohammad Amir VD CA half chamber occurred, pls check @FA And pls send AGV to take out materials from chamber 5-2 VD Ca and send it back to C71 warehouse, we need to check this chamber, thank you June 24, 2025 at 7:29 AM, Mohammad Amir : Sure, working on it. June 24, 2025 at 7:32 AM, Mohammad Amir : Good morning, Jobs have been created successfully to tranfer materials from VD CA 5-2 chamber to post VD STK. ✅. Now,I am checking second issue. Thank you very much! June 24, 2025 at 7:33 AM, Mohammad Amir : For VD CA 5-1, There is an Active LR however we don't have enough Materials available in warehouse. Please let me know if you need further assistance. Thank you very much! June 24, 2025 at 7:34 AM, Lika : Hello,4 line 6-5 stacking AGV 2 Alarm June 24, 2025 at 7:36 AM, Nguyen Huy : Thank you for your help!! June 24, 2025 at 7:36 AM, Mohammad Amir : You are most welcome! June 24, 2025 at 7:37 AM, Dariimaa/다리마/Ivancsa : Solved June 24, 2025 at 7:50 AM, Mohammad Amir : @FA Please check VD CA AGV#1 there is LD UD req not received error and it is delaying the unloading jobs. Thank you very much! June 24, 2025 at 7:59 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 32 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 19 • Cathode:96 GF NC reel Available :- • AN: 158 • CA: 104 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 12 Load request(Exist Jobs) .Anode:10 .Cathode:18 Load request waiting for materials: Anode:77 Cathode:82 Thank you very much! June 24, 2025 at 8:11 AM, Ngoc zia : Nc an 3.1 #agv5 error June 24, 2025 at 8:11 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is RTV Run Time over error and it has blocked reels delivery. Please check the issue on priority. Thank you very much! June 24, 2025 at 8:15 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP carriers. C1STKA71 (0102301) C1STKA72 (0205501, 0105904, 0205706) June 24, 2025 at 8:19 AM, Sazzad Bhai SKon : @FA All of the magazines of this plate is duplicated. So please confirm them: MLC6034 (C1STKC71, 0200403) : MC6193, 1313, 6566, 1237, 4481, 1226 June 24, 2025 at 8:26 AM, Ngoc zia : Nc An 4.1 #agv3 error June 24, 2025 at 8:29 AM, Dariimaa/다리마/Ivancsa : @Nandia FA pls check June 24, 2025 at 8:31 AM, Novák Károly F. A. : Solved June 24, 2025 at 8:31 AM, Mohammad Amir : Thank you very much! June 24, 2025 at 8:34 AM, Sazzad Bhai SKon : @FA MLC1003 has been UNKDUP. Please confirm from the manual port. C1STKC72 (0205905) June 24, 2025 at 8:37 AM, Zsolt F.A. : @mcs LTA1706 was removed due to faulty frame from E0CNVA52_M04 June 24, 2025 at 8:38 AM, Mohammad Amir : Good morning, Information has been updated in MCS and RTD database ✅. Thank you very much! June 24, 2025 at 8:57 AM, 카스텔 발라지 F.A. invited Győri József F.A. June 24, 2025 at 9:48 AM, Dániel Hufnágel : @Mohammad Amir MLA4230 removed from A72! 1 magazine(MA4343), fell on the ground! June 24, 2025 at 10:44 AM, Elena SL : @FA @Dániel Hufnágel hello. Please check AN AGV station L4 ST 17. does not work. empty magazines do not leave. button does not respond. thanks. June 24, 2025 at 10:45 AM, Mohammad Amir : Hello, Are you referring to Line -4-17 P02? Thank you very much! June 24, 2025 at 10:47 AM, Elena SL : I think yes. Thank you June 24, 2025 at 10:47 AM, Mohammad Amir : Please confirm me the carrier located at this Port physically. Thank you very much! June 24, 2025 at 10:48 AM, Mohammad Amir : Is it MLA6118? Please confirm. Thank you very much! June 24, 2025 at 10:50 AM, Elena SL : I confirm. June 24, 2025 at 10:51 AM, Elena SL : when turned on, the unload button is turned on together with Load … June 24, 2025 at 10:52 AM, Mohammad Amir : @FA Please check according to operations that MLA6118 exists at Line-4-17_P02 however in our database it is also located at C1VDA050_P02. It is suspected to be duplicated. Please check and confirm us. Thank you very much! June 24, 2025 at 10:53 AM, Mohammad Amir : I am working to solve the issue. Thank you very much! June 24, 2025 at 10:55 AM, Elena SL : @Mohammad Amir thank you very much! June 24, 2025 at 10:56 AM, Mohammad Amir : You are welcome! June 24, 2025 at 10:56 AM, Mohammad Amir : @카스텔 발라지 F.A. Could you please check this issue. Thank you very much! June 24, 2025 at 11:01 AM, Nguyen Huy : @FA @MCS Please send AGV to take out materials from chamber 6-5 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 24, 2025 at 11:04 AM, Mohammad Amir : Sure,I am working on it. June 24, 2025 at 11:07 AM, Mohammad Amir : Jobs have been created successfully to tranfer materials from VD CA 6-5 chamber to post VD STK. ✅. AGV#8 & #1 has been successfully assigned. Thank you very much! June 24, 2025 at 11:14 AM, Dániel Hufnágel : Chamber is empty June 24, 2025 at 11:14 AM, Mohammad Amir : You mean C1VDA050_P02 is empty ? Thank you very much! June 24, 2025 at 11:28 AM, Zulaa/졸라/Ivancsa FA : @MCS GF VD AN 1/3 chamber is empty, so please delete the AGV#07 job. June 24, 2025 at 11:29 AM, Mohammad Amir : @Elena SL I have resolved the issue please press UR again for 4-17_P02 Stacking. Thank you very much! June 24, 2025 at 11:29 AM, Mohammad Amir : Sure! June 24, 2025 at 11:30 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 24, 2025 at 11:31 AM, 김희래 : @Mohammad Amir Please check next lot quantity. June 24, 2025 at 11:31 AM, Mohammad Amir : Sure Sir Checking! June 24, 2025 at 11:32 AM, Mohammad Amir : Hello, This issue has resolved ✅. Now AGV#2 has been assigned to remove the empty magazine successfully. Thank you very much! June 24, 2025 at 11:33 AM, Elena SL : super! everything works. thanks for your help! June 24, 2025 at 11:34 AM, Mohammad Amir : Dear @김희래 Sir, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 14 • Cathode:93 GF NC reel Available :- • AN: 194 • CA: 120 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 04 Load request(Exist Jobs) .Anode:20 .Cathode:04 Load request waiting for materials: Anode:72 Cathode:76 Thank you very much! June 24, 2025 at 11:34 AM, Zulaa/졸라/Ivancsa FA : @MCS GF NC AN port is full , so please delete the agv#04 job. June 24, 2025 at 11:34 AM, Mohammad Amir : You are welcome! Feel free to contact me again if you need further assistance. June 24, 2025 at 11:34 AM, Mohammad Amir : Sure , Checking! June 24, 2025 at 11:37 AM, Mohammad Amir : Job has been cancelled successfully ✅. I have sent the magazine back to warehouse as well so that this AGV #4 can be free and use in production. Thank you very much! June 24, 2025 at 11:37 AM, Tuya Ivancsa FA : @Mohammad Amir VD AN chamber 1-3 p03 empty. Pls delete job AGV7. June 24, 2025 at 11:38 AM, Mohammad Amir : Sure Checking June 24, 2025 at 11:40 AM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you very much! June 24, 2025 at 11:41 AM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#06 in VD AN. Thank you. June 24, 2025 at 11:42 AM, Mohammad Amir : Sure, Checking June 24, 2025 at 11:44 AM, Mohammad Amir : I have resolved the issue ✅. Please set the AGV #6 in auto mode ,it will start to move. Thank you very much! June 24, 2025 at 11:55 AM, Mohammad Amir : @Manufacturing Please check and confirm is there any carrier physically located at VD AN 1-3 P01? Thank you very much! June 24, 2025 at 11:57 AM, Zulaa/졸라/Ivancsa FA : Korean technicians are now checking. After start auto mode. June 24, 2025 at 11:57 AM, Mohammad Amir : Thank you very much for the information. I am monitoring this AGV. June 24, 2025 at 11:58 AM, 배병민 (Bae Byoungmin) : Now start AGV#6 June 24, 2025 at 12:00 PM, Mohammad Amir : For your information:- AGV #6 VD AN has now started to move and it will deliver the UNKNOWN carrier located on it to the warehouse ✅. Thank you very much! June 24, 2025 at 12:00 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA June 24, 2025 at 12:02 PM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#08 in NC AN idle. Thank you. June 24, 2025 at 12:03 PM, Mohammad Amir : Sure, Checking! June 24, 2025 at 12:04 PM, Nguyen Huy : @FA AGV #10 error near NC AN Robot #3, pls check June 24, 2025 at 12:05 PM, Mohammad Amir : Issue has been resolved successfully ✅. Now NC AN AGV#8 has started to move. I am monitoring. Thank you very much! June 24, 2025 at 12:23 PM, Ivan Kasian Sl 5L 🥹 : @fa please check agv#1 line 5.5 Stacking Thank you so much June 24, 2025 at 1:17 PM, 김지수PM(Gyuri)_FA : @fa please check VC09 in GF CA VD June 24, 2025 at 1:17 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot June 24, 2025 at 1:18 PM, 김지수PM(Gyuri)_FA : According to MCS, destination is 5-5chamber, but in ACS destination is 2-5chamber > has to delete job in ACS June 24, 2025 at 1:23 PM, Sazzad Bhai SKon : GF Next lot quantity available Pre STK > Notching • Anode: 13 • Cathode: 01 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 11 • Cathode: 86 GF NC reel Available :- • AN: 171 • CA: 222 June 24, 2025 at 1:26 PM, Mohammad Amir : This message was deleted. June 24, 2025 at 1:29 PM, Mohammad Amir : Corrected*** Dear @KIM SEYEON [김세연]_FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 00 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 18 • Cathode:84 GF NC reel Available :- • AN: 185 • CA: 123 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 08 Load request(Exist Jobs) .Anode:06 .Cathode:12 Load request waiting for materials: Anode:72 Cathode:87 Thank you very much! June 24, 2025 at 1:29 PM, 김동섭 : GF AN 1-4 좌측상단 플레이트 안착불량 입니다 AGV 로 재안착 부탁드립니다 June 24, 2025 at 1:30 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA pls check. June 24, 2025 at 1:30 PM, 김동섭 : VD AN 1-4 입니다 June 24, 2025 at 1:32 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD CA AGV#5 idle. Please check. Thank you! June 24, 2025 at 1:32 PM, Mohammad Amir : Sure Checking! June 24, 2025 at 1:33 PM, Mohammad Amir : Issue has been resolved ✅. AGV#5 has started to move. Thank you very much! June 24, 2025 at 1:34 PM, 김지수PM(Gyuri)_FA : I created the job to release the carrier(1-4 P01), please arrange the position of carrier and let me know, I will put it back to p01, thanks June 24, 2025 at 1:43 PM, Dariimaa/다리마/Ivancsa : Done June 24, 2025 at 1:43 PM, 김지수PM(Gyuri)_FA : Okey I will put it back to P01 June 24, 2025 at 1:51 PM, 김동섭 : GF AN VD1-4 좌측상단 플레이트 안착불량 재발생 했습니다 June 24, 2025 at 1:54 PM, 김지수PM(Gyuri)_FA : @Dariimaa/다리마/Ivancsa problem occurred again, I gonna release both of carriers from the P01 P02, and then please arrange the position of carrier. Thanks! June 24, 2025 at 2:12 PM, Mohammad Amir : @FA Please check and confirm is there any maintenance on C1STKA71 ? There is shortages of Empty magazine for Anode NC. Thank you very much! June 24, 2025 at 2:12 PM, Dániel Hufnágel : Yes, SMC working there June 24, 2025 at 2:13 PM, Mohammad Amir : Thank you very much for confirming! June 24, 2025 at 2:24 PM, Mohammad Amir : @FA Please check C1STKA72(Input Ports P07~P13 except P09/P10) all are OOS. Several jobs are pending. Please check! Thank you very much! June 24, 2025 at 2:28 PM, Dariimaa/다리마/Ivancsa : Korean workers are working. June 24, 2025 at 2:30 PM, Mohammad Amir : Thank you very much for informing me. June 24, 2025 at 2:37 PM, 은향(OH EUN HYANG) : This message was deleted. June 24, 2025 at 2:37 PM, 은향(OH EUN HYANG) : 헝가리 테크니션 GF AN NC June 24, 2025 at 2:38 PM, 은향(OH EUN HYANG) : This message was deleted. June 24, 2025 at 2:38 PM, 은향(OH EUN HYANG) : This message was deleted. June 24, 2025 at 2:38 PM, 은향(OH EUN HYANG) : Can you come? June 24, 2025 at 2:43 PM, Zulaa/졸라/Ivancsa FA : @MCS GF VD CA 1/7 chamber is closed, so please delete the AGV s job. June 24, 2025 at 2:45 PM, Mohammad Amir : ✅ June 24, 2025 at 2:46 PM, Mohammad Amir : @FA Please check C1STKC71_P21 run time error materials recovery stopped. Thank you very much! June 24, 2025 at 2:47 PM, Mohammad Amir : @FA Please check E0CNVC52 _RTV01 it is OOS and reels delivery has stopped. Thank you very much! June 24, 2025 at 2:51 PM, Mohammad Amir : @FA Please check E0CNVA52_07_54 there is Data Loss error and it is blocking An reels delivery. Thank you very much N June 24, 2025 at 2:54 PM, 김희래 : @FA Please check AN Robot#1,3. Agvs are still waiting. June 24, 2025 at 3:00 PM, 안진모 An Jin Mo : Good afternoon. Would it be okay if I use the GF anode manual port? I’d like to check the lot numbers of the NG reels stored in warehouses 51 and 52. One reel has already been ejected from storage, but if there’s no issue with it, I’m planning to put it back in.” June 24, 2025 at 3:00 PM, 김희래 : @카스텔 발라지 F.A. C0PVA030_P11 is paused. Please check. Thank you. June 24, 2025 at 3:01 PM, Novák Károly F. A. : Checking June 24, 2025 at 3:03 PM, Novák Károly F. A. : Solved June 24, 2025 at 3:04 PM, 김동섭 : GF AN VD 5-5 우측하단 플레이트 안착 불량 입니다. AGV 재안착 부탁드립니다. June 24, 2025 at 3:07 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:98 GF NC reel Available :- • AN: 158 • CA: 108 ///////////////////////////////////////// VD Unload request .Anode: 40 .Cathode: 02 Load request(Exist Jobs) .Anode:24 .Cathode:10 Load request waiting for materials: Anode:57 Cathode:71 Thank you very much! June 24, 2025 at 3:11 PM, 김지수PM(Gyuri)_FA : @fa please check AGVs in AN VD, 8 agvs stopped June 24, 2025 at 3:14 PM, 안진모 An Jin Mo : @MCS Please send these trays to the manual port E0STKA51_M9 and M10. LTA0916 LTA0710 June 24, 2025 at 3:15 PM, Mohammad Amir : @FA Please make E0CNVC52_09_054 TO auto mode currently it is manual ,it will block reels delivery. Thank you very much! June 24, 2025 at 3:15 PM, Mohammad Amir : Sure, working on it. June 24, 2025 at 3:17 PM, Mohammad Amir : Jobs have been created successfully ✅. Please collect it from M09/10. Thank you! June 24, 2025 at 3:21 PM, Mohammad Amir : @FA Please check E0STKC51_C01 there is MCP Auto Manual mode error. Thank you! June 24, 2025 at 3:25 PM, 안진모 An Jin Mo : @mcs Since I’m going to check all the NG reels, can I send them to the same port via RTD June 24, 2025 at 3:25 PM, 안진모 An Jin Mo : ?? June 24, 2025 at 3:26 PM, Mohammad Amir : Yes ,you can . Please,let me know if you need any assistance. Thank you very much! June 24, 2025 at 3:27 PM, 카스텔 발라지 F.A. : Solved, the crane was frozen June 24, 2025 at 3:27 PM, Mohammad Amir : Thank you very much! June 24, 2025 at 3:30 PM, Mohammad Amir : @카스텔 발라지 F.A. Please check MLA4230 currently located at C1STKA72_P10 it is not moving for some time and several AGVs are waiting to complete the task. Thank you very much! June 24, 2025 at 3:39 PM, Mohammad Amir : @FA Please check NC Robot #2 AN (5007) there is Robot magazine detect sensor error. Thank you very much! June 24, 2025 at 3:39 PM, Mohammad Amir : C0PVA020_P13* June 24, 2025 at 3:45 PM, 카스텔 발라지 F.A. : Solved June 24, 2025 at 3:45 PM, 카스텔 발라지 F.A. : Solved June 24, 2025 at 3:45 PM, Mohammad Amir : Thank you very much 🙏 June 24, 2025 at 3:52 PM, 배병민 (Bae Byoungmin) : @최정한.KOVA GF 음극 VD 2-2로 UR명령을 받고 AGV#6 반송하러 갔는데 VD설비 도어가 닫혀있습니다. 확인 가능하실까요? June 24, 2025 at 3:53 PM, Mohammad Amir : @Manufacturing Please check VD AN 5-3 P03 ,what is the actual carrier there ? Also confirm what is the actual carrier on 6-9 VD AN P03? Thank you very much! June 24, 2025 at 3:56 PM, 김동섭 : 안녕하세요. 한국진공 김동섭 부장 입니다 작업자가 작업자모드로 장비가동 시켰습니다. June 24, 2025 at 4:02 PM, 김동섭 : AN VD5-3 P3 MLA6078 AN VD 6-9 P3 MLA6076 June 24, 2025 at 4:02 PM, Mohammad Amir : Thank you very much! June 24, 2025 at 4:03 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD AN 2-2 chamber is closed, so please delete the AGV job. June 24, 2025 at 4:04 PM, Mohammad Amir : Job has been cancelled successfully ✅. Thank you! June 24, 2025 at 4:06 PM, Mohammad Amir : This message was deleted. June 24, 2025 at 4:07 PM, Mohammad Amir : All the information are now updated in MCS and RTD database. Thank you! June 24, 2025 at 4:09 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA51_C01/C02 these cranes are inactive without error since 15:32. Please make it active from SCS side , several jobs are pending and reels delivery has completely stopped because of this issue. Thank you very much! June 24, 2025 at 4:09 PM, 카스텔 발라지 F.A. : Solved. the crane was frozen June 24, 2025 at 4:10 PM, Mohammad Amir : Thank you very much! June 24, 2025 at 4:12 PM, 김동섭 : GF AN VD 1-5 호기 우측상단 플레이트 안착불량 발생 했습니다. AGV 로 재안착 부탁드립니다 June 24, 2025 at 4:13 PM, 김동섭 : 좌측 입니다 June 24, 2025 at 4:13 PM, 카스텔 발라지 F.A. : There was an order for 6057 to take the material, but it wasn't executed (the crane was in a "moving" state, but it wasn’t actually moving). I deleted the order, and the crane started the next task. In the meantime, the system regenerated the order I had deleted. Now everything seems to be fine. June 24, 2025 at 4:14 PM, Mohammad Amir : Thank you very much 🙏 June 24, 2025 at 4:14 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check. June 24, 2025 at 4:33 PM, Lika : Hello,line 6#2 does not bring cathode material for a long time June 24, 2025 at 4:33 PM, Mohammad Amir : Are you referring to Stacking? June 24, 2025 at 4:34 PM, Lika : Sorry,yes June 24, 2025 at 4:34 PM, Mohammad Amir : Checking June 24, 2025 at 4:37 PM, Mohammad Amir : I think you are referring to Anode materials? Cause currently there is already a cathode materials MLC4233 available at 6-2 _P02 , stacking. Thank you very much! June 24, 2025 at 4:38 PM, Lika : 6#1 the operator made a mistake June 24, 2025 at 4:39 PM, Mohammad Amir : For 6-1 , Issue has been resolved ✅. Cathode materials on the with AGV#5. ✅ Thank you very much! June 24, 2025 at 4:39 PM, Mohammad Amir : There's one issue with Anode materials. Please confirm me which material actually exists at 6-2 _P01? Thank you very much! June 24, 2025 at 4:40 PM, Lika : Thank you so much 🙏 June 24, 2025 at 4:40 PM, Mohammad Amir : You are welcome! June 24, 2025 at 4:41 PM, Mohammad Amir : @Lika Please check this issue ,I noticed full magazine is not being transferred to AGV from Andoe 6-2 because of the issue. Please provide me this information. Thank you very much! June 24, 2025 at 4:41 PM, Lika : does not take anode magazines 6#2,yes June 24, 2025 at 4:42 PM, Lika : the operator got everything mixed up, I apologize June 24, 2025 at 4:42 PM, Mohammad Amir : Yes ,there is an issue ,it will not take,I need to solve. Please help me with the information i requested earlier. I am working on it. June 24, 2025 at 4:47 PM, 김동섭 : GF AN VD 1-5 호기 좌측상단 플레이트 안착불량 발생 했습니다. AGV 로 재안착 부탁드립니다 June 24, 2025 at 4:56 PM, 배병민 (Bae Byoungmin) : @카스텔 발라지 F.A. Please re-discharge them to the AGV by manual return, sort them, and re-introduce them to the VD. June 24, 2025 at 4:57 PM, 배병민 (Bae Byoungmin) : GF AN VD 1-5 plate misalignment. June 24, 2025 at 5:01 PM, 김지수PM(Gyuri)_FA : 몇번 포트인지 알 수 있을까요? June 24, 2025 at 5:02 PM, 배병민 (Bae Byoungmin) : 해결됬습니다 방금 June 24, 2025 at 5:04 PM, Ngoc zia : @rtd can u check C1STKA71 pls. 58 full mgz. Many mgz new production on today still on storage. But if i check on rtd didn’t find these mgz on STKA71 ex MLA4203, MLA4084 June 24, 2025 at 5:09 PM, 김지수PM(Gyuri)_FA : This message was deleted. June 24, 2025 at 5:13 PM, Mohammad Amir : Hello, Currently there are 58 magazine but after getting filtered it is just 1 which can be transffered to VD. Please reconcile the STKA71 it will solve the issue. Thank you very much! June 24, 2025 at 5:15 PM, Ngoc zia : Thank you your information! June 24, 2025 at 5:16 PM, Lika : Line 4 #6 NGV Alarm June 24, 2025 at 5:16 PM, Mohammad Amir : Additionaly, The reason is the carrier state should be stored or installed but it is in completed state in MCS and RTD ,that's why it is getting filtered by RTD. Please reconcile the STK. June 24, 2025 at 5:17 PM, Mohammad Amir : You are welcome! June 24, 2025 at 5:20 PM, 이도형 (Lee) : @FA NC An #3 Robot is stopped. Please check. June 24, 2025 at 5:28 PM, Zsolt F.A. : @mcs Please delete tray MAL6081 from production. It was taken out because of a bent handle. June 24, 2025 at 5:28 PM, Zsolt F.A. : Sorry MLA6081 June 24, 2025 at 5:29 PM, Mohammad Amir : @Lika @manufacturing. Please this issue still exists,give me this information. Thank you very much! June 24, 2025 at 5:29 PM, Mohammad Amir : ✅. Thank you! June 24, 2025 at 5:32 PM, Lika : does not take anode magazines 6#2 MLA0030 June 24, 2025 at 5:35 PM, Mohammad Amir : Please confirm, In ACS i See it is MLA3251. Are you it is MLA0030(C6STM020-P01)? Thank you very much! June 24, 2025 at 5:36 PM, Dániel Hufnágel : Please share which line, machine and port correctly. Thank you June 24, 2025 at 5:39 PM, Sazzad Bhai SKon : @FA please check the inbound ports of post VD STK AN. C1STKA72_P07/P08, P13, P14. These are showing in-service but actually not June 24, 2025 at 5:45 PM, Ivan Chobitko : Port empty But ST line 6 machine 2 AN plate AGV didn’t take plate with empty MGZ Here on the AGV station plate MLA0030 June 24, 2025 at 5:46 PM, Mohammad Amir : Thank you very much for the confirmation! June 24, 2025 at 5:58 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share availability lot June 24, 2025 at 6:02 PM, Hữu Thắng : @FA NC CA AGV#8 error . Plz check . thanks June 24, 2025 at 6:09 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 13 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 1 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Simon Attila Viczai Tamás Pálosi Róbert ———————————— Assembly 1F(3) Fabricius Gergő Gégény Dávid Nagy Tamás ———————————— Assembly GF(3) Csuti Zoltán Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 24, 2025 at 6:10 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 18 • Cathode: 07 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:67 GF NC reel Available :- • AN: 177 • CA: 114 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 20 Load request(Exist Jobs) .Anode:50 .Cathode:02 Load request waiting for materials: Anode:65 Cathode:59 June 24, 2025 at 6:31 PM, Hữu Thắng : @FA GF NC CA RTV STP-01 UP Cynlinder Errror . Can you plz check it June 24, 2025 at 6:32 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs please check June 24, 2025 at 6:34 PM, VK (mcs) : @FA Please check Anode reel STKA51 There is no error but cranes are stopped. June 24, 2025 at 6:36 PM, KIM SEYEON [김세연]_FA : @Csuti Zoltán F.A @Kertész Dániel please check June 24, 2025 at 6:37 PM, 김지수PM(Gyuri)_FA : This message was deleted. June 24, 2025 at 6:40 PM, 김지수PM(Gyuri)_FA : I deleted the job and gonna make it again now it is working June 24, 2025 at 6:43 PM, 김지수PM(Gyuri)_FA : Vk could you please raise the priority for 7043track (EoSTKA51) until there will be no empty reel trays from the E0CNVA52 June 24, 2025 at 6:44 PM, VK (mcs) : Checking June 24, 2025 at 6:47 PM, VK (mcs) : Done June 24, 2025 at 6:48 PM, 김지수PM(Gyuri)_FA : Have to do it 9 times more 🤣 thanks in advance June 24, 2025 at 6:49 PM, VK (mcs) : Priority changed in RTD June 24, 2025 at 6:52 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 3plates out from the M04(C1CNV072) June 24, 2025 at 6:55 PM, Hữu Thắng : @FA NC CA AGV#6 stopped . Can u please check it . thanks June 24, 2025 at 7:11 PM, QuangPhan : Hello! @VK (mcs) VD AN 2-3 #12 UR half chamber. please check. thanks June 24, 2025 at 7:12 PM, QuangPhan : This message was deleted. June 24, 2025 at 7:13 PM, QuangPhan : This message was deleted. June 24, 2025 at 7:13 PM, QuangPhan : More VD AN 2-6 #15 LR half chamber. please check. thanks June 24, 2025 at 7:14 PM, VK (mcs) : UR received but reply is carrier ID is null, please adjust carrier ID and then apply UR. June 24, 2025 at 7:16 PM, VK (mcs) : Please confirm carrier IDs in the ports. Thx June 24, 2025 at 7:22 PM, QuangPhan : Hello! @VK (mcs) VD AN 6-8 #53 chamber LR P01, P02, P04 full and PO3 empty. please check. thanks June 24, 2025 at 7:28 PM, VK (mcs) : MLA2087 job cancelled Please send back carrier in port 4 to STK and apply again LR for ports 3 and 4 June 24, 2025 at 7:30 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20(6010) It seems has an issue, carriers are not transferred to that port. June 24, 2025 at 7:33 PM, QuangPhan : Hello! Dear FA, Please send mgz PO4 ( right) to warehouse A72. Thanks June 24, 2025 at 7:36 PM, Lajos Gábor F.A. : Done June 24, 2025 at 7:39 PM, Hữu Thắng : @MCS Can you please check those chamber in VD AN ( half chamber ) 2/3 2/6 3/3 5/2 4/7 4/9 June 24, 2025 at 7:41 PM, Hữu Thắng : MLA6234 MLA1149 June 24, 2025 at 7:41 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir ) please share availability lot June 24, 2025 at 7:41 PM, 김지수PM(Gyuri)_FA : 5-2 will be received the carriers from VC06 June 24, 2025 at 7:42 PM, 김지수PM(Gyuri)_FA : 4-9 4-7 also June 24, 2025 at 7:43 PM, VK (mcs) : 2/3 Carrier id is null, please adjust ID and apply UR again. 2/6 Please confirm current carriers in the machine. 3/3 5/2 4/7 4/9 Carriers are on the way. June 24, 2025 at 7:47 PM, VK (mcs) : It seems carriers transferred manually and information was remained in RTD for port 4. RTD cleared and material will transfer when they are available. June 24, 2025 at 7:50 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 29 • Cathode: 01 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:87 GF NC reel Available :- • AN: 165 • CA: 99 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 00 Load request(Exist Jobs) .Anode:20 .Cathode:04 Load request waiting for materials: Anode:54 Cathode:75 June 24, 2025 at 7:51 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please send empty magazine plate at C1STKA71 to C1STKA71_M01 Port - Quantity : 10 plate June 24, 2025 at 7:55 PM, VK (mcs) : Empty MGZ plate has been released. June 24, 2025 at 8:06 PM, 김지수PM(Gyuri)_FA : @fa Please check e0stkc51 >oversize June 24, 2025 at 8:08 PM, Yaroslav SL/C 6 line : Hello everyone @fa please check Anode station near machine ST 6/4, button UR doesn’t work. Thanks June 24, 2025 at 8:15 PM, Lajos Gábor F.A. : Done June 24, 2025 at 8:17 PM, KIM SEYEON [김세연]_FA : @Lajos Gábor F.A. @Csuti Zoltán F.A could you please check ST 6/4 UR button? June 24, 2025 at 8:30 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ ease check VF NC AN AGV 7 June 24, 2025 at 8:31 PM, KIM SEYEON [김세연]_FA : solved June 24, 2025 at 8:38 PM, Lajos Gábor F.A. : @MCS Could you check C6STM020_P01, Phisically the plate is MLA0030 ,but in acs plate id is MLA3251 June 24, 2025 at 8:38 PM, VK (mcs) : Checking June 24, 2025 at 8:39 PM, Hữu Thắng : Sorry for reply late 2/6 / MLA6234 P01 -MLA1149 P02 inside the chamber . As i checked chamber still half . Can you recheck please June 24, 2025 at 8:41 PM, VK (mcs) : Previous LR was failed because of manual transfer New LR received at 20:29 and material will deliver when they are available. June 24, 2025 at 8:42 PM, Hữu Thắng : Thank you June 24, 2025 at 8:44 PM, KIM SEYEON [김세연]_FA : @Amir(MCS) ) @VK (mcs) please share availability lot June 24, 2025 at 8:48 PM, VK (mcs) : Both carriers location in MCS is NA Last information of MLA3251 is carrier data removed in C1CNV072(16048) MLA0030 carrier transferred by AGV 2 to the C1CNV072_P01 and then data removed. June 24, 2025 at 8:49 PM, Kertész Dániel : Okay, then what we have to do with this? June 24, 2025 at 8:50 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 36 • Cathode: 09 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 00 • Cathode:79 GF NC reel Available :- • AN: 147 • CA: 83 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 00 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:38 Cathode:80 June 24, 2025 at 8:51 PM, VK (mcs) : Please transfer it manually June 24, 2025 at 8:53 PM, KIM SEYEON [김세연]_FA : @VK (mcs) please send empty magazine plate at C1STKA71 to C1STKA71_M01 Port - Quantity : 10 plate June 24, 2025 at 9:00 PM, VK (mcs) : Empty MGZ plate has been released. June 24, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : @Kertész Dániel please help me at VD AN STACKER CRANE June 24, 2025 at 9:09 PM, 김지수PM(Gyuri)_FA : @fa please check VC05 > NC AN June 24, 2025 at 9:10 PM, QuangPhan : Hello! @VK (mcs) Could you please check NC AN 2/2 AGV does not perform full mgz pickup. The number of full mgz is overloaded. long time Thank you so much! June 24, 2025 at 9:13 PM, VK (mcs) : AGVs are busy, job assigned already and it’s waiting June 24, 2025 at 9:31 PM, KIM SEYEON [김세연]_FA : @Farkas Tamàs could you please check GF NC AN AGV 9 It has continue to sensing something. Could check and if it is not fixed, make it line out. June 24, 2025 at 9:31 PM, KIM SEYEON [김세연]_FA : @Kertész Dániel @Lajos Gábor F.A. June 24, 2025 at 9:32 PM, Farkas Tamàs : Ok June 24, 2025 at 9:35 PM, Hữu Thắng : Still half chamber . is there any problem with the machine . Can you check it plz June 24, 2025 at 9:35 PM, Kertész Dániel : Done June 24, 2025 at 9:37 PM, Yaroslav SL/C 6 line : @mcs please share available lot, thanks June 24, 2025 at 9:37 PM, KIM SEYEON [김세연]_FA : line out? June 24, 2025 at 9:38 PM, Hữu Thắng : @MCS VD AN 6-8 there are 3 plates . Can you please transfer MLA4203 to KA72 please . Thank you June 24, 2025 at 9:38 PM, VK (mcs) : Material is transferring base on LR priority. Whenever RTD receives new request, then machine goes to the end of queue. As I see after 20:29, we received again LR at 21:00. Please do not request. There is LR for other machines before than 6/2. Thx June 24, 2025 at 9:39 PM, Kertész Dániel : This message was deleted. June 24, 2025 at 9:39 PM, Kertész Dániel : No, just one sensor had an error and I solved it. June 24, 2025 at 9:40 PM, VK (mcs) : Transport command created. June 24, 2025 at 9:44 PM, Hữu Thắng : VD AN Chamber 1/3 has an error . Can you please transfer those carrier to KA72 . Thanks June 24, 2025 at 9:45 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 3plates out from the M01(C1CNV072) June 24, 2025 at 9:45 PM, Hữu Thắng : VD CA Line 5/1 ~ 6/4 only 2 plate for a long time . Can you check it . Thanks June 24, 2025 at 9:48 PM, KIM SEYEON [김세연]_FA : 😊 June 24, 2025 at 9:49 PM, 김지수PM(Gyuri)_FA : Job was created from the mcs at 9:44pm June 24, 2025 at 9:49 PM, 연해리 : @VK (mcs) please send empty magazine plate at C1STKA71 to C1STKA71_M01 Port - Quantity : 10 plate June 24, 2025 at 9:54 PM, VK (mcs) : Empty MGZ has been released. June 24, 2025 at 10:13 PM, 연해리 invited Tasnim / Ivancsa FA and Faisal / Ivancsa FA. June 24, 2025 at 10:14 PM, KIM SEYEON [김세연]_FA : @Amir(MCS) ) @VK (mcs) s) please share availability lot June 24, 2025 at 10:17 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 05 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:78 GF NC reel Available :- • AN: 157 • CA: 100 ///////////////////////////////////////// VD Unload request .Anode: 26 .Cathode: 03 Load request(Exist Jobs) .Anode:10 .Cathode:12 Load request waiting for materials: Anode:30 Cathode:80 June 24, 2025 at 10:25 PM, 김지수PM(Gyuri)_FA : @Kertész Dániel Daniel, could you please check the VC08 in VD CA > Align send limit was occurred so many times June 24, 2025 at 10:32 PM, Kertész Dániel : My colleague is checking it June 24, 2025 at 10:33 PM, 김지수PM(Gyuri)_FA : Perfect, thanks! June 24, 2025 at 10:34 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 5plates out from the M01(C1CNV072) June 24, 2025 at 10:50 PM, 김지수PM(Gyuri)_FA : @fa please check e0stka52 June 24, 2025 at 10:51 PM, Yaroslav SL/C 6 line invited Denys Hlobin, Yana Nechet, Anton and Yana Ushkalo. June 24, 2025 at 10:56 PM, Hữu Thắng : @MCS Can you please check LR 6-8 . Thanks June 24, 2025 at 10:57 PM, Hữu Thắng : VD AN June 24, 2025 at 10:58 PM, Lajos Gábor F.A. : Doing June 24, 2025 at 10:58 PM, VK (mcs) : LR received at 22:56 June 24, 2025 at 10:58 PM, 김지수PM(Gyuri)_FA : @fa Please check the C1CNV072_P04 Carrier information is not exist but cargo is detected, because of this carrier MLA6197 and MLA6155 are still transferring to P04 over 3.5hours. Thanks! June 24, 2025 at 11:01 PM, 김지수PM(Gyuri)_FA : I can check UNK25062417452424 is located on that port but this one is not exist in carrier list, have to release manually and put it back to in-port of CNV June 24, 2025 at 11:06 PM, VK (mcs) : Please confirm carrier IDs in anode VD 6/3 June 24, 2025 at 11:08 PM, Hữu Thắng : Sure 1’ June 24, 2025 at 11:08 PM, VK (mcs) : Also please adjust carrier IDs in anode VD 2/3 and apply again unload request.thx June 24, 2025 at 11:09 PM, VK (mcs) : @FA Can you please tell me actual carrier ID in the port 4. Thx June 24, 2025 at 11:12 PM, Lajos Gábor F.A. : MLA3251 June 24, 2025 at 11:12 PM, Hữu Thắng : MLA6079-MLA6112-MLA4110-MLA4221 June 24, 2025 at 11:13 PM, VK (mcs) : Thanks for confirmation June 24, 2025 at 11:15 PM, VK (mcs) : @FA @manufacturing There is location mismatch for MLA6079 Please rack it out/in from C1STKA72 shelf(0103001) thx June 24, 2025 at 11:17 PM, Lajos Gábor F.A. : Could you change the id? June 24, 2025 at 11:19 PM, Hữu Thắng : i can’t deal with this . Can you please waiting . Thanks June 24, 2025 at 11:19 PM, VK (mcs) : Thank you, I transferred it back to port 2, It will transfer to manual port in case if carrier id recognises as UNK. June 24, 2025 at 11:20 PM, VK (mcs) : It’s better to check by person. Already transferred to another ports. Manufacturing team will check it. Thx June 24, 2025 at 11:20 PM, Hữu Thắng : @FA C1CNV071-CVP2-MCP#2 : auto step timeover error . June 24, 2025 at 11:23 PM, VK (mcs) : No need anymore. Thx June 24, 2025 at 11:29 PM, VK (mcs) : @김지수PM(Gyuri)_FA There is mismatch location for MLA6079 According to operation’s It’s located in anode VD 6/3 port 1 According to MCS it’s located in stacking C1STM020_P01 Thx June 24, 2025 at 11:37 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 7plates out from the M01(C1CNV072) June 24, 2025 at 11:51 PM, Hữu Thắng : The chamber has an error . The barcode are missing information . We couldn’t adjust it . @FA Can you please send these magazines to KA72 please . Thanks June 25, 2025 at 12:10 AM June 25, 2025 at 12:10 AM, 오세민(ST) : ST 1Line AGV3 error Check please June 25, 2025 at 12:30 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:85 GF NC reel Available :- • AN: 163 • CA: 81 ///////////////////////////////////////// VD Unload request .Anode: 20 .Cathode: 04 Load request(Exist Jobs) .Anode:10 .Cathode:08 Load request waiting for materials: Anode:70 Cathode:72 June 25, 2025 at 12:37 AM, Hữu Thắng : @FA NC CA Robot#1 error . Can you please check it . thanks June 25, 2025 at 12:38 AM, 김지수PM(Gyuri)_FA : @VK (mcs) Could you please transfer the UNK carrier(25062424~) located in VC06 GF AN NC to MP02? June 25, 2025 at 12:40 AM, VK (mcs) : This message was deleted. June 25, 2025 at 12:40 AM, VK (mcs) : Checking June 25, 2025 at 1:06 AM, VK (mcs) : It's already transferred June 25, 2025 at 1:16 AM, 연해리 : @Faisal / Ivancsa FA @Tasnim / Ivancsa FA Two more empty mgz plates will be coming out of An Pre-VD Storage, so please move them to An Notching. June 25, 2025 at 1:20 AM, 김지수PM(Gyuri)_FA : This message was deleted. June 25, 2025 at 1:28 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKA51 C01 > empty release error June 25, 2025 at 1:44 AM, Hữu Thắng : @FA NC CA Robot#2 - 1 has an error . Could unplz check it . thanks June 25, 2025 at 1:46 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKA51 Carrier on 6056 and 6057 >have to check the real carrier id June 25, 2025 at 1:47 AM, 김지수PM(Gyuri)_FA : According to the rtd, LTA1646 is already racked in but in scs I can check the data is still remaining on that port June 25, 2025 at 1:48 AM, 김지수PM(Gyuri)_FA : Also 6057 > has to check the carrier ID and has to update the information June 25, 2025 at 2:07 AM, Hữu Thắng : Can you please share it again . June 25, 2025 at 2:10 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:83 GF NC reel Available :- • AN: 154 • CA: 102 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 08 Load request(Exist Jobs) .Anode:08 .Cathode:02 Load request waiting for materials: Anode:82 Cathode:68 June 25, 2025 at 2:14 AM, 이한웅(삼구) : Please UR check NC An 2-1 June 25, 2025 at 2:16 AM, VK (mcs) : There is no UR June 25, 2025 at 2:32 AM, 김지수PM(Gyuri)_FA : @fa could you please check the 6065 track of E0STKA51? June 25, 2025 at 2:34 AM, 김지수PM(Gyuri)_FA : Seem like manual status now June 25, 2025 at 2:40 AM, 김지수PM(Gyuri)_FA : @Farkas Tamàs need to check it 🥲 June 25, 2025 at 2:41 AM, Farkas Tamàs : Ok June 25, 2025 at 2:56 AM, Farkas Tamàs : Done June 25, 2025 at 2:58 AM, 이한웅(삼구) : @김지수PM(Gyuri)_FA PM님 GF An 노칭 2-1은 지금 몇시간째 풀 매거진 안가져가는데 확인 부탁드립니다. June 25, 2025 at 3:02 AM, 김지수PM(Gyuri)_FA : 넵 바로 확인하겠습니다. June 25, 2025 at 3:06 AM, 김지수PM(Gyuri)_FA : P01 우선순위 조정해서 VC10 가고있습니다. June 25, 2025 at 3:07 AM, 김지수PM(Gyuri)_FA : P01은 UR이 02:23분이고, P02는 UR이 안 올라왔습니당 June 25, 2025 at 3:14 AM, 이한웅(삼구) : 자동 UR인데 왜 UR 요청이 안되었을까요... 요 시간은 UR 없다고해서 인/아웃 포트 매뉴얼 변경 후 오토 모드로 재변경한 시간이네요 ㅠㅠ June 25, 2025 at 3:16 AM, 이한웅(삼구) : 풀매거진 배출이 계속 지연되고 있습니다... June 25, 2025 at 3:18 AM, 김지수PM(Gyuri)_FA : RTD상 P02기록 자체가 24일 오전부터 없네용ㅠㅠ June 25, 2025 at 3:19 AM, 김지수PM(Gyuri)_FA : ACS상 P02포트가 패시브 상태입니다 June 25, 2025 at 3:20 AM, 김지수PM(Gyuri)_FA : 방금 active 전환했고 UR이 올라왔습니다. June 25, 2025 at 3:24 AM, Yon Ko/연커/ : @MCS NC AN AGV#08 is idle with material check it. June 25, 2025 at 3:24 AM, 이한웅(삼구) : 풀매거진 배출 안되고 있는 설비 다수인데 확인 가능할까요..?? June 25, 2025 at 3:25 AM, 김지수PM(Gyuri)_FA : 우선순위 조정해서 UR시간 긴 포트부터 해소되도록 하겠습니다. June 25, 2025 at 3:26 AM, 이한웅(삼구) : 감사합니다. June 25, 2025 at 3:27 AM, VK (mcs) : Someone created a job June 25, 2025 at 3:30 AM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20 (6010) It seems there is an UNK carrier. June 25, 2025 at 3:43 AM, QuangPhan : Hello! @MCS VD AN 6-8 #53 AGV LR hafl chamber. Please check. Thanks June 25, 2025 at 3:47 AM, VK (mcs) : We received several times LR 22:56 00:09 00:39 1:16 1:46 2:17 3:38 When a new LR receives then machine goes to end of queue. Please do not request till material deliver. June 25, 2025 at 3:48 AM, QuangPhan : Thank you June 25, 2025 at 3:50 AM, 김지수PM(Gyuri)_FA : @fa could you please check the HS of 8065 track (e0stkc51) June 25, 2025 at 3:54 AM, VK (mcs) : @FA Please check this issue. VD is half June 25, 2025 at 3:57 AM, Yon Ko/연커/ : @MCS NC AN AGV#07 is idle with material. Check this thank u! June 25, 2025 at 3:58 AM, 김지수PM(Gyuri)_FA : @Kertész Dániel please check it, please check it, if there is no problem move it to next port June 25, 2025 at 4:03 AM, 김지수PM(Gyuri)_FA : @Farkas Tamàs according to rtd this carrier is on the 8066, but real carrier is located 8065 June 25, 2025 at 4:07 AM, 김지수PM(Gyuri)_FA : @fa please check c1stka71 P20 This carrier is blocking MLA2007 transportation June 25, 2025 at 4:16 AM, Kateryna SSL C : Hello! @VK (mcs) could you please update available lot for GF? Thank you! June 25, 2025 at 4:17 AM, 김지수PM(Gyuri)_FA : @manufacturing Please take 3plates out from the M01(C1CNV072) June 25, 2025 at 4:17 AM, Kertész Dániel : Done June 25, 2025 at 4:21 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 10 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 11 • Cathode:120 GF NC reel Available :- • AN: 186 • CA: 109 ///////////////////////////////////////// VD Unload request .Anode: 01 .Cathode: 08 Load request(Exist Jobs) .Anode:08 .Cathode:00 Load request waiting for materials: Anode:82 Cathode:100 June 25, 2025 at 4:21 AM, 연해리 : @Kertész Dániel Hello Daniel, Now we are training to install empty plate to the robot. June 25, 2025 at 4:22 AM, 연해리 : So we need to install the carrier ID to the plate. June 25, 2025 at 4:29 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa could you please remove the carrier on the C1STKA71_P20? June 25, 2025 at 4:29 AM, Kertész Dániel : I know this, at the start of shift I showed you this:D June 25, 2025 at 4:33 AM, Kertész Dániel : And I already showed this method to our operators. June 25, 2025 at 4:33 AM, 김지수PM(Gyuri)_FA : @Lajos Gábor F.A. June 25, 2025 at 4:35 AM, 이한웅(삼구) : @김지수PM(Gyuri)_FA PM님 GF 로봇 포트 공/풀 밸런스 깨져서 AGV 대부분이 풀 매거진 가지고 있는데. 로폿 포트에 공플레이트 투입 가능할까요..? June 25, 2025 at 4:38 AM, 연해리 : 넵 지금 계속 넣고있습니다 June 25, 2025 at 4:39 AM, 이한웅(삼구) : 감사합니다! June 25, 2025 at 4:44 AM, 연해리 : @Faisal / Ivancsa FA If the robot is stopped because it is running out of empty plates, please continue supplying them. Now, the robot in the center's plates are not enough. June 25, 2025 at 4:44 AM, Faisal / Ivancsa FA : ok June 25, 2025 at 5:09 AM, 김지수PM(Gyuri)_FA : @fa is there any problem in E0CNVA53? June 25, 2025 at 5:22 AM, 김지수PM(Gyuri)_FA : Check the cathode side too, put some plates on 1,3 robot (cathode side) June 25, 2025 at 5:25 AM, Faisal / Ivancsa FA : Okay June 25, 2025 at 5:29 AM, Faisal / Ivancsa FA : I couldn't find any Cathode empty plates June 25, 2025 at 5:30 AM, 원재 : @FA NC An #5 AGV keeps stopping. Please check. June 25, 2025 at 5:32 AM, Gégény Dávid : Done June 25, 2025 at 5:34 AM, 김지수PM(Gyuri)_FA : Okey then take care Anode side, thanks! June 25, 2025 at 5:35 AM, Faisal / Ivancsa FA : No problem June 25, 2025 at 5:35 AM, 연해리 : @Faisal / Ivancsa FA Could you supply the empty plates to the cathode sode also? June 25, 2025 at 5:36 AM, 연해리 : All the robots in cathode side need plate supplement. June 25, 2025 at 5:36 AM, Faisal / Ivancsa FA : There are no Cathode empty plates June 25, 2025 at 5:48 AM, Yaroslav SL/C 6 line : @fa AGV2 damaged the station on the ST 6/11, please check. Thanks June 25, 2025 at 5:53 AM, P.Bence A SSL : Check again please June 25, 2025 at 6:00 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 20 • Cathode: 07 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 16 • Cathode:121 GF NC reel Available :- • AN: 191 • CA: 109 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 00 Load request(Exist Jobs) .Anode:00 .Cathode:00 Load request waiting for materials: Anode:66 Cathode:120 Thank you very much! June 25, 2025 at 6:09 AM, Mohammad Amir : Good morning @FA Please check C1STKC71_M02_OP01 there is Data Mismatch error. Thank you very much! June 25, 2025 at 6:10 AM, Mohammad Amir : @FA Please also check E0STKC51_M10 there is INV-01 Runtime Over error and it is blocking the job for reel LTC0748. Thank you very much! June 25, 2025 at 6:20 AM, Mohammad Amir : @FA Please check CA Robot #3 ,it is OOS and because of this empty magazine delivery is getting delayed. Thank you very much! June 25, 2025 at 6:20 AM, Mohammad Amir : @FA Please check CA NC AGV#5 it is blocking other AGVs and Magazine empty delivery is getting delayed. Thank you very much! June 25, 2025 at 6:21 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 0 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 25, 2025 at 6:27 AM, Mohammad Amir : @FA Please check E0CNVA52 _RTV01 it is in error and because of this AN reels delivery has stopped. Thank you very much! June 25, 2025 at 6:28 AM, Mohammad Amir : @FA @Nagy Tibor Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! June 25, 2025 at 6:29 AM, Mohammad Amir : @Manufacturing Please check and confirm me which carrier actually exists on VD AN 4-1 P04? Thank you very much! June 25, 2025 at 6:33 AM, 정은탁 (Jung EunTak) : @FA VD An 2-3(#12) , 6-8(#53) VD Ca 1-6(#06) UR half chamber. please check. June 25, 2025 at 6:33 AM, Mohammad Amir : Checking! June 25, 2025 at 6:40 AM, Mohammad Amir : This message was deleted. June 25, 2025 at 6:42 AM, Mohammad Amir : Good morning, For 6-8 VD AN:- There is an active LR but currently no material available that's why half chamber situation. For VD AN 2-3:- During unloading ,we received Null carriers id in our system form equipment side that's why automatic UR jobs not created,I have created manual jobs to transfer these carriers to Post VD STK. Thank you very much! June 25, 2025 at 6:45 AM, Mohammad Amir : For VD CA 1-6, Issue has been resolved ✅. AGV#7 has been assigned to unload ✅. The operator cancelled the automatic jobs that's why such situation occurred. Thank you very much! June 25, 2025 at 6:55 AM, Mohammad Amir : Good morning @FA Please check C1STKA72_C02 there is Load Oversize error and Anode stacking materials delivery has stopped. Please check the issue on priority. Thank you very much! June 25, 2025 at 6:56 AM, Mohammad Amir : Update:- VD CA 1-6 has been successfully unloaded ✅. I am monitoring. Thank you very much! June 25, 2025 at 7:18 AM, Mohammad Amir : @FA Please check C1STKC72_P09 there is INV-01 Run Time over Error. Thank you very much! June 25, 2025 at 7:23 AM, Mohammad Amir : @FA Please check VD CA AGV#7 is in Manual mode and it is blocking AGV#2 ,#5,#9 causing traffic and resulting delay in LR and UR jobs. Thank you very much! June 25, 2025 at 7:23 AM, Mohammad Amir : @FA Please also check VD CA AGV#3 is in Manual mode and it is blocking AGV#6,#1,#10,#8causing traffic and resulting delay in LR and UR jobs. Thank you very much! June 25, 2025 at 7:24 AM, Mohammad Amir : Anode side*** June 25, 2025 at 7:24 AM, Mohammad Amir : Anode side**** June 25, 2025 at 7:25 AM, 김종원 invited 송태용(Song tae yong). June 25, 2025 at 7:30 AM, P.Bence A SSL : Please check again thank you . June 25, 2025 at 7:30 AM, Mohammad Amir : Sure, Checking! June 25, 2025 at 7:32 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 18 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 19 • Cathode:140 GF NC reel Available :- • AN: 181 • CA: 118 ///////////////////////////////////////// VD Unload request .Anode: 26 .Cathode: 02 Load request(Exist Jobs) .Anode:22 .Cathode:02 Load request waiting for materials: Anode:70 Cathode:127 Thank you very much! June 25, 2025 at 7:32 AM, Mohammad Amir : @P.Bence A SSL For your information as well. Thank you very much! June 25, 2025 at 7:38 AM, Mohammad Amir : Update :- VD AN 2-3 has also been successfully unloaded ✅. Thank you very much! June 25, 2025 at 8:17 AM, Mohammad Amir : @FA Please check C1STKC71_C02 there is Laod Oversize error. Thank you very much! June 25, 2025 at 8:18 AM, Sazzad Bhai SKon : @FA There are 10 UNKDUP carriers in GF. Please check them. C1STKA71 (0201301, 0200903, 0200901) C1STKA72 (0205706, 0105904, 0200104, 0205501,0100103,0205801) C1STKC72 (0205905) They're also in hold state June 25, 2025 at 8:19 AM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician AnNC June 25, 2025 at 8:29 AM, Mohammad Amir : @FA Please check CA NC RTV01 there is lift unload destination off error and because of this CA reels delivery has stopped. Thank you very much! June 25, 2025 at 8:32 AM, Barta Rudi : @Fa NC ca AGV 10 stop please check thank you June 25, 2025 at 8:32 AM, 김동섭 : GF AN VD 1-4 좌측플레이트 상,하 안착불량 입니다. AGV로 재안착 부탁드립니다 June 25, 2025 at 8:34 AM, Sazzad Bhai SKon : @FA All of the magazines of this plate is duplicated. MLA6078 (C1STKA71, 0200302) : MA5084, 5245, 1518, 3571, 4115, 4438. Due to this, several carriers are in hold state. June 25, 2025 at 8:37 AM, 이도형 (Lee) : @FA E0STKC51 화물 오버사이즈 발생 확인 부탁드립니다. June 25, 2025 at 8:41 AM, 이도형 (Lee) : @FA E0STKC51 Cargo oversize occurred Please check June 25, 2025 at 8:42 AM, Mohammad Amir : @FA Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! June 25, 2025 at 8:43 AM, Nguyên : please pay attention when put full MGZ tray into warehouse. because AGV has take it back to notching and put into machine June 25, 2025 at 8:44 AM, Nguyên : please check and pay for me. thank you June 25, 2025 at 8:44 AM, Nguyên : AN NC GF June 25, 2025 at 8:49 AM, 김동섭 : GF AN VD 1-4 좌측플레이트 상,하 안착불량 입니다. AGV로 재안착 부탁드립니다 June 25, 2025 at 8:53 AM, 배병민 (Bae Byoungmin) : This message was deleted. June 25, 2025 at 8:54 AM, 배병민 (Bae Byoungmin) : @Nandia FA June 25, 2025 at 8:56 AM, KIM SEYEON [김세연]_FA : 06.25 Day shift 1F -Tumuruu (All) GF -Nandin (An.ST) -Amgaa(Ca.ST) -Ganbat (VD) -Ankhaa(NC) June 25, 2025 at 9:04 AM, 김동섭 : GF AN VD AGV2 에러로 섯습니다 June 25, 2025 at 9:08 AM, KIM SEYEON [김세연]_FA : @Ganbaa FA please check GF AN VD AGV2 June 25, 2025 at 9:09 AM, 이도형 (Lee) : @FA An VD There are a lot of full magazines, please put them in the warehouse. June 25, 2025 at 9:09 AM, 김동섭 : 해결됐습니다 June 25, 2025 at 9:12 AM, Nguyên : NC AN GF 3/2. 6/3. 5/3. 6/1 Give priority to AGV to pick up goods at. Thanh you June 25, 2025 at 9:12 AM, Mohammad Amir : Sure, Checking! June 25, 2025 at 9:13 AM, 이도형 (Lee) : @FA "Please ensure full and empty magazines are properly sorted before loading into the front warehouse. - From SCS." June 25, 2025 at 9:16 AM, Mohammad Amir : Hello, I have given priority to all the mentioned machines. For 5-3 NC AN:- AGV#5 has assigned ✅ For NC 3-8 AN:- AGV#8 has picked the Good successfully ✅. Thank you very much! June 25, 2025 at 9:35 AM, 정다은 : This message was deleted. June 25, 2025 at 9:35 AM, 정다은 : @Mohammad Amir Dear, could you share current status? June 25, 2025 at 9:36 AM, Mohammad Amir : Sure, Checking! June 25, 2025 at 9:38 AM, KIM SEYEON [김세연]_FA : @Ankhaa/Ivancsa FA @Ganbaa FA @Amgaa FA @Nandia FA please take special care on 10:00-12:00 today. error reset quickly please. thanks. June 25, 2025 at 9:40 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 04 • Cathode: 01 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 23 • Cathode:125 GF NC reel Available :- • AN: 195 • CA: 135 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 00 Load request(Exist Jobs) .Anode:02 .Cathode:02 Load request waiting for materials: Anode:102 Cathode:109 Thank you very much! June 25, 2025 at 9:54 AM, 이도형 (Lee) : @FA @Mohammad Amir UNKDBS-250505100125A 메뉴얼로 배출 불가 확인부탁드립니다. June 25, 2025 at 9:55 AM, Mohammad Amir : Sure Checking! June 25, 2025 at 10:05 AM, Sazzad Bhai SKon : MCS doesn't have this carrier information June 25, 2025 at 10:20 AM, 이도형 (Lee) : @FA PM님 UNKDBS-250505100125A Shelf > 01-011-04 E0STKC51_M10 배출해주세요 부탁드립니다. June 25, 2025 at 10:23 AM, Sazzad Bhai SKon : Yes we found it, UNKEMP- June 25, 2025 at 10:26 AM, Sazzad Bhai SKon : Please delete the previous job from scs June 25, 2025 at 10:27 AM, 김동섭 : GF AN VD 6-8 하프챔버 상태 입니다 June 25, 2025 at 10:34 AM, Sazzad Bhai SKon : job is created. But shelf 01-011-04 is not in-service, though it shows in service in the MCS system. Please check from SCS and reset the status June 25, 2025 at 10:35 AM, 이도형 (Lee) : "I deleted it earlier." June 25, 2025 at 10:36 AM, 이도형 (Lee) : I'll try again and let you know if I have any questions." June 25, 2025 at 10:54 AM, Mohammad Amir : @FA Please check NC AN RTV01 it is OOS and reels delivery has stopped. Thank you very much! June 25, 2025 at 10:56 AM, 김동섭 : GF AN VD 1-3 수리를 위해서 AGV로 반송 부탁드립니다 June 25, 2025 at 10:57 AM, Mohammad Amir : Sir, Please confirm ,you would like me to return materials located at AN VD 1-3 to the Post VD warehouse? Thank you very much! June 25, 2025 at 10:59 AM, P.Bence A SSL : Hello @Mohammad Amir A lot of anode nc machines are standing still because Agv is not arriving June 25, 2025 at 11:00 AM, Mohammad Amir : Hello, Could you please tell me you are referring to empty magazine or full magazine? Thank you very much! June 25, 2025 at 11:00 AM, P.Bence A SSL : All machine full 2-2 2-3 June 25, 2025 at 11:01 AM, Mohammad Amir : Sure, I am checking what is the cause of this issue. June 25, 2025 at 11:01 AM, 김동섭 : 네 건조전 입니다 June 25, 2025 at 11:01 AM, 정은탁 (Jung EunTak) : @FA NC An' AGV UR 지연으로 인한 비가동 발생 2-2 10:08~ 2-3 10:21~ 3-1 10:07~ 4-1 10:51~ 4-3 10:48~ 5-1 10:50~ 5-2 10:20~ 6-1 10:40~ 6-3 10:24~ Out Port 12Mgz UR 지연으로 인한 음극 노칭설비 비가동 발생중 입니다. 우선순위 조정 부탁드립니다. June 25, 2025 at 11:02 AM, Mohammad Amir : Sure Sir, I am working on it. June 25, 2025 at 11:02 AM, Mohammad Amir : I am checking! June 25, 2025 at 11:05 AM, Mohammad Amir : Issue has been resolved ✅ AGV #8 has been assigned to 2-2. And for 2-3 , currently waiting for the AGV. Thank you very much! June 25, 2025 at 11:05 AM, Nguyên : NC AN GF 2/3. 3/1. 5/3. 6/3. 5/2 .5/1. 6/1 Give priority to AGV to pick up goods at. Thanh you June 25, 2025 at 11:05 AM, Mohammad Amir : Sure,I am working on it. June 25, 2025 at 11:09 AM, Mohammad Amir : Sir, Issue has been resolved ✅ AGV#2 has been assigned to 4-1 NC AN. AGV#8 to 2-2 . AGV#6 to 5-2. AGV#9 to 6-1. AGV#7 to 6-3. AGV#3 to 2-3. Other are waiting for AGVs as all AVVs are busy now. Thank you very much! June 25, 2025 at 11:10 AM, Mohammad Amir : @Nguyên for your information. Thank you very much! June 25, 2025 at 11:16 AM, Mohammad Amir : Dear Sir, Sorry for delay ,I was solving other cases as well. Now I have created the command to send the materials to the STK successfully ✅. AGV#8 and #9 has been successfully Assigned ✅. Thank you very much! June 25, 2025 at 11:17 AM, Sazzad Bhai SKon : @FA AN slitter CNV is oos. Are you working on this? June 25, 2025 at 11:30 AM, Nguyên : NC GF AN 5/1 AGV #9 error Come check for me June 25, 2025 at 11:31 AM, Mohammad Amir : @Amgaa FA Please check NC AN AG #5 is in Manual mode and it is blocking AGV#7 resulting in delay of LR UR tasks . Please take action. Thank you very much! June 25, 2025 at 11:32 AM, Mohammad Amir : Sir, Update :- VD AN 1-3 has been successfully unloaded ✅. Thank you very much! June 25, 2025 at 11:41 AM, 정은탁 (Jung EunTak) : @FA NC Ca AGV #10 Error. Please Check. June 25, 2025 at 11:45 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 32 • Cathode:108 GF NC reel Available :- • AN: 203 • CA: 150 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 04 Load request(Exist Jobs) .Anode:06 .Cathode:06 Load request waiting for materials: Anode:84 Cathode:85 Thank you very much! June 25, 2025 at 11:51 AM, Nguyên : NC GF AN 5/2 AGV #9 error Come check for me June 25, 2025 at 12:07 PM, Nguyên : Come check for me 1/3 long time no empty MGZ Thanh you June 25, 2025 at 12:07 PM, Nguyên : NC AN GF June 25, 2025 at 12:11 PM, Mohammad Amir : @FA Please check E0STKC51_C01 ready off during Forking error. Thank you very much! June 25, 2025 at 12:13 PM, Sazzad Bhai SKon : Jobs on the way June 25, 2025 at 12:17 PM, P.Bence A SSL : L3 stacking agv8 stop please check June 25, 2025 at 12:39 PM, P.Bence A SSL : ……….. June 25, 2025 at 12:43 PM, Nguyên : NC CA GF ROBOT #3 ERROR Come for me Thank you June 25, 2025 at 12:46 PM, 이도형 (Lee) : @FA NC Ca #10 AGV is stopped. Please check June 25, 2025 at 12:47 PM, P.Bence A SSL : Check again please June 25, 2025 at 12:47 PM, Mohammad Amir : Sure, Checking! June 25, 2025 at 12:49 PM, Barta Rudi : @FA NC ca 4/1 AGV 10 stop please check thank you!! June 25, 2025 at 12:50 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 21 • Cathode: 09 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 08 • Cathode:85 GF NC reel Available :- • AN: 209 • CA: 150 ///////////////////////////////////////// VD Unload request .Anode: 15 .Cathode: 04 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:72 Cathode:82 Thank you very much! June 25, 2025 at 12:56 PM, P.Bence A SSL : L3 stacking Agv 6 stop please check . June 25, 2025 at 1:06 PM, Anita Mirosnicsenko : Hello! Line 2 STK AGV 2 stopped, please check! Thank you! June 25, 2025 at 1:09 PM, Mohammad Amir : @FA Please check CA Reel LTC0157 located at E0CNVC52-09-052 it is not moving and blocking reels delivery. Everything is good from MCS RTD side ✅ Please check physically. Thank you very much! June 25, 2025 at 1:15 PM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician Cathode NC June 25, 2025 at 1:16 PM, Mohammad Amir : @FA Please check this issue on priority it is delaying CA Reels production. Thank you very much! June 25, 2025 at 1:17 PM, P.Bence A SSL : L3 stacking again Agv 8 stop please check June 25, 2025 at 1:19 PM, P.Bence A SSL : No one checks the error and there is no longer a ca magazine on the line.. June 25, 2025 at 1:39 PM, Mohammad Amir : @Manufacturing @P.Bence A SSL Please check C1CNV072_M01 and remove 1+2 carriers from it,it will increase stacking materials delivery speed. Thank you ! June 25, 2025 at 1:43 PM, Nguyên : NC AN GF 1/2. 2/3. 6/2. 2/2 Give priority to AGV to pick up goods at. Thanh you June 25, 2025 at 1:43 PM, Mohammad Amir : Sure, Checking! June 25, 2025 at 1:46 PM, Mohammad Amir : Hello, Priority has been provided to all the mentioned machines. AGV#5 has been assigned for 6-2 successfully ✅. Other are waiting for AGVs as all AGVs are currently busy. For your information:- Currently 7 AGVs are in use and they are in production. Currently 3 AGVs are charging. Thank you very much! June 25, 2025 at 1:51 PM, Mohammad Amir : @FA Please check this issue it exists since 12:02. Thank you very much! June 25, 2025 at 1:52 PM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Ready off during Forking error. Thank you very much! June 25, 2025 at 2:01 PM, 조범희 : Please check the available quantity June 25, 2025 at 2:02 PM, Mohammad Amir : Sure, Checking! June 25, 2025 at 2:03 PM, 김종원 : @FA Technician Please come VD An C1STKA71 June 25, 2025 at 2:04 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 26 • Cathode: 18 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 29 • Cathode:87 GF NC reel Available :- • AN: 189 • CA: 08 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 04 Load request(Exist Jobs) .Anode:04 .Cathode:08 Load request waiting for materials: Anode:96 Cathode:86 Thank you very much! June 25, 2025 at 2:09 PM, Mohammad Amir : @FA Please check E0STKA51/52_C02 there is Port interface error. Thank you very much! June 25, 2025 at 2:19 PM, Mohammad Amir : @FA Please check MLA6105 located at C1STKA71_P21 it is not moving and causing traffic on recovery CNV. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! June 25, 2025 at 2:19 PM, Mohammad Amir : @Imre Please check this issue. Thank you very much! June 25, 2025 at 2:20 PM, Mohammad Amir : Issue has been resolved ✅. No need to check. Thank you very much! June 25, 2025 at 2:21 PM, Mohammad Amir : @Imre Please check this issue ,it still exists. Thank you very much! June 25, 2025 at 2:29 PM, Eduard SL Shift A : Line 4 ST 15 AGV 1 stopped please check June 25, 2025 at 2:48 PM, Mohammad Amir : @FA Please check and confirm is E0STKA51 still under maintenance cause there is severe shortages of Anode reels . Thank you very much! June 25, 2025 at 2:49 PM, Mohammad Amir : @Manufacturing Please check E0CNVC52_M10 there is a job to delivery reels however RTV can't deliver. Please check the port M10 , because of this RTV is busy and Reels delivery has stopped in Ca side. Everything is good from MCS RTD side ✅. Thank you very much! June 25, 2025 at 2:50 PM, Kim Dongju(김동주)_FA : @Mohammad Amir please send empty magazine plate at C1STKA71 to C1STKA71_M01 Port - Quantity : 10 plate June 25, 2025 at 2:50 PM, Mohammad Amir : Sure Sir, working on it. June 25, 2025 at 2:56 PM, Mohammad Amir : @FA Could you please heck this issue ,CA reels delivery has stopped because of this issue. Thank you very much! June 25, 2025 at 3:25 PM, Mohammad Amir : @FA Could you please heck this issue ,CA reels delivery has stopped because of this issue. Thank you very much! June 25, 2025 at 3:37 PM, Amgaa FA : @Mohammad Amir An error occurs when AGV 8 tries to unload materials at port C4STM150_PO2 with full materials. ST AN line 4 Please check. Thank you. June 25, 2025 at 3:37 PM, Mohammad Amir : Sure Checking! June 25, 2025 at 3:38 PM, 박시우 : @FA Please check AN NC #5 The obstacle error is for a while June 25, 2025 at 3:39 PM, Mohammad Amir : Is there any carrier actually exists on C4STM150_P02? Thank you very much! June 25, 2025 at 3:41 PM, Nandia FA : yes June 25, 2025 at 3:41 PM, Mohammad Amir : Tell me id of this carrier, please! Thank you very much! June 25, 2025 at 3:43 PM, Nandia FA : H20250625150641925238-MLA0143 June 25, 2025 at 3:45 PM, Mohammad Amir : This carrier is currently on AGV#8. I would like to know that port P02_C4STM150 is empty or it has some carrier ? Thank you very much! June 25, 2025 at 3:45 PM, Eduard SL Shift A : line 6 ST slow delivery AN magazine. please check June 25, 2025 at 3:47 PM, Amgaa FA : MLA1234 June 25, 2025 at 3:47 PM, Mohammad Amir : Hello, One materials on the way with AGV#5 to 6-6 and after there is no material available, unfortunately that's why you witnessed delay. Thank you very much! June 25, 2025 at 3:48 PM, Mohammad Amir : Thank you very much for the confirmation. I am working on the issue. June 25, 2025 at 3:52 PM, Mohammad Amir : This message was deleted. June 25, 2025 at 3:53 PM, Mohammad Amir : Issue has been resolved ✅. Feel free to contact me again if you face further issues. Thank you very much! June 25, 2025 at 3:54 PM, P.Bence A SSL : @Mohammad Amir L6 right side 0 anode full mgz please check June 25, 2025 at 3:55 PM, Mohammad Amir : Currently we don't have any Anode full materials available in the warehouse. Thank you very much! June 25, 2025 at 3:55 PM, Mohammad Amir : @Nandia FA for your information as well. Thank you very much! June 25, 2025 at 3:58 PM, Nadiia Arkhipova : Line 4 ST 18 AGV 4 stopped please check June 25, 2025 at 3:58 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 31 • Cathode: 25 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:92 GF NC reel Available :- • AN: 201 • CA: 173 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 00 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:22 Cathode:36 Thank you very much! June 25, 2025 at 4:03 PM, Mohammad Amir : @FA Please check C1CNV072_16_126/124 there is Data loss error and it is blocking stacking materials delivery. Thank you very much! June 25, 2025 at 4:14 PM, Amgaa FA : @Mohammad Amir AGV1 is standing without any order with MLA1168 material. please check it. Thank you very much June 25, 2025 at 4:14 PM, Amgaa FA : STA CA June 25, 2025 at 4:14 PM, Mohammad Amir : Sure Checking June 25, 2025 at 4:16 PM, Nandia FA : @Amir(MCS) An error occurs when AGV 4 tries to unload materials at port C1STM20_PO2 with full materials. ST AN line 4 Please check. Thank you. June 25, 2025 at 4:16 PM, Mohammad Amir : Issue has been resolved ✅. AGV#1 has started to move. Feel free to contact me if you need further assistance. Thank you very much! June 25, 2025 at 4:16 PM, Mohammad Amir : Sure, Checking June 25, 2025 at 4:22 PM, Mohammad Amir : I have resolved the issue ,it will not unload to full carrier.✅. Please check AGV#4 currently it is in error that's why it is not moving. Thank you very much! June 25, 2025 at 4:31 PM, Mohammad Amir : @Amgaa FA Please check ST Line-1 AGV#4 it is in error and blocking other AGVs. Thank you very much! June 25, 2025 at 4:34 PM, Amgaa FA : @Mohammad Amir An error occurs when AGV 6 tries to unload materials at port C4STM150_PO2 with full materials. ST AN line 4 Please check. Thank you. ID carrier MLA1234 June 25, 2025 at 4:34 PM, Mohammad Amir : Sure, Checking! June 25, 2025 at 4:35 PM, Amgaa FA : Korean team are working on AGV4. June 25, 2025 at 4:36 PM, Mohammad Amir : Issue has been resolved ✅. Now it will not come. Let me know if you need any further assistance. Thank you very much! June 25, 2025 at 5:14 PM, Amgaa FA : @Mohammad Amir An error occurs when AGV 8 tries to unload materials at port C1STM020_PO1 with full materials. ST AN line 1. Carrier id MLA2007. Please check. Thank you very much June 25, 2025 at 5:17 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! June 25, 2025 at 5:27 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 24 • Cathode: 25 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:82 GF NC reel Available :- • AN: 197 • CA: 165 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode:10 .Cathode:10 Load request waiting for materials: Anode:81 Cathode:93 Thank you very much! June 25, 2025 at 5:39 PM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Port interface error and CA reels delivery has stopped. Thank you very much! June 25, 2025 at 5:44 PM, Mohammad Amir : @Imre Please check this issue. Thank you very much! June 25, 2025 at 5:58 PM, Debreczeni Ármin : @Szücs Géza FT-B Szia L6nál van a két új kolléga June 25, 2025 at 6:05 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.25. "B" műszak, 11+2+2/12+2 Tech, 1SL Overtime(2): Gégény Dávid, Kertész Dániel Holiday(1): Böröczki Balázs Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Electrode(4): Rácz Dániel, Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Csanálosi Gábor, Kertész Dániel, Kovács Ágnes --------------- Assy 1F (3): Gégény Dávid, Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovits Kevin, Denkó János, June 25, 2025 at 6:05 PM, Szücs Géza FT-B : szia, rendben June 25, 2025 at 6:13 PM, 김현태 : NC CA AGV #10 error Thanks June 25, 2025 at 6:35 PM, Gua/ IvancsaFa : @mcs please delete the job of NC AN AGV6. the port is full. thank you. June 25, 2025 at 6:37 PM, VK (mcs) : Job canceled June 25, 2025 at 6:46 PM, Lan Nhi : @ FA Hello. Please help me with AGV unloading the goods at machine 6-2 VD/ Shift. The goods were finished drying at 12:23. Thank you. June 25, 2025 at 6:52 PM, 최명운(CHOI MYOUNGWOON) : @Noémi (소미) 음극 노칭으로 와주실래요? June 25, 2025 at 6:52 PM, Diana : Hello, problem with AGV2 on the line 3/STK17. Can you solve this problem, thank you June 25, 2025 at 6:54 PM, Zaya/ivancsa FA : solved June 25, 2025 at 6:56 PM, Debreczeni Ármin : @VK (mcs) share lot quantity please June 25, 2025 at 7:03 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 44 • Cathode: 44 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:50 GF NC reel Available : • AN: 175 • CA: 177 ///////////////////////////////////////// VD Unload request .Anode: 16 .Cathode: 00 Load request(Exist Jobs) .Anode:04 .Cathode:10 Load request waiting for materials: Anode:69 Cathode:93 June 25, 2025 at 7:04 PM, Lan Nhi : @FA Please check for me. Example: Machine 4-7 finished drying at 15:24 but AGV has not unloaded the goods yet. June 25, 2025 at 7:09 PM, VK (mcs) : Hello, please tell me which side Anode or cathode? June 25, 2025 at 7:15 PM, Lan Nhi : Machine 4-7 is negative pole An. Machine 5-7 is positive pole Ca. June 25, 2025 at 7:19 PM, VK (mcs) : 4/7 anode Port 1 MLA6078 Carrier location mismatch! 5/7 cathode It's not dried yet. The expected end time is 23:06 June 25, 2025 at 7:22 PM, VK (mcs) : @FA. @Manufacturing We have a carrier mismatch location problem (MLA6078) It's located in anode Post-STK A72 C1STKA72 (0205501) Please rack it out/in . June 25, 2025 at 7:22 PM, Lan Nhi : Sorry. Example: Machine case 6-2 is dry but not disassembled. June 25, 2025 at 7:24 PM, Lan Nhi : 4/7 An please give me the machine, it was dried at 15:34 June 25, 2025 at 7:25 PM, VK (mcs) : Please confirm with Carrie ID This one also has a mismatched location June 25, 2025 at 7:27 PM, VK (mcs) : Carrier location is mismatched. Please confirm carrier IDs in Machine June 25, 2025 at 7:27 PM, Lan Nhi : yes. thanks for your information June 25, 2025 at 7:29 PM, 김현태 : @FA Please send the plates in the VD AN 5-7 chamber to the warehouse June 25, 2025 at 7:32 PM, Khaliun/Ivancsa FA : @MCS June 25, 2025 at 7:36 PM, VK (mcs) : @김지수PM(Gyuri)_FA Please check it out. Thx June 25, 2025 at 7:41 PM, 김지수PM(Gyuri)_FA : 6호기4호기 할당받아서 가고있습니다. June 25, 2025 at 7:43 PM, 김현태 : 감사합니다 June 25, 2025 at 7:47 PM, Zaya/ivancsa FA invited Usukhuu /ivancsa FA. June 25, 2025 at 7:53 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 C02 Inactive stop June 25, 2025 at 7:54 PM, Kertész Dániel : Thank you! June 25, 2025 at 7:54 PM, Kertész Dániel : Now it works June 25, 2025 at 9:01 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity June 25, 2025 at 9:08 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 17 • Cathode: 26 Pre STK > VD • Anode: 00 • Cathode: 02 Post STK > Stacking • Anode: 08 • Cathode:77 GF NC reel Available : • AN: 162 • CA: 191 ///////////////////////////////////////// VD Unload request .Anode: 06 .Cathode: 03 Load request(Exist Jobs) .Anode:20 .Cathode:02 Load request waiting for materials: Anode:66 Cathode:74 June 25, 2025 at 9:35 PM, Khaliun/Ivancsa FA : @fa tech check pls NC AN Robot#3 June 25, 2025 at 9:45 PM, Kovács Ágnes : Solved June 25, 2025 at 9:55 PM, Lan Nhi : @ FA plz check for me. VD/ AN machine 3-8 goods are dry but agv still not disassembled June 25, 2025 at 9:59 PM, VK (mcs) : Port 3 has mismatch location error. Please adjust carrier ID and apply UR again. June 25, 2025 at 10:17 PM, 김지수PM(Gyuri)_FA : @fa please check e0stkc51 >ap error June 25, 2025 at 11:01 PM, 김지수PM(Gyuri)_FA : @manufacturing CA VD 2-8 P01 P02 > cannot detect cargo, please check it Thanks June 25, 2025 at 11:05 PM, Debreczeni Ármin : @VK (mcs) please share lot quantity June 25, 2025 at 11:09 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 10 Pre STK > VD • Anode: 02 • Cathode: 03 Post STK > Stacking • Anode: 39 • Cathode:72 GF NC reel Available : • AN: 164 • CA: 204 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 08 Load request(Exist Jobs) .Anode:05 .Cathode:06 Load request waiting for materials: Anode:62 Cathode:62 June 26, 2025 at 12:07 AM June 26, 2025 at 12:07 AM, Debreczeni Ármin : Agv didnt take empty magazine from line 5/13 st (AN) Station number 47 (unit 14) June 26, 2025 at 12:12 AM, 김지수PM(Gyuri)_FA : There was no UR on that port June 26, 2025 at 12:14 AM, Debreczeni Ármin : I refreshed a few minutes ago June 26, 2025 at 12:14 AM, 김지수PM(Gyuri)_FA : Could you please let me know the carrier ID? June 26, 2025 at 12:15 AM, VK (mcs) : Can you please tell me equipment ID? June 26, 2025 at 12:16 AM, Debreczeni Ármin : Unit 14 Id: MLA6111 if you mean this June 26, 2025 at 12:16 AM, 김지수PM(Gyuri)_FA : Please change the location information IN RTD, thanks MLA6111 June 26, 2025 at 12:17 AM, Debreczeni Ármin : Auto screen show miss match error June 26, 2025 at 12:17 AM, VK (mcs) : Yes carrier location mismatched MES shows its in the STKA72 . June 26, 2025 at 12:17 AM, VK (mcs) : McS* June 26, 2025 at 12:18 AM, VK (mcs) : Please transfer it manually June 26, 2025 at 12:18 AM, 김지수PM(Gyuri)_FA : Please click the UR again June 26, 2025 at 12:24 AM, VK (mcs) : Since yesterday, we are encountered several mismatch location problem in VD and stacking area. It seems operations manually transferring material from VD to STK and information mismatches. For your reference : MLA6078 C1STKA72(0205501) VD anode 4/7 port 1 MLC6247 C2STKC72(0204302) VD cathode 6/2 port 2 June 26, 2025 at 12:27 AM, 김지수PM(Gyuri)_FA : Yes i checked the UR, updated the location information. Thanks June 26, 2025 at 12:29 AM, Lan Nhi : @FA Please check the 6-2 VD/Ca machine for me, the ID matches the supplier but currently AGV has not yet unloaded the goods. June 26, 2025 at 12:31 AM, VK (mcs) : And now we have 2 MLA6111 SCS: C1STKA72(0100201) MCS : on the AGV 2 transferring to circular conveyor. June 26, 2025 at 12:32 AM, 김지수PM(Gyuri)_FA : I will send our memeber to rack out stored 6111 June 26, 2025 at 12:33 AM, VK (mcs) : @김지수PM(Gyuri)_FA This is the another mismatch issue🥲 June 26, 2025 at 12:33 AM, 김지수PM(Gyuri)_FA : Yes I will rack out all of the mismatch carriers thanks 🥲 June 26, 2025 at 12:35 AM, VK (mcs) : This one is interesting. One is located in VD 6/2port 2 And another is on first floor cathode STK! June 26, 2025 at 12:35 AM, 김지수PM(Gyuri)_FA : Probably both of them have same barcodes June 26, 2025 at 12:36 AM, VK (mcs) : Exactly, but one of them probably has different ID in the side June 26, 2025 at 12:39 AM, 인제(Hwang) : NC Ca Robot#3 Error June 26, 2025 at 12:40 AM, Kovács Ágnes : Going June 26, 2025 at 12:45 AM, Debreczeni Ármin : @VK (mcs) please share lot quantity thank you June 26, 2025 at 12:52 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 14 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 20 • Cathode:82 GF NC reel Available : • AN: 168 • CA: 224 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 06 Load request(Exist Jobs) .Anode:08 .Cathode:00 Load request waiting for materials: Anode:44 Cathode:78 June 26, 2025 at 12:54 AM, VK (mcs) : Can you please tell me carriers ID. If possible to check. Thx June 26, 2025 at 12:58 AM, Lan Nhi : This message was deleted. June 26, 2025 at 12:58 AM, Lan Nhi : MLC0003 June 26, 2025 at 1:01 AM, VK (mcs) : I mean for all ports Is MLC6247 located in port 2? Can you check both sides June 26, 2025 at 1:03 AM, 김지수PM(Gyuri)_FA : 1F c2stkc72 MLC6247 >OK Mc 9210 Mca 482 MC 9147 mc9418 I checked June 26, 2025 at 1:06 AM, VK (mcs) : Then what is the carrier ID in VD 6/2 port 2 Most probably this one has a different ID. June 26, 2025 at 1:18 AM, Lan Nhi : yes MLC6247 is located on the lower left side of the 6/2 machine June 26, 2025 at 1:24 AM, 인제(Hwang) : @김지수PM(Gyuri)_FA @최명운(CHOI MYOUNGWOON) NC Ca Robot#3 공매거진 아웃포트에 풀매거진 배출되었습니다. 확인 부탁드립니다 June 26, 2025 at 1:45 AM, 김지수PM(Gyuri)_FA : @인제(Hwang) MLC6247 동일 바코드 가진 캐리어가 1F GF에 존재합니다. CA 6-2 P02 에 있는 바코드 교체가 필요해 보입니다. June 26, 2025 at 1:45 AM, 김지수PM(Gyuri)_FA : GF VD 입니다. June 26, 2025 at 1:49 AM, 인제(Hwang) : 건조는 정상완료되었는데 창고반송 가능할까요? 이후 수동출고해서 플레이트 바코드 변경진행해야할것같습니다 June 26, 2025 at 1:51 AM, 김지수PM(Gyuri)_FA : 이거 그냥 두시면, 제가 오피스가서 명령 걸어두겠습니다. June 26, 2025 at 1:51 AM, 김지수PM(Gyuri)_FA : . June 26, 2025 at 1:52 AM, 인제(Hwang) : 감사합니다 June 26, 2025 at 2:02 AM, 김지수PM(Gyuri)_FA : 일단 6-2 P01 P02 만 후창고로 반송을 걸어두겠습니다. June 26, 2025 at 2:03 AM, 인제(Hwang) : 해당 챔버 모든 플레이트 건조완료라 다 반송걸어도 괜찮습니다. 반송되면 바로 꺼내서 해당 플레이트만 바코드 교체 조치하겠습니다 June 26, 2025 at 2:09 AM, 김지수PM(Gyuri)_FA : P01 P02에 있던 캐리어 후창고 들어갔습니다. MLC6247 > 0205904 June 26, 2025 at 2:09 AM, 인제(Hwang) : 확인 후 수동출고 진행중입니다 June 26, 2025 at 2:19 AM, Yosyp Tovt : line 4 ST stopped AGV 2 June 26, 2025 at 2:36 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 11 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 32 • Cathode:96 GF NC reel Available : • AN: 175 • CA: 227 ///////////////////////////////////////// VD Unload request .Anode: 18 .Cathode: 14 Load request(Exist Jobs) .Anode:10 .Cathode:12 Load request waiting for materials: Anode:80 Cathode:90 June 26, 2025 at 3:30 AM, Lan Nhi : @MCS VD- CA 4-4 5-1 3-7 2-6 please refill the remaining chamber for me June 26, 2025 at 3:34 AM, Lan Nhi : @FA VD-CA machine 2-8 is dry, agv can remove 2 pallets, please help me remove the remaining 2 pallets. Thank you June 26, 2025 at 3:35 AM, 김지수PM(Gyuri)_FA : Vc 01 has been assigned June 26, 2025 at 3:36 AM, Lan Nhi : @FA plz check agv #10 error at line 4 NC/Ca June 26, 2025 at 3:38 AM, Khaliun/Ivancsa FA : Solved June 26, 2025 at 3:40 AM, VK (mcs) : 4/4 2/6 Are full already 5/1 3/7 Please apply LR again June 26, 2025 at 3:58 AM, Lan Nhi : Thank you June 26, 2025 at 3:59 AM, 김현태 : NC CA AGV #2 Error Thanks June 26, 2025 at 3:59 AM, 김지수PM(Gyuri)_FA : @인제(Hwang) MLA6111 중복 바코드 > 해당 오븐플레이트 음극 로봇#2옆에 포스트잇으로 중복이라고 표시해두겠습니다. 확인 후, 바코드 교체 좀 부탁드리겠습니다. 감사합니다. June 26, 2025 at 4:22 AM, Debreczeni Ármin : @VK (mcs) send lot quantity please June 26, 2025 at 4:24 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 14 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 52 • Cathode:92 GF NC reel Available : • AN: 189 • CA: 252 ///////////////////////////////////////// VD Unload request .Anode: 11 .Cathode: 04 Load request(Exist Jobs) .Anode:06 .Cathode:12 Load request waiting for materials: Anode:100 Cathode:96 June 26, 2025 at 5:03 AM, Lan Nhi : @MCS Please check again machine 4-7 VD-An all pallet codes match. But until now agv still has not removed it June 26, 2025 at 5:05 AM, VK (mcs) : Carrier ID for port 2 is mismatched. Please adjust it and apply again UR June 26, 2025 at 5:15 AM, 김지수PM(Gyuri)_FA : @인제(Hwang) MLA6118 중복 바코드 > VD 복도 스크린도어 옆에 있습니다. 확인 후 교체부탁드려요 June 26, 2025 at 5:18 AM, 인제(Hwang) : @김지수PM(Gyuri)_FA An VD 4-7 건조완료 후 UR이 안되고있는데 확인 가능하실까요 June 26, 2025 at 5:20 AM, VK (mcs) : Sorry for port 1 June 26, 2025 at 5:44 AM, 김지수PM(Gyuri)_FA : 캐리어정보 미스매치로 인하여 UR이 안 올라갔습니다. June 26, 2025 at 5:46 AM, 인제(Hwang) : 해당 설비 내 플레이트 창고반송 가능한가요? June 26, 2025 at 5:46 AM, 김지수PM(Gyuri)_FA : C1STKA72 0205501 에 MLA6078이 있습니다. June 26, 2025 at 5:46 AM, 김지수PM(Gyuri)_FA : AGV로 일단 잡은 걸어보겠습니다. June 26, 2025 at 5:47 AM, 김지수PM(Gyuri)_FA : 4-7 P01에도 동일한 아이디의 캐리어가 존재합니다. June 26, 2025 at 5:50 AM, 인제(Hwang) : 걸어주시면 바로 꺼내서 조치하겠습니다 June 26, 2025 at 5:50 AM, 김지수PM(Gyuri)_FA : AGV1, 7호기가 할당받았고, 챔버에있는 6078이 창고에 들어가면 UNK자재로 바뀝니다. 두 캐리어 이후, 출고해서 바코드 확인 후 교체좀 부탁드리겠습니다. 감사합니다. June 26, 2025 at 6:12 AM, Tuya Ivancsa FA : Hello VD AN chamber 1-4 PO2 empty.pls delete job. June 26, 2025 at 6:12 AM, Shakir (MCS) : Checking June 26, 2025 at 6:13 AM, Shakir (MCS) : Job has been cancelled, Thanks June 26, 2025 at 6:13 AM, 정은탁 (Jung EunTak) : 후창고 UNK로 입고된 MLA6078 두 플레이트 출고후 실물확인 했습니다. BCR 교체후 후창고 재투입 진행하겠습니다. June 26, 2025 at 6:14 AM, 김지수PM(Gyuri)_FA : 감사합니다. June 26, 2025 at 6:38 AM, Shakir (MCS) : @FA Please check C1STKC72_P09 there is INV-01 Run Time over Error. Thank you June 26, 2025 at 6:40 AM, Elena SL : @Shakir (MCS) good morning! Please check reel conveyor NC CA . Empty carrier doesn't leave ( LTC13379) June 26, 2025 at 6:42 AM, Shakir (MCS) : @FA Please check E0CNVA52_07_006, Data mismatch error Thank you June 26, 2025 at 6:43 AM, Shakir (MCS) : Could you please check carrier Id again June 26, 2025 at 6:45 AM, Elena SL : LTC 1379 sorry ☺️ June 26, 2025 at 6:49 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 26, 2025 at 6:56 AM, Elena SL : Reels not delivered.. June 26, 2025 at 6:58 AM, Shakir (MCS) : I have created new order with high priority. Monitoring Thank you June 26, 2025 at 6:59 AM, Elena SL : Empty carriers don’t move…. June 26, 2025 at 6:59 AM, Elena SL : Now working! Thank you June 26, 2025 at 7:00 AM, Shakir (MCS) : You’re welcome June 26, 2025 at 7:03 AM, 김희래 : @mcs Please check next lot quantity. Thank you. June 26, 2025 at 7:03 AM, Shakir (MCS) : Good morning, checking June 26, 2025 at 7:05 AM, 이도형 (Lee) : @FA NC Ca RTV is stopped. Please check. June 26, 2025 at 7:06 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 14 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 56 • Cathode:76 GF NC reel Available : • AN: 172 • CA: 217 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 08 Load request(Exist Jobs) .Anode:04 .Cathode:04 Load request waiting for materials: Anode:91 Cathode:74 June 26, 2025 at 7:39 AM, Shakir (MCS) : @FA Please check E0STKA51_C01 there is Ready off during Forking error. Thank you June 26, 2025 at 7:46 AM, Shakir (MCS) : @FA Please check C1STKC72_P09 there is INV-01 Run Time over Error. Thank you June 26, 2025 at 8:03 AM, Nguyên : Come check for me 3/1 NC AN AGV has not delivered an empty tray for a long time. Thank you June 26, 2025 at 8:05 AM, Shakir (MCS) : Job initiated for 3/1_P03 NC AN, P04 is OOS. Thank you June 26, 2025 at 8:09 AM, Shakir (MCS) : AGV08 on the way to 3/1 NCAN Thank you June 26, 2025 at 8:19 AM, Shakir (MCS) : @FA Please Check C1STKA72 _C01/C02 there is Light Curtain detected error. Thank you June 26, 2025 at 8:30 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 13 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 55 • Cathode:73 GF NC reel Available : • AN: 148 • CA: 212 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 03 Load request(Exist Jobs) .Anode:06 .Cathode:06 Load request waiting for materials: Anode:95 Cathode:69 June 26, 2025 at 8:35 AM, Tuya Ivancsa FA : @Shakir (MCS) Hello VD CA chamber 2-9 PO2 empty.pls delete job. June 26, 2025 at 8:35 AM, Shakir (MCS) : Checking June 26, 2025 at 8:36 AM, Shakir (MCS) : Job has been cancelled, Thanks June 26, 2025 at 8:41 AM, Shakir (MCS) : @FA Please check C1STKA72_P07 is OOS. Thank you June 26, 2025 at 8:42 AM, Shakir (MCS) : @Nagy Tibor please check June 26, 2025 at 8:43 AM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician Cathode NC June 26, 2025 at 8:44 AM, Nadiia Arkhipova : Line4 Stk16 AGV machine 1 stopped, please check June 26, 2025 at 8:51 AM, Nguyên : NC AN GF AGV #1 Error Come for me Thank you June 26, 2025 at 9:01 AM, 김동섭 : Ca 2-2 하프챔버 입니다.확인 부탁드립니다. June 26, 2025 at 9:04 AM, Shakir (MCS) : LR received for half chamber June 26, 2025 at 9:04 AM, Shakir (MCS) : Material Not available June 26, 2025 at 9:04 AM, 김동섭 : CA 3-7 하프챔버 입니다 확인 부탁드립니다 June 26, 2025 at 9:06 AM, Shakir (MCS) : For 3-7 and 5-1 CA LR received for rest half chamber currently material not available. Thank you June 26, 2025 at 9:07 AM, 김동섭 : 확인 감사합니다. June 26, 2025 at 9:07 AM, Shakir (MCS) : You’re welcome June 26, 2025 at 9:11 AM, 송태용(Song tae yong) : @Mohammad Amir please share available lot June 26, 2025 at 9:12 AM, Shakir (MCS) : Checking June 26, 2025 at 9:18 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 19 Pre STK > VD • Anode: 02 • Cathode: 01 Post STK > Stacking • Anode: 55 • Cathode:68 GF NC reel Available : • AN: 140 • CA: 200 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 12 Load request(Exist Jobs) .Anode:04 .Cathode:06 Load request waiting for materials: Anode:91 Cathode:61 June 26, 2025 at 9:23 AM, 김동섭 : CA VD 2-3앞에 AGV #6 섯습니다 June 26, 2025 at 9:28 AM, 은향(OH EUN HYANG) : @amir(mcs) please share available lot June 26, 2025 at 9:28 AM, Shakir (MCS) : Checking June 26, 2025 at 9:31 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 01 • Cathode: 18 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 52 • Cathode:68 GF NC reel Available : • AN: 136 • CA: 199 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 17 Load request(Exist Jobs) .Anode:04 .Cathode:06 Load request waiting for materials: Anode:87 Cathode:73 June 26, 2025 at 9:35 AM, Amgaa FA : @Shakir (MCS) VD CA AGV8 is standing without any order with MLC6040 and MLC2206 materials. please check it. Thank you very much June 26, 2025 at 9:35 AM, Shakir (MCS) : Checking June 26, 2025 at 9:38 AM, Shakir (MCS) : Issue has been resolved AGV08 started to move Thank you June 26, 2025 at 9:42 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. C1STKA71 (0201102) C1STKA72 (0105002, 0104801, 0104902, 0104901) June 26, 2025 at 10:02 AM, Sazzad Bhai SKon : @FA MLC6245 is suspected to be duplicated. C1STKC72 (0205602) , We need to confirm this also June 26, 2025 at 10:12 AM, Nguyên : Come check for me 3/1 NC AN AGV has not delivered an empty tray for a long time. Thank you June 26, 2025 at 10:17 AM, Shakir (MCS) : LR received material will arrive soon. June 26, 2025 at 10:26 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 13 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 39 • Cathode:85 GF NC reel Available : • AN: 143 • CA: 206 ///////////////////////////////////////// VD Unload request .Anode: 20 .Cathode: 10 Load request(Exist Jobs) .Anode:12 .Cathode:02 Load request waiting for materials: Anode:81 Cathode:85 June 26, 2025 at 10:29 AM, Oleh Kaplinskyi : AGV 1 Line June 26, 2025 at 11:11 AM, Chinges Fa : Can you check VD AN chamber 2-3 error June 26, 2025 at 11:18 AM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 22 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 46 • Cathode:92 GF NC reel Available : • AN: 143 • CA: 190 ///////////////////////////////////////// VD Unload request .Anode: 14 .Cathode: 04 Load request(Exist Jobs) .Anode:18 .Cathode:04 Load request waiting for materials: Anode:81 Cathode:97 June 26, 2025 at 11:35 AM, 김동섭 : BCR TIME ERROR 입니다. BCR 조정 확인 했습니다. June 26, 2025 at 11:49 AM, P.Bence A SSL : L3 agv5 stop please check thank you June 26, 2025 at 12:03 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 20 Pre STK > VD • Anode: 03 • Cathode: 03 Post STK > Stacking • Anode: 55 • Cathode:98 GF NC reel Available : • AN: 139 • CA: 195 ///////////////////////////////////////// VD Unload request .Anode: 05 .Cathode: 04 Load request(Exist Jobs) .Anode:22 .Cathode:00 Load request waiting for materials: Anode:82 Cathode:101 June 26, 2025 at 1:07 PM, Elena SL : @Shakir (MCS) hello. Please check NC CA … no empty delivery mgz June 26, 2025 at 1:11 PM, Hồng Anh SL NC&VD 1F : Pls check for AGV 2. AN nc. Unloade error pls. June 26, 2025 at 1:13 PM, Shakir (MCS) : For 2-3 AGV02 on the way For 1-3 AGV10 on the way For 4-1 AGV04 on the way Jobs exist waiting for AGV, currently all Agvs are busy. June 26, 2025 at 1:13 PM, Elena SL : Thank you 🙏 June 26, 2025 at 1:27 PM, 김동섭 : CA VD 6-1 P4 언로딩 요청 드립니다 June 26, 2025 at 1:28 PM, Elena SL : @Shakir (MCS) CA VD #37 5-1 AGV does not pick up finished material. Please send transport. Plate # MLC1179,MLC4192 Thank you June 26, 2025 at 1:35 PM, Sazzad Bhai SKon : The problem is there was no UR received from this chamber. But I transferred the plates manually now. June 26, 2025 at 1:36 PM, Sazzad Bhai SKon : CA 6-1 has only one plate! June 26, 2025 at 1:37 PM, Sazzad Bhai SKon : AN 5-3, 5-9 also have odd number plates June 26, 2025 at 1:39 PM, Sazzad Bhai SKon : @FA @SCS Please reset the port status C1STKA72_P13/P14. these are showing in-service but actually not June 26, 2025 at 1:41 PM, Elena SL : 5-3 empty 5-9 in the process June 26, 2025 at 1:41 PM, Elena SL : We take manual June 26, 2025 at 1:43 PM, Sazzad Bhai SKon : If the process is done we can transfer from MCS June 26, 2025 at 1:44 PM, Elena SL : Yes please. Process is done. ☑️ June 26, 2025 at 1:44 PM, 김동섭 : Ca VD 5-1 AGV #6 ERROR STOP June 26, 2025 at 1:44 PM, Sopronyi Gábor : Done June 26, 2025 at 1:58 PM, 김동섭 : AN VD1-4 하프챔버 입니다. 확인 부탁드립니다. June 26, 2025 at 1:59 PM, Shakir (MCS) : Just now Job initiated for rest half chamber. Thanks June 26, 2025 at 2:13 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 03 • Cathode: 46 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 41 • Cathode:79 GF NC reel Available : • AN: 131 • CA: 220 ///////////////////////////////////////// VD Unload request .Anode: 05 .Cathode: 04 Load request(Exist Jobs) .Anode:18 .Cathode:10 Load request waiting for materials: Anode:80 Cathode:115 June 26, 2025 at 2:29 PM, Shakir (MCS) : @FA Please check E0CNVC51_08_053/52 run time over error. Thank you June 26, 2025 at 2:53 PM, Shakir (MCS) : @FA Please check E0STKA52_C01 there is Ready off during Forking error. Thank you June 26, 2025 at 2:55 PM, Shakir (MCS) : This message was deleted. June 26, 2025 at 3:03 PM, 김동섭 : AN VD AGV#5 ALARM 입니다 June 26, 2025 at 3:09 PM, 이도형 (Lee) : @FA VD An All AGV is stopped. Please check. June 26, 2025 at 3:13 PM, Shakir (MCS) : @FA Please check AGV03 in Manual mode VD AN blocked other AGVs. June 26, 2025 at 3:17 PM, Deepu Divan FA-Eng : This message was deleted. June 26, 2025 at 3:17 PM, Shakir (MCS) : @Amgaa FA June 26, 2025 at 3:24 PM, 심재훈 : 현재 창고에서 반송불가인 자재들이 얼마나 있는지 알수 있을까요? June 26, 2025 at 3:25 PM, 심재훈 : 실메거진이든, 공메거진이든요. 수분검사가 잘안됬거나, 수동투입이 잘못 되었거나 어떠한 사유로 움직이지 않는 메거진 수량 확인이 필요합니다. June 26, 2025 at 3:25 PM, 심재훈 : @Shakir (MCS) June 26, 2025 at 3:26 PM, 심재훈 : Whether it's a real magazine or a dummy magazine, it is necessary to check the number of magazines that are not moving due to reasons such as improper moisture inspection, incorrect manual loading, or any other cause. June 26, 2025 at 3:30 PM, Sazzad Bhai SKon : Which machine are you talking? Is it stacking? June 26, 2025 at 3:36 PM, 심재훈 : Magazines in the storage June 26, 2025 at 3:37 PM, 심재훈 : Before and after VD storage. I believe there are some magazines which are not moving for a while. June 26, 2025 at 3:40 PM, Sazzad Bhai SKon : I understand now. I'll reply to you soon June 26, 2025 at 3:48 PM, Sazzad Bhai SKon : AN VD: last track out time was 24/06/2025. For CA: one material last track is 1st June (due to lot count 5) Other materials last track is yesterday. June 26, 2025 at 3:51 PM, Sazzad Bhai SKon : Similarly in post VD STK: there are many materials with lot count below < 6. This is the reason they are in the STK for a long time June 26, 2025 at 3:52 PM, Sazzad Bhai SKon : If you give us a specific carrier ID, we can tell the specific reason June 26, 2025 at 4:11 PM, 심재훈 : @Sazzad Bhai SKon How many magazines have not moved from the warehouse to the stacking process for more than one day after VD? June 26, 2025 at 4:12 PM, 심재훈 : How many magazines have not moved from the pre-VD warehouse to VD or NC for more than one day? June 26, 2025 at 4:14 PM, Sazzad Bhai SKon : 8 plates not moving from pre VD STK to VD. 1 since yesterday, 7 since today 12:25 pm June 26, 2025 at 4:14 PM, Sazzad Bhai SKon : This message was deleted. June 26, 2025 at 4:15 PM, Sazzad Bhai SKon : Cathode* June 26, 2025 at 4:16 PM, Sazzad Bhai SKon : For anode: 11 not moving from pre VD STK to VD. 1 since 24/06, 10 since today 14:20. June 26, 2025 at 4:20 PM, Sazzad Bhai SKon : Pre VD STK > notching cathode. 1 is not moving since 09/03, Others since today June 26, 2025 at 4:20 PM, Sazzad Bhai SKon : Anode side: no material available June 26, 2025 at 4:24 PM, 김동섭 : AN VD 4-5 앞 AGV#6 알람 입니다 June 26, 2025 at 4:24 PM, Sazzad Bhai SKon : This is not moving because the shelf 0201503 (C1STKC71) is oos June 26, 2025 at 4:26 PM, 조범희 : @Shakir (MCS) Please check the available materials. June 26, 2025 at 4:26 PM, Shakir (MCS) : Checking June 26, 2025 at 4:28 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 16 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 33 • Cathode:75 GF NC reel Available : • AN: 123 • CA: 242 ///////////////////////////////////////// VD Unload request .Anode: 14 .Cathode: 03 Load request(Exist Jobs) .Anode:18 .Cathode:18 Load request waiting for materials: Anode:72 Cathode:100 June 26, 2025 at 4:39 PM, Tuya Ivancsa FA : @Shakir (MCS) Hello VD CA chamber 2-9 PO2 empty.pls delete job. June 26, 2025 at 4:39 PM, Shakir (MCS) : Checking June 26, 2025 at 4:41 PM, Shakir (MCS) : 2-6 or 2-9 which VD I think 2-6 ?? June 26, 2025 at 4:43 PM, Shakir (MCS) : @Tuya Ivancsa FA June 26, 2025 at 4:45 PM, Shakir (MCS) : @FA Please check C1STKC71_P22 Tray ID loss. Thank you June 26, 2025 at 4:56 PM, Tuya Ivancsa FA : Sorry 2-6 June 26, 2025 at 4:56 PM, Shakir (MCS) : Done ✅ June 26, 2025 at 4:59 PM, Oleh Kaplinskyi : AGV 3 Line June 26, 2025 at 5:21 PM, KIM SEYEON [김세연]_FA : @Shakir (MCS) Please check the available materials. June 26, 2025 at 5:21 PM, Shakir (MCS) : Checking June 26, 2025 at 5:24 PM, Shakir (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 12 • Cathode: 37 Pre STK > VD • Anode: 03 • Cathode: 02 Post STK > Stacking • Anode: 40 • Cathode:53 GF NC reel Available : • AN: 115 • CA: 239 ///////////////////////////////////////// VD Unload request .Anode: 08 .Cathode: 00 Load request(Exist Jobs) .Anode:14 .Cathode:03 Load request waiting for materials: Anode:76 Cathode:91 June 26, 2025 at 5:33 PM, Chinges Fa : @ Shakir MCS VD CAthode chamber 2-1 material full AGV7 material full Pleasa delete job June 26, 2025 at 5:33 PM, Shakir (MCS) : Checking June 26, 2025 at 5:34 PM, Shakir (MCS) : Job cancelled, Thanks June 26, 2025 at 5:34 PM, Chinges Fa : Thank you so much June 26, 2025 at 5:34 PM, Shakir (MCS) : You’re welcome June 26, 2025 at 5:55 PM, 인제(Hwang) : NC An AGV#7 Error June 26, 2025 at 5:55 PM, Ngoc zia : Nc Ca 2.3 #agv3 error June 26, 2025 at 6:05 PM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKC71_C02 Load oversize error Thank you June 26, 2025 at 6:08 PM, Yon Ko/연커/ : Solved June 26, 2025 at 6:14 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.06.26. "B" műszak, 10+2+1/12+2 Tech, 1SL Overtime(1): Fabriczius Gergely Holiday(2): Böröczki Balázs, Csanálosi Gábor Sick(0): Shift Change(0): Translater: Göltl Noémi --------------- Por: Rácz Dániel, Nagy Sándor(op) Electrode(3): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (3): Kovács Ágnes, Fabriczius Gergely NC Op: Gombos Norbert --------------- Assy 1F (2): Pintye Miklós, Takács Ádám --------------- Formation/Modul(3): Gerbovi June 26, 2025 at 6:14 PM, Yon Ko/연커/ : @MCS Check VD CA chamber 2-1 with 3material, Chamber 2-6 is empty, but there is still information remaining on P02. Agv7 is idle with material Please check. June 26, 2025 at 6:19 PM, Zulaa/졸라/Ivancsa FA : @(MCS) Please check. AGV#07 in VD CA. Thank you. June 26, 2025 at 6:28 PM, duzzaman Md (MCS) : 2-1 will be delivered when there's enough material. 2_6is empty in MCS June 26, 2025 at 6:32 PM, duzzaman Md (MCS) : Sent back to stk. Thank you June 26, 2025 at 6:50 PM, 인제(Hwang) : NC Ca AGV#8 Error June 26, 2025 at 7:00 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 02 • Cathode: 33 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 36 • Cathode:43 GF NC reel Available : • AN: 82 • CA: 222 ///////////////////////////////////////// VD Unload request .Anode: 10 .Cathode: 07 Load request(Exist Jobs) .Anode:10 .Cathode:10 Load request waiting for materials: Anode:76 Cathode:78 June 26, 2025 at 7:14 PM, Lan Nhi : @FA Hello plz check VD/AN machine 5-3 finished drying at 10:46 machine 5-9 finished drying at 13:22 it is dry but agv did not receive the information June 26, 2025 at 7:18 PM, 김지수PM(Gyuri)_FA : @fa Please check C1CNV072_P04 Cargo detection is okay,but there is no carrier information in carrier list > MLA3091 and MLA0143 are transferring more than 14hours 🫢 June 26, 2025 at 7:19 PM, duzzaman Md (MCS) : This message was deleted. June 26, 2025 at 7:19 PM, duzzaman Md (MCS) : 5_3 AN VD UR WAS UNSUCCESSFUL CARRIER LOCATION MISSMATCH ,CURRENT LOCATION IS C2STKA71/0100102 Same for VD AN 5_9 UR UNSUCCESSFUL CARRIER LOCATION MISSMATCH ,CURRENT LOCATION IS C2STKA71/0105907 June 26, 2025 at 7:23 PM, Lan Nhi : Yes i get is June 26, 2025 at 7:25 PM, 김지수PM(Gyuri)_FA : @Kovács Ágnes June 26, 2025 at 7:26 PM, F.A.briczius Gergő : Checking June 26, 2025 at 7:30 PM, F.A.briczius Gergő : The MLA4206 is on the port June 26, 2025 at 7:32 PM, 김지수PM(Gyuri)_FA : Is that full MGZ? June 26, 2025 at 7:33 PM, 김지수PM(Gyuri)_FA : Please remove it manually and then put it back to CNV072 manually through M02 June 26, 2025 at 7:34 PM, F.A.briczius Gergő : I solved it. June 26, 2025 at 7:36 PM, F.A.briczius Gergő : We need only a request to transport June 26, 2025 at 7:39 PM, 김지수PM(Gyuri)_FA : Now it will move to 6-7 p02 thanks! June 26, 2025 at 7:40 PM, Sazzad Bhai SKon : It can be a duplicated plate. @Fa please confirm the plate id from these locations June 26, 2025 at 7:40 PM, 김지수PM(Gyuri)_FA : Wait will check it June 26, 2025 at 7:49 PM, 김지수PM(Gyuri)_FA : I checked C5VDA030_P01 = C2STKA71 0100102 But, because of nothing production response, we don't have enough personnel for checking carrier's barcode. It takes some time to make rack out the carrier but also has to check the carrier located in the chamber. Most of the issues are due to duplicated barcodes. We will try to respond as quickly as possible, but please understand that it can be delayed . Thanks @Lan Nhi June 26, 2025 at 7:59 PM, Lan Nhi : yes. thanks for your information, please help June 26, 2025 at 8:13 PM, 김지수PM(Gyuri)_FA : I checked these 2 carriers have same barcode(MLA6008) @Sazzad Bhai SKon please transfer all of these carriers from the AN VD 5-3 to C72. @인제(Hwang) 1F 음극 전창고 매뉴얼포트 왼쪽에 MLA6008(중복 바코드) 카트위에 올려놓았습니다. 바코드 교체 좀 부탁드리겠습니다.감사합니다. June 26, 2025 at 8:14 PM, 김지수PM(Gyuri)_FA : . June 26, 2025 at 8:24 PM, duzzaman Md (MCS) : Sent . Thanks June 26, 2025 at 8:34 PM, duzzaman Md (MCS) : @FA Please check C1STKA72_C02 port interface error. Thank you June 26, 2025 at 8:37 PM, Kovács Ágnes : Going June 26, 2025 at 8:56 PM, Ngoc zia : Nc ca #robot 2 errror June 26, 2025 at 8:59 PM, 김정희(Jeong hee FA) : GFC_NC robot#2 err please June 26, 2025 at 9:03 PM, 전 운 (Jeon Woon) : GF An ST C/V 멈췃는데 확인좀 부탁드려요. 몽골인원 못하는거 같은데요. @방혁 PM(Bang.Hyuk) FA @김지수PM(Gyuri)_FA June 26, 2025 at 9:05 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ @Dariimaa/다리마/Ivancsa please help at GF ST AN CONVEYOR. June 26, 2025 at 9:06 PM, 최명운(CHOI MYOUNGWOON) : 후창고 크래인 조치되면 풀릴겁니다 June 26, 2025 at 9:09 PM, 김지수PM(Gyuri)_FA : @fa please remove empty trays on C1CNV072 June 26, 2025 at 9:09 PM, 김지수PM(Gyuri)_FA : Manual change first June 26, 2025 at 9:11 PM, 김지수PM(Gyuri)_FA : Now I'm changing the destination of carriers June 26, 2025 at 9:11 PM, 김지수PM(Gyuri)_FA : @fa make agV not to unloading the full mag to C1CNV072 June 26, 2025 at 9:14 PM, 방혁 PM(Bang.Hyuk) FA : 저 조립가는중입니다. 현장으로 바로 갈게요 June 26, 2025 at 9:14 PM, duzzaman Md (MCS) : @FA Please check C1STKC71_C02 Port interface error. June 26, 2025 at 9:17 PM, 김지수PM(Gyuri)_FA : @Dariimaa/다리마/Ivancsa please remove the carrier on the P34 (MLA6158) June 26, 2025 at 9:19 PM, 김지수PM(Gyuri)_FA : @최명운(CHOI MYOUNGWOON) GF순환물류 음극에서 M04로 명령 걸테니, 캐리어좀 빼주심 감사하겠습니다. June 26, 2025 at 9:20 PM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B Can you check GF CA NC ROBOT2? June 26, 2025 at 9:20 PM, 방혁 PM(Bang.Hyuk) FA : ASAP June 26, 2025 at 9:21 PM, Yon Ko/연커/ : The error was caused by the crane stopping. If the issue had been with the conveyor, we would have been able to take action and fix it. Please ensure the root causes of errors are thoroughly understood before responding. June 26, 2025 at 9:25 PM, Szücs Géza FT-B : @F.A.briczius Gergő meg tudod nézni? June 26, 2025 at 9:34 PM, F.A.briczius Gergő : Megyek máris....közben az összes inverter a c71 raktár vd oldalon eldobta a powert és nem lehet rájuk visszaadni. June 26, 2025 at 9:38 PM, Debreczeni Ármin : @duzzaman Md (MCS) please share lot quantity June 26, 2025 at 9:42 PM, KIM SEYEON [김세연]_FA : @Szücs Géza FT-B please help GF assembly. June 26, 2025 at 9:44 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 26 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 41 • Cathode:33 GF NC reel Available : • AN: 78 • CA: 221 ///////////////////////////////////////// VD Unload request .Anode: 28 .Cathode: 13 Load request(Exist Jobs) .Anode:08 .Cathode:00 Load request waiting for materials: Anode:72 Cathode:92 June 26, 2025 at 9:46 PM, Debreczeni Ármin : Dear FA team can you tell us when st an conveyor is working again? June 26, 2025 at 9:56 PM, F.A.briczius Gergő : The cv is not in error. What is the problem? Magazine delivery? June 26, 2025 at 9:57 PM, Yon Ko/연커/ : There are no issues with the conveyor it is functioning normally. June 26, 2025 at 9:58 PM, Debreczeni Ármin : Yes line 3 almost empty June 26, 2025 at 9:58 PM, Sazzad Bhai SKon : We'll check stacking LR 3line June 26, 2025 at 10:01 PM, duzzaman Md (MCS) : There's LR for line 3 June 26, 2025 at 10:03 PM, duzzaman Md (MCS) : @FA Please check C1CNV071_12_016 Data missmatch error Thank you June 26, 2025 at 10:06 PM, duzzaman Md (MCS) : @Manufacturing Please check C1CNV072_M04 and remove 1+1 carriers from it. Thank you June 26, 2025 at 10:08 PM, duzzaman Md (MCS) : @FA C1STKC71_P14/15/16/17/19/20 INV-01 READY OFF CRANE 02, SCP MAIN POWER TRIP Please check June 26, 2025 at 10:10 PM, Diana : Hello. Problem with AGV don’t take an empty plate and don’t moving material on the 3 line. Can you solve this problem? Thank you June 26, 2025 at 10:12 PM, KIM SEYEON [김세연]_FA : @Dariimaa/다리마/Ivancsa please help June 26, 2025 at 10:18 PM, Dariimaa/다리마/Ivancsa : All AGVs are working without any problems. All are busy at the moment. June 26, 2025 at 10:30 PM, F.A.briczius Gergő : C1STKC71 problem solved. June 26, 2025 at 10:57 PM, 김지수PM(Gyuri)_FA : @fa Please check e0cnva51 Thanks June 26, 2025 at 11:05 PM, 전 운 (Jeon Woon) : 3Line Stack Station에 Full Plate 부족으로 Line 정지 됐습니다. 크레인 문제 및 ST C/V 정보 꼬임 등 이로 인한 UR, LR 지연으로 비가동입니다. @KIM SEYEON [김세연]_FA June 26, 2025 at 11:06 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. June 26, 2025 at 11:06 PM, KIM SEYEON [김세연]_FA : 지금 정상화 되었으니 좀 기다려주십시오. June 26, 2025 at 11:07 PM, 전 운 (Jeon Woon) : 1Line 동일한 Issue로 Line 정지 됐습니다. June 26, 2025 at 11:08 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. June 26, 2025 at 11:09 PM, 전 운 (Jeon Woon) : 최대한 버티다가 멈춘점 양해부탁드립니다. June 26, 2025 at 11:22 PM, Ngoc zia : @fa nc ca #robot 1 error June 26, 2025 at 11:24 PM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 37 • Cathode: 51 Pre STK > VD • Anode: 01 • Cathode: 00 Post STK > Stacking • Anode: 32 • Cathode:23 GF NC reel Available : • AN: 98 • CA: 215 ///////////////////////////////////////// VD Unload request .Anode: 28 .Cathode: 10 Load request(Exist Jobs) .Anode:36 .Cathode:02 Load request waiting for materials: Anode:76 Cathode:114 June 26, 2025 at 11:30 PM, duzzaman Md (MCS) : @FA C1STKC71 C01, C02 LIGHT CURTAIN DETECTED ERROR (SCS) please check. Thank you June 26, 2025 at 11:33 PM, Yon Ko/연커/ : @MCS NC CA AGV#04 is idle with material check this. Thank you. June 26, 2025 at 11:35 PM, Kovács Ágnes : Solved June 26, 2025 at 11:36 PM, duzzaman Md (MCS) : Job has been create. Thank you June 26, 2025 at 11:42 PM, 인제(Hwang) : NC An AGV#4 Error June 26, 2025 at 11:42 PM, Ngoc zia : @fa did u checking? June 26, 2025 at 11:49 PM, Dariimaa/다리마/Ivancsa : Solved June 27, 2025 at 12:13 AM June 27, 2025 at 12:13 AM, Debreczeni Ármin : As I see AGV's are working slow on stacking. Somehow can solve this problem? June 27, 2025 at 12:27 AM, duzzaman Md (MCS) : This message was deleted. June 27, 2025 at 12:29 AM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA can you check it please? June 27, 2025 at 12:37 AM, 전 운 (Jeon Woon) : GF AN ST AGV #1,6,10 3 AGV keep going around the station without a plate. I think I need to cancel the job. @FA @MCS June 27, 2025 at 12:38 AM, 전 운 (Jeon Woon) : Please hurry up checking @duzzaman Md (MCS) June 27, 2025 at 12:39 AM, duzzaman Md (MCS) : They don't have active job. @Acs please check June 27, 2025 at 12:40 AM, Szücs Géza FT-B : @김지수PM(Gyuri)_FA can u check this anomaly? June 27, 2025 at 12:41 AM, 방혁 PM(Bang.Hyuk) FA : Their orders were assigned June 27, 2025 at 12:42 AM, duzzaman Md (MCS) : Can you please provide me the carrier numbers? June 27, 2025 at 12:44 AM, 방혁 PM(Bang.Hyuk) FA : VC10 MLA1229 VC03 MLA1238 VC01 MLA1226 VC6 MLA2228 June 27, 2025 at 12:45 AM, duzzaman Md (MCS) : Should I delete the orders? June 27, 2025 at 12:47 AM, duzzaman Md (MCS) : From MCS side, these are fine. WE GOT HCACK 04 REPLY. Due to ACS issue, vehicle is getting assigned unassigned. June 27, 2025 at 12:51 AM, 방혁 PM(Bang.Hyuk) FA : @전 운 (Jeon Woon) 스택 명령 꼬인 AGV 해소되었습니다 June 27, 2025 at 12:52 AM, 전 운 (Jeon Woon) : 감사합니다. June 27, 2025 at 12:58 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 26 • Cathode: 71 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 45 • Cathode:27 GF NC reel Available : • AN: 136 • CA: 226 ///////////////////////////////////////// VD Unload request .Anode: 02 .Cathode: 06 Load request(Exist Jobs) .Anode:32 .Cathode:04 Load request waiting for materials: Anode:100 Cathode:118 June 27, 2025 at 1:00 AM, 방혁 PM(Bang.Hyuk) FA : @duzzaman Md (MCS) Please check the command status of C1CNV72 P30,31. There is no command. If you can't create a command, please send it back to the warehouse June 27, 2025 at 1:01 AM, 방혁 PM(Bang.Hyuk) FA : @전 운 (Jeon Woon) 일단 명령 변경으로 보낼수있는지 확인해보겠습니다 June 27, 2025 at 1:02 AM, 방혁 PM(Bang.Hyuk) FA : @전 운 (Jeon Woon) 지금 화물오지 않는 스테이션 LR 리셋 후에 LR다시 생성 해주실수있을까요??? June 27, 2025 at 1:10 AM, duzzaman Md (MCS) : For P31, P32 Transfer command is created. P30 is empty . Thank you June 27, 2025 at 1:17 AM, Lan Nhi : @FA Please check these 4 machines for me. For example, the goods are dry but AGV still does not accept to disassemble. 5-9 2-4 3-5 6-5 Thank you June 27, 2025 at 1:18 AM, Szücs Géza FT-B : @F.A.briczius Gergő @Kovács Ágnes LTA0066 M02-es porton van a rossz reel tálca, légyszives vegyétek ki sos-ben, ha leürítették. nagyon szépen köszönöm. Segítséget kérni ér! 💫🖖 June 27, 2025 at 1:20 AM, 전 운 (Jeon Woon) : 네 알겠습니다. June 27, 2025 at 1:21 AM, 전 운 (Jeon Woon) : 우선 Plate 안오는 Port reset 후 LR 다시 했습니다. @방혁 PM(Bang.Hyuk) FA June 27, 2025 at 1:22 AM, 방혁 PM(Bang.Hyuk) FA : 확인했습니다 June 27, 2025 at 1:33 AM, duzzaman Md (MCS) : @FA please check C1STKA71_P19/P20 LIGHT CURTAIN ERROR 01 ERROR June 27, 2025 at 1:44 AM, 김지수PM(Gyuri)_FA : @manufacturing Could you please raise the LR again > AN VD 5-7 p01 p02 June 27, 2025 at 1:47 AM, F.A.briczius Gergő : 6-5 Missing data in mcs (PLATE ID)[P03 MLA6072, ACS SHOWS DUP] 5-9 missing data (chamber has no mgz id only plate) and missing data in mcs (PLATE ID)[P01 MLA6069] 3-5 empty 2-4 missing data in mcs (PLATE ID)[P01 MLA6088] June 27, 2025 at 1:49 AM, F.A.briczius Gergő : Még rajta van a reel June 27, 2025 at 1:51 AM, 김지수PM(Gyuri)_FA : @Lan Nhi June 27, 2025 at 1:51 AM, Szücs Géza FT-B : várj picit légyszi June 27, 2025 at 1:53 AM, Szücs Géza FT-B : @Debreczeni Ármin LTA0066-os tálcáról, NC AN oldalon, a 2es Manuális portról le tudnád szedetni a reelt légyszives? a tálca rossz, folyton elakad, ki kell szednünk. Nagyon szépen köszönöm. June 27, 2025 at 1:55 AM, Debreczeni Ármin : @Lan Nhi remove this tray please told your logistics member June 27, 2025 at 2:13 AM, Lan Nhi : Yes Boss June 27, 2025 at 2:13 AM, duzzaman Md (MCS) : @FA Please check C1STKC71_P22, Its OOS. Thank you June 27, 2025 at 2:14 AM, Debreczeni Ármin : Agv's didnt take empty magazines from line 6 stacking June 27, 2025 at 2:18 AM, 방혁 PM(Bang.Hyuk) FA : Order assigned June 27, 2025 at 2:20 AM, Debreczeni Ármin : Thanks June 27, 2025 at 2:33 AM, Szücs Géza FT-B : köszönöm szépen June 27, 2025 at 2:45 AM, Ngoc zia : @rtd can u check vd ca 2-5,2-1,2-6,5-5 half of chamber June 27, 2025 at 2:58 AM, duzzaman Md (MCS) : VD CA 2-5: Full chamber.When the VD process is done, please raise UR. 2-1: Raise UR 2-6: have LR, no lot availa6 5-5: its full. When the VD process isWhen the VD process is done, please raise UR. June 27, 2025 at 2:59 AM, Debreczeni Ármin : @Ngoc zia share this with operators June 27, 2025 at 3:05 AM, Ngoc zia : Yes sir June 27, 2025 at 3:21 AM, duzzaman Md (MCS) : @FA please check C1STKC71_C02 PORT INTERFACE ERROR thank you June 27, 2025 at 3:23 AM, duzzaman Md (MCS) : Please check this as well. June 27, 2025 at 3:30 AM, Dariimaa/다리마/Ivancsa : @duzzaman Md (MCS) NC CA AGV#6 AGV#8 AGV#9 idle. Please check Thank you! June 27, 2025 at 3:30 AM, F.A.briczius Gergő : Done June 27, 2025 at 3:36 AM, duzzaman Md (MCS) : VC 06, there's existing job and all good from MCS VC08, transfer job initiated. VC09, transfer job initiated June 27, 2025 at 3:51 AM, Ngoc zia : Can u check 2-1 vd. Ca pls 3 plate inside chamber June 27, 2025 at 4:07 AM, duzzaman Md (MCS) : I've created job for P02 to the STK When its transferred l, please raise LR for P01 and P02 June 27, 2025 at 4:16 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 38 • Cathode: 62 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 01 • Cathode:00 GF NC reel Available : • AN: 192 • CA: 235 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 05 Load request(Exist Jobs) .Anode:06 .Cathode:44 Load request waiting for materials: Anode:50 Cathode:42 June 27, 2025 at 4:23 AM, duzzaman Md (MCS) : @FA please check C1STKC71_P02 Data loss ERROR thank you June 27, 2025 at 4:58 AM, duzzaman Md (MCS) : @FA Please check c1stkc72_p09 Data missmatch error Thank you June 27, 2025 at 4:58 AM, Debreczeni Ármin : Can you refresh please June 27, 2025 at 4:59 AM, Yon Ko/연커/ : Done June 27, 2025 at 5:02 AM, duzzaman Md (MCS) : GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 48 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:00 GF NC reel Available : • AN: 192 • CA: 225 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 03 Load request(Exist Jobs) .Anode:06 .Cathode:66 Load request waiting for materials: Anode:54 Cathode:30 June 27, 2025 at 5:39 AM, Zulaa/졸라/Ivancsa FA : @duzzaman Md (MCS) NC AN AGV#04 AGV#08 AGV#07 idle. Please check Thank you! June 27, 2025 at 5:40 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.27 Time: 06:00~ 18:00 1.Assy 이민재(Lee minjae) June 27, 2025 at 5:44 AM, duzzaman Md (MCS) : 4 and 8 is on charging and 7 is moving. Thank you June 27, 2025 at 5:56 AM, Debreczeni Ármin : Refresh please again June 27, 2025 at 5:57 AM, Mohammad Amir : Sure Checking June 27, 2025 at 6:01 AM, Mohammad Amir : Good morning everyone, GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 41 Pre STK > VD • Anode: 00 • Cathode: 03 Post STK > Stacking • Anode: 00 • Cathode:00 GF NC reel Available :- • AN: 210 • CA: 223 ///////////////////////////////////////// VD Unload request .Anode: 04 .Cathode: 00 Load request(Exist Jobs) .Anode:04 .Cathode:66 Load request waiting for materials: Anode:86 Cathode:14 Thank you very much! June 27, 2025 at 6:05 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Zsurbej Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Nagy Zsolt Modul(2): Nagy Gábor, Martina Dávid June 27, 2025 at 6:15 AM, 원재 : @FA Nc Ca #4 AGV check please June 27, 2025 at 6:27 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Good morning, Please check C1STKC72_P09 there is Data Mismatch error ,it is blocking one job. Thank you very much! June 27, 2025 at 6:53 AM, Jun(정우준)_SKOH FA : @Mohammad Amir can you check available lot?? June 27, 2025 at 6:53 AM, Mohammad Amir : Good morning Sir, Sure. June 27, 2025 at 6:55 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 43 • Cathode: 27 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 02 • Cathode:08 GF NC reel Available :- • AN: 199 • CA: 202 ///////////////////////////////////////// VD Unload request .Anode: 00 .Cathode: 12 Load request(Exist Jobs) .Anode:00 .Cathode:58 Load request waiting for materials: Anode:96 Cathode:18 Thank you very much! June 27, 2025 at 7:00 AM, Gua/ IvancsaFa : @mcs VD CA chamber 2-3 lower left side carrier is not flat. please send a AGV. June 27, 2025 at 7:01 AM, Mohammad Amir : Good morning, Should I send the carrier located in it to the STK? Thank you very much! June 27, 2025 at 7:07 AM, Gua/ IvancsaFa : good morning, it is going to dry. i mean the position is not flat June 27, 2025 at 7:07 AM, Mohammad Amir : Please contact ACS memebers in this case. Thank you very much! June 27, 2025 at 7:14 AM, Nguyen Huy : @MCS Good morning, VD CA 2-1 and 2-6 half chamber occurred, pls check June 27, 2025 at 7:14 AM, Mohammad Amir : Good morning,sure. June 27, 2025 at 7:17 AM, Mohammad Amir : Good morning, Issue has been resolved ✅ Now 2-1 VD CA has been filled and now it is full. For VD CA2-6 , please press LR for P01/P02. Thank you very much! June 27, 2025 at 7:21 AM, Nguyen Huy : 3-8 and 5-1 now have same problem, pls check for me too, thank you June 27, 2025 at 7:21 AM, Mohammad Amir : Sure, Checking! June 27, 2025 at 7:23 AM, Mohammad Amir : For, VD CA 3-8 issue has been resolved ✅ AGV#8 on the way with materials. Checking 5-1. Thank you very much! June 27, 2025 at 7:24 AM, Mohammad Amir : For VD CA 5-1, There is an active LR but unfortunately we don't have enough Materials as soon as material will be arrived it will go there as well. Thank you very much! June 27, 2025 at 7:42 AM, Mohammad Amir : Update :- Now VD CA 3-8 all chambers have filled ✅ Thank you very much! June 27, 2025 at 7:45 AM, Nguyen Huy : Pls keep an eye on this one and tell me when it's filled, thank you for your help June 27, 2025 at 7:45 AM, Mohammad Amir : Sure,I am monitoring. Thank you very much! June 27, 2025 at 7:54 AM, Gua/ IvancsaFa : @mcs hello, could you please delete the job of VD CA AGV#9. Chamber door is already closed. thank you June 27, 2025 at 7:55 AM, Mohammad Amir : Sure , Checking! June 27, 2025 at 7:57 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 27, 2025 at 8:07 AM, Mohammad Amir : @FA Please check CA NC RTV01 ,it is OOS and it is blocking reels delivery. Thank you very much! June 27, 2025 at 8:11 AM, Novák Károly F. A. : Solved June 27, 2025 at 8:11 AM, Mohammad Amir : Thank you very much! June 27, 2025 at 8:16 AM, Mohammad Amir : @Manufacturing Please check and confirm is there any carrier physically exists at VD AN 2-4 P01 and 3-7 P01 and 5-9 P01? Thank you very much! June 27, 2025 at 8:21 AM, Mohammad Amir : @Nguyen Huy Please check this issue. Thank you very much! June 27, 2025 at 8:25 AM, 이민재 : @MCS Please share the returnable materials. June 27, 2025 at 8:25 AM, Mohammad Amir : Sure Sir, Checking! June 27, 2025 at 8:28 AM, Mohammad Amir : GF Next lot quantity available Pre STK > Notching • Anode: 35 • Cathode: 31 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 17 • Cathode:00 GF NC reel Available :- • AN: 200 • CA: 206 ///////////////////////////////////////// VD Unload request .Anode: 12 .Cathode: 04 Load request(Exist Jobs) .Anode:12 .Cathode:46 Load request waiting for materials: Anode:84 Cathode:08 Thank you very much! June 27, 2025 at 8:33 AM, Nguyen Huy : 1 moment pls June 27, 2025 at 8:34 AM, Mohammad Amir : Sure, Thank you very much! June 27, 2025 at 8:34 AM, Nguyen Huy : @FA AGV #10 error near NC CA 4/3, pls check June 27, 2025 at 8:40 AM, Mohammad Amir : @FA Please check C1STKC72_P09 there is Data Mismatch error ,it is blocking VD CA AGV#10 job. Thank you very much! June 27, 2025 at 8:44 AM, Nguyen Huy : All confirmed June 27, 2025 at 8:44 AM, Mohammad Amir : Thank you very much for the confirmation. Please tell me Carrier ids as well. June 27, 2025 at 8:51 AM, Nguyen Huy : I just returned to NC side, I'll give the ID as soon as i can June 27, 2025 at 8:52 AM, Mohammad Amir : Sure, Thank you very much! June 27, 2025 at 8:55 AM, Mohammad Amir : For your information:- VD CA 5-1, AGV#1 on the way to fill the chamber full. ✅ Thank you very much! June 27, 2025 at 9:12 AM, Mohammad Amir : Update :- VD CA 5-1 has now filled with materials ✅. Thank you very much! June 27, 2025 at 9:14 AM, Mohammad Amir : @FA Please check Robot #2 CA ,there is light curtain-01 error and empty magazine delivery has slowed. Thank you very much! June 27, 2025 at 9:18 AM, 김동섭 : CA VD ROOM AGV#1 ERROR June 27, 2025 at 9:27 AM, 김동섭 : CA VD 5-1 플레이트 반송 부탁드립니다 June 27, 2025 at 9:31 AM, Mohammad Amir : Dear @Jun(정우준)_SKOH FA Sir, GF Next lot quantity available Pre STK > Notching • Anode: 39 • Cathode: 29 Pre STK > VD • Anode: 01 • Cathode: 10 Post STK > Stacking • Anode: 19 • Cathode:03 GF NC reel Available :- • AN: 203 • CA: 200 ///////////////////////////////////////// VD(UD/LD/Wait/All)(Cathode ): (10/32/4/50) VD(UD/LD/Wait/All)(Anode): (4/4/96/104) Thank you very much! June 27, 2025 at 9:33 AM, Mohammad Amir : Dear Sir, You would like me to send the materials located in VD CA 5-1 to warehouse? Thank you very much! June 27, 2025 at 9:33 AM, 김동섭 : 네 June 27, 2025 at 9:34 AM, Mohammad Amir : Sure Sir, Working on it. June 27, 2025 at 9:38 AM, Mohammad Amir : Dear Sir, I have sent all the materials located in VD CA 5-1 back to warehouse ✅. AGV#3 and #2 have been assigned successfully. Thank you very much! June 27, 2025 at 9:40 AM, 김동섭 : P1, P2 도 반송 부탁드립니다 June 27, 2025 at 9:43 AM, Mohammad Amir : Jobs have been created successfully as well for P01/02 ✅. Thank you very much! June 27, 2025 at 9:43 AM, 김동섭 : Ca VD ROOM AGV #9 ERROR June 27, 2025 at 9:43 AM, 김동섭 : 감사합니다 June 27, 2025 at 9:44 AM, Mohammad Amir : You are welcome! June 27, 2025 at 9:58 AM, 김동섭 : Ca VD 5-1 AGV #7 STOP June 27, 2025 at 10:04 AM, Mohammad Amir : Sir, Update: VD CA 5-1 has been successfully unloaded ✅. Thank you very much! June 27, 2025 at 10:04 AM, 김동섭 : 감사합니다 June 27, 2025 at 10:05 AM, Mohammad Amir : You are welcome! June 27, 2025 at 10:33 AM, Mohammad Amir : @FA Please check C1STKA72_P11/12/07/08 are OOs because of light curtain error and it is blocking materials delivery. Thank you very much! June 27, 2025 at 10:38 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. C1STKA71 (4 plates) C1STKA72 (7 plates) C1STKC71 (1 plate) June 27, 2025 at 10:40 AM, Sazzad Bhai SKon : @manufacturing There are 80+ carriers in hold state. (Pre VD STK and post VD STK) Please check them June 27, 2025 at 10:44 AM, Sazzad Bhai SKon : @FA All of the magazines of this plate is duplicated. MLA6076 (C1STKA72, 0105502): MA5140, 2472, 2279, 1315, 6551, 3280 June 27, 2025 at 10:50 AM, Novák Károly F. A. : Korean technicians working on these ports June 27, 2025 at 10:50 AM, Mohammad Amir : Thank you very much for the confirmation! June 27, 2025 at 10:51 AM, Novák Károly F. A. : You're welcome. June 27, 2025 at 11:09 AM, Mohammad Amir : @FA Please check E0CNVC52_RTV01 there is Run Time over error and Reels delivery has stopped. Thank you very much! June 27, 2025 at 11:17 AM, Novák Károly F. A. : Checking June 27, 2025 at 11:23 AM, Novák Károly F. A. : Done June 27, 2025 at 11:24 AM, Mohammad Amir : Thank you very much! June 27, 2025 at 12:22 PM, Zsurbej Zsolt F.A. : @(MCS) Hello! C0PVC020_P13 is empty. Please delete MC5150 from there. Thank you very much! June 27, 2025 at 12:23 PM, Mohammad Amir : Hello, Information has been updated in MCS RTD database successfully ✅. Thank you very much! June 27, 2025 at 12:35 PM, Mohammad Amir : @FA Please check C1STKC71_C02 there is Load Oversize error. Thank you very much! June 27, 2025 at 12:39 PM, Mohammad Amir : This message was deleted. June 27, 2025 at 12:39 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 23 • Cathode: 14 Pre STK > VD • Anode: 02 • Cathode: 00 Post STK > Stacking • Anode: 06 • Cathode:18 GF NC reel Available :- • AN: 239 • CA: 224 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (14/38/4/4/120) VD(UD/LD/Wait/OOS/Drying)(Anode): (06/30/60/12/104) Thank you very much! June 27, 2025 at 1:04 PM, Novák Károly F. A. : Working again. June 27, 2025 at 1:04 PM, Mohammad Amir : Thank you very much! June 27, 2025 at 1:04 PM, 박시우 : @FA Please check NC agv #5 June 27, 2025 at 1:07 PM, 박시우 : NC AN AGV #5 June 27, 2025 at 1:08 PM, Mohammad Amir : @Manufacturing Please check and confirm is there any carrier physically exists at VD AN 2-4 P01 and 5-9 P01? Thank you very much! June 27, 2025 at 1:51 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check MLC3225 carrier located at C1 NV072_P18 ,it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check the issue physically on priority. Thank you very much! June 27, 2025 at 1:58 PM, Ivan Kasian Sl 5L 🥹 : @fa please check cv010 st Tray data missmatch error June 27, 2025 at 1:58 PM, Ivan Kasian Sl 5L 🥹 : Thank you so much June 27, 2025 at 2:05 PM, Novák Károly F. A. : Solved June 27, 2025 at 2:06 PM, Ivan Kasian Sl 5L 🥹 : Thank you June 27, 2025 at 2:09 PM, Ivan Kasian Sl 5L 🥹 : Sorry, but now again same problem June 27, 2025 at 2:10 PM, Ivan Kasian Sl 5L 🥹 : @Novák Károly F. A. June 27, 2025 at 2:13 PM, 원재 : @FA NC An There is a delay in the full magazine ejection on Lines 4, 5, and 6. Is it possible to adjust the priority? June 27, 2025 at 2:14 PM, Mohammad Amir : Sure Checking! June 27, 2025 at 2:24 PM, 박강민 : GF AN VD 1-4 좌측플레이트 상부 안착불량 입니다. AGV로 재안착 부탁드립니다. June 27, 2025 at 2:31 PM, Mohammad Amir : Hello, Apologies for the delay,I was busy with other tasks as well. I have resolved the issue ✅. And AGV#6 has already been assigned to 5-2. AGV#7 to 5-1. AGV#5 to 6-1. Others are waiting fo AGVs. I am monitoring. Thank you very much! June 27, 2025 at 2:41 PM, 이한웅(삼구) : please check NC Ca #10 AGV June 27, 2025 at 2:52 PM, 원재 : Ok thank you June 27, 2025 at 2:52 PM, Mohammad Amir : You are welcome! June 27, 2025 at 3:01 PM, 이한웅(삼구) : NC Ca RTV 확인 부탁드립니다. June 27, 2025 at 3:12 PM, 김동섭 : AN VD 3-3앞 AGV #3 ERROR STOP June 27, 2025 at 3:23 PM, 박강민 : CA VD 5-7 앞 AGV #2 ERROR STOP June 27, 2025 at 3:43 PM, 심재훈 : Could you share this information June 27, 2025 at 3:43 PM, Mohammad Amir : Sure ! June 27, 2025 at 3:44 PM, JAEYOON KIM / CS invited 윤한수 and jung soonhak정순학. June 27, 2025 at 3:47 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 09 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 06 • Cathode:42 GF NC reel Available :- • AN: 251 • CA: 185 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (08/56/20/4/96) VD(UD/LD/Wait/OOS/Drying)(Anode): (00/08/39/08/144) Thank you very much! June 27, 2025 at 3:51 PM, jung soonhak정순학 invited Park Minho(박민호)_CS, Doohan Jang [장두한]_기구, shinyunhyun/제어/시너스텍, SungKwun/(조성관)/AGV, RYUKYUNGMIN(류경민)_AGV, HONG SUK DO[홍석도] 제어, 김용성 and JU YOUNG(정주영) / AGV. June 27, 2025 at 4:10 PM, 원재 : Please check NC Ca Agv#4 June 27, 2025 at 4:20 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 08 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:47 GF NC reel Available :- • AN: 254 • CA: 190 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (04/52/16/4/100) VD(UD/LD/Wait/OOS/Drying)(Anode): (00/16/25/08/136) Thank you very much! June 27, 2025 at 4:32 PM, 박강민 : GF CA VD 5-5 우측플레이트 하부 안착불량 입니다. AGV로 재안착 부탁드립니다. June 27, 2025 at 5:30 PM, Jun(정우준)_SKOH FA : can you check this again June 27, 2025 at 5:30 PM, Mohammad Amir : Sure Sir Checking June 27, 2025 at 5:32 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 02 Post STK > Stacking • Anode: 16 • Cathode:62 GF NC reel Available :- • AN: 262 • CA: 174 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (02/24/16/4/136) VD(UD/LD/Wait/OOS/Drying)(Anode): (08/12/16/08/132) Thank you very much! June 27, 2025 at 5:56 PM, KIM SEYEON [김세연]_FA : @dear assembly shift leader please check where is FA operator from assembly? June 27, 2025 at 5:57 PM, KIM SEYEON [김세연]_FA : Photo June 27, 2025 at 5:57 PM, KIM SEYEON [김세연]_FA : I want to meet them and train them what is their work. June 27, 2025 at 5:58 PM, Kateryna SSL C : @Petrovics Attila June 27, 2025 at 5:59 PM, KIM SEYEON [김세연]_FA : let's meet at GF NC AN auto slide door. @Petrovics Attila June 27, 2025 at 6:01 PM, Viki - SL_C : Jenő is already on his way June 27, 2025 at 6:08 PM, Dariimaa/다리마/Ivancsa : @MCS good evening VD AN 2-7 chamber empty. Please delete the AGV#04 job. Thank you! June 27, 2025 at 6:11 PM, VK (mcs) : Do you know where is the MLA0217? June 27, 2025 at 6:12 PM, KIM SEYEON [김세연]_FA : @Viki - SL_C please come to GF NC AN June 27, 2025 at 6:12 PM, KIM SEYEON [김세연]_FA : I am waiting June 27, 2025 at 6:13 PM, Viki - SL_C : Omw June 27, 2025 at 6:15 PM, KIM SEYEON [김세연]_FA : @Viki - SL_C What is omw mean? please send two FA operator at GF NC AN. June 27, 2025 at 6:16 PM, KIM SEYEON [김세연]_FA : I don't know where they are. June 27, 2025 at 6:18 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 Carrier on RTV is not unloading in buffer port 10 for a while. June 27, 2025 at 7:04 PM, Jun(정우준)_SKOH FA : @VK (mcs) can you check available lot? June 27, 2025 at 7:09 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 01 Post STK > Stacking • Anode: 00 • Cathode:16 GF NC reel Available :- • AN: 232 • CA: 172 ///////////////////////////////////////// VD Unload request .Anode: 28 .Cathode: 16 Load request(Exist Jobs) .Anode:20 .Cathode:22 Load request waiting for materials: Anode:39 Cathode:16 June 27, 2025 at 7:18 PM, Jun(정우준)_SKOH FA : @VK (mcs) can you follow this format?? and can you inform to next mcs worker?? thanks June 27, 2025 at 7:19 PM, VK (mcs) : Sure we will do it. June 27, 2025 at 7:24 PM, Baek Hojong(백호종)FA : Night shift FA Schedule Date: 2025.06.27 Time:18:00~06:00 FA 백호종 (Baek Hojong) GF Assy Ca 최명운 (CHOI Myoungwoon) GF Assy An 김정희 (Kim jeong hul) June 27, 2025 at 7:40 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 00 • Cathode: 00 Pre STK > VD • Anode: 03 • Cathode: 00 Post STK > Stacking • Anode: 03 • Cathode:24 GF NC reel Available :- • AN: 233 • CA: 179 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (08/16/12/4/128) VD(UD/LD/Wait/OOS/Drying) (Anode): (09/22/56/12/104) Thank you very much! June 27, 2025 at 8:15 PM, 김현태 : NC CA AGV #2 error Thanks June 27, 2025 at 8:45 PM, VK (mcs) : @FA Please check Cathode Pre-STK C71-port 12(8081) It’s out of service. June 27, 2025 at 8:55 PM, Pavel : @FA Please check the AGV station which is opposite 2/8, the anode material has not been delivered for 2 hours June 27, 2025 at 9:03 PM, Dariimaa/다리마/Ivancsa : @MCS please check. June 27, 2025 at 9:05 PM, VK (mcs) : Can you please tell me which area? June 27, 2025 at 9:05 PM, Pavel : This message was deleted. June 27, 2025 at 9:06 PM, Pavel : ST 2 L 8 opposite machine 8 AN June 27, 2025 at 9:08 PM, VK (mcs) : Anode materials are insufficient. June 27, 2025 at 9:14 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 04 • Cathode: 02 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 00 • Cathode:20 GF NC reel Available :- • AN: 215 • CA: 164 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (06/08/36/04/128) VD(UD/LD/Wait/OOS/Drying) (Anode): (02/0668/08/120) June 27, 2025 at 9:14 PM, Pavel : Got it, thank you June 27, 2025 at 9:49 PM, 최명운(CHOI MYOUNGWOON) : @MCS GF NC Ca 1_010-P03 has an empty magazine. P04 does not have an empty magazine, but it is incorrectly marked as having one in ACS. That is why AGV#4 error keeps occurring. June 27, 2025 at 9:49 PM, VK (mcs) : Checking June 27, 2025 at 9:52 PM, VK (mcs) : We received LR for port 3 Would you want me to cancel the job and clear LR? June 27, 2025 at 9:58 PM, 최명운(CHOI MYOUNGWOON) : P03 is now empty. LR should be maintained. June 27, 2025 at 10:01 PM, Hữu Thắng : @MCS Could you please check UR VD AN 2/4 ~ VD 4/7 . Thank you June 27, 2025 at 10:06 PM, VK (mcs) : VD anode 2/4 UR received but reply for port 1 is carrier location mismatched. MLA6088 according to MCS is in anode Post-STK A72 Please adjust carrier ID and apply UR again VD anode 4/7 Has same issue. Carrier in Port 2 has mismatch location error. MLA6010 is located in Pre-STKA71 Please adjust ID and apply UR. Thx June 27, 2025 at 10:09 PM, Hữu Thắng : @FA Could you please send manual to KA72 . Then i will send technician to check the chamber. Thank you June 27, 2025 at 11:11 PM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 12 • Cathode: 07 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 10 • Cathode:33 GF NC reel Available :- • AN: 210 • CA: 169 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (00/06/2/12/116) VD(UD/LD/Wait/OOS/Drying) (Anode): (08/04/66/08/124) June 28, 2025 at 2:12 AM June 28, 2025 at 2:12 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 24 • Cathode:66 GF NC reel Available :- • AN: 214 • CA: 152 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (00/02/60/04/116) VD(UD/LD/Wait/OOS/Drying) (Anode): (08/08/89/12/108) June 28, 2025 at 2:23 AM, Hữu Thắng : @MCS Could you please check status VD AN 6/6 . Thanks June 28, 2025 at 2:42 AM, VK (mcs) : After material loaded on the machine, status was changed to 1 Drying process is not started yet. Please change status to 2. June 28, 2025 at 3:33 AM, VK (mcs) : @FA Please check Anode Post STK A72 -C02 Inactive stop. June 28, 2025 at 3:44 AM, VK (mcs) : This message was deleted. June 28, 2025 at 3:55 AM, Jun(정우준)_SKOH FA : @VK (mcs) can you check available lot? June 28, 2025 at 3:56 AM, VK (mcs) : @FA Please check Cathode Pre-STK C71 -C02 Load over size error. June 28, 2025 at 4:01 AM, VK (mcs) : GF Next lot quantity available Pre STK > Notching • Anode: 11 • Cathode: 00 Pre STK > VD • Anode: 01 • Cathode: 03 Post STK > Stacking • Anode: 40 • Cathode:58 GF NC reel Available :- • AN: 218 • CA: 144 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (02/04/64/04/116) VD(UD/LD/Wait/OOS/Drying) (Anode): (00 /04/75/08/112) June 28, 2025 at 4:02 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) ST AN AGV#10 idle. Please check Thank you! June 28, 2025 at 4:04 AM, VK (mcs) : Done June 28, 2025 at 5:07 AM, QuangPhan : @MCS VD 2-4 #13 Please check LR half chamber. Thanks June 28, 2025 at 5:07 AM, QuangPhan : Anode June 28, 2025 at 5:10 AM, VK (mcs) : LR received at 4:07 Material will transfer , when they are available. June 28, 2025 at 5:23 AM, Hữu Thắng : As we checked the machine . We couldn’t change status due to the machine has an error. Can you please transfer these magazines to KA72 . Thanks June 28, 2025 at 5:26 AM, VK (mcs) : Machine is out of service now, it is possible only by ACS order. @Jun(정우준)_SKOH FA Can you please transfer to Post-STK June 28, 2025 at 5:38 AM, 김현태 : NC CA AGV #9 error Thanks June 28, 2025 at 5:39 AM, Baek Hojong(백호종)FA : ACS Manual 72 sent to warehouse June 28, 2025 at 5:41 AM, Zaya/ivancsa FA : Chamber is empty now June 28, 2025 at 5:44 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available Pre STK > Notching • Anode: 13 • Cathode: 00 Pre STK > VD • Anode: 00 • Cathode: 00 Post STK > Stacking • Anode: 43 • Cathode:103 GF NC reel Available :- • AN: 237 • CA: 137 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (00/08/68/04/96) VD(UD/LD/Wait/OOS/Drying) (Anode): (02 /06/76/08/116) Thank you very much! June 28, 2025 at 5:44 AM, Mohammad Amir : Thank you very much! June 28, 2025 at 5:57 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(5): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor June 28, 2025 at 6:20 AM, Ngoc zia : @rtd can u reset the password RTD id “ TEMP” pls. Someone enter wrong more than 5 times June 28, 2025 at 6:22 AM, Mohammad Amir : Good morning, Password has been restted successfully ✅. Please use "1234" to login and set new password. Feel free to inform me if you face further issues. Thank you very much! June 28, 2025 at 6:23 AM, Mohammad Amir : @FA @Novák Károly F. A. Good morning, Please check C1STKC71_C02 there is Fork#1 Load Position Error when Active. Thank you very much! June 28, 2025 at 6:24 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Good morning, Please check C1STKC72_P13 there is Data Mismatch error and several jobs are pending. Thank you very much! June 28, 2025 at 6:26 AM, Ngoc zia : Thank you June 28, 2025 at 6:26 AM, Mohammad Amir : You are most welcome! June 28, 2025 at 6:32 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please also check E0STKC51_C01 there is MCP AP error. Thank you very much! June 28, 2025 at 6:38 AM, Ngoc zia : Nc An 3.3 agv1 error June 28, 2025 at 6:41 AM, Mohammad Amir : @FA Please check C1CNV072_16_126 there is Data Mismatch error and it blocking stacking materials delivery. Thank you very much! June 28, 2025 at 7:10 AM, Jun(정우준)_SKOH FA : @ASSAY Anyone who manually transferred full magazine from pre stk, please take full magazine. June 28, 2025 at 7:19 AM, Jun(정우준)_SKOH FA : @Ngoc zia can you check it? June 28, 2025 at 7:25 AM, Ngoc zia : I will check soon June 28, 2025 at 7:35 AM, Jun(정우준)_SKOH FA : @Mohammad Amir can you check available lot?? June 28, 2025 at 7:36 AM, Mohammad Amir : Good morning Sir, Checking! June 28, 2025 at 7:37 AM, Ngoc zia : Nc an 4.2 #agv3 error June 28, 2025 at 7:41 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 17 • Cathode: 04 Pre STK > VD • Anode: 02 • Cathode: 02 Post STK > Stacking • Anode: 55 • Cathode:120 GF NC reel Available :- • AN: 228 • CA: 127 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (08/00/84/04/92) VD(UD/LD/Wait/OOS/Drying) (Anode): (09/06/78/08/108) Thank you very much! June 28, 2025 at 7:43 AM, Szabolcs : @Mohammad Amir Gf nc Robot 3, We took out the tray because it was damaged. MLA1148 June 28, 2025 at 7:44 AM, Mohammad Amir : Good morning, Data has been updated successfully in MCS/RTD database ✅. Thank you very much! June 28, 2025 at 8:20 AM, Mohammad Amir : This message was deleted. June 28, 2025 at 8:29 AM, Mohammad Amir : @Manufacturing Please press LR for VD AN 2-4 ,P03/04 as there is half chamber situation because we received unload complete report for these ports after LR. Thank you very much! June 28, 2025 at 8:36 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA51_C01 there is Workable double storage error. Thank you very much! June 28, 2025 at 8:41 AM, Szabolcs : Done June 28, 2025 at 8:41 AM, Mohammad Amir : Thank you very much 🙏 June 28, 2025 at 9:05 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching • Anode: 14 • Cathode: 04 Pre STK > VD • Anode: 00 • Cathode: 01 Post STK > Stacking • Anode: 45 • Cathode:113 GF NC reel Available :- • AN: 225 • CA: 130 ///////////////////////////////////////// VD(UD/LD/Wait/OOS/Drying)(Cathode ): (04/06/80/04/92) VD(UD/LD/Wait/OOS/Drying) (Anode): (09/07/81/08/104) Thank you very much! June 28, 2025 at 9:08 AM, 심재훈 : Looks like it's stable now. June 28, 2025 at 9:09 AM, Gua/ IvancsaFa : @mcs good morning please delete the job of VD AN AGV#1. the chamber is empty June 28, 2025 at 9:09 AM, Mohammad Amir : Good morning, Sure , Checking! June 28, 2025 at 9:18 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 28, 2025 at 9:20 AM, Mohammad Amir : @Gua/ IvancsaFa Please check AN VD AGV#7 it is in error and blocking AGVs. Thank you very much! June 28, 2025 at 9:22 AM, Gua/ IvancsaFa : could you delete the job of agv#7. chamber is empty June 28, 2025 at 9:22 AM, Mohammad Amir : Sure , checking! June 28, 2025 at 9:24 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 28, 2025 at 9:32 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C01 there is ready off during Forking error. Thank you very much! June 28, 2025 at 9:39 AM, Mohammad Amir : @FA @Novák Károly F. A. Please check C1STKA71_C01/C02 there is light curtain error and it has blocked empty magazine delivery. Thank you very much! June 28, 2025 at 9:52 AM, Gua/ IvancsaFa : @mcs could you delete the job of VD AN AGV#4. the chamber is empty. thank you June 28, 2025 at 9:52 AM, Mohammad Amir : Sure , Checking! June 28, 2025 at 9:54 AM, Mohammad Amir : Jobs have been cancelled successfully ✅. Thank you very much! June 28, 2025 at 9:56 AM, Mohammad Amir : @Gua/ IvancsaFa Could you please confirm me VD AN 1-4 P01 ,is there any material exists or is it Empty physically? Thank you very much! June 28, 2025 at 10:02 AM, Gua/ IvancsaFa : there is no material in there June 28, 2025 at 10:02 AM, Mohammad Amir : Thank you very much for the confirmation! June 28, 2025 at 10:03 AM, Mohammad Amir : @Gua/ IvancsaFa Now issue has been resolved completely. Now AGV will not come to pick materials from empty chamber ✅ Please feel free to contact me if you face any further issues. Thank you very much! June 28, 2025 at 10:06 AM, Gua/ IvancsaFa : thank you so much June 28, 2025 at 10:06 AM, Mohammad Amir : You are welcome! June 28, 2025 at 10:14 AM, Gua/ IvancsaFa : could you check VD AN AGV#3. it is idle but it has a one material id is UNK. June 28, 2025 at 10:15 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKC51_P02 and E0CNVC52_09_12 data loss error. Because of this there is shortages of CA reels , Please check the issue on priority. Thank you very much! June 28, 2025 at 10:15 AM, Mohammad Amir : Sure, Checking! June 28, 2025 at 10:16 AM, Mohammad Amir : I have resolved the issue successfully ✅. Now VD AN AGV#3 has started to move. Thank you very much! June 28, 2025 at 10:24 AM, Gua/ IvancsaFa : @mcs could you delete command of VD CA AGV#9. the chamber’s door is already closed. thank you June 28, 2025 at 10:24 AM, Mohammad Amir : @Manufacturing Please check and remove 1+3 from C1CNV072_M04 it is decreasing stacking materials delivery speed. Thank you very much! June 28, 2025 at 10:24 AM, Mohammad Amir : Sure, Checking! June 28, 2025 at 10:25 AM, Gua/ IvancsaFa : I think the chamber door stucked June 28, 2025 at 10:26 AM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! June 28, 2025 at 10:30 AM, Mohammad Amir : @FA Please check this issue on priority as there is almost no CA reels available for production. Thank you very much! June 28, 2025 at 10:48 AM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching:- • Anode: 02 • Cathode: 00 Pre STK > VD:- • Anode: 03 • Cathode: 00 Post STK > Stacking:- • Anode: 41 • Cathode:115 GF NC reel Available :- • AN: 221 • CA: 123 ///////////////////////////////////////// VD:- Cathode :- (UD/LD/Wait/OOS/Drying) (06/06/68/04/104) Anode:- (UD/LD/Wait/OOS/Drying) (07/14/73/08/100) Thank you very much! June 28, 2025 at 11:04 AM, Ngoc zia : @fa can u come l6 warehousing An pls. Carrier stuck can’t move June 28, 2025 at 11:13 AM, Mohammad Amir : @FA Please check CA NC RTV01 again,it is OOS and reels delivery has stopped. Thank you very much! June 28, 2025 at 11:15 AM, Szabolcs : Done June 28, 2025 at 11:15 AM, Mohammad Amir : Thank you very much! June 28, 2025 at 11:26 AM, 카스텔 발라지 F.A. : @Mohammad Amir Hello! Please check the AN RTV manual ports. The system does not generate orders for the empty carriers. There are still empty carriers at M06 and M07, the others have already been sent by me. The full carriers are coming from the warehouse. June 28, 2025 at 11:27 AM, Mohammad Amir : Sure , Checking! June 28, 2025 at 11:33 AM, Mohammad Amir : This message was deleted. June 28, 2025 at 11:34 AM, Mohammad Amir : Hello Balazs, All the O/P ports of the STKA51/52 which transfers the empty trays to Slitter is in Manual mode. Could you please check has someone intentionally stopped the empty trays delivery,is there some maintenance? Please confirm,after confirmation I will proceed with resolving this issue. Thank you very much! June 28, 2025 at 11:37 AM, Mohammad Amir : The reason is that the automatic jobs for empty trays from NC AN CNV Manual ports (M06/07) is created to destination Slitter CNV_P07 that's why I need confirmation afterwards I proceed to resolve it. Thank you very much! June 28, 2025 at 11:38 AM, 카스텔 발라지 F.A. : I don't know who's pausing the ports in front of the warehouses. I'll check June 28, 2025 at 11:38 AM, Mohammad Amir : Thank you very much! June 28, 2025 at 11:42 AM, Szabolcs : An RTV under repair June 28, 2025 at 11:47 AM, Mohammad Amir : Issue has been resolved ✅. Now trays will return . Thank you very much! June 28, 2025 at 12:09 PM, Mohammad Amir : @카스텔 발라지 F.A. Please check E0CNVA52 _07_039/40 there is Data loss error now it is stopping empty trays recovery. Thank you very much! June 28, 2025 at 12:59 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching:- • Anode: 03 • Cathode: 00 Pre STK > VD:- • Anode: 01 • Cathode: 02 Post STK > Stacking:- • Anode: 48 • Cathode:117 GF NC reel Available :- • AN: 207 • CA: 136 ///////////////////////////////////////// VD:- Cathode :- (UD/LD/Wait/OOS/Drying) (06/04/72/04/100) Anode:- (UD/LD/Wait/OOS/Drying) (00/06/63/08/104) Thank you very much! June 28, 2025 at 1:36 PM, 원재 : @FA Please check NC Ca #10 Agv stop June 28, 2025 at 1:50 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check CA NC RTV01 it is OOS. Thank you very much! June 28, 2025 at 2:38 PM, 원재 : @FA Please check NC Ca #9 Agv stop June 28, 2025 at 2:40 PM, Nguyen Huy : @Mohammad Amir hello, could you pls check why AGV didn't take out materials from chamber 2-2 VD CA? It's been waiting there since 13:10pm June 28, 2025 at 2:41 PM, Mohammad Amir : Sure, Checking! June 28, 2025 at 2:41 PM, Nguyen Huy : Operator have pressed UR and the mode was auto also June 28, 2025 at 2:49 PM, Mohammad Amir : Please press UR again. Last UR received at 10:38 successfully but these jobs were cancelled on the request of operations. Thank you very much! June 28, 2025 at 2:51 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check CA Robot #3 (8027) there is Data loss error and several jobs are pending. Thank you very much! June 28, 2025 at 2:51 PM, 카스텔 발라지 F.A. : I'm on the way June 28, 2025 at 2:54 PM, Mohammad Amir : @Novák Károly F. A. Please check E0STKC51_C01 there is ready off during Forking error and it is affecting Reels delivery. Thank you very much! June 28, 2025 at 2:55 PM, Nguyen Huy : Can you check if UR was created now ? June 28, 2025 at 2:56 PM, Mohammad Amir : Unfortunately still no UR. Please try again. Thank you very much! June 28, 2025 at 2:57 PM, 카스텔 발라지 F.A. : Solved June 28, 2025 at 2:58 PM, Mohammad Amir : Thank you very much 🙏 June 28, 2025 at 2:59 PM, Mohammad Amir : Dear @All, GF Next lot quantity available Pre STK > Notching:- • Anode: 00 • Cathode: 00 Pre STK > VD:- • Anode: 02 • Cathode: 03 Post STK > Stacking:- • Anode: 49 • Cathode:134 GF NC reel Available :- • AN: 204 • CA: 119 ///////////////////////////////////////// VD:- Cathode :- (UD/LD/Wait/OOS/Drying) (08/02/84/04/88) Anode:- (UD/LD/Wait/OOS/Drying) (08/04/56/08/108) Thank you very much! June 28, 2025 at 3:01 PM, Mohammad Amir : This message was deleted. June 28, 2025 at 3:02 PM, Mohammad Amir : @FA @Novák Károly F. A. Please check AN NC Robot #1 there is Data Mismatch error on 5093 and it is blocking empty magazine delivery. Thank you very much n June 28, 2025 at 3:11 PM, 카스텔 발라지 F.A. : Solved June 28, 2025 at 3:12 PM, Mohammad Amir : Thank you very much 🙏 June 28, 2025 at 3:28 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check C1CNV072_16_087/85 these ports are Manual mode and it is blocking stacking materials delivery. Thank you very much! June 28, 2025 at 5:13 PM, Mohammad Amir : This message was deleted. June 28, 2025 at 5:13 PM, Mohammad Amir : This message was deleted. June 28, 2025 at 5:17 PM, Mohammad Amir : This message was deleted. June 28, 2025 at 5:24 PM, Mohammad Amir : GF Next lot quantity available GF NC reel Available :- • AN: 200, CA: 89 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 01 Post STK > Stacking:- • An: 72, Ca:150 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 04/76/04/110/04 VD AN (UD/Drying/LD/Wait/OOS) 11/100/04/80/08) ST CA(LD/UD/wating) 01/04/00 ST AN(LD/UD/wating) 07/02/03 Thank you very much! June 28, 2025 at 5:25 PM, Mohammad Amir : @Jun(정우준)_SKOH FA Sir, Please check this as you requested. Thank you very much! June 28, 2025 at 5:27 PM, Jun(정우준)_SKOH FA : thank you so much. June 28, 2025 at 5:27 PM, Mohammad Amir : You are welcome! June 28, 2025 at 5:49 PM, 이한웅(삼구) : @Jun(정우준)_SKOH FA PM님 후창고에 다시 엠티 매거진 보관 중인데 확인 부탁드립니다. June 28, 2025 at 5:53 PM, Jun(정우준)_SKOH FA : 네, 양극 후창고에 공매거진 2개 반송 안되는 사유 확인 해볼게요. June 28, 2025 at 6:01 PM, 이한웅(삼구) : 넵 감사합니다 June 28, 2025 at 6:05 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 28, 2025 at 6:24 PM, Baek Hojong(백호종)FA : Night shift FA Schedule Date: 2025.06.28 Time:18:00~06:00 FA 백호종 (Baek Hojong) GF Assy Ca 최명운 (CHOI Myoungwoon) GF Assy An 김정희 (Kim jeong hul) June 28, 2025 at 6:34 PM, 김정희(Jeong hee FA) : There is problem with magazines at Anode VD 1-1 June 28, 2025 at 7:02 PM, Lan Nhi : @FA Hello. Please check and refill the chamber for the 2-4 VD/AN machine. Thank you. June 28, 2025 at 7:02 PM, Dariimaa/다리마/Ivancsa : @MCS please check. Thank you! June 28, 2025 at 7:06 PM, Lan Nhi : @FA #1 1-1 #34 4-7 #41 5-5 channel tray error #06 1-6 code not received error thanks June 28, 2025 at 7:06 PM, VK (mcs) : Load request received several times, please wait till material available. They will transfer when are available. June 28, 2025 at 7:07 PM, Lan Nhi : Thank you June 28, 2025 at 7:15 PM, Dariimaa/다리마/Ivancsa : Chamber 1-6 please check. June 28, 2025 at 7:26 PM, Dariimaa/다리마/Ivancsa : Solved June 28, 2025 at 7:49 PM, 김현태 : This message was deleted. June 28, 2025 at 7:49 PM, 김현태 : NC CA AGV #10 error thanks June 28, 2025 at 7:51 PM, Lan Nhi : Thank you June 28, 2025 at 8:11 PM, Lan Nhi : @FA Example/ Machine 4-6 and 1-7 have pallet channel error. Please help me check. June 28, 2025 at 8:13 PM, Dariimaa/다리마/Ivancsa : AN CA ?? June 28, 2025 at 8:21 PM, Lan Nhi : AN June 28, 2025 at 8:22 PM, FACS_Bareum kim left this chatroom. June 28, 2025 at 8:22 PM, VK (mcs) : GF Next lot quantity available GF NC reel Available : • AN: 167 CA: 70 Pre-STK> Notching: • An : 00 Ca: 00 Pre_STK > VD: • An: 03 Ca: 02 Post_STK > Stacking: • An: 58 Ca:130 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 04/84/02/102/04 VD AN (UD/Drying/LD/Wait/OOS) 00/96/08/80/08) June 28, 2025 at 8:23 PM, 최명운(CHOI MYOUNGWOON) : @MCS GF negative rotation logistics is being concentrated on one side, but the negative empty magazines of circular logistics are mostly concentrated on track 16136, so I think it's because of this. Can this be distributed to 16176? Then, circular logistics can be smoother. June 28, 2025 at 8:25 PM, 최명운(CHOI MYOUNGWOON) : The return logistics are being concentrated in one direction. June 28, 2025 at 8:28 PM, VK (mcs) : It's because of low distance . For this one it should be change the rule, Unfortunately, I have not permission . June 28, 2025 at 8:30 PM, Hữu Thắng : @FA GF NC CA can you please check AGV#10 . Thanks June 28, 2025 at 8:32 PM, 최명운(CHOI MYOUNGWOON) : Okay, I see it's dispersed now, so I guess it was temporary. June 28, 2025 at 8:52 PM, Lan Nhi : @FA #15 2-6 d1504.7 The upper and lower limit setting values ​​of the temperature exceed June 28, 2025 at 9:00 PM, Hữu Thắng : @MCS Can you check where is the MC2238 located. If possible please transfer magazines to M01 manual port . Thank a lot June 28, 2025 at 9:06 PM, VK (mcs) : According to MCS It's on MLC2079 located on Cathode VD 6/1 C6VDC010_P01 June 28, 2025 at 9:39 PM, Lan Nhi : @FA agv 9 error on machine 4/1 An. Please check it for me. Thanks June 28, 2025 at 10:18 PM, Hữu Thắng : Problem occurred . Can you please check it . Thanks June 28, 2025 at 10:20 PM, Dariimaa/다리마/Ivancsa : @Tuya pls check. June 28, 2025 at 10:21 PM, Hữu Thắng : @FA Could you please come to NC CA 5/2 as well . The rubber piece of the conveyor belt is in the wrong position. June 28, 2025 at 10:27 PM, Baek Hojong(백호종)FA : @최명운(CHOI MYOUNGWOON) 위에 상황 확인한번 부탁드립니다 June 28, 2025 at 10:28 PM, 최명운(CHOI MYOUNGWOON) : @FA TECHNICIANS. The belt needs to be disassembled and reassembled. June 28, 2025 at 10:34 PM, 최명운(CHOI MYOUNGWOON) : It's been resolved June 28, 2025 at 10:45 PM, Kim Dongju(김동주)_FA : @VK (mcs) GF Next lot quantity available Check please. June 28, 2025 at 10:54 PM, VK (mcs) : GF Next lot quantity available GF NC reel Available : • AN: 166 CA: 67 Pre-STK> Notching: • An : 00 Ca: 00 Pre_STK > VD: • An: 02 Ca: 00 Post_STK > Stacking: • An: 65 Ca:122 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 06/92/08/92/04 VD AN (UD/Drying/LD/Wait/OOS) 00/128/00/60/12) June 28, 2025 at 11:02 PM, 김현태 : VD CA AGV #5 error Thanks June 28, 2025 at 11:03 PM, Dariimaa/다리마/Ivancsa : Solved June 29, 2025 at 12:33 AM June 29, 2025 at 12:33 AM, 김현태 : NC CA ROBOT #1 error Thanks June 29, 2025 at 12:42 AM, Lan Nhi : @FA Please check the 5-8 VD/AN agv machine, has it not received the information to remove the goods when they have finished drying? June 29, 2025 at 12:48 AM, Dariimaa/다리마/Ivancsa : @MCS please check. June 29, 2025 at 1:01 AM, VK (mcs) : VD anode 5/8 Port 3 has a mismatched location error. MLA6232 located in Post-STK A72. Please check carrier ID in machine and apply UR again. June 29, 2025 at 1:07 AM, Hữu Thắng : @MCS @FA VD CA 2/1 the plate is wrong position . Can you please fix it . Thank you June 29, 2025 at 1:10 AM, Hữu Thắng : MLA6188 - MLA6232-MLA2231-MLA1102 i pressed UR . Can you please check it . Thank you June 29, 2025 at 1:12 AM, VK (mcs) : GF Next lot quantity available GF NC reel Available : • AN: 162 CA: 106 Pre-STK> Notching: • An : 00 Ca: 00 Pre_STK > VD: • An: 01 Ca: 01 Post_STK > Stacking: • An: 57 Ca:122 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 02/80/06/96/04 VD AN (UD/Drying/LD/Wait/OOS) 12/116/04/62/12) June 29, 2025 at 1:16 AM, VK (mcs) : MLA6232 has a mismatch location issue. MCS and SCS : C1STKA72 (0105707). Needs to check both carriers' ID. One of them has a different ID. @manufacturing team. Please check it out. Thx June 29, 2025 at 1:17 AM, VK (mcs) : @FA Please check it. Thx June 29, 2025 at 1:27 AM, Hữu Thắng : @FA NC AN Agv#3 stopped . Can you please check it . Thanks June 29, 2025 at 3:15 AM, VK (mcs) : @FA Please check Cathode reel STK C52 -C01 Load oversize error. June 29, 2025 at 3:38 AM, 김현태 : NC CA ROBOT #3 error Thanks June 29, 2025 at 3:57 AM, Hữu Thắng : @MCS VD CA 5/1 only 1 plate . Can you check it . Thanks June 29, 2025 at 4:02 AM, VK (mcs) : UR received but a reply for port 4 was Carrier id is null. Please modify it and apply UR again. June 29, 2025 at 4:12 AM, VK (mcs) : GF Next lot quantity available GF NC reel Available : • AN: 155 CA: 138 Pre-STK> Notching: • An : 02 Ca: 00 Pre_STK > VD: • An: 01 Ca: 02 Post_STK > Stacking: • An: 58 Ca:123 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 02/80/02/88/12 VD AN (UD/Drying/LD/Wait/OOS) 08/96/06/86/08) June 29, 2025 at 4:57 AM, Hữu Thắng : AGV#10 occurred . Can you please check it June 29, 2025 at 5:09 AM, 김현태 : This message was deleted. June 29, 2025 at 5:26 AM, 김현태 : @FA Please send the plates in the VD CA 1-2 chamber to the warehouse June 29, 2025 at 5:30 AM, Dariimaa/다리마/Ivancsa : @VK (mcs) Please check. June 29, 2025 at 5:31 AM, VK (mcs) : It’s out of service, MCS can not order in this case. Please transfer it via ACS action. June 29, 2025 at 5:56 AM, duzzaman Md (MCS) : @Fa Good morning! Please check C1CNV071_12_010 DATA MISSMATCH ERROR Thank you June 29, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:12/12 Overtime (0):- Sick (0):- Holiday (0):- Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kasztel Balázs, Nagy Zsolt 1F: Kovács Szabolcs, Novák Zoltán, Zsurbej Zsolt Modul(2): Nagy Gábor, Martina Dávid Hun Operators (2): Gombos Csaba Nagypál Gábor June 29, 2025 at 6:03 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.29 Time: 06:00~ 18:00 1.Assy 이민재(Lee minjae) 김종원(Kim jongwon) June 29, 2025 at 6:21 AM, 김종원 : This message was deleted. June 29, 2025 at 6:25 AM, 원재 : This message was deleted. June 29, 2025 at 6:30 AM, duzzaman Md (MCS) : GF Next lot quantity available GF NC reel Available : • AN: 17 CA: 0 Pre-STK> Notching: • An : 00 Ca: 01 Pre_STK > VD: • An: 61 Ca: 107 Post_STK > Stacking: • An: 138 Ca:138 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 07/84/04/84/12 VD AN (UD/Drying/LD/Wait/OOS) 13/96/08/86/16 June 29, 2025 at 6:36 AM, Jun(정우준)_SKOH FA : can you check the reel count again? thanks. June 29, 2025 at 6:38 AM, duzzaman Md (MCS) : AN: 18 CA: 00 Thanks ! June 29, 2025 at 6:39 AM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) 2hours ago, it was more than 100. June 29, 2025 at 6:42 AM, 이한웅(삼구) : please check NC An RTV June 29, 2025 at 6:42 AM, duzzaman Md (MCS) : Yeah, I also wonder the same. For AN, I see there are 240, but its getting filtered in LOT count and becoming 0. For CA, it's the same. It's getting filtered at LOT count, from 221 to 0 June 29, 2025 at 6:47 AM, Jun(정우준)_SKOH FA : I checked "next lot search" to E0STKC51_M01 at RTD. and there are 139 CA Reel available Lot. June 29, 2025 at 6:53 AM, 카스텔 발라지 F.A. : Good morning! Could you please explain these RTD filters? Thank you very much! June 29, 2025 at 6:57 AM, duzzaman Md (MCS) : I see, thers actually a misunderstanding. Thers is recent in our format. You are right. Let me update you in shortly. We used to write reels at the bottom previously June 29, 2025 at 7:11 AM, duzzaman Md (MCS) : Good morning! As in GF, thers no such cases now. Let me explain you a 1st floor case. For example, empty magazines in 1st floor, CA side. Total available material is 224 now. We check it for C0PVC040_P01 In 'WHAT_NEXT_FILTER_BANSHELF_PLATE' filter its becoming 222. In 'WHAT_NEXT_FILTER_MAGAZINE_LOT_CNT' it's becoming 01 from previous 221. As we know, for 1st floor ,the lot count should be 4. But here in RTD, currently only for 1 material, it was 4, the rest 221 were other numbers except 4. June 29, 2025 at 7:23 AM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 179 CA: 140 Pre-Stk ➤ Notching AN: 16 CA: 08 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 80 CA: 111 VD CA (Process Breakdown) UD: 06 Drying: 80 LD: 08 Wait: 92 OOS: 12 VD AN (Process Breakdown) UD: 05 Drying: 100 LD: 04 Wait: 94 OOS: 16 June 29, 2025 at 7:26 AM, Nguyen Huy : @FA @MCS Good morning, pls send AGV to take out materials from the chamber 6-8 VD CA and send back to the C71 warehouse , we need to check this chamber, thank you June 29, 2025 at 7:30 AM, Ngoc zia : @fa @mcs VD An 5-3 Drying failure due to alarm occurrence during drying. The door is open. Please return it manually to the Magazine STK-72 warehousing by agv. Thank you June 29, 2025 at 7:31 AM, duzzaman Md (MCS) : Hi, VD CA 6-8 is currently OOS. Please send it manually. Or make it 'in service', only then we could send it from MCS. Thank you June 29, 2025 at 7:32 AM, duzzaman Md (MCS) : The same. VD AN 5-3 is OOS as well. Please send it manually. June 29, 2025 at 7:35 AM, Nguyen Huy : The operator has switched it back, pls check June 29, 2025 at 7:37 AM, duzzaman Md (MCS) : Job has been created. Please take a look at AN 5-3 Thanks ! June 29, 2025 at 7:41 AM, Tetiana SL/D : Hello. Agv#9 stopped with error near Staсking Line 1/3 Please check @fa Thank you so much. June 29, 2025 at 7:48 AM, Nguyen Huy : Also switched, pls check June 29, 2025 at 7:50 AM, duzzaman Md (MCS) : Thank you. Task initiated. June 29, 2025 at 7:52 AM, Nguyen Huy : Thank you for your help June 29, 2025 at 7:55 AM, Ngoc zia : Vd An 2-6, we alo need send full mgz to C1STK72 warehousing by agv. Thank you June 29, 2025 at 7:58 AM, duzzaman Md (MCS) : Job has been created. It will be delivered when there's suitable auto port available June 29, 2025 at 8:01 AM, Ngoc zia : Nc An #robot 3 data miss match error June 29, 2025 at 8:07 AM, Szabolcs : Checking June 29, 2025 at 8:10 AM, Szabolcs : @duzzaman Md (MCS) I took the tray out because it was damaged. MLA6011 June 29, 2025 at 8:12 AM, Szabolcs : Done June 29, 2025 at 8:44 AM, Ivan Kasian Sl 5L 🥹 : Good morning everyone @fa please check cv049 stack June 29, 2025 at 8:44 AM, Ivan Kasian Sl 5L 🥹 : Run time over error June 29, 2025 at 8:44 AM, Ivan Kasian Sl 5L 🥹 : 08:39 June 29, 2025 at 8:44 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1CNV072_16_049 DATA MISSMATCH ERROR THANKS June 29, 2025 at 8:44 AM, Ivan Kasian Sl 5L 🥹 : Thank you so much June 29, 2025 at 8:50 AM, Nguyen Huy : @FA Pls check AGV #7 VD CA, thanks June 29, 2025 at 8:59 AM, Szabolcs : Done June 29, 2025 at 9:06 AM, Ivan Kasian Sl 5L 🥹 : Thank you June 29, 2025 at 9:12 AM, Ngoc zia : @fa Nc Ca robot 3 #agv9 error June 29, 2025 at 9:14 AM, Lee Junghan(이정한)_CS : Port status is abnormal. Check the port. June 29, 2025 at 9:27 AM, KIM SEYEON [김세연]_FA : @duzzaman Md (MCS) please share available lot June 29, 2025 at 9:31 AM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 189 CA: 152 Pre-Stk ➤ Notching AN: 18 CA: 14 Pre-Stk ➤ VD AN: 02 CA: 00 Post-Stock ➤ Stacking AN: 57 CA: 95 VD CA (Process Breakdown) UD: 00 Drying: 100 LD: 02 Wait: 80 OOS: 08 VD AN (Process Breakdown) UD: 04 Drying: 96 LD: 08 Wait: 74 OOS: 08 June 29, 2025 at 9:32 AM, 김지수PM(Gyuri)_FA : @이한웅(삼구) C1STKC72 UNKDUP MLC6245 > 0205804 해당자재 1F에도 존재하는거 같습니다. GF자재 출고 후, 바코드교체 부탁드리겠습니다. 감사합니다. June 29, 2025 at 10:36 AM, duzzaman Md (MCS) : @FA Kindly check E0STKA52_B09 CV driven timeover Thank you ! June 29, 2025 at 10:59 AM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) can you check available lot? June 29, 2025 at 11:07 AM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 179 CA: 150 Pre-Stk ➤ Notching AN: 25 CA: 15 Pre-Stk ➤ VD AN: 00 CA: 00 Post-Stock ➤ Stacking AN: 40 CA: 94 VD CA (Process Breakdown) UD: 04 Drying: 104 LD: 06 Wait: 72 OOS: 08 VD AN (Process Breakdown) UD: 06 Drying: 104 LD: 10 Wait: 58 OOS: 16 June 29, 2025 at 11:38 AM, Nguyen Huy : @duzzaman Md (MCS) hello, pls check VD CA 4-5, half chamber occurred, thank you June 29, 2025 at 11:44 AM, duzzaman Md (MCS) : No lot available. There's active LR. Thanks June 29, 2025 at 1:50 PM, 이한웅(삼구) : NC Ca #9, 10 AGV 1라인, 4라인 사이 기둥 센서 감지되어 자주 멈춰 있습니다. 확인 부탁드립니다. @Jun(정우준)_SKOH FA June 29, 2025 at 2:03 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 140 CA: 164 Pre-Stk ➤ Notching AN: 14 CA: 21 Pre-Stk ➤ VD AN: 00 CA: 03 Post-Stock ➤ Stacking AN: 23 CA: 78 VD CA (Process Breakdown) UD: 08 Drying: 108 LD: 10 Wait: 52 OOS: 08 VD AN (Process Breakdown) UD: 02 Drying: 112 LD: 14 Wait: 64 OOS: 16 June 29, 2025 at 2:04 PM, duzzaman Md (MCS) : @FA Please check C1STKA71_C01 there is Travel first movement error. Thank you! June 29, 2025 at 2:04 PM, 카스텔 발라지 F.A. : Solved June 29, 2025 at 2:31 PM, Nguyen Huy : @duzzaman Md (MCS) pls check VD CA 4-5, half chamber occurred long time, thank you June 29, 2025 at 2:36 PM, duzzaman Md (MCS) : There's LR. Job will be created when there will be enough materials June 29, 2025 at 2:39 PM, 이한웅(삼구) : 변경 했습니다. June 29, 2025 at 2:41 PM, 김지수PM(Gyuri)_FA : 감사합니다! 혹시 변경된 캐리어 아이디를 좀 알 수 있을까요? June 29, 2025 at 2:46 PM, 이한웅(삼구) : MLC6401 입니다. June 29, 2025 at 2:46 PM, Nguyen Huy : @FA Pls check AGV #6 VD CA, thanks June 29, 2025 at 2:47 PM, 김지수PM(Gyuri)_FA : 감사합니다! June 29, 2025 at 2:55 PM, Nguyen Huy : Again error, pls check, thank you @FA June 29, 2025 at 5:05 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 128 CA: 207 Pre-Stk ➤ Notching AN: 16 CA: 14 Pre-Stk ➤ VD AN: 00 CA: 02 Post-Stock ➤ Stacking AN: 15 CA: 88 VD AN (Process Breakdown) UD: 21 Drying: 108 LD: 18 Wait: 39 OOS: 16 VD CA (Process Breakdown) UD: 08 Drying: 112 LD: 06 Wait: 52 OOS: 08 June 29, 2025 at 6:00 PM, Farkas Tamàs : Jó estét! FA Iváncsa "C" shift (18:00-6:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Marsi Gábor Simon Attila Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Gégény Dávid ———————————— Assembly GF(4) Csuti Zoltán Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Döme György Harasztia Zoli Sarvajcz Ferenc June 29, 2025 at 6:05 PM, Shakir (MCS) : @FA Good evening Please check C1STKC71_C02 there is Forl#1 Center Error when First Active. Thank you June 29, 2025 at 6:15 PM, Shakir (MCS) : @All Good evening GF Next Lot Quantity Availability GF NC Reel Available AN: 128 CA: 206 Pre-Stk ➤ Notching AN: 13 CA: 23 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 11 CA: 72 VD AN (Process Breakdown) UD: 00 Drying: 136 LD: 08 Wait: 35 OOS: 16 VD CA (Process Breakdown) UD: 12 Drying: 112 LD: 08 Wait: 44 OOS: 12 Thank you June 29, 2025 at 6:57 PM, 은향(OH EUN HYANG) : CA Full Magazine MLC 4060 MC 1503,2014,1122,1182,1179,6473@MCS June 29, 2025 at 6:58 PM, 은향(OH EUN HYANG) : We're not going into the warehouse! Check! June 29, 2025 at 6:58 PM, Hữu Thắng : @MCS Could you please check NC CA 1/2 these magazines in Inline C/V is not moving . . June 29, 2025 at 6:58 PM, Hữu Thắng : @FA June 29, 2025 at 7:01 PM, Hữu Thắng : @MCS VD CA 6/1 only 1 plate . Could you please check it. Thanks June 29, 2025 at 7:01 PM, Shakir (MCS) : @FA please check June 29, 2025 at 7:03 PM, Shakir (MCS) : UR received but a reply for port 4 was Carrier id is null. Please modify it and apply UR again. Thank you June 29, 2025 at 7:06 PM, Hữu Thắng : @FA NC CA AGV#3 error while unloading full magazines . Can you please check it . June 29, 2025 at 7:10 PM, QuangPhan : Hello! @MCS VD AN1-5 #05 Please check LR half chamber. Thanks June 29, 2025 at 7:10 PM, Shakir (MCS) : Checking June 29, 2025 at 7:11 PM, Shakir (MCS) : LR received but lot not available, Thanks June 29, 2025 at 7:18 PM, Shakir (MCS) : This message was deleted. June 29, 2025 at 7:25 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 125 CA: 185 Pre-Stk ➤ Notching AN: 20 CA: 30 Pre-Stk ➤ VD AN: 01 CA: 02 Post-Stock ➤ Stacking AN: 02 CA: 61 VD——AN UD: 10 Drying: 132 LD: 10 Wait: 44 OOS: 16 VD——CA UD: 00 Drying: 104 LD: 04 Wait: 64 OOS: 12 June 29, 2025 at 7:52 PM, Hữu Thắng : @FA Could you please come to NC CA 1/2 plz . @Kertész Dániel . Thank you June 29, 2025 at 7:57 PM, Shakir (MCS) : @FA Please check C1STKA71_P22, Its OOS, Auto step time over error. Thank you June 29, 2025 at 8:08 PM, 정은탁 (Jung EunTak) : @FA VD Ca 4-5 (Ca #32) LR half chamber. please check. June 29, 2025 at 8:10 PM, Shakir (MCS) : @Hữu Thắng Could you please press LR for 4-5 CA Half chamber Thank you June 29, 2025 at 8:12 PM, Shakir (MCS) : @FA Please check C1STKA71_C01 there is SCP safety relay power trip error. Thank you! June 29, 2025 at 8:14 PM, Shakir (MCS) : @FA please check E0STKA52_C02 PORT INTERFACE ERROR thank you June 29, 2025 at 8:15 PM, Hữu Thắng : i pressed LR . Can u please recheck June 29, 2025 at 8:16 PM, Shakir (MCS) : LR received, Thanks June 29, 2025 at 8:24 PM, Shakir (MCS) : @Lajos Gábor F.A. June 29, 2025 at 8:24 PM, Shakir (MCS) : Please check June 29, 2025 at 8:26 PM, Hữu Thắng : @MCS Can you please check UR NC CA 2/1 June 29, 2025 at 8:26 PM, Shakir (MCS) : Checking June 29, 2025 at 8:28 PM, 정은탁 (Jung EunTak) : This message was deleted. June 29, 2025 at 8:28 PM, Shakir (MCS) : UR received, waiting for AGV, currently all AGVs are busy, Thanks June 29, 2025 at 8:38 PM, 이도형 (Lee) : @FA Nc An agv full magazine check please 2-2, 5-3 June 29, 2025 at 8:41 PM, Shakir (MCS) : @FA please check E0CNVA52_RTV error. Thanks June 29, 2025 at 9:03 PM, Shakir (MCS) : @FA Please check C1CNV072_16_155 there is INV-01 Runtime Over error. Thank you June 29, 2025 at 9:08 PM, Yon Ko/연커/ : Solved June 29, 2025 at 9:11 PM, Shakir (MCS) : @FA Please check C1STKC72_C02 Load over size error. Thank you June 29, 2025 at 9:18 PM, Hữu Thắng : @FA NC CA RTV STP-01-UP Cynlinder error . Can you please checkit . Thanks June 29, 2025 at 9:31 PM, 이도형 (Lee) : @FA VD An #5 AGV is stopped. Please check. June 29, 2025 at 9:34 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 103 CA: 190 Pre-Stk ➤ Notching AN: 00 CA: 02 Pre-Stk ➤ VD AN: 03 CA: 01 Post-Stock ➤ Stacking AN: 00 CA: 73 VD——AN UD: 08 Drying: 120 LD: 18 Wait: 46 OOS: 16 VD——CA UD: 08 Drying: 92 LD: 12 Wait: 65 OOS: 08 June 29, 2025 at 9:36 PM, Shakir (MCS) : @FA Please check E0STKA51_C02, Receive data error. Thanks June 29, 2025 at 9:57 PM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician Cathode NCPlease come to the Hungarian Technician Cathode NC June 29, 2025 at 10:06 PM, 은향(OH EUN HYANG) : This message was deleted. June 29, 2025 at 10:35 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 111 CA: 205 Pre-Stk ➤ Notching AN: 11 CA: 08 Pre-Stk ➤ VD AN: 01 CA: 03 Post-Stock ➤ Stacking AN: 05 CA: 90 VD——AN UD: 26 Drying: 96 LD: 42 Wait: 38 OOS: 16 VD——CA UD:04 Drying: 104 LD: 10 Wait: 67 OOS: 04 June 29, 2025 at 10:52 PM, 이도형 (Lee) : @FA C1CNVC71 / 8001 / UNK Confirm and Manual Entry June 29, 2025 at 10:55 PM, Yon Ko/연커/ : @MCS VD CA chamber#46 6-1 in only one material. Check this thank u! June 29, 2025 at 10:56 PM, Shakir (MCS) : UR received but a reply for port 4 was Carrier id is null. Thank you June 29, 2025 at 10:57 PM, Shakir (MCS) : I will send it to post VD June 29, 2025 at 11:00 PM, Shakir (MCS) : AGV07 on the way to bring the plate to STK. After that please Press LR for the Chamber. Thank you June 29, 2025 at 11:01 PM, 이도형 (Lee) : @Shakir (MCS) check June 29, 2025 at 11:07 PM, Shakir (MCS) : @FA @Lajos Gábor F.A. Could you please Rackin again UNK mgz located at 8001(C0PVC030_P14). MCS showing empty port. CCS showing UNK mgz. Other mgz delayed. Thank you June 29, 2025 at 11:31 PM, Shakir (MCS) : @FA please check E0CNVA52_RTV error. Thanks June 29, 2025 at 11:47 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 108 CA: 188 Pre-Stk ➤ Notching AN: 20 CA: 09 Pre-Stk ➤ VD AN: 02 CA: 00 Post-Stock ➤ Stacking AN: 15 CA: 80 VD——AN UD: 32 Drying: 80 LD: 56 Wait: 30 OOS: 16 VD——CA UD:04 Drying: 100 LD: 12 Wait: 63 OOS: 04 June 29, 2025 at 11:51 PM, Hữu Thắng : @FA Can you please check AGV#10 in NC CA . AGV was stopped . Thanks June 30, 2025 at 12:23 AM June 30, 2025 at 12:23 AM, Hữu Thắng : @MCS Can you please check UR NC CA 5/1 . Thank you June 30, 2025 at 12:23 AM, Shakir (MCS) : Checking June 30, 2025 at 12:25 AM, Shakir (MCS) : UR received, Job initiated waiting for AGV, currently all AGVs are busy, Thanks June 30, 2025 at 12:28 AM, Shakir (MCS) : AGV06 assigned for 5/1_P01 June 30, 2025 at 12:40 AM, Yon Ko/연커/ : @MCS VD CA Chamber 6-8 didn’t read the AGV’s barcode, so it failed to drop off the material. Please cancel the AGV job and return the material in the chamber back to the warehouse. June 30, 2025 at 12:41 AM, Shakir (MCS) : Working on it June 30, 2025 at 12:44 AM, Hữu Thắng : @FA NC CA AGV#5 AGV#9 was stopped . Can you please check it . Thank you June 30, 2025 at 12:45 AM, Shakir (MCS) : Previous Job cancelled, Job initiated for warehouse, Check the agv05 id under alarm. Thank you June 30, 2025 at 12:52 AM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician Cathode NC June 30, 2025 at 1:23 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 87 CA: 188 Pre-Stk ➤ Notching AN: 21 CA: 00 Pre-Stk ➤ VD AN: 03 CA: 02 Post-Stock ➤ Stacking AN: 09 CA: 84 VD——AN UD: 13 Drying: 64 LD: 64 Wait: 50 OOS: 16 VD——CA UD:06 Drying: 104 LD: 10 Wait: 63 OOS: 04 June 30, 2025 at 1:29 AM, Hữu Thắng : @Kertész Dániel Could you please come to NC CA 6/3 . Magazines is not moving INlLINE C/V . Thank you June 30, 2025 at 1:31 AM, Shakir (MCS) : @FA please check E0STKC51_C01 Load oversize error Thank you June 30, 2025 at 1:31 AM, Shakir (MCS) : @FA please check E0CNVA52_RTV error. Thanks June 30, 2025 at 1:35 AM, Shakir (MCS) : @FA Please check C1STKA72_C02 Load over size error. Thank you June 30, 2025 at 1:43 AM, 이도형 (Lee) : @FA please check E0STKC51_C01 Load oversize error June 30, 2025 at 2:08 AM, QuangPhan : Hello! @MCS VD AN 4-4 #31 Please check LR half chamber. Thanks June 30, 2025 at 2:10 AM, Shakir (MCS) : Job exits for rest half chamber but all STK outbound ports are busy. Thanks June 30, 2025 at 2:12 AM, 정은탁 (Jung EunTak) : @FA VD Ca AGV #2 Error. Please Check. June 30, 2025 at 2:14 AM, 이도형 (Lee) : @FA NC Ca #9 AGV is stopped. Please check June 30, 2025 at 2:21 AM, Shakir (MCS) : @FA Please check C1STKC72_C01, there is SCP Main Power CP trip error. Thank you June 30, 2025 at 2:23 AM, Shakir (MCS) : @Manufacturing Please check and remove 1+1 carrier from C1CNV072_M04. Thank you June 30, 2025 at 2:53 AM, Hữu Thắng : @FA NC CA Robot#3 stopped . Plz check . Thanks June 30, 2025 at 2:55 AM, 송태용(Song tae yong) : @FA NC An Robot#1 stopped . Plz check . Thanks June 30, 2025 at 3:11 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 78 CA: 156 Pre-Stk ➤ Notching AN: 09 CA: 00 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 23 CA: 81 VD——AN UD: 00 Drying: 100 LD: 66 Wait: 22 OOS: 16 VD——CA UD:04 Drying: 124 LD: 08 Wait: 51 OOS: 04 June 30, 2025 at 3:24 AM, Pavel : @FA AGV N2 Alarm stopped Line 3/3 June 30, 2025 at 4:57 AM, Ngoc zia : @rtd can u reset the password RTD id “ TEMP” pls. Someone enter wrong more than 5 times June 30, 2025 at 4:57 AM, Shakir (MCS) : Working on it June 30, 2025 at 4:59 AM, Shakir (MCS) : Password initiated now you can reset password. Thanks June 30, 2025 at 5:00 AM, Shakir (MCS) : Please use "1234" to login and set new password. June 30, 2025 at 5:01 AM, Ngoc zia : Thank you June 30, 2025 at 5:05 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 70 CA: 163 Pre-Stk ➤ Notching AN: 04 CA: 01 Pre-Stk ➤ VD AN: 09 CA: 02 Post-Stock ➤ Stacking AN: 00 CA: 78 VD——AN UD: 06 Drying: 144 LD: 40 Wait: 00 OOS: 16 VD——CA UD:07 Drying: 124 LD: 06 Wait: 108 OOS: 08 June 30, 2025 at 5:25 AM, Shakir (MCS) : @FA Please check C1STKA71_C02 it has port interface error. Thank you June 30, 2025 at 5:29 AM, Shakir (MCS) : @FA please check E0CNVC52_RTV , RUN TIME ERROR. Thank you June 30, 2025 at 5:42 AM, Mohammad Amir : Good morning@FA, Please check C1STKA72_P22 it is in manual mode and because of this two jobs are pending. Please make it Auto. Thank you very much! June 30, 2025 at 5:43 AM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.06.30 Time: 06:00~ 18:00 1.Assy 이민재(Lee minjae) 김종원(Kim jongwon) June 30, 2025 at 6:02 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.06.30. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(0): Sick(0): Shift Change(0): --------------- Electrode(4): Pálosi Róbert, Czeilinger Krisztián, Böröcz Tamás, Rácz Dánie --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Csanálosi Gábor NC OP(2): Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Böröczki Balázs --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ------- June 30, 2025 at 6:09 AM, Mohammad Amir : Good morning @Csanálosi Gábor FA Please check this issue,reels delivery has stopped. Thank you very much! June 30, 2025 at 6:14 AM, Kovács Ágnes : Solved June 30, 2025 at 6:15 AM, 최태영 : @fa tech would you check mgz number in C0PVC020_P13, MC5118? June 30, 2025 at 6:15 AM, Mohammad Amir : Thank you very much! June 30, 2025 at 6:15 AM, 최태영 : It seems a Location mismatch June 30, 2025 at 6:16 AM, Csanálosi Gábor FA : Omw June 30, 2025 at 6:17 AM, Csanálosi Gábor FA : It is here June 30, 2025 at 6:19 AM, Debreczeni Ármin : @Mohammad Amir good Morning! Please share lot quantity June 30, 2025 at 6:19 AM, Mohammad Amir : Good morning,sure! June 30, 2025 at 6:23 AM, Csanálosi Gábor FA : @Mohammad Amir please refresh error info on C1STKA71, it is in red on mcs but no errors. June 30, 2025 at 6:25 AM, Mohammad Amir : Good morning Everyone, GF Next lot quantity available GF NC reel Available :- • AN: 76, CA: 167 Pre STK > Notching:- • An : 02 Ca: 11 Pre STK > VD:- • An: 06, Ca: 02 Post STK > Stacking:- • An: 00 Ca:55 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 29/100/02/45/08 VD AN (UD/Drying/LD/Wait/OOS) 08/156/32/00/16 Thank you very much! June 30, 2025 at 6:27 AM, Mohammad Amir : Good morning, Issue has been resolved ✅. Thank you very much! June 30, 2025 at 6:27 AM, Csanálosi Gábor FA : Thank you! June 30, 2025 at 6:27 AM, Nguyen Huy : @FA Good morning, pls send AGV to take out materials from chamber 3-2 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 30, 2025 at 6:28 AM, Dariimaa/다리마/Ivancsa : @MCS please check. June 30, 2025 at 6:28 AM, Mohammad Amir : You are welcome! June 30, 2025 at 6:28 AM, Mohammad Amir : Good morning, Checking! June 30, 2025 at 6:29 AM, Mohammad Amir : Good morning, Please check the number of the chamber,is it VD CA3-2 ,are you sure ? Cause VD CA 3-2 is already empty. Thank you very much! June 30, 2025 at 6:30 AM, Nguyen Huy : Sorry, my bad, it's chamber 4-5 June 30, 2025 at 6:30 AM, Nguyen Huy : Pls also check chamber 3-9 and 6-8, half chamber occurred, thank you June 30, 2025 at 6:31 AM, Mohammad Amir : No worries, thank you for confirmation,I am working on it. June 30, 2025 at 6:31 AM, Mohammad Amir : Please make the chamber VD CA 4-5 to auto mode first. Thank you very much! June 30, 2025 at 6:31 AM, Mohammad Amir : Sure, Checking! June 30, 2025 at 6:33 AM, Nguyen Huy : I switched it, pls proceed June 30, 2025 at 6:34 AM, Mohammad Amir : For 3-9, There is an active LR as soon as enough materials will be available it will go there as well. For 6-8, Please press LR for half chamber P01/P02. Thank you very much! June 30, 2025 at 6:34 AM, Mohammad Amir : Sure, Checking! June 30, 2025 at 6:37 AM, Mohammad Amir : Jobs have been created successfully to send these materials to Post VD STK ✅ AGV#3&#2 has been assigned successfully. I am monitoring. Thank you very much! June 30, 2025 at 6:38 AM, Nguyen Huy : Thank you so much for your help!! June 30, 2025 at 6:39 AM, Nguyen Huy : @FA Good morning, pls send AGV to take out materials from chamber 1-2 VD CA and send it back to C71 warehouse, we need to check this chamber, thank you June 30, 2025 at 6:40 AM, Mohammad Amir : You are welcome! June 30, 2025 at 6:40 AM, Mohammad Amir : Sure, working on it. June 30, 2025 at 6:43 AM, Mohammad Amir : Jobs have been created successfully to send these materials to Post VD STK ✅ I am monitoring. Thank you very much! June 30, 2025 at 6:50 AM, Szücs Géza FT-B : @samko @FA GF NC-VD kézi anyag mozgatást ki felügyeli a mai napon? Who supervises GF NC-VD manual material handling today? June 30, 2025 at 6:55 AM, Takács Ádám FA Tech : @Mohammad Amir good morning. please create a delivery task for LTC0946. originally intended for port 9029 June 30, 2025 at 6:55 AM, Mohammad Amir : Good morning,Checking. June 30, 2025 at 6:56 AM, Mohammad Amir : Update:- VD CA 4-5 has been successfully unloaded ✅. Thank you very much! June 30, 2025 at 7:04 AM, Mohammad Amir : Job has been created successfully ✅. Thank you very much! June 30, 2025 at 7:25 AM, Debreczeni Ármin : @Mohammad Amir please share lot quantity again. Sorry I will ask multiple times June 30, 2025 at 7:26 AM, Mohammad Amir : It is okay ask me as many time as you like,I will share . Thank you very much! June 30, 2025 at 7:29 AM, Mohammad Amir : GF Next lot quantity available GF NC reel Available :- • AN: 79, CA: 174 Pre STK > Notching:- • An : 29 Ca: 05 Pre STK > VD:- • An: 02, Ca: 02 Post STK > Stacking:- • An: 00 Ca:41 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 15/96/16/51/04 VD AN (UD/Drying/LD/Wait/OOS) 25/132/34/12/16 Thank you very much! June 30, 2025 at 7:30 AM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Load Oversize error. Thank you very much! June 30, 2025 at 7:39 AM, Kovács Ágnes : Solved June 30, 2025 at 7:42 AM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 8:10 AM, Mohammad Amir : Good morning @Manufacturing, Please check VD CA 6-1 P04 ,is there any carrier actually exists? Thank you very much! June 30, 2025 at 8:13 AM, Nguyen Huy : @FA AGV #10 error near NC CA 4-3, pls check June 30, 2025 at 8:14 AM, Tasnim / Ivancsa FA : Done June 30, 2025 at 8:42 AM, Mohammad Amir : Dear @Debreczeni Ármin , GF Next lot quantity available GF NC reel Available :- • AN: 82, CA: 168 Pre STK > Notching:- • An : 35 Ca: 00 Pre STK > VD:- • An: 04, Ca: 00 Post STK > Stacking:- • An: 04 Ca:33 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 08/104/06/51/04 VD AN (UD/Drying/LD/Wait/OOS) 08/124/40/36/12 Thank you very much! June 30, 2025 at 8:49 AM, Debreczeni Ármin : Thank you June 30, 2025 at 8:49 AM, Mohammad Amir : You are welcome! June 30, 2025 at 9:03 AM, 이한웅(삼구) : @이주봉PM LEE JUBONG(FA) 저희 오늘 오전에 후창고에 들어간게 60 플레이트 있는데 이게 전부 수분 측정 값이 입력 안되서 그런가요??? June 30, 2025 at 9:03 AM, 이한웅(삼구) : 음극입니다. June 30, 2025 at 9:07 AM, 이민재 : 수분검사 완료 안된 챔버 19챔버 있습니다 June 30, 2025 at 9:09 AM, 김동섭 : 언로딩 부탁드립니다 MLC0051 존재 합니다 June 30, 2025 at 9:10 AM, Mohammad Amir : Sure Sir, Working on it. June 30, 2025 at 9:11 AM, Mohammad Amir : Sir, I have given command and AGV#2 has been assigned to unload successfully ✅. Thank you very much! June 30, 2025 at 9:12 AM, 김동섭 : 감사합니다. June 30, 2025 at 9:14 AM, Mohammad Amir : You are welcome! June 30, 2025 at 9:16 AM, 김지수PM(Gyuri)_FA : 6-1 P04 센서점검이 필요해보입니다, 건조 후(언로딩 전) P04에서 로드컴플리트 신호가 올라옵니다. 감사합니다. June 30, 2025 at 9:17 AM, 방혁 PM(Bang.Hyuk) FA : @JAEYOON KIM / CS @Lee Junghan(이정한)_CS June 30, 2025 at 9:18 AM, 이한웅(삼구) : @please check NC Ca #3 Robot June 30, 2025 at 9:23 AM, 이주봉PM LEE JUBONG(FA) : VD 후창고에 자재들이 반송 가능 자재로 안뜨네요. MES MES 조립-> Magazine plate 관리에서. 창고에있는 plate MLA1149 조회 메거진과 플레이트 매핑 된 메거진 번호 MA3395를 확인하면 Stacking 생산 실적 마감 자재상태 조회 결과. 1.NC반제품 검사 : 합격 2.VD 마감 여부: 마감필요 3.수분측정 여부: 측정필요 4.QA Approved :측정필요 5.ST 투입가능여뷰 : 투입 불가. 상태이오니 상기 내용 참고 하시어 상태 조회 부탁드립니다. June 30, 2025 at 9:23 AM, Debreczeni Ármin : @Szücs Géza FT-B 2_6 12 4_6 33 5_9 45 5_4 40 6_4 49 5_2 38 6_1 46 2_6 15 3_7 25 3_3 21 4_2 29 Ez gf Ca oldali kemencék amiből olyan anyag ment el ami nem felhasználótól. Rossz a VD mérés eredménye. Ezek az anyagok elviekben vissza jönnek a manual portra. Ha vannak ilyen anyagok jelöld meg benne @Kristina-át és én mondom hova vitesse. June 30, 2025 at 9:25 AM, 이한웅(삼구) : 넵 알겠습니다 June 30, 2025 at 9:33 AM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 78, CA: 174 Pre STK > Notching:- • An : 18 Ca: 00 Pre STK > VD:- • An: 02, Ca: 00 Post STK > Stacking:- • An: 00, Ca:28 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 05/108/04/67/12 VD AN (UD/Drying/LD/Wait/OOS) 18/104/42/52/08 Thank you very much! June 30, 2025 at 9:34 AM, Sazzad Bhai SKon : @FA Magazines are duplicated in these plates. MLA0144 (C1STKA72, 0105704) MLA6076 (C1STKA72, 0105502) please rack out from manual port, confirm magazines id and restock June 30, 2025 at 9:42 AM, 김지수PM(Gyuri)_FA : @manufacturing MLA0144 MLA6076 > these two plates have same Lot ID(MA1315 MA5140) Please check it June 30, 2025 at 9:48 AM, Debreczeni Ármin : Agv #6 stopped at front of 3/5 an VD June 30, 2025 at 10:36 AM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 81, CA: 157 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 00, Ca: 00 Post STK > Stacking:- • An: 26, Ca:18 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 00/96/04/75/16 VD AN (UD/Drying/LD/Wait/OOS) 14/84/44/60/12 Thank you very much! June 30, 2025 at 10:37 AM, Mohammad Amir : @Csanálosi Gábor FA Please check C1STKA71_C1/C2 there is SCP Main Power CP trip error and it is blocking empty magazine delivery and transfer to VD. Thank you very much! June 30, 2025 at 10:38 AM, Takács Ádám FA Tech : Korean colleagues are working on it June 30, 2025 at 10:38 AM, Csanálosi Gábor FA : @Takács Ádám FA Tech @Kovács Ágnes June 30, 2025 at 10:39 AM, Mohammad Amir : Thank you very much for the confirmation! June 30, 2025 at 10:44 AM, Takács Ádám FA Tech : they are ready. The warehouse is back in operation June 30, 2025 at 10:50 AM, Lan Nhi : @FA Hello. Please help me load 2 more pallets for machine 4-5 and 2-9 VD/CA. Thank you. June 30, 2025 at 10:50 AM, Mohammad Amir : Checking June 30, 2025 at 10:51 AM, Mohammad Amir : @FA @Takács Ádám FA Tech Please check NC AN Robot #3 and #2 . Thank you very much! June 30, 2025 at 10:56 AM, Mohammad Amir : Hello, I think you are taking about AN ? For VD AN 2-9 , Issue has been resolved and now material filled full chamber. ✅ For VD AN 4-5, Jobs have also created however all O/P ports of the pre VD AN STK is busy that's why you are witnessing delay as soon as it will be free carrier will go there. I am monitoring. Please let me know if you need any further assistance. Thank you very much! June 30, 2025 at 10:57 AM, Mohammad Amir : @FA Please check Robot #2 NC AN. Thank you very much! June 30, 2025 at 10:59 AM, Csanálosi Gábor FA : Korean technicians working on it June 30, 2025 at 11:00 AM, Mohammad Amir : Thank you very much for the information! June 30, 2025 at 11:06 AM, Mohammad Amir : Update :- For VD AN 4-5, AGV#10 has assigned to load 2 more pallets ✅. Thank you very much! June 30, 2025 at 11:07 AM, Lan Nhi : Thank you June 30, 2025 at 11:08 AM, Mohammad Amir : You are welcome! June 30, 2025 at 11:28 AM, Mohammad Amir : Hello, Is Korean technician now working on Robot #1 CA ? It is OoS and empty magazine job is pending. Thank you very much! June 30, 2025 at 11:34 AM, Csanálosi Gábor FA : Re checking, hold on June 30, 2025 at 11:38 AM, Csanálosi Gábor FA : COPVC010 is online, only COPVA010 is under investigation by korean technicians June 30, 2025 at 11:38 AM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 11:46 AM, 이한웅(삼구) : please check An VD #4 AGV June 30, 2025 at 11:55 AM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 83, CA: 160 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 00, Ca: 02 Post STK > Stacking:- • An: 52, Ca:01 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 04/84/48/60/16 VD AN (UD/Drying/LD/Wait/OOS) 08/84//60/12 Thank you very much! June 30, 2025 at 12:16 PM, 김희래 : Please check again. It seems like to miss about VD AN LD count. June 30, 2025 at 12:16 PM, Mohammad Amir : Sure Sir,Checking! June 30, 2025 at 12:20 PM, Mohammad Amir : Dear @김희래 Sir, GF Next lot quantity available GF NC reel Available :- • AN: 84, CA: 173 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 02, Ca: 01 Post STK > Stacking:- • An: 66, Ca:07 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 16/72/04/79/08 VD AN (UD/Drying/LD/Wait/OOS) 03/92/46/68/16 Thank you very much! June 30, 2025 at 12:20 PM, Mohammad Amir : @김지수PM(Gyuri)_FA For your information. Thank you very much! June 30, 2025 at 12:26 PM, Mohammad Amir : @Manufacturing Please check the sensor VD CA 5-1 P04 , load completed signal received after Unloading as well. And during unloading carrier id was reported Null from P04. Could you please also confirm me is there any actual carrier exists at P04? Thank you very much! June 30, 2025 at 12:31 PM, Mohammad Amir : @김동섭 Sir, Could you please check this issue. Thank you very much! June 30, 2025 at 12:40 PM, Lan Nhi : @FA Please add 2 more pallets to the machine 1/5 VD/An. Thank you. June 30, 2025 at 12:40 PM, Mohammad Amir : Sure, Checking! June 30, 2025 at 12:42 PM, Mohammad Amir : Hello, For VD AN 1-5, It is already full. We have received UR Successfully and now jobs have been created to transferred these materials to back warehouse. AGV#2 and #10 has been assigned to unload. ✅ Thank you very much! June 30, 2025 at 12:45 PM, Lan Nhi : Thank you very much June 30, 2025 at 12:45 PM, Mohammad Amir : You are welcome! June 30, 2025 at 12:58 PM, Mohammad Amir : @Csanálosi Gábor FA Please check E0STKC51_C01 there is MCP AP error. Thank you very much! June 30, 2025 at 12:58 PM, Csanálosi Gábor FA : On it June 30, 2025 at 1:00 PM, 이한웅(삼구) : Ca VD 5-1(#37) 플레이트 한개 남아있는데 확인 부탁드립니다. @이민재 June 30, 2025 at 1:00 PM, 김동섭 : AN VD 1-4 좌측 플레이트 상,하 안착 불량 입니다 AGV 재안착 부탁드립니다 June 30, 2025 at 1:01 PM, Mohammad Amir : @김동섭 Sir Could you please check this issue. Thank you very much! June 30, 2025 at 1:02 PM, Mohammad Amir : Sir, the sensor VD CA 5-1 P04 needs to be checked , load completed signal received after Unloading as well. And during unloading carrier id was reported Null from P04. That's why one carrier exists,i asked the manufacturing team for confirming. Thank you very much! June 30, 2025 at 1:16 PM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv071 >12019track June 30, 2025 at 1:16 PM, Mohammad Amir : @Fa @Csanálosi Gábor FA Please check C1CNV071_12_018 (Anode) there is Data loss error and materials recovery has stopped. Thank you very much! June 30, 2025 at 1:17 PM, Xeng : pls NC CA check agv#1 error mgz output error June 30, 2025 at 1:18 PM, Csanálosi Gábor FA : @Takács Ádám FA Tech June 30, 2025 at 1:19 PM, 김동섭 : MLC2086 존재 합니다 June 30, 2025 at 1:19 PM, 김동섭 : 언로딩 부탁드립니다 June 30, 2025 at 1:20 PM, 박강민 : AN VD 1-4 좌측 플레이트 상,하 안착 불량 입니다 AGV 재안착 부탁드립니다 June 30, 2025 at 1:20 PM, Kovács Ágnes : Solved June 30, 2025 at 1:20 PM, Mohammad Amir : Sir, Issue has been resolved ✅. Now job has created to unload AGV#3 has assigned to unload ✅ Thank you very much! June 30, 2025 at 1:21 PM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 1:21 PM, 이한웅(삼구) : @김동섭 확인 부탁드립니다.. June 30, 2025 at 1:22 PM, 김지수PM(Gyuri)_FA : 5-1 P04에서 계속 로드컴플리트 신호가 올라옵니다. 센서 점검 부탁드리겠습니다. 감사합니다. June 30, 2025 at 1:24 PM, 박강민 : AN VD 1-3 좌측 하부 플레이트 안착 불량 입니다 AGV 재안착 부탁드립니다 June 30, 2025 at 1:30 PM, 정다은 : This message was deleted. June 30, 2025 at 1:35 PM, 정다은 : @Mohammad AmirDear, could you share the latest status? Thank you June 30, 2025 at 1:35 PM, Nguyen Huy : @FA Pls send AGV to reposition the top right and bottom right plates at VD CA 1-5 chamber, thanks June 30, 2025 at 1:36 PM, Sazzad Bhai SKon : GF Next lot quantity available GF NC reel Available :- • AN: 122, CA: 183 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 00 Post STK > Stacking:- • An: 57, Ca:00 For stack/VD UR LR, we're working on it June 30, 2025 at 1:38 PM, Xeng : NC CA agv#7 error June 30, 2025 at 1:43 PM, 김동섭 : CA VD 1-5 우측 상,하 플레이트 안착 불량 입니다. AGV로 재안착 부탁드립니다. June 30, 2025 at 1:48 PM, 김동섭 : CA VD 1-5 아니고 1-6호기 입니다 June 30, 2025 at 1:56 PM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 126, CA: 186 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 01 Post STK > Stacking:- • An: 52, Ca:00 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 02/56/04/115/08 VD AN (UD/Drying/LD/Wait/OOS) 04/92/30/80/16 Thank you very much! June 30, 2025 at 2:10 PM, Mohammad Amir : @Takács Ádám FA Tech Please check E0STKC51_P01 it is in manual mode hence OOS and it has stopped materials recovery. Thank you very much! June 30, 2025 at 2:15 PM, Csanálosi Gábor FA : Omw June 30, 2025 at 2:22 PM, Csanálosi Gábor FA : Done June 30, 2025 at 2:22 PM, Mohammad Amir : Thank you very much! June 30, 2025 at 2:29 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir VD AN C1STKA71_P17 P18 does not move for a long time. Please check Thank you! June 30, 2025 at 2:29 PM, Mohammad Amir : Sure, Checking! June 30, 2025 at 2:32 PM, Mohammad Amir : @Nguyen Huy Could you please make VD AN 2-6 in Auto mode ,it is in Manual mode now and because of this several jobs are pending. Thank you very much! June 30, 2025 at 2:32 PM, Mohammad Amir : Carriers located at it has destination to VD AN 2-6 and currently 2-6 is in Manual mode that's why these carriers are not moving ,i already informed the manufacturing team to Make the chamber in Auto mode. Thank you very much! June 30, 2025 at 2:33 PM, Sazzad Bhai SKon : @FA VD CA 6-8 line is half chamber June 30, 2025 at 2:33 PM, Dariimaa/다리마/Ivancsa : Thank you! June 30, 2025 at 2:33 PM, Mohammad Amir : If you don't need materials in that chamber also inform me ,I will take action. Now carriers are not moving and it is slowing down VD materials delivery. Thank you very much! June 30, 2025 at 2:34 PM, Mohammad Amir : You are welcome! June 30, 2025 at 2:39 PM, Mohammad Amir : @Csanálosi Gábor FA Please check E0STKC51_C01 there is MCP AP error. Thank you very much! June 30, 2025 at 2:42 PM, Nguyen Huy : @Lan Nhi June 30, 2025 at 2:45 PM, Csanálosi Gábor FA : Done June 30, 2025 at 2:45 PM, Lan Nhi : Thanks for your information June 30, 2025 at 2:45 PM, Mohammad Amir : Thank you very much! June 30, 2025 at 2:45 PM, Mohammad Amir : You are welcome! June 30, 2025 at 2:49 PM, Lan Nhi : Please check again for me. Op has switched to automatic mode. June 30, 2025 at 2:49 PM, Mohammad Amir : Thank you very much 🙏. Now it is auto mode. June 30, 2025 at 2:50 PM, Mohammad Amir : Update:- Issue has been resolved ✅ Carriers have started to move. I am monitoring. Thank you very much! June 30, 2025 at 2:53 PM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 132, CA: 183 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 02, Ca: 02 Post STK > Stacking:- • An: 54, Ca:00 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 04/64/10/105/08 VD AN (UD/Drying/LD/Wait/OOS) 04/108/20/72/12 Thank you very much! June 30, 2025 at 2:53 PM, Xeng : NC CA Robot#3 error June 30, 2025 at 2:58 PM, Csanálosi Gábor FA : @Kovács Ágnes hozz légyszíves kamerát June 30, 2025 at 2:58 PM, Kovács Ágnes : Viszem June 30, 2025 at 3:54 PM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 46, CA: 182 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 03, Ca: 03 Post STK > Stacking:- • An: 99, Ca:00 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 00/76/04/93/08 VD AN (UD/Drying/LD/Wait/OOS) 07/128/08/68/08 Thank you very much! June 30, 2025 at 3:54 PM, Debreczeni Ármin : @Mohammad Amir please send new one June 30, 2025 at 3:54 PM, Debreczeni Ármin : Thank you June 30, 2025 at 3:54 PM, Mohammad Amir : @Debreczeni Ármin Thank you very much! June 30, 2025 at 3:55 PM, Mohammad Amir : You are welcome! June 30, 2025 at 4:22 PM, Mohammad Amir : @Manufacturing @김동섭 Please check and confirm what is the actual Carrier exists on VD AN 5-2(P03) and VD AN 3-7(P01). Thank you very much! June 30, 2025 at 4:29 PM, 김동섭 : AN VD 3-7 P1 : MLA6099 AN VD 5-2 P3 MLA6102 June 30, 2025 at 4:29 PM, Mohammad Amir : Thank you very much 🙏 June 30, 2025 at 4:30 PM, 김동섭 : AN VD5-2 P3 플레이트 ID 인식이 안됨 June 30, 2025 at 4:31 PM, 김동섭 : AN VD 5-2 P3 매거진 방향이 반대 임 June 30, 2025 at 4:32 PM, 김동섭 : P3 전극 코일이 안쪽으로 향하고 있슴 June 30, 2025 at 4:33 PM, Mohammad Amir : @Dariimaa/다리마/Ivancsa @FA Could you please check this. Thank you very much! June 30, 2025 at 4:33 PM, 김동섭 : P3 인식 불가로 장비 가동 안됨 June 30, 2025 at 4:35 PM, 김동섭 : AN VD 5-2 P3 언로드 요청드립니다 June 30, 2025 at 4:36 PM, Mohammad Amir : @FA Could you please physically check the plate located at VD AN 4-1 P01 in our database it shows MLA6099 located here . And according to operations MLA6099 also located at VD AN 3-7 P01(MLA6099). Needs confirmation. Thank you very much! June 30, 2025 at 4:37 PM, Mohammad Amir : Sir, Already informed the AGV members regarding the issue. Thank you very much! June 30, 2025 at 4:38 PM, 김동섭 : 네 지금 현재 두곳다 존재합니다 June 30, 2025 at 4:41 PM, Mohammad Amir : Sir, It seems like a duplicated case. So in this case please let the VD complete first for both chambers and afterwards keep one outside of STK and change the barcode. And send another one post VD STK. @MES, Please check this issue,we need new barcode for one plate. Thank you very much! June 30, 2025 at 4:43 PM, 방혁 PM(Bang.Hyuk) FA : @KIM SEYEON [김세연]_FA @Kim Dongju(김동주)_FA @박태영 MLA6099 바코드를 가지고 있는 플레이트가 음극 4-1 P01 음극 3-7 P01 음극 5-2 P03 이렇게 총 3군대에 동시에 존재하고있습니다. 이 상태로 반송 진행시키면 화물 데이터가 꼬일것같은데 어찌 조치해야할지 컨펌 부탁드립니다.. June 30, 2025 at 4:48 PM, 김동섭 : 음극 4-1 , 3-7 은 현재 건조중 이며 5-2는 챔버 건조대기중으로 플레이트 인식이 안돼어서 빼낼려고 하고 있습니다. June 30, 2025 at 4:49 PM, 방혁 PM(Bang.Hyuk) FA : 일단 5-2는 제조로 인수인계하여서 바코드 새로 부착하고 나머지는 건조후에 재부착 요청해야할 것 같습니다 June 30, 2025 at 4:50 PM, 김동섭 : AN VD 5-2 P3 언로드 요청드립니다 June 30, 2025 at 4:51 PM, Mohammad Amir : @Dariimaa/다리마/Ivancsa Please manually unload it using AGV ,it is duplicated case. Thank you very much! June 30, 2025 at 4:58 PM, 박태영 : 정다은PM님에게 설명드렸습니다. June 30, 2025 at 4:59 PM, 방혁 PM(Bang.Hyuk) FA : 감사합니다 확인했습니다 June 30, 2025 at 5:01 PM, Debreczeni Ármin : @Mohammad Amir please share lot quantity June 30, 2025 at 5:02 PM, Mohammad Amir : Sure, Checking! June 30, 2025 at 5:03 PM, 정다은 : 해등 플레이트는 창고에 들어갔을 때 홀드 처리 부탁드립니다. 제조에서 수동으로 취외 후 바코드 재부착 하겠습니다 June 30, 2025 at 5:06 PM, 방혁 PM(Bang.Hyuk) FA : 네 확인했습니다 June 30, 2025 at 5:06 PM, Mohammad Amir : This message was deleted. June 30, 2025 at 5:06 PM, Mohammad Amir : Dear @All, GF Next lot quantity available GF NC reel Available :- • AN: 152, CA: 177 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 02,Ca: 00 Post STK > Stacking:- • An: 111,Ca:19 ///////////////////////////////////////// VD CA (UD/Drying/LD/Wait/OOS) 08/80/04/93/04 VD AN (UD/Drying/LD/Wait/OOS) 04/124/04/80/08 Thank you very much! June 30, 2025 at 5:08 PM, 김동섭 : AN VD 5-2 P3 로딩 부탁드립니다. June 30, 2025 at 5:09 PM, 방혁 PM(Bang.Hyuk) FA : 5-2 p04도 언로드하고 새로 명령 만들어서 p03 p04로 로드 해드리겠습니다 June 30, 2025 at 5:10 PM, 김동섭 : 네 감사합니다 June 30, 2025 at 5:11 PM, 이민재 : 5-2 P03 에서 꺼낸 오븐플레이트 실물 MLA6102 로 확인했습니다. MLA 6102플레이트도 바코드스캔시 문제 있어서 일단 바코드 교체필요 합니다. 수동대차로 꺼내서 카트로 옮겨놓은 상황이라 전창고로 넣어야 하는데 VD쪽 제조에 인계해 놓겠습니다 June 30, 2025 at 5:12 PM, 정다은 : This message was deleted. June 30, 2025 at 5:12 PM, 정다은 : 그럼 실제 바코드는 MLA6102인데, RTD 시스템 상 MLA6099로 잘못 올라가 있었던 건가요? June 30, 2025 at 5:13 PM, 이민재 : 한국진공 분들이 바코드스캐너 이용해서 수동으로 찍어 보셨는데 6099로 뜬걸로 알고 있습니다. 꺼내서 다시 찍었을때 6102로 뜨는거 확인 했습니다 June 30, 2025 at 5:16 PM, 김동섭 : 언로드 완료 됐습니다. June 30, 2025 at 5:16 PM, 방혁 PM(Bang.Hyuk) FA : 곧 새로운 화물로 로드 예정입니다 June 30, 2025 at 5:17 PM, 김동섭 : 네 감사합니다. June 30, 2025 at 5:18 PM, Mohammad Amir : Sir, Could you please confirm MLA6102 , Cause in our Database we see MLA6102 located in C6VDA090_P04 as well. Please check this chamber as well. Thank you very much! June 30, 2025 at 5:20 PM, 김지수PM(Gyuri)_FA : 5-2 P03 P04 LR다시 올려주시면 감사하겠습니다. June 30, 2025 at 5:21 PM, 김동섭 : 네 AN VD 6-9 P4 존재 합니다 June 30, 2025 at 5:22 PM, Mohammad Amir : This message was deleted. June 30, 2025 at 5:23 PM, Mohammad Amir : Sir @이민재 Please check MLA6102 as well it is suspected to be duplicated as well. It is located at C6VDA090_P04 as well. Thank you very much! June 30, 2025 at 5:28 PM, 이한웅(삼구) : @Mohammad Amir Is the plate status on hold? MLC4189 MLC2128 MLC4211 MLC4213 MLC6008 MLC2183 MLC2250 MLC2177 MLC3220 June 30, 2025 at 5:28 PM, Mohammad Amir : Sure Checking! June 30, 2025 at 5:33 PM, 이민재 : MLA6099, MLA6102 중복바코드로 확인 되어 시프트리더 한테 교체요청 했습니다 June 30, 2025 at 5:34 PM, Mohammad Amir : Yes Sir, I checked from RTD database and i confirmed all teb mentioned carriers are in hold status. Please let me know if you need any further assistance. Thank you very much! June 30, 2025 at 5:46 PM, 이한웅(삼구) : What is the reason for the hold? June 30, 2025 at 5:46 PM, Mohammad Amir : GF Next lot quantity available GF NC reel Available :- • AN: 162, CA: 175 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 00 Post STK > Stacking:- • An: 114, Ca:10 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 09/116/06/74/08 VD CA (UD/Drying/LD/Wait/OOS) 00/76/5/105/04) Thank you very much! June 30, 2025 at 5:47 PM, 이한웅(삼구) : If there’s no issue, could you please release the hold? June 30, 2025 at 5:50 PM, Sazzad Bhai SKon : Some carriers are hold state due previously duplicated magazines. But once the magazine information is corrected, hold status must be released Manually. June 30, 2025 at 5:51 PM, Mohammad Amir : Dear Sir, Unfortunately we don't have permission to release hold status. As my colleague explained due to duplicated status of MGZ hold exists but after confirmation,it can be released. Thank you very much! June 30, 2025 at 5:53 PM, 박태영 : If you write an it ticket, we will reflect it. June 30, 2025 at 5:53 PM, 박태영 : IT TICKET 작성해 주시면 수정하도록 하겠습니다 June 30, 2025 at 5:55 PM, 이한웅(삼구) : @정다은 PM님 해당 플레이트 전부 홀드 상태라고 하는데 혹시 IT Ticket 작성 가능할까요? June 30, 2025 at 5:57 PM, Sazzad Bhai SKon : There are 50+ plates on hold state. I checked, the hold state can be released for (no duplicated magazines found). Only exception these two plates June 30, 2025 at 6:01 PM, 이도형 (Lee) : @FA NC An #2 Robot is stopped. Please check. June 30, 2025 at 6:01 PM, Hồng Anh SL NC&VD 1F : Pls check for AGV 2 VD Ca. June 30, 2025 at 6:22 PM, 은향(OH EUN HYANG) : Please come to the Hungarian Technician AN NC June 30, 2025 at 6:31 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 13 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— June 30, 2025 at 6:46 PM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 171, CA: 172 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 03, Ca: 02 Post STK > Stacking:- • An: 87, Ca:00 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 06/104/02/98/08 VD CA (UD/Drying/LD/Wait/OOS) 00/84/08/97/04) Thank you June 30, 2025 at 7:07 PM, P.Bence A SSL : @Shakir (MCS) please delete L1-L2 stacking CA LR request June 30, 2025 at 7:07 PM, Shakir (MCS) : Checking June 30, 2025 at 7:10 PM, Shakir (MCS) : There’s No Active LR for Line 1&2 ST. Thank you June 30, 2025 at 7:30 PM, 이도형 (Lee) : @FA NC An #1 Robot is stopped. Please check. June 30, 2025 at 7:32 PM, 이도형 (Lee) : @FA NC Ca #3 Robot is stopped. Please check. June 30, 2025 at 7:32 PM, 정다은 : 네 작성 가능합니다. 사유는 따로 없는 건가요? June 30, 2025 at 7:38 PM, 정은탁 (Jung EunTak) : @FA VD An 5-2(An#38) LR half chamber. please check. June 30, 2025 at 7:38 PM, Shakir (MCS) : Checking June 30, 2025 at 7:39 PM, Shakir (MCS) : LR received but lot not available June 30, 2025 at 7:40 PM, 이한웅(삼구) : MCS 설명으로는 전에 중복이었던거 같은데 MES 확인 시 저희쪽 정보에는 이상 없었습니다. 실물 확인 후 다시 요청 드리겠습니다. @이도형 (Lee) 혹시 중복 매거진 있는지 실물 및 MES 확인 한번 부탁드립니다. June 30, 2025 at 7:48 PM, Nadiia Arkhipova : AGV machine #10 stop 5 line please check June 30, 2025 at 8:04 PM, Shakir (MCS) : @FA Please check C1STKC71_P22, is OOS. Thank you June 30, 2025 at 8:15 PM, Novák Károly F. A. : Solved June 30, 2025 at 8:22 PM, Novák Károly F. A. : @Shakir (MCS) Hi. Please check the carrier on port E0STKA51 M03. Lta1489 is an empty carrier. June 30, 2025 at 8:25 PM, Shakir (MCS) : According to MCS carrier is Full at M03 June 30, 2025 at 8:31 PM, Novák Károly F. A. : Lta1489 currently empty carrier. June 30, 2025 at 8:36 PM, Shakir (MCS) : Now Carrier status changed ✅ June 30, 2025 at 8:40 PM, P.Bence A SSL : @Shakir (MCS) please delete L3 stacking all LR job . June 30, 2025 at 8:40 PM, Novák Károly F. A. : Thank you very much for your help. June 30, 2025 at 8:40 PM, Shakir (MCS) : Checking June 30, 2025 at 8:45 PM, Shakir (MCS) : Currently there’s no active LR for line 3 ST. Thank you June 30, 2025 at 8:55 PM, Nguyên invited Victory. June 30, 2025 at 9:02 PM, Kim Dongju(김동주)_FA : @Shakir (MCS) GF Next lot quantity available. Please check every two hours. June 30, 2025 at 9:02 PM, Shakir (MCS) : Sure, June 30, 2025 at 9:09 PM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 199, CA: 171 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 00, Ca: 02 Post STK > Stacking:- • An: 161, Ca:06 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 00/88/04/114/08 VD CA (UD/Drying/LD/Wait/OOS) 08/48/64/77/04) Thank you June 30, 2025 at 9:38 PM, 이도형 (Lee) : @FA , @MCS Nc Ca agv full magazine check please 3-1, 6-3, 6-1 June 30, 2025 at 9:39 PM, Shakir (MCS) : Checking June 30, 2025 at 9:47 PM, Shakir (MCS) : All AGVs are busy ,I have provided priority so as soon as AGV will be free it will assign to it. Thank you June 30, 2025 at 9:51 PM, 정은탁 (Jung EunTak) : @FA VD Ca AGV #5 Error. Please Check. June 30, 2025 at 10:05 PM, Shakir (MCS) : @FA Please check robot 1 & 3, no plate Thanks June 30, 2025 at 10:05 PM, Shakir (MCS) : Cathode side June 30, 2025 at 10:11 PM, 이도형 (Lee) : 실물 및 MES 확인 이상없음습니다. MLC4189 확인 6228 1065 4453 1200 6537 6333 MLC2128 확인 1372 1143 6327 3045 6199 2511 MLC4211 확인 1486 6558 3171 4267 5025 5175 MLC4213 확인 4339 3299 1222 2298 4204 6182 MLC6008 확인 3361 4544 5445 2372 2085 5417 MLC2183 확인 1013 3385 3527 4562 5211 4375 MLC2250 확인 5119 5437 6065 3475 4176 2152 MLC2177 확인 3288 2578 5522 3352 3166 2146 MLC3220 확인 3393 4364 4551 2385 6329 2580 June 30, 2025 at 10:27 PM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 221, CA: 181 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 01 Post STK > Stacking:- • An: 162, Ca:00 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 00/88/02/110/08 VD CA (UD/Drying/LD/Wait/OOS) 12/76/34/75/04) Thank you June 30, 2025 at 10:32 PM, 송태용(Song tae yong) : @FA NC Ca #1 Robot is stopped. Please check. June 30, 2025 at 10:43 PM, 은향(OH EUN HYANG) : @Mr.Miti (미티) FA NC Ca #1 Robot is stopped. Please check. June 30, 2025 at 10:44 PM, Anita Mirosnicsenko : Hello! Line 6 AGV5 stopped, please check! Thank you!! June 30, 2025 at 10:50 PM, Victory : Hello, NC CA GF Line 3.1 The full MGZ need to be removed by AGV (delayed around 2 hrs) Pls assign AGV to resolve it. Tks June 30, 2025 at 11:08 PM, Nguyên : Pls fix plate position on chamber 41(5/5) VD AN GF June 30, 2025 at 11:17 PM, Yon Ko/연커/ : Done. June 30, 2025 at 11:46 PM, 김수민 : @Shakir (MCS) Please check if it is still on hold June 30, 2025 at 11:46 PM, Shakir (MCS) : @FA Please check E0STKA52_C01 there is MCP AP error. Thank you June 30, 2025 at 11:47 PM, Shakir (MCS) : Checking June 30, 2025 at 11:48 PM, Shakir (MCS) : Yes, all the carrier still on hold. Thank you June 30, 2025 at 11:49 PM, Shakir (MCS) : @Nagy Tibor please check June 30, 2025 at 11:53 PM, 김수민 : Please check how many hold plates are in the ca 72 warehouse June 30, 2025 at 11:53 PM, Shakir (MCS) : Checking June 30, 2025 at 11:56 PM, 김수민 : Also please tell me why it is on hold, is it locked on RTD? July 1, 2025 at 12:11 AM July 1, 2025 at 12:11 AM, Shakir (MCS) : Below plates are in Hold which is stocked at C1STKC72. MLC2061 MLC6008 2250 3150 3110 2183 4213 4211 4189 3220 3063 3098 6034 2138 2247 3005 Thank you July 1, 2025 at 12:15 AM, 김수민 : Please confirm the reason too July 1, 2025 at 12:19 AM, Shakir (MCS) : Total CA and AN 50+ plates on hold state. we checked, the hold state can be released for (no duplicated magazines found). Mostly plates on hold Due to duplicated status of MGZ hold exists but after confirmation,it can be released. Thank you. July 1, 2025 at 12:39 AM, 지석범PM (이반차FA) : @김수민 @김동섭 바코드 정상적으로 읽었는데, LD,UD Req 응답이 없습니다. 2-9 우측, 3-5 우측,3-9 좌측 모두 agv 바코드는 정상 리딩 했는데 지금 확인이 가능할까요? July 1, 2025 at 12:42 AM, 김수민 : @KIM SEYEON [김세연]_FA @정다은 @심재훈 @지석범PM (이반차FA) 후창고 RTD단에서 QA홀드로 스택 반송 불가 자재로 이송이 안되고 있습니다. 수동으류 플레이트 꺼내서 실물 확인 시 MES 노칭-VD-수분검사까지 모두 정상 확인 되는데 조치가능 부서 확인 부탁드립니다 MLC4189 MLC2128 MLC4211 MLC4213 MLC6008 MLC2183 MLC2250 MLC2177 MLC3220 July 1, 2025 at 12:43 AM, KIM SEYEON [김세연]_FA : @Shakir (MCS) any problem at RTD site? July 1, 2025 at 12:43 AM, KIM SEYEON [김세연]_FA : 그런데 QA홀드이면 품질에서 홀드 풀어줘야 하는것 아닌가요? July 1, 2025 at 12:46 AM, Shakir (MCS) : Sir we checked there is no duplicate magazine with this plates. Which cause hold status. July 1, 2025 at 12:48 AM, 김수민 : @KIM SEYEON [김세연]_FA 해당 플레이트 메거진 실물 확인했고 MES 정보 모두 이상없었습니다. July 1, 2025 at 12:49 AM, 지석범PM (이반차FA) : @Shakir (MCS) please delete job for VD CA Chamber 6-8, 2-4, 3-9, 3-5, 4-9 there is no response about pio signal July 1, 2025 at 12:49 AM, KIM SEYEON [김세연]_FA : 잠시만요 박태영 피엠님 에게 문의해 보겠습니다 July 1, 2025 at 12:49 AM, Shakir (MCS) : Working on it July 1, 2025 at 12:51 AM, Anita Mirosnicsenko : @Shakir (MCS) Hello! The material has been waiting at the port for a long time, but the AGV is not picking it up. Could someone please check what the issue is? Thank You very much! (Line STK 6-5-4) July 1, 2025 at 12:54 AM, Shakir (MCS) : Could you provide port id and CA or AN July 1, 2025 at 12:55 AM, Anita Mirosnicsenko : Sorry, it’s CA material. July 1, 2025 at 12:57 AM, Shakir (MCS) : Provide me port id, As i see there is no CA material on the ST port. July 1, 2025 at 12:59 AM, 정은탁 (Jung EunTak) : @FA VD Ca AGV #8 Error. Please Check. July 1, 2025 at 1:00 AM, Shakir (MCS) : @Fa Check agv 03 VD CA, Thanks July 1, 2025 at 1:04 AM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 231, CA: 192 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 03, Ca: 03 Post STK > Stacking:- • An: 176, Ca:24 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 00/60/06/126/08 VD CA (UD/Drying/LD/Wait/OOS) 00/92/94/01/04) Thank you July 1, 2025 at 1:05 AM, Shakir (MCS) : @FA Please check E0STKA51_C01 Load over size error. Thank you July 1, 2025 at 1:07 AM, KIM SEYEON [김세연]_FA : @Shakir (MCS) RTD holds these plates? due to QA hold? July 1, 2025 at 1:09 AM, P.Bence A SSL : L4 stacking delete LR request thank you July 1, 2025 at 1:10 AM, Shakir (MCS) : Checking sir July 1, 2025 at 1:10 AM, Shakir (MCS) : Checking July 1, 2025 at 1:12 AM, 이도형 (Lee) : @지석범PM (이반차FA) PM님 VD AGV 안되는거 후창고 다 투입해주세요 July 1, 2025 at 1:12 AM, 이도형 (Lee) : 양극 입니다. July 1, 2025 at 1:12 AM, Shakir (MCS) : There is No active LR for line 4 July 1, 2025 at 1:14 AM, Barta Rudi : @FA Vd ca 6-8 AGV3 stop ,please check, thank you July 1, 2025 at 1:14 AM, 이도형 (Lee) : 양극 VD 수분 스펙아웃 이슈로, VD 건조시간 양극만 5시간으로 변경 챔버 정지 후 레시피 변경 진행 하겠습니다. July 1, 2025 at 1:16 AM, 지석범PM (이반차FA) : 네 알겠습니다 July 1, 2025 at 1:17 AM, KIM SEYEON [김세연]_FA : @김수민 RTD Hold를 ITS써서 정식으로 풀어야합니다. 명일 주간에 진행하겠습니다. July 1, 2025 at 1:23 AM, Shakir (MCS) : We couldn’t find any information related to the QA hold. We checked the plates along with their MGZs and confirmed that there are no duplicates among them. July 1, 2025 at 1:29 AM, 정은탁 (Jung EunTak) : Please Check. July 1, 2025 at 1:30 AM, 김수민 : 피엠님 사유는 확인이 가능할까요? July 1, 2025 at 1:33 AM, KIM SEYEON [김세연]_FA : 사유는 확인해보겠습니다 July 1, 2025 at 1:34 AM, 이도형 (Lee) : @지석범PM (이반차FA) PM님 양극 챔버에서 AGV 수신 에러 챔버 공유 부탁드립니다 July 1, 2025 at 1:35 AM, 이도형 (Lee) : 지속적인으로 발생하는 챔버 확인 부탁드립니다. July 1, 2025 at 1:35 AM, 지석범PM (이반차FA) : VD CA 2-4, 3-5, 3-9, 4-9, 6-8 입니다. July 1, 2025 at 1:37 AM, 이도형 (Lee) : 오류발생 AGV 번호도 가르쳐 주세요. July 1, 2025 at 1:38 AM, Shakir (MCS) : @FA AGV01 CA reset alarm created transfer command to post Vd. Thank you July 1, 2025 at 1:47 AM, 지석범PM (이반차FA) : 전 호기가 다 발생하는데, 혹시 호기별로 발생 횟수가 필요하신 걸까요? 말씀 드린 호기 확인했을 때는, 바코드는 읽지만 PIO 응답이 없는 거라서요 내역은 뽑고 있습니다 잠시만요 July 1, 2025 at 1:49 AM, 이도형 (Lee) : 네 July 1, 2025 at 1:52 AM, 김수민 : Plz recheck July 1, 2025 at 1:54 AM, Shakir (MCS) : @FA please reset AGV04 error, Job initiated to Post VD STK. Thank you July 1, 2025 at 1:59 AM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 242, CA: 205 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 00, Ca: 21 Post STK > Stacking:- • An: 183, Ca:25 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 00/60/06/126/08 VD CA (UD/Drying/LD/Wait/OOS) 04/84/82/01/04) Thank you July 1, 2025 at 2:01 AM, 지석범PM (이반차FA) : 1호기- 2-4(12회),3-9(1회) 3호기- 6-8(44회) 4호기- 3-5(12회) 5호기- 2-4(16회),3-5(4회),4-9(2회) 7호기- 3-5(14회) 8호기- 4-9(30회) 9호기- 3-9(16회) 우선 말씀드린 다섯개 챔버에서 발생된 알람 횟수입니다. 그 외에 설비는 추가 확인이 필요하며, 말씀드린 횟수는 중복발생된 알람이 포함된 횟수입니다. July 1, 2025 at 2:02 AM, 김수민 : @지석범PM (이반차FA) 피엠님 Agv반송포트(13~20)에 풀메거진 플레이트 나와있는데 agv 픽업을 안해가고 있습니다. 현장 확인 부탁드립니다. July 1, 2025 at 2:05 AM, 김수민 : @FA PLZ CHECK CA VD 72WAREHOUS 16-17 PORT DATA MISS ERROR July 1, 2025 at 2:07 AM, Anita Mirosnicsenko : Line 6 STK AGV 1stopped please check! Thank you! July 1, 2025 at 2:24 AM, 김수민 : @KIM SEYEON [김세연]_FA @심재훈 @정다은 해당 플레이트 매거진은 문제확인을 위해 수동 출고 후 스택에 투입 진행했을때 정상적으로 생산 진행되었습니다. MLC4189 6228 1065 4453 1200 6537 6333 July 1, 2025 at 2:29 AM, Shakir (MCS) : @FA Please confirm Is there any plate located at C1STKC72_P09/P10. Thank you July 1, 2025 at 2:31 AM, 김수민 : @Shakir (MCS) MC3506 MC5516 MC1134 MC4460 Plz check the magazine location July 1, 2025 at 2:31 AM, Shakir (MCS) : Checking July 1, 2025 at 2:41 AM, Shakir (MCS) : Here’s the location magazines with plate id. MLC6020 (MC3506) located at C1STKC72(0105407) MLC4187 (MC5516)- C1STKC72(0205205) MLC2090 (MC1134) - C1STKC72(0105304) MLC0213 (MC4460) - C1STKC72(0205807) Thank you July 1, 2025 at 2:42 AM, 김수민 : Is it possible to search for available go to stack? July 1, 2025 at 2:43 AM, Shakir (MCS) : @Nagy Tibor please confirm , it blocked post VD STK ports, thanks July 1, 2025 at 2:43 AM, 이도형 (Lee) : @지석범PM (이반차FA) 양극 2-4 #13 AGV로 전창고 투입 해주십시오 July 1, 2025 at 2:43 AM, Shakir (MCS) : Checking July 1, 2025 at 2:47 AM, Shakir (MCS) : Yes, it is possible, I checked the available lot now all the four plate inside the lot available. Plates available for ST. Thank you July 1, 2025 at 2:50 AM, 김수민 : MC2176 MC1093 MC2521 MC6169 MC4289 Please check if the plate with the magazine is available for st. July 1, 2025 at 2:50 AM, 김수민 : Recheck July 1, 2025 at 2:53 AM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 249, CA: 206 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 02, Ca: 26 Post STK > Stacking:- • An: 197, Ca:43 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 01/52/06/146/08 VD CA (UD/Drying/LD/Wait/OOS) 00/80/72/01/04) Thank you July 1, 2025 at 3:08 AM, Yon Ko/연커/ : @MCS VD CAthode Would it be possible to cancel the jobs of AGV6 and AGV9 and redirect them to other chambers? Since 11PM, these two AGVs have been unable to drop off materials as the chambers are not reading them. We have tried multiple solutions, but the chamber error continues to occur. July 1, 2025 at 3:14 AM, Shakir (MCS) : This message was deleted. July 1, 2025 at 3:14 AM, Shakir (MCS) : MC2176 - Located at Pre VD STK71 (Not available for ST) MC1093 - Currently on way to NC 2-1 (Not available for ST) MC2521-Located at Pre VD STK71 (Not available for ST) MC6169 - Located at ST 5-9 (Processing) MC4289 - Available for ST Thank you July 1, 2025 at 3:15 AM, Shakir (MCS) : I will cancel the job and transfer it to STK, Thanks July 1, 2025 at 3:16 AM, Shakir (MCS) : @Yon Ko/연커/ could you please confirm this July 1, 2025 at 3:18 AM, Yon Ko/연커/ : All ports are empty July 1, 2025 at 3:19 AM, Shakir (MCS) : Thank you July 1, 2025 at 3:19 AM, Shakir (MCS) : @FA @Yon Ko/연커/ please reset AGV06 error, Job initiated to Post VD STK. Thank you July 1, 2025 at 3:21 AM, Shakir (MCS) : Do it same for AGV08 Thank you July 1, 2025 at 3:24 AM, Shakir (MCS) : @Yon Ko/연커/ Apply LR for VD 3-5 , 4-1 CA Half chamber. Thank you July 1, 2025 at 3:27 AM, Shakir (MCS) : @FA Please check AGV03 error VD CA. Thank you July 1, 2025 at 3:56 AM, Yon Ko/연커/ : @MCS VD CA chamber 4-9,6-8 is not working please cancel AGV2,5’s job. July 1, 2025 at 3:56 AM, Shakir (MCS) : Checking July 1, 2025 at 3:59 AM, 김수민 : Plz recheck July 1, 2025 at 4:01 AM, Shakir (MCS) : Job cancelled, Plates transferred to post vd STK ✅ Thank you July 1, 2025 at 4:01 AM, Shakir (MCS) : Checking July 1, 2025 at 4:05 AM, Shakir (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 277, CA: 201 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 03, Ca: 46 Post STK > Stacking:- • An: 195, Ca:37 ///////////////////////////////////////// VD AN (UD/Drying/LD/Wait/OOS) 08/48/04/142/08 VD CA (UD/Drying/LD/Wait/OOS) 00/88/26/01/04) Thank you July 1, 2025 at 4:07 AM, 김수민 : Tell me how many plates are in the CA 72 warehouse that cannot be transferred to ST July 1, 2025 at 4:07 AM, Shakir (MCS) : Checking July 1, 2025 at 4:30 AM, Shakir (MCS) : This 16 plates still on Hold, and not transferred to ST. July 1, 2025 at 4:32 AM, 김수민 : What is the reason for the hold? July 1, 2025 at 4:35 AM, Shakir (MCS) : Most probably QA hold, we checked other reason for hold like duplicate its clear. There is no duplicate found. Thank you July 1, 2025 at 4:36 AM, 연해리 : @권재환 PM님 GF Reel 창고 포트, RTV 포트는 비가동 잡았습니다. 현재 포트에 나와있는 자재가 조금 있어서 해당 자재까지는 카운트 부탁드립니다. 1F도 릴 컨베이어에 자재 매핑 풀어서 우선 나와있는 자재까지만 빼주시면 이후에는 안나옵니다. 실사 이후 원복하겠습니다 July 1, 2025 at 4:41 AM, Amgaa FA : @Shakir (MCS) An error occurs when trying to unload materials into a closed chamber agv6 with MLC2154 MLC2156 materials. VD CA. Pls check. Thank you July 1, 2025 at 4:42 AM, Shakir (MCS) : Checking July 1, 2025 at 4:42 AM, Shakir (MCS) : Chamber is closed? July 1, 2025 at 4:43 AM, Amgaa FA : The chamber is off. July 1, 2025 at 4:44 AM, 이주봉PM LEE JUBONG(FA) : @Shakir (MCS) MAGAZINE moisture measurement VD test not completed Why does it come out to the stack conveyor?! MLC4217, 2206, 4163, 6011 July 1, 2025 at 4:44 AM, Shakir (MCS) : Checking sir July 1, 2025 at 4:46 AM, Shakir (MCS) : Issue resolved ✅ Reset the AGV06 alarm. Thank you July 1, 2025 at 4:50 AM, Amgaa FA : agv10 also has the same error. pls check vd ca July 1, 2025 at 4:52 AM, Uyanga FA : @Shakir (MCS) please delete job for VD CA Chamber 2-6 2-4, there is no response about pio signal July 1, 2025 at 4:52 AM, Shakir (MCS) : Checking July 1, 2025 at 4:53 AM, 권재환 : 네 알겠습니다 나와있는 자재까지만 집계하겠습니다 July 1, 2025 at 4:54 AM, Shakir (MCS) : This message was deleted. July 1, 2025 at 4:55 AM, 김수민 : 1F 음,양극 릴 컨베이어에 나와있는 릴 자재 모두 출고했습니다 July 1, 2025 at 5:03 AM, 정은탁 (Jung EunTak) : @FA VD An 5-2(An#38) half chamber. please check. July 1, 2025 at 5:03 AM, Shakir (MCS) : Job initiated currently Post VD STK is OOS. July 1, 2025 at 5:09 AM, Uyanga FA : @Shakir (MCS) chamber 2-6 바코드를 스캔했지만 데이터를 얻을 수 없습니다. July 1, 2025 at 5:10 AM, Barta Rudi : @Shakir (MCS) No AGV is coming to the CA 3/3 machine to pick up the completed magazines — please check it, thanks. July 1, 2025 at 5:11 AM, Barta Rudi : The same issue is happening at 2/1, 3/1, 6/2, 5/1 and 6/1 as well. July 1, 2025 at 5:13 AM, Shakir (MCS) : Checking July 1, 2025 at 5:14 AM, 김수민 : @KIM SEYEON [김세연]_FA @심재훈 @정다은 해당 플레이트도 금일 같이 확인 부탁 드립니다. MES 정보 상 MLC4189(제조 문제 확인 필요로, 수동출고 후 스택 수동 투입진행)제외 수분값 입력 확인 되었습니다. July 1, 2025 at 5:15 AM, Shakir (MCS) : @FA Is there maintenance going on All the pre and Post VD STK on Offline Mode. Thank you July 1, 2025 at 5:16 AM, Shakir (MCS) : Currently STK is OOS, I will transfer to stk. July 1, 2025 at 5:17 AM, Shakir (MCS) : @Mr.Miti (미티) FA please confirm all job become alternated July 1, 2025 at 5:19 AM, Shakir (MCS) : AGV02 assigned for 3/3 NC CA July 1, 2025 at 5:26 AM, Shakir (MCS) : I checked for MLC4217, MES data process segment id showing C2100, still on VD process. Abnormal case found. We will investigate more. Thank you July 1, 2025 at 5:51 AM, Ngoc zia : Vd an 3agv error July 1, 2025 at 6:03 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.01. 12+2/12+2 Tech, 1Sl, 1Sup. Overtime(0): Holiday(1): Czeilinger Krisztián Sick(0): Shift Change(0): --------------- Electrode(3): Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(3): Denkó János, Gerbovits Kevin, Boromisza Zoltán ----------- July 1, 2025 at 6:23 AM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) can you check available lot? July 1, 2025 at 6:33 AM, Gua/ IvancsaFa : @mcs Good morning, could you check VD CA Chamber 2-6. AGV bar code scanned but the chamber is not receiving. Thank you July 1, 2025 at 6:34 AM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 293 CA: 217 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 02 CA: 42 Post-Stock ➤ Stacking AN: 203 CA: 35 VD AN (Process Breakdown) UD: 00 Drying: 36 LD: 02 Wait: 146 OOS: 04 VD CA (Process Breakdown) UD: 54 Drying: 88 LD: 18 Wait: 01 OOS: 04 July 1, 2025 at 6:39 AM, duzzaman Md (MCS) : Had ACS issues. Vehicle departed. All good from MCS. Vehicle paused and resumed several times. July 1, 2025 at 6:41 AM, duzzaman Md (MCS) : Could you also please check the ports physically as its saying suitable autoport doesn't exist between port and transport machine. July 1, 2025 at 6:46 AM, Truong : Good morning everyone @FA NC AN AgV #5 error please come check July 1, 2025 at 6:54 AM, 최명운(CHOI MYOUNGWOON) : This message was deleted. July 1, 2025 at 6:55 AM, 최명운(CHOI MYOUNGWOON) : This message was deleted. July 1, 2025 at 6:56 AM, 최명운(CHOI MYOUNGWOON) : @MCS GF CA VD 2-6 MES 'Active Recipe Not Founds' message is displayed. Could you please check it? July 1, 2025 at 6:57 AM, 심재훈 : 자동화 물류 다 정상화 해주세요. @연해리 July 1, 2025 at 6:58 AM, Gua/ IvancsaFa : @mcs could you check VD CA Chamber 6-8. July 1, 2025 at 7:03 AM, duzzaman Md (MCS) : In MCS it says ' suitable autoport doesn't exist between port {0100403} and transport machine{C1STKC71}. Also, there were errors 'FORK1 LD/UD REQ NOT RECEIVED' July 1, 2025 at 7:06 AM, duzzaman Md (MCS) : Thers acrive job . AGV 2 is in error state. July 1, 2025 at 7:12 AM, Gua/ IvancsaFa : yes, on the display it shows chamber is not active and i asked vietnamese guy to active the chamber but he said dont use the chamber. that is why i am confused. July 1, 2025 at 7:14 AM, duzzaman Md (MCS) : Then, do you want me to send those back to the STK ? July 1, 2025 at 7:20 AM, Gua/ IvancsaFa : could you please cancel the job of agv2 July 1, 2025 at 7:24 AM, duzzaman Md (MCS) : Cancelled and sent back. July 1, 2025 at 7:33 AM, 이주봉PM LEE JUBONG(FA) : GF 순환물류 1~3라인쪽 MLC4217 MC1361 MC3232 MC1138 MC5299 MC4471 MC3035 MLC3166 MC6345 MC2397 MC6112 MC6062 MC4166 MC5063 MLC2206 MC5184 MC2175 MC3543 MC1520 MC1077 MC1164 MLC4163 MC4526 MC1450 MC1477 MC4097 MC5464 MC6549 MLC6011 MC3562 MC6264 MC4507 MC4337 MC4518 MC5203 July 1, 2025 at 7:35 AM, 이주봉PM LEE JUBONG(FA) : 수분측정 안됐는데 마감친 매거진 July 1, 2025 at 7:36 AM, 이주봉PM LEE JUBONG(FA) : 수분검사 되었으나, 마감안된채 스태킹 반송. 마감 필요 5라인 MLC3069 MC1143, 5313, 4448, 6022 MLC6049 MC2021, 1031, 2475, 5559, 6169 MLC4166 MC 1469, 4220, 5431, 1115, 6385, 1561 MLC3021 MC4399, 2164, 5127, 3369, 5056 MLC6001 MC1442, 1433, 5182, 1341, 1232 6라인 MLC2074 MC1072, 1428, 5255, 6358 MLC3152 MC4363, 6411, 6410, 3356, 1171, 1371 MLC3125 MC1243, 4373, 2574, 4348, 6201 July 1, 2025 at 7:37 AM, 박태영 : 이중에 몇개만 찾아봤는데 출고시에는 C3100에 수분검사, 반제품검사 모두 OK 였습니다. 출고후에 C2100으로 바뀌었습니다. July 1, 2025 at 7:39 AM, 박태영 : 혹시 3100에서 2100 으로 바꾼것이 제조에서 바꾸셨을까요? July 1, 2025 at 7:40 AM, 조수형팀장 SKO/FA운영팀 : 수분 검사 결괴가 나중에 업데이트 되었다는 얘긴가요? July 1, 2025 at 7:40 AM, 이주봉PM LEE JUBONG(FA) : 자동화는 정상화 시키겠습니다 July 1, 2025 at 7:41 AM, 박태영 : 수분검사까지 OK되어있어서 스태킹까지 출고를 했는데 이후에 재작업을 요청하신것 같은데요 July 1, 2025 at 7:41 AM, Lan Nhi : @FA Hello. Please check and remove the goods at machine 4-1 VD/AN for me. Thank you. July 1, 2025 at 7:44 AM, Gua/ IvancsaFa : @mcs could you please delete job of agv3 VD CA. chamber is not receiving. July 1, 2025 at 7:54 AM, Gua/ IvancsaFa : @mcs NC CA AGV#3 and 2 have materials and idle. please check it. July 1, 2025 at 7:55 AM, duzzaman Md (MCS) : Deleted and sent back. How about agv 1, it has similar situation July 1, 2025 at 7:56 AM, Gua/ IvancsaFa : yes, could you cancel the job of agv#1 July 1, 2025 at 7:56 AM, 조한진(Jin) : 해당 Plate M/Z 확인 노칭이력만 있고 V/D 이력은 없는것으로 확인됩니다. 해당 Plate 1~3Line 순환물류 컨베이어에 있어서 수동으로 빼야할것 같습니다. July 1, 2025 at 7:58 AM, duzzaman Md (MCS) : Done. Thank you July 1, 2025 at 8:00 AM, 박태영 : 6049는 매거진 5개, 4166은 조회안됨, 3021, 6001은 매거진 5개 입니다 스태킹으로 반송된후에 매거진정보 일부가 사라졌습니다. 출고시점엔 정상이었습니다 July 1, 2025 at 8:01 AM, Ngoc zia : @fa can u help pls. STKC72 crane error July 1, 2025 at 8:08 AM, Kovács Ágnes : Solved July 1, 2025 at 8:13 AM, 이주봉PM LEE JUBONG(FA) : 스택 스테이션까지 반송 후 스테이션에서 빼는게 좋을 것 같습니다. July 1, 2025 at 8:13 AM, Nandia FA : @mcs good morning could you check ST AN AGV#6. the port is full. thank you. July 1, 2025 at 8:16 AM, Sazzad Bhai SKon : If the port is full, we can abort the job. Is it C4STM030_P02? July 1, 2025 at 8:17 AM, Nandia FA : yes, it was the cathode side July 1, 2025 at 8:27 AM, 심재훈 : 이게 메거진 일부만 이럴 수가 있나요?? 6메거진 다 이슈가 있어야 하는게 아닌가요? July 1, 2025 at 8:28 AM, 심재훈 : 수분측정이 안되면 마감이 안됩니다. July 1, 2025 at 8:30 AM, 이주봉PM LEE JUBONG(FA) : 네 저도 그부분이 신기합니다;; ㄴ현장에서 삼구 전운조장, 조한진 주임 확인 했습니다. July 1, 2025 at 8:31 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carriers. C1STKA71 (0105201, 0200201, 0205201, 0100102) C1STKA72 (0105001, 0101701) July 1, 2025 at 8:33 AM, 전 운 (Jeon Woon) : 스태이션에 있던것들은 수분값은 입력이 되있었고 마감만 안된부분이였습니다. 원래 클로징이 안되면 안나와야되는게 맞는데 나온이유를 모르겠습니다.. July 1, 2025 at 8:39 AM, Sazzad Bhai SKon : @FA All of the magazines of this plate is duplicated. MLA6076 (C1STKA72, 0105502) : MA5140, 2472, 2279, 1315, 6551, 3280 Confirmation needed on site. July 1, 2025 at 8:39 AM, 심재훈 : 아니요..ㅠ July 1, 2025 at 8:43 AM, Teo : PM님. 어제 오후에 OH2ANCB와 오늘 새벽 OH2AVCC 계정으로 VD재작업 버튼을 누른 이력이 있습니다. VD재작업 버튼을 누르게되면 VD에 재투입 할수있는 상태로 변경하는데 그때 3100 -> 2100으로 공정 코드가 변경 되게 됩니다. July 1, 2025 at 8:57 AM, 이주봉PM LEE JUBONG(FA) : @조한진(Jin) 1라인 20호기 반송내렸습니다. July 1, 2025 at 8:57 AM, 조한진(Jin) : 네 확인하겠습니다. July 1, 2025 at 8:59 AM, Jun(정우준)_SKOH FA : ST 양극 순환물류 MLC0224 MC4374, 1406, 2525, 2258, 2125, 1068 MLC2134 MC3494, 3275, 2451, 6143, 3569, 3001 @전 운 (Jeon Woon) 이 매거진도 마감필요합니다. July 1, 2025 at 9:02 AM, 전 운 (Jeon Woon) : 마감 되어있습니다 July 1, 2025 at 9:03 AM, 이주봉PM LEE JUBONG(FA) : @조한진(Jin) 1라인 20호기 P02 ㄴ MLC6011 반송완료 1라인 20호기 P01 ㄴMLC2206 반송완료 1라인 16호기 P02 ㄴMLC4217 반송 중 July 1, 2025 at 9:05 AM, 이주봉PM LEE JUBONG(FA) : 1라인 12호기 P02 MLC4163 반송 중 July 1, 2025 at 9:09 AM, duzzaman Md (MCS) : This message was deleted. July 1, 2025 at 9:10 AM, 이주봉PM LEE JUBONG(FA) : @조한진(Jin) 1라인 20호기 P02 ㄴ MLC 3166 반송중 July 1, 2025 at 9:10 AM, duzzaman Md (MCS) : @FA PLEASE CHECK C1STKC71 P13,P14 ,P16, P18 PHYSICALLY. CARRIERS ARE NOT MOVING. THANK YOU July 1, 2025 at 9:13 AM, 전 운 (Jeon Woon) : 취외 완 July 1, 2025 at 9:14 AM, 전 운 (Jeon Woon) : 취외 완 July 1, 2025 at 9:15 AM, 박태영 : 현재 재작업 누르실때 반송 되고있는 자재는 다시 후창고 입고까지 매뉴얼 작업이 필요합니다. 지연 예상됩니다 July 1, 2025 at 9:24 AM, 조한진(Jin) : 취외 완료 했습니다. July 1, 2025 at 9:30 AM, 이주봉PM LEE JUBONG(FA) : 네 현재 스택 순환 컨베이어 자재 전부 조회 했고 반송 가능 자재로 잡힙니다. NC 반제품 검사 - 합격 VD 마감여부 - 마감완료 수분측정여부 - 측정완료 QA approved - 측정필요? ST 투입가능 여부 - 투입가능 @전 운 (Jeon Woon) QA approved - 측정필요??이건 무엇인지 문의 드립니다. @박태영 QA approved 측정필요인데 이게 반송 가능 자재로 잡히는게 맞나요? July 1, 2025 at 9:31 AM, 박태영 : 현재 출발시점과 조회시점 사이에 작업되어진 매거진 상태가 다른경우 입니다. July 1, 2025 at 9:33 AM, 전 운 (Jeon Woon) : 원래 QC에서 수분값 축정 및 반제품 후 approved를 누르는 버튼이있는데 그게 없어져서 상관없습니다. July 1, 2025 at 9:37 AM, 이주봉PM LEE JUBONG(FA) : 네 확인 감사합니다. July 1, 2025 at 9:38 AM, 이주봉PM LEE JUBONG(FA) : 그럼 현재 반송 자재들은 정상입니다. July 1, 2025 at 9:40 AM, 조한진(Jin) : @duzzaman Md (MCS) hello. Please Check Next Available Lot. Thank you. July 1, 2025 at 9:46 AM, 전 운 (Jeon Woon) : 3Line Ca 먼저 반송부탁드립니다. @이주봉PM LEE JUBONG(FA) July 1, 2025 at 9:46 AM, 이주봉PM LEE JUBONG(FA) : 네 지금 바로 반송해드릴게요! July 1, 2025 at 9:48 AM, duzzaman Md (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 310, CA: 229 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 03 Post STK > Stacking:- • An: 243, Ca:70 ///////////////////////////////////////// VD AN (UD/Drying/LD & Wait/OOS 00/16/57/08 VD CA (UD/Drying/LD & Wait/OOS 22/24/57/04 Thank you July 1, 2025 at 9:49 AM, 이주봉PM LEE JUBONG(FA) : @MCS From now on, I will change the ACS Stack 3LINE return destination. July 1, 2025 at 9:50 AM, Nandia FA : @mcs could you check ST CA AGV#5 the port is full. C4STM030_P02 thank you. July 1, 2025 at 9:52 AM, Lan Nhi : @FA Please add another chamber for machine 5-2 and 3-6 VD/AN. Thank you. July 1, 2025 at 9:57 AM, Sazzad Bhai SKon : VD CA 4-1 is half chamber July 1, 2025 at 9:57 AM, Lan Nhi : And AN July 1, 2025 at 9:59 AM, Lan Nhi : Please check that machine 4-1 has enough chambers. The goods are dry. VD/ AN July 1, 2025 at 9:59 AM, duzzaman Md (MCS) : Solved. Thank you July 1, 2025 at 10:00 AM, Sazzad Bhai SKon : Yes anode 4-1 , 5-2 are half chamber July 1, 2025 at 10:00 AM, Sazzad Bhai SKon : Cathode 4-1: drying finished? If so, we can transfer to post VD July 1, 2025 at 10:06 AM, Ngoc zia : Not yet July 1, 2025 at 10:11 AM, Lan Nhi : Yes, please add another chamber for 2 machines. Thank you. July 1, 2025 at 10:14 AM, Sazzad Bhai SKon : For AN 5-2 LR is active. But for AN 4-1, there is only 3 plates. So 1 plate must be removed manually July 1, 2025 at 10:15 AM, 전 운 (Jeon Woon) : 3Line 반송 끝나면 2Line 먼저 부탁드립니다. @이주봉PM LEE JUBONG(FA) July 1, 2025 at 10:16 AM, Lan Nhi : Yes i get is July 1, 2025 at 10:16 AM, 이주봉PM LEE JUBONG(FA) : 네네 July 1, 2025 at 10:42 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVA52_07_004 Data missmatch error Thank you July 1, 2025 at 11:10 AM, duzzaman Md (MCS) : This message was deleted. July 1, 2025 at 11:11 AM, duzzaman Md (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 317, CA: 249 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 01, Ca: 01 Post STK > Stacking:- • An: 233, Ca:58 ///////////////////////////////////////// VD AN (UD/Drying/LD & Wait/OOS/Idle 00/20/182/08/10 VD CA UD/Drying/LD & Wait/OOS/Idle 00/52/69/04/95 Thank you July 1, 2025 at 12:48 PM, 김동섭 : CA VD 3-5 장비이상으로 건조 안됨 언로딩 부탁드립니다 July 1, 2025 at 12:55 PM, duzzaman Md (MCS) : Its OOS now. Please send it manually July 1, 2025 at 12:57 PM, duzzaman Md (MCS) : Load completed at 11:46 for the chambers July 1, 2025 at 1:06 PM, 인제(Hwang) : Please move the plates of VD An 4-9 P01, P02 to the warehouse July 1, 2025 at 1:10 PM, 방혁 PM(Bang.Hyuk) FA : @duzzaman Md (MCS) can you check available lot for GF? July 1, 2025 at 1:12 PM, 김동섭 : GF CA VD 3-2 AGV STOP July 1, 2025 at 1:16 PM, duzzaman Md (MCS) : GF Next lot quantity available GF NC reel Available :- • AN: 313, CA: 276 Pre STK > Notching:- • An : 00 Ca: 00 Pre STK > VD:- • An: 00, Ca: 01 Post STK > Stacking:- • An: 196, Ca:55 ///////////////////////////////////////// VD AN (UD/Drying/LD & Wait/OOS/Idle 00/52/146/08/14 VD CA UD/Drying/LD & Wait/OOS/Idle 00/84/15/04/117 Thank you July 1, 2025 at 1:19 PM, Takács Ádám FA Tech : @mcs @termelés CA VD 6-10 gépbe nem fog bepakolni az AGV mert a P01 és P02 port le van tiltva ACS-ben. Ennek van oka? July 1, 2025 at 1:20 PM, Szücs Géza FT-B : @Debreczeni Ármin te erről tudsz valamit? July 1, 2025 at 1:20 PM, 김동섭 : CA VD 3-1 AGV STOP July 1, 2025 at 1:21 PM, Debreczeni Ármin : Nem tudok sajnos July 1, 2025 at 1:25 PM, duzzaman Md (MCS) : We confirm, in MCS/RTD, its in service July 1, 2025 at 1:27 PM, Takács Ádám FA Tech : Köszönöm az információt July 1, 2025 at 1:41 PM, Szücs Géza FT-B : @Debreczeni Ármin @Takács Ádám FA Tech Bazsi jelezte, higy azon a gépen a BCR olvasóval van valami baj, mintha nem kapna áramot sem. Az elméletben a VD géphez tartozik és az assys karbantartáshoz tartozik. July 1, 2025 at 1:42 PM, 김동섭 : CA VD 3-5 장비이상으로 건조 안됨 언로딩 부탁드립니다 July 1, 2025 at 1:42 PM, Debreczeni Ármin : Értesítek valakit July 1, 2025 at 1:42 PM, 방혁 PM(Bang.Hyuk) FA : @duzzaman Md (MCS) July 1, 2025 at 1:42 PM, Takács Ádám FA Tech : Termelési karbantartással karöltve újra indítottuk az egész VD gépet és így helyre állt a PLC kommunikáció az ACS-sel July 1, 2025 at 1:43 PM, Debreczeni Ármin : Akkor köszi July 1, 2025 at 1:45 PM, 방혁 PM(Bang.Hyuk) FA : 6-8 4-9 3-9 3-5 2-4 @김동섭 위의 호기 확인부탁드립니다 @JAEYOON KIM / CS July 1, 2025 at 1:46 PM, Ngoc zia : Nc ca robot 3 #agv8 error July 1, 2025 at 1:48 PM, 방혁 PM(Bang.Hyuk) FA : @김동섭 부장님 챔버 점검하는거 관련해서 @JAEYOON KIM / CS 이분이 연락 드릴겁니다. 업무간 참조 부탁드립니다 July 1, 2025 at 1:50 PM, duzzaman Md (MCS) : Job has been created, PM. Thank you! July 1, 2025 at 1:50 PM, 최명운(CHOI MYOUNGWOON) : @김현태 CA VD 4-9P01,02 화물 전창고로 넣었습니다. 4-9챔버 비어있습니다 July 1, 2025 at 1:50 PM, 김현태 : 감사합니다 July 1, 2025 at 1:57 PM, 김동섭 : CA VD2-9 P1,P2 플레이트 ID 매거진ID 없습니다 July 1, 2025 at 2:11 PM, Deepu Divan FA-Eng : @duzzaman Md (MCS) can you check available lot? July 1, 2025 at 2:11 PM, Ngoc zia : @rtd (3-3) #21 vd ca 3 chambers. Can h check pls July 1, 2025 at 2:16 PM, 김동섭 : P1 플레이트 없습니다. July 1, 2025 at 2:24 PM, duzzaman Md (MCS) : MLC4204 is currently on VC08, Job was terminated at 13:32 , I'm sending it back to the STK . Will also send another odd material to Stk. When its gone, please raise LR July 1, 2025 at 2:31 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 303, CA: 282 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 03 Post-Stock ➤ Stacking AN: 173, CA: 49 VD AN (Process Breakdown) UR: 00, Drying: 68, LR: 130, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 124, LR: 16, OOS: 04 July 1, 2025 at 2:32 PM, 김동섭 : CA VD 2-9 P1,P2 언로딩 부탁드립니다 July 1, 2025 at 2:34 PM, duzzaman Md (MCS) : Task initiated for P01 and P02. Kindly let me know if you'd like the same for P03 and P04 or not ? July 1, 2025 at 2:35 PM, 김동섭 : P3,P4는 정상 입니다 July 1, 2025 at 2:36 PM, duzzaman Md (MCS) : Thank you for confirming. July 1, 2025 at 3:06 PM, 김동섭 : CA VD 4-5 P2 플레이트 안착불량 입니다 AGV 재 안착 부탁드립니다 July 1, 2025 at 3:12 PM, Lan Nhi : @FA Hello. Please add another chamber for 5-2 VD/AN machine. Thanks. July 1, 2025 at 3:14 PM, Lan Nhi : Machine 4-1 has 4 pallets, the goods are dry. but not yet unloaded. Please check for me. July 1, 2025 at 3:15 PM, Lan Nhi : 4 pallet codes MLA 6099, MLA0242, MLA6128, MLA6085 July 1, 2025 at 3:52 PM, 김동섭 : CA VD 4-5 P2 플레이트 안착불량 입니다 AGV 재 안착 부탁드립니다 July 1, 2025 at 4:11 PM, 김동섭 : CA VD 4-5 P2 plate is not seated properly Please re-position the AGV July 1, 2025 at 4:13 PM, 박강민 : CA VD 1-9 앞 AGV #7 ERROR STOP July 1, 2025 at 4:21 PM, 박강민 : CA VD 2-6 앞 AGV #3 ERROR STOP July 1, 2025 at 4:26 PM, 김동섭 : CA VD 3-9 AGV #6 MES 메세지 56 Active Recipe Not Founds July 1, 2025 at 4:33 PM, Nandia FA : @mcs can you please send agv July 1, 2025 at 4:35 PM, Debreczeni Ármin : @duzzaman Md (MCS) Please share lot quantity July 1, 2025 at 4:35 PM, 김동섭 : CA VD 3-9 Chamber MES 메세지 56 Active Recipe Not Founds July 1, 2025 at 4:39 PM, 이주봉PM LEE JUBONG(FA) : @인제(Hwang) @김동섭 VD 챔버 알람발생 active Recipe not founds Ca 2-6 , 6-10 , 3-7 설비 투입이 불가합니다. 확인 요청 드립니다. July 1, 2025 at 4:40 PM, duzzaman Md (MCS) : @ACS Please help July 1, 2025 at 4:41 PM, Szücs Géza FT-B : @방혁 PM(Bang.Hyuk) FA @Kim Dongju(김동주)_FA Several VD machines have a recipe error, at the request of manufacturing we are also blocking several VD ports. July 1, 2025 at 4:41 PM, 김동섭 : CA VD 3-9호기도 같은 메세지 뜹니다 July 1, 2025 at 4:43 PM, Szücs Géza FT-B : witch VD ports to be need to disable? July 1, 2025 at 4:44 PM, duzzaman Md (MCS) : This message was deleted. July 1, 2025 at 4:45 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 320, CA: 294 Pre-Stk ➤ Notching AN: 09, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 05 Post-Stock ➤ Stacking AN: 144, CA: 18 VD AN (Process Breakdown) UR: 02, Drying: 80, LR: 110, OOS: 08 VD CA (Process Breakdown) UR: 25, Drying: 128, LR: 04, OOS: 00 July 1, 2025 at 4:51 PM, 방혁 PM(Bang.Hyuk) FA : 2-6 3-7 3-9 6-10 RMS 패치 문제로 VD설비에 자재투입 지연되고있습니다. July 1, 2025 at 4:52 PM, 방혁 PM(Bang.Hyuk) FA : 2-6 3-7 3-9 6-10 Material input to VD EQ is being delayed due to RMS patch problem. July 1, 2025 at 5:00 PM, 이주봉PM LEE JUBONG(FA) : 3-9 VD 건조시간이 4시간으로 되어있습니다. 참고부탁드려요 July 1, 2025 at 5:00 PM, 이주봉PM LEE JUBONG(FA) : 양극 July 1, 2025 at 5:02 PM, 이주봉PM LEE JUBONG(FA) : @인제(Hwang) 양극 6-10 도 4시간입니다. July 1, 2025 at 5:02 PM, 인제(Hwang) : 내용공유 완료했습니다 July 1, 2025 at 5:08 PM, Debreczeni Ármin : Agv didnt deliver CA material to line 3 stacking July 1, 2025 at 5:09 PM, 김현태 : VD CA AGV #5 error Thanks July 1, 2025 at 5:13 PM, 이주봉PM LEE JUBONG(FA) : 감사합니다 굿굿 July 1, 2025 at 5:15 PM, duzzaman Md (MCS) : There are 6 active jobs. 5 of them are below 5 mins. Everything is okay from MCS July 1, 2025 at 5:16 PM, 김현태 : @MCS VD CA 6-1 AGV only took one July 1, 2025 at 5:16 PM, Debreczeni Ármin : @Diana check few minutes later please July 1, 2025 at 5:19 PM, duzzaman Md (MCS) : Job has been created for the one which is left. July 1, 2025 at 5:20 PM, duzzaman Md (MCS) : @FA Please check C1CNV072_16_079 INV-01 RUN TIME OVER ERROR THANK YOU July 1, 2025 at 5:21 PM, 김현태 : Thank you July 1, 2025 at 6:02 PM, Natsag/ Ivansca FA : @MCS) ST AN AGV#10 idle. Please check Thank you! July 1, 2025 at 6:06 PM, VK (mcs) : Transport job created July 1, 2025 at 6:10 PM, VK (mcs) : @FA Please check Cathode reel STK C51 There is no error but cranes are not moving. July 1, 2025 at 6:12 PM, Chinges Fa : @MCS ST Cathode AGV#06 idle please check July 1, 2025 at 6:12 PM, VK (mcs) : @FA Please check Anode reel STK A51 C01 Ready off during forking. Also please check Anode reel STK A52 Area sensor detect error. July 1, 2025 at 6:14 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 0 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 1, 2025 at 6:15 PM, VK (mcs) : Transport job created July 1, 2025 at 6:26 PM, Anita Mirosnicsenko : Hello! Line 1 STK AGV#5 stopped, please check! Thank you!! July 1, 2025 at 6:44 PM, Zulaa/졸라/Ivancsa FA : @MSC Please check. C1CNV072_P24. Thank you. July 1, 2025 at 6:52 PM, VK (mcs) : The reason of this phenomenon is: Job created several times and terminated, but information remained in system. I canceled and new transfer command has been created. It will transfer soon. Thx July 1, 2025 at 6:54 PM, 은향(OH EUN HYANG) : @amir(mcs) please share available lot July 1, 2025 at 6:59 PM, Usukhuu /ivancsa FA : @mcs please delete job for AGV 01 in NC CA there is 4 magazine in the 1 /2 port 4 July 1, 2025 at 7:04 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 328 , CA: 315 Pre-Stk ➤ Notching AN: 13. , CA: 00 Pre-Stk ➤ VD AN: 02. , CA: 25 Post-Stock ➤ Stacking AN: 107. , CA: 00 VD AN (Process Breakdown) UR: 00, Drying: 72, LR: 08, OOS: 08 VD CA (Process Breakdown) UR: 00 , Drying: 160, LR: 00, OOS: 00 July 1, 2025 at 7:09 PM, Zulaa/졸라/Ivancsa FA : @MSC Please check. VD AN C1STKA71_ P19, P20. Thank you. July 1, 2025 at 7:11 PM, VK (mcs) : As I see carrier ID in port 20 is UNK, please check both sides of carrier and modify it. Thx July 1, 2025 at 7:28 PM, Zulaa/졸라/Ivancsa FA : We cannot fix UNK with our programm ,we dont have access to it. Plate id -MLA 6099. Thank you. July 1, 2025 at 7:33 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20 Carrier ID shows UNK, please modify it. Thx July 1, 2025 at 8:11 PM, 정다은 : @VK (mcs) Could you share current status? July 1, 2025 at 8:17 PM, 김지수PM(Gyuri)_FA : @manufacturing MLA6120(c1stka72, 0205807) UNKDUP-MLA6120(c1stka72, 0105001) These are duplicated carriers, please rack out and then change the barcode. Thanks July 1, 2025 at 8:19 PM, 김지수PM(Gyuri)_FA : + MLA6102(c1stka72, 0200301) UNKDUP-MLA6102(c1stka72, 0101701) July 1, 2025 at 8:21 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 341 , CA: 313 Pre-Stk ➤ Notching AN: 19. , CA: 13 Pre-Stk ➤ VD AN: 03. , CA: 61 Post-Stock ➤ Stacking AN: 94 , CA: 00 VD AN (Process Breakdown) UR: 08, Drying: 80, LR: 08, OOS: 08 VD CA (Process Breakdown) UR: 00 , Drying: 128, LR: 00, OOS: 00 July 1, 2025 at 8:34 PM, 정다은 : Could you share amount in post Stock -> stacking? (that waiting for moisture result) July 1, 2025 at 8:39 PM, VK (mcs) : Do you mean active load request for stacking? July 1, 2025 at 8:45 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20 Output H/S off. July 1, 2025 at 8:49 PM, P.Bence A SSL : @VK (mcs) Delete all LR job L1-2-3 stacking July 1, 2025 at 8:56 PM, VK (mcs) : All load requests cleared. July 1, 2025 at 9:03 PM, 정다은 : No, I mean plates in post warehouse but can’t transfer to ST July 1, 2025 at 9:33 PM, VK (mcs) : GF Post VD storage Require moisture inspection Anode: 02 Cathode: 46 July 1, 2025 at 9:33 PM, 정다은 : Thank you July 1, 2025 at 10:05 PM, Elena Dzhul : Please check AGV#3 L4/stk 16 July 1, 2025 at 10:23 PM, Victory : Hello, NC CA GF Could you assign the AGV 10 to send MGZ back the Chamber #52? TKS July 1, 2025 at 10:24 PM, Victory : #7 too July 1, 2025 at 10:28 PM, VK (mcs) : UR received from VD cathode 6/7 and now transport job created to Post-STK. If you want to check, I can cancel the job, but sending back material to machine is not good idea. It's better to transfer by system order. July 1, 2025 at 10:30 PM, Eduard SL Shift A : Line 6 AGV 7 stopped July 1, 2025 at 10:41 PM, VK (mcs) : @Fa Please check Anode Pre-STK A71 port 21(12003) It’s in manual mode . July 1, 2025 at 10:41 PM, Chinges Fa : MCS please check St cathode AGV8 Full magazine and port full delete job July 1, 2025 at 10:43 PM, VK (mcs) : Job cancelled July 1, 2025 at 10:43 PM, Chinges Fa : Thank you so much July 1, 2025 at 10:49 PM, Chinges Fa : MCS) please check ST Cathode AGV#8 idle July 1, 2025 at 10:50 PM, VK (mcs) : Job cancelled for AGV# 9 VD anode July 1, 2025 at 10:50 PM, VK (mcs) : Cathode July 1, 2025 at 10:52 PM, VK (mcs) : Done July 1, 2025 at 11:02 PM, 정다은 : @VK (mcs) could you share current status? July 1, 2025 at 11:02 PM, 정은탁 (Jung EunTak) : @FA VD An 5-2 half chamber. please check. July 1, 2025 at 11:02 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 343 , CA: 291 Pre-Stk ➤ Notching AN: 00 , CA: 00 Pre-Stk ➤ VD AN: 02 , CA: 117 Post-Stock ➤ Stacking AN: 104 , CA: 01 VD AN (Process Breakdown) UR: 00 , Drying: 116 , LR: 02 , OOS: 08 , waiting : 00 VD CA (Process Breakdown) UR: 12 , Drying: 64 , LR: 06 , OOS: 04 , waiting: 40 July 1, 2025 at 11:03 PM, 정다은 : @VK (mcs) waiting is wait for ULD ? July 1, 2025 at 11:04 PM, VK (mcs) : It’s waiting for moisture inspection in the post STK July 1, 2025 at 11:05 PM, VK (mcs) : LR received at 22:06 Material will deliver when they are available. July 1, 2025 at 11:30 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 21 (12003) Cargo not exists error. July 1, 2025 at 11:33 PM, P.Bence A SSL : @VK (mcs) Can you tell me how many CA chambers are waiting for Agv unloading? July 1, 2025 at 11:34 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 / RTV LTC1908 is not unloading material on the buffer port 10 for a while. July 1, 2025 at 11:36 PM, VK (mcs) : Active UR for cathode VD is 26 July 1, 2025 at 11:38 PM, Zulaa/졸라/Ivancsa FA : @ MSC Please check. Vd Ca chamber 6/7 error.Please make AGV number 10 go to the warehouse July 1, 2025 at 11:41 PM, VK (mcs) : Job cancelled for VD 6/7 AGV 10 jobs created on the request of operation’s to the VD 6/7 port 1 and 2 July 1, 2025 at 11:47 PM, Zulaa/졸라/Ivancsa FA : Vd Ca chamber 6/7 port 01, 02 no work. Agv #10 delete job and go to the warehouse. July 1, 2025 at 11:49 PM, VK (mcs) : Please tell me what was the situation? Right now job created to AGV 10 to the VD cathode 6/7 but according to FA team these ports are not working! July 1, 2025 at 11:50 PM, VK (mcs) : Please wait a moment, July 1, 2025 at 11:56 PM, VK (mcs) : AGV 10 transferring to Post-STK July 1, 2025 at 11:59 PM, VK (mcs) : @FA Please check it. issue still not solved and conveyor is full now. Thx July 2, 2025 at 12:13 AM July 2, 2025 at 12:13 AM, Zulaa/졸라/Ivancsa FA : Solved July 2, 2025 at 12:22 AM, 은향(OH EUN HYANG) : Cathode Natching Robot #3 is not moving! Please come quickly to Hungary. July 2, 2025 at 12:26 AM, 은향(OH EUN HYANG) : AN NC July 2, 2025 at 12:56 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 325 , CA: 286 Pre-Stk ➤ Notching AN: 00 , CA: 00 Pre-Stk ➤ VD AN: 02 , CA: 112 Post-Stock ➤ Stacking AN: 120 , CA: 00 VD AN (Process Breakdown) UR: 04 , Drying: 100 , LR: 02 , OOS: 08 , VD CA (Process Breakdown) UR: 07 , Drying: 68 , LR: 00 , OOS: 04 , July 2, 2025 at 1:07 AM, 이도형 (Lee) : @VK (mcs) @FA VD CA AGV #9 Please delete the task July 2, 2025 at 1:08 AM, 이도형 (Lee) : There is nothing in the chamber July 2, 2025 at 1:09 AM, VK (mcs) : UR for VD 6/7 is raised and after cancelling, again will create new one. July 2, 2025 at 1:09 AM, VK (mcs) : Do you know about carriers in ports 3 and 4? July 2, 2025 at 1:13 AM, 이도형 (Lee) : I just came and it's empty July 2, 2025 at 1:17 AM, VK (mcs) : Thanks for confirmation. Job cancelled July 2, 2025 at 1:22 AM, 이도형 (Lee) : @VK (mcs) @FA "Ca VD 3-9 at 18:08 and 5-1 at 18:07 are in chamber half process. Please check." July 2, 2025 at 1:26 AM, VK (mcs) : VD cathode 3/9 Transport job for ports 1 and 2 cancelled. Please apply LR again for empty ports VD cathode 5/1 After load request, RTD received load and unload complete report. Please also apply LR for empty ports. July 2, 2025 at 1:29 AM, Natsag/ Ivansca FA : @mcs VD CA chamber 6-7 empty. Please delete AGV#1 job. Thank you! July 2, 2025 at 1:30 AM, 이도형 (Lee) : Applied July 2, 2025 at 1:31 AM, VK (mcs) : It hasn’t job July 2, 2025 at 1:31 AM, VK (mcs) : Jobs assigned July 2, 2025 at 1:54 AM, Victory : VD CA GF #02(1-2) Pls assign AGV to remove MGZ in order to fix the chamber. Tks July 2, 2025 at 2:36 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 323 , CA: 277 Pre-Stk ➤ Notching AN: 00 , CA: 00 Pre-Stk ➤ VD AN: 00 , CA: 82 Post-Stock ➤ Stacking AN: 141 , CA: 17 VD AN (Process Breakdown) UR: 02 , Drying: 68 , LR: 12 , OOS: 08 , VD CA (Process Breakdown) UR: 47 , Drying: 92 , LR: 56 , OOS: 04 , July 2, 2025 at 2:39 AM, Nguyên : VD AN GF 38(5-2) AGV only put in 2 Balette Come check for me. Thank you July 2, 2025 at 3:08 AM, 이도형 (Lee) : VD Ca 5-8 #44 Right/Upper Plate Not Seated Alarm Technician inspection requested. July 2, 2025 at 4:45 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 313 , CA: 295 Pre-Stk ➤ Notching AN: 01 , CA: 00 Pre-Stk ➤ VD AN: 00 , CA: 51 Post-Stock ➤ Stacking AN: 142 , CA: 47 VD AN (Process Breakdown) UR: 03 , Drying: 96 , LR: 04 , OOS: 08 , VD CA (Process Breakdown) UR: 10 , Drying: 100 , LR: 84 , OOS: 04 , July 2, 2025 at 4:54 AM, Victory : VD CA GF #02(1-2) Pls assign AGV to remove MGZ in order to fix the chamber. Tks July 2, 2025 at 5:18 AM, VK (mcs) : @FA Please check Cathode Pre-STK C71 port 22 It’s out of service July 2, 2025 at 5:32 AM, VK (mcs) : @FA Please check it, many carriers are waiting in conveyor. Thx July 2, 2025 at 6:02 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(3) Oláh András , Kiss Balázs, Szabadi Miklós Assembly(6): GF: Novák Károly, Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 2, 2025 at 6:02 AM, Shakir (MCS) : @FA Please check C1CNV072_P17 is out of service. Thank you July 2, 2025 at 6:08 AM, Dariimaa/다리마/Ivancsa : Solved July 2, 2025 at 6:11 AM, Shakir (MCS) : @FA Please check C1CNV071_13_036 run time over error. Thank you July 2, 2025 at 6:13 AM, Shakir (MCS) : @FA Please check C1STKA71_P16_OP01 Data mismatch error. Thank you July 2, 2025 at 6:19 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 312, CA: 311 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03, CA:73 Post-Stock ➤ Stacking AN: 127, CA:12 VD AN (Process Breakdown) UR: 00 , Drying: 92 , LR: 06 , OOS: 08 , VD CA (Process Breakdown) UR: 00, Drying: 120, LR: 20, OOS: 08, July 2, 2025 at 6:20 AM, Dariimaa/다리마/Ivancsa : Solved July 2, 2025 at 6:39 AM, Nguyen Huy : @FA @MCS Good morning, pls send AGV to take out materials from chamber 1-2 VD CA and send it back to C72 warehouse, the technician need to fix this one, thank you July 2, 2025 at 6:53 AM, Shakir (MCS) : Job initiated and AGV assigned ✅ Thank you July 2, 2025 at 7:18 AM, 인제(Hwang) : @방혁 PM(Bang.Hyuk) FA GF VD An 후창고M02 port쪽 PC 후창고SCS 접속이 불가능합니다. 확인 부탁드립니다! July 2, 2025 at 7:44 AM, 김정희(Jeong hee FA) : 로그인했습니다 July 2, 2025 at 7:45 AM, 인제(Hwang) : 감사합니다! July 2, 2025 at 7:47 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 301, CA: 316 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 87 Post-Stock ➤ Stacking AN: 167, CA: 05 VD AN (Process Breakdown) UR: 02, Drying: 88, LR: 04, Wait: 120, OOS: 08 VD CA (Process Breakdown) UR: 19, Drying: 136, LR: 12, Wait: 00, OOS: 00 July 2, 2025 at 8:02 AM, Shakir (MCS) : @Nguyen Huy UR job cancel for P04/03, please Press UR. 4-3 VD CA Thank you July 2, 2025 at 8:03 AM, Nguyen Huy : I'm on it July 2, 2025 at 8:03 AM, Nguyen Huy : UR pressed, pls check July 2, 2025 at 8:05 AM, Shakir (MCS) : No received July 2, 2025 at 8:05 AM, Shakir (MCS) : Not** July 2, 2025 at 8:08 AM, Nguyen Huy : VD op pressed it again, can you check ? July 2, 2025 at 8:09 AM, Shakir (MCS) : Now UR received successfully and Job initiated ✅ Thanks July 2, 2025 at 8:11 AM, Shakir (MCS) : Also please Press LR for VD CA 6-10 and 6-1 : Half Chamber. Thank you July 2, 2025 at 8:12 AM, Nguyen Huy : Ops are going July 2, 2025 at 8:16 AM, Sazzad Bhai SKon : @FA All of the magazines of this plate is duplicated. MLA6076 (C1STKA72, 0105502) : MA5140, 2472, 2279, 1315, 6551, 3280 Confirmation needed on site. @김지수PM(Gyuri)_FA could you please help? July 2, 2025 at 8:17 AM, 김지수PM(Gyuri)_FA : Okay I will check it! July 2, 2025 at 8:17 AM, Shakir (MCS) : LR received and Job initiated ✅ Thank you July 2, 2025 at 8:18 AM, Nguyen Huy : You're welcome July 2, 2025 at 8:27 AM, Shakir (MCS) : @FA Please check C1STKC72_P09 there is Data Mismatch error. Thank you July 2, 2025 at 8:28 AM, Dariimaa/다리마/Ivancsa : Solved July 2, 2025 at 8:29 AM, 조한진(Jin) : @Shakir (MCS) hello. Next Available check please. Thank you. July 2, 2025 at 8:30 AM, Shakir (MCS) : Checking July 2, 2025 at 8:32 AM, 김현태 : NC CA AGV #6 error Thanks July 2, 2025 at 8:35 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 303, CA: 313 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 57 Post-Stock ➤ Stacking AN: 171, CA: 38 VD AN (Process Breakdown) UR: 04, Drying: 80, LR: 02, Wait: 128, OOS: 08 VD CA (Process Breakdown) UR: 10, Drying: 144, LR: 40, Wait: 04, OOS: 00 July 2, 2025 at 8:40 AM, Nguyen Huy : @FA AGV #6 and #5 error near NC CA 5/1, pls check July 2, 2025 at 8:47 AM, 김동섭 : CA VD 4-5 P2 플레이트 안착불량 입니다. AGV로 재안착 부탁드립니다. July 2, 2025 at 8:52 AM, 김동섭 : CA VD 3-5 AGV ERROR DTOP July 2, 2025 at 8:56 AM, 방혁 PM(Bang.Hyuk) FA : @김지수PM(Gyuri)_FA 피엠님 확인부탁드립니다 July 2, 2025 at 8:56 AM, 김지수PM(Gyuri)_FA : 몽골 인원들한테 확인 요청 했습니다 July 2, 2025 at 8:59 AM, 인제(Hwang) : Can you tell me which equipment is OOS? July 2, 2025 at 8:59 AM, 인제(Hwang) : An VD July 2, 2025 at 9:00 AM, Shakir (MCS) : Equipment: 6-7 & 6-10 are OOS AN VD July 2, 2025 at 9:01 AM, 인제(Hwang) : Thank you so much July 2, 2025 at 9:54 AM, 김현태 : NC AN ROBOT #3 error Thanks July 2, 2025 at 10:08 AM, 전 운 (Jeon Woon) : Please Rechecking Thx. July 2, 2025 at 10:09 AM, Shakir (MCS) : Checking July 2, 2025 at 10:15 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 299, CA: 332 Pre-Stk ➤ Notching AN: 04, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 44 Post-Stock ➤ Stacking AN: 175, CA: 33 VD AN (Process Breakdown) UR: 04, Drying: 72, LR: 04, Wait: 132, OOS: 08 VD CA (Process Breakdown) UR: 04, Drying: 152, LR: 04, Wait: 04, OOS: 04 July 2, 2025 at 10:17 AM, 김지수PM(Gyuri)_FA : We checked that MA2279 was not stored in MLA6076 It was stored in MLA0144 only And now both of them located in C1STKA72 with hold status July 2, 2025 at 10:19 AM, 김현태 : NC CA AGV #1 error Thanks July 2, 2025 at 10:20 AM, Shakir (MCS) : @FA Please check C1STKA71_P09 there is port interface errror Thank you July 2, 2025 at 10:20 AM, Shakir (MCS) : @FA Please check E0CNVC51_08_049, Run time over error. Thank you July 2, 2025 at 10:23 AM, Shakir (MCS) : @CCS @Fa please check data mismatch at C1CNV072_P35 July 2, 2025 at 10:25 AM, Dariimaa/다리마/Ivancsa : Solved July 2, 2025 at 10:57 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 286, CA: 344 Pre-Stk ➤ Notching AN: 06, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 35 Post-Stock ➤ Stacking AN: 172, CA: 31 VD AN (Process Breakdown) UR: 00, Drying: 64, LR: 04, Wait: 132, OOS: 08 VD CA (Process Breakdown) UR: 28, Drying: 152, LR: 04, Wait: 04, OOS: 04 July 2, 2025 at 11:52 AM, 전 운 (Jeon Woon) : Please rechecking Thx July 2, 2025 at 11:57 AM, Shakir (MCS) : Checking July 2, 2025 at 12:01 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 300, CA: 363 Pre-Stk ➤ Notching AN: 14, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 33 Post-Stock ➤ Stacking AN: 158, CA: 39 VD AN (Process Breakdown) UR: 12, Drying: 60, LR: 04, Wait: 128, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 128, LR: 00, Wait: 00, OOS: 04 July 2, 2025 at 12:22 PM, Nguyen Huy : @FA @MCS Hello, could you pls take out materials at chamber 6-10 VD CA and re input it? There was some error with the plate and the chamber can't start, thank you July 2, 2025 at 12:25 PM, Shakir (MCS) : Working on it July 2, 2025 at 12:35 PM, Shakir (MCS) : Do you want to empty chamber or plate transfer to STK?? July 2, 2025 at 12:36 PM, Shakir (MCS) : @Nguyen Huy July 2, 2025 at 12:36 PM, Nguyen Huy : Can you transfer to another chamber ? If not, just send it back to C71 warehouse pls, thank you July 2, 2025 at 12:37 PM, Shakir (MCS) : I will send to STK72, Thanks July 2, 2025 at 12:38 PM, Nguyen Huy : Yes but the thing is, these plates hasn't dry yet, when you send to STK 72 it will become UNK plate July 2, 2025 at 12:39 PM, Shakir (MCS) : It will go back to STKC71 through overhead conveyor, July 2, 2025 at 12:40 PM, Nguyen Huy : Ah i get it now, thank you for the information, well then pls send back to STK 72 pls July 2, 2025 at 12:41 PM, Shakir (MCS) : You’re welcome Job initiated to STKC72 ✅ July 2, 2025 at 1:09 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) Delete the VD CA AGV#5 job and transfer it to STK. July 2, 2025 at 1:09 PM, Shakir (MCS) : On it July 2, 2025 at 1:13 PM, Shakir (MCS) : I cancelled the job for AGV05 but nothing on it to transfer. July 2, 2025 at 1:15 PM, Shakir (MCS) : Is there any issue with VD equipment 6-10 AGV not picking the plates?? July 2, 2025 at 1:15 PM, Shakir (MCS) : AGV01,AGV04 and AGV10 still assigned July 2, 2025 at 1:18 PM, Dariimaa/다리마/Ivancsa : AGV#5 received material but carrier is not reading. July 2, 2025 at 1:24 PM, Gua/ IvancsaFa : could you recreate job for agv to transfer 6-10 VD CA port 3. July 2, 2025 at 1:25 PM, Shakir (MCS) : Yes, Sure July 2, 2025 at 1:26 PM, Shakir (MCS) : Job created ✅ July 2, 2025 at 1:35 PM, 김동섭 : CA VD 6-10 P3 플레이트 존재 합니다. 언로딩 부탁드립니다 July 2, 2025 at 1:36 PM, Shakir (MCS) : AGV07 assigned ✅ July 2, 2025 at 1:37 PM, 김동섭 : Ca VD 6-10 AGV #7 STOP July 2, 2025 at 1:37 PM, Shakir (MCS) : @Gua/ IvancsaFa please check July 2, 2025 at 1:37 PM, Tetiana SL/D : Hello. Agv#4 stopped with error near Staсking Line 3/18 Please check @FA Thank you so much! July 2, 2025 at 1:39 PM, 전 운 (Jeon Woon) : @김지수PM(Gyuri)_FA @방혁 PM(Bang.Hyuk) FA 이거 AGV가 Fork로 뜰때 안착 불량 계속 나는거 같은데요 …….. July 2, 2025 at 1:40 PM, 전 운 (Jeon Woon) : 우선 4번 AGV고 18호기 앞 음극 Station 입니다. 아까 FA쪽 어느분이 점검 하시는거 같았습니다. July 2, 2025 at 1:42 PM, 김지수PM(Gyuri)_FA : 넵, 확인해보겠습니다. July 2, 2025 at 1:42 PM, 전 운 (Jeon Woon) : 우선 안착불량 Plate 정위치 해서 보냈습니다. July 2, 2025 at 1:51 PM, 김동섭 : Ca VD ROOM AGV #1 STOP July 2, 2025 at 2:03 PM, 김현태 : NC CA 4-3 자동화 아웃 포트 매거진 전도 발생 MA1216 1Mgz 폐기 하겠습니다. July 2, 2025 at 2:07 PM, 김지수PM(Gyuri)_FA : @fa please check the NC CA 4-3, magazine was inverted. Please check the buffer July 2, 2025 at 2:08 PM, 김지수PM(Gyuri)_FA : @Novák Károly F. A. July 2, 2025 at 2:08 PM, 카스텔 발라지 F.A. : Checking July 2, 2025 at 2:17 PM, 카스텔 발라지 F.A. : Solved July 2, 2025 at 2:18 PM, 김지수PM(Gyuri)_FA : Köszönöm szépen! July 2, 2025 at 2:19 PM, 김지수PM(Gyuri)_FA : @fa please check e0stkc52 July 2, 2025 at 2:21 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) ST AN AGV#10 idle. Please check Thank you! July 2, 2025 at 2:27 PM, Shakir (MCS) : Issue resolved, AGV10 started to move ✅ Thank you July 2, 2025 at 2:36 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 289, CA: 357 Pre-Stk ➤ Notching AN: 26, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 00 Post-Stock ➤ Stacking AN: 147, CA: 45 VD AN (Process Breakdown) UR: 04, Drying: 68, LR: 00, Wait: 136, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 152, LR: 16, Wait: 00, OOS: 12 July 2, 2025 at 2:55 PM, 김동섭 : CA VD 6-1 P4플레이트 언로딩 부탁드립니다. July 2, 2025 at 3:02 PM, 김지수PM(Gyuri)_FA : 건조이후 p04에 언로딩전 로드컴플리트 신호가 올라와서 자동반송이 불가능했습니다, VC03 가고있습니다. July 2, 2025 at 3:17 PM, Dariimaa/다리마/Ivancsa : @김동섭 VD AN chamber 2-3 fork1 LD/UD fail alarm pls check. July 2, 2025 at 3:44 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 305, CA: 294 Pre-Stk ➤ Notching AN: 20, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 05 Post-Stock ➤ Stacking AN: 144, CA: 64 VD AN (Process Breakdown) UR: 00, Drying: 76, LR: 04, Wait: 120, OOS: 08 VD CA (Process Breakdown) UR: 40, Drying: 140, LR: 12, Wait: 00, OOS: 08 July 2, 2025 at 4:12 PM, Shakir (MCS) : @Nguyen Huy VD cathode 6/1 After load request, RTD received load and unload complete report. Half Chamber Please apply LR for empty ports. Thank you July 2, 2025 at 4:32 PM, Nguyen Huy : I'm on it July 2, 2025 at 4:35 PM, 김지수PM(Gyuri)_FA : @fa Please check c1stka71 thanks July 2, 2025 at 4:40 PM, Sazzad Bhai SKon invited MCS/RTD System. July 2, 2025 at 4:46 PM, 전 운 (Jeon Woon) : 이거 또 발생했습니다. 똑같은 4번 AGV이고 3-10호기 An Station입니다. Fork 전진 위치 안맞아서 Plate 뜨고 안으로 들어가면서 Plate 미끄러 지는거 같습니다. 이거 조치 안되나요…? July 2, 2025 at 4:47 PM, 김지수PM(Gyuri)_FA : @카스텔 발라지 F.A. Mr magic hand, could you please check it? July 2, 2025 at 4:47 PM, 김지수PM(Gyuri)_FA : Seems like Align position of agv is not correct 🥲 July 2, 2025 at 4:53 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 315, CA: 390 Pre-Stk ➤ Notching AN: 10, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 145, CA: 93 VD AN (Process Breakdown) UR: 04, Drying: 76, LR: 08, Wait: 120, OOS: 08 VD CA (Process Breakdown) UR: 08, Drying: 128, LR: 04, Wait: 40, OOS: 08 July 2, 2025 at 5:47 PM, Mohammad Amir : @FA Please check C1STKA71_C01/C02 there is Area Sensor detect error ,it is blocking empty magazine delivery. Thank you very much! July 2, 2025 at 6:08 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 326, CA: 396 Pre-Stk ➤ Notching AN: 16, CA: 05 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 124, CA: 80 VD AN (Process Breakdown) UR: 00, Drying: 84, LR: 08, Wait: 100, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 116, LR: 04, Wait: 52, OOS: 00 Thank you very much! July 2, 2025 at 6:11 PM, 이도형 (Lee) : @정다은 PM님 VD CA Line 2 #15 (2_6) Water content: 180,2 ppm ❌ VD CA Line 3 #24 (3_6) Water content: 175,1 ppm ❌ VD CA Line 4 #28 (4_1) Water content: 223,3 ppm ❌ #34 (4_7) Water content: 198,9 ppm ❌ VD CA Line 5 #38 (5_2) Water content: 176,0 ppm ❌ #39 (5_3) Water content: 189,9 ppm ❌ 금일 건조 건 입니다 July 2, 2025 at 6:13 PM, Sazzad Bhai SKon : @FA @manufacturing @CIM Please don't hesitate to call this number @FA System Technician in case there is urgent request related to MCS RTD. Any day anytime (24/7) Thank you. July 2, 2025 at 6:14 PM, Sazzad Bhai SKon : @MCS/RTD System July 2, 2025 at 6:17 PM, 정다은 : 네 잠시만요 어떻게 진행할지 말씀드리겠습니다 July 2, 2025 at 6:34 PM, Hữu Thắng : @MCS Can you please check LR NC CA 3/2 . There’s no empty magazines . Thanks July 2, 2025 at 6:34 PM, Mohammad Amir : @FA Please make C1STKA71_P14/13 ports in auto mode , currently it is in manual mode and it is blocking materials dilevery to VD AN 3-5. Thank you very much! July 2, 2025 at 6:35 PM, Mohammad Amir : Sure, Checking! July 2, 2025 at 6:37 PM, Mohammad Amir : Good evening, For NC CA 3_2 P03 we have an active LR but there is no material available on O/P ports of Gantry as soon as empty magazine will be available it will go to NC CA 3-2. For 3_2 P04, Please press LR. Thank you very much! July 2, 2025 at 7:35 PM, QuangPhan : Good evening! @MCS Could you please check RTV - NC AN (E0CNVA52). We didn’t recieved material for a while. Thank you!. July 2, 2025 at 7:35 PM, Mohammad Amir : Good evening, Checking! July 2, 2025 at 7:37 PM, Mohammad Amir : Issue has been resolved ✅ You will start receiving the reels soon. I am monitoring. Thank you very much! July 2, 2025 at 7:49 PM, Mohammad Amir : Update:- Reels delivery has resumed ✅ Thank you very much! July 2, 2025 at 7:53 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 317, CA: 393 Pre-Stk ➤ Notching AN: 01, CA: 04 Pre-Stk ➤ VD AN: 01, CA: 01 Post-Stock ➤ Stacking AN: 115, CA: 75 VD AN (Process Breakdown) UR: 00, Drying: 80, LR: 12, Wait: 92, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 88, LR: 04, Wait: 36, OOS: 00 Thank you very much! July 2, 2025 at 8:19 PM, Mohammad Amir : @FA Please check C1CNV072_16_076/78 there is Run Time over error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 2, 2025 at 8:53 PM, Baek Hojong(백호종)FA : @Mohammad Amir Gf LOT QUANTITY Availability? July 2, 2025 at 8:53 PM, Mohammad Amir : Sure Sir,Checking! July 2, 2025 at 8:54 PM, Baek Hojong(백호종)FA : Sorry, I just checked July 2, 2025 at 8:56 PM, Mohammad Amir : Dear @Baek Hojong(백호종)FA Sir, GF Next Lot Quantity Availability GF NC Reel Available AN: 308, CA: 378 Pre-Stk ➤ Notching AN: 01, CA: 00 Pre-Stk ➤ VD AN: 02,CA: 00 Post-Stock ➤ Stacking AN: 101,CA: 112 VD AN (Process Breakdown) UR: 04, Drying: 96, LR: 08, Wait: 72 OOS: 12 VD CA (Process Breakdown) UR: 32, Drying: 96,LR: 16, Wait: 68, OOS: 00 Thank you very much! July 2, 2025 at 8:57 PM, Mohammad Amir : No problem Sir, I have shared updated as well. Thank you very much! July 2, 2025 at 8:58 PM, 이도형 (Lee) : @FA NC Ca RTV is stopped. Please check. July 2, 2025 at 9:00 PM, 이도형 (Lee) : 수분측정 재검사시 합격입니다 July 2, 2025 at 9:06 PM, 이도형 (Lee) : @Mohammad Amir C1STKC72 "Please share the long-term stay plate at the rear warehouse." July 2, 2025 at 9:06 PM, Mohammad Amir : Sure, checking. July 2, 2025 at 9:10 PM, Mohammad Amir : Hello, You would like to know the carrier id as well or just number? Thank you! July 2, 2025 at 9:16 PM, Lajos Gábor F.A. : @MCS Could you check E0CNVC52 RTV. LTC1282 located on RTV track 9050 ,but it not moving, dont have transfer command July 2, 2025 at 9:16 PM, Mohammad Amir : Sure, Checking July 2, 2025 at 9:18 PM, Mohammad Amir : Issue has been resolved ✅. RTV has started to move. Thank you very much! July 2, 2025 at 9:18 PM, Lajos Gábor F.A. : Thank you July 2, 2025 at 9:19 PM, Mohammad Amir : You are welcome! July 2, 2025 at 9:20 PM, 이도형 (Lee) : I would like to know the carrier number and magazine number." July 2, 2025 at 9:23 PM, Mohammad Amir : Sure I will start sharing in group of 10. There are several carrier in back warehouse ,They are in Post VD warehouse cause they have some issue for example some are Waiting because have hold ,some are Waiting because LOT count is less than 6 etc. July 2, 2025 at 9:28 PM, 이도형 (Lee) : "Could you let me know the reason for the delay?" July 2, 2025 at 9:29 PM, Mohammad Amir : Sure,I will . July 2, 2025 at 9:56 PM, Mohammad Amir : So following plates are waiting cause these plates are on Hold. MLC2250(MC3475,MC4176,2152,5119,5437,6065). MLC3220(MC2385,6329,2580,3393,4364,4551). MLC2177(MC3352,3166,2146,3288,2578,5522). MLC3098(MC2181,2501,4192,5391,6430,6141). MLC3110(MC2022,6580,4481,1237,4113,5156). MLC3150(MC3147,4125,1420,1313,1226,6193). MLC6008(MC2372,2085,5417,3361,4544,5445). MLC2183(MC4562,5211,4375,1013,3385,3527). MLC4211(MC5175,5025,4267,3171,6558,1486). MLC4213(MC6182,4204,2298,1222,3299,4339). Tha July 2, 2025 at 10:35 PM, Baek Hojong(백호종)FA : @Mohammad Amir GF 1F LOT Please upload it every 2 hours July 2, 2025 at 10:36 PM, Mohammad Amir : Sure Sir,I will updated every after two hours. Thank you very much! July 2, 2025 at 10:40 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 317, CA: 378 Pre-Stk ➤ Notching AN: 00, CA: 07 Pre-Stk ➤ VD AN: 03,CA: 02 Post-Stock ➤ Stacking AN: 98,CA: 114 VD AN (Process Breakdown) UR: 12, Drying: 100, LR: 08, Wait: 68 OOS: 12 VD CA (Process Breakdown) UR: 16, Drying: 104,LR: 08, Wait: 80, OOS: 00 Thank you very much! July 2, 2025 at 10:57 PM, Mohammad Amir : @FA Please check E0STKC51_C01 there is Ready off during Forking error. Thank you very much! July 2, 2025 at 11:00 PM, Mohammad Amir : @FA Please check STKC71 _C01 there is Load Oversize error. Thank you very much! July 2, 2025 at 11:02 PM, Mohammad Amir : Please take action on priority, empty magazine delivery has stopped. Thank you very much! July 2, 2025 at 11:26 PM, Mohammad Amir : This issue still exists, please check on Priority empty magazine delivery has stopped. Thank you very much! July 2, 2025 at 11:33 PM, QuangPhan : @MCS Could you please transfet these plates in VD AN 5-5 to KA72 . The chamber has Right / Top _NFB off State. We will start testing. Thank you. July 2, 2025 at 11:33 PM, Mohammad Amir : Sure, Checking! July 2, 2025 at 11:36 PM, Mohammad Amir : Jobs have been created successfully to travefer these materials to the STK. ✅ AGV#9 &#1 has been assigned successfully. I am monitoring. Thank you very much! July 3, 2025 at 12:08 AM July 3, 2025 at 12:08 AM, 정다은 : @Mohammad Amir could you share current status? July 3, 2025 at 12:08 AM, Mohammad Amir : Sure Checking! July 3, 2025 at 12:11 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 323, CA: 379 Pre-Stk ➤ Notching AN: 00, CA: 01 Pre-Stk ➤ VD AN: 01,CA: 01 Post-Stock ➤ Stacking AN: 96,CA: 125 VD AN (Process Breakdown) UR: 00, Drying: 112, LR: 12, Wait: 56 OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 108,LR: 16, Wait: 76, OOS: 00 Thank you very much! July 3, 2025 at 12:33 AM, Mohammad Amir : @FA Please check Robot #3 NC CA. Thank you very much! July 3, 2025 at 12:35 AM, Hữu Thắng : Can you check which chamber is OOS . Thank you July 3, 2025 at 12:35 AM, Hữu Thắng : VD AN July 3, 2025 at 12:36 AM, Mohammad Amir : Sure! July 3, 2025 at 12:36 AM, Mohammad Amir : Currently 6-7,5-5,6-10 VD AN chambers are OOS. Thank you very much! July 3, 2025 at 12:51 AM, Pavel : @FA CV02-MCP Error, Check, please Thank you July 3, 2025 at 12:52 AM, Mohammad Amir : @FA Please check C1CNV072_P36 there Is INV-01 Runtime Over error and it has blocked the stacking materials delivery. Please check the issue on priority. Thank you very much! July 3, 2025 at 1:38 AM, QuangPhan : @FA @AGV . VD An 4-6 the plates was wrong position . Plz use agv to fix it . thank you! July 3, 2025 at 1:54 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 316, CA: 375 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03,CA: 02 Post-Stock ➤ Stacking AN: 86,CA: 132 VD AN (Process Breakdown) UR: 00, Drying: 112, LR: 04, Wait: 28 OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 124,LR: 04, Wait: 80, OOS: 00 Thank you very much! July 3, 2025 at 1:57 AM, QuangPhan : @FA @AGV . VD An 3-5 the plates was wrong position . Plz use agv to fix it . thank you! July 3, 2025 at 2:28 AM, Mohammad Amir : @FA Please check E0CNVC52 _09_052 there is Data Mismatch error and it is blocking reels delivery. Please check this issue on priority. Thank you very much! July 3, 2025 at 2:29 AM, 이도형 (Lee) : @FA PM님 VD ca 후창고에 Hold 됐는지 확인 및 조치 부탁드립니다. 건조일 15일 지나면 재건조 해야합니다. 노칭, VD는 MES상 이상 없습니다 후창고 Hold 매거진 MLC2250 MC3475,4176,2152,5119,5437,6065 MLC3220 MC2385,6329,2580,3393,4364,4551 MLC2177 MC3352,3166,2146,3288,2578,5522 MLC3098 MC2181,2501,4192,5391,6430,6141 MLC3110 MC2022,6580,4481,1237,4113,5156 MLC3150 MC3147,4125,1420,1313,1226,6193 MLC6008 MC2372,2085,5417,3361,4544,5445 MLC2183 MC4562,5211,4375,1013,3385,3527 MLC4211 MC5175,5025,4267,3171,6558,1486 MLC4213 MC6182,4204,2298, July 3, 2025 at 3:07 AM, Baek Hojong(백호종)FA : @Mohammad Amir Can you tell me why the materials below are not transported? C1STKC72 MLC2250 MC3475,4176,2152,5119,5437,6065 MLC3220 MC2385,6329,2580,3393,4364,4551 MLC2177 MC3352,3166,2146,3288,2578,5522 MLC3098 MC2181,2501,4192,5391,6430,6141 MLC3110 MC2022,6580,4481,1237,4113,5156 MLC3150 MC3147,4125,1420,1313,1226,6193 MLC6008 MC2372,2085,5417,3361,4544,5445 MLC2183 MC4562,5211,4375,1013,3385,3527 MLC4211 MC5175,5025,4267,3171,6558,1486 MLC4213 MC6182,4204,2298,1222,3299,4339 July 3, 2025 at 3:18 AM, Mohammad Amir : Sir, These materials on Hold state from RTD side that is why it can not be transported to Stacking and the reason is that these carriers had some duplicated mgz that's why it is on Hold but now as i checked there is no duplicated mgz exist so these Hold status can be released. Unfortunately I don't have permission to release hold state. If you please write an IT tickets than our seniors will reflect on it. Thank you very much! July 3, 2025 at 3:47 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 305, CA: 279 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03,CA: 02 Post-Stock ➤ Stacking AN: 82,CA: 146 VD AN (Process Breakdown) UR: 00, Drying: 108, LR: 08, Wait: 52 OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 132,LR: 04, Wait: 76, OOS: 00 Thank you very much! July 3, 2025 at 4:16 AM, Mohammad Amir : @FA Please check E0CNVA52_RTV01 there is Run Time over error and it is blocking reels delivery. Thank you very much! July 3, 2025 at 4:56 AM, 김지수PM(Gyuri)_FA : @manufacturing Please check the sensor of CA VD 6-1p04, load complete was reported to MCS before unloading after drying process. Thanks @김동섭 @Mohammad Amir Please transfer the MLC6390 (ca vd 6-1p04) to c72. Thanks July 3, 2025 at 4:56 AM, Mohammad Amir : Good morning, Sure ! July 3, 2025 at 5:05 AM, Mohammad Amir : Good morning, Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 294, CA: 348 Pre-Stk ➤ Notching AN: 01, CA: 01 Pre-Stk ➤ VD AN: 01,CA: 01 Post-Stock ➤ Stacking AN: 84,CA: 122 VD AN (Process Breakdown) UR: 00, Drying: 96, LR: 08, Wait: 40 OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 140,LR: 00, Wait: 64, OOS: 00 Thank you very much! July 3, 2025 at 5:14 AM, Hữu Thắng : @MCS VD CA 5/4 The chamber has an error . Could you please transfer those magazines to KC72 . Thank you July 3, 2025 at 5:14 AM, Mohammad Amir : Sure, Checking! July 3, 2025 at 5:17 AM, Mohammad Amir : Jobs have been created to tranfer the materials inside the chamber 5-4 VD CA to the STK successfully ✅. AGV#2 & #3 has been assigned successfully. I am monitoring. Thank you very much! July 3, 2025 at 5:18 AM, Hữu Thắng : Thank you July 3, 2025 at 5:18 AM, Mohammad Amir : You are welcome! July 3, 2025 at 5:28 AM, QuangPhan : Hello! @FA NC AN 3/1 AGV #6 error. Thanks July 3, 2025 at 5:33 AM, Mohammad Amir : Update :- VD CA 5-4 has been successfully unloaded ✅,you may proceed with inspection. Thank you very much! July 3, 2025 at 5:58 AM, Dániel Hufnágel : Jó reggelt! FA "D" műszak:11/12 Overtime (0):- Sick (0):- Holiday (1):Martina Dávid Shift change(0): Elektróda:(4) Oláh András , Kiss Balázs, Szabadi Miklós, Novák Károly Assembly(4): GF: Kovács Szabolcs, Nagy Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Zsurbej Zsolt Hun Operators (2): Gombos Csaba Nagypál Gábor July 3, 2025 at 6:38 AM, MCS/RTD System : @FA Please check E0STKC51_M02 STP-01 Down cylinder error Thank you July 3, 2025 at 6:38 AM, Dániel Hufnágel : Just a moment please July 3, 2025 at 6:40 AM, 김현태 : NC CA AGV #8 error Thanks July 3, 2025 at 6:46 AM, MCS/RTD System : @FA PLEASE CHECK E0CNVA52_07_009 Data miss match error. Thank you July 3, 2025 at 6:47 AM, Szabolcs : Checking July 3, 2025 at 6:54 AM, Szabolcs : Done July 3, 2025 at 6:54 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 276, CA: 349 Pre-Stk ➤ Notching AN: 00, CA: 12 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 97, CA: 103 VD AN (Process Breakdown) UR: 04, Drying: 104, LR: 08, Wait: 68, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 124,LR: 00, Wait: 48, OOS: 00 Thank you ! July 3, 2025 at 7:30 AM, 김지수PM(Gyuri)_FA : @manufacturing Please take 4plates out from the C1CNV072_M04 Thanks July 3, 2025 at 8:04 AM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv072 16085 track Thanks July 3, 2025 at 8:09 AM, Dmytro Poluekto : Good morning everyone! @fa Please check the stacking conveyor near line 4/5/6. One plate got stuck, which caused a large queue to form. July 3, 2025 at 8:10 AM, 김지수PM(Gyuri)_FA : Remove the carrier manually or change the destination to M01 July 3, 2025 at 8:12 AM, 김지수PM(Gyuri)_FA : @fa please check E0STKA52 _P04 track thanks July 3, 2025 at 8:13 AM, Dmytro Poluekto : Will someone fix this issue? Because of it, material is not coming to the line properly at all! July 3, 2025 at 8:14 AM, 김지수PM(Gyuri)_FA : @Yon Ko/연커/ @Dariimaa/다리마/Ivancsa could you please help for this? July 3, 2025 at 8:53 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 238, CA: 319 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 121, CA: 114 VD CA (Process Breakdown) UR: 08, Drying: 108,LR: 04, Wait: 60, OOS: 00 VD AN (Process Breakdown) UR: 04, Drying: 108, LR: 00, Wait: 92, OOS: 08 Thank you ! July 3, 2025 at 8:55 AM, Dániel Hufnágel : A71 SMC member are working on crane July 3, 2025 at 8:55 AM, Dániel Hufnágel : @MCS/RTD System July 3, 2025 at 9:29 AM, 김동섭 : CA VD 5-4 하프챔버 입니다. 확인 부탁드립니다. July 3, 2025 at 9:37 AM, MCS/RTD System : No available material July 3, 2025 at 9:37 AM, Dariimaa/다리마/Ivancsa : @MCS/RTD System NC CA AGV#6 idle. Please check. July 3, 2025 at 9:41 AM, MCS/RTD System : It will move now. Thanks July 3, 2025 at 10:22 AM, Selem /Ivancsa FA : This message was deleted. July 3, 2025 at 11:25 AM, 최명운(CHOI MYOUNGWOON) : @JAEYOON KIM / CS GF NC Ca 다관절로봇#3 앞에서 발생했던 AGV#6 이동 시 설비와 접촉되는 문제가 동일하게 AGV#5에서도 발생했다고 신정현님에게 전달부탁드립니다. July 3, 2025 at 11:28 AM, Dmytro Poluekto : Same problem, please check July 3, 2025 at 11:32 AM, 박시우 : @FA Please come to NC AN #7 SW limit error is occured many times July 3, 2025 at 11:33 AM, 카스텔 발라지 F.A. : Unfortunately, currently we don't have permission to the AGV offset at the NC and VD area July 3, 2025 at 11:36 AM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from the chamber 4-1 VD CA and send it back to the warehouse, we need to rework them, thank you July 3, 2025 at 11:38 AM, Nguyen Huy : Chamber 2-6 also, thank you @FA July 3, 2025 at 11:41 AM, MCS/RTD System : There's active job from VD CA 4_1 to the STK already July 3, 2025 at 11:41 AM, MCS/RTD System : 2-6 is already empty July 3, 2025 at 11:42 AM, Nguyen Huy : Thank you for the information! July 3, 2025 at 12:10 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 210, CA: 279 Pre-Stk ➤ Notching AN: 12, CA: 11 Pre-Stk ➤ VD AN: 02, CA: 02 Post-Stock ➤ Stacking AN: 107, CA: 110 VD CA (Process Breakdown) UR: 00, Drying: 120,LR: 08, Wait: 84, OOS: 04 VD AN (Process Breakdown) UR: 16, Drying: 100, LR: 08, Wait: i4, OOS: 08 Thank you ! July 3, 2025 at 12:45 PM, Nguyen Huy : @FA Robot #3 NC CA robot operation MGZ detect sensor error, pls check July 3, 2025 at 12:47 PM, Szabolcs : Checking July 3, 2025 at 1:26 PM, 김지수PM(Gyuri)_FA : @fa please check e0stka51 Thanks July 3, 2025 at 1:31 PM, 김동섭 : CA VD 5-2 AGV ALARM STOP July 3, 2025 at 1:39 PM, 김지수PM(Gyuri)_FA : @fa please check e0stkc51 thanks July 3, 2025 at 1:45 PM, 김동섭 : CA VD ROOM AGV#1 ALARM STOP July 3, 2025 at 1:47 PM, 김동섭 : CA VD 3-4 앞 AGV ALARM STOP July 3, 2025 at 2:21 PM, 김지수PM(Gyuri)_FA : @Fa Please check E0stkc52_C01 Not moving, no Cargo detection on fork but can see some data on C01 July 3, 2025 at 2:25 PM, 김동섭 : CA VD 6-9 P1 플레이트 안착불량 입니다. AGV로 재안착 부탁드립니다. July 3, 2025 at 2:27 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA pls check. July 3, 2025 at 2:28 PM, 김지수PM(Gyuri)_FA : VC07 is goingg July 3, 2025 at 2:40 PM, Jun(정우준)_SKOH FA : @MCS/RTD System can you check available lot? July 3, 2025 at 2:43 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 193, CA: 238 Pre-Stk ➤ Notching AN: 07, CA: 02 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 129, CA: 82 VD CA (Process Breakdown) UR: 08, Drying: 120,LR: 28, Wait: 48, OOS: 08 VD AN (Process Breakdown) UR: 00, Drying: 100, LR: 08, Wait: 92, OOS: 08 Thank you ! July 3, 2025 at 2:52 PM, 김동섭 : CA VD 6-9 앞 AGV #7 ALARM STOP VD6-9 P1 재안착 완료 됨 July 3, 2025 at 2:55 PM, Dariimaa/다리마/Ivancsa : Please delete the AGV#7 job. July 3, 2025 at 2:56 PM, Tetiana SL/D : Hello. Agv#9 stopped with error near Staсking Line 3/13 Please check @FA Thank you so much. July 3, 2025 at 2:57 PM, MCS/RTD System : Done July 3, 2025 at 3:15 PM, 김동섭 : CA VD2-3 P2 플레이트 안착불량 입니다. AGV로 재안착 부탁드립니다 July 3, 2025 at 3:17 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check July 3, 2025 at 3:21 PM, 김지수PM(Gyuri)_FA : Vc10! July 3, 2025 at 3:44 PM, Dariimaa/다리마/Ivancsa : Please delete the VD CA AGV#10 job. July 3, 2025 at 3:45 PM, 박태영 : Please share now July 3, 2025 at 3:45 PM, 박태영 : Pre -> notching ca July 3, 2025 at 3:46 PM, MCS/RTD System : Done July 3, 2025 at 3:46 PM, Sazzad Bhai SKon : 1 only CA July 3, 2025 at 3:47 PM, Sazzad Bhai SKon : Anode: 12 July 3, 2025 at 3:49 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 186, CA: 244 Pre-Stk ➤ Notching AN: 12, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 115, CA: 86 VD CA (Process Breakdown) UR: 04, Drying: 148,LR: 08, Wait: 44, OOS: 08 VD AN (Process Breakdown) UR: 00, Drying: 100, LR: 08, Wait: 88, OOS: 08 Thank you ! July 3, 2025 at 4:01 PM, 김동섭 : CA VD5-6 앞 AGV ALARM STOP July 3, 2025 at 4:16 PM, Selem /Ivancsa FA : MCS Please delete the VD CA AGV #10 job July 3, 2025 at 4:21 PM, 김지수PM(Gyuri)_FA : @fa Please check c1stkc71 thanks July 3, 2025 at 4:23 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 3plates out from the C1CNV072_M04 July 3, 2025 at 4:25 PM, MCS/RTD System : There's no active job July 3, 2025 at 4:26 PM, MCS/RTD System : Is there any carrier currently on AGV ? July 3, 2025 at 4:29 PM, Selem /Ivancsa FA : No July 3, 2025 at 4:30 PM, Selem /Ivancsa FA : Thank you July 3, 2025 at 4:31 PM, Cao thi my linh : helo. eg AN GF 5-8 AGV only takes 3 trays, please check for me, thanks July 3, 2025 at 4:35 PM, Cao thi my linh : helo GF AN VD 3-4 AGV did not come to pick up the goods, please check for me, thanks July 3, 2025 at 4:47 PM, MCS/RTD System : Please raise LR after the other one is unloaded July 3, 2025 at 4:48 PM, MCS/RTD System : Don't have enough material. Thank you July 3, 2025 at 5:18 PM, 박강민 : GF AN VD 3-5 우측 하부 안착불량입니다 재안착 부탁드립니다 July 3, 2025 at 5:20 PM, 김지수PM(Gyuri)_FA : 9호기 할당받았습니다. July 3, 2025 at 5:41 PM, 김지수PM(Gyuri)_FA : Next lot plz. Thanks! July 3, 2025 at 5:44 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.07.03 Time: 18:00~ 06:00 1.Assy 이민재(Lee minjae) 김종원(Kim jongwon) July 3, 2025 at 5:45 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 205, CA: 228 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 01 Post-Stock ➤ Stacking AN: 131, CA: 68 VD CA (Process Breakdown) UR: 00, Drying: 152,LR: 04, Wait: 44, OOS: 12 VD AN (Process Breakdown) UR: 04, Drying: 100, LR: 24, Wait: 60, OOS: 08 Thank you ! July 3, 2025 at 5:48 PM, 김동섭 : AN VD 2-4 건조 실패 입니다.후창고 전송 부탁드립니다. July 3, 2025 at 5:49 PM, 김동섭 : AN VD 2-4 AGV #10 STOP ALARM July 3, 2025 at 5:49 PM, MCS/RTD System : There's active job July 3, 2025 at 5:51 PM, 김동섭 : AN VD 2-4 AGV #10 STOP ALARM July 3, 2025 at 5:58 PM, QuangPhan : Good evening! @FA NC AN AGV #5 error. Thanks July 3, 2025 at 6:08 PM, QuangPhan : @FA NC AN AGV #3 error. Thanks July 3, 2025 at 6:11 PM, Hữu Thắng : @FA NC CA Robot#3 has an error : DATA MISS Match . Please check it . Thank you July 3, 2025 at 6:14 PM, QuangPhan : @FA VD AN AGV #9 error. Thanks July 3, 2025 at 6:16 PM, 김태헌 : ST conveyer runtime over error please check. July 3, 2025 at 6:30 PM, QuangPhan : Good evening! @MCS VD AN 5-9 5-8 3-4 2-2 Please check LR half chamber. Thanks July 3, 2025 at 6:36 PM, Hữu Thắng : @MCS Can you please check LR NC CA 2/2 . There’s no empty magazine for machine 1:20min ago . Thank you July 3, 2025 at 6:38 PM, Hữu Thắng : @MCS. @FA Could you please check the RTV NC CA as well . As i see Material is not moving . July 3, 2025 at 6:39 PM, VK (mcs) : LR received at 17:01 and reply is no available material. July 3, 2025 at 6:42 PM, VK (mcs) : Anode VD 5/9 is full 5/8 we received unload complete report for port 1. 3/4 load request received at 18:10 2/2 is full. July 3, 2025 at 7:27 PM, VK (mcs) : @FA In the cathode reel STK C52, There is transport job for ( UNKDBS-250421104102A ) But remark is an Empty error - fork#1 empty release error Please check it. Thx July 3, 2025 at 7:32 PM, 이한웅(삼구) : An VD 회수 물류 확인 부탁드립니다 July 3, 2025 at 7:36 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 167 , CA: 234 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03 , CA: 14 Post-Stock ➤ Stacking AN: 115 , CA: 71 VD CA (Process Breakdown) UR: 00, Drying: 148 ,LR: 00, OOS: 12 VD AN (Process Breakdown) UR: 00, Drying: 112 , LR: 06 ,OOS: 08 July 3, 2025 at 8:45 PM, QuangPhan : @FA @AGV . VD An 2-6 and 2-7 the plates was wrong position . Plz use agv to fix it . thank you! July 3, 2025 at 9:14 PM, Zulaa/졸라/Ivancsa FA : Agv to fixed. July 3, 2025 at 9:26 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 154 , CA: 212 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03 , CA: 03 Post-Stock ➤ Stacking AN: 123 , CA: 111 VD CA (Process Breakdown) UR: 20, Drying: 112 ,LR: 22, OOS: 12 VD AN (Process Breakdown) UR: 07, Drying: 120 , LR: 00 ,OOS: 08 July 3, 2025 at 11:37 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 161 , CA: 205 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03 , CA: 03 Post-Stock ➤ Stacking AN: 137 , CA: 140 VD CA (Process Breakdown) UR: 00, Drying: 104 ,LR: 00, OOS: 12 Waiting: 56 VD AN (Process Breakdown) UR: 00, Drying: 104 , LR: 00 ,OOS: 08 Waiting:52 July 4, 2025 at 12:34 AM July 4, 2025 at 12:34 AM, Hữu Thắng : @FA NC AN Robot#7 stopped . Plz check it July 4, 2025 at 1:16 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 173 , CA: 216 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01 , CA: 00 Post-Stock ➤ Stacking AN: 133 , CA: 166 VD CA (Process Breakdown) UR: 02 , Drying: 108 ,LR: 04, OOS: 12 , Waiting: 88 VD AN (Process Breakdown) UR: 12 , Drying: 88 , LR: 08 ,OOS: 08, Waiting:52 July 4, 2025 at 1:45 AM, QuangPhan : @FA @AGV . VD An 1-4 the plates was wrong position . Plz use agv to fix it . thank you! July 4, 2025 at 2:13 AM, QuangPhan : @FA @AGV . VD An 4-6 and 5-5 the plates was wrong position . Please use AGV to fix it . thank you! July 4, 2025 at 2:34 AM, P.Bence A SSL : Line 3 stacking agv5 stop please check thank you . July 4, 2025 at 2:49 AM, Kaniz / Ivancsa FA : There have some issue with agv no.8 in notching cathode..can any technician come for solve the problem? July 4, 2025 at 3:27 AM, QuangPhan : Hello! @FA E0CNVA52 error . Tray Data mismatch. Thanks July 4, 2025 at 3:39 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 209 , CA: 217 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00 , CA: 02 Post-Stock ➤ Stacking AN: 156 , CA: 139 VD CA (Process Breakdown) UR: 00 , Drying: 104, LR: 02, OOS: 12 , Waiting: 72 VD AN (Process Breakdown) UR: 00 , Drying: 84, LR: 07,OOS: 08, Waiting:96 July 4, 2025 at 6:08 AM, Mohammad Amir : Good morning @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 240, CA: 212 Pre-Stk ➤ Notching AN: 20, CA: 14 Pre-Stk ➤ VD AN: 01 ,CA: 03 Post-Stock ➤ Stacking AN: 126,CA: 129 VD AN (Process Breakdown) UR: 00, Drying: 120, LR: 04, Wait: 72 OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 122,LR: 00, Wait: 76, OOS: 12 Thank you very much! July 4, 2025 at 6:12 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.04. 10+2/12+2 Tech, 1Sl, 1Sup. Overtime(1): Szabadi Miklós Holiday(2): Gerbovits Kevin, Böröcz Tamás Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, Szabadi Miklós --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János July 4, 2025 at 6:25 AM, 방혁 PM(Bang.Hyuk) FA : @MCS please check what happened with MLC5017 July 4, 2025 at 6:25 AM, 방혁 PM(Bang.Hyuk) FA : From CAVDC050-P01 July 4, 2025 at 6:25 AM, Mohammad Amir : Good morning Sir, Sure, Checking! July 4, 2025 at 6:34 AM, Mohammad Amir : Short summary:- At 12:51 on 3rd of July Unload request received successfully from CAVDC050. Job created from CAVDC050_P01 to STKC72_Z01. At 12:54 AGV #5_UP assigned. At 12:59 when AGV dropped MLC5017 at C2STKC72_P07 then at P07 carrier id read reported MLC5107 as Duplicated carrier (UNKDUP-MLC5017-250703125858A). Then this Duplicated carrier stored in C2STKC72(0204301) at 13:01. And original carrier MLC5017 data has been removed and it's location became N/A. Thank you very much! July 4, 2025 at 6:38 AM, Mohammad Amir : @FA Please check C1CNV071(Anode Side) it is OOS,it is blocking recovery materials. Thank you very much! July 4, 2025 at 6:40 AM, 방혁 PM(Bang.Hyuk) FA : @Szücs Géza FT-B July 4, 2025 at 6:46 AM, Szücs Géza FT-B : @Kovács Ágnes @Takács Ádám FA Tech légyszives nézzétek meg July 4, 2025 at 6:46 AM, Takács Ádám FA Tech : Úton vagyok July 4, 2025 at 6:48 AM, Böröczki Balázs : Az már készen van. July 4, 2025 at 6:49 AM, Böröczki Balázs : Csak ha éppen hibaelhárítást végzek, akkor közben nem szoktam nézni a telefonomat.🙂 July 4, 2025 at 6:51 AM, Mohammad Amir : @Böröczki Balázs Please check NC CA Robot #1. Thank you! July 4, 2025 at 6:58 AM, Böröczki Balázs : There's no problem. July 4, 2025 at 7:01 AM, Mohammad Amir : It had downtime from 6:47 till 6:55 however now it is resolved at 6:55. Thank you very much! July 4, 2025 at 7:40 AM, Mohammad Amir : @FA Please make E0STKC51_M05 into auto mode currently it is in Manual mode that's why one job is pending. Thank you very much! July 4, 2025 at 8:19 AM, Mohammad Amir : Good morning @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 209, CA: 177 Pre-Stk ➤ Notching AN: 30, CA: 20 Pre-Stk ➤ VD AN: 00 ,CA: 02 Post-Stock ➤ Stacking AN: 123,CA: 111 VD AN (Process Breakdown) UR: 04,Drying: 92, LR: 16, Wait: 96 OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 116,LR: 08, Wait: 72, OOS: 12 Thank you very much! July 4, 2025 at 8:25 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP carriers. UNKDUP-MLA6235 (C2STKA71, 0200303) July 4, 2025 at 8:37 AM, Mohammad Amir : @FA Please check E0STKC51_C01/C02 there is Light Curtain error and reels delivery has stopped. Thank you very much! July 4, 2025 at 8:59 AM, Mohammad Amir : @FA @Böröczki Balázs Please check E0CNVA52 _RTV01 it is OOS and reels delivery has been stopped. Thank you very much! July 4, 2025 at 9:05 AM, Mohammad Amir : @FA @Takács Ádám FA Tech Please check E0STKC51_C01/C02 there is Light Curtain error and reels delivery has stopped. Thank you very much! July 4, 2025 at 9:08 AM, Mohammad Amir : @FA Please check this issue still exists and because of this Anode reels delivery has stopped. Thank you very much! July 4, 2025 at 9:09 AM, Debreczeni Ármin : Agv's dont bring full magazines to L3 and didnt take empty ones July 4, 2025 at 9:10 AM, Mohammad Amir : Gold morning, Is it stacking line ? July 4, 2025 at 9:10 AM, Debreczeni Ármin : Sorry yes stacking July 4, 2025 at 9:10 AM, Mohammad Amir : I am checking! July 4, 2025 at 9:16 AM, Böröczki Balázs : Working on it. July 4, 2025 at 9:23 AM, Mohammad Amir : Now, AGV#10 ,#3 ,#2,#9 will perform UR task. And AGV#7 ,#8 and #6 will bring full magazines to line -3. Thank you very much! July 4, 2025 at 9:23 AM, 김동섭 : CA VD 2-1 P2 plate is not properly installed. Please re-install it with AGV. July 4, 2025 at 9:24 AM, Debreczeni Ármin : Thank you July 4, 2025 at 9:25 AM, Mohammad Amir : You are welcome! July 4, 2025 at 9:40 AM, Yon Ko/연커/ : Done. July 4, 2025 at 10:20 AM, 인제(Hwang) : Please move the plate in the VD Ca 6-5 chamber to the warehouse July 4, 2025 at 10:20 AM, Mohammad Amir : Sure, Checking! July 4, 2025 at 10:23 AM, Mohammad Amir : Jobs have been created successfully to transfer the materials from the chamber to The warehouse ✅. AGV# 2 & #5 has been assigned successfully. Thank you very much! July 4, 2025 at 10:24 AM, 인제(Hwang) : Thank you so much! July 4, 2025 at 10:24 AM, Mohammad Amir : You are welcome! July 4, 2025 at 10:30 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 193, CA: 171 Pre-Stk ➤ Notching AN: 25, CA: 22 Pre-Stk ➤ VD AN: 03 ,CA: 00 Post-Stock ➤ Stacking AN: 131,CA: 70 VD AN (Process Breakdown) UR: 00,Drying: 108, LR: 04, Wait: 96 OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 120,LR: 08, Wait: 20, OOS: 16 Thank you very much! July 4, 2025 at 10:30 AM, Mohammad Amir : Update:- CA VD 6-5 has been successfully unloaded ✅. Thank you very much! July 4, 2025 at 10:30 AM, 김현태 : NC CA AGV #5 Error Thanks July 4, 2025 at 10:35 AM, Mohammad Amir : @FA @Takács Ádám FA Tech Please check C1STKC72_C02 there is Load Oversize error and it is blocking CA stacking materials delivery. Please check the issue on priority. Thank you very much! July 4, 2025 at 10:45 AM, Takács Ádám FA Tech : Kész July 4, 2025 at 10:45 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 10:54 AM, Takács Ádám FA Tech : @Mohammad Amir hello! The empty tray on port E0STKA51_M03 does not move. LTA0695. could you check why? July 4, 2025 at 10:55 AM, Mohammad Amir : Sure, Checking! July 4, 2025 at 10:56 AM, Mohammad Amir : Please try Rackin again,now. Thank you very much! July 4, 2025 at 10:58 AM, Takács Ádám FA Tech : Köszönöm July 4, 2025 at 10:58 AM, Mohammad Amir : Szívesen! July 4, 2025 at 11:33 AM, Debreczeni Ármin : @Mohammad Amir please send me new lot quantity thank you July 4, 2025 at 11:34 AM, Mohammad Amir : Sure Checking! July 4, 2025 at 11:35 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 182, CA: 142 Pre-Stk ➤ Notching AN: 16, CA: 23 Pre-Stk ➤ VD AN: 00,CA: 03 Post-Stock ➤ Stacking AN: 130,CA: 69 VD AN (Process Breakdown) UR: 00,Drying: 108, LR: 08, Wait: 84 OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 120,LR: 12, Wait: 16, OOS: 16 Thank you very much! July 4, 2025 at 11:38 AM, 최명운(CHOI MYOUNGWOON) : @MCS Could you please delete the UR of GF NC Ca 3-3P01? July 4, 2025 at 11:38 AM, Mohammad Amir : Sure Checking July 4, 2025 at 11:39 AM, Mohammad Amir : Cancelled successfully ✅ Thank you! July 4, 2025 at 11:41 AM, Mohammad Amir : UR has received again,should I cancel again? Thank you! July 4, 2025 at 11:42 AM, 최명운(CHOI MYOUNGWOON) : Yes July 4, 2025 at 11:43 AM, Mohammad Amir : ✅ Thank you! July 4, 2025 at 11:51 AM, Mohammad Amir : @FA Please check NC CA Robot #2 . Thank you! July 4, 2025 at 11:54 AM, Kovács Ágnes : Solved July 4, 2025 at 11:54 AM, Mohammad Amir : Thank you very much! July 4, 2025 at 1:44 PM, Mohammad Amir : @FA Please check NC AN RTV01 it is OOS and it is blocking reels delivery. Thank you very much! July 4, 2025 at 2:21 PM, Mohammad Amir : @FA Please Check NC CA RTV01 it is OOS and blocking reels delivery. Thank you very much! July 4, 2025 at 2:26 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 163,CA: 109 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01,CA: 02 Post-Stock ➤ Stacking AN: 140,CA: 74 VD AN (Process Breakdown) UR: 08,Drying: 116, LR: 04,Wait: 84 OOS: 08 VD CA (Process Breakdown) UR: 04, Drying: 100,LR: 16, Wait: 24, OOS: 08 Thank you very much! July 4, 2025 at 2:26 PM, 인제(Hwang) : Please reset the password for the RTD “TEMP” ID July 4, 2025 at 2:27 PM, Mohammad Amir : Sure, Checking! July 4, 2025 at 2:28 PM, Mohammad Amir : Password has been restted successfully ✅. Please use "1234" to login and set new password. Feel free to inform me if you face further issues. Thank you very much! July 4, 2025 at 2:28 PM, 인제(Hwang) : Thank you! July 4, 2025 at 2:29 PM, Mohammad Amir : You are welcome! July 4, 2025 at 2:38 PM, Kovács Ágnes : Please delete the data from NC Ca RTV LTC0293. Thank you very much July 4, 2025 at 2:47 PM, Sazzad Bhai SKon : RTV is empty July 4, 2025 at 3:30 PM, Mohammad Amir : @FA Please check NC CA Robot #2 it is OoS. Thank you very much! July 4, 2025 at 3:30 PM, Mohammad Amir : @FA Please check NC AN Robot #1 it is OOS. Thank you very much! July 4, 2025 at 3:51 PM, 최명운(CHOI MYOUNGWOON) : That’s enough. July 4, 2025 at 4:05 PM, Betti B SL : L10 ST AGV-k meg által nem mennek tovább #5 és a #13 AGV-Ben üres magazinok vannak July 4, 2025 at 4:06 PM, Betti B SL : L10 ST AGVs will not go further than #5 and #13 AGVs have empty magazines July 4, 2025 at 4:06 PM, Mohammad Amir : Checking July 4, 2025 at 4:08 PM, Mohammad Amir : There was an issue with AGV#5 and it is blocking AGV#13 I have informed the FA in 1 F group. Thank you very much! July 4, 2025 at 4:10 PM, Mohammad Amir : @FA Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 4, 2025 at 4:12 PM, Mohammad Amir : Issue has been resolved ✅ AGV#&#13 has started to move. Thank you very much! July 4, 2025 at 4:14 PM, 김동섭 : CA VD 6-10 작업완료 수분측정 완료 언로딩 부탁드립니다. July 4, 2025 at 4:14 PM, Mohammad Amir : Checking,Sir. July 4, 2025 at 4:15 PM, 김동섭 : Agv 보내지 마세요 July 4, 2025 at 4:16 PM, 김동섭 : TEST용 July 4, 2025 at 4:16 PM, Mohammad Amir : Sure, Sir. For your information:- VD CA 6-10 is already empty. Thank you very much! July 4, 2025 at 4:29 PM, 전 운 (Jeon Woon) : Rechecking Plz July 4, 2025 at 4:29 PM, Mohammad Amir : Sure, Checking! July 4, 2025 at 4:32 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 154,CA: 75 Pre-Stk ➤ Notching AN: 00, CA: 11 Pre-Stk ➤ VD AN: 03,CA: 01 Post-Stock ➤ Stacking AN: 154,CA: 99 VD AN (Process Breakdown) UR: 00,Drying: 112, LR: 00,Wait: 96, OOS: 08 VD CA (Process Breakdown) UR: 20,Drying: 96,LR: 04, Wait: 64, OOS: 04 Thank you very much! July 4, 2025 at 5:19 PM, Mohammad Amir : @FA Please check and make C1STKC71_C01/C02 in active mode ,it is inactive without error and it is blocking materials recovery. Thank you very much! July 4, 2025 at 5:21 PM, Kovács Ágnes : Solved July 4, 2025 at 5:21 PM, Mohammad Amir : Thank you very much! July 4, 2025 at 5:40 PM, Mohammad Amir : @FA Please check E0STKC52_C01 there is Load Oversize error (Right). Thank you very much! July 4, 2025 at 5:51 PM, 이민재 : dayshift Samkoo FA "C" Schedule Date: 2025.07.04 Time: 18:00~ 06:00 1.Assy 이민재(Lee minjae) 김종원(Kim jongwon) July 4, 2025 at 5:55 PM, 김지수PM(Gyuri)_FA : @mcs Could you please check the c1stkc71 p13~p16, carriers were installed about 7hours ago, but agv didn't take those carriers until now July 4, 2025 at 5:57 PM, 김지수PM(Gyuri)_FA : Seems like agvs are carrying recently installed carriers first July 4, 2025 at 5:57 PM, VK (mcs) : Destination is out of service, July 4, 2025 at 5:58 PM, 김지수PM(Gyuri)_FA : Then could you please make those carriers to be assigned first if the vd request the load request July 4, 2025 at 6:14 PM, VK (mcs) : I will asked manufacturing team, and if they don't need it, then I will send them to STK. July 4, 2025 at 6:15 PM, VK (mcs) : @Manufacturing team There is transport job to VD cathode 6/8 but machine is out of service. Please check it. July 4, 2025 at 6:16 PM, VK (mcs) : @FA Please check Cathode reel STK C51 & 52 July 4, 2025 at 6:17 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, 1 Overtime ———————————— Electrode (2): Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5+1): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 4, 2025 at 6:17 PM, VK (mcs) : @FA please check Cathode Pre-STK C71 Load oversize error. July 4, 2025 at 6:32 PM, Spilka Sofia : Hello line 1 ST 14 AGV 5 stopped,pls check. Thanks July 4, 2025 at 6:37 PM, Zulaa/졸라/Ivancsa FA : Done July 4, 2025 at 6:41 PM, Spilka Sofia : Thanks July 4, 2025 at 6:50 PM, 김지수PM(Gyuri)_FA : @fa please check c1stkc71_c02 > mc safety relay off. Thanks July 4, 2025 at 7:12 PM, Spilka Sofia : Hello line 1 ST 19 AGV 10 stopped,pls check. Thanks July 4, 2025 at 7:30 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 136 ,CA: 69 Pre-Stk ➤ Notching AN: 00, CA: 16 Pre-Stk ➤ VD AN: 01 ,CA: 01 Post-Stock ➤ Stacking AN: 146 ,CA: 21 VD AN (Process Breakdown) UR: 00,Drying: 104 , LR: 06, Wait:84, OOS: 08 VD CA (Process Breakdown) UR: 04 ,Drying: 64 ,LR: 20 , Wait:112, OOS: 16 July 4, 2025 at 7:45 PM, Usukhuu /ivancsa FA : @mcs please remove the job from AGV #2 GF NC CA port has full magazine and stack July 4, 2025 at 7:46 PM, Usukhuu /ivancsa FA : port 1-1 GF NC CA July 4, 2025 at 7:47 PM, VK (mcs) : Job canceled July 4, 2025 at 8:00 PM, 원재 : @FA Please check NC Ca agv #4 July 4, 2025 at 8:12 PM, P.Bence A SSL : NC Cathode side Agv 4 stop please check thank you ! July 4, 2025 at 8:18 PM, Chinges Fa : MCS) please check NC Cathode AGV#02 idle July 4, 2025 at 8:25 PM, VK (mcs) : Transport job created July 4, 2025 at 8:27 PM, Chinges Fa : Thank you very much July 4, 2025 at 8:55 PM, 김지수PM(Gyuri)_FA : @fa Please check the c1stkc71_M02_op01 According to RTD abd scs, MLC0125 is remaining on that port. But cargo is not detected July 4, 2025 at 9:29 PM, P.Bence A SSL : Check please July 4, 2025 at 9:38 PM, 이한웅(삼구) : This message was deleted. July 4, 2025 at 9:38 PM, 이한웅(삼구) : @지석범PM (이반차FA) 안녕하세요. 이거 Wait은 어떤 상태를 말하는건가요? July 4, 2025 at 9:39 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 131 ,CA: 58 Pre-Stk ➤ Notching AN: 08, CA: 31 Pre-Stk ➤ VD AN: 02 ,CA: 03 Post-Stock ➤ Stacking AN: 133 ,CA: 98 VD AN (Process Breakdown) UR: 04,Drying: 96 , LR: 08, Wait:84, OOS: 12 VD CA (Process Breakdown) UR: 10 ,Drying: 100 ,LR: 14 , Wait:84, OOS: 08 July 4, 2025 at 9:44 PM, VK (mcs) : It indicates waiting for materials. July 4, 2025 at 9:46 PM, 이한웅(삼구) : thank you! July 4, 2025 at 10:38 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 Carrier on the RTV is not unloading to the port M10. July 4, 2025 at 11:07 PM, VK (mcs) : FA Please check , issue still not solved, and it cause supplying empty trays in electrode side goes to problem. Thx July 4, 2025 at 11:34 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 112 ,CA: 59 Pre-Stk ➤ Notching AN: 06 , CA: 13 Pre-Stk ➤ VD AN: 02 ,CA: 01 Post-Stock ➤ Stacking AN: 134 ,CA: 68 VD AN (Process Breakdown) UR: 00,Drying: 112 , LR: 02, Wait:76, OOS: 12 VD CA (Process Breakdown) UR: 12 ,Drying: 144 ,LR: 12, Wait:36, OOS: 08 July 4, 2025 at 11:35 PM, VK (mcs) : @Mr.Miti (미티) FA LTC0003 is almost waiting for unloading for 1.5 hours. Can you check it. Thx July 4, 2025 at 11:47 PM, Mr.Miti (미티) FA : From? July 4, 2025 at 11:48 PM, VK (mcs) : 22:13:12 July 5, 2025 at 12:03 AM July 5, 2025 at 12:03 AM, Tasnim / Ivancsa FA : Notching ( Cathode) Robot#3 is not working.. July 5, 2025 at 12:04 AM, Tasnim / Ivancsa FA : Please check.. July 5, 2025 at 12:28 AM, Spilka Sofia : Hello ST 1/9 AGV 3 stopped,pls check,thanks July 5, 2025 at 12:32 AM, Zulaa/졸라/Ivancsa FA : Solved July 5, 2025 at 12:34 AM, Spilka Sofia : Thanks July 5, 2025 at 1:02 AM, 원재 : Nc Ca VD agv #7 stop check please July 5, 2025 at 1:29 AM, Yana Ushkalo : 4/12 Is not working.The delivery service hasn't delivered anything since 18:00(Cathode) July 5, 2025 at 1:30 AM, Yana Ushkalo : AGV July 5, 2025 at 1:30 AM, VK (mcs) : Please tell me which area? Notching ? July 5, 2025 at 1:31 AM, Yana Ushkalo : STACKING July 5, 2025 at 1:33 AM, VK (mcs) : There is no load request, please apply LR July 5, 2025 at 2:26 AM, 이민재 : It was a sensor connector issue. solved. July 5, 2025 at 2:34 AM, Nadiia Arkhipova : Thanks July 5, 2025 at 3:01 AM, P.Bence A SSL : Check again please thank you . July 5, 2025 at 3:09 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 101 ,CA: 44 Pre-Stk ➤ Notching AN: 18 , CA: 00 Pre-Stk ➤ VD AN: 00 ,CA: 10 Post-Stock ➤ Stacking AN: 121 ,CA: 34 VD AN (Process Breakdown) UR: 03 ,Drying: 104 , LR: 08, Wait:88, OOS: 12 VD CA (Process Breakdown) UR: 09 ,Drying: 148 ,LR: 08, Wait:04, OOS: 08 July 5, 2025 at 3:36 AM, Nguyên : 2/1 CA NC GF AGV Error Come for me Thank you July 5, 2025 at 3:40 AM, Nadiia Arkhipova : Line 4 STK 12 AGV machine 5 stoped. Please check July 5, 2025 at 3:57 AM, 원재 : NC Ca VD agv#7 check please July 5, 2025 at 5:18 AM, 이한웅(삼구) : @VK (mcs) Can I check the last return history? This reel is in electrode hold status, so I’d like to understand why it was shipped out for notching. EA1P073F51D0211B EA2P081F6143211B July 5, 2025 at 5:19 AM, VK (mcs) : @FA Please check Cathode reel STK C51 port 2 It’s out of service. July 5, 2025 at 5:21 AM, 지석범PM (이반차FA) : Please check again July 5, 2025 at 5:28 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 105 ,CA: 03 Pre-Stk ➤ Notching AN: 30 , CA: 00 Pre-Stk ➤ VD AN: 03 ,CA: 02 Post-Stock ➤ Stacking AN: 119 ,CA: 56 VD AN (Process Breakdown) UR: 05 ,Drying: 100 , LR: 06, Wait:92, OOS: 12 VD CA (Process Breakdown) UR: 50 ,Drying: 116 ,LR: 36, Wait:00, OOS: 08 July 5, 2025 at 5:37 AM, VK (mcs) : Can you tell me carrier ID ? Or when these Lot released ? July 5, 2025 at 5:44 AM, 이한웅(삼구) : The carrier ID cannot be checked at the moment. The release time is 2025.06.29 at 00:36. EA1P073F51D0211B July 5, 2025 at 5:46 AM, VK (mcs) : This one job created by operations 2025.06.29 at 00:32:07 from Anode STKA51 to the E0STKA51-M09 (LTA1289) July 5, 2025 at 5:48 AM, 이한웅(삼구) : Thank you! July 5, 2025 at 5:51 AM, VK (mcs) : Second one also job created by operations from E0STKA52 to E0STKA51-M10 2025.06.29 at 1:08:27 (LTA1116) July 5, 2025 at 5:54 AM, MCS/RTD System : @FA PLEASE CHECK E0STKC51_P02 THIS PORT IS OOS. THANK YOU July 5, 2025 at 6:01 AM, Böröczki Balázs : Checking. July 5, 2025 at 6:31 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.05. 10+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Gerbovits Kevin Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Denkó János, Boromisza Zoltán --------- July 5, 2025 at 6:32 AM, Hữu Thắng : @MCS @FA RTV NC CA Tray ID Mismtach Error . Can you please check it . July 5, 2025 at 7:01 AM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please check the NG reels in E0STKC51? Reason of NG July 5, 2025 at 7:02 AM, 김지수PM(Gyuri)_FA : This message was deleted. July 5, 2025 at 7:03 AM, 김지수PM(Gyuri)_FA : Except LTC0765 and LTC1693 July 5, 2025 at 7:19 AM, Hữu Thắng : @MCS @FA RTV NC CA STP01-Doencynlibder Error . Can you plz check it . Thanks July 5, 2025 at 7:30 AM, Kovács Ágnes : Solved July 5, 2025 at 8:18 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 82 ,CA: 00 Pre-Stk ➤ Notching AN: 43 , CA: 01 Pre-Stk ➤ VD AN: 02 ,CA: 17 Post-Stock ➤ Stacking AN: 111 ,CA: 40 VD AN (Process Breakdown) UR: 32 ,Drying: 100 , LR: 24, Wait:00, OOS: 08 VD CA (Process Breakdown) UR: 04 ,Drying: 84 ,LR: 12, Wait:104, OOS: 12 July 5, 2025 at 8:28 AM, QuangPhan : Good morning! @FA NC AN AGV #8 error. Thanks. July 5, 2025 at 9:18 AM, Hữu Thắng : @FA VD CA 3-8 P04 5)3 plate is wrong position . Can you please use AGV to fix it . Thank you July 5, 2025 at 9:30 AM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. July 5, 2025 at 10:10 AM, 이도형 (Lee) : @FA VD Ca #2 AGV is stopped. Please check. July 5, 2025 at 10:13 AM, 이도형 (Lee) : @FA NC Ca RTV is stopped. Silent stop Please check. July 5, 2025 at 10:18 AM, 이도형 (Lee) : @FA PM님 조치 부탁드립니다. July 5, 2025 at 10:19 AM, Böröczki Balázs : Checking. July 5, 2025 at 10:58 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 72 ,CA: 00 Pre-Stk ➤ Notching AN: 27 , CA: 00 Pre-Stk ➤ VD AN: 03 ,CA: 08 Post-Stock ➤ Stacking AN: 89 ,CA: 54 VD CA (Process Breakdown) UR: 00 ,Drying: 128 ,LR: 36, Wait:00, OOS: 08 VD AN (Process Breakdown) UR: 00 ,Drying: 108 , LR: 08, Wait:88, OOS: 12 July 5, 2025 at 11:05 AM, Debreczeni Ármin : 0 CA reel is it true? July 5, 2025 at 11:07 AM, MCS/RTD System : Yes, 00 available. There are 13 but it's getting filtered July 5, 2025 at 11:08 AM, Debreczeni Ármin : Okay thank you July 5, 2025 at 11:18 AM, MCS/RTD System : @FA PLESE CHECK C1STKA72_P13/P14 Light curtain error. Thanks ! July 5, 2025 at 11:24 AM, Kovács Ágnes : Solved July 5, 2025 at 11:36 AM, Hữu Thắng : @MCS Due to VD CA 5/4 has an error . Could you please send these magazines to KC72 . Thank you July 5, 2025 at 11:38 AM, MCS/RTD System : Job created. Thank you July 5, 2025 at 11:40 AM, MCS/RTD System : Thank you. Please check E0CNVC51_08_52/53 Run time over error. Thank you July 5, 2025 at 11:41 AM, Kovács Ágnes : Solved July 5, 2025 at 11:45 AM, MCS/RTD System : Please check the same conveyor P01 port. It's OOS now July 5, 2025 at 11:46 AM, Kovács Ágnes : Solved July 5, 2025 at 12:09 PM, Hữu Thắng : @FA Could you please come to NC CA 5/2 . The belt coveryor C/V Outline wrong position it make magazine fall down . Can you check it . Thank you . July 5, 2025 at 12:19 PM, Hữu Thắng : Can you share it again . I would like to know how many Reel available for GF NC CA . Thank you July 5, 2025 at 12:24 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 81 ,CA: 00 Pre-Stk ➤ Notching AN: 13 , CA: 00 Pre-Stk ➤ VD AN: 00 ,CA: 46 Post-Stock ➤ Stacking AN: 89 ,CA: 16 VD CA (Process Breakdown) UR: 32 ,Drying: 104 ,LR: 12, Wait:00, OOS: 08 VD AN (Process Breakdown) UR: 00 ,Drying: 108 , LR: 12, Wait:84, OOS: 12 July 5, 2025 at 12:28 PM, Hữu Thắng : @FA VD CA AGV#7 stopped . Plz check it July 5, 2025 at 12:29 PM, Hữu Thắng : VD CA AGV#2 Line 4/4 has an error . Plz check it July 5, 2025 at 12:34 PM, 이도형 (Lee) : @FA @MCS Nc An agv full magazine check please 2-2 July 5, 2025 at 12:34 PM, MCS/RTD System : @FA PLEASE CHECK C1STKC71_P22 and C01 Port interface error. Thanks July 5, 2025 at 1:18 PM, 은향(OH EUN HYANG) : GF NC Robot #3 Please Come Here hungarian technology July 5, 2025 at 1:19 PM, Hữu Thắng : @FA VD CA Line 5/3 AGV#2 stopped . Can you please check it July 5, 2025 at 2:05 PM, Truong : @FA NC AN avg #4 error please come check July 5, 2025 at 2:26 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System could you please raise the priority of 12003, 12001 track (c1stka71) July 5, 2025 at 2:28 PM, Debreczeni Ármin : @MCS/RTD System please send lot quantity thank you July 5, 2025 at 2:29 PM, 김지수PM(Gyuri)_FA : @fa Please check 13003track (c1stkc71) > manual mode July 5, 2025 at 2:36 PM, MCS/RTD System : Increased earlier. Now, its normal July 5, 2025 at 2:38 PM, 김지수PM(Gyuri)_FA : I'm still increasing the priority because of c1cnv071. Thanks!! July 5, 2025 at 2:41 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 73 ,CA: 00 Pre-Stk ➤ Notching AN: 16 , CA: 00 Pre-Stk ➤ VD AN: 00 ,CA: 14 Post-Stock ➤ Stacking AN: 73 ,CA: 31 VD CA (Process Breakdown) UR: 12 ,Drying: 132 ,LR: 32, Wait:00, OOS: 12 VD AN (Process Breakdown) UR: 12 ,Drying: 96 , LR: 20, Wait:76, OOS: 12 July 5, 2025 at 3:01 PM, 김지수PM(Gyuri)_FA : @fa please check c1cnv072 thanks July 5, 2025 at 3:05 PM, Natsag/ Ivansca FA : Done July 5, 2025 at 3:06 PM, Hữu Thắng : Problem occurred . Could you please come to check it . Thanks July 5, 2025 at 3:08 PM, 김지수PM(Gyuri)_FA : @fa please check cncnv071 12016track July 5, 2025 at 3:38 PM, Böröczki Balázs : Checked. Belt tightened. July 5, 2025 at 4:03 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please increase the priority of 12003 12002track(c1stka71) July 5, 2025 at 4:04 PM, 김지수PM(Gyuri)_FA : Seems like has to increase these priority more than 5mins. Thanks July 5, 2025 at 4:08 PM, Natsag/ Ivansca FA : @MCS NC AN AGV#6 idle. Please check Thank you! July 5, 2025 at 4:14 PM, MCS/RTD System : Job has been initiated. Thank you July 5, 2025 at 4:31 PM, Hữu Thắng : Can you please share it again . July 5, 2025 at 4:34 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 49 ,CA: 00 Pre-Stk ➤ Notching AN: 21 , CA: 00 Pre-Stk ➤ VD AN: 01 ,CA: 23 Post-Stock ➤ Stacking AN: 67,CA: 45 VD CA (Process Breakdown) UR: 00 ,Drying: 120 ,LR: 20, Wait:00, OOS: 12 VD AN (Process Breakdown) UR: 04 ,Drying: 100 , LR: 24, Wait:80, OOS: 12 July 5, 2025 at 4:46 PM, QuangPhan : Hello! @MCS VD AN LR Job working on? Currently Warehouse A71 has 14 Full plates. Please check. Thanks July 5, 2025 at 5:10 PM, MCS/RTD System : There are active LR's July 5, 2025 at 5:59 PM, 이한웅(삼구) : @은향(OH EUN HYANG) 저희 매거진 이력 없다고 주신 MLA0061 이력 전부 있습니다. 전창고 투입해주세요 July 5, 2025 at 6:00 PM, VK (mcs) : @FA Please check Cathode reel conveyor C52 LYC0676 on the RTV is not unloading on the port M10 (9037) for a while. July 5, 2025 at 6:02 PM, VK (mcs) : @FA Please check Cathode VD conveyor C1CNV071 (13006) It’s in manual mode. July 5, 2025 at 6:03 PM, Chinges Fa : MSC please check NC Anode AGV#01 idle July 5, 2025 at 6:05 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 10 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Sopronyi Gábor Attila Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+2): Magyar Imre Nagy Tibor Bonnyai Ákos Vékony Ferenc Novák Károly Novák Zoltán ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 5, 2025 at 6:06 PM, VK (mcs) : It’s disconnected @FA please check it. July 5, 2025 at 6:10 PM, Usukhuu /ivancsa FA : @mcs please cancel the job for AGV#1 NC AN robot#3 is not working July 5, 2025 at 6:12 PM, Usukhuu /ivancsa FA : This message was deleted. July 5, 2025 at 6:13 PM, VK (mcs) : Order cancelled but it is assigned again for AGV 1. July 5, 2025 at 6:33 PM, P.Bence A SSL : @VK (mcs) please check L3 LR request We need anode full plate. July 5, 2025 at 6:34 PM, VK (mcs) : Stacking? July 5, 2025 at 6:35 PM, VK (mcs) : Currently there are 4 jobs exists to line 3 stacking July 5, 2025 at 6:42 PM, Selem /Ivancsa FA : Hi @mcs, please cancel the job assigned to AGV#7. GF.VD CA chamber is not working. July 5, 2025 at 6:44 PM, VK (mcs) : Jobs cancelled July 5, 2025 at 6:56 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 25 ,CA: 00 Pre-Stk ➤ Notching AN:18 , CA: 00 Pre-Stk ➤ VD AN: 00 ,CA: 14 Post-Stock ➤ Stacking AN: 65 , CA: 44 VD CA (Process Breakdown) UR: 00 ,Drying: 136 ,LR: 06, Wait:00, OOS: 12 VD AN (Process Breakdown) UR: 00 ,Drying: 108 , LR: 12 , Wait:76, OOS: 12 July 5, 2025 at 7:43 PM, Spilka Sofia : Hello,line 1 st 11 AGV 10 stopped,pls check,thanks July 5, 2025 at 7:43 PM, 원재 : @FA NC Ca #1 Agv checking please July 5, 2025 at 7:55 PM, Chinges Fa : MCS please check VD Cathode AGV#07 idle July 5, 2025 at 8:13 PM, VK (mcs) : @FA Please check Cathode reel STK C51-P03 Crane is not take a tray July 5, 2025 at 8:20 PM, Novák Károly F. A. : Checking July 5, 2025 at 8:29 PM, P.Bence A SSL : Check again please thank you . July 5, 2025 at 8:31 PM, Novák Károly F. A. : Solved July 5, 2025 at 8:33 PM, Victory : NC CA GF Reel shipment delayed (we have not received the reel for around 20 minutes) Kindly check Tks July 5, 2025 at 8:37 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 14 ,CA: 00 Pre-Stk ➤ Notching AN:20 , CA: 14 Pre-Stk ➤ VD AN: 03, CA: 04 Post-Stock ➤ Stacking AN: 65 , CA: 27 VD CA (Process Breakdown) UR: 16 ,Drying: 104 ,LR: 50, Wait:04, OOS: 12 VD AN (Process Breakdown) UR: 08 ,Drying: 120 , LR: 14 ,Wait:60 , OOS: 12 July 5, 2025 at 8:37 PM, VK (mcs) : There is no available material. July 5, 2025 at 8:44 PM, N.Zoli F.A. : @VK (mcs) Hi. There is an empty carrier (LTA0695) on port E0STJA51_M03_OP01 and it has no task. Please give the crane an order to take it away. July 5, 2025 at 8:49 PM, VK (mcs) : Creating job without rack-in valid request will make a problem in MES and MCS. Please rack-in it, and it will get a job automatically. Thx July 5, 2025 at 8:56 PM, N.Zoli F.A. : Thank You, solved July 5, 2025 at 8:56 PM, VK (mcs) : Anytime July 5, 2025 at 9:05 PM, Nadiia Arkhipova : Hello, Agv Station Anode on line 5, machine 6 is not working July 5, 2025 at 9:09 PM, Nadiia Arkhipova : Stacking July 5, 2025 at 9:30 PM, Nguyên : sorry. please prioritize picking up at machine 5/2. 2/1. NC AN GF. help me. thanks July 5, 2025 at 10:23 PM, 이민재 : NC shift leader, please come to VD AN. July 5, 2025 at 10:26 PM, Usukhuu /ivancsa FA : This message was deleted. July 5, 2025 at 10:29 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN:19 , CA: 09 Pre-Stk ➤ VD AN: 02, CA: 06 Post-Stock ➤ Stacking AN: 68 , CA: 30 VD CA (Process Breakdown) UR: 10 ,Drying: 124 ,LR: 40, Wait:00, OOS: 12 VD AN (Process Breakdown) UR: 12 ,Drying: 120 , LR: 20 ,Wait:56 , OOS: 08 July 5, 2025 at 10:57 PM, Victory : Hello, VD CA GF #48(6-3) Pls assign the AGV come to unload full MGZ Tks July 5, 2025 at 11:03 PM, VK (mcs) : Machine is out of service, mCS cannot create transfer command. @FA Please check it. Thx July 5, 2025 at 11:08 PM, Nguyên : sorry. please prioritize picking up at machine 1/2 NC AN GF. help me. thanks July 5, 2025 at 11:10 PM, Amiridaa left this chatroom. July 5, 2025 at 11:43 PM, 김지수PM(Gyuri)_FA : @VK (mcs) Could you please increase the priority of 12001 12003 track(c1stka71) > so many carriers are waiting to be stored at A71 from A72 (c1cnv071) July 5, 2025 at 11:45 PM, VK (mcs) : Priority increased to 60 temporary. July 5, 2025 at 11:45 PM, 김지수PM(Gyuri)_FA : Thanks! July 6, 2025 at 12:26 AM July 6, 2025 at 12:26 AM, Nguyên : CA NC GF 4/3 AGV#9 error Come for me Thank you July 6, 2025 at 12:28 AM, Nguyên : CA NC GF ROBOT #3 ERROR Come for me Thank you July 6, 2025 at 12:31 AM, Selem /Ivancsa FA : Solved July 6, 2025 at 12:42 AM, Nguyên : Pls fix plate position on chamber 41(5/5) VD AN GF July 6, 2025 at 12:47 AM, Kaniz / Ivancsa FA : There are 4 full magazine in notching 'AN' STK July 6, 2025 at 12:50 AM, Kaniz / Ivancsa FA : Now 5 full magazine in notching AN STK July 6, 2025 at 12:51 AM, Nguyên : sorry. please prioritize picking up at machine 3/2 5/3 NC AN GF. help me. thanks July 6, 2025 at 12:53 AM, VK (mcs) : Sorry, what is the problem? Can you explain more? July 6, 2025 at 1:07 AM, P.Bence A SSL : Check please thank you July 6, 2025 at 1:15 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN:27, CA: 15 Pre-Stk ➤ VD AN: 02, CA: 01 Post-Stock ➤ Stacking AN: 55 , CA: 40 VD CA (Process Breakdown) UR: 12 ,Drying: 144 ,LR: 40, Wait:12, OOS: 12 VD AN (Process Breakdown) UR: 13 ,Drying: 132 , LR: 08 ,Wait:52 , OOS: 08 July 6, 2025 at 2:17 AM, Nguyên : Pls fix plate position on chamber 41(5/5) VD AN GF July 6, 2025 at 2:19 AM, Selem /Ivancsa FA : @MCS please check NC anode AGV#02 idle July 6, 2025 at 2:19 AM, 원재 : Please checking NC An #8 Agv July 6, 2025 at 2:22 AM, Nguyên : sorry. please prioritize picking up at machine 1/2 NC AN GF. help me. thanks July 6, 2025 at 2:22 AM, Selem /Ivancsa FA : Solved July 6, 2025 at 3:10 AM, 이민재 : @MCS Please share the returnable materials. July 6, 2025 at 3:15 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN:28, CA: 06 Pre-Stk ➤ VD AN: 00, CA: 08 Post-Stock ➤ Stacking AN: 54 , CA: 35 VD CA (Process Breakdown) UR: 00 ,Drying: 164 ,LR: 08, Wait:00, OOS: 12 VD AN (Process Breakdown) UR: 16 ,Drying: 132 , LR: 08 ,Wait:60 , OOS: 08 July 6, 2025 at 3:15 AM, Nguyên : sorry. please prioritize picking up at machine 1/2 NC AN GF. help me. thanks. July 6, 2025 at 3:15 AM, Nguyên : AGV has not picked up goods for a long time. July 6, 2025 at 3:18 AM, VK (mcs) : Over all there are 10 AGVs and all of them are busy, jobs already assigned and increasing priority via MCS is not work. July 6, 2025 at 3:29 AM, VK (mcs) : @FA Please check Cathode reel STK C52 There is no error but cranes are stopped. July 6, 2025 at 3:32 AM, 이한웅(삼구) : @지석범PM (이반차FA) 안녕하세요. Ca 후창고 C1STKC72_M02 매뉴얼 포트 후창고 투입 중 멈춰 있습니다. 확인 부탁드립니다. July 6, 2025 at 3:32 AM, Victory : VD CA GF #51(6-6) Pls assign the AGV in order to remove the remaining full MGZ. Tks July 6, 2025 at 3:32 AM, 지석범PM (이반차FA) : 네 확인해보겠습니다~ July 6, 2025 at 3:33 AM, 이한웅(삼구) : 감사합니다. July 6, 2025 at 3:42 AM, Kaniz / Ivancsa FA : There is 11 full magazine in AN STK July 6, 2025 at 3:49 AM, VK (mcs) : @FA Please check it, problem still not solved. Cranes are inactive stop July 6, 2025 at 4:18 AM, VK (mcs) : @FA Please check Circular conveyor C1CNV072 (16050) Carrier is not moving.destination port 32 July 6, 2025 at 5:19 AM, 이한웅(삼구) : 음극 풀매거진 창고 투입 부탁드립니다. July 6, 2025 at 5:20 AM, 이한웅(삼구) : Anode July 6, 2025 at 5:51 AM, 지석범PM (이반차FA) : Please check again July 6, 2025 at 5:56 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN:08, CA: 03 Pre-Stk ➤ VD AN: 03, CA: 00 Post-Stock ➤ Stacking AN: 63 , CA: 63 VD CA (Process Breakdown) UR: 00 ,Drying: 140 ,LR: 24, Wait:08, OOS: 08 VD AN (Process Breakdown) UR: 00 ,Drying: 144 , LR: 08 ,Wait:28 , OOS: 08 July 6, 2025 at 6:32 AM, Szücs Géza FT-B : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.06. 9+1/12+1 Tech, 1Sl, 1Sup. Overtime(0): Holiday(2): Böröcz Tamás, Denkó János Sick(1): Gerbovits Kevin Shift Change(0): --------------- Electrode(3): Rácz Dániel, Csanálosi Gábor, Czeilinger Krisztián, --------------- Assy GF (3): Kovács Ágnes, Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(1): Boromisza Zoltán ------------ July 6, 2025 at 7:41 AM, Natsag/ Ivansca FA : VD AN chamber 1-4 LD/UD alarm pls check Thank you ! July 6, 2025 at 7:43 AM, MCS/RTD System : There's active job. VC 09 is on the way July 6, 2025 at 7:48 AM, Diana : Hello. Problem with AGV 2 on the line 3/9. Thank you July 6, 2025 at 7:56 AM, Lan Nhi : @FA Hello. Please check agv#1 VD/An is broken. Thanks July 6, 2025 at 7:58 AM, 방혁 PM(Bang.Hyuk) FA : Hello what is broken now? Omw July 6, 2025 at 7:59 AM, Lan Nhi : agv number 1 is erroring at line 1 VD/AN July 6, 2025 at 8:47 AM, Debreczeni Ármin : @MCS/RTD System Please send lot quantity thank you July 6, 2025 at 8:49 AM, Ngoc zia : Vd Ca 4-8 #agv5 error July 6, 2025 at 8:52 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN:06, CA: 04 Pre-Stk ➤ VD AN: 03, CA: 12 Post-Stock ➤ Stacking AN: 75 , CA: 40 VD CA (Process Breakdown) UR: 44 ,Drying: 112 ,LR: 16, Wait:00, OOS: 08 VD AN (Process Breakdown) UR: 32 ,Drying: 100 , LR: 36 ,Wait:36 , OOS: 08 July 6, 2025 at 8:56 AM, Debreczeni Ármin : Agv's dont move on line 1 2 3 is there any problem? As I see a big group of AgV just standby position. July 6, 2025 at 9:08 AM, MCS/RTD System : They are moving and most of them has jobs. July 6, 2025 at 9:11 AM, Natsag/ Ivansca FA : @MCS VD CA AGV#3 idle. Please check Thank you! July 6, 2025 at 9:18 AM, MCS/RTD System : Sent back to stk. Thank you July 6, 2025 at 9:32 AM, 은향(OH EUN HYANG) : Robot #3Err Please come to Hungary Technician Plase GFC NC July 6, 2025 at 9:32 AM, 은향(OH EUN HYANG) : The robot stopped without a word. July 6, 2025 at 9:39 AM, Kovács Ágnes : Solved July 6, 2025 at 9:41 AM, Ngoc zia : @fa vd ca #agv 7,5,4 error July 6, 2025 at 10:22 AM, Ngoc zia : @fa VD Ca 2-2 Drying failure due to alarm occurrence during drying. The door is open. Please return it manually to the Magazine STK-72 warehousing by agv. Thank you July 6, 2025 at 10:28 AM, Ngoc zia : @rtd id “TEMP” when we log in have issue is “session expired” . What should we can do ? July 6, 2025 at 10:29 AM, MCS/RTD System : Make sure, the connection is good. I'm resetting the password. Re-log in again and see if it helps July 6, 2025 at 10:32 AM, Ngoc zia : Thank you. It is working now July 6, 2025 at 10:40 AM, Diana : One side on Line 3 of the stack is almost without material, what is the problem and why are AGVs standing?😢 Thank you July 6, 2025 at 10:41 AM, MCS/RTD System : @Fa Please check safety door error at c1cnv072_p01 Thank you July 6, 2025 at 10:42 AM, Debreczeni Ármin : Agv #7 stopped front of line 2 st July 6, 2025 at 10:47 AM, MCS/RTD System : All good from MCS. Increased priorities. CNV is OOS. @ACS @Fa Please check. Thank you July 6, 2025 at 10:52 AM, Debreczeni Ármin : @MCS/RTD System Please send lot quantity thank you July 6, 2025 at 10:54 AM, 은향(OH EUN HYANG) : GFA NC AGV @ 3 Fork Impossible to Originate Hungarian Technician July 6, 2025 at 10:55 AM, Böröczki Balázs : Coming. July 6, 2025 at 10:56 AM, 은향(OH EUN HYANG) : Please check! July 6, 2025 at 10:57 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 11, CA: 01 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 133, CA: 54 VD CA (Process Breakdown) UR: 08 ,Drying: 104 ,LR: 32, Wait:12, OOS: 08 VD AN (Process Breakdown) UR: 12 ,Drying: 64 , LR: 20 ,Wait:72 , OOS: 08 July 6, 2025 at 11:06 AM, 정은탁 (Jung EunTak) : @FA NC Ca C0NGVC01-P03-MCP#3 Error. Please Check July 6, 2025 at 11:07 AM, Lan Nhi : @FA please add 2 more pallets to machine 1-3 VD/AN. thank you July 6, 2025 at 11:15 AM, Natsag/ Ivansca FA : @MCS NC AN AGV#05 idle. Please check Thank you! July 6, 2025 at 11:22 AM, MCS/RTD System : It will move now. Thank you July 6, 2025 at 11:28 AM, Diana : Problem with AGV 2 on the line 3/9. Thank you July 6, 2025 at 11:39 AM, Debreczeni Ármin : Line 4 5 6 Agv arent bring AN material is there any problem? Stacking July 6, 2025 at 11:41 AM, Natsag/ Ivansca FA : @MCS NC AN AGV#03 idle. Please check Thank you! July 6, 2025 at 11:44 AM, MCS/RTD System : No issues from MCS side. July 6, 2025 at 11:45 AM, Debreczeni Ármin : Lines almost empty July 6, 2025 at 11:46 AM, MCS/RTD System : @FA PLEASE CHEXK C1STKC_P02, PIO TR OFF TIMER OVER ERROR C02, LOAD OVERSIZE ERROR THANKS July 6, 2025 at 11:47 AM, MCS/RTD System : Will move now. Thank you July 6, 2025 at 11:50 AM, Debreczeni Ármin : All AGV skip AN out porta July 6, 2025 at 11:50 AM, Debreczeni Ármin : Ports July 6, 2025 at 11:52 AM, Debreczeni Ármin : All line got this problem now July 6, 2025 at 11:54 AM, Sazzad Bhai SKon : Did you press LR? July 6, 2025 at 11:55 AM, Debreczeni Ármin : Yes July 6, 2025 at 11:56 AM, Debreczeni Ármin : Could you add prio AN material in the next one hour? July 6, 2025 at 11:56 AM, MCS/RTD System : No search lot July 6, 2025 at 11:57 AM, Kovács Ágnes : Solved July 6, 2025 at 12:07 PM, Debreczeni Ármin : @MCS/RTD System If we take out mgz manually is decrease radically of the automatic magazines supply? July 6, 2025 at 12:09 PM, Sazzad Bhai SKon : Not understand, what? July 6, 2025 at 12:13 PM, MCS/RTD System : @FA @CCS COULD YOH CHECK C1CNV072_P04 AND P08 PHYSICALLY ? July 6, 2025 at 12:14 PM, Debreczeni Ármin : If we take out plates manual. The crane will be busy and give plates slower to automatic ports? July 6, 2025 at 12:14 PM, MCS/RTD System : Also this conveyor is going OOS very frequently... According to MCS, P04 & P08 IS EMPTY July 6, 2025 at 12:15 PM, Sazzad Bhai SKon : You can ask for manual, July 6, 2025 at 12:15 PM, Debreczeni Ármin : Ok July 6, 2025 at 12:16 PM, Debreczeni Ármin : @Sazzad Bhai SKon please send AN stack materials to c1stka72 m01 port Need amount : 25 plate July 6, 2025 at 12:17 PM, Debreczeni Ármin : @Kristina @Mezhenskiy Please share that amount between the lines July 6, 2025 at 12:25 PM, Debreczeni Ármin : @Szücs Géza FT-B A GFen az AGVk nem viszik az anode anyagot tudsz valami háttér infot? Nekem azt mondták minden fasza de nem amúgy July 6, 2025 at 12:31 PM, 은향(OH EUN HYANG) : GFA NC AGV @ 3 Fork Impossible to Originate Hungarian Technician Please July 6, 2025 at 12:33 PM, MCS/RTD System : @FA PLEASE CHECK C1STKC72_P02 PIO TR OFF TIMER OVER ERROR P10, LIGHT CURTAIN ERROR Thank you July 6, 2025 at 12:35 PM, Debreczeni Ármin : Is it send? July 6, 2025 at 12:36 PM, Ngoc zia : Nc ca 4.2 #agv 10 error July 6, 2025 at 12:37 PM, MCS/RTD System : Processing July 6, 2025 at 12:42 PM, Ngoc zia : @fa July 6, 2025 at 12:54 PM, MCS/RTD System : Sent already. July 6, 2025 at 12:55 PM, Debreczeni Ármin : Thank you July 6, 2025 at 12:55 PM, Debreczeni Ármin : Agv #8 stoped at p06 July 6, 2025 at 12:57 PM, MCS/RTD System : @CCS Please check. Thank you! July 6, 2025 at 1:00 PM, Debreczeni Ármin : @MCS/RTD System Please share lot quantity July 6, 2025 at 1:10 PM, 심재훈 : 지금 자동화 물류 정상적으로 잘 돌고 있나요? July 6, 2025 at 1:13 PM, Natsag/ Ivansca FA : @MCS ST AN AGV#08 idle. Please check Thank you! July 6, 2025 at 1:13 PM, 심재훈 : 후창고에 자재는 많은데 현장 공급이 안되고 있는 것 같은데 현재 관리자가 누구신가요? July 6, 2025 at 1:13 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 02 ,CA: 00 Pre-Stk ➤ Notching AN: 18, CA: 08 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 89, CA: 54 VD CA (Process Breakdown) UR: 12 ,Drying: 140 ,LR: 04, Wait:12, OOS: 08 VD AN (Process Breakdown) UR: 00 ,Drying: 96, LR: 40 ,Wait:68, OOS: 08 July 6, 2025 at 1:14 PM, 연해리 : 네 PM님 현재 확인중입니다 July 6, 2025 at 1:15 PM, 심재훈 : 크래인이 느린건지, 컨베이어 물류가 느린건지 아직 상황파악이 안된거라고 이해하면 될까요? July 6, 2025 at 1:15 PM, 은향(OH EUN HYANG) : 음극 전창고 크레인지속적 Err로 회수물류가 많이 밀려있긴합니다 July 6, 2025 at 1:16 PM, Natsag/ Ivansca FA : @MCS NC CA AGV#03 idle. Please check Thank you! July 6, 2025 at 1:16 PM, 심재훈 : 감사합니다 July 6, 2025 at 1:16 PM, Debreczeni Ármin : @Kristina @Mezhenskiy @Vladyslav Kucher @Valentyn @Diana @Yosyp Tovt @Dmytro Poluekto @Mykhailo If need more an material support let me know and make more manual order. July 6, 2025 at 1:17 PM, 은향(OH EUN HYANG) : 크레인 조치는 되어서 가동되고 있읍니다 July 6, 2025 at 1:21 PM, MCS/RTD System : It's moving now July 6, 2025 at 1:23 PM, Natsag/ Ivansca FA : ?? July 6, 2025 at 1:24 PM, Sazzad Bhai SKon : @Debreczeni Ármin Please check out bout conveyor port P08 Stacking line. July 6, 2025 at 1:25 PM, MCS/RTD System : Moving now July 6, 2025 at 1:33 PM, Debreczeni Ármin : Cv10 error post sk ca warehouse July 6, 2025 at 1:53 PM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv072 > carriers are not moving July 6, 2025 at 2:12 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 6plates out from the c1cnv072_m04 July 6, 2025 at 2:17 PM, 연해리 : PM님 저희 신규 투입된 작업자 교육 부족으로 4-6L쪽 순환물류 알람 조치 시간이 오래걸려 12:10-12:50 동안 약 40분 가량 컨베이어가 비가동 잡혔었습니다. 지금은 정상화 됐고 3시까지 스태킹쪽에 자재 다 채워두겠습니다. July 6, 2025 at 2:18 PM, 연해리 : 이번 건은 컨베이어 속도나 전창고 크레인 에러랑은 무관한 걸로 봐주시면 좋을 것 같습니다 July 6, 2025 at 2:19 PM, 이도형 (Lee) : @FA Frequent stops are occurring at Node 91 during NC Ca AGV movement. Please check and inspect the issue. July 6, 2025 at 2:30 PM, Ngoc zia : Nc Ca 4.3 #agv9 error 2 other behind pause July 6, 2025 at 2:41 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please increase the priority of 12003 track(c1stka71 p21) for a while July 6, 2025 at 2:42 PM, MCS/RTD System : On it July 6, 2025 at 2:45 PM, MCS/RTD System : Did it. Keeping eye on it. July 6, 2025 at 2:59 PM, Natsag/ Ivansca FA : @MCS NC AN AGV#04 idle stopped Please check Thank you! July 6, 2025 at 3:02 PM, MCS/RTD System : Thank you! It's sorted. Moving now July 6, 2025 at 3:12 PM, Ngoc zia : @fa vd Ca #42 right / upper not seated wrong position of plate. Can u restock agv manually pls July 6, 2025 at 3:13 PM, Ngoc zia : @fa vd Ca #35 left/upper & bottom not seated wrong position of plate. Can u restock agv manually pls July 6, 2025 at 3:18 PM, Debreczeni Ármin : @MCS/RTD System i send you an another manual request July 6, 2025 at 3:18 PM, Debreczeni Ármin : @MCS/RTD System please send AN stack materials to c1stka72 m01 port Need amount : 20 plate July 6, 2025 at 3:19 PM, MCS/RTD System : On it July 6, 2025 at 3:32 PM, MCS/RTD System : Sent. Sharing the lot soon July 6, 2025 at 3:33 PM, Debreczeni Ármin : Thank you July 6, 2025 at 3:33 PM, Debreczeni Ármin : @Kristina @Mezhenskiy please July 6, 2025 at 3:39 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 30, CA: 21 Pre-Stk ➤ VD AN: 00 CA: 08 Post-Stock ➤ Stacking AN: 22, CA: 24 VD CA (Process Breakdown) UR: 09,Drying: 132,LR: 04, Wait:00, OOS: 08 VD AN (Process Breakdown) UR: 00 ,Drying: 116, LR: 16 ,Wait:44, OOS: 08 July 6, 2025 at 4:48 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 01 ,CA: 01 Pre-Stk ➤ Notching AN: 13, CA: 15 Pre-Stk ➤ VD AN: 01 CA: 20 Post-Stock ➤ Stacking AN: 17, CA: 12 VD CA (Process Breakdown) UR: 24,Drying: 116,LR: 12, Wait:00, OOS: 08 VD AN (Process Breakdown) UR: 08 ,Drying: 112, LR: 56 ,Wait:24, OOS: 08 July 6, 2025 at 4:58 PM, 은향(OH EUN HYANG) : This message was deleted. July 6, 2025 at 4:59 PM, Ngoc zia : @fa can u check this pls vd ca #42, 35 July 6, 2025 at 5:41 PM, 이한웅(삼구) : please check NC An #8 AGV July 6, 2025 at 5:56 PM, Ngoc zia : Nc ca robot 3#agv5 error July 6, 2025 at 6:00 PM, Dariimaa/다리마/Ivancsa : @MCS good evening C1CNV072_P34 MLA6043 destination not available. Please check. Thank you! July 6, 2025 at 6:00 PM, Mohammad Amir : Checking! July 6, 2025 at 6:02 PM, Mohammad Amir : This message was deleted. July 6, 2025 at 6:02 PM, Mohammad Amir : This message was deleted. July 6, 2025 at 6:05 PM, Yulya Kirsanova : Hello. Agv#3 stopped with error near Staсking Line 6/20 Please check @fa Thank you so much. July 6, 2025 at 6:07 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Please check the c1cnv071 > the carrier on the 12006 track, if this one is trash data, please remove it thanks July 6, 2025 at 6:07 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 12 Technician, 1 Sl, 2 Overtime ———————————— Electrode (3): Gutenkunst Ábel Zoltán Benczik Ádám Bonnyai Ákos ———————————— Assembly(4+1): Magyar Imre Nagy Tibor Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 6, 2025 at 6:08 PM, Mohammad Amir : Good evening, Sure, Checking! July 6, 2025 at 6:08 PM, 김지수PM(Gyuri)_FA : But also 13007 too. Thanks amir July 6, 2025 at 6:09 PM, 김지수PM(Gyuri)_FA : @fa please check c1cnv072 > carriers are not moving. Thanks July 6, 2025 at 6:11 PM, Mohammad Amir : @FA Could you please check MLA6043 located at C1CNV072_P34 it is not moving and job creation from MCS is not successful. So please move this pallet from CCS side cause it is blocking stacking materials delivery. Thank you very much! July 6, 2025 at 6:13 PM, Mohammad Amir : From MCS side both ports are clear and doesn't contain any data. However from CCS side I see that there is still data exists at 12006 and 13007 , please check it. Thank you very much! July 6, 2025 at 6:14 PM, Mohammad Amir : @Vékony Ferenc Please check this issue it is blocking stacking materials delivery. There is Data Loss error at P34. Thank you very much! July 6, 2025 at 6:15 PM, Dariimaa/다리마/Ivancsa : Solved July 6, 2025 at 6:15 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 6:16 PM, Mohammad Amir : Update:- Issue has been resolved ✅ Now stacking materials delivery has been normalized. Thank you very much! July 6, 2025 at 6:16 PM, 김지수PM(Gyuri)_FA : I checked, both of carriers are duplicated carriers. I will delete these datas on c1cnv071. Thanks July 6, 2025 at 6:16 PM, Mohammad Amir : Thank you very much! July 6, 2025 at 6:46 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 01,CA:19 Pre-Stk ➤ VD AN: 03 CA: 02 Post-Stock ➤ Stacking AN: 26, CA: 31 VD AN (Process Breakdown) UR: 08,Drying: 132,LR: 32, Wait:32, OOS: 08 VD CA (Process Breakdown) UR: 00 ,Drying: 108,LR: 12,Wait:12, OOS: 04 Thank you very much! July 6, 2025 at 7:02 PM, Mohammad Amir : @FA Please check E0CNVC52 09-052 there is Data Mismatch error and it is blocking reels delivery. Please check the issue on priority. Thank you very much! July 6, 2025 at 7:02 PM, 원재 : @FA 양극 VD 챔버 4-8 좌측상단(Upper-Left) 안착불량입니다. 후창고 반송 부탁드립니다. July 6, 2025 at 7:03 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check. July 6, 2025 at 7:04 PM, 이한웅(삼구) : @이민재 안착 불량은 해결 된 상태인데 플레이트 정보가 안넘어 왔습니다. 좌측 상/하단 후창고 반송해주면 LR 다시 요청하겠습니다. July 6, 2025 at 7:05 PM, 김지수PM(Gyuri)_FA : 2호기 할당받아서 가고있습니다. July 6, 2025 at 7:09 PM, 이한웅(삼구) : 감사합니다 July 6, 2025 at 7:30 PM, Kaniz / Ivancsa FA : There is some issue with robot in notching cathode.. July 6, 2025 at 7:31 PM, Mohammad Amir : @FA Please check NC CA Robot #1(8095) there is Robot error. Thank you very much! July 6, 2025 at 7:37 PM, Mohammad Amir : @FA Please check E0STKC52_C01 there is Load Oversize error. Thank you very much! July 6, 2025 at 7:37 PM, Oleh Kaplinskyi : This message was deleted. July 6, 2025 at 7:40 PM, 원재 : @FA 양극 VD 5-6 좌측 상/하단 플레이트정보가 안넘어 왔습니다. 후창고 반송 해주시면 다시 LR요청 하겠습니다. July 6, 2025 at 7:42 PM, Mohammad Amir : Good evening, For your information, AGV#5 has just deposited the materials and now Anode VD 5-6 is full chamber. Thank you very much! July 6, 2025 at 8:07 PM, Mohammad Amir : @FA @Vékony Ferenc Please check STKC52_C01/C02 ,these cranes are inactive without error and because of this several jobs are pending. Please make it active. Thank you very much! July 6, 2025 at 8:10 PM, Mohammad Amir : @FA Please check this issue on Priority. Thank you! July 6, 2025 at 8:19 PM, Usukhuu /ivancsa FA : @mcs please check AGV#6 and AGV#7 GF VD AN July 6, 2025 at 8:20 PM, Mohammad Amir : Sure, Checking! July 6, 2025 at 8:20 PM, Usukhuu /ivancsa FA : AGV#6 is going with one plate and no job July 6, 2025 at 8:20 PM, Mohammad Amir : I am checking! July 6, 2025 at 8:21 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please increase the priority of 8065(e0stkc51_p04) track for a while July 6, 2025 at 8:21 PM, Mohammad Amir : Issue has been resolved ✅ AGV#6 has started to move. Thank you very much! July 6, 2025 at 8:22 PM, Mohammad Amir : Sure, Checking! July 6, 2025 at 8:24 PM, Mohammad Amir : I am increasing. Thank you very much! July 6, 2025 at 8:24 PM, Usukhuu /ivancsa FA : @mcs please check GF VA AN port #1-5 July 6, 2025 at 8:24 PM, Usukhuu /ivancsa FA : AGV are trying to pick up 1 material there is none July 6, 2025 at 8:25 PM, Mohammad Amir : Checking July 6, 2025 at 8:25 PM, P.Bence A SSL : Check again please July 6, 2025 at 8:26 PM, Mohammad Amir : Job has been cancelled successfully ✅ Please check and confirm,is VD AN 1-5 P02,is it Empty? Thank you very much! July 6, 2025 at 8:26 PM, Mohammad Amir : Sure, Checking July 6, 2025 at 8:28 PM, Usukhuu /ivancsa FA : it is empty July 6, 2025 at 8:28 PM, Mohammad Amir : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 00,CA:16 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 42, CA: 32 VD AN (Process Breakdown) UR: 04,Drying: 148,LR: 24, Wait:28,OOS: 08 VD CA (Process Breakdown) UR: 20,Drying: 140,LR: 08,Wait:20, OOS: 12 Thank you very much! July 6, 2025 at 8:29 PM, Mohammad Amir : Thank you very much for the confirmation. I am working on this issue. July 6, 2025 at 8:30 PM, Mohammad Amir : Issue has been resolved successfully ✅. Now this phenomenon will not occur again. I am monitoring. Thank you very much! July 6, 2025 at 8:30 PM, Mohammad Amir : @FA Please check NC CA RTV01 ,it is OOs and reels delivery has stopped. Thank you very much! July 6, 2025 at 8:32 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please increase priority of 12003(c1stka71_p21)? July 6, 2025 at 8:32 PM, Mohammad Amir : Checking! July 6, 2025 at 8:33 PM, Mohammad Amir : I have increased the priority. Thank you! July 6, 2025 at 8:33 PM, Mohammad Amir : Carrier has started to move. Now traffic will be clear from Recovery CNV. I am monitoring. Thank you very much! July 6, 2025 at 8:34 PM, 김지수PM(Gyuri)_FA : Thanks! July 6, 2025 at 8:35 PM, Mohammad Amir : You are welcome! I am keep increasing the priority so that traffic can be normalised ✅. July 6, 2025 at 8:40 PM, 김지수PM(Gyuri)_FA : @fa Please check vc01 > ca vd July 6, 2025 at 8:40 PM, Mohammad Amir : Update :- Now CNVC51 has filled with empty trays so now there is no need to increase priority ✅. I am monitoring. Thank you very much! July 6, 2025 at 8:55 PM, Mohammad Amir : @Manufacturing Please check MLC4137 located at C1CNV072_M04 for this carrier Magazine MC3484 is not closed. Thank you very much! July 6, 2025 at 9:10 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir NC CA AGV#01 idle with empty magazine. Please check Thank you! July 6, 2025 at 9:10 PM, Mohammad Amir : Sure, Checking! July 6, 2025 at 9:13 PM, Mohammad Amir : Issue has been resolved ✅ AGV#1 has started to move. Thank you very much! July 6, 2025 at 9:45 PM, Mohammad Amir : Update :- Now traffic on the recovery CNV has been normalized ✅. So I am making the priority to back to normal. Thank you very much! July 6, 2025 at 9:53 PM, Dariimaa/다리마/Ivancsa : @Mohammad Amir ST AN C1CNV072_P28 MLC1051 has not moved for a long time. Please check Thank you! July 6, 2025 at 9:53 PM, Mohammad Amir : Sure, Checking July 6, 2025 at 9:59 PM, Mohammad Amir : Issue has been resolved ✅ MLC1051 has started to move with AGV#5. Thank you very much! July 6, 2025 at 9:59 PM, Mohammad Amir : @Dariimaa/다리마/Ivancsa July 6, 2025 at 10:00 PM, Dariimaa/다리마/Ivancsa : Thank you very much! July 6, 2025 at 10:01 PM, Mohammad Amir : You are most welcome! Feel free to contact me again if you need any further assistance. July 6, 2025 at 10:12 PM, Kaniz / Ivancsa FA : This message was deleted. July 6, 2025 at 10:12 PM, Kaniz / Ivancsa FA : This message was deleted. July 6, 2025 at 10:18 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 11,CA:23 Pre-Stk ➤ VD AN: 03,CA: 04 Post-Stock ➤ Stacking AN: 42, CA: 15 VD AN (Process Breakdown) UR: 12,Drying: 152,LR: 12, Wait:28,OOS: 08 VD CA (Process Breakdown) UR: 28,Drying: 164,LR: 00,Wait:00, OOS:08 Thank you very much! July 6, 2025 at 11:12 PM, Mohammad Amir : @FA Please check NC CA RTV01 ,it is OOs and reels delivery has stopped. Thank you very much! July 6, 2025 at 11:43 PM, Mohammad Amir : @Manufacturing, Please press LR for VD CA 4-8-P01/02 ,there is a half chamber situation exists. Thank you very much! July 6, 2025 at 11:59 PM, Mohammad Amir : @FA Please check NC CA RTV01 ,it has Run Time over error and reels delivery has stopped. Thank you very much! July 7, 2025 at 12:00 AM July 7, 2025 at 12:00 AM, P.Bence A SSL : Check again please thank you July 7, 2025 at 12:00 AM, Mohammad Amir : Sure, Checking! July 7, 2025 at 12:02 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 10,CA:08 Pre-Stk ➤ VD AN: 00,CA: 11 Post-Stock ➤ Stacking AN: 80, CA: 13 VD AN (Process Breakdown) UR: 04,Drying: 128,LR: 16, Wait:52,OOS: 08 VD CA (Process Breakdown) UR: 24,Drying: 132,LR: 12,Wait:00, OOS:08 Thank you very much! July 7, 2025 at 12:02 AM, Victory : VD CA GF Plate number: MLC3004 I can not manual it to the warehouse cs1stkc71 Pls come to check Tks July 7, 2025 at 12:05 AM, Mohammad Amir : @MES Please check MLC3004 can not be Rackin because we are receiving Error from MES that there are magazines with different product information. Thank you very much! @Victory Due to MES issue you couldn't warehouse this carrier,i informed tej MES regarding teb issue. Thank you very much! July 7, 2025 at 12:14 AM, 이한웅(삼구) : MLC3110(확인 필요) 2022, 6580, 4481, 1237, 4113, 5156 MLC3150(확인 필요) 3147, 4125, 1420, 1313, 1226, 6193 MLC2247(확인 필요) 6261, 5288, 6566, 2098, 6113, 1201 MLC4110(확인 필요) 2222, 5475, 4155, 4487, 1139, 6423 MLC4193(확인 필요) 2549, 3423, 4569, 2417, 1573, 3243 MLC4080(확인 필요) 2128, 4480, 1365, 3338, 2409, 6203 MLC6034(확인 필요) 1149, 4474, 5073, 2319, 2286, 1466 MLC3098(확인 후 리워크) 2181, 2501, 4192, 5391, 6430, 6141 MLC3063(확인 필요) 4298, 5102, 6051, 4332, 4153, 2224 MLC3005(확인 필요) 1514, 2237, 3434, 4228, 1456, 51 July 7, 2025 at 12:14 AM, 이한웅(삼구) : @지석범PM (이반차FA) 안녕하세요. 해당 플레이트 전부 홀드 인가요? July 7, 2025 at 12:15 AM, 이한웅(삼구) : MES 확인 시 맵핑 상태, 매거진 상태 정상입니다. July 7, 2025 at 12:19 AM, 지석범PM (이반차FA) : 확인 후에 연락드리도록 하겠습니다. July 7, 2025 at 12:47 AM, Mohammad Amir : @FA Please check NC CA Robot #1. Thank you very much! July 7, 2025 at 12:48 AM, Mohammad Amir : @FA Please check C1STKC71_P21 there is Run Time over error and it has blocked the materials recovery. Thank you very much! July 7, 2025 at 12:53 AM, Mohammad Amir : This message was deleted. July 7, 2025 at 12:58 AM, Mohammad Amir : @Manufacturing, Please press LR for VD CA 4-8-P01/02 ,there is a half chamber situation exists. Thank you very much! July 7, 2025 at 1:10 AM, 이한웅(삼구) : Please check LR July 7, 2025 at 1:12 AM, Mohammad Amir : LR received successfully at 1:10. ✅ However currently there is not enough material as soon as material will be available jobs will be created for remaining half chamber. Thank you very much! July 7, 2025 at 1:45 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 13 ,CA:01 Pre-Stk ➤ VD AN: 00,CA: 02 Post-Stock ➤ Stacking AN: 80, CA: 43 VD AN (Process Breakdown) UR: 04,Drying: 120,LR: 12, Wait:60,OOS: 08 VD CA (Process Breakdown) UR: 28,Drying: 124,LR: 36,Wait:20, OOS:04 Thank you very much! July 7, 2025 at 1:47 AM, 지석범PM (이반차FA) : 4110,4193,4028은 한번 더 확인해보겠습니다. 나머지는 전부 hold 상태입니다. July 7, 2025 at 1:48 AM, 이한웅(삼구) : 홀드 사유가 뭔가요??? July 7, 2025 at 1:53 AM, 지석범PM (이반차FA) : 대다수의 경우에 매거진 중복입니다. 모든 플레이트의 경우에서는 잠시만 기다려주세요 July 7, 2025 at 1:55 AM, Nguyên : Pls fix plate position on chamber 23(3/5) 54(6-9) VD AN GF July 7, 2025 at 2:26 AM, Mohammad Amir : Dear Sir @지석범PM (이반차FA) , Below is the analysis results:- Following carrier is not available because we didn't receive this carrier from MES side to RTD side :- 1:-MLC4028 Following carrier are not available because there lot count is less than 6,it should be 6 so that it can go to next process:- 1:-MLC4110-Lot count is 1 <6. 2:-MLC4193-Lot count is 3<6. Following carrier are not available because it is on hold from RTD side because it had some duplicated magazine :- MLC3110,3150,2247,40 July 7, 2025 at 2:27 AM, 지석범PM (이반차FA) : Thank you so much July 7, 2025 at 2:28 AM, Mohammad Amir : You are most welcome, Sir! July 7, 2025 at 2:28 AM, 지석범PM (이반차FA) : @이한웅(삼구) 참고하시면 될 것 같습니다~ July 7, 2025 at 2:45 AM, Mohammad Amir : @FA Please check NC CA RTV01,there is a reel LTC0636 located on it and it is not moving and blocking further reels delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! July 7, 2025 at 2:47 AM, Mohammad Amir : @Manufacturing @P.Bence A SSL Please check MLA40450 located at C1CNV072_M04 for this carrier Magazine MA3473 is not closed. Thank you very much! July 7, 2025 at 2:49 AM, Mohammad Amir : @FA Please check this issue on priority,there is a severe shortages of CA reels. Production is getting affected. Thank you very much! July 7, 2025 at 2:53 AM, Mohammad Amir : @FA Please check C1STKA71_C02 there is Fork #1 center error when first active. Thank you very much! July 7, 2025 at 2:53 AM, N.Zoli F.A. : Works July 7, 2025 at 2:54 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 2:54 AM, Mohammad Amir : @N.Zoli F.A. Please check this issue as well. Thank you very much! July 7, 2025 at 3:10 AM, Mohammad Amir : @FA Please check C1CNV071_12019(Anode side) there is Run Time over error and it is blocking materials recovery. Thank you very much! July 7, 2025 at 3:11 AM, Mohammad Amir : This message was deleted. July 7, 2025 at 3:12 AM, Mohammad Amir : @Manufacturing @P.Bence A SSL Please check and remove 1+3 carries from C1CNV072_M04 it is decreasing stacking materials delivery speed. Thank you very much! July 7, 2025 at 3:13 AM, Mohammad Amir : Also, Please check and remove 1+2 carriers from M01_CNV072 as well. Thank you! July 7, 2025 at 3:21 AM, 이한웅(삼구) : The three plates — MLC4028, MLC4110, and MLC4193 — are showing as normal in the MES system. I will take them out from the warehouse and put them back in again. July 7, 2025 at 3:22 AM, 이한웅(삼구) : 넵 감사합니다. 중복 매거진은 IT Ticket 작성 하겠습니다. July 7, 2025 at 3:22 AM, Mohammad Amir : Sure Sir, please try and afterwards let me know,I will check again. Thank you very much! July 7, 2025 at 3:22 AM, Chinges Fa : MCS please check ST Anode AGV#10 idle July 7, 2025 at 3:22 AM, Mohammad Amir : Sure, Checking July 7, 2025 at 3:25 AM, Mohammad Amir : Issue has been resolved ✅ Now,AGV#10 has started to move. Thank you! July 7, 2025 at 3:28 AM, Chinges Fa : Thank you very much July 7, 2025 at 3:28 AM, Mohammad Amir : @Chinges Fa Please check C1STKA72_P11/12 there is light curtain error and job for AGV#4 VD AN is getting delayed. Thank you very much! July 7, 2025 at 3:28 AM, Mohammad Amir : You are most welcome! I am glad to assist you. July 7, 2025 at 3:33 AM, 이한웅(삼구) : Please check if the three plates are available for ST use! July 7, 2025 at 3:33 AM, Mohammad Amir : Sure, Checking. July 7, 2025 at 3:34 AM, Chinges Fa : Done July 7, 2025 at 3:35 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 3:39 AM, Mohammad Amir : Sir, There is no change and we still did not receive MLC4028 from the MES side. And for MLC4110,MLC4193,the lot count is still less than 6 so that's why these materials still cannot proceed to the next process(Stackcking). Thank you very much! July 7, 2025 at 3:41 AM, 이한웅(삼구) : Thank you! @지석범PM (이반차FA) PM님 이거 사유를 모르겠는데 수동으로 꺼내서 사용해도 괜찮나요? July 7, 2025 at 3:41 AM, Mohammad Amir : You are most welcome! July 7, 2025 at 3:48 AM, Mohammad Amir : @Manufacturing, You are receiving Error for MLC2048 from C1CNV072_M02 because magazine MC5309 is not closed , please check and try again. Thank you very much! July 7, 2025 at 3:54 AM, Victory : NC CA GF Line 2.3 Kindly assign AGV to come to pick up the full MGZ Tks July 7, 2025 at 3:55 AM, Chinges Fa : This message was deleted. July 7, 2025 at 3:55 AM, Chinges Fa : Now it’s good July 7, 2025 at 3:55 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 06 ,CA:00 Pre-Stk ➤ VD AN: 01,CA: 04 Post-Stock ➤ Stacking AN: 93, CA: 35 VD AN (Process Breakdown) UR: 16,Drying: 112,LR: 16, Wait:56,OOS: 08 VD CA (Process Breakdown) UR: 32,Drying: 124,LR: 20,Wait:00, OOS:04 Thank you very much! July 7, 2025 at 3:55 AM, Mohammad Amir : Sure Checking! July 7, 2025 at 3:55 AM, Mohammad Amir : Thank you very much! July 7, 2025 at 3:57 AM, Mohammad Amir : Issue has been resolved ✅. AGV#4 has been assigned to pick full magazine ✅. Thank you very much! July 7, 2025 at 4:00 AM, 이한웅(삼구) : @박태영 안녕하세요. 중복 매거진 이슈로 인해 RTD Hold된 플레이트 현지 SL 통해서IT Ticket 작성 하였습니다. 최근 중복 매거진으로 UNK 잡힌 플레이트 없는 걸로 보아 Hold 해제 해도 괜찮을거 같습니다. 확인 부탁드립니다. July 7, 2025 at 4:23 AM, Hồng Anh SL NC&VD 1F : @Mohammad Amir hello, i checked and saw in AN side VD-ST warehouse we have some mgz in warehouse very long time. can you pls check mgz status same for CA side pls? July 7, 2025 at 4:24 AM, Mohammad Amir : Sure, Checking! July 7, 2025 at 4:26 AM, Mohammad Amir : Could you please share IDs of such carriers. I will analyze the cause. Thank you very much! July 7, 2025 at 4:34 AM, Mohammad Amir : This message was deleted. July 7, 2025 at 4:36 AM, Mohammad Amir : Overview:- For your information:- Currently we have 237 CA Stacking materials but after filteration from RTD,there is just 51 which is appropriate for next process Stacking. And for AN, We have 267 plates but after filteration only 116 is appropriate for stacking process. With actual id ,i can better guide you about the issue and how to solve it. Thank you very much! July 7, 2025 at 4:49 AM, N.Zoli F.A. : @Mohammad Amir There is no magazine on port C0PVA010_P06. Can you please delete the magazine numbers from port mcs? July 7, 2025 at 4:49 AM, Mohammad Amir : Sure, Checking July 7, 2025 at 4:50 AM, Mohammad Amir : Data has been updated successfully in MCS RTD database. ✅ Thank you very much! July 7, 2025 at 4:51 AM, N.Zoli F.A. : Thank you very much. July 7, 2025 at 4:52 AM, Mohammad Amir : You are most welcome! July 7, 2025 at 4:54 AM, Nadiia Arkhipova : Please check, agv machine #2 stopped 5 line stk10 July 7, 2025 at 5:48 AM, Hữu Thắng : Good morning ! @FA NC CA AGV#1 error . Plz check it . thanks July 7, 2025 at 6:12 AM, Khaliun/Ivancsa FA : @MCS Please delete the NC CA AGV#1 double count job, thank you. July 7, 2025 at 6:13 AM, QuangPhan : Good mornig! @FA @AGV . VD An 1-4 the plates was wrong position . Please use AGV to fix it . thank you! July 7, 2025 at 6:15 AM, duzzaman Md (MCS) : Transfer initiated. Thank you July 7, 2025 at 6:16 AM, Khaliun/Ivancsa FA : Thank you! July 7, 2025 at 6:26 AM, Hữu Thắng : The problem occurred . Plz check it . Thx July 7, 2025 at 6:26 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 15 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 3 ———————————— Electrode (5) Marsi Gábor Pálosi Róbert Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(3) Nagy Tamás Gégény Dávid Pintye Miklós ———————————— Assembly GF(4) Győri József Kertész Dani Kovács Ágnes Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 7, 2025 at 6:27 AM, Hồng Anh SL NC&VD 1F : MLA4119 6101 1192 1120 2042 1211 6226 1144 6058 6321 6106 6231 6107 6072 6105 6240 6100 4070 6078 6111 4226 0193 4173 3060 6163 2095 3053 4061 3003 6042 0236 4065 6102 0144 6076 6235 Pls check for this plates ID All of this plate full mgz are stay in warehouse AN GF ST-VD long time. Pls help me for check status. Thank a lot! July 7, 2025 at 6:29 AM, duzzaman Md (MCS) : On it July 7, 2025 at 6:31 AM, QuangPhan : Good moring! @MCS Could you please check RTV - NC AN. We didn’t recieved material for a while. Thanks. July 7, 2025 at 6:33 AM, duzzaman Md (MCS) : This message was deleted. July 7, 2025 at 6:34 AM, duzzaman Md (MCS) : It started to get materials again. Thank you July 7, 2025 at 6:34 AM, Hữu Thắng : Good morning . Can you share it again . Thank you July 7, 2025 at 6:38 AM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 14 ,CA:02 Pre-Stk ➤ VD AN: 03 ,CA: 05 Post-Stock ➤ Stacking AN: 64, CA: 38 VD CA (Process Breakdown) UR: 00,Drying: 132,LR: 24,Wait:12, OOS:04 VD AN (Process Breakdown) UR: 00,Drying: 112,LR: 08, Wait:32,OOS: 08 Thank you very much! July 7, 2025 at 7:28 AM, duzzaman Md (MCS) : Please find the below information : MLA4119, 1192, 1120, 2042, 1211, 6226, 1144, 6321,6240, 4173, 3060, 6163, 2095, 3053, 4061, 3003, 6042, 0236, 4075, 6: RTD do not have the info from MES 6101, 6058, 6106, 6107, 6072, 6105,6100, 4070, 6078, 6111, 4226, 0193, 6102, 0144, 6076, 6235: Same or duplicated magazines Thank you ! July 7, 2025 at 7:45 AM, QuangPhan : Hello! @FA @AGV . VD An 4-5 and 5-5 the plates was wrong position . Please use AGV to fix it . thank you! July 7, 2025 at 7:48 AM, 이한웅(삼구) : @심재훈 @KIM SEYEON [김세연]_FA 안녕하세요. 갑자기 음/양극 동시에 이런 문제가 많이 발생했는데 MES 문의 가능할까요? July 7, 2025 at 7:51 AM, 박태영 : RTD hold라면 중복 바코드가 원인입니다 July 7, 2025 at 7:56 AM, 박태영 : 최근에 중복바코드가 발행된 것이 많다고 들었는디 그 원인확인해주시는것도 중요합니다 July 7, 2025 at 7:56 AM, 이한웅(삼구) : 중복 매거진이 맞는건가요? 중복 매거진의 경우 창고에 UNKMZ??였나 이런식으로 UNK 생성되는데 UNKDUP(중복 플레이트)는 많이 발생해서 처리 했는데 중복 매거진의 거의 못봐서요. July 7, 2025 at 7:58 AM, 박태영 : RTD hold 는 현재 중복 매거진만 잡고있습니다 July 7, 2025 at 7:58 AM, 박태영 : 중복매거진이 July 7, 2025 at 7:59 AM, 박태영 : 한 창고에서 발생되면 말씀하긴것과같이 UNK로 잡지만 다른 창고에 있는경우에는 잡을 수 없기 때문에 RTD 에서 Hold 를 잡아줍니다 July 7, 2025 at 8:01 AM, 이한웅(삼구) : 플레이트 ID 중복의 경우 다른 창고에 있어도 UNK로 잡지만 중복 매거진의 경우 한 창고에서 중복 매거진이 있으면 UNK로 생성 되지만 중복 매거진이 다른 창고에 있으면 UNK 생성이 안되는건가요? July 7, 2025 at 8:02 AM, 박태영 : 그렇습니다 July 7, 2025 at 8:02 AM, 박태영 : 플레이트도 마찬가지입니다 July 7, 2025 at 8:02 AM, 박태영 : SCS 는 자기현재 상태만 알고 다른 SCS 상태는 몰러요 July 7, 2025 at 8:03 AM, 박태영 : 그래서 현재상태를 봐서 정상이라고 판단하시는것은 위험할수 있어서 VD 끝나있는 상태라고해도 재건조 하시는것이 안전하다고 의견드리겠습니다 July 7, 2025 at 8:05 AM, 이한웅(삼구) : 중복 플레이트 UNK 생성되어 RTD 검색하면 스택 스테이션이랑 창고에 중복으로 있고 또는 1F, GF 창고에 동시 표시되는건 다른 사유 인가요? July 7, 2025 at 8:08 AM, 박태영 : 마찬가지로 잘못 발행한 것이라고 추측합니다. 이 경우 위치를 이반차FA 에서 제조에 제공하면 제조에서 중복으로 바코드 발행한 사유 확인하시고 재발행하여 부착하셔야 합니다 July 7, 2025 at 8:10 AM, 이한웅(삼구) : 사유는 확인해서 현지 인원 중 특정 인원만 바코드 프린트하게 하고 있습니다. 제가 궁금한건 다른 창고에 중복 플레이트, 매거진 있으면UNK 생성이 안된다고 하셨는데 다른 창고에 있어도 중복으로 UNK 생성되는건 다른 사유가 있는건지 문의 드리는겁니다. July 7, 2025 at 8:11 AM, 박태영 : UNK 가 중복 바코드로만 생성되는 것은 아니고 입고시 읽지 못하였거나 하는 경우도 UNK 로 들어옵니다 July 7, 2025 at 8:11 AM, 박태영 : DUP 로 생성된 건이 중복바코드입니다 July 7, 2025 at 8:11 AM, 박태영 : UNKDUP July 7, 2025 at 8:12 AM, 이한웅(삼구) : 네네 UNK 뒤에 붙어있는거에 따라 생성 사유가 다르다는건 알고 있습니다. 근데 한창고에 없으면 UNK 생성이 안된다고 하셔서요. July 7, 2025 at 8:14 AM, 박태영 : DUP 입니다 중복바코드는 July 7, 2025 at 8:15 AM, 박태영 : UNK 발생원인은 다양합니다 July 7, 2025 at 8:30 AM, 김 민성 : 6101, 6058, 6106, 6107, 6072, 6105,6100, 4070, 6078, 6111, 4226, 0193, 6102, 0144, 6076, 6235 Plate는 중복의 사유로 RTD Hold 상태이며 건조 완료로 보이나 재건조가 권장됩니다. ㄴ FA에서 메일로 인폼 예정 July 7, 2025 at 8:34 AM, 이한웅(삼구) : 아 그러면 MCS 분이 매거진 중복이라고 하셨는데 매거진 중복이 아닌 플레이트 중복인거죠? July 7, 2025 at 8:35 AM, 김 민성 : MLA 2095 3003 3053 3060 4061 4173 6163 6240 Plate는 중복의 사유로 RTD Hold 상태이며 건조 완료로 보이나 재건조가 권장됩니다. ㄴ FA에서 메일로 인폼 예정 4075 4076 공매거진 상태로 조립되어있는데 RTD내 데이터가 없으므로 출고 후 재입고 필요. 0236 1120 1144 1192 1211 2042 는 RTD 보류 상태도 아니며 건조완료 상태로 반송명령이 생기면 가능한데 내부 상태를 좀 더 보고 코멘트 드리겠습니다. July 7, 2025 at 8:36 AM, 이한웅(삼구) : 제가 잘 이해가 안된 부분이 매거진 중복의 경우 2개중 하나는 덮어쓰기되어 노칭 생산 이력이 없어야 하는데 전부 노칭 이력이 있어서요. July 7, 2025 at 8:36 AM, 김 민성 : RTD 보류 대상은 3건입니다. 1. UNK 2. 중복 plate 3. 건조된 magazine이 중복으로 plate내에 조립된상태 July 7, 2025 at 8:36 AM, Sazzad Bhai SKon : Hello pm, product definition id are different, for example MLA6240 July 7, 2025 at 8:40 AM, 이한웅(삼구) : 어떤 매거진이 중복인지 확인 가능한가요? July 7, 2025 at 8:42 AM, 이한웅(삼구) : 매거진 중복의 경우 2개중 한개가 노칭으로 오게 되면 매거진 상태 조회 시 가장 최근 이력만 검색이 되고 기존 이력은 없어져야 정상입니다. July 7, 2025 at 8:42 AM, 이한웅(삼구) : 노칭에서 중복 매거진이 투입되어 생산 진행한 경우에요. July 7, 2025 at 8:44 AM, 김 민성 : 전창고에서 정상적으로 출하될때만 캐리어 정보를 초기화 하는 특정상황이 아닌 상태에서 실물만 공매거진으로 인식 된 상황으로 보입니다. July 7, 2025 at 8:44 AM, 김 민성 : Mes적으로 매거진 재사용 가능 시점을 알려주실 수 있나요? July 7, 2025 at 8:44 AM, 이한웅(삼구) : 오늘도 창고 정리하며 노칭 생산 이력에 다른 설비에 동일 매거진 ID가 생산 된 경우 스택 마감 조회-> 매거진 상태 조회하면 가장 최근 정보만 조회 가능하고 기존 매거진은 노칭 실적에서만 조회 가능하고 다른 하나는 플레이트 맵핑 된거에 릴 아이디 없이 매거진 아이디만 표시됩니다. July 7, 2025 at 8:45 AM, 김 민성 : RTD는 전창고에서 공매거진으로 노칭방향으로 출고시 초기화 됩니다. July 7, 2025 at 8:46 AM, Hữu Thắng : Can you please share it again . Thank you July 7, 2025 at 8:51 AM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 05 ,CA:00 Pre-Stk ➤ VD AN: 01 ,CA: 00 Post-Stock ➤ Stacking AN: 52, CA: 67 VD CA (Process Breakdown) UR: 12,Drying: 128,LR: 40 ,Wait:28, OOS:04 VD AN (Process Breakdown) UR: 20, Drying: 108, LR: 04, Wait:20,OOS: 08 Thank you very much! July 7, 2025 at 8:51 AM, 이한웅(삼구) : Ca 4-2 EC1P073F7208312B MC6587 13:12 생산 4-1 EC1P073F7208423A MC6587 13:35 생산 이건 전창고에 매거진 이력이 없던건데 후창고도 매거진 중복의 경우 기존 이력이 매거진 상태 조회에서 확인하면 없어져야 하는데 금일 제가 후창고 장기 체류 매거진 상태 조회 시 모든 매거진이 투입 가능 상태로 조회 되었습니다. July 7, 2025 at 8:53 AM, 이한웅(삼구) : 이거 하나하나 매거진 상태 조회 해봤는데 중복이면 6개중에 생산 시간이 달라야 하는데 대부분 생산 시간이 이어집니다. July 7, 2025 at 8:55 AM, 김 민성 : 지금 핵심이 무엇일까요? 1) 노칭에 공매거진을 투입하고 싶으나 안된다 2) 스태킹에 투입하고 싶으나 안된다 3) VD를 건조가 필요한데 자동반송이 안 된다 4) VD 완료 후 스태킹으로 자동반송이 안 된다 5) VD 완료 후 자동 반송이 되어 스태킹 앞 or 장비 안에 있는데 투입이 안 된다. July 7, 2025 at 8:57 AM, 김 민성 : 제가 오전10시30분 이 후로 조립동 내방 가능 합니다. July 7, 2025 at 8:58 AM, 이한웅(삼구) : 4) VD 완료 후 스태킹 반송 가능 자재로 잡히지 안되서 그렇습니다. 실제 후창고 자재와 반송 가능자재 수량의 차이가 오늘 확인한게 음/양극 20개 이상 차이가 나서요. July 7, 2025 at 9:00 AM, 김 민성 : This message was deleted. July 7, 2025 at 9:01 AM, 김 민성 : This message was deleted. July 7, 2025 at 9:02 AM, 김 민성 : 반대였네요 MLA 1211 2042 1120 수분검사 필요 1144 1192 0235 후창고내 대기 상태 July 7, 2025 at 9:05 AM, 이한웅(삼구) : 음극은 현지 인원에게 교육하고 해보라고 했는데 제가 제대로 못알려준거 같네요. 다시 교육 하겠습니다... July 7, 2025 at 9:29 AM, 이한웅(삼구) : @이도형 (Lee) @정은탁 (Jung EunTak) 이거 확인하셔서 수분 측정값 입력 요청해주세요. 건조 후 14일 지났으면 리워크 부탁드립니다. July 7, 2025 at 10:43 AM, duzzaman Md (MCS) : @Manufacturing Please check and remove 1+2 carriers from M01_C1CNV072 Thank you! July 7, 2025 at 11:00 AM, Khaliun/Ivancsa FA : @Lajos Gábor F.A. ST CA AGV#9 Check pls July 7, 2025 at 11:25 AM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 21 ,CA:03 Pre-Stk ➤ VD AN: 02 ,CA: 01 Post-Stock ➤ Stacking AN: 53, CA: 48 VD CA (Process Breakdown) UR: 00,Drying: 148,LR: 20 ,Wait:12, OOS:04 VD AN (Process Breakdown) UR: 04, Drying: 108, LR: 12, Wait:36,OOS: 08 Thank you very much! July 7, 2025 at 11:29 AM, 정은탁 (Jung EunTak) : 건조일 기준 리워크 대상 (14일 초과): · MLA1211 (6월 10일) · MLA2042 (6월 10일) · MLA1120 (6월 10일) · MLA1144 (6월 16일) · MLA1192 (6월 10일) → 총 5플레이트, 금일 리워크 진행 하겠습니다. 재고 미확인 건: · MLA0235 – 후창고 실물 없음 July 7, 2025 at 11:31 AM, QuangPhan : Hello! @FA @AGV . VD An 4-5 and 5-5 the plates was wrong position . Please use AGV to fix it . thank you! July 7, 2025 at 11:31 AM, 박태영 : 이 건은 저희가 의견을 드릴수는 있지만 판단주체는 제조이고 저희는 의견만 드릴뿐입니다. July 7, 2025 at 11:47 AM, Yon Ko/연커/ : Both done. July 7, 2025 at 11:49 AM, Hữu Thắng : @FA VD CA AGV#1 stopped . Plz check July 7, 2025 at 11:53 AM, Yon Ko/연커/ : @MCS VD CA chamber 5-6 is closed Pls delete AGV’s job July 7, 2025 at 11:57 AM, duzzaman Md (MCS) : Job has been deleted. Thank you July 7, 2025 at 11:59 AM, Hữu Thắng : Agv#5 stopped Line 6 . Plz check it . Thanks July 7, 2025 at 12:58 PM, Hữu Thắng : @MCS Can you please delete job VD CA 6/5 - VD CA 6/3 . Thank you July 7, 2025 at 12:59 PM, Hữu Thắng : @FA VD CA Line 6/8 agv#7 error . Plz check it July 7, 2025 at 1:04 PM, duzzaman Md (MCS) : There is no active job from 6-5. Jobs from 6-3 are are deleted. Thank you July 7, 2025 at 1:08 PM, Hữu Thắng : Thank you July 7, 2025 at 1:31 PM, 김동섭 : Ca VD 6-4 AGV STOP July 7, 2025 at 1:41 PM, Hữu Thắng : @Mcs Could you please check VD CA LR 6/5 plz July 7, 2025 at 1:44 PM, duzzaman Md (MCS) : There's LR. Can't find best lot. Thank you July 7, 2025 at 2:12 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Please check the CA VD 5-6 p01 p02, if these carriers have to be transferred to c72. Please create the job. Thanks July 7, 2025 at 2:16 PM, 김지수PM(Gyuri)_FA : @fa please check c1cnv072 16086 track. Thanks July 7, 2025 at 2:17 PM, duzzaman Md (MCS) : It was deleted from CIM side. But still existed in MCS Deleting and creating a new transfer. July 7, 2025 at 2:20 PM, duzzaman Md (MCS) : New job created. Thank you July 7, 2025 at 2:34 PM, Zaya/ivancsa FA : @duzzaman Md (MCS) VD CA Chamber 5-6 closed, Can you delete job AGV10? July 7, 2025 at 2:38 PM, duzzaman Md (MCS) : Deleted. Thank you July 7, 2025 at 3:06 PM, Jun(정우준)_SKOH FA : @duzzaman Md (MCS) can you check available lot? July 7, 2025 at 3:12 PM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 22 ,CA:04 Pre-Stk ➤ VD AN: 02 ,CA: 01 Post-Stock ➤ Stacking AN: 75, CA: 54 VD CA (Process Breakdown) UR: 08,Drying: 128,LR: 12 ,Wait:28, OOS:08 VD AN (Process Breakdown) UR: 16, Drying: 76, LR: 32, Wait:64,OOS: 12 Thank you very much! July 7, 2025 at 4:06 PM, duzzaman Md (MCS) : @FA Please check C1STKA71_P22 it's oos Thank you July 7, 2025 at 4:08 PM, Kovács Ágnes : Solved July 7, 2025 at 4:23 PM, QuangPhan : Hello! @FA @AGV . VD An 1-5 the plates was wrong position . Please use AGV to fix it . thank you! July 7, 2025 at 4:35 PM, Zulaa/졸라/Ivancsa FA : Done July 7, 2025 at 4:37 PM, 정은탁 (Jung EunTak) : @MCS/RTD System · MLA1211 · MLA2042 · MLA1120 · MLA1144 · MLA1192 Has the 5 plate Hold been released? July 7, 2025 at 4:40 PM, duzzaman Md (MCS) : All of these has been released from hold status. July 7, 2025 at 4:48 PM, 이도형 (Lee) : @FA 음극 회수물류 알람발생 July 7, 2025 at 4:52 PM, Hữu Thắng : @FA NC CA IN CV 1/1 errror . Can you plz check it July 7, 2025 at 4:52 PM, duzzaman Md (MCS) : @FA Please check C1STKA72_P22 Auto step time over error. Thank you! July 7, 2025 at 4:54 PM, Baek Hojong(백호종)FA : @duzzaman Md (MCS) Gf next Lot quantity? Now check plz July 7, 2025 at 5:00 PM, Hữu Thắng : @Kertész Dániel Could you please come hete July 7, 2025 at 5:03 PM, duzzaman Md (MCS) : Dear @Baek Hojong(백호종)FA GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 18 ,CA:03 Pre-Stk ➤ VD AN: 00 ,CA: 00 Post-Stock ➤ Stacking AN: 62, CA: 65 VD CA (Process Breakdown) UR: 24,Drying: 132,LR: 08 ,Wait:40, OOS:04 VD AN (Process Breakdown) UR: 12, Drying: 76, LR: 40, Wait:60,OOS: 08 Thank you very much! July 7, 2025 at 5:19 PM, 이도형 (Lee) : @Baek Hojong(백호종)FA PM님 VD AN 4-9 AGV로 후창고 투입해주십시요. July 7, 2025 at 5:51 PM, Hữu Thắng : @FA NC CA AGV#5 stopped . Plz check July 7, 2025 at 6:02 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(0): Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 7, 2025 at 6:18 PM, VK (mcs) : @FA Good evening There is transport job to the cathode reel conveyor C52 -M07(9034) But port direction is output. Please check it. July 7, 2025 at 6:49 PM, 최명운(CHOI MYOUNGWOON) : @MCS Please delete GF Ca VD AGV#5 JOB. VD 2-1P03,04 is currently under construction. July 7, 2025 at 6:50 PM, Dariimaa/다리마/Ivancsa : @MCS good evening VD CA 2-1 chamber door is closed. Please delete the job. Thank you! July 7, 2025 at 6:50 PM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) NC Ca 1-1 공매거진 input C/V 확인부탁드립니다. Spanel01Fan02 Error July 7, 2025 at 6:53 PM, MCS/RTD System : AGV 5 has not a job July 7, 2025 at 6:55 PM, MCS/RTD System : Transport jobs canceled July 7, 2025 at 7:01 PM, 김현태 : @FA NC AN 4-3 Port 4 Check please July 7, 2025 at 7:01 PM, 최명운(CHOI MYOUNGWOON) : 셔틀에 있던 매거진 위치를 감지센서 쪽으로 살짝 옮긴 후에 에러 해제 됐고 현재 가동 중입니다 July 7, 2025 at 7:02 PM, Dariimaa/다리마/Ivancsa : VD CA AGV#10 idle. Please check July 7, 2025 at 7:09 PM, MCS/RTD System : Job created July 7, 2025 at 8:04 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Please increase the priority of c1stka71_p21 (12003) for a while July 7, 2025 at 8:05 PM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 2-9 VD CA and send it back to warehouse, thank you July 7, 2025 at 8:08 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 22 ,CA:19 Pre-Stk ➤ VD AN: 00 ,CA: 01 Post-Stock ➤ Stacking AN: 54 , CA: 38 VD CA (Process Breakdown) UR: 00,Drying: 116 ,LR: 06 ,Wait:24, OOS:08 VD AN (Process Breakdown) UR: 00 ,Drying: 120 ,LR: 22, Wait:56 ,OOS: 08 July 7, 2025 at 8:10 PM, MCS/RTD System : Priority increased July 7, 2025 at 8:11 PM, 김지수PM(Gyuri)_FA : Thanks July 7, 2025 at 8:19 PM, 김지수PM(Gyuri)_FA : Vc01 vc09 were assigned! July 7, 2025 at 8:24 PM, 김지수PM(Gyuri)_FA : @Uyanga FA please check it. Thanks! July 7, 2025 at 8:27 PM, Uyanga FA : This message was deleted. July 7, 2025 at 8:42 PM, Natsag/ Ivansca FA : VD AN chamber# 6-2 LD/UD alarm pls check . Thank you July 7, 2025 at 8:44 PM, Nguyen Huy : This message was deleted. July 7, 2025 at 9:05 PM, 박시우 : @FA Please check NC AN #3,8,9 They are stopped for long time July 7, 2025 at 9:06 PM, Dániel Hufnágel : AGV#3 and AGV#8 are under maintenance, please be patient! July 7, 2025 at 9:07 PM, Tasnim / Ivancsa FA : AGV#9 is working now.. July 7, 2025 at 9:13 PM, Natsag/ Ivansca FA : VD AN chamber# 6-2 LD/UD alarm pls check . Thank you July 7, 2025 at 9:20 PM, 최명운(CHOI MYOUNGWOON) : The VD barcode reader position was slightly adjusted. It's going well now. July 7, 2025 at 9:22 PM, Cao thi my linh : Hello: Please help AN0DE side The film roll is very slow, we don't have spare film roll to produce, thanks July 7, 2025 at 9:24 PM, Natsag/ Ivansca FA : @MCS ST AN AGV#10 idle. Please check Thank you! July 7, 2025 at 9:25 PM, Nguyen Huy : @VK (mcs) pls check July 7, 2025 at 9:29 PM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 2-4 and 1-5 VD CA and send it back to warehouse, thank you July 7, 2025 at 9:31 PM, VK (mcs) : Do you asking reel for anode Notching area? July 7, 2025 at 9:31 PM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check. July 7, 2025 at 9:33 PM, Dariimaa/다리마/Ivancsa : @VK (mcs) NC CA AGV#2 idle. Please check July 7, 2025 at 9:35 PM, 김지수PM(Gyuri)_FA : Created the job! July 7, 2025 at 9:35 PM, VK (mcs) : Transport job created July 7, 2025 at 9:36 PM, VK (mcs) : Is it cathode? July 7, 2025 at 9:40 PM, Cao thi my linh : Igen: Több AN orsóra van szükségem, kérlek segítsetek. Ideiglenesen leállítunk néhány gépet az orsó hiánya miatt. Köszönöm. July 7, 2025 at 9:42 PM, VK (mcs) : There is no available material. Right now just 1 carrier is heading to M10 July 7, 2025 at 9:47 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 50 ,CA:01 Pre-Stk ➤ VD AN: 00 ,CA: 30 Post-Stock ➤ Stacking AN: 60 , CA: 09 VD CA (Process Breakdown) UR: 08,Drying: 108 ,LR: 04 ,Wait:00, OOS:28 VD AN (Process Breakdown) UR: 08 ,Drying: 116 ,LR: 04, Wait:80 ,OOS: 08 July 7, 2025 at 10:07 PM, 최명운(CHOI MYOUNGWOON) : @인제(Hwang) VD Ca 1번챔버 AGV 충전기 주변에 오시면 홀드 풀매거진 8개 있습니다 July 7, 2025 at 10:07 PM, 인제(Hwang) : 확인 및 리워크 처리 후 공유드리겠습니다 July 7, 2025 at 10:10 PM, 박시우 : @FA Can you turn Manual and Auto mode lever a NC AN AGV#3? AGV #1,4 can't move in Loading point for long time. I think #3 location is missing on Loading point July 7, 2025 at 10:12 PM, Dániel Hufnágel : Yes i will go there and check it! July 7, 2025 at 10:12 PM, 최명운(CHOI MYOUNGWOON) : 리스트 순서입니다 MLC 1-2061 2-2128 3-2177 4-2183 5-2247 6-2250 7-3005 8-3063 July 7, 2025 at 10:13 PM, 최명운(CHOI MYOUNGWOON) : @인제(Hwang) July 7, 2025 at 10:13 PM, VK (mcs) : @FA Problem still not solved. Please check it. Thx July 7, 2025 at 10:21 PM, VK (mcs) : Can someone check Circular conveyor C1CNV072-Port 31 (16027) Is there any actual carrier? July 7, 2025 at 10:22 PM, Zsolt F.A. : Probably PLC problem, then it has to wait unti the morning shift. But before that, we will try to restart the system as soon as the production fall behind a littlebit. July 7, 2025 at 10:23 PM, VK (mcs) : Thanks for confirmation July 7, 2025 at 10:25 PM, Cao thi my linh : Igen, köszönöm July 7, 2025 at 10:33 PM, Dariimaa/다리마/Ivancsa : MLA3091 July 7, 2025 at 10:34 PM, VK (mcs) : Thanks for confirmation July 7, 2025 at 10:39 PM, 최명운(CHOI MYOUNGWOON) : 9-3072 10-3086 11-3098 12-3110 13-3150 14-3159 15-3220 16-4069 까지 가져다 놓았고 10개 더 추가 하면 Ca는 끝납니다 July 7, 2025 at 10:55 PM, VK (mcs) : @Manufacturing There are 4 transport jobs to the VD cathode 6/8 , but machine is out of service and carriers are waiting in the STK output ports. Please confirm. July 7, 2025 at 10:59 PM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 1-7 VD CA and send it back to warehouse, thank you July 7, 2025 at 11:00 PM, VK (mcs) : @Nguyen Huy Do you have any information about this machine? VD CA 6/8 July 7, 2025 at 11:05 PM, Nguyen Huy : This was supposed to be a test chamber but for some reason Samkoo delayed it to tomorrow and these chambers were told to be stopped until further information July 7, 2025 at 11:05 PM, VK (mcs) : @FA Can you please check Circular conveyor C1CNV072 port 31(16027) Is there MLC4205 with empty status? July 7, 2025 at 11:05 PM, VK (mcs) : Thanks for confirming July 7, 2025 at 11:06 PM, Dariimaa/다리마/Ivancsa : @Natsag/ Ivansca FA Please check July 7, 2025 at 11:10 PM, Natsag/ Ivansca FA : yes July 7, 2025 at 11:11 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 4plates out from the c1cnv072 m01, thanks July 7, 2025 at 11:12 PM, 최명운(CHOI MYOUNGWOON) : 17-4189 18-4211 19-4213 20-4252 21-6008 22-6034 23-6052 24-6244 25-6382 26-6393 총 26개 입니다 @인제(Hwang) July 7, 2025 at 11:17 PM, 김지수PM(Gyuri)_FA : @제조 GF양극 RTV > 리프트 점검으로 인해, 풀릴 공급 지연이 발생할 수 있습니다. 양해 부탁드리겠습니다. 감사합니다. July 7, 2025 at 11:23 PM, 전 운 (Jeon Woon) : Please rechecking July 7, 2025 at 11:30 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 01 Pre-Stk ➤ Notching AN: 62 ,CA:00 Pre-Stk ➤ VD AN: 02 ,CA: 92 Post-Stock ➤ Stacking AN: 86 , CA: 00 VD CA (Process Breakdown) UR: 04,Drying: 72 ,LR: 00,Wait:00, OOS:24 VD AN (Process Breakdown) UR: 06 ,Drying: 84 ,LR: 06, Wait:112 ,OOS: 08 July 7, 2025 at 11:43 PM, 전 운 (Jeon Woon) invited 남의(NAM UI). July 7, 2025 at 11:44 PM, 김현태 : NC CA AGV #9 error Thanks July 7, 2025 at 11:45 PM, Tasnim / Ivancsa FA : It's working now.. July 8, 2025 at 12:41 AM July 8, 2025 at 12:41 AM, 전 운 (Jeon Woon) : Plz one more time checking July 8, 2025 at 12:46 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 52 ,CA:01 Pre-Stk ➤ VD AN: 02 ,CA: 134 Post-Stock ➤ Stacking AN: 79 , CA: 00 VD CA (Process Breakdown) UR: 00,Drying: 48 ,LR: 00,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 06 ,Drying: 96 ,LR: 02, Wait:100 ,OOS: 08 July 8, 2025 at 12:50 AM, 인제(Hwang) : 양극 VD 순환물류 확인부탁드립니다 July 8, 2025 at 12:51 AM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv072 > 13018 track Thanks July 8, 2025 at 12:53 AM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 1-6 and 6-5 VD CA and send it back to warehouse, thank you July 8, 2025 at 12:59 AM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check. July 8, 2025 at 1:02 AM, 김지수PM(Gyuri)_FA : @VK (mcs) please check it, now I'm creating plenty of jobs for holded carriers July 8, 2025 at 1:07 AM, Nguyen Huy : VD CA 4-5 also, thank you @VK (mcs) July 8, 2025 at 1:08 AM, VK (mcs) : Transport job created for VD CA 1/6 . VD 6/5 is out of service . @Dariimaa/다리마/Ivancsa As MCS can only create one job, there will be AGV error during unloading. VD cathode 1/6. July 8, 2025 at 1:14 AM, VK (mcs) : Transport job created. July 8, 2025 at 1:17 AM, 김지수PM(Gyuri)_FA : Could you please make vc05(ca vd) unload carriers to empty chamber? July 8, 2025 at 1:19 AM, 전 운 (Jeon Woon) : 1,2,3Line Stack Station 메뉴얼 상태입니다 참고 부탁드려요. @김지수PM(Gyuri)_FA July 8, 2025 at 1:19 AM, VK (mcs) : VD 6/9 is full? July 8, 2025 at 1:19 AM, 김지수PM(Gyuri)_FA : 네, 감사합니다. July 8, 2025 at 1:19 AM, 김지수PM(Gyuri)_FA : Yes July 8, 2025 at 1:20 AM, VK (mcs) : I will send them back to STK July 8, 2025 at 1:24 AM, Natsag/ Ivansca FA : VD CA chamber6-9 door is closed Please delete the job. Thank you! July 8, 2025 at 1:25 AM, 김지수PM(Gyuri)_FA : I deleted the job and send vc05 to 2-9 July 8, 2025 at 1:31 AM, 전 운 (Jeon Woon) : FA 몽골인원 어디갔나요? 한명도 없는데요 GF 5,6라인 AGV 멈춰서 길막고 있고 Ca ST 순환C/V Alarm 발생중입니다. @김지수PM(Gyuri)_FA July 8, 2025 at 1:31 AM, 김지수PM(Gyuri)_FA : 확인해보겠습니다... July 8, 2025 at 1:35 AM, Dariimaa/다리마/Ivancsa : all problems solved July 8, 2025 at 1:46 AM, 최명운(CHOI MYOUNGWOON) : @인제(Hwang) 음극 홀드 매거진 리스트입니다 MLA 1-0144 2-0193 3-2095 4-3003 5-3053 6-3060 7-4061 8-4070 July 8, 2025 at 1:57 AM, 김지수PM(Gyuri)_FA : @fa We have to put the carriers into vd chamber without LR from chamber Sorry for inconvenience 🥲 July 8, 2025 at 2:02 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 45 ,CA:00 Pre-Stk ➤ VD AN: 00 ,CA: 178 Post-Stock ➤ Stacking AN: 95 , CA: 00 VD CA (Process Breakdown) UR: 00,Drying: 20 ,LR: 02,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 04 ,Drying: 100 ,LR: 04, Wait:100 ,OOS: 08 July 8, 2025 at 2:18 AM, 최명운(CHOI MYOUNGWOON) : 9-4173 10-4226 11-6058 12-6072 13-6076 14-6078 15-6100 16-6101 17-6102 18-6105 19-6106 20-6107 21-6111 22-6163 23-6231 24-6240 음극 VD에 모두 출고했습니다 @인제(Hwang) July 8, 2025 at 2:37 AM, Nguyen Huy : @FA VD CA 6-2 the top left plate was being put in the wrong way by AGV, pls check July 8, 2025 at 2:43 AM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 2-8 and 4-2 VD CA and send it back to warehouse, thank you July 8, 2025 at 2:45 AM, Dariimaa/다리마/Ivancsa : @김지수PM(Gyuri)_FA Please check. July 8, 2025 at 2:46 AM, 카스텔 발라지 F.A. : @VK (mcs) Please instal LTC1383 to E0CNVC52_M07 The carrier is empty Thank you very much! July 8, 2025 at 2:47 AM, VK (mcs) : LTC1363? Right July 8, 2025 at 2:47 AM, 김지수PM(Gyuri)_FA : Is it impossible to raise the UR in 2-8 and 4-2 chamber? July 8, 2025 at 2:48 AM, 김지수PM(Gyuri)_FA : I checked there was no ur from the 2-8 after the drying process (21:38) July 8, 2025 at 2:48 AM, VK (mcs) : It has already got a job . Thx July 8, 2025 at 2:49 AM, 카스텔 발라지 F.A. : Yes, thank you! July 8, 2025 at 2:49 AM, Nguyen Huy : Yes because the QC check was NG and we have to rework it unfortunately July 8, 2025 at 2:51 AM, 김지수PM(Gyuri)_FA : Okay, thank you for let me know! July 8, 2025 at 2:53 AM, Nguyen Huy : The worst scenario is almost chambers could be decided as NG by QC, and we have to rework them all, so please prepare 🥲🥲 @김지수PM(Gyuri)_FA @VK (mcs) July 8, 2025 at 2:54 AM, 김지수PM(Gyuri)_FA : Created the jobs for 4-2 and 2-8 🫠 July 8, 2025 at 2:55 AM, 김지수PM(Gyuri)_FA : @VK (mcs) thanks bro, in advance July 8, 2025 at 2:56 AM, VK (mcs) : Anytime July 8, 2025 at 3:17 AM, 조한진(Jin) : Hello.Please rechecking July 8, 2025 at 3:21 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 41 ,CA:00 Pre-Stk ➤ VD AN: 01 ,CA: 177 Post-Stock ➤ Stacking AN: 109 , CA: 00 VD CA (Process Breakdown) UR: 11,Drying: 16 ,LR: 18, Wait:00, OOS:24 VD AN (Process Breakdown) UR: 06 ,Drying: 96 ,LR: 04, Wait:104 ,OOS: 08 July 8, 2025 at 3:41 AM, Uyanga FA : @mcs GF vd ca champer3-8 port 1, 2 full material agv-2 please check July 8, 2025 at 3:42 AM, 최명운(CHOI MYOUNGWOON) : @Tuya Ivancsa FA @Uyanga FA @Natsag/ Ivansca FA @Dariimaa/다리마/Ivancsa Please put VD Ca AGV error first. It's because most of the stacking stops because there's no anode. July 8, 2025 at 3:43 AM, VK (mcs) : Job cancelled July 8, 2025 at 4:00 AM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 1-8 and 2-3 VD CA and send it back to warehouse, thank you July 8, 2025 at 4:07 AM, VK (mcs) : Transport job for cathode 2/3 has been created. July 8, 2025 at 4:55 AM, 조한진(Jin) : @VK (mcs) please Check Next Available Lot. Thank you. July 8, 2025 at 4:57 AM, VK (mcs) : This message was deleted. July 8, 2025 at 4:57 AM, Nguyen Huy : @FA @MCS Hello, pls send AGV to take out materials from chamber 2-2, 1-3, 5-7, 6-2, 5-5 VD CA and send it back to warehouse, thank you July 8, 2025 at 4:58 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 09 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 201 Post-Stock ➤ Stacking AN: 130 , CA: 00 VD CA (Process Breakdown) UR: 00,Drying: 28 ,LR: 00, Wait:00, OOS:24 VD AN (Process Breakdown) UR: 11 ,Drying: 88 ,LR: 28, Wait:80 ,OOS: 08 July 8, 2025 at 5:04 AM, VK (mcs) : Transport job created for VD cathode 2/2 and 1/3 July 8, 2025 at 5:26 AM, Ivan Kasian Sl 5L 🥹 : Please check cv119 st Data mismatch error Thank you July 8, 2025 at 5:55 AM, Hữu Thắng : @FA VD CA Line 6 agv#5 stopped . Plz check July 8, 2025 at 5:56 AM, 정연동 left this chatroom. July 8, 2025 at 6:07 AM, 은향(OH EUN HYANG) : An NC Robot #3 Please check out the Hungarian technician July 8, 2025 at 6:08 AM, 은향(OH EUN HYANG) : The robot's not moving! July 8, 2025 at 6:23 AM, QuangPhan : Hello! @FA @AGV . VD An 1-8 the plates was wrong position . Please use AGV to fix it . thank you! July 8, 2025 at 6:30 AM, Baek Hojong(백호종)FA : @mcs GF Next Lot QUANTITY Availablity Please upload every 2 hours July 8, 2025 at 6:31 AM, Shakir (MCS) : Good morning Sure, Sir Thank you July 8, 2025 at 6:34 AM, Hữu Thắng : @FA NC CA RTV C2CNVC71 Tray Data mismatch . Plz check July 8, 2025 at 6:36 AM, Hữu Thắng : @FA VD CA AGV#3 error line 5/7 . July 8, 2025 at 6:40 AM, Shakir (MCS) : Good morning @All GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 01,CA: 199 Post-Stock ➤ Stacking AN: 137, CA: 09 VD AN (Process Breakdown) UR: 00 ,Drying: 108 ,LR: 04, Wait:60 ,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 48 ,LR: 00, Wait:00, OOS:24 Thank you July 8, 2025 at 6:51 AM, Chinges Fa : MCS please check VD Cathode AGV#1 empty there champer is empty delete job July 8, 2025 at 6:51 AM, Shakir (MCS) : Checking July 8, 2025 at 6:54 AM, Shakir (MCS) : Job has been cancelled successfully ✅ Thank you July 8, 2025 at 6:55 AM, Yon Ko/연커/ invited MJ/ Ivancsa FA. July 8, 2025 at 6:56 AM, Chinges Fa : Thank you very much July 8, 2025 at 7:07 AM, QuangPhan : Hello! @FA @AGV . VD An 1-8 and 1-4 the plates was wrong position . Please use AGV to fix it . thank you! July 8, 2025 at 7:11 AM, Yon Ko/연커/ : @Nandia FA @Chinges Fa @MJ/ Ivancsa FA July 8, 2025 at 7:17 AM, Chinges Fa : MCS please One magazine not good AGV command July 8, 2025 at 7:18 AM, Shakir (MCS) : Please write agv number or plate id July 8, 2025 at 7:18 AM, Jun(정우준)_SKOH FA : @Baek Hojong(백호종)FA 피엠님, 확인부탁드립니다. Vd an chamber 6-2 didn’t read barcode. July 8, 2025 at 7:21 AM, Chinges Fa : Now it’s good July 8, 2025 at 7:25 AM, Hữu Thắng : @FA VD CA AGV#6 is not moving . Plz check . July 8, 2025 at 7:28 AM, Yon Ko/연커/ : @Baek Hojong(백호종)FA hello could u please come and check VD AN C1CNV071.? Thank u! July 8, 2025 at 7:29 AM, Chinges Fa : Solved July 8, 2025 at 7:32 AM, QuangPhan : Good morning! @MCS VD 4-9. Cannot execute UR command. Please check. Could you please transfer chamber to warehose A72. Thank you. July 8, 2025 at 7:33 AM, Shakir (MCS) : Checking July 8, 2025 at 7:36 AM, 이도형 (Lee) : @FA NC Ca RTV is stopped. Please check. July 8, 2025 at 7:38 AM, Shakir (MCS) : Talking about Anode or Cathode ? You wrote A72 but anode 4-9 chamber already empty. Thank you July 8, 2025 at 7:44 AM, QuangPhan : Sorry, Anode July 8, 2025 at 7:45 AM, QuangPhan : I checked it out, it's full. July 8, 2025 at 7:46 AM, Shakir (MCS) : Chamber 4-9 AN empty according to MCS and ACS. Could you provide plate id with port number. Thank you July 8, 2025 at 7:49 AM, Shakir (MCS) : There is UR failed, showing Carrier id null, Please modify it and press UR again. Thank you July 8, 2025 at 7:53 AM, QuangPhan : PO1: MLA1192 P02: MLA1211 PO3: MLA1144 PO4:MLA2042 Thank you. July 8, 2025 at 8:14 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 207 Post-Stock ➤ Stacking AN: 164, CA: 14 VD AN (Process Breakdown) UR: 08,Drying: 96,LR: 04, Wait:80 ,OOS: 12 VD CA (Process Breakdown) UR: 00,Drying: 72,LR: 04, Wait:00, OOS:28 Thank you July 8, 2025 at 9:04 AM, 이도형 (Lee) : @FA 음극 전창고 공매거진 부족으로 로봇에서 풀매거진 회수 늦어지고 있습니다. 확인하시고 로봇에 오븐 플레이트 투입 문의 드립니다. July 8, 2025 at 9:06 AM, 박강민 : Ca VD 4-4 AGV STOP July 8, 2025 at 9:08 AM, Jun(정우준)_SKOH FA : 로봇에 오븐 플레이트 투입은 수동 데이터 수정이 필요하여, 최대한 지양하려고 합니다. 전 창고에 공매거진이 없어서, 풀매거진 회수가 늦어지는 상황은, 공매거진 확보시 정상으로 해소될 상황입니다. July 8, 2025 at 9:47 AM, 김동섭 : Ca VD 4-4 AGV#2 STOP July 8, 2025 at 9:58 AM, 박강민 : CA VD 6-7 P01, P02, P03, P04 AGV로 빼주시길 부탁드립니다. 플레이트 감지 센서 수리가 필요합니다. July 8, 2025 at 10:04 AM, 김동섭 : CA VD 3-1 P3 플레이트 ID MLC6244 안나타나며 MES 확인 해주세요 July 8, 2025 at 10:05 AM, 김동섭 : MES ERROR 메세지 뜸 July 8, 2025 at 10:06 AM, MCS/RTD System : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 01,CA: 198 Post-Stock ➤ Stacking AN: 172, CA: 00 VD AN (Process Breakdown) UR: 16,Drying: 68,LR: 12, Wait:76 ,OOS: 12 VD CA (Process Breakdown) UR: 00,Drying: 64,LR: 16, Wait:00, OOS:28 Thank you July 8, 2025 at 10:10 AM, 김동섭 : CA VD 3-1 P3 Plate Please check if there is no ID July 8, 2025 at 10:12 AM, 김동섭 : Hand barcode is MLC6244 MES alarm message appears July 8, 2025 at 10:13 AM, Chinges Fa : MCS please check NC Anode AGV#05 idle July 8, 2025 at 10:13 AM, Shakir (MCS) : Checking July 8, 2025 at 10:18 AM, Shakir (MCS) : Issue has been resolved ✅ AGV05 started to move Thank you July 8, 2025 at 10:18 AM, Chinges Fa : Thank you very much July 8, 2025 at 10:18 AM, 김동섭 : Please check CA VD 3-1 P3 July 8, 2025 at 10:21 AM, 김동섭 : There are plates and magazines. But the equipment is waiting because there is no plate ID help July 8, 2025 at 10:30 AM, 이도형 (Lee) : @FA Ca VD 2-4 Please put it in the back warehouse July 8, 2025 at 10:37 AM, 이도형 (Lee) : @FA PM님 Ca 3-1 매거진 투입됐는데 1개 플레이트만 바코드 미인식 확인 부탁드립니다. July 8, 2025 at 10:40 AM, 이도형 (Lee) : AGV로 재안착 부탁드립니다. July 8, 2025 at 10:41 AM, 김동섭 : 재안착 문제 아닙니다. July 8, 2025 at 10:42 AM, 김동섭 : CA VD 3-1 P3 플레이트 ID 없습니다 July 8, 2025 at 10:42 AM, 이도형 (Lee) : @Jun(정우준)_SKOH FA 확인부탁드립니다. July 8, 2025 at 10:45 AM, 정다은 : @Jun(정우준)_SKOH FA 전창고 수량(198 plate) 에 비해 현재 돌고 있는 VD 챔버 수가 적은 거 같은데 (92 plate / 23 chamber) 자동화 쪽 이슈 있나요? July 8, 2025 at 10:46 AM, Jun(정우준)_SKOH FA : 혹시 어디 극성 말씀하시는 걸까요?? July 8, 2025 at 10:47 AM, Jun(정우준)_SKOH FA : @Baek Hojong(백호종)FA 피엠님, 해당건 확인 부탁드립니다. 감사합니다. July 8, 2025 at 10:49 AM, KIM SEYEON [김세연]_FA : @정다은 피엠님 양음극 AGV는 총 10대이고, VD룸에 맞는 물동량이 있습니다. 현재 Max 70~80plate정도 한시간에 반송 가능한데, 198plate가 전부 한시간에 VD로 반송은 안될거에요. AGV 및 시스템에 문제가 없는지만 확인해 보겠습니다. 감사합니다. July 8, 2025 at 10:50 AM, Hữu Thắng : @MCS Can you please transfer these magazine in VD CA 6/7 to KC72 . Thank you July 8, 2025 at 10:54 AM, 김완중 : 양극 기준 40개 넘는 챔버가 차 있는데, UR 진행이 제대로 되고 있는지 확인이 필요해 보입니다. @Atom Yang(MCS/RTD) 양극 VD UR 현황 체크 가능하실까요? July 8, 2025 at 10:59 AM, Shakir (MCS) : Transfer initiated and AGV assigned ✅ Thank you July 8, 2025 at 11:07 AM, Jun(정우준)_SKOH FA : MES 로그확인시, MLC6244플레이트 아이디, 매거진 아이디를 정상적으로 설비로 내려줬는데, 설비에서 왜 못받았는지 확인 부탁드립니다. July 8, 2025 at 11:20 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 ,CA: 00 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 190 Post-Stock ➤ Stacking AN: 188, CA: 07 VD AN (Process Breakdown) UR: 00,Drying: 72,LR: 00, Wait:124 ,OOS: 12 VD CA (Process Breakdown) UR: 00,Drying: 104,LR: 00, Wait:00, OOS:20 Thank you July 8, 2025 at 12:39 PM, Shakir (MCS) : This message was deleted. July 8, 2025 at 12:39 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 05 ,CA: 00 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 179 Post-Stock ➤ Stacking AN: 210, CA: 20 VD AN (Process Breakdown) UR: 00,Drying: 60,LR: 00, Wait:140 ,OOS: 12 VD CA (Process Breakdown) UR: 00,Drying: 104,LR: 08, Wait:00, OOS:28 Thank you July 8, 2025 at 1:01 PM, Shakir (MCS) : @FA Please check C1CNV071(13036) there is STP-02 Down error. Thank you July 8, 2025 at 1:02 PM, Győri József F.A : Done July 8, 2025 at 1:41 PM, Kateryna SSL C : Hello! Could you please update? Thank you! July 8, 2025 at 1:42 PM, Shakir (MCS) : Checking July 8, 2025 at 1:48 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 11 ,CA: 00 Pre-Stk ➤ Notching AN: 01 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 155 Post-Stock ➤ Stacking AN: 205, CA: 38 VD AN (Process Breakdown) UR: 00,Drying: 40,LR: 00, Wait:148 ,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 120,LR: 02, Wait:00, OOS:24 Thank you July 8, 2025 at 1:54 PM, Hữu Thắng : @Fa agv#3 stopped on Line 6/7 . Plz check it . thank you July 8, 2025 at 2:05 PM, 김동섭 : CA VD 1-5 AGV STOP July 8, 2025 at 2:16 PM, 김동섭 : AGV@ Please help me CA VD1-5 AGV STOP July 8, 2025 at 2:36 PM, Yon Ko/연커/ : @MCS VD CA AGV#10, AGV#04 idle with material check it thank you. July 8, 2025 at 2:39 PM, Shakir (MCS) : Checking July 8, 2025 at 2:40 PM, Shakir (MCS) : Moving ✅ July 8, 2025 at 2:51 PM, 김동섭 : CA VD 2-4 plate is not properly installed. Please re-install it using AGV. July 8, 2025 at 2:58 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 12 ,CA: 06 Pre-Stk ➤ Notching AN: 11 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 154 Post-Stock ➤ Stacking AN: 203, CA: 26 VD AN (Process Breakdown) UR: 00,Drying: 20,LR: 08, Wait:148 ,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 132,LR: 00, Wait:00, OOS:24 Thank you July 8, 2025 at 3:05 PM, 이도형 (Lee) : This message was deleted. July 8, 2025 at 3:05 PM, 이도형 (Lee) : @FA Nc An agv full magazine check please 2-2, 3-2,5-1 July 8, 2025 at 3:39 PM, QuangPhan : Hello! @ MCS VD AN 6-2 and 4-9 UR half chamber. Please check . Thanks July 8, 2025 at 3:39 PM, Shakir (MCS) : Checking July 8, 2025 at 3:42 PM, Shakir (MCS) : UR failed, Carrier id null for both chamber. Thanks July 8, 2025 at 4:38 PM, QuangPhan : Hello! @FA NC AN 3/1 AGV #9 error. Thanks July 8, 2025 at 4:41 PM, 김동섭 : MCS@ AGV #8,#10 잡 삭제 부탁드립니다 July 8, 2025 at 4:41 PM, Shakir (MCS) : Working on it July 8, 2025 at 4:42 PM, Shakir (MCS) : Ca or An July 8, 2025 at 4:42 PM, 김동섭 : CA July 8, 2025 at 4:42 PM, Shakir (MCS) : On it July 8, 2025 at 4:43 PM, Shakir (MCS) : VD? July 8, 2025 at 4:43 PM, 김동섭 : 네 July 8, 2025 at 4:44 PM, 김동섭 : VD July 8, 2025 at 4:45 PM, Shakir (MCS) : Job cancelled successfully Thank you July 8, 2025 at 4:45 PM, 김동섭 : thank you so much July 8, 2025 at 5:00 PM, Yon Ko/연커/ : @MCS VD AN Please return the material in chamber 6-2 to the STK. thank u! July 8, 2025 at 5:00 PM, Shakir (MCS) : Checking July 8, 2025 at 5:04 PM, Yon Ko/연커/ : @MCS VD AN chambers 4-9 is full of material, but they appear as empty on the ACS. It seems the chambers did not read the LOT and carrier ID. Check it please thank you! July 8, 2025 at 5:11 PM, Shakir (MCS) : Yes, I already told that there is carrier id read problem. Showing carrier id null. July 8, 2025 at 5:13 PM, Shakir (MCS) : On the to STK July 8, 2025 at 5:14 PM, 김동섭 : AGV@ CA VD 2-8 P1,P2 AGV#7 4번 반복하고 있습니다. July 8, 2025 at 5:17 PM, Lajos Tihor : Can You update please? July 8, 2025 at 5:17 PM, Shakir (MCS) : @Jun(정우준)_SKOH FA 4-9 AN Chamber is full but ACS showing empty and many time UR failed with Carrier id null. There is carrier id read fail or chamber sensor problem. Kindly check the issue. Thank you July 8, 2025 at 5:17 PM, Shakir (MCS) : Checking July 8, 2025 at 5:17 PM, Jun(정우준)_SKOH FA : @Baek Hojong(백호종)FA 피엠님, 현장 확인부탁드립니다~! 감사합니다. July 8, 2025 at 5:21 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 60,CA: 22 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 00,CA: 104 Post-Stock ➤ Stacking AN: 222, CA: 51 VD AN (Process Breakdown) UR: 00,Drying: 64,LR: 00, Wait:140 ,OOS: 08 VD CA (Process Breakdown) UR: 08,Drying: 132,LR: 32, Wait:00, OOS:28 Thank you July 8, 2025 at 5:23 PM, 심재훈 : I heard some agvs are stopped. Who can check this? It's between VD anode and st line 1~3. July 8, 2025 at 5:24 PM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ @Chinges Fa please check July 8, 2025 at 5:27 PM, Yon Ko/연커/ : I’ve checked everything currently, anode side all AGVs have, no errors, and are idling. Thank u. July 8, 2025 at 5:44 PM, 김동섭 : Ca VD ROOM AGV#5 주행이탈로 VD 충돌 발생 July 8, 2025 at 5:44 PM, 김진수 : AGV 랑 설비가 박은 건가요? July 8, 2025 at 5:44 PM, 김동섭 : 네 맞습니다 July 8, 2025 at 5:46 PM, 심재훈 : VD설비 괜찮나요? July 8, 2025 at 5:47 PM, 김동섭 : 네 지금 현재는 괜찬은것 같습니다 July 8, 2025 at 5:53 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (1): Kiss Balázs Holiday (0):- Shift change(1): Novák Károly Elektróda:(2) Oláh András, Szabadi Miklós, Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 8, 2025 at 6:44 PM, 인제(Hwang) : Please check the LR status of Ca VD 4-2. It was stopped for a long time and LR was re-requested July 8, 2025 at 6:45 PM, Mohammad Amir : Good evening, Checking July 8, 2025 at 6:45 PM, Cao thi my linh : Hello! @FA @AGV . VD An 4-6 the plates was wrong position . Please use AGV to fix it . thank you! July 8, 2025 at 6:46 PM, Cao thi my linh : Good evening! @MCS VD AN 4-9. Cannot execute UR command. PO1: MLA1192 P02: MLA1211 PO3: MLA1144 PO4: MLA2042 Please check. Thank you. July 8, 2025 at 6:46 PM, Mohammad Amir : Now, AGV#9 and AGV#2 will come with materials to VD CA 4-2 ✅. Thank you very much! July 8, 2025 at 6:47 PM, Mohammad Amir : Good evening, Sure, checking. Thank you very much! July 8, 2025 at 6:47 PM, 인제(Hwang) : Thank you! July 8, 2025 at 6:48 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 6:49 PM, Zaya/ivancsa FA : VD AN 4-6 right? This Chamber is closed July 8, 2025 at 6:51 PM, Cao thi my linh : yes it has been fixed thank you July 8, 2025 at 6:52 PM, Mohammad Amir : Good evening, It is not able to unload because Carrier id is reported as Null and it is causing UR to fail. This issue exists since morning. Please adjust it and upload UR again. Thank you very much! July 8, 2025 at 6:54 PM, 김지수PM(Gyuri)_FA : @Zulaa/졸라/Ivancsa FA Could you please check whether carriers are located in AN VD 4-9 now? July 8, 2025 at 7:07 PM, 김지수PM(Gyuri)_FA : @Usukhuu /ivancsa FA July 8, 2025 at 7:12 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 5 plates out from the c1cnv072_m04. Thanks July 8, 2025 at 7:27 PM, Usukhuu /ivancsa FA : there isn't any AGV located at AN VD 4-9 July 8, 2025 at 7:28 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 36,CA: 24 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 78 Post-Stock ➤ Stacking AN: 211, CA: 27 VD AN (Process Breakdown) UR: 04,Drying: 64,LR: 00, Wait:140 ,OOS: 08 VD CA (Process Breakdown) UR: 04,Drying: 124,LR: 08, Wait:00, OOS:24 Thank you very much! July 8, 2025 at 7:28 PM, 김지수PM(Gyuri)_FA : What about carriers? July 8, 2025 at 7:31 PM, Usukhuu /ivancsa FA : AN VD 4-9 is fully plated, but i don't see anything beside it July 8, 2025 at 7:33 PM, Usukhuu /ivancsa FA : also, the chamber is not recognized plates ID's July 8, 2025 at 7:34 PM, 김지수PM(Gyuri)_FA : Thanks! July 8, 2025 at 8:23 PM, 김지수PM(Gyuri)_FA : @인제(Hwang) 인제님, 혹시 양극 4-5 VD챔버 가동 가능할까요? 풀로 채워지고(12:01am) 아직까지 건조 진행이 안된거같아서요 July 8, 2025 at 8:24 PM, 인제(Hwang) : 확인해보겠습니다 July 8, 2025 at 8:25 PM, 김지수PM(Gyuri)_FA : 감사합니다. July 8, 2025 at 8:27 PM, 인제(Hwang) : 바코드 리딩 정상, 도어 닫힘상태에서 왜 비가동상태였는지는 사유는 파악이 안됩니다. 현재 정상가동 진행했습니다 July 8, 2025 at 8:28 PM, 김지수PM(Gyuri)_FA : 네, 감사합니다! July 8, 2025 at 8:33 PM, Nguyen Huy : @Mohammad Amir hello Amir, i have a question If i set the VD chamber to Manual-AGV mode, will the AGV send the materials without triggering the chamber to start? Because now we need the sample before VD as well, thank you July 8, 2025 at 8:35 PM, Mohammad Amir : Hello, Yes ,if you mean you can transfer materials located inside the VD chamber manually by AGV even when the chamber is in Manual mode,yes you can do that. Feel free to ask me again if you need more clarification. Thank you very much! July 8, 2025 at 8:36 PM, Nguyen Huy : Thank you very much for your answer!! July 8, 2025 at 8:36 PM, Mohammad Amir : You are most welcome! July 8, 2025 at 8:48 PM, 전 운 (Jeon Woon) : Please rechecking July 8, 2025 at 8:49 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 44,CA: 34 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 35 Post-Stock ➤ Stacking AN: 233, CA: 61 VD AN (Process Breakdown) UR: 00,Drying: 44,LR: 00, Wait:168 ,OOS: 08 VD CA (Process Breakdown) UR: 08,Drying: 128,LR: 12, Wait:04, OOS:24 Thank you very much! July 8, 2025 at 9:10 PM, 김현태 : NC AN AGV #6 error Thanks July 8, 2025 at 9:20 PM, Zulaa/졸라/Ivancsa FA : @MCS please check. NC CA agv# 03, 07 idle. Thank you. July 8, 2025 at 9:21 PM, Mohammad Amir : Hello, Sure, checking! July 8, 2025 at 9:25 PM, Mohammad Amir : Issue has been resolved successfully ✅ Now AGV#3 and AGV#7 has started to move. Thank you very much! July 8, 2025 at 9:48 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 58,CA: 55 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 10 Post-Stock ➤ Stacking AN: 212, CA: 76 VD AN (Process Breakdown) UR: 00,Drying: 52,LR: 04, Wait:156 ,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 152,LR: 12, Wait:00, OOS:28 Thank you very much! July 8, 2025 at 10:29 PM, Mohammad Amir : @FA Please check STKC51_C02 there is Fork#1 Load position error when active. Thank you very much! July 8, 2025 at 10:45 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it,it will increase stacking materials delivery speed. Thank you ! July 8, 2025 at 10:48 PM, Mohammad Amir : @FA Please check C1STKA72 _P12 there is Data mismatch error and because of this job of VD AN AGV #9 is getting delayed. Thank you very much! July 8, 2025 at 11:04 PM, Mohammad Amir : This message was deleted. July 8, 2025 at 11:04 PM, Mohammad Amir : @FA Please check is there any maintenance on C1CNV072(from16-126) ,it is OOS and because of this Stacking materials delivery has stopped. Thank you very much! July 8, 2025 at 11:06 PM, 김지수PM(Gyuri)_FA : @fa Please check the robot#1(anode) > not moving Thanks July 8, 2025 at 11:09 PM, 최명운(CHOI MYOUNGWOON) : 해결됐어요 July 8, 2025 at 11:11 PM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+3 carriers from it,it will increase stacking materials delivery speed. Thank you ! July 8, 2025 at 11:12 PM, Mohammad Amir : @FA Please check STKA72_C01/C02 there is Light curtain error and it is blocking AN stacking materials delivery. Thank you very much! July 8, 2025 at 11:13 PM, 김지수PM(Gyuri)_FA : @FA Please check e0cnvc52 > not moving without alarm July 8, 2025 at 11:13 PM, 김지수PM(Gyuri)_FA : RTV July 8, 2025 at 11:42 PM, Mohammad Amir : @FA Please check C1CNV072_P37 it is in Manual mode hence OOS and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 8, 2025 at 11:49 PM, 김지수PM(Gyuri)_FA : Amir,could you please share the next lot? July 8, 2025 at 11:50 PM, Mohammad Amir : Sure , checking! July 8, 2025 at 11:52 PM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA , GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 80,CA: 84 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 05 Post-Stock ➤ Stacking AN: 174, CA: 80 VD AN (Process Breakdown) UR: 00,Drying: 72,LR: 12, Wait:120,OOS: 08 VD CA (Process Breakdown) UR: 12,Drying: 144,LR: 00, Wait:00, OOS:24 Thank you very much! July 8, 2025 at 11:53 PM, Nguyen Huy : @FA AGV #8 error near NC CA 5/1, pls check July 9, 2025 at 12:16 AM July 9, 2025 at 12:16 AM, Mohammad Amir : @FA Please check C1STKA72_C02 there is Fork FLS error and it is blocking AN stacking materials delivery. Thank you very much! July 9, 2025 at 12:17 AM, Mohammad Amir : @FA Please check is there any maintenance on C1CNV072(from16-126) ,it is OOS and because of this Stacking materials delivery has stopped. Thank you very much! July 9, 2025 at 12:17 AM, 김지수PM(Gyuri)_FA : Now there is problem with 16176track July 9, 2025 at 12:18 AM, Mohammad Amir : Thank you very much for the confirmation! July 9, 2025 at 12:27 AM, Mohammad Amir : @FA Maintenance still going on STKA72 , please check? Cause now there are shortages of AN stacking materials for Stacking Line 1&2&3, production is getting affected. Thank you very much! July 9, 2025 at 12:29 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please check the reason why the empty reel tray lost the destination from 6200track to6206trak (e0cnva53) July 9, 2025 at 12:31 AM, 김지수PM(Gyuri)_FA : Some empty reel tray was staying in thay port more than 2hours so full reels couldn't move to 6200 July 9, 2025 at 12:34 AM, Mohammad Amir : This message was deleted. July 9, 2025 at 12:36 AM, Mohammad Amir : Hello, Could you please tell me carrier id so that I can analyze what is the issue. As now I checked everything is normal and empty reel tray is getting recovered normally and Reels delivery is also normalized for Anode side. Thank you very much! July 9, 2025 at 12:52 AM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA As I checked, LTA1233 reached at M02(6200) but after there was no Rackin from 6200 that's why this empty trays was not moving and it was blocking the full reels way. This was the core issue of delay. However at 00:26 as manual job was created and issue was solved and process was normalized ✅. Thank you very much! July 9, 2025 at 12:52 AM, 김지수PM(Gyuri)_FA : Thanks for checking! July 9, 2025 at 12:53 AM, Mohammad Amir : You are most welcome! July 9, 2025 at 12:54 AM, 인제(Hwang) : NC Ca Robot#2 Error July 9, 2025 at 12:57 AM, Mohammad Amir : @FA Please check C1STKA72_C02 there is SCP Main Power CP Trip and it is blocking AN stacking materials delivery. Thank you very much! July 9, 2025 at 12:59 AM, Nguyen Huy : @FA Robot #2 NC CA MCS data report incomplete error, pls check July 9, 2025 at 1:06 AM, Mohammad Amir : @FA Maintenance still going on STKA72 , please check? Cause now there are shortages of AN stacking materials for Stacking Line 1&2&3, production is getting affected. Thank you very much! July 9, 2025 at 1:07 AM, Zaya/ivancsa FA : hungarian technicians are working on it July 9, 2025 at 1:08 AM, Mohammad Amir : Thank you very much for the confirmation! July 9, 2025 at 1:22 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please increase the priority of c1stka72 p01 03 05 for a while July 9, 2025 at 1:22 AM, Mohammad Amir : Sure, working on it. July 9, 2025 at 1:27 AM, 김지수PM(Gyuri)_FA : I don't know if it actually applies to raising the port priority in RTD. It's still 50 on SCS July 9, 2025 at 1:28 AM, 김지수PM(Gyuri)_FA : Now I'm doing manually in scs July 9, 2025 at 1:30 AM, Mohammad Amir : I am increasing from MCS side,for RTD we can set priority to certain value and future all jobs creation will follow such value,however i am not authorized to use this function unfortunately. If Increased priority is not reflecting on SCS side ,then in this case it will be better to increase from the SCS side. Thank you very much! July 9, 2025 at 1:41 AM, Mohammad Amir : @FA Please check again ,is there any maintenance on C1CNV072(from16-126) ,it is OOS and because of this Stacking materials delivery has stopped. Thank you very much! July 9, 2025 at 1:50 AM, 김지수PM(Gyuri)_FA : @fa There was no destination for MLC4210. I assigned to 16044 again July 9, 2025 at 1:50 AM, Tetiana SL/D : @Fa check please supply of Anode and Cathode material on 2 and 3 lines. Thanks! AGV don't bring the material July 9, 2025 at 1:50 AM, Mohammad Amir : There was issue with the C1CNV072 that's why you are witnessing delay. Now issue has been resolved and carriers on the way to Line-2&3. Thank you very much! July 9, 2025 at 1:55 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it,it will increase stacking materials delivery speed,there is shortages of Anode materials so please take action on it on priority. Thank you ! July 9, 2025 at 2:23 AM, Mohammad Amir : Dear @All , GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 110,CA: 96 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 09 Post-Stock ➤ Stacking AN: 170, CA: 81 VD AN (Process Breakdown) UR: 04,Drying: 96,LR: 08, Wait:104,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 124,LR: 00, Wait:00, OOS:28 Thank you very much! July 9, 2025 at 2:24 AM, Mohammad Amir : @FA Please check C1STKC72_C02 there is Load Oversize error and it is blocking CA stacking materials delivery. Check the issue on priority. Thank you very much! July 9, 2025 at 2:38 AM, 김지수PM(Gyuri)_FA : @Zsurbej Zsolt F.A. please check it thanks July 9, 2025 at 2:48 AM, Mohammad Amir : @FA Please check,Is someone taking action? Issue still exists,there is shortages of CA stacking materials. Thank you very much! July 9, 2025 at 2:50 AM, 최명운(CHOI MYOUNGWOON) : Technician action is underway. July 9, 2025 at 2:50 AM, Mohammad Amir : Thank you very much for the confirmation! July 9, 2025 at 2:51 AM, 김지수PM(Gyuri)_FA : @manufacturing Please take 3plates out from the c1cnv072 m04 July 9, 2025 at 2:52 AM, Mohammad Amir : @KollerCsaba 처버 Чобо Please check this issue still exists. Thank you ! July 9, 2025 at 2:52 AM, 김지수PM(Gyuri)_FA : And please take out the carrier without light curtain detection > now in m03 July 9, 2025 at 2:54 AM, N.Zoli F.A. : Solved July 9, 2025 at 2:54 AM, Mohammad Amir : Thank you very much! July 9, 2025 at 2:58 AM, KollerCsaba 처버 Чобо : Sorry I'm first floor @Lika @Mezhenskiy @Yulya Kirsanova July 9, 2025 at 2:59 AM, Mohammad Amir : This message was deleted. July 9, 2025 at 2:59 AM, Mohammad Amir : @Lika Please check C1CNV072_M04 and remove 1+2 carriers from it,it will increase stacking materials delivery speed,there is shortages of Anode materials so please take action on it on priority. Thank you ! July 9, 2025 at 3:00 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please send MLC0112 back to C72? > now still traveling on the CNV more than 15hours July 9, 2025 at 3:00 AM, Mohammad Amir : Sure, checking! July 9, 2025 at 3:04 AM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA It already had a destination to go to CNV072_P32. But because of one issue it was not reaching P32. Now,Issue has been resolved ✅ Now MLC0112 will go to it's destination P32. I am monitoring. Thank you very much! July 9, 2025 at 3:05 AM, 김지수PM(Gyuri)_FA : Thanks! July 9, 2025 at 3:05 AM, Mohammad Amir : You are welcome! July 9, 2025 at 3:07 AM, 김지수PM(Gyuri)_FA : @fa Please check LTA0625 (E0CNVA51 6034track) thanks July 9, 2025 at 3:09 AM, 인제(Hwang) : NC An Robot#1 Error July 9, 2025 at 3:11 AM, 김지수PM(Gyuri)_FA : @Zsurbej Zsolt F.A. @N.Zoli F.A. July 9, 2025 at 3:23 AM, N.Zoli F.A. : @Szabolcs July 9, 2025 at 3:23 AM, Mohammad Amir : This issue has already been solved. ✅ Thank you very much! July 9, 2025 at 3:23 AM, 김지수PM(Gyuri)_FA : Sorry, I forgot here is for assembly July 9, 2025 at 3:25 AM, 김지수PM(Gyuri)_FA : @fa Pleased check c1cnv072 16085 track July 9, 2025 at 3:25 AM, 김지수PM(Gyuri)_FA : @Zaya/ivancsa FA July 9, 2025 at 3:39 AM, Mohammad Amir : @FA Please check this issue still exists and it is blocking stacking materials delivery. Thank you very much! July 9, 2025 at 3:53 AM, 인제(Hwang) : NC Ca Robot#3 Error July 9, 2025 at 4:01 AM, Mohammad Amir : Dear @All , GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 125,CA: 96 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 03,CA: 00 Post-Stock ➤ Stacking AN: 174, CA: 99 VD AN (Process Breakdown) UR: 04,Drying: 100,LR: 08, Wait:100,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 104,LR: 04, Wait:20, OOS:32 Thank you very much! July 9, 2025 at 4:32 AM, Mohammad Amir : @FA Please check C1CNV071_13_019/018-Cathode side ,there is Run time Over error and it is blocking materials recovery. Thank you very much! July 9, 2025 at 4:57 AM, Mohammad Amir : @FA Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 9, 2025 at 5:19 AM, Mohammad Amir : Dear @All , GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 149,CA: 102 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 01,CA: 01 Post-Stock ➤ Stacking AN: 187, CA: 89 VD AN (Process Breakdown) UR: 00,Drying: 100,LR: 04, Wait:104,OOS: 08 VD CA (Process Breakdown) UR: 40,Drying: 76,LR: 20, Wait:12, OOS:32 Thank you very much! July 9, 2025 at 6:21 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.09. 8+1/12+1 Tech, 0Sl, 1Sup. Overtime(0): Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(1): Pintye Miklós Shift Change(0): --------------- Electrode(3): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, --------------- Assy GF (2): Kovács Ágnes, CsanálosiGábor, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Takács Ádám --------------- Form/Modul(1): Gerbovits Ke July 9, 2025 at 6:37 AM, Shakir (MCS) : Good morning @All GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 131,CA: 93 Pre-Stk ➤ Notching AN: 00 ,CA:00 Pre-Stk ➤ VD AN: 02,CA: 00 Post-Stock ➤ Stacking AN: 157, CA: 123 VD AN (Process Breakdown) UR: 04,Drying: 100,LR: 04, Wait:96,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 80,LR: 20, Wait:32, OOS:32 Thank you July 9, 2025 at 7:10 AM, Ngoc zia : Nc Ca #robot 2 erorr July 9, 2025 at 7:11 AM, Shakir (MCS) : @FA Please check E0CNVC52 09-041 there is Data Mismatch error. Thank you July 9, 2025 at 7:20 AM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) good morning VD CA 3-4 3-9 4-3 4-7 chambers have only one material. Please check. Thank you! July 9, 2025 at 7:20 AM, Shakir (MCS) : Checking July 9, 2025 at 7:21 AM, Dariimaa/다리마/Ivancsa : Also, 4-4 4-6 chambers only have 2 carriers. Please check July 9, 2025 at 7:21 AM, Shakir (MCS) : Working on it July 9, 2025 at 7:27 AM, Shakir (MCS) : 4-7 : UR failed for port 3: Carrier id read failed. 3-9: UR failed for port 2: Carrier id read failed. 3-4: UR failed for port 4: Carrier id read failed. 4-3: UR failed for port 2: Carrier id read failed. Thank you July 9, 2025 at 7:31 AM, Shakir (MCS) : 4-4: UR failed for port 1&2: Carrier id read failed. 4-6: UR failed for port 3&4: Carrier id read failed. Thank you July 9, 2025 at 8:13 AM, Shakir (MCS) : @FA Please check E0STKC52_C01 there is Load Oversize error. Thank you July 9, 2025 at 8:13 AM, Csanálosi Gábor FA : Yup, already omw July 9, 2025 at 8:15 AM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) NC CA AGV#01 and #04 idle. Please check Thank you! July 9, 2025 at 8:15 AM, Shakir (MCS) : Checking July 9, 2025 at 8:20 AM, Shakir (MCS) : Issue has been resolved ✅ AGV#1and AGV#4 has started to move. Thank you July 9, 2025 at 8:22 AM, Csanálosi Gábor FA : Done July 9, 2025 at 8:28 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate MLC6235 (C1STKA72, 0105303) July 9, 2025 at 8:33 AM, Csanálosi Gábor FA : I sent to manual port to check July 9, 2025 at 8:34 AM, Shakir (MCS) : @FA NC Ca RTV is stopped. Run time error, Please check. Thank you July 9, 2025 at 8:34 AM, Csanálosi Gábor FA : Omw July 9, 2025 at 8:36 AM, Shakir (MCS) : @FA Please check C1STKC72_C01 there is MCP AP error. Thank you July 9, 2025 at 8:41 AM, Csanálosi Gábor FA : Done July 9, 2025 at 8:42 AM, Csanálosi Gábor FA : Checking July 9, 2025 at 8:45 AM, jung soonhak정순학 invited Jang WonBum/장원범/AGV. July 9, 2025 at 8:55 AM, Csanálosi Gábor FA : Done July 9, 2025 at 8:56 AM, Shakir (MCS) : @Manufacturing Please check and remove 1+3 carriers from M01_C1CNV072 Thank you! July 9, 2025 at 9:03 AM, 김동섭 : CA VD 3-4 P4 , CA VD 3-9 P2 , CA VD 4-3 P2 , CA VD 4-4 P1,P2 공정완료 됐으나 캐리어 안착불량으로 인식되어 AGV 안가지고 가고 챔버에 남아 있음 July 9, 2025 at 9:04 AM, Csanálosi Gábor FA : It was MLA6235. We took out but as we tried to send back, mcs buzzer occured. So it is under investigation. By @이민재 July 9, 2025 at 9:06 AM, Sazzad Bhai SKon : This is stacking material. So the plate should be in putted from post VD STK manual port. July 9, 2025 at 9:07 AM, 이민재 : According to the check, a plate with the same number as MLA6235 is on VD3-7. July 9, 2025 at 9:08 AM, Sazzad Bhai SKon : In that case MES needs generrate a carrier name, and paste it there July 9, 2025 at 9:08 AM, 이민재 : After VD drying is finished, you must check the barcode at Notching before inserting it. July 9, 2025 at 9:09 AM, 이민재 : I will share this information with Notching. July 9, 2025 at 9:12 AM, 방혁 PM(Bang.Hyuk) FA : CA VD 3-4 P4 , CA VD 3-9 P2 , CA VD 4-3 P2 , CA VD 4-4 P1,P Please check UR STATUS @MCS July 9, 2025 at 9:13 AM, Shakir (MCS) : Checking July 9, 2025 at 9:14 AM, 김동섭 : Ca VD 4-6 P3 , P4 동일 입니다 July 9, 2025 at 9:16 AM, 이한웅(삼구) : @Debreczeni Ármin @Lan Nhi Please check! July 9, 2025 at 9:16 AM, Shakir (MCS) : 4-7 : UR failed for port 3: Carrier id read failed. 3-9: UR failed for port 2: Carrier id read failed. 3-4: UR failed for port 4: Carrier id read failed. 4-3: UR failed for port 2: Carrier id read failed. 4-4: UR failed for port 1&2: Carrier id read failed. 4-6: UR failed for port 3&4: Carrier id read failed. Thank you July 9, 2025 at 9:17 AM, 이민재 : I'll send all of these to the warehouse. July 9, 2025 at 9:18 AM, Shakir (MCS) : This message was deleted. July 9, 2025 at 9:25 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 94,CA: 72 Pre-Stk ➤ Notching AN: 03 ,CA:01 Pre-Stk ➤ VD AN: 03,CA: 03 Post-Stock ➤ Stacking AN: 147, CA: 78 VD AN (Process Breakdown) UR: 04,Drying: 96,LR: 12, Wait:100,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 112,LR: 12, Wait:12, OOS:24 Thank you July 9, 2025 at 9:25 AM, 이한웅(삼구) : Please check if the actual barcode is duplicated. If it is indeed a duplicate, replace it with an unused barcode ID and share the updated information here July 9, 2025 at 9:25 AM, Lan Nhi : Yes sir July 9, 2025 at 9:29 AM, Csanálosi Gábor FA : @Shakir (MCS) C0PVA020 is oos for investigation, I let you know when its back. July 9, 2025 at 9:30 AM, Shakir (MCS) : Thank you for your information ✅ July 9, 2025 at 9:37 AM, Lan Nhi : Dear MR Lee. Example 3-7 MLA6235 on mes and actual pallets code on machine match each other. In Process 06:52-10:52 July 9, 2025 at 9:40 AM, Csanálosi Gábor FA : COPVA020 is online again, and COPVC020 is OOS for investigation July 9, 2025 at 9:44 AM, 이한웅(삼구) : Please check visually once the drying is complete July 9, 2025 at 9:45 AM, Lan Nhi : Yes sir July 9, 2025 at 9:57 AM, Csanálosi Gábor FA : C0PVC020 is back online July 9, 2025 at 10:08 AM, Ngoc zia : Nc ca 3-2 agv7 error July 9, 2025 at 10:09 AM, Csanálosi Gábor FA : COPVA030 is oos for investigation July 9, 2025 at 10:22 AM, 이한웅(삼구) : Please delete the job CA VD 4-7 (#34) @Shakir (MCS) July 9, 2025 at 10:23 AM, Shakir (MCS) : Working on it July 9, 2025 at 10:25 AM, Shakir (MCS) : Job cancelled successfully, Thanks July 9, 2025 at 10:26 AM, 이한웅(삼구) : thank you! July 9, 2025 at 10:42 AM, Shakir (MCS) : @FA Please check C1STKA71_C02 there is Ready off during Forking error. Thank you July 9, 2025 at 10:45 AM, Csanálosi Gábor FA : On it July 9, 2025 at 11:02 AM, Lan Nhi : Dear MR Lee. For example, 3-7 goods are dry, I visually checked and there is MLA6235. The op has sent the sample to QC and is waiting for the result from QC. July 9, 2025 at 11:03 AM, Sazzad Bhai SKon : Magazines are okay. Only plate id needs to be changed, because it is duplicated July 9, 2025 at 11:04 AM, Lan Nhi : Yes, I get it July 9, 2025 at 11:04 AM, 이한웅(삼구) : Please change the duplicate barcode ID that is currently stored separately in the VD July 9, 2025 at 11:05 AM, Lan Nhi : Yes sir July 9, 2025 at 11:21 AM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) VD CA AGV#2 and AGV#9 idle. Please check. Thank you! July 9, 2025 at 11:21 AM, Shakir (MCS) : Checking July 9, 2025 at 11:25 AM, Shakir (MCS) : Issue has been resolved ✅ AGV#2 and AGV#9 CA has started to move. Thank you July 9, 2025 at 11:27 AM, Lan Nhi : Dear MR Lee, Example 3-7 MLA6235 has been replaced with new ID MLA6248. July 9, 2025 at 11:35 AM, 이한웅(삼구) : Chamber Plate ID? July 9, 2025 at 11:56 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 73, CA: 86 Pre-Stk ➤ Notching AN: 25 ,CA:09 Pre-Stk ➤ VD AN: 02,CA: 02 Post-Stock ➤ Stacking AN: 136, CA: 50 VD AN (Process Breakdown) UR: 00,Drying: 108,LR: 04, Wait:96,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 108,LR: 08, Wait:00, OOS:32 Thank you July 9, 2025 at 1:10 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 70, CA: 98 Pre-Stk ➤ Notching AN: 19 ,CA:18 Pre-Stk ➤ VD AN: 02,CA: 03 Post-Stock ➤ Stacking AN: 135, CA: 51 VD AN (Process Breakdown) UR: 12,Drying: 100,LR: 04, Wait:92,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 108,LR: 00, Wait:04, OOS:32 Thank you July 9, 2025 at 1:23 PM, Truong : NC AN agv #9 error please come check @FA July 9, 2025 at 1:24 PM, Dariimaa/다리마/Ivancsa : Solved July 9, 2025 at 1:38 PM, Nauman/Ivancsa FA : NC AN AGV 7 error Need help July 9, 2025 at 2:06 PM, Dariimaa/다리마/Ivancsa : @Shakir (MCS) NC AN AGV#3 please delete the job. Because the port is full. July 9, 2025 at 2:06 PM, Shakir (MCS) : On it July 9, 2025 at 2:07 PM, Nauman/Ivancsa FA : This message was deleted. July 9, 2025 at 2:09 PM, Ngoc zia : @rtd can u help pls. Id “temp” 5 times wrong password when log in. Can u reset pls July 9, 2025 at 2:09 PM, Shakir (MCS) : Job cancelled successfully ✅ Magazine transfer to gantry input port ✅ Thank you July 9, 2025 at 2:09 PM, Shakir (MCS) : Working on it July 9, 2025 at 2:09 PM, Dariimaa/다리마/Ivancsa : Thank you! July 9, 2025 at 2:11 PM, Shakir (MCS) : I have reset the password ✅ Please use 1234 temporary password and set new password. Thank you July 9, 2025 at 2:48 PM, 김희래 : @FA Please check AN Robot#1. It is stopped. Robot operation MGZ Detect sensor error July 9, 2025 at 2:52 PM, Csanálosi Gábor FA : Done July 9, 2025 at 3:07 PM, Diana : Hello, problem with 3 AGV on 3/3 stk, thank you July 9, 2025 at 3:08 PM, Dariimaa/다리마/Ivancsa : already solved July 9, 2025 at 3:09 PM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity July 9, 2025 at 3:09 PM, Shakir (MCS) : Checking July 9, 2025 at 3:15 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 73, CA: 86 Pre-Stk ➤ Notching AN: 18,CA:10 Pre-Stk ➤ VD AN: 01,CA: 02 Post-Stock ➤ Stacking AN: 155, CA: 74 VD AN (Process Breakdown) UR: 04,Drying: 96,LR: 04, Wait:104,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 104,LR: 04, Wait:16, OOS:24 Thank you July 9, 2025 at 3:51 PM, Shakir (MCS) : @FA Please check C1STKC72_C02 there is Load Oversize error. Thank you July 9, 2025 at 3:52 PM, Kovács Ágnes : Going July 9, 2025 at 3:55 PM, Kovács Ágnes : Solved July 9, 2025 at 4:15 PM, Ngoc zia : @fa iVd Ca 3-6 #agv 3 error. 7 other pause July 9, 2025 at 4:15 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 88, CA:99 Pre-Stk ➤ Notching AN: 20,CA:08 Pre-Stk ➤ VD AN: 03,CA: 02 Post-Stock ➤ Stacking AN: 152, CA: 64 VD AN (Process Breakdown) UR: 04,Drying: 96,LR: 04, Wait:100,OOS: 08 VD CA (Process Breakdown) UR: 16,Drying: 96,LR: 12, Wait:12, OOS:24 Thank you July 9, 2025 at 4:16 PM, Dariimaa/다리마/Ivancsa : Already solved July 9, 2025 at 4:46 PM, Lan Nhi : @FA Hello. Please check and remove the dried goods in machine 2-6 VD/AN. Thank you. July 9, 2025 at 5:39 PM, Debreczeni Ármin : @Shakir (MCS) please share lot quantity July 9, 2025 at 5:44 PM, Shakir (MCS) : Checking July 9, 2025 at 5:50 PM, Mohammad Amir : Good evening Everyone, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 89, CA:113 Pre-Stk ➤ Notching AN: 00,CA:09 Pre-Stk ➤ VD AN: 01,CA: 01 Post-Stock ➤ Stacking AN: 144, CA: 64 VD AN (Process Breakdown) UR: 08,Drying: 96,LR: 12, Wait:88,OOS: 08 VD CA (Process Breakdown) UR: 16,Drying: 112,LR: 08,Wait:24, OOS:20 Thank you very much! July 9, 2025 at 5:50 PM, Mohammad Amir : Good evening @Debreczeni Ármin For your information as well. Thank you very much! July 9, 2025 at 5:55 PM, Nguyên : 2/3 AN GF AGV #1 ERROR Come for me July 9, 2025 at 5:56 PM, Mr.Miti (미티) FA invited Vékony Ferenc. July 9, 2025 at 6:02 PM, Chinges Fa : Done July 9, 2025 at 6:19 PM, Mr.Miti (미티) FA : Good Evening! FA Iváncsa "A" shift (18:00 - 6:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(5): Magyar Imre Sarvajcz Ferenc Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2): Csepi Árpád Édl Tamás ———————————— July 9, 2025 at 6:25 PM, Mohammad Amir : Good evening @Manufacturing, Please check and confirm me is there any physical carrier located at VD AN 2-6-P01 ? Thank you very much! July 9, 2025 at 6:30 PM, 김현태 : NC AN AGV #7 error Thanks July 9, 2025 at 6:30 PM, Mohammad Amir : @Manufacturing, Pease check MLC2204 from C1CNV072_M04 ,for this magazine MC2142 is not closed , this is the issue. Thank you very much! July 9, 2025 at 6:37 PM, Mohammad Amir : Dear @Manufacturing team, For VD CA 4-8,during unloading we received null carrier IDs from P01/P02 that's why for this ports Unloading has been failed. Please let me know should I send it to back warehouse so that this machine can be used in production again. Thank you very much! July 9, 2025 at 6:42 PM, 이한웅(삼구) : Please check @Victory @Nguyên July 9, 2025 at 6:42 PM, 인제(Hwang) : Yes, please send them to the warehouse. And also send the plates of Ca VD 4-9 P01, P02 to the warehouse July 9, 2025 at 6:43 PM, Mohammad Amir : Good evening, Sure , working on it. July 9, 2025 at 6:45 PM, Mohammad Amir : Jobs has been created successfully to transfer these materials to back warehouse ✅. I am monitoring. Thank you very much! July 9, 2025 at 6:46 PM, Mohammad Amir : Dear @인제(Hwang) Could you please check this issue as well and please let me know the information after checking. Thank you very much! July 9, 2025 at 6:51 PM, 인제(Hwang) : There is a plate there. “MLA6092" July 9, 2025 at 6:51 PM, Mohammad Amir : Thank you very much,I am working on it. July 9, 2025 at 6:54 PM, Mohammad Amir : @FA Good evening, Could you please check MLA6092 , according to our database,it is located at C1STKA72(0200105). However according to @인제(Hwang) ,it is also located at VD AN 2-6(P01). It is suspected Duplicated case,I need confirmation. Thank you very much! July 9, 2025 at 6:55 PM, Mohammad Amir : Update :- Now VD CA 4-8 has been completed unloaded successfully ✅. Thank you very much! July 9, 2025 at 6:58 PM, Mohammad Amir : Dear @이주봉PM LEE JUBONG(FA) Good evening Sir, Could you please check this issue. Thank you very much! July 9, 2025 at 7:04 PM, Tuya Ivancsa FA : This message was deleted. July 9, 2025 at 7:04 PM, Tuya Ivancsa FA : Checked MLA6092 , is don’t have at C1STKA72(0200105) July 9, 2025 at 7:05 PM, Mohammad Amir : @Tuya Ivancsa FA Please check MLA0216 located at C1CNV072_16_169 it is not moving and blocking stacking materials delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! July 9, 2025 at 7:05 PM, Mohammad Amir : Thank you very much for confirming! July 9, 2025 at 7:07 PM, 최명운(CHOI MYOUNGWOON) : In fact, there is MLA6092 in VD and MLA6092 in KA72 is being checked. July 9, 2025 at 7:09 PM, Mohammad Amir : So, Sir,you mean MLA6092 exista in both places? It exists in VD AN 2-6 P01 and inside C1STKA72? Thank you very much! July 9, 2025 at 7:10 PM, 최명운(CHOI MYOUNGWOON) : When KA72's MLA6092 is taken out and checked, it is confirmed as MLA6092, so duplication is correct. I'm going to replace the barcode. July 9, 2025 at 7:12 PM, Mohammad Amir : Thank you very much for confirming. Yes Sir, please change the barcode of the carrier MLA6092 located inside the STK and for MLA6092 let the VD be completed for it. Thank you very much for your support. July 9, 2025 at 7:16 PM, Mohammad Amir : Update :- Now VD CA 4-9(P01/P02) has been unloaded successfully ✅. Thank you very much! July 9, 2025 at 7:16 PM, 인제(Hwang) : Thank you so much! July 9, 2025 at 7:17 PM, Mohammad Amir : You are most welcome! Please don’t hesitate to contact me if you need any additional support. July 9, 2025 at 7:22 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 72,CA:90 Pre-Stk ➤ Notching AN: 00,CA:19 Pre-Stk ➤ VD AN: 03,CA: 03 Post-Stock ➤ Stacking AN: 142, CA: 66 VD AN (Process Breakdown) UR: 08,Drying: 112,LR: 04, Wait:72,OOS: 08 VD CA (Process Breakdown) UR: 16,Drying: 108,LR: 08,Wait:24, OOS:20 Thank you very much! July 9, 2025 at 7:26 PM, Mohammad Amir : @FA Please check E0STKA51/52_C02 there is Port interface Error . Thank you very much! July 9, 2025 at 7:31 PM, Mohammad Amir : @Imre Please check this issue. Thank you very much! July 9, 2025 at 7:36 PM, 최명운(CHOI MYOUNGWOON) : MLA6092 of KA72 warehouse was replaced with MLA6249 barcode. July 9, 2025 at 7:37 PM, Mohammad Amir : Sir, Now issue has been resolved ✅. Now both carriers have unique barcode. Thank you very much! July 9, 2025 at 7:39 PM, Mohammad Amir : @FA @Imre Please check C1STKA71_C01 there is Load Oversize error and it blocking empty magazine delivery. Thank you very much! July 9, 2025 at 7:57 PM, Mohammad Amir : @FA Please check LTC1277 located at CA NC RTV01 ,it is not moving and blocking Reels delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! July 9, 2025 at 8:13 PM, Mohammad Amir : @FA Please check C1STKC71_P22 there is Run time Over error and it has blocked the materials recovery. Thank you very much! July 9, 2025 at 8:28 PM, 최명운(CHOI MYOUNGWOON) : We are taking action. July 9, 2025 at 8:29 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 8:34 PM, 최명운(CHOI MYOUNGWOON) : It's solved. July 9, 2025 at 8:34 PM, Mohammad Amir : Materials recovery has started again . ✅ Thank you very much! July 9, 2025 at 8:38 PM, Mohammad Amir : Could you please check C1STKC71_C01 there is Ready off during Forking error and now it has caused materials recovery to be stopped. Thank you very much! July 9, 2025 at 8:48 PM, 최명운(CHOI MYOUNGWOON) : It's solved. July 9, 2025 at 8:50 PM, Mohammad Amir : @FA Please check NC CA Robot #1(8011/8014). Thank you very much! July 9, 2025 at 8:55 PM, 최명운(CHOI MYOUNGWOON) : It's done. July 9, 2025 at 8:55 PM, Mohammad Amir : Thank you very much! July 9, 2025 at 9:20 PM, Mohammad Amir : @FA Please check NC CA Robot (8047) there is Run time Over error and it is slowing down empty magazine delivery. Thank you very much! July 9, 2025 at 9:20 PM, Mohammad Amir : @FA Please also check NC CA RTV01 it is OOS. Thank you very much! July 9, 2025 at 9:21 PM, 김현태 : NC AN Robot #1 error Thanks July 9, 2025 at 9:21 PM, Mohammad Amir : Robot #1(8047)*** July 9, 2025 at 9:41 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 85,CA:100 Pre-Stk ➤ Notching AN: 00,CA:18 Pre-Stk ➤ VD AN: 02,CA: 01 Post-Stock ➤ Stacking AN: 146, CA: 98 VD AN (Process Breakdown) UR: 04,Drying: 120,LR: 04, Wait:76,OOS: 08 VD CA (Process Breakdown) UR: 12,Drying: 88,LR: 28,Wait:44, OOS:20 Thank you very much! July 9, 2025 at 9:50 PM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 9, 2025 at 9:55 PM, 김현태 : NC AN AGV #7 error Thanks July 9, 2025 at 10:07 PM, 최명운(CHOI MYOUNGWOON) : @FA Technician GF Ca ROBOT#1 is out of action July 9, 2025 at 10:11 PM, Anita Mirosnicsenko : Hello! Line 3 STK AGV#1 stopped, please check! Thank you! July 9, 2025 at 10:24 PM, 김정희(Jeong hee FA) : @Mohammad Amir GFA_NC AGV#7 Please delete the job. July 9, 2025 at 10:24 PM, Mohammad Amir : Sure, checking! July 9, 2025 at 10:25 PM, Mohammad Amir : Please confirm,is it Anode or Cathode ? Thank you! July 9, 2025 at 10:26 PM, 김정희(Jeong hee FA) : An' July 9, 2025 at 10:29 PM, Mohammad Amir : As I checked,There is no job exists for AGV#7 NC AN. Please share carrier id so that I can checked deeply. Thank you very much! July 9, 2025 at 10:31 PM, Mohammad Amir : @FA Please check NC AN AGV#7 is in error. Thank you! July 9, 2025 at 11:25 PM, 최명운(CHOI MYOUNGWOON) : @MCS Please delete GF VD Ca 4-8P01,02. Actually, the cargo is on AGV#4 and AGV#4 is charging July 9, 2025 at 11:27 PM, Mohammad Amir : Checking July 9, 2025 at 11:33 PM, Mohammad Amir : Hello Sir, Actually the issue was that the job for AGV#4 was created to O/P ports of Pres VD STK that's why AGV was not able to unload and just roaming around. Now I have resolved the issue and AGV#4 on the way to unload ✅. Thank you very much! July 9, 2025 at 11:36 PM, Mohammad Amir : @FA Please check C1STKC72_C02 there is ready off during the Forking error. Several jobs are pending. Thank you very much! July 9, 2025 at 11:39 PM, 김지수PM(Gyuri)_FA : @fa Please check LTC1072 on E0CNVC52_M09 track > not moving more than 4 hours thanks July 9, 2025 at 11:39 PM, 최명운(CHOI MYOUNGWOON) : ACS still has cargo in VD 4-8 P01,02, can you erase it? July 9, 2025 at 11:41 PM, Mohammad Amir : Sir, You mean physically VD CA 4-8 P01/P02 is empty ? Thank you very much! July 9, 2025 at 11:42 PM, 최명운(CHOI MYOUNGWOON) : Yes. P01,02 seats are empty. July 9, 2025 at 11:44 PM, Mohammad Amir : Sir, From MCS and RTD side now everything is up to dated and all issue resolved ✅. @ACS, Please raise the data for VD CA 4-8 P1/02 as according to @최명운(CHOI MYOUNGWOON) these ports are empty but as I checked in ACS information still exists,it will cause issue in future so please cancel. Thank you very much! July 9, 2025 at 11:47 PM, 김지수PM(Gyuri)_FA : I deleted carrier information on p01 p02 ca vd 4-8 July 9, 2025 at 11:47 PM, Mohammad Amir : Thank you very much ! July 9, 2025 at 11:52 PM, Mohammad Amir : Update: Now AGV#4 VD CA ,has successfully unloaded thecarriers located on it to the warehouse and now it is free to be used in production again✅. Currently the battery level for AGV#4 is 61%. Thank you very much! July 9, 2025 at 11:55 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 84,CA:109 Pre-Stk ➤ Notching AN: 00,CA:10 Pre-Stk ➤ VD AN: 02,CA: 03 Post-Stock ➤ Stacking AN: 174, CA: 111 VD AN (Process Breakdown) UR: 04,Drying: 100,LR: 04, Wait:92,OOS: 08 VD CA (Process Breakdown) UR: 12,Drying: 80,LR: 20,Wait:60, OOS:20 Thank you very much! July 9, 2025 at 11:59 PM, Mohammad Amir : @FA Please check NC CA RTV01 ,it is OOS and reels delivery has stopped. Thank you very much! July 10, 2025 at 12:06 AM July 10, 2025 at 12:06 AM, Nguyên : NC AN GF Robot #1 Error Come for me Thank you July 10, 2025 at 12:06 AM, Mohammad Amir : @FA Please check LTC1072 Empty tray transfer task created from M09_CNVC52, but it is not moving. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! July 10, 2025 at 12:09 AM, Chinges Fa : This message was deleted. July 10, 2025 at 12:13 AM, 김지수PM(Gyuri)_FA : @Imre @Bonnyai Ákos @Sopronyi Gábor Please check it thanks July 10, 2025 at 12:13 AM, Mohammad Amir : @FA Please check this issue ,it still exists and CA reels delivery has stopped. Thank you very much! July 10, 2025 at 12:14 AM, Mohammad Amir : @Sopronyi Gábor Please check this issue on priority, production will be affected. Thank you very much! July 10, 2025 at 12:15 AM, 김현태 : NC AN Robot #1 error Thanks July 10, 2025 at 12:17 AM, Mohammad Amir : @Tuya Ivancsa FA Please check C1CNV072_16_085 there is Data mismatch erorr and it has blocked the stacking materials delivery. Thank you very much! July 10, 2025 at 12:18 AM, Tuya Ivancsa FA : @Selem /Ivancsa FA July 10, 2025 at 12:22 AM, Selem /Ivancsa FA : Magyar kollégák most javítást végeznek ott. July 10, 2025 at 12:23 AM, Selem /Ivancsa FA : This message was deleted. July 10, 2025 at 12:31 AM, Mohammad Amir : @FA @Imre Please check this issue it exists since yesterday 23:53 and CA reels delivery has stopped. Thank you very much! July 10, 2025 at 12:45 AM, 김현태 : NC CA ROBOT #3 error Thanks July 10, 2025 at 12:57 AM, Mohammad Amir : @FA @Imre Please check NC AN RTV01 it is OOS. Thank you very much! July 10, 2025 at 12:57 AM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) 양귿 로봇 #2, #3 둘다 멈춰있습니다. 확인 부탁드립니다 July 10, 2025 at 12:59 AM, Mohammad Amir : @Imre @FA @Sopronyi Gábor Please check this issue ,there is shortages of Anode Reels also empty trays delivery getting slowed as well. Thank you very much! July 10, 2025 at 1:09 AM, Mohammad Amir : I have resolved the issue for empty tray located at RTV01 NC AN so now RTV has started to move. @FA @Imre @Sopronyi Gábor Could you please now check LTA0953 Reel located at CNVA52_07_052 ,it is not moving and blocking reels delivery. Everything is good from MCS RTD side ✅. Please check physically. Thank you very much! July 10, 2025 at 1:20 AM, Mohammad Amir : @FA @Mr.Miti (미티) FA Please arrange someone to check this issue ,there is almost no reels available for production because of this issue. Thank you very much! July 10, 2025 at 1:22 AM, 김현태 : NC AN AGV #5 error Thanks July 10, 2025 at 1:22 AM, Mohammad Amir : Carrier is not moving since yesterday 23:32 so it is been almost 2 hours. Thank you very much! July 10, 2025 at 1:22 AM, Mr.Miti (미티) FA : Checking July 10, 2025 at 1:30 AM, Nguyên : AN NC GF C2STKA71-P11-MCP reel shipping line is broken. please check for me. Thank you July 10, 2025 at 1:36 AM, Mohammad Amir : @FA Please check C1CNV072_P28(16023) there is a carrier MLC4026 shows at this port but in MCS there is nothing that's why carriers are not able to go to P28. Please check physically and inform me on priority there is Stacking materials shortages. Thank you very much! July 10, 2025 at 1:37 AM, Mohammad Amir : Please check this port as well , Theres is Data Loss error at 16023. Thank you very much! July 10, 2025 at 1:38 AM, Nguyên : 4/1 AN GF AGV #5 error Come for me Thank you July 10, 2025 at 1:43 AM, Mohammad Amir : @FA @Imre Please check E0STKC51_C01 there is ready off during Forking error and C1STKC71_C02 there is Load Oversize error. Thank you very much! July 10, 2025 at 1:54 AM, Mohammad Amir : @FA Please check this issue still exists since 1:39 AM. Thank you very much! July 10, 2025 at 1:55 AM, Nguyên : 1/2 AN GF AGV #4 Error Come for me Thank you July 10, 2025 at 2:03 AM, Mohammad Amir : @FA Please check C1STKA72_C01 there is Load Oversize error and it is blocking Anode stacking materials delivery. Please check the issue on priority. Thank you very much! July 10, 2025 at 2:06 AM, Mohammad Amir : @FA Please check E0STKC51_C01,issue still exists since 1:40 AM and because of this reels delivery has stopped. Thank you very much! July 10, 2025 at 2:24 AM, Mohammad Amir : @FA Please check NC AN RTV01 it is OOS again. Thank you very much! July 10, 2025 at 2:27 AM, Sopronyi Gábor : Please check LTA0800 located at E0STKA52_P04_0P01 ,it is not moving and blocking empty trays transfer. Everything is good from MCS RTD side ✅. Please check from SCS side. Thank you very much! Done! It was nothing, crain was too busy July 10, 2025 at 2:34 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 131,CA:142 Pre-Stk ➤ Notching AN: 04,CA:36 Pre-Stk ➤ VD AN: 03,CA: 00 Post-Stock ➤ Stacking AN: 171, CA: 93 VD AN (Process Breakdown) UR: 00,Drying: 104,LR: 04, Wait:96,OOS: 08 VD CA (Process Breakdown) UR: 08,Drying: 100,LR: 20,Wait:60, OOS:20 Thank you very much! July 10, 2025 at 3:08 AM, Mohammad Amir : This message was deleted. July 10, 2025 at 3:09 AM, Mohammad Amir : @FA @Tuya Ivancsa FA Please check MLA6110 located at C1CNV072_16_091 it is not moving and blocking stacking materials delivery. E everything is good from our side. Please check physically. Thank you very much! July 10, 2025 at 3:17 AM, Chinges Fa : MCS please check ST Anode AGV#1 Full magazine there port is full delete job July 10, 2025 at 3:18 AM, Mohammad Amir : Sure, checking! July 10, 2025 at 3:21 AM, Mohammad Amir : Please tell me actual carrier which exists at Stacking line 1-7 P02? Is it MLA6186? Thank you very much! July 10, 2025 at 3:23 AM, Mohammad Amir : Job has been cancelled successfully ✅ And sent the carrier on AGV#1 back to warehouse. Thank you! July 10, 2025 at 3:24 AM, Chinges Fa : Thank you very much July 10, 2025 at 3:24 AM, Mohammad Amir : You are welcome! July 10, 2025 at 3:24 AM, Mohammad Amir : Please help me with this information! Thank you very much! July 10, 2025 at 3:29 AM, Chinges Fa : St Anode Line 1 July 10, 2025 at 3:30 AM, Mohammad Amir : Please write me full id. Is it C1STM070_P02? Thank you very much! July 10, 2025 at 3:33 AM, Chinges Fa : There port material id MLA6144 July 10, 2025 at 4:19 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 131,CA:169 Pre-Stk ➤ Notching AN: 20,CA:38 Pre-Stk ➤ VD AN: 00,CA: 01 Post-Stock ➤ Stacking AN: 151, CA: 87 VD AN (Process Breakdown) UR: 08,Drying: 100,LR: 16, Wait:84,OOS: 08 VD CA (Process Breakdown) UR: 04,Drying: 84,LR: 16,Wait:60, OOS:16 Thank you very much! July 10, 2025 at 4:23 AM, Anita Mirosnicsenko : Hello dear @Mohammad Amir Line 1-2-3 STK, There are very few anode magazines available. Could you please check what the issue is? There are magazines in the warehouse, but the AGV is not delivering them. July 10, 2025 at 4:24 AM, Mohammad Amir : Dear @Anita Mirosnicsenko Currently there is maintenance on C1STKA72 , that's why are witnessing delay in Anode materials transfer to Line 1&2&3. Thank you very much! July 10, 2025 at 4:25 AM, Mohammad Amir : @FA Please inform me is maintenance still going on STKA72? There is shortages of AN stacking materials delivery. Thank you very much! July 10, 2025 at 4:31 AM, P.Bence A SSL : Check again please July 10, 2025 at 4:31 AM, P.Bence A SSL : Now 72 working July 10, 2025 at 4:31 AM, Mohammad Amir : Update:- Issue has been resolved now ✅. Anode stacking materials on the way . I am monitoring. Thank you very much! July 10, 2025 at 4:35 AM, Mohammad Amir : Now , ANODE materials MLA6203 on the way to Line -1 AGV#3. Anode materials MLA6014 on the way to line -2 on AGV#8 ✅ I am monitoring. Thank you very much! July 10, 2025 at 4:38 AM, Anita Mirosnicsenko : Thank you very much! July 10, 2025 at 4:39 AM, Mohammad Amir : You are welcome! July 10, 2025 at 4:48 AM, Mohammad Amir : @Manufacturing Please press LR for VD CA 6-2(P03/04) there is half chamber situation. Thank you very much! July 10, 2025 at 5:04 AM, Mohammad Amir : @FA Please check C1CNV072_P33 there is Data Loss error and it is blocking stacking materials delivery. Please check the issue on priority as there is already a shortages of materials on line -1&2&3. Thank you very much! July 10, 2025 at 5:04 AM, Mohammad Amir : @Tuya Ivancsa FA Please check! Thank you very much! July 10, 2025 at 5:08 AM, Mohammad Amir : This message was deleted. July 10, 2025 at 5:08 AM, Mohammad Amir : @Anita Mirosnicsenko o @P.Bence A SSL Update :- Unfortunately there is some issue with the CNV072 , that's why you are witnessing the delay now in stacking materials delivery. I already informed the FA,They are working on the isuse. Thank you very much! July 10, 2025 at 5:10 AM, Selem /Ivancsa FA : Solved July 10, 2025 at 5:10 AM, Mohammad Amir : Thank you very much! July 10, 2025 at 5:11 AM, Mohammad Amir : Update: Issue has been resolved with CNV072 and stacking materials delivery to Line-1&2&3 has been normalized ✅. Thank you very much! July 10, 2025 at 5:19 AM, 최명운(CHOI MYOUNGWOON) : @Manufacturing SL Please pause the empty magazine input to C1CNV072 M02,03. There are too many empty magazine transfers. July 10, 2025 at 5:30 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 154,CA:159 Pre-Stk ➤ Notching AN: 21,CA:45 Pre-Stk ➤ VD AN: 02,CA: 00 Post-Stock ➤ Stacking AN: 153,CA: 87 VD AN (Process Breakdown) UR: 00,Drying: 108,LR: 12, Wait:76,OOS: 08 VD CA (Process Breakdown) UR: 00,Drying: 92,LR: 12,Wait:60, OOS:20 Thank you very much! July 10, 2025 at 6:08 AM, Debreczeni Ármin : @Mohammad Amir Good morning. An post vd is working now? July 10, 2025 at 6:08 AM, Debreczeni Ármin : I heard night shift was problem with it. July 10, 2025 at 6:08 AM, Csanálosi Gábor FA : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.10. 9+0/12+1 Tech, 0Sl, 1Sup. Overtime(1): Harasztia Zoltán Holiday(4): Böröczki Balázs, Denkó János, Szücs Géza, Boromisza Zoltán Sick(0): Shift Change(0): --------------- Electrode(4): Rácz Dániel, Böröcz Tamás, Czeilinger Krisztián, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, TakácsÁdám, NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): , Pálosi Róbert, Pintye Miklós --------------- Form/Modul( July 10, 2025 at 6:11 AM, duzzaman Md (MCS) : Good morning! Everything seems normal now. Thanks! July 10, 2025 at 6:14 AM, Debreczeni Ármin : I hope so because an material is missing from lines July 10, 2025 at 6:19 AM, Mohammad Amir : Good morning, There were several issue with the Post VD Warehouse ,CNV072,missing data ,all of these resulted in slowing materials delivery to stacking. However since dawn everything became normal ,I have informed my colleague he will pay extra attention to the stacking area. Have a good day! Thank you very much! July 10, 2025 at 6:24 AM, Debreczeni Ármin : Thank you so much July 10, 2025 at 6:24 AM, Mohammad Amir : You are most welcome! July 10, 2025 at 6:27 AM, duzzaman Md (MCS) : @FA Please check E0STKC52_C02 there is Fork#2 Received data error. Thank you very much! July 10, 2025 at 6:31 AM, 방혁 PM(Bang.Hyuk) FA : @Csanálosi Gábor FA July 10, 2025 at 6:51 AM, duzzaman Md (MCS) : @FA PLEASE CHECHK C1CNV072_P21/P22 Light curtain error Thank you July 10, 2025 at 6:51 AM, Csanálosi Gábor FA : Done July 10, 2025 at 6:56 AM, Böröcz Tamás : Anód RTV nem megy July 10, 2025 at 6:57 AM, Takács Ádám FA Tech : Hiba nincs de körül nézek July 10, 2025 at 6:58 AM, Böröcz Tamás : Látom de nem megy 😅 July 10, 2025 at 6:59 AM, Takács Ádám FA Tech : Hát hogy menne már? Nincs neki lába 😂 July 10, 2025 at 7:20 AM, Takács Ádám FA Tech : @MCS if necessary, can you charge the RTV buffer ports on the anode side? There will be a fix that requires stopping the CV supplying the RTV unit July 10, 2025 at 7:25 AM, duzzaman Md (MCS) : Unfortunately, we don't not have the authority. July 10, 2025 at 7:27 AM, Lan Nhi : @FA Hello. Please help me remove the remaining pallets in machine 6-5 VD/ An. Thank you very much. July 10, 2025 at 7:44 AM, Debreczeni Ármin : Anode coming very slow to stacking is there any problem? July 10, 2025 at 7:49 AM, duzzaman Md (MCS) : No problem. Theres are active jobs. All created within last 7 mins. July 10, 2025 at 7:53 AM, Ngoc zia : Vd ca line 4-8 #agv 5 error July 10, 2025 at 8:10 AM, Takács Ádám FA Tech : @all An RTV 7054 és 7055 portot NE indítsa vissza senki mert szét van szedve July 10, 2025 at 8:26 AM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 164,CA:141 Pre-Stk ➤ Notching AN: 22,CA:37 Pre-Stk ➤ VD AN: 01,CA: 00 Post-Stock ➤ Stacking AN: 136,CA: 26 VD CA (Process Breakdown) UR: 00,Drying: 104,LR: 20,Wait:16, OOS:20 VD AN (Process Breakdown) UR: 04,Drying: 92,LR: 36,Wait:76, OOS:08 Thank you very much! July 10, 2025 at 8:31 AM, 김동섭 : I have MCS@AN VD 6-5 P1 plate ID MLA6249. Please unload it. July 10, 2025 at 8:34 AM, duzzaman Md (MCS) : It shows empty here in MCS. Please transfer it manually. Or you you write us the carrier no and confirm it, we'll install and send it back to the STK. July 10, 2025 at 8:39 AM, 김동섭 : AN VD ROOM AGV ALL STOP July 10, 2025 at 8:42 AM, Sazzad Bhai SKon : MCS transport order is normal July 10, 2025 at 8:46 AM, 이한웅(삼구) : NC Ca #6 AGV 5-1 앞에서 아무것도 없는데 센서 알람 발생해서 정지/이동 반복중입니다. @방혁 PM(Bang.Hyuk) FA July 10, 2025 at 9:18 AM, 김동섭 : CA VD 5-3 P1 Plate ID MLC6375 does not have #1 magazine ID July 10, 2025 at 9:23 AM, Ngoc zia : Nc ca robot 2 #agv8 error July 10, 2025 at 9:23 AM, Ngoc zia : Nc ca 5.1 inline error July 10, 2025 at 9:24 AM, Sazzad Bhai SKon : According to MCS log it has 6 magazines. But MES data shows 5 magazines! Checking previous logs July 10, 2025 at 9:25 AM, 김동섭 : CA VD 5-3 P1,P2 After returning, should I re-upload LR? July 10, 2025 at 9:26 AM, Sazzad Bhai SKon : Yes please reupload LR July 10, 2025 at 9:30 AM, Sazzad Bhai SKon : In MES magazine MC6071 is Missing. But MCS log shows this magazine was received at today 08:11 from C0PVC010_P06 gantry @manufacturing please confirm all the magazines for this pallet July 10, 2025 at 9:33 AM, 김동섭 : I would like to request a return of CA VD 5-3 P1, P2. Please assign an AGV. thank you July 10, 2025 at 9:35 AM, Sazzad Bhai SKon : @연해리 hello pm, We need to check why MC6071 magazine is missing from plate MLC6375. MES replied rack in valid request Successful at 08:13 July 10, 2025 at 9:37 AM, duzzaman Md (MCS) : Transfer order created. Thank you! July 10, 2025 at 9:37 AM, 방혁 PM(Bang.Hyuk) FA : He is not working today July 10, 2025 at 9:38 AM, Ngoc zia : @fa Hi . Some one can come to fix pls July 10, 2025 at 10:16 AM, duzzaman Md (MCS) : @FA Please check E0CNVA51 , Unit name E0SLA020_P03 there is PIO complete on time over error. Thank you! July 10, 2025 at 10:18 AM, Debreczeni Ármin : @duzzaman Md (MCS) please share lot quantity July 10, 2025 at 10:22 AM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 165,CA:139 Pre-Stk ➤ Notching AN: 18,CA:22 Pre-Stk ➤ VD AN: 02,CA: 15 Post-Stock ➤ Stacking AN: 100,CA: 00 VD CA (Process Breakdown) UR: 00,Drying: 100,LR: 04,Wait:00, OOS:24 VD AN (Process Breakdown) UR: 24,Drying: 64,LR: 28 ,Wait:72, OOS:08 Thank you very much! July 10, 2025 at 10:24 AM, Debreczeni Ármin : Ca 0? July 10, 2025 at 10:26 AM, duzzaman Md (MCS) : Yes， there are 175 , for lot count its becoming 95, for carrier state it's becoming 26, RTD hold is making it 0 July 10, 2025 at 10:37 AM, Sazzad Bhai SKon : Update: I see lot id for MC6071 is different from other 5 July 10, 2025 at 10:37 AM, KIM SEYEON [김세연]_FA invited 최병준. July 10, 2025 at 10:37 AM, KIM SEYEON [김세연]_FA : . July 10, 2025 at 11:09 AM, Ngoc zia : Nc ca #robot 1 error July 10, 2025 at 11:21 AM, 박강민 : AN VD 1-4 좌측상단 플레이트 안착불량 입니다. AGV 재안착 부탁드립니다. July 10, 2025 at 11:29 AM, 김동섭 : AN VD ROOM #2 AGV 경로이탈 VD 충돌발생 July 10, 2025 at 11:30 AM, KIM SEYEON [김세연]_FA : 확인해 보겠습니다. July 10, 2025 at 11:35 AM, 심재훈 : 충돌이 많네요. 설비이상 유무 봐주세요. Bcr같은것들이 틀어질 수 있겠네요 July 10, 2025 at 11:41 AM, Ngoc zia : @FA VD Ca 3-8 Drying failure due to alarm occurrence during drying. The door is open. Please return it manually to the Magazine STK-72 warehousing by agv. Thank you July 10, 2025 at 11:44 AM, Ngoc zia : @rtd can u check 6-2 vd ca pls. Haft chamber July 10, 2025 at 11:48 AM, duzzaman Md (MCS) : Please raise LR July 10, 2025 at 11:49 AM, Xeng : NC CA agv#7 error July 10, 2025 at 11:59 AM, 김동섭 : CA VD 6-2 LR START July 10, 2025 at 12:00 PM, duzzaman Md (MCS) : LR wasbl successful July 10, 2025 at 12:01 PM, duzzaman Md (MCS) : @Fa Please check the manual port M01 of C1STKC71 It's OOS Thanks ! July 10, 2025 at 12:05 PM, 김지수PM(Gyuri)_FA : @fa please check E0CNVC52_M09 (LTC1072)> not moving July 10, 2025 at 12:20 PM, Kovács Ágnes : Done July 10, 2025 at 12:22 PM, 김지수PM(Gyuri)_FA : Thanks! July 10, 2025 at 12:22 PM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 172,CA:130 Pre-Stk ➤ Notching AN: 22,CA:18 Pre-Stk ➤ VD AN: 03,CA: 13 Post-Stock ➤ Stacking AN: 82,CA: 28 VD CA (Process Breakdown) UR: 32,Drying: 76,LR: 44,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 04,Drying: 112,LR: 28 ,Wait:68, OOS:08 Thank you very much! July 10, 2025 at 1:08 PM, Debreczeni Ármin : Is there any deivering problem on stacking? Line 1 and 2 almost empty July 10, 2025 at 1:10 PM, Debreczeni Ármin : And why empty AN magazines in CA storage? July 10, 2025 at 1:10 PM, Debreczeni Ármin : @Takács Ádám FA Tech földszinten vagy? July 10, 2025 at 1:11 PM, duzzaman Md (MCS) : We'll check July 10, 2025 at 1:13 PM, 심재훈 : 라인 정지 없게 지원 부탁 드립니다. 모니터링 하고 계신분들 계신거죠? July 10, 2025 at 1:14 PM, Sazzad Bhai SKon : Which one? please write carrier/port name July 10, 2025 at 1:14 PM, Sazzad Bhai SKon : There are jobs. July 10, 2025 at 1:16 PM, Debreczeni Ármin : We try keep operate all lines. Sl's and me watch continiously the supply July 10, 2025 at 1:16 PM, Debreczeni Ármin : Fa member can check it July 10, 2025 at 1:17 PM, Böröcz Tamás : STKC72 025903 MLA6209 July 10, 2025 at 1:19 PM, Böröcz Tamás : Egyébként az egy használaton kívüli polc szóval féltelezem a távol keleti barátaink juttatták oda July 10, 2025 at 1:20 PM, Debreczeni Ármin : Én csak véletlen kiszurtam July 10, 2025 at 1:20 PM, Debreczeni Ármin : Can you share lot quantity? July 10, 2025 at 1:22 PM, 심재훈 : @KIM SEYEON [김세연]_FA 물류 순환현황을 자동화에서 볼 수가 없나요? 얼마나 잡이 몰려 있는지, 몇시간동안 공급을 안했는지등 모니터링을 하고 계신거죠? July 10, 2025 at 1:23 PM, Sazzad Bhai SKon : There was a manual job from CNV port to cathode STK. Today at 01:08 am. July 10, 2025 at 1:25 PM, Sazzad Bhai SKon : Please transfer the material to anode STK manually July 10, 2025 at 1:28 PM, Debreczeni Ármin : In the past one hour no CA delivered to Line 1 July 10, 2025 at 1:30 PM, duzzaman Md (MCS) : Dear @Debreczeni Ármin , GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 176, ,CA:126 Pre-Stk ➤ Notching AN: 28,CA:00 Pre-Stk ➤ VD AN: 01,CA: 16 Post-Stock ➤ Stacking AN: 83,CA: 43 VD CA (Process Breakdown) UR: 00,Drying: 92,LR: 28,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 00,Drying: 144,LR: 12 ,Wait:56, OOS:08 Thank you very much! July 10, 2025 at 1:30 PM, Sazzad Bhai SKon : CA materials are on the way. Please wait a bit July 10, 2025 at 1:30 PM, Debreczeni Ármin : Thank you July 10, 2025 at 1:30 PM, Debreczeni Ármin : Allright we wait July 10, 2025 at 1:34 PM, 박강민 : CA VD 2-1 좌측하단 플레이트 안착불량 입니다. AGV 재안착 부탁드립니다. July 10, 2025 at 1:35 PM, duzzaman Md (MCS) : @FA Please check C1STKC71_M02_OP01 there is Data Mismatch error. Thank you very much! July 10, 2025 at 1:36 PM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. July 10, 2025 at 1:36 PM, 방혁 PM(Bang.Hyuk) FA : Solved July 10, 2025 at 1:41 PM, Ngoc zia : @fa vd ca 2-1 #10 left under wrong position of plate. Pls take out & input again pls. July 10, 2025 at 1:56 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please increase the priority of e0stka51 7049 7043 track? July 10, 2025 at 1:57 PM, 김지수PM(Gyuri)_FA : 7043 > e0stka51 p01 Seems like doesn't need to increase the 7049, just need 7043 July 10, 2025 at 1:59 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Please increase the priority of 12003(c1stka71_p21) for a while. Thanks! July 10, 2025 at 2:01 PM, Ngoc zia : Vd ca CV-114,115 conveyor error July 10, 2025 at 2:02 PM, duzzaman Md (MCS) : Both done, Gyuri..thank you July 10, 2025 at 2:07 PM, 김지수PM(Gyuri)_FA : Thanks a lot° July 10, 2025 at 2:15 PM, Debreczeni Ármin : St conveyor around po7 out is stopped July 10, 2025 at 2:16 PM, Debreczeni Ármin : The whole st conveyor is not working July 10, 2025 at 2:18 PM, duzzaman Md (MCS) : @FA Please check MLC2004 at C1CNV072_P16 it's noy moving for a while. Thank you! July 10, 2025 at 2:21 PM, duzzaman Md (MCS) : @FA Please check E0STKC52__C01 It's OOS. Thank you! July 10, 2025 at 2:22 PM, 김동섭 : This is a CA VD 1-2 half chamber. Please confirm. July 10, 2025 at 2:24 PM, Sazzad Bhai SKon : @Debreczeni Ármin this is the issue for stacking 1 line CA materials delay July 10, 2025 at 2:26 PM, Debreczeni Ármin : Yes I see. I am near the problem. July 10, 2025 at 2:30 PM, duzzaman Md (MCS) : Please raise LR again. July 10, 2025 at 2:35 PM, 김동섭 : I uploaded LR again thank you July 10, 2025 at 2:35 PM, duzzaman Md (MCS) : It was successful July 10, 2025 at 3:09 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 156, ,CA:92 Pre-Stk ➤ Notching AN: 16,CA:03 Pre-Stk ➤ VD AN: 02,CA: 07 Post-Stock ➤ Stacking AN: 57,CA: 40 VD CA (Process Breakdown) UR: 00,Drying: 120,LR: 20,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 04,Drying: 156,LR: 08 ,Wait:36, OOS:08 Thank you very much! July 10, 2025 at 3:29 PM, 김희래 : @FA Please check GF AN NC AGV#01. There is no error and AGV is stopped. July 10, 2025 at 3:30 PM, 방혁 PM(Bang.Hyuk) FA : @mcs Please check transfer status for MLC5115 July 10, 2025 at 3:30 PM, 방혁 PM(Bang.Hyuk) FA : This carrier is not in C1CNV072 July 10, 2025 at 3:31 PM, 방혁 PM(Bang.Hyuk) FA : Oh iam sorry it is 1F carrier July 10, 2025 at 3:33 PM, duzzaman Md (MCS) : Yes, it is. Thank you ! July 10, 2025 at 4:14 PM, Debreczeni Ármin : @duzzaman Md (MCS) please share lot quantity again thank you July 10, 2025 at 4:21 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 142 ,CA:90 Pre-Stk ➤ Notching AN: 15 ,CA:07 Pre-Stk ➤ VD AN: 05 CA: 42 Post-Stock ➤ Stacking AN: 55, CA: 00 VD CA (Process Breakdown) UR: 28,Drying: 144,LR: 04,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 12,Drying: 128,LR: 28 ,Wait:32, OOS:08 Thank you very much! July 10, 2025 at 4:35 PM, Debreczeni Ármin : Is it real? An hour ago post vd ca stock was 40 July 10, 2025 at 4:47 PM, duzzaman Md (MCS) : Now available 21. July 10, 2025 at 5:34 PM, 이한웅(삼구) : please check NC Ca #3 AGV July 10, 2025 at 5:44 PM, 박시우 : @FA Please check AN Robot 3 MGZ detect sensor error July 10, 2025 at 5:59 PM, Hồng Anh SL NC&VD 1F : Pls check for AGV 8 Robot 2 and 3 AN side pls. July 10, 2025 at 6:12 PM, 최병준 : @FA Please check AN robot #1 MGZ unloading failure July 10, 2025 at 6:14 PM, 박시우 : @FA Please come to AN NC room immediately. July 10, 2025 at 6:20 PM, 조한진(Jin) : Re check Please. thank you~ July 10, 2025 at 6:21 PM, 김지수PM(Gyuri)_FA : @fa please check e0cnvc52 > not moving July 10, 2025 at 6:23 PM, 김지수PM(Gyuri)_FA : Transfer jobs have been delaying more than 3 hours. Please check July 10, 2025 at 6:26 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 97 ,CA:87 Pre-Stk ➤ Notching AN: 37 ,CA:00 Pre-Stk ➤ VD AN: 02, CA: 63 Post-Stock ➤ Stacking AN: 72, CA: 00 VD CA (Process Breakdown) UR: 00,Drying: 160 ,LR: 00,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 12,Drying: 112, LR: 10 ,Wait:62, OOS:08 July 10, 2025 at 6:33 PM, Chinges Fa : MCS please check NC ANODE AGV#4 idle July 10, 2025 at 6:34 PM, Zaya/ivancsa FA : Solved July 10, 2025 at 6:34 PM, 김지수PM(Gyuri)_FA : Thanks! July 10, 2025 at 6:35 PM, P.Bence A SSL : @VK (mcs) please check L3 stacking anode LR request July 10, 2025 at 6:37 PM, VK (mcs) : Transport job created July 10, 2025 at 6:39 PM, VK (mcs) : @FA Please check Anode Notching Gantry , MGZs are not transferring to the STK. C1CNVA71 July 10, 2025 at 6:41 PM, VK (mcs) : There is only one anode transfer job to line 3 July 10, 2025 at 6:42 PM, VK (mcs) : @FA @manufacturing Can you please check Circular conveyor C1CNV072 port 23(16018) Is there any carrier in the port? July 10, 2025 at 6:43 PM, Zaya/ivancsa FA : MLA6099 July 10, 2025 at 6:43 PM, VK (mcs) : Can you please check both side July 10, 2025 at 6:44 PM, Zaya/ivancsa FA : Yes, it's the same. July 10, 2025 at 6:45 PM, VK (mcs) : Thanks for confirmation July 10, 2025 at 6:46 PM, VK (mcs) : @김지수PM(Gyuri)_FA There is a carrier mismatch location for MLA6099 CCS: C1CNV072-P23 MCS:C5VDA040_P01 July 10, 2025 at 6:53 PM, 김지수PM(Gyuri)_FA : Is it possible to update the location of MLA6099 in mcs? July 10, 2025 at 6:54 PM, 김지수PM(Gyuri)_FA : What I meant, I can change the location but is there any risk if I change the location by myself? July 10, 2025 at 6:55 PM, VK (mcs) : It’s possible, but if carrier in VD has a same id, then location will change to VD after new transition. It seems we have a 2 carriers with a same id or one of them has a wrong id. July 10, 2025 at 6:56 PM, 김지수PM(Gyuri)_FA : Wait I will check it July 10, 2025 at 7:00 PM, 김지수PM(Gyuri)_FA : I checked the MLA6099(the carrier has the carrier ID like that) now is in the an vd 5-4 chamber and drying process started 15:03 and maybe gonna finish 20:03. Maybe it would be great for us to remove the MLA6099 on the CNV July 10, 2025 at 7:01 PM, 김지수PM(Gyuri)_FA : Or I gonna update the carrier information the carrier on the cnv(vd > cnv) and after the drying process(about 1 hour later) we can check the plate in the VD July 10, 2025 at 7:01 PM, VK (mcs) : Yes, it’s, because it blocks the way and delivering material to the stacking has delay. July 10, 2025 at 7:02 PM, 김지수PM(Gyuri)_FA : I will update the location thanks for checking July 10, 2025 at 7:02 PM, VK (mcs) : It’s better to check both carriers and then modification. Thank you July 10, 2025 at 7:04 PM, 김지수PM(Gyuri)_FA : @Zaya/ivancsa FA zaya, the carrier on the C1CNV072_P23 was the MLA6099 right? (Both side of carrier, left and right) July 10, 2025 at 7:05 PM, Zaya/ivancsa FA : 5-4 opening now July 10, 2025 at 7:05 PM, Zaya/ivancsa FA : And it’s MLA6099 July 10, 2025 at 7:06 PM, 김지수PM(Gyuri)_FA : Okey I will let person in charge know, after check the barcode of mla6099 on CNV72 July 10, 2025 at 7:06 PM, Zaya/ivancsa FA : yes July 10, 2025 at 7:07 PM, Zaya/ivancsa FA : left and right MLA6099 July 10, 2025 at 7:09 PM, 김지수PM(Gyuri)_FA : Thanks! @VK (mcs) then I gonna change the location of mla6099 from vd to cnv, And @Zaya/ivancsa FA please check whether the mla6099 on vd will be transferred or not thanks! July 10, 2025 at 7:11 PM, 김지수PM(Gyuri)_FA : Updated July 10, 2025 at 7:12 PM, Spilka Sofia : Dear @VK (mcs) We kindly ask for clarification regarding the delayed delivery of anode material to Line 1. Could you please inform us of the reason for this delay and whether it can be resolved? Thank you in advance for your support. July 10, 2025 at 7:13 PM, VK (mcs) : Can you please tell me which area? July 10, 2025 at 7:15 PM, VK (mcs) : I am sending it back to STK, it is won’t be get a job. July 10, 2025 at 7:16 PM, Spilka Sofia : Line 1 Stacking July 10, 2025 at 7:16 PM, 김지수PM(Gyuri)_FA : No available materials July 10, 2025 at 7:18 PM, VK (mcs) : There was an issue in one of the conveyor anode port, but issue has been resolved . It will be normal now. Thx July 10, 2025 at 7:22 PM, 이주봉PM LEE JUBONG(FA) : @인제(Hwang) MLA6099 이거 실제 중복 LOT 입니다. 1개는 스택 반송중이고 1개는 VD 음극 5-4 설비에 있습니다. 확인부탁해요~ July 10, 2025 at 7:25 PM, Spilka Sofia : Thank you July 10, 2025 at 7:30 PM, 김지수PM(Gyuri)_FA : @fa Please check E0stka51 thanks July 10, 2025 at 7:30 PM, 김지수PM(Gyuri)_FA : E0CNVa51_P01 > E0stka51 July 10, 2025 at 7:32 PM, 김지수PM(Gyuri)_FA : @VK (mcs) could you please increase the priority of e0stkc51_p01(9043) for a while? July 10, 2025 at 7:33 PM, 김지수PM(Gyuri)_FA : 9empty trays are waiting to be transferred to C51, and now the rtv has been stopped July 10, 2025 at 7:34 PM, VK (mcs) : Priority increased July 10, 2025 at 7:50 PM, VK (mcs) : @FA Please check Anode Pre-STK A71 port 20(6010) MLA0190 has destination to it, but it’s not transferring for a while. July 10, 2025 at 7:54 PM, Nguyên : 4/3. CA GF AGV #2 Error Come for me Thank you July 10, 2025 at 7:58 PM, Chinges Fa : Done July 10, 2025 at 7:58 PM, Natsag/ Ivansca FA : done July 10, 2025 at 8:06 PM, Natsag/ Ivansca FA : MCS please NC CA AGV#4 Full magazine there port is full delete job July 10, 2025 at 8:07 PM, P.Bence A SSL : @VK (mcs) Please delete all LR request L1 stacking thank you ! July 10, 2025 at 8:07 PM, VK (mcs) : Done July 10, 2025 at 8:10 PM, VK (mcs) : All load requests cleared. July 10, 2025 at 8:11 PM, 인제(Hwang) : Ca VD 1-6 half chamber. Please check LR July 10, 2025 at 8:12 PM, VK (mcs) : There is only one job to line 1 STM110-p01 Would you want me to cancel this job as well? July 10, 2025 at 8:15 PM, VK (mcs) : For empty ports jobs terminated.at 15:49 Please apply LR for ports 1 &2 July 10, 2025 at 8:18 PM, 인제(Hwang) : Re-check please July 10, 2025 at 8:19 PM, 김지수PM(Gyuri)_FA : @VK (mcs) I created the job for AN VD 5-4 P01 (just only for 1 carrier, because of duplicated carrier issue). FYI 🫠 July 10, 2025 at 8:20 PM, VK (mcs) : LR received and carriers have been assigned. July 10, 2025 at 8:21 PM, 인제(Hwang) : Thank you! July 10, 2025 at 8:21 PM, VK (mcs) : Thank you , I will monitor it July 10, 2025 at 8:30 PM, 심재훈 : Could you share the current situations? July 10, 2025 at 8:30 PM, Anita Mirosnicsenko : Hello! Line 3 STK (stk10) AGV#7 stopped, please check! July 10, 2025 at 8:31 PM, Anita Mirosnicsenko : And AGV#6 line 3 ( stk 18) July 10, 2025 at 8:32 PM, Victory : Hello, VD CA GF Agv #4 stopped Pls check July 10, 2025 at 8:35 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 71 ,CA:59 Pre-Stk ➤ Notching AN: 53 ,CA:06 Pre-Stk ➤ VD AN: 03 , CA: 76 Post-Stock ➤ Stacking AN: 69, CA: 02 VD CA (Process Breakdown) UR: 42, Drying: 100 ,LR: 34 ,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 00,Drying: 120, LR: 08, Wait:70, OOS:08 July 10, 2025 at 8:36 PM, 심재훈 : Thank you July 10, 2025 at 8:36 PM, Tuya Ivancsa FA : Solved July 10, 2025 at 8:36 PM, Zaya/ivancsa FA : solved July 10, 2025 at 8:38 PM, VK (mcs) : FYI MLA6099 SCS, MCS: C1STKA72 (0105802) Another one is in the stacking :C3STM170_P02 July 10, 2025 at 8:38 PM, Tuya Ivancsa FA : Solved July 10, 2025 at 8:38 PM, Anita Mirosnicsenko : Thank you very much! July 10, 2025 at 8:47 PM, 김지수PM(Gyuri)_FA : Yes, this was the case we talked about 1.5hours ago, the carrier was on the c1cnv072_P31 and an vd 5-4 at the same time. We made this shelf(mla6099, 0105802) disabled for the confirmation(duplicated carrier) from person in charge July 10, 2025 at 8:47 PM, 김지수PM(Gyuri)_FA : . July 10, 2025 at 8:49 PM, P.Bence A SSL : Ca VD Agv 3 stop please check !!! July 10, 2025 at 8:52 PM, 김지수PM(Gyuri)_FA : But maybe unload request will be impossible for MLA6099 now in stacking. I checked the location of mla6099 is c1stka72. I think it would be great for us to rack out the mla6099 in the c72 and update the location from c72 to stm July 10, 2025 at 8:55 PM, VK (mcs) : Yes correct, since location is in STK, then unloading from Stacking area is not possible automatically, It’s better to rack-out the carrier in Stocker and change the ID, after that we can modify location of MLA6099 to the stacking area. July 10, 2025 at 8:56 PM, 김지수PM(Gyuri)_FA : I requested our colleague to rack out the mla6099, and then I gonna update the location. Thanks! July 10, 2025 at 8:56 PM, VK (mcs) : Thank you 🙏 July 10, 2025 at 9:10 PM, P.Bence A SSL : @VK (mcs) all Agv only stay Why not working ????? L4-5-6 July 10, 2025 at 9:10 PM, P.Bence A SSL : All Agv stop July 10, 2025 at 9:12 PM, VK (mcs) : @AGV Can you please check it, July 10, 2025 at 9:12 PM, Zaya/ivancsa FA : All AGVs are working. July 10, 2025 at 9:14 PM, P.Bence A SSL : @VK (mcs) Check L5 stacking LR request please thank you ! July 10, 2025 at 9:15 PM, P.Bence A SSL : Anode July 10, 2025 at 9:15 PM, VK (mcs) : 3 jobs assigned to line 5th July 10, 2025 at 9:27 PM, 김현태 : NC AN AGV #4 error Thanks July 10, 2025 at 10:01 PM, 인제(Hwang) : NC Ca AGV#10 Error July 10, 2025 at 10:05 PM, Chinges Fa : Solved July 10, 2025 at 10:07 PM, P.Bence A SSL : @VK (mcs) Delete all LR request L2 stacking please thank you . July 10, 2025 at 10:09 PM, VK (mcs) : There is no LR for line 2, Only one job exists by AGV 10. July 10, 2025 at 10:10 PM, P.Bence A SSL : Please check again . July 10, 2025 at 10:20 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 48 ,CA:34 Pre-Stk ➤ Notching AN: 47, CA:07 Pre-Stk ➤ VD AN: 00 , CA: 52 Post-Stock ➤ Stacking AN: 74 , CA: 26 VD CA (Process Breakdown) UR: 04, Drying: 80 ,LR: 58 ,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 00,Drying: 128 , LR: 04, Wait:56, OOS:08 July 10, 2025 at 10:24 PM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) 양극 VD 4-9 좌측하단 플레이트 안착불량입니다. P01&02 창고반송 부탁드립니다 July 10, 2025 at 10:32 PM, P.Bence A SSL : @VK (mcs) Check L6 stacking left side LR request please . July 10, 2025 at 10:36 PM, VK (mcs) : 2 anode carriers are on the way July 10, 2025 at 10:49 PM, Hồng Anh SL NC&VD 1F : @Victory July 10, 2025 at 10:50 PM, 김정희(Jeong hee FA) : @VK (mcs) An VD 5-4 po2. po3.po4. Please send STKA72, thank you. July 10, 2025 at 10:51 PM, 김정희(Jeong hee FA) : @VK (mcs) July 10, 2025 at 10:56 PM, VK (mcs) : Transport job created July 10, 2025 at 11:07 PM, P.Bence A SSL : @VK (mcs) There are ca full plates waiting at the ports but Agv is not coming to pick them up, please check. July 10, 2025 at 11:15 PM, P.Bence A SSL : Check again please July 10, 2025 at 11:17 PM, VK (mcs) : All AGVs are busy. For all of them job already assigned. July 10, 2025 at 11:25 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 26 ,CA:30 Pre-Stk ➤ Notching AN: 53, CA:00 Pre-Stk ➤ VD AN: 01 , CA: 44 Post-Stock ➤ Stacking AN: 87 , CA: 58 VD CA (Process Breakdown) UR: 18, Drying: 100 ,LR: 64 ,Wait:00, OOS:20 VD AN (Process Breakdown) UR: 04 ,Drying: 124 , LR: 06, Wait:76, OOS:08 July 11, 2025 at 12:28 AM July 11, 2025 at 12:28 AM, 조한진(Jin) : @지석범PM (이반차FA) 안녕하세요.ST 5Line에 있는 MLA4401에 V/D 건조가 안된 M/Z이 섞여 있었다고 하는데 M/Z 번호는 MA3027입니다. 이게 OP 실수로 섞어 놓은건지 창고에서 자재가 나온건지 확인을 하고 싶은데 가능할까요? July 11, 2025 at 12:41 AM, 지석범PM (이반차FA) : 잠시만 기다려주세요 July 11, 2025 at 12:55 AM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) VD Ca 4-9 좌측하단 안착불량 재발생했습니다. P01&02 수동반송 부탁드리며 점검 부탁드립니다 July 11, 2025 at 12:56 AM, 지석범PM (이반차FA) : RTD 데이터상으로는 말씀하신 플레이트에 MA5167,2456,1453,3013,1573,2353이 적재되어 있어야 하고 전일 12:56분 챔버에 투입된 후, 17:14분 agv로 정상 반송하고, 20:57분 스테이션에 반송한 플레이트 입니다. 현재 확인한 내용이고, 추가로 더 확인후에 밀씀드리겠습니다. July 11, 2025 at 1:02 AM, P.Bence A SSL : Check again please thank you July 11, 2025 at 1:15 AM, 조한진(Jin) : 감사드립니다~ July 11, 2025 at 1:19 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 17, CA:35 Pre-Stk ➤ Notching AN: 27 , CA:00 Pre-Stk ➤ VD AN: 00 , CA: 39 Post-Stock ➤ Stacking AN: 117 , CA: 47 VD CA (Process Breakdown) UR: 00, Drying: 176 ,LR: 18, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 12 ,Drying: 112 , LR: 068 Wait:76, OOS:08 July 11, 2025 at 1:33 AM, Natsag/ Ivansca FA : @ MCS NC AN AGV#4 idle. Please check Thank you! July 11, 2025 at 1:40 AM, VK (mcs) : Done July 11, 2025 at 1:52 AM, 최명운(CHOI MYOUNGWOON) : 수동 반송 후 다음 LR AGV#3 안착 이상없이 진행 되어 4-9건조 시작하였습니다 @인제(Hwang) July 11, 2025 at 1:53 AM, 인제(Hwang) : 감사합니다! July 11, 2025 at 2:30 AM, 조한진(Jin) : Re check please~ thank you July 11, 2025 at 2:34 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 09, CA:32 Pre-Stk ➤ Notching AN: 10, CA:00 Pre-Stk ➤ VD AN: 02 , CA: 53 Post-Stock ➤ Stacking AN: 132 , CA: 32 VD CA (Process Breakdown) UR: 03, Drying: 184 ,LR: 08, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 14, Drying: 108 , LR: 14, Wait:80, OOS:08 July 11, 2025 at 2:56 AM, 김현태 : NC AN AGV #1 error Thanks July 11, 2025 at 2:57 AM, 김현태 : NC AN Robot #1 error Thanks July 11, 2025 at 3:46 AM, P.Bence A SSL : Check again please July 11, 2025 at 3:57 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 13, CA:37 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 00 , CA: 44 Post-Stock ➤ Stacking AN: 143 , CA: 34 VD CA (Process Breakdown) UR: 08 , Drying: 160 ,LR: 16, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 10, Drying: 120 , LR: 04 , Wait:80, OOS:08 July 11, 2025 at 5:23 AM, VK (mcs) : @FA Please check Cathode reel STKC51 Crane Inactive stop July 11, 2025 at 5:28 AM, 전 운 (Jeon Woon) : Please Rechecking July 11, 2025 at 5:33 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 57, CA:56 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 02, CA: 25 Post-Stock ➤ Stacking AN: 144 , CA: 42 VD CA (Process Breakdown) UR: 07 , Drying: 136, LR: 22, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 01, Drying: 116 , LR: 04 , Wait:76, OOS:08 July 11, 2025 at 5:40 AM, VK (mcs) : Any action? Conveyor on electrode side is full , please take look, thx July 11, 2025 at 5:42 AM, Zaya/ivancsa FA : crane is Moving now July 11, 2025 at 5:59 AM, Shakir (MCS) : Good morning @FA Please check Cathode reel RTV error. Thank you July 11, 2025 at 6:00 AM, Yon Ko/연커/ : @FA tech Good morning Nc Ca RTV data loss error pls check thank u! July 11, 2025 at 6:07 AM, Shakir (MCS) : Good morning @All GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 62, CA:58 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 03, CA: 26 Post-Stock ➤ Stacking AN: 130 , CA: 29 VD AN (Process Breakdown) UR: 00, Drying: 108 , LR: 08 , Wait:60, OOS:08 VD CA (Process Breakdown) UR: 00, Drying: 124, LR: 00, Wait:00, OOS:20 Thank you July 11, 2025 at 6:09 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(3) Fabricius Gergő Nagy Tamás Gégény Dávid ———————————— Assembly GF(3) Győri József Kertész Dani Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 11, 2025 at 6:15 AM, Shakir (MCS) : @Lajos Gábor F.A. Please check NC CA RTV. Thanks July 11, 2025 at 6:20 AM, Yon Ko/연커/ : Solved! July 11, 2025 at 7:15 AM, 이민재 : @Hữu Thắng NC leader, I placed the oven plates with damaged or missing barcodes at VD AN. Please replace them. July 11, 2025 at 7:17 AM, Hữu Thắng : Okay . i will do it . July 11, 2025 at 7:28 AM, Karina : Hello, AGV #2 stopped near 5L/STK #16, please check July 11, 2025 at 7:59 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 46, CA:43 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 02, CA: 56 Post-Stock ➤ Stacking AN: 96, CA: 04 VD AN (Process Breakdown) UR: 36, Drying: 96, LR: 08 , Wait:24, OOS:08 VD CA (Process Breakdown) UR: 08, Drying: 88, LR: 04, Wait:00, OOS:24 Thank you July 11, 2025 at 8:14 AM, Sazzad Bhai SKon : @FA Please check the following UNKDUP carrier. MLA6073 (C1STKA72, 0101702) July 11, 2025 at 8:31 AM, Shakir (MCS) : @FA Please check NC Cathode reel RTV error. Thank you July 11, 2025 at 8:37 AM, Hữu Thắng : @MCS Could you please recheck UR VD CA 1-2/ 1-3 / 1-4 . Thank you July 11, 2025 at 8:38 AM, Shakir (MCS) : Checking July 11, 2025 at 8:38 AM, 이한웅(삼구) : please check NC Ca #1 Robot(08:17 stop) July 11, 2025 at 8:39 AM, QuangPhan : @MCS Could you please check LR half chamber VD AN 2-6. Thank you July 11, 2025 at 8:39 AM, Shakir (MCS) : Hello Good morning UR received successfully and Job initiated for all mentioned VD chambers ✅ Thank you July 11, 2025 at 8:39 AM, Shakir (MCS) : Checking July 11, 2025 at 8:40 AM, Hữu Thắng : @FA VD CA 1/9 the plate P02 is wrong position . Plz use agv to fix it . July 11, 2025 at 8:42 AM, Shakir (MCS) : Hello For VD 2-6, LR received successfully and job initiated ✅ AGV03&01 assigned and on the way Thank you July 11, 2025 at 8:44 AM, Hữu Thắng : @MCS Can you check UR these please 2/9 2/6 2/5 2/4 3/7 3/2 3/4 3/6 4/9 6/4 6/7 6/9 . Thank you July 11, 2025 at 8:44 AM, Shakir (MCS) : Checking July 11, 2025 at 8:50 AM, Yon Ko/연커/ : This message was deleted. July 11, 2025 at 8:50 AM, Yon Ko/연커/ : Fixed chamber is closed now. July 11, 2025 at 8:50 AM, Hữu Thắng : Thank you July 11, 2025 at 8:52 AM, Deepu Divan FA-Eng : @Shakir (MCS) could you please update the available lot quantity July 11, 2025 at 8:55 AM, Shakir (MCS) : For VD CA chamber 2-9,2-6,2-5,2-4,3-6,3-4 UR received successfully and job initiated ✅ 3-7, 3-2, 4-9,6-7,6-9 UR not received, Please Press UR. 6-4 : Chamber empty&OOS Thank you July 11, 2025 at 8:55 AM, Shakir (MCS) : Checking July 11, 2025 at 9:00 AM, Hữu Thắng : i’ve pressed UR . Recheck please . Thank you July 11, 2025 at 9:01 AM, Shakir (MCS) : Sure, Checking July 11, 2025 at 9:03 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 52, CA:30 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 00, CA: 24 Post-Stock ➤ Stacking AN: 143, CA: 51 VD AN (Process Breakdown) UR: 00, Drying: 96, LR: 08 , Wait:44, OOS:08 VD CA (Process Breakdown) UR: 48, Drying: 112, LR: 08, Wait:00, OOS:20 Thank you July 11, 2025 at 9:06 AM, Shakir (MCS) : UR received successfully and job initiated. ✅ Waiting for AGV, currently all AGVs are busy Thank you July 11, 2025 at 9:11 AM, Hữu Thắng : Thank you thank you July 11, 2025 at 9:24 AM, Sazzad Bhai SKon : Notching anode agv 6 is in alarm. Auto select abnormal July 11, 2025 at 9:57 AM, QuangPhan : Hello! @FA @AGV . VD An 3-5 the plates was wrong position . Please use AGV to fix it . thank you! July 11, 2025 at 10:21 AM, Yon Ko/연커/ : Fixed. Closed July 11, 2025 at 10:29 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 55, CA:35 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 01, CA: 00 Post-Stock ➤ Stacking AN: 166, CA: 94 VD AN (Process Breakdown) UR: 00, Drying: 88, LR: 12 , Wait:76, OOS:08 VD CA (Process Breakdown) UR: 40, Drying: 100, LR: 44, Wait:08, OOS:20 Thank you July 11, 2025 at 11:15 AM, QuangPhan : @MCS Could you please check LR half chamber VD AN 2-3. Thank you July 11, 2025 at 11:15 AM, Shakir (MCS) : Checking July 11, 2025 at 11:17 AM, Shakir (MCS) : LR received for VD AN 2-3 currently we don't have enough Materials available in the warehouse. Thank you July 11, 2025 at 11:26 AM, Shakir (MCS) : @FA Please check C1STKA71_P22, Its OOS, Tray id loss. Thank you July 11, 2025 at 11:28 AM, Yon Ko/연커/ : working on it. July 11, 2025 at 11:40 AM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 59, CA:43 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 01, CA: 00 Post-Stock ➤ Stacking AN: 155, CA: 101 VD AN (Process Breakdown) UR: 00, Drying: 96, LR: 08, Wait:68, OOS:08 VD CA (Process Breakdown) UR: 28, Drying: 96, LR: 36, Wait:32, OOS:20 Thank you July 11, 2025 at 11:42 AM, 이한웅(삼구) : VD An 5-5(#41) 안착 불량입니다. AGV로 재안착 부탁드립니다. July 11, 2025 at 11:43 AM, MCS/RTD System : @FA Please check C1STKC72_P21 there is Run Time over error. Thank you July 11, 2025 at 11:57 AM, Khaliun/Ivancsa FA : Solved July 11, 2025 at 12:11 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 58, CA:48 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 02, CA: 01 Post-Stock ➤ Stacking AN: 148, CA: 116 VD AN (Process Breakdown) UR: 04, Drying: 96, LR: 08, Wait:52, OOS:08 VD CA (Process Breakdown) UR: 00, Drying: 112, LR: 44, Wait:36, OOS:20 Thank you July 11, 2025 at 1:24 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 43, CA:46 Pre-Stk ➤ Notching AN: 00, CA:00 Pre-Stk ➤ VD AN: 03, CA: 03 Post-Stock ➤ Stacking AN: 167, CA: 108 VD AN (Process Breakdown) UR: 00, Drying: 100, LR: 00, Wait:72, OOS:08 VD CA (Process Breakdown) UR: 00, Drying: 156, LR: 08, Wait:20, OOS:20 Thank you July 11, 2025 at 1:27 PM, KIM SEYEON [김세연]_FA : @심재훈 피엠님 지금부터 NC AN의 다관절로봇 순차적 점검하겠습니다. July 11, 2025 at 1:29 PM, 김동섭 : CA VD 6-2 우측하단 L 플레이트 감지센서 불량입니다. 교체 부탁드립니다. July 11, 2025 at 1:30 PM, Sazzad Bhai SKon : @FA Please check the UNKDUP plate. MLC2154(C1STC72, 0100601) July 11, 2025 at 1:35 PM, QuangPhan : @FA NC AN AGV #5 error. Thanks July 11, 2025 at 1:36 PM, Khaliun/Ivancsa FA : Solved July 11, 2025 at 2:05 PM, Hữu Thắng : @MCS Could you please check RTV NC CA . We didn’t reel for a while July 11, 2025 at 2:06 PM, Shakir (MCS) : Checking July 11, 2025 at 2:08 PM, Shakir (MCS) : @FA Please check CA reel RTV is not moving, Reel supply stopped. Thank you July 11, 2025 at 2:13 PM, Shakir (MCS) : Since 13:43, reel LTC0046 on RTV not unloading on M10. MCS side everything good. ✅ Please check July 11, 2025 at 2:19 PM, MCS/RTD System : @Lajos Gábor F.A. please check July 11, 2025 at 2:21 PM, Shakir (MCS) : @FA Please check C1STKC72_C02 there is SCP Main Power CP Trip. Thank you July 11, 2025 at 2:24 PM, Usukhuu /ivancsa FA : @FA Tech check Nc CA AGV6 Check pls July 11, 2025 at 2:27 PM, Shakir (MCS) : Its moving now with magazine MC1097 NC CA AGV06 July 11, 2025 at 2:35 PM, Usukhuu /ivancsa FA : it was making the same mistake over and over agian July 11, 2025 at 2:38 PM, Shakir (MCS) : Checking July 11, 2025 at 2:44 PM, 이한웅(삼구) : NC Ca RTV 확인 부탁드립니다. July 11, 2025 at 2:45 PM, Shakir (MCS) : Yes, I check AGV06 causing same error from 14:03 to 14:16 ‘POS CONT POS ERR’ many times with same magazine MC6237. But after that AGV06 working normal with different magazine LR&UR. Monitoring further. Thank you July 11, 2025 at 2:47 PM, Shakir (MCS) : @FA still RTV not moving since 1 hour, from 13:43. Please check July 11, 2025 at 2:48 PM, Shakir (MCS) : Now RTV started to deliver reel ✅ Thank you July 11, 2025 at 3:49 PM, Shakir (MCS) : @Fa Please check E0STKC51 cranes not moving. Thank you July 11, 2025 at 4:33 PM, Shakir (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 38, CA:42 Pre-Stk ➤ Notching AN: 35, CA:14 Pre-Stk ➤ VD AN: 00, CA: 03 Post-Stock ➤ Stacking AN: 131, CA: 89 VD AN (Process Breakdown) UR: 04, Drying: 88, LR: 04, Wait:84, OOS:08 VD CA (Process Breakdown) UR: 00, Drying: 136, LR: 24, Wait:20, OOS:20 Thank you July 11, 2025 at 4:36 PM, 김희래 : 바코드 불량 매거진 MP Port에 있습니다. 확인 부탁드립니다. July 11, 2025 at 4:36 PM, 김희래 : 음극 노칭입니다. July 11, 2025 at 4:43 PM, 이한웅(삼구) : 네 교체하겠습니다. July 11, 2025 at 4:45 PM, QuangPhan : @MCS Could you please check VD AN 6-1. UR 3 plates, 1 plate no UR. PO3: MLA 6097 Thank you July 11, 2025 at 4:47 PM, Shakir (MCS) : Checking July 11, 2025 at 4:50 PM, Shakir (MCS) : UR failed for MLA6097, there is carrier id read failed. I will send plate to post VD STK. Thank you July 11, 2025 at 4:52 PM, Shakir (MCS) : Job initiated successfully and AGV04 assigned ✅ On the way Thank you July 11, 2025 at 4:56 PM, QuangPhan : Thank you so much! July 11, 2025 at 4:58 PM, Shakir (MCS) : You’re welcome July 11, 2025 at 5:14 PM, QuangPhan : Hello! @FA @AGV . VD An 1-8 the plates was wrong position . Please use AGV to fix it . thank you! July 11, 2025 at 6:03 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0):- Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): GF: Kovács Szabolcs, Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 11, 2025 at 6:46 PM, Oláh András : Photo July 11, 2025 at 7:20 PM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 23 , CA:10 Pre-Stk ➤ Notching AN: 29, CA:23 Pre-Stk ➤ VD AN: 03 , CA: 17 Post-Stock ➤ Stacking AN: 124 , CA: 29 VD CA (Process Breakdown) UR: 00, Drying: 104. LR: 00, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 09, Drying: 96, LR: 22 , Wait:79, OOS:08 July 11, 2025 at 7:39 PM, 김지수PM(Gyuri)_FA : @FA Please check E0CNVC52 RTV > not moving thanks! July 11, 2025 at 7:49 PM, Szabolcs : Checking July 11, 2025 at 7:50 PM, Szabolcs : Done July 11, 2025 at 7:56 PM, 김지수PM(Gyuri)_FA : Thanks a lot! July 11, 2025 at 8:00 PM, 김지수PM(Gyuri)_FA : @manufacturing Data is remaining on the M02 manual port please let me know whether there is carrier on that port July 11, 2025 at 8:01 PM, Anastasiia : This message was deleted. July 11, 2025 at 8:01 PM, 김지수PM(Gyuri)_FA : Before removing the data on M02, plates cannot be input through M02. Thanks July 11, 2025 at 8:01 PM, Anastasiia : This message was deleted. July 11, 2025 at 8:53 PM, 김지수PM(Gyuri)_FA : @제조 AN VD 6-1 P03센서 17시 넘어서 조치한 이력이 있을까요? 17시 이전까지 건조 후, 언로딩 전 P03에서 로드컴플리트 신호가 지속적으로 올라왔습니다 > 자동반송 불가 July 11, 2025 at 8:54 PM, 김지수PM(Gyuri)_FA : @이도형 (Lee) 해당 건, 조치 이력이 있을까요? July 11, 2025 at 9:02 PM, 이도형 (Lee) : 확인 후 말씀드리겠습니다. July 11, 2025 at 9:03 PM, 김지수PM(Gyuri)_FA : 네, 감사합니다. July 11, 2025 at 9:17 PM, Dániel Hufnágel : @Péti Gábor @Ivan Kasian Sl 5L 🥹 Stacking C/V-n a P07 es portot ideiglenes megállítjuk karbantartás véget 21:30 tól! Első sorban 5ös sor katód anyag ellátását fogja érinteni, és megközelítőleg 22:30-ig kész lesz! @VK (mcs) Good evening! Can you please stop for maintenance C1CNV072 P07 from 21:30? I will inform you as soon as you can turn it back! Thank you, July 11, 2025 at 9:20 PM, VK (mcs) : Sure, I will change it to OoS. July 11, 2025 at 9:58 PM, 이도형 (Lee) : @FA VD An #7 AGV is stopped. Please check. July 11, 2025 at 9:59 PM, 김지수PM(Gyuri)_FA : 7호기 트랜스퍼링 중이였고 현재 정상가동 확인했습니다. July 11, 2025 at 9:59 PM, Dániel Hufnágel : @VK (mcs) we finished can you turn back P07 port! Thank you! July 11, 2025 at 10:00 PM, Dániel Hufnágel : @Péti Gábor @Ivan Kasian Sl 5L 🥹 Végeztünk, köszönjük a megértést! July 11, 2025 at 10:01 PM, VK (mcs) : Status returned to normal. July 11, 2025 at 10:04 PM, 김지수PM(Gyuri)_FA : @fa All of M ports mc suddenly powered off (E0CNVC52) July 11, 2025 at 10:16 PM, 이도형 (Lee) : 조치 이력 없습니다. 테크니션 점검 요청 했습니다. 만약 테크니션 조치 미흡시 주간에 한국진공 점검 요청 하겠습니다. July 11, 2025 at 10:21 PM, 김지수PM(Gyuri)_FA : 네, 감사합니다. July 11, 2025 at 10:33 PM, Dariimaa/다리마/Ivancsa : @MCS NC AN AGV#6 idle. Please check Thank you! July 11, 2025 at 10:34 PM, Elena SL : Hello. 👋 please check AGV #1 near line 4 ST. thank you July 11, 2025 at 10:35 PM, Elena SL : @FA July 11, 2025 at 10:35 PM, VK (mcs) : Done July 11, 2025 at 11:20 PM, 이도형 (Lee) : @FA NC An RTV is stopped. Please check. July 11, 2025 at 11:28 PM, N.Zoli F.A. : Solved July 11, 2025 at 11:33 PM, VK (mcs) : @FA Are you still working on cathode reel conveyor C52? July 11, 2025 at 11:34 PM, 김지수PM(Gyuri)_FA : FYI, There is problem with C52 July 11, 2025 at 11:35 PM, VK (mcs) : Thanks for information July 12, 2025 at 12:27 AM July 12, 2025 at 12:27 AM, 조범희 : This message was deleted. July 12, 2025 at 12:27 AM, 조범희 : @VK (mcs) Please check Thank you! July 12, 2025 at 12:36 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 54 , CA:35 Pre-Stk ➤ Notching AN: 27, CA:00 Pre-Stk ➤ VD AN: 01 , CA: 02 Post-Stock ➤ Stacking AN: 116 , CA: 86 VD CA (Process Breakdown) UR: 08, Drying: 136, LR: 10, Wait:12, OOS:24 VD AN (Process Breakdown) UR: 08, Drying: 96, LR: 14 , Wait:81, OOS:08 July 12, 2025 at 12:39 AM, 은향(OH EUN HYANG) : Gfc NC Robot #2 Operation MGZ Decet Sensor err Hungary Technician, please! July 12, 2025 at 1:33 AM, Ivan Kasian Sl 5L 🥹 : @fa check please agv#9 near line 5.15 stack Thank you so much July 12, 2025 at 1:49 AM, 이도형 (Lee) : This message was deleted. July 12, 2025 at 1:56 AM, 김지수PM(Gyuri)_FA : @fa Please chexk c1cnv072 thanks July 12, 2025 at 1:57 AM, 김지수PM(Gyuri)_FA : Please change the manual and then auto mode again please July 12, 2025 at 1:59 AM, 김지수PM(Gyuri)_FA : Done July 12, 2025 at 2:00 AM, 이도형 (Lee) : @FA NC An #5 AGV ERROR. Please check. July 12, 2025 at 2:11 AM, 김지수PM(Gyuri)_FA : @fa Please check c1stka72 July 12, 2025 at 2:14 AM, Kaniz / Ivancsa FA : Agv no 7 has issues in CA STK July 12, 2025 at 2:16 AM, Kaniz / Ivancsa FA : Please check July 12, 2025 at 2:41 AM, 김지수PM(Gyuri)_FA : C01 is still remote mode July 12, 2025 at 2:44 AM, 김지수PM(Gyuri)_FA : @Selem /Ivancsa FA please check c1cnv072 thanks July 12, 2025 at 2:56 AM, Zulaa/졸라/Ivancsa FA : Done July 12, 2025 at 2:57 AM, 김지수PM(Gyuri)_FA : Thanks!! July 12, 2025 at 3:03 AM, 김지수PM(Gyuri)_FA : @fa Please check LTA0564 on E0CNVA52 > not moving July 12, 2025 at 3:19 AM, 김지수PM(Gyuri)_FA : E0CNVA52_M09 July 12, 2025 at 3:29 AM, 김지수PM(Gyuri)_FA : @VK (mcs) Could you please check reason why the destination of MLC4133 is different between mcs and CCS? July 12, 2025 at 3:36 AM, 김지수PM(Gyuri)_FA : @Selem /Ivancsa FA Could you please check c1cnv072? July 12, 2025 at 3:38 AM, VK (mcs) : Job terminated at 22:09 And manual job created to (16048) July 12, 2025 at 3:39 AM, 김지수PM(Gyuri)_FA : Thanks! July 12, 2025 at 3:42 AM, VK (mcs) : But as I see, this carrier is not moving to this unit for a while. Can you please cancel it and send it back to STK. July 12, 2025 at 4:08 AM, 은향(OH EUN HYANG) : Please check the GFA circulation conveyor NG diveter belt. hungarian technology July 12, 2025 at 4:10 AM, Nguyen Huy : @FA AGV #2 error near 2-3 NC CA, pls check July 12, 2025 at 4:46 AM, 김지수PM(Gyuri)_FA : Vk, could you please share the next lot? July 12, 2025 at 4:47 AM, Dániel Hufnágel : @VK (mcs) July 12, 2025 at 4:52 AM, VK (mcs) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 77 , CA:60 Pre-Stk ➤ Notching AN: 22, CA:00 Pre-Stk ➤ VD AN: 00 , CA: 38 Post-Stock ➤ Stacking AN: 114 , CA: 36 VD CA (Process Breakdown) UR: 46, Drying: 84 , LR: 20, Wait:00, OOS:20 VD AN (Process Breakdown) UR: 04, Drying: 128, LR: 08 , Wait:55, OOS:08 July 12, 2025 at 4:56 AM, 이도형 (Lee) : @MCS , @FA Please load the full magazine into the AGV for VD An 6-1 half chamber P03 and P04. July 12, 2025 at 5:00 AM, 이도형 (Lee) : @FA VD An #6 AGV is stopped. Please check. July 12, 2025 at 5:04 AM, Zulaa/졸라/Ivancsa FA : Done July 12, 2025 at 5:07 AM, 김지수PM(Gyuri)_FA : 6-1 P03에서도 16:04분 건조 후 언로딩 전 load complete 신호가 20번 올라왔습니다. 해당 P03포트 센서점검이 필요해보입니다. (실제 이송잡이 없었으나 P03 P04에서 2:03~2:58까지 총 4회 언로트컴플리트 보고가 올라왔습니다) July 12, 2025 at 5:10 AM, 이도형 (Lee) : 테크니션 점검 미흡 합니다. 한국진공 주간 점검 요청했습니다. July 12, 2025 at 5:11 AM, 김지수PM(Gyuri)_FA : 네, 감사합니다! July 12, 2025 at 5:17 AM, 이도형 (Lee) : @MCS , @FA Please load the full magazine into the AGV for VD An 5-2 half chamber P03 and P04. July 12, 2025 at 5:25 AM, 김지수PM(Gyuri)_FA : LR올려주실 수 있으실까요? July 12, 2025 at 5:25 AM, 김지수PM(Gyuri)_FA : 현재 전창고에서 반송가능한 자재가 없습니다. July 12, 2025 at 5:27 AM, 이도형 (Lee) : LOADING START 진행했습니다. 05:09, 05:16, 05:26 July 12, 2025 at 5:28 AM, 이도형 (Lee) : 알겠습니다. 자재있으면 우선순위로 해주십시요 July 12, 2025 at 5:29 AM, VK (mcs) : The reason of half chamber is: after LR, RTD received unload complete report for port 3z We received LR several times, Material will be delivered base on prioity. When they are available. Please do not apply LR. Thx July 12, 2025 at 5:31 AM, Dariimaa/다리마/Ivancsa : @MCS VD CA AGV#7 idle. Please check Thank you! July 12, 2025 at 5:33 AM, VK (mcs) : Done July 12, 2025 at 5:57 AM, Hữu Thắng : @MCS Good morning . Could you please tell me is there any error with RTV GF NC CA ? We are running out of reels . Thank you July 12, 2025 at 6:00 AM, Farkas Tamàs : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 1 SL Beteg: 0 Szabadságon: 1 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (4) Marsi Gábor Simon Attila Skwarek Tibor Viczai Tamás ———————————— Assembly 1F(2) Fabricius Gergő Nagy Tamás ———————————— Assembly GF(3) Gégény Dávid Győri József Lajos Gábor ———————————— Formation/Modul(3) Csuti Zoli Döme György Harasztia Zoli July 12, 2025 at 6:11 AM, 이한웅(삼구) : Ca VD 6-6(#51) 플레이트 3개만 있는데 확인 부탁드립니다. July 12, 2025 at 6:15 AM, 이한웅(삼구) : Ca VD 3-5(#23) 플레이트 1개만 있습니다. 확인 부탁드립니다. July 12, 2025 at 6:16 AM, 이한웅(삼구) : Ca 4-3(#30) 동일 합니다. July 12, 2025 at 6:16 AM, 이한웅(삼구) : Ca 2-3(#12) 동일 합니다. July 12, 2025 at 6:18 AM, Hữu Thắng : This message was deleted. July 12, 2025 at 6:18 AM, 김지수PM(Gyuri)_FA : 건조후 언로딩 전, P02 P03 P04에서 로드컴플리트가 올라와서 P01에서만 화물(MLC3128)을 떠서 후창고로 반송이되었습니다. July 12, 2025 at 6:19 AM, 이한웅(삼구) : Ca 1-5(#5) 플레이트 4개 전부 있는데 우측 하단 플레이트 아이디 및 바코드 정보 안넘어 왔습니다. 이것도 확인 부탁드립니다 July 12, 2025 at 6:19 AM, 이한웅(삼구) : 이거 실제 안착 불량이나 이런거는 아닌가요? July 12, 2025 at 6:20 AM, 이한웅(삼구) : 동시 다발적으로 갑자기 여러 설비에서 발생하는데 현장 확인도 부탁드립니다. July 12, 2025 at 6:20 AM, 김지수PM(Gyuri)_FA : 건조후 언로딩 전, P03에서 load complete 신호가 올라와서 AGV가 124에서만 떠갔습니다. July 12, 2025 at 6:21 AM, 김지수PM(Gyuri)_FA : 넵, VD 양극 현장확인 요청하겠습니다. July 12, 2025 at 6:22 AM, Hữu Thắng : @MCS VD CA 5/1 only 1 plate. plz check it July 12, 2025 at 6:22 AM, 이한웅(삼구) : 넵 감사합니다. 저희도 챔버 확인해서 센서 확인하겠습니다. July 12, 2025 at 6:23 AM, 이한웅(삼구) : please come ca vd 2-3 July 12, 2025 at 6:24 AM, Shahbaz 샤바즈 MCS/RTD : The carrier Id for P02 was null when there was UR so it was not returned. July 12, 2025 at 6:25 AM, Shahbaz 샤바즈 MCS/RTD : Same for VD CA 2-3, the carrier id for P02 was null. July 12, 2025 at 6:25 AM, QuangPhan : Good morning! @MCS VD AN 6-1 (#46) Please check LR half chamber. PO3, PO4 empty. Thanks. July 12, 2025 at 6:27 AM, Hữu Thắng : @MCS Good morning . Can you plz check UR those chamber ! VD CA 6/7 6/2 . 5/8 - 3/6 2/6 2/2 1/9 1/8 1/7 1/4 1/3 . Thank you July 12, 2025 at 6:27 AM, Shahbaz 샤바즈 MCS/RTD : Good morning , LR is up for the half chamber and waiting for available lots. July 12, 2025 at 6:30 AM, QuangPhan : Good morning! @FA NC AN AGV #1 error. Thanks July 12, 2025 at 6:32 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! UR received for: 3-6, 1-4 No UR received for: 6-7, 6-2, 5-8, 2-6, 1-9, 1-8, 1-7 July 12, 2025 at 6:32 AM, Gégény Dávid : Done. waiting for the NC machine. July 12, 2025 at 6:33 AM, Shahbaz 샤바즈 MCS/RTD : @Hữu Thắng July 12, 2025 at 6:40 AM, Hữu Thắng : Recheck plz . July 12, 2025 at 6:44 AM, Shahbaz 샤바즈 MCS/RTD : Now, URs have been received from all the above-mentioned VDs, and jobs have been created. July 12, 2025 at 6:55 AM, Hữu Thắng : @FA NC CA agv4 errror . Plz check July 12, 2025 at 6:55 AM, Khaliun/Ivancsa FA : going. July 12, 2025 at 6:55 AM, Gégény Dávid : On way July 12, 2025 at 7:17 AM, KIM SEYEON [김세연]_FA : @Sazzad Bhai SKon please share available lot July 12, 2025 at 7:22 AM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- Pre-Stk ➤ Notching AN: 24, CA:00 Pre-Stk ➤ VD AN: 02 , CA: 17 Post-Stock ➤ Stacking AN: 48, CA: 68 VD CA (Process Breakdown) UR: 38, Drying: 52, LR: 72, Wait:00, OOS:12 VD AN (Process Breakdown) UR: 00, Drying: 124, LR: 12 , Wait:02, OOS:08 July 12, 2025 at 7:26 AM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 65, CA:54 Pre-Stk ➤ Notching AN: 24, CA:00 Pre-Stk ➤ VD AN: 02 , CA: 17 Post-Stock ➤ Stacking AN: 48, CA: 68 VD CA (Process Breakdown) UR: 38, Drying: 52, LR: 72, Wait:00, OOS:12 VD AN (Process Breakdown) UR: 00, Drying: 124, LR: 12 , Wait:02, OOS:08 July 12, 2025 at 7:31 AM, Usukhuu /ivancsa FA : @FA tech please check AGV#5 GF NC AN July 12, 2025 at 7:31 AM, Usukhuu /ivancsa FA : it is making same mistake over and over again July 12, 2025 at 7:33 AM, KIM SEYEON [김세연]_FA : will check what is the error name? July 12, 2025 at 7:34 AM, Usukhuu /ivancsa FA : FORK1 ENC VAL ABNORMAL July 12, 2025 at 7:34 AM, Lajos Gábor F.A. : Done July 12, 2025 at 7:55 AM, Hữu Thắng : @MCS RTV NC CA reel is not moving . Can you please check what happen , thanks July 12, 2025 at 8:01 AM, Shahbaz 샤바즈 MCS/RTD : @FA LTC1935 has a transfer command to E0CNVC52_M10 but it is not moving from RTV for long time. Please check. Thank you July 12, 2025 at 8:09 AM, Hữu Thắng : @FA NC CA agv#4 errror . Plz check p July 12, 2025 at 8:10 AM, Győri József F.A : Done July 12, 2025 at 8:18 AM, QuangPhan : @MCS VD AN 6-1 Sensor error. Please send plates warehouse, the technicians repair machine start. Thank you. July 12, 2025 at 8:20 AM, Shahbaz 샤바즈 MCS/RTD : @Hữu Thắng please send them back to the warehouse. Thank you July 12, 2025 at 8:20 AM, QuangPhan : @FA NC AN Robot #3 error. Thanks July 12, 2025 at 8:23 AM, Győri József F.A : Done July 12, 2025 at 8:38 AM, 이한웅(삼구) : An VD 1-2(#2) 플레이트 안착 불량입니다. AGV로 재안착 부탁드립니다ㅡ July 12, 2025 at 8:42 AM, Zaya/ivancsa FA : done July 12, 2025 at 8:42 AM, QuangPhan : @MCS @FA VD AN 5-2 Sensor error. Please send plates warehouse, the technicians repair machine start. Thank you. July 12, 2025 at 8:43 AM, Hữu Thắng : Can you plz share it again . Thank you July 12, 2025 at 8:48 AM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 50, CA:23 Pre-Stk ➤ Notching AN: 18, CA:00 Pre-Stk ➤ VD AN: 01, CA: 19 Post-Stock ➤ Stacking AN: 58, CA: 66 VD CA (Process Breakdown) UR: 00, Drying: 80, LR: 46, Wait:00, OOS:12 VD AN (Process Breakdown) UR: 60, Drying: 84, LR: 32 , Wait:08, OOS:08 July 12, 2025 at 8:50 AM, 이한웅(삼구) : 플레이트 투입 간 AGV 에러 발생 후 설비에 정보가 안넘어 온거 같습니다. 확인 부탁드립니다. 그리고 후창고로 자재 반송 부탁드립니다. July 12, 2025 at 9:03 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Zaya/ivancsa FA Carrier ID was null when there was a UR. VD CA 2-3 P02 VD CA 3-5 P03 VD CA 4-3 P02/P04 VD CA 6-6 P02/P03/P04 Please return them to the warehouse. Thank you. July 12, 2025 at 9:13 AM, Zaya/ivancsa FA : Chamber is empty now. July 12, 2025 at 9:14 AM, Shahbaz 샤바즈 MCS/RTD : Thank you. July 12, 2025 at 9:19 AM, 이한웅(삼구) : thank you July 12, 2025 at 9:23 AM, 이한웅(삼구) : Ca 후창고 전일 야간에 Empty 플레이트 7개 생겼는데 확인 후 전창고 투입 부탁드립니다. July 12, 2025 at 9:26 AM, Baek Hojong(백호종)FA : @Farkas Tamàs The notching cathode mcp panel fan is not spinning, so I have to keep the door open. Please pass this on to the technicians. July 12, 2025 at 9:34 AM, Farkas Tamàs : Ok July 12, 2025 at 9:39 AM, Zaya/ivancsa FA : All materials returned to the warehouse July 12, 2025 at 9:41 AM, Zaya/ivancsa FA : Done July 12, 2025 at 9:46 AM, 원재 : This message was deleted. July 12, 2025 at 9:46 AM, 이한웅(삼구) : 이거는 여기 아닙니다 July 12, 2025 at 10:04 AM, 이한웅(삼구) : An VD 1-4 좌측 상단 안착불량, AGV 재안착 부탁드립니다ㅡ July 12, 2025 at 10:21 AM, Usukhuu /ivancsa FA : done July 12, 2025 at 10:22 AM, 이한웅(삼구) : thank you! July 12, 2025 at 10:51 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot July 12, 2025 at 10:55 AM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 37, CA:32 Pre-Stk ➤ Notching AN: 32, CA:00 Pre-Stk ➤ VD AN: 01, CA: 08 Post-Stock ➤ Stacking AN: 113, CA: 75 VD CA (Process Breakdown) UR: 00, Drying: 144, LR: 46, Wait:00, OOS:16 VD AN (Process Breakdown) UR: 12, Drying: 64, LR: 36 , Wait:56, OOS:08 July 12, 2025 at 10:55 AM, Usukhuu /ivancsa FA : @mcs please cancel the job for AGV#9 GF VC CA chamber 2-3 is closed July 12, 2025 at 10:56 AM, Shahbaz 샤바즈 MCS/RTD : Done July 12, 2025 at 11:00 AM, Usukhuu /ivancsa FA : And assign to the other port pls, it has plates inside it July 12, 2025 at 11:00 AM, Shahbaz 샤바즈 MCS/RTD : Please sent it back to the warehouse. July 12, 2025 at 11:16 AM, QuangPhan : Hello! @FA @AGV . VD An 3-5 the plates was wrong position . Please use AGV to fix it . thank you! July 12, 2025 at 11:23 AM, Zaya/ivancsa FA : done, chamber closed July 12, 2025 at 11:30 AM, Zaya/ivancsa FA : @Shahbaz 샤바즈 MCS/RTD Could you pls check CNV_P23? There is a empty magazine July 12, 2025 at 11:37 AM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the plate ID? The port is empty in MCS. July 12, 2025 at 11:38 AM, Zaya/ivancsa FA : MLA0006 July 12, 2025 at 11:42 AM, Pavel : @GF Hello everyone, please tell me what the problem is, poor supply of anode material on lines 1-3 Thanks in advance July 12, 2025 at 11:43 AM, 이한웅(삼구) : An NC #8 AGV 기둥 감지하여 정지중입니다. July 12, 2025 at 11:44 AM, 이한웅(삼구) : An NC 3-2 풀 매거진 배출 지연으로 30분째 비가동 중입니다... July 12, 2025 at 11:45 AM, Gégény Dávid : Done July 12, 2025 at 11:45 AM, QuangPhan : Dear FA, There were two plates with duplicate barcodes (MLA6073). We have replaced one of the plates with a new barcode (MLA4301). Thank you! July 12, 2025 at 11:48 AM, Shahbaz 샤바즈 MCS/RTD : Is it removed? July 12, 2025 at 11:48 AM, Zaya/ivancsa FA : No July 12, 2025 at 12:13 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 26, CA:38 Pre-Stk ➤ Notching AN: 26, CA:00 Pre-Stk ➤ VD AN: 02, CA: 27 Post-Stock ➤ Stacking AN: 123, CA: 60 VD CA (Process Breakdown) UR: 10, Drying: 176, LR: 08, Wait:04, OOS:16 VD AN (Process Breakdown) UR: 00, Drying: 100, LR: 16 , Wait:64, OOS:08 July 12, 2025 at 12:19 PM, Usukhuu /ivancsa FA : @FA tech GF VD AN 72 crane is stack July 12, 2025 at 12:19 PM, Gégény Dávid : On way July 12, 2025 at 12:54 PM, Pavel : I still haven't received an answer as to why the material isn't being delivered. July 12, 2025 at 1:02 PM, Shahbaz 샤바즈 MCS/RTD : @FA @Zaya/ivancsa FA Currently, there are plates at C1STKC71_P13/P14, but the destination machine VD CA 2-3 is OOS. This is delaying delivery to other machines as well. Please return them to the warehouse so that other transfers are not affected. Thank you. July 12, 2025 at 1:14 PM, Zaya/ivancsa FA : Done July 12, 2025 at 1:24 PM, QuangPhan : @FA NC AN Robot #3 error. Thanks July 12, 2025 at 1:31 PM, Győri József F.A : Done July 12, 2025 at 1:35 PM, Pavel : @MCS July 12, 2025 at 1:38 PM, Shahbaz 샤바즈 MCS/RTD : Currently the delivery seems to be normal. I am monitoring it. July 12, 2025 at 1:53 PM, 이한웅(삼구) : 전창고에 Full 자재인데 EmptyEmpty 상태인게 있습니다. 확인 부탁드립니다. MLA6187 MLA0149 July 12, 2025 at 2:02 PM, QuangPhan : @FA Please send plates warehouse. Thank you! July 12, 2025 at 2:04 PM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA please transfer the plates from VD An 6-1. Thanks July 12, 2025 at 2:10 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check CNVC51 track 8052-53 INV Run time over error. Thanks July 12, 2025 at 2:10 PM, Gégény Dávid : On way July 12, 2025 at 2:13 PM, Gégény Dávid : Done July 12, 2025 at 2:15 PM, Zaya/ivancsa FA : Done July 12, 2025 at 2:19 PM, QuangPhan : Thank you so much! July 12, 2025 at 2:24 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 29, CA:30 Pre-Stk ➤ Notching AN: 38, CA:01 Pre-Stk ➤ VD AN: 02, CA: 02 Post-Stock ➤ Stacking AN: 83, CA: 62 VD CA (Process Breakdown) UR: 06, Drying: 120, LR: 36, Wait:00, OOS:16 VD AN (Process Breakdown) UR: 02, Drying: 152, LR: 08 , Wait:28, OOS:08 July 12, 2025 at 2:59 PM, Hữu Thắng : @FA VD CA AGV#7 stopped . Plz check July 12, 2025 at 3:16 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1CNV072 track 16158 Diverter Up error. Thank you. July 12, 2025 at 3:47 PM, 이한웅(삼구) : @KIM SEYEON [김세연]_FA @이주봉PM LEE JUBONG(FA) 안녕하세요. An NC 공매거진 투입 지연, 풀매거진 배출 지연으로 노칭 비가동 지속적으로 발생 중입니다. 전창고에도 공매거진 수량 점점 증가 중인데 수동 대응이 필요 할 거 같습니다..확인 부탁드리겠습니다. July 12, 2025 at 3:48 PM, KIM SEYEON [김세연]_FA : 네 알겠습니다. July 12, 2025 at 3:48 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD please share available lot July 12, 2025 at 3:48 PM, 이한웅(삼구) : 감사합니다! July 12, 2025 at 3:51 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 37, CA:35 Pre-Stk ➤ Notching AN: 45, CA:01 Pre-Stk ➤ VD AN: 01, CA: 19 Post-Stock ➤ Stacking AN: 68, CA: 55 VD CA (Process Breakdown) UR: 16, Drying: 124, LR: 24, Wait:00, OOS:16 VD AN (Process Breakdown) UR: 00, Drying: 132, LR: 10 , Wait:16, OOS:08 July 12, 2025 at 3:54 PM, QuangPhan : Hello! @FA @AGV . VD An 1-4 the plates was wrong position . Please use AGV to fix it . thank you! July 12, 2025 at 4:11 PM, Usukhuu /ivancsa FA : done July 12, 2025 at 4:51 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD MCS/RTD please share available lot July 12, 2025 at 4:55 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 32 CA: 25 Pre-Stk ➤ Notching AN: 27 CA: 00 Pre-Stk ➤ VD AN: 04 CA: 10 Post-Stock ➤ Stacking AN: 54 CA: 82 VD CA (Process Breakdown) UR: 00 Drying: 96 LR: 34 Wait: 00 OOS: 16 VD AN (Process Breakdown) UR: 34 Drying: 116 LR: 02 Wait: 04 OOS: 12 July 12, 2025 at 5:21 PM, Usukhuu /ivancsa FA : @mcs please check AGV#09 GF NC AN July 12, 2025 at 5:30 PM, 원재 : @MCS MLA0236 MLA6042 MLA6321 MLA6226 MLA4065 Please check if the Mgz plate is in hold status. July 12, 2025 at 5:30 PM, Mohammad Amir : Good evening, Sure checking! July 12, 2025 at 5:30 PM, Mohammad Amir : Checking. July 12, 2025 at 5:35 PM, Mohammad Amir : Good evening, Please transfer this magazine back to Pre VD warehouse manually,cause from MCS side command is not getting executed. Thank you very much! July 12, 2025 at 5:39 PM, Mohammad Amir : Dear Sir, We checked,These pallets are not on hold status from RTD side. Feel free to contact us again if you need any further information. Thank you very much! July 12, 2025 at 5:40 PM, 원재 : Thank you so much for checking! July 12, 2025 at 5:40 PM, Mohammad Amir : You are most welcome! July 12, 2025 at 5:55 PM, Pavel : @FA 2/1 AGV #3 stopped please check July 12, 2025 at 6:04 PM, KIM SEYEON [김세연]_FA : @Shahbaz 샤바즈 MCS/RTD MCS/RTD MCS/RTD please share available lot July 12, 2025 at 6:04 PM, Mohammad Amir : Good evening Sir, Sure, checking! Thank you very much! July 12, 2025 at 6:05 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:11/12 Overtime (0):- Sick (0): - Holiday (1): Kovács Szabolcs Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(4): GF: Nagy Zsolt, Zsurbej Zsolt 1F: Kasztel Balázs, Novák Zoltán Modul(2): Nagy Gábor, Martina Dávid July 12, 2025 at 6:05 PM, duzzaman Md (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 29 CA: 23 Pre-Stk ➤ Notching AN: 17 CA: 00 Pre-Stk ➤ VD AN: 01 CA: 06 Post-Stock ➤ Stacking AN: 93 CA: 80 VD CA (Process Breakdown) UR: 20 Drying: 120 LR: 16 Wait: 00 OOS: 16 VD AN (Process Breakdown) UR: 12 Drying: 104 LR: 24 Wait: 40 OOS: 12 Thank you! July 12, 2025 at 6:40 PM, Mohammad Amir : Good Evening @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 12, 2025 at 6:41 PM, Zsurbej Zsolt F.A. : Done July 12, 2025 at 6:42 PM, Mohammad Amir : Thank you very much! July 12, 2025 at 6:44 PM, Mohammad Amir : @Zsurbej Zsolt F.A. Please check C1STKA72_C01 there is Load Oversize error and it is blocking Anode stacking materials delivery. Please check the issue on priority. Thank you very much! July 12, 2025 at 6:51 PM, 이도형 (Lee) : @FA, @Mohammad Amir Please check VD An 1-1 half chamber on the 12th at 21:22. July 12, 2025 at 6:52 PM, Mohammad Amir : Good evening, We are checking! July 12, 2025 at 6:54 PM, duzzaman Md (MCS) : There's active UR and job. Due to ACS issue, it's getting assigned unassigned. July 12, 2025 at 6:54 PM, duzzaman Md (MCS) : @ACS Please check July 12, 2025 at 6:59 PM, Mohammad Amir : Good evening UR was successful but there was an issue from the ACS side that's why two plates were remained in the chamber now AGV#10 has successfully picked these carriers as well and on the way to Post VD STK. Afterwards we have currently Load request from VD AN 1-1 at 18:56 but unfortunately we don't have any material left in the warehouse as soon as materials will be available it will be delivered to VD AN 1-1. Thank you very much! July 12, 2025 at 7:12 PM, 김지수PM(Gyuri)_FA : @Zulaa/졸라/Ivancsa FA please check c1cnv072 16128 track July 12, 2025 at 7:14 PM, Mohammad Amir : Good Evening @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 12, 2025 at 7:16 PM, Mohammad Amir : This message was deleted. July 12, 2025 at 7:17 PM, Mohammad Amir : @FA Please take action on this ,it is blocking stacking materials delivery. Thank you very much! July 12, 2025 at 7:22 PM, Zulaa/졸라/Ivancsa FA : Done July 12, 2025 at 7:49 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 1-5 (P01/P02) ,cause there is half chamber situation cause we received Unload complete report after Load request. Thank you very much! July 12, 2025 at 7:52 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 6-9 (P01/P02) ,cause there is a half chamber situation . Thank you very much! July 12, 2025 at 8:00 PM, 이도형 (Lee) : @김지수PM(Gyuri)_FA PM님 노칭 5-3 AGV 공매거진 Out포트에 투입 충돌 발생했습니다 AGV #8 확인 부탁드립니다 July 12, 2025 at 8:01 PM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) 확인 좀 부탁드리겠습니다. July 12, 2025 at 8:01 PM, 이도형 (Lee) : Ca July 12, 2025 at 8:03 PM, 은향(OH EUN HYANG) : 풀매거진이 있는데 공매거진을 내려놓으려다 충돌났읍니다 July 12, 2025 at 8:04 PM, 은향(OH EUN HYANG) : 노칭작업자가 사진은 찍었읍니다 July 12, 2025 at 8:04 PM, 김지수PM(Gyuri)_FA : 넵, 명령 확인해보겠습니다. July 12, 2025 at 8:06 PM, Mohammad Amir : Good Evening @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 12, 2025 at 8:10 PM, 이도형 (Lee) : PM님 원인 파악 후 공유부탁드립니다. July 12, 2025 at 8:11 PM, 김지수PM(Gyuri)_FA : 5-3 P02에서 공매거진 픽업 잡 실행당시, AGV내 화물감지가 안되고있었습니다.(실제 화물은 존재) 원인 파악하는대로 공유드리겠습니다. July 12, 2025 at 8:11 PM, 김지수PM(Gyuri)_FA : . July 12, 2025 at 8:12 PM, 이도형 (Lee) : 풀매거진 전극에는 이상없습니다. 네. 감사합니다. July 12, 2025 at 8:17 PM, 이도형 (Lee) : @FA NC Ca RTV is stopped. Please check. July 12, 2025 at 8:18 PM, Mohammad Amir : Please check this issue still exists, CA reels delivery has completely stopped. Thank you very much! July 12, 2025 at 8:24 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 07 Pre-Stk ➤ Notching AN: 05 CA: 08 Pre-Stk ➤ VD AN: 00 CA: 04 Post-Stock ➤ Stacking AN: 109 CA: 84 VD CA (Process Breakdown) UR: 08 Drying: 88 LR: 00 Wait: 64 OOS: 12 VD AN (Process Breakdown) UR: 00 Drying: 132 LR: 08 Wait: 00 OOS: 16 Thank you very much! July 12, 2025 at 8:28 PM, 김지수PM(Gyuri)_FA : C0PVC020_P13에서 MC4565 > VC08 이송작업 시 AGV화물감지 센서 이상으로 인해, 19:53:56에 실제로 화물을 받았으나 화물감지를 하지 못했습니다. 현재는 정상적으로 감지가 되고있으나, 점검 요청하겠습니다. July 12, 2025 at 8:28 PM, 김지수PM(Gyuri)_FA : . July 12, 2025 at 8:31 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please increase the priority of 12003track (c1stka71_P21) July 12, 2025 at 8:31 PM, Mohammad Amir : Sure, working on it. July 12, 2025 at 8:34 PM, Dániel Hufnágel : @Péti Gábor @Mohammad Amir Sziasztok! 21:00 órakor karbantartás miatt GF Stacking Conveyort Anód oldalt megállítjuk előre tervezetten 22:30-ig! Első sorban stacking sor 1-2-3 fogja érinteni, viszont anód anyag hiány miatt érintheti a 4-5-6 os sort is! Köszönöm! July 12, 2025 at 8:35 PM, Mohammad Amir : Good evening Dániel, Thank you very much for the information! July 12, 2025 at 8:38 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 4plates out from c1cnv072 theM01 thanks July 12, 2025 at 8:39 PM, Mohammad Amir : @P.Bence A SSL @F.Péter A SL L10 @Ivan Chobitko Please take action on this,it is slowing down Stacking materials delivery. Thank you very much! July 12, 2025 at 8:39 PM, 김지수PM(Gyuri)_FA : @Elena SL @Ivan Kasian Sl 5L 🥹 July 12, 2025 at 8:44 PM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA Now Recovery CNV071(Anode) has been emptied so now I am making the priority to normal. I am monitoring if such a situation again comes I will take appropriate action. Thank you very much! July 12, 2025 at 8:44 PM, 김지수PM(Gyuri)_FA : Perfect thanks!!! July 12, 2025 at 8:45 PM, Mohammad Amir : You are most welcome! July 12, 2025 at 8:45 PM, Péti Gábor : @Tetiana SL/D @Yulya Kirsanova @Anastasiia !!!!!!! July 12, 2025 at 8:46 PM, Elena SL : Give me some time. I'm on my way. Thank July 12, 2025 at 8:53 PM, Ivan Chobitko : Please tell me which MGZ are not closed? Based on MES data, all are closed. July 12, 2025 at 8:53 PM, Mohammad Amir : Sure, checking! July 12, 2025 at 8:54 PM, 김지수PM(Gyuri)_FA : @은향(OH EUN HYANG) 현장에서 순환CNV 매뉴얼전환 과정에서 실수가. 있었던 듯 합니다. 확인 좀 부탁드리겠습니다. July 12, 2025 at 8:56 PM, Mohammad Amir : As I checked:- For MLA0102- Magazine MA5172 is not closed ,it is currently located at C1CNV072_M01. Feel free to ask me ,if you need further information. Thank you very much! July 12, 2025 at 8:57 PM, Ivan Chobitko : Thank you so much July 12, 2025 at 8:57 PM, Mohammad Amir : As I checked:- For MLA1073 Magazine MA1470 is not closed . Thank you very much! July 12, 2025 at 8:57 PM, Mohammad Amir : You are welcome! July 12, 2025 at 8:57 PM, 송태용(Song tae yong) : 현재 헝가리 테크니션들이 디버터 컨베이어 벨트 장력조절중에 있습니다 July 12, 2025 at 8:58 PM, 송태용(Song tae yong) : 완료 후 정보 맞춘고 설비 가동하겠습니다. July 12, 2025 at 8:58 PM, 김지수PM(Gyuri)_FA : 감사합니다! July 12, 2025 at 9:01 PM, Nguyen Huy : @FA AGV #3, #4, #10 are idling at Line 1 NC CA, pls check July 12, 2025 at 9:01 PM, Mohammad Amir : Checking July 12, 2025 at 9:01 PM, Mohammad Amir : Good Evening @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 12, 2025 at 9:03 PM, 송태용(Song tae yong) : 컨베이어 벨트 교체중입니다. July 12, 2025 at 9:03 PM, Mohammad Amir : @FA Please check NC CA AGV#10 it is not moving and blocking AGV#3&#4 everything is good from MCS RTD side. ✅ Thank you very much! July 12, 2025 at 9:07 PM, Mohammad Amir : @Zulaa/졸라/Ivancsa FA Please check this issue on priority,it is delaying tasks. Thank you very much! July 12, 2025 at 9:08 PM, Elena SL : Done ☑️ July 12, 2025 at 9:08 PM, 김지수PM(Gyuri)_FA : Thanks! July 12, 2025 at 9:12 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check this issue still exists,RTV is still is in error ,and because of this CA reels delivery has completely stopped. Thank you very much! July 12, 2025 at 9:23 PM, Tasnim / Ivancsa FA : Please check NC AN AGV#3 it is not moving.. July 12, 2025 at 9:24 PM, Mohammad Amir : Checking July 12, 2025 at 9:27 PM, Mohammad Amir : It has started to move ✅. Thank you very much! July 12, 2025 at 9:31 PM, Dániel Hufnágel : Now its working July 12, 2025 at 9:31 PM, Mohammad Amir : Thank you very much! July 12, 2025 at 9:47 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 1-5 (P01/P02) ,cause there is half chamber situation cause we received Unload complete report after Load request. Thank you very much! July 12, 2025 at 9:48 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 6-9 (P01/P02) ,cause there is a half chamber situation . Thank you very much! July 12, 2025 at 9:57 PM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 25 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 01 CA: 03 Post-Stock ➤ Stacking AN: 125 CA: 95 VD CA (Process Breakdown) UR: 00 Drying: 136 LR: 16 Wait: 08 OOS: 16 VD AN (Process Breakdown) UR: 00 Drying: 124 LR: 24 Wait: 52 OOS: 12 Thank you very much! July 12, 2025 at 10:04 PM, Dániel Hufnágel : @Péti Gábor @Mohammad Amir @duzzaman Md (MCS) An72 Conveyor karbantartással elkészültünk, köszönjük a türelmet! July 12, 2025 at 10:17 PM, Mohammad Amir : @Manufacturing @Elena SL Please check and remove 1+1 carrier from C1CNV072_M04. Thank you very much! July 12, 2025 at 10:24 PM, Mohammad Amir : For your kind information @Elena SL :- For MLC4163 located at M01_C1CNV072,the issue is Magazine MC6397 is not closed. And For MLA6227,(waiting to go to M01):- The issue is Magazine MA1196 is not closed. Thank you very much! July 12, 2025 at 10:28 PM, 김지수PM(Gyuri)_FA : @manufacturing If the empty tray arrived at manual outport, that means even if it looks empty but still remaining as full status in data July 12, 2025 at 10:32 PM, Mohammad Amir : @FA @Zulaa/졸라/Ivancsa FA Please check C1CNV072_P35. Thank you very much! July 12, 2025 at 10:36 PM, Mohammad Amir : As I checked there is carrier located in CCS at 16155(P35) MLA0225 but MCS there is no carrier please confirm is this carrier actually exists. Please check as this issue is blocking satcking materials delivery. Thank you very much! July 12, 2025 at 10:37 PM, Mohammad Amir : Now, Issue has been resolved ✅. Carriers have started to move. Thank you very much @Zaya/ivancsa FA. July 12, 2025 at 10:40 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0STKA52_C02 there is MCP AP Error. Thank you very much! July 12, 2025 at 10:43 PM, 카스텔 발라지 F.A. : Solved July 12, 2025 at 10:44 PM, Mohammad Amir : Thank you very much! July 12, 2025 at 11:00 PM, Nguyen Huy : @Mohammad Amir hello, could you please increase the frequency of empty magazines to Line 1 NC CA for a little? July 12, 2025 at 11:01 PM, Mohammad Amir : Hello, Sure , working on it. July 12, 2025 at 11:01 PM, Mohammad Amir : Dear @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 12, 2025 at 11:02 PM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) GF순환CNV 음극쪽 매뉴얼전환 후 오토 부탁드리겠습니다. July 12, 2025 at 11:02 PM, 김지수PM(Gyuri)_FA : @Ankhaa/Ivancsa FA manual > Auto mode change please July 12, 2025 at 11:03 PM, Mohammad Amir : Hello, I am prioritising the empty magazine delivery to line -1 NC CA. Now AGV#2 and AGV#10 on the way to line-1. ✅ Please let me know when you will have enough empty magazine I will make the process standardized. Thank you very much! July 12, 2025 at 11:05 PM, Mohammad Amir : @Zaya/ivancsa FA @FA Please check C1CNV072(P35) carrier again it is not moving and blocking stacking materials delivery. Thank you very much! July 12, 2025 at 11:06 PM, Mohammad Amir : Please take action on priority,there is a hug traffic on the CNV072 and shortages of stacking materials. Thank you very much! July 12, 2025 at 11:06 PM, Nguyen Huy : Understood, thank you for your help! July 12, 2025 at 11:06 PM, Mohammad Amir : You are most welcome! July 12, 2025 at 11:07 PM, 김지수PM(Gyuri)_FA : This message was deleted. July 12, 2025 at 11:09 PM, Mohammad Amir : @FA Please check E0STKC51_C02 there is MCP AP error. Thank you very much! July 12, 2025 at 11:15 PM, Anastasiia : @all Hello, please check the delivery of material An and Ca on line 1. Thanks! July 12, 2025 at 11:15 PM, Mohammad Amir : Hello, Sure, checking! July 12, 2025 at 11:18 PM, Mohammad Amir : This message was deleted. July 12, 2025 at 11:19 PM, Mohammad Amir : Hello, Now AGV#7 ,#3 on the way with materials to line -1. And on top of that ,3 more materials on its way to Line-1 , waiting on the CNV for the AGVs. As I see there is shortages of stacking materials on line-1 so I am prioritising line-1 materials delivery. ✅ P.S.:- There was an issue with CNV072 that's why you faced such situation,I informed the FA earlier ,they are working on it.✅. Thank you very much! July 12, 2025 at 11:20 PM, Anastasiia : Thank you! July 12, 2025 at 11:20 PM, Mohammad Amir : You are welcome! July 12, 2025 at 11:20 PM, Dániel Hufnágel : Please check both stacking line please on GF. And if pines have any material issue please notice it here. Thank you! July 12, 2025 at 11:21 PM, Mohammad Amir : Sure Dániel,we are paying extra attention to stacking area. Thank you very much! July 12, 2025 at 11:21 PM, Dániel Hufnágel : Thank you July 12, 2025 at 11:22 PM, Mohammad Amir : You are most welcome! If you need any assistance,feel free to contact us anytime. July 12, 2025 at 11:30 PM, Mohammad Amir : @Zaya/ivancsa FA @카스텔 발라지 F.A. Please check C1CNV072_P33 there is data loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 12, 2025 at 11:32 PM, Mohammad Amir : Update:- AGV#4 ,#9,#10,#6 with materials and plus 3 more materials on the way to line -1 stacking. ✅ Thank you very much! July 12, 2025 at 11:34 PM, Zulaa/졸라/Ivancsa FA : Done July 12, 2025 at 11:36 PM, Mohammad Amir : Thank you very much n July 12, 2025 at 11:39 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 1-5 (P01/P02) ,cause there is half chamber situation cause we received Unload complete report after Load request. Please this issue exists for quite some time. Thank you very much! July 12, 2025 at 11:39 PM, Mohammad Amir : @Manufacturing Please press LR for VD CA 6-9 (P01/P02) ,cause there is a half chamber situation . Thank you very much! July 12, 2025 at 11:40 PM, Anastasiia : Thank you) July 12, 2025 at 11:40 PM, Mohammad Amir : You are most welcome! July 12, 2025 at 11:41 PM, duzzaman Md (MCS) : @FA Also kindly check E0CN C52_RTV01, It's OOS. CA Reel delivery has stopped. Thank you very much. July 12, 2025 at 11:41 PM, Mohammad Amir : @카스텔 발라지 F.A. Please check this issue. Thank you very much! July 12, 2025 at 11:42 PM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 12, 2025 at 11:45 PM, Yulya Kirsanova : @all Hello, please check the delivery of material An and Ca on line 2. Thanks! July 12, 2025 at 11:46 PM, Mohammad Amir : Hello, I am working on this issue. Thank you very much! July 12, 2025 at 11:46 PM, Mohammad Amir : @Zaya/ivancsa FA Please take action on this issue on priority there is severe shortages of Stacking materials. Thank you very much! July 12, 2025 at 11:46 PM, Yulya Kirsanova : Thank you 👍 July 12, 2025 at 11:48 PM, Zulaa/졸라/Ivancsa FA : Checking July 12, 2025 at 11:48 PM, Cao thi my linh : Helló, kérem, ellenőrizze a gépet (4-9) # 36 AN teljes agv áruk kérem jöjjön el és vegye át az árut nekem, köszönöm July 12, 2025 at 11:48 PM, Mohammad Amir : Sure, checking! July 12, 2025 at 11:51 PM, Cao thi my linh : köszi, épp most vitték el July 12, 2025 at 11:51 PM, duzzaman Md (MCS) : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 06 Pre-Stk ➤ Notching AN: 08 CA: 05 Pre-Stk ➤ VD AN: 02 CA: 04 Post-Stock ➤ Stacking AN: 103 CA: 86 VD CA (Process Breakdown) UR: 08 Drying: 136 LR: 12 Wait: 00 OOS: 12 VD AN (Process Breakdown) UR: 04 Drying: 124 LR: 20 Wait: 44 OOS: 12 Thank you very much! July 12, 2025 at 11:51 PM, 카스텔 발라지 F.A. : I'm already working on it July 12, 2025 at 11:51 PM, Mohammad Amir : Hello, As I checked currently VD AN 4-9 is empty ,we have materials request however we don't have enough materials in warehouse that's why AGV doesn't bring materials as soon as materials will be available it will come. Thank you very much! July 12, 2025 at 11:52 PM, Mohammad Amir : Thank you very much 🙏 July 12, 2025 at 11:52 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_1186 Servo motor alarm occured. Thank you very much! July 12, 2025 at 11:57 PM, Mohammad Amir : @FA Please check E0STKA51_C01 there is Load Oversize error and it is blocking empty trays delivery. Thank you very much! July 13, 2025 at 12:03 AM July 13, 2025 at 12:03 AM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA For your information:- Currently There is traffic on Recovery CNV071(Anode) again so I am increasing priority again to make recovery CNV empty. Thank you very much! July 13, 2025 at 12:12 AM, Nguyen Huy : @FA AGV #4 error near NC CA 1/3, pls check July 13, 2025 at 12:16 AM, Nguyen Huy : @Mohammad Amir VD CA 6-9 AGV didn't unload all the plate, can you check this for me? Top/right and bottom/right July 13, 2025 at 12:16 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 12:18 AM, Mohammad Amir : Hello, Actually,there is a half chamber situation exists I informed several times. To solve this issue please press LR for the half chamber of VD CA 6-9(P01/P02). Thank you very much! July 13, 2025 at 12:19 AM, Nguyen Huy : This chamber was already finished drying, i think it's better to push UR July 13, 2025 at 12:20 AM, Mohammad Amir : This message was deleted. July 13, 2025 at 12:20 AM, Mohammad Amir : Sure,in this case, please press UR. Thank you very much! July 13, 2025 at 12:22 AM, Mohammad Amir : @Manufacturing @Nguyen Huy Please press LR for VD CA 1-5 (P01/P02) ,cause there is half chamber situation cause we received Unload complete report after Load request. Thank you very much! July 13, 2025 at 12:23 AM, Nguyen Huy : I'm on it July 13, 2025 at 12:24 AM, Mohammad Amir : As I see , There is an LR received for VD CA 6-9 (P01/P02) at 00:21 and now carriers on the way to VD CA 6-9. Thank you very much! July 13, 2025 at 12:24 AM, Nguyen Huy : Pls cancle is first, VD OP pressed it by mistake July 13, 2025 at 12:27 AM, Nguyen Huy : Also pls check if the UR was created, thank you July 13, 2025 at 12:27 AM, Mohammad Amir : Sure, cancelled successfully ✅ @ACS @Zaya/ivancsa FA please send the carriers currently waiting on C1STKC71_P14(MLC5794) and P13(MLC4075) back to warehouse as operator mistakenly pressed LR ,I have cancelled the tasks and now this carriers will stop further transfer. Thank you very much! July 13, 2025 at 12:27 AM, Mohammad Amir : Sure checking! July 13, 2025 at 12:28 AM, Mohammad Amir : We didn't receive any UR. Thank you very much! July 13, 2025 at 12:30 AM, Mohammad Amir : @FA kindly check E0CNVC52_RTV01, It's OOS,CA Reel delivery has stopped. Thank you very much. July 13, 2025 at 12:31 AM, Zsurbej Zsolt F.A. : we are working on it July 13, 2025 at 12:33 AM, Nguyen Huy : Operator has pressed it again, please check it July 13, 2025 at 12:34 AM, Mohammad Amir : Unfortunately we still didn't receive it. Operator has again pressed the LR , please cancel this LR from equipment. Thank you very much! July 13, 2025 at 12:35 AM, Nguyen Huy : He cancelled it and pressed UR again, pls check one more time July 13, 2025 at 12:36 AM, Mohammad Amir : Unfortunately,sorry we didn't receive it,still. Thank you very much! July 13, 2025 at 12:38 AM, 김지수PM(Gyuri)_FA : @fa please take care the anode stack side, many unloading jobs are waiting July 13, 2025 at 12:39 AM, Nguyen Huy : How about now? July 13, 2025 at 12:39 AM, Mohammad Amir : Unfortunately still no . Thank you! July 13, 2025 at 12:41 AM, Nguyen Huy : Since this keep happening, we will transfer it to the warehouse by manual, sorry for the inconvenience July 13, 2025 at 12:42 AM, Mohammad Amir : Sure,should I transfer manually? Thank you very much! July 13, 2025 at 12:50 AM, Nguyen Huy : There was an misunderstood between us, the fact is this port hasn't dry , that's why the UR can't be created I will put back the plate and then creat the LR, again sorry for the inconvenience July 13, 2025 at 12:53 AM, Mohammad Amir : Hello, Yes that's why I told you to press LR for half the remaining chamber . It is okay,Please after putting the pallets back , please press LR again for half chamber for P01/P02. Thank you very much! July 13, 2025 at 12:58 AM, Nguyen Huy : I pressed it, please check July 13, 2025 at 12:58 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 1:00 AM, Mohammad Amir : Update: LR received successfully at 00:58 and currently we don't have enough materials as soon as materials will be available it will go to VD chamber . ✅ Thank you very much! July 13, 2025 at 1:00 AM, Nguyen Huy : Thank you for your help! July 13, 2025 at 1:00 AM, Mohammad Amir : You are welcome! July 13, 2025 at 1:02 AM, Mohammad Amir : Kindly check E0CNVC52_RTV01, It's OOS,CA Reel delivery has stopped again. Thank you very much. July 13, 2025 at 1:08 AM, 김지수PM(Gyuri)_FA : @fa Please check the c1cnv072 thanks July 13, 2025 at 1:11 AM, Dániel Hufnágel : @Mohammad Amir please check wgy MLA1223 doesn't move, thank you! Is it in A72 July 13, 2025 at 1:12 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 1:12 AM, Zulaa/졸라/Ivancsa FA : C1STKA72 crane no moving material. July 13, 2025 at 1:12 AM, Dániel Hufnágel : Please, make this priority its blocking whole stacking line July 13, 2025 at 1:13 AM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) 순환CNV좀 확인 부탁드립니다.(음극사이드) July 13, 2025 at 1:14 AM, duzzaman Md (MCS) : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 26 Pre-Stk ➤ Notching AN: 14 CA: 13 Pre-Stk ➤ VD AN: 03 CA: 02 Post-Stock ➤ Stacking AN: 87 CA: 86 VD CA (Process Breakdown) UR: 00 Drying: 128 LR: 08 Wait: 08 OOS: 12 VD AN (Process Breakdown) UR: 12 Drying: 104 LR: 36 Wait: 36 OOS: 12 Thank you very much! July 13, 2025 at 1:16 AM, 김지수PM(Gyuri)_FA : 화물 이유없이 안 움직이는 경우가 있는데, 바로 매뉴얼 전환 및 오토하면 움직여서 보시다가 이상하시면 모드전환 부탁드리겠습니다 July 13, 2025 at 1:18 AM, Mohammad Amir : @김지수PM(Gyuri)_FA Could you please create command to send MLA1223 to pre VD STK from CIM side ,job created from MCS is getting cancelled and this carrier is blocking materials recovery. Thank you very much! July 13, 2025 at 1:22 AM, Mohammad Amir : CCS is not executing the command send from MCS and it says that object doesn't exists,this is the reason for the cancellation of Task . That's why needs to check CCS side. Thank you very much! July 13, 2025 at 1:24 AM, 김지수PM(Gyuri)_FA : There is nothing can do in CCS, MLA1223is located c1stka72_p21 > still remaining in the stk July 13, 2025 at 1:24 AM, Ivan Chobitko : @fa AGV#2 stuck ST L6 machine 20 July 13, 2025 at 1:25 AM, Zulaa/졸라/Ivancsa FA : Solved July 13, 2025 at 1:27 AM, 김지수PM(Gyuri)_FA : We gonna move mla1223 to next track July 13, 2025 at 1:27 AM, 김지수PM(Gyuri)_FA : And then gonna try to make an order in ccs July 13, 2025 at 1:27 AM, Mohammad Amir : Could you please confirm if the actual carrier exists on C1STKA72_P21? Cause we are receiving from the CIM side that there is no object exists. Please move next rack I will try again. Thank you very much! July 13, 2025 at 1:30 AM, Mohammad Amir : @FA Please check C1CNV071_12_019/18 there is Run time Over error and it is blocking recovery of the material. Thank you! July 13, 2025 at 1:34 AM, Mohammad Amir : @FA Please check E0STKC51_C02 there is MCP AP error. Thank you very much! July 13, 2025 at 1:40 AM, Dániel Hufnágel : Now MLA1223 moving July 13, 2025 at 1:40 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. Nc anode agv#06 idle. Thank you. July 13, 2025 at 1:40 AM, Dániel Hufnágel : @Mohammad Amir July 13, 2025 at 1:40 AM, Mohammad Amir : MLA1223 has started to move and Materials recovery has normalized again .✅ Thank you very much ! July 13, 2025 at 1:40 AM, Mohammad Amir : Thank you very much! July 13, 2025 at 1:41 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 1:41 AM, Dániel Hufnágel : You are welcome July 13, 2025 at 1:43 AM, Mohammad Amir : Issue has been resolved successfully ✅ AGV#6 has started to move. Thank you very much! July 13, 2025 at 1:45 AM, 김지수PM(Gyuri)_FA : Is there anyone who paused the E0stka52 port(full reel release and empty reel receive)? Seems like was paused by plc pannel July 13, 2025 at 1:45 AM, Mohammad Amir : Update :- Now jobs have been created for the remaining half chmaber of VD CA 6-9(P01/P02) and AGV#5 on the way with materials ✅. Thank you very much! July 13, 2025 at 2:03 AM, Mohammad Amir : @FA @Zaya/ivancsa FA Please check MLC6392 located at C1CNV072_16_153 it is not moving and blocking stacking materials delivery. Everything is good from our side ✅. Please check physically this issue on priority. Thank you very much! July 13, 2025 at 2:04 AM, 김지수PM(Gyuri)_FA : Please change the mode to manual and then change the auto mode please July 13, 2025 at 2:10 AM, Zulaa/졸라/Ivancsa FA : Gas is coming out. Node 16159. July 13, 2025 at 2:12 AM, 김지수PM(Gyuri)_FA : Seems like air pitting is broken 🥲 July 13, 2025 at 2:13 AM, Zulaa/졸라/Ivancsa FA : Yes July 13, 2025 at 2:13 AM, 카스텔 발라지 F.A. : I will check July 13, 2025 at 2:14 AM, Zulaa/졸라/Ivancsa FA : Fixed July 13, 2025 at 2:18 AM, Nguyen Huy : @FA @Mohammad Amir Pls send AGV to take out materials from chamber 5-2 VD AN and send it back to warehouse, we need to check the chamber, thank you July 13, 2025 at 2:18 AM, Mohammad Amir : Hello, Sure , working on it. Thank you very much! July 13, 2025 at 2:18 AM, Yulya Kirsanova : @all Hello, please check the delivery of material An and Ca on line 3. Thanks! July 13, 2025 at 2:19 AM, Mohammad Amir : Sure checking! July 13, 2025 at 2:19 AM, Yulya Kirsanova : Thank you July 13, 2025 at 2:21 AM, Mohammad Amir : Hello, Currently there is an ongoing issue with C1CNV072 that's why you are witnessing delays in materials delivery to Line-3. Now,AGV#2 and #4 on the way to Stacking line-3. ✅ I will prioritize delivery to line -3 until it becomes stable. I am monitoring. Thank you very much! July 13, 2025 at 2:21 AM, Mohammad Amir : You are welcome! July 13, 2025 at 2:21 AM, duzzaman Md (MCS) : Job to the stk has been created. Thanks ! July 13, 2025 at 2:21 AM, Nguyen Huy : @FA NC AN Robot #3 operation MGZ detect sensor error, pls check July 13, 2025 at 2:28 AM, Tetiana SL/D : Machines stop July 13, 2025 at 2:30 AM, Mohammad Amir : Unfortunately still CNV72 is OOS that's why materials are not transferring. I am monitoring. Thank you very much! July 13, 2025 at 2:30 AM, Mohammad Amir : @FA Is there any update on the maintenance of CNV072? Currently there are severe shortages of stacking materials at line -3. Thank you very much! July 13, 2025 at 2:36 AM, Zulaa/졸라/Ivancsa FA : Hungarian technician working. July 13, 2025 at 2:36 AM, Mohammad Amir : Thank you very much for the confirmation! July 13, 2025 at 2:37 AM, Tetiana SL/D : 1-3 line want order 30 plates Anode Material to avoid stop lines July 13, 2025 at 2:38 AM, Tetiana SL/D : @Mohammad Amir July 13, 2025 at 2:38 AM, duzzaman Md (MCS) : @FA Kindly check E0CNVC52_RTV01, It's OOS, CV01 Run time over error. Thank you very much. July 13, 2025 at 2:39 AM, Mohammad Amir : Yes , unfortunately we still have issues with CNV072 and FA technicians are working on it. As soon as it gets repaired I will prioritize the delivery to fulfill production demand. Thank you very much! July 13, 2025 at 2:41 AM, Tetiana SL/D : Can we transport Anode plates from 72 VD magazine warehouse?? July 13, 2025 at 2:43 AM, Mohammad Amir : Sure ,if you need on urgent basis to continue production,I can release the Stacking Anode plates to Manual ports of STKA72. Should I release it ? Thank you very much! July 13, 2025 at 2:43 AM, MJ/ Ivancsa FA : @Mohammad Amir GF VD AN, Chamber #5-2 P3, material is already taken ( sensor is broken) can you delete information of material, please. July 13, 2025 at 2:43 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 2:44 AM, Tetiana SL/D : Yes, thanks! July 13, 2025 at 2:45 AM, Mohammad Amir : For your information: It seems now CNV072 has been fixed and automatic stacking materials on the way. Should I still release the materials manually ? Thank you very much! July 13, 2025 at 2:45 AM, duzzaman Md (MCS) : Done. Thank you! July 13, 2025 at 2:47 AM, Tetiana SL/D : Yes July 13, 2025 at 2:47 AM, Mohammad Amir : Dear @All, For your information:- Stacking materials:- AGV#3&#8 on the way to Line -1 with Anode materials. ✅ And AGV#1 on the way to Line-3 with Anode materials ✅ I am prioritizing line 1&3 as there is shortages of materials. Thank you very much! July 13, 2025 at 2:48 AM, Mohammad Amir : Sure ,I am releasing it. Tell me how much material would you like to receive? Thank you very much! July 13, 2025 at 2:50 AM, Tetiana SL/D : I don’t have any plates. 5 plates please July 13, 2025 at 2:50 AM, Mohammad Amir : This message was deleted. July 13, 2025 at 2:51 AM, Mohammad Amir : Hello, We have released manually five stacking Anode materials to fulfill production demand. ✅ Please collect it from the C1STKA72_M01. Feel free to contact me immediately if you face production delays because of materials shortages. Thank you very much! July 13, 2025 at 2:51 AM, Dániel Hufnágel : @Tetiana SL/D @Anastasiia @Yulya Kirsanova Please do not put on automatic port, that material was taken out from a72! It will case more issue! Just let it stay in manual car! Thank you! July 13, 2025 at 2:53 AM, Tetiana SL/D : We are going to do this only manually. July 13, 2025 at 3:00 AM, MJ/ Ivancsa FA : @Mohammad Amir I kindly request, you to check GF VD AN C#5-2. Is there any error? July 13, 2025 at 3:00 AM, Mohammad Amir : Sure checking! July 13, 2025 at 3:03 AM, Mohammad Amir : There is a task exists to transfer the materials inside it to back warehouse. Currently from MCS and RTD side there is no issue. Is 5-2 VD AN physically empty ? Thank you very much! July 13, 2025 at 3:09 AM, Nguyen Huy : @Mohammad Amir hello, pls check VD CA 6-6, the AGV only take out 1 plate, 3 plates still inside July 13, 2025 at 3:09 AM, Tetiana SL/D : @Mohammad Amir We take for 3 line 5 plates. But it’s only for 30 min working machines. Please check the anode material supply on line 3. It is still empty. Thanks for your help!🙏 July 13, 2025 at 3:09 AM, Mohammad Amir : Sure checking! July 13, 2025 at 3:10 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 3:10 AM, Mohammad Amir : @Zaya/ivancsa FA @카스텔 발라지 F.A. Please check C1CNV072_P33 there is data loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 13, 2025 at 3:12 AM, MJ/ Ivancsa FA : There are materials inside, can we take it out manually? July 13, 2025 at 3:13 AM, Mohammad Amir : Unfortunately there is again issue with the CNV072 which is blocking materials delivery to Stacking line -3&1. I have informed the FA already. If Production is getting stopped because this I can release manually Anode stacking materials. Should I release it? Thank you very much! July 13, 2025 at 3:14 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 3:14 AM, MJ/ Ivancsa FA : Thank you for your urgent replies July 13, 2025 at 3:17 AM, Mohammad Amir : Hello, Carrier id was reported NULL during unloading that's why automatic unloading has failed. Now I have resolved the issue ✅ And send these materials to back warehouse,AGV#9 and #5 has been assigned. Thank you very much! July 13, 2025 at 3:19 AM, Mohammad Amir : There is already a taks created by us AGV has assigned to pick it up ,AGV#5 on the way ✅. In MCS just P02 has materials and for this AGV#5 has assigned. Thank you very much! July 13, 2025 at 3:24 AM, MJ/ Ivancsa FA : @김지수PM(Gyuri)_FA Can you please delete information of materials in GF VD AN chamber #5-2. It is physically empty. July 13, 2025 at 3:24 AM, MJ/ Ivancsa FA : Thank you July 13, 2025 at 3:24 AM, duzzaman Md (MCS) : On it. July 13, 2025 at 3:24 AM, 김지수PM(Gyuri)_FA : Thanks!! July 13, 2025 at 3:26 AM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) 순환CNV 모니터링좀 부탁드리겠습니다. 많이 쌓여있네요 July 13, 2025 at 3:26 AM, Mohammad Amir : Thank you for confirming. We will cancel the task and delete the information from MCS RTD database as well. July 13, 2025 at 3:27 AM, duzzaman Md (MCS) : It has been done. VD AN 5-2 is empty now. Thank you ! July 13, 2025 at 3:33 AM, Mohammad Amir : @Manufacturing Please check C1CNV072_M04 and remove 1+2 carriers from it,it will increase stacking materials delivery speed,there is shortages of Anode materials so please take action on it on priority. Thank you very much! July 13, 2025 at 3:36 AM, Mohammad Amir : Hello, AGV#2 on the way to line -3 ✅ AGV#6 and #8 on the way to line -2 and AGV#10 on the way to line -1. I am prioritising however there is severe shortages due to continues issue of CNV072. Please let me know if you need manual materials to continue production. Thank you very much! July 13, 2025 at 3:39 AM, duzzaman Md (MCS) : @FA Please check C1CNV071_12_035/036 Data loss error. Thank you! July 13, 2025 at 3:41 AM, Tetiana SL/D : AGV #2 is empty. We don’t have Anode Material until this time July 13, 2025 at 3:42 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. Vd anode agv#01, 04 idle. Thank you. July 13, 2025 at 3:42 AM, Mohammad Amir : Sure , checking! July 13, 2025 at 3:43 AM, Tetiana SL/D : Can we order again manual anode material from VD? July 13, 2025 at 3:45 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir Please increase the priority of 12001(c1stka71_p22) July 13, 2025 at 3:45 AM, Mohammad Amir : Hello, Currently at the moment:- AGV#6 on the with Anode materials to line-2 and one more materials waiting. AGV#5 with Anode materials to line-3. Also AGVs are bringing Cathode materials. Thank you very much! July 13, 2025 at 3:45 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 3:45 AM, 김지수PM(Gyuri)_FA : Many Empty trays are waiting to be transferred 🥲 July 13, 2025 at 3:45 AM, Mohammad Amir : Sure, please tell me how much do you need ? Thank you very much! July 13, 2025 at 3:45 AM, Mohammad Amir : Sure ,we are working on it. July 13, 2025 at 3:46 AM, Yulya Kirsanova : @Mohammad Amir Hello, we have an acute shortage of material on line 1/2/3. Could you please order some anode material for the manual port? July 13, 2025 at 3:46 AM, Mohammad Amir : Sure, please tell me how much would you like to receive. Thank you very much! July 13, 2025 at 3:47 AM, Yulya Kirsanova : Let's start with 20 plates. July 13, 2025 at 3:47 AM, duzzaman Md (MCS) : On it July 13, 2025 at 3:53 AM, Mohammad Amir : Hello, We have released manually 20 stacking Anode materials to fulfill production demand. ✅ Please collect it from the C1STKA72_M01. Feel free to contact me immediately if you face production delays because of materials shortages. Thank you very much! July 13, 2025 at 4:04 AM, Yulya Kirsanova : Yes, of course. Thank you very much, we are already taking out the material. I will write the required amount as needed. Thank you for your help. July 13, 2025 at 4:05 AM, Mohammad Amir : You are most welcome! Feel free to contact MCS/RTD team immediately in case of production delay. July 13, 2025 at 4:25 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 01 Pre-Stk ➤ Notching AN: 18 CA: 17 Pre-Stk ➤ VD AN: 03 CA: 07 Post-Stock ➤ Stacking AN: 83 CA: 74 VD CA (Process Breakdown) UR: 12 Drying: 52 LR: 48 Wait: 48 OOS: 08 VD AN (Process Breakdown) UR: 08 Drying: 144 LR: 00 Wait: 00 OOS: 12 Thank you very much! July 13, 2025 at 4:43 AM, Mohammad Amir : @FA Please check NC AN Robot #3 . Thank you very much! July 13, 2025 at 4:54 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. Vd anode agv#01, 04 idle. Thank you. July 13, 2025 at 4:55 AM, Mohammad Amir : Sure, checking! July 13, 2025 at 4:57 AM, Mohammad Amir : Good morning, Issue has been resolved successfully ✅. Now AGV#1 and #4 has started to move. Thank you very much! July 13, 2025 at 5:27 AM, 정은탁 (Jung EunTak) : @김지수PM(Gyuri)_FA Pm님 현재 An 전창고에 풀매거진 약 80여개가 있음에도 불구하고, An VD Chamber 플레이트 미적재 설비가 30대 발생 중입니다. 메뉴얼 LR요청을 진행했으나 효과가 미미하여 확인 및 조치 요청드립니다. July 13, 2025 at 5:38 AM, 김지수PM(Gyuri)_FA : 회수물류 공매거진이 쌓여서, 전창고에서 vd로 반송이 지연이 생겼습니다. 현재 priority 조정을통해 VD반송 선반영되게끔 진행중에 있습니다. July 13, 2025 at 5:48 AM, Tetiana SL/D : @fa AGV #9 stop near 3/9 machine. Check please, thanks! July 13, 2025 at 5:56 AM, Tetiana SL/D : @FA July 13, 2025 at 5:59 AM, Zaya/ivancsa FA : solved July 13, 2025 at 6:17 AM, 김지수PM(Gyuri)_FA : @FA Please check the carrier on the C1STKA71_M01_OP01 July 13, 2025 at 6:18 AM, 김지수PM(Gyuri)_FA : Cargo is detected but no data July 13, 2025 at 6:28 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 05 CA: 36 Pre-Stk ➤ VD AN: 00 CA: 03 Post-Stock ➤ Stacking AN: 46 CA: 93 VD CA (Process Breakdown) UR: 00 Drying: 64 LR: 28 Wait: 24 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 112 LR: 04 Wait: 40 OOS: 12 July 13, 2025 at 6:43 AM, QuangPhan : Good morning! @MCS Please check LR half chamber. VD AN 1-1 1-6 2-7 2-9 3-1 3-4 4-1 Thank you! July 13, 2025 at 6:43 AM, QuangPhan : Sory 1-1 1-6 Is Full July 13, 2025 at 6:45 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! What about 2-7? It’s also showing full. There are jobs for the remaining half chambers. July 13, 2025 at 6:50 AM, QuangPhan : 2-7 Is full. Thank you so much!. July 13, 2025 at 7:25 AM, Shahbaz 샤바즈 MCS/RTD : @FA @Zaya/ivancsa FA There Carrier ID was null when there was UR from VD CA 5-6 P02/P04. Please return them to the warehouse. Thank you July 13, 2025 at 7:42 AM, Zaya/ivancsa FA : Done July 13, 2025 at 7:50 AM, Hữu Thắng : @FA RTV GF NC CA Error . Can you please check it . July 13, 2025 at 8:01 AM, QuangPhan : @MCS @FA VD AN 6-1 Sensor error. Please send plates warehouse, the technicians repair machine start. Thank you. July 13, 2025 at 8:18 AM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 10 CA: 19 Pre-Stk ➤ VD AN: 09 CA: 01 Post-Stock ➤ Stacking AN: 25 CA: 106 VD CA (Process Breakdown) UR: 00 Drying: 120 LR: 44 Wait: 00 OOS: 08 VD AN (Process Breakdown) UR: 04 Drying: 96 LR: 12 Wait: 68 OOS: 12 July 13, 2025 at 8:21 AM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA please transfer them to the warehouse. Thank you July 13, 2025 at 8:33 AM, Zaya/ivancsa FA : Done, 6-1 empty now July 13, 2025 at 8:44 AM, QuangPhan : Thank you! July 13, 2025 at 9:18 AM, QuangPhan : Hello! @FA @AGV . VD An 1-4 the plates was wrong position . Please use AGV to fix it . thank you! July 13, 2025 at 10:12 AM, Baek Hojong(백호종)FA : @Zaya/ivancsa FA An Please remove the manual outport plate immediately. July 13, 2025 at 10:22 AM, Nauman/Ivancsa FA invited Atif/Ivancsa FA. July 13, 2025 at 10:29 AM, MCS/RTD System : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 17 CA: 19 Pre-Stk ➤ VD AN: 52 CA: 01 Post-Stock ➤ Stacking AN: 00 CA: 94 VD CA (Process Breakdown) UR: 12 Drying: 140 LR: 04 Wait: 00 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 100 LR: 12 Wait: 52 OOS: 12 July 13, 2025 at 10:43 AM, 인제(Hwang) : Please send all the plates of VD Ca 2-1 to the warehouse July 13, 2025 at 10:57 AM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA Please return them to the warehouse. Thank you July 13, 2025 at 11:07 AM, Zaya/ivancsa FA : Done, 2-1 empty now July 13, 2025 at 11:07 AM, QuangPhan : Hello! @FA @AGV . VD An 2-4 the plates was wrong position . Please use AGV to fix it . thank you! July 13, 2025 at 11:15 AM, Hữu Thắng : @Fa vd ca 1/9 P04 is wrong position . Could you please fix it . Thank you July 13, 2025 at 11:24 AM, Zaya/ivancsa FA invited Dalai/ IvancsaFA. July 13, 2025 at 11:24 AM, Zaya/ivancsa FA : done , Chamber closed July 13, 2025 at 11:25 AM, Hữu Thắng : @MCS Can you please check RTV NC CA . As i see reel is not moving . Thank you July 13, 2025 at 11:31 AM, Shahbaz 샤바즈 MCS/RTD : @FA The reel tray LTC1660 is not moving from RTV. Please check. Thank you July 13, 2025 at 11:40 AM, 김정희(Jeong hee FA) : @MCS Please send me AN VD2-2 po1~po4 stk72 Thank you July 13, 2025 at 11:43 AM, Shahbaz 샤바즈 MCS/RTD : UR received and jobs are created for VD AN 2-2. July 13, 2025 at 11:44 AM, 김정희(Jeong hee FA) : Thank you. July 13, 2025 at 11:58 AM, Kateryna SSL C : Hello! @Shahbaz 샤바즈 MCS/RTD could you please share available lot for ST GF? July 13, 2025 at 12:00 PM, Shahbaz 샤바즈 MCS/RTD : Hello! GF ST available lots: An: 13 Ca: 79 July 13, 2025 at 12:02 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 39 CA: 23 Pre-Stk ➤ VD AN: 36 CA: 01 Post-Stock ➤ Stacking AN: 13 CA: 79 VD CA (Process Breakdown) UR: 00 Drying: 148 LR: 20 Wait: 00 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 136 LR: 04 Wait: 28 OOS: 12 July 13, 2025 at 12:55 PM, Hữu Thắng : This message was deleted. July 13, 2025 at 12:59 PM, 김현태 : NC AN AGV #7 error Thanks July 13, 2025 at 1:12 PM, 배병민 (Bae Byoungmin) : GF Ga Notching Sangkongdeck RTV is down for a while to check and adjust errors. We will notify you when it is restored. July 13, 2025 at 1:21 PM, 김현태 : This message was deleted. July 13, 2025 at 1:29 PM, 전 운 (Jeon Woon) : Please Rechecking July 13, 2025 at 1:31 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 01 CA: 00 Pre-Stk ➤ Notching AN: 26 CA: 01 Pre-Stk ➤ VD AN: 60 CA: 00 Post-Stock ➤ Stacking AN: 08 CA: 82 VD CA (Process Breakdown) UR: 32 Drying: 128 LR: 04 Wait: 00 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 156 LR: 08 Wait: 12 OOS: 12 July 13, 2025 at 2:05 PM, 배병민 (Bae Byoungmin) : RTV inspection has been completed and production has begun. July 13, 2025 at 2:33 PM, Hữu Thắng : @MCS Its seem like RTV NC CA error occurred . Because we didn’t recieved any material for a while . Thank you ! July 13, 2025 at 2:35 PM, Shahbaz 샤바즈 MCS/RTD : Currently NC Ca RTV is working normally. Hope there will be material delivery soon. July 13, 2025 at 2:41 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check NC An E0CNVA52 RTV “Data mismatch error “ Thank you July 13, 2025 at 3:06 PM, 전 운 (Jeon Woon) : Please Rechecking. July 13, 2025 at 3:09 PM, QuangPhan : @MCS Please check NC AN 5/1. The AGV has not been picking up the full mgz for a long time. Thank u. July 13, 2025 at 3:10 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 09 CA: 01 Pre-Stk ➤ VD AN: 33 CA: 03 Post-Stock ➤ Stacking AN: 52 CA: 85 VD CA (Process Breakdown) UR: 08 Drying: 140 LR: 16 Wait: 00 OOS: 16 VD AN (Process Breakdown) UR: 16 Drying: 112 LR: 40 Wait: 00 OOS: 12 July 13, 2025 at 3:12 PM, 김지수PM(Gyuri)_FA : @fa Please check MLC1237 on 16065track(c1cnv072) > not moving July 13, 2025 at 4:04 PM, QuangPhan : @MCS @FA VD AN 5-2 Sensor error. Please send plates warehouse, the technicians repair machine start. Thank u July 13, 2025 at 4:23 PM, Shahbaz 샤바즈 MCS/RTD : @FA Please check C1CNV072_P27 Data mismatch error Thank you July 13, 2025 at 4:24 PM, Shahbaz 샤바즈 MCS/RTD : @Zaya/ivancsa FA Please return the plates of VD AN 5-2 to the warehouse. Thank you July 13, 2025 at 4:27 PM, Zaya/ivancsa FA : Working on it, AGVs are busy July 13, 2025 at 4:44 PM, Kateryna SSL C : Update please July 13, 2025 at 4:46 PM, Shahbaz 샤바즈 MCS/RTD : GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 01 CA: 00 Pre-Stk ➤ Notching AN: 01 CA: 00 Pre-Stk ➤ VD AN: 26 CA: 04 Post-Stock ➤ Stacking AN: 45 CA: 86 VD CA (Process Breakdown) UR: 24 Drying: 112 LR: 12 Wait: 00 OOS: 16 VD AN (Process Breakdown) UR: 00 Drying: 96 LR: 28 Wait: 00 OOS: 08 July 13, 2025 at 4:58 PM, Zaya/ivancsa FA : Done , Chamber 5-2 empty now July 13, 2025 at 5:01 PM, 인제(Hwang) : An VD 5-5 우측상단 플레이트 안착불량입니다. 확인 부탁드립니다 July 13, 2025 at 5:08 PM, Zaya/ivancsa FA : Solved, chamber 5-5 closed July 13, 2025 at 5:17 PM, 인제(Hwang) : Repair is needed for the chamber of Ca VD 5-5. Please send the plates inside the chamber to the warehouse July 13, 2025 at 5:24 PM, Hữu Thắng : @MCS Could you please check LR NC CA 1/1 . The machine waiting for empty magazine a long time July 13, 2025 at 5:27 PM, Shahbaz 샤바즈 MCS/RTD : No LR received for empty magazines from NC CA 1-1 P03/P04. July 13, 2025 at 5:31 PM, Hữu Thắng : Could you please check what the reason is ? Because there’s no alarm . It looks normally July 13, 2025 at 5:33 PM, Hữu Thắng : Can you recheck please . I’ve reset the process July 13, 2025 at 5:33 PM, 인제(Hwang) : NC Ca Robot#1 Error July 13, 2025 at 5:37 PM, Shahbaz 샤바즈 MCS/RTD : Please can you confirm the machine is C1NCC010 because the last LR received for empty magazines was at 12-07-2025 18:12 July 13, 2025 at 5:39 PM, Shahbaz 샤바즈 MCS/RTD : You reset only P01/P02 but input ports are P03/P04. July 13, 2025 at 5:59 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:12/12 Overtime (0):- Sick (0): - Holiday (0): - Shift change(0): - Elektróda:(4) Oláh András, Szabadi Miklós, Kiss Balázs, Novák Károly Assembly(5): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kasztel Balázs, Kovács Szabika Modul(2): Nagy Gábor, Martina Dávid July 13, 2025 at 6:04 PM, Gua/ IvancsaFa : @mcs hello, could you check VD CA AGV#4. The chamber is empty. Please cancel the job of Agv#4. July 13, 2025 at 6:05 PM, duzzaman Md (MCS) : Sure, checking July 13, 2025 at 6:09 PM, duzzaman Md (MCS) : It has been done! Thank you very much! July 13, 2025 at 6:09 PM, 김지수PM(Gyuri)_FA : @fa Please check robot#1 (cathode) July 13, 2025 at 6:11 PM, duzzaman Md (MCS) : Dear Sir's and everyone, Good evening ! Please find - GF Next Lot Quantity Availablity:- GF NC Reel Available AN: 00 CA: 00 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 24 CA: 02 Post-Stock ➤ Stacking AN: 50 CA: 124 VD CA (Process Breakdown) UR: 04 Drying: 108 LR: 20 Wait: 44 OOS: 12 VD AN (Process Breakdown) UR: 00 Drying: 112 LR: 16 Wait: 00 OOS: 08 Thank you very much ! July 13, 2025 at 6:18 PM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. July 13, 2025 at 6:19 PM, Tasnim / Ivancsa FA : Please check.. Thank you.. July 13, 2025 at 6:20 PM, Dániel Hufnágel : Just a moment please, we have enough things to do July 13, 2025 at 6:24 PM, Nandia FA : @mcs hello, could you check VD CA #18 The chamber is empty. July 13, 2025 at 6:24 PM, duzzaman Md (MCS) : Sure. Checking July 13, 2025 at 6:29 PM, duzzaman Md (MCS) : Just check, Nandia. Please press LR again for P01, P02 Thank you very much ! July 13, 2025 at 6:31 PM, Mohammad Amir : Good evening @FA Please confirm is there any maintenance going on C1CNV072 ,it is OOS and it is blocking stacking materials delivery to Stacking line 1&2&3. Thank you very much! July 13, 2025 at 6:35 PM, Gua/ IvancsaFa : @mcs hello, could you check VD CA AGV#10. The chamber is empty. Please cancel the job of Agv#10. July 13, 2025 at 6:36 PM, Mohammad Amir : Good evening, We are checking! Thank you very much! July 13, 2025 at 6:40 PM, duzzaman Md (MCS) : Dear @FA, Good evening ! Please check VD AN 4-8, P01 Please confirm it's empty or not . Thank you very much for checking. July 13, 2025 at 6:40 PM, Mohammad Amir : Issue has been resolved ✅. Thank you very much! July 13, 2025 at 6:42 PM, Gua/ IvancsaFa : Hello, it has material. July 13, 2025 at 6:42 PM, Mohammad Amir : Please confirm the materials id. Thank you very much! July 13, 2025 at 6:45 PM, Gua/ IvancsaFa : bar code has been scanned to chamber July 13, 2025 at 6:45 PM, Gua/ IvancsaFa : MLA6076 1. MA2236 2. MA1353 3. MA5411 4. MA5408 5. MA2281 6. MA3013 July 13, 2025 at 6:45 PM, Mohammad Amir : Thank you very much for sharing. We are working on this issue. July 13, 2025 at 6:46 PM, Gua/ IvancsaFa : you are welcome July 13, 2025 at 6:49 PM, Cao thi my linh : This message was deleted. July 13, 2025 at 6:49 PM, Mohammad Amir : Dear @FA Could you please check the MLA6076 located at VD AN 4-1_P01 , according to @Gua/ IvancsaFa this plate exists here. And according to our MCS RTD database this plate MLA6076 exists at C1STKA71(0205103),so please check this location as well. And please inform me,it is suspected Duplicated plate issue (magazine seems unique). Looking forward to hearing from you. Thank you very much! July 13, 2025 at 6:50 PM, Cao thi my linh : Üdvözlöm, például egy GF vacum AN (4-6) targoncából hiányzik 2 tálca, kérem, ellenőrizze újra, köszönöm. July 13, 2025 at 6:50 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 6:51 PM, Mohammad Amir : Good evening, For your information:- As we checked this chamber VD AN 4-6 is filled with materials. Thank you very much! July 13, 2025 at 7:02 PM, Mohammad Amir : @FA Please check C1STKA72_P21 it is OOs because of Run time Over error and it is blocking materials recovery. Thank you very much! July 13, 2025 at 7:02 PM, Gua/ IvancsaFa : This message was deleted. July 13, 2025 at 7:03 PM, Mohammad Amir : This message was deleted. July 13, 2025 at 7:03 PM, Gua/ IvancsaFa : @mcs hello, could you check VD CA AGV#01. The chamber(#18) is empty. Please cancel the job of Agv#01. July 13, 2025 at 7:03 PM, Mohammad Amir : Good evening, Sure we are checking! July 13, 2025 at 7:07 PM, Mohammad Amir : @FA @Gua/ IvancsaFa Please check C1CNV072_16_126/128 there Data Loss error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 13, 2025 at 7:10 PM, Mohammad Amir : Good evening Dear @카스텔 발라지 F.A. , Could you please check this issue. Thank you very much! July 13, 2025 at 7:12 PM, Gua/ IvancsaFa : solved July 13, 2025 at 7:13 PM, Mohammad Amir : Now, Please check MLC3104 located at C1CNV072_16_126 ,it is not moving and now blocking stacking materials delivery. Please check the issue physically. Everything is good from MCS RTD side ✅ Thank you very much! July 13, 2025 at 7:15 PM, duzzaman Md (MCS) : Solved. Thank you very much ! July 13, 2025 at 7:16 PM, Cao thi my linh : Üdvözlöm. A GF VD AN (6-1) javításra szorul, Agv, kérem, segítsen nekünk kiszállítani az árut, rendben, köszönöm. July 13, 2025 at 7:16 PM, Lika : Hello, we have a problem with the delivery of cathode magazines, there is no material since the beginning of the shift 4 line 13 machine 🥲 July 13, 2025 at 7:16 PM, Zsurbej Zsolt F.A. : @ (MCS/RTD) We took out plate MLA1102 from C1STKA72_P21 port The plate handle is damaged! July 13, 2025 at 7:17 PM, Mohammad Amir : Sure checking! July 13, 2025 at 7:17 PM, Lika : Thank you!! July 13, 2025 at 7:19 PM, Mohammad Amir : Good evening, Actually there is continuous issue with the CNV72 that's why you are witnessing such delays. I am monitoring the situation and will prioritise the materials delivery to the mentioned machines as soon as the issue with CNV072 will be resolved. ✅ Thank you very much! July 13, 2025 at 7:20 PM, Mohammad Amir : Good evening, Sure ,we will sent the materials back to warehouse and afterwards you can start the repair. Thank you very much! July 13, 2025 at 7:21 PM, Mohammad Amir : Good evening, Information has been updated in MCS RTD database ✅ Thank you very much! July 13, 2025 at 7:22 PM, Lika : Okay,thank you very much! July 13, 2025 at 7:22 PM, Cao thi my linh : Köszönöm July 13, 2025 at 7:22 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 7:22 PM, Mohammad Amir : Nagyon Szivesen! July 13, 2025 at 7:25 PM, duzzaman Md (MCS) : Hi @Cao thi my linh , Jobs has been created. Thank you very much. Let us know if you need further assistance. July 13, 2025 at 7:28 PM, Tasnim / Ivancsa FA : NC AN AGV #4 error.. Please check.. July 13, 2025 at 7:28 PM, Cao thi my linh : Thank you July 13, 2025 at 7:28 PM, duzzaman Md (MCS) : You're most welcome 🙏 July 13, 2025 at 7:31 PM, Mohammad Amir : @Manufacturing @Elena SL Please check and remove 1+1 carrier from C1CNV072_M04,it will stacking materials delivery. Issue :- For MLC2161(Located at M04) we found for magazine MC6134 stacking process is still going on. For MLA6119(waiting to go to M04) we found for magazine MA1060 stacking process still going on. Thank you very much! July 13, 2025 at 7:40 PM, Mohammad Amir : Dear @Lika Good evening Are you using Line-4-14_P02(Cathode port ) in production? Cause we didn't receive materials request from this port that's why this port is not being used in production currently, please check if everything is good please request materials there as well,it will increase production capacity. Thank you very much! July 13, 2025 at 7:41 PM, Lika : Okay 👌 July 13, 2025 at 7:41 PM, Mohammad Amir : @FA Please check NC CA Robot #1. Thank you very much! July 13, 2025 at 7:42 PM, Mohammad Amir : Thank you very much! July 13, 2025 at 7:43 PM, Mohammad Amir : Dear @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 13, 2025 at 7:45 PM, Elena SL : Hello 👋 I checked, the port is empty. The white indicator is on. July 13, 2025 at 7:45 PM, Mohammad Amir : Dear @FA @김지수PM(Gyuri)_FA Good evening, Could you please check the MLA6076 located at VD AN 4-1_P01 , according to @Gua/ IvancsaFa this plate exists here. And according to our MCS RTD database this plate MLA6076 exists at C1STKA71(0205103),so please check this location as well. And please inform me,it is suspected Duplicated plate issue (magazine seems unique). Thank you very much! July 13, 2025 at 7:47 PM, Mohammad Amir : Hello, Yes it's empty cause we didn't receive any material requests from the equipment,If everything is good with this port , please request materials there, production capacity will increased. Thank you very much! July 13, 2025 at 7:49 PM, Nguyen Huy : @FA Hello, Robot #1 NC CA data mismatch error, pls check July 13, 2025 at 7:49 PM, Nguyen Huy : AGV #2 error near Robot #2 NC CA, pls check it too, thank you July 13, 2025 at 7:50 PM, Elena SL : The operator requested the material several times. Please check now. July 13, 2025 at 7:51 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 7:52 PM, Mohammad Amir : Now , Issue has been resolved ✅. AGV #2 on the way with CA material MLC6046 on the way ✅. Thank you very much! July 13, 2025 at 7:54 PM, 이도형 (Lee) : @FA VD An #10 AGV is stopped. Please check. July 13, 2025 at 7:56 PM, Elena SL : Thank you 🙏 July 13, 2025 at 7:57 PM, Mohammad Amir : You are welcome! July 13, 2025 at 7:58 PM, Mohammad Amir : @FA Please check C1STKA71_C02 there is Load Oversize error and it is blocking empty magazine delivery and materials recovery. Thank you very much! July 13, 2025 at 7:59 PM, 이도형 (Lee) : @FA C1STKA71 C02 LOAD OVERSIZE Error check July 13, 2025 at 7:59 PM, 방혁 PM(Bang.Hyuk) FA : 안녕하세요 AGV10호기 대상 명령이 P01에만 잡혔는데 P02에 있는 캐리어에는 명령이 안잡혔어요 July 13, 2025 at 8:00 PM, 방혁 PM(Bang.Hyuk) FA : 잡취소 시켜드릴테니 UR재생성 해주실수있을까요 July 13, 2025 at 8:02 PM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir Hello amir can you check UR for C5VDA010_P01,P02? July 13, 2025 at 8:02 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 8:02 PM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. July 13, 2025 at 8:03 PM, Tasnim / Ivancsa FA : Please check.. Thank you.. July 13, 2025 at 8:04 PM, Mohammad Amir : Good evening, Currently there is no active UR for the mentioned ports. Thank you very much! July 13, 2025 at 8:06 PM, Mohammad Amir : @FA Please check C1CNV071_13_036 there is STP-02 Down error and it is blocking recovery of the material. Thank you! July 13, 2025 at 8:09 PM, Mohammad Amir : @FA Please check NC CA RTV01 Reel LTC1266 located on it and it has destination BP09 _CNVC52. It is not moving, everything is good from MCS RTD side ✅. Please check physically on priority as CA reels delivery has stopped because of this issue. Thank you very much! July 13, 2025 at 8:19 PM, 이도형 (Lee) : @FA An after-warehouse silent stop confirmation July 13, 2025 at 8:20 PM, Mohammad Amir : @FA Please check C1STKA72_C01/C02 it is inactive without error and Anode stacking materials delivery has stopped. Please make it active on priority. Thank you very much! July 13, 2025 at 8:29 PM, Mohammad Amir : Dear @FA, Please make C1STKA72_C01/C02 in active mode ,it is inactive since 19:57. Because of this there are shortages of Anode stacking materials. Thank you very much! July 13, 2025 at 8:29 PM, Gua/ IvancsaFa : @mcs hello, could you check VD CA AGV#02. The chamber(#18) is empty. Please cancel the job of Agv#02. July 13, 2025 at 8:29 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 8:35 PM, Mohammad Amir : Job have been cancelled successfully ✅ Thank you very much! July 13, 2025 at 8:36 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please increase the priority of C72 Circular Cnv > C72 July 13, 2025 at 8:36 PM, Mohammad Amir : Good evening @김지수PM(Gyuri)_FA Sure, working on it. Thank you very much! July 13, 2025 at 8:40 PM, 김지수PM(Gyuri)_FA : Now I'm increasing thankss! July 13, 2025 at 8:41 PM, duzzaman Md (MCS) : We did for some as well. Thank you very much. July 13, 2025 at 8:44 PM, Mohammad Amir : @Gua/ IvancsaFa @카스텔 발라지 F.A. Please check C1CNV072_P33 there is data loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 13, 2025 at 8:47 PM, 이도형 (Lee) : @FA VD An #9 AGV is stopped. Please check. July 13, 2025 at 8:50 PM, Cao thi my linh : Üdvözlöm. A GF VD AN (3-8) javításra szorul, Agv, kérem, segítsen nekünk kiszállítani az árut, rendben, köszönöm. July 13, 2025 at 8:51 PM, Mohammad Amir : Good evening, Sure ,we will sent the materials back to warehouse and afterwards you can start the repair. Thank you very much! July 13, 2025 at 8:53 PM, Mohammad Amir : Hello, Actually VD AN 3-8 is already empty,there are automatic tasks to this chamber we are cancelling this. Thank you very much! July 13, 2025 at 8:56 PM, Mohammad Amir : Now, No material will arrive to VD AN 3-8,so you may start repairing. Thank you very! July 13, 2025 at 9:00 PM, Anastasiia : @all Hello, please check the delivery of material An on line 1. Thanks! July 13, 2025 at 9:00 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 9:02 PM, duzzaman Md (MCS) : @FA Please check E0CNVA51_P12/06_301/06_307/P07 these are OOS. Please check these on priority. Thank you very much ! July 13, 2025 at 9:03 PM, Mohammad Amir : Hello, Currently there is issue with CNV072 that's why Anode materials is not transferring to Stacking line-1,we already informed the FA. On top of that C1STKA72_C01/C02 was inactive since 19:57 till 20:34 that's why it delayed Anode stacking materials delivery. We are monitoring and paying extra attention to stacking area till situation normalized. Thank you very much! July 13, 2025 at 9:09 PM, Anastasiia : Thanks) July 13, 2025 at 9:14 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 9:15 PM, Mohammad Amir : Dear @FA, Any update on the maintenance of CNV072? It is still OOS and stacking materials delivery has been affected. Thank you very much! July 13, 2025 at 9:16 PM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working again.. July 13, 2025 at 9:17 PM, Tasnim / Ivancsa FA : Please check.. Thank you.. July 13, 2025 at 9:26 PM, Ivan Chobitko : @fa Please check AGv #7 and #8 they got stuck during the shipment of empty MGZs and blocked all traffic, ST CV72 L6 and L5 July 13, 2025 at 9:26 PM, duzzaman Md (MCS) : Respected Sir and Esteemed members, Kindly find below the GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 14 CA: 00 Pre-Stk ➤ Notching AN: 03 CA: 04 Pre-Stk ➤ VD AN: 44 CA: 02 Post-Stock ➤ Stacking AN: 30 CA: 116 VD CA (Process Breakdown) UR: 00 Drying: 112 LR: 04 Wait: 40 OOS: 16 VD AN (Process Breakdown) UR: 28 Drying: 92 LR: 14 Wait: 00 OOS: 08 Sincere thanks for your attention! July 13, 2025 at 9:26 PM, Elena SL : @Mohammad Amir no delivery of anode material to line 4. please share information. thank you. July 13, 2025 at 9:27 PM, duzzaman Md (MCS) : Checking July 13, 2025 at 9:27 PM, Ivan Chobitko : I think it’s reason July 13, 2025 at 9:28 PM, duzzaman Md (MCS) : This is indeed the reason. And the CNV is going OOS too frequently. Thank you for your understanding. July 13, 2025 at 9:29 PM, Mohammad Amir : Dear @FA, Any update on the maintenance of CNV072? It is still OOS and stacking materials delivery has been affected. Thank you very much! July 13, 2025 at 9:30 PM, 정은탁 (Jung EunTak) : @FA An VD 6-1(#46) 우측 상단 플레이트 안착 불량입니다. 확인 부탁드립니다. July 13, 2025 at 9:30 PM, Yulya Kirsanova : @Mohammad Amir no delivery of anode material to line 2. please share information. thank you. July 13, 2025 at 9:31 PM, duzzaman Md (MCS) : Checking July 13, 2025 at 9:31 PM, Mohammad Amir : Dear Yulya, C1CNV072 is OOS that's why Anode materials delivery has stopped. I already informed FA ,they are working on it. Thank you very much! July 13, 2025 at 9:37 PM, Gua/ IvancsaFa : @mcs please send agv#10’s material to stk72. thank you July 13, 2025 at 9:37 PM, Yulya Kirsanova : Please tell me if I can get anode material on the manual port to keep the line running until the problem is solved? July 13, 2025 at 9:38 PM, Mohammad Amir : Sure,we can release Anode stacking materials manually to keep the production smooth. Please tell us how much Anode stacking materials do you need ? Thank you very much! July 13, 2025 at 9:39 PM, Yulya Kirsanova : Thank you very much, 15 plates please. July 13, 2025 at 9:39 PM, Mohammad Amir : We are checking! July 13, 2025 at 9:39 PM, Mohammad Amir : Sure, we are working on it. July 13, 2025 at 9:39 PM, Yulya Kirsanova : Thank you so much 😊 July 13, 2025 at 9:39 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 9:46 PM, Mohammad Amir : Issue has been resolved ✅ AGV#10 has started to move. Thank you very much! July 13, 2025 at 9:46 PM, duzzaman Md (MCS) : Materials have been released. Thank you very much! Please let us know if you need further assistance! July 13, 2025 at 9:48 PM, Mohammad Amir : @FA Please check C1STKA72_C02 there is Ready off during Forking error and now it is blocking Anode stacking materials delivery. Please check the issue on priority. Thank you very much! July 13, 2025 at 10:05 PM, MJ/ Ivancsa FA : @Mohammad Amir Can you check GF VD AN, C1STKA72_P14. Material is still there and AGVs are waiting for it. Thank you July 13, 2025 at 10:06 PM, Mohammad Amir : Sure, checking! July 13, 2025 at 10:06 PM, Tetiana SL/D : @Mohammad Amir 3 line need anode and cathode material , please send 6 plates Anode and 6 Cathode. Thanks 🙏 July 13, 2025 at 10:07 PM, Mohammad Amir : Materials has went inside the STK so now AGV can deliver materials ✅ Thank you very much! July 13, 2025 at 10:07 PM, Mohammad Amir : Sure, working on it. July 13, 2025 at 10:07 PM, MJ/ Ivancsa FA : Thank you so much for urgent actions. July 13, 2025 at 10:08 PM, duzzaman Md (MCS) : This message was deleted. July 13, 2025 at 10:08 PM, Mohammad Amir : You are most welcome! We are glad to help you, contact us again for future assistance, please. July 13, 2025 at 10:09 PM, Tetiana SL/D : Thanks, on which port you send? July 13, 2025 at 10:09 PM, Mohammad Amir : We will send it to the Post VD STK(STK72_M01). Thank you very much! July 13, 2025 at 10:11 PM, Mohammad Amir : Hello, We have released manually 6 stacking Anode and Cathode materials to fulfill production demand. ✅ Please collect it from the C1STK72_M01. Feel free to contact me immediately if you face production delays because of materials shortages. Thank you very much! July 13, 2025 at 10:14 PM, duzzaman Md (MCS) : @FA Please check MLA6302 located at CNV072_16_126 it's stuck and blocking Stacking materials. Please check this on priority basis. Thank you for your urgent support. July 13, 2025 at 10:15 PM, Ivan Chobitko : share status now please, stoke still OOS? July 13, 2025 at 10:17 PM, Mohammad Amir : Now, STK is in Service however currently MLA6302 is not moving and blocking stacking materials delivery. We have informed the FA already. We are monitoring. Thank you very much! July 13, 2025 at 10:19 PM, N.Zoli F.A. : Solved July 13, 2025 at 10:19 PM, Mohammad Amir : Thank you very much! July 13, 2025 at 10:19 PM, Ivan Chobitko : Please if possible increase priority anode for L6 July 13, 2025 at 10:20 PM, Mohammad Amir : Sure, we are working on it. Thank you! July 13, 2025 at 10:21 PM, Yulya Kirsanova : @All hello please help, AGV No.10 Stopped 3/13 July 13, 2025 at 10:22 PM, Ivan Kasian Sl 5L 🥹 : @fa help please July 13, 2025 at 10:22 PM, duzzaman Md (MCS) : There are 3 active jobs. We've increased the priority for all 3 to the highest. Thank you very much ! July 13, 2025 at 10:23 PM, MJ/ Ivancsa FA : @duzzaman Md (MCS) pls delete task from GF VD AN AGV#09. It keeps coming chamber 6-1. Both pf them are empty. July 13, 2025 at 10:24 PM, duzzaman Md (MCS) : On it. July 13, 2025 at 10:25 PM, duzzaman Md (MCS) : Could you please confirm if the chambers are empty? July 13, 2025 at 10:25 PM, Yulya Kirsanova : @Mohammad Amir no delivery of cathode material to line 2. please share information. thank you. July 13, 2025 at 10:25 PM, Mohammad Amir : Sure checking! July 13, 2025 at 10:25 PM, Dániel Hufnágel : @Mohammad Amir please always check A72 port 12004, and if the carrier do not move please notice as fast as you can Thank you! July 13, 2025 at 10:25 PM, Mohammad Amir : Sure ,we are monitoring. Thank you very much! July 13, 2025 at 10:27 PM, MJ/ Ivancsa FA : Yes it is empty July 13, 2025 at 10:28 PM, Mohammad Amir : Hello, Due to issue with CNV072 OOS and after MLA6302 is not moving these two issues delayed delivery of materials to to O/P ports for CNV and that's why there is no material at line -2. Now everything is fine ✅ and materials on the way to O/P ports of the CNV afterwards it will go to line 1&2&3 . We are paying extra attention to stacking area. Thank you very much! July 13, 2025 at 10:28 PM, Mohammad Amir : Thank you very much for the confirmation! July 13, 2025 at 10:29 PM, duzzaman Md (MCS) : Got you. According to MCS, there is material on P02. Thats why job was getting created. Took care of it. Thanks you very much! July 13, 2025 at 10:31 PM, Mohammad Amir : Dear @FA Could you please check the MLA6076 located at VD AN 4-1_P01 , according to @Gua/ IvancsaFa this plate exists here. And according to our MCS RTD database this plate MLA6076 exists at C1STKA71(0205103),so please check this location as well. And please inform me,it is suspected Duplicated plate issue (magazine seems unique). Thank you very much! July 13, 2025 at 10:32 PM, Mohammad Amir : Dear @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 13, 2025 at 10:33 PM, Mohammad Amir : @Manufacturing @Elena SL Please check C1CNV072_M04 and remove 1+3 carriers from it,it will increase stacking materials delivery speed,there is shortages of Anode materials so please take action on it on priority. Thank you very much! July 13, 2025 at 10:35 PM, Mohammad Amir : @FA Please check C1STKA71_C02 there is Load Oversize error and it is blocking empty magazine delivery and materials recovery. Thank you very much! July 13, 2025 at 10:42 PM, Cao thi my linh : Hello. GF VD AN (5-2 ) #38 need repair, Agv please help us delivery, ok, thank you. July 13, 2025 at 10:42 PM, duzzaman Md (MCS) : On it. Thank you July 13, 2025 at 10:46 PM, duzzaman Md (MCS) : Thank you very much for your patience. Jobs has been created to STK. Please let us know if you need further assistance. Thank you again ! July 13, 2025 at 10:47 PM, Mohammad Amir : @FA Please check C1CNV072_P02 there is data loss error. Please take action on priority. Thank you very much! July 13, 2025 at 10:51 PM, Mohammad Amir : @FA Please take action on it on urgent priority,there is severe shortages of Stacking materials. Thank you very much! July 13, 2025 at 10:52 PM, Mohammad Amir : Dear @FA Please check NC CA RTV 01 ,it is OOS and Reels delivery has stopped. Thank you very much! July 13, 2025 at 10:53 PM, 카스텔 발라지 F.A. : We are working on it ✅ July 13, 2025 at 10:53 PM, 이도형 (Lee) : @FA Nc An agv full magazine check please 5-2, 3-2,2-2 July 13, 2025 at 10:53 PM, 김지수PM(Gyuri)_FA : @송태용(Song tae yong) 지금 대차 몇개있나요? 순환CNV에서 계속 빼야할 듯 합니다 July 13, 2025 at 10:54 PM, 송태용(Song tae yong) : 대차는 많이 있습니다 July 13, 2025 at 10:54 PM, 김지수PM(Gyuri)_FA : 방글라데시분들이랑 순환CNV에서 공트레이좀 빼주심 감사하겠습니다. 명령은 제가 걸겠습니다... July 13, 2025 at 10:56 PM, 김지수PM(Gyuri)_FA : 일단 메뉴얼전환 후, 오토전환 부탁드리겠습니다. July 13, 2025 at 10:57 PM, Elena SL : @FA, please check AGV #8 ST near line 4. the fork position is dangerous July 13, 2025 at 11:00 PM, Mohammad Amir : @FA Please check STKA72_P21(12004) it is in Manual mode hence OOS it is blocking materials recovery, please make it Auto. Thank you very much! July 13, 2025 at 11:00 PM, MJ/ Ivancsa FA : @Mohammad Amir Can you remove task from GF VD AN AGV#03, because chamber has a problem. Maybe somebody informed about it earlier, i am just making it sure, thanks. July 13, 2025 at 11:00 PM, Mohammad Amir : Sure checking! July 13, 2025 at 11:01 PM, Mohammad Amir : @Gua/ IvancsaFa @FA Please check C1CNV072_P02 there is data loss error. Please take action on priority. Thank you very much! July 13, 2025 at 11:01 PM, 김지수PM(Gyuri)_FA : @Mohammad Amir Please increase the priority of 12003track(c1stka71 p21) July 13, 2025 at 11:02 PM, Mohammad Amir : Sure checking! July 13, 2025 at 11:03 PM, Ivan Chobitko : @mcs @fa Please share reason for OOS stoker L6 don’t have anode material Should we request transferring to manual port ? July 13, 2025 at 11:04 PM, Mohammad Amir : @Manufacturing @Elena SL Please check C1CNV072_M04 and remove 1+6 carriers from it,it will increase stacking materials delivery speed,there is shortages of Anode materials so please take action on it on priority. Thank you very much! July 13, 2025 at 11:06 PM, Mohammad Amir : This message was deleted. July 13, 2025 at 11:06 PM, Mohammad Amir : Hello Ivan, There were several issues with CNV072 that's why you are witnessing delay currently as well there is a lot of materials on the CNV so you might face more Delay. If you are facing production delay due to materials shortages,we will release the materials to manual ports of the STK so that you can continue production. We are monitoring extensively the Stacking are and trying to report and solve issue as soon as possible. Thank you very much! July 13, 2025 at 11:08 PM, Mohammad Amir : @FA @Dániel Hufnágel Please check the C1STKA72_P21 ,it is OOS and materials delivery has stopped. Thank you very much! July 13, 2025 at 11:08 PM, duzzaman Md (MCS) : We've deleted the task for the AGV. Thank you very much ! July 13, 2025 at 11:09 PM, Mohammad Amir : @Ivan Chobitko Please let us know ,you need stacking materials on manual ports ? Thank you very much! July 13, 2025 at 11:10 PM, Ivan Chobitko : Yes Send please 5 anode plate July 13, 2025 at 11:10 PM, Mohammad Amir : Sure working on it. July 13, 2025 at 11:11 PM, Mohammad Amir : @FA @Gua/ IvancsaFa Please check C1CNV072_P29 it is OOS . Thank you very much! July 13, 2025 at 11:13 PM, Ivan Chobitko : Tell me please port number July 13, 2025 at 11:13 PM, duzzaman Md (MCS) : We've sent 5 to M01 Thank you so much. July 13, 2025 at 11:14 PM, duzzaman Md (MCS) : *C1STKA72_M01 for your reference. Thank you very much ! July 13, 2025 at 11:17 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 13 CA: 23 Pre-Stk ➤ Notching AN: 00 CA: 10 Pre-Stk ➤ VD AN: 51 CA: 00 Post-Stock ➤ Stacking AN: 23 CA: 110 VD CA (Process Breakdown) UR: 56 Drying: 60 LR: 12 Wait: 00 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 124 LR: 08 Wait: 40 OOS: 16 Sincere thanks for your attention! July 13, 2025 at 11:19 PM, Mohammad Amir : @Manufacturing @Elena SL @Ivan Chobitko Please pay extra attention to C1CNV072_M04 untill stacking materials delivery becomes normal. Currently there are 1+7 materials on the queue. Thank you very much for your assistance.🙏 July 13, 2025 at 11:20 PM, 카스텔 발라지 F.A. : @Péti Gábor kérlek vegyéktek ki ezeket, nagyon lassítja nektek a CV-t July 13, 2025 at 11:21 PM, 김지수PM(Gyuri)_FA : Im creating the job for relieving the stagnant on CNV. Now our member takes out the carriers July 13, 2025 at 11:21 PM, Mohammad Amir : Thank you very much Dear @김지수PM(Gyuri)_FA for your assistance. July 13, 2025 at 11:22 PM, Mohammad Amir : @Dániel Hufnágel Please check C1CNV071(Anode ) side it is again OoS and affecting materials recovery. Thank you very much! July 13, 2025 at 11:24 PM, Mohammad Amir : @Gua/ IvancsaFa Please check C1CNV072_PS5 there is Data mismatch error and it is causing hurdles in materials recovery. Thank you very much! July 13, 2025 at 11:25 PM, Péti Gábor : @Lika July 13, 2025 at 11:27 PM, Mohammad Amir : @FA Please check C1CNV071(Anode) side it is still OOS and affecting materials recovery. Thank you very much! 🙏 July 13, 2025 at 11:31 PM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA For your information:- Now C1CNV071(Anode ) side recovery CNV is Almost empty so I am making the priority to standard form ✅ Thank you very much! 🙏 July 13, 2025 at 11:31 PM, 김지수PM(Gyuri)_FA : Thanks July 13, 2025 at 11:31 PM, Mohammad Amir : You are welcome! July 13, 2025 at 11:40 PM, Mohammad Amir : This message was deleted. July 13, 2025 at 11:41 PM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0CNVC52_RTV1 , there is Run time Over error ,Reels supply has been stopped. Thank you very much! July 13, 2025 at 11:42 PM, Mohammad Amir : @FA Please make C1CNV071_12_036/037 it is in Manual mode and it is blocking materials recovery. Please make it Auto mode. Thank you very much! July 13, 2025 at 11:43 PM, Ivan Chobitko : This plates still coming ? July 13, 2025 at 11:44 PM, Mohammad Amir : No at the moment all the materials have been removed. Thank you! July 13, 2025 at 11:46 PM, 김지수PM(Gyuri)_FA : @fa Please check the location of VC04 an vd > because of this agv transferring has been delaying July 13, 2025 at 11:47 PM, Ivan Chobitko : Thank you so much for your assistance July 13, 2025 at 11:47 PM, Mohammad Amir : You are most welcome! July 13, 2025 at 11:48 PM, Ivan Kasian Sl 5L 🥹 : @Mohammad Amir send me 6 ea anode plate please for st July 13, 2025 at 11:48 PM, Mohammad Amir : Sure, working on it. July 13, 2025 at 11:48 PM, Ivan Kasian Sl 5L 🥹 : Thank you July 13, 2025 at 11:49 PM, Mohammad Amir : You are welcome! July 13, 2025 at 11:51 PM, Mohammad Amir : Hello, We have released manually 6 stacking Anode materials to fulfill production demand. ✅ Please collect it from the C1STKA72_M01. Feel free to contact MCS/RTD team immediately if you face production delays because of materials shortages. Thank you very much! July 13, 2025 at 11:57 PM, Mohammad Amir : Dear @All, For your kind information: Now,Stacking materials delivery to line 1&2&3&4&5&6 has been normalized. ✅ AGV#9 &#8 on the way to Line 3. AGV#7 &#3 #2 #5 on the way to line -2. Also,two materials on the way to line-6 and 2 materials on the way lien -5 and one material on the way to line -4. ✅ We are monitoring. Thank you very much everyone for your assistance. July 14, 2025 at 12:01 AM July 14, 2025 at 12:01 AM, Anastasiia : Sorry, there is also a big shortage of anode material on line 1, please check 🙏 July 14, 2025 at 12:03 AM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv072 16159track July 14, 2025 at 12:06 AM, Mohammad Amir : Yes ,we are monitoring. Currently there is one material CA on the way to line -1 on AGV#8 ✅. There was issue but now everything seems okay so slowly you will receive the materials. Thank you very much! July 14, 2025 at 12:07 AM, Anastasiia : Okay, thanks) July 14, 2025 at 12:08 AM, Mohammad Amir : You are welcome! July 14, 2025 at 12:08 AM, Mohammad Amir : @FA @Gua/ IvancsaFa Please check C1CNV072_16_155/159 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 14, 2025 at 12:11 AM, Mohammad Amir : Please also check 16126/128 it is OoS and blocking stacking materials delivery further. Thank you very much! July 14, 2025 at 12:17 AM, Nguyen Huy : @Mohammad Amir Hello, are there any problem with AGV on the VD AN side? L4, 5, 6 VD are waiting to be pick up for a long time, please solve it asap because AN materials for ST are lacking, thank you in advance July 14, 2025 at 12:17 AM, Mohammad Amir : Hello, Checking! July 14, 2025 at 12:19 AM, duzzaman Md (MCS) : @FA Please check C1STKA71_C02 there is Load Oversize error . Thank you very much! July 14, 2025 at 12:19 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 25 CA: 26 Pre-Stk ➤ Notching AN: 12 CA: 21 Pre-Stk ➤ VD AN: 62 CA: 01 Post-Stock ➤ Stacking AN: 16 CA: 77 VD AN (Process Breakdown) UR: 72 Drying: 16 LR: 24 Wait: 00 OOS: 08 VD CA (Process Breakdown) UR: 00 Drying: 116 LR: 04 Wait: 28 OOS: 16 Sincere thanks for your attention! July 14, 2025 at 12:23 AM, Nguyen Huy : @FA AGV #10 errror near VD AN 5-2, pls check July 14, 2025 at 12:23 AM, Dániel Hufnágel : @Mohammad Amir check please GF VD line#4-5-6 at anode side please! Its important July 14, 2025 at 12:23 AM, Mohammad Amir : @FA @Gua/ IvancsaFa Please check VD AGV #10 AN it is in Manual mode. ,it is blocking AGV#7,#9,#8&#10 Ans resulting delays in materials travfer to post VD. Thank you very much! July 14, 2025 at 12:24 AM, Ivan Kasian Sl 5L 🥹 : @fa check pls cv010 Tray id data missmatch July 14, 2025 at 12:24 AM, Ivan Kasian Sl 5L 🥹 : Stack July 14, 2025 at 12:24 AM, Mohammad Amir : @Dániel Hufnágel This is the issue please check on priority. Thank you very much! July 14, 2025 at 12:27 AM, Mohammad Amir : @Nguyen Huy , Hello, We have UR successfull from 5-4 (AGV#8 assigned) ,4-7(AGV#3) 5-2(AGV#10 assigned) 4-4(AGV#7 assigned) And from 4-8,6-8,4-6,5-1,4-9. ✅ But due to this issue you are witnessing delay ,I have informed the FA team about it. Thank you very much! July 14, 2025 at 12:29 AM, Mohammad Amir : @Gua/ IvancsaFa @카스텔 발라지 F.A. Please check C1CNV072_P33 there is data loss error and it is blocking stacking materials delivery. Please check the issue on priority. Thank you very much! July 14, 2025 at 12:30 AM, Mohammad Amir : Update: Now issue has resolved ✅. And AGV has started to pick materials from VD AN 4-5-6 lines. Thank you very much! July 14, 2025 at 12:34 AM, Ivan Kasian Sl 5L 🥹 : This message was deleted. July 14, 2025 at 12:37 AM, Péti Gábor : Hi! I understand that the AGV is unloading the machines now, but the VDs on Line 4-5-6 are not working because they have no mgz! The AGV is not loading them!!! And we are stopping at Stackingen because there is no raw material??? What's wrong???? July 14, 2025 at 12:50 AM, 카스텔 발라지 F.A. : @Mohammad Amir Hello! Please check GF VD AN 2-6 chamber. It's full of material. And also check please the GF VD AN Line 4-5-6 LR status Thank you very much! July 14, 2025 at 12:50 AM, duzzaman Md (MCS) : Checking. Thank you July 14, 2025 at 12:51 AM, Dániel Hufnágel : @Mohammad Amir please if you can check this by MES side because this issue still not solved July 14, 2025 at 12:51 AM, Mohammad Amir : I am checking! July 14, 2025 at 12:54 AM, duzzaman Md (MCS) : Could you confirm if P03 is empty or full ? Is MLA6076 there ? According to MCS , P03 is empty. Thank you very much ! July 14, 2025 at 12:55 AM, Mohammad Amir : Dear @Dániel Hufnágel @카스텔 발라지 F.A. @Péti Gábor We have Loads request from line 4-5&6 however due to AGV blocking all the tasks for delayed including the LR jobs for Line4&5&6 , currently materials are in the STK and waiting to go to VD but all AGVs are busy. I am examining in depth if I see any issue. Thank you very much! July 14, 2025 at 12:55 AM, Nguyen Huy : The plate is still inside July 14, 2025 at 12:56 AM, Nguyen Huy : Should i press UR again ? July 14, 2025 at 12:56 AM, Mohammad Amir : I am prioritising the LR jobs so that situation can be normalized as well for LR. Thank you very much! July 14, 2025 at 12:58 AM, duzzaman Md (MCS) : Thank you. Just to make sure. So,please reconfirm MLA6067 is there physically at P03 as according to MCS carrier MLA6076 is at C1STKA71_0100103.. Thank you very much ! July 14, 2025 at 12:59 AM, Elena SL : @Mohammad Amir Anode material is not supplied to the 4th stacking line. Please check the order. Thank you July 14, 2025 at 12:59 AM, Mohammad Amir : Sure,Checking. July 14, 2025 at 1:00 AM, Zsurbej Zsolt F.A. : there it is MLA6067 P03 July 14, 2025 at 1:01 AM, Mohammad Amir : Could you please check C1STKA71(0100103) and confirm ? It is a suspected duplicated case . Thank you very much! July 14, 2025 at 1:02 AM, Elena SL : 4/18,4/17,4/14,4/13,4/10,4/9,4/19,4/20,4/15,4/8,4/3,4/4 not have AN material July 14, 2025 at 1:02 AM, Nguyen Huy : One moment pls July 14, 2025 at 1:03 AM, Nguyen Huy : This carrier still at P03 July 14, 2025 at 1:05 AM, Mohammad Amir : Currently AGV# 2 on the way to the way to 4-19 with MLA6319 ✅. There is LR from all the machines but currently there is no material available at the O/P ports of the CNV that's why you are witnessing delays. Currently materials are also transferring to line 5&6. Thank you very much! July 14, 2025 at 1:06 AM, Péti Gábor : Please send this report every hour! Thank you very much! July 14, 2025 at 1:06 AM, Mohammad Amir : Sure ,we will share. Thank you very much! July 14, 2025 at 1:06 AM, duzzaman Md (MCS) : Thank you for confirming July 14, 2025 at 1:07 AM, duzzaman Md (MCS) : Please check and confirm. Thank you very much ! July 14, 2025 at 1:09 AM, Zsurbej Zsolt F.A. : C1STKA71(0100103) --> MLA0006 July 14, 2025 at 1:10 AM, Mohammad Amir : Thank you very much for the confirmation! July 14, 2025 at 1:11 AM, Anastasiia : @all AGV#9 is stuck near 1/4 ST. Please check. Thanks July 14, 2025 at 1:12 AM, Mohammad Amir : Dear @Zsurbej Zsolt F.A. Sorry,Could you please check C1STKA72(0100103) and confirm as well ? Thank you very much! July 14, 2025 at 1:12 AM, Anastasiia : @Mohammad Amir July 14, 2025 at 1:13 AM, duzzaman Md (MCS) : @Gua/ IvancsaFa Kindly check. Thank you very much ! July 14, 2025 at 1:14 AM, Mohammad Amir : This message was deleted. July 14, 2025 at 1:14 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 26 CA: 36 Pre-Stk ➤ Notching AN: 10 CA: 21 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 29 CA: 69 VD AN (Process Breakdown) UR: 44 Drying: 24 LR: 32 Wait: 00 OOS: 08 VD CA (Process Breakdown) UR: 20 Drying: 100 LR: 12 Wait: 36 OOS: 12 Sincere thanks for your attention! July 14, 2025 at 1:20 AM, Mohammad Amir : @Dániel Hufnágel We are managing VD AN section however there are several LR and UR jobs and all AGVs are busy so that's why you might face delays. I am prioritising LR currently. Thank you very much! July 14, 2025 at 1:21 AM, Dániel Hufnágel : Thank you so much! July 14, 2025 at 1:21 AM, Mohammad Amir : You are most welcome! July 14, 2025 at 1:21 AM, Zsurbej Zsolt F.A. : C1STKA72(0100103)--> MLA6076 Yes, It is a duplicate case . July 14, 2025 at 1:26 AM, Mohammad Amir : @Manufacturing @MES @최명운(CHOI MYOUNGWOON) Hello, We have received confirmation from @Zsurbej Zsolt F.A. And @Nguyen Huy that MLA6076 located at VD AN 2-6_P03 and at C1STKA72(0100103 ) both places. It is a duplicate case ,so please MLA6076 located in VD ,let the VD complete for it and the carrier MLA6076 -C1STKA72(0100103) , please rack it out and please print a new barcode for this one. Thank you very much! July 14, 2025 at 1:29 AM, 김지수PM(Gyuri)_FA : @제조 순환CNV이슈로 인해, 전창고 > VD 반송이 지연이되고 있습니다. 우선순위 조정을 통해 최대한 빠르게 공급하도록 하겠습니다. July 14, 2025 at 1:34 AM, 김지수PM(Gyuri)_FA : @Gua/ IvancsaFa could you please check the 5-2 an vd chamber? I can see just 2 carriers located p03 p02 July 14, 2025 at 1:36 AM, Ivan Chobitko : @mcs please increase priority for L4-5-6 Anode ST L6 again almost empty ( July 14, 2025 at 1:37 AM, Mohammad Amir : Sure, i am prioritising. Thank you very much! July 14, 2025 at 1:38 AM, Nguyen Huy : @Mohammad Amir @duzzaman Md (MCS) Since there were lots of LR and UR which caused delays , i suggest that we focus on the UR first and then LR for now, because ST need materials July 14, 2025 at 1:39 AM, Mohammad Amir : Sure,we are already managing. Thank you very much! July 14, 2025 at 1:39 AM, MJ/ Ivancsa FA : Yes, there are 2 carriers located p03,p02. July 14, 2025 at 1:39 AM, MJ/ Ivancsa FA : @김지수PM(Gyuri)_FA July 14, 2025 at 1:39 AM, Ivan Chobitko : Thank you too July 14, 2025 at 1:39 AM, 김지수PM(Gyuri)_FA : Thanks! July 14, 2025 at 1:40 AM, 방혁 PM(Bang.Hyuk) FA : @제조 순환물류/후창고 이슈로 인해서 반송이 계속해서 늦어질것같습니다. 수동 반송할수있도록 준비하겠습니다 July 14, 2025 at 1:40 AM, Mohammad Amir : Hello, Now, AGV#4&6 on the way to Line-6 ✅ AGV#10&#1&#8 on the way to Line-4 ✅ AGV#9 on the way to Line-5 ✅. Thank you very much! July 14, 2025 at 1:41 AM, Mohammad Amir : You are welcome! July 14, 2025 at 1:42 AM, Ivan Chobitko : Please send 12 anode plate to manual port for ST July 14, 2025 at 1:42 AM, Mohammad Amir : Sure, we are sending it. Thank you very much! July 14, 2025 at 1:42 AM, 방혁 PM(Bang.Hyuk) FA : @Mohammad Amir Please order 20 CA/AN materials to go out to the manual port July 14, 2025 at 1:43 AM, Mohammad Amir : Sure ,we are sending now. Thank you very much! July 14, 2025 at 1:50 AM, duzzaman Md (MCS) : 20 CA materials sent to C1STCKC72_M01 port. Thank you very much! July 14, 2025 at 1:51 AM, Mohammad Amir : Dear @방혁 PM(Bang.Hyuk) FA We have also released 20 AN materials as well please collect it from the manual ports of the STKA72. Thank you very much! July 14, 2025 at 1:52 AM, Mohammad Amir : Dear @All, For your kind information: Currently we don't have any AN materials left in warehouse so that's why you might face delays in AN stacking materials delivery. Thank you very much! July 14, 2025 at 1:55 AM, 조범희 : @Mohammad Amir Please check July 14, 2025 at 1:55 AM, Mohammad Amir : @FA @카스텔 발라지 F.A. Please check E0CNVC52_RTV1 , iy is OOS,Reels supply has been stopped. Thank you very much! July 14, 2025 at 1:55 AM, Mohammad Amir : Sure, checking! July 14, 2025 at 1:55 AM, Dániel Hufnágel : He s working there July 14, 2025 at 1:55 AM, Dániel Hufnágel : It will take time July 14, 2025 at 1:55 AM, Mohammad Amir : Thank you very much for the confirmation! July 14, 2025 at 1:59 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 28 CA: 39 Pre-Stk ➤ Notching AN: 12 CA: 18 Pre-Stk ➤ VD AN: 43 CA: 02 Post-Stock ➤ Stacking AN: 01 CA: 81 VD AN (Process Breakdown) UR: 32 Drying: 20 LR: 32 Wait: 00 OOS: 08 VD CA (Process Breakdown) UR: 00 Drying: 108 LR: 08 Wait: 60 OOS: 12 Sincere thanks for your attention! July 14, 2025 at 2:08 AM, 조범희 : Please cancel all Job 1,2,3Line Stack July 14, 2025 at 2:08 AM, Mohammad Amir : Sure, working on it. July 14, 2025 at 2:09 AM, Mohammad Amir : Sir, All jobs have been cancelled successfully ✅. Feel free to contact me if you need any further assistance. Thank you very much! July 14, 2025 at 2:10 AM, 이도형 (Lee) : @FA PM님 음극 로봇에 오븐플레이트 없어서 풀매거진 투입 못하고 있습니다. 원활하게 부탁드립니다. July 14, 2025 at 2:26 AM, Péti Gábor : Dear Everyone! L1-L2-L3 have already stopped due to AN raw material shortage! The problem is still not solved! In the morning, our other three lines will also stop due to AN shortage! @Mohammad Amir @심재훈 @Dániel Hufnágel @Lajos Tihor July 14, 2025 at 2:33 AM, Mohammad Amir : Dear @Péti Gábor Currently we have 22 materials Anode for Stacking. Regarding VD AN, For your information:- Currently almost all UR jobs have been completed as we prioritised UR job ,only UR job for 3-4 VD AN left and AGV#6 and #1 on the way with Anode Materials to Post VD STK Afterwards there are only LR jobs left so AGVs will carry on these tasks. Due to severe shortages of AN materials you are witnessing delay in Anode materials delivery to line1-2-3. Thank you very much! July 14, 2025 at 2:37 AM, Ivan Kasian Sl 5L 🥹 : @Mohammad Amir Now since lines 1-2-3 are stopped, we don't need to continue the material manually from the port m01 Please cancel the issuance if it will be done automatically using AGV July 14, 2025 at 2:37 AM, Mohammad Amir : Sure, checking! July 14, 2025 at 2:38 AM, Ivan Kasian Sl 5L 🥹 : Thank you so much, dear Amir July 14, 2025 at 2:39 AM, Mohammad Amir : Dear Ivan, All jobs have been cancelled successfully now these materials as well can be used automatically using AGV ✅ Thank you very much! July 14, 2025 at 2:39 AM, MJ/ Ivancsa FA : @Mohammad Amir Can you remove or relocate task from GF VD AN, AGV#9, because chamber 6-1’s sensor is broken. July 14, 2025 at 2:39 AM, Mohammad Amir : Sure, checking! July 14, 2025 at 2:40 AM, MJ/ Ivancsa FA : Thank you for your cooperation July 14, 2025 at 2:41 AM, Ivan Kasian Sl 5L 🥹 : Thank you so much When we need it again, I'll ask you about it. Thanks again July 14, 2025 at 2:43 AM, Mohammad Amir : Sure ,we are glad to assist you. Feel free to contact us anytime. Thank you very much! July 14, 2025 at 2:44 AM, duzzaman Md (MCS) : Cancelled and sent back to stk. Thank you very much for your cooperation. Have a good rest of the worl. July 14, 2025 at 2:46 AM, duzzaman Md (MCS) : @MJ/ Ivancsa FA For your reference. Thank you ! July 14, 2025 at 2:50 AM, Ivan Kasian Sl 5L 🥹 : You too 😁 July 14, 2025 at 2:52 AM, Ivan Kasian Sl 5L 🥹 : @fa please check agv 2 near line 5.3 stack July 14, 2025 at 2:53 AM, Ivan Kasian Sl 5L 🥹 : Acs emergency 02:48 July 14, 2025 at 3:02 AM, Mohammad Amir : This message was deleted. July 14, 2025 at 3:07 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 51 CA: 00(STKC51 is OOS) Pre-Stk ➤ Notching AN: 15 CA: 07 Pre-Stk ➤ VD AN: 28 CA: 03 Post-Stock ➤ Stacking AN: 19 CA: 101 VD AN (Process Breakdown) UR: 00 Drying: 44 LR: 132 Wait: 00 OOS: 08 VD CA (Process Breakdown) UR: 18 Drying: 116 LR: 12 Wait: 44 OOS: 12 Sincere thanks for your attention! July 14, 2025 at 3:21 AM, 김지수PM(Gyuri)_FA : @이도형 (Lee) 음극 2-9 6-1 >홀수 챔버는 VD에 풀매거진 최대한 채우고, 전창고에 자재없을때 해결하도록 하겠습니다. July 14, 2025 at 3:35 AM, 김지수PM(Gyuri)_FA : @fa Please check VC07 an VD thanks July 14, 2025 at 3:40 AM, duzzaman Md (MCS) : @FA Please check E0CNVC52_RTV1 , it is OOS,Reels supply has been stopped. Thank you very much! July 14, 2025 at 4:00 AM, 김지수PM(Gyuri)_FA : This message was deleted. July 14, 2025 at 4:01 AM, 김지수PM(Gyuri)_FA : 음극 VD 홀수챔버 정리완료하였습니다. July 14, 2025 at 4:02 AM, Mohammad Amir : @FA Please confirm if there is any maintenance going on C1CNV072 ,it is OOS and it is blocking stacking materials delivery to Stacking line 4&5&6. Thank you very much! July 14, 2025 at 4:06 AM, Dániel Hufnágel : Yes, but it take few min only July 14, 2025 at 4:07 AM, Mohammad Amir : Thank you very much for the confirmation! July 14, 2025 at 4:07 AM, Dániel Hufnágel : Next time i will mention you, sorry im little busy right now July 14, 2025 at 4:08 AM, Mohammad Amir : No issue Dániel,I am just extra focusing on the Stacking area to make sure ,we will not have materials delivery delay. Thank you very much! July 14, 2025 at 4:10 AM, Dániel Hufnágel : Yes, thanks for your job! July 14, 2025 at 4:10 AM, Mohammad Amir : You are most welcome! Thank you very much for your hard work as well. July 14, 2025 at 4:16 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 69 CA: 58 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 65 CA: 01 Post-Stock ➤ Stacking AN: 01 CA: 110 VD AN (Process Breakdown) UR: 00 Drying: 100 LR: 74 Wait: 00 OOS: 08 VD CA (Process Breakdown) UR: 00 Drying: 116 LR: 04 Wait: 40 OOS: 12 Thank you very much! July 14, 2025 at 4:53 AM, Mohammad Amir : @FA Please check C1STKA71_C02 there is Fork #1 load position error And it is blocking empty magazine delivery. Thank you very much! July 14, 2025 at 5:03 AM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 70 CA: 59 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 78 CA: 02 Post-Stock ➤ Stacking AN: 11 CA: 108 VD AN (Process Breakdown) UR: 06 Drying: 132 LR: 62 Wait: 04 OOS: 08 VD CA (Process Breakdown) UR: 36 Drying: 112 LR: 04 Wait: 40 OOS: 12 Thank you very much! July 14, 2025 at 6:20 AM, Shakir (MCS) : Good morning @All @FA Please check E0STKC51_C01 there is Port interface Error . Thank you July 14, 2025 at 6:29 AM, 조한진(Jin) : Hello. Re Check Please. Thank you. July 14, 2025 at 6:29 AM, Shakir (MCS) : Hello, Good morning Checking July 14, 2025 at 6:32 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 80 CA: 02 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 92, CA: 00 Post-Stock ➤ Stacking AN: 00, CA: 139 VD AN (Process Breakdown) UR: 04, Drying: 196, LR: 00, Wait: 00, OOS: 08 VD CA (Process Breakdown) UR: 54, Drying: 116, LR: 04, Wait: 60, OOS: 12 July 14, 2025 at 6:35 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 10 Technician, 1 Sl ———————————— Electrode (2): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 14, 2025 at 7:04 AM, Shakir (MCS) : @FA Please check Robot 1, C0PVA010 is OOS. Thank you July 14, 2025 at 7:13 AM, Natsag/ Ivansca FA : @MCS VD AN chamber 1-4 empty. Please delete AGV#4 job. Thank you! July 14, 2025 at 7:14 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 76 CA: 38 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 85, CA: 00 Post-Stock ➤ Stacking AN: 06, CA: 138 VD AN (Process Breakdown) UR: 12, Drying: 168, LR: 04, Wait: 00, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 104, LR: 04, Wait: 56, OOS: 12 Thank you July 14, 2025 at 7:15 AM, Shakir (MCS) : Good morning Working on it, Thanks July 14, 2025 at 7:17 AM, Shakir (MCS) : VD 1-4 AN AGV04 Job have been cancelled successfully ✅ Thank you July 14, 2025 at 7:22 AM, Shakir (MCS) : @FA Please check AN reel RTV Position alarm. Thank you July 14, 2025 at 7:23 AM, Shakir (MCS) : E0CNVA52_RTV July 14, 2025 at 7:27 AM, Hữu Thắng : @FA C1STKA71 Alarm : Data missmatch . can you please chekc it . Thank you July 14, 2025 at 7:29 AM, Dariimaa/다리마/Ivancsa : Solved July 14, 2025 at 7:29 AM, Hữu Thắng : Agv#10 VD AN Line 4 has an error while unloading full amagzines . July 14, 2025 at 7:53 AM, Mr.Miti (미티) FA : 1. Elõfordulás dátuma: 2025.07.13 18:00 2. Eljárás/berendezés: 1F Assembly Notching Robot#6 3. Hiba részletei: Amint a Maste Job elindul a program nem képes lefutni, 21 -es sor TOOLOF hibát ír! A gép szerszámát parancsal lehet mozgatni (parancssorral), viszont Master Job-ban nem képes elindítani. 4. Megkereső osztály: F.A 5. Valószínű ok: Program hiba keletkezett, pontos oka nem lett meg 6. Az akció részletei:Program és szerszám átvizsgálása, rendelleneséget nem találtunk. 7. Kérés: A külső cég July 14, 2025 at 7:54 AM, 최명운(CHOI MYOUNGWOON) : @FA technician Please come to GF An VD4-2. July 14, 2025 at 8:21 AM, 김동섭 : AN VD 4-5 P2 plate is not seated properly. Please re-position the AGV July 14, 2025 at 8:22 AM, Shakir (MCS) : @FA Please check C1STKC71_M01 error: Data missmatch Thank you July 14, 2025 at 8:23 AM, 김지수PM(Gyuri)_FA : @Shakir (MCS) Could you please check the reason why transport job was terminated? MLA6239(C1VDA040_P02) 7:00:36 Transferring from vd to agv was completed but right after agv received the carriers, job of mla6239 was terminated. So even if there were 2 carriers located in agv but in data we could see there was just only 1 carrier in that agv. And it caused some problem July 14, 2025 at 8:23 AM, Shakir (MCS) : Hello Good morning Checking July 14, 2025 at 8:25 AM, 김지수PM(Gyuri)_FA : I requested for checking this issue, and staff from yaskawa will check it. Thanms July 14, 2025 at 8:26 AM, 조한진(Jin) : Re Check Please. July 14, 2025 at 8:26 AM, 김동섭 : Please unload AN VD 6-1 P3. July 14, 2025 at 8:27 AM, P.Bence A SSL : Check please again . July 14, 2025 at 8:27 AM, Shakir (MCS) : Checking July 14, 2025 at 8:31 AM, 김동섭 : AN VD 4-5 P2 plate is not seated properly. Please re-position the AGV July 14, 2025 at 8:31 AM, 김현태 : Please send VD AN 6-1 #46 P03 to STK72 July 14, 2025 at 8:40 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 67 CA: 28 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 78, CA: 01 Post-Stock ➤ Stacking AN: 01, CA: 148 VD AN (Process Breakdown) UR: 12, Drying: 116, LR: 16, Wait: 00, OOS: 08 VD CA (Process Breakdown) UR: 16, Drying: 92, LR: 08, Wait: 72, OOS: 08 Thank you July 14, 2025 at 8:40 AM, Sazzad Bhai SKon : @FA Please check the UNKDUP carrier MLA6076 (C1STKA72, 0100401) July 14, 2025 at 8:40 AM, 김동섭 : AN VD 4-5 P2 plate is not seated properly. Please re-position the AGV July 14, 2025 at 8:46 AM, 김동섭 : AGV@MCS@ Please help me. Please re-install AN VD 4-5P2 AGV. July 14, 2025 at 8:46 AM, Hữu Thắng : @MCS Can you please check UR VD AN 3/7 - 3/9 4/4 4/7 4/8 5/3 5/4 6/3 6/4 6/6 July 14, 2025 at 8:46 AM, 김정희(Jeong hee FA) invited 윤정은. July 14, 2025 at 8:47 AM, Shakir (MCS) : Working on it Thank you July 14, 2025 at 8:47 AM, Shakir (MCS) : Checking July 14, 2025 at 8:51 AM, Shakir (MCS) : Hello, Do you want to transfer plate to Post VD STKA72 ? Need confirmation Thank you July 14, 2025 at 8:53 AM, Hữu Thắng : No no Shakir. @FA VD AN 4/5 The plate is wrong postion . Could you please use AGV to fix position . Thank you! July 14, 2025 at 8:53 AM, Dariimaa/다리마/Ivancsa : Work is created. All AGVs are busy. July 14, 2025 at 8:56 AM, Hữu Thắng : @MCS There’s 1 plate on VD AN 6/1 . Can you transfer MLA4146 to C1STKA72 . Thanks July 14, 2025 at 8:56 AM, Shakir (MCS) : Sure, working on it Thank you July 14, 2025 at 8:56 AM, Hữu Thắng : VD AN agv#2 error . Plz check it July 14, 2025 at 8:58 AM, 김현태 : NC AN AGV #6 error Thanks July 14, 2025 at 9:00 AM, Dariimaa/다리마/Ivancsa : Solved July 14, 2025 at 9:00 AM, Dariimaa/다리마/Ivancsa : Solved July 14, 2025 at 9:00 AM, Shakir (MCS) : According to MCS/ACS VD 6-1 AN empty. there is no plate inside Vs chamber. Thank you July 14, 2025 at 9:13 AM, 김동섭 : Plate ID MLA4146 exists. July 14, 2025 at 9:15 AM, Shakir (MCS) : @Dariimaa/다리마/Ivancsa Could you please transfer to post VD. Thank you July 14, 2025 at 9:24 AM, Hữu Thắng : This message was deleted. July 14, 2025 at 9:39 AM, Shakir (MCS) : For VD chamber 3/7 ,3/9, 4/7,5/3,5/4: UR successfully completed, now chamber empty we received LR. Sorry for late reply I was busy with other tasks Thank you July 14, 2025 at 9:40 AM, P.Bence A SSL : Check again please thank you . July 14, 2025 at 9:51 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir please share available lot July 14, 2025 at 9:51 AM, Shakir (MCS) : Checking sir July 14, 2025 at 9:55 AM, Shakir (MCS) : @P.Bence A SSL GF Next Lot Quantity Availability GF NC Reel Available AN: 75 CA: 47 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 49, CA: 03 Post-Stock ➤ Stacking AN: 20, CA: 158 VD AN (Process Breakdown) UR: 16, Drying: 68, LR: 28, Wait: 00, OOS: 08 VD CA (Process Breakdown) UR: 32, Drying: 84, LR: 08, Wait: 60, OOS: 20 Thank you July 14, 2025 at 10:11 AM, 전 운 (Jeon Woon) : @FA Please Check An ST C/V plate not moving July 14, 2025 at 10:12 AM, 전 운 (Jeon Woon) : @Jun(정우준)_SKOH FA 이거 물동량 꼬인거 같은데요 확인좀 해주세요… July 14, 2025 at 10:15 AM, Dariimaa/다리마/Ivancsa : @FA tech VD AN C1STKA72 crane error. Please check it Thank you! July 14, 2025 at 10:15 AM, Jun(정우준)_SKOH FA : @Mr.Miti (미티) FA @지석범PM (이반차FA) 확인 부탁드립니다~!! July 14, 2025 at 10:17 AM, Mr.Miti (미티) FA : Solved July 14, 2025 at 10:31 AM, KIM SEYEON [김세연]_FA : @Mohammad Amir ) please share available lot July 14, 2025 at 10:32 AM, Shakir (MCS) : Checking sir Thank you July 14, 2025 at 10:37 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 68 CA: 40 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 41, CA: 00 Post-Stock ➤ Stacking AN: 29, CA: 181 VD AN (Process Breakdown) UR: 28, Drying: 60, LR: 32 Wait: 00, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 80, LR: 20, Wait: 88, OOS: 20 Thank you July 14, 2025 at 10:53 AM, Hữu Thắng : @MCS Could you please check VD AN only 2 plate 5/8 - 5/4 - 4/8 4/3 1/9 July 14, 2025 at 10:54 AM, Shakir (MCS) : Working on it July 14, 2025 at 10:57 AM, 김동섭 : CA VD 1-3 P4 plate is not seated properly. Please re-install with AGV July 14, 2025 at 10:57 AM, 박강민 : CA VD 2-3 좌측하단 플레이트 안착불량 입니다. AGV 재안착 부탁드립니다. July 14, 2025 at 11:05 AM, Shakir (MCS) : For VD Chamber 5-8 : AGV09 assigned and on the way. 5-4 : Waiting for AGV, all AGVs are busy 4:8,1-9 : Job initiated 4:3 : All output ports of STKA71 are busy, waiting for free port. Currently there are many LR received from different VD chamber but job are alternated because of all outbound ports of STKA71 busy and also all AGVs are busy doing UR and LR. Thank you July 14, 2025 at 11:07 AM, Hữu Thắng : Thank you very much ! July 14, 2025 at 11:07 AM, Shakir (MCS) : You’re welcome July 14, 2025 at 11:09 AM, 조수형팀장 SKO/FA운영팀 : 음극 노칭 Agv 알람 봐 주세요 Rear rsl detect 길막중입니다. July 14, 2025 at 11:12 AM, Hữu Thắng : @FA NC AN AGV#4 stopped . Plz check it July 14, 2025 at 11:15 AM, Nadiia Arkhipova : Line 6 Stk 9 Agv Machine #8 stopped, please check July 14, 2025 at 11:20 AM, Dariimaa/다리마/Ivancsa : Solved July 14, 2025 at 11:40 AM, waseem/ Iváncsa Fa : This message was deleted. July 14, 2025 at 11:41 AM, Natsag/ Ivansca FA : VD AN chamber2-1 LD/UD alarm pls check Thank you. July 14, 2025 at 11:41 AM, waseem/ Iváncsa Fa : In An VD stk1 have an error need help July 14, 2025 at 11:42 AM, waseem/ Iváncsa Fa : Solved thank you July 14, 2025 at 11:57 AM, Hữu Thắng : Could you please share it again . Thank you July 14, 2025 at 11:58 AM, Shakir (MCS) : Checking July 14, 2025 at 12:02 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 77 CA: 49 Pre-Stk ➤ Notching AN: 01, CA: 00 Pre-Stk ➤ VD AN: 07, CA: 01 Post-Stock ➤ Stacking AN: 64, CA: 179 VD AN (Process Breakdown) UR: 16, Drying: 76, LR: 60 Wait: 08, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 96, LR: 04, Wait: 80, OOS: 20 Thank you July 14, 2025 at 12:10 PM, Dariimaa/다리마/Ivancsa : VD AN 6-8 chamber LD/UD alarm. Please check Thank you! July 14, 2025 at 12:19 PM, Shakir (MCS) : @FA Please check C1STKA71_C02 there is SCP Main Power CP Trip. Thank you July 14, 2025 at 12:24 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 75 CA: 59 Pre-Stk ➤ Notching AN: 01, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 01 Post-Stock ➤ Stacking AN: 82, CA: 176 VD AN (Process Breakdown) UR: 00, Drying: 72, LR: 56 Wait: 24, OOS: 08 VD CA (Process Breakdown) UR: 04, Drying: 92, LR: 08, Wait: 84, OOS: 20 Thank you July 14, 2025 at 12:29 PM, Hồng Anh SL NC&VD 1F : @Mohammad Amir hello sir, Can you pls help me check the plate list below pls? I saw that plate stay in warehouse long time : AN : MLA4060 MLA6037 MLA1145 MLA4184 MLA6224 CA MLC2154 July 14, 2025 at 12:30 PM, Shakir (MCS) : Sure, Checking Thank you July 14, 2025 at 12:30 PM, Hữu Thắng : @FA AGV#9 stopped in VD AN 6-8 . Plz check it . Thank you July 14, 2025 at 12:40 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check GF C1STKA71 C02 CP down please recovery it quickly July 14, 2025 at 12:59 PM, Dariimaa/다리마/Ivancsa : @김동섭 VD AN 6-8 chamber LD/UD alarm. Please check Thank you! July 14, 2025 at 1:11 PM, Shakir (MCS) : For MLA4060 and MLA1145: lot count is 5 it should be 6 For MLA6037 : Job exist for VD1-9 For MLA4184, MLC2154 & MLA6224: Plate on Hold state. Because above reason plates are not count under available lot Thank you July 14, 2025 at 1:19 PM, 김동섭 : AN VD 6-8 #AGV#9 Product appears to have no magazine ID July 14, 2025 at 1:20 PM, 김동섭 : Please check July 14, 2025 at 1:29 PM, 김동섭 : AN VD 6-8 MES Message 213 Magazine Lot ID does not exist Please confirm, this is AGV NO #9 July 14, 2025 at 1:31 PM, Sazzad Bhai SKon : AGV has fork LD/UD error. MCS job Is okay. @FA please check this AGV July 14, 2025 at 1:32 PM, Natsag/ Ivansca FA : @ mcs Please cancel the work and send it to stka72. The chamber is broken. July 14, 2025 at 1:34 PM, Sazzad Bhai SKon : Sent to post VD STK July 14, 2025 at 1:35 PM, Mr.Miti (미티) FA : Solved July 14, 2025 at 1:38 PM, Hồng Anh SL NC&VD 1F : Thank you for checked! But may can j know why MLA4184 , MlC2154 and MLA6224 on Hold state pls? I checked Mes information and seems like normal July 14, 2025 at 1:39 PM, Shakir (MCS) : Checking July 14, 2025 at 1:50 PM, Shakir (MCS) : There are three reasons for hold 1) duplicate magazine id, 2: duplicate plate id, 3: UNK These materials on Hold state from RTD side that is why it cannot be transported.As i checked there is no duplicated mgz exist so these Hold status can be released. Unfortunately I don't have permission to release hold state. If you please write an IT tickets then our seniors will reflect on it. Thank you July 14, 2025 at 1:52 PM, 지석범PM (이반차FA) : Please send MLA4113 also AGV#9 have a plate July 14, 2025 at 1:54 PM, Sazzad Bhai SKon : Sent back to post VD STK July 14, 2025 at 1:56 PM, Hồng Anh SL NC&VD 1F : Ah yes. I will write the IT ticket for this issue. Thank you for check! July 14, 2025 at 2:00 PM, Shakir (MCS) : You’re welcome July 14, 2025 at 2:09 PM, Hồng Anh SL NC&VD 1F : @FA @MCS can you pls check for manual port M02 C1STKA72 pls.? I wanna input plate MLA4060 to wh but MCS buzzer alarm. Pls check! July 14, 2025 at 2:10 PM, Shakir (MCS) : Checking July 14, 2025 at 2:20 PM, Shakir (MCS) : The magazine MA6484 assigned to MLA4060 has not yet undergone the VD process. Currently, the segment ID is still 2100, whereas it should be 3100 after VD completion. Due to this, the MCS buzzer is being triggered. Please note: it is not possible to perform a RackIn at the post-VD STK using the manual port unless the VD process has been successfully completed. Thank you July 14, 2025 at 2:31 PM, Hồng Anh SL NC&VD 1F : Yes sir. Im checking information now July 14, 2025 at 2:32 PM, KIM SEYEON [김세연]_FA : @Mohammad Amir ) please share available lot July 14, 2025 at 2:32 PM, Shakir (MCS) : Checking sir July 14, 2025 at 2:35 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 86 CA: 87 Pre-Stk ➤ Notching AN: 09, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 00 Post-Stock ➤ Stacking AN: 81, CA: 187 VD AN (Process Breakdown) UR: 00, Drying: 68, LR: 64 Wait: 44, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 96, LR: 04, Wait: 76, OOS: 20 Thank you July 14, 2025 at 2:36 PM, Natsag/ Ivansca FA : @MCS NC AN AGV#4 idle. Please check Thank you! July 14, 2025 at 2:36 PM, Shakir (MCS) : Checking July 14, 2025 at 2:39 PM, Shakir (MCS) : Issue has been resolved now ✅ AGV04 started to move and magazine transferred to gantry input port. Thank you July 14, 2025 at 2:43 PM, 인제(Hwang) : @최명운(CHOI MYOUNGWOON) 음극 VD 회수물류 확인 부탁드립니다 July 14, 2025 at 2:58 PM, Shakir (MCS) : @FA Please check C1STKA71_P22, Its OOS. Thank you July 14, 2025 at 3:23 PM, Olena Katerynchuk : STK 1 Line (AGV) Robot #8 Error. Check please July 14, 2025 at 3:32 PM, 김현태 : NC CA ROBOT #3 error Thanks July 14, 2025 at 3:40 PM, 최명운(CHOI MYOUNGWOON) : @technician Please come to GF Ca ROBOT#3 July 14, 2025 at 3:43 PM, 김주연 : @FA 양극 로봇 3호기 이재 중에 매거진 전도위험입니다. 로봇 정지 상태입니다. 조치 바랍니다 July 14, 2025 at 3:47 PM, 김동섭 : This is CA VD ROOM C1STKC71-P01- MCP ALARM. July 14, 2025 at 3:47 PM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check here July 14, 2025 at 3:54 PM, Shakir (MCS) : Hello Good evening @김지수PM(Gyuri)_FA At 07:00:36, a Source Interlock Error occurred on MLA6239, indicating that Source VD 1–4 went Out of Service. During this period, AGV10 was assigned for UR from P01 and P02. However, the job assigned to port C1VDA040_P02 was terminated, and P02 subsequently went out of service. Meanwhile, AGV10 successfully completed the job at P01 at 09:09, but only one plate was delivered due to the unavailability of the second source. This interlock error directly caus July 14, 2025 at 4:00 PM, Shakir (MCS) : **P01 at 7:09 July 14, 2025 at 4:04 PM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 98, CA: 85 Pre-Stk ➤ Notching AN: 13, CA: 01 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 76, CA: 154 VD AN (Process Breakdown) UR: 08, Drying: 96, LR: 60 Wait: 44, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 96, LR: 04, Wait: 48, OOS: 20 Thank you July 14, 2025 at 4:06 PM, MCS/RTD System : C1STKC71_C01 is oos. July 14, 2025 at 4:07 PM, Shakir (MCS) : @FA Please check STKC71_C01 Load oversize error. Thank you July 14, 2025 at 4:09 PM, Mr.Miti (미티) FA : We're done. Supposedly the CS team is looking into it, that's why it's still standing. I hope they start it when they finish. July 14, 2025 at 4:36 PM, 김지수PM(Gyuri)_FA : Thanksss a lot! July 14, 2025 at 4:38 PM, Shakir (MCS) : You’re welcome July 14, 2025 at 5:09 PM, Victory : NC CA GF Line 3.3 Pls check the AGV, only one right side of BF02 is removed by AGV July 14, 2025 at 5:14 PM, Dariimaa/다리마/Ivancsa : @MCS please check July 14, 2025 at 5:14 PM, Shakir (MCS) : Checking July 14, 2025 at 5:19 PM, Shakir (MCS) : I think this is ACS issue, there is one job exist for empty magazine AGV10 assigned. July 14, 2025 at 5:20 PM, Shakir (MCS) : For Full magazine job just initiated and AGV04 assigned ✅ July 14, 2025 at 5:25 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 98, CA: 86 Pre-Stk ➤ Notching AN: 29, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 48, CA: 185 VD AN (Process Breakdown) UR: 00, Drying: 152, LR: 36 Wait: 16, OOS: 08 VD CA (Process Breakdown) UR: 04, Drying: 72, LR: 16, Wait: 88, OOS: 20 Thank you July 14, 2025 at 6:04 PM, Ngoc zia : @fa vd Ca 4-2 (#29) right under wrong position of plate. Can u take out & input plate again by agv pls July 14, 2025 at 6:16 PM, Takács Ádám FA Tech : Jó reggelt! Good morning! FA Tech. "B" műszak 2025.07.14. 9 Tech, 0 SL Overtime(0): Holiday(2): Szücs Géza Imre, Kovács Ágnes, Csanálosi Gábor Sick(0): Shift Change(0): --------------- Electrode(3): Rácz Dániel, Czeilinger Krisztián, Böröcz Tamás --------------- Assy GF (2): Takács Ádám, Böröczki Balázs NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Form/Modul(2): Boromisza Zoltán, Denkó János ------------ July 14, 2025 at 6:32 PM, Truong : NC 1F AN agv#10 error please come check @FA July 14, 2025 at 7:24 PM, Debreczeni Ármin : Hello. Somebody please share lot quantity July 14, 2025 at 7:25 PM, Debreczeni Ármin : Anode material coming slow for ST is there any problem? July 14, 2025 at 7:25 PM, MCS/RTD System : On it. Thank you July 14, 2025 at 7:28 PM, MCS/RTD System : Respected Sir and Esteemed members, and @Debreczeni Ármin , Kindly find below the GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 63 CA: 60 Pre-Stk ➤ Notching AN: 37 CA: 18 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 01 CA: 143 VD CA (Process Breakdown) UR: 12 Drying: 96 LR: 08 Wait: 60 OOS: 16 VD AN (Process Breakdown) UR: 08 Drying: 176 LR: 04 Wait: 20 OOS: 08 Sincere thanks for your attention! July 14, 2025 at 7:31 PM, MCS/RTD System : There's no issues. There are active jobs. MCS order is okay. We are actively monitoring. Thank you very much! July 14, 2025 at 7:33 PM, MCS/RTD System : And there's only 01 AN material. Thank you for your attention. July 14, 2025 at 7:34 PM, Debreczeni Ármin : @Lan Nhi Please check all an chambers are released? July 14, 2025 at 7:38 PM, Lan Nhi : Yes sir July 14, 2025 at 7:38 PM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. Please check.. Thank you.. July 14, 2025 at 7:44 PM, Takács Ádám FA Tech : Kész July 14, 2025 at 7:45 PM, Ngoc zia : Vd Ca 3-6 #24 agv 1 error July 14, 2025 at 7:50 PM, 이도형 (Lee) : @FA Nc An agv full magazine check please 1-3,1-2,1-1 July 14, 2025 at 7:56 PM, MCS/RTD System : Dear sir, There are no problems from MCS side. It's just too many jobs in ACS MSC already received UR request. Thank you very much ! July 14, 2025 at 8:00 PM, 방혁 PM(Bang.Hyuk) FA : @조범희 스택 수동물류 필요하시면 말씀해주세요 지원해드리겠습니다 July 14, 2025 at 8:17 PM, MCS/RTD System : @FA Good evening! Please check C1STKC72_P13 Data mismatch error. Thank you very much ! July 14, 2025 at 8:20 PM, MCS/RTD System : Dear @FA Also please check C1STKA72_P07 Data mismatch error, too. Thank you very much! July 14, 2025 at 8:28 PM, 이도형 (Lee) : @FA NC Ca #1 Robot is stopped. Please check. July 14, 2025 at 8:32 PM, Takács Ádám FA Tech : Kész July 14, 2025 at 8:44 PM, Debreczeni Ármin : Can you share again? July 14, 2025 at 8:45 PM, MCS/RTD System : Sure thing. On it. July 14, 2025 at 8:51 PM, MCS/RTD System : Respected Sir and Esteemed members, and @Debreczeni Ármin , Kindly find below the GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 42 CA: 44 Pre-Stk ➤ Notching AN: 43 CA: 23 Pre-Stk ➤ VD AN: 03 CA: 03 Post-Stock ➤ Stacking AN: 33 CA: 148 VD CA (Process Breakdown) UR: 16 Drying: 96 LR: 16 Wait: 60 OOS: 16 VD AN (Process Breakdown) UR: 16 Drying: 144 LR: 20 Wait: 28 OOS: 08 Sincere thanks for your attention! July 14, 2025 at 8:52 PM, Debreczeni Ármin : Thank you. @Diana we have AN in the storage and I hope AGVs are going to lines July 14, 2025 at 8:52 PM, Diana : I hope too July 14, 2025 at 9:17 PM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. Please check.. Thank you.. July 14, 2025 at 9:24 PM, Ngoc zia : @fa Vd ca 1-9 #agv4 errror July 14, 2025 at 9:34 PM, KIM SEYEON [김세연]_FA : @Böröczki Balázs please check the robot status July 14, 2025 at 9:41 PM, Böröczki Balázs : It has been solved already. There was many problem, that's why I cannot react to messages. July 14, 2025 at 9:46 PM, 방혁 PM(Bang.Hyuk) FA : @FA July 14, 2025 at 9:47 PM, 방혁 PM(Bang.Hyuk) FA : Pls check C1CNV72 INV Error July 14, 2025 at 9:51 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) hello VK could you check Available Lot ? July 14, 2025 at 9:52 PM, MCS/RTD System : On it, PM Bang Hyuk Sir. July 14, 2025 at 9:54 PM, 방혁 PM(Bang.Hyuk) FA : @FA Please check E0STKA52 6024 Track IVN Error July 14, 2025 at 9:55 PM, 방혁 PM(Bang.Hyuk) FA : *INV July 14, 2025 at 9:55 PM, MCS/RTD System : Kindly find below the GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 51 CA: 54 Pre-Stk ➤ Notching AN: 35 CA: 13 Pre-Stk ➤ VD AN: 03 CA: 01 Post-Stock ➤ Stacking AN: 38 CA: 141 VD CA (Process Breakdown) UR: 00 Drying: 120 LR: 16 Wait: 48 OOS: 16 VD AN (Process Breakdown) UR: 20 Drying: 112 LR: 36 Wait: 40 OOS: 08 Sincere thanks for your attention! July 14, 2025 at 9:56 PM, 방혁 PM(Bang.Hyuk) FA : This message was deleted. July 14, 2025 at 9:56 PM, KIM SEYEON [김세연]_FA : thanks July 14, 2025 at 10:00 PM, 정은탁 (Jung EunTak) : @방혁 PM(Bang.Hyuk) FA 안녕하세요 PM님. NC Ca 4-3 인포트 P03에 공매거진이 아닌 풀매거진이 들어갔습니다. 사진촬영후 현장 보존중인데 확인부탁드립니다. July 14, 2025 at 10:00 PM, Böröczki Balázs : Checking. July 14, 2025 at 10:00 PM, 방혁 PM(Bang.Hyuk) FA : 이동하겠습니다 July 14, 2025 at 11:00 PM, MCS/RTD System : @FA PLease check E0STKA52 Cranes are inactive Thank you very much ! July 14, 2025 at 11:01 PM, MCS/RTD System : Please do it on priority basis. There is shortage of trays for SL lines. Thank you very much for your cooperation. July 14, 2025 at 11:02 PM, 방혁 PM(Bang.Hyuk) FA : @Takács Ádám FA Tech July 14, 2025 at 11:03 PM, Takács Ádám FA Tech : Kész July 14, 2025 at 11:04 PM, Debreczeni Ármin : Send me new status please July 14, 2025 at 11:08 PM, MCS/RTD System : Kindly find below the GF Next Lot Quantity Availability for your kind reference: GF NC Reel Available AN: 44 CA: 47 Pre-Stk ➤ Notching AN: 37 CA: 06 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 47 CA: 120 VD CA (Process Breakdown) UR: 16 Drying: 128 LR: 12 Wait: 32 OOS: 16 VD AN (Process Breakdown) UR: 28 Drying: 80 LR: 68 Wait: 32 OOS: 12 Sincere thanks for your attention! July 14, 2025 at 11:54 PM, 이도형 (Lee) : @방혁 PM(Bang.Hyuk) FA PM님 NC Ca 1-2 아웃포트 매거진 전도 발생했습니다 July 14, 2025 at 11:57 PM, 이도형 (Lee) : 제조 쪽에서 사진촬영은 했습니다. 현장보전 하고 있을까요? July 14, 2025 at 11:59 PM, 방혁 PM(Bang.Hyuk) FA : @송태용(Song tae yong) 확인후 사진 촬영부탁드립니다 July 15, 2025 at 12:37 AM July 15, 2025 at 12:37 AM, 김지수PM(Gyuri)_FA : @fa Please check LTA0675 on eocna52_M09 track > not moving over 2hours thanks July 15, 2025 at 12:39 AM, Böröczki Balázs : Checking. July 15, 2025 at 12:55 AM, Tasnim / Ivancsa FA : This message was deleted. July 15, 2025 at 12:56 AM, 김지수PM(Gyuri)_FA : @fa please check VC08 an vd thanks July 15, 2025 at 1:05 AM, Ngoc zia : @fa can u check pls. Chamber can’t run July 15, 2025 at 1:09 AM, Ngoc zia : . July 15, 2025 at 1:21 AM, Debreczeni Ármin : Please send me new one thank you July 15, 2025 at 1:22 AM, MCS/RTD System : On it. Thank you very much July 15, 2025 at 1:26 AM, MCS/RTD System : Good early morning, everyone. Please find below the GF Next Lot Quantity Availability for your reference: GF NC Reel Available AN: 45 CA: 36 Pre-Stk ➤ Notching AN: 37 CA: 19 Pre-Stk ➤ VD AN: 03 CA: 03 Post-Stock ➤ Stacking AN: 28 CA: 100 VD CA (Process Breakdown) UR: 16 Drying: 152 LR: 08 Wait: 08 OOS: 16 VD AN (Process Breakdown) UR: 32 Drying: 52 LR: 100 Wait: 20 OOS: 12 Sincere thanks for your attention! July 15, 2025 at 1:37 AM, MCS/RTD System : @FA please check E0STKA51_C02 Load oversize error. Please check it on priority. Thank you very much for your quick support. July 15, 2025 at 1:43 AM, 방혁 PM(Bang.Hyuk) FA : @Takács Ádám FA Tech July 15, 2025 at 1:48 AM, Takács Ádám FA Tech : Dolgozom rajta July 15, 2025 at 1:57 AM, VK (mcs) : @FA Please check Anode reel STKA52 Track sensor detection abnormalities. July 15, 2025 at 2:44 AM, Debreczeni Ármin : Agv #1 #9 #5 #6 and one more without number just stand by position on VD AN area July 15, 2025 at 2:44 AM, 방혁 PM(Bang.Hyuk) FA : @Gua/ IvancsaFa July 15, 2025 at 2:45 AM, Debreczeni Ármin : #7 #8 #2 July 15, 2025 at 2:47 AM, Debreczeni Ármin : @Takács Ádám FA Tech valami központi infod van arról amit beírtam? July 15, 2025 at 2:49 AM, Takács Ádám FA Tech : Csak egy kis forgalmi fennakadás July 15, 2025 at 2:55 AM, 정은탁 (Jung EunTak) : @FA Ca VD 3-9(Ca#27) 좌측 상단 플레이트 안착 불량입니다. AGV로 재안착 부탁드립니다. July 15, 2025 at 2:55 AM, 방혁 PM(Bang.Hyuk) FA : @Takács Ádám FA Tech July 15, 2025 at 2:55 AM, 정은탁 (Jung EunTak) : @FA Ca VD 4-2(Ca#29) 우측 하단 플레이트 안착 불량입니다. AGV로 재안착 부탁드립니다. July 15, 2025 at 3:08 AM, Debreczeni Ármin : Please send me new one thank you July 15, 2025 at 3:11 AM, MCS/RTD System : Good early morning, everyone. Please find below the GF Next Lot Quantity Availability for your reference: GF NC Reel Available AN: 17 CA: 32 Pre-Stk ➤ Notching AN: 47 CA: 33 Pre-Stk ➤ VD AN: 11 CA: 00 Post-Stock ➤ Stacking AN: 00 CA: 105 VD CA (Process Breakdown) UR: 00 Drying: 124 LR: 16 Wait: 20 OOS: 20 VD AN (Process Breakdown) UR: 24 Drying: 40 LR: 00 Wait: 00 OOS: 12 Sincere thanks for your attention! July 15, 2025 at 3:19 AM, 정은탁 (Jung EunTak) : @김지수PM(Gyuri)_FA 안녕하세요 PM님. 현재 An 전창고에 풀매거진 자재 133개가 적치되어 있으며, An VD 챔버 36대가 전일 21시~22시 건조 이후 비가동 상태입니다. 메뉴얼 LR요청 시도했으나 효과가 미미하여 추가 조치 요청드립니다. 확인 부탁드립니다. July 15, 2025 at 3:27 AM, 방혁 PM(Bang.Hyuk) FA : @정은탁 (Jung EunTak) 위에 보시면 보이시겠지만 VD챔버로 투입가능한 매거진이 존재하지 않습니다. MCS/RTD홀드로 인한 문제는 아니고 조심스럽게 말씀드리면 MES/RMS쪽에 문제가 있어보입니다. July 15, 2025 at 3:27 AM, 방혁 PM(Bang.Hyuk) FA : @정은탁 (Jung EunTak) July 15, 2025 at 3:27 AM, 방혁 PM(Bang.Hyuk) FA : Photo July 15, 2025 at 3:31 AM, 방혁 PM(Bang.Hyuk) FA : @Takács Ádám FA Tech adam can you check A51? LOAD OVERSIZE ERROR July 15, 2025 at 3:32 AM, Takács Ádám FA Tech : @Böröczki Balázs July 15, 2025 at 3:33 AM, Böröczki Balázs : Yes. July 15, 2025 at 3:52 AM, Debreczeni Ármin : Now we have AN material in post vd STK? July 15, 2025 at 3:53 AM, MCS/RTD System : Unfortunately no. AN: 00 CA: 83 Thank you! July 15, 2025 at 3:54 AM, Debreczeni Ármin : Okay July 15, 2025 at 4:02 AM, MCS/RTD System : @FA Please check C1SKTC71_C02 Load oversize error. Thank you very much! July 15, 2025 at 4:06 AM, 이도형 (Lee) : @FA VD An #7 AGV is stopped. Please check. July 15, 2025 at 4:06 AM, Debreczeni Ármin : @Lan Nhi force vd operators hurry when a chamber is finished thank you July 15, 2025 at 4:20 AM, 방혁 PM(Bang.Hyuk) FA : 죄송합니다 원인파악이 잘못됬습니다. 01시부터 지속된 VD AGV방전에서 비롯된 문제로 파악됩니다. 정상공급까지 3시간 소요될것 같습니다 July 15, 2025 at 4:26 AM, Debreczeni Ármin : Still not increased? July 15, 2025 at 4:27 AM, MCS/RTD System : AN: 00 Ca: 79 July 15, 2025 at 4:29 AM, Debreczeni Ármin : Agv are delivering plates from pre vd an storage? As I see many chamber are not running July 15, 2025 at 4:30 AM, MCS/RTD System : All chambers has jobs. Thank you ! July 15, 2025 at 4:35 AM, Lan Nhi : yes. i already reminded op July 15, 2025 at 4:53 AM, MCS/RTD System : This message was deleted. July 15, 2025 at 4:55 AM, MCS/RTD System : Good morning, everyone. Please find below the GF Next Lot Quantity Availability for your reference: GF NC Reel Available AN: 74 CA: 36 Pre-Stk ➤ Notching AN: 30 CA: 13 Pre-Stk ➤ VD AN: 23 CA: 02 Post-Stock ➤ Stacking AN: 00 CA: 89 VD CA (Process Breakdown) UR: 20 Drying: 124 LR: 04 Wait: 12 OOS: 16 VD AN (Process Breakdown) UR: 08 Drying: 24 LR: 146 Wait: 00 OOS: 32 Sincere thanks for your attention! July 15, 2025 at 5:14 AM, 이도형 (Lee) : @FA NC Ca #1 Robot is stopped. Please check. July 15, 2025 at 5:18 AM, Takács Ádám FA Tech : Kész July 15, 2025 at 5:22 AM, MCS/RTD System : This message was deleted. July 15, 2025 at 5:22 AM, MCS/RTD System : @FA Please check C1SKTC52_C01 Load oversize error. Thank you very much! July 15, 2025 at 5:24 AM, 방혁 PM(Bang.Hyuk) FA : @Takács Ádám FA Tech ... July 15, 2025 at 5:25 AM, Takács Ádám FA Tech : Megyek July 15, 2025 at 5:32 AM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. Please check.. Thank you.. July 15, 2025 at 5:33 AM, Takács Ádám FA Tech : Kész July 15, 2025 at 5:33 AM, Takács Ádám FA Tech : An robot #1 pozíció problémával küzd. Nem technikusi hatáskör @Mr.Miti (미티) FA July 15, 2025 at 5:37 AM, Tasnim / Ivancsa FA : Robot #2 are also stoped.. July 15, 2025 at 5:40 AM, Debreczeni Ármin : Can you send me one more time please? July 15, 2025 at 5:42 AM, 송태용(Song tae yong) : @FA NC AN #1,2,3, Robot is stopped. Please check. July 15, 2025 at 5:50 AM, Nguyen Huy : @FA Robot #3 NC CA Operation MGZ detects sensor error, pls check July 15, 2025 at 5:56 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. Vd anode chamber 1/4 is closed. Agv# 01 cancel job. Thank you. July 15, 2025 at 5:57 AM, Shakir (MCS) : Hello, Good morning Checking Thank you July 15, 2025 at 5:58 AM, Shakir (MCS) : Job has been cancelled successfully Thank you July 15, 2025 at 6:00 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 9 Technician, 1 Sl, 2 Overtime ———————————— Electrode (2+1): Cehmann Zsolt Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(3): Brázik János Csepi Árpád Édl Tamás ———————————— July 15, 2025 at 6:06 AM, 김완중 : Please make another transfer job for VC01. VC01 has full plate now. July 15, 2025 at 6:06 AM, Shakir (MCS) : Sure, working on it Thank you July 15, 2025 at 6:07 AM, 김완중 : thank you July 15, 2025 at 6:08 AM, Shakir (MCS) : Issue has been resolved now ✅ AGV01 started to move Thank you July 15, 2025 at 6:08 AM, Shakir (MCS) : You’re welcome July 15, 2025 at 6:10 AM, MCS/RTD System : @FA Please check C1STKC71_P13/P14 Light curtain error. Thanks ! July 15, 2025 at 6:21 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. NC AN agv# 03, 08 idle. Thank you. July 15, 2025 at 6:21 AM, Shakir (MCS) : Working on it, Thanks July 15, 2025 at 6:25 AM, Shakir (MCS) : Issue has been resolved now ✅ AGV03 & AGV08 started to move Magazine transferred to gantry input ports. Thank you July 15, 2025 at 6:26 AM, MCS/RTD System : @FA Please check E0STKC51_C02 there is MCP AP error. Thank you July 15, 2025 at 6:30 AM, 전 운 (Jeon Woon) : Please Rechecking Lot availability July 15, 2025 at 6:30 AM, Shakir (MCS) : Checking July 15, 2025 at 6:30 AM, 전 운 (Jeon Woon) : @MCS July 15, 2025 at 6:36 AM, MCS/RTD System : Good morning @All GF Next Lot Quantity Availability GF NC Reel Available AN: 62, CA: 22 Pre-Stk ➤ Notching AN: 61, CA: 17 Pre-Stk ➤ VD AN: 36, CA: 03 Post-Stock ➤ Stacking AN: 00, CA: 113 VD AN (Process Breakdown) UR: 04, Drying: 68, LR: 12, Wait:00, OOS: 36 VD CA (Process Breakdown) UR: 00, Drying: 128, LR: 04, Wait: 32, OOS: 16 Thank you July 15, 2025 at 6:36 AM, 최명운(CHOI MYOUNGWOON) : GF -Zaya (ST AN) -Ganaa (ST CA) -Zulaa(VD) -Uyanga (NC) ※ Please take action first GF VD An AGV error July 15, 2025 at 6:40 AM, Zulaa/졸라/Ivancsa FA : Solved July 15, 2025 at 6:42 AM, 최명운(CHOI MYOUNGWOON) : Good job. Please continue to take quick action against An VD AGV error. July 15, 2025 at 6:48 AM, 김완중 : @MCS/RTD System GF Anode Pre-VD Storge port(P19) doesn’t move_MLA1237. Please check July 15, 2025 at 6:49 AM, MCS/RTD System : Checking July 15, 2025 at 6:56 AM, MCS/RTD System : @FA @Zulaa/졸라/Ivancsa FA Please check MLA1237 at C1STKA71_P19_OP01 not moving for long time, check the position/alignment of plate. From MCS everything good. Thank you July 15, 2025 at 7:02 AM, 지석범PM (이반차FA) : 매뉴얼 전환하는 과정에 포트에 알람 발생으로 PIO가 정상 완료되지 않아, 포트 오토스텝이 진행되지 못한 건 입니다. 조치 완료되었습니다. July 15, 2025 at 7:07 AM, Shakir (MCS) : Now AGV 10 assigned and on the way to VD AN 4-4 ✅ Thank you July 15, 2025 at 7:19 AM, 김완중 : PM님, 음극 VD에 단일 플레이트 반송이 지속 생기고 있습니다. 혹시 원인 파악 가능하실꺼요? July 15, 2025 at 7:40 AM, 전 운 (Jeon Woon) : 1,2,3,4Line An 건조분 부족으로 Station 메뉴얼 상태입니다. 참고부탁드려요. @지석범PM (이반차FA) July 15, 2025 at 7:42 AM, 김완중 : @Shakir (MCS) please check half chamber in VD Anode room July 15, 2025 at 7:42 AM, MCS/RTD System : @FA Please check E0STKA51_C01 there is Ready off during Forking error. Thank you July 15, 2025 at 7:42 AM, Shakir (MCS) : Checking July 15, 2025 at 7:43 AM, MCS/RTD System : Please check CNVA52_07052 Mata mismatch error. July 15, 2025 at 7:45 AM, Nguyen Huy : @Shakir (MCS) VD AN 4-7, 5-1, 4-8, 3-5, 6-9, 6-5 half chamber occurred, pls check July 15, 2025 at 7:45 AM, Shakir (MCS) : Sure, working on it Thank you July 15, 2025 at 7:52 AM, Shakir (MCS) : For VD AN half Chamber 4-7, 4-6, 5-1, 6-5, 6-9: Job initiated but currently all outbound ports of STKA71 busy. Waiting for free ports. 3-5 : Press LR 4-8: chamber already full Thank you July 15, 2025 at 7:54 AM, Nguyen Huy : Thank you for checking! July 15, 2025 at 7:54 AM, Shakir (MCS) : You’re welcome July 15, 2025 at 7:54 AM, Victory : Good morning! NC CA GF 1.1 Pls check and assign AGV in order to send empty MGZ to. We have to use manual way. Tks July 15, 2025 at 7:55 AM, Nguyen Huy : @FA Pls send AGV to reposition the bottom/right plate at chamber 3-6 VD AN, thank you July 15, 2025 at 8:13 AM, Eduard SL Shift A : Line6 ST 4 AGv 10 stopped please check July 15, 2025 at 8:16 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 40, CA: 08 Pre-Stk ➤ Notching AN: 53, CA: 07 Pre-Stk ➤ VD AN: 69, CA: 00 Post-Stock ➤ Stacking AN: 00, CA: 124 VD AN (Process Breakdown) UR: 04, Drying: 80, LR: 32, Wait:00, OOS: 36 VD CA (Process Breakdown) UR: 04, Drying: 128, LR: 16, Wait: 40, OOS: 04 Thank you July 15, 2025 at 8:34 AM, MCS/RTD System : @FA Magazine MA1421 is duplicated in the following plates. MLA0228 (C1STKA72, 0100203) MLA6091 (C1STKA71, 0100102) Thank you July 15, 2025 at 9:08 AM, 김현태 : NC AN Robot #3 error Thanks July 15, 2025 at 9:15 AM, KIM SEYEON [김세연]_FA : @MCS/RTD System please share available lot July 15, 2025 at 9:16 AM, MCS/RTD System : Checking July 15, 2025 at 9:21 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 48, CA: 01 Pre-Stk ➤ Notching AN: 41, CA: 00 Pre-Stk ➤ VD AN: 81, CA: 02 Post-Stock ➤ Stacking AN: 00, CA: 120 VD AN (Process Breakdown) UR: 04, Drying: 128, LR: 24, Wait:00, OOS: 40 VD CA (Process Breakdown) UR: 00, Drying: 132, LR: 16, Wait: 12, OOS: 08 Thank you July 15, 2025 at 9:43 AM, Anita Mirosnicsenko : Hello! Line 6 STK AGV#7 stopped, please check! Thank you! July 15, 2025 at 9:50 AM, Zaya/ivancsa FA : This AGV does not have any commands!! July 15, 2025 at 10:01 AM, Shakir (MCS) : Now only Plate MLA0228 having magazine MA0228, currently plate on hold state it can be release. Thank you @Zaya/ivancsa FA July 15, 2025 at 10:19 AM, Victory : NC CA GF Pls assign the AGV for Line 6.1, 6.2, 6.3, 2.1, 3.1 We have to use manual full MGZ Tks July 15, 2025 at 10:23 AM, 배병민 (Bae Byoungmin) : GF 음극 다관절 로봇#2 개선 작업등 진행하겠습니다. 주요 적용부분 모니터링 및 변경등으로 로봇이 잠시 멈출수는 있으나, 설비는 생산에 최대 지장이 가지않도록 Job 관리하면서 진행 예정입니다. We will proceed with the improvement work of GF An multi-joint robot #2. The robot may stop for a while due to monitoring and changes to the main application area, but we will proceed while managing the job so that the equipment does not cause any disruption to production. July 15, 2025 at 10:41 AM, 박태영 : please share available lot July 15, 2025 at 10:41 AM, Shakir (MCS) : Checking sir July 15, 2025 at 10:44 AM, Shakir (MCS) : GF Next Lot Quantity Availability GF NC Reel Available AN: 60, CA: 02 Pre-Stk ➤ Notching AN: 28, CA: 00 Pre-Stk ➤ VD AN: 83, CA: 01 Post-Stock ➤ Stacking AN: 01, CA: 158 VD AN (Process Breakdown) UR: 08, Drying: 144, LR: 16, Wait:00, OOS: 16 VD CA (Process Breakdown) UR: 28, Drying: 132, LR: 12, Wait: 36, OOS: 04 Thank you July 15, 2025 at 11:09 AM, MCS/RTD System : @FA Please check C1STKC71_P13/P14 Light curtain error. Thanks July 15, 2025 at 11:18 AM, Victory : VD CA GF #54(6-9) Pls assign the AGV in order to re-place the plate. It is not in good position. Tks. July 15, 2025 at 11:35 AM, Nguyen Huy : @FA Pls check C1STKA71_C01, it's "Inactive" status, thank you July 15, 2025 at 11:36 AM, 김지수PM(Gyuri)_FA : @fa Please check LTC0199 > E0CNVC52 Not moving over 6hours July 15, 2025 at 11:37 AM, 김지수PM(Gyuri)_FA : Please check the M09(LTC0199) M10(LTC1324) port July 15, 2025 at 11:40 AM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please increase the priority of 7043track(e0stka51 p01) thanks July 15, 2025 at 11:45 AM, Shakir (MCS) : Done ✅ July 15, 2025 at 11:46 AM, 김지수PM(Gyuri)_FA : @Nagy Tibor July 15, 2025 at 11:46 AM, Shakir (MCS) : Now it moved to STKA51 Thank you July 15, 2025 at 12:02 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 55, CA: 01 Pre-Stk ➤ Notching AN: 06, CA: 00 Pre-Stk ➤ VD AN: 81, CA: 00 Post-Stock ➤ Stacking AN: 17, CA: 191 VD AN (Process Breakdown) UR: 00, Drying: 160, LR: 16, Wait:00, OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 112, LR: 04, Wait: 56, OOS: 04 Thank you July 15, 2025 at 12:14 PM, 김희래 : @FA Please check C1STKA71_C01. Port interface error. July 15, 2025 at 12:17 PM, Mr.Miti (미티) FA : Solve July 15, 2025 at 12:17 PM, Mr.Miti (미티) FA : D July 15, 2025 at 1:09 PM, 전 운 (Jeon Woon) : Please rechecking July 15, 2025 at 1:17 PM, Sazzad Bhai SKon : GF Next Lot Quantity Availability GF NC Reel Available AN: 48, CA: 15 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 81, CA: 00 Post-Stock ➤ Stacking AN: 38, CA: 215 VD AN (Process Breakdown) UR: 00, Drying: 160, LR: 16, Wait:00, OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 84, LR: 04, Wait: 80, OOS: 04 Thank you July 15, 2025 at 1:25 PM, Spilka Sofia : Line 3 St 17 AGV 9 stopped,pls check,Thanks July 15, 2025 at 1:36 PM, 김정희(Jeong hee FA) : @MCS GF An VD 1-2 po1.po2.po3.po4 It's empty. Please delete the information. Thank you. July 15, 2025 at 1:36 PM, Shakir (MCS) : Checking July 15, 2025 at 1:36 PM, 김정희(Jeong hee FA) : Thank you. July 15, 2025 at 1:41 PM, Shakir (MCS) : VD 1-2 AN information has been updated in MCS. ✅ Thank you July 15, 2025 at 1:58 PM, 전 운 (Jeon Woon) : 5라인앞에 14대차 정도있어요 가져가셔얄할듯합니다. @최명운(CHOI MYOUNGWOON) @김정희(Jeong hee FA) July 15, 2025 at 2:13 PM, P.Bence A SSL : Check again please . July 15, 2025 at 2:14 PM, MCS/RTD System : This message was deleted. July 15, 2025 at 2:14 PM, MCS/RTD System : Checking July 15, 2025 at 2:20 PM, 전 운 (Jeon Woon) : Please confirm that AGV does not return the full plate of C1CNV072_P31,32. @MCS July 15, 2025 at 2:21 PM, Shakir (MCS) : Checking July 15, 2025 at 2:23 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 34, CA: 35 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 37, CA: 02 Post-Stock ➤ Stacking AN: 58, CA: 240 VD AN (Process Breakdown) UR: 04, Drying: 108, LR: 52, Wait:04, OOS: 04 VD CA (Process Breakdown) UR: 20, Drying: 56, LR: 00, Wait: 120, OOS: 04 Thank you July 15, 2025 at 2:28 PM, Shakir (MCS) : A job has been created for Line 1 ST; however, the line is currently not in production.Would you like me to cancel the job ? Thank you July 15, 2025 at 2:33 PM, 전 운 (Jeon Woon) : Yes please July 15, 2025 at 2:42 PM, Shakir (MCS) : Previous job has been cancelled now P31/P32 carrier transferring to line 2 ST. Job already initiated and AGV assigned ✅ Thank you July 15, 2025 at 2:42 PM, 전 운 (Jeon Woon) : Thx! July 15, 2025 at 3:06 PM, Zulaa/졸라/Ivancsa FA : @MCS please check. NC AN agv# 04 idle. Thank you. July 15, 2025 at 3:06 PM, Shakir (MCS) : Checking July 15, 2025 at 3:09 PM, Shakir (MCS) : Issue has been resolved now ✅ AGV04 started to move Magazine transferred to gantry input ports. Thank you July 15, 2025 at 3:23 PM, Zulaa/졸라/Ivancsa FA : This message was deleted. July 15, 2025 at 3:24 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 36, CA: 42 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 20, CA: 00 Post-Stock ➤ Stacking AN: 62, CA: 255 VD AN (Process Breakdown) UR: 16, Drying: 108, LR: 48, Wait:00, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 56, LR: 04, Wait: 136, OOS: 04 Thank you July 15, 2025 at 3:24 PM, Shakir (MCS) : Sure, working on it Thank you July 15, 2025 at 3:26 PM, Shakir (MCS) : NC An AGV06 moving Check AGV01 error @Zulaa/졸라/Ivancsa FA Thank you July 15, 2025 at 3:37 PM, 김희래 : @FA Please check C1STKA71. MLA6208 does not go to port20.(output H/S off). There is no carrier P20 port. July 15, 2025 at 3:46 PM, MCS/RTD System : @Nagy Tibor @SCS please check job getting delayed Thank you July 15, 2025 at 4:20 PM, MCS/RTD System : Solved, Now plates assigned to VD AN 5-6, Thank you July 15, 2025 at 4:26 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 41, CA: 63 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 2, CA: 01 Post-Stock ➤ Stacking AN: 87, CA: 254 VD AN (Process Breakdown) UR: 12, Drying: 92, LR: 40, Wait:24, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 48, LR: 04, Wait: 132, OOS: 04 Thank you July 15, 2025 at 5:49 PM, 이한웅(삼구) : GF An 전창고에 SCS에는 플레이트 있는데 RTD에서는 조회가 안됩니다. 확인 부탁드립니다. July 15, 2025 at 6:15 PM, VK (mcs) : @FA Please check Circular conveyor C1CNV072-P28(16023) Is there any actual carrier? Thx July 15, 2025 at 6:16 PM, 김지수PM(Gyuri)_FA : @FA Please check E0CNVA52 > full reel not moving July 15, 2025 at 6:16 PM, 김지수PM(Gyuri)_FA : There are no reels on the buffer and manual outport! July 15, 2025 at 6:19 PM, 김지수PM(Gyuri)_FA : @Szücs Géza FT-B July 15, 2025 at 6:23 PM, Dániel Hufnágel : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.15. 9 Tech,+3 overtime 1SL Overtime(3): Szabadi Miklós, Kovács Szabolcs, Hufnágel Dániel Holiday(1): Szücs Géza Imre, Sick(1): Czeilinger Krisztián Shift Change(0): --------------- Electrode(4): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós --------------- Assy GF (4): Takács Ádám, Böröczki Balázs, Kovács Szabolcs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbe July 15, 2025 at 6:23 PM, Ngoc zia : @fa vd Ca 6-9 #54 agv take out mgz but still have 1 plate on chamber. Can u check pls July 15, 2025 at 6:26 PM, VK (mcs) : UR reply for port 1 was carrier ID is null, please adjust it and apply UR again. July 15, 2025 at 6:35 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 5plates out from the c1cnv072_m04 July 15, 2025 at 6:38 PM, Debreczeni Ármin : @VK (mcs) Good evening. Please share lot quantity July 15, 2025 at 6:41 PM, Yon Ko/연커/ : @MCS hello! NC AN AGV#05 is idle with material check this. Thank u! July 15, 2025 at 6:44 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 30, CA: 59 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 2, CA: 02 Post-Stock ➤ Stacking AN: 70 , CA: 231 VD AN (Process Breakdown) UR: 08, Drying: 120, LR: 12, Wait:14, OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 68, LR: 02 ,Wait: 121, OOS: 04 July 15, 2025 at 6:46 PM, VK (mcs) : Transport job terminated by Rail I will sent it back to STK. July 15, 2025 at 6:49 PM, VK (mcs) : Can someone please check this. Thx July 15, 2025 at 6:56 PM, Szabolcs : Done July 15, 2025 at 6:59 PM, Truong : Hello NC AN agv #3 error please come check @FA July 15, 2025 at 6:59 PM, Amgaa FA : coming July 15, 2025 at 7:00 PM, MCS/RTD System : @FA Please check cathode Reel STK C51 Cranes are inactive stopped July 15, 2025 at 7:02 PM, VK (mcs) : Thank you but I asked another conveyor it is in anode stacking area . C1CNV072 port 28. Thx July 15, 2025 at 7:02 PM, Böröczki Balázs : Yes, there's a plate with full magazines (MLC2142). July 15, 2025 at 7:02 PM, VK (mcs) : Thanks for checking July 15, 2025 at 7:08 PM, VK (mcs) : Any action? @FA please take a look July 15, 2025 at 7:10 PM, Böröczki Balázs : It's working now. July 15, 2025 at 7:14 PM, 김지수PM(Gyuri)_FA : @VK (mcs) Could you please increase the priority of 7043track(e0stka51 P01) for a while? July 15, 2025 at 7:14 PM, 김지수PM(Gyuri)_FA : Rtv has stopped because of empty tray's stagnant July 15, 2025 at 7:15 PM, VK (mcs) : Sure I will July 15, 2025 at 7:22 PM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Please investigate the job that has not been transferred for more than 3 hours among MCS transfer jobs July 15, 2025 at 7:23 PM, VK (mcs) : Do you want it for all area or just GF assembly? July 15, 2025 at 7:24 PM, 방혁 PM(Bang.Hyuk) FA : GF ASSY July 15, 2025 at 7:27 PM, 김지수PM(Gyuri)_FA : @VK (mcs) Are there any destinated jobs(from stack station) with Mlc2142 MLC1182 MLC2197? July 15, 2025 at 7:33 PM, VK (mcs) : MLC2142 location was N/A for a long time. After confirmation via FA team, I modified it. And now it gets a job. Others waiting for this carriers. July 15, 2025 at 7:34 PM, 김지수PM(Gyuri)_FA : Thanks! July 15, 2025 at 7:34 PM, VK (mcs) : There is no specific issue. All are in circular conveyor and waiting for next carrier. July 15, 2025 at 7:42 PM, VK (mcs) : @FA Please check AGV 2#9#4#6 Anode VD Their charging status is under 45 SoC. July 15, 2025 at 7:46 PM, 김지수PM(Gyuri)_FA : 2 4 9 are going to charger and 6 has a job( SOC is 53) July 15, 2025 at 7:48 PM, 원재 : @FA Please check NC Ca Robot#1 alram July 15, 2025 at 8:15 PM, Ngoc zia : Op UR again but the bcr is gone on chamber. We can’t request agv. Can u take the order with agv to take out mgz pls. July 15, 2025 at 8:17 PM, VK (mcs) : Please confirm carrier ID MLC6388? July 15, 2025 at 8:18 PM, VK (mcs) : Transport job created July 15, 2025 at 8:28 PM, Lan Nhi : @FA Hello. Please add another chamber to the machine 1-8 VD/CA. Thank you. July 15, 2025 at 8:29 PM, Debreczeni Ármin : Please send me new quantity please July 15, 2025 at 8:39 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 33, CA: 70 Pre-Stk ➤ Notching AN: 00, CA: 01 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 70 , CA: 187 VD AN (Process Breakdown) UR: 10, Drying: 132, LR: 24, Wait:28, OOS: 12 VD CA (Process Breakdown) UR: 12, Drying: 84, LR: 08, Wait: 102, OOS: 04 July 15, 2025 at 9:03 PM, 이한웅(삼구) : NC An 1-3, 2-3 공매거진 투입 지연으로 비가동 중입니다. July 15, 2025 at 9:03 PM, 방혁 PM(Bang.Hyuk) FA : 전창고에 공매거진이 없습니다... July 15, 2025 at 9:05 PM, 이한웅(삼구) : 현장에 많습니다.... July 15, 2025 at 9:25 PM, 이한웅(삼구) : NC An 3-3 인 포트 공매거진 낙하했습니다. 확인 부탁드립니다. @방혁 PM(Bang.Hyuk) FA July 15, 2025 at 9:27 PM, 이한웅(삼구) : 매거진 정위치 하고 가동하면 될까요? July 15, 2025 at 9:30 PM, 방혁 PM(Bang.Hyuk) FA : 잠시만요 July 15, 2025 at 9:34 PM, Lan Nhi : please check again eg/ Machine shift 1-8, need to load 2 more pallets. plz check for me. thank you very much July 15, 2025 at 9:36 PM, MCS/RTD System : This message was deleted. July 15, 2025 at 9:37 PM, MCS/RTD System : Please apply the load request for empty ports July 15, 2025 at 10:07 PM, MCS/RTD System : @FA Please check Anode Reel STK A52 July 15, 2025 at 10:07 PM, Böröczki Balázs : Checking . July 15, 2025 at 10:21 PM, Debreczeni Ármin : Please send again thank you July 15, 2025 at 10:27 PM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 33, CA: 59 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 02 Post-Stock ➤ Stacking AN: 93 , CA: 163 VD AN (Process Breakdown) UR: 15 , Drying: 132, LR: 14, Wait:28, OOS: 12 VD CA (Process Breakdown) UR: 19, Drying: 108, LR: 08, Wait: 73, OOS: 04 July 15, 2025 at 10:29 PM, Debreczeni Ármin : Agv #10 stopped an vd July 15, 2025 at 10:29 PM, Debreczeni Ármin : There is a traffic jam July 15, 2025 at 11:22 PM, 이한웅(삼구) : please check An VD 4-7(#34) half chamber July 15, 2025 at 11:26 PM, 이한웅(삼구) : please check Ca VD 1-8(#34) half chamber(3 time LR) July 15, 2025 at 11:28 PM, VK (mcs) : LR received several times. Please do not apply again. Material will deliver when they are available. Thx July 15, 2025 at 11:32 PM, VK (mcs) : UR received for ports 3 and 4 but transfer job cancelled by OP action. Please apply again UR for full ports. July 16, 2025 at 12:00 AM July 16, 2025 at 12:00 AM, Tasnim / Ivancsa FA : Notching (An) Robot #1 is not working.. Please check.. Thank you.. July 16, 2025 at 12:05 AM, Selem /Ivancsa FA : @MCS . Anode #13 and 2-4 chambers are completely empty of pallets. Please cancel the task and release the AGVs. Thank you July 16, 2025 at 12:07 AM, MJ/ Ivancsa FA : @VK (mcs) Could you please delete task from GF VD AN, AGV#03, it is standing next to chamber 2-3 (which is also empty). Thank you July 16, 2025 at 12:07 AM, MCS/RTD System : Job canceled July 16, 2025 at 12:07 AM, MJ/ Ivancsa FA : @MCS/RTD System July 16, 2025 at 12:08 AM, VK (mcs) : Did you transferred it manually on AGV 6? July 16, 2025 at 12:18 AM, MJ/ Ivancsa FA : No, it wasn’t me July 16, 2025 at 12:30 AM, Debreczeni Ármin : @VK (mcs) share lot quantity please July 16, 2025 at 12:32 AM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) Hello vk Could you check GF CA N VD 1-8 LR/UR status July 16, 2025 at 12:33 AM, VK (mcs) : LR received at 23:34, material will transfer when they are available July 16, 2025 at 12:35 AM, VK (mcs) : Problem is, RTD received multiple times load request. Whenever new LR applying, then machine goes to end of queue base on priority of transaction. July 16, 2025 at 12:36 AM, VK (mcs) : Transfer* July 16, 2025 at 12:42 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 44, CA: 63 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 02 Post-Stock ➤ Stacking AN: 85 , CA: 159 VD AN (Process Breakdown) UR: 06 , Drying: 132, LR: 12, Wait:39, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 112, LR: 14, Wait: 59, OOS: 04 July 16, 2025 at 1:00 AM, MCS/RTD System : @FA Please check Cathode Reel conveyor C52 RTV is not transferring materials. July 16, 2025 at 1:11 AM, 방혁 PM(Bang.Hyuk) FA invited 보경. July 16, 2025 at 1:18 AM, 정은탁 (Jung EunTak) : @FA NC An 1-1 AGV #1 UR Error. Please Check. July 16, 2025 at 1:25 AM, Xeng : NC CA agv#1 error not moving please come check July 16, 2025 at 1:26 AM, Selem /Ivancsa FA : Solved July 16, 2025 at 1:38 AM, Ngoc zia : @fa Vd Ca 4-8 #agv3 error July 16, 2025 at 1:40 AM, 이한웅(삼구) : @방혁 PM(Bang.Hyuk) FA PM님 Ca #2 로봇 공매건진 포트에 매거진 놓을때 아크릴 판이랑 충돌 나는데 이거 괜찮은건가요? 아크릴판 깨져있습니다 July 16, 2025 at 1:46 AM, 이한웅(삼구) : @이민재 July 16, 2025 at 1:57 AM, Xeng : NC CA 5/2 The belt at the outline is loose. Please come and check it! Thanks! @Fa July 16, 2025 at 1:59 AM, 이한웅(삼구) : 위험해 보이는데 확인 부탁드립니다... July 16, 2025 at 2:01 AM, MCS/RTD System : @FA Please check Anode Reel STK A51 Load oversize error July 16, 2025 at 2:02 AM, Dániel Hufnágel : Just a moment please July 16, 2025 at 2:08 AM, 이민재 : GF NC CA 다관절 로봇#2 - 8008로 빈 매거진 제일 바깥쪽 적재시 다관절 로봇과 벽면 아크릴 충돌로 아크릴판 파손 - 8007도 동일 현상 - 로봇 빈매거진 적재시 안전위험 문제로 비가동 돌리겠습니다 July 16, 2025 at 2:15 AM, Debreczeni Ármin : @VK (mcs) share lot quantity please July 16, 2025 at 2:23 AM, 이한웅(삼구) : please check NC An magazine in/out port July 16, 2025 at 2:29 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 65, CA: 44 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 89 , CA: 140 VD AN (Process Breakdown) UR: 04 , Drying: 124, LR: 04, Wait:57, OOS: 12 VD CA (Process Breakdown) UR: 01, Drying: 120, LR: 10, Wait: 41, OOS: 04 July 16, 2025 at 2:30 AM, 방혁 PM(Bang.Hyuk) FA : GF NC AN RTV INV 문제로 인해 비가동중입니다. 현재 복구작업 진행중입니다. NC릴 공급에 차질이 있을수 있습니다 July 16, 2025 at 2:45 AM, 방혁 PM(Bang.Hyuk) FA : @MCS Please make the GF NC AN REEL supply come out to the reel warehouse port Bc GF NC AN is down July 16, 2025 at 2:45 AM, 방혁 PM(Bang.Hyuk) FA : @VK (mcs) July 16, 2025 at 2:46 AM, 방혁 PM(Bang.Hyuk) FA : @제조 음극 노칭 RTV 비가동으로 인해 릴창고 포트로 릴을 받아야할것 같습니다. July 16, 2025 at 2:47 AM, MCS/RTD System : @FA @AGV Please check AGV 3 It is waiting for a while Cathode VD Destination is 4/8 July 16, 2025 at 2:49 AM, Dániel Hufnágel : @Debreczeni Ármin Jó estét! Kérdezném mennyi anyagotok van Notching 4-5-6 ra? Jelen pillanatban hibával küzdünk és nem tudni mikorra oldodik meg! July 16, 2025 at 2:50 AM, VK (mcs) : Should I release full tray to STK manual port? July 16, 2025 at 2:52 AM, Dániel Hufnágel : As soon as we get an answer yes please, still waiting for @Debreczeni Ármin July 16, 2025 at 2:53 AM, Debreczeni Ármin : Szia hát amennyi kint van a gépeknél. Mindjárt utána járok. Termel az összes sor egyébként, hogy hogy csak ezekez érinti? July 16, 2025 at 2:54 AM, Dániel Hufnágel : Ezek a hátsó portokra kimenő anyagra vonatkoznak July 16, 2025 at 3:10 AM, Debreczeni Ármin : Ha sikerül megoldani a problémát kérlek jelezz köszi. July 16, 2025 at 3:13 AM, VK (mcs) : Any action? @Selem /Ivancsa FA Please check it, carrier is on the AGV more than 3hours. July 16, 2025 at 3:15 AM, Yon Ko/연커/ : Oh I’m sorry I didn’t reply sooner. Korean technician working on it. July 16, 2025 at 3:15 AM, 이민재 : The supplier is currently checking due to an issue July 16, 2025 at 3:15 AM, VK (mcs) : Thanks for confirmation July 16, 2025 at 3:22 AM, Dániel Hufnágel : Természetesen July 16, 2025 at 3:26 AM, Dániel Hufnágel : @VK (mcs) We stopped C0PVC020 till yaskawa engineer come back! July 16, 2025 at 3:27 AM, VK (mcs) : Thanks for information July 16, 2025 at 3:40 AM, Debreczeni Ármin : @VK (mcs) Can you send us reels to manual ports? Anode July 16, 2025 at 3:41 AM, VK (mcs) : I will release them to M09 and M10 July 16, 2025 at 3:43 AM, Dániel Hufnágel : @Debreczeni Ármin közel 15 perc és kiderül jó e July 16, 2025 at 3:44 AM, Dániel Hufnágel : Egyenlőre még raktárhibán vagyunk, amint ez indul elvileg lesz hátul is reel ellátás July 16, 2025 at 3:45 AM, Debreczeni Ármin : Thank you, when the storage is working again we will continue the normal mode July 16, 2025 at 3:45 AM, Debreczeni Ármin : Renden köszi July 16, 2025 at 3:46 AM, MCS/RTD System : @FA Please check Cathode Reel STK C51 MCP AP error. July 16, 2025 at 4:15 AM, 이한웅(삼구) : RTV 수리 완료인가요? July 16, 2025 at 4:15 AM, 방혁 PM(Bang.Hyuk) FA : 넵 July 16, 2025 at 4:15 AM, 방혁 PM(Bang.Hyuk) FA : 가동중입니다 July 16, 2025 at 4:15 AM, 이한웅(삼구) : 넵 알겠습니다. July 16, 2025 at 4:24 AM, Debreczeni Ármin : @VK (mcs) please share lot quantity July 16, 2025 at 4:28 AM, Debreczeni Ármin : Nem jó még? July 16, 2025 at 4:30 AM, VK (mcs) : GF Next Lot Quantity Availability GF NC Reel Available AN: 87 , CA: 33 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 100 , CA: 113 VD AN (Process Breakdown) UR: 13 , Drying: 112, LR: 14, Wait:61, OOS: 16 VD CA (Process Breakdown) UR: 00, Drying: 112, LR: 14, Wait: 23, OOS: 04 July 16, 2025 at 4:31 AM, Debreczeni Ármin : Shift leader told me reels not coming on manual ports July 16, 2025 at 4:32 AM, VK (mcs) : Do you mean M10 and M09 or another ports? 1/2/3/4/5/6/7/8 July 16, 2025 at 4:34 AM, Debreczeni Ármin : 10 and 09 July 16, 2025 at 4:34 AM, Debreczeni Ármin : @Lan Nhi these ones yes? July 16, 2025 at 4:35 AM, VK (mcs) : 10 is already occupied with LTA1131 July 16, 2025 at 4:36 AM, VK (mcs) : If they asking about other ports, It has delay because STK is busy due to previous error. But I will check it out again July 16, 2025 at 4:37 AM, Lan Nhi : Yes Boss July 16, 2025 at 4:39 AM, Lan Nhi : All July 16, 2025 at 4:40 AM, VK (mcs) : STK is busy, for all ports jobs assigned, July 16, 2025 at 5:00 AM, MJ/ Ivancsa FA : I kindly request somebody to check GF VD AN chamber #37[5-1].Thank you for your cooperation! July 16, 2025 at 5:04 AM, Debreczeni Ármin : @Truong @Xeng check please July 16, 2025 at 5:17 AM, Truong : Please go to 5-1 AN VD to check AGV#6 because of error July 16, 2025 at 5:43 AM, Debreczeni Ármin : @VK (mcs) please share lot quantity one more time thank you July 16, 2025 at 5:47 AM, Mohammad Amir : Good morning, Sharing. July 16, 2025 at 6:01 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 76, CA: 39 Pre-Stk ➤ Notching AN: 00, CA: 02 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 97 , CA: 119 VD AN (Process Breakdown) UR: 04, Drying: 108, LR: 16, Wait:52, OOS: 12 VD CA (Process Breakdown) UR: 04, Drying: 92, LR: 40, Wait: 28, OOS: 08 Thank you very much! July 16, 2025 at 6:10 AM, Baek Hojong(백호종)FA : 2025.07.16 / Day Shift (06:00~18:00)] Baek HOJONG 백호종PM • Assy: 김정희, 최명운, 윤정은 • 몽골 1F - Dariimaa (All) GF - Zulaa (ST AN) - Ganaa (ST CA) - Uyanga (VD) - Khaliun (NC) • 방글라데시 - Atik / Ivancsa FA - Nauman/Ivancsa FA • 헝가리 - kovács László 5/ Iváncsa FA July 16, 2025 at 6:25 AM, Mohammad Amir : Good morning @Uyanga FA , Please check VD CA AGV#3 ,it is currently on just 44% and it is not charging state right now,it is in Manual mode and idle. Please put it on charging. Thank you very much! July 16, 2025 at 6:38 AM, Mohammad Amir : Good morning @Manufacturing, Please check VD CA 5-9 ,it is in Manual mode hence OOS and we received LR for this machine and jobs have also been created. Please confirm do you need materials at this machine or not? Please confirm,These materials can be used in production for other VD machines if you don't need there. Thank you very much! July 16, 2025 at 6:45 AM, Mohammad Amir : @Manufacturing, Please press LR for VD CA 1-9,2-6,6-8,6-4,6-9 ,there is half chamber situation exists that's why only two ports have materials. Thank you very much! July 16, 2025 at 6:47 AM, Uyanga FA : @Baek Hojong(백호종)FA GF VD AN agv3 checking (1 material unk) July 16, 2025 at 6:47 AM, 김정희(Jeong hee FA) : GF An Robot#3 err Please take action. Thank you. July 16, 2025 at 6:48 AM, Baek Hojong(백호종)FA : Okay, I'll check it out. July 16, 2025 at 6:53 AM, QuangPhan : @FA @AGV . VD An 5-5 the plates was wrong position . Please use agv to fix it . thank u July 16, 2025 at 6:54 AM, QuangPhan : @FA VD AN AGV #3 error. Thanks July 16, 2025 at 6:55 AM, Baek Hojong(백호종)FA : P03 Port MLA6310 P04 Port MLA1234 ACS confirms it's not UNK, July 16, 2025 at 6:55 AM, Baek Hojong(백호종)FA : I'll go! July 16, 2025 at 7:25 AM, Mohammad Amir : @FA Please check NC CA Robot #1 ,it is OOS. Thank you very much! July 16, 2025 at 7:33 AM, 인제(Hwang) : Please check the LR of the half chambers: Ca VD 6-4, 6-8, 6-9 July 16, 2025 at 7:35 AM, Mohammad Amir : Good morning Sir, Please apply LR for remaining empty ports of 6-4,6-8 and 6-9 ,there was some issue exists that's why it is half chamber. Please press LR materials will go there according to availability. Thank you very much! July 16, 2025 at 7:35 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 46, CA: 28 Pre-Stk ➤ Notching AN: 01, CA: 14 Pre-Stk ➤ VD AN: 00, CA: 01 Post-Stock ➤ Stacking AN: 60 , CA: 93 VD AN (Process Breakdown) UR: 00, Drying: 120, LR: 12, Wait:14, OOS: 12 VD CA (Process Breakdown) UR: 00 , Drying: 108, LR: 12, Wait: 23,OOS: 08 Thank you very much! July 16, 2025 at 7:36 AM, Mohammad Amir : @Manufacturing @인제(Hwang) Sir, Please press LR for VD CA 1-9,2-6 ,there is half chamber situation exists that's why only two ports have materials. Thank you very much! July 16, 2025 at 7:39 AM, Mohammad Amir : @Manufacturing @Elena SL Please check and remove 1+1 carrier from C1CNV072_M01,it will increase stacking materials delivery. Issue :- For MLC4160(Located at M01) we found for magazine MC1024 stacking process is still going on. Thank you very much! July 16, 2025 at 7:41 AM, 인제(Hwang) : The LR has been re-requested, so please check it Ca VD 1-9, 2-6, 2-7, 6-4, 6-8, 6-9 July 16, 2025 at 7:41 AM, Mohammad Amir : Sure, Checking Sir! July 16, 2025 at 7:43 AM, Mohammad Amir : Sir, LR has been received successfully from all the mentioned VD CA machines as soon as there will be enough materials it will transfer to these machines as well. Thank you very much! July 16, 2025 at 7:43 AM, 인제(Hwang) : Thank you! July 16, 2025 at 7:45 AM, Mohammad Amir : You are welcome! July 16, 2025 at 7:47 AM, MCS/RTD System : Dear @FA , Please check C1STKA72-P13/14 there is light curtain error. Thank you very much! July 16, 2025 at 7:51 AM, MCS/RTD System : Dear @FA, Please confirm is there maintenance still going on NC CA Robot #1,#2 ,it is still OOS. Thank you very much! July 16, 2025 at 7:52 AM, Mohammad Amir : Good morning @Gégény Dávid , Please check this issue. Thank you very much! July 16, 2025 at 7:54 AM, MCS/RTD System : Dear @Manufacturing @인제(Hwang) , Please check this issue. Thank you very much! July 16, 2025 at 8:06 AM, Khaliun/Ivancsa FA : @MCS Good morning. Please cancel AGV#8 work as VD AN CHamper 2/3 is closed. Thank you. July 16, 2025 at 8:07 AM, Mohammad Amir : Good morning, Sure , checking! July 16, 2025 at 8:09 AM, Mohammad Amir : As I checked, There is no tasks exists for VD AN 2-3 chamber. Thank you very much! July 16, 2025 at 8:12 AM, MCS/RTD System : @FA Please check CNV052_M10 is OOS. Thank you very much! July 16, 2025 at 8:14 AM, 인제(Hwang) : That chamber is currently operating in offline mode. Please delete the job and make it available for use in another chamber July 16, 2025 at 8:15 AM, MCS/RTD System : @Manufacturing @Karina Please check C1CNV072_M04 and remove 1+2carriers from it,it will increase stacking materials. Thank you very much! July 16, 2025 at 8:17 AM, Mohammad Amir : Sir, Issue has been resolved successfully ✅. Now these materials will be used in production. Thank you very much! July 16, 2025 at 8:17 AM, Karina : @Yana Ushkalo @Anton July 16, 2025 at 8:17 AM, Uyanga FA : @MCS Good morning. Please cancel AGV#3 work as VD AN CHamper 2/2 is closed. Thank you. July 16, 2025 at 8:19 AM, Sazzad Bhai SKon : AGV #3 doesn't have a job now July 16, 2025 at 8:22 AM, 김동섭 : CA VD 4-7 AGV July 16, 2025 at 8:22 AM, 김동섭 : Alarm Stop July 16, 2025 at 8:23 AM, Hữu Thắng : @FA NC CA AGV#5 error . July 16, 2025 at 8:24 AM, Zulaa/졸라/Ivancsa FA : Solved July 16, 2025 at 8:35 AM, Mohammad Amir : Sir, Update :- Now VD CA 1-9 has been filled with materials ✅. Thank you very much! July 16, 2025 at 8:40 AM, 김현태 : NC AN AGV #7 error Thanks July 16, 2025 at 8:56 AM, MCS/RTD System : Dear @FA @Gégény Dávid Please confirm is there maintenance still going on NC CA Robot #2 ,it is still OOS and job for empty magazines delivery is pending. Thank you very much! July 16, 2025 at 9:06 AM, Gégény Dávid : I have no information about the robot in question, it has been in manual mode since the start of the shift! July 16, 2025 at 9:09 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 26, CA: 16 Pre-Stk ➤ Notching AN: 00, CA: 29 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 43 , CA: 124 VD AN (Process Breakdown) UR: 17, Drying: 132, LR: 12, Wait:04, OOS: 08 VD CA (Process Breakdown) UR: 02, Drying: 128, LR: 02, Wait: 68 ,OOS: 08 Thank you very much! July 16, 2025 at 9:41 AM, Zulaa/졸라/Ivancsa FA : @MCS please check. NC AN agv# 04 idle. Thank you. July 16, 2025 at 9:41 AM, Mohammad Amir : Sure, checking! July 16, 2025 at 9:42 AM, Khaliun/Ivancsa FA : @FA tech pls check VD CA#71 error. July 16, 2025 at 9:42 AM, Gégény Dávid : On way July 16, 2025 at 9:43 AM, Mohammad Amir : Issue has been resolved ✅. AGV#4 NC AN has started to move. Thank you very much! July 16, 2025 at 9:52 AM, Baek Hojong(백호종)FA : @FA 10 цагаас VIP үйлчлүүлэгчид ирэх болно. AGV эвдэрсэн тохиолдолд яаралтай арга хэмжээ авна уу. July 16, 2025 at 10:08 AM, MCS/RTD System : @인제(Hwang) @Manufacturing Please check and confirm which carrier actually exists on VD AN 1_6_P01? Thank you very much! July 16, 2025 at 10:13 AM, 김동섭 : Carrier ID is MLA3004 July 16, 2025 at 10:15 AM, MCS/RTD System : Please also confirm carrier id located at P04_1_6 VD AN. Thank you very much July 16, 2025 at 10:16 AM, 김동섭 : P4 carrier ID is MLA6079 July 16, 2025 at 10:22 AM, MCS/RTD System : Dear Sir, Could you alos check VD AN 6_5_P02 ,according to our database it is located here. Please confirm. Thank you very much! July 16, 2025 at 10:22 AM, 김지수PM(Gyuri)_FA : @fa Please check c1sktc71_C02 July 16, 2025 at 10:26 AM, 김동섭 : AN 6-5 P2 Carrier ID MLA6079 appears to be duplicated July 16, 2025 at 10:30 AM, Mohammad Amir : Dear @Manufacturing team, Good morning, Cartier MLA6079 located at VD AN 6-5_P02 and 1_6_P04 in both locations. It is a duplicated carrier so first let the VD be completed for both the materials and afterwards please print a new barcode and change for one of such carriers. Thank you very much! July 16, 2025 at 10:31 AM, Hữu Thắng : @MCS VD CA 6-9 has an error . Could you please transfer these magazines to KC72 . thank yoi July 16, 2025 at 10:32 AM, MCS/RTD System : Sure,working on it. July 16, 2025 at 10:36 AM, Mohammad Amir : Jobs have been created successfully to transfer these materials to back warehouse ✅ AGV#8 &#10 has been assigned. I am monitoring. Thank you very much! July 16, 2025 at 10:36 AM, MCS/RTD System : @Hữu Thắng for your reference. Thank you very much. July 16, 2025 at 10:39 AM, Mohammad Amir : @FA Please check VD CA AGV#10 it is in error and causing traffic and jobs are getting delayed. Thank you very much! July 16, 2025 at 10:40 AM, Mohammad Amir : @Uyanga FA Please check. Thank you very much! July 16, 2025 at 10:46 AM, 김지수PM(Gyuri)_FA : @Mohammad Amir Could you please check the duplicated carrier in C1STKC71 0105402? July 16, 2025 at 10:47 AM, MCS/RTD System : Sure,checking July 16, 2025 at 10:57 AM, 김동섭 : GF VD CA 6-9 Top left R plate detection sensor is defective Please replace it July 16, 2025 at 11:00 AM, Kateryna SSL C : @QuangPhan check it please. I will prepare new barcode July 16, 2025 at 11:02 AM, Mohammad Amir : Dear @김지수PM(Gyuri)_FA , Good morning, So the UNKDUP-MLC6010-250716095403A carrier currently located at C1STKC71(0105402). Below is the analysis:- When the original carrier MLC6010 reached at C1STKC71_P02 at 9:54 carrier id was reported as Duplicated and it became UNKDUP-MLC6010-250716095403A and original carrier MLC6010 location became N/A. So the original carrier MLC6010 currentl location is N/A. Feel free to ask me if you have any more questions. Thank you very much! July 16, 2025 at 11:06 AM, Mohammad Amir : Update :- VD CA 6-9 has been successfully unloaded ✅. Please feel free to inform me if you need any further assistance. Thank you very much! July 16, 2025 at 11:07 AM, 김지수PM(Gyuri)_FA : Thanks! July 16, 2025 at 11:10 AM, MCS/RTD System : This message was deleted. July 16, 2025 at 11:10 AM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 16, CA: 32 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 74 , CA: 127 VD AN (Process Breakdown) UR: 08 Drying: 116, LR: 06, Wait:22, OOS: 08 VD CA (Process Breakdown) UR: 02, Drying: 116, LR: 04, Wait: 76 ,OOS: 08 Thank you very much! July 16, 2025 at 11:10 AM, Mohammad Amir : You are most welcome,Gyuri. July 16, 2025 at 11:19 AM, QuangPhan : Checked — MLA6079 is duplicated. After drying is completed, I will change to a new barcode and inform you. Thank you so much! July 16, 2025 at 11:20 AM, Mohammad Amir : Thank you very much! July 16, 2025 at 11:22 AM, MCS/RTD System : @FA Please check C1CNV071_13_036 there is data mismatch error and it is blocking materials recovery. Thank you very much! July 16, 2025 at 11:23 AM, Baek Hojong(백호종)FA : @Lajos Gábor F.A. @FA Please check C1CNV071_13_036 there is data mismatch error and it is blocking materials recovery. Check plz July 16, 2025 at 11:38 AM, Gégény Dávid : Done July 16, 2025 at 11:38 AM, Mohammad Amir : Thank you very much! July 16, 2025 at 11:56 AM, MCS/RTD System : @FA Please check E0CNVC52_RTV1 , it is OOS,Reels supply has been stopped. Thank you very much! July 16, 2025 at 11:57 AM, Gégény Dávid : On way July 16, 2025 at 12:44 PM, Mohammad Amir : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 00, CA: 30 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 00 Post-Stock ➤ Stacking AN: 55 , CA: 130 VD AN (Process Breakdown) UR: 00, Drying: 92, LR: 04, Wait:08, OOS: 08 VD CA (Process Breakdown) UR: 02, Drying: 92, LR: 34, Wait: 64 ,OOS: 08 Thank you very much! July 16, 2025 at 12:54 PM, Mohammad Amir : This message was deleted. July 16, 2025 at 12:55 PM, Mohammad Amir : @Manufacturing Please check and remove 1+1 carrier from C1CNV072_M04,it will increase stacking materials delivery. Thank you very much! July 16, 2025 at 2:10 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 00, CA: 15 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 57 , CA: 123 VD AN (Process Breakdown) UR: 56, Drying: 72, LR: 36, Wait:08, OOS: 08 VD CA (Process Breakdown) UR: 30, Drying: 112, LR: 14, Wait: 52 ,OOS: 04 Thank you very much! July 16, 2025 at 2:13 PM, MCS/RTD System : @FA Please check AGV #5 VD CA ,it is in error and causing traffic resulting in delay of several jobs. Thank you very much! July 16, 2025 at 2:16 PM, MCS/RTD System : @FA @Lajos Gábor F.A. Please check C1CNV071_13_036 there is data mismatch error and it is blocking materials recovery. Thank you very much! July 16, 2025 at 2:16 PM, MCS/RTD System : @Uyanga FA Please check this issue. Thank you! July 16, 2025 at 2:19 PM, 배병민 (Bae Byoungmin) : 노칭 Ca 로봇#2 펜스 수정 작업으로 잠시 비가동 진행하겠습니다. 소요시간 30분 내 예정입니다. Notching Ca Robot #2 will be temporarily out of service for fence repair work. It is expected to take approximately 30 minutes. July 16, 2025 at 2:22 PM, Lajos Gábor F.A. : Done July 16, 2025 at 2:36 PM, 배병민 (Bae Byoungmin) : The work is complete. Robot Unit 2 is operating normally. July 16, 2025 at 2:37 PM, MCS/RTD System : Please check again,it still OOS. Thank you! July 16, 2025 at 2:41 PM, MCS/RTD System : @Lajos Gábor F.A. Please check C1STKC71-P22 there is Run time error and it is blocking materials recovery again. Please take action on priority. Thank you very much! July 16, 2025 at 3:14 PM, 최명운(CHOI MYOUNGWOON) : 충돌 위치 아크릴판 외측으로 이동조치 완료했습니다 July 16, 2025 at 3:33 PM, 최태영 invited 정락. July 16, 2025 at 3:51 PM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M04. It will further increase stacking materials delivery speed. Thank you very much! July 16, 2025 at 4:00 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 00, CA: 11 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 121, CA: 132 VD AN (Process Breakdown) UR: 04, Drying: 68 LR: 30, Wait:60, OOS: 08 VD CA (Process Breakdown) UR: 00, Drying: 148,LR: 08, Wait: 40 ,OOS: 04 Thank you very much! July 16, 2025 at 4:04 PM, MCS/RTD System : Important @FA Please check on priority AN VD AG #5 it is in error and many AGVs have stopped. Thank you! July 16, 2025 at 4:06 PM, Zulaa/졸라/Ivancsa FA : Solved July 16, 2025 at 4:06 PM, MCS/RTD System : Thank you very much @ July 16, 2025 at 4:08 PM, QuangPhan : @MCS Please check UR for VD AN 6-5. Thank you! July 16, 2025 at 4:10 PM, MCS/RTD System : Sure ,Checking! July 16, 2025 at 4:13 PM, Hữu Thắng : @FA NC CA AGV#10 stopped . Can you please check it . Thanks July 16, 2025 at 4:13 PM, MCS/RTD System : Hello There is an issue that's why UR us getting failed, please confirm me carrier id located at VD AN 6_5_P02? Thank you very much! July 16, 2025 at 4:22 PM, QuangPhan : Carrier is duplicated. Can I replace it in the chamber? July 16, 2025 at 4:23 PM, MCS/RTD System : This message was deleted. July 16, 2025 at 4:23 PM, MCS/RTD System : Yes I Remember about this chamber, is it MLA6079 ? If yes,please tell me VD process has successfully completed? July 16, 2025 at 4:25 PM, QuangPhan : Yes, MLA6079. Dry completed. July 16, 2025 at 4:26 PM, MCS/RTD System : Okay than please take the carrier out and change the barcode and send it to the warehouse. Thank you! July 16, 2025 at 4:27 PM, QuangPhan : This message was deleted. July 16, 2025 at 4:28 PM, QuangPhan : Dear FA, MCS There were two plates with duplicate barcodes (MLA6079). We have replaced one of the plates with a new barcode (MLA5500) and returned it to the warehouse. Thank you! July 16, 2025 at 4:28 PM, MCS/RTD System : Thank you very much! July 16, 2025 at 4:29 PM, MCS/RTD System : This duplicated plate issue has been resolved ✔️. Thank you @QuangPhan July 16, 2025 at 4:31 PM, QuangPhan : @MCS Please sent this chamber VD AN 6-5 to warehouse A72. Thank you July 16, 2025 at 4:32 PM, MCS/RTD System : Sure, working on it. July 16, 2025 at 4:34 PM, QuangPhan : @FA VD AN AGV #2 error. Thanks July 16, 2025 at 4:34 PM, MCS/RTD System : Jobs have been created successfully ✔️. Thank you! July 16, 2025 at 4:37 PM, Zulaa/졸라/Ivancsa FA : Done July 16, 2025 at 4:47 PM, Zulaa/졸라/Ivancsa FA : @MCS please check. VD CA agv #01 idle. Thank you. July 16, 2025 at 4:48 PM, MCS/RTD System : Sure,Checking! July 16, 2025 at 4:48 PM, F.A.briczius Gergő : @MCS/RTD System Can you create UD job for GF,CA,VD, AGV#1 to the C72 warehouse please? Thank you very much. July 16, 2025 at 4:48 PM, MCS/RTD System : Working on it, sure. July 16, 2025 at 4:50 PM, MCS/RTD System : Issue has been resolved ✔️ Thank you July 16, 2025 at 4:51 PM, F.A.briczius Gergő : Thank you for your help! July 16, 2025 at 4:59 PM, Zulaa/졸라/Ivancsa FA invited Gandolgor FA. July 16, 2025 at 5:05 PM, 김지수PM(Gyuri)_FA : @MCS/RTD System Could you please check why the job for MLA2057(C5VDA070_P04) was terminated at 16:49:22? July 16, 2025 at 5:07 PM, Sazzad Bhai SKon : Source interlock error July 16, 2025 at 5:12 PM, Hữu Thắng : @FA NC CA AGV#1 stopped . Can you please chekc it . Thanks July 16, 2025 at 5:15 PM, 김지수PM(Gyuri)_FA : Thanks for checking! July 16, 2025 at 5:24 PM, Zulaa/졸라/Ivancsa FA : @MCS delete job chamber 5/7. Chamber is empty. Thank you. July 16, 2025 at 5:24 PM, Mohammad Amir : Sure , cancelling July 16, 2025 at 5:24 PM, Mohammad Amir : Please tell me is it CA or AN? Thank you! July 16, 2025 at 5:25 PM, Zulaa/졸라/Ivancsa FA : Sorry. Vd An July 16, 2025 at 5:26 PM, MCS/RTD System : Job has been canceled ✔️ Thank you! July 16, 2025 at 5:35 PM, Zulaa/졸라/Ivancsa FA : @MCS please check. VD AN agv #06. Thank you. July 16, 2025 at 5:35 PM, MCS/RTD System : Checking July 16, 2025 at 5:37 PM, MCS/RTD System : Issue has been resolved AGV started to move Thank you July 16, 2025 at 5:58 PM, Nguyen Huy : @FA NC CA Robot #3 Time out error, pls check July 16, 2025 at 6:34 PM, Gua/ IvancsaFa : @mcs good afternoon, VD CA Chamber 1-5 (#05) P3,4 plates are in wrong position. please send an AGV. thank you July 16, 2025 at 6:37 PM, MCS/RTD System : Do you want to send plates to STKC72 ? July 16, 2025 at 6:38 PM, Gua/ IvancsaFa : no, i want to put it to right position July 16, 2025 at 6:38 PM, MCS/RTD System : @Nguyen Huy could you please check July 16, 2025 at 6:40 PM, MCS/RTD System : @ACS @FA please check July 16, 2025 at 6:40 PM, 원재 : Hello. Can you increase NC Ca 2-1 3-16-3 6-2 out port full mgz agv priority July 16, 2025 at 6:41 PM, Shakir (MCS) : Sure, Checking Thank you July 16, 2025 at 6:41 PM, 원재 : Thank you July 16, 2025 at 6:48 PM, Usukhuu /ivancsa FA : right side of the plates are in the wrong position, chamber is not recognized the plates id's July 16, 2025 at 6:49 PM, Shakir (MCS) : I have increased the priority for full mgz of NC 2-1,3-1,6-3 and 6-2. ✅ Currently all AGVs are busy Thank you July 16, 2025 at 6:50 PM, 원재 : Thank you for checking! July 16, 2025 at 7:01 PM, MCS/RTD System : Dear @All, Good evening GF Next Lot Quantity Availability GF NC Reel Available AN: 01, CA: 00 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 00 Post-Stock ➤ Stacking AN: 152, CA: 121 VD AN (Process Breakdown) UR: 04, Drying: 120 LR: 00, Wait:84, OOS: 12 VD CA (Process Breakdown) UR: 00, Drying: 108,LR: 04, Wait: 24 ,OOS: 04 Thank you July 16, 2025 at 7:04 PM, Usukhuu /ivancsa FA : @mcs please send agv to GF VD CA chamber 1-5 the plates are in wrong position July 16, 2025 at 7:04 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12+1 Overtime (1):Denkó János Sick (0): - Holiday (2): Kasztel Balázs, Kiss Balázs Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Zsurbej Zsolt, Novák Zoltán, Kovács Szabika Modul(2): Denkó János, Martina Dávid July 16, 2025 at 7:10 PM, MCS/RTD System : @Zsurbej Zsolt F.A. please check this issue Thank you July 16, 2025 at 7:15 PM, MCS/RTD System : @FA Please check C1SKTC52_C01 Load oversize error. Thank you July 16, 2025 at 7:21 PM, MCS/RTD System : @FA Please check AGV08 error NC CA, Thanks July 16, 2025 at 7:46 PM, Nguyen Huy : @MCS/RTD System hello, could you please check for the the lastest activities of mgz MC3019? I want to know where was it located because I can't find it on RTD July 16, 2025 at 7:46 PM, MCS/RTD System : Sure Checking July 16, 2025 at 7:52 PM, MCS/RTD System : Plate MLC6010 having the mgz MC3019, The last location of mgz was C0PVC10_P03. Currently Plate location is NA in MCS. Thank you July 16, 2025 at 7:53 PM, Nguyen Huy : Could you please move it to the C71 manual port? July 16, 2025 at 7:56 PM, MCS/RTD System : We need to update the current location of the plate its currently NA in MCS . After that job will execute. Thank you July 16, 2025 at 8:01 PM, Nguyen Huy : Thank you for your help! July 16, 2025 at 8:02 PM, Nguyen Huy : @FA Pls send AGV to reposition the top/left and top/right plate in chamber 1-5 VD CA, thank you July 16, 2025 at 8:12 PM, MCS/RTD System : @FA Please check E0CNVA51_P04 Run time error. Thank you July 16, 2025 at 8:26 PM, Usukhuu /ivancsa FA : done July 16, 2025 at 8:26 PM, Nguyen Huy : Thank you July 16, 2025 at 9:01 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 13, CA: 02 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 151, CA: 154 VD AN (Process Breakdown) UR: 14, Drying: 120 LR: 08, Wait:64, OOS: 12 VD CA (Process Breakdown) UR: 34, Drying: 108,LR: 20, Wait: 48 ,OOS: 04 Thank you July 16, 2025 at 9:42 PM, Dániel Hufnágel : @MCS/RTD System @Péti Gábor 22:00 Elsősorban katód oldalon stacking CVt megállítjuk karbantartás véget! Mivel a sorok megállnak így éjszakás műszak folyamán végig dolgozunk majd rajta! Amint végzünk jelzem! July 16, 2025 at 9:56 PM, Yon Ko/연커/ : @MCS NC AN AGV#04 idle with UNK check this. Thank u! July 16, 2025 at 9:58 PM, Shakir (MCS) : Checking July 16, 2025 at 10:03 PM, Shakir (MCS) : Issue resolved , AGV04 started to move ✅ Thank you July 16, 2025 at 10:45 PM, Tetiana SL/D : @fa AGV#10 stop near 3/9 machine. Please check it, thanks :) July 16, 2025 at 10:48 PM, Yon Ko/연커/ : @MCS NC AN AGV#05 idle with material MA1125. Check this thank u! July 16, 2025 at 10:48 PM, MCS/RTD System : Checking July 16, 2025 at 10:52 PM, MCS/RTD System : Issue resolved , AGV05 started to move ✅ Thank you July 16, 2025 at 10:52 PM, Nguyen Huy : @FA @MCS Please send AGV to take out and send the materials to warehouse from chamber 2-2 and 5-1 VD AN, we need to check those chambers, thank you July 16, 2025 at 10:57 PM, MCS/RTD System : Working on it July 16, 2025 at 11:03 PM, MCS/RTD System : Job initiated for 2-2 AN VD to STKA72, could you please change 5-1 VD to Auto mode currently manual, then I will send to STK. Thank you July 16, 2025 at 11:05 PM, Nguyen Huy : I'll talk with the VD op July 16, 2025 at 11:12 PM, Nguyen Huy : Operator has switched it, you can proceed now July 16, 2025 at 11:15 PM, MCS/RTD System : All done, Thank you July 16, 2025 at 11:19 PM, 원재 : @FA Please check NC An #1 Agv July 16, 2025 at 11:32 PM, Tasnim / Ivancsa FA : Please check NC An #4 Agv.. Thank you.. July 16, 2025 at 11:33 PM, Usukhuu /ivancsa FA : going after this July 16, 2025 at 11:33 PM, Tasnim / Ivancsa FA : Okay.. July 17, 2025 at 12:03 AM July 17, 2025 at 12:03 AM, Gua/ IvancsaFa : @MCS NC AN AGV#04 idle with material. Check this thank u! July 17, 2025 at 12:04 AM, MCS/RTD System : Working on it July 17, 2025 at 12:07 AM, MCS/RTD System : Issue resolved, AGV04 started to move. Thank you July 17, 2025 at 1:19 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 87, CA: 40 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 249, CA: 258 VD AN (Process Breakdown) UR: 00, Drying: 48 LR: 00, Wait:132, OOS: 16 VD CA (Process Breakdown) UR: 00, Drying: 56 ,LR: 00, Wait: 136 ,OOS: 04 Thank you July 17, 2025 at 1:21 AM, MCS/RTD System : @FA Please check Cathod Reel RTV error Thank you July 17, 2025 at 1:27 AM, MCS/RTD System : @FA Please check E0STKA51_C01 there is Ready off during Forking error. Thank you July 17, 2025 at 2:16 AM, 동현 : @FA Please check C1CNV072! The safety door error has been occured from the track position of 16001 July 17, 2025 at 2:23 AM, MCS/RTD System : @FA Please check C1SKTA52_C01 Load oversize error. Thank you July 17, 2025 at 2:29 AM, Usukhuu /ivancsa FA : @mcs chekc GF NC AN AGV#2 is being idle with plates inside July 17, 2025 at 2:29 AM, Shakir (MCS) : Checking July 17, 2025 at 2:31 AM, Shakir (MCS) : Issue resolved , AGV02 started to move ✅ Thank you July 17, 2025 at 2:33 AM, Yon Ko/연커/ : The Hungarian technicians are working inside the CNV. July 17, 2025 at 3:48 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 157, CA: 111 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 03 Post-Stock ➤ Stacking AN: 280, CA: 288 VD AN (Process Breakdown) UR: 00, Drying: 48 LR: 00, Wait:164, OOS: 16 VD CA (Process Breakdown) UR:02, Drying: 56 ,LR: 00, Wait: 164 ,OOS: 04 Thank you July 17, 2025 at 4:56 AM, MCS/RTD System : @FA Please check C1STKC71_P13/P14 Light curtain error. Thanks July 17, 2025 at 5:06 AM, 원재 : @FA Please check NC Ca RTV Up cylinder Error July 17, 2025 at 5:23 AM, MCS/RTD System : @FA Please check E0STKC51_C01 load oversize error. Thank you July 17, 2025 at 5:23 AM, Dániel Hufnágel : This message was deleted. July 17, 2025 at 5:24 AM, Dániel Hufnágel : Yes, already on the way July 17, 2025 at 5:25 AM, MCS/RTD System : Also please check STKC52 Cranes are not moving. Thank you July 17, 2025 at 5:31 AM, N.Zoli F.A. : Solved July 17, 2025 at 6:00 AM, MCS/RTD System : Please check again,Cranes are still not moving for STKC52. Thank you! July 17, 2025 at 6:08 AM, F.A.briczius Gergő : Jó reggelt! FA Iváncsa "C" shift (6:00-18:00) 12 Tech, 0 SL Beteg: 0 Szabadságon: 2 Helyettesítés: 0 Túlórás: 0 ———————————— Electrode (3) Simon Attlia Skwarek Tibor Viczai Tamás ———————————— Assembly 1F (2) Fabricius Gergő Kertész Dani ———————————— Assembly GF (4) Gégény Dávid Győri József Lajos Gábor Nagy Tamás ———————————— Formation/Modul (3) Csuti Zoli Döme György Harasztia Zoli July 17, 2025 at 6:20 AM, 김지수PM(Gyuri)_FA : @fa Please check E0STKC52 P02 > not moving July 17, 2025 at 6:21 AM, 안종수 : Dear FA. Please check GF STKA-71 UNK Plate. @FA July 17, 2025 at 6:22 AM, Gégény Dávid : I'm working on it. July 17, 2025 at 6:37 AM, Jun(정우준)_SKOH FA : Date: 2025.07.17 Time:06:00~18:00 Jun(정우준) PM Assy 송태용, 오은향 Hu OP: kovács László 5, Galambos MG OP: 1F - Amgaa (All) GF - Zaya (ST AN) - Dariimaa (ST CA) - Ganbaa (VD) BG OP: Atif July 17, 2025 at 6:46 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 203, CA: 124 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 302, CA: 307 VD AN (Process Breakdown) UR: 00, Drying: 08 LR: 02, Wait:196, OOS: 08 VD CA (Process Breakdown) UR:04, Drying: 08,LR: 00, Wait: 188,OOS: 04 Thank you very much! July 17, 2025 at 7:21 AM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01. It will further increase stacking materials delivery speed. Thank you very much! July 17, 2025 at 8:00 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 212, CA: 145 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02,CA: 01 Post-Stock ➤ Stacking AN: 271, CA: 303 VD AN (Process Breakdown) UR: 00, Drying: 24,LR: 02, Wait:184, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 28,LR: 00, Wait: 184,OOS: 04 Thank you very much! July 17, 2025 at 8:44 AM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+2 carriers from C1CNV072_M04. It will further increase stacking materials delivery speed. Thank you very much! July 17, 2025 at 8:45 AM, MCS/RTD System : @FA Please check C1STKC71_P13/14 there is light curtain errors. Thank you! July 17, 2025 at 8:47 AM, Dariimaa/다리마/Ivancsa : Solved July 17, 2025 at 8:47 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 9:19 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 215, CA: 139 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00,CA: 01 Post-Stock ➤ Stacking AN: 245, CA: 280 VD AN (Process Breakdown) UR: 00, Drying: 48,LR: 04, Wait:156, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 44,LR: 04, Wait: 164,OOS: 04 Thank you very much! July 17, 2025 at 9:22 AM, Spilka Sofia : Hello L4 ST 18 AGV 6 stopped,pls check. Thanks July 17, 2025 at 9:35 AM, MCS/RTD System : @FA Please check C1STKC71_P13/14 there is light curtain errors,some jobs are pending. Thank you! July 17, 2025 at 10:19 AM, MCS/RTD System : Dear @Pavel Please check and remove 1+1 carriers from C1CNV072_M04. It will further increase stacking materials delivery speed. Thank you very much! July 17, 2025 at 10:20 AM, MCS/RTD System : @FA @Dariimaa/다리마/Ivancsa Please check C1STKC71_P13/14 there is light curtain errors again some jobs are pending. Thank you! July 17, 2025 at 10:39 AM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 235, CA: 152 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 01,CA: 02 Post-Stock ➤ Stacking AN: 232, CA: 256 VD AN (Process Breakdown) UR: 00, Drying: 72 LR: 04, Wait:136, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 72,LR: 00, Wait: 140,OOS: 04 Thank you very much! July 17, 2025 at 10:46 AM, MCS/RTD System : This message was deleted. July 17, 2025 at 10:47 AM, MCS/RTD System : @FA @Dariimaa/다리마/Ivancsa Please check C1STKA71_P17/18 there is light curtain errors, jobs are pending. Thank you! July 17, 2025 at 10:49 AM, Zaya/ivancsa FA : solveed July 17, 2025 at 10:50 AM, Mohammad Amir : @Zaya/ivancsa FA Please check MLA1194 located at C1CNV072_16_089 it is not moving for while and affecting stacking materials delivery speed to Line 4&5&6. Everything is good from MCS RTD side ✅. Please check physically plate position. Thank you very much! July 17, 2025 at 10:50 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 11:01 AM, Zaya/ivancsa FA : solved July 17, 2025 at 11:07 AM, MCS/RTD System : Thank you very much! July 17, 2025 at 11:11 AM, 김동섭 : This message was deleted. July 17, 2025 at 11:47 AM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 263, CA: 152 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02,CA: 03 Post-Stock ➤ Stacking AN: 206, CA: 234 VD AN (Process Breakdown) UR: 03, Drying: 72 LR: 04, Wait:128, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 88,LR: 04, Wait: 120,OOS: 04 Thank you very much! July 17, 2025 at 11:59 AM, MCS/RTD System : @FA @Zaya/ivancsa FA Please check C1CNV072_16_094 there is RUN time over error and it is blocking stacking materials delivery. Please take action on this issue on priority. Thank you very much! July 17, 2025 at 12:03 PM, Dariimaa/다리마/Ivancsa : Solved July 17, 2025 at 12:03 PM, MCS/RTD System : @FA Please check C1CNV071_12_034 [Anode side] there is data mismatch error and it is blocking materials recovery. Thank you! July 17, 2025 at 12:03 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:05 PM, Dariimaa/다리마/Ivancsa : Solved July 17, 2025 at 12:05 PM, Mohammad Amir : Thank you very much! July 17, 2025 at 12:07 PM, Mohammad Amir : @Zaya/ivancsa FA @Dariimaa/다리마/Ivancsa Please check MLA6244 located at C1CNV072_16_088 it is not moving for while and affecting stacking materials delivery speed. Everything is good from MCS RTD side ✅. Please check physically plate position. Thank you very much! July 17, 2025 at 12:09 PM, MCS/RTD System : @Dariimaa/다리마/Ivancsa Could you please make C1CNV071_12_034 to auto mode ,it is currently Manual mode hence blocking materials recovery. Thank you very much! July 17, 2025 at 12:09 PM, Dariimaa/다리마/Ivancsa : Solved July 17, 2025 at 12:09 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:11 PM, Dariimaa/다리마/Ivancsa : Done July 17, 2025 at 12:11 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:24 PM, MCS/RTD System : @FA Please check NC AN Robot #1 ,it is OOS. Thank you very much! July 17, 2025 at 12:24 PM, Győri József F.A : Done July 17, 2025 at 12:25 PM, MCS/RTD System : Thank you very much July 17, 2025 at 12:32 PM, MCS/RTD System : Dear @Pavel @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M01. It will further increase stacking materials delivery speed. Thank you very much! July 17, 2025 at 12:34 PM, MCS/RTD System : Dear @Pavel Please also check and remove MLA6187 from C1CNV072_M04 as this carrier has a magazine MA3297 which is not closed. Thank you very much! July 17, 2025 at 12:34 PM, Pavel : @Karina July 17, 2025 at 12:35 PM, Mohammad Amir : @Karina Please check this issue. Thank you very much! July 17, 2025 at 12:36 PM, Karina : Of course, sorry July 17, 2025 at 12:37 PM, Mohammad Amir : No worries,Thank you very much! July 17, 2025 at 12:38 PM, Pavel : it's already done July 17, 2025 at 12:38 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:41 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 270, CA: 156 Pre-Stk ➤ Notching AN: 11, CA: 00 Pre-Stk ➤ VD AN: 00,CA: 03 Post-Stock ➤ Stacking AN: 188, CA: 208 VD AN (Process Breakdown) UR: 03, Drying: 76,LR: 06, Wait:116, OOS: 08 VD CA (Process Breakdown) UR:03, Drying: 96 ,LR: 04, Wait: 104,OOS: 04 Thank you very much! July 17, 2025 at 12:45 PM, MCS/RTD System : @FA @Dariimaa/다리마/Ivancsa Please check C1STKC71_P13/14 there is light curtain errors again some jobs are pending. Thank you! July 17, 2025 at 12:45 PM, Zaya/ivancsa FA : done July 17, 2025 at 12:46 PM, MCS/RTD System : Thank you very much! July 17, 2025 at 12:53 PM, QuangPhan : @FA NC AN robot #1 error. Thanks July 17, 2025 at 12:59 PM, Nagy Tamás FA : Done July 17, 2025 at 1:36 PM, 김동섭 : CA VD 3-7 P1,P2 plate seating is defective. Please use AGV to resettle July 17, 2025 at 2:34 PM, 김희래 : @MCS/RTD System Please check C0PVA030_p12. 6 Magazines are on the port but there is no transfer job. It seems like missing palletize report. July 17, 2025 at 2:35 PM, MCS/RTD System : Sure Sir,checking! July 17, 2025 at 2:37 PM, MCS/RTD System : Sir, Everything is good job is not progressing because destination NC4_3_P03 is OOS. @FA @Manufacturing, Please check NC AN 4-3 P03 ,it is OOS. Thank you very much! July 17, 2025 at 3:05 PM, Jun(정우준)_SKOH FA : @MCS/RTD System can you check available lot? July 17, 2025 at 3:05 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 293 , CA: 139 Pre-Stk ➤ Notching AN: 11, CA: 00 Pre-Stk ➤ VD AN: 02,CA: 00 Post-Stock ➤ Stacking AN: 181, CA: 202 VD AN (Process Breakdown) UR: 00, Drying: 84,LR: 04, Wait:108, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 100 ,LR: 04, Wait: 88,OOS: 04 Thank you very much! July 17, 2025 at 3:21 PM, Diana Erdeli : @ fa Please check AGV #8, stopped L3 ST 6. Thanks July 17, 2025 at 3:30 PM, MCS/RTD System : @FA Please check NC AN Robot #1. Thank you! July 17, 2025 at 4:45 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 307 , CA: 150 Pre-Stk ➤ Notching AN: 13, CA: 00 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 174, CA: 197 VD AN (Process Breakdown) UR: 04, Drying: 84,LR: 00, Wait:104, OOS: 08 VD CA (Process Breakdown) UR:12, Drying: 104 ,LR: 04, Wait: 72,OOS: 04 Thank you very much! July 17, 2025 at 5:08 PM, 이도형 (Lee) : @FA NC An #9 AGV ERROR. Please check. July 17, 2025 at 6:05 PM, MCS/RTD System : Good Evening @FA Please check Cathode Reel RTV error. Thank you July 17, 2025 at 6:21 PM, MCS/RTD System : Dear @All, Good evening GF Next Lot Quantity Availability GF NC Reel Available AN: 318 , CA: 139 Pre-Stk ➤ Notching AN: 12, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 01 Post-Stock ➤ Stacking AN: 182, CA: 213 VD AN (Process Breakdown) UR: 00, Drying: 76,LR: 06, Wait:100, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 100 ,LR: 00, Wait: 88,OOS: 08 Thank you July 17, 2025 at 6:43 PM, MCS/RTD System : @Usukhuu /ivancsa FA @Yon Ko/연커/ @waseem/ Iváncsa Fa Please check AGV07 error NC AN Thank you July 17, 2025 at 6:45 PM, Dániel Hufnágel : This message was deleted. July 17, 2025 at 6:46 PM, Dániel Hufnágel : Jó estét! FA "D" műszak:10/12 Overtime (0):- Sick (0): - Holiday (2): Kiss Balázs, Nagy Gábor Shift change(0): - Elektróda:(3) Oláh András, Szabadi Miklós, Novák Károly Assembly(4): Nagy Zsolt, Kasztel Balázs, Novák Zoltán, Kovács Szabika Modul(2): Zsurbej Zsolt, Martina Dávid July 17, 2025 at 6:52 PM, waseem/ Iváncsa Fa : Solved July 17, 2025 at 6:53 PM, MCS/RTD System : Thank you July 17, 2025 at 7:02 PM, 김지수PM(Gyuri)_FA : @fa Please check E0cnva51 > empty trays are not moving over 90mins July 17, 2025 at 7:05 PM, 김지수PM(Gyuri)_FA : E0stka52 > carriers on 6083 6084 track is not moving to reel slitter CNV July 17, 2025 at 7:13 PM, 김지수PM(Gyuri)_FA : @fa Please check c1cnv072> mlc2156 is not moving July 17, 2025 at 7:21 PM, Natsag/ Ivansca FA : done July 17, 2025 at 7:37 PM, 김지수PM(Gyuri)_FA : @Shakir (MCS) Could you please check LTA1125 LTA0275 LTA0681? July 17, 2025 at 7:37 PM, Shakir (MCS) : Checking July 17, 2025 at 7:37 PM, 김지수PM(Gyuri)_FA : This job was created from user or system? July 17, 2025 at 7:38 PM, Shakir (MCS) : Checking July 17, 2025 at 7:42 PM, Shakir (MCS) : TEMP UI created job for this carrier Thank you July 17, 2025 at 7:50 PM, 김지수PM(Gyuri)_FA : Thanks!! July 17, 2025 at 7:55 PM, MCS/RTD System : @FA please check E0STKC52 C02, MCP Auto manual mode error. Thank you July 17, 2025 at 8:06 PM, 김지수PM(Gyuri)_FA : @fa Please check C1stkc72 p02 port > key s/w off 2 carriers cannot move to circular cnv for 30mins thanks July 17, 2025 at 8:20 PM, Nguyen Huy : @FA Hello, NC CA Robot #2 Gripper #2 clamping moving time over error, pls check July 17, 2025 at 8:27 PM, 카스텔 발라지 F.A. : @Shakir (MCS) Hello! Please delete all magazin ID from C0PVC020_P14. I will take them out, because MC1286 magazine is damaged. Thank you very much! July 17, 2025 at 8:27 PM, Shakir (MCS) : Working on it Thank you July 17, 2025 at 8:29 PM, Shakir (MCS) : Done ✅ Data updated Thank you July 17, 2025 at 8:41 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 311 , CA: 124 Pre-Stk ➤ Notching AN: 03, CA: 00 Pre-Stk ➤ VD AN: 01, CA: 03 Post-Stock ➤ Stacking AN: 209, CA: 230 VD AN (Process Breakdown) UR: 00, Drying: 80,LR: 04, Wait:120, OOS: 08 VD CA (Process Breakdown) UR:12, Drying: 80 ,LR: 00, Wait: 104,OOS: 08 Thank you July 17, 2025 at 8:42 PM, waseem/ Iváncsa Fa : This message was deleted. July 17, 2025 at 8:43 PM, waseem/ Iváncsa Fa : Please check CA NA robot #2 July 17, 2025 at 9:36 PM, 원재 : @FA Please check NC Ca Agv#10 July 17, 2025 at 9:38 PM, 원재 : @FA NC Ca Agv#9,10 always stops at the same position and gives an alarm. Why? July 17, 2025 at 9:42 PM, 이한웅(삼구) : @이민재 July 17, 2025 at 9:48 PM, N.Zoli F.A. : sensor sees the column July 17, 2025 at 9:57 PM, waseem/ Iváncsa Fa : Align sw limit error July 17, 2025 at 10:08 PM, Dániel Hufnágel : Can you tell me where exactly? July 17, 2025 at 10:10 PM, 김지수PM(Gyuri)_FA : @manufacturing Please take 4plates out from the M04 July 17, 2025 at 10:10 PM, 김지수PM(Gyuri)_FA : C1cnv072 July 17, 2025 at 10:14 PM, Shakir (MCS) : Hello @Dániel Hufnágel For AGV10 NC CA Node Id 202 near 2-3_P03 occurred same alarm “Align sw limit” 4 times. Please check the align issue at 202 node id. Thank you July 17, 2025 at 10:15 PM, 이민재 : While moving from Node 91 to 92, the RSL sensor is being triggered by a pillar. July 17, 2025 at 10:17 PM, 김지수PM(Gyuri)_FA : Now the 7 carreirs have to be released from the M04 July 17, 2025 at 11:08 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 363, CA: 150 Pre-Stk ➤ Notching AN: 03, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 00 Post-Stock ➤ Stacking AN: 234, CA: 251 VD AN (Process Breakdown) UR: 04, Drying: 68,LR: 04, Wait:132, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 60 ,LR: 04, Wait: 124,OOS: 08 Thank you July 17, 2025 at 11:27 PM, MCS/RTD System : @FA Please check Cathode Reel RTV is OOS. Thank you July 17, 2025 at 11:53 PM, Dalai/ IvancsaFA : @mcs the carrier is not taking a pallet on this port C1STKC72_P10 GF VD CA please check it if it has an error July 17, 2025 at 11:56 PM, MCS/RTD System : In MCS Port P10/P09, there is no error, both ports are inservice. Thanks July 17, 2025 at 11:57 PM, Dalai/ IvancsaFA : Thank you July 17, 2025 at 11:57 PM, MCS/RTD System : Is there any plate on P10 ? July 17, 2025 at 11:57 PM, MJ/ Ivancsa FA : Yes July 17, 2025 at 11:58 PM, waseem/ Iváncsa Fa : Please check again CA NA AGV #10 is not working in the same place wandering around and with same error July 18, 2025 at 12:00 AM July 18, 2025 at 12:00 AM, MJ/ Ivancsa FA : Yes there is a material, it may not recognized by system. July 18, 2025 at 12:00 AM, MCS/RTD System : @FA Please check STKC72 Cranes are not moving. Thank you July 18, 2025 at 12:02 AM, MCS/RTD System : STK crane issue, its not moving that why plate not moving inside STK. July 18, 2025 at 12:03 AM, MCS/RTD System : @N.Zoli F.A. please check July 18, 2025 at 12:03 AM, Dániel Hufnágel : Checking July 18, 2025 at 12:03 AM, 카스텔 발라지 F.A. : I'm on the way July 18, 2025 at 1:48 AM, Nguyen Huy : @FA @MCS VD CA 5-3 finished but AGV only take out 2 plates, 2 plates still left inside, pls check July 18, 2025 at 1:48 AM, MCS/RTD System : Checking July 18, 2025 at 1:53 AM, MCS/RTD System : There Carrier ID was null when there was UR from VD CA 5-3 P01/P02. I will initiate the transfer command to warehouse. Thank you July 18, 2025 at 1:56 AM, Nguyen Huy : Thank you for your help!! July 18, 2025 at 2:00 AM, MCS/RTD System : Job initiated to STKC72 and AGV assigned. Thank you July 18, 2025 at 2:01 AM, 고병식 : @FA please check C1STKC71 Light curtain error. July 18, 2025 at 2:04 AM, Dániel Hufnágel : On my way July 18, 2025 at 2:30 AM, MCS/RTD System : @FA Please check E0STKA51_P04 run time error. Thank you July 18, 2025 at 2:52 AM, Novák Károly F. A. : Solved July 18, 2025 at 3:23 AM, 고병식 : This message was deleted. July 18, 2025 at 3:26 AM, 고병식 : @FA please check C2CNV072_m01 Light curtain error. July 18, 2025 at 4:23 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 455, CA: 238 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 01 Post-Stock ➤ Stacking AN: 300, CA: 322 VD AN (Process Breakdown) UR: 00, Drying: 04,LR: 00, Wait:196, OOS: 12 VD CA (Process Breakdown) UR:00, Drying: 04 ,LR: 00, Wait: 192,OOS: 04 Thank you July 18, 2025 at 6:19 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 476, CA: 255 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 308, CA: 333 VD AN (Process Breakdown) UR: 00, Drying: 08,LR: 00, Wait:204 OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 08,LR: 00, Wait: 200,OOS: 04 Thank you very much! July 18, 2025 at 6:34 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 8 Technician, 1 Sl, 1 Overtime ———————————— Electrode (3): Cehmann Zsolt Gutenkunst Ábel Zoltán Benczik Ádám ———————————— Assembly(4+1): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(1): Csepi Árpád ———————————— July 18, 2025 at 6:35 AM, Hồng Anh SL NC&VD 1F : @Mohammad Amir @FA team good morning everyone! Can you pls check for plates list that all off plates release done or no? I saw the information seem like not release yet, i get the information that we need re-vacuum after release. AN : MLA9229 MLA5155 MLA6057 MLA7018 CA : MLC6195 MLC6167 MLC5017 MLC9139 Thank you very much! July 18, 2025 at 6:37 AM, Mohammad Amir : Good morning, Checking . Thank you very much! July 18, 2025 at 6:41 AM, Mohammad Amir : Good morning, After investigation I have found that all the mentioned carrier still on the hold from RTD side , that's why it couldn't be released. The reason for hold is that as well already mentioned it had some duplicated magazine , unfortunately i don't have authority to release hold. Please write an IT ticket to RTD team and our seniors will reflect on it. Feel free to ask me if you need any further information. Thank you very much! July 18, 2025 at 6:55 AM, Mohammad Amir : Good morning @FA, For your kind information:- Currently the following AGVs battery is less than 50%. Area:-NC AN. AGV1:- 48 %{idle} AGV7:-46%{Performaning Tasks} AGV10:47%{idle} Thank you very much! July 18, 2025 at 7:01 AM, F.A.briczius Gergő : Thank you for your information ! July 18, 2025 at 7:01 AM, Mohammad Amir : You are most welcome! July 18, 2025 at 7:04 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 482, CA: 263 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 01 Post-Stock ➤ Stacking AN: 295, CA: 328 VD AN (Process Breakdown) UR: 00, Drying: 12 ,LR: 00, Wait:200 OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 08,LR: 04, Wait: 196,OOS: 04 Thank you very much! July 18, 2025 at 7:17 AM, MCS/RTD System : @FA Please check C1CNV072_16_067 it is in Manual mode make it automatically. Thank you! July 18, 2025 at 7:24 AM, Mohammad Amir : Dear @Mr.Miti (미티) FA Good morning, Please investigate Port C1CNV072_16_067 since morning 5 AM this is the following downtime. Majorly occured Error -Data mismatch error. 5:35-OOS 5:37-OOS 5:59-OOS 6:01-OOS 6:02-OOS 6:37 -OOS 6:42 -OOS 7:07-OOS 7:09-OOS 7:15-OOS. Effect :-It is affecting Stacking materials delivery speed. Thank you very much! July 18, 2025 at 7:27 AM, Yon Ko/연커/ : Empty plates are causing an error when they arrive. Im Checking and working on it. Thank u! July 18, 2025 at 7:27 AM, MCS/RTD System : Good morning @Manufacturing Please remove MLC2114 located at C1CNV072_M01 ,issue is MGZ MC2420 is not closed. Thank you! July 18, 2025 at 7:28 AM, MCS/RTD System : This message was deleted. July 18, 2025 at 7:28 AM, MCS/RTD System : Thank you very much ! July 18, 2025 at 7:30 AM, MCS/RTD System : Dear @Pavel @Manufacturing Please check and remove 1+1 carriers from C1CNV072_M04. It will further increase stacking materials delivery speed. Thank you very much! July 18, 2025 at 7:33 AM, Pavel : @Spilka Sofia @Anita Mirosnicsenko July 18, 2025 at 7:45 AM, MCS/RTD System : @Yon Ko/연커/ This phenomenon keep occurring,are you checking it? Thank you ! July 18, 2025 at 7:46 AM, Yon Ko/연커/ : Right now im working on it give a sec thank u! July 18, 2025 at 7:47 AM, MCS/RTD System : Thank you! July 18, 2025 at 7:58 AM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+2 arriers from C1CNV072_M01. It will further increase stacking materials delivery speed. Thank you very much! July 18, 2025 at 8:01 AM, 이도형 (Lee) : @FA VD An C1CNV071-CV02-MCP#1 stopped. Please check. July 18, 2025 at 8:03 AM, MCS/RTD System : @FA Please check C1STKA72_P21 there is RUN TIME over error and it is blocking materials recovery. Thank you! July 18, 2025 at 8:08 AM, Yon Ko/연커/ : Solved July 18, 2025 at 8:09 AM, Mr.Miti (미티) FA : Solved. July 18, 2025 at 8:16 AM, 김주연 : @조립제조 공유드립니다. 금일 9시부터 GF VD 음극 AGV 대상으로 패치 진행 예정입니다. - 소요시간 : AGV 1대당 15분씩 - 패치내용 : AGV 이적재시 화물 미감지로 인한 사고방지를 위해, 이적재시 화물감지 센서 2EA 모두 OFF 일경우 CARGO STATIS ABNORMAL 알람 발생 (메일도 함께 공유드렸습니다.) 참고내용 1. 7/17 GF VD 음극 AGV#4 인터락 적용 및 프로그램 업데이트 완료 후 테스트 진행 시 특이사항 없음 2. 음극 전호기 횡전개 후 모니터링 예정 (금일 10시~) 감사합니다. July 18, 2025 at 8:34 AM, Sazzad Bhai SKon : @FA Magazine MA1302 is suspected to be duplicated. Please confirm the magazines from this plate: MLA6079 (C1STKA72, 0200205): MA6443, 1302, 4089, 3003, 4518, 6410 July 18, 2025 at 8:46 AM, F.A.briczius Gergő : Checking July 18, 2025 at 8:48 AM, MCS/RTD System : @FA Please check C1STKC71_P13/14 there is light curtain errors again some jobs are pending. Thank you! July 18, 2025 at 8:50 AM, F.A.briczius Gergő : On way July 18, 2025 at 8:51 AM, F.A.briczius Gergő : Done July 18, 2025 at 8:54 AM, MCS/RTD System : @Yon Ko/연커/ Please check C1CNV072_16_058 there is data mismatch error. Thank you! July 18, 2025 at 8:55 AM, Khaliun/Ivancsa FA : Solved July 18, 2025 at 8:57 AM, F.A.briczius Gergő : MLA6079 has absolute different magazines on. I took it out and I scan and send back now. July 18, 2025 at 8:59 AM, Sazzad Bhai SKon : This is the cause for hold status of other carries. Thank you for checking. July 18, 2025 at 9:02 AM, F.A.briczius Gergő : Done. You are most welcome! July 18, 2025 at 9:07 AM, Sazzad Bhai SKon : @FA Another magazine MC2427 is suspected to be duplicated. Please confirm the magazines Plate 1: MLC6007 (C1STKC72, 0205406): MC6257, 1469, 6297, 1338, 3149, 2427) Plate 2: MLC6005 (C1STKC72, 0100506) July 18, 2025 at 9:18 AM, MCS/RTD System : Good morning everyone, GF Next Lot Quantity Availability GF NC Reel Available AN: 482, CA: 294 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 258,CA: 299 VD AN (Process Breakdown) UR: 00, Drying: 24 ,LR: 08, Wait:176, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 28,LR: 04, Wait: 176,OOS: 08 Thank you very much! July 18, 2025 at 9:35 AM, F.A.briczius Gergő : Sorry about my late reply, we had several small errors. I am going to check now. July 18, 2025 at 9:51 AM, F.A.briczius Gergő : Yes. It is duplicated! I took out the MLC6005. I left the cart at the area next to the chamber 6-10 (#55), with the plate and magazines on. (MC2427) July 18, 2025 at 9:58 AM, Sazzad Bhai SKon : @KIM SEYEON [김세연]_FA hello pm, MC2427 is duplicated July 18, 2025 at 10:03 AM, P.Bence A SSL : @Sazzad Bhai SKon L2 dont have ca full mgz Why ? July 18, 2025 at 10:03 AM, P.Bence A SSL : Stacking * July 18, 2025 at 10:03 AM, MCS/RTD System : Checking July 18, 2025 at 10:05 AM, MCS/RTD System : @Yon Ko/연커/ Please check MLA6099 located at C1CNV072_16_153 it is not moving and blocking stacking materials delivery. Thank you very much! July 18, 2025 at 10:05 AM, MCS/RTD System : @P.Bence A SSL This is the issue which causing delay in material transfer. Thank you! July 18, 2025 at 10:12 AM, Mohammad Amir : Update:- Issue has been resolved ✅ Now AGV#7 on the way to Line -2 with CA materia MLC4113. I am monitoring the stacking line with extra precautions untill situation becomes normal. Thank you very much! July 18, 2025 at 10:21 AM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+4 arriers from C1CNV072_M04. It will further increase stacking materials delivery speed. Please remove it quickly as there is shortages of stacking materials in line 1&2&3. Thank you very much! July 18, 2025 at 10:23 AM, MCS/RTD System : This message was deleted. July 18, 2025 at 10:23 AM, MCS/RTD System : Dear @Manufacturing Please check and remove 1+5 arriers from C1CNV072_M01 as well. It will increase stacking materials delivery speed more. Thank you very much! July 18, 2025 at 10:25 AM, P.Bence A SSL : Check L2 stacking LR request thank you @MCS/RTD System July 18, 2025 at 10:30 AM, Mohammad Amir : Hello, Currently we have materials request from the following machines:- Line 2-2,2-3,2-8,2-20 but unfortunately there was no free materials available on the O/P ports of the CNV as soon as it will be free it will go to these lines. And currently AGV#5 is bringing MLC4218 to Line 2-14_P02 ✅ Now issue has resolved so materials delivery will be normalized as well,I am monitoring. Thank you very much! July 18, 2025 at 11:06 AM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 482, CA: 294 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 02, CA: 02 Post-Stock ➤ Stacking AN: 255,CA: 241 VD AN (Process Breakdown) UR: 00, Drying: 24 ,LR: 08, Wait:176, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 28,LR: 02,Wait: 172,OOS: 08 Thank you very much! July 18, 2025 at 12:04 PM, Anita Mirosnicsenko : Hello! Line 3 STK AGV #2 Stopped, please check! Thank you!) July 18, 2025 at 1:16 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 467, CA: 292 Pre-Stk ➤ Notching AN: 34 , CA: 38 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 149,CA: 187 VD AN (Process Breakdown) UR: 02, Drying: 104 ,LR: 04, Wait:104 OOS: 08 VD CA (Process Breakdown) UR:04, Drying: 88,LR: 06,Wait: 116 OOS: 04 Thank you very much! July 18, 2025 at 2:11 PM, Sazzad Bhai SKon : @FA Can you check whether C1STKA72 (0104207) has any material? Because there is an existing job failed due to "Empty Release Error". That means the shelf is empty July 18, 2025 at 2:13 PM, MCS/RTD System : @FA Please check Cathode Reel RTV is OOS. Thank you July 18, 2025 at 2:35 PM, F.A.briczius Gergő : I am going to check July 18, 2025 at 2:35 PM, MCS/RTD System : @FA @Yon Ko/연커/ Please chcek VD AN AGV#6 it is in error and blocking other AGVs ,tasks are getting delayed. Thank you! July 18, 2025 at 2:38 PM, F.A.briczius Gergő : It is empty July 18, 2025 at 2:39 PM, Nandia FA : solved July 18, 2025 at 2:39 PM, MCS/RTD System : Thank you very much! July 18, 2025 at 2:46 PM, MCS/RTD System : @FA Please check C1STKC71_P13/14 there is light curtain errors again some jobs are pending. Thank you! July 18, 2025 at 2:51 PM, Mohammad Amir : Dear @FA, For your kind information:- Currently the following AGVs battery is less than 50%. Area:-NC AN. AGV1:- 48 %{idle} AGV7:-48%{Performaning Tasks} Please make sure that this AGVs are good on charge to avoid AGVs Blackout. Thank you very much! July 18, 2025 at 3:01 PM, Sazzad Bhai SKon : Thank you. Please delete the information from scs as well. July 18, 2025 at 3:04 PM, 최태영 : @FA Please check AN NC agv #5. Is it charging now? July 18, 2025 at 3:04 PM, 최태영 : 노칭 음극 5호기 혹시 작업중인가요? July 18, 2025 at 3:07 PM, F.A.briczius Gergő : Unfortunately I can not delete the information. I have permission. July 18, 2025 at 3:07 PM, 최태영 : done July 18, 2025 at 3:07 PM, F.A.briczius Gergő : No, it isn't. July 18, 2025 at 3:11 PM, F.A.briczius Gergő : Done July 18, 2025 at 3:13 PM, MCS/RTD System : Thank you very much! July 18, 2025 at 3:14 PM, 최태영 : If Agv is located between node 174~170, it makes Agv blocked. (near charger) July 18, 2025 at 3:15 PM, 최태영 : AN NC agv #3 is OoS again. July 18, 2025 at 3:17 PM, F.A.briczius Gergő : I am on way July 18, 2025 at 3:19 PM, F.A.briczius Gergő : Colleagues are working on July 18, 2025 at 3:26 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 429, CA: 281 Pre-Stk ➤ Notching AN: 23, CA: 17 Pre-Stk ➤ VD AN: 01, CA: 00 Post-Stock ➤ Stacking AN: 142,CA: 177 VD AN (Process Breakdown) UR: 08, Drying: 100 ,LR: 04, Wait:100, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 108,LR: 06,Wait: 85 OOS: 04 Thank you very much! July 18, 2025 at 3:33 PM, MCS/RTD System : @FA Please check C1STKC71_C01 there is Ready off during forking error and empty magazines delivery has stopped. Thank you! July 18, 2025 at 4:39 PM, Mohammad Amir : Dear @FA, For your kind information:- Currently the following AGVs battery is less than 50%. Area:-NC CA AGV3:- 46% AGV10 -46% AGV04- 48% Please make sure that this AGVs are good on charg to avoid AGVs Blackout. Thank you very much! July 18, 2025 at 4:47 PM, MCS/RTD System : @FA Please check STKC52_C02 there is MCP control power CP trip error. Thank you! July 18, 2025 at 4:52 PM, F.A.briczius Gergő : On way July 18, 2025 at 5:06 PM, MCS/RTD System : Dear @All, GF Next Lot Quantity Availability GF NC Reel Available AN: 427, CA: 298 Pre-Stk ➤ Notching AN: 24, CA: 25 Pre-Stk ➤ VD AN: 02, CA: 00 Post-Stock ➤ Stacking AN: 160,CA: 179 VD AN (Process Breakdown) UR: 06, Drying: 88 ,LR: 04, Wait:108, OOS: 12 VD CA (Process Breakdown) UR:07, Drying: 100,LR: 04,Wait: 97 OOS: 04 Thank you very much! July 18, 2025 at 6:00 PM, MCS/RTD System : @FA Please check Cathode Reel STK C52-C02 Load oversize error. July 18, 2025 at 6:01 PM, Böröczki Balázs : Checking. July 18, 2025 at 6:22 PM, Csanálosi Gábor FA : Jó estét! Good evening! FA Tech. "B" műszak 2025.07.18. 11 Tech,+1 overtime 0SL Overtime(1): Szabadi Miklós Holiday(2): Szücs Géza Imre, Takács Ádám Sick(0): Shift Change(0): --------------- Electrode(5): Rácz Dániel, Csanálosi Gábor, Böröcz Tamás, Szabadi Miklós, Czeilinger Krisztián --------------- Assy GF (2): Böröczki Balázs, Kovács Ágnes NC OP: Gombos Norbert(OP), Nagy Sándor (OP) --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert, --------------- Form/Modul(3): Boromisza Zolt July 18, 2025 at 6:51 PM, MCS/RTD System : @FA Please check Cathode Reel conveyor C52 LTC1302 on the RTV is not unloading to the M10(9037). July 18, 2025 at 6:52 PM, Böröczki Balázs : Checking. July 18, 2025 at 8:02 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 409, CA: 303 Pre-Stk ➤ Notching AN: 13, CA: 20 Pre-Stk ➤ VD AN: 03, CA: 01 Post-Stock ➤ Stacking AN: 193, CA: 211 VD AN (Process Breakdown) UR: 04, Drying: 88 ,LR: 02, Wait:112, OOS: 12 VD CA (Process Breakdown) UR:07, Drying: 68 ,LR: 06, Wait: 125 OOS:04 July 18, 2025 at 10:37 PM, MCS/RTD System : @AGV Please check AGV #1 Anode VD In front of machine 1/6 July 19, 2025 at 12:12 AM July 19, 2025 at 12:12 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 351, CA: 357 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 00, CA: 03 Post-Stock ➤ Stacking AN: 251 , CA: 238 VD AN (Process Breakdown) UR: 00, Drying: 48 ,LR: 02, Wait:147, OOS: 08 VD CA (Process Breakdown) UR:04, Drying: 68 ,LR: 04 , Wait: 118 , OOS:04 July 19, 2025 at 12:20 AM, Lan Nhi : @FA Hello. Please check and load 2 more pallets into the 6-9 VD/CA machine for me. Thank you. July 19, 2025 at 12:25 AM, VK (mcs) : VD cathode 6/9 After receiving load request RTD received load and unload complete report. It seems carriers manually transferred to port 1. Please apply load request for empty ports.1&2 July 19, 2025 at 12:26 AM, Lan Nhi : Yes. Thank you July 19, 2025 at 1:02 AM, Truong : NC AN agv #4 error please come check @FA July 19, 2025 at 1:07 AM, Zulaa/졸라/Ivancsa FA : Solved July 19, 2025 at 2:18 AM, Lan Nhi : @FA Hello. agv #7 NC. Error on machine 6/3. Please check for me. July 19, 2025 at 3:33 AM, MCS/RTD System : @FA Please check Cathode Reel STKC51 C01 Load oversize error. July 19, 2025 at 3:40 AM, Csanálosi Gábor FA : @Kovács Ágnes @Böröczki Balázs July 19, 2025 at 3:40 AM, Böröczki Balázs : Checking. July 19, 2025 at 3:41 AM, Böröczki Balázs : Bocsi má', éppen másik hibát oldottam meg. July 19, 2025 at 5:03 AM, 원재 : @FA please check NC Ca AGV#10 July 19, 2025 at 5:03 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 368, CA: 408 Pre-Stk ➤ Notching AN: 00, CA: 00 Pre-Stk ➤ VD AN: 03, CA: 01 Post-Stock ➤ Stacking AN: 279 , CA: 285 VD AN (Process Breakdown) UR: 00, Drying: 16 ,LR: 00, Wait:166, OOS: 12 VD CA (Process Breakdown) UR:12, Drying: 32 ,LR: 04 , Wait: 158 , OOS:04 July 19, 2025 at 5:04 AM, Kaniz / Ivancsa FA : It is okay July 19, 2025 at 6:12 AM, Victory : Good morning, Pls assign the AGV to come to #54(6-9) in order to remove the full MGZ. Tks July 19, 2025 at 6:13 AM, Mr.Miti (미티) FA : Good Morning! FA Iváncsa "A" shift (06:00 - 18:00) 11 Technician, 1 Sl, Overtime ———————————— Electrode (2): Cehmann Zsolt Gutenkunst Ábel Zoltán ———————————— Assembly(4): Nagy Tibor Bonnyai Ákos Vékony Ferenc Sopronyi Gábor Attila ———————————— Formation/Modul(2+1): Brázik János Csepi Árpád ———————————— July 19, 2025 at 6:20 AM, Shahbaz 샤바즈 MCS/RTD : Good morning! Is it CA VD 6-9 half chamber? July 19, 2025 at 6:53 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 382 CA: 424 Pre-Stk ➤ Notching AN: 00 CA: 00 Pre-Stk ➤ VD AN: 01 CA: 02 Post-Stock ➤ Stacking AN: 268 CA: 289 VD AN (Process Breakdown) UR: 00 Drying: 32 LR: 00 Wait: 166 OOS: 04 VD CA (Process Breakdown) UR: 00 Drying: 24 LR: 00 Wait: 160 OOS: 12 July 19, 2025 at 7:19 AM, MCS/RTD System : @FA Please check E0STKC51_C02 " Load position error " Thank you July 19, 2025 at 8:35 AM, Anita Mirosnicsenko : Hello! Line 3 STK AGV#2 stopped, please check. Thank you! July 19, 2025 at 8:43 AM, MCS/RTD System : @FA Transfer commands are still there for LTC1856 in E0STKC52 and LTC0910 in E0STKC51. That's why the next trays are not moving. Please remove those commands from CCS. Thank you July 19, 2025 at 8:48 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check this reel storage. July 19, 2025 at 8:48 AM, Anita Mirosnicsenko : Line 2 STK AGV #09 stopped, please check! Thank you! July 19, 2025 at 8:48 AM, MCS/RTD System : Transfer commands from SCS* July 19, 2025 at 8:48 AM, KIM SEYEON [김세연]_FA : @Yon Ko/연커/ please check this July 19, 2025 at 8:50 AM, Mr.Miti (미티) FA : Solved July 19, 2025 at 9:00 AM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 383 CA: 456 Pre-Stk ➤ Notching AN: 07 CA: 00 Pre-Stk ➤ VD AN: 00 CA: 03 Post-Stock ➤ Stacking AN: 219 CA: 261 VD AN (Process Breakdown) UR: 00 Drying: 52 LR: 00 Wait: 145 OOS: 04 VD CA (Process Breakdown) UR: 00 Drying: 52 LR: 04 Wait: 133 OOS: 12 July 19, 2025 at 9:20 AM, P.Bence A SSL : L2 stacking Agv stop please check thank you July 19, 2025 at 9:36 AM, Anita Mirosnicsenko : @MCS/RTD System Line 3 STK: the AGV is not bringing full magazines and also not taking away the empty ones. Please check what the issue is. Thank you! July 19, 2025 at 9:38 AM, Usukhuu /ivancsa FA : all the AGV's are busy July 19, 2025 at 9:42 AM, MCS/RTD System : There are already transfer commands, and plates are waiting for AGVs. July 19, 2025 at 10:13 AM, KIM SEYEON [김세연]_FA : @Mr.Miti (미티) FA please check E0STKA52 error. Oversize. July 19, 2025 at 10:14 AM, Mr.Miti (미티) FA : We were there for education. July 19, 2025 at 10:14 AM, Mr.Miti (미티) FA : 😇 July 19, 2025 at 10:14 AM, KIM SEYEON [김세연]_FA : okay thanks July 19, 2025 at 10:14 AM, Mr.Miti (미티) FA : You’re welcome July 19, 2025 at 12:26 PM, P.Bence A SSL : Line 2 stacking agv5 stop please check thank you . July 19, 2025 at 1:07 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 422 CA: 543 Pre-Stk ➤ Notching AN: 55 CA: 33 Pre-Stk ➤ VD AN: 02 CA: 02 Post-Stock ➤ Stacking AN: 139 CA: 167 VD AN (Process Breakdown) UR: 00 Drying: 76 LR: 06 Wait: 89 OOS: 04 VD CA (Process Breakdown) UR: 02 Drying: 80 LR: 04 Wait: 113 OOS: 08 July 19, 2025 at 1:32 PM, 김지수PM(Gyuri)_FA : @fa Please check E0CNVC52 > not moving with carrier(LTC1004) July 19, 2025 at 1:35 PM, 김지수PM(Gyuri)_FA : It has been stopping since 10:37 July 19, 2025 at 1:37 PM, 김지수PM(Gyuri)_FA : @Mr.Miti (미티) FA July 19, 2025 at 1:48 PM, Mr.Miti (미티) FA : Solved by technicans July 19, 2025 at 1:48 PM, 김지수PM(Gyuri)_FA : Thanks!! July 19, 2025 at 1:48 PM, Mr.Miti (미티) FA : Me too! (thumbsup) July 19, 2025 at 2:09 PM, Yon Ko/연커/ : @FA Tech NC AN ROBOT 1 check. Thank u! July 19, 2025 at 2:14 PM, MCS/RTD System : @FA Please check E0CNVC52 "Data loss error" Thank you July 19, 2025 at 2:34 PM, Nguyên : Pls fix plate position on chamber 24(3/6) VD AN GF Thank you July 19, 2025 at 2:35 PM, 이도형 (Lee) : @FA VD An #7 AGV is stopped. Please check. July 19, 2025 at 2:36 PM, 정은탁 (Jung EunTak) : @FA Please check VD half chamber. I requested a manual LR, but it was useless. An' 1-1 18th 20:32~ 1-2 19th 00:24~ 1-4 18th 22:06~ 1-7 19th 01:18~ 1-8 19th 01:29~ 2-5 19th 02:13~ Ca' 6-9 18th 13:51~ July 19, 2025 at 3:03 PM, MCS/RTD System : This message was deleted. July 19, 2025 at 3:05 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 412 CA: 538 Pre-Stk ➤ Notching AN: 55 CA: 29 Pre-Stk ➤ VD AN: 00 CA: 01 Post-Stock ➤ Stacking AN: 142 CA: 189 VD CA (Process Breakdown) UR: 00 Drying: 84 LR: 04 Wait: 105 OOS: 04 VD AN (Process Breakdown) UR: 04 Drying: 80 LR: 04 Wait: 106 OOS: 08 July 19, 2025 at 3:19 PM, MCS/RTD System : @FA Please check C1STKC71 "Ready off during forking" Thank you July 19, 2025 at 3:34 PM, 이도형 (Lee) : @지석범PM (이반차FA) PM님 An VD 3-6 안착불량 입니다. 재안착 부탁드립니다. July 19, 2025 at 3:40 PM, Yon Ko/연커/ : Done. July 19, 2025 at 5:23 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 431 CA: 540 Pre-Stk ➤ Notching AN: 51 CA: 27 Pre-Stk ➤ VD AN: 02 CA: 01 Post-Stock ➤ Stacking AN: 152 CA: 210 VD CA (Process Breakdown) UR: 00 Drying: 76 LR: 04 Wait: 117 OOS: 08 VD AN (Process Breakdown) UR: 00 Drying: 68 LR: 00 Wait: 113 OOS: 08 July 19, 2025 at 5:44 PM, Nguyên : NC AN GF C2STKA71-P11-MCP Error Come for me July 19, 2025 at 6:18 PM, 김현태 : @ MCS LR Check please July 19, 2025 at 6:26 PM, Szücs Géza FT-B : Jó estét! Good evening! 2025.07.19. "B" műszak, 10Tech, 1OP, 1Sup, 1SL Overtime(0): Holiday(2): Takács Ádám, Gombos Norbert(OP) Sick(1): Gerbovits Kevin Shift Change(0): Translater: --------------- Electrode(4): Czeilinger Krisztián, Böröcz Tamás, Rácz Dániel, Csanálosi Gábor --------------- Assy GF (2): Kovács Ágnes, Böröczki Balázs NC Op: Nagy Sándor --------------- Assy 1F (2): Pintye Miklós, Pálosi Róbert --------------- Formation/Modul(2): Denkó János, Boromissza Zoltán ------------ July 19, 2025 at 6:29 PM, VK (mcs) : Anode VD For all machines we received load request at 18:9 Problem is RTD was received several times LR since yesterday and whenever new LR appears then machine goes to the end of queue, considering that there is 113 ports are in the list.this is the reason of transfer delay. For solution I can transfer half chambers to post STK and then machine needs new LR for all ports or waite till their turn. July 19, 2025 at 6:47 PM, 김현태 : Thanks you July 19, 2025 at 6:48 PM, VK (mcs) : Do you want to me to transfer half chamber materials to Post -STK? July 19, 2025 at 6:59 PM, 김현태 : Just VD AN. Please move it Thanks you July 19, 2025 at 6:59 PM, VK (mcs) : Sure July 19, 2025 at 7:04 PM, VK (mcs) : Transport job created @AGV There will be AGV error during unloading carriers on AGV, please consider it VD anode 1/1. 1/2. 1/4. 1/7. 1/8. And 2/5 Please notice, each carrier assigned to one AGV, thx July 19, 2025 at 7:11 PM, 김현태 : FA is fixing it. Thanks you July 19, 2025 at 7:20 PM, Xeng : NC CA agv#10 error not moving please come check July 19, 2025 at 7:47 PM, Hữu Thắng : @FA The problem occcurred . Could you please check it . Thank you July 19, 2025 at 8:15 PM, VK (mcs) : AN VD 1/1. 1/2. 1/4. 1/7. 1/8 and 2/5 are empty now. Please apply LR for them. Thx July 19, 2025 at 8:16 PM, 김현태 : Thanks you July 19, 2025 at 8:19 PM, QuangPhan : Hello! @FA NC AN robot #3 error. Thanks July 19, 2025 at 8:24 PM, Kovács Ágnes : Solved July 19, 2025 at 8:29 PM, MCS/RTD System : GF Next Lot Quantity Availability GF NC Reel Available AN: 429, CA: 527 Pre-Stk ➤ Notching AN: 34, CA: 14 Pre-Stk ➤ VD AN: 00, CA: 02 Post-Stock ➤ Stacking AN: 162 , CA: 216 VD AN (Process Breakdown) UR: 13, Drying: 68 ,LR: 12, Wait:94, OOS: 08 VD CA (Process Breakdown) UR:00, Drying: 76 ,LR: 02 , Wait: 113 , OOS:04